From: Álvaro Fernández Rojas Date: Mon, 23 Dec 2019 12:42:55 +0000 (+0100) Subject: brcm2708: organize kernel patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=67dcc43f3a22dc3a7ac07a7065971b426feeb043;p=openwrt%2Fstaging%2Fluka.git brcm2708: organize kernel patches Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/brcm2708/patches-4.19/950-0001-arm-partially-revert-702b94bff3c50542a6e4ab9a4f4cef0.patch b/target/linux/brcm2708/patches-4.19/950-0001-arm-partially-revert-702b94bff3c50542a6e4ab9a4f4cef0.patch index acaec70930..38ef7b310d 100644 --- a/target/linux/brcm2708/patches-4.19/950-0001-arm-partially-revert-702b94bff3c50542a6e4ab9a4f4cef0.patch +++ b/target/linux/brcm2708/patches-4.19/950-0001-arm-partially-revert-702b94bff3c50542a6e4ab9a4f4cef0.patch @@ -1,7 +1,7 @@ From 2096cda971fed28cbc822d8c7d489bf85af22f34 Mon Sep 17 00:00:00 2001 From: Dan Pasanen Date: Thu, 21 Sep 2017 09:55:42 -0500 -Subject: [PATCH 001/806] arm: partially revert +Subject: [PATCH] arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65 * Re-expose some dmi APIs for use in VCSM diff --git a/target/linux/brcm2708/patches-4.19/950-0002-smsx95xx-fix-crimes-against-truesize.patch b/target/linux/brcm2708/patches-4.19/950-0002-smsx95xx-fix-crimes-against-truesize.patch index b06fe3d0de..248601cb7f 100644 --- a/target/linux/brcm2708/patches-4.19/950-0002-smsx95xx-fix-crimes-against-truesize.patch +++ b/target/linux/brcm2708/patches-4.19/950-0002-smsx95xx-fix-crimes-against-truesize.patch @@ -1,7 +1,7 @@ From 26bb49317b44d0927ed7b4be1d72aa11853a01f7 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 19 Feb 2015 18:47:12 +0000 -Subject: [PATCH 002/806] smsx95xx: fix crimes against truesize +Subject: [PATCH] smsx95xx: fix crimes against truesize smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings. diff --git a/target/linux/brcm2708/patches-4.19/950-0003-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch b/target/linux/brcm2708/patches-4.19/950-0003-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch index 862d898cbc..7b165cb900 100644 --- a/target/linux/brcm2708/patches-4.19/950-0003-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch +++ b/target/linux/brcm2708/patches-4.19/950-0003-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch @@ -1,7 +1,7 @@ From ac6edc14a931f10413d4586c2d0d1f2ddc1a416a Mon Sep 17 00:00:00 2001 From: Sam Nazarko Date: Fri, 1 Apr 2016 17:27:21 +0100 -Subject: [PATCH 003/806] smsc95xx: Experimental: Enable turbo_mode and +Subject: [PATCH] smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default See: http://forum.kodi.tv/showthread.php?tid=285288 diff --git a/target/linux/brcm2708/patches-4.19/950-0004-Allow-mac-address-to-be-set-in-smsc95xx.patch b/target/linux/brcm2708/patches-4.19/950-0004-Allow-mac-address-to-be-set-in-smsc95xx.patch index 7c8a109464..4ada237162 100644 --- a/target/linux/brcm2708/patches-4.19/950-0004-Allow-mac-address-to-be-set-in-smsc95xx.patch +++ b/target/linux/brcm2708/patches-4.19/950-0004-Allow-mac-address-to-be-set-in-smsc95xx.patch @@ -1,7 +1,7 @@ From fa1451d655f59916aec1c1e4fb17f19a78005066 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Tue, 26 Mar 2013 17:26:38 +0000 -Subject: [PATCH 004/806] Allow mac address to be set in smsc95xx +Subject: [PATCH] Allow mac address to be set in smsc95xx Signed-off-by: popcornmix --- diff --git a/target/linux/brcm2708/patches-4.19/950-0005-Protect-__release_resource-against-resources-without.patch b/target/linux/brcm2708/patches-4.19/950-0005-Protect-__release_resource-against-resources-without.patch index 38fc5d8a4d..96ab329c9e 100644 --- a/target/linux/brcm2708/patches-4.19/950-0005-Protect-__release_resource-against-resources-without.patch +++ b/target/linux/brcm2708/patches-4.19/950-0005-Protect-__release_resource-against-resources-without.patch @@ -1,7 +1,7 @@ From 6209e42d384cfe873123b411a9bd170de027d4b5 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 13 Mar 2015 12:43:36 +0000 -Subject: [PATCH 005/806] Protect __release_resource against resources without +Subject: [PATCH] Protect __release_resource against resources without parents Without this patch, removing a device tree overlay can crash here. diff --git a/target/linux/brcm2708/patches-4.19/950-0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch b/target/linux/brcm2708/patches-4.19/950-0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch index 8dd46f2508..1331c13374 100644 --- a/target/linux/brcm2708/patches-4.19/950-0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch +++ b/target/linux/brcm2708/patches-4.19/950-0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch @@ -1,7 +1,7 @@ From 5e9082be2fca137fe13b8af15aa0b9d178cd99c1 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 4 Dec 2015 17:41:50 +0000 -Subject: [PATCH 006/806] irq-bcm2836: Prevent spurious interrupts, and trap +Subject: [PATCH] irq-bcm2836: Prevent spurious interrupts, and trap them early The old arch-specific IRQ macros included a dsb to ensure the diff --git a/target/linux/brcm2708/patches-4.19/950-0007-irq-bcm2836-Avoid-Invalid-trigger-warning.patch b/target/linux/brcm2708/patches-4.19/950-0007-irq-bcm2836-Avoid-Invalid-trigger-warning.patch index bf78731b15..8d1feee2be 100644 --- a/target/linux/brcm2708/patches-4.19/950-0007-irq-bcm2836-Avoid-Invalid-trigger-warning.patch +++ b/target/linux/brcm2708/patches-4.19/950-0007-irq-bcm2836-Avoid-Invalid-trigger-warning.patch @@ -1,7 +1,7 @@ From b8a56e2dbae7dbcc0537b03f8a99eb5ba638876b Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 9 Feb 2017 14:33:30 +0000 -Subject: [PATCH 007/806] irq-bcm2836: Avoid "Invalid trigger warning" +Subject: [PATCH] irq-bcm2836: Avoid "Invalid trigger warning" Initialise the level for each IRQ to avoid a warning from the arm arch timer code. diff --git a/target/linux/brcm2708/patches-4.19/950-0008-irqchip-bcm2835-Add-FIQ-support.patch b/target/linux/brcm2708/patches-4.19/950-0008-irqchip-bcm2835-Add-FIQ-support.patch index f1cc3c86c1..ea2b54075d 100644 --- a/target/linux/brcm2708/patches-4.19/950-0008-irqchip-bcm2835-Add-FIQ-support.patch +++ b/target/linux/brcm2708/patches-4.19/950-0008-irqchip-bcm2835-Add-FIQ-support.patch @@ -1,7 +1,7 @@ From 9334b65d3020bca44aa2695b84eda865ecc340e2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= Date: Fri, 12 Jun 2015 19:01:05 +0200 -Subject: [PATCH 008/806] irqchip: bcm2835: Add FIQ support +Subject: [PATCH] irqchip: bcm2835: Add FIQ support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0009-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch b/target/linux/brcm2708/patches-4.19/950-0009-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch index f701116afb..56dd9429fa 100644 --- a/target/linux/brcm2708/patches-4.19/950-0009-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch +++ b/target/linux/brcm2708/patches-4.19/950-0009-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch @@ -1,7 +1,7 @@ From a2416a2926904e3a07bdb10b9cf3c7871e87583c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= Date: Fri, 23 Oct 2015 16:26:55 +0200 -Subject: [PATCH 009/806] irqchip: irq-bcm2835: Add 2836 FIQ support +Subject: [PATCH] irqchip: irq-bcm2835: Add 2836 FIQ support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0010-spidev-Add-spidev-compatible-string-to-silence-warni.patch b/target/linux/brcm2708/patches-4.19/950-0010-spidev-Add-spidev-compatible-string-to-silence-warni.patch index 4575bdfc41..91e27c36cc 100644 --- a/target/linux/brcm2708/patches-4.19/950-0010-spidev-Add-spidev-compatible-string-to-silence-warni.patch +++ b/target/linux/brcm2708/patches-4.19/950-0010-spidev-Add-spidev-compatible-string-to-silence-warni.patch @@ -1,7 +1,7 @@ From e21d0b86f4a9c2c1f61e183e5dfcc1cf37058ca1 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Tue, 14 Jul 2015 10:26:09 +0100 -Subject: [PATCH 010/806] spidev: Add "spidev" compatible string to silence +Subject: [PATCH] spidev: Add "spidev" compatible string to silence warning See: https://github.com/raspberrypi/linux/issues/1054 diff --git a/target/linux/brcm2708/patches-4.19/950-0011-spi-bcm2835-Support-pin-groups-other-than-7-11.patch b/target/linux/brcm2708/patches-4.19/950-0011-spi-bcm2835-Support-pin-groups-other-than-7-11.patch index db658bcf2e..0517999883 100644 --- a/target/linux/brcm2708/patches-4.19/950-0011-spi-bcm2835-Support-pin-groups-other-than-7-11.patch +++ b/target/linux/brcm2708/patches-4.19/950-0011-spi-bcm2835-Support-pin-groups-other-than-7-11.patch @@ -1,7 +1,7 @@ From 61ca6adb1fc93622bb85acc18b6ce4f620c8c690 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Wed, 24 Jun 2015 14:10:44 +0100 -Subject: [PATCH 011/806] spi-bcm2835: Support pin groups other than 7-11 +Subject: [PATCH] spi-bcm2835: Support pin groups other than 7-11 The spi-bcm2835 driver automatically uses GPIO chip-selects due to some unreliability of the native ones. In doing so it chooses the diff --git a/target/linux/brcm2708/patches-4.19/950-0012-spi-bcm2835-Disable-forced-software-CS.patch b/target/linux/brcm2708/patches-4.19/950-0012-spi-bcm2835-Disable-forced-software-CS.patch index 1df35981fd..30a65ff35e 100644 --- a/target/linux/brcm2708/patches-4.19/950-0012-spi-bcm2835-Disable-forced-software-CS.patch +++ b/target/linux/brcm2708/patches-4.19/950-0012-spi-bcm2835-Disable-forced-software-CS.patch @@ -1,7 +1,7 @@ From 2610aceda837370048f86b4af27852463c3b5a47 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 1 Jul 2016 22:09:24 +0100 -Subject: [PATCH 012/806] spi-bcm2835: Disable forced software CS +Subject: [PATCH] spi-bcm2835: Disable forced software CS Select software CS in bcm2708_common.dtsi, and disable the automatic conversion in the driver to allow hardware CS to be re-enabled with an diff --git a/target/linux/brcm2708/patches-4.19/950-0013-spi-bcm2835-Remove-unused-code.patch b/target/linux/brcm2708/patches-4.19/950-0013-spi-bcm2835-Remove-unused-code.patch index db4bb49527..41d6c8d363 100644 --- a/target/linux/brcm2708/patches-4.19/950-0013-spi-bcm2835-Remove-unused-code.patch +++ b/target/linux/brcm2708/patches-4.19/950-0013-spi-bcm2835-Remove-unused-code.patch @@ -1,7 +1,7 @@ From 80dc41f5617db0dbe3e17a399603a50b91997c5b Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Tue, 8 Nov 2016 21:35:38 +0000 -Subject: [PATCH 013/806] spi-bcm2835: Remove unused code +Subject: [PATCH] spi-bcm2835: Remove unused code --- drivers/spi/spi-bcm2835.c | 61 --------------------------------------- diff --git a/target/linux/brcm2708/patches-4.19/950-0014-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch b/target/linux/brcm2708/patches-4.19/950-0014-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch index b43e7a0451..05bc4a0f4d 100644 --- a/target/linux/brcm2708/patches-4.19/950-0014-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch +++ b/target/linux/brcm2708/patches-4.19/950-0014-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch @@ -1,7 +1,7 @@ From 10d11b6b5410b9d31845efd23147fd08477a5151 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= Date: Sat, 3 Oct 2015 22:22:55 +0200 -Subject: [PATCH 014/806] dmaengine: bcm2835: Load driver early and support +Subject: [PATCH] dmaengine: bcm2835: Load driver early and support legacy API MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 diff --git a/target/linux/brcm2708/patches-4.19/950-0015-firmware-Updated-mailbox-header.patch b/target/linux/brcm2708/patches-4.19/950-0015-firmware-Updated-mailbox-header.patch index d6921a6e88..1eca3a9265 100644 --- a/target/linux/brcm2708/patches-4.19/950-0015-firmware-Updated-mailbox-header.patch +++ b/target/linux/brcm2708/patches-4.19/950-0015-firmware-Updated-mailbox-header.patch @@ -1,7 +1,7 @@ From e00fde59167c31cf376c74b333b58f011b244dfa Mon Sep 17 00:00:00 2001 From: popcornmix Date: Mon, 25 Jan 2016 17:25:12 +0000 -Subject: [PATCH 015/806] firmware: Updated mailbox header +Subject: [PATCH] firmware: Updated mailbox header --- include/soc/bcm2835/raspberrypi-firmware.h | 5 +++++ diff --git a/target/linux/brcm2708/patches-4.19/950-0016-rtc-Add-SPI-alias-for-pcf2123-driver.patch b/target/linux/brcm2708/patches-4.19/950-0016-rtc-Add-SPI-alias-for-pcf2123-driver.patch index 29119dd676..a08cd13456 100644 --- a/target/linux/brcm2708/patches-4.19/950-0016-rtc-Add-SPI-alias-for-pcf2123-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0016-rtc-Add-SPI-alias-for-pcf2123-driver.patch @@ -1,7 +1,7 @@ From 3c8282fa8f1a50bf5ff5b83e83d97b37433bbdd9 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Wed, 15 Jun 2016 16:48:41 +0100 -Subject: [PATCH 016/806] rtc: Add SPI alias for pcf2123 driver +Subject: [PATCH] rtc: Add SPI alias for pcf2123 driver Without this alias, Device Tree won't cause the driver to be loaded. diff --git a/target/linux/brcm2708/patches-4.19/950-0017-watchdog-bcm2835-Support-setting-reboot-partition.patch b/target/linux/brcm2708/patches-4.19/950-0017-watchdog-bcm2835-Support-setting-reboot-partition.patch index 6db6881888..ce3bf61911 100644 --- a/target/linux/brcm2708/patches-4.19/950-0017-watchdog-bcm2835-Support-setting-reboot-partition.patch +++ b/target/linux/brcm2708/patches-4.19/950-0017-watchdog-bcm2835-Support-setting-reboot-partition.patch @@ -1,7 +1,7 @@ From 8018869c6c8590018c1cd272475eda0dbf72a7ec Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= Date: Fri, 7 Oct 2016 16:50:59 +0200 -Subject: [PATCH 017/806] watchdog: bcm2835: Support setting reboot partition +Subject: [PATCH] watchdog: bcm2835: Support setting reboot partition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0018-reboot-Use-power-off-rather-than-busy-spinning-when-.patch b/target/linux/brcm2708/patches-4.19/950-0018-reboot-Use-power-off-rather-than-busy-spinning-when-.patch index 62a8b13f11..dc83b7f8ef 100644 --- a/target/linux/brcm2708/patches-4.19/950-0018-reboot-Use-power-off-rather-than-busy-spinning-when-.patch +++ b/target/linux/brcm2708/patches-4.19/950-0018-reboot-Use-power-off-rather-than-busy-spinning-when-.patch @@ -1,7 +1,7 @@ From c296f60b7a5b3c4f82aa0768030ebf64ab64792b Mon Sep 17 00:00:00 2001 From: popcornmix Date: Tue, 5 Apr 2016 19:40:12 +0100 -Subject: [PATCH 018/806] reboot: Use power off rather than busy spinning when +Subject: [PATCH] reboot: Use power off rather than busy spinning when halt is requested --- diff --git a/target/linux/brcm2708/patches-4.19/950-0019-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch b/target/linux/brcm2708/patches-4.19/950-0019-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch index e33e4ee517..e1f6950156 100644 --- a/target/linux/brcm2708/patches-4.19/950-0019-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch +++ b/target/linux/brcm2708/patches-4.19/950-0019-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch @@ -1,7 +1,7 @@ From f54671cb165da1c13d33777cd59329a464f9863b Mon Sep 17 00:00:00 2001 From: popcornmix Date: Wed, 9 Nov 2016 13:02:52 +0000 -Subject: [PATCH 019/806] bcm: Make RASPBERRYPI_POWER depend on PM +Subject: [PATCH] bcm: Make RASPBERRYPI_POWER depend on PM --- drivers/soc/bcm/Kconfig | 1 + diff --git a/target/linux/brcm2708/patches-4.19/950-0020-Register-the-clocks-early-during-the-boot-process-so.patch b/target/linux/brcm2708/patches-4.19/950-0020-Register-the-clocks-early-during-the-boot-process-so.patch index f77e14fc0f..6665d4d112 100644 --- a/target/linux/brcm2708/patches-4.19/950-0020-Register-the-clocks-early-during-the-boot-process-so.patch +++ b/target/linux/brcm2708/patches-4.19/950-0020-Register-the-clocks-early-during-the-boot-process-so.patch @@ -1,7 +1,7 @@ From 05caac5f388bf0b821d4a75e480a74ae40fc8478 Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Fri, 2 Sep 2016 16:45:27 +0100 -Subject: [PATCH 020/806] Register the clocks early during the boot process, so +Subject: [PATCH] Register the clocks early during the boot process, so that special/critical clocks can get enabled early on in the boot process avoiding the risk of disabling a clock, pll_divider or pll when a claiming driver fails to install propperly - maybe it needs to defer. diff --git a/target/linux/brcm2708/patches-4.19/950-0021-bcm2835-rng-Avoid-initialising-if-already-enabled.patch b/target/linux/brcm2708/patches-4.19/950-0021-bcm2835-rng-Avoid-initialising-if-already-enabled.patch index 4b33ad22b2..30ab0504ae 100644 --- a/target/linux/brcm2708/patches-4.19/950-0021-bcm2835-rng-Avoid-initialising-if-already-enabled.patch +++ b/target/linux/brcm2708/patches-4.19/950-0021-bcm2835-rng-Avoid-initialising-if-already-enabled.patch @@ -1,7 +1,7 @@ From d5df60f32f3c3b2f7f6d758ac08de6acb9fd947f Mon Sep 17 00:00:00 2001 From: popcornmix Date: Tue, 6 Dec 2016 17:05:39 +0000 -Subject: [PATCH 021/806] bcm2835-rng: Avoid initialising if already enabled +Subject: [PATCH] bcm2835-rng: Avoid initialising if already enabled Avoids the 0x40000 cycles of warmup again if firmware has already used it --- diff --git a/target/linux/brcm2708/patches-4.19/950-0022-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch b/target/linux/brcm2708/patches-4.19/950-0022-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch index c968717e31..6d5d7d4d8b 100644 --- a/target/linux/brcm2708/patches-4.19/950-0022-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch +++ b/target/linux/brcm2708/patches-4.19/950-0022-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch @@ -1,7 +1,7 @@ From 3437db6e19e29ff9b6d2eef9a5ee703f04ca1d41 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Wed, 24 Aug 2016 16:28:44 +0100 -Subject: [PATCH 022/806] kbuild: Ignore dtco targets when filtering symbols +Subject: [PATCH] kbuild: Ignore dtco targets when filtering symbols --- scripts/Kbuild.include | 2 +- diff --git a/target/linux/brcm2708/patches-4.19/950-0023-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch b/target/linux/brcm2708/patches-4.19/950-0023-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch index 83451a9954..e4a1d7f660 100644 --- a/target/linux/brcm2708/patches-4.19/950-0023-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch +++ b/target/linux/brcm2708/patches-4.19/950-0023-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch @@ -1,7 +1,7 @@ From f1f199b682e258674137105f49d033cb81612ab7 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Mon, 13 Feb 2017 17:20:08 +0000 -Subject: [PATCH 023/806] clk-bcm2835: Mark used PLLs and dividers CRITICAL +Subject: [PATCH] clk-bcm2835: Mark used PLLs and dividers CRITICAL The VPU configures and relies on several PLLs and dividers. Mark all enabled dividers and their PLLs as CRITICAL to prevent the kernel from diff --git a/target/linux/brcm2708/patches-4.19/950-0024-clk-bcm2835-Add-claim-clocks-property.patch b/target/linux/brcm2708/patches-4.19/950-0024-clk-bcm2835-Add-claim-clocks-property.patch index 9b58d00460..63f1f9f74a 100644 --- a/target/linux/brcm2708/patches-4.19/950-0024-clk-bcm2835-Add-claim-clocks-property.patch +++ b/target/linux/brcm2708/patches-4.19/950-0024-clk-bcm2835-Add-claim-clocks-property.patch @@ -1,7 +1,7 @@ From 787234827719aa1d44b079969419d91b665a491d Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Mon, 13 Feb 2017 17:20:08 +0000 -Subject: [PATCH 024/806] clk-bcm2835: Add claim-clocks property +Subject: [PATCH] clk-bcm2835: Add claim-clocks property The claim-clocks property can be used to prevent PLLs and dividers from being marked as critical. It contains a vector of clock IDs, diff --git a/target/linux/brcm2708/patches-4.19/950-0025-clk-bcm2835-Read-max-core-clock-from-firmware.patch b/target/linux/brcm2708/patches-4.19/950-0025-clk-bcm2835-Read-max-core-clock-from-firmware.patch index 5a38d8c6ce..2838360a00 100644 --- a/target/linux/brcm2708/patches-4.19/950-0025-clk-bcm2835-Read-max-core-clock-from-firmware.patch +++ b/target/linux/brcm2708/patches-4.19/950-0025-clk-bcm2835-Read-max-core-clock-from-firmware.patch @@ -1,7 +1,7 @@ From f8e7e4a65b3f99452db67cfb7e21afc80b8af7f2 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Mon, 6 Mar 2017 09:06:18 +0000 -Subject: [PATCH 025/806] clk-bcm2835: Read max core clock from firmware +Subject: [PATCH] clk-bcm2835: Read max core clock from firmware The VPU is responsible for managing the core clock, usually under direction from the bcm2835-cpufreq driver but not via the clk-bcm2835 diff --git a/target/linux/brcm2708/patches-4.19/950-0026-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.19/950-0026-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch index 327546eddd..2df0d37b8d 100644 --- a/target/linux/brcm2708/patches-4.19/950-0026-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch +++ b/target/linux/brcm2708/patches-4.19/950-0026-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch @@ -1,7 +1,7 @@ From 6272fd1e55945522b156a28c1f605b69ae6e05b7 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 9 May 2016 17:28:18 -0700 -Subject: [PATCH 026/806] clk: bcm2835: Mark GPIO clocks enabled at boot as +Subject: [PATCH] clk: bcm2835: Mark GPIO clocks enabled at boot as critical. These divide off of PLLD_PER and are used for the ethernet and wifi diff --git a/target/linux/brcm2708/patches-4.19/950-0027-sound-Demote-deferral-errors-to-INFO-level.patch b/target/linux/brcm2708/patches-4.19/950-0027-sound-Demote-deferral-errors-to-INFO-level.patch index 3a78d7196a..fcb401c090 100644 --- a/target/linux/brcm2708/patches-4.19/950-0027-sound-Demote-deferral-errors-to-INFO-level.patch +++ b/target/linux/brcm2708/patches-4.19/950-0027-sound-Demote-deferral-errors-to-INFO-level.patch @@ -1,7 +1,7 @@ From fd613a5d5dc7f023d7d983aee9d854fd3a41d669 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 9 Feb 2017 14:36:44 +0000 -Subject: [PATCH 027/806] sound: Demote deferral errors to INFO level +Subject: [PATCH] sound: Demote deferral errors to INFO level At present there is no mechanism to specify driver load order, which can lead to deferrals and repeated retries until successful. diff --git a/target/linux/brcm2708/patches-4.19/950-0028-Update-vfpmodule.c.patch b/target/linux/brcm2708/patches-4.19/950-0028-Update-vfpmodule.c.patch index f589cf4b1d..7fd6024715 100644 --- a/target/linux/brcm2708/patches-4.19/950-0028-Update-vfpmodule.c.patch +++ b/target/linux/brcm2708/patches-4.19/950-0028-Update-vfpmodule.c.patch @@ -1,7 +1,7 @@ From 0eb679e4b41dab1e421415917feae44d00e1687f Mon Sep 17 00:00:00 2001 From: Claggy3 Date: Sat, 11 Feb 2017 14:00:30 +0000 -Subject: [PATCH 028/806] Update vfpmodule.c +Subject: [PATCH] Update vfpmodule.c Christopher Alexander Tobias Schulze - May 2, 2015, 11:57 a.m. This patch fixes a problem with VFP state save and restore related diff --git a/target/linux/brcm2708/patches-4.19/950-0029-i2c-bcm2835-Add-debug-support.patch b/target/linux/brcm2708/patches-4.19/950-0029-i2c-bcm2835-Add-debug-support.patch index 4f7e2238d9..d6372ec7cb 100644 --- a/target/linux/brcm2708/patches-4.19/950-0029-i2c-bcm2835-Add-debug-support.patch +++ b/target/linux/brcm2708/patches-4.19/950-0029-i2c-bcm2835-Add-debug-support.patch @@ -1,7 +1,7 @@ From b6494e2070983020d56f82d9d0be74d11b001823 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= Date: Tue, 1 Nov 2016 15:15:41 +0100 -Subject: [PATCH 029/806] i2c: bcm2835: Add debug support +Subject: [PATCH] i2c: bcm2835: Add debug support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0030-mm-Remove-the-PFN-busy-warning.patch b/target/linux/brcm2708/patches-4.19/950-0030-mm-Remove-the-PFN-busy-warning.patch index f08379057f..76a53fea0d 100644 --- a/target/linux/brcm2708/patches-4.19/950-0030-mm-Remove-the-PFN-busy-warning.patch +++ b/target/linux/brcm2708/patches-4.19/950-0030-mm-Remove-the-PFN-busy-warning.patch @@ -1,7 +1,7 @@ From a8a5ad555b7168ce90263395dc5f26b99af9bf4e Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 18 Dec 2014 16:07:15 -0800 -Subject: [PATCH 030/806] mm: Remove the PFN busy warning +Subject: [PATCH] mm: Remove the PFN busy warning See commit dae803e165a11bc88ca8dbc07a11077caf97bbcb -- the warning is expected sometimes when using CMA. However, that commit still spams diff --git a/target/linux/brcm2708/patches-4.19/950-0031-ASoC-Add-prompt-for-ICS43432-codec.patch b/target/linux/brcm2708/patches-4.19/950-0031-ASoC-Add-prompt-for-ICS43432-codec.patch index 88148a68a1..9007aba3f0 100644 --- a/target/linux/brcm2708/patches-4.19/950-0031-ASoC-Add-prompt-for-ICS43432-codec.patch +++ b/target/linux/brcm2708/patches-4.19/950-0031-ASoC-Add-prompt-for-ICS43432-codec.patch @@ -1,7 +1,7 @@ From e4cd2b482eadc7f7901ba6c0df3080f792c4d655 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 23 Mar 2017 10:06:56 +0000 -Subject: [PATCH 031/806] ASoC: Add prompt for ICS43432 codec +Subject: [PATCH] ASoC: Add prompt for ICS43432 codec Without a prompt string, a config setting can't be included in a defconfig. Give CONFIG_SND_SOC_ICS43432 a prompt so that Pi soundcards diff --git a/target/linux/brcm2708/patches-4.19/950-0032-irqchip-irq-bcm2836-Remove-regmap-and-syscon-use.patch b/target/linux/brcm2708/patches-4.19/950-0032-irqchip-irq-bcm2836-Remove-regmap-and-syscon-use.patch index 010eff83a2..0881053ab2 100644 --- a/target/linux/brcm2708/patches-4.19/950-0032-irqchip-irq-bcm2836-Remove-regmap-and-syscon-use.patch +++ b/target/linux/brcm2708/patches-4.19/950-0032-irqchip-irq-bcm2836-Remove-regmap-and-syscon-use.patch @@ -1,7 +1,7 @@ From f1905bc5137db49ef155f835d52d68cb86c4c9a9 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Tue, 23 Jan 2018 16:52:45 +0000 -Subject: [PATCH 032/806] irqchip: irq-bcm2836: Remove regmap and syscon use +Subject: [PATCH] irqchip: irq-bcm2836: Remove regmap and syscon use The syscon node defines a register range that duplicates that used by the local_intc node on bcm2836/7. Since irq-bcm2835 and irq-bcm2836 are diff --git a/target/linux/brcm2708/patches-4.19/950-0033-lan78xx-Enable-LEDs-and-auto-negotiation.patch b/target/linux/brcm2708/patches-4.19/950-0033-lan78xx-Enable-LEDs-and-auto-negotiation.patch index 48939f8484..847d8f5102 100644 --- a/target/linux/brcm2708/patches-4.19/950-0033-lan78xx-Enable-LEDs-and-auto-negotiation.patch +++ b/target/linux/brcm2708/patches-4.19/950-0033-lan78xx-Enable-LEDs-and-auto-negotiation.patch @@ -1,7 +1,7 @@ From 645eb2cf211c04496c9f5daca23ab16ce796b0df Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Tue, 17 Oct 2017 15:04:29 +0100 -Subject: [PATCH 033/806] lan78xx: Enable LEDs and auto-negotiation +Subject: [PATCH] lan78xx: Enable LEDs and auto-negotiation For applications of the LAN78xx that don't have valid programmed EEPROMs or OTPs, enabling both LEDs and auto-negotiation by default diff --git a/target/linux/brcm2708/patches-4.19/950-0034-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch b/target/linux/brcm2708/patches-4.19/950-0034-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch index 61ab7095fb..1d6fdacfa8 100644 --- a/target/linux/brcm2708/patches-4.19/950-0034-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch +++ b/target/linux/brcm2708/patches-4.19/950-0034-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch @@ -1,7 +1,7 @@ From c048d8c7b1ae0d56d9ee1bca2be8cc9da5a43bba Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Tue, 23 Feb 2016 17:26:48 +0000 -Subject: [PATCH 034/806] amba_pl011: Don't use DT aliases for numbering +Subject: [PATCH] amba_pl011: Don't use DT aliases for numbering The pl011 driver looks for DT aliases of the form "serial", and if found uses as the device ID. This can cause diff --git a/target/linux/brcm2708/patches-4.19/950-0035-amba_pl011-Round-input-clock-up.patch b/target/linux/brcm2708/patches-4.19/950-0035-amba_pl011-Round-input-clock-up.patch index d5e9f3174c..8768351034 100644 --- a/target/linux/brcm2708/patches-4.19/950-0035-amba_pl011-Round-input-clock-up.patch +++ b/target/linux/brcm2708/patches-4.19/950-0035-amba_pl011-Round-input-clock-up.patch @@ -1,7 +1,7 @@ From 610cb34f3d7c5fdffb0db82538731714a2df1d13 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Wed, 1 Mar 2017 16:07:39 +0000 -Subject: [PATCH 035/806] amba_pl011: Round input clock up +Subject: [PATCH] amba_pl011: Round input clock up The UART clock is initialised to be as close to the requested frequency as possible without exceeding it. Now that there is a diff --git a/target/linux/brcm2708/patches-4.19/950-0036-amba_pl011-Insert-mb-for-correct-FIFO-handling.patch b/target/linux/brcm2708/patches-4.19/950-0036-amba_pl011-Insert-mb-for-correct-FIFO-handling.patch index eef29187ae..30ac2a883c 100644 --- a/target/linux/brcm2708/patches-4.19/950-0036-amba_pl011-Insert-mb-for-correct-FIFO-handling.patch +++ b/target/linux/brcm2708/patches-4.19/950-0036-amba_pl011-Insert-mb-for-correct-FIFO-handling.patch @@ -1,7 +1,7 @@ From 76627df3e5f0513118dac20710766f97fc5ca32d Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 29 Sep 2017 10:32:19 +0100 -Subject: [PATCH 036/806] amba_pl011: Insert mb() for correct FIFO handling +Subject: [PATCH] amba_pl011: Insert mb() for correct FIFO handling The pl011 register accessor functions use the _relaxed versions of the standard readl() and writel() functions, meaning that there are no diff --git a/target/linux/brcm2708/patches-4.19/950-0037-amba_pl011-Add-cts-event-workaround-DT-property.patch b/target/linux/brcm2708/patches-4.19/950-0037-amba_pl011-Add-cts-event-workaround-DT-property.patch index e5a3c39b3f..d7514a5525 100644 --- a/target/linux/brcm2708/patches-4.19/950-0037-amba_pl011-Add-cts-event-workaround-DT-property.patch +++ b/target/linux/brcm2708/patches-4.19/950-0037-amba_pl011-Add-cts-event-workaround-DT-property.patch @@ -1,7 +1,7 @@ From 17a4507175ca6018ea40e91c9d753bc39f043d99 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 29 Sep 2017 10:32:19 +0100 -Subject: [PATCH 037/806] amba_pl011: Add cts-event-workaround DT property +Subject: [PATCH] amba_pl011: Add cts-event-workaround DT property The BCM2835 PL011 implementation seems to have a bug that can lead to a transmission lockup if CTS changes frequently. A workaround was added to diff --git a/target/linux/brcm2708/patches-4.19/950-0038-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch b/target/linux/brcm2708/patches-4.19/950-0038-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch index 307e82ede4..26c08cd1a2 100644 --- a/target/linux/brcm2708/patches-4.19/950-0038-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch +++ b/target/linux/brcm2708/patches-4.19/950-0038-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch @@ -1,7 +1,7 @@ From 491316e4e140152fb6c66fa99716450bb13ea49a Mon Sep 17 00:00:00 2001 From: notro Date: Thu, 10 Jul 2014 13:59:47 +0200 -Subject: [PATCH 038/806] pinctrl-bcm2835: Set base to 0 give expected gpio +Subject: [PATCH] pinctrl-bcm2835: Set base to 0 give expected gpio numbering Signed-off-by: Noralf Tronnes diff --git a/target/linux/brcm2708/patches-4.19/950-0039-Main-bcm2708-bcm2709-linux-port.patch b/target/linux/brcm2708/patches-4.19/950-0039-Main-bcm2708-bcm2709-linux-port.patch index 4f14c4c18a..a553d5a854 100644 --- a/target/linux/brcm2708/patches-4.19/950-0039-Main-bcm2708-bcm2709-linux-port.patch +++ b/target/linux/brcm2708/patches-4.19/950-0039-Main-bcm2708-bcm2709-linux-port.patch @@ -1,7 +1,7 @@ From b37c8c275b90b3730ad99b0e96ae5e36895b26e8 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Sun, 12 May 2013 12:24:19 +0100 -Subject: [PATCH 039/806] Main bcm2708/bcm2709 linux port +Subject: [PATCH] Main bcm2708/bcm2709 linux port MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0040-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-4.19/950-0040-Add-dwc_otg-driver.patch index fe8f9fb66b..346a575050 100644 --- a/target/linux/brcm2708/patches-4.19/950-0040-Add-dwc_otg-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0040-Add-dwc_otg-driver.patch @@ -1,7 +1,7 @@ From e30ea17381a5381b1d764da094a56d5cb0c9d636 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Wed, 1 May 2013 19:46:17 +0100 -Subject: [PATCH 040/806] Add dwc_otg driver +Subject: [PATCH] Add dwc_otg driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0041-bcm2708-framebuffer-driver.patch b/target/linux/brcm2708/patches-4.19/950-0041-bcm2708-framebuffer-driver.patch index 7135ff3fcf..f77b3fd8e0 100644 --- a/target/linux/brcm2708/patches-4.19/950-0041-bcm2708-framebuffer-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0041-bcm2708-framebuffer-driver.patch @@ -1,7 +1,7 @@ From 7be9aaefa159fe6e59064e2a90195a63cc88352a Mon Sep 17 00:00:00 2001 From: popcornmix Date: Wed, 17 Jun 2015 17:06:34 +0100 -Subject: [PATCH 041/806] bcm2708 framebuffer driver +Subject: [PATCH] bcm2708 framebuffer driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0042-Speed-up-console-framebuffer-imageblit-function.patch b/target/linux/brcm2708/patches-4.19/950-0042-Speed-up-console-framebuffer-imageblit-function.patch index b404ee5366..17d6137728 100644 --- a/target/linux/brcm2708/patches-4.19/950-0042-Speed-up-console-framebuffer-imageblit-function.patch +++ b/target/linux/brcm2708/patches-4.19/950-0042-Speed-up-console-framebuffer-imageblit-function.patch @@ -1,7 +1,7 @@ From f4489532d7a73ded68e1b8a815a71b0fe25e9e21 Mon Sep 17 00:00:00 2001 From: Harm Hanemaaijer Date: Thu, 20 Jun 2013 20:21:39 +0200 -Subject: [PATCH 042/806] Speed up console framebuffer imageblit function +Subject: [PATCH] Speed up console framebuffer imageblit function Especially on platforms with a slower CPU but a relatively high framebuffer fill bandwidth, like current ARM devices, the existing diff --git a/target/linux/brcm2708/patches-4.19/950-0043-dmaengine-Add-support-for-BCM2708.patch b/target/linux/brcm2708/patches-4.19/950-0043-dmaengine-Add-support-for-BCM2708.patch index c7c1b98b6c..46bcb45e01 100644 --- a/target/linux/brcm2708/patches-4.19/950-0043-dmaengine-Add-support-for-BCM2708.patch +++ b/target/linux/brcm2708/patches-4.19/950-0043-dmaengine-Add-support-for-BCM2708.patch @@ -1,7 +1,7 @@ From 9405d98a5b9ad11e9be2dc1247de3e26896a00d9 Mon Sep 17 00:00:00 2001 From: Florian Meier Date: Fri, 22 Nov 2013 14:22:53 +0100 -Subject: [PATCH 043/806] dmaengine: Add support for BCM2708 +Subject: [PATCH] dmaengine: Add support for BCM2708 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0044-MMC-added-alternative-MMC-driver.patch b/target/linux/brcm2708/patches-4.19/950-0044-MMC-added-alternative-MMC-driver.patch index 3caebb8943..b154d6ee75 100644 --- a/target/linux/brcm2708/patches-4.19/950-0044-MMC-added-alternative-MMC-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0044-MMC-added-alternative-MMC-driver.patch @@ -1,7 +1,7 @@ From 74f3233f6ed4298983348b2ba5a500f955703953 Mon Sep 17 00:00:00 2001 From: gellert Date: Fri, 15 Aug 2014 16:35:06 +0100 -Subject: [PATCH 044/806] MMC: added alternative MMC driver +Subject: [PATCH] MMC: added alternative MMC driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0045-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch b/target/linux/brcm2708/patches-4.19/950-0045-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch index 4ede44e796..b3b73b8073 100644 --- a/target/linux/brcm2708/patches-4.19/950-0045-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch +++ b/target/linux/brcm2708/patches-4.19/950-0045-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch @@ -1,7 +1,7 @@ From 5fcaebde5b5cd58630ea70bbfe0c62f8229469c5 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Wed, 25 Mar 2015 17:49:47 +0000 -Subject: [PATCH 045/806] Adding bcm2835-sdhost driver, and an overlay to +Subject: [PATCH] Adding bcm2835-sdhost driver, and an overlay to enable it BCM2835 has two SD card interfaces. This driver uses the other one. diff --git a/target/linux/brcm2708/patches-4.19/950-0046-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch b/target/linux/brcm2708/patches-4.19/950-0046-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch index a696f57f75..17663b294f 100644 --- a/target/linux/brcm2708/patches-4.19/950-0046-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch +++ b/target/linux/brcm2708/patches-4.19/950-0046-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch @@ -1,7 +1,7 @@ From cfdf39199781b73840dfdfb7d1281b398c1334cf Mon Sep 17 00:00:00 2001 From: popcornmix Date: Fri, 28 Oct 2016 15:36:43 +0100 -Subject: [PATCH 046/806] vc_mem: Add vc_mem driver for querying firmware +Subject: [PATCH] vc_mem: Add vc_mem driver for querying firmware memory addresses MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 diff --git a/target/linux/brcm2708/patches-4.19/950-0047-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch b/target/linux/brcm2708/patches-4.19/950-0047-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch index 5ae45368a9..1916ac6944 100644 --- a/target/linux/brcm2708/patches-4.19/950-0047-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch +++ b/target/linux/brcm2708/patches-4.19/950-0047-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch @@ -1,7 +1,7 @@ From 6f27d1904c3f46e00388b1603ceed359387349d2 Mon Sep 17 00:00:00 2001 From: Tim Gover Date: Tue, 22 Jul 2014 15:41:04 +0100 -Subject: [PATCH 047/806] vcsm: VideoCore shared memory service for BCM2835 +Subject: [PATCH] vcsm: VideoCore shared memory service for BCM2835 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0048-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch b/target/linux/brcm2708/patches-4.19/950-0048-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch index 1760012e3e..6afffd2a16 100644 --- a/target/linux/brcm2708/patches-4.19/950-0048-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch +++ b/target/linux/brcm2708/patches-4.19/950-0048-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch @@ -1,7 +1,7 @@ From cff179ff275e8f7849384ad2876c9a3237eeac79 Mon Sep 17 00:00:00 2001 From: Luke Wren Date: Fri, 21 Aug 2015 23:14:48 +0100 -Subject: [PATCH 048/806] Add /dev/gpiomem device for rootless user GPIO access +Subject: [PATCH] Add /dev/gpiomem device for rootless user GPIO access Signed-off-by: Luke Wren diff --git a/target/linux/brcm2708/patches-4.19/950-0049-Add-SMI-driver.patch b/target/linux/brcm2708/patches-4.19/950-0049-Add-SMI-driver.patch index 73f0b70264..a947f27654 100644 --- a/target/linux/brcm2708/patches-4.19/950-0049-Add-SMI-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0049-Add-SMI-driver.patch @@ -1,7 +1,7 @@ From 9c81a1d5224e50e6ec45b8d0c97026a5dc800853 Mon Sep 17 00:00:00 2001 From: Luke Wren Date: Sat, 5 Sep 2015 01:14:45 +0100 -Subject: [PATCH 049/806] Add SMI driver +Subject: [PATCH] Add SMI driver Signed-off-by: Luke Wren --- diff --git a/target/linux/brcm2708/patches-4.19/950-0050-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch b/target/linux/brcm2708/patches-4.19/950-0050-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch index a1c327459e..c7cb1e6d86 100644 --- a/target/linux/brcm2708/patches-4.19/950-0050-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch +++ b/target/linux/brcm2708/patches-4.19/950-0050-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch @@ -1,7 +1,7 @@ From f7cccb2e66f0187f69a432536f227b32a458f94b Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Tue, 26 Apr 2016 14:59:21 +0000 -Subject: [PATCH 050/806] MISC: bcm2835: smi: use clock manager and fix reload +Subject: [PATCH] MISC: bcm2835: smi: use clock manager and fix reload issues Use clock manager instead of self-made clockmanager. diff --git a/target/linux/brcm2708/patches-4.19/950-0051-Add-SMI-NAND-driver.patch b/target/linux/brcm2708/patches-4.19/950-0051-Add-SMI-NAND-driver.patch index ddcc19d0d6..8688431a11 100644 --- a/target/linux/brcm2708/patches-4.19/950-0051-Add-SMI-NAND-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0051-Add-SMI-NAND-driver.patch @@ -1,7 +1,7 @@ From 06d1fce502f478f7e554c591a68cd42cc861e976 Mon Sep 17 00:00:00 2001 From: Luke Wren Date: Sat, 5 Sep 2015 01:16:10 +0100 -Subject: [PATCH 051/806] Add SMI NAND driver +Subject: [PATCH] Add SMI NAND driver Signed-off-by: Luke Wren --- diff --git a/target/linux/brcm2708/patches-4.19/950-0052-Add-cpufreq-driver.patch b/target/linux/brcm2708/patches-4.19/950-0052-Add-cpufreq-driver.patch index cac3399e6d..b9cf14453c 100644 --- a/target/linux/brcm2708/patches-4.19/950-0052-Add-cpufreq-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0052-Add-cpufreq-driver.patch @@ -1,7 +1,7 @@ From 0a248af6e18d7f1ad57fffa7f588bc8a5851832e Mon Sep 17 00:00:00 2001 From: popcornmix Date: Wed, 3 Jul 2013 00:49:20 +0100 -Subject: [PATCH 052/806] Add cpufreq driver +Subject: [PATCH] Add cpufreq driver Signed-off-by: popcornmix diff --git a/target/linux/brcm2708/patches-4.19/950-0053-Add-Chris-Boot-s-i2c-driver.patch b/target/linux/brcm2708/patches-4.19/950-0053-Add-Chris-Boot-s-i2c-driver.patch index cec00dc330..cf26302f71 100644 --- a/target/linux/brcm2708/patches-4.19/950-0053-Add-Chris-Boot-s-i2c-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0053-Add-Chris-Boot-s-i2c-driver.patch @@ -1,7 +1,7 @@ From 1f72dfe2738305c57605a8192176117e1641779c Mon Sep 17 00:00:00 2001 From: popcornmix Date: Wed, 17 Jun 2015 15:44:08 +0100 -Subject: [PATCH 053/806] Add Chris Boot's i2c driver +Subject: [PATCH] Add Chris Boot's i2c driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0054-char-broadcom-Add-vcio-module.patch b/target/linux/brcm2708/patches-4.19/950-0054-char-broadcom-Add-vcio-module.patch index 6489100d67..e55c04ac2d 100644 --- a/target/linux/brcm2708/patches-4.19/950-0054-char-broadcom-Add-vcio-module.patch +++ b/target/linux/brcm2708/patches-4.19/950-0054-char-broadcom-Add-vcio-module.patch @@ -1,7 +1,7 @@ From 6e169c17c0de4503264186d90aa51639924c6e9c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= Date: Fri, 26 Jun 2015 14:27:06 +0200 -Subject: [PATCH 054/806] char: broadcom: Add vcio module +Subject: [PATCH] char: broadcom: Add vcio module MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0055-firmware-bcm2835-Support-ARCH_BCM270x.patch b/target/linux/brcm2708/patches-4.19/950-0055-firmware-bcm2835-Support-ARCH_BCM270x.patch index a47be248a2..2851cebfb2 100644 --- a/target/linux/brcm2708/patches-4.19/950-0055-firmware-bcm2835-Support-ARCH_BCM270x.patch +++ b/target/linux/brcm2708/patches-4.19/950-0055-firmware-bcm2835-Support-ARCH_BCM270x.patch @@ -1,7 +1,7 @@ From 6f190ee10a1d3276450e6190bb6d75a03040dcef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= Date: Fri, 26 Jun 2015 14:25:01 +0200 -Subject: [PATCH 055/806] firmware: bcm2835: Support ARCH_BCM270x +Subject: [PATCH] firmware: bcm2835: Support ARCH_BCM270x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0056-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch b/target/linux/brcm2708/patches-4.19/950-0056-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch index 6aba53ffdc..e6bb9fa388 100644 --- a/target/linux/brcm2708/patches-4.19/950-0056-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch +++ b/target/linux/brcm2708/patches-4.19/950-0056-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch @@ -1,7 +1,7 @@ From 28951ab97e67b20640b183364d2396e91e8a6148 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Mon, 11 May 2015 09:00:42 +0100 -Subject: [PATCH 056/806] scripts: Add mkknlimg and knlinfo scripts from tools +Subject: [PATCH] scripts: Add mkknlimg and knlinfo scripts from tools repo The Raspberry Pi firmware looks for a trailer on the kernel image to diff --git a/target/linux/brcm2708/patches-4.19/950-0057-BCM2708-Add-core-Device-Tree-support.patch b/target/linux/brcm2708/patches-4.19/950-0057-BCM2708-Add-core-Device-Tree-support.patch index f2ad9710fd..72b9cfc131 100644 --- a/target/linux/brcm2708/patches-4.19/950-0057-BCM2708-Add-core-Device-Tree-support.patch +++ b/target/linux/brcm2708/patches-4.19/950-0057-BCM2708-Add-core-Device-Tree-support.patch @@ -1,7 +1,7 @@ From d04105f6d48f160f4b7ab874ed7f878c2b84b466 Mon Sep 17 00:00:00 2001 From: notro Date: Wed, 9 Jul 2014 14:46:08 +0200 -Subject: [PATCH 057/806] BCM2708: Add core Device Tree support +Subject: [PATCH] BCM2708: Add core Device Tree support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit diff --git a/target/linux/brcm2708/patches-4.19/950-0058-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch b/target/linux/brcm2708/patches-4.19/950-0058-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch index 6eb9b54ed9..b3839f6ad7 100644 --- a/target/linux/brcm2708/patches-4.19/950-0058-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch +++ b/target/linux/brcm2708/patches-4.19/950-0058-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch @@ -1,7 +1,7 @@ From 7181db1685aa67e127f80fe9607270d3c87aa3b9 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 6 Feb 2015 13:50:57 +0000 -Subject: [PATCH 058/806] BCM270x_DT: Add pwr_led, and the required "input" +Subject: [PATCH] BCM270x_DT: Add pwr_led, and the required "input" trigger The "input" trigger makes the associated GPIO an input. This is to support diff --git a/target/linux/brcm2708/patches-4.19/950-0059-fbdev-add-FBIOCOPYAREA-ioctl.patch b/target/linux/brcm2708/patches-4.19/950-0059-fbdev-add-FBIOCOPYAREA-ioctl.patch index 5a3f910429..16c15d59f2 100644 --- a/target/linux/brcm2708/patches-4.19/950-0059-fbdev-add-FBIOCOPYAREA-ioctl.patch +++ b/target/linux/brcm2708/patches-4.19/950-0059-fbdev-add-FBIOCOPYAREA-ioctl.patch @@ -1,7 +1,7 @@ From 5269119dadfc6874aec51fed4468c73f1b0187a2 Mon Sep 17 00:00:00 2001 From: Siarhei Siamashka Date: Mon, 17 Jun 2013 13:32:11 +0300 -Subject: [PATCH 059/806] fbdev: add FBIOCOPYAREA ioctl +Subject: [PATCH] fbdev: add FBIOCOPYAREA ioctl Based on the patch authored by Ali Gholami Rudi at https://lkml.org/lkml/2009/7/13/153 diff --git a/target/linux/brcm2708/patches-4.19/950-0060-Added-Device-IDs-for-August-DVB-T-205.patch b/target/linux/brcm2708/patches-4.19/950-0060-Added-Device-IDs-for-August-DVB-T-205.patch index ec8489a108..409b289416 100644 --- a/target/linux/brcm2708/patches-4.19/950-0060-Added-Device-IDs-for-August-DVB-T-205.patch +++ b/target/linux/brcm2708/patches-4.19/950-0060-Added-Device-IDs-for-August-DVB-T-205.patch @@ -1,7 +1,7 @@ From 298368d476283829d222cb974491ac313605ed69 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Wed, 3 Jul 2013 00:54:08 +0100 -Subject: [PATCH 060/806] Added Device IDs for August DVB-T 205 +Subject: [PATCH] Added Device IDs for August DVB-T 205 --- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 4 ++++ diff --git a/target/linux/brcm2708/patches-4.19/950-0061-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch b/target/linux/brcm2708/patches-4.19/950-0061-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch index fdea2ab19f..6f7b31e4d0 100644 --- a/target/linux/brcm2708/patches-4.19/950-0061-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch +++ b/target/linux/brcm2708/patches-4.19/950-0061-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch @@ -1,7 +1,7 @@ From 8137201823bd2ed1b3951220f29fdc9555c3c6de Mon Sep 17 00:00:00 2001 From: Gordon Hollingworth Date: Tue, 12 May 2015 14:47:56 +0100 -Subject: [PATCH 061/806] rpi-ft5406: Add touchscreen driver for pi LCD display +Subject: [PATCH] rpi-ft5406: Add touchscreen driver for pi LCD display Fix driver detection failure Check that the buffer response is non-zero meaning the touchscreen was detected diff --git a/target/linux/brcm2708/patches-4.19/950-0062-Improve-__copy_to_user-and-__copy_from_user-performa.patch b/target/linux/brcm2708/patches-4.19/950-0062-Improve-__copy_to_user-and-__copy_from_user-performa.patch index 4335ff9560..430059cddf 100644 --- a/target/linux/brcm2708/patches-4.19/950-0062-Improve-__copy_to_user-and-__copy_from_user-performa.patch +++ b/target/linux/brcm2708/patches-4.19/950-0062-Improve-__copy_to_user-and-__copy_from_user-performa.patch @@ -1,7 +1,7 @@ From e4d81adf1f2c84b229901cddb403d00010524b28 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Mon, 28 Nov 2016 16:50:04 +0000 -Subject: [PATCH 062/806] Improve __copy_to_user and __copy_from_user +Subject: [PATCH] Improve __copy_to_user and __copy_from_user performance Provide a __copy_from_user that uses memcpy. On BCM2708, use diff --git a/target/linux/brcm2708/patches-4.19/950-0063-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch b/target/linux/brcm2708/patches-4.19/950-0063-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch index 60f4066d50..0278156959 100644 --- a/target/linux/brcm2708/patches-4.19/950-0063-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch +++ b/target/linux/brcm2708/patches-4.19/950-0063-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch @@ -1,7 +1,7 @@ From 84cd61bdf5fe5ecf70ad88e60e07879cbde2d4a6 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 25 Jun 2015 12:16:11 +0100 -Subject: [PATCH 063/806] gpio-poweroff: Allow it to work on Raspberry Pi +Subject: [PATCH] gpio-poweroff: Allow it to work on Raspberry Pi The Raspberry Pi firmware manages the power-down and reboot process. To do this it installs a pm_power_off handler, causing diff --git a/target/linux/brcm2708/patches-4.19/950-0064-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch b/target/linux/brcm2708/patches-4.19/950-0064-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch index 1a8ab6c44e..a6d04a90b5 100644 --- a/target/linux/brcm2708/patches-4.19/950-0064-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0064-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch @@ -1,7 +1,7 @@ From 0d63b8a00c925eb02093e9ed4866c4a0d9209a00 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Tue, 14 Jul 2015 14:32:47 +0100 -Subject: [PATCH 064/806] mfd: Add Raspberry Pi Sense HAT core driver +Subject: [PATCH] mfd: Add Raspberry Pi Sense HAT core driver --- drivers/input/joystick/Kconfig | 8 + diff --git a/target/linux/brcm2708/patches-4.19/950-0065-ASoC-pcm512x-implement-set_tdm_slot-interface.patch b/target/linux/brcm2708/patches-4.19/950-0065-ASoC-pcm512x-implement-set_tdm_slot-interface.patch index 36284a6b98..e656c05a55 100644 --- a/target/linux/brcm2708/patches-4.19/950-0065-ASoC-pcm512x-implement-set_tdm_slot-interface.patch +++ b/target/linux/brcm2708/patches-4.19/950-0065-ASoC-pcm512x-implement-set_tdm_slot-interface.patch @@ -1,7 +1,7 @@ From 5fd7bb26ef791a7da1c0573b980ab4fe6b9c2641 Mon Sep 17 00:00:00 2001 From: Matthias Reichl Date: Thu, 22 Feb 2018 11:55:06 +0100 -Subject: [PATCH 065/806] ASoC: pcm512x: implement set_tdm_slot interface +Subject: [PATCH] ASoC: pcm512x: implement set_tdm_slot interface PCM512x can accept data padded with additional BCLK cycles but the driver currently lacks an interface to configure this. diff --git a/target/linux/brcm2708/patches-4.19/950-0066-ASoC-Add-support-for-Rpi-DAC.patch b/target/linux/brcm2708/patches-4.19/950-0066-ASoC-Add-support-for-Rpi-DAC.patch index fcabe55f80..6eab0b5944 100644 --- a/target/linux/brcm2708/patches-4.19/950-0066-ASoC-Add-support-for-Rpi-DAC.patch +++ b/target/linux/brcm2708/patches-4.19/950-0066-ASoC-Add-support-for-Rpi-DAC.patch @@ -1,7 +1,7 @@ From 13ddc845b271d7cc79bcbdd288f95c03ea927b89 Mon Sep 17 00:00:00 2001 From: Florian Meier Date: Mon, 25 Jan 2016 15:48:59 +0000 -Subject: [PATCH 066/806] ASoC: Add support for Rpi-DAC +Subject: [PATCH] ASoC: Add support for Rpi-DAC --- sound/soc/codecs/Kconfig | 5 +++ diff --git a/target/linux/brcm2708/patches-4.19/950-0067-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch b/target/linux/brcm2708/patches-4.19/950-0067-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch index 88aa003849..eb21558df6 100644 --- a/target/linux/brcm2708/patches-4.19/950-0067-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch +++ b/target/linux/brcm2708/patches-4.19/950-0067-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch @@ -1,7 +1,7 @@ From 76c252645ad542bd35ce52230635f36e3c0f730d Mon Sep 17 00:00:00 2001 From: Gordon Garrity Date: Sat, 8 Mar 2014 16:56:57 +0000 -Subject: [PATCH 067/806] Add IQaudIO Sound Card support for Raspberry Pi +Subject: [PATCH] Add IQaudIO Sound Card support for Raspberry Pi Set a limit of 0dB on Digital Volume Control diff --git a/target/linux/brcm2708/patches-4.19/950-0068-Added-support-for-HiFiBerry-DAC.patch b/target/linux/brcm2708/patches-4.19/950-0068-Added-support-for-HiFiBerry-DAC.patch index f54ea259a8..a335e2dcba 100644 --- a/target/linux/brcm2708/patches-4.19/950-0068-Added-support-for-HiFiBerry-DAC.patch +++ b/target/linux/brcm2708/patches-4.19/950-0068-Added-support-for-HiFiBerry-DAC.patch @@ -1,7 +1,7 @@ From 86d09076abd36ad87477c21f7b33c90cb696e196 Mon Sep 17 00:00:00 2001 From: Daniel Matuschek Date: Mon, 4 Aug 2014 10:06:56 +0200 -Subject: [PATCH 068/806] Added support for HiFiBerry DAC+ +Subject: [PATCH] Added support for HiFiBerry DAC+ The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses a different codec chip (PCM5122), therefore a new driver is necessary. diff --git a/target/linux/brcm2708/patches-4.19/950-0069-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch b/target/linux/brcm2708/patches-4.19/950-0069-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch index 22dbd89a8b..edb1703200 100644 --- a/target/linux/brcm2708/patches-4.19/950-0069-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch +++ b/target/linux/brcm2708/patches-4.19/950-0069-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch @@ -1,7 +1,7 @@ From a1344150b31e3b9592f76df8f453a15565a8390a Mon Sep 17 00:00:00 2001 From: Daniel Matuschek Date: Mon, 4 Aug 2014 11:09:58 +0200 -Subject: [PATCH 069/806] Added driver for HiFiBerry Amp amplifier add-on board +Subject: [PATCH] Added driver for HiFiBerry Amp amplifier add-on board The driver contains a low-level hardware driver for the TAS5713 and the drivers for the Raspberry Pi I2S subsystem. diff --git a/target/linux/brcm2708/patches-4.19/950-0070-Add-driver-for-rpi-proto.patch b/target/linux/brcm2708/patches-4.19/950-0070-Add-driver-for-rpi-proto.patch index 0741db969a..0cfe2583b3 100644 --- a/target/linux/brcm2708/patches-4.19/950-0070-Add-driver-for-rpi-proto.patch +++ b/target/linux/brcm2708/patches-4.19/950-0070-Add-driver-for-rpi-proto.patch @@ -1,7 +1,7 @@ From bf4dee727fc7c72e250784e8e3e681f9d11bbdc1 Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Wed, 25 Mar 2015 09:26:17 +0100 -Subject: [PATCH 070/806] Add driver for rpi-proto +Subject: [PATCH] Add driver for rpi-proto Forward port of 3.10.x driver from https://github.com/koalo We are using a custom board and would like to use rpi 3.18.x diff --git a/target/linux/brcm2708/patches-4.19/950-0071-Add-Support-for-JustBoom-Audio-boards.patch b/target/linux/brcm2708/patches-4.19/950-0071-Add-Support-for-JustBoom-Audio-boards.patch index b34d195c5c..68957f35db 100644 --- a/target/linux/brcm2708/patches-4.19/950-0071-Add-Support-for-JustBoom-Audio-boards.patch +++ b/target/linux/brcm2708/patches-4.19/950-0071-Add-Support-for-JustBoom-Audio-boards.patch @@ -1,7 +1,7 @@ From 0435c03e212129e384cd49b19fca7a55dbf1ec50 Mon Sep 17 00:00:00 2001 From: Aaron Shaw Date: Thu, 7 Apr 2016 21:26:21 +0100 -Subject: [PATCH 071/806] Add Support for JustBoom Audio boards +Subject: [PATCH] Add Support for JustBoom Audio boards justboom-dac: Adjust for ALSA API change diff --git a/target/linux/brcm2708/patches-4.19/950-0072-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch b/target/linux/brcm2708/patches-4.19/950-0072-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch index 68118a175c..b4a67473dc 100644 --- a/target/linux/brcm2708/patches-4.19/950-0072-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch +++ b/target/linux/brcm2708/patches-4.19/950-0072-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch @@ -1,7 +1,7 @@ From 3f06b2f7c04d263a3bb0569e6f2c341549c21154 Mon Sep 17 00:00:00 2001 From: Matt Flax Date: Mon, 16 May 2016 21:36:31 +1000 -Subject: [PATCH 072/806] New AudioInjector.net Pi soundcard with low jitter +Subject: [PATCH] New AudioInjector.net Pi soundcard with low jitter audio in and out. Contains the sound/soc/bcm ALSA machine driver and necessary alterations to the Kconfig and Makefile. diff --git a/target/linux/brcm2708/patches-4.19/950-0073-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch b/target/linux/brcm2708/patches-4.19/950-0073-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch index ecca124177..1316727f46 100644 --- a/target/linux/brcm2708/patches-4.19/950-0073-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch +++ b/target/linux/brcm2708/patches-4.19/950-0073-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch @@ -1,7 +1,7 @@ From 13efe81b4ab9321290d6973e90d00b7caf37b47f Mon Sep 17 00:00:00 2001 From: escalator2015 Date: Tue, 24 May 2016 16:20:09 +0100 -Subject: [PATCH 073/806] New driver for RRA DigiDAC1 soundcard using WM8741 + +Subject: [PATCH] New driver for RRA DigiDAC1 soundcard using WM8741 + WM8804 --- diff --git a/target/linux/brcm2708/patches-4.19/950-0074-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch b/target/linux/brcm2708/patches-4.19/950-0074-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch index fdd54193d8..de72049435 100644 --- a/target/linux/brcm2708/patches-4.19/950-0074-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch +++ b/target/linux/brcm2708/patches-4.19/950-0074-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch @@ -1,7 +1,7 @@ From 234b6a3cfd5bc1fb341c01f8ac773956f5af42cd Mon Sep 17 00:00:00 2001 From: DigitalDreamtime Date: Sat, 2 Jul 2016 16:26:19 +0100 -Subject: [PATCH 074/806] Add support for Dion Audio LOCO DAC-AMP HAT +Subject: [PATCH] Add support for Dion Audio LOCO DAC-AMP HAT Using dedicated machine driver and pcm5102a codec driver. diff --git a/target/linux/brcm2708/patches-4.19/950-0075-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch b/target/linux/brcm2708/patches-4.19/950-0075-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch index 0a6228e685..fa1d346702 100644 --- a/target/linux/brcm2708/patches-4.19/950-0075-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch +++ b/target/linux/brcm2708/patches-4.19/950-0075-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch @@ -1,7 +1,7 @@ From 4c4b1a565322382b927927d6066735c7cd1ea188 Mon Sep 17 00:00:00 2001 From: Clive Messer Date: Mon, 19 Sep 2016 14:01:04 +0100 -Subject: [PATCH 075/806] Allo Piano DAC boards: Initial 2 channel (stereo) +Subject: [PATCH] Allo Piano DAC boards: Initial 2 channel (stereo) support (#1645) Add initial 2 channel (stereo) support for Allo Piano DAC (2.0/2.1) boards, diff --git a/target/linux/brcm2708/patches-4.19/950-0076-Add-support-for-Allo-Piano-DAC-2.1-plus-add-on-board.patch b/target/linux/brcm2708/patches-4.19/950-0076-Add-support-for-Allo-Piano-DAC-2.1-plus-add-on-board.patch index c940d4dc40..0c7e218fc3 100644 --- a/target/linux/brcm2708/patches-4.19/950-0076-Add-support-for-Allo-Piano-DAC-2.1-plus-add-on-board.patch +++ b/target/linux/brcm2708/patches-4.19/950-0076-Add-support-for-Allo-Piano-DAC-2.1-plus-add-on-board.patch @@ -1,7 +1,7 @@ From 7603d4cf7fb47afc19641b518250ee52852470f6 Mon Sep 17 00:00:00 2001 From: Raashid Muhammed Date: Mon, 27 Mar 2017 12:35:00 +0530 -Subject: [PATCH 076/806] Add support for Allo Piano DAC 2.1 plus add-on board +Subject: [PATCH] Add support for Allo Piano DAC 2.1 plus add-on board for Raspberry Pi. The Piano DAC 2.1 has support for 4 channels with subwoofer. diff --git a/target/linux/brcm2708/patches-4.19/950-0077-Add-support-for-Allo-Boss-DAC-add-on-board-for-Raspb.patch b/target/linux/brcm2708/patches-4.19/950-0077-Add-support-for-Allo-Boss-DAC-add-on-board-for-Raspb.patch index f2a5997c30..9b0750f24b 100644 --- a/target/linux/brcm2708/patches-4.19/950-0077-Add-support-for-Allo-Boss-DAC-add-on-board-for-Raspb.patch +++ b/target/linux/brcm2708/patches-4.19/950-0077-Add-support-for-Allo-Boss-DAC-add-on-board-for-Raspb.patch @@ -1,7 +1,7 @@ From 77dce745cd500cbe65e4cbb613c27c23e26f5bbb Mon Sep 17 00:00:00 2001 From: BabuSubashChandar Date: Tue, 28 Mar 2017 20:04:42 +0530 -Subject: [PATCH 077/806] Add support for Allo Boss DAC add-on board for +Subject: [PATCH] Add support for Allo Boss DAC add-on board for Raspberry Pi. (#1924) Signed-off-by: Baswaraj K diff --git a/target/linux/brcm2708/patches-4.19/950-0078-Support-for-Blokas-Labs-pisound-board.patch b/target/linux/brcm2708/patches-4.19/950-0078-Support-for-Blokas-Labs-pisound-board.patch index c996ea395d..5e9e34b73e 100644 --- a/target/linux/brcm2708/patches-4.19/950-0078-Support-for-Blokas-Labs-pisound-board.patch +++ b/target/linux/brcm2708/patches-4.19/950-0078-Support-for-Blokas-Labs-pisound-board.patch @@ -1,7 +1,7 @@ From 85ef9efcc598bff1d783620e23c09aed873e7aee Mon Sep 17 00:00:00 2001 From: gtrainavicius Date: Sun, 23 Oct 2016 12:06:53 +0300 -Subject: [PATCH 078/806] Support for Blokas Labs pisound board +Subject: [PATCH] Support for Blokas Labs pisound board Pisound dynamic overlay (#1760) diff --git a/target/linux/brcm2708/patches-4.19/950-0079-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch b/target/linux/brcm2708/patches-4.19/950-0079-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch index 2ee7690e7f..363fd90df2 100644 --- a/target/linux/brcm2708/patches-4.19/950-0079-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch +++ b/target/linux/brcm2708/patches-4.19/950-0079-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch @@ -1,7 +1,7 @@ From 2c3e4f06b7e7d34a03e747367c26805fbf89a4ac Mon Sep 17 00:00:00 2001 From: Matthias Reichl Date: Sun, 22 Jan 2017 12:49:37 +0100 -Subject: [PATCH 079/806] ASoC: Add driver for Cirrus Logic Audio Card +Subject: [PATCH] ASoC: Add driver for Cirrus Logic Audio Card Note: due to problems with deferred probing of regulators the following softdep should be added to a modprobe.d file diff --git a/target/linux/brcm2708/patches-4.19/950-0080-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch b/target/linux/brcm2708/patches-4.19/950-0080-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch index 1eb9e539ec..046fe436bc 100644 --- a/target/linux/brcm2708/patches-4.19/950-0080-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch +++ b/target/linux/brcm2708/patches-4.19/950-0080-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch @@ -1,7 +1,7 @@ From 858a3bbbf274ffcecca558f66aaab146c11fdfe9 Mon Sep 17 00:00:00 2001 From: Miquel Date: Fri, 24 Feb 2017 20:51:06 +0100 -Subject: [PATCH 080/806] sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT +Subject: [PATCH] sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT Signed-off-by: Miquel Blauw diff --git a/target/linux/brcm2708/patches-4.19/950-0081-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch b/target/linux/brcm2708/patches-4.19/950-0081-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch index 3f913d9193..4d5c4a747a 100644 --- a/target/linux/brcm2708/patches-4.19/950-0081-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch +++ b/target/linux/brcm2708/patches-4.19/950-0081-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch @@ -1,7 +1,7 @@ From 8ed265197d7a8f9c1a328d262bfe91050716ad76 Mon Sep 17 00:00:00 2001 From: Fe-Pi Date: Wed, 1 Mar 2017 04:42:43 -0700 -Subject: [PATCH 081/806] Add support for Fe-Pi audio sound card. (#1867) +Subject: [PATCH] Add support for Fe-Pi audio sound card. (#1867) Fe-Pi Audio Sound Card is based on NXP SGTL5000 codec. Mechanical specification of the board is the same the Raspberry Pi Zero. diff --git a/target/linux/brcm2708/patches-4.19/950-0082-Add-support-for-the-AudioInjector.net-Octo-sound-car.patch b/target/linux/brcm2708/patches-4.19/950-0082-Add-support-for-the-AudioInjector.net-Octo-sound-car.patch index f6bc9e2a2b..36784e9b41 100644 --- a/target/linux/brcm2708/patches-4.19/950-0082-Add-support-for-the-AudioInjector.net-Octo-sound-car.patch +++ b/target/linux/brcm2708/patches-4.19/950-0082-Add-support-for-the-AudioInjector.net-Octo-sound-car.patch @@ -1,7 +1,7 @@ From 846864bceccdafbed86c1b1766500861547b0da9 Mon Sep 17 00:00:00 2001 From: Matt Flax Date: Wed, 8 Mar 2017 20:04:13 +1100 -Subject: [PATCH 082/806] Add support for the AudioInjector.net Octo sound card +Subject: [PATCH] Add support for the AudioInjector.net Octo sound card AudioInjector Octo: sample rates, regulators, reset diff --git a/target/linux/brcm2708/patches-4.19/950-0083-Driver-support-for-Google-voiceHAT-soundcard.patch b/target/linux/brcm2708/patches-4.19/950-0083-Driver-support-for-Google-voiceHAT-soundcard.patch index 23abeca917..a9605818c9 100644 --- a/target/linux/brcm2708/patches-4.19/950-0083-Driver-support-for-Google-voiceHAT-soundcard.patch +++ b/target/linux/brcm2708/patches-4.19/950-0083-Driver-support-for-Google-voiceHAT-soundcard.patch @@ -1,7 +1,7 @@ From ae0077658c007643020b88e233150cf1eca6cea8 Mon Sep 17 00:00:00 2001 From: Peter Malkin Date: Mon, 27 Mar 2017 16:38:21 -0700 -Subject: [PATCH 083/806] Driver support for Google voiceHAT soundcard. +Subject: [PATCH] Driver support for Google voiceHAT soundcard. ASoC: googlevoicehat-codec: Use correct device when grabbing GPIO diff --git a/target/linux/brcm2708/patches-4.19/950-0084-Driver-and-overlay-for-Allo-Katana-DAC.patch b/target/linux/brcm2708/patches-4.19/950-0084-Driver-and-overlay-for-Allo-Katana-DAC.patch index 7a12e7e4d9..d742e6d988 100644 --- a/target/linux/brcm2708/patches-4.19/950-0084-Driver-and-overlay-for-Allo-Katana-DAC.patch +++ b/target/linux/brcm2708/patches-4.19/950-0084-Driver-and-overlay-for-Allo-Katana-DAC.patch @@ -1,7 +1,7 @@ From e37c55733587a312181a12a8f15b8f35497c828e Mon Sep 17 00:00:00 2001 From: allocom Date: Thu, 19 Apr 2018 12:12:26 +0530 -Subject: [PATCH 084/806] Driver and overlay for Allo Katana DAC +Subject: [PATCH] Driver and overlay for Allo Katana DAC Allo Katana DAC: Updated default values diff --git a/target/linux/brcm2708/patches-4.19/950-0085-ASoC-wm8804-MCLK-configuration-options-32-bit.patch b/target/linux/brcm2708/patches-4.19/950-0085-ASoC-wm8804-MCLK-configuration-options-32-bit.patch index 5eca1abe85..9c4462c1b4 100644 --- a/target/linux/brcm2708/patches-4.19/950-0085-ASoC-wm8804-MCLK-configuration-options-32-bit.patch +++ b/target/linux/brcm2708/patches-4.19/950-0085-ASoC-wm8804-MCLK-configuration-options-32-bit.patch @@ -1,7 +1,7 @@ From f77d4bf8ea9217d57be6982a6fdfa9f5f9c9b927 Mon Sep 17 00:00:00 2001 From: Daniel Matuschek Date: Wed, 15 Jan 2014 21:41:23 +0100 -Subject: [PATCH 085/806] ASoC: wm8804: MCLK configuration options, 32-bit +Subject: [PATCH] ASoC: wm8804: MCLK configuration options, 32-bit WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample rates. At 192kHz only 128xfs is supported. The existing driver selects diff --git a/target/linux/brcm2708/patches-4.19/950-0086-ASoC-Add-generic-RPI-driver-for-simple-soundcards.patch b/target/linux/brcm2708/patches-4.19/950-0086-ASoC-Add-generic-RPI-driver-for-simple-soundcards.patch index a609782901..ea2c91164f 100644 --- a/target/linux/brcm2708/patches-4.19/950-0086-ASoC-Add-generic-RPI-driver-for-simple-soundcards.patch +++ b/target/linux/brcm2708/patches-4.19/950-0086-ASoC-Add-generic-RPI-driver-for-simple-soundcards.patch @@ -1,7 +1,7 @@ From 8cf85a58066800ed638b4e4fca6f704275e0f588 Mon Sep 17 00:00:00 2001 From: Tim Gover Date: Wed, 27 Jun 2018 15:59:12 +0100 -Subject: [PATCH 086/806] ASoC: Add generic RPI driver for simple soundcards. +Subject: [PATCH] ASoC: Add generic RPI driver for simple soundcards. The RPI simple sound card driver provides a generic ALSA SOC card driver supporting a variety of Pi HAT soundcards. The intention is to avoid diff --git a/target/linux/brcm2708/patches-4.19/950-0087-ASoC-Add-Kconfig-and-Makefile-for-sound-soc-bcm.patch b/target/linux/brcm2708/patches-4.19/950-0087-ASoC-Add-Kconfig-and-Makefile-for-sound-soc-bcm.patch index 6b0ffe038f..db8af937b7 100644 --- a/target/linux/brcm2708/patches-4.19/950-0087-ASoC-Add-Kconfig-and-Makefile-for-sound-soc-bcm.patch +++ b/target/linux/brcm2708/patches-4.19/950-0087-ASoC-Add-Kconfig-and-Makefile-for-sound-soc-bcm.patch @@ -1,7 +1,7 @@ From 42dfc383b7d7100350c357b0381a2800b5bf3c27 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Mon, 3 Sep 2018 17:00:36 +0100 -Subject: [PATCH 087/806] ASoC: Add Kconfig and Makefile for sound/soc/bcm +Subject: [PATCH] ASoC: Add Kconfig and Makefile for sound/soc/bcm Signed-off-by: popcornmix --- diff --git a/target/linux/brcm2708/patches-4.19/950-0088-ASoC-Create-a-generic-Pi-Hat-WM8804-driver.patch b/target/linux/brcm2708/patches-4.19/950-0088-ASoC-Create-a-generic-Pi-Hat-WM8804-driver.patch index 0a8d1de940..1ba0b774b4 100644 --- a/target/linux/brcm2708/patches-4.19/950-0088-ASoC-Create-a-generic-Pi-Hat-WM8804-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0088-ASoC-Create-a-generic-Pi-Hat-WM8804-driver.patch @@ -1,7 +1,7 @@ From 6af5a0adda5b782ad2e134b405ca168895c89b0c Mon Sep 17 00:00:00 2001 From: Tim Gover Date: Sat, 21 Jul 2018 20:07:46 +0100 -Subject: [PATCH 088/806] ASoC: Create a generic Pi Hat WM8804 driver +Subject: [PATCH] ASoC: Create a generic Pi Hat WM8804 driver Reduce the amount of duplicated code by creating a generic driver for Pi Hat digi cards using the WM8804 codec. diff --git a/target/linux/brcm2708/patches-4.19/950-0089-rpi_display-add-backlight-driver-and-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0089-rpi_display-add-backlight-driver-and-overlay.patch index f790af77be..f3c06f4fff 100644 --- a/target/linux/brcm2708/patches-4.19/950-0089-rpi_display-add-backlight-driver-and-overlay.patch +++ b/target/linux/brcm2708/patches-4.19/950-0089-rpi_display-add-backlight-driver-and-overlay.patch @@ -1,7 +1,7 @@ From 5dcbf6d1aa6e33987082e9c8ac64e74f7b6bad58 Mon Sep 17 00:00:00 2001 From: P33M Date: Wed, 21 Oct 2015 14:55:21 +0100 -Subject: [PATCH 089/806] rpi_display: add backlight driver and overlay +Subject: [PATCH] rpi_display: add backlight driver and overlay Add a mailbox-driven backlight controller for the Raspberry Pi DSI touchscreen display. Requires updated GPU firmware to recognise the diff --git a/target/linux/brcm2708/patches-4.19/950-0090-bcm2835-virtgpio-Virtual-GPIO-driver.patch b/target/linux/brcm2708/patches-4.19/950-0090-bcm2835-virtgpio-Virtual-GPIO-driver.patch index af8d219530..6259fdc101 100644 --- a/target/linux/brcm2708/patches-4.19/950-0090-bcm2835-virtgpio-Virtual-GPIO-driver.patch +++ b/target/linux/brcm2708/patches-4.19/950-0090-bcm2835-virtgpio-Virtual-GPIO-driver.patch @@ -1,7 +1,7 @@ From 0f05af4c96c0272bb431ace33dd284a891e4fe41 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Tue, 23 Feb 2016 19:56:04 +0000 -Subject: [PATCH 090/806] bcm2835-virtgpio: Virtual GPIO driver +Subject: [PATCH] bcm2835-virtgpio: Virtual GPIO driver Add a virtual GPIO driver that uses the firmware mailbox interface to request that the VPU toggles LEDs. diff --git a/target/linux/brcm2708/patches-4.19/950-0091-OF-DT-Overlay-configfs-interface.patch b/target/linux/brcm2708/patches-4.19/950-0091-OF-DT-Overlay-configfs-interface.patch new file mode 100644 index 0000000000..e3caf880ea --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0091-OF-DT-Overlay-configfs-interface.patch @@ -0,0 +1,427 @@ +From dc0f4681729e9bfe506ab8b15852363cb59bdaf5 Mon Sep 17 00:00:00 2001 +From: Pantelis Antoniou +Date: Wed, 3 Dec 2014 13:23:28 +0200 +Subject: [PATCH] OF: DT-Overlay configfs interface + +This is a port of Pantelis Antoniou's v3 port that makes use of the +new upstreamed configfs support for binary attributes. + +Original commit message: + +Add a runtime interface to using configfs for generic device tree overlay +usage. With it its possible to use device tree overlays without having +to use a per-platform overlay manager. + +Please see Documentation/devicetree/configfs-overlays.txt for more info. + +Changes since v2: +- Removed ifdef CONFIG_OF_OVERLAY (since for now it's required) +- Created a documentation entry +- Slight rewording in Kconfig + +Changes since v1: +- of_resolve() -> of_resolve_phandles(). + +Originally-signed-off-by: Pantelis Antoniou +Signed-off-by: Phil Elwell + +DT configfs: Fix build errors on other platforms + +Signed-off-by: Phil Elwell + +DT configfs: fix build error + +There is an error when compiling rpi-4.6.y branch: + CC drivers/of/configfs.o +drivers/of/configfs.c:291:21: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] + .default_groups = of_cfs_def_groups, + ^ +drivers/of/configfs.c:291:21: note: (near initialization for 'of_cfs_subsys.su_group.default_groups.next') + +The .default_groups is linked list since commit +1ae1602de028acaa42a0f6ff18d19756f8e825c6. +This commit uses configfs_add_default_group to fix this problem. + +Signed-off-by: Slawomir Stepien + +configfs: New of_overlay API +--- + .../devicetree/configfs-overlays.txt | 31 ++ + drivers/of/Kconfig | 7 + + drivers/of/Makefile | 1 + + drivers/of/configfs.c | 310 ++++++++++++++++++ + 4 files changed, 349 insertions(+) + create mode 100644 Documentation/devicetree/configfs-overlays.txt + create mode 100644 drivers/of/configfs.c + +--- /dev/null ++++ b/Documentation/devicetree/configfs-overlays.txt +@@ -0,0 +1,31 @@ ++Howto use the configfs overlay interface. ++ ++A device-tree configfs entry is created in /config/device-tree/overlays ++and and it is manipulated using standard file system I/O. ++Note that this is a debug level interface, for use by developers and ++not necessarily something accessed by normal users due to the ++security implications of having direct access to the kernel's device tree. ++ ++* To create an overlay you mkdir the directory: ++ ++ # mkdir /config/device-tree/overlays/foo ++ ++* Either you echo the overlay firmware file to the path property file. ++ ++ # echo foo.dtbo >/config/device-tree/overlays/foo/path ++ ++* Or you cat the contents of the overlay to the dtbo file ++ ++ # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo ++ ++The overlay file will be applied, and devices will be created/destroyed ++as required. ++ ++To remove it simply rmdir the directory. ++ ++ # rmdir /config/device-tree/overlays/foo ++ ++The rationalle of the dual interface (firmware & direct copy) is that each is ++better suited to different use patterns. The firmware interface is what's ++intended to be used by hardware managers in the kernel, while the copy interface ++make sense for developers (since it avoids problems with namespaces). +--- a/drivers/of/Kconfig ++++ b/drivers/of/Kconfig +@@ -104,4 +104,11 @@ config OF_OVERLAY + config OF_NUMA + bool + ++config OF_CONFIGFS ++ bool "Device Tree Overlay ConfigFS interface" ++ select CONFIGFS_FS ++ select OF_OVERLAY ++ help ++ Enable a simple user-space driven DT overlay interface. ++ + endif # OF +--- a/drivers/of/Makefile ++++ b/drivers/of/Makefile +@@ -1,6 +1,7 @@ + # SPDX-License-Identifier: GPL-2.0 + obj-y = base.o device.o platform.o property.o + obj-$(CONFIG_OF_KOBJ) += kobj.o ++obj-$(CONFIG_OF_CONFIGFS) += configfs.o + obj-$(CONFIG_OF_DYNAMIC) += dynamic.o + obj-$(CONFIG_OF_FLATTREE) += fdt.o + obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o +--- /dev/null ++++ b/drivers/of/configfs.c +@@ -0,0 +1,310 @@ ++/* ++ * Configfs entries for device-tree ++ * ++ * Copyright (C) 2013 - Pantelis Antoniou ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "of_private.h" ++ ++struct cfs_overlay_item { ++ struct config_item item; ++ ++ char path[PATH_MAX]; ++ ++ const struct firmware *fw; ++ struct device_node *overlay; ++ int ov_id; ++ ++ void *dtbo; ++ int dtbo_size; ++}; ++ ++static int create_overlay(struct cfs_overlay_item *overlay, void *blob) ++{ ++ int err; ++ ++ /* unflatten the tree */ ++ of_fdt_unflatten_tree(blob, NULL, &overlay->overlay); ++ if (overlay->overlay == NULL) { ++ pr_err("%s: failed to unflatten tree\n", __func__); ++ err = -EINVAL; ++ goto out_err; ++ } ++ pr_debug("%s: unflattened OK\n", __func__); ++ ++ /* mark it as detached */ ++ of_node_set_flag(overlay->overlay, OF_DETACHED); ++ ++ /* perform resolution */ ++ err = of_resolve_phandles(overlay->overlay); ++ if (err != 0) { ++ pr_err("%s: Failed to resolve tree\n", __func__); ++ goto out_err; ++ } ++ pr_debug("%s: resolved OK\n", __func__); ++ ++ err = of_overlay_apply(overlay->overlay, &overlay->ov_id); ++ if (err < 0) { ++ pr_err("%s: Failed to create overlay (err=%d)\n", ++ __func__, err); ++ goto out_err; ++ } ++ ++out_err: ++ return err; ++} ++ ++static inline struct cfs_overlay_item *to_cfs_overlay_item( ++ struct config_item *item) ++{ ++ return item ? container_of(item, struct cfs_overlay_item, item) : NULL; ++} ++ ++static ssize_t cfs_overlay_item_path_show(struct config_item *item, ++ char *page) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ return sprintf(page, "%s\n", overlay->path); ++} ++ ++static ssize_t cfs_overlay_item_path_store(struct config_item *item, ++ const char *page, size_t count) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ const char *p = page; ++ char *s; ++ int err; ++ ++ /* if it's set do not allow changes */ ++ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) ++ return -EPERM; ++ ++ /* copy to path buffer (and make sure it's always zero terminated */ ++ count = snprintf(overlay->path, sizeof(overlay->path) - 1, "%s", p); ++ overlay->path[sizeof(overlay->path) - 1] = '\0'; ++ ++ /* strip trailing newlines */ ++ s = overlay->path + strlen(overlay->path); ++ while (s > overlay->path && *--s == '\n') ++ *s = '\0'; ++ ++ pr_debug("%s: path is '%s'\n", __func__, overlay->path); ++ ++ err = request_firmware(&overlay->fw, overlay->path, NULL); ++ if (err != 0) ++ goto out_err; ++ ++ err = create_overlay(overlay, (void *)overlay->fw->data); ++ if (err != 0) ++ goto out_err; ++ ++ return count; ++ ++out_err: ++ ++ release_firmware(overlay->fw); ++ overlay->fw = NULL; ++ ++ overlay->path[0] = '\0'; ++ return err; ++} ++ ++static ssize_t cfs_overlay_item_status_show(struct config_item *item, ++ char *page) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ return sprintf(page, "%s\n", ++ overlay->ov_id >= 0 ? "applied" : "unapplied"); ++} ++ ++CONFIGFS_ATTR(cfs_overlay_item_, path); ++CONFIGFS_ATTR_RO(cfs_overlay_item_, status); ++ ++static struct configfs_attribute *cfs_overlay_attrs[] = { ++ &cfs_overlay_item_attr_path, ++ &cfs_overlay_item_attr_status, ++ NULL, ++}; ++ ++ssize_t cfs_overlay_item_dtbo_read(struct config_item *item, ++ void *buf, size_t max_count) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ pr_debug("%s: buf=%p max_count=%zu\n", __func__, ++ buf, max_count); ++ ++ if (overlay->dtbo == NULL) ++ return 0; ++ ++ /* copy if buffer provided */ ++ if (buf != NULL) { ++ /* the buffer must be large enough */ ++ if (overlay->dtbo_size > max_count) ++ return -ENOSPC; ++ ++ memcpy(buf, overlay->dtbo, overlay->dtbo_size); ++ } ++ ++ return overlay->dtbo_size; ++} ++ ++ssize_t cfs_overlay_item_dtbo_write(struct config_item *item, ++ const void *buf, size_t count) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ int err; ++ ++ /* if it's set do not allow changes */ ++ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) ++ return -EPERM; ++ ++ /* copy the contents */ ++ overlay->dtbo = kmemdup(buf, count, GFP_KERNEL); ++ if (overlay->dtbo == NULL) ++ return -ENOMEM; ++ ++ overlay->dtbo_size = count; ++ ++ err = create_overlay(overlay, overlay->dtbo); ++ if (err != 0) ++ goto out_err; ++ ++ return count; ++ ++out_err: ++ kfree(overlay->dtbo); ++ overlay->dtbo = NULL; ++ overlay->dtbo_size = 0; ++ ++ return err; ++} ++ ++CONFIGFS_BIN_ATTR(cfs_overlay_item_, dtbo, NULL, SZ_1M); ++ ++static struct configfs_bin_attribute *cfs_overlay_bin_attrs[] = { ++ &cfs_overlay_item_attr_dtbo, ++ NULL, ++}; ++ ++static void cfs_overlay_release(struct config_item *item) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ if (overlay->ov_id >= 0) ++ of_overlay_remove(&overlay->ov_id); ++ if (overlay->fw) ++ release_firmware(overlay->fw); ++ /* kfree with NULL is safe */ ++ kfree(overlay->dtbo); ++ kfree(overlay); ++} ++ ++static struct configfs_item_operations cfs_overlay_item_ops = { ++ .release = cfs_overlay_release, ++}; ++ ++static struct config_item_type cfs_overlay_type = { ++ .ct_item_ops = &cfs_overlay_item_ops, ++ .ct_attrs = cfs_overlay_attrs, ++ .ct_bin_attrs = cfs_overlay_bin_attrs, ++ .ct_owner = THIS_MODULE, ++}; ++ ++static struct config_item *cfs_overlay_group_make_item( ++ struct config_group *group, const char *name) ++{ ++ struct cfs_overlay_item *overlay; ++ ++ overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); ++ if (!overlay) ++ return ERR_PTR(-ENOMEM); ++ overlay->ov_id = -1; ++ ++ config_item_init_type_name(&overlay->item, name, &cfs_overlay_type); ++ return &overlay->item; ++} ++ ++static void cfs_overlay_group_drop_item(struct config_group *group, ++ struct config_item *item) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ config_item_put(&overlay->item); ++} ++ ++static struct configfs_group_operations overlays_ops = { ++ .make_item = cfs_overlay_group_make_item, ++ .drop_item = cfs_overlay_group_drop_item, ++}; ++ ++static struct config_item_type overlays_type = { ++ .ct_group_ops = &overlays_ops, ++ .ct_owner = THIS_MODULE, ++}; ++ ++static struct configfs_group_operations of_cfs_ops = { ++ /* empty - we don't allow anything to be created */ ++}; ++ ++static struct config_item_type of_cfs_type = { ++ .ct_group_ops = &of_cfs_ops, ++ .ct_owner = THIS_MODULE, ++}; ++ ++struct config_group of_cfs_overlay_group; ++ ++static struct configfs_subsystem of_cfs_subsys = { ++ .su_group = { ++ .cg_item = { ++ .ci_namebuf = "device-tree", ++ .ci_type = &of_cfs_type, ++ }, ++ }, ++ .su_mutex = __MUTEX_INITIALIZER(of_cfs_subsys.su_mutex), ++}; ++ ++static int __init of_cfs_init(void) ++{ ++ int ret; ++ ++ pr_info("%s\n", __func__); ++ ++ config_group_init(&of_cfs_subsys.su_group); ++ config_group_init_type_name(&of_cfs_overlay_group, "overlays", ++ &overlays_type); ++ configfs_add_default_group(&of_cfs_overlay_group, ++ &of_cfs_subsys.su_group); ++ ++ ret = configfs_register_subsystem(&of_cfs_subsys); ++ if (ret != 0) { ++ pr_err("%s: failed to register subsys\n", __func__); ++ goto out; ++ } ++ pr_info("%s: OK\n", __func__); ++out: ++ return ret; ++} ++late_initcall(of_cfs_init); diff --git a/target/linux/brcm2708/patches-4.19/950-0092-OF-DT-Overlay-configfs-interface.patch b/target/linux/brcm2708/patches-4.19/950-0092-OF-DT-Overlay-configfs-interface.patch deleted file mode 100644 index 7226269614..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0092-OF-DT-Overlay-configfs-interface.patch +++ /dev/null @@ -1,427 +0,0 @@ -From dc0f4681729e9bfe506ab8b15852363cb59bdaf5 Mon Sep 17 00:00:00 2001 -From: Pantelis Antoniou -Date: Wed, 3 Dec 2014 13:23:28 +0200 -Subject: [PATCH 092/806] OF: DT-Overlay configfs interface - -This is a port of Pantelis Antoniou's v3 port that makes use of the -new upstreamed configfs support for binary attributes. - -Original commit message: - -Add a runtime interface to using configfs for generic device tree overlay -usage. With it its possible to use device tree overlays without having -to use a per-platform overlay manager. - -Please see Documentation/devicetree/configfs-overlays.txt for more info. - -Changes since v2: -- Removed ifdef CONFIG_OF_OVERLAY (since for now it's required) -- Created a documentation entry -- Slight rewording in Kconfig - -Changes since v1: -- of_resolve() -> of_resolve_phandles(). - -Originally-signed-off-by: Pantelis Antoniou -Signed-off-by: Phil Elwell - -DT configfs: Fix build errors on other platforms - -Signed-off-by: Phil Elwell - -DT configfs: fix build error - -There is an error when compiling rpi-4.6.y branch: - CC drivers/of/configfs.o -drivers/of/configfs.c:291:21: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] - .default_groups = of_cfs_def_groups, - ^ -drivers/of/configfs.c:291:21: note: (near initialization for 'of_cfs_subsys.su_group.default_groups.next') - -The .default_groups is linked list since commit -1ae1602de028acaa42a0f6ff18d19756f8e825c6. -This commit uses configfs_add_default_group to fix this problem. - -Signed-off-by: Slawomir Stepien - -configfs: New of_overlay API ---- - .../devicetree/configfs-overlays.txt | 31 ++ - drivers/of/Kconfig | 7 + - drivers/of/Makefile | 1 + - drivers/of/configfs.c | 310 ++++++++++++++++++ - 4 files changed, 349 insertions(+) - create mode 100644 Documentation/devicetree/configfs-overlays.txt - create mode 100644 drivers/of/configfs.c - ---- /dev/null -+++ b/Documentation/devicetree/configfs-overlays.txt -@@ -0,0 +1,31 @@ -+Howto use the configfs overlay interface. -+ -+A device-tree configfs entry is created in /config/device-tree/overlays -+and and it is manipulated using standard file system I/O. -+Note that this is a debug level interface, for use by developers and -+not necessarily something accessed by normal users due to the -+security implications of having direct access to the kernel's device tree. -+ -+* To create an overlay you mkdir the directory: -+ -+ # mkdir /config/device-tree/overlays/foo -+ -+* Either you echo the overlay firmware file to the path property file. -+ -+ # echo foo.dtbo >/config/device-tree/overlays/foo/path -+ -+* Or you cat the contents of the overlay to the dtbo file -+ -+ # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo -+ -+The overlay file will be applied, and devices will be created/destroyed -+as required. -+ -+To remove it simply rmdir the directory. -+ -+ # rmdir /config/device-tree/overlays/foo -+ -+The rationalle of the dual interface (firmware & direct copy) is that each is -+better suited to different use patterns. The firmware interface is what's -+intended to be used by hardware managers in the kernel, while the copy interface -+make sense for developers (since it avoids problems with namespaces). ---- a/drivers/of/Kconfig -+++ b/drivers/of/Kconfig -@@ -104,4 +104,11 @@ config OF_OVERLAY - config OF_NUMA - bool - -+config OF_CONFIGFS -+ bool "Device Tree Overlay ConfigFS interface" -+ select CONFIGFS_FS -+ select OF_OVERLAY -+ help -+ Enable a simple user-space driven DT overlay interface. -+ - endif # OF ---- a/drivers/of/Makefile -+++ b/drivers/of/Makefile -@@ -1,6 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0 - obj-y = base.o device.o platform.o property.o - obj-$(CONFIG_OF_KOBJ) += kobj.o -+obj-$(CONFIG_OF_CONFIGFS) += configfs.o - obj-$(CONFIG_OF_DYNAMIC) += dynamic.o - obj-$(CONFIG_OF_FLATTREE) += fdt.o - obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o ---- /dev/null -+++ b/drivers/of/configfs.c -@@ -0,0 +1,310 @@ -+/* -+ * Configfs entries for device-tree -+ * -+ * Copyright (C) 2013 - Pantelis Antoniou -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "of_private.h" -+ -+struct cfs_overlay_item { -+ struct config_item item; -+ -+ char path[PATH_MAX]; -+ -+ const struct firmware *fw; -+ struct device_node *overlay; -+ int ov_id; -+ -+ void *dtbo; -+ int dtbo_size; -+}; -+ -+static int create_overlay(struct cfs_overlay_item *overlay, void *blob) -+{ -+ int err; -+ -+ /* unflatten the tree */ -+ of_fdt_unflatten_tree(blob, NULL, &overlay->overlay); -+ if (overlay->overlay == NULL) { -+ pr_err("%s: failed to unflatten tree\n", __func__); -+ err = -EINVAL; -+ goto out_err; -+ } -+ pr_debug("%s: unflattened OK\n", __func__); -+ -+ /* mark it as detached */ -+ of_node_set_flag(overlay->overlay, OF_DETACHED); -+ -+ /* perform resolution */ -+ err = of_resolve_phandles(overlay->overlay); -+ if (err != 0) { -+ pr_err("%s: Failed to resolve tree\n", __func__); -+ goto out_err; -+ } -+ pr_debug("%s: resolved OK\n", __func__); -+ -+ err = of_overlay_apply(overlay->overlay, &overlay->ov_id); -+ if (err < 0) { -+ pr_err("%s: Failed to create overlay (err=%d)\n", -+ __func__, err); -+ goto out_err; -+ } -+ -+out_err: -+ return err; -+} -+ -+static inline struct cfs_overlay_item *to_cfs_overlay_item( -+ struct config_item *item) -+{ -+ return item ? container_of(item, struct cfs_overlay_item, item) : NULL; -+} -+ -+static ssize_t cfs_overlay_item_path_show(struct config_item *item, -+ char *page) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ return sprintf(page, "%s\n", overlay->path); -+} -+ -+static ssize_t cfs_overlay_item_path_store(struct config_item *item, -+ const char *page, size_t count) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ const char *p = page; -+ char *s; -+ int err; -+ -+ /* if it's set do not allow changes */ -+ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) -+ return -EPERM; -+ -+ /* copy to path buffer (and make sure it's always zero terminated */ -+ count = snprintf(overlay->path, sizeof(overlay->path) - 1, "%s", p); -+ overlay->path[sizeof(overlay->path) - 1] = '\0'; -+ -+ /* strip trailing newlines */ -+ s = overlay->path + strlen(overlay->path); -+ while (s > overlay->path && *--s == '\n') -+ *s = '\0'; -+ -+ pr_debug("%s: path is '%s'\n", __func__, overlay->path); -+ -+ err = request_firmware(&overlay->fw, overlay->path, NULL); -+ if (err != 0) -+ goto out_err; -+ -+ err = create_overlay(overlay, (void *)overlay->fw->data); -+ if (err != 0) -+ goto out_err; -+ -+ return count; -+ -+out_err: -+ -+ release_firmware(overlay->fw); -+ overlay->fw = NULL; -+ -+ overlay->path[0] = '\0'; -+ return err; -+} -+ -+static ssize_t cfs_overlay_item_status_show(struct config_item *item, -+ char *page) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ -+ return sprintf(page, "%s\n", -+ overlay->ov_id >= 0 ? "applied" : "unapplied"); -+} -+ -+CONFIGFS_ATTR(cfs_overlay_item_, path); -+CONFIGFS_ATTR_RO(cfs_overlay_item_, status); -+ -+static struct configfs_attribute *cfs_overlay_attrs[] = { -+ &cfs_overlay_item_attr_path, -+ &cfs_overlay_item_attr_status, -+ NULL, -+}; -+ -+ssize_t cfs_overlay_item_dtbo_read(struct config_item *item, -+ void *buf, size_t max_count) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ -+ pr_debug("%s: buf=%p max_count=%zu\n", __func__, -+ buf, max_count); -+ -+ if (overlay->dtbo == NULL) -+ return 0; -+ -+ /* copy if buffer provided */ -+ if (buf != NULL) { -+ /* the buffer must be large enough */ -+ if (overlay->dtbo_size > max_count) -+ return -ENOSPC; -+ -+ memcpy(buf, overlay->dtbo, overlay->dtbo_size); -+ } -+ -+ return overlay->dtbo_size; -+} -+ -+ssize_t cfs_overlay_item_dtbo_write(struct config_item *item, -+ const void *buf, size_t count) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ int err; -+ -+ /* if it's set do not allow changes */ -+ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) -+ return -EPERM; -+ -+ /* copy the contents */ -+ overlay->dtbo = kmemdup(buf, count, GFP_KERNEL); -+ if (overlay->dtbo == NULL) -+ return -ENOMEM; -+ -+ overlay->dtbo_size = count; -+ -+ err = create_overlay(overlay, overlay->dtbo); -+ if (err != 0) -+ goto out_err; -+ -+ return count; -+ -+out_err: -+ kfree(overlay->dtbo); -+ overlay->dtbo = NULL; -+ overlay->dtbo_size = 0; -+ -+ return err; -+} -+ -+CONFIGFS_BIN_ATTR(cfs_overlay_item_, dtbo, NULL, SZ_1M); -+ -+static struct configfs_bin_attribute *cfs_overlay_bin_attrs[] = { -+ &cfs_overlay_item_attr_dtbo, -+ NULL, -+}; -+ -+static void cfs_overlay_release(struct config_item *item) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ -+ if (overlay->ov_id >= 0) -+ of_overlay_remove(&overlay->ov_id); -+ if (overlay->fw) -+ release_firmware(overlay->fw); -+ /* kfree with NULL is safe */ -+ kfree(overlay->dtbo); -+ kfree(overlay); -+} -+ -+static struct configfs_item_operations cfs_overlay_item_ops = { -+ .release = cfs_overlay_release, -+}; -+ -+static struct config_item_type cfs_overlay_type = { -+ .ct_item_ops = &cfs_overlay_item_ops, -+ .ct_attrs = cfs_overlay_attrs, -+ .ct_bin_attrs = cfs_overlay_bin_attrs, -+ .ct_owner = THIS_MODULE, -+}; -+ -+static struct config_item *cfs_overlay_group_make_item( -+ struct config_group *group, const char *name) -+{ -+ struct cfs_overlay_item *overlay; -+ -+ overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); -+ if (!overlay) -+ return ERR_PTR(-ENOMEM); -+ overlay->ov_id = -1; -+ -+ config_item_init_type_name(&overlay->item, name, &cfs_overlay_type); -+ return &overlay->item; -+} -+ -+static void cfs_overlay_group_drop_item(struct config_group *group, -+ struct config_item *item) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ -+ config_item_put(&overlay->item); -+} -+ -+static struct configfs_group_operations overlays_ops = { -+ .make_item = cfs_overlay_group_make_item, -+ .drop_item = cfs_overlay_group_drop_item, -+}; -+ -+static struct config_item_type overlays_type = { -+ .ct_group_ops = &overlays_ops, -+ .ct_owner = THIS_MODULE, -+}; -+ -+static struct configfs_group_operations of_cfs_ops = { -+ /* empty - we don't allow anything to be created */ -+}; -+ -+static struct config_item_type of_cfs_type = { -+ .ct_group_ops = &of_cfs_ops, -+ .ct_owner = THIS_MODULE, -+}; -+ -+struct config_group of_cfs_overlay_group; -+ -+static struct configfs_subsystem of_cfs_subsys = { -+ .su_group = { -+ .cg_item = { -+ .ci_namebuf = "device-tree", -+ .ci_type = &of_cfs_type, -+ }, -+ }, -+ .su_mutex = __MUTEX_INITIALIZER(of_cfs_subsys.su_mutex), -+}; -+ -+static int __init of_cfs_init(void) -+{ -+ int ret; -+ -+ pr_info("%s\n", __func__); -+ -+ config_group_init(&of_cfs_subsys.su_group); -+ config_group_init_type_name(&of_cfs_overlay_group, "overlays", -+ &overlays_type); -+ configfs_add_default_group(&of_cfs_overlay_group, -+ &of_cfs_subsys.su_group); -+ -+ ret = configfs_register_subsystem(&of_cfs_subsys); -+ if (ret != 0) { -+ pr_err("%s: failed to register subsys\n", __func__); -+ goto out; -+ } -+ pr_info("%s: OK\n", __func__); -+out: -+ return ret; -+} -+late_initcall(of_cfs_init); diff --git a/target/linux/brcm2708/patches-4.19/950-0092-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch b/target/linux/brcm2708/patches-4.19/950-0092-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch new file mode 100644 index 0000000000..756fd3a507 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0092-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch @@ -0,0 +1,23 @@ +From b81157e1b8640fe332eb5edd3f62ef3de1c786a3 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 17 Dec 2015 13:37:07 +0000 +Subject: [PATCH] hci_h5: Don't send conf_req when ACTIVE + +Without this patch, a modem and kernel can continuously bombard each +other with conf_req and conf_rsp messages, in a demented game of tag. +--- + drivers/bluetooth/hci_h5.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/bluetooth/hci_h5.c ++++ b/drivers/bluetooth/hci_h5.c +@@ -352,7 +352,8 @@ static void h5_handle_internal_rx(struct + h5_link_control(hu, conf_req, 3); + } else if (memcmp(data, conf_req, 2) == 0) { + h5_link_control(hu, conf_rsp, 2); +- h5_link_control(hu, conf_req, 3); ++ if (h5->state != H5_ACTIVE) ++ h5_link_control(hu, conf_req, 3); + } else if (memcmp(data, conf_rsp, 2) == 0) { + if (H5_HDR_LEN(hdr) > 2) + h5->tx_win = (data[2] & 0x07); diff --git a/target/linux/brcm2708/patches-4.19/950-0093-Add-arm64-configuration-and-device-tree-differences..patch b/target/linux/brcm2708/patches-4.19/950-0093-Add-arm64-configuration-and-device-tree-differences..patch new file mode 100644 index 0000000000..4e49856630 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0093-Add-arm64-configuration-and-device-tree-differences..patch @@ -0,0 +1,125 @@ +From 9731e002f651c0b386137105c8d91d198b73b721 Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Wed, 24 Aug 2016 03:35:56 -0700 +Subject: [PATCH] Add arm64 configuration and device tree differences. + Disable MMC_BCM2835_SDHOST and MMC_BCM2835 since these drivers are crashing + at the moment. + +ARM64: Modify default config to get raspbian to boot (#1686) + +1. Enable emulation of deprecated instructions. +2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. +3. Switch the default governer to powersave. +4. Include the watchdog timer driver in the kernel image rather then a module. + +Tested with raspbian-jessie 2016-09-23. + +ARM64: Make it work again on 4.9 (#1790) + +* Invoke the dtc compiler with the same options used in arm mode. +* ARM64 now uses the bcm2835 platform just like ARM32. +* ARM64: Update bcmrpi3_defconfig + +Signed-off-by: Michael Zoran + +Update arm64 Makefile to compile bcm2710 dtb file + +The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. + +arm64: enable thermal / enable mmc (#2425) + +This commit adds support for RP3-B-Plus in in arch arm64 (#2464) + +Enable AES, AES bit slice, and AES NEON engines on arm64 + +Enable bbr module for arm64 +--- + arch/arm64/Kconfig.platforms | 6 - + arch/arm64/boot/dts/Makefile | 2 + + arch/arm64/boot/dts/broadcom/Makefile | 3 + + .../dts/broadcom/bcm2710-rpi-3-b-plus.dts | 3 + + .../boot/dts/broadcom/bcm2710-rpi-3-b.dts | 3 + + .../dts/broadcom/bcm283x-rpi-lan7515.dtsi | 1 + + arch/arm64/boot/dts/overlays | 1 + + 8 files changed, 1302 insertions(+), 6 deletions(-) + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts + create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi + create mode 120000 arch/arm64/boot/dts/overlays + +diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms +index 393d2b524284..e9bdec0ead72 100644 +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -1,11 +1,5 @@ + menu "Platform selection" + +-config ARCH_ACTIONS +- bool "Actions Semi Platforms" +- select OWL_TIMER +- help +- This enables support for the Actions Semiconductor S900 SoC family. +- + config ARCH_SUNXI + bool "Allwinner sunxi 64-bit SoC Family" + select ARCH_HAS_RESET_CONTROLLER +diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile +index 4690364d584b..cd9c79566ebe 100644 +--- a/arch/arm64/boot/dts/Makefile ++++ b/arch/arm64/boot/dts/Makefile +@@ -26,3 +26,5 @@ subdir-y += synaptics + subdir-y += ti + subdir-y += xilinx + subdir-y += zte ++ ++subdir-y += overlays +diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile +index 1193a9e34bbb..78d23305bc31 100644 +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -1,6 +1,9 @@ + # SPDX-License-Identifier: GPL-2.0 + dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ + bcm2837-rpi-3-b-plus.dtb ++dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb ++dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb ++dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb + + subdir-y += northstar2 + subdir-y += stingray +diff --git a/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts +new file mode 100644 +index 000000000000..d9242ff77079 +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts +@@ -0,0 +1,3 @@ ++#define RPI364 ++ ++#include "../../../../arm/boot/dts/bcm2710-rpi-3-b-plus.dts" +diff --git a/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts +new file mode 100644 +index 000000000000..deb33441da95 +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts +@@ -0,0 +1,3 @@ ++#define RPI364 ++ ++#include "../../../../arm/boot/dts/bcm2710-rpi-3-b.dts" +diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi +new file mode 120000 +index 000000000000..fc4c05bbe7fd +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi +@@ -0,0 +1 @@ ++../../../../arm/boot/dts/bcm283x-rpi-lan7515.dtsi +\ No newline at end of file +diff --git a/arch/arm64/boot/dts/overlays b/arch/arm64/boot/dts/overlays +new file mode 120000 +index 000000000000..ded08646b6f6 +--- /dev/null ++++ b/arch/arm64/boot/dts/overlays +@@ -0,0 +1 @@ ++../../../arm/boot/dts/overlays +\ No newline at end of file +-- +2.20.1 diff --git a/target/linux/brcm2708/patches-4.19/950-0094-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch b/target/linux/brcm2708/patches-4.19/950-0094-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch new file mode 100644 index 0000000000..85b8edb15e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0094-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch @@ -0,0 +1,329 @@ +From 1ab2bc7fb6de19bcf4da83f4f0f384d93db48711 Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Sat, 14 Jan 2017 21:33:51 -0800 +Subject: [PATCH] ARM64/DWC_OTG: Port dwc_otg driver to ARM64 + +In ARM64, the FIQ mechanism used by this driver is not current +implemented. As a workaround, reqular IRQ is used instead +of FIQ. + +In a separate change, the IRQ-CPU mapping is round robined +on ARM64 to increase concurrency and allow multiple interrupts +to be serviced at a time. This reduces the need for FIQ. + +Tests Run: + +This mechanism is most likely to break when multiple USB devices +are attached at the same time. So the system was tested under +stress. + +Devices: + +1. USB Speakers playing back a FLAC audio through VLC + at 96KHz.(Higher then typically, but supported on my speakers). + +2. sftp transferring large files through the buildin ethernet + connection which is connected through USB. + +3. Keyboard and mouse attached and being used. + +Although I do occasionally hear some glitches, the music seems to +play quite well. + +Signed-off-by: Michael Zoran +--- + drivers/usb/host/dwc_otg/Makefile | 3 + + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 17 +++++ + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 24 +++++++ + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 4 ++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 3 +- + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 72 ++++++++++++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 2 + + 8 files changed, 128 insertions(+), 1 deletion(-) + +--- a/drivers/usb/host/dwc_otg/Makefile ++++ b/drivers/usb/host/dwc_otg/Makefile +@@ -37,7 +37,10 @@ dwc_otg-objs += dwc_otg_pcd_linux.o dwc_ + dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o + dwc_otg-objs += dwc_otg_adp.o + dwc_otg-objs += dwc_otg_fiq_fsm.o ++ifneq ($(CONFIG_ARM64),y) + dwc_otg-objs += dwc_otg_fiq_stub.o ++endif ++ + ifneq ($(CFI),) + dwc_otg-objs += dwc_otg_cfi.o + endif +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +@@ -74,6 +74,21 @@ void notrace _fiq_print(enum fiq_debug_l + } + } + ++ ++#ifdef CONFIG_ARM64 ++ ++inline void fiq_fsm_spin_lock(fiq_lock_t *lock) ++{ ++ spin_lock((spinlock_t *)lock); ++} ++ ++inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) ++{ ++ spin_unlock((spinlock_t *)lock); ++} ++ ++#else ++ + /** + * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock + * Must be called with local interrupts and FIQ disabled. +@@ -121,6 +136,8 @@ inline void fiq_fsm_spin_unlock(fiq_lock + inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { } + #endif + ++#endif ++ + /** + * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction + * @channel: channel to re-enable +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h +@@ -127,6 +127,12 @@ enum fiq_debug_level { + FIQDBG_PORTHUB = (1 << 3), + }; + ++#ifdef CONFIG_ARM64 ++ ++typedef spinlock_t fiq_lock_t; ++ ++#else ++ + typedef struct { + union { + uint32_t slock; +@@ -137,6 +143,8 @@ typedef struct { + }; + } fiq_lock_t; + ++#endif ++ + struct fiq_state; + + extern void _fiq_print (enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...); +@@ -357,6 +365,22 @@ struct fiq_state { + struct fiq_channel_state channel[0]; + }; + ++#ifdef CONFIG_ARM64 ++ ++#ifdef local_fiq_enable ++#undef local_fiq_enable ++#endif ++ ++#ifdef local_fiq_disable ++#undef local_fiq_disable ++#endif ++ ++extern void local_fiq_enable(void); ++ ++extern void local_fiq_disable(void); ++ ++#endif ++ + extern void fiq_fsm_spin_lock(fiq_lock_t *lock); + + extern void fiq_fsm_spin_unlock(fiq_lock_t *lock); +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -1014,6 +1014,10 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd + } + DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels))); + ++#ifdef CONFIG_ARM64 ++ spin_lock_init(&hcd->fiq_state->lock); ++#endif ++ + for (i = 0; i < num_channels; i++) { + hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; + } +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h +@@ -116,7 +116,11 @@ extern int32_t dwc_otg_hcd_handle_intr(d + /** This function is used to handle the fast interrupt + * + */ ++#ifdef CONFIG_ARM64 ++extern void dwc_otg_hcd_handle_fiq(void); ++#else + extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void); ++#endif + + /** + * Returns private data set by +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +@@ -36,8 +36,9 @@ + #include "dwc_otg_regs.h" + + #include ++#ifdef CONFIG_ARM + #include +- ++#endif + + extern bool microframe_schedule; + +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -51,7 +51,9 @@ + #include + #include + #include ++#ifdef CONFIG_ARM + #include ++#endif + #include + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) + #include <../drivers/usb/core/hcd.h> +@@ -71,6 +73,13 @@ + #include "dwc_otg_driver.h" + #include "dwc_otg_hcd.h" + ++#ifndef __virt_to_bus ++#define __virt_to_bus __virt_to_phys ++#define __bus_to_virt __phys_to_virt ++#define __pfn_to_bus(x) __pfn_to_phys(x) ++#define __bus_to_pfn(x) __phys_to_pfn(x) ++#endif ++ + extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end; + + /** +@@ -395,14 +404,49 @@ static struct dwc_otg_hcd_function_ops h + .get_b_hnp_enable = _get_b_hnp_enable, + }; + ++#ifdef CONFIG_ARM64 ++ ++static int simfiq_irq = -1; ++ ++void local_fiq_enable(void) ++{ ++ if (simfiq_irq >= 0) ++ enable_irq(simfiq_irq); ++} ++ ++void local_fiq_disable(void) ++{ ++ if (simfiq_irq >= 0) ++ disable_irq(simfiq_irq); ++} ++ ++irqreturn_t fiq_irq_handler(int irq, void *dev_id) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)dev_id; ++ ++ if (fiq_fsm_enable) ++ dwc_otg_fiq_fsm(dwc_otg_hcd->fiq_state, dwc_otg_hcd->core_if->core_params->host_channels); ++ else ++ dwc_otg_fiq_nop(dwc_otg_hcd->fiq_state); ++ ++ return IRQ_HANDLED; ++} ++ ++#else + static struct fiq_handler fh = { + .name = "usb_fiq", + }; + ++#endif ++ + static void hcd_init_fiq(void *cookie) + { + dwc_otg_device_t *otg_dev = cookie; + dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; ++#ifdef CONFIG_ARM64 ++ int retval = 0; ++ int irq; ++#else + struct pt_regs regs; + int irq; + +@@ -430,6 +474,7 @@ static void hcd_init_fiq(void *cookie) + + // __show_regs(®s); + set_fiq_regs(®s); ++#endif + + //Set the mphi periph to the required registers + dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; +@@ -448,6 +493,23 @@ static void hcd_init_fiq(void *cookie) + DWC_WARN("MPHI periph has NOT been enabled"); + #endif + // Enable FIQ interrupt from USB peripheral ++#ifdef CONFIG_ARM64 ++ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); ++ ++ if (irq < 0) { ++ DWC_ERROR("Can't get SIM-FIQ irq"); ++ return; ++ } ++ ++ retval = request_irq(irq, fiq_irq_handler, 0, "dwc_otg_sim-fiq", dwc_otg_hcd); ++ ++ if (retval < 0) { ++ DWC_ERROR("Unable to request SIM-FIQ irq\n"); ++ return; ++ } ++ ++ simfiq_irq = irq; ++#else + #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER + irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); + #else +@@ -464,6 +526,8 @@ static void hcd_init_fiq(void *cookie) + smp_mb(); + enable_fiq(irq); + local_fiq_enable(); ++#endif ++ + } + + /** +@@ -526,6 +590,13 @@ int hcd_init(dwc_bus_dev_t *_dev) + otg_dev->hcd = dwc_otg_hcd; + otg_dev->hcd->otg_dev = otg_dev; + ++#ifdef CONFIG_ARM64 ++ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) ++ goto error2; ++ ++ if (fiq_enable) ++ hcd_init_fiq(otg_dev); ++#else + if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { + goto error2; + } +@@ -542,6 +613,7 @@ int hcd_init(dwc_bus_dev_t *_dev) + smp_call_function_single(0, hcd_init_fiq, otg_dev, 1); + } + } ++#endif + + hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) +--- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +@@ -76,8 +76,10 @@ + + #ifdef PLATFORM_INTERFACE + #include ++#ifdef CONFIG_ARM + #include + #endif ++#endif + + /** The OS page size */ + #define DWC_OS_PAGE_SIZE PAGE_SIZE diff --git a/target/linux/brcm2708/patches-4.19/950-0095-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch b/target/linux/brcm2708/patches-4.19/950-0095-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch new file mode 100644 index 0000000000..235a72fe25 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0095-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch @@ -0,0 +1,72 @@ +From 3a9f3c695a95d3c34a360e9a95bccce37806c952 Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Sat, 14 Jan 2017 21:43:57 -0800 +Subject: [PATCH] ARM64: Round-Robin dispatch IRQs between CPUs. + +IRQ-CPU mapping is round robined on ARM64 to increase +concurrency and allow multiple interrupts to be serviced +at a time. This reduces the need for FIQ. + +Signed-off-by: Michael Zoran +--- + drivers/irqchip/irq-bcm2835.c | 15 ++++++++++++++- + drivers/irqchip/irq-bcm2836.c | 21 +++++++++++++++++++++ + 2 files changed, 35 insertions(+), 1 deletion(-) + +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -162,10 +162,23 @@ static void armctrl_unmask_irq(struct ir + } + } + ++#ifdef CONFIG_ARM64 ++void bcm2836_arm_irqchip_spin_gpu_irq(void); ++ ++static void armctrl_ack_irq(struct irq_data *d) ++{ ++ bcm2836_arm_irqchip_spin_gpu_irq(); ++} ++ ++#endif ++ + static struct irq_chip armctrl_chip = { + .name = "ARMCTRL-level", + .irq_mask = armctrl_mask_irq, +- .irq_unmask = armctrl_unmask_irq ++ .irq_unmask = armctrl_unmask_irq, ++#ifdef CONFIG_ARM64 ++ .irq_ack = armctrl_ack_irq ++#endif + }; + + static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, +--- a/drivers/irqchip/irq-bcm2836.c ++++ b/drivers/irqchip/irq-bcm2836.c +@@ -95,6 +95,27 @@ static void bcm2836_arm_irqchip_unmask_g + { + } + ++#ifdef CONFIG_ARM64 ++ ++void bcm2836_arm_irqchip_spin_gpu_irq(void) ++{ ++ u32 i; ++ void __iomem *gpurouting = (intc.base + LOCAL_GPU_ROUTING); ++ u32 routing_val = readl(gpurouting); ++ ++ for (i = 1; i <= 3; i++) { ++ u32 new_routing_val = (routing_val + i) & 3; ++ ++ if (cpu_active(new_routing_val)) { ++ writel(new_routing_val, gpurouting); ++ return; ++ } ++ } ++} ++EXPORT_SYMBOL(bcm2836_arm_irqchip_spin_gpu_irq); ++ ++#endif ++ + static struct irq_chip bcm2836_arm_irqchip_gpu = { + .name = "bcm2836-gpu", + .irq_mask = bcm2836_arm_irqchip_mask_gpu_irq, diff --git a/target/linux/brcm2708/patches-4.19/950-0095-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch b/target/linux/brcm2708/patches-4.19/950-0095-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch deleted file mode 100644 index 597c90a182..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0095-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch +++ /dev/null @@ -1,23 +0,0 @@ -From b81157e1b8640fe332eb5edd3f62ef3de1c786a3 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 17 Dec 2015 13:37:07 +0000 -Subject: [PATCH 095/806] hci_h5: Don't send conf_req when ACTIVE - -Without this patch, a modem and kernel can continuously bombard each -other with conf_req and conf_rsp messages, in a demented game of tag. ---- - drivers/bluetooth/hci_h5.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/bluetooth/hci_h5.c -+++ b/drivers/bluetooth/hci_h5.c -@@ -352,7 +352,8 @@ static void h5_handle_internal_rx(struct - h5_link_control(hu, conf_req, 3); - } else if (memcmp(data, conf_req, 2) == 0) { - h5_link_control(hu, conf_rsp, 2); -- h5_link_control(hu, conf_req, 3); -+ if (h5->state != H5_ACTIVE) -+ h5_link_control(hu, conf_req, 3); - } else if (memcmp(data, conf_rsp, 2) == 0) { - if (H5_HDR_LEN(hdr) > 2) - h5->tx_win = (data[2] & 0x07); diff --git a/target/linux/brcm2708/patches-4.19/950-0096-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch b/target/linux/brcm2708/patches-4.19/950-0096-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch new file mode 100644 index 0000000000..53506d1475 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0096-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch @@ -0,0 +1,28 @@ +From 61f4a666499f781e6441dab84993a635c43ddb58 Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Sat, 11 Feb 2017 01:18:31 -0800 +Subject: [PATCH] ARM64: Force hardware emulation of deprecated + instructions. + +--- + arch/arm64/kernel/armv8_deprecated.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm64/kernel/armv8_deprecated.c ++++ b/arch/arm64/kernel/armv8_deprecated.c +@@ -185,10 +185,15 @@ static void __init register_insn_emulati + + switch (ops->status) { + case INSN_DEPRECATED: ++#if 0 + insn->current_mode = INSN_EMULATE; + /* Disable the HW mode if it was turned on at early boot time */ + run_all_cpu_set_hw_mode(insn, false); ++#else ++ insn->current_mode = INSN_HW; ++ run_all_cpu_set_hw_mode(insn, true); + insn->max = INSN_HW; ++#endif + break; + case INSN_OBSOLETE: + insn->current_mode = INSN_UNDEF; diff --git a/target/linux/brcm2708/patches-4.19/950-0097-Add-arm64-configuration-and-device-tree-differences..patch b/target/linux/brcm2708/patches-4.19/950-0097-Add-arm64-configuration-and-device-tree-differences..patch deleted file mode 100644 index 695f9a5d25..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0097-Add-arm64-configuration-and-device-tree-differences..patch +++ /dev/null @@ -1,125 +0,0 @@ -From 9731e002f651c0b386137105c8d91d198b73b721 Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Wed, 24 Aug 2016 03:35:56 -0700 -Subject: [PATCH 097/806] Add arm64 configuration and device tree differences. - Disable MMC_BCM2835_SDHOST and MMC_BCM2835 since these drivers are crashing - at the moment. - -ARM64: Modify default config to get raspbian to boot (#1686) - -1. Enable emulation of deprecated instructions. -2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. -3. Switch the default governer to powersave. -4. Include the watchdog timer driver in the kernel image rather then a module. - -Tested with raspbian-jessie 2016-09-23. - -ARM64: Make it work again on 4.9 (#1790) - -* Invoke the dtc compiler with the same options used in arm mode. -* ARM64 now uses the bcm2835 platform just like ARM32. -* ARM64: Update bcmrpi3_defconfig - -Signed-off-by: Michael Zoran - -Update arm64 Makefile to compile bcm2710 dtb file - -The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. - -arm64: enable thermal / enable mmc (#2425) - -This commit adds support for RP3-B-Plus in in arch arm64 (#2464) - -Enable AES, AES bit slice, and AES NEON engines on arm64 - -Enable bbr module for arm64 ---- - arch/arm64/Kconfig.platforms | 6 - - arch/arm64/boot/dts/Makefile | 2 + - arch/arm64/boot/dts/broadcom/Makefile | 3 + - .../dts/broadcom/bcm2710-rpi-3-b-plus.dts | 3 + - .../boot/dts/broadcom/bcm2710-rpi-3-b.dts | 3 + - .../dts/broadcom/bcm283x-rpi-lan7515.dtsi | 1 + - arch/arm64/boot/dts/overlays | 1 + - 8 files changed, 1302 insertions(+), 6 deletions(-) - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts - create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi - create mode 120000 arch/arm64/boot/dts/overlays - -diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms -index 393d2b524284..e9bdec0ead72 100644 ---- a/arch/arm64/Kconfig.platforms -+++ b/arch/arm64/Kconfig.platforms -@@ -1,11 +1,5 @@ - menu "Platform selection" - --config ARCH_ACTIONS -- bool "Actions Semi Platforms" -- select OWL_TIMER -- help -- This enables support for the Actions Semiconductor S900 SoC family. -- - config ARCH_SUNXI - bool "Allwinner sunxi 64-bit SoC Family" - select ARCH_HAS_RESET_CONTROLLER -diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile -index 4690364d584b..cd9c79566ebe 100644 ---- a/arch/arm64/boot/dts/Makefile -+++ b/arch/arm64/boot/dts/Makefile -@@ -26,3 +26,5 @@ subdir-y += synaptics - subdir-y += ti - subdir-y += xilinx - subdir-y += zte -+ -+subdir-y += overlays -diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile -index 1193a9e34bbb..78d23305bc31 100644 ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -1,6 +1,9 @@ - # SPDX-License-Identifier: GPL-2.0 - dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb -+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb - - subdir-y += northstar2 - subdir-y += stingray -diff --git a/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts -new file mode 100644 -index 000000000000..d9242ff77079 ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2710-rpi-3-b-plus.dts" -diff --git a/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts -new file mode 100644 -index 000000000000..deb33441da95 ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2710-rpi-3-b.dts" -diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi -new file mode 120000 -index 000000000000..fc4c05bbe7fd ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi -@@ -0,0 +1 @@ -+../../../../arm/boot/dts/bcm283x-rpi-lan7515.dtsi -\ No newline at end of file -diff --git a/arch/arm64/boot/dts/overlays b/arch/arm64/boot/dts/overlays -new file mode 120000 -index 000000000000..ded08646b6f6 ---- /dev/null -+++ b/arch/arm64/boot/dts/overlays -@@ -0,0 +1 @@ -+../../../arm/boot/dts/overlays -\ No newline at end of file --- -2.20.1 diff --git a/target/linux/brcm2708/patches-4.19/950-0097-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch b/target/linux/brcm2708/patches-4.19/950-0097-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch new file mode 100644 index 0000000000..bd7a3a04e1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0097-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch @@ -0,0 +1,25 @@ +From 8333b8d6ed55d08e410afb7c9036f8a8e9186e69 Mon Sep 17 00:00:00 2001 +From: Khem Raj +Date: Fri, 10 Feb 2017 17:57:08 -0800 +Subject: [PATCH] build/arm64: Add rules for .dtbo files for dts + overlays + +We now create overlays as .dtbo files. + +Signed-off-by: Khem Raj +--- + arch/arm64/Makefile | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/arm64/Makefile ++++ b/arch/arm64/Makefile +@@ -131,6 +131,9 @@ zinstall install: + %.dtb: scripts + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ + ++%.dtbo: | scripts ++ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ ++ + PHONY += dtbs dtbs_install + + dtbs: prepare scripts diff --git a/target/linux/brcm2708/patches-4.19/950-0098-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch b/target/linux/brcm2708/patches-4.19/950-0098-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch deleted file mode 100644 index f370f694e9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0098-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch +++ /dev/null @@ -1,329 +0,0 @@ -From 1ab2bc7fb6de19bcf4da83f4f0f384d93db48711 Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Sat, 14 Jan 2017 21:33:51 -0800 -Subject: [PATCH 098/806] ARM64/DWC_OTG: Port dwc_otg driver to ARM64 - -In ARM64, the FIQ mechanism used by this driver is not current -implemented. As a workaround, reqular IRQ is used instead -of FIQ. - -In a separate change, the IRQ-CPU mapping is round robined -on ARM64 to increase concurrency and allow multiple interrupts -to be serviced at a time. This reduces the need for FIQ. - -Tests Run: - -This mechanism is most likely to break when multiple USB devices -are attached at the same time. So the system was tested under -stress. - -Devices: - -1. USB Speakers playing back a FLAC audio through VLC - at 96KHz.(Higher then typically, but supported on my speakers). - -2. sftp transferring large files through the buildin ethernet - connection which is connected through USB. - -3. Keyboard and mouse attached and being used. - -Although I do occasionally hear some glitches, the music seems to -play quite well. - -Signed-off-by: Michael Zoran ---- - drivers/usb/host/dwc_otg/Makefile | 3 + - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 17 +++++ - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 24 +++++++ - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 4 ++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 3 +- - drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 72 ++++++++++++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 2 + - 8 files changed, 128 insertions(+), 1 deletion(-) - ---- a/drivers/usb/host/dwc_otg/Makefile -+++ b/drivers/usb/host/dwc_otg/Makefile -@@ -37,7 +37,10 @@ dwc_otg-objs += dwc_otg_pcd_linux.o dwc_ - dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o - dwc_otg-objs += dwc_otg_adp.o - dwc_otg-objs += dwc_otg_fiq_fsm.o -+ifneq ($(CONFIG_ARM64),y) - dwc_otg-objs += dwc_otg_fiq_stub.o -+endif -+ - ifneq ($(CFI),) - dwc_otg-objs += dwc_otg_cfi.o - endif ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -@@ -74,6 +74,21 @@ void notrace _fiq_print(enum fiq_debug_l - } - } - -+ -+#ifdef CONFIG_ARM64 -+ -+inline void fiq_fsm_spin_lock(fiq_lock_t *lock) -+{ -+ spin_lock((spinlock_t *)lock); -+} -+ -+inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) -+{ -+ spin_unlock((spinlock_t *)lock); -+} -+ -+#else -+ - /** - * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock - * Must be called with local interrupts and FIQ disabled. -@@ -121,6 +136,8 @@ inline void fiq_fsm_spin_unlock(fiq_lock - inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { } - #endif - -+#endif -+ - /** - * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction - * @channel: channel to re-enable ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -@@ -127,6 +127,12 @@ enum fiq_debug_level { - FIQDBG_PORTHUB = (1 << 3), - }; - -+#ifdef CONFIG_ARM64 -+ -+typedef spinlock_t fiq_lock_t; -+ -+#else -+ - typedef struct { - union { - uint32_t slock; -@@ -137,6 +143,8 @@ typedef struct { - }; - } fiq_lock_t; - -+#endif -+ - struct fiq_state; - - extern void _fiq_print (enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...); -@@ -357,6 +365,22 @@ struct fiq_state { - struct fiq_channel_state channel[0]; - }; - -+#ifdef CONFIG_ARM64 -+ -+#ifdef local_fiq_enable -+#undef local_fiq_enable -+#endif -+ -+#ifdef local_fiq_disable -+#undef local_fiq_disable -+#endif -+ -+extern void local_fiq_enable(void); -+ -+extern void local_fiq_disable(void); -+ -+#endif -+ - extern void fiq_fsm_spin_lock(fiq_lock_t *lock); - - extern void fiq_fsm_spin_unlock(fiq_lock_t *lock); ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -1014,6 +1014,10 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd - } - DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels))); - -+#ifdef CONFIG_ARM64 -+ spin_lock_init(&hcd->fiq_state->lock); -+#endif -+ - for (i = 0; i < num_channels; i++) { - hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; - } ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h -@@ -116,7 +116,11 @@ extern int32_t dwc_otg_hcd_handle_intr(d - /** This function is used to handle the fast interrupt - * - */ -+#ifdef CONFIG_ARM64 -+extern void dwc_otg_hcd_handle_fiq(void); -+#else - extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void); -+#endif - - /** - * Returns private data set by ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c -@@ -36,8 +36,9 @@ - #include "dwc_otg_regs.h" - - #include -+#ifdef CONFIG_ARM - #include -- -+#endif - - extern bool microframe_schedule; - ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -@@ -51,7 +51,9 @@ - #include - #include - #include -+#ifdef CONFIG_ARM - #include -+#endif - #include - #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) - #include <../drivers/usb/core/hcd.h> -@@ -71,6 +73,13 @@ - #include "dwc_otg_driver.h" - #include "dwc_otg_hcd.h" - -+#ifndef __virt_to_bus -+#define __virt_to_bus __virt_to_phys -+#define __bus_to_virt __phys_to_virt -+#define __pfn_to_bus(x) __pfn_to_phys(x) -+#define __bus_to_pfn(x) __phys_to_pfn(x) -+#endif -+ - extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end; - - /** -@@ -395,14 +404,49 @@ static struct dwc_otg_hcd_function_ops h - .get_b_hnp_enable = _get_b_hnp_enable, - }; - -+#ifdef CONFIG_ARM64 -+ -+static int simfiq_irq = -1; -+ -+void local_fiq_enable(void) -+{ -+ if (simfiq_irq >= 0) -+ enable_irq(simfiq_irq); -+} -+ -+void local_fiq_disable(void) -+{ -+ if (simfiq_irq >= 0) -+ disable_irq(simfiq_irq); -+} -+ -+irqreturn_t fiq_irq_handler(int irq, void *dev_id) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)dev_id; -+ -+ if (fiq_fsm_enable) -+ dwc_otg_fiq_fsm(dwc_otg_hcd->fiq_state, dwc_otg_hcd->core_if->core_params->host_channels); -+ else -+ dwc_otg_fiq_nop(dwc_otg_hcd->fiq_state); -+ -+ return IRQ_HANDLED; -+} -+ -+#else - static struct fiq_handler fh = { - .name = "usb_fiq", - }; - -+#endif -+ - static void hcd_init_fiq(void *cookie) - { - dwc_otg_device_t *otg_dev = cookie; - dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; -+#ifdef CONFIG_ARM64 -+ int retval = 0; -+ int irq; -+#else - struct pt_regs regs; - int irq; - -@@ -430,6 +474,7 @@ static void hcd_init_fiq(void *cookie) - - // __show_regs(®s); - set_fiq_regs(®s); -+#endif - - //Set the mphi periph to the required registers - dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; -@@ -448,6 +493,23 @@ static void hcd_init_fiq(void *cookie) - DWC_WARN("MPHI periph has NOT been enabled"); - #endif - // Enable FIQ interrupt from USB peripheral -+#ifdef CONFIG_ARM64 -+ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); -+ -+ if (irq < 0) { -+ DWC_ERROR("Can't get SIM-FIQ irq"); -+ return; -+ } -+ -+ retval = request_irq(irq, fiq_irq_handler, 0, "dwc_otg_sim-fiq", dwc_otg_hcd); -+ -+ if (retval < 0) { -+ DWC_ERROR("Unable to request SIM-FIQ irq\n"); -+ return; -+ } -+ -+ simfiq_irq = irq; -+#else - #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER - irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); - #else -@@ -464,6 +526,8 @@ static void hcd_init_fiq(void *cookie) - smp_mb(); - enable_fiq(irq); - local_fiq_enable(); -+#endif -+ - } - - /** -@@ -526,6 +590,13 @@ int hcd_init(dwc_bus_dev_t *_dev) - otg_dev->hcd = dwc_otg_hcd; - otg_dev->hcd->otg_dev = otg_dev; - -+#ifdef CONFIG_ARM64 -+ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) -+ goto error2; -+ -+ if (fiq_enable) -+ hcd_init_fiq(otg_dev); -+#else - if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { - goto error2; - } -@@ -542,6 +613,7 @@ int hcd_init(dwc_bus_dev_t *_dev) - smp_call_function_single(0, hcd_init_fiq, otg_dev, 1); - } - } -+#endif - - hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); - #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) ---- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -@@ -76,8 +76,10 @@ - - #ifdef PLATFORM_INTERFACE - #include -+#ifdef CONFIG_ARM - #include - #endif -+#endif - - /** The OS page size */ - #define DWC_OS_PAGE_SIZE PAGE_SIZE diff --git a/target/linux/brcm2708/patches-4.19/950-0098-cache-export-clean-and-invalidate.patch b/target/linux/brcm2708/patches-4.19/950-0098-cache-export-clean-and-invalidate.patch new file mode 100644 index 0000000000..dad88e1728 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0098-cache-export-clean-and-invalidate.patch @@ -0,0 +1,50 @@ +From a7ca69081e7d0e1c5d84352c219b454a7977a2a4 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Fri, 25 Aug 2017 19:18:13 +0100 +Subject: [PATCH] cache: export clean and invalidate + +--- + arch/arm/mm/cache-v6.S | 4 ++-- + arch/arm/mm/cache-v7.S | 4 ++-- + 2 files changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm/mm/cache-v6.S ++++ b/arch/arm/mm/cache-v6.S +@@ -201,7 +201,7 @@ ENTRY(v6_flush_kern_dcache_area) + * - start - virtual start address of region + * - end - virtual end address of region + */ +-v6_dma_inv_range: ++ENTRY(v6_dma_inv_range) + #ifdef CONFIG_DMA_CACHE_RWFO + ldrb r2, [r0] @ read for ownership + strb r2, [r0] @ write for ownership +@@ -246,7 +246,7 @@ v6_dma_inv_range: + * - start - virtual start address of region + * - end - virtual end address of region + */ +-v6_dma_clean_range: ++ENTRY(v6_dma_clean_range) + bic r0, r0, #D_CACHE_LINE_SIZE - 1 + 1: + #ifdef CONFIG_DMA_CACHE_RWFO +--- a/arch/arm/mm/cache-v7.S ++++ b/arch/arm/mm/cache-v7.S +@@ -350,7 +350,7 @@ ENDPROC(v7_flush_kern_dcache_area) + * - start - virtual start address of region + * - end - virtual end address of region + */ +-v7_dma_inv_range: ++ENTRY(v7_dma_inv_range) + dcache_line_size r2, r3 + sub r3, r2, #1 + tst r0, r3 +@@ -380,7 +380,7 @@ ENDPROC(v7_dma_inv_range) + * - start - virtual start address of region + * - end - virtual end address of region + */ +-v7_dma_clean_range: ++ENTRY(v7_dma_clean_range) + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r0, r0, r3 diff --git a/target/linux/brcm2708/patches-4.19/950-0099-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch b/target/linux/brcm2708/patches-4.19/950-0099-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch deleted file mode 100644 index 60d80e99e1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0099-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 3a9f3c695a95d3c34a360e9a95bccce37806c952 Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Sat, 14 Jan 2017 21:43:57 -0800 -Subject: [PATCH 099/806] ARM64: Round-Robin dispatch IRQs between CPUs. - -IRQ-CPU mapping is round robined on ARM64 to increase -concurrency and allow multiple interrupts to be serviced -at a time. This reduces the need for FIQ. - -Signed-off-by: Michael Zoran ---- - drivers/irqchip/irq-bcm2835.c | 15 ++++++++++++++- - drivers/irqchip/irq-bcm2836.c | 21 +++++++++++++++++++++ - 2 files changed, 35 insertions(+), 1 deletion(-) - ---- a/drivers/irqchip/irq-bcm2835.c -+++ b/drivers/irqchip/irq-bcm2835.c -@@ -162,10 +162,23 @@ static void armctrl_unmask_irq(struct ir - } - } - -+#ifdef CONFIG_ARM64 -+void bcm2836_arm_irqchip_spin_gpu_irq(void); -+ -+static void armctrl_ack_irq(struct irq_data *d) -+{ -+ bcm2836_arm_irqchip_spin_gpu_irq(); -+} -+ -+#endif -+ - static struct irq_chip armctrl_chip = { - .name = "ARMCTRL-level", - .irq_mask = armctrl_mask_irq, -- .irq_unmask = armctrl_unmask_irq -+ .irq_unmask = armctrl_unmask_irq, -+#ifdef CONFIG_ARM64 -+ .irq_ack = armctrl_ack_irq -+#endif - }; - - static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, ---- a/drivers/irqchip/irq-bcm2836.c -+++ b/drivers/irqchip/irq-bcm2836.c -@@ -95,6 +95,27 @@ static void bcm2836_arm_irqchip_unmask_g - { - } - -+#ifdef CONFIG_ARM64 -+ -+void bcm2836_arm_irqchip_spin_gpu_irq(void) -+{ -+ u32 i; -+ void __iomem *gpurouting = (intc.base + LOCAL_GPU_ROUTING); -+ u32 routing_val = readl(gpurouting); -+ -+ for (i = 1; i <= 3; i++) { -+ u32 new_routing_val = (routing_val + i) & 3; -+ -+ if (cpu_active(new_routing_val)) { -+ writel(new_routing_val, gpurouting); -+ return; -+ } -+ } -+} -+EXPORT_SYMBOL(bcm2836_arm_irqchip_spin_gpu_irq); -+ -+#endif -+ - static struct irq_chip bcm2836_arm_irqchip_gpu = { - .name = "bcm2836-gpu", - .irq_mask = bcm2836_arm_irqchip_mask_gpu_irq, diff --git a/target/linux/brcm2708/patches-4.19/950-0099-AXI-performance-monitor-driver-2222.patch b/target/linux/brcm2708/patches-4.19/950-0099-AXI-performance-monitor-driver-2222.patch new file mode 100644 index 0000000000..02de46bdc2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0099-AXI-performance-monitor-driver-2222.patch @@ -0,0 +1,681 @@ +From b683c668fef086a8c723d55e88364405047d2196 Mon Sep 17 00:00:00 2001 +From: James Hughes +Date: Tue, 14 Nov 2017 15:13:15 +0000 +Subject: [PATCH] AXI performance monitor driver (#2222) + +Uses the debugfs I/F to provide access to the AXI +bus performance monitors. + +Requires the new mailbox peripheral access for access +to the VPU performance registers, system bus access +is done using direct register reads. + +Signed-off-by: James Hughes +--- + drivers/perf/Kconfig | 7 + + drivers/perf/Makefile | 1 + + drivers/perf/raspberrypi_axi_monitor.c | 637 +++++++++++++++++++++++++ + 3 files changed, 645 insertions(+) + create mode 100644 drivers/perf/raspberrypi_axi_monitor.c + +--- a/drivers/perf/Kconfig ++++ b/drivers/perf/Kconfig +@@ -102,4 +102,11 @@ config ARM_SPE_PMU + Extension, which provides periodic sampling of operations in + the CPU pipeline and reports this via the perf AUX interface. + ++config RPI_AXIPERF ++ depends on ARCH_BCM2835 ++ tristate "RaspberryPi AXI Performance monitors" ++ default n ++ help ++ Say y if you want to use Raspberry Pi AXI performance monitors, m if ++ you want to build it as a module. + endmenu +--- a/drivers/perf/Makefile ++++ b/drivers/perf/Makefile +@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_L2_PMU) += qcom_l2_pmu + obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o + obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o + obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o ++obj-$(CONFIG_RPI_AXIPERF) += raspberrypi_axi_monitor.o +--- /dev/null ++++ b/drivers/perf/raspberrypi_axi_monitor.c +@@ -0,0 +1,637 @@ ++/* ++ * raspberrypi_axi_monitor.c ++ * ++ * Author: james.hughes@raspberrypi.org ++ * ++ * Raspberry Pi AXI performance counters. ++ * ++ * Copyright (C) 2017 Raspberry Pi Trading Ltd. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define NUM_MONITORS 2 ++#define NUM_BUS_WATCHERS_PER_MONITOR 3 ++ ++#define SYSTEM_MONITOR 0 ++#define VPU_MONITOR 1 ++ ++#define MAX_BUSES 16 ++#define DEFAULT_SAMPLE_TIME 100 ++ ++#define NUM_BUS_WATCHER_RESULTS 9 ++ ++struct bus_watcher_data { ++ union { ++ u32 results[NUM_BUS_WATCHER_RESULTS]; ++ struct { ++ u32 atrans; ++ u32 atwait; ++ u32 amax; ++ u32 wtrans; ++ u32 wtwait; ++ u32 wmax; ++ u32 rtrans; ++ u32 rtwait; ++ u32 rmax; ++ }; ++ }; ++}; ++ ++ ++struct rpi_axiperf { ++ struct platform_device *dev; ++ struct dentry *root_folder; ++ ++ struct task_struct *monitor_thread; ++ struct mutex lock; ++ ++ struct rpi_firmware *firmware; ++ ++ /* Sample time spent on for each bus */ ++ int sample_time; ++ ++ /* Now storage for the per monitor settings and the resulting ++ * performance figures ++ */ ++ struct { ++ /* Bit field of buses we want to monitor */ ++ int bus_enabled; ++ /* Bit field of buses to filter by */ ++ int bus_filter; ++ /* The current buses being monitored on this monitor */ ++ int current_bus[NUM_BUS_WATCHERS_PER_MONITOR]; ++ /* The last bus monitored on this monitor */ ++ int last_monitored; ++ ++ /* Set true if this mailbox must use the mailbox interface ++ * rather than access registers directly. ++ */ ++ int use_mailbox_interface; ++ ++ /* Current result values */ ++ struct bus_watcher_data results[MAX_BUSES]; ++ ++ struct dentry *debugfs_entry; ++ void __iomem *base_address; ++ ++ } monitor[NUM_MONITORS]; ++ ++}; ++ ++static struct rpi_axiperf *state; ++ ++/* Two monitors, System and VPU, each with the following register sets. ++ * Each monitor can only monitor one bus at a time, so we time share them, ++ * giving each bus 100ms (default, settable via debugfs) of time on its ++ * associated monitor ++ * Record results from the three Bus watchers per monitor and push to the sysfs ++ */ ++ ++/* general registers */ ++const int GEN_CTRL; ++ ++const int GEN_CTL_ENABLE_BIT = BIT(0); ++const int GEN_CTL_RESET_BIT = BIT(1); ++ ++/* Bus watcher registers */ ++const int BW_PITCH = 0x40; ++ ++const int BW0_CTRL = 0x40; ++const int BW1_CTRL = 0x80; ++const int BW2_CTRL = 0xc0; ++ ++const int BW_ATRANS_OFFSET = 0x04; ++const int BW_ATWAIT_OFFSET = 0x08; ++const int BW_AMAX_OFFSET = 0x0c; ++const int BW_WTRANS_OFFSET = 0x10; ++const int BW_WTWAIT_OFFSET = 0x14; ++const int BW_WMAX_OFFSET = 0x18; ++const int BW_RTRANS_OFFSET = 0x1c; ++const int BW_RTWAIT_OFFSET = 0x20; ++const int BW_RMAX_OFFSET = 0x24; ++ ++const int BW_CTRL_RESET_BIT = BIT(31); ++const int BW_CTRL_ENABLE_BIT = BIT(30); ++const int BW_CTRL_ENABLE_ID_FILTER_BIT = BIT(29); ++const int BW_CTRL_LIMIT_HALT_BIT = BIT(28); ++ ++const int BW_CTRL_SOURCE_SHIFT = 8; ++const int BW_CTRL_SOURCE_MASK = GENMASK(12, 8); // 5 bits ++const int BW_CTRL_BUS_WATCH_SHIFT; ++const int BW_CTRL_BUS_WATCH_MASK = GENMASK(5, 0); // 6 bits ++const int BW_CTRL_BUS_FILTER_SHIFT = 8; ++ ++const static char *bus_filter_strings[] = { ++ "", ++ "CORE0_V", ++ "ICACHE0", ++ "DCACHE0", ++ "CORE1_V", ++ "ICACHE1", ++ "DCACHE1", ++ "L2_MAIN", ++ "HOST_PORT", ++ "HOST_PORT2", ++ "HVS", ++ "ISP", ++ "VIDEO_DCT", ++ "VIDEO_SD2AXI", ++ "CAM0", ++ "CAM1", ++ "DMA0", ++ "DMA1", ++ "DMA2_VPU", ++ "JPEG", ++ "VIDEO_CME", ++ "TRANSPOSER", ++ "VIDEO_FME", ++ "CCP2TX", ++ "USB", ++ "V3D0", ++ "V3D1", ++ "V3D2", ++ "AVE", ++ "DEBUG", ++ "CPU", ++ "M30" ++}; ++ ++const int num_bus_filters = ARRAY_SIZE(bus_filter_strings); ++ ++const static char *system_bus_string[] = { ++ "DMA_L2", ++ "TRANS", ++ "JPEG", ++ "SYSTEM_UC", ++ "DMA_UC", ++ "SYSTEM_L2", ++ "CCP2TX", ++ "MPHI_RX", ++ "MPHI_TX", ++ "HVS", ++ "H264", ++ "ISP", ++ "V3D", ++ "PERIPHERAL", ++ "CPU_UC", ++ "CPU_L2" ++}; ++ ++const int num_system_buses = ARRAY_SIZE(system_bus_string); ++ ++const static char *vpu_bus_string[] = { ++ "VPU1_D_L2", ++ "VPU0_D_L2", ++ "VPU1_I_L2", ++ "VPU0_I_L2", ++ "SYSTEM_L2", ++ "L2_FLUSH", ++ "DMA_L2", ++ "VPU1_D_UC", ++ "VPU0_D_UC", ++ "VPU1_I_UC", ++ "VPU0_I_UC", ++ "SYSTEM_UC", ++ "L2_OUT", ++ "DMA_UC", ++ "SDRAM", ++ "L2_IN" ++}; ++ ++const int num_vpu_buses = ARRAY_SIZE(vpu_bus_string); ++ ++const static char *monitor_name[] = { ++ "System", ++ "VPU" ++}; ++ ++static inline void write_reg(int monitor, int reg, u32 value) ++{ ++ writel(value, state->monitor[monitor].base_address + reg); ++} ++ ++static inline u32 read_reg(int monitor, u32 reg) ++{ ++ return readl(state->monitor[monitor].base_address + reg); ++} ++ ++static void read_bus_watcher(int monitor, int watcher, u32 *results) ++{ ++ if (state->monitor[monitor].use_mailbox_interface) { ++ /* We have 9 results, plus the overheads of start address and ++ * length So 11 u32 to define ++ */ ++ u32 tmp[11]; ++ int err; ++ ++ tmp[0] = (u32)(state->monitor[monitor].base_address + watcher ++ + BW_ATRANS_OFFSET); ++ tmp[1] = NUM_BUS_WATCHER_RESULTS; ++ ++ err = rpi_firmware_property(state->firmware, ++ RPI_FIRMWARE_GET_PERIPH_REG, ++ tmp, sizeof(tmp)); ++ ++ if (err < 0 || tmp[1] != NUM_BUS_WATCHER_RESULTS) ++ dev_err_once(&state->dev->dev, ++ "Failed to read bus watcher"); ++ else ++ memcpy(results, &tmp[2], ++ NUM_BUS_WATCHER_RESULTS * sizeof(u32)); ++ } else { ++ int i; ++ void __iomem *addr = state->monitor[monitor].base_address ++ + watcher + BW_ATRANS_OFFSET; ++ for (i = 0; i < NUM_BUS_WATCHER_RESULTS; i++, addr += 4) ++ *results++ = readl(addr); ++ } ++} ++ ++static void set_monitor_control(int monitor, u32 set) ++{ ++ if (state->monitor[monitor].use_mailbox_interface) { ++ u32 tmp[3] = {(u32)(state->monitor[monitor].base_address + ++ GEN_CTRL), 1, set}; ++ int err = rpi_firmware_property(state->firmware, ++ RPI_FIRMWARE_SET_PERIPH_REG, ++ tmp, sizeof(tmp)); ++ ++ if (err < 0 || tmp[1] != 1) ++ dev_err_once(&state->dev->dev, ++ "Failed to set monitor control"); ++ } else ++ write_reg(monitor, GEN_CTRL, set); ++} ++ ++static void set_bus_watcher_control(int monitor, int watcher, u32 set) ++{ ++ if (state->monitor[monitor].use_mailbox_interface) { ++ u32 tmp[3] = {(u32)(state->monitor[monitor].base_address + ++ watcher), 1, set}; ++ int err = rpi_firmware_property(state->firmware, ++ RPI_FIRMWARE_SET_PERIPH_REG, ++ tmp, sizeof(tmp)); ++ if (err < 0 || tmp[1] != 1) ++ dev_err_once(&state->dev->dev, ++ "Failed to set bus watcher control"); ++ } else ++ write_reg(monitor, watcher, set); ++} ++ ++static void monitor(struct rpi_axiperf *state) ++{ ++ int monitor, num_buses[NUM_MONITORS]; ++ ++ mutex_lock(&state->lock); ++ ++ for (monitor = 0; monitor < NUM_MONITORS; monitor++) { ++ typeof(state->monitor[0]) *mon = &(state->monitor[monitor]); ++ ++ /* Anything enabled? */ ++ if (mon->bus_enabled == 0) { ++ /* No, disable all monitoring for this monitor */ ++ set_monitor_control(monitor, GEN_CTL_RESET_BIT); ++ } else { ++ int i; ++ ++ /* Find out how many busses we want to monitor, and ++ * spread our 3 actual monitors over them ++ */ ++ num_buses[monitor] = hweight32(mon->bus_enabled); ++ num_buses[monitor] = min(num_buses[monitor], ++ NUM_BUS_WATCHERS_PER_MONITOR); ++ ++ for (i = 0; i < num_buses[monitor]; i++) { ++ int bus_control; ++ ++ do { ++ mon->last_monitored++; ++ mon->last_monitored &= 0xf; ++ } while ((mon->bus_enabled & ++ (1 << mon->last_monitored)) == 0); ++ ++ mon->current_bus[i] = mon->last_monitored; ++ ++ /* Reset the counters */ ++ set_bus_watcher_control(monitor, ++ BW0_CTRL + ++ i*BW_PITCH, ++ BW_CTRL_RESET_BIT); ++ ++ bus_control = BW_CTRL_ENABLE_BIT | ++ mon->current_bus[i]; ++ ++ if (mon->bus_filter) { ++ bus_control |= ++ BW_CTRL_ENABLE_ID_FILTER_BIT; ++ bus_control |= ++ ((mon->bus_filter & 0x1f) ++ << BW_CTRL_BUS_FILTER_SHIFT); ++ } ++ ++ // Start capture ++ set_bus_watcher_control(monitor, ++ BW0_CTRL + i*BW_PITCH, ++ bus_control); ++ } ++ } ++ ++ /* start monitoring */ ++ set_monitor_control(monitor, GEN_CTL_ENABLE_BIT); ++ } ++ ++ mutex_unlock(&state->lock); ++ ++ msleep(state->sample_time); ++ ++ /* Now read the results */ ++ ++ mutex_lock(&state->lock); ++ for (monitor = 0; monitor < NUM_MONITORS; monitor++) { ++ typeof(state->monitor[0]) *mon = &(state->monitor[monitor]); ++ ++ /* Anything enabled? */ ++ if (mon->bus_enabled == 0) { ++ /* No, disable all monitoring for this monitor */ ++ set_monitor_control(monitor, 0); ++ } else { ++ int i; ++ ++ for (i = 0; i < num_buses[monitor]; i++) { ++ int bus = mon->current_bus[i]; ++ ++ read_bus_watcher(monitor, ++ BW0_CTRL + i*BW_PITCH, ++ (u32 *)&mon->results[bus].results); ++ } ++ } ++ } ++ mutex_unlock(&state->lock); ++} ++ ++static int monitor_thread(void *data) ++{ ++ struct rpi_axiperf *state = data; ++ ++ while (1) { ++ monitor(state); ++ ++ if (kthread_should_stop()) ++ return 0; ++ } ++ return 0; ++} ++ ++static ssize_t myreader(struct file *fp, char __user *user_buffer, ++ size_t count, loff_t *position) ++{ ++#define INIT_BUFF_SIZE 2048 ++ ++ int i; ++ int idx = (int)(fp->private_data); ++ int num_buses, cnt; ++ char *string_buffer; ++ int buff_size = INIT_BUFF_SIZE; ++ char *p; ++ typeof(state->monitor[0]) *mon = &(state->monitor[idx]); ++ ++ if (idx < 0 || idx > NUM_MONITORS) ++ idx = 0; ++ ++ num_buses = idx == SYSTEM_MONITOR ? num_system_buses : num_vpu_buses; ++ ++ string_buffer = kmalloc(buff_size, GFP_KERNEL); ++ ++ if (!string_buffer) { ++ dev_err(&state->dev->dev, ++ "Failed temporary string allocation\n"); ++ return 0; ++ } ++ ++ p = string_buffer; ++ ++ mutex_lock(&state->lock); ++ ++ if (mon->bus_filter) { ++ int filt = min(mon->bus_filter & 0x1f, num_bus_filters); ++ ++ cnt = snprintf(p, buff_size, ++ "\nMonitoring transactions from %s only\n", ++ bus_filter_strings[filt]); ++ p += cnt; ++ buff_size -= cnt; ++ } ++ ++ cnt = snprintf(p, buff_size, " Bus | Atrans Atwait AMax Wtrans Wtwait WMax Rtrans Rtwait RMax\n" ++ "======================================================================================================\n"); ++ ++ if (cnt >= buff_size) ++ goto done; ++ ++ p += cnt; ++ buff_size -= cnt; ++ ++ for (i = 0; i < num_buses; i++) { ++ if (mon->bus_enabled & (1 << i)) { ++#define DIVIDER (1024) ++ typeof(mon->results[0]) *res = &(mon->results[i]); ++ ++ cnt = snprintf(p, buff_size, ++ "%10s | %8uK %8uK %8uK %8uK %8uK %8uK %8uK %8uK %8uK\n", ++ idx == SYSTEM_MONITOR ? ++ system_bus_string[i] : ++ vpu_bus_string[i], ++ res->atrans/DIVIDER, ++ res->atwait/DIVIDER, ++ res->amax/DIVIDER, ++ res->wtrans/DIVIDER, ++ res->wtwait/DIVIDER, ++ res->wmax/DIVIDER, ++ res->rtrans/DIVIDER, ++ res->rtwait/DIVIDER, ++ res->rmax/DIVIDER ++ ); ++ if (cnt >= buff_size) ++ goto done; ++ ++ p += cnt; ++ buff_size -= cnt; ++ } ++ } ++ ++ mutex_unlock(&state->lock); ++ ++done: ++ ++ /* did the last string entry exceeed our buffer size? ie out of string ++ * buffer space. Null terminate, use what we have. ++ */ ++ if (cnt >= buff_size) { ++ buff_size = 0; ++ string_buffer[INIT_BUFF_SIZE] = 0; ++ } ++ ++ cnt = simple_read_from_buffer(user_buffer, count, position, ++ string_buffer, ++ INIT_BUFF_SIZE - buff_size); ++ ++ kfree(string_buffer); ++ ++ return cnt; ++} ++ ++static ssize_t mywriter(struct file *fp, const char __user *user_buffer, ++ size_t count, loff_t *position) ++{ ++ int idx = (int)(fp->private_data); ++ ++ if (idx < 0 || idx > NUM_MONITORS) ++ idx = 0; ++ ++ /* At the moment, this does nothing, but in the future it could be ++ * used to reset counters etc ++ */ ++ return count; ++} ++ ++static const struct file_operations fops_debug = { ++ .read = myreader, ++ .write = mywriter, ++ .open = simple_open ++}; ++ ++static int rpi_axiperf_probe(struct platform_device *pdev) ++{ ++ int ret = 0, i; ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct device_node *fw_node; ++ ++ state = kzalloc(sizeof(struct rpi_axiperf), GFP_KERNEL); ++ if (!state) ++ return -ENOMEM; ++ ++ /* Get the firmware handle for future rpi-firmware-xxx calls */ ++ fw_node = of_parse_phandle(np, "firmware", 0); ++ if (!fw_node) { ++ dev_err(dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ state->firmware = rpi_firmware_get(fw_node); ++ if (!state->firmware) ++ return -EPROBE_DEFER; ++ ++ /* Special case for the VPU monitor, we must use the mailbox interface ++ * as it is not accessible from the ARM address space. ++ */ ++ state->monitor[VPU_MONITOR].use_mailbox_interface = 1; ++ state->monitor[SYSTEM_MONITOR].use_mailbox_interface = 0; ++ ++ for (i = 0; i < NUM_MONITORS; i++) { ++ if (state->monitor[i].use_mailbox_interface) { ++ of_property_read_u32_index(np, "reg", i*2, ++ (u32 *)(&state->monitor[i].base_address)); ++ } else { ++ struct resource *resource = ++ platform_get_resource(pdev, IORESOURCE_MEM, i); ++ ++ state->monitor[i].base_address = ++ devm_ioremap_resource(&pdev->dev, resource); ++ } ++ ++ if (IS_ERR(state->monitor[i].base_address)) ++ return PTR_ERR(state->monitor[i].base_address); ++ ++ /* Enable all buses by default */ ++ state->monitor[i].bus_enabled = 0xffff; ++ } ++ ++ state->dev = pdev; ++ platform_set_drvdata(pdev, state); ++ ++ state->sample_time = DEFAULT_SAMPLE_TIME; ++ ++ /* Set up all the debugfs stuff */ ++ state->root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL); ++ ++ for (i = 0; i < NUM_MONITORS; i++) { ++ state->monitor[i].debugfs_entry = ++ debugfs_create_dir(monitor_name[i], state->root_folder); ++ if (IS_ERR(state->monitor[i].debugfs_entry)) ++ state->monitor[i].debugfs_entry = NULL; ++ ++ debugfs_create_file("data", 0444, ++ state->monitor[i].debugfs_entry, ++ (void *)i, &fops_debug); ++ debugfs_create_u32("enable", 0644, ++ state->monitor[i].debugfs_entry, ++ &state->monitor[i].bus_enabled); ++ debugfs_create_u32("filter", 0644, ++ state->monitor[i].debugfs_entry, ++ &state->monitor[i].bus_filter); ++ debugfs_create_u32("sample_time", 0644, ++ state->monitor[i].debugfs_entry, ++ &state->sample_time); ++ } ++ ++ mutex_init(&state->lock); ++ ++ state->monitor_thread = kthread_run(monitor_thread, state, ++ "rpi-axiperfmon"); ++ ++ return ret; ++ ++} ++ ++static int rpi_axiperf_remove(struct platform_device *dev) ++{ ++ int ret = 0; ++ ++ kthread_stop(state->monitor_thread); ++ ++ debugfs_remove_recursive(state->root_folder); ++ state->root_folder = NULL; ++ ++ return ret; ++} ++ ++static const struct of_device_id rpi_axiperf_match[] = { ++ { ++ .compatible = "brcm,bcm2835-axiperf", ++ }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rpi_axiperf_match); ++ ++static struct platform_driver rpi_axiperf_driver = { ++ .probe = rpi_axiperf_probe, ++ .remove = rpi_axiperf_remove, ++ .driver = { ++ .name = "rpi-bcm2835-axiperf", ++ .of_match_table = of_match_ptr(rpi_axiperf_match), ++ }, ++}; ++ ++module_platform_driver(rpi_axiperf_driver); ++ ++/* Module information */ ++MODULE_AUTHOR("James Hughes "); ++MODULE_DESCRIPTION("RPI AXI Performance monitor driver"); ++MODULE_LICENSE("GPL"); ++ diff --git a/target/linux/brcm2708/patches-4.19/950-0100-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch b/target/linux/brcm2708/patches-4.19/950-0100-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch deleted file mode 100644 index 912ab3fc09..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0100-ARM64-Force-hardware-emulation-of-deprecated-instruc.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 61f4a666499f781e6441dab84993a635c43ddb58 Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Sat, 11 Feb 2017 01:18:31 -0800 -Subject: [PATCH 100/806] ARM64: Force hardware emulation of deprecated - instructions. - ---- - arch/arm64/kernel/armv8_deprecated.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm64/kernel/armv8_deprecated.c -+++ b/arch/arm64/kernel/armv8_deprecated.c -@@ -185,10 +185,15 @@ static void __init register_insn_emulati - - switch (ops->status) { - case INSN_DEPRECATED: -+#if 0 - insn->current_mode = INSN_EMULATE; - /* Disable the HW mode if it was turned on at early boot time */ - run_all_cpu_set_hw_mode(insn, false); -+#else -+ insn->current_mode = INSN_HW; -+ run_all_cpu_set_hw_mode(insn, true); - insn->max = INSN_HW; -+#endif - break; - case INSN_OBSOLETE: - insn->current_mode = INSN_UNDEF; diff --git a/target/linux/brcm2708/patches-4.19/950-0100-mcp2515-Use-DT-supplied-interrupt-flags.patch b/target/linux/brcm2708/patches-4.19/950-0100-mcp2515-Use-DT-supplied-interrupt-flags.patch new file mode 100644 index 0000000000..13f97962f9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0100-mcp2515-Use-DT-supplied-interrupt-flags.patch @@ -0,0 +1,36 @@ +From 612a3f0adcf98854dcbe8228551b941b76c6af2c Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 14 Nov 2017 11:03:22 +0000 +Subject: [PATCH] mcp2515: Use DT-supplied interrupt flags + +The MCP2515 datasheet clearly describes a level-triggered interrupt +pin. Therefore the receiving interrupt controller must also be +configured for level-triggered operation otherwise there is a danger +of a missed interrupt condition blocking all subsequent interrupts. +The ONESHOT flag ensures that the interrupt is masked until the +threaded interrupt handler exits. + +Rather than change the flags globally (they must have worked for at +least one user), allow the flags to be overridden from Device Tree +in the event that the device has a DT node. + +See: https://github.com/raspberrypi/linux/issues/2175 + https://github.com/raspberrypi/linux/issues/2263 + +Signed-off-by: Phil Elwell +--- + drivers/net/can/spi/mcp251x.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/net/can/spi/mcp251x.c ++++ b/drivers/net/can/spi/mcp251x.c +@@ -948,6 +948,9 @@ static int mcp251x_open(struct net_devic + priv->tx_skb = NULL; + priv->tx_len = 0; + ++ if (spi->dev.of_node) ++ flags = 0; ++ + ret = request_threaded_irq(spi->irq, NULL, mcp251x_can_ist, + flags | IRQF_ONESHOT, DEVICE_NAME, priv); + if (ret) { diff --git a/target/linux/brcm2708/patches-4.19/950-0101-Tidy-up-of-the-ft5406-driver-to-use-DT-2189.patch b/target/linux/brcm2708/patches-4.19/950-0101-Tidy-up-of-the-ft5406-driver-to-use-DT-2189.patch new file mode 100644 index 0000000000..1709d4d959 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0101-Tidy-up-of-the-ft5406-driver-to-use-DT-2189.patch @@ -0,0 +1,382 @@ +From 67acc12c996ef55038206de9e4220e69bf8dd517 Mon Sep 17 00:00:00 2001 +From: James Hughes +Date: Thu, 16 Nov 2017 15:56:17 +0000 +Subject: [PATCH] Tidy up of the ft5406 driver to use DT (#2189) + +Driver was using a fixed resolution, this commit +adds touchscreen size, and coordinate flip and swap +features via device tree overlays. + +Adds overrides so the VC4 can adjust the DT parameters +appropriately; there is a newer version of the VC4 side +driver that can now set up the appropriate DT values +if required. + +Signed-off-by: James Hughes +--- + drivers/input/touchscreen/rpi-ft5406.c | 218 ++++++++++++++++--------- + 1 file changed, 145 insertions(+), 73 deletions(-) + +--- a/drivers/input/touchscreen/rpi-ft5406.c ++++ b/drivers/input/touchscreen/rpi-ft5406.c +@@ -1,7 +1,7 @@ + /* + * Driver for memory based ft5406 touchscreen + * +- * Copyright (C) 2015 Raspberry Pi ++ * Copyright (C) 2015, 2017 Raspberry Pi + * + * + * This program is free software; you can redistribute it and/or modify +@@ -9,7 +9,6 @@ + * published by the Free Software Foundation. + */ + +- + #include + #include + #include +@@ -21,11 +20,15 @@ + #include + #include + #include +-#include ++#include + #include + #include + + #define MAXIMUM_SUPPORTED_POINTS 10 ++#define FTS_TOUCH_DOWN 0 ++#define FTS_TOUCH_UP 1 ++#define FTS_TOUCH_CONTACT 2 ++ + struct ft5406_regs { + uint8_t device_mode; + uint8_t gesture_id; +@@ -35,85 +38,125 @@ struct ft5406_regs { + uint8_t xl; + uint8_t yh; + uint8_t yl; +- uint8_t res1; +- uint8_t res2; ++ uint8_t pressure; /* Not supported */ ++ uint8_t area; /* Not supported */ + } point[MAXIMUM_SUPPORTED_POINTS]; + }; + +-#define SCREEN_WIDTH 800 +-#define SCREEN_HEIGHT 480 ++/* These are defaults if the DT entries are missing */ ++#define DEFAULT_SCREEN_WIDTH 800 ++#define DEFAULT_SCREEN_HEIGHT 480 + + struct ft5406 { +- struct platform_device * pdev; +- struct input_dev * input_dev; +- void __iomem * ts_base; +- dma_addr_t bus_addr; +- struct task_struct * thread; ++ struct platform_device *pdev; ++ struct input_dev *input_dev; ++ void __iomem *ts_base; ++ dma_addr_t bus_addr; ++ struct task_struct *thread; ++ ++ uint16_t max_x; ++ uint16_t max_y; ++ uint8_t hflip; ++ uint8_t vflip; ++ uint8_t xyswap; + }; + + /* Thread to poll for touchscreen events +- * ++ * + * This thread polls the memory based register copy of the ft5406 registers + * using the number of points register to know whether the copy has been +- * updated (we write 99 to the memory copy, the GPU will write between ++ * updated (we write 99 to the memory copy, the GPU will write between + * 0 - 10 points) + */ ++#define ID_TO_BIT(a) (1 << a) ++ + static int ft5406_thread(void *arg) + { + struct ft5406 *ts = (struct ft5406 *) arg; + struct ft5406_regs regs; + int known_ids = 0; +- +- while(!kthread_should_stop()) +- { +- // 60fps polling ++ ++ while (!kthread_should_stop()) { ++ /* 60fps polling */ + msleep_interruptible(17); + memcpy_fromio(®s, ts->ts_base, sizeof(struct ft5406_regs)); +- iowrite8(99, ts->ts_base + offsetof(struct ft5406_regs, num_points)); +- // Do not output if theres no new information (num_points is 99) +- // or we have no touch points and don't need to release any +- if(!(regs.num_points == 99 || (regs.num_points == 0 && known_ids == 0))) +- { ++ iowrite8(99, ++ ts->ts_base + ++ offsetof(struct ft5406_regs, num_points)); ++ ++ /* ++ * Do not output if theres no new information (num_points is 99) ++ * or we have no touch points and don't need to release any ++ */ ++ if (!(regs.num_points == 99 || ++ (regs.num_points == 0 && known_ids == 0))) { + int i; + int modified_ids = 0, released_ids; +- for(i = 0; i < regs.num_points; i++) +- { +- int x = (((int) regs.point[i].xh & 0xf) << 8) + regs.point[i].xl; +- int y = (((int) regs.point[i].yh & 0xf) << 8) + regs.point[i].yl; +- int touchid = (regs.point[i].yh >> 4) & 0xf; +- +- modified_ids |= 1 << touchid; + +- if(!((1 << touchid) & known_ids)) +- dev_dbg(&ts->pdev->dev, "x = %d, y = %d, touchid = %d\n", x, y, touchid); +- +- input_mt_slot(ts->input_dev, touchid); +- input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 1); ++ for (i = 0; i < regs.num_points; i++) { ++ int x = (((int) regs.point[i].xh & 0xf) << 8) + ++ regs.point[i].xl; ++ int y = (((int) regs.point[i].yh & 0xf) << 8) + ++ regs.point[i].yl; ++ int touchid = (regs.point[i].yh >> 4) & 0xf; ++ int event_type = (regs.point[i].xh >> 6) & 0x03; + +- input_report_abs(ts->input_dev, ABS_MT_POSITION_X, x); +- input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, y); ++ modified_ids |= ID_TO_BIT(touchid); + ++ if (event_type == FTS_TOUCH_DOWN || ++ event_type == FTS_TOUCH_CONTACT) { ++ if (ts->hflip) ++ x = ts->max_x - 1 - x; ++ ++ if (ts->vflip) ++ y = ts->max_y - 1 - y; ++ ++ if (ts->xyswap) ++ swap(x, y); ++ ++ if (!((ID_TO_BIT(touchid)) & known_ids)) ++ dev_dbg(&ts->pdev->dev, ++ "x = %d, y = %d, press = %d, touchid = %d\n", ++ x, y, ++ regs.point[i].pressure, ++ touchid); ++ ++ input_mt_slot(ts->input_dev, touchid); ++ input_mt_report_slot_state( ++ ts->input_dev, ++ MT_TOOL_FINGER, ++ 1); ++ ++ input_report_abs(ts->input_dev, ++ ABS_MT_POSITION_X, x); ++ input_report_abs(ts->input_dev, ++ ABS_MT_POSITION_Y, y); ++ } + } + + released_ids = known_ids & ~modified_ids; +- for(i = 0; released_ids && i < MAXIMUM_SUPPORTED_POINTS; i++) +- { +- if(released_ids & (1<pdev->dev, "Released %d, known = %x modified = %x\n", i, known_ids, modified_ids); ++ for (i = 0; ++ released_ids && i < MAXIMUM_SUPPORTED_POINTS; ++ i++) { ++ if (released_ids & (1<pdev->dev, ++ "Released %d, known = %x, modified = %x\n", ++ i, known_ids, modified_ids); + input_mt_slot(ts->input_dev, i); +- input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 0); +- modified_ids &= ~(1 << i); ++ input_mt_report_slot_state( ++ ts->input_dev, ++ MT_TOOL_FINGER, ++ 0); ++ modified_ids &= ~(ID_TO_BIT(i)); + } + } + known_ids = modified_ids; +- ++ + input_mt_report_pointer_emulation(ts->input_dev, true); + input_sync(ts->input_dev); + } +- + } +- ++ + return 0; + } + +@@ -122,13 +165,14 @@ static int ft5406_probe(struct platform_ + int err = 0; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; +- struct ft5406 * ts; ++ struct ft5406 *ts; + struct device_node *fw_node; + struct rpi_firmware *fw; + u32 touchbuf; +- ++ u32 val; ++ + dev_info(dev, "Probing device\n"); +- ++ + fw_node = of_parse_phandle(np, "firmware", 0); + if (!fw_node) { + dev_err(dev, "Missing firmware node\n"); +@@ -151,7 +195,8 @@ static int ft5406_probe(struct platform_ + return -ENOMEM; + } + +- ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr, GFP_KERNEL); ++ ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr, ++ GFP_KERNEL); + if (!ts->ts_base) { + pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n", + __func__, PAGE_SIZE); +@@ -164,17 +209,22 @@ static int ft5406_probe(struct platform_ + &touchbuf, sizeof(touchbuf)); + + if (err || touchbuf != 0) { +- dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n", err); ++ dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n", ++ err); + dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); + ts->ts_base = 0; + ts->bus_addr = 0; + } + + if (!ts->ts_base) { +- dev_warn(dev, "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", err, touchbuf, ts->ts_base, ts->bus_addr); +- +- err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF, +- &touchbuf, sizeof(touchbuf)); ++ dev_warn(dev, ++ "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", ++ err, touchbuf, ts->ts_base, ts->bus_addr); ++ ++ err = rpi_firmware_property( ++ fw, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF, ++ &touchbuf, sizeof(touchbuf)); + if (err) { + dev_err(dev, "Failed to get touch buffer\n"); + goto out; +@@ -188,11 +238,10 @@ static int ft5406_probe(struct platform_ + + dev_dbg(dev, "Got TS buffer 0x%x\n", touchbuf); + +- // mmap the physical memory ++ /* mmap the physical memory */ + touchbuf &= ~0xc0000000; + ts->ts_base = ioremap(touchbuf, sizeof(struct ft5406_regs)); +- if (ts->ts_base == NULL) +- { ++ if (ts->ts_base == NULL) { + dev_err(dev, "Failed to map physical address\n"); + err = -ENOMEM; + goto out; +@@ -200,22 +249,46 @@ static int ft5406_probe(struct platform_ + } + platform_set_drvdata(pdev, ts); + ts->pdev = pdev; +- ++ + ts->input_dev->name = "FT5406 memory based driver"; +- ++ ++ if (of_property_read_u32(np, "touchscreen-size-x", &val) >= 0) ++ ts->max_x = val; ++ else ++ ts->max_x = DEFAULT_SCREEN_WIDTH; ++ ++ if (of_property_read_u32(np, "touchscreen-size-y", &val) >= 0) ++ ts->max_y = val; ++ else ++ ts->max_y = DEFAULT_SCREEN_HEIGHT; ++ ++ if (of_property_read_u32(np, "touchscreen-inverted-x", &val) >= 0) ++ ts->hflip = val; ++ ++ if (of_property_read_u32(np, "touchscreen-inverted-y", &val) >= 0) ++ ts->vflip = val; ++ ++ if (of_property_read_u32(np, "touchscreen-swapped-x-y", &val) >= 0) ++ ts->xyswap = val; ++ ++ dev_dbg(dev, ++ "Touchscreen parameters (%d,%d), hflip=%d, vflip=%d, xyswap=%d", ++ ts->max_x, ts->max_y, ts->hflip, ts->vflip, ts->xyswap); ++ + __set_bit(EV_KEY, ts->input_dev->evbit); + __set_bit(EV_SYN, ts->input_dev->evbit); + __set_bit(EV_ABS, ts->input_dev->evbit); + + input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0, +- SCREEN_WIDTH, 0, 0); ++ ts->xyswap ? ts->max_y : ts->max_x, 0, 0); + input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0, +- SCREEN_HEIGHT, 0, 0); ++ ts->xyswap ? ts->max_x : ts->max_y, 0, 0); + +- input_mt_init_slots(ts->input_dev, MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT); ++ input_mt_init_slots(ts->input_dev, ++ MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT); + + input_set_drvdata(ts->input_dev, ts); +- ++ + err = input_register_device(ts->input_dev); + if (err) { + dev_err(dev, "could not register input device, %d\n", +@@ -223,10 +296,9 @@ static int ft5406_probe(struct platform_ + goto out; + } + +- // create thread to poll the touch events ++ /* create thread that polls the touch events */ + ts->thread = kthread_run(ft5406_thread, ts, "ft5406"); +- if(ts->thread == NULL) +- { ++ if (ts->thread == NULL) { + dev_err(dev, "Failed to create kernel thread"); + err = -ENOMEM; + goto out; +@@ -254,9 +326,9 @@ static int ft5406_remove(struct platform + { + struct device *dev = &pdev->dev; + struct ft5406 *ts = (struct ft5406 *) platform_get_drvdata(pdev); +- ++ + dev_info(dev, "Removing rpi-ft5406\n"); +- ++ + kthread_stop(ts->thread); + + if (ts->bus_addr) +@@ -265,7 +337,7 @@ static int ft5406_remove(struct platform + iounmap(ts->ts_base); + if (ts->input_dev) + input_unregister_device(ts->input_dev); +- ++ + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0101-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch b/target/linux/brcm2708/patches-4.19/950-0101-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch deleted file mode 100644 index c69287d051..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0101-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 8333b8d6ed55d08e410afb7c9036f8a8e9186e69 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Fri, 10 Feb 2017 17:57:08 -0800 -Subject: [PATCH 101/806] build/arm64: Add rules for .dtbo files for dts - overlays - -We now create overlays as .dtbo files. - -Signed-off-by: Khem Raj ---- - arch/arm64/Makefile | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/arm64/Makefile -+++ b/arch/arm64/Makefile -@@ -131,6 +131,9 @@ zinstall install: - %.dtb: scripts - $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ - -+%.dtbo: | scripts -+ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ -+ - PHONY += dtbs dtbs_install - - dtbs: prepare scripts diff --git a/target/linux/brcm2708/patches-4.19/950-0102-cache-export-clean-and-invalidate.patch b/target/linux/brcm2708/patches-4.19/950-0102-cache-export-clean-and-invalidate.patch deleted file mode 100644 index 1b368ce6a2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0102-cache-export-clean-and-invalidate.patch +++ /dev/null @@ -1,50 +0,0 @@ -From a7ca69081e7d0e1c5d84352c219b454a7977a2a4 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Fri, 25 Aug 2017 19:18:13 +0100 -Subject: [PATCH 102/806] cache: export clean and invalidate - ---- - arch/arm/mm/cache-v6.S | 4 ++-- - arch/arm/mm/cache-v7.S | 4 ++-- - 2 files changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm/mm/cache-v6.S -+++ b/arch/arm/mm/cache-v6.S -@@ -201,7 +201,7 @@ ENTRY(v6_flush_kern_dcache_area) - * - start - virtual start address of region - * - end - virtual end address of region - */ --v6_dma_inv_range: -+ENTRY(v6_dma_inv_range) - #ifdef CONFIG_DMA_CACHE_RWFO - ldrb r2, [r0] @ read for ownership - strb r2, [r0] @ write for ownership -@@ -246,7 +246,7 @@ v6_dma_inv_range: - * - start - virtual start address of region - * - end - virtual end address of region - */ --v6_dma_clean_range: -+ENTRY(v6_dma_clean_range) - bic r0, r0, #D_CACHE_LINE_SIZE - 1 - 1: - #ifdef CONFIG_DMA_CACHE_RWFO ---- a/arch/arm/mm/cache-v7.S -+++ b/arch/arm/mm/cache-v7.S -@@ -350,7 +350,7 @@ ENDPROC(v7_flush_kern_dcache_area) - * - start - virtual start address of region - * - end - virtual end address of region - */ --v7_dma_inv_range: -+ENTRY(v7_dma_inv_range) - dcache_line_size r2, r3 - sub r3, r2, #1 - tst r0, r3 -@@ -380,7 +380,7 @@ ENDPROC(v7_dma_inv_range) - * - start - virtual start address of region - * - end - virtual end address of region - */ --v7_dma_clean_range: -+ENTRY(v7_dma_clean_range) - dcache_line_size r2, r3 - sub r3, r2, #1 - bic r0, r0, r3 diff --git a/target/linux/brcm2708/patches-4.19/950-0102-cgroup-Disable-cgroup-memory-by-default.patch b/target/linux/brcm2708/patches-4.19/950-0102-cgroup-Disable-cgroup-memory-by-default.patch new file mode 100644 index 0000000000..f08cbebc47 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0102-cgroup-Disable-cgroup-memory-by-default.patch @@ -0,0 +1,70 @@ +From 7ae6ba03434344f90403936ae79bfd7ba005b49c Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 27 Nov 2017 17:14:54 +0000 +Subject: [PATCH] cgroup: Disable cgroup "memory" by default + +Some Raspberry Pis have limited RAM and most users won't use the +cgroup memory support so it is disabled by default. Enable with: + + cgroup_enable=memory + +See: https://github.com/raspberrypi/linux/issues/1950 + +Signed-off-by: Phil Elwell +--- + kernel/cgroup/cgroup.c | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +--- a/kernel/cgroup/cgroup.c ++++ b/kernel/cgroup/cgroup.c +@@ -5334,6 +5334,8 @@ int __init cgroup_init_early(void) + } + + static u16 cgroup_disable_mask __initdata; ++static u16 cgroup_enable_mask __initdata; ++static int __init cgroup_disable(char *str); + + /** + * cgroup_init - cgroup initialization +@@ -5374,6 +5376,12 @@ int __init cgroup_init(void) + + mutex_unlock(&cgroup_mutex); + ++ /* Apply an implicit disable... */ ++ cgroup_disable("memory"); ++ ++ /* ...knowing that an explicit enable will override it. */ ++ cgroup_disable_mask &= ~cgroup_enable_mask; ++ + for_each_subsys(ss, ssid) { + if (ss->early_init) { + struct cgroup_subsys_state *css = +@@ -5765,6 +5773,28 @@ static int __init cgroup_disable(char *s + } + __setup("cgroup_disable=", cgroup_disable); + ++static int __init cgroup_enable(char *str) ++{ ++ struct cgroup_subsys *ss; ++ char *token; ++ int i; ++ ++ while ((token = strsep(&str, ",")) != NULL) { ++ if (!*token) ++ continue; ++ ++ for_each_subsys(ss, i) { ++ if (strcmp(token, ss->name) && ++ strcmp(token, ss->legacy_name)) ++ continue; ++ ++ cgroup_enable_mask |= 1 << i; ++ } ++ } ++ return 1; ++} ++__setup("cgroup_enable=", cgroup_enable); ++ + /** + * css_tryget_online_from_dir - get corresponding css from a cgroup dentry + * @dentry: directory dentry of interest diff --git a/target/linux/brcm2708/patches-4.19/950-0103-ARM-bcm2835-Set-Serial-number-and-Revision.patch b/target/linux/brcm2708/patches-4.19/950-0103-ARM-bcm2835-Set-Serial-number-and-Revision.patch new file mode 100644 index 0000000000..b0e4152fc4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0103-ARM-bcm2835-Set-Serial-number-and-Revision.patch @@ -0,0 +1,63 @@ +From 6eb5a426229447a1045507fb63afdb11ddc5eda4 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Wed, 3 Jun 2015 12:26:13 +0200 +Subject: [PATCH] ARM: bcm2835: Set Serial number and Revision +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The VideoCore bootloader passes in Serial number and +Revision number through Device Tree. Make these available to +userspace through /proc/cpuinfo. + +Mainline status: + +There is a commit in linux-next that standardize passing the serial +number through Device Tree (string: /serial-number): +ARM: 8355/1: arch: Show the serial number from devicetree in cpuinfo + +There was an attempt to do the same with the revision number, but it +didn't get in: +[PATCH v2 1/2] arm: devtree: Set system_rev from DT revision + +Signed-off-by: Noralf Trønnes +--- + arch/arm/mach-bcm/board_bcm2835.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +--- a/arch/arm/mach-bcm/board_bcm2835.c ++++ b/arch/arm/mach-bcm/board_bcm2835.c +@@ -15,12 +15,25 @@ + #include + #include + #include ++#include + + #include + #include + + #include "platsmp.h" + ++static void __init bcm2835_init(void) ++{ ++ struct device_node *np = of_find_node_by_path("/system"); ++ u32 val; ++ u64 val64; ++ ++ if (!of_property_read_u32(np, "linux,revision", &val)) ++ system_rev = val; ++ if (!of_property_read_u64(np, "linux,serial", &val64)) ++ system_serial_low = val64; ++} ++ + static const char * const bcm2835_compat[] = { + #ifdef CONFIG_ARCH_MULTI_V6 + "brcm,bcm2835", +@@ -33,6 +46,7 @@ static const char * const bcm2835_compat + }; + + DT_MACHINE_START(BCM2835, "BCM2835") ++ .init_machine = bcm2835_init, + .dt_compat = bcm2835_compat, + .smp = smp_ops(bcm2836_smp_ops), + MACHINE_END diff --git a/target/linux/brcm2708/patches-4.19/950-0103-AXI-performance-monitor-driver-2222.patch b/target/linux/brcm2708/patches-4.19/950-0103-AXI-performance-monitor-driver-2222.patch deleted file mode 100644 index e39279679f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0103-AXI-performance-monitor-driver-2222.patch +++ /dev/null @@ -1,681 +0,0 @@ -From b683c668fef086a8c723d55e88364405047d2196 Mon Sep 17 00:00:00 2001 -From: James Hughes -Date: Tue, 14 Nov 2017 15:13:15 +0000 -Subject: [PATCH 103/806] AXI performance monitor driver (#2222) - -Uses the debugfs I/F to provide access to the AXI -bus performance monitors. - -Requires the new mailbox peripheral access for access -to the VPU performance registers, system bus access -is done using direct register reads. - -Signed-off-by: James Hughes ---- - drivers/perf/Kconfig | 7 + - drivers/perf/Makefile | 1 + - drivers/perf/raspberrypi_axi_monitor.c | 637 +++++++++++++++++++++++++ - 3 files changed, 645 insertions(+) - create mode 100644 drivers/perf/raspberrypi_axi_monitor.c - ---- a/drivers/perf/Kconfig -+++ b/drivers/perf/Kconfig -@@ -102,4 +102,11 @@ config ARM_SPE_PMU - Extension, which provides periodic sampling of operations in - the CPU pipeline and reports this via the perf AUX interface. - -+config RPI_AXIPERF -+ depends on ARCH_BCM2835 -+ tristate "RaspberryPi AXI Performance monitors" -+ default n -+ help -+ Say y if you want to use Raspberry Pi AXI performance monitors, m if -+ you want to build it as a module. - endmenu ---- a/drivers/perf/Makefile -+++ b/drivers/perf/Makefile -@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_L2_PMU) += qcom_l2_pmu - obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o - obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o - obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o -+obj-$(CONFIG_RPI_AXIPERF) += raspberrypi_axi_monitor.o ---- /dev/null -+++ b/drivers/perf/raspberrypi_axi_monitor.c -@@ -0,0 +1,637 @@ -+/* -+ * raspberrypi_axi_monitor.c -+ * -+ * Author: james.hughes@raspberrypi.org -+ * -+ * Raspberry Pi AXI performance counters. -+ * -+ * Copyright (C) 2017 Raspberry Pi Trading Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define NUM_MONITORS 2 -+#define NUM_BUS_WATCHERS_PER_MONITOR 3 -+ -+#define SYSTEM_MONITOR 0 -+#define VPU_MONITOR 1 -+ -+#define MAX_BUSES 16 -+#define DEFAULT_SAMPLE_TIME 100 -+ -+#define NUM_BUS_WATCHER_RESULTS 9 -+ -+struct bus_watcher_data { -+ union { -+ u32 results[NUM_BUS_WATCHER_RESULTS]; -+ struct { -+ u32 atrans; -+ u32 atwait; -+ u32 amax; -+ u32 wtrans; -+ u32 wtwait; -+ u32 wmax; -+ u32 rtrans; -+ u32 rtwait; -+ u32 rmax; -+ }; -+ }; -+}; -+ -+ -+struct rpi_axiperf { -+ struct platform_device *dev; -+ struct dentry *root_folder; -+ -+ struct task_struct *monitor_thread; -+ struct mutex lock; -+ -+ struct rpi_firmware *firmware; -+ -+ /* Sample time spent on for each bus */ -+ int sample_time; -+ -+ /* Now storage for the per monitor settings and the resulting -+ * performance figures -+ */ -+ struct { -+ /* Bit field of buses we want to monitor */ -+ int bus_enabled; -+ /* Bit field of buses to filter by */ -+ int bus_filter; -+ /* The current buses being monitored on this monitor */ -+ int current_bus[NUM_BUS_WATCHERS_PER_MONITOR]; -+ /* The last bus monitored on this monitor */ -+ int last_monitored; -+ -+ /* Set true if this mailbox must use the mailbox interface -+ * rather than access registers directly. -+ */ -+ int use_mailbox_interface; -+ -+ /* Current result values */ -+ struct bus_watcher_data results[MAX_BUSES]; -+ -+ struct dentry *debugfs_entry; -+ void __iomem *base_address; -+ -+ } monitor[NUM_MONITORS]; -+ -+}; -+ -+static struct rpi_axiperf *state; -+ -+/* Two monitors, System and VPU, each with the following register sets. -+ * Each monitor can only monitor one bus at a time, so we time share them, -+ * giving each bus 100ms (default, settable via debugfs) of time on its -+ * associated monitor -+ * Record results from the three Bus watchers per monitor and push to the sysfs -+ */ -+ -+/* general registers */ -+const int GEN_CTRL; -+ -+const int GEN_CTL_ENABLE_BIT = BIT(0); -+const int GEN_CTL_RESET_BIT = BIT(1); -+ -+/* Bus watcher registers */ -+const int BW_PITCH = 0x40; -+ -+const int BW0_CTRL = 0x40; -+const int BW1_CTRL = 0x80; -+const int BW2_CTRL = 0xc0; -+ -+const int BW_ATRANS_OFFSET = 0x04; -+const int BW_ATWAIT_OFFSET = 0x08; -+const int BW_AMAX_OFFSET = 0x0c; -+const int BW_WTRANS_OFFSET = 0x10; -+const int BW_WTWAIT_OFFSET = 0x14; -+const int BW_WMAX_OFFSET = 0x18; -+const int BW_RTRANS_OFFSET = 0x1c; -+const int BW_RTWAIT_OFFSET = 0x20; -+const int BW_RMAX_OFFSET = 0x24; -+ -+const int BW_CTRL_RESET_BIT = BIT(31); -+const int BW_CTRL_ENABLE_BIT = BIT(30); -+const int BW_CTRL_ENABLE_ID_FILTER_BIT = BIT(29); -+const int BW_CTRL_LIMIT_HALT_BIT = BIT(28); -+ -+const int BW_CTRL_SOURCE_SHIFT = 8; -+const int BW_CTRL_SOURCE_MASK = GENMASK(12, 8); // 5 bits -+const int BW_CTRL_BUS_WATCH_SHIFT; -+const int BW_CTRL_BUS_WATCH_MASK = GENMASK(5, 0); // 6 bits -+const int BW_CTRL_BUS_FILTER_SHIFT = 8; -+ -+const static char *bus_filter_strings[] = { -+ "", -+ "CORE0_V", -+ "ICACHE0", -+ "DCACHE0", -+ "CORE1_V", -+ "ICACHE1", -+ "DCACHE1", -+ "L2_MAIN", -+ "HOST_PORT", -+ "HOST_PORT2", -+ "HVS", -+ "ISP", -+ "VIDEO_DCT", -+ "VIDEO_SD2AXI", -+ "CAM0", -+ "CAM1", -+ "DMA0", -+ "DMA1", -+ "DMA2_VPU", -+ "JPEG", -+ "VIDEO_CME", -+ "TRANSPOSER", -+ "VIDEO_FME", -+ "CCP2TX", -+ "USB", -+ "V3D0", -+ "V3D1", -+ "V3D2", -+ "AVE", -+ "DEBUG", -+ "CPU", -+ "M30" -+}; -+ -+const int num_bus_filters = ARRAY_SIZE(bus_filter_strings); -+ -+const static char *system_bus_string[] = { -+ "DMA_L2", -+ "TRANS", -+ "JPEG", -+ "SYSTEM_UC", -+ "DMA_UC", -+ "SYSTEM_L2", -+ "CCP2TX", -+ "MPHI_RX", -+ "MPHI_TX", -+ "HVS", -+ "H264", -+ "ISP", -+ "V3D", -+ "PERIPHERAL", -+ "CPU_UC", -+ "CPU_L2" -+}; -+ -+const int num_system_buses = ARRAY_SIZE(system_bus_string); -+ -+const static char *vpu_bus_string[] = { -+ "VPU1_D_L2", -+ "VPU0_D_L2", -+ "VPU1_I_L2", -+ "VPU0_I_L2", -+ "SYSTEM_L2", -+ "L2_FLUSH", -+ "DMA_L2", -+ "VPU1_D_UC", -+ "VPU0_D_UC", -+ "VPU1_I_UC", -+ "VPU0_I_UC", -+ "SYSTEM_UC", -+ "L2_OUT", -+ "DMA_UC", -+ "SDRAM", -+ "L2_IN" -+}; -+ -+const int num_vpu_buses = ARRAY_SIZE(vpu_bus_string); -+ -+const static char *monitor_name[] = { -+ "System", -+ "VPU" -+}; -+ -+static inline void write_reg(int monitor, int reg, u32 value) -+{ -+ writel(value, state->monitor[monitor].base_address + reg); -+} -+ -+static inline u32 read_reg(int monitor, u32 reg) -+{ -+ return readl(state->monitor[monitor].base_address + reg); -+} -+ -+static void read_bus_watcher(int monitor, int watcher, u32 *results) -+{ -+ if (state->monitor[monitor].use_mailbox_interface) { -+ /* We have 9 results, plus the overheads of start address and -+ * length So 11 u32 to define -+ */ -+ u32 tmp[11]; -+ int err; -+ -+ tmp[0] = (u32)(state->monitor[monitor].base_address + watcher -+ + BW_ATRANS_OFFSET); -+ tmp[1] = NUM_BUS_WATCHER_RESULTS; -+ -+ err = rpi_firmware_property(state->firmware, -+ RPI_FIRMWARE_GET_PERIPH_REG, -+ tmp, sizeof(tmp)); -+ -+ if (err < 0 || tmp[1] != NUM_BUS_WATCHER_RESULTS) -+ dev_err_once(&state->dev->dev, -+ "Failed to read bus watcher"); -+ else -+ memcpy(results, &tmp[2], -+ NUM_BUS_WATCHER_RESULTS * sizeof(u32)); -+ } else { -+ int i; -+ void __iomem *addr = state->monitor[monitor].base_address -+ + watcher + BW_ATRANS_OFFSET; -+ for (i = 0; i < NUM_BUS_WATCHER_RESULTS; i++, addr += 4) -+ *results++ = readl(addr); -+ } -+} -+ -+static void set_monitor_control(int monitor, u32 set) -+{ -+ if (state->monitor[monitor].use_mailbox_interface) { -+ u32 tmp[3] = {(u32)(state->monitor[monitor].base_address + -+ GEN_CTRL), 1, set}; -+ int err = rpi_firmware_property(state->firmware, -+ RPI_FIRMWARE_SET_PERIPH_REG, -+ tmp, sizeof(tmp)); -+ -+ if (err < 0 || tmp[1] != 1) -+ dev_err_once(&state->dev->dev, -+ "Failed to set monitor control"); -+ } else -+ write_reg(monitor, GEN_CTRL, set); -+} -+ -+static void set_bus_watcher_control(int monitor, int watcher, u32 set) -+{ -+ if (state->monitor[monitor].use_mailbox_interface) { -+ u32 tmp[3] = {(u32)(state->monitor[monitor].base_address + -+ watcher), 1, set}; -+ int err = rpi_firmware_property(state->firmware, -+ RPI_FIRMWARE_SET_PERIPH_REG, -+ tmp, sizeof(tmp)); -+ if (err < 0 || tmp[1] != 1) -+ dev_err_once(&state->dev->dev, -+ "Failed to set bus watcher control"); -+ } else -+ write_reg(monitor, watcher, set); -+} -+ -+static void monitor(struct rpi_axiperf *state) -+{ -+ int monitor, num_buses[NUM_MONITORS]; -+ -+ mutex_lock(&state->lock); -+ -+ for (monitor = 0; monitor < NUM_MONITORS; monitor++) { -+ typeof(state->monitor[0]) *mon = &(state->monitor[monitor]); -+ -+ /* Anything enabled? */ -+ if (mon->bus_enabled == 0) { -+ /* No, disable all monitoring for this monitor */ -+ set_monitor_control(monitor, GEN_CTL_RESET_BIT); -+ } else { -+ int i; -+ -+ /* Find out how many busses we want to monitor, and -+ * spread our 3 actual monitors over them -+ */ -+ num_buses[monitor] = hweight32(mon->bus_enabled); -+ num_buses[monitor] = min(num_buses[monitor], -+ NUM_BUS_WATCHERS_PER_MONITOR); -+ -+ for (i = 0; i < num_buses[monitor]; i++) { -+ int bus_control; -+ -+ do { -+ mon->last_monitored++; -+ mon->last_monitored &= 0xf; -+ } while ((mon->bus_enabled & -+ (1 << mon->last_monitored)) == 0); -+ -+ mon->current_bus[i] = mon->last_monitored; -+ -+ /* Reset the counters */ -+ set_bus_watcher_control(monitor, -+ BW0_CTRL + -+ i*BW_PITCH, -+ BW_CTRL_RESET_BIT); -+ -+ bus_control = BW_CTRL_ENABLE_BIT | -+ mon->current_bus[i]; -+ -+ if (mon->bus_filter) { -+ bus_control |= -+ BW_CTRL_ENABLE_ID_FILTER_BIT; -+ bus_control |= -+ ((mon->bus_filter & 0x1f) -+ << BW_CTRL_BUS_FILTER_SHIFT); -+ } -+ -+ // Start capture -+ set_bus_watcher_control(monitor, -+ BW0_CTRL + i*BW_PITCH, -+ bus_control); -+ } -+ } -+ -+ /* start monitoring */ -+ set_monitor_control(monitor, GEN_CTL_ENABLE_BIT); -+ } -+ -+ mutex_unlock(&state->lock); -+ -+ msleep(state->sample_time); -+ -+ /* Now read the results */ -+ -+ mutex_lock(&state->lock); -+ for (monitor = 0; monitor < NUM_MONITORS; monitor++) { -+ typeof(state->monitor[0]) *mon = &(state->monitor[monitor]); -+ -+ /* Anything enabled? */ -+ if (mon->bus_enabled == 0) { -+ /* No, disable all monitoring for this monitor */ -+ set_monitor_control(monitor, 0); -+ } else { -+ int i; -+ -+ for (i = 0; i < num_buses[monitor]; i++) { -+ int bus = mon->current_bus[i]; -+ -+ read_bus_watcher(monitor, -+ BW0_CTRL + i*BW_PITCH, -+ (u32 *)&mon->results[bus].results); -+ } -+ } -+ } -+ mutex_unlock(&state->lock); -+} -+ -+static int monitor_thread(void *data) -+{ -+ struct rpi_axiperf *state = data; -+ -+ while (1) { -+ monitor(state); -+ -+ if (kthread_should_stop()) -+ return 0; -+ } -+ return 0; -+} -+ -+static ssize_t myreader(struct file *fp, char __user *user_buffer, -+ size_t count, loff_t *position) -+{ -+#define INIT_BUFF_SIZE 2048 -+ -+ int i; -+ int idx = (int)(fp->private_data); -+ int num_buses, cnt; -+ char *string_buffer; -+ int buff_size = INIT_BUFF_SIZE; -+ char *p; -+ typeof(state->monitor[0]) *mon = &(state->monitor[idx]); -+ -+ if (idx < 0 || idx > NUM_MONITORS) -+ idx = 0; -+ -+ num_buses = idx == SYSTEM_MONITOR ? num_system_buses : num_vpu_buses; -+ -+ string_buffer = kmalloc(buff_size, GFP_KERNEL); -+ -+ if (!string_buffer) { -+ dev_err(&state->dev->dev, -+ "Failed temporary string allocation\n"); -+ return 0; -+ } -+ -+ p = string_buffer; -+ -+ mutex_lock(&state->lock); -+ -+ if (mon->bus_filter) { -+ int filt = min(mon->bus_filter & 0x1f, num_bus_filters); -+ -+ cnt = snprintf(p, buff_size, -+ "\nMonitoring transactions from %s only\n", -+ bus_filter_strings[filt]); -+ p += cnt; -+ buff_size -= cnt; -+ } -+ -+ cnt = snprintf(p, buff_size, " Bus | Atrans Atwait AMax Wtrans Wtwait WMax Rtrans Rtwait RMax\n" -+ "======================================================================================================\n"); -+ -+ if (cnt >= buff_size) -+ goto done; -+ -+ p += cnt; -+ buff_size -= cnt; -+ -+ for (i = 0; i < num_buses; i++) { -+ if (mon->bus_enabled & (1 << i)) { -+#define DIVIDER (1024) -+ typeof(mon->results[0]) *res = &(mon->results[i]); -+ -+ cnt = snprintf(p, buff_size, -+ "%10s | %8uK %8uK %8uK %8uK %8uK %8uK %8uK %8uK %8uK\n", -+ idx == SYSTEM_MONITOR ? -+ system_bus_string[i] : -+ vpu_bus_string[i], -+ res->atrans/DIVIDER, -+ res->atwait/DIVIDER, -+ res->amax/DIVIDER, -+ res->wtrans/DIVIDER, -+ res->wtwait/DIVIDER, -+ res->wmax/DIVIDER, -+ res->rtrans/DIVIDER, -+ res->rtwait/DIVIDER, -+ res->rmax/DIVIDER -+ ); -+ if (cnt >= buff_size) -+ goto done; -+ -+ p += cnt; -+ buff_size -= cnt; -+ } -+ } -+ -+ mutex_unlock(&state->lock); -+ -+done: -+ -+ /* did the last string entry exceeed our buffer size? ie out of string -+ * buffer space. Null terminate, use what we have. -+ */ -+ if (cnt >= buff_size) { -+ buff_size = 0; -+ string_buffer[INIT_BUFF_SIZE] = 0; -+ } -+ -+ cnt = simple_read_from_buffer(user_buffer, count, position, -+ string_buffer, -+ INIT_BUFF_SIZE - buff_size); -+ -+ kfree(string_buffer); -+ -+ return cnt; -+} -+ -+static ssize_t mywriter(struct file *fp, const char __user *user_buffer, -+ size_t count, loff_t *position) -+{ -+ int idx = (int)(fp->private_data); -+ -+ if (idx < 0 || idx > NUM_MONITORS) -+ idx = 0; -+ -+ /* At the moment, this does nothing, but in the future it could be -+ * used to reset counters etc -+ */ -+ return count; -+} -+ -+static const struct file_operations fops_debug = { -+ .read = myreader, -+ .write = mywriter, -+ .open = simple_open -+}; -+ -+static int rpi_axiperf_probe(struct platform_device *pdev) -+{ -+ int ret = 0, i; -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct device_node *fw_node; -+ -+ state = kzalloc(sizeof(struct rpi_axiperf), GFP_KERNEL); -+ if (!state) -+ return -ENOMEM; -+ -+ /* Get the firmware handle for future rpi-firmware-xxx calls */ -+ fw_node = of_parse_phandle(np, "firmware", 0); -+ if (!fw_node) { -+ dev_err(dev, "Missing firmware node\n"); -+ return -ENOENT; -+ } -+ -+ state->firmware = rpi_firmware_get(fw_node); -+ if (!state->firmware) -+ return -EPROBE_DEFER; -+ -+ /* Special case for the VPU monitor, we must use the mailbox interface -+ * as it is not accessible from the ARM address space. -+ */ -+ state->monitor[VPU_MONITOR].use_mailbox_interface = 1; -+ state->monitor[SYSTEM_MONITOR].use_mailbox_interface = 0; -+ -+ for (i = 0; i < NUM_MONITORS; i++) { -+ if (state->monitor[i].use_mailbox_interface) { -+ of_property_read_u32_index(np, "reg", i*2, -+ (u32 *)(&state->monitor[i].base_address)); -+ } else { -+ struct resource *resource = -+ platform_get_resource(pdev, IORESOURCE_MEM, i); -+ -+ state->monitor[i].base_address = -+ devm_ioremap_resource(&pdev->dev, resource); -+ } -+ -+ if (IS_ERR(state->monitor[i].base_address)) -+ return PTR_ERR(state->monitor[i].base_address); -+ -+ /* Enable all buses by default */ -+ state->monitor[i].bus_enabled = 0xffff; -+ } -+ -+ state->dev = pdev; -+ platform_set_drvdata(pdev, state); -+ -+ state->sample_time = DEFAULT_SAMPLE_TIME; -+ -+ /* Set up all the debugfs stuff */ -+ state->root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL); -+ -+ for (i = 0; i < NUM_MONITORS; i++) { -+ state->monitor[i].debugfs_entry = -+ debugfs_create_dir(monitor_name[i], state->root_folder); -+ if (IS_ERR(state->monitor[i].debugfs_entry)) -+ state->monitor[i].debugfs_entry = NULL; -+ -+ debugfs_create_file("data", 0444, -+ state->monitor[i].debugfs_entry, -+ (void *)i, &fops_debug); -+ debugfs_create_u32("enable", 0644, -+ state->monitor[i].debugfs_entry, -+ &state->monitor[i].bus_enabled); -+ debugfs_create_u32("filter", 0644, -+ state->monitor[i].debugfs_entry, -+ &state->monitor[i].bus_filter); -+ debugfs_create_u32("sample_time", 0644, -+ state->monitor[i].debugfs_entry, -+ &state->sample_time); -+ } -+ -+ mutex_init(&state->lock); -+ -+ state->monitor_thread = kthread_run(monitor_thread, state, -+ "rpi-axiperfmon"); -+ -+ return ret; -+ -+} -+ -+static int rpi_axiperf_remove(struct platform_device *dev) -+{ -+ int ret = 0; -+ -+ kthread_stop(state->monitor_thread); -+ -+ debugfs_remove_recursive(state->root_folder); -+ state->root_folder = NULL; -+ -+ return ret; -+} -+ -+static const struct of_device_id rpi_axiperf_match[] = { -+ { -+ .compatible = "brcm,bcm2835-axiperf", -+ }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, rpi_axiperf_match); -+ -+static struct platform_driver rpi_axiperf_driver = { -+ .probe = rpi_axiperf_probe, -+ .remove = rpi_axiperf_remove, -+ .driver = { -+ .name = "rpi-bcm2835-axiperf", -+ .of_match_table = of_match_ptr(rpi_axiperf_match), -+ }, -+}; -+ -+module_platform_driver(rpi_axiperf_driver); -+ -+/* Module information */ -+MODULE_AUTHOR("James Hughes "); -+MODULE_DESCRIPTION("RPI AXI Performance monitor driver"); -+MODULE_LICENSE("GPL"); -+ diff --git a/target/linux/brcm2708/patches-4.19/950-0104-ARM-Activate-FIQs-to-avoid-__irq_startup-warnings.patch b/target/linux/brcm2708/patches-4.19/950-0104-ARM-Activate-FIQs-to-avoid-__irq_startup-warnings.patch new file mode 100644 index 0000000000..545be8004e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0104-ARM-Activate-FIQs-to-avoid-__irq_startup-warnings.patch @@ -0,0 +1,36 @@ +From ffa437377a6121234cd85d3bd2a8d8c43f0bedd5 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 11 Dec 2017 09:18:32 +0000 +Subject: [PATCH] ARM: Activate FIQs to avoid __irq_startup warnings + +There is a new test in __irq_startup that the IRQ is activated, which +hasn't been the case for FIQs since they bypass some of the usual setup. + +Augment enable_fiq to include a call to irq_activate to avoid the +warning. + +Signed-off-by: Phil Elwell +--- + arch/arm/kernel/fiq.