From: Luis R. Rodriguez Date: Wed, 8 May 2013 00:01:09 +0000 (-0700) Subject: backports: add pm patch for rtl8188ee X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=68ee70bbfaf818704e79790912d2f062a83b0651;p=openwrt%2Fstaging%2Fblogic.git backports: add pm patch for rtl8188ee Some day we will use SmPL for this... == ckmake-report.log == 1 2.6.24 [ OK ] 2 2.6.25 [ OK ] 3 2.6.26 [ OK ] 4 2.6.27 [ OK ] 5 2.6.28 [ OK ] 6 2.6.29 [ OK ] 7 2.6.30 [ OK ] 8 2.6.31 [ OK ] 9 2.6.32 [ OK ] 10 2.6.33 [ OK ] 11 2.6.34 [ OK ] 12 2.6.35 [ OK ] 13 2.6.36 [ OK ] 14 2.6.37 [ OK ] 15 2.6.38 [ FAIL ] 16 2.6.39 [ OK ] 17 3.0.76 [ OK ] 18 3.1.10 [ OK ] 19 3.2.44 [ OK ] 20 3.3.8 [ OK ] 21 3.4.43 [ OK ] 22 3.5.7 [ OK ] 23 3.6.11 [ OK ] 24 3.7.10 [ OK ] 25 3.8.11 [ OK ] 26 3.9.0 [ OK ] real 30m33.959s user 809m11.262s sys 126m15.477s Signed-off-by: Luis R. Rodriguez [Luis says the "FAIL" was due to a test setup issue only] Signed-off-by: Johannes Berg --- diff --git a/patches/collateral-evolutions/network/11-dev-pm-ops/drivers_net_wireless_rtlwifi_rtl8188ee_sw.patch b/patches/collateral-evolutions/network/11-dev-pm-ops/drivers_net_wireless_rtlwifi_rtl8188ee_sw.patch new file mode 100644 index 000000000000..c377e12fcd0c --- /dev/null +++ b/patches/collateral-evolutions/network/11-dev-pm-ops/drivers_net_wireless_rtlwifi_rtl8188ee_sw.patch @@ -0,0 +1,25 @@ +--- a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c ++++ b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c +@@ -387,6 +387,9 @@ MODULE_PARM_DESC(swlps, "Set to 1 to use + MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n"); + MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)"); + ++compat_pci_suspend(rtl_pci_suspend); ++compat_pci_resume(rtl_pci_resume); ++ + static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume); + + static struct pci_driver rtl88ee_driver = { +@@ -394,7 +397,12 @@ static struct pci_driver rtl88ee_driver + .id_table = rtl88ee_pci_ids, + .probe = rtl_pci_probe, + .remove = rtl_pci_disconnect, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) + .driver.pm = &rtlwifi_pm_ops, ++#elif defined(CONFIG_PM_SLEEP) ++ .suspend = rtl_pci_suspend, ++ .resume = rtl_pci_resume, ++#endif + }; + + module_pci_driver(rtl88ee_driver);