From: Kyungmin Park Date: Wed, 19 Nov 2008 10:47:05 +0000 (+0100) Subject: UBI: Add UBI command support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=694a0b3f1c0accd0de94b89555155d69f8022824;p=project%2Fbcm63xx%2Fu-boot.git UBI: Add UBI command support This patch adds these UBI commands: ubi part [nand|onenand] [part] - Show or set current partition ubi info [l[ayout]] -Display volume and UBI layout information ubi create[vol] volume [size] [type] - Create volume name with size ubi write[vol] address volume size - Write volume from address with size ubi read[vol] address volume [size] - Read volume to address with size ubi remove[vol] volume - Remove volume Signed-off-by: Kyungmin Park Signed-off-by: Stefan Roese --- diff --git a/common/Makefile b/common/Makefile index 6484b239a3..9dec4ec352 100644 --- a/common/Makefile +++ b/common/Makefile @@ -139,6 +139,7 @@ COBJS-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o COBJS-$(CONFIG_CMD_STRINGS) += cmd_strings.o COBJS-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o +COBJS-$(CONFIG_CMD_UBI) += cmd_ubi.o COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o ifdef CONFIG_CMD_USB COBJS-y += cmd_usb.o diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c new file mode 100644 index 0000000000..a5c506480d --- /dev/null +++ b/common/cmd_ubi.c @@ -0,0 +1,628 @@ +/* + * Unsorted Block Image commands + * + * Copyright (C) 2008 Samsung Electronics + * Kyungmin Park + * + * Copyright 2008 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define DEV_TYPE_NONE 0 +#define DEV_TYPE_NAND 1 +#define DEV_TYPE_ONENAND 2 + +/* Private own data */ +static struct ubi_device *ubi; + +struct selected_dev { + char dev_name[32]; /* NAND/OneNAND etc */ + char part_name[80]; + int type; + int nr; + struct mtd_info *mtd_info; +}; + +static struct selected_dev ubi_dev; + +static void ubi_dump_vol_info(const struct ubi_volume *vol) +{ + ubi_msg("volume information dump:"); + ubi_msg("vol_id %d", vol->vol_id); + ubi_msg("reserved_pebs %d", vol->reserved_pebs); + ubi_msg("alignment %d", vol->alignment); + ubi_msg("data_pad %d", vol->data_pad); + ubi_msg("vol_type %d", vol->vol_type); + ubi_msg("name_len %d", vol->name_len); + ubi_msg("usable_leb_size %d", vol->usable_leb_size); + ubi_msg("used_ebs %d", vol->used_ebs); + ubi_msg("used_bytes %lld", vol->used_bytes); + ubi_msg("last_eb_bytes %d", vol->last_eb_bytes); + ubi_msg("corrupted %d", vol->corrupted); + ubi_msg("upd_marker %d", vol->upd_marker); + + if (vol->name_len <= UBI_VOL_NAME_MAX && + strnlen(vol->name, vol->name_len + 1) == vol->name_len) { + ubi_msg("name %s", vol->name); + } else { + ubi_msg("the 1st 5 characters of the name: %c%c%c%c%c", + vol->name[0], vol->name[1], vol->name[2], + vol->name[3], vol->name[4]); + } + printf("\n"); +} + +static void display_volume_info(struct ubi_device *ubi) +{ + int i; + + for (i = 0; i < (ubi->vtbl_slots + 1); i++) { + if (!ubi->volumes[i]) + continue; /* Empty record */ + ubi_dump_vol_info(ubi->volumes[i]); + } +} + +static void display_ubi_info(struct ubi_device *ubi) +{ + ubi_msg("MTD device name: \"%s\"", ubi->mtd->name); + ubi_msg("MTD device size: %llu MiB", ubi->flash_size >> 20); + ubi_msg("physical eraseblock size: %d bytes (%d KiB)", + ubi->peb_size, ubi->peb_size >> 10); + ubi_msg("logical eraseblock size: %d bytes", ubi->leb_size); + ubi_msg("number of good PEBs: %d", ubi->good_peb_count); + ubi_msg("number of bad PEBs: %d", ubi->bad_peb_count); + ubi_msg("smallest flash I/O unit: %d", ubi->min_io_size); + ubi_msg("VID header offset: %d (aligned %d)", + ubi->vid_hdr_offset, ubi->vid_hdr_aloffset); + ubi_msg("data offset: %d", ubi->leb_start); + ubi_msg("max. allowed volumes: %d", ubi->vtbl_slots); + ubi_msg("wear-leveling threshold: %d", CONFIG_MTD_UBI_WL_THRESHOLD); + ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT); + ubi_msg("number of user volumes: %d", + ubi->vol_count - UBI_INT_VOL_COUNT); + ubi_msg("available PEBs: %d", ubi->avail_pebs); + ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs); + ubi_msg("number of PEBs reserved for bad PEB handling: %d", + ubi->beb_rsvd_pebs); + ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec); +} + +static int ubi_info(int layout) +{ + if (layout) + display_volume_info(ubi); + else + display_ubi_info(ubi); + + return 0; +} + +static int parse_num(size_t *num, const char *token) +{ + char *endp; + size_t n; + + n = (size_t) ustrtoul(token, &endp, 0); + if (*endp) + return -EINVAL; + + *num = n; + return 0; +} + +static int verify_mkvol_req(const struct ubi_device *ubi, + const struct ubi_mkvol_req *req) +{ + int n, err = -EINVAL; + + if (req->bytes < 0 || req->alignment < 0 || req->vol_type < 0 || + req->name_len < 0) + goto bad; + + if ((req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots) && + req->vol_id != UBI_VOL_NUM_AUTO) + goto bad; + + if (req->alignment == 0) + goto bad; + + if (req->bytes == 0) + goto bad; + + if (req->vol_type != UBI_DYNAMIC_VOLUME && + req->vol_type != UBI_STATIC_VOLUME) + goto bad; + + if (req->alignment > ubi->leb_size) + goto bad; + + n = req->alignment % ubi->min_io_size; + if (req->alignment != 1 && n) + goto bad; + + if (req->name_len > UBI_VOL_NAME_MAX) { + err = -ENAMETOOLONG; + goto bad; + } + + return 0; +bad: + printf("bad volume creation request"); + return err; +} + +static int ubi_create_vol(char *volume, int size, int dynamic) +{ + struct ubi_mkvol_req req; + int err; + + if (dynamic) + req.vol_type = UBI_DYNAMIC_VOLUME; + else + req.vol_type = UBI_STATIC_VOLUME; + + req.vol_id = UBI_VOL_NUM_AUTO; + req.alignment = 1; + req.bytes = size; + + strcpy(req.name, volume); + req.name_len = strlen(volume); + req.name[req.name_len] = '\0'; + req.padding1 = 0; + /* It's duplicated at drivers/mtd/ubi/cdev.c */ + err = verify_mkvol_req(ubi, &req); + if (err) { + printf("verify_mkvol_req failed %d\n", err); + return err; + } + printf("Creating %s volume %s of size %d\n", + dynamic ? "dynamic" : "static", volume, size); + /* Call real ubi create volume */ + return ubi_create_volume(ubi, &req); +} + +static int ubi_remove_vol(char *volume) +{ + int i, err, reserved_pebs; + int found = 0, vol_id = 0; + struct ubi_volume *vol; + + for (i = 0; i < ubi->vtbl_slots; i++) { + vol = ubi->volumes[i]; + if (vol && !strcmp(vol->name, volume)) { + printf("Volume %s found at valid %d\n", volume, i); + vol_id = i; + found = 1; + break; + } + } + if (!found) { + printf("%s volume not found\n", volume); + return -ENODEV; + } + printf("remove UBI volume %s (id %d)\n", vol->name, vol->vol_id); + + if (ubi->ro_mode) { + printf("It's read-only mode\n"); + err = -EROFS; + goto out_err; + } + + err = ubi_change_vtbl_record(ubi, vol_id, NULL); + if (err) { + printf("Error changing Vol tabel record err=%x\n", err); + goto out_err; + } + reserved_pebs = vol->reserved_pebs; + for (i = 0; i < vol->reserved_pebs; i++) { + err = ubi_eba_unmap_leb(ubi, vol, i); + if (err) + goto out_err; + } + + kfree(vol->eba_tbl); + ubi->volumes[vol_id]->eba_tbl = NULL; + ubi->volumes[vol_id] = NULL; + + ubi->rsvd_pebs -= reserved_pebs; + ubi->avail_pebs += reserved_pebs; + i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs; + if (i > 0) { + i = ubi->avail_pebs >= i ? i : ubi->avail_pebs; + ubi->avail_pebs -= i; + ubi->rsvd_pebs += i; + ubi->beb_rsvd_pebs += i; + if (i > 0) + ubi_msg("reserve more %d PEBs", i); + } + ubi->vol_count -= 1; + + return 0; +out_err: + ubi_err("cannot remove volume %d, error %d", vol_id, err); + return err; +} + +static int ubi_volume_write(char *volume, void *buf, size_t size) +{ + int i = 0, err = -1; + int rsvd_bytes = 0; + int found = 0; + struct ubi_volume *vol; + + for (i = 0; i < ubi->vtbl_slots; i++) { + vol = ubi->volumes[i]; + if (vol && !strcmp(vol->name, volume)) { + printf("Volume \"%s\" found at volume id %d\n", volume, i); + found = 1; + break; + } + } + if (!found) { + printf("%s volume not found\n", volume); + return 1; + } + rsvd_bytes = vol->reserved_pebs * (ubi->leb_size - vol->data_pad); + if (size < 0 || size > rsvd_bytes) { + printf("rsvd_bytes=%d vol->reserved_pebs=%d ubi->leb_size=%d\n", + rsvd_bytes, vol->reserved_pebs, ubi->leb_size); + printf("vol->data_pad=%d\n", vol->data_pad); + printf("Size > volume size !!