From: Malli Chilakala <mallikarjuna.chilakala@intel.com>
Date: Sat, 18 Jun 2005 00:44:20 +0000 (-0700)
Subject: [PATCH] e1000: Ethtool set speed/duplex validates parameters for consistency
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6921368f64c59b2a1d4659a958c69458c94d8b75;p=openwrt%2Fstaging%2Fblogic.git

[PATCH] e1000: Ethtool set speed/duplex validates parameters for consistency

Ethtool set speed/duplex validates parameters for consistency

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
---

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index d59f75b7bf16..f680c87254ba 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3617,6 +3617,13 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
 {
 	adapter->hw.autoneg = 0;
 
+	/* Fiber NICs only allow 1000 gbps Full duplex */
+	if((adapter->hw.media_type == e1000_media_type_fiber) &&
+		spddplx != (SPEED_1000 + DUPLEX_FULL)) {
+		DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+		return -EINVAL;
+	}
+
 	switch(spddplx) {
 	case SPEED_10 + DUPLEX_HALF:
 		adapter->hw.forced_speed_duplex = e1000_10_half;