From: Luka Perkov Date: Sun, 8 Feb 2015 15:09:45 +0000 (+0000) Subject: lantiq: fix patches after 3.14.32 bump X-Git-Tag: reboot~4383 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=683da1384bc567d1a29544ca98f56dea4542cb3c;p=openwrt%2Fstaging%2Fchunkeey.git lantiq: fix patches after 3.14.32 bump Signed-off-by: Luka Perkov SVN-Revision: 44320 --- diff --git a/target/linux/lantiq/patches-3.14/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-3.14/0001-MIPS-lantiq-add-pcie-driver.patch index 35bc54879e..f73fab6672 100644 --- a/target/linux/lantiq/patches-3.14/0001-MIPS-lantiq-add-pcie-driver.patch +++ b/target/linux/lantiq/patches-3.14/0001-MIPS-lantiq-add-pcie-driver.patch @@ -5516,7 +5516,7 @@ Signed-off-by: John Crispin (AER) driver support. Error reporting messages sent to Root --- a/include/linux/pci.h +++ b/include/linux/pci.h -@@ -1121,6 +1121,8 @@ void pci_walk_bus(struct pci_bus *top, i +@@ -1123,6 +1123,8 @@ void pci_walk_bus(struct pci_bus *top, i void *userdata); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); diff --git a/target/linux/lantiq/patches-3.14/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch b/target/linux/lantiq/patches-3.14/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch index 55d8824999..7a0e1c3e91 100644 --- a/target/linux/lantiq/patches-3.14/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch +++ b/target/linux/lantiq/patches-3.14/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch @@ -14,7 +14,7 @@ Signed-off-by: Álvaro Fernández Rojas --- a/arch/mips/lantiq/xway/xrx200_phy_fw.c +++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c -@@ -24,7 +24,23 @@ static dma_addr_t xway_gphy_load(struct +@@ -24,7 +24,23 @@ static dma_addr_t xway_gphy_load(struct void *fw_addr; size_t size; diff --git a/target/linux/lantiq/patches-3.14/0012-pinctrl-lantiq-fix-up-pinmux.patch b/target/linux/lantiq/patches-3.14/0012-pinctrl-lantiq-fix-up-pinmux.patch index 6a5a260742..ecd143f91f 100644 --- a/target/linux/lantiq/patches-3.14/0012-pinctrl-lantiq-fix-up-pinmux.patch +++ b/target/linux/lantiq/patches-3.14/0012-pinctrl-lantiq-fix-up-pinmux.patch @@ -24,7 +24,7 @@ Signed-off-by: John Crispin int port = PORT(pin); u32 alt1_reg = GPIO_ALT1(pin); -@@ -632,6 +631,14 @@ static inline int xway_mux_apply(struct +@@ -632,6 +631,14 @@ static inline int xway_mux_apply(struct return 0; } diff --git a/target/linux/lantiq/patches-3.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-3.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch index 8ebdc99878..4c010f8282 100644 --- a/target/linux/lantiq/patches-3.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch +++ b/target/linux/lantiq/patches-3.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch @@ -14,7 +14,7 @@ Signed-off-by: John Crispin --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c -@@ -1105,6 +1105,10 @@ static int m25p_probe(struct spi_device +@@ -1105,6 +1105,10 @@ static int m25p_probe(struct spi_device struct mtd_part_parser_data ppdata; struct device_node *np = spi->dev.of_node; int ret; @@ -25,7 +25,7 @@ Signed-off-by: John Crispin /* Platform data helps sort out which chip type we have, as * well as how this board partitions it. If we don't have -@@ -1177,6 +1181,8 @@ static int m25p_probe(struct spi_device +@@ -1177,6 +1181,8 @@ static int m25p_probe(struct spi_device if (data && data->name) flash->mtd.name = data->name; diff --git a/target/linux/lantiq/patches-3.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-3.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch index 3f53bf808f..a60166e38e 100644 --- a/target/linux/lantiq/patches-3.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch +++ b/target/linux/lantiq/patches-3.