From: Heiner Kallweit Date: Mon, 25 Mar 2019 18:35:41 +0000 (+0100) Subject: net: phy: marvell: add PHY tunable fast link down support for 88E1540 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=69f42be8af7158e6f10eecde20036cb411bd78f2;p=openwrt%2Fstaging%2Fblogic.git net: phy: marvell: add PHY tunable fast link down support for 88E1540 1000BaseT standard requires that a link is reported as down earliest after 750ms. Several use case however require a much faster detecion of a broken link. Fast Link Down supports this by intentionally violating a the standard. This patch exposes the Fast Link Down feature of 88E1540 and 88E6390. These PHY's can be found as internal PHY's in several switches: 88E6352, 88E6240, 88E6176, 88E6172, and 88E6390(X). Fast Link Down and EEE are mutually exclusive. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 3ccba37bd6dd..65350186d514 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -91,6 +92,14 @@ #define MII_88E1510_TEMP_SENSOR 0x1b #define MII_88E1510_TEMP_SENSOR_MASK 0xff +#define MII_88E1540_COPPER_CTRL3 0x1a +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK GENMASK(11, 10) +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS 0 +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS 1 +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS 2 +#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS 3 +#define MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN BIT(9) + #define MII_88E6390_MISC_TEST 0x1b #define MII_88E6390_MISC_TEST_SAMPLE_1S 0 #define MII_88E6390_MISC_TEST_SAMPLE_10MS BIT(14) @@ -1025,6 +1034,101 @@ static int m88e1145_config_init(struct phy_device *phydev) return 0; } +static int m88e1540_get_fld(struct phy_device *phydev, u8 *msecs) +{ + int val; + + val = phy_read(phydev, MII_88E1540_COPPER_CTRL3); + if (val < 0) + return val; + + if (!(val & MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN)) { + *msecs = ETHTOOL_PHY_FAST_LINK_DOWN_OFF; + return 0; + } + + val = FIELD_GET(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val); + + switch (val) { + case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS: + *msecs = 0; + break; + case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS: + *msecs = 10; + break; + case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS: + *msecs = 20; + break; + case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS: + *msecs = 40; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int m88e1540_set_fld(struct phy_device *phydev, const u8 *msecs) +{ + struct ethtool_eee eee; + int val, ret; + + if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_OFF) + return phy_clear_bits(phydev, MII_88E1540_COPPER_CTRL3, + MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN); + + /* According to the Marvell data sheet EEE must be disabled for + * Fast Link Down detection to work properly + */ + ret = phy_ethtool_get_eee(phydev, &eee); + if (!ret && eee.eee_enabled) { + phydev_warn(phydev, "Fast Link Down detection requires EEE to be disabled!\n"); + return -EBUSY; + } + + if (*msecs <= 5) + val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS; + else if (*msecs <= 15) + val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS; + else if (*msecs <= 30) + val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS; + else + val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS; + + val = FIELD_PREP(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val); + + ret = phy_modify(phydev, MII_88E1540_COPPER_CTRL3, + MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val); + if (ret) + return ret; + + return phy_set_bits(phydev, MII_88E1540_COPPER_CTRL3, + MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN); +} + +static int m88e1540_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_FAST_LINK_DOWN: + return m88e1540_get_fld(phydev, data); + default: + return -EOPNOTSUPP; + } +} + +static int m88e1540_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_FAST_LINK_DOWN: + return m88e1540_set_fld(phydev, data); + default: + return -EOPNOTSUPP; + } +} + /* The VOD can be out of specification on link up. Poke an * undocumented register, in an undocumented page, with a magic value * to fix this. @@ -2247,6 +2351,8 @@ static struct phy_driver marvell_drivers[] = { .get_sset_count = marvell_get_sset_count, .get_strings = marvell_get_strings, .get_stats = marvell_get_stats, + .get_tunable = m88e1540_get_tunable, + .set_tunable = m88e1540_set_tunable, }, { .phy_id = MARVELL_PHY_ID_88E1545, @@ -2307,6 +2413,8 @@ static struct phy_driver marvell_drivers[] = { .get_sset_count = marvell_get_sset_count, .get_strings = marvell_get_strings, .get_stats = marvell_get_stats, + .get_tunable = m88e1540_get_tunable, + .set_tunable = m88e1540_set_tunable, }, };