From: Takashi Iwai <tiwai@suse.de>
Date: Fri, 23 May 2008 14:11:26 +0000 (+0200)
Subject: [ALSA] Fix AC97 kconfig items
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6938d6b2a90d5e2ffaef037852652a1333502519;p=openwrt%2Fstaging%2Fblogic.git

[ALSA] Fix AC97 kconfig items

The kconfig items related with AC97-powersave must be outside the
CONFIG_SND_PCI range.  And it'd be better together with CONFIG_SND_AC97.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---

diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index 79b4d3f25665..255fd18b9aec 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -161,4 +161,25 @@ config SND_ML403_AC97CR
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-ml403_ac97cr.
 
+config SND_AC97_POWER_SAVE
+	bool "AC97 Power-Saving Mode"
+	depends on SND_AC97_CODEC && EXPERIMENTAL
+	default n
+	help
+	  Say Y here to enable the aggressive power-saving support of
+	  AC97 codecs.  In this mode, the power-mode is dynamically
+	  controlled at each open/close.
+
+	  The mode is activated by passing power_save=1 option to
+	  snd-ac97-codec driver.  You can toggle it dynamically over
+	  sysfs, too.
+
+config SND_AC97_POWER_SAVE_DEFAULT
+	int "Default time-out for AC97 power-save mode"
+	depends on SND_AC97_POWER_SAVE
+	default 0
+	help
+	  The default time-out value in seconds for AC97 automatic
+	  power-save mode.  0 means to disable the power-save mode.
+
 endif	# SND_DRIVERS
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index b148c0b3ef3f..8fe5dac39428 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -901,25 +901,4 @@ config SND_YMFPCI_FIRMWARE_IN_KERNEL
 	  for the YMFPCI driver.  If you choose N here, you need to
 	  install the firmware files from the alsa-firmware package.
 
-config SND_AC97_POWER_SAVE
-	bool "AC97 Power-Saving Mode"
-	depends on SND_AC97_CODEC && EXPERIMENTAL
-	default n
-	help
-	  Say Y here to enable the aggressive power-saving support of
-	  AC97 codecs.  In this mode, the power-mode is dynamically
-	  controlled at each open/close.
-
-	  The mode is activated by passing power_save=1 option to
-	  snd-ac97-codec driver.  You can toggle it dynamically over
-	  sysfs, too.
-
-config SND_AC97_POWER_SAVE_DEFAULT
-	int "Default time-out for AC97 power-save mode"
-	depends on SND_AC97_POWER_SAVE
-	default 0
-	help
-	  The default time-out value in seconds for AC97 automatic
-	  power-save mode.  0 means to disable the power-save mode.
-
 endif	# SND_PCI