From: Ilya Lipnitskiy Date: Tue, 16 Mar 2021 05:29:55 +0000 (-0700) Subject: kernel: backports: mt7530: fix TRGMII mode after reset X-Git-Tag: mikrotik~2596 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=680f91d0e5444d58815af03bf41c12592438f9d8;p=openwrt%2Fstaging%2Fchunkeey.git kernel: backports: mt7530: fix TRGMII mode after reset Backport upstream patch that fixes TRGMII mode now that mt7530 is actually resetting the switch on ramips devices. Patches apply to both Linux 5.4 and 5.10, since TRGMII is broken on both. Fixes: 69551a244292 ("ramips: manage low reset lines") Signed-off-by: Ilya Lipnitskiy --- diff --git a/target/linux/generic/backport-5.10/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch b/target/linux/generic/backport-5.10/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch new file mode 100644 index 0000000000..951ae9c664 --- /dev/null +++ b/target/linux/generic/backport-5.10/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch @@ -0,0 +1,84 @@ +From c3b8e07909dbe67b0d580416c1a5257643a73be7 Mon Sep 17 00:00:00 2001 +From: Ilya Lipnitskiy +Date: Fri, 12 Mar 2021 00:07:03 -0800 +Subject: [PATCH] net: dsa: mt7530: setup core clock even in TRGMII mode + +A recent change to MIPS ralink reset logic made it so mt7530 actually +resets the switch on platforms such as mt7621 (where bit 2 is the reset +line for the switch). That exposed an issue where the switch would not +function properly in TRGMII mode after a reset. + +Reconfigure core clock in TRGMII mode to fix the issue. + +Tested on Ubiquiti ER-X (MT7621) with TRGMII mode enabled. + +Fixes: 3f9ef7785a9c ("MIPS: ralink: manage low reset lines") +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 52 +++++++++++++++++++--------------------- + 1 file changed, 25 insertions(+), 27 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -435,34 +435,32 @@ mt7530_pad_clk_setup(struct dsa_switch * + TD_DM_DRVP(8) | TD_DM_DRVN(8)); + + /* Setup core clock for MT7530 */ +- if (!trgint) { +- /* Disable MT7530 core clock */ +- core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); +- +- /* Disable PLL, since phy_device has not yet been created +- * provided for phy_[read,write]_mmd_indirect is called, we +- * provide our own core_write_mmd_indirect to complete this +- * function. +- */ +- core_write_mmd_indirect(priv, +- CORE_GSWPLL_GRP1, +- MDIO_MMD_VEND2, +- 0); +- +- /* Set core clock into 500Mhz */ +- core_write(priv, CORE_GSWPLL_GRP2, +- RG_GSWPLL_POSDIV_500M(1) | +- RG_GSWPLL_FBKDIV_500M(25)); +- +- /* Enable PLL */ +- core_write(priv, CORE_GSWPLL_GRP1, +- RG_GSWPLL_EN_PRE | +- RG_GSWPLL_POSDIV_200M(2) | +- RG_GSWPLL_FBKDIV_200M(32)); +- +- /* Enable MT7530 core clock */ +- core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); +- } ++ /* Disable MT7530 core clock */ ++ core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); ++ ++ /* Disable PLL, since phy_device has not yet been created ++ * provided for phy_[read,write]_mmd_indirect is called, we ++ * provide our own core_write_mmd_indirect to complete this ++ * function. ++ */ ++ core_write_mmd_indirect(priv, ++ CORE_GSWPLL_GRP1, ++ MDIO_MMD_VEND2, ++ 0); ++ ++ /* Set core clock into 500Mhz */ ++ core_write(priv, CORE_GSWPLL_GRP2, ++ RG_GSWPLL_POSDIV_500M(1) | ++ RG_GSWPLL_FBKDIV_500M(25)); ++ ++ /* Enable PLL */ ++ core_write(priv, CORE_GSWPLL_GRP1, ++ RG_GSWPLL_EN_PRE | ++ RG_GSWPLL_POSDIV_200M(2) | ++ RG_GSWPLL_FBKDIV_200M(32)); ++ ++ /* Enable MT7530 core clock */ ++ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); + + /* Setup the MT7530 TRGMII Tx Clock */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); diff --git a/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch b/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch new file mode 100644 index 0000000000..d48d797294 --- /dev/null +++ b/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch @@ -0,0 +1,84 @@ +From c3b8e07909dbe67b0d580416c1a5257643a73be7 Mon Sep 17 00:00:00 2001 +From: Ilya Lipnitskiy +Date: Fri, 12 Mar 2021 00:07:03 -0800 +Subject: [PATCH] net: dsa: mt7530: setup core clock even in TRGMII mode + +A recent change to MIPS ralink reset logic made it so mt7530 actually +resets the switch on platforms such as mt7621 (where bit 2 is the reset +line for the switch). That exposed an issue where the switch would not +function properly in TRGMII mode after a reset. + +Reconfigure core clock in TRGMII mode to fix the issue. + +Tested on Ubiquiti ER-X (MT7621) with TRGMII mode enabled. + +Fixes: 3f9ef7785a9c ("MIPS: ralink: manage low reset lines") +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 