\n"); + return 1; + } + + err = ubi_start_update(ubi, vol, size); + if (err < 0) { + printf("Cannot start volume update\n"); + return err; + } + + err = ubi_more_update_data(ubi, vol, buf, size); + if (err < 0) { + printf("Couldnt or partially wrote data \n"); + return err; + } + + if (err) { + size = err; + + err = ubi_check_volume(ubi, vol->vol_id); + if ( err < 0 ) + return err; + + if (err) { + ubi_warn("volume %d on UBI device %d is corrupted", + vol->vol_id, ubi->ubi_num); + vol->corrupted = 1; + } + + vol->checked = 1; + ubi_gluebi_updated(vol); + } + + return 0; +} + +static int ubi_volume_read(char *volume, char *buf, size_t size) +{ + int err, lnum, off, len, tbuf_size, i = 0; + size_t count_save = size; + void *tbuf; + unsigned long long tmp; + struct ubi_volume *vol = NULL; + loff_t offp = 0; + + for (i = 0; i < ubi->vtbl_slots; i++) { + vol = ubi->volumes[i]; + if (vol && !strcmp(vol->name, volume)) { + printf("Volume %s found at volume id %d\n", + volume, vol->vol_id); + break; + } + } + if (i == ubi->vtbl_slots) { + printf("%s volume not found\n", volume); + return 0; + } + + printf("read %i bytes from volume %d to %x(buf address)\n", + (int) size, vol->vol_id, (unsigned)buf); + + if (vol->updating) { + printf("updating"); + return -EBUSY; + } + if (vol->upd_marker) { + printf("damaged volume, update marker is set"); + return -EBADF; + } + if (offp == vol->used_bytes) + return 0; + + if (size == 0) { + printf("Read [%lu] bytes\n", (unsigned long) vol->used_bytes); + size = vol->used_bytes; + } + + if (vol->corrupted) + printf("read from corrupted volume %d", vol->vol_id); + if (offp + size > vol->used_bytes) + count_save = size = vol->used_bytes - offp; + + tbuf_size = vol->usable_leb_size; + if (size < tbuf_size) + tbuf_size = ALIGN(size, ubi->min_io_size); + tbuf = malloc(tbuf_size); + if (!tbuf) { + printf("NO MEM\n"); + return -ENOMEM; + } + len = size > tbuf_size ? tbuf_size : size; + + tmp = offp; + off = do_div(tmp, vol->usable_leb_size); + lnum = tmp; + printf("off=%d lnum=%d\n", off, lnum); + do { + if (off + len >= vol->usable_leb_size) + len = vol->usable_leb_size - off; + + err = ubi_eba_read_leb(ubi, vol, lnum, tbuf, off, len, 0); + if (err) { + printf("read err %x\n", err); + break; + } + off += len; + if (off == vol->usable_leb_size) { + lnum += 1; + off -= vol->usable_leb_size; + } + + size -= len; + offp += len; + + printf("buf = %x\n", (unsigned)buf); + memcpy(buf, tbuf, len); + printf("buf[0] = %x\n", buf[0]); + + buf += len; + len = size > tbuf_size ? tbuf_size : size; + } while (size); + + free(tbuf); + return err ? err : count_save - size; +} + +static int ubi_dev_scan(struct mtd_info *info, char *ubidev) +{ + struct mtd_device *dev; + struct part_info *part; + struct mtd_partition mtd_part; + char buffer[32]; + u8 pnum; + int err; + + if (mtdparts_init() != 0) + return 1; + + if (find_dev_and_part(ubidev, &dev, &pnum, &part) != 0) + return 1; + + sprintf(buffer, "mtd=%d", pnum); + memset(&mtd_part, 0, sizeof(mtd_part)); + mtd_part.name = buffer; + mtd_part.size = part->size; + mtd_part.offset = part->offset; + add_mtd_partitions(info, &mtd_part, 1); + + err = ubi_mtd_param_parse(buffer, NULL); + if (err) { + del_mtd_partitions(info); + return err; + } + + err = ubi_init(); + if (err) { + del_mtd_partitions(info); + return err; + } + + return 0; +} + +static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + size_t size = 0; + ulong addr = 0; + int err = 0; + + if (argc < 2) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (strcmp(argv[1], "part") == 0) { + /* Print current partition */ + if (argc == 2) { + if (ubi_dev.type == DEV_TYPE_NONE) { + printf("Error, no UBI device/partition selected!