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch @@ -13,9 +13,9 @@ Signed-off-by: John Crispin --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -157,6 +157,11 @@ config MICREL_PHY - ---help--- - Currently has a driver for the KSZ8041 +@@ -152,6 +152,11 @@ config RTL8306_PHY + tristate "Driver for Realtek RTL8306S switches" + select SWCONFIG +config LANTIQ_PHY + tristate "Driver for Lantiq PHYs" @@ -27,7 +27,7 @@ Signed-off-by: John Crispin depends on PHYLIB=y --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -40,6 +40,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o +@@ -39,6 +39,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_DP83640_PHY) += dp83640.o obj-$(CONFIG_STE10XP) += ste10Xp.o obj-$(CONFIG_MICREL_PHY) += micrel.o diff --git a/target/linux/lantiq/patches-3.14/0026-NET-multi-phy-support.patch b/target/linux/lantiq/patches-3.14/0026-NET-multi-phy-support.patch index 3bd2419daf..1601015a45 100644 --- a/target/linux/lantiq/patches-3.14/0026-NET-multi-phy-support.patch +++ b/target/linux/lantiq/patches-3.14/0026-NET-multi-phy-support.patch @@ -21,7 +21,7 @@ Signed-off-by: John Crispin phydev->adjust_link(phydev->attached_dev); break; } -@@ -830,7 +831,8 @@ void phy_state_machine(struct work_struc +@@ -841,7 +842,8 @@ void phy_state_machine(struct work_struc netif_carrier_on(phydev->attached_dev); } else { phydev->state = PHY_NOLINK; @@ -31,7 +31,7 @@ Signed-off-by: John Crispin } phydev->adjust_link(phydev->attached_dev); -@@ -842,7 +844,8 @@ void phy_state_machine(struct work_struc +@@ -853,7 +855,8 @@ void phy_state_machine(struct work_struc case PHY_HALTED: if (phydev->link) { phydev->link = 0; @@ -39,7 +39,7 @@ Signed-off-by: John Crispin + if (!phydev->no_auto_carrier_off) + netif_carrier_off(phydev->attached_dev); phydev->adjust_link(phydev->attached_dev); - do_suspend = 1; + do_suspend = true; } --- a/include/linux/phy.h +++ b/include/linux/phy.h diff --git a/target/linux/lantiq/patches-3.14/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-3.14/0028-NET-lantiq-various-etop-fixes.patch index 7f737fab1a..6e3a03a498 100644 --- a/target/linux/lantiq/patches-3.14/0028-NET-lantiq-various-etop-fixes.patch +++ b/target/linux/lantiq/patches-3.14/0028-NET-lantiq-various-etop-fixes.patch @@ -265,7 +265,7 @@ Signed-off-by: John Crispin return IRQ_HANDLED; } -@@ -224,7 +301,7 @@ ltq_etop_free_channel(struct net_device +@@ -224,7 +301,7 @@ ltq_etop_free_channel(struct net_device ltq_dma_free(&ch->dma); if (ch->dma.irq) free_irq(ch->dma.irq, priv); @@ -442,7 +442,7 @@ Signed-off-by: John Crispin } static void -@@ -309,7 +454,10 @@ ltq_etop_get_settings(struct net_device +@@ -309,7 +454,10 @@ ltq_etop_get_settings(struct net_device { struct ltq_etop_priv *priv = netdev_priv(dev); @@ -454,7 +454,7 @@ Signed-off-by: John Crispin } static int -@@ -317,7 +465,10 @@ ltq_etop_set_settings(struct net_device +@@ -317,7 +465,10 @@ ltq_etop_set_settings(struct net_device { struct ltq_etop_priv *priv = netdev_priv(dev); @@ -675,7 +675,7 @@ Signed-off-by: John Crispin return 0; } -@@ -520,16 +716,16 @@ ltq_etop_tx(struct sk_buff *skb, struct +@@ -520,16 +716,16 @@ ltq_etop_tx(struct sk_buff *skb, struct int queue = skb_get_queue_mapping(skb); struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); struct ltq_etop_priv *priv = netdev_priv(dev); @@ -697,7 +697,7 @@ Signed-off-by: John Crispin netdev_err(dev, "tx ring full\n"); netif_tx_stop_queue(txq); return NETDEV_TX_BUSY; -@@ -537,7 +733,7 @@ ltq_etop_tx(struct sk_buff *skb, struct +@@ -537,7 +733,7 @@ ltq_etop_tx(struct sk_buff *skb, struct /* dma needs to start on a 16 byte aligned address */ byte_offset = CPHYSADDR(skb->data) % 16; @@ -706,7 +706,7 @@ Signed-off-by: John Crispin dev->trans_start = jiffies; -@@ -547,11 +743,11 @@ ltq_etop_tx(struct sk_buff *skb, struct +@@ -547,11 +743,11 @@ ltq_etop_tx(struct sk_buff *skb, struct wmb(); desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); diff --git a/target/linux/lantiq/patches-3.14/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-3.14/0030-GPIO-add-named-gpio-exports.patch index da71d0b539..21db7d8a82 100644 --- a/target/linux/lantiq/patches-3.14/0030-GPIO-add-named-gpio-exports.patch +++ b/target/linux/lantiq/patches-3.14/0030-GPIO-add-named-gpio-exports.patch @@ -22,7 +22,7 @@ Signed-off-by: John Crispin struct gpio_desc; -@@ -296,3 +298,69 @@ void of_gpiochip_remove(struct gpio_chip +@@ -302,3 +304,69 @@ void of_gpiochip_remove(struct gpio_chip if (chip->of_node) of_node_put(chip->of_node); } @@ -94,7 +94,7 @@ Signed-off-by: John Crispin +device_initcall(of_gpio_export_init); --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c -@@ -803,7 +803,7 @@ static struct class gpio_class = { +@@ -798,7 +798,7 @@ static struct class gpio_class = { * * Returns zero on success, else an error. */ @@ -103,17 +103,17 @@ Signed-off-by: John Crispin { unsigned long flags; int status; -@@ -843,7 +843,8 @@ int gpiod_export(struct gpio_desc *desc, - offset = gpio_chip_hwgpio(desc); +@@ -839,6 +839,9 @@ int gpiod_export(struct gpio_desc *desc, if (desc->chip->names && desc->chip->names[offset]) ioname = desc->chip->names[offset]; -- + + if (name) + ioname = name; - dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0), - desc, ioname ? ioname : "gpio%u", - desc_to_gpio(desc)); -@@ -880,6 +881,12 @@ fail_unlock: ++ + dev = device_create_with_groups(&gpio_class, desc->chip->dev, + MKDEV(0, 0), desc, gpio_groups, + ioname ? ioname : "gpio%u", +@@ -874,6 +877,12 @@ fail_unlock: gpiod_dbg(desc, "%s: status %d\n", __func__, status); return status; } diff --git a/target/linux/lantiq/patches-3.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-3.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch index f2c0395a0e..834f3ff04c 100644 --- a/target/linux/lantiq/patches-3.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch +++ b/target/linux/lantiq/patches-3.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch @@ -19,10 +19,8 @@ Signed-off-by: John Crispin create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c create mode 100644 arch/mips/lantiq/xway/rt_eep.c -Index: linux-3.14.28/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-3.14.28/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h 2015-01-17 10:55:03.329443942 -0800 +--- /dev/null ++++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h @@ -0,0 +1,6 @@ +#ifndef _PCI_ATH_FIXUP +#define _PCI_ATH_FIXUP @@ -30,11 +28,9 @@ Index: linux-3.14.28/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h +void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init; + +#endif /* _PCI_ATH_FIXUP */ -Index: linux-3.14.28/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h -=================================================================== ---- linux-3.14.28.orig/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h 2015-01-17 10:55:03.337443971 -0800 -+++ linux-3.14.28/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h 2015-01-17 10:55:03.329443942 -0800 -@@ -90,5 +90,8 @@ +--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h ++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev, extern void ltq_pmu_enable(unsigned int module); extern void ltq_pmu_disable(unsigned int module); @@ -43,11 +39,9 @@ Index: linux-3.14.28/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h + #endif /* CONFIG_SOC_TYPE_XWAY */ #endif /* _LTQ_XWAY_H__ */ -Index: linux-3.14.28/arch/mips/lantiq/xway/Makefile -=================================================================== ---- linux-3.14.28.orig/arch/mips/lantiq/xway/Makefile 2015-01-17 10:55:03.337443971 -0800 -+++ linux-3.14.28/arch/mips/lantiq/xway/Makefile 2015-01-17 11:58:16.000000000 -0800 -@@ -2,4 +2,7 @@ +--- a/arch/mips/lantiq/xway/Makefile ++++ b/arch/mips/lantiq/xway/Makefile +@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o obj-y += vmmc.o tffs.o @@ -55,10 +49,8 @@ Index: linux-3.14.28/arch/mips/lantiq/xway/Makefile +obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o + obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o -Index: linux-3.14.28/arch/mips/lantiq/xway/ath_eep.