52 +++++++++++++++++++--------------------- + 1 file changed, 25 insertions(+), 27 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -427,34 +427,32 @@ mt7530_pad_clk_setup(struct dsa_switch * + TD_DM_DRVP(8) | TD_DM_DRVN(8)); + + /* Setup core clock for MT7530 */ +- if (!trgint) { +- /* Disable MT7530 core clock */ +- core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); +- +- /* Disable PLL, since phy_device has not yet been created +- * provided for phy_[read,write]_mmd_indirect is called, we +- * provide our own core_write_mmd_indirect to complete this +- * function. +- */ +- core_write_mmd_indirect(priv, +- CORE_GSWPLL_GRP1, +- MDIO_MMD_VEND2, +- 0); +- +- /* Set core clock into 500Mhz */ +- core_write(priv, CORE_GSWPLL_GRP2, +- RG_GSWPLL_POSDIV_500M(1) | +- RG_GSWPLL_FBKDIV_500M(25)); +- +- /* Enable PLL */ +- core_write(priv, CORE_GSWPLL_GRP1, +- RG_GSWPLL_EN_PRE | +- RG_GSWPLL_POSDIV_200M(2) | +- RG_GSWPLL_FBKDIV_200M(32)); +- +- /* Enable MT7530 core clock */ +- core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); +- } ++ /* Disable MT7530 core clock */ ++ core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); ++ ++ /* Disable PLL, since phy_device has not yet been created ++ * provided for phy_[read,write]_mmd_indirect is called, we ++ * provide our own core_write_mmd_indirect to complete this ++ * function. ++ */ ++ core_write_mmd_indirect(priv, ++ CORE_GSWPLL_GRP1, ++ MDIO_MMD_VEND2, ++ 0); ++ ++ /* Set core clock into 500Mhz */ ++ core_write(priv, CORE_GSWPLL_GRP2, ++ RG_GSWPLL_POSDIV_500M(1) | ++ RG_GSWPLL_FBKDIV_500M(25)); ++ ++ /* Enable PLL */ ++ core_write(priv, CORE_GSWPLL_GRP1, ++ RG_GSWPLL_EN_PRE | ++ RG_GSWPLL_POSDIV_200M(2) | ++ RG_GSWPLL_FBKDIV_200M(32)); ++ ++ /* Enable MT7530 core clock */ ++ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); + + /* Setup the MT7530 TRGMII Tx Clock */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); diff --git a/target/linux/generic/pending-5.10/761-net-dsa-mt7530-Support-EEE-features.patch b/target/linux/generic/pending-5.10/761-net-dsa-mt7530-Support-EEE-features.patch index 3e4413db02..3e654f4b04 100644 --- a/target/linux/generic/pending-5.10/761-net-dsa-mt7530-Support-EEE-features.patch +++ b/target/linux/generic/pending-5.10/761-net-dsa-mt7530-Support-EEE-features.patch @@ -9,7 +9,7 @@ Content-Transfer-Encoding: 8bit Signed-off-by: René van Dorst --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2266,9 +2266,13 @@ static void mt753x_phylink_mac_link_up(s +@@ -2264,9 +2264,13 @@ static void mt753x_phylink_mac_link_up(s switch (speed) { case SPEED_1000: mcr |= PMCR_FORCE_SPEED_1000; @@ -23,7 +23,7 @@ Signed-off-by: René van Dorst break; } if (duplex == DUPLEX_FULL) { -@@ -2509,6 +2513,54 @@ mt753x_phy_write(struct dsa_switch *ds, +@@ -2507,6 +2511,54 @@ mt753x_phy_write(struct dsa_switch *ds, return priv->info->phy_write(ds, port, regnum, val); } @@ -78,7 +78,7 @@ Signed-off-by: René van Dorst static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt753x_setup, -@@ -2537,6 +2589,8 @@ static const struct dsa_switch_ops mt753 +@@ -2535,6 +2587,8 @@ static const struct dsa_switch_ops mt753 .phylink_mac_an_restart = mt753x_phylink_mac_an_restart, .phylink_mac_link_down = mt753x_phylink_mac_link_down, .phylink_mac_link_up = mt753x_phylink_mac_link_up, diff --git a/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch b/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch index 1822647ff1..b9ca691f6f 100644 --- a/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch +++ b/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch @@ -9,7 +9,7 @@ Content-Transfer-Encoding: 8bit Signed-off-by: René van Dorst --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1419,9 +1419,13 @@ static void mt7530_phylink_mac_config(st +@@ -1417,9 +1417,13 @@ static void mt7530_phylink_mac_config(st switch (state->speed) { case SPEED_1000: mcr_new |= PMCR_FORCE_SPEED_1000; @@ -23,7 +23,7 @@ Signed-off-by: René van Dorst break; } if (state->duplex == DUPLEX_FULL) { -@@ -1557,6 +1561,54 @@ mt7530_phylink_mac_link_state(struct dsa +@@ -1555,6 +1559,54 @@ mt7530_phylink_mac_link_state(struct dsa return 1; } @@ -78,7 +78,7 @@ Signed-off-by: René van Dorst static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt7530_setup, -@@ -1584,6 +1636,8 @@ static const struct dsa_switch_ops mt753 +@@ -1582,6 +1634,8 @@ static const struct dsa_switch_ops mt753 .phylink_mac_config = mt7530_phylink_mac_config, .phylink_mac_link_down = mt7530_phylink_mac_link_down, .phylink_mac_link_up = mt7530_phylink_mac_link_up,