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/arch/arm/kernel/fiq.c ++++ b/arch/arm/kernel/fiq.c +@@ -56,6 +56,8 @@ + static unsigned long dfl_fiq_insn; + static struct pt_regs dfl_fiq_regs; + ++extern int irq_activate(struct irq_desc *desc); ++ + /* Default reacquire function + * - we always relinquish FIQ control + * - we always reacquire FIQ control +@@ -140,6 +142,8 @@ static int fiq_start; + + void enable_fiq(int fiq) + { ++ struct irq_desc *desc = irq_to_desc(fiq + fiq_start); ++ irq_activate(desc); + enable_irq(fiq + fiq_start); + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0104-mcp2515-Use-DT-supplied-interrupt-flags.patch b/target/linux/brcm2708/patches-4.19/950-0104-mcp2515-Use-DT-supplied-interrupt-flags.patch deleted file mode 100644 index 5a7dc4f93d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0104-mcp2515-Use-DT-supplied-interrupt-flags.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 612a3f0adcf98854dcbe8228551b941b76c6af2c Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 14 Nov 2017 11:03:22 +0000 -Subject: [PATCH 104/806] mcp2515: Use DT-supplied interrupt flags - -The MCP2515 datasheet clearly describes a level-triggered interrupt -pin. Therefore the receiving interrupt controller must also be -configured for level-triggered operation otherwise there is a danger -of a missed interrupt condition blocking all subsequent interrupts. -The ONESHOT flag ensures that the interrupt is masked until the -threaded interrupt handler exits. - -Rather than change the flags globally (they must have worked for at -least one user), allow the flags to be overridden from Device Tree -in the event that the device has a DT node. - -See: https://github.com/raspberrypi/linux/issues/2175 - https://github.com/raspberrypi/linux/issues/2263 - -Signed-off-by: Phil Elwell ---- - drivers/net/can/spi/mcp251x.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/net/can/spi/mcp251x.c -+++ b/drivers/net/can/spi/mcp251x.c -@@ -948,6 +948,9 @@ static int mcp251x_open(struct net_devic - priv->tx_skb = NULL; - priv->tx_len = 0; - -+ if (spi->dev.of_node) -+ flags = 0; -+ - ret = request_threaded_irq(spi->irq, NULL, mcp251x_can_ist, - flags | IRQF_ONESHOT, DEVICE_NAME, priv); - if (ret) { diff --git a/target/linux/brcm2708/patches-4.19/950-0105-Tidy-up-of-the-ft5406-driver-to-use-DT-2189.patch b/target/linux/brcm2708/patches-4.19/950-0105-Tidy-up-of-the-ft5406-driver-to-use-DT-2189.patch deleted file mode 100644 index fce6b864ec..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0105-Tidy-up-of-the-ft5406-driver-to-use-DT-2189.patch +++ /dev/null @@ -1,382 +0,0 @@ -From 67acc12c996ef55038206de9e4220e69bf8dd517 Mon Sep 17 00:00:00 2001 -From: James Hughes -Date: Thu, 16 Nov 2017 15:56:17 +0000 -Subject: [PATCH 105/806] Tidy up of the ft5406 driver to use DT (#2189) - -Driver was using a fixed resolution, this commit -adds touchscreen size, and coordinate flip and swap -features via device tree overlays. - -Adds overrides so the VC4 can adjust the DT parameters -appropriately; there is a newer version of the VC4 side -driver that can now set up the appropriate DT values -if required. - -Signed-off-by: James Hughes ---- - drivers/input/touchscreen/rpi-ft5406.c | 218 ++++++++++++++++--------- - 1 file changed, 145 insertions(+), 73 deletions(-) - ---- a/drivers/input/touchscreen/rpi-ft5406.c -+++ b/drivers/input/touchscreen/rpi-ft5406.c -@@ -1,7 +1,7 @@ - /* - * Driver for memory based ft5406 touchscreen - * -- * Copyright (C) 2015 Raspberry Pi -+ * Copyright (C) 2015, 2017 Raspberry Pi - * - * - * This program is free software; you can redistribute it and/or modify -@@ -9,7 +9,6 @@ - * published by the Free Software Foundation. - */ - -- - #include - #include - #include -@@ -21,11 +20,15 @@ - #include - #include - #include --#include -+#include - #include - #include - - #define MAXIMUM_SUPPORTED_POINTS 10 -+#define FTS_TOUCH_DOWN 0 -+#define FTS_TOUCH_UP 1 -+#define FTS_TOUCH_CONTACT 2 -+ - struct ft5406_regs { - uint8_t device_mode; - uint8_t gesture_id; -@@ -35,85 +38,125 @@ struct ft5406_regs { - uint8_t xl; - uint8_t yh; - uint8_t yl; -- uint8_t res1; -- uint8_t res2; -+ uint8_t pressure; /* Not supported */ -+ uint8_t area; /* Not supported */ - } point[MAXIMUM_SUPPORTED_POINTS]; - }; - --#define SCREEN_WIDTH 800 --#define SCREEN_HEIGHT 480 -+/* These are defaults if the DT entries are missing */ -+#define DEFAULT_SCREEN_WIDTH 800 -+#define DEFAULT_SCREEN_HEIGHT 480 - - struct ft5406 { -- struct platform_device * pdev; -- struct input_dev * input_dev; -- void __iomem * ts_base; -- dma_addr_t bus_addr; -- struct task_struct * thread; -+ struct platform_device *pdev; -+ struct input_dev *input_dev; -+ void __iomem *ts_base; -+ dma_addr_t bus_addr; -+ struct task_struct *thread; -+ -+ uint16_t max_x; -+ uint16_t max_y; -+ uint8_t hflip; -+ uint8_t vflip; -+ uint8_t xyswap; - }; - - /* Thread to poll for touchscreen events -- * -+ * - * This thread polls the memory based register copy of the ft5406 registers - * using the number of points register to know whether the copy has been -- * updated (we write 99 to the memory copy, the GPU will write between -+ * updated (we write 99 to the memory copy, the GPU will write between - * 0 - 10 points) - */ -+#define ID_TO_BIT(a) (1 << a) -+ - static int ft5406_thread(void *arg) - { - struct ft5406 *ts = (struct ft5406 *) arg; - struct ft5406_regs regs; - int known_ids = 0; -- -- while(!kthread_should_stop()) -- { -- // 60fps polling -+ -+ while (!kthread_should_stop()) { -+ /* 60fps polling */ - msleep_interruptible(17); - memcpy_fromio(®s, ts->ts_base, sizeof(struct ft5406_regs)); -- iowrite8(99, ts->ts_base + offsetof(struct ft5406_regs, num_points)); -- // Do not output if theres no new information (num_points is 99) -- // or we have no touch points and don't need to release any -- if(!(regs.num_points == 99 || (regs.num_points == 0 && known_ids == 0))) -- { -+ iowrite8(99, -+ ts->ts_base + -+ offsetof(struct ft5406_regs, num_points)); -+ -+ /* -+ * Do not output if theres no new information (num_points is 99) -+ * or we have no touch points and don't need to release any -+ */ -+ if (!(regs.num_points == 99 || -+ (regs.num_points == 0 && known_ids == 0))) { - int i; - int modified_ids = 0, released_ids; -- for(i = 0; i < regs.num_points; i++) -- { -- int x = (((int) regs.point[i].xh & 0xf) << 8) + regs.point[i].xl; -- int y = (((int) regs.point[i].yh & 0xf) << 8) + regs.point[i].yl; -- int touchid = (regs.point[i].yh >> 4) & 0xf; -- -- modified_ids |= 1 << touchid; - -- if(!((1 << touchid) & known_ids)) -- dev_dbg(&ts->pdev->dev, "x = %d, y = %d, touchid = %d\n", x, y, touchid); -- -- input_mt_slot(ts->input_dev, touchid); -- input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 1); -+ for (i = 0; i < regs.num_points; i++) { -+ int x = (((int) regs.point[i].xh & 0xf) << 8) + -+ regs.point[i].xl; -+ int y = (((int) regs.point[i].yh & 0xf) << 8) + -+ regs.point[i].yl; -+ int touchid = (regs.point[i].yh >> 4) & 0xf; -+ int event_type = (regs.point[i].xh >> 6) & 0x03; - -- input_report_abs(ts->input_dev, ABS_MT_POSITION_X, x); -- input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, y); -+ modified_ids |= ID_TO_BIT(touchid); - -+ if (event_type == FTS_TOUCH_DOWN || -+ event_type == FTS_TOUCH_CONTACT) { -+ if (ts->hflip) -+ x = ts->max_x - 1 - x; -+ -+ if (ts->vflip) -+ y = ts->max_y - 1 - y; -+ -+ if (ts->xyswap) -+ swap(x, y); -+ -+ if (!((ID_TO_BIT(touchid)) & known_ids)) -+ dev_dbg(&ts->pdev->dev, -+ "x = %d, y = %d, press = %d, touchid = %d\n", -+ x, y, -+ regs.point[i].pressure, -+ touchid); -+ -+ input_mt_slot(ts->input_dev, touchid); -+ input_mt_report_slot_state( -+ ts->input_dev, -+ MT_TOOL_FINGER, -+ 1); -+ -+ input_report_abs(ts->input_dev, -+ ABS_MT_POSITION_X, x); -+ input_report_abs(ts->input_dev, -+ ABS_MT_POSITION_Y, y); -+ } - } - - released_ids = known_ids & ~modified_ids; -- for(i = 0; released_ids && i < MAXIMUM_SUPPORTED_POINTS; i++) -- { -- if(released_ids & (1<pdev->dev, "Released %d, known = %x modified = %x\n", i, known_ids, modified_ids); -+ for (i = 0; -+ released_ids && i < MAXIMUM_SUPPORTED_POINTS; -+ i++) { -+ if (released_ids & (1<pdev->dev, -+ "Released %d, known = %x, modified = %x\n", -+ i, known_ids, modified_ids); - input_mt_slot(ts->input_dev, i); -- input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 0); -- modified_ids &= ~(1 << i); -+ input_mt_report_slot_state( -+ ts->input_dev, -+ MT_TOOL_FINGER, -+ 0); -+ modified_ids &= ~(ID_TO_BIT(i)); - } - } - known_ids = modified_ids; -- -+ - input_mt_report_pointer_emulation(ts->input_dev, true); - input_sync(ts->input_dev); - } -- - } -- -+ - return 0; - } - -@@ -122,13 +165,14 @@ static int ft5406_probe(struct platform_ - int err = 0; - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; -- struct ft5406 * ts; -+ struct ft5406 *ts; - struct device_node *fw_node; - struct rpi_firmware *fw; - u32 touchbuf; -- -+ u32 val; -+ - dev_info(dev, "Probing device\n"); -- -+ - fw_node = of_parse_phandle(np, "firmware", 0); - if (!fw_node) { - dev_err(dev, "Missing firmware node\n"); -@@ -151,7 +195,8 @@ static int ft5406_probe(struct platform_ - return -ENOMEM; - } - -- ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr, GFP_KERNEL); -+ ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr, -+ GFP_KERNEL); - if (!ts->ts_base) { - pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n", - __func__, PAGE_SIZE); -@@ -164,17 +209,22 @@ static int ft5406_probe(struct platform_ - &touchbuf, sizeof(touchbuf)); - - if (err || touchbuf != 0) { -- dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n", err); -+ dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n", -+ err); - dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); - ts->ts_base = 0; - ts->bus_addr = 0; - } - - if (!ts->ts_base) { -- dev_warn(dev, "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", err, touchbuf, ts->ts_base, ts->bus_addr); -- -- err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF, -- &touchbuf, sizeof(touchbuf)); -+ dev_warn(dev, -+ "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", -+ err, touchbuf, ts->ts_base, ts->bus_addr); -+ -+ err = rpi_firmware_property( -+ fw, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF, -+ &touchbuf, sizeof(touchbuf)); - if (err) { - dev_err(dev, "Failed to get touch buffer\n"); - goto out; -@@ -188,11 +238,10 @@ static int ft5406_probe(struct platform_ - - dev_dbg(dev, "Got TS buffer 0x%x\n", touchbuf); - -- // mmap the physical memory -+ /* mmap the physical memory */ - touchbuf &= ~0xc0000000; - ts->ts_base = ioremap(touchbuf, sizeof(struct ft5406_regs)); -- if (ts->ts_base == NULL) -- { -+ if (ts->ts_base == NULL) { - dev_err(dev, "Failed to map physical address\n"); - err = -ENOMEM; - goto out; -@@ -200,22 +249,46 @@ static int ft5406_probe(struct platform_ - } - platform_set_drvdata(pdev, ts); - ts->pdev = pdev; -- -+ - ts->input_dev->name = "FT5406 memory based driver"; -- -+ -+ if (of_property_read_u32(np, "touchscreen-size-x", &val) >= 0) -+ ts->max_x = val; -+ else -+ ts->max_x = DEFAULT_SCREEN_WIDTH; -+ -+ if (of_property_read_u32(np, "touchscreen-size-y", &val) >= 0) -+ ts->max_y = val; -+ else -+ ts->max_y = DEFAULT_SCREEN_HEIGHT; -+ -+ if (of_property_read_u32(np, "touchscreen-inverted-x", &val) >= 0) -+ ts->hflip = val; -+ -+ if (of_property_read_u32(np, "touchscreen-inverted-y", &val) >= 0) -+ ts->vflip = val; -+ -+ if (of_property_read_u32(np, "touchscreen-swapped-x-y", &val) >= 0) -+ ts->xyswap = val; -+ -+ dev_dbg(dev, -+ "Touchscreen parameters (%d,%d), hflip=%d, vflip=%d, xyswap=%d", -+ ts->max_x, ts->max_y, ts->hflip, ts->vflip, ts->xyswap); -+ - __set_bit(EV_KEY, ts->input_dev->evbit); - __set_bit(EV_SYN, ts->input_dev->evbit); - __set_bit(EV_ABS, ts->input_dev->evbit); - - input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0, -- SCREEN_WIDTH, 0, 0); -+ ts->xyswap ? ts->max_y : ts->max_x, 0, 0); - input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0, -- SCREEN_HEIGHT, 0, 0); -+ ts->xyswap ? ts->max_x : ts->max_y, 0, 0); - -- input_mt_init_slots(ts->input_dev, MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT); -+ input_mt_init_slots(ts->input_dev, -+ MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT); - - input_set_drvdata(ts->input_dev, ts); -- -+ - err = input_register_device(ts->input_dev); - if (err) { - dev_err(dev, "could not register input device, %d\n", -@@ -223,10 +296,9 @@ static int ft5406_probe(struct platform_ - goto out; - } - -- // create thread to poll the touch events -+ /* create thread that polls the touch events */ - ts->thread = kthread_run(ft5406_thread, ts, "ft5406"); -- if(ts->thread == NULL) -- { -+ if (ts->thread == NULL) { - dev_err(dev, "Failed to create kernel thread"); - err = -ENOMEM; - goto out; -@@ -254,9 +326,9 @@ static int ft5406_remove(struct platform - { - struct device *dev = &pdev->dev; - struct ft5406 *ts = (struct ft5406 *) platform_get_drvdata(pdev); -- -+ - dev_info(dev, "Removing rpi-ft5406\n"); -- -+ - kthread_stop(ts->thread); - - if (ts->bus_addr) -@@ -265,7 +337,7 @@ static int ft5406_remove(struct platform - iounmap(ts->ts_base); - if (ts->input_dev) - input_unregister_device(ts->input_dev); -- -+ - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0105-serial-8250-bcm2835aux-suppress-EPROBE_DEFER.patch b/target/linux/brcm2708/patches-4.19/950-0105-serial-8250-bcm2835aux-suppress-EPROBE_DEFER.patch new file mode 100644 index 0000000000..3e60981b89 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0105-serial-8250-bcm2835aux-suppress-EPROBE_DEFER.patch @@ -0,0 +1,22 @@ +From f12549c9f3aed64fae5fe2ebbc2e8568a78829a2 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 22 Jan 2018 17:26:38 +0000 +Subject: [PATCH] serial: 8250: bcm2835aux - suppress EPROBE_DEFER + +Signed-off-by: Phil Elwell +--- + drivers/tty/serial/8250/8250_bcm2835aux.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/tty/serial/8250/8250_bcm2835aux.c ++++ b/drivers/tty/serial/8250/8250_bcm2835aux.c +@@ -50,7 +50,8 @@ static int bcm2835aux_serial_probe(struc + data->clk = devm_clk_get(&pdev->dev, NULL); + ret = PTR_ERR_OR_ZERO(data->clk); + if (ret) { +- dev_err(&pdev->dev, "could not get clk: %d\n", ret); ++ if (ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, "could not get clk: %d\n", ret); + return ret; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0106-cgroup-Disable-cgroup-memory-by-default.patch b/target/linux/brcm2708/patches-4.19/950-0106-cgroup-Disable-cgroup-memory-by-default.patch deleted file mode 100644 index 9650b6040c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0106-cgroup-Disable-cgroup-memory-by-default.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 7ae6ba03434344f90403936ae79bfd7ba005b49c Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 27 Nov 2017 17:14:54 +0000 -Subject: [PATCH 106/806] cgroup: Disable cgroup "memory" by default - -Some Raspberry Pis have limited RAM and most users won't use the -cgroup memory support so it is disabled by default. Enable with: - - cgroup_enable=memory - -See: https://github.com/raspberrypi/linux/issues/1950 - -Signed-off-by: Phil Elwell ---- - kernel/cgroup/cgroup.c | 30 ++++++++++++++++++++++++++++++ - 1 file changed, 30 insertions(+) - ---- a/kernel/cgroup/cgroup.c -+++ b/kernel/cgroup/cgroup.c -@@ -5334,6 +5334,8 @@ int __init cgroup_init_early(void) - } - - static u16 cgroup_disable_mask __initdata; -+static u16 cgroup_enable_mask __initdata; -+static int __init cgroup_disable(char *str); - - /** - * cgroup_init - cgroup initialization -@@ -5374,6 +5376,12 @@ int __init cgroup_init(void) - - mutex_unlock(&cgroup_mutex); - -+ /* Apply an implicit disable... */ -+ cgroup_disable("memory"); -+ -+ /* ...knowing that an explicit enable will override it. */ -+ cgroup_disable_mask &= ~cgroup_enable_mask; -+ - for_each_subsys(ss, ssid) { - if (ss->early_init) { - struct cgroup_subsys_state *css = -@@ -5765,6 +5773,28 @@ static int __init cgroup_disable(char *s - } - __setup("cgroup_disable=", cgroup_disable); - -+static int __init cgroup_enable(char *str) -+{ -+ struct cgroup_subsys *ss; -+ char *token; -+ int i; -+ -+ while ((token = strsep(&str, ",")) != NULL) { -+ if (!*token) -+ continue; -+ -+ for_each_subsys(ss, i) { -+ if (strcmp(token, ss->name) && -+ strcmp(token, ss->legacy_name)) -+ continue; -+ -+ cgroup_enable_mask |= 1 << i; -+ } -+ } -+ return 1; -+} -+__setup("cgroup_enable=", cgroup_enable); -+ - /** - * css_tryget_online_from_dir - get corresponding css from a cgroup dentry - * @dentry: directory dentry of interest diff --git a/target/linux/brcm2708/patches-4.19/950-0106-raspberrypi-firmware-Export-the-general-transaction-.patch b/target/linux/brcm2708/patches-4.19/950-0106-raspberrypi-firmware-Export-the-general-transaction-.patch new file mode 100644 index 0000000000..8f574a3226 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0106-raspberrypi-firmware-Export-the-general-transaction-.patch @@ -0,0 +1,32 @@ +From 79d09be78f74e3c81ff25f1f78fb17a2f112e3cd Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 14 Sep 2016 09:16:19 +0100 +Subject: [PATCH] raspberrypi-firmware: Export the general transaction + function. + +The vc4-firmware-kms module is going to be doing the MBOX FB call. + +Signed-off-by: Eric Anholt +--- + drivers/firmware/raspberrypi.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -45,7 +45,7 @@ static void response_callback(struct mbo + * Sends a request to the firmware through the BCM2835 mailbox driver, + * and synchronously waits for the reply. + */ +-static int ++int + rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data) + { + u32 message = MBOX_MSG(chan, data); +@@ -66,6 +66,7 @@ rpi_firmware_transaction(struct rpi_firm + + return ret; + } ++EXPORT_SYMBOL_GPL(rpi_firmware_transaction); + + /** + * rpi_firmware_property_list - Submit firmware property list diff --git a/target/linux/brcm2708/patches-4.19/950-0107-ARM-bcm2835-Set-Serial-number-and-Revision.patch b/target/linux/brcm2708/patches-4.19/950-0107-ARM-bcm2835-Set-Serial-number-and-Revision.patch deleted file mode 100644 index 2ea61494cc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0107-ARM-bcm2835-Set-Serial-number-and-Revision.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 6eb5a426229447a1045507fb63afdb11ddc5eda4 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Wed, 3 Jun 2015 12:26:13 +0200 -Subject: [PATCH 107/806] ARM: bcm2835: Set Serial number and Revision -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The VideoCore bootloader passes in Serial number and -Revision number through Device Tree. Make these available to -userspace through /proc/cpuinfo. - -Mainline status: - -There is a commit in linux-next that standardize passing the serial -number through Device Tree (string: /serial-number): -ARM: 8355/1: arch: Show the serial number from devicetree in cpuinfo - -There was an attempt to do the same with the revision number, but it -didn't get in: -[PATCH v2 1/2] arm: devtree: Set system_rev from DT revision - -Signed-off-by: Noralf Trønnes ---- - arch/arm/mach-bcm/board_bcm2835.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/arch/arm/mach-bcm/board_bcm2835.c -+++ b/arch/arm/mach-bcm/board_bcm2835.c -@@ -15,12 +15,25 @@ - #include - #include - #include -+#include - - #include - #include - - #include "platsmp.h" - -+static void __init bcm2835_init(void) -+{ -+ struct device_node *np = of_find_node_by_path("/system"); -+ u32 val; -+ u64 val64; -+ -+ if (!of_property_read_u32(np, "linux,revision", &val)) -+ system_rev = val; -+ if (!of_property_read_u64(np, "linux,serial", &val64)) -+ system_serial_low = val64; -+} -+ - static const char * const bcm2835_compat[] = { - #ifdef CONFIG_ARCH_MULTI_V6 - "brcm,bcm2835", -@@ -33,6 +46,7 @@ static const char * const bcm2835_compat - }; - - DT_MACHINE_START(BCM2835, "BCM2835") -+ .init_machine = bcm2835_init, - .dt_compat = bcm2835_compat, - .smp = smp_ops(bcm2836_smp_ops), - MACHINE_END diff --git a/target/linux/brcm2708/patches-4.19/950-0107-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch b/target/linux/brcm2708/patches-4.19/950-0107-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch new file mode 100644 index 0000000000..b4db1d7c60 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0107-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch @@ -0,0 +1,762 @@ +From 3ddc9f2dc424c085ca646e92b40d156bb5318295 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 14 Sep 2016 08:39:33 +0100 +Subject: [PATCH] drm/vc4: Add a mode for using the closed firmware for + display. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/Makefile | 1 + + drivers/gpu/drm/vc4/vc4_crtc.c | 17 + + drivers/gpu/drm/vc4/vc4_drv.c | 1 + + drivers/gpu/drm/vc4/vc4_drv.h | 7 + + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 656 +++++++++++++++++++++++++ + 5 files changed, 682 insertions(+) + create mode 100644 drivers/gpu/drm/vc4/vc4_firmware_kms.c + +--- a/drivers/gpu/drm/vc4/Makefile ++++ b/drivers/gpu/drm/vc4/Makefile +@@ -9,6 +9,7 @@ vc4-y := \ + vc4_dpi.o \ + vc4_dsi.o \ + vc4_fence.o \ ++ vc4_firmware_kms.o \ + vc4_kms.o \ + vc4_gem.o \ + vc4_hdmi.o \ +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -133,6 +133,9 @@ bool vc4_crtc_get_scanoutpos(struct drm_ + int vblank_lines; + bool ret = false; + ++ if (vc4->firmware_kms) ++ return 0; ++ + /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ + + /* Get optional system timestamp before query. */ +@@ -761,8 +764,15 @@ static void vc4_crtc_atomic_flush(struct + + static int vc4_enable_vblank(struct drm_crtc *crtc) + { ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + ++ if (vc4->firmware_kms) { ++ /* XXX: Can we mask the SMI interrupt? */ ++ return 0; ++ } ++ + CRTC_WRITE(PV_INTEN, PV_INT_VFP_START); + + return 0; +@@ -770,8 +780,15 @@ static int vc4_enable_vblank(struct drm_ + + static void vc4_disable_vblank(struct drm_crtc *crtc) + { ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + ++ if (vc4->firmware_kms) { ++ /* XXX: Can we mask the SMI interrupt? */ ++ return; ++ } ++ + CRTC_WRITE(PV_INTEN, 0); + } + +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -347,6 +347,7 @@ static struct platform_driver *const com + &vc4_txp_driver, + &vc4_hvs_driver, + &vc4_crtc_driver, ++ &vc4_firmware_kms_driver, + &vc4_v3d_driver, + }; + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -67,6 +67,9 @@ struct vc4_perfmon { + struct vc4_dev { + struct drm_device *dev; + ++ bool firmware_kms; ++ struct rpi_firmware *firmware; ++ + struct vc4_hdmi *hdmi; + struct vc4_hvs *hvs; + struct vc4_v3d *v3d; +@@ -719,6 +722,10 @@ int vc4_dsi_debugfs_regs(struct seq_file + /* vc4_fence.c */ + extern const struct dma_fence_ops vc4_fence_ops; + ++/* vc4_firmware_kms.c */ ++extern struct platform_driver vc4_firmware_kms_driver; ++void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); ++ + /* vc4_gem.c */ + void vc4_gem_init(struct drm_device *dev); + void vc4_gem_destroy(struct drm_device *dev); +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -0,0 +1,656 @@ ++/* ++ * Copyright (C) 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/** ++ * DOC: VC4 firmware KMS module. ++ * ++ * As a hack to get us from the current closed source driver world ++ * toward a totally open stack, implement KMS on top of the Raspberry ++ * Pi's firmware display stack. ++ */ ++ ++#include "drm/drm_atomic_helper.h" ++#include "drm/drm_plane_helper.h" ++#include "drm/drm_crtc_helper.h" ++#include "linux/clk.h" ++#include "linux/debugfs.h" ++#include "drm/drm_fb_cma_helper.h" ++#include "linux/component.h" ++#include "linux/of_device.h" ++#include "vc4_drv.h" ++#include "vc4_regs.h" ++#include ++ ++/* The firmware delivers a vblank interrupt to us through the SMI ++ * hardware, which has only this one register. ++ */ ++#define SMICS 0x0 ++#define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) ++ ++struct vc4_crtc { ++ struct drm_crtc base; ++ struct drm_encoder *encoder; ++ struct drm_connector *connector; ++ void __iomem *regs; ++ ++ struct drm_pending_vblank_event *event; ++}; ++ ++static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) ++{ ++ return container_of(crtc, struct vc4_crtc, base); ++} ++ ++struct vc4_fkms_encoder { ++ struct drm_encoder base; ++}; ++ ++static inline struct vc4_fkms_encoder * ++to_vc4_fkms_encoder(struct drm_encoder *encoder) ++{ ++ return container_of(encoder, struct vc4_fkms_encoder, base); ++} ++ ++/* VC4 FKMS connector KMS struct */ ++struct vc4_fkms_connector { ++ struct drm_connector base; ++ ++ /* Since the connector is attached to just the one encoder, ++ * this is the reference to it so we can do the best_encoder() ++ * hook. ++ */ ++ struct drm_encoder *encoder; ++}; ++ ++static inline struct vc4_fkms_connector * ++to_vc4_fkms_connector(struct drm_connector *connector) ++{ ++ return container_of(connector, struct vc4_fkms_connector, base); ++} ++ ++/* Firmware's structure for making an FB mbox call. */ ++struct fbinfo_s { ++ u32 xres, yres, xres_virtual, yres_virtual; ++ u32 pitch, bpp; ++ u32 xoffset, yoffset; ++ u32 base; ++ u32 screen_size; ++ u16 cmap[256]; ++}; ++ ++struct vc4_fkms_plane { ++ struct drm_plane base; ++ struct fbinfo_s *fbinfo; ++ dma_addr_t fbinfo_bus_addr; ++ u32 pitch; ++}; ++ ++static inline struct vc4_fkms_plane *to_vc4_fkms_plane(struct drm_plane *plane) ++{ ++ return (struct vc4_fkms_plane *)plane; ++} ++ ++/* Turns the display on/off. */ ++static int vc4_plane_set_primary_blank(struct drm_plane *plane, bool blank) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ ++ u32 packet = blank; ++ return rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_BLANK, ++ &packet, sizeof(packet)); ++} ++ ++static void vc4_primary_plane_atomic_update(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ struct drm_plane_state *state = plane->state; ++ struct drm_framebuffer *fb = state->fb; ++ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); ++ volatile struct fbinfo_s *fbinfo = vc4_plane->fbinfo; ++ u32 bpp = 32; ++ int ret; ++ ++ vc4_plane_set_primary_blank(plane, false); ++ ++ fbinfo->xres = state->crtc_w; ++ fbinfo->yres = state->crtc_h; ++ fbinfo->xres_virtual = state->crtc_w; ++ fbinfo->yres_virtual = state->crtc_h; ++ fbinfo->bpp = bpp; ++ fbinfo->xoffset = state->crtc_x; ++ fbinfo->yoffset = state->crtc_y; ++ fbinfo->base = bo->paddr + fb->offsets[0]; ++ fbinfo->pitch = fb->pitches[0]; ++ /* A bug in the firmware makes it so that if the fb->base is ++ * set to nonzero, the configured pitch gets overwritten with ++ * the previous pitch. So, to get the configured pitch ++ * recomputed, we have to make it allocate itself a new buffer ++ * in VC memory, first. ++ */ ++ if (vc4_plane->pitch != fb->pitches[0]) { ++ u32 saved_base = fbinfo->base; ++ fbinfo->base = 0; ++ ++ ret = rpi_firmware_transaction(vc4->firmware, ++ RPI_FIRMWARE_CHAN_FB, ++ vc4_plane->fbinfo_bus_addr); ++ fbinfo->base = saved_base; ++ ++ vc4_plane->pitch = fbinfo->pitch; ++ WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); ++ } ++ ++ ret = rpi_firmware_transaction(vc4->firmware, ++ RPI_FIRMWARE_CHAN_FB, ++ vc4_plane->fbinfo_bus_addr); ++ WARN_ON_ONCE(fbinfo->pitch != fb->pitches[0]); ++ WARN_ON_ONCE(fbinfo->base != bo->paddr + fb->offsets[0]); ++} ++ ++static void vc4_primary_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ vc4_plane_set_primary_blank(plane, true); ++} ++ ++static void vc4_cursor_plane_atomic_update(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct drm_plane_state *state = plane->state; ++ struct drm_framebuffer *fb = state->fb; ++ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); ++ int ret; ++ u32 packet_state[] = { true, state->crtc_x, state->crtc_y, 0 }; ++ u32 packet_info[] = { state->crtc_w, state->crtc_h, ++ 0, /* unused */ ++ bo->paddr + fb->offsets[0], ++ 0, 0, /* hotx, hoty */}; ++ WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_STATE, ++ &packet_state, ++ sizeof(packet_state)); ++ if (ret || packet_state[0] != 0) ++ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_INFO, ++ &packet_info, ++ sizeof(packet_info)); ++ if (ret || packet_info[0] != 0) ++ DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); ++} ++ ++static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ u32 packet_state[] = { false, 0, 0, 0 }; ++ int ret; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_STATE, ++ &packet_state, ++ sizeof(packet_state)); ++ if (ret || packet_state[0] != 0) ++ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); ++} ++ ++static int vc4_plane_atomic_check(struct drm_plane *plane, ++ struct drm_plane_state *state) ++{ ++ return 0; ++} ++ ++static void vc4_plane_destroy(struct drm_plane *plane) ++{ ++ drm_plane_helper_disable(plane); ++ drm_plane_cleanup(plane); ++} ++ ++static const struct drm_plane_funcs vc4_plane_funcs = { ++ .update_plane = drm_atomic_helper_update_plane, ++ .disable_plane = drm_atomic_helper_disable_plane, ++ .destroy = vc4_plane_destroy, ++ .set_property = NULL, ++ .reset = drm_atomic_helper_plane_reset, ++ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, ++}; ++ ++static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { ++ .prepare_fb = NULL, ++ .cleanup_fb = NULL, ++ .atomic_check = vc4_plane_atomic_check, ++ .atomic_update = vc4_primary_plane_atomic_update, ++ .atomic_disable = vc4_primary_plane_atomic_disable, ++}; ++ ++static const struct drm_plane_helper_funcs vc4_cursor_plane_helper_funcs = { ++ .prepare_fb = NULL, ++ .cleanup_fb = NULL, ++ .atomic_check = vc4_plane_atomic_check, ++ .atomic_update = vc4_cursor_plane_atomic_update, ++ .atomic_disable = vc4_cursor_plane_atomic_disable, ++}; ++ ++static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, ++ enum drm_plane_type type) ++{ ++ struct drm_plane *plane = NULL; ++ struct vc4_fkms_plane *vc4_plane; ++ u32 xrgb8888 = DRM_FORMAT_XRGB8888; ++ u32 argb8888 = DRM_FORMAT_ARGB8888; ++ int ret = 0; ++ bool primary = (type == DRM_PLANE_TYPE_PRIMARY); ++ ++ vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), ++ GFP_KERNEL); ++ if (!vc4_plane) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ ++ plane = &vc4_plane->base; ++ ret = drm_universal_plane_init(dev, plane, 0xff, ++ &vc4_plane_funcs, ++ primary ? &xrgb8888 : &argb8888, 1, NULL, ++ type, NULL); ++ ++ if (type == DRM_PLANE_TYPE_PRIMARY) { ++ vc4_plane->fbinfo = ++ dma_alloc_coherent(dev->dev, ++ sizeof(*vc4_plane->fbinfo), ++ &vc4_plane->fbinfo_bus_addr, ++ GFP_KERNEL); ++ memset(vc4_plane->fbinfo, 0, sizeof(*vc4_plane->fbinfo)); ++ ++ drm_plane_helper_add(plane, &vc4_primary_plane_helper_funcs); ++ } else { ++ drm_plane_helper_add(plane, &vc4_cursor_plane_helper_funcs); ++ } ++ ++ return plane; ++fail: ++ if (plane) ++ vc4_plane_destroy(plane); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) ++{ ++ /* Everyting is handled in the planes. */ ++} ++ ++static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) ++{ ++} ++ ++static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) ++{ ++} ++ ++static int vc4_crtc_atomic_check(struct drm_crtc *crtc, ++ struct drm_crtc_state *state) ++{ ++ return 0; ++} ++ ++static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, ++ struct drm_crtc_state *old_state) ++{ ++} ++ ++static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) ++{ ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ if (vc4_crtc->event) { ++ drm_crtc_send_vblank_event(crtc, vc4_crtc->event); ++ vc4_crtc->event = NULL; ++ drm_crtc_vblank_put(crtc); ++ } ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) ++{ ++ struct vc4_crtc *vc4_crtc = data; ++ u32 stat = readl(vc4_crtc->regs + SMICS); ++ irqreturn_t ret = IRQ_NONE; ++ ++ if (stat & SMICS_INTERRUPTS) { ++ writel(0, vc4_crtc->regs + SMICS); ++ drm_crtc_handle_vblank(&vc4_crtc->base); ++ vc4_crtc_handle_page_flip(vc4_crtc); ++ ret = IRQ_HANDLED; ++ } ++ ++ return ret; ++} ++ ++static int vc4_page_flip(struct drm_crtc *crtc, ++ struct drm_framebuffer *fb, ++ struct drm_pending_vblank_event *event, ++ uint32_t flags, struct drm_modeset_acquire_ctx *ctx) ++{ ++ if (flags & DRM_MODE_PAGE_FLIP_ASYNC) { ++ DRM_ERROR("Async flips aren't allowed\n"); ++ return -EINVAL; ++ } ++ ++ return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx); ++} ++ ++static const struct drm_crtc_funcs vc4_crtc_funcs = { ++ .set_config = drm_atomic_helper_set_config, ++ .destroy = drm_crtc_cleanup, ++ .page_flip = vc4_page_flip, ++ .set_property = NULL, ++ .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ ++ .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ ++ .reset = drm_atomic_helper_crtc_reset, ++ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, ++}; ++ ++static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { ++ .mode_set_nofb = vc4_crtc_mode_set_nofb, ++ .atomic_disable = vc4_crtc_disable, ++ .atomic_enable = vc4_crtc_enable, ++ .atomic_check = vc4_crtc_atomic_check, ++ .atomic_flush = vc4_crtc_atomic_flush, ++}; ++ ++/* Frees the page flip event when the DRM device is closed with the ++ * event still outstanding. ++ */ ++void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ ++ if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) { ++ kfree(&vc4_crtc->event->base); ++ drm_crtc_vblank_put(crtc); ++ vc4_crtc->event = NULL; ++ } ++ ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static const struct of_device_id vc4_firmware_kms_dt_match[] = { ++ { .compatible = "raspberrypi,rpi-firmware-kms" }, ++ {} ++}; ++ ++static enum drm_connector_status ++vc4_fkms_connector_detect(struct drm_connector *connector, bool force) ++{ ++ return connector_status_connected; ++} ++ ++static int vc4_fkms_connector_get_modes(struct drm_connector *connector) ++{ ++ struct drm_device *dev = connector->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ u32 wh[2] = {0, 0}; ++ int ret; ++ struct drm_display_mode *mode; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, ++ &wh, sizeof(wh)); ++ if (ret) { ++ DRM_ERROR("Failed to get screen size: %d (0x%08x 0x%08x)\n", ++ ret, wh[0], wh[1]); ++ return 0; ++ } ++ ++ mode = drm_cvt_mode(dev, wh[0], wh[1], 60 /* vrefresh */, ++ 0, 0, false); ++ drm_mode_probed_add(connector, mode); ++ ++ return 1; ++} ++ ++static struct drm_encoder * ++vc4_fkms_connector_best_encoder(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ return fkms_connector->encoder; ++} ++ ++static void vc4_fkms_connector_destroy(struct drm_connector *connector) ++{ ++ drm_connector_unregister(connector); ++ drm_connector_cleanup(connector); ++} ++ ++static const struct drm_connector_funcs vc4_fkms_connector_funcs = { ++ .detect = vc4_fkms_connector_detect, ++ .fill_modes = drm_helper_probe_single_connector_modes, ++ .destroy = vc4_fkms_connector_destroy, ++ .reset = drm_atomic_helper_connector_reset, ++ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_fkms_connector_helper_funcs = { ++ .get_modes = vc4_fkms_connector_get_modes, ++ .best_encoder = vc4_fkms_connector_best_encoder, ++}; ++ ++static struct drm_connector *vc4_fkms_connector_init(struct drm_device *dev, ++ struct drm_encoder *encoder) ++{ ++ struct drm_connector *connector = NULL; ++ struct vc4_fkms_connector *fkms_connector; ++ int ret = 0; ++ ++ fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), ++ GFP_KERNEL); ++ if (!fkms_connector) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ connector = &fkms_connector->base; ++ ++ fkms_connector->encoder = encoder; ++ ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_HDMIA); ++ drm_connector_helper_add(connector, &vc4_fkms_connector_helper_funcs); ++ ++ connector->polled = (DRM_CONNECTOR_POLL_CONNECT | ++ DRM_CONNECTOR_POLL_DISCONNECT); ++ ++ connector->interlace_allowed = 0; ++ connector->doublescan_allowed = 0; ++ ++ drm_mode_connector_attach_encoder(connector, encoder); ++ ++ return connector; ++ ++ fail: ++ if (connector) ++ vc4_fkms_connector_destroy(connector); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_fkms_encoder_destroy(struct drm_encoder *encoder) ++{ ++ drm_encoder_cleanup(encoder); ++} ++ ++static const struct drm_encoder_funcs vc4_fkms_encoder_funcs = { ++ .destroy = vc4_fkms_encoder_destroy, ++}; ++ ++static void vc4_fkms_encoder_enable(struct drm_encoder *encoder) ++{ ++} ++ ++static void vc4_fkms_encoder_disable(struct drm_encoder *encoder) ++{ ++} ++ ++static const struct drm_encoder_helper_funcs vc4_fkms_encoder_helper_funcs = { ++ .enable = vc4_fkms_encoder_enable, ++ .disable = vc4_fkms_encoder_disable, ++}; ++ ++static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_crtc *vc4_crtc; ++ struct vc4_fkms_encoder *vc4_encoder; ++ struct drm_crtc *crtc; ++ struct drm_plane *primary_plane, *cursor_plane, *destroy_plane, *temp; ++ struct device_node *firmware_node; ++ int ret; ++ ++ vc4->firmware_kms = true; ++ ++ vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); ++ if (!vc4_crtc) ++ return -ENOMEM; ++ crtc = &vc4_crtc->base; ++ ++ firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); ++ vc4->firmware = rpi_firmware_get(firmware_node); ++ if (!vc4->firmware) { ++ DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); ++ return -EPROBE_DEFER; ++ } ++ of_node_put(firmware_node); ++ ++ /* Map the SMI interrupt reg */ ++ vc4_crtc->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(vc4_crtc->regs)) ++ return PTR_ERR(vc4_crtc->regs); ++ ++ /* For now, we create just the primary and the legacy cursor ++ * planes. We should be able to stack more planes on easily, ++ * but to do that we would need to compute the bandwidth ++ * requirement of the plane configuration, and reject ones ++ * that will take too much. ++ */ ++ primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY); ++ if (IS_ERR(primary_plane)) { ++ dev_err(dev, "failed to construct primary plane\n"); ++ ret = PTR_ERR(primary_plane); ++ goto err; ++ } ++ ++ cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR); ++ if (IS_ERR(cursor_plane)) { ++ dev_err(dev, "failed to construct cursor plane\n"); ++ ret = PTR_ERR(cursor_plane); ++ goto err; ++ } ++ ++ drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane, ++ &vc4_crtc_funcs, NULL); ++ drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); ++ primary_plane->crtc = crtc; ++ cursor_plane->crtc = crtc; ++ ++ vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); ++ if (!vc4_encoder) ++ return -ENOMEM; ++ vc4_crtc->encoder = &vc4_encoder->base; ++ vc4_encoder->base.possible_crtcs |= drm_crtc_mask(crtc) ; ++ drm_encoder_init(drm, &vc4_encoder->base, &vc4_fkms_encoder_funcs, ++ DRM_MODE_ENCODER_TMDS, NULL); ++ drm_encoder_helper_add(&vc4_encoder->base, ++ &vc4_fkms_encoder_helper_funcs); ++ ++ vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base); ++ if (IS_ERR(vc4_crtc->connector)) { ++ ret = PTR_ERR(vc4_crtc->connector); ++ goto err_destroy_encoder; ++ } ++ ++ writel(0, vc4_crtc->regs + SMICS); ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), ++ vc4_crtc_irq_handler, 0, "vc4 firmware kms", ++ vc4_crtc); ++ if (ret) ++ goto err_destroy_connector; ++ ++ platform_set_drvdata(pdev, vc4_crtc); ++ ++ return 0; ++ ++err_destroy_connector: ++ vc4_fkms_connector_destroy(vc4_crtc->connector); ++err_destroy_encoder: ++ vc4_fkms_encoder_destroy(vc4_crtc->encoder); ++ list_for_each_entry_safe(destroy_plane, temp, ++ &drm->mode_config.plane_list, head) { ++ if (destroy_plane->possible_crtcs == 1 << drm_crtc_index(crtc)) ++ destroy_plane->funcs->destroy(destroy_plane); ++ } ++err: ++ return ret; ++} ++ ++static void vc4_fkms_unbind(struct device *dev, struct device *master, ++ void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev); ++ ++ vc4_fkms_connector_destroy(vc4_crtc->connector); ++ vc4_fkms_encoder_destroy(vc4_crtc->encoder); ++ drm_crtc_cleanup(&vc4_crtc->base); ++ ++ platform_set_drvdata(pdev, NULL); ++} ++ ++static const struct component_ops vc4_fkms_ops = { ++ .bind = vc4_fkms_bind, ++ .unbind = vc4_fkms_unbind, ++}; ++ ++static int vc4_fkms_probe(struct platform_device *pdev) ++{ ++ return component_add(&pdev->dev, &vc4_fkms_ops); ++} ++ ++static int vc4_fkms_remove(struct platform_device *pdev) ++{ ++ component_del(&pdev->dev, &vc4_fkms_ops); ++ return 0; ++} ++ ++struct platform_driver vc4_firmware_kms_driver = { ++ .probe = vc4_fkms_probe, ++ .remove = vc4_fkms_remove, ++ .driver = { ++ .name = "vc4_firmware_kms", ++ .of_match_table = vc4_firmware_kms_dt_match, ++ }, ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0108-ARM-Activate-FIQs-to-avoid-__irq_startup-warnings.patch b/target/linux/brcm2708/patches-4.19/950-0108-ARM-Activate-FIQs-to-avoid-__irq_startup-warnings.patch deleted file mode 100644 index 0ec0751a02..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0108-ARM-Activate-FIQs-to-avoid-__irq_startup-warnings.patch +++ /dev/null @@ -1,36 +0,0 @@ -From ffa437377a6121234cd85d3bd2a8d8c43f0bedd5 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 11 Dec 2017 09:18:32 +0000 -Subject: [PATCH 108/806] ARM: Activate FIQs to avoid __irq_startup warnings - -There is a new test in __irq_startup that the IRQ is activated, which -hasn't been the case for FIQs since they bypass some of the usual setup. - -Augment enable_fiq to include a call to irq_activate to avoid the -warning. - -Signed-off-by: Phil Elwell ---- - arch/arm/kernel/fiq.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/arm/kernel/fiq.c -+++ b/arch/arm/kernel/fiq.c -@@ -56,6 +56,8 @@ - static unsigned long dfl_fiq_insn; - static struct pt_regs dfl_fiq_regs; - -+extern int irq_activate(struct irq_desc *desc); -+ - /* Default reacquire function - * - we always relinquish FIQ control - * - we always reacquire FIQ control -@@ -140,6 +142,8 @@ static int fiq_start; - - void enable_fiq(int fiq) - { -+ struct irq_desc *desc = irq_to_desc(fiq + fiq_start); -+ irq_activate(desc); - enable_irq(fiq + fiq_start); - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0108-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch b/target/linux/brcm2708/patches-4.19/950-0108-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch new file mode 100644 index 0000000000..a61a137cb6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0108-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch @@ -0,0 +1,24 @@ +From 15920eb72774682674a1e318146c1c009fd69e91 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 1 Feb 2017 17:09:18 -0800 +Subject: [PATCH] drm/vc4: Name the primary and cursor planes in fkms. + +This makes debugging nicer, compared to trying to remember what the +IDs are. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -265,7 +265,7 @@ static struct drm_plane *vc4_fkms_plane_ + ret = drm_universal_plane_init(dev, plane, 0xff, + &vc4_plane_funcs, + primary ? &xrgb8888 : &argb8888, 1, NULL, +- type, NULL); ++ type, primary ? "primary" : "cursor"); + + if (type == DRM_PLANE_TYPE_PRIMARY) { + vc4_plane->fbinfo = diff --git a/target/linux/brcm2708/patches-4.19/950-0109-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch b/target/linux/brcm2708/patches-4.19/950-0109-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch new file mode 100644 index 0000000000..be69fe72c7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0109-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch @@ -0,0 +1,70 @@ +From 90094103eaa17e147e30d910eb3ebdad663271be Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 1 Feb 2017 17:10:09 -0800 +Subject: [PATCH] drm/vc4: Add DRM_DEBUG_ATOMIC for the insides of + fkms. + +Trying to debug weston on fkms involved figuring out what calls I was +making to the firmware. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 26 ++++++++++++++++++++++++++ + 1 file changed, 26 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -101,6 +101,11 @@ static int vc4_plane_set_primary_blank(s + struct vc4_dev *vc4 = to_vc4_dev(plane->dev); + + u32 packet = blank; ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary plane %s", ++ plane->base.id, plane->name, ++ blank ? "blank" : "unblank"); ++ + return rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_FRAMEBUFFER_BLANK, + &packet, sizeof(packet)); +@@ -148,6 +153,16 @@ static void vc4_primary_plane_atomic_upd + WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); + } + ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%08x/%d\n", ++ plane->base.id, plane->name, ++ state->crtc_w, ++ state->crtc_h, ++ bpp, ++ state->crtc_x, ++ state->crtc_y, ++ bo->paddr + fb->offsets[0], ++ fb->pitches[0]); ++ + ret = rpi_firmware_transaction(vc4->firmware, + RPI_FIRMWARE_CHAN_FB, + vc4_plane->fbinfo_bus_addr); +@@ -176,6 +191,15 @@ static void vc4_cursor_plane_atomic_upda + 0, 0, /* hotx, hoty */}; + WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); + ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%08x/%d)", ++ plane->base.id, plane->name, ++ state->crtc_w, ++ state->crtc_h, ++ state->crtc_x, ++ state->crtc_y, ++ bo->paddr + fb->offsets[0], ++ fb->pitches[0]); ++ + ret = rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_SET_CURSOR_STATE, + &packet_state, +@@ -198,6 +222,8 @@ static void vc4_cursor_plane_atomic_disa + u32 packet_state[] = { false, 0, 0, 0 }; + int ret; + ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] disabling cursor", plane->base.id, plane->name); ++ + ret = rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_SET_CURSOR_STATE, + &packet_state, diff --git a/target/linux/brcm2708/patches-4.19/950-0109-serial-8250-bcm2835aux-suppress-EPROBE_DEFER.patch b/target/linux/brcm2708/patches-4.19/950-0109-serial-8250-bcm2835aux-suppress-EPROBE_DEFER.patch deleted file mode 100644 index 5557b9d85d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0109-serial-8250-bcm2835aux-suppress-EPROBE_DEFER.patch +++ /dev/null @@ -1,22 +0,0 @@ -From f12549c9f3aed64fae5fe2ebbc2e8568a78829a2 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 22 Jan 2018 17:26:38 +0000 -Subject: [PATCH 109/806] serial: 8250: bcm2835aux - suppress EPROBE_DEFER - -Signed-off-by: Phil Elwell ---- - drivers/tty/serial/8250/8250_bcm2835aux.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/tty/serial/8250/8250_bcm2835aux.c -+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c -@@ -50,7 +50,8 @@ static int bcm2835aux_serial_probe(struc - data->clk = devm_clk_get(&pdev->dev, NULL); - ret = PTR_ERR_OR_ZERO(data->clk); - if (ret) { -- dev_err(&pdev->dev, "could not get clk: %d\n", ret); -+ if (ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, "could not get clk: %d\n", ret); - return ret; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0110-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch b/target/linux/brcm2708/patches-4.19/950-0110-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch new file mode 100644 index 0000000000..c916ebfa96 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0110-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch @@ -0,0 +1,42 @@ +From 562e0c66203a4f679c6adf6c0df91f7233df53b1 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 2 Feb 2017 09:42:18 -0800 +Subject: [PATCH] drm/vc4: Fix sending of page flip completion events + in FKMS mode. + +In the rewrite of vc4_crtc.c for fkms, I dropped the part of the +CRTC's atomic flush handler that moved the completion event from the +proposed atomic state change to the CRTC's current state. That meant +that when full screen pageflipping happened (glxgears -fullscreen in +X, compton, por weston), the app would end up blocked firever waiting +to draw its next frame. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -336,6 +336,21 @@ static int vc4_crtc_atomic_check(struct + static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_crtc_state *old_state) + { ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ ++ if (crtc->state->event) { ++ unsigned long flags; ++ ++ crtc->state->event->pipe = drm_crtc_index(crtc); ++ ++ WARN_ON(drm_crtc_vblank_get(crtc) != 0); ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ vc4_crtc->event = crtc->state->event; ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++ } + } + + static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) diff --git a/target/linux/brcm2708/patches-4.19/950-0110-raspberrypi-firmware-Export-the-general-transaction-.patch b/target/linux/brcm2708/patches-4.19/950-0110-raspberrypi-firmware-Export-the-general-transaction-.patch deleted file mode 100644 index 945ba536eb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0110-raspberrypi-firmware-Export-the-general-transaction-.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 79d09be78f74e3c81ff25f1f78fb17a2f112e3cd Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 14 Sep 2016 09:16:19 +0100 -Subject: [PATCH 110/806] raspberrypi-firmware: Export the general transaction - function. - -The vc4-firmware-kms module is going to be doing the MBOX FB call. - -Signed-off-by: Eric Anholt ---- - drivers/firmware/raspberrypi.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/firmware/raspberrypi.c -+++ b/drivers/firmware/raspberrypi.c -@@ -45,7 +45,7 @@ static void response_callback(struct mbo - * Sends a request to the firmware through the BCM2835 mailbox driver, - * and synchronously waits for the reply. - */ --static int -+int - rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data) - { - u32 message = MBOX_MSG(chan, data); -@@ -66,6 +66,7 @@ rpi_firmware_transaction(struct rpi_firm - - return ret; - } -+EXPORT_SYMBOL_GPL(rpi_firmware_transaction); - - /** - * rpi_firmware_property_list - Submit firmware property list diff --git a/target/linux/brcm2708/patches-4.19/950-0111-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch b/target/linux/brcm2708/patches-4.19/950-0111-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch deleted file mode 100644 index 14d4ac9803..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0111-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch +++ /dev/null @@ -1,762 +0,0 @@ -From 3ddc9f2dc424c085ca646e92b40d156bb5318295 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 14 Sep 2016 08:39:33 +0100 -Subject: [PATCH 111/806] drm/vc4: Add a mode for using the closed firmware for - display. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/Makefile | 1 + - drivers/gpu/drm/vc4/vc4_crtc.c | 17 + - drivers/gpu/drm/vc4/vc4_drv.c | 1 + - drivers/gpu/drm/vc4/vc4_drv.h | 7 + - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 656 +++++++++++++++++++++++++ - 5 files changed, 682 insertions(+) - create mode 100644 drivers/gpu/drm/vc4/vc4_firmware_kms.c - ---- a/drivers/gpu/drm/vc4/Makefile -+++ b/drivers/gpu/drm/vc4/Makefile -@@ -9,6 +9,7 @@ vc4-y := \ - vc4_dpi.o \ - vc4_dsi.o \ - vc4_fence.o \ -+ vc4_firmware_kms.o \ - vc4_kms.o \ - vc4_gem.o \ - vc4_hdmi.o \ ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -133,6 +133,9 @@ bool vc4_crtc_get_scanoutpos(struct drm_ - int vblank_lines; - bool ret = false; - -+ if (vc4->firmware_kms) -+ return 0; -+ - /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ - - /* Get optional system timestamp before query. */ -@@ -761,8 +764,15 @@ static void vc4_crtc_atomic_flush(struct - - static int vc4_enable_vblank(struct drm_crtc *crtc) - { -+ struct drm_device *dev = crtc->dev; -+ struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); - -+ if (vc4->firmware_kms) { -+ /* XXX: Can we mask the SMI interrupt? */ -+ return 0; -+ } -+ - CRTC_WRITE(PV_INTEN, PV_INT_VFP_START); - - return 0; -@@ -770,8 +780,15 @@ static int vc4_enable_vblank(struct drm_ - - static void vc4_disable_vblank(struct drm_crtc *crtc) - { -+ struct drm_device *dev = crtc->dev; -+ struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); - -+ if (vc4->firmware_kms) { -+ /* XXX: Can we mask the SMI interrupt? */ -+ return; -+ } -+ - CRTC_WRITE(PV_INTEN, 0); - } - ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -347,6 +347,7 @@ static struct platform_driver *const com - &vc4_txp_driver, - &vc4_hvs_driver, - &vc4_crtc_driver, -+ &vc4_firmware_kms_driver, - &vc4_v3d_driver, - }; - ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -67,6 +67,9 @@ struct vc4_perfmon { - struct vc4_dev { - struct drm_device *dev; - -+ bool firmware_kms; -+ struct rpi_firmware *firmware; -+ - struct vc4_hdmi *hdmi; - struct vc4_hvs *hvs; - struct vc4_v3d *v3d; -@@ -719,6 +722,10 @@ int vc4_dsi_debugfs_regs(struct seq_file - /* vc4_fence.c */ - extern const struct dma_fence_ops vc4_fence_ops; - -+/* vc4_firmware_kms.c */ -+extern struct platform_driver vc4_firmware_kms_driver; -+void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); -+ - /* vc4_gem.c */ - void vc4_gem_init(struct drm_device *dev); - void vc4_gem_destroy(struct drm_device *dev); ---- /dev/null -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -0,0 +1,656 @@ -+/* -+ * Copyright (C) 2016 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/** -+ * DOC: VC4 firmware KMS module. -+ * -+ * As a hack to get us from the current closed source driver world -+ * toward a totally open stack, implement KMS on top of the Raspberry -+ * Pi's firmware display stack. -+ */ -+ -+#include "drm/drm_atomic_helper.h" -+#include "drm/drm_plane_helper.h" -+#include "drm/drm_crtc_helper.h" -+#include "linux/clk.h" -+#include "linux/debugfs.h" -+#include "drm/drm_fb_cma_helper.h" -+#include "linux/component.h" -+#include "linux/of_device.h" -+#include "vc4_drv.h" -+#include "vc4_regs.h" -+#include -+ -+/* The firmware delivers a vblank interrupt to us through the SMI -+ * hardware, which has only this one register. -+ */ -+#define SMICS 0x0 -+#define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) -+ -+struct vc4_crtc { -+ struct drm_crtc base; -+ struct drm_encoder *encoder; -+ struct drm_connector *connector; -+ void __iomem *regs; -+ -+ struct drm_pending_vblank_event *event; -+}; -+ -+static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) -+{ -+ return container_of(crtc, struct vc4_crtc, base); -+} -+ -+struct vc4_fkms_encoder { -+ struct drm_encoder base; -+}; -+ -+static inline struct vc4_fkms_encoder * -+to_vc4_fkms_encoder(struct drm_encoder *encoder) -+{ -+ return container_of(encoder, struct vc4_fkms_encoder, base); -+} -+ -+/* VC4 FKMS connector KMS struct */ -+struct vc4_fkms_connector { -+ struct drm_connector base; -+ -+ /* Since the connector is attached to just the one encoder, -+ * this is the reference to it so we can do the best_encoder() -+ * hook. -+ */ -+ struct drm_encoder *encoder; -+}; -+ -+static inline struct vc4_fkms_connector * -+to_vc4_fkms_connector(struct drm_connector *connector) -+{ -+ return container_of(connector, struct vc4_fkms_connector, base); -+} -+ -+/* Firmware's structure for making an FB mbox call. */ -+struct fbinfo_s { -+ u32 xres, yres, xres_virtual, yres_virtual; -+ u32 pitch, bpp; -+ u32 xoffset, yoffset; -+ u32 base; -+ u32 screen_size; -+ u16 cmap[256]; -+}; -+ -+struct vc4_fkms_plane { -+ struct drm_plane base; -+ struct fbinfo_s *fbinfo; -+ dma_addr_t fbinfo_bus_addr; -+ u32 pitch; -+}; -+ -+static inline struct vc4_fkms_plane *to_vc4_fkms_plane(struct drm_plane *plane) -+{ -+ return (struct vc4_fkms_plane *)plane; -+} -+ -+/* Turns the display on/off. */ -+static int vc4_plane_set_primary_blank(struct drm_plane *plane, bool blank) -+{ -+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ -+ u32 packet = blank; -+ return rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_FRAMEBUFFER_BLANK, -+ &packet, sizeof(packet)); -+} -+ -+static void vc4_primary_plane_atomic_update(struct drm_plane *plane, -+ struct drm_plane_state *old_state) -+{ -+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); -+ struct drm_plane_state *state = plane->state; -+ struct drm_framebuffer *fb = state->fb; -+ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -+ volatile struct fbinfo_s *fbinfo = vc4_plane->fbinfo; -+ u32 bpp = 32; -+ int ret; -+ -+ vc4_plane_set_primary_blank(plane, false); -+ -+ fbinfo->xres = state->crtc_w; -+ fbinfo->yres = state->crtc_h; -+ fbinfo->xres_virtual = state->crtc_w; -+ fbinfo->yres_virtual = state->crtc_h; -+ fbinfo->bpp = bpp; -+ fbinfo->xoffset = state->crtc_x; -+ fbinfo->yoffset = state->crtc_y; -+ fbinfo->base = bo->paddr + fb->offsets[0]; -+ fbinfo->pitch = fb->pitches[0]; -+ /* A bug in the firmware makes it so that if the fb->base is -+ * set to nonzero, the configured pitch gets overwritten with -+ * the previous pitch. So, to get the configured pitch -+ * recomputed, we have to make it allocate itself a new buffer -+ * in VC memory, first. -+ */ -+ if (vc4_plane->pitch != fb->pitches[0]) { -+ u32 saved_base = fbinfo->base; -+ fbinfo->base = 0; -+ -+ ret = rpi_firmware_transaction(vc4->firmware, -+ RPI_FIRMWARE_CHAN_FB, -+ vc4_plane->fbinfo_bus_addr); -+ fbinfo->base = saved_base; -+ -+ vc4_plane->pitch = fbinfo->pitch; -+ WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); -+ } -+ -+ ret = rpi_firmware_transaction(vc4->firmware, -+ RPI_FIRMWARE_CHAN_FB, -+ vc4_plane->fbinfo_bus_addr); -+ WARN_ON_ONCE(fbinfo->pitch != fb->pitches[0]); -+ WARN_ON_ONCE(fbinfo->base != bo->paddr + fb->offsets[0]); -+} -+ -+static void vc4_primary_plane_atomic_disable(struct drm_plane *plane, -+ struct drm_plane_state *old_state) -+{ -+ vc4_plane_set_primary_blank(plane, true); -+} -+ -+static void vc4_cursor_plane_atomic_update(struct drm_plane *plane, -+ struct drm_plane_state *old_state) -+{ -+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ struct drm_plane_state *state = plane->state; -+ struct drm_framebuffer *fb = state->fb; -+ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -+ int ret; -+ u32 packet_state[] = { true, state->crtc_x, state->crtc_y, 0 }; -+ u32 packet_info[] = { state->crtc_w, state->crtc_h, -+ 0, /* unused */ -+ bo->paddr + fb->offsets[0], -+ 0, 0, /* hotx, hoty */}; -+ WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_SET_CURSOR_STATE, -+ &packet_state, -+ sizeof(packet_state)); -+ if (ret || packet_state[0] != 0) -+ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_SET_CURSOR_INFO, -+ &packet_info, -+ sizeof(packet_info)); -+ if (ret || packet_info[0] != 0) -+ DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); -+} -+ -+static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, -+ struct drm_plane_state *old_state) -+{ -+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ u32 packet_state[] = { false, 0, 0, 0 }; -+ int ret; -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_SET_CURSOR_STATE, -+ &packet_state, -+ sizeof(packet_state)); -+ if (ret || packet_state[0] != 0) -+ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); -+} -+ -+static int vc4_plane_atomic_check(struct drm_plane *plane, -+ struct drm_plane_state *state) -+{ -+ return 0; -+} -+ -+static void vc4_plane_destroy(struct drm_plane *plane) -+{ -+ drm_plane_helper_disable(plane); -+ drm_plane_cleanup(plane); -+} -+ -+static const struct drm_plane_funcs vc4_plane_funcs = { -+ .update_plane = drm_atomic_helper_update_plane, -+ .disable_plane = drm_atomic_helper_disable_plane, -+ .destroy = vc4_plane_destroy, -+ .set_property = NULL, -+ .reset = drm_atomic_helper_plane_reset, -+ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, -+ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, -+}; -+ -+static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { -+ .prepare_fb = NULL, -+ .cleanup_fb = NULL, -+ .atomic_check = vc4_plane_atomic_check, -+ .atomic_update = vc4_primary_plane_atomic_update, -+ .atomic_disable = vc4_primary_plane_atomic_disable, -+}; -+ -+static const struct drm_plane_helper_funcs vc4_cursor_plane_helper_funcs = { -+ .prepare_fb = NULL, -+ .cleanup_fb = NULL, -+ .atomic_check = vc4_plane_atomic_check, -+ .atomic_update = vc4_cursor_plane_atomic_update, -+ .atomic_disable = vc4_cursor_plane_atomic_disable, -+}; -+ -+static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, -+ enum drm_plane_type type) -+{ -+ struct drm_plane *plane = NULL; -+ struct vc4_fkms_plane *vc4_plane; -+ u32 xrgb8888 = DRM_FORMAT_XRGB8888; -+ u32 argb8888 = DRM_FORMAT_ARGB8888; -+ int ret = 0; -+ bool primary = (type == DRM_PLANE_TYPE_PRIMARY); -+ -+ vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), -+ GFP_KERNEL); -+ if (!vc4_plane) { -+ ret = -ENOMEM; -+ goto fail; -+ } -+ -+ plane = &vc4_plane->base; -+ ret = drm_universal_plane_init(dev, plane, 0xff, -+ &vc4_plane_funcs, -+ primary ? &xrgb8888 : &argb8888, 1, NULL, -+ type, NULL); -+ -+ if (type == DRM_PLANE_TYPE_PRIMARY) { -+ vc4_plane->fbinfo = -+ dma_alloc_coherent(dev->dev, -+ sizeof(*vc4_plane->fbinfo), -+ &vc4_plane->fbinfo_bus_addr, -+ GFP_KERNEL); -+ memset(vc4_plane->fbinfo, 0, sizeof(*vc4_plane->fbinfo)); -+ -+ drm_plane_helper_add(plane, &vc4_primary_plane_helper_funcs); -+ } else { -+ drm_plane_helper_add(plane, &vc4_cursor_plane_helper_funcs); -+ } -+ -+ return plane; -+fail: -+ if (plane) -+ vc4_plane_destroy(plane); -+ -+ return ERR_PTR(ret); -+} -+ -+static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) -+{ -+ /* Everyting is handled in the planes. */ -+} -+ -+static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) -+{ -+} -+ -+static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) -+{ -+} -+ -+static int vc4_crtc_atomic_check(struct drm_crtc *crtc, -+ struct drm_crtc_state *state) -+{ -+ return 0; -+} -+ -+static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, -+ struct drm_crtc_state *old_state) -+{ -+} -+ -+static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) -+{ -+ struct drm_crtc *crtc = &vc4_crtc->base; -+ struct drm_device *dev = crtc->dev; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&dev->event_lock, flags); -+ if (vc4_crtc->event) { -+ drm_crtc_send_vblank_event(crtc, vc4_crtc->event); -+ vc4_crtc->event = NULL; -+ drm_crtc_vblank_put(crtc); -+ } -+ spin_unlock_irqrestore(&dev->event_lock, flags); -+} -+ -+static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) -+{ -+ struct vc4_crtc *vc4_crtc = data; -+ u32 stat = readl(vc4_crtc->regs + SMICS); -+ irqreturn_t ret = IRQ_NONE; -+ -+ if (stat & SMICS_INTERRUPTS) { -+ writel(0, vc4_crtc->regs + SMICS); -+ drm_crtc_handle_vblank(&vc4_crtc->base); -+ vc4_crtc_handle_page_flip(vc4_crtc); -+ ret = IRQ_HANDLED; -+ } -+ -+ return ret; -+} -+ -+static int vc4_page_flip(struct drm_crtc *crtc, -+ struct drm_framebuffer *fb, -+ struct drm_pending_vblank_event *event, -+ uint32_t flags, struct drm_modeset_acquire_ctx *ctx) -+{ -+ if (flags & DRM_MODE_PAGE_FLIP_ASYNC) { -+ DRM_ERROR("Async flips aren't allowed\n"); -+ return -EINVAL; -+ } -+ -+ return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx); -+} -+ -+static const struct drm_crtc_funcs vc4_crtc_funcs = { -+ .set_config = drm_atomic_helper_set_config, -+ .destroy = drm_crtc_cleanup, -+ .page_flip = vc4_page_flip, -+ .set_property = NULL, -+ .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ -+ .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ -+ .reset = drm_atomic_helper_crtc_reset, -+ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, -+ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, -+}; -+ -+static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { -+ .mode_set_nofb = vc4_crtc_mode_set_nofb, -+ .atomic_disable = vc4_crtc_disable, -+ .atomic_enable = vc4_crtc_enable, -+ .atomic_check = vc4_crtc_atomic_check, -+ .atomic_flush = vc4_crtc_atomic_flush, -+}; -+ -+/* Frees the page flip event when the DRM device is closed with the -+ * event still outstanding. -+ */ -+void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) -+{ -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ struct drm_device *dev = crtc->dev; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&dev->event_lock, flags); -+ -+ if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) { -+ kfree(&vc4_crtc->event->base); -+ drm_crtc_vblank_put(crtc); -+ vc4_crtc->event = NULL; -+ } -+ -+ spin_unlock_irqrestore(&dev->event_lock, flags); -+} -+ -+static const struct of_device_id vc4_firmware_kms_dt_match[] = { -+ { .compatible = "raspberrypi,rpi-firmware-kms" }, -+ {} -+}; -+ -+static enum drm_connector_status -+vc4_fkms_connector_detect(struct drm_connector *connector, bool force) -+{ -+ return connector_status_connected; -+} -+ -+static int vc4_fkms_connector_get_modes(struct drm_connector *connector) -+{ -+ struct drm_device *dev = connector->dev; -+ struct vc4_dev *vc4 = to_vc4_dev(dev); -+ u32 wh[2] = {0, 0}; -+ int ret; -+ struct drm_display_mode *mode; -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, -+ &wh, sizeof(wh)); -+ if (ret) { -+ DRM_ERROR("Failed to get screen size: %d (0x%08x 0x%08x)\n", -+ ret, wh[0], wh[1]); -+ return 0; -+ } -+ -+ mode = drm_cvt_mode(dev, wh[0], wh[1], 60 /* vrefresh */, -+ 0, 0, false); -+ drm_mode_probed_add(connector, mode); -+ -+ return 1; -+} -+ -+static struct drm_encoder * -+vc4_fkms_connector_best_encoder(struct drm_connector *connector) -+{ -+ struct vc4_fkms_connector *fkms_connector = -+ to_vc4_fkms_connector(connector); -+ return fkms_connector->encoder; -+} -+ -+static void vc4_fkms_connector_destroy(struct drm_connector *connector) -+{ -+ drm_connector_unregister(connector); -+ drm_connector_cleanup(connector); -+} -+ -+static const struct drm_connector_funcs vc4_fkms_connector_funcs = { -+ .detect = vc4_fkms_connector_detect, -+ .fill_modes = drm_helper_probe_single_connector_modes, -+ .destroy = vc4_fkms_connector_destroy, -+ .reset = drm_atomic_helper_connector_reset, -+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, -+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -+}; -+ -+static const struct drm_connector_helper_funcs vc4_fkms_connector_helper_funcs = { -+ .get_modes = vc4_fkms_connector_get_modes, -+ .best_encoder = vc4_fkms_connector_best_encoder, -+}; -+ -+static struct drm_connector *vc4_fkms_connector_init(struct drm_device *dev, -+ struct drm_encoder *encoder) -+{ -+ struct drm_connector *connector = NULL; -+ struct vc4_fkms_connector *fkms_connector; -+ int ret = 0; -+ -+ fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), -+ GFP_KERNEL); -+ if (!fkms_connector) { -+ ret = -ENOMEM; -+ goto fail; -+ } -+ connector = &fkms_connector->base; -+ -+ fkms_connector->encoder = encoder; -+ -+ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, -+ DRM_MODE_CONNECTOR_HDMIA); -+ drm_connector_helper_add(connector, &vc4_fkms_connector_helper_funcs); -+ -+ connector->polled = (DRM_CONNECTOR_POLL_CONNECT | -+ DRM_CONNECTOR_POLL_DISCONNECT); -+ -+ connector->interlace_allowed = 0; -+ connector->doublescan_allowed = 0; -+ -+ drm_mode_connector_attach_encoder(connector, encoder); -+ -+ return connector; -+ -+ fail: -+ if (connector) -+ vc4_fkms_connector_destroy(connector); -+ -+ return ERR_PTR(ret); -+} -+ -+static void vc4_fkms_encoder_destroy(struct drm_encoder *encoder) -+{ -+ drm_encoder_cleanup(encoder); -+} -+ -+static const struct drm_encoder_funcs vc4_fkms_encoder_funcs = { -+ .destroy = vc4_fkms_encoder_destroy, -+}; -+ -+static void vc4_fkms_encoder_enable(struct drm_encoder *encoder) -+{ -+} -+ -+static void vc4_fkms_encoder_disable(struct drm_encoder *encoder) -+{ -+} -+ -+static const struct drm_encoder_helper_funcs vc4_fkms_encoder_helper_funcs = { -+ .enable = vc4_fkms_encoder_enable, -+ .disable = vc4_fkms_encoder_disable, -+}; -+ -+static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct drm_device *drm = dev_get_drvdata(master); -+ struct vc4_dev *vc4 = to_vc4_dev(drm); -+ struct vc4_crtc *vc4_crtc; -+ struct vc4_fkms_encoder *vc4_encoder; -+ struct drm_crtc *crtc; -+ struct drm_plane *primary_plane, *cursor_plane, *destroy_plane, *temp; -+ struct device_node *firmware_node; -+ int ret; -+ -+ vc4->firmware_kms = true; -+ -+ vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); -+ if (!vc4_crtc) -+ return -ENOMEM; -+ crtc = &vc4_crtc->base; -+ -+ firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); -+ vc4->firmware = rpi_firmware_get(firmware_node); -+ if (!vc4->firmware) { -+ DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); -+ return -EPROBE_DEFER; -+ } -+ of_node_put(firmware_node); -+ -+ /* Map the SMI interrupt reg */ -+ vc4_crtc->regs = vc4_ioremap_regs(pdev, 0); -+ if (IS_ERR(vc4_crtc->regs)) -+ return PTR_ERR(vc4_crtc->regs); -+ -+ /* For now, we create just the primary and the legacy cursor -+ * planes. We should be able to stack more planes on easily, -+ * but to do that we would need to compute the bandwidth -+ * requirement of the plane configuration, and reject ones -+ * that will take too much. -+ */ -+ primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY); -+ if (IS_ERR(primary_plane)) { -+ dev_err(dev, "failed to construct primary plane\n"); -+ ret = PTR_ERR(primary_plane); -+ goto err; -+ } -+ -+ cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR); -+ if (IS_ERR(cursor_plane)) { -+ dev_err(dev, "failed to construct cursor plane\n"); -+ ret = PTR_ERR(cursor_plane); -+ goto err; -+ } -+ -+ drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane, -+ &vc4_crtc_funcs, NULL); -+ drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); -+ primary_plane->crtc = crtc; -+ cursor_plane->crtc = crtc; -+ -+ vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); -+ if (!vc4_encoder) -+ return -ENOMEM; -+ vc4_crtc->encoder = &vc4_encoder->base; -+ vc4_encoder->base.possible_crtcs |= drm_crtc_mask(crtc) ; -+ drm_encoder_init(drm, &vc4_encoder->base, &vc4_fkms_encoder_funcs, -+ DRM_MODE_ENCODER_TMDS, NULL); -+ drm_encoder_helper_add(&vc4_encoder->base, -+ &vc4_fkms_encoder_helper_funcs); -+ -+ vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base); -+ if (IS_ERR(vc4_crtc->connector)) { -+ ret = PTR_ERR(vc4_crtc->connector); -+ goto err_destroy_encoder; -+ } -+ -+ writel(0, vc4_crtc->regs + SMICS); -+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), -+ vc4_crtc_irq_handler, 0, "vc4 firmware kms", -+ vc4_crtc); -+ if (ret) -+ goto err_destroy_connector; -+ -+ platform_set_drvdata(pdev, vc4_crtc); -+ -+ return 0; -+ -+err_destroy_connector: -+ vc4_fkms_connector_destroy(vc4_crtc->connector); -+err_destroy_encoder: -+ vc4_fkms_encoder_destroy(vc4_crtc->encoder); -+ list_for_each_entry_safe(destroy_plane, temp, -+ &drm->mode_config.plane_list, head) { -+ if (destroy_plane->possible_crtcs == 1 << drm_crtc_index(crtc)) -+ destroy_plane->funcs->destroy(destroy_plane); -+ } -+err: -+ return ret; -+} -+ -+static void vc4_fkms_unbind(struct device *dev, struct device *master, -+ void *data) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev); -+ -+ vc4_fkms_connector_destroy(vc4_crtc->connector); -+ vc4_fkms_encoder_destroy(vc4_crtc->encoder); -+ drm_crtc_cleanup(&vc4_crtc->base); -+ -+ platform_set_drvdata(pdev, NULL); -+} -+ -+static const struct component_ops vc4_fkms_ops = { -+ .bind = vc4_fkms_bind, -+ .unbind = vc4_fkms_unbind, -+}; -+ -+static int vc4_fkms_probe(struct platform_device *pdev) -+{ -+ return component_add(&pdev->dev, &vc4_fkms_ops); -+} -+ -+static int vc4_fkms_remove(struct platform_device *pdev) -+{ -+ component_del(&pdev->dev, &vc4_fkms_ops); -+ return 0; -+} -+ -+struct platform_driver vc4_firmware_kms_driver = { -+ .probe = vc4_fkms_probe, -+ .remove = vc4_fkms_remove, -+ .driver = { -+ .name = "vc4_firmware_kms", -+ .of_match_table = vc4_firmware_kms_dt_match, -+ }, -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0111-drm-vc4-Add-support-for-setting-DPMS-in-firmwarekms.patch b/target/linux/brcm2708/patches-4.19/950-0111-drm-vc4-Add-support-for-setting-DPMS-in-firmwarekms.patch new file mode 100644 index 0000000000..2a52b0f98a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0111-drm-vc4-Add-support-for-setting-DPMS-in-firmwarekms.patch @@ -0,0 +1,103 @@ +From c95479213d28d9866e617a54b0435c974874ce9d Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 6 Jul 2017 11:45:48 -0700 +Subject: [PATCH] drm/vc4: Add support for setting DPMS in firmwarekms. + +This ensures that the screen goes blank during DPMS (screensaver), +including the cursor. Planes don't necessarily get disabled during +CRTC disable, so we need to be careful to not leave them on or turn +them back on early. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 40 ++++++++++++++++++++++++-- + 1 file changed, 37 insertions(+), 3 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -36,6 +36,8 @@ struct vc4_crtc { + struct drm_crtc base; + struct drm_encoder *encoder; + struct drm_connector *connector; ++ struct drm_plane *primary; ++ struct drm_plane *cursor; + void __iomem *regs; + + struct drm_pending_vblank_event *event; +@@ -123,8 +125,6 @@ static void vc4_primary_plane_atomic_upd + u32 bpp = 32; + int ret; + +- vc4_plane_set_primary_blank(plane, false); +- + fbinfo->xres = state->crtc_w; + fbinfo->yres = state->crtc_h; + fbinfo->xres_virtual = state->crtc_w; +@@ -168,6 +168,12 @@ static void vc4_primary_plane_atomic_upd + vc4_plane->fbinfo_bus_addr); + WARN_ON_ONCE(fbinfo->pitch != fb->pitches[0]); + WARN_ON_ONCE(fbinfo->base != bo->paddr + fb->offsets[0]); ++ ++ /* If the CRTC is on (or going to be on) and we're enabled, ++ * then unblank. Otherwise, stay blank until CRTC enable. ++ */ ++ if (state->crtc->state->active) ++ vc4_plane_set_primary_blank(plane, false); + } + + static void vc4_primary_plane_atomic_disable(struct drm_plane *plane, +@@ -184,7 +190,12 @@ static void vc4_cursor_plane_atomic_upda + struct drm_framebuffer *fb = state->fb; + struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); + int ret; +- u32 packet_state[] = { true, state->crtc_x, state->crtc_y, 0 }; ++ u32 packet_state[] = { ++ state->crtc->state->active, ++ state->crtc_x, ++ state->crtc_y, ++ 0 ++ }; + u32 packet_info[] = { state->crtc_w, state->crtc_h, + 0, /* unused */ + bo->paddr + fb->offsets[0], +@@ -321,10 +332,30 @@ static void vc4_crtc_mode_set_nofb(struc + + static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ ++ /* Always turn the planes off on CRTC disable. In DRM, planes ++ * are enabled/disabled through the update/disable hooks ++ * above, and the CRTC enable/disable independently controls ++ * whether anything scans out at all, but the firmware doesn't ++ * give us a CRTC-level control for that. ++ */ ++ vc4_cursor_plane_atomic_disable(vc4_crtc->cursor, ++ vc4_crtc->cursor->state); ++ vc4_plane_set_primary_blank(vc4_crtc->primary, true); + } + + static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ ++ /* Unblank the planes (if they're supposed to be displayed). */ ++ if (vc4_crtc->primary->state->fb) ++ vc4_plane_set_primary_blank(vc4_crtc->primary, false); ++ if (vc4_crtc->cursor->state->fb) { ++ vc4_cursor_plane_atomic_update(vc4_crtc->cursor, ++ vc4_crtc->cursor->state); ++ } + } + + static int vc4_crtc_atomic_check(struct drm_crtc *crtc, +@@ -618,6 +649,9 @@ static int vc4_fkms_bind(struct device * + primary_plane->crtc = crtc; + cursor_plane->crtc = crtc; + ++ vc4_crtc->primary = primary_plane; ++ vc4_crtc->cursor = cursor_plane; ++ + vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); + if (!vc4_encoder) + return -ENOMEM; diff --git a/target/linux/brcm2708/patches-4.19/950-0112-drm-vc4-Add-FB-modifier-support-to-firmwarekms.patch b/target/linux/brcm2708/patches-4.19/950-0112-drm-vc4-Add-FB-modifier-support-to-firmwarekms.patch new file mode 100644 index 0000000000..94a180f061 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0112-drm-vc4-Add-FB-modifier-support-to-firmwarekms.patch @@ -0,0 +1,32 @@ +From 94db315153c83753aded66cf3ea1de2b95d37628 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 7 Jun 2017 14:39:49 -0700 +Subject: [PATCH] drm/vc4: Add FB modifier support to firmwarekms. + +Signed-off-by: Eric Anholt +(cherry picked from commit 11752d73488e08aaeb65fe8289a9c016acde26c2) +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -17,6 +17,7 @@ + #include "drm/drm_atomic_helper.h" + #include "drm/drm_plane_helper.h" + #include "drm/drm_crtc_helper.h" ++#include "drm/drm_fourcc.h" + #include "linux/clk.h" + #include "linux/debugfs.h" + #include "drm/drm_fb_cma_helper.h" +@@ -134,6 +135,10 @@ static void vc4_primary_plane_atomic_upd + fbinfo->yoffset = state->crtc_y; + fbinfo->base = bo->paddr + fb->offsets[0]; + fbinfo->pitch = fb->pitches[0]; ++ ++ if (fb->modifier == DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED) ++ fbinfo->bpp |= BIT(31); ++ + /* A bug in the firmware makes it so that if the fb->base is + * set to nonzero, the configured pitch gets overwritten with + * the previous pitch. So, to get the configured pitch diff --git a/target/linux/brcm2708/patches-4.19/950-0112-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch b/target/linux/brcm2708/patches-4.19/950-0112-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch deleted file mode 100644 index 70b8aa22d7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0112-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 15920eb72774682674a1e318146c1c009fd69e91 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 1 Feb 2017 17:09:18 -0800 -Subject: [PATCH 112/806] drm/vc4: Name the primary and cursor planes in fkms. - -This makes debugging nicer, compared to trying to remember what the -IDs are. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -265,7 +265,7 @@ static struct drm_plane *vc4_fkms_plane_ - ret = drm_universal_plane_init(dev, plane, 0xff, - &vc4_plane_funcs, - primary ? &xrgb8888 : &argb8888, 1, NULL, -- type, NULL); -+ type, primary ? "primary" : "cursor"); - - if (type == DRM_PLANE_TYPE_PRIMARY) { - vc4_plane->fbinfo = diff --git a/target/linux/brcm2708/patches-4.19/950-0113-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch b/target/linux/brcm2708/patches-4.19/950-0113-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch deleted file mode 100644 index 32e966c29d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0113-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 90094103eaa17e147e30d910eb3ebdad663271be Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 1 Feb 2017 17:10:09 -0800 -Subject: [PATCH 113/806] drm/vc4: Add DRM_DEBUG_ATOMIC for the insides of - fkms. - -Trying to debug weston on fkms involved figuring out what calls I was -making to the firmware. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 26 ++++++++++++++++++++++++++ - 1 file changed, 26 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -101,6 +101,11 @@ static int vc4_plane_set_primary_blank(s - struct vc4_dev *vc4 = to_vc4_dev(plane->dev); - - u32 packet = blank; -+ -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary plane %s", -+ plane->base.id, plane->name, -+ blank ? "blank" : "unblank"); -+ - return rpi_firmware_property(vc4->firmware, - RPI_FIRMWARE_FRAMEBUFFER_BLANK, - &packet, sizeof(packet)); -@@ -148,6 +153,16 @@ static void vc4_primary_plane_atomic_upd - WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); - } - -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%08x/%d\n", -+ plane->base.id, plane->name, -+ state->crtc_w, -+ state->crtc_h, -+ bpp, -+ state->crtc_x, -+ state->crtc_y, -+ bo->paddr + fb->offsets[0], -+ fb->pitches[0]); -+ - ret = rpi_firmware_transaction(vc4->firmware, - RPI_FIRMWARE_CHAN_FB, - vc4_plane->fbinfo_bus_addr); -@@ -176,6 +191,15 @@ static void vc4_cursor_plane_atomic_upda - 0, 0, /* hotx, hoty */}; - WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); - -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%08x/%d)", -+ plane->base.id, plane->name, -+ state->crtc_w, -+ state->crtc_h, -+ state->crtc_x, -+ state->crtc_y, -+ bo->paddr + fb->offsets[0], -+ fb->pitches[0]); -+ - ret = rpi_firmware_property(vc4->firmware, - RPI_FIRMWARE_SET_CURSOR_STATE, - &packet_state, -@@ -198,6 +222,8 @@ static void vc4_cursor_plane_atomic_disa - u32 packet_state[] = { false, 0, 0, 0 }; - int ret; - -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] disabling cursor", plane->base.id, plane->name); -+ - ret = rpi_firmware_property(vc4->firmware, - RPI_FIRMWARE_SET_CURSOR_STATE, - &packet_state, diff --git a/target/linux/brcm2708/patches-4.19/950-0113-drm-vc4-Add-missing-enable-disable-vblank-handlers-i.patch b/target/linux/brcm2708/patches-4.19/950-0113-drm-vc4-Add-missing-enable-disable-vblank-handlers-i.patch new file mode 100644 index 0000000000..fbccc12e8f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0113-drm-vc4-Add-missing-enable-disable-vblank-handlers-i.patch @@ -0,0 +1,79 @@ +From 10d8194f8415a69d3ea049450e86e14572591a71 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Tue, 30 Jan 2018 14:21:02 -0800 +Subject: [PATCH] drm/vc4: Add missing enable/disable vblank handlers + in fkms. + +Fixes hang at boot in 4.14. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 14 -------------- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +++++++++++++++ + 2 files changed, 15 insertions(+), 14 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -764,15 +764,8 @@ static void vc4_crtc_atomic_flush(struct + + static int vc4_enable_vblank(struct drm_crtc *crtc) + { +- struct drm_device *dev = crtc->dev; +- struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + +- if (vc4->firmware_kms) { +- /* XXX: Can we mask the SMI interrupt? */ +- return 0; +- } +- + CRTC_WRITE(PV_INTEN, PV_INT_VFP_START); + + return 0; +@@ -780,15 +773,8 @@ static int vc4_enable_vblank(struct drm_ + + static void vc4_disable_vblank(struct drm_crtc *crtc) + { +- struct drm_device *dev = crtc->dev; +- struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + +- if (vc4->firmware_kms) { +- /* XXX: Can we mask the SMI interrupt? */ +- return; +- } +- + CRTC_WRITE(PV_INTEN, 0); + } + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -433,6 +433,19 @@ static int vc4_page_flip(struct drm_crtc + return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx); + } + ++static int vc4_fkms_enable_vblank(struct drm_crtc *crtc) ++{ ++ /* XXX: Need a way to enable/disable the interrupt, to avoid ++ * DRM warnings at boot time. ++ */ ++ ++ return 0; ++} ++ ++static void vc4_fkms_disable_vblank(struct drm_crtc *crtc) ++{ ++} ++ + static const struct drm_crtc_funcs vc4_crtc_funcs = { + .set_config = drm_atomic_helper_set_config, + .destroy = drm_crtc_cleanup, +@@ -443,6 +456,8 @@ static const struct drm_crtc_funcs vc4_c + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, ++ .enable_vblank = vc4_fkms_enable_vblank, ++ .disable_vblank = vc4_fkms_disable_vblank, + }; + + static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { diff --git a/target/linux/brcm2708/patches-4.19/950-0114-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch b/target/linux/brcm2708/patches-4.19/950-0114-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch deleted file mode 100644 index 1074decad3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0114-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 562e0c66203a4f679c6adf6c0df91f7233df53b1 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 2 Feb 2017 09:42:18 -0800 -Subject: [PATCH 114/806] drm/vc4: Fix sending of page flip completion events - in FKMS mode. - -In the rewrite of vc4_crtc.c for fkms, I dropped the part of the -CRTC's atomic flush handler that moved the completion event from the -proposed atomic state change to the CRTC's current state. That meant -that when full screen pageflipping happened (glxgears -fullscreen in -X, compton, por weston), the app would end up blocked firever waiting -to draw its next frame. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -336,6 +336,21 @@ static int vc4_crtc_atomic_check(struct - static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state) - { -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ struct drm_device *dev = crtc->dev; -+ -+ if (crtc->state->event) { -+ unsigned long flags; -+ -+ crtc->state->event->pipe = drm_crtc_index(crtc); -+ -+ WARN_ON(drm_crtc_vblank_get(crtc) != 0); -+ -+ spin_lock_irqsave(&dev->event_lock, flags); -+ vc4_crtc->event = crtc->state->event; -+ crtc->state->event = NULL; -+ spin_unlock_irqrestore(&dev->event_lock, flags); -+ } - } - - static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) diff --git a/target/linux/brcm2708/patches-4.19/950-0114-vc4_fkms-Apply-firmware-overscan-offset-to-hardware-.patch b/target/linux/brcm2708/patches-4.19/950-0114-vc4_fkms-Apply-firmware-overscan-offset-to-hardware-.patch new file mode 100644 index 0000000000..764edb66ff --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0114-vc4_fkms-Apply-firmware-overscan-offset-to-hardware-.patch @@ -0,0 +1,57 @@ +From 5ef3d566615961b75f85868b028193bb54727140 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 18 Apr 2017 21:43:46 +0100 +Subject: [PATCH] vc4_fkms: Apply firmware overscan offset to hardware + cursor + +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -42,6 +42,7 @@ struct vc4_crtc { + void __iomem *regs; + + struct drm_pending_vblank_event *event; ++ u32 overscan[4]; + }; + + static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) +@@ -191,6 +192,7 @@ static void vc4_cursor_plane_atomic_upda + struct drm_plane_state *old_state) + { + struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(plane->crtc); + struct drm_plane_state *state = plane->state; + struct drm_framebuffer *fb = state->fb; + struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); +@@ -216,6 +218,12 @@ static void vc4_cursor_plane_atomic_upda + bo->paddr + fb->offsets[0], + fb->pitches[0]); + ++ /* add on the top/left offsets when overscan is active */ ++ if (vc4_crtc) { ++ packet_state[1] += vc4_crtc->overscan[0]; ++ packet_state[2] += vc4_crtc->overscan[1]; ++ } ++ + ret = rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_SET_CURSOR_STATE, + &packet_state, +@@ -695,6 +703,15 @@ static int vc4_fkms_bind(struct device * + if (ret) + goto err_destroy_connector; + ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN, ++ &vc4_crtc->overscan, ++ sizeof(vc4_crtc->overscan)); ++ if (ret) { ++ DRM_ERROR("Failed to get overscan state: 0x%08x\n", vc4_crtc->overscan[0]); ++ memset(&vc4_crtc->overscan, 0, sizeof(vc4_crtc->overscan)); ++ } ++ + platform_set_drvdata(pdev, vc4_crtc); + + return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0115-drm-vc4-Add-support-for-setting-DPMS-in-firmwarekms.patch b/target/linux/brcm2708/patches-4.19/950-0115-drm-vc4-Add-support-for-setting-DPMS-in-firmwarekms.patch deleted file mode 100644 index 82bcbb396f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0115-drm-vc4-Add-support-for-setting-DPMS-in-firmwarekms.patch +++ /dev/null @@ -1,103 +0,0 @@ -From c95479213d28d9866e617a54b0435c974874ce9d Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 6 Jul 2017 11:45:48 -0700 -Subject: [PATCH 115/806] drm/vc4: Add support for setting DPMS in firmwarekms. - -This ensures that the screen goes blank during DPMS (screensaver), -including the cursor. Planes don't necessarily get disabled during -CRTC disable, so we need to be careful to not leave them on or turn -them back on early. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 40 ++++++++++++++++++++++++-- - 1 file changed, 37 insertions(+), 3 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -36,6 +36,8 @@ struct vc4_crtc { - struct drm_crtc base; - struct drm_encoder *encoder; - struct drm_connector *connector; -+ struct drm_plane *primary; -+ struct drm_plane *cursor; - void __iomem *regs; - - struct drm_pending_vblank_event *event; -@@ -123,8 +125,6 @@ static void vc4_primary_plane_atomic_upd - u32 bpp = 32; - int ret; - -- vc4_plane_set_primary_blank(plane, false); -- - fbinfo->xres = state->crtc_w; - fbinfo->yres = state->crtc_h; - fbinfo->xres_virtual = state->crtc_w; -@@ -168,6 +168,12 @@ static void vc4_primary_plane_atomic_upd - vc4_plane->fbinfo_bus_addr); - WARN_ON_ONCE(fbinfo->pitch != fb->pitches[0]); - WARN_ON_ONCE(fbinfo->base != bo->paddr + fb->offsets[0]); -+ -+ /* If the CRTC is on (or going to be on) and we're enabled, -+ * then unblank. Otherwise, stay blank until CRTC enable. -+ */ -+ if (state->crtc->state->active) -+ vc4_plane_set_primary_blank(plane, false); - } - - static void vc4_primary_plane_atomic_disable(struct drm_plane *plane, -@@ -184,7 +190,12 @@ static void vc4_cursor_plane_atomic_upda - struct drm_framebuffer *fb = state->fb; - struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); - int ret; -- u32 packet_state[] = { true, state->crtc_x, state->crtc_y, 0 }; -+ u32 packet_state[] = { -+ state->crtc->state->active, -+ state->crtc_x, -+ state->crtc_y, -+ 0 -+ }; - u32 packet_info[] = { state->crtc_w, state->crtc_h, - 0, /* unused */ - bo->paddr + fb->offsets[0], -@@ -321,10 +332,30 @@ static void vc4_crtc_mode_set_nofb(struc - - static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ -+ /* Always turn the planes off on CRTC disable. In DRM, planes -+ * are enabled/disabled through the update/disable hooks -+ * above, and the CRTC enable/disable independently controls -+ * whether anything scans out at all, but the firmware doesn't -+ * give us a CRTC-level control for that. -+ */ -+ vc4_cursor_plane_atomic_disable(vc4_crtc->cursor, -+ vc4_crtc->cursor->state); -+ vc4_plane_set_primary_blank(vc4_crtc->primary, true); - } - - static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ -+ /* Unblank the planes (if they're supposed to be displayed). */ -+ if (vc4_crtc->primary->state->fb) -+ vc4_plane_set_primary_blank(vc4_crtc->primary, false); -+ if (vc4_crtc->cursor->state->fb) { -+ vc4_cursor_plane_atomic_update(vc4_crtc->cursor, -+ vc4_crtc->cursor->state); -+ } - } - - static int vc4_crtc_atomic_check(struct drm_crtc *crtc, -@@ -618,6 +649,9 @@ static int vc4_fkms_bind(struct device * - primary_plane->crtc = crtc; - cursor_plane->crtc = crtc; - -+ vc4_crtc->primary = primary_plane; -+ vc4_crtc->cursor = cursor_plane; -+ - vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); - if (!vc4_encoder) - return -ENOMEM; diff --git a/target/linux/brcm2708/patches-4.19/950-0115-drm-vc4-Fix-warning-about-vblank-interrupts-before-D.patch b/target/linux/brcm2708/patches-4.19/950-0115-drm-vc4-Fix-warning-about-vblank-interrupts-before-D.patch new file mode 100644 index 0000000000..43b200db16 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0115-drm-vc4-Fix-warning-about-vblank-interrupts-before-D.patch @@ -0,0 +1,50 @@ +From 36e1081459121883f9881a579c809c7b87895146 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 5 Feb 2018 18:01:02 +0000 +Subject: [PATCH] drm/vc4: Fix warning about vblank interrupts before + DRM core is ready. + +The SMICS interrupt fires continuously, but since it's 1/100 the rate +of the USB interrupts, we don't really need a way to turn it off. We +do need to make sure that we don't tell DRM about it until DRM has +asked for the interrupt at least once, because otherwise it will throw +a warning at boot time. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 10 ++++++---- + 1 file changed, 6 insertions(+), 4 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -43,6 +43,7 @@ struct vc4_crtc { + + struct drm_pending_vblank_event *event; + u32 overscan[4]; ++ bool vblank_enabled; + }; + + static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) +@@ -420,7 +421,8 @@ static irqreturn_t vc4_crtc_irq_handler( + + if (stat & SMICS_INTERRUPTS) { + writel(0, vc4_crtc->regs + SMICS); +- drm_crtc_handle_vblank(&vc4_crtc->base); ++ if (vc4_crtc->vblank_enabled) ++ drm_crtc_handle_vblank(&vc4_crtc->base); + vc4_crtc_handle_page_flip(vc4_crtc); + ret = IRQ_HANDLED; + } +@@ -443,9 +445,9 @@ static int vc4_page_flip(struct drm_crtc + + static int vc4_fkms_enable_vblank(struct drm_crtc *crtc) + { +- /* XXX: Need a way to enable/disable the interrupt, to avoid +- * DRM warnings at boot time. +- */ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ ++ vc4_crtc->vblank_enabled = true; + + return 0; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0116-drm-vc4-Add-FB-modifier-support-to-firmwarekms.patch b/target/linux/brcm2708/patches-4.19/950-0116-drm-vc4-Add-FB-modifier-support-to-firmwarekms.patch deleted file mode 100644 index af931a64d5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0116-drm-vc4-Add-FB-modifier-support-to-firmwarekms.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 94db315153c83753aded66cf3ea1de2b95d37628 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 7 Jun 2017 14:39:49 -0700 -Subject: [PATCH 116/806] drm/vc4: Add FB modifier support to firmwarekms. - -Signed-off-by: Eric Anholt -(cherry picked from commit 11752d73488e08aaeb65fe8289a9c016acde26c2) ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -17,6 +17,7 @@ - #include "drm/drm_atomic_helper.h" - #include "drm/drm_plane_helper.h" - #include "drm/drm_crtc_helper.h" -+#include "drm/drm_fourcc.h" - #include "linux/clk.h" - #include "linux/debugfs.h" - #include "drm/drm_fb_cma_helper.h" -@@ -134,6 +135,10 @@ static void vc4_primary_plane_atomic_upd - fbinfo->yoffset = state->crtc_y; - fbinfo->base = bo->paddr + fb->offsets[0]; - fbinfo->pitch = fb->pitches[0]; -+ -+ if (fb->modifier == DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED) -+ fbinfo->bpp |= BIT(31); -+ - /* A bug in the firmware makes it so that if the fb->base is - * set to nonzero, the configured pitch gets overwritten with - * the previous pitch. So, to get the configured pitch diff --git a/target/linux/brcm2708/patches-4.19/950-0116-drm-vc4-Skip-SET_CURSOR_INFO-when-the-cursor-content.patch b/target/linux/brcm2708/patches-4.19/950-0116-drm-vc4-Skip-SET_CURSOR_INFO-when-the-cursor-content.patch new file mode 100644 index 0000000000..0b9398fda7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0116-drm-vc4-Skip-SET_CURSOR_INFO-when-the-cursor-content.patch @@ -0,0 +1,57 @@ +From a87af130d6feadfea3146a78c58408a8be9a0635 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 5 Feb 2018 18:02:30 +0000 +Subject: [PATCH] drm/vc4: Skip SET_CURSOR_INFO when the cursor + contents didn't change. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 30 +++++++++++++++++--------- + 1 file changed, 20 insertions(+), 10 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -204,10 +204,6 @@ static void vc4_cursor_plane_atomic_upda + state->crtc_y, + 0 + }; +- u32 packet_info[] = { state->crtc_w, state->crtc_h, +- 0, /* unused */ +- bo->paddr + fb->offsets[0], +- 0, 0, /* hotx, hoty */}; + WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); + + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%08x/%d)", +@@ -232,12 +228,26 @@ static void vc4_cursor_plane_atomic_upda + if (ret || packet_state[0] != 0) + DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); + +- ret = rpi_firmware_property(vc4->firmware, +- RPI_FIRMWARE_SET_CURSOR_INFO, +- &packet_info, +- sizeof(packet_info)); +- if (ret || packet_info[0] != 0) +- DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); ++ /* Note: When the cursor contents change, the modesetting ++ * driver calls drm_mode_cursor_univeral() with ++ * DRM_MODE_CURSOR_BO, which means a new fb will be allocated. ++ */ ++ if (!old_state || ++ state->crtc_w != old_state->crtc_w || ++ state->crtc_h != old_state->crtc_h || ++ fb != old_state->fb) { ++ u32 packet_info[] = { state->crtc_w, state->crtc_h, ++ 0, /* unused */ ++ bo->paddr + fb->offsets[0], ++ 0, 0, /* hotx, hoty */}; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_INFO, ++ &packet_info, ++ sizeof(packet_info)); ++ if (ret || packet_info[0] != 0) ++ DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); ++ } + } + + static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, diff --git a/target/linux/brcm2708/patches-4.19/950-0117-drm-vc4-Add-missing-enable-disable-vblank-handlers-i.patch b/target/linux/brcm2708/patches-4.19/950-0117-drm-vc4-Add-missing-enable-disable-vblank-handlers-i.patch deleted file mode 100644 index 9bc4a24416..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0117-drm-vc4-Add-missing-enable-disable-vblank-handlers-i.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 10d8194f8415a69d3ea049450e86e14572591a71 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Tue, 30 Jan 2018 14:21:02 -0800 -Subject: [PATCH 117/806] drm/vc4: Add missing enable/disable vblank handlers - in fkms. - -Fixes hang at boot in 4.14. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_crtc.c | 14 -------------- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +++++++++++++++ - 2 files changed, 15 insertions(+), 14 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -764,15 +764,8 @@ static void vc4_crtc_atomic_flush(struct - - static int vc4_enable_vblank(struct drm_crtc *crtc) - { -- struct drm_device *dev = crtc->dev; -- struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); - -- if (vc4->firmware_kms) { -- /* XXX: Can we mask the SMI interrupt? */ -- return 0; -- } -- - CRTC_WRITE(PV_INTEN, PV_INT_VFP_START); - - return 0; -@@ -780,15 +773,8 @@ static int vc4_enable_vblank(struct drm_ - - static void vc4_disable_vblank(struct drm_crtc *crtc) - { -- struct drm_device *dev = crtc->dev; -- struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); - -- if (vc4->firmware_kms) { -- /* XXX: Can we mask the SMI interrupt? */ -- return; -- } -- - CRTC_WRITE(PV_INTEN, 0); - } - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -433,6 +433,19 @@ static int vc4_page_flip(struct drm_crtc - return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx); - } - -+static int vc4_fkms_enable_vblank(struct drm_crtc *crtc) -+{ -+ /* XXX: Need a way to enable/disable the interrupt, to avoid -+ * DRM warnings at boot time. -+ */ -+ -+ return 0; -+} -+ -+static void vc4_fkms_disable_vblank(struct drm_crtc *crtc) -+{ -+} -+ - static const struct drm_crtc_funcs vc4_crtc_funcs = { - .set_config = drm_atomic_helper_set_config, - .destroy = drm_crtc_cleanup, -@@ -443,6 +456,8 @@ static const struct drm_crtc_funcs vc4_c - .reset = drm_atomic_helper_crtc_reset, - .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, -+ .enable_vblank = vc4_fkms_enable_vblank, -+ .disable_vblank = vc4_fkms_disable_vblank, - }; - - static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { diff --git a/target/linux/brcm2708/patches-4.19/950-0117-drm-vc4-Remove-duplicate-primary-cursor-fields-from-.patch b/target/linux/brcm2708/patches-4.19/950-0117-drm-vc4-Remove-duplicate-primary-cursor-fields-from-.patch new file mode 100644 index 0000000000..cf3b876537 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0117-drm-vc4-Remove-duplicate-primary-cursor-fields-from-.patch @@ -0,0 +1,71 @@ +From 9326eeda8a0ec622c94b063fe2aaee642a932cfa Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 5 Feb 2018 18:22:03 +0000 +Subject: [PATCH] drm/vc4: Remove duplicate primary/cursor fields from + FKMS driver. + +The CRTC has those fields and we can just use them. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 24 +++++++----------------- + 1 file changed, 7 insertions(+), 17 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -37,8 +37,6 @@ struct vc4_crtc { + struct drm_crtc base; + struct drm_encoder *encoder; + struct drm_connector *connector; +- struct drm_plane *primary; +- struct drm_plane *cursor; + void __iomem *regs; + + struct drm_pending_vblank_event *event; +@@ -356,29 +354,24 @@ static void vc4_crtc_mode_set_nofb(struc + + static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { +- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); +- + /* Always turn the planes off on CRTC disable. In DRM, planes + * are enabled/disabled through the update/disable hooks + * above, and the CRTC enable/disable independently controls + * whether anything scans out at all, but the firmware doesn't + * give us a CRTC-level control for that. + */ +- vc4_cursor_plane_atomic_disable(vc4_crtc->cursor, +- vc4_crtc->cursor->state); +- vc4_plane_set_primary_blank(vc4_crtc->primary, true); ++ vc4_cursor_plane_atomic_disable(crtc->cursor, crtc->cursor->state); ++ vc4_plane_set_primary_blank(crtc->primary, true); + } + + static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { +- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); +- + /* Unblank the planes (if they're supposed to be displayed). */ +- if (vc4_crtc->primary->state->fb) +- vc4_plane_set_primary_blank(vc4_crtc->primary, false); +- if (vc4_crtc->cursor->state->fb) { +- vc4_cursor_plane_atomic_update(vc4_crtc->cursor, +- vc4_crtc->cursor->state); ++ if (crtc->primary->state->fb) ++ vc4_plane_set_primary_blank(crtc->primary, false); ++ if (crtc->cursor->state->fb) { ++ vc4_cursor_plane_atomic_update(crtc->cursor, ++ crtc->cursor->state); + } + } + +@@ -689,9 +682,6 @@ static int vc4_fkms_bind(struct device * + primary_plane->crtc = crtc; + cursor_plane->crtc = crtc; + +- vc4_crtc->primary = primary_plane; +- vc4_crtc->cursor = cursor_plane; +- + vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); + if (!vc4_encoder) + return -ENOMEM; diff --git a/target/linux/brcm2708/patches-4.19/950-0118-vc4_firmware_kms-fix-build.patch b/target/linux/brcm2708/patches-4.19/950-0118-vc4_firmware_kms-fix-build.patch new file mode 100644 index 0000000000..65fc0978a8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0118-vc4_firmware_kms-fix-build.patch @@ -0,0 +1,38 @@ +From 8b9843afd665a52df07cc804d6fcb624b22cd85e Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Sun, 17 Jun 2018 13:22:07 +0100 +Subject: [PATCH] vc4_firmware_kms: fix build + +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -33,6 +33,8 @@ + #define SMICS 0x0 + #define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) + ++#define vc4_crtc vc4_kms_crtc ++#define to_vc4_crtc to_vc4_kms_crtc + struct vc4_crtc { + struct drm_crtc base; + struct drm_encoder *encoder; +@@ -273,7 +275,7 @@ static int vc4_plane_atomic_check(struct + + static void vc4_plane_destroy(struct drm_plane *plane) + { +- drm_plane_helper_disable(plane); ++ drm_plane_helper_disable(plane, NULL); + drm_plane_cleanup(plane); + } + +@@ -591,7 +593,7 @@ static struct drm_connector *vc4_fkms_co + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + +- drm_mode_connector_attach_encoder(connector, encoder); ++ drm_connector_attach_encoder(connector, encoder); + + return connector; + diff --git a/target/linux/brcm2708/patches-4.19/950-0118-vc4_fkms-Apply-firmware-overscan-offset-to-hardware-.patch b/target/linux/brcm2708/patches-4.19/950-0118-vc4_fkms-Apply-firmware-overscan-offset-to-hardware-.patch deleted file mode 100644 index 8594c6c9c7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0118-vc4_fkms-Apply-firmware-overscan-offset-to-hardware-.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 5ef3d566615961b75f85868b028193bb54727140 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 18 Apr 2017 21:43:46 +0100 -Subject: [PATCH 118/806] vc4_fkms: Apply firmware overscan offset to hardware - cursor - ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -42,6 +42,7 @@ struct vc4_crtc { - void __iomem *regs; - - struct drm_pending_vblank_event *event; -+ u32 overscan[4]; - }; - - static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) -@@ -191,6 +192,7 @@ static void vc4_cursor_plane_atomic_upda - struct drm_plane_state *old_state) - { - struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(plane->crtc); - struct drm_plane_state *state = plane->state; - struct drm_framebuffer *fb = state->fb; - struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -@@ -216,6 +218,12 @@ static void vc4_cursor_plane_atomic_upda - bo->paddr + fb->offsets[0], - fb->pitches[0]); - -+ /* add on the top/left offsets when overscan is active */ -+ if (vc4_crtc) { -+ packet_state[1] += vc4_crtc->overscan[0]; -+ packet_state[2] += vc4_crtc->overscan[1]; -+ } -+ - ret = rpi_firmware_property(vc4->firmware, - RPI_FIRMWARE_SET_CURSOR_STATE, - &packet_state, -@@ -695,6 +703,15 @@ static int vc4_fkms_bind(struct device * - if (ret) - goto err_destroy_connector; - -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN, -+ &vc4_crtc->overscan, -+ sizeof(vc4_crtc->overscan)); -+ if (ret) { -+ DRM_ERROR("Failed to get overscan state: 0x%08x\n", vc4_crtc->overscan[0]); -+ memset(&vc4_crtc->overscan, 0, sizeof(vc4_crtc->overscan)); -+ } -+ - platform_set_drvdata(pdev, vc4_crtc); - - return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0119-drm-vc4-Fix-warning-about-vblank-interrupts-before-D.patch b/target/linux/brcm2708/patches-4.19/950-0119-drm-vc4-Fix-warning-about-vblank-interrupts-before-D.patch deleted file mode 100644 index fcfbccc4ce..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0119-drm-vc4-Fix-warning-about-vblank-interrupts-before-D.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 36e1081459121883f9881a579c809c7b87895146 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 5 Feb 2018 18:01:02 +0000 -Subject: [PATCH 119/806] drm/vc4: Fix warning about vblank interrupts before - DRM core is ready. - -The SMICS interrupt fires continuously, but since it's 1/100 the rate -of the USB interrupts, we don't really need a way to turn it off. We -do need to make sure that we don't tell DRM about it until DRM has -asked for the interrupt at least once, because otherwise it will throw -a warning at boot time. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 10 ++++++---- - 1 file changed, 6 insertions(+), 4 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -43,6 +43,7 @@ struct vc4_crtc { - - struct drm_pending_vblank_event *event; - u32 overscan[4]; -+ bool vblank_enabled; - }; - - static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) -@@ -420,7 +421,8 @@ static irqreturn_t vc4_crtc_irq_handler( - - if (stat & SMICS_INTERRUPTS) { - writel(0, vc4_crtc->regs + SMICS); -- drm_crtc_handle_vblank(&vc4_crtc->base); -+ if (vc4_crtc->vblank_enabled) -+ drm_crtc_handle_vblank(&vc4_crtc->base); - vc4_crtc_handle_page_flip(vc4_crtc); - ret = IRQ_HANDLED; - } -@@ -443,9 +445,9 @@ static int vc4_page_flip(struct drm_crtc - - static int vc4_fkms_enable_vblank(struct drm_crtc *crtc) - { -- /* XXX: Need a way to enable/disable the interrupt, to avoid -- * DRM warnings at boot time. -- */ -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ -+ vc4_crtc->vblank_enabled = true; - - return 0; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0119-hack-cache-Fix-linker-error.patch b/target/linux/brcm2708/patches-4.19/950-0119-hack-cache-Fix-linker-error.patch new file mode 100644 index 0000000000..ed4e65f11c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0119-hack-cache-Fix-linker-error.patch @@ -0,0 +1,27 @@ +From 7e26ec509af7279406042ecb776f173c487ffddc Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 20 Feb 2018 20:53:46 +0000 +Subject: [PATCH] hack: cache: Fix linker error + +--- + arch/arm/mm/cache-v7.S | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm/mm/cache-v7.S ++++ b/arch/arm/mm/cache-v7.S +@@ -350,6 +350,7 @@ ENDPROC(v7_flush_kern_dcache_area) + * - start - virtual start address of region + * - end - virtual end address of region + */ ++ENTRY(b15_dma_inv_range) + ENTRY(v7_dma_inv_range) + dcache_line_size r2, r3 + sub r3, r2, #1 +@@ -380,6 +381,7 @@ ENDPROC(v7_dma_inv_range) + * - start - virtual start address of region + * - end - virtual end address of region + */ ++ENTRY(b15_dma_clean_range) + ENTRY(v7_dma_clean_range) + dcache_line_size r2, r3 + sub r3, r2, #1 diff --git a/target/linux/brcm2708/patches-4.19/950-0120-drm-vc4-Skip-SET_CURSOR_INFO-when-the-cursor-content.patch b/target/linux/brcm2708/patches-4.19/950-0120-drm-vc4-Skip-SET_CURSOR_INFO-when-the-cursor-content.patch deleted file mode 100644 index 6810169603..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0120-drm-vc4-Skip-SET_CURSOR_INFO-when-the-cursor-content.patch +++ /dev/null @@ -1,57 +0,0 @@ -From a87af130d6feadfea3146a78c58408a8be9a0635 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 5 Feb 2018 18:02:30 +0000 -Subject: [PATCH 120/806] drm/vc4: Skip SET_CURSOR_INFO when the cursor - contents didn't change. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 30 +++++++++++++++++--------- - 1 file changed, 20 insertions(+), 10 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -204,10 +204,6 @@ static void vc4_cursor_plane_atomic_upda - state->crtc_y, - 0 - }; -- u32 packet_info[] = { state->crtc_w, state->crtc_h, -- 0, /* unused */ -- bo->paddr + fb->offsets[0], -- 0, 0, /* hotx, hoty */}; - WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); - - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%08x/%d)", -@@ -232,12 +228,26 @@ static void vc4_cursor_plane_atomic_upda - if (ret || packet_state[0] != 0) - DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); - -- ret = rpi_firmware_property(vc4->firmware, -- RPI_FIRMWARE_SET_CURSOR_INFO, -- &packet_info, -- sizeof(packet_info)); -- if (ret || packet_info[0] != 0) -- DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); -+ /* Note: When the cursor contents change, the modesetting -+ * driver calls drm_mode_cursor_univeral() with -+ * DRM_MODE_CURSOR_BO, which means a new fb will be allocated. -+ */ -+ if (!old_state || -+ state->crtc_w != old_state->crtc_w || -+ state->crtc_h != old_state->crtc_h || -+ fb != old_state->fb) { -+ u32 packet_info[] = { state->crtc_w, state->crtc_h, -+ 0, /* unused */ -+ bo->paddr + fb->offsets[0], -+ 0, 0, /* hotx, hoty */}; -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_SET_CURSOR_INFO, -+ &packet_info, -+ sizeof(packet_info)); -+ if (ret || packet_info[0] != 0) -+ DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); -+ } - } - - static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, diff --git a/target/linux/brcm2708/patches-4.19/950-0120-i2c-gpio-Also-set-bus-numbers-from-reg-property.patch b/target/linux/brcm2708/patches-4.19/950-0120-i2c-gpio-Also-set-bus-numbers-from-reg-property.patch new file mode 100644 index 0000000000..6103e82d88 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0120-i2c-gpio-Also-set-bus-numbers-from-reg-property.patch @@ -0,0 +1,35 @@ +From b7e22249959b8111e3d8fe7a78afa6a7b0420350 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 20 Feb 2018 10:07:27 +0000 +Subject: [PATCH] i2c-gpio: Also set bus numbers from reg property + +I2C busses can be assigned specific bus numbers using aliases in +Device Tree - string properties where the name is the alias and the +value is the path to the node. The current DT parameter mechanism +does not allow property names to be derived from a parameter value +in any way, so it isn't possible to generate unique or matching +aliases for nodes from an overlay that can generate multiple +instances, e.g. i2c-gpio. + +Work around this limitation (at least temporarily) by allowing +the i2c adapter number to be initialised from the "reg" property +if present. + +Signed-off-by: Phil Elwell +--- + drivers/i2c/busses/i2c-gpio.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/i2c/busses/i2c-gpio.c ++++ b/drivers/i2c/busses/i2c-gpio.c +@@ -350,7 +350,9 @@ static int i2c_gpio_probe(struct platfor + adap->dev.parent = dev; + adap->dev.of_node = np; + +- adap->nr = pdev->id; ++ if (pdev->id != PLATFORM_DEVID_NONE || !pdev->dev.of_node || ++ of_property_read_u32(pdev->dev.of_node, "reg", &adap->nr)) ++ adap->nr = pdev->id; + ret = i2c_bit_add_numbered_bus(adap); + if (ret) + return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0121-drm-vc4-Remove-duplicate-primary-cursor-fields-from-.patch b/target/linux/brcm2708/patches-4.19/950-0121-drm-vc4-Remove-duplicate-primary-cursor-fields-from-.patch deleted file mode 100644 index c6e5abde8e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0121-drm-vc4-Remove-duplicate-primary-cursor-fields-from-.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 9326eeda8a0ec622c94b063fe2aaee642a932cfa Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 5 Feb 2018 18:22:03 +0000 -Subject: [PATCH 121/806] drm/vc4: Remove duplicate primary/cursor fields from - FKMS driver. - -The CRTC has those fields and we can just use them. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 24 +++++++----------------- - 1 file changed, 7 insertions(+), 17 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -37,8 +37,6 @@ struct vc4_crtc { - struct drm_crtc base; - struct drm_encoder *encoder; - struct drm_connector *connector; -- struct drm_plane *primary; -- struct drm_plane *cursor; - void __iomem *regs; - - struct drm_pending_vblank_event *event; -@@ -356,29 +354,24 @@ static void vc4_crtc_mode_set_nofb(struc - - static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { -- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -- - /* Always turn the planes off on CRTC disable. In DRM, planes - * are enabled/disabled through the update/disable hooks - * above, and the CRTC enable/disable independently controls - * whether anything scans out at all, but the firmware doesn't - * give us a CRTC-level control for that. - */ -- vc4_cursor_plane_atomic_disable(vc4_crtc->cursor, -- vc4_crtc->cursor->state); -- vc4_plane_set_primary_blank(vc4_crtc->primary, true); -+ vc4_cursor_plane_atomic_disable(crtc->cursor, crtc->cursor->state); -+ vc4_plane_set_primary_blank(crtc->primary, true); - } - - static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { -- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -- - /* Unblank the planes (if they're supposed to be displayed). */ -- if (vc4_crtc->primary->state->fb) -- vc4_plane_set_primary_blank(vc4_crtc->primary, false); -- if (vc4_crtc->cursor->state->fb) { -- vc4_cursor_plane_atomic_update(vc4_crtc->cursor, -- vc4_crtc->cursor->state); -+ if (crtc->primary->state->fb) -+ vc4_plane_set_primary_blank(crtc->primary, false); -+ if (crtc->cursor->state->fb) { -+ vc4_cursor_plane_atomic_update(crtc->cursor, -+ crtc->cursor->state); - } - } - -@@ -689,9 +682,6 @@ static int vc4_fkms_bind(struct device * - primary_plane->crtc = crtc; - cursor_plane->crtc = crtc; - -- vc4_crtc->primary = primary_plane; -- vc4_crtc->cursor = cursor_plane; -- - vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); - if (!vc4_encoder) - return -ENOMEM; diff --git a/target/linux/brcm2708/patches-4.19/950-0121-sound-bcm-Fix-memset-dereference-warning.patch b/target/linux/brcm2708/patches-4.19/950-0121-sound-bcm-Fix-memset-dereference-warning.patch new file mode 100644 index 0000000000..9c5e9138a5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0121-sound-bcm-Fix-memset-dereference-warning.patch @@ -0,0 +1,36 @@ +From b6258886ad6bd69b3d51b9c79ea6ada0e01b2db9 Mon Sep 17 00:00:00 2001 +From: Nathan Chancellor +Date: Sun, 4 Mar 2018 17:20:25 -0700 +Subject: [PATCH] sound: bcm: Fix memset dereference warning +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This warning appears with GCC 6.4.0 from toolchains.bootlin.com: + +../sound/soc/bcm/allo-piano-dac-plus.c: In function ‘snd_allo_piano_dac_init’: +../sound/soc/bcm/allo-piano-dac-plus.c:711:30: warning: argument to ‘sizeof’ in ‘memset’ call is the same expression as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess] + memset(glb_ptr, 0x00, sizeof(glb_ptr)); + ^ + +Suggested-by: Phil Elwell +Signed-off-by: Nathan Chancellor +--- + sound/soc/bcm/allo-piano-dac-plus.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/sound/soc/bcm/allo-piano-dac-plus.c ++++ b/sound/soc/bcm/allo-piano-dac-plus.c +@@ -706,11 +706,10 @@ static int snd_allo_piano_dac_init(struc + struct snd_soc_card *card = rtd->card; + struct glb_pool *glb_ptr; + +- glb_ptr = kmalloc(sizeof(struct glb_pool), GFP_KERNEL); ++ glb_ptr = kzalloc(sizeof(struct glb_pool), GFP_KERNEL); + if (!glb_ptr) + return -ENOMEM; + +- memset(glb_ptr, 0x00, sizeof(glb_ptr)); + card->drvdata = glb_ptr; + glb_ptr->dual_mode = 2; + glb_ptr->set_mode = 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0122-added-capture_clear-option-to-pps-gpio-via-dtoverlay.patch b/target/linux/brcm2708/patches-4.19/950-0122-added-capture_clear-option-to-pps-gpio-via-dtoverlay.patch new file mode 100644 index 0000000000..1b734b56ac --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0122-added-capture_clear-option-to-pps-gpio-via-dtoverlay.patch @@ -0,0 +1,22 @@ +From 8e3577ac67382beda74437cb6f6bff5dbdb83fc9 Mon Sep 17 00:00:00 2001 +From: hdoverobinson +Date: Tue, 13 Mar 2018 06:58:39 -0400 +Subject: [PATCH] added capture_clear option to pps-gpio via dtoverlay + (#2433) + +--- + drivers/pps/clients/pps-gpio.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/pps/clients/pps-gpio.c ++++ b/drivers/pps/clients/pps-gpio.c +@@ -119,6 +119,9 @@ static int pps_gpio_probe(struct platfor + + if (of_get_property(np, "assert-falling-edge", NULL)) + data->assert_falling_edge = true; ++ ++ if (of_get_property(np, "capture-clear", NULL)) ++ data->capture_clear = true; + } + + /* GPIO setup */ diff --git a/target/linux/brcm2708/patches-4.19/950-0122-vc4_firmware_kms-fix-build.patch b/target/linux/brcm2708/patches-4.19/950-0122-vc4_firmware_kms-fix-build.patch deleted file mode 100644 index 43dc0c2d35..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0122-vc4_firmware_kms-fix-build.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 8b9843afd665a52df07cc804d6fcb624b22cd85e Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Sun, 17 Jun 2018 13:22:07 +0100 -Subject: [PATCH 122/806] vc4_firmware_kms: fix build - ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -33,6 +33,8 @@ - #define SMICS 0x0 - #define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) - -+#define vc4_crtc vc4_kms_crtc -+#define to_vc4_crtc to_vc4_kms_crtc - struct vc4_crtc { - struct drm_crtc base; - struct drm_encoder *encoder; -@@ -273,7 +275,7 @@ static int vc4_plane_atomic_check(struct - - static void vc4_plane_destroy(struct drm_plane *plane) - { -- drm_plane_helper_disable(plane); -+ drm_plane_helper_disable(plane, NULL); - drm_plane_cleanup(plane); - } - -@@ -591,7 +593,7 @@ static struct drm_connector *vc4_fkms_co - connector->interlace_allowed = 0; - connector->doublescan_allowed = 0; - -- drm_mode_connector_attach_encoder(connector, encoder); -+ drm_connector_attach_encoder(connector, encoder); - - return connector; - diff --git a/target/linux/brcm2708/patches-4.19/950-0123-hack-cache-Fix-linker-error.patch b/target/linux/brcm2708/patches-4.19/950-0123-hack-cache-Fix-linker-error.patch deleted file mode 100644 index bd9c838ef1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0123-hack-cache-Fix-linker-error.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 7e26ec509af7279406042ecb776f173c487ffddc Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 20 Feb 2018 20:53:46 +0000 -Subject: [PATCH 123/806] hack: cache: Fix linker error - ---- - arch/arm/mm/cache-v7.S | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/mm/cache-v7.S -+++ b/arch/arm/mm/cache-v7.S -@@ -350,6 +350,7 @@ ENDPROC(v7_flush_kern_dcache_area) - * - start - virtual start address of region - * - end - virtual end address of region - */ -+ENTRY(b15_dma_inv_range) - ENTRY(v7_dma_inv_range) - dcache_line_size r2, r3 - sub r3, r2, #1 -@@ -380,6 +381,7 @@ ENDPROC(v7_dma_inv_range) - * - start - virtual start address of region - * - end - virtual end address of region - */ -+ENTRY(b15_dma_clean_range) - ENTRY(v7_dma_clean_range) - dcache_line_size r2, r3 - sub r3, r2, #1 diff --git a/target/linux/brcm2708/patches-4.19/950-0123-lan78xx-Read-initial-EEE-status-from-DT.patch b/target/linux/brcm2708/patches-4.19/950-0123-lan78xx-Read-initial-EEE-status-from-DT.patch new file mode 100644 index 0000000000..a1a9fa6c88 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0123-lan78xx-Read-initial-EEE-status-from-DT.patch @@ -0,0 +1,40 @@ +From 26c3806ff17c6a7ed61ba127af36271390e86c89 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 9 Mar 2018 12:01:00 +0000 +Subject: [PATCH] lan78xx: Read initial EEE status from DT + +Add two new DT properties: +* microchip,eee-enabled - a boolean to enable EEE +* microchip,tx-lpi-timer - time in microseconds to wait before entering + low power state + +Signed-off-by: Phil Elwell +--- + drivers/net/usb/lan78xx.c | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/drivers/net/usb/lan78xx.c ++++ b/drivers/net/usb/lan78xx.c +@@ -2657,6 +2657,22 @@ static int lan78xx_open(struct net_devic + + netif_dbg(dev, ifup, dev->net, "phy initialised successfully"); + ++ if (of_property_read_bool(dev->udev->dev.of_node, ++ "microchip,eee-enabled")) { ++ struct ethtool_eee edata; ++ memset(&edata, 0, sizeof(edata)); ++ edata.cmd = ETHTOOL_SEEE; ++ edata.advertised = ADVERTISED_1000baseT_Full | ++ ADVERTISED_100baseT_Full; ++ edata.eee_enabled = true; ++ edata.tx_lpi_enabled = true; ++ if (of_property_read_u32(dev->udev->dev.of_node, ++ "microchip,tx-lpi-timer", ++ &edata.tx_lpi_timer)) ++ edata.tx_lpi_timer = 600; /* non-aggressive */ ++ (void)lan78xx_set_eee(net, &edata); ++ } ++ + /* for Link Check */ + if (dev->urb_intr) { + ret = usb_submit_urb(dev->urb_intr, GFP_KERNEL); diff --git a/target/linux/brcm2708/patches-4.19/950-0124-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch b/target/linux/brcm2708/patches-4.19/950-0124-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch new file mode 100644 index 0000000000..4851e066ac --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0124-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch @@ -0,0 +1,32 @@ +From 119f98cc4c860085809584b7504ca61bac70586e Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 14 Jul 2014 22:02:09 +0100 +Subject: [PATCH] hid: Reduce default mouse polling interval to 60Hz + +Reduces overhead when using X +--- + drivers/hid/usbhid/hid-core.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/drivers/hid/usbhid/hid-core.c ++++ b/drivers/hid/usbhid/hid-core.c +@@ -48,7 +48,7 @@ + * Module parameters. + */ + +-static unsigned int hid_mousepoll_interval; ++static unsigned int hid_mousepoll_interval = ~0; + module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644); + MODULE_PARM_DESC(mousepoll, "Polling interval of mice"); + +@@ -1104,7 +1104,9 @@ static int usbhid_start(struct hid_devic + */ + switch (hid->collection->usage) { + case HID_GD_MOUSE: +- if (hid_mousepoll_interval > 0) ++ if (hid_mousepoll_interval == ~0 && interval < 16) ++ interval = 16; ++ else if (hid_mousepoll_interval != ~0 && hid_mousepoll_interval != 0) + interval = hid_mousepoll_interval; + break; + case HID_GD_JOYSTICK: diff --git a/target/linux/brcm2708/patches-4.19/950-0124-i2c-gpio-Also-set-bus-numbers-from-reg-property.patch b/target/linux/brcm2708/patches-4.19/950-0124-i2c-gpio-Also-set-bus-numbers-from-reg-property.patch deleted file mode 100644 index 873f0d9bda..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0124-i2c-gpio-Also-set-bus-numbers-from-reg-property.patch +++ /dev/null @@ -1,35 +0,0 @@ -From b7e22249959b8111e3d8fe7a78afa6a7b0420350 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 20 Feb 2018 10:07:27 +0000 -Subject: [PATCH 124/806] i2c-gpio: Also set bus numbers from reg property - -I2C busses can be assigned specific bus numbers using aliases in -Device Tree - string properties where the name is the alias and the -value is the path to the node. The current DT parameter mechanism -does not allow property names to be derived from a parameter value -in any way, so it isn't possible to generate unique or matching -aliases for nodes from an overlay that can generate multiple -instances, e.g. i2c-gpio. - -Work around this limitation (at least temporarily) by allowing -the i2c adapter number to be initialised from the "reg" property -if present. - -Signed-off-by: Phil Elwell ---- - drivers/i2c/busses/i2c-gpio.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/i2c/busses/i2c-gpio.c -+++ b/drivers/i2c/busses/i2c-gpio.c -@@ -350,7 +350,9 @@ static int i2c_gpio_probe(struct platfor - adap->dev.parent = dev; - adap->dev.of_node = np; - -- adap->nr = pdev->id; -+ if (pdev->id != PLATFORM_DEVID_NONE || !pdev->dev.of_node || -+ of_property_read_u32(pdev->dev.of_node, "reg", &adap->nr)) -+ adap->nr = pdev->id; - ret = i2c_bit_add_numbered_bus(adap); - if (ret) - return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0125-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch b/target/linux/brcm2708/patches-4.19/950-0125-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch new file mode 100644 index 0000000000..17867c330a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0125-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch @@ -0,0 +1,46 @@ +From 1929780cf2cc997f990085bd878112b28f4175c9 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 24 Apr 2018 14:42:27 +0100 +Subject: [PATCH] gpiolib: Don't prevent IRQ usage of output GPIOs + +Upstream Linux deems using output GPIOs to generate IRQs as a bogus +use case, even though the BCM2835 GPIO controller is capable of doing +so. A number of users would like to make use of this facility, so +disable the checks. + +See: https://github.com/raspberrypi/linux/issues/2527 + +Signed-off-by: Phil Elwell +--- + drivers/gpio/gpiolib.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/drivers/gpio/gpiolib.c ++++ b/drivers/gpio/gpiolib.c +@@ -53,6 +53,8 @@ + #define extra_checks 0 + #endif + ++#define dont_test_bit(b,d) (0) ++ + /* Device and char device-related information */ + static DEFINE_IDA(gpio_ida); + static dev_t gpio_devt; +@@ -2654,7 +2656,7 @@ int gpiod_direction_output(struct gpio_d + value = !!value; + + /* GPIOs used for IRQs shall not be set as output */ +- if (test_bit(FLAG_USED_AS_IRQ, &desc->flags)) { ++ if (dont_test_bit(FLAG_USED_AS_IRQ, &desc->flags)) { + gpiod_err(desc, + "%s: tried to set a GPIO tied to an IRQ as output\n", + __func__); +@@ -3353,7 +3355,7 @@ int gpiochip_lock_as_irq(struct gpio_chi + } + } + +- if (test_bit(FLAG_IS_OUT, &desc->flags)) { ++ if (dont_test_bit(FLAG_IS_OUT, &desc->flags)) { + chip_err(chip, + "%s: tried to flag a GPIO set as output for IRQ\n", + __func__); diff --git a/target/linux/brcm2708/patches-4.19/950-0125-sound-bcm-Fix-memset-dereference-warning.patch b/target/linux/brcm2708/patches-4.19/950-0125-sound-bcm-Fix-memset-dereference-warning.patch deleted file mode 100644 index d803335300..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0125-sound-bcm-Fix-memset-dereference-warning.patch +++ /dev/null @@ -1,36 +0,0 @@ -From b6258886ad6bd69b3d51b9c79ea6ada0e01b2db9 Mon Sep 17 00:00:00 2001 -From: Nathan Chancellor -Date: Sun, 4 Mar 2018 17:20:25 -0700 -Subject: [PATCH 125/806] sound: bcm: Fix memset dereference warning -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This warning appears with GCC 6.4.0 from toolchains.bootlin.com: - -../sound/soc/bcm/allo-piano-dac-plus.c: In function ‘snd_allo_piano_dac_init’: -../sound/soc/bcm/allo-piano-dac-plus.c:711:30: warning: argument to ‘sizeof’ in ‘memset’ call is the same expression as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess] - memset(glb_ptr, 0x00, sizeof(glb_ptr)); - ^ - -Suggested-by: Phil Elwell -Signed-off-by: Nathan Chancellor ---- - sound/soc/bcm/allo-piano-dac-plus.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/sound/soc/bcm/allo-piano-dac-plus.c -+++ b/sound/soc/bcm/allo-piano-dac-plus.c -@@ -706,11 +706,10 @@ static int snd_allo_piano_dac_init(struc - struct snd_soc_card *card = rtd->card; - struct glb_pool *glb_ptr; - -- glb_ptr = kmalloc(sizeof(struct glb_pool), GFP_KERNEL); -+ glb_ptr = kzalloc(sizeof(struct glb_pool), GFP_KERNEL); - if (!glb_ptr) - return -ENOMEM; - -- memset(glb_ptr, 0x00, sizeof(glb_ptr)); - card->drvdata = glb_ptr; - glb_ptr->dual_mode = 2; - glb_ptr->set_mode = 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0126-Add-ability-to-export-gpio-used-by-gpio-poweroff.patch b/target/linux/brcm2708/patches-4.19/950-0126-Add-ability-to-export-gpio-used-by-gpio-poweroff.patch new file mode 100644 index 0000000000..60e7294c05 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0126-Add-ability-to-export-gpio-used-by-gpio-poweroff.patch @@ -0,0 +1,57 @@ +From 3e060982d93902bcca8503df4e33d6cd1e41e21b Mon Sep 17 00:00:00 2001 +From: Nick Bulleid +Date: Thu, 10 May 2018 21:57:02 +0100 +Subject: [PATCH] Add ability to export gpio used by gpio-poweroff + +Signed-off-by: Nick Bulleid + +Added export feature to gpio-poweroff documentation + +Signed-off-by: Nick Bulleid +--- + .../devicetree/bindings/power/reset/gpio-poweroff.txt | 1 + + drivers/power/reset/gpio-poweroff.c | 9 +++++++++ + 2 files changed, 10 insertions(+) + +--- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt ++++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt +@@ -29,6 +29,7 @@ Optional properties: + inactive state. + - timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is + specified, 3000 ms is used. ++- export : Export the GPIO line to the sysfs system + + Examples: + +--- a/drivers/power/reset/gpio-poweroff.c ++++ b/drivers/power/reset/gpio-poweroff.c +@@ -52,6 +52,7 @@ static int gpio_poweroff_probe(struct pl + bool input = false; + enum gpiod_flags flags; + bool force = false; ++ bool export = false; + + /* If a pm_power_off function has already been added, leave it alone */ + force = of_property_read_bool(pdev->dev.of_node, "force"); +@@ -74,6 +75,12 @@ static int gpio_poweroff_probe(struct pl + if (IS_ERR(reset_gpio)) + return PTR_ERR(reset_gpio); + ++ export = of_property_read_bool(pdev->dev.of_node, "export"); ++ if (export) { ++ gpiod_export(reset_gpio, false); ++ gpiod_export_link(&pdev->dev, "poweroff-gpio", reset_gpio); ++ } ++ + pm_power_off = &gpio_poweroff_do_poweroff; + return 0; + } +@@ -83,6 +90,8 @@ static int gpio_poweroff_remove(struct p + if (pm_power_off == &gpio_poweroff_do_poweroff) + pm_power_off = NULL; + ++ gpiod_unexport(reset_gpio); ++ + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0126-added-capture_clear-option-to-pps-gpio-via-dtoverlay.patch b/target/linux/brcm2708/patches-4.19/950-0126-added-capture_clear-option-to-pps-gpio-via-dtoverlay.patch deleted file mode 100644 index 9a9df8276d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0126-added-capture_clear-option-to-pps-gpio-via-dtoverlay.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 8e3577ac67382beda74437cb6f6bff5dbdb83fc9 Mon Sep 17 00:00:00 2001 -From: hdoverobinson -Date: Tue, 13 Mar 2018 06:58:39 -0400 -Subject: [PATCH 126/806] added capture_clear option to pps-gpio via dtoverlay - (#2433) - ---- - drivers/pps/clients/pps-gpio.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/pps/clients/pps-gpio.c -+++ b/drivers/pps/clients/pps-gpio.c -@@ -119,6 +119,9 @@ static int pps_gpio_probe(struct platfor - - if (of_get_property(np, "assert-falling-edge", NULL)) - data->assert_falling_edge = true; -+ -+ if (of_get_property(np, "capture-clear", NULL)) -+ data->capture_clear = true; - } - - /* GPIO setup */ diff --git a/target/linux/brcm2708/patches-4.19/950-0127-firmware-raspberrypi-Notify-firmware-of-a-reboot.patch b/target/linux/brcm2708/patches-4.19/950-0127-firmware-raspberrypi-Notify-firmware-of-a-reboot.patch new file mode 100644 index 0000000000..8e06168f06 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0127-firmware-raspberrypi-Notify-firmware-of-a-reboot.patch @@ -0,0 +1,84 @@ +From 68aaa2f653c83f8fda6032153566b4f895dff524 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Sat, 12 May 2018 21:35:43 +0100 +Subject: [PATCH] firmware/raspberrypi: Notify firmware of a reboot + +Register for reboot notifications, sending RPI_FIRMWARE_NOTIFY_REBOOT +over the mailbox interface on reception. + +Signed-off-by: Phil Elwell +--- + drivers/firmware/raspberrypi.c | 40 +++++++++++++++++++++++++++++++++- + 1 file changed, 39 insertions(+), 1 deletion(-) + +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -175,6 +176,26 @@ int rpi_firmware_property(struct rpi_fir + } + EXPORT_SYMBOL_GPL(rpi_firmware_property); + ++static int rpi_firmware_notify_reboot(struct notifier_block *nb, ++ unsigned long action, ++ void *data) ++{ ++ struct rpi_firmware *fw; ++ struct platform_device *pdev = g_pdev; ++ ++ if (!pdev) ++ return 0; ++ ++ fw = platform_get_drvdata(pdev); ++ if (!fw) ++ return 0; ++ ++ (void)rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_REBOOT, ++ 0, 0); ++ ++ return 0; ++} ++ + static void + rpi_firmware_print_firmware_revision(struct rpi_firmware *fw) + { +@@ -285,15 +306,32 @@ static struct platform_driver rpi_firmwa + .remove = rpi_firmware_remove, + }; + ++static struct notifier_block rpi_firmware_reboot_notifier = { ++ .notifier_call = rpi_firmware_notify_reboot, ++}; ++ + static int __init rpi_firmware_init(void) + { +- return platform_driver_register(&rpi_firmware_driver); ++ int ret = register_reboot_notifier(&rpi_firmware_reboot_notifier); ++ if (ret) ++ goto out1; ++ ret = platform_driver_register(&rpi_firmware_driver); ++ if (ret) ++ goto out2; ++ ++ return 0; ++ ++out2: ++ unregister_reboot_notifier(&rpi_firmware_reboot_notifier); ++out1: ++ return ret; + } + subsys_initcall(rpi_firmware_init); + + static void __init rpi_firmware_exit(void) + { + platform_driver_unregister(&rpi_firmware_driver); ++ unregister_reboot_notifier(&rpi_firmware_reboot_notifier); + } + module_exit(rpi_firmware_exit); + diff --git a/target/linux/brcm2708/patches-4.19/950-0127-lan78xx-Read-initial-EEE-status-from-DT.patch b/target/linux/brcm2708/patches-4.19/950-0127-lan78xx-Read-initial-EEE-status-from-DT.patch deleted file mode 100644 index 2b9670e2c6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0127-lan78xx-Read-initial-EEE-status-from-DT.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 26c3806ff17c6a7ed61ba127af36271390e86c89 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 9 Mar 2018 12:01:00 +0000 -Subject: [PATCH 127/806] lan78xx: Read initial EEE status from DT - -Add two new DT properties: -* microchip,eee-enabled - a boolean to enable EEE -* microchip,tx-lpi-timer - time in microseconds to wait before entering - low power state - -Signed-off-by: Phil Elwell ---- - drivers/net/usb/lan78xx.c | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/drivers/net/usb/lan78xx.c -+++ b/drivers/net/usb/lan78xx.c -@@ -2657,6 +2657,22 @@ static int lan78xx_open(struct net_devic - - netif_dbg(dev, ifup, dev->net, "phy initialised successfully"); - -+ if (of_property_read_bool(dev->udev->dev.of_node, -+ "microchip,eee-enabled")) { -+ struct ethtool_eee edata; -+ memset(&edata, 0, sizeof(edata)); -+ edata.cmd = ETHTOOL_SEEE; -+ edata.advertised = ADVERTISED_1000baseT_Full | -+ ADVERTISED_100baseT_Full; -+ edata.eee_enabled = true; -+ edata.tx_lpi_enabled = true; -+ if (of_property_read_u32(dev->udev->dev.of_node, -+ "microchip,tx-lpi-timer", -+ &edata.tx_lpi_timer)) -+ edata.tx_lpi_timer = 600; /* non-aggressive */ -+ (void)lan78xx_set_eee(net, &edata); -+ } -+ - /* for Link Check */ - if (dev->urb_intr) { - ret = usb_submit_urb(dev->urb_intr, GFP_KERNEL); diff --git a/target/linux/brcm2708/patches-4.19/950-0128-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch b/target/linux/brcm2708/patches-4.19/950-0128-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch deleted file mode 100644 index 360657fa1d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0128-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 119f98cc4c860085809584b7504ca61bac70586e Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 14 Jul 2014 22:02:09 +0100 -Subject: [PATCH 128/806] hid: Reduce default mouse polling interval to 60Hz - -Reduces overhead when using X ---- - drivers/hid/usbhid/hid-core.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/hid/usbhid/hid-core.c -+++ b/drivers/hid/usbhid/hid-core.c -@@ -48,7 +48,7 @@ - * Module parameters. - */ - --static unsigned int hid_mousepoll_interval; -+static unsigned int hid_mousepoll_interval = ~0; - module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644); - MODULE_PARM_DESC(mousepoll, "Polling interval of mice"); - -@@ -1104,7 +1104,9 @@ static int usbhid_start(struct hid_devic - */ - switch (hid->collection->usage) { - case HID_GD_MOUSE: -- if (hid_mousepoll_interval > 0) -+ if (hid_mousepoll_interval == ~0 && interval < 16) -+ interval = 16; -+ else if (hid_mousepoll_interval != ~0 && hid_mousepoll_interval != 0) - interval = hid_mousepoll_interval; - break; - case HID_GD_JOYSTICK: diff --git a/target/linux/brcm2708/patches-4.19/950-0128-irqchip-irq-bcm2835-Calc.-FIQ_START-at-boot-time.patch b/target/linux/brcm2708/patches-4.19/950-0128-irqchip-irq-bcm2835-Calc.-FIQ_START-at-boot-time.patch new file mode 100644 index 0000000000..281f273e8d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0128-irqchip-irq-bcm2835-Calc.-FIQ_START-at-boot-time.patch @@ -0,0 +1,66 @@ +From 3166f055a568c4fe127b70b81a878ab59070a6f5 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 14 Jun 2018 11:21:04 +0100 +Subject: [PATCH] irqchip: irq-bcm2835: Calc. FIQ_START at boot-time + +ad83c7cb2f37 ("irqchip/irq-bcm2836: Add support for DT interrupt polarity") +changed the way that the BCM2836/7 local interrupts are mapped; instead +of being pre-mapped they are now mapped on-demand. A side effect of this +change is that the call to irq_of_parse_and_map from armctrl_of_init +creates a new mapping, forming a gap between the IRQs and the FIQs. This + gap breaks the FIQ<->IRQ mapping which up to now has been done by assuming: + +1) that the value of FIQ_START is the same as the number of normal IRQs +that will be mapped (still true), and + +2) that this value is also the offset between an IRQ and its equivalent +FIQ (which is no longer the case). + +Remove both assumptions by measuring the interval between the last IRQ +and the last FIQ, passing it as the parameter to init_FIQ(). + +Fixes: https://github.com/raspberrypi/linux/issues/2432 + +Signed-off-by: Phil Elwell +--- + drivers/irqchip/irq-bcm2835.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -82,8 +82,6 @@ + #define NR_BANKS 3 + #define IRQS_PER_BANK 32 + #define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0) +-#undef FIQ_START +-#define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0)) + + static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; + static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 }; +@@ -211,7 +209,7 @@ static int __init armctrl_of_init(struct + bool is_2836) + { + void __iomem *base; +- int irq, b, i; ++ int irq = 0, last_irq, b, i; + + base = of_iomap(node, 0); + if (!base) +@@ -237,6 +235,8 @@ static int __init armctrl_of_init(struct + } + } + ++ last_irq = irq; ++ + if (is_2836) { + int parent_irq = irq_of_parse_and_map(node, 0); + +@@ -267,7 +267,7 @@ static int __init armctrl_of_init(struct + } + } + #ifndef CONFIG_ARM64 +- init_FIQ(FIQ_START); ++ init_FIQ(irq - last_irq); + #endif + + return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0129-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch b/target/linux/brcm2708/patches-4.19/950-0129-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch deleted file mode 100644 index c28ce4081f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0129-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 1929780cf2cc997f990085bd878112b28f4175c9 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 24 Apr 2018 14:42:27 +0100 -Subject: [PATCH 129/806] gpiolib: Don't prevent IRQ usage of output GPIOs - -Upstream Linux deems using output GPIOs to generate IRQs as a bogus -use case, even though the BCM2835 GPIO controller is capable of doing -so. A number of users would like to make use of this facility, so -disable the checks. - -See: https://github.com/raspberrypi/linux/issues/2527 - -Signed-off-by: Phil Elwell ---- - drivers/gpio/gpiolib.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/gpio/gpiolib.c -+++ b/drivers/gpio/gpiolib.c -@@ -53,6 +53,8 @@ - #define extra_checks 0 - #endif - -+#define dont_test_bit(b,d) (0) -+ - /* Device and char device-related information */ - static DEFINE_IDA(gpio_ida); - static dev_t gpio_devt; -@@ -2654,7 +2656,7 @@ int gpiod_direction_output(struct gpio_d - value = !!value; - - /* GPIOs used for IRQs shall not be set as output */ -- if (test_bit(FLAG_USED_AS_IRQ, &desc->flags)) { -+ if (dont_test_bit(FLAG_USED_AS_IRQ, &desc->flags)) { - gpiod_err(desc, - "%s: tried to set a GPIO tied to an IRQ as output\n", - __func__); -@@ -3353,7 +3355,7 @@ int gpiochip_lock_as_irq(struct gpio_chi - } - } - -- if (test_bit(FLAG_IS_OUT, &desc->flags)) { -+ if (dont_test_bit(FLAG_IS_OUT, &desc->flags)) { - chip_err(chip, - "%s: tried to flag a GPIO set as output for IRQ\n", - __func__); diff --git a/target/linux/brcm2708/patches-4.19/950-0129-of-configfs-Use-of_overlay_fdt_apply-API-call.patch b/target/linux/brcm2708/patches-4.19/950-0129-of-configfs-Use-of_overlay_fdt_apply-API-call.patch new file mode 100644 index 0000000000..d3e91be8db --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0129-of-configfs-Use-of_overlay_fdt_apply-API-call.patch @@ -0,0 +1,114 @@ +From fe78e259c356ef883528c5ec3527c714a5966c0c Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 14 Jun 2018 15:07:26 +0100 +Subject: [PATCH] of: configfs: Use of_overlay_fdt_apply API call + +The published API to the dynamic overlay application mechanism now +takes a Flattened Device Tree blob as input so that it can manage the +lifetime of the unflattened tree. Conveniently, the new API call - +of_overlay_fdt_apply - is virtually a drop-in replacement for +create_overlay, which can now be deleted. + +Signed-off-by: Phil Elwell +--- + drivers/of/configfs.c | 47 +++++++------------------------------------ + 1 file changed, 7 insertions(+), 40 deletions(-) + +--- a/drivers/of/configfs.c ++++ b/drivers/of/configfs.c +@@ -40,41 +40,6 @@ struct cfs_overlay_item { + int dtbo_size; + }; + +-static int create_overlay(struct cfs_overlay_item *overlay, void *blob) +-{ +- int err; +- +- /* unflatten the tree */ +- of_fdt_unflatten_tree(blob, NULL, &overlay->overlay); +- if (overlay->overlay == NULL) { +- pr_err("%s: failed to unflatten tree\n", __func__); +- err = -EINVAL; +- goto out_err; +- } +- pr_debug("%s: unflattened OK\n", __func__); +- +- /* mark it as detached */ +- of_node_set_flag(overlay->overlay, OF_DETACHED); +- +- /* perform resolution */ +- err = of_resolve_phandles(overlay->overlay); +- if (err != 0) { +- pr_err("%s: Failed to resolve tree\n", __func__); +- goto out_err; +- } +- pr_debug("%s: resolved OK\n", __func__); +- +- err = of_overlay_apply(overlay->overlay, &overlay->ov_id); +- if (err < 0) { +- pr_err("%s: Failed to create overlay (err=%d)\n", +- __func__, err); +- goto out_err; +- } +- +-out_err: +- return err; +-} +- + static inline struct cfs_overlay_item *to_cfs_overlay_item( + struct config_item *item) + { +@@ -115,7 +80,8 @@ static ssize_t cfs_overlay_item_path_sto + if (err != 0) + goto out_err; + +- err = create_overlay(overlay, (void *)overlay->fw->data); ++ err = of_overlay_fdt_apply((void *)overlay->fw->data, ++ (u32)overlay->fw->size, &overlay->ov_id); + if (err != 0) + goto out_err; + +@@ -136,7 +102,7 @@ static ssize_t cfs_overlay_item_status_s + struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); + + return sprintf(page, "%s\n", +- overlay->ov_id >= 0 ? "applied" : "unapplied"); ++ overlay->ov_id > 0 ? "applied" : "unapplied"); + } + + CONFIGFS_ATTR(cfs_overlay_item_, path); +@@ -188,7 +154,8 @@ ssize_t cfs_overlay_item_dtbo_write(stru + + overlay->dtbo_size = count; + +- err = create_overlay(overlay, overlay->dtbo); ++ err = of_overlay_fdt_apply(overlay->dtbo, overlay->dtbo_size, ++ &overlay->ov_id); + if (err != 0) + goto out_err; + +@@ -198,6 +165,7 @@ out_err: + kfree(overlay->dtbo); + overlay->dtbo = NULL; + overlay->dtbo_size = 0; ++ overlay->ov_id = 0; + + return err; + } +@@ -213,7 +181,7 @@ static void cfs_overlay_release(struct c + { + struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); + +- if (overlay->ov_id >= 0) ++ if (overlay->ov_id > 0) + of_overlay_remove(&overlay->ov_id); + if (overlay->fw) + release_firmware(overlay->fw); +@@ -241,7 +209,6 @@ static struct config_item *cfs_overlay_g + overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); + if (!overlay) + return ERR_PTR(-ENOMEM); +- overlay->ov_id = -1; + + config_item_init_type_name(&overlay->item, name, &cfs_overlay_type); + return &overlay->item; diff --git a/target/linux/brcm2708/patches-4.19/950-0130-Add-ability-to-export-gpio-used-by-gpio-poweroff.patch b/target/linux/brcm2708/patches-4.19/950-0130-Add-ability-to-export-gpio-used-by-gpio-poweroff.patch deleted file mode 100644 index f38cdce1b3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0130-Add-ability-to-export-gpio-used-by-gpio-poweroff.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 3e060982d93902bcca8503df4e33d6cd1e41e21b Mon Sep 17 00:00:00 2001 -From: Nick Bulleid -Date: Thu, 10 May 2018 21:57:02 +0100 -Subject: [PATCH 130/806] Add ability to export gpio used by gpio-poweroff - -Signed-off-by: Nick Bulleid - -Added export feature to gpio-poweroff documentation - -Signed-off-by: Nick Bulleid ---- - .../devicetree/bindings/power/reset/gpio-poweroff.txt | 1 + - drivers/power/reset/gpio-poweroff.c | 9 +++++++++ - 2 files changed, 10 insertions(+) - ---- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt -+++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt -@@ -29,6 +29,7 @@ Optional properties: - inactive state. - - timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is - specified, 3000 ms is used. -+- export : Export the GPIO line to the sysfs system - - Examples: - ---- a/drivers/power/reset/gpio-poweroff.c -+++ b/drivers/power/reset/gpio-poweroff.c -@@ -52,6 +52,7 @@ static int gpio_poweroff_probe(struct pl - bool input = false; - enum gpiod_flags flags; - bool force = false; -+ bool export = false; - - /* If a pm_power_off function has already been added, leave it alone */ - force = of_property_read_bool(pdev->dev.of_node, "force"); -@@ -74,6 +75,12 @@ static int gpio_poweroff_probe(struct pl - if (IS_ERR(reset_gpio)) - return PTR_ERR(reset_gpio); - -+ export = of_property_read_bool(pdev->dev.of_node, "export"); -+ if (export) { -+ gpiod_export(reset_gpio, false); -+ gpiod_export_link(&pdev->dev, "poweroff-gpio", reset_gpio); -+ } -+ - pm_power_off = &gpio_poweroff_do_poweroff; - return 0; - } -@@ -83,6 +90,8 @@ static int gpio_poweroff_remove(struct p - if (pm_power_off == &gpio_poweroff_do_poweroff) - pm_power_off = NULL; - -+ gpiod_unexport(reset_gpio); -+ - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0130-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch b/target/linux/brcm2708/patches-4.19/950-0130-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch new file mode 100644 index 0000000000..1e3944b859 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0130-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch @@ -0,0 +1,56 @@ +From 59555269e09f06ae0ded9007c4aa02fa55ce71ca Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 13 Jun 2018 15:21:10 +0100 +Subject: [PATCH] net: lan78xx: Disable TCP Segmentation Offload (TSO) + +TSO seems to be having issues when packets are dropped and the +remote end uses Selective Acknowledge (SACK) to denote that +data is missing. The missing data is never resent, so the +connection eventually stalls. + +There is a module parameter of enable_tso added to allow +further debugging without forcing a rebuild of the kernel. + +https://github.com/raspberrypi/linux/issues/2449 +https://github.com/raspberrypi/linux/issues/2482 + +Signed-off-by: Dave Stevenson +--- + drivers/net/usb/lan78xx.c | 19 +++++++++++++++++-- + 1 file changed, 17 insertions(+), 2 deletions(-) + +--- a/drivers/net/usb/lan78xx.c ++++ b/drivers/net/usb/lan78xx.c +@@ -439,6 +439,15 @@ static int msg_level = -1; + module_param(msg_level, int, 0); + MODULE_PARM_DESC(msg_level, "Override default message level"); + ++/* TSO seems to be having some issue with Selective Acknowledge (SACK) that ++ * results in lost data never being retransmitted. ++ * Disable it by default now, but adds a module parameter to enable it for ++ * debug purposes (the full cause is not currently understood). ++ */ ++static bool enable_tso; ++module_param(enable_tso, bool, 0644); ++MODULE_PARM_DESC(enable_tso, "Enables TCP segmentation offload"); ++ + static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data) + { + u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL); +@@ -3011,8 +3020,14 @@ static int lan78xx_bind(struct lan78xx_n + if (DEFAULT_RX_CSUM_ENABLE) + dev->net->features |= NETIF_F_RXCSUM; + +- if (DEFAULT_TSO_CSUM_ENABLE) +- dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG; ++ if (DEFAULT_TSO_CSUM_ENABLE) { ++ dev->net->features |= NETIF_F_SG; ++ /* Use module parameter to control TCP segmentation offload as ++ * it appears to cause issues. ++ */ ++ if (enable_tso) ++ dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6; ++ } + + if (DEFAULT_VLAN_RX_OFFLOAD) + dev->net->features |= NETIF_F_HW_VLAN_CTAG_RX; diff --git a/target/linux/brcm2708/patches-4.19/950-0131-firmware-raspberrypi-Notify-firmware-of-a-reboot.patch b/target/linux/brcm2708/patches-4.19/950-0131-firmware-raspberrypi-Notify-firmware-of-a-reboot.patch deleted file mode 100644 index f74f75e769..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0131-firmware-raspberrypi-Notify-firmware-of-a-reboot.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 68aaa2f653c83f8fda6032153566b4f895dff524 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Sat, 12 May 2018 21:35:43 +0100 -Subject: [PATCH 131/806] firmware/raspberrypi: Notify firmware of a reboot - -Register for reboot notifications, sending RPI_FIRMWARE_NOTIFY_REBOOT -over the mailbox interface on reception. - -Signed-off-by: Phil Elwell ---- - drivers/firmware/raspberrypi.c | 40 +++++++++++++++++++++++++++++++++- - 1 file changed, 39 insertions(+), 1 deletion(-) - ---- a/drivers/firmware/raspberrypi.c -+++ b/drivers/firmware/raspberrypi.c -@@ -15,6 +15,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -175,6 +176,26 @@ int rpi_firmware_property(struct rpi_fir - } - EXPORT_SYMBOL_GPL(rpi_firmware_property); - -+static int rpi_firmware_notify_reboot(struct notifier_block *nb, -+ unsigned long action, -+ void *data) -+{ -+ struct rpi_firmware *fw; -+ struct platform_device *pdev = g_pdev; -+ -+ if (!pdev) -+ return 0; -+ -+ fw = platform_get_drvdata(pdev); -+ if (!fw) -+ return 0; -+ -+ (void)rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_REBOOT, -+ 0, 0); -+ -+ return 0; -+} -+ - static void - rpi_firmware_print_firmware_revision(struct rpi_firmware *fw) - { -@@ -285,15 +306,32 @@ static struct platform_driver rpi_firmwa - .remove = rpi_firmware_remove, - }; - -+static struct notifier_block rpi_firmware_reboot_notifier = { -+ .notifier_call = rpi_firmware_notify_reboot, -+}; -+ - static int __init rpi_firmware_init(void) - { -- return platform_driver_register(&rpi_firmware_driver); -+ int ret = register_reboot_notifier(&rpi_firmware_reboot_notifier); -+ if (ret) -+ goto out1; -+ ret = platform_driver_register(&rpi_firmware_driver); -+ if (ret) -+ goto out2; -+ -+ return 0; -+ -+out2: -+ unregister_reboot_notifier(&rpi_firmware_reboot_notifier); -+out1: -+ return ret; - } - subsys_initcall(rpi_firmware_init); - - static void __init rpi_firmware_exit(void) - { - platform_driver_unregister(&rpi_firmware_driver); -+ unregister_reboot_notifier(&rpi_firmware_reboot_notifier); - } - module_exit(rpi_firmware_exit); - diff --git a/target/linux/brcm2708/patches-4.19/950-0131-lan78xx-Move-enabling-of-EEE-into-PHY-init-code.patch b/target/linux/brcm2708/patches-4.19/950-0131-lan78xx-Move-enabling-of-EEE-into-PHY-init-code.patch new file mode 100644 index 0000000000..a1dfb00af7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0131-lan78xx-Move-enabling-of-EEE-into-PHY-init-code.patch @@ -0,0 +1,64 @@ +From 75ec78040e02200dfc2ad4e35c289086334fbee2 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 5 Apr 2018 14:46:11 +0100 +Subject: [PATCH] lan78xx: Move enabling of EEE into PHY init code + +Enable EEE mode as soon as possible after connecting to the PHY, and +before phy_start. This avoids a second link negotiation, which speeds +up booting and stops the interface failing to become ready. + +See: https://github.com/raspberrypi/linux/issues/2437 + +Signed-off-by: Phil Elwell +--- + drivers/net/usb/lan78xx.c | 32 ++++++++++++++++---------------- + 1 file changed, 16 insertions(+), 16 deletions(-) + +--- a/drivers/net/usb/lan78xx.c ++++ b/drivers/net/usb/lan78xx.c +@@ -2189,6 +2189,22 @@ static int lan78xx_phy_init(struct lan78 + mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control); + phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv); + ++ if (of_property_read_bool(dev->udev->dev.of_node, ++ "microchip,eee-enabled")) { ++ struct ethtool_eee edata; ++ memset(&edata, 0, sizeof(edata)); ++ edata.cmd = ETHTOOL_SEEE; ++ edata.advertised = ADVERTISED_1000baseT_Full | ++ ADVERTISED_100baseT_Full; ++ edata.eee_enabled = true; ++ edata.tx_lpi_enabled = true; ++ if (of_property_read_u32(dev->udev->dev.of_node, ++ "microchip,tx-lpi-timer", ++ &edata.tx_lpi_timer)) ++ edata.tx_lpi_timer = 600; /* non-aggressive */ ++ (void)lan78xx_set_eee(dev->net, &edata); ++ } ++ + if (phydev->mdio.dev.of_node) { + u32 reg; + int len; +@@ -2666,22 +2682,6 @@ static int lan78xx_open(struct net_devic + + netif_dbg(dev, ifup, dev->net, "phy initialised successfully"); + +- if (of_property_read_bool(dev->udev->dev.of_node, +- "microchip,eee-enabled")) { +- struct ethtool_eee edata; +- memset(&edata, 0, sizeof(edata)); +- edata.cmd = ETHTOOL_SEEE; +- edata.advertised = ADVERTISED_1000baseT_Full | +- ADVERTISED_100baseT_Full; +- edata.eee_enabled = true; +- edata.tx_lpi_enabled = true; +- if (of_property_read_u32(dev->udev->dev.of_node, +- "microchip,tx-lpi-timer", +- &edata.tx_lpi_timer)) +- edata.tx_lpi_timer = 600; /* non-aggressive */ +- (void)lan78xx_set_eee(net, &edata); +- } +- + /* for Link Check */ + if (dev->urb_intr) { + ret = usb_submit_urb(dev->urb_intr, GFP_KERNEL); diff --git a/target/linux/brcm2708/patches-4.19/950-0132-irqchip-irq-bcm2835-Calc.-FIQ_START-at-boot-time.patch b/target/linux/brcm2708/patches-4.19/950-0132-irqchip-irq-bcm2835-Calc.-FIQ_START-at-boot-time.patch deleted file mode 100644 index 16145fed34..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0132-irqchip-irq-bcm2835-Calc.-FIQ_START-at-boot-time.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 3166f055a568c4fe127b70b81a878ab59070a6f5 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 14 Jun 2018 11:21:04 +0100 -Subject: [PATCH 132/806] irqchip: irq-bcm2835: Calc. FIQ_START at boot-time - -ad83c7cb2f37 ("irqchip/irq-bcm2836: Add support for DT interrupt polarity") -changed the way that the BCM2836/7 local interrupts are mapped; instead -of being pre-mapped they are now mapped on-demand. A side effect of this -change is that the call to irq_of_parse_and_map from armctrl_of_init -creates a new mapping, forming a gap between the IRQs and the FIQs. This - gap breaks the FIQ<->IRQ mapping which up to now has been done by assuming: - -1) that the value of FIQ_START is the same as the number of normal IRQs -that will be mapped (still true), and - -2) that this value is also the offset between an IRQ and its equivalent -FIQ (which is no longer the case). - -Remove both assumptions by measuring the interval between the last IRQ -and the last FIQ, passing it as the parameter to init_FIQ(). - -Fixes: https://github.com/raspberrypi/linux/issues/2432 - -Signed-off-by: Phil Elwell ---- - drivers/irqchip/irq-bcm2835.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/irqchip/irq-bcm2835.c -+++ b/drivers/irqchip/irq-bcm2835.c -@@ -82,8 +82,6 @@ - #define NR_BANKS 3 - #define IRQS_PER_BANK 32 - #define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0) --#undef FIQ_START --#define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0)) - - static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; - static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 }; -@@ -211,7 +209,7 @@ static int __init armctrl_of_init(struct - bool is_2836) - { - void __iomem *base; -- int irq, b, i; -+ int irq = 0, last_irq, b, i; - - base = of_iomap(node, 0); - if (!base) -@@ -237,6 +235,8 @@ static int __init armctrl_of_init(struct - } - } - -+ last_irq = irq; -+ - if (is_2836) { - int parent_irq = irq_of_parse_and_map(node, 0); - -@@ -267,7 +267,7 @@ static int __init armctrl_of_init(struct - } - } - #ifndef CONFIG_ARM64 -- init_FIQ(FIQ_START); -+ init_FIQ(irq - last_irq); - #endif - - return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0132-staging-vc04_services-Derive-g_cache_line_size.patch b/target/linux/brcm2708/patches-4.19/950-0132-staging-vc04_services-Derive-g_cache_line_size.patch new file mode 100644 index 0000000000..f7bc93fdb8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0132-staging-vc04_services-Derive-g_cache_line_size.patch @@ -0,0 +1,64 @@ +From 6bc13b1a867a5fd769f2be713ce9c9d863534bff Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 28 Aug 2018 10:40:40 +0100 +Subject: [PATCH] staging/vc04_services: Derive g_cache_line_size + +The ARM coprocessor registers include dcache line size, but there is no +function to expose this value. Rather than create a new one, use the +read_cpuid_id function to derive the correct value, which is 32 for +BCM2835 and 64 for BCM2836/7. + +Signed-off-by: Phil Elwell +--- + .../interface/vchiq_arm/vchiq_2835_arm.c | 24 +++++++++++++++---- + 1 file changed, 19 insertions(+), 5 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +@@ -42,6 +42,7 @@ + #include + #include + #include ++#include + #include + + #define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32) +@@ -81,13 +82,15 @@ static void __iomem *g_regs; + * VPU firmware, which determines the required alignment of the + * offsets/sizes in pagelists. + * +- * Modern VPU firmware looks for a DT "cache-line-size" property in +- * the VCHIQ node and will overwrite it with the actual L2 cache size, ++ * Previous VPU firmware looked for a DT "cache-line-size" property in ++ * the VCHIQ node and would overwrite it with the actual L2 cache size, + * which the kernel must then respect. That property was rejected +- * upstream, so we have to use the VPU firmware's compatibility value +- * of 32. ++ * upstream, so we now rely on both sides to "do the right thing" independently ++ * of the other. To improve backwards compatibility, this new behaviour is ++ * signalled to the firmware by the use of a corrected "reg" property on the ++ * relevant Device Tree node. + */ +-static unsigned int g_cache_line_size = 32; ++static unsigned int g_cache_line_size; + static unsigned int g_fragments_size; + static char *g_fragments_base; + static char *g_free_fragments; +@@ -127,6 +130,17 @@ int vchiq_platform_init(struct platform_ + if (err < 0) + return err; + ++ /* ++ * The tempting L1_CACHE_BYTES macro doesn't work in the case of ++ * a kernel built with bcm2835_defconfig running on a BCM2836/7 ++ * processor, hence the need for a runtime check. The dcache line size ++ * is encoded in one of the coprocessor registers, but there is no ++ * convenient way to access it short of embedded assembler, hence ++ * the use of read_cpuid_id(). The following test evaluates to true ++ * on a BCM2835 showing that it is ARMv6-ish, whereas ++ * cpu_architecture() will indicate that it is an ARMv7. ++ */ ++ g_cache_line_size = ((read_cpuid_id() & 0x7f000) == 0x7b000) ? 32 : 64; + g_fragments_size = 2 * g_cache_line_size; + + /* Allocate space for the channels in coherent memory */ diff --git a/target/linux/brcm2708/patches-4.19/950-0133-Add-rpi-poe-fan-driver.patch b/target/linux/brcm2708/patches-4.19/950-0133-Add-rpi-poe-fan-driver.patch new file mode 100644 index 0000000000..b393306408 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0133-Add-rpi-poe-fan-driver.patch @@ -0,0 +1,682 @@ +From e6528f67b96f52ea77d95a59e75d8270bb53aade Mon Sep 17 00:00:00 2001 +From: Serge Schneider +Date: Mon, 9 Jul 2018 12:54:25 +0100 +Subject: [PATCH] Add rpi-poe-fan driver + +Signed-off-by: Serge Schneider + +PoE HAT driver cleanup + +* Fix undeclared variable in rpi_poe_fan_suspend +* Add SPDX-License-Identifier +* Expand PoE acronym in Kconfig help +* Give clearer error message on of_property_count_u32_elems fail +* Add documentation +* Add vendor to of_device_id compatible string. +* Rename m_data_s struct to fw_data_s +* Fix typos + +Fixes: #2665 + +Signed-off-by: Serge Schneider +--- + .../devicetree/bindings/hwmon/rpi-poe-fan.txt | 55 +++ + Documentation/hwmon/rpi-poe-fan | 15 + + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 + + .../arm/boot/dts/overlays/rpi-poe-overlay.dts | 61 +++ + drivers/hwmon/Kconfig | 11 + + drivers/hwmon/Makefile | 1 + + drivers/hwmon/rpi-poe-fan.c | 436 ++++++++++++++++++ + include/soc/bcm2835/raspberrypi-firmware.h | 2 + + 11 files changed, 590 insertions(+) + create mode 100644 Documentation/devicetree/bindings/hwmon/rpi-poe-fan.txt + create mode 100644 Documentation/hwmon/rpi-poe-fan + create mode 100644 arch/arm/boot/dts/overlays/rpi-poe-overlay.dts + create mode 100644 drivers/hwmon/rpi-poe-fan.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/hwmon/rpi-poe-fan.txt +@@ -0,0 +1,55 @@ ++Bindings for the Raspberry Pi PoE HAT fan ++ ++Required properties: ++- compatible : "raspberrypi,rpi-poe-fan" ++- firmware : Reference to the RPi firmware device node ++- pwms : the PWM that is used to control the PWM fan ++- cooling-levels : PWM duty cycle values in a range from 0 to 255 ++ which correspond to thermal cooling states ++ ++Example: ++ fan0: rpi-poe-fan@0 { ++ compatible = "raspberrypi,rpi-poe-fan"; ++ firmware = <&firmware>; ++ cooling-min-state = <0>; ++ cooling-max-state = <3>; ++ #cooling-cells = <2>; ++ cooling-levels = <0 50 150 255>; ++ status = "okay"; ++ }; ++ ++ thermal-zones { ++ cpu_thermal: cpu-thermal { ++ trips { ++ threshold: trip-point@0 { ++ temperature = <45000>; ++ hysteresis = <5000>; ++ type = "active"; ++ }; ++ target: trip-point@1 { ++ temperature = <50000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ cpu_hot: cpu_hot@0 { ++ temperature = <55000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ }; ++ cooling-maps { ++ map0 { ++ trip = <&threshold>; ++ cooling-device = <&fan0 0 1>; ++ }; ++ map1 { ++ trip = <&target>; ++ cooling-device = <&fan0 1 2>; ++ }; ++ map2 { ++ trip = <&cpu_hot>; ++ cooling-device = <&fan0 2 3>; ++ }; ++ }; ++ }; ++ }; +--- /dev/null ++++ b/Documentation/hwmon/rpi-poe-fan +@@ -0,0 +1,15 @@ ++Kernel driver rpi-poe-fan ++===================== ++ ++This driver enables the use of the Raspberry Pi PoE HAT fan. ++ ++Author: Serge Schneider ++ ++Description ++----------- ++ ++The driver implements a simple interface for driving the Raspberry Pi PoE ++(Power over Ethernet) HAT fan. The driver passes commands to the Raspberry Pi ++firmware through the mailbox property interface. The firmware then forwards ++the commands to the board over I2C on the ID_EEPROM pins. The driver exposes ++the fan to the user space through the hwmon sysfs interface. +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -100,6 +100,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + rpi-dac.dtbo \ + rpi-display.dtbo \ + rpi-ft5406.dtbo \ ++ rpi-poe.dtbo \ + rpi-proto.dtbo \ + rpi-sense.dtbo \ + rpi-tv.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1515,6 +1515,12 @@ Params: touchscreen-size-x Touchscr + touchscreen-swapped-x-y Swap X and Y cordinates (default 0); + + ++Name: rpi-poe ++Info: Raspberry Pi POE HAT ++Load: dtoverlay=rpi-poe ++Params: ++ ++ + Name: rpi-proto + Info: Configures the RPi Proto audio card + Load: dtoverlay=rpi-proto +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts +@@ -0,0 +1,61 @@ ++/* ++ * Overlay for the Raspberry Pi POE HAT. ++ */ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ fan0: rpi-poe-fan@0 { ++ compatible = "raspberrypi,rpi-poe-fan"; ++ firmware = <&firmware>; ++ cooling-min-state = <0>; ++ cooling-max-state = <3>; ++ #cooling-cells = <2>; ++ cooling-levels = <0 50 150 255>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&cpu_thermal>; ++ __overlay__ { ++ trips { ++ threshold: trip-point@0 { ++ temperature = <45000>; ++ hysteresis = <5000>; ++ type = "active"; ++ }; ++ target: trip-point@1 { ++ temperature = <50000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ cpu_hot: cpu_hot@0 { ++ temperature = <55000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ }; ++ cooling-maps { ++ map0 { ++ trip = <&threshold>; ++ cooling-device = <&fan0 0 1>; ++ }; ++ map1 { ++ trip = <&target>; ++ cooling-device = <&fan0 1 2>; ++ }; ++ map2 { ++ trip = <&cpu_hot>; ++ cooling-device = <&fan0 2 3>; ++ }; ++ }; ++ }; ++ }; ++}; +--- a/drivers/hwmon/Kconfig ++++ b/drivers/hwmon/Kconfig +@@ -1330,6 +1330,17 @@ config SENSORS_RASPBERRYPI_HWMON + This driver can also be built as a module. If so, the module + will be called raspberrypi-hwmon. + ++config SENSORS_RPI_POE_FAN ++ tristate "Raspberry Pi PoE HAT fan" ++ depends on RASPBERRYPI_FIRMWARE ++ depends on THERMAL || THERMAL=n ++ help ++ If you say yes here you get support for Raspberry Pi PoE (Power over ++ Ethernet) HAT fan. ++ ++ This driver can also be built as a module. If so, the module ++ will be called rpi-poe-fan. ++ + config SENSORS_SHT15 + tristate "Sensiron humidity and temperature sensors. SHT15 and compat." + depends on GPIOLIB || COMPILE_TEST +--- a/drivers/hwmon/Makefile ++++ b/drivers/hwmon/Makefile +@@ -144,6 +144,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591 + obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o + obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o + obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o ++obj-$(CONFIG_SENSORS_RPI_POE_FAN) += rpi-poe-fan.o + obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o + obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o + obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o +--- /dev/null ++++ b/drivers/hwmon/rpi-poe-fan.c +@@ -0,0 +1,436 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * rpi-poe-fan.c - Hwmon driver for Raspberry Pi PoE HAT fan. ++ * ++ * Copyright (C) 2018 Raspberry Pi (Trading) Ltd. ++ * Based on pwm-fan.c by Kamil Debski ++ * ++ * Author: Serge Schneider ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MAX_PWM 255 ++ ++#define POE_CUR_PWM 0x0 ++#define POE_DEF_PWM 0x1 ++ ++struct rpi_poe_fan_ctx { ++ struct mutex lock; ++ struct rpi_firmware *fw; ++ unsigned int pwm_value; ++ unsigned int def_pwm_value; ++ unsigned int rpi_poe_fan_state; ++ unsigned int rpi_poe_fan_max_state; ++ unsigned int *rpi_poe_fan_cooling_levels; ++ struct thermal_cooling_device *cdev; ++ struct notifier_block nb; ++}; ++ ++struct fw_tag_data_s{ ++ u32 reg; ++ u32 val; ++ u32 ret; ++}; ++ ++static int write_reg(struct rpi_firmware *fw, u32 reg, u32 *val){ ++ struct fw_tag_data_s fw_tag_data = { ++ .reg = reg, ++ .val = *val ++ }; ++ int ret; ++ ret = rpi_firmware_property(fw, RPI_FIRMWARE_SET_POE_HAT_VAL, ++ &fw_tag_data, sizeof(fw_tag_data)); ++ if (ret) { ++ return ret; ++ } else if (fw_tag_data.ret) { ++ return -EIO; ++ } ++ return 0; ++} ++ ++static int read_reg(struct rpi_firmware *fw, u32 reg, u32 *val){ ++ struct fw_tag_data_s fw_tag_data = { ++ .reg = reg, ++ }; ++ int ret; ++ ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_POE_HAT_VAL, ++ &fw_tag_data, sizeof(fw_tag_data)); ++ if (ret) { ++ return ret; ++ } else if (fw_tag_data.ret) { ++ return -EIO; ++ } ++ *val = fw_tag_data.val; ++ return 0; ++} ++ ++static int rpi_poe_reboot(struct notifier_block *nb, unsigned long code, ++ void *unused) ++{ ++ struct rpi_poe_fan_ctx *ctx = container_of(nb, struct rpi_poe_fan_ctx, ++ nb); ++ ++ if (ctx->pwm_value != ctx->def_pwm_value) ++ write_reg(ctx->fw, POE_CUR_PWM, &ctx->def_pwm_value); ++ ++ return NOTIFY_DONE; ++} ++ ++static int __set_pwm(struct rpi_poe_fan_ctx *ctx, u32 pwm) ++{ ++ int ret = 0; ++ ++ mutex_lock(&ctx->lock); ++ if (ctx->pwm_value == pwm) ++ goto exit_set_pwm_err; ++ ++ ret = write_reg(ctx->fw, POE_CUR_PWM, &pwm); ++ if (!ret) ++ ctx->pwm_value = pwm; ++exit_set_pwm_err: ++ mutex_unlock(&ctx->lock); ++ return ret; ++} ++ ++static int __set_def_pwm(struct rpi_poe_fan_ctx *ctx, u32 def_pwm) ++{ ++ int ret = 0; ++ mutex_lock(&ctx->lock); ++ if (ctx->def_pwm_value == def_pwm) ++ goto exit_set_def_pwm_err; ++ ++ ret = write_reg(ctx->fw, POE_CUR_PWM, &def_pwm); ++ if (!ret) ++ ctx->def_pwm_value = def_pwm; ++exit_set_def_pwm_err: ++ mutex_unlock(&ctx->lock); ++ return ret; ++} ++ ++static void rpi_poe_fan_update_state(struct rpi_poe_fan_ctx *ctx, ++ unsigned long pwm) ++{ ++ int i; ++ ++ for (i = 0; i < ctx->rpi_poe_fan_max_state; ++i) ++ if (pwm < ctx->rpi_poe_fan_cooling_levels[i + 1]) ++ break; ++ ++ ctx->rpi_poe_fan_state = i; ++} ++ ++static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); ++ unsigned long pwm; ++ int ret; ++ ++ if (kstrtoul(buf, 10, &pwm) || pwm > MAX_PWM) ++ return -EINVAL; ++ ++ ret = __set_pwm(ctx, pwm); ++ if (ret) ++ return ret; ++ ++ rpi_poe_fan_update_state(ctx, pwm); ++ return count; ++} ++ ++static ssize_t set_def_pwm(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); ++ unsigned long def_pwm; ++ int ret; ++ ++ if (kstrtoul(buf, 10, &def_pwm) || def_pwm > MAX_PWM) ++ return -EINVAL; ++ ++ ret = __set_def_pwm(ctx, def_pwm); ++ if (ret) ++ return ret; ++ return count; ++} ++ ++static ssize_t show_pwm(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); ++ ++ return sprintf(buf, "%u\n", ctx->pwm_value); ++} ++ ++static ssize_t show_def_pwm(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); ++ ++ return sprintf(buf, "%u\n", ctx->def_pwm_value); ++} ++ ++ ++static SENSOR_DEVICE_ATTR(pwm1, 0644, show_pwm, set_pwm, 0); ++static SENSOR_DEVICE_ATTR(def_pwm1, 0644, show_def_pwm, set_def_pwm, 1); ++ ++static struct attribute *rpi_poe_fan_attrs[] = { ++ &sensor_dev_attr_pwm1.dev_attr.attr, ++ &sensor_dev_attr_def_pwm1.dev_attr.attr, ++ NULL, ++}; ++ ++ATTRIBUTE_GROUPS(rpi_poe_fan); ++ ++/* thermal cooling device callbacks */ ++static int rpi_poe_fan_get_max_state(struct thermal_cooling_device *cdev, ++ unsigned long *state) ++{ ++ struct rpi_poe_fan_ctx *ctx = cdev->devdata; ++ ++ if (!ctx) ++ return -EINVAL; ++ ++ *state = ctx->rpi_poe_fan_max_state; ++ ++ return 0; ++} ++ ++static int rpi_poe_fan_get_cur_state(struct thermal_cooling_device *cdev, ++ unsigned long *state) ++{ ++ struct rpi_poe_fan_ctx *ctx = cdev->devdata; ++ ++ if (!ctx) ++ return -EINVAL; ++ ++ *state = ctx->rpi_poe_fan_state; ++ ++ return 0; ++} ++ ++static int rpi_poe_fan_set_cur_state(struct thermal_cooling_device *cdev, ++ unsigned long state) ++{ ++ struct rpi_poe_fan_ctx *ctx = cdev->devdata; ++ int ret; ++ ++ if (!ctx || (state > ctx->rpi_poe_fan_max_state)) ++ return -EINVAL; ++ ++ if (state == ctx->rpi_poe_fan_state) ++ return 0; ++ ++ ret = __set_pwm(ctx, ctx->rpi_poe_fan_cooling_levels[state]); ++ if (ret) { ++ dev_err(&cdev->device, "Cannot set pwm!\n"); ++ return ret; ++ } ++ ++ ctx->rpi_poe_fan_state = state; ++ ++ return ret; ++} ++ ++static const struct thermal_cooling_device_ops rpi_poe_fan_cooling_ops = { ++ .get_max_state = rpi_poe_fan_get_max_state, ++ .get_cur_state = rpi_poe_fan_get_cur_state, ++ .set_cur_state = rpi_poe_fan_set_cur_state, ++}; ++ ++static int rpi_poe_fan_of_get_cooling_data(struct device *dev, ++ struct rpi_poe_fan_ctx *ctx) ++{ ++ struct device_node *np = dev->of_node; ++ int num, i, ret; ++ ++ if (!of_find_property(np, "cooling-levels", NULL)) ++ return 0; ++ ++ ret = of_property_count_u32_elems(np, "cooling-levels"); ++ if (ret <= 0) { ++ dev_err(dev, "cooling-levels property missing or invalid: %d\n", ++ ret); ++ return ret ? : -EINVAL; ++ } ++ ++ num = ret; ++ ctx->rpi_poe_fan_cooling_levels = devm_kzalloc(dev, num * sizeof(u32), ++ GFP_KERNEL); ++ if (!ctx->rpi_poe_fan_cooling_levels) ++ return -ENOMEM; ++ ++ ret = of_property_read_u32_array(np, "cooling-levels", ++ ctx->rpi_poe_fan_cooling_levels, num); ++ if (ret) { ++ dev_err(dev, "Property 'cooling-levels' cannot be read!