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-3.14.28/arch/mips/lantiq/xway/ath_eep.c 2015-01-17 10:55:03.329443942 -0800 +--- /dev/null ++++ b/arch/mips/lantiq/xway/ath_eep.c @@ -0,0 +1,282 @@ +/* + * Copyright (C) 2011 Luca Olivetti @@ -342,10 +334,8 @@ Index: linux-3.14.28/arch/mips/lantiq/xway/ath_eep.c + return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe); +} +device_initcall(of_ath5k_eeprom_init); -Index: linux-3.14.28/arch/mips/lantiq/xway/eth_mac.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-3.14.28/arch/mips/lantiq/xway/eth_mac.c 2015-01-17 11:14:42.823292726 -0800 +--- /dev/null ++++ b/arch/mips/lantiq/xway/eth_mac.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2012 John Crispin @@ -423,10 +413,8 @@ Index: linux-3.14.28/arch/mips/lantiq/xway/eth_mac.c + return platform_driver_probe(ð_mac_driver, of_eth_mac_probe); +} +device_initcall(of_eth_mac_init); -Index: linux-3.14.28/arch/mips/lantiq/xway/pci-ath-fixup.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-3.14.28/arch/mips/lantiq/xway/pci-ath-fixup.c 2015-01-17 10:55:03.329443942 -0800 +--- /dev/null ++++ b/arch/mips/lantiq/xway/pci-ath-fixup.c @@ -0,0 +1,109 @@ +/* + * Atheros AP94 reference board PCI initialization @@ -537,10 +525,8 @@ Index: linux-3.14.28/arch/mips/lantiq/xway/pci-ath-fixup.c + ath_fixups[ath_num_fixups].cal_data = cal_data; + ath_num_fixups++; +} -Index: linux-3.14.28/arch/mips/lantiq/xway/rt_eep.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-3.14.28/arch/mips/lantiq/xway/rt_eep.c 2015-01-17 10:55:03.329443942 -0800 +--- /dev/null ++++ b/arch/mips/lantiq/xway/rt_eep.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2011 John Crispin @@ -602,11 +588,9 @@ Index: linux-3.14.28/arch/mips/lantiq/xway/rt_eep.c + return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe); +} +device_initcall(of_ralink_eeprom_init); -Index: linux-3.14.28/drivers/net/ethernet/lantiq_etop.c -=================================================================== ---- linux-3.14.28.orig/drivers/net/ethernet/lantiq_etop.c 2015-01-17 11:52:03.818405214 -0800 -+++ linux-3.14.28/drivers/net/ethernet/lantiq_etop.c 2015-01-17 12:02:20.905465188 -0800 -@@ -843,6 +843,9 @@ +--- a/drivers/net/ethernet/lantiq_etop.c ++++ b/drivers/net/ethernet/lantiq_etop.c +@@ -843,6 +843,9 @@ ltq_etop_init(struct net_device *dev) if (priv->mac) memcpy(&mac.sa_data, priv->mac, ETH_ALEN); diff --git a/target/linux/lantiq/patches-3.14/0038-MIPS-lantiq-fpi-on-ar9.patch b/target/linux/lantiq/patches-3.14/0038-MIPS-lantiq-fpi-on-ar9.patch index cfa3a1f79a..5fbe0a1137 100644 --- a/target/linux/lantiq/patches-3.14/0038-MIPS-lantiq-fpi-on-ar9.patch +++ b/target/linux/lantiq/patches-3.14/0038-MIPS-lantiq-fpi-on-ar9.patch @@ -5,9 +5,9 @@ Signed-off-by: Ben Mulvihill arch/mips/lantiq/xway/clk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) ---- a/arch/mips/lantiq/xway/clk.c 2015-01-21 10:15:44.000000000 +0100 -+++ b/arch/mips/lantiq/xway/clk.c 2015-01-21 10:17:29.000000000 +0100 -@@ -104,8 +104,9 @@ unsigned long ltq_ar9_fpi_hz(void) +--- a/arch/mips/lantiq/xway/clk.c ++++ b/arch/mips/lantiq/xway/clk.c +@@ -87,8 +87,9 @@ unsigned long ltq_ar9_fpi_hz(void) unsigned long sys = ltq_ar9_sys_hz(); if (ltq_cgu_r32(CGU_SYS) & BIT(0))