\n"); + return 1; + } + + printf("%s Device %d: %s, partition %s\n", ubi_dev.dev_name, + ubi_dev.nr, ubi_dev.mtd_info->name, ubi_dev.part_name); + return 0; + } + + if (argc < 4) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + /* todo: get dev number for NAND... */ + ubi_dev.nr = 0; + + /* + * Check for nand|onenand selection + */ +#if defined(CONFIG_CMD_NAND) + if (strcmp(argv[2], "nand") == 0) { + strcpy(ubi_dev.dev_name, "NAND"); + ubi_dev.type = DEV_TYPE_NAND; + ubi_dev.mtd_info = &nand_info[ubi_dev.nr]; + } +#endif +#if defined(CONFIG_CMD_ONENAND) + if (strcmp(argv[2], "onenand") == 0) { + strcpy(ubi_dev.dev_name, "OneNAND"); + ubi_dev.type = DEV_TYPE_ONENAND; + ubi_dev.mtd_info = &onenand_mtd; + } +#endif + + if (ubi_dev.type == DEV_TYPE_NONE) { + printf("Error, no UBI device/partition selected!\n"); + return 1; + } + + strcpy(ubi_dev.part_name, argv[3]); + err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name); + if (err) { + printf("UBI init error %d\n", err); + return err; + } + + ubi = ubi_devices[0]; + + return 0; + } + + if ((strcmp(argv[1], "part") != 0) && (ubi_dev.type == DEV_TYPE_NONE)) { + printf("Error, no UBI device/partition selected!\n"); + return 1; + } + + if (strcmp(argv[1], "info") == 0) { + int layout = 0; + if (argc > 2 && !strncmp(argv[2], "l", 1)) + layout = 1; + return ubi_info(layout); + } + + if (strncmp(argv[1], "create", 6) == 0) { + int dynamic = 1; /* default: dynamic volume */ + + /* Use maximum available size */ + size = 0; + + /* E.g., create volume size type */ + if (argc == 5) { + if (strncmp(argv[4], "s", 1) == 0) + dynamic = 0; + else if (strncmp(argv[4], "d", 1) != 0) { + printf("Incorrect type\n"); + return 1; + } + argc--; + } + /* E.g., create volume size */ + if (argc == 4) { + err = parse_num(&size, argv[3]); + if (err) { + printf("Incorrect type\n"); + return err; + } + argc--; + } + /* Use maximum available size */ + if (!size) + size = ubi->avail_pebs * ubi->leb_size; + /* E.g., create volume */ + if (argc == 3) + return ubi_create_vol(argv[2], size, dynamic); + } + + if (strncmp(argv[1], "remove", 6) == 0) { + /* E.g., remove volume */ + if (argc == 3) + return ubi_remove_vol(argv[2]); + } + + if (strncmp(argv[1], "write", 5) == 0) { + if (argc < 5) { + printf("Please see usage\n"); + return 1; + } + + addr = simple_strtoul(argv[2], NULL, 16); + err = parse_num(&size, argv[4]); + if (err) { + printf("Please see usage\n"); + return err; + } + + return ubi_volume_write(argv[3], (void *)addr, size); + } + + if (strncmp(argv[1], "read", 4) == 0) { + size = 0; + + /* E.g., read volume size */ + if (argc == 5) { + err = parse_num(&size, argv[4]); + if (err) { + printf("Please see usage\n"); + return err; + } + argc--; + } + + /* E.g., read volume */ + if (argc == 4) { + addr = simple_strtoul(argv[2], NULL, 16); + argc--; + } + + if (argc == 3) + return ubi_volume_read(argv[3], (char *)addr, size); + } + + printf("Please see usage\n"); + return -1; +} + +U_BOOT_CMD(ubi, 6, 1, do_ubi, + "ubi - ubi commands\n", + "part [nand|onenand] [part]" + " - Show or set current partition\n" + "ubi info [l[ayout]]" + " - Display volume and ubi layout information\n" + "ubi create[vol] volume [size] [type]" + " - create volume name with size\n" + "ubi write[vol] address volume size" + " - Write volume from address with size\n" + "ubi read[vol] address volume [size]" + " - Read volume to address with size\n" + "ubi remove[vol] volume" + " - Remove volume\n" + "[Legends]\n" + " volume: charater name\n" + " size: KiB, MiB, GiB, and bytes\n" + " type: s[tatic] or d[ynamic] (default=dynamic)\n" +);