\n"); ++ return ret; ++ } ++ ++ for (i = 0; i < num; i++) { ++ if (ctx->rpi_poe_fan_cooling_levels[i] > MAX_PWM) { ++ dev_err(dev, "PWM fan state[%d]:%d > %d\n", i, ++ ctx->rpi_poe_fan_cooling_levels[i], MAX_PWM); ++ return -EINVAL; ++ } ++ } ++ ++ ctx->rpi_poe_fan_max_state = num - 1; ++ ++ return 0; ++} ++ ++static int rpi_poe_fan_probe(struct platform_device *pdev) ++{ ++ struct thermal_cooling_device *cdev; ++ struct rpi_poe_fan_ctx *ctx; ++ struct device *hwmon; ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *fw_node; ++ int ret; ++ ++ fw_node = of_parse_phandle(np, "firmware", 0); ++ if (!fw_node) { ++ dev_err(&pdev->dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); ++ if (!ctx) ++ return -ENOMEM; ++ ++ mutex_init(&ctx->lock); ++ ++ ctx->fw = rpi_firmware_get(fw_node); ++ if (!ctx->fw) ++ return -EPROBE_DEFER; ++ ++ platform_set_drvdata(pdev, ctx); ++ ++ ctx->nb.notifier_call = rpi_poe_reboot; ++ ret = register_reboot_notifier(&ctx->nb); ++ if (ret) { ++ dev_err(&pdev->dev, "Failed to register reboot notifier: %i\n", ++ ret); ++ return ret; ++ } ++ ret = read_reg(ctx->fw, POE_DEF_PWM, &ctx->def_pwm_value); ++ if (ret) { ++ dev_err(&pdev->dev, "Failed to get default PWM value: %i\n", ++ ret); ++ goto err; ++ } ++ ret = read_reg(ctx->fw, POE_CUR_PWM, &ctx->pwm_value); ++ if (ret) { ++ dev_err(&pdev->dev, "Failed to get current PWM value: %i\n", ++ ret); ++ goto err; ++ } ++ ++ hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "rpipoefan", ++ ctx, rpi_poe_fan_groups); ++ if (IS_ERR(hwmon)) { ++ dev_err(&pdev->dev, "Failed to register hwmon device\n"); ++ ret = PTR_ERR(hwmon); ++ goto err; ++ } ++ ++ ret = rpi_poe_fan_of_get_cooling_data(&pdev->dev, ctx); ++ if (ret) ++ return ret; ++ ++ rpi_poe_fan_update_state(ctx, ctx->pwm_value); ++ if (!IS_ENABLED(CONFIG_THERMAL)) ++ return 0; ++ ++ cdev = thermal_of_cooling_device_register(np, ++ "rpi-poe-fan", ctx, ++ &rpi_poe_fan_cooling_ops); ++ if (IS_ERR(cdev)) { ++ dev_err(&pdev->dev, ++ "Failed to register rpi-poe-fan as cooling device"); ++ ret = PTR_ERR(cdev); ++ goto err; ++ } ++ ctx->cdev = cdev; ++ thermal_cdev_update(cdev); ++ ++ return 0; ++err: ++ unregister_reboot_notifier(&ctx->nb); ++ return ret; ++} ++ ++static int rpi_poe_fan_remove(struct platform_device *pdev) ++{ ++ struct rpi_poe_fan_ctx *ctx = platform_get_drvdata(pdev); ++ u32 value = ctx->def_pwm_value; ++ ++ unregister_reboot_notifier(&ctx->nb); ++ thermal_cooling_device_unregister(ctx->cdev); ++ if (ctx->pwm_value != value) { ++ write_reg(ctx->fw, POE_CUR_PWM, &value); ++ } ++ return 0; ++} ++ ++#ifdef CONFIG_PM_SLEEP ++static int rpi_poe_fan_suspend(struct device *dev) ++{ ++ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); ++ u32 value = 0; ++ int ret = 0; ++ ++ if (ctx->pwm_value != value) ++ ret = write_reg(ctx->fw, POE_CUR_PWM, &value); ++ return ret; ++} ++ ++static int rpi_poe_fan_resume(struct device *dev) ++{ ++ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); ++ u32 value = ctx->pwm_value; ++ int ret = 0; ++ ++ if (value != 0) ++ ret = write_reg(ctx->fw, POE_CUR_PWM, &value); ++ ++ return ret; ++} ++#endif ++ ++static SIMPLE_DEV_PM_OPS(rpi_poe_fan_pm, rpi_poe_fan_suspend, ++ rpi_poe_fan_resume); ++ ++static const struct of_device_id of_rpi_poe_fan_match[] = { ++ { .compatible = "raspberrypi,rpi-poe-fan", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, of_rpi_poe_fan_match); ++ ++static struct platform_driver rpi_poe_fan_driver = { ++ .probe = rpi_poe_fan_probe, ++ .remove = rpi_poe_fan_remove, ++ .driver = { ++ .name = "rpi-poe-fan", ++ .pm = &rpi_poe_fan_pm, ++ .of_match_table = of_rpi_poe_fan_match, ++ }, ++}; ++ ++module_platform_driver(rpi_poe_fan_driver); ++ ++MODULE_AUTHOR("Serge Schneider "); ++MODULE_ALIAS("platform:rpi-poe-fan"); ++MODULE_DESCRIPTION("Raspberry Pi PoE HAT fan driver"); ++MODULE_LICENSE("GPL"); +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -93,6 +93,8 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043, + RPI_FIRMWARE_GET_PERIPH_REG = 0x00030045, + RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, ++ RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049, ++ RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050, + + + /* Dispmanx TAGS */ diff --git a/target/linux/brcm2708/patches-4.19/950-0133-of-configfs-Use-of_overlay_fdt_apply-API-call.patch b/target/linux/brcm2708/patches-4.19/950-0133-of-configfs-Use-of_overlay_fdt_apply-API-call.patch deleted file mode 100644 index 7dbf51cb0f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0133-of-configfs-Use-of_overlay_fdt_apply-API-call.patch +++ /dev/null @@ -1,114 +0,0 @@ -From fe78e259c356ef883528c5ec3527c714a5966c0c Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 14 Jun 2018 15:07:26 +0100 -Subject: [PATCH 133/806] of: configfs: Use of_overlay_fdt_apply API call - -The published API to the dynamic overlay application mechanism now -takes a Flattened Device Tree blob as input so that it can manage the -lifetime of the unflattened tree. Conveniently, the new API call - -of_overlay_fdt_apply - is virtually a drop-in replacement for -create_overlay, which can now be deleted. - -Signed-off-by: Phil Elwell ---- - drivers/of/configfs.c | 47 +++++++------------------------------------ - 1 file changed, 7 insertions(+), 40 deletions(-) - ---- a/drivers/of/configfs.c -+++ b/drivers/of/configfs.c -@@ -40,41 +40,6 @@ struct cfs_overlay_item { - int dtbo_size; - }; - --static int create_overlay(struct cfs_overlay_item *overlay, void *blob) --{ -- int err; -- -- /* unflatten the tree */ -- of_fdt_unflatten_tree(blob, NULL, &overlay->overlay); -- if (overlay->overlay == NULL) { -- pr_err("%s: failed to unflatten tree\n", __func__); -- err = -EINVAL; -- goto out_err; -- } -- pr_debug("%s: unflattened OK\n", __func__); -- -- /* mark it as detached */ -- of_node_set_flag(overlay->overlay, OF_DETACHED); -- -- /* perform resolution */ -- err = of_resolve_phandles(overlay->overlay); -- if (err != 0) { -- pr_err("%s: Failed to resolve tree\n", __func__); -- goto out_err; -- } -- pr_debug("%s: resolved OK\n", __func__); -- -- err = of_overlay_apply(overlay->overlay, &overlay->ov_id); -- if (err < 0) { -- pr_err("%s: Failed to create overlay (err=%d)\n", -- __func__, err); -- goto out_err; -- } -- --out_err: -- return err; --} -- - static inline struct cfs_overlay_item *to_cfs_overlay_item( - struct config_item *item) - { -@@ -115,7 +80,8 @@ static ssize_t cfs_overlay_item_path_sto - if (err != 0) - goto out_err; - -- err = create_overlay(overlay, (void *)overlay->fw->data); -+ err = of_overlay_fdt_apply((void *)overlay->fw->data, -+ (u32)overlay->fw->size, &overlay->ov_id); - if (err != 0) - goto out_err; - -@@ -136,7 +102,7 @@ static ssize_t cfs_overlay_item_status_s - struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); - - return sprintf(page, "%s\n", -- overlay->ov_id >= 0 ? "applied" : "unapplied"); -+ overlay->ov_id > 0 ? "applied" : "unapplied"); - } - - CONFIGFS_ATTR(cfs_overlay_item_, path); -@@ -188,7 +154,8 @@ ssize_t cfs_overlay_item_dtbo_write(stru - - overlay->dtbo_size = count; - -- err = create_overlay(overlay, overlay->dtbo); -+ err = of_overlay_fdt_apply(overlay->dtbo, overlay->dtbo_size, -+ &overlay->ov_id); - if (err != 0) - goto out_err; - -@@ -198,6 +165,7 @@ out_err: - kfree(overlay->dtbo); - overlay->dtbo = NULL; - overlay->dtbo_size = 0; -+ overlay->ov_id = 0; - - return err; - } -@@ -213,7 +181,7 @@ static void cfs_overlay_release(struct c - { - struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); - -- if (overlay->ov_id >= 0) -+ if (overlay->ov_id > 0) - of_overlay_remove(&overlay->ov_id); - if (overlay->fw) - release_firmware(overlay->fw); -@@ -241,7 +209,6 @@ static struct config_item *cfs_overlay_g - overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); - if (!overlay) - return ERR_PTR(-ENOMEM); -- overlay->ov_id = -1; - - config_item_init_type_name(&overlay->item, name, &cfs_overlay_type); - return &overlay->item; diff --git a/target/linux/brcm2708/patches-4.19/950-0134-cxd2880-CXD2880_SPI_DRV-should-select-DVB_CXD2880-wi.patch b/target/linux/brcm2708/patches-4.19/950-0134-cxd2880-CXD2880_SPI_DRV-should-select-DVB_CXD2880-wi.patch new file mode 100644 index 0000000000..d67c9381ed --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0134-cxd2880-CXD2880_SPI_DRV-should-select-DVB_CXD2880-wi.patch @@ -0,0 +1,20 @@ +From a54bad2a438d7c67b1e012cf31fd2a112bc90e2a Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 17 Sep 2018 17:31:18 +0100 +Subject: [PATCH] cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 + with MEDIA_SUBDRV_AUTOSELECT + +--- + drivers/media/spi/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/media/spi/Kconfig ++++ b/drivers/media/spi/Kconfig +@@ -19,6 +19,7 @@ menu "Media SPI Adapters" + config CXD2880_SPI_DRV + tristate "Sony CXD2880 SPI support" + depends on DVB_CORE && SPI ++ select DVB_CXD2880 if MEDIA_SUBDRV_AUTOSELECT + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Choose if you would like to have SPI interface support for Sony CXD2880. diff --git a/target/linux/brcm2708/patches-4.19/950-0134-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch b/target/linux/brcm2708/patches-4.19/950-0134-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch deleted file mode 100644 index b33c4f4374..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0134-net-lan78xx-Disable-TCP-Segmentation-Offload-TSO.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 59555269e09f06ae0ded9007c4aa02fa55ce71ca Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 13 Jun 2018 15:21:10 +0100 -Subject: [PATCH 134/806] net: lan78xx: Disable TCP Segmentation Offload (TSO) - -TSO seems to be having issues when packets are dropped and the -remote end uses Selective Acknowledge (SACK) to denote that -data is missing. The missing data is never resent, so the -connection eventually stalls. - -There is a module parameter of enable_tso added to allow -further debugging without forcing a rebuild of the kernel. - -https://github.com/raspberrypi/linux/issues/2449 -https://github.com/raspberrypi/linux/issues/2482 - -Signed-off-by: Dave Stevenson ---- - drivers/net/usb/lan78xx.c | 19 +++++++++++++++++-- - 1 file changed, 17 insertions(+), 2 deletions(-) - ---- a/drivers/net/usb/lan78xx.c -+++ b/drivers/net/usb/lan78xx.c -@@ -439,6 +439,15 @@ static int msg_level = -1; - module_param(msg_level, int, 0); - MODULE_PARM_DESC(msg_level, "Override default message level"); - -+/* TSO seems to be having some issue with Selective Acknowledge (SACK) that -+ * results in lost data never being retransmitted. -+ * Disable it by default now, but adds a module parameter to enable it for -+ * debug purposes (the full cause is not currently understood). -+ */ -+static bool enable_tso; -+module_param(enable_tso, bool, 0644); -+MODULE_PARM_DESC(enable_tso, "Enables TCP segmentation offload"); -+ - static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data) - { - u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL); -@@ -3011,8 +3020,14 @@ static int lan78xx_bind(struct lan78xx_n - if (DEFAULT_RX_CSUM_ENABLE) - dev->net->features |= NETIF_F_RXCSUM; - -- if (DEFAULT_TSO_CSUM_ENABLE) -- dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG; -+ if (DEFAULT_TSO_CSUM_ENABLE) { -+ dev->net->features |= NETIF_F_SG; -+ /* Use module parameter to control TCP segmentation offload as -+ * it appears to cause issues. -+ */ -+ if (enable_tso) -+ dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6; -+ } - - if (DEFAULT_VLAN_RX_OFFLOAD) - dev->net->features |= NETIF_F_HW_VLAN_CTAG_RX; diff --git a/target/linux/brcm2708/patches-4.19/950-0135-bcm2835-interpolate-audio-delay.patch b/target/linux/brcm2708/patches-4.19/950-0135-bcm2835-interpolate-audio-delay.patch new file mode 100644 index 0000000000..55cd26b25b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0135-bcm2835-interpolate-audio-delay.patch @@ -0,0 +1,89 @@ +From 652b0ec2ab2d2e2af7bb4f7d62a4020a20720677 Mon Sep 17 00:00:00 2001 +From: wm4 +Date: Wed, 13 Jan 2016 19:44:47 +0100 +Subject: [PATCH] bcm2835: interpolate audio delay + +It appears the GPU only sends us a message all 10ms to update +the playback progress. Other than this, the playback position +(what SNDRV_PCM_IOCTL_DELAY will return) is not updated at all. +Userspace will see jitter up to 10ms in the audio position. + +Make this a bit nicer for userspace by interpolating the +position using the CPU clock. + +I'm not sure if setting snd_pcm_runtime.delay is the right +approach for this. Or if there is maybe an already existing +mechanism for position interpolation in the ALSA core. + +I only set SNDRV_PCM_INFO_BATCH because this appears to remove +at least one situation snd_pcm_runtime.delay is used, so I have +to worry less in which place I have to update this field, or +how it interacts with the rest of ALSA. + +In the future, it might be nice to use VC_AUDIO_MSG_TYPE_LATENCY. +One problem is that it requires sending a videocore message, and +waiting for a reply, which could make the implementation much +harder due to locking and synchronization requirements. +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 12 +++++++++++- + .../staging/vc04_services/bcm2835-audio/bcm2835.h | 1 + + 2 files changed, 12 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -11,7 +11,7 @@ + /* hardware definition */ + static const struct snd_pcm_hardware snd_bcm2835_playback_hw = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | +- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), ++ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_BATCH), + .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, + .rate_min = 8000, +@@ -81,6 +81,8 @@ void bcm2835_playback_fifo(struct bcm283 + alsa_stream->pos %= alsa_stream->buffer_size; + } + ++ alsa_stream->interpolate_start = ktime_get_ns(); ++ + if (alsa_stream->substream) { + if (new_period) + snd_pcm_period_elapsed(alsa_stream->substream); +@@ -306,6 +308,7 @@ static int snd_bcm2835_pcm_prepare(struc + alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); + alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); + alsa_stream->pos = 0; ++ alsa_stream->interpolate_start = ktime_get_ns(); + + audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", + alsa_stream->buffer_size, alsa_stream->period_size, +@@ -397,12 +400,19 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s + { + struct snd_pcm_runtime *runtime = substream->runtime; + struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; ++ u64 now = ktime_get_ns(); + + audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, + frames_to_bytes(runtime, runtime->status->hw_ptr), + frames_to_bytes(runtime, runtime->control->appl_ptr), + alsa_stream->pos); + ++ /* Give userspace better delay reporting by interpolating between GPU ++ * notifications, assuming audio speed is close enough to the clock ++ * used for ktime */ ++ if (alsa_stream->interpolate_start && alsa_stream->interpolate_start < now) ++ runtime->delay = -(int)div_u64((now - alsa_stream->interpolate_start) * runtime->rate, 1000000000); ++ + return snd_pcm_indirect_playback_pointer(substream, + &alsa_stream->pcm_indirect, + alsa_stream->pos); +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -133,6 +133,7 @@ struct bcm2835_alsa_stream { + unsigned int pos; + unsigned int buffer_size; + unsigned int period_size; ++ u64 interpolate_start; + + atomic_t retrieved; + struct bcm2835_audio_instance *instance; diff --git a/target/linux/brcm2708/patches-4.19/950-0136-lan78xx-Move-enabling-of-EEE-into-PHY-init-code.patch b/target/linux/brcm2708/patches-4.19/950-0136-lan78xx-Move-enabling-of-EEE-into-PHY-init-code.patch deleted file mode 100644 index 0d9f8b6569..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0136-lan78xx-Move-enabling-of-EEE-into-PHY-init-code.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 75ec78040e02200dfc2ad4e35c289086334fbee2 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 5 Apr 2018 14:46:11 +0100 -Subject: [PATCH 136/806] lan78xx: Move enabling of EEE into PHY init code - -Enable EEE mode as soon as possible after connecting to the PHY, and -before phy_start. This avoids a second link negotiation, which speeds -up booting and stops the interface failing to become ready. - -See: https://github.com/raspberrypi/linux/issues/2437 - -Signed-off-by: Phil Elwell ---- - drivers/net/usb/lan78xx.c | 32 ++++++++++++++++---------------- - 1 file changed, 16 insertions(+), 16 deletions(-) - ---- a/drivers/net/usb/lan78xx.c -+++ b/drivers/net/usb/lan78xx.c -@@ -2189,6 +2189,22 @@ static int lan78xx_phy_init(struct lan78 - mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control); - phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv); - -+ if (of_property_read_bool(dev->udev->dev.of_node, -+ "microchip,eee-enabled")) { -+ struct ethtool_eee edata; -+ memset(&edata, 0, sizeof(edata)); -+ edata.cmd = ETHTOOL_SEEE; -+ edata.advertised = ADVERTISED_1000baseT_Full | -+ ADVERTISED_100baseT_Full; -+ edata.eee_enabled = true; -+ edata.tx_lpi_enabled = true; -+ if (of_property_read_u32(dev->udev->dev.of_node, -+ "microchip,tx-lpi-timer", -+ &edata.tx_lpi_timer)) -+ edata.tx_lpi_timer = 600; /* non-aggressive */ -+ (void)lan78xx_set_eee(dev->net, &edata); -+ } -+ - if (phydev->mdio.dev.of_node) { - u32 reg; - int len; -@@ -2666,22 +2682,6 @@ static int lan78xx_open(struct net_devic - - netif_dbg(dev, ifup, dev->net, "phy initialised successfully"); - -- if (of_property_read_bool(dev->udev->dev.of_node, -- "microchip,eee-enabled")) { -- struct ethtool_eee edata; -- memset(&edata, 0, sizeof(edata)); -- edata.cmd = ETHTOOL_SEEE; -- edata.advertised = ADVERTISED_1000baseT_Full | -- ADVERTISED_100baseT_Full; -- edata.eee_enabled = true; -- edata.tx_lpi_enabled = true; -- if (of_property_read_u32(dev->udev->dev.of_node, -- "microchip,tx-lpi-timer", -- &edata.tx_lpi_timer)) -- edata.tx_lpi_timer = 600; /* non-aggressive */ -- (void)lan78xx_set_eee(net, &edata); -- } -- - /* for Link Check */ - if (dev->urb_intr) { - ret = usb_submit_urb(dev->urb_intr, GFP_KERNEL); diff --git a/target/linux/brcm2708/patches-4.19/950-0136-vchiq_2835_arm-Implement-a-DMA-pool-for-small-bulk-t.patch b/target/linux/brcm2708/patches-4.19/950-0136-vchiq_2835_arm-Implement-a-DMA-pool-for-small-bulk-t.patch new file mode 100644 index 0000000000..e6836b5066 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0136-vchiq_2835_arm-Implement-a-DMA-pool-for-small-bulk-t.patch @@ -0,0 +1,126 @@ +From 75fdebcf15e8023b9640d9fc2e3ed227e5563968 Mon Sep 17 00:00:00 2001 +From: detule +Date: Tue, 2 Oct 2018 04:10:08 -0400 +Subject: [PATCH] vchiq_2835_arm: Implement a DMA pool for small bulk + transfers (#2699) + +During a bulk transfer we request a DMA allocation to hold the +scatter-gather list. Most of the time, this allocation is small +(<< PAGE_SIZE), however it can be requested at a high enough frequency +to cause fragmentation and/or stress the CMA allocator (think time +spent in compaction here, or during allocations elsewhere). + +Implement a pool to serve up small DMA allocations, falling back +to a coherent allocation if the request is greater than +VCHIQ_DMA_POOL_SIZE. + +Signed-off-by: Oliver Gjoneski +--- + .../interface/vchiq_arm/vchiq_2835_arm.c | 40 +++++++++++++++---- + 1 file changed, 33 insertions(+), 7 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +@@ -37,6 +37,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -60,6 +61,8 @@ + #define BELL0 0x00 + #define BELL2 0x08 + ++#define VCHIQ_DMA_POOL_SIZE PAGE_SIZE ++ + struct vchiq_2835_state { + int inited; + VCHIQ_ARM_STATE_T arm_state; +@@ -69,6 +72,7 @@ struct vchiq_pagelist_info { + PAGELIST_T *pagelist; + size_t pagelist_buffer_size; + dma_addr_t dma_addr; ++ bool is_from_pool; + enum dma_data_direction dma_dir; + unsigned int num_pages; + unsigned int pages_need_release; +@@ -91,6 +95,7 @@ static void __iomem *g_regs; + * relevant Device Tree node. + */ + static unsigned int g_cache_line_size; ++static struct dma_pool *g_dma_pool; + static unsigned int g_fragments_size; + static char *g_fragments_base; + static char *g_free_fragments; +@@ -206,6 +211,14 @@ int vchiq_platform_init(struct platform_ + } + + g_dev = dev; ++ g_dma_pool = dmam_pool_create("vchiq_scatter_pool", dev, ++ VCHIQ_DMA_POOL_SIZE, g_cache_line_size, ++ 0); ++ if (!g_dma_pool) { ++ dev_err(dev, "failed to create dma pool"); ++ return -ENOMEM; ++ } ++ + vchiq_log_info(vchiq_arm_log_level, + "vchiq_init - done (slots %pK, phys %pad)", + vchiq_slot_zero, &slot_phys); +@@ -397,9 +410,14 @@ cleanup_pagelistinfo(struct vchiq_pageli + for (i = 0; i < pagelistinfo->num_pages; i++) + put_page(pagelistinfo->pages[i]); + } +- +- dma_free_coherent(g_dev, pagelistinfo->pagelist_buffer_size, +- pagelistinfo->pagelist, pagelistinfo->dma_addr); ++ if (pagelistinfo->is_from_pool) { ++ dma_pool_free(g_dma_pool, pagelistinfo->pagelist, ++ pagelistinfo->dma_addr); ++ } else { ++ dma_free_coherent(g_dev, pagelistinfo->pagelist_buffer_size, ++ pagelistinfo->pagelist, ++ pagelistinfo->dma_addr); ++ } + } + + /* There is a potential problem with partial cache lines (pages?) +@@ -419,6 +437,7 @@ create_pagelist(char __user *buf, size_t + u32 *addrs; + unsigned int num_pages, offset, i, k; + int actual_pages; ++ bool is_from_pool; + size_t pagelist_size; + struct scatterlist *scatterlist, *sg; + int dma_buffers; +@@ -445,10 +464,16 @@ create_pagelist(char __user *buf, size_t + /* Allocate enough storage to hold the page pointers and the page + * list + */ +- pagelist = dma_zalloc_coherent(g_dev, +- pagelist_size, +- &dma_addr, +- GFP_KERNEL); ++ if (pagelist_size > VCHIQ_DMA_POOL_SIZE) { ++ pagelist = dma_zalloc_coherent(g_dev, ++ pagelist_size, ++ &dma_addr, ++ GFP_KERNEL); ++ is_from_pool = false; ++ } else { ++ pagelist = dma_pool_zalloc(g_dma_pool, GFP_KERNEL, &dma_addr); ++ is_from_pool = true; ++ } + + vchiq_log_trace(vchiq_arm_log_level, "%s - %pK", __func__, pagelist); + +@@ -469,6 +494,7 @@ create_pagelist(char __user *buf, size_t + pagelistinfo->pagelist = pagelist; + pagelistinfo->pagelist_buffer_size = pagelist_size; + pagelistinfo->dma_addr = dma_addr; ++ pagelistinfo->is_from_pool = is_from_pool; + pagelistinfo->dma_dir = (type == PAGELIST_WRITE) ? + DMA_TO_DEVICE : DMA_FROM_DEVICE; + pagelistinfo->num_pages = num_pages; diff --git a/target/linux/brcm2708/patches-4.19/950-0137-BCM2708_DT-Use-upstreamed-GPIO-expander-driver.patch b/target/linux/brcm2708/patches-4.19/950-0137-BCM2708_DT-Use-upstreamed-GPIO-expander-driver.patch new file mode 100644 index 0000000000..3fcd3d9344 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0137-BCM2708_DT-Use-upstreamed-GPIO-expander-driver.patch @@ -0,0 +1,50 @@ +From b44b364b2762579776addb7371f71b77fce62eb8 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 8 Oct 2018 12:20:36 +0100 +Subject: [PATCH] BCM2708_DT: Use upstreamed GPIO expander driver + +The upstreamed driver for the GPIO expander has a different compatible +string. Change the relevant Device Tree files to match. + +See: https://github.com/raspberrypi/linux/issues/2704 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 2 +- + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 2 +- + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 2 +- + 3 files changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts +@@ -84,7 +84,7 @@ + + &soc { + expgpio: expgpio { +- compatible = "brcm,bcm2835-expgpio"; ++ compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + firmware = <&firmware>; +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -92,7 +92,7 @@ + }; + + expgpio: expgpio { +- compatible = "brcm,bcm2835-expgpio"; ++ compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + firmware = <&firmware>; +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -52,7 +52,7 @@ + }; + + expgpio: expgpio { +- compatible = "brcm,bcm2835-expgpio"; ++ compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + firmware = <&firmware>; diff --git a/target/linux/brcm2708/patches-4.19/950-0137-staging-vc04_services-Derive-g_cache_line_size.patch b/target/linux/brcm2708/patches-4.19/950-0137-staging-vc04_services-Derive-g_cache_line_size.patch deleted file mode 100644 index c611322b8a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0137-staging-vc04_services-Derive-g_cache_line_size.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 6bc13b1a867a5fd769f2be713ce9c9d863534bff Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 28 Aug 2018 10:40:40 +0100 -Subject: [PATCH 137/806] staging/vc04_services: Derive g_cache_line_size - -The ARM coprocessor registers include dcache line size, but there is no -function to expose this value. Rather than create a new one, use the -read_cpuid_id function to derive the correct value, which is 32 for -BCM2835 and 64 for BCM2836/7. - -Signed-off-by: Phil Elwell ---- - .../interface/vchiq_arm/vchiq_2835_arm.c | 24 +++++++++++++++---- - 1 file changed, 19 insertions(+), 5 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -@@ -42,6 +42,7 @@ - #include - #include - #include -+#include - #include - - #define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32) -@@ -81,13 +82,15 @@ static void __iomem *g_regs; - * VPU firmware, which determines the required alignment of the - * offsets/sizes in pagelists. - * -- * Modern VPU firmware looks for a DT "cache-line-size" property in -- * the VCHIQ node and will overwrite it with the actual L2 cache size, -+ * Previous VPU firmware looked for a DT "cache-line-size" property in -+ * the VCHIQ node and would overwrite it with the actual L2 cache size, - * which the kernel must then respect. That property was rejected -- * upstream, so we have to use the VPU firmware's compatibility value -- * of 32. -+ * upstream, so we now rely on both sides to "do the right thing" independently -+ * of the other. To improve backwards compatibility, this new behaviour is -+ * signalled to the firmware by the use of a corrected "reg" property on the -+ * relevant Device Tree node. - */ --static unsigned int g_cache_line_size = 32; -+static unsigned int g_cache_line_size; - static unsigned int g_fragments_size; - static char *g_fragments_base; - static char *g_free_fragments; -@@ -127,6 +130,17 @@ int vchiq_platform_init(struct platform_ - if (err < 0) - return err; - -+ /* -+ * The tempting L1_CACHE_BYTES macro doesn't work in the case of -+ * a kernel built with bcm2835_defconfig running on a BCM2836/7 -+ * processor, hence the need for a runtime check. The dcache line size -+ * is encoded in one of the coprocessor registers, but there is no -+ * convenient way to access it short of embedded assembler, hence -+ * the use of read_cpuid_id(). The following test evaluates to true -+ * on a BCM2835 showing that it is ARMv6-ish, whereas -+ * cpu_architecture() will indicate that it is an ARMv7. -+ */ -+ g_cache_line_size = ((read_cpuid_id() & 0x7f000) == 0x7b000) ? 32 : 64; - g_fragments_size = 2 * g_cache_line_size; - - /* Allocate space for the channels in coherent memory */ diff --git a/target/linux/brcm2708/patches-4.19/950-0138-Add-rpi-poe-fan-driver.patch b/target/linux/brcm2708/patches-4.19/950-0138-Add-rpi-poe-fan-driver.patch deleted file mode 100644 index c007b25389..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0138-Add-rpi-poe-fan-driver.patch +++ /dev/null @@ -1,682 +0,0 @@ -From e6528f67b96f52ea77d95a59e75d8270bb53aade Mon Sep 17 00:00:00 2001 -From: Serge Schneider -Date: Mon, 9 Jul 2018 12:54:25 +0100 -Subject: [PATCH 138/806] Add rpi-poe-fan driver - -Signed-off-by: Serge Schneider - -PoE HAT driver cleanup - -* Fix undeclared variable in rpi_poe_fan_suspend -* Add SPDX-License-Identifier -* Expand PoE acronym in Kconfig help -* Give clearer error message on of_property_count_u32_elems fail -* Add documentation -* Add vendor to of_device_id compatible string. -* Rename m_data_s struct to fw_data_s -* Fix typos - -Fixes: #2665 - -Signed-off-by: Serge Schneider ---- - .../devicetree/bindings/hwmon/rpi-poe-fan.txt | 55 +++ - Documentation/hwmon/rpi-poe-fan | 15 + - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 + - .../arm/boot/dts/overlays/rpi-poe-overlay.dts | 61 +++ - drivers/hwmon/Kconfig | 11 + - drivers/hwmon/Makefile | 1 + - drivers/hwmon/rpi-poe-fan.c | 436 ++++++++++++++++++ - include/soc/bcm2835/raspberrypi-firmware.h | 2 + - 11 files changed, 590 insertions(+) - create mode 100644 Documentation/devicetree/bindings/hwmon/rpi-poe-fan.txt - create mode 100644 Documentation/hwmon/rpi-poe-fan - create mode 100644 arch/arm/boot/dts/overlays/rpi-poe-overlay.dts - create mode 100644 drivers/hwmon/rpi-poe-fan.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/hwmon/rpi-poe-fan.txt -@@ -0,0 +1,55 @@ -+Bindings for the Raspberry Pi PoE HAT fan -+ -+Required properties: -+- compatible : "raspberrypi,rpi-poe-fan" -+- firmware : Reference to the RPi firmware device node -+- pwms : the PWM that is used to control the PWM fan -+- cooling-levels : PWM duty cycle values in a range from 0 to 255 -+ which correspond to thermal cooling states -+ -+Example: -+ fan0: rpi-poe-fan@0 { -+ compatible = "raspberrypi,rpi-poe-fan"; -+ firmware = <&firmware>; -+ cooling-min-state = <0>; -+ cooling-max-state = <3>; -+ #cooling-cells = <2>; -+ cooling-levels = <0 50 150 255>; -+ status = "okay"; -+ }; -+ -+ thermal-zones { -+ cpu_thermal: cpu-thermal { -+ trips { -+ threshold: trip-point@0 { -+ temperature = <45000>; -+ hysteresis = <5000>; -+ type = "active"; -+ }; -+ target: trip-point@1 { -+ temperature = <50000>; -+ hysteresis = <2000>; -+ type = "active"; -+ }; -+ cpu_hot: cpu_hot@0 { -+ temperature = <55000>; -+ hysteresis = <2000>; -+ type = "active"; -+ }; -+ }; -+ cooling-maps { -+ map0 { -+ trip = <&threshold>; -+ cooling-device = <&fan0 0 1>; -+ }; -+ map1 { -+ trip = <&target>; -+ cooling-device = <&fan0 1 2>; -+ }; -+ map2 { -+ trip = <&cpu_hot>; -+ cooling-device = <&fan0 2 3>; -+ }; -+ }; -+ }; -+ }; ---- /dev/null -+++ b/Documentation/hwmon/rpi-poe-fan -@@ -0,0 +1,15 @@ -+Kernel driver rpi-poe-fan -+===================== -+ -+This driver enables the use of the Raspberry Pi PoE HAT fan. -+ -+Author: Serge Schneider -+ -+Description -+----------- -+ -+The driver implements a simple interface for driving the Raspberry Pi PoE -+(Power over Ethernet) HAT fan. The driver passes commands to the Raspberry Pi -+firmware through the mailbox property interface. The firmware then forwards -+the commands to the board over I2C on the ID_EEPROM pins. The driver exposes -+the fan to the user space through the hwmon sysfs interface. ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -100,6 +100,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - rpi-dac.dtbo \ - rpi-display.dtbo \ - rpi-ft5406.dtbo \ -+ rpi-poe.dtbo \ - rpi-proto.dtbo \ - rpi-sense.dtbo \ - rpi-tv.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1515,6 +1515,12 @@ Params: touchscreen-size-x Touchscr - touchscreen-swapped-x-y Swap X and Y cordinates (default 0); - - -+Name: rpi-poe -+Info: Raspberry Pi POE HAT -+Load: dtoverlay=rpi-poe -+Params: -+ -+ - Name: rpi-proto - Info: Configures the RPi Proto audio card - Load: dtoverlay=rpi-proto ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -@@ -0,0 +1,61 @@ -+/* -+ * Overlay for the Raspberry Pi POE HAT. -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ fan0: rpi-poe-fan@0 { -+ compatible = "raspberrypi,rpi-poe-fan"; -+ firmware = <&firmware>; -+ cooling-min-state = <0>; -+ cooling-max-state = <3>; -+ #cooling-cells = <2>; -+ cooling-levels = <0 50 150 255>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&cpu_thermal>; -+ __overlay__ { -+ trips { -+ threshold: trip-point@0 { -+ temperature = <45000>; -+ hysteresis = <5000>; -+ type = "active"; -+ }; -+ target: trip-point@1 { -+ temperature = <50000>; -+ hysteresis = <2000>; -+ type = "active"; -+ }; -+ cpu_hot: cpu_hot@0 { -+ temperature = <55000>; -+ hysteresis = <2000>; -+ type = "active"; -+ }; -+ }; -+ cooling-maps { -+ map0 { -+ trip = <&threshold>; -+ cooling-device = <&fan0 0 1>; -+ }; -+ map1 { -+ trip = <&target>; -+ cooling-device = <&fan0 1 2>; -+ }; -+ map2 { -+ trip = <&cpu_hot>; -+ cooling-device = <&fan0 2 3>; -+ }; -+ }; -+ }; -+ }; -+}; ---- a/drivers/hwmon/Kconfig -+++ b/drivers/hwmon/Kconfig -@@ -1330,6 +1330,17 @@ config SENSORS_RASPBERRYPI_HWMON - This driver can also be built as a module. If so, the module - will be called raspberrypi-hwmon. - -+config SENSORS_RPI_POE_FAN -+ tristate "Raspberry Pi PoE HAT fan" -+ depends on RASPBERRYPI_FIRMWARE -+ depends on THERMAL || THERMAL=n -+ help -+ If you say yes here you get support for Raspberry Pi PoE (Power over -+ Ethernet) HAT fan. -+ -+ This driver can also be built as a module. If so, the module -+ will be called rpi-poe-fan. -+ - config SENSORS_SHT15 - tristate "Sensiron humidity and temperature sensors. SHT15 and compat." - depends on GPIOLIB || COMPILE_TEST ---- a/drivers/hwmon/Makefile -+++ b/drivers/hwmon/Makefile -@@ -144,6 +144,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591 - obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o - obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o - obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o -+obj-$(CONFIG_SENSORS_RPI_POE_FAN) += rpi-poe-fan.o - obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o - obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o - obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o ---- /dev/null -+++ b/drivers/hwmon/rpi-poe-fan.c -@@ -0,0 +1,436 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * rpi-poe-fan.c - Hwmon driver for Raspberry Pi PoE HAT fan. -+ * -+ * Copyright (C) 2018 Raspberry Pi (Trading) Ltd. -+ * Based on pwm-fan.c by Kamil Debski -+ * -+ * Author: Serge Schneider -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MAX_PWM 255 -+ -+#define POE_CUR_PWM 0x0 -+#define POE_DEF_PWM 0x1 -+ -+struct rpi_poe_fan_ctx { -+ struct mutex lock; -+ struct rpi_firmware *fw; -+ unsigned int pwm_value; -+ unsigned int def_pwm_value; -+ unsigned int rpi_poe_fan_state; -+ unsigned int rpi_poe_fan_max_state; -+ unsigned int *rpi_poe_fan_cooling_levels; -+ struct thermal_cooling_device *cdev; -+ struct notifier_block nb; -+}; -+ -+struct fw_tag_data_s{ -+ u32 reg; -+ u32 val; -+ u32 ret; -+}; -+ -+static int write_reg(struct rpi_firmware *fw, u32 reg, u32 *val){ -+ struct fw_tag_data_s fw_tag_data = { -+ .reg = reg, -+ .val = *val -+ }; -+ int ret; -+ ret = rpi_firmware_property(fw, RPI_FIRMWARE_SET_POE_HAT_VAL, -+ &fw_tag_data, sizeof(fw_tag_data)); -+ if (ret) { -+ return ret; -+ } else if (fw_tag_data.ret) { -+ return -EIO; -+ } -+ return 0; -+} -+ -+static int read_reg(struct rpi_firmware *fw, u32 reg, u32 *val){ -+ struct fw_tag_data_s fw_tag_data = { -+ .reg = reg, -+ }; -+ int ret; -+ ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_POE_HAT_VAL, -+ &fw_tag_data, sizeof(fw_tag_data)); -+ if (ret) { -+ return ret; -+ } else if (fw_tag_data.ret) { -+ return -EIO; -+ } -+ *val = fw_tag_data.val; -+ return 0; -+} -+ -+static int rpi_poe_reboot(struct notifier_block *nb, unsigned long code, -+ void *unused) -+{ -+ struct rpi_poe_fan_ctx *ctx = container_of(nb, struct rpi_poe_fan_ctx, -+ nb); -+ -+ if (ctx->pwm_value != ctx->def_pwm_value) -+ write_reg(ctx->fw, POE_CUR_PWM, &ctx->def_pwm_value); -+ -+ return NOTIFY_DONE; -+} -+ -+static int __set_pwm(struct rpi_poe_fan_ctx *ctx, u32 pwm) -+{ -+ int ret = 0; -+ -+ mutex_lock(&ctx->lock); -+ if (ctx->pwm_value == pwm) -+ goto exit_set_pwm_err; -+ -+ ret = write_reg(ctx->fw, POE_CUR_PWM, &pwm); -+ if (!ret) -+ ctx->pwm_value = pwm; -+exit_set_pwm_err: -+ mutex_unlock(&ctx->lock); -+ return ret; -+} -+ -+static int __set_def_pwm(struct rpi_poe_fan_ctx *ctx, u32 def_pwm) -+{ -+ int ret = 0; -+ mutex_lock(&ctx->lock); -+ if (ctx->def_pwm_value == def_pwm) -+ goto exit_set_def_pwm_err; -+ -+ ret = write_reg(ctx->fw, POE_CUR_PWM, &def_pwm); -+ if (!ret) -+ ctx->def_pwm_value = def_pwm; -+exit_set_def_pwm_err: -+ mutex_unlock(&ctx->lock); -+ return ret; -+} -+ -+static void rpi_poe_fan_update_state(struct rpi_poe_fan_ctx *ctx, -+ unsigned long pwm) -+{ -+ int i; -+ -+ for (i = 0; i < ctx->rpi_poe_fan_max_state; ++i) -+ if (pwm < ctx->rpi_poe_fan_cooling_levels[i + 1]) -+ break; -+ -+ ctx->rpi_poe_fan_state = i; -+} -+ -+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); -+ unsigned long pwm; -+ int ret; -+ -+ if (kstrtoul(buf, 10, &pwm) || pwm > MAX_PWM) -+ return -EINVAL; -+ -+ ret = __set_pwm(ctx, pwm); -+ if (ret) -+ return ret; -+ -+ rpi_poe_fan_update_state(ctx, pwm); -+ return count; -+} -+ -+static ssize_t set_def_pwm(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); -+ unsigned long def_pwm; -+ int ret; -+ -+ if (kstrtoul(buf, 10, &def_pwm) || def_pwm > MAX_PWM) -+ return -EINVAL; -+ -+ ret = __set_def_pwm(ctx, def_pwm); -+ if (ret) -+ return ret; -+ return count; -+} -+ -+static ssize_t show_pwm(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); -+ -+ return sprintf(buf, "%u\n", ctx->pwm_value); -+} -+ -+static ssize_t show_def_pwm(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); -+ -+ return sprintf(buf, "%u\n", ctx->def_pwm_value); -+} -+ -+ -+static SENSOR_DEVICE_ATTR(pwm1, 0644, show_pwm, set_pwm, 0); -+static SENSOR_DEVICE_ATTR(def_pwm1, 0644, show_def_pwm, set_def_pwm, 1); -+ -+static struct attribute *rpi_poe_fan_attrs[] = { -+ &sensor_dev_attr_pwm1.dev_attr.attr, -+ &sensor_dev_attr_def_pwm1.dev_attr.attr, -+ NULL, -+}; -+ -+ATTRIBUTE_GROUPS(rpi_poe_fan); -+ -+/* thermal cooling device callbacks */ -+static int rpi_poe_fan_get_max_state(struct thermal_cooling_device *cdev, -+ unsigned long *state) -+{ -+ struct rpi_poe_fan_ctx *ctx = cdev->devdata; -+ -+ if (!ctx) -+ return -EINVAL; -+ -+ *state = ctx->rpi_poe_fan_max_state; -+ -+ return 0; -+} -+ -+static int rpi_poe_fan_get_cur_state(struct thermal_cooling_device *cdev, -+ unsigned long *state) -+{ -+ struct rpi_poe_fan_ctx *ctx = cdev->devdata; -+ -+ if (!ctx) -+ return -EINVAL; -+ -+ *state = ctx->rpi_poe_fan_state; -+ -+ return 0; -+} -+ -+static int rpi_poe_fan_set_cur_state(struct thermal_cooling_device *cdev, -+ unsigned long state) -+{ -+ struct rpi_poe_fan_ctx *ctx = cdev->devdata; -+ int ret; -+ -+ if (!ctx || (state > ctx->rpi_poe_fan_max_state)) -+ return -EINVAL; -+ -+ if (state == ctx->rpi_poe_fan_state) -+ return 0; -+ -+ ret = __set_pwm(ctx, ctx->rpi_poe_fan_cooling_levels[state]); -+ if (ret) { -+ dev_err(&cdev->device, "Cannot set pwm!\n"); -+ return ret; -+ } -+ -+ ctx->rpi_poe_fan_state = state; -+ -+ return ret; -+} -+ -+static const struct thermal_cooling_device_ops rpi_poe_fan_cooling_ops = { -+ .get_max_state = rpi_poe_fan_get_max_state, -+ .get_cur_state = rpi_poe_fan_get_cur_state, -+ .set_cur_state = rpi_poe_fan_set_cur_state, -+}; -+ -+static int rpi_poe_fan_of_get_cooling_data(struct device *dev, -+ struct rpi_poe_fan_ctx *ctx) -+{ -+ struct device_node *np = dev->of_node; -+ int num, i, ret; -+ -+ if (!of_find_property(np, "cooling-levels", NULL)) -+ return 0; -+ -+ ret = of_property_count_u32_elems(np, "cooling-levels"); -+ if (ret <= 0) { -+ dev_err(dev, "cooling-levels property missing or invalid: %d\n", -+ ret); -+ return ret ? : -EINVAL; -+ } -+ -+ num = ret; -+ ctx->rpi_poe_fan_cooling_levels = devm_kzalloc(dev, num * sizeof(u32), -+ GFP_KERNEL); -+ if (!ctx->rpi_poe_fan_cooling_levels) -+ return -ENOMEM; -+ -+ ret = of_property_read_u32_array(np, "cooling-levels", -+ ctx->rpi_poe_fan_cooling_levels, num); -+ if (ret) { -+ dev_err(dev, "Property 'cooling-levels' cannot be read!\n"); -+ return ret; -+ } -+ -+ for (i = 0; i < num; i++) { -+ if (ctx->rpi_poe_fan_cooling_levels[i] > MAX_PWM) { -+ dev_err(dev, "PWM fan state[%d]:%d > %d\n", i, -+ ctx->rpi_poe_fan_cooling_levels[i], MAX_PWM); -+ return -EINVAL; -+ } -+ } -+ -+ ctx->rpi_poe_fan_max_state = num - 1; -+ -+ return 0; -+} -+ -+static int rpi_poe_fan_probe(struct platform_device *pdev) -+{ -+ struct thermal_cooling_device *cdev; -+ struct rpi_poe_fan_ctx *ctx; -+ struct device *hwmon; -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *fw_node; -+ int ret; -+ -+ fw_node = of_parse_phandle(np, "firmware", 0); -+ if (!fw_node) { -+ dev_err(&pdev->dev, "Missing firmware node\n"); -+ return -ENOENT; -+ } -+ -+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); -+ if (!ctx) -+ return -ENOMEM; -+ -+ mutex_init(&ctx->lock); -+ -+ ctx->fw = rpi_firmware_get(fw_node); -+ if (!ctx->fw) -+ return -EPROBE_DEFER; -+ -+ platform_set_drvdata(pdev, ctx); -+ -+ ctx->nb.notifier_call = rpi_poe_reboot; -+ ret = register_reboot_notifier(&ctx->nb); -+ if (ret) { -+ dev_err(&pdev->dev, "Failed to register reboot notifier: %i\n", -+ ret); -+ return ret; -+ } -+ ret = read_reg(ctx->fw, POE_DEF_PWM, &ctx->def_pwm_value); -+ if (ret) { -+ dev_err(&pdev->dev, "Failed to get default PWM value: %i\n", -+ ret); -+ goto err; -+ } -+ ret = read_reg(ctx->fw, POE_CUR_PWM, &ctx->pwm_value); -+ if (ret) { -+ dev_err(&pdev->dev, "Failed to get current PWM value: %i\n", -+ ret); -+ goto err; -+ } -+ -+ hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "rpipoefan", -+ ctx, rpi_poe_fan_groups); -+ if (IS_ERR(hwmon)) { -+ dev_err(&pdev->dev, "Failed to register hwmon device\n"); -+ ret = PTR_ERR(hwmon); -+ goto err; -+ } -+ -+ ret = rpi_poe_fan_of_get_cooling_data(&pdev->dev, ctx); -+ if (ret) -+ return ret; -+ -+ rpi_poe_fan_update_state(ctx, ctx->pwm_value); -+ if (!IS_ENABLED(CONFIG_THERMAL)) -+ return 0; -+ -+ cdev = thermal_of_cooling_device_register(np, -+ "rpi-poe-fan", ctx, -+ &rpi_poe_fan_cooling_ops); -+ if (IS_ERR(cdev)) { -+ dev_err(&pdev->dev, -+ "Failed to register rpi-poe-fan as cooling device"); -+ ret = PTR_ERR(cdev); -+ goto err; -+ } -+ ctx->cdev = cdev; -+ thermal_cdev_update(cdev); -+ -+ return 0; -+err: -+ unregister_reboot_notifier(&ctx->nb); -+ return ret; -+} -+ -+static int rpi_poe_fan_remove(struct platform_device *pdev) -+{ -+ struct rpi_poe_fan_ctx *ctx = platform_get_drvdata(pdev); -+ u32 value = ctx->def_pwm_value; -+ -+ unregister_reboot_notifier(&ctx->nb); -+ thermal_cooling_device_unregister(ctx->cdev); -+ if (ctx->pwm_value != value) { -+ write_reg(ctx->fw, POE_CUR_PWM, &value); -+ } -+ return 0; -+} -+ -+#ifdef CONFIG_PM_SLEEP -+static int rpi_poe_fan_suspend(struct device *dev) -+{ -+ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); -+ u32 value = 0; -+ int ret = 0; -+ -+ if (ctx->pwm_value != value) -+ ret = write_reg(ctx->fw, POE_CUR_PWM, &value); -+ return ret; -+} -+ -+static int rpi_poe_fan_resume(struct device *dev) -+{ -+ struct rpi_poe_fan_ctx *ctx = dev_get_drvdata(dev); -+ u32 value = ctx->pwm_value; -+ int ret = 0; -+ -+ if (value != 0) -+ ret = write_reg(ctx->fw, POE_CUR_PWM, &value); -+ -+ return ret; -+} -+#endif -+ -+static SIMPLE_DEV_PM_OPS(rpi_poe_fan_pm, rpi_poe_fan_suspend, -+ rpi_poe_fan_resume); -+ -+static const struct of_device_id of_rpi_poe_fan_match[] = { -+ { .compatible = "raspberrypi,rpi-poe-fan", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, of_rpi_poe_fan_match); -+ -+static struct platform_driver rpi_poe_fan_driver = { -+ .probe = rpi_poe_fan_probe, -+ .remove = rpi_poe_fan_remove, -+ .driver = { -+ .name = "rpi-poe-fan", -+ .pm = &rpi_poe_fan_pm, -+ .of_match_table = of_rpi_poe_fan_match, -+ }, -+}; -+ -+module_platform_driver(rpi_poe_fan_driver); -+ -+MODULE_AUTHOR("Serge Schneider "); -+MODULE_ALIAS("platform:rpi-poe-fan"); -+MODULE_DESCRIPTION("Raspberry Pi PoE HAT fan driver"); -+MODULE_LICENSE("GPL"); ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -93,6 +93,8 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043, - RPI_FIRMWARE_GET_PERIPH_REG = 0x00030045, - RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, -+ RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049, -+ RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050, - - - /* Dispmanx TAGS */ diff --git a/target/linux/brcm2708/patches-4.19/950-0138-overlays-Fix-a-few-dtc-warnings.patch b/target/linux/brcm2708/patches-4.19/950-0138-overlays-Fix-a-few-dtc-warnings.patch new file mode 100644 index 0000000000..b4c4f5aab4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0138-overlays-Fix-a-few-dtc-warnings.patch @@ -0,0 +1,179 @@ +From 13abcbfdc76f1a40c36367fe28b76e29742b2d05 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 8 Oct 2018 17:16:28 +0100 +Subject: [PATCH] overlays: Fix a few dtc warnings + +Signed-off-by: Phil Elwell +--- + .../overlays/pitft28-resistive-overlay.dts | 2 -- + .../overlays/pitft35-resistive-overlay.dts | 2 -- + .../arm/boot/dts/overlays/qca7000-overlay.dts | 13 ++++++---- + .../overlays/rpi-cirrus-wm5102-overlay.dts | 26 ++++++++++++------- + arch/arm/boot/dts/overlays/rpi-tv-overlay.dts | 11 +++++--- + .../boot/dts/overlays/smi-nand-overlay.dts | 3 --- + .../boot/dts/overlays/tinylcd35-overlay.dts | 2 -- + 7 files changed, 31 insertions(+), 28 deletions(-) + +--- a/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts +@@ -64,8 +64,6 @@ + }; + + pitft_ts@1 { +- #address-cells = <1>; +- #size-cells = <0>; + compatible = "st,stmpe610"; + reg = <1>; + +--- a/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts +@@ -64,8 +64,6 @@ + }; + + pitft_ts@1 { +- #address-cells = <1>; +- #size-cells = <0>; + compatible = "st,stmpe610"; + reg = <1>; + +--- a/arch/arm/boot/dts/overlays/qca7000-overlay.dts ++++ b/arch/arm/boot/dts/overlays/qca7000-overlay.dts +@@ -8,6 +8,13 @@ + compatible = "brcm,bcm2708"; + + fragment@0 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { + target = <&spi0>; + __overlay__ { + /* needed to avoid dtc warning */ +@@ -16,10 +23,6 @@ + + status = "okay"; + +- spidev@0 { +- status = "disabled"; +- }; +- + eth1: qca7000@0 { + compatible = "qca,qca7000"; + reg = <0>; /* CE0 */ +@@ -33,7 +36,7 @@ + }; + }; + +- fragment@1 { ++ fragment@2 { + target = <&gpio>; + __overlay__ { + eth1_pins: eth1_pins { +--- a/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts +@@ -44,20 +44,26 @@ + }; + + fragment@3 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@5 { + target = <&spi0>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + +- spidev@0{ +- status = "disabled"; +- }; +- +- spidev@1{ +- status = "disabled"; +- }; +- + wm5102@1{ + compatible = "wlf,wm5102"; + reg = <1>; +@@ -117,7 +123,7 @@ + }; + }; + +- fragment@4 { ++ fragment@6 { + target = <&i2c1>; + __overlay__ { + status = "okay"; +@@ -135,7 +141,7 @@ + }; + }; + +- fragment@5 { ++ fragment@7 { + target = <&sound>; + __overlay__ { + compatible = "wlf,rpi-cirrus"; +--- a/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts +@@ -7,6 +7,13 @@ + compatible = "brcm,bcm2708", "brcm,bcm2709"; + + fragment@0 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { + target = <&spi0>; + __overlay__ { + /* needed to avoid dtc warning */ +@@ -15,10 +22,6 @@ + + status = "okay"; + +- spidev@0 { +- status = "disabled"; +- }; +- + cxd2880@0 { + compatible = "sony,cxd2880"; + reg = <0>; /* CE0 */ +--- a/arch/arm/boot/dts/overlays/smi-nand-overlay.dts ++++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts +@@ -20,9 +20,6 @@ + fragment@1 { + target = <&soc>; + __overlay__ { +- #address-cells = <1>; +- #size-cells = <1>; +- + nand: flash@0 { + compatible = "brcm,bcm2835-smi-nand"; + smi_handle = <&smi>; +--- a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts ++++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts +@@ -171,8 +171,6 @@ + __overlay__ { + keypad: keypad { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_pins>; + status = "disabled"; diff --git a/target/linux/brcm2708/patches-4.19/950-0139-bcm2708-rpi-Disable-txp-interrupt-unless-using-vc4-k.patch b/target/linux/brcm2708/patches-4.19/950-0139-bcm2708-rpi-Disable-txp-interrupt-unless-using-vc4-k.patch new file mode 100644 index 0000000000..40a6652527 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0139-bcm2708-rpi-Disable-txp-interrupt-unless-using-vc4-k.patch @@ -0,0 +1,41 @@ +From 44b80e04ec619a2e28ff150c3e09123399002d6d Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 17 Oct 2018 16:32:52 +0100 +Subject: [PATCH] bcm2708-rpi: Disable txp interrupt unless using + vc4-kms-v3d overlay + +Signed-off-by: popcornmix +--- + arch/arm/boot/dts/bcm2708-rpi.dtsi | 4 ++++ + arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 7 +++++++ + 2 files changed, 11 insertions(+) + +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -89,6 +89,10 @@ + sound: sound { + status = "disabled"; + }; ++ ++ txp: txp@7e004000 { ++ status = "disabled"; ++ }; + }; + + __overrides__ { +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -141,6 +141,13 @@ + }; + }; + ++ fragment@17 { ++ target = <&txp>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ + __overrides__ { + cma-256 = <0>,"+0-1-2-3-4"; + cma-192 = <0>,"-0+1-2-3-4"; diff --git a/target/linux/brcm2708/patches-4.19/950-0139-cxd2880-CXD2880_SPI_DRV-should-select-DVB_CXD2880-wi.patch b/target/linux/brcm2708/patches-4.19/950-0139-cxd2880-CXD2880_SPI_DRV-should-select-DVB_CXD2880-wi.patch deleted file mode 100644 index 7125b19e61..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0139-cxd2880-CXD2880_SPI_DRV-should-select-DVB_CXD2880-wi.patch +++ /dev/null @@ -1,20 +0,0 @@ -From a54bad2a438d7c67b1e012cf31fd2a112bc90e2a Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 17 Sep 2018 17:31:18 +0100 -Subject: [PATCH 139/806] cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 - with MEDIA_SUBDRV_AUTOSELECT - ---- - drivers/media/spi/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/media/spi/Kconfig -+++ b/drivers/media/spi/Kconfig -@@ -19,6 +19,7 @@ menu "Media SPI Adapters" - config CXD2880_SPI_DRV - tristate "Sony CXD2880 SPI support" - depends on DVB_CORE && SPI -+ select DVB_CXD2880 if MEDIA_SUBDRV_AUTOSELECT - default m if !MEDIA_SUBDRV_AUTOSELECT - help - Choose if you would like to have SPI interface support for Sony CXD2880. diff --git a/target/linux/brcm2708/patches-4.19/950-0140-bcm2835-interpolate-audio-delay.patch b/target/linux/brcm2708/patches-4.19/950-0140-bcm2835-interpolate-audio-delay.patch deleted file mode 100644 index 5a54adda12..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0140-bcm2835-interpolate-audio-delay.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 652b0ec2ab2d2e2af7bb4f7d62a4020a20720677 Mon Sep 17 00:00:00 2001 -From: wm4 -Date: Wed, 13 Jan 2016 19:44:47 +0100 -Subject: [PATCH 140/806] bcm2835: interpolate audio delay - -It appears the GPU only sends us a message all 10ms to update -the playback progress. Other than this, the playback position -(what SNDRV_PCM_IOCTL_DELAY will return) is not updated at all. -Userspace will see jitter up to 10ms in the audio position. - -Make this a bit nicer for userspace by interpolating the -position using the CPU clock. - -I'm not sure if setting snd_pcm_runtime.delay is the right -approach for this. Or if there is maybe an already existing -mechanism for position interpolation in the ALSA core. - -I only set SNDRV_PCM_INFO_BATCH because this appears to remove -at least one situation snd_pcm_runtime.delay is used, so I have -to worry less in which place I have to update this field, or -how it interacts with the rest of ALSA. - -In the future, it might be nice to use VC_AUDIO_MSG_TYPE_LATENCY. -One problem is that it requires sending a videocore message, and -waiting for a reply, which could make the implementation much -harder due to locking and synchronization requirements. ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 12 +++++++++++- - .../staging/vc04_services/bcm2835-audio/bcm2835.h | 1 + - 2 files changed, 12 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -11,7 +11,7 @@ - /* hardware definition */ - static const struct snd_pcm_hardware snd_bcm2835_playback_hw = { - .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | -- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), -+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_BATCH), - .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, - .rate_min = 8000, -@@ -81,6 +81,8 @@ void bcm2835_playback_fifo(struct bcm283 - alsa_stream->pos %= alsa_stream->buffer_size; - } - -+ alsa_stream->interpolate_start = ktime_get_ns(); -+ - if (alsa_stream->substream) { - if (new_period) - snd_pcm_period_elapsed(alsa_stream->substream); -@@ -306,6 +308,7 @@ static int snd_bcm2835_pcm_prepare(struc - alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); - alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); - alsa_stream->pos = 0; -+ alsa_stream->interpolate_start = ktime_get_ns(); - - audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", - alsa_stream->buffer_size, alsa_stream->period_size, -@@ -397,12 +400,19 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s - { - struct snd_pcm_runtime *runtime = substream->runtime; - struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; -+ u64 now = ktime_get_ns(); - - audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, - frames_to_bytes(runtime, runtime->status->hw_ptr), - frames_to_bytes(runtime, runtime->control->appl_ptr), - alsa_stream->pos); - -+ /* Give userspace better delay reporting by interpolating between GPU -+ * notifications, assuming audio speed is close enough to the clock -+ * used for ktime */ -+ if (alsa_stream->interpolate_start && alsa_stream->interpolate_start < now) -+ runtime->delay = -(int)div_u64((now - alsa_stream->interpolate_start) * runtime->rate, 1000000000); -+ - return snd_pcm_indirect_playback_pointer(substream, - &alsa_stream->pcm_indirect, - alsa_stream->pos); ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -133,6 +133,7 @@ struct bcm2835_alsa_stream { - unsigned int pos; - unsigned int buffer_size; - unsigned int period_size; -+ u64 interpolate_start; - - atomic_t retrieved; - struct bcm2835_audio_instance *instance; diff --git a/target/linux/brcm2708/patches-4.19/950-0140-hwmon-raspberrypi-Prevent-voltage-low-warnings-from-.patch b/target/linux/brcm2708/patches-4.19/950-0140-hwmon-raspberrypi-Prevent-voltage-low-warnings-from-.patch new file mode 100644 index 0000000000..ea9846d099 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0140-hwmon-raspberrypi-Prevent-voltage-low-warnings-from-.patch @@ -0,0 +1,75 @@ +From e7056be388c7bbc6f0211f587643ff795ce30814 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 6 Oct 2018 16:46:18 +0200 +Subject: [PATCH] hwmon: raspberrypi: Prevent voltage low warnings from + filling log + +Although the correct fix for low voltage warnings is to +improve the power supply, the current implementation +of the detection can fill the log if the warning +happens freqently. This replaces the logging with +slightly custom ratelimited logging. + +Signed-off-by: James Hughes +Signed-off-by: Stefan Wahren +--- + drivers/hwmon/raspberrypi-hwmon.c | 41 ++++++++++++++++++++++++++++--- + 1 file changed, 37 insertions(+), 4 deletions(-) + +--- a/drivers/hwmon/raspberrypi-hwmon.c ++++ b/drivers/hwmon/raspberrypi-hwmon.c +@@ -15,6 +15,36 @@ + #include + #include + ++/* ++ * This section defines some rate limited logging that prevent ++ * repeated messages at much lower Hz than the default kernel settings. ++ * It's usually 5s, this is 5 minutes. ++ * Burst 3 means you may get three messages 'quickly', before ++ * the ratelimiting kicks in. ++ */ ++#define LOCAL_RATELIMIT_INTERVAL (5 * 60 * HZ) ++#define LOCAL_RATELIMIT_BURST 3 ++ ++#ifdef CONFIG_PRINTK ++#define printk_ratelimited_local(fmt, ...) \ ++({ \ ++ static DEFINE_RATELIMIT_STATE(_rs, \ ++ LOCAL_RATELIMIT_INTERVAL, \ ++ LOCAL_RATELIMIT_BURST); \ ++ \ ++ if (__ratelimit(&_rs)) \ ++ printk(fmt, ##__VA_ARGS__); \ ++}) ++#else ++#define printk_ratelimited_local(fmt, ...) \ ++ no_printk(fmt, ##__VA_ARGS__) ++#endif ++ ++#define pr_crit_ratelimited_local(fmt, ...) \ ++ printk_ratelimited_local(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) ++#define pr_info_ratelimited_local(fmt, ...) \ ++printk_ratelimited_local(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) ++ + #define UNDERVOLTAGE_STICKY_BIT BIT(16) + + struct rpi_hwmon_data { +@@ -47,10 +77,13 @@ static void rpi_firmware_get_throttled(s + if (new_uv == old_uv) + return; + +- if (new_uv) +- dev_crit(data->hwmon_dev, "Undervoltage detected!\n"); +- else +- dev_info(data->hwmon_dev, "Voltage normalised\n"); ++ if (new_uv) { ++ pr_crit_ratelimited_local("Under-voltage detected! (0x%08x)\n", ++ value); ++ } else { ++ pr_info_ratelimited_local("Voltage normalised (0x%08x)\n", ++ value); ++ } + + sysfs_notify(&data->hwmon_dev->kobj, NULL, "in0_lcrit_alarm"); + } diff --git a/target/linux/brcm2708/patches-4.19/950-0141-firmware-raspberrypi-Add-backward-compatible-get_thr.patch b/target/linux/brcm2708/patches-4.19/950-0141-firmware-raspberrypi-Add-backward-compatible-get_thr.patch new file mode 100644 index 0000000000..24803abb29 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0141-firmware-raspberrypi-Add-backward-compatible-get_thr.patch @@ -0,0 +1,79 @@ +From 4c26452ecee989e1f43a80654a0d5cd8ce64e49e Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 13 Oct 2018 13:31:21 +0200 +Subject: [PATCH] firmware: raspberrypi: Add backward compatible + get_throttled + +Avoid a hard userspace ABI change by adding a compatible get_throttled +sysfs entry. Its value is now feed by the GET_THROTTLED requests of the +new hwmon driver. The first access to get_throttled will generate +a warning. + +Signed-off-by: Stefan Wahren +--- + drivers/firmware/raspberrypi.c | 33 +++++++++++++++++++++++++++++++++ + 1 file changed, 33 insertions(+) + +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -30,6 +30,7 @@ struct rpi_firmware { + struct mbox_chan *chan; /* The property channel. */ + struct completion c; + u32 enabled; ++ u32 get_throttled; + }; + + static struct platform_device *g_pdev; +@@ -172,6 +173,12 @@ int rpi_firmware_property(struct rpi_fir + + kfree(data); + ++ if ((tag == RPI_FIRMWARE_GET_THROTTLED) && ++ memcmp(&fw->get_throttled, tag_data, sizeof(fw->get_throttled))) { ++ memcpy(&fw->get_throttled, tag_data, sizeof(fw->get_throttled)); ++ sysfs_notify(&fw->cl.dev->kobj, NULL, "get_throttled"); ++ } ++ + return ret; + } + EXPORT_SYMBOL_GPL(rpi_firmware_property); +@@ -196,6 +203,27 @@ static int rpi_firmware_notify_reboot(st + return 0; + } + ++static ssize_t get_throttled_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct rpi_firmware *fw = dev_get_drvdata(dev); ++ ++ WARN_ONCE(1, "deprecated, use hwmon sysfs instead\n"); ++ ++ return sprintf(buf, "%x\n", fw->get_throttled); ++} ++ ++static DEVICE_ATTR_RO(get_throttled); ++ ++static struct attribute *rpi_firmware_dev_attrs[] = { ++ &dev_attr_get_throttled.attr, ++ NULL, ++}; ++ ++static const struct attribute_group rpi_firmware_dev_group = { ++ .attrs = rpi_firmware_dev_attrs, ++}; ++ + static void + rpi_firmware_print_firmware_revision(struct rpi_firmware *fw) + { +@@ -228,6 +256,11 @@ rpi_register_hwmon_driver(struct device + + rpi_hwmon = platform_device_register_data(dev, "raspberrypi-hwmon", + -1, NULL, 0); ++ ++ if (!IS_ERR_OR_NULL(rpi_hwmon)) { ++ if (devm_device_add_group(dev, &rpi_firmware_dev_group)) ++ dev_err(dev, "Failed to create get_trottled attr\n"); ++ } + } + + static int rpi_firmware_probe(struct platform_device *pdev) diff --git a/target/linux/brcm2708/patches-4.19/950-0141-vchiq_2835_arm-Implement-a-DMA-pool-for-small-bulk-t.patch b/target/linux/brcm2708/patches-4.19/950-0141-vchiq_2835_arm-Implement-a-DMA-pool-for-small-bulk-t.patch deleted file mode 100644 index dd128a1618..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0141-vchiq_2835_arm-Implement-a-DMA-pool-for-small-bulk-t.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 75fdebcf15e8023b9640d9fc2e3ed227e5563968 Mon Sep 17 00:00:00 2001 -From: detule -Date: Tue, 2 Oct 2018 04:10:08 -0400 -Subject: [PATCH 141/806] vchiq_2835_arm: Implement a DMA pool for small bulk - transfers (#2699) - -During a bulk transfer we request a DMA allocation to hold the -scatter-gather list. Most of the time, this allocation is small -(<< PAGE_SIZE), however it can be requested at a high enough frequency -to cause fragmentation and/or stress the CMA allocator (think time -spent in compaction here, or during allocations elsewhere). - -Implement a pool to serve up small DMA allocations, falling back -to a coherent allocation if the request is greater than -VCHIQ_DMA_POOL_SIZE. - -Signed-off-by: Oliver Gjoneski ---- - .../interface/vchiq_arm/vchiq_2835_arm.c | 40 +++++++++++++++---- - 1 file changed, 33 insertions(+), 7 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -@@ -37,6 +37,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -60,6 +61,8 @@ - #define BELL0 0x00 - #define BELL2 0x08 - -+#define VCHIQ_DMA_POOL_SIZE PAGE_SIZE -+ - struct vchiq_2835_state { - int inited; - VCHIQ_ARM_STATE_T arm_state; -@@ -69,6 +72,7 @@ struct vchiq_pagelist_info { - PAGELIST_T *pagelist; - size_t pagelist_buffer_size; - dma_addr_t dma_addr; -+ bool is_from_pool; - enum dma_data_direction dma_dir; - unsigned int num_pages; - unsigned int pages_need_release; -@@ -91,6 +95,7 @@ static void __iomem *g_regs; - * relevant Device Tree node. - */ - static unsigned int g_cache_line_size; -+static struct dma_pool *g_dma_pool; - static unsigned int g_fragments_size; - static char *g_fragments_base; - static char *g_free_fragments; -@@ -206,6 +211,14 @@ int vchiq_platform_init(struct platform_ - } - - g_dev = dev; -+ g_dma_pool = dmam_pool_create("vchiq_scatter_pool", dev, -+ VCHIQ_DMA_POOL_SIZE, g_cache_line_size, -+ 0); -+ if (!g_dma_pool) { -+ dev_err(dev, "failed to create dma pool"); -+ return -ENOMEM; -+ } -+ - vchiq_log_info(vchiq_arm_log_level, - "vchiq_init - done (slots %pK, phys %pad)", - vchiq_slot_zero, &slot_phys); -@@ -397,9 +410,14 @@ cleanup_pagelistinfo(struct vchiq_pageli - for (i = 0; i < pagelistinfo->num_pages; i++) - put_page(pagelistinfo->pages[i]); - } -- -- dma_free_coherent(g_dev, pagelistinfo->pagelist_buffer_size, -- pagelistinfo->pagelist, pagelistinfo->dma_addr); -+ if (pagelistinfo->is_from_pool) { -+ dma_pool_free(g_dma_pool, pagelistinfo->pagelist, -+ pagelistinfo->dma_addr); -+ } else { -+ dma_free_coherent(g_dev, pagelistinfo->pagelist_buffer_size, -+ pagelistinfo->pagelist, -+ pagelistinfo->dma_addr); -+ } - } - - /* There is a potential problem with partial cache lines (pages?) -@@ -419,6 +437,7 @@ create_pagelist(char __user *buf, size_t - u32 *addrs; - unsigned int num_pages, offset, i, k; - int actual_pages; -+ bool is_from_pool; - size_t pagelist_size; - struct scatterlist *scatterlist, *sg; - int dma_buffers; -@@ -445,10 +464,16 @@ create_pagelist(char __user *buf, size_t - /* Allocate enough storage to hold the page pointers and the page - * list - */ -- pagelist = dma_zalloc_coherent(g_dev, -- pagelist_size, -- &dma_addr, -- GFP_KERNEL); -+ if (pagelist_size > VCHIQ_DMA_POOL_SIZE) { -+ pagelist = dma_zalloc_coherent(g_dev, -+ pagelist_size, -+ &dma_addr, -+ GFP_KERNEL); -+ is_from_pool = false; -+ } else { -+ pagelist = dma_pool_zalloc(g_dma_pool, GFP_KERNEL, &dma_addr); -+ is_from_pool = true; -+ } - - vchiq_log_trace(vchiq_arm_log_level, "%s - %pK", __func__, pagelist); - -@@ -469,6 +494,7 @@ create_pagelist(char __user *buf, size_t - pagelistinfo->pagelist = pagelist; - pagelistinfo->pagelist_buffer_size = pagelist_size; - pagelistinfo->dma_addr = dma_addr; -+ pagelistinfo->is_from_pool = is_from_pool; - pagelistinfo->dma_dir = (type == PAGELIST_WRITE) ? - DMA_TO_DEVICE : DMA_FROM_DEVICE; - pagelistinfo->num_pages = num_pages; diff --git a/target/linux/brcm2708/patches-4.19/950-0142-BCM2708_DT-Use-upstreamed-GPIO-expander-driver.patch b/target/linux/brcm2708/patches-4.19/950-0142-BCM2708_DT-Use-upstreamed-GPIO-expander-driver.patch deleted file mode 100644 index cc2fa3b792..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0142-BCM2708_DT-Use-upstreamed-GPIO-expander-driver.patch +++ /dev/null @@ -1,50 +0,0 @@ -From b44b364b2762579776addb7371f71b77fce62eb8 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 8 Oct 2018 12:20:36 +0100 -Subject: [PATCH 142/806] BCM2708_DT: Use upstreamed GPIO expander driver - -The upstreamed driver for the GPIO expander has a different compatible -string. Change the relevant Device Tree files to match. - -See: https://github.com/raspberrypi/linux/issues/2704 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 2 +- - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 2 +- - arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 2 +- - 3 files changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -@@ -84,7 +84,7 @@ - - &soc { - expgpio: expgpio { -- compatible = "brcm,bcm2835-expgpio"; -+ compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - firmware = <&firmware>; ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -92,7 +92,7 @@ - }; - - expgpio: expgpio { -- compatible = "brcm,bcm2835-expgpio"; -+ compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - firmware = <&firmware>; ---- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -@@ -52,7 +52,7 @@ - }; - - expgpio: expgpio { -- compatible = "brcm,bcm2835-expgpio"; -+ compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - firmware = <&firmware>; diff --git a/target/linux/brcm2708/patches-4.19/950-0142-sc16is7xx-Don-t-spin-if-no-data-received.patch b/target/linux/brcm2708/patches-4.19/950-0142-sc16is7xx-Don-t-spin-if-no-data-received.patch new file mode 100644 index 0000000000..6f22881731 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0142-sc16is7xx-Don-t-spin-if-no-data-received.patch @@ -0,0 +1,23 @@ +From 3f8c7542e12f23f6be2cd7206fbf808409db2848 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 6 Nov 2018 12:57:48 +0000 +Subject: [PATCH] sc16is7xx: Don't spin if no data received + +See: https://github.com/raspberrypi/linux/issues/2676 + +Signed-off-by: Phil Elwell +--- + drivers/tty/serial/sc16is7xx.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/tty/serial/sc16is7xx.c ++++ b/drivers/tty/serial/sc16is7xx.c +@@ -696,6 +696,8 @@ static bool sc16is7xx_port_irq(struct sc + rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + if (rxlen) + sc16is7xx_handle_rx(port, rxlen, iir); ++ else ++ return false; + break; + case SC16IS7XX_IIR_THRI_SRC: + sc16is7xx_handle_tx(port); diff --git a/target/linux/brcm2708/patches-4.19/950-0143-Add-device-tree-overlay-for-HD44780.patch b/target/linux/brcm2708/patches-4.19/950-0143-Add-device-tree-overlay-for-HD44780.patch new file mode 100644 index 0000000000..f48b8eab99 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0143-Add-device-tree-overlay-for-HD44780.patch @@ -0,0 +1,105 @@ +From b5ec75dab38af2429278df48121642cb5605e318 Mon Sep 17 00:00:00 2001 +From: Jasper Boomer +Date: Sun, 24 Jun 2018 12:20:27 -0400 +Subject: [PATCH] Add device tree overlay for HD44780 + +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 25 ++++++++++ + .../boot/dts/overlays/hd44780-lcd-overlay.dts | 46 +++++++++++++++++++ + 3 files changed, 72 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -38,6 +38,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + gpio-no-irq.dtbo \ + gpio-poweroff.dtbo \ + gpio-shutdown.dtbo \ ++ hd44780-lcd.dtbo \ + hifiberry-amp.dtbo \ + hifiberry-dac.dtbo \ + hifiberry-dacplus.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -639,6 +639,31 @@ Params: gpio_pin GPIO pin + external pullup. + + ++Name: hd44780-lcd ++Info: Configures an HD44780 compatible LCD display. Uses 4 gpio pins for ++ data, 2 gpio pins for enable and register select and 1 optional pin ++ for enabling/disabling the backlight display. ++Load: dtoverlay=hd44780-lcd,= ++Params: pin_d4 GPIO pin for data pin D4 (default 6) ++ ++ pin_d5 GPIO pin for data pin D5 (default 13) ++ ++ pin_d6 GPIO pin for data pin D6 (default 19) ++ ++ pin_d7 GPIO pin for data pin D7 (default 26) ++ ++ pin_en GPIO pin for "Enable" (default 21) ++ ++ pin_rs GPIO pin for "Register Select" (default 20) ++ ++ pin_bl Optional pin for enabling/disabling the ++ display backlight. (default disabled) ++ ++ display_height Height of the display in characters ++ ++ display_width Width of the display in characters ++ ++ + Name: hifiberry-amp + Info: Configures the HifiBerry Amp and Amp+ audio cards + Load: dtoverlay=hifiberry-amp +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts +@@ -0,0 +1,46 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ lcd_screen: auxdisplay { ++ compatible = "hit,hd44780"; ++ ++ data-gpios = <&gpio 6 0>, ++ <&gpio 13 0>, ++ <&gpio 19 0>, ++ <&gpio 26 0>; ++ enable-gpios = <&gpio 21 0>; ++ rs-gpios = <&gpio 20 0>; ++ ++ display-height-chars = <2>; ++ display-width-chars = <16>; ++ }; ++ ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&lcd_screen>; ++ __dormant__ { ++ backlight-gpios = <&gpio 12 0>; ++ }; ++ }; ++ ++ __overrides__ { ++ pin_d4 = <&lcd_screen>,"data-gpios:4"; ++ pin_d5 = <&lcd_screen>,"data-gpios:16"; ++ pin_d6 = <&lcd_screen>,"data-gpios:28"; ++ pin_d7 = <&lcd_screen>,"data-gpios:40"; ++ pin_en = <&lcd_screen>,"enable-gpios:4"; ++ pin_rs = <&lcd_screen>,"rs-gpios:4"; ++ pin_bl = <0>,"+1", <&lcd_screen>,"backlight-gpios:4"; ++ display_height = <&lcd_screen>,"display-height-chars:0"; ++ display_width = <&lcd_screen>,"display-width-chars:0"; ++ }; ++ ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0143-overlays-Fix-a-few-dtc-warnings.patch b/target/linux/brcm2708/patches-4.19/950-0143-overlays-Fix-a-few-dtc-warnings.patch deleted file mode 100644 index 5ed3a8fe36..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0143-overlays-Fix-a-few-dtc-warnings.patch +++ /dev/null @@ -1,179 +0,0 @@ -From 13abcbfdc76f1a40c36367fe28b76e29742b2d05 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 8 Oct 2018 17:16:28 +0100 -Subject: [PATCH 143/806] overlays: Fix a few dtc warnings - -Signed-off-by: Phil Elwell ---- - .../overlays/pitft28-resistive-overlay.dts | 2 -- - .../overlays/pitft35-resistive-overlay.dts | 2 -- - .../arm/boot/dts/overlays/qca7000-overlay.dts | 13 ++++++---- - .../overlays/rpi-cirrus-wm5102-overlay.dts | 26 ++++++++++++------- - arch/arm/boot/dts/overlays/rpi-tv-overlay.dts | 11 +++++--- - .../boot/dts/overlays/smi-nand-overlay.dts | 3 --- - .../boot/dts/overlays/tinylcd35-overlay.dts | 2 -- - 7 files changed, 31 insertions(+), 28 deletions(-) - ---- a/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts -@@ -64,8 +64,6 @@ - }; - - pitft_ts@1 { -- #address-cells = <1>; -- #size-cells = <0>; - compatible = "st,stmpe610"; - reg = <1>; - ---- a/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts -@@ -64,8 +64,6 @@ - }; - - pitft_ts@1 { -- #address-cells = <1>; -- #size-cells = <0>; - compatible = "st,stmpe610"; - reg = <1>; - ---- a/arch/arm/boot/dts/overlays/qca7000-overlay.dts -+++ b/arch/arm/boot/dts/overlays/qca7000-overlay.dts -@@ -8,6 +8,13 @@ - compatible = "brcm,bcm2708"; - - fragment@0 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ -@@ -16,10 +23,6 @@ - - status = "okay"; - -- spidev@0 { -- status = "disabled"; -- }; -- - eth1: qca7000@0 { - compatible = "qca,qca7000"; - reg = <0>; /* CE0 */ -@@ -33,7 +36,7 @@ - }; - }; - -- fragment@1 { -+ fragment@2 { - target = <&gpio>; - __overlay__ { - eth1_pins: eth1_pins { ---- a/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts -@@ -44,20 +44,26 @@ - }; - - fragment@3 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@5 { - target = <&spi0>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - -- spidev@0{ -- status = "disabled"; -- }; -- -- spidev@1{ -- status = "disabled"; -- }; -- - wm5102@1{ - compatible = "wlf,wm5102"; - reg = <1>; -@@ -117,7 +123,7 @@ - }; - }; - -- fragment@4 { -+ fragment@6 { - target = <&i2c1>; - __overlay__ { - status = "okay"; -@@ -135,7 +141,7 @@ - }; - }; - -- fragment@5 { -+ fragment@7 { - target = <&sound>; - __overlay__ { - compatible = "wlf,rpi-cirrus"; ---- a/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts -@@ -7,6 +7,13 @@ - compatible = "brcm,bcm2708", "brcm,bcm2709"; - - fragment@0 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ -@@ -15,10 +22,6 @@ - - status = "okay"; - -- spidev@0 { -- status = "disabled"; -- }; -- - cxd2880@0 { - compatible = "sony,cxd2880"; - reg = <0>; /* CE0 */ ---- a/arch/arm/boot/dts/overlays/smi-nand-overlay.dts -+++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts -@@ -20,9 +20,6 @@ - fragment@1 { - target = <&soc>; - __overlay__ { -- #address-cells = <1>; -- #size-cells = <1>; -- - nand: flash@0 { - compatible = "brcm,bcm2835-smi-nand"; - smi_handle = <&smi>; ---- a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts -+++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts -@@ -171,8 +171,6 @@ - __overlay__ { - keypad: keypad { - compatible = "gpio-keys"; -- #address-cells = <1>; -- #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&keypad_pins>; - status = "disabled"; diff --git a/target/linux/brcm2708/patches-4.19/950-0144-bcm2708-rpi-Disable-txp-interrupt-unless-using-vc4-k.patch b/target/linux/brcm2708/patches-4.19/950-0144-bcm2708-rpi-Disable-txp-interrupt-unless-using-vc4-k.patch deleted file mode 100644 index e4cead3b14..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0144-bcm2708-rpi-Disable-txp-interrupt-unless-using-vc4-k.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 44b80e04ec619a2e28ff150c3e09123399002d6d Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 17 Oct 2018 16:32:52 +0100 -Subject: [PATCH 144/806] bcm2708-rpi: Disable txp interrupt unless using - vc4-kms-v3d overlay - -Signed-off-by: popcornmix ---- - arch/arm/boot/dts/bcm2708-rpi.dtsi | 4 ++++ - arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 7 +++++++ - 2 files changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -89,6 +89,10 @@ - sound: sound { - status = "disabled"; - }; -+ -+ txp: txp@7e004000 { -+ status = "disabled"; -+ }; - }; - - __overrides__ { ---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -@@ -141,6 +141,13 @@ - }; - }; - -+ fragment@17 { -+ target = <&txp>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ - __overrides__ { - cma-256 = <0>,"+0-1-2-3-4"; - cma-192 = <0>,"-0+1-2-3-4"; diff --git a/target/linux/brcm2708/patches-4.19/950-0144-overlays-Add-addr-parameter-to-i2c-rtc-gpio.patch b/target/linux/brcm2708/patches-4.19/950-0144-overlays-Add-addr-parameter-to-i2c-rtc-gpio.patch new file mode 100644 index 0000000000..ef8e1eaaa8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0144-overlays-Add-addr-parameter-to-i2c-rtc-gpio.patch @@ -0,0 +1,111 @@ +From 20dbf906033167e7c4296eee07437d52627d8ccf Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 9 Jul 2018 21:11:32 +0100 +Subject: [PATCH] overlays: Add addr parameter to i2c-rtc (& -gpio) + +See: https://github.com/raspberrypi/linux/issues/2611 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 10 +++++++ + .../dts/overlays/i2c-rtc-gpio-overlay.dts | 28 +++++++++++++++++++ + .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 11 ++++++++ + 3 files changed, 49 insertions(+) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -817,6 +817,10 @@ Params: abx80x Select o + + pcf8563 Select the PCF8563 device + ++ addr Sets the address for the RTC. Note that the ++ device must be configured to use the specified ++ address. ++ + trickle-diode-type Diode type for trickle charge - "standard" or + "schottky" (ABx80x only) + +@@ -841,6 +845,8 @@ Params: abx80x Select o + + ds3231 Select the DS3231 device + ++ m41t62 Select the M41T62 device ++ + mcp7940x Select the MCP7940x device + + mcp7941x Select the MCP7941x device +@@ -851,6 +857,10 @@ Params: abx80x Select o + + pcf8563 Select the PCF8563 device + ++ addr Sets the address for the RTC. Note that the ++ device must be configured to use the specified ++ address. ++ + trickle-diode-type Diode type for trickle charge - "standard" or + "schottky" (ABx80x only) + +--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts +@@ -159,6 +159,21 @@ + }; + }; + ++ fragment@10 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ m41t62: m41t62@68 { ++ compatible = "st,m41t62"; ++ reg = <0x68>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ + __overrides__ { + abx80x = <0>,"+1"; + ds1307 = <0>,"+2"; +@@ -169,6 +184,19 @@ + pcf2127 = <0>,"+7"; + pcf8523 = <0>,"+8"; + pcf8563 = <0>,"+9"; ++ m41t62 = <0>,"+10"; ++ ++ addr = <&abx80x>, "reg:0", ++ <&ds1307>, "reg:0", ++ <&ds1339>, "reg:0", ++ <&ds3231>, "reg:0", ++ <&mcp7940x>, "reg:0", ++ <&mcp7941x>, "reg:0", ++ <&pcf2127>, "reg:0", ++ <&pcf8523>, "reg:0", ++ <&pcf8563>, "reg:0", ++ <&m41t62>, "reg:0"; ++ + trickle-diode-type = <&abx80x>,"abracon,tc-diode"; + trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", + <&abx80x>,"abracon,tc-resistor"; +--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +@@ -169,6 +169,17 @@ + pcf8523 = <0>,"+7"; + pcf8563 = <0>,"+8"; + m41t62 = <0>,"+9"; ++ ++ addr = <&abx80x>, "reg:0", ++ <&ds1307>, "reg:0", ++ <&ds1339>, "reg:0", ++ <&ds3231>, "reg:0", ++ <&mcp7940x>, "reg:0", ++ <&mcp7941x>, "reg:0", ++ <&pcf2127>, "reg:0", ++ <&pcf8523>, "reg:0", ++ <&pcf8563>, "reg:0", ++ <&m41t62>, "reg:0"; + trickle-diode-type = <&abx80x>,"abracon,tc-diode"; + trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", + <&abx80x>,"abracon,tc-resistor"; diff --git a/target/linux/brcm2708/patches-4.19/950-0145-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch b/target/linux/brcm2708/patches-4.19/950-0145-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch new file mode 100644 index 0000000000..7e5286eaac --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0145-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch @@ -0,0 +1,30 @@ +From 8a9c6862c6010b4500cb08c62ac4aea6897cf485 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 9 Mar 2018 14:24:05 -0800 +Subject: [PATCH] ARM: BCM270X: Add the 18-bit DPI pinmux to the RPI + DTs. + +This doesn't do anything by default, but trying to put the node in an +overlay failed for me. + +Signed-off-by: Eric Anholt +--- + arch/arm/boot/dts/bcm270x.dtsi | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -19,6 +19,13 @@ + + gpio@7e200000 { /* gpio */ + interrupts = <2 17>, <2 18>; ++ ++ dpi_18bit_gpio0: dpi_18bit_gpio0 { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19 ++ 20 21>; ++ brcm,function = ; ++ }; + }; + + serial@7e201000 { /* uart0 */ diff --git a/target/linux/brcm2708/patches-4.19/950-0146-hwmon-raspberrypi-Prevent-voltage-low-warnings-from-.patch b/target/linux/brcm2708/patches-4.19/950-0146-hwmon-raspberrypi-Prevent-voltage-low-warnings-from-.patch deleted file mode 100644 index 33ef6af085..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0146-hwmon-raspberrypi-Prevent-voltage-low-warnings-from-.patch +++ /dev/null @@ -1,75 +0,0 @@ -From e7056be388c7bbc6f0211f587643ff795ce30814 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 6 Oct 2018 16:46:18 +0200 -Subject: [PATCH 146/806] hwmon: raspberrypi: Prevent voltage low warnings from - filling log - -Although the correct fix for low voltage warnings is to -improve the power supply, the current implementation -of the detection can fill the log if the warning -happens freqently. This replaces the logging with -slightly custom ratelimited logging. - -Signed-off-by: James Hughes -Signed-off-by: Stefan Wahren ---- - drivers/hwmon/raspberrypi-hwmon.c | 41 ++++++++++++++++++++++++++++--- - 1 file changed, 37 insertions(+), 4 deletions(-) - ---- a/drivers/hwmon/raspberrypi-hwmon.c -+++ b/drivers/hwmon/raspberrypi-hwmon.c -@@ -15,6 +15,36 @@ - #include - #include - -+/* -+ * This section defines some rate limited logging that prevent -+ * repeated messages at much lower Hz than the default kernel settings. -+ * It's usually 5s, this is 5 minutes. -+ * Burst 3 means you may get three messages 'quickly', before -+ * the ratelimiting kicks in. -+ */ -+#define LOCAL_RATELIMIT_INTERVAL (5 * 60 * HZ) -+#define LOCAL_RATELIMIT_BURST 3 -+ -+#ifdef CONFIG_PRINTK -+#define printk_ratelimited_local(fmt, ...) \ -+({ \ -+ static DEFINE_RATELIMIT_STATE(_rs, \ -+ LOCAL_RATELIMIT_INTERVAL, \ -+ LOCAL_RATELIMIT_BURST); \ -+ \ -+ if (__ratelimit(&_rs)) \ -+ printk(fmt, ##__VA_ARGS__); \ -+}) -+#else -+#define printk_ratelimited_local(fmt, ...) \ -+ no_printk(fmt, ##__VA_ARGS__) -+#endif -+ -+#define pr_crit_ratelimited_local(fmt, ...) \ -+ printk_ratelimited_local(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) -+#define pr_info_ratelimited_local(fmt, ...) \ -+printk_ratelimited_local(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) -+ - #define UNDERVOLTAGE_STICKY_BIT BIT(16) - - struct rpi_hwmon_data { -@@ -47,10 +77,13 @@ static void rpi_firmware_get_throttled(s - if (new_uv == old_uv) - return; - -- if (new_uv) -- dev_crit(data->hwmon_dev, "Undervoltage detected!\n"); -- else -- dev_info(data->hwmon_dev, "Voltage normalised\n"); -+ if (new_uv) { -+ pr_crit_ratelimited_local("Under-voltage detected! (0x%08x)\n", -+ value); -+ } else { -+ pr_info_ratelimited_local("Voltage normalised (0x%08x)\n", -+ value); -+ } - - sysfs_notify(&data->hwmon_dev->kobj, NULL, "in0_lcrit_alarm"); - } diff --git a/target/linux/brcm2708/patches-4.19/950-0146-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch b/target/linux/brcm2708/patches-4.19/950-0146-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch new file mode 100644 index 0000000000..56d9d9aca1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0146-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch @@ -0,0 +1,86 @@ +From 467e9cb87261c27b6c70ec714ae3cb58b48d0f6b Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 9 Mar 2018 13:20:21 -0800 +Subject: [PATCH] overlays: Add an overlay for the Adafruit Kippah with + their 7" panel + +Signed-off-by: Eric Anholt +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 7 +++ + .../overlays/vc4-kms-kippah-7inch-overlay.dts | 43 +++++++++++++++++++ + 3 files changed, 51 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -134,6 +134,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + upstream.dtbo \ + upstream-aux-interrupt.dtbo \ + vc4-fkms-v3d.dtbo \ ++ vc4-kms-kippah-7inch.dtbo \ + vc4-kms-v3d.dtbo \ + vga666.dtbo \ + w1-gpio.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1920,6 +1920,13 @@ Params: cma-256 CMA is 2 + cma-64 CMA is 64MB, 64MB-aligned + + ++Name: vc4-kms-kippah-7inch ++Info: Enable the Adafruit DPI Kippah with the 7" Ontat panel attached. ++ Requires vc4-kms-v3d to be loaded. ++Load: dtoverlay=vc4-kms-kippah-7inch ++Params: ++ ++ + Name: vc4-kms-v3d + Info: Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or + booting to GUI while this overlay is in use will cause interesting +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts +@@ -0,0 +1,43 @@ ++/* ++ * vc4-kms-v3d-overlay.dts ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++#include ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ panel: panel { ++ compatible = "ontat,yx700wv03", "simple-panel"; ++ ++ port { ++ panel_in: endpoint { ++ remote-endpoint = <&dpi_out>; ++ }; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&dpi>; ++ __overlay__ { ++ status = "okay"; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dpi_18bit_gpio0>; ++ ++ port { ++ dpi_out: endpoint@0 { ++ remote-endpoint = <&panel_in>; ++ }; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0147-firmware-raspberrypi-Add-backward-compatible-get_thr.patch b/target/linux/brcm2708/patches-4.19/950-0147-firmware-raspberrypi-Add-backward-compatible-get_thr.patch deleted file mode 100644 index 1a74f9c1fa..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0147-firmware-raspberrypi-Add-backward-compatible-get_thr.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 4c26452ecee989e1f43a80654a0d5cd8ce64e49e Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 13 Oct 2018 13:31:21 +0200 -Subject: [PATCH 147/806] firmware: raspberrypi: Add backward compatible - get_throttled - -Avoid a hard userspace ABI change by adding a compatible get_throttled -sysfs entry. Its value is now feed by the GET_THROTTLED requests of the -new hwmon driver. The first access to get_throttled will generate -a warning. - -Signed-off-by: Stefan Wahren ---- - drivers/firmware/raspberrypi.c | 33 +++++++++++++++++++++++++++++++++ - 1 file changed, 33 insertions(+) - ---- a/drivers/firmware/raspberrypi.c -+++ b/drivers/firmware/raspberrypi.c -@@ -30,6 +30,7 @@ struct rpi_firmware { - struct mbox_chan *chan; /* The property channel. */ - struct completion c; - u32 enabled; -+ u32 get_throttled; - }; - - static struct platform_device *g_pdev; -@@ -172,6 +173,12 @@ int rpi_firmware_property(struct rpi_fir - - kfree(data); - -+ if ((tag == RPI_FIRMWARE_GET_THROTTLED) && -+ memcmp(&fw->get_throttled, tag_data, sizeof(fw->get_throttled))) { -+ memcpy(&fw->get_throttled, tag_data, sizeof(fw->get_throttled)); -+ sysfs_notify(&fw->cl.dev->kobj, NULL, "get_throttled"); -+ } -+ - return ret; - } - EXPORT_SYMBOL_GPL(rpi_firmware_property); -@@ -196,6 +203,27 @@ static int rpi_firmware_notify_reboot(st - return 0; - } - -+static ssize_t get_throttled_show(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct rpi_firmware *fw = dev_get_drvdata(dev); -+ -+ WARN_ONCE(1, "deprecated, use hwmon sysfs instead\n"); -+ -+ return sprintf(buf, "%x\n", fw->get_throttled); -+} -+ -+static DEVICE_ATTR_RO(get_throttled); -+ -+static struct attribute *rpi_firmware_dev_attrs[] = { -+ &dev_attr_get_throttled.attr, -+ NULL, -+}; -+ -+static const struct attribute_group rpi_firmware_dev_group = { -+ .attrs = rpi_firmware_dev_attrs, -+}; -+ - static void - rpi_firmware_print_firmware_revision(struct rpi_firmware *fw) - { -@@ -228,6 +256,11 @@ rpi_register_hwmon_driver(struct device - - rpi_hwmon = platform_device_register_data(dev, "raspberrypi-hwmon", - -1, NULL, 0); -+ -+ if (!IS_ERR_OR_NULL(rpi_hwmon)) { -+ if (devm_device_add_group(dev, &rpi_firmware_dev_group)) -+ dev_err(dev, "Failed to create get_trottled attr\n"); -+ } - } - - static int rpi_firmware_probe(struct platform_device *pdev) diff --git a/target/linux/brcm2708/patches-4.19/950-0147-overlays-Remove-stale-notes-about-vc4-s-CMA-alignmen.patch b/target/linux/brcm2708/patches-4.19/950-0147-overlays-Remove-stale-notes-about-vc4-s-CMA-alignmen.patch new file mode 100644 index 0000000000..cd188a7170 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0147-overlays-Remove-stale-notes-about-vc4-s-CMA-alignmen.patch @@ -0,0 +1,51 @@ +From a90677b7610230ed88bd1866684e05ac2a0321f6 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 9 Mar 2018 13:26:33 -0800 +Subject: [PATCH] overlays: Remove stale notes about vc4's CMA + alignment in the README. + +We haven't needed alignment since +553c942f8b2cbc7394b4d4fa2f848b23a8f07451, and the current overlays +don't specify any. + +Signed-off-by: Eric Anholt +--- + arch/arm/boot/dts/overlays/README | 20 ++++++++++---------- + 1 file changed, 10 insertions(+), 10 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1913,11 +1913,11 @@ Name: vc4-fkms-v3d + Info: Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx + display stack. + Load: dtoverlay=vc4-fkms-v3d, +-Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) +- cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) +- cma-128 CMA is 128MB, 128MB-aligned +- cma-96 CMA is 96MB, 128MB-aligned +- cma-64 CMA is 64MB, 64MB-aligned ++Params: cma-256 CMA is 256MB (needs 1GB) ++ cma-192 CMA is 192MB (needs 1GB) ++ cma-128 CMA is 128MB ++ cma-96 CMA is 96MB ++ cma-64 CMA is 64MB + + + Name: vc4-kms-kippah-7inch +@@ -1932,11 +1932,11 @@ Info: Enable Eric Anholt's DRM VC4 HDM + booting to GUI while this overlay is in use will cause interesting + lockups. + Load: dtoverlay=vc4-kms-v3d, +-Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) +- cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) +- cma-128 CMA is 128MB, 128MB-aligned +- cma-96 CMA is 96MB, 128MB-aligned +- cma-64 CMA is 64MB, 64MB-aligned ++Params: cma-256 CMA is 256MB (needs 1GB) ++ cma-192 CMA is 192MB (needs 1GB) ++ cma-128 CMA is 128MB ++ cma-96 CMA is 96MB ++ cma-64 CMA is 64MB + + + Name: vga666 diff --git a/target/linux/brcm2708/patches-4.19/950-0148-spi-Make-GPIO-CSs-honour-the-SPI_NO_CS-flag.patch b/target/linux/brcm2708/patches-4.19/950-0148-spi-Make-GPIO-CSs-honour-the-SPI_NO_CS-flag.patch new file mode 100644 index 0000000000..727624086a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0148-spi-Make-GPIO-CSs-honour-the-SPI_NO_CS-flag.patch @@ -0,0 +1,32 @@ +From d7aa9d52b7f9b2d600f9b2479767c24d438a2c68 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 3 Jul 2018 14:23:47 +0100 +Subject: [PATCH] spi: Make GPIO CSs honour the SPI_NO_CS flag + +The SPI configuration state includes an SPI_NO_CS flag that disables +all CS line manipulation, for applications that want to manage their +own chip selects. However, this flag is ignored by the GPIO CS code +in the SPI framework. + +Correct this omission with a trivial patch. + +See: https://github.com/raspberrypi/linux/issues/2169 + +Signed-off-by: Phil Elwell +--- + drivers/spi/spi.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/spi/spi.c ++++ b/drivers/spi/spi.c +@@ -733,7 +733,9 @@ static void spi_set_cs(struct spi_device + enable = !enable; + + if (gpio_is_valid(spi->cs_gpio)) { +- gpio_set_value_cansleep(spi->cs_gpio, !enable); ++ /* Honour the SPI_NO_CS flag */ ++ if (!(spi->mode & SPI_NO_CS)) ++ gpio_set_value_cansleep(spi->cs_gpio, !enable); + /* Some SPI masters need both GPIO CS & slave_select */ + if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && + spi->controller->set_cs) diff --git a/target/linux/brcm2708/patches-4.19/950-0149-devicetree-add-RPi-CM3-dts-to-arm64-mimic-the-RPi-3B.patch b/target/linux/brcm2708/patches-4.19/950-0149-devicetree-add-RPi-CM3-dts-to-arm64-mimic-the-RPi-3B.patch new file mode 100644 index 0000000000..567052f0fb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0149-devicetree-add-RPi-CM3-dts-to-arm64-mimic-the-RPi-3B.patch @@ -0,0 +1,30 @@ +From 120cbbc17c917790fe523ee67a32e877e5592b93 Mon Sep 17 00:00:00 2001 +From: Steve Pavao +Date: Fri, 10 Aug 2018 17:09:50 -0400 +Subject: [PATCH] devicetree: add RPi CM3 dts to arm64; mimic the RPi + 3B arm64 dts implementation, by referring to the actual dts file in the arm + directory + +--- + arch/arm64/boot/dts/broadcom/Makefile | 2 ++ + arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts | 3 +++ + 2 files changed, 5 insertions(+) + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts + +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -4,6 +4,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp + dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb ++dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb ++dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb + + subdir-y += northstar2 + subdir-y += stingray +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts +@@ -0,0 +1,3 @@ ++#define RPI364 ++ ++#include "../../../../arm/boot/dts/bcm2710-rpi-cm3.dts" diff --git a/target/linux/brcm2708/patches-4.19/950-0149-sc16is7xx-Don-t-spin-if-no-data-received.patch b/target/linux/brcm2708/patches-4.19/950-0149-sc16is7xx-Don-t-spin-if-no-data-received.patch deleted file mode 100644 index cfbc59e619..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0149-sc16is7xx-Don-t-spin-if-no-data-received.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 3f8c7542e12f23f6be2cd7206fbf808409db2848 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 6 Nov 2018 12:57:48 +0000 -Subject: [PATCH 149/806] sc16is7xx: Don't spin if no data received - -See: https://github.com/raspberrypi/linux/issues/2676 - -Signed-off-by: Phil Elwell ---- - drivers/tty/serial/sc16is7xx.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/tty/serial/sc16is7xx.c -+++ b/drivers/tty/serial/sc16is7xx.c -@@ -696,6 +696,8 @@ static bool sc16is7xx_port_irq(struct sc - rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); - if (rxlen) - sc16is7xx_handle_rx(port, rxlen, iir); -+ else -+ return false; - break; - case SC16IS7XX_IIR_THRI_SRC: - sc16is7xx_handle_tx(port); diff --git a/target/linux/brcm2708/patches-4.19/950-0150-Add-support-for-audioinjector.net-ultra-soundcard.-2.patch b/target/linux/brcm2708/patches-4.19/950-0150-Add-support-for-audioinjector.net-ultra-soundcard.-2.patch new file mode 100644 index 0000000000..583b2c8b5d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0150-Add-support-for-audioinjector.net-ultra-soundcard.-2.patch @@ -0,0 +1,119 @@ +From e2516e3a7d2244f74c3267be8bdc143448c278be Mon Sep 17 00:00:00 2001 +From: Matt Flax +Date: Tue, 28 Aug 2018 18:42:13 +1000 +Subject: [PATCH] Add support for audioinjector.net ultra soundcard. + (#2664) + +Uses the simple-audio-card ALSA machine driver. Sets up the machine +driver in the device tree overlay file. The overlays/Makefile is +altered to add the audioinjector-ultra.dtbo dtb overlay. + +Adds CONFIG_SND_SOC_CS4265 to the defconfig files. + +Signed-off-by: Matt Flax +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 ++ + .../overlays/audioinjector-ultra-overlay.dts | 71 +++++++++++++++++++ + 5 files changed, 80 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -15,6 +15,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + applepi-dac.dtbo \ + at86rf233.dtbo \ + audioinjector-addons.dtbo \ ++ audioinjector-ultra.dtbo \ + audioinjector-wm8731-audio.dtbo \ + audremap.dtbo \ + balena-fin.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -389,6 +389,12 @@ Params: non-stop-clocks Keeps th + is paused or stopped (default off) + + ++Name: audioinjector-ultra ++Info: Configures the audioinjector.net ultra soundcard ++Load: dtoverlay=audioinjector-ultra ++Params: ++ ++ + Name: audioinjector-wm8731-audio + Info: Configures the audioinjector.net audio add on soundcard + Load: dtoverlay=audioinjector-wm8731-audio +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts +@@ -0,0 +1,71 @@ ++// Definitions for audioinjector.net audio add on soundcard ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ cs4265: cs4265@4e { ++ #sound-dai-cells = <0>; ++ compatible = "cirrus,cs4265"; ++ reg = <0x4e>; ++ reset-gpios = <&gpio 5 0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "simple-audio-card"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ ++ simple-audio-card,name = "audioinjector-ultra"; ++ ++ simple-audio-card,widgets = ++ "Line", "OUTPUTS", ++ "Line", "INPUTS"; ++ ++ simple-audio-card,routing = ++ "OUTPUTS","LINEOUTL", ++ "OUTPUTS","LINEOUTR", ++ "OUTPUTS","SPDIFOUT", ++ "LINEINL","INPUTS", ++ "LINEINR","INPUTS", ++ "MICL","INPUTS", ++ "MICR","INPUTS"; ++ ++ simple-audio-card,format = "i2s"; ++ ++ simple-audio-card,bitclock-master = <&sound_master>; ++ simple-audio-card,frame-master = <&sound_master>; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&i2s>; ++ dai-tdm-slot-num = <2>; ++ dai-tdm-slot-width = <32>; ++ }; ++ ++ sound_master: simple-audio-card,codec { ++ sound-dai = <&cs4265>; ++ system-clock-frequency = <12288000>; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0151-ASoC-cs4265-Add-a-S-PDIF-enable-switch.patch b/target/linux/brcm2708/patches-4.19/950-0151-ASoC-cs4265-Add-a-S-PDIF-enable-switch.patch new file mode 100644 index 0000000000..642bd2b39d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0151-ASoC-cs4265-Add-a-S-PDIF-enable-switch.patch @@ -0,0 +1,26 @@ +From 92d32a3a11bc8c290370ba37bf792996ce3da8bc Mon Sep 17 00:00:00 2001 +From: Matt Flax +Date: Thu, 30 Aug 2018 09:38:02 +1000 +Subject: [PATCH] ASoC: cs4265: Add a S/PDIF enable switch + +commit f853d6b3ba345297974d877d8ed0f4a91eaca739 upstream. + +This patch adds a S/PDIF enable switch as a SOC_SINGLE. + +Signed-off-by: Matt Flax +Reviewed-by: Charles Keepax +Signed-off-by: Mark Brown +--- + sound/soc/codecs/cs4265.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/sound/soc/codecs/cs4265.c ++++ b/sound/soc/codecs/cs4265.c +@@ -154,6 +154,7 @@ static const struct snd_kcontrol_new cs4 + SOC_SINGLE("E to F Buffer Disable Switch", CS4265_SPDIF_CTL1, + 6, 1, 0), + SOC_ENUM("C Data Access", cam_mode_enum), ++ SOC_SINGLE("SPDIF Switch", CS4265_SPDIF_CTL2, 5, 1, 1), + SOC_SINGLE("Validity Bit Control Switch", CS4265_SPDIF_CTL2, + 3, 1, 0), + SOC_ENUM("SPDIF Mono/Stereo", spdif_mono_stereo_enum), diff --git a/target/linux/brcm2708/patches-4.19/950-0152-ASoC-cs4265-Add-native-32bit-I2S-transport.patch b/target/linux/brcm2708/patches-4.19/950-0152-ASoC-cs4265-Add-native-32bit-I2S-transport.patch new file mode 100644 index 0000000000..cedc79284b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0152-ASoC-cs4265-Add-native-32bit-I2S-transport.patch @@ -0,0 +1,29 @@ +From 8b81eec1fab393a4f0df4a77788aaaccb39e55dd Mon Sep 17 00:00:00 2001 +From: Matt Flax +Date: Thu, 30 Aug 2018 09:38:01 +1000 +Subject: [PATCH] ASoC: cs4265: Add native 32bit I2S transport + +commit be47e75eb1419ffc1d9c26230963fd5fa3055097 upstream. + +The cs4265 uses 32 bit transport on the I2S bus. This patch enables native +32 bit mode for machine drivers which use this sound card driver. + +Signed-off-by: Matt Flax +Reviewed-by: Charles Keepax +Signed-off-by: Mark Brown +--- + sound/soc/codecs/cs4265.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/sound/soc/codecs/cs4265.c ++++ b/sound/soc/codecs/cs4265.c +@@ -497,7 +497,8 @@ static int cs4265_set_bias_level(struct + SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000) + + #define CS4265_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \ +- SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_U24_LE) ++ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_U24_LE | \ ++ SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE) + + static const struct snd_soc_dai_ops cs4265_ops = { + .hw_params = cs4265_pcm_hw_params, diff --git a/target/linux/brcm2708/patches-4.19/950-0153-BCM270X_DT-Add-gpio-fan-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0153-BCM270X_DT-Add-gpio-fan-overlay.patch new file mode 100644 index 0000000000..f252490382 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0153-BCM270X_DT-Add-gpio-fan-overlay.patch @@ -0,0 +1,114 @@ +From 9762b3a015886c42941f535e688ffac1f56e35aa Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 18 Sep 2018 11:08:07 +0100 +Subject: [PATCH] BCM270X_DT: Add gpio-fan overlay + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 8 +++ + .../boot/dts/overlays/gpio-fan-overlay.dts | 71 +++++++++++++++++++ + 3 files changed, 80 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/gpio-fan-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -33,6 +33,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + fe-pi-audio.dtbo \ + goodix.dtbo \ + googlevoicehat-soundcard.dtbo \ ++ gpio-fan.dtbo \ + gpio-ir.dtbo \ + gpio-ir-tx.dtbo \ + gpio-key.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -541,6 +541,14 @@ Load: dtoverlay=googlevoicehat-soundca + Params: + + ++Name: gpio-fan ++Info: Configure a GPIO pin to control a cooling fan. ++Load: dtoverlay=gpio-fan,= ++Params: gpiopin GPIO used to control the fan (default 12) ++ temp Temperature at which the fan switches on, in ++ millicelcius (default 55000) ++ ++ + Name: gpio-ir + Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- + based gpio_ir_recv driver maps received keys directly to a +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts +@@ -0,0 +1,71 @@ ++/* ++ * Overlay for the Raspberry Pi GPIO Fan @ BCM GPIO12. ++ * Optional parameters: ++ * - "gpiopin" - default GPIO12 ++ * - "temp" - default 55000 ++ * Requires: ++ * - kernel configurations: CONFIG_SENSORS_GPIO_FAN=m and CONFIG_SENSORS_PWM_FAN=m; ++ * - kernel rebuid; ++ * - DC Fan connected to GPIO via a N-MOSFET (2N7002) ++ * ++ * ┌─────────────────────┐ ++ * │Fan negative terminal│ ++ * └┬────────────────────┘ ++ * │ ++ * │──┘ ++ * [GPIO12]──────┤ │<─┐ 2N7002 ++ * │──┤ ++ * │ ++ * ─┴─ ++ * GND ++ * ++ * sudo dtc -W no-unit_address_vs_reg -@ -I dts -O dtb -o /boot/overlays/gpio-fan.dtbo gpio-fan.dts ++ * sudo nano /boot/config.txt add "dtoverlay=gpio-fan" or "dtoverlay=gpio-fan,gpiopin=12,temp=45000" ++ * or ++ * sudo sh -c "echo '\n# Enable PI GPIO-Fan\ndtoverlay=gpio-fan\n' >> /boot/config.txt" ++ * sudo sh -c "echo '\n# Enable PI GPIO-Fan\ndtoverlay=gpio-fan,gpiopin=12\n' >> /boot/config.txt" ++ * ++ */ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ fan0: gpio-fan@0 { ++ compatible = "gpio-fan"; ++ gpios = <&gpio 12 1>; ++ gpio-fan,speed-map = <0 0>, ++ <5000 1>; ++ #cooling-cells = <2>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&cpu_thermal>; ++ polling-delay = <2000>; /* milliseconds */ ++ __overlay__ { ++ trips { ++ cpu_hot: trip-point@0 { ++ temperature = <55000>; /* (millicelsius) Fan started at 55°C */ ++ hysteresis = <5000>; /* (millicelsius) Fan stopped at 50°C */ ++ type = "active"; ++ }; ++ }; ++ cooling-maps { ++ map0 { ++ trip = <&cpu_hot>; ++ cooling-device = <&fan0 1 1>; ++ }; ++ }; ++ }; ++ }; ++ __overrides__ { ++ gpiopin = <&fan0>,"gpios:4", <&fan0>,"brcm,pins:0"; ++ temp = <&cpu_hot>,"temperature:0"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0154-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch b/target/linux/brcm2708/patches-4.19/950-0154-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch new file mode 100644 index 0000000000..52bd49af5e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0154-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch @@ -0,0 +1,484 @@ +From 08e33d99152acc5e35fd94f9b443f38baaac93e1 Mon Sep 17 00:00:00 2001 +From: Hanno Zulla +Date: Thu, 23 Aug 2018 17:03:38 +0200 +Subject: [PATCH] HID: hid-bigbenff: driver for BigBen Interactive + PS3OFMINIPAD gamepad + +commit 256a90ed9e46b270bbc4e15ef05216ff049c3721 upstream. + +This is a driver to fix input mapping and add LED & force feedback +support for the "BigBen Interactive Kid-friendly Wired Controller +PS3OFMINIPAD SONY" gamepad with USB id 146b:0902. It was originally +sold as a PS3 accessory and makes a very nice gamepad for Retropie. + +Signed-off-by: Hanno Zulla +Signed-off-by: Jiri Kosina +--- + drivers/hid/Kconfig | 13 ++ + drivers/hid/Makefile | 1 + + drivers/hid/hid-bigbenff.c | 414 +++++++++++++++++++++++++++++++++++++ + drivers/hid/hid-ids.h | 3 + + 4 files changed, 431 insertions(+) + create mode 100644 drivers/hid/hid-bigbenff.c + +--- a/drivers/hid/Kconfig ++++ b/drivers/hid/Kconfig +@@ -182,6 +182,19 @@ config HID_BETOP_FF + Currently the following devices are known to be supported: + - BETOP 2185 PC & BFM MODE + ++config HID_BIGBEN_FF ++ tristate "BigBen Interactive Kids' gamepad support" ++ depends on USB_HID ++ depends on NEW_LEDS ++ depends on LEDS_CLASS ++ select INPUT_FF_MEMLESS ++ default !EXPERT ++ help ++ Support for the "Kid-friendly Wired Controller" PS3OFMINIPAD ++ gamepad made by BigBen Interactive, originally sold as a PS3 ++ accessory. This driver fixes input mapping and adds support for ++ force feedback effects and LEDs on the device. ++ + config HID_CHERRY + tristate "Cherry Cymotion keyboard" + depends on HID +--- a/drivers/hid/Makefile ++++ b/drivers/hid/Makefile +@@ -31,6 +31,7 @@ obj-$(CONFIG_HID_ASUS) += hid-asus.o + obj-$(CONFIG_HID_AUREAL) += hid-aureal.o + obj-$(CONFIG_HID_BELKIN) += hid-belkin.o + obj-$(CONFIG_HID_BETOP_FF) += hid-betopff.o ++obj-$(CONFIG_HID_BIGBEN_FF) += hid-bigbenff.o + obj-$(CONFIG_HID_CHERRY) += hid-cherry.o + obj-$(CONFIG_HID_CHICONY) += hid-chicony.o + obj-$(CONFIG_HID_CMEDIA) += hid-cmedia.o +--- /dev/null ++++ b/drivers/hid/hid-bigbenff.c +@@ -0,0 +1,414 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++ ++/* ++ * LED & force feedback support for BigBen Interactive ++ * ++ * 0x146b:0x0902 "Bigben Interactive Bigben Game Pad" ++ * "Kid-friendly Wired Controller" PS3OFMINIPAD SONY ++ * sold for use with the PS3 ++ * ++ * Copyright (c) 2018 Hanno Zulla ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "hid-ids.h" ++ ++ ++/* ++ * The original descriptor for 0x146b:0x0902 ++ * ++ * 0x05, 0x01, // Usage Page (Generic Desktop Ctrls) ++ * 0x09, 0x05, // Usage (Game Pad) ++ * 0xA1, 0x01, // Collection (Application) ++ * 0x15, 0x00, // Logical Minimum (0) ++ * 0x25, 0x01, // Logical Maximum (1) ++ * 0x35, 0x00, // Physical Minimum (0) ++ * 0x45, 0x01, // Physical Maximum (1) ++ * 0x75, 0x01, // Report Size (1) ++ * 0x95, 0x0D, // Report Count (13) ++ * 0x05, 0x09, // Usage Page (Button) ++ * 0x19, 0x01, // Usage Minimum (0x01) ++ * 0x29, 0x0D, // Usage Maximum (0x0D) ++ * 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) ++ * 0x95, 0x03, // Report Count (3) ++ * 0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) ++ * 0x05, 0x01, // Usage Page (Generic Desktop Ctrls) ++ * 0x25, 0x07, // Logical Maximum (7) ++ * 0x46, 0x3B, 0x01, // Physical Maximum (315) ++ * 0x75, 0x04, // Report Size (4) ++ * 0x95, 0x01, // Report Count (1) ++ * 0x65, 0x14, // Unit (System: English Rotation, Length: Centimeter) ++ * 0x09, 0x39, // Usage (Hat switch) ++ * 0x81, 0x42, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,Null State) ++ * 0x65, 0x00, // Unit (None) ++ * 0x95, 0x01, // Report Count (1) ++ * 0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) ++ * 0x26, 0xFF, 0x00, // Logical Maximum (255) ++ * 0x46, 0xFF, 0x00, // Physical Maximum (255) ++ * 0x09, 0x30, // Usage (X) ++ * 0x09, 0x31, // Usage (Y) ++ * 0x09, 0x32, // Usage (Z) ++ * 0x09, 0x35, // Usage (Rz) ++ * 0x75, 0x08, // Report Size (8) ++ * 0x95, 0x04, // Report Count (4) ++ * 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) ++ * 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) ++ * 0x09, 0x20, // Usage (0x20) ++ * 0x09, 0x21, // Usage (0x21) ++ * 0x09, 0x22, // Usage (0x22) ++ * 0x09, 0x23, // Usage (0x23) ++ * 0x09, 0x24, // Usage (0x24) ++ * 0x09, 0x25, // Usage (0x25) ++ * 0x09, 0x26, // Usage (0x26) ++ * 0x09, 0x27, // Usage (0x27) ++ * 0x09, 0x28, // Usage (0x28) ++ * 0x09, 0x29, // Usage (0x29) ++ * 0x09, 0x2A, // Usage (0x2A) ++ * 0x09, 0x2B, // Usage (0x2B) ++ * 0x95, 0x0C, // Report Count (12) ++ * 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) ++ * 0x0A, 0x21, 0x26, // Usage (0x2621) ++ * 0x95, 0x08, // Report Count (8) ++ * 0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) ++ * 0x0A, 0x21, 0x26, // Usage (0x2621) ++ * 0x91, 0x02, // Output (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) ++ * 0x26, 0xFF, 0x03, // Logical Maximum (1023) ++ * 0x46, 0xFF, 0x03, // Physical Maximum (1023) ++ * 0x09, 0x2C, // Usage (0x2C) ++ * 0x09, 0x2D, // Usage (0x2D) ++ * 0x09, 0x2E, // Usage (0x2E) ++ * 0x09, 0x2F, // Usage (0x2F) ++ * 0x75, 0x10, // Report Size (16) ++ * 0x95, 0x04, // Report Count (4) ++ * 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) ++ * 0xC0, // End Collection ++ */ ++ ++#define PID0902_RDESC_ORIG_SIZE 137 ++ ++/* ++ * The fixed descriptor for 0x146b:0x0902 ++ * ++ * - map buttons according to gamepad.rst ++ * - assign right stick from Z/Rz to Rx/Ry ++ * - map previously unused analog trigger data to Z/RZ ++ * - simplify feature and output descriptor ++ */ ++static __u8 pid0902_rdesc_fixed[] = { ++ 0x05, 0x01, /* Usage Page (Generic Desktop Ctrls) */ ++ 0x09, 0x05, /* Usage (Game Pad) */ ++ 0xA1, 0x01, /* Collection (Application) */ ++ 0x15, 0x00, /* Logical Minimum (0) */ ++ 0x25, 0x01, /* Logical Maximum (1) */ ++ 0x35, 0x00, /* Physical Minimum (0) */ ++ 0x45, 0x01, /* Physical Maximum (1) */ ++ 0x75, 0x01, /* Report Size (1) */ ++ 0x95, 0x0D, /* Report Count (13) */ ++ 0x05, 0x09, /* Usage Page (Button) */ ++ 0x09, 0x05, /* Usage (BTN_WEST) */ ++ 0x09, 0x01, /* Usage (BTN_SOUTH) */ ++ 0x09, 0x02, /* Usage (BTN_EAST) */ ++ 0x09, 0x04, /* Usage (BTN_NORTH) */ ++ 0x09, 0x07, /* Usage (BTN_TL) */ ++ 0x09, 0x08, /* Usage (BTN_TR) */ ++ 0x09, 0x09, /* Usage (BTN_TL2) */ ++ 0x09, 0x0A, /* Usage (BTN_TR2) */ ++ 0x09, 0x0B, /* Usage (BTN_SELECT) */ ++ 0x09, 0x0C, /* Usage (BTN_START) */ ++ 0x09, 0x0E, /* Usage (BTN_THUMBL) */ ++ 0x09, 0x0F, /* Usage (BTN_THUMBR) */ ++ 0x09, 0x0D, /* Usage (BTN_MODE) */ ++ 0x81, 0x02, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) */ ++ 0x75, 0x01, /* Report Size (1) */ ++ 0x95, 0x03, /* Report Count (3) */ ++ 0x81, 0x01, /* Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) */ ++ 0x05, 0x01, /* Usage Page (Generic Desktop Ctrls) */ ++ 0x25, 0x07, /* Logical Maximum (7) */ ++ 0x46, 0x3B, 0x01, /* Physical Maximum (315) */ ++ 0x75, 0x04, /* Report Size (4) */ ++ 0x95, 0x01, /* Report Count (1) */ ++ 0x65, 0x14, /* Unit (System: English Rotation, Length: Centimeter) */ ++ 0x09, 0x39, /* Usage (Hat switch) */ ++ 0x81, 0x42, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,Null State) */ ++ 0x65, 0x00, /* Unit (None) */ ++ 0x95, 0x01, /* Report Count (1) */ ++ 0x81, 0x01, /* Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) */ ++ 0x26, 0xFF, 0x00, /* Logical Maximum (255) */ ++ 0x46, 0xFF, 0x00, /* Physical Maximum (255) */ ++ 0x09, 0x30, /* Usage (X) */ ++ 0x09, 0x31, /* Usage (Y) */ ++ 0x09, 0x33, /* Usage (Rx) */ ++ 0x09, 0x34, /* Usage (Ry) */ ++ 0x75, 0x08, /* Report Size (8) */ ++ 0x95, 0x04, /* Report Count (4) */ ++ 0x81, 0x02, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) */ ++ 0x95, 0x0A, /* Report Count (10) */ ++ 0x81, 0x01, /* Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) */ ++ 0x05, 0x01, /* Usage Page (Generic Desktop Ctrls) */ ++ 0x26, 0xFF, 0x00, /* Logical Maximum (255) */ ++ 0x46, 0xFF, 0x00, /* Physical Maximum (255) */ ++ 0x09, 0x32, /* Usage (Z) */ ++ 0x09, 0x35, /* Usage (Rz) */ ++ 0x95, 0x02, /* Report Count (2) */ ++ 0x81, 0x02, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) */ ++ 0x95, 0x08, /* Report Count (8) */ ++ 0x81, 0x01, /* Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) */ ++ 0x06, 0x00, 0xFF, /* Usage Page (Vendor Defined 0xFF00) */ ++ 0xB1, 0x02, /* Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) */ ++ 0x0A, 0x21, 0x26, /* Usage (0x2621) */ ++ 0x95, 0x08, /* Report Count (8) */ ++ 0x91, 0x02, /* Output (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) */ ++ 0x0A, 0x21, 0x26, /* Usage (0x2621) */ ++ 0x95, 0x08, /* Report Count (8) */ ++ 0x81, 0x02, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) */ ++ 0xC0, /* End Collection */ ++}; ++ ++#define NUM_LEDS 4 ++ ++struct bigben_device { ++ struct hid_device *hid; ++ struct hid_report *report; ++ u8 led_state; /* LED1 = 1 .. LED4 = 8 */ ++ u8 right_motor_on; /* right motor off/on 0/1 */ ++ u8 left_motor_force; /* left motor force 0-255 */ ++ struct led_classdev *leds[NUM_LEDS]; ++ bool work_led; ++ bool work_ff; ++ struct work_struct worker; ++}; ++ ++ ++static void bigben_worker(struct work_struct *work) ++{ ++ struct bigben_device *bigben = container_of(work, ++ struct bigben_device, worker); ++ struct hid_field *report_field = bigben->report->field[0]; ++ ++ if (bigben->work_led) { ++ bigben->work_led = false; ++ report_field->value[0] = 0x01; /* 1 = led message */ ++ report_field->value[1] = 0x08; /* reserved value, always 8 */ ++ report_field->value[2] = bigben->led_state; ++ report_field->value[3] = 0x00; /* padding */ ++ report_field->value[4] = 0x00; /* padding */ ++ report_field->value[5] = 0x00; /* padding */ ++ report_field->value[6] = 0x00; /* padding */ ++ report_field->value[7] = 0x00; /* padding */ ++ hid_hw_request(bigben->hid, bigben->report, HID_REQ_SET_REPORT); ++ } ++ ++ if (bigben->work_ff) { ++ bigben->work_ff = false; ++ report_field->value[0] = 0x02; /* 2 = rumble effect message */ ++ report_field->value[1] = 0x08; /* reserved value, always 8 */ ++ report_field->value[2] = bigben->right_motor_on; ++ report_field->value[3] = bigben->left_motor_force; ++ report_field->value[4] = 0xff; /* duration 0-254 (255 = nonstop) */ ++ report_field->value[5] = 0x00; /* padding */ ++ report_field->value[6] = 0x00; /* padding */ ++ report_field->value[7] = 0x00; /* padding */ ++ hid_hw_request(bigben->hid, bigben->report, HID_REQ_SET_REPORT); ++ } ++} ++ ++static int hid_bigben_play_effect(struct input_dev *dev, void *data, ++ struct ff_effect *effect) ++{ ++ struct bigben_device *bigben = data; ++ u8 right_motor_on; ++ u8 left_motor_force; ++ ++ if (effect->type != FF_RUMBLE) ++ return 0; ++ ++ right_motor_on = effect->u.rumble.weak_magnitude ? 1 : 0; ++ left_motor_force = effect->u.rumble.strong_magnitude / 256; ++ ++ if (right_motor_on != bigben->right_motor_on || ++ left_motor_force != bigben->left_motor_force) { ++ bigben->right_motor_on = right_motor_on; ++ bigben->left_motor_force = left_motor_force; ++ bigben->work_ff = true; ++ schedule_work(&bigben->worker); ++ } ++ ++ return 0; ++} ++ ++static void bigben_set_led(struct led_classdev *led, ++ enum led_brightness value) ++{ ++ struct device *dev = led->dev->parent; ++ struct hid_device *hid = to_hid_device(dev); ++ struct bigben_device *bigben = hid_get_drvdata(hid); ++ int n; ++ bool work; ++ ++ if (!bigben) { ++ hid_err(hid, "no device data\n"); ++ return; ++ } ++ ++ for (n = 0; n < NUM_LEDS; n++) { ++ if (led == bigben->leds[n]) { ++ if (value == LED_OFF) { ++ work = (bigben->led_state & BIT(n)); ++ bigben->led_state &= ~BIT(n); ++ } else { ++ work = !(bigben->led_state & BIT(n)); ++ bigben->led_state |= BIT(n); ++ } ++ ++ if (work) { ++ bigben->work_led = true; ++ schedule_work(&bigben->worker); ++ } ++ return; ++ } ++ } ++} ++ ++static enum led_brightness bigben_get_led(struct led_classdev *led) ++{ ++ struct device *dev = led->dev->parent; ++ struct hid_device *hid = to_hid_device(dev); ++ struct bigben_device *bigben = hid_get_drvdata(hid); ++ int n; ++ ++ if (!bigben) { ++ hid_err(hid, "no device data\n"); ++ return LED_OFF; ++ } ++ ++ for (n = 0; n < NUM_LEDS; n++) { ++ if (led == bigben->leds[n]) ++ return (bigben->led_state & BIT(n)) ? LED_ON : LED_OFF; ++ } ++ ++ return LED_OFF; ++} ++ ++static void bigben_remove(struct hid_device *hid) ++{ ++ struct bigben_device *bigben = hid_get_drvdata(hid); ++ ++ cancel_work_sync(&bigben->worker); ++ hid_hw_close(hid); ++ hid_hw_stop(hid); ++} ++ ++static int bigben_probe(struct hid_device *hid, ++ const struct hid_device_id *id) ++{ ++ struct bigben_device *bigben; ++ struct hid_input *hidinput; ++ struct list_head *report_list; ++ struct led_classdev *led; ++ char *name; ++ size_t name_sz; ++ int n, error; ++ ++ bigben = devm_kzalloc(&hid->dev, sizeof(*bigben), GFP_KERNEL); ++ if (!bigben) ++ return -ENOMEM; ++ hid_set_drvdata(hid, bigben); ++ bigben->hid = hid; ++ ++ error = hid_parse(hid); ++ if (error) { ++ hid_err(hid, "parse failed\n"); ++ return error; ++ } ++ ++ error = hid_hw_start(hid, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF); ++ if (error) { ++ hid_err(hid, "hw start failed\n"); ++ return error; ++ } ++ ++ report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; ++ bigben->report = list_entry(report_list->next, ++ struct hid_report, list); ++ ++ hidinput = list_first_entry(&hid->inputs, struct hid_input, list); ++ set_bit(FF_RUMBLE, hidinput->input->ffbit); ++ ++ INIT_WORK(&bigben->worker, bigben_worker); ++ ++ error = input_ff_create_memless(hidinput->input, bigben, ++ hid_bigben_play_effect); ++ if (error) ++ return error; ++ ++ name_sz = strlen(dev_name(&hid->dev)) + strlen(":red:bigben#") + 1; ++ ++ for (n = 0; n < NUM_LEDS; n++) { ++ led = devm_kzalloc( ++ &hid->dev, ++ sizeof(struct led_classdev) + name_sz, ++ GFP_KERNEL ++ ); ++ if (!led) ++ return -ENOMEM; ++ name = (void *)(&led[1]); ++ snprintf(name, name_sz, ++ "%s:red:bigben%d", ++ dev_name(&hid->dev), n + 1 ++ ); ++ led->name = name; ++ led->brightness = (n == 0) ? LED_ON : LED_OFF; ++ led->max_brightness = 1; ++ led->brightness_get = bigben_get_led; ++ led->brightness_set = bigben_set_led; ++ bigben->leds[n] = led; ++ error = devm_led_classdev_register(&hid->dev, led); ++ if (error) ++ return error; ++ } ++ ++ /* initial state: LED1 is on, no rumble effect */ ++ bigben->led_state = BIT(0); ++ bigben->right_motor_on = 0; ++ bigben->left_motor_force = 0; ++ bigben->work_led = true; ++ bigben->work_ff = true; ++ schedule_work(&bigben->worker); ++ ++ hid_info(hid, "LED and force feedback support for BigBen gamepad\n"); ++ ++ return 0; ++} ++ ++static __u8 *bigben_report_fixup(struct hid_device *hid, __u8 *rdesc, ++ unsigned int *rsize) ++{ ++ if (*rsize == PID0902_RDESC_ORIG_SIZE) { ++ rdesc = pid0902_rdesc_fixed; ++ *rsize = sizeof(pid0902_rdesc_fixed); ++ } else ++ hid_warn(hid, "unexpected rdesc, please submit for review\n"); ++ return rdesc; ++} ++ ++static const struct hid_device_id bigben_devices[] = { ++ { HID_USB_DEVICE(USB_VENDOR_ID_BIGBEN, USB_DEVICE_ID_BIGBEN_PS3OFMINIPAD) }, ++ { } ++}; ++MODULE_DEVICE_TABLE(hid, bigben_devices); ++ ++static struct hid_driver bigben_driver = { ++ .name = "bigben", ++ .id_table = bigben_devices, ++ .probe = bigben_probe, ++ .report_fixup = bigben_report_fixup, ++ .remove = bigben_remove, ++}; ++module_hid_driver(bigben_driver); ++ ++MODULE_LICENSE("GPL"); +--- a/drivers/hid/hid-ids.h ++++ b/drivers/hid/hid-ids.h +@@ -233,6 +233,9 @@ + #define USB_VENDOR_ID_BETOP_2185V2PC 0x8380 + #define USB_VENDOR_ID_BETOP_2185V2BFM 0x20bc + ++#define USB_VENDOR_ID_BIGBEN 0x146b ++#define USB_DEVICE_ID_BIGBEN_PS3OFMINIPAD 0x0902 ++ + #define USB_VENDOR_ID_BTC 0x046e + #define USB_DEVICE_ID_BTC_EMPREX_REMOTE 0x5578 + #define USB_DEVICE_ID_BTC_EMPREX_REMOTE_2 0x5577 diff --git a/target/linux/brcm2708/patches-4.19/950-0155-ASoC-cs4265-Add-a-MIC-pre.-route-2696.patch b/target/linux/brcm2708/patches-4.19/950-0155-ASoC-cs4265-Add-a-MIC-pre.-route-2696.patch new file mode 100644 index 0000000000..8e35113fdc --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0155-ASoC-cs4265-Add-a-MIC-pre.-route-2696.patch @@ -0,0 +1,34 @@ +From f78b69873eb4839dd836b4a681ccce90aa8188f1 Mon Sep 17 00:00:00 2001 +From: Matt Flax +Date: Fri, 28 Sep 2018 15:13:28 +1000 +Subject: [PATCH] ASoC: cs4265: Add a MIC pre. route (#2696) + +Commit b0ef5011b981ece1fde8063243a56d3038b87adb upstream. + +The cs4265 driver is missing a microphone preamp enable. +This patch enables/disables the microphone preamp when mic +selection is made using the kcontrol. + +Signed-off-by: Matt Flax +Reviewed-by: Charles Keepax +Signed-off-by: Mark Brown +--- + sound/soc/codecs/cs4265.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/sound/soc/codecs/cs4265.c ++++ b/sound/soc/codecs/cs4265.c +@@ -222,10 +222,11 @@ static const struct snd_soc_dapm_route c + {"LINEOUTR", NULL, "DAC"}, + {"SPDIFOUT", NULL, "SPDIF"}, + ++ {"Pre-amp MIC", NULL, "MICL"}, ++ {"Pre-amp MIC", NULL, "MICR"}, ++ {"ADC Mux", "MIC", "Pre-amp MIC"}, + {"ADC Mux", "LINEIN", "LINEINL"}, + {"ADC Mux", "LINEIN", "LINEINR"}, +- {"ADC Mux", "MIC", "MICL"}, +- {"ADC Mux", "MIC", "MICR"}, + {"ADC", NULL, "ADC Mux"}, + {"DOUT", NULL, "ADC"}, + {"DAI1 Capture", NULL, "DOUT"}, diff --git a/target/linux/brcm2708/patches-4.19/950-0155-Add-device-tree-overlay-for-HD44780.patch b/target/linux/brcm2708/patches-4.19/950-0155-Add-device-tree-overlay-for-HD44780.patch deleted file mode 100644 index 5d5fd92825..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0155-Add-device-tree-overlay-for-HD44780.patch +++ /dev/null @@ -1,105 +0,0 @@ -From b5ec75dab38af2429278df48121642cb5605e318 Mon Sep 17 00:00:00 2001 -From: Jasper Boomer -Date: Sun, 24 Jun 2018 12:20:27 -0400 -Subject: [PATCH 155/806] Add device tree overlay for HD44780 - ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 25 ++++++++++ - .../boot/dts/overlays/hd44780-lcd-overlay.dts | 46 +++++++++++++++++++ - 3 files changed, 72 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -38,6 +38,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - gpio-no-irq.dtbo \ - gpio-poweroff.dtbo \ - gpio-shutdown.dtbo \ -+ hd44780-lcd.dtbo \ - hifiberry-amp.dtbo \ - hifiberry-dac.dtbo \ - hifiberry-dacplus.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -639,6 +639,31 @@ Params: gpio_pin GPIO pin - external pullup. - - -+Name: hd44780-lcd -+Info: Configures an HD44780 compatible LCD display. Uses 4 gpio pins for -+ data, 2 gpio pins for enable and register select and 1 optional pin -+ for enabling/disabling the backlight display. -+Load: dtoverlay=hd44780-lcd,= -+Params: pin_d4 GPIO pin for data pin D4 (default 6) -+ -+ pin_d5 GPIO pin for data pin D5 (default 13) -+ -+ pin_d6 GPIO pin for data pin D6 (default 19) -+ -+ pin_d7 GPIO pin for data pin D7 (default 26) -+ -+ pin_en GPIO pin for "Enable" (default 21) -+ -+ pin_rs GPIO pin for "Register Select" (default 20) -+ -+ pin_bl Optional pin for enabling/disabling the -+ display backlight. (default disabled) -+ -+ display_height Height of the display in characters -+ -+ display_width Width of the display in characters -+ -+ - Name: hifiberry-amp - Info: Configures the HifiBerry Amp and Amp+ audio cards - Load: dtoverlay=hifiberry-amp ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts -@@ -0,0 +1,46 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ lcd_screen: auxdisplay { -+ compatible = "hit,hd44780"; -+ -+ data-gpios = <&gpio 6 0>, -+ <&gpio 13 0>, -+ <&gpio 19 0>, -+ <&gpio 26 0>; -+ enable-gpios = <&gpio 21 0>; -+ rs-gpios = <&gpio 20 0>; -+ -+ display-height-chars = <2>; -+ display-width-chars = <16>; -+ }; -+ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&lcd_screen>; -+ __dormant__ { -+ backlight-gpios = <&gpio 12 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ pin_d4 = <&lcd_screen>,"data-gpios:4"; -+ pin_d5 = <&lcd_screen>,"data-gpios:16"; -+ pin_d6 = <&lcd_screen>,"data-gpios:28"; -+ pin_d7 = <&lcd_screen>,"data-gpios:40"; -+ pin_en = <&lcd_screen>,"enable-gpios:4"; -+ pin_rs = <&lcd_screen>,"rs-gpios:4"; -+ pin_bl = <0>,"+1", <&lcd_screen>,"backlight-gpios:4"; -+ display_height = <&lcd_screen>,"display-height-chars:0"; -+ display_width = <&lcd_screen>,"display-width-chars:0"; -+ }; -+ -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0156-Update-gpio-fan-overlay.dts-2711.patch b/target/linux/brcm2708/patches-4.19/950-0156-Update-gpio-fan-overlay.dts-2711.patch new file mode 100644 index 0000000000..c8f375942e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0156-Update-gpio-fan-overlay.dts-2711.patch @@ -0,0 +1,72 @@ +From 4a2be174938ac115beac4f07fa8b7ee33406cde8 Mon Sep 17 00:00:00 2001 +From: Paul +Date: Thu, 11 Oct 2018 12:17:20 +0300 +Subject: [PATCH] Update gpio-fan-overlay.dts (#2711) + +Add references, links, clear details, some typo correction. +--- + .../boot/dts/overlays/gpio-fan-overlay.dts | 36 +++++++++++-------- + 1 file changed, 22 insertions(+), 14 deletions(-) + +--- a/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts +@@ -1,29 +1,37 @@ + /* + * Overlay for the Raspberry Pi GPIO Fan @ BCM GPIO12. ++ * References: ++ * - https://www.raspberrypi.org/forums/viewtopic.php?f=107&p=1367135#p1365084 ++ * + * Optional parameters: +- * - "gpiopin" - default GPIO12 +- * - "temp" - default 55000 ++ * - "gpiopin" - BCM number of the pin driving the fan, default 12 (GPIO12); ++ * - "temp" - CPU temperature at which fan is started in millicelsius, default 55000; ++ * + * Requires: +- * - kernel configurations: CONFIG_SENSORS_GPIO_FAN=m and CONFIG_SENSORS_PWM_FAN=m; +- * - kernel rebuid; +- * - DC Fan connected to GPIO via a N-MOSFET (2N7002) ++ * - kernel configurations: CONFIG_SENSORS_GPIO_FAN=m; ++ * - kernel rebuild; ++ * - N-MOSFET connected to gpiopin, 2N7002-[https://en.wikipedia.org/wiki/2N7000]; ++ * - DC Fan connected to N-MOSFET Drain terminal, a 12V fan is working fine and quite silently; ++ * [https://www.tme.eu/en/details/ee40101s1-999-a/dc12v-fans/sunon/ee40101s1-1000u-999/] + * + * ┌─────────────────────┐ + * │Fan negative terminal│ + * └┬────────────────────┘ +- * │ +- * │──┘ ++ * │D ++ * G │──┘ + * [GPIO12]──────┤ │<─┐ 2N7002 + * │──┤ +- * │ ++ * │S + * ─┴─ + * GND + * +- * sudo dtc -W no-unit_address_vs_reg -@ -I dts -O dtb -o /boot/overlays/gpio-fan.dtbo gpio-fan.dts +- * sudo nano /boot/config.txt add "dtoverlay=gpio-fan" or "dtoverlay=gpio-fan,gpiopin=12,temp=45000" +- * or +- * sudo sh -c "echo '\n# Enable PI GPIO-Fan\ndtoverlay=gpio-fan\n' >> /boot/config.txt" +- * sudo sh -c "echo '\n# Enable PI GPIO-Fan\ndtoverlay=gpio-fan,gpiopin=12\n' >> /boot/config.txt" ++ * Build: ++ * - `sudo dtc -W no-unit_address_vs_reg -@ -I dts -O dtb -o /boot/overlays/gpio-fan.dtbo gpio-fan-overlay.dts` ++ * Activate: ++ * - sudo nano /boot/config.txt add "dtoverlay=gpio-fan" or "dtoverlay=gpio-fan,gpiopin=12,temp=45000" ++ * or ++ * - sudo sh -c 'printf "\n# Enable PI GPIO-Fan Default\ndtoverlay=gpio-fan\n" >> /boot/config.txt' ++ * - sudo sh -c 'printf "\n# Enable PI GPIO-Fan Custom\ntoverlay=gpio-fan,gpiopin=12,temp=45000\n" >> /boot/config.txt' + * + */ + /dts-v1/; +@@ -52,7 +60,7 @@ + trips { + cpu_hot: trip-point@0 { + temperature = <55000>; /* (millicelsius) Fan started at 55°C */ +- hysteresis = <5000>; /* (millicelsius) Fan stopped at 50°C */ ++ hysteresis = <10000>; /* (millicelsius) Fan stopped at 45°C */ + type = "active"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0157-drivers-thermal-step_wise-add-support-for-hysteresis.patch b/target/linux/brcm2708/patches-4.19/950-0157-drivers-thermal-step_wise-add-support-for-hysteresis.patch new file mode 100644 index 0000000000..af447c1704 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0157-drivers-thermal-step_wise-add-support-for-hysteresis.patch @@ -0,0 +1,96 @@ +From 05a13bbd7fbb76b4f690042173749a55d85de831 Mon Sep 17 00:00:00 2001 +From: Ram Chandrasekar +Date: Mon, 7 May 2018 11:54:08 -0600 +Subject: [PATCH] drivers: thermal: step_wise: add support for + hysteresis + +From: Ram Chandrasekar + +Step wise governor increases the mitigation level when the temperature +goes above a threshold and will decrease the mitigation when the +temperature falls below the threshold. If it were a case, where the +temperature hovers around a threshold, the mitigation will be applied +and removed at every iteration. This reaction to the temperature is +inefficient for performance. + +The use of hysteresis temperature could avoid this ping-pong of +mitigation by relaxing the mitigation to happen only when the +temperature goes below this lower hysteresis value. + +Signed-off-by: Ram Chandrasekar +Signed-off-by: Lina Iyer +--- + drivers/thermal/step_wise.c | 33 +++++++++++++++++++++++---------- + 1 file changed, 23 insertions(+), 10 deletions(-) + +--- a/drivers/thermal/step_wise.c ++++ b/drivers/thermal/step_wise.c +@@ -36,7 +36,7 @@ + * for this trip point + * d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit + * for this trip point +- * If the temperature is lower than a trip point, ++ * If the temperature is lower than a hysteresis temperature, + * a. if the trend is THERMAL_TREND_RAISING, do nothing + * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling + * state for this trip point, if the cooling state already +@@ -127,7 +127,7 @@ static void update_passive_instance(stru + + static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) + { +- int trip_temp; ++ int trip_temp, hyst_temp; + enum thermal_trip_type trip_type; + enum thermal_trend trend; + struct thermal_instance *instance; +@@ -135,22 +135,23 @@ static void thermal_zone_trip_update(str + int old_target; + + if (trip == THERMAL_TRIPS_NONE) { +- trip_temp = tz->forced_passive; ++ hyst_temp = trip_temp = tz->forced_passive; + trip_type = THERMAL_TRIPS_NONE; + } else { + tz->ops->get_trip_temp(tz, trip, &trip_temp); ++ hyst_temp = trip_temp; ++ if (tz->ops->get_trip_hyst) { ++ tz->ops->get_trip_hyst(tz, trip, &hyst_temp); ++ hyst_temp = trip_temp - hyst_temp; ++ } + tz->ops->get_trip_type(tz, trip, &trip_type); + } + + trend = get_tz_trend(tz, trip); + +- if (tz->temperature >= trip_temp) { +- throttle = true; +- trace_thermal_zone_trip(tz, trip, trip_type); +- } +- +- dev_dbg(&tz->device, "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\n", +- trip, trip_type, trip_temp, trend, throttle); ++ dev_dbg(&tz->device, ++ "Trip%d[type=%d,temp=%d,hyst=%d]:trend=%d,throttle=%d\n", ++ trip, trip_type, trip_temp, hyst_temp, trend, throttle); + + mutex_lock(&tz->lock); + +@@ -159,6 +160,18 @@ static void thermal_zone_trip_update(str + continue; + + old_target = instance->target; ++ throttle = false; ++ /* ++ * Lower the mitigation only if the temperature ++ * goes below the hysteresis temperature. ++ */ ++ if (tz->temperature >= trip_temp || ++ (tz->temperature >= hyst_temp && ++ old_target != THERMAL_NO_TARGET)) { ++ throttle = true; ++ trace_thermal_zone_trip(tz, trip, trip_type); ++ } ++ + instance->target = get_target_state(instance, trend, throttle); + dev_dbg(&instance->cdev->device, "old_target=%d, target=%d\n", + old_target, (int)instance->target); diff --git a/target/linux/brcm2708/patches-4.19/950-0157-overlays-Add-addr-parameter-to-i2c-rtc-gpio.patch b/target/linux/brcm2708/patches-4.19/950-0157-overlays-Add-addr-parameter-to-i2c-rtc-gpio.patch deleted file mode 100644 index 8d8742e251..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0157-overlays-Add-addr-parameter-to-i2c-rtc-gpio.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 20dbf906033167e7c4296eee07437d52627d8ccf Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 9 Jul 2018 21:11:32 +0100 -Subject: [PATCH 157/806] overlays: Add addr parameter to i2c-rtc (& -gpio) - -See: https://github.com/raspberrypi/linux/issues/2611 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 10 +++++++ - .../dts/overlays/i2c-rtc-gpio-overlay.dts | 28 +++++++++++++++++++ - .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 11 ++++++++ - 3 files changed, 49 insertions(+) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -817,6 +817,10 @@ Params: abx80x Select o - - pcf8563 Select the PCF8563 device - -+ addr Sets the address for the RTC. Note that the -+ device must be configured to use the specified -+ address. -+ - trickle-diode-type Diode type for trickle charge - "standard" or - "schottky" (ABx80x only) - -@@ -841,6 +845,8 @@ Params: abx80x Select o - - ds3231 Select the DS3231 device - -+ m41t62 Select the M41T62 device -+ - mcp7940x Select the MCP7940x device - - mcp7941x Select the MCP7941x device -@@ -851,6 +857,10 @@ Params: abx80x Select o - - pcf8563 Select the PCF8563 device - -+ addr Sets the address for the RTC. Note that the -+ device must be configured to use the specified -+ address. -+ - trickle-diode-type Diode type for trickle charge - "standard" or - "schottky" (ABx80x only) - ---- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -@@ -159,6 +159,21 @@ - }; - }; - -+ fragment@10 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ m41t62: m41t62@68 { -+ compatible = "st,m41t62"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ - __overrides__ { - abx80x = <0>,"+1"; - ds1307 = <0>,"+2"; -@@ -169,6 +184,19 @@ - pcf2127 = <0>,"+7"; - pcf8523 = <0>,"+8"; - pcf8563 = <0>,"+9"; -+ m41t62 = <0>,"+10"; -+ -+ addr = <&abx80x>, "reg:0", -+ <&ds1307>, "reg:0", -+ <&ds1339>, "reg:0", -+ <&ds3231>, "reg:0", -+ <&mcp7940x>, "reg:0", -+ <&mcp7941x>, "reg:0", -+ <&pcf2127>, "reg:0", -+ <&pcf8523>, "reg:0", -+ <&pcf8563>, "reg:0", -+ <&m41t62>, "reg:0"; -+ - trickle-diode-type = <&abx80x>,"abracon,tc-diode"; - trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", - <&abx80x>,"abracon,tc-resistor"; ---- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -@@ -169,6 +169,17 @@ - pcf8523 = <0>,"+7"; - pcf8563 = <0>,"+8"; - m41t62 = <0>,"+9"; -+ -+ addr = <&abx80x>, "reg:0", -+ <&ds1307>, "reg:0", -+ <&ds1339>, "reg:0", -+ <&ds3231>, "reg:0", -+ <&mcp7940x>, "reg:0", -+ <&mcp7941x>, "reg:0", -+ <&pcf2127>, "reg:0", -+ <&pcf8523>, "reg:0", -+ <&pcf8563>, "reg:0", -+ <&m41t62>, "reg:0"; - trickle-diode-type = <&abx80x>,"abracon,tc-diode"; - trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", - <&abx80x>,"abracon,tc-resistor"; diff --git a/target/linux/brcm2708/patches-4.19/950-0158-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch b/target/linux/brcm2708/patches-4.19/950-0158-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch deleted file mode 100644 index 7875a374b3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0158-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 8a9c6862c6010b4500cb08c62ac4aea6897cf485 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 9 Mar 2018 14:24:05 -0800 -Subject: [PATCH 158/806] ARM: BCM270X: Add the 18-bit DPI pinmux to the RPI - DTs. - -This doesn't do anything by default, but trying to put the node in an -overlay failed for me. - -Signed-off-by: Eric Anholt ---- - arch/arm/boot/dts/bcm270x.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -19,6 +19,13 @@ - - gpio@7e200000 { /* gpio */ - interrupts = <2 17>, <2 18>; -+ -+ dpi_18bit_gpio0: dpi_18bit_gpio0 { -+ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 -+ 12 13 14 15 16 17 18 19 -+ 20 21>; -+ brcm,function = ; -+ }; - }; - - serial@7e201000 { /* uart0 */ diff --git a/target/linux/brcm2708/patches-4.19/950-0158-drivers-thermal-step_wise-avoid-throttling-at-hyster.patch b/target/linux/brcm2708/patches-4.19/950-0158-drivers-thermal-step_wise-avoid-throttling-at-hyster.patch new file mode 100644 index 0000000000..8547b4fdde --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0158-drivers-thermal-step_wise-avoid-throttling-at-hyster.patch @@ -0,0 +1,22 @@ +From c7c358c1ac991887b6d2c9193139f9f35a36e985 Mon Sep 17 00:00:00 2001 +From: Serge Schneider +Date: Tue, 2 Oct 2018 11:14:15 +0100 +Subject: [PATCH] drivers: thermal: step_wise: avoid throttling at + hysteresis temperature after dropping below it + +Signed-off-by: Serge Schneider +--- + drivers/thermal/step_wise.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/thermal/step_wise.c ++++ b/drivers/thermal/step_wise.c +@@ -167,7 +167,7 @@ static void thermal_zone_trip_update(str + */ + if (tz->temperature >= trip_temp || + (tz->temperature >= hyst_temp && +- old_target != THERMAL_NO_TARGET)) { ++ old_target == instance->upper)) { + throttle = true; + trace_thermal_zone_trip(tz, trip, trip_type); + } diff --git a/target/linux/brcm2708/patches-4.19/950-0159-hwmon-adjust-rpi-poe-fan-overlay-trip-points.patch b/target/linux/brcm2708/patches-4.19/950-0159-hwmon-adjust-rpi-poe-fan-overlay-trip-points.patch new file mode 100644 index 0000000000..ae35e8b7db --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0159-hwmon-adjust-rpi-poe-fan-overlay-trip-points.patch @@ -0,0 +1,67 @@ +From 018b90a28a06e351dc67db043e9889eeed33120c Mon Sep 17 00:00:00 2001 +From: Serge Schneider +Date: Wed, 26 Sep 2018 19:44:59 +0100 +Subject: [PATCH] hwmon: adjust rpi-poe-fan overlay trip points + +Signed-off-by: Serge Schneider +--- + .../arm/boot/dts/overlays/rpi-poe-overlay.dts | 26 +++++++------------ + 1 file changed, 9 insertions(+), 17 deletions(-) + +--- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts +@@ -14,9 +14,9 @@ + compatible = "raspberrypi,rpi-poe-fan"; + firmware = <&firmware>; + cooling-min-state = <0>; +- cooling-max-state = <3>; ++ cooling-max-state = <2>; + #cooling-cells = <2>; +- cooling-levels = <0 50 150 255>; ++ cooling-levels = <0 150 255>; + status = "okay"; + }; + }; +@@ -26,35 +26,27 @@ + target = <&cpu_thermal>; + __overlay__ { + trips { +- threshold: trip-point@0 { +- temperature = <45000>; +- hysteresis = <5000>; +- type = "active"; +- }; +- target: trip-point@1 { ++ trip0: trip0 { + temperature = <50000>; +- hysteresis = <2000>; ++ hysteresis = <5000>; + type = "active"; + }; +- cpu_hot: cpu_hot@0 { ++ trip1: trip1 { ++ + temperature = <55000>; +- hysteresis = <2000>; ++ hysteresis = <5000>; + type = "active"; + }; + }; + cooling-maps { + map0 { +- trip = <&threshold>; ++ trip = <&trip0>; + cooling-device = <&fan0 0 1>; + }; + map1 { +- trip = <&target>; ++ trip = <&trip1>; + cooling-device = <&fan0 1 2>; + }; +- map2 { +- trip = <&cpu_hot>; +- cooling-device = <&fan0 2 3>; +- }; + }; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0159-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch b/target/linux/brcm2708/patches-4.19/950-0159-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch deleted file mode 100644 index 775a69ee7f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0159-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 467e9cb87261c27b6c70ec714ae3cb58b48d0f6b Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 9 Mar 2018 13:20:21 -0800 -Subject: [PATCH 159/806] overlays: Add an overlay for the Adafruit Kippah with - their 7" panel - -Signed-off-by: Eric Anholt ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 7 +++ - .../overlays/vc4-kms-kippah-7inch-overlay.dts | 43 +++++++++++++++++++ - 3 files changed, 51 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -134,6 +134,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - upstream.dtbo \ - upstream-aux-interrupt.dtbo \ - vc4-fkms-v3d.dtbo \ -+ vc4-kms-kippah-7inch.dtbo \ - vc4-kms-v3d.dtbo \ - vga666.dtbo \ - w1-gpio.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1920,6 +1920,13 @@ Params: cma-256 CMA is 2 - cma-64 CMA is 64MB, 64MB-aligned - - -+Name: vc4-kms-kippah-7inch -+Info: Enable the Adafruit DPI Kippah with the 7" Ontat panel attached. -+ Requires vc4-kms-v3d to be loaded. -+Load: dtoverlay=vc4-kms-kippah-7inch -+Params: -+ -+ - Name: vc4-kms-v3d - Info: Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or - booting to GUI while this overlay is in use will cause interesting ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts -@@ -0,0 +1,43 @@ -+/* -+ * vc4-kms-v3d-overlay.dts -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+#include -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ panel: panel { -+ compatible = "ontat,yx700wv03", "simple-panel"; -+ -+ port { -+ panel_in: endpoint { -+ remote-endpoint = <&dpi_out>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&dpi>; -+ __overlay__ { -+ status = "okay"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi_18bit_gpio0>; -+ -+ port { -+ dpi_out: endpoint@0 { -+ remote-endpoint = <&panel_in>; -+ }; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0160-overlays-Remove-stale-notes-about-vc4-s-CMA-alignmen.patch b/target/linux/brcm2708/patches-4.19/950-0160-overlays-Remove-stale-notes-about-vc4-s-CMA-alignmen.patch deleted file mode 100644 index 6a97f4dec9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0160-overlays-Remove-stale-notes-about-vc4-s-CMA-alignmen.patch +++ /dev/null @@ -1,51 +0,0 @@ -From a90677b7610230ed88bd1866684e05ac2a0321f6 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 9 Mar 2018 13:26:33 -0800 -Subject: [PATCH 160/806] overlays: Remove stale notes about vc4's CMA - alignment in the README. - -We haven't needed alignment since -553c942f8b2cbc7394b4d4fa2f848b23a8f07451, and the current overlays -don't specify any. - -Signed-off-by: Eric Anholt ---- - arch/arm/boot/dts/overlays/README | 20 ++++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1913,11 +1913,11 @@ Name: vc4-fkms-v3d - Info: Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx - display stack. - Load: dtoverlay=vc4-fkms-v3d, --Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) -- cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) -- cma-128 CMA is 128MB, 128MB-aligned -- cma-96 CMA is 96MB, 128MB-aligned -- cma-64 CMA is 64MB, 64MB-aligned -+Params: cma-256 CMA is 256MB (needs 1GB) -+ cma-192 CMA is 192MB (needs 1GB) -+ cma-128 CMA is 128MB -+ cma-96 CMA is 96MB -+ cma-64 CMA is 64MB - - - Name: vc4-kms-kippah-7inch -@@ -1932,11 +1932,11 @@ Info: Enable Eric Anholt's DRM VC4 HDM - booting to GUI while this overlay is in use will cause interesting - lockups. - Load: dtoverlay=vc4-kms-v3d, --Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) -- cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) -- cma-128 CMA is 128MB, 128MB-aligned -- cma-96 CMA is 96MB, 128MB-aligned -- cma-64 CMA is 64MB, 64MB-aligned -+Params: cma-256 CMA is 256MB (needs 1GB) -+ cma-192 CMA is 192MB (needs 1GB) -+ cma-128 CMA is 128MB -+ cma-96 CMA is 96MB -+ cma-64 CMA is 64MB - - - Name: vga666 diff --git a/target/linux/brcm2708/patches-4.19/950-0160-overlays-add-overrides-for-PoE-HAT-fan-control.patch b/target/linux/brcm2708/patches-4.19/950-0160-overlays-add-overrides-for-PoE-HAT-fan-control.patch new file mode 100644 index 0000000000..0ea76db503 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0160-overlays-add-overrides-for-PoE-HAT-fan-control.patch @@ -0,0 +1,50 @@ +From a6593a1bc8708f73c424c05c64d49d3868e1bdd5 Mon Sep 17 00:00:00 2001 +From: Serge Schneider +Date: Tue, 2 Oct 2018 17:13:48 +0100 +Subject: [PATCH] overlays: add overrides for PoE HAT fan control + +Signed-off-by: Serge Schneider +--- + arch/arm/boot/dts/overlays/README | 13 ++++++++++--- + arch/arm/boot/dts/overlays/rpi-poe-overlay.dts | 10 ++++++++++ + 2 files changed, 20 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1565,9 +1565,16 @@ Params: touchscreen-size-x Touchscr + + + Name: rpi-poe +-Info: Raspberry Pi POE HAT +-Load: dtoverlay=rpi-poe +-Params: ++Info: Raspberry Pi PoE HAT fan ++Load: dtoverlay=rpi-poe,[=] ++Params: poe_fan_temp0 Temperature (in millicelcius) at which the fan ++ turns on (default 50000) ++ poe_fan_temp0_hyst Temperature delta (in millicelcius) at which ++ the fan turns off (default 5000) ++ poe_fan_temp1 Temperature (in millicelcius) at which the fan ++ speeds up (default 55000) ++ poe_fan_temp1_hyst Temperature delta (in millicelcius) at which ++ the fan slows down (default 5000) + + + Name: rpi-proto +--- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts +@@ -50,4 +50,14 @@ + }; + }; + }; ++ ++ fragment@2 { ++ target-path = "/__overrides__"; ++ __overlay__ { ++ poe_fan_temp0 = <&trip0>,"temperature:0"; ++ poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; ++ poe_fan_temp1 = <&trip1>,"temperature:0"; ++ poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; ++ }; ++ }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0161-overlays-Add-gpio-no-bank0-irq-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0161-overlays-Add-gpio-no-bank0-irq-overlay.patch new file mode 100644 index 0000000000..7a93d2fd23 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0161-overlays-Add-gpio-no-bank0-irq-overlay.patch @@ -0,0 +1,60 @@ +From afe88750090d60d94b365250968e116ec88448c1 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 18 Jul 2018 17:25:00 +0100 +Subject: [PATCH] overlays: Add gpio-no-bank0-irq overlay + +See: https://github.com/raspberrypi/linux/issues/2590 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 9 +++++++++ + .../dts/overlays/gpio-no-bank0-irq-overlay.dts | 14 ++++++++++++++ + 3 files changed, 24 insertions(+) + create mode 100755 arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -37,6 +37,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + gpio-ir.dtbo \ + gpio-ir-tx.dtbo \ + gpio-key.dtbo \ ++ gpio-no-bank0-irq.dtbo \ + gpio-no-irq.dtbo \ + gpio-poweroff.dtbo \ + gpio-shutdown.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -597,6 +597,15 @@ Params: gpio GPIO pin + keycode Set the key code for the button + + ++Name: gpio-no-bank0-irq ++Info: Use this overlay to disable GPIO interrupts for GPIOs in bank 0 (0-27), ++ which can be useful for UIO drivers. ++ N.B. Using this overlay will trigger a kernel WARN during booting, but ++ this can safely be ignored - the system should work as expected. ++Load: dtoverlay=gpio-no-bank0-irq ++Params: ++ ++ + Name: gpio-no-irq + Info: Use this overlay to disable all GPIO interrupts, which can be useful + for user-space GPIO edge detection systems. +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts +@@ -0,0 +1,14 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ // Configure the gpio pin controller ++ target = <&gpio>; ++ __overlay__ { ++ interrupts = <255 255>, <2 18>; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0161-spi-Make-GPIO-CSs-honour-the-SPI_NO_CS-flag.patch b/target/linux/brcm2708/patches-4.19/950-0161-spi-Make-GPIO-CSs-honour-the-SPI_NO_CS-flag.patch deleted file mode 100644 index 05b255dc8c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0161-spi-Make-GPIO-CSs-honour-the-SPI_NO_CS-flag.patch +++ /dev/null @@ -1,32 +0,0 @@ -From d7aa9d52b7f9b2d600f9b2479767c24d438a2c68 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 3 Jul 2018 14:23:47 +0100 -Subject: [PATCH 161/806] spi: Make GPIO CSs honour the SPI_NO_CS flag - -The SPI configuration state includes an SPI_NO_CS flag that disables -all CS line manipulation, for applications that want to manage their -own chip selects. However, this flag is ignored by the GPIO CS code -in the SPI framework. - -Correct this omission with a trivial patch. - -See: https://github.com/raspberrypi/linux/issues/2169 - -Signed-off-by: Phil Elwell ---- - drivers/spi/spi.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/spi/spi.c -+++ b/drivers/spi/spi.c -@@ -733,7 +733,9 @@ static void spi_set_cs(struct spi_device - enable = !enable; - - if (gpio_is_valid(spi->cs_gpio)) { -- gpio_set_value_cansleep(spi->cs_gpio, !enable); -+ /* Honour the SPI_NO_CS flag */ -+ if (!(spi->mode & SPI_NO_CS)) -+ gpio_set_value_cansleep(spi->cs_gpio, !enable); - /* Some SPI masters need both GPIO CS & slave_select */ - if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && - spi->controller->set_cs) diff --git a/target/linux/brcm2708/patches-4.19/950-0162-Add-hy28b-2017-model-device-tree-overlay-2721.patch b/target/linux/brcm2708/patches-4.19/950-0162-Add-hy28b-2017-model-device-tree-overlay-2721.patch new file mode 100644 index 0000000000..2c0493777b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0162-Add-hy28b-2017-model-device-tree-overlay-2721.patch @@ -0,0 +1,209 @@ +From a64595c1bc19752dca712c6cd90692a2a0e7397b Mon Sep 17 00:00:00 2001 +From: Hans-Wilhelm Warlo <5417271+hanswilw@users.noreply.github.com> +Date: Tue, 16 Oct 2018 18:20:48 +0200 +Subject: [PATCH] Add hy28b 2017 model device tree overlay (#2721) + +The 2017 version of the hy28b display requires a different +initialisation sequence. + +Signed-off-by: Hans-Wilhelm Warlo +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 19 +++ + .../boot/dts/overlays/hy28b-2017-overlay.dts | 152 ++++++++++++++++++ + 3 files changed, 172 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -49,6 +49,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + hifiberry-digi-pro.dtbo \ + hy28a.dtbo \ + hy28b.dtbo \ ++ hy28b-2017.dtbo \ + i2c-bcm2708.dtbo \ + i2c-gpio.dtbo \ + i2c-mux.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -770,6 +770,25 @@ Params: speed Display + ledgpio GPIO used to control backlight + + ++Name: hy28b-2017 ++Info: HY28B 2017 version - 2.8" TFT LCD Display Module by HAOYU Electronics ++ Default values match Texy's display shield ++Load: dtoverlay=hy28b-2017,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ resetgpio GPIO used to reset controller ++ ++ ledgpio GPIO used to control backlight ++ ++ + Name: i2c-bcm2708 + Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus. + Load: dtoverlay=i2c-bcm2708 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts +@@ -0,0 +1,152 @@ ++/* ++ * Device Tree overlay for HY28b display shield by Texy. ++ * Modified for 2017 version with ILI9325 D chip ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ hy28b_pins: hy28b_pins { ++ brcm,pins = <17 25 18>; ++ brcm,function = <0 1 1>; /* in out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ hy28b: hy28b@0{ ++ compatible = "ilitek,ili9325"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hy28b_pins>; ++ ++ spi-max-frequency = <48000000>; ++ spi-cpol; ++ spi-cpha; ++ rotate = <270>; ++ bgr; ++ fps = <50>; ++ buswidth = <8>; ++ startbyte = <0x70>; ++ reset-gpios = <&gpio 25 0>; ++ led-gpios = <&gpio 18 1>; ++ ++ init = <0x10000e5 0x78F0 ++ 0x1000001 0x0100 ++ 0x1000002 0x0700 ++ 0x1000003 0x1030 ++ 0x1000004 0x0000 ++ 0x1000008 0x0207 ++ 0x1000009 0x0000 ++ 0x100000a 0x0000 ++ 0x100000c 0x0000 ++ 0x100000d 0x0000 ++ 0x100000f 0x0000 ++ 0x1000010 0x0000 ++ 0x1000011 0x0007 ++ 0x1000012 0x0000 ++ 0x1000013 0x0000 ++ 0x1000007 0x0001 ++ 0x2000032 ++ 0x2000032 ++ 0x2000032 ++ 0x2000032 ++ 0x1000010 0x1090 ++ 0x1000011 0x0227 ++ 0x2000032 ++ 0x1000012 0x001f ++ 0x2000032 ++ 0x1000013 0x1500 ++ 0x1000029 0x0027 ++ 0x100002b 0x000d ++ 0x2000032 ++ 0x1000020 0x0000 ++ 0x1000021 0x0000 ++ 0x2000032 ++ 0x1000030 0x0000 ++ 0x1000031 0x0707 ++ 0x1000032 0x0307 ++ 0x1000035 0x0200 ++ 0x1000036 0x0008 ++ 0x1000037 0x0004 ++ 0x1000038 0x0000 ++ 0x1000039 0x0707 ++ 0x100003c 0x0002 ++ 0x100003d 0x1d04 ++ 0x1000050 0x0000 ++ 0x1000051 0x00ef ++ 0x1000052 0x0000 ++ 0x1000053 0x013f ++ 0x1000060 0xa700 ++ 0x1000061 0x0001 ++ 0x100006a 0x0000 ++ 0x1000080 0x0000 ++ 0x1000081 0x0000 ++ 0x1000082 0x0000 ++ 0x1000083 0x0000 ++ 0x1000084 0x0000 ++ 0x1000085 0x0000 ++ 0x1000090 0x0010 ++ 0x1000092 0x0600 ++ 0x1000007 0x0133>; ++ debug = <0>; ++ }; ++ ++ hy28b_ts: hy28b-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <17 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 17 0>; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&hy28b>,"spi-max-frequency:0"; ++ rotate = <&hy28b>,"rotate:0"; ++ fps = <&hy28b>,"fps:0"; ++ debug = <&hy28b>,"debug:0"; ++ xohms = <&hy28b_ts>,"ti,x-plate-ohms;0"; ++ resetgpio = <&hy28b>,"reset-gpios:4", ++ <&hy28b_pins>, "brcm,pins:4"; ++ ledgpio = <&hy28b>,"led-gpios:4", ++ <&hy28b_pins>, "brcm,pins:8"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0162-devicetree-add-RPi-CM3-dts-to-arm64-mimic-the-RPi-3B.patch b/target/linux/brcm2708/patches-4.19/950-0162-devicetree-add-RPi-CM3-dts-to-arm64-mimic-the-RPi-3B.patch deleted file mode 100644 index 2ab50965bc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0162-devicetree-add-RPi-CM3-dts-to-arm64-mimic-the-RPi-3B.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 120cbbc17c917790fe523ee67a32e877e5592b93 Mon Sep 17 00:00:00 2001 -From: Steve Pavao -Date: Fri, 10 Aug 2018 17:09:50 -0400 -Subject: [PATCH 162/806] devicetree: add RPi CM3 dts to arm64; mimic the RPi - 3B arm64 dts implementation, by referring to the actual dts file in the arm - directory - ---- - arch/arm64/boot/dts/broadcom/Makefile | 2 ++ - arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts | 3 +++ - 2 files changed, 5 insertions(+) - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts - ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -4,6 +4,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp - dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb -+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb - - subdir-y += northstar2 - subdir-y += stingray ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2710-rpi-cm3.dts" diff --git a/target/linux/brcm2708/patches-4.19/950-0163-Add-support-for-audioinjector.net-ultra-soundcard.-2.patch b/target/linux/brcm2708/patches-4.19/950-0163-Add-support-for-audioinjector.net-ultra-soundcard.-2.patch deleted file mode 100644 index 8e5f84efdc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0163-Add-support-for-audioinjector.net-ultra-soundcard.-2.patch +++ /dev/null @@ -1,119 +0,0 @@ -From e2516e3a7d2244f74c3267be8bdc143448c278be Mon Sep 17 00:00:00 2001 -From: Matt Flax -Date: Tue, 28 Aug 2018 18:42:13 +1000 -Subject: [PATCH 163/806] Add support for audioinjector.net ultra soundcard. - (#2664) - -Uses the simple-audio-card ALSA machine driver. Sets up the machine -driver in the device tree overlay file. The overlays/Makefile is -altered to add the audioinjector-ultra.dtbo dtb overlay. - -Adds CONFIG_SND_SOC_CS4265 to the defconfig files. - -Signed-off-by: Matt Flax ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 ++ - .../overlays/audioinjector-ultra-overlay.dts | 71 +++++++++++++++++++ - 5 files changed, 80 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -15,6 +15,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - applepi-dac.dtbo \ - at86rf233.dtbo \ - audioinjector-addons.dtbo \ -+ audioinjector-ultra.dtbo \ - audioinjector-wm8731-audio.dtbo \ - audremap.dtbo \ - balena-fin.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -389,6 +389,12 @@ Params: non-stop-clocks Keeps th - is paused or stopped (default off) - - -+Name: audioinjector-ultra -+Info: Configures the audioinjector.net ultra soundcard -+Load: dtoverlay=audioinjector-ultra -+Params: -+ -+ - Name: audioinjector-wm8731-audio - Info: Configures the audioinjector.net audio add on soundcard - Load: dtoverlay=audioinjector-wm8731-audio ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts -@@ -0,0 +1,71 @@ -+// Definitions for audioinjector.net audio add on soundcard -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ cs4265: cs4265@4e { -+ #sound-dai-cells = <0>; -+ compatible = "cirrus,cs4265"; -+ reg = <0x4e>; -+ reset-gpios = <&gpio 5 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "simple-audio-card"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ simple-audio-card,name = "audioinjector-ultra"; -+ -+ simple-audio-card,widgets = -+ "Line", "OUTPUTS", -+ "Line", "INPUTS"; -+ -+ simple-audio-card,routing = -+ "OUTPUTS","LINEOUTL", -+ "OUTPUTS","LINEOUTR", -+ "OUTPUTS","SPDIFOUT", -+ "LINEINL","INPUTS", -+ "LINEINR","INPUTS", -+ "MICL","INPUTS", -+ "MICR","INPUTS"; -+ -+ simple-audio-card,format = "i2s"; -+ -+ simple-audio-card,bitclock-master = <&sound_master>; -+ simple-audio-card,frame-master = <&sound_master>; -+ -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ dai-tdm-slot-num = <2>; -+ dai-tdm-slot-width = <32>; -+ }; -+ -+ sound_master: simple-audio-card,codec { -+ sound-dai = <&cs4265>; -+ system-clock-frequency = <12288000>; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0163-mmc-bcm2835-sdhost-Recover-from-MMC_SEND_EXT_CSD.patch b/target/linux/brcm2708/patches-4.19/950-0163-mmc-bcm2835-sdhost-Recover-from-MMC_SEND_EXT_CSD.patch new file mode 100644 index 0000000000..c6a9e355c5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0163-mmc-bcm2835-sdhost-Recover-from-MMC_SEND_EXT_CSD.patch @@ -0,0 +1,50 @@ +From 5010dba0e3f6f2c9d623e265276d9b6993fa96b0 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 26 Oct 2018 17:29:51 +0100 +Subject: [PATCH] mmc/bcm2835-sdhost: Recover from MMC_SEND_EXT_CSD + +If the user issues an "mmc extcsd read", the SD controller receives +what it thinks is a SEND_IF_COND command with an unexpected data block. +The resulting operations leave the FSM stuck in READWAIT, a state which +persists until the MMC framework resets the controller, by which point +the root filesystem is likely to have been unmounted. + +A less heavyweight solution is to detect the condition and nudge the +FSM by asserting the (self-clearing) FORCE_DATA_MODE bit. + +N.B. This workaround was essentially discovered by accident and without +a full understanding the inner workings of the controller, so it is +fortunate that the "fix" only modifies error paths. + +See: https://github.com/raspberrypi/linux/issues/2728 + +Signed-off-by: Phil Elwell +--- + drivers/mmc/host/bcm2835-sdhost.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/mmc/host/bcm2835-sdhost.c ++++ b/drivers/mmc/host/bcm2835-sdhost.c +@@ -1244,6 +1244,8 @@ static void bcm2835_sdhost_finish_comman + pr_info("%s: ignoring CRC7 error for CMD1\n", + mmc_hostname(host->mmc)); + } else { ++ u32 edm, fsm; ++ + if (sdhsts & SDHSTS_CMD_TIME_OUT) { + if (host->debug) + pr_warn("%s: command %d timeout\n", +@@ -1256,6 +1258,13 @@ static void bcm2835_sdhost_finish_comman + host->cmd->opcode); + host->cmd->error = -EILSEQ; + } ++ ++ edm = readl(host->ioaddr + SDEDM); ++ fsm = edm & SDEDM_FSM_MASK; ++ if (fsm == SDEDM_FSM_READWAIT || ++ fsm == SDEDM_FSM_WRITESTART1) ++ writel(edm | SDEDM_FORCE_DATA_MODE, ++ host->ioaddr + SDEDM); + tasklet_schedule(&host->finish_tasklet); + return; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0164-ASoC-cs4265-Add-a-S-PDIF-enable-switch.patch b/target/linux/brcm2708/patches-4.19/950-0164-ASoC-cs4265-Add-a-S-PDIF-enable-switch.patch deleted file mode 100644 index b8c17b83fc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0164-ASoC-cs4265-Add-a-S-PDIF-enable-switch.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 92d32a3a11bc8c290370ba37bf792996ce3da8bc Mon Sep 17 00:00:00 2001 -From: Matt Flax -Date: Thu, 30 Aug 2018 09:38:02 +1000 -Subject: [PATCH 164/806] ASoC: cs4265: Add a S/PDIF enable switch - -commit f853d6b3ba345297974d877d8ed0f4a91eaca739 upstream. - -This patch adds a S/PDIF enable switch as a SOC_SINGLE. - -Signed-off-by: Matt Flax -Reviewed-by: Charles Keepax -Signed-off-by: Mark Brown ---- - sound/soc/codecs/cs4265.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/sound/soc/codecs/cs4265.c -+++ b/sound/soc/codecs/cs4265.c -@@ -154,6 +154,7 @@ static const struct snd_kcontrol_new cs4 - SOC_SINGLE("E to F Buffer Disable Switch", CS4265_SPDIF_CTL1, - 6, 1, 0), - SOC_ENUM("C Data Access", cam_mode_enum), -+ SOC_SINGLE("SPDIF Switch", CS4265_SPDIF_CTL2, 5, 1, 1), - SOC_SINGLE("Validity Bit Control Switch", CS4265_SPDIF_CTL2, - 3, 1, 0), - SOC_ENUM("SPDIF Mono/Stereo", spdif_mono_stereo_enum), diff --git a/target/linux/brcm2708/patches-4.19/950-0164-overlays-pi3-disable-bt-Clear-out-bt_pins-node.patch b/target/linux/brcm2708/patches-4.19/950-0164-overlays-pi3-disable-bt-Clear-out-bt_pins-node.patch new file mode 100644 index 0000000000..c7c4fa86df --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0164-overlays-pi3-disable-bt-Clear-out-bt_pins-node.patch @@ -0,0 +1,33 @@ +From c0c9a631e7ca58cc31aafb14920c559552d3b810 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 29 Oct 2018 10:38:31 +0000 +Subject: [PATCH] overlays: pi3-disable-bt: Clear out bt_pins node + +The pi3-disable-bt overlay does not (and cannot) delete the bt_pins +node, but emptying its properties (including brcm,pins) is a way of +signalling to the hciuart systemd service that Bluetooth has been +disabled. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts +@@ -37,6 +37,15 @@ + }; + + fragment@3 { ++ target = <&bt_pins>; ++ __overlay__ { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ }; ++ ++ fragment@4 { + target-path = "/aliases"; + __overlay__ { + serial0 = "/soc/serial@7e201000"; diff --git a/target/linux/brcm2708/patches-4.19/950-0165-ASoC-cs4265-Add-native-32bit-I2S-transport.patch b/target/linux/brcm2708/patches-4.19/950-0165-ASoC-cs4265-Add-native-32bit-I2S-transport.patch deleted file mode 100644 index 8e32928cf9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0165-ASoC-cs4265-Add-native-32bit-I2S-transport.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 8b81eec1fab393a4f0df4a77788aaaccb39e55dd Mon Sep 17 00:00:00 2001 -From: Matt Flax -Date: Thu, 30 Aug 2018 09:38:01 +1000 -Subject: [PATCH 165/806] ASoC: cs4265: Add native 32bit I2S transport - -commit be47e75eb1419ffc1d9c26230963fd5fa3055097 upstream. - -The cs4265 uses 32 bit transport on the I2S bus. This patch enables native -32 bit mode for machine drivers which use this sound card driver. - -Signed-off-by: Matt Flax -Reviewed-by: Charles Keepax -Signed-off-by: Mark Brown ---- - sound/soc/codecs/cs4265.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/sound/soc/codecs/cs4265.c -+++ b/sound/soc/codecs/cs4265.c -@@ -497,7 +497,8 @@ static int cs4265_set_bias_level(struct - SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000) - - #define CS4265_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \ -- SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_U24_LE) -+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_U24_LE | \ -+ SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE) - - static const struct snd_soc_dai_ops cs4265_ops = { - .hw_params = cs4265_pcm_hw_params, diff --git a/target/linux/brcm2708/patches-4.19/950-0165-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch b/target/linux/brcm2708/patches-4.19/950-0165-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch new file mode 100644 index 0000000000..b9a4f52e5a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0165-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch @@ -0,0 +1,56 @@ +From 0557d41d861b8c214b3472749482efdc71363dbb Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 29 Oct 2018 14:45:45 +0000 +Subject: [PATCH] Revert "rtc: pcf8523: properly handle oscillator stop + bit" + +This reverts commit ede44c908d44b166a5b6bd7caacd105c2ff5a70f. + +See: https://github.com/raspberrypi/firmware/issues/1065 + +Signed-off-by: Phil Elwell +--- + drivers/rtc/rtc-pcf8523.c | 25 ++++++++++++++++++++++--- + 1 file changed, 22 insertions(+), 3 deletions(-) + +--- a/drivers/rtc/rtc-pcf8523.c ++++ b/drivers/rtc/rtc-pcf8523.c +@@ -212,8 +212,28 @@ static int pcf8523_rtc_read_time(struct + if (err < 0) + return err; + +- if (regs[0] & REG_SECONDS_OS) +- return -EINVAL; ++ if (regs[0] & REG_SECONDS_OS) { ++ /* ++ * If the oscillator was stopped, try to clear the flag. Upon ++ * power-up the flag is always set, but if we cannot clear it ++ * the oscillator isn't running properly for some reason. The ++ * sensible thing therefore is to return an error, signalling ++ * that the clock cannot be assumed to be correct. ++ */ ++ ++ regs[0] &= ~REG_SECONDS_OS; ++ ++ err = pcf8523_write(client, REG_SECONDS, regs[0]); ++ if (err < 0) ++ return err; ++ ++ err = pcf8523_read(client, REG_SECONDS, ®s[0]); ++ if (err < 0) ++ return err; ++ ++ if (regs[0] & REG_SECONDS_OS) ++ return -EAGAIN; ++ } + + tm->tm_sec = bcd2bin(regs[0] & 0x7f); + tm->tm_min = bcd2bin(regs[1] & 0x7f); +@@ -249,7 +269,6 @@ static int pcf8523_rtc_set_time(struct d + return err; + + regs[0] = REG_SECONDS; +- /* This will purposely overwrite REG_SECONDS_OS */ + regs[1] = bin2bcd(tm->tm_sec); + regs[2] = bin2bcd(tm->tm_min); + regs[3] = bin2bcd(tm->tm_hour); diff --git a/target/linux/brcm2708/patches-4.19/950-0166-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch b/target/linux/brcm2708/patches-4.19/950-0166-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch new file mode 100644 index 0000000000..6e81c149d8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0166-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch @@ -0,0 +1,42 @@ +From 627f981e148bb9f7dc01df97fa20fe6124f417f7 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 7 Nov 2018 17:43:10 +0000 +Subject: [PATCH] overlays: uart0 - return GPIOs 14 and 15 to inputs + +In the event that alternate pins are used (only useful on Compute +Modules), return the standard pins to inputs to avoid double-mapping +them. + +See: https://www.raspberrypi.org/forums/viewtopic.php?p=1388713#p1316977 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/uart0-overlay.dts | 13 +++++++------ + 1 file changed, 7 insertions(+), 6 deletions(-) + +--- a/arch/arm/boot/dts/overlays/uart0-overlay.dts ++++ b/arch/arm/boot/dts/overlays/uart0-overlay.dts +@@ -17,16 +17,17 @@ + target = <&gpio>; + __overlay__ { + uart0_pins: uart0_pins { +- brcm,pins = <14 15>; +- brcm,function = <4>; /* alt0 */ +- brcm,pull = <0 2>; ++ brcm,pins = <14 15 14 15>; ++ brcm,function = <0 0 4 4>; /* alt0 */ ++ brcm,pull = <0 0 0 2>; + }; + }; + }; + + __overrides__ { +- txd0_pin = <&uart0_pins>,"brcm,pins:0"; +- rxd0_pin = <&uart0_pins>,"brcm,pins:4"; +- pin_func = <&uart0_pins>,"brcm,function:0"; ++ txd0_pin = <&uart0_pins>,"brcm,pins:8"; ++ rxd0_pin = <&uart0_pins>,"brcm,pins:12"; ++ pin_func = <&uart0_pins>,"brcm,function:8", ++ <&uart0_pins>,"brcm,function:12"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0167-BCM270X_DT-Add-gpio-fan-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0167-BCM270X_DT-Add-gpio-fan-overlay.patch deleted file mode 100644 index f0cd000a2e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0167-BCM270X_DT-Add-gpio-fan-overlay.patch +++ /dev/null @@ -1,114 +0,0 @@ -From 9762b3a015886c42941f535e688ffac1f56e35aa Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 18 Sep 2018 11:08:07 +0100 -Subject: [PATCH 167/806] BCM270X_DT: Add gpio-fan overlay - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 8 +++ - .../boot/dts/overlays/gpio-fan-overlay.dts | 71 +++++++++++++++++++ - 3 files changed, 80 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/gpio-fan-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -33,6 +33,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - fe-pi-audio.dtbo \ - goodix.dtbo \ - googlevoicehat-soundcard.dtbo \ -+ gpio-fan.dtbo \ - gpio-ir.dtbo \ - gpio-ir-tx.dtbo \ - gpio-key.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -541,6 +541,14 @@ Load: dtoverlay=googlevoicehat-soundca - Params: - - -+Name: gpio-fan -+Info: Configure a GPIO pin to control a cooling fan. -+Load: dtoverlay=gpio-fan,= -+Params: gpiopin GPIO used to control the fan (default 12) -+ temp Temperature at which the fan switches on, in -+ millicelcius (default 55000) -+ -+ - Name: gpio-ir - Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- - based gpio_ir_recv driver maps received keys directly to a ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts -@@ -0,0 +1,71 @@ -+/* -+ * Overlay for the Raspberry Pi GPIO Fan @ BCM GPIO12. -+ * Optional parameters: -+ * - "gpiopin" - default GPIO12 -+ * - "temp" - default 55000 -+ * Requires: -+ * - kernel configurations: CONFIG_SENSORS_GPIO_FAN=m and CONFIG_SENSORS_PWM_FAN=m; -+ * - kernel rebuid; -+ * - DC Fan connected to GPIO via a N-MOSFET (2N7002) -+ * -+ * ┌─────────────────────┐ -+ * │Fan negative terminal│ -+ * └┬────────────────────┘ -+ * │ -+ * │──┘ -+ * [GPIO12]──────┤ │<─┐ 2N7002 -+ * │──┤ -+ * │ -+ * ─┴─ -+ * GND -+ * -+ * sudo dtc -W no-unit_address_vs_reg -@ -I dts -O dtb -o /boot/overlays/gpio-fan.dtbo gpio-fan.dts -+ * sudo nano /boot/config.txt add "dtoverlay=gpio-fan" or "dtoverlay=gpio-fan,gpiopin=12,temp=45000" -+ * or -+ * sudo sh -c "echo '\n# Enable PI GPIO-Fan\ndtoverlay=gpio-fan\n' >> /boot/config.txt" -+ * sudo sh -c "echo '\n# Enable PI GPIO-Fan\ndtoverlay=gpio-fan,gpiopin=12\n' >> /boot/config.txt" -+ * -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ fan0: gpio-fan@0 { -+ compatible = "gpio-fan"; -+ gpios = <&gpio 12 1>; -+ gpio-fan,speed-map = <0 0>, -+ <5000 1>; -+ #cooling-cells = <2>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&cpu_thermal>; -+ polling-delay = <2000>; /* milliseconds */ -+ __overlay__ { -+ trips { -+ cpu_hot: trip-point@0 { -+ temperature = <55000>; /* (millicelsius) Fan started at 55°C */ -+ hysteresis = <5000>; /* (millicelsius) Fan stopped at 50°C */ -+ type = "active"; -+ }; -+ }; -+ cooling-maps { -+ map0 { -+ trip = <&cpu_hot>; -+ cooling-device = <&fan0 1 1>; -+ }; -+ }; -+ }; -+ }; -+ __overrides__ { -+ gpiopin = <&fan0>,"gpios:4", <&fan0>,"brcm,pins:0"; -+ temp = <&cpu_hot>,"temperature:0"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0167-mmc-bcm2835-sdhost-Fix-warnings-on-arm64.patch b/target/linux/brcm2708/patches-4.19/950-0167-mmc-bcm2835-sdhost-Fix-warnings-on-arm64.patch new file mode 100644 index 0000000000..12e1289734 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0167-mmc-bcm2835-sdhost-Fix-warnings-on-arm64.patch @@ -0,0 +1,252 @@ +From c961f0534bdf659108eaf3352989683411767611 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 12 Nov 2018 22:54:40 +0000 +Subject: [PATCH] mmc: bcm2835-sdhost: Fix warnings on arm64 + +Signed-off-by: Phil Elwell +--- + drivers/mmc/host/bcm2835-sdhost.c | 56 +++++++++++++++---------------- + 1 file changed, 28 insertions(+), 28 deletions(-) + +--- a/drivers/mmc/host/bcm2835-sdhost.c ++++ b/drivers/mmc/host/bcm2835-sdhost.c +@@ -247,7 +247,7 @@ static void log_init(struct device *dev, + GFP_KERNEL); + if (sdhost_log_buf) { + pr_info("sdhost: log_buf @ %p (%x)\n", +- sdhost_log_buf, sdhost_log_addr); ++ sdhost_log_buf, (u32)sdhost_log_addr); + timer_base = ioremap_nocache(bus_to_phys + 0x7e003000, SZ_4K); + if (!timer_base) + pr_err("sdhost: failed to remap timer\n"); +@@ -301,7 +301,7 @@ static void log_dump(void) + } + } + +-#define log_event(event, param1, param2) log_event_impl(event, param1, param2) ++#define log_event(event, param1, param2) log_event_impl(event, (u32)(uintptr_t)param1, (u32)(uintptr_t)param2) + + #else + +@@ -527,7 +527,7 @@ static void bcm2835_sdhost_dma_complete( + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); +- log_event("DMA<", (u32)host->data, bcm2835_sdhost_read(host, SDHSTS)); ++ log_event("DMA<", host->data, bcm2835_sdhost_read(host, SDHSTS)); + log_event("DMA ", bcm2835_sdhost_read(host, SDCMD), + bcm2835_sdhost_read(host, SDEDM)); + +@@ -559,7 +559,7 @@ static void bcm2835_sdhost_dma_complete( + + bcm2835_sdhost_finish_data(host); + +- log_event("DMA>", (u32)host->data, 0); ++ log_event("DMA>", host->data, 0); + spin_unlock_irqrestore(&host->lock, flags); + } + +@@ -748,7 +748,7 @@ static void bcm2835_sdhost_transfer_pio( + u32 sdhsts; + bool is_read; + BUG_ON(!host->data); +- log_event("XFP<", (u32)host->data, host->blocks); ++ log_event("XFP<", host->data, host->blocks); + + is_read = (host->data->flags & MMC_DATA_READ) != 0; + if (is_read) +@@ -773,7 +773,7 @@ static void bcm2835_sdhost_transfer_pio( + sdhsts); + host->data->error = -ETIMEDOUT; + } +- log_event("XFP>", (u32)host->data, host->blocks); ++ log_event("XFP>", host->data, host->blocks); + } + + static void bcm2835_sdhost_prepare_dma(struct bcm2835_host *host, +@@ -783,7 +783,7 @@ static void bcm2835_sdhost_prepare_dma(s + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *dma_chan; + +- log_event("PRD<", (u32)data, 0); ++ log_event("PRD<", data, 0); + pr_debug("bcm2835_sdhost_prepare_dma()\n"); + + dma_chan = host->dma_chan_rxtx; +@@ -794,7 +794,7 @@ static void bcm2835_sdhost_prepare_dma(s + dir_data = DMA_TO_DEVICE; + dir_slave = DMA_MEM_TO_DEV; + } +- log_event("PRD1", (u32)dma_chan, 0); ++ log_event("PRD1", dma_chan, 0); + + BUG_ON(!dma_chan->device); + BUG_ON(!dma_chan->device->dev); +@@ -841,7 +841,7 @@ static void bcm2835_sdhost_prepare_dma(s + desc = dmaengine_prep_slave_sg(dma_chan, data->sg, + len, dir_slave, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); +- log_event("PRD3", (u32)desc, 0); ++ log_event("PRD3", desc, 0); + + if (desc) { + desc->callback = bcm2835_sdhost_dma_complete; +@@ -850,12 +850,12 @@ static void bcm2835_sdhost_prepare_dma(s + host->dma_chan = dma_chan; + host->dma_dir = dir_data; + } +- log_event("PDM>", (u32)data, 0); ++ log_event("PDM>", data, 0); + } + + static void bcm2835_sdhost_start_dma(struct bcm2835_host *host) + { +- log_event("SDMA", (u32)host->data, (u32)host->dma_chan); ++ log_event("SDMA", host->data, host->dma_chan); + dmaengine_submit(host->dma_desc); + dma_async_issue_pending(host->dma_chan); + } +@@ -1079,7 +1079,7 @@ static void bcm2835_sdhost_finish_data(s + data = host->data; + BUG_ON(!data); + +- log_event("FDA<", (u32)host->mrq, (u32)host->cmd); ++ log_event("FDA<", host->mrq, host->cmd); + pr_debug("finish_data(error %d, stop %d, sbc %d)\n", + data->error, data->stop ? 1 : 0, + host->mrq->sbc ? 1 : 0); +@@ -1102,7 +1102,7 @@ static void bcm2835_sdhost_finish_data(s + } + else + bcm2835_sdhost_transfer_complete(host); +- log_event("FDA>", (u32)host->mrq, (u32)host->cmd); ++ log_event("FDA>", host->mrq, host->cmd); + } + + static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host) +@@ -1116,7 +1116,7 @@ static void bcm2835_sdhost_transfer_comp + data = host->data; + host->data = NULL; + +- log_event("TCM<", (u32)data, data->error); ++ log_event("TCM<", data, data->error); + pr_debug("transfer_complete(error %d, stop %d)\n", + data->error, data->stop ? 1 : 0); + +@@ -1138,7 +1138,7 @@ static void bcm2835_sdhost_transfer_comp + bcm2835_sdhost_wait_transfer_complete(host); + tasklet_schedule(&host->finish_tasklet); + } +- log_event("TCM>", (u32)data, 0); ++ log_event("TCM>", data, 0); + } + + /* If irq_flags is valid, the caller is in a thread context and is allowed +@@ -1153,7 +1153,7 @@ static void bcm2835_sdhost_finish_comman + int timediff = 0; + #endif + +- log_event("FCM<", (u32)host->mrq, (u32)host->cmd); ++ log_event("FCM<", host->mrq, host->cmd); + pr_debug("finish_command(%x)\n", bcm2835_sdhost_read(host, SDCMD)); + + BUG_ON(!host->cmd || !host->mrq); +@@ -1310,7 +1310,7 @@ static void bcm2835_sdhost_finish_comman + else if (host->data_complete) + bcm2835_sdhost_transfer_complete(host); + } +- log_event("FCM>", (u32)host->mrq, (u32)host->cmd); ++ log_event("FCM>", host->mrq, host->cmd); + } + + static void bcm2835_sdhost_timeout(struct timer_list *t) +@@ -1347,7 +1347,7 @@ static void bcm2835_sdhost_timeout(struc + + static void bcm2835_sdhost_busy_irq(struct bcm2835_host *host, u32 intmask) + { +- log_event("IRQB", (u32)host->cmd, intmask); ++ log_event("IRQB", host->cmd, intmask); + if (!host->cmd) { + pr_err("%s: got command busy interrupt 0x%08x even " + "though no command operation was in progress.\n", +@@ -1400,7 +1400,7 @@ static void bcm2835_sdhost_data_irq(stru + data/space available FIFO status bits. It is therefore not + an error to get here when there is no data transfer in + progress. */ +- log_event("IRQD", (u32)host->data, intmask); ++ log_event("IRQD", host->data, intmask); + if (!host->data) + return; + +@@ -1437,7 +1437,7 @@ static void bcm2835_sdhost_data_irq(stru + + static void bcm2835_sdhost_block_irq(struct bcm2835_host *host, u32 intmask) + { +- log_event("IRQK", (u32)host->data, intmask); ++ log_event("IRQK", host->data, intmask); + if (!host->data) { + pr_err("%s: got block interrupt 0x%08x even " + "though no data operation was in progress.\n", +@@ -1695,10 +1695,10 @@ static void bcm2835_sdhost_request(struc + edm = bcm2835_sdhost_read(host, SDEDM); + fsm = edm & SDEDM_FSM_MASK; + +- log_event("REQ<", (u32)mrq, edm); ++ log_event("REQ<", mrq, edm); + if ((fsm != SDEDM_FSM_IDENTMODE) && + (fsm != SDEDM_FSM_DATAMODE)) { +- log_event("REQ!", (u32)mrq, edm); ++ log_event("REQ!", mrq, edm); + if (host->debug) { + pr_warn("%s: previous command (%d) not complete (EDM %x)\n", + mmc_hostname(host->mmc), +@@ -1730,11 +1730,11 @@ static void bcm2835_sdhost_request(struc + bcm2835_sdhost_finish_command(host, &flags); + } + +- log_event("CMD ", (u32)mrq->cmd->opcode, ++ log_event("CMD ", mrq->cmd->opcode, + mrq->data ? (u32)mrq->data->blksz : 0); + mmiowb(); + +- log_event("REQ>", (u32)mrq, 0); ++ log_event("REQ>", mrq, 0); + spin_unlock_irqrestore(&host->lock, flags); + } + +@@ -1790,7 +1790,7 @@ static void bcm2835_sdhost_cmd_wait_work + + spin_lock_irqsave(&host->lock, flags); + +- log_event("CWK<", (u32)host->cmd, (u32)host->mrq); ++ log_event("CWK<", host->cmd, host->mrq); + + /* + * If this tasklet gets rescheduled while running, it will +@@ -1805,7 +1805,7 @@ static void bcm2835_sdhost_cmd_wait_work + + mmiowb(); + +- log_event("CWK>", (u32)host->cmd, 0); ++ log_event("CWK>", host->cmd, 0); + + spin_unlock_irqrestore(&host->lock, flags); + } +@@ -1821,7 +1821,7 @@ static void bcm2835_sdhost_tasklet_finis + + spin_lock_irqsave(&host->lock, flags); + +- log_event("TSK<", (u32)host->mrq, 0); ++ log_event("TSK<", host->mrq, 0); + /* + * If this tasklet gets rescheduled while running, it will + * be run again afterwards but without any active request. +@@ -1889,7 +1889,7 @@ static void bcm2835_sdhost_tasklet_finis + } + + mmc_request_done(host->mmc, mrq); +- log_event("TSK>", (u32)mrq, 0); ++ log_event("TSK>", mrq, 0); + } + + int bcm2835_sdhost_add_host(struct bcm2835_host *host) diff --git a/target/linux/brcm2708/patches-4.19/950-0168-Fix-warning-in-bcm2835-smi-nand.patch b/target/linux/brcm2708/patches-4.19/950-0168-Fix-warning-in-bcm2835-smi-nand.patch new file mode 100644 index 0000000000..ca363a1344 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0168-Fix-warning-in-bcm2835-smi-nand.patch @@ -0,0 +1,23 @@ +From 2f4524681c940887bc1e7d98b960719c731c85df Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 12 Nov 2018 22:56:35 +0000 +Subject: [PATCH] Fix warning in bcm2835-smi-nand + +Signed-off-by: Phil Elwell +--- + drivers/mtd/nand/raw/bcm2835_smi_nand.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/mtd/nand/raw/bcm2835_smi_nand.c ++++ b/drivers/mtd/nand/raw/bcm2835_smi_nand.c +@@ -135,10 +135,8 @@ static int bcm2835_smi_nand_probe(struct + struct mtd_info *mtd; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node, *smi_node; +- struct mtd_part_parser_data ppdata; + struct smi_settings *smi_settings; + struct bcm2835_smi_instance *smi_inst; +- int ret = -ENXIO; + + if (!node) { + dev_err(dev, "No device tree node supplied!"); diff --git a/target/linux/brcm2708/patches-4.19/950-0168-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch b/target/linux/brcm2708/patches-4.19/950-0168-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch deleted file mode 100644 index 693afc1818..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0168-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch +++ /dev/null @@ -1,484 +0,0 @@ -From 08e33d99152acc5e35fd94f9b443f38baaac93e1 Mon Sep 17 00:00:00 2001 -From: Hanno Zulla -Date: Thu, 23 Aug 2018 17:03:38 +0200 -Subject: [PATCH 168/806] HID: hid-bigbenff: driver for BigBen Interactive - PS3OFMINIPAD gamepad - -commit 256a90ed9e46b270bbc4e15ef05216ff049c3721 upstream. - -This is a driver to fix input mapping and add LED & force feedback -support for the "BigBen Interactive Kid-friendly Wired Controller -PS3OFMINIPAD SONY" gamepad with USB id 146b:0902. It was originally -sold as a PS3 accessory and makes a very nice gamepad for Retropie. - -Signed-off-by: Hanno Zulla -Signed-off-by: Jiri Kosina ---- - drivers/hid/Kconfig | 13 ++ - drivers/hid/Makefile | 1 + - drivers/hid/hid-bigbenff.c | 414 +++++++++++++++++++++++++++++++++++++ - drivers/hid/hid-ids.h | 3 + - 4 files changed, 431 insertions(+) - create mode 100644 drivers/hid/hid-bigbenff.c - ---- a/drivers/hid/Kconfig -+++ b/drivers/hid/Kconfig -@@ -182,6 +182,19 @@ config HID_BETOP_FF - Currently the following devices are known to be supported: - - BETOP 2185 PC & BFM MODE - -+config HID_BIGBEN_FF -+ tristate "BigBen Interactive Kids' gamepad support" -+ depends on USB_HID -+ depends on NEW_LEDS -+ depends on LEDS_CLASS -+ select INPUT_FF_MEMLESS -+ default !EXPERT -+ help -+ Support for the "Kid-friendly Wired Controller" PS3OFMINIPAD -+ gamepad made by BigBen Interactive, originally sold as a PS3 -+ accessory. This driver fixes input mapping and adds support for -+ force feedback effects and LEDs on the device. -+ - config HID_CHERRY - tristate "Cherry Cymotion keyboard" - depends on HID ---- a/drivers/hid/Makefile -+++ b/drivers/hid/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_HID_ASUS) += hid-asus.o - obj-$(CONFIG_HID_AUREAL) += hid-aureal.o - obj-$(CONFIG_HID_BELKIN) += hid-belkin.o - obj-$(CONFIG_HID_BETOP_FF) += hid-betopff.o -+obj-$(CONFIG_HID_BIGBEN_FF) += hid-bigbenff.o - obj-$(CONFIG_HID_CHERRY) += hid-cherry.o - obj-$(CONFIG_HID_CHICONY) += hid-chicony.o - obj-$(CONFIG_HID_CMEDIA) += hid-cmedia.o ---- /dev/null -+++ b/drivers/hid/hid-bigbenff.c -@@ -0,0 +1,414 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+ -+/* -+ * LED & force feedback support for BigBen Interactive -+ * -+ * 0x146b:0x0902 "Bigben Interactive Bigben Game Pad" -+ * "Kid-friendly Wired Controller" PS3OFMINIPAD SONY -+ * sold for use with the PS3 -+ * -+ * Copyright (c) 2018 Hanno Zulla -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "hid-ids.h" -+ -+ -+/* -+ * The original descriptor for 0x146b:0x0902 -+ * -+ * 0x05, 0x01, // Usage Page (Generic Desktop Ctrls) -+ * 0x09, 0x05, // Usage (Game Pad) -+ * 0xA1, 0x01, // Collection (Application) -+ * 0x15, 0x00, // Logical Minimum (0) -+ * 0x25, 0x01, // Logical Maximum (1) -+ * 0x35, 0x00, // Physical Minimum (0) -+ * 0x45, 0x01, // Physical Maximum (1) -+ * 0x75, 0x01, // Report Size (1) -+ * 0x95, 0x0D, // Report Count (13) -+ * 0x05, 0x09, // Usage Page (Button) -+ * 0x19, 0x01, // Usage Minimum (0x01) -+ * 0x29, 0x0D, // Usage Maximum (0x0D) -+ * 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) -+ * 0x95, 0x03, // Report Count (3) -+ * 0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) -+ * 0x05, 0x01, // Usage Page (Generic Desktop Ctrls) -+ * 0x25, 0x07, // Logical Maximum (7) -+ * 0x46, 0x3B, 0x01, // Physical Maximum (315) -+ * 0x75, 0x04, // Report Size (4) -+ * 0x95, 0x01, // Report Count (1) -+ * 0x65, 0x14, // Unit (System: English Rotation, Length: Centimeter) -+ * 0x09, 0x39, // Usage (Hat switch) -+ * 0x81, 0x42, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,Null State) -+ * 0x65, 0x00, // Unit (None) -+ * 0x95, 0x01, // Report Count (1) -+ * 0x81, 0x01, // Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) -+ * 0x26, 0xFF, 0x00, // Logical Maximum (255) -+ * 0x46, 0xFF, 0x00, // Physical Maximum (255) -+ * 0x09, 0x30, // Usage (X) -+ * 0x09, 0x31, // Usage (Y) -+ * 0x09, 0x32, // Usage (Z) -+ * 0x09, 0x35, // Usage (Rz) -+ * 0x75, 0x08, // Report Size (8) -+ * 0x95, 0x04, // Report Count (4) -+ * 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) -+ * 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) -+ * 0x09, 0x20, // Usage (0x20) -+ * 0x09, 0x21, // Usage (0x21) -+ * 0x09, 0x22, // Usage (0x22) -+ * 0x09, 0x23, // Usage (0x23) -+ * 0x09, 0x24, // Usage (0x24) -+ * 0x09, 0x25, // Usage (0x25) -+ * 0x09, 0x26, // Usage (0x26) -+ * 0x09, 0x27, // Usage (0x27) -+ * 0x09, 0x28, // Usage (0x28) -+ * 0x09, 0x29, // Usage (0x29) -+ * 0x09, 0x2A, // Usage (0x2A) -+ * 0x09, 0x2B, // Usage (0x2B) -+ * 0x95, 0x0C, // Report Count (12) -+ * 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) -+ * 0x0A, 0x21, 0x26, // Usage (0x2621) -+ * 0x95, 0x08, // Report Count (8) -+ * 0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) -+ * 0x0A, 0x21, 0x26, // Usage (0x2621) -+ * 0x91, 0x02, // Output (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) -+ * 0x26, 0xFF, 0x03, // Logical Maximum (1023) -+ * 0x46, 0xFF, 0x03, // Physical Maximum (1023) -+ * 0x09, 0x2C, // Usage (0x2C) -+ * 0x09, 0x2D, // Usage (0x2D) -+ * 0x09, 0x2E, // Usage (0x2E) -+ * 0x09, 0x2F, // Usage (0x2F) -+ * 0x75, 0x10, // Report Size (16) -+ * 0x95, 0x04, // Report Count (4) -+ * 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) -+ * 0xC0, // End Collection -+ */ -+ -+#define PID0902_RDESC_ORIG_SIZE 137 -+ -+/* -+ * The fixed descriptor for 0x146b:0x0902 -+ * -+ * - map buttons according to gamepad.rst -+ * - assign right stick from Z/Rz to Rx/Ry -+ * - map previously unused analog trigger data to Z/RZ -+ * - simplify feature and output descriptor -+ */ -+static __u8 pid0902_rdesc_fixed[] = { -+ 0x05, 0x01, /* Usage Page (Generic Desktop Ctrls) */ -+ 0x09, 0x05, /* Usage (Game Pad) */ -+ 0xA1, 0x01, /* Collection (Application) */ -+ 0x15, 0x00, /* Logical Minimum (0) */ -+ 0x25, 0x01, /* Logical Maximum (1) */ -+ 0x35, 0x00, /* Physical Minimum (0) */ -+ 0x45, 0x01, /* Physical Maximum (1) */ -+ 0x75, 0x01, /* Report Size (1) */ -+ 0x95, 0x0D, /* Report Count (13) */ -+ 0x05, 0x09, /* Usage Page (Button) */ -+ 0x09, 0x05, /* Usage (BTN_WEST) */ -+ 0x09, 0x01, /* Usage (BTN_SOUTH) */ -+ 0x09, 0x02, /* Usage (BTN_EAST) */ -+ 0x09, 0x04, /* Usage (BTN_NORTH) */ -+ 0x09, 0x07, /* Usage (BTN_TL) */ -+ 0x09, 0x08, /* Usage (BTN_TR) */ -+ 0x09, 0x09, /* Usage (BTN_TL2) */ -+ 0x09, 0x0A, /* Usage (BTN_TR2) */ -+ 0x09, 0x0B, /* Usage (BTN_SELECT) */ -+ 0x09, 0x0C, /* Usage (BTN_START) */ -+ 0x09, 0x0E, /* Usage (BTN_THUMBL) */ -+ 0x09, 0x0F, /* Usage (BTN_THUMBR) */ -+ 0x09, 0x0D, /* Usage (BTN_MODE) */ -+ 0x81, 0x02, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) */ -+ 0x75, 0x01, /* Report Size (1) */ -+ 0x95, 0x03, /* Report Count (3) */ -+ 0x81, 0x01, /* Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) */ -+ 0x05, 0x01, /* Usage Page (Generic Desktop Ctrls) */ -+ 0x25, 0x07, /* Logical Maximum (7) */ -+ 0x46, 0x3B, 0x01, /* Physical Maximum (315) */ -+ 0x75, 0x04, /* Report Size (4) */ -+ 0x95, 0x01, /* Report Count (1) */ -+ 0x65, 0x14, /* Unit (System: English Rotation, Length: Centimeter) */ -+ 0x09, 0x39, /* Usage (Hat switch) */ -+ 0x81, 0x42, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,Null State) */ -+ 0x65, 0x00, /* Unit (None) */ -+ 0x95, 0x01, /* Report Count (1) */ -+ 0x81, 0x01, /* Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) */ -+ 0x26, 0xFF, 0x00, /* Logical Maximum (255) */ -+ 0x46, 0xFF, 0x00, /* Physical Maximum (255) */ -+ 0x09, 0x30, /* Usage (X) */ -+ 0x09, 0x31, /* Usage (Y) */ -+ 0x09, 0x33, /* Usage (Rx) */ -+ 0x09, 0x34, /* Usage (Ry) */ -+ 0x75, 0x08, /* Report Size (8) */ -+ 0x95, 0x04, /* Report Count (4) */ -+ 0x81, 0x02, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) */ -+ 0x95, 0x0A, /* Report Count (10) */ -+ 0x81, 0x01, /* Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) */ -+ 0x05, 0x01, /* Usage Page (Generic Desktop Ctrls) */ -+ 0x26, 0xFF, 0x00, /* Logical Maximum (255) */ -+ 0x46, 0xFF, 0x00, /* Physical Maximum (255) */ -+ 0x09, 0x32, /* Usage (Z) */ -+ 0x09, 0x35, /* Usage (Rz) */ -+ 0x95, 0x02, /* Report Count (2) */ -+ 0x81, 0x02, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) */ -+ 0x95, 0x08, /* Report Count (8) */ -+ 0x81, 0x01, /* Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) */ -+ 0x06, 0x00, 0xFF, /* Usage Page (Vendor Defined 0xFF00) */ -+ 0xB1, 0x02, /* Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) */ -+ 0x0A, 0x21, 0x26, /* Usage (0x2621) */ -+ 0x95, 0x08, /* Report Count (8) */ -+ 0x91, 0x02, /* Output (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) */ -+ 0x0A, 0x21, 0x26, /* Usage (0x2621) */ -+ 0x95, 0x08, /* Report Count (8) */ -+ 0x81, 0x02, /* Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) */ -+ 0xC0, /* End Collection */ -+}; -+ -+#define NUM_LEDS 4 -+ -+struct bigben_device { -+ struct hid_device *hid; -+ struct hid_report *report; -+ u8 led_state; /* LED1 = 1 .. LED4 = 8 */ -+ u8 right_motor_on; /* right motor off/on 0/1 */ -+ u8 left_motor_force; /* left motor force 0-255 */ -+ struct led_classdev *leds[NUM_LEDS]; -+ bool work_led; -+ bool work_ff; -+ struct work_struct worker; -+}; -+ -+ -+static void bigben_worker(struct work_struct *work) -+{ -+ struct bigben_device *bigben = container_of(work, -+ struct bigben_device, worker); -+ struct hid_field *report_field = bigben->report->field[0]; -+ -+ if (bigben->work_led) { -+ bigben->work_led = false; -+ report_field->value[0] = 0x01; /* 1 = led message */ -+ report_field->value[1] = 0x08; /* reserved value, always 8 */ -+ report_field->value[2] = bigben->led_state; -+ report_field->value[3] = 0x00; /* padding */ -+ report_field->value[4] = 0x00; /* padding */ -+ report_field->value[5] = 0x00; /* padding */ -+ report_field->value[6] = 0x00; /* padding */ -+ report_field->value[7] = 0x00; /* padding */ -+ hid_hw_request(bigben->hid, bigben->report, HID_REQ_SET_REPORT); -+ } -+ -+ if (bigben->work_ff) { -+ bigben->work_ff = false; -+ report_field->value[0] = 0x02; /* 2 = rumble effect message */ -+ report_field->value[1] = 0x08; /* reserved value, always 8 */ -+ report_field->value[2] = bigben->right_motor_on; -+ report_field->value[3] = bigben->left_motor_force; -+ report_field->value[4] = 0xff; /* duration 0-254 (255 = nonstop) */ -+ report_field->value[5] = 0x00; /* padding */ -+ report_field->value[6] = 0x00; /* padding */ -+ report_field->value[7] = 0x00; /* padding */ -+ hid_hw_request(bigben->hid, bigben->report, HID_REQ_SET_REPORT); -+ } -+} -+ -+static int hid_bigben_play_effect(struct input_dev *dev, void *data, -+ struct ff_effect *effect) -+{ -+ struct bigben_device *bigben = data; -+ u8 right_motor_on; -+ u8 left_motor_force; -+ -+ if (effect->type != FF_RUMBLE) -+ return 0; -+ -+ right_motor_on = effect->u.rumble.weak_magnitude ? 