From: Vikas Manocha Date: Wed, 6 May 2015 18:46:29 +0000 (-0700) Subject: serial: fdt: add device tree support for pl01x X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=697517293085f7907abd17ac350a530b26cfa85e;p=project%2Fbcm63xx%2Fu-boot.git serial: fdt: add device tree support for pl01x This patch adds device tree support for arm pl010/pl011 driver. Signed-off-by: Vikas Manocha Acked-by: Simon Glass --- diff --git a/doc/device-tree-bindings/serial/pl01x.txt b/doc/device-tree-bindings/serial/pl01x.txt new file mode 100644 index 0000000000..61c27d121b --- /dev/null +++ b/doc/device-tree-bindings/serial/pl01x.txt @@ -0,0 +1,7 @@ +* ARM AMBA Primecell PL011 & PL010 serial UART + +Required properties: +- compatible: must be "arm,primecell", "arm,pl011" or "arm,pl010" +- reg: exactly one register range with length 0x1000 +- clock: input clock frequency for the UART (used to calculate the baud + rate divisor) diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 2124161734..ad503afcad 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -20,6 +20,9 @@ #include #include #include "serial_pl01x_internal.h" +#include + +DECLARE_GLOBAL_DATA_PTR; #ifndef CONFIG_DM_SERIAL @@ -28,7 +31,6 @@ static enum pl01x_type pl01x_type __attribute__ ((section(".data"))); static struct pl01x_regs *base_regs __attribute__ ((section(".data"))); #define NUM_PORTS (sizeof(port)/sizeof(port[0])) -DECLARE_GLOBAL_DATA_PTR; #endif static int pl01x_putc(struct pl01x_regs *regs, char c) @@ -351,9 +353,35 @@ static const struct dm_serial_ops pl01x_serial_ops = { .setbrg = pl01x_serial_setbrg, }; +#ifdef CONFIG_OF_CONTROL +static const struct udevice_id pl01x_serial_id[] ={ + {.compatible = "arm,pl011", .data = TYPE_PL011}, + {.compatible = "arm,pl010", .data = TYPE_PL010}, + {} +}; + +static int pl01x_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct pl01x_serial_platdata *plat = dev_get_platdata(dev); + fdt_addr_t addr; + + addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + plat->base = addr; + plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "clock", 1); + plat->type = dev_get_driver_data(dev); + return 0; +} +#endif + U_BOOT_DRIVER(serial_pl01x) = { .name = "serial_pl01x", .id = UCLASS_SERIAL, + .of_match = of_match_ptr(pl01x_serial_id), + .ofdata_to_platdata = of_match_ptr(pl01x_serial_ofdata_to_platdata), + .platdata_auto_alloc_size = sizeof(struct pl01x_serial_platdata), .probe = pl01x_serial_probe, .ops = &pl01x_serial_ops, .flags = DM_FLAG_PRE_RELOC,