From: Maxim Anisimov Date: Tue, 10 Dec 2024 13:37:02 +0000 (+0300) Subject: mediatek/filogic: add support for Cudy AP3000 v1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6992d6e51af34603de099d7bbe9d7e848f109e22;p=openwrt%2Fstaging%2Fstintel.git mediatek/filogic: add support for Cudy AP3000 v1 Hardware: SoC: MT7981b RAM: 512 MB Flash: 256 MB SPI NAND Ethernet: 1x2.5Gbps (rtl8221b) WiFi: 2x2 MT7981 Button: Reset LED: 1x multicolor Installation ------------ At the moment, firmware installation is only possible via a transition firmware. It's can be requested from the manufacturer by email to support@cudy.com Signed-off-by: Maxim Anisimov Link: https://github.com/openwrt/openwrt/pull/17225 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/mediatek/dts/mt7981b-cudy-ap3000-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-ap3000-v1.dts new file mode 100644 index 0000000000..bd6c15225b --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cudy-ap3000-v1.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; + +#include "mt7981.dtsi" + +/ { + model = "Cudy AP3000 v1"; + compatible = "cudy,ap3000-v1", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + led-boot = &status_led; + led-failsafe = &status_led; + led-running = &status_led; + led-upgrade = &status_led; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led-1 { + color = ; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + status_led: led-2 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&pio 6 GPIO_ACTIVE_HIGH>; + hw_algo = "level"; + hw_margin_ms = <10000>; + always-running; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-handle = <&phy1>; + phy-mode = "2500base-x"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_bdinfo_de00 0>; + }; +}; + +&mdio_bus { + phy1: phy@1 { + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + /* ESMT F50L2G41XA (256M) */ + spi_nand@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + + partition@380000 { + label = "bdinfo"; + reg = <0x380000 0x40000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_bdinfo_de00: macaddr@de00 { + compatible = "mac-base"; + reg = <0xde00 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@3C0000 { + label = "fip"; + reg = <0x3C0000 0x200000>; + read-only; + }; + + partition@5C0000 { + label = "ubi"; + reg = <0x5C0000 0x4000000>; + }; + }; + }; +}; + +&wifi { + nvmem-cell-names = "eeprom"; + nvmem-cells = <&eeprom_factory_0>; + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 12dca51712..d58a450a9d 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -75,6 +75,7 @@ mediatek_setup_interfaces() ucidef_set_interfaces_lan_wan "lan1" eth1 ;; cudy,ap3000outdoor-v1|\ + cudy,ap3000-v1|\ cudy,re3000-v1|\ netgear,wax220|\ ubnt,unifi-6-plus|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 3f5554d269..3188fe71d5 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -73,14 +73,11 @@ case "$board" in addr=$(mtd_get_mac_binary "Factory" 0x8000) [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress ;; - cudy,tr3000-v1|\ - cudy,re3000-v1) - addr=$(mtd_get_mac_binary bdinfo 0xde00) - [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress - [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress - ;; cudy,ap3000outdoor-v1|\ + cudy,ap3000-v1|\ cudy,m3000-v1|\ + cudy,re3000-v1|\ + cudy,tr3000-v1|\ cudy,wr3000s-v1|\ cudy,wr3000-v1) addr=$(mtd_get_mac_binary bdinfo 0xde00) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 91706f8c73..9815c8ce18 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -594,6 +594,23 @@ define Device/cudy_ap3000outdoor-v1 endef TARGET_DEVICES += cudy_ap3000outdoor-v1 +define Device/cudy_ap3000-v1 + DEVICE_VENDOR := Cudy + DEVICE_MODEL := AP3000 + DEVICE_VARIANT := v1 + DEVICE_DTS := mt7981b-cudy-ap3000-v1 + DEVICE_DTS_DIR := ../dts + SUPPORTED_DEVICES += R49 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + KERNEL_IN_UBI := 1 + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware +endef +TARGET_DEVICES += cudy_ap3000-v1 + define Device/cudy_m3000-v1 DEVICE_VENDOR := Cudy DEVICE_MODEL := M3000