1 : 0; -+ left_motor_force = effect->u.rumble.strong_magnitude / 256; -+ -+ if (right_motor_on != bigben->right_motor_on || -+ left_motor_force != bigben->left_motor_force) { -+ bigben->right_motor_on = right_motor_on; -+ bigben->left_motor_force = left_motor_force; -+ bigben->work_ff = true; -+ schedule_work(&bigben->worker); -+ } -+ -+ return 0; -+} -+ -+static void bigben_set_led(struct led_classdev *led, -+ enum led_brightness value) -+{ -+ struct device *dev = led->dev->parent; -+ struct hid_device *hid = to_hid_device(dev); -+ struct bigben_device *bigben = hid_get_drvdata(hid); -+ int n; -+ bool work; -+ -+ if (!bigben) { -+ hid_err(hid, "no device data\n"); -+ return; -+ } -+ -+ for (n = 0; n < NUM_LEDS; n++) { -+ if (led == bigben->leds[n]) { -+ if (value == LED_OFF) { -+ work = (bigben->led_state & BIT(n)); -+ bigben->led_state &= ~BIT(n); -+ } else { -+ work = !(bigben->led_state & BIT(n)); -+ bigben->led_state |= BIT(n); -+ } -+ -+ if (work) { -+ bigben->work_led = true; -+ schedule_work(&bigben->worker); -+ } -+ return; -+ } -+ } -+} -+ -+static enum led_brightness bigben_get_led(struct led_classdev *led) -+{ -+ struct device *dev = led->dev->parent; -+ struct hid_device *hid = to_hid_device(dev); -+ struct bigben_device *bigben = hid_get_drvdata(hid); -+ int n; -+ -+ if (!bigben) { -+ hid_err(hid, "no device data\n"); -+ return LED_OFF; -+ } -+ -+ for (n = 0; n < NUM_LEDS; n++) { -+ if (led == bigben->leds[n]) -+ return (bigben->led_state & BIT(n)) ? LED_ON : LED_OFF; -+ } -+ -+ return LED_OFF; -+} -+ -+static void bigben_remove(struct hid_device *hid) -+{ -+ struct bigben_device *bigben = hid_get_drvdata(hid); -+ -+ cancel_work_sync(&bigben->worker); -+ hid_hw_close(hid); -+ hid_hw_stop(hid); -+} -+ -+static int bigben_probe(struct hid_device *hid, -+ const struct hid_device_id *id) -+{ -+ struct bigben_device *bigben; -+ struct hid_input *hidinput; -+ struct list_head *report_list; -+ struct led_classdev *led; -+ char *name; -+ size_t name_sz; -+ int n, error; -+ -+ bigben = devm_kzalloc(&hid->dev, sizeof(*bigben), GFP_KERNEL); -+ if (!bigben) -+ return -ENOMEM; -+ hid_set_drvdata(hid, bigben); -+ bigben->hid = hid; -+ -+ error = hid_parse(hid); -+ if (error) { -+ hid_err(hid, "parse failed\n"); -+ return error; -+ } -+ -+ error = hid_hw_start(hid, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF); -+ if (error) { -+ hid_err(hid, "hw start failed\n"); -+ return error; -+ } -+ -+ report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; -+ bigben->report = list_entry(report_list->next, -+ struct hid_report, list); -+ -+ hidinput = list_first_entry(&hid->inputs, struct hid_input, list); -+ set_bit(FF_RUMBLE, hidinput->input->ffbit); -+ -+ INIT_WORK(&bigben->worker, bigben_worker); -+ -+ error = input_ff_create_memless(hidinput->input, bigben, -+ hid_bigben_play_effect); -+ if (error) -+ return error; -+ -+ name_sz = strlen(dev_name(&hid->dev)) + strlen(":red:bigben#") + 1; -+ -+ for (n = 0; n < NUM_LEDS; n++) { -+ led = devm_kzalloc( -+ &hid->dev, -+ sizeof(struct led_classdev) + name_sz, -+ GFP_KERNEL -+ ); -+ if (!led) -+ return -ENOMEM; -+ name = (void *)(&led[1]); -+ snprintf(name, name_sz, -+ "%s:red:bigben%d", -+ dev_name(&hid->dev), n + 1 -+ ); -+ led->name = name; -+ led->brightness = (n == 0) ? LED_ON : LED_OFF; -+ led->max_brightness = 1; -+ led->brightness_get = bigben_get_led; -+ led->brightness_set = bigben_set_led; -+ bigben->leds[n] = led; -+ error = devm_led_classdev_register(&hid->dev, led); -+ if (error) -+ return error; -+ } -+ -+ /* initial state: LED1 is on, no rumble effect */ -+ bigben->led_state = BIT(0); -+ bigben->right_motor_on = 0; -+ bigben->left_motor_force = 0; -+ bigben->work_led = true; -+ bigben->work_ff = true; -+ schedule_work(&bigben->worker); -+ -+ hid_info(hid, "LED and force feedback support for BigBen gamepad\n"); -+ -+ return 0; -+} -+ -+static __u8 *bigben_report_fixup(struct hid_device *hid, __u8 *rdesc, -+ unsigned int *rsize) -+{ -+ if (*rsize == PID0902_RDESC_ORIG_SIZE) { -+ rdesc = pid0902_rdesc_fixed; -+ *rsize = sizeof(pid0902_rdesc_fixed); -+ } else -+ hid_warn(hid, "unexpected rdesc, please submit for review\n"); -+ return rdesc; -+} -+ -+static const struct hid_device_id bigben_devices[] = { -+ { HID_USB_DEVICE(USB_VENDOR_ID_BIGBEN, USB_DEVICE_ID_BIGBEN_PS3OFMINIPAD) }, -+ { } -+}; -+MODULE_DEVICE_TABLE(hid, bigben_devices); -+ -+static struct hid_driver bigben_driver = { -+ .name = "bigben", -+ .id_table = bigben_devices, -+ .probe = bigben_probe, -+ .report_fixup = bigben_report_fixup, -+ .remove = bigben_remove, -+}; -+module_hid_driver(bigben_driver); -+ -+MODULE_LICENSE("GPL"); ---- a/drivers/hid/hid-ids.h -+++ b/drivers/hid/hid-ids.h -@@ -233,6 +233,9 @@ - #define USB_VENDOR_ID_BETOP_2185V2PC 0x8380 - #define USB_VENDOR_ID_BETOP_2185V2BFM 0x20bc - -+#define USB_VENDOR_ID_BIGBEN 0x146b -+#define USB_DEVICE_ID_BIGBEN_PS3OFMINIPAD 0x0902 -+ - #define USB_VENDOR_ID_BTC 0x046e - #define USB_DEVICE_ID_BTC_EMPREX_REMOTE 0x5578 - #define USB_DEVICE_ID_BTC_EMPREX_REMOTE_2 0x5577 diff --git a/target/linux/brcm2708/patches-4.19/950-0169-media-ov5647-Add-set_fmt-and-get_fmt-calls.patch b/target/linux/brcm2708/patches-4.19/950-0169-media-ov5647-Add-set_fmt-and-get_fmt-calls.patch new file mode 100644 index 0000000000..00e852d7f1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0169-media-ov5647-Add-set_fmt-and-get_fmt-calls.patch @@ -0,0 +1,47 @@ +From 5796bf25ff928fef204c7f53572f0fc5b8f79d45 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:55:37 +0000 +Subject: [PATCH] media: ov5647: Add set_fmt and get_fmt calls. + +There's no way to query the subdevice for the supported +resolutions. +Add set_fmt and get_fmt implementations. + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/ov5647.c | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +--- a/drivers/media/i2c/ov5647.c ++++ b/drivers/media/i2c/ov5647.c +@@ -463,8 +463,30 @@ static int ov5647_enum_mbus_code(struct + return 0; + } + ++static int ov5647_set_get_fmt(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_format *format) ++{ ++ struct v4l2_mbus_framefmt *fmt = &format->format; ++ ++ if (format->pad != 0) ++ return -EINVAL; ++ ++ /* Only one format is supported, so return that */ ++ memset(fmt, 0, sizeof(*fmt)); ++ fmt->code = MEDIA_BUS_FMT_SBGGR8_1X8; ++ fmt->colorspace = V4L2_COLORSPACE_SRGB; ++ fmt->field = V4L2_FIELD_NONE; ++ fmt->width = 640; ++ fmt->height = 480; ++ ++ return 0; ++} ++ + static const struct v4l2_subdev_pad_ops ov5647_subdev_pad_ops = { + .enum_mbus_code = ov5647_enum_mbus_code, ++ .set_fmt = ov5647_set_get_fmt, ++ .get_fmt = ov5647_set_get_fmt, + }; + + static const struct v4l2_subdev_ops ov5647_subdev_ops = { diff --git a/target/linux/brcm2708/patches-4.19/950-0170-ASoC-cs4265-Add-a-MIC-pre.-route-2696.patch b/target/linux/brcm2708/patches-4.19/950-0170-ASoC-cs4265-Add-a-MIC-pre.-route-2696.patch deleted file mode 100644 index 9f67d8a1ff..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0170-ASoC-cs4265-Add-a-MIC-pre.-route-2696.patch +++ /dev/null @@ -1,34 +0,0 @@ -From f78b69873eb4839dd836b4a681ccce90aa8188f1 Mon Sep 17 00:00:00 2001 -From: Matt Flax -Date: Fri, 28 Sep 2018 15:13:28 +1000 -Subject: [PATCH 170/806] ASoC: cs4265: Add a MIC pre. route (#2696) - -Commit b0ef5011b981ece1fde8063243a56d3038b87adb upstream. - -The cs4265 driver is missing a microphone preamp enable. -This patch enables/disables the microphone preamp when mic -selection is made using the kcontrol. - -Signed-off-by: Matt Flax -Reviewed-by: Charles Keepax -Signed-off-by: Mark Brown ---- - sound/soc/codecs/cs4265.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/sound/soc/codecs/cs4265.c -+++ b/sound/soc/codecs/cs4265.c -@@ -222,10 +222,11 @@ static const struct snd_soc_dapm_route c - {"LINEOUTR", NULL, "DAC"}, - {"SPDIFOUT", NULL, "SPDIF"}, - -+ {"Pre-amp MIC", NULL, "MICL"}, -+ {"Pre-amp MIC", NULL, "MICR"}, -+ {"ADC Mux", "MIC", "Pre-amp MIC"}, - {"ADC Mux", "LINEIN", "LINEINL"}, - {"ADC Mux", "LINEIN", "LINEINR"}, -- {"ADC Mux", "MIC", "MICL"}, -- {"ADC Mux", "MIC", "MICR"}, - {"ADC", NULL, "ADC Mux"}, - {"DOUT", NULL, "ADC"}, - {"DAI1 Capture", NULL, "DOUT"}, diff --git a/target/linux/brcm2708/patches-4.19/950-0170-media-Documentation-DT-add-device-tree-for-PWDN-cont.patch b/target/linux/brcm2708/patches-4.19/950-0170-media-Documentation-DT-add-device-tree-for-PWDN-cont.patch new file mode 100644 index 0000000000..42dc7e1bc7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0170-media-Documentation-DT-add-device-tree-for-PWDN-cont.patch @@ -0,0 +1,33 @@ +From 1c643cbdcfaa7e8b4a52bb8555cce60b48d822a2 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:55:59 +0000 +Subject: [PATCH] Documentation: DT: add device tree for PWDN + control + +Add optional GPIO pwdn to connect to the PWDN line on the sensor. + +Signed-off-by: Dave Stevenson +--- + Documentation/devicetree/bindings/media/i2c/ov5647.txt | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/Documentation/devicetree/bindings/media/i2c/ov5647.txt ++++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt +@@ -10,6 +10,9 @@ Required properties: + - reg : I2C slave address of the sensor. + - clocks : Reference to the xclk clock. + ++Optional Properties: ++- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any. ++ + The common video interfaces bindings (see video-interfaces.txt) should be + used to specify link to the image data receiver. The OV5647 device + node should contain one 'port' child node with an 'endpoint' subnode. +@@ -26,6 +29,7 @@ Example: + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&camera_clk>; ++ pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + port { + camera_1: endpoint { + remote-endpoint = <&csi1_ep1>; diff --git a/target/linux/brcm2708/patches-4.19/950-0171-Update-gpio-fan-overlay.dts-2711.patch b/target/linux/brcm2708/patches-4.19/950-0171-Update-gpio-fan-overlay.dts-2711.patch deleted file mode 100644 index b95b2b92d0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0171-Update-gpio-fan-overlay.dts-2711.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 4a2be174938ac115beac4f07fa8b7ee33406cde8 Mon Sep 17 00:00:00 2001 -From: Paul -Date: Thu, 11 Oct 2018 12:17:20 +0300 -Subject: [PATCH 171/806] Update gpio-fan-overlay.dts (#2711) - -Add references, links, clear details, some typo correction. ---- - .../boot/dts/overlays/gpio-fan-overlay.dts | 36 +++++++++++-------- - 1 file changed, 22 insertions(+), 14 deletions(-) - ---- a/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts -+++ b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts -@@ -1,29 +1,37 @@ - /* - * Overlay for the Raspberry Pi GPIO Fan @ BCM GPIO12. -+ * References: -+ * - https://www.raspberrypi.org/forums/viewtopic.php?f=107&p=1367135#p1365084 -+ * - * Optional parameters: -- * - "gpiopin" - default GPIO12 -- * - "temp" - default 55000 -+ * - "gpiopin" - BCM number of the pin driving the fan, default 12 (GPIO12); -+ * - "temp" - CPU temperature at which fan is started in millicelsius, default 55000; -+ * - * Requires: -- * - kernel configurations: CONFIG_SENSORS_GPIO_FAN=m and CONFIG_SENSORS_PWM_FAN=m; -- * - kernel rebuid; -- * - DC Fan connected to GPIO via a N-MOSFET (2N7002) -+ * - kernel configurations: CONFIG_SENSORS_GPIO_FAN=m; -+ * - kernel rebuild; -+ * - N-MOSFET connected to gpiopin, 2N7002-[https://en.wikipedia.org/wiki/2N7000]; -+ * - DC Fan connected to N-MOSFET Drain terminal, a 12V fan is working fine and quite silently; -+ * [https://www.tme.eu/en/details/ee40101s1-999-a/dc12v-fans/sunon/ee40101s1-1000u-999/] - * - * ┌─────────────────────┐ - * │Fan negative terminal│ - * └┬────────────────────┘ -- * │ -- * │──┘ -+ * │D -+ * G │──┘ - * [GPIO12]──────┤ │<─┐ 2N7002 - * │──┤ -- * │ -+ * │S - * ─┴─ - * GND - * -- * sudo dtc -W no-unit_address_vs_reg -@ -I dts -O dtb -o /boot/overlays/gpio-fan.dtbo gpio-fan.dts -- * sudo nano /boot/config.txt add "dtoverlay=gpio-fan" or "dtoverlay=gpio-fan,gpiopin=12,temp=45000" -- * or -- * sudo sh -c "echo '\n# Enable PI GPIO-Fan\ndtoverlay=gpio-fan\n' >> /boot/config.txt" -- * sudo sh -c "echo '\n# Enable PI GPIO-Fan\ndtoverlay=gpio-fan,gpiopin=12\n' >> /boot/config.txt" -+ * Build: -+ * - `sudo dtc -W no-unit_address_vs_reg -@ -I dts -O dtb -o /boot/overlays/gpio-fan.dtbo gpio-fan-overlay.dts` -+ * Activate: -+ * - sudo nano /boot/config.txt add "dtoverlay=gpio-fan" or "dtoverlay=gpio-fan,gpiopin=12,temp=45000" -+ * or -+ * - sudo sh -c 'printf "\n# Enable PI GPIO-Fan Default\ndtoverlay=gpio-fan\n" >> /boot/config.txt' -+ * - sudo sh -c 'printf "\n# Enable PI GPIO-Fan Custom\ntoverlay=gpio-fan,gpiopin=12,temp=45000\n" >> /boot/config.txt' - * - */ - /dts-v1/; -@@ -52,7 +60,7 @@ - trips { - cpu_hot: trip-point@0 { - temperature = <55000>; /* (millicelsius) Fan started at 55°C */ -- hysteresis = <5000>; /* (millicelsius) Fan stopped at 50°C */ -+ hysteresis = <10000>; /* (millicelsius) Fan stopped at 45°C */ - type = "active"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0171-media-ov5647-Add-support-for-PWDN-GPIO.patch b/target/linux/brcm2708/patches-4.19/950-0171-media-ov5647-Add-support-for-PWDN-GPIO.patch new file mode 100644 index 0000000000..80a5d900d6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0171-media-ov5647-Add-support-for-PWDN-GPIO.patch @@ -0,0 +1,92 @@ +From f41fdda9ca98e675d7467cc352c678bbcdca2df1 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:56:33 +0000 +Subject: [PATCH] media: ov5647: Add support for PWDN GPIO. + +Add support for an optional GPIO connected to PWDN on the sensor. + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/ov5647.c | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +--- a/drivers/media/i2c/ov5647.c ++++ b/drivers/media/i2c/ov5647.c +@@ -21,6 +21,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -35,6 +36,13 @@ + + #define SENSOR_NAME "ov5647" + ++/* ++ * From the datasheet, "20ms after PWDN goes low or 20ms after RESETB goes ++ * high if reset is inserted after PWDN goes high, host can access sensor's ++ * SCCB to initialize sensor." ++ */ ++#define PWDN_ACTIVE_DELAY_MS 20 ++ + #define MIPI_CTRL00_CLOCK_LANE_GATE BIT(5) + #define MIPI_CTRL00_BUS_IDLE BIT(2) + #define MIPI_CTRL00_CLOCK_LANE_DISABLE BIT(0) +@@ -86,6 +94,7 @@ struct ov5647 { + unsigned int height; + int power_count; + struct clk *xclk; ++ struct gpio_desc *pwdn; + }; + + static inline struct ov5647 *to_state(struct v4l2_subdev *sd) +@@ -355,6 +364,11 @@ static int ov5647_sensor_power(struct v4 + if (on && !ov5647->power_count) { + dev_dbg(&client->dev, "OV5647 power on\n"); + ++ if (ov5647->pwdn) { ++ gpiod_set_value(ov5647->pwdn, 0); ++ msleep(PWDN_ACTIVE_DELAY_MS); ++ } ++ + ret = clk_prepare_enable(ov5647->xclk); + if (ret < 0) { + dev_err(&client->dev, "clk prepare enable failed\n"); +@@ -392,6 +406,8 @@ static int ov5647_sensor_power(struct v4 + dev_dbg(&client->dev, "soft stby failed\n"); + + clk_disable_unprepare(ov5647->xclk); ++ ++ gpiod_set_value(ov5647->pwdn, 1); + } + + /* Update the power count. */ +@@ -604,6 +620,10 @@ static int ov5647_probe(struct i2c_clien + return -EINVAL; + } + ++ /* Request the power down GPIO asserted */ ++ sensor->pwdn = devm_gpiod_get_optional(&client->dev, "pwdn", ++ GPIOD_OUT_HIGH); ++ + mutex_init(&sensor->lock); + + sd = &sensor->sd; +@@ -617,7 +637,15 @@ static int ov5647_probe(struct i2c_clien + if (ret < 0) + goto mutex_remove; + ++ if (sensor->pwdn) { ++ gpiod_set_value(sensor->pwdn, 0); ++ msleep(PWDN_ACTIVE_DELAY_MS); ++ } ++ + ret = ov5647_detect(sd); ++ ++ gpiod_set_value(sensor->pwdn, 1); ++ + if (ret < 0) + goto error; + diff --git a/target/linux/brcm2708/patches-4.19/950-0172-drivers-thermal-step_wise-add-support-for-hysteresis.patch b/target/linux/brcm2708/patches-4.19/950-0172-drivers-thermal-step_wise-add-support-for-hysteresis.patch deleted file mode 100644 index 3043559c0f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0172-drivers-thermal-step_wise-add-support-for-hysteresis.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 05a13bbd7fbb76b4f690042173749a55d85de831 Mon Sep 17 00:00:00 2001 -From: Ram Chandrasekar -Date: Mon, 7 May 2018 11:54:08 -0600 -Subject: [PATCH 172/806] drivers: thermal: step_wise: add support for - hysteresis - -From: Ram Chandrasekar - -Step wise governor increases the mitigation level when the temperature -goes above a threshold and will decrease the mitigation when the -temperature falls below the threshold. If it were a case, where the -temperature hovers around a threshold, the mitigation will be applied -and removed at every iteration. This reaction to the temperature is -inefficient for performance. - -The use of hysteresis temperature could avoid this ping-pong of -mitigation by relaxing the mitigation to happen only when the -temperature goes below this lower hysteresis value. - -Signed-off-by: Ram Chandrasekar -Signed-off-by: Lina Iyer ---- - drivers/thermal/step_wise.c | 33 +++++++++++++++++++++++---------- - 1 file changed, 23 insertions(+), 10 deletions(-) - ---- a/drivers/thermal/step_wise.c -+++ b/drivers/thermal/step_wise.c -@@ -36,7 +36,7 @@ - * for this trip point - * d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit - * for this trip point -- * If the temperature is lower than a trip point, -+ * If the temperature is lower than a hysteresis temperature, - * a. if the trend is THERMAL_TREND_RAISING, do nothing - * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling - * state for this trip point, if the cooling state already -@@ -127,7 +127,7 @@ static void update_passive_instance(stru - - static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) - { -- int trip_temp; -+ int trip_temp, hyst_temp; - enum thermal_trip_type trip_type; - enum thermal_trend trend; - struct thermal_instance *instance; -@@ -135,22 +135,23 @@ static void thermal_zone_trip_update(str - int old_target; - - if (trip == THERMAL_TRIPS_NONE) { -- trip_temp = tz->forced_passive; -+ hyst_temp = trip_temp = tz->forced_passive; - trip_type = THERMAL_TRIPS_NONE; - } else { - tz->ops->get_trip_temp(tz, trip, &trip_temp); -+ hyst_temp = trip_temp; -+ if (tz->ops->get_trip_hyst) { -+ tz->ops->get_trip_hyst(tz, trip, &hyst_temp); -+ hyst_temp = trip_temp - hyst_temp; -+ } - tz->ops->get_trip_type(tz, trip, &trip_type); - } - - trend = get_tz_trend(tz, trip); - -- if (tz->temperature >= trip_temp) { -- throttle = true; -- trace_thermal_zone_trip(tz, trip, trip_type); -- } -- -- dev_dbg(&tz->device, "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\n", -- trip, trip_type, trip_temp, trend, throttle); -+ dev_dbg(&tz->device, -+ "Trip%d[type=%d,temp=%d,hyst=%d]:trend=%d,throttle=%d\n", -+ trip, trip_type, trip_temp, hyst_temp, trend, throttle); - - mutex_lock(&tz->lock); - -@@ -159,6 +160,18 @@ static void thermal_zone_trip_update(str - continue; - - old_target = instance->target; -+ throttle = false; -+ /* -+ * Lower the mitigation only if the temperature -+ * goes below the hysteresis temperature. -+ */ -+ if (tz->temperature >= trip_temp || -+ (tz->temperature >= hyst_temp && -+ old_target != THERMAL_NO_TARGET)) { -+ throttle = true; -+ trace_thermal_zone_trip(tz, trip, trip_type); -+ } -+ - instance->target = get_target_state(instance, trend, throttle); - dev_dbg(&instance->cdev->device, "old_target=%d, target=%d\n", - old_target, (int)instance->target); diff --git a/target/linux/brcm2708/patches-4.19/950-0172-media-ov5647-Add-support-for-non-continuous-clock-mo.patch b/target/linux/brcm2708/patches-4.19/950-0172-media-ov5647-Add-support-for-non-continuous-clock-mo.patch new file mode 100644 index 0000000000..edbc12081d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0172-media-ov5647-Add-support-for-non-continuous-clock-mo.patch @@ -0,0 +1,79 @@ +From 79bbd278272416aa61c29bda88e79f8f6dd35903 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:56:47 +0000 +Subject: [PATCH] media: ov5647: Add support for non-continuous clock + mode + +The driver was only supporting continuous clock mode +although this was not stated anywhere. +Non-continuous clock saves a small amount of power and +on some SoCs is easier to interface with. + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/ov5647.c | 17 ++++++++++++++--- + 1 file changed, 14 insertions(+), 3 deletions(-) + +--- a/drivers/media/i2c/ov5647.c ++++ b/drivers/media/i2c/ov5647.c +@@ -44,6 +44,7 @@ + #define PWDN_ACTIVE_DELAY_MS 20 + + #define MIPI_CTRL00_CLOCK_LANE_GATE BIT(5) ++#define MIPI_CTRL00_LINE_SYNC_ENABLE BIT(4) + #define MIPI_CTRL00_BUS_IDLE BIT(2) + #define MIPI_CTRL00_CLOCK_LANE_DISABLE BIT(0) + +@@ -95,6 +96,7 @@ struct ov5647 { + int power_count; + struct clk *xclk; + struct gpio_desc *pwdn; ++ unsigned int flags; + }; + + static inline struct ov5647 *to_state(struct v4l2_subdev *sd) +@@ -269,9 +271,15 @@ static int ov5647_set_virtual_channel(st + + static int ov5647_stream_on(struct v4l2_subdev *sd) + { ++ struct ov5647 *ov5647 = to_state(sd); ++ u8 val = MIPI_CTRL00_BUS_IDLE; + int ret; + +- ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, MIPI_CTRL00_BUS_IDLE); ++ if (ov5647->flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK) ++ val |= MIPI_CTRL00_CLOCK_LANE_GATE | ++ MIPI_CTRL00_LINE_SYNC_ENABLE; ++ ++ ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, val); + if (ret < 0) + return ret; + +@@ -568,7 +576,7 @@ static const struct v4l2_subdev_internal + .open = ov5647_open, + }; + +-static int ov5647_parse_dt(struct device_node *np) ++static int ov5647_parse_dt(struct device_node *np, struct ov5647 *sensor) + { + struct v4l2_fwnode_endpoint bus_cfg; + struct device_node *ep; +@@ -581,6 +589,9 @@ static int ov5647_parse_dt(struct device + + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg); + ++ if (!ret) ++ sensor->flags = bus_cfg.bus.mipi_csi2.flags; ++ + of_node_put(ep); + return ret; + } +@@ -600,7 +611,7 @@ static int ov5647_probe(struct i2c_clien + return -ENOMEM; + + if (IS_ENABLED(CONFIG_OF) && np) { +- ret = ov5647_parse_dt(np); ++ ret = ov5647_parse_dt(np, sensor); + if (ret) { + dev_err(dev, "DT parsing error: %d\n", ret); + return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0173-drivers-thermal-step_wise-avoid-throttling-at-hyster.patch b/target/linux/brcm2708/patches-4.19/950-0173-drivers-thermal-step_wise-avoid-throttling-at-hyster.patch deleted file mode 100644 index 8a07a46d24..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0173-drivers-thermal-step_wise-avoid-throttling-at-hyster.patch +++ /dev/null @@ -1,22 +0,0 @@ -From c7c358c1ac991887b6d2c9193139f9f35a36e985 Mon Sep 17 00:00:00 2001 -From: Serge Schneider -Date: Tue, 2 Oct 2018 11:14:15 +0100 -Subject: [PATCH 173/806] drivers: thermal: step_wise: avoid throttling at - hysteresis temperature after dropping below it - -Signed-off-by: Serge Schneider ---- - drivers/thermal/step_wise.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/step_wise.c -+++ b/drivers/thermal/step_wise.c -@@ -167,7 +167,7 @@ static void thermal_zone_trip_update(str - */ - if (tz->temperature >= trip_temp || - (tz->temperature >= hyst_temp && -- old_target != THERMAL_NO_TARGET)) { -+ old_target == instance->upper)) { - throttle = true; - trace_thermal_zone_trip(tz, trip, trip_type); - } diff --git a/target/linux/brcm2708/patches-4.19/950-0173-media-tc358743-Increase-FIFO-level-to-374.patch b/target/linux/brcm2708/patches-4.19/950-0173-media-tc358743-Increase-FIFO-level-to-374.patch new file mode 100644 index 0000000000..937ac1a65c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0173-media-tc358743-Increase-FIFO-level-to-374.patch @@ -0,0 +1,31 @@ +From 4f1be827b5873b2aaa9003a2d38ba6b941ceb66d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:56:59 +0000 +Subject: [PATCH] media: tc358743: Increase FIFO level to 374. + +The existing fixed value of 16 worked for UYVY 720P60 over +2 lanes at 594MHz, or UYVY 1080P60 over 4 lanes. (RGB888 +1080P60 needs 6 lanes at 594MHz). +It doesn't allow for lower resolutions to work as the FIFO +underflows. + +374 is required for 1080P24-30 UYVY over 2 lanes @ 972Mbit/s, but +>374 means that the FIFO underflows on 1080P50 UYVY over 2 lanes +@ 972Mbit/s. + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/tc358743.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/media/i2c/tc358743.c ++++ b/drivers/media/i2c/tc358743.c +@@ -1946,7 +1946,7 @@ static int tc358743_probe_of(struct tc35 + state->pdata.ddc5v_delay = DDC5V_DELAY_100_MS; + state->pdata.enable_hdcp = false; + /* A FIFO level of 16 should be enough for 2-lane 720p60 at 594 MHz. */ +- state->pdata.fifo_level = 16; ++ state->pdata.fifo_level = 374; + /* + * The PLL input clock is obtained by dividing refclk by pll_prd. + * It must be between 6 MHz and 40 MHz, lower frequency is better. diff --git a/target/linux/brcm2708/patches-4.19/950-0174-hwmon-adjust-rpi-poe-fan-overlay-trip-points.patch b/target/linux/brcm2708/patches-4.19/950-0174-hwmon-adjust-rpi-poe-fan-overlay-trip-points.patch deleted file mode 100644 index 37331d3aa3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0174-hwmon-adjust-rpi-poe-fan-overlay-trip-points.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 018b90a28a06e351dc67db043e9889eeed33120c Mon Sep 17 00:00:00 2001 -From: Serge Schneider -Date: Wed, 26 Sep 2018 19:44:59 +0100 -Subject: [PATCH 174/806] hwmon: adjust rpi-poe-fan overlay trip points - -Signed-off-by: Serge Schneider ---- - .../arm/boot/dts/overlays/rpi-poe-overlay.dts | 26 +++++++------------ - 1 file changed, 9 insertions(+), 17 deletions(-) - ---- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -@@ -14,9 +14,9 @@ - compatible = "raspberrypi,rpi-poe-fan"; - firmware = <&firmware>; - cooling-min-state = <0>; -- cooling-max-state = <3>; -+ cooling-max-state = <2>; - #cooling-cells = <2>; -- cooling-levels = <0 50 150 255>; -+ cooling-levels = <0 150 255>; - status = "okay"; - }; - }; -@@ -26,35 +26,27 @@ - target = <&cpu_thermal>; - __overlay__ { - trips { -- threshold: trip-point@0 { -- temperature = <45000>; -- hysteresis = <5000>; -- type = "active"; -- }; -- target: trip-point@1 { -+ trip0: trip0 { - temperature = <50000>; -- hysteresis = <2000>; -+ hysteresis = <5000>; - type = "active"; - }; -- cpu_hot: cpu_hot@0 { -+ trip1: trip1 { -+ - temperature = <55000>; -- hysteresis = <2000>; -+ hysteresis = <5000>; - type = "active"; - }; - }; - cooling-maps { - map0 { -- trip = <&threshold>; -+ trip = <&trip0>; - cooling-device = <&fan0 0 1>; - }; - map1 { -- trip = <&target>; -+ trip = <&trip1>; - cooling-device = <&fan0 1 2>; - }; -- map2 { -- trip = <&cpu_hot>; -- cooling-device = <&fan0 2 3>; -- }; - }; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0174-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch b/target/linux/brcm2708/patches-4.19/950-0174-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch new file mode 100644 index 0000000000..26d36ea43c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0174-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch @@ -0,0 +1,95 @@ +From f0a4354bf8d99532577a21bb99da792fe2691626 Mon Sep 17 00:00:00 2001 +From: Philipp Zabel +Date: Thu, 21 Sep 2017 17:30:24 +0200 +Subject: [PATCH] media: tc358743: fix connected/active CSI-2 lane + reporting + +g_mbus_config was supposed to indicate all supported lane numbers, not +only the number of those currently in active use. Since the TC358743 +can dynamically reduce the number of active lanes if the required +bandwidth allows for it, report all lane numbers up to the connected +number of lanes as supported in pdata mode. +In device tree mode, do not report lane count and clock mode at all, as +the receiver driver can determine these from the device tree. + +To allow communicating the number of currently active lanes, add a new +bitfield to the v4l2_mbus_config flags. This is a temporary fix, to be +used only until a better solution is found. + +Signed-off-by: Philipp Zabel +--- + drivers/media/i2c/tc358743.c | 30 ++++++++++++++++-------------- + include/media/v4l2-mediabus.h | 8 ++++++++ + 2 files changed, 24 insertions(+), 14 deletions(-) + +--- a/drivers/media/i2c/tc358743.c ++++ b/drivers/media/i2c/tc358743.c +@@ -1606,28 +1606,29 @@ static int tc358743_g_mbus_config(struct + struct v4l2_mbus_config *cfg) + { + struct tc358743_state *state = to_state(sd); ++ const u32 mask = V4L2_MBUS_CSI2_LANE_MASK; ++ ++ if (state->csi_lanes_in_use > state->bus.num_data_lanes) ++ return -EINVAL; + + cfg->type = V4L2_MBUS_CSI2; ++ cfg->flags = (state->csi_lanes_in_use << __ffs(mask)) & mask; ++ ++ /* In DT mode, only report the number of active lanes */ ++ if (sd->dev->of_node) ++ return 0; + +- /* Support for non-continuous CSI-2 clock is missing in the driver */ +- cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; ++ /* Support for non-continuous CSI-2 clock is missing in pdata mode */ ++ cfg->flags |= V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; + +- switch (state->csi_lanes_in_use) { +- case 1: ++ if (state->bus.num_data_lanes > 0) + cfg->flags |= V4L2_MBUS_CSI2_1_LANE; +- break; +- case 2: ++ if (state->bus.num_data_lanes > 1) + cfg->flags |= V4L2_MBUS_CSI2_2_LANE; +- break; +- case 3: ++ if (state->bus.num_data_lanes > 2) + cfg->flags |= V4L2_MBUS_CSI2_3_LANE; +- break; +- case 4: ++ if (state->bus.num_data_lanes > 3) + cfg->flags |= V4L2_MBUS_CSI2_4_LANE; +- break; +- default: +- return -EINVAL; +- } + + return 0; + } +@@ -2052,6 +2053,7 @@ static int tc358743_probe(struct i2c_cli + if (pdata) { + state->pdata = *pdata; + state->bus.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; ++ state->bus.num_data_lanes = 4; + } else { + err = tc358743_probe_of(state); + if (err == -ENODEV) +--- a/include/media/v4l2-mediabus.h ++++ b/include/media/v4l2-mediabus.h +@@ -67,6 +67,14 @@ + V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE) + #define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \ + V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3) ++/* ++ * Number of lanes in use, 0 == use all available lanes (default) ++ * ++ * This is a temporary fix for devices that need to reduce the number of active ++ * lanes for certain modes, until g_mbus_config() can be replaced with a better ++ * solution. ++ */ ++#define V4L2_MBUS_CSI2_LANE_MASK (0xf << 10) + + /** + * enum v4l2_mbus_type - media bus type diff --git a/target/linux/brcm2708/patches-4.19/950-0175-media-tc358743-Add-support-for-972Mbit-s-link-freq.patch b/target/linux/brcm2708/patches-4.19/950-0175-media-tc358743-Add-support-for-972Mbit-s-link-freq.patch new file mode 100644 index 0000000000..89d389c9c1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0175-media-tc358743-Add-support-for-972Mbit-s-link-freq.patch @@ -0,0 +1,79 @@ +From 745b0fc9c914437695c6098daecd311b2cd88204 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:57:21 +0000 +Subject: [PATCH] media: tc358743: Add support for 972Mbit/s link freq. + +Adds register setups for running the CSI lanes at 972Mbit/s, +which allows 1080P50 UYVY down 2 lanes. + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/tc358743.c | 47 +++++++++++++++++++++++++----------- + 1 file changed, 33 insertions(+), 14 deletions(-) + +--- a/drivers/media/i2c/tc358743.c ++++ b/drivers/media/i2c/tc358743.c +@@ -1967,6 +1967,7 @@ static int tc358743_probe_of(struct tc35 + /* + * The CSI bps per lane must be between 62.5 Mbps and 1 Gbps. + * The default is 594 Mbps for 4-lane 1080p60 or 2-lane 720p60. ++ * 972 Mbps allows 1080P50 UYVY over 2-lane. + */ + bps_pr_lane = 2 * endpoint->link_frequencies[0]; + if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) { +@@ -1979,23 +1980,41 @@ static int tc358743_probe_of(struct tc35 + state->pdata.refclk_hz * state->pdata.pll_prd; + + /* +- * FIXME: These timings are from REF_02 for 594 Mbps per lane (297 MHz +- * link frequency). In principle it should be possible to calculate ++ * FIXME: These timings are from REF_02 for 594 or 972 Mbps per lane ++ * (297 MHz or 486 MHz link frequency). ++ * In principle it should be possible to calculate + * them based on link frequency and resolution. + */ +- if (bps_pr_lane != 594000000U) ++ switch (bps_pr_lane) { ++ default: + dev_warn(dev, "untested bps per lane: %u bps\n", bps_pr_lane); +- state->pdata.lineinitcnt = 0xe80; +- state->pdata.lptxtimecnt = 0x003; +- /* tclk-preparecnt: 3, tclk-zerocnt: 20 */ +- state->pdata.tclk_headercnt = 0x1403; +- state->pdata.tclk_trailcnt = 0x00; +- /* ths-preparecnt: 3, ths-zerocnt: 1 */ +- state->pdata.ths_headercnt = 0x0103; +- state->pdata.twakeup = 0x4882; +- state->pdata.tclk_postcnt = 0x008; +- state->pdata.ths_trailcnt = 0x2; +- state->pdata.hstxvregcnt = 0; ++ case 594000000U: ++ state->pdata.lineinitcnt = 0xe80; ++ state->pdata.lptxtimecnt = 0x003; ++ /* tclk-preparecnt: 3, tclk-zerocnt: 20 */ ++ state->pdata.tclk_headercnt = 0x1403; ++ state->pdata.tclk_trailcnt = 0x00; ++ /* ths-preparecnt: 3, ths-zerocnt: 1 */ ++ state->pdata.ths_headercnt = 0x0103; ++ state->pdata.twakeup = 0x4882; ++ state->pdata.tclk_postcnt = 0x008; ++ state->pdata.ths_trailcnt = 0x2; ++ state->pdata.hstxvregcnt = 0; ++ break; ++ case 972000000U: ++ state->pdata.lineinitcnt = 0x1b58; ++ state->pdata.lptxtimecnt = 0x007; ++ /* tclk-preparecnt: 6, tclk-zerocnt: 40 */ ++ state->pdata.tclk_headercnt = 0x2806; ++ state->pdata.tclk_trailcnt = 0x00; ++ /* ths-preparecnt: 6, ths-zerocnt: 8 */ ++ state->pdata.ths_headercnt = 0x0806; ++ state->pdata.twakeup = 0x4268; ++ state->pdata.tclk_postcnt = 0x008; ++ state->pdata.ths_trailcnt = 0x5; ++ state->pdata.hstxvregcnt = 0; ++ break; ++ } + + state->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_LOW); diff --git a/target/linux/brcm2708/patches-4.19/950-0175-overlays-add-overrides-for-PoE-HAT-fan-control.patch b/target/linux/brcm2708/patches-4.19/950-0175-overlays-add-overrides-for-PoE-HAT-fan-control.patch deleted file mode 100644 index e795df16fd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0175-overlays-add-overrides-for-PoE-HAT-fan-control.patch +++ /dev/null @@ -1,50 +0,0 @@ -From a6593a1bc8708f73c424c05c64d49d3868e1bdd5 Mon Sep 17 00:00:00 2001 -From: Serge Schneider -Date: Tue, 2 Oct 2018 17:13:48 +0100 -Subject: [PATCH 175/806] overlays: add overrides for PoE HAT fan control - -Signed-off-by: Serge Schneider ---- - arch/arm/boot/dts/overlays/README | 13 ++++++++++--- - arch/arm/boot/dts/overlays/rpi-poe-overlay.dts | 10 ++++++++++ - 2 files changed, 20 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1565,9 +1565,16 @@ Params: touchscreen-size-x Touchscr - - - Name: rpi-poe --Info: Raspberry Pi POE HAT --Load: dtoverlay=rpi-poe --Params: -+Info: Raspberry Pi PoE HAT fan -+Load: dtoverlay=rpi-poe,[=] -+Params: poe_fan_temp0 Temperature (in millicelcius) at which the fan -+ turns on (default 50000) -+ poe_fan_temp0_hyst Temperature delta (in millicelcius) at which -+ the fan turns off (default 5000) -+ poe_fan_temp1 Temperature (in millicelcius) at which the fan -+ speeds up (default 55000) -+ poe_fan_temp1_hyst Temperature delta (in millicelcius) at which -+ the fan slows down (default 5000) - - - Name: rpi-proto ---- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -@@ -50,4 +50,14 @@ - }; - }; - }; -+ -+ fragment@2 { -+ target-path = "/__overrides__"; -+ __overlay__ { -+ poe_fan_temp0 = <&trip0>,"temperature:0"; -+ poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; -+ poe_fan_temp1 = <&trip1>,"temperature:0"; -+ poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; -+ }; -+ }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0176-media-tc358743-Check-I2C-succeeded-during-probe.patch b/target/linux/brcm2708/patches-4.19/950-0176-media-tc358743-Check-I2C-succeeded-during-probe.patch new file mode 100644 index 0000000000..6cb1134b9d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0176-media-tc358743-Check-I2C-succeeded-during-probe.patch @@ -0,0 +1,98 @@ +From 6e089b7c2526037b0eaf9ecaed4d38957f33c19c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:57:34 +0000 +Subject: [PATCH] media: tc358743: Check I2C succeeded during probe. + +The probe for the TC358743 reads the CHIPID register from +the device and compares it to the expected value of 0. +If the I2C request fails then that also returns 0, so +the driver loads thinking that the device is there. + +Generally I2C communications are reliable so there is +limited need to check the return value on every transfer, +therefore only amend the one read during probe to check +for I2C errors. + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/tc358743.c | 27 +++++++++++++++++++++++---- + 1 file changed, 23 insertions(+), 4 deletions(-) + +--- a/drivers/media/i2c/tc358743.c ++++ b/drivers/media/i2c/tc358743.c +@@ -110,7 +110,7 @@ static inline struct tc358743_state *to_ + + /* --------------- I2C --------------- */ + +-static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) ++static int i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) + { + struct tc358743_state *state = to_state(sd); + struct i2c_client *client = state->i2c_client; +@@ -136,6 +136,7 @@ static void i2c_rd(struct v4l2_subdev *s + v4l2_err(sd, "%s: reading register 0x%x from 0x%x failed\n", + __func__, reg, client->addr); + } ++ return err != ARRAY_SIZE(msgs); + } + + static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) +@@ -192,15 +193,24 @@ static void i2c_wr(struct v4l2_subdev *s + } + } + +-static noinline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n) ++static noinline u32 i2c_rdreg_err(struct v4l2_subdev *sd, u16 reg, u32 n, ++ int *err) + { ++ int error; + __le32 val = 0; + +- i2c_rd(sd, reg, (u8 __force *)&val, n); ++ error = i2c_rd(sd, reg, (u8 __force *)&val, n); ++ if (err) ++ *err = error; + + return le32_to_cpu(val); + } + ++static inline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n) ++{ ++ return i2c_rdreg_err(sd, reg, n, NULL); ++} ++ + static noinline void i2c_wrreg(struct v4l2_subdev *sd, u16 reg, u32 val, u32 n) + { + __le32 raw = cpu_to_le32(val); +@@ -229,6 +239,13 @@ static u16 i2c_rd16(struct v4l2_subdev * + return i2c_rdreg(sd, reg, 2); + } + ++static int i2c_rd16_err(struct v4l2_subdev *sd, u16 reg, u16 *value) ++{ ++ int err; ++ *value = i2c_rdreg_err(sd, reg, 2, &err); ++ return err; ++} ++ + static void i2c_wr16(struct v4l2_subdev *sd, u16 reg, u16 val) + { + i2c_wrreg(sd, reg, val, 2); +@@ -2054,6 +2071,7 @@ static int tc358743_probe(struct i2c_cli + struct tc358743_platform_data *pdata = client->dev.platform_data; + struct v4l2_subdev *sd; + u16 irq_mask = MASK_HDMI_MSK | MASK_CSI_MSK; ++ u16 chipid; + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) +@@ -2086,7 +2104,8 @@ static int tc358743_probe(struct i2c_cli + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; + + /* i2c access */ +- if ((i2c_rd16(sd, CHIPID) & MASK_CHIPID) != 0) { ++ if (i2c_rd16_err(sd, CHIPID, &chipid) || ++ (chipid & MASK_CHIPID) != 0) { + v4l2_info(sd, "not a TC358743 on address 0x%x\n", + client->addr << 1); + return -ENODEV; diff --git a/target/linux/brcm2708/patches-4.19/950-0176-overlays-Add-gpio-no-bank0-irq-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0176-overlays-Add-gpio-no-bank0-irq-overlay.patch deleted file mode 100644 index 06026de969..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0176-overlays-Add-gpio-no-bank0-irq-overlay.patch +++ /dev/null @@ -1,60 +0,0 @@ -From afe88750090d60d94b365250968e116ec88448c1 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 18 Jul 2018 17:25:00 +0100 -Subject: [PATCH 176/806] overlays: Add gpio-no-bank0-irq overlay - -See: https://github.com/raspberrypi/linux/issues/2590 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 9 +++++++++ - .../dts/overlays/gpio-no-bank0-irq-overlay.dts | 14 ++++++++++++++ - 3 files changed, 24 insertions(+) - create mode 100755 arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -37,6 +37,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - gpio-ir.dtbo \ - gpio-ir-tx.dtbo \ - gpio-key.dtbo \ -+ gpio-no-bank0-irq.dtbo \ - gpio-no-irq.dtbo \ - gpio-poweroff.dtbo \ - gpio-shutdown.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -597,6 +597,15 @@ Params: gpio GPIO pin - keycode Set the key code for the button - - -+Name: gpio-no-bank0-irq -+Info: Use this overlay to disable GPIO interrupts for GPIOs in bank 0 (0-27), -+ which can be useful for UIO drivers. -+ N.B. Using this overlay will trigger a kernel WARN during booting, but -+ this can safely be ignored - the system should work as expected. -+Load: dtoverlay=gpio-no-bank0-irq -+Params: -+ -+ - Name: gpio-no-irq - Info: Use this overlay to disable all GPIO interrupts, which can be useful - for user-space GPIO edge detection systems. ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts -@@ -0,0 +1,14 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ // Configure the gpio pin controller -+ target = <&gpio>; -+ __overlay__ { -+ interrupts = <255 255>, <2 18>; -+ }; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0177-Add-hy28b-2017-model-device-tree-overlay-2721.patch b/target/linux/brcm2708/patches-4.19/950-0177-Add-hy28b-2017-model-device-tree-overlay-2721.patch deleted file mode 100644 index a5914a5a77..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0177-Add-hy28b-2017-model-device-tree-overlay-2721.patch +++ /dev/null @@ -1,209 +0,0 @@ -From a64595c1bc19752dca712c6cd90692a2a0e7397b Mon Sep 17 00:00:00 2001 -From: Hans-Wilhelm Warlo <5417271+hanswilw@users.noreply.github.com> -Date: Tue, 16 Oct 2018 18:20:48 +0200 -Subject: [PATCH 177/806] Add hy28b 2017 model device tree overlay (#2721) - -The 2017 version of the hy28b display requires a different -initialisation sequence. - -Signed-off-by: Hans-Wilhelm Warlo ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 19 +++ - .../boot/dts/overlays/hy28b-2017-overlay.dts | 152 ++++++++++++++++++ - 3 files changed, 172 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -49,6 +49,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - hifiberry-digi-pro.dtbo \ - hy28a.dtbo \ - hy28b.dtbo \ -+ hy28b-2017.dtbo \ - i2c-bcm2708.dtbo \ - i2c-gpio.dtbo \ - i2c-mux.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -770,6 +770,25 @@ Params: speed Display - ledgpio GPIO used to control backlight - - -+Name: hy28b-2017 -+Info: HY28B 2017 version - 2.8" TFT LCD Display Module by HAOYU Electronics -+ Default values match Texy's display shield -+Load: dtoverlay=hy28b-2017,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ resetgpio GPIO used to reset controller -+ -+ ledgpio GPIO used to control backlight -+ -+ - Name: i2c-bcm2708 - Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus. - Load: dtoverlay=i2c-bcm2708 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts -@@ -0,0 +1,152 @@ -+/* -+ * Device Tree overlay for HY28b display shield by Texy. -+ * Modified for 2017 version with ILI9325 D chip -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ hy28b_pins: hy28b_pins { -+ brcm,pins = <17 25 18>; -+ brcm,function = <0 1 1>; /* in out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hy28b: hy28b@0{ -+ compatible = "ilitek,ili9325"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&hy28b_pins>; -+ -+ spi-max-frequency = <48000000>; -+ spi-cpol; -+ spi-cpha; -+ rotate = <270>; -+ bgr; -+ fps = <50>; -+ buswidth = <8>; -+ startbyte = <0x70>; -+ reset-gpios = <&gpio 25 0>; -+ led-gpios = <&gpio 18 1>; -+ -+ init = <0x10000e5 0x78F0 -+ 0x1000001 0x0100 -+ 0x1000002 0x0700 -+ 0x1000003 0x1030 -+ 0x1000004 0x0000 -+ 0x1000008 0x0207 -+ 0x1000009 0x0000 -+ 0x100000a 0x0000 -+ 0x100000c 0x0000 -+ 0x100000d 0x0000 -+ 0x100000f 0x0000 -+ 0x1000010 0x0000 -+ 0x1000011 0x0007 -+ 0x1000012 0x0000 -+ 0x1000013 0x0000 -+ 0x1000007 0x0001 -+ 0x2000032 -+ 0x2000032 -+ 0x2000032 -+ 0x2000032 -+ 0x1000010 0x1090 -+ 0x1000011 0x0227 -+ 0x2000032 -+ 0x1000012 0x001f -+ 0x2000032 -+ 0x1000013 0x1500 -+ 0x1000029 0x0027 -+ 0x100002b 0x000d -+ 0x2000032 -+ 0x1000020 0x0000 -+ 0x1000021 0x0000 -+ 0x2000032 -+ 0x1000030 0x0000 -+ 0x1000031 0x0707 -+ 0x1000032 0x0307 -+ 0x1000035 0x0200 -+ 0x1000036 0x0008 -+ 0x1000037 0x0004 -+ 0x1000038 0x0000 -+ 0x1000039 0x0707 -+ 0x100003c 0x0002 -+ 0x100003d 0x1d04 -+ 0x1000050 0x0000 -+ 0x1000051 0x00ef -+ 0x1000052 0x0000 -+ 0x1000053 0x013f -+ 0x1000060 0xa700 -+ 0x1000061 0x0001 -+ 0x100006a 0x0000 -+ 0x1000080 0x0000 -+ 0x1000081 0x0000 -+ 0x1000082 0x0000 -+ 0x1000083 0x0000 -+ 0x1000084 0x0000 -+ 0x1000085 0x0000 -+ 0x1000090 0x0010 -+ 0x1000092 0x0600 -+ 0x1000007 0x0133>; -+ debug = <0>; -+ }; -+ -+ hy28b_ts: hy28b-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&hy28b>,"spi-max-frequency:0"; -+ rotate = <&hy28b>,"rotate:0"; -+ fps = <&hy28b>,"fps:0"; -+ debug = <&hy28b>,"debug:0"; -+ xohms = <&hy28b_ts>,"ti,x-plate-ohms;0"; -+ resetgpio = <&hy28b>,"reset-gpios:4", -+ <&hy28b_pins>, "brcm,pins:4"; -+ ledgpio = <&hy28b>,"led-gpios:4", -+ <&hy28b_pins>, "brcm,pins:8"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0177-media-adv7180-Default-to-the-first-valid-input.patch b/target/linux/brcm2708/patches-4.19/950-0177-media-adv7180-Default-to-the-first-valid-input.patch new file mode 100644 index 0000000000..65108f9710 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0177-media-adv7180-Default-to-the-first-valid-input.patch @@ -0,0 +1,45 @@ +From 1d6cba1999607bc911ee8d16323914058b06e8d8 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:57:46 +0000 +Subject: [PATCH] media: adv7180: Default to the first valid input + +The hardware default is differential CVBS on AIN1 & 2, which +isn't very useful. + +Select the first input that is defined as valid for the +chip variant (typically CVBS_AIN1). + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/adv7180.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/media/i2c/adv7180.c ++++ b/drivers/media/i2c/adv7180.c +@@ -1240,6 +1240,7 @@ static const struct adv7180_chip_info ad + static int init_device(struct adv7180_state *state) + { + int ret; ++ int i; + + mutex_lock(&state->mutex); + +@@ -1286,6 +1287,18 @@ static int init_device(struct adv7180_st + goto out_unlock; + } + ++ /* Select first valid input */ ++ for (i = 0; i < 32; i++) { ++ if (BIT(i) & state->chip_info->valid_input_mask) { ++ ret = state->chip_info->select_input(state, i); ++ ++ if (ret == 0) { ++ state->input = i; ++ break; ++ } ++ } ++ } ++ + out_unlock: + mutex_unlock(&state->mutex); + diff --git a/target/linux/brcm2708/patches-4.19/950-0178-media-adv7180-Add-YPrPb-support-for-ADV7282M.patch b/target/linux/brcm2708/patches-4.19/950-0178-media-adv7180-Add-YPrPb-support-for-ADV7282M.patch new file mode 100644 index 0000000000..0dcd6771d0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0178-media-adv7180-Add-YPrPb-support-for-ADV7282M.patch @@ -0,0 +1,24 @@ +From b8a3ce970a70543aadd4b49a102b5cdaf2a62ed7 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:57:56 +0000 +Subject: [PATCH] media: adv7180: Add YPrPb support for ADV7282M + +The ADV7282M can support YPbPr on AIN1-3, but this was +not selectable from the driver. Add it to the list of +supported input modes. + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/adv7180.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/media/i2c/adv7180.c ++++ b/drivers/media/i2c/adv7180.c +@@ -1229,6 +1229,7 @@ static const struct adv7180_chip_info ad + BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | + BIT(ADV7182_INPUT_SVIDEO_AIN3_AIN4) | + BIT(ADV7182_INPUT_SVIDEO_AIN7_AIN8) | ++ BIT(ADV7182_INPUT_YPRPB_AIN1_AIN2_AIN3) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN3_AIN4) | + BIT(ADV7182_INPUT_DIFF_CVBS_AIN7_AIN8), diff --git a/target/linux/brcm2708/patches-4.19/950-0179-media-videodev2-Add-helper-defines-for-printing-FOUR.patch b/target/linux/brcm2708/patches-4.19/950-0179-media-videodev2-Add-helper-defines-for-printing-FOUR.patch new file mode 100644 index 0000000000..5f394a9bd1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0179-media-videodev2-Add-helper-defines-for-printing-FOUR.patch @@ -0,0 +1,28 @@ +From a7b5d64ec5cb63b6cf5f3eb8fd3bfa22f86d36c4 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:58:08 +0000 +Subject: [PATCH] media: videodev2: Add helper defines for printing + FOURCCs + +New helper defines that allow printing of a FOURCC using +printf(V4L2_FOURCC_CONV, V4L2_FOURCC_CONV_ARGS(fourcc)); + +Signed-off-by: Dave Stevenson +--- + include/uapi/linux/videodev2.h | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/include/uapi/linux/videodev2.h ++++ b/include/uapi/linux/videodev2.h +@@ -82,6 +82,11 @@ + ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24)) + #define v4l2_fourcc_be(a, b, c, d) (v4l2_fourcc(a, b, c, d) | (1 << 31)) + ++#define V4L2_FOURCC_CONV "%c%c%c%c%s" ++#define V4L2_FOURCC_CONV_ARGS(fourcc) \ ++ (fourcc) & 0x7f, ((fourcc) >> 8) & 0x7f, ((fourcc) >> 16) & 0x7f, \ ++ ((fourcc) >> 24) & 0x7f, (fourcc) & BIT(31) ? "-BE" : "" ++ + /* + * E N U M S + */ diff --git a/target/linux/brcm2708/patches-4.19/950-0179-mmc-bcm2835-sdhost-Recover-from-MMC_SEND_EXT_CSD.patch b/target/linux/brcm2708/patches-4.19/950-0179-mmc-bcm2835-sdhost-Recover-from-MMC_SEND_EXT_CSD.patch deleted file mode 100644 index 1b1f6da04c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0179-mmc-bcm2835-sdhost-Recover-from-MMC_SEND_EXT_CSD.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 5010dba0e3f6f2c9d623e265276d9b6993fa96b0 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 26 Oct 2018 17:29:51 +0100 -Subject: [PATCH 179/806] mmc/bcm2835-sdhost: Recover from MMC_SEND_EXT_CSD - -If the user issues an "mmc extcsd read", the SD controller receives -what it thinks is a SEND_IF_COND command with an unexpected data block. -The resulting operations leave the FSM stuck in READWAIT, a state which -persists until the MMC framework resets the controller, by which point -the root filesystem is likely to have been unmounted. - -A less heavyweight solution is to detect the condition and nudge the -FSM by asserting the (self-clearing) FORCE_DATA_MODE bit. - -N.B. This workaround was essentially discovered by accident and without -a full understanding the inner workings of the controller, so it is -fortunate that the "fix" only modifies error paths. - -See: https://github.com/raspberrypi/linux/issues/2728 - -Signed-off-by: Phil Elwell ---- - drivers/mmc/host/bcm2835-sdhost.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/drivers/mmc/host/bcm2835-sdhost.c -+++ b/drivers/mmc/host/bcm2835-sdhost.c -@@ -1244,6 +1244,8 @@ static void bcm2835_sdhost_finish_comman - pr_info("%s: ignoring CRC7 error for CMD1\n", - mmc_hostname(host->mmc)); - } else { -+ u32 edm, fsm; -+ - if (sdhsts & SDHSTS_CMD_TIME_OUT) { - if (host->debug) - pr_warn("%s: command %d timeout\n", -@@ -1256,6 +1258,13 @@ static void bcm2835_sdhost_finish_comman - host->cmd->opcode); - host->cmd->error = -EILSEQ; - } -+ -+ edm = readl(host->ioaddr + SDEDM); -+ fsm = edm & SDEDM_FSM_MASK; -+ if (fsm == SDEDM_FSM_READWAIT || -+ fsm == SDEDM_FSM_WRITESTART1) -+ writel(edm | SDEDM_FORCE_DATA_MODE, -+ host->ioaddr + SDEDM); - tasklet_schedule(&host->finish_tasklet); - return; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0180-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch b/target/linux/brcm2708/patches-4.19/950-0180-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch new file mode 100644 index 0000000000..77fdd348d9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0180-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch @@ -0,0 +1,103 @@ +From 8299df54f2016290eed7a2bece3885aad36d13e2 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:59:06 +0000 +Subject: [PATCH] dt-bindings: Document BCM283x CSI2/CCP2 receiver + +Document the DT bindings for the CSI2/CCP2 receiver peripheral +(known as Unicam) on BCM283x SoCs. + +Signed-off-by: Dave Stevenson +Acked-by: Rob Herring +--- + .../bindings/media/bcm2835-unicam.txt | 85 +++++++++++++++++++ + 1 file changed, 85 insertions(+) + create mode 100644 Documentation/devicetree/bindings/media/bcm2835-unicam.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/media/bcm2835-unicam.txt +@@ -0,0 +1,85 @@ ++Broadcom BCM283x Camera Interface (Unicam) ++------------------------------------------ ++ ++The Unicam block on BCM283x SoCs is the receiver for either ++CSI-2 or CCP2 data from image sensors or similar devices. ++ ++The main platform using this SoC is the Raspberry Pi family of boards. ++On the Pi the VideoCore firmware can also control this hardware block, ++and driving it from two different processors will cause issues. ++To avoid this, the firmware checks the device tree configuration ++during boot. If it finds device tree nodes called csi0 or csi1 then ++it will stop the firmware accessing the block, and it can then ++safely be used via the device tree binding. ++ ++Required properties: ++=================== ++- compatible : must be "brcm,bcm2835-unicam". ++- reg : physical base address and length of the register sets for the ++ device. ++- interrupts : should contain the IRQ line for this Unicam instance. ++- clocks : list of clock specifiers, corresponding to entries in ++ clock-names property. ++- clock-names : must contain an "lp" entry, matching entries in the ++ clocks property. ++ ++Unicam supports a single port node. It should contain one 'port' child node ++with child 'endpoint' node. Please refer to the bindings defined in ++Documentation/devicetree/bindings/media/video-interfaces.txt. ++ ++Within the endpoint node the "remote-endpoint" and "data-lanes" properties ++are mandatory. ++Data lane reordering is not supported so the data lanes must be in order, ++starting at 1. The number of data lanes should represent the number of ++usable lanes for the hardware block. That may be limited by either the SoC or ++how the platform presents the interface, and the lower value must be used. ++ ++Lane reordering is not supported on the clock lane either, so the optional ++property "clock-lane" will implicitly be <0>. ++Similarly lane inversion is not supported, therefore "lane-polarities" will ++implicitly be <0 0 0 0 0>. ++Neither of these values will be checked. ++ ++Example: ++ csi1: csi1@7e801000 { ++ compatible = "brcm,bcm2835-unicam"; ++ reg = <0x7e801000 0x800>, ++ <0x7e802004 0x4>; ++ interrupts = <2 7>; ++ clocks = <&clocks BCM2835_CLOCK_CAM1>; ++ clock-names = "lp"; ++ ++ port { ++ csi1_ep: endpoint { ++ remote-endpoint = <&tc358743_0>; ++ data-lanes = <1 2>; ++ }; ++ }; ++ }; ++ ++ i2c0: i2c@7e205000 { ++ tc358743: csi-hdmi-bridge@0f { ++ compatible = "toshiba,tc358743"; ++ reg = <0x0f>; ++ ++ clocks = <&tc358743_clk>; ++ clock-names = "refclk"; ++ ++ tc358743_clk: bridge-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <27000000>; ++ }; ++ ++ port { ++ tc358743_0: endpoint { ++ remote-endpoint = <&csi1_ep>; ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ clock-noncontinuous; ++ link-frequencies = ++ /bits/ 64 <297000000>; ++ }; ++ }; ++ }; ++ }; diff --git a/target/linux/brcm2708/patches-4.19/950-0180-overlays-pi3-disable-bt-Clear-out-bt_pins-node.patch b/target/linux/brcm2708/patches-4.19/950-0180-overlays-pi3-disable-bt-Clear-out-bt_pins-node.patch deleted file mode 100644 index 73e69c69c9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0180-overlays-pi3-disable-bt-Clear-out-bt_pins-node.patch +++ /dev/null @@ -1,33 +0,0 @@ -From c0c9a631e7ca58cc31aafb14920c559552d3b810 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 29 Oct 2018 10:38:31 +0000 -Subject: [PATCH 180/806] overlays: pi3-disable-bt: Clear out bt_pins node - -The pi3-disable-bt overlay does not (and cannot) delete the bt_pins -node, but emptying its properties (including brcm,pins) is a way of -signalling to the hciuart systemd service that Bluetooth has been -disabled. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts -@@ -37,6 +37,15 @@ - }; - - fragment@3 { -+ target = <&bt_pins>; -+ __overlay__ { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ }; -+ -+ fragment@4 { - target-path = "/aliases"; - __overlay__ { - serial0 = "/soc/serial@7e201000"; diff --git a/target/linux/brcm2708/patches-4.19/950-0181-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch b/target/linux/brcm2708/patches-4.19/950-0181-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch deleted file mode 100644 index 3809a7a9cb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0181-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 0557d41d861b8c214b3472749482efdc71363dbb Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 29 Oct 2018 14:45:45 +0000 -Subject: [PATCH 181/806] Revert "rtc: pcf8523: properly handle oscillator stop - bit" - -This reverts commit ede44c908d44b166a5b6bd7caacd105c2ff5a70f. - -See: https://github.com/raspberrypi/firmware/issues/1065 - -Signed-off-by: Phil Elwell ---- - drivers/rtc/rtc-pcf8523.c | 25 ++++++++++++++++++++++--- - 1 file changed, 22 insertions(+), 3 deletions(-) - ---- a/drivers/rtc/rtc-pcf8523.c -+++ b/drivers/rtc/rtc-pcf8523.c -@@ -212,8 +212,28 @@ static int pcf8523_rtc_read_time(struct - if (err < 0) - return err; - -- if (regs[0] & REG_SECONDS_OS) -- return -EINVAL; -+ if (regs[0] & REG_SECONDS_OS) { -+ /* -+ * If the oscillator was stopped, try to clear the flag. Upon -+ * power-up the flag is always set, but if we cannot clear it -+ * the oscillator isn't running properly for some reason. The -+ * sensible thing therefore is to return an error, signalling -+ * that the clock cannot be assumed to be correct. -+ */ -+ -+ regs[0] &= ~REG_SECONDS_OS; -+ -+ err = pcf8523_write(client, REG_SECONDS, regs[0]); -+ if (err < 0) -+ return err; -+ -+ err = pcf8523_read(client, REG_SECONDS, ®s[0]); -+ if (err < 0) -+ return err; -+ -+ if (regs[0] & REG_SECONDS_OS) -+ return -EAGAIN; -+ } - - tm->tm_sec = bcd2bin(regs[0] & 0x7f); - tm->tm_min = bcd2bin(regs[1] & 0x7f); -@@ -249,7 +269,6 @@ static int pcf8523_rtc_set_time(struct d - return err; - - regs[0] = REG_SECONDS; -- /* This will purposely overwrite REG_SECONDS_OS */ - regs[1] = bin2bcd(tm->tm_sec); - regs[2] = bin2bcd(tm->tm_min); - regs[3] = bin2bcd(tm->tm_hour); diff --git a/target/linux/brcm2708/patches-4.19/950-0181-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch b/target/linux/brcm2708/patches-4.19/950-0181-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch new file mode 100644 index 0000000000..7c857c4631 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0181-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch @@ -0,0 +1,2437 @@ +From 7b7027a39b981e3d72a5876274e857615d5149e1 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 14:59:22 +0000 +Subject: [PATCH] media: bcm2835-unicam: Driver for CCP2/CSI2 camera + interface + +Add driver for the Unicam camera receiver block on +BCM283x processors. + +Signed-off-by: Dave Stevenson +--- + drivers/media/platform/Kconfig | 1 + + drivers/media/platform/Makefile | 2 + + drivers/media/platform/bcm2835/Kconfig | 14 + + drivers/media/platform/bcm2835/Makefile | 3 + + .../media/platform/bcm2835/bcm2835-unicam.c | 2101 +++++++++++++++++ + .../media/platform/bcm2835/vc4-regs-unicam.h | 266 +++ + 6 files changed, 2387 insertions(+) + create mode 100644 drivers/media/platform/bcm2835/Kconfig + create mode 100644 drivers/media/platform/bcm2835/Makefile + create mode 100644 drivers/media/platform/bcm2835/bcm2835-unicam.c + create mode 100644 drivers/media/platform/bcm2835/vc4-regs-unicam.h + +--- a/drivers/media/platform/Kconfig ++++ b/drivers/media/platform/Kconfig +@@ -137,6 +137,7 @@ source "drivers/media/platform/am437x/Kc + source "drivers/media/platform/xilinx/Kconfig" + source "drivers/media/platform/rcar-vin/Kconfig" + source "drivers/media/platform/atmel/Kconfig" ++source "drivers/media/platform/bcm2835/Kconfig" + + config VIDEO_TI_CAL + tristate "TI CAL (Camera Adaptation Layer) driver" +--- a/drivers/media/platform/Makefile ++++ b/drivers/media/platform/Makefile +@@ -96,3 +96,5 @@ obj-$(CONFIG_VIDEO_QCOM_VENUS) += qcom/ + obj-y += meson/ + + obj-y += cros-ec-cec/ ++ ++obj-y += bcm2835/ +--- /dev/null ++++ b/drivers/media/platform/bcm2835/Kconfig +@@ -0,0 +1,14 @@ ++# Broadcom VideoCore4 V4L2 camera support ++ ++config VIDEO_BCM2835_UNICAM ++ tristate "Broadcom BCM2835 Unicam video capture driver" ++ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API ++ depends on ARCH_BCM2835 || COMPILE_TEST ++ select VIDEOBUF2_DMA_CONTIG ++ select V4L2_FWNODE ++ help ++ Say Y here to enable V4L2 subdevice for CSI2 receiver. ++ This is a V4L2 subdevice that interfaces directly to the VC4 peripheral. ++ ++ To compile this driver as a module, choose M here. The module ++ will be called bcm2835-unicam. +--- /dev/null ++++ b/drivers/media/platform/bcm2835/Makefile +@@ -0,0 +1,3 @@ ++# Makefile for BCM2835 Unicam driver ++ ++obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o +--- /dev/null ++++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c +@@ -0,0 +1,2101 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * BCM2835 Unicam capture Driver ++ * ++ * Copyright (C) 2017 - Raspberry Pi (Trading) Ltd. ++ * ++ * Dave Stevenson ++ * ++ * Based on TI am437x driver by Benoit Parrot and Lad, Prabhakar and ++ * TI CAL camera interface driver by Benoit Parrot. ++ * ++ * ++ * There are two camera drivers in the kernel for BCM283x - this one ++ * and bcm2835-camera (currently in staging). ++ * ++ * This driver directly controls the Unicam peripheral - there is no ++ * involvement with the VideoCore firmware. Unicam receives CSI-2 or ++ * CCP2 data and writes it into SDRAM. The only potential processing options are ++ * to repack Bayer data into an alternate format, and applying windowing. ++ * The repacking does not shift the data, so could repack V4L2_PIX_FMT_Sxxxx10P ++ * to V4L2_PIX_FMT_Sxxxx10, or V4L2_PIX_FMT_Sxxxx12P to V4L2_PIX_FMT_Sxxxx12, ++ * but not generically up to V4L2_PIX_FMT_Sxxxx16. ++ * Adding support for repacking and windowing may be added later. ++ * ++ * It should be possible to connect this driver to any sensor with a ++ * suitable output interface and V4L2 subdevice driver. ++ * ++ * bcm2835-camera uses the VideoCore firmware to control the sensor, ++ * Unicam, ISP, and all tuner control loops. Fully processed frames are ++ * delivered to the driver by the firmware. It only has sensor drivers ++ * for Omnivision OV5647, and Sony IMX219 sensors. ++ * ++ * The two drivers are mutually exclusive for the same Unicam instance. ++ * The VideoCore firmware checks the device tree configuration during boot. ++ * If it finds device tree nodes called csi0 or csi1 it will block the ++ * firmware from accessing the peripheral, and bcm2835-camera will ++ * not be able to stream data. ++ * ++ * ++ * This program is free software; you may redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS ++ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ++ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN ++ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE ++ * SOFTWARE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vc4-regs-unicam.h" ++ ++#define UNICAM_MODULE_NAME "unicam" ++#define UNICAM_VERSION "0.1.0" ++ ++static int debug; ++module_param(debug, int, 0644); ++MODULE_PARM_DESC(debug, "Debug level 0-3"); ++ ++#define unicam_dbg(level, dev, fmt, arg...) \ ++ v4l2_dbg(level, debug, &(dev)->v4l2_dev, fmt, ##arg) ++#define unicam_info(dev, fmt, arg...) \ ++ v4l2_info(&(dev)->v4l2_dev, fmt, ##arg) ++#define unicam_err(dev, fmt, arg...) \ ++ v4l2_err(&(dev)->v4l2_dev, fmt, ##arg) ++ ++/* ++ * Stride is a 16 bit register, but also has to be a multiple of 16. ++ */ ++#define BPL_ALIGNMENT 16 ++#define MAX_BYTESPERLINE ((1 << 16) - BPL_ALIGNMENT) ++/* ++ * Max width is therefore determined by the max stride divided by ++ * the number of bits per pixel. Take 32bpp as a ++ * worst case. ++ * No imposed limit on the height, so adopt a square image for want ++ * of anything better. ++ */ ++#define MAX_WIDTH (MAX_BYTESPERLINE / 4) ++#define MAX_HEIGHT MAX_WIDTH ++/* Define a nominal minimum image size */ ++#define MIN_WIDTH 16 ++#define MIN_HEIGHT 16 ++/* ++ * Whilst Unicam doesn't require any additional padding on the image ++ * height, various other parts of the BCM283x frameworks require a multiple ++ * of 16. ++ * Seeing as image buffers are significantly larger than this extra ++ * padding, add it in order to simplify integration. ++ */ ++#define HEIGHT_ALIGNMENT 16 ++ ++/* ++ * struct unicam_fmt - Unicam media bus format information ++ * @pixelformat: V4L2 pixel format FCC identifier. ++ * @code: V4L2 media bus format code. ++ * @depth: Bits per pixel (when stored in memory). ++ * @csi_dt: CSI data type. ++ */ ++struct unicam_fmt { ++ u32 fourcc; ++ u32 code; ++ u8 depth; ++ u8 csi_dt; ++}; ++ ++static const struct unicam_fmt formats[] = { ++ /* YUV Formats */ ++ { ++ .fourcc = V4L2_PIX_FMT_YUYV, ++ .code = MEDIA_BUS_FMT_YUYV8_2X8, ++ .depth = 16, ++ .csi_dt = 0x1e, ++ }, { ++ .fourcc = V4L2_PIX_FMT_UYVY, ++ .code = MEDIA_BUS_FMT_UYVY8_2X8, ++ .depth = 16, ++ .csi_dt = 0x1e, ++ }, { ++ .fourcc = V4L2_PIX_FMT_YVYU, ++ .code = MEDIA_BUS_FMT_YVYU8_2X8, ++ .depth = 16, ++ .csi_dt = 0x1e, ++ }, { ++ .fourcc = V4L2_PIX_FMT_VYUY, ++ .code = MEDIA_BUS_FMT_VYUY8_2X8, ++ .depth = 16, ++ .csi_dt = 0x1e, ++ }, { ++ .fourcc = V4L2_PIX_FMT_YUYV, ++ .code = MEDIA_BUS_FMT_YUYV8_1X16, ++ .depth = 16, ++ .csi_dt = 0x1e, ++ }, { ++ .fourcc = V4L2_PIX_FMT_UYVY, ++ .code = MEDIA_BUS_FMT_UYVY8_1X16, ++ .depth = 16, ++ .csi_dt = 0x1e, ++ }, { ++ .fourcc = V4L2_PIX_FMT_YVYU, ++ .code = MEDIA_BUS_FMT_YVYU8_1X16, ++ .depth = 16, ++ .csi_dt = 0x1e, ++ }, { ++ .fourcc = V4L2_PIX_FMT_VYUY, ++ .code = MEDIA_BUS_FMT_VYUY8_1X16, ++ .depth = 16, ++ .csi_dt = 0x1e, ++ }, { ++ /* RGB Formats */ ++ .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ ++ .code = MEDIA_BUS_FMT_RGB565_2X8_LE, ++ .depth = 16, ++ .csi_dt = 0x22, ++ }, { ++ .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ ++ .code = MEDIA_BUS_FMT_RGB565_2X8_BE, ++ .depth = 16, ++ .csi_dt = 0x22 ++ }, { ++ .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */ ++ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, ++ .depth = 16, ++ .csi_dt = 0x21, ++ }, { ++ .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */ ++ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE, ++ .depth = 16, ++ .csi_dt = 0x21, ++ }, { ++ .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */ ++ .code = MEDIA_BUS_FMT_RGB888_1X24, ++ .depth = 24, ++ .csi_dt = 0x24, ++ }, { ++ .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */ ++ .code = MEDIA_BUS_FMT_BGR888_1X24, ++ .depth = 24, ++ .csi_dt = 0x24, ++ }, { ++ .fourcc = V4L2_PIX_FMT_RGB32, /* argb */ ++ .code = MEDIA_BUS_FMT_ARGB8888_1X32, ++ .depth = 32, ++ .csi_dt = 0x0, ++ }, { ++ /* Bayer Formats */ ++ .fourcc = V4L2_PIX_FMT_SBGGR8, ++ .code = MEDIA_BUS_FMT_SBGGR8_1X8, ++ .depth = 8, ++ .csi_dt = 0x2a, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGBRG8, ++ .code = MEDIA_BUS_FMT_SGBRG8_1X8, ++ .depth = 8, ++ .csi_dt = 0x2a, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGRBG8, ++ .code = MEDIA_BUS_FMT_SGRBG8_1X8, ++ .depth = 8, ++ .csi_dt = 0x2a, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SRGGB8, ++ .code = MEDIA_BUS_FMT_SRGGB8_1X8, ++ .depth = 8, ++ .csi_dt = 0x2a, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SBGGR10P, ++ .code = MEDIA_BUS_FMT_SBGGR10_1X10, ++ .depth = 10, ++ .csi_dt = 0x2b, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGBRG10P, ++ .code = MEDIA_BUS_FMT_SGBRG10_1X10, ++ .depth = 10, ++ .csi_dt = 0x2b, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGRBG10P, ++ .code = MEDIA_BUS_FMT_SGRBG10_1X10, ++ .depth = 10, ++ .csi_dt = 0x2b, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SRGGB10P, ++ .code = MEDIA_BUS_FMT_SRGGB10_1X10, ++ .depth = 10, ++ .csi_dt = 0x2b, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SBGGR12P, ++ .code = MEDIA_BUS_FMT_SBGGR12_1X12, ++ .depth = 12, ++ .csi_dt = 0x2c, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGBRG12P, ++ .code = MEDIA_BUS_FMT_SGBRG12_1X12, ++ .depth = 12, ++ .csi_dt = 0x2c, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGRBG12P, ++ .code = MEDIA_BUS_FMT_SGRBG12_1X12, ++ .depth = 12, ++ .csi_dt = 0x2c, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SRGGB12P, ++ .code = MEDIA_BUS_FMT_SRGGB12_1X12, ++ .depth = 12, ++ .csi_dt = 0x2c, ++ }, ++ /* ++ * 14 and 16 bit Bayer formats could be supported, but there are no V4L2 ++ * defines for 14bit packed Bayer, and no CSI2 data_type for raw 16. ++ */ ++}; ++ ++struct unicam_dmaqueue { ++ struct list_head active; ++}; ++ ++struct unicam_buffer { ++ struct vb2_v4l2_buffer vb; ++ struct list_head list; ++}; ++ ++struct unicam_cfg { ++ /* peripheral base address */ ++ void __iomem *base; ++ /* clock gating base address */ ++ void __iomem *clk_gate_base; ++}; ++ ++#define MAX_POSSIBLE_PIX_FMTS (ARRAY_SIZE(formats)) ++ ++struct unicam_device { ++ /* V4l2 specific parameters */ ++ /* Identifies video device for this channel */ ++ struct video_device video_dev; ++ struct v4l2_ctrl_handler ctrl_handler; ++ ++ struct v4l2_fwnode_endpoint endpoint; ++ ++ struct v4l2_async_subdev asd; ++ ++ /* unicam cfg */ ++ struct unicam_cfg cfg; ++ /* clock handle */ ++ struct clk *clock; ++ /* V4l2 device */ ++ struct v4l2_device v4l2_dev; ++ /* parent device */ ++ struct platform_device *pdev; ++ /* subdevice async Notifier */ ++ struct v4l2_async_notifier notifier; ++ unsigned int sequence; ++ ++ /* ptr to sub device */ ++ struct v4l2_subdev *sensor; ++ /* Pad config for the sensor */ ++ struct v4l2_subdev_pad_config *sensor_config; ++ /* current input at the sub device */ ++ int current_input; ++ ++ /* Pointer pointing to current v4l2_buffer */ ++ struct unicam_buffer *cur_frm; ++ /* Pointer pointing to next v4l2_buffer */ ++ struct unicam_buffer *next_frm; ++ ++ /* video capture */ ++ const struct unicam_fmt *fmt; ++ /* Used to store current pixel format */ ++ struct v4l2_format v_fmt; ++ /* Used to store current mbus frame format */ ++ struct v4l2_mbus_framefmt m_fmt; ++ ++ struct unicam_fmt active_fmts[MAX_POSSIBLE_PIX_FMTS]; ++ int num_active_fmt; ++ unsigned int virtual_channel; ++ enum v4l2_mbus_type bus_type; ++ /* ++ * Stores bus.mipi_csi2.flags for CSI2 sensors, or ++ * bus.mipi_csi1.strobe for CCP2. ++ */ ++ unsigned int bus_flags; ++ unsigned int max_data_lanes; ++ unsigned int active_data_lanes; ++ ++ struct v4l2_rect crop; ++ ++ /* Currently selected input on subdev */ ++ int input; ++ ++ /* Buffer queue used in video-buf */ ++ struct vb2_queue buffer_queue; ++ /* Queue of filled frames */ ++ struct unicam_dmaqueue dma_queue; ++ /* IRQ lock for DMA queue */ ++ spinlock_t dma_queue_lock; ++ /* lock used to access this structure */ ++ struct mutex lock; ++ /* Flag to denote that we are processing buffers */ ++ int streaming; ++}; ++ ++/* Hardware access */ ++#define clk_write(dev, val) writel((val) | 0x5a000000, (dev)->clk_gate_base) ++#define clk_read(dev) readl((dev)->clk_gate_base) ++ ++#define reg_read(dev, offset) readl((dev)->base + (offset)) ++#define reg_write(dev, offset, val) writel(val, (dev)->base + (offset)) ++ ++#define reg_read_field(dev, offset, mask) get_field(reg_read((dev), (offset), \ ++ mask)) ++ ++static inline int get_field(u32 value, u32 mask) ++{ ++ return (value & mask) >> __ffs(mask); ++} ++ ++static inline void set_field(u32 *valp, u32 field, u32 mask) ++{ ++ u32 val = *valp; ++ ++ val &= ~mask; ++ val |= (field << __ffs(mask)) & mask; ++ *valp = val; ++} ++ ++static inline void reg_write_field(struct unicam_cfg *dev, u32 offset, ++ u32 field, u32 mask) ++{ ++ u32 val = reg_read((dev), (offset)); ++ ++ set_field(&val, field, mask); ++ reg_write((dev), (offset), val); ++} ++ ++/* Power management functions */ ++static inline int unicam_runtime_get(struct unicam_device *dev) ++{ ++ int r; ++ ++ r = pm_runtime_get_sync(&dev->pdev->dev); ++ ++ return r; ++} ++ ++static inline void unicam_runtime_put(struct unicam_device *dev) ++{ ++ pm_runtime_put_sync(&dev->pdev->dev); ++} ++ ++/* Format setup functions */ ++static int find_mbus_depth_by_code(u32 code) ++{ ++ const struct unicam_fmt *fmt; ++ unsigned int k; ++ ++ for (k = 0; k < ARRAY_SIZE(formats); k++) { ++ fmt = &formats[k]; ++ if (fmt->code == code) ++ return fmt->depth; ++ } ++ ++ return 0; ++} ++ ++static const struct unicam_fmt *find_format_by_code(struct unicam_device *dev, ++ u32 code) ++{ ++ const struct unicam_fmt *fmt; ++ unsigned int k; ++ ++ for (k = 0; k < dev->num_active_fmt; k++) { ++ fmt = &dev->active_fmts[k]; ++ if (fmt->code == code) ++ return fmt; ++ } ++ ++ return NULL; ++} ++ ++static const struct unicam_fmt *find_format_by_pix(struct unicam_device *dev, ++ u32 pixelformat) ++{ ++ const struct unicam_fmt *fmt; ++ unsigned int k; ++ ++ for (k = 0; k < dev->num_active_fmt; k++) { ++ fmt = &dev->active_fmts[k]; ++ if (fmt->fourcc == pixelformat) ++ return fmt; ++ } ++ ++ return NULL; ++} ++ ++static void dump_active_formats(struct unicam_device *dev) ++{ ++ int i; ++ ++ for (i = 0; i < dev->num_active_fmt; i++) { ++ unicam_dbg(3, dev, "active_fmt[%d] (%p) is code %04x, fourcc " V4L2_FOURCC_CONV ", depth %d\n", ++ i, &dev->active_fmts[i], dev->active_fmts[i].code, ++ V4L2_FOURCC_CONV_ARGS(dev->active_fmts[i].fourcc), ++ dev->active_fmts[i].depth); ++ } ++} ++ ++static inline unsigned int bytes_per_line(u32 width, ++ const struct unicam_fmt *fmt) ++{ ++ return ALIGN((width * fmt->depth) >> 3, BPL_ALIGNMENT); ++} ++ ++static int __subdev_get_format(struct unicam_device *dev, ++ struct v4l2_mbus_framefmt *fmt) ++{ ++ struct v4l2_subdev_format sd_fmt = {0}; ++ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format; ++ int ret; ++ ++ sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; ++ sd_fmt.pad = 0; ++ ++ ret = v4l2_subdev_call(dev->sensor, pad, get_fmt, dev->sensor_config, ++ &sd_fmt); ++ if (ret < 0) ++ return ret; ++ ++ *fmt = *mbus_fmt; ++ ++ unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__, ++ fmt->width, fmt->height, fmt->code); ++ ++ return 0; ++} ++ ++static int __subdev_set_format(struct unicam_device *dev, ++ struct v4l2_mbus_framefmt *fmt) ++{ ++ struct v4l2_subdev_format sd_fmt = { ++ .which = V4L2_SUBDEV_FORMAT_ACTIVE, ++ }; ++ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format; ++ int ret; ++ ++ *mbus_fmt = *fmt; ++ ++ ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config, ++ &sd_fmt); ++ if (ret < 0) ++ return ret; ++ ++ unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__, ++ fmt->width, fmt->height, fmt->code); ++ ++ return 0; ++} ++ ++static int unicam_calc_format_size_bpl(struct unicam_device *dev, ++ const struct unicam_fmt *fmt, ++ struct v4l2_format *f) ++{ ++ unsigned int min_bytesperline; ++ ++ v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, MAX_WIDTH, 2, ++ &f->fmt.pix.height, MIN_HEIGHT, MAX_HEIGHT, 0, ++ 0); ++ ++ min_bytesperline = bytes_per_line(f->fmt.pix.width, fmt); ++ ++ if (f->fmt.pix.bytesperline > min_bytesperline && ++ f->fmt.pix.bytesperline <= MAX_BYTESPERLINE) ++ f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline, ++ BPL_ALIGNMENT); ++ else ++ f->fmt.pix.bytesperline = min_bytesperline; ++ ++ /* Align height up for compatibility with other hardware blocks */ ++ f->fmt.pix.sizeimage = ALIGN(f->fmt.pix.height, HEIGHT_ALIGNMENT) * ++ f->fmt.pix.bytesperline; ++ ++ unicam_dbg(3, dev, "%s: fourcc: " V4L2_FOURCC_CONV " size: %dx%d bpl:%d img_size:%d\n", ++ __func__, ++ V4L2_FOURCC_CONV_ARGS(f->fmt.pix.pixelformat), ++ f->fmt.pix.width, f->fmt.pix.height, ++ f->fmt.pix.bytesperline, f->fmt.pix.sizeimage); ++ ++ return 0; ++} ++ ++static int unicam_reset_format(struct unicam_device *dev) ++{ ++ struct v4l2_mbus_framefmt mbus_fmt; ++ int ret; ++ ++ ret = __subdev_get_format(dev, &mbus_fmt); ++ if (ret) { ++ unicam_err(dev, "Failed to get_format - ret %d\n", ret); ++ return ret; ++ } ++ ++ if (mbus_fmt.code != dev->fmt->code) { ++ unicam_err(dev, "code mismatch - fmt->code %08x, mbus_fmt.code %08x\n", ++ dev->fmt->code, mbus_fmt.code); ++ return ret; ++ } ++ ++ v4l2_fill_pix_format(&dev->v_fmt.fmt.pix, &mbus_fmt); ++ dev->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ ++ unicam_calc_format_size_bpl(dev, dev->fmt, &dev->v_fmt); ++ ++ dev->m_fmt = mbus_fmt; ++ ++ return 0; ++} ++ ++static void unicam_wr_dma_addr(struct unicam_device *dev, unsigned int dmaaddr) ++{ ++ unicam_dbg(1, dev, "wr_dma_addr %08x-%08x\n", ++ dmaaddr, dmaaddr + dev->v_fmt.fmt.pix.sizeimage); ++ reg_write(&dev->cfg, UNICAM_IBSA0, dmaaddr); ++ reg_write(&dev->cfg, UNICAM_IBEA0, ++ dmaaddr + dev->v_fmt.fmt.pix.sizeimage); ++} ++ ++static inline void unicam_schedule_next_buffer(struct unicam_device *dev) ++{ ++ struct unicam_dmaqueue *dma_q = &dev->dma_queue; ++ struct unicam_buffer *buf; ++ dma_addr_t addr; ++ ++ buf = list_entry(dma_q->active.next, struct unicam_buffer, list); ++ dev->next_frm = buf; ++ list_del(&buf->list); ++ ++ addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); ++ unicam_wr_dma_addr(dev, addr); ++} ++ ++static inline void unicam_process_buffer_complete(struct unicam_device *dev) ++{ ++ dev->cur_frm->vb.field = dev->m_fmt.field; ++ dev->cur_frm->vb.sequence = dev->sequence++; ++ ++ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE); ++ dev->cur_frm = dev->next_frm; ++} ++ ++/* ++ * unicam_isr : ISR handler for unicam capture ++ * @irq: irq number ++ * @dev_id: dev_id ptr ++ * ++ * It changes status of the captured buffer, takes next buffer from the queue ++ * and sets its address in unicam registers ++ */ ++static irqreturn_t unicam_isr(int irq, void *dev) ++{ ++ struct unicam_device *unicam = (struct unicam_device *)dev; ++ struct unicam_cfg *cfg = &unicam->cfg; ++ struct unicam_dmaqueue *dma_q = &unicam->dma_queue; ++ int ista, sta; ++ ++ /* ++ * Don't service interrupts if not streaming. ++ * Avoids issues if the VPU should enable the ++ * peripheral without the kernel knowing (that ++ * shouldn't happen, but causes issues if it does). ++ */ ++ if (!unicam->streaming) ++ return IRQ_HANDLED; ++ ++ sta = reg_read(cfg, UNICAM_STA); ++ /* Write value back to clear the interrupts */ ++ reg_write(cfg, UNICAM_STA, sta); ++ ++ ista = reg_read(cfg, UNICAM_ISTA); ++ /* Write value back to clear the interrupts */ ++ reg_write(cfg, UNICAM_ISTA, ista); ++ ++ if (!(sta && (UNICAM_IS | UNICAM_PI0))) ++ return IRQ_HANDLED; ++ ++ if (ista & UNICAM_FSI) { ++ /* ++ * Timestamp is to be when the first data byte was captured, ++ * aka frame start. ++ */ ++ if (unicam->cur_frm) ++ unicam->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns(); ++ } ++ if (ista & UNICAM_FEI || sta & UNICAM_PI0) { ++ /* ++ * Ensure we have swapped buffers already as we can't ++ * stop the peripheral. Overwrite the frame we've just ++ * captured instead. ++ */ ++ if (unicam->cur_frm && unicam->cur_frm != unicam->next_frm) ++ unicam_process_buffer_complete(unicam); ++ } ++ ++ if (ista & (UNICAM_FSI | UNICAM_LCI)) { ++ spin_lock(&unicam->dma_queue_lock); ++ if (!list_empty(&dma_q->active) && ++ unicam->cur_frm == unicam->next_frm) ++ unicam_schedule_next_buffer(unicam); ++ spin_unlock(&unicam->dma_queue_lock); ++ } ++ ++ if (reg_read(&unicam->cfg, UNICAM_ICTL) & UNICAM_FCM) { ++ /* Switch out of trigger mode if selected */ ++ reg_write_field(&unicam->cfg, UNICAM_ICTL, 1, UNICAM_TFC); ++ reg_write_field(&unicam->cfg, UNICAM_ICTL, 0, UNICAM_FCM); ++ } ++ return IRQ_HANDLED; ++} ++ ++static int unicam_querycap(struct file *file, void *priv, ++ struct v4l2_capability *cap) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ strlcpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver)); ++ strlcpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card)); ++ ++ snprintf(cap->bus_info, sizeof(cap->bus_info), ++ "platform:%s", dev->v4l2_dev.name); ++ ++ return 0; ++} ++ ++static int unicam_enum_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_fmtdesc *f) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ const struct unicam_fmt *fmt = NULL; ++ ++ if (f->index >= dev->num_active_fmt) ++ return -EINVAL; ++ ++ fmt = &dev->active_fmts[f->index]; ++ ++ f->pixelformat = fmt->fourcc; ++ ++ return 0; ++} ++ ++static int unicam_g_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ *f = dev->v_fmt; ++ ++ return 0; ++} ++ ++static int unicam_try_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ const struct unicam_fmt *fmt; ++ struct v4l2_subdev_format sd_fmt = { ++ .which = V4L2_SUBDEV_FORMAT_TRY, ++ }; ++ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format; ++ int ret; ++ ++ fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat); ++ if (!fmt) { ++ unicam_dbg(3, dev, "Fourcc format (0x%08x) not found. Use default of %08X\n", ++ f->fmt.pix.pixelformat, dev->active_fmts[0].fourcc); ++ ++ /* Just get the first one enumerated */ ++ fmt = &dev->active_fmts[0]; ++ f->fmt.pix.pixelformat = fmt->fourcc; ++ } ++ ++ v4l2_fill_mbus_format(mbus_fmt, &f->fmt.pix, fmt->code); ++ /* ++ * No support for receiving interlaced video, so never ++ * request it from the sensor subdev. ++ */ ++ mbus_fmt->field = V4L2_FIELD_NONE; ++ ++ ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config, ++ &sd_fmt); ++ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) ++ return ret; ++ ++ if (mbus_fmt->field != V4L2_FIELD_NONE) ++ unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n"); ++ ++ v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format); ++ /* ++ * Use current colorspace for now, it will get ++ * updated properly during s_fmt ++ */ ++ f->fmt.pix.colorspace = dev->v_fmt.fmt.pix.colorspace; ++ return unicam_calc_format_size_bpl(dev, fmt, f); ++} ++ ++static int unicam_s_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ struct vb2_queue *q = &dev->buffer_queue; ++ const struct unicam_fmt *fmt; ++ struct v4l2_mbus_framefmt mbus_fmt = {0}; ++ int ret; ++ ++ if (vb2_is_busy(q)) ++ return -EBUSY; ++ ++ ret = unicam_try_fmt_vid_cap(file, priv, f); ++ if (ret < 0) ++ return ret; ++ ++ fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat); ++ if (!fmt) { ++ /* Unknown pixel format - adopt a default */ ++ fmt = &dev->active_fmts[0]; ++ f->fmt.pix.pixelformat = fmt->fourcc; ++ return -EINVAL; ++ } ++ ++ v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code); ++ ++ ret = __subdev_set_format(dev, &mbus_fmt); ++ if (ret) { ++ unicam_dbg(3, dev, "%s __subdev_set_format failed %d\n", ++ __func__, ret); ++ return ret; ++ } ++ ++ /* Just double check nothing has gone wrong */ ++ if (mbus_fmt.code != fmt->code) { ++ unicam_dbg(3, dev, ++ "%s subdev changed format on us, this should not happen\n", ++ __func__); ++ return -EINVAL; ++ } ++ ++ dev->fmt = fmt; ++ dev->v_fmt.fmt.pix.pixelformat = f->fmt.pix.pixelformat; ++ dev->v_fmt.fmt.pix.bytesperline = f->fmt.pix.bytesperline; ++ unicam_reset_format(dev); ++ ++ unicam_dbg(3, dev, "%s %dx%d, mbus_fmt %08X, V4L2 pix " V4L2_FOURCC_CONV ".\n", ++ __func__, dev->v_fmt.fmt.pix.width, ++ dev->v_fmt.fmt.pix.height, mbus_fmt.code, ++ V4L2_FOURCC_CONV_ARGS(dev->v_fmt.fmt.pix.pixelformat)); ++ ++ *f = dev->v_fmt; ++ ++ return 0; ++} ++ ++static int unicam_queue_setup(struct vb2_queue *vq, ++ unsigned int *nbuffers, ++ unsigned int *nplanes, ++ unsigned int sizes[], ++ struct device *alloc_devs[]) ++{ ++ struct unicam_device *dev = vb2_get_drv_priv(vq); ++ unsigned int size = dev->v_fmt.fmt.pix.sizeimage; ++ ++ if (vq->num_buffers + *nbuffers < 3) ++ *nbuffers = 3 - vq->num_buffers; ++ ++ if (*nplanes) { ++ if (sizes[0] < size) { ++ unicam_err(dev, "sizes[0] %i < size %u\n", sizes[0], ++ size); ++ return -EINVAL; ++ } ++ size = sizes[0]; ++ } ++ ++ *nplanes = 1; ++ sizes[0] = size; ++ ++ return 0; ++} ++ ++static int unicam_buffer_prepare(struct vb2_buffer *vb) ++{ ++ struct unicam_device *dev = vb2_get_drv_priv(vb->vb2_queue); ++ struct unicam_buffer *buf = container_of(vb, struct unicam_buffer, ++ vb.vb2_buf); ++ unsigned long size; ++ ++ if (WARN_ON(!dev->fmt)) ++ return -EINVAL; ++ ++ size = dev->v_fmt.fmt.pix.sizeimage; ++ if (vb2_plane_size(vb, 0) < size) { ++ unicam_err(dev, "data will not fit into plane (%lu < %lu)\n", ++ vb2_plane_size(vb, 0), size); ++ return -EINVAL; ++ } ++ ++ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size); ++ return 0; ++} ++ ++static void unicam_buffer_queue(struct vb2_buffer *vb) ++{ ++ struct unicam_device *dev = vb2_get_drv_priv(vb->vb2_queue); ++ struct unicam_buffer *buf = container_of(vb, struct unicam_buffer, ++ vb.vb2_buf); ++ struct unicam_dmaqueue *dma_queue = &dev->dma_queue; ++ unsigned long flags = 0; ++ ++ /* recheck locking */ ++ spin_lock_irqsave(&dev->dma_queue_lock, flags); ++ list_add_tail(&buf->list, &dma_queue->active); ++ spin_unlock_irqrestore(&dev->dma_queue_lock, flags); ++} ++ ++static void unicam_wr_dma_config(struct unicam_device *dev, ++ unsigned int stride) ++{ ++ reg_write(&dev->cfg, UNICAM_IBLS, stride); ++} ++ ++static void unicam_set_packing_config(struct unicam_device *dev) ++{ ++ int mbus_depth = find_mbus_depth_by_code(dev->fmt->code); ++ int v4l2_depth = dev->fmt->depth; ++ int pack, unpack; ++ u32 val; ++ ++ if (mbus_depth == v4l2_depth) { ++ unpack = UNICAM_PUM_NONE; ++ pack = UNICAM_PPM_NONE; ++ } else { ++ switch (mbus_depth) { ++ case 8: ++ unpack = UNICAM_PUM_UNPACK8; ++ break; ++ case 10: ++ unpack = UNICAM_PUM_UNPACK10; ++ break; ++ case 12: ++ unpack = UNICAM_PUM_UNPACK12; ++ break; ++ case 14: ++ unpack = UNICAM_PUM_UNPACK14; ++ break; ++ case 16: ++ unpack = UNICAM_PUM_UNPACK16; ++ break; ++ default: ++ unpack = UNICAM_PUM_NONE; ++ break; ++ } ++ switch (v4l2_depth) { ++ case 8: ++ pack = UNICAM_PPM_PACK8; ++ break; ++ case 10: ++ pack = UNICAM_PPM_PACK10; ++ break; ++ case 12: ++ pack = UNICAM_PPM_PACK12; ++ break; ++ case 14: ++ pack = UNICAM_PPM_PACK14; ++ break; ++ case 16: ++ pack = UNICAM_PPM_PACK16; ++ break; ++ default: ++ pack = UNICAM_PPM_NONE; ++ break; ++ } ++ } ++ ++ val = 0; ++ set_field(&val, 2, UNICAM_DEBL_MASK); ++ set_field(&val, unpack, UNICAM_PUM_MASK); ++ set_field(&val, pack, UNICAM_PPM_MASK); ++ reg_write(&dev->cfg, UNICAM_IPIPE, val); ++} ++ ++static void unicam_cfg_image_id(struct unicam_device *dev) ++{ ++ struct unicam_cfg *cfg = &dev->cfg; ++ ++ if (dev->bus_type == V4L2_MBUS_CSI2) { ++ /* CSI2 mode */ ++ reg_write(cfg, UNICAM_IDI0, ++ (dev->virtual_channel << 6) | dev->fmt->csi_dt); ++ } else { ++ /* CCP2 mode */ ++ reg_write(cfg, UNICAM_IDI0, (0x80 | dev->fmt->csi_dt)); ++ } ++} ++ ++void unicam_start_rx(struct unicam_device *dev, unsigned long addr) ++{ ++ struct unicam_cfg *cfg = &dev->cfg; ++ int line_int_freq = dev->v_fmt.fmt.pix.height >> 2; ++ unsigned int i; ++ u32 val; ++ ++ if (line_int_freq < 128) ++ line_int_freq = 128; ++ ++ /* Enable lane clocks */ ++ val = 1; ++ for (i = 0; i < dev->active_data_lanes; i++) ++ val = val << 2 | 1; ++ clk_write(cfg, val); ++ ++ /* Basic init */ ++ reg_write(cfg, UNICAM_CTRL, UNICAM_MEM); ++ ++ /* Enable analogue control, and leave in reset. */ ++ val = UNICAM_AR; ++ set_field(&val, 7, UNICAM_CTATADJ_MASK); ++ set_field(&val, 7, UNICAM_PTATADJ_MASK); ++ reg_write(cfg, UNICAM_ANA, val); ++ usleep_range(1000, 2000); ++ ++ /* Come out of reset */ ++ reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_AR); ++ ++ /* Peripheral reset */ ++ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR); ++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR); ++ ++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE); ++ ++ /* Enable Rx control. */ ++ val = reg_read(cfg, UNICAM_CTRL); ++ if (dev->bus_type == V4L2_MBUS_CSI2) { ++ set_field(&val, UNICAM_CPM_CSI2, UNICAM_CPM_MASK); ++ set_field(&val, UNICAM_DCM_STROBE, UNICAM_DCM_MASK); ++ } else { ++ set_field(&val, UNICAM_CPM_CCP2, UNICAM_CPM_MASK); ++ set_field(&val, dev->bus_flags, UNICAM_DCM_MASK); ++ } ++ /* Packet framer timeout */ ++ set_field(&val, 0xf, UNICAM_PFT_MASK); ++ set_field(&val, 128, UNICAM_OET_MASK); ++ reg_write(cfg, UNICAM_CTRL, val); ++ ++ reg_write(cfg, UNICAM_IHWIN, 0); ++ reg_write(cfg, UNICAM_IVWIN, 0); ++ ++ /* AXI bus access QoS setup */ ++ val = reg_read(&dev->cfg, UNICAM_PRI); ++ set_field(&val, 0, UNICAM_BL_MASK); ++ set_field(&val, 0, UNICAM_BS_MASK); ++ set_field(&val, 0xe, UNICAM_PP_MASK); ++ set_field(&val, 8, UNICAM_NP_MASK); ++ set_field(&val, 2, UNICAM_PT_MASK); ++ set_field(&val, 1, UNICAM_PE); ++ reg_write(cfg, UNICAM_PRI, val); ++ ++ reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_DDL); ++ ++ /* Always start in trigger frame capture mode (UNICAM_FCM set) */ ++ val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM; ++ set_field(&val, line_int_freq, UNICAM_LCIE_MASK); ++ reg_write(cfg, UNICAM_ICTL, val); ++ reg_write(cfg, UNICAM_STA, UNICAM_STA_MASK_ALL); ++ reg_write(cfg, UNICAM_ISTA, UNICAM_ISTA_MASK_ALL); ++ ++ /* tclk_term_en */ ++ reg_write_field(cfg, UNICAM_CLT, 2, UNICAM_CLT1_MASK); ++ /* tclk_settle */ ++ reg_write_field(cfg, UNICAM_CLT, 6, UNICAM_CLT2_MASK); ++ /* td_term_en */ ++ reg_write_field(cfg, UNICAM_DLT, 2, UNICAM_DLT1_MASK); ++ /* ths_settle */ ++ reg_write_field(cfg, UNICAM_DLT, 6, UNICAM_DLT2_MASK); ++ /* trx_enable */ ++ reg_write_field(cfg, UNICAM_DLT, 0, UNICAM_DLT3_MASK); ++ ++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_SOE); ++ ++ /* Packet compare setup - required to avoid missing frame ends */ ++ val = 0; ++ set_field(&val, 1, UNICAM_PCE); ++ set_field(&val, 1, UNICAM_GI); ++ set_field(&val, 1, UNICAM_CPH); ++ set_field(&val, 0, UNICAM_PCVC_MASK); ++ set_field(&val, 1, UNICAM_PCDT_MASK); ++ reg_write(cfg, UNICAM_CMP0, val); ++ ++ /* Enable clock lane and set up terminations */ ++ val = 0; ++ if (dev->bus_type == V4L2_MBUS_CSI2) { ++ /* CSI2 */ ++ set_field(&val, 1, UNICAM_CLE); ++ set_field(&val, 1, UNICAM_CLLPE); ++ if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { ++ set_field(&val, 1, UNICAM_CLTRE); ++ set_field(&val, 1, UNICAM_CLHSE); ++ } ++ } else { ++ /* CCP2 */ ++ set_field(&val, 1, UNICAM_CLE); ++ set_field(&val, 1, UNICAM_CLHSE); ++ set_field(&val, 1, UNICAM_CLTRE); ++ } ++ reg_write(cfg, UNICAM_CLK, val); ++ ++ /* ++ * Enable required data lanes with appropriate terminations. ++ * The same value needs to be written to UNICAM_DATn registers for ++ * the active lanes, and 0 for inactive ones. ++ */ ++ val = 0; ++ if (dev->bus_type == V4L2_MBUS_CSI2) { ++ /* CSI2 */ ++ set_field(&val, 1, UNICAM_DLE); ++ set_field(&val, 1, UNICAM_DLLPE); ++ if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { ++ set_field(&val, 1, UNICAM_DLTRE); ++ set_field(&val, 1, UNICAM_DLHSE); ++ } ++ } else { ++ /* CCP2 */ ++ set_field(&val, 1, UNICAM_DLE); ++ set_field(&val, 1, UNICAM_DLHSE); ++ set_field(&val, 1, UNICAM_DLTRE); ++ } ++ reg_write(cfg, UNICAM_DAT0, val); ++ ++ if (dev->active_data_lanes == 1) ++ val = 0; ++ reg_write(cfg, UNICAM_DAT1, val); ++ ++ if (dev->max_data_lanes > 2) { ++ /* ++ * Registers UNICAM_DAT2 and UNICAM_DAT3 only valid if the ++ * instance supports more than 2 data lanes. ++ */ ++ if (dev->active_data_lanes == 2) ++ val = 0; ++ reg_write(cfg, UNICAM_DAT2, val); ++ ++ if (dev->active_data_lanes == 3) ++ val = 0; ++ reg_write(cfg, UNICAM_DAT3, val); ++ } ++ ++ unicam_wr_dma_config(dev, dev->v_fmt.fmt.pix.bytesperline); ++ unicam_wr_dma_addr(dev, addr); ++ unicam_set_packing_config(dev); ++ unicam_cfg_image_id(dev); ++ ++ /* Disabled embedded data */ ++ val = 0; ++ set_field(&val, 0, UNICAM_EDL_MASK); ++ reg_write(cfg, UNICAM_DCS, val); ++ ++ val = reg_read(cfg, UNICAM_MISC); ++ set_field(&val, 1, UNICAM_FL0); ++ set_field(&val, 1, UNICAM_FL1); ++ reg_write(cfg, UNICAM_MISC, val); ++ ++ /* Enable peripheral */ ++ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPE); ++ ++ /* Load image pointers */ ++ reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_LIP_MASK); ++ ++ /* ++ * Enable trigger only for the first frame to ++ * sync correctly to the FS from the source. ++ */ ++ reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_TFC); ++} ++ ++static void unicam_disable(struct unicam_device *dev) ++{ ++ struct unicam_cfg *cfg = &dev->cfg; ++ ++ /* Analogue lane control disable */ ++ reg_write_field(cfg, UNICAM_ANA, 1, UNICAM_DDL); ++ ++ /* Stop the output engine */ ++ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_SOE); ++ ++ /* Disable the data lanes. */ ++ reg_write(cfg, UNICAM_DAT0, 0); ++ reg_write(cfg, UNICAM_DAT1, 0); ++ ++ if (dev->max_data_lanes > 2) { ++ reg_write(cfg, UNICAM_DAT2, 0); ++ reg_write(cfg, UNICAM_DAT3, 0); ++ } ++ ++ /* Peripheral reset */ ++ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR); ++ usleep_range(50, 100); ++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR); ++ ++ /* Disable peripheral */ ++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE); ++ ++ /* Disable all lane clocks */ ++ clk_write(cfg, 0); ++} ++ ++static int unicam_start_streaming(struct vb2_queue *vq, unsigned int count) ++{ ++ struct unicam_device *dev = vb2_get_drv_priv(vq); ++ struct unicam_dmaqueue *dma_q = &dev->dma_queue; ++ struct unicam_buffer *buf, *tmp; ++ unsigned long addr = 0; ++ unsigned long flags; ++ int ret; ++ ++ spin_lock_irqsave(&dev->dma_queue_lock, flags); ++ buf = list_entry(dma_q->active.next, struct unicam_buffer, list); ++ dev->cur_frm = buf; ++ dev->next_frm = buf; ++ list_del(&buf->list); ++ spin_unlock_irqrestore(&dev->dma_queue_lock, flags); ++ ++ addr = vb2_dma_contig_plane_dma_addr(&dev->cur_frm->vb.vb2_buf, 0); ++ dev->sequence = 0; ++ ++ ret = unicam_runtime_get(dev); ++ if (ret < 0) { ++ unicam_dbg(3, dev, "unicam_runtime_get failed\n"); ++ goto err_release_buffers; ++ } ++ ++ dev->active_data_lanes = dev->max_data_lanes; ++ if (dev->bus_type == V4L2_MBUS_CSI2 && ++ v4l2_subdev_has_op(dev->sensor, video, g_mbus_config)) { ++ struct v4l2_mbus_config mbus_config; ++ ++ ret = v4l2_subdev_call(dev->sensor, video, g_mbus_config, ++ &mbus_config); ++ if (ret < 0) { ++ unicam_dbg(3, dev, "g_mbus_config failed\n"); ++ goto err_pm_put; ++ } ++ ++ dev->active_data_lanes = ++ (mbus_config.flags & V4L2_MBUS_CSI2_LANE_MASK) >> ++ __ffs(V4L2_MBUS_CSI2_LANE_MASK); ++ if (!dev->active_data_lanes) ++ dev->active_data_lanes = dev->max_data_lanes; ++ } ++ if (dev->active_data_lanes > dev->max_data_lanes) { ++ unicam_err(dev, "Device has requested %u data lanes, which is >%u configured in DT\n", ++ dev->active_data_lanes, dev->max_data_lanes); ++ ret = -EINVAL; ++ goto err_pm_put; ++ } ++ ++ unicam_dbg(1, dev, "Running with %u data lanes\n", ++ dev->active_data_lanes); ++ ++ ret = clk_set_rate(dev->clock, 100 * 1000 * 1000); ++ if (ret) { ++ unicam_err(dev, "failed to set up clock\n"); ++ goto err_pm_put; ++ } ++ ++ ret = clk_prepare_enable(dev->clock); ++ if (ret) { ++ unicam_err(dev, "Failed to enable CSI clock: %d\n", ret); ++ goto err_pm_put; ++ } ++ ret = v4l2_subdev_call(dev->sensor, core, s_power, 1); ++ if (ret < 0 && ret != -ENOIOCTLCMD) { ++ unicam_err(dev, "power on failed in subdev\n"); ++ goto err_clock_unprepare; ++ } ++ dev->streaming = 1; ++ ++ unicam_start_rx(dev, addr); ++ ++ ret = v4l2_subdev_call(dev->sensor, video, s_stream, 1); ++ if (ret < 0) { ++ unicam_err(dev, "stream on failed in subdev\n"); ++ goto err_disable_unicam; ++ } ++ ++ return 0; ++ ++err_disable_unicam: ++ unicam_disable(dev); ++ v4l2_subdev_call(dev->sensor, core, s_power, 0); ++err_clock_unprepare: ++ clk_disable_unprepare(dev->clock); ++err_pm_put: ++ unicam_runtime_put(dev); ++err_release_buffers: ++ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) { ++ list_del(&buf->list); ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); ++ } ++ if (dev->cur_frm != dev->next_frm) ++ vb2_buffer_done(&dev->next_frm->vb.vb2_buf, ++ VB2_BUF_STATE_QUEUED); ++ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_QUEUED); ++ dev->next_frm = NULL; ++ dev->cur_frm = NULL; ++ ++ return ret; ++} ++ ++static void unicam_stop_streaming(struct vb2_queue *vq) ++{ ++ struct unicam_device *dev = vb2_get_drv_priv(vq); ++ struct unicam_dmaqueue *dma_q = &dev->dma_queue; ++ struct unicam_buffer *buf, *tmp; ++ unsigned long flags; ++ ++ if (v4l2_subdev_call(dev->sensor, video, s_stream, 0) < 0) ++ unicam_err(dev, "stream off failed in subdev\n"); ++ ++ unicam_disable(dev); ++ ++ /* Release all active buffers */ ++ spin_lock_irqsave(&dev->dma_queue_lock, flags); ++ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) { ++ list_del(&buf->list); ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ } ++ ++ if (dev->cur_frm == dev->next_frm) { ++ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ } else { ++ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ vb2_buffer_done(&dev->next_frm->vb.vb2_buf, ++ VB2_BUF_STATE_ERROR); ++ } ++ dev->cur_frm = NULL; ++ dev->next_frm = NULL; ++ spin_unlock_irqrestore(&dev->dma_queue_lock, flags); ++ ++ if (v4l2_subdev_has_op(dev->sensor, core, s_power)) { ++ if (v4l2_subdev_call(dev->sensor, core, s_power, 0) < 0) ++ unicam_err(dev, "power off failed in subdev\n"); ++ } ++ ++ clk_disable_unprepare(dev->clock); ++ unicam_runtime_put(dev); ++} ++ ++static int unicam_enum_input(struct file *file, void *priv, ++ struct v4l2_input *inp) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ if (inp->index != 0) ++ return -EINVAL; ++ ++ inp->type = V4L2_INPUT_TYPE_CAMERA; ++ if (v4l2_subdev_has_op(dev->sensor, video, s_dv_timings)) { ++ inp->capabilities = V4L2_IN_CAP_DV_TIMINGS; ++ inp->std = 0; ++ } else if (v4l2_subdev_has_op(dev->sensor, video, s_std)) { ++ inp->capabilities = V4L2_IN_CAP_STD; ++ if (v4l2_subdev_call(dev->sensor, video, g_tvnorms, &inp->std) ++ < 0) ++ inp->std = V4L2_STD_ALL; ++ } else { ++ inp->capabilities = 0; ++ inp->std = 0; ++ } ++ sprintf(inp->name, "Camera 0"); ++ return 0; ++} ++ ++static int unicam_g_input(struct file *file, void *priv, unsigned int *i) ++{ ++ *i = 0; ++ ++ return 0; ++} ++ ++static int unicam_s_input(struct file *file, void *priv, unsigned int i) ++{ ++ /* ++ * FIXME: Ideally we would like to be able to query the source ++ * subdevice for information over the input connectors it supports, ++ * and map that through in to a call to video_ops->s_routing. ++ * There is no infrastructure support for defining that within ++ * devicetree at present. Until that is implemented we can't ++ * map a user physical connector number to s_routing input number. ++ */ ++ if (i > 0) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static int unicam_querystd(struct file *file, void *priv, ++ v4l2_std_id *std) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_subdev_call(dev->sensor, video, querystd, std); ++} ++ ++static int unicam_g_std(struct file *file, void *priv, v4l2_std_id *std) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_subdev_call(dev->sensor, video, g_std, std); ++} ++ ++static int unicam_s_std(struct file *file, void *priv, v4l2_std_id std) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ int ret; ++ v4l2_std_id current_std; ++ ++ ret = v4l2_subdev_call(dev->sensor, video, g_std, ¤t_std); ++ if (ret) ++ return ret; ++ ++ if (std == current_std) ++ return 0; ++ ++ if (vb2_is_busy(&dev->buffer_queue)) ++ return -EBUSY; ++ ++ ret = v4l2_subdev_call(dev->sensor, video, s_std, std); ++ ++ /* Force recomputation of bytesperline */ ++ dev->v_fmt.fmt.pix.bytesperline = 0; ++ ++ unicam_reset_format(dev); ++ ++ return ret; ++} ++ ++static int unicam_s_edid(struct file *file, void *priv, struct v4l2_edid *edid) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_subdev_call(dev->sensor, pad, set_edid, edid); ++} ++ ++static int unicam_g_edid(struct file *file, void *priv, struct v4l2_edid *edid) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_subdev_call(dev->sensor, pad, get_edid, edid); ++} ++ ++static int unicam_g_dv_timings(struct file *file, void *priv, ++ struct v4l2_dv_timings *timings) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_subdev_call(dev->sensor, video, g_dv_timings, timings); ++} ++ ++static int unicam_s_dv_timings(struct file *file, void *priv, ++ struct v4l2_dv_timings *timings) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ struct v4l2_dv_timings current_timings; ++ int ret; ++ ++ ret = v4l2_subdev_call(dev->sensor, video, g_dv_timings, ++ ¤t_timings); ++ ++ if (v4l2_match_dv_timings(timings, ¤t_timings, 0, false)) ++ return 0; ++ ++ if (vb2_is_busy(&dev->buffer_queue)) ++ return -EBUSY; ++ ++ ret = v4l2_subdev_call(dev->sensor, video, s_dv_timings, timings); ++ ++ /* Force recomputation of bytesperline */ ++ dev->v_fmt.fmt.pix.bytesperline = 0; ++ ++ unicam_reset_format(dev); ++ ++ return ret; ++} ++ ++static int unicam_query_dv_timings(struct file *file, void *priv, ++ struct v4l2_dv_timings *timings) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_subdev_call(dev->sensor, video, query_dv_timings, timings); ++} ++ ++static int unicam_enum_dv_timings(struct file *file, void *priv, ++ struct v4l2_enum_dv_timings *timings) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_subdev_call(dev->sensor, pad, enum_dv_timings, timings); ++} ++ ++static int unicam_dv_timings_cap(struct file *file, void *priv, ++ struct v4l2_dv_timings_cap *cap) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_subdev_call(dev->sensor, pad, dv_timings_cap, cap); ++} ++ ++static int unicam_subscribe_event(struct v4l2_fh *fh, ++ const struct v4l2_event_subscription *sub) ++{ ++ switch (sub->type) { ++ case V4L2_EVENT_SOURCE_CHANGE: ++ return v4l2_event_subscribe(fh, sub, 4, NULL); ++ } ++ ++ return v4l2_ctrl_subscribe_event(fh, sub); ++} ++ ++static int unicam_log_status(struct file *file, void *fh) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ struct unicam_cfg *cfg = &dev->cfg; ++ u32 reg; ++ ++ /* status for sub devices */ ++ v4l2_device_call_all(&dev->v4l2_dev, 0, core, log_status); ++ ++ unicam_info(dev, "-----Receiver status-----\n"); ++ unicam_info(dev, "V4L2 width/height: %ux%u\n", ++ dev->v_fmt.fmt.pix.width, dev->v_fmt.fmt.pix.height); ++ unicam_info(dev, "Mediabus format: %08x\n", dev->fmt->code); ++ unicam_info(dev, "V4L2 format: " V4L2_FOURCC_CONV "\n", ++ V4L2_FOURCC_CONV_ARGS(dev->v_fmt.fmt.pix.pixelformat)); ++ reg = reg_read(&dev->cfg, UNICAM_IPIPE); ++ unicam_info(dev, "Unpacking/packing: %u / %u\n", ++ get_field(reg, UNICAM_PUM_MASK), ++ get_field(reg, UNICAM_PPM_MASK)); ++ unicam_info(dev, "----Live data----\n"); ++ unicam_info(dev, "Programmed stride: %4u\n", ++ reg_read(cfg, UNICAM_IBLS)); ++ unicam_info(dev, "Detected resolution: %ux%u\n", ++ reg_read(cfg, UNICAM_IHSTA), ++ reg_read(cfg, UNICAM_IVSTA)); ++ unicam_info(dev, "Write pointer: %08x\n", ++ reg_read(cfg, UNICAM_IBWP)); ++ ++ return 0; ++} ++ ++static void unicam_notify(struct v4l2_subdev *sd, ++ unsigned int notification, void *arg) ++{ ++ struct unicam_device *dev = ++ container_of(sd->v4l2_dev, struct unicam_device, v4l2_dev); ++ ++ switch (notification) { ++ case V4L2_DEVICE_NOTIFY_EVENT: ++ v4l2_event_queue(&dev->video_dev, arg); ++ break; ++ default: ++ break; ++ } ++} ++ ++static const struct vb2_ops unicam_video_qops = { ++ .wait_prepare = vb2_ops_wait_prepare, ++ .wait_finish = vb2_ops_wait_finish, ++ .queue_setup = unicam_queue_setup, ++ .buf_prepare = unicam_buffer_prepare, ++ .buf_queue = unicam_buffer_queue, ++ .start_streaming = unicam_start_streaming, ++ .stop_streaming = unicam_stop_streaming, ++}; ++ ++/* unicam capture driver file operations */ ++static const struct v4l2_file_operations unicam_fops = { ++ .owner = THIS_MODULE, ++ .open = v4l2_fh_open, ++ .release = vb2_fop_release, ++ .read = vb2_fop_read, ++ .poll = vb2_fop_poll, ++ .unlocked_ioctl = video_ioctl2, ++ .mmap = vb2_fop_mmap, ++}; ++ ++/* unicam capture ioctl operations */ ++static const struct v4l2_ioctl_ops unicam_ioctl_ops = { ++ .vidioc_querycap = unicam_querycap, ++ .vidioc_enum_fmt_vid_cap = unicam_enum_fmt_vid_cap, ++ .vidioc_g_fmt_vid_cap = unicam_g_fmt_vid_cap, ++ .vidioc_s_fmt_vid_cap = unicam_s_fmt_vid_cap, ++ .vidioc_try_fmt_vid_cap = unicam_try_fmt_vid_cap, ++ ++ .vidioc_enum_input = unicam_enum_input, ++ .vidioc_g_input = unicam_g_input, ++ .vidioc_s_input = unicam_s_input, ++ ++ .vidioc_querystd = unicam_querystd, ++ .vidioc_s_std = unicam_s_std, ++ .vidioc_g_std = unicam_g_std, ++ ++ .vidioc_g_edid = unicam_g_edid, ++ .vidioc_s_edid = unicam_s_edid, ++ ++ .vidioc_s_dv_timings = unicam_s_dv_timings, ++ .vidioc_g_dv_timings = unicam_g_dv_timings, ++ .vidioc_query_dv_timings = unicam_query_dv_timings, ++ .vidioc_enum_dv_timings = unicam_enum_dv_timings, ++ .vidioc_dv_timings_cap = unicam_dv_timings_cap, ++ ++ .vidioc_reqbufs = vb2_ioctl_reqbufs, ++ .vidioc_create_bufs = vb2_ioctl_create_bufs, ++ .vidioc_prepare_buf = vb2_ioctl_prepare_buf, ++ .vidioc_querybuf = vb2_ioctl_querybuf, ++ .vidioc_qbuf = vb2_ioctl_qbuf, ++ .vidioc_dqbuf = vb2_ioctl_dqbuf, ++ .vidioc_expbuf = vb2_ioctl_expbuf, ++ .vidioc_streamon = vb2_ioctl_streamon, ++ .vidioc_streamoff = vb2_ioctl_streamoff, ++ ++ .vidioc_log_status = unicam_log_status, ++ .vidioc_subscribe_event = unicam_subscribe_event, ++ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, ++}; ++ ++/* ++ * Adds an entry to the active_fmts array ++ * Returns non-zero if attempting to write off the end of the array. ++ */ ++static int unicam_add_active_format(struct unicam_device *unicam, ++ const struct unicam_fmt *fmt) ++{ ++ //Ensure we don't run off the end of the array. ++ if (unicam->num_active_fmt >= MAX_POSSIBLE_PIX_FMTS) ++ return 1; ++ ++ unicam->active_fmts[unicam->num_active_fmt] = *fmt; ++ unicam_dbg(2, unicam, ++ "matched fourcc: " V4L2_FOURCC_CONV ": code: %04x idx: %d\n", ++ V4L2_FOURCC_CONV_ARGS(fmt->fourcc), ++ fmt->code, unicam->num_active_fmt); ++ unicam->num_active_fmt++; ++ ++ return 0; ++} ++ ++static int ++unicam_async_bound(struct v4l2_async_notifier *notifier, ++ struct v4l2_subdev *subdev, ++ struct v4l2_async_subdev *asd) ++{ ++ struct unicam_device *unicam = container_of(notifier->v4l2_dev, ++ struct unicam_device, v4l2_dev); ++ struct v4l2_subdev_mbus_code_enum mbus_code; ++ int ret = 0; ++ int j; ++ ++ if (unicam->sensor) { ++ unicam_info(unicam, "Rejecting subdev %s (Already set!!)", ++ subdev->name); ++ return 0; ++ } ++ ++ unicam->sensor = subdev; ++ unicam_dbg(1, unicam, "Using sensor %s for capture\n", subdev->name); ++ ++ /* Enumerate sub device formats and enable all matching local formats */ ++ unicam->num_active_fmt = 0; ++ unicam_dbg(2, unicam, "Get supported formats...\n"); ++ for (j = 0; ret != -EINVAL && ret != -ENOIOCTLCMD; ++j) { ++ const struct unicam_fmt *fmt = NULL; ++ int k; ++ ++ memset(&mbus_code, 0, sizeof(mbus_code)); ++ mbus_code.index = j; ++ ret = v4l2_subdev_call(subdev, pad, enum_mbus_code, ++ NULL, &mbus_code); ++ if (ret < 0) { ++ unicam_dbg(2, unicam, ++ "subdev->enum_mbus_code idx %d returned %d - continue\n", ++ j, ret); ++ continue; ++ } ++ ++ unicam_dbg(2, unicam, "subdev %s: code: %04x idx: %d\n", ++ subdev->name, mbus_code.code, j); ++ ++ for (k = 0; k < ARRAY_SIZE(formats); k++) { ++ if (mbus_code.code == formats[k].code) { ++ fmt = &formats[k]; ++ break; ++ } ++ } ++ unicam_dbg(2, unicam, "fmt %04x returned as %p, V4L2 FOURCC %04x, csi_dt %02X\n", ++ mbus_code.code, fmt, fmt ? fmt->fourcc : 0, ++ fmt ? fmt->csi_dt : 0); ++ if (fmt) { ++ if (unicam_add_active_format(unicam, fmt)) { ++ unicam_dbg(1, unicam, "Active fmt list truncated\n"); ++ break; ++ } ++ } ++ } ++ unicam_dbg(2, unicam, ++ "Done all formats\n"); ++ dump_active_formats(unicam); ++ ++ return 0; ++} ++ ++static int unicam_probe_complete(struct unicam_device *unicam) ++{ ++ struct video_device *vdev; ++ struct vb2_queue *q; ++ struct v4l2_mbus_framefmt mbus_fmt = {0}; ++ const struct unicam_fmt *fmt; ++ int ret; ++ ++ v4l2_set_subdev_hostdata(unicam->sensor, unicam); ++ ++ unicam->v4l2_dev.notify = unicam_notify; ++ ++ unicam->sensor_config = v4l2_subdev_alloc_pad_config(unicam->sensor); ++ if (!unicam->sensor_config) ++ return -ENOMEM; ++ ++ ret = __subdev_get_format(unicam, &mbus_fmt); ++ if (ret) { ++ unicam_err(unicam, "Failed to get_format - ret %d\n", ret); ++ return ret; ++ } ++ ++ fmt = find_format_by_code(unicam, mbus_fmt.code); ++ if (!fmt) { ++ /* Default image format not valid. Choose first active fmt. */ ++ fmt = &unicam->active_fmts[0]; ++ mbus_fmt.code = fmt->code; ++ ret = __subdev_set_format(unicam, &mbus_fmt); ++ if (ret) ++ return -EINVAL; ++ } ++ if (mbus_fmt.field != V4L2_FIELD_NONE) { ++ /* Interlaced not supported - disable it now. */ ++ mbus_fmt.field = V4L2_FIELD_NONE; ++ ret = __subdev_set_format(unicam, &mbus_fmt); ++ if (ret) ++ return -EINVAL; ++ } ++ ++ unicam->fmt = fmt; ++ unicam->v_fmt.fmt.pix.pixelformat = fmt->fourcc; ++ ++ /* Read current subdev format */ ++ unicam_reset_format(unicam); ++ ++ if (v4l2_subdev_has_op(unicam->sensor, video, s_std)) { ++ v4l2_std_id tvnorms; ++ ++ if (WARN_ON(!v4l2_subdev_has_op(unicam->sensor, video, ++ g_tvnorms))) ++ /* ++ * Subdevice should not advertise s_std but not ++ * g_tvnorms ++ */ ++ return -EINVAL; ++ ++ ret = v4l2_subdev_call(unicam->sensor, video, ++ g_tvnorms, &tvnorms); ++ if (WARN_ON(ret)) ++ return -EINVAL; ++ unicam->video_dev.tvnorms |= tvnorms; ++ } ++ ++ spin_lock_init(&unicam->dma_queue_lock); ++ mutex_init(&unicam->lock); ++ ++ /* Add controls from the subdevice */ ++ ret = v4l2_ctrl_add_handler(&unicam->ctrl_handler, ++ unicam->sensor->ctrl_handler, NULL); ++ if (ret < 0) ++ return ret; ++ ++ q = &unicam->buffer_queue; ++ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ; ++ q->drv_priv = unicam; ++ q->ops = &unicam_video_qops; ++ q->mem_ops = &vb2_dma_contig_memops; ++ q->buf_struct_size = sizeof(struct unicam_buffer); ++ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; ++ q->lock = &unicam->lock; ++ q->min_buffers_needed = 2; ++ q->dev = &unicam->pdev->dev; ++ ++ ret = vb2_queue_init(q); ++ if (ret) { ++ unicam_err(unicam, "vb2_queue_init() failed\n"); ++ return ret; ++ } ++ ++ INIT_LIST_HEAD(&unicam->dma_queue.active); ++ ++ vdev = &unicam->video_dev; ++ strlcpy(vdev->name, UNICAM_MODULE_NAME, sizeof(vdev->name)); ++ vdev->release = video_device_release_empty; ++ vdev->fops = &unicam_fops; ++ vdev->ioctl_ops = &unicam_ioctl_ops; ++ vdev->v4l2_dev = &unicam->v4l2_dev; ++ vdev->vfl_dir = VFL_DIR_RX; ++ vdev->queue = q; ++ vdev->lock = &unicam->lock; ++ vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | ++ V4L2_CAP_READWRITE; ++ ++ /* If the source has no controls then remove our ctrl handler. */ ++ if (list_empty(&unicam->ctrl_handler.ctrls)) ++ unicam->v4l2_dev.ctrl_handler = NULL; ++ ++ video_set_drvdata(vdev, unicam); ++ ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); ++ if (ret) { ++ unicam_err(unicam, "Unable to register video device.\n"); ++ return ret; ++ } ++ ++ if (!v4l2_subdev_has_op(unicam->sensor, video, s_std)) { ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_STD); ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_STD); ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUMSTD); ++ } ++ if (!v4l2_subdev_has_op(unicam->sensor, video, querystd)) ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERYSTD); ++ if (!v4l2_subdev_has_op(unicam->sensor, video, s_dv_timings)) { ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_EDID); ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_EDID); ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_DV_TIMINGS_CAP); ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_DV_TIMINGS); ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_DV_TIMINGS); ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUM_DV_TIMINGS); ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERY_DV_TIMINGS); ++ } ++ ++ ret = v4l2_device_register_subdev_nodes(&unicam->v4l2_dev); ++ if (ret) { ++ unicam_err(unicam, ++ "Unable to register subdev nodes.\n"); ++ video_unregister_device(&unicam->video_dev); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int unicam_async_complete(struct v4l2_async_notifier *notifier) ++{ ++ struct unicam_device *unicam = container_of(notifier->v4l2_dev, ++ struct unicam_device, v4l2_dev); ++ ++ return unicam_probe_complete(unicam); ++} ++ ++static const struct v4l2_async_notifier_operations unicam_async_ops = { ++ .bound = unicam_async_bound, ++ .complete = unicam_async_complete, ++}; ++ ++static int of_unicam_connect_subdevs(struct unicam_device *dev) ++{ ++ struct platform_device *pdev = dev->pdev; ++ struct device_node *parent, *ep_node = NULL, *remote_ep = NULL, ++ *sensor_node = NULL; ++ struct v4l2_fwnode_endpoint *ep; ++ struct v4l2_async_subdev *asd; ++ struct v4l2_async_subdev **subdevs = NULL; ++ unsigned int peripheral_data_lanes; ++ int ret = -EINVAL; ++ unsigned int lane; ++ ++ parent = pdev->dev.of_node; ++ ++ asd = &dev->asd; ++ ep = &dev->endpoint; ++ ++ ep_node = of_graph_get_next_endpoint(parent, NULL); ++ if (!ep_node) { ++ unicam_dbg(3, dev, "can't get next endpoint\n"); ++ goto cleanup_exit; ++ } ++ ++ unicam_dbg(3, dev, "ep_node is %s\n", ep_node->name); ++ ++ v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), ep); ++ ++ for (lane = 0; lane < ep->bus.mipi_csi2.num_data_lanes; lane++) { ++ if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) { ++ unicam_err(dev, "Local endpoint - data lane reordering not supported\n"); ++ goto cleanup_exit; ++ } ++ } ++ ++ peripheral_data_lanes = ep->bus.mipi_csi2.num_data_lanes; ++ ++ sensor_node = of_graph_get_remote_port_parent(ep_node); ++ if (!sensor_node) { ++ unicam_dbg(3, dev, "can't get remote parent\n"); ++ goto cleanup_exit; ++ } ++ unicam_dbg(3, dev, "sensor_node is %s\n", sensor_node->name); ++ asd->match_type = V4L2_ASYNC_MATCH_FWNODE; ++ asd->match.fwnode = of_fwnode_handle(sensor_node); ++ ++ remote_ep = of_graph_get_remote_endpoint(ep_node); ++ if (!remote_ep) { ++ unicam_dbg(3, dev, "can't get remote-endpoint\n"); ++ goto cleanup_exit; ++ } ++ unicam_dbg(3, dev, "remote_ep is %s\n", remote_ep->name); ++ v4l2_fwnode_endpoint_parse(of_fwnode_handle(remote_ep), ep); ++ unicam_dbg(3, dev, "parsed remote_ep to endpoint. nr_of_link_frequencies %u, bus_type %u\n", ++ ep->nr_of_link_frequencies, ep->bus_type); ++ ++ switch (ep->bus_type) { ++ case V4L2_MBUS_CSI2: ++ if (ep->bus.mipi_csi2.num_data_lanes > ++ peripheral_data_lanes) { ++ unicam_err(dev, "Subdevice %s wants too many data lanes (%u > %u)\n", ++ sensor_node->name, ++ ep->bus.mipi_csi2.num_data_lanes, ++ peripheral_data_lanes); ++ goto cleanup_exit; ++ } ++ for (lane = 0; ++ lane < ep->bus.mipi_csi2.num_data_lanes; ++ lane++) { ++ if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) { ++ unicam_err(dev, "Subdevice %s - incompatible data lane config\n", ++ sensor_node->name); ++ goto cleanup_exit; ++ } ++ } ++ dev->max_data_lanes = ep->bus.mipi_csi2.num_data_lanes; ++ dev->bus_flags = ep->bus.mipi_csi2.flags; ++ break; ++ case V4L2_MBUS_CCP2: ++ if (ep->bus.mipi_csi1.clock_lane != 0 || ++ ep->bus.mipi_csi1.data_lane != 1) { ++ unicam_err(dev, "Subdevice %s incompatible lane config\n", ++ sensor_node->name); ++ goto cleanup_exit; ++ } ++ dev->max_data_lanes = 1; ++ dev->bus_flags = ep->bus.mipi_csi1.strobe; ++ break; ++ default: ++ /* Unsupported bus type */ ++ unicam_err(dev, "sub-device %s is not a CSI2 or CCP2 device %d\n", ++ sensor_node->name, ep->bus_type); ++ goto cleanup_exit; ++ } ++ ++ /* Store bus type - CSI2 or CCP2 */ ++ dev->bus_type = ep->bus_type; ++ unicam_dbg(3, dev, "bus_type is %d\n", dev->bus_type); ++ ++ /* Store Virtual Channel number */ ++ dev->virtual_channel = ep->base.id; ++ ++ unicam_dbg(3, dev, "v4l2-endpoint: %s\n", ++ dev->bus_type == V4L2_MBUS_CSI2 ? "CSI2" : "CCP2"); ++ unicam_dbg(3, dev, "Virtual Channel=%d\n", dev->virtual_channel); ++ if (dev->bus_type == V4L2_MBUS_CSI2) ++ unicam_dbg(3, dev, "flags=0x%08x\n", ep->bus.mipi_csi2.flags); ++ unicam_dbg(3, dev, "num_data_lanes=%d\n", dev->max_data_lanes); ++ ++ unicam_dbg(1, dev, "found sub-device %s\n", sensor_node->name); ++ ++ subdevs = devm_kzalloc(&dev->pdev->dev, sizeof(*subdevs), GFP_KERNEL); ++ if (!subdevs) { ++ ret = -ENOMEM; ++ goto cleanup_exit; ++ } ++ subdevs[0] = asd; ++ dev->notifier.subdevs = subdevs; ++ dev->notifier.num_subdevs = 1; ++ dev->notifier.ops = &unicam_async_ops; ++ ret = v4l2_async_notifier_register(&dev->v4l2_dev, ++ &dev->notifier); ++ if (ret) { ++ unicam_err(dev, "Error registering async notifier - ret %d\n", ++ ret); ++ ret = -EINVAL; ++ } ++ ++cleanup_exit: ++ if (remote_ep) ++ of_node_put(remote_ep); ++ if (sensor_node) ++ of_node_put(sensor_node); ++ if (ep_node) ++ of_node_put(ep_node); ++ ++ return ret; ++} ++ ++static int unicam_probe(struct platform_device *pdev) ++{ ++ struct unicam_cfg *unicam_cfg; ++ struct unicam_device *unicam; ++ struct v4l2_ctrl_handler *hdl; ++ struct resource *res; ++ int ret; ++ ++ unicam = devm_kzalloc(&pdev->dev, sizeof(*unicam), GFP_KERNEL); ++ if (!unicam) ++ return -ENOMEM; ++ ++ unicam->pdev = pdev; ++ unicam_cfg = &unicam->cfg; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ unicam_cfg->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(unicam_cfg->base)) { ++ unicam_err(unicam, "Failed to get main io block\n"); ++ return PTR_ERR(unicam_cfg->base); ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ unicam_cfg->clk_gate_base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(unicam_cfg->clk_gate_base)) { ++ unicam_err(unicam, "Failed to get 2nd io block\n"); ++ return PTR_ERR(unicam_cfg->clk_gate_base); ++ } ++ ++ unicam->clock = devm_clk_get(&pdev->dev, "lp"); ++ if (IS_ERR(unicam->clock)) { ++ unicam_err(unicam, "Failed to get clock\n"); ++ return PTR_ERR(unicam->clock); ++ } ++ ++ ret = platform_get_irq(pdev, 0); ++ if (ret <= 0) { ++ dev_err(&pdev->dev, "No IRQ resource\n"); ++ return -ENODEV; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, ret, unicam_isr, 0, ++ "unicam_capture0", unicam); ++ if (ret) { ++ dev_err(&pdev->dev, "Unable to request interrupt\n"); ++ return -EINVAL; ++ } ++ ++ ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev); ++ if (ret) { ++ unicam_err(unicam, ++ "Unable to register v4l2 device.\n"); ++ return ret; ++ } ++ ++ /* Reserve space for the controls */ ++ hdl = &unicam->ctrl_handler; ++ ret = v4l2_ctrl_handler_init(hdl, 16); ++ if (ret < 0) ++ goto probe_out_v4l2_unregister; ++ unicam->v4l2_dev.ctrl_handler = hdl; ++ ++ /* set the driver data in platform device */ ++ platform_set_drvdata(pdev, unicam); ++ ++ ret = of_unicam_connect_subdevs(unicam); ++ if (ret) { ++ dev_err(&pdev->dev, "Failed to connect subdevs\n"); ++ goto free_hdl; ++ } ++ ++ /* Enable the block power domain */ ++ pm_runtime_enable(&pdev->dev); ++ ++ return 0; ++ ++free_hdl: ++ v4l2_ctrl_handler_free(hdl); ++probe_out_v4l2_unregister: ++ v4l2_device_unregister(&unicam->v4l2_dev); ++ return ret; ++} ++ ++static int unicam_remove(struct platform_device *pdev) ++{ ++ struct unicam_device *unicam = platform_get_drvdata(pdev); ++ ++ unicam_dbg(2, unicam, "%s\n", __func__); ++ ++ pm_runtime_disable(&pdev->dev); ++ ++ v4l2_async_notifier_unregister(&unicam->notifier); ++ v4l2_ctrl_handler_free(&unicam->ctrl_handler); ++ v4l2_device_unregister(&unicam->v4l2_dev); ++ video_unregister_device(&unicam->video_dev); ++ if (unicam->sensor_config) ++ v4l2_subdev_free_pad_config(unicam->sensor_config); ++ ++ return 0; ++} ++ ++static const struct of_device_id unicam_of_match[] = { ++ { .compatible = "brcm,bcm2835-unicam", }, ++ { /* sentinel */ }, ++}; ++MODULE_DEVICE_TABLE(of, unicam_of_match); ++ ++static struct platform_driver unicam_driver = { ++ .probe = unicam_probe, ++ .remove = unicam_remove, ++ .driver = { ++ .name = UNICAM_MODULE_NAME, ++ .of_match_table = of_match_ptr(unicam_of_match), ++ }, ++}; ++ ++module_platform_driver(unicam_driver); ++ ++MODULE_AUTHOR("Dave Stevenson "); ++MODULE_DESCRIPTION("BCM2835 Unicam driver"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(UNICAM_VERSION); +--- /dev/null ++++ b/drivers/media/platform/bcm2835/vc4-regs-unicam.h +@@ -0,0 +1,266 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++/* ++ * Copyright (C) 2017 Raspberry Pi Trading. ++ * Dave Stevenson ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS ++ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ++ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN ++ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE ++ * SOFTWARE. ++ */ ++ ++#ifndef VC4_REGS_UNICAM_H ++#define VC4_REGS_UNICAM_H ++ ++/* ++ * The following values are taken from files found within the code drop ++ * made by Broadcom for the BCM21553 Graphics Driver, predominantly in ++ * brcm_usrlib/dag/vmcsx/vcinclude/hardware_vc4.h. ++ * They have been modified to be only the register offset. ++ */ ++#define UNICAM_CTRL 0x000 ++#define UNICAM_STA 0x004 ++#define UNICAM_ANA 0x008 ++#define UNICAM_PRI 0x00c ++#define UNICAM_CLK 0x010 ++#define UNICAM_CLT 0x014 ++#define UNICAM_DAT0 0x018 ++#define UNICAM_DAT1 0x01c ++#define UNICAM_DAT2 0x020 ++#define UNICAM_DAT3 0x024 ++#define UNICAM_DLT 0x028 ++#define UNICAM_CMP0 0x02c ++#define UNICAM_CMP1 0x030 ++#define UNICAM_CAP0 0x034 ++#define UNICAM_CAP1 0x038 ++#define UNICAM_ICTL 0x100 ++#define UNICAM_ISTA 0x104 ++#define UNICAM_IDI0 0x108 ++#define UNICAM_IPIPE 0x10c ++#define UNICAM_IBSA0 0x110 ++#define UNICAM_IBEA0 0x114 ++#define UNICAM_IBLS 0x118 ++#define UNICAM_IBWP 0x11c ++#define UNICAM_IHWIN 0x120 ++#define UNICAM_IHSTA 0x124 ++#define UNICAM_IVWIN 0x128 ++#define UNICAM_IVSTA 0x12c ++#define UNICAM_ICC 0x130 ++#define UNICAM_ICS 0x134 ++#define UNICAM_IDC 0x138 ++#define UNICAM_IDPO 0x13c ++#define UNICAM_IDCA 0x140 ++#define UNICAM_IDCD 0x144 ++#define UNICAM_IDS 0x148 ++#define UNICAM_DCS 0x200 ++#define UNICAM_DBSA0 0x204 ++#define UNICAM_DBEA0 0x208 ++#define UNICAM_DBWP 0x20c ++#define UNICAM_DBCTL 0x300 ++#define UNICAM_IBSA1 0x304 ++#define UNICAM_IBEA1 0x308 ++#define UNICAM_IDI1 0x30c ++#define UNICAM_DBSA1 0x310 ++#define UNICAM_DBEA1 0x314 ++#define UNICAM_MISC 0x400 ++ ++/* ++ * The following bitmasks are from the kernel released by Broadcom ++ * for Android - https://android.googlesource.com/kernel/bcm/ ++ * The Rhea, Hawaii, and Java chips all contain the same VideoCore4 ++ * Unicam block as BCM2835, as defined in eg ++ * arch/arm/mach-rhea/include/mach/rdb_A0/brcm_rdb_cam.h and similar. ++ * Values reworked to use the kernel BIT and GENMASK macros. ++ * ++ * Some of the bit mnenomics have been amended to match the datasheet. ++ */ ++/* UNICAM_CTRL Register */ ++#define UNICAM_CPE BIT(0) ++#define UNICAM_MEM BIT(1) ++#define UNICAM_CPR BIT(2) ++#define UNICAM_CPM_MASK GENMASK(3, 3) ++#define UNICAM_CPM_CSI2 0 ++#define UNICAM_CPM_CCP2 1 ++#define UNICAM_SOE BIT(4) ++#define UNICAM_DCM_MASK GENMASK(5, 5) ++#define UNICAM_DCM_STROBE 0 ++#define UNICAM_DCM_DATA 1 ++#define UNICAM_SLS BIT(6) ++#define UNICAM_PFT_MASK GENMASK(11, 8) ++#define UNICAM_OET_MASK GENMASK(20, 12) ++ ++/* UNICAM_STA Register */ ++#define UNICAM_SYN BIT(0) ++#define UNICAM_CS BIT(1) ++#define UNICAM_SBE BIT(2) ++#define UNICAM_PBE BIT(3) ++#define UNICAM_HOE BIT(4) ++#define UNICAM_PLE BIT(5) ++#define UNICAM_SSC BIT(6) ++#define UNICAM_CRCE BIT(7) ++#define UNICAM_OES BIT(8) ++#define UNICAM_IFO BIT(9) ++#define UNICAM_OFO BIT(10) ++#define UNICAM_BFO BIT(11) ++#define UNICAM_DL BIT(12) ++#define UNICAM_PS BIT(13) ++#define UNICAM_IS BIT(14) ++#define UNICAM_PI0 BIT(15) ++#define UNICAM_PI1 BIT(16) ++#define UNICAM_FSI_S BIT(17) ++#define UNICAM_FEI_S BIT(18) ++#define UNICAM_LCI_S BIT(19) ++#define UNICAM_BUF0_RDY BIT(20) ++#define UNICAM_BUF0_NO BIT(21) ++#define UNICAM_BUF1_RDY BIT(22) ++#define UNICAM_BUF1_NO BIT(23) ++#define UNICAM_DI BIT(24) ++ ++#define UNICAM_STA_MASK_ALL \ ++ (UNICAM_DL + \ ++ UNICAM_SBE + \ ++ UNICAM_PBE + \ ++ UNICAM_HOE + \ ++ UNICAM_PLE + \ ++ UNICAM_SSC + \ ++ UNICAM_CRCE + \ ++ UNICAM_IFO + \ ++ UNICAM_OFO + \ ++ UNICAM_PS + \ ++ UNICAM_PI0 + \ ++ UNICAM_PI1) ++ ++/* UNICAM_ANA Register */ ++#define UNICAM_APD BIT(0) ++#define UNICAM_BPD BIT(1) ++#define UNICAM_AR BIT(2) ++#define UNICAM_DDL BIT(3) ++#define UNICAM_CTATADJ_MASK GENMASK(7, 4) ++#define UNICAM_PTATADJ_MASK GENMASK(11, 8) ++ ++/* UNICAM_PRI Register */ ++#define UNICAM_PE BIT(0) ++#define UNICAM_PT_MASK GENMASK(2, 1) ++#define UNICAM_NP_MASK GENMASK(7, 4) ++#define UNICAM_PP_MASK GENMASK(11, 8) ++#define UNICAM_BS_MASK GENMASK(15, 12) ++#define UNICAM_BL_MASK GENMASK(17, 16) ++ ++/* UNICAM_CLK Register */ ++#define UNICAM_CLE BIT(0) ++#define UNICAM_CLPD BIT(1) ++#define UNICAM_CLLPE BIT(2) ++#define UNICAM_CLHSE BIT(3) ++#define UNICAM_CLTRE BIT(4) ++#define UNICAM_CLAC_MASK GENMASK(8, 5) ++#define UNICAM_CLSTE BIT(29) ++ ++/* UNICAM_CLT Register */ ++#define UNICAM_CLT1_MASK GENMASK(7, 0) ++#define UNICAM_CLT2_MASK GENMASK(15, 8) ++ ++/* UNICAM_DATn Registers */ ++#define UNICAM_DLE BIT(0) ++#define UNICAM_DLPD BIT(1) ++#define UNICAM_DLLPE BIT(2) ++#define UNICAM_DLHSE BIT(3) ++#define UNICAM_DLTRE BIT(4) ++#define UNICAM_DLSM BIT(5) ++#define UNICAM_DLFO BIT(28) ++#define UNICAM_DLSTE BIT(29) ++ ++#define UNICAM_DAT_MASK_ALL (UNICAM_DLSTE + UNICAM_DLFO) ++ ++/* UNICAM_DLT Register */ ++#define UNICAM_DLT1_MASK GENMASK(7, 0) ++#define UNICAM_DLT2_MASK GENMASK(15, 8) ++#define UNICAM_DLT3_MASK GENMASK(23, 16) ++ ++/* UNICAM_ICTL Register */ ++#define UNICAM_FSIE BIT(0) ++#define UNICAM_FEIE BIT(1) ++#define UNICAM_IBOB BIT(2) ++#define UNICAM_FCM BIT(3) ++#define UNICAM_TFC BIT(4) ++#define UNICAM_LIP_MASK GENMASK(6, 5) ++#define UNICAM_LCIE_MASK GENMASK(28, 16) ++ ++/* UNICAM_IDI0/1 Register */ ++#define UNICAM_ID0_MASK GENMASK(7, 0) ++#define UNICAM_ID1_MASK GENMASK(15, 8) ++#define UNICAM_ID2_MASK GENMASK(23, 16) ++#define UNICAM_ID3_MASK GENMASK(31, 24) ++ ++/* UNICAM_ISTA Register */ ++#define UNICAM_FSI BIT(0) ++#define UNICAM_FEI BIT(1) ++#define UNICAM_LCI BIT(2) ++ ++#define UNICAM_ISTA_MASK_ALL (UNICAM_FSI + UNICAM_FEI + UNICAM_LCI) ++ ++/* UNICAM_IPIPE Register */ ++#define UNICAM_PUM_MASK GENMASK(2, 0) ++ /* Unpacking modes */ ++ #define UNICAM_PUM_NONE 0 ++ #define UNICAM_PUM_UNPACK6 1 ++ #define UNICAM_PUM_UNPACK7 2 ++ #define UNICAM_PUM_UNPACK8 3 ++ #define UNICAM_PUM_UNPACK10 4 ++ #define UNICAM_PUM_UNPACK12 5 ++ #define UNICAM_PUM_UNPACK14 6 ++ #define UNICAM_PUM_UNPACK16 7 ++#define UNICAM_DDM_MASK GENMASK(6, 3) ++#define UNICAM_PPM_MASK GENMASK(9, 7) ++ /* Packing modes */ ++ #define UNICAM_PPM_NONE 0 ++ #define UNICAM_PPM_PACK8 1 ++ #define UNICAM_PPM_PACK10 2 ++ #define UNICAM_PPM_PACK12 3 ++ #define UNICAM_PPM_PACK14 4 ++ #define UNICAM_PPM_PACK16 5 ++#define UNICAM_DEM_MASK GENMASK(11, 10) ++#define UNICAM_DEBL_MASK GENMASK(14, 12) ++#define UNICAM_ICM_MASK GENMASK(16, 15) ++#define UNICAM_IDM_MASK GENMASK(17, 17) ++ ++/* UNICAM_ICC Register */ ++#define UNICAM_ICFL_MASK GENMASK(4, 0) ++#define UNICAM_ICFH_MASK GENMASK(9, 5) ++#define UNICAM_ICST_MASK GENMASK(12, 10) ++#define UNICAM_ICLT_MASK GENMASK(15, 13) ++#define UNICAM_ICLL_MASK GENMASK(31, 16) ++ ++/* UNICAM_DCS Register */ ++#define UNICAM_DIE BIT(0) ++#define UNICAM_DIM BIT(1) ++#define UNICAM_DBOB BIT(3) ++#define UNICAM_FDE BIT(4) ++#define UNICAM_LDP BIT(5) ++#define UNICAM_EDL_MASK GENMASK(15, 8) ++ ++/* UNICAM_DBCTL Register */ ++#define UNICAM_DBEN BIT(0) ++#define UNICAM_BUF0_IE BIT(1) ++#define UNICAM_BUF1_IE BIT(2) ++ ++/* UNICAM_CMP[0,1] register */ ++#define UNICAM_PCE BIT(31) ++#define UNICAM_GI BIT(9) ++#define UNICAM_CPH BIT(8) ++#define UNICAM_PCVC_MASK GENMASK(7, 6) ++#define UNICAM_PCDT_MASK GENMASK(5, 0) ++ ++/* UNICAM_MISC register */ ++#define UNICAM_FL0 BIT(6) ++#define UNICAM_FL1 BIT(9) ++ ++#endif diff --git a/target/linux/brcm2708/patches-4.19/950-0182-media-adv7180-Nasty-hack-to-allow-input-selection.patch b/target/linux/brcm2708/patches-4.19/950-0182-media-adv7180-Nasty-hack-to-allow-input-selection.patch new file mode 100644 index 0000000000..b48db8b0d1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0182-media-adv7180-Nasty-hack-to-allow-input-selection.patch @@ -0,0 +1,89 @@ +From 34c4ee6f5d7143f6c8be604715f9b52b7540e38d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 15:00:04 +0000 +Subject: [PATCH] media: adv7180: Nasty hack to allow input selection. + +Whilst the adv7180 driver support s_routing, nothing else +does, and there is a missing lump of framework code to +define the mapping from connectors on a board to the inputs +they represent on the ADV7180. + +Add a nasty hack to take a module parameter that is passed in +to s_routing on any call to G_STD, or S_STD (or subdev +g_input_status call). + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/adv7180.c | 30 ++++++++++++++++++++++++++++-- + 1 file changed, 28 insertions(+), 2 deletions(-) + +--- a/drivers/media/i2c/adv7180.c ++++ b/drivers/media/i2c/adv7180.c +@@ -189,6 +189,10 @@ + + #define V4L2_CID_ADV_FAST_SWITCH (V4L2_CID_USER_ADV7180_BASE + 0x00) + ++static int dbg_input; ++module_param(dbg_input, int, 0644); ++MODULE_PARM_DESC(dbg_input, "Input number (0-31)"); ++ + struct adv7180_state; + + #define ADV7180_FLAG_RESET_POWERED BIT(0) +@@ -405,10 +409,24 @@ out: + return ret; + } + ++static void adv7180_check_input(struct v4l2_subdev *sd) ++{ ++ struct adv7180_state *state = to_state(sd); ++ ++ if (state->input != dbg_input) ++ if (adv7180_s_routing(sd, dbg_input, 0, 0)) ++ /* Failed - reset dbg_input */ ++ dbg_input = state->input; ++} ++ + static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status) + { + struct adv7180_state *state = to_state(sd); +- int ret = mutex_lock_interruptible(&state->mutex); ++ int ret; ++ ++ adv7180_check_input(sd); ++ ++ ret = mutex_lock_interruptible(&state->mutex); + if (ret) + return ret; + +@@ -434,7 +452,11 @@ static int adv7180_program_std(struct ad + static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std) + { + struct adv7180_state *state = to_state(sd); +- int ret = mutex_lock_interruptible(&state->mutex); ++ int ret; ++ ++ adv7180_check_input(sd); ++ ++ ret = mutex_lock_interruptible(&state->mutex); + + if (ret) + return ret; +@@ -456,6 +478,8 @@ static int adv7180_g_std(struct v4l2_sub + { + struct adv7180_state *state = to_state(sd); + ++ adv7180_check_input(sd); ++ + *norm = state->curr_norm; + + return 0; +@@ -810,6 +834,8 @@ static int adv7180_s_stream(struct v4l2_ + return 0; + } + ++ adv7180_check_input(sd); ++ + /* Must wait until querystd released the lock */ + ret = mutex_lock_interruptible(&state->mutex); + if (ret) diff --git a/target/linux/brcm2708/patches-4.19/950-0183-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch b/target/linux/brcm2708/patches-4.19/950-0183-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch new file mode 100644 index 0000000000..551a60ce9e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0183-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch @@ -0,0 +1,202 @@ +From 32282fb05466e5d5767b598e60136ef584847dc4 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 15:00:20 +0000 +Subject: [PATCH] BCM283x DT: Add CSI nodes to the device tree. + +Adds CSI nodes to all the upstream device tree configs + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 1 + + arch/arm/boot/dts/bcm2835-rpi-a.dts | 1 + + arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 + + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 + + arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 + + arch/arm/boot/dts/bcm2835-rpi-zero.dts | 1 + + arch/arm/boot/dts/bcm2835-rpi.dtsi | 8 ++++++ + arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 + + arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 + + arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi | 8 ++++++ + arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi | 8 ++++++ + arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi | 8 ++++++ + arch/arm/boot/dts/bcm283x.dtsi | 26 +++++++++++++++++++ + .../dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi | 1 + + 14 files changed, 67 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi + create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi + create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi + create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi + +--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +@@ -3,6 +3,7 @@ + #include "bcm2835.dtsi" + #include "bcm2835-rpi.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; +--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts +@@ -3,6 +3,7 @@ + #include "bcm2835.dtsi" + #include "bcm2835-rpi.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,model-a", "brcm,bcm2835"; +--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +@@ -4,6 +4,7 @@ + #include "bcm2835-rpi.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; +--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +@@ -4,6 +4,7 @@ + #include "bcm2835-rpi.dtsi" + #include "bcm283x-rpi-smsc9512.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; +--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts +@@ -4,6 +4,7 @@ + #include "bcm2835-rpi.dtsi" + #include "bcm283x-rpi-smsc9512.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,model-b", "brcm,bcm2835"; +--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts +@@ -13,6 +13,7 @@ + #include "bcm2835.dtsi" + #include "bcm2835-rpi.dtsi" + #include "bcm283x-rpi-usb-otg.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,model-zero", "brcm,bcm2835"; +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -108,3 +108,11 @@ + &dsi1 { + power-domains = <&power RPI_POWER_DOMAIN_DSI1>; + }; ++ ++&csi0 { ++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; ++}; ++ ++&csi1 { ++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; ++}; +--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +@@ -4,6 +4,7 @@ + #include "bcm2835-rpi.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; +--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +@@ -4,6 +4,7 @@ + #include "bcm2835-rpi.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi +@@ -0,0 +1,8 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi0 { ++ port { ++ endpoint { ++ data-lanes = <1 2>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi +@@ -0,0 +1,8 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi1 { ++ port { ++ endpoint { ++ data-lanes = <1 2>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi +@@ -0,0 +1,8 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi1 { ++ port { ++ endpoint { ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -565,6 +565,32 @@ + status = "disabled"; + }; + ++ csi0: csi@7e800000 { ++ compatible = "brcm,bcm2835-unicam"; ++ reg = <0x7e800000 0x800>, ++ <0x7e802000 0x4>; ++ interrupts = <2 6>; ++ clocks = <&clocks BCM2835_CLOCK_CAM0>; ++ clock-names = "lp"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ status = "disabled"; ++ }; ++ ++ csi1: csi@7e801000 { ++ compatible = "brcm,bcm2835-unicam"; ++ reg = <0x7e801000 0x800>, ++ <0x7e802004 0x4>; ++ interrupts = <2 7>; ++ clocks = <&clocks BCM2835_CLOCK_CAM1>; ++ clock-names = "lp"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ status = "disabled"; ++ }; ++ + i2c1: i2c@7e804000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e804000 0x1000>; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi +@@ -0,0 +1,8 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi1 { ++ port { ++ endpoint { ++ data-lanes = <1 2>; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0183-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch b/target/linux/brcm2708/patches-4.19/950-0183-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch deleted file mode 100644 index 5519a06936..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0183-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 627f981e148bb9f7dc01df97fa20fe6124f417f7 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 7 Nov 2018 17:43:10 +0000 -Subject: [PATCH 183/806] overlays: uart0 - return GPIOs 14 and 15 to inputs - -In the event that alternate pins are used (only useful on Compute -Modules), return the standard pins to inputs to avoid double-mapping -them. - -See: https://www.raspberrypi.org/forums/viewtopic.php?p=1388713#p1316977 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/uart0-overlay.dts | 13 +++++++------ - 1 file changed, 7 insertions(+), 6 deletions(-) - ---- a/arch/arm/boot/dts/overlays/uart0-overlay.dts -+++ b/arch/arm/boot/dts/overlays/uart0-overlay.dts -@@ -17,16 +17,17 @@ - target = <&gpio>; - __overlay__ { - uart0_pins: uart0_pins { -- brcm,pins = <14 15>; -- brcm,function = <4>; /* alt0 */ -- brcm,pull = <0 2>; -+ brcm,pins = <14 15 14 15>; -+ brcm,function = <0 0 4 4>; /* alt0 */ -+ brcm,pull = <0 0 0 2>; - }; - }; - }; - - __overrides__ { -- txd0_pin = <&uart0_pins>,"brcm,pins:0"; -- rxd0_pin = <&uart0_pins>,"brcm,pins:4"; -- pin_func = <&uart0_pins>,"brcm,function:0"; -+ txd0_pin = <&uart0_pins>,"brcm,pins:8"; -+ rxd0_pin = <&uart0_pins>,"brcm,pins:12"; -+ pin_func = <&uart0_pins>,"brcm,function:8", -+ <&uart0_pins>,"brcm,function:12"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0184-BCM270X_DT-Add-CSI-defines-for-all-the-downstream-Pi.patch b/target/linux/brcm2708/patches-4.19/950-0184-BCM270X_DT-Add-CSI-defines-for-all-the-downstream-Pi.patch new file mode 100644 index 0000000000..a78a9f3157 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0184-BCM270X_DT-Add-CSI-defines-for-all-the-downstream-Pi.patch @@ -0,0 +1,117 @@ +From 831423a9f14d46f69c78136d37c2ab0cdaa5bdb1 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 15:00:45 +0000 +Subject: [PATCH] BCM270X_DT: Add CSI defines for all the downstream Pi + platforms + +Adds the CSI device includes for the bcm27xx platform DTS files + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi-cm.dts | 2 ++ + arch/arm/boot/dts/bcm2708-rpi.dtsi | 8 ++++++++ + arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 1 + + arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 1 + + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 1 + + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 2 ++ + 9 files changed, 18 insertions(+) + +--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2708.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; +--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -2,6 +2,7 @@ + + #include "bcm2708.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + model = "Raspberry Pi Model B+"; +--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -2,6 +2,7 @@ + + #include "bcm2708.dtsi" + #include "bcm283x-rpi-smsc9512.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + model = "Raspberry Pi Model B"; +--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +@@ -1,6 +1,8 @@ + /dts-v1/; + + #include "bcm2708-rpi-cm.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" + + / { + model = "Raspberry Pi Compute Module"; +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -161,3 +161,11 @@ sdhost_pins: &sdhost_gpio48 { + &vec { + status = "disabled"; + }; ++ ++&csi0 { ++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; ++}; ++ ++&csi1 { ++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; ++}; +--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -2,6 +2,7 @@ + + #include "bcm2709.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts +@@ -2,6 +2,7 @@ + + #include "bcm2710.dtsi" + #include "bcm283x-rpi-lan7515.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -2,6 +2,7 @@ + + #include "bcm2710.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -1,6 +1,8 @@ + /dts-v1/; + + #include "bcm2710.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" + + / { + model = "Raspberry Pi Compute Module 3"; diff --git a/target/linux/brcm2708/patches-4.19/950-0184-mmc-bcm2835-sdhost-Fix-warnings-on-arm64.patch b/target/linux/brcm2708/patches-4.19/950-0184-mmc-bcm2835-sdhost-Fix-warnings-on-arm64.patch deleted file mode 100644 index 8964a5905d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0184-mmc-bcm2835-sdhost-Fix-warnings-on-arm64.patch +++ /dev/null @@ -1,252 +0,0 @@ -From c961f0534bdf659108eaf3352989683411767611 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 12 Nov 2018 22:54:40 +0000 -Subject: [PATCH 184/806] mmc: bcm2835-sdhost: Fix warnings on arm64 - -Signed-off-by: Phil Elwell ---- - drivers/mmc/host/bcm2835-sdhost.c | 56 +++++++++++++++---------------- - 1 file changed, 28 insertions(+), 28 deletions(-) - ---- a/drivers/mmc/host/bcm2835-sdhost.c -+++ b/drivers/mmc/host/bcm2835-sdhost.c -@@ -247,7 +247,7 @@ static void log_init(struct device *dev, - GFP_KERNEL); - if (sdhost_log_buf) { - pr_info("sdhost: log_buf @ %p (%x)\n", -- sdhost_log_buf, sdhost_log_addr); -+ sdhost_log_buf, (u32)sdhost_log_addr); - timer_base = ioremap_nocache(bus_to_phys + 0x7e003000, SZ_4K); - if (!timer_base) - pr_err("sdhost: failed to remap timer\n"); -@@ -301,7 +301,7 @@ static void log_dump(void) - } - } - --#define log_event(event, param1, param2) log_event_impl(event, param1, param2) -+#define log_event(event, param1, param2) log_event_impl(event, (u32)(uintptr_t)param1, (u32)(uintptr_t)param2) - - #else - -@@ -527,7 +527,7 @@ static void bcm2835_sdhost_dma_complete( - unsigned long flags; - - spin_lock_irqsave(&host->lock, flags); -- log_event("DMA<", (u32)host->data, bcm2835_sdhost_read(host, SDHSTS)); -+ log_event("DMA<", host->data, bcm2835_sdhost_read(host, SDHSTS)); - log_event("DMA ", bcm2835_sdhost_read(host, SDCMD), - bcm2835_sdhost_read(host, SDEDM)); - -@@ -559,7 +559,7 @@ static void bcm2835_sdhost_dma_complete( - - bcm2835_sdhost_finish_data(host); - -- log_event("DMA>", (u32)host->data, 0); -+ log_event("DMA>", host->data, 0); - spin_unlock_irqrestore(&host->lock, flags); - } - -@@ -748,7 +748,7 @@ static void bcm2835_sdhost_transfer_pio( - u32 sdhsts; - bool is_read; - BUG_ON(!host->data); -- log_event("XFP<", (u32)host->data, host->blocks); -+ log_event("XFP<", host->data, host->blocks); - - is_read = (host->data->flags & MMC_DATA_READ) != 0; - if (is_read) -@@ -773,7 +773,7 @@ static void bcm2835_sdhost_transfer_pio( - sdhsts); - host->data->error = -ETIMEDOUT; - } -- log_event("XFP>", (u32)host->data, host->blocks); -+ log_event("XFP>", host->data, host->blocks); - } - - static void bcm2835_sdhost_prepare_dma(struct bcm2835_host *host, -@@ -783,7 +783,7 @@ static void bcm2835_sdhost_prepare_dma(s - struct dma_async_tx_descriptor *desc = NULL; - struct dma_chan *dma_chan; - -- log_event("PRD<", (u32)data, 0); -+ log_event("PRD<", data, 0); - pr_debug("bcm2835_sdhost_prepare_dma()\n"); - - dma_chan = host->dma_chan_rxtx; -@@ -794,7 +794,7 @@ static void bcm2835_sdhost_prepare_dma(s - dir_data = DMA_TO_DEVICE; - dir_slave = DMA_MEM_TO_DEV; - } -- log_event("PRD1", (u32)dma_chan, 0); -+ log_event("PRD1", dma_chan, 0); - - BUG_ON(!dma_chan->device); - BUG_ON(!dma_chan->device->dev); -@@ -841,7 +841,7 @@ static void bcm2835_sdhost_prepare_dma(s - desc = dmaengine_prep_slave_sg(dma_chan, data->sg, - len, dir_slave, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); -- log_event("PRD3", (u32)desc, 0); -+ log_event("PRD3", desc, 0); - - if (desc) { - desc->callback = bcm2835_sdhost_dma_complete; -@@ -850,12 +850,12 @@ static void bcm2835_sdhost_prepare_dma(s - host->dma_chan = dma_chan; - host->dma_dir = dir_data; - } -- log_event("PDM>", (u32)data, 0); -+ log_event("PDM>", data, 0); - } - - static void bcm2835_sdhost_start_dma(struct bcm2835_host *host) - { -- log_event("SDMA", (u32)host->data, (u32)host->dma_chan); -+ log_event("SDMA", host->data, host->dma_chan); - dmaengine_submit(host->dma_desc); - dma_async_issue_pending(host->dma_chan); - } -@@ -1079,7 +1079,7 @@ static void bcm2835_sdhost_finish_data(s - data = host->data; - BUG_ON(!data); - -- log_event("FDA<", (u32)host->mrq, (u32)host->cmd); -+ log_event("FDA<", host->mrq, host->cmd); - pr_debug("finish_data(error %d, stop %d, sbc %d)\n", - data->error, data->stop ? 1 : 0, - host->mrq->sbc ? 1 : 0); -@@ -1102,7 +1102,7 @@ static void bcm2835_sdhost_finish_data(s - } - else - bcm2835_sdhost_transfer_complete(host); -- log_event("FDA>", (u32)host->mrq, (u32)host->cmd); -+ log_event("FDA>", host->mrq, host->cmd); - } - - static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host) -@@ -1116,7 +1116,7 @@ static void bcm2835_sdhost_transfer_comp - data = host->data; - host->data = NULL; - -- log_event("TCM<", (u32)data, data->error); -+ log_event("TCM<", data, data->error); - pr_debug("transfer_complete(error %d, stop %d)\n", - data->error, data->stop ? 1 : 0); - -@@ -1138,7 +1138,7 @@ static void bcm2835_sdhost_transfer_comp - bcm2835_sdhost_wait_transfer_complete(host); - tasklet_schedule(&host->finish_tasklet); - } -- log_event("TCM>", (u32)data, 0); -+ log_event("TCM>", data, 0); - } - - /* If irq_flags is valid, the caller is in a thread context and is allowed -@@ -1153,7 +1153,7 @@ static void bcm2835_sdhost_finish_comman - int timediff = 0; - #endif - -- log_event("FCM<", (u32)host->mrq, (u32)host->cmd); -+ log_event("FCM<", host->mrq, host->cmd); - pr_debug("finish_command(%x)\n", bcm2835_sdhost_read(host, SDCMD)); - - BUG_ON(!host->cmd || !host->mrq); -@@ -1310,7 +1310,7 @@ static void bcm2835_sdhost_finish_comman - else if (host->data_complete) - bcm2835_sdhost_transfer_complete(host); - } -- log_event("FCM>", (u32)host->mrq, (u32)host->cmd); -+ log_event("FCM>", host->mrq, host->cmd); - } - - static void bcm2835_sdhost_timeout(struct timer_list *t) -@@ -1347,7 +1347,7 @@ static void bcm2835_sdhost_timeout(struc - - static void bcm2835_sdhost_busy_irq(struct bcm2835_host *host, u32 intmask) - { -- log_event("IRQB", (u32)host->cmd, intmask); -+ log_event("IRQB", host->cmd, intmask); - if (!host->cmd) { - pr_err("%s: got command busy interrupt 0x%08x even " - "though no command operation was in progress.\n", -@@ -1400,7 +1400,7 @@ static void bcm2835_sdhost_data_irq(stru - data/space available FIFO status bits. It is therefore not - an error to get here when there is no data transfer in - progress. */ -- log_event("IRQD", (u32)host->data, intmask); -+ log_event("IRQD", host->data, intmask); - if (!host->data) - return; - -@@ -1437,7 +1437,7 @@ static void bcm2835_sdhost_data_irq(stru - - static void bcm2835_sdhost_block_irq(struct bcm2835_host *host, u32 intmask) - { -- log_event("IRQK", (u32)host->data, intmask); -+ log_event("IRQK", host->data, intmask); - if (!host->data) { - pr_err("%s: got block interrupt 0x%08x even " - "though no data operation was in progress.\n", -@@ -1695,10 +1695,10 @@ static void bcm2835_sdhost_request(struc - edm = bcm2835_sdhost_read(host, SDEDM); - fsm = edm & SDEDM_FSM_MASK; - -- log_event("REQ<", (u32)mrq, edm); -+ log_event("REQ<", mrq, edm); - if ((fsm != SDEDM_FSM_IDENTMODE) && - (fsm != SDEDM_FSM_DATAMODE)) { -- log_event("REQ!", (u32)mrq, edm); -+ log_event("REQ!", mrq, edm); - if (host->debug) { - pr_warn("%s: previous command (%d) not complete (EDM %x)\n", - mmc_hostname(host->mmc), -@@ -1730,11 +1730,11 @@ static void bcm2835_sdhost_request(struc - bcm2835_sdhost_finish_command(host, &flags); - } - -- log_event("CMD ", (u32)mrq->cmd->opcode, -+ log_event("CMD ", mrq->cmd->opcode, - mrq->data ? (u32)mrq->data->blksz : 0); - mmiowb(); - -- log_event("REQ>", (u32)mrq, 0); -+ log_event("REQ>", mrq, 0); - spin_unlock_irqrestore(&host->lock, flags); - } - -@@ -1790,7 +1790,7 @@ static void bcm2835_sdhost_cmd_wait_work - - spin_lock_irqsave(&host->lock, flags); - -- log_event("CWK<", (u32)host->cmd, (u32)host->mrq); -+ log_event("CWK<", host->cmd, host->mrq); - - /* - * If this tasklet gets rescheduled while running, it will -@@ -1805,7 +1805,7 @@ static void bcm2835_sdhost_cmd_wait_work - - mmiowb(); - -- log_event("CWK>", (u32)host->cmd, 0); -+ log_event("CWK>", host->cmd, 0); - - spin_unlock_irqrestore(&host->lock, flags); - } -@@ -1821,7 +1821,7 @@ static void bcm2835_sdhost_tasklet_finis - - spin_lock_irqsave(&host->lock, flags); - -- log_event("TSK<", (u32)host->mrq, 0); -+ log_event("TSK<", host->mrq, 0); - /* - * If this tasklet gets rescheduled while running, it will - * be run again afterwards but without any active request. -@@ -1889,7 +1889,7 @@ static void bcm2835_sdhost_tasklet_finis - } - - mmc_request_done(host->mmc, mrq); -- log_event("TSK>", (u32)mrq, 0); -+ log_event("TSK>", mrq, 0); - } - - int bcm2835_sdhost_add_host(struct bcm2835_host *host) diff --git a/target/linux/brcm2708/patches-4.19/950-0185-Fix-warning-in-bcm2835-smi-nand.patch b/target/linux/brcm2708/patches-4.19/950-0185-Fix-warning-in-bcm2835-smi-nand.patch deleted file mode 100644 index 65eef5e448..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0185-Fix-warning-in-bcm2835-smi-nand.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 2f4524681c940887bc1e7d98b960719c731c85df Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 12 Nov 2018 22:56:35 +0000 -Subject: [PATCH 185/806] Fix warning in bcm2835-smi-nand - -Signed-off-by: Phil Elwell ---- - drivers/mtd/nand/raw/bcm2835_smi_nand.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/mtd/nand/raw/bcm2835_smi_nand.c -+++ b/drivers/mtd/nand/raw/bcm2835_smi_nand.c -@@ -135,10 +135,8 @@ static int bcm2835_smi_nand_probe(struct - struct mtd_info *mtd; - struct device *dev = &pdev->dev; - struct device_node *node = dev->of_node, *smi_node; -- struct mtd_part_parser_data ppdata; - struct smi_settings *smi_settings; - struct bcm2835_smi_instance *smi_inst; -- int ret = -ENXIO; - - if (!node) { - dev_err(dev, "No device tree node supplied!"); diff --git a/target/linux/brcm2708/patches-4.19/950-0185-arm-dt-Add-DT-overlays-for-ADV7282M-OV5647-and-TC358.patch b/target/linux/brcm2708/patches-4.19/950-0185-arm-dt-Add-DT-overlays-for-ADV7282M-OV5647-and-TC358.patch new file mode 100644 index 0000000000..a5f0c76dd1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0185-arm-dt-Add-DT-overlays-for-ADV7282M-OV5647-and-TC358.patch @@ -0,0 +1,481 @@ +From c3ea5332de058ee7b9139133f2f8103b6dff2478 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 15:01:59 +0000 +Subject: [PATCH] arm: dt: Add DT overlays for ADV7282M, OV5647, and + TC358743 + +DT overlays to setup the above devices via i2c_arm and csi1. +(This currently does not use the i2c-mux-pinctrl driver to +dynamically switch the pinctrl) + +tc358743 is tc358743 running at a default link frequency +of 972Mbit/s. This allows up to 1080P50 UYVY on 2 lanes. +There is a parameter to allow changing the link frequency, +but the only values supported by the driver are 297000000 +for 594Mbit/s, and 486000000 for 972Mbit/s. +There is also a parameter to enable 4 lane mode (only +relevant to Compute Module (1 or 3) csi1). + +tc358743-audio overlay enables I2S audio from the TC358743 +to the Pi (SD to GPIO20, SCK to GPIO18, WFS to GPIO19). + +ADV7282M is the Analog Devices analogue video to CSI bridge +chip. + +OV5647 is the Pi V1.3 camera module. Currently the driver only +supports VGA 8bit Bayer and very few controls. + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/overlays/Makefile | 4 + + arch/arm/boot/dts/overlays/README | 51 ++++++++ + .../boot/dts/overlays/adv7282m-overlay.dts | 76 ++++++++++++ + arch/arm/boot/dts/overlays/ov5647-overlay.dts | 87 ++++++++++++++ + .../dts/overlays/tc358743-audio-overlay.dts | 52 ++++++++ + .../boot/dts/overlays/tc358743-overlay.dts | 112 ++++++++++++++++++ + 6 files changed, 382 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/adv7282m-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov5647-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tc358743-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -6,6 +6,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + ads1015.dtbo \ + ads1115.dtbo \ + ads7846.dtbo \ ++ adv7282m.dtbo \ + akkordion-iqdacplus.dtbo \ + allo-boss-dac-pcm512x-audio.dtbo \ + allo-digione.dtbo \ +@@ -81,6 +82,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + mmc.dtbo \ + mpu6050.dtbo \ + mz61581.dtbo \ ++ ov5647.dtbo \ + papirus.dtbo \ + pi3-act-led.dtbo \ + pi3-disable-bt.dtbo \ +@@ -132,6 +134,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + spi2-3cs.dtbo \ + superaudioboard.dtbo \ + sx150x.dtbo \ ++ tc358743.dtbo \ ++ tc358743-audio.dtbo \ + tinylcd35.dtbo \ + uart0.dtbo \ + uart1.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -267,6 +267,15 @@ Params: cs SPI bus + www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt + + ++Name: adv7282m ++Info: Analog Devices ADV7282M analogue video to CSI2 bridge. ++ Uses Unicam1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=adv7282m,= ++Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. ++ This is required for Pi B+, 2, 0, and 0W. ++ ++ + Name: akkordion-iqdacplus + Info: Configures the Digital Dreamtime Akkordion Music Player (based on the + OEM IQAudIO DAC+ or DAC Zero module). +@@ -1284,6 +1293,23 @@ Params: speed Display + xohms Touchpanel sensitivity (X-plate resistance) + + ++Name: ov5647 ++Info: Omnivision OV5647 camera module. ++ Uses Unicam 1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=ov5647,= ++Params: cam0-pwdn GPIO used to control the sensor powerdown line. ++ ++ cam0-led GPIO used to control the sensor led ++ Both these fields should be automatically filled ++ in by the firmware to reflect the default GPIO ++ configuration of the particular Pi variant in ++ use. ++ ++ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. ++ This is required for Pi B+, 2, 0, and 0W. ++ ++ + Name: papirus + Info: PaPiRus ePaper Screen by Pi Supply (both HAT and pHAT) + Load: dtoverlay=papirus,= +@@ -1893,6 +1919,31 @@ Params: sx150-- Enables + connected. + + ++Name: tc358743 ++Info: Toshiba TC358743 HDMI to CSI-2 bridge chip. ++ Uses Unicam 1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=tc358743,= ++Params: 4lane Use 4 lanes (only applicable to Compute Modules ++ CAM1 connector). ++ ++ link-frequency Set the link frequency. Only values of 297000000 ++ (574Mbit/s) and 486000000 (972Mbit/s - default) ++ are supported by the driver. ++ ++ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. ++ This is required for Pi B+, 2, 0, and 0W. ++ ++ ++Name: tc358743-audio ++Info: Used in combination with the tc358743-fast overlay to route the audio ++ from the TC358743 over I2S to the Pi. ++ Wiring is LRCK/WFS to GPIO 19, BCK/SCK to GPIO 18, and DATA/SD to GPIO ++ 20. ++Load: dtoverlay=tc358743-audio,= ++Params: card-name Override the default, "tc358743", card name. ++ ++ + Name: tinylcd35 + Info: 3.5" Color TFT Display by www.tinylcd.com + Options: Touch, RTC, keypad +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts +@@ -0,0 +1,76 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++// Definitions for Analog Devices ADV7282-M video to CSI2 bridge on VC I2C bus ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_vc>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ adv7282: adv7282@21 { ++ compatible = "adi,adv7282-m"; ++ reg = <0x21>; ++ status = "okay"; ++ clock-frequency = <24000000>; ++ port { ++ adv7282_0: endpoint { ++ remote-endpoint = <&csi1_ep>; ++ clock-lanes = <0>; ++ data-lanes = <1>; ++ link-frequencies = ++ /bits/ 64 <297000000>; ++ ++ mclk-frequency = <12000000>; ++ }; ++ }; ++ }; ++ }; ++ }; ++ fragment@1 { ++ target = <&csi1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ csi1_ep: endpoint { ++ remote-endpoint = <&adv7282_0>; ++ }; ++ }; ++ }; ++ }; ++ fragment@2 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <28 29>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ }; ++ fragment@3 { ++ target = <&i2c0_pins>; ++ __overlay__ { ++ brcm,pins = <44 45>; ++ brcm,function = <5>; /* alt1 */ ++ }; ++ }; ++ fragment@4 { ++ target = <&i2c_vc>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ i2c_pins_28_29 = <0>,"+2-3"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts +@@ -0,0 +1,87 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++// Definitions for OV5647 camera module on VC I2C bus ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_vc>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ ov5647: ov5647@36 { ++ compatible = "ov5647"; ++ reg = <0x36>; ++ status = "okay"; ++ ++ pwdn-gpios = <&gpio 41 1>, <&gpio 32 1>; ++ clocks = <&ov5647_clk>; ++ ++ ov5647_clk: camera-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <25000000>; ++ }; ++ ++ port { ++ ov5647_0: endpoint { ++ remote-endpoint = <&csi1_ep>; ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ clock-noncontinuous; ++ link-frequencies = ++ /bits/ 64 <297000000>; ++ }; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&csi1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ csi1_ep: endpoint { ++ remote-endpoint = <&ov5647_0>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <28 29>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ fragment@3 { ++ target = <&i2c0_pins>; ++ __overlay__ { ++ brcm,pins = <44 45>; ++ brcm,function = <5>; /* alt1 */ ++ }; ++ }; ++ fragment@4 { ++ target = <&i2c_vc>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ i2c_pins_28_29 = <0>,"+4-5"; ++ cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; ++ cam0-led = <&ov5647>,"pwdn-gpios:16"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts +@@ -0,0 +1,52 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++// Definitions to add I2S audio from the Toshiba TC358743 HDMI to CSI2 bridge. ++// Requires tc358743 overlay to have been loaded to actually function. ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ tc358743_codec: tc358743-codec { ++ #sound-dai-cells = <0>; ++ compatible = "linux,spdif-dir"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ sound_overlay: __overlay__ { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "tc358743"; ++ simple-audio-card,bitclock-master = <&dailink0_slave>; ++ simple-audio-card,frame-master = <&dailink0_slave>; ++ status = "okay"; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&i2s>; ++ dai-tdm-slot-num = <2>; ++ dai-tdm-slot-width = <32>; ++ }; ++ dailink0_slave: simple-audio-card,codec { ++ sound-dai = <&tc358743_codec>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ card-name = <&sound_overlay>,"simple-audio-card,name"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts +@@ -0,0 +1,112 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++// Definitions for Toshiba TC358743 HDMI to CSI2 bridge on VC I2C bus ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_vc>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ tc358743@0f { ++ compatible = "toshiba,tc358743"; ++ reg = <0x0f>; ++ status = "okay"; ++ ++ clocks = <&tc358743_clk>; ++ clock-names = "refclk"; ++ ++ tc358743_clk: bridge-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <27000000>; ++ }; ++ ++ port { ++ tc358743: endpoint { ++ remote-endpoint = <&csi1_ep>; ++ clock-lanes = <0>; ++ clock-noncontinuous; ++ link-frequencies = ++ /bits/ 64 <486000000>; ++ }; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&csi1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ csi1_ep: endpoint { ++ remote-endpoint = <&tc358743>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c_vc>; ++ __overlay__ { ++ tc358743@0f { ++ port { ++ endpoint { ++ data-lanes = <1 2>; ++ }; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2c_vc>; ++ __dormant__ { ++ tc358743@0f { ++ port { ++ endpoint { ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <28 29>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ fragment@5 { ++ target = <&i2c0_pins>; ++ __overlay__ { ++ brcm,pins = <44 45>; ++ brcm,function = <5>; /* alt1 */ ++ }; ++ }; ++ fragment@6 { ++ target = <&i2c_vc>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ i2c_pins_28_29 = <0>,"+4-5"; ++ 4lane = <0>, "-2+3"; ++ link-frequency = <&tc358743>,"link-frequencies#0"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0186-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch b/target/linux/brcm2708/patches-4.19/950-0186-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch new file mode 100644 index 0000000000..9348af8350 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0186-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch @@ -0,0 +1,135 @@ +From 8ea13a43a77dfb45c836de2d6c747f630dd75275 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 31 Oct 2018 15:02:18 +0000 +Subject: [PATCH] dtoverlays: Add support for ADV7280-M, ADV7281-M and + ADV7281-MA chips. + +The driver that supports the ADV7282-M also supports the ADV7280-M, +ADV7281-M, and ADV7281-MA. +The 7280-M exposes 8 analogue inputs. The 7281-M doesn't have the +I2P deinterlacing block. The 7281-MA has 8 inputs but no I2P. +Otherwise they are the same as ADV7282-M. + +Adds a new overlay "adv728x" that includes the existing adv7282 +overlay but adds several parameters to modify the behaviour. + +Adds a new addr parameter to allow the I2C address to be changed. +(the chip has an address select pin to change between 0x20 and 0x21). + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 13 +++++++ + .../boot/dts/overlays/adv7282m-overlay.dts | 9 +++-- + .../boot/dts/overlays/adv728x-m-overlay.dts | 37 +++++++++++++++++++ + 4 files changed, 56 insertions(+), 4 deletions(-) + create mode 100644 arch/arm/boot/dts/overlays/adv728x-m-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -7,6 +7,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + ads1115.dtbo \ + ads7846.dtbo \ + adv7282m.dtbo \ ++ adv728x-m.dtbo \ + akkordion-iqdacplus.dtbo \ + allo-boss-dac-pcm512x-audio.dtbo \ + allo-digione.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -274,6 +274,19 @@ Info: Analog Devices ADV7282M analogue + Load: dtoverlay=adv7282m,= + Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. + This is required for Pi B+, 2, 0, and 0W. ++ addr Overrides the I2C address (default 0x21) ++ ++ ++Name: adv728x-m ++Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. ++ This is a wrapper for adv7282m, and defaults to ADV7282M. ++Load: dtoverlay=adv728x-m,= ++Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. ++ This is required for Pi B+, 2, 0, and 0W. ++ addr Overrides the I2C address (default 0x21) ++ adv7280m Select ADV7280-M. ++ adv7281m Select ADV7281-M. ++ adv7281ma Select ADV7281-MA. + + + Name: akkordion-iqdacplus +--- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts +@@ -13,13 +13,13 @@ + #size-cells = <0>; + status = "okay"; + +- adv7282: adv7282@21 { ++ adv728x: adv728x@21 { + compatible = "adi,adv7282-m"; + reg = <0x21>; + status = "okay"; + clock-frequency = <24000000>; + port { +- adv7282_0: endpoint { ++ adv728x_0: endpoint { + remote-endpoint = <&csi1_ep>; + clock-lanes = <0>; + data-lanes = <1>; +@@ -43,7 +43,7 @@ + #address-cells = <1>; + #size-cells = <0>; + csi1_ep: endpoint { +- remote-endpoint = <&adv7282_0>; ++ remote-endpoint = <&adv728x_0>; + }; + }; + }; +@@ -71,6 +71,7 @@ + }; + + __overrides__ { +- i2c_pins_28_29 = <0>,"+2-3"; ++ i2c_pins_28_29 = <0>,"+2-3"; ++ addr = <&adv728x>,"reg:0"; + }; + }; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts +@@ -0,0 +1,37 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++// Definitions for Analog Devices ADV728[0|1|2]-M video to CSI2 bridges on VC ++// I2C bus ++ ++#include "adv7282m-overlay.dts" ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ // Fragment numbers deliberately high to avoid conflicts with the ++ // included adv7282m overlay file. ++ ++ fragment@101 { ++ target = <&adv728x>; ++ __dormant__ { ++ compatible = "adi,adv7280-m"; ++ }; ++ }; ++ fragment@102 { ++ target = <&adv728x>; ++ __dormant__ { ++ compatible = "adi,adv7281-m"; ++ }; ++ }; ++ fragment@103 { ++ target = <&adv728x>; ++ __dormant__ { ++ compatible = "adi,adv7281-ma"; ++ }; ++ }; ++ ++ __overrides__ { ++ adv7280m = <0>, "+101"; ++ adv7281m = <0>, "+102"; ++ adv7281ma = <0>, "+103"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0186-media-ov5647-Add-set_fmt-and-get_fmt-calls.patch b/target/linux/brcm2708/patches-4.19/950-0186-media-ov5647-Add-set_fmt-and-get_fmt-calls.patch deleted file mode 100644 index 2ae108d079..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0186-media-ov5647-Add-set_fmt-and-get_fmt-calls.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 5796bf25ff928fef204c7f53572f0fc5b8f79d45 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:55:37 +0000 -Subject: [PATCH 186/806] media: ov5647: Add set_fmt and get_fmt calls. - -There's no way to query the subdevice for the supported -resolutions. -Add set_fmt and get_fmt implementations. - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/ov5647.c | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/drivers/media/i2c/ov5647.c -+++ b/drivers/media/i2c/ov5647.c -@@ -463,8 +463,30 @@ static int ov5647_enum_mbus_code(struct - return 0; - } - -+static int ov5647_set_get_fmt(struct v4l2_subdev *sd, -+ struct v4l2_subdev_pad_config *cfg, -+ struct v4l2_subdev_format *format) -+{ -+ struct v4l2_mbus_framefmt *fmt = &format->format; -+ -+ if (format->pad != 0) -+ return -EINVAL; -+ -+ /* Only one format is supported, so return that */ -+ memset(fmt, 0, sizeof(*fmt)); -+ fmt->code = MEDIA_BUS_FMT_SBGGR8_1X8; -+ fmt->colorspace = V4L2_COLORSPACE_SRGB; -+ fmt->field = V4L2_FIELD_NONE; -+ fmt->width = 640; -+ fmt->height = 480; -+ -+ return 0; -+} -+ - static const struct v4l2_subdev_pad_ops ov5647_subdev_pad_ops = { - .enum_mbus_code = ov5647_enum_mbus_code, -+ .set_fmt = ov5647_set_get_fmt, -+ .get_fmt = ov5647_set_get_fmt, - }; - - static const struct v4l2_subdev_ops ov5647_subdev_ops = { diff --git a/target/linux/brcm2708/patches-4.19/950-0187-media-Documentation-DT-add-device-tree-for-PWDN-cont.patch b/target/linux/brcm2708/patches-4.19/950-0187-media-Documentation-DT-add-device-tree-for-PWDN-cont.patch deleted file mode 100644 index 09fc61157d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0187-media-Documentation-DT-add-device-tree-for-PWDN-cont.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 1c643cbdcfaa7e8b4a52bb8555cce60b48d822a2 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:55:59 +0000 -Subject: [PATCH 187/806] [media] Documentation: DT: add device tree for PWDN - control - -Add optional GPIO pwdn to connect to the PWDN line on the sensor. - -Signed-off-by: Dave Stevenson ---- - Documentation/devicetree/bindings/media/i2c/ov5647.txt | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/Documentation/devicetree/bindings/media/i2c/ov5647.txt -+++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt -@@ -10,6 +10,9 @@ Required properties: - - reg : I2C slave address of the sensor. - - clocks : Reference to the xclk clock. - -+Optional Properties: -+- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any. -+ - The common video interfaces bindings (see video-interfaces.txt) should be - used to specify link to the image data receiver. The OV5647 device - node should contain one 'port' child node with an 'endpoint' subnode. -@@ -26,6 +29,7 @@ Example: - compatible = "ovti,ov5647"; - reg = <0x36>; - clocks = <&camera_clk>; -+ pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; - port { - camera_1: endpoint { - remote-endpoint = <&csi1_ep1>; diff --git a/target/linux/brcm2708/patches-4.19/950-0187-vcsm-Fix-an-NULL-dereference-in-the-import_dmabuf-er.patch b/target/linux/brcm2708/patches-4.19/950-0187-vcsm-Fix-an-NULL-dereference-in-the-import_dmabuf-er.patch new file mode 100644 index 0000000000..8a71d944ea --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0187-vcsm-Fix-an-NULL-dereference-in-the-import_dmabuf-er.patch @@ -0,0 +1,25 @@ +From 654ca15f2234ce3677ed7c9eef5de588285b529a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 14 Nov 2018 11:54:46 +0000 +Subject: [PATCH] vcsm: Fix an NULL dereference in the import_dmabuf + error path + +resource was dereferenced even though it was NULL. + +Signed-off-by: Dave Stevenson +--- + drivers/char/broadcom/vc_sm/vmcs_sm.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/char/broadcom/vc_sm/vmcs_sm.c ++++ b/drivers/char/broadcom/vc_sm/vmcs_sm.c +@@ -2315,8 +2315,8 @@ int vc_sm_ioctl_import_dmabuf(struct sm_ + return 0; + + error: +- resource->res_stats[IMPORT_FAIL]++; + if (resource) { ++ resource->res_stats[IMPORT_FAIL]++; + vc_sm_resource_deceased(resource, 1); + kfree(resource); + } diff --git a/target/linux/brcm2708/patches-4.19/950-0188-Update-README-2750.patch b/target/linux/brcm2708/patches-4.19/950-0188-Update-README-2750.patch new file mode 100644 index 0000000000..cc9af044e0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0188-Update-README-2750.patch @@ -0,0 +1,26 @@ +From 5b4c913a00ac41766ba70104749aa1533a370996 Mon Sep 17 00:00:00 2001 +From: James Hughes +Date: Tue, 13 Nov 2018 16:51:21 +0000 +Subject: [PATCH] Update README (#2750) + +Small update to the DT blob docs to include the axiperf option. + +Signed-off-by: James Hughes +--- + arch/arm/boot/dts/overlays/README | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -89,6 +89,11 @@ Params: + audio Set to "on" to enable the onboard ALSA audio + interface (default "off") + ++ axiperf Set to "on" to enable the AXI bus performance ++ monitors. ++ See /sys/kernel/debug/raspberrypi_axi_monitor ++ for the results. ++ + eee Enable Energy Efficient Ethernet support for + compatible devices (default "on"). See also + "tx_lpi_timer". diff --git a/target/linux/brcm2708/patches-4.19/950-0188-media-ov5647-Add-support-for-PWDN-GPIO.patch b/target/linux/brcm2708/patches-4.19/950-0188-media-ov5647-Add-support-for-PWDN-GPIO.patch deleted file mode 100644 index e758221d02..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0188-media-ov5647-Add-support-for-PWDN-GPIO.patch +++ /dev/null @@ -1,92 +0,0 @@ -From f41fdda9ca98e675d7467cc352c678bbcdca2df1 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:56:33 +0000 -Subject: [PATCH 188/806] media: ov5647: Add support for PWDN GPIO. - -Add support for an optional GPIO connected to PWDN on the sensor. - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/ov5647.c | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/drivers/media/i2c/ov5647.c -+++ b/drivers/media/i2c/ov5647.c -@@ -21,6 +21,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -35,6 +36,13 @@ - - #define SENSOR_NAME "ov5647" - -+/* -+ * From the datasheet, "20ms after PWDN goes low or 20ms after RESETB goes -+ * high if reset is inserted after PWDN goes high, host can access sensor's -+ * SCCB to initialize sensor." -+ */ -+#define PWDN_ACTIVE_DELAY_MS 20 -+ - #define MIPI_CTRL00_CLOCK_LANE_GATE BIT(5) - #define MIPI_CTRL00_BUS_IDLE BIT(2) - #define MIPI_CTRL00_CLOCK_LANE_DISABLE BIT(0) -@@ -86,6 +94,7 @@ struct ov5647 { - unsigned int height; - int power_count; - struct clk *xclk; -+ struct gpio_desc *pwdn; - }; - - static inline struct ov5647 *to_state(struct v4l2_subdev *sd) -@@ -355,6 +364,11 @@ static int ov5647_sensor_power(struct v4 - if (on && !ov5647->power_count) { - dev_dbg(&client->dev, "OV5647 power on\n"); - -+ if (ov5647->pwdn) { -+ gpiod_set_value(ov5647->pwdn, 0); -+ msleep(PWDN_ACTIVE_DELAY_MS); -+ } -+ - ret = clk_prepare_enable(ov5647->xclk); - if (ret < 0) { - dev_err(&client->dev, "clk prepare enable failed\n"); -@@ -392,6 +406,8 @@ static int ov5647_sensor_power(struct v4 - dev_dbg(&client->dev, "soft stby failed\n"); - - clk_disable_unprepare(ov5647->xclk); -+ -+ gpiod_set_value(ov5647->pwdn, 1); - } - - /* Update the power count. */ -@@ -604,6 +620,10 @@ static int ov5647_probe(struct i2c_clien - return -EINVAL; - } - -+ /* Request the power down GPIO asserted */ -+ sensor->pwdn = devm_gpiod_get_optional(&client->dev, "pwdn", -+ GPIOD_OUT_HIGH); -+ - mutex_init(&sensor->lock); - - sd = &sensor->sd; -@@ -617,7 +637,15 @@ static int ov5647_probe(struct i2c_clien - if (ret < 0) - goto mutex_remove; - -+ if (sensor->pwdn) { -+ gpiod_set_value(sensor->pwdn, 0); -+ msleep(PWDN_ACTIVE_DELAY_MS); -+ } -+ - ret = ov5647_detect(sd); -+ -+ gpiod_set_value(sensor->pwdn, 1); -+ - if (ret < 0) - goto error; - diff --git a/target/linux/brcm2708/patches-4.19/950-0189-media-ov5647-Add-support-for-non-continuous-clock-mo.patch b/target/linux/brcm2708/patches-4.19/950-0189-media-ov5647-Add-support-for-non-continuous-clock-mo.patch deleted file mode 100644 index 082a161443..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0189-media-ov5647-Add-support-for-non-continuous-clock-mo.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 79bbd278272416aa61c29bda88e79f8f6dd35903 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:56:47 +0000 -Subject: [PATCH 189/806] media: ov5647: Add support for non-continuous clock - mode - -The driver was only supporting continuous clock mode -although this was not stated anywhere. -Non-continuous clock saves a small amount of power and -on some SoCs is easier to interface with. - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/ov5647.c | 17 ++++++++++++++--- - 1 file changed, 14 insertions(+), 3 deletions(-) - ---- a/drivers/media/i2c/ov5647.c -+++ b/drivers/media/i2c/ov5647.c -@@ -44,6 +44,7 @@ - #define PWDN_ACTIVE_DELAY_MS 20 - - #define MIPI_CTRL00_CLOCK_LANE_GATE BIT(5) -+#define MIPI_CTRL00_LINE_SYNC_ENABLE BIT(4) - #define MIPI_CTRL00_BUS_IDLE BIT(2) - #define MIPI_CTRL00_CLOCK_LANE_DISABLE BIT(0) - -@@ -95,6 +96,7 @@ struct ov5647 { - int power_count; - struct clk *xclk; - struct gpio_desc *pwdn; -+ unsigned int flags; - }; - - static inline struct ov5647 *to_state(struct v4l2_subdev *sd) -@@ -269,9 +271,15 @@ static int ov5647_set_virtual_channel(st - - static int ov5647_stream_on(struct v4l2_subdev *sd) - { -+ struct ov5647 *ov5647 = to_state(sd); -+ u8 val = MIPI_CTRL00_BUS_IDLE; - int ret; - -- ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, MIPI_CTRL00_BUS_IDLE); -+ if (ov5647->flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK) -+ val |= MIPI_CTRL00_CLOCK_LANE_GATE | -+ MIPI_CTRL00_LINE_SYNC_ENABLE; -+ -+ ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, val); - if (ret < 0) - return ret; - -@@ -568,7 +576,7 @@ static const struct v4l2_subdev_internal - .open = ov5647_open, - }; - --static int ov5647_parse_dt(struct device_node *np) -+static int ov5647_parse_dt(struct device_node *np, struct ov5647 *sensor) - { - struct v4l2_fwnode_endpoint bus_cfg; - struct device_node *ep; -@@ -581,6 +589,9 @@ static int ov5647_parse_dt(struct device - - ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg); - -+ if (!ret) -+ sensor->flags = bus_cfg.bus.mipi_csi2.flags; -+ - of_node_put(ep); - return ret; - } -@@ -600,7 +611,7 @@ static int ov5647_probe(struct i2c_clien - return -ENOMEM; - - if (IS_ENABLED(CONFIG_OF) && np) { -- ret = ov5647_parse_dt(np); -+ ret = ov5647_parse_dt(np, sensor); - if (ret) { - dev_err(dev, "DT parsing error: %d\n", ret); - return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0189-overlays-Remove-superfluous-address-size-cells.patch b/target/linux/brcm2708/patches-4.19/950-0189-overlays-Remove-superfluous-address-size-cells.patch new file mode 100644 index 0000000000..1a660d608b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0189-overlays-Remove-superfluous-address-size-cells.patch @@ -0,0 +1,63 @@ +From 1648c72369a617b27193534f28fd86a1bdabd7b3 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 14 Nov 2018 09:53:25 +0000 +Subject: [PATCH] overlays: Remove superfluous #address/size-cells + +Newer versions of dtc warn about unnecessary usage of #address-cells +and #size-cells, so remove them. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/adv7282m-overlay.dts | 4 ---- + arch/arm/boot/dts/overlays/ov5647-overlay.dts | 4 ---- + arch/arm/boot/dts/overlays/tc358743-overlay.dts | 4 ---- + 3 files changed, 12 deletions(-) + +--- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts +@@ -35,13 +35,9 @@ + fragment@1 { + target = <&csi1>; + __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; + status = "okay"; + + port { +- #address-cells = <1>; +- #size-cells = <0>; + csi1_ep: endpoint { + remote-endpoint = <&adv728x_0>; + }; +--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts +@@ -44,13 +44,9 @@ + fragment@1 { + target = <&csi1>; + __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; + status = "okay"; + + port { +- #address-cells = <1>; +- #size-cells = <0>; + csi1_ep: endpoint { + remote-endpoint = <&ov5647_0>; + }; +--- a/arch/arm/boot/dts/overlays/tc358743-overlay.dts ++++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts +@@ -43,13 +43,9 @@ + fragment@1 { + target = <&csi1>; + __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; + status = "okay"; + + port { +- #address-cells = <1>; +- #size-cells = <0>; + csi1_ep: endpoint { + remote-endpoint = <&tc358743>; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0190-Revert-ASoC-wm8804-MCLK-configuration-options-32-bit.patch b/target/linux/brcm2708/patches-4.19/950-0190-Revert-ASoC-wm8804-MCLK-configuration-options-32-bit.patch new file mode 100644 index 0000000000..583b95bf89 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0190-Revert-ASoC-wm8804-MCLK-configuration-options-32-bit.patch @@ -0,0 +1,29 @@ +From 7c62d38653565e900504f821586e1b1d47f25594 Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sun, 18 Nov 2018 13:21:26 +0100 +Subject: [PATCH] Revert "ASoC: wm8804: MCLK configuration options, + 32-bit" + +This reverts commit 3b12dcf797f5a4635aecd7f5c090dc507b124ffd. + +Despite the commit message being wrong idle_bias changes +were already reverted in the 4.14 tree. + +So drop the commit to bring the wm8804 driver back in line with +the rpi-4.14.y and upstream linux trees. + +Signed-off-by: Matthias Reichl +--- + sound/soc/codecs/wm8804.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/sound/soc/codecs/wm8804.c ++++ b/sound/soc/codecs/wm8804.c +@@ -550,7 +550,6 @@ static const struct snd_soc_component_dr + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +- .idle_bias_on = true, + }; + + const struct regmap_config wm8804_regmap_config = { diff --git a/target/linux/brcm2708/patches-4.19/950-0190-media-tc358743-Increase-FIFO-level-to-374.patch b/target/linux/brcm2708/patches-4.19/950-0190-media-tc358743-Increase-FIFO-level-to-374.patch deleted file mode 100644 index d7438ef492..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0190-media-tc358743-Increase-FIFO-level-to-374.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 4f1be827b5873b2aaa9003a2d38ba6b941ceb66d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:56:59 +0000 -Subject: [PATCH 190/806] media: tc358743: Increase FIFO level to 374. - -The existing fixed value of 16 worked for UYVY 720P60 over -2 lanes at 594MHz, or UYVY 1080P60 over 4 lanes. (RGB888 -1080P60 needs 6 lanes at 594MHz). -It doesn't allow for lower resolutions to work as the FIFO -underflows. - -374 is required for 1080P24-30 UYVY over 2 lanes @ 972Mbit/s, but ->374 means that the FIFO underflows on 1080P50 UYVY over 2 lanes -@ 972Mbit/s. - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/tc358743.