From: Joe Perches Date: Mon, 15 Feb 2010 08:34:20 +0000 (+0000) Subject: drivers/net/ixgb: Use netif_printk macros X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6909c66dfbbab99dbbd9931627c9f6e8c45bfbdb;p=openwrt%2Fstaging%2Fblogic.git drivers/net/ixgb: Use netif_printk macros Convert private DPRINTK macro uses to netif_ equivalents Remove #define DPRINTK Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index 5257ae08b9f9..92d2e71d0c8b 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -75,19 +75,14 @@ struct ixgb_adapter; #include "ixgb_ee.h" #include "ixgb_ids.h" +#define PFX "ixgb: " + #ifdef _DEBUG_DRIVER_ -#define IXGB_DBG(args...) printk(KERN_DEBUG "ixgb: " args) +#define IXGB_DBG(args...) printk(KERN_DEBUG PFX args) #else #define IXGB_DBG(args...) #endif -#define PFX "ixgb: " -#define DPRINTK(nlevel, klevel, fmt, args...) \ - (void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \ - printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \ - __func__ , ## args)) - - /* TX/RX descriptor defines */ #define DEFAULT_TXD 256 #define MAX_TXD 4096 diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 6a7b2ccef72c..93d018505ebb 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -238,8 +238,8 @@ ixgb_up(struct ixgb_adapter *adapter) if (err) { if (adapter->have_msi) pci_disable_msi(adapter->pdev); - DPRINTK(PROBE, ERR, - "Unable to allocate interrupt Error: %d\n", err); + netif_err(adapter, probe, adapter->netdev, + "Unable to allocate interrupt Error: %d\n", err); return err; } @@ -310,7 +310,7 @@ ixgb_reset(struct ixgb_adapter *adapter) ixgb_adapter_stop(hw); if (!ixgb_init_hw(hw)) - DPRINTK(PROBE, ERR, "ixgb_init_hw failed.\n"); + netif_err(adapter, probe, adapter->netdev, "ixgb_init_hw failed\n"); /* restore frame size information */ IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT); @@ -447,7 +447,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* make sure the EEPROM is good */ if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { - DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n"); + netif_err(adapter, probe, adapter->netdev, + "The EEPROM Checksum Is Not Valid\n"); err = -EIO; goto err_eeprom; } @@ -456,7 +457,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->perm_addr)) { - DPRINTK(PROBE, ERR, "Invalid MAC Address\n"); + netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n"); err = -EIO; goto err_eeprom; } @@ -477,7 +478,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); - DPRINTK(PROBE, INFO, "Intel(R) PRO/10GbE Network Connection\n"); + netif_info(adapter, probe, adapter->netdev, + "Intel(R) PRO/10GbE Network Connection\n"); ixgb_check_options(adapter); /* reset the hardware with the new settings */ @@ -552,14 +554,14 @@ ixgb_sw_init(struct ixgb_adapter *adapter) hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; adapter->rx_buffer_len = hw->max_frame_size + 8; /* + 8 for errata */ - if ((hw->device_id == IXGB_DEVICE_ID_82597EX) - || (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) - || (hw->device_id == IXGB_DEVICE_ID_82597EX_LR) - || (hw->device_id == IXGB_DEVICE_ID_82597EX_SR)) + if ((hw->device_id == IXGB_DEVICE_ID_82597EX) || + (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) || + (hw->device_id == IXGB_DEVICE_ID_82597EX_LR) || + (hw->device_id == IXGB_DEVICE_ID_82597EX_SR)) hw->mac_type = ixgb_82597; else { /* should never have loaded on this device */ - DPRINTK(PROBE, ERR, "unsupported device id\n"); + netif_err(adapter, probe, adapter->netdev, "unsupported device id\n"); } /* enable flow control to be programmed */ @@ -661,8 +663,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter) size = sizeof(struct ixgb_buffer) * txdr->count; txdr->buffer_info = vmalloc(size); if (!txdr->buffer_info) { - DPRINTK(PROBE, ERR, - "Unable to