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/media/i2c/tc358743.c -+++ b/drivers/media/i2c/tc358743.c -@@ -1946,7 +1946,7 @@ static int tc358743_probe_of(struct tc35 - state->pdata.ddc5v_delay = DDC5V_DELAY_100_MS; - state->pdata.enable_hdcp = false; - /* A FIFO level of 16 should be enough for 2-lane 720p60 at 594 MHz. */ -- state->pdata.fifo_level = 16; -+ state->pdata.fifo_level = 374; - /* - * The PLL input clock is obtained by dividing refclk by pll_prd. - * It must be between 6 MHz and 40 MHz, lower frequency is better. diff --git a/target/linux/brcm2708/patches-4.19/950-0191-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch b/target/linux/brcm2708/patches-4.19/950-0191-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch deleted file mode 100644 index 999ad5f41a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0191-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch +++ /dev/null @@ -1,95 +0,0 @@ -From f0a4354bf8d99532577a21bb99da792fe2691626 Mon Sep 17 00:00:00 2001 -From: Philipp Zabel -Date: Thu, 21 Sep 2017 17:30:24 +0200 -Subject: [PATCH 191/806] media: tc358743: fix connected/active CSI-2 lane - reporting - -g_mbus_config was supposed to indicate all supported lane numbers, not -only the number of those currently in active use. Since the TC358743 -can dynamically reduce the number of active lanes if the required -bandwidth allows for it, report all lane numbers up to the connected -number of lanes as supported in pdata mode. -In device tree mode, do not report lane count and clock mode at all, as -the receiver driver can determine these from the device tree. - -To allow communicating the number of currently active lanes, add a new -bitfield to the v4l2_mbus_config flags. This is a temporary fix, to be -used only until a better solution is found. - -Signed-off-by: Philipp Zabel ---- - drivers/media/i2c/tc358743.c | 30 ++++++++++++++++-------------- - include/media/v4l2-mediabus.h | 8 ++++++++ - 2 files changed, 24 insertions(+), 14 deletions(-) - ---- a/drivers/media/i2c/tc358743.c -+++ b/drivers/media/i2c/tc358743.c -@@ -1606,28 +1606,29 @@ static int tc358743_g_mbus_config(struct - struct v4l2_mbus_config *cfg) - { - struct tc358743_state *state = to_state(sd); -+ const u32 mask = V4L2_MBUS_CSI2_LANE_MASK; -+ -+ if (state->csi_lanes_in_use > state->bus.num_data_lanes) -+ return -EINVAL; - - cfg->type = V4L2_MBUS_CSI2; -+ cfg->flags = (state->csi_lanes_in_use << __ffs(mask)) & mask; -+ -+ /* In DT mode, only report the number of active lanes */ -+ if (sd->dev->of_node) -+ return 0; - -- /* Support for non-continuous CSI-2 clock is missing in the driver */ -- cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; -+ /* Support for non-continuous CSI-2 clock is missing in pdata mode */ -+ cfg->flags |= V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; - -- switch (state->csi_lanes_in_use) { -- case 1: -+ if (state->bus.num_data_lanes > 0) - cfg->flags |= V4L2_MBUS_CSI2_1_LANE; -- break; -- case 2: -+ if (state->bus.num_data_lanes > 1) - cfg->flags |= V4L2_MBUS_CSI2_2_LANE; -- break; -- case 3: -+ if (state->bus.num_data_lanes > 2) - cfg->flags |= V4L2_MBUS_CSI2_3_LANE; -- break; -- case 4: -+ if (state->bus.num_data_lanes > 3) - cfg->flags |= V4L2_MBUS_CSI2_4_LANE; -- break; -- default: -- return -EINVAL; -- } - - return 0; - } -@@ -2052,6 +2053,7 @@ static int tc358743_probe(struct i2c_cli - if (pdata) { - state->pdata = *pdata; - state->bus.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; -+ state->bus.num_data_lanes = 4; - } else { - err = tc358743_probe_of(state); - if (err == -ENODEV) ---- a/include/media/v4l2-mediabus.h -+++ b/include/media/v4l2-mediabus.h -@@ -67,6 +67,14 @@ - V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE) - #define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \ - V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3) -+/* -+ * Number of lanes in use, 0 == use all available lanes (default) -+ * -+ * This is a temporary fix for devices that need to reduce the number of active -+ * lanes for certain modes, until g_mbus_config() can be replaced with a better -+ * solution. -+ */ -+#define V4L2_MBUS_CSI2_LANE_MASK (0xf << 10) - - /** - * enum v4l2_mbus_type - media bus type diff --git a/target/linux/brcm2708/patches-4.19/950-0191-rpi-wm8804-soundcard-drop-PWRDN-register-writes.patch b/target/linux/brcm2708/patches-4.19/950-0191-rpi-wm8804-soundcard-drop-PWRDN-register-writes.patch new file mode 100644 index 0000000000..f73d9c9617 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0191-rpi-wm8804-soundcard-drop-PWRDN-register-writes.patch @@ -0,0 +1,128 @@ +From 31b533207610f0f703cfdcba3baf404d000f1363 Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sun, 18 Nov 2018 15:24:16 +0100 +Subject: [PATCH] rpi-wm8804-soundcard: drop PWRDN register writes + +Since kernel 4.0 the PWRDN register bits are under DAPM +control from the wm8804 driver. + +Drop code that modifies that register to avoid interfering +with DAPM. + +Signed-off-by: Matthias Reichl +--- + sound/soc/bcm/rpi-wm8804-soundcard.c | 55 ---------------------------- + 1 file changed, 55 deletions(-) + +--- a/sound/soc/bcm/rpi-wm8804-soundcard.c ++++ b/sound/soc/bcm/rpi-wm8804-soundcard.c +@@ -54,8 +54,6 @@ struct snd_rpi_wm8804_drvdata { + struct snd_soc_dai_link *dai; + /* Required - snd_soc_card name */ + const char *card_name; +- /* Optional- Overrides the module paramter */ +- unsigned short auto_shutdown_output; + /* Optional DT node names if card info is defined in DT */ + const char *card_name_dt; + const char *dai_name_dt; +@@ -64,51 +62,12 @@ struct snd_rpi_wm8804_drvdata { + int (*probe)(struct platform_device *pdev); + }; + +-static short int auto_shutdown_output; +-module_param(auto_shutdown_output, short, 0660); +-MODULE_PARM_DESC(auto_shutdown_output, "Shutdown SP/DIF output if playback is stopped"); +- + static struct gpio_desc *snd_clk44gpio; + static struct gpio_desc *snd_clk48gpio; + + #define CLK_44EN_RATE 22579200UL + #define CLK_48EN_RATE 24576000UL + +-static int snd_rpi_wm8804_init(struct snd_soc_pcm_runtime *rtd) +-{ +- struct snd_soc_component *component = rtd->codec_dai->component; +- int rc; +- +- pr_debug("%s\n", __func__); +- +- rc = snd_soc_component_update_bits(component, WM8804_PWRDN, 0x4, 0x0); +- return rc < 0 ? rc : 0; +-} +- +-static int snd_rpi_wm8804_digi_startup(struct snd_pcm_substream *substream) +-{ +- struct snd_soc_pcm_runtime *rtd = substream->private_data; +- struct snd_soc_component *component = rtd->codec_dai->component; +- int rc; +- +- pr_debug("%s\n", __func__); +- +- rc = snd_soc_component_update_bits(component, WM8804_PWRDN, 0x3c, 0x00); +- return rc < 0 ? rc : 0; +-} +- +-static void snd_rpi_wm8804_digi_shutdown(struct snd_pcm_substream *substream) +-{ +- struct snd_soc_pcm_runtime *rtd = substream->private_data; +- struct snd_soc_component *component = rtd->codec_dai->component; +- +- pr_debug("%s %d\n", __func__, auto_shutdown_output); +- +- if (auto_shutdown_output) +- snd_soc_component_update_bits(component, WM8804_PWRDN, +- 0x3c, 0x3c); +-} +- + static unsigned int snd_rpi_wm8804_enable_clock(unsigned int samplerate) + { + switch (samplerate) { +@@ -204,12 +163,6 @@ static int snd_rpi_wm8804_hw_params(stru + return ret; + } + +- /* Enable TX output */ +- snd_soc_component_update_bits(component, WM8804_PWRDN, 0x4, 0x0); +- +- /* Power on */ +- snd_soc_component_update_bits(component, WM8804_PWRDN, 0x9, 0); +- + /* set sampling frequency status bits */ + snd_soc_component_update_bits(component, WM8804_SPDTX4, 0x0f, + sampling_freq); +@@ -219,8 +172,6 @@ static int snd_rpi_wm8804_hw_params(stru + + static struct snd_soc_ops snd_rpi_wm8804_ops = { + .hw_params = snd_rpi_wm8804_hw_params, +- .startup = snd_rpi_wm8804_digi_startup, +- .shutdown = snd_rpi_wm8804_digi_shutdown, + }; + + static struct snd_soc_dai_link snd_justboom_digi_dai[] = { +@@ -233,7 +184,6 @@ static struct snd_soc_dai_link snd_justb + static struct snd_rpi_wm8804_drvdata drvdata_justboom_digi = { + .card_name = "snd_rpi_justboom_digi", + .dai = snd_justboom_digi_dai, +- .auto_shutdown_output = 1, + }; + + static struct snd_soc_dai_link snd_iqaudio_digi_dai[] = { +@@ -335,8 +285,6 @@ static int snd_rpi_wm8804_probe(struct p + + snd_soc_card_set_drvdata(&snd_rpi_wm8804, drvdata); + +- if (!dai->init) +- dai->init = snd_rpi_wm8804_init; + if (!dai->ops) + dai->ops = &snd_rpi_wm8804_ops; + if (!dai->codec_dai_name) +@@ -348,9 +296,6 @@ static int snd_rpi_wm8804_probe(struct p + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM; + +- if (drvdata->auto_shutdown_output) +- auto_shutdown_output = 1; +- + snd_rpi_wm8804.dai_link = dai; + i2s_node = of_parse_phandle(pdev->dev.of_node, + "i2s-controller", 0); diff --git a/target/linux/brcm2708/patches-4.19/950-0192-media-tc358743-Add-support-for-972Mbit-s-link-freq.patch b/target/linux/brcm2708/patches-4.19/950-0192-media-tc358743-Add-support-for-972Mbit-s-link-freq.patch deleted file mode 100644 index 451be8ec5d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0192-media-tc358743-Add-support-for-972Mbit-s-link-freq.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 745b0fc9c914437695c6098daecd311b2cd88204 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:57:21 +0000 -Subject: [PATCH 192/806] media: tc358743: Add support for 972Mbit/s link freq. - -Adds register setups for running the CSI lanes at 972Mbit/s, -which allows 1080P50 UYVY down 2 lanes. - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/tc358743.c | 47 +++++++++++++++++++++++++----------- - 1 file changed, 33 insertions(+), 14 deletions(-) - ---- a/drivers/media/i2c/tc358743.c -+++ b/drivers/media/i2c/tc358743.c -@@ -1967,6 +1967,7 @@ static int tc358743_probe_of(struct tc35 - /* - * The CSI bps per lane must be between 62.5 Mbps and 1 Gbps. - * The default is 594 Mbps for 4-lane 1080p60 or 2-lane 720p60. -+ * 972 Mbps allows 1080P50 UYVY over 2-lane. - */ - bps_pr_lane = 2 * endpoint->link_frequencies[0]; - if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) { -@@ -1979,23 +1980,41 @@ static int tc358743_probe_of(struct tc35 - state->pdata.refclk_hz * state->pdata.pll_prd; - - /* -- * FIXME: These timings are from REF_02 for 594 Mbps per lane (297 MHz -- * link frequency). In principle it should be possible to calculate -+ * FIXME: These timings are from REF_02 for 594 or 972 Mbps per lane -+ * (297 MHz or 486 MHz link frequency). -+ * In principle it should be possible to calculate - * them based on link frequency and resolution. - */ -- if (bps_pr_lane != 594000000U) -+ switch (bps_pr_lane) { -+ default: - dev_warn(dev, "untested bps per lane: %u bps\n", bps_pr_lane); -- state->pdata.lineinitcnt = 0xe80; -- state->pdata.lptxtimecnt = 0x003; -- /* tclk-preparecnt: 3, tclk-zerocnt: 20 */ -- state->pdata.tclk_headercnt = 0x1403; -- state->pdata.tclk_trailcnt = 0x00; -- /* ths-preparecnt: 3, ths-zerocnt: 1 */ -- state->pdata.ths_headercnt = 0x0103; -- state->pdata.twakeup = 0x4882; -- state->pdata.tclk_postcnt = 0x008; -- state->pdata.ths_trailcnt = 0x2; -- state->pdata.hstxvregcnt = 0; -+ case 594000000U: -+ state->pdata.lineinitcnt = 0xe80; -+ state->pdata.lptxtimecnt = 0x003; -+ /* tclk-preparecnt: 3, tclk-zerocnt: 20 */ -+ state->pdata.tclk_headercnt = 0x1403; -+ state->pdata.tclk_trailcnt = 0x00; -+ /* ths-preparecnt: 3, ths-zerocnt: 1 */ -+ state->pdata.ths_headercnt = 0x0103; -+ state->pdata.twakeup = 0x4882; -+ state->pdata.tclk_postcnt = 0x008; -+ state->pdata.ths_trailcnt = 0x2; -+ state->pdata.hstxvregcnt = 0; -+ break; -+ case 972000000U: -+ state->pdata.lineinitcnt = 0x1b58; -+ state->pdata.lptxtimecnt = 0x007; -+ /* tclk-preparecnt: 6, tclk-zerocnt: 40 */ -+ state->pdata.tclk_headercnt = 0x2806; -+ state->pdata.tclk_trailcnt = 0x00; -+ /* ths-preparecnt: 6, ths-zerocnt: 8 */ -+ state->pdata.ths_headercnt = 0x0806; -+ state->pdata.twakeup = 0x4268; -+ state->pdata.tclk_postcnt = 0x008; -+ state->pdata.ths_trailcnt = 0x5; -+ state->pdata.hstxvregcnt = 0; -+ break; -+ } - - state->reset_gpio = devm_gpiod_get_optional(dev, "reset", - GPIOD_OUT_LOW); diff --git a/target/linux/brcm2708/patches-4.19/950-0192-rpi-wm8804-soundcard-configure-wm8804-clocks-only-on.patch b/target/linux/brcm2708/patches-4.19/950-0192-rpi-wm8804-soundcard-configure-wm8804-clocks-only-on.patch new file mode 100644 index 0000000000..7edd25f9eb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0192-rpi-wm8804-soundcard-configure-wm8804-clocks-only-on.patch @@ -0,0 +1,46 @@ +From f6b133a056e8fde7f4707e2874e204c7d5d671a2 Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sun, 18 Nov 2018 15:32:28 +0100 +Subject: [PATCH] rpi-wm8804-soundcard: configure wm8804 clocks only on + rate change + +This should avoid clicks when stopping and immediately afterwards +starting a stream with the same samplerate as before. + +Signed-off-by: Matthias Reichl +--- + sound/soc/bcm/rpi-wm8804-soundcard.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/sound/soc/bcm/rpi-wm8804-soundcard.c ++++ b/sound/soc/bcm/rpi-wm8804-soundcard.c +@@ -64,6 +64,7 @@ struct snd_rpi_wm8804_drvdata { + + static struct gpio_desc *snd_clk44gpio; + static struct gpio_desc *snd_clk48gpio; ++static int wm8804_samplerate = 0; + + #define CLK_44EN_RATE 22579200UL + #define CLK_48EN_RATE 24576000UL +@@ -117,6 +118,12 @@ static int snd_rpi_wm8804_hw_params(stru + struct wm8804_clk_cfg clk_cfg; + int samplerate = params_rate(params); + ++ if (samplerate == wm8804_samplerate) ++ return 0; ++ ++ /* clear until all clocks are setup properly */ ++ wm8804_samplerate = 0; ++ + snd_rpi_wm8804_clk_cfg(samplerate, &clk_cfg); + + pr_debug("%s samplerate: %d mclk_freq: %u mclk_div: %u sysclk: %u\n", +@@ -163,6 +170,8 @@ static int snd_rpi_wm8804_hw_params(stru + return ret; + } + ++ wm8804_samplerate = samplerate; ++ + /* set sampling frequency status bits */ + snd_soc_component_update_bits(component, WM8804_SPDTX4, 0x0f, + sampling_freq); diff --git a/target/linux/brcm2708/patches-4.19/950-0193-dtoverlays-Add-i2c-on-0-1-option-to-TC358743-ADV7282.patch b/target/linux/brcm2708/patches-4.19/950-0193-dtoverlays-Add-i2c-on-0-1-option-to-TC358743-ADV7282.patch new file mode 100644 index 0000000000..cb89142dff --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0193-dtoverlays-Add-i2c-on-0-1-option-to-TC358743-ADV7282.patch @@ -0,0 +1,142 @@ +From 83b839b8b3a599336c2d48ab22ed919a77666476 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 26 Nov 2018 17:02:15 +0000 +Subject: [PATCH] dtoverlays: Add i2c on 0&1 option to TC358743, + ADV7282 and OV5647 + +Adds the option of configuring i2c0 to be on GPIOs 0&1 as +this is of use on the Compute Module. + +Also fixes the ov5647 overlay where the override enabled the wrong +fragments. + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/overlays/README | 14 ++++++++++++-- + arch/arm/boot/dts/overlays/adv7282m-overlay.dts | 10 +++++++++- + arch/arm/boot/dts/overlays/ov5647-overlay.dts | 10 +++++++++- + arch/arm/boot/dts/overlays/tc358743-overlay.dts | 10 +++++++++- + 4 files changed, 39 insertions(+), 5 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -277,7 +277,9 @@ Info: Analog Devices ADV7282M analogue + Uses Unicam1, which is the standard camera connector on most Pi + variants. + Load: dtoverlay=adv7282m,= +-Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. ++Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. ++ Useful on Compute Modules. ++ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. + This is required for Pi B+, 2, 0, and 0W. + addr Overrides the I2C address (default 0x21) + +@@ -286,7 +288,9 @@ Name: adv728x-m + Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. + This is a wrapper for adv7282m, and defaults to ADV7282M. + Load: dtoverlay=adv728x-m,= +-Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. ++Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. ++ Useful on Compute Modules. ++ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. + This is required for Pi B+, 2, 0, and 0W. + addr Overrides the I2C address (default 0x21) + adv7280m Select ADV7280-M. +@@ -1324,6 +1328,9 @@ Params: cam0-pwdn GPIO use + configuration of the particular Pi variant in + use. + ++ i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. ++ Useful on Compute Modules. ++ + i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. + This is required for Pi B+, 2, 0, and 0W. + +@@ -1949,6 +1956,9 @@ Params: 4lane Use 4 la + (574Mbit/s) and 486000000 (972Mbit/s - default) + are supported by the driver. + ++ i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. ++ Useful on Compute Modules. ++ + i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. + This is required for Pi B+, 2, 0, and 0W. + +--- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts +@@ -60,6 +60,13 @@ + }; + }; + fragment@4 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ fragment@5 { + target = <&i2c_vc>; + __overlay__ { + status = "okay"; +@@ -67,7 +74,8 @@ + }; + + __overrides__ { +- i2c_pins_28_29 = <0>,"+2-3"; ++ i2c_pins_0_1 = <0>,"-2-3+4"; ++ i2c_pins_28_29 = <0>,"+2-3-4"; + addr = <&adv728x>,"reg:0"; + }; + }; +--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts +@@ -69,6 +69,13 @@ + }; + }; + fragment@4 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ fragment@5 { + target = <&i2c_vc>; + __overlay__ { + status = "okay"; +@@ -76,7 +83,8 @@ + }; + + __overrides__ { +- i2c_pins_28_29 = <0>,"+4-5"; ++ i2c_pins_0_1 = <0>,"-2-3+4"; ++ i2c_pins_28_29 = <0>,"+2-3-4"; + cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; + cam0-led = <&ov5647>,"pwdn-gpios:16"; + }; +--- a/arch/arm/boot/dts/overlays/tc358743-overlay.dts ++++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts +@@ -94,6 +94,13 @@ + }; + }; + fragment@6 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ fragment@7 { + target = <&i2c_vc>; + __overlay__ { + status = "okay"; +@@ -101,7 +108,8 @@ + }; + + __overrides__ { +- i2c_pins_28_29 = <0>,"+4-5"; ++ i2c_pins_0_1 = <0>,"-4-5+6"; ++ i2c_pins_28_29 = <0>,"+4-5-6"; + 4lane = <0>, "-2+3"; + link-frequency = <&tc358743>,"link-frequencies#0"; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0193-media-tc358743-Check-I2C-succeeded-during-probe.patch b/target/linux/brcm2708/patches-4.19/950-0193-media-tc358743-Check-I2C-succeeded-during-probe.patch deleted file mode 100644 index 4df51feb64..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0193-media-tc358743-Check-I2C-succeeded-during-probe.patch +++ /dev/null @@ -1,98 +0,0 @@ -From 6e089b7c2526037b0eaf9ecaed4d38957f33c19c Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:57:34 +0000 -Subject: [PATCH 193/806] media: tc358743: Check I2C succeeded during probe. - -The probe for the TC358743 reads the CHIPID register from -the device and compares it to the expected value of 0. -If the I2C request fails then that also returns 0, so -the driver loads thinking that the device is there. - -Generally I2C communications are reliable so there is -limited need to check the return value on every transfer, -therefore only amend the one read during probe to check -for I2C errors. - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/tc358743.c | 27 +++++++++++++++++++++++---- - 1 file changed, 23 insertions(+), 4 deletions(-) - ---- a/drivers/media/i2c/tc358743.c -+++ b/drivers/media/i2c/tc358743.c -@@ -110,7 +110,7 @@ static inline struct tc358743_state *to_ - - /* --------------- I2C --------------- */ - --static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) -+static int i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) - { - struct tc358743_state *state = to_state(sd); - struct i2c_client *client = state->i2c_client; -@@ -136,6 +136,7 @@ static void i2c_rd(struct v4l2_subdev *s - v4l2_err(sd, "%s: reading register 0x%x from 0x%x failed\n", - __func__, reg, client->addr); - } -+ return err != ARRAY_SIZE(msgs); - } - - static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) -@@ -192,15 +193,24 @@ static void i2c_wr(struct v4l2_subdev *s - } - } - --static noinline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n) -+static noinline u32 i2c_rdreg_err(struct v4l2_subdev *sd, u16 reg, u32 n, -+ int *err) - { -+ int error; - __le32 val = 0; - -- i2c_rd(sd, reg, (u8 __force *)&val, n); -+ error = i2c_rd(sd, reg, (u8 __force *)&val, n); -+ if (err) -+ *err = error; - - return le32_to_cpu(val); - } - -+static inline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n) -+{ -+ return i2c_rdreg_err(sd, reg, n, NULL); -+} -+ - static noinline void i2c_wrreg(struct v4l2_subdev *sd, u16 reg, u32 val, u32 n) - { - __le32 raw = cpu_to_le32(val); -@@ -229,6 +239,13 @@ static u16 i2c_rd16(struct v4l2_subdev * - return i2c_rdreg(sd, reg, 2); - } - -+static int i2c_rd16_err(struct v4l2_subdev *sd, u16 reg, u16 *value) -+{ -+ int err; -+ *value = i2c_rdreg_err(sd, reg, 2, &err); -+ return err; -+} -+ - static void i2c_wr16(struct v4l2_subdev *sd, u16 reg, u16 val) - { - i2c_wrreg(sd, reg, val, 2); -@@ -2054,6 +2071,7 @@ static int tc358743_probe(struct i2c_cli - struct tc358743_platform_data *pdata = client->dev.platform_data; - struct v4l2_subdev *sd; - u16 irq_mask = MASK_HDMI_MSK | MASK_CSI_MSK; -+ u16 chipid; - int err; - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) -@@ -2086,7 +2104,8 @@ static int tc358743_probe(struct i2c_cli - sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; - - /* i2c access */ -- if ((i2c_rd16(sd, CHIPID) & MASK_CHIPID) != 0) { -+ if (i2c_rd16_err(sd, CHIPID, &chipid) || -+ (chipid & MASK_CHIPID) != 0) { - v4l2_info(sd, "not a TC358743 on address 0x%x\n", - client->addr << 1); - return -ENODEV; diff --git a/target/linux/brcm2708/patches-4.19/950-0194-media-adv7180-Default-to-the-first-valid-input.patch b/target/linux/brcm2708/patches-4.19/950-0194-media-adv7180-Default-to-the-first-valid-input.patch deleted file mode 100644 index 332fc77e82..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0194-media-adv7180-Default-to-the-first-valid-input.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 1d6cba1999607bc911ee8d16323914058b06e8d8 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:57:46 +0000 -Subject: [PATCH 194/806] media: adv7180: Default to the first valid input - -The hardware default is differential CVBS on AIN1 & 2, which -isn't very useful. - -Select the first input that is defined as valid for the -chip variant (typically CVBS_AIN1). - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/adv7180.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/drivers/media/i2c/adv7180.c -+++ b/drivers/media/i2c/adv7180.c -@@ -1240,6 +1240,7 @@ static const struct adv7180_chip_info ad - static int init_device(struct adv7180_state *state) - { - int ret; -+ int i; - - mutex_lock(&state->mutex); - -@@ -1286,6 +1287,18 @@ static int init_device(struct adv7180_st - goto out_unlock; - } - -+ /* Select first valid input */ -+ for (i = 0; i < 32; i++) { -+ if (BIT(i) & state->chip_info->valid_input_mask) { -+ ret = state->chip_info->select_input(state, i); -+ -+ if (ret == 0) { -+ state->input = i; -+ break; -+ } -+ } -+ } -+ - out_unlock: - mutex_unlock(&state->mutex); - diff --git a/target/linux/brcm2708/patches-4.19/950-0194-overlays-Update-upstream-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0194-overlays-Update-upstream-overlay.patch new file mode 100644 index 0000000000..f7749ed553 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0194-overlays-Update-upstream-overlay.patch @@ -0,0 +1,53 @@ +From e62fed2c6b825e4b9d688dab7b7603fc95bb49cb Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 26 Nov 2018 20:15:16 +0000 +Subject: [PATCH] overlays: Update upstream overlay + +The vc4-kms-v3d overlay gained an extra fragment enabling the txp node, +so rebuild the upstream overlay to match. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/upstream-overlay.dts | 12 +++++++++--- + 1 file changed, 9 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/overlays/upstream-overlay.dts ++++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts +@@ -116,6 +116,12 @@ + }; + }; + fragment@17 { ++ target = <&txp>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ fragment@18 { + target = <&usb>; + #address-cells = <1>; + #size-cells = <1>; +@@ -130,21 +136,21 @@ + status = "okay"; + }; + }; +- fragment@18 { ++ fragment@19 { + target = <&uart1>; + __overlay__ { + interrupt-parent = <&intc>; + interrupts = <0x1 0x1d>; + }; + }; +- fragment@19 { ++ fragment@20 { + target = <&spi1>; + __overlay__ { + interrupt-parent = <&intc>; + interrupts = <0x1 0x1d>; + }; + }; +- fragment@20 { ++ fragment@21 { + target = <&spi2>; + __overlay__ { + interrupt-parent = <&intc>; diff --git a/target/linux/brcm2708/patches-4.19/950-0195-BCM2708_DT-update-firmware-node-binding.patch b/target/linux/brcm2708/patches-4.19/950-0195-BCM2708_DT-update-firmware-node-binding.patch new file mode 100644 index 0000000000..b55e89f492 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0195-BCM2708_DT-update-firmware-node-binding.patch @@ -0,0 +1,27 @@ +From e07c078b68e1776fa10818a1586c23a98a21ebdd Mon Sep 17 00:00:00 2001 +From: Nicolas Saenz Julienne +Date: Wed, 28 Nov 2018 10:36:01 +0100 +Subject: [PATCH] BCM2708_DT: update firmware node binding + +The upstreamed version of the firmware node has been updated to present +it as a "simple-bus". We need to get this in order to accomodate other +device bindings, namely RPi's firmware based gpio expander. + +Signed-off-by: Nicolas Saenz Julienne +--- + arch/arm/boot/dts/bcm2708-rpi.dtsi | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -50,7 +50,9 @@ + }; + + firmware: firmware { +- compatible = "raspberrypi,bcm2835-firmware"; ++ compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; ++ #address-cells = <0>; ++ #size-cells = <0>; + mboxes = <&mailbox>; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0195-media-adv7180-Add-YPrPb-support-for-ADV7282M.patch b/target/linux/brcm2708/patches-4.19/950-0195-media-adv7180-Add-YPrPb-support-for-ADV7282M.patch deleted file mode 100644 index 563eb7ab11..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0195-media-adv7180-Add-YPrPb-support-for-ADV7282M.patch +++ /dev/null @@ -1,24 +0,0 @@ -From b8a3ce970a70543aadd4b49a102b5cdaf2a62ed7 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:57:56 +0000 -Subject: [PATCH 195/806] media: adv7180: Add YPrPb support for ADV7282M - -The ADV7282M can support YPbPr on AIN1-3, but this was -not selectable from the driver. Add it to the list of -supported input modes. - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/adv7180.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/media/i2c/adv7180.c -+++ b/drivers/media/i2c/adv7180.c -@@ -1229,6 +1229,7 @@ static const struct adv7180_chip_info ad - BIT(ADV7182_INPUT_SVIDEO_AIN1_AIN2) | - BIT(ADV7182_INPUT_SVIDEO_AIN3_AIN4) | - BIT(ADV7182_INPUT_SVIDEO_AIN7_AIN8) | -+ BIT(ADV7182_INPUT_YPRPB_AIN1_AIN2_AIN3) | - BIT(ADV7182_INPUT_DIFF_CVBS_AIN1_AIN2) | - BIT(ADV7182_INPUT_DIFF_CVBS_AIN3_AIN4) | - BIT(ADV7182_INPUT_DIFF_CVBS_AIN7_AIN8), diff --git a/target/linux/brcm2708/patches-4.19/950-0196-BCM2710_DT-fix-gpio-expander-bindings.patch b/target/linux/brcm2708/patches-4.19/950-0196-BCM2710_DT-fix-gpio-expander-bindings.patch new file mode 100644 index 0000000000..53d055893d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0196-BCM2710_DT-fix-gpio-expander-bindings.patch @@ -0,0 +1,67 @@ +From d5a4fa7ba39e4f9e41271023e1be417204b8a2b7 Mon Sep 17 00:00:00 2001 +From: Nicolas Saenz Julienne +Date: Tue, 27 Nov 2018 16:59:10 +0100 +Subject: [PATCH] BCM2710_DT: fix gpio expander bindings + +The upstreamed driver for the GPIO expander expects to be a children of +the "firmware" node. + +The patch also removes the "firmware" phandle as it's useless. + +Signed-off-by: Nicolas Saenz Julienne +--- + arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 3 +-- + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 4 +++- + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 4 +++- + 3 files changed, 7 insertions(+), 4 deletions(-) + +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts +@@ -83,12 +83,11 @@ + brcm,overclock-50 = <0>; + }; + +-&soc { ++&firmware { + expgpio: expgpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; +- firmware = <&firmware>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -92,11 +92,13 @@ + status = "okay"; + }; + ++}; ++ ++&firmware { + expgpio: expgpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; +- firmware = <&firmware>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -53,11 +53,13 @@ + status = "okay"; + }; + ++}; ++ ++&firmware { + expgpio: expgpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; +- firmware = <&firmware>; + status = "okay"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0196-media-videodev2-Add-helper-defines-for-printing-FOUR.patch b/target/linux/brcm2708/patches-4.19/950-0196-media-videodev2-Add-helper-defines-for-printing-FOUR.patch deleted file mode 100644 index 2ff08e7556..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0196-media-videodev2-Add-helper-defines-for-printing-FOUR.patch +++ /dev/null @@ -1,28 +0,0 @@ -From a7b5d64ec5cb63b6cf5f3eb8fd3bfa22f86d36c4 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:58:08 +0000 -Subject: [PATCH 196/806] media: videodev2: Add helper defines for printing - FOURCCs - -New helper defines that allow printing of a FOURCC using -printf(V4L2_FOURCC_CONV, V4L2_FOURCC_CONV_ARGS(fourcc)); - -Signed-off-by: Dave Stevenson ---- - include/uapi/linux/videodev2.h | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/include/uapi/linux/videodev2.h -+++ b/include/uapi/linux/videodev2.h -@@ -82,6 +82,11 @@ - ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24)) - #define v4l2_fourcc_be(a, b, c, d) (v4l2_fourcc(a, b, c, d) | (1 << 31)) - -+#define V4L2_FOURCC_CONV "%c%c%c%c%s" -+#define V4L2_FOURCC_CONV_ARGS(fourcc) \ -+ (fourcc) & 0x7f, ((fourcc) >> 8) & 0x7f, ((fourcc) >> 16) & 0x7f, \ -+ ((fourcc) >> 24) & 0x7f, (fourcc) & BIT(31) ? "-BE" : "" -+ - /* - * E N U M S - */ diff --git a/target/linux/brcm2708/patches-4.19/950-0197-ARM-dts-bcm283x-The-lan7515-PHY-node-has-moved.patch b/target/linux/brcm2708/patches-4.19/950-0197-ARM-dts-bcm283x-The-lan7515-PHY-node-has-moved.patch new file mode 100644 index 0000000000..63f3911434 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0197-ARM-dts-bcm283x-The-lan7515-PHY-node-has-moved.patch @@ -0,0 +1,64 @@ +From eb6864f9dc059e86d057822b493feb8b4a9684ba Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 27 Nov 2018 16:33:31 +0000 +Subject: [PATCH] ARM: dts: bcm283x: The lan7515 PHY node has moved + +The DT node describing the LAN7800s PHY has now moved inside an "mdio" +node. Update the DT declarations accordingly. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 31 ++++++++++++++-------- + 1 file changed, 20 insertions(+), 11 deletions(-) + +--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi ++++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi +@@ -1,4 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0 ++#include ++ + / { + aliases { + ethernet0 = ðernet; +@@ -21,13 +23,20 @@ + ethernet: ethernet@1 { + compatible = "usb424,7800"; + reg = <1>; +- microchip,eee-enabled; +- microchip,tx-lpi-timer = <600>; /* non-aggressive*/ +- /* +- * led0 = 1:link1000/activity +- * led1 = 6:link10/100/activity +- */ +- microchip,led-modes = <1 6>; ++ ++ mdio { ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ eth_phy: ethernet-phy@1 { ++ reg = <1>; ++ microchip,eee-enabled; ++ microchip,tx-lpi-timer = <600>; /* non-aggressive*/ ++ microchip,led-modes = < ++ LAN78XX_LINK_1000_ACTIVITY ++ LAN78XX_LINK_10_100_ACTIVITY ++ >; ++ }; ++ }; + }; + }; + }; +@@ -36,9 +45,9 @@ + + / { + __overrides__ { +- eee = <ðernet>,"microchip,eee-enabled?"; +- tx_lpi_timer = <ðernet>,"microchip,tx-lpi-timer:0"; +- eth_led0 = <ðernet>,"microchip,led-modes:0"; +- eth_led1 = <ðernet>,"microchip,led-modes:4"; ++ eee = <ð_phy>,"microchip,eee-enabled?"; ++ tx_lpi_timer = <ð_phy>,"microchip,tx-lpi-timer:0"; ++ eth_led0 = <ð_phy>,"microchip,led-modes:0"; ++ eth_led1 = <ð_phy>,"microchip,led-modes:4"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch b/target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch deleted file mode 100644 index 63d3b3dce9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch +++ /dev/null @@ -1,103 +0,0 @@ -From 8299df54f2016290eed7a2bece3885aad36d13e2 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:59:06 +0000 -Subject: [PATCH 197/806] dt-bindings: Document BCM283x CSI2/CCP2 receiver - -Document the DT bindings for the CSI2/CCP2 receiver peripheral -(known as Unicam) on BCM283x SoCs. - -Signed-off-by: Dave Stevenson -Acked-by: Rob Herring ---- - .../bindings/media/bcm2835-unicam.txt | 85 +++++++++++++++++++ - 1 file changed, 85 insertions(+) - create mode 100644 Documentation/devicetree/bindings/media/bcm2835-unicam.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/media/bcm2835-unicam.txt -@@ -0,0 +1,85 @@ -+Broadcom BCM283x Camera Interface (Unicam) -+------------------------------------------ -+ -+The Unicam block on BCM283x SoCs is the receiver for either -+CSI-2 or CCP2 data from image sensors or similar devices. -+ -+The main platform using this SoC is the Raspberry Pi family of boards. -+On the Pi the VideoCore firmware can also control this hardware block, -+and driving it from two different processors will cause issues. -+To avoid this, the firmware checks the device tree configuration -+during boot. If it finds device tree nodes called csi0 or csi1 then -+it will stop the firmware accessing the block, and it can then -+safely be used via the device tree binding. -+ -+Required properties: -+=================== -+- compatible : must be "brcm,bcm2835-unicam". -+- reg : physical base address and length of the register sets for the -+ device. -+- interrupts : should contain the IRQ line for this Unicam instance. -+- clocks : list of clock specifiers, corresponding to entries in -+ clock-names property. -+- clock-names : must contain an "lp" entry, matching entries in the -+ clocks property. -+ -+Unicam supports a single port node. It should contain one 'port' child node -+with child 'endpoint' node. Please refer to the bindings defined in -+Documentation/devicetree/bindings/media/video-interfaces.txt. -+ -+Within the endpoint node the "remote-endpoint" and "data-lanes" properties -+are mandatory. -+Data lane reordering is not supported so the data lanes must be in order, -+starting at 1. The number of data lanes should represent the number of -+usable lanes for the hardware block. That may be limited by either the SoC or -+how the platform presents the interface, and the lower value must be used. -+ -+Lane reordering is not supported on the clock lane either, so the optional -+property "clock-lane" will implicitly be <0>. -+Similarly lane inversion is not supported, therefore "lane-polarities" will -+implicitly be <0 0 0 0 0>. -+Neither of these values will be checked. -+ -+Example: -+ csi1: csi1@7e801000 { -+ compatible = "brcm,bcm2835-unicam"; -+ reg = <0x7e801000 0x800>, -+ <0x7e802004 0x4>; -+ interrupts = <2 7>; -+ clocks = <&clocks BCM2835_CLOCK_CAM1>; -+ clock-names = "lp"; -+ -+ port { -+ csi1_ep: endpoint { -+ remote-endpoint = <&tc358743_0>; -+ data-lanes = <1 2>; -+ }; -+ }; -+ }; -+ -+ i2c0: i2c@7e205000 { -+ tc358743: csi-hdmi-bridge@0f { -+ compatible = "toshiba,tc358743"; -+ reg = <0x0f>; -+ -+ clocks = <&tc358743_clk>; -+ clock-names = "refclk"; -+ -+ tc358743_clk: bridge-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <27000000>; -+ }; -+ -+ port { -+ tc358743_0: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ clock-noncontinuous; -+ link-frequencies = -+ /bits/ 64 <297000000>; -+ }; -+ }; -+ }; -+ }; diff --git a/target/linux/brcm2708/patches-4.19/950-0198-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch b/target/linux/brcm2708/patches-4.19/950-0198-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch deleted file mode 100644 index 31ede702b7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0198-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch +++ /dev/null @@ -1,2437 +0,0 @@ -From 7b7027a39b981e3d72a5876274e857615d5149e1 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 14:59:22 +0000 -Subject: [PATCH 198/806] media: bcm2835-unicam: Driver for CCP2/CSI2 camera - interface - -Add driver for the Unicam camera receiver block on -BCM283x processors. - -Signed-off-by: Dave Stevenson ---- - drivers/media/platform/Kconfig | 1 + - drivers/media/platform/Makefile | 2 + - drivers/media/platform/bcm2835/Kconfig | 14 + - drivers/media/platform/bcm2835/Makefile | 3 + - .../media/platform/bcm2835/bcm2835-unicam.c | 2101 +++++++++++++++++ - .../media/platform/bcm2835/vc4-regs-unicam.h | 266 +++ - 6 files changed, 2387 insertions(+) - create mode 100644 drivers/media/platform/bcm2835/Kconfig - create mode 100644 drivers/media/platform/bcm2835/Makefile - create mode 100644 drivers/media/platform/bcm2835/bcm2835-unicam.c - create mode 100644 drivers/media/platform/bcm2835/vc4-regs-unicam.h - ---- a/drivers/media/platform/Kconfig -+++ b/drivers/media/platform/Kconfig -@@ -137,6 +137,7 @@ source "drivers/media/platform/am437x/Kc - source "drivers/media/platform/xilinx/Kconfig" - source "drivers/media/platform/rcar-vin/Kconfig" - source "drivers/media/platform/atmel/Kconfig" -+source "drivers/media/platform/bcm2835/Kconfig" - - config VIDEO_TI_CAL - tristate "TI CAL (Camera Adaptation Layer) driver" ---- a/drivers/media/platform/Makefile -+++ b/drivers/media/platform/Makefile -@@ -96,3 +96,5 @@ obj-$(CONFIG_VIDEO_QCOM_VENUS) += qcom/ - obj-y += meson/ - - obj-y += cros-ec-cec/ -+ -+obj-y += bcm2835/ ---- /dev/null -+++ b/drivers/media/platform/bcm2835/Kconfig -@@ -0,0 +1,14 @@ -+# Broadcom VideoCore4 V4L2 camera support -+ -+config VIDEO_BCM2835_UNICAM -+ tristate "Broadcom BCM2835 Unicam video capture driver" -+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API -+ depends on ARCH_BCM2835 || COMPILE_TEST -+ select VIDEOBUF2_DMA_CONTIG -+ select V4L2_FWNODE -+ help -+ Say Y here to enable V4L2 subdevice for CSI2 receiver. -+ This is a V4L2 subdevice that interfaces directly to the VC4 peripheral. -+ -+ To compile this driver as a module, choose M here. The module -+ will be called bcm2835-unicam. ---- /dev/null -+++ b/drivers/media/platform/bcm2835/Makefile -@@ -0,0 +1,3 @@ -+# Makefile for BCM2835 Unicam driver -+ -+obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o ---- /dev/null -+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c -@@ -0,0 +1,2101 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* -+ * BCM2835 Unicam capture Driver -+ * -+ * Copyright (C) 2017 - Raspberry Pi (Trading) Ltd. -+ * -+ * Dave Stevenson -+ * -+ * Based on TI am437x driver by Benoit Parrot and Lad, Prabhakar and -+ * TI CAL camera interface driver by Benoit Parrot. -+ * -+ * -+ * There are two camera drivers in the kernel for BCM283x - this one -+ * and bcm2835-camera (currently in staging). -+ * -+ * This driver directly controls the Unicam peripheral - there is no -+ * involvement with the VideoCore firmware. Unicam receives CSI-2 or -+ * CCP2 data and writes it into SDRAM. The only potential processing options are -+ * to repack Bayer data into an alternate format, and applying windowing. -+ * The repacking does not shift the data, so could repack V4L2_PIX_FMT_Sxxxx10P -+ * to V4L2_PIX_FMT_Sxxxx10, or V4L2_PIX_FMT_Sxxxx12P to V4L2_PIX_FMT_Sxxxx12, -+ * but not generically up to V4L2_PIX_FMT_Sxxxx16. -+ * Adding support for repacking and windowing may be added later. -+ * -+ * It should be possible to connect this driver to any sensor with a -+ * suitable output interface and V4L2 subdevice driver. -+ * -+ * bcm2835-camera uses the VideoCore firmware to control the sensor, -+ * Unicam, ISP, and all tuner control loops. Fully processed frames are -+ * delivered to the driver by the firmware. It only has sensor drivers -+ * for Omnivision OV5647, and Sony IMX219 sensors. -+ * -+ * The two drivers are mutually exclusive for the same Unicam instance. -+ * The VideoCore firmware checks the device tree configuration during boot. -+ * If it finds device tree nodes called csi0 or csi1 it will block the -+ * firmware from accessing the peripheral, and bcm2835-camera will -+ * not be able to stream data. -+ * -+ * -+ * This program is free software; you may redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS -+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN -+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -+ * SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "vc4-regs-unicam.h" -+ -+#define UNICAM_MODULE_NAME "unicam" -+#define UNICAM_VERSION "0.1.0" -+ -+static int debug; -+module_param(debug, int, 0644); -+MODULE_PARM_DESC(debug, "Debug level 0-3"); -+ -+#define unicam_dbg(level, dev, fmt, arg...) \ -+ v4l2_dbg(level, debug, &(dev)->v4l2_dev, fmt, ##arg) -+#define unicam_info(dev, fmt, arg...) \ -+ v4l2_info(&(dev)->v4l2_dev, fmt, ##arg) -+#define unicam_err(dev, fmt, arg...) \ -+ v4l2_err(&(dev)->v4l2_dev, fmt, ##arg) -+ -+/* -+ * Stride is a 16 bit register, but also has to be a multiple of 16. -+ */ -+#define BPL_ALIGNMENT 16 -+#define MAX_BYTESPERLINE ((1 << 16) - BPL_ALIGNMENT) -+/* -+ * Max width is therefore determined by the max stride divided by -+ * the number of bits per pixel. Take 32bpp as a -+ * worst case. -+ * No imposed limit on the height, so adopt a square image for want -+ * of anything better. -+ */ -+#define MAX_WIDTH (MAX_BYTESPERLINE / 4) -+#define MAX_HEIGHT MAX_WIDTH -+/* Define a nominal minimum image size */ -+#define MIN_WIDTH 16 -+#define MIN_HEIGHT 16 -+/* -+ * Whilst Unicam doesn't require any additional padding on the image -+ * height, various other parts of the BCM283x frameworks require a multiple -+ * of 16. -+ * Seeing as image buffers are significantly larger than this extra -+ * padding, add it in order to simplify integration. -+ */ -+#define HEIGHT_ALIGNMENT 16 -+ -+/* -+ * struct unicam_fmt - Unicam media bus format information -+ * @pixelformat: V4L2 pixel format FCC identifier. -+ * @code: V4L2 media bus format code. -+ * @depth: Bits per pixel (when stored in memory). -+ * @csi_dt: CSI data type. -+ */ -+struct unicam_fmt { -+ u32 fourcc; -+ u32 code; -+ u8 depth; -+ u8 csi_dt; -+}; -+ -+static const struct unicam_fmt formats[] = { -+ /* YUV Formats */ -+ { -+ .fourcc = V4L2_PIX_FMT_YUYV, -+ .code = MEDIA_BUS_FMT_YUYV8_2X8, -+ .depth = 16, -+ .csi_dt = 0x1e, -+ }, { -+ .fourcc = V4L2_PIX_FMT_UYVY, -+ .code = MEDIA_BUS_FMT_UYVY8_2X8, -+ .depth = 16, -+ .csi_dt = 0x1e, -+ }, { -+ .fourcc = V4L2_PIX_FMT_YVYU, -+ .code = MEDIA_BUS_FMT_YVYU8_2X8, -+ .depth = 16, -+ .csi_dt = 0x1e, -+ }, { -+ .fourcc = V4L2_PIX_FMT_VYUY, -+ .code = MEDIA_BUS_FMT_VYUY8_2X8, -+ .depth = 16, -+ .csi_dt = 0x1e, -+ }, { -+ .fourcc = V4L2_PIX_FMT_YUYV, -+ .code = MEDIA_BUS_FMT_YUYV8_1X16, -+ .depth = 16, -+ .csi_dt = 0x1e, -+ }, { -+ .fourcc = V4L2_PIX_FMT_UYVY, -+ .code = MEDIA_BUS_FMT_UYVY8_1X16, -+ .depth = 16, -+ .csi_dt = 0x1e, -+ }, { -+ .fourcc = V4L2_PIX_FMT_YVYU, -+ .code = MEDIA_BUS_FMT_YVYU8_1X16, -+ .depth = 16, -+ .csi_dt = 0x1e, -+ }, { -+ .fourcc = V4L2_PIX_FMT_VYUY, -+ .code = MEDIA_BUS_FMT_VYUY8_1X16, -+ .depth = 16, -+ .csi_dt = 0x1e, -+ }, { -+ /* RGB Formats */ -+ .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ -+ .code = MEDIA_BUS_FMT_RGB565_2X8_LE, -+ .depth = 16, -+ .csi_dt = 0x22, -+ }, { -+ .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ -+ .code = MEDIA_BUS_FMT_RGB565_2X8_BE, -+ .depth = 16, -+ .csi_dt = 0x22 -+ }, { -+ .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */ -+ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, -+ .depth = 16, -+ .csi_dt = 0x21, -+ }, { -+ .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */ -+ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE, -+ .depth = 16, -+ .csi_dt = 0x21, -+ }, { -+ .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */ -+ .code = MEDIA_BUS_FMT_RGB888_1X24, -+ .depth = 24, -+ .csi_dt = 0x24, -+ }, { -+ .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */ -+ .code = MEDIA_BUS_FMT_BGR888_1X24, -+ .depth = 24, -+ .csi_dt = 0x24, -+ }, { -+ .fourcc = V4L2_PIX_FMT_RGB32, /* argb */ -+ .code = MEDIA_BUS_FMT_ARGB8888_1X32, -+ .depth = 32, -+ .csi_dt = 0x0, -+ }, { -+ /* Bayer Formats */ -+ .fourcc = V4L2_PIX_FMT_SBGGR8, -+ .code = MEDIA_BUS_FMT_SBGGR8_1X8, -+ .depth = 8, -+ .csi_dt = 0x2a, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGBRG8, -+ .code = MEDIA_BUS_FMT_SGBRG8_1X8, -+ .depth = 8, -+ .csi_dt = 0x2a, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGRBG8, -+ .code = MEDIA_BUS_FMT_SGRBG8_1X8, -+ .depth = 8, -+ .csi_dt = 0x2a, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SRGGB8, -+ .code = MEDIA_BUS_FMT_SRGGB8_1X8, -+ .depth = 8, -+ .csi_dt = 0x2a, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SBGGR10P, -+ .code = MEDIA_BUS_FMT_SBGGR10_1X10, -+ .depth = 10, -+ .csi_dt = 0x2b, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGBRG10P, -+ .code = MEDIA_BUS_FMT_SGBRG10_1X10, -+ .depth = 10, -+ .csi_dt = 0x2b, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGRBG10P, -+ .code = MEDIA_BUS_FMT_SGRBG10_1X10, -+ .depth = 10, -+ .csi_dt = 0x2b, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SRGGB10P, -+ .code = MEDIA_BUS_FMT_SRGGB10_1X10, -+ .depth = 10, -+ .csi_dt = 0x2b, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SBGGR12P, -+ .code = MEDIA_BUS_FMT_SBGGR12_1X12, -+ .depth = 12, -+ .csi_dt = 0x2c, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGBRG12P, -+ .code = MEDIA_BUS_FMT_SGBRG12_1X12, -+ .depth = 12, -+ .csi_dt = 0x2c, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGRBG12P, -+ .code = MEDIA_BUS_FMT_SGRBG12_1X12, -+ .depth = 12, -+ .csi_dt = 0x2c, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SRGGB12P, -+ .code = MEDIA_BUS_FMT_SRGGB12_1X12, -+ .depth = 12, -+ .csi_dt = 0x2c, -+ }, -+ /* -+ * 14 and 16 bit Bayer formats could be supported, but there are no V4L2 -+ * defines for 14bit packed Bayer, and no CSI2 data_type for raw 16. -+ */ -+}; -+ -+struct unicam_dmaqueue { -+ struct list_head active; -+}; -+ -+struct unicam_buffer { -+ struct vb2_v4l2_buffer vb; -+ struct list_head list; -+}; -+ -+struct unicam_cfg { -+ /* peripheral base address */ -+ void __iomem *base; -+ /* clock gating base address */ -+ void __iomem *clk_gate_base; -+}; -+ -+#define MAX_POSSIBLE_PIX_FMTS (ARRAY_SIZE(formats)) -+ -+struct unicam_device { -+ /* V4l2 specific parameters */ -+ /* Identifies video device for this channel */ -+ struct video_device video_dev; -+ struct v4l2_ctrl_handler ctrl_handler; -+ -+ struct v4l2_fwnode_endpoint endpoint; -+ -+ struct v4l2_async_subdev asd; -+ -+ /* unicam cfg */ -+ struct unicam_cfg cfg; -+ /* clock handle */ -+ struct clk *clock; -+ /* V4l2 device */ -+ struct v4l2_device v4l2_dev; -+ /* parent device */ -+ struct platform_device *pdev; -+ /* subdevice async Notifier */ -+ struct v4l2_async_notifier notifier; -+ unsigned int sequence; -+ -+ /* ptr to sub device */ -+ struct v4l2_subdev *sensor; -+ /* Pad config for the sensor */ -+ struct v4l2_subdev_pad_config *sensor_config; -+ /* current input at the sub device */ -+ int current_input; -+ -+ /* Pointer pointing to current v4l2_buffer */ -+ struct unicam_buffer *cur_frm; -+ /* Pointer pointing to next v4l2_buffer */ -+ struct unicam_buffer *next_frm; -+ -+ /* video capture */ -+ const struct unicam_fmt *fmt; -+ /* Used to store current pixel format */ -+ struct v4l2_format v_fmt; -+ /* Used to store current mbus frame format */ -+ struct v4l2_mbus_framefmt m_fmt; -+ -+ struct unicam_fmt active_fmts[MAX_POSSIBLE_PIX_FMTS]; -+ int num_active_fmt; -+ unsigned int virtual_channel; -+ enum v4l2_mbus_type bus_type; -+ /* -+ * Stores bus.mipi_csi2.flags for CSI2 sensors, or -+ * bus.mipi_csi1.strobe for CCP2. -+ */ -+ unsigned int bus_flags; -+ unsigned int max_data_lanes; -+ unsigned int active_data_lanes; -+ -+ struct v4l2_rect crop; -+ -+ /* Currently selected input on subdev */ -+ int input; -+ -+ /* Buffer queue used in video-buf */ -+ struct vb2_queue buffer_queue; -+ /* Queue of filled frames */ -+ struct unicam_dmaqueue dma_queue; -+ /* IRQ lock for DMA queue */ -+ spinlock_t dma_queue_lock; -+ /* lock used to access this structure */ -+ struct mutex lock; -+ /* Flag to denote that we are processing buffers */ -+ int streaming; -+}; -+ -+/* Hardware access */ -+#define clk_write(dev, val) writel((val) | 0x5a000000, (dev)->clk_gate_base) -+#define clk_read(dev) readl((dev)->clk_gate_base) -+ -+#define reg_read(dev, offset) readl((dev)->base + (offset)) -+#define reg_write(dev, offset, val) writel(val, (dev)->base + (offset)) -+ -+#define reg_read_field(dev, offset, mask) get_field(reg_read((dev), (offset), \ -+ mask)) -+ -+static inline int get_field(u32 value, u32 mask) -+{ -+ return (value & mask) >> __ffs(mask); -+} -+ -+static inline void set_field(u32 *valp, u32 field, u32 mask) -+{ -+ u32 val = *valp; -+ -+ val &= ~mask; -+ val |= (field << __ffs(mask)) & mask; -+ *valp = val; -+} -+ -+static inline void reg_write_field(struct unicam_cfg *dev, u32 offset, -+ u32 field, u32 mask) -+{ -+ u32 val = reg_read((dev), (offset)); -+ -+ set_field(&val, field, mask); -+ reg_write((dev), (offset), val); -+} -+ -+/* Power management functions */ -+static inline int unicam_runtime_get(struct unicam_device *dev) -+{ -+ int r; -+ -+ r = pm_runtime_get_sync(&dev->pdev->dev); -+ -+ return r; -+} -+ -+static inline void unicam_runtime_put(struct unicam_device *dev) -+{ -+ pm_runtime_put_sync(&dev->pdev->dev); -+} -+ -+/* Format setup functions */ -+static int find_mbus_depth_by_code(u32 code) -+{ -+ const struct unicam_fmt *fmt; -+ unsigned int k; -+ -+ for (k = 0; k < ARRAY_SIZE(formats); k++) { -+ fmt = &formats[k]; -+ if (fmt->code == code) -+ return fmt->depth; -+ } -+ -+ return 0; -+} -+ -+static const struct unicam_fmt *find_format_by_code(struct unicam_device *dev, -+ u32 code) -+{ -+ const struct unicam_fmt *fmt; -+ unsigned int k; -+ -+ for (k = 0; k < dev->num_active_fmt; k++) { -+ fmt = &dev->active_fmts[k]; -+ if (fmt->code == code) -+ return fmt; -+ } -+ -+ return NULL; -+} -+ -+static const struct unicam_fmt *find_format_by_pix(struct unicam_device *dev, -+ u32 pixelformat) -+{ -+ const struct unicam_fmt *fmt; -+ unsigned int k; -+ -+ for (k = 0; k < dev->num_active_fmt; k++) { -+ fmt = &dev->active_fmts[k]; -+ if (fmt->fourcc == pixelformat) -+ return fmt; -+ } -+ -+ return NULL; -+} -+ -+static void dump_active_formats(struct unicam_device *dev) -+{ -+ int i; -+ -+ for (i = 0; i < dev->num_active_fmt; i++) { -+ unicam_dbg(3, dev, "active_fmt[%d] (%p) is code %04x, fourcc " V4L2_FOURCC_CONV ", depth %d\n", -+ i, &dev->active_fmts[i], dev->active_fmts[i].code, -+ V4L2_FOURCC_CONV_ARGS(dev->active_fmts[i].fourcc), -+ dev->active_fmts[i].depth); -+ } -+} -+ -+static inline unsigned int bytes_per_line(u32 width, -+ const struct unicam_fmt *fmt) -+{ -+ return ALIGN((width * fmt->depth) >> 3, BPL_ALIGNMENT); -+} -+ -+static int __subdev_get_format(struct unicam_device *dev, -+ struct v4l2_mbus_framefmt *fmt) -+{ -+ struct v4l2_subdev_format sd_fmt = {0}; -+ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format; -+ int ret; -+ -+ sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; -+ sd_fmt.pad = 0; -+ -+ ret = v4l2_subdev_call(dev->sensor, pad, get_fmt, dev->sensor_config, -+ &sd_fmt); -+ if (ret < 0) -+ return ret; -+ -+ *fmt = *mbus_fmt; -+ -+ unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__, -+ fmt->width, fmt->height, fmt->code); -+ -+ return 0; -+} -+ -+static int __subdev_set_format(struct unicam_device *dev, -+ struct v4l2_mbus_framefmt *fmt) -+{ -+ struct v4l2_subdev_format sd_fmt = { -+ .which = V4L2_SUBDEV_FORMAT_ACTIVE, -+ }; -+ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format; -+ int ret; -+ -+ *mbus_fmt = *fmt; -+ -+ ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config, -+ &sd_fmt); -+ if (ret < 0) -+ return ret; -+ -+ unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__, -+ fmt->width, fmt->height, fmt->code); -+ -+ return 0; -+} -+ -+static int unicam_calc_format_size_bpl(struct unicam_device *dev, -+ const struct unicam_fmt *fmt, -+ struct v4l2_format *f) -+{ -+ unsigned int min_bytesperline; -+ -+ v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, MAX_WIDTH, 2, -+ &f->fmt.pix.height, MIN_HEIGHT, MAX_HEIGHT, 0, -+ 0); -+ -+ min_bytesperline = bytes_per_line(f->fmt.pix.width, fmt); -+ -+ if (f->fmt.pix.bytesperline > min_bytesperline && -+ f->fmt.pix.bytesperline <= MAX_BYTESPERLINE) -+ f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline, -+ BPL_ALIGNMENT); -+ else -+ f->fmt.pix.bytesperline = min_bytesperline; -+ -+ /* Align height up for compatibility with other hardware blocks */ -+ f->fmt.pix.sizeimage = ALIGN(f->fmt.pix.height, HEIGHT_ALIGNMENT) * -+ f->fmt.pix.bytesperline; -+ -+ unicam_dbg(3, dev, "%s: fourcc: " V4L2_FOURCC_CONV " size: %dx%d bpl:%d img_size:%d\n", -+ __func__, -+ V4L2_FOURCC_CONV_ARGS(f->fmt.pix.pixelformat), -+ f->fmt.pix.width, f->fmt.pix.height, -+ f->fmt.pix.bytesperline, f->fmt.pix.sizeimage); -+ -+ return 0; -+} -+ -+static int unicam_reset_format(struct unicam_device *dev) -+{ -+ struct v4l2_mbus_framefmt mbus_fmt; -+ int ret; -+ -+ ret = __subdev_get_format(dev, &mbus_fmt); -+ if (ret) { -+ unicam_err(dev, "Failed to get_format - ret %d\n", ret); -+ return ret; -+ } -+ -+ if (mbus_fmt.code != dev->fmt->code) { -+ unicam_err(dev, "code mismatch - fmt->code %08x, mbus_fmt.code %08x\n", -+ dev->fmt->code, mbus_fmt.code); -+ return ret; -+ } -+ -+ v4l2_fill_pix_format(&dev->v_fmt.fmt.pix, &mbus_fmt); -+ dev->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; -+ -+ unicam_calc_format_size_bpl(dev, dev->fmt, &dev->v_fmt); -+ -+ dev->m_fmt = mbus_fmt; -+ -+ return 0; -+} -+ -+static void unicam_wr_dma_addr(struct unicam_device *dev, unsigned int dmaaddr) -+{ -+ unicam_dbg(1, dev, "wr_dma_addr %08x-%08x\n", -+ dmaaddr, dmaaddr + dev->v_fmt.fmt.pix.sizeimage); -+ reg_write(&dev->cfg, UNICAM_IBSA0, dmaaddr); -+ reg_write(&dev->cfg, UNICAM_IBEA0, -+ dmaaddr + dev->v_fmt.fmt.pix.sizeimage); -+} -+ -+static inline void unicam_schedule_next_buffer(struct unicam_device *dev) -+{ -+ struct unicam_dmaqueue *dma_q = &dev->dma_queue; -+ struct unicam_buffer *buf; -+ dma_addr_t addr; -+ -+ buf = list_entry(dma_q->active.next, struct unicam_buffer, list); -+ dev->next_frm = buf; -+ list_del(&buf->list); -+ -+ addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); -+ unicam_wr_dma_addr(dev, addr); -+} -+ -+static inline void unicam_process_buffer_complete(struct unicam_device *dev) -+{ -+ dev->cur_frm->vb.field = dev->m_fmt.field; -+ dev->cur_frm->vb.sequence = dev->sequence++; -+ -+ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE); -+ dev->cur_frm = dev->next_frm; -+} -+ -+/* -+ * unicam_isr : ISR handler for unicam capture -+ * @irq: irq number -+ * @dev_id: dev_id ptr -+ * -+ * It changes status of the captured buffer, takes next buffer from the queue -+ * and sets its address in unicam registers -+ */ -+static irqreturn_t unicam_isr(int irq, void *dev) -+{ -+ struct unicam_device *unicam = (struct unicam_device *)dev; -+ struct unicam_cfg *cfg = &unicam->cfg; -+ struct unicam_dmaqueue *dma_q = &unicam->dma_queue; -+ int ista, sta; -+ -+ /* -+ * Don't service interrupts if not streaming. -+ * Avoids issues if the VPU should enable the -+ * peripheral without the kernel knowing (that -+ * shouldn't happen, but causes issues if it does). -+ */ -+ if (!unicam->streaming) -+ return IRQ_HANDLED; -+ -+ sta = reg_read(cfg, UNICAM_STA); -+ /* Write value back to clear the interrupts */ -+ reg_write(cfg, UNICAM_STA, sta); -+ -+ ista = reg_read(cfg, UNICAM_ISTA); -+ /* Write value back to clear the interrupts */ -+ reg_write(cfg, UNICAM_ISTA, ista); -+ -+ if (!(sta && (UNICAM_IS | UNICAM_PI0))) -+ return IRQ_HANDLED; -+ -+ if (ista & UNICAM_FSI) { -+ /* -+ * Timestamp is to be when the first data byte was captured, -+ * aka frame start. -+ */ -+ if (unicam->cur_frm) -+ unicam->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns(); -+ } -+ if (ista & UNICAM_FEI || sta & UNICAM_PI0) { -+ /* -+ * Ensure we have swapped buffers already as we can't -+ * stop the peripheral. Overwrite the frame we've just -+ * captured instead. -+ */ -+ if (unicam->cur_frm && unicam->cur_frm != unicam->next_frm) -+ unicam_process_buffer_complete(unicam); -+ } -+ -+ if (ista & (UNICAM_FSI | UNICAM_LCI)) { -+ spin_lock(&unicam->dma_queue_lock); -+ if (!list_empty(&dma_q->active) && -+ unicam->cur_frm == unicam->next_frm) -+ unicam_schedule_next_buffer(unicam); -+ spin_unlock(&unicam->dma_queue_lock); -+ } -+ -+ if (reg_read(&unicam->cfg, UNICAM_ICTL) & UNICAM_FCM) { -+ /* Switch out of trigger mode if selected */ -+ reg_write_field(&unicam->cfg, UNICAM_ICTL, 1, UNICAM_TFC); -+ reg_write_field(&unicam->cfg, UNICAM_ICTL, 0, UNICAM_FCM); -+ } -+ return IRQ_HANDLED; -+} -+ -+static int unicam_querycap(struct file *file, void *priv, -+ struct v4l2_capability *cap) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ strlcpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver)); -+ strlcpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card)); -+ -+ snprintf(cap->bus_info, sizeof(cap->bus_info), -+ "platform:%s", dev->v4l2_dev.name); -+ -+ return 0; -+} -+ -+static int unicam_enum_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_fmtdesc *f) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ const struct unicam_fmt *fmt = NULL; -+ -+ if (f->index >= dev->num_active_fmt) -+ return -EINVAL; -+ -+ fmt = &dev->active_fmts[f->index]; -+ -+ f->pixelformat = fmt->fourcc; -+ -+ return 0; -+} -+ -+static int unicam_g_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ *f = dev->v_fmt; -+ -+ return 0; -+} -+ -+static int unicam_try_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ const struct unicam_fmt *fmt; -+ struct v4l2_subdev_format sd_fmt = { -+ .which = V4L2_SUBDEV_FORMAT_TRY, -+ }; -+ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format; -+ int ret; -+ -+ fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat); -+ if (!fmt) { -+ unicam_dbg(3, dev, "Fourcc format (0x%08x) not found. Use default of %08X\n", -+ f->fmt.pix.pixelformat, dev->active_fmts[0].fourcc); -+ -+ /* Just get the first one enumerated */ -+ fmt = &dev->active_fmts[0]; -+ f->fmt.pix.pixelformat = fmt->fourcc; -+ } -+ -+ v4l2_fill_mbus_format(mbus_fmt, &f->fmt.pix, fmt->code); -+ /* -+ * No support for receiving interlaced video, so never -+ * request it from the sensor subdev. -+ */ -+ mbus_fmt->field = V4L2_FIELD_NONE; -+ -+ ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config, -+ &sd_fmt); -+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) -+ return ret; -+ -+ if (mbus_fmt->field != V4L2_FIELD_NONE) -+ unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n"); -+ -+ v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format); -+ /* -+ * Use current colorspace for now, it will get -+ * updated properly during s_fmt -+ */ -+ f->fmt.pix.colorspace = dev->v_fmt.fmt.pix.colorspace; -+ return unicam_calc_format_size_bpl(dev, fmt, f); -+} -+ -+static int unicam_s_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ struct vb2_queue *q = &dev->buffer_queue; -+ const struct unicam_fmt *fmt; -+ struct v4l2_mbus_framefmt mbus_fmt = {0}; -+ int ret; -+ -+ if (vb2_is_busy(q)) -+ return -EBUSY; -+ -+ ret = unicam_try_fmt_vid_cap(file, priv, f); -+ if (ret < 0) -+ return ret; -+ -+ fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat); -+ if (!fmt) { -+ /* Unknown pixel format - adopt a default */ -+ fmt = &dev->active_fmts[0]; -+ f->fmt.pix.pixelformat = fmt->fourcc; -+ return -EINVAL; -+ } -+ -+ v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code); -+ -+ ret = __subdev_set_format(dev, &mbus_fmt); -+ if (ret) { -+ unicam_dbg(3, dev, "%s __subdev_set_format failed %d\n", -+ __func__, ret); -+ return ret; -+ } -+ -+ /* Just double check nothing has gone wrong */ -+ if (mbus_fmt.code != fmt->code) { -+ unicam_dbg(3, dev, -+ "%s subdev changed format on us, this should not happen\n", -+ __func__); -+ return -EINVAL; -+ } -+ -+ dev->fmt = fmt; -+ dev->v_fmt.fmt.pix.pixelformat = f->fmt.pix.pixelformat; -+ dev->v_fmt.fmt.pix.bytesperline = f->fmt.pix.bytesperline; -+ unicam_reset_format(dev); -+ -+ unicam_dbg(3, dev, "%s %dx%d, mbus_fmt %08X, V4L2 pix " V4L2_FOURCC_CONV ".\n", -+ __func__, dev->v_fmt.fmt.pix.width, -+ dev->v_fmt.fmt.pix.height, mbus_fmt.code, -+ V4L2_FOURCC_CONV_ARGS(dev->v_fmt.fmt.pix.pixelformat)); -+ -+ *f = dev->v_fmt; -+ -+ return 0; -+} -+ -+static int unicam_queue_setup(struct vb2_queue *vq, -+ unsigned int *nbuffers, -+ unsigned int *nplanes, -+ unsigned int sizes[], -+ struct device *alloc_devs[]) -+{ -+ struct unicam_device *dev = vb2_get_drv_priv(vq); -+ unsigned int size = dev->v_fmt.fmt.pix.sizeimage; -+ -+ if (vq->num_buffers + *nbuffers < 3) -+ *nbuffers = 3 - vq->num_buffers; -+ -+ if (*nplanes) { -+ if (sizes[0] < size) { -+ unicam_err(dev, "sizes[0] %i < size %u\n", sizes[0], -+ size); -+ return -EINVAL; -+ } -+ size = sizes[0]; -+ } -+ -+ *nplanes = 1; -+ sizes[0] = size; -+ -+ return 0; -+} -+ -+static int unicam_buffer_prepare(struct vb2_buffer *vb) -+{ -+ struct unicam_device *dev = vb2_get_drv_priv(vb->vb2_queue); -+ struct unicam_buffer *buf = container_of(vb, struct unicam_buffer, -+ vb.vb2_buf); -+ unsigned long size; -+ -+ if (WARN_ON(!dev->fmt)) -+ return -EINVAL; -+ -+ size = dev->v_fmt.fmt.pix.sizeimage; -+ if (vb2_plane_size(vb, 0) < size) { -+ unicam_err(dev, "data will not fit into plane (%lu < %lu)\n", -+ vb2_plane_size(vb, 0), size); -+ return -EINVAL; -+ } -+ -+ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size); -+ return 0; -+} -+ -+static void unicam_buffer_queue(struct vb2_buffer *vb) -+{ -+ struct unicam_device *dev = vb2_get_drv_priv(vb->vb2_queue); -+ struct unicam_buffer *buf = container_of(vb, struct unicam_buffer, -+ vb.vb2_buf); -+ struct unicam_dmaqueue *dma_queue = &dev->dma_queue; -+ unsigned long flags = 0; -+ -+ /* recheck locking */ -+ spin_lock_irqsave(&dev->dma_queue_lock, flags); -+ list_add_tail(&buf->list, &dma_queue->active); -+ spin_unlock_irqrestore(&dev->dma_queue_lock, flags); -+} -+ -+static void unicam_wr_dma_config(struct unicam_device *dev, -+ unsigned int stride) -+{ -+ reg_write(&dev->cfg, UNICAM_IBLS, stride); -+} -+ -+static void unicam_set_packing_config(struct unicam_device *dev) -+{ -+ int mbus_depth = find_mbus_depth_by_code(dev->fmt->code); -+ int v4l2_depth = dev->fmt->depth; -+ int pack, unpack; -+ u32 val; -+ -+ if (mbus_depth == v4l2_depth) { -+ unpack = UNICAM_PUM_NONE; -+ pack = UNICAM_PPM_NONE; -+ } else { -+ switch (mbus_depth) { -+ case 8: -+ unpack = UNICAM_PUM_UNPACK8; -+ break; -+ case 10: -+ unpack = UNICAM_PUM_UNPACK10; -+ break; -+ case 12: -+ unpack = UNICAM_PUM_UNPACK12; -+ break; -+ case 14: -+ unpack = UNICAM_PUM_UNPACK14; -+ break; -+ case 16: -+ unpack = UNICAM_PUM_UNPACK16; -+ break; -+ default: -+ unpack = UNICAM_PUM_NONE; -+ break; -+ } -+ switch (v4l2_depth) { -+ case 8: -+ pack = UNICAM_PPM_PACK8; -+ break; -+ case 10: -+ pack = UNICAM_PPM_PACK10; -+ break; -+ case 12: -+ pack = UNICAM_PPM_PACK12; -+ break; -+ case 14: -+ pack = UNICAM_PPM_PACK14; -+ break; -+ case 16: -+ pack = UNICAM_PPM_PACK16; -+ break; -+ default: -+ pack = UNICAM_PPM_NONE; -+ break; -+ } -+ } -+ -+ val = 0; -+ set_field(&val, 2, UNICAM_DEBL_MASK); -+ set_field(&val, unpack, UNICAM_PUM_MASK); -+ set_field(&val, pack, UNICAM_PPM_MASK); -+ reg_write(&dev->cfg, UNICAM_IPIPE, val); -+} -+ -+static void unicam_cfg_image_id(struct unicam_device *dev) -+{ -+ struct unicam_cfg *cfg = &dev->cfg; -+ -+ if (dev->bus_type == V4L2_MBUS_CSI2) { -+ /* CSI2 mode */ -+ reg_write(cfg, UNICAM_IDI0, -+ (dev->virtual_channel << 6) | dev->fmt->csi_dt); -+ } else { -+ /* CCP2 mode */ -+ reg_write(cfg, UNICAM_IDI0, (0x80 | dev->fmt->csi_dt)); -+ } -+} -+ -+void unicam_start_rx(struct unicam_device *dev, unsigned long addr) -+{ -+ struct unicam_cfg *cfg = &dev->cfg; -+ int line_int_freq = dev->v_fmt.fmt.pix.height >> 2; -+ unsigned int i; -+ u32 val; -+ -+ if (line_int_freq < 128) -+ line_int_freq = 128; -+ -+ /* Enable lane clocks */ -+ val = 1; -+ for (i = 0; i < dev->active_data_lanes; i++) -+ val = val << 2 | 1; -+ clk_write(cfg, val); -+ -+ /* Basic init */ -+ reg_write(cfg, UNICAM_CTRL, UNICAM_MEM); -+ -+ /* Enable analogue control, and leave in reset. */ -+ val = UNICAM_AR; -+ set_field(&val, 7, UNICAM_CTATADJ_MASK); -+ set_field(&val, 7, UNICAM_PTATADJ_MASK); -+ reg_write(cfg, UNICAM_ANA, val); -+ usleep_range(1000, 2000); -+ -+ /* Come out of reset */ -+ reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_AR); -+ -+ /* Peripheral reset */ -+ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR); -+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR); -+ -+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE); -+ -+ /* Enable Rx control. */ -+ val = reg_read(cfg, UNICAM_CTRL); -+ if (dev->bus_type == V4L2_MBUS_CSI2) { -+ set_field(&val, UNICAM_CPM_CSI2, UNICAM_CPM_MASK); -+ set_field(&val, UNICAM_DCM_STROBE, UNICAM_DCM_MASK); -+ } else { -+ set_field(&val, UNICAM_CPM_CCP2, UNICAM_CPM_MASK); -+ set_field(&val, dev->bus_flags, UNICAM_DCM_MASK); -+ } -+ /* Packet framer timeout */ -+ set_field(&val, 0xf, UNICAM_PFT_MASK); -+ set_field(&val, 128, UNICAM_OET_MASK); -+ reg_write(cfg, UNICAM_CTRL, val); -+ -+ reg_write(cfg, UNICAM_IHWIN, 0); -+ reg_write(cfg, UNICAM_IVWIN, 0); -+ -+ /* AXI bus access QoS setup */ -+ val = reg_read(&dev->cfg, UNICAM_PRI); -+ set_field(&val, 0, UNICAM_BL_MASK); -+ set_field(&val, 0, UNICAM_BS_MASK); -+ set_field(&val, 0xe, UNICAM_PP_MASK); -+ set_field(&val, 8, UNICAM_NP_MASK); -+ set_field(&val, 2, UNICAM_PT_MASK); -+ set_field(&val, 1, UNICAM_PE); -+ reg_write(cfg, UNICAM_PRI, val); -+ -+ reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_DDL); -+ -+ /* Always start in trigger frame capture mode (UNICAM_FCM set) */ -+ val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM; -+ set_field(&val, line_int_freq, UNICAM_LCIE_MASK); -+ reg_write(cfg, UNICAM_ICTL, val); -+ reg_write(cfg, UNICAM_STA, UNICAM_STA_MASK_ALL); -+ reg_write(cfg, UNICAM_ISTA, UNICAM_ISTA_MASK_ALL); -+ -+ /* tclk_term_en */ -+ reg_write_field(cfg, UNICAM_CLT, 2, UNICAM_CLT1_MASK); -+ /* tclk_settle */ -+ reg_write_field(cfg, UNICAM_CLT, 6, UNICAM_CLT2_MASK); -+ /* td_term_en */ -+ reg_write_field(cfg, UNICAM_DLT, 2, UNICAM_DLT1_MASK); -+ /* ths_settle */ -+ reg_write_field(cfg, UNICAM_DLT, 6, UNICAM_DLT2_MASK); -+ /* trx_enable */ -+ reg_write_field(cfg, UNICAM_DLT, 0, UNICAM_DLT3_MASK); -+ -+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_SOE); -+ -+ /* Packet compare setup - required to avoid missing frame ends */ -+ val = 0; -+ set_field(&val, 1, UNICAM_PCE); -+ set_field(&val, 1, UNICAM_GI); -+ set_field(&val, 1, UNICAM_CPH); -+ set_field(&val, 0, UNICAM_PCVC_MASK); -+ set_field(&val, 1, UNICAM_PCDT_MASK); -+ reg_write(cfg, UNICAM_CMP0, val); -+ -+ /* Enable clock lane and set up terminations */ -+ val = 0; -+ if (dev->bus_type == V4L2_MBUS_CSI2) { -+ /* CSI2 */ -+ set_field(&val, 1, UNICAM_CLE); -+ set_field(&val, 1, UNICAM_CLLPE); -+ if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { -+ set_field(&val, 1, UNICAM_CLTRE); -+ set_field(&val, 1, UNICAM_CLHSE); -+ } -+ } else { -+ /* CCP2 */ -+ set_field(&val, 1, UNICAM_CLE); -+ set_field(&val, 1, UNICAM_CLHSE); -+ set_field(&val, 1, UNICAM_CLTRE); -+ } -+ reg_write(cfg, UNICAM_CLK, val); -+ -+ /* -+ * Enable required data lanes with appropriate terminations. -+ * The same value needs to be written to UNICAM_DATn registers for -+ * the active lanes, and 0 for inactive ones. -+ */ -+ val = 0; -+ if (dev->bus_type == V4L2_MBUS_CSI2) { -+ /* CSI2 */ -+ set_field(&val, 1, UNICAM_DLE); -+ set_field(&val, 1, UNICAM_DLLPE); -+ if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { -+ set_field(&val, 1, UNICAM_DLTRE); -+ set_field(&val, 1, UNICAM_DLHSE); -+ } -+ } else { -+ /* CCP2 */ -+ set_field(&val, 1, UNICAM_DLE); -+ set_field(&val, 1, UNICAM_DLHSE); -+ set_field(&val, 1, UNICAM_DLTRE); -+ } -+ reg_write(cfg, UNICAM_DAT0, val); -+ -+ if (dev->active_data_lanes == 1) -+ val = 0; -+ reg_write(cfg, UNICAM_DAT1, val); -+ -+ if (dev->max_data_lanes > 2) { -+ /* -+ * Registers UNICAM_DAT2 and UNICAM_DAT3 only valid if the -+ * instance supports more than 2 data lanes. -+ */ -+ if (dev->active_data_lanes == 2) -+ val = 0; -+ reg_write(cfg, UNICAM_DAT2, val); -+ -+ if (dev->active_data_lanes == 3) -+ val = 0; -+ reg_write(cfg, UNICAM_DAT3, val); -+ } -+ -+ unicam_wr_dma_config(dev, dev->v_fmt.fmt.pix.bytesperline); -+ unicam_wr_dma_addr(dev, addr); -+ unicam_set_packing_config(dev); -+ unicam_cfg_image_id(dev); -+ -+ /* Disabled embedded data */ -+ val = 0; -+ set_field(&val, 0, UNICAM_EDL_MASK); -+ reg_write(cfg, UNICAM_DCS, val); -+ -+ val = reg_read(cfg, UNICAM_MISC); -+ set_field(&val, 1, UNICAM_FL0); -+ set_field(&val, 1, UNICAM_FL1); -+ reg_write(cfg, UNICAM_MISC, val); -+ -+ /* Enable peripheral */ -+ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPE); -+ -+ /* Load image pointers */ -+ reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_LIP_MASK); -+ -+ /* -+ * Enable trigger only for the first frame to -+ * sync correctly to the FS from the source. -+ */ -+ reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_TFC); -+} -+ -+static void unicam_disable(struct unicam_device *dev) -+{ -+ struct unicam_cfg *cfg = &dev->cfg; -+ -+ /* Analogue lane control disable */ -+ reg_write_field(cfg, UNICAM_ANA, 1, UNICAM_DDL); -+ -+ /* Stop the output engine */ -+ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_SOE); -+ -+ /* Disable the data lanes. */ -+ reg_write(cfg, UNICAM_DAT0, 0); -+ reg_write(cfg, UNICAM_DAT1, 0); -+ -+ if (dev->max_data_lanes > 2) { -+ reg_write(cfg, UNICAM_DAT2, 0); -+ reg_write(cfg, UNICAM_DAT3, 0); -+ } -+ -+ /* Peripheral reset */ -+ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR); -+ usleep_range(50, 100); -+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR); -+ -+ /* Disable peripheral */ -+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE); -+ -+ /* Disable all lane clocks */ -+ clk_write(cfg, 0); -+} -+ -+static int unicam_start_streaming(struct vb2_queue *vq, unsigned int count) -+{ -+ struct unicam_device *dev = vb2_get_drv_priv(vq); -+ struct unicam_dmaqueue *dma_q = &dev->dma_queue; -+ struct unicam_buffer *buf, *tmp; -+ unsigned long addr = 0; -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&dev->dma_queue_lock, flags); -+ buf = list_entry(dma_q->active.next, struct unicam_buffer, list); -+ dev->cur_frm = buf; -+ dev->next_frm = buf; -+ list_del(&buf->list); -+ spin_unlock_irqrestore(&dev->dma_queue_lock, flags); -+ -+ addr = vb2_dma_contig_plane_dma_addr(&dev->cur_frm->vb.vb2_buf, 0); -+ dev->sequence = 0; -+ -+ ret = unicam_runtime_get(dev); -+ if (ret < 0) { -+ unicam_dbg(3, dev, "unicam_runtime_get failed\n"); -+ goto err_release_buffers; -+ } -+ -+ dev->active_data_lanes = dev->max_data_lanes; -+ if (dev->bus_type == V4L2_MBUS_CSI2 && -+ v4l2_subdev_has_op(dev->sensor, video, g_mbus_config)) { -+ struct v4l2_mbus_config mbus_config; -+ -+ ret = v4l2_subdev_call(dev->sensor, video, g_mbus_config, -+ &mbus_config); -+ if (ret < 0) { -+ unicam_dbg(3, dev, "g_mbus_config failed\n"); -+ goto err_pm_put; -+ } -+ -+ dev->active_data_lanes = -+ (mbus_config.flags & V4L2_MBUS_CSI2_LANE_MASK) >> -+ __ffs(V4L2_MBUS_CSI2_LANE_MASK); -+ if (!dev->active_data_lanes) -+ dev->active_data_lanes = dev->max_data_lanes; -+ } -+ if (dev->active_data_lanes > dev->max_data_lanes) { -+ unicam_err(dev, "Device has requested %u data lanes, which is >%u configured in DT\n", -+ dev->active_data_lanes, dev->max_data_lanes); -+ ret = -EINVAL; -+ goto err_pm_put; -+ } -+ -+ unicam_dbg(1, dev, "Running with %u data lanes\n", -+ dev->active_data_lanes); -+ -+ ret = clk_set_rate(dev->clock, 100 * 1000 * 1000); -+ if (ret) { -+ unicam_err(dev, "failed to set up clock\n"); -+ goto err_pm_put; -+ } -+ -+ ret = clk_prepare_enable(dev->clock); -+ if (ret) { -+ unicam_err(dev, "Failed to enable CSI clock: %d\n", ret); -+ goto err_pm_put; -+ } -+ ret = v4l2_subdev_call(dev->sensor, core, s_power, 1); -+ if (ret < 0 && ret != -ENOIOCTLCMD) { -+ unicam_err(dev, "power on failed in subdev\n"); -+ goto err_clock_unprepare; -+ } -+ dev->streaming = 1; -+ -+ unicam_start_rx(dev, addr); -+ -+ ret = v4l2_subdev_call(dev->sensor, video, s_stream, 1); -+ if (ret < 0) { -+ unicam_err(dev, "stream on failed in subdev\n"); -+ goto err_disable_unicam; -+ } -+ -+ return 0; -+ -+err_disable_unicam: -+ unicam_disable(dev); -+ v4l2_subdev_call(dev->sensor, core, s_power, 0); -+err_clock_unprepare: -+ clk_disable_unprepare(dev->clock); -+err_pm_put: -+ unicam_runtime_put(dev); -+err_release_buffers: -+ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) { -+ list_del(&buf->list); -+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); -+ } -+ if (dev->cur_frm != dev->next_frm) -+ vb2_buffer_done(&dev->next_frm->vb.vb2_buf, -+ VB2_BUF_STATE_QUEUED); -+ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_QUEUED); -+ dev->next_frm = NULL; -+ dev->cur_frm = NULL; -+ -+ return ret; -+} -+ -+static void unicam_stop_streaming(struct vb2_queue *vq) -+{ -+ struct unicam_device *dev = vb2_get_drv_priv(vq); -+ struct unicam_dmaqueue *dma_q = &dev->dma_queue; -+ struct unicam_buffer *buf, *tmp; -+ unsigned long flags; -+ -+ if (v4l2_subdev_call(dev->sensor, video, s_stream, 0) < 0) -+ unicam_err(dev, "stream off failed in subdev\n"); -+ -+ unicam_disable(dev); -+ -+ /* Release all active buffers */ -+ spin_lock_irqsave(&dev->dma_queue_lock, flags); -+ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) { -+ list_del(&buf->list); -+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); -+ } -+ -+ if (dev->cur_frm == dev->next_frm) { -+ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); -+ } else { -+ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); -+ vb2_buffer_done(&dev->next_frm->vb.vb2_buf, -+ VB2_BUF_STATE_ERROR); -+ } -+ dev->cur_frm = NULL; -+ dev->next_frm = NULL; -+ spin_unlock_irqrestore(&dev->dma_queue_lock, flags); -+ -+ if (v4l2_subdev_has_op(dev->sensor, core, s_power)) { -+ if (v4l2_subdev_call(dev->sensor, core, s_power, 0) < 0) -+ unicam_err(dev, "power off failed in subdev\n"); -+ } -+ -+ clk_disable_unprepare(dev->clock); -+ unicam_runtime_put(dev); -+} -+ -+static int unicam_enum_input(struct file *file, void *priv, -+ struct v4l2_input *inp) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ if (inp->index != 0) -+ return -EINVAL; -+ -+ inp->type = V4L2_INPUT_TYPE_CAMERA; -+ if (v4l2_subdev_has_op(dev->sensor, video, s_dv_timings)) { -+ inp->capabilities = V4L2_IN_CAP_DV_TIMINGS; -+ inp->std = 0; -+ } else if (v4l2_subdev_has_op(dev->sensor, video, s_std)) { -+ inp->capabilities = V4L2_IN_CAP_STD; -+ if (v4l2_subdev_call(dev->sensor, video, g_tvnorms, &inp->std) -+ < 0) -+ inp->std = V4L2_STD_ALL; -+ } else { -+ inp->capabilities = 0; -+ inp->std = 0; -+ } -+ sprintf(inp->name, "Camera 0"); -+ return 0; -+} -+ -+static int unicam_g_input(struct file *file, void *priv, unsigned int *i) -+{ -+ *i = 0; -+ -+ return 0; -+} -+ -+static int unicam_s_input(struct file *file, void *priv, unsigned int i) -+{ -+ /* -+ * FIXME: Ideally we would like to be able to query the source -+ * subdevice for information over the input connectors it supports, -+ * and map that through in to a call to video_ops->s_routing. -+ * There is no infrastructure support for defining that within -+ * devicetree at present. Until that is implemented we can't -+ * map a user physical connector number to s_routing input number. -+ */ -+ if (i > 0) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+static int unicam_querystd(struct file *file, void *priv, -+ v4l2_std_id *std) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_subdev_call(dev->sensor, video, querystd, std); -+} -+ -+static int unicam_g_std(struct file *file, void *priv, v4l2_std_id *std) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_subdev_call(dev->sensor, video, g_std, std); -+} -+ -+static int unicam_s_std(struct file *file, void *priv, v4l2_std_id std) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ int ret; -+ v4l2_std_id current_std; -+ -+ ret = v4l2_subdev_call(dev->sensor, video, g_std, ¤t_std); -+ if (ret) -+ return ret; -+ -+ if (std == current_std) -+ return 0; -+ -+ if (vb2_is_busy(&dev->buffer_queue)) -+ return -EBUSY; -+ -+ ret = v4l2_subdev_call(dev->sensor, video, s_std, std); -+ -+ /* Force recomputation of bytesperline */ -+ dev->v_fmt.fmt.pix.bytesperline = 0; -+ -+ unicam_reset_format(dev); -+ -+ return ret; -+} -+ -+static int unicam_s_edid(struct file *file, void *priv, struct v4l2_edid *edid) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_subdev_call(dev->sensor, pad, set_edid, edid); -+} -+ -+static int unicam_g_edid(struct file *file, void *priv, struct v4l2_edid *edid) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_subdev_call(dev->sensor, pad, get_edid, edid); -+} -+ -+static int unicam_g_dv_timings(struct file *file, void *priv, -+ struct v4l2_dv_timings *timings) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_subdev_call(dev->sensor, video, g_dv_timings, timings); -+} -+ -+static int unicam_s_dv_timings(struct file *file, void *priv, -+ struct v4l2_dv_timings *timings) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ struct v4l2_dv_timings current_timings; -+ int ret; -+ -+ ret = v4l2_subdev_call(dev->sensor, video, g_dv_timings, -+ ¤t_timings); -+ -+ if (v4l2_match_dv_timings(timings, ¤t_timings, 0, false)) -+ return 0; -+ -+ if (vb2_is_busy(&dev->buffer_queue)) -+ return -EBUSY; -+ -+ ret = v4l2_subdev_call(dev->sensor, video, s_dv_timings, timings); -+ -+ /* Force recomputation of bytesperline */ -+ dev->v_fmt.fmt.pix.bytesperline = 0; -+ -+ unicam_reset_format(dev); -+ -+ return ret; -+} -+ -+static int unicam_query_dv_timings(struct file *file, void *priv, -+ struct v4l2_dv_timings *timings) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_subdev_call(dev->sensor, video, query_dv_timings, timings); -+} -+ -+static int unicam_enum_dv_timings(struct file *file, void *priv, -+ struct v4l2_enum_dv_timings *timings) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_subdev_call(dev->sensor, pad, enum_dv_timings, timings); -+} -+ -+static int unicam_dv_timings_cap(struct file *file, void *priv, -+ struct v4l2_dv_timings_cap *cap) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_subdev_call(dev->sensor, pad, dv_timings_cap, cap); -+} -+ -+static int unicam_subscribe_event(struct v4l2_fh *fh, -+ const struct v4l2_event_subscription *sub) -+{ -+ switch (sub->type) { -+ case V4L2_EVENT_SOURCE_CHANGE: -+ return v4l2_event_subscribe(fh, sub, 4, NULL); -+ } -+ -+ return v4l2_ctrl_subscribe_event(fh, sub); -+} -+ -+static int unicam_log_status(struct file *file, void *fh) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ struct unicam_cfg *cfg = &dev->cfg; -+ u32 reg; -+ -+ /* status for sub devices */ -+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, log_status); -+ -+ unicam_info(dev, "-----Receiver status-----\n"); -+ unicam_info(dev, "V4L2 width/height: %ux%u\n", -+ dev->v_fmt.fmt.pix.width, dev->v_fmt.fmt.pix.height); -+ unicam_info(dev, "Mediabus format: %08x\n", dev->fmt->code); -+ unicam_info(dev, "V4L2 format: " V4L2_FOURCC_CONV "\n", -+ V4L2_FOURCC_CONV_ARGS(dev->v_fmt.fmt.pix.pixelformat)); -+ reg = reg_read(&dev->cfg, UNICAM_IPIPE); -+ unicam_info(dev, "Unpacking/packing: %u / %u\n", -+ get_field(reg, UNICAM_PUM_MASK), -+ get_field(reg, UNICAM_PPM_MASK)); -+ unicam_info(dev, "----Live data----\n"); -+ unicam_info(dev, "Programmed stride: %4u\n", -+ reg_read(cfg, UNICAM_IBLS)); -+ unicam_info(dev, "Detected resolution: %ux%u\n", -+ reg_read(cfg, UNICAM_IHSTA), -+ reg_read(cfg, UNICAM_IVSTA)); -+ unicam_info(dev, "Write pointer: %08x\n", -+ reg_read(cfg, UNICAM_IBWP)); -+ -+ return 0; -+} -+ -+static void unicam_notify(struct v4l2_subdev *sd, -+ unsigned int notification, void *arg) -+{ -+ struct unicam_device *dev = -+ container_of(sd->v4l2_dev, struct unicam_device, v4l2_dev); -+ -+ switch (notification) { -+ case V4L2_DEVICE_NOTIFY_EVENT: -+ v4l2_event_queue(&dev->video_dev, arg); -+ break; -+ default: -+ break; -+ } -+} -+ -+static const struct vb2_ops unicam_video_qops = { -+ .wait_prepare = vb2_ops_wait_prepare, -+ .wait_finish = vb2_ops_wait_finish, -+ .queue_setup = unicam_queue_setup, -+ .buf_prepare = unicam_buffer_prepare, -+ .buf_queue = unicam_buffer_queue, -+ .start_streaming = unicam_start_streaming, -+ .stop_streaming = unicam_stop_streaming, -+}; -+ -+/* unicam capture driver file operations */ -+static const struct v4l2_file_operations unicam_fops = { -+ .owner = THIS_MODULE, -+ .open = v4l2_fh_open, -+ .release = vb2_fop_release, -+ .read = vb2_fop_read, -+ .poll = vb2_fop_poll, -+ .unlocked_ioctl = video_ioctl2, -+ .mmap = vb2_fop_mmap, -+}; -+ -+/* unicam capture ioctl operations */ -+static const struct v4l2_ioctl_ops unicam_ioctl_ops = { -+ .vidioc_querycap = unicam_querycap, -+ .vidioc_enum_fmt_vid_cap = unicam_enum_fmt_vid_cap, -+ .vidioc_g_fmt_vid_cap = unicam_g_fmt_vid_cap, -+ .vidioc_s_fmt_vid_cap = unicam_s_fmt_vid_cap, -+ .vidioc_try_fmt_vid_cap = unicam_try_fmt_vid_cap, -+ -+ .vidioc_enum_input = unicam_enum_input, -+ .vidioc_g_input = unicam_g_input, -+ .vidioc_s_input = unicam_s_input, -+ -+ .vidioc_querystd = unicam_querystd, -+ .vidioc_s_std = unicam_s_std, -+ .vidioc_g_std = unicam_g_std, -+ -+ .vidioc_g_edid = unicam_g_edid, -+ .vidioc_s_edid = unicam_s_edid, -+ -+ .vidioc_s_dv_timings = unicam_s_dv_timings, -+ .vidioc_g_dv_timings = unicam_g_dv_timings, -+ .vidioc_query_dv_timings = unicam_query_dv_timings, -+ .vidioc_enum_dv_timings = unicam_enum_dv_timings, -+ .vidioc_dv_timings_cap = unicam_dv_timings_cap, -+ -+ .vidioc_reqbufs = vb2_ioctl_reqbufs, -+ .vidioc_create_bufs = vb2_ioctl_create_bufs, -+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf, -+ .vidioc_querybuf = vb2_ioctl_querybuf, -+ .vidioc_qbuf = vb2_ioctl_qbuf, -+ .vidioc_dqbuf = vb2_ioctl_dqbuf, -+ .vidioc_expbuf = vb2_ioctl_expbuf, -+ .vidioc_streamon = vb2_ioctl_streamon, -+ .vidioc_streamoff = vb2_ioctl_streamoff, -+ -+ .vidioc_log_status = unicam_log_status, -+ .vidioc_subscribe_event = unicam_subscribe_event, -+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -+}; -+ -+/* -+ * Adds an entry to the active_fmts array -+ * Returns non-zero if attempting to write off the end of the array. -+ */ -+static int unicam_add_active_format(struct unicam_device *unicam, -+ const struct unicam_fmt *fmt) -+{ -+ //Ensure we don't run off the end of the array. -+ if (unicam->num_active_fmt >= MAX_POSSIBLE_PIX_FMTS) -+ return 1; -+ -+ unicam->active_fmts[unicam->num_active_fmt] = *fmt; -+ unicam_dbg(2, unicam, -+ "matched fourcc: " V4L2_FOURCC_CONV ": code: %04x idx: %d\n", -+ V4L2_FOURCC_CONV_ARGS(fmt->fourcc), -+ fmt->code, unicam->num_active_fmt); -+ unicam->num_active_fmt++; -+ -+ return 0; -+} -+ -+static int -+unicam_async_bound(struct v4l2_async_notifier *notifier, -+ struct v4l2_subdev *subdev, -+ struct v4l2_async_subdev *asd) -+{ -+ struct unicam_device *unicam = container_of(notifier->v4l2_dev, -+ struct unicam_device, v4l2_dev); -+ struct v4l2_subdev_mbus_code_enum mbus_code; -+ int ret = 0; -+ int j; -+ -+ if (unicam->sensor) { -+ unicam_info(unicam, "Rejecting subdev %s (Already set!!)", -+ subdev->name); -+ return 0; -+ } -+ -+ unicam->sensor = subdev; -+ unicam_dbg(1, unicam, "Using sensor %s for capture\n", subdev->name); -+ -+ /* Enumerate sub device formats and enable all matching local formats */ -+ unicam->num_active_fmt = 0; -+ unicam_dbg(2, unicam, "Get supported formats...\n"); -+ for (j = 0; ret != -EINVAL && ret != -ENOIOCTLCMD; ++j) { -+ const struct unicam_fmt *fmt = NULL; -+ int k; -+ -+ memset(&mbus_code, 0, sizeof(mbus_code)); -+ mbus_code.index = j; -+ ret = v4l2_subdev_call(subdev, pad, enum_mbus_code, -+ NULL, &mbus_code); -+ if (ret < 0) { -+ unicam_dbg(2, unicam, -+ "subdev->enum_mbus_code idx %d returned %d - continue\n", -+ j, ret); -+ continue; -+ } -+ -+ unicam_dbg(2, unicam, "subdev %s: code: %04x idx: %d\n", -+ subdev->name, mbus_code.code, j); -+ -+ for (k = 0; k < ARRAY_SIZE(formats); k++) { -+ if (mbus_code.code == formats[k].code) { -+ fmt = &formats[k]; -+ break; -+ } -+ } -+ unicam_dbg(2, unicam, "fmt %04x returned as %p, V4L2 FOURCC %04x, csi_dt %02X\n", -+ mbus_code.code, fmt, fmt ? fmt->fourcc : 0, -+ fmt ? fmt->csi_dt : 0); -+ if (fmt) { -+ if (unicam_add_active_format(unicam, fmt)) { -+ unicam_dbg(1, unicam, "Active fmt list truncated\n"); -+ break; -+ } -+ } -+ } -+ unicam_dbg(2, unicam, -+ "Done all formats\n"); -+ dump_active_formats(unicam); -+ -+ return 0; -+} -+ -+static int unicam_probe_complete(struct unicam_device *unicam) -+{ -+ struct video_device *vdev; -+ struct vb2_queue *q; -+ struct v4l2_mbus_framefmt mbus_fmt = {0}; -+ const struct unicam_fmt *fmt; -+ int ret; -+ -+ v4l2_set_subdev_hostdata(unicam->sensor, unicam); -+ -+ unicam->v4l2_dev.notify = unicam_notify; -+ -+ unicam->sensor_config = v4l2_subdev_alloc_pad_config(unicam->sensor); -+ if (!unicam->sensor_config) -+ return -ENOMEM; -+ -+ ret = __subdev_get_format(unicam, &mbus_fmt); -+ if (ret) { -+ unicam_err(unicam, "Failed to get_format - ret %d\n", ret); -+ return ret; -+ } -+ -+ fmt = find_format_by_code(unicam, mbus_fmt.code); -+ if (!fmt) { -+ /* Default image format not valid. Choose first active fmt. */ -+ fmt = &unicam->active_fmts[0]; -+ mbus_fmt.code = fmt->code; -+ ret = __subdev_set_format(unicam, &mbus_fmt); -+ if (ret) -+ return -EINVAL; -+ } -+ if (mbus_fmt.field != V4L2_FIELD_NONE) { -+ /* Interlaced not supported - disable it now. */ -+ mbus_fmt.field = V4L2_FIELD_NONE; -+ ret = __subdev_set_format(unicam, &mbus_fmt); -+ if (ret) -+ return -EINVAL; -+ } -+ -+ unicam->fmt = fmt; -+ unicam->v_fmt.fmt.pix.pixelformat = fmt->fourcc; -+ -+ /* Read current subdev format */ -+ unicam_reset_format(unicam); -+ -+ if (v4l2_subdev_has_op(unicam->sensor, video, s_std)) { -+ v4l2_std_id tvnorms; -+ -+ if (WARN_ON(!v4l2_subdev_has_op(unicam->sensor, video, -+ g_tvnorms))) -+ /* -+ * Subdevice should not advertise s_std but not -+ * g_tvnorms -+ */ -+ return -EINVAL; -+ -+ ret = v4l2_subdev_call(unicam->sensor, video, -+ g_tvnorms, &tvnorms); -+ if (WARN_ON(ret)) -+ return -EINVAL; -+ unicam->video_dev.tvnorms |= tvnorms; -+ } -+ -+ spin_lock_init(&unicam->dma_queue_lock); -+ mutex_init(&unicam->lock); -+ -+ /* Add controls from the subdevice */ -+ ret = v4l2_ctrl_add_handler(&unicam->ctrl_handler, -+ unicam->sensor->ctrl_handler, NULL); -+ if (ret < 0) -+ return ret; -+ -+ q = &unicam->buffer_queue; -+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; -+ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ; -+ q->drv_priv = unicam; -+ q->ops = &unicam_video_qops; -+ q->mem_ops = &vb2_dma_contig_memops; -+ q->buf_struct_size = sizeof(struct unicam_buffer); -+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; -+ q->lock = &unicam->lock; -+ q->min_buffers_needed = 2; -+ q->dev = &unicam->pdev->dev; -+ -+ ret = vb2_queue_init(q); -+ if (ret) { -+ unicam_err(unicam, "vb2_queue_init() failed\n"); -+ return ret; -+ } -+ -+ INIT_LIST_HEAD(&unicam->dma_queue.active); -+ -+ vdev = &unicam->video_dev; -+ strlcpy(vdev->name, UNICAM_MODULE_NAME, sizeof(vdev->name)); -+ vdev->release = video_device_release_empty; -+ vdev->fops = &unicam_fops; -+ vdev->ioctl_ops = &unicam_ioctl_ops; -+ vdev->v4l2_dev = &unicam->v4l2_dev; -+ vdev->vfl_dir = VFL_DIR_RX; -+ vdev->queue = q; -+ vdev->lock = &unicam->lock; -+ vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | -+ V4L2_CAP_READWRITE; -+ -+ /* If the source has no controls then remove our ctrl handler. */ -+ if (list_empty(&unicam->ctrl_handler.ctrls)) -+ unicam->v4l2_dev.ctrl_handler = NULL; -+ -+ video_set_drvdata(vdev, unicam); -+ ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); -+ if (ret) { -+ unicam_err(unicam, "Unable to register video device.\n"); -+ return ret; -+ } -+ -+ if (!v4l2_subdev_has_op(unicam->sensor, video, s_std)) { -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_STD); -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_STD); -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUMSTD); -+ } -+ if (!v4l2_subdev_has_op(unicam->sensor, video, querystd)) -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERYSTD); -+ if (!v4l2_subdev_has_op(unicam->sensor, video, s_dv_timings)) { -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_EDID); -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_EDID); -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_DV_TIMINGS_CAP); -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_DV_TIMINGS); -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_DV_TIMINGS); -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUM_DV_TIMINGS); -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERY_DV_TIMINGS); -+ } -+ -+ ret = v4l2_device_register_subdev_nodes(&unicam->v4l2_dev); -+ if (ret) { -+ unicam_err(unicam, -+ "Unable to register subdev nodes.\n"); -+ video_unregister_device(&unicam->video_dev); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int unicam_async_complete(struct v4l2_async_notifier *notifier) -+{ -+ struct unicam_device *unicam = container_of(notifier->v4l2_dev, -+ struct unicam_device, v4l2_dev); -+ -+ return unicam_probe_complete(unicam); -+} -+ -+static const struct v4l2_async_notifier_operations unicam_async_ops = { -+ .bound = unicam_async_bound, -+ .complete = unicam_async_complete, -+}; -+ -+static int of_unicam_connect_subdevs(struct unicam_device *dev) -+{ -+ struct platform_device *pdev = dev->pdev; -+ struct device_node *parent, *ep_node = NULL, *remote_ep = NULL, -+ *sensor_node = NULL; -+ struct v4l2_fwnode_endpoint *ep; -+ struct v4l2_async_subdev *asd; -+ struct v4l2_async_subdev **subdevs = NULL; -+ unsigned int peripheral_data_lanes; -+ int ret = -EINVAL; -+ unsigned int lane; -+ -+ parent = pdev->dev.of_node; -+ -+ asd = &dev->asd; -+ ep = &dev->endpoint; -+ -+ ep_node = of_graph_get_next_endpoint(parent, NULL); -+ if (!ep_node) { -+ unicam_dbg(3, dev, "can't get next endpoint\n"); -+ goto cleanup_exit; -+ } -+ -+ unicam_dbg(3, dev, "ep_node is %s\n", ep_node->name); -+ -+ v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), ep); -+ -+ for (lane = 0; lane < ep->bus.mipi_csi2.num_data_lanes; lane++) { -+ if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) { -+ unicam_err(dev, "Local endpoint - data lane reordering not supported\n"); -+ goto cleanup_exit; -+ } -+ } -+ -+ peripheral_data_lanes = ep->bus.mipi_csi2.num_data_lanes; -+ -+ sensor_node = of_graph_get_remote_port_parent(ep_node); -+ if (!sensor_node) { -+ unicam_dbg(3, dev, "can't get remote parent\n"); -+ goto cleanup_exit; -+ } -+ unicam_dbg(3, dev, "sensor_node is %s\n", sensor_node->name); -+ asd->match_type = V4L2_ASYNC_MATCH_FWNODE; -+ asd->match.fwnode = of_fwnode_handle(sensor_node); -+ -+ remote_ep = of_graph_get_remote_endpoint(ep_node); -+ if (!remote_ep) { -+ unicam_dbg(3, dev, "can't get remote-endpoint\n"); -+ goto cleanup_exit; -+ } -+ unicam_dbg(3, dev, "remote_ep is %s\n", remote_ep->name); -+ v4l2_fwnode_endpoint_parse(of_fwnode_handle(remote_ep), ep); -+ unicam_dbg(3, dev, "parsed remote_ep to endpoint. nr_of_link_frequencies %u, bus_type %u\n", -+ ep->nr_of_link_frequencies, ep->bus_type); -+ -+ switch (ep->bus_type) { -+ case V4L2_MBUS_CSI2: -+ if (ep->bus.mipi_csi2.num_data_lanes > -+ peripheral_data_lanes) { -+ unicam_err(dev, "Subdevice %s wants too many data lanes (%u > %u)\n", -+ sensor_node->name, -+ ep->bus.mipi_csi2.num_data_lanes, -+ peripheral_data_lanes); -+ goto cleanup_exit; -+ } -+ for (lane = 0; -+ lane < ep->bus.mipi_csi2.num_data_lanes; -+ lane++) { -+ if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) { -+ unicam_err(dev, "Subdevice %s - incompatible data lane config\n", -+ sensor_node->name); -+ goto cleanup_exit; -+ } -+ } -+ dev->max_data_lanes = ep->bus.mipi_csi2.num_data_lanes; -+ dev->bus_flags = ep->bus.mipi_csi2.flags; -+ break; -+ case V4L2_MBUS_CCP2: -+ if (ep->bus.mipi_csi1.clock_lane != 0 || -+ ep->bus.mipi_csi1.data_lane != 1) { -+ unicam_err(dev, "Subdevice %s incompatible lane config\n", -+ sensor_node->name); -+ goto cleanup_exit; -+ } -+ dev->max_data_lanes = 1; -+ dev->bus_flags = ep->bus.mipi_csi1.strobe; -+ break; -+ default: -+ /* Unsupported bus type */ -+ unicam_err(dev, "sub-device %s is not a CSI2 or CCP2 device %d\n", -+ sensor_node->name, ep->bus_type); -+ goto cleanup_exit; -+ } -+ -+ /* Store bus type - CSI2 or CCP2 */ -+ dev->bus_type = ep->bus_type; -+ unicam_dbg(3, dev, "bus_type is %d\n", dev->bus_type); -+ -+ /* Store Virtual Channel number */ -+ dev->virtual_channel = ep->base.id; -+ -+ unicam_dbg(3, dev, "v4l2-endpoint: %s\n", -+ dev->bus_type == V4L2_MBUS_CSI2 ? "CSI2" : "CCP2"); -+ unicam_dbg(3, dev, "Virtual Channel=%d\n", dev->virtual_channel); -+ if (dev->bus_type == V4L2_MBUS_CSI2) -+ unicam_dbg(3, dev, "flags=0x%08x\n", ep->bus.mipi_csi2.flags); -+ unicam_dbg(3, dev, "num_data_lanes=%d\n", dev->max_data_lanes); -+ -+ unicam_dbg(1, dev, "found sub-device %s\n", sensor_node->name); -+ -+ subdevs = devm_kzalloc(&dev->pdev->dev, sizeof(*subdevs), GFP_KERNEL); -+ if (!subdevs) { -+ ret = -ENOMEM; -+ goto cleanup_exit; -+ } -+ subdevs[0] = asd; -+ dev->notifier.subdevs = subdevs; -+ dev->notifier.num_subdevs = 1; -+ dev->notifier.ops = &unicam_async_ops; -+ ret = v4l2_async_notifier_register(&dev->v4l2_dev, -+ &dev->notifier); -+ if (ret) { -+ unicam_err(dev, "Error registering async notifier - ret %d\n", -+ ret); -+ ret = -EINVAL; -+ } -+ -+cleanup_exit: -+ if (remote_ep) -+ of_node_put(remote_ep); -+ if (sensor_node) -+ of_node_put(sensor_node); -+ if (ep_node) -+ of_node_put(ep_node); -+ -+ return ret; -+} -+ -+static int unicam_probe(struct platform_device *pdev) -+{ -+ struct unicam_cfg *unicam_cfg; -+ struct unicam_device *unicam; -+ struct v4l2_ctrl_handler *hdl; -+ struct resource *res; -+ int ret; -+ -+ unicam = devm_kzalloc(&pdev->dev, sizeof(*unicam), GFP_KERNEL); -+ if (!unicam) -+ return -ENOMEM; -+ -+ unicam->pdev = pdev; -+ unicam_cfg = &unicam->cfg; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ unicam_cfg->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(unicam_cfg->base)) { -+ unicam_err(unicam, "Failed to get main io block\n"); -+ return PTR_ERR(unicam_cfg->base); -+ } -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ unicam_cfg->clk_gate_base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(unicam_cfg->clk_gate_base)) { -+ unicam_err(unicam, "Failed to get 2nd io block\n"); -+ return PTR_ERR(unicam_cfg->clk_gate_base); -+ } -+ -+ unicam->clock = devm_clk_get(&pdev->dev, "lp"); -+ if (IS_ERR(unicam->clock)) { -+ unicam_err(unicam, "Failed to get clock\n"); -+ return PTR_ERR(unicam->clock); -+ } -+ -+ ret = platform_get_irq(pdev, 0); -+ if (ret <= 0) { -+ dev_err(&pdev->dev, "No IRQ resource\n"); -+ return -ENODEV; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, ret, unicam_isr, 0, -+ "unicam_capture0", unicam); -+ if (ret) { -+ dev_err(&pdev->dev, "Unable to request interrupt\n"); -+ return -EINVAL; -+ } -+ -+ ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev); -+ if (ret) { -+ unicam_err(unicam, -+ "Unable to register v4l2 device.\n"); -+ return ret; -+ } -+ -+ /* Reserve space for the controls */ -+ hdl = &unicam->ctrl_handler; -+ ret = v4l2_ctrl_handler_init(hdl, 16); -+ if (ret < 0) -+ goto probe_out_v4l2_unregister; -+ unicam->v4l2_dev.ctrl_handler = hdl; -+ -+ /* set the driver data in platform device */ -+ platform_set_drvdata(pdev, unicam); -+ -+ ret = of_unicam_connect_subdevs(unicam); -+ if (ret) { -+ dev_err(&pdev->dev, "Failed to connect subdevs\n"); -+ goto free_hdl; -+ } -+ -+ /* Enable the block power domain */ -+ pm_runtime_enable(&pdev->dev); -+ -+ return 0; -+ -+free_hdl: -+ v4l2_ctrl_handler_free(hdl); -+probe_out_v4l2_unregister: -+ v4l2_device_unregister(&unicam->v4l2_dev); -+ return ret; -+} -+ -+static int unicam_remove(struct platform_device *pdev) -+{ -+ struct unicam_device *unicam = platform_get_drvdata(pdev); -+ -+ unicam_dbg(2, unicam, "%s\n", __func__); -+ -+ pm_runtime_disable(&pdev->dev); -+ -+ v4l2_async_notifier_unregister(&unicam->notifier); -+ v4l2_ctrl_handler_free(&unicam->ctrl_handler); -+ v4l2_device_unregister(&unicam->v4l2_dev); -+ video_unregister_device(&unicam->video_dev); -+ if (unicam->sensor_config) -+ v4l2_subdev_free_pad_config(unicam->sensor_config); -+ -+ return 0; -+} -+ -+static const struct of_device_id unicam_of_match[] = { -+ { .compatible = "brcm,bcm2835-unicam", }, -+ { /* sentinel */ }, -+}; -+MODULE_DEVICE_TABLE(of, unicam_of_match); -+ -+static struct platform_driver unicam_driver = { -+ .probe = unicam_probe, -+ .remove = unicam_remove, -+ .driver = { -+ .name = UNICAM_MODULE_NAME, -+ .of_match_table = of_match_ptr(unicam_of_match), -+ }, -+}; -+ -+module_platform_driver(unicam_driver); -+ -+MODULE_AUTHOR("Dave Stevenson "); -+MODULE_DESCRIPTION("BCM2835 Unicam driver"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(UNICAM_VERSION); ---- /dev/null -+++ b/drivers/media/platform/bcm2835/vc4-regs-unicam.h -@@ -0,0 +1,266 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+/* -+ * Copyright (C) 2017 Raspberry Pi Trading. -+ * Dave Stevenson -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS -+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN -+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -+ * SOFTWARE. -+ */ -+ -+#ifndef VC4_REGS_UNICAM_H -+#define VC4_REGS_UNICAM_H -+ -+/* -+ * The following values are taken from files found within the code drop -+ * made by Broadcom for the BCM21553 Graphics Driver, predominantly in -+ * brcm_usrlib/dag/vmcsx/vcinclude/hardware_vc4.h. -+ * They have been modified to be only the register offset. -+ */ -+#define UNICAM_CTRL 0x000 -+#define UNICAM_STA 0x004 -+#define UNICAM_ANA 0x008 -+#define UNICAM_PRI 0x00c -+#define UNICAM_CLK 0x010 -+#define UNICAM_CLT 0x014 -+#define UNICAM_DAT0 0x018 -+#define UNICAM_DAT1 0x01c -+#define UNICAM_DAT2 0x020 -+#define UNICAM_DAT3 0x024 -+#define UNICAM_DLT 0x028 -+#define UNICAM_CMP0 0x02c -+#define UNICAM_CMP1 0x030 -+#define UNICAM_CAP0 0x034 -+#define UNICAM_CAP1 0x038 -+#define UNICAM_ICTL 0x100 -+#define UNICAM_ISTA 0x104 -+#define UNICAM_IDI0 0x108 -+#define UNICAM_IPIPE 0x10c -+#define UNICAM_IBSA0 0x110 -+#define UNICAM_IBEA0 0x114 -+#define UNICAM_IBLS 0x118 -+#define UNICAM_IBWP 0x11c -+#define UNICAM_IHWIN 0x120 -+#define UNICAM_IHSTA 0x124 -+#define UNICAM_IVWIN 0x128 -+#define UNICAM_IVSTA 0x12c -+#define UNICAM_ICC 0x130 -+#define UNICAM_ICS 0x134 -+#define UNICAM_IDC 0x138 -+#define UNICAM_IDPO 0x13c -+#define UNICAM_IDCA 0x140 -+#define UNICAM_IDCD 0x144 -+#define UNICAM_IDS 0x148 -+#define UNICAM_DCS 0x200 -+#define UNICAM_DBSA0 0x204 -+#define UNICAM_DBEA0 0x208 -+#define UNICAM_DBWP 0x20c -+#define UNICAM_DBCTL 0x300 -+#define UNICAM_IBSA1 0x304 -+#define UNICAM_IBEA1 0x308 -+#define UNICAM_IDI1 0x30c -+#define UNICAM_DBSA1 0x310 -+#define UNICAM_DBEA1 0x314 -+#define UNICAM_MISC 0x400 -+ -+/* -+ * The following bitmasks are from the kernel released by Broadcom -+ * for Android - https://android.googlesource.com/kernel/bcm/ -+ * The Rhea, Hawaii, and Java chips all contain the same VideoCore4 -+ * Unicam block as BCM2835, as defined in eg -+ * arch/arm/mach-rhea/include/mach/rdb_A0/brcm_rdb_cam.h and similar. -+ * Values reworked to use the kernel BIT and GENMASK macros. -+ * -+ * Some of the bit mnenomics have been amended to match the datasheet. -+ */ -+/* UNICAM_CTRL Register */ -+#define UNICAM_CPE BIT(0) -+#define UNICAM_MEM BIT(1) -+#define UNICAM_CPR BIT(2) -+#define UNICAM_CPM_MASK GENMASK(3, 3) -+#define UNICAM_CPM_CSI2 0 -+#define UNICAM_CPM_CCP2 1 -+#define UNICAM_SOE BIT(4) -+#define UNICAM_DCM_MASK GENMASK(5, 5) -+#define UNICAM_DCM_STROBE 0 -+#define UNICAM_DCM_DATA 1 -+#define UNICAM_SLS BIT(6) -+#define UNICAM_PFT_MASK GENMASK(11, 8) -+#define UNICAM_OET_MASK GENMASK(20, 12) -+ -+/* UNICAM_STA Register */ -+#define UNICAM_SYN BIT(0) -+#define UNICAM_CS BIT(1) -+#define UNICAM_SBE BIT(2) -+#define UNICAM_PBE BIT(3) -+#define UNICAM_HOE BIT(4) -+#define UNICAM_PLE BIT(5) -+#define UNICAM_SSC BIT(6) -+#define UNICAM_CRCE BIT(7) -+#define UNICAM_OES BIT(8) -+#define UNICAM_IFO BIT(9) -+#define UNICAM_OFO BIT(10) -+#define UNICAM_BFO BIT(11) -+#define UNICAM_DL BIT(12) -+#define UNICAM_PS BIT(13) -+#define UNICAM_IS BIT(14) -+#define UNICAM_PI0 BIT(15) -+#define UNICAM_PI1 BIT(16) -+#define UNICAM_FSI_S BIT(17) -+#define UNICAM_FEI_S BIT(18) -+#define UNICAM_LCI_S BIT(19) -+#define UNICAM_BUF0_RDY BIT(20) -+#define UNICAM_BUF0_NO BIT(21) -+#define UNICAM_BUF1_RDY BIT(22) -+#define UNICAM_BUF1_NO BIT(23) -+#define UNICAM_DI BIT(24) -+ -+#define UNICAM_STA_MASK_ALL \ -+ (UNICAM_DL + \ -+ UNICAM_SBE + \ -+ UNICAM_PBE + \ -+ UNICAM_HOE + \ -+ UNICAM_PLE + \ -+ UNICAM_SSC + \ -+ UNICAM_CRCE + \ -+ UNICAM_IFO + \ -+ UNICAM_OFO + \ -+ UNICAM_PS + \ -+ UNICAM_PI0 + \ -+ UNICAM_PI1) -+ -+/* UNICAM_ANA Register */ -+#define UNICAM_APD BIT(0) -+#define UNICAM_BPD BIT(1) -+#define UNICAM_AR BIT(2) -+#define UNICAM_DDL BIT(3) -+#define UNICAM_CTATADJ_MASK GENMASK(7, 4) -+#define UNICAM_PTATADJ_MASK GENMASK(11, 8) -+ -+/* UNICAM_PRI Register */ -+#define UNICAM_PE BIT(0) -+#define UNICAM_PT_MASK GENMASK(2, 1) -+#define UNICAM_NP_MASK GENMASK(7, 4) -+#define UNICAM_PP_MASK GENMASK(11, 8) -+#define UNICAM_BS_MASK GENMASK(15, 12) -+#define UNICAM_BL_MASK GENMASK(17, 16) -+ -+/* UNICAM_CLK Register */ -+#define UNICAM_CLE BIT(0) -+#define UNICAM_CLPD BIT(1) -+#define UNICAM_CLLPE BIT(2) -+#define UNICAM_CLHSE BIT(3) -+#define UNICAM_CLTRE BIT(4) -+#define UNICAM_CLAC_MASK GENMASK(8, 5) -+#define UNICAM_CLSTE BIT(29) -+ -+/* UNICAM_CLT Register */ -+#define UNICAM_CLT1_MASK GENMASK(7, 0) -+#define UNICAM_CLT2_MASK GENMASK(15, 8) -+ -+/* UNICAM_DATn Registers */ -+#define UNICAM_DLE BIT(0) -+#define UNICAM_DLPD BIT(1) -+#define UNICAM_DLLPE BIT(2) -+#define UNICAM_DLHSE BIT(3) -+#define UNICAM_DLTRE BIT(4) -+#define UNICAM_DLSM BIT(5) -+#define UNICAM_DLFO BIT(28) -+#define UNICAM_DLSTE BIT(29) -+ -+#define UNICAM_DAT_MASK_ALL (UNICAM_DLSTE + UNICAM_DLFO) -+ -+/* UNICAM_DLT Register */ -+#define UNICAM_DLT1_MASK GENMASK(7, 0) -+#define UNICAM_DLT2_MASK GENMASK(15, 8) -+#define UNICAM_DLT3_MASK GENMASK(23, 16) -+ -+/* UNICAM_ICTL Register */ -+#define UNICAM_FSIE BIT(0) -+#define UNICAM_FEIE BIT(1) -+#define UNICAM_IBOB BIT(2) -+#define UNICAM_FCM BIT(3) -+#define UNICAM_TFC BIT(4) -+#define UNICAM_LIP_MASK GENMASK(6, 5) -+#define UNICAM_LCIE_MASK GENMASK(28, 16) -+ -+/* UNICAM_IDI0/1 Register */ -+#define UNICAM_ID0_MASK GENMASK(7, 0) -+#define UNICAM_ID1_MASK GENMASK(15, 8) -+#define UNICAM_ID2_MASK GENMASK(23, 16) -+#define UNICAM_ID3_MASK GENMASK(31, 24) -+ -+/* UNICAM_ISTA Register */ -+#define UNICAM_FSI BIT(0) -+#define UNICAM_FEI BIT(1) -+#define UNICAM_LCI BIT(2) -+ -+#define UNICAM_ISTA_MASK_ALL (UNICAM_FSI + UNICAM_FEI + UNICAM_LCI) -+ -+/* UNICAM_IPIPE Register */ -+#define UNICAM_PUM_MASK GENMASK(2, 0) -+ /* Unpacking modes */ -+ #define UNICAM_PUM_NONE 0 -+ #define UNICAM_PUM_UNPACK6 1 -+ #define UNICAM_PUM_UNPACK7 2 -+ #define UNICAM_PUM_UNPACK8 3 -+ #define UNICAM_PUM_UNPACK10 4 -+ #define UNICAM_PUM_UNPACK12 5 -+ #define UNICAM_PUM_UNPACK14 6 -+ #define UNICAM_PUM_UNPACK16 7 -+#define UNICAM_DDM_MASK GENMASK(6, 3) -+#define UNICAM_PPM_MASK GENMASK(9, 7) -+ /* Packing modes */ -+ #define UNICAM_PPM_NONE 0 -+ #define UNICAM_PPM_PACK8 1 -+ #define UNICAM_PPM_PACK10 2 -+ #define UNICAM_PPM_PACK12 3 -+ #define UNICAM_PPM_PACK14 4 -+ #define UNICAM_PPM_PACK16 5 -+#define UNICAM_DEM_MASK GENMASK(11, 10) -+#define UNICAM_DEBL_MASK GENMASK(14, 12) -+#define UNICAM_ICM_MASK GENMASK(16, 15) -+#define UNICAM_IDM_MASK GENMASK(17, 17) -+ -+/* UNICAM_ICC Register */ -+#define UNICAM_ICFL_MASK GENMASK(4, 0) -+#define UNICAM_ICFH_MASK GENMASK(9, 5) -+#define UNICAM_ICST_MASK GENMASK(12, 10) -+#define UNICAM_ICLT_MASK GENMASK(15, 13) -+#define UNICAM_ICLL_MASK GENMASK(31, 16) -+ -+/* UNICAM_DCS Register */ -+#define UNICAM_DIE BIT(0) -+#define UNICAM_DIM BIT(1) -+#define UNICAM_DBOB BIT(3) -+#define UNICAM_FDE BIT(4) -+#define UNICAM_LDP BIT(5) -+#define UNICAM_EDL_MASK GENMASK(15, 8) -+ -+/* UNICAM_DBCTL Register */ -+#define UNICAM_DBEN BIT(0) -+#define UNICAM_BUF0_IE BIT(1) -+#define UNICAM_BUF1_IE BIT(2) -+ -+/* UNICAM_CMP[0,1] register */ -+#define UNICAM_PCE BIT(31) -+#define UNICAM_GI BIT(9) -+#define UNICAM_CPH BIT(8) -+#define UNICAM_PCVC_MASK GENMASK(7, 6) -+#define UNICAM_PCDT_MASK GENMASK(5, 0) -+ -+/* UNICAM_MISC register */ -+#define UNICAM_FL0 BIT(6) -+#define UNICAM_FL1 BIT(9) -+ -+#endif diff --git a/target/linux/brcm2708/patches-4.19/950-0198-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch b/target/linux/brcm2708/patches-4.19/950-0198-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch new file mode 100644 index 0000000000..c67acaa50d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0198-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch @@ -0,0 +1,83 @@ +From a3c59bad71de2b3c09a25fd6ce5e3632c33c4bba Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 26 Nov 2018 19:46:58 +0000 +Subject: [PATCH] net: lan78xx: Support auto-downshift to 100Mb/s + +Ethernet cables with faulty or missing pairs (specifically pairs C and +D) allow auto-negotiation to 1000Mbs, but do not support the successful +establishment of a link. Add a DT property, "microchip,downshift-after", +to configure the number of auto-negotiation failures after which it +falls back to 100Mbs. Valid values are 2, 3, 4, 5 and 0, where 0 means +never downshift. + +Signed-off-by: Phil Elwell +--- + drivers/net/phy/microchip.c | 32 ++++++++++++++++++++++++++++++++ + include/linux/microchipphy.h | 8 ++++++++ + 2 files changed, 40 insertions(+) + +--- a/drivers/net/phy/microchip.c ++++ b/drivers/net/phy/microchip.c +@@ -228,6 +228,7 @@ static int lan88xx_probe(struct phy_devi + struct device *dev = &phydev->mdio.dev; + struct lan88xx_priv *priv; + u32 led_modes[4]; ++ u32 downshift_after = 0; + int len; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); +@@ -257,6 +258,37 @@ static int lan88xx_probe(struct phy_devi + return -EINVAL; + } + ++ if (!of_property_read_u32(dev->of_node, ++ "microchip,downshift-after", ++ &downshift_after)) { ++ u32 mask = LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK; ++ u32 val = LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT; ++ ++ switch (downshift_after) { ++ case 2: ++ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2; ++ break; ++ case 3: ++ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3; ++ break; ++ case 4: ++ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4; ++ break; ++ case 5: ++ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5; ++ break; ++ case 0: ++ /* Disable completely */ ++ mask = LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT; ++ val = 0; ++ break; ++ default: ++ return -EINVAL; ++ } ++ (void)phy_modify_paged(phydev, 1, LAN78XX_PHY_CTRL3, ++ mask, val); ++ } ++ + /* these values can be used to identify internal PHY */ + priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID); + priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV); +--- a/include/linux/microchipphy.h ++++ b/include/linux/microchipphy.h +@@ -73,6 +73,14 @@ + /* Registers specific to the LAN7800/LAN7850 embedded phy */ + #define LAN78XX_PHY_LED_MODE_SELECT (0x1D) + ++#define LAN78XX_PHY_CTRL3 (0x14) ++#define LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT (0x0010) ++#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK (0x000c) ++#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2 (0x0000) ++#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3 (0x0004) ++#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4 (0x0008) ++#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5 (0x000c) ++ + /* DSP registers */ + #define PHY_ARDENNES_MMD_DEV_3_PHY_CFG (0x806A) + #define PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_ (0x2000) diff --git a/target/linux/brcm2708/patches-4.19/950-0199-dt-bindings-Document-microchip-downshift-after.patch b/target/linux/brcm2708/patches-4.19/950-0199-dt-bindings-Document-microchip-downshift-after.patch new file mode 100644 index 0000000000..f9c1daa212 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0199-dt-bindings-Document-microchip-downshift-after.patch @@ -0,0 +1,24 @@ +From 1654bdce95bd9a99e237b75fdcc0081b232c46b5 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 28 Nov 2018 15:51:41 +0000 +Subject: [PATCH] dt-bindings: Document microchip,downshift-after + +Document the optional downshift-after property of the lan78xx's PHY. + +Signed-off-by: Phil Elwell +--- + Documentation/devicetree/bindings/net/microchip,lan78xx.txt | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt ++++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt +@@ -15,6 +15,9 @@ Optional properties of the embedded PHY: + - microchip,led-modes: a 0..4 element vector, with each element configuring + the operating mode of an LED. Omitted LEDs are turned off. Allowed values + are defined in "include/dt-bindings/net/microchip-lan78xx.h". ++- microchip,downshift-after: sets the number of failed auto-negotiation ++ attempts after which the link is downgraded from 1000BASE-T. Should be one of ++ 2, 3, 4, 5 or 0, where 0 means never downshift. + + Example: + diff --git a/target/linux/brcm2708/patches-4.19/950-0200-ARM-dts-bcm283x-Set-downshift-after-for-Pi-3B.patch b/target/linux/brcm2708/patches-4.19/950-0200-ARM-dts-bcm283x-Set-downshift-after-for-Pi-3B.patch new file mode 100644 index 0000000000..b0613d2ade --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0200-ARM-dts-bcm283x-Set-downshift-after-for-Pi-3B.patch @@ -0,0 +1,24 @@ +From 036c72ed4475afb757af568d40db0973a5dafcc8 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 27 Nov 2018 16:55:14 +0000 +Subject: [PATCH] ARM: dts: bcm283x: Set downshift-after for Pi 3B+ + +Enable the auto-downshift feature on Raspberry Pi 3B+ so that a link +can eventually be established using a cable with pairs C and/or D +missing or broken in a 1000Mbps-capable port. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi ++++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi +@@ -31,6 +31,7 @@ + reg = <1>; + microchip,eee-enabled; + microchip,tx-lpi-timer = <600>; /* non-aggressive*/ ++ microchip,downshift-after = <2>; + microchip,led-modes = < + LAN78XX_LINK_1000_ACTIVITY + LAN78XX_LINK_10_100_ACTIVITY diff --git a/target/linux/brcm2708/patches-4.19/950-0201-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch b/target/linux/brcm2708/patches-4.19/950-0201-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch new file mode 100644 index 0000000000..340f60dd88 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0201-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch @@ -0,0 +1,55 @@ +From 18867d71460b80385146e8d91a23cfb1729858f8 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 27 Nov 2018 16:56:50 +0000 +Subject: [PATCH] BCM270X_DT: Add new Ethernet DT parameters + +Add "eth_downshift_after" DT parameter to allow the delay before the +downshift to be specified. The default is 2 auto-negotiation cycles, +and legal values are 2, 3, 4, 5 and 0 (disabled). + +Add "eth_max_speed" DT parameter as a way of prohibiting 1000Mbps +links. This can be used to avoid the delay until the downshift mechanism +activates. Legal values are 10, 100 and 1000, where the default is +unlimited (effectively 1000Mbps). + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 2 ++ + arch/arm/boot/dts/overlays/README | 9 +++++++++ + 2 files changed, 11 insertions(+) + +--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi ++++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi +@@ -50,5 +50,7 @@ + tx_lpi_timer = <ð_phy>,"microchip,tx-lpi-timer:0"; + eth_led0 = <ð_phy>,"microchip,led-modes:0"; + eth_led1 = <ð_phy>,"microchip,led-modes:4"; ++ eth_downshift_after = <ð_phy>,"microchip,downshift-after"; ++ eth_max_speed = <ð_phy>,"max-speed:0"; + }; + }; +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -98,6 +98,11 @@ Params: + compatible devices (default "on"). See also + "tx_lpi_timer". + ++ eth_downshift_after Set the number of auto-negotiation failures ++ after which the 1000Mbps modes are disabled. ++ Legal values are 2, 3, 4, 5 and 0, where ++ 0 means never downshift (default 2). ++ + eth_led0 Set mode of LED0 (usually orange) (default + "1"). The legal values are: + 0=link/activity 1=link1000/activity +@@ -108,6 +113,10 @@ Params: + eth_led1 Set mode of LED1 (usually green) (default + "6"). See eth_led0 for legal values. + ++ eth_max_speed Set the maximum speed a link is allowed ++ to negotiate. Legal values are 10, 100 and ++ 1000 (default 1000). ++ + i2c_arm Set to "on" to enable the ARM's i2c interface + (default "off") + diff --git a/target/linux/brcm2708/patches-4.19/950-0201-media-adv7180-Nasty-hack-to-allow-input-selection.patch b/target/linux/brcm2708/patches-4.19/950-0201-media-adv7180-Nasty-hack-to-allow-input-selection.patch deleted file mode 100644 index 1f039f1f83..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0201-media-adv7180-Nasty-hack-to-allow-input-selection.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 34c4ee6f5d7143f6c8be604715f9b52b7540e38d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 15:00:04 +0000 -Subject: [PATCH 201/806] media: adv7180: Nasty hack to allow input selection. - -Whilst the adv7180 driver support s_routing, nothing else -does, and there is a missing lump of framework code to -define the mapping from connectors on a board to the inputs -they represent on the ADV7180. - -Add a nasty hack to take a module parameter that is passed in -to s_routing on any call to G_STD, or S_STD (or subdev -g_input_status call). - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/adv7180.c | 30 ++++++++++++++++++++++++++++-- - 1 file changed, 28 insertions(+), 2 deletions(-) - ---- a/drivers/media/i2c/adv7180.c -+++ b/drivers/media/i2c/adv7180.c -@@ -189,6 +189,10 @@ - - #define V4L2_CID_ADV_FAST_SWITCH (V4L2_CID_USER_ADV7180_BASE + 0x00) - -+static int dbg_input; -+module_param(dbg_input, int, 0644); -+MODULE_PARM_DESC(dbg_input, "Input number (0-31)"); -+ - struct adv7180_state; - - #define ADV7180_FLAG_RESET_POWERED BIT(0) -@@ -405,10 +409,24 @@ out: - return ret; - } - -+static void adv7180_check_input(struct v4l2_subdev *sd) -+{ -+ struct adv7180_state *state = to_state(sd); -+ -+ if (state->input != dbg_input) -+ if (adv7180_s_routing(sd, dbg_input, 0, 0)) -+ /* Failed - reset dbg_input */ -+ dbg_input = state->input; -+} -+ - static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status) - { - struct adv7180_state *state = to_state(sd); -- int ret = mutex_lock_interruptible(&state->mutex); -+ int ret; -+ -+ adv7180_check_input(sd); -+ -+ ret = mutex_lock_interruptible(&state->mutex); - if (ret) - return ret; - -@@ -434,7 +452,11 @@ static int adv7180_program_std(struct ad - static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std) - { - struct adv7180_state *state = to_state(sd); -- int ret = mutex_lock_interruptible(&state->mutex); -+ int ret; -+ -+ adv7180_check_input(sd); -+ -+ ret = mutex_lock_interruptible(&state->mutex); - - if (ret) - return ret; -@@ -456,6 +478,8 @@ static int adv7180_g_std(struct v4l2_sub - { - struct adv7180_state *state = to_state(sd); - -+ adv7180_check_input(sd); -+ - *norm = state->curr_norm; - - return 0; -@@ -810,6 +834,8 @@ static int adv7180_s_stream(struct v4l2_ - return 0; - } - -+ adv7180_check_input(sd); -+ - /* Must wait until querystd released the lock */ - ret = mutex_lock_interruptible(&state->mutex); - if (ret) diff --git a/target/linux/brcm2708/patches-4.19/950-0202-BCM270X_DT-Mark-eth_downshift_after-as-an-integer.patch b/target/linux/brcm2708/patches-4.19/950-0202-BCM270X_DT-Mark-eth_downshift_after-as-an-integer.patch new file mode 100644 index 0000000000..8faa68c19e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0202-BCM270X_DT-Mark-eth_downshift_after-as-an-integer.patch @@ -0,0 +1,21 @@ +From 3cc51f4d633b33f732a52d1ec2b041a28b55c7d5 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 29 Nov 2018 16:00:22 +0000 +Subject: [PATCH] BCM270X_DT: Mark eth_downshift_after as an integer + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi ++++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi +@@ -50,7 +50,7 @@ + tx_lpi_timer = <ð_phy>,"microchip,tx-lpi-timer:0"; + eth_led0 = <ð_phy>,"microchip,led-modes:0"; + eth_led1 = <ð_phy>,"microchip,led-modes:4"; +- eth_downshift_after = <ð_phy>,"microchip,downshift-after"; ++ eth_downshift_after = <ð_phy>,"microchip,downshift-after:0"; + eth_max_speed = <ð_phy>,"max-speed:0"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0202-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch b/target/linux/brcm2708/patches-4.19/950-0202-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch deleted file mode 100644 index d0e8915a3b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0202-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch +++ /dev/null @@ -1,202 +0,0 @@ -From 32282fb05466e5d5767b598e60136ef584847dc4 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 15:00:20 +0000 -Subject: [PATCH 202/806] BCM283x DT: Add CSI nodes to the device tree. - -Adds CSI nodes to all the upstream device tree configs - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-a.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-zero.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi.dtsi | 8 ++++++ - arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 + - arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 + - arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi | 8 ++++++ - arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi | 8 ++++++ - arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi | 8 ++++++ - arch/arm/boot/dts/bcm283x.dtsi | 26 +++++++++++++++++++ - .../dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi | 1 + - 14 files changed, 67 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi - create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi - create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi - create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi - ---- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts -@@ -3,6 +3,7 @@ - #include "bcm2835.dtsi" - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; ---- a/arch/arm/boot/dts/bcm2835-rpi-a.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts -@@ -3,6 +3,7 @@ - #include "bcm2835.dtsi" - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-a", "brcm,bcm2835"; ---- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -@@ -4,6 +4,7 @@ - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; ---- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -@@ -4,6 +4,7 @@ - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-smsc9512.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; ---- a/arch/arm/boot/dts/bcm2835-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts -@@ -4,6 +4,7 @@ - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-smsc9512.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-b", "brcm,bcm2835"; ---- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts -@@ -13,6 +13,7 @@ - #include "bcm2835.dtsi" - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-usb-otg.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-zero", "brcm,bcm2835"; ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -108,3 +108,11 @@ - &dsi1 { - power-domains = <&power RPI_POWER_DOMAIN_DSI1>; - }; -+ -+&csi0 { -+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; -+}; -+ -+&csi1 { -+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; -+}; ---- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -@@ -4,6 +4,7 @@ - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; ---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -@@ -4,6 +4,7 @@ - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi -@@ -0,0 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+&csi0 { -+ port { -+ endpoint { -+ data-lanes = <1 2>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi -@@ -0,0 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+&csi1 { -+ port { -+ endpoint { -+ data-lanes = <1 2>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi -@@ -0,0 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+&csi1 { -+ port { -+ endpoint { -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -565,6 +565,32 @@ - status = "disabled"; - }; - -+ csi0: csi@7e800000 { -+ compatible = "brcm,bcm2835-unicam"; -+ reg = <0x7e800000 0x800>, -+ <0x7e802000 0x4>; -+ interrupts = <2 6>; -+ clocks = <&clocks BCM2835_CLOCK_CAM0>; -+ clock-names = "lp"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #clock-cells = <1>; -+ status = "disabled"; -+ }; -+ -+ csi1: csi@7e801000 { -+ compatible = "brcm,bcm2835-unicam"; -+ reg = <0x7e801000 0x800>, -+ <0x7e802004 0x4>; -+ interrupts = <2 7>; -+ clocks = <&clocks BCM2835_CLOCK_CAM1>; -+ clock-names = "lp"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #clock-cells = <1>; -+ status = "disabled"; -+ }; -+ - i2c1: i2c@7e804000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e804000 0x1000>; ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi -@@ -0,0 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+&csi1 { -+ port { -+ endpoint { -+ data-lanes = <1 2>; -+ }; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0203-BCM270X_DT-Add-CSI-defines-for-all-the-downstream-Pi.patch b/target/linux/brcm2708/patches-4.19/950-0203-BCM270X_DT-Add-CSI-defines-for-all-the-downstream-Pi.patch deleted file mode 100644 index 585fdc61aa..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0203-BCM270X_DT-Add-CSI-defines-for-all-the-downstream-Pi.patch +++ /dev/null @@ -1,117 +0,0 @@ -From 831423a9f14d46f69c78136d37c2ab0cdaa5bdb1 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 15:00:45 +0000 -Subject: [PATCH 203/806] BCM270X_DT: Add CSI defines for all the downstream Pi - platforms - -Adds the CSI device includes for the bcm27xx platform DTS files - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi-cm.dts | 2 ++ - arch/arm/boot/dts/bcm2708-rpi.dtsi | 8 ++++++++ - arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 1 + - arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 1 + - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 1 + - arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 2 ++ - 9 files changed, 18 insertions(+) - ---- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2708.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; ---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -@@ -2,6 +2,7 @@ - - #include "bcm2708.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - model = "Raspberry Pi Model B+"; ---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts -@@ -2,6 +2,7 @@ - - #include "bcm2708.dtsi" - #include "bcm283x-rpi-smsc9512.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - model = "Raspberry Pi Model B"; ---- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts -@@ -1,6 +1,8 @@ - /dts-v1/; - - #include "bcm2708-rpi-cm.dtsi" -+#include "bcm283x-rpi-csi0-2lane.dtsi" -+#include "bcm283x-rpi-csi1-4lane.dtsi" - - / { - model = "Raspberry Pi Compute Module"; ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -161,3 +161,11 @@ sdhost_pins: &sdhost_gpio48 { - &vec { - status = "disabled"; - }; -+ -+&csi0 { -+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; -+}; -+ -+&csi1 { -+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; -+}; ---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -@@ -2,6 +2,7 @@ - - #include "bcm2709.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -@@ -2,6 +2,7 @@ - - #include "bcm2710.dtsi" - #include "bcm283x-rpi-lan7515.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -2,6 +2,7 @@ - - #include "bcm2710.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; ---- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -@@ -1,6 +1,8 @@ - /dts-v1/; - - #include "bcm2710.dtsi" -+#include "bcm283x-rpi-csi0-2lane.dtsi" -+#include "bcm283x-rpi-csi1-4lane.dtsi" - - / { - model = "Raspberry Pi Compute Module 3"; diff --git a/target/linux/brcm2708/patches-4.19/950-0203-dwc-otg-FIQ-Fix-bad-mode-in-data-abort-handler.patch b/target/linux/brcm2708/patches-4.19/950-0203-dwc-otg-FIQ-Fix-bad-mode-in-data-abort-handler.patch new file mode 100644 index 0000000000..51c7732beb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0203-dwc-otg-FIQ-Fix-bad-mode-in-data-abort-handler.patch @@ -0,0 +1,128 @@ +From f36b3119d83e03c9d0c684b8712b66a979c48124 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 16 Jul 2018 14:40:13 +0100 +Subject: [PATCH] dwc-otg: FIQ: Fix "bad mode in data abort handler" + +Create a semi-static mapping for the USB registers early in the boot +process, before additional kernel threads are started, so all threads +will have the mappings from the start. This avoids the need for +data aborts to lazily update them. + +See: https://github.com/raspberrypi/linux/issues/2450 + +Signed-off-by: Floris Bos +--- + arch/arm/mach-bcm/board_bcm2835.c | 69 +++++++++++++++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_driver.c | 2 +- + 2 files changed, 70 insertions(+), 1 deletion(-) + +--- a/arch/arm/mach-bcm/board_bcm2835.c ++++ b/arch/arm/mach-bcm/board_bcm2835.c +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include + + #include +@@ -22,6 +23,9 @@ + + #include "platsmp.h" + ++#define BCM2835_USB_VIRT_BASE 0xf0980000 ++#define BCM2835_USB_VIRT_MPHI 0xf0006000 ++ + static void __init bcm2835_init(void) + { + struct device_node *np = of_find_node_by_path("/system"); +@@ -34,6 +38,70 @@ static void __init bcm2835_init(void) + system_serial_low = val64; + } + ++/* ++ * We need to map registers that are going to be accessed by the FIQ ++ * very early, before any kernel threads are spawned. Because if done ++ * later, the mapping tables are not updated instantly but lazily upon ++ * first access through a data abort handler. While that is fine ++ * when executing regular kernel code, if the first access in a specific ++ * thread happens while running FIQ code this will result in a panic. ++ * ++ * For more background see the following old mailing list thread: ++ * https://www.spinics.net/lists/arm-kernel/msg325250.html ++ */ ++static int __init bcm2835_map_usb(unsigned long node, const char *uname, ++ int depth, void *data) ++{ ++ struct map_desc map[2]; ++ const __be32 *reg; ++ int len; ++ unsigned long p2b_offset = *((unsigned long *) data); ++ ++ if (!of_flat_dt_is_compatible(node, "brcm,bcm2708-usb")) ++ return 0; ++ reg = of_get_flat_dt_prop(node, "reg", &len); ++ if (!reg || len != (sizeof(unsigned long) * 4)) ++ return 0; ++ ++ /* Use information about the physical addresses of the ++ * registers from the device tree, but use legacy ++ * iotable_init() static mapping function to map them, ++ * as ioremap() is not functional at this stage in boot. ++ */ ++ map[0].virtual = (unsigned long) BCM2835_USB_VIRT_BASE; ++ map[0].pfn = __phys_to_pfn(be32_to_cpu(reg[0]) - p2b_offset); ++ map[0].length = be32_to_cpu(reg[1]); ++ map[0].type = MT_DEVICE; ++ map[1].virtual = (unsigned long) BCM2835_USB_VIRT_MPHI; ++ map[1].pfn = __phys_to_pfn(be32_to_cpu(reg[2]) - p2b_offset); ++ map[1].length = be32_to_cpu(reg[3]); ++ map[1].type = MT_DEVICE; ++ iotable_init(map, 2); ++ ++ return 1; ++} ++ ++static void __init bcm2835_map_io(void) ++{ ++ const __be32 *ranges; ++ int soc, len; ++ unsigned long p2b_offset; ++ ++ debug_ll_io_init(); ++ ++ /* Find out how to map bus to physical address first from soc/ranges */ ++ soc = of_get_flat_dt_subnode_by_name(of_get_flat_dt_root(), "soc"); ++ if (soc < 0) ++ return; ++ ranges = of_get_flat_dt_prop(soc, "ranges", &len); ++ if (!ranges || len < (sizeof(unsigned long) * 3)) ++ return; ++ p2b_offset = be32_to_cpu(ranges[0]) - be32_to_cpu(ranges[1]); ++ ++ /* Now search for bcm2708-usb node in device tree */ ++ of_scan_flat_dt(bcm2835_map_usb, &p2b_offset); ++} ++ + static const char * const bcm2835_compat[] = { + #ifdef CONFIG_ARCH_MULTI_V6 + "brcm,bcm2835", +@@ -46,6 +114,7 @@ static const char * const bcm2835_compat + }; + + DT_MACHINE_START(BCM2835, "BCM2835") ++ .map_io = bcm2835_map_io, + .init_machine = bcm2835_init, + .dt_compat = bcm2835_compat, + .smp = smp_ops(bcm2836_smp_ops), +--- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c +@@ -837,7 +837,7 @@ static int dwc_otg_driver_probe( + retval = -ENOMEM; + goto fail; + } +- dev_dbg(&_dev->dev, "base=0x%08x\n", ++ dev_info(&_dev->dev, "base=0x%08x\n", + (unsigned)dwc_otg_device->os_dep.base); + #endif + diff --git a/target/linux/brcm2708/patches-4.19/950-0204-arm-dt-Add-DT-overlays-for-ADV7282M-OV5647-and-TC358.patch b/target/linux/brcm2708/patches-4.19/950-0204-arm-dt-Add-DT-overlays-for-ADV7282M-OV5647-and-TC358.patch deleted file mode 100644 index a39a7cee08..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0204-arm-dt-Add-DT-overlays-for-ADV7282M-OV5647-and-TC358.patch +++ /dev/null @@ -1,481 +0,0 @@ -From c3ea5332de058ee7b9139133f2f8103b6dff2478 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 15:01:59 +0000 -Subject: [PATCH 204/806] arm: dt: Add DT overlays for ADV7282M, OV5647, and - TC358743 - -DT overlays to setup the above devices via i2c_arm and csi1. -(This currently does not use the i2c-mux-pinctrl driver to -dynamically switch the pinctrl) - -tc358743 is tc358743 running at a default link frequency -of 972Mbit/s. This allows up to 1080P50 UYVY on 2 lanes. -There is a parameter to allow changing the link frequency, -but the only values supported by the driver are 297000000 -for 594Mbit/s, and 486000000 for 972Mbit/s. -There is also a parameter to enable 4 lane mode (only -relevant to Compute Module (1 or 3) csi1). - -tc358743-audio overlay enables I2S audio from the TC358743 -to the Pi (SD to GPIO20, SCK to GPIO18, WFS to GPIO19). - -ADV7282M is the Analog Devices analogue video to CSI bridge -chip. - -OV5647 is the Pi V1.3 camera module. Currently the driver only -supports VGA 8bit Bayer and very few controls. - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/overlays/Makefile | 4 + - arch/arm/boot/dts/overlays/README | 51 ++++++++ - .../boot/dts/overlays/adv7282m-overlay.dts | 76 ++++++++++++ - arch/arm/boot/dts/overlays/ov5647-overlay.dts | 87 ++++++++++++++ - .../dts/overlays/tc358743-audio-overlay.dts | 52 ++++++++ - .../boot/dts/overlays/tc358743-overlay.dts | 112 ++++++++++++++++++ - 6 files changed, 382 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/adv7282m-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ov5647-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/tc358743-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -6,6 +6,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - ads1015.dtbo \ - ads1115.dtbo \ - ads7846.dtbo \ -+ adv7282m.dtbo \ - akkordion-iqdacplus.dtbo \ - allo-boss-dac-pcm512x-audio.dtbo \ - allo-digione.dtbo \ -@@ -81,6 +82,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - mmc.dtbo \ - mpu6050.dtbo \ - mz61581.dtbo \ -+ ov5647.dtbo \ - papirus.dtbo \ - pi3-act-led.dtbo \ - pi3-disable-bt.dtbo \ -@@ -132,6 +134,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - spi2-3cs.dtbo \ - superaudioboard.dtbo \ - sx150x.dtbo \ -+ tc358743.dtbo \ -+ tc358743-audio.dtbo \ - tinylcd35.dtbo \ - uart0.dtbo \ - uart1.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -267,6 +267,15 @@ Params: cs SPI bus - www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt - - -+Name: adv7282m -+Info: Analog Devices ADV7282M analogue video to CSI2 bridge. -+ Uses Unicam1, which is the standard camera connector on most Pi -+ variants. -+Load: dtoverlay=adv7282m,= -+Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ -+ - Name: akkordion-iqdacplus - Info: Configures the Digital Dreamtime Akkordion Music Player (based on the - OEM IQAudIO DAC+ or DAC Zero module). -@@ -1284,6 +1293,23 @@ Params: speed Display - xohms Touchpanel sensitivity (X-plate resistance) - - -+Name: ov5647 -+Info: Omnivision OV5647 camera module. -+ Uses Unicam 1, which is the standard camera connector on most Pi -+ variants. -+Load: dtoverlay=ov5647,= -+Params: cam0-pwdn GPIO used to control the sensor powerdown line. -+ -+ cam0-led GPIO used to control the sensor led -+ Both these fields should be automatically filled -+ in by the firmware to reflect the default GPIO -+ configuration of the particular Pi variant in -+ use. -+ -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ -+ - Name: papirus - Info: PaPiRus ePaper Screen by Pi Supply (both HAT and pHAT) - Load: dtoverlay=papirus,= -@@ -1893,6 +1919,31 @@ Params: sx150-- Enables - connected. - - -+Name: tc358743 -+Info: Toshiba TC358743 HDMI to CSI-2 bridge chip. -+ Uses Unicam 1, which is the standard camera connector on most Pi -+ variants. -+Load: dtoverlay=tc358743,= -+Params: 4lane Use 4 lanes (only applicable to Compute Modules -+ CAM1 connector). -+ -+ link-frequency Set the link frequency. Only values of 297000000 -+ (574Mbit/s) and 486000000 (972Mbit/s - default) -+ are supported by the driver. -+ -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ -+ -+Name: tc358743-audio -+Info: Used in combination with the tc358743-fast overlay to route the audio -+ from the TC358743 over I2S to the Pi. -+ Wiring is LRCK/WFS to GPIO 19, BCK/SCK to GPIO 18, and DATA/SD to GPIO -+ 20. -+Load: dtoverlay=tc358743-audio,= -+Params: card-name Override the default, "tc358743", card name. -+ -+ - Name: tinylcd35 - Info: 3.5" Color TFT Display by www.tinylcd.com - Options: Touch, RTC, keypad ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -@@ -0,0 +1,76 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for Analog Devices ADV7282-M video to CSI2 bridge on VC I2C bus -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ adv7282: adv7282@21 { -+ compatible = "adi,adv7282-m"; -+ reg = <0x21>; -+ status = "okay"; -+ clock-frequency = <24000000>; -+ port { -+ adv7282_0: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ data-lanes = <1>; -+ link-frequencies = -+ /bits/ 64 <297000000>; -+ -+ mclk-frequency = <12000000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ fragment@1 { -+ target = <&csi1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ csi1_ep: endpoint { -+ remote-endpoint = <&adv7282_0>; -+ }; -+ }; -+ }; -+ }; -+ fragment@2 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ }; -+ fragment@3 { -+ target = <&i2c0_pins>; -+ __overlay__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ fragment@4 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_pins_28_29 = <0>,"+2-3"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts -@@ -0,0 +1,87 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for OV5647 camera module on VC I2C bus -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ov5647: ov5647@36 { -+ compatible = "ov5647"; -+ reg = <0x36>; -+ status = "okay"; -+ -+ pwdn-gpios = <&gpio 41 1>, <&gpio 32 1>; -+ clocks = <&ov5647_clk>; -+ -+ ov5647_clk: camera-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <25000000>; -+ }; -+ -+ port { -+ ov5647_0: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ clock-noncontinuous; -+ link-frequencies = -+ /bits/ 64 <297000000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&csi1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ csi1_ep: endpoint { -+ remote-endpoint = <&ov5647_0>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@3 { -+ target = <&i2c0_pins>; -+ __overlay__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ fragment@4 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_pins_28_29 = <0>,"+4-5"; -+ cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; -+ cam0-led = <&ov5647>,"pwdn-gpios:16"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts -@@ -0,0 +1,52 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions to add I2S audio from the Toshiba TC358743 HDMI to CSI2 bridge. -+// Requires tc358743 overlay to have been loaded to actually function. -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ tc358743_codec: tc358743-codec { -+ #sound-dai-cells = <0>; -+ compatible = "linux,spdif-dir"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ sound_overlay: __overlay__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "tc358743"; -+ simple-audio-card,bitclock-master = <&dailink0_slave>; -+ simple-audio-card,frame-master = <&dailink0_slave>; -+ status = "okay"; -+ -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ dai-tdm-slot-num = <2>; -+ dai-tdm-slot-width = <32>; -+ }; -+ dailink0_slave: simple-audio-card,codec { -+ sound-dai = <&tc358743_codec>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ card-name = <&sound_overlay>,"simple-audio-card,name"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts -@@ -0,0 +1,112 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for Toshiba TC358743 HDMI to CSI2 bridge on VC I2C bus -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ tc358743@0f { -+ compatible = "toshiba,tc358743"; -+ reg = <0x0f>; -+ status = "okay"; -+ -+ clocks = <&tc358743_clk>; -+ clock-names = "refclk"; -+ -+ tc358743_clk: bridge-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <27000000>; -+ }; -+ -+ port { -+ tc358743: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ clock-noncontinuous; -+ link-frequencies = -+ /bits/ 64 <486000000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&csi1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ csi1_ep: endpoint { -+ remote-endpoint = <&tc358743>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ tc358743@0f { -+ port { -+ endpoint { -+ data-lanes = <1 2>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c_vc>; -+ __dormant__ { -+ tc358743@0f { -+ port { -+ endpoint { -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@5 { -+ target = <&i2c0_pins>; -+ __overlay__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ fragment@6 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_pins_28_29 = <0>,"+4-5"; -+ 4lane = <0>, "-2+3"; -+ link-frequency = <&tc358743>,"link-frequencies#0"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0204-lirc-rpi-Remove-in-favour-of-gpio-ir.patch b/target/linux/brcm2708/patches-4.19/950-0204-lirc-rpi-Remove-in-favour-of-gpio-ir.patch new file mode 100644 index 0000000000..0c6e627993 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0204-lirc-rpi-Remove-in-favour-of-gpio-ir.patch @@ -0,0 +1,81 @@ +From 28b591dadb504861cdc535d5705aa4c8c3d3420f Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Fri, 30 Nov 2018 18:55:23 +0000 +Subject: [PATCH] lirc-rpi: Remove in favour of gpio-ir + +--- + arch/arm/boot/dts/overlays/Makefile | 1 - + .../boot/dts/overlays/lirc-rpi-overlay.dts | 57 ------------------- + 2 files changed, 58 deletions(-) + delete mode 100644 arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -68,7 +68,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + jedec-spi-nor.dtbo \ + justboom-dac.dtbo \ + justboom-digi.dtbo \ +- lirc-rpi.dtbo \ + ltc294x.dtbo \ + mbed-dac.dtbo \ + mcp23017.dtbo \ +--- a/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts ++++ /dev/null +@@ -1,57 +0,0 @@ +-// Definitions for lirc-rpi module +-/dts-v1/; +-/plugin/; +- +-/ { +- compatible = "brcm,bcm2708"; +- +- fragment@0 { +- target-path = "/"; +- __overlay__ { +- lirc_rpi: lirc_rpi { +- compatible = "rpi,lirc-rpi"; +- pinctrl-names = "default"; +- pinctrl-0 = <&lirc_pins>; +- status = "okay"; +- +- // Override autodetection of IR receiver circuit +- // (0 = active high, 1 = active low, -1 = no override ) +- rpi,sense = <0xffffffff>; +- +- // Software carrier +- // (0 = off, 1 = on) +- rpi,softcarrier = <1>; +- +- // Invert output +- // (0 = off, 1 = on) +- rpi,invert = <0>; +- +- // Enable debugging messages +- // (0 = off, 1 = on) +- rpi,debug = <0>; +- }; +- }; +- }; +- +- fragment@1 { +- target = <&gpio>; +- __overlay__ { +- lirc_pins: lirc_pins { +- brcm,pins = <17 18>; +- brcm,function = <1 0>; // out in +- brcm,pull = <0 1>; // off down +- }; +- }; +- }; +- +- __overrides__ { +- gpio_out_pin = <&lirc_pins>,"brcm,pins:0"; +- gpio_in_pin = <&lirc_pins>,"brcm,pins:4"; +- gpio_in_pull = <&lirc_pins>,"brcm,pull:4"; +- +- sense = <&lirc_rpi>,"rpi,sense:0"; +- softcarrier = <&lirc_rpi>,"rpi,softcarrier:0"; +- invert = <&lirc_rpi>,"rpi,invert:0"; +- debug = <&lirc_rpi>,"rpi,debug:0"; +- }; +-}; diff --git a/target/linux/brcm2708/patches-4.19/950-0205-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch b/target/linux/brcm2708/patches-4.19/950-0205-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch deleted file mode 100644 index c52a54758c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0205-dtoverlays-Add-support-for-ADV7280-M-ADV7281-M-and-A.patch +++ /dev/null @@ -1,135 +0,0 @@ -From 8ea13a43a77dfb45c836de2d6c747f630dd75275 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 31 Oct 2018 15:02:18 +0000 -Subject: [PATCH 205/806] dtoverlays: Add support for ADV7280-M, ADV7281-M and - ADV7281-MA chips. - -The driver that supports the ADV7282-M also supports the ADV7280-M, -ADV7281-M, and ADV7281-MA. -The 7280-M exposes 8 analogue inputs. The 7281-M doesn't have the -I2P deinterlacing block. The 7281-MA has 8 inputs but no I2P. -Otherwise they are the same as ADV7282-M. - -Adds a new overlay "adv728x" that includes the existing adv7282 -overlay but adds several parameters to modify the behaviour. - -Adds a new addr parameter to allow the I2C address to be changed. -(the chip has an address select pin to change between 0x20 and 0x21). - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 13 +++++++ - .../boot/dts/overlays/adv7282m-overlay.dts | 9 +++-- - .../boot/dts/overlays/adv728x-m-overlay.dts | 37 +++++++++++++++++++ - 4 files changed, 56 insertions(+), 4 deletions(-) - create mode 100644 arch/arm/boot/dts/overlays/adv728x-m-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -7,6 +7,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - ads1115.dtbo \ - ads7846.dtbo \ - adv7282m.dtbo \ -+ adv728x-m.dtbo \ - akkordion-iqdacplus.dtbo \ - allo-boss-dac-pcm512x-audio.dtbo \ - allo-digione.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -274,6 +274,19 @@ Info: Analog Devices ADV7282M analogue - Load: dtoverlay=adv7282m,= - Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. -+ addr Overrides the I2C address (default 0x21) -+ -+ -+Name: adv728x-m -+Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. -+ This is a wrapper for adv7282m, and defaults to ADV7282M. -+Load: dtoverlay=adv728x-m,= -+Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ addr Overrides the I2C address (default 0x21) -+ adv7280m Select ADV7280-M. -+ adv7281m Select ADV7281-M. -+ adv7281ma Select ADV7281-MA. - - - Name: akkordion-iqdacplus ---- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -+++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -@@ -13,13 +13,13 @@ - #size-cells = <0>; - status = "okay"; - -- adv7282: adv7282@21 { -+ adv728x: adv728x@21 { - compatible = "adi,adv7282-m"; - reg = <0x21>; - status = "okay"; - clock-frequency = <24000000>; - port { -- adv7282_0: endpoint { -+ adv728x_0: endpoint { - remote-endpoint = <&csi1_ep>; - clock-lanes = <0>; - data-lanes = <1>; -@@ -43,7 +43,7 @@ - #address-cells = <1>; - #size-cells = <0>; - csi1_ep: endpoint { -- remote-endpoint = <&adv7282_0>; -+ remote-endpoint = <&adv728x_0>; - }; - }; - }; -@@ -71,6 +71,7 @@ - }; - - __overrides__ { -- i2c_pins_28_29 = <0>,"+2-3"; -+ i2c_pins_28_29 = <0>,"+2-3"; -+ addr = <&adv728x>,"reg:0"; - }; - }; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts -@@ -0,0 +1,37 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for Analog Devices ADV728[0|1|2]-M video to CSI2 bridges on VC -+// I2C bus -+ -+#include "adv7282m-overlay.dts" -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ // Fragment numbers deliberately high to avoid conflicts with the -+ // included adv7282m overlay file. -+ -+ fragment@101 { -+ target = <&adv728x>; -+ __dormant__ { -+ compatible = "adi,adv7280-m"; -+ }; -+ }; -+ fragment@102 { -+ target = <&adv728x>; -+ __dormant__ { -+ compatible = "adi,adv7281-m"; -+ }; -+ }; -+ fragment@103 { -+ target = <&adv728x>; -+ __dormant__ { -+ compatible = "adi,adv7281-ma"; -+ }; -+ }; -+ -+ __overrides__ { -+ adv7280m = <0>, "+101"; -+ adv7281m = <0>, "+102"; -+ adv7281ma = <0>, "+103"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0205-media-bcm2835-unicam-Pass-through-the-colorspace-on-.patch b/target/linux/brcm2708/patches-4.19/950-0205-media-bcm2835-unicam-Pass-through-the-colorspace-on-.patch new file mode 100644 index 0000000000..8d9848a7e6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0205-media-bcm2835-unicam-Pass-through-the-colorspace-on-.patch @@ -0,0 +1,30 @@ +From f1ab5c7dc1328f0baad2a437a80c792f725c455f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 22 Nov 2018 17:28:02 +0000 +Subject: [PATCH] media: bcm2835-unicam: Pass through the colorspace on + try_fmt + +The current colorspace was always returned from try_fmt for no +good reason. +Return what the source subdevice returns instead. + +Signed-off-by: Dave Stevenson +--- + drivers/media/platform/bcm2835/bcm2835-unicam.c | 6 +----- + 1 file changed, 1 insertion(+), 5 deletions(-) + +--- a/drivers/media/platform/bcm2835/bcm2835-unicam.c ++++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c +@@ -761,11 +761,7 @@ static int unicam_try_fmt_vid_cap(struct + unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n"); + + v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format); +- /* +- * Use current colorspace for now, it will get +- * updated properly during s_fmt +- */ +- f->fmt.pix.colorspace = dev->v_fmt.fmt.pix.colorspace; ++ + return unicam_calc_format_size_bpl(dev, fmt, f); + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0206-media-tc358743-Return-an-appropriate-colorspace-from.patch b/target/linux/brcm2708/patches-4.19/950-0206-media-tc358743-Return-an-appropriate-colorspace-from.patch new file mode 100644 index 0000000000..28ee4e7f44 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0206-media-tc358743-Return-an-appropriate-colorspace-from.patch @@ -0,0 +1,98 @@ +From c7a3697a4d4c2199f05ab3cd321138d464ca62db Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 22 Nov 2018 17:31:06 +0000 +Subject: [PATCH] media: tc358743: Return an appropriate colorspace + from tc358743_set_fmt + +When calling tc358743_set_fmt, the code was calling tc358743_get_fmt +to choose a valid format. However that sets the colorspace +based on what was read back from the chip. When you set the format, +then the driver would choose and program the colorspace based +on the format code. + +The result was that if you called try or set format for UYVY +when the current format was RGB3 then you would get told sRGB, +and try RGB3 when current was UYVY and you would get told +SMPTE170M. + +The value programmed into the chip is determined by this driver, +therefore there is no need to read back the value. Return the +colorspace based on the format set/tried instead. + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/tc358743.c | 40 +++++++++++++----------------------- + 1 file changed, 14 insertions(+), 26 deletions(-) + +--- a/drivers/media/i2c/tc358743.c ++++ b/drivers/media/i2c/tc358743.c +@@ -1680,12 +1680,23 @@ static int tc358743_enum_mbus_code(struc + return 0; + } + ++static u32 tc358743_g_colorspace(u32 code) ++{ ++ switch (code) { ++ case MEDIA_BUS_FMT_RGB888_1X24: ++ return V4L2_COLORSPACE_SRGB; ++ case MEDIA_BUS_FMT_UYVY8_1X16: ++ return V4L2_COLORSPACE_SMPTE170M; ++ default: ++ return 0; ++ } ++} ++ + static int tc358743_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) + { + struct tc358743_state *state = to_state(sd); +- u8 vi_rep = i2c_rd8(sd, VI_REP); + + if (format->pad != 0) + return -EINVAL; +@@ -1695,23 +1706,7 @@ static int tc358743_get_fmt(struct v4l2_ + format->format.height = state->timings.bt.height; + format->format.field = V4L2_FIELD_NONE; + +- switch (vi_rep & MASK_VOUT_COLOR_SEL) { +- case MASK_VOUT_COLOR_RGB_FULL: +- case MASK_VOUT_COLOR_RGB_LIMITED: +- format->format.colorspace = V4L2_COLORSPACE_SRGB; +- break; +- case MASK_VOUT_COLOR_601_YCBCR_LIMITED: +- case MASK_VOUT_COLOR_601_YCBCR_FULL: +- format->format.colorspace = V4L2_COLORSPACE_SMPTE170M; +- break; +- case MASK_VOUT_COLOR_709_YCBCR_FULL: +- case MASK_VOUT_COLOR_709_YCBCR_LIMITED: +- format->format.colorspace = V4L2_COLORSPACE_REC709; +- break; +- default: +- format->format.colorspace = 0; +- break; +- } ++ format->format.colorspace = tc358743_g_colorspace(format->format.code); + + return 0; + } +@@ -1726,18 +1721,11 @@ static int tc358743_set_fmt(struct v4l2_ + int ret = tc358743_get_fmt(sd, cfg, format); + + format->format.code = code; ++ format->format.colorspace = tc358743_g_colorspace(code); + + if (ret) + return ret; + +- switch (code) { +- case MEDIA_BUS_FMT_RGB888_1X24: +- case MEDIA_BUS_FMT_UYVY8_1X16: +- break; +- default: +- return -EINVAL; +- } +- + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + return 0; + diff --git a/target/linux/brcm2708/patches-4.19/950-0207-staging-bcm2835-camera-fix-module-autoloading.patch b/target/linux/brcm2708/patches-4.19/950-0207-staging-bcm2835-camera-fix-module-autoloading.patch new file mode 100644 index 0000000000..161949da18 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0207-staging-bcm2835-camera-fix-module-autoloading.patch @@ -0,0 +1,24 @@ +From 8b6e9f2a951b38becf5b8a1e99ba1993f7751aac Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 20 Oct 2018 19:26:18 +0200 +Subject: [PATCH] staging: bcm2835-camera: fix module autoloading + +In order to make the module bcm2835-camera load automatically, we need to +add a module alias. + +Fixes: 4bebb0312ea9 ("staging/bcm2835-camera: Set ourselves up as a platform driver.") +Signed-off-by: Stefan Wahren +--- + drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -47,6 +47,7 @@ MODULE_DESCRIPTION("Broadcom 2835 MMAL v + MODULE_AUTHOR("Vincent Sanders"); + MODULE_LICENSE("GPL"); + MODULE_VERSION(BM2835_MMAL_VERSION); ++MODULE_ALIAS("platform:bcm2835-camera"); + + int bcm2835_v4l2_debug; + module_param_named(debug, bcm2835_v4l2_debug, int, 0644); diff --git a/target/linux/brcm2708/patches-4.19/950-0207-vcsm-Fix-an-NULL-dereference-in-the-import_dmabuf-er.patch b/target/linux/brcm2708/patches-4.19/950-0207-vcsm-Fix-an-NULL-dereference-in-the-import_dmabuf-er.patch deleted file mode 100644 index 900b53ffca..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0207-vcsm-Fix-an-NULL-dereference-in-the-import_dmabuf-er.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 654ca15f2234ce3677ed7c9eef5de588285b529a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 14 Nov 2018 11:54:46 +0000 -Subject: [PATCH 207/806] vcsm: Fix an NULL dereference in the import_dmabuf - error path - -resource was dereferenced even though it was NULL. - -Signed-off-by: Dave Stevenson ---- - drivers/char/broadcom/vc_sm/vmcs_sm.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/char/broadcom/vc_sm/vmcs_sm.c -+++ b/drivers/char/broadcom/vc_sm/vmcs_sm.c -@@ -2315,8 +2315,8 @@ int vc_sm_ioctl_import_dmabuf(struct sm_ - return 0; - - error: -- resource->res_stats[IMPORT_FAIL]++; - if (resource) { -+ resource->res_stats[IMPORT_FAIL]++; - vc_sm_resource_deceased(resource, 1); - kfree(resource); - } diff --git a/target/linux/brcm2708/patches-4.19/950-0208-Update-README-2750.patch b/target/linux/brcm2708/patches-4.19/950-0208-Update-README-2750.patch deleted file mode 100644 index e9d7677401..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0208-Update-README-2750.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 5b4c913a00ac41766ba70104749aa1533a370996 Mon Sep 17 00:00:00 2001 -From: James Hughes -Date: Tue, 13 Nov 2018 16:51:21 +0000 -Subject: [PATCH 208/806] Update README (#2750) - -Small update to the DT blob docs to include the axiperf option. - -Signed-off-by: James Hughes ---- - arch/arm/boot/dts/overlays/README | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -89,6 +89,11 @@ Params: - audio Set to "on" to enable the onboard ALSA audio - interface (default "off") - -+ axiperf Set to "on" to enable the AXI bus performance -+ monitors. -+ See /sys/kernel/debug/raspberrypi_axi_monitor -+ for the results. -+ - eee Enable Energy Efficient Ethernet support for - compatible devices (default "on"). See also - "tx_lpi_timer". diff --git a/target/linux/brcm2708/patches-4.19/950-0208-staging-bcm2835-camera-Move-module-info-to-the-end.patch b/target/linux/brcm2708/patches-4.19/950-0208-staging-bcm2835-camera-Move-module-info-to-the-end.patch new file mode 100644 index 0000000000..19c59f6077 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0208-staging-bcm2835-camera-Move-module-info-to-the-end.patch @@ -0,0 +1,38 @@ +From 3e8dfb23cfab3003ff83f4d32568ae4e38536572 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 20 Oct 2018 19:31:00 +0200 +Subject: [PATCH] staging: bcm2835-camera: Move module info to the end + +In order to have this more consistent between the vc04 services move +the module information to the end of the file. + +Signed-off-by: Stefan Wahren +--- + .../vc04_services/bcm2835-camera/bcm2835-camera.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -43,12 +43,6 @@ + + #define MAX_BCM2835_CAMERAS 2 + +-MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture"); +-MODULE_AUTHOR("Vincent Sanders"); +-MODULE_LICENSE("GPL"); +-MODULE_VERSION(BM2835_MMAL_VERSION); +-MODULE_ALIAS("platform:bcm2835-camera"); +- + int bcm2835_v4l2_debug; + module_param_named(debug, bcm2835_v4l2_debug, int, 0644); + MODULE_PARM_DESC(bcm2835_v4l2_debug, "Debug level 0-2"); +@@ -1980,3 +1974,9 @@ static struct platform_driver bcm2835_ca + }; + + module_platform_driver(bcm2835_camera_driver) ++ ++MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture"); ++MODULE_AUTHOR("Vincent Sanders"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(BM2835_MMAL_VERSION); ++MODULE_ALIAS("platform:bcm2835-camera"); diff --git a/target/linux/brcm2708/patches-4.19/950-0209-overlays-Remove-superfluous-address-size-cells.patch b/target/linux/brcm2708/patches-4.19/950-0209-overlays-Remove-superfluous-address-size-cells.patch deleted file mode 100644 index 594cef583a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0209-overlays-Remove-superfluous-address-size-cells.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 1648c72369a617b27193534f28fd86a1bdabd7b3 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 14 Nov 2018 09:53:25 +0000 -Subject: [PATCH 209/806] overlays: Remove superfluous #address/size-cells - -Newer versions of dtc warn about unnecessary usage of #address-cells -and #size-cells, so remove them. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/adv7282m-overlay.dts | 4 ---- - arch/arm/boot/dts/overlays/ov5647-overlay.dts | 4 ---- - arch/arm/boot/dts/overlays/tc358743-overlay.dts | 4 ---- - 3 files changed, 12 deletions(-) - ---- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -+++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -@@ -35,13 +35,9 @@ - fragment@1 { - target = <&csi1>; - __overlay__ { -- #address-cells = <1>; -- #size-cells = <0>; - status = "okay"; - - port { -- #address-cells = <1>; -- #size-cells = <0>; - csi1_ep: endpoint { - remote-endpoint = <&adv728x_0>; - }; ---- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts -@@ -44,13 +44,9 @@ - fragment@1 { - target = <&csi1>; - __overlay__ { -- #address-cells = <1>; -- #size-cells = <0>; - status = "okay"; - - port { -- #address-cells = <1>; -- #size-cells = <0>; - csi1_ep: endpoint { - remote-endpoint = <&ov5647_0>; - }; ---- a/arch/arm/boot/dts/overlays/tc358743-overlay.dts -+++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts -@@ -43,13 +43,9 @@ - fragment@1 { - target = <&csi1>; - __overlay__ { -- #address-cells = <1>; -- #size-cells = <0>; - status = "okay"; - - port { -- #address-cells = <1>; -- #size-cells = <0>; - csi1_ep: endpoint { - remote-endpoint = <&tc358743>; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0209-staging-vchiq_arm-Fix-platform-device-unregistration.patch b/target/linux/brcm2708/patches-4.19/950-0209-staging-vchiq_arm-Fix-platform-device-unregistration.patch new file mode 100644 index 0000000000..b32699d09f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0209-staging-vchiq_arm-Fix-platform-device-unregistration.patch @@ -0,0 +1,27 @@ +From 1ada615db1b97faec9c4625ccfd2cc35d54d850a Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 13 Oct 2018 20:51:23 +0200 +Subject: [PATCH] staging: vchiq_arm: Fix platform device + unregistration + +In error case platform_device_register_data would return an ERR_PTR +instead of NULL. So we better check this before unregistration. + +Fixes: 37b7b3087a2f ("staging/vc04_services: Register a platform device for the camera driver.") +Signed-off-by: Stefan Wahren +--- + drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -3656,7 +3656,8 @@ failed_platform_init: + + static int vchiq_remove(struct platform_device *pdev) + { +- platform_device_unregister(bcm2835_camera); ++ if (!IS_ERR(bcm2835_camera)) ++ platform_device_unregister(bcm2835_camera); + vchiq_debugfs_deinit(); + device_destroy(vchiq_class, vchiq_devid); + class_destroy(vchiq_class); diff --git a/target/linux/brcm2708/patches-4.19/950-0210-Revert-ASoC-wm8804-MCLK-configuration-options-32-bit.patch b/target/linux/brcm2708/patches-4.19/950-0210-Revert-ASoC-wm8804-MCLK-configuration-options-32-bit.patch deleted file mode 100644 index 545d4d1c14..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0210-Revert-ASoC-wm8804-MCLK-configuration-options-32-bit.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 7c62d38653565e900504f821586e1b1d47f25594 Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Sun, 18 Nov 2018 13:21:26 +0100 -Subject: [PATCH 210/806] Revert "ASoC: wm8804: MCLK configuration options, - 32-bit" - -This reverts commit 3b12dcf797f5a4635aecd7f5c090dc507b124ffd. - -Despite the commit message being wrong idle_bias changes -were already reverted in the 4.14 tree. - -So drop the commit to bring the wm8804 driver back in line with -the rpi-4.14.y and upstream linux trees. - -Signed-off-by: Matthias Reichl ---- - sound/soc/codecs/wm8804.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/sound/soc/codecs/wm8804.c -+++ b/sound/soc/codecs/wm8804.c -@@ -550,7 +550,6 @@ static const struct snd_soc_component_dr - .use_pmdown_time = 1, - .endianness = 1, - .non_legacy_dai_naming = 1, -- .idle_bias_on = true, - }; - - const struct regmap_config wm8804_regmap_config = { diff --git a/target/linux/brcm2708/patches-4.19/950-0210-staging-vchiq_arm-Fix-camera-device-registration.patch b/target/linux/brcm2708/patches-4.19/950-0210-staging-vchiq_arm-Fix-camera-device-registration.patch new file mode 100644 index 0000000000..9cf02e9ab9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0210-staging-vchiq_arm-Fix-camera-device-registration.patch @@ -0,0 +1,56 @@ +From 58ed78a70c3c3ef1ae99aefdd2c28ac81f66df85 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Mon, 22 Oct 2018 15:16:51 +0200 +Subject: [PATCH] staging: vchiq_arm: Fix camera device registration + +Since the camera driver isn't probed via DT, we need to properly setup DMA. + +Fixes: 37b7b3087a2f ("staging/vc04_services: Register a platform device for the camera driver.") +Signed-off-by: Stefan Wahren +--- + .../interface/vchiq_arm/vchiq_arm.c | 20 ++++++++++++++++--- + 1 file changed, 17 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -49,6 +49,7 @@ + #include + #include + #include ++#include + #include + + #include "vchiq_core.h" +@@ -3578,6 +3579,21 @@ void vchiq_platform_conn_state_changed(V + } + } + ++static struct platform_device * ++vchiq_register_child(struct platform_device *pdev, const char *name) ++{ ++ struct platform_device_info pdevinfo; ++ ++ memset(&pdevinfo, 0, sizeof(pdevinfo)); ++ ++ pdevinfo.parent = &pdev->dev; ++ pdevinfo.name = name; ++ pdevinfo.id = PLATFORM_DEVID_NONE; ++ pdevinfo.dma_mask = DMA_BIT_MASK(32); ++ ++ return platform_device_register_full(&pdevinfo); ++} ++ + static int vchiq_probe(struct platform_device *pdev) + { + struct device_node *fw_node; +@@ -3637,9 +3653,7 @@ static int vchiq_probe(struct platform_d + VCHIQ_VERSION, VCHIQ_VERSION_MIN, + MAJOR(vchiq_devid), MINOR(vchiq_devid)); + +- bcm2835_camera = platform_device_register_data(&pdev->dev, +- "bcm2835-camera", -1, +- NULL, 0); ++ bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); + + return 0; + diff --git a/target/linux/brcm2708/patches-4.19/950-0211-rpi-wm8804-soundcard-drop-PWRDN-register-writes.patch b/target/linux/brcm2708/patches-4.19/950-0211-rpi-wm8804-soundcard-drop-PWRDN-register-writes.patch deleted file mode 100644 index c662d3fbdd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0211-rpi-wm8804-soundcard-drop-PWRDN-register-writes.patch +++ /dev/null @@ -1,128 +0,0 @@ -From 31b533207610f0f703cfdcba3baf404d000f1363 Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Sun, 18 Nov 2018 15:24:16 +0100 -Subject: [PATCH 211/806] rpi-wm8804-soundcard: drop PWRDN register writes - -Since kernel 4.0 the PWRDN register bits are under DAPM -control from the wm8804 driver. - -Drop code that modifies that register to avoid interfering -with DAPM. - -Signed-off-by: Matthias Reichl ---- - sound/soc/bcm/rpi-wm8804-soundcard.c | 55 ---------------------------- - 1 file changed, 55 deletions(-) - ---- a/sound/soc/bcm/rpi-wm8804-soundcard.c -+++ b/sound/soc/bcm/rpi-wm8804-soundcard.c -@@ -54,8 +54,6 @@ struct snd_rpi_wm8804_drvdata { - struct snd_soc_dai_link *dai; - /* Required - snd_soc_card name */ - const char *card_name; -- /* Optional- Overrides the module paramter */ -- unsigned short auto_shutdown_output; - /* Optional DT node names if card info is defined in DT */ - const char *card_name_dt; - const char *dai_name_dt; -@@ -64,51 +62,12 @@ struct snd_rpi_wm8804_drvdata { - int (*probe)(struct platform_device *pdev); - }; - --static short int auto_shutdown_output; --module_param(auto_shutdown_output, short, 0660); --MODULE_PARM_DESC(auto_shutdown_output, "Shutdown SP/DIF output if playback is stopped"); -- - static struct gpio_desc *snd_clk44gpio; - static struct gpio_desc *snd_clk48gpio; - - #define CLK_44EN_RATE 22579200UL - #define CLK_48EN_RATE 24576000UL - --static int snd_rpi_wm8804_init(struct snd_soc_pcm_runtime *rtd) --{ -- struct snd_soc_component *component = rtd->codec_dai->component; -- int rc; -- -- pr_debug("%s\n", __func__); -- -- rc = snd_soc_component_update_bits(component, WM8804_PWRDN, 0x4, 0x0); -- return rc < 0 ? rc : 0; --} -- --static int snd_rpi_wm8804_digi_startup(struct snd_pcm_substream *substream) --{ -- struct snd_soc_pcm_runtime *rtd = substream->private_data; -- struct snd_soc_component *component = rtd->codec_dai->component; -- int rc; -- -- pr_debug("%s\n", __func__); -- -- rc = snd_soc_component_update_bits(component, WM8804_PWRDN, 0x3c, 0x00); -- return rc < 0 ? rc : 0; --} -- --static void snd_rpi_wm8804_digi_shutdown(struct snd_pcm_substream *substream) --{ -- struct snd_soc_pcm_runtime *rtd = substream->private_data; -- struct snd_soc_component *component = rtd->codec_dai->component; -- -- pr_debug("%s %d\n", __func__, auto_shutdown_output); -- -- if (auto_shutdown_output) -- snd_soc_component_update_bits(component, WM8804_PWRDN, -- 0x3c, 0x3c); --} -- - static unsigned int snd_rpi_wm8804_enable_clock(unsigned int samplerate) - { - switch (samplerate) { -@@ -204,12 +163,6 @@ static int snd_rpi_wm8804_hw_params(stru - return ret; - } - -- /* Enable TX output */ -- snd_soc_component_update_bits(component, WM8804_PWRDN, 0x4, 0x0); -- -- /* Power on */ -- snd_soc_component_update_bits(component, WM8804_PWRDN, 0x9, 0); -- - /* set sampling frequency status bits */ - snd_soc_component_update_bits(component, WM8804_SPDTX4, 0x0f, - sampling_freq); -@@ -219,8 +172,6 @@ static int snd_rpi_wm8804_hw_params(stru - - static struct snd_soc_ops snd_rpi_wm8804_ops = { - .hw_params = snd_rpi_wm8804_hw_params, -- .startup = snd_rpi_wm8804_digi_startup, -- .shutdown = snd_rpi_wm8804_digi_shutdown, - }; - - static struct snd_soc_dai_link snd_justboom_digi_dai[] = { -@@ -233,7 +184,6 @@ static struct snd_soc_dai_link snd_justb - static struct snd_rpi_wm8804_drvdata drvdata_justboom_digi = { - .card_name = "snd_rpi_justboom_digi", - .dai = snd_justboom_digi_dai, -- .auto_shutdown_output = 1, - }; - - static struct snd_soc_dai_link snd_iqaudio_digi_dai[] = { -@@ -335,8 +285,6 @@ static int snd_rpi_wm8804_probe(struct p - - snd_soc_card_set_drvdata(&snd_rpi_wm8804, drvdata); - -- if (!dai->init) -- dai->init = snd_rpi_wm8804_init; - if (!dai->ops) - dai->ops = &snd_rpi_wm8804_ops; - if (!dai->codec_dai_name) -@@ -348,9 +296,6 @@ static int snd_rpi_wm8804_probe(struct p - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM; - -- if (drvdata->auto_shutdown_output) -- auto_shutdown_output = 1; -- - snd_rpi_wm8804.dai_link = dai; - i2s_node = of_parse_phandle(pdev->dev.of_node, - "i2s-controller", 0); diff --git a/target/linux/brcm2708/patches-4.19/950-0211-staging-vchiq_arm-Register-a-platform-device-for-the.patch b/target/linux/brcm2708/patches-4.19/950-0211-staging-vchiq_arm-Register-a-platform-device-for-the.patch new file mode 100644 index 0000000000..793fc21396 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0211-staging-vchiq_arm-Register-a-platform-device-for-the.patch @@ -0,0 +1,38 @@ +From 0ca486925a32b7c95752ff250afdd59bcf6c8574 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 20 Oct 2018 20:25:41 +0200 +Subject: [PATCH] staging: vchiq_arm: Register a platform device for + the audio driver + +Signed-off-by: Stefan Wahren +--- + drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -170,6 +170,7 @@ static struct class *vchiq_class; + static struct device *vchiq_dev; + static DEFINE_SPINLOCK(msg_queue_spinlock); + static struct platform_device *bcm2835_camera; ++static struct platform_device *bcm2835_audio; + + static const char *const ioctl_names[] = { + "CONNECT", +@@ -3654,6 +3655,7 @@ static int vchiq_probe(struct platform_d + MAJOR(vchiq_devid), MINOR(vchiq_devid)); + + bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); ++ bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio"); + + return 0; + +@@ -3670,6 +3672,8 @@ failed_platform_init: + + static int vchiq_remove(struct platform_device *pdev) + { ++ if (!IS_ERR(bcm2835_audio)) ++ platform_device_unregister(bcm2835_audio); + if (!IS_ERR(bcm2835_camera)) + platform_device_unregister(bcm2835_camera); + vchiq_debugfs_deinit(); diff --git a/target/linux/brcm2708/patches-4.19/950-0212-rpi-wm8804-soundcard-configure-wm8804-clocks-only-on.patch b/target/linux/brcm2708/patches-4.19/950-0212-rpi-wm8804-soundcard-configure-wm8804-clocks-only-on.patch deleted file mode 100644 index 6f4d3a9195..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0212-rpi-wm8804-soundcard-configure-wm8804-clocks-only-on.patch +++ /dev/null @@ -1,46 +0,0 @@ -From f6b133a056e8fde7f4707e2874e204c7d5d671a2 Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Sun, 18 Nov 2018 15:32:28 +0100 -Subject: [PATCH 212/806] rpi-wm8804-soundcard: configure wm8804 clocks only on - rate change - -This should avoid clicks when stopping and immediately afterwards -starting a stream with the same samplerate as before. - -Signed-off-by: Matthias Reichl ---- - sound/soc/bcm/rpi-wm8804-soundcard.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/sound/soc/bcm/rpi-wm8804-soundcard.c -+++ b/sound/soc/bcm/rpi-wm8804-soundcard.c -@@ -64,6 +64,7 @@ struct snd_rpi_wm8804_drvdata { - - static struct gpio_desc *snd_clk44gpio; - static struct gpio_desc *snd_clk48gpio; -+static int wm8804_samplerate = 0; - - #define CLK_44EN_RATE 22579200UL - #define CLK_48EN_RATE 24576000UL -@@ -117,6 +118,12 @@ static int snd_rpi_wm8804_hw_params(stru - struct wm8804_clk_cfg clk_cfg; - int samplerate = params_rate(params); - -+ if (samplerate == wm8804_samplerate) -+ return 0; -+ -+ /* clear until all clocks are setup properly */ -+ wm8804_samplerate = 0; -+ - snd_rpi_wm8804_clk_cfg(samplerate, &clk_cfg); - - pr_debug("%s samplerate: %d mclk_freq: %u mclk_div: %u sysclk: %u\n", -@@ -163,6 +170,8 @@ static int snd_rpi_wm8804_hw_params(stru - return ret; - } - -+ wm8804_samplerate = samplerate; -+ - /* set sampling frequency status bits */ - snd_soc_component_update_bits(component, WM8804_SPDTX4, 0x0f, - sampling_freq); diff --git a/target/linux/brcm2708/patches-4.19/950-0212-staging-bcm2835-audio-Enable-compile-test.patch b/target/linux/brcm2708/patches-4.19/950-0212-staging-bcm2835-audio-Enable-compile-test.patch new file mode 100644 index 0000000000..3c6bfd4db2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0212-staging-bcm2835-audio-Enable-compile-test.patch @@ -0,0 +1,22 @@ +From d08cc93a489df7707afaaa693afd2e7a153c85a3 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 13 Oct 2018 20:19:13 +0200 +Subject: [PATCH] staging: bcm2835-audio: Enable compile test + +Enable the compilation test for bcm2835-audio. + +Signed-off-by: Stefan Wahren +--- + drivers/staging/vc04_services/bcm2835-audio/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/Kconfig ++++ b/drivers/staging/vc04_services/bcm2835-audio/Kconfig +@@ -1,6 +1,6 @@ + config SND_BCM2835 + tristate "BCM2835 Audio" +- depends on ARCH_BCM2835 && SND ++ depends on (ARCH_BCM2835 || COMPILE_TEST) && SND + select SND_PCM + select BCM2835_VCHIQ + help diff --git a/target/linux/brcm2708/patches-4.19/950-0213-dtoverlays-Add-i2c-on-0-1-option-to-TC358743-ADV7282.patch b/target/linux/brcm2708/patches-4.19/950-0213-dtoverlays-Add-i2c-on-0-1-option-to-TC358743-ADV7282.patch deleted file mode 100644 index c7c3dc1c30..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0213-dtoverlays-Add-i2c-on-0-1-option-to-TC358743-ADV7282.patch +++ /dev/null @@ -1,142 +0,0 @@ -From 83b839b8b3a599336c2d48ab22ed919a77666476 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 26 Nov 2018 17:02:15 +0000 -Subject: [PATCH 213/806] dtoverlays: Add i2c on 0&1 option to TC358743, - ADV7282 and OV5647 - -Adds the option of configuring i2c0 to be on GPIOs 0&1 as -this is of use on the Compute Module. - -Also fixes the ov5647 overlay where the override enabled the wrong -fragments. - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/overlays/README | 14 ++++++++++++-- - arch/arm/boot/dts/overlays/adv7282m-overlay.dts | 10 +++++++++- - arch/arm/boot/dts/overlays/ov5647-overlay.dts | 10 +++++++++- - arch/arm/boot/dts/overlays/tc358743-overlay.dts | 10 +++++++++- - 4 files changed, 39 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -277,7 +277,9 @@ Info: Analog Devices ADV7282M analogue - Uses Unicam1, which is the standard camera connector on most Pi - variants. - Load: dtoverlay=adv7282m,= --Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - addr Overrides the I2C address (default 0x21) - -@@ -286,7 +288,9 @@ Name: adv728x-m - Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. - This is a wrapper for adv7282m, and defaults to ADV7282M. - Load: dtoverlay=adv728x-m,= --Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - addr Overrides the I2C address (default 0x21) - adv7280m Select ADV7280-M. -@@ -1324,6 +1328,9 @@ Params: cam0-pwdn GPIO use - configuration of the particular Pi variant in - use. - -+ i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ - i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - -@@ -1949,6 +1956,9 @@ Params: 4lane Use 4 la - (574Mbit/s) and 486000000 (972Mbit/s - default) - are supported by the driver. - -+ i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ - i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - ---- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -+++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -@@ -60,6 +60,13 @@ - }; - }; - fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@5 { - target = <&i2c_vc>; - __overlay__ { - status = "okay"; -@@ -67,7 +74,8 @@ - }; - - __overrides__ { -- i2c_pins_28_29 = <0>,"+2-3"; -+ i2c_pins_0_1 = <0>,"-2-3+4"; -+ i2c_pins_28_29 = <0>,"+2-3-4"; - addr = <&adv728x>,"reg:0"; - }; - }; ---- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts -@@ -69,6 +69,13 @@ - }; - }; - fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@5 { - target = <&i2c_vc>; - __overlay__ { - status = "okay"; -@@ -76,7 +83,8 @@ - }; - - __overrides__ { -- i2c_pins_28_29 = <0>,"+4-5"; -+ i2c_pins_0_1 = <0>,"-2-3+4"; -+ i2c_pins_28_29 = <0>,"+2-3-4"; - cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; - cam0-led = <&ov5647>,"pwdn-gpios:16"; - }; ---- a/arch/arm/boot/dts/overlays/tc358743-overlay.dts -+++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts -@@ -94,6 +94,13 @@ - }; - }; - fragment@6 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@7 { - target = <&i2c_vc>; - __overlay__ { - status = "okay"; -@@ -101,7 +108,8 @@ - }; - - __overrides__ { -- i2c_pins_28_29 = <0>,"+4-5"; -+ i2c_pins_0_1 = <0>,"-4-5+6"; -+ i2c_pins_28_29 = <0>,"+4-5-6"; - 4lane = <0>, "-2+3"; - link-frequency = <&tc358743>,"link-frequencies#0"; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0213-staging-bcm2835-audio-use-module_platform_driver-mac.patch b/target/linux/brcm2708/patches-4.19/950-0213-staging-bcm2835-audio-use-module_platform_driver-mac.patch new file mode 100644 index 0000000000..a9f077675c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0213-staging-bcm2835-audio-use-module_platform_driver-mac.patch @@ -0,0 +1,43 @@ +From f1aada1b4c974fa756e299c15b62c76e478e652e Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Thu, 18 Oct 2018 19:47:29 +0200 +Subject: [PATCH] staging: bcm2835-audio: use module_platform_driver() + macro + +There is not much value behind this boilerplate, so use +module_platform_driver() instead. + +Signed-off-by: Stefan Wahren +--- + .../vc04_services/bcm2835-audio/bcm2835.c | 20 +------------------ + 1 file changed, 1 insertion(+), 19 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -470,25 +470,7 @@ static struct platform_driver bcm2835_al + .of_match_table = snd_bcm2835_of_match_table, + }, + }; +- +-static int bcm2835_alsa_device_init(void) +-{ +- int retval; +- +- retval = platform_driver_register(&bcm2835_alsa0_driver); +- if (retval) +- pr_err("Error registering bcm2835_audio driver %d .\n", retval); +- +- return retval; +-} +- +-static void bcm2835_alsa_device_exit(void) +-{ +- platform_driver_unregister(&bcm2835_alsa0_driver); +-} +- +-late_initcall(bcm2835_alsa_device_init); +-module_exit(bcm2835_alsa_device_exit); ++module_platform_driver(bcm2835_alsa0_driver); + + MODULE_AUTHOR("Dom Cobley"); + MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); diff --git a/target/linux/brcm2708/patches-4.19/950-0214-overlays-Update-upstream-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0214-overlays-Update-upstream-overlay.patch deleted file mode 100644 index 1b0a805dd5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0214-overlays-Update-upstream-overlay.patch +++ /dev/null @@ -1,53 +0,0 @@ -From e62fed2c6b825e4b9d688dab7b7603fc95bb49cb Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 26 Nov 2018 20:15:16 +0000 -Subject: [PATCH 214/806] overlays: Update upstream overlay - -The vc4-kms-v3d overlay gained an extra fragment enabling the txp node, -so rebuild the upstream overlay to match. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/upstream-overlay.dts | 12 +++++++++--- - 1 file changed, 9 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/overlays/upstream-overlay.dts -+++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts -@@ -116,6 +116,12 @@ - }; - }; - fragment@17 { -+ target = <&txp>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@18 { - target = <&usb>; - #address-cells = <1>; - #size-cells = <1>; -@@ -130,21 +136,21 @@ - status = "okay"; - }; - }; -- fragment@18 { -+ fragment@19 { - target = <&uart1>; - __overlay__ { - interrupt-parent = <&intc>; - interrupts = <0x1 0x1d>; - }; - }; -- fragment@19 { -+ fragment@20 { - target = <&spi1>; - __overlay__ { - interrupt-parent = <&intc>; - interrupts = <0x1 0x1d>; - }; - }; -- fragment@20 { -+ fragment@21 { - target = <&spi2>; - __overlay__ { - interrupt-parent = <&intc>; diff --git a/target/linux/brcm2708/patches-4.19/950-0214-staging-bcm2835-audio-Drop-DT-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0214-staging-bcm2835-audio-Drop-DT-dependency.patch new file mode 100644 index 0000000000..62b2c88875 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0214-staging-bcm2835-audio-Drop-DT-dependency.patch @@ -0,0 +1,116 @@ +From ba833c9b912d2ca6fe23d700c4bd6f61742d5e04 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Thu, 18 Oct 2018 19:54:01 +0200 +Subject: [PATCH] staging: bcm2835-audio: Drop DT dependency + +Just like the bcm2835-video make this a platform driver which is probed +by vchiq. In order to change the number of channels use a module +parameter instead, but use the maximum as default. + +Signed-off-by: Stefan Wahren +--- + .../vc04_services/bcm2835-audio/bcm2835.c | 41 +++++++++---------- + 1 file changed, 19 insertions(+), 22 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -4,15 +4,17 @@ + #include + + #include ++#include ++#include + #include + #include +-#include + + #include "bcm2835.h" + + static bool enable_hdmi; + static bool enable_headphones; + static bool enable_compat_alsa = true; ++static int num_channels = MAX_SUBSTREAMS; + + module_param(enable_hdmi, bool, 0444); + MODULE_PARM_DESC(enable_hdmi, "Enables HDMI virtual audio device"); +@@ -21,6 +23,8 @@ MODULE_PARM_DESC(enable_headphones, "Ena + module_param(enable_compat_alsa, bool, 0444); + MODULE_PARM_DESC(enable_compat_alsa, + "Enables ALSA compatibility virtual audio device"); ++module_param(num_channels, int, 0644); ++MODULE_PARM_DESC(num_channels, "Number of audio channels (default: 8)"); + + static void snd_devm_unregister_child(struct device *dev, void *res) + { +@@ -407,31 +411,30 @@ static int snd_add_child_devices(struct + return 0; + } + +-static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) ++static int snd_bcm2835_alsa_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; +- u32 numchans; + int err; + +- err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", +- &numchans); +- if (err) { +- dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); +- return err; ++ if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) { ++ num_channels = MAX_SUBSTREAMS; ++ dev_warn(dev, "Illegal num_channels value, will use %u\n", ++ num_channels); + } + +- if (numchans == 0 || numchans > MAX_SUBSTREAMS) { +- numchans = MAX_SUBSTREAMS; +- dev_warn(dev, +- "Illegal 'brcm,pwm-channels' value, will use %u\n", +- numchans); ++ dev->coherent_dma_mask = DMA_BIT_MASK(32); ++ dev->dma_mask = &dev->coherent_dma_mask; ++ err = of_dma_configure(dev, NULL, true); ++ if (err) { ++ dev_err(dev, "Unable to setup DMA: %d\n", err); ++ return err; + } + + err = bcm2835_devm_add_vchi_ctx(dev); + if (err) + return err; + +- err = snd_add_child_devices(dev, numchans); ++ err = snd_add_child_devices(dev, num_channels); + if (err) + return err; + +@@ -453,21 +456,14 @@ static int snd_bcm2835_alsa_resume(struc + + #endif + +-static const struct of_device_id snd_bcm2835_of_match_table[] = { +- { .compatible = "brcm,bcm2835-audio",}, +- {}, +-}; +-MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); +- + static struct platform_driver bcm2835_alsa0_driver = { +- .probe = snd_bcm2835_alsa_probe_dt, ++ .probe = snd_bcm2835_alsa_probe, + #ifdef CONFIG_PM + .suspend = snd_bcm2835_alsa_suspend, + .resume = snd_bcm2835_alsa_resume, + #endif + .driver = { + .name = "bcm2835_audio", +- .of_match_table = snd_bcm2835_of_match_table, + }, + }; + module_platform_driver(bcm2835_alsa0_driver); +@@ -475,3 +471,4 @@ module_platform_driver(bcm2835_alsa0_dri + MODULE_AUTHOR("Dom Cobley"); + MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); + MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:bcm2835_audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0215-BCM2708_DT-update-firmware-node-binding.patch b/target/linux/brcm2708/patches-4.19/950-0215-BCM2708_DT-update-firmware-node-binding.patch deleted file mode 100644 index 781032c48b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0215-BCM2708_DT-update-firmware-node-binding.patch +++ /dev/null @@ -1,27 +0,0 @@ -From e07c078b68e1776fa10818a1586c23a98a21ebdd Mon Sep 17 00:00:00 2001 -From: Nicolas Saenz Julienne -Date: Wed, 28 Nov 2018 10:36:01 +0100 -Subject: [PATCH 215/806] BCM2708_DT: update firmware node binding - -The upstreamed version of the firmware node has been updated to present -it as a "simple-bus". We need to get this in order to accomodate other -device bindings, namely RPi's firmware based gpio expander. - -Signed-off-by: Nicolas Saenz Julienne ---- - arch/arm/boot/dts/bcm2708-rpi.dtsi | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -50,7 +50,9 @@ - }; - - firmware: firmware { -- compatible = "raspberrypi,bcm2835-firmware"; -+ compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; -+ #address-cells = <0>; -+ #size-cells = <0>; - mboxes = <&mailbox>; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0215-staging-bcm2835-camera-Provide-more-specific-probe-e.patch b/target/linux/brcm2708/patches-4.19/950-0215-staging-bcm2835-camera-Provide-more-specific-probe-e.patch new file mode 100644 index 0000000000..a568366855 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0215-staging-bcm2835-camera-Provide-more-specific-probe-e.patch @@ -0,0 +1,166 @@ +From 94a174095f29c77574548eea17aacaed5c540757 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sun, 21 Oct 2018 18:40:07 +0200 +Subject: [PATCH] staging: bcm2835-camera: Provide more specific probe + error messages + +Currently there is only a catch-all info message which print the +relevant error code without any context. So add more specific error +messages in order to narrow down possible issues. + +Signed-off-by: Stefan Wahren +--- + .../bcm2835-camera/bcm2835-camera.c | 58 +++++++++++++------ + 1 file changed, 39 insertions(+), 19 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -1552,8 +1552,11 @@ static int mmal_init(struct bm2835_mmal_ + struct vchiq_mmal_component *camera; + + ret = vchiq_mmal_init(&dev->instance); +- if (ret < 0) ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, "%s: vchiq mmal init failed %d\n", ++ __func__, ret); + return ret; ++ } + + /* get the camera component ready */ + ret = vchiq_mmal_component_init(dev->instance, "ril.camera", +@@ -1562,7 +1565,9 @@ static int mmal_init(struct bm2835_mmal_ + goto unreg_mmal; + + camera = dev->component[MMAL_COMPONENT_CAMERA]; +- if (camera->outputs < MMAL_CAMERA_PORT_COUNT) { ++ if (camera->outputs < MMAL_CAMERA_PORT_COUNT) { ++ v4l2_err(&dev->v4l2_dev, "%s: too few camera outputs %d needed %d\n", ++ __func__, camera->outputs, MMAL_CAMERA_PORT_COUNT); + ret = -EINVAL; + goto unreg_camera; + } +@@ -1570,8 +1575,11 @@ static int mmal_init(struct bm2835_mmal_ + ret = set_camera_parameters(dev->instance, + camera, + dev); +- if (ret < 0) ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, "%s: unable to set camera parameters: %d\n", ++ __func__, ret); + goto unreg_camera; ++ } + + /* There was an error in the firmware that meant the camera component + * produced BGR instead of RGB. +@@ -1660,8 +1668,8 @@ static int mmal_init(struct bm2835_mmal_ + + if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) { + ret = -EINVAL; +- pr_debug("too few input ports %d needed %d\n", +- dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1); ++ v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", ++ __func__, dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1); + goto unreg_preview; + } + +@@ -1674,8 +1682,8 @@ static int mmal_init(struct bm2835_mmal_ + + if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) { + ret = -EINVAL; +- v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", +- dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs, ++ v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", ++ __func__, dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs, + 1); + goto unreg_image_encoder; + } +@@ -1689,8 +1697,8 @@ static int mmal_init(struct bm2835_mmal_ + + if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) { + ret = -EINVAL; +- v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", +- dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs, ++ v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", ++ __func__, dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs, + 1); + goto unreg_vid_encoder; + } +@@ -1719,8 +1727,11 @@ static int mmal_init(struct bm2835_mmal_ + sizeof(enable)); + } + ret = bm2835_mmal_set_all_camera_controls(dev); +- if (ret < 0) ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, "%s: failed to set all camera controls: %d\n", ++ __func__, ret); + goto unreg_vid_encoder; ++ } + + return 0; + +@@ -1880,21 +1891,29 @@ static int bcm2835_mmal_probe(struct pla + snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), + "%s", BM2835_MMAL_MODULE_NAME); + ret = v4l2_device_register(NULL, &dev->v4l2_dev); +- if (ret) ++ if (ret) { ++ dev_err(&pdev->dev, "%s: could not register V4L2 device: %d\n", ++ __func__, ret); + goto free_dev; ++ } + + /* setup v4l controls */ + ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler); +- if (ret < 0) ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, "%s: could not init controls: %d\n", ++ __func__, ret); + goto unreg_dev; ++ } + dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler; + + /* mmal init */ + dev->instance = instance; + ret = mmal_init(dev); +- if (ret < 0) ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, "%s: mmal init failed: %d\n", ++ __func__, ret); + goto unreg_dev; +- ++ } + /* initialize queue */ + q = &dev->capture.vb_vidq; + memset(q, 0, sizeof(*q)); +@@ -1912,16 +1931,19 @@ static int bcm2835_mmal_probe(struct pla + + /* initialise video devices */ + ret = bm2835_mmal_init_device(dev, &dev->vdev); +- if (ret < 0) ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, "%s: could not init device: %d\n", ++ __func__, ret); + goto unreg_dev; ++ } + + /* Really want to call vidioc_s_fmt_vid_cap with the default + * format, but currently the APIs don't join up. + */ + ret = mmal_setup_components(dev, &default_v4l2_format); + if (ret < 0) { +- v4l2_err(&dev->v4l2_dev, +- "%s: could not setup components\n", __func__); ++ v4l2_err(&dev->v4l2_dev, "%s: could not setup components: %d\n", ++ __func__, ret); + goto unreg_dev; + } + +@@ -1945,8 +1967,6 @@ cleanup_gdev: + bcm2835_cleanup_instance(gdev[i]); + gdev[i] = NULL; + } +- pr_info("%s: error %d while loading driver\n", +- BM2835_MMAL_MODULE_NAME, ret); + + return ret; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0216-BCM2710_DT-fix-gpio-expander-bindings.patch b/target/linux/brcm2708/patches-4.19/950-0216-BCM2710_DT-fix-gpio-expander-bindings.patch deleted file mode 100644 index 3ca3340097..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0216-BCM2710_DT-fix-gpio-expander-bindings.patch +++ /dev/null @@ -1,67 +0,0 @@ -From d5a4fa7ba39e4f9e41271023e1be417204b8a2b7 Mon Sep 17 00:00:00 2001 -From: Nicolas Saenz Julienne -Date: Tue, 27 Nov 2018 16:59:10 +0100 -Subject: [PATCH 216/806] BCM2710_DT: fix gpio expander bindings - -The upstreamed driver for the GPIO expander expects to be a children of -the "firmware" node. - -The patch also removes the "firmware" phandle as it's useless. - -Signed-off-by: Nicolas Saenz Julienne ---- - arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 3 +-- - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 4 +++- - arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 4 +++- - 3 files changed, 7 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -@@ -83,12 +83,11 @@ - brcm,overclock-50 = <0>; - }; - --&soc { -+&firmware { - expgpio: expgpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; -- firmware = <&firmware>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -92,11 +92,13 @@ - status = "okay"; - }; - -+}; -+ -+&firmware { - expgpio: expgpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; -- firmware = <&firmware>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -@@ -53,11 +53,13 @@ - status = "okay"; - }; - -+}; -+ -+&firmware { - expgpio: expgpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; -- firmware = <&firmware>; - status = "okay"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0216-staging-bcm2835-camera-Add-hint-about-possible-fault.patch b/target/linux/brcm2708/patches-4.19/950-0216-staging-bcm2835-camera-Add-hint-about-possible-fault.patch new file mode 100644 index 0000000000..38409de017 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0216-staging-bcm2835-camera-Add-hint-about-possible-fault.patch @@ -0,0 +1,31 @@ +From 17eaf7c6e8dfcd76b4ed28587b07892e2a5a4ff5 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sun, 21 Oct 2018 19:08:29 +0200 +Subject: [PATCH] staging: bcm2835-camera: Add hint about possible + faulty GPU mem config + +As per default the GPU memory config of the Raspberry Pi isn't sufficient +for the camera usage. Even worse the bcm2835 camera doesn't provide a +helpful error message in this case. So let's add a hint to point the user +to the likely cause. + +Signed-off-by: Stefan Wahren +--- + drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c +@@ -1620,8 +1620,11 @@ int vchiq_mmal_component_init(struct vch + component = &instance->component[instance->component_idx]; + + ret = create_component(instance, component, name); +- if (ret < 0) ++ if (ret < 0) { ++ pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", ++ __func__, ret); + goto unlock; ++ } + + /* ports info needs gathering */ + component->control.type = MMAL_PORT_TYPE_CONTROL; diff --git a/target/linux/brcm2708/patches-4.19/950-0217-ARM-dts-bcm283x-The-lan7515-PHY-node-has-moved.patch b/target/linux/brcm2708/patches-4.19/950-0217-ARM-dts-bcm283x-The-lan7515-PHY-node-has-moved.patch deleted file mode 100644 index 4f7f451c45..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0217-ARM-dts-bcm283x-The-lan7515-PHY-node-has-moved.patch +++ /dev/null @@ -1,64 +0,0 @@ -From eb6864f9dc059e86d057822b493feb8b4a9684ba Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 27 Nov 2018 16:33:31 +0000 -Subject: [PATCH 217/806] ARM: dts: bcm283x: The lan7515 PHY node has moved - -The DT node describing the LAN7800s PHY has now moved inside an "mdio" -node. Update the DT declarations accordingly. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 31 ++++++++++++++-------- - 1 file changed, 20 insertions(+), 11 deletions(-) - ---- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -@@ -1,4 +1,6 @@ - // SPDX-License-Identifier: GPL-2.0 -+#include -+ - / { - aliases { - ethernet0 = ðernet; -@@ -21,13 +23,20 @@ - ethernet: ethernet@1 { - compatible = "usb424,7800"; - reg = <1>; -- microchip,eee-enabled; -- microchip,tx-lpi-timer = <600>; /* non-aggressive*/ -- /* -- * led0 = 1:link1000/activity -- * led1 = 6:link10/100/activity -- */ -- microchip,led-modes = <1 6>; -+ -+ mdio { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ eth_phy: ethernet-phy@1 { -+ reg = <1>; -+ microchip,eee-enabled; -+ microchip,tx-lpi-timer = <600>; /* non-aggressive*/ -+ microchip,led-modes = < -+ LAN78XX_LINK_1000_ACTIVITY -+ LAN78XX_LINK_10_100_ACTIVITY -+ >; -+ }; -+ }; - }; - }; - }; -@@ -36,9 +45,9 @@ - - / { - __overrides__ { -- eee = <ðernet>,"microchip,eee-enabled?"; -- tx_lpi_timer = <ðernet>,"microchip,tx-lpi-timer:0"; -- eth_led0 = <ðernet>,"microchip,led-modes:0"; -- eth_led1 = <ðernet>,"microchip,led-modes:4"; -+ eee = <ð_phy>,"microchip,eee-enabled?"; -+ tx_lpi_timer = <ð_phy>,"microchip,tx-lpi-timer:0"; -+ eth_led0 = <ð_phy>,"microchip,led-modes:0"; -+ eth_led1 = <ð_phy>,"microchip,led-modes:4"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0217-staging-bcm2835-Don-t-probe-if-no-camera-is-detected.patch b/target/linux/brcm2708/patches-4.19/950-0217-staging-bcm2835-Don-t-probe-if-no-camera-is-detected.patch new file mode 100644 index 0000000000..96236f36d5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0217-staging-bcm2835-Don-t-probe-if-no-camera-is-detected.patch @@ -0,0 +1,41 @@ +From b0ebcf556b543b0b509ad071584ca6b41076a2da Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Mon, 22 Oct 2018 11:09:18 +0200 +Subject: [PATCH] staging: bcm2835: Don't probe if no camera is + detected + +It is a waste of resources to load the camera driver in case there isn't +a camera actually connected to the Raspberry Pi. This solution also +avoids a NULL ptr dereference of mmal instance on driver unload. + +Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.") +Signed-off-by: Stefan Wahren +--- + .../vc04_services/bcm2835-camera/bcm2835-camera.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -1860,6 +1860,12 @@ static int bcm2835_mmal_probe(struct pla + num_cameras = get_num_cameras(instance, + resolutions, + MAX_BCM2835_CAMERAS); ++ ++ if (num_cameras < 1) { ++ ret = -ENODEV; ++ goto cleanup_mmal; ++ } ++ + if (num_cameras > MAX_BCM2835_CAMERAS) + num_cameras = MAX_BCM2835_CAMERAS; + +@@ -1968,6 +1974,9 @@ cleanup_gdev: + gdev[i] = NULL; + } + ++cleanup_mmal: ++ vchiq_mmal_finalise(instance); ++ + return ret; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0218-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch b/target/linux/brcm2708/patches-4.19/950-0218-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch deleted file mode 100644 index ab6c83db8c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0218-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch +++ /dev/null @@ -1,83 +0,0 @@ -From a3c59bad71de2b3c09a25fd6ce5e3632c33c4bba Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 26 Nov 2018 19:46:58 +0000 -Subject: [PATCH 218/806] net: lan78xx: Support auto-downshift to 100Mb/s - -Ethernet cables with faulty or missing pairs (specifically pairs C and -D) allow auto-negotiation to 1000Mbs, but do not support the successful -establishment of a link. Add a DT property, "microchip,downshift-after", -to configure the number of auto-negotiation failures after which it -falls back to 100Mbs. Valid values are 2, 3, 4, 5 and 0, where 0 means -never downshift. - -Signed-off-by: Phil Elwell ---- - drivers/net/phy/microchip.c | 32 ++++++++++++++++++++++++++++++++ - include/linux/microchipphy.h | 8 ++++++++ - 2 files changed, 40 insertions(+) - ---- a/drivers/net/phy/microchip.c -+++ b/drivers/net/phy/microchip.c -@@ -228,6 +228,7 @@ static int lan88xx_probe(struct phy_devi - struct device *dev = &phydev->mdio.dev; - struct lan88xx_priv *priv; - u32 led_modes[4]; -+ u32 downshift_after = 0; - int len; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -@@ -257,6 +258,37 @@ static int lan88xx_probe(struct phy_devi - return -EINVAL; - } - -+ if (!of_property_read_u32(dev->of_node, -+ "microchip,downshift-after", -+ &downshift_after)) { -+ u32 mask = LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK; -+ u32 val = LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT; -+ -+ switch (downshift_after) { -+ case 2: -+ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2; -+ break; -+ case 3: -+ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3; -+ break; -+ case 4: -+ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4; -+ break; -+ case 5: -+ val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5; -+ break; -+ case 0: -+ /* Disable completely */ -+ mask = LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT; -+ val = 0; -+ break; -+ default: -+ return -EINVAL; -+ } -+ (void)phy_modify_paged(phydev, 1, LAN78XX_PHY_CTRL3, -+ mask, val); -+ } -+ - /* these values can be used to identify internal PHY */ - priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID); - priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV); ---- a/include/linux/microchipphy.h -+++ b/include/linux/microchipphy.h -@@ -73,6 +73,14 @@ - /* Registers specific to the LAN7800/LAN7850 embedded phy */ - #define LAN78XX_PHY_LED_MODE_SELECT (0x1D) - -+#define LAN78XX_PHY_CTRL3 (0x14) -+#define LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT (0x0010) -+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK (0x000c) -+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2 (0x0000) -+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3 (0x0004) -+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4 (0x0008) -+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5 (0x000c) -+ - /* DSP registers */ - #define PHY_ARDENNES_MMD_DEV_3_PHY_CFG (0x806A) - #define PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_ (0x2000) diff --git a/target/linux/brcm2708/patches-4.19/950-0218-staging-vchiq_arm-Improve-error-handling-on-loading-.patch b/target/linux/brcm2708/patches-4.19/950-0218-staging-vchiq_arm-Improve-error-handling-on-loading-.patch new file mode 100644 index 0000000000..81328b2cdc --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0218-staging-vchiq_arm-Improve-error-handling-on-loading-.patch @@ -0,0 +1,45 @@ +From 73979b06255c3b7b536a53d09ea095aec8ed37aa Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 3 Dec 2018 12:50:38 +0000 +Subject: [PATCH] staging: vchiq_arm: Improve error handling on loading + drivers + +The handling of loading platform drivers requires checking IS_ERR +for the pointer on unload. +If the driver fails to load, NULL the pointer during probe as +platform_device_unregister already checks for NULL. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 12 ++++++++---- + 1 file changed, 8 insertions(+), 4 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -3655,7 +3655,11 @@ static int vchiq_probe(struct platform_d + MAJOR(vchiq_devid), MINOR(vchiq_devid)); + + bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); ++ if (IS_ERR(bcm2835_camera)) ++ bcm2835_camera = NULL; + bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio"); ++ if (IS_ERR(bcm2835_audio)) ++ bcm2835_audio = NULL; + + return 0; + +@@ -3672,10 +3676,10 @@ failed_platform_init: + + static int vchiq_remove(struct platform_device *pdev) + { +- if (!IS_ERR(bcm2835_audio)) +- platform_device_unregister(bcm2835_audio); +- if (!IS_ERR(bcm2835_camera)) +- platform_device_unregister(bcm2835_camera); ++ platform_device_unregister(bcm2835_codec); ++ platform_device_unregister(bcm2835_audio); ++ platform_device_unregister(bcm2835_camera); ++ platform_device_unregister(vcsm_cma); + vchiq_debugfs_deinit(); + device_destroy(vchiq_class, vchiq_devid); + class_destroy(vchiq_class); diff --git a/target/linux/brcm2708/patches-4.19/950-0219-dt-bindings-Document-microchip-downshift-after.patch b/target/linux/brcm2708/patches-4.19/950-0219-dt-bindings-Document-microchip-downshift-after.patch deleted file mode 100644 index 2096f389db..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0219-dt-bindings-Document-microchip-downshift-after.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 1654bdce95bd9a99e237b75fdcc0081b232c46b5 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 28 Nov 2018 15:51:41 +0000 -Subject: [PATCH 219/806] dt-bindings: Document microchip,downshift-after - -Document the optional downshift-after property of the lan78xx's PHY. - -Signed-off-by: Phil Elwell ---- - Documentation/devicetree/bindings/net/microchip,lan78xx.txt | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt -+++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt -@@ -15,6 +15,9 @@ Optional properties of the embedded PHY: - - microchip,led-modes: a 0..4 element vector, with each element configuring - the operating mode of an LED. Omitted LEDs are turned off. Allowed values - are defined in "include/dt-bindings/net/microchip-lan78xx.h". -+- microchip,downshift-after: sets the number of failed auto-negotiation -+ attempts after which the link is downgraded from 1000BASE-T. Should be one of -+ 2, 3, 4, 5 or 0, where 0 means never downshift. - - Example: - diff --git a/target/linux/brcm2708/patches-4.19/950-0219-staging-bcm2835-camera-Do-not-bulk-receive-from-serv.patch b/target/linux/brcm2708/patches-4.19/950-0219-staging-bcm2835-camera-Do-not-bulk-receive-from-serv.patch new file mode 100644 index 0000000000..9d2ae1bb3a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0219-staging-bcm2835-camera-Do-not-bulk-receive-from-serv.patch @@ -0,0 +1,197 @@ +From 522f1499310d389e663a4e8dd0ccbb916b768766 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 14 Feb 2018 17:04:26 +0000 +Subject: [PATCH] staging: bcm2835-camera: Do not bulk receive from + service thread + +vchi_bulk_queue_receive will queue up to a default of 4 +bulk receives on a connection before blocking. +If called from the VCHI service_callback thread, then +that thread is unable to service the VCHI_CALLBACK_BULK_RECEIVED +events that would enable the queue call to succeed. + +Add a workqueue to schedule the call vchi_bulk_queue_receive +in an alternate context to avoid the lock up. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-camera/mmal-vchiq.c | 101 ++++++++++-------- + 1 file changed, 59 insertions(+), 42 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c +@@ -118,8 +118,10 @@ struct mmal_msg_context { + + union { + struct { +- /* work struct for defered callback - must come first */ ++ /* work struct for buffer_cb callback */ + struct work_struct work; ++ /* work struct for deferred callback */ ++ struct work_struct buffer_to_host_work; + /* mmal instance */ + struct vchiq_mmal_instance *instance; + /* mmal port */ +@@ -168,6 +170,9 @@ struct vchiq_mmal_instance { + /* component to use next */ + int component_idx; + struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS]; ++ ++ /* ordered workqueue to process all bulk operations */ ++ struct workqueue_struct *bulk_wq; + }; + + static struct mmal_msg_context * +@@ -251,7 +256,44 @@ static void buffer_work_cb(struct work_s + msg_context->u.bulk.mmal_flags, + msg_context->u.bulk.dts, + msg_context->u.bulk.pts); ++} + ++/* workqueue scheduled callback to handle receiving buffers ++ * ++ * VCHI will allow up to 4 bulk receives to be scheduled before blocking. ++ * If we block in the service_callback context then we can't process the ++ * VCHI_CALLBACK_BULK_RECEIVED message that would otherwise allow the blocked ++ * vchi_bulk_queue_receive() call to complete. ++ */ ++static void buffer_to_host_work_cb(struct work_struct *work) ++{ ++ struct mmal_msg_context *msg_context = ++ container_of(work, struct mmal_msg_context, ++ u.bulk.buffer_to_host_work); ++ struct vchiq_mmal_instance *instance = msg_context->instance; ++ unsigned long len = msg_context->u.bulk.buffer_used; ++ int ret; ++ ++ if (!len) ++ /* Dummy receive to ensure the buffers remain in order */ ++ len = 8; ++ /* queue the bulk submission */ ++ vchi_service_use(instance->handle); ++ ret = vchi_bulk_queue_receive(instance->handle, ++ msg_context->u.bulk.buffer->buffer, ++ /* Actual receive needs to be a multiple ++ * of 4 bytes ++ */ ++ (len + 3) & ~3, ++ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, ++ msg_context); ++ ++ vchi_service_release(instance->handle); ++ ++ if (ret != 0) ++ pr_err("%s: ctx: %p, vchi_bulk_queue_receive failed %d\n", ++ __func__, msg_context, ret); + } + + /* enqueue a bulk receive for a given message context */ +@@ -260,7 +302,6 @@ static int bulk_receive(struct vchiq_mma + struct mmal_msg_context *msg_context) + { + unsigned long rd_len; +- int ret; + + rd_len = msg->u.buffer_from_host.buffer_header.length; + +@@ -294,45 +335,10 @@ static int bulk_receive(struct vchiq_mma + msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; + msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; + +- /* queue the bulk submission */ +- vchi_service_use(instance->handle); +- ret = vchi_bulk_queue_receive(instance->handle, +- msg_context->u.bulk.buffer->buffer, +- /* Actual receive needs to be a multiple +- * of 4 bytes +- */ +- (rd_len + 3) & ~3, +- VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | +- VCHI_FLAGS_BLOCK_UNTIL_QUEUED, +- msg_context); +- +- vchi_service_release(instance->handle); ++ queue_work(msg_context->instance->bulk_wq, ++ &msg_context->u.bulk.buffer_to_host_work); + +- return ret; +-} +- +-/* enque a dummy bulk receive for a given message context */ +-static int dummy_bulk_receive(struct vchiq_mmal_instance *instance, +- struct mmal_msg_context *msg_context) +-{ +- int ret; +- +- /* zero length indicates this was a dummy transfer */ +- msg_context->u.bulk.buffer_used = 0; +- +- /* queue the bulk submission */ +- vchi_service_use(instance->handle); +- +- ret = vchi_bulk_queue_receive(instance->handle, +- instance->bulk_scratch, +- 8, +- VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | +- VCHI_FLAGS_BLOCK_UNTIL_QUEUED, +- msg_context); +- +- vchi_service_release(instance->handle); +- +- return ret; ++ return 0; + } + + /* data in message, memcpy from packet into output buffer */ +@@ -380,6 +386,8 @@ buffer_from_host(struct vchiq_mmal_insta + + /* initialise work structure ready to schedule callback */ + INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb); ++ INIT_WORK(&msg_context->u.bulk.buffer_to_host_work, ++ buffer_to_host_work_cb); + + atomic_inc(&port->buffers_with_vpu); + +@@ -465,7 +473,7 @@ static void buffer_to_host_cb(struct vch + if (msg->u.buffer_from_host.buffer_header.flags & + MMAL_BUFFER_HEADER_FLAG_EOS) { + msg_context->u.bulk.status = +- dummy_bulk_receive(instance, msg_context); ++ bulk_receive(instance, msg, msg_context); + if (msg_context->u.bulk.status == 0) + return; /* successful bulk submission, bulk + * completion will trigger callback +@@ -1789,6 +1797,9 @@ int vchiq_mmal_finalise(struct vchiq_mma + + mutex_unlock(&instance->vchiq_mutex); + ++ flush_workqueue(instance->bulk_wq); ++ destroy_workqueue(instance->bulk_wq); ++ + vfree(instance->bulk_scratch); + + idr_destroy(&instance->context_map); +@@ -1858,6 +1869,11 @@ int vchiq_mmal_init(struct vchiq_mmal_in + + params.callback_param = instance; + ++ instance->bulk_wq = alloc_ordered_workqueue("mmal-vchiq", ++ WQ_MEM_RECLAIM); ++ if (!instance->bulk_wq) ++ goto err_free; ++ + status = vchi_service_open(vchi_instance, ¶ms, &instance->handle); + if (status) { + pr_err("Failed to open VCHI service connection (status=%d)\n", +@@ -1872,8 +1888,9 @@ int vchiq_mmal_init(struct vchiq_mmal_in + return 0; + + err_close_services: +- + vchi_service_close(instance->handle); ++ destroy_workqueue(instance->bulk_wq); ++err_free: + vfree(instance->bulk_scratch); + kfree(instance); + return -ENODEV; diff --git a/target/linux/brcm2708/patches-4.19/950-0220-ARM-dts-bcm283x-Set-downshift-after-for-Pi-3B.patch b/target/linux/brcm2708/patches-4.19/950-0220-ARM-dts-bcm283x-Set-downshift-after-for-Pi-3B.patch deleted file mode 100644 index c5d7d6cd93..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0220-ARM-dts-bcm283x-Set-downshift-after-for-Pi-3B.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 036c72ed4475afb757af568d40db0973a5dafcc8 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 27 Nov 2018 16:55:14 +0000 -Subject: [PATCH 220/806] ARM: dts: bcm283x: Set downshift-after for Pi 3B+ - -Enable the auto-downshift feature on Raspberry Pi 3B+ so that a link -can eventually be established using a cable with pairs C and/or D -missing or broken in a 1000Mbps-capable port. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -@@ -31,6 +31,7 @@ - reg = <1>; - microchip,eee-enabled; - microchip,tx-lpi-timer = <600>; /* non-aggressive*/ -+ microchip,downshift-after = <2>; - microchip,led-modes = < - LAN78XX_LINK_1000_ACTIVITY - LAN78XX_LINK_10_100_ACTIVITY diff --git a/target/linux/brcm2708/patches-4.19/950-0220-staging-bcm2835-camera-Ensure-H264-header-bytes-get-.patch b/target/linux/brcm2708/patches-4.19/950-0220-staging-bcm2835-camera-Ensure-H264-header-bytes-get-.patch new file mode 100644 index 0000000000..12afc4a1f8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0220-staging-bcm2835-camera-Ensure-H264-header-bytes-get-.patch @@ -0,0 +1,87 @@ +From bf5bbfec3cb99c469eb59f2b19411146c47feb73 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 29 Oct 2018 14:21:04 +0000 +Subject: [PATCH] staging: bcm2835-camera: Ensure H264 header bytes get + a sensible timestamp + +H264 header come from VC with 0 timestamps, which means they get a +strange timestamp when processed with VC/kernel start times, +particularly if used with the inline header option. +Remember the last frame timestamp and use that if set, or otherwise +use the kernel start time. + +https://github.com/raspberrypi/linux/issues/1836 + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/bcm2835-camera.c | 30 +++++++++++++++++-- + .../bcm2835-camera/bcm2835-camera.h | 2 ++ + 2 files changed, 29 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -363,8 +363,13 @@ static void buffer_cb(struct vchiq_mmal_ + } + } else { + if (dev->capture.frame_count) { +- if (dev->capture.vc_start_timestamp != -1 && +- pts != 0) { ++ if (dev->capture.vc_start_timestamp == -1) { ++ buf->vb.vb2_buf.timestamp = ktime_get_ns(); ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer time set as current time - %lld", ++ buf->vb.vb2_buf.timestamp); ++ ++ } else if (pts != 0) { + ktime_t timestamp; + s64 runtime_us = pts - + dev->capture.vc_start_timestamp; +@@ -377,10 +382,28 @@ static void buffer_cb(struct vchiq_mmal_ + ktime_to_ns(timestamp)); + buf->vb.vb2_buf.timestamp = ktime_to_ns(timestamp); + } else { +- buf->vb.vb2_buf.timestamp = ktime_get_ns(); ++ if (dev->capture.last_timestamp) { ++ buf->vb.vb2_buf.timestamp = ++ dev->capture.last_timestamp; ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "Buffer time set as last timestamp - %lld", ++ buf->vb.vb2_buf.timestamp); ++ } else { ++ buf->vb.vb2_buf.timestamp = ++ ktime_to_ns(dev->capture.kernel_start_ts); ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "Buffer time set as start timestamp - %lld", ++ buf->vb.vb2_buf.timestamp); ++ } + } ++ dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer has ts %llu", ++ dev->capture.last_timestamp); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); + + if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && +@@ -546,6 +569,7 @@ static int start_streaming(struct vb2_qu + dev->capture.vc_start_timestamp, parameter_size); + + dev->capture.kernel_start_ts = ktime_get(); ++ dev->capture.last_timestamp = 0; + + /* enable the camera port */ + dev->capture.port->cb_ctx = dev; +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h +@@ -90,6 +90,8 @@ struct bm2835_mmal_dev { + s64 vc_start_timestamp; + /* Kernel start timestamp for streaming */ + ktime_t kernel_start_ts; ++ /* Timestamp of last frame */ ++ u64 last_timestamp; + + struct vchiq_mmal_port *port; /* port being used for capture */ + /* camera port being used for capture */ diff --git a/target/linux/brcm2708/patches-4.19/950-0221-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch b/target/linux/brcm2708/patches-4.19/950-0221-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch deleted file mode 100644 index b4b2d28ce9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0221-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 18867d71460b80385146e8d91a23cfb1729858f8 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 27 Nov 2018 16:56:50 +0000 -Subject: [PATCH 221/806] BCM270X_DT: Add new Ethernet DT parameters - -Add "eth_downshift_after" DT parameter to allow the delay before the -downshift to be specified. The default is 2 auto-negotiation cycles, -and legal values are 2, 3, 4, 5 and 0 (disabled). - -Add "eth_max_speed" DT parameter as a way of prohibiting 1000Mbps -links. This can be used to avoid the delay until the downshift mechanism -activates. Legal values are 10, 100 and 1000, where the default is -unlimited (effectively 1000Mbps). - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 2 ++ - arch/arm/boot/dts/overlays/README | 9 +++++++++ - 2 files changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -@@ -50,5 +50,7 @@ - tx_lpi_timer = <ð_phy>,"microchip,tx-lpi-timer:0"; - eth_led0 = <ð_phy>,"microchip,led-modes:0"; - eth_led1 = <ð_phy>,"microchip,led-modes:4"; -+ eth_downshift_after = <ð_phy>,"microchip,downshift-after"; -+ eth_max_speed = <ð_phy>,"max-speed:0"; - }; - }; ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -98,6 +98,11 @@ Params: - compatible devices (default "on"). See also - "tx_lpi_timer". - -+ eth_downshift_after Set the number of auto-negotiation failures -+ after which the 1000Mbps modes are disabled. -+ Legal values are 2, 3, 4, 5 and 0, where -+ 0 means never downshift (default 2). -+ - eth_led0 Set mode of LED0 (usually orange) (default - "1"). The legal values are: - 0=link/activity 1=link1000/activity -@@ -108,6 +113,10 @@ Params: - eth_led1 Set mode of LED1 (usually green) (default - "6"). See eth_led0 for legal values. - -+ eth_max_speed Set the maximum speed a link is allowed -+ to negotiate. Legal values are 10, 100 and -+ 1000 (default 1000). -+ - i2c_arm Set to "on" to enable the ARM's i2c interface - (default "off") - diff --git a/target/linux/brcm2708/patches-4.19/950-0221-staging-bcm2835-camera-Correctly-denote-key-frames-i.patch b/target/linux/brcm2708/patches-4.19/950-0221-staging-bcm2835-camera-Correctly-denote-key-frames-i.patch new file mode 100644 index 0000000000..96116cb8d5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0221-staging-bcm2835-camera-Correctly-denote-key-frames-i.patch @@ -0,0 +1,25 @@ +From 6c70a89ac19b1ead96be68002affcd1821014d52 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 13 Feb 2017 13:11:41 +0000 +Subject: [PATCH] staging: bcm2835-camera: Correctly denote key frames + in encoded data + +Forward MMAL key frame flags to the V4L2 buffers. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -401,6 +401,9 @@ static void buffer_cb(struct vchiq_mmal_ + dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); ++ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) ++ buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; ++ + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "Buffer has ts %llu", + dev->capture.last_timestamp); diff --git a/target/linux/brcm2708/patches-4.19/950-0222-BCM270X_DT-Mark-eth_downshift_after-as-an-integer.patch b/target/linux/brcm2708/patches-4.19/950-0222-BCM270X_DT-Mark-eth_downshift_after-as-an-integer.patch deleted file mode 100644 index 2489597359..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0222-BCM270X_DT-Mark-eth_downshift_after-as-an-integer.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 3cc51f4d633b33f732a52d1ec2b041a28b55c7d5 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 29 Nov 2018 16:00:22 +0000 -Subject: [PATCH 222/806] BCM270X_DT: Mark eth_downshift_after as an integer - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -@@ -50,7 +50,7 @@ - tx_lpi_timer = <ð_phy>,"microchip,tx-lpi-timer:0"; - eth_led0 = <ð_phy>,"microchip,led-modes:0"; - eth_led1 = <ð_phy>,"microchip,led-modes:4"; -- eth_downshift_after = <ð_phy>,"microchip,downshift-after"; -+ eth_downshift_after = <ð_phy>,"microchip,downshift-after:0"; - eth_max_speed = <ð_phy>,"max-speed:0"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0222-staging-bcm2835-camera-Return-early-on-errors.patch b/target/linux/brcm2708/patches-4.19/950-0222-staging-bcm2835-camera-Return-early-on-errors.patch new file mode 100644 index 0000000000..616cacefa2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0222-staging-bcm2835-camera-Return-early-on-errors.patch @@ -0,0 +1,196 @@ +From 3cb19cb6b4d6dc86582abef6200c0fc663ae3f2a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 10 Mar 2017 17:27:56 +0000 +Subject: [PATCH] staging: bcm2835-camera: Return early on errors + +Fix several instances where it is easier to return +early on error conditions than handle it as an else +clause. +As requested by Mauro. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/bcm2835-camera.c | 137 +++++++++--------- + 1 file changed, 71 insertions(+), 66 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -335,7 +335,9 @@ static void buffer_cb(struct vchiq_mmal_ + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + } + return; +- } else if (length == 0) { ++ } ++ ++ if (length == 0) { + /* stream ended */ + if (dev->capture.frame_count) { + /* empty buffer whilst capturing - expected to be an +@@ -361,71 +363,72 @@ static void buffer_cb(struct vchiq_mmal_ + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + complete(&dev->capture.frame_cmplt); + } +- } else { +- if (dev->capture.frame_count) { +- if (dev->capture.vc_start_timestamp == -1) { +- buf->vb.vb2_buf.timestamp = ktime_get_ns(); +- v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, +- "Buffer time set as current time - %lld", +- buf->vb.vb2_buf.timestamp); +- +- } else if (pts != 0) { +- ktime_t timestamp; +- s64 runtime_us = pts - +- dev->capture.vc_start_timestamp; +- timestamp = ktime_add_us(dev->capture.kernel_start_ts, +- runtime_us); +- v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, +- "Convert start time %llu and %llu with offset %llu to %llu\n", +- ktime_to_ns(dev->capture.kernel_start_ts), +- dev->capture.vc_start_timestamp, pts, +- ktime_to_ns(timestamp)); +- buf->vb.vb2_buf.timestamp = ktime_to_ns(timestamp); +- } else { +- if (dev->capture.last_timestamp) { +- buf->vb.vb2_buf.timestamp = +- dev->capture.last_timestamp; +- v4l2_dbg(1, bcm2835_v4l2_debug, +- &dev->v4l2_dev, +- "Buffer time set as last timestamp - %lld", +- buf->vb.vb2_buf.timestamp); +- } else { +- buf->vb.vb2_buf.timestamp = +- ktime_to_ns(dev->capture.kernel_start_ts); +- v4l2_dbg(1, bcm2835_v4l2_debug, +- &dev->v4l2_dev, +- "Buffer time set as start timestamp - %lld", +- buf->vb.vb2_buf.timestamp); +- } +- } +- dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; ++ return; ++ } + +- vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); +- if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) +- buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; ++ if (!dev->capture.frame_count) { ++ /* signal frame completion */ ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ complete(&dev->capture.frame_cmplt); ++ return; ++ } + ++ if (dev->capture.vc_start_timestamp == -1) { ++ /* ++ * VPU doesn't support MMAL_PARAMETER_SYSTEM_TIME, rely on ++ * kernel time, and have no latency compensation. ++ */ ++ buf->vb.vb2_buf.timestamp = ktime_get_ns(); ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer time set as current time - %lld", ++ buf->vb.vb2_buf.timestamp); ++ } else if (pts != 0) { ++ ktime_t timestamp; ++ s64 runtime_us = pts - ++ dev->capture.vc_start_timestamp; ++ timestamp = ktime_add_us(dev->capture.kernel_start_ts, ++ runtime_us); ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Convert start time %llu and %llu with offset %llu to %llu\n", ++ ktime_to_ns(dev->capture.kernel_start_ts), ++ dev->capture.vc_start_timestamp, pts, ++ ktime_to_ns(timestamp)); ++ buf->vb.vb2_buf.timestamp = ktime_to_ns(timestamp); ++ } else { ++ if (dev->capture.last_timestamp) { ++ buf->vb.vb2_buf.timestamp = dev->capture.last_timestamp; + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, +- "Buffer has ts %llu", +- dev->capture.last_timestamp); +- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); +- +- if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && +- is_capturing(dev)) { +- v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, +- "Grab another frame as buffer has EOS"); +- vchiq_mmal_port_parameter_set( +- instance, +- dev->capture.camera_port, +- MMAL_PARAMETER_CAPTURE, +- &dev->capture.frame_count, +- sizeof(dev->capture.frame_count)); +- } ++ "Buffer time set as last timestamp - %lld", ++ buf->vb.vb2_buf.timestamp); + } else { +- /* signal frame completion */ +- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); +- complete(&dev->capture.frame_cmplt); ++ buf->vb.vb2_buf.timestamp = ++ ktime_to_ns(dev->capture.kernel_start_ts); ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer time set as start timestamp - %lld", ++ buf->vb.vb2_buf.timestamp); + } + } ++ dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; ++ ++ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); ++ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) ++ buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer has ts %llu", ++ dev->capture.last_timestamp); ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); ++ ++ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && ++ is_capturing(dev)) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Grab another frame as buffer has EOS"); ++ vchiq_mmal_port_parameter_set(instance, ++ dev->capture.camera_port, ++ MMAL_PARAMETER_CAPTURE, ++ &dev->capture.frame_count, ++ sizeof(dev->capture.frame_count)); ++ } + } + + static int enable_camera(struct bm2835_mmal_dev *dev) +@@ -815,27 +818,29 @@ static int vidioc_overlay(struct file *f + + ret = vchiq_mmal_port_set_format(dev->instance, src); + if (ret < 0) +- goto error; ++ return ret; + + ret = set_overlay_params(dev, dst); + if (ret < 0) +- goto error; ++ return ret; + +- if (enable_camera(dev) < 0) +- goto error; ++ if (enable_camera(dev) < 0) { ++ ret = -EINVAL; ++ return ret; ++ } + + ret = vchiq_mmal_component_enable( + dev->instance, + dev->component[MMAL_COMPONENT_PREVIEW]); + if (ret < 0) +- goto error; ++ return ret; + + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "connecting %p to %p\n", + src, dst); + ret = vchiq_mmal_port_connect_tunnel(dev->instance, src, dst); + if (!ret) + ret = vchiq_mmal_port_enable(dev->instance, src, NULL); +-error: ++ + return ret; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0223-dwc-otg-FIQ-Fix-bad-mode-in-data-abort-handler.patch b/target/linux/brcm2708/patches-4.19/950-0223-dwc-otg-FIQ-Fix-bad-mode-in-data-abort-handler.patch deleted file mode 100644 index 56230e14ed..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0223-dwc-otg-FIQ-Fix-bad-mode-in-data-abort-handler.patch +++ /dev/null @@ -1,128 +0,0 @@ -From f36b3119d83e03c9d0c684b8712b66a979c48124 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 16 Jul 2018 14:40:13 +0100 -Subject: [PATCH 223/806] dwc-otg: FIQ: Fix "bad mode in data abort handler" - -Create a semi-static mapping for the USB registers early in the boot -process, before additional kernel threads are started, so all threads -will have the mappings from the start. This avoids the need for -data aborts to lazily update them. - -See: https://github.com/raspberrypi/linux/issues/2450 - -Signed-off-by: Floris Bos ---- - arch/arm/mach-bcm/board_bcm2835.c | 69 +++++++++++++++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_driver.c | 2 +- - 2 files changed, 70 insertions(+), 1 deletion(-) - ---- a/arch/arm/mach-bcm/board_bcm2835.c -+++ b/arch/arm/mach-bcm/board_bcm2835.c -@@ -15,6 +15,7 @@ - #include - #include - #include -+#include - #include - - #include -@@ -22,6 +23,9 @@ - - #include "platsmp.h" - -+#define BCM2835_USB_VIRT_BASE 0xf0980000 -+#define BCM2835_USB_VIRT_MPHI 0xf0006000 -+ - static void __init bcm2835_init(void) - { - struct device_node *np = of_find_node_by_path("/system"); -@@ -34,6 +38,70 @@ static void __init bcm2835_init(void) - system_serial_low = val64; - } - -+/* -+ * We need to map registers that are going to be accessed by the FIQ -+ * very early, before any kernel threads are spawned. Because if done -+ * later, the mapping tables are not updated instantly but lazily upon -+ * first access through a data abort handler. While that is fine -+ * when executing regular kernel code, if the first access in a specific -+ * thread happens while running FIQ code this will result in a panic. -+ * -+ * For more background see the following old mailing list thread: -+ * https://www.spinics.net/lists/arm-kernel/msg325250.html -+ */ -+static int __init bcm2835_map_usb(unsigned long node, const char *uname, -+ int depth, void *data) -+{ -+ struct map_desc map[2]; -+ const __be32 *reg; -+ int len; -+ unsigned long p2b_offset = *((unsigned long *) data); -+ -+ if (!of_flat_dt_is_compatible(node, "brcm,bcm2708-usb")) -+ return 0; -+ reg = of_get_flat_dt_prop(node, "reg", &len); -+ if (!reg || len != (sizeof(unsigned long) * 4)) -+ return 0; -+ -+ /* Use information about the physical addresses of the -+ * registers from the device tree, but use legacy -+ * iotable_init() static mapping function to map them, -+ * as ioremap() is not functional at this stage in boot. -+ */ -+ map[0].virtual = (unsigned long) BCM2835_USB_VIRT_BASE; -+ map[0].pfn = __phys_to_pfn(be32_to_cpu(reg[0]) - p2b_offset); -+ map[0].length = be32_to_cpu(reg[1]); -+ map[0].type = MT_DEVICE; -+ map[1].virtual = (unsigned long) BCM2835_USB_VIRT_MPHI; -+ map[1].pfn = __phys_to_pfn(be32_to_cpu(reg[2]) - p2b_offset); -+ map[1].length = be32_to_cpu(reg[3]); -+ map[1].type = MT_DEVICE; -+ iotable_init(map, 2); -+ -+ return 1; -+} -+ -+static void __init bcm2835_map_io(void) -+{ -+ const __be32 *ranges; -+ int soc, len; -+ unsigned long p2b_offset; -+ -+ debug_ll_io_init(); -+ -+ /* Find out how to map bus to physical address first from soc/ranges */ -+ soc = of_get_flat_dt_subnode_by_name(of_get_flat_dt_root(), "soc"); -+ if (soc < 0) -+ return; -+ ranges = of_get_flat_dt_prop(soc, "ranges", &len); -+ if (!ranges || len < (sizeof(unsigned long) * 3)) -+ return; -+ p2b_offset = be32_to_cpu(ranges[0]) - be32_to_cpu(ranges[1]); -+ -+ /* Now search for bcm2708-usb node in device tree */ -+ of_scan_flat_dt(bcm2835_map_usb, &p2b_offset); -+} -+ - static const char * const bcm2835_compat[] = { - #ifdef CONFIG_ARCH_MULTI_V6 - "brcm,bcm2835", -@@ -46,6 +114,7 @@ static const char * const bcm2835_compat - }; - - DT_MACHINE_START(BCM2835, "BCM2835") -+ .map_io = bcm2835_map_io, - .init_machine = bcm2835_init, - .dt_compat = bcm2835_compat, - .smp = smp_ops(bcm2836_smp_ops), ---- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c -@@ -837,7 +837,7 @@ static int dwc_otg_driver_probe( - retval = -ENOMEM; - goto fail; - } -- dev_dbg(&_dev->dev, "base=0x%08x\n", -+ dev_info(&_dev->dev, "base=0x%08x\n", - (unsigned)dwc_otg_device->os_dep.base); - #endif - diff --git a/target/linux/brcm2708/patches-4.19/950-0223-staging-bcm2835-camera-Remove-dead-email-addresses.patch b/target/linux/brcm2708/patches-4.19/950-0223-staging-bcm2835-camera-Remove-dead-email-addresses.patch new file mode 100644 index 0000000000..2041ebbd72 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0223-staging-bcm2835-camera-Remove-dead-email-addresses.patch @@ -0,0 +1,241 @@ +From b1d4e377b4a8c73396d50c45106f3d3a710b11f5 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 10 Mar 2017 17:35:38 +0000 +Subject: [PATCH] staging: bcm2835-camera: Remove dead email addresses + +None of the listed author email addresses were valid. +Keep list of authors and the companies they represented. +Update my email address. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-camera/bcm2835-camera.c | 9 +++++---- + .../vc04_services/bcm2835-camera/bcm2835-camera.h | 9 +++++---- + drivers/staging/vc04_services/bcm2835-camera/controls.c | 9 +++++---- + .../staging/vc04_services/bcm2835-camera/mmal-common.h | 9 +++++---- + .../vc04_services/bcm2835-camera/mmal-encodings.h | 9 +++++---- + .../vc04_services/bcm2835-camera/mmal-msg-common.h | 9 +++++---- + .../vc04_services/bcm2835-camera/mmal-msg-format.h | 9 +++++---- + .../staging/vc04_services/bcm2835-camera/mmal-msg-port.h | 9 +++++---- + drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h | 9 +++++---- + .../vc04_services/bcm2835-camera/mmal-parameters.h | 9 +++++---- + .../staging/vc04_services/bcm2835-camera/mmal-vchiq.c | 9 +++++---- + .../staging/vc04_services/bcm2835-camera/mmal-vchiq.h | 9 +++++---- + 12 files changed, 60 insertions(+), 48 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + */ + + #include +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + * + * core driver device + */ +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + */ + + #include +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + * + * MMAL structures + * +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-encodings.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-encodings.h +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + */ + #ifndef MMAL_ENCODINGS_H + #define MMAL_ENCODINGS_H +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-common.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-common.h +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + */ + + #ifndef MMAL_MSG_COMMON_H +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + */ + + #ifndef MMAL_MSG_FORMAT_H +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + */ + + /* MMAL_PORT_TYPE_T */ +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + */ + + /* all the data structures which serialise the MMAL protocol. note +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + */ + + /* common parameters */ +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + * + * V4L2 driver MMAL vchiq interface code + */ +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h +@@ -4,10 +4,11 @@ + * + * Copyright © 2013 Raspberry Pi (Trading) Ltd. + * +- * Authors: Vincent Sanders +- * Dave Stevenson +- * Simon Mellor +- * Luke Diamand ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom + * + * MMAL interface to VCHIQ message passing + */ diff --git a/target/linux/brcm2708/patches-4.19/950-0224-lirc-rpi-Remove-in-favour-of-gpio-ir.patch b/target/linux/brcm2708/patches-4.19/950-0224-lirc-rpi-Remove-in-favour-of-gpio-ir.patch deleted file mode 100644 index 75a6d004ae..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0224-lirc-rpi-Remove-in-favour-of-gpio-ir.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 28b591dadb504861cdc535d5705aa4c8c3d3420f Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Fri, 30 Nov 2018 18:55:23 +0000 -Subject: [PATCH 224/806] lirc-rpi: Remove in favour of gpio-ir - ---- - arch/arm/boot/dts/overlays/Makefile | 1 - - .../boot/dts/overlays/lirc-rpi-overlay.dts | 57 ------------------- - 2 files changed, 58 deletions(-) - delete mode 100644 arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -68,7 +68,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - jedec-spi-nor.dtbo \ - justboom-dac.dtbo \ - justboom-digi.dtbo \ -- lirc-rpi.dtbo \ - ltc294x.dtbo \ - mbed-dac.dtbo \ - mcp23017.dtbo \ ---- a/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts -+++ /dev/null -@@ -1,57 +0,0 @@ --// Definitions for lirc-rpi module --/dts-v1/; --/plugin/; -- --/ { -- compatible = "brcm,bcm2708"; -- -- fragment@0 { -- target-path = "/"; -- __overlay__ { -- lirc_rpi: lirc_rpi { -- compatible = "rpi,lirc-rpi"; -- pinctrl-names = "default"; -- pinctrl-0 = <&lirc_pins>; -- status = "okay"; -- -- // Override autodetection of IR receiver circuit -- // (0 = active high, 1 = active low, -1 = no override ) -- rpi,sense = <0xffffffff>; -- -- // Software carrier -- // (0 = off, 1 = on) -- rpi,softcarrier = <1>; -- -- // Invert output -- // (0 = off, 1 = on) -- rpi,invert = <0>; -- -- // Enable debugging messages -- // (0 = off, 1 = on) -- rpi,debug = <0>; -- }; -- }; -- }; -- -- fragment@1 { -- target = <&gpio>; -- __overlay__ { -- lirc_pins: lirc_pins { -- brcm,pins = <17 18>; -- brcm,function = <1 0>; // out in -- brcm,pull = <0 1>; // off down -- }; -- }; -- }; -- -- __overrides__ { -- gpio_out_pin = <&lirc_pins>,"brcm,pins:0"; -- gpio_in_pin = <&lirc_pins>,"brcm,pins:4"; -- gpio_in_pull = <&lirc_pins>,"brcm,pull:4"; -- -- sense = <&lirc_rpi>,"rpi,sense:0"; -- softcarrier = <&lirc_rpi>,"rpi,softcarrier:0"; -- invert = <&lirc_rpi>,"rpi,invert:0"; -- debug = <&lirc_rpi>,"rpi,debug:0"; -- }; --}; diff --git a/target/linux/brcm2708/patches-4.19/950-0224-staging-bcm2835-camera-Fix-comment-style-violations.patch b/target/linux/brcm2708/patches-4.19/950-0224-staging-bcm2835-camera-Fix-comment-style-violations.patch new file mode 100644 index 0000000000..4788eebc68 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0224-staging-bcm2835-camera-Fix-comment-style-violations.patch @@ -0,0 +1,617 @@ +From 4fb0df1b29feafacc244ca512b152dd3b96c224c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 21 Feb 2018 13:49:32 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix comment style + violations. + +Fix comment style violations in the header files. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/mmal-msg-format.h | 95 ++++++------ + .../bcm2835-camera/mmal-msg-port.h | 124 ++++++++-------- + .../vc04_services/bcm2835-camera/mmal-msg.h | 135 +++++++++--------- + 3 files changed, 185 insertions(+), 169 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h +@@ -19,22 +19,23 @@ + /* MMAL_ES_FORMAT_T */ + + struct mmal_audio_format { +- u32 channels; /**< Number of audio channels */ +- u32 sample_rate; /**< Sample rate */ ++ u32 channels; /* Number of audio channels */ ++ u32 sample_rate; /* Sample rate */ + +- u32 bits_per_sample; /**< Bits per sample */ +- u32 block_align; /**< Size of a block of data */ ++ u32 bits_per_sample; /* Bits per sample */ ++ u32 block_align; /* Size of a block of data */ + }; + + struct mmal_video_format { +- u32 width; /**< Width of frame in pixels */ +- u32 height; /**< Height of frame in rows of pixels */ +- struct mmal_rect crop; /**< Visible region of the frame */ +- struct mmal_rational frame_rate; /**< Frame rate */ +- struct mmal_rational par; /**< Pixel aspect ratio */ +- +- /* FourCC specifying the color space of the video stream. See the +- * \ref MmalColorSpace "pre-defined color spaces" for some examples. ++ u32 width; /* Width of frame in pixels */ ++ u32 height; /* Height of frame in rows of pixels */ ++ struct mmal_rect crop; /* Visible region of the frame */ ++ struct mmal_rational frame_rate; /* Frame rate */ ++ struct mmal_rational par; /* Pixel aspect ratio */ ++ ++ /* ++ * FourCC specifying the color space of the video stream. See the ++ * MmalColorSpace "pre-defined color spaces" for some examples. + */ + u32 color_space; + }; +@@ -50,48 +51,56 @@ union mmal_es_specific_format { + struct mmal_subpicture_format subpicture; + }; + +-/** Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ ++/* Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ + struct mmal_es_format_local { +- u32 type; /* enum mmal_es_type */ +- +- u32 encoding; /* FourCC specifying encoding of the elementary stream.*/ +- u32 encoding_variant; /* FourCC specifying the specific +- * encoding variant of the elementary +- * stream. +- */ +- +- union mmal_es_specific_format *es; /* Type specific +- * information for the +- * elementary stream +- */ ++ u32 type; /* enum mmal_es_type */ + +- u32 bitrate; /**< Bitrate in bits per second */ +- u32 flags; /**< Flags describing properties of the elementary stream. */ ++ u32 encoding; /* FourCC specifying encoding of the elementary ++ * stream. ++ */ ++ u32 encoding_variant; /* FourCC specifying the specific ++ * encoding variant of the elementary ++ * stream. ++ */ ++ ++ union mmal_es_specific_format *es; /* Type specific ++ * information for the ++ * elementary stream ++ */ ++ ++ u32 bitrate; /* Bitrate in bits per second */ ++ u32 flags; /* Flags describing properties of the elementary ++ * stream. ++ */ + +- u32 extradata_size; /**< Size of the codec specific data */ +- u8 *extradata; /**< Codec specific data */ ++ u32 extradata_size; /* Size of the codec specific data */ ++ u8 *extradata; /* Codec specific data */ + }; + +-/** Remote definition of an elementary stream format (MMAL_ES_FORMAT_T) */ ++/* Remote definition of an elementary stream format (MMAL_ES_FORMAT_T) */ + struct mmal_es_format { +- u32 type; /* enum mmal_es_type */ ++ u32 type; /* enum mmal_es_type */ + +- u32 encoding; /* FourCC specifying encoding of the elementary stream.*/ +- u32 encoding_variant; /* FourCC specifying the specific +- * encoding variant of the elementary +- * stream. +- */ ++ u32 encoding; /* FourCC specifying encoding of the elementary ++ * stream. ++ */ ++ u32 encoding_variant; /* FourCC specifying the specific ++ * encoding variant of the elementary ++ * stream. ++ */ + +- u32 es; /* Type specific ++ u32 es; /* Type specific + * information for the + * elementary stream + */ + +- u32 bitrate; /**< Bitrate in bits per second */ +- u32 flags; /**< Flags describing properties of the elementary stream. */ ++ u32 bitrate; /* Bitrate in bits per second */ ++ u32 flags; /* Flags describing properties of the elementary ++ * stream. ++ */ + +- u32 extradata_size; /**< Size of the codec specific data */ +- u32 extradata; /**< Codec specific data */ ++ u32 extradata_size; /* Size of the codec specific data */ ++ u32 extradata; /* Codec specific data */ + }; + + #endif /* MMAL_MSG_FORMAT_H */ +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h +@@ -13,28 +13,31 @@ + + /* MMAL_PORT_TYPE_T */ + enum mmal_port_type { +- MMAL_PORT_TYPE_UNKNOWN = 0, /**< Unknown port type */ +- MMAL_PORT_TYPE_CONTROL, /**< Control port */ +- MMAL_PORT_TYPE_INPUT, /**< Input port */ +- MMAL_PORT_TYPE_OUTPUT, /**< Output port */ +- MMAL_PORT_TYPE_CLOCK, /**< Clock port */ ++ MMAL_PORT_TYPE_UNKNOWN = 0, /* Unknown port type */ ++ MMAL_PORT_TYPE_CONTROL, /* Control port */ ++ MMAL_PORT_TYPE_INPUT, /* Input port */ ++ MMAL_PORT_TYPE_OUTPUT, /* Output port */ ++ MMAL_PORT_TYPE_CLOCK, /* Clock port */ + }; + +-/** The port is pass-through and doesn't need buffer headers allocated */ ++/* The port is pass-through and doesn't need buffer headers allocated */ + #define MMAL_PORT_CAPABILITY_PASSTHROUGH 0x01 +-/** The port wants to allocate the buffer payloads. ++/* ++ *The port wants to allocate the buffer payloads. + * This signals a preference that payload allocation should be done + * on this port for efficiency reasons. + */ + #define MMAL_PORT_CAPABILITY_ALLOCATION 0x02 +-/** The port supports format change events. ++/* ++ * The port supports format change events. + * This applies to input ports and is used to let the client know + * whether the port supports being reconfigured via a format + * change event (i.e. without having to disable the port). + */ + #define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE 0x04 + +-/* mmal port structure (MMAL_PORT_T) ++/* ++ * mmal port structure (MMAL_PORT_T) + * + * most elements are informational only, the pointer values for + * interogation messages are generally provided as additional +@@ -42,50 +45,50 @@ enum mmal_port_type { + * buffer_num, buffer_size and userdata parameters are writable. + */ + struct mmal_port { +- u32 priv; /* Private member used by the framework */ +- u32 name; /* Port name. Used for debugging purposes (RO) */ ++ u32 priv; /* Private member used by the framework */ ++ u32 name; /* Port name. Used for debugging purposes (RO) */ + +- u32 type; /* Type of the port (RO) enum mmal_port_type */ +- u16 index; /* Index of the port in its type list (RO) */ +- u16 index_all; /* Index of the port in the list of all ports (RO) */ +- +- u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ +- u32 format; /* Format of the elementary stream */ +- +- u32 buffer_num_min; /* Minimum number of buffers the port +- * requires (RO). This is set by the +- * component. +- */ +- +- u32 buffer_size_min; /* Minimum size of buffers the port +- * requires (RO). This is set by the +- * component. +- */ +- +- u32 buffer_alignment_min; /* Minimum alignment requirement for +- * the buffers (RO). A value of +- * zero means no special alignment +- * requirements. This is set by the +- * component. +- */ +- +- u32 buffer_num_recommended; /* Number of buffers the port +- * recommends for optimal +- * performance (RO). A value of +- * zero means no special +- * recommendation. This is set +- * by the component. +- */ +- +- u32 buffer_size_recommended; /* Size of buffers the port +- * recommends for optimal +- * performance (RO). A value of +- * zero means no special +- * recommendation. This is set +- * by the component. +- */ ++ u32 type; /* Type of the port (RO) enum mmal_port_type */ ++ u16 index; /* Index of the port in its type list (RO) */ ++ u16 index_all; /* Index of the port in the list of all ports (RO) */ ++ ++ u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ ++ u32 format; /* Format of the elementary stream */ ++ ++ u32 buffer_num_min; /* Minimum number of buffers the port ++ * requires (RO). This is set by the ++ * component. ++ */ ++ ++ u32 buffer_size_min; /* Minimum size of buffers the port ++ * requires (RO). This is set by the ++ * component. ++ */ ++ ++ u32 buffer_alignment_min;/* Minimum alignment requirement for ++ * the buffers (RO). A value of ++ * zero means no special alignment ++ * requirements. This is set by the ++ * component. ++ */ ++ ++ u32 buffer_num_recommended; /* Number of buffers the port ++ * recommends for optimal ++ * performance (RO). A value of ++ * zero means no special ++ * recommendation. This is set ++ * by the component. ++ */ ++ ++ u32 buffer_size_recommended; /* Size of buffers the port ++ * recommends for optimal ++ * performance (RO). A value of ++ * zero means no special ++ * recommendation. This is set ++ * by the component. ++ */ + +- u32 buffer_num; /* Actual number of buffers the port will use. ++ u32 buffer_num; /* Actual number of buffers the port will use. + * This is set by the client. + */ + +@@ -94,14 +97,13 @@ struct mmal_port { + * the client. + */ + +- u32 component; /* Component this port belongs to (Read Only) */ ++ u32 component; /* Component this port belongs to (Read Only) */ + +- u32 userdata; /* Field reserved for use by the client */ +- +- u32 capabilities; /* Flags describing the capabilities of a +- * port (RO). Bitwise combination of \ref +- * portcapabilities "Port capabilities" +- * values. +- */ ++ u32 userdata; /* Field reserved for use by the client */ + ++ u32 capabilities; /* Flags describing the capabilities of a ++ * port (RO). Bitwise combination of \ref ++ * portcapabilities "Port capabilities" ++ * values. ++ */ + }; +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h +@@ -11,7 +11,8 @@ + * Luke Diamand @ Broadcom + */ + +-/* all the data structures which serialise the MMAL protocol. note ++/* ++ * all the data structures which serialise the MMAL protocol. note + * these are directly mapped onto the recived message data. + * + * BEWARE: They seem to *assume* pointers are u32 and that there is no +@@ -41,51 +42,51 @@ enum mmal_msg_type { + MMAL_MSG_TYPE_SERVICE_CLOSED, + MMAL_MSG_TYPE_GET_VERSION, + MMAL_MSG_TYPE_COMPONENT_CREATE, +- MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ ++ MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ + MMAL_MSG_TYPE_COMPONENT_ENABLE, + MMAL_MSG_TYPE_COMPONENT_DISABLE, + MMAL_MSG_TYPE_PORT_INFO_GET, + MMAL_MSG_TYPE_PORT_INFO_SET, +- MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ ++ MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ + MMAL_MSG_TYPE_BUFFER_FROM_HOST, + MMAL_MSG_TYPE_BUFFER_TO_HOST, + MMAL_MSG_TYPE_GET_STATS, + MMAL_MSG_TYPE_PORT_PARAMETER_SET, +- MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ ++ MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ + MMAL_MSG_TYPE_EVENT_TO_HOST, + MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT, + MMAL_MSG_TYPE_OPAQUE_ALLOCATOR, + MMAL_MSG_TYPE_CONSUME_MEM, +- MMAL_MSG_TYPE_LMK, /* 20 */ ++ MMAL_MSG_TYPE_LMK, /* 20 */ + MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC, + MMAL_MSG_TYPE_DRM_GET_LHS32, + MMAL_MSG_TYPE_DRM_GET_TIME, + MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN, +- MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ ++ MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ + MMAL_MSG_TYPE_HOST_LOG, + MMAL_MSG_TYPE_MSG_LAST + }; + + /* port action request messages differ depending on the action type */ + enum mmal_msg_port_action_type { +- MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unknown action */ +- MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ +- MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ +- MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ +- MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ +- MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ ++ MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unknown action */ ++ MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ ++ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ + MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/ + }; + + struct mmal_msg_header { + u32 magic; +- u32 type; /** enum mmal_msg_type */ ++ u32 type; /* enum mmal_msg_type */ + + /* Opaque handle to the control service */ + u32 control_service; + +- u32 context; /** a u32 per message context */ +- u32 status; /** The status of the vchiq operation */ ++ u32 context; /* a u32 per message context */ ++ u32 status; /* The status of the vchiq operation */ + u32 padding; + }; + +@@ -99,9 +100,9 @@ struct mmal_msg_version { + + /* request to VC to create component */ + struct mmal_msg_component_create { +- u32 client_component; /* component context */ ++ u32 client_component; /* component context */ + char name[128]; +- u32 pid; /* For debug */ ++ u32 pid; /* For debug */ + }; + + /* reply from VC to component creation request */ +@@ -121,7 +122,7 @@ struct mmal_msg_component_destroy { + }; + + struct mmal_msg_component_destroy_reply { +- u32 status; /** The component destruction status */ ++ u32 status; /* The component destruction status */ + }; + + /* request and reply to VC to enable a component */ +@@ -130,7 +131,7 @@ struct mmal_msg_component_enable { + }; + + struct mmal_msg_component_enable_reply { +- u32 status; /** The component enable status */ ++ u32 status; /* The component enable status */ + }; + + /* request and reply to VC to disable a component */ +@@ -139,7 +140,7 @@ struct mmal_msg_component_disable { + }; + + struct mmal_msg_component_disable_reply { +- u32 status; /** The component disable status */ ++ u32 status; /* The component disable status */ + }; + + /* request to VC to get port information */ +@@ -151,12 +152,12 @@ struct mmal_msg_port_info_get { + + /* reply from VC to get port info request */ + struct mmal_msg_port_info_get_reply { +- u32 status; /** enum mmal_msg_status */ +- u32 component_handle; /* component handle port is associated with */ +- u32 port_type; /* enum mmal_msg_port_type */ +- u32 port_index; /* port indexed in query */ +- s32 found; /* unused */ +- u32 port_handle; /**< Handle to use for this port */ ++ u32 status; /* enum mmal_msg_status */ ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 port_index; /* port indexed in query */ ++ s32 found; /* unused */ ++ u32 port_handle; /* Handle to use for this port */ + struct mmal_port port; + struct mmal_es_format format; /* elementary stream format */ + union mmal_es_specific_format es; /* es type specific data */ +@@ -166,8 +167,8 @@ struct mmal_msg_port_info_get_reply { + /* request to VC to set port information */ + struct mmal_msg_port_info_set { + u32 component_handle; +- u32 port_type; /* enum mmal_msg_port_type */ +- u32 port_index; /* port indexed in query */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 port_index; /* port indexed in query */ + struct mmal_port port; + struct mmal_es_format format; + union mmal_es_specific_format es; +@@ -177,11 +178,11 @@ struct mmal_msg_port_info_set { + /* reply from VC to port info set request */ + struct mmal_msg_port_info_set_reply { + u32 status; +- u32 component_handle; /* component handle port is associated with */ +- u32 port_type; /* enum mmal_msg_port_type */ +- u32 index; /* port indexed in query */ +- s32 found; /* unused */ +- u32 port_handle; /**< Handle to use for this port */ ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 index; /* port indexed in query */ ++ s32 found; /* unused */ ++ u32 port_handle; /* Handle to use for this port */ + struct mmal_port port; + struct mmal_es_format format; + union mmal_es_specific_format es; +@@ -192,7 +193,7 @@ struct mmal_msg_port_info_set_reply { + struct mmal_msg_port_action_port { + u32 component_handle; + u32 port_handle; +- u32 action; /* enum mmal_msg_port_action_type */ ++ u32 action; /* enum mmal_msg_port_action_type */ + struct mmal_port port; + }; + +@@ -200,50 +201,53 @@ struct mmal_msg_port_action_port { + struct mmal_msg_port_action_handle { + u32 component_handle; + u32 port_handle; +- u32 action; /* enum mmal_msg_port_action_type */ ++ u32 action; /* enum mmal_msg_port_action_type */ + u32 connect_component_handle; + u32 connect_port_handle; + }; + + struct mmal_msg_port_action_reply { +- u32 status; /** The port action operation status */ ++ u32 status; /* The port action operation status */ + }; + + /* MMAL buffer transfer */ + +-/** Size of space reserved in a buffer message for short messages. */ ++/* Size of space reserved in a buffer message for short messages. */ + #define MMAL_VC_SHORT_DATA 128 + +-/** Signals that the current payload is the end of the stream of data */ ++/* Signals that the current payload is the end of the stream of data */ + #define MMAL_BUFFER_HEADER_FLAG_EOS BIT(0) +-/** Signals that the start of the current payload starts a frame */ ++/* Signals that the start of the current payload starts a frame */ + #define MMAL_BUFFER_HEADER_FLAG_FRAME_START BIT(1) +-/** Signals that the end of the current payload ends a frame */ ++/* Signals that the end of the current payload ends a frame */ + #define MMAL_BUFFER_HEADER_FLAG_FRAME_END BIT(2) +-/** Signals that the current payload contains only complete frames (>1) */ ++/* Signals that the current payload contains only complete frames (>1) */ + #define MMAL_BUFFER_HEADER_FLAG_FRAME \ + (MMAL_BUFFER_HEADER_FLAG_FRAME_START|MMAL_BUFFER_HEADER_FLAG_FRAME_END) +-/** Signals that the current payload is a keyframe (i.e. self decodable) */ ++/* Signals that the current payload is a keyframe (i.e. self decodable) */ + #define MMAL_BUFFER_HEADER_FLAG_KEYFRAME BIT(3) +-/** Signals a discontinuity in the stream of data (e.g. after a seek). ++/* ++ * Signals a discontinuity in the stream of data (e.g. after a seek). + * Can be used for instance by a decoder to reset its state + */ + #define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY BIT(4) +-/** Signals a buffer containing some kind of config data for the component ++/* ++ * Signals a buffer containing some kind of config data for the component + * (e.g. codec config data) + */ + #define MMAL_BUFFER_HEADER_FLAG_CONFIG BIT(5) +-/** Signals an encrypted payload */ ++/* Signals an encrypted payload */ + #define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED BIT(6) +-/** Signals a buffer containing side information */ ++/* Signals a buffer containing side information */ + #define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO BIT(7) +-/** Signals a buffer which is the snapshot/postview image from a stills ++/* ++ * Signals a buffer which is the snapshot/postview image from a stills + * capture + */ + #define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT BIT(8) +-/** Signals a buffer which contains data known to be corrupted */ ++/* Signals a buffer which contains data known to be corrupted */ + #define MMAL_BUFFER_HEADER_FLAG_CORRUPTED BIT(9) +-/** Signals that a buffer failed to be transmitted */ ++/* Signals that a buffer failed to be transmitted */ + #define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED BIT(10) + + struct mmal_driver_buffer { +@@ -255,8 +259,8 @@ struct mmal_driver_buffer { + + /* buffer header */ + struct mmal_buffer_header { +- u32 next; /* next header */ +- u32 priv; /* framework private data */ ++ u32 next; /* next header */ ++ u32 priv; /* framework private data */ + u32 cmd; + u32 data; + u32 alloc_size; +@@ -281,7 +285,8 @@ struct mmal_buffer_header_type_specific + }; + + struct mmal_msg_buffer_from_host { +- /* The front 32 bytes of the buffer header are copied ++ /* ++ *The front 32 bytes of the buffer header are copied + * back to us in the reply to allow for context. This + * area is used to store two mmal_driver_buffer structures to + * allow for multiple concurrent service users. +@@ -296,7 +301,7 @@ struct mmal_msg_buffer_from_host { + s32 is_zero_copy; + s32 has_reference; + +- /** allows short data to be xfered in control message */ ++ /* allows short data to be xfered in control message */ + u32 payload_in_message; + u8 short_data[MMAL_VC_SHORT_DATA]; + }; +@@ -306,10 +311,10 @@ struct mmal_msg_buffer_from_host { + #define MMAL_WORKER_PORT_PARAMETER_SPACE 96 + + struct mmal_msg_port_parameter_set { +- u32 component_handle; /* component */ +- u32 port_handle; /* port */ +- u32 id; /* Parameter ID */ +- u32 size; /* Parameter size */ ++ u32 component_handle; /* component */ ++ u32 port_handle; /* port */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ + uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; + }; + +@@ -322,16 +327,16 @@ struct mmal_msg_port_parameter_set_reply + /* port parameter getting */ + + struct mmal_msg_port_parameter_get { +- u32 component_handle; /* component */ +- u32 port_handle; /* port */ +- u32 id; /* Parameter ID */ +- u32 size; /* Parameter size */ ++ u32 component_handle; /* component */ ++ u32 port_handle; /* port */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ + }; + + struct mmal_msg_port_parameter_get_reply { +- u32 status; /* Status of mmal_port_parameter_get call */ +- u32 id; /* Parameter ID */ +- u32 size; /* Parameter size */ ++ u32 status; /* Status of mmal_port_parameter_get call */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ + uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; + }; + +@@ -339,7 +344,7 @@ struct mmal_msg_port_parameter_get_reply + #define MMAL_WORKER_EVENT_SPACE 256 + + struct mmal_msg_event_to_host { +- u32 client_component; /* component context */ ++ u32 client_component; /* component context */ + + u32 port_type; + u32 port_num; diff --git a/target/linux/brcm2708/patches-4.19/950-0225-media-bcm2835-unicam-Pass-through-the-colorspace-on-.patch b/target/linux/brcm2708/patches-4.19/950-0225-media-bcm2835-unicam-Pass-through-the-colorspace-on-.patch deleted file mode 100644 index f5c9827151..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0225-media-bcm2835-unicam-Pass-through-the-colorspace-on-.patch +++ /dev/null @@ -1,30 +0,0 @@ -From f1ab5c7dc1328f0baad2a437a80c792f725c455f Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 22 Nov 2018 17:28:02 +0000 -Subject: [PATCH 225/806] media: bcm2835-unicam: Pass through the colorspace on - try_fmt - -The current colorspace was always returned from try_fmt for no -good reason. -Return what the source subdevice returns instead. - -Signed-off-by: Dave Stevenson ---- - drivers/media/platform/bcm2835/bcm2835-unicam.c | 6 +----- - 1 file changed, 1 insertion(+), 5 deletions(-) - ---- a/drivers/media/platform/bcm2835/bcm2835-unicam.c -+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c -@@ -761,11 +761,7 @@ static int unicam_try_fmt_vid_cap(struct - unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n"); - - v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format); -- /* -- * Use current colorspace for now, it will get -- * updated properly during s_fmt -- */ -- f->fmt.pix.colorspace = dev->v_fmt.fmt.pix.colorspace; -+ - return unicam_calc_format_size_bpl(dev, fmt, f); - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0225-staging-bcm2835-camera-Fix-spacing-around-operators.patch b/target/linux/brcm2708/patches-4.19/950-0225-staging-bcm2835-camera-Fix-spacing-around-operators.patch new file mode 100644 index 0000000000..38bcbbd2d9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0225-staging-bcm2835-camera-Fix-spacing-around-operators.patch @@ -0,0 +1,102 @@ +From 54fde7601287891754bef85efbbc9b5648d043f4 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 21 Feb 2018 14:13:03 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix spacing around operators + +Fix checkpatch warnings over spaces around operators. +Many were around operations that can be replaced with the +BIT(x) macro, so replace with that where appropriate. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-camera/controls.c | 32 +++++++++---------- + .../vc04_services/bcm2835-camera/mmal-msg.h | 3 +- + .../bcm2835-camera/mmal-parameters.h | 12 +++---- + 3 files changed, 24 insertions(+), 23 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -1123,10 +1123,10 @@ static const struct bm2835_mmal_v4l2_ctr + { + V4L2_CID_MPEG_VIDEO_H264_PROFILE, + MMAL_CONTROL_TYPE_STD_MENU, +- ~((1<1) */ + #define MMAL_BUFFER_HEADER_FLAG_FRAME \ +- (MMAL_BUFFER_HEADER_FLAG_FRAME_START|MMAL_BUFFER_HEADER_FLAG_FRAME_END) ++ (MMAL_BUFFER_HEADER_FLAG_FRAME_START | \ ++ MMAL_BUFFER_HEADER_FLAG_FRAME_END) + /* Signals that the current payload is a keyframe (i.e. self decodable) */ + #define MMAL_BUFFER_HEADER_FLAG_KEYFRAME BIT(3) + /* +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h +@@ -23,17 +23,17 @@ + #define __MMAL_PARAMETERS_H + + /** Common parameter ID group, used with many types of component. */ +-#define MMAL_PARAMETER_GROUP_COMMON (0<<16) ++#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) + /** Camera-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_CAMERA (1<<16) ++#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) + /** Video-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_VIDEO (2<<16) ++#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) + /** Audio-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_AUDIO (3<<16) ++#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) + /** Clock-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_CLOCK (4<<16) ++#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) + /** Miracast-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_MIRACAST (5<<16) ++#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) + + /* Common parameters */ + enum mmal_parameter_common_type { diff --git a/target/linux/brcm2708/patches-4.19/950-0226-media-tc358743-Return-an-appropriate-colorspace-from.patch b/target/linux/brcm2708/patches-4.19/950-0226-media-tc358743-Return-an-appropriate-colorspace-from.patch deleted file mode 100644 index f193d79f67..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0226-media-tc358743-Return-an-appropriate-colorspace-from.patch +++ /dev/null @@ -1,98 +0,0 @@ -From c7a3697a4d4c2199f05ab3cd321138d464ca62db Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 22 Nov 2018 17:31:06 +0000 -Subject: [PATCH 226/806] media: tc358743: Return an appropriate colorspace - from tc358743_set_fmt - -When calling tc358743_set_fmt, the code was calling tc358743_get_fmt -to choose a valid format. However that sets the colorspace -based on what was read back from the chip. When you set the format, -then the driver would choose and program the colorspace based -on the format code. - -The result was that if you called try or set format for UYVY -when the current format was RGB3 then you would get told sRGB, -and try RGB3 when current was UYVY and you would get told -SMPTE170M. - -The value programmed into the chip is determined by this driver, -therefore there is no need to read back the value. Return the -colorspace based on the format set/tried instead. - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/tc358743.c | 40 +++++++++++++----------------------- - 1 file changed, 14 insertions(+), 26 deletions(-) - ---- a/drivers/media/i2c/tc358743.c -+++ b/drivers/media/i2c/tc358743.c -@@ -1680,12 +1680,23 @@ static int tc358743_enum_mbus_code(struc - return 0; - } - -+static u32 tc358743_g_colorspace(u32 code) -+{ -+ switch (code) { -+ case MEDIA_BUS_FMT_RGB888_1X24: -+ return V4L2_COLORSPACE_SRGB; -+ case MEDIA_BUS_FMT_UYVY8_1X16: -+ return V4L2_COLORSPACE_SMPTE170M; -+ default: -+ return 0; -+ } -+} -+ - static int tc358743_get_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *format) - { - struct tc358743_state *state = to_state(sd); -- u8 vi_rep = i2c_rd8(sd, VI_REP); - - if (format->pad != 0) - return -EINVAL; -@@ -1695,23 +1706,7 @@ static int tc358743_get_fmt(struct v4l2_ - format->format.height = state->timings.bt.height; - format->format.field = V4L2_FIELD_NONE; - -- switch (vi_rep & MASK_VOUT_COLOR_SEL) { -- case MASK_VOUT_COLOR_RGB_FULL: -- case MASK_VOUT_COLOR_RGB_LIMITED: -- format->format.colorspace = V4L2_COLORSPACE_SRGB; -- break; -- case MASK_VOUT_COLOR_601_YCBCR_LIMITED: -- case MASK_VOUT_COLOR_601_YCBCR_FULL: -- format->format.colorspace = V4L2_COLORSPACE_SMPTE170M; -- break; -- case MASK_VOUT_COLOR_709_YCBCR_FULL: -- case MASK_VOUT_COLOR_709_YCBCR_LIMITED: -- format->format.colorspace = V4L2_COLORSPACE_REC709; -- break; -- default: -- format->format.colorspace = 0; -- break; -- } -+ format->format.colorspace = tc358743_g_colorspace(format->format.code); - - return 0; - } -@@ -1726,18 +1721,11 @@ static int tc358743_set_fmt(struct v4l2_ - int ret = tc358743_get_fmt(sd, cfg, format); - - format->format.code = code; -+ format->format.colorspace = tc358743_g_colorspace(code); - - if (ret) - return ret; - -- switch (code) { -- case MEDIA_BUS_FMT_RGB888_1X24: -- case MEDIA_BUS_FMT_UYVY8_1X16: -- break; -- default: -- return -EINVAL; -- } -- - if (format->which == V4L2_SUBDEV_FORMAT_TRY) - return 0; - diff --git a/target/linux/brcm2708/patches-4.19/950-0226-staging-bcm2835-camera-Reduce-length-of-enum-names.patch b/target/linux/brcm2708/patches-4.19/950-0226-staging-bcm2835-camera-Reduce-length-of-enum-names.patch new file mode 100644 index 0000000000..e6d5875341 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0226-staging-bcm2835-camera-Reduce-length-of-enum-names.patch @@ -0,0 +1,774 @@ +From 75aca02c1449e3a97ec32de9974ad410f5d34463 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 21 Feb 2018 15:23:35 +0000 +Subject: [PATCH] staging: bcm2835-camera: Reduce length of enum names + +We have numerous lines over 80 chars, or oddly split. Many +of these are due to using long enum names such as +MMAL_COMPONENT_CAMERA. +Reduce the length of these enum names. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/bcm2835-camera.c | 165 +++++++++--------- + .../bcm2835-camera/bcm2835-camera.h | 20 +-- + .../vc04_services/bcm2835-camera/controls.c | 47 +++-- + 3 files changed, 114 insertions(+), 118 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -80,7 +80,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_I420, + .depth = 12, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 1, + .remove_padding = 1, + }, { +@@ -89,7 +89,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_YUYV, + .depth = 16, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 2, + .remove_padding = 0, + }, { +@@ -98,7 +98,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_RGB24, + .depth = 24, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 3, + .remove_padding = 0, + }, { +@@ -107,7 +107,7 @@ static struct mmal_fmt formats[] = { + .flags = V4L2_FMT_FLAG_COMPRESSED, + .mmal = MMAL_ENCODING_JPEG, + .depth = 8, +- .mmal_component = MMAL_COMPONENT_IMAGE_ENCODE, ++ .mmal_component = COMP_IMAGE_ENCODE, + .ybbp = 0, + .remove_padding = 0, + }, { +@@ -116,7 +116,7 @@ static struct mmal_fmt formats[] = { + .flags = V4L2_FMT_FLAG_COMPRESSED, + .mmal = MMAL_ENCODING_H264, + .depth = 8, +- .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, ++ .mmal_component = COMP_VIDEO_ENCODE, + .ybbp = 0, + .remove_padding = 0, + }, { +@@ -125,7 +125,7 @@ static struct mmal_fmt formats[] = { + .flags = V4L2_FMT_FLAG_COMPRESSED, + .mmal = MMAL_ENCODING_MJPEG, + .depth = 8, +- .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, ++ .mmal_component = COMP_VIDEO_ENCODE, + .ybbp = 0, + .remove_padding = 0, + }, { +@@ -134,7 +134,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_YVYU, + .depth = 16, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 2, + .remove_padding = 0, + }, { +@@ -143,7 +143,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_VYUY, + .depth = 16, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 2, + .remove_padding = 0, + }, { +@@ -152,7 +152,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_UYVY, + .depth = 16, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 2, + .remove_padding = 0, + }, { +@@ -161,7 +161,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_NV12, + .depth = 12, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 1, + .remove_padding = 1, + }, { +@@ -170,7 +170,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_BGR24, + .depth = 24, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 3, + .remove_padding = 0, + }, { +@@ -179,7 +179,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_YV12, + .depth = 12, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 1, + .remove_padding = 1, + }, { +@@ -188,7 +188,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_NV21, + .depth = 12, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 1, + .remove_padding = 1, + }, { +@@ -197,7 +197,7 @@ static struct mmal_fmt formats[] = { + .flags = 0, + .mmal = MMAL_ENCODING_BGRA, + .depth = 32, +- .mmal_component = MMAL_COMPONENT_CAMERA, ++ .mmal_component = COMP_CAMERA, + .ybbp = 4, + .remove_padding = 0, + }, +@@ -314,7 +314,7 @@ static inline bool is_capturing(struct b + { + return dev->capture.camera_port == + &dev-> +- component[MMAL_COMPONENT_CAMERA]->output[MMAL_CAMERA_PORT_CAPTURE]; ++ component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; + } + + static void buffer_cb(struct vchiq_mmal_instance *instance, +@@ -439,7 +439,7 @@ static int enable_camera(struct bm2835_m + if (!dev->camera_use_count) { + ret = vchiq_mmal_port_parameter_set( + dev->instance, +- &dev->component[MMAL_COMPONENT_CAMERA]->control, ++ &dev->component[COMP_CAMERA]->control, + MMAL_PARAMETER_CAMERA_NUM, &dev->camera_num, + sizeof(dev->camera_num)); + if (ret < 0) { +@@ -450,7 +450,7 @@ static int enable_camera(struct bm2835_m + + ret = vchiq_mmal_component_enable( + dev->instance, +- dev->component[MMAL_COMPONENT_CAMERA]); ++ dev->component[COMP_CAMERA]); + if (ret < 0) { + v4l2_err(&dev->v4l2_dev, + "Failed enabling camera, ret %d\n", ret); +@@ -482,7 +482,7 @@ static int disable_camera(struct bm2835_ + ret = + vchiq_mmal_component_disable( + dev->instance, +- dev->component[MMAL_COMPONENT_CAMERA]); ++ dev->component[COMP_CAMERA]); + if (ret < 0) { + v4l2_err(&dev->v4l2_dev, + "Failed disabling camera, ret %d\n", ret); +@@ -490,7 +490,7 @@ static int disable_camera(struct bm2835_ + } + vchiq_mmal_port_parameter_set( + dev->instance, +- &dev->component[MMAL_COMPONENT_CAMERA]->control, ++ &dev->component[COMP_CAMERA]->control, + MMAL_PARAMETER_CAMERA_NUM, &i, + sizeof(i)); + } +@@ -542,7 +542,7 @@ static int start_streaming(struct vb2_qu + /* if the preview is not already running, wait for a few frames for AGC + * to settle down. + */ +- if (!dev->component[MMAL_COMPONENT_PREVIEW]->enabled) ++ if (!dev->component[COMP_PREVIEW]->enabled) + msleep(300); + + /* enable the connection from camera to encoder (if applicable) */ +@@ -775,9 +775,9 @@ static int vidioc_s_fmt_vid_overlay(stru + vidioc_try_fmt_vid_overlay(file, priv, f); + + dev->overlay = f->fmt.win; +- if (dev->component[MMAL_COMPONENT_PREVIEW]->enabled) { ++ if (dev->component[COMP_PREVIEW]->enabled) { + set_overlay_params(dev, +- &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); ++ &dev->component[COMP_PREVIEW]->input[0]); + } + + return 0; +@@ -790,13 +790,13 @@ static int vidioc_overlay(struct file *f + struct vchiq_mmal_port *src; + struct vchiq_mmal_port *dst; + +- if ((on && dev->component[MMAL_COMPONENT_PREVIEW]->enabled) || +- (!on && !dev->component[MMAL_COMPONENT_PREVIEW]->enabled)) ++ if ((on && dev->component[COMP_PREVIEW]->enabled) || ++ (!on && !dev->component[COMP_PREVIEW]->enabled)) + return 0; /* already in requested state */ + + src = +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_PREVIEW]; ++ &dev->component[COMP_CAMERA]-> ++ output[CAM_PORT_PREVIEW]; + + if (!on) { + /* disconnect preview ports and disable component */ +@@ -808,14 +808,14 @@ static int vidioc_overlay(struct file *f + if (ret >= 0) + ret = vchiq_mmal_component_disable( + dev->instance, +- dev->component[MMAL_COMPONENT_PREVIEW]); ++ dev->component[COMP_PREVIEW]); + + disable_camera(dev); + return ret; + } + + /* set preview port format and connect it to output */ +- dst = &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]; ++ dst = &dev->component[COMP_PREVIEW]->input[0]; + + ret = vchiq_mmal_port_set_format(dev->instance, src); + if (ret < 0) +@@ -832,7 +832,7 @@ static int vidioc_overlay(struct file *f + + ret = vchiq_mmal_component_enable( + dev->instance, +- dev->component[MMAL_COMPONENT_PREVIEW]); ++ dev->component[COMP_PREVIEW]); + if (ret < 0) + return ret; + +@@ -853,8 +853,8 @@ static int vidioc_g_fbuf(struct file *fi + */ + struct bm2835_mmal_dev *dev = video_drvdata(file); + struct vchiq_mmal_port *preview_port = +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_PREVIEW]; ++ &dev->component[COMP_CAMERA]-> ++ output[CAM_PORT_PREVIEW]; + + a->capability = V4L2_FBUF_CAP_EXTERNOVERLAY | + V4L2_FBUF_CAP_GLOBAL_ALPHA; +@@ -1057,31 +1057,31 @@ static int mmal_setup_components(struct + } + /* format dependent port setup */ + switch (mfmt->mmal_component) { +- case MMAL_COMPONENT_CAMERA: ++ case COMP_CAMERA: + /* Make a further decision on port based on resolution */ + if (f->fmt.pix.width <= max_video_width + && f->fmt.pix.height <= max_video_height) + camera_port = port = +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_VIDEO]; ++ &dev->component[COMP_CAMERA]-> ++ output[CAM_PORT_VIDEO]; + else + camera_port = port = +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_CAPTURE]; ++ &dev->component[COMP_CAMERA]-> ++ output[CAM_PORT_CAPTURE]; + break; +- case MMAL_COMPONENT_IMAGE_ENCODE: +- encode_component = dev->component[MMAL_COMPONENT_IMAGE_ENCODE]; +- port = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; ++ case COMP_IMAGE_ENCODE: ++ encode_component = dev->component[COMP_IMAGE_ENCODE]; ++ port = &dev->component[COMP_IMAGE_ENCODE]->output[0]; + camera_port = +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_CAPTURE]; ++ &dev->component[COMP_CAMERA]-> ++ output[CAM_PORT_CAPTURE]; + break; +- case MMAL_COMPONENT_VIDEO_ENCODE: +- encode_component = dev->component[MMAL_COMPONENT_VIDEO_ENCODE]; +- port = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ case COMP_VIDEO_ENCODE: ++ encode_component = dev->component[COMP_VIDEO_ENCODE]; ++ port = &dev->component[COMP_VIDEO_ENCODE]->output[0]; + camera_port = +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_VIDEO]; ++ &dev->component[COMP_CAMERA]-> ++ output[CAM_PORT_VIDEO]; + break; + default: + break; +@@ -1123,13 +1123,12 @@ static int mmal_setup_components(struct + + if (!ret + && camera_port == +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_VIDEO]) { ++ &dev->component[COMP_CAMERA]-> ++ output[CAM_PORT_VIDEO]) { + bool overlay_enabled = +- !!dev->component[MMAL_COMPONENT_PREVIEW]->enabled; ++ !!dev->component[COMP_PREVIEW]->enabled; + struct vchiq_mmal_port *preview_port = +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_PREVIEW]; ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW]; + /* Preview and encode ports need to match on resolution */ + if (overlay_enabled) { + /* Need to disable the overlay before we can update +@@ -1160,7 +1159,7 @@ static int mmal_setup_components(struct + ret = vchiq_mmal_port_connect_tunnel( + dev->instance, + preview_port, +- &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); ++ &dev->component[COMP_PREVIEW]->input[0]); + if (!ret) + ret = vchiq_mmal_port_enable(dev->instance, + preview_port, +@@ -1214,11 +1213,11 @@ static int mmal_setup_components(struct + port->format.encoding_variant = 0; + /* Set any encoding specific parameters */ + switch (mfmt->mmal_component) { +- case MMAL_COMPONENT_VIDEO_ENCODE: ++ case COMP_VIDEO_ENCODE: + port->format.bitrate = + dev->capture.encode_bitrate; + break; +- case MMAL_COMPONENT_IMAGE_ENCODE: ++ case COMP_IMAGE_ENCODE: + /* Could set EXIF parameters here */ + break; + default: +@@ -1593,14 +1592,14 @@ static int mmal_init(struct bm2835_mmal_ + + /* get the camera component ready */ + ret = vchiq_mmal_component_init(dev->instance, "ril.camera", +- &dev->component[MMAL_COMPONENT_CAMERA]); ++ &dev->component[COMP_CAMERA]); + if (ret < 0) + goto unreg_mmal; + +- camera = dev->component[MMAL_COMPONENT_CAMERA]; +- if (camera->outputs < MMAL_CAMERA_PORT_COUNT) { ++ camera = dev->component[COMP_CAMERA]; ++ if (camera->outputs < CAM_PORT_COUNT) { + v4l2_err(&dev->v4l2_dev, "%s: too few camera outputs %d needed %d\n", +- __func__, camera->outputs, MMAL_CAMERA_PORT_COUNT); ++ __func__, camera->outputs, CAM_PORT_COUNT); + ret = -EINVAL; + goto unreg_camera; + } +@@ -1622,7 +1621,7 @@ static int mmal_init(struct bm2835_mmal_ + dev->rgb_bgr_swapped = true; + param_size = sizeof(supported_encodings); + ret = vchiq_mmal_port_parameter_get(dev->instance, +- &camera->output[MMAL_CAMERA_PORT_CAPTURE], ++ &camera->output[CAM_PORT_CAPTURE], + MMAL_PARAMETER_SUPPORTED_ENCODINGS, + &supported_encodings, + ¶m_size); +@@ -1643,7 +1642,7 @@ static int mmal_init(struct bm2835_mmal_ + } + } + } +- format = &camera->output[MMAL_CAMERA_PORT_PREVIEW].format; ++ format = &camera->output[CAM_PORT_PREVIEW].format; + + format->encoding = MMAL_ENCODING_OPAQUE; + format->encoding_variant = MMAL_ENCODING_I420; +@@ -1657,7 +1656,7 @@ static int mmal_init(struct bm2835_mmal_ + format->es->video.frame_rate.num = 0; /* Rely on fps_range */ + format->es->video.frame_rate.den = 1; + +- format = &camera->output[MMAL_CAMERA_PORT_VIDEO].format; ++ format = &camera->output[CAM_PORT_VIDEO].format; + + format->encoding = MMAL_ENCODING_OPAQUE; + format->encoding_variant = MMAL_ENCODING_I420; +@@ -1671,7 +1670,7 @@ static int mmal_init(struct bm2835_mmal_ + format->es->video.frame_rate.num = 0; /* Rely on fps_range */ + format->es->video.frame_rate.den = 1; + +- format = &camera->output[MMAL_CAMERA_PORT_CAPTURE].format; ++ format = &camera->output[CAM_PORT_CAPTURE].format; + + format->encoding = MMAL_ENCODING_OPAQUE; + +@@ -1695,28 +1694,28 @@ static int mmal_init(struct bm2835_mmal_ + /* get the preview component ready */ + ret = vchiq_mmal_component_init( + dev->instance, "ril.video_render", +- &dev->component[MMAL_COMPONENT_PREVIEW]); ++ &dev->component[COMP_PREVIEW]); + if (ret < 0) + goto unreg_camera; + +- if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) { ++ if (dev->component[COMP_PREVIEW]->inputs < 1) { + ret = -EINVAL; + v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", +- __func__, dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1); ++ __func__, dev->component[COMP_PREVIEW]->inputs, 1); + goto unreg_preview; + } + + /* get the image encoder component ready */ + ret = vchiq_mmal_component_init( + dev->instance, "ril.image_encode", +- &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); ++ &dev->component[COMP_IMAGE_ENCODE]); + if (ret < 0) + goto unreg_preview; + +- if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) { ++ if (dev->component[COMP_IMAGE_ENCODE]->inputs < 1) { + ret = -EINVAL; + v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", +- __func__, dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs, ++ __func__, dev->component[COMP_IMAGE_ENCODE]->inputs, + 1); + goto unreg_image_encoder; + } +@@ -1724,21 +1723,21 @@ static int mmal_init(struct bm2835_mmal_ + /* get the video encoder component ready */ + ret = vchiq_mmal_component_init(dev->instance, "ril.video_encode", + &dev-> +- component[MMAL_COMPONENT_VIDEO_ENCODE]); ++ component[COMP_VIDEO_ENCODE]); + if (ret < 0) + goto unreg_image_encoder; + +- if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) { ++ if (dev->component[COMP_VIDEO_ENCODE]->inputs < 1) { + ret = -EINVAL; + v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", +- __func__, dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs, ++ __func__, dev->component[COMP_VIDEO_ENCODE]->inputs, + 1); + goto unreg_vid_encoder; + } + + { + struct vchiq_mmal_port *encoder_port = +- &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ &dev->component[COMP_VIDEO_ENCODE]->output[0]; + encoder_port->format.encoding = MMAL_ENCODING_H264; + ret = vchiq_mmal_port_set_format(dev->instance, + encoder_port); +@@ -1749,12 +1748,12 @@ static int mmal_init(struct bm2835_mmal_ + + vchiq_mmal_port_parameter_set( + dev->instance, +- &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, ++ &dev->component[COMP_VIDEO_ENCODE]->control, + MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, + &enable, sizeof(enable)); + + vchiq_mmal_port_parameter_set(dev->instance, +- &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, ++ &dev->component[COMP_VIDEO_ENCODE]->control, + MMAL_PARAMETER_MINIMISE_FRAGMENTATION, + &enable, + sizeof(enable)); +@@ -1772,23 +1771,23 @@ unreg_vid_encoder: + pr_err("Cleanup: Destroy video encoder\n"); + vchiq_mmal_component_finalise( + dev->instance, +- dev->component[MMAL_COMPONENT_VIDEO_ENCODE]); ++ dev->component[COMP_VIDEO_ENCODE]); + + unreg_image_encoder: + pr_err("Cleanup: Destroy image encoder\n"); + vchiq_mmal_component_finalise( + dev->instance, +- dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); ++ dev->component[COMP_IMAGE_ENCODE]); + + unreg_preview: + pr_err("Cleanup: Destroy video render\n"); + vchiq_mmal_component_finalise(dev->instance, +- dev->component[MMAL_COMPONENT_PREVIEW]); ++ dev->component[COMP_PREVIEW]); + + unreg_camera: + pr_err("Cleanup: Destroy camera\n"); + vchiq_mmal_component_finalise(dev->instance, +- dev->component[MMAL_COMPONENT_CAMERA]); ++ dev->component[COMP_CAMERA]); + + unreg_mmal: + vchiq_mmal_finalise(dev->instance); +@@ -1844,21 +1843,21 @@ static void bcm2835_cleanup_instance(str + dev->capture.encode_component); + } + vchiq_mmal_component_disable(dev->instance, +- dev->component[MMAL_COMPONENT_CAMERA]); ++ dev->component[COMP_CAMERA]); + + vchiq_mmal_component_finalise(dev->instance, + dev-> +- component[MMAL_COMPONENT_VIDEO_ENCODE]); ++ component[COMP_VIDEO_ENCODE]); + + vchiq_mmal_component_finalise(dev->instance, + dev-> +- component[MMAL_COMPONENT_IMAGE_ENCODE]); ++ component[COMP_IMAGE_ENCODE]); + + vchiq_mmal_component_finalise(dev->instance, +- dev->component[MMAL_COMPONENT_PREVIEW]); ++ dev->component[COMP_PREVIEW]); + + vchiq_mmal_component_finalise(dev->instance, +- dev->component[MMAL_COMPONENT_CAMERA]); ++ dev->component[COMP_CAMERA]); + + v4l2_ctrl_handler_free(&dev->ctrl_handler); + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h +@@ -16,18 +16,18 @@ + #define V4L2_CTRL_COUNT 29 /* number of v4l controls */ + + enum { +- MMAL_COMPONENT_CAMERA = 0, +- MMAL_COMPONENT_PREVIEW, +- MMAL_COMPONENT_IMAGE_ENCODE, +- MMAL_COMPONENT_VIDEO_ENCODE, +- MMAL_COMPONENT_COUNT ++ COMP_CAMERA = 0, ++ COMP_PREVIEW, ++ COMP_IMAGE_ENCODE, ++ COMP_VIDEO_ENCODE, ++ COMP_COUNT + }; + + enum { +- MMAL_CAMERA_PORT_PREVIEW = 0, +- MMAL_CAMERA_PORT_VIDEO, +- MMAL_CAMERA_PORT_CAPTURE, +- MMAL_CAMERA_PORT_COUNT ++ CAM_PORT_PREVIEW = 0, ++ CAM_PORT_VIDEO, ++ CAM_PORT_CAPTURE, ++ CAM_PORT_COUNT + }; + + #define PREVIEW_LAYER 2 +@@ -61,7 +61,7 @@ struct bm2835_mmal_dev { + + /* allocated mmal instance and components */ + struct vchiq_mmal_instance *instance; +- struct vchiq_mmal_component *component[MMAL_COMPONENT_COUNT]; ++ struct vchiq_mmal_component *component[COMP_COUNT]; + int camera_use_count; + + struct v4l2_window overlay; +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -176,7 +176,7 @@ static int ctrl_set_rational(struct bm28 + struct mmal_parameter_rational rational_value; + struct vchiq_mmal_port *control; + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + rational_value.num = ctrl->val; + rational_value.den = 100; +@@ -194,7 +194,7 @@ static int ctrl_set_value(struct bm2835_ + u32 u32_value; + struct vchiq_mmal_port *control; + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + u32_value = ctrl->val; + +@@ -219,7 +219,7 @@ static int ctrl_set_iso(struct bm2835_mm + dev->manual_iso_enabled = + (ctrl->val == V4L2_ISO_SENSITIVITY_MANUAL); + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + if (dev->manual_iso_enabled) + u32_value = dev->iso; +@@ -238,7 +238,7 @@ static int ctrl_set_value_ev(struct bm28 + s32 s32_value; + struct vchiq_mmal_port *control; + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + s32_value = (ctrl->val - 12) * 2; /* Convert from index to 1/6ths */ + +@@ -255,7 +255,7 @@ static int ctrl_set_rotate(struct bm2835 + u32 u32_value; + struct vchiq_mmal_component *camera; + +- camera = dev->component[MMAL_COMPONENT_CAMERA]; ++ camera = dev->component[COMP_CAMERA]; + + u32_value = ((ctrl->val % 360) / 90) * 90; + +@@ -291,7 +291,7 @@ static int ctrl_set_flip(struct bm2835_m + else + dev->vflip = ctrl->val; + +- camera = dev->component[MMAL_COMPONENT_CAMERA]; ++ camera = dev->component[COMP_CAMERA]; + + if (dev->hflip && dev->vflip) + u32_value = MMAL_PARAM_MIRROR_BOTH; +@@ -330,7 +330,7 @@ static int ctrl_set_exposure(struct bm28 + struct vchiq_mmal_port *control; + int ret = 0; + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + if (mmal_ctrl->mmal_id == MMAL_PARAMETER_SHUTTER_SPEED) { + /* V4L2 is in 100usec increments. +@@ -405,7 +405,7 @@ static int ctrl_set_metering_mode(struct + struct vchiq_mmal_port *control; + u32 u32_value = dev->metering_mode; + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + return vchiq_mmal_port_parameter_set(dev->instance, control, + mmal_ctrl->mmal_id, +@@ -421,7 +421,7 @@ static int ctrl_set_flicker_avoidance(st + u32 u32_value; + struct vchiq_mmal_port *control; + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + switch (ctrl->val) { + case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED: +@@ -450,7 +450,7 @@ static int ctrl_set_awb_mode(struct bm28 + u32 u32_value; + struct vchiq_mmal_port *control; + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + switch (ctrl->val) { + case V4L2_WHITE_BALANCE_MANUAL: +@@ -506,7 +506,7 @@ static int ctrl_set_awb_gains(struct bm2 + struct vchiq_mmal_port *control; + struct mmal_parameter_awbgains gains; + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + if (ctrl->id == V4L2_CID_RED_BALANCE) + dev->red_gain = ctrl->val; +@@ -554,7 +554,7 @@ static int ctrl_set_image_effect(struct + v4l2_to_mmal_effects_values[i].v; + } + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + ret = vchiq_mmal_port_parameter_set( + dev->instance, control, +@@ -587,7 +587,7 @@ static int ctrl_set_colfx(struct bm2835_ + int ret = -EINVAL; + struct vchiq_mmal_port *control; + +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + dev->colourfx.enable = (ctrl->val & 0xff00) >> 8; + dev->colourfx.enable = ctrl->val & 0xff; +@@ -613,7 +613,7 @@ static int ctrl_set_bitrate(struct bm283 + + dev->capture.encode_bitrate = ctrl->val; + +- encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ encoder_out = &dev->component[COMP_VIDEO_ENCODE]->output[0]; + + ret = vchiq_mmal_port_parameter_set(dev->instance, encoder_out, + mmal_ctrl->mmal_id, +@@ -629,7 +629,7 @@ static int ctrl_set_bitrate_mode(struct + u32 bitrate_mode; + struct vchiq_mmal_port *encoder_out; + +- encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ encoder_out = &dev->component[COMP_VIDEO_ENCODE]->output[0]; + + dev->capture.encode_bitrate_mode = ctrl->val; + switch (ctrl->val) { +@@ -656,7 +656,7 @@ static int ctrl_set_image_encode_output( + u32 u32_value; + struct vchiq_mmal_port *jpeg_out; + +- jpeg_out = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; ++ jpeg_out = &dev->component[COMP_IMAGE_ENCODE]->output[0]; + + u32_value = ctrl->val; + +@@ -672,7 +672,7 @@ static int ctrl_set_video_encode_param_o + u32 u32_value; + struct vchiq_mmal_port *vid_enc_ctl; + +- vid_enc_ctl = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ vid_enc_ctl = &dev->component[COMP_VIDEO_ENCODE]->output[0]; + + u32_value = ctrl->val; + +@@ -785,7 +785,7 @@ static int ctrl_set_video_encode_profile + } + + ret = vchiq_mmal_port_parameter_set(dev->instance, +- &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0], ++ &dev->component[COMP_VIDEO_ENCODE]->output[0], + mmal_ctrl->mmal_id, + ¶m, sizeof(param)); + } +@@ -803,7 +803,7 @@ static int ctrl_set_scene_mode(struct bm + v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, + "scene mode selected %d, was %d\n", ctrl->val, + dev->scene_mode); +- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ control = &dev->component[COMP_CAMERA]->control; + + if (ctrl->val == dev->scene_mode) + return 0; +@@ -1221,18 +1221,15 @@ int set_framerate_params(struct bm2835_m + fps_range.fps_high.den); + + ret = vchiq_mmal_port_parameter_set(dev->instance, +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_PREVIEW], ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW], + MMAL_PARAMETER_FPS_RANGE, + &fps_range, sizeof(fps_range)); + ret += vchiq_mmal_port_parameter_set(dev->instance, +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_VIDEO], ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO], + MMAL_PARAMETER_FPS_RANGE, + &fps_range, sizeof(fps_range)); + ret += vchiq_mmal_port_parameter_set(dev->instance, +- &dev->component[MMAL_COMPONENT_CAMERA]-> +- output[MMAL_CAMERA_PORT_CAPTURE], ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE], + MMAL_PARAMETER_FPS_RANGE, + &fps_range, sizeof(fps_range)); + if (ret) diff --git a/target/linux/brcm2708/patches-4.19/950-0227-staging-bcm2835-camera-Fix-multiple-line-dereference.patch b/target/linux/brcm2708/patches-4.19/950-0227-staging-bcm2835-camera-Fix-multiple-line-dereference.patch new file mode 100644 index 0000000000..7797510096 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0227-staging-bcm2835-camera-Fix-multiple-line-dereference.patch @@ -0,0 +1,133 @@ +From 2730c4538b6edbe1e9d4071a8a64aa62f655eeaa Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 21 Feb 2018 15:28:07 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix multiple line + dereference errors + +Fix checkpatch errors "Avoid multiple line dereference" + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/bcm2835-camera.c | 41 +++++++------------ + 1 file changed, 14 insertions(+), 27 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -313,8 +313,7 @@ static void buffer_cleanup(struct vb2_bu + static inline bool is_capturing(struct bm2835_mmal_dev *dev) + { + return dev->capture.camera_port == +- &dev-> +- component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; + } + + static void buffer_cb(struct vchiq_mmal_instance *instance, +@@ -795,8 +794,7 @@ static int vidioc_overlay(struct file *f + return 0; /* already in requested state */ + + src = +- &dev->component[COMP_CAMERA]-> +- output[CAM_PORT_PREVIEW]; ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW]; + + if (!on) { + /* disconnect preview ports and disable component */ +@@ -853,8 +851,7 @@ static int vidioc_g_fbuf(struct file *fi + */ + struct bm2835_mmal_dev *dev = video_drvdata(file); + struct vchiq_mmal_port *preview_port = +- &dev->component[COMP_CAMERA]-> +- output[CAM_PORT_PREVIEW]; ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW]; + + a->capability = V4L2_FBUF_CAP_EXTERNOVERLAY | + V4L2_FBUF_CAP_GLOBAL_ALPHA; +@@ -1046,8 +1043,7 @@ static int mmal_setup_components(struct + dev->capture.camera_port, NULL); + dev->capture.camera_port = NULL; + ret = vchiq_mmal_component_disable(dev->instance, +- dev->capture. +- encode_component); ++ dev->capture.encode_component); + if (ret) + v4l2_err(&dev->v4l2_dev, + "Failed to disable encode component %d\n", +@@ -1062,26 +1058,22 @@ static int mmal_setup_components(struct + if (f->fmt.pix.width <= max_video_width + && f->fmt.pix.height <= max_video_height) + camera_port = port = +- &dev->component[COMP_CAMERA]-> +- output[CAM_PORT_VIDEO]; ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]; + else + camera_port = port = +- &dev->component[COMP_CAMERA]-> +- output[CAM_PORT_CAPTURE]; ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; + break; + case COMP_IMAGE_ENCODE: + encode_component = dev->component[COMP_IMAGE_ENCODE]; + port = &dev->component[COMP_IMAGE_ENCODE]->output[0]; + camera_port = +- &dev->component[COMP_CAMERA]-> +- output[CAM_PORT_CAPTURE]; ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; + break; + case COMP_VIDEO_ENCODE: + encode_component = dev->component[COMP_VIDEO_ENCODE]; + port = &dev->component[COMP_VIDEO_ENCODE]->output[0]; + camera_port = +- &dev->component[COMP_CAMERA]-> +- output[CAM_PORT_VIDEO]; ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]; + break; + default: + break; +@@ -1123,8 +1115,7 @@ static int mmal_setup_components(struct + + if (!ret + && camera_port == +- &dev->component[COMP_CAMERA]-> +- output[CAM_PORT_VIDEO]) { ++ &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]) { + bool overlay_enabled = + !!dev->component[COMP_PREVIEW]->enabled; + struct vchiq_mmal_port *preview_port = +@@ -1261,9 +1252,8 @@ static int mmal_setup_components(struct + port->current_buffer.size); + port->current_buffer.size = + (f->fmt.pix.sizeimage < +- (100 << 10)) +- ? (100 << 10) +- : f->fmt.pix.sizeimage; ++ (100 << 10)) ? ++ (100 << 10) : f->fmt.pix.sizeimage; + } + v4l2_dbg(1, bcm2835_v4l2_debug, + &dev->v4l2_dev, +@@ -1722,8 +1712,7 @@ static int mmal_init(struct bm2835_mmal_ + + /* get the video encoder component ready */ + ret = vchiq_mmal_component_init(dev->instance, "ril.video_encode", +- &dev-> +- component[COMP_VIDEO_ENCODE]); ++ &dev->component[COMP_VIDEO_ENCODE]); + if (ret < 0) + goto unreg_image_encoder; + +@@ -1846,12 +1835,10 @@ static void bcm2835_cleanup_instance(str + dev->component[COMP_CAMERA]); + + vchiq_mmal_component_finalise(dev->instance, +- dev-> +- component[COMP_VIDEO_ENCODE]); ++ dev->component[COMP_VIDEO_ENCODE]); + + vchiq_mmal_component_finalise(dev->instance, +- dev-> +- component[COMP_IMAGE_ENCODE]); ++ dev->component[COMP_IMAGE_ENCODE]); + + vchiq_mmal_component_finalise(dev->instance, + dev->component[COMP_PREVIEW]); diff --git a/target/linux/brcm2708/patches-4.19/950-0227-staging-bcm2835-camera-fix-module-autoloading.patch b/target/linux/brcm2708/patches-4.19/950-0227-staging-bcm2835-camera-fix-module-autoloading.patch deleted file mode 100644 index 85dd3fede3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0227-staging-bcm2835-camera-fix-module-autoloading.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 8b6e9f2a951b38becf5b8a1e99ba1993f7751aac Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 20 Oct 2018 19:26:18 +0200 -Subject: [PATCH 227/806] staging: bcm2835-camera: fix module autoloading - -In order to make the module bcm2835-camera load automatically, we need to -add a module alias. - -Fixes: 4bebb0312ea9 ("staging/bcm2835-camera: Set ourselves up as a platform driver.") -Signed-off-by: Stefan Wahren ---- - drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -47,6 +47,7 @@ MODULE_DESCRIPTION("Broadcom 2835 MMAL v - MODULE_AUTHOR("Vincent Sanders"); - MODULE_LICENSE("GPL"); - MODULE_VERSION(BM2835_MMAL_VERSION); -+MODULE_ALIAS("platform:bcm2835-camera"); - - int bcm2835_v4l2_debug; - module_param_named(debug, bcm2835_v4l2_debug, int, 0644); diff --git a/target/linux/brcm2708/patches-4.19/950-0228-staging-bcm2835-camera-Fix-brace-style-issues.patch b/target/linux/brcm2708/patches-4.19/950-0228-staging-bcm2835-camera-Fix-brace-style-issues.patch new file mode 100644 index 0000000000..6aa8e93118 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0228-staging-bcm2835-camera-Fix-brace-style-issues.patch @@ -0,0 +1,56 @@ +From a023ee926b7e923058203e82edc5405c1e82842c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 21 Feb 2018 15:37:11 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix brace style issues. + +Fix mismatched or missing brace issues flagged by checkpatch. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 3 ++- + drivers/staging/vc04_services/bcm2835-camera/controls.c | 3 ++- + drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c | 3 ++- + 3 files changed, 6 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -569,10 +569,11 @@ static int start_streaming(struct vb2_qu + + /* Flag to indicate just to rely on kernel timestamps */ + dev->capture.vc_start_timestamp = -1; +- } else ++ } else { + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "Start time %lld size %d\n", + dev->capture.vc_start_timestamp, parameter_size); ++ } + + dev->capture.kernel_start_ts = ktime_get(); + dev->capture.last_timestamp = 0; +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -410,8 +410,9 @@ static int ctrl_set_metering_mode(struct + return vchiq_mmal_port_parameter_set(dev->instance, control, + mmal_ctrl->mmal_id, + &u32_value, sizeof(u32_value)); +- } else ++ } else { + return 0; ++ } + } + + static int ctrl_set_flicker_avoidance(struct bm2835_mmal_dev *dev, +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c +@@ -1268,9 +1268,10 @@ static int port_parameter_get(struct vch + memcpy(value, &rmsg->u.port_parameter_get_reply.value, + *value_size); + *value_size = rmsg->u.port_parameter_get_reply.size; +- } else ++ } else { + memcpy(value, &rmsg->u.port_parameter_get_reply.value, + rmsg->u.port_parameter_get_reply.size); ++ } + + pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, + ret, port->component->handle, port->handle, parameter_id); diff --git a/target/linux/brcm2708/patches-4.19/950-0228-staging-bcm2835-camera-Move-module-info-to-the-end.patch b/target/linux/brcm2708/patches-4.19/950-0228-staging-bcm2835-camera-Move-module-info-to-the-end.patch deleted file mode 100644 index b4d1969ed9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0228-staging-bcm2835-camera-Move-module-info-to-the-end.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 3e8dfb23cfab3003ff83f4d32568ae4e38536572 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 20 Oct 2018 19:31:00 +0200 -Subject: [PATCH 228/806] staging: bcm2835-camera: Move module info to the end - -In order to have this more consistent between the vc04 services move -the module information to the end of the file. - -Signed-off-by: Stefan Wahren ---- - .../vc04_services/bcm2835-camera/bcm2835-camera.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -43,12 +43,6 @@ - - #define MAX_BCM2835_CAMERAS 2 - --MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture"); --MODULE_AUTHOR("Vincent Sanders"); --MODULE_LICENSE("GPL"); --MODULE_VERSION(BM2835_MMAL_VERSION); --MODULE_ALIAS("platform:bcm2835-camera"); -- - int bcm2835_v4l2_debug; - module_param_named(debug, bcm2835_v4l2_debug, int, 0644); - MODULE_PARM_DESC(bcm2835_v4l2_debug, "Debug level 0-2"); -@@ -1980,3 +1974,9 @@ static struct platform_driver bcm2835_ca - }; - - module_platform_driver(bcm2835_camera_driver) -+ -+MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture"); -+MODULE_AUTHOR("Vincent Sanders"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(BM2835_MMAL_VERSION); -+MODULE_ALIAS("platform:bcm2835-camera"); diff --git a/target/linux/brcm2708/patches-4.19/950-0229-staging-bcm2835-camera-Fix-missing-lines-between-ite.patch b/target/linux/brcm2708/patches-4.19/950-0229-staging-bcm2835-camera-Fix-missing-lines-between-ite.patch new file mode 100644 index 0000000000..2780112b39 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0229-staging-bcm2835-camera-Fix-missing-lines-between-ite.patch @@ -0,0 +1,35 @@ +From 6974c0c97b821c30af9f6f4ff9b4b6989cb5a573 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 21 Feb 2018 15:39:26 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix missing lines between + items + +Fix checkpatch errors for missing blank lines after variable +or structure declarations. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h | 1 + + drivers/staging/vc04_services/bcm2835-camera/controls.c | 1 + + 2 files changed, 2 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h +@@ -130,6 +130,7 @@ int set_framerate_params(struct bm2835_m + (pix_fmt)->pixelformat, (pix_fmt)->bytesperline, \ + (pix_fmt)->sizeimage, (pix_fmt)->colorspace, (pix_fmt)->priv); \ + } ++ + #define v4l2_dump_win_format(level, debug, dev, win_fmt, desc) \ + { \ + v4l2_dbg(level, debug, dev, \ +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -53,6 +53,7 @@ static const s64 ev_bias_qmenu[] = { + static const s64 iso_qmenu[] = { + 0, 100000, 200000, 400000, 800000, + }; ++ + static const uint32_t iso_values[] = { + 0, 100, 200, 400, 800, + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0229-staging-vchiq_arm-Fix-platform-device-unregistration.patch b/target/linux/brcm2708/patches-4.19/950-0229-staging-vchiq_arm-Fix-platform-device-unregistration.patch deleted file mode 100644 index 69bd520461..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0229-staging-vchiq_arm-Fix-platform-device-unregistration.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 1ada615db1b97faec9c4625ccfd2cc35d54d850a Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 13 Oct 2018 20:51:23 +0200 -Subject: [PATCH 229/806] staging: vchiq_arm: Fix platform device - unregistration - -In error case platform_device_register_data would return an ERR_PTR -instead of NULL. So we better check this before unregistration. - -Fixes: 37b7b3087a2f ("staging/vc04_services: Register a platform device for the camera driver.") -Signed-off-by: Stefan Wahren ---- - drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -3656,7 +3656,8 @@ failed_platform_init: - - static int vchiq_remove(struct platform_device *pdev) - { -- platform_device_unregister(bcm2835_camera); -+ if (!IS_ERR(bcm2835_camera)) -+ platform_device_unregister(bcm2835_camera); - vchiq_debugfs_deinit(); - device_destroy(vchiq_class, vchiq_devid); - class_destroy(vchiq_class); diff --git a/target/linux/brcm2708/patches-4.19/950-0230-staging-bcm2835-camera-Fix-logical-continuation-spli.patch b/target/linux/brcm2708/patches-4.19/950-0230-staging-bcm2835-camera-Fix-logical-continuation-spli.patch new file mode 100644 index 0000000000..8d6b7a931b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0230-staging-bcm2835-camera-Fix-logical-continuation-spli.patch @@ -0,0 +1,49 @@ +From 5056b62708ac730f36114e1d792d0cc878b43561 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 21 Feb 2018 15:48:54 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix logical continuation + splits + +Fix checkpatch errors for "Logical continuations should be +on the previous line". + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-camera/bcm2835-camera.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -545,8 +545,8 @@ static int start_streaming(struct vb2_qu + msleep(300); + + /* enable the connection from camera to encoder (if applicable) */ +- if (dev->capture.camera_port != dev->capture.port +- && dev->capture.camera_port) { ++ if (dev->capture.camera_port != dev->capture.port && ++ dev->capture.camera_port) { + ret = vchiq_mmal_port_enable(dev->instance, + dev->capture.camera_port, NULL); + if (ret) { +@@ -1056,8 +1056,8 @@ static int mmal_setup_components(struct + switch (mfmt->mmal_component) { + case COMP_CAMERA: + /* Make a further decision on port based on resolution */ +- if (f->fmt.pix.width <= max_video_width +- && f->fmt.pix.height <= max_video_height) ++ if (f->fmt.pix.width <= max_video_width && ++ f->fmt.pix.height <= max_video_height) + camera_port = port = + &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]; + else +@@ -1114,8 +1114,8 @@ static int mmal_setup_components(struct + + ret = vchiq_mmal_port_set_format(dev->instance, camera_port); + +- if (!ret +- && camera_port == ++ if (!ret && ++ camera_port == + &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]) { + bool overlay_enabled = + !!dev->component[COMP_PREVIEW]->enabled; diff --git a/target/linux/brcm2708/patches-4.19/950-0230-staging-vchiq_arm-Fix-camera-device-registration.patch b/target/linux/brcm2708/patches-4.19/950-0230-staging-vchiq_arm-Fix-camera-device-registration.patch deleted file mode 100644 index cb7edc4b11..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0230-staging-vchiq_arm-Fix-camera-device-registration.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 58ed78a70c3c3ef1ae99aefdd2c28ac81f66df85 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Mon, 22 Oct 2018 15:16:51 +0200 -Subject: [PATCH 230/806] staging: vchiq_arm: Fix camera device registration - -Since the camera driver isn't probed via DT, we need to properly setup DMA. - -Fixes: 37b7b3087a2f ("staging/vc04_services: Register a platform device for the camera driver.") -Signed-off-by: Stefan Wahren ---- - .../interface/vchiq_arm/vchiq_arm.c | 20 ++++++++++++++++--- - 1 file changed, 17 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -49,6 +49,7 @@ - #include - #include - #include -+#include - #include - - #include "vchiq_core.h" -@@ -3578,6 +3579,21 @@ void vchiq_platform_conn_state_changed(V - } - } - -+static struct platform_device * -+vchiq_register_child(struct platform_device *pdev, const char *name) -+{ -+ struct platform_device_info pdevinfo; -+ -+ memset(&pdevinfo, 0, sizeof(pdevinfo)); -+ -+ pdevinfo.parent = &pdev->dev; -+ pdevinfo.name = name; -+ pdevinfo.id = PLATFORM_DEVID_NONE; -+ pdevinfo.dma_mask = DMA_BIT_MASK(32); -+ -+ return platform_device_register_full(&pdevinfo); -+} -+ - static int vchiq_probe(struct platform_device *pdev) - { - struct device_node *fw_node; -@@ -3637,9 +3653,7 @@ static int vchiq_probe(struct platform_d - VCHIQ_VERSION, VCHIQ_VERSION_MIN, - MAJOR(vchiq_devid), MINOR(vchiq_devid)); - -- bcm2835_camera = platform_device_register_data(&pdev->dev, -- "bcm2835-camera", -1, -- NULL, 0); -+ bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); - - return 0; - diff --git a/target/linux/brcm2708/patches-4.19/950-0231-staging-bcm2835-camera-Fix-open-parenthesis-alignmen.patch b/target/linux/brcm2708/patches-4.19/950-0231-staging-bcm2835-camera-Fix-open-parenthesis-alignmen.patch new file mode 100644 index 0000000000..85c7f1ea3b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0231-staging-bcm2835-camera-Fix-open-parenthesis-alignmen.patch @@ -0,0 +1,137 @@ +From 4ed895c5c9f55f565d5ecc19e799e109673db44f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 21 Feb 2018 15:53:59 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix open parenthesis + alignment + +Fix checkpatch "Alignment should match open parenthesis" +errors. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/bcm2835-camera.c | 12 ++++----- + .../vc04_services/bcm2835-camera/controls.c | 25 ++++++++++++------- + .../vc04_services/bcm2835-camera/mmal-vchiq.c | 2 +- + .../vc04_services/bcm2835-camera/mmal-vchiq.h | 6 ++--- + 4 files changed, 25 insertions(+), 20 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -415,8 +415,7 @@ static void buffer_cb(struct vchiq_mmal_ + buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; + + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, +- "Buffer has ts %llu", +- dev->capture.last_timestamp); ++ "Buffer has ts %llu", dev->capture.last_timestamp); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); + + if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && +@@ -584,8 +583,8 @@ static int start_streaming(struct vb2_qu + vchiq_mmal_port_enable(dev->instance, dev->capture.port, buffer_cb); + if (ret) { + v4l2_err(&dev->v4l2_dev, +- "Failed to enable capture port - error %d. Disabling camera port again\n", +- ret); ++ "Failed to enable capture port - error %d. Disabling camera port again\n", ++ ret); + + vchiq_mmal_port_disable(dev->instance, + dev->capture.camera_port); +@@ -991,8 +990,7 @@ static int vidioc_try_fmt_vid_cap(struct + f->fmt.pix.bytesperline = + (f->fmt.pix.bytesperline + align_mask) & ~align_mask; + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, +- "Not removing padding, so bytes/line = %d, " +- "(align_mask %d)\n", ++ "Not removing padding, so bytes/line = %d, (align_mask %d)\n", + f->fmt.pix.bytesperline, align_mask); + } + +@@ -1338,7 +1336,7 @@ static int vidioc_s_fmt_vid_cap(struct f + } + + static int vidioc_enum_framesizes(struct file *file, void *fh, +- struct v4l2_frmsizeenum *fsize) ++ struct v4l2_frmsizeenum *fsize) + { + struct bm2835_mmal_dev *dev = video_drvdata(file); + static const struct v4l2_frmsize_stepwise sizes = { +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -1254,9 +1254,12 @@ int bm2835_mmal_init_controls(struct bm2 + + switch (ctrl->type) { + case MMAL_CONTROL_TYPE_STD: +- dev->ctrls[c] = v4l2_ctrl_new_std(hdl, +- &bm2835_mmal_ctrl_ops, ctrl->id, +- ctrl->min, ctrl->max, ctrl->step, ctrl->def); ++ dev->ctrls[c] = ++ v4l2_ctrl_new_std(hdl, ++ &bm2835_mmal_ctrl_ops, ++ ctrl->id, ctrl->min, ++ ctrl->max, ctrl->step, ++ ctrl->def); + break; + + case MMAL_CONTROL_TYPE_STD_MENU: +@@ -1280,16 +1283,20 @@ int bm2835_mmal_init_controls(struct bm2 + mask = ~mask; + } + +- dev->ctrls[c] = v4l2_ctrl_new_std_menu(hdl, +- &bm2835_mmal_ctrl_ops, ctrl->id, +- ctrl->max, mask, ctrl->def); ++ dev->ctrls[c] = ++ v4l2_ctrl_new_std_menu(hdl, ++ &bm2835_mmal_ctrl_ops, ++ ctrl->id, ctrl->max, ++ mask, ctrl->def); + break; + } + + case MMAL_CONTROL_TYPE_INT_MENU: +- dev->ctrls[c] = v4l2_ctrl_new_int_menu(hdl, +- &bm2835_mmal_ctrl_ops, ctrl->id, +- ctrl->max, ctrl->def, ctrl->imenu); ++ dev->ctrls[c] = ++ v4l2_ctrl_new_int_menu(hdl, ++ &bm2835_mmal_ctrl_ops, ++ ctrl->id, ctrl->max, ++ ctrl->def, ctrl->imenu); + break; + + case MMAL_CONTROL_TYPE_CLUSTER: +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c +@@ -651,7 +651,7 @@ static int send_synchronous_mmal_msg(str + if (payload_len > + (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) { + pr_err("payload length %d exceeds max:%d\n", payload_len, +- (int)(MMAL_MSG_MAX_SIZE - ++ (int)(MMAL_MSG_MAX_SIZE - + sizeof(struct mmal_msg_header))); + return -EINVAL; + } +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h +@@ -131,7 +131,7 @@ int vchiq_mmal_port_enable( + * disable a port will dequeue any pending buffers + */ + int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port); ++ struct vchiq_mmal_port *port); + + int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, + struct vchiq_mmal_port *port, +@@ -149,8 +149,8 @@ int vchiq_mmal_port_set_format(struct vc + struct vchiq_mmal_port *port); + + int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *src, +- struct vchiq_mmal_port *dst); ++ struct vchiq_mmal_port *src, ++ struct vchiq_mmal_port *dst); + + int vchiq_mmal_version(struct vchiq_mmal_instance *instance, + u32 *major_out, diff --git a/target/linux/brcm2708/patches-4.19/950-0231-staging-vchiq_arm-Register-a-platform-device-for-the.patch b/target/linux/brcm2708/patches-4.19/950-0231-staging-vchiq_arm-Register-a-platform-device-for-the.patch deleted file mode 100644 index 511dee0b59..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0231-staging-vchiq_arm-Register-a-platform-device-for-the.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 0ca486925a32b7c95752ff250afdd59bcf6c8574 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 20 Oct 2018 20:25:41 +0200 -Subject: [PATCH 231/806] staging: vchiq_arm: Register a platform device for - the audio driver - -Signed-off-by: Stefan Wahren ---- - drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -170,6 +170,7 @@ static struct class *vchiq_class; - static struct device *vchiq_dev; - static DEFINE_SPINLOCK(msg_queue_spinlock); - static struct platform_device *bcm2835_camera; -+static struct platform_device *bcm2835_audio; - - static const char *const ioctl_names[] = { - "CONNECT", -@@ -3654,6 +3655,7 @@ static int vchiq_probe(struct platform_d - MAJOR(vchiq_devid), MINOR(vchiq_devid)); - - bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); -+ bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio"); - - return 0; - -@@ -3670,6 +3672,8 @@ failed_platform_init: - - static int vchiq_remove(struct platform_device *pdev) - { -+ if (!IS_ERR(bcm2835_audio)) -+ platform_device_unregister(bcm2835_audio); - if (!IS_ERR(bcm2835_camera)) - platform_device_unregister(bcm2835_camera); - vchiq_debugfs_deinit(); diff --git a/target/linux/brcm2708/patches-4.19/950-0232-staging-bcm2835-audio-Enable-compile-test.patch b/target/linux/brcm2708/patches-4.19/950-0232-staging-bcm2835-audio-Enable-compile-test.patch deleted file mode 100644 index c85e6bbe12..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0232-staging-bcm2835-audio-Enable-compile-test.patch +++ /dev/null @@ -1,22 +0,0 @@ -From d08cc93a489df7707afaaa693afd2e7a153c85a3 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 13 Oct 2018 20:19:13 +0200 -Subject: [PATCH 232/806] staging: bcm2835-audio: Enable compile test - -Enable the compilation test for bcm2835-audio. - -Signed-off-by: Stefan Wahren ---- - drivers/staging/vc04_services/bcm2835-audio/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/Kconfig -+++ b/drivers/staging/vc04_services/bcm2835-audio/Kconfig -@@ -1,6 +1,6 @@ - config SND_BCM2835 - tristate "BCM2835 Audio" -- depends on ARCH_BCM2835 && SND -+ depends on (ARCH_BCM2835 || COMPILE_TEST) && SND - select SND_PCM - select BCM2835_VCHIQ - help diff --git a/target/linux/brcm2708/patches-4.19/950-0232-staging-bcm2835-camera-Set-sequence-number-correctly.patch b/target/linux/brcm2708/patches-4.19/950-0232-staging-bcm2835-camera-Set-sequence-number-correctly.patch new file mode 100644 index 0000000000..dbfa67cfe6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0232-staging-bcm2835-camera-Set-sequence-number-correctly.patch @@ -0,0 +1,46 @@ +From ba37d62e7bbdf42c2fa9ac3655354992da199a4b Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 21 Jun 2018 17:02:14 +0100 +Subject: [PATCH] staging: bcm2835-camera: Set sequence number + correctly + +Set the sequence number in vb2_v4l2_buffer mainly so the +latest v4l2-ctl reports the frame rate correctly. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 4 ++++ + drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h | 2 ++ + 2 files changed, 6 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -409,6 +409,7 @@ static void buffer_cb(struct vchiq_mmal_ + } + } + dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; ++ buf->vb.sequence = dev->capture.sequence++; + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); + if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) +@@ -537,6 +538,9 @@ static int start_streaming(struct vb2_qu + /* enable frame capture */ + dev->capture.frame_count = 1; + ++ /* reset sequence number */ ++ dev->capture.sequence = 0; ++ + /* if the preview is not already running, wait for a few frames for AGC + * to settle down. + */ +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h +@@ -93,6 +93,8 @@ struct bm2835_mmal_dev { + ktime_t kernel_start_ts; + /* Timestamp of last frame */ + u64 last_timestamp; ++ /* Sequence number of last buffer */ ++ u32 sequence; + + struct vchiq_mmal_port *port; /* port being used for capture */ + /* camera port being used for capture */ diff --git a/target/linux/brcm2708/patches-4.19/950-0233-staging-bcm2835-audio-use-module_platform_driver-mac.patch b/target/linux/brcm2708/patches-4.19/950-0233-staging-bcm2835-audio-use-module_platform_driver-mac.patch deleted file mode 100644 index 5920a012dc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0233-staging-bcm2835-audio-use-module_platform_driver-mac.patch +++ /dev/null @@ -1,43 +0,0 @@ -From f1aada1b4c974fa756e299c15b62c76e478e652e Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Thu, 18 Oct 2018 19:47:29 +0200 -Subject: [PATCH 233/806] staging: bcm2835-audio: use module_platform_driver() - macro - -There is not much value behind this boilerplate, so use -module_platform_driver() instead. - -Signed-off-by: Stefan Wahren ---- - .../vc04_services/bcm2835-audio/bcm2835.c | 20 +------------------ - 1 file changed, 1 insertion(+), 19 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -470,25 +470,7 @@ static struct platform_driver bcm2835_al - .of_match_table = snd_bcm2835_of_match_table, - }, - }; -- --static int bcm2835_alsa_device_init(void) --{ -- int retval; -- -- retval = platform_driver_register(&bcm2835_alsa0_driver); -- if (retval) -- pr_err("Error registering bcm2835_audio driver %d .\n", retval); -- -- return retval; --} -- --static void bcm2835_alsa_device_exit(void) --{ -- platform_driver_unregister(&bcm2835_alsa0_driver); --} -- --late_initcall(bcm2835_alsa_device_init); --module_exit(bcm2835_alsa_device_exit); -+module_platform_driver(bcm2835_alsa0_driver); - - MODULE_AUTHOR("Dom Cobley"); - MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); diff --git a/target/linux/brcm2708/patches-4.19/950-0233-staging-bcm2835-camera-Ensure-timestamps-never-go-ba.patch b/target/linux/brcm2708/patches-4.19/950-0233-staging-bcm2835-camera-Ensure-timestamps-never-go-ba.patch new file mode 100644 index 0000000000..802ff8b33f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0233-staging-bcm2835-camera-Ensure-timestamps-never-go-ba.patch @@ -0,0 +1,38 @@ +From 0d0b7a58ab065f72ffa55fbc7ab5436628694919 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 24 Jul 2018 12:08:29 +0100 +Subject: [PATCH] staging: bcm2835-camera: Ensure timestamps never go + backwards. + +There is an awkward situation with H264 header bytes. Currently +they are returned with a PTS of 0 because they aren't associated +with a timestamped frame to encode. These are handled by either +returning the timestamp of the last buffer to have been received, +or in the case of the first buffer the timestamp taken at +start_streaming. +This results in a race where the current frame may have started +before we take the start time, which results in the first encoded +frame having an earlier timestamp than the header bytes. + +Ensure that we never return a negative delta to the user by checking +against the previous timestamp. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -393,6 +393,11 @@ static void buffer_cb(struct vchiq_mmal_ + ktime_to_ns(dev->capture.kernel_start_ts), + dev->capture.vc_start_timestamp, pts, + ktime_to_ns(timestamp)); ++ if (timestamp < dev->capture.last_timestamp) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Negative delta - using last time\n"); ++ timestamp = dev->capture.last_timestamp; ++ } + buf->vb.vb2_buf.timestamp = ktime_to_ns(timestamp); + } else { + if (dev->capture.last_timestamp) { diff --git a/target/linux/brcm2708/patches-4.19/950-0234-staging-bcm2835-audio-Drop-DT-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0234-staging-bcm2835-audio-Drop-DT-dependency.patch deleted file mode 100644 index 62b4282efe..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0234-staging-bcm2835-audio-Drop-DT-dependency.patch +++ /dev/null @@ -1,116 +0,0 @@ -From ba833c9b912d2ca6fe23d700c4bd6f61742d5e04 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Thu, 18 Oct 2018 19:54:01 +0200 -Subject: [PATCH 234/806] staging: bcm2835-audio: Drop DT dependency - -Just like the bcm2835-video make this a platform driver which is probed -by vchiq. In order to change the number of channels use a module -parameter instead, but use the maximum as default. - -Signed-off-by: Stefan Wahren ---- - .../vc04_services/bcm2835-audio/bcm2835.c | 41 +++++++++---------- - 1 file changed, 19 insertions(+), 22 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -4,15 +4,17 @@ - #include - - #include -+#include -+#include - #include - #include --#include - - #include "bcm2835.h" - - static bool enable_hdmi; - static bool enable_headphones; - static bool enable_compat_alsa = true; -+static int num_channels = MAX_SUBSTREAMS; - - module_param(enable_hdmi, bool, 0444); - MODULE_PARM_DESC(enable_hdmi, "Enables HDMI virtual audio device"); -@@ -21,6 +23,8 @@ MODULE_PARM_DESC(enable_headphones, "Ena - module_param(enable_compat_alsa, bool, 0444); - MODULE_PARM_DESC(enable_compat_alsa, - "Enables ALSA compatibility virtual audio device"); -+module_param(num_channels, int, 0644); -+MODULE_PARM_DESC(num_channels, "Number of audio channels (default: 8)"); - - static void snd_devm_unregister_child(struct device *dev, void *res) - { -@@ -407,31 +411,30 @@ static int snd_add_child_devices(struct - return 0; - } - --static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) -+static int snd_bcm2835_alsa_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -- u32 numchans; - int err; - -- err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", -- &numchans); -- if (err) { -- dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); -- return err; -+ if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) { -+ num_channels = MAX_SUBSTREAMS; -+ dev_warn(dev, "Illegal num_channels value, will use %u\n", -+ num_channels); - } - -- if (numchans == 0 || numchans > MAX_SUBSTREAMS) { -- numchans = MAX_SUBSTREAMS; -- dev_warn(dev, -- "Illegal 'brcm,pwm-channels' value, will use %u\n", -- numchans); -+ dev->coherent_dma_mask = DMA_BIT_MASK(32); -+ dev->dma_mask = &dev->coherent_dma_mask; -+ err = of_dma_configure(dev, NULL, true); -+ if (err) { -+ dev_err(dev, "Unable to setup DMA: %d\n", err); -+ return err; - } - - err = bcm2835_devm_add_vchi_ctx(dev); - if (err) - return err; - -- err = snd_add_child_devices(dev, numchans); -+ err = snd_add_child_devices(dev, num_channels); - if (err) - return err; - -@@ -453,21 +456,14 @@ static int snd_bcm2835_alsa_resume(struc - - #endif - --static const struct of_device_id snd_bcm2835_of_match_table[] = { -- { .compatible = "brcm,bcm2835-audio",}, -- {}, --}; --MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); -- - static struct platform_driver bcm2835_alsa0_driver = { -- .probe = snd_bcm2835_alsa_probe_dt, -+ .probe = snd_bcm2835_alsa_probe, - #ifdef CONFIG_PM - .suspend = snd_bcm2835_alsa_suspend, - .resume = snd_bcm2835_alsa_resume, - #endif - .driver = { - .name = "bcm2835_audio", -- .of_match_table = snd_bcm2835_of_match_table, - }, - }; - module_platform_driver(bcm2835_alsa0_driver); -@@ -475,3 +471,4 @@ module_platform_driver(bcm2835_alsa0_dri - MODULE_AUTHOR("Dom Cobley"); - MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); - MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:bcm2835_audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0234-staging-bcm2835-camera-Avoid-unneeded-internal-decla.patch b/target/linux/brcm2708/patches-4.19/950-0234-staging-bcm2835-camera-Avoid-unneeded-internal-decla.patch new file mode 100644 index 0000000000..11e6f1fb1a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0234-staging-bcm2835-camera-Avoid-unneeded-internal-decla.patch @@ -0,0 +1,41 @@ +From f658f48d662c5ecd84af235f47cc48636b9a55e2 Mon Sep 17 00:00:00 2001 +From: Nathan Chancellor +Date: Thu, 27 Sep 2018 17:50:39 -0700 +Subject: [PATCH] staging: bcm2835-camera: Avoid unneeded internal + declaration warning + +Clang warns: + +drivers/staging/vc04_services/bcm2835-camera/controls.c:59:18: warning: +variable 'mains_freq_qmenu' is not needed and will not be emitted +[-Wunneeded-internal-declaration] +static const s64 mains_freq_qmenu[] = { + ^ +1 warning generated. + +This is because mains_freq_qmenu is currently only used in an ARRAY_SIZE +macro, which is a compile time evaluation in this case. Avoid this by +adding mains_freq_qmenu as the imenu member of this structure, which +matches all other controls that uses the ARRAY_SIZE macro in v4l2_ctrls. +This turns out to be a no-op because V4L2_CID_MPEG_VIDEO_BITRATE_MODE is +defined as a MMAL_CONTROL_TYPE_STD_MENU, which does not pass the imenu +definition along to v4l2_ctrl_new in bm2835_mmal_init_controls. + +Link: https://github.com/ClangBuiltLinux/linux/issues/122 +Signed-off-by: Nathan Chancellor +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-camera/controls.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -1109,7 +1109,7 @@ static const struct bm2835_mmal_v4l2_ctr + { + V4L2_CID_POWER_LINE_FREQUENCY, MMAL_CONTROL_TYPE_STD_MENU, + 0, ARRAY_SIZE(mains_freq_qmenu) - 1, +- 1, 1, NULL, ++ 1, 1, mains_freq_qmenu, + MMAL_PARAMETER_FLICKER_AVOID, + &ctrl_set_flicker_avoidance, + false diff --git a/target/linux/brcm2708/patches-4.19/950-0235-staging-bcm2835-camera-Add-multiple-inclusion-protec.patch b/target/linux/brcm2708/patches-4.19/950-0235-staging-bcm2835-camera-Add-multiple-inclusion-protec.patch new file mode 100644 index 0000000000..0feb273566 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0235-staging-bcm2835-camera-Add-multiple-inclusion-protec.patch @@ -0,0 +1,48 @@ +From c37e8c9137e4858ed86e211f3fddbb9d9af08532 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 24 Sep 2018 16:21:06 +0100 +Subject: [PATCH] staging: bcm2835-camera: Add multiple inclusion + protection to headers + +mmal-common.h and mmal-msg.h didn't have the normal +ifndef FOO / define FOO / endif protection to stop it being +included multiple times. Add it. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/bcm2835-camera/mmal-common.h | 3 +++ + drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h | 3 +++ + 2 files changed, 6 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h +@@ -13,6 +13,8 @@ + * MMAL structures + * + */ ++#ifndef MMAL_COMMON_H ++#define MMAL_COMMON_H + + #define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) + #define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l') +@@ -56,3 +58,4 @@ struct mmal_colourfx { + u32 u; + u32 v; + }; ++#endif +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h +@@ -23,6 +23,8 @@ + * implementation uses fixed size types and not the enums (though the + * comments have the actual enum type + */ ++#ifndef MMAL_MSG_H ++#define MMAL_MSG_H + + #define VC_MMAL_VER 15 + #define VC_MMAL_MIN_VER 10 +@@ -401,3 +403,4 @@ struct mmal_msg { + u8 payload[MMAL_MSG_MAX_PAYLOAD]; + } u; + }; ++#endif diff --git a/target/linux/brcm2708/patches-4.19/950-0235-staging-bcm2835-camera-Provide-more-specific-probe-e.patch b/target/linux/brcm2708/patches-4.19/950-0235-staging-bcm2835-camera-Provide-more-specific-probe-e.patch deleted file mode 100644 index 678dcc52fd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0235-staging-bcm2835-camera-Provide-more-specific-probe-e.patch +++ /dev/null @@ -1,166 +0,0 @@ -From 94a174095f29c77574548eea17aacaed5c540757 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sun, 21 Oct 2018 18:40:07 +0200 -Subject: [PATCH 235/806] staging: bcm2835-camera: Provide more specific probe - error messages - -Currently there is only a catch-all info message which print the -relevant error code without any context. So add more specific error -messages in order to narrow down possible issues. - -Signed-off-by: Stefan Wahren ---- - .../bcm2835-camera/bcm2835-camera.c | 58 +++++++++++++------ - 1 file changed, 39 insertions(+), 19 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -1552,8 +1552,11 @@ static int mmal_init(struct bm2835_mmal_ - struct vchiq_mmal_component *camera; - - ret = vchiq_mmal_init(&dev->instance); -- if (ret < 0) -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, "%s: vchiq mmal init failed %d\n", -+ __func__, ret); - return ret; -+ } - - /* get the camera component ready */ - ret = vchiq_mmal_component_init(dev->instance, "ril.camera", -@@ -1562,7 +1565,9 @@ static int mmal_init(struct bm2835_mmal_ - goto unreg_mmal; - - camera = dev->component[MMAL_COMPONENT_CAMERA]; -- if (camera->outputs < MMAL_CAMERA_PORT_COUNT) { -+ if (camera->outputs < MMAL_CAMERA_PORT_COUNT) { -+ v4l2_err(&dev->v4l2_dev, "%s: too few camera outputs %d needed %d\n", -+ __func__, camera->outputs, MMAL_CAMERA_PORT_COUNT); - ret = -EINVAL; - goto unreg_camera; - } -@@ -1570,8 +1575,11 @@ static int mmal_init(struct bm2835_mmal_ - ret = set_camera_parameters(dev->instance, - camera, - dev); -- if (ret < 0) -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, "%s: unable to set camera parameters: %d\n", -+ __func__, ret); - goto unreg_camera; -+ } - - /* There was an error in the firmware that meant the camera component - * produced BGR instead of RGB. -@@ -1660,8 +1668,8 @@ static int mmal_init(struct bm2835_mmal_ - - if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) { - ret = -EINVAL; -- pr_debug("too few input ports %d needed %d\n", -- dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1); -+ v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", -+ __func__, dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1); - goto unreg_preview; - } - -@@ -1674,8 +1682,8 @@ static int mmal_init(struct bm2835_mmal_ - - if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) { - ret = -EINVAL; -- v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", -- dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs, -+ v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", -+ __func__, dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs, - 1); - goto unreg_image_encoder; - } -@@ -1689,8 +1697,8 @@ static int mmal_init(struct bm2835_mmal_ - - if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) { - ret = -EINVAL; -- v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", -- dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs, -+ v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", -+ __func__, dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs, - 1); - goto unreg_vid_encoder; - } -@@ -1719,8 +1727,11 @@ static int mmal_init(struct bm2835_mmal_ - sizeof(enable)); - } - ret = bm2835_mmal_set_all_camera_controls(dev); -- if (ret < 0) -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, "%s: failed to set all camera controls: %d\n", -+ __func__, ret); - goto unreg_vid_encoder; -+ } - - return 0; - -@@ -1880,21 +1891,29 @@ static int bcm2835_mmal_probe(struct pla - snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), - "%s", BM2835_MMAL_MODULE_NAME); - ret = v4l2_device_register(NULL, &dev->v4l2_dev); -- if (ret) -+ if (ret) { -+ dev_err(&pdev->dev, "%s: could not register V4L2 device: %d\n", -+ __func__, ret); - goto free_dev; -+ } - - /* setup v4l controls */ - ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler); -- if (ret < 0) -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, "%s: could not init controls: %d\n", -+ __func__, ret); - goto unreg_dev; -+ } - dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler; - - /* mmal init */ - dev->instance = instance; - ret = mmal_init(dev); -- if (ret < 0) -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, "%s: mmal init failed: %d\n", -+ __func__, ret); - goto unreg_dev; -- -+ } - /* initialize queue */ - q = &dev->capture.vb_vidq; - memset(q, 0, sizeof(*q)); -@@ -1912,16 +1931,19 @@ static int bcm2835_mmal_probe(struct pla - - /* initialise video devices */ - ret = bm2835_mmal_init_device(dev, &dev->vdev); -- if (ret < 0) -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, "%s: could not init device: %d\n", -+ __func__, ret); - goto unreg_dev; -+ } - - /* Really want to call vidioc_s_fmt_vid_cap with the default - * format, but currently the APIs don't join up. - */ - ret = mmal_setup_components(dev, &default_v4l2_format); - if (ret < 0) { -- v4l2_err(&dev->v4l2_dev, -- "%s: could not setup components\n", __func__); -+ v4l2_err(&dev->v4l2_dev, "%s: could not setup components: %d\n", -+ __func__, ret); - goto unreg_dev; - } - -@@ -1945,8 +1967,6 @@ cleanup_gdev: - bcm2835_cleanup_instance(gdev[i]); - gdev[i] = NULL; - } -- pr_info("%s: error %d while loading driver\n", -- BM2835_MMAL_MODULE_NAME, ret); - - return ret; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0236-staging-bcm2835-camera-Add-hint-about-possible-fault.patch b/target/linux/brcm2708/patches-4.19/950-0236-staging-bcm2835-camera-Add-hint-about-possible-fault.patch deleted file mode 100644 index 939fe99a0d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0236-staging-bcm2835-camera-Add-hint-about-possible-fault.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 17eaf7c6e8dfcd76b4ed28587b07892e2a5a4ff5 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sun, 21 Oct 2018 19:08:29 +0200 -Subject: [PATCH 236/806] staging: bcm2835-camera: Add hint about possible - faulty GPU mem config - -As per default the GPU memory config of the Raspberry Pi isn't sufficient -for the camera usage. Even worse the bcm2835 camera doesn't provide a -helpful error message in this case. So let's add a hint to point the user -to the likely cause. - -Signed-off-by: Stefan Wahren ---- - drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -@@ -1620,8 +1620,11 @@ int vchiq_mmal_component_init(struct vch - component = &instance->component[instance->component_idx]; - - ret = create_component(instance, component, name); -- if (ret < 0) -+ if (ret < 0) { -+ pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", -+ __func__, ret); - goto unlock; -+ } - - /* ports info needs gathering */ - component->control.type = MMAL_PORT_TYPE_CONTROL; diff --git a/target/linux/brcm2708/patches-4.19/950-0236-staging-bcm2835-camera-Unify-header-inclusion-define.patch b/target/linux/brcm2708/patches-4.19/950-0236-staging-bcm2835-camera-Unify-header-inclusion-define.patch new file mode 100644 index 0000000000..56d62f5d4f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0236-staging-bcm2835-camera-Unify-header-inclusion-define.patch @@ -0,0 +1,30 @@ +From 925b969a16a2e3503803c47a87f093f88d1b2060 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 3 Dec 2018 13:15:20 +0000 +Subject: [PATCH] staging: bcm2835-camera: Unify header inclusion + defines + +Most of the headers use ifndef FOO_H, whilst mmal-parameters.h +used ifndef __FOO_H. + +Revise mmal-parameters.h to drop the underscores and make the +headers all consistent. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/bcm2835-camera/mmal-parameters.h | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h +@@ -19,8 +19,8 @@ + * @{ + */ + +-#ifndef __MMAL_PARAMETERS_H +-#define __MMAL_PARAMETERS_H ++#ifndef MMAL_PARAMETERS_H ++#define MMAL_PARAMETERS_H + + /** Common parameter ID group, used with many types of component. */ + #define MMAL_PARAMETER_GROUP_COMMON (0 << 16) diff --git a/target/linux/brcm2708/patches-4.19/950-0237-staging-bcm2835-Don-t-probe-if-no-camera-is-detected.patch b/target/linux/brcm2708/patches-4.19/950-0237-staging-bcm2835-Don-t-probe-if-no-camera-is-detected.patch deleted file mode 100644 index bd313cc9ff..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0237-staging-bcm2835-Don-t-probe-if-no-camera-is-detected.patch +++ /dev/null @@ -1,41 +0,0 @@ -From b0ebcf556b543b0b509ad071584ca6b41076a2da Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Mon, 22 Oct 2018 11:09:18 +0200 -Subject: [PATCH 237/806] staging: bcm2835: Don't probe if no camera is - detected - -It is a waste of resources to load the camera driver in case there isn't -a camera actually connected to the Raspberry Pi. This solution also -avoids a NULL ptr dereference of mmal instance on driver unload. - -Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.") -Signed-off-by: Stefan Wahren ---- - .../vc04_services/bcm2835-camera/bcm2835-camera.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -1860,6 +1860,12 @@ static int bcm2835_mmal_probe(struct pla - num_cameras = get_num_cameras(instance, - resolutions, - MAX_BCM2835_CAMERAS); -+ -+ if (num_cameras < 1) { -+ ret = -ENODEV; -+ goto cleanup_mmal; -+ } -+ - if (num_cameras > MAX_BCM2835_CAMERAS) - num_cameras = MAX_BCM2835_CAMERAS; - -@@ -1968,6 +1974,9 @@ cleanup_gdev: - gdev[i] = NULL; - } - -+cleanup_mmal: -+ vchiq_mmal_finalise(instance); -+ - return ret; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0237-staging-bcm2835-camera-Fix-alignment-should-match-op.patch b/target/linux/brcm2708/patches-4.19/950-0237-staging-bcm2835-camera-Fix-alignment-should-match-op.patch new file mode 100644 index 0000000000..53fb95d793 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0237-staging-bcm2835-camera-Fix-alignment-should-match-op.patch @@ -0,0 +1,51 @@ +From 11129d36669a3efee5dd0d49f969f11c42764f9d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 29 Oct 2018 15:55:42 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix alignment should match + open parenthesis + +Fix up checkpatch "Alignment should match open parenthesis" errors + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -1934,7 +1934,7 @@ static int bcm2835_mmal_probe(struct pla + ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler); + if (ret < 0) { + v4l2_err(&dev->v4l2_dev, "%s: could not init controls: %d\n", +- __func__, ret); ++ __func__, ret); + goto unreg_dev; + } + dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler; +@@ -1944,7 +1944,7 @@ static int bcm2835_mmal_probe(struct pla + ret = mmal_init(dev); + if (ret < 0) { + v4l2_err(&dev->v4l2_dev, "%s: mmal init failed: %d\n", +- __func__, ret); ++ __func__, ret); + goto unreg_dev; + } + /* initialize queue */ +@@ -1966,7 +1966,7 @@ static int bcm2835_mmal_probe(struct pla + ret = bm2835_mmal_init_device(dev, &dev->vdev); + if (ret < 0) { + v4l2_err(&dev->v4l2_dev, "%s: could not init device: %d\n", +- __func__, ret); ++ __func__, ret); + goto unreg_dev; + } + +@@ -1976,7 +1976,7 @@ static int bcm2835_mmal_probe(struct pla + ret = mmal_setup_components(dev, &default_v4l2_format); + if (ret < 0) { + v4l2_err(&dev->v4l2_dev, "%s: could not setup components: %d\n", +- __func__, ret); ++ __func__, ret); + goto unreg_dev; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0238-staging-bcm2835-camera-Fix-multiple-assignments-shou.patch b/target/linux/brcm2708/patches-4.19/950-0238-staging-bcm2835-camera-Fix-multiple-assignments-shou.patch new file mode 100644 index 0000000000..34bbe82a5d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0238-staging-bcm2835-camera-Fix-multiple-assignments-shou.patch @@ -0,0 +1,30 @@ +From d1f9d21346c642fadb2676077b050106afaf7579 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 29 Oct 2018 15:58:14 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix multiple assignments + should be avoided + +Clear checkpatch complaints of "multiple assignments should be avoided" + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -1065,11 +1065,12 @@ static int mmal_setup_components(struct + /* Make a further decision on port based on resolution */ + if (f->fmt.pix.width <= max_video_width && + f->fmt.pix.height <= max_video_height) +- camera_port = port = ++ camera_port = + &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]; + else +- camera_port = port = ++ camera_port = + &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; ++ port = camera_port; + break; + case COMP_IMAGE_ENCODE: + encode_component = dev->component[COMP_IMAGE_ENCODE]; diff --git a/target/linux/brcm2708/patches-4.19/950-0238-staging-vchiq_arm-Improve-error-handling-on-loading-.patch b/target/linux/brcm2708/patches-4.19/950-0238-staging-vchiq_arm-Improve-error-handling-on-loading-.patch deleted file mode 100644 index 574e550bf2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0238-staging-vchiq_arm-Improve-error-handling-on-loading-.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 73979b06255c3b7b536a53d09ea095aec8ed37aa Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 3 Dec 2018 12:50:38 +0000 -Subject: [PATCH 238/806] staging: vchiq_arm: Improve error handling on loading - drivers - -The handling of loading platform drivers requires checking IS_ERR -for the pointer on unload. -If the driver fails to load, NULL the pointer during probe as -platform_device_unregister already checks for NULL. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 12 ++++++++---- - 1 file changed, 8 insertions(+), 4 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -3655,7 +3655,11 @@ static int vchiq_probe(struct platform_d - MAJOR(vchiq_devid), MINOR(vchiq_devid)); - - bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); -+ if (IS_ERR(bcm2835_camera)) -+ bcm2835_camera = NULL; - bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio"); -+ if (IS_ERR(bcm2835_audio)) -+ bcm2835_audio = NULL; - - return 0; - -@@ -3672,10 +3676,10 @@ failed_platform_init: - - static int vchiq_remove(struct platform_device *pdev) - { -- if (!IS_ERR(bcm2835_audio)) -- platform_device_unregister(bcm2835_audio); -- if (!IS_ERR(bcm2835_camera)) -- platform_device_unregister(bcm2835_camera); -+ platform_device_unregister(bcm2835_codec); -+ platform_device_unregister(bcm2835_audio); -+ platform_device_unregister(bcm2835_camera); -+ platform_device_unregister(vcsm_cma); - vchiq_debugfs_deinit(); - device_destroy(vchiq_class, vchiq_devid); - class_destroy(vchiq_class); diff --git a/target/linux/brcm2708/patches-4.19/950-0239-staging-bcm2835-camera-Do-not-bulk-receive-from-serv.patch b/target/linux/brcm2708/patches-4.19/950-0239-staging-bcm2835-camera-Do-not-bulk-receive-from-serv.patch deleted file mode 100644 index 9bc9da01f9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0239-staging-bcm2835-camera-Do-not-bulk-receive-from-serv.patch +++ /dev/null @@ -1,197 +0,0 @@ -From 522f1499310d389e663a4e8dd0ccbb916b768766 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 14 Feb 2018 17:04:26 +0000 -Subject: [PATCH 239/806] staging: bcm2835-camera: Do not bulk receive from - service thread - -vchi_bulk_queue_receive will queue up to a default of 4 -bulk receives on a connection before blocking. -If called from the VCHI service_callback thread, then -that thread is unable to service the VCHI_CALLBACK_BULK_RECEIVED -events that would enable the queue call to succeed. - -Add a workqueue to schedule the call vchi_bulk_queue_receive -in an alternate context to avoid the lock up. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-camera/mmal-vchiq.c | 101 ++++++++++-------- - 1 file changed, 59 insertions(+), 42 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -@@ -118,8 +118,10 @@ struct mmal_msg_context { - - union { - struct { -- /* work struct for defered callback - must come first */ -+ /* work struct for buffer_cb callback */ - struct work_struct work; -+ /* work struct for deferred callback */ -+ struct work_struct buffer_to_host_work; - /* mmal instance */ - struct vchiq_mmal_instance *instance; - /* mmal port */ -@@ -168,6 +170,9 @@ struct vchiq_mmal_instance { - /* component to use next */ - int component_idx; - struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS]; -+ -+ /* ordered workqueue to process all bulk operations */ -+ struct workqueue_struct *bulk_wq; - }; - - static struct mmal_msg_context * -@@ -251,7 +256,44 @@ static void buffer_work_cb(struct work_s - msg_context->u.bulk.mmal_flags, - msg_context->u.bulk.dts, - msg_context->u.bulk.pts); -+} - -+/* workqueue scheduled callback to handle receiving buffers -+ * -+ * VCHI will allow up to 4 bulk receives to be scheduled before blocking. -+ * If we block in the service_callback context then we can't process the -+ * VCHI_CALLBACK_BULK_RECEIVED message that would otherwise allow the blocked -+ * vchi_bulk_queue_receive() call to complete. -+ */ -+static void buffer_to_host_work_cb(struct work_struct *work) -+{ -+ struct mmal_msg_context *msg_context = -+ container_of(work, struct mmal_msg_context, -+ u.bulk.buffer_to_host_work); -+ struct vchiq_mmal_instance *instance = msg_context->instance; -+ unsigned long len = msg_context->u.bulk.buffer_used; -+ int ret; -+ -+ if (!len) -+ /* Dummy receive to ensure the buffers remain in order */ -+ len = 8; -+ /* queue the bulk submission */ -+ vchi_service_use(instance->handle); -+ ret = vchi_bulk_queue_receive(instance->handle, -+ msg_context->u.bulk.buffer->buffer, -+ /* Actual receive needs to be a multiple -+ * of 4 bytes -+ */ -+ (len + 3) & ~3, -+ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, -+ msg_context); -+ -+ vchi_service_release(instance->handle); -+ -+ if (ret != 0) -+ pr_err("%s: ctx: %p, vchi_bulk_queue_receive failed %d\n", -+ __func__, msg_context, ret); - } - - /* enqueue a bulk receive for a given message context */ -@@ -260,7 +302,6 @@ static int bulk_receive(struct vchiq_mma - struct mmal_msg_context *msg_context) - { - unsigned long rd_len; -- int ret; - - rd_len = msg->u.buffer_from_host.buffer_header.length; - -@@ -294,45 +335,10 @@ static int bulk_receive(struct vchiq_mma - msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; - msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; - -- /* queue the bulk submission */ -- vchi_service_use(instance->handle); -- ret = vchi_bulk_queue_receive(instance->handle, -- msg_context->u.bulk.buffer->buffer, -- /* Actual receive needs to be a multiple -- * of 4 bytes -- */ -- (rd_len + 3) & ~3, -- VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | -- VCHI_FLAGS_BLOCK_UNTIL_QUEUED, -- msg_context); -- -- vchi_service_release(instance->handle); -+ queue_work(msg_context->instance->bulk_wq, -+ &msg_context->u.bulk.buffer_to_host_work); - -- return ret; --} -- --/* enque a dummy bulk receive for a given message context */ --static int dummy_bulk_receive(struct vchiq_mmal_instance *instance, -- struct mmal_msg_context *msg_context) --{ -- int ret; -- -- /* zero length indicates this was a dummy transfer */ -- msg_context->u.bulk.buffer_used = 0; -- -- /* queue the bulk submission */ -- vchi_service_use(instance->handle); -- -- ret = vchi_bulk_queue_receive(instance->handle, -- instance->bulk_scratch, -- 8, -- VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | -- VCHI_FLAGS_BLOCK_UNTIL_QUEUED, -- msg_context); -- -- vchi_service_release(instance->handle); -- -- return ret; -+ return 0; - } - - /* data in message, memcpy from packet into output buffer */ -@@ -380,6 +386,8 @@ buffer_from_host(struct vchiq_mmal_insta - - /* initialise work structure ready to schedule callback */ - INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb); -+ INIT_WORK(&msg_context->u.bulk.buffer_to_host_work, -+ buffer_to_host_work_cb); - - atomic_inc(&port->buffers_with_vpu); - -@@ -465,7 +473,7 @@ static void buffer_to_host_cb(struct vch - if (msg->u.buffer_from_host.buffer_header.flags & - MMAL_BUFFER_HEADER_FLAG_EOS) { - msg_context->u.bulk.status = -- dummy_bulk_receive(instance, msg_context); -+ bulk_receive(instance, msg, msg_context); - if (msg_context->u.bulk.status == 0) - return; /* successful bulk submission, bulk - * completion will trigger callback -@@ -1789,6 +1797,9 @@ int vchiq_mmal_finalise(struct vchiq_mma - - mutex_unlock(&instance->vchiq_mutex); - -+ flush_workqueue(instance->bulk_wq); -+ destroy_workqueue(instance->bulk_wq); -+ - vfree(instance->bulk_scratch); - - idr_destroy(&instance->context_map); -@@ -1858,6 +1869,11 @@ int vchiq_mmal_init(struct vchiq_mmal_in - - params.callback_param = instance; - -+ instance->bulk_wq = alloc_ordered_workqueue("mmal-vchiq", -+ WQ_MEM_RECLAIM); -+ if (!instance->bulk_wq) -+ goto err_free; -+ - status = vchi_service_open(vchi_instance, ¶ms, &instance->handle); - if (status) { - pr_err("Failed to open VCHI service connection (status=%d)\n", -@@ -1872,8 +1888,9 @@ int vchiq_mmal_init(struct vchiq_mmal_in - return 0; - - err_close_services: -- - vchi_service_close(instance->handle); -+ destroy_workqueue(instance->bulk_wq); -+err_free: - vfree(instance->bulk_scratch); - kfree(instance); - return -ENODEV; diff --git a/target/linux/brcm2708/patches-4.19/950-0239-staging-bcm2835-camera-Fix-up-all-formatting-in-mmal.patch b/target/linux/brcm2708/patches-4.19/950-0239-staging-bcm2835-camera-Fix-up-all-formatting-in-mmal.patch new file mode 100644 index 0000000000..254664b0b7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0239-staging-bcm2835-camera-Fix-up-all-formatting-in-mmal.patch @@ -0,0 +1,336 @@ +From be10ef41af683e175521f80b49b99d7ddeac2f2c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 29 Oct 2018 16:08:41 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix up all formatting in + mmal-paramters.h + +Fixes up all checkpatch errors in mmal-parameters.h + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/mmal-parameters.h | 273 +++++++++++------- + 1 file changed, 165 insertions(+), 108 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h ++++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h +@@ -23,148 +23,204 @@ + #define MMAL_PARAMETERS_H + + /** Common parameter ID group, used with many types of component. */ +-#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) ++#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) + /** Camera-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) ++#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) + /** Video-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) ++#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) + /** Audio-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) ++#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) + /** Clock-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) ++#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) + /** Miracast-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) ++#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) + + /* Common parameters */ + enum mmal_parameter_common_type { +- MMAL_PARAMETER_UNUSED /**< Never a valid parameter ID */ +- = MMAL_PARAMETER_GROUP_COMMON, +- MMAL_PARAMETER_SUPPORTED_ENCODINGS, /**< MMAL_PARAMETER_ENCODING_T */ +- MMAL_PARAMETER_URI, /**< MMAL_PARAMETER_URI_T */ ++ /**< Never a valid parameter ID */ ++ MMAL_PARAMETER_UNUSED = MMAL_PARAMETER_GROUP_COMMON, + +- /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ ++ /**< MMAL_PARAMETER_ENCODING_T */ ++ MMAL_PARAMETER_SUPPORTED_ENCODINGS, ++ /**< MMAL_PARAMETER_URI_T */ ++ MMAL_PARAMETER_URI, ++ /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ + MMAL_PARAMETER_CHANGE_EVENT_REQUEST, +- +- /** MMAL_PARAMETER_BOOLEAN_T */ ++ /** MMAL_PARAMETER_BOOLEAN_T */ + MMAL_PARAMETER_ZERO_COPY, +- +- /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ ++ /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ + MMAL_PARAMETER_BUFFER_REQUIREMENTS, +- +- MMAL_PARAMETER_STATISTICS, /**< MMAL_PARAMETER_STATISTICS_T */ +- MMAL_PARAMETER_CORE_STATISTICS, /**< MMAL_PARAMETER_CORE_STATISTICS_T */ +- MMAL_PARAMETER_MEM_USAGE, /**< MMAL_PARAMETER_MEM_USAGE_T */ +- MMAL_PARAMETER_BUFFER_FLAG_FILTER, /**< MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_SEEK, /**< MMAL_PARAMETER_SEEK_T */ +- MMAL_PARAMETER_POWERMON_ENABLE, /**< MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_LOGGING, /**< MMAL_PARAMETER_LOGGING_T */ +- MMAL_PARAMETER_SYSTEM_TIME, /**< MMAL_PARAMETER_UINT64_T */ +- MMAL_PARAMETER_NO_IMAGE_PADDING /**< MMAL_PARAMETER_BOOLEAN_T */ ++ /**< MMAL_PARAMETER_STATISTICS_T */ ++ MMAL_PARAMETER_STATISTICS, ++ /**< MMAL_PARAMETER_CORE_STATISTICS_T */ ++ MMAL_PARAMETER_CORE_STATISTICS, ++ /**< MMAL_PARAMETER_MEM_USAGE_T */ ++ MMAL_PARAMETER_MEM_USAGE, ++ /**< MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_BUFFER_FLAG_FILTER, ++ /**< MMAL_PARAMETER_SEEK_T */ ++ MMAL_PARAMETER_SEEK, ++ /**< MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_POWERMON_ENABLE, ++ /**< MMAL_PARAMETER_LOGGING_T */ ++ MMAL_PARAMETER_LOGGING, ++ /**< MMAL_PARAMETER_UINT64_T */ ++ MMAL_PARAMETER_SYSTEM_TIME, ++ /**< MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_NO_IMAGE_PADDING, + }; + + /* camera parameters */ + + enum mmal_parameter_camera_type { + /* 0 */ +- /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ +- MMAL_PARAMETER_THUMBNAIL_CONFIGURATION +- = MMAL_PARAMETER_GROUP_CAMERA, +- MMAL_PARAMETER_CAPTURE_QUALITY, /**< Unused? */ +- MMAL_PARAMETER_ROTATION, /**< @ref MMAL_PARAMETER_INT32_T */ +- MMAL_PARAMETER_EXIF_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_EXIF, /**< @ref MMAL_PARAMETER_EXIF_T */ +- MMAL_PARAMETER_AWB_MODE, /**< @ref MMAL_PARAM_AWBMODE_T */ +- MMAL_PARAMETER_IMAGE_EFFECT, /**< @ref MMAL_PARAMETER_IMAGEFX_T */ +- MMAL_PARAMETER_COLOUR_EFFECT, /**< @ref MMAL_PARAMETER_COLOURFX_T */ +- MMAL_PARAMETER_FLICKER_AVOID, /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ +- MMAL_PARAMETER_FLASH, /**< @ref MMAL_PARAMETER_FLASH_T */ +- MMAL_PARAMETER_REDEYE, /**< @ref MMAL_PARAMETER_REDEYE_T */ +- MMAL_PARAMETER_FOCUS, /**< @ref MMAL_PARAMETER_FOCUS_T */ +- MMAL_PARAMETER_FOCAL_LENGTHS, /**< Unused? */ +- MMAL_PARAMETER_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ +- MMAL_PARAMETER_ZOOM, /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ +- MMAL_PARAMETER_MIRROR, /**< @ref MMAL_PARAMETER_MIRROR_T */ ++ /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ ++ MMAL_PARAMETER_THUMBNAIL_CONFIGURATION = ++ MMAL_PARAMETER_GROUP_CAMERA, ++ /**< Unused? */ ++ MMAL_PARAMETER_CAPTURE_QUALITY, ++ /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_ROTATION, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_EXIF_DISABLE, ++ /**< @ref MMAL_PARAMETER_EXIF_T */ ++ MMAL_PARAMETER_EXIF, ++ /**< @ref MMAL_PARAM_AWBMODE_T */ ++ MMAL_PARAMETER_AWB_MODE, ++ /**< @ref MMAL_PARAMETER_IMAGEFX_T */ ++ MMAL_PARAMETER_IMAGE_EFFECT, ++ /**< @ref MMAL_PARAMETER_COLOURFX_T */ ++ MMAL_PARAMETER_COLOUR_EFFECT, ++ /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ ++ MMAL_PARAMETER_FLICKER_AVOID, ++ /**< @ref MMAL_PARAMETER_FLASH_T */ ++ MMAL_PARAMETER_FLASH, ++ /**< @ref MMAL_PARAMETER_REDEYE_T */ ++ MMAL_PARAMETER_REDEYE, ++ /**< @ref MMAL_PARAMETER_FOCUS_T */ ++ MMAL_PARAMETER_FOCUS, ++ /**< Unused? */ ++ MMAL_PARAMETER_FOCAL_LENGTHS, ++ /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_EXPOSURE_COMP, ++ /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ ++ MMAL_PARAMETER_ZOOM, ++ /**< @ref MMAL_PARAMETER_MIRROR_T */ ++ MMAL_PARAMETER_MIRROR, + + /* 0x10 */ +- MMAL_PARAMETER_CAMERA_NUM, /**< @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_EXPOSURE_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ +- MMAL_PARAMETER_EXP_METERING_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ +- MMAL_PARAMETER_FOCUS_STATUS, /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ +- MMAL_PARAMETER_CAMERA_CONFIG, /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ +- MMAL_PARAMETER_CAPTURE_STATUS, /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ +- MMAL_PARAMETER_FACE_TRACK, /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ +- MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_JPEG_Q_FACTOR, /**< @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_FRAME_RATE, /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ +- MMAL_PARAMETER_USE_STC, /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ +- MMAL_PARAMETER_CAMERA_INFO, /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ +- MMAL_PARAMETER_VIDEO_STABILISATION, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_FACE_TRACK_RESULTS, /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ +- MMAL_PARAMETER_ENABLE_RAW_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAMERA_NUM, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAPTURE, ++ /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ ++ MMAL_PARAMETER_EXP_METERING_MODE, ++ /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ ++ MMAL_PARAMETER_FOCUS_STATUS, ++ /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ ++ MMAL_PARAMETER_CAMERA_CONFIG, ++ /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ ++ MMAL_PARAMETER_CAPTURE_STATUS, ++ /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ ++ MMAL_PARAMETER_FACE_TRACK, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, ++ /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_JPEG_Q_FACTOR, ++ /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ ++ MMAL_PARAMETER_FRAME_RATE, ++ /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ ++ MMAL_PARAMETER_USE_STC, ++ /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ ++ MMAL_PARAMETER_CAMERA_INFO, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_STABILISATION, ++ /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ ++ MMAL_PARAMETER_FACE_TRACK_RESULTS, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ENABLE_RAW_CAPTURE, + + /* 0x20 */ +- MMAL_PARAMETER_DPF_FILE, /**< @ref MMAL_PARAMETER_URI_T */ +- MMAL_PARAMETER_ENABLE_DPF_FILE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_DPF_FAIL_IS_FATAL, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_CAPTURE_MODE, /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ +- MMAL_PARAMETER_FOCUS_REGIONS, /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ +- MMAL_PARAMETER_INPUT_CROP, /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ +- MMAL_PARAMETER_SENSOR_INFORMATION, /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ +- MMAL_PARAMETER_FLASH_SELECT, /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ +- MMAL_PARAMETER_FIELD_OF_VIEW, /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ +- MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, /**< @ref MMAL_PARAMETER_DRC_T */ +- MMAL_PARAMETER_ALGORITHM_CONTROL, /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ +- MMAL_PARAMETER_SHARPNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ +- MMAL_PARAMETER_CONTRAST, /**< @ref MMAL_PARAMETER_RATIONAL_T */ +- MMAL_PARAMETER_BRIGHTNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ +- MMAL_PARAMETER_SATURATION, /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ /**< @ref MMAL_PARAMETER_URI_T */ ++ MMAL_PARAMETER_DPF_FILE, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ENABLE_DPF_FILE, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_DPF_FAIL_IS_FATAL, ++ /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ ++ MMAL_PARAMETER_CAPTURE_MODE, ++ /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ ++ MMAL_PARAMETER_FOCUS_REGIONS, ++ /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ ++ MMAL_PARAMETER_INPUT_CROP, ++ /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ ++ MMAL_PARAMETER_SENSOR_INFORMATION, ++ /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ ++ MMAL_PARAMETER_FLASH_SELECT, ++ /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ ++ MMAL_PARAMETER_FIELD_OF_VIEW, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, ++ /**< @ref MMAL_PARAMETER_DRC_T */ ++ MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, ++ /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ ++ MMAL_PARAMETER_ALGORITHM_CONTROL, ++ /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_SHARPNESS, ++ /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_CONTRAST, ++ /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_BRIGHTNESS, ++ /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_SATURATION, + + /* 0x30 */ +- MMAL_PARAMETER_ISO, /**< @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_ANTISHAKE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- +- /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ ++ /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_ISO, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ANTISHAKE, ++ /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ + MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ + MMAL_PARAMETER_CAMERA_BURST_CAPTURE, +- +- /** @ref MMAL_PARAMETER_UINT32_T */ ++ /** @ref MMAL_PARAMETER_UINT32_T */ + MMAL_PARAMETER_CAMERA_MIN_ISO, +- +- /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ ++ /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ + MMAL_PARAMETER_CAMERA_USE_CASE, +- +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ + MMAL_PARAMETER_CAPTURE_STATS_PASS, +- +- /** @ref MMAL_PARAMETER_UINT32_T */ ++ /** @ref MMAL_PARAMETER_UINT32_T */ + MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ + MMAL_PARAMETER_ENABLE_REGISTER_FILE, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ + MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL, +- +- /** @ref MMAL_PARAMETER_CONFIGFILE_T */ ++ /** @ref MMAL_PARAMETER_CONFIGFILE_T */ + MMAL_PARAMETER_CONFIGFILE_REGISTERS, +- +- /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ ++ /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ + MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS, +- MMAL_PARAMETER_JPEG_ATTACH_LOG, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_ZERO_SHUTTER_LAG, /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ +- MMAL_PARAMETER_FPS_RANGE, /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ +- MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_JPEG_ATTACH_LOG, ++ /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ ++ MMAL_PARAMETER_ZERO_SHUTTER_LAG, ++ /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ ++ MMAL_PARAMETER_FPS_RANGE, ++ /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, + + /* 0x40 */ +- MMAL_PARAMETER_SW_SHARPEN_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_FLASH_REQUIRED, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_SW_SATURATION_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_SHUTTER_SPEED, /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_CUSTOM_AWB_GAINS, /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_SW_SHARPEN_DISABLE, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_FLASH_REQUIRED, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_SW_SATURATION_DISABLE, ++ /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ ++ MMAL_PARAMETER_CUSTOM_AWB_GAINS, + }; + + struct mmal_parameter_rational { +@@ -411,7 +467,8 @@ enum mmal_parameter_video_type { + MMAL_PARAMETER_MINIMISE_FRAGMENTATION, + + /** @ref MMAL_PARAMETER_UINT32_T. +- * Setting the value to zero resets to the default (one slice per frame). ++ * Setting the value to zero resets to the default (one slice per ++ * frame). + */ + MMAL_PARAMETER_MB_ROWS_PER_SLICE, + diff --git a/target/linux/brcm2708/patches-4.19/950-0240-staging-bcm2835-camera-Ensure-H264-header-bytes-get-.patch b/target/linux/brcm2708/patches-4.19/950-0240-staging-bcm2835-camera-Ensure-H264-header-bytes-get-.patch deleted file mode 100644 index b70a20e8ff..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0240-staging-bcm2835-camera-Ensure-H264-header-bytes-get-.patch +++ /dev/null @@ -1,87 +0,0 @@ -From bf5bbfec3cb99c469eb59f2b19411146c47feb73 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 29 Oct 2018 14:21:04 +0000 -Subject: [PATCH 240/806] staging: bcm2835-camera: Ensure H264 header bytes get - a sensible timestamp - -H264 header come from VC with 0 timestamps, which means they get a -strange timestamp when processed with VC/kernel start times, -particularly if used with the inline header option. -Remember the last frame timestamp and use that if set, or otherwise -use the kernel start time. - -https://github.com/raspberrypi/linux/issues/1836 - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/bcm2835-camera.c | 30 +++++++++++++++++-- - .../bcm2835-camera/bcm2835-camera.h | 2 ++ - 2 files changed, 29 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -363,8 +363,13 @@ static void buffer_cb(struct vchiq_mmal_ - } - } else { - if (dev->capture.frame_count) { -- if (dev->capture.vc_start_timestamp != -1 && -- pts != 0) { -+ if (dev->capture.vc_start_timestamp == -1) { -+ buf->vb.vb2_buf.timestamp = ktime_get_ns(); -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Buffer time set as current time - %lld", -+ buf->vb.vb2_buf.timestamp); -+ -+ } else if (pts != 0) { - ktime_t timestamp; - s64 runtime_us = pts - - dev->capture.vc_start_timestamp; -@@ -377,10 +382,28 @@ static void buffer_cb(struct vchiq_mmal_ - ktime_to_ns(timestamp)); - buf->vb.vb2_buf.timestamp = ktime_to_ns(timestamp); - } else { -- buf->vb.vb2_buf.timestamp = ktime_get_ns(); -+ if (dev->capture.last_timestamp) { -+ buf->vb.vb2_buf.timestamp = -+ dev->capture.last_timestamp; -+ v4l2_dbg(1, bcm2835_v4l2_debug, -+ &dev->v4l2_dev, -+ "Buffer time set as last timestamp - %lld", -+ buf->vb.vb2_buf.timestamp); -+ } else { -+ buf->vb.vb2_buf.timestamp = -+ ktime_to_ns(dev->capture.kernel_start_ts); -+ v4l2_dbg(1, bcm2835_v4l2_debug, -+ &dev->v4l2_dev, -+ "Buffer time set as start timestamp - %lld", -+ buf->vb.vb2_buf.timestamp); -+ } - } -+ dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; - - vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Buffer has ts %llu", -+ dev->capture.last_timestamp); - vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); - - if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && -@@ -546,6 +569,7 @@ static int start_streaming(struct vb2_qu - dev->capture.vc_start_timestamp, parameter_size); - - dev->capture.kernel_start_ts = ktime_get(); -+ dev->capture.last_timestamp = 0; - - /* enable the camera port */ - dev->capture.port->cb_ctx = dev; ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -@@ -90,6 +90,8 @@ struct bm2835_mmal_dev { - s64 vc_start_timestamp; - /* Kernel start timestamp for streaming */ - ktime_t kernel_start_ts; -+ /* Timestamp of last frame */ -+ u64 last_timestamp; - - struct vchiq_mmal_port *port; /* port being used for capture */ - /* camera port being used for capture */ diff --git a/target/linux/brcm2708/patches-4.19/950-0240-staging-bcm2835-camera-Use-enums-for-max-value-in-co.patch b/target/linux/brcm2708/patches-4.19/950-0240-staging-bcm2835-camera-Use-enums-for-max-value-in-co.patch new file mode 100644 index 0000000000..2d3b5408a5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0240-staging-bcm2835-camera-Use-enums-for-max-value-in-co.patch @@ -0,0 +1,112 @@ +From 316725374b7c221f5d43b31ee9cbe738d3df4709 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 28 Sep 2018 10:17:11 +0100 +Subject: [PATCH] staging: bcm2835-camera: Use enums for max value in + controls + +Controls of type MMAL_CONTROL_TYPE_STD_MENU call v4l2_ctrl_new_std_menu +with a max value and a mask. The max value is one of the defined +values for the control, however in the config array there are several +entries where raw numbers have been used instead. Replace these +with the appropriate enum. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-camera/controls.c | 37 +++++++------------ + 1 file changed, 13 insertions(+), 24 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -58,19 +58,6 @@ static const uint32_t iso_values[] = { + 0, 100, 200, 400, 800, + }; + +-static const s64 mains_freq_qmenu[] = { +- V4L2_CID_POWER_LINE_FREQUENCY_DISABLED, +- V4L2_CID_POWER_LINE_FREQUENCY_50HZ, +- V4L2_CID_POWER_LINE_FREQUENCY_60HZ, +- V4L2_CID_POWER_LINE_FREQUENCY_AUTO +-}; +- +-/* Supported video encode modes */ +-static const s64 bitrate_mode_qmenu[] = { +- (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, +- (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, +-}; +- + enum bm2835_mmal_ctrl_type { + MMAL_CONTROL_TYPE_STD, + MMAL_CONTROL_TYPE_STD_MENU, +@@ -966,8 +953,8 @@ static const struct bm2835_mmal_v4l2_ctr + }, + { + V4L2_CID_ISO_SENSITIVITY_AUTO, MMAL_CONTROL_TYPE_STD_MENU, +- 0, 1, V4L2_ISO_SENSITIVITY_AUTO, 1, NULL, +- MMAL_PARAMETER_ISO, ++ 0, V4L2_ISO_SENSITIVITY_AUTO, V4L2_ISO_SENSITIVITY_AUTO, 1, ++ NULL, MMAL_PARAMETER_ISO, + &ctrl_set_iso, + false + }, +@@ -984,8 +971,8 @@ static const struct bm2835_mmal_v4l2_ctr + */ + { + V4L2_CID_EXPOSURE_AUTO, MMAL_CONTROL_TYPE_STD_MENU, +- ~0x03, 3, V4L2_EXPOSURE_AUTO, 0, NULL, +- MMAL_PARAMETER_EXPOSURE_MODE, ++ ~0x03, V4L2_EXPOSURE_APERTURE_PRIORITY, V4L2_EXPOSURE_AUTO, 0, ++ NULL, MMAL_PARAMETER_EXPOSURE_MODE, + &ctrl_set_exposure, + false + }, +@@ -1021,7 +1008,8 @@ static const struct bm2835_mmal_v4l2_ctr + { + V4L2_CID_EXPOSURE_METERING, + MMAL_CONTROL_TYPE_STD_MENU, +- ~0x7, 2, V4L2_EXPOSURE_METERING_AVERAGE, 0, NULL, ++ ~0x7, V4L2_EXPOSURE_METERING_SPOT, ++ V4L2_EXPOSURE_METERING_AVERAGE, 0, NULL, + MMAL_PARAMETER_EXP_METERING_MODE, + &ctrl_set_metering_mode, + false +@@ -1029,7 +1017,8 @@ static const struct bm2835_mmal_v4l2_ctr + { + V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, + MMAL_CONTROL_TYPE_STD_MENU, +- ~0x3ff, 9, V4L2_WHITE_BALANCE_AUTO, 0, NULL, ++ ~0x3ff, V4L2_WHITE_BALANCE_SHADE, V4L2_WHITE_BALANCE_AUTO, 0, ++ NULL, + MMAL_PARAMETER_AWB_MODE, + &ctrl_set_awb_mode, + false +@@ -1050,7 +1039,7 @@ static const struct bm2835_mmal_v4l2_ctr + }, + { + V4L2_CID_COLORFX, MMAL_CONTROL_TYPE_STD_MENU, +- 0, 15, V4L2_COLORFX_NONE, 0, NULL, ++ 0, V4L2_COLORFX_SET_CBCR, V4L2_COLORFX_NONE, 0, NULL, + MMAL_PARAMETER_IMAGE_EFFECT, + &ctrl_set_image_effect, + false +@@ -1085,8 +1074,8 @@ static const struct bm2835_mmal_v4l2_ctr + }, + { + V4L2_CID_MPEG_VIDEO_BITRATE_MODE, MMAL_CONTROL_TYPE_STD_MENU, +- 0, ARRAY_SIZE(bitrate_mode_qmenu) - 1, +- 0, 0, bitrate_mode_qmenu, ++ 0, V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, ++ 0, 0, NULL, + MMAL_PARAMETER_RATECONTROL, + &ctrl_set_bitrate_mode, + false +@@ -1108,8 +1097,8 @@ static const struct bm2835_mmal_v4l2_ctr + }, + { + V4L2_CID_POWER_LINE_FREQUENCY, MMAL_CONTROL_TYPE_STD_MENU, +- 0, ARRAY_SIZE(mains_freq_qmenu) - 1, +- 1, 1, mains_freq_qmenu, ++ 0, V4L2_CID_POWER_LINE_FREQUENCY_AUTO, ++ 1, 1, NULL, + MMAL_PARAMETER_FLICKER_AVOID, + &ctrl_set_flicker_avoidance, + false diff --git a/target/linux/brcm2708/patches-4.19/950-0241-staging-bcm2835-camera-Correct-V4L2_CID_COLORFX_CBCR.patch b/target/linux/brcm2708/patches-4.19/950-0241-staging-bcm2835-camera-Correct-V4L2_CID_COLORFX_CBCR.patch new file mode 100644 index 0000000000..02723056cf --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0241-staging-bcm2835-camera-Correct-V4L2_CID_COLORFX_CBCR.patch @@ -0,0 +1,34 @@ +From f07147faddeb0e99bfe181af78fcda9ea7f06c3d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 8 Oct 2018 18:26:15 +0100 +Subject: [PATCH] staging: bcm2835-camera: Correct + V4L2_CID_COLORFX_CBCR behaviour + +With V4L2_CID_COLORFX_CBCR calling ctrl_set_colfx it was incorrectly +assigning the colour values to the enable field of dev->colourfx +instead of the u and v fields. + +Correct the assignments. + +Reported as a Coverity issue +Detected by CoverityScan CID#1419711 ("Unused value") + +Reported-by: Colin Ian King +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/bcm2835-camera/controls.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -578,8 +578,8 @@ static int ctrl_set_colfx(struct bm2835_ + + control = &dev->component[COMP_CAMERA]->control; + +- dev->colourfx.enable = (ctrl->val & 0xff00) >> 8; +- dev->colourfx.enable = ctrl->val & 0xff; ++ dev->colourfx.u = (ctrl->val & 0xff00) >> 8; ++ dev->colourfx.v = ctrl->val & 0xff; + + ret = vchiq_mmal_port_parameter_set(dev->instance, control, + MMAL_PARAMETER_COLOUR_EFFECT, diff --git a/target/linux/brcm2708/patches-4.19/950-0241-staging-bcm2835-camera-Correctly-denote-key-frames-i.patch b/target/linux/brcm2708/patches-4.19/950-0241-staging-bcm2835-camera-Correctly-denote-key-frames-i.patch deleted file mode 100644 index 4342338c2c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0241-staging-bcm2835-camera-Correctly-denote-key-frames-i.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 6c70a89ac19b1ead96be68002affcd1821014d52 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 13 Feb 2017 13:11:41 +0000 -Subject: [PATCH 241/806] staging: bcm2835-camera: Correctly denote key frames - in encoded data - -Forward MMAL key frame flags to the V4L2 buffers. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -401,6 +401,9 @@ static void buffer_cb(struct vchiq_mmal_ - dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; - - vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); -+ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) -+ buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; -+ - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "Buffer has ts %llu", - dev->capture.last_timestamp); diff --git a/target/linux/brcm2708/patches-4.19/950-0242-staging-bcm2835-camera-Remove-amend-some-obsolete-co.patch b/target/linux/brcm2708/patches-4.19/950-0242-staging-bcm2835-camera-Remove-amend-some-obsolete-co.patch new file mode 100644 index 0000000000..920249e6b4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0242-staging-bcm2835-camera-Remove-amend-some-obsolete-co.patch @@ -0,0 +1,49 @@ +From 37ede4f6a1771b09dea6e8b2fc4d2c5f085a33f3 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 28 Sep 2018 10:22:26 +0100 +Subject: [PATCH] staging: bcm2835-camera: Remove/amend some obsolete + comments + +Remove a todo which has been done. +Remove a template line that was redundant. +Make a comment clearer as to the non-obvious meaning of a field. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/bcm2835-camera/controls.c | 11 +---------- + 1 file changed, 1 insertion(+), 10 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -965,10 +965,6 @@ static const struct bm2835_mmal_v4l2_ctr + &ctrl_set_value, + false + }, +-/* { +- * 0, MMAL_CONTROL_TYPE_CLUSTER, 3, 1, 0, NULL, 0, NULL +- * }, +- */ + { + V4L2_CID_EXPOSURE_AUTO, MMAL_CONTROL_TYPE_STD_MENU, + ~0x03, V4L2_EXPOSURE_APERTURE_PRIORITY, V4L2_EXPOSURE_AUTO, 0, +@@ -976,11 +972,6 @@ static const struct bm2835_mmal_v4l2_ctr + &ctrl_set_exposure, + false + }, +-/* todo this needs mixing in with set exposure +- * { +- * V4L2_CID_SCENE_MODE, MMAL_CONTROL_TYPE_STD_MENU, +- * }, +- */ + { + V4L2_CID_EXPOSURE_ABSOLUTE, MMAL_CONTROL_TYPE_STD, + /* Units of 100usecs */ +@@ -1146,7 +1137,7 @@ static const struct bm2835_mmal_v4l2_ctr + }, + { + V4L2_CID_SCENE_MODE, MMAL_CONTROL_TYPE_STD_MENU, +- -1, /* Min is computed at runtime */ ++ -1, /* Min (mask) is computed at runtime */ + V4L2_SCENE_MODE_TEXT, + V4L2_SCENE_MODE_NONE, 1, NULL, + MMAL_PARAMETER_PROFILE, diff --git a/target/linux/brcm2708/patches-4.19/950-0242-staging-bcm2835-camera-Return-early-on-errors.patch b/target/linux/brcm2708/patches-4.19/950-0242-staging-bcm2835-camera-Return-early-on-errors.patch deleted file mode 100644 index 2fd821b2cc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0242-staging-bcm2835-camera-Return-early-on-errors.patch +++ /dev/null @@ -1,196 +0,0 @@ -From 3cb19cb6b4d6dc86582abef6200c0fc663ae3f2a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 10 Mar 2017 17:27:56 +0000 -Subject: [PATCH 242/806] staging: bcm2835-camera: Return early on errors - -Fix several instances where it is easier to return -early on error conditions than handle it as an else -clause. -As requested by Mauro. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/bcm2835-camera.c | 137 +++++++++--------- - 1 file changed, 71 insertions(+), 66 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -335,7 +335,9 @@ static void buffer_cb(struct vchiq_mmal_ - vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); - } - return; -- } else if (length == 0) { -+ } -+ -+ if (length == 0) { - /* stream ended */ - if (dev->capture.frame_count) { - /* empty buffer whilst capturing - expected to be an -@@ -361,71 +363,72 @@ static void buffer_cb(struct vchiq_mmal_ - vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); - complete(&dev->capture.frame_cmplt); - } -- } else { -- if (dev->capture.frame_count) { -- if (dev->capture.vc_start_timestamp == -1) { -- buf->vb.vb2_buf.timestamp = ktime_get_ns(); -- v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -- "Buffer time set as current time - %lld", -- buf->vb.vb2_buf.timestamp); -- -- } else if (pts != 0) { -- ktime_t timestamp; -- s64 runtime_us = pts - -- dev->capture.vc_start_timestamp; -- timestamp = ktime_add_us(dev->capture.kernel_start_ts, -- runtime_us); -- v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -- "Convert start time %llu and %llu with offset %llu to %llu\n", -- ktime_to_ns(dev->capture.kernel_start_ts), -- dev->capture.vc_start_timestamp, pts, -- ktime_to_ns(timestamp)); -- buf->vb.vb2_buf.timestamp = ktime_to_ns(timestamp); -- } else { -- if (dev->capture.last_timestamp) { -- buf->vb.vb2_buf.timestamp = -- dev->capture.last_timestamp; -- v4l2_dbg(1, bcm2835_v4l2_debug, -- &dev->v4l2_dev, -- "Buffer time set as last timestamp - %lld", -- buf->vb.vb2_buf.timestamp); -- } else { -- buf->vb.vb2_buf.timestamp = -- ktime_to_ns(dev->capture.kernel_start_ts); -- v4l2_dbg(1, bcm2835_v4l2_debug, -- &dev->v4l2_dev, -- "Buffer time set as start timestamp - %lld", -- buf->vb.vb2_buf.timestamp); -- } -- } -- dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; -+ return; -+ } - -- vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); -- if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) -- buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; -+ if (!dev->capture.frame_count) { -+ /* signal frame completion */ -+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); -+ complete(&dev->capture.frame_cmplt); -+ return; -+ } - -+ if (dev->capture.vc_start_timestamp == -1) { -+ /* -+ * VPU doesn't support MMAL_PARAMETER_SYSTEM_TIME, rely on -+ * kernel time, and have no latency compensation. -+ */ -+ buf->vb.vb2_buf.timestamp = ktime_get_ns(); -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Buffer time set as current time - %lld", -+ buf->vb.vb2_buf.timestamp); -+ } else if (pts != 0) { -+ ktime_t timestamp; -+ s64 runtime_us = pts - -+ dev->capture.vc_start_timestamp; -+ timestamp = ktime_add_us(dev->capture.kernel_start_ts, -+ runtime_us); -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Convert start time %llu and %llu with offset %llu to %llu\n", -+ ktime_to_ns(dev->capture.kernel_start_ts), -+ dev->capture.vc_start_timestamp, pts, -+ ktime_to_ns(timestamp)); -+ buf->vb.vb2_buf.timestamp = ktime_to_ns(timestamp); -+ } else { -+ if (dev->capture.last_timestamp) { -+ buf->vb.vb2_buf.timestamp = dev->capture.last_timestamp; - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -- "Buffer has ts %llu", -- dev->capture.last_timestamp); -- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); -- -- if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && -- is_capturing(dev)) { -- v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -- "Grab another frame as buffer has EOS"); -- vchiq_mmal_port_parameter_set( -- instance, -- dev->capture.camera_port, -- MMAL_PARAMETER_CAPTURE, -- &dev->capture.frame_count, -- sizeof(dev->capture.frame_count)); -- } -+ "Buffer time set as last timestamp - %lld", -+ buf->vb.vb2_buf.timestamp); - } else { -- /* signal frame completion */ -- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); -- complete(&dev->capture.frame_cmplt); -+ buf->vb.vb2_buf.timestamp = -+ ktime_to_ns(dev->capture.kernel_start_ts); -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Buffer time set as start timestamp - %lld", -+ buf->vb.vb2_buf.timestamp); - } - } -+ dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; -+ -+ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); -+ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) -+ buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Buffer has ts %llu", -+ dev->capture.last_timestamp); -+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); -+ -+ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && -+ is_capturing(dev)) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Grab another frame as buffer has EOS"); -+ vchiq_mmal_port_parameter_set(instance, -+ dev->capture.camera_port, -+ MMAL_PARAMETER_CAPTURE, -+ &dev->capture.frame_count, -+ sizeof(dev->capture.frame_count)); -+ } - } - - static int enable_camera(struct bm2835_mmal_dev *dev) -@@ -815,27 +818,29 @@ static int vidioc_overlay(struct file *f - - ret = vchiq_mmal_port_set_format(dev->instance, src); - if (ret < 0) -- goto error; -+ return ret; - - ret = set_overlay_params(dev, dst); - if (ret < 0) -- goto error; -+ return ret; - -- if (enable_camera(dev) < 0) -- goto error; -+ if (enable_camera(dev) < 0) { -+ ret = -EINVAL; -+ return ret; -+ } - - ret = vchiq_mmal_component_enable( - dev->instance, - dev->component[MMAL_COMPONENT_PREVIEW]); - if (ret < 0) -- goto error; -+ return ret; - - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "connecting %p to %p\n", - src, dst); - ret = vchiq_mmal_port_connect_tunnel(dev->instance, src, dst); - if (!ret) - ret = vchiq_mmal_port_enable(dev->instance, src, NULL); --error: -+ - return ret; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0243-staging-bcm2835-camera-Remove-dead-email-addresses.patch b/target/linux/brcm2708/patches-4.19/950-0243-staging-bcm2835-camera-Remove-dead-email-addresses.patch deleted file mode 100644 index da9f4b33db..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0243-staging-bcm2835-camera-Remove-dead-email-addresses.patch +++ /dev/null @@ -1,241 +0,0 @@ -From b1d4e377b4a8c73396d50c45106f3d3a710b11f5 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 10 Mar 2017 17:35:38 +0000 -Subject: [PATCH 243/806] staging: bcm2835-camera: Remove dead email addresses - -None of the listed author email addresses were valid. -Keep list of authors and the companies they represented. -Update my email address. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-camera/bcm2835-camera.c | 9 +++++---- - .../vc04_services/bcm2835-camera/bcm2835-camera.h | 9 +++++---- - drivers/staging/vc04_services/bcm2835-camera/controls.c | 9 +++++---- - .../staging/vc04_services/bcm2835-camera/mmal-common.h | 9 +++++---- - .../vc04_services/bcm2835-camera/mmal-encodings.h | 9 +++++---- - .../vc04_services/bcm2835-camera/mmal-msg-common.h | 9 +++++---- - .../vc04_services/bcm2835-camera/mmal-msg-format.h | 9 +++++---- - .../staging/vc04_services/bcm2835-camera/mmal-msg-port.h | 9 +++++---- - drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h | 9 +++++---- - .../vc04_services/bcm2835-camera/mmal-parameters.h | 9 +++++---- - .../staging/vc04_services/bcm2835-camera/mmal-vchiq.c | 9 +++++---- - .../staging/vc04_services/bcm2835-camera/mmal-vchiq.h | 9 +++++---- - 12 files changed, 60 insertions(+), 48 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - */ - - #include ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - * - * core driver device - */ ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - */ - - #include ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - * - * MMAL structures - * ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-encodings.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-encodings.h -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - */ - #ifndef MMAL_ENCODINGS_H - #define MMAL_ENCODINGS_H ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-common.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-common.h -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - */ - - #ifndef MMAL_MSG_COMMON_H ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - */ - - #ifndef MMAL_MSG_FORMAT_H ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - */ - - /* MMAL_PORT_TYPE_T */ ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - */ - - /* all the data structures which serialise the MMAL protocol. note ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - */ - - /* common parameters */ ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - * - * V4L2 driver MMAL vchiq interface code - */ ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h -@@ -4,10 +4,11 @@ - * - * Copyright © 2013 Raspberry Pi (Trading) Ltd. - * -- * Authors: Vincent Sanders -- * Dave Stevenson -- * Simon Mellor -- * Luke Diamand -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom - * - * MMAL interface to VCHIQ message passing - */ diff --git a/target/linux/brcm2708/patches-4.19/950-0243-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch b/target/linux/brcm2708/patches-4.19/950-0243-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch new file mode 100644 index 0000000000..1cd23da288 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0243-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch @@ -0,0 +1,7535 @@ +From e7723c6bcf31a440b8762e9e22497ff3fbbb7056 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 24 Sep 2018 16:30:37 +0100 +Subject: [PATCH] staging: vc04_services: Split vchiq-mmal into a + module + +In preparation for adding a video codec V4L2 module which also +wants to use vchiq-mmal functions, split it out into an +independent module. +The minimum number of changes have been made to achieve this +(eg straight moves where possible) so existing checkpatch +errors will still be present. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/Kconfig | 1 + + drivers/staging/vc04_services/Makefile | 1 + + .../vc04_services/bcm2835-camera/Kconfig | 2 +- + .../vc04_services/bcm2835-camera/Makefile | 4 ++-- + .../staging/vc04_services/vchiq-mmal/Kconfig | 7 ++++++ + .../staging/vc04_services/vchiq-mmal/Makefile | 8 +++++++ + .../mmal-common.h | 0 + .../mmal-encodings.h | 0 + .../mmal-msg-common.h | 0 + .../mmal-msg-format.h | 0 + .../mmal-msg-port.h | 0 + .../{bcm2835-camera => vchiq-mmal}/mmal-msg.h | 0 + .../mmal-parameters.h | 0 + .../mmal-vchiq.c | 22 +++++++++++++++++++ + .../mmal-vchiq.h | 0 + 15 files changed, 42 insertions(+), 3 deletions(-) + create mode 100644 drivers/staging/vc04_services/vchiq-mmal/Kconfig + create mode 100644 drivers/staging/vc04_services/vchiq-mmal/Makefile + rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-common.h (100%) + rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-encodings.h (100%) + rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-msg-common.h (100%) + rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-msg-format.h (100%) + rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-msg-port.h (100%) + rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-msg.h (100%) + rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-parameters.h (100%) + rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-vchiq.c (98%) + rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-vchiq.h (100%) + +--- a/drivers/staging/vc04_services/Kconfig ++++ b/drivers/staging/vc04_services/Kconfig +@@ -21,6 +21,7 @@ config BCM2835_VCHIQ + source "drivers/staging/vc04_services/bcm2835-audio/Kconfig" + + source "drivers/staging/vc04_services/bcm2835-camera/Kconfig" ++source "drivers/staging/vc04_services/vchiq-mmal/Kconfig" + + endif + +--- a/drivers/staging/vc04_services/Makefile ++++ b/drivers/staging/vc04_services/Makefile +@@ -12,6 +12,7 @@ vchiq-objs := \ + + obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/ + obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-camera/ ++obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += vchiq-mmal/ + + ccflags-y += -Idrivers/staging/vc04_services -D__VCCOREVER__=0x04000000 + +--- a/drivers/staging/vc04_services/bcm2835-camera/Kconfig ++++ b/drivers/staging/vc04_services/bcm2835-camera/Kconfig +@@ -2,7 +2,7 @@ config VIDEO_BCM2835 + tristate "BCM2835 Camera" + depends on MEDIA_SUPPORT + depends on VIDEO_V4L2 && (ARCH_BCM2835 || COMPILE_TEST) +- select BCM2835_VCHIQ ++ select BCM2835_VCHIQ_MMAL + select VIDEOBUF2_VMALLOC + select BTREE + help +--- a/drivers/staging/vc04_services/bcm2835-camera/Makefile ++++ b/drivers/staging/vc04_services/bcm2835-camera/Makefile +@@ -1,11 +1,11 @@ + # SPDX-License-Identifier: GPL-2.0 + bcm2835-v4l2-$(CONFIG_VIDEO_BCM2835) := \ + bcm2835-camera.o \ +- controls.o \ +- mmal-vchiq.o ++ controls.o + + obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-v4l2.o + + ccflags-y += \ + -Idrivers/staging/vc04_services \ ++ -Idrivers/staging/vc04_services/vchiq-mmal \ + -D__VCCOREVER__=0x04000000 +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/Kconfig +@@ -0,0 +1,7 @@ ++config BCM2835_VCHIQ_MMAL ++ tristate "BCM2835 MMAL VCHIQ service" ++ depends on (ARCH_BCM2835 || COMPILE_TEST) ++ select BCM2835_VCHIQ ++ help ++ Enables the MMAL API over VCHIQ as used for the ++ majority of the multimedia services on VideoCore. +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/Makefile +@@ -0,0 +1,8 @@ ++# SPDX-License-Identifier: GPL-2.0 ++bcm2835-mmal-vchiq-objs := mmal-vchiq.o ++ ++obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += bcm2835-mmal-vchiq.o ++ ++ccflags-y += \ ++ -Idrivers/staging/vc04_services \ ++ -D__VCCOREVER__=0x04000000 +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c ++++ /dev/null +@@ -1,1899 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0 +-/* +- * Broadcom BM2835 V4L2 driver +- * +- * Copyright © 2013 Raspberry Pi (Trading) Ltd. +- * +- * Authors: Vincent Sanders @ Collabora +- * Dave Stevenson @ Broadcom +- * (now dave.stevenson@raspberrypi.org) +- * Simon Mellor @ Broadcom +- * Luke Diamand @ Broadcom +- * +- * V4L2 driver MMAL vchiq interface code +- */ +- +-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +- +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +- +-#include "mmal-common.h" +-#include "mmal-vchiq.h" +-#include "mmal-msg.h" +- +-#define USE_VCHIQ_ARM +-#include "interface/vchi/vchi.h" +- +-/* maximum number of components supported */ +-#define VCHIQ_MMAL_MAX_COMPONENTS 4 +- +-/*#define FULL_MSG_DUMP 1*/ +- +-#ifdef DEBUG +-static const char *const msg_type_names[] = { +- "UNKNOWN", +- "QUIT", +- "SERVICE_CLOSED", +- "GET_VERSION", +- "COMPONENT_CREATE", +- "COMPONENT_DESTROY", +- "COMPONENT_ENABLE", +- "COMPONENT_DISABLE", +- "PORT_INFO_GET", +- "PORT_INFO_SET", +- "PORT_ACTION", +- "BUFFER_FROM_HOST", +- "BUFFER_TO_HOST", +- "GET_STATS", +- "PORT_PARAMETER_SET", +- "PORT_PARAMETER_GET", +- "EVENT_TO_HOST", +- "GET_CORE_STATS_FOR_PORT", +- "OPAQUE_ALLOCATOR", +- "CONSUME_MEM", +- "LMK", +- "OPAQUE_ALLOCATOR_DESC", +- "DRM_GET_LHS32", +- "DRM_GET_TIME", +- "BUFFER_FROM_HOST_ZEROLEN", +- "PORT_FLUSH", +- "HOST_LOG", +-}; +-#endif +- +-static const char *const port_action_type_names[] = { +- "UNKNOWN", +- "ENABLE", +- "DISABLE", +- "FLUSH", +- "CONNECT", +- "DISCONNECT", +- "SET_REQUIREMENTS", +-}; +- +-#if defined(DEBUG) +-#if defined(FULL_MSG_DUMP) +-#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) \ +- do { \ +- pr_debug(TITLE" type:%s(%d) length:%d\n", \ +- msg_type_names[(MSG)->h.type], \ +- (MSG)->h.type, (MSG_LEN)); \ +- print_hex_dump(KERN_DEBUG, "<h.type], \ +- (MSG)->h.type, (MSG_LEN)); \ +- } +-#endif +-#else +-#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) +-#endif +- +-struct vchiq_mmal_instance; +- +-/* normal message context */ +-struct mmal_msg_context { +- struct vchiq_mmal_instance *instance; +- +- /* Index in the context_map idr so that we can find the +- * mmal_msg_context again when servicing the VCHI reply. +- */ +- int handle; +- +- union { +- struct { +- /* work struct for buffer_cb callback */ +- struct work_struct work; +- /* work struct for deferred callback */ +- struct work_struct buffer_to_host_work; +- /* mmal instance */ +- struct vchiq_mmal_instance *instance; +- /* mmal port */ +- struct vchiq_mmal_port *port; +- /* actual buffer used to store bulk reply */ +- struct mmal_buffer *buffer; +- /* amount of buffer used */ +- unsigned long buffer_used; +- /* MMAL buffer flags */ +- u32 mmal_flags; +- /* Presentation and Decode timestamps */ +- s64 pts; +- s64 dts; +- +- int status; /* context status */ +- +- } bulk; /* bulk data */ +- +- struct { +- /* message handle to release */ +- VCHI_HELD_MSG_T msg_handle; +- /* pointer to received message */ +- struct mmal_msg *msg; +- /* received message length */ +- u32 msg_len; +- /* completion upon reply */ +- struct completion cmplt; +- } sync; /* synchronous response */ +- } u; +- +-}; +- +-struct vchiq_mmal_instance { +- VCHI_SERVICE_HANDLE_T handle; +- +- /* ensure serialised access to service */ +- struct mutex vchiq_mutex; +- +- /* vmalloc page to receive scratch bulk xfers into */ +- void *bulk_scratch; +- +- struct idr context_map; +- /* protect accesses to context_map */ +- struct mutex context_map_lock; +- +- /* component to use next */ +- int component_idx; +- struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS]; +- +- /* ordered workqueue to process all bulk operations */ +- struct workqueue_struct *bulk_wq; +-}; +- +-static struct mmal_msg_context * +-get_msg_context(struct vchiq_mmal_instance *instance) +-{ +- struct mmal_msg_context *msg_context; +- int handle; +- +- /* todo: should this be allocated from a pool to avoid kzalloc */ +- msg_context = kzalloc(sizeof(*msg_context), GFP_KERNEL); +- +- if (!msg_context) +- return ERR_PTR(-ENOMEM); +- +- /* Create an ID that will be passed along with our message so +- * that when we service the VCHI reply, we can look up what +- * message is being replied to. +- */ +- mutex_lock(&instance->context_map_lock); +- handle = idr_alloc(&instance->context_map, msg_context, +- 0, 0, GFP_KERNEL); +- mutex_unlock(&instance->context_map_lock); +- +- if (handle < 0) { +- kfree(msg_context); +- return ERR_PTR(handle); +- } +- +- msg_context->instance = instance; +- msg_context->handle = handle; +- +- return msg_context; +-} +- +-static struct mmal_msg_context * +-lookup_msg_context(struct vchiq_mmal_instance *instance, int handle) +-{ +- return idr_find(&instance->context_map, handle); +-} +- +-static void +-release_msg_context(struct mmal_msg_context *msg_context) +-{ +- struct vchiq_mmal_instance *instance = msg_context->instance; +- +- mutex_lock(&instance->context_map_lock); +- idr_remove(&instance->context_map, msg_context->handle); +- mutex_unlock(&instance->context_map_lock); +- kfree(msg_context); +-} +- +-/* deals with receipt of event to host message */ +-static void event_to_host_cb(struct vchiq_mmal_instance *instance, +- struct mmal_msg *msg, u32 msg_len) +-{ +- pr_debug("unhandled event\n"); +- pr_debug("component:%u port type:%d num:%d cmd:0x%x length:%d\n", +- msg->u.event_to_host.client_component, +- msg->u.event_to_host.port_type, +- msg->u.event_to_host.port_num, +- msg->u.event_to_host.cmd, msg->u.event_to_host.length); +-} +- +-/* workqueue scheduled callback +- * +- * we do this because it is important we do not call any other vchiq +- * sync calls from witin the message delivery thread +- */ +-static void buffer_work_cb(struct work_struct *work) +-{ +- struct mmal_msg_context *msg_context = +- container_of(work, struct mmal_msg_context, u.bulk.work); +- +- atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); +- +- msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, +- msg_context->u.bulk.port, +- msg_context->u.bulk.status, +- msg_context->u.bulk.buffer, +- msg_context->u.bulk.buffer_used, +- msg_context->u.bulk.mmal_flags, +- msg_context->u.bulk.dts, +- msg_context->u.bulk.pts); +-} +- +-/* workqueue scheduled callback to handle receiving buffers +- * +- * VCHI will allow up to 4 bulk receives to be scheduled before blocking. +- * If we block in the service_callback context then we can't process the +- * VCHI_CALLBACK_BULK_RECEIVED message that would otherwise allow the blocked +- * vchi_bulk_queue_receive() call to complete. +- */ +-static void buffer_to_host_work_cb(struct work_struct *work) +-{ +- struct mmal_msg_context *msg_context = +- container_of(work, struct mmal_msg_context, +- u.bulk.buffer_to_host_work); +- struct vchiq_mmal_instance *instance = msg_context->instance; +- unsigned long len = msg_context->u.bulk.buffer_used; +- int ret; +- +- if (!len) +- /* Dummy receive to ensure the buffers remain in order */ +- len = 8; +- /* queue the bulk submission */ +- vchi_service_use(instance->handle); +- ret = vchi_bulk_queue_receive(instance->handle, +- msg_context->u.bulk.buffer->buffer, +- /* Actual receive needs to be a multiple +- * of 4 bytes +- */ +- (len + 3) & ~3, +- VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | +- VCHI_FLAGS_BLOCK_UNTIL_QUEUED, +- msg_context); +- +- vchi_service_release(instance->handle); +- +- if (ret != 0) +- pr_err("%s: ctx: %p, vchi_bulk_queue_receive failed %d\n", +- __func__, msg_context, ret); +-} +- +-/* enqueue a bulk receive for a given message context */ +-static int bulk_receive(struct vchiq_mmal_instance *instance, +- struct mmal_msg *msg, +- struct mmal_msg_context *msg_context) +-{ +- unsigned long rd_len; +- +- rd_len = msg->u.buffer_from_host.buffer_header.length; +- +- if (!msg_context->u.bulk.buffer) { +- pr_err("bulk.buffer not configured - error in buffer_from_host\n"); +- +- /* todo: this is a serious error, we should never have +- * committed a buffer_to_host operation to the mmal +- * port without the buffer to back it up (underflow +- * handling) and there is no obvious way to deal with +- * this - how is the mmal servie going to react when +- * we fail to do the xfer and reschedule a buffer when +- * it arrives? perhaps a starved flag to indicate a +- * waiting bulk receive? +- */ +- +- return -EINVAL; +- } +- +- /* ensure we do not overrun the available buffer */ +- if (rd_len > msg_context->u.bulk.buffer->buffer_size) { +- rd_len = msg_context->u.bulk.buffer->buffer_size; +- pr_warn("short read as not enough receive buffer space\n"); +- /* todo: is this the correct response, what happens to +- * the rest of the message data? +- */ +- } +- +- /* store length */ +- msg_context->u.bulk.buffer_used = rd_len; +- msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; +- msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; +- +- queue_work(msg_context->instance->bulk_wq, +- &msg_context->u.bulk.buffer_to_host_work); +- +- return 0; +-} +- +-/* data in message, memcpy from packet into output buffer */ +-static int inline_receive(struct vchiq_mmal_instance *instance, +- struct mmal_msg *msg, +- struct mmal_msg_context *msg_context) +-{ +- memcpy(msg_context->u.bulk.buffer->buffer, +- msg->u.buffer_from_host.short_data, +- msg->u.buffer_from_host.payload_in_message); +- +- msg_context->u.bulk.buffer_used = +- msg->u.buffer_from_host.payload_in_message; +- +- return 0; +-} +- +-/* queue the buffer availability with MMAL_MSG_TYPE_BUFFER_FROM_HOST */ +-static int +-buffer_from_host(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, struct mmal_buffer *buf) +-{ +- struct mmal_msg_context *msg_context; +- struct mmal_msg m; +- int ret; +- +- if (!port->enabled) +- return -EINVAL; +- +- pr_debug("instance:%p buffer:%p\n", instance->handle, buf); +- +- /* get context */ +- if (!buf->msg_context) { +- pr_err("%s: msg_context not allocated, buf %p\n", __func__, +- buf); +- return -EINVAL; +- } +- msg_context = buf->msg_context; +- +- /* store bulk message context for when data arrives */ +- msg_context->u.bulk.instance = instance; +- msg_context->u.bulk.port = port; +- msg_context->u.bulk.buffer = buf; +- msg_context->u.bulk.buffer_used = 0; +- +- /* initialise work structure ready to schedule callback */ +- INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb); +- INIT_WORK(&msg_context->u.bulk.buffer_to_host_work, +- buffer_to_host_work_cb); +- +- atomic_inc(&port->buffers_with_vpu); +- +- /* prep the buffer from host message */ +- memset(&m, 0xbc, sizeof(m)); /* just to make debug clearer */ +- +- m.h.type = MMAL_MSG_TYPE_BUFFER_FROM_HOST; +- m.h.magic = MMAL_MAGIC; +- m.h.context = msg_context->handle; +- m.h.status = 0; +- +- /* drvbuf is our private data passed back */ +- m.u.buffer_from_host.drvbuf.magic = MMAL_MAGIC; +- m.u.buffer_from_host.drvbuf.component_handle = port->component->handle; +- m.u.buffer_from_host.drvbuf.port_handle = port->handle; +- m.u.buffer_from_host.drvbuf.client_context = msg_context->handle; +- +- /* buffer header */ +- m.u.buffer_from_host.buffer_header.cmd = 0; +- m.u.buffer_from_host.buffer_header.data = +- (u32)(unsigned long)buf->buffer; +- m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; +- m.u.buffer_from_host.buffer_header.length = 0; /* nothing used yet */ +- m.u.buffer_from_host.buffer_header.offset = 0; /* no offset */ +- m.u.buffer_from_host.buffer_header.flags = 0; /* no flags */ +- m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; +- m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; +- +- /* clear buffer type sepecific data */ +- memset(&m.u.buffer_from_host.buffer_header_type_specific, 0, +- sizeof(m.u.buffer_from_host.buffer_header_type_specific)); +- +- /* no payload in message */ +- m.u.buffer_from_host.payload_in_message = 0; +- +- vchi_service_use(instance->handle); +- +- ret = vchi_queue_kernel_message(instance->handle, +- &m, +- sizeof(struct mmal_msg_header) + +- sizeof(m.u.buffer_from_host)); +- +- vchi_service_release(instance->handle); +- +- return ret; +-} +- +-/* deals with receipt of buffer to host message */ +-static void buffer_to_host_cb(struct vchiq_mmal_instance *instance, +- struct mmal_msg *msg, u32 msg_len) +-{ +- struct mmal_msg_context *msg_context; +- u32 handle; +- +- pr_debug("%s: instance:%p msg:%p msg_len:%d\n", +- __func__, instance, msg, msg_len); +- +- if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) { +- handle = msg->u.buffer_from_host.drvbuf.client_context; +- msg_context = lookup_msg_context(instance, handle); +- +- if (!msg_context) { +- pr_err("drvbuf.client_context(%u) is invalid\n", +- handle); +- return; +- } +- } else { +- pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n"); +- return; +- } +- +- msg_context->u.bulk.mmal_flags = +- msg->u.buffer_from_host.buffer_header.flags; +- +- if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) { +- /* message reception had an error */ +- pr_warn("error %d in reply\n", msg->h.status); +- +- msg_context->u.bulk.status = msg->h.status; +- +- } else if (msg->u.buffer_from_host.buffer_header.length == 0) { +- /* empty buffer */ +- if (msg->u.buffer_from_host.buffer_header.flags & +- MMAL_BUFFER_HEADER_FLAG_EOS) { +- msg_context->u.bulk.status = +- bulk_receive(instance, msg, msg_context); +- if (msg_context->u.bulk.status == 0) +- return; /* successful bulk submission, bulk +- * completion will trigger callback +- */ +- } else { +- /* do callback with empty buffer - not EOS though */ +- msg_context->u.bulk.status = 0; +- msg_context->u.bulk.buffer_used = 0; +- } +- } else if (msg->u.buffer_from_host.payload_in_message == 0) { +- /* data is not in message, queue a bulk receive */ +- msg_context->u.bulk.status = +- bulk_receive(instance, msg, msg_context); +- if (msg_context->u.bulk.status == 0) +- return; /* successful bulk submission, bulk +- * completion will trigger callback +- */ +- +- /* failed to submit buffer, this will end badly */ +- pr_err("error %d on bulk submission\n", +- msg_context->u.bulk.status); +- +- } else if (msg->u.buffer_from_host.payload_in_message <= +- MMAL_VC_SHORT_DATA) { +- /* data payload within message */ +- msg_context->u.bulk.status = inline_receive(instance, msg, +- msg_context); +- } else { +- pr_err("message with invalid short payload\n"); +- +- /* signal error */ +- msg_context->u.bulk.status = -EINVAL; +- msg_context->u.bulk.buffer_used = +- msg->u.buffer_from_host.payload_in_message; +- } +- +- /* schedule the port callback */ +- schedule_work(&msg_context->u.bulk.work); +-} +- +-static void bulk_receive_cb(struct vchiq_mmal_instance *instance, +- struct mmal_msg_context *msg_context) +-{ +- msg_context->u.bulk.status = 0; +- +- /* schedule the port callback */ +- schedule_work(&msg_context->u.bulk.work); +-} +- +-static void bulk_abort_cb(struct vchiq_mmal_instance *instance, +- struct mmal_msg_context *msg_context) +-{ +- pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context); +- +- msg_context->u.bulk.status = -EINTR; +- +- schedule_work(&msg_context->u.bulk.work); +-} +- +-/* incoming event service callback */ +-static void service_callback(void *param, +- const VCHI_CALLBACK_REASON_T reason, +- void *bulk_ctx) +-{ +- struct vchiq_mmal_instance *instance = param; +- int status; +- u32 msg_len; +- struct mmal_msg *msg; +- VCHI_HELD_MSG_T msg_handle; +- struct mmal_msg_context *msg_context; +- +- if (!instance) { +- pr_err("Message callback passed NULL instance\n"); +- return; +- } +- +- switch (reason) { +- case VCHI_CALLBACK_MSG_AVAILABLE: +- status = vchi_msg_hold(instance->handle, (void **)&msg, +- &msg_len, VCHI_FLAGS_NONE, &msg_handle); +- if (status) { +- pr_err("Unable to dequeue a message (%d)\n", status); +- break; +- } +- +- DBG_DUMP_MSG(msg, msg_len, "<<< reply message"); +- +- /* handling is different for buffer messages */ +- switch (msg->h.type) { +- case MMAL_MSG_TYPE_BUFFER_FROM_HOST: +- vchi_held_msg_release(&msg_handle); +- break; +- +- case MMAL_MSG_TYPE_EVENT_TO_HOST: +- event_to_host_cb(instance, msg, msg_len); +- vchi_held_msg_release(&msg_handle); +- +- break; +- +- case MMAL_MSG_TYPE_BUFFER_TO_HOST: +- buffer_to_host_cb(instance, msg, msg_len); +- vchi_held_msg_release(&msg_handle); +- break; +- +- default: +- /* messages dependent on header context to complete */ +- if (!msg->h.context) { +- pr_err("received message context was null!\n"); +- vchi_held_msg_release(&msg_handle); +- break; +- } +- +- msg_context = lookup_msg_context(instance, +- msg->h.context); +- if (!msg_context) { +- pr_err("received invalid message context %u!\n", +- msg->h.context); +- vchi_held_msg_release(&msg_handle); +- break; +- } +- +- /* fill in context values */ +- msg_context->u.sync.msg_handle = msg_handle; +- msg_context->u.sync.msg = msg; +- msg_context->u.sync.msg_len = msg_len; +- +- /* todo: should this check (completion_done() +- * == 1) for no one waiting? or do we need a +- * flag to tell us the completion has been +- * interrupted so we can free the message and +- * its context. This probably also solves the +- * message arriving after interruption todo +- * below +- */ +- +- /* complete message so caller knows it happened */ +- complete(&msg_context->u.sync.cmplt); +- break; +- } +- +- break; +- +- case VCHI_CALLBACK_BULK_RECEIVED: +- bulk_receive_cb(instance, bulk_ctx); +- break; +- +- case VCHI_CALLBACK_BULK_RECEIVE_ABORTED: +- bulk_abort_cb(instance, bulk_ctx); +- break; +- +- case VCHI_CALLBACK_SERVICE_CLOSED: +- /* TODO: consider if this requires action if received when +- * driver is not explicitly closing the service +- */ +- break; +- +- default: +- pr_err("Received unhandled message reason %d\n", reason); +- break; +- } +-} +- +-static int send_synchronous_mmal_msg(struct vchiq_mmal_instance *instance, +- struct mmal_msg *msg, +- unsigned int payload_len, +- struct mmal_msg **msg_out, +- VCHI_HELD_MSG_T *msg_handle_out) +-{ +- struct mmal_msg_context *msg_context; +- int ret; +- unsigned long timeout; +- +- /* payload size must not cause message to exceed max size */ +- if (payload_len > +- (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) { +- pr_err("payload length %d exceeds max:%d\n", payload_len, +- (int)(MMAL_MSG_MAX_SIZE - +- sizeof(struct mmal_msg_header))); +- return -EINVAL; +- } +- +- msg_context = get_msg_context(instance); +- if (IS_ERR(msg_context)) +- return PTR_ERR(msg_context); +- +- init_completion(&msg_context->u.sync.cmplt); +- +- msg->h.magic = MMAL_MAGIC; +- msg->h.context = msg_context->handle; +- msg->h.status = 0; +- +- DBG_DUMP_MSG(msg, (sizeof(struct mmal_msg_header) + payload_len), +- ">>> sync message"); +- +- vchi_service_use(instance->handle); +- +- ret = vchi_queue_kernel_message(instance->handle, +- msg, +- sizeof(struct mmal_msg_header) + +- payload_len); +- +- vchi_service_release(instance->handle); +- +- if (ret) { +- pr_err("error %d queuing message\n", ret); +- release_msg_context(msg_context); +- return ret; +- } +- +- timeout = wait_for_completion_timeout(&msg_context->u.sync.cmplt, +- 3 * HZ); +- if (timeout == 0) { +- pr_err("timed out waiting for sync completion\n"); +- ret = -ETIME; +- /* todo: what happens if the message arrives after aborting */ +- release_msg_context(msg_context); +- return ret; +- } +- +- *msg_out = msg_context->u.sync.msg; +- *msg_handle_out = msg_context->u.sync.msg_handle; +- release_msg_context(msg_context); +- +- return 0; +-} +- +-static void dump_port_info(struct vchiq_mmal_port *port) +-{ +- pr_debug("port handle:0x%x enabled:%d\n", port->handle, port->enabled); +- +- pr_debug("buffer minimum num:%d size:%d align:%d\n", +- port->minimum_buffer.num, +- port->minimum_buffer.size, port->minimum_buffer.alignment); +- +- pr_debug("buffer recommended num:%d size:%d align:%d\n", +- port->recommended_buffer.num, +- port->recommended_buffer.size, +- port->recommended_buffer.alignment); +- +- pr_debug("buffer current values num:%d size:%d align:%d\n", +- port->current_buffer.num, +- port->current_buffer.size, port->current_buffer.alignment); +- +- pr_debug("elementary stream: type:%d encoding:0x%x variant:0x%x\n", +- port->format.type, +- port->format.encoding, port->format.encoding_variant); +- +- pr_debug(" bitrate:%d flags:0x%x\n", +- port->format.bitrate, port->format.flags); +- +- if (port->format.type == MMAL_ES_TYPE_VIDEO) { +- pr_debug +- ("es video format: width:%d height:%d colourspace:0x%x\n", +- port->es.video.width, port->es.video.height, +- port->es.video.color_space); +- +- pr_debug(" : crop xywh %d,%d,%d,%d\n", +- port->es.video.crop.x, +- port->es.video.crop.y, +- port->es.video.crop.width, port->es.video.crop.height); +- pr_debug(" : framerate %d/%d aspect %d/%d\n", +- port->es.video.frame_rate.num, +- port->es.video.frame_rate.den, +- port->es.video.par.num, port->es.video.par.den); +- } +-} +- +-static void port_to_mmal_msg(struct vchiq_mmal_port *port, struct mmal_port *p) +-{ +- /* todo do readonly fields need setting at all? */ +- p->type = port->type; +- p->index = port->index; +- p->index_all = 0; +- p->is_enabled = port->enabled; +- p->buffer_num_min = port->minimum_buffer.num; +- p->buffer_size_min = port->minimum_buffer.size; +- p->buffer_alignment_min = port->minimum_buffer.alignment; +- p->buffer_num_recommended = port->recommended_buffer.num; +- p->buffer_size_recommended = port->recommended_buffer.size; +- +- /* only three writable fields in a port */ +- p->buffer_num = port->current_buffer.num; +- p->buffer_size = port->current_buffer.size; +- p->userdata = (u32)(unsigned long)port; +-} +- +-static int port_info_set(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- pr_debug("setting port info port %p\n", port); +- if (!port) +- return -1; +- dump_port_info(port); +- +- m.h.type = MMAL_MSG_TYPE_PORT_INFO_SET; +- +- m.u.port_info_set.component_handle = port->component->handle; +- m.u.port_info_set.port_type = port->type; +- m.u.port_info_set.port_index = port->index; +- +- port_to_mmal_msg(port, &m.u.port_info_set.port); +- +- /* elementary stream format setup */ +- m.u.port_info_set.format.type = port->format.type; +- m.u.port_info_set.format.encoding = port->format.encoding; +- m.u.port_info_set.format.encoding_variant = +- port->format.encoding_variant; +- m.u.port_info_set.format.bitrate = port->format.bitrate; +- m.u.port_info_set.format.flags = port->format.flags; +- +- memcpy(&m.u.port_info_set.es, &port->es, +- sizeof(union mmal_es_specific_format)); +- +- m.u.port_info_set.format.extradata_size = port->format.extradata_size; +- memcpy(&m.u.port_info_set.extradata, port->format.extradata, +- port->format.extradata_size); +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(m.u.port_info_set), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_SET) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- /* return operation status */ +- ret = -rmsg->u.port_info_get_reply.status; +- +- pr_debug("%s:result:%d component:0x%x port:%d\n", __func__, ret, +- port->component->handle, port->handle); +- +-release_msg: +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-/* use port info get message to retrieve port information */ +-static int port_info_get(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- /* port info time */ +- m.h.type = MMAL_MSG_TYPE_PORT_INFO_GET; +- m.u.port_info_get.component_handle = port->component->handle; +- m.u.port_info_get.port_type = port->type; +- m.u.port_info_get.index = port->index; +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(m.u.port_info_get), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_GET) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- /* return operation status */ +- ret = -rmsg->u.port_info_get_reply.status; +- if (ret != MMAL_MSG_STATUS_SUCCESS) +- goto release_msg; +- +- if (rmsg->u.port_info_get_reply.port.is_enabled == 0) +- port->enabled = false; +- else +- port->enabled = true; +- +- /* copy the values out of the message */ +- port->handle = rmsg->u.port_info_get_reply.port_handle; +- +- /* port type and index cached to use on port info set because +- * it does not use a port handle +- */ +- port->type = rmsg->u.port_info_get_reply.port_type; +- port->index = rmsg->u.port_info_get_reply.port_index; +- +- port->minimum_buffer.num = +- rmsg->u.port_info_get_reply.port.buffer_num_min; +- port->minimum_buffer.size = +- rmsg->u.port_info_get_reply.port.buffer_size_min; +- port->minimum_buffer.alignment = +- rmsg->u.port_info_get_reply.port.buffer_alignment_min; +- +- port->recommended_buffer.alignment = +- rmsg->u.port_info_get_reply.port.buffer_alignment_min; +- port->recommended_buffer.num = +- rmsg->u.port_info_get_reply.port.buffer_num_recommended; +- +- port->current_buffer.num = rmsg->u.port_info_get_reply.port.buffer_num; +- port->current_buffer.size = +- rmsg->u.port_info_get_reply.port.buffer_size; +- +- /* stream format */ +- port->format.type = rmsg->u.port_info_get_reply.format.type; +- port->format.encoding = rmsg->u.port_info_get_reply.format.encoding; +- port->format.encoding_variant = +- rmsg->u.port_info_get_reply.format.encoding_variant; +- port->format.bitrate = rmsg->u.port_info_get_reply.format.bitrate; +- port->format.flags = rmsg->u.port_info_get_reply.format.flags; +- +- /* elementary stream format */ +- memcpy(&port->es, +- &rmsg->u.port_info_get_reply.es, +- sizeof(union mmal_es_specific_format)); +- port->format.es = &port->es; +- +- port->format.extradata_size = +- rmsg->u.port_info_get_reply.format.extradata_size; +- memcpy(port->format.extradata, +- rmsg->u.port_info_get_reply.extradata, +- port->format.extradata_size); +- +- pr_debug("received port info\n"); +- dump_port_info(port); +- +-release_msg: +- +- pr_debug("%s:result:%d component:0x%x port:%d\n", +- __func__, ret, port->component->handle, port->handle); +- +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-/* create comonent on vc */ +-static int create_component(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component, +- const char *name) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- /* build component create message */ +- m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE; +- m.u.component_create.client_component = (u32)(unsigned long)component; +- strncpy(m.u.component_create.name, name, +- sizeof(m.u.component_create.name)); +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(m.u.component_create), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != m.h.type) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- ret = -rmsg->u.component_create_reply.status; +- if (ret != MMAL_MSG_STATUS_SUCCESS) +- goto release_msg; +- +- /* a valid component response received */ +- component->handle = rmsg->u.component_create_reply.component_handle; +- component->inputs = rmsg->u.component_create_reply.input_num; +- component->outputs = rmsg->u.component_create_reply.output_num; +- component->clocks = rmsg->u.component_create_reply.clock_num; +- +- pr_debug("Component handle:0x%x in:%d out:%d clock:%d\n", +- component->handle, +- component->inputs, component->outputs, component->clocks); +- +-release_msg: +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-/* destroys a component on vc */ +-static int destroy_component(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- m.h.type = MMAL_MSG_TYPE_COMPONENT_DESTROY; +- m.u.component_destroy.component_handle = component->handle; +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(m.u.component_destroy), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != m.h.type) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- ret = -rmsg->u.component_destroy_reply.status; +- +-release_msg: +- +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-/* enable a component on vc */ +-static int enable_component(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- m.h.type = MMAL_MSG_TYPE_COMPONENT_ENABLE; +- m.u.component_enable.component_handle = component->handle; +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(m.u.component_enable), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != m.h.type) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- ret = -rmsg->u.component_enable_reply.status; +- +-release_msg: +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-/* disable a component on vc */ +-static int disable_component(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- m.h.type = MMAL_MSG_TYPE_COMPONENT_DISABLE; +- m.u.component_disable.component_handle = component->handle; +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(m.u.component_disable), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != m.h.type) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- ret = -rmsg->u.component_disable_reply.status; +- +-release_msg: +- +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-/* get version of mmal implementation */ +-static int get_version(struct vchiq_mmal_instance *instance, +- u32 *major_out, u32 *minor_out) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- m.h.type = MMAL_MSG_TYPE_GET_VERSION; +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(m.u.version), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != m.h.type) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- *major_out = rmsg->u.version.major; +- *minor_out = rmsg->u.version.minor; +- +-release_msg: +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-/* do a port action with a port as a parameter */ +-static int port_action_port(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- enum mmal_msg_port_action_type action_type) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- m.h.type = MMAL_MSG_TYPE_PORT_ACTION; +- m.u.port_action_port.component_handle = port->component->handle; +- m.u.port_action_port.port_handle = port->handle; +- m.u.port_action_port.action = action_type; +- +- port_to_mmal_msg(port, &m.u.port_action_port.port); +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(m.u.port_action_port), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- ret = -rmsg->u.port_action_reply.status; +- +- pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)\n", +- __func__, +- ret, port->component->handle, port->handle, +- port_action_type_names[action_type], action_type); +- +-release_msg: +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-/* do a port action with handles as parameters */ +-static int port_action_handle(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- enum mmal_msg_port_action_type action_type, +- u32 connect_component_handle, +- u32 connect_port_handle) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- m.h.type = MMAL_MSG_TYPE_PORT_ACTION; +- +- m.u.port_action_handle.component_handle = port->component->handle; +- m.u.port_action_handle.port_handle = port->handle; +- m.u.port_action_handle.action = action_type; +- +- m.u.port_action_handle.connect_component_handle = +- connect_component_handle; +- m.u.port_action_handle.connect_port_handle = connect_port_handle; +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(m.u.port_action_handle), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- ret = -rmsg->u.port_action_reply.status; +- +- pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d) connect component:0x%x connect port:%d\n", +- __func__, +- ret, port->component->handle, port->handle, +- port_action_type_names[action_type], +- action_type, connect_component_handle, connect_port_handle); +- +-release_msg: +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-static int port_parameter_set(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- u32 parameter_id, void *value, u32 value_size) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_SET; +- +- m.u.port_parameter_set.component_handle = port->component->handle; +- m.u.port_parameter_set.port_handle = port->handle; +- m.u.port_parameter_set.id = parameter_id; +- m.u.port_parameter_set.size = (2 * sizeof(u32)) + value_size; +- memcpy(&m.u.port_parameter_set.value, value, value_size); +- +- ret = send_synchronous_mmal_msg(instance, &m, +- (4 * sizeof(u32)) + value_size, +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_SET) { +- /* got an unexpected message type in reply */ +- ret = -EINVAL; +- goto release_msg; +- } +- +- ret = -rmsg->u.port_parameter_set_reply.status; +- +- pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", +- __func__, +- ret, port->component->handle, port->handle, parameter_id); +- +-release_msg: +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-static int port_parameter_get(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- u32 parameter_id, void *value, u32 *value_size) +-{ +- int ret; +- struct mmal_msg m; +- struct mmal_msg *rmsg; +- VCHI_HELD_MSG_T rmsg_handle; +- +- m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_GET; +- +- m.u.port_parameter_get.component_handle = port->component->handle; +- m.u.port_parameter_get.port_handle = port->handle; +- m.u.port_parameter_get.id = parameter_id; +- m.u.port_parameter_get.size = (2 * sizeof(u32)) + *value_size; +- +- ret = send_synchronous_mmal_msg(instance, &m, +- sizeof(struct +- mmal_msg_port_parameter_get), +- &rmsg, &rmsg_handle); +- if (ret) +- return ret; +- +- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_GET) { +- /* got an unexpected message type in reply */ +- pr_err("Incorrect reply type %d\n", rmsg->h.type); +- ret = -EINVAL; +- goto release_msg; +- } +- +- ret = -rmsg->u.port_parameter_get_reply.status; +- /* port_parameter_get_reply.size includes the header, +- * whilst *value_size doesn't. +- */ +- rmsg->u.port_parameter_get_reply.size -= (2 * sizeof(u32)); +- +- if (ret || rmsg->u.port_parameter_get_reply.size > *value_size) { +- /* Copy only as much as we have space for +- * but report true size of parameter +- */ +- memcpy(value, &rmsg->u.port_parameter_get_reply.value, +- *value_size); +- *value_size = rmsg->u.port_parameter_get_reply.size; +- } else { +- memcpy(value, &rmsg->u.port_parameter_get_reply.value, +- rmsg->u.port_parameter_get_reply.size); +- } +- +- pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, +- ret, port->component->handle, port->handle, parameter_id); +- +-release_msg: +- vchi_held_msg_release(&rmsg_handle); +- +- return ret; +-} +- +-/* disables a port and drains buffers from it */ +-static int port_disable(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port) +-{ +- int ret; +- struct list_head *q, *buf_head; +- unsigned long flags = 0; +- +- if (!port->enabled) +- return 0; +- +- port->enabled = false; +- +- ret = port_action_port(instance, port, +- MMAL_MSG_PORT_ACTION_TYPE_DISABLE); +- if (ret == 0) { +- /* +- * Drain all queued buffers on port. This should only +- * apply to buffers that have been queued before the port +- * has been enabled. If the port has been enabled and buffers +- * passed, then the buffers should have been removed from this +- * list, and we should get the relevant callbacks via VCHIQ +- * to release the buffers. +- */ +- spin_lock_irqsave(&port->slock, flags); +- +- list_for_each_safe(buf_head, q, &port->buffers) { +- struct mmal_buffer *mmalbuf; +- +- mmalbuf = list_entry(buf_head, struct mmal_buffer, +- list); +- list_del(buf_head); +- if (port->buffer_cb) +- port->buffer_cb(instance, +- port, 0, mmalbuf, 0, 0, +- MMAL_TIME_UNKNOWN, +- MMAL_TIME_UNKNOWN); +- } +- +- spin_unlock_irqrestore(&port->slock, flags); +- +- ret = port_info_get(instance, port); +- } +- +- return ret; +-} +- +-/* enable a port */ +-static int port_enable(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port) +-{ +- unsigned int hdr_count; +- struct list_head *q, *buf_head; +- int ret; +- +- if (port->enabled) +- return 0; +- +- ret = port_action_port(instance, port, +- MMAL_MSG_PORT_ACTION_TYPE_ENABLE); +- if (ret) +- goto done; +- +- port->enabled = true; +- +- if (port->buffer_cb) { +- /* send buffer headers to videocore */ +- hdr_count = 1; +- list_for_each_safe(buf_head, q, &port->buffers) { +- struct mmal_buffer *mmalbuf; +- +- mmalbuf = list_entry(buf_head, struct mmal_buffer, +- list); +- ret = buffer_from_host(instance, port, mmalbuf); +- if (ret) +- goto done; +- +- list_del(buf_head); +- hdr_count++; +- if (hdr_count > port->current_buffer.num) +- break; +- } +- } +- +- ret = port_info_get(instance, port); +- +-done: +- return ret; +-} +- +-/* ------------------------------------------------------------------ +- * Exported API +- *------------------------------------------------------------------ +- */ +- +-int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- ret = port_info_set(instance, port); +- if (ret) +- goto release_unlock; +- +- /* read what has actually been set */ +- ret = port_info_get(instance, port); +- +-release_unlock: +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- u32 parameter, void *value, u32 value_size) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- ret = port_parameter_set(instance, port, parameter, value, value_size); +- +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- u32 parameter, void *value, u32 *value_size) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- ret = port_parameter_get(instance, port, parameter, value, value_size); +- +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-/* enable a port +- * +- * enables a port and queues buffers for satisfying callbacks if we +- * provide a callback handler +- */ +-int vchiq_mmal_port_enable(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- vchiq_mmal_buffer_cb buffer_cb) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- /* already enabled - noop */ +- if (port->enabled) { +- ret = 0; +- goto unlock; +- } +- +- port->buffer_cb = buffer_cb; +- +- ret = port_enable(instance, port); +- +-unlock: +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- if (!port->enabled) { +- mutex_unlock(&instance->vchiq_mutex); +- return 0; +- } +- +- ret = port_disable(instance, port); +- +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-/* ports will be connected in a tunneled manner so data buffers +- * are not handled by client. +- */ +-int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *src, +- struct vchiq_mmal_port *dst) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- /* disconnect ports if connected */ +- if (src->connected) { +- ret = port_disable(instance, src); +- if (ret) { +- pr_err("failed disabling src port(%d)\n", ret); +- goto release_unlock; +- } +- +- /* do not need to disable the destination port as they +- * are connected and it is done automatically +- */ +- +- ret = port_action_handle(instance, src, +- MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, +- src->connected->component->handle, +- src->connected->handle); +- if (ret < 0) { +- pr_err("failed disconnecting src port\n"); +- goto release_unlock; +- } +- src->connected->enabled = false; +- src->connected = NULL; +- } +- +- if (!dst) { +- /* do not make new connection */ +- ret = 0; +- pr_debug("not making new connection\n"); +- goto release_unlock; +- } +- +- /* copy src port format to dst */ +- dst->format.encoding = src->format.encoding; +- dst->es.video.width = src->es.video.width; +- dst->es.video.height = src->es.video.height; +- dst->es.video.crop.x = src->es.video.crop.x; +- dst->es.video.crop.y = src->es.video.crop.y; +- dst->es.video.crop.width = src->es.video.crop.width; +- dst->es.video.crop.height = src->es.video.crop.height; +- dst->es.video.frame_rate.num = src->es.video.frame_rate.num; +- dst->es.video.frame_rate.den = src->es.video.frame_rate.den; +- +- /* set new format */ +- ret = port_info_set(instance, dst); +- if (ret) { +- pr_debug("setting port info failed\n"); +- goto release_unlock; +- } +- +- /* read what has actually been set */ +- ret = port_info_get(instance, dst); +- if (ret) { +- pr_debug("read back port info failed\n"); +- goto release_unlock; +- } +- +- /* connect two ports together */ +- ret = port_action_handle(instance, src, +- MMAL_MSG_PORT_ACTION_TYPE_CONNECT, +- dst->component->handle, dst->handle); +- if (ret < 0) { +- pr_debug("connecting port %d:%d to %d:%d failed\n", +- src->component->handle, src->handle, +- dst->component->handle, dst->handle); +- goto release_unlock; +- } +- src->connected = dst; +- +-release_unlock: +- +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- struct mmal_buffer *buffer) +-{ +- unsigned long flags = 0; +- int ret; +- +- ret = buffer_from_host(instance, port, buffer); +- if (ret == -EINVAL) { +- /* Port is disabled. Queue for when it is enabled. */ +- spin_lock_irqsave(&port->slock, flags); +- list_add_tail(&buffer->list, &port->buffers); +- spin_unlock_irqrestore(&port->slock, flags); +- } +- +- return 0; +-} +- +-int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, +- struct mmal_buffer *buf) +-{ +- struct mmal_msg_context *msg_context = get_msg_context(instance); +- +- if (IS_ERR(msg_context)) +- return (PTR_ERR(msg_context)); +- +- buf->msg_context = msg_context; +- return 0; +-} +- +-int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf) +-{ +- struct mmal_msg_context *msg_context = buf->msg_context; +- +- if (msg_context) +- release_msg_context(msg_context); +- buf->msg_context = NULL; +- +- return 0; +-} +- +-/* Initialise a mmal component and its ports +- * +- */ +-int vchiq_mmal_component_init(struct vchiq_mmal_instance *instance, +- const char *name, +- struct vchiq_mmal_component **component_out) +-{ +- int ret; +- int idx; /* port index */ +- struct vchiq_mmal_component *component; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) { +- ret = -EINVAL; /* todo is this correct error? */ +- goto unlock; +- } +- +- component = &instance->component[instance->component_idx]; +- +- ret = create_component(instance, component, name); +- if (ret < 0) { +- pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", +- __func__, ret); +- goto unlock; +- } +- +- /* ports info needs gathering */ +- component->control.type = MMAL_PORT_TYPE_CONTROL; +- component->control.index = 0; +- component->control.component = component; +- spin_lock_init(&component->control.slock); +- INIT_LIST_HEAD(&component->control.buffers); +- ret = port_info_get(instance, &component->control); +- if (ret < 0) +- goto release_component; +- +- for (idx = 0; idx < component->inputs; idx++) { +- component->input[idx].type = MMAL_PORT_TYPE_INPUT; +- component->input[idx].index = idx; +- component->input[idx].component = component; +- spin_lock_init(&component->input[idx].slock); +- INIT_LIST_HEAD(&component->input[idx].buffers); +- ret = port_info_get(instance, &component->input[idx]); +- if (ret < 0) +- goto release_component; +- } +- +- for (idx = 0; idx < component->outputs; idx++) { +- component->output[idx].type = MMAL_PORT_TYPE_OUTPUT; +- component->output[idx].index = idx; +- component->output[idx].component = component; +- spin_lock_init(&component->output[idx].slock); +- INIT_LIST_HEAD(&component->output[idx].buffers); +- ret = port_info_get(instance, &component->output[idx]); +- if (ret < 0) +- goto release_component; +- } +- +- for (idx = 0; idx < component->clocks; idx++) { +- component->clock[idx].type = MMAL_PORT_TYPE_CLOCK; +- component->clock[idx].index = idx; +- component->clock[idx].component = component; +- spin_lock_init(&component->clock[idx].slock); +- INIT_LIST_HEAD(&component->clock[idx].buffers); +- ret = port_info_get(instance, &component->clock[idx]); +- if (ret < 0) +- goto release_component; +- } +- +- instance->component_idx++; +- +- *component_out = component; +- +- mutex_unlock(&instance->vchiq_mutex); +- +- return 0; +- +-release_component: +- destroy_component(instance, component); +-unlock: +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-/* +- * cause a mmal component to be destroyed +- */ +-int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- if (component->enabled) +- ret = disable_component(instance, component); +- +- ret = destroy_component(instance, component); +- +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-/* +- * cause a mmal component to be enabled +- */ +-int vchiq_mmal_component_enable(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- if (component->enabled) { +- mutex_unlock(&instance->vchiq_mutex); +- return 0; +- } +- +- ret = enable_component(instance, component); +- if (ret == 0) +- component->enabled = true; +- +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-/* +- * cause a mmal component to be enabled +- */ +-int vchiq_mmal_component_disable(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- if (!component->enabled) { +- mutex_unlock(&instance->vchiq_mutex); +- return 0; +- } +- +- ret = disable_component(instance, component); +- if (ret == 0) +- component->enabled = false; +- +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-int vchiq_mmal_version(struct vchiq_mmal_instance *instance, +- u32 *major_out, u32 *minor_out) +-{ +- int ret; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- ret = get_version(instance, major_out, minor_out); +- +- mutex_unlock(&instance->vchiq_mutex); +- +- return ret; +-} +- +-int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance) +-{ +- int status = 0; +- +- if (!instance) +- return -EINVAL; +- +- if (mutex_lock_interruptible(&instance->vchiq_mutex)) +- return -EINTR; +- +- vchi_service_use(instance->handle); +- +- status = vchi_service_close(instance->handle); +- if (status != 0) +- pr_err("mmal-vchiq: VCHIQ close failed\n"); +- +- mutex_unlock(&instance->vchiq_mutex); +- +- flush_workqueue(instance->bulk_wq); +- destroy_workqueue(instance->bulk_wq); +- +- vfree(instance->bulk_scratch); +- +- idr_destroy(&instance->context_map); +- +- kfree(instance); +- +- return status; +-} +- +-int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance) +-{ +- int status; +- struct vchiq_mmal_instance *instance; +- static VCHI_CONNECTION_T *vchi_connection; +- static VCHI_INSTANCE_T vchi_instance; +- SERVICE_CREATION_T params = { +- .version = VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER), +- .service_id = VC_MMAL_SERVER_NAME, +- .connection = vchi_connection, +- .rx_fifo_size = 0, +- .tx_fifo_size = 0, +- .callback = service_callback, +- .callback_param = NULL, +- .want_unaligned_bulk_rx = 1, +- .want_unaligned_bulk_tx = 1, +- .want_crc = 0 +- }; +- +- /* compile time checks to ensure structure size as they are +- * directly (de)serialised from memory. +- */ +- +- /* ensure the header structure has packed to the correct size */ +- BUILD_BUG_ON(sizeof(struct mmal_msg_header) != 24); +- +- /* ensure message structure does not exceed maximum length */ +- BUILD_BUG_ON(sizeof(struct mmal_msg) > MMAL_MSG_MAX_SIZE); +- +- /* mmal port struct is correct size */ +- BUILD_BUG_ON(sizeof(struct mmal_port) != 64); +- +- /* create a vchi instance */ +- status = vchi_initialise(&vchi_instance); +- if (status) { +- pr_err("Failed to initialise VCHI instance (status=%d)\n", +- status); +- return -EIO; +- } +- +- status = vchi_connect(NULL, 0, vchi_instance); +- if (status) { +- pr_err("Failed to connect VCHI instance (status=%d)\n", status); +- return -EIO; +- } +- +- instance = kzalloc(sizeof(*instance), GFP_KERNEL); +- +- if (!instance) +- return -ENOMEM; +- +- mutex_init(&instance->vchiq_mutex); +- +- instance->bulk_scratch = vmalloc(PAGE_SIZE); +- +- mutex_init(&instance->context_map_lock); +- idr_init_base(&instance->context_map, 1); +- +- params.callback_param = instance; +- +- instance->bulk_wq = alloc_ordered_workqueue("mmal-vchiq", +- WQ_MEM_RECLAIM); +- if (!instance->bulk_wq) +- goto err_free; +- +- status = vchi_service_open(vchi_instance, ¶ms, &instance->handle); +- if (status) { +- pr_err("Failed to open VCHI service connection (status=%d)\n", +- status); +- goto err_close_services; +- } +- +- vchi_service_release(instance->handle); +- +- *out_instance = instance; +- +- return 0; +- +-err_close_services: +- vchi_service_close(instance->handle); +- destroy_workqueue(instance->bulk_wq); +-err_free: +- vfree(instance->bulk_scratch); +- kfree(instance); +- return -ENODEV; +-} +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -0,0 +1,1921 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom ++ * ++ * V4L2 driver MMAL vchiq interface code ++ */ ++ ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "mmal-common.h" ++#include "mmal-vchiq.h" ++#include "mmal-msg.h" ++ ++#define USE_VCHIQ_ARM ++#include "interface/vchi/vchi.h" ++ ++MODULE_DESCRIPTION("BCM2835 MMAL VCHIQ interface"); ++MODULE_AUTHOR("Dave Stevenson, "); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION("0.0.1"); ++ ++/* maximum number of components supported */ ++#define VCHIQ_MMAL_MAX_COMPONENTS 4 ++ ++/*#define FULL_MSG_DUMP 1*/ ++ ++#ifdef DEBUG ++static const char *const msg_type_names[] = { ++ "UNKNOWN", ++ "QUIT", ++ "SERVICE_CLOSED", ++ "GET_VERSION", ++ "COMPONENT_CREATE", ++ "COMPONENT_DESTROY", ++ "COMPONENT_ENABLE", ++ "COMPONENT_DISABLE", ++ "PORT_INFO_GET", ++ "PORT_INFO_SET", ++ "PORT_ACTION", ++ "BUFFER_FROM_HOST", ++ "BUFFER_TO_HOST", ++ "GET_STATS", ++ "PORT_PARAMETER_SET", ++ "PORT_PARAMETER_GET", ++ "EVENT_TO_HOST", ++ "GET_CORE_STATS_FOR_PORT", ++ "OPAQUE_ALLOCATOR", ++ "CONSUME_MEM", ++ "LMK", ++ "OPAQUE_ALLOCATOR_DESC", ++ "DRM_GET_LHS32", ++ "DRM_GET_TIME", ++ "BUFFER_FROM_HOST_ZEROLEN", ++ "PORT_FLUSH", ++ "HOST_LOG", ++}; ++#endif ++ ++static const char *const port_action_type_names[] = { ++ "UNKNOWN", ++ "ENABLE", ++ "DISABLE", ++ "FLUSH", ++ "CONNECT", ++ "DISCONNECT", ++ "SET_REQUIREMENTS", ++}; ++ ++#if defined(DEBUG) ++#if defined(FULL_MSG_DUMP) ++#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) \ ++ do { \ ++ pr_debug(TITLE" type:%s(%d) length:%d\n", \ ++ msg_type_names[(MSG)->h.type], \ ++ (MSG)->h.type, (MSG_LEN)); \ ++ print_hex_dump(KERN_DEBUG, "<h.type], \ ++ (MSG)->h.type, (MSG_LEN)); \ ++ } ++#endif ++#else ++#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) ++#endif ++ ++struct vchiq_mmal_instance; ++ ++/* normal message context */ ++struct mmal_msg_context { ++ struct vchiq_mmal_instance *instance; ++ ++ /* Index in the context_map idr so that we can find the ++ * mmal_msg_context again when servicing the VCHI reply. ++ */ ++ int handle; ++ ++ union { ++ struct { ++ /* work struct for buffer_cb callback */ ++ struct work_struct work; ++ /* work struct for deferred callback */ ++ struct work_struct buffer_to_host_work; ++ /* mmal instance */ ++ struct vchiq_mmal_instance *instance; ++ /* mmal port */ ++ struct vchiq_mmal_port *port; ++ /* actual buffer used to store bulk reply */ ++ struct mmal_buffer *buffer; ++ /* amount of buffer used */ ++ unsigned long buffer_used; ++ /* MMAL buffer flags */ ++ u32 mmal_flags; ++ /* Presentation and Decode timestamps */ ++ s64 pts; ++ s64 dts; ++ ++ int status; /* context status */ ++ ++ } bulk; /* bulk data */ ++ ++ struct { ++ /* message handle to release */ ++ VCHI_HELD_MSG_T msg_handle; ++ /* pointer to received message */ ++ struct mmal_msg *msg; ++ /* received message length */ ++ u32 msg_len; ++ /* completion upon reply */ ++ struct completion cmplt; ++ } sync; /* synchronous response */ ++ } u; ++ ++}; ++ ++struct vchiq_mmal_instance { ++ VCHI_SERVICE_HANDLE_T handle; ++ ++ /* ensure serialised access to service */ ++ struct mutex vchiq_mutex; ++ ++ /* vmalloc page to receive scratch bulk xfers into */ ++ void *bulk_scratch; ++ ++ struct idr context_map; ++ /* protect accesses to context_map */ ++ struct mutex context_map_lock; ++ ++ /* component to use next */ ++ int component_idx; ++ struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS]; ++ ++ /* ordered workqueue to process all bulk operations */ ++ struct workqueue_struct *bulk_wq; ++}; ++ ++static struct mmal_msg_context * ++get_msg_context(struct vchiq_mmal_instance *instance) ++{ ++ struct mmal_msg_context *msg_context; ++ int handle; ++ ++ /* todo: should this be allocated from a pool to avoid kzalloc */ ++ msg_context = kzalloc(sizeof(*msg_context), GFP_KERNEL); ++ ++ if (!msg_context) ++ return ERR_PTR(-ENOMEM); ++ ++ /* Create an ID that will be passed along with our message so ++ * that when we service the VCHI reply, we can look up what ++ * message is being replied to. ++ */ ++ mutex_lock(&instance->context_map_lock); ++ handle = idr_alloc(&instance->context_map, msg_context, ++ 0, 0, GFP_KERNEL); ++ mutex_unlock(&instance->context_map_lock); ++ ++ if (handle < 0) { ++ kfree(msg_context); ++ return ERR_PTR(handle); ++ } ++ ++ msg_context->instance = instance; ++ msg_context->handle = handle; ++ ++ return msg_context; ++} ++ ++static struct mmal_msg_context * ++lookup_msg_context(struct vchiq_mmal_instance *instance, int handle) ++{ ++ return idr_find(&instance->context_map, handle); ++} ++ ++static void ++release_msg_context(struct mmal_msg_context *msg_context) ++{ ++ struct vchiq_mmal_instance *instance = msg_context->instance; ++ ++ mutex_lock(&instance->context_map_lock); ++ idr_remove(&instance->context_map, msg_context->handle); ++ mutex_unlock(&instance->context_map_lock); ++ kfree(msg_context); ++} ++ ++/* deals with receipt of event to host message */ ++static void event_to_host_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, u32 msg_len) ++{ ++ pr_debug("unhandled event\n"); ++ pr_debug("component:%u port type:%d num:%d cmd:0x%x length:%d\n", ++ msg->u.event_to_host.client_component, ++ msg->u.event_to_host.port_type, ++ msg->u.event_to_host.port_num, ++ msg->u.event_to_host.cmd, msg->u.event_to_host.length); ++} ++ ++/* workqueue scheduled callback ++ * ++ * we do this because it is important we do not call any other vchiq ++ * sync calls from witin the message delivery thread ++ */ ++static void buffer_work_cb(struct work_struct *work) ++{ ++ struct mmal_msg_context *msg_context = ++ container_of(work, struct mmal_msg_context, u.bulk.work); ++ ++ atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); ++ ++ msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, ++ msg_context->u.bulk.port, ++ msg_context->u.bulk.status, ++ msg_context->u.bulk.buffer, ++ msg_context->u.bulk.buffer_used, ++ msg_context->u.bulk.mmal_flags, ++ msg_context->u.bulk.dts, ++ msg_context->u.bulk.pts); ++} ++ ++/* workqueue scheduled callback to handle receiving buffers ++ * ++ * VCHI will allow up to 4 bulk receives to be scheduled before blocking. ++ * If we block in the service_callback context then we can't process the ++ * VCHI_CALLBACK_BULK_RECEIVED message that would otherwise allow the blocked ++ * vchi_bulk_queue_receive() call to complete. ++ */ ++static void buffer_to_host_work_cb(struct work_struct *work) ++{ ++ struct mmal_msg_context *msg_context = ++ container_of(work, struct mmal_msg_context, ++ u.bulk.buffer_to_host_work); ++ struct vchiq_mmal_instance *instance = msg_context->instance; ++ unsigned long len = msg_context->u.bulk.buffer_used; ++ int ret; ++ ++ if (!len) ++ /* Dummy receive to ensure the buffers remain in order */ ++ len = 8; ++ /* queue the bulk submission */ ++ vchi_service_use(instance->handle); ++ ret = vchi_bulk_queue_receive(instance->handle, ++ msg_context->u.bulk.buffer->buffer, ++ /* Actual receive needs to be a multiple ++ * of 4 bytes ++ */ ++ (len + 3) & ~3, ++ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, ++ msg_context); ++ ++ vchi_service_release(instance->handle); ++ ++ if (ret != 0) ++ pr_err("%s: ctx: %p, vchi_bulk_queue_receive failed %d\n", ++ __func__, msg_context, ret); ++} ++ ++/* enqueue a bulk receive for a given message context */ ++static int bulk_receive(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, ++ struct mmal_msg_context *msg_context) ++{ ++ unsigned long rd_len; ++ ++ rd_len = msg->u.buffer_from_host.buffer_header.length; ++ ++ if (!msg_context->u.bulk.buffer) { ++ pr_err("bulk.buffer not configured - error in buffer_from_host\n"); ++ ++ /* todo: this is a serious error, we should never have ++ * committed a buffer_to_host operation to the mmal ++ * port without the buffer to back it up (underflow ++ * handling) and there is no obvious way to deal with ++ * this - how is the mmal servie going to react when ++ * we fail to do the xfer and reschedule a buffer when ++ * it arrives? perhaps a starved flag to indicate a ++ * waiting bulk receive? ++ */ ++ ++ return -EINVAL; ++ } ++ ++ /* ensure we do not overrun the available buffer */ ++ if (rd_len > msg_context->u.bulk.buffer->buffer_size) { ++ rd_len = msg_context->u.bulk.buffer->buffer_size; ++ pr_warn("short read as not enough receive buffer space\n"); ++ /* todo: is this the correct response, what happens to ++ * the rest of the message data? ++ */ ++ } ++ ++ /* store length */ ++ msg_context->u.bulk.buffer_used = rd_len; ++ msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; ++ msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; ++ ++ queue_work(msg_context->instance->bulk_wq, ++ &msg_context->u.bulk.buffer_to_host_work); ++ ++ return 0; ++} ++ ++/* data in message, memcpy from packet into output buffer */ ++static int inline_receive(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, ++ struct mmal_msg_context *msg_context) ++{ ++ memcpy(msg_context->u.bulk.buffer->buffer, ++ msg->u.buffer_from_host.short_data, ++ msg->u.buffer_from_host.payload_in_message); ++ ++ msg_context->u.bulk.buffer_used = ++ msg->u.buffer_from_host.payload_in_message; ++ ++ return 0; ++} ++ ++/* queue the buffer availability with MMAL_MSG_TYPE_BUFFER_FROM_HOST */ ++static int ++buffer_from_host(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, struct mmal_buffer *buf) ++{ ++ struct mmal_msg_context *msg_context; ++ struct mmal_msg m; ++ int ret; ++ ++ if (!port->enabled) ++ return -EINVAL; ++ ++ pr_debug("instance:%p buffer:%p\n", instance->handle, buf); ++ ++ /* get context */ ++ if (!buf->msg_context) { ++ pr_err("%s: msg_context not allocated, buf %p\n", __func__, ++ buf); ++ return -EINVAL; ++ } ++ msg_context = buf->msg_context; ++ ++ /* store bulk message context for when data arrives */ ++ msg_context->u.bulk.instance = instance; ++ msg_context->u.bulk.port = port; ++ msg_context->u.bulk.buffer = buf; ++ msg_context->u.bulk.buffer_used = 0; ++ ++ /* initialise work structure ready to schedule callback */ ++ INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb); ++ INIT_WORK(&msg_context->u.bulk.buffer_to_host_work, ++ buffer_to_host_work_cb); ++ ++ atomic_inc(&port->buffers_with_vpu); ++ ++ /* prep the buffer from host message */ ++ memset(&m, 0xbc, sizeof(m)); /* just to make debug clearer */ ++ ++ m.h.type = MMAL_MSG_TYPE_BUFFER_FROM_HOST; ++ m.h.magic = MMAL_MAGIC; ++ m.h.context = msg_context->handle; ++ m.h.status = 0; ++ ++ /* drvbuf is our private data passed back */ ++ m.u.buffer_from_host.drvbuf.magic = MMAL_MAGIC; ++ m.u.buffer_from_host.drvbuf.component_handle = port->component->handle; ++ m.u.buffer_from_host.drvbuf.port_handle = port->handle; ++ m.u.buffer_from_host.drvbuf.client_context = msg_context->handle; ++ ++ /* buffer header */ ++ m.u.buffer_from_host.buffer_header.cmd = 0; ++ m.u.buffer_from_host.buffer_header.data = ++ (u32)(unsigned long)buf->buffer; ++ m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; ++ m.u.buffer_from_host.buffer_header.length = 0; /* nothing used yet */ ++ m.u.buffer_from_host.buffer_header.offset = 0; /* no offset */ ++ m.u.buffer_from_host.buffer_header.flags = 0; /* no flags */ ++ m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; ++ m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; ++ ++ /* clear buffer type sepecific data */ ++ memset(&m.u.buffer_from_host.buffer_header_type_specific, 0, ++ sizeof(m.u.buffer_from_host.buffer_header_type_specific)); ++ ++ /* no payload in message */ ++ m.u.buffer_from_host.payload_in_message = 0; ++ ++ vchi_service_use(instance->handle); ++ ++ ret = vchi_queue_kernel_message(instance->handle, ++ &m, ++ sizeof(struct mmal_msg_header) + ++ sizeof(m.u.buffer_from_host)); ++ ++ vchi_service_release(instance->handle); ++ ++ return ret; ++} ++ ++/* deals with receipt of buffer to host message */ ++static void buffer_to_host_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, u32 msg_len) ++{ ++ struct mmal_msg_context *msg_context; ++ u32 handle; ++ ++ pr_debug("%s: instance:%p msg:%p msg_len:%d\n", ++ __func__, instance, msg, msg_len); ++ ++ if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) { ++ handle = msg->u.buffer_from_host.drvbuf.client_context; ++ msg_context = lookup_msg_context(instance, handle); ++ ++ if (!msg_context) { ++ pr_err("drvbuf.client_context(%u) is invalid\n", ++ handle); ++ return; ++ } ++ } else { ++ pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n"); ++ return; ++ } ++ ++ msg_context->u.bulk.mmal_flags = ++ msg->u.buffer_from_host.buffer_header.flags; ++ ++ if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) { ++ /* message reception had an error */ ++ pr_warn("error %d in reply\n", msg->h.status); ++ ++ msg_context->u.bulk.status = msg->h.status; ++ ++ } else if (msg->u.buffer_from_host.buffer_header.length == 0) { ++ /* empty buffer */ ++ if (msg->u.buffer_from_host.buffer_header.flags & ++ MMAL_BUFFER_HEADER_FLAG_EOS) { ++ msg_context->u.bulk.status = ++ bulk_receive(instance, msg, msg_context); ++ if (msg_context->u.bulk.status == 0) ++ return; /* successful bulk submission, bulk ++ * completion will trigger callback ++ */ ++ } else { ++ /* do callback with empty buffer - not EOS though */ ++ msg_context->u.bulk.status = 0; ++ msg_context->u.bulk.buffer_used = 0; ++ } ++ } else if (msg->u.buffer_from_host.payload_in_message == 0) { ++ /* data is not in message, queue a bulk receive */ ++ msg_context->u.bulk.status = ++ bulk_receive(instance, msg, msg_context); ++ if (msg_context->u.bulk.status == 0) ++ return; /* successful bulk submission, bulk ++ * completion will trigger callback ++ */ ++ ++ /* failed to submit buffer, this will end badly */ ++ pr_err("error %d on bulk submission\n", ++ msg_context->u.bulk.status); ++ ++ } else if (msg->u.buffer_from_host.payload_in_message <= ++ MMAL_VC_SHORT_DATA) { ++ /* data payload within message */ ++ msg_context->u.bulk.status = inline_receive(instance, msg, ++ msg_context); ++ } else { ++ pr_err("message with invalid short payload\n"); ++ ++ /* signal error */ ++ msg_context->u.bulk.status = -EINVAL; ++ msg_context->u.bulk.buffer_used = ++ msg->u.buffer_from_host.payload_in_message; ++ } ++ ++ /* schedule the port callback */ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ ++static void bulk_receive_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg_context *msg_context) ++{ ++ msg_context->u.bulk.status = 0; ++ ++ /* schedule the port callback */ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ ++static void bulk_abort_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg_context *msg_context) ++{ ++ pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context); ++ ++ msg_context->u.bulk.status = -EINTR; ++ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ ++/* incoming event service callback */ ++static void service_callback(void *param, ++ const VCHI_CALLBACK_REASON_T reason, ++ void *bulk_ctx) ++{ ++ struct vchiq_mmal_instance *instance = param; ++ int status; ++ u32 msg_len; ++ struct mmal_msg *msg; ++ VCHI_HELD_MSG_T msg_handle; ++ struct mmal_msg_context *msg_context; ++ ++ if (!instance) { ++ pr_err("Message callback passed NULL instance\n"); ++ return; ++ } ++ ++ switch (reason) { ++ case VCHI_CALLBACK_MSG_AVAILABLE: ++ status = vchi_msg_hold(instance->handle, (void **)&msg, ++ &msg_len, VCHI_FLAGS_NONE, &msg_handle); ++ if (status) { ++ pr_err("Unable to dequeue a message (%d)\n", status); ++ break; ++ } ++ ++ DBG_DUMP_MSG(msg, msg_len, "<<< reply message"); ++ ++ /* handling is different for buffer messages */ ++ switch (msg->h.type) { ++ case MMAL_MSG_TYPE_BUFFER_FROM_HOST: ++ vchi_held_msg_release(&msg_handle); ++ break; ++ ++ case MMAL_MSG_TYPE_EVENT_TO_HOST: ++ event_to_host_cb(instance, msg, msg_len); ++ vchi_held_msg_release(&msg_handle); ++ ++ break; ++ ++ case MMAL_MSG_TYPE_BUFFER_TO_HOST: ++ buffer_to_host_cb(instance, msg, msg_len); ++ vchi_held_msg_release(&msg_handle); ++ break; ++ ++ default: ++ /* messages dependent on header context to complete */ ++ if (!msg->h.context) { ++ pr_err("received message context was null!\n"); ++ vchi_held_msg_release(&msg_handle); ++ break; ++ } ++ ++ msg_context = lookup_msg_context(instance, ++ msg->h.context); ++ if (!msg_context) { ++ pr_err("received invalid message context %u!\n", ++ msg->h.context); ++ vchi_held_msg_release(&msg_handle); ++ break; ++ } ++ ++ /* fill in context values */ ++ msg_context->u.sync.msg_handle = msg_handle; ++ msg_context->u.sync.msg = msg; ++ msg_context->u.sync.msg_len = msg_len; ++ ++ /* todo: should this check (completion_done() ++ * == 1) for no one waiting? or do we need a ++ * flag to tell us the completion has been ++ * interrupted so we can free the message and ++ * its context. This probably also solves the ++ * message arriving after interruption todo ++ * below ++ */ ++ ++ /* complete message so caller knows it happened */ ++ complete(&msg_context->u.sync.cmplt); ++ break; ++ } ++ ++ break; ++ ++ case VCHI_CALLBACK_BULK_RECEIVED: ++ bulk_receive_cb(instance, bulk_ctx); ++ break; ++ ++ case VCHI_CALLBACK_BULK_RECEIVE_ABORTED: ++ bulk_abort_cb(instance, bulk_ctx); ++ break; ++ ++ case VCHI_CALLBACK_SERVICE_CLOSED: ++ /* TODO: consider if this requires action if received when ++ * driver is not explicitly closing the service ++ */ ++ break; ++ ++ default: ++ pr_err("Received unhandled message reason %d\n", reason); ++ break; ++ } ++} ++ ++static int send_synchronous_mmal_msg(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, ++ unsigned int payload_len, ++ struct mmal_msg **msg_out, ++ VCHI_HELD_MSG_T *msg_handle_out) ++{ ++ struct mmal_msg_context *msg_context; ++ int ret; ++ unsigned long timeout; ++ ++ /* payload size must not cause message to exceed max size */ ++ if (payload_len > ++ (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) { ++ pr_err("payload length %d exceeds max:%d\n", payload_len, ++ (int)(MMAL_MSG_MAX_SIZE - ++ sizeof(struct mmal_msg_header))); ++ return -EINVAL; ++ } ++ ++ msg_context = get_msg_context(instance); ++ if (IS_ERR(msg_context)) ++ return PTR_ERR(msg_context); ++ ++ init_completion(&msg_context->u.sync.cmplt); ++ ++ msg->h.magic = MMAL_MAGIC; ++ msg->h.context = msg_context->handle; ++ msg->h.status = 0; ++ ++ DBG_DUMP_MSG(msg, (sizeof(struct mmal_msg_header) + payload_len), ++ ">>> sync message"); ++ ++ vchi_service_use(instance->handle); ++ ++ ret = vchi_queue_kernel_message(instance->handle, ++ msg, ++ sizeof(struct mmal_msg_header) + ++ payload_len); ++ ++ vchi_service_release(instance->handle); ++ ++ if (ret) { ++ pr_err("error %d queuing message\n", ret); ++ release_msg_context(msg_context); ++ return ret; ++ } ++ ++ timeout = wait_for_completion_timeout(&msg_context->u.sync.cmplt, ++ 3 * HZ); ++ if (timeout == 0) { ++ pr_err("timed out waiting for sync completion\n"); ++ ret = -ETIME; ++ /* todo: what happens if the message arrives after aborting */ ++ release_msg_context(msg_context); ++ return ret; ++ } ++ ++ *msg_out = msg_context->u.sync.msg; ++ *msg_handle_out = msg_context->u.sync.msg_handle; ++ release_msg_context(msg_context); ++ ++ return 0; ++} ++ ++static void dump_port_info(struct vchiq_mmal_port *port) ++{ ++ pr_debug("port handle:0x%x enabled:%d\n", port->handle, port->enabled); ++ ++ pr_debug("buffer minimum num:%d size:%d align:%d\n", ++ port->minimum_buffer.num, ++ port->minimum_buffer.size, port->minimum_buffer.alignment); ++ ++ pr_debug("buffer recommended num:%d size:%d align:%d\n", ++ port->recommended_buffer.num, ++ port->recommended_buffer.size, ++ port->recommended_buffer.alignment); ++ ++ pr_debug("buffer current values num:%d size:%d align:%d\n", ++ port->current_buffer.num, ++ port->current_buffer.size, port->current_buffer.alignment); ++ ++ pr_debug("elementary stream: type:%d encoding:0x%x variant:0x%x\n", ++ port->format.type, ++ port->format.encoding, port->format.encoding_variant); ++ ++ pr_debug(" bitrate:%d flags:0x%x\n", ++ port->format.bitrate, port->format.flags); ++ ++ if (port->format.type == MMAL_ES_TYPE_VIDEO) { ++ pr_debug ++ ("es video format: width:%d height:%d colourspace:0x%x\n", ++ port->es.video.width, port->es.video.height, ++ port->es.video.color_space); ++ ++ pr_debug(" : crop xywh %d,%d,%d,%d\n", ++ port->es.video.crop.x, ++ port->es.video.crop.y, ++ port->es.video.crop.width, port->es.video.crop.height); ++ pr_debug(" : framerate %d/%d aspect %d/%d\n", ++ port->es.video.frame_rate.num, ++ port->es.video.frame_rate.den, ++ port->es.video.par.num, port->es.video.par.den); ++ } ++} ++ ++static void port_to_mmal_msg(struct vchiq_mmal_port *port, struct mmal_port *p) ++{ ++ /* todo do readonly fields need setting at all? */ ++ p->type = port->type; ++ p->index = port->index; ++ p->index_all = 0; ++ p->is_enabled = port->enabled; ++ p->buffer_num_min = port->minimum_buffer.num; ++ p->buffer_size_min = port->minimum_buffer.size; ++ p->buffer_alignment_min = port->minimum_buffer.alignment; ++ p->buffer_num_recommended = port->recommended_buffer.num; ++ p->buffer_size_recommended = port->recommended_buffer.size; ++ ++ /* only three writable fields in a port */ ++ p->buffer_num = port->current_buffer.num; ++ p->buffer_size = port->current_buffer.size; ++ p->userdata = (u32)(unsigned long)port; ++} ++ ++static int port_info_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ pr_debug("setting port info port %p\n", port); ++ if (!port) ++ return -1; ++ dump_port_info(port); ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_INFO_SET; ++ ++ m.u.port_info_set.component_handle = port->component->handle; ++ m.u.port_info_set.port_type = port->type; ++ m.u.port_info_set.port_index = port->index; ++ ++ port_to_mmal_msg(port, &m.u.port_info_set.port); ++ ++ /* elementary stream format setup */ ++ m.u.port_info_set.format.type = port->format.type; ++ m.u.port_info_set.format.encoding = port->format.encoding; ++ m.u.port_info_set.format.encoding_variant = ++ port->format.encoding_variant; ++ m.u.port_info_set.format.bitrate = port->format.bitrate; ++ m.u.port_info_set.format.flags = port->format.flags; ++ ++ memcpy(&m.u.port_info_set.es, &port->es, ++ sizeof(union mmal_es_specific_format)); ++ ++ m.u.port_info_set.format.extradata_size = port->format.extradata_size; ++ memcpy(&m.u.port_info_set.extradata, port->format.extradata, ++ port->format.extradata_size); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_info_set), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_SET) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ /* return operation status */ ++ ret = -rmsg->u.port_info_get_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d\n", __func__, ret, ++ port->component->handle, port->handle); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* use port info get message to retrieve port information */ ++static int port_info_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ /* port info time */ ++ m.h.type = MMAL_MSG_TYPE_PORT_INFO_GET; ++ m.u.port_info_get.component_handle = port->component->handle; ++ m.u.port_info_get.port_type = port->type; ++ m.u.port_info_get.index = port->index; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_info_get), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_GET) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ /* return operation status */ ++ ret = -rmsg->u.port_info_get_reply.status; ++ if (ret != MMAL_MSG_STATUS_SUCCESS) ++ goto release_msg; ++ ++ if (rmsg->u.port_info_get_reply.port.is_enabled == 0) ++ port->enabled = false; ++ else ++ port->enabled = true; ++ ++ /* copy the values out of the message */ ++ port->handle = rmsg->u.port_info_get_reply.port_handle; ++ ++ /* port type and index cached to use on port info set because ++ * it does not use a port handle ++ */ ++ port->type = rmsg->u.port_info_get_reply.port_type; ++ port->index = rmsg->u.port_info_get_reply.port_index; ++ ++ port->minimum_buffer.num = ++ rmsg->u.port_info_get_reply.port.buffer_num_min; ++ port->minimum_buffer.size = ++ rmsg->u.port_info_get_reply.port.buffer_size_min; ++ port->minimum_buffer.alignment = ++ rmsg->u.port_info_get_reply.port.buffer_alignment_min; ++ ++ port->recommended_buffer.alignment = ++ rmsg->u.port_info_get_reply.port.buffer_alignment_min; ++ port->recommended_buffer.num = ++ rmsg->u.port_info_get_reply.port.buffer_num_recommended; ++ ++ port->current_buffer.num = rmsg->u.port_info_get_reply.port.buffer_num; ++ port->current_buffer.size = ++ rmsg->u.port_info_get_reply.port.buffer_size; ++ ++ /* stream format */ ++ port->format.type = rmsg->u.port_info_get_reply.format.type; ++ port->format.encoding = rmsg->u.port_info_get_reply.format.encoding; ++ port->format.encoding_variant = ++ rmsg->u.port_info_get_reply.format.encoding_variant; ++ port->format.bitrate = rmsg->u.port_info_get_reply.format.bitrate; ++ port->format.flags = rmsg->u.port_info_get_reply.format.flags; ++ ++ /* elementary stream format */ ++ memcpy(&port->es, ++ &rmsg->u.port_info_get_reply.es, ++ sizeof(union mmal_es_specific_format)); ++ port->format.es = &port->es; ++ ++ port->format.extradata_size = ++ rmsg->u.port_info_get_reply.format.extradata_size; ++ memcpy(port->format.extradata, ++ rmsg->u.port_info_get_reply.extradata, ++ port->format.extradata_size); ++ ++ pr_debug("received port info\n"); ++ dump_port_info(port); ++ ++release_msg: ++ ++ pr_debug("%s:result:%d component:0x%x port:%d\n", ++ __func__, ret, port->component->handle, port->handle); ++ ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* create comonent on vc */ ++static int create_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component, ++ const char *name) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ /* build component create message */ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE; ++ m.u.component_create.client_component = (u32)(unsigned long)component; ++ strncpy(m.u.component_create.name, name, ++ sizeof(m.u.component_create.name)); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_create), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_create_reply.status; ++ if (ret != MMAL_MSG_STATUS_SUCCESS) ++ goto release_msg; ++ ++ /* a valid component response received */ ++ component->handle = rmsg->u.component_create_reply.component_handle; ++ component->inputs = rmsg->u.component_create_reply.input_num; ++ component->outputs = rmsg->u.component_create_reply.output_num; ++ component->clocks = rmsg->u.component_create_reply.clock_num; ++ ++ pr_debug("Component handle:0x%x in:%d out:%d clock:%d\n", ++ component->handle, ++ component->inputs, component->outputs, component->clocks); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* destroys a component on vc */ ++static int destroy_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_DESTROY; ++ m.u.component_destroy.component_handle = component->handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_destroy), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_destroy_reply.status; ++ ++release_msg: ++ ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* enable a component on vc */ ++static int enable_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_ENABLE; ++ m.u.component_enable.component_handle = component->handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_enable), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_enable_reply.status; ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* disable a component on vc */ ++static int disable_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_DISABLE; ++ m.u.component_disable.component_handle = component->handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_disable), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_disable_reply.status; ++ ++release_msg: ++ ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* get version of mmal implementation */ ++static int get_version(struct vchiq_mmal_instance *instance, ++ u32 *major_out, u32 *minor_out) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_GET_VERSION; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.version), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ *major_out = rmsg->u.version.major; ++ *minor_out = rmsg->u.version.minor; ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* do a port action with a port as a parameter */ ++static int port_action_port(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ enum mmal_msg_port_action_type action_type) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; ++ m.u.port_action_port.component_handle = port->component->handle; ++ m.u.port_action_port.port_handle = port->handle; ++ m.u.port_action_port.action = action_type; ++ ++ port_to_mmal_msg(port, &m.u.port_action_port.port); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_action_port), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_action_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)\n", ++ __func__, ++ ret, port->component->handle, port->handle, ++ port_action_type_names[action_type], action_type); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* do a port action with handles as parameters */ ++static int port_action_handle(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ enum mmal_msg_port_action_type action_type, ++ u32 connect_component_handle, ++ u32 connect_port_handle) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; ++ ++ m.u.port_action_handle.component_handle = port->component->handle; ++ m.u.port_action_handle.port_handle = port->handle; ++ m.u.port_action_handle.action = action_type; ++ ++ m.u.port_action_handle.connect_component_handle = ++ connect_component_handle; ++ m.u.port_action_handle.connect_port_handle = connect_port_handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_action_handle), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_action_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d) connect component:0x%x connect port:%d\n", ++ __func__, ++ ret, port->component->handle, port->handle, ++ port_action_type_names[action_type], ++ action_type, connect_component_handle, connect_port_handle); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++static int port_parameter_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter_id, void *value, u32 value_size) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_SET; ++ ++ m.u.port_parameter_set.component_handle = port->component->handle; ++ m.u.port_parameter_set.port_handle = port->handle; ++ m.u.port_parameter_set.id = parameter_id; ++ m.u.port_parameter_set.size = (2 * sizeof(u32)) + value_size; ++ memcpy(&m.u.port_parameter_set.value, value, value_size); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ (4 * sizeof(u32)) + value_size, ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_SET) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_parameter_set_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", ++ __func__, ++ ret, port->component->handle, port->handle, parameter_id); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++static int port_parameter_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter_id, void *value, u32 *value_size) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_GET; ++ ++ m.u.port_parameter_get.component_handle = port->component->handle; ++ m.u.port_parameter_get.port_handle = port->handle; ++ m.u.port_parameter_get.id = parameter_id; ++ m.u.port_parameter_get.size = (2 * sizeof(u32)) + *value_size; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(struct ++ mmal_msg_port_parameter_get), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_GET) { ++ /* got an unexpected message type in reply */ ++ pr_err("Incorrect reply type %d\n", rmsg->h.type); ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_parameter_get_reply.status; ++ /* port_parameter_get_reply.size includes the header, ++ * whilst *value_size doesn't. ++ */ ++ rmsg->u.port_parameter_get_reply.size -= (2 * sizeof(u32)); ++ ++ if (ret || rmsg->u.port_parameter_get_reply.size > *value_size) { ++ /* Copy only as much as we have space for ++ * but report true size of parameter ++ */ ++ memcpy(value, &rmsg->u.port_parameter_get_reply.value, ++ *value_size); ++ *value_size = rmsg->u.port_parameter_get_reply.size; ++ } else { ++ memcpy(value, &rmsg->u.port_parameter_get_reply.value, ++ rmsg->u.port_parameter_get_reply.size); ++ } ++ ++ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, ++ ret, port->component->handle, port->handle, parameter_id); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* disables a port and drains buffers from it */ ++static int port_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct list_head *q, *buf_head; ++ unsigned long flags = 0; ++ ++ if (!port->enabled) ++ return 0; ++ ++ port->enabled = false; ++ ++ ret = port_action_port(instance, port, ++ MMAL_MSG_PORT_ACTION_TYPE_DISABLE); ++ if (ret == 0) { ++ /* ++ * Drain all queued buffers on port. This should only ++ * apply to buffers that have been queued before the port ++ * has been enabled. If the port has been enabled and buffers ++ * passed, then the buffers should have been removed from this ++ * list, and we should get the relevant callbacks via VCHIQ ++ * to release the buffers. ++ */ ++ spin_lock_irqsave(&port->slock, flags); ++ ++ list_for_each_safe(buf_head, q, &port->buffers) { ++ struct mmal_buffer *mmalbuf; ++ ++ mmalbuf = list_entry(buf_head, struct mmal_buffer, ++ list); ++ list_del(buf_head); ++ if (port->buffer_cb) ++ port->buffer_cb(instance, ++ port, 0, mmalbuf, 0, 0, ++ MMAL_TIME_UNKNOWN, ++ MMAL_TIME_UNKNOWN); ++ } ++ ++ spin_unlock_irqrestore(&port->slock, flags); ++ ++ ret = port_info_get(instance, port); ++ } ++ ++ return ret; ++} ++ ++/* enable a port */ ++static int port_enable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ unsigned int hdr_count; ++ struct list_head *q, *buf_head; ++ int ret; ++ ++ if (port->enabled) ++ return 0; ++ ++ ret = port_action_port(instance, port, ++ MMAL_MSG_PORT_ACTION_TYPE_ENABLE); ++ if (ret) ++ goto done; ++ ++ port->enabled = true; ++ ++ if (port->buffer_cb) { ++ /* send buffer headers to videocore */ ++ hdr_count = 1; ++ list_for_each_safe(buf_head, q, &port->buffers) { ++ struct mmal_buffer *mmalbuf; ++ ++ mmalbuf = list_entry(buf_head, struct mmal_buffer, ++ list); ++ ret = buffer_from_host(instance, port, mmalbuf); ++ if (ret) ++ goto done; ++ ++ list_del(buf_head); ++ hdr_count++; ++ if (hdr_count > port->current_buffer.num) ++ break; ++ } ++ } ++ ++ ret = port_info_get(instance, port); ++ ++done: ++ return ret; ++} ++ ++/* ------------------------------------------------------------------ ++ * Exported API ++ *------------------------------------------------------------------ ++ */ ++ ++int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = port_info_set(instance, port); ++ if (ret) ++ goto release_unlock; ++ ++ /* read what has actually been set */ ++ ret = port_info_get(instance, port); ++ ++release_unlock: ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_port_set_format); ++ ++int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, void *value, u32 value_size) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = port_parameter_set(instance, port, parameter, value, value_size); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_port_parameter_set); ++ ++int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, void *value, u32 *value_size) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = port_parameter_get(instance, port, parameter, value, value_size); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_port_parameter_get); ++ ++/* enable a port ++ * ++ * enables a port and queues buffers for satisfying callbacks if we ++ * provide a callback handler ++ */ ++int vchiq_mmal_port_enable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ vchiq_mmal_buffer_cb buffer_cb) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ /* already enabled - noop */ ++ if (port->enabled) { ++ ret = 0; ++ goto unlock; ++ } ++ ++ port->buffer_cb = buffer_cb; ++ ++ ret = port_enable(instance, port); ++ ++unlock: ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_port_enable); ++ ++int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (!port->enabled) { ++ mutex_unlock(&instance->vchiq_mutex); ++ return 0; ++ } ++ ++ ret = port_disable(instance, port); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_port_disable); ++ ++/* ports will be connected in a tunneled manner so data buffers ++ * are not handled by client. ++ */ ++int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *src, ++ struct vchiq_mmal_port *dst) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ /* disconnect ports if connected */ ++ if (src->connected) { ++ ret = port_disable(instance, src); ++ if (ret) { ++ pr_err("failed disabling src port(%d)\n", ret); ++ goto release_unlock; ++ } ++ ++ /* do not need to disable the destination port as they ++ * are connected and it is done automatically ++ */ ++ ++ ret = port_action_handle(instance, src, ++ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, ++ src->connected->component->handle, ++ src->connected->handle); ++ if (ret < 0) { ++ pr_err("failed disconnecting src port\n"); ++ goto release_unlock; ++ } ++ src->connected->enabled = false; ++ src->connected = NULL; ++ } ++ ++ if (!dst) { ++ /* do not make new connection */ ++ ret = 0; ++ pr_debug("not making new connection\n"); ++ goto release_unlock; ++ } ++ ++ /* copy src port format to dst */ ++ dst->format.encoding = src->format.encoding; ++ dst->es.video.width = src->es.video.width; ++ dst->es.video.height = src->es.video.height; ++ dst->es.video.crop.x = src->es.video.crop.x; ++ dst->es.video.crop.y = src->es.video.crop.y; ++ dst->es.video.crop.width = src->es.video.crop.width; ++ dst->es.video.crop.height = src->es.video.crop.height; ++ dst->es.video.frame_rate.num = src->es.video.frame_rate.num; ++ dst->es.video.frame_rate.den = src->es.video.frame_rate.den; ++ ++ /* set new format */ ++ ret = port_info_set(instance, dst); ++ if (ret) { ++ pr_debug("setting port info failed\n"); ++ goto release_unlock; ++ } ++ ++ /* read what has actually been set */ ++ ret = port_info_get(instance, dst); ++ if (ret) { ++ pr_debug("read back port info failed\n"); ++ goto release_unlock; ++ } ++ ++ /* connect two ports together */ ++ ret = port_action_handle(instance, src, ++ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, ++ dst->component->handle, dst->handle); ++ if (ret < 0) { ++ pr_debug("connecting port %d:%d to %d:%d failed\n", ++ src->component->handle, src->handle, ++ dst->component->handle, dst->handle); ++ goto release_unlock; ++ } ++ src->connected = dst; ++ ++release_unlock: ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_port_connect_tunnel); ++ ++int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ struct mmal_buffer *buffer) ++{ ++ unsigned long flags = 0; ++ int ret; ++ ++ ret = buffer_from_host(instance, port, buffer); ++ if (ret == -EINVAL) { ++ /* Port is disabled. Queue for when it is enabled. */ ++ spin_lock_irqsave(&port->slock, flags); ++ list_add_tail(&buffer->list, &port->buffers); ++ spin_unlock_irqrestore(&port->slock, flags); ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_submit_buffer); ++ ++int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, ++ struct mmal_buffer *buf) ++{ ++ struct mmal_msg_context *msg_context = get_msg_context(instance); ++ ++ if (IS_ERR(msg_context)) ++ return (PTR_ERR(msg_context)); ++ ++ buf->msg_context = msg_context; ++ return 0; ++} ++EXPORT_SYMBOL_GPL(mmal_vchi_buffer_init); ++ ++int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf) ++{ ++ struct mmal_msg_context *msg_context = buf->msg_context; ++ ++ if (msg_context) ++ release_msg_context(msg_context); ++ buf->msg_context = NULL; ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(mmal_vchi_buffer_cleanup); ++ ++/* Initialise a mmal component and its ports ++ * ++ */ ++int vchiq_mmal_component_init(struct vchiq_mmal_instance *instance, ++ const char *name, ++ struct vchiq_mmal_component **component_out) ++{ ++ int ret; ++ int idx; /* port index */ ++ struct vchiq_mmal_component *component; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) { ++ ret = -EINVAL; /* todo is this correct error? */ ++ goto unlock; ++ } ++ ++ component = &instance->component[instance->component_idx]; ++ ++ ret = create_component(instance, component, name); ++ if (ret < 0) { ++ pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", ++ __func__, ret); ++ goto unlock; ++ } ++ ++ /* ports info needs gathering */ ++ component->control.type = MMAL_PORT_TYPE_CONTROL; ++ component->control.index = 0; ++ component->control.component = component; ++ spin_lock_init(&component->control.slock); ++ INIT_LIST_HEAD(&component->control.buffers); ++ ret = port_info_get(instance, &component->control); ++ if (ret < 0) ++ goto release_component; ++ ++ for (idx = 0; idx < component->inputs; idx++) { ++ component->input[idx].type = MMAL_PORT_TYPE_INPUT; ++ component->input[idx].index = idx; ++ component->input[idx].component = component; ++ spin_lock_init(&component->input[idx].slock); ++ INIT_LIST_HEAD(&component->input[idx].buffers); ++ ret = port_info_get(instance, &component->input[idx]); ++ if (ret < 0) ++ goto release_component; ++ } ++ ++ for (idx = 0; idx < component->outputs; idx++) { ++ component->output[idx].type = MMAL_PORT_TYPE_OUTPUT; ++ component->output[idx].index = idx; ++ component->output[idx].component = component; ++ spin_lock_init(&component->output[idx].slock); ++ INIT_LIST_HEAD(&component->output[idx].buffers); ++ ret = port_info_get(instance, &component->output[idx]); ++ if (ret < 0) ++ goto release_component; ++ } ++ ++ for (idx = 0; idx < component->clocks; idx++) { ++ component->clock[idx].type = MMAL_PORT_TYPE_CLOCK; ++ component->clock[idx].index = idx; ++ component->clock[idx].component = component; ++ spin_lock_init(&component->clock[idx].slock); ++ INIT_LIST_HEAD(&component->clock[idx].buffers); ++ ret = port_info_get(instance, &component->clock[idx]); ++ if (ret < 0) ++ goto release_component; ++ } ++ ++ instance->component_idx++; ++ ++ *component_out = component; ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return 0; ++ ++release_component: ++ destroy_component(instance, component); ++unlock: ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_component_init); ++ ++/* ++ * cause a mmal component to be destroyed ++ */ ++int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (component->enabled) ++ ret = disable_component(instance, component); ++ ++ ret = destroy_component(instance, component); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_component_finalise); ++ ++/* ++ * cause a mmal component to be enabled ++ */ ++int vchiq_mmal_component_enable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (component->enabled) { ++ mutex_unlock(&instance->vchiq_mutex); ++ return 0; ++ } ++ ++ ret = enable_component(instance, component); ++ if (ret == 0) ++ component->enabled = true; ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_component_enable); ++ ++/* ++ * cause a mmal component to be enabled ++ */ ++int vchiq_mmal_component_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (!component->enabled) { ++ mutex_unlock(&instance->vchiq_mutex); ++ return 0; ++ } ++ ++ ret = disable_component(instance, component); ++ if (ret == 0) ++ component->enabled = false; ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_component_disable); ++ ++int vchiq_mmal_version(struct vchiq_mmal_instance *instance, ++ u32 *major_out, u32 *minor_out) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = get_version(instance, major_out, minor_out); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_version); ++ ++int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance) ++{ ++ int status = 0; ++ ++ if (!instance) ++ return -EINVAL; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ vchi_service_use(instance->handle); ++ ++ status = vchi_service_close(instance->handle); ++ if (status != 0) ++ pr_err("mmal-vchiq: VCHIQ close failed\n"); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ flush_workqueue(instance->bulk_wq); ++ destroy_workqueue(instance->bulk_wq); ++ ++ vfree(instance->bulk_scratch); ++ ++ idr_destroy(&instance->context_map); ++ ++ kfree(instance); ++ ++ return status; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_finalise); ++ ++int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance) ++{ ++ int status; ++ struct vchiq_mmal_instance *instance; ++ static VCHI_CONNECTION_T *vchi_connection; ++ static VCHI_INSTANCE_T vchi_instance; ++ SERVICE_CREATION_T params = { ++ .version = VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER), ++ .service_id = VC_MMAL_SERVER_NAME, ++ .connection = vchi_connection, ++ .rx_fifo_size = 0, ++ .tx_fifo_size = 0, ++ .callback = service_callback, ++ .callback_param = NULL, ++ .want_unaligned_bulk_rx = 1, ++ .want_unaligned_bulk_tx = 1, ++ .want_crc = 0 ++ }; ++ ++ /* compile time checks to ensure structure size as they are ++ * directly (de)serialised from memory. ++ */ ++ ++ /* ensure the header structure has packed to the correct size */ ++ BUILD_BUG_ON(sizeof(struct mmal_msg_header) != 24); ++ ++ /* ensure message structure does not exceed maximum length */ ++ BUILD_BUG_ON(sizeof(struct mmal_msg) > MMAL_MSG_MAX_SIZE); ++ ++ /* mmal port struct is correct size */ ++ BUILD_BUG_ON(sizeof(struct mmal_port) != 64); ++ ++ /* create a vchi instance */ ++ status = vchi_initialise(&vchi_instance); ++ if (status) { ++ pr_err("Failed to initialise VCHI instance (status=%d)\n", ++ status); ++ return -EIO; ++ } ++ ++ status = vchi_connect(NULL, 0, vchi_instance); ++ if (status) { ++ pr_err("Failed to connect VCHI instance (status=%d)\n", status); ++ return -EIO; ++ } ++ ++ instance = kzalloc(sizeof(*instance), GFP_KERNEL); ++ ++ if (!instance) ++ return -ENOMEM; ++ ++ mutex_init(&instance->vchiq_mutex); ++ ++ instance->bulk_scratch = vmalloc(PAGE_SIZE); ++ ++ mutex_init(&instance->context_map_lock); ++ idr_init_base(&instance->context_map, 1); ++ ++ params.callback_param = instance; ++ ++ instance->bulk_wq = alloc_ordered_workqueue("mmal-vchiq", ++ WQ_MEM_RECLAIM); ++ if (!instance->bulk_wq) ++ goto err_free; ++ ++ status = vchi_service_open(vchi_instance, ¶ms, &instance->handle); ++ if (status) { ++ pr_err("Failed to open VCHI service connection (status=%d)\n", ++ status); ++ goto err_close_services; ++ } ++ ++ vchi_service_release(instance->handle); ++ ++ *out_instance = instance; ++ ++ return 0; ++ ++err_close_services: ++ vchi_service_close(instance->handle); ++ destroy_workqueue(instance->bulk_wq); ++err_free: ++ vfree(instance->bulk_scratch); ++ kfree(instance); ++ return -ENODEV; ++} ++EXPORT_SYMBOL_GPL(vchiq_mmal_init); +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h ++++ /dev/null +@@ -1,61 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0 */ +-/* +- * Broadcom BM2835 V4L2 driver +- * +- * Copyright © 2013 Raspberry Pi (Trading) Ltd. +- * +- * Authors: Vincent Sanders @ Collabora +- * Dave Stevenson @ Broadcom +- * (now dave.stevenson@raspberrypi.org) +- * Simon Mellor @ Broadcom +- * Luke Diamand @ Broadcom +- * +- * MMAL structures +- * +- */ +-#ifndef MMAL_COMMON_H +-#define MMAL_COMMON_H +- +-#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) +-#define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l') +- +-/** Special value signalling that time is not known */ +-#define MMAL_TIME_UNKNOWN BIT_ULL(63) +- +-struct mmal_msg_context; +- +-/* mapping between v4l and mmal video modes */ +-struct mmal_fmt { +- char *name; +- u32 fourcc; /* v4l2 format id */ +- int flags; /* v4l2 flags field */ +- u32 mmal; +- int depth; +- u32 mmal_component; /* MMAL component index to be used to encode */ +- u32 ybbp; /* depth of first Y plane for planar formats */ +- bool remove_padding; /* Does the GPU have to remove padding, +- * or can we do hide padding via bytesperline. +- */ +-}; +- +-/* buffer for one video frame */ +-struct mmal_buffer { +- /* v4l buffer data -- must be first */ +- struct vb2_v4l2_buffer vb; +- +- /* list of buffers available */ +- struct list_head list; +- +- void *buffer; /* buffer pointer */ +- unsigned long buffer_size; /* size of allocated buffer */ +- +- struct mmal_msg_context *msg_context; +-}; +- +-/* */ +-struct mmal_colourfx { +- s32 enable; +- u32 u; +- u32 v; +-}; +-#endif +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-encodings.h ++++ /dev/null +@@ -1,124 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0 */ +-/* +- * Broadcom BM2835 V4L2 driver +- * +- * Copyright © 2013 Raspberry Pi (Trading) Ltd. +- * +- * Authors: Vincent Sanders @ Collabora +- * Dave Stevenson @ Broadcom +- * (now dave.stevenson@raspberrypi.org) +- * Simon Mellor @ Broadcom +- * Luke Diamand @ Broadcom +- */ +-#ifndef MMAL_ENCODINGS_H +-#define MMAL_ENCODINGS_H +- +-#define MMAL_ENCODING_H264 MMAL_FOURCC('H', '2', '6', '4') +-#define MMAL_ENCODING_H263 MMAL_FOURCC('H', '2', '6', '3') +-#define MMAL_ENCODING_MP4V MMAL_FOURCC('M', 'P', '4', 'V') +-#define MMAL_ENCODING_MP2V MMAL_FOURCC('M', 'P', '2', 'V') +-#define MMAL_ENCODING_MP1V MMAL_FOURCC('M', 'P', '1', 'V') +-#define MMAL_ENCODING_WMV3 MMAL_FOURCC('W', 'M', 'V', '3') +-#define MMAL_ENCODING_WMV2 MMAL_FOURCC('W', 'M', 'V', '2') +-#define MMAL_ENCODING_WMV1 MMAL_FOURCC('W', 'M', 'V', '1') +-#define MMAL_ENCODING_WVC1 MMAL_FOURCC('W', 'V', 'C', '1') +-#define MMAL_ENCODING_VP8 MMAL_FOURCC('V', 'P', '8', ' ') +-#define MMAL_ENCODING_VP7 MMAL_FOURCC('V', 'P', '7', ' ') +-#define MMAL_ENCODING_VP6 MMAL_FOURCC('V', 'P', '6', ' ') +-#define MMAL_ENCODING_THEORA MMAL_FOURCC('T', 'H', 'E', 'O') +-#define MMAL_ENCODING_SPARK MMAL_FOURCC('S', 'P', 'R', 'K') +-#define MMAL_ENCODING_MJPEG MMAL_FOURCC('M', 'J', 'P', 'G') +- +-#define MMAL_ENCODING_JPEG MMAL_FOURCC('J', 'P', 'E', 'G') +-#define MMAL_ENCODING_GIF MMAL_FOURCC('G', 'I', 'F', ' ') +-#define MMAL_ENCODING_PNG MMAL_FOURCC('P', 'N', 'G', ' ') +-#define MMAL_ENCODING_PPM MMAL_FOURCC('P', 'P', 'M', ' ') +-#define MMAL_ENCODING_TGA MMAL_FOURCC('T', 'G', 'A', ' ') +-#define MMAL_ENCODING_BMP MMAL_FOURCC('B', 'M', 'P', ' ') +- +-#define MMAL_ENCODING_I420 MMAL_FOURCC('I', '4', '2', '0') +-#define MMAL_ENCODING_I420_SLICE MMAL_FOURCC('S', '4', '2', '0') +-#define MMAL_ENCODING_YV12 MMAL_FOURCC('Y', 'V', '1', '2') +-#define MMAL_ENCODING_I422 MMAL_FOURCC('I', '4', '2', '2') +-#define MMAL_ENCODING_I422_SLICE MMAL_FOURCC('S', '4', '2', '2') +-#define MMAL_ENCODING_YUYV MMAL_FOURCC('Y', 'U', 'Y', 'V') +-#define MMAL_ENCODING_YVYU MMAL_FOURCC('Y', 'V', 'Y', 'U') +-#define MMAL_ENCODING_UYVY MMAL_FOURCC('U', 'Y', 'V', 'Y') +-#define MMAL_ENCODING_VYUY MMAL_FOURCC('V', 'Y', 'U', 'Y') +-#define MMAL_ENCODING_NV12 MMAL_FOURCC('N', 'V', '1', '2') +-#define MMAL_ENCODING_NV21 MMAL_FOURCC('N', 'V', '2', '1') +-#define MMAL_ENCODING_ARGB MMAL_FOURCC('A', 'R', 'G', 'B') +-#define MMAL_ENCODING_RGBA MMAL_FOURCC('R', 'G', 'B', 'A') +-#define MMAL_ENCODING_ABGR MMAL_FOURCC('A', 'B', 'G', 'R') +-#define MMAL_ENCODING_BGRA MMAL_FOURCC('B', 'G', 'R', 'A') +-#define MMAL_ENCODING_RGB16 MMAL_FOURCC('R', 'G', 'B', '2') +-#define MMAL_ENCODING_RGB24 MMAL_FOURCC('R', 'G', 'B', '3') +-#define MMAL_ENCODING_RGB32 MMAL_FOURCC('R', 'G', 'B', '4') +-#define MMAL_ENCODING_BGR16 MMAL_FOURCC('B', 'G', 'R', '2') +-#define MMAL_ENCODING_BGR24 MMAL_FOURCC('B', 'G', 'R', '3') +-#define MMAL_ENCODING_BGR32 MMAL_FOURCC('B', 'G', 'R', '4') +- +-/** SAND Video (YUVUV128) format, native format understood by VideoCore. +- * This format is *not* opaque - if requested you will receive full frames +- * of YUV_UV video. +- */ +-#define MMAL_ENCODING_YUVUV128 MMAL_FOURCC('S', 'A', 'N', 'D') +- +-/** VideoCore opaque image format, image handles are returned to +- * the host but not the actual image data. +- */ +-#define MMAL_ENCODING_OPAQUE MMAL_FOURCC('O', 'P', 'Q', 'V') +- +-/** An EGL image handle +- */ +-#define MMAL_ENCODING_EGL_IMAGE MMAL_FOURCC('E', 'G', 'L', 'I') +- +-/* }@ */ +- +-/** \name Pre-defined audio encodings */ +-/* @{ */ +-#define MMAL_ENCODING_PCM_UNSIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'U') +-#define MMAL_ENCODING_PCM_UNSIGNED_LE MMAL_FOURCC('p', 'c', 'm', 'u') +-#define MMAL_ENCODING_PCM_SIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'S') +-#define MMAL_ENCODING_PCM_SIGNED_LE MMAL_FOURCC('p', 'c', 'm', 's') +-#define MMAL_ENCODING_PCM_FLOAT_BE MMAL_FOURCC('P', 'C', 'M', 'F') +-#define MMAL_ENCODING_PCM_FLOAT_LE MMAL_FOURCC('p', 'c', 'm', 'f') +- +-/* Pre-defined H264 encoding variants */ +- +-/** ISO 14496-10 Annex B byte stream format */ +-#define MMAL_ENCODING_VARIANT_H264_DEFAULT 0 +-/** ISO 14496-15 AVC stream format */ +-#define MMAL_ENCODING_VARIANT_H264_AVC1 MMAL_FOURCC('A', 'V', 'C', '1') +-/** Implicitly delineated NAL units without emulation prevention */ +-#define MMAL_ENCODING_VARIANT_H264_RAW MMAL_FOURCC('R', 'A', 'W', ' ') +- +-/** \defgroup MmalColorSpace List of pre-defined video color spaces +- * This defines a list of common color spaces. This list isn't exhaustive and +- * is only provided as a convenience to avoid clients having to use FourCC +- * codes directly. However components are allowed to define and use their own +- * FourCC codes. +- */ +-/* @{ */ +- +-/** Unknown color space */ +-#define MMAL_COLOR_SPACE_UNKNOWN 0 +-/** ITU-R BT.601-5 [SDTV] */ +-#define MMAL_COLOR_SPACE_ITUR_BT601 MMAL_FOURCC('Y', '6', '0', '1') +-/** ITU-R BT.709-3 [HDTV] */ +-#define MMAL_COLOR_SPACE_ITUR_BT709 MMAL_FOURCC('Y', '7', '0', '9') +-/** JPEG JFIF */ +-#define MMAL_COLOR_SPACE_JPEG_JFIF MMAL_FOURCC('Y', 'J', 'F', 'I') +-/** Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ +-#define MMAL_COLOR_SPACE_FCC MMAL_FOURCC('Y', 'F', 'C', 'C') +-/** Society of Motion Picture and Television Engineers 240M (1999) */ +-#define MMAL_COLOR_SPACE_SMPTE240M MMAL_FOURCC('Y', '2', '4', '0') +-/** ITU-R BT.470-2 System M */ +-#define MMAL_COLOR_SPACE_BT470_2_M MMAL_FOURCC('Y', '_', '_', 'M') +-/** ITU-R BT.470-2 System BG */ +-#define MMAL_COLOR_SPACE_BT470_2_BG MMAL_FOURCC('Y', '_', 'B', 'G') +-/** JPEG JFIF, but with 16..255 luma */ +-#define MMAL_COLOR_SPACE_JFIF_Y16_255 MMAL_FOURCC('Y', 'Y', '1', '6') +-/* @} MmalColorSpace List */ +- +-#endif /* MMAL_ENCODINGS_H */ +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-common.h ++++ /dev/null +@@ -1,48 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0 */ +-/* +- * Broadcom BM2835 V4L2 driver +- * +- * Copyright © 2013 Raspberry Pi (Trading) Ltd. +- * +- * Authors: Vincent Sanders @ Collabora +- * Dave Stevenson @ Broadcom +- * (now dave.stevenson@raspberrypi.org) +- * Simon Mellor @ Broadcom +- * Luke Diamand @ Broadcom +- */ +- +-#ifndef MMAL_MSG_COMMON_H +-#define MMAL_MSG_COMMON_H +- +-enum mmal_msg_status { +- MMAL_MSG_STATUS_SUCCESS = 0, /**< Success */ +- MMAL_MSG_STATUS_ENOMEM, /**< Out of memory */ +- MMAL_MSG_STATUS_ENOSPC, /**< Out of resources other than memory */ +- MMAL_MSG_STATUS_EINVAL, /**< Argument is invalid */ +- MMAL_MSG_STATUS_ENOSYS, /**< Function not implemented */ +- MMAL_MSG_STATUS_ENOENT, /**< No such file or directory */ +- MMAL_MSG_STATUS_ENXIO, /**< No such device or address */ +- MMAL_MSG_STATUS_EIO, /**< I/O error */ +- MMAL_MSG_STATUS_ESPIPE, /**< Illegal seek */ +- MMAL_MSG_STATUS_ECORRUPT, /**< Data is corrupt \attention */ +- MMAL_MSG_STATUS_ENOTREADY, /**< Component is not ready */ +- MMAL_MSG_STATUS_ECONFIG, /**< Component is not configured */ +- MMAL_MSG_STATUS_EISCONN, /**< Port is already connected */ +- MMAL_MSG_STATUS_ENOTCONN, /**< Port is disconnected */ +- MMAL_MSG_STATUS_EAGAIN, /**< Resource temporarily unavailable. */ +- MMAL_MSG_STATUS_EFAULT, /**< Bad address */ +-}; +- +-struct mmal_rect { +- s32 x; /**< x coordinate (from left) */ +- s32 y; /**< y coordinate (from top) */ +- s32 width; /**< width */ +- s32 height; /**< height */ +-}; +- +-struct mmal_rational { +- s32 num; /**< Numerator */ +- s32 den; /**< Denominator */ +-}; +- +-#endif /* MMAL_MSG_COMMON_H */ +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h ++++ /dev/null +@@ -1,106 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0 */ +-/* +- * Broadcom BM2835 V4L2 driver +- * +- * Copyright © 2013 Raspberry Pi (Trading) Ltd. +- * +- * Authors: Vincent Sanders @ Collabora +- * Dave Stevenson @ Broadcom +- * (now dave.stevenson@raspberrypi.org) +- * Simon Mellor @ Broadcom +- * Luke Diamand @ Broadcom +- */ +- +-#ifndef MMAL_MSG_FORMAT_H +-#define MMAL_MSG_FORMAT_H +- +-#include "mmal-msg-common.h" +- +-/* MMAL_ES_FORMAT_T */ +- +-struct mmal_audio_format { +- u32 channels; /* Number of audio channels */ +- u32 sample_rate; /* Sample rate */ +- +- u32 bits_per_sample; /* Bits per sample */ +- u32 block_align; /* Size of a block of data */ +-}; +- +-struct mmal_video_format { +- u32 width; /* Width of frame in pixels */ +- u32 height; /* Height of frame in rows of pixels */ +- struct mmal_rect crop; /* Visible region of the frame */ +- struct mmal_rational frame_rate; /* Frame rate */ +- struct mmal_rational par; /* Pixel aspect ratio */ +- +- /* +- * FourCC specifying the color space of the video stream. See the +- * MmalColorSpace "pre-defined color spaces" for some examples. +- */ +- u32 color_space; +-}; +- +-struct mmal_subpicture_format { +- u32 x_offset; +- u32 y_offset; +-}; +- +-union mmal_es_specific_format { +- struct mmal_audio_format audio; +- struct mmal_video_format video; +- struct mmal_subpicture_format subpicture; +-}; +- +-/* Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ +-struct mmal_es_format_local { +- u32 type; /* enum mmal_es_type */ +- +- u32 encoding; /* FourCC specifying encoding of the elementary +- * stream. +- */ +- u32 encoding_variant; /* FourCC specifying the specific +- * encoding variant of the elementary +- * stream. +- */ +- +- union mmal_es_specific_format *es; /* Type specific +- * information for the +- * elementary stream +- */ +- +- u32 bitrate; /* Bitrate in bits per second */ +- u32 flags; /* Flags describing properties of the elementary +- * stream. +- */ +- +- u32 extradata_size; /* Size of the codec specific data */ +- u8 *extradata; /* Codec specific data */ +-}; +- +-/* Remote definition of an elementary stream format (MMAL_ES_FORMAT_T) */ +-struct mmal_es_format { +- u32 type; /* enum mmal_es_type */ +- +- u32 encoding; /* FourCC specifying encoding of the elementary +- * stream. +- */ +- u32 encoding_variant; /* FourCC specifying the specific +- * encoding variant of the elementary +- * stream. +- */ +- +- u32 es; /* Type specific +- * information for the +- * elementary stream +- */ +- +- u32 bitrate; /* Bitrate in bits per second */ +- u32 flags; /* Flags describing properties of the elementary +- * stream. +- */ +- +- u32 extradata_size; /* Size of the codec specific data */ +- u32 extradata; /* Codec specific data */ +-}; +- +-#endif /* MMAL_MSG_FORMAT_H */ +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h ++++ /dev/null +@@ -1,109 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0 */ +-/* +- * Broadcom BM2835 V4L2 driver +- * +- * Copyright © 2013 Raspberry Pi (Trading) Ltd. +- * +- * Authors: Vincent Sanders @ Collabora +- * Dave Stevenson @ Broadcom +- * (now dave.stevenson@raspberrypi.org) +- * Simon Mellor @ Broadcom +- * Luke Diamand @ Broadcom +- */ +- +-/* MMAL_PORT_TYPE_T */ +-enum mmal_port_type { +- MMAL_PORT_TYPE_UNKNOWN = 0, /* Unknown port type */ +- MMAL_PORT_TYPE_CONTROL, /* Control port */ +- MMAL_PORT_TYPE_INPUT, /* Input port */ +- MMAL_PORT_TYPE_OUTPUT, /* Output port */ +- MMAL_PORT_TYPE_CLOCK, /* Clock port */ +-}; +- +-/* The port is pass-through and doesn't need buffer headers allocated */ +-#define MMAL_PORT_CAPABILITY_PASSTHROUGH 0x01 +-/* +- *The port wants to allocate the buffer payloads. +- * This signals a preference that payload allocation should be done +- * on this port for efficiency reasons. +- */ +-#define MMAL_PORT_CAPABILITY_ALLOCATION 0x02 +-/* +- * The port supports format change events. +- * This applies to input ports and is used to let the client know +- * whether the port supports being reconfigured via a format +- * change event (i.e. without having to disable the port). +- */ +-#define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE 0x04 +- +-/* +- * mmal port structure (MMAL_PORT_T) +- * +- * most elements are informational only, the pointer values for +- * interogation messages are generally provided as additional +- * structures within the message. When used to set values only the +- * buffer_num, buffer_size and userdata parameters are writable. +- */ +-struct mmal_port { +- u32 priv; /* Private member used by the framework */ +- u32 name; /* Port name. Used for debugging purposes (RO) */ +- +- u32 type; /* Type of the port (RO) enum mmal_port_type */ +- u16 index; /* Index of the port in its type list (RO) */ +- u16 index_all; /* Index of the port in the list of all ports (RO) */ +- +- u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ +- u32 format; /* Format of the elementary stream */ +- +- u32 buffer_num_min; /* Minimum number of buffers the port +- * requires (RO). This is set by the +- * component. +- */ +- +- u32 buffer_size_min; /* Minimum size of buffers the port +- * requires (RO). This is set by the +- * component. +- */ +- +- u32 buffer_alignment_min;/* Minimum alignment requirement for +- * the buffers (RO). A value of +- * zero means no special alignment +- * requirements. This is set by the +- * component. +- */ +- +- u32 buffer_num_recommended; /* Number of buffers the port +- * recommends for optimal +- * performance (RO). A value of +- * zero means no special +- * recommendation. This is set +- * by the component. +- */ +- +- u32 buffer_size_recommended; /* Size of buffers the port +- * recommends for optimal +- * performance (RO). A value of +- * zero means no special +- * recommendation. This is set +- * by the component. +- */ +- +- u32 buffer_num; /* Actual number of buffers the port will use. +- * This is set by the client. +- */ +- +- u32 buffer_size; /* Actual maximum size of the buffers that +- * will be sent to the port. This is set by +- * the client. +- */ +- +- u32 component; /* Component this port belongs to (Read Only) */ +- +- u32 userdata; /* Field reserved for use by the client */ +- +- u32 capabilities; /* Flags describing the capabilities of a +- * port (RO). Bitwise combination of \ref +- * portcapabilities "Port capabilities" +- * values. +- */ +-}; +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h ++++ /dev/null +@@ -1,406 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0 */ +-/* +- * Broadcom BM2835 V4L2 driver +- * +- * Copyright © 2013 Raspberry Pi (Trading) Ltd. +- * +- * Authors: Vincent Sanders @ Collabora +- * Dave Stevenson @ Broadcom +- * (now dave.stevenson@raspberrypi.org) +- * Simon Mellor @ Broadcom +- * Luke Diamand @ Broadcom +- */ +- +-/* +- * all the data structures which serialise the MMAL protocol. note +- * these are directly mapped onto the recived message data. +- * +- * BEWARE: They seem to *assume* pointers are u32 and that there is no +- * structure padding! +- * +- * NOTE: this implementation uses kernel types to ensure sizes. Rather +- * than assigning values to enums to force their size the +- * implementation uses fixed size types and not the enums (though the +- * comments have the actual enum type +- */ +-#ifndef MMAL_MSG_H +-#define MMAL_MSG_H +- +-#define VC_MMAL_VER 15 +-#define VC_MMAL_MIN_VER 10 +-#define VC_MMAL_SERVER_NAME MAKE_FOURCC("mmal") +- +-/* max total message size is 512 bytes */ +-#define MMAL_MSG_MAX_SIZE 512 +-/* with six 32bit header elements max payload is therefore 488 bytes */ +-#define MMAL_MSG_MAX_PAYLOAD 488 +- +-#include "mmal-msg-common.h" +-#include "mmal-msg-format.h" +-#include "mmal-msg-port.h" +- +-enum mmal_msg_type { +- MMAL_MSG_TYPE_QUIT = 1, +- MMAL_MSG_TYPE_SERVICE_CLOSED, +- MMAL_MSG_TYPE_GET_VERSION, +- MMAL_MSG_TYPE_COMPONENT_CREATE, +- MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ +- MMAL_MSG_TYPE_COMPONENT_ENABLE, +- MMAL_MSG_TYPE_COMPONENT_DISABLE, +- MMAL_MSG_TYPE_PORT_INFO_GET, +- MMAL_MSG_TYPE_PORT_INFO_SET, +- MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ +- MMAL_MSG_TYPE_BUFFER_FROM_HOST, +- MMAL_MSG_TYPE_BUFFER_TO_HOST, +- MMAL_MSG_TYPE_GET_STATS, +- MMAL_MSG_TYPE_PORT_PARAMETER_SET, +- MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ +- MMAL_MSG_TYPE_EVENT_TO_HOST, +- MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT, +- MMAL_MSG_TYPE_OPAQUE_ALLOCATOR, +- MMAL_MSG_TYPE_CONSUME_MEM, +- MMAL_MSG_TYPE_LMK, /* 20 */ +- MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC, +- MMAL_MSG_TYPE_DRM_GET_LHS32, +- MMAL_MSG_TYPE_DRM_GET_TIME, +- MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN, +- MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ +- MMAL_MSG_TYPE_HOST_LOG, +- MMAL_MSG_TYPE_MSG_LAST +-}; +- +-/* port action request messages differ depending on the action type */ +-enum mmal_msg_port_action_type { +- MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unknown action */ +- MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ +- MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ +- MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ +- MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ +- MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ +- MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/ +-}; +- +-struct mmal_msg_header { +- u32 magic; +- u32 type; /* enum mmal_msg_type */ +- +- /* Opaque handle to the control service */ +- u32 control_service; +- +- u32 context; /* a u32 per message context */ +- u32 status; /* The status of the vchiq operation */ +- u32 padding; +-}; +- +-/* Send from VC to host to report version */ +-struct mmal_msg_version { +- u32 flags; +- u32 major; +- u32 minor; +- u32 minimum; +-}; +- +-/* request to VC to create component */ +-struct mmal_msg_component_create { +- u32 client_component; /* component context */ +- char name[128]; +- u32 pid; /* For debug */ +-}; +- +-/* reply from VC to component creation request */ +-struct mmal_msg_component_create_reply { +- u32 status; /* enum mmal_msg_status - how does this differ to +- * the one in the header? +- */ +- u32 component_handle; /* VideoCore handle for component */ +- u32 input_num; /* Number of input ports */ +- u32 output_num; /* Number of output ports */ +- u32 clock_num; /* Number of clock ports */ +-}; +- +-/* request to VC to destroy a component */ +-struct mmal_msg_component_destroy { +- u32 component_handle; +-}; +- +-struct mmal_msg_component_destroy_reply { +- u32 status; /* The component destruction status */ +-}; +- +-/* request and reply to VC to enable a component */ +-struct mmal_msg_component_enable { +- u32 component_handle; +-}; +- +-struct mmal_msg_component_enable_reply { +- u32 status; /* The component enable status */ +-}; +- +-/* request and reply to VC to disable a component */ +-struct mmal_msg_component_disable { +- u32 component_handle; +-}; +- +-struct mmal_msg_component_disable_reply { +- u32 status; /* The component disable status */ +-}; +- +-/* request to VC to get port information */ +-struct mmal_msg_port_info_get { +- u32 component_handle; /* component handle port is associated with */ +- u32 port_type; /* enum mmal_msg_port_type */ +- u32 index; /* port index to query */ +-}; +- +-/* reply from VC to get port info request */ +-struct mmal_msg_port_info_get_reply { +- u32 status; /* enum mmal_msg_status */ +- u32 component_handle; /* component handle port is associated with */ +- u32 port_type; /* enum mmal_msg_port_type */ +- u32 port_index; /* port indexed in query */ +- s32 found; /* unused */ +- u32 port_handle; /* Handle to use for this port */ +- struct mmal_port port; +- struct mmal_es_format format; /* elementary stream format */ +- union mmal_es_specific_format es; /* es type specific data */ +- u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; /* es extra data */ +-}; +- +-/* request to VC to set port information */ +-struct mmal_msg_port_info_set { +- u32 component_handle; +- u32 port_type; /* enum mmal_msg_port_type */ +- u32 port_index; /* port indexed in query */ +- struct mmal_port port; +- struct mmal_es_format format; +- union mmal_es_specific_format es; +- u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; +-}; +- +-/* reply from VC to port info set request */ +-struct mmal_msg_port_info_set_reply { +- u32 status; +- u32 component_handle; /* component handle port is associated with */ +- u32 port_type; /* enum mmal_msg_port_type */ +- u32 index; /* port indexed in query */ +- s32 found; /* unused */ +- u32 port_handle; /* Handle to use for this port */ +- struct mmal_port port; +- struct mmal_es_format format; +- union mmal_es_specific_format es; +- u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; +-}; +- +-/* port action requests that take a mmal_port as a parameter */ +-struct mmal_msg_port_action_port { +- u32 component_handle; +- u32 port_handle; +- u32 action; /* enum mmal_msg_port_action_type */ +- struct mmal_port port; +-}; +- +-/* port action requests that take handles as a parameter */ +-struct mmal_msg_port_action_handle { +- u32 component_handle; +- u32 port_handle; +- u32 action; /* enum mmal_msg_port_action_type */ +- u32 connect_component_handle; +- u32 connect_port_handle; +-}; +- +-struct mmal_msg_port_action_reply { +- u32 status; /* The port action operation status */ +-}; +- +-/* MMAL buffer transfer */ +- +-/* Size of space reserved in a buffer message for short messages. */ +-#define MMAL_VC_SHORT_DATA 128 +- +-/* Signals that the current payload is the end of the stream of data */ +-#define MMAL_BUFFER_HEADER_FLAG_EOS BIT(0) +-/* Signals that the start of the current payload starts a frame */ +-#define MMAL_BUFFER_HEADER_FLAG_FRAME_START BIT(1) +-/* Signals that the end of the current payload ends a frame */ +-#define MMAL_BUFFER_HEADER_FLAG_FRAME_END BIT(2) +-/* Signals that the current payload contains only complete frames (>1) */ +-#define MMAL_BUFFER_HEADER_FLAG_FRAME \ +- (MMAL_BUFFER_HEADER_FLAG_FRAME_START | \ +- MMAL_BUFFER_HEADER_FLAG_FRAME_END) +-/* Signals that the current payload is a keyframe (i.e. self decodable) */ +-#define MMAL_BUFFER_HEADER_FLAG_KEYFRAME BIT(3) +-/* +- * Signals a discontinuity in the stream of data (e.g. after a seek). +- * Can be used for instance by a decoder to reset its state +- */ +-#define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY BIT(4) +-/* +- * Signals a buffer containing some kind of config data for the component +- * (e.g. codec config data) +- */ +-#define MMAL_BUFFER_HEADER_FLAG_CONFIG BIT(5) +-/* Signals an encrypted payload */ +-#define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED BIT(6) +-/* Signals a buffer containing side information */ +-#define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO BIT(7) +-/* +- * Signals a buffer which is the snapshot/postview image from a stills +- * capture +- */ +-#define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT BIT(8) +-/* Signals a buffer which contains data known to be corrupted */ +-#define MMAL_BUFFER_HEADER_FLAG_CORRUPTED BIT(9) +-/* Signals that a buffer failed to be transmitted */ +-#define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED BIT(10) +- +-struct mmal_driver_buffer { +- u32 magic; +- u32 component_handle; +- u32 port_handle; +- u32 client_context; +-}; +- +-/* buffer header */ +-struct mmal_buffer_header { +- u32 next; /* next header */ +- u32 priv; /* framework private data */ +- u32 cmd; +- u32 data; +- u32 alloc_size; +- u32 length; +- u32 offset; +- u32 flags; +- s64 pts; +- s64 dts; +- u32 type; +- u32 user_data; +-}; +- +-struct mmal_buffer_header_type_specific { +- union { +- struct { +- u32 planes; +- u32 offset[4]; +- u32 pitch[4]; +- u32 flags; +- } video; +- } u; +-}; +- +-struct mmal_msg_buffer_from_host { +- /* +- *The front 32 bytes of the buffer header are copied +- * back to us in the reply to allow for context. This +- * area is used to store two mmal_driver_buffer structures to +- * allow for multiple concurrent service users. +- */ +- /* control data */ +- struct mmal_driver_buffer drvbuf; +- +- /* referenced control data for passthrough buffer management */ +- struct mmal_driver_buffer drvbuf_ref; +- struct mmal_buffer_header buffer_header; /* buffer header itself */ +- struct mmal_buffer_header_type_specific buffer_header_type_specific; +- s32 is_zero_copy; +- s32 has_reference; +- +- /* allows short data to be xfered in control message */ +- u32 payload_in_message; +- u8 short_data[MMAL_VC_SHORT_DATA]; +-}; +- +-/* port parameter setting */ +- +-#define MMAL_WORKER_PORT_PARAMETER_SPACE 96 +- +-struct mmal_msg_port_parameter_set { +- u32 component_handle; /* component */ +- u32 port_handle; /* port */ +- u32 id; /* Parameter ID */ +- u32 size; /* Parameter size */ +- uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; +-}; +- +-struct mmal_msg_port_parameter_set_reply { +- u32 status; /* enum mmal_msg_status todo: how does this +- * differ to the one in the header? +- */ +-}; +- +-/* port parameter getting */ +- +-struct mmal_msg_port_parameter_get { +- u32 component_handle; /* component */ +- u32 port_handle; /* port */ +- u32 id; /* Parameter ID */ +- u32 size; /* Parameter size */ +-}; +- +-struct mmal_msg_port_parameter_get_reply { +- u32 status; /* Status of mmal_port_parameter_get call */ +- u32 id; /* Parameter ID */ +- u32 size; /* Parameter size */ +- uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; +-}; +- +-/* event messages */ +-#define MMAL_WORKER_EVENT_SPACE 256 +- +-struct mmal_msg_event_to_host { +- u32 client_component; /* component context */ +- +- u32 port_type; +- u32 port_num; +- +- u32 cmd; +- u32 length; +- u8 data[MMAL_WORKER_EVENT_SPACE]; +- u32 delayed_buffer; +-}; +- +-/* all mmal messages are serialised through this structure */ +-struct mmal_msg { +- /* header */ +- struct mmal_msg_header h; +- /* payload */ +- union { +- struct mmal_msg_version version; +- +- struct mmal_msg_component_create component_create; +- struct mmal_msg_component_create_reply component_create_reply; +- +- struct mmal_msg_component_destroy component_destroy; +- struct mmal_msg_component_destroy_reply component_destroy_reply; +- +- struct mmal_msg_component_enable component_enable; +- struct mmal_msg_component_enable_reply component_enable_reply; +- +- struct mmal_msg_component_disable component_disable; +- struct mmal_msg_component_disable_reply component_disable_reply; +- +- struct mmal_msg_port_info_get port_info_get; +- struct mmal_msg_port_info_get_reply port_info_get_reply; +- +- struct mmal_msg_port_info_set port_info_set; +- struct mmal_msg_port_info_set_reply port_info_set_reply; +- +- struct mmal_msg_port_action_port port_action_port; +- struct mmal_msg_port_action_handle port_action_handle; +- struct mmal_msg_port_action_reply port_action_reply; +- +- struct mmal_msg_buffer_from_host buffer_from_host; +- +- struct mmal_msg_port_parameter_set port_parameter_set; +- struct mmal_msg_port_parameter_set_reply +- port_parameter_set_reply; +- struct mmal_msg_port_parameter_get +- port_parameter_get; +- struct mmal_msg_port_parameter_get_reply +- port_parameter_get_reply; +- +- struct mmal_msg_event_to_host event_to_host; +- +- u8 payload[MMAL_MSG_MAX_PAYLOAD]; +- } u; +-}; +-#endif +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h ++++ /dev/null +@@ -1,755 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0 */ +-/* +- * Broadcom BM2835 V4L2 driver +- * +- * Copyright © 2013 Raspberry Pi (Trading) Ltd. +- * +- * Authors: Vincent Sanders @ Collabora +- * Dave Stevenson @ Broadcom +- * (now dave.stevenson@raspberrypi.org) +- * Simon Mellor @ Broadcom +- * Luke Diamand @ Broadcom +- */ +- +-/* common parameters */ +- +-/** @name Parameter groups +- * Parameters are divided into groups, and then allocated sequentially within +- * a group using an enum. +- * @{ +- */ +- +-#ifndef MMAL_PARAMETERS_H +-#define MMAL_PARAMETERS_H +- +-/** Common parameter ID group, used with many types of component. */ +-#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) +-/** Camera-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) +-/** Video-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) +-/** Audio-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) +-/** Clock-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) +-/** Miracast-specific parameter ID group. */ +-#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) +- +-/* Common parameters */ +-enum mmal_parameter_common_type { +- /**< Never a valid parameter ID */ +- MMAL_PARAMETER_UNUSED = MMAL_PARAMETER_GROUP_COMMON, +- +- /**< MMAL_PARAMETER_ENCODING_T */ +- MMAL_PARAMETER_SUPPORTED_ENCODINGS, +- /**< MMAL_PARAMETER_URI_T */ +- MMAL_PARAMETER_URI, +- /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ +- MMAL_PARAMETER_CHANGE_EVENT_REQUEST, +- /** MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_ZERO_COPY, +- /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ +- MMAL_PARAMETER_BUFFER_REQUIREMENTS, +- /**< MMAL_PARAMETER_STATISTICS_T */ +- MMAL_PARAMETER_STATISTICS, +- /**< MMAL_PARAMETER_CORE_STATISTICS_T */ +- MMAL_PARAMETER_CORE_STATISTICS, +- /**< MMAL_PARAMETER_MEM_USAGE_T */ +- MMAL_PARAMETER_MEM_USAGE, +- /**< MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_BUFFER_FLAG_FILTER, +- /**< MMAL_PARAMETER_SEEK_T */ +- MMAL_PARAMETER_SEEK, +- /**< MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_POWERMON_ENABLE, +- /**< MMAL_PARAMETER_LOGGING_T */ +- MMAL_PARAMETER_LOGGING, +- /**< MMAL_PARAMETER_UINT64_T */ +- MMAL_PARAMETER_SYSTEM_TIME, +- /**< MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_NO_IMAGE_PADDING, +-}; +- +-/* camera parameters */ +- +-enum mmal_parameter_camera_type { +- /* 0 */ +- /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ +- MMAL_PARAMETER_THUMBNAIL_CONFIGURATION = +- MMAL_PARAMETER_GROUP_CAMERA, +- /**< Unused? */ +- MMAL_PARAMETER_CAPTURE_QUALITY, +- /**< @ref MMAL_PARAMETER_INT32_T */ +- MMAL_PARAMETER_ROTATION, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_EXIF_DISABLE, +- /**< @ref MMAL_PARAMETER_EXIF_T */ +- MMAL_PARAMETER_EXIF, +- /**< @ref MMAL_PARAM_AWBMODE_T */ +- MMAL_PARAMETER_AWB_MODE, +- /**< @ref MMAL_PARAMETER_IMAGEFX_T */ +- MMAL_PARAMETER_IMAGE_EFFECT, +- /**< @ref MMAL_PARAMETER_COLOURFX_T */ +- MMAL_PARAMETER_COLOUR_EFFECT, +- /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ +- MMAL_PARAMETER_FLICKER_AVOID, +- /**< @ref MMAL_PARAMETER_FLASH_T */ +- MMAL_PARAMETER_FLASH, +- /**< @ref MMAL_PARAMETER_REDEYE_T */ +- MMAL_PARAMETER_REDEYE, +- /**< @ref MMAL_PARAMETER_FOCUS_T */ +- MMAL_PARAMETER_FOCUS, +- /**< Unused? */ +- MMAL_PARAMETER_FOCAL_LENGTHS, +- /**< @ref MMAL_PARAMETER_INT32_T */ +- MMAL_PARAMETER_EXPOSURE_COMP, +- /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ +- MMAL_PARAMETER_ZOOM, +- /**< @ref MMAL_PARAMETER_MIRROR_T */ +- MMAL_PARAMETER_MIRROR, +- +- /* 0x10 */ +- /**< @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_CAMERA_NUM, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_CAPTURE, +- /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ +- MMAL_PARAMETER_EXPOSURE_MODE, +- /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ +- MMAL_PARAMETER_EXP_METERING_MODE, +- /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ +- MMAL_PARAMETER_FOCUS_STATUS, +- /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ +- MMAL_PARAMETER_CAMERA_CONFIG, +- /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ +- MMAL_PARAMETER_CAPTURE_STATUS, +- /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ +- MMAL_PARAMETER_FACE_TRACK, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, +- /**< @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_JPEG_Q_FACTOR, +- /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ +- MMAL_PARAMETER_FRAME_RATE, +- /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ +- MMAL_PARAMETER_USE_STC, +- /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ +- MMAL_PARAMETER_CAMERA_INFO, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_VIDEO_STABILISATION, +- /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ +- MMAL_PARAMETER_FACE_TRACK_RESULTS, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_ENABLE_RAW_CAPTURE, +- +- /* 0x20 */ +- /**< @ref MMAL_PARAMETER_URI_T */ +- MMAL_PARAMETER_DPF_FILE, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_ENABLE_DPF_FILE, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_DPF_FAIL_IS_FATAL, +- /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ +- MMAL_PARAMETER_CAPTURE_MODE, +- /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ +- MMAL_PARAMETER_FOCUS_REGIONS, +- /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ +- MMAL_PARAMETER_INPUT_CROP, +- /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ +- MMAL_PARAMETER_SENSOR_INFORMATION, +- /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ +- MMAL_PARAMETER_FLASH_SELECT, +- /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ +- MMAL_PARAMETER_FIELD_OF_VIEW, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, +- /**< @ref MMAL_PARAMETER_DRC_T */ +- MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, +- /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ +- MMAL_PARAMETER_ALGORITHM_CONTROL, +- /**< @ref MMAL_PARAMETER_RATIONAL_T */ +- MMAL_PARAMETER_SHARPNESS, +- /**< @ref MMAL_PARAMETER_RATIONAL_T */ +- MMAL_PARAMETER_CONTRAST, +- /**< @ref MMAL_PARAMETER_RATIONAL_T */ +- MMAL_PARAMETER_BRIGHTNESS, +- /**< @ref MMAL_PARAMETER_RATIONAL_T */ +- MMAL_PARAMETER_SATURATION, +- +- /* 0x30 */ +- /**< @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_ISO, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_ANTISHAKE, +- /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ +- MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_CAMERA_BURST_CAPTURE, +- /** @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_CAMERA_MIN_ISO, +- /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ +- MMAL_PARAMETER_CAMERA_USE_CASE, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_CAPTURE_STATS_PASS, +- /** @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_ENABLE_REGISTER_FILE, +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL, +- /** @ref MMAL_PARAMETER_CONFIGFILE_T */ +- MMAL_PARAMETER_CONFIGFILE_REGISTERS, +- /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ +- MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_JPEG_ATTACH_LOG, +- /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ +- MMAL_PARAMETER_ZERO_SHUTTER_LAG, +- /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ +- MMAL_PARAMETER_FPS_RANGE, +- /**< @ref MMAL_PARAMETER_INT32_T */ +- MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, +- +- /* 0x40 */ +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_SW_SHARPEN_DISABLE, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_FLASH_REQUIRED, +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_SW_SATURATION_DISABLE, +- /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_SHUTTER_SPEED, +- /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ +- MMAL_PARAMETER_CUSTOM_AWB_GAINS, +-}; +- +-struct mmal_parameter_rational { +- s32 num; /**< Numerator */ +- s32 den; /**< Denominator */ +-}; +- +-enum mmal_parameter_camera_config_timestamp_mode { +- MMAL_PARAM_TIMESTAMP_MODE_ZERO = 0, /* Always timestamp frames as 0 */ +- MMAL_PARAM_TIMESTAMP_MODE_RAW_STC, /* Use the raw STC value +- * for the frame timestamp +- */ +- MMAL_PARAM_TIMESTAMP_MODE_RESET_STC, /* Use the STC timestamp +- * but subtract the +- * timestamp of the first +- * frame sent to give a +- * zero based timestamp. +- */ +-}; +- +-struct mmal_parameter_fps_range { +- /**< Low end of the permitted framerate range */ +- struct mmal_parameter_rational fps_low; +- /**< High end of the permitted framerate range */ +- struct mmal_parameter_rational fps_high; +-}; +- +-/* camera configuration parameter */ +-struct mmal_parameter_camera_config { +- /* Parameters for setting up the image pools */ +- u32 max_stills_w; /* Max size of stills capture */ +- u32 max_stills_h; +- u32 stills_yuv422; /* Allow YUV422 stills capture */ +- u32 one_shot_stills; /* Continuous or one shot stills captures. */ +- +- u32 max_preview_video_w; /* Max size of the preview or video +- * capture frames +- */ +- u32 max_preview_video_h; +- u32 num_preview_video_frames; +- +- /** Sets the height of the circular buffer for stills capture. */ +- u32 stills_capture_circular_buffer_height; +- +- /** Allows preview/encode to resume as fast as possible after the stills +- * input frame has been received, and then processes the still frame in +- * the background whilst preview/encode has resumed. +- * Actual mode is controlled by MMAL_PARAMETER_CAPTURE_MODE. +- */ +- u32 fast_preview_resume; +- +- /** Selects algorithm for timestamping frames if +- * there is no clock component connected. +- * enum mmal_parameter_camera_config_timestamp_mode +- */ +- s32 use_stc_timestamp; +-}; +- +-enum mmal_parameter_exposuremode { +- MMAL_PARAM_EXPOSUREMODE_OFF, +- MMAL_PARAM_EXPOSUREMODE_AUTO, +- MMAL_PARAM_EXPOSUREMODE_NIGHT, +- MMAL_PARAM_EXPOSUREMODE_NIGHTPREVIEW, +- MMAL_PARAM_EXPOSUREMODE_BACKLIGHT, +- MMAL_PARAM_EXPOSUREMODE_SPOTLIGHT, +- MMAL_PARAM_EXPOSUREMODE_SPORTS, +- MMAL_PARAM_EXPOSUREMODE_SNOW, +- MMAL_PARAM_EXPOSUREMODE_BEACH, +- MMAL_PARAM_EXPOSUREMODE_VERYLONG, +- MMAL_PARAM_EXPOSUREMODE_FIXEDFPS, +- MMAL_PARAM_EXPOSUREMODE_ANTISHAKE, +- MMAL_PARAM_EXPOSUREMODE_FIREWORKS, +-}; +- +-enum mmal_parameter_exposuremeteringmode { +- MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE, +- MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT, +- MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT, +- MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX, +-}; +- +-enum mmal_parameter_awbmode { +- MMAL_PARAM_AWBMODE_OFF, +- MMAL_PARAM_AWBMODE_AUTO, +- MMAL_PARAM_AWBMODE_SUNLIGHT, +- MMAL_PARAM_AWBMODE_CLOUDY, +- MMAL_PARAM_AWBMODE_SHADE, +- MMAL_PARAM_AWBMODE_TUNGSTEN, +- MMAL_PARAM_AWBMODE_FLUORESCENT, +- MMAL_PARAM_AWBMODE_INCANDESCENT, +- MMAL_PARAM_AWBMODE_FLASH, +- MMAL_PARAM_AWBMODE_HORIZON, +-}; +- +-enum mmal_parameter_imagefx { +- MMAL_PARAM_IMAGEFX_NONE, +- MMAL_PARAM_IMAGEFX_NEGATIVE, +- MMAL_PARAM_IMAGEFX_SOLARIZE, +- MMAL_PARAM_IMAGEFX_POSTERIZE, +- MMAL_PARAM_IMAGEFX_WHITEBOARD, +- MMAL_PARAM_IMAGEFX_BLACKBOARD, +- MMAL_PARAM_IMAGEFX_SKETCH, +- MMAL_PARAM_IMAGEFX_DENOISE, +- MMAL_PARAM_IMAGEFX_EMBOSS, +- MMAL_PARAM_IMAGEFX_OILPAINT, +- MMAL_PARAM_IMAGEFX_HATCH, +- MMAL_PARAM_IMAGEFX_GPEN, +- MMAL_PARAM_IMAGEFX_PASTEL, +- MMAL_PARAM_IMAGEFX_WATERCOLOUR, +- MMAL_PARAM_IMAGEFX_FILM, +- MMAL_PARAM_IMAGEFX_BLUR, +- MMAL_PARAM_IMAGEFX_SATURATION, +- MMAL_PARAM_IMAGEFX_COLOURSWAP, +- MMAL_PARAM_IMAGEFX_WASHEDOUT, +- MMAL_PARAM_IMAGEFX_POSTERISE, +- MMAL_PARAM_IMAGEFX_COLOURPOINT, +- MMAL_PARAM_IMAGEFX_COLOURBALANCE, +- MMAL_PARAM_IMAGEFX_CARTOON, +-}; +- +-enum MMAL_PARAM_FLICKERAVOID_T { +- MMAL_PARAM_FLICKERAVOID_OFF, +- MMAL_PARAM_FLICKERAVOID_AUTO, +- MMAL_PARAM_FLICKERAVOID_50HZ, +- MMAL_PARAM_FLICKERAVOID_60HZ, +- MMAL_PARAM_FLICKERAVOID_MAX = 0x7FFFFFFF +-}; +- +-struct mmal_parameter_awbgains { +- struct mmal_parameter_rational r_gain; /**< Red gain */ +- struct mmal_parameter_rational b_gain; /**< Blue gain */ +-}; +- +-/** Manner of video rate control */ +-enum mmal_parameter_rate_control_mode { +- MMAL_VIDEO_RATECONTROL_DEFAULT, +- MMAL_VIDEO_RATECONTROL_VARIABLE, +- MMAL_VIDEO_RATECONTROL_CONSTANT, +- MMAL_VIDEO_RATECONTROL_VARIABLE_SKIP_FRAMES, +- MMAL_VIDEO_RATECONTROL_CONSTANT_SKIP_FRAMES +-}; +- +-enum mmal_video_profile { +- MMAL_VIDEO_PROFILE_H263_BASELINE, +- MMAL_VIDEO_PROFILE_H263_H320CODING, +- MMAL_VIDEO_PROFILE_H263_BACKWARDCOMPATIBLE, +- MMAL_VIDEO_PROFILE_H263_ISWV2, +- MMAL_VIDEO_PROFILE_H263_ISWV3, +- MMAL_VIDEO_PROFILE_H263_HIGHCOMPRESSION, +- MMAL_VIDEO_PROFILE_H263_INTERNET, +- MMAL_VIDEO_PROFILE_H263_INTERLACE, +- MMAL_VIDEO_PROFILE_H263_HIGHLATENCY, +- MMAL_VIDEO_PROFILE_MP4V_SIMPLE, +- MMAL_VIDEO_PROFILE_MP4V_SIMPLESCALABLE, +- MMAL_VIDEO_PROFILE_MP4V_CORE, +- MMAL_VIDEO_PROFILE_MP4V_MAIN, +- MMAL_VIDEO_PROFILE_MP4V_NBIT, +- MMAL_VIDEO_PROFILE_MP4V_SCALABLETEXTURE, +- MMAL_VIDEO_PROFILE_MP4V_SIMPLEFACE, +- MMAL_VIDEO_PROFILE_MP4V_SIMPLEFBA, +- MMAL_VIDEO_PROFILE_MP4V_BASICANIMATED, +- MMAL_VIDEO_PROFILE_MP4V_HYBRID, +- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDREALTIME, +- MMAL_VIDEO_PROFILE_MP4V_CORESCALABLE, +- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCODING, +- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCORE, +- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSCALABLE, +- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSIMPLE, +- MMAL_VIDEO_PROFILE_H264_BASELINE, +- MMAL_VIDEO_PROFILE_H264_MAIN, +- MMAL_VIDEO_PROFILE_H264_EXTENDED, +- MMAL_VIDEO_PROFILE_H264_HIGH, +- MMAL_VIDEO_PROFILE_H264_HIGH10, +- MMAL_VIDEO_PROFILE_H264_HIGH422, +- MMAL_VIDEO_PROFILE_H264_HIGH444, +- MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE, +- MMAL_VIDEO_PROFILE_DUMMY = 0x7FFFFFFF +-}; +- +-enum mmal_video_level { +- MMAL_VIDEO_LEVEL_H263_10, +- MMAL_VIDEO_LEVEL_H263_20, +- MMAL_VIDEO_LEVEL_H263_30, +- MMAL_VIDEO_LEVEL_H263_40, +- MMAL_VIDEO_LEVEL_H263_45, +- MMAL_VIDEO_LEVEL_H263_50, +- MMAL_VIDEO_LEVEL_H263_60, +- MMAL_VIDEO_LEVEL_H263_70, +- MMAL_VIDEO_LEVEL_MP4V_0, +- MMAL_VIDEO_LEVEL_MP4V_0b, +- MMAL_VIDEO_LEVEL_MP4V_1, +- MMAL_VIDEO_LEVEL_MP4V_2, +- MMAL_VIDEO_LEVEL_MP4V_3, +- MMAL_VIDEO_LEVEL_MP4V_4, +- MMAL_VIDEO_LEVEL_MP4V_4a, +- MMAL_VIDEO_LEVEL_MP4V_5, +- MMAL_VIDEO_LEVEL_MP4V_6, +- MMAL_VIDEO_LEVEL_H264_1, +- MMAL_VIDEO_LEVEL_H264_1b, +- MMAL_VIDEO_LEVEL_H264_11, +- MMAL_VIDEO_LEVEL_H264_12, +- MMAL_VIDEO_LEVEL_H264_13, +- MMAL_VIDEO_LEVEL_H264_2, +- MMAL_VIDEO_LEVEL_H264_21, +- MMAL_VIDEO_LEVEL_H264_22, +- MMAL_VIDEO_LEVEL_H264_3, +- MMAL_VIDEO_LEVEL_H264_31, +- MMAL_VIDEO_LEVEL_H264_32, +- MMAL_VIDEO_LEVEL_H264_4, +- MMAL_VIDEO_LEVEL_H264_41, +- MMAL_VIDEO_LEVEL_H264_42, +- MMAL_VIDEO_LEVEL_H264_5, +- MMAL_VIDEO_LEVEL_H264_51, +- MMAL_VIDEO_LEVEL_DUMMY = 0x7FFFFFFF +-}; +- +-struct mmal_parameter_video_profile { +- enum mmal_video_profile profile; +- enum mmal_video_level level; +-}; +- +-/* video parameters */ +- +-enum mmal_parameter_video_type { +- /** @ref MMAL_DISPLAYREGION_T */ +- MMAL_PARAMETER_DISPLAYREGION = MMAL_PARAMETER_GROUP_VIDEO, +- +- /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ +- MMAL_PARAMETER_SUPPORTED_PROFILES, +- +- /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ +- MMAL_PARAMETER_PROFILE, +- +- /** @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_INTRAPERIOD, +- +- /** @ref MMAL_PARAMETER_VIDEO_RATECONTROL_T */ +- MMAL_PARAMETER_RATECONTROL, +- +- /** @ref MMAL_PARAMETER_VIDEO_NALUNITFORMAT_T */ +- MMAL_PARAMETER_NALUNITFORMAT, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_MINIMISE_FRAGMENTATION, +- +- /** @ref MMAL_PARAMETER_UINT32_T. +- * Setting the value to zero resets to the default (one slice per +- * frame). +- */ +- MMAL_PARAMETER_MB_ROWS_PER_SLICE, +- +- /** @ref MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION_T */ +- MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION, +- +- /** @ref MMAL_PARAMETER_VIDEO_EEDE_ENABLE_T */ +- MMAL_PARAMETER_VIDEO_EEDE_ENABLE, +- +- /** @ref MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE_T */ +- MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T. Request an I-frame. */ +- MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME, +- /** @ref MMAL_PARAMETER_VIDEO_INTRA_REFRESH_T */ +- MMAL_PARAMETER_VIDEO_INTRA_REFRESH, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ +- MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, +- +- /** @ref MMAL_PARAMETER_UINT32_T. Run-time bit rate control */ +- MMAL_PARAMETER_VIDEO_BIT_RATE, +- +- /** @ref MMAL_PARAMETER_FRAME_RATE_T */ +- MMAL_PARAMETER_VIDEO_FRAME_RATE, +- +- /** @ref MMAL_PARAMETER_UINT32_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_MIN_QUANT, +- +- /** @ref MMAL_PARAMETER_UINT32_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_MAX_QUANT, +- +- /** @ref MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL, +- +- MMAL_PARAMETER_EXTRA_BUFFERS, /**< @ref MMAL_PARAMETER_UINT32_T. */ +- /** @ref MMAL_PARAMETER_UINT32_T. +- * Changing this parameter from the default can reduce frame rate +- * because image buffers need to be re-pitched. +- */ +- MMAL_PARAMETER_VIDEO_ALIGN_HORIZ, +- +- /** @ref MMAL_PARAMETER_UINT32_T. +- * Changing this parameter from the default can reduce frame rate +- * because image buffers need to be re-pitched. +- */ +- MMAL_PARAMETER_VIDEO_ALIGN_VERT, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ +- MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAMES, +- +- /** @ref MMAL_PARAMETER_UINT32_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_INITIAL_QUANT, +- +- /**< @ref MMAL_PARAMETER_UINT32_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_QP_P, +- +- /**< @ref MMAL_PARAMETER_UINT32_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_RC_SLICE_DQUANT, +- +- /** @ref MMAL_PARAMETER_UINT32_T */ +- MMAL_PARAMETER_VIDEO_ENCODE_FRAME_LIMIT_BITS, +- +- /** @ref MMAL_PARAMETER_UINT32_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_PEAK_RATE, +- +- /* H264 specific parameters */ +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_H264_DISABLE_CABAC, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_LATENCY, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_H264_AU_DELIMITERS, +- +- /** @ref MMAL_PARAMETER_UINT32_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_H264_DEBLOCK_IDC, +- +- /** @ref MMAL_PARAMETER_VIDEO_ENCODER_H264_MB_INTRA_MODES_T. */ +- MMAL_PARAMETER_VIDEO_ENCODE_H264_MB_INTRA_MODE, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_VIDEO_ENCODE_HEADER_ON_OPEN, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_VIDEO_ENCODE_PRECODE_FOR_QP, +- +- /** @ref MMAL_PARAMETER_VIDEO_DRM_INIT_INFO_T. */ +- MMAL_PARAMETER_VIDEO_DRM_INIT_INFO, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_VIDEO_TIMESTAMP_FIFO, +- +- /** @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_VIDEO_DECODE_ERROR_CONCEALMENT, +- +- /** @ref MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER_T. */ +- MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER, +- +- /** @ref MMAL_PARAMETER_BYTES_T */ +- MMAL_PARAMETER_VIDEO_DECODE_CONFIG_VD3, +- +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_VIDEO_ENCODE_H264_VCL_HRD_PARAMETERS, +- +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG, +- +- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER +-}; +- +-/** Valid mirror modes */ +-enum mmal_parameter_mirror { +- MMAL_PARAM_MIRROR_NONE, +- MMAL_PARAM_MIRROR_VERTICAL, +- MMAL_PARAM_MIRROR_HORIZONTAL, +- MMAL_PARAM_MIRROR_BOTH, +-}; +- +-enum mmal_parameter_displaytransform { +- MMAL_DISPLAY_ROT0 = 0, +- MMAL_DISPLAY_MIRROR_ROT0 = 1, +- MMAL_DISPLAY_MIRROR_ROT180 = 2, +- MMAL_DISPLAY_ROT180 = 3, +- MMAL_DISPLAY_MIRROR_ROT90 = 4, +- MMAL_DISPLAY_ROT270 = 5, +- MMAL_DISPLAY_ROT90 = 6, +- MMAL_DISPLAY_MIRROR_ROT270 = 7, +-}; +- +-enum mmal_parameter_displaymode { +- MMAL_DISPLAY_MODE_FILL = 0, +- MMAL_DISPLAY_MODE_LETTERBOX = 1, +-}; +- +-enum mmal_parameter_displayset { +- MMAL_DISPLAY_SET_NONE = 0, +- MMAL_DISPLAY_SET_NUM = 1, +- MMAL_DISPLAY_SET_FULLSCREEN = 2, +- MMAL_DISPLAY_SET_TRANSFORM = 4, +- MMAL_DISPLAY_SET_DEST_RECT = 8, +- MMAL_DISPLAY_SET_SRC_RECT = 0x10, +- MMAL_DISPLAY_SET_MODE = 0x20, +- MMAL_DISPLAY_SET_PIXEL = 0x40, +- MMAL_DISPLAY_SET_NOASPECT = 0x80, +- MMAL_DISPLAY_SET_LAYER = 0x100, +- MMAL_DISPLAY_SET_COPYPROTECT = 0x200, +- MMAL_DISPLAY_SET_ALPHA = 0x400, +-}; +- +-/* rectangle, used lots so it gets its own struct */ +-struct vchiq_mmal_rect { +- s32 x; +- s32 y; +- s32 width; +- s32 height; +-}; +- +-struct mmal_parameter_displayregion { +- /** Bitfield that indicates which fields are set and should be +- * used. All other fields will maintain their current value. +- * \ref MMAL_DISPLAYSET_T defines the bits that can be +- * combined. +- */ +- u32 set; +- +- /** Describes the display output device, with 0 typically +- * being a directly connected LCD display. The actual values +- * will depend on the hardware. Code using hard-wired numbers +- * (e.g. 2) is certain to fail. +- */ +- +- u32 display_num; +- /** Indicates that we are using the full device screen area, +- * rather than a window of the display. If zero, then +- * dest_rect is used to specify a region of the display to +- * use. +- */ +- +- s32 fullscreen; +- /** Indicates any rotation or flipping used to map frames onto +- * the natural display orientation. +- */ +- u32 transform; /* enum mmal_parameter_displaytransform */ +- +- /** Where to display the frame within the screen, if +- * fullscreen is zero. +- */ +- struct vchiq_mmal_rect dest_rect; +- +- /** Indicates which area of the frame to display. If all +- * values are zero, the whole frame will be used. +- */ +- struct vchiq_mmal_rect src_rect; +- +- /** If set to non-zero, indicates that any display scaling +- * should disregard the aspect ratio of the frame region being +- * displayed. +- */ +- s32 noaspect; +- +- /** Indicates how the image should be scaled to fit the +- * display. \code MMAL_DISPLAY_MODE_FILL \endcode indicates +- * that the image should fill the screen by potentially +- * cropping the frames. Setting \code mode \endcode to \code +- * MMAL_DISPLAY_MODE_LETTERBOX \endcode indicates that all the +- * source region should be displayed and black bars added if +- * necessary. +- */ +- u32 mode; /* enum mmal_parameter_displaymode */ +- +- /** If non-zero, defines the width of a source pixel relative +- * to \code pixel_y \endcode. If zero, then pixels default to +- * being square. +- */ +- u32 pixel_x; +- +- /** If non-zero, defines the height of a source pixel relative +- * to \code pixel_x \endcode. If zero, then pixels default to +- * being square. +- */ +- u32 pixel_y; +- +- /** Sets the relative depth of the images, with greater values +- * being in front of smaller values. +- */ +- u32 layer; +- +- /** Set to non-zero to ensure copy protection is used on +- * output. +- */ +- s32 copyprotect_required; +- +- /** Level of opacity of the layer, where zero is fully +- * transparent and 255 is fully opaque. +- */ +- u32 alpha; +-}; +- +-#define MMAL_MAX_IMAGEFX_PARAMETERS 5 +- +-struct mmal_parameter_imagefx_parameters { +- enum mmal_parameter_imagefx effect; +- u32 num_effect_params; +- u32 effect_parameter[MMAL_MAX_IMAGEFX_PARAMETERS]; +-}; +- +-#define MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS 4 +-#define MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES 2 +-#define MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN 16 +- +-struct mmal_parameter_camera_info_camera_t { +- u32 port_id; +- u32 max_width; +- u32 max_height; +- u32 lens_present; +- u8 camera_name[MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN]; +-}; +- +-enum mmal_parameter_camera_info_flash_type_t { +- /* Make values explicit to ensure they match values in config ini */ +- MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_XENON = 0, +- MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_LED = 1, +- MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_OTHER = 2, +- MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_MAX = 0x7FFFFFFF +-}; +- +-struct mmal_parameter_camera_info_flash_t { +- enum mmal_parameter_camera_info_flash_type_t flash_type; +-}; +- +-struct mmal_parameter_camera_info_t { +- u32 num_cameras; +- u32 num_flashes; +- struct mmal_parameter_camera_info_camera_t +- cameras[MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS]; +- struct mmal_parameter_camera_info_flash_t +- flashes[MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES]; +-}; +- +-#endif +--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h ++++ /dev/null +@@ -1,166 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0 */ +-/* +- * Broadcom BM2835 V4L2 driver +- * +- * Copyright © 2013 Raspberry Pi (Trading) Ltd. +- * +- * Authors: Vincent Sanders @ Collabora +- * Dave Stevenson @ Broadcom +- * (now dave.stevenson@raspberrypi.org) +- * Simon Mellor @ Broadcom +- * Luke Diamand @ Broadcom +- * +- * MMAL interface to VCHIQ message passing +- */ +- +-#ifndef MMAL_VCHIQ_H +-#define MMAL_VCHIQ_H +- +-#include "mmal-msg-format.h" +- +-#define MAX_PORT_COUNT 4 +- +-/* Maximum size of the format extradata. */ +-#define MMAL_FORMAT_EXTRADATA_MAX_SIZE 128 +- +-struct vchiq_mmal_instance; +- +-enum vchiq_mmal_es_type { +- MMAL_ES_TYPE_UNKNOWN, /**< Unknown elementary stream type */ +- MMAL_ES_TYPE_CONTROL, /**< Elementary stream of control commands */ +- MMAL_ES_TYPE_AUDIO, /**< Audio elementary stream */ +- MMAL_ES_TYPE_VIDEO, /**< Video elementary stream */ +- MMAL_ES_TYPE_SUBPICTURE /**< Sub-picture elementary stream */ +-}; +- +-struct vchiq_mmal_port_buffer { +- unsigned int num; /* number of buffers */ +- u32 size; /* size of buffers */ +- u32 alignment; /* alignment of buffers */ +-}; +- +-struct vchiq_mmal_port; +- +-typedef void (*vchiq_mmal_buffer_cb)( +- struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- int status, struct mmal_buffer *buffer, +- unsigned long length, u32 mmal_flags, s64 dts, s64 pts); +- +-struct vchiq_mmal_port { +- bool enabled; +- u32 handle; +- u32 type; /* port type, cached to use on port info set */ +- u32 index; /* port index, cached to use on port info set */ +- +- /* component port belongs to, allows simple deref */ +- struct vchiq_mmal_component *component; +- +- struct vchiq_mmal_port *connected; /* port conencted to */ +- +- /* buffer info */ +- struct vchiq_mmal_port_buffer minimum_buffer; +- struct vchiq_mmal_port_buffer recommended_buffer; +- struct vchiq_mmal_port_buffer current_buffer; +- +- /* stream format */ +- struct mmal_es_format_local format; +- /* elementary stream format */ +- union mmal_es_specific_format es; +- +- /* data buffers to fill */ +- struct list_head buffers; +- /* lock to serialise adding and removing buffers from list */ +- spinlock_t slock; +- +- /* Count of buffers the VPU has yet to return */ +- atomic_t buffers_with_vpu; +- /* callback on buffer completion */ +- vchiq_mmal_buffer_cb buffer_cb; +- /* callback context */ +- void *cb_ctx; +-}; +- +-struct vchiq_mmal_component { +- bool enabled; +- u32 handle; /* VideoCore handle for component */ +- u32 inputs; /* Number of input ports */ +- u32 outputs; /* Number of output ports */ +- u32 clocks; /* Number of clock ports */ +- struct vchiq_mmal_port control; /* control port */ +- struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */ +- struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */ +- struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */ +-}; +- +-int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance); +-int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance); +- +-/* Initialise a mmal component and its ports +- * +- */ +-int vchiq_mmal_component_init( +- struct vchiq_mmal_instance *instance, +- const char *name, +- struct vchiq_mmal_component **component_out); +- +-int vchiq_mmal_component_finalise( +- struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component); +- +-int vchiq_mmal_component_enable( +- struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component); +- +-int vchiq_mmal_component_disable( +- struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_component *component); +- +-/* enable a mmal port +- * +- * enables a port and if a buffer callback provided enque buffer +- * headers as appropriate for the port. +- */ +-int vchiq_mmal_port_enable( +- struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- vchiq_mmal_buffer_cb buffer_cb); +- +-/* disable a port +- * +- * disable a port will dequeue any pending buffers +- */ +-int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port); +- +-int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- u32 parameter, +- void *value, +- u32 value_size); +- +-int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- u32 parameter, +- void *value, +- u32 *value_size); +- +-int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port); +- +-int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *src, +- struct vchiq_mmal_port *dst); +- +-int vchiq_mmal_version(struct vchiq_mmal_instance *instance, +- u32 *major_out, +- u32 *minor_out); +- +-int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, +- struct vchiq_mmal_port *port, +- struct mmal_buffer *buf); +- +-int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, +- struct mmal_buffer *buf); +-int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf); +-#endif /* MMAL_VCHIQ_H */ +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h +@@ -0,0 +1,61 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom ++ * ++ * MMAL structures ++ * ++ */ ++#ifndef MMAL_COMMON_H ++#define MMAL_COMMON_H ++ ++#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) ++#define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l') ++ ++/** Special value signalling that time is not known */ ++#define MMAL_TIME_UNKNOWN BIT_ULL(63) ++ ++struct mmal_msg_context; ++ ++/* mapping between v4l and mmal video modes */ ++struct mmal_fmt { ++ char *name; ++ u32 fourcc; /* v4l2 format id */ ++ int flags; /* v4l2 flags field */ ++ u32 mmal; ++ int depth; ++ u32 mmal_component; /* MMAL component index to be used to encode */ ++ u32 ybbp; /* depth of first Y plane for planar formats */ ++ bool remove_padding; /* Does the GPU have to remove padding, ++ * or can we do hide padding via bytesperline. ++ */ ++}; ++ ++/* buffer for one video frame */ ++struct mmal_buffer { ++ /* v4l buffer data -- must be first */ ++ struct vb2_v4l2_buffer vb; ++ ++ /* list of buffers available */ ++ struct list_head list; ++ ++ void *buffer; /* buffer pointer */ ++ unsigned long buffer_size; /* size of allocated buffer */ ++ ++ struct mmal_msg_context *msg_context; ++}; ++ ++/* */ ++struct mmal_colourfx { ++ s32 enable; ++ u32 u; ++ u32 v; ++}; ++#endif +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-encodings.h +@@ -0,0 +1,124 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom ++ */ ++#ifndef MMAL_ENCODINGS_H ++#define MMAL_ENCODINGS_H ++ ++#define MMAL_ENCODING_H264 MMAL_FOURCC('H', '2', '6', '4') ++#define MMAL_ENCODING_H263 MMAL_FOURCC('H', '2', '6', '3') ++#define MMAL_ENCODING_MP4V MMAL_FOURCC('M', 'P', '4', 'V') ++#define MMAL_ENCODING_MP2V MMAL_FOURCC('M', 'P', '2', 'V') ++#define MMAL_ENCODING_MP1V MMAL_FOURCC('M', 'P', '1', 'V') ++#define MMAL_ENCODING_WMV3 MMAL_FOURCC('W', 'M', 'V', '3') ++#define MMAL_ENCODING_WMV2 MMAL_FOURCC('W', 'M', 'V', '2') ++#define MMAL_ENCODING_WMV1 MMAL_FOURCC('W', 'M', 'V', '1') ++#define MMAL_ENCODING_WVC1 MMAL_FOURCC('W', 'V', 'C', '1') ++#define MMAL_ENCODING_VP8 MMAL_FOURCC('V', 'P', '8', ' ') ++#define MMAL_ENCODING_VP7 MMAL_FOURCC('V', 'P', '7', ' ') ++#define MMAL_ENCODING_VP6 MMAL_FOURCC('V', 'P', '6', ' ') ++#define MMAL_ENCODING_THEORA MMAL_FOURCC('T', 'H', 'E', 'O') ++#define MMAL_ENCODING_SPARK MMAL_FOURCC('S', 'P', 'R', 'K') ++#define MMAL_ENCODING_MJPEG MMAL_FOURCC('M', 'J', 'P', 'G') ++ ++#define MMAL_ENCODING_JPEG MMAL_FOURCC('J', 'P', 'E', 'G') ++#define MMAL_ENCODING_GIF MMAL_FOURCC('G', 'I', 'F', ' ') ++#define MMAL_ENCODING_PNG MMAL_FOURCC('P', 'N', 'G', ' ') ++#define MMAL_ENCODING_PPM MMAL_FOURCC('P', 'P', 'M', ' ') ++#define MMAL_ENCODING_TGA MMAL_FOURCC('T', 'G', 'A', ' ') ++#define MMAL_ENCODING_BMP MMAL_FOURCC('B', 'M', 'P', ' ') ++ ++#define MMAL_ENCODING_I420 MMAL_FOURCC('I', '4', '2', '0') ++#define MMAL_ENCODING_I420_SLICE MMAL_FOURCC('S', '4', '2', '0') ++#define MMAL_ENCODING_YV12 MMAL_FOURCC('Y', 'V', '1', '2') ++#define MMAL_ENCODING_I422 MMAL_FOURCC('I', '4', '2', '2') ++#define MMAL_ENCODING_I422_SLICE MMAL_FOURCC('S', '4', '2', '2') ++#define MMAL_ENCODING_YUYV MMAL_FOURCC('Y', 'U', 'Y', 'V') ++#define MMAL_ENCODING_YVYU MMAL_FOURCC('Y', 'V', 'Y', 'U') ++#define MMAL_ENCODING_UYVY MMAL_FOURCC('U', 'Y', 'V', 'Y') ++#define MMAL_ENCODING_VYUY MMAL_FOURCC('V', 'Y', 'U', 'Y') ++#define MMAL_ENCODING_NV12 MMAL_FOURCC('N', 'V', '1', '2') ++#define MMAL_ENCODING_NV21 MMAL_FOURCC('N', 'V', '2', '1') ++#define MMAL_ENCODING_ARGB MMAL_FOURCC('A', 'R', 'G', 'B') ++#define MMAL_ENCODING_RGBA MMAL_FOURCC('R', 'G', 'B', 'A') ++#define MMAL_ENCODING_ABGR MMAL_FOURCC('A', 'B', 'G', 'R') ++#define MMAL_ENCODING_BGRA MMAL_FOURCC('B', 'G', 'R', 'A') ++#define MMAL_ENCODING_RGB16 MMAL_FOURCC('R', 'G', 'B', '2') ++#define MMAL_ENCODING_RGB24 MMAL_FOURCC('R', 'G', 'B', '3') ++#define MMAL_ENCODING_RGB32 MMAL_FOURCC('R', 'G', 'B', '4') ++#define MMAL_ENCODING_BGR16 MMAL_FOURCC('B', 'G', 'R', '2') ++#define MMAL_ENCODING_BGR24 MMAL_FOURCC('B', 'G', 'R', '3') ++#define MMAL_ENCODING_BGR32 MMAL_FOURCC('B', 'G', 'R', '4') ++ ++/** SAND Video (YUVUV128) format, native format understood by VideoCore. ++ * This format is *not* opaque - if requested you will receive full frames ++ * of YUV_UV video. ++ */ ++#define MMAL_ENCODING_YUVUV128 MMAL_FOURCC('S', 'A', 'N', 'D') ++ ++/** VideoCore opaque image format, image handles are returned to ++ * the host but not the actual image data. ++ */ ++#define MMAL_ENCODING_OPAQUE MMAL_FOURCC('O', 'P', 'Q', 'V') ++ ++/** An EGL image handle ++ */ ++#define MMAL_ENCODING_EGL_IMAGE MMAL_FOURCC('E', 'G', 'L', 'I') ++ ++/* }@ */ ++ ++/** \name Pre-defined audio encodings */ ++/* @{ */ ++#define MMAL_ENCODING_PCM_UNSIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'U') ++#define MMAL_ENCODING_PCM_UNSIGNED_LE MMAL_FOURCC('p', 'c', 'm', 'u') ++#define MMAL_ENCODING_PCM_SIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'S') ++#define MMAL_ENCODING_PCM_SIGNED_LE MMAL_FOURCC('p', 'c', 'm', 's') ++#define MMAL_ENCODING_PCM_FLOAT_BE MMAL_FOURCC('P', 'C', 'M', 'F') ++#define MMAL_ENCODING_PCM_FLOAT_LE MMAL_FOURCC('p', 'c', 'm', 'f') ++ ++/* Pre-defined H264 encoding variants */ ++ ++/** ISO 14496-10 Annex B byte stream format */ ++#define MMAL_ENCODING_VARIANT_H264_DEFAULT 0 ++/** ISO 14496-15 AVC stream format */ ++#define MMAL_ENCODING_VARIANT_H264_AVC1 