allocate transmit descriptor ring memory\n"); + netif_err(adapter, probe, adapter->netdev, + "Unable to allocate transmit descriptor ring memory\n"); return -ENOMEM; } memset(txdr->buffer_info, 0, size); @@ -675,8 +677,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter) txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); if (!txdr->desc) { vfree(txdr->buffer_info); - DPRINTK(PROBE, ERR, - "Unable to allocate transmit descriptor memory\n"); + netif_err(adapter, probe, adapter->netdev, + "Unable to allocate transmit descriptor memory\n"); return -ENOMEM; } memset(txdr->desc, 0, txdr->size); @@ -750,8 +752,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter) size = sizeof(struct ixgb_buffer) * rxdr->count; rxdr->buffer_info = vmalloc(size); if (!rxdr->buffer_info) { - DPRINTK(PROBE, ERR, - "Unable to allocate receive descriptor ring\n"); + netif_err(adapter, probe, adapter->netdev, + "Unable to allocate receive descriptor ring\n"); return -ENOMEM; } memset(rxdr->buffer_info, 0, size); @@ -765,8 +767,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter) if (!rxdr->desc) { vfree(rxdr->buffer_info); - DPRINTK(PROBE, ERR, - "Unable to allocate receive descriptors\n"); + netif_err(adapter, probe, adapter->netdev, + "Unable to allocate receive descriptors\n"); return -ENOMEM; } memset(rxdr->desc, 0, rxdr->size); @@ -1580,7 +1582,8 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu) /* MTU < 68 is an error for IPv4 traffic, just don't allow it */ if ((new_mtu < 68) || (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) { - DPRINTK(PROBE, ERR, "Invalid MTU setting %d\n", new_mtu); + netif_err(adapter, probe, adapter->netdev, + "Invalid MTU setting %d\n", new_mtu); return -EINVAL; } @@ -1854,24 +1857,25 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter) && !(IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_TXOFF)) { /* detected Tx unit hang */ - DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n" - " TDH <%x>\n" - " TDT <%x>\n" - " next_to_use <%x>\n" - " next_to_clean <%x>\n" - "buffer_info[next_to_clean]\n" - " time_stamp <%lx>\n" - " next_to_watch <%x>\n" - " jiffies <%lx>\n" - " next_to_watch.status <%x>\n", - IXGB_READ_REG(&adapter->hw, TDH), - IXGB_READ_REG(&adapter->hw, TDT), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_ring->buffer_info[eop].time_stamp, - eop, - jiffies, - eop_desc->status); + netif_err(adapter, drv, adapter->netdev, + "Detected Tx Unit Hang\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + IXGB_READ_REG(&adapter->hw, TDH), + IXGB_READ_REG(&adapter->hw, TDT), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_ring->buffer_info[eop].time_stamp, + eop, + jiffies, + eop_desc->status); netif_stop_queue(netdev); } } @@ -2269,7 +2273,8 @@ static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev) struct ixgb_adapter *adapter = netdev_priv(netdev); if (pci_enable_device(pdev)) { - DPRINTK(PROBE, ERR, "Cannot re-enable PCI device after reset.\n"); + netif_err(adapter, probe, adapter->netdev, + "Cannot re-enable PCI device after reset\n"); return PCI_ERS_RESULT_DISCONNECT; } @@ -2285,14 +2290,16 @@ static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev) /* Make sure the EEPROM is good */ if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { - DPRINTK(PROBE, ERR, "After reset, the EEPROM checksum is not valid.\n"); + netif_err(adapter, probe, adapter->netdev, + "After reset, the EEPROM checksum is not valid\n"); return PCI_ERS_RESULT_DISCONNECT; } ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr); memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->perm_addr)) { - DPRINTK(PROBE, ERR, "After reset, invalid MAC address.\n"); + netif_err(adapter, probe, adapter->netdev, + "After reset, invalid MAC address\n"); return PCI_ERS_RESULT_DISCONNECT; }