MMAL_FOURCC('A', 'V', 'C', '1') ++/** Implicitly delineated NAL units without emulation prevention */ ++#define MMAL_ENCODING_VARIANT_H264_RAW MMAL_FOURCC('R', 'A', 'W', ' ') ++ ++/** \defgroup MmalColorSpace List of pre-defined video color spaces ++ * This defines a list of common color spaces. This list isn't exhaustive and ++ * is only provided as a convenience to avoid clients having to use FourCC ++ * codes directly. However components are allowed to define and use their own ++ * FourCC codes. ++ */ ++/* @{ */ ++ ++/** Unknown color space */ ++#define MMAL_COLOR_SPACE_UNKNOWN 0 ++/** ITU-R BT.601-5 [SDTV] */ ++#define MMAL_COLOR_SPACE_ITUR_BT601 MMAL_FOURCC('Y', '6', '0', '1') ++/** ITU-R BT.709-3 [HDTV] */ ++#define MMAL_COLOR_SPACE_ITUR_BT709 MMAL_FOURCC('Y', '7', '0', '9') ++/** JPEG JFIF */ ++#define MMAL_COLOR_SPACE_JPEG_JFIF MMAL_FOURCC('Y', 'J', 'F', 'I') ++/** Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ ++#define MMAL_COLOR_SPACE_FCC MMAL_FOURCC('Y', 'F', 'C', 'C') ++/** Society of Motion Picture and Television Engineers 240M (1999) */ ++#define MMAL_COLOR_SPACE_SMPTE240M MMAL_FOURCC('Y', '2', '4', '0') ++/** ITU-R BT.470-2 System M */ ++#define MMAL_COLOR_SPACE_BT470_2_M MMAL_FOURCC('Y', '_', '_', 'M') ++/** ITU-R BT.470-2 System BG */ ++#define MMAL_COLOR_SPACE_BT470_2_BG MMAL_FOURCC('Y', '_', 'B', 'G') ++/** JPEG JFIF, but with 16..255 luma */ ++#define MMAL_COLOR_SPACE_JFIF_Y16_255 MMAL_FOURCC('Y', 'Y', '1', '6') ++/* @} MmalColorSpace List */ ++ ++#endif /* MMAL_ENCODINGS_H */ +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg-common.h +@@ -0,0 +1,48 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom ++ */ ++ ++#ifndef MMAL_MSG_COMMON_H ++#define MMAL_MSG_COMMON_H ++ ++enum mmal_msg_status { ++ MMAL_MSG_STATUS_SUCCESS = 0, /**< Success */ ++ MMAL_MSG_STATUS_ENOMEM, /**< Out of memory */ ++ MMAL_MSG_STATUS_ENOSPC, /**< Out of resources other than memory */ ++ MMAL_MSG_STATUS_EINVAL, /**< Argument is invalid */ ++ MMAL_MSG_STATUS_ENOSYS, /**< Function not implemented */ ++ MMAL_MSG_STATUS_ENOENT, /**< No such file or directory */ ++ MMAL_MSG_STATUS_ENXIO, /**< No such device or address */ ++ MMAL_MSG_STATUS_EIO, /**< I/O error */ ++ MMAL_MSG_STATUS_ESPIPE, /**< Illegal seek */ ++ MMAL_MSG_STATUS_ECORRUPT, /**< Data is corrupt \attention */ ++ MMAL_MSG_STATUS_ENOTREADY, /**< Component is not ready */ ++ MMAL_MSG_STATUS_ECONFIG, /**< Component is not configured */ ++ MMAL_MSG_STATUS_EISCONN, /**< Port is already connected */ ++ MMAL_MSG_STATUS_ENOTCONN, /**< Port is disconnected */ ++ MMAL_MSG_STATUS_EAGAIN, /**< Resource temporarily unavailable. */ ++ MMAL_MSG_STATUS_EFAULT, /**< Bad address */ ++}; ++ ++struct mmal_rect { ++ s32 x; /**< x coordinate (from left) */ ++ s32 y; /**< y coordinate (from top) */ ++ s32 width; /**< width */ ++ s32 height; /**< height */ ++}; ++ ++struct mmal_rational { ++ s32 num; /**< Numerator */ ++ s32 den; /**< Denominator */ ++}; ++ ++#endif /* MMAL_MSG_COMMON_H */ +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg-format.h +@@ -0,0 +1,106 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom ++ */ ++ ++#ifndef MMAL_MSG_FORMAT_H ++#define MMAL_MSG_FORMAT_H ++ ++#include "mmal-msg-common.h" ++ ++/* MMAL_ES_FORMAT_T */ ++ ++struct mmal_audio_format { ++ u32 channels; /* Number of audio channels */ ++ u32 sample_rate; /* Sample rate */ ++ ++ u32 bits_per_sample; /* Bits per sample */ ++ u32 block_align; /* Size of a block of data */ ++}; ++ ++struct mmal_video_format { ++ u32 width; /* Width of frame in pixels */ ++ u32 height; /* Height of frame in rows of pixels */ ++ struct mmal_rect crop; /* Visible region of the frame */ ++ struct mmal_rational frame_rate; /* Frame rate */ ++ struct mmal_rational par; /* Pixel aspect ratio */ ++ ++ /* ++ * FourCC specifying the color space of the video stream. See the ++ * MmalColorSpace "pre-defined color spaces" for some examples. ++ */ ++ u32 color_space; ++}; ++ ++struct mmal_subpicture_format { ++ u32 x_offset; ++ u32 y_offset; ++}; ++ ++union mmal_es_specific_format { ++ struct mmal_audio_format audio; ++ struct mmal_video_format video; ++ struct mmal_subpicture_format subpicture; ++}; ++ ++/* Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ ++struct mmal_es_format_local { ++ u32 type; /* enum mmal_es_type */ ++ ++ u32 encoding; /* FourCC specifying encoding of the elementary ++ * stream. ++ */ ++ u32 encoding_variant; /* FourCC specifying the specific ++ * encoding variant of the elementary ++ * stream. ++ */ ++ ++ union mmal_es_specific_format *es; /* Type specific ++ * information for the ++ * elementary stream ++ */ ++ ++ u32 bitrate; /* Bitrate in bits per second */ ++ u32 flags; /* Flags describing properties of the elementary ++ * stream. ++ */ ++ ++ u32 extradata_size; /* Size of the codec specific data */ ++ u8 *extradata; /* Codec specific data */ ++}; ++ ++/* Remote definition of an elementary stream format (MMAL_ES_FORMAT_T) */ ++struct mmal_es_format { ++ u32 type; /* enum mmal_es_type */ ++ ++ u32 encoding; /* FourCC specifying encoding of the elementary ++ * stream. ++ */ ++ u32 encoding_variant; /* FourCC specifying the specific ++ * encoding variant of the elementary ++ * stream. ++ */ ++ ++ u32 es; /* Type specific ++ * information for the ++ * elementary stream ++ */ ++ ++ u32 bitrate; /* Bitrate in bits per second */ ++ u32 flags; /* Flags describing properties of the elementary ++ * stream. ++ */ ++ ++ u32 extradata_size; /* Size of the codec specific data */ ++ u32 extradata; /* Codec specific data */ ++}; ++ ++#endif /* MMAL_MSG_FORMAT_H */ +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg-port.h +@@ -0,0 +1,109 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom ++ */ ++ ++/* MMAL_PORT_TYPE_T */ ++enum mmal_port_type { ++ MMAL_PORT_TYPE_UNKNOWN = 0, /* Unknown port type */ ++ MMAL_PORT_TYPE_CONTROL, /* Control port */ ++ MMAL_PORT_TYPE_INPUT, /* Input port */ ++ MMAL_PORT_TYPE_OUTPUT, /* Output port */ ++ MMAL_PORT_TYPE_CLOCK, /* Clock port */ ++}; ++ ++/* The port is pass-through and doesn't need buffer headers allocated */ ++#define MMAL_PORT_CAPABILITY_PASSTHROUGH 0x01 ++/* ++ *The port wants to allocate the buffer payloads. ++ * This signals a preference that payload allocation should be done ++ * on this port for efficiency reasons. ++ */ ++#define MMAL_PORT_CAPABILITY_ALLOCATION 0x02 ++/* ++ * The port supports format change events. ++ * This applies to input ports and is used to let the client know ++ * whether the port supports being reconfigured via a format ++ * change event (i.e. without having to disable the port). ++ */ ++#define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE 0x04 ++ ++/* ++ * mmal port structure (MMAL_PORT_T) ++ * ++ * most elements are informational only, the pointer values for ++ * interogation messages are generally provided as additional ++ * structures within the message. When used to set values only the ++ * buffer_num, buffer_size and userdata parameters are writable. ++ */ ++struct mmal_port { ++ u32 priv; /* Private member used by the framework */ ++ u32 name; /* Port name. Used for debugging purposes (RO) */ ++ ++ u32 type; /* Type of the port (RO) enum mmal_port_type */ ++ u16 index; /* Index of the port in its type list (RO) */ ++ u16 index_all; /* Index of the port in the list of all ports (RO) */ ++ ++ u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ ++ u32 format; /* Format of the elementary stream */ ++ ++ u32 buffer_num_min; /* Minimum number of buffers the port ++ * requires (RO). This is set by the ++ * component. ++ */ ++ ++ u32 buffer_size_min; /* Minimum size of buffers the port ++ * requires (RO). This is set by the ++ * component. ++ */ ++ ++ u32 buffer_alignment_min;/* Minimum alignment requirement for ++ * the buffers (RO). A value of ++ * zero means no special alignment ++ * requirements. This is set by the ++ * component. ++ */ ++ ++ u32 buffer_num_recommended; /* Number of buffers the port ++ * recommends for optimal ++ * performance (RO). A value of ++ * zero means no special ++ * recommendation. This is set ++ * by the component. ++ */ ++ ++ u32 buffer_size_recommended; /* Size of buffers the port ++ * recommends for optimal ++ * performance (RO). A value of ++ * zero means no special ++ * recommendation. This is set ++ * by the component. ++ */ ++ ++ u32 buffer_num; /* Actual number of buffers the port will use. ++ * This is set by the client. ++ */ ++ ++ u32 buffer_size; /* Actual maximum size of the buffers that ++ * will be sent to the port. This is set by ++ * the client. ++ */ ++ ++ u32 component; /* Component this port belongs to (Read Only) */ ++ ++ u32 userdata; /* Field reserved for use by the client */ ++ ++ u32 capabilities; /* Flags describing the capabilities of a ++ * port (RO). Bitwise combination of \ref ++ * portcapabilities "Port capabilities" ++ * values. ++ */ ++}; +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h +@@ -0,0 +1,406 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom ++ */ ++ ++/* ++ * all the data structures which serialise the MMAL protocol. note ++ * these are directly mapped onto the recived message data. ++ * ++ * BEWARE: They seem to *assume* pointers are u32 and that there is no ++ * structure padding! ++ * ++ * NOTE: this implementation uses kernel types to ensure sizes. Rather ++ * than assigning values to enums to force their size the ++ * implementation uses fixed size types and not the enums (though the ++ * comments have the actual enum type ++ */ ++#ifndef MMAL_MSG_H ++#define MMAL_MSG_H ++ ++#define VC_MMAL_VER 15 ++#define VC_MMAL_MIN_VER 10 ++#define VC_MMAL_SERVER_NAME MAKE_FOURCC("mmal") ++ ++/* max total message size is 512 bytes */ ++#define MMAL_MSG_MAX_SIZE 512 ++/* with six 32bit header elements max payload is therefore 488 bytes */ ++#define MMAL_MSG_MAX_PAYLOAD 488 ++ ++#include "mmal-msg-common.h" ++#include "mmal-msg-format.h" ++#include "mmal-msg-port.h" ++ ++enum mmal_msg_type { ++ MMAL_MSG_TYPE_QUIT = 1, ++ MMAL_MSG_TYPE_SERVICE_CLOSED, ++ MMAL_MSG_TYPE_GET_VERSION, ++ MMAL_MSG_TYPE_COMPONENT_CREATE, ++ MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ ++ MMAL_MSG_TYPE_COMPONENT_ENABLE, ++ MMAL_MSG_TYPE_COMPONENT_DISABLE, ++ MMAL_MSG_TYPE_PORT_INFO_GET, ++ MMAL_MSG_TYPE_PORT_INFO_SET, ++ MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ ++ MMAL_MSG_TYPE_BUFFER_FROM_HOST, ++ MMAL_MSG_TYPE_BUFFER_TO_HOST, ++ MMAL_MSG_TYPE_GET_STATS, ++ MMAL_MSG_TYPE_PORT_PARAMETER_SET, ++ MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ ++ MMAL_MSG_TYPE_EVENT_TO_HOST, ++ MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT, ++ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR, ++ MMAL_MSG_TYPE_CONSUME_MEM, ++ MMAL_MSG_TYPE_LMK, /* 20 */ ++ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC, ++ MMAL_MSG_TYPE_DRM_GET_LHS32, ++ MMAL_MSG_TYPE_DRM_GET_TIME, ++ MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN, ++ MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ ++ MMAL_MSG_TYPE_HOST_LOG, ++ MMAL_MSG_TYPE_MSG_LAST ++}; ++ ++/* port action request messages differ depending on the action type */ ++enum mmal_msg_port_action_type { ++ MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unknown action */ ++ MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ ++ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ ++ MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/ ++}; ++ ++struct mmal_msg_header { ++ u32 magic; ++ u32 type; /* enum mmal_msg_type */ ++ ++ /* Opaque handle to the control service */ ++ u32 control_service; ++ ++ u32 context; /* a u32 per message context */ ++ u32 status; /* The status of the vchiq operation */ ++ u32 padding; ++}; ++ ++/* Send from VC to host to report version */ ++struct mmal_msg_version { ++ u32 flags; ++ u32 major; ++ u32 minor; ++ u32 minimum; ++}; ++ ++/* request to VC to create component */ ++struct mmal_msg_component_create { ++ u32 client_component; /* component context */ ++ char name[128]; ++ u32 pid; /* For debug */ ++}; ++ ++/* reply from VC to component creation request */ ++struct mmal_msg_component_create_reply { ++ u32 status; /* enum mmal_msg_status - how does this differ to ++ * the one in the header? ++ */ ++ u32 component_handle; /* VideoCore handle for component */ ++ u32 input_num; /* Number of input ports */ ++ u32 output_num; /* Number of output ports */ ++ u32 clock_num; /* Number of clock ports */ ++}; ++ ++/* request to VC to destroy a component */ ++struct mmal_msg_component_destroy { ++ u32 component_handle; ++}; ++ ++struct mmal_msg_component_destroy_reply { ++ u32 status; /* The component destruction status */ ++}; ++ ++/* request and reply to VC to enable a component */ ++struct mmal_msg_component_enable { ++ u32 component_handle; ++}; ++ ++struct mmal_msg_component_enable_reply { ++ u32 status; /* The component enable status */ ++}; ++ ++/* request and reply to VC to disable a component */ ++struct mmal_msg_component_disable { ++ u32 component_handle; ++}; ++ ++struct mmal_msg_component_disable_reply { ++ u32 status; /* The component disable status */ ++}; ++ ++/* request to VC to get port information */ ++struct mmal_msg_port_info_get { ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 index; /* port index to query */ ++}; ++ ++/* reply from VC to get port info request */ ++struct mmal_msg_port_info_get_reply { ++ u32 status; /* enum mmal_msg_status */ ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 port_index; /* port indexed in query */ ++ s32 found; /* unused */ ++ u32 port_handle; /* Handle to use for this port */ ++ struct mmal_port port; ++ struct mmal_es_format format; /* elementary stream format */ ++ union mmal_es_specific_format es; /* es type specific data */ ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; /* es extra data */ ++}; ++ ++/* request to VC to set port information */ ++struct mmal_msg_port_info_set { ++ u32 component_handle; ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 port_index; /* port indexed in query */ ++ struct mmal_port port; ++ struct mmal_es_format format; ++ union mmal_es_specific_format es; ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; ++}; ++ ++/* reply from VC to port info set request */ ++struct mmal_msg_port_info_set_reply { ++ u32 status; ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 index; /* port indexed in query */ ++ s32 found; /* unused */ ++ u32 port_handle; /* Handle to use for this port */ ++ struct mmal_port port; ++ struct mmal_es_format format; ++ union mmal_es_specific_format es; ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; ++}; ++ ++/* port action requests that take a mmal_port as a parameter */ ++struct mmal_msg_port_action_port { ++ u32 component_handle; ++ u32 port_handle; ++ u32 action; /* enum mmal_msg_port_action_type */ ++ struct mmal_port port; ++}; ++ ++/* port action requests that take handles as a parameter */ ++struct mmal_msg_port_action_handle { ++ u32 component_handle; ++ u32 port_handle; ++ u32 action; /* enum mmal_msg_port_action_type */ ++ u32 connect_component_handle; ++ u32 connect_port_handle; ++}; ++ ++struct mmal_msg_port_action_reply { ++ u32 status; /* The port action operation status */ ++}; ++ ++/* MMAL buffer transfer */ ++ ++/* Size of space reserved in a buffer message for short messages. */ ++#define MMAL_VC_SHORT_DATA 128 ++ ++/* Signals that the current payload is the end of the stream of data */ ++#define MMAL_BUFFER_HEADER_FLAG_EOS BIT(0) ++/* Signals that the start of the current payload starts a frame */ ++#define MMAL_BUFFER_HEADER_FLAG_FRAME_START BIT(1) ++/* Signals that the end of the current payload ends a frame */ ++#define MMAL_BUFFER_HEADER_FLAG_FRAME_END BIT(2) ++/* Signals that the current payload contains only complete frames (>1) */ ++#define MMAL_BUFFER_HEADER_FLAG_FRAME \ ++ (MMAL_BUFFER_HEADER_FLAG_FRAME_START | \ ++ MMAL_BUFFER_HEADER_FLAG_FRAME_END) ++/* Signals that the current payload is a keyframe (i.e. self decodable) */ ++#define MMAL_BUFFER_HEADER_FLAG_KEYFRAME BIT(3) ++/* ++ * Signals a discontinuity in the stream of data (e.g. after a seek). ++ * Can be used for instance by a decoder to reset its state ++ */ ++#define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY BIT(4) ++/* ++ * Signals a buffer containing some kind of config data for the component ++ * (e.g. codec config data) ++ */ ++#define MMAL_BUFFER_HEADER_FLAG_CONFIG BIT(5) ++/* Signals an encrypted payload */ ++#define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED BIT(6) ++/* Signals a buffer containing side information */ ++#define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO BIT(7) ++/* ++ * Signals a buffer which is the snapshot/postview image from a stills ++ * capture ++ */ ++#define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT BIT(8) ++/* Signals a buffer which contains data known to be corrupted */ ++#define MMAL_BUFFER_HEADER_FLAG_CORRUPTED BIT(9) ++/* Signals that a buffer failed to be transmitted */ ++#define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED BIT(10) ++ ++struct mmal_driver_buffer { ++ u32 magic; ++ u32 component_handle; ++ u32 port_handle; ++ u32 client_context; ++}; ++ ++/* buffer header */ ++struct mmal_buffer_header { ++ u32 next; /* next header */ ++ u32 priv; /* framework private data */ ++ u32 cmd; ++ u32 data; ++ u32 alloc_size; ++ u32 length; ++ u32 offset; ++ u32 flags; ++ s64 pts; ++ s64 dts; ++ u32 type; ++ u32 user_data; ++}; ++ ++struct mmal_buffer_header_type_specific { ++ union { ++ struct { ++ u32 planes; ++ u32 offset[4]; ++ u32 pitch[4]; ++ u32 flags; ++ } video; ++ } u; ++}; ++ ++struct mmal_msg_buffer_from_host { ++ /* ++ *The front 32 bytes of the buffer header are copied ++ * back to us in the reply to allow for context. This ++ * area is used to store two mmal_driver_buffer structures to ++ * allow for multiple concurrent service users. ++ */ ++ /* control data */ ++ struct mmal_driver_buffer drvbuf; ++ ++ /* referenced control data for passthrough buffer management */ ++ struct mmal_driver_buffer drvbuf_ref; ++ struct mmal_buffer_header buffer_header; /* buffer header itself */ ++ struct mmal_buffer_header_type_specific buffer_header_type_specific; ++ s32 is_zero_copy; ++ s32 has_reference; ++ ++ /* allows short data to be xfered in control message */ ++ u32 payload_in_message; ++ u8 short_data[MMAL_VC_SHORT_DATA]; ++}; ++ ++/* port parameter setting */ ++ ++#define MMAL_WORKER_PORT_PARAMETER_SPACE 96 ++ ++struct mmal_msg_port_parameter_set { ++ u32 component_handle; /* component */ ++ u32 port_handle; /* port */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ ++ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; ++}; ++ ++struct mmal_msg_port_parameter_set_reply { ++ u32 status; /* enum mmal_msg_status todo: how does this ++ * differ to the one in the header? ++ */ ++}; ++ ++/* port parameter getting */ ++ ++struct mmal_msg_port_parameter_get { ++ u32 component_handle; /* component */ ++ u32 port_handle; /* port */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ ++}; ++ ++struct mmal_msg_port_parameter_get_reply { ++ u32 status; /* Status of mmal_port_parameter_get call */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ ++ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; ++}; ++ ++/* event messages */ ++#define MMAL_WORKER_EVENT_SPACE 256 ++ ++struct mmal_msg_event_to_host { ++ u32 client_component; /* component context */ ++ ++ u32 port_type; ++ u32 port_num; ++ ++ u32 cmd; ++ u32 length; ++ u8 data[MMAL_WORKER_EVENT_SPACE]; ++ u32 delayed_buffer; ++}; ++ ++/* all mmal messages are serialised through this structure */ ++struct mmal_msg { ++ /* header */ ++ struct mmal_msg_header h; ++ /* payload */ ++ union { ++ struct mmal_msg_version version; ++ ++ struct mmal_msg_component_create component_create; ++ struct mmal_msg_component_create_reply component_create_reply; ++ ++ struct mmal_msg_component_destroy component_destroy; ++ struct mmal_msg_component_destroy_reply component_destroy_reply; ++ ++ struct mmal_msg_component_enable component_enable; ++ struct mmal_msg_component_enable_reply component_enable_reply; ++ ++ struct mmal_msg_component_disable component_disable; ++ struct mmal_msg_component_disable_reply component_disable_reply; ++ ++ struct mmal_msg_port_info_get port_info_get; ++ struct mmal_msg_port_info_get_reply port_info_get_reply; ++ ++ struct mmal_msg_port_info_set port_info_set; ++ struct mmal_msg_port_info_set_reply port_info_set_reply; ++ ++ struct mmal_msg_port_action_port port_action_port; ++ struct mmal_msg_port_action_handle port_action_handle; ++ struct mmal_msg_port_action_reply port_action_reply; ++ ++ struct mmal_msg_buffer_from_host buffer_from_host; ++ ++ struct mmal_msg_port_parameter_set port_parameter_set; ++ struct mmal_msg_port_parameter_set_reply ++ port_parameter_set_reply; ++ struct mmal_msg_port_parameter_get ++ port_parameter_get; ++ struct mmal_msg_port_parameter_get_reply ++ port_parameter_get_reply; ++ ++ struct mmal_msg_event_to_host event_to_host; ++ ++ u8 payload[MMAL_MSG_MAX_PAYLOAD]; ++ } u; ++}; ++#endif +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h +@@ -0,0 +1,755 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom ++ */ ++ ++/* common parameters */ ++ ++/** @name Parameter groups ++ * Parameters are divided into groups, and then allocated sequentially within ++ * a group using an enum. ++ * @{ ++ */ ++ ++#ifndef MMAL_PARAMETERS_H ++#define MMAL_PARAMETERS_H ++ ++/** Common parameter ID group, used with many types of component. */ ++#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) ++/** Camera-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) ++/** Video-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) ++/** Audio-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) ++/** Clock-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) ++/** Miracast-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) ++ ++/* Common parameters */ ++enum mmal_parameter_common_type { ++ /**< Never a valid parameter ID */ ++ MMAL_PARAMETER_UNUSED = MMAL_PARAMETER_GROUP_COMMON, ++ ++ /**< MMAL_PARAMETER_ENCODING_T */ ++ MMAL_PARAMETER_SUPPORTED_ENCODINGS, ++ /**< MMAL_PARAMETER_URI_T */ ++ MMAL_PARAMETER_URI, ++ /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ ++ MMAL_PARAMETER_CHANGE_EVENT_REQUEST, ++ /** MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ZERO_COPY, ++ /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ ++ MMAL_PARAMETER_BUFFER_REQUIREMENTS, ++ /**< MMAL_PARAMETER_STATISTICS_T */ ++ MMAL_PARAMETER_STATISTICS, ++ /**< MMAL_PARAMETER_CORE_STATISTICS_T */ ++ MMAL_PARAMETER_CORE_STATISTICS, ++ /**< MMAL_PARAMETER_MEM_USAGE_T */ ++ MMAL_PARAMETER_MEM_USAGE, ++ /**< MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_BUFFER_FLAG_FILTER, ++ /**< MMAL_PARAMETER_SEEK_T */ ++ MMAL_PARAMETER_SEEK, ++ /**< MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_POWERMON_ENABLE, ++ /**< MMAL_PARAMETER_LOGGING_T */ ++ MMAL_PARAMETER_LOGGING, ++ /**< MMAL_PARAMETER_UINT64_T */ ++ MMAL_PARAMETER_SYSTEM_TIME, ++ /**< MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_NO_IMAGE_PADDING, ++}; ++ ++/* camera parameters */ ++ ++enum mmal_parameter_camera_type { ++ /* 0 */ ++ /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ ++ MMAL_PARAMETER_THUMBNAIL_CONFIGURATION = ++ MMAL_PARAMETER_GROUP_CAMERA, ++ /**< Unused? */ ++ MMAL_PARAMETER_CAPTURE_QUALITY, ++ /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_ROTATION, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_EXIF_DISABLE, ++ /**< @ref MMAL_PARAMETER_EXIF_T */ ++ MMAL_PARAMETER_EXIF, ++ /**< @ref MMAL_PARAM_AWBMODE_T */ ++ MMAL_PARAMETER_AWB_MODE, ++ /**< @ref MMAL_PARAMETER_IMAGEFX_T */ ++ MMAL_PARAMETER_IMAGE_EFFECT, ++ /**< @ref MMAL_PARAMETER_COLOURFX_T */ ++ MMAL_PARAMETER_COLOUR_EFFECT, ++ /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ ++ MMAL_PARAMETER_FLICKER_AVOID, ++ /**< @ref MMAL_PARAMETER_FLASH_T */ ++ MMAL_PARAMETER_FLASH, ++ /**< @ref MMAL_PARAMETER_REDEYE_T */ ++ MMAL_PARAMETER_REDEYE, ++ /**< @ref MMAL_PARAMETER_FOCUS_T */ ++ MMAL_PARAMETER_FOCUS, ++ /**< Unused? */ ++ MMAL_PARAMETER_FOCAL_LENGTHS, ++ /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_EXPOSURE_COMP, ++ /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ ++ MMAL_PARAMETER_ZOOM, ++ /**< @ref MMAL_PARAMETER_MIRROR_T */ ++ MMAL_PARAMETER_MIRROR, ++ ++ /* 0x10 */ ++ /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAMERA_NUM, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAPTURE, ++ /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ ++ MMAL_PARAMETER_EXP_METERING_MODE, ++ /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ ++ MMAL_PARAMETER_FOCUS_STATUS, ++ /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ ++ MMAL_PARAMETER_CAMERA_CONFIG, ++ /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ ++ MMAL_PARAMETER_CAPTURE_STATUS, ++ /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ ++ MMAL_PARAMETER_FACE_TRACK, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, ++ /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_JPEG_Q_FACTOR, ++ /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ ++ MMAL_PARAMETER_FRAME_RATE, ++ /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ ++ MMAL_PARAMETER_USE_STC, ++ /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ ++ MMAL_PARAMETER_CAMERA_INFO, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_STABILISATION, ++ /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ ++ MMAL_PARAMETER_FACE_TRACK_RESULTS, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ENABLE_RAW_CAPTURE, ++ ++ /* 0x20 */ ++ /**< @ref MMAL_PARAMETER_URI_T */ ++ MMAL_PARAMETER_DPF_FILE, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ENABLE_DPF_FILE, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_DPF_FAIL_IS_FATAL, ++ /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ ++ MMAL_PARAMETER_CAPTURE_MODE, ++ /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ ++ MMAL_PARAMETER_FOCUS_REGIONS, ++ /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ ++ MMAL_PARAMETER_INPUT_CROP, ++ /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ ++ MMAL_PARAMETER_SENSOR_INFORMATION, ++ /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ ++ MMAL_PARAMETER_FLASH_SELECT, ++ /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ ++ MMAL_PARAMETER_FIELD_OF_VIEW, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, ++ /**< @ref MMAL_PARAMETER_DRC_T */ ++ MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, ++ /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ ++ MMAL_PARAMETER_ALGORITHM_CONTROL, ++ /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_SHARPNESS, ++ /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_CONTRAST, ++ /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_BRIGHTNESS, ++ /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_SATURATION, ++ ++ /* 0x30 */ ++ /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_ISO, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ANTISHAKE, ++ /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ ++ MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAMERA_BURST_CAPTURE, ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAMERA_MIN_ISO, ++ /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ ++ MMAL_PARAMETER_CAMERA_USE_CASE, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAPTURE_STATS_PASS, ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ENABLE_REGISTER_FILE, ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL, ++ /** @ref MMAL_PARAMETER_CONFIGFILE_T */ ++ MMAL_PARAMETER_CONFIGFILE_REGISTERS, ++ /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ ++ MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_JPEG_ATTACH_LOG, ++ /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ ++ MMAL_PARAMETER_ZERO_SHUTTER_LAG, ++ /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ ++ MMAL_PARAMETER_FPS_RANGE, ++ /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, ++ ++ /* 0x40 */ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_SW_SHARPEN_DISABLE, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_FLASH_REQUIRED, ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_SW_SATURATION_DISABLE, ++ /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ ++ MMAL_PARAMETER_CUSTOM_AWB_GAINS, ++}; ++ ++struct mmal_parameter_rational { ++ s32 num; /**< Numerator */ ++ s32 den; /**< Denominator */ ++}; ++ ++enum mmal_parameter_camera_config_timestamp_mode { ++ MMAL_PARAM_TIMESTAMP_MODE_ZERO = 0, /* Always timestamp frames as 0 */ ++ MMAL_PARAM_TIMESTAMP_MODE_RAW_STC, /* Use the raw STC value ++ * for the frame timestamp ++ */ ++ MMAL_PARAM_TIMESTAMP_MODE_RESET_STC, /* Use the STC timestamp ++ * but subtract the ++ * timestamp of the first ++ * frame sent to give a ++ * zero based timestamp. ++ */ ++}; ++ ++struct mmal_parameter_fps_range { ++ /**< Low end of the permitted framerate range */ ++ struct mmal_parameter_rational fps_low; ++ /**< High end of the permitted framerate range */ ++ struct mmal_parameter_rational fps_high; ++}; ++ ++/* camera configuration parameter */ ++struct mmal_parameter_camera_config { ++ /* Parameters for setting up the image pools */ ++ u32 max_stills_w; /* Max size of stills capture */ ++ u32 max_stills_h; ++ u32 stills_yuv422; /* Allow YUV422 stills capture */ ++ u32 one_shot_stills; /* Continuous or one shot stills captures. */ ++ ++ u32 max_preview_video_w; /* Max size of the preview or video ++ * capture frames ++ */ ++ u32 max_preview_video_h; ++ u32 num_preview_video_frames; ++ ++ /** Sets the height of the circular buffer for stills capture. */ ++ u32 stills_capture_circular_buffer_height; ++ ++ /** Allows preview/encode to resume as fast as possible after the stills ++ * input frame has been received, and then processes the still frame in ++ * the background whilst preview/encode has resumed. ++ * Actual mode is controlled by MMAL_PARAMETER_CAPTURE_MODE. ++ */ ++ u32 fast_preview_resume; ++ ++ /** Selects algorithm for timestamping frames if ++ * there is no clock component connected. ++ * enum mmal_parameter_camera_config_timestamp_mode ++ */ ++ s32 use_stc_timestamp; ++}; ++ ++enum mmal_parameter_exposuremode { ++ MMAL_PARAM_EXPOSUREMODE_OFF, ++ MMAL_PARAM_EXPOSUREMODE_AUTO, ++ MMAL_PARAM_EXPOSUREMODE_NIGHT, ++ MMAL_PARAM_EXPOSUREMODE_NIGHTPREVIEW, ++ MMAL_PARAM_EXPOSUREMODE_BACKLIGHT, ++ MMAL_PARAM_EXPOSUREMODE_SPOTLIGHT, ++ MMAL_PARAM_EXPOSUREMODE_SPORTS, ++ MMAL_PARAM_EXPOSUREMODE_SNOW, ++ MMAL_PARAM_EXPOSUREMODE_BEACH, ++ MMAL_PARAM_EXPOSUREMODE_VERYLONG, ++ MMAL_PARAM_EXPOSUREMODE_FIXEDFPS, ++ MMAL_PARAM_EXPOSUREMODE_ANTISHAKE, ++ MMAL_PARAM_EXPOSUREMODE_FIREWORKS, ++}; ++ ++enum mmal_parameter_exposuremeteringmode { ++ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX, ++}; ++ ++enum mmal_parameter_awbmode { ++ MMAL_PARAM_AWBMODE_OFF, ++ MMAL_PARAM_AWBMODE_AUTO, ++ MMAL_PARAM_AWBMODE_SUNLIGHT, ++ MMAL_PARAM_AWBMODE_CLOUDY, ++ MMAL_PARAM_AWBMODE_SHADE, ++ MMAL_PARAM_AWBMODE_TUNGSTEN, ++ MMAL_PARAM_AWBMODE_FLUORESCENT, ++ MMAL_PARAM_AWBMODE_INCANDESCENT, ++ MMAL_PARAM_AWBMODE_FLASH, ++ MMAL_PARAM_AWBMODE_HORIZON, ++}; ++ ++enum mmal_parameter_imagefx { ++ MMAL_PARAM_IMAGEFX_NONE, ++ MMAL_PARAM_IMAGEFX_NEGATIVE, ++ MMAL_PARAM_IMAGEFX_SOLARIZE, ++ MMAL_PARAM_IMAGEFX_POSTERIZE, ++ MMAL_PARAM_IMAGEFX_WHITEBOARD, ++ MMAL_PARAM_IMAGEFX_BLACKBOARD, ++ MMAL_PARAM_IMAGEFX_SKETCH, ++ MMAL_PARAM_IMAGEFX_DENOISE, ++ MMAL_PARAM_IMAGEFX_EMBOSS, ++ MMAL_PARAM_IMAGEFX_OILPAINT, ++ MMAL_PARAM_IMAGEFX_HATCH, ++ MMAL_PARAM_IMAGEFX_GPEN, ++ MMAL_PARAM_IMAGEFX_PASTEL, ++ MMAL_PARAM_IMAGEFX_WATERCOLOUR, ++ MMAL_PARAM_IMAGEFX_FILM, ++ MMAL_PARAM_IMAGEFX_BLUR, ++ MMAL_PARAM_IMAGEFX_SATURATION, ++ MMAL_PARAM_IMAGEFX_COLOURSWAP, ++ MMAL_PARAM_IMAGEFX_WASHEDOUT, ++ MMAL_PARAM_IMAGEFX_POSTERISE, ++ MMAL_PARAM_IMAGEFX_COLOURPOINT, ++ MMAL_PARAM_IMAGEFX_COLOURBALANCE, ++ MMAL_PARAM_IMAGEFX_CARTOON, ++}; ++ ++enum MMAL_PARAM_FLICKERAVOID_T { ++ MMAL_PARAM_FLICKERAVOID_OFF, ++ MMAL_PARAM_FLICKERAVOID_AUTO, ++ MMAL_PARAM_FLICKERAVOID_50HZ, ++ MMAL_PARAM_FLICKERAVOID_60HZ, ++ MMAL_PARAM_FLICKERAVOID_MAX = 0x7FFFFFFF ++}; ++ ++struct mmal_parameter_awbgains { ++ struct mmal_parameter_rational r_gain; /**< Red gain */ ++ struct mmal_parameter_rational b_gain; /**< Blue gain */ ++}; ++ ++/** Manner of video rate control */ ++enum mmal_parameter_rate_control_mode { ++ MMAL_VIDEO_RATECONTROL_DEFAULT, ++ MMAL_VIDEO_RATECONTROL_VARIABLE, ++ MMAL_VIDEO_RATECONTROL_CONSTANT, ++ MMAL_VIDEO_RATECONTROL_VARIABLE_SKIP_FRAMES, ++ MMAL_VIDEO_RATECONTROL_CONSTANT_SKIP_FRAMES ++}; ++ ++enum mmal_video_profile { ++ MMAL_VIDEO_PROFILE_H263_BASELINE, ++ MMAL_VIDEO_PROFILE_H263_H320CODING, ++ MMAL_VIDEO_PROFILE_H263_BACKWARDCOMPATIBLE, ++ MMAL_VIDEO_PROFILE_H263_ISWV2, ++ MMAL_VIDEO_PROFILE_H263_ISWV3, ++ MMAL_VIDEO_PROFILE_H263_HIGHCOMPRESSION, ++ MMAL_VIDEO_PROFILE_H263_INTERNET, ++ MMAL_VIDEO_PROFILE_H263_INTERLACE, ++ MMAL_VIDEO_PROFILE_H263_HIGHLATENCY, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLE, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLESCALABLE, ++ MMAL_VIDEO_PROFILE_MP4V_CORE, ++ MMAL_VIDEO_PROFILE_MP4V_MAIN, ++ MMAL_VIDEO_PROFILE_MP4V_NBIT, ++ MMAL_VIDEO_PROFILE_MP4V_SCALABLETEXTURE, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFACE, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFBA, ++ MMAL_VIDEO_PROFILE_MP4V_BASICANIMATED, ++ MMAL_VIDEO_PROFILE_MP4V_HYBRID, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDREALTIME, ++ MMAL_VIDEO_PROFILE_MP4V_CORESCALABLE, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCODING, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCORE, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSCALABLE, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSIMPLE, ++ MMAL_VIDEO_PROFILE_H264_BASELINE, ++ MMAL_VIDEO_PROFILE_H264_MAIN, ++ MMAL_VIDEO_PROFILE_H264_EXTENDED, ++ MMAL_VIDEO_PROFILE_H264_HIGH, ++ MMAL_VIDEO_PROFILE_H264_HIGH10, ++ MMAL_VIDEO_PROFILE_H264_HIGH422, ++ MMAL_VIDEO_PROFILE_H264_HIGH444, ++ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE, ++ MMAL_VIDEO_PROFILE_DUMMY = 0x7FFFFFFF ++}; ++ ++enum mmal_video_level { ++ MMAL_VIDEO_LEVEL_H263_10, ++ MMAL_VIDEO_LEVEL_H263_20, ++ MMAL_VIDEO_LEVEL_H263_30, ++ MMAL_VIDEO_LEVEL_H263_40, ++ MMAL_VIDEO_LEVEL_H263_45, ++ MMAL_VIDEO_LEVEL_H263_50, ++ MMAL_VIDEO_LEVEL_H263_60, ++ MMAL_VIDEO_LEVEL_H263_70, ++ MMAL_VIDEO_LEVEL_MP4V_0, ++ MMAL_VIDEO_LEVEL_MP4V_0b, ++ MMAL_VIDEO_LEVEL_MP4V_1, ++ MMAL_VIDEO_LEVEL_MP4V_2, ++ MMAL_VIDEO_LEVEL_MP4V_3, ++ MMAL_VIDEO_LEVEL_MP4V_4, ++ MMAL_VIDEO_LEVEL_MP4V_4a, ++ MMAL_VIDEO_LEVEL_MP4V_5, ++ MMAL_VIDEO_LEVEL_MP4V_6, ++ MMAL_VIDEO_LEVEL_H264_1, ++ MMAL_VIDEO_LEVEL_H264_1b, ++ MMAL_VIDEO_LEVEL_H264_11, ++ MMAL_VIDEO_LEVEL_H264_12, ++ MMAL_VIDEO_LEVEL_H264_13, ++ MMAL_VIDEO_LEVEL_H264_2, ++ MMAL_VIDEO_LEVEL_H264_21, ++ MMAL_VIDEO_LEVEL_H264_22, ++ MMAL_VIDEO_LEVEL_H264_3, ++ MMAL_VIDEO_LEVEL_H264_31, ++ MMAL_VIDEO_LEVEL_H264_32, ++ MMAL_VIDEO_LEVEL_H264_4, ++ MMAL_VIDEO_LEVEL_H264_41, ++ MMAL_VIDEO_LEVEL_H264_42, ++ MMAL_VIDEO_LEVEL_H264_5, ++ MMAL_VIDEO_LEVEL_H264_51, ++ MMAL_VIDEO_LEVEL_DUMMY = 0x7FFFFFFF ++}; ++ ++struct mmal_parameter_video_profile { ++ enum mmal_video_profile profile; ++ enum mmal_video_level level; ++}; ++ ++/* video parameters */ ++ ++enum mmal_parameter_video_type { ++ /** @ref MMAL_DISPLAYREGION_T */ ++ MMAL_PARAMETER_DISPLAYREGION = MMAL_PARAMETER_GROUP_VIDEO, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ ++ MMAL_PARAMETER_SUPPORTED_PROFILES, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ ++ MMAL_PARAMETER_PROFILE, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_INTRAPERIOD, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_RATECONTROL_T */ ++ MMAL_PARAMETER_RATECONTROL, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_NALUNITFORMAT_T */ ++ MMAL_PARAMETER_NALUNITFORMAT, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_MINIMISE_FRAGMENTATION, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. ++ * Setting the value to zero resets to the default (one slice per ++ * frame). ++ */ ++ MMAL_PARAMETER_MB_ROWS_PER_SLICE, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION_T */ ++ MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_EEDE_ENABLE_T */ ++ MMAL_PARAMETER_VIDEO_EEDE_ENABLE, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE_T */ ++ MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. Request an I-frame. */ ++ MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME, ++ /** @ref MMAL_PARAMETER_VIDEO_INTRA_REFRESH_T */ ++ MMAL_PARAMETER_VIDEO_INTRA_REFRESH, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. Run-time bit rate control */ ++ MMAL_PARAMETER_VIDEO_BIT_RATE, ++ ++ /** @ref MMAL_PARAMETER_FRAME_RATE_T */ ++ MMAL_PARAMETER_VIDEO_FRAME_RATE, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_MIN_QUANT, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_MAX_QUANT, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL, ++ ++ MMAL_PARAMETER_EXTRA_BUFFERS, /**< @ref MMAL_PARAMETER_UINT32_T. */ ++ /** @ref MMAL_PARAMETER_UINT32_T. ++ * Changing this parameter from the default can reduce frame rate ++ * because image buffers need to be re-pitched. ++ */ ++ MMAL_PARAMETER_VIDEO_ALIGN_HORIZ, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. ++ * Changing this parameter from the default can reduce frame rate ++ * because image buffers need to be re-pitched. ++ */ ++ MMAL_PARAMETER_VIDEO_ALIGN_VERT, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAMES, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_INITIAL_QUANT, ++ ++ /**< @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_QP_P, ++ ++ /**< @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_RC_SLICE_DQUANT, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_FRAME_LIMIT_BITS, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_PEAK_RATE, ++ ++ /* H264 specific parameters */ ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_DISABLE_CABAC, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_LATENCY, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_AU_DELIMITERS, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_DEBLOCK_IDC, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_ENCODER_H264_MB_INTRA_MODES_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_MB_INTRA_MODE, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_HEADER_ON_OPEN, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_PRECODE_FOR_QP, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_DRM_INIT_INFO_T. */ ++ MMAL_PARAMETER_VIDEO_DRM_INIT_INFO, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_TIMESTAMP_FIFO, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_DECODE_ERROR_CONCEALMENT, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER_T. */ ++ MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER, ++ ++ /** @ref MMAL_PARAMETER_BYTES_T */ ++ MMAL_PARAMETER_VIDEO_DECODE_CONFIG_VD3, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_VCL_HRD_PARAMETERS, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER ++}; ++ ++/** Valid mirror modes */ ++enum mmal_parameter_mirror { ++ MMAL_PARAM_MIRROR_NONE, ++ MMAL_PARAM_MIRROR_VERTICAL, ++ MMAL_PARAM_MIRROR_HORIZONTAL, ++ MMAL_PARAM_MIRROR_BOTH, ++}; ++ ++enum mmal_parameter_displaytransform { ++ MMAL_DISPLAY_ROT0 = 0, ++ MMAL_DISPLAY_MIRROR_ROT0 = 1, ++ MMAL_DISPLAY_MIRROR_ROT180 = 2, ++ MMAL_DISPLAY_ROT180 = 3, ++ MMAL_DISPLAY_MIRROR_ROT90 = 4, ++ MMAL_DISPLAY_ROT270 = 5, ++ MMAL_DISPLAY_ROT90 = 6, ++ MMAL_DISPLAY_MIRROR_ROT270 = 7, ++}; ++ ++enum mmal_parameter_displaymode { ++ MMAL_DISPLAY_MODE_FILL = 0, ++ MMAL_DISPLAY_MODE_LETTERBOX = 1, ++}; ++ ++enum mmal_parameter_displayset { ++ MMAL_DISPLAY_SET_NONE = 0, ++ MMAL_DISPLAY_SET_NUM = 1, ++ MMAL_DISPLAY_SET_FULLSCREEN = 2, ++ MMAL_DISPLAY_SET_TRANSFORM = 4, ++ MMAL_DISPLAY_SET_DEST_RECT = 8, ++ MMAL_DISPLAY_SET_SRC_RECT = 0x10, ++ MMAL_DISPLAY_SET_MODE = 0x20, ++ MMAL_DISPLAY_SET_PIXEL = 0x40, ++ MMAL_DISPLAY_SET_NOASPECT = 0x80, ++ MMAL_DISPLAY_SET_LAYER = 0x100, ++ MMAL_DISPLAY_SET_COPYPROTECT = 0x200, ++ MMAL_DISPLAY_SET_ALPHA = 0x400, ++}; ++ ++/* rectangle, used lots so it gets its own struct */ ++struct vchiq_mmal_rect { ++ s32 x; ++ s32 y; ++ s32 width; ++ s32 height; ++}; ++ ++struct mmal_parameter_displayregion { ++ /** Bitfield that indicates which fields are set and should be ++ * used. All other fields will maintain their current value. ++ * \ref MMAL_DISPLAYSET_T defines the bits that can be ++ * combined. ++ */ ++ u32 set; ++ ++ /** Describes the display output device, with 0 typically ++ * being a directly connected LCD display. The actual values ++ * will depend on the hardware. Code using hard-wired numbers ++ * (e.g. 2) is certain to fail. ++ */ ++ ++ u32 display_num; ++ /** Indicates that we are using the full device screen area, ++ * rather than a window of the display. If zero, then ++ * dest_rect is used to specify a region of the display to ++ * use. ++ */ ++ ++ s32 fullscreen; ++ /** Indicates any rotation or flipping used to map frames onto ++ * the natural display orientation. ++ */ ++ u32 transform; /* enum mmal_parameter_displaytransform */ ++ ++ /** Where to display the frame within the screen, if ++ * fullscreen is zero. ++ */ ++ struct vchiq_mmal_rect dest_rect; ++ ++ /** Indicates which area of the frame to display. If all ++ * values are zero, the whole frame will be used. ++ */ ++ struct vchiq_mmal_rect src_rect; ++ ++ /** If set to non-zero, indicates that any display scaling ++ * should disregard the aspect ratio of the frame region being ++ * displayed. ++ */ ++ s32 noaspect; ++ ++ /** Indicates how the image should be scaled to fit the ++ * display. \code MMAL_DISPLAY_MODE_FILL \endcode indicates ++ * that the image should fill the screen by potentially ++ * cropping the frames. Setting \code mode \endcode to \code ++ * MMAL_DISPLAY_MODE_LETTERBOX \endcode indicates that all the ++ * source region should be displayed and black bars added if ++ * necessary. ++ */ ++ u32 mode; /* enum mmal_parameter_displaymode */ ++ ++ /** If non-zero, defines the width of a source pixel relative ++ * to \code pixel_y \endcode. If zero, then pixels default to ++ * being square. ++ */ ++ u32 pixel_x; ++ ++ /** If non-zero, defines the height of a source pixel relative ++ * to \code pixel_x \endcode. If zero, then pixels default to ++ * being square. ++ */ ++ u32 pixel_y; ++ ++ /** Sets the relative depth of the images, with greater values ++ * being in front of smaller values. ++ */ ++ u32 layer; ++ ++ /** Set to non-zero to ensure copy protection is used on ++ * output. ++ */ ++ s32 copyprotect_required; ++ ++ /** Level of opacity of the layer, where zero is fully ++ * transparent and 255 is fully opaque. ++ */ ++ u32 alpha; ++}; ++ ++#define MMAL_MAX_IMAGEFX_PARAMETERS 5 ++ ++struct mmal_parameter_imagefx_parameters { ++ enum mmal_parameter_imagefx effect; ++ u32 num_effect_params; ++ u32 effect_parameter[MMAL_MAX_IMAGEFX_PARAMETERS]; ++}; ++ ++#define MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS 4 ++#define MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES 2 ++#define MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN 16 ++ ++struct mmal_parameter_camera_info_camera_t { ++ u32 port_id; ++ u32 max_width; ++ u32 max_height; ++ u32 lens_present; ++ u8 camera_name[MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN]; ++}; ++ ++enum mmal_parameter_camera_info_flash_type_t { ++ /* Make values explicit to ensure they match values in config ini */ ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_XENON = 0, ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_LED = 1, ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_OTHER = 2, ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_MAX = 0x7FFFFFFF ++}; ++ ++struct mmal_parameter_camera_info_flash_t { ++ enum mmal_parameter_camera_info_flash_type_t flash_type; ++}; ++ ++struct mmal_parameter_camera_info_t { ++ u32 num_cameras; ++ u32 num_flashes; ++ struct mmal_parameter_camera_info_camera_t ++ cameras[MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS]; ++ struct mmal_parameter_camera_info_flash_t ++ flashes[MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES]; ++}; ++ ++#endif +--- /dev/null ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h +@@ -0,0 +1,166 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * Authors: Vincent Sanders @ Collabora ++ * Dave Stevenson @ Broadcom ++ * (now dave.stevenson@raspberrypi.org) ++ * Simon Mellor @ Broadcom ++ * Luke Diamand @ Broadcom ++ * ++ * MMAL interface to VCHIQ message passing ++ */ ++ ++#ifndef MMAL_VCHIQ_H ++#define MMAL_VCHIQ_H ++ ++#include "mmal-msg-format.h" ++ ++#define MAX_PORT_COUNT 4 ++ ++/* Maximum size of the format extradata. */ ++#define MMAL_FORMAT_EXTRADATA_MAX_SIZE 128 ++ ++struct vchiq_mmal_instance; ++ ++enum vchiq_mmal_es_type { ++ MMAL_ES_TYPE_UNKNOWN, /**< Unknown elementary stream type */ ++ MMAL_ES_TYPE_CONTROL, /**< Elementary stream of control commands */ ++ MMAL_ES_TYPE_AUDIO, /**< Audio elementary stream */ ++ MMAL_ES_TYPE_VIDEO, /**< Video elementary stream */ ++ MMAL_ES_TYPE_SUBPICTURE /**< Sub-picture elementary stream */ ++}; ++ ++struct vchiq_mmal_port_buffer { ++ unsigned int num; /* number of buffers */ ++ u32 size; /* size of buffers */ ++ u32 alignment; /* alignment of buffers */ ++}; ++ ++struct vchiq_mmal_port; ++ ++typedef void (*vchiq_mmal_buffer_cb)( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ int status, struct mmal_buffer *buffer, ++ unsigned long length, u32 mmal_flags, s64 dts, s64 pts); ++ ++struct vchiq_mmal_port { ++ bool enabled; ++ u32 handle; ++ u32 type; /* port type, cached to use on port info set */ ++ u32 index; /* port index, cached to use on port info set */ ++ ++ /* component port belongs to, allows simple deref */ ++ struct vchiq_mmal_component *component; ++ ++ struct vchiq_mmal_port *connected; /* port conencted to */ ++ ++ /* buffer info */ ++ struct vchiq_mmal_port_buffer minimum_buffer; ++ struct vchiq_mmal_port_buffer recommended_buffer; ++ struct vchiq_mmal_port_buffer current_buffer; ++ ++ /* stream format */ ++ struct mmal_es_format_local format; ++ /* elementary stream format */ ++ union mmal_es_specific_format es; ++ ++ /* data buffers to fill */ ++ struct list_head buffers; ++ /* lock to serialise adding and removing buffers from list */ ++ spinlock_t slock; ++ ++ /* Count of buffers the VPU has yet to return */ ++ atomic_t buffers_with_vpu; ++ /* callback on buffer completion */ ++ vchiq_mmal_buffer_cb buffer_cb; ++ /* callback context */ ++ void *cb_ctx; ++}; ++ ++struct vchiq_mmal_component { ++ bool enabled; ++ u32 handle; /* VideoCore handle for component */ ++ u32 inputs; /* Number of input ports */ ++ u32 outputs; /* Number of output ports */ ++ u32 clocks; /* Number of clock ports */ ++ struct vchiq_mmal_port control; /* control port */ ++ struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */ ++ struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */ ++ struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */ ++}; ++ ++int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance); ++int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance); ++ ++/* Initialise a mmal component and its ports ++ * ++ */ ++int vchiq_mmal_component_init( ++ struct vchiq_mmal_instance *instance, ++ const char *name, ++ struct vchiq_mmal_component **component_out); ++ ++int vchiq_mmal_component_finalise( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component); ++ ++int vchiq_mmal_component_enable( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component); ++ ++int vchiq_mmal_component_disable( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component); ++ ++/* enable a mmal port ++ * ++ * enables a port and if a buffer callback provided enque buffer ++ * headers as appropriate for the port. ++ */ ++int vchiq_mmal_port_enable( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ vchiq_mmal_buffer_cb buffer_cb); ++ ++/* disable a port ++ * ++ * disable a port will dequeue any pending buffers ++ */ ++int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port); ++ ++int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, ++ void *value, ++ u32 value_size); ++ ++int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, ++ void *value, ++ u32 *value_size); ++ ++int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port); ++ ++int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *src, ++ struct vchiq_mmal_port *dst); ++ ++int vchiq_mmal_version(struct vchiq_mmal_instance *instance, ++ u32 *major_out, ++ u32 *minor_out); ++ ++int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ struct mmal_buffer *buf); ++ ++int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, ++ struct mmal_buffer *buf); ++int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf); ++#endif /* MMAL_VCHIQ_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0244-staging-bcm2835-camera-Fix-comment-style-violations.patch b/target/linux/brcm2708/patches-4.19/950-0244-staging-bcm2835-camera-Fix-comment-style-violations.patch deleted file mode 100644 index 023871ca64..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0244-staging-bcm2835-camera-Fix-comment-style-violations.patch +++ /dev/null @@ -1,617 +0,0 @@ -From 4fb0df1b29feafacc244ca512b152dd3b96c224c Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 21 Feb 2018 13:49:32 +0000 -Subject: [PATCH 244/806] staging: bcm2835-camera: Fix comment style - violations. - -Fix comment style violations in the header files. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/mmal-msg-format.h | 95 ++++++------ - .../bcm2835-camera/mmal-msg-port.h | 124 ++++++++-------- - .../vc04_services/bcm2835-camera/mmal-msg.h | 135 +++++++++--------- - 3 files changed, 185 insertions(+), 169 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h -@@ -19,22 +19,23 @@ - /* MMAL_ES_FORMAT_T */ - - struct mmal_audio_format { -- u32 channels; /**< Number of audio channels */ -- u32 sample_rate; /**< Sample rate */ -+ u32 channels; /* Number of audio channels */ -+ u32 sample_rate; /* Sample rate */ - -- u32 bits_per_sample; /**< Bits per sample */ -- u32 block_align; /**< Size of a block of data */ -+ u32 bits_per_sample; /* Bits per sample */ -+ u32 block_align; /* Size of a block of data */ - }; - - struct mmal_video_format { -- u32 width; /**< Width of frame in pixels */ -- u32 height; /**< Height of frame in rows of pixels */ -- struct mmal_rect crop; /**< Visible region of the frame */ -- struct mmal_rational frame_rate; /**< Frame rate */ -- struct mmal_rational par; /**< Pixel aspect ratio */ -- -- /* FourCC specifying the color space of the video stream. See the -- * \ref MmalColorSpace "pre-defined color spaces" for some examples. -+ u32 width; /* Width of frame in pixels */ -+ u32 height; /* Height of frame in rows of pixels */ -+ struct mmal_rect crop; /* Visible region of the frame */ -+ struct mmal_rational frame_rate; /* Frame rate */ -+ struct mmal_rational par; /* Pixel aspect ratio */ -+ -+ /* -+ * FourCC specifying the color space of the video stream. See the -+ * MmalColorSpace "pre-defined color spaces" for some examples. - */ - u32 color_space; - }; -@@ -50,48 +51,56 @@ union mmal_es_specific_format { - struct mmal_subpicture_format subpicture; - }; - --/** Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ -+/* Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ - struct mmal_es_format_local { -- u32 type; /* enum mmal_es_type */ -- -- u32 encoding; /* FourCC specifying encoding of the elementary stream.*/ -- u32 encoding_variant; /* FourCC specifying the specific -- * encoding variant of the elementary -- * stream. -- */ -- -- union mmal_es_specific_format *es; /* Type specific -- * information for the -- * elementary stream -- */ -+ u32 type; /* enum mmal_es_type */ - -- u32 bitrate; /**< Bitrate in bits per second */ -- u32 flags; /**< Flags describing properties of the elementary stream. */ -+ u32 encoding; /* FourCC specifying encoding of the elementary -+ * stream. -+ */ -+ u32 encoding_variant; /* FourCC specifying the specific -+ * encoding variant of the elementary -+ * stream. -+ */ -+ -+ union mmal_es_specific_format *es; /* Type specific -+ * information for the -+ * elementary stream -+ */ -+ -+ u32 bitrate; /* Bitrate in bits per second */ -+ u32 flags; /* Flags describing properties of the elementary -+ * stream. -+ */ - -- u32 extradata_size; /**< Size of the codec specific data */ -- u8 *extradata; /**< Codec specific data */ -+ u32 extradata_size; /* Size of the codec specific data */ -+ u8 *extradata; /* Codec specific data */ - }; - --/** Remote definition of an elementary stream format (MMAL_ES_FORMAT_T) */ -+/* Remote definition of an elementary stream format (MMAL_ES_FORMAT_T) */ - struct mmal_es_format { -- u32 type; /* enum mmal_es_type */ -+ u32 type; /* enum mmal_es_type */ - -- u32 encoding; /* FourCC specifying encoding of the elementary stream.*/ -- u32 encoding_variant; /* FourCC specifying the specific -- * encoding variant of the elementary -- * stream. -- */ -+ u32 encoding; /* FourCC specifying encoding of the elementary -+ * stream. -+ */ -+ u32 encoding_variant; /* FourCC specifying the specific -+ * encoding variant of the elementary -+ * stream. -+ */ - -- u32 es; /* Type specific -+ u32 es; /* Type specific - * information for the - * elementary stream - */ - -- u32 bitrate; /**< Bitrate in bits per second */ -- u32 flags; /**< Flags describing properties of the elementary stream. */ -+ u32 bitrate; /* Bitrate in bits per second */ -+ u32 flags; /* Flags describing properties of the elementary -+ * stream. -+ */ - -- u32 extradata_size; /**< Size of the codec specific data */ -- u32 extradata; /**< Codec specific data */ -+ u32 extradata_size; /* Size of the codec specific data */ -+ u32 extradata; /* Codec specific data */ - }; - - #endif /* MMAL_MSG_FORMAT_H */ ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h -@@ -13,28 +13,31 @@ - - /* MMAL_PORT_TYPE_T */ - enum mmal_port_type { -- MMAL_PORT_TYPE_UNKNOWN = 0, /**< Unknown port type */ -- MMAL_PORT_TYPE_CONTROL, /**< Control port */ -- MMAL_PORT_TYPE_INPUT, /**< Input port */ -- MMAL_PORT_TYPE_OUTPUT, /**< Output port */ -- MMAL_PORT_TYPE_CLOCK, /**< Clock port */ -+ MMAL_PORT_TYPE_UNKNOWN = 0, /* Unknown port type */ -+ MMAL_PORT_TYPE_CONTROL, /* Control port */ -+ MMAL_PORT_TYPE_INPUT, /* Input port */ -+ MMAL_PORT_TYPE_OUTPUT, /* Output port */ -+ MMAL_PORT_TYPE_CLOCK, /* Clock port */ - }; - --/** The port is pass-through and doesn't need buffer headers allocated */ -+/* The port is pass-through and doesn't need buffer headers allocated */ - #define MMAL_PORT_CAPABILITY_PASSTHROUGH 0x01 --/** The port wants to allocate the buffer payloads. -+/* -+ *The port wants to allocate the buffer payloads. - * This signals a preference that payload allocation should be done - * on this port for efficiency reasons. - */ - #define MMAL_PORT_CAPABILITY_ALLOCATION 0x02 --/** The port supports format change events. -+/* -+ * The port supports format change events. - * This applies to input ports and is used to let the client know - * whether the port supports being reconfigured via a format - * change event (i.e. without having to disable the port). - */ - #define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE 0x04 - --/* mmal port structure (MMAL_PORT_T) -+/* -+ * mmal port structure (MMAL_PORT_T) - * - * most elements are informational only, the pointer values for - * interogation messages are generally provided as additional -@@ -42,50 +45,50 @@ enum mmal_port_type { - * buffer_num, buffer_size and userdata parameters are writable. - */ - struct mmal_port { -- u32 priv; /* Private member used by the framework */ -- u32 name; /* Port name. Used for debugging purposes (RO) */ -+ u32 priv; /* Private member used by the framework */ -+ u32 name; /* Port name. Used for debugging purposes (RO) */ - -- u32 type; /* Type of the port (RO) enum mmal_port_type */ -- u16 index; /* Index of the port in its type list (RO) */ -- u16 index_all; /* Index of the port in the list of all ports (RO) */ -- -- u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ -- u32 format; /* Format of the elementary stream */ -- -- u32 buffer_num_min; /* Minimum number of buffers the port -- * requires (RO). This is set by the -- * component. -- */ -- -- u32 buffer_size_min; /* Minimum size of buffers the port -- * requires (RO). This is set by the -- * component. -- */ -- -- u32 buffer_alignment_min; /* Minimum alignment requirement for -- * the buffers (RO). A value of -- * zero means no special alignment -- * requirements. This is set by the -- * component. -- */ -- -- u32 buffer_num_recommended; /* Number of buffers the port -- * recommends for optimal -- * performance (RO). A value of -- * zero means no special -- * recommendation. This is set -- * by the component. -- */ -- -- u32 buffer_size_recommended; /* Size of buffers the port -- * recommends for optimal -- * performance (RO). A value of -- * zero means no special -- * recommendation. This is set -- * by the component. -- */ -+ u32 type; /* Type of the port (RO) enum mmal_port_type */ -+ u16 index; /* Index of the port in its type list (RO) */ -+ u16 index_all; /* Index of the port in the list of all ports (RO) */ -+ -+ u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ -+ u32 format; /* Format of the elementary stream */ -+ -+ u32 buffer_num_min; /* Minimum number of buffers the port -+ * requires (RO). This is set by the -+ * component. -+ */ -+ -+ u32 buffer_size_min; /* Minimum size of buffers the port -+ * requires (RO). This is set by the -+ * component. -+ */ -+ -+ u32 buffer_alignment_min;/* Minimum alignment requirement for -+ * the buffers (RO). A value of -+ * zero means no special alignment -+ * requirements. This is set by the -+ * component. -+ */ -+ -+ u32 buffer_num_recommended; /* Number of buffers the port -+ * recommends for optimal -+ * performance (RO). A value of -+ * zero means no special -+ * recommendation. This is set -+ * by the component. -+ */ -+ -+ u32 buffer_size_recommended; /* Size of buffers the port -+ * recommends for optimal -+ * performance (RO). A value of -+ * zero means no special -+ * recommendation. This is set -+ * by the component. -+ */ - -- u32 buffer_num; /* Actual number of buffers the port will use. -+ u32 buffer_num; /* Actual number of buffers the port will use. - * This is set by the client. - */ - -@@ -94,14 +97,13 @@ struct mmal_port { - * the client. - */ - -- u32 component; /* Component this port belongs to (Read Only) */ -+ u32 component; /* Component this port belongs to (Read Only) */ - -- u32 userdata; /* Field reserved for use by the client */ -- -- u32 capabilities; /* Flags describing the capabilities of a -- * port (RO). Bitwise combination of \ref -- * portcapabilities "Port capabilities" -- * values. -- */ -+ u32 userdata; /* Field reserved for use by the client */ - -+ u32 capabilities; /* Flags describing the capabilities of a -+ * port (RO). Bitwise combination of \ref -+ * portcapabilities "Port capabilities" -+ * values. -+ */ - }; ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h -@@ -11,7 +11,8 @@ - * Luke Diamand @ Broadcom - */ - --/* all the data structures which serialise the MMAL protocol. note -+/* -+ * all the data structures which serialise the MMAL protocol. note - * these are directly mapped onto the recived message data. - * - * BEWARE: They seem to *assume* pointers are u32 and that there is no -@@ -41,51 +42,51 @@ enum mmal_msg_type { - MMAL_MSG_TYPE_SERVICE_CLOSED, - MMAL_MSG_TYPE_GET_VERSION, - MMAL_MSG_TYPE_COMPONENT_CREATE, -- MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ -+ MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ - MMAL_MSG_TYPE_COMPONENT_ENABLE, - MMAL_MSG_TYPE_COMPONENT_DISABLE, - MMAL_MSG_TYPE_PORT_INFO_GET, - MMAL_MSG_TYPE_PORT_INFO_SET, -- MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ -+ MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ - MMAL_MSG_TYPE_BUFFER_FROM_HOST, - MMAL_MSG_TYPE_BUFFER_TO_HOST, - MMAL_MSG_TYPE_GET_STATS, - MMAL_MSG_TYPE_PORT_PARAMETER_SET, -- MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ -+ MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ - MMAL_MSG_TYPE_EVENT_TO_HOST, - MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT, - MMAL_MSG_TYPE_OPAQUE_ALLOCATOR, - MMAL_MSG_TYPE_CONSUME_MEM, -- MMAL_MSG_TYPE_LMK, /* 20 */ -+ MMAL_MSG_TYPE_LMK, /* 20 */ - MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC, - MMAL_MSG_TYPE_DRM_GET_LHS32, - MMAL_MSG_TYPE_DRM_GET_TIME, - MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN, -- MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ -+ MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ - MMAL_MSG_TYPE_HOST_LOG, - MMAL_MSG_TYPE_MSG_LAST - }; - - /* port action request messages differ depending on the action type */ - enum mmal_msg_port_action_type { -- MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unknown action */ -- MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ -- MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ -- MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ -- MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ -- MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ -+ MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unknown action */ -+ MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ -+ MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ -+ MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ -+ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ -+ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ - MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/ - }; - - struct mmal_msg_header { - u32 magic; -- u32 type; /** enum mmal_msg_type */ -+ u32 type; /* enum mmal_msg_type */ - - /* Opaque handle to the control service */ - u32 control_service; - -- u32 context; /** a u32 per message context */ -- u32 status; /** The status of the vchiq operation */ -+ u32 context; /* a u32 per message context */ -+ u32 status; /* The status of the vchiq operation */ - u32 padding; - }; - -@@ -99,9 +100,9 @@ struct mmal_msg_version { - - /* request to VC to create component */ - struct mmal_msg_component_create { -- u32 client_component; /* component context */ -+ u32 client_component; /* component context */ - char name[128]; -- u32 pid; /* For debug */ -+ u32 pid; /* For debug */ - }; - - /* reply from VC to component creation request */ -@@ -121,7 +122,7 @@ struct mmal_msg_component_destroy { - }; - - struct mmal_msg_component_destroy_reply { -- u32 status; /** The component destruction status */ -+ u32 status; /* The component destruction status */ - }; - - /* request and reply to VC to enable a component */ -@@ -130,7 +131,7 @@ struct mmal_msg_component_enable { - }; - - struct mmal_msg_component_enable_reply { -- u32 status; /** The component enable status */ -+ u32 status; /* The component enable status */ - }; - - /* request and reply to VC to disable a component */ -@@ -139,7 +140,7 @@ struct mmal_msg_component_disable { - }; - - struct mmal_msg_component_disable_reply { -- u32 status; /** The component disable status */ -+ u32 status; /* The component disable status */ - }; - - /* request to VC to get port information */ -@@ -151,12 +152,12 @@ struct mmal_msg_port_info_get { - - /* reply from VC to get port info request */ - struct mmal_msg_port_info_get_reply { -- u32 status; /** enum mmal_msg_status */ -- u32 component_handle; /* component handle port is associated with */ -- u32 port_type; /* enum mmal_msg_port_type */ -- u32 port_index; /* port indexed in query */ -- s32 found; /* unused */ -- u32 port_handle; /**< Handle to use for this port */ -+ u32 status; /* enum mmal_msg_status */ -+ u32 component_handle; /* component handle port is associated with */ -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 port_index; /* port indexed in query */ -+ s32 found; /* unused */ -+ u32 port_handle; /* Handle to use for this port */ - struct mmal_port port; - struct mmal_es_format format; /* elementary stream format */ - union mmal_es_specific_format es; /* es type specific data */ -@@ -166,8 +167,8 @@ struct mmal_msg_port_info_get_reply { - /* request to VC to set port information */ - struct mmal_msg_port_info_set { - u32 component_handle; -- u32 port_type; /* enum mmal_msg_port_type */ -- u32 port_index; /* port indexed in query */ -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 port_index; /* port indexed in query */ - struct mmal_port port; - struct mmal_es_format format; - union mmal_es_specific_format es; -@@ -177,11 +178,11 @@ struct mmal_msg_port_info_set { - /* reply from VC to port info set request */ - struct mmal_msg_port_info_set_reply { - u32 status; -- u32 component_handle; /* component handle port is associated with */ -- u32 port_type; /* enum mmal_msg_port_type */ -- u32 index; /* port indexed in query */ -- s32 found; /* unused */ -- u32 port_handle; /**< Handle to use for this port */ -+ u32 component_handle; /* component handle port is associated with */ -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 index; /* port indexed in query */ -+ s32 found; /* unused */ -+ u32 port_handle; /* Handle to use for this port */ - struct mmal_port port; - struct mmal_es_format format; - union mmal_es_specific_format es; -@@ -192,7 +193,7 @@ struct mmal_msg_port_info_set_reply { - struct mmal_msg_port_action_port { - u32 component_handle; - u32 port_handle; -- u32 action; /* enum mmal_msg_port_action_type */ -+ u32 action; /* enum mmal_msg_port_action_type */ - struct mmal_port port; - }; - -@@ -200,50 +201,53 @@ struct mmal_msg_port_action_port { - struct mmal_msg_port_action_handle { - u32 component_handle; - u32 port_handle; -- u32 action; /* enum mmal_msg_port_action_type */ -+ u32 action; /* enum mmal_msg_port_action_type */ - u32 connect_component_handle; - u32 connect_port_handle; - }; - - struct mmal_msg_port_action_reply { -- u32 status; /** The port action operation status */ -+ u32 status; /* The port action operation status */ - }; - - /* MMAL buffer transfer */ - --/** Size of space reserved in a buffer message for short messages. */ -+/* Size of space reserved in a buffer message for short messages. */ - #define MMAL_VC_SHORT_DATA 128 - --/** Signals that the current payload is the end of the stream of data */ -+/* Signals that the current payload is the end of the stream of data */ - #define MMAL_BUFFER_HEADER_FLAG_EOS BIT(0) --/** Signals that the start of the current payload starts a frame */ -+/* Signals that the start of the current payload starts a frame */ - #define MMAL_BUFFER_HEADER_FLAG_FRAME_START BIT(1) --/** Signals that the end of the current payload ends a frame */ -+/* Signals that the end of the current payload ends a frame */ - #define MMAL_BUFFER_HEADER_FLAG_FRAME_END BIT(2) --/** Signals that the current payload contains only complete frames (>1) */ -+/* Signals that the current payload contains only complete frames (>1) */ - #define MMAL_BUFFER_HEADER_FLAG_FRAME \ - (MMAL_BUFFER_HEADER_FLAG_FRAME_START|MMAL_BUFFER_HEADER_FLAG_FRAME_END) --/** Signals that the current payload is a keyframe (i.e. self decodable) */ -+/* Signals that the current payload is a keyframe (i.e. self decodable) */ - #define MMAL_BUFFER_HEADER_FLAG_KEYFRAME BIT(3) --/** Signals a discontinuity in the stream of data (e.g. after a seek). -+/* -+ * Signals a discontinuity in the stream of data (e.g. after a seek). - * Can be used for instance by a decoder to reset its state - */ - #define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY BIT(4) --/** Signals a buffer containing some kind of config data for the component -+/* -+ * Signals a buffer containing some kind of config data for the component - * (e.g. codec config data) - */ - #define MMAL_BUFFER_HEADER_FLAG_CONFIG BIT(5) --/** Signals an encrypted payload */ -+/* Signals an encrypted payload */ - #define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED BIT(6) --/** Signals a buffer containing side information */ -+/* Signals a buffer containing side information */ - #define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO BIT(7) --/** Signals a buffer which is the snapshot/postview image from a stills -+/* -+ * Signals a buffer which is the snapshot/postview image from a stills - * capture - */ - #define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT BIT(8) --/** Signals a buffer which contains data known to be corrupted */ -+/* Signals a buffer which contains data known to be corrupted */ - #define MMAL_BUFFER_HEADER_FLAG_CORRUPTED BIT(9) --/** Signals that a buffer failed to be transmitted */ -+/* Signals that a buffer failed to be transmitted */ - #define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED BIT(10) - - struct mmal_driver_buffer { -@@ -255,8 +259,8 @@ struct mmal_driver_buffer { - - /* buffer header */ - struct mmal_buffer_header { -- u32 next; /* next header */ -- u32 priv; /* framework private data */ -+ u32 next; /* next header */ -+ u32 priv; /* framework private data */ - u32 cmd; - u32 data; - u32 alloc_size; -@@ -281,7 +285,8 @@ struct mmal_buffer_header_type_specific - }; - - struct mmal_msg_buffer_from_host { -- /* The front 32 bytes of the buffer header are copied -+ /* -+ *The front 32 bytes of the buffer header are copied - * back to us in the reply to allow for context. This - * area is used to store two mmal_driver_buffer structures to - * allow for multiple concurrent service users. -@@ -296,7 +301,7 @@ struct mmal_msg_buffer_from_host { - s32 is_zero_copy; - s32 has_reference; - -- /** allows short data to be xfered in control message */ -+ /* allows short data to be xfered in control message */ - u32 payload_in_message; - u8 short_data[MMAL_VC_SHORT_DATA]; - }; -@@ -306,10 +311,10 @@ struct mmal_msg_buffer_from_host { - #define MMAL_WORKER_PORT_PARAMETER_SPACE 96 - - struct mmal_msg_port_parameter_set { -- u32 component_handle; /* component */ -- u32 port_handle; /* port */ -- u32 id; /* Parameter ID */ -- u32 size; /* Parameter size */ -+ u32 component_handle; /* component */ -+ u32 port_handle; /* port */ -+ u32 id; /* Parameter ID */ -+ u32 size; /* Parameter size */ - uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; - }; - -@@ -322,16 +327,16 @@ struct mmal_msg_port_parameter_set_reply - /* port parameter getting */ - - struct mmal_msg_port_parameter_get { -- u32 component_handle; /* component */ -- u32 port_handle; /* port */ -- u32 id; /* Parameter ID */ -- u32 size; /* Parameter size */ -+ u32 component_handle; /* component */ -+ u32 port_handle; /* port */ -+ u32 id; /* Parameter ID */ -+ u32 size; /* Parameter size */ - }; - - struct mmal_msg_port_parameter_get_reply { -- u32 status; /* Status of mmal_port_parameter_get call */ -- u32 id; /* Parameter ID */ -- u32 size; /* Parameter size */ -+ u32 status; /* Status of mmal_port_parameter_get call */ -+ u32 id; /* Parameter ID */ -+ u32 size; /* Parameter size */ - uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; - }; - -@@ -339,7 +344,7 @@ struct mmal_msg_port_parameter_get_reply - #define MMAL_WORKER_EVENT_SPACE 256 - - struct mmal_msg_event_to_host { -- u32 client_component; /* component context */ -+ u32 client_component; /* component context */ - - u32 port_type; - u32 port_num; diff --git a/target/linux/brcm2708/patches-4.19/950-0244-staging-mmal-vchiq-Allocate-and-free-components-as-r.patch b/target/linux/brcm2708/patches-4.19/950-0244-staging-mmal-vchiq-Allocate-and-free-components-as-r.patch new file mode 100644 index 0000000000..7e4100f96a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0244-staging-mmal-vchiq-Allocate-and-free-components-as-r.patch @@ -0,0 +1,107 @@ +From f94642597f63c71b2ccffddd4f447190c131af56 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 24 Sep 2018 16:51:13 +0100 +Subject: [PATCH] staging: mmal-vchiq: Allocate and free components as + required + +The existing code assumed that there would only ever be 4 components, +and never freed the entries once used. +Allow arbitrary creation and destruction of components. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/vchiq-mmal/mmal-vchiq.c | 29 ++++++++++++------- + .../vc04_services/vchiq-mmal/mmal-vchiq.h | 1 + + 2 files changed, 20 insertions(+), 10 deletions(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -38,8 +38,11 @@ MODULE_AUTHOR("Dave Stevenson, vchiq_mutex)) + return -EINTR; + +- if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) { ++ for (idx = 0; idx < VCHIQ_MMAL_MAX_COMPONENTS; idx++) { ++ if (!instance->component[idx].in_use) { ++ component = &instance->component[idx]; ++ component->in_use = 1; ++ break; ++ } ++ } ++ ++ if (!component) { + ret = -EINVAL; /* todo is this correct error? */ + goto unlock; + } + +- component = &instance->component[instance->component_idx]; +- + ret = create_component(instance, component, name); + if (ret < 0) { + pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", +@@ -1694,8 +1701,6 @@ int vchiq_mmal_component_init(struct vch + goto release_component; + } + +- instance->component_idx++; +- + *component_out = component; + + mutex_unlock(&instance->vchiq_mutex); +@@ -1705,6 +1710,8 @@ int vchiq_mmal_component_init(struct vch + release_component: + destroy_component(instance, component); + unlock: ++ if (component) ++ component->in_use = 0; + mutex_unlock(&instance->vchiq_mutex); + + return ret; +@@ -1727,6 +1734,8 @@ int vchiq_mmal_component_finalise(struct + + ret = destroy_component(instance, component); + ++ component->in_use = 0; ++ + mutex_unlock(&instance->vchiq_mutex); + + return ret; +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h +@@ -82,6 +82,7 @@ struct vchiq_mmal_port { + }; + + struct vchiq_mmal_component { ++ u32 in_use:1; + bool enabled; + u32 handle; /* VideoCore handle for component */ + u32 inputs; /* Number of input ports */ diff --git a/target/linux/brcm2708/patches-4.19/950-0245-staging-bcm2835-camera-Fix-spacing-around-operators.patch b/target/linux/brcm2708/patches-4.19/950-0245-staging-bcm2835-camera-Fix-spacing-around-operators.patch deleted file mode 100644 index 0fb8fc34fb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0245-staging-bcm2835-camera-Fix-spacing-around-operators.patch +++ /dev/null @@ -1,102 +0,0 @@ -From 54fde7601287891754bef85efbbc9b5648d043f4 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 21 Feb 2018 14:13:03 +0000 -Subject: [PATCH 245/806] staging: bcm2835-camera: Fix spacing around operators - -Fix checkpatch warnings over spaces around operators. -Many were around operations that can be replaced with the -BIT(x) macro, so replace with that where appropriate. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-camera/controls.c | 32 +++++++++---------- - .../vc04_services/bcm2835-camera/mmal-msg.h | 3 +- - .../bcm2835-camera/mmal-parameters.h | 12 +++---- - 3 files changed, 24 insertions(+), 23 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -1123,10 +1123,10 @@ static const struct bm2835_mmal_v4l2_ctr - { - V4L2_CID_MPEG_VIDEO_H264_PROFILE, - MMAL_CONTROL_TYPE_STD_MENU, -- ~((1<1) */ - #define MMAL_BUFFER_HEADER_FLAG_FRAME \ -- (MMAL_BUFFER_HEADER_FLAG_FRAME_START|MMAL_BUFFER_HEADER_FLAG_FRAME_END) -+ (MMAL_BUFFER_HEADER_FLAG_FRAME_START | \ -+ MMAL_BUFFER_HEADER_FLAG_FRAME_END) - /* Signals that the current payload is a keyframe (i.e. self decodable) */ - #define MMAL_BUFFER_HEADER_FLAG_KEYFRAME BIT(3) - /* ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h -@@ -23,17 +23,17 @@ - #define __MMAL_PARAMETERS_H - - /** Common parameter ID group, used with many types of component. */ --#define MMAL_PARAMETER_GROUP_COMMON (0<<16) -+#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) - /** Camera-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_CAMERA (1<<16) -+#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) - /** Video-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_VIDEO (2<<16) -+#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) - /** Audio-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_AUDIO (3<<16) -+#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) - /** Clock-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_CLOCK (4<<16) -+#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) - /** Miracast-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_MIRACAST (5<<16) -+#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) - - /* Common parameters */ - enum mmal_parameter_common_type { diff --git a/target/linux/brcm2708/patches-4.19/950-0245-staging-mmal-vchiq-Avoid-use-of-bool-in-structures.patch b/target/linux/brcm2708/patches-4.19/950-0245-staging-mmal-vchiq-Avoid-use-of-bool-in-structures.patch new file mode 100644 index 0000000000..401b8bfa09 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0245-staging-mmal-vchiq-Avoid-use-of-bool-in-structures.patch @@ -0,0 +1,93 @@ +From 3789c3b08b56f471878c493fd80a2eee776b527c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 29 Oct 2018 16:20:46 +0000 +Subject: [PATCH] staging: mmal-vchiq: Avoid use of bool in structures + +Fixes up a checkpatch error "Avoid using bool structure members +because of possible alignment issues". + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 14 +++++++------- + .../staging/vc04_services/vchiq-mmal/mmal-vchiq.h | 4 ++-- + 2 files changed, 9 insertions(+), 9 deletions(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -861,9 +861,9 @@ static int port_info_get(struct vchiq_mm + goto release_msg; + + if (rmsg->u.port_info_get_reply.port.is_enabled == 0) +- port->enabled = false; ++ port->enabled = 0; + else +- port->enabled = true; ++ port->enabled = 1; + + /* copy the values out of the message */ + port->handle = rmsg->u.port_info_get_reply.port_handle; +@@ -1300,7 +1300,7 @@ static int port_disable(struct vchiq_mma + if (!port->enabled) + return 0; + +- port->enabled = false; ++ port->enabled = 0; + + ret = port_action_port(instance, port, + MMAL_MSG_PORT_ACTION_TYPE_DISABLE); +@@ -1352,7 +1352,7 @@ static int port_enable(struct vchiq_mmal + if (ret) + goto done; + +- port->enabled = true; ++ port->enabled = 1; + + if (port->buffer_cb) { + /* send buffer headers to videocore */ +@@ -1524,7 +1524,7 @@ int vchiq_mmal_port_connect_tunnel(struc + pr_err("failed disconnecting src port\n"); + goto release_unlock; + } +- src->connected->enabled = false; ++ src->connected->enabled = 0; + src->connected = NULL; + } + +@@ -1760,7 +1760,7 @@ int vchiq_mmal_component_enable(struct v + + ret = enable_component(instance, component); + if (ret == 0) +- component->enabled = true; ++ component->enabled = 1; + + mutex_unlock(&instance->vchiq_mutex); + +@@ -1786,7 +1786,7 @@ int vchiq_mmal_component_disable(struct + + ret = disable_component(instance, component); + if (ret == 0) +- component->enabled = false; ++ component->enabled = 0; + + mutex_unlock(&instance->vchiq_mutex); + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h +@@ -48,7 +48,7 @@ typedef void (*vchiq_mmal_buffer_cb)( + unsigned long length, u32 mmal_flags, s64 dts, s64 pts); + + struct vchiq_mmal_port { +- bool enabled; ++ u32 enabled:1; + u32 handle; + u32 type; /* port type, cached to use on port info set */ + u32 index; /* port index, cached to use on port info set */ +@@ -83,7 +83,7 @@ struct vchiq_mmal_port { + + struct vchiq_mmal_component { + u32 in_use:1; +- bool enabled; ++ u32 enabled:1; + u32 handle; /* VideoCore handle for component */ + u32 inputs; /* Number of input ports */ + u32 outputs; /* Number of output ports */ diff --git a/target/linux/brcm2708/patches-4.19/950-0246-staging-bcm2835-camera-Reduce-length-of-enum-names.patch b/target/linux/brcm2708/patches-4.19/950-0246-staging-bcm2835-camera-Reduce-length-of-enum-names.patch deleted file mode 100644 index f6fa4ae3d6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0246-staging-bcm2835-camera-Reduce-length-of-enum-names.patch +++ /dev/null @@ -1,774 +0,0 @@ -From 75aca02c1449e3a97ec32de9974ad410f5d34463 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 21 Feb 2018 15:23:35 +0000 -Subject: [PATCH 246/806] staging: bcm2835-camera: Reduce length of enum names - -We have numerous lines over 80 chars, or oddly split. Many -of these are due to using long enum names such as -MMAL_COMPONENT_CAMERA. -Reduce the length of these enum names. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/bcm2835-camera.c | 165 +++++++++--------- - .../bcm2835-camera/bcm2835-camera.h | 20 +-- - .../vc04_services/bcm2835-camera/controls.c | 47 +++-- - 3 files changed, 114 insertions(+), 118 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -80,7 +80,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_I420, - .depth = 12, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 1, - .remove_padding = 1, - }, { -@@ -89,7 +89,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_YUYV, - .depth = 16, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 2, - .remove_padding = 0, - }, { -@@ -98,7 +98,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_RGB24, - .depth = 24, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 3, - .remove_padding = 0, - }, { -@@ -107,7 +107,7 @@ static struct mmal_fmt formats[] = { - .flags = V4L2_FMT_FLAG_COMPRESSED, - .mmal = MMAL_ENCODING_JPEG, - .depth = 8, -- .mmal_component = MMAL_COMPONENT_IMAGE_ENCODE, -+ .mmal_component = COMP_IMAGE_ENCODE, - .ybbp = 0, - .remove_padding = 0, - }, { -@@ -116,7 +116,7 @@ static struct mmal_fmt formats[] = { - .flags = V4L2_FMT_FLAG_COMPRESSED, - .mmal = MMAL_ENCODING_H264, - .depth = 8, -- .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, -+ .mmal_component = COMP_VIDEO_ENCODE, - .ybbp = 0, - .remove_padding = 0, - }, { -@@ -125,7 +125,7 @@ static struct mmal_fmt formats[] = { - .flags = V4L2_FMT_FLAG_COMPRESSED, - .mmal = MMAL_ENCODING_MJPEG, - .depth = 8, -- .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, -+ .mmal_component = COMP_VIDEO_ENCODE, - .ybbp = 0, - .remove_padding = 0, - }, { -@@ -134,7 +134,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_YVYU, - .depth = 16, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 2, - .remove_padding = 0, - }, { -@@ -143,7 +143,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_VYUY, - .depth = 16, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 2, - .remove_padding = 0, - }, { -@@ -152,7 +152,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_UYVY, - .depth = 16, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 2, - .remove_padding = 0, - }, { -@@ -161,7 +161,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_NV12, - .depth = 12, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 1, - .remove_padding = 1, - }, { -@@ -170,7 +170,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_BGR24, - .depth = 24, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 3, - .remove_padding = 0, - }, { -@@ -179,7 +179,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_YV12, - .depth = 12, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 1, - .remove_padding = 1, - }, { -@@ -188,7 +188,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_NV21, - .depth = 12, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 1, - .remove_padding = 1, - }, { -@@ -197,7 +197,7 @@ static struct mmal_fmt formats[] = { - .flags = 0, - .mmal = MMAL_ENCODING_BGRA, - .depth = 32, -- .mmal_component = MMAL_COMPONENT_CAMERA, -+ .mmal_component = COMP_CAMERA, - .ybbp = 4, - .remove_padding = 0, - }, -@@ -314,7 +314,7 @@ static inline bool is_capturing(struct b - { - return dev->capture.camera_port == - &dev-> -- component[MMAL_COMPONENT_CAMERA]->output[MMAL_CAMERA_PORT_CAPTURE]; -+ component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; - } - - static void buffer_cb(struct vchiq_mmal_instance *instance, -@@ -439,7 +439,7 @@ static int enable_camera(struct bm2835_m - if (!dev->camera_use_count) { - ret = vchiq_mmal_port_parameter_set( - dev->instance, -- &dev->component[MMAL_COMPONENT_CAMERA]->control, -+ &dev->component[COMP_CAMERA]->control, - MMAL_PARAMETER_CAMERA_NUM, &dev->camera_num, - sizeof(dev->camera_num)); - if (ret < 0) { -@@ -450,7 +450,7 @@ static int enable_camera(struct bm2835_m - - ret = vchiq_mmal_component_enable( - dev->instance, -- dev->component[MMAL_COMPONENT_CAMERA]); -+ dev->component[COMP_CAMERA]); - if (ret < 0) { - v4l2_err(&dev->v4l2_dev, - "Failed enabling camera, ret %d\n", ret); -@@ -482,7 +482,7 @@ static int disable_camera(struct bm2835_ - ret = - vchiq_mmal_component_disable( - dev->instance, -- dev->component[MMAL_COMPONENT_CAMERA]); -+ dev->component[COMP_CAMERA]); - if (ret < 0) { - v4l2_err(&dev->v4l2_dev, - "Failed disabling camera, ret %d\n", ret); -@@ -490,7 +490,7 @@ static int disable_camera(struct bm2835_ - } - vchiq_mmal_port_parameter_set( - dev->instance, -- &dev->component[MMAL_COMPONENT_CAMERA]->control, -+ &dev->component[COMP_CAMERA]->control, - MMAL_PARAMETER_CAMERA_NUM, &i, - sizeof(i)); - } -@@ -542,7 +542,7 @@ static int start_streaming(struct vb2_qu - /* if the preview is not already running, wait for a few frames for AGC - * to settle down. - */ -- if (!dev->component[MMAL_COMPONENT_PREVIEW]->enabled) -+ if (!dev->component[COMP_PREVIEW]->enabled) - msleep(300); - - /* enable the connection from camera to encoder (if applicable) */ -@@ -775,9 +775,9 @@ static int vidioc_s_fmt_vid_overlay(stru - vidioc_try_fmt_vid_overlay(file, priv, f); - - dev->overlay = f->fmt.win; -- if (dev->component[MMAL_COMPONENT_PREVIEW]->enabled) { -+ if (dev->component[COMP_PREVIEW]->enabled) { - set_overlay_params(dev, -- &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); -+ &dev->component[COMP_PREVIEW]->input[0]); - } - - return 0; -@@ -790,13 +790,13 @@ static int vidioc_overlay(struct file *f - struct vchiq_mmal_port *src; - struct vchiq_mmal_port *dst; - -- if ((on && dev->component[MMAL_COMPONENT_PREVIEW]->enabled) || -- (!on && !dev->component[MMAL_COMPONENT_PREVIEW]->enabled)) -+ if ((on && dev->component[COMP_PREVIEW]->enabled) || -+ (!on && !dev->component[COMP_PREVIEW]->enabled)) - return 0; /* already in requested state */ - - src = -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_PREVIEW]; -+ &dev->component[COMP_CAMERA]-> -+ output[CAM_PORT_PREVIEW]; - - if (!on) { - /* disconnect preview ports and disable component */ -@@ -808,14 +808,14 @@ static int vidioc_overlay(struct file *f - if (ret >= 0) - ret = vchiq_mmal_component_disable( - dev->instance, -- dev->component[MMAL_COMPONENT_PREVIEW]); -+ dev->component[COMP_PREVIEW]); - - disable_camera(dev); - return ret; - } - - /* set preview port format and connect it to output */ -- dst = &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]; -+ dst = &dev->component[COMP_PREVIEW]->input[0]; - - ret = vchiq_mmal_port_set_format(dev->instance, src); - if (ret < 0) -@@ -832,7 +832,7 @@ static int vidioc_overlay(struct file *f - - ret = vchiq_mmal_component_enable( - dev->instance, -- dev->component[MMAL_COMPONENT_PREVIEW]); -+ dev->component[COMP_PREVIEW]); - if (ret < 0) - return ret; - -@@ -853,8 +853,8 @@ static int vidioc_g_fbuf(struct file *fi - */ - struct bm2835_mmal_dev *dev = video_drvdata(file); - struct vchiq_mmal_port *preview_port = -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_PREVIEW]; -+ &dev->component[COMP_CAMERA]-> -+ output[CAM_PORT_PREVIEW]; - - a->capability = V4L2_FBUF_CAP_EXTERNOVERLAY | - V4L2_FBUF_CAP_GLOBAL_ALPHA; -@@ -1057,31 +1057,31 @@ static int mmal_setup_components(struct - } - /* format dependent port setup */ - switch (mfmt->mmal_component) { -- case MMAL_COMPONENT_CAMERA: -+ case COMP_CAMERA: - /* Make a further decision on port based on resolution */ - if (f->fmt.pix.width <= max_video_width - && f->fmt.pix.height <= max_video_height) - camera_port = port = -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_VIDEO]; -+ &dev->component[COMP_CAMERA]-> -+ output[CAM_PORT_VIDEO]; - else - camera_port = port = -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_CAPTURE]; -+ &dev->component[COMP_CAMERA]-> -+ output[CAM_PORT_CAPTURE]; - break; -- case MMAL_COMPONENT_IMAGE_ENCODE: -- encode_component = dev->component[MMAL_COMPONENT_IMAGE_ENCODE]; -- port = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; -+ case COMP_IMAGE_ENCODE: -+ encode_component = dev->component[COMP_IMAGE_ENCODE]; -+ port = &dev->component[COMP_IMAGE_ENCODE]->output[0]; - camera_port = -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_CAPTURE]; -+ &dev->component[COMP_CAMERA]-> -+ output[CAM_PORT_CAPTURE]; - break; -- case MMAL_COMPONENT_VIDEO_ENCODE: -- encode_component = dev->component[MMAL_COMPONENT_VIDEO_ENCODE]; -- port = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ case COMP_VIDEO_ENCODE: -+ encode_component = dev->component[COMP_VIDEO_ENCODE]; -+ port = &dev->component[COMP_VIDEO_ENCODE]->output[0]; - camera_port = -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_VIDEO]; -+ &dev->component[COMP_CAMERA]-> -+ output[CAM_PORT_VIDEO]; - break; - default: - break; -@@ -1123,13 +1123,12 @@ static int mmal_setup_components(struct - - if (!ret - && camera_port == -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_VIDEO]) { -+ &dev->component[COMP_CAMERA]-> -+ output[CAM_PORT_VIDEO]) { - bool overlay_enabled = -- !!dev->component[MMAL_COMPONENT_PREVIEW]->enabled; -+ !!dev->component[COMP_PREVIEW]->enabled; - struct vchiq_mmal_port *preview_port = -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_PREVIEW]; -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW]; - /* Preview and encode ports need to match on resolution */ - if (overlay_enabled) { - /* Need to disable the overlay before we can update -@@ -1160,7 +1159,7 @@ static int mmal_setup_components(struct - ret = vchiq_mmal_port_connect_tunnel( - dev->instance, - preview_port, -- &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); -+ &dev->component[COMP_PREVIEW]->input[0]); - if (!ret) - ret = vchiq_mmal_port_enable(dev->instance, - preview_port, -@@ -1214,11 +1213,11 @@ static int mmal_setup_components(struct - port->format.encoding_variant = 0; - /* Set any encoding specific parameters */ - switch (mfmt->mmal_component) { -- case MMAL_COMPONENT_VIDEO_ENCODE: -+ case COMP_VIDEO_ENCODE: - port->format.bitrate = - dev->capture.encode_bitrate; - break; -- case MMAL_COMPONENT_IMAGE_ENCODE: -+ case COMP_IMAGE_ENCODE: - /* Could set EXIF parameters here */ - break; - default: -@@ -1593,14 +1592,14 @@ static int mmal_init(struct bm2835_mmal_ - - /* get the camera component ready */ - ret = vchiq_mmal_component_init(dev->instance, "ril.camera", -- &dev->component[MMAL_COMPONENT_CAMERA]); -+ &dev->component[COMP_CAMERA]); - if (ret < 0) - goto unreg_mmal; - -- camera = dev->component[MMAL_COMPONENT_CAMERA]; -- if (camera->outputs < MMAL_CAMERA_PORT_COUNT) { -+ camera = dev->component[COMP_CAMERA]; -+ if (camera->outputs < CAM_PORT_COUNT) { - v4l2_err(&dev->v4l2_dev, "%s: too few camera outputs %d needed %d\n", -- __func__, camera->outputs, MMAL_CAMERA_PORT_COUNT); -+ __func__, camera->outputs, CAM_PORT_COUNT); - ret = -EINVAL; - goto unreg_camera; - } -@@ -1622,7 +1621,7 @@ static int mmal_init(struct bm2835_mmal_ - dev->rgb_bgr_swapped = true; - param_size = sizeof(supported_encodings); - ret = vchiq_mmal_port_parameter_get(dev->instance, -- &camera->output[MMAL_CAMERA_PORT_CAPTURE], -+ &camera->output[CAM_PORT_CAPTURE], - MMAL_PARAMETER_SUPPORTED_ENCODINGS, - &supported_encodings, - ¶m_size); -@@ -1643,7 +1642,7 @@ static int mmal_init(struct bm2835_mmal_ - } - } - } -- format = &camera->output[MMAL_CAMERA_PORT_PREVIEW].format; -+ format = &camera->output[CAM_PORT_PREVIEW].format; - - format->encoding = MMAL_ENCODING_OPAQUE; - format->encoding_variant = MMAL_ENCODING_I420; -@@ -1657,7 +1656,7 @@ static int mmal_init(struct bm2835_mmal_ - format->es->video.frame_rate.num = 0; /* Rely on fps_range */ - format->es->video.frame_rate.den = 1; - -- format = &camera->output[MMAL_CAMERA_PORT_VIDEO].format; -+ format = &camera->output[CAM_PORT_VIDEO].format; - - format->encoding = MMAL_ENCODING_OPAQUE; - format->encoding_variant = MMAL_ENCODING_I420; -@@ -1671,7 +1670,7 @@ static int mmal_init(struct bm2835_mmal_ - format->es->video.frame_rate.num = 0; /* Rely on fps_range */ - format->es->video.frame_rate.den = 1; - -- format = &camera->output[MMAL_CAMERA_PORT_CAPTURE].format; -+ format = &camera->output[CAM_PORT_CAPTURE].format; - - format->encoding = MMAL_ENCODING_OPAQUE; - -@@ -1695,28 +1694,28 @@ static int mmal_init(struct bm2835_mmal_ - /* get the preview component ready */ - ret = vchiq_mmal_component_init( - dev->instance, "ril.video_render", -- &dev->component[MMAL_COMPONENT_PREVIEW]); -+ &dev->component[COMP_PREVIEW]); - if (ret < 0) - goto unreg_camera; - -- if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) { -+ if (dev->component[COMP_PREVIEW]->inputs < 1) { - ret = -EINVAL; - v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", -- __func__, dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1); -+ __func__, dev->component[COMP_PREVIEW]->inputs, 1); - goto unreg_preview; - } - - /* get the image encoder component ready */ - ret = vchiq_mmal_component_init( - dev->instance, "ril.image_encode", -- &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); -+ &dev->component[COMP_IMAGE_ENCODE]); - if (ret < 0) - goto unreg_preview; - -- if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) { -+ if (dev->component[COMP_IMAGE_ENCODE]->inputs < 1) { - ret = -EINVAL; - v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", -- __func__, dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs, -+ __func__, dev->component[COMP_IMAGE_ENCODE]->inputs, - 1); - goto unreg_image_encoder; - } -@@ -1724,21 +1723,21 @@ static int mmal_init(struct bm2835_mmal_ - /* get the video encoder component ready */ - ret = vchiq_mmal_component_init(dev->instance, "ril.video_encode", - &dev-> -- component[MMAL_COMPONENT_VIDEO_ENCODE]); -+ component[COMP_VIDEO_ENCODE]); - if (ret < 0) - goto unreg_image_encoder; - -- if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) { -+ if (dev->component[COMP_VIDEO_ENCODE]->inputs < 1) { - ret = -EINVAL; - v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n", -- __func__, dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs, -+ __func__, dev->component[COMP_VIDEO_ENCODE]->inputs, - 1); - goto unreg_vid_encoder; - } - - { - struct vchiq_mmal_port *encoder_port = -- &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ &dev->component[COMP_VIDEO_ENCODE]->output[0]; - encoder_port->format.encoding = MMAL_ENCODING_H264; - ret = vchiq_mmal_port_set_format(dev->instance, - encoder_port); -@@ -1749,12 +1748,12 @@ static int mmal_init(struct bm2835_mmal_ - - vchiq_mmal_port_parameter_set( - dev->instance, -- &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, -+ &dev->component[COMP_VIDEO_ENCODE]->control, - MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, - &enable, sizeof(enable)); - - vchiq_mmal_port_parameter_set(dev->instance, -- &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, -+ &dev->component[COMP_VIDEO_ENCODE]->control, - MMAL_PARAMETER_MINIMISE_FRAGMENTATION, - &enable, - sizeof(enable)); -@@ -1772,23 +1771,23 @@ unreg_vid_encoder: - pr_err("Cleanup: Destroy video encoder\n"); - vchiq_mmal_component_finalise( - dev->instance, -- dev->component[MMAL_COMPONENT_VIDEO_ENCODE]); -+ dev->component[COMP_VIDEO_ENCODE]); - - unreg_image_encoder: - pr_err("Cleanup: Destroy image encoder\n"); - vchiq_mmal_component_finalise( - dev->instance, -- dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); -+ dev->component[COMP_IMAGE_ENCODE]); - - unreg_preview: - pr_err("Cleanup: Destroy video render\n"); - vchiq_mmal_component_finalise(dev->instance, -- dev->component[MMAL_COMPONENT_PREVIEW]); -+ dev->component[COMP_PREVIEW]); - - unreg_camera: - pr_err("Cleanup: Destroy camera\n"); - vchiq_mmal_component_finalise(dev->instance, -- dev->component[MMAL_COMPONENT_CAMERA]); -+ dev->component[COMP_CAMERA]); - - unreg_mmal: - vchiq_mmal_finalise(dev->instance); -@@ -1844,21 +1843,21 @@ static void bcm2835_cleanup_instance(str - dev->capture.encode_component); - } - vchiq_mmal_component_disable(dev->instance, -- dev->component[MMAL_COMPONENT_CAMERA]); -+ dev->component[COMP_CAMERA]); - - vchiq_mmal_component_finalise(dev->instance, - dev-> -- component[MMAL_COMPONENT_VIDEO_ENCODE]); -+ component[COMP_VIDEO_ENCODE]); - - vchiq_mmal_component_finalise(dev->instance, - dev-> -- component[MMAL_COMPONENT_IMAGE_ENCODE]); -+ component[COMP_IMAGE_ENCODE]); - - vchiq_mmal_component_finalise(dev->instance, -- dev->component[MMAL_COMPONENT_PREVIEW]); -+ dev->component[COMP_PREVIEW]); - - vchiq_mmal_component_finalise(dev->instance, -- dev->component[MMAL_COMPONENT_CAMERA]); -+ dev->component[COMP_CAMERA]); - - v4l2_ctrl_handler_free(&dev->ctrl_handler); - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -@@ -16,18 +16,18 @@ - #define V4L2_CTRL_COUNT 29 /* number of v4l controls */ - - enum { -- MMAL_COMPONENT_CAMERA = 0, -- MMAL_COMPONENT_PREVIEW, -- MMAL_COMPONENT_IMAGE_ENCODE, -- MMAL_COMPONENT_VIDEO_ENCODE, -- MMAL_COMPONENT_COUNT -+ COMP_CAMERA = 0, -+ COMP_PREVIEW, -+ COMP_IMAGE_ENCODE, -+ COMP_VIDEO_ENCODE, -+ COMP_COUNT - }; - - enum { -- MMAL_CAMERA_PORT_PREVIEW = 0, -- MMAL_CAMERA_PORT_VIDEO, -- MMAL_CAMERA_PORT_CAPTURE, -- MMAL_CAMERA_PORT_COUNT -+ CAM_PORT_PREVIEW = 0, -+ CAM_PORT_VIDEO, -+ CAM_PORT_CAPTURE, -+ CAM_PORT_COUNT - }; - - #define PREVIEW_LAYER 2 -@@ -61,7 +61,7 @@ struct bm2835_mmal_dev { - - /* allocated mmal instance and components */ - struct vchiq_mmal_instance *instance; -- struct vchiq_mmal_component *component[MMAL_COMPONENT_COUNT]; -+ struct vchiq_mmal_component *component[COMP_COUNT]; - int camera_use_count; - - struct v4l2_window overlay; ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -176,7 +176,7 @@ static int ctrl_set_rational(struct bm28 - struct mmal_parameter_rational rational_value; - struct vchiq_mmal_port *control; - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - rational_value.num = ctrl->val; - rational_value.den = 100; -@@ -194,7 +194,7 @@ static int ctrl_set_value(struct bm2835_ - u32 u32_value; - struct vchiq_mmal_port *control; - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - u32_value = ctrl->val; - -@@ -219,7 +219,7 @@ static int ctrl_set_iso(struct bm2835_mm - dev->manual_iso_enabled = - (ctrl->val == V4L2_ISO_SENSITIVITY_MANUAL); - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - if (dev->manual_iso_enabled) - u32_value = dev->iso; -@@ -238,7 +238,7 @@ static int ctrl_set_value_ev(struct bm28 - s32 s32_value; - struct vchiq_mmal_port *control; - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - s32_value = (ctrl->val - 12) * 2; /* Convert from index to 1/6ths */ - -@@ -255,7 +255,7 @@ static int ctrl_set_rotate(struct bm2835 - u32 u32_value; - struct vchiq_mmal_component *camera; - -- camera = dev->component[MMAL_COMPONENT_CAMERA]; -+ camera = dev->component[COMP_CAMERA]; - - u32_value = ((ctrl->val % 360) / 90) * 90; - -@@ -291,7 +291,7 @@ static int ctrl_set_flip(struct bm2835_m - else - dev->vflip = ctrl->val; - -- camera = dev->component[MMAL_COMPONENT_CAMERA]; -+ camera = dev->component[COMP_CAMERA]; - - if (dev->hflip && dev->vflip) - u32_value = MMAL_PARAM_MIRROR_BOTH; -@@ -330,7 +330,7 @@ static int ctrl_set_exposure(struct bm28 - struct vchiq_mmal_port *control; - int ret = 0; - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - if (mmal_ctrl->mmal_id == MMAL_PARAMETER_SHUTTER_SPEED) { - /* V4L2 is in 100usec increments. -@@ -405,7 +405,7 @@ static int ctrl_set_metering_mode(struct - struct vchiq_mmal_port *control; - u32 u32_value = dev->metering_mode; - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - return vchiq_mmal_port_parameter_set(dev->instance, control, - mmal_ctrl->mmal_id, -@@ -421,7 +421,7 @@ static int ctrl_set_flicker_avoidance(st - u32 u32_value; - struct vchiq_mmal_port *control; - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - switch (ctrl->val) { - case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED: -@@ -450,7 +450,7 @@ static int ctrl_set_awb_mode(struct bm28 - u32 u32_value; - struct vchiq_mmal_port *control; - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - switch (ctrl->val) { - case V4L2_WHITE_BALANCE_MANUAL: -@@ -506,7 +506,7 @@ static int ctrl_set_awb_gains(struct bm2 - struct vchiq_mmal_port *control; - struct mmal_parameter_awbgains gains; - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - if (ctrl->id == V4L2_CID_RED_BALANCE) - dev->red_gain = ctrl->val; -@@ -554,7 +554,7 @@ static int ctrl_set_image_effect(struct - v4l2_to_mmal_effects_values[i].v; - } - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - ret = vchiq_mmal_port_parameter_set( - dev->instance, control, -@@ -587,7 +587,7 @@ static int ctrl_set_colfx(struct bm2835_ - int ret = -EINVAL; - struct vchiq_mmal_port *control; - -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - dev->colourfx.enable = (ctrl->val & 0xff00) >> 8; - dev->colourfx.enable = ctrl->val & 0xff; -@@ -613,7 +613,7 @@ static int ctrl_set_bitrate(struct bm283 - - dev->capture.encode_bitrate = ctrl->val; - -- encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ encoder_out = &dev->component[COMP_VIDEO_ENCODE]->output[0]; - - ret = vchiq_mmal_port_parameter_set(dev->instance, encoder_out, - mmal_ctrl->mmal_id, -@@ -629,7 +629,7 @@ static int ctrl_set_bitrate_mode(struct - u32 bitrate_mode; - struct vchiq_mmal_port *encoder_out; - -- encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ encoder_out = &dev->component[COMP_VIDEO_ENCODE]->output[0]; - - dev->capture.encode_bitrate_mode = ctrl->val; - switch (ctrl->val) { -@@ -656,7 +656,7 @@ static int ctrl_set_image_encode_output( - u32 u32_value; - struct vchiq_mmal_port *jpeg_out; - -- jpeg_out = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; -+ jpeg_out = &dev->component[COMP_IMAGE_ENCODE]->output[0]; - - u32_value = ctrl->val; - -@@ -672,7 +672,7 @@ static int ctrl_set_video_encode_param_o - u32 u32_value; - struct vchiq_mmal_port *vid_enc_ctl; - -- vid_enc_ctl = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ vid_enc_ctl = &dev->component[COMP_VIDEO_ENCODE]->output[0]; - - u32_value = ctrl->val; - -@@ -785,7 +785,7 @@ static int ctrl_set_video_encode_profile - } - - ret = vchiq_mmal_port_parameter_set(dev->instance, -- &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0], -+ &dev->component[COMP_VIDEO_ENCODE]->output[0], - mmal_ctrl->mmal_id, - ¶m, sizeof(param)); - } -@@ -803,7 +803,7 @@ static int ctrl_set_scene_mode(struct bm - v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, - "scene mode selected %d, was %d\n", ctrl->val, - dev->scene_mode); -- control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ control = &dev->component[COMP_CAMERA]->control; - - if (ctrl->val == dev->scene_mode) - return 0; -@@ -1221,18 +1221,15 @@ int set_framerate_params(struct bm2835_m - fps_range.fps_high.den); - - ret = vchiq_mmal_port_parameter_set(dev->instance, -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_PREVIEW], -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW], - MMAL_PARAMETER_FPS_RANGE, - &fps_range, sizeof(fps_range)); - ret += vchiq_mmal_port_parameter_set(dev->instance, -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_VIDEO], -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO], - MMAL_PARAMETER_FPS_RANGE, - &fps_range, sizeof(fps_range)); - ret += vchiq_mmal_port_parameter_set(dev->instance, -- &dev->component[MMAL_COMPONENT_CAMERA]-> -- output[MMAL_CAMERA_PORT_CAPTURE], -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE], - MMAL_PARAMETER_FPS_RANGE, - &fps_range, sizeof(fps_range)); - if (ret) diff --git a/target/linux/brcm2708/patches-4.19/950-0246-staging-mmal-vchiq-Make-timeout-a-defined-parameter.patch b/target/linux/brcm2708/patches-4.19/950-0246-staging-mmal-vchiq-Make-timeout-a-defined-parameter.patch new file mode 100644 index 0000000000..dd6554142d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0246-staging-mmal-vchiq-Make-timeout-a-defined-parameter.patch @@ -0,0 +1,38 @@ +From 301a6a16ec8a8b1a7b89c0cc6df30e79a460214a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 24 Sep 2018 16:57:09 +0100 +Subject: [PATCH] staging: mmal-vchiq: Make timeout a defined parameter + +The timeout period for VPU communications is a useful thing +to extend when debugging. +Set it via a define, rather than a magic number buried in the code. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -44,6 +44,12 @@ MODULE_VERSION("0.0.1"); + */ + #define VCHIQ_MMAL_MAX_COMPONENTS 64 + ++/* ++ * Timeout for synchronous msg responses in seconds. ++ * Helpful to increase this if stopping in the VPU debugger. ++ */ ++#define SYNC_MSG_TIMEOUT 3 ++ + /*#define FULL_MSG_DUMP 1*/ + + #ifdef DEBUG +@@ -692,7 +698,7 @@ static int send_synchronous_mmal_msg(str + } + + timeout = wait_for_completion_timeout(&msg_context->u.sync.cmplt, +- 3 * HZ); ++ SYNC_MSG_TIMEOUT * HZ); + if (timeout == 0) { + pr_err("timed out waiting for sync completion\n"); + ret = -ETIME; diff --git a/target/linux/brcm2708/patches-4.19/950-0247-staging-bcm2835-camera-Fix-multiple-line-dereference.patch b/target/linux/brcm2708/patches-4.19/950-0247-staging-bcm2835-camera-Fix-multiple-line-dereference.patch deleted file mode 100644 index dd0e05029d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0247-staging-bcm2835-camera-Fix-multiple-line-dereference.patch +++ /dev/null @@ -1,133 +0,0 @@ -From 2730c4538b6edbe1e9d4071a8a64aa62f655eeaa Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 21 Feb 2018 15:28:07 +0000 -Subject: [PATCH 247/806] staging: bcm2835-camera: Fix multiple line - dereference errors - -Fix checkpatch errors "Avoid multiple line dereference" - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/bcm2835-camera.c | 41 +++++++------------ - 1 file changed, 14 insertions(+), 27 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -313,8 +313,7 @@ static void buffer_cleanup(struct vb2_bu - static inline bool is_capturing(struct bm2835_mmal_dev *dev) - { - return dev->capture.camera_port == -- &dev-> -- component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; - } - - static void buffer_cb(struct vchiq_mmal_instance *instance, -@@ -795,8 +794,7 @@ static int vidioc_overlay(struct file *f - return 0; /* already in requested state */ - - src = -- &dev->component[COMP_CAMERA]-> -- output[CAM_PORT_PREVIEW]; -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW]; - - if (!on) { - /* disconnect preview ports and disable component */ -@@ -853,8 +851,7 @@ static int vidioc_g_fbuf(struct file *fi - */ - struct bm2835_mmal_dev *dev = video_drvdata(file); - struct vchiq_mmal_port *preview_port = -- &dev->component[COMP_CAMERA]-> -- output[CAM_PORT_PREVIEW]; -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_PREVIEW]; - - a->capability = V4L2_FBUF_CAP_EXTERNOVERLAY | - V4L2_FBUF_CAP_GLOBAL_ALPHA; -@@ -1046,8 +1043,7 @@ static int mmal_setup_components(struct - dev->capture.camera_port, NULL); - dev->capture.camera_port = NULL; - ret = vchiq_mmal_component_disable(dev->instance, -- dev->capture. -- encode_component); -+ dev->capture.encode_component); - if (ret) - v4l2_err(&dev->v4l2_dev, - "Failed to disable encode component %d\n", -@@ -1062,26 +1058,22 @@ static int mmal_setup_components(struct - if (f->fmt.pix.width <= max_video_width - && f->fmt.pix.height <= max_video_height) - camera_port = port = -- &dev->component[COMP_CAMERA]-> -- output[CAM_PORT_VIDEO]; -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]; - else - camera_port = port = -- &dev->component[COMP_CAMERA]-> -- output[CAM_PORT_CAPTURE]; -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; - break; - case COMP_IMAGE_ENCODE: - encode_component = dev->component[COMP_IMAGE_ENCODE]; - port = &dev->component[COMP_IMAGE_ENCODE]->output[0]; - camera_port = -- &dev->component[COMP_CAMERA]-> -- output[CAM_PORT_CAPTURE]; -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; - break; - case COMP_VIDEO_ENCODE: - encode_component = dev->component[COMP_VIDEO_ENCODE]; - port = &dev->component[COMP_VIDEO_ENCODE]->output[0]; - camera_port = -- &dev->component[COMP_CAMERA]-> -- output[CAM_PORT_VIDEO]; -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]; - break; - default: - break; -@@ -1123,8 +1115,7 @@ static int mmal_setup_components(struct - - if (!ret - && camera_port == -- &dev->component[COMP_CAMERA]-> -- output[CAM_PORT_VIDEO]) { -+ &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]) { - bool overlay_enabled = - !!dev->component[COMP_PREVIEW]->enabled; - struct vchiq_mmal_port *preview_port = -@@ -1261,9 +1252,8 @@ static int mmal_setup_components(struct - port->current_buffer.size); - port->current_buffer.size = - (f->fmt.pix.sizeimage < -- (100 << 10)) -- ? (100 << 10) -- : f->fmt.pix.sizeimage; -+ (100 << 10)) ? -+ (100 << 10) : f->fmt.pix.sizeimage; - } - v4l2_dbg(1, bcm2835_v4l2_debug, - &dev->v4l2_dev, -@@ -1722,8 +1712,7 @@ static int mmal_init(struct bm2835_mmal_ - - /* get the video encoder component ready */ - ret = vchiq_mmal_component_init(dev->instance, "ril.video_encode", -- &dev-> -- component[COMP_VIDEO_ENCODE]); -+ &dev->component[COMP_VIDEO_ENCODE]); - if (ret < 0) - goto unreg_image_encoder; - -@@ -1846,12 +1835,10 @@ static void bcm2835_cleanup_instance(str - dev->component[COMP_CAMERA]); - - vchiq_mmal_component_finalise(dev->instance, -- dev-> -- component[COMP_VIDEO_ENCODE]); -+ dev->component[COMP_VIDEO_ENCODE]); - - vchiq_mmal_component_finalise(dev->instance, -- dev-> -- component[COMP_IMAGE_ENCODE]); -+ dev->component[COMP_IMAGE_ENCODE]); - - vchiq_mmal_component_finalise(dev->instance, - dev->component[COMP_PREVIEW]); diff --git a/target/linux/brcm2708/patches-4.19/950-0247-staging-mmal-vchiq-Make-a-mmal_buf-struct-for-passin.patch b/target/linux/brcm2708/patches-4.19/950-0247-staging-mmal-vchiq-Make-a-mmal_buf-struct-for-passin.patch new file mode 100644 index 0000000000..468f036982 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0247-staging-mmal-vchiq-Make-a-mmal_buf-struct-for-passin.patch @@ -0,0 +1,280 @@ +From 862ee4fbd8c6b984f920b88908e33951e51134ca Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 24 Sep 2018 17:33:37 +0100 +Subject: [PATCH] staging: mmal-vchiq: Make a mmal_buf struct for + passing parameters + +The callback from vchi_mmal to the client was growing lots of extra +parameters. Consolidate them into a single struct instead of +growing the list further. +The struct is associated with the client buffer, therefore there +are various changes to setup various containers for the struct, +and pass the appropriate members. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/bcm2835-camera.c | 62 ++++++++++++------- + .../vc04_services/vchiq-mmal/mmal-common.h | 5 ++ + .../vc04_services/vchiq-mmal/mmal-vchiq.c | 29 ++++++--- + .../vc04_services/vchiq-mmal/mmal-vchiq.h | 3 +- + 4 files changed, 64 insertions(+), 35 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -72,6 +72,12 @@ static const struct v4l2_fract + tpf_max = {.numerator = 1, .denominator = FPS_MIN}, + tpf_default = {.numerator = 1000, .denominator = 30000}; + ++/* Container for MMAL and VB2 buffers*/ ++struct vb2_mmal_buffer { ++ struct vb2_v4l2_buffer vb; ++ struct mmal_buffer mmal; ++}; ++ + /* video formats */ + static struct mmal_fmt formats[] = { + { +@@ -267,14 +273,15 @@ static int buffer_init(struct vb2_buffer + { + struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); +- struct mmal_buffer *buf = container_of(vb2, struct mmal_buffer, vb); ++ struct vb2_mmal_buffer *buf = ++ container_of(vb2, struct vb2_mmal_buffer, vb); + + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p, vb %p\n", + __func__, dev, vb); +- buf->buffer = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); +- buf->buffer_size = vb2_plane_size(&buf->vb.vb2_buf, 0); ++ buf->mmal.buffer = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); ++ buf->mmal.buffer_size = vb2_plane_size(&buf->vb.vb2_buf, 0); + +- return mmal_vchi_buffer_init(dev->instance, buf); ++ return mmal_vchi_buffer_init(dev->instance, &buf->mmal); + } + + static int buffer_prepare(struct vb2_buffer *vb) +@@ -303,11 +310,13 @@ static void buffer_cleanup(struct vb2_bu + { + struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); +- struct mmal_buffer *buf = container_of(vb2, struct mmal_buffer, vb); ++ struct vb2_mmal_buffer *buf = ++ container_of(vb2, struct vb2_mmal_buffer, vb); + + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p, vb %p\n", + __func__, dev, vb); +- mmal_vchi_buffer_cleanup(buf); ++ ++ mmal_vchi_buffer_cleanup(&buf->mmal); + } + + static inline bool is_capturing(struct bm2835_mmal_dev *dev) +@@ -319,14 +328,16 @@ static inline bool is_capturing(struct b + static void buffer_cb(struct vchiq_mmal_instance *instance, + struct vchiq_mmal_port *port, + int status, +- struct mmal_buffer *buf, +- unsigned long length, u32 mmal_flags, s64 dts, s64 pts) ++ struct mmal_buffer *mmal_buf) + { + struct bm2835_mmal_dev *dev = port->cb_ctx; ++ struct vb2_mmal_buffer *buf = ++ container_of(mmal_buf, struct vb2_mmal_buffer, mmal); + + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "%s: status:%d, buf:%p, length:%lu, flags %u, pts %lld\n", +- __func__, status, buf, length, mmal_flags, pts); ++ __func__, status, buf, mmal_buf->length, mmal_buf->mmal_flags, ++ mmal_buf->pts); + + if (status != 0) { + /* error in transfer */ +@@ -337,7 +348,7 @@ static void buffer_cb(struct vchiq_mmal_ + return; + } + +- if (length == 0) { ++ if (mmal_buf->length == 0) { + /* stream ended */ + if (dev->capture.frame_count) { + /* empty buffer whilst capturing - expected to be an +@@ -353,7 +364,8 @@ static void buffer_cb(struct vchiq_mmal_ + &dev->capture.frame_count, + sizeof(dev->capture.frame_count)); + } +- if (vchiq_mmal_submit_buffer(instance, port, buf)) ++ if (vchiq_mmal_submit_buffer(instance, port, ++ &buf->mmal)) + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "Failed to return EOS buffer"); + } else { +@@ -382,16 +394,16 @@ static void buffer_cb(struct vchiq_mmal_ + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "Buffer time set as current time - %lld", + buf->vb.vb2_buf.timestamp); +- } else if (pts != 0) { ++ } else if (mmal_buf->pts != 0) { + ktime_t timestamp; +- s64 runtime_us = pts - ++ s64 runtime_us = mmal_buf->pts - + dev->capture.vc_start_timestamp; + timestamp = ktime_add_us(dev->capture.kernel_start_ts, + runtime_us); + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "Convert start time %llu and %llu with offset %llu to %llu\n", + ktime_to_ns(dev->capture.kernel_start_ts), +- dev->capture.vc_start_timestamp, pts, ++ dev->capture.vc_start_timestamp, mmal_buf->pts, + ktime_to_ns(timestamp)); + if (timestamp < dev->capture.last_timestamp) { + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, +@@ -416,15 +428,15 @@ static void buffer_cb(struct vchiq_mmal_ + dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; + buf->vb.sequence = dev->capture.sequence++; + +- vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); +- if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) ++ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, mmal_buf->length); ++ if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) + buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; + + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "Buffer has ts %llu", dev->capture.last_timestamp); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); + +- if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && ++ if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && + is_capturing(dev)) { + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "Grab another frame as buffer has EOS"); +@@ -507,14 +519,16 @@ static void buffer_queue(struct vb2_buff + { + struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); +- struct mmal_buffer *buf = container_of(vb2, struct mmal_buffer, vb); ++ struct vb2_mmal_buffer *buf = ++ container_of(vb2, struct vb2_mmal_buffer, vb); + int ret; + + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "%s: dev:%p buf:%p, idx %u\n", + __func__, dev, buf, vb2->vb2_buf.index); + +- ret = vchiq_mmal_submit_buffer(dev->instance, dev->capture.port, buf); ++ ret = vchiq_mmal_submit_buffer(dev->instance, dev->capture.port, ++ &buf->mmal); + if (ret < 0) + v4l2_err(&dev->v4l2_dev, "%s: error submitting buffer\n", + __func__); +@@ -628,7 +642,7 @@ static void stop_streaming(struct vb2_qu + dev->capture.frame_count = 0; + + /* ensure a format has actually been set */ +- if (!dev->capture.port) { ++ if (!port) { + v4l2_err(&dev->v4l2_dev, + "no capture port - stream not started?\n"); + return; +@@ -648,11 +662,11 @@ static void stop_streaming(struct vb2_qu + + /* disable the connection from camera to encoder */ + ret = vchiq_mmal_port_disable(dev->instance, dev->capture.camera_port); +- if (!ret && dev->capture.camera_port != dev->capture.port) { ++ if (!ret && dev->capture.camera_port != port) { + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "disabling port\n"); +- ret = vchiq_mmal_port_disable(dev->instance, dev->capture.port); +- } else if (dev->capture.camera_port != dev->capture.port) { ++ ret = vchiq_mmal_port_disable(dev->instance, port); ++ } else if (dev->capture.camera_port != port) { + v4l2_err(&dev->v4l2_dev, "port_disable failed, error %d\n", + ret); + } +@@ -1954,7 +1968,7 @@ static int bcm2835_mmal_probe(struct pla + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; + q->drv_priv = dev; +- q->buf_struct_size = sizeof(struct mmal_buffer); ++ q->buf_struct_size = sizeof(struct vb2_mmal_buffer); + q->ops = &bm2835_mmal_video_qops; + q->mem_ops = &vb2_vmalloc_memops; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h +@@ -50,6 +50,11 @@ struct mmal_buffer { + unsigned long buffer_size; /* size of allocated buffer */ + + struct mmal_msg_context *msg_context; ++ ++ unsigned long length; ++ u32 mmal_flags; ++ s64 dts; ++ s64 pts; + }; + + /* */ +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -259,17 +259,25 @@ static void buffer_work_cb(struct work_s + { + struct mmal_msg_context *msg_context = + container_of(work, struct mmal_msg_context, u.bulk.work); ++ struct mmal_buffer *buffer = msg_context->u.bulk.buffer; ++ ++ if (!buffer) { ++ pr_err("%s: ctx: %p, No mmal buffer to pass details\n", ++ __func__, msg_context); ++ return; ++ } ++ ++ buffer->length = msg_context->u.bulk.buffer_used; ++ buffer->mmal_flags = msg_context->u.bulk.mmal_flags; ++ buffer->dts = msg_context->u.bulk.dts; ++ buffer->pts = msg_context->u.bulk.pts; + + atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); + + msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, + msg_context->u.bulk.port, + msg_context->u.bulk.status, +- msg_context->u.bulk.buffer, +- msg_context->u.bulk.buffer_used, +- msg_context->u.bulk.mmal_flags, +- msg_context->u.bulk.dts, +- msg_context->u.bulk.pts); ++ msg_context->u.bulk.buffer); + } + + /* workqueue scheduled callback to handle receiving buffers +@@ -1327,11 +1335,14 @@ static int port_disable(struct vchiq_mma + mmalbuf = list_entry(buf_head, struct mmal_buffer, + list); + list_del(buf_head); +- if (port->buffer_cb) ++ if (port->buffer_cb) { ++ mmalbuf->length = 0; ++ mmalbuf->mmal_flags = 0; ++ mmalbuf->dts = MMAL_TIME_UNKNOWN; ++ mmalbuf->pts = MMAL_TIME_UNKNOWN; + port->buffer_cb(instance, +- port, 0, mmalbuf, 0, 0, +- MMAL_TIME_UNKNOWN, +- MMAL_TIME_UNKNOWN); ++ port, 0, mmalbuf); ++ } + } + + spin_unlock_irqrestore(&port->slock, flags); +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h +@@ -44,8 +44,7 @@ struct vchiq_mmal_port; + typedef void (*vchiq_mmal_buffer_cb)( + struct vchiq_mmal_instance *instance, + struct vchiq_mmal_port *port, +- int status, struct mmal_buffer *buffer, +- unsigned long length, u32 mmal_flags, s64 dts, s64 pts); ++ int status, struct mmal_buffer *buffer); + + struct vchiq_mmal_port { + u32 enabled:1; diff --git a/target/linux/brcm2708/patches-4.19/950-0248-staging-bcm2835-camera-Fix-brace-style-issues.patch b/target/linux/brcm2708/patches-4.19/950-0248-staging-bcm2835-camera-Fix-brace-style-issues.patch deleted file mode 100644 index 93a1041394..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0248-staging-bcm2835-camera-Fix-brace-style-issues.patch +++ /dev/null @@ -1,56 +0,0 @@ -From a023ee926b7e923058203e82edc5405c1e82842c Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 21 Feb 2018 15:37:11 +0000 -Subject: [PATCH 248/806] staging: bcm2835-camera: Fix brace style issues. - -Fix mismatched or missing brace issues flagged by checkpatch. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 3 ++- - drivers/staging/vc04_services/bcm2835-camera/controls.c | 3 ++- - drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c | 3 ++- - 3 files changed, 6 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -569,10 +569,11 @@ static int start_streaming(struct vb2_qu - - /* Flag to indicate just to rely on kernel timestamps */ - dev->capture.vc_start_timestamp = -1; -- } else -+ } else { - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "Start time %lld size %d\n", - dev->capture.vc_start_timestamp, parameter_size); -+ } - - dev->capture.kernel_start_ts = ktime_get(); - dev->capture.last_timestamp = 0; ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -410,8 +410,9 @@ static int ctrl_set_metering_mode(struct - return vchiq_mmal_port_parameter_set(dev->instance, control, - mmal_ctrl->mmal_id, - &u32_value, sizeof(u32_value)); -- } else -+ } else { - return 0; -+ } - } - - static int ctrl_set_flicker_avoidance(struct bm2835_mmal_dev *dev, ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -@@ -1268,9 +1268,10 @@ static int port_parameter_get(struct vch - memcpy(value, &rmsg->u.port_parameter_get_reply.value, - *value_size); - *value_size = rmsg->u.port_parameter_get_reply.size; -- } else -+ } else { - memcpy(value, &rmsg->u.port_parameter_get_reply.value, - rmsg->u.port_parameter_get_reply.size); -+ } - - pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, - ret, port->component->handle, port->handle, parameter_id); diff --git a/target/linux/brcm2708/patches-4.19/950-0248-staging-mmal-vchiq-Add-support-for-event-callbacks.patch b/target/linux/brcm2708/patches-4.19/950-0248-staging-mmal-vchiq-Add-support-for-event-callbacks.patch new file mode 100644 index 0000000000..b79bdb8412 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0248-staging-mmal-vchiq-Add-support-for-event-callbacks.patch @@ -0,0 +1,356 @@ +From adab474d1f91594d6d96d44054586ba36d7f26d4 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 24 Sep 2018 18:15:38 +0100 +Subject: [PATCH] staging: mmal-vchiq: Add support for event callbacks. + +(Preparation for the codec driver). +The codec uses the event mechanism to report things such as +resolution changes. It is signalled by the cmd field of the buffer +being non-zero. + +Add support for passing this information out to the client. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/vchiq-mmal/mmal-common.h | 1 + + .../vc04_services/vchiq-mmal/mmal-msg.h | 35 ++++ + .../vc04_services/vchiq-mmal/mmal-vchiq.c | 170 ++++++++++++++++-- + .../vc04_services/vchiq-mmal/mmal-vchiq.h | 4 + + 4 files changed, 196 insertions(+), 14 deletions(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h +@@ -51,6 +51,7 @@ struct mmal_buffer { + + struct mmal_msg_context *msg_context; + ++ u32 cmd; /* MMAL command. 0=data. */ + unsigned long length; + u32 mmal_flags; + s64 dts; +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h +@@ -346,6 +346,41 @@ struct mmal_msg_port_parameter_get_reply + /* event messages */ + #define MMAL_WORKER_EVENT_SPACE 256 + ++/* Four CC's for events */ ++#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) ++ ++#define MMAL_EVENT_ERROR MMAL_FOURCC('E', 'R', 'R', 'O') ++#define MMAL_EVENT_EOS MMAL_FOURCC('E', 'E', 'O', 'S') ++#define MMAL_EVENT_FORMAT_CHANGED MMAL_FOURCC('E', 'F', 'C', 'H') ++#define MMAL_EVENT_PARAMETER_CHANGED MMAL_FOURCC('E', 'P', 'C', 'H') ++ ++/* Structs for each of the event message payloads */ ++struct mmal_msg_event_eos { ++ u32 port_type; /**< Type of port that received the end of stream */ ++ u32 port_index; /**< Index of port that received the end of stream */ ++}; ++ ++/** Format changed event data. */ ++struct mmal_msg_event_format_changed { ++ /* Minimum size of buffers the port requires */ ++ u32 buffer_size_min; ++ /* Minimum number of buffers the port requires */ ++ u32 buffer_num_min; ++ /* Size of buffers the port recommends for optimal performance. ++ * A value of zero means no special recommendation. ++ */ ++ u32 buffer_size_recommended; ++ /* Number of buffers the port recommends for optimal ++ * performance. A value of zero means no special recommendation. ++ */ ++ u32 buffer_num_recommended; ++ ++ u32 es_ptr; ++ struct mmal_es_format format; ++ union mmal_es_specific_format es; ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; ++}; ++ + struct mmal_msg_event_to_host { + u32 client_component; /* component context */ + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -151,6 +151,8 @@ struct mmal_msg_context { + /* Presentation and Decode timestamps */ + s64 pts; + s64 dts; ++ /* MMAL buffer command flag */ ++ u32 cmd; + + int status; /* context status */ + +@@ -238,18 +240,6 @@ release_msg_context(struct mmal_msg_cont + kfree(msg_context); + } + +-/* deals with receipt of event to host message */ +-static void event_to_host_cb(struct vchiq_mmal_instance *instance, +- struct mmal_msg *msg, u32 msg_len) +-{ +- pr_debug("unhandled event\n"); +- pr_debug("component:%u port type:%d num:%d cmd:0x%x length:%d\n", +- msg->u.event_to_host.client_component, +- msg->u.event_to_host.port_type, +- msg->u.event_to_host.port_num, +- msg->u.event_to_host.cmd, msg->u.event_to_host.length); +-} +- + /* workqueue scheduled callback + * + * we do this because it is important we do not call any other vchiq +@@ -271,13 +261,18 @@ static void buffer_work_cb(struct work_s + buffer->mmal_flags = msg_context->u.bulk.mmal_flags; + buffer->dts = msg_context->u.bulk.dts; + buffer->pts = msg_context->u.bulk.pts; ++ buffer->cmd = msg_context->u.bulk.cmd; + +- atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); ++ if (!buffer->cmd) ++ atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); + + msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, + msg_context->u.bulk.port, + msg_context->u.bulk.status, + msg_context->u.bulk.buffer); ++ ++ if (buffer->cmd) ++ mutex_unlock(&msg_context->u.bulk.port->event_context_mutex); + } + + /* workqueue scheduled callback to handle receiving buffers +@@ -356,6 +351,7 @@ static int bulk_receive(struct vchiq_mma + msg_context->u.bulk.buffer_used = rd_len; + msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; + msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; ++ msg_context->u.bulk.cmd = msg->u.buffer_from_host.buffer_header.cmd; + + queue_work(msg_context->instance->bulk_wq, + &msg_context->u.bulk.buffer_to_host_work); +@@ -457,6 +453,103 @@ buffer_from_host(struct vchiq_mmal_insta + return ret; + } + ++/* deals with receipt of event to host message */ ++static void event_to_host_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, u32 msg_len) ++{ ++ /* FIXME: Not going to work on 64 bit */ ++ struct vchiq_mmal_component *component = ++ (struct vchiq_mmal_component *)msg->u.event_to_host.client_component; ++ struct vchiq_mmal_port *port = NULL; ++ struct mmal_msg_context *msg_context; ++ u32 port_num = msg->u.event_to_host.port_num; ++ ++ if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) { ++ pr_err("%s: MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n", ++ __func__); ++ return; ++ } ++ ++ switch (msg->u.event_to_host.port_type) { ++ case MMAL_PORT_TYPE_CONTROL: ++ if (port_num) { ++ pr_err("%s: port_num of %u >= number of ports 1", ++ __func__, port_num); ++ return; ++ } ++ port = &component->control; ++ break; ++ case MMAL_PORT_TYPE_INPUT: ++ if (port_num >= component->inputs) { ++ pr_err("%s: port_num of %u >= number of ports %u", ++ __func__, port_num, ++ port_num >= component->inputs); ++ return; ++ } ++ port = &component->input[port_num]; ++ break; ++ case MMAL_PORT_TYPE_OUTPUT: ++ if (port_num >= component->outputs) { ++ pr_err("%s: port_num of %u >= number of ports %u", ++ __func__, port_num, ++ port_num >= component->outputs); ++ return; ++ } ++ port = &component->output[port_num]; ++ break; ++ case MMAL_PORT_TYPE_CLOCK: ++ if (port_num >= component->clocks) { ++ pr_err("%s: port_num of %u >= number of ports %u", ++ __func__, port_num, ++ port_num >= component->clocks); ++ return; ++ } ++ port = &component->clock[port_num]; ++ break; ++ default: ++ break; ++ } ++ ++ if (!mutex_trylock(&port->event_context_mutex)) { ++ pr_err("dropping event 0x%x\n", msg->u.event_to_host.cmd); ++ return; ++ } ++ msg_context = port->event_context; ++ ++ if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) { ++ /* message reception had an error */ ++ //pr_warn ++ pr_err("%s: error %d in reply\n", __func__, msg->h.status); ++ ++ msg_context->u.bulk.status = msg->h.status; ++ } else if (msg->u.event_to_host.length > MMAL_WORKER_EVENT_SPACE) { ++ /* data is not in message, queue a bulk receive */ ++ pr_err("%s: payload not in message - bulk receive??! NOT SUPPORTED\n", ++ __func__); ++ msg_context->u.bulk.status = -1; ++ } else { ++ memcpy(msg_context->u.bulk.buffer->buffer, ++ msg->u.event_to_host.data, ++ msg->u.event_to_host.length); ++ ++ msg_context->u.bulk.buffer_used = ++ msg->u.event_to_host.length; ++ ++ msg_context->u.bulk.mmal_flags = 0; ++ msg_context->u.bulk.dts = MMAL_TIME_UNKNOWN; ++ msg_context->u.bulk.pts = MMAL_TIME_UNKNOWN; ++ msg_context->u.bulk.cmd = msg->u.event_to_host.cmd; ++ ++ pr_debug("event component:%u port type:%d num:%d cmd:0x%x length:%d\n", ++ msg->u.event_to_host.client_component, ++ msg->u.event_to_host.port_type, ++ msg->u.event_to_host.port_num, ++ msg->u.event_to_host.cmd, msg->u.event_to_host.length); ++ } ++ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ + /* deals with receipt of buffer to host message */ + static void buffer_to_host_cb(struct vchiq_mmal_instance *instance, + struct mmal_msg *msg, u32 msg_len) +@@ -1340,6 +1433,7 @@ static int port_disable(struct vchiq_mma + mmalbuf->mmal_flags = 0; + mmalbuf->dts = MMAL_TIME_UNKNOWN; + mmalbuf->pts = MMAL_TIME_UNKNOWN; ++ mmalbuf->cmd = 0; + port->buffer_cb(instance, + port, 0, mmalbuf); + } +@@ -1641,6 +1735,43 @@ int mmal_vchi_buffer_cleanup(struct mmal + } + EXPORT_SYMBOL_GPL(mmal_vchi_buffer_cleanup); + ++static void init_event_context(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ struct mmal_msg_context *ctx = get_msg_context(instance); ++ ++ mutex_init(&port->event_context_mutex); ++ ++ port->event_context = ctx; ++ ctx->u.bulk.instance = instance; ++ ctx->u.bulk.port = port; ++ ctx->u.bulk.buffer = ++ kzalloc(sizeof(*ctx->u.bulk.buffer), GFP_KERNEL); ++ if (!ctx->u.bulk.buffer) ++ goto release_msg_context; ++ ctx->u.bulk.buffer->buffer = kzalloc(MMAL_WORKER_EVENT_SPACE, ++ GFP_KERNEL); ++ if (!ctx->u.bulk.buffer->buffer) ++ goto release_buffer; ++ ++ INIT_WORK(&ctx->u.bulk.work, buffer_work_cb); ++ return; ++ ++release_buffer: ++ kfree(ctx->u.bulk.buffer); ++release_msg_context: ++ release_msg_context(ctx); ++} ++ ++static void free_event_context(struct vchiq_mmal_port *port) ++{ ++ struct mmal_msg_context *ctx = port->event_context; ++ ++ kfree(ctx->u.bulk.buffer->buffer); ++ kfree(ctx->u.bulk.buffer); ++ release_msg_context(ctx); ++} ++ + /* Initialise a mmal component and its ports + * + */ +@@ -1684,6 +1815,7 @@ int vchiq_mmal_component_init(struct vch + ret = port_info_get(instance, &component->control); + if (ret < 0) + goto release_component; ++ init_event_context(instance, &component->control); + + for (idx = 0; idx < component->inputs; idx++) { + component->input[idx].type = MMAL_PORT_TYPE_INPUT; +@@ -1694,6 +1826,7 @@ int vchiq_mmal_component_init(struct vch + ret = port_info_get(instance, &component->input[idx]); + if (ret < 0) + goto release_component; ++ init_event_context(instance, &component->input[idx]); + } + + for (idx = 0; idx < component->outputs; idx++) { +@@ -1705,6 +1838,7 @@ int vchiq_mmal_component_init(struct vch + ret = port_info_get(instance, &component->output[idx]); + if (ret < 0) + goto release_component; ++ init_event_context(instance, &component->output[idx]); + } + + for (idx = 0; idx < component->clocks; idx++) { +@@ -1716,6 +1850,7 @@ int vchiq_mmal_component_init(struct vch + ret = port_info_get(instance, &component->clock[idx]); + if (ret < 0) + goto release_component; ++ init_event_context(instance, &component->clock[idx]); + } + + *component_out = component; +@@ -1741,7 +1876,7 @@ EXPORT_SYMBOL_GPL(vchiq_mmal_component_i + int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, + struct vchiq_mmal_component *component) + { +- int ret; ++ int ret, idx; + + if (mutex_lock_interruptible(&instance->vchiq_mutex)) + return -EINTR; +@@ -1753,6 +1888,13 @@ int vchiq_mmal_component_finalise(struct + + component->in_use = 0; + ++ for (idx = 0; idx < component->inputs; idx++) ++ free_event_context(&component->input[idx]); ++ for (idx = 0; idx < component->outputs; idx++) ++ free_event_context(&component->output[idx]); ++ for (idx = 0; idx < component->clocks; idx++) ++ free_event_context(&component->clock[idx]); ++ + mutex_unlock(&instance->vchiq_mutex); + + return ret; +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h +@@ -78,6 +78,10 @@ struct vchiq_mmal_port { + vchiq_mmal_buffer_cb buffer_cb; + /* callback context */ + void *cb_ctx; ++ ++ /* ensure serialised use of the one event context structure */ ++ struct mutex event_context_mutex; ++ struct mmal_msg_context *event_context; + }; + + struct vchiq_mmal_component { diff --git a/target/linux/brcm2708/patches-4.19/950-0249-staging-bcm2835-camera-Fix-missing-lines-between-ite.patch b/target/linux/brcm2708/patches-4.19/950-0249-staging-bcm2835-camera-Fix-missing-lines-between-ite.patch deleted file mode 100644 index 6cef86b4d4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0249-staging-bcm2835-camera-Fix-missing-lines-between-ite.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 6974c0c97b821c30af9f6f4ff9b4b6989cb5a573 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 21 Feb 2018 15:39:26 +0000 -Subject: [PATCH 249/806] staging: bcm2835-camera: Fix missing lines between - items - -Fix checkpatch errors for missing blank lines after variable -or structure declarations. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h | 1 + - drivers/staging/vc04_services/bcm2835-camera/controls.c | 1 + - 2 files changed, 2 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -@@ -130,6 +130,7 @@ int set_framerate_params(struct bm2835_m - (pix_fmt)->pixelformat, (pix_fmt)->bytesperline, \ - (pix_fmt)->sizeimage, (pix_fmt)->colorspace, (pix_fmt)->priv); \ - } -+ - #define v4l2_dump_win_format(level, debug, dev, win_fmt, desc) \ - { \ - v4l2_dbg(level, debug, dev, \ ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -53,6 +53,7 @@ static const s64 ev_bias_qmenu[] = { - static const s64 iso_qmenu[] = { - 0, 100000, 200000, 400000, 800000, - }; -+ - static const uint32_t iso_values[] = { - 0, 100, 200, 400, 800, - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0249-staging-vc04_services-Support-sending-data-to-MMAL-p.patch b/target/linux/brcm2708/patches-4.19/950-0249-staging-vc04_services-Support-sending-data-to-MMAL-p.patch new file mode 100644 index 0000000000..9688bc868a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0249-staging-vc04_services-Support-sending-data-to-MMAL-p.patch @@ -0,0 +1,42 @@ +From 483bef9dcddc4bcb9f4e250d91b31361a919b7ed Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 24 Sep 2018 18:26:02 +0100 +Subject: [PATCH] staging: vc04_services: Support sending data to MMAL + ports + +Add the ability to send data to ports. This only supports +zero copy mode as the required bulk transfer setup calls +are not done. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/vchiq-mmal/mmal-vchiq.c | 18 +++++++++++++----- + 1 file changed, 13 insertions(+), 5 deletions(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -428,11 +428,19 @@ buffer_from_host(struct vchiq_mmal_insta + m.u.buffer_from_host.buffer_header.data = + (u32)(unsigned long)buf->buffer; + m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; +- m.u.buffer_from_host.buffer_header.length = 0; /* nothing used yet */ +- m.u.buffer_from_host.buffer_header.offset = 0; /* no offset */ +- m.u.buffer_from_host.buffer_header.flags = 0; /* no flags */ +- m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; +- m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; ++ if (port->type == MMAL_PORT_TYPE_OUTPUT) { ++ m.u.buffer_from_host.buffer_header.length = 0; ++ m.u.buffer_from_host.buffer_header.offset = 0; ++ m.u.buffer_from_host.buffer_header.flags = 0; ++ m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; ++ m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; ++ } else { ++ m.u.buffer_from_host.buffer_header.length = buf->length; ++ m.u.buffer_from_host.buffer_header.offset = 0; ++ m.u.buffer_from_host.buffer_header.flags = buf->mmal_flags; ++ m.u.buffer_from_host.buffer_header.pts = buf->pts; ++ m.u.buffer_from_host.buffer_header.dts = buf->dts; ++ } + + /* clear buffer type sepecific data */ + memset(&m.u.buffer_from_host.buffer_header_type_specific, 0, diff --git a/target/linux/brcm2708/patches-4.19/950-0250-staging-bcm2835-camera-Fix-logical-continuation-spli.patch b/target/linux/brcm2708/patches-4.19/950-0250-staging-bcm2835-camera-Fix-logical-continuation-spli.patch deleted file mode 100644 index 88770c555c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0250-staging-bcm2835-camera-Fix-logical-continuation-spli.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 5056b62708ac730f36114e1d792d0cc878b43561 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 21 Feb 2018 15:48:54 +0000 -Subject: [PATCH 250/806] staging: bcm2835-camera: Fix logical continuation - splits - -Fix checkpatch errors for "Logical continuations should be -on the previous line". - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-camera/bcm2835-camera.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -545,8 +545,8 @@ static int start_streaming(struct vb2_qu - msleep(300); - - /* enable the connection from camera to encoder (if applicable) */ -- if (dev->capture.camera_port != dev->capture.port -- && dev->capture.camera_port) { -+ if (dev->capture.camera_port != dev->capture.port && -+ dev->capture.camera_port) { - ret = vchiq_mmal_port_enable(dev->instance, - dev->capture.camera_port, NULL); - if (ret) { -@@ -1056,8 +1056,8 @@ static int mmal_setup_components(struct - switch (mfmt->mmal_component) { - case COMP_CAMERA: - /* Make a further decision on port based on resolution */ -- if (f->fmt.pix.width <= max_video_width -- && f->fmt.pix.height <= max_video_height) -+ if (f->fmt.pix.width <= max_video_width && -+ f->fmt.pix.height <= max_video_height) - camera_port = port = - &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]; - else -@@ -1114,8 +1114,8 @@ static int mmal_setup_components(struct - - ret = vchiq_mmal_port_set_format(dev->instance, camera_port); - -- if (!ret -- && camera_port == -+ if (!ret && -+ camera_port == - &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]) { - bool overlay_enabled = - !!dev->component[COMP_PREVIEW]->enabled; diff --git a/target/linux/brcm2708/patches-4.19/950-0250-staging-vc04_services-Fixup-vchiq-mmal-include-order.patch b/target/linux/brcm2708/patches-4.19/950-0250-staging-vc04_services-Fixup-vchiq-mmal-include-order.patch new file mode 100644 index 0000000000..6c54743645 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0250-staging-vc04_services-Fixup-vchiq-mmal-include-order.patch @@ -0,0 +1,36 @@ +From 2a5a03926a8c6ae7375355de00814234e4e303ed Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 25 Sep 2018 16:57:40 +0100 +Subject: [PATCH] staging: vc04_services: Fixup vchiq-mmal include + ordering + +There were dependencies on including the headers in the correct +order. Fix up the headers so that they include the other +headers that they depend on themselves. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h | 1 + + drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h | 1 + + 2 files changed, 2 insertions(+) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h +@@ -38,6 +38,7 @@ + #include "mmal-msg-common.h" + #include "mmal-msg-format.h" + #include "mmal-msg-port.h" ++#include "mmal-vchiq.h" + + enum mmal_msg_type { + MMAL_MSG_TYPE_QUIT = 1, +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h +@@ -16,6 +16,7 @@ + #ifndef MMAL_VCHIQ_H + #define MMAL_VCHIQ_H + ++#include "mmal-common.h" + #include "mmal-msg-format.h" + + #define MAX_PORT_COUNT 4 diff --git a/target/linux/brcm2708/patches-4.19/950-0251-staging-bcm2835-camera-Fix-open-parenthesis-alignmen.patch b/target/linux/brcm2708/patches-4.19/950-0251-staging-bcm2835-camera-Fix-open-parenthesis-alignmen.patch deleted file mode 100644 index 2cbf11064d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0251-staging-bcm2835-camera-Fix-open-parenthesis-alignmen.patch +++ /dev/null @@ -1,137 +0,0 @@ -From 4ed895c5c9f55f565d5ecc19e799e109673db44f Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 21 Feb 2018 15:53:59 +0000 -Subject: [PATCH 251/806] staging: bcm2835-camera: Fix open parenthesis - alignment - -Fix checkpatch "Alignment should match open parenthesis" -errors. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/bcm2835-camera.c | 12 ++++----- - .../vc04_services/bcm2835-camera/controls.c | 25 ++++++++++++------- - .../vc04_services/bcm2835-camera/mmal-vchiq.c | 2 +- - .../vc04_services/bcm2835-camera/mmal-vchiq.h | 6 ++--- - 4 files changed, 25 insertions(+), 20 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -415,8 +415,7 @@ static void buffer_cb(struct vchiq_mmal_ - buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; - - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -- "Buffer has ts %llu", -- dev->capture.last_timestamp); -+ "Buffer has ts %llu", dev->capture.last_timestamp); - vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); - - if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && -@@ -584,8 +583,8 @@ static int start_streaming(struct vb2_qu - vchiq_mmal_port_enable(dev->instance, dev->capture.port, buffer_cb); - if (ret) { - v4l2_err(&dev->v4l2_dev, -- "Failed to enable capture port - error %d. Disabling camera port again\n", -- ret); -+ "Failed to enable capture port - error %d. Disabling camera port again\n", -+ ret); - - vchiq_mmal_port_disable(dev->instance, - dev->capture.camera_port); -@@ -991,8 +990,7 @@ static int vidioc_try_fmt_vid_cap(struct - f->fmt.pix.bytesperline = - (f->fmt.pix.bytesperline + align_mask) & ~align_mask; - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -- "Not removing padding, so bytes/line = %d, " -- "(align_mask %d)\n", -+ "Not removing padding, so bytes/line = %d, (align_mask %d)\n", - f->fmt.pix.bytesperline, align_mask); - } - -@@ -1338,7 +1336,7 @@ static int vidioc_s_fmt_vid_cap(struct f - } - - static int vidioc_enum_framesizes(struct file *file, void *fh, -- struct v4l2_frmsizeenum *fsize) -+ struct v4l2_frmsizeenum *fsize) - { - struct bm2835_mmal_dev *dev = video_drvdata(file); - static const struct v4l2_frmsize_stepwise sizes = { ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -1254,9 +1254,12 @@ int bm2835_mmal_init_controls(struct bm2 - - switch (ctrl->type) { - case MMAL_CONTROL_TYPE_STD: -- dev->ctrls[c] = v4l2_ctrl_new_std(hdl, -- &bm2835_mmal_ctrl_ops, ctrl->id, -- ctrl->min, ctrl->max, ctrl->step, ctrl->def); -+ dev->ctrls[c] = -+ v4l2_ctrl_new_std(hdl, -+ &bm2835_mmal_ctrl_ops, -+ ctrl->id, ctrl->min, -+ ctrl->max, ctrl->step, -+ ctrl->def); - break; - - case MMAL_CONTROL_TYPE_STD_MENU: -@@ -1280,16 +1283,20 @@ int bm2835_mmal_init_controls(struct bm2 - mask = ~mask; - } - -- dev->ctrls[c] = v4l2_ctrl_new_std_menu(hdl, -- &bm2835_mmal_ctrl_ops, ctrl->id, -- ctrl->max, mask, ctrl->def); -+ dev->ctrls[c] = -+ v4l2_ctrl_new_std_menu(hdl, -+ &bm2835_mmal_ctrl_ops, -+ ctrl->id, ctrl->max, -+ mask, ctrl->def); - break; - } - - case MMAL_CONTROL_TYPE_INT_MENU: -- dev->ctrls[c] = v4l2_ctrl_new_int_menu(hdl, -- &bm2835_mmal_ctrl_ops, ctrl->id, -- ctrl->max, ctrl->def, ctrl->imenu); -+ dev->ctrls[c] = -+ v4l2_ctrl_new_int_menu(hdl, -+ &bm2835_mmal_ctrl_ops, -+ ctrl->id, ctrl->max, -+ ctrl->def, ctrl->imenu); - break; - - case MMAL_CONTROL_TYPE_CLUSTER: ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -@@ -651,7 +651,7 @@ static int send_synchronous_mmal_msg(str - if (payload_len > - (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) { - pr_err("payload length %d exceeds max:%d\n", payload_len, -- (int)(MMAL_MSG_MAX_SIZE - -+ (int)(MMAL_MSG_MAX_SIZE - - sizeof(struct mmal_msg_header))); - return -EINVAL; - } ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h -@@ -131,7 +131,7 @@ int vchiq_mmal_port_enable( - * disable a port will dequeue any pending buffers - */ - int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port); -+ struct vchiq_mmal_port *port); - - int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, - struct vchiq_mmal_port *port, -@@ -149,8 +149,8 @@ int vchiq_mmal_port_set_format(struct vc - struct vchiq_mmal_port *port); - - int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *src, -- struct vchiq_mmal_port *dst); -+ struct vchiq_mmal_port *src, -+ struct vchiq_mmal_port *dst); - - int vchiq_mmal_version(struct vchiq_mmal_instance *instance, - u32 *major_out, diff --git a/target/linux/brcm2708/patches-4.19/950-0251-staging-vc04_services-Add-new-vc-sm-cma-driver.patch b/target/linux/brcm2708/patches-4.19/950-0251-staging-vc04_services-Add-new-vc-sm-cma-driver.patch new file mode 100644 index 0000000000..9e9af47a37 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0251-staging-vc04_services-Add-new-vc-sm-cma-driver.patch @@ -0,0 +1,1881 @@ +From 2994fdc0a9d48be68d6e403bc8ddadecfc8d8796 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 25 Sep 2018 10:27:11 +0100 +Subject: [PATCH] staging: vc04_services: Add new vc-sm-cma driver + +This new driver allows contiguous memory blocks to be imported +into the VideoCore VPU memory map, and manages the lifetime of +those objects, only releasing the source dmabuf once the VPU has +confirmed it has finished with it. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/Kconfig | 1 + + drivers/staging/vc04_services/Makefile | 1 + + .../staging/vc04_services/vc-sm-cma/Kconfig | 10 + + .../staging/vc04_services/vc-sm-cma/Makefile | 8 + + drivers/staging/vc04_services/vc-sm-cma/TODO | 2 + + .../staging/vc04_services/vc-sm-cma/vc_sm.c | 838 ++++++++++++++++++ + .../staging/vc04_services/vc-sm-cma/vc_sm.h | 59 ++ + .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 498 +++++++++++ + .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.h | 59 ++ + .../vc04_services/vc-sm-cma/vc_sm_defs.h | 298 +++++++ + .../vc04_services/vc-sm-cma/vc_sm_knl.h | 28 + + 11 files changed, 1802 insertions(+) + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/Kconfig + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/Makefile + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/TODO + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm.c + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm.h + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.h + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_defs.h + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h + +--- a/drivers/staging/vc04_services/Kconfig ++++ b/drivers/staging/vc04_services/Kconfig +@@ -22,6 +22,7 @@ source "drivers/staging/vc04_services/bc + + source "drivers/staging/vc04_services/bcm2835-camera/Kconfig" + source "drivers/staging/vc04_services/vchiq-mmal/Kconfig" ++source "drivers/staging/vc04_services/vc-sm-cma/Kconfig" + + endif + +--- a/drivers/staging/vc04_services/Makefile ++++ b/drivers/staging/vc04_services/Makefile +@@ -13,6 +13,7 @@ vchiq-objs := \ + obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/ + obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-camera/ + obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += vchiq-mmal/ ++obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma/ + + ccflags-y += -Idrivers/staging/vc04_services -D__VCCOREVER__=0x04000000 + +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/Kconfig +@@ -0,0 +1,10 @@ ++config BCM_VC_SM_CMA ++ tristate "VideoCore Shared Memory (CMA) driver" ++ depends on BCM2835_VCHIQ ++ select RBTREE ++ select DMA_SHARED_BUFFER ++ help ++ Say Y here to enable the shared memory interface that ++ supports sharing dmabufs with VideoCore. ++ This operates over the VCHIQ interface to a service ++ running on VideoCore. +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/Makefile +@@ -0,0 +1,8 @@ ++ccflags-y += -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vchi -Idrivers/staging/vc04_services/interface/vchiq_arm ++# -I"drivers/staging/android/ion/" -I"$(srctree)/fs/" ++ccflags-y += -D__VCCOREVER__=0 ++ ++vc-sm-cma-$(CONFIG_BCM_VC_SM_CMA) := \ ++ vc_sm.o vc_sm_cma_vchi.o ++ ++obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma.o +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/TODO +@@ -0,0 +1,2 @@ ++1) Convert to a platform driver. ++ +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -0,0 +1,838 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * VideoCore Shared Memory driver using CMA. ++ * ++ * Copyright: 2018, Raspberry Pi (Trading) Ltd ++ * Dave Stevenson ++ * ++ * Based on vmcs_sm driver from Broadcom Corporation for some API, ++ * and taking some code for CMA/dmabuf handling from the Android Ion ++ * driver (Google/Linaro). ++ * ++ * This is cut down version to only support import of dma_bufs from ++ * other kernel drivers. A more complete implementation of the old ++ * vmcs_sm functionality can follow later. ++ * ++ */ ++ ++/* ---- Include Files ----------------------------------------------------- */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vchiq_connected.h" ++#include "vc_sm_cma_vchi.h" ++ ++#include "vc_sm.h" ++#include "vc_sm_knl.h" ++ ++/* ---- Private Constants and Types --------------------------------------- */ ++ ++#define DEVICE_NAME "vcsm-cma" ++#define DEVICE_MINOR 0 ++ ++#define VC_SM_RESOURCE_NAME_DEFAULT "sm-host-resource" ++ ++#define VC_SM_DIR_ROOT_NAME "vcsm-cma" ++#define VC_SM_STATE "state" ++ ++/* Private file data associated with each opened device. */ ++struct vc_sm_privdata_t { ++ pid_t pid; /* PID of creator. */ ++ ++ int restart_sys; /* Tracks restart on interrupt. */ ++ enum vc_sm_msg_type int_action; /* Interrupted action. */ ++ u32 int_trans_id; /* Interrupted transaction. */ ++}; ++ ++typedef int (*VC_SM_SHOW) (struct seq_file *s, void *v); ++struct sm_pde_t { ++ VC_SM_SHOW show; /* Debug fs function hookup. */ ++ struct dentry *dir_entry; /* Debug fs directory entry. */ ++ void *priv_data; /* Private data */ ++}; ++ ++/* Global state information. */ ++struct sm_state_t { ++ struct platform_device *pdev; ++ ++ struct miscdevice dev; ++ struct sm_instance *sm_handle; /* Handle for videocore service. */ ++ ++ struct mutex map_lock; /* Global map lock. */ ++ struct list_head buffer_list; /* List of buffer. */ ++ ++ struct vc_sm_privdata_t *data_knl; /* Kernel internal data tracking. */ ++ struct dentry *dir_root; /* Debug fs entries root. */ ++ struct sm_pde_t dir_state; /* Debug fs entries state sub-tree. */ ++ ++ bool require_released_callback; /* VPU will send a released msg when it ++ * has finished with a resource. ++ */ ++ u32 int_trans_id; /* Interrupted transaction. */ ++}; ++ ++/* ---- Private Variables ----------------------------------------------- */ ++ ++static struct sm_state_t *sm_state; ++static int sm_inited; ++ ++/* ---- Private Function Prototypes -------------------------------------- */ ++ ++/* ---- Private Functions ------------------------------------------------ */ ++ ++static int vc_sm_cma_seq_file_show(struct seq_file *s, void *v) ++{ ++ struct sm_pde_t *sm_pde; ++ ++ sm_pde = (struct sm_pde_t *)(s->private); ++ ++ if (sm_pde && sm_pde->show) ++ sm_pde->show(s, v); ++ ++ return 0; ++} ++ ++static int vc_sm_cma_single_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, vc_sm_cma_seq_file_show, inode->i_private); ++} ++ ++static const struct file_operations vc_sm_cma_debug_fs_fops = { ++ .open = vc_sm_cma_single_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static int vc_sm_cma_global_state_show(struct seq_file *s, void *v) ++{ ++ struct vc_sm_buffer *resource = NULL; ++ int resource_count = 0; ++ ++ if (!sm_state) ++ return 0; ++ ++ seq_printf(s, "\nVC-ServiceHandle 0x%x\n", ++ (unsigned int)sm_state->sm_handle); ++ ++ /* Log all applicable mapping(s). */ ++ ++ mutex_lock(&sm_state->map_lock); ++ seq_puts(s, "\nResources\n"); ++ if (!list_empty(&sm_state->buffer_list)) { ++ list_for_each_entry(resource, &sm_state->buffer_list, ++ global_buffer_list) { ++ resource_count++; ++ ++ seq_printf(s, "\nResource %p\n", ++ resource); ++ seq_printf(s, " NAME %s\n", ++ resource->name); ++ seq_printf(s, " SIZE %d\n", ++ resource->size); ++ seq_printf(s, " DMABUF %p\n", ++ resource->dma_buf); ++ seq_printf(s, " ATTACH %p\n", ++ resource->attach); ++ seq_printf(s, " SG_TABLE %p\n", ++ resource->sg_table); ++ seq_printf(s, " SGT %p\n", ++ resource->sgt); ++ seq_printf(s, " DMA_ADDR %pad\n", ++ &resource->dma_addr); ++ seq_printf(s, " VC_HANDLE %08x\n", ++ resource->vc_handle); ++ seq_printf(s, " VC_MAPPING %d\n", ++ resource->vpu_state); ++ } ++ } ++ seq_printf(s, "\n\nTotal resource count: %d\n\n", resource_count); ++ ++ mutex_unlock(&sm_state->map_lock); ++ ++ return 0; ++} ++ ++/* ++ * Adds a buffer to the private data list which tracks all the allocated ++ * data. ++ */ ++static void vc_sm_add_resource(struct vc_sm_privdata_t *privdata, ++ struct vc_sm_buffer *buffer) ++{ ++ mutex_lock(&sm_state->map_lock); ++ list_add(&buffer->global_buffer_list, &sm_state->buffer_list); ++ mutex_unlock(&sm_state->map_lock); ++ ++ pr_debug("[%s]: added buffer %p (name %s, size %d)\n", ++ __func__, buffer, buffer->name, buffer->size); ++} ++ ++/* ++ * Release an allocation. ++ * All refcounting is done via the dma buf object. ++ */ ++static void vc_sm_release_resource(struct vc_sm_buffer *buffer, int force) ++{ ++ mutex_lock(&sm_state->map_lock); ++ mutex_lock(&buffer->lock); ++ ++ pr_debug("[%s]: buffer %p (name %s, size %d)\n", ++ __func__, buffer, buffer->name, buffer->size); ++ ++ if (buffer->vc_handle && buffer->vpu_state == VPU_MAPPED) { ++ struct vc_sm_free_t free = { buffer->vc_handle, 0 }; ++ int status = vc_sm_cma_vchi_free(sm_state->sm_handle, &free, ++ &sm_state->int_trans_id); ++ if (status != 0 && status != -EINTR) { ++ pr_err("[%s]: failed to free memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, sm_state->int_trans_id); ++ } ++ ++ if (sm_state->require_released_callback) { ++ /* Need to wait for the VPU to confirm the free */ ++ ++ /* Retain a reference on this until the VPU has ++ * released it ++ */ ++ buffer->vpu_state = VPU_UNMAPPING; ++ goto defer; ++ } ++ buffer->vpu_state = VPU_NOT_MAPPED; ++ buffer->vc_handle = 0; ++ } ++ if (buffer->vc_handle) { ++ /* We've sent the unmap request but not had the response. */ ++ pr_err("[%s]: Waiting for VPU unmap response on %p\n", ++ __func__, buffer); ++ goto defer; ++ } ++ if (buffer->in_use) { ++ /* Don't release dmabuf here - we await the release */ ++ pr_err("[%s]: buffer %p is still in use\n", ++ __func__, buffer); ++ goto defer; ++ } ++ ++ /* Handle cleaning up imported dmabufs */ ++ if (buffer->sgt) { ++ dma_buf_unmap_attachment(buffer->attach, buffer->sgt, ++ DMA_BIDIRECTIONAL); ++ buffer->sgt = NULL; ++ } ++ if (buffer->attach) { ++ dma_buf_detach(buffer->dma_buf, buffer->attach); ++ buffer->attach = NULL; ++ } ++ ++ /* Release the dma_buf (whether ours or imported) */ ++ if (buffer->import_dma_buf) { ++ dma_buf_put(buffer->import_dma_buf); ++ buffer->import_dma_buf = NULL; ++ buffer->dma_buf = NULL; ++ } else if (buffer->dma_buf) { ++ dma_buf_put(buffer->dma_buf); ++ buffer->dma_buf = NULL; ++ } ++ ++ if (buffer->sg_table && !buffer->import_dma_buf) { ++ /* Our own allocation that we need to dma_unmap_sg */ ++ dma_unmap_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, ++ buffer->sg_table->nents, DMA_BIDIRECTIONAL); ++ } ++ ++ /* Free the local resource. Start by removing it from the list */ ++ buffer->private = NULL; ++ list_del(&buffer->global_buffer_list); ++ ++ mutex_unlock(&buffer->lock); ++ mutex_unlock(&sm_state->map_lock); ++ ++ mutex_destroy(&buffer->lock); ++ ++ kfree(buffer); ++ return; ++ ++defer: ++ mutex_unlock(&buffer->lock); ++ mutex_unlock(&sm_state->map_lock); ++} ++ ++/* Create support for private data tracking. */ ++static struct vc_sm_privdata_t *vc_sm_cma_create_priv_data(pid_t id) ++{ ++ char alloc_name[32]; ++ struct vc_sm_privdata_t *file_data = NULL; ++ ++ /* Allocate private structure. */ ++ file_data = kzalloc(sizeof(*file_data), GFP_KERNEL); ++ ++ if (!file_data) ++ return NULL; ++ ++ snprintf(alloc_name, sizeof(alloc_name), "%d", id); ++ ++ file_data->pid = id; ++ ++ return file_data; ++} ++ ++/* Dma_buf operations for chaining through to an imported dma_buf */ ++static ++int vc_sm_import_dma_buf_attach(struct dma_buf *dmabuf, ++ struct dma_buf_attachment *attachment) ++{ ++ struct vc_sm_buffer *res = dmabuf->priv; ++ ++ if (!res->import_dma_buf) ++ return -EINVAL; ++ return res->import_dma_buf->ops->attach(res->import_dma_buf, ++ attachment); ++} ++ ++static ++void vc_sm_import_dma_buf_detatch(struct dma_buf *dmabuf, ++ struct dma_buf_attachment *attachment) ++{ ++ struct vc_sm_buffer *res = dmabuf->priv; ++ ++ if (!res->import_dma_buf) ++ return; ++ res->import_dma_buf->ops->detach(res->import_dma_buf, attachment); ++} ++ ++static ++struct sg_table *vc_sm_import_map_dma_buf(struct dma_buf_attachment *attachment, ++ enum dma_data_direction direction) ++{ ++ struct vc_sm_buffer *res = attachment->dmabuf->priv; ++ ++ if (!res->import_dma_buf) ++ return NULL; ++ return res->import_dma_buf->ops->map_dma_buf(attachment, direction); ++} ++ ++static ++void vc_sm_import_unmap_dma_buf(struct dma_buf_attachment *attachment, ++ struct sg_table *table, ++ enum dma_data_direction direction) ++{ ++ struct vc_sm_buffer *res = attachment->dmabuf->priv; ++ ++ if (!res->import_dma_buf) ++ return; ++ res->import_dma_buf->ops->unmap_dma_buf(attachment, table, direction); ++} ++ ++static ++int vc_sm_import_dmabuf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma) ++{ ++ struct vc_sm_buffer *res = dmabuf->priv; ++ ++ pr_debug("%s: mmap dma_buf %p, res %p, imported db %p\n", __func__, ++ dmabuf, res, res->import_dma_buf); ++ if (!res->import_dma_buf) { ++ pr_err("%s: mmap dma_buf %p- not an imported buffer\n", ++ __func__, dmabuf); ++ return -EINVAL; ++ } ++ return res->import_dma_buf->ops->mmap(res->import_dma_buf, vma); ++} ++ ++static ++void vc_sm_import_dma_buf_release(struct dma_buf *dmabuf) ++{ ++ struct vc_sm_buffer *res = dmabuf->priv; ++ ++ pr_debug("%s: Relasing dma_buf %p\n", __func__, dmabuf); ++ if (!res->import_dma_buf) ++ return; ++ ++ res->in_use = 0; ++ ++ vc_sm_release_resource(res, 0); ++} ++ ++static ++void *vc_sm_import_dma_buf_kmap(struct dma_buf *dmabuf, ++ unsigned long offset) ++{ ++ struct vc_sm_buffer *res = dmabuf->priv; ++ ++ if (!res->import_dma_buf) ++ return NULL; ++ return res->import_dma_buf->ops->map(res->import_dma_buf, ++ offset); ++} ++ ++static ++void vc_sm_import_dma_buf_kunmap(struct dma_buf *dmabuf, ++ unsigned long offset, void *ptr) ++{ ++ struct vc_sm_buffer *res = dmabuf->priv; ++ ++ if (!res->import_dma_buf) ++ return; ++ res->import_dma_buf->ops->unmap(res->import_dma_buf, ++ offset, ptr); ++} ++ ++static ++int vc_sm_import_dma_buf_begin_cpu_access(struct dma_buf *dmabuf, ++ enum dma_data_direction direction) ++{ ++ struct vc_sm_buffer *res = dmabuf->priv; ++ ++ if (!res->import_dma_buf) ++ return -EINVAL; ++ return res->import_dma_buf->ops->begin_cpu_access(res->import_dma_buf, ++ direction); ++} ++ ++static ++int vc_sm_import_dma_buf_end_cpu_access(struct dma_buf *dmabuf, ++ enum dma_data_direction direction) ++{ ++ struct vc_sm_buffer *res = dmabuf->priv; ++ ++ if (!res->import_dma_buf) ++ return -EINVAL; ++ return res->import_dma_buf->ops->end_cpu_access(res->import_dma_buf, ++ direction); ++} ++ ++static const struct dma_buf_ops dma_buf_import_ops = { ++ .map_dma_buf = vc_sm_import_map_dma_buf, ++ .unmap_dma_buf = vc_sm_import_unmap_dma_buf, ++ .mmap = vc_sm_import_dmabuf_mmap, ++ .release = vc_sm_import_dma_buf_release, ++ .attach = vc_sm_import_dma_buf_attach, ++ .detach = vc_sm_import_dma_buf_detatch, ++ .begin_cpu_access = vc_sm_import_dma_buf_begin_cpu_access, ++ .end_cpu_access = vc_sm_import_dma_buf_end_cpu_access, ++ .map = vc_sm_import_dma_buf_kmap, ++ .unmap = vc_sm_import_dma_buf_kunmap, ++}; ++ ++/* Import a dma_buf to be shared with VC. */ ++int ++vc_sm_cma_import_dmabuf_internal(struct vc_sm_privdata_t *private, ++ struct dma_buf *dma_buf, ++ struct dma_buf **imported_buf) ++{ ++ DEFINE_DMA_BUF_EXPORT_INFO(exp_info); ++ struct vc_sm_buffer *buffer = NULL; ++ struct vc_sm_import import = { }; ++ struct vc_sm_import_result result = { }; ++ struct dma_buf_attachment *attach = NULL; ++ struct sg_table *sgt = NULL; ++ int ret = 0; ++ int status; ++ ++ /* Setup our allocation parameters */ ++ pr_debug("%s: importing dma_buf %p\n", __func__, dma_buf); ++ ++ get_dma_buf(dma_buf); ++ dma_buf = dma_buf; ++ ++ attach = dma_buf_attach(dma_buf, &sm_state->pdev->dev); ++ if (IS_ERR(attach)) { ++ ret = PTR_ERR(attach); ++ goto error; ++ } ++ ++ sgt = dma_buf_map_attachment(attach, DMA_BIDIRECTIONAL); ++ if (IS_ERR(sgt)) { ++ ret = PTR_ERR(sgt); ++ goto error; ++ } ++ ++ /* Verify that the address block is contiguous */ ++ if (sgt->nents != 1) { ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ /* Allocate local buffer to track this allocation. */ ++ buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); ++ if (!buffer) { ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ import.type = VC_SM_ALLOC_NON_CACHED; ++ import.addr = (uint32_t)sg_dma_address(sgt->sgl); ++ if ((import.addr & 0xC0000000) != 0xC0000000) { ++ pr_err("%s: Expecting an uncached alias for dma_addr %08x\n", ++ __func__, import.addr); ++ import.addr |= 0xC0000000; ++ } ++ import.size = sg_dma_len(sgt->sgl); ++ import.allocator = current->tgid; ++ import.kernel_id = (uint32_t)buffer; //FIXME: 64 bit support needed. ++ ++ memcpy(import.name, VC_SM_RESOURCE_NAME_DEFAULT, ++ sizeof(VC_SM_RESOURCE_NAME_DEFAULT)); ++ ++ pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %p, size %u\n", ++ __func__, import.name, import.type, (void *)import.addr, ++ import.size); ++ ++ /* Allocate the videocore buffer. */ ++ status = vc_sm_cma_vchi_import(sm_state->sm_handle, &import, &result, ++ &sm_state->int_trans_id); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting import memory action restart (trans_id: %u)\n", ++ __func__, sm_state->int_trans_id); ++ ret = -ERESTARTSYS; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_IMPORT; ++ goto error; ++ } else if (status || !result.res_handle) { ++ pr_debug("[%s]: failed to import memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, sm_state->int_trans_id); ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ mutex_init(&buffer->lock); ++ INIT_LIST_HEAD(&buffer->attachments); ++ memcpy(buffer->name, import.name, ++ min(sizeof(buffer->name), sizeof(import.name) - 1)); ++ ++ /* Keep track of the buffer we created. */ ++ buffer->private = private; ++ buffer->vc_handle = result.res_handle; ++ buffer->size = import.size; ++ buffer->vpu_state = VPU_MAPPED; ++ ++ buffer->import_dma_buf = dma_buf; ++ ++ buffer->attach = attach; ++ buffer->sgt = sgt; ++ buffer->dma_addr = sg_dma_address(sgt->sgl); ++ buffer->in_use = 1; ++ ++ /* ++ * We're done - we need to export a new dmabuf chaining through most ++ * functions, but enabling us to release our own internal references ++ * here. ++ */ ++ exp_info.ops = &dma_buf_import_ops; ++ exp_info.size = import.size; ++ exp_info.flags = O_RDWR; ++ exp_info.priv = buffer; ++ ++ buffer->dma_buf = dma_buf_export(&exp_info); ++ if (IS_ERR(buffer->dma_buf)) { ++ ret = PTR_ERR(buffer->dma_buf); ++ goto error; ++ } ++ ++ vc_sm_add_resource(private, buffer); ++ ++ *imported_buf = buffer->dma_buf; ++ ++ return 0; ++ ++error: ++ if (result.res_handle) { ++ struct vc_sm_free_t free = { result.res_handle, 0 }; ++ ++ vc_sm_cma_vchi_free(sm_state->sm_handle, &free, ++ &sm_state->int_trans_id); ++ } ++ kfree(buffer); ++ if (sgt) ++ dma_buf_unmap_attachment(attach, sgt, DMA_BIDIRECTIONAL); ++ if (attach) ++ dma_buf_detach(dma_buf, attach); ++ dma_buf_put(dma_buf); ++ return ret; ++} ++ ++/* FIXME: Pass a function pointer to this into vc_vchi_sm.c */ ++void ++vc_sm_vpu_event(struct sm_instance *instance, struct vc_sm_result_t *reply, ++ int reply_len) ++{ ++ switch (reply->trans_id & ~0x80000000) { ++ case VC_SM_MSG_TYPE_CLIENT_VERSION: ++ { ++ /* Acknowledge that the firmware supports the version command */ ++ pr_debug("%s: firmware acked version msg. Require release cb\n", ++ __func__); ++ sm_state->require_released_callback = true; ++ } ++ break; ++ case VC_SM_MSG_TYPE_RELEASED: ++ { ++ struct vc_sm_released *release = (struct vc_sm_released *)reply; ++ struct vc_sm_buffer *buffer = ++ (struct vc_sm_buffer *)release->kernel_id; ++ ++ /* ++ * FIXME: Need to check buffer is still valid and allocated ++ * before continuing ++ */ ++ pr_debug("%s: Released addr %08x, size %u, id %08x, mem_handle %08x\n", ++ __func__, release->addr, release->size, ++ release->kernel_id, release->vc_handle); ++ mutex_lock(&buffer->lock); ++ buffer->vc_handle = 0; ++ buffer->vpu_state = VPU_NOT_MAPPED; ++ mutex_unlock(&buffer->lock); ++ ++ vc_sm_release_resource(buffer, 0); ++ } ++ break; ++ default: ++ pr_err("%s: Unknown vpu cmd %x\n", __func__, reply->trans_id); ++ break; ++ } ++} ++ ++/* Videocore connected. */ ++static void vc_sm_connected_init(void) ++{ ++ int ret; ++ VCHI_INSTANCE_T vchi_instance; ++ struct vc_sm_version version; ++ struct vc_sm_result_t version_result; ++ ++ pr_info("[%s]: start\n", __func__); ++ ++ /* ++ * Initialize and create a VCHI connection for the shared memory service ++ * running on videocore. ++ */ ++ ret = vchi_initialise(&vchi_instance); ++ if (ret) { ++ pr_err("[%s]: failed to initialise VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ++ ret = vchi_connect(vchi_instance); ++ if (ret) { ++ pr_err("[%s]: failed to connect VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ++ /* Initialize an instance of the shared memory service. */ ++ sm_state->sm_handle = vc_sm_cma_vchi_init(vchi_instance, 1, ++ vc_sm_vpu_event); ++ if (!sm_state->sm_handle) { ++ pr_err("[%s]: failed to initialize shared memory service\n", ++ __func__); ++ ++ ret = -EPERM; ++ goto err_free_mem; ++ } ++ ++ /* Create a debug fs directory entry (root). */ ++ sm_state->dir_root = debugfs_create_dir(VC_SM_DIR_ROOT_NAME, NULL); ++ if (!sm_state->dir_root) { ++ pr_err("[%s]: failed to create \'%s\' directory entry\n", ++ __func__, VC_SM_DIR_ROOT_NAME); ++ ++ ret = -EPERM; ++ goto err_stop_sm_service; ++ } ++ ++ sm_state->dir_state.show = &vc_sm_cma_global_state_show; ++ sm_state->dir_state.dir_entry = ++ debugfs_create_file(VC_SM_STATE, 0444, sm_state->dir_root, ++ &sm_state->dir_state, ++ &vc_sm_cma_debug_fs_fops); ++ ++ INIT_LIST_HEAD(&sm_state->buffer_list); ++ ++ sm_state->data_knl = vc_sm_cma_create_priv_data(0); ++ if (!sm_state->data_knl) { ++ pr_err("[%s]: failed to create kernel private data tracker\n", ++ __func__); ++ goto err_remove_shared_memory; ++ } ++ ++ version.version = 1; ++ ret = vc_sm_cma_vchi_client_version(sm_state->sm_handle, &version, ++ &version_result, ++ &sm_state->int_trans_id); ++ if (ret) { ++ pr_err("[%s]: Failed to send version request %d\n", __func__, ++ ret); ++ } ++ ++ /* Done! */ ++ sm_inited = 1; ++ pr_info("[%s]: installed successfully\n", __func__); ++ return; ++ ++err_remove_shared_memory: ++ debugfs_remove_recursive(sm_state->dir_root); ++err_stop_sm_service: ++ vc_sm_cma_vchi_stop(&sm_state->sm_handle); ++err_free_mem: ++ kfree(sm_state); ++ pr_info("[%s]: failed, ret %d\n", __func__, ret); ++} ++ ++/* Driver loading. */ ++static int bcm2835_vc_sm_cma_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ int err; ++ ++ pr_info("%s: Videocore shared memory driver\n", __func__); ++ ++ sm_state = kzalloc(sizeof(*sm_state), GFP_KERNEL); ++ if (!sm_state) ++ return -ENOMEM; ++ sm_state->pdev = pdev; ++ mutex_init(&sm_state->map_lock); ++ ++ dev->coherent_dma_mask = DMA_BIT_MASK(32); ++ dev->dma_mask = &dev->coherent_dma_mask; ++ err = of_dma_configure(dev, NULL, true); ++ if (err) { ++ dev_err(dev, "Unable to setup DMA: %d\n", err); ++ return err; ++ } ++ ++ vchiq_add_connected_callback(vc_sm_connected_init); ++ return 0; ++} ++ ++/* Driver unloading. */ ++static int bcm2835_vc_sm_cma_remove(struct platform_device *pdev) ++{ ++ pr_debug("[%s]: start\n", __func__); ++ if (sm_inited) { ++ /* Remove shared memory device. */ ++ misc_deregister(&sm_state->dev); ++ ++ /* Remove all proc entries. */ ++ //debugfs_remove_recursive(sm_state->dir_root); ++ ++ /* Stop the videocore shared memory service. */ ++ vc_sm_cma_vchi_stop(&sm_state->sm_handle); ++ ++ /* Free the memory for the state structure. */ ++ mutex_destroy(&sm_state->map_lock); ++ kfree(sm_state); ++ } ++ ++ pr_debug("[%s]: end\n", __func__); ++ return 0; ++} ++ ++/* Get an internal resource handle mapped from the external one. */ ++int vc_sm_cma_int_handle(int handle) ++{ ++ struct dma_buf *dma_buf = (struct dma_buf *)handle; ++ struct vc_sm_buffer *res; ++ ++ /* Validate we can work with this device. */ ++ if (!sm_state || !handle) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return 0; ++ } ++ ++ res = (struct vc_sm_buffer *)dma_buf->priv; ++ return res->vc_handle; ++} ++EXPORT_SYMBOL_GPL(vc_sm_cma_int_handle); ++ ++/* Free a previously allocated shared memory handle and block. */ ++int vc_sm_cma_free(int handle) ++{ ++ struct dma_buf *dma_buf = (struct dma_buf *)handle; ++ ++ /* Validate we can work with this device. */ ++ if (!sm_state || !handle) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ pr_debug("%s: handle %08x/dmabuf %p\n", __func__, handle, dma_buf); ++ ++ dma_buf_put(dma_buf); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(vc_sm_cma_free); ++ ++/* Import a dmabuf to be shared with VC. */ ++int vc_sm_cma_import_dmabuf(struct dma_buf *src_dmabuf, int *handle) ++{ ++ struct dma_buf *new_dma_buf; ++ struct vc_sm_buffer *res; ++ int ret; ++ ++ /* Validate we can work with this device. */ ++ if (!sm_state || !src_dmabuf || !handle) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ ret = vc_sm_cma_import_dmabuf_internal(sm_state->data_knl, src_dmabuf, ++ &new_dma_buf); ++ ++ if (!ret) { ++ pr_debug("%s: imported to ptr %p\n", __func__, new_dma_buf); ++ res = (struct vc_sm_buffer *)new_dma_buf->priv; ++ ++ /* Assign valid handle at this time.*/ ++ *handle = (int)new_dma_buf; ++ } else { ++ /* ++ * succeeded in importing the dma_buf, but then ++ * failed to look it up again. How? ++ * Release the fd again. ++ */ ++ pr_err("%s: imported vc_sm_cma_get_buffer failed %d\n", ++ __func__, ret); ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vc_sm_cma_import_dmabuf); ++ ++static struct platform_driver bcm2835_vcsm_cma_driver = { ++ .probe = bcm2835_vc_sm_cma_probe, ++ .remove = bcm2835_vc_sm_cma_remove, ++ .driver = { ++ .name = DEVICE_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++module_platform_driver(bcm2835_vcsm_cma_driver); ++ ++MODULE_AUTHOR("Dave Stevenson"); ++MODULE_DESCRIPTION("VideoCore CMA Shared Memory Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:vcsm-cma"); +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h +@@ -0,0 +1,59 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++/* ++ * VideoCore Shared Memory driver using CMA. ++ * ++ * Copyright: 2018, Raspberry Pi (Trading) Ltd ++ * ++ */ ++ ++#ifndef VC_SM_H ++#define VC_SM_H ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define VC_SM_MAX_NAME_LEN 32 ++ ++enum vc_sm_vpu_mapping_state { ++ VPU_NOT_MAPPED, ++ VPU_MAPPED, ++ VPU_UNMAPPING ++}; ++ ++struct vc_sm_buffer { ++ struct list_head global_buffer_list; /* Global list of buffers. */ ++ ++ size_t size; ++ ++ /* Lock over all the following state for this buffer */ ++ struct mutex lock; ++ struct sg_table *sg_table; ++ struct list_head attachments; ++ ++ char name[VC_SM_MAX_NAME_LEN]; ++ ++ int in_use:1; /* Kernel is still using this resource */ ++ ++ enum vc_sm_vpu_mapping_state vpu_state; ++ u32 vc_handle; /* VideoCore handle for this buffer */ ++ ++ /* DMABUF related fields */ ++ struct dma_buf *import_dma_buf; ++ struct dma_buf *dma_buf; ++ struct dma_buf_attachment *attach; ++ struct sg_table *sgt; ++ dma_addr_t dma_addr; ++ ++ struct vc_sm_privdata_t *private; ++}; ++ ++#endif +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c +@@ -0,0 +1,498 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * VideoCore Shared Memory CMA allocator ++ * ++ * Copyright: 2018, Raspberry Pi (Trading) Ltd ++ * Copyright 2011-2012 Broadcom Corporation. All rights reserved. ++ * ++ * Based on vmcs_sm driver from Broadcom Corporation. ++ * ++ */ ++ ++/* ---- Include Files ----------------------------------------------------- */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vc_sm_cma_vchi.h" ++ ++#define VC_SM_VER 1 ++#define VC_SM_MIN_VER 0 ++ ++/* ---- Private Constants and Types -------------------------------------- */ ++ ++/* Command blocks come from a pool */ ++#define SM_MAX_NUM_CMD_RSP_BLKS 32 ++ ++struct sm_cmd_rsp_blk { ++ struct list_head head; /* To create lists */ ++ /* To be signaled when the response is there */ ++ struct completion cmplt; ++ ++ u16 id; ++ u16 length; ++ ++ u8 msg[VC_SM_MAX_MSG_LEN]; ++ ++ uint32_t wait:1; ++ uint32_t sent:1; ++ uint32_t alloc:1; ++ ++}; ++ ++struct sm_instance { ++ u32 num_connections; ++ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; ++ struct task_struct *io_thread; ++ struct completion io_cmplt; ++ ++ vpu_event_cb vpu_event; ++ ++ /* Mutex over the following lists */ ++ struct mutex lock; ++ u32 trans_id; ++ struct list_head cmd_list; ++ struct list_head rsp_list; ++ struct list_head dead_list; ++ ++ struct sm_cmd_rsp_blk free_blk[SM_MAX_NUM_CMD_RSP_BLKS]; ++ ++ /* Mutex over the free_list */ ++ struct mutex free_lock; ++ struct list_head free_list; ++ ++ struct semaphore free_sema; ++ ++}; ++ ++/* ---- Private Variables ------------------------------------------------ */ ++ ++/* ---- Private Function Prototypes -------------------------------------- */ ++ ++/* ---- Private Functions ------------------------------------------------ */ ++static int ++bcm2835_vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle, ++ void *data, ++ unsigned int size) ++{ ++ return vchi_queue_kernel_message(handle, ++ data, ++ size); ++} ++ ++static struct ++sm_cmd_rsp_blk *vc_vchi_cmd_create(struct sm_instance *instance, ++ enum vc_sm_msg_type id, void *msg, ++ u32 size, int wait) ++{ ++ struct sm_cmd_rsp_blk *blk; ++ struct vc_sm_msg_hdr_t *hdr; ++ ++ if (down_interruptible(&instance->free_sema)) { ++ blk = kmalloc(sizeof(*blk), GFP_KERNEL); ++ if (!blk) ++ return NULL; ++ ++ blk->alloc = 1; ++ init_completion(&blk->cmplt); ++ } else { ++ mutex_lock(&instance->free_lock); ++ blk = ++ list_first_entry(&instance->free_list, ++ struct sm_cmd_rsp_blk, head); ++ list_del(&blk->head); ++ mutex_unlock(&instance->free_lock); ++ } ++ ++ blk->sent = 0; ++ blk->wait = wait; ++ blk->length = sizeof(*hdr) + size; ++ ++ hdr = (struct vc_sm_msg_hdr_t *)blk->msg; ++ hdr->type = id; ++ mutex_lock(&instance->lock); ++ instance->trans_id++; ++ /* ++ * Retain the top bit for identifying asynchronous events, or VPU cmds. ++ */ ++ instance->trans_id &= ~0x80000000; ++ hdr->trans_id = instance->trans_id; ++ blk->id = instance->trans_id; ++ mutex_unlock(&instance->lock); ++ ++ if (size) ++ memcpy(hdr->body, msg, size); ++ ++ return blk; ++} ++ ++static void ++vc_vchi_cmd_delete(struct sm_instance *instance, struct sm_cmd_rsp_blk *blk) ++{ ++ if (blk->alloc) { ++ kfree(blk); ++ return; ++ } ++ ++ mutex_lock(&instance->free_lock); ++ list_add(&blk->head, &instance->free_list); ++ mutex_unlock(&instance->free_lock); ++ up(&instance->free_sema); ++} ++ ++static void vc_sm_cma_vchi_rx_ack(struct sm_instance *instance, ++ struct sm_cmd_rsp_blk *cmd, ++ struct vc_sm_result_t *reply, ++ u32 reply_len) ++{ ++ mutex_lock(&instance->lock); ++ list_for_each_entry(cmd, ++ &instance->rsp_list, ++ head) { ++ if (cmd->id == reply->trans_id) ++ break; ++ } ++ mutex_unlock(&instance->lock); ++ ++ if (&cmd->head == &instance->rsp_list) { ++ //pr_debug("%s: received response %u, throw away...", ++ pr_err("%s: received response %u, throw away...", ++ __func__, ++ reply->trans_id); ++ } else if (reply_len > sizeof(cmd->msg)) { ++ pr_err("%s: reply too big (%u) %u, throw away...", ++ __func__, reply_len, ++ reply->trans_id); ++ } else { ++ memcpy(cmd->msg, reply, ++ reply_len); ++ complete(&cmd->cmplt); ++ } ++} ++ ++static int vc_sm_cma_vchi_videocore_io(void *arg) ++{ ++ struct sm_instance *instance = arg; ++ struct sm_cmd_rsp_blk *cmd = NULL, *cmd_tmp; ++ struct vc_sm_result_t *reply; ++ u32 reply_len; ++ s32 status; ++ int svc_use = 1; ++ ++ while (1) { ++ if (svc_use) ++ vchi_service_release(instance->vchi_handle[0]); ++ svc_use = 0; ++ if (!wait_for_completion_interruptible(&instance->io_cmplt)) { ++ vchi_service_use(instance->vchi_handle[0]); ++ svc_use = 1; ++ ++ do { ++ /* ++ * Get new command and move it to response list ++ */ ++ mutex_lock(&instance->lock); ++ if (list_empty(&instance->cmd_list)) { ++ /* no more commands to process */ ++ mutex_unlock(&instance->lock); ++ break; ++ } ++ cmd = ++ list_first_entry(&instance->cmd_list, ++ struct sm_cmd_rsp_blk, ++ head); ++ list_move(&cmd->head, &instance->rsp_list); ++ cmd->sent = 1; ++ mutex_unlock(&instance->lock); ++ ++ /* Send the command */ ++ status = bcm2835_vchi_msg_queue( ++ instance->vchi_handle[0], ++ cmd->msg, cmd->length); ++ if (status) { ++ pr_err("%s: failed to queue message (%d)", ++ __func__, status); ++ } ++ ++ /* If no reply is needed then we're done */ ++ if (!cmd->wait) { ++ mutex_lock(&instance->lock); ++ list_del(&cmd->head); ++ mutex_unlock(&instance->lock); ++ vc_vchi_cmd_delete(instance, cmd); ++ continue; ++ } ++ ++ if (status) { ++ complete(&cmd->cmplt); ++ continue; ++ } ++ ++ } while (1); ++ ++ while (!vchi_msg_peek(instance->vchi_handle[0], ++ (void **)&reply, &reply_len, ++ VCHI_FLAGS_NONE)) { ++ if (reply->trans_id & 0x80000000) { ++ /* Async event or cmd from the VPU */ ++ if (instance->vpu_event) ++ instance->vpu_event( ++ instance, reply, ++ reply_len); ++ } else { ++ vc_sm_cma_vchi_rx_ack(instance, cmd, ++ reply, reply_len); ++ } ++ ++ vchi_msg_remove(instance->vchi_handle[0]); ++ } ++ ++ /* Go through the dead list and free them */ ++ mutex_lock(&instance->lock); ++ list_for_each_entry_safe(cmd, cmd_tmp, ++ &instance->dead_list, head) { ++ list_del(&cmd->head); ++ vc_vchi_cmd_delete(instance, cmd); ++ } ++ mutex_unlock(&instance->lock); ++ } ++ } ++ ++ return 0; ++} ++ ++static void vc_sm_cma_vchi_callback(void *param, ++ const VCHI_CALLBACK_REASON_T reason, ++ void *msg_handle) ++{ ++ struct sm_instance *instance = param; ++ ++ (void)msg_handle; ++ ++ switch (reason) { ++ case VCHI_CALLBACK_MSG_AVAILABLE: ++ complete(&instance->io_cmplt); ++ break; ++ ++ case VCHI_CALLBACK_SERVICE_CLOSED: ++ pr_info("%s: service CLOSED!!", __func__); ++ default: ++ break; ++ } ++} ++ ++struct sm_instance *vc_sm_cma_vchi_init(VCHI_INSTANCE_T vchi_instance, ++ unsigned int num_connections, ++ vpu_event_cb vpu_event) ++{ ++ u32 i; ++ struct sm_instance *instance; ++ int status; ++ ++ pr_debug("%s: start", __func__); ++ ++ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { ++ pr_err("%s: unsupported number of connections %u (max=%u)", ++ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); ++ ++ goto err_null; ++ } ++ /* Allocate memory for this instance */ ++ instance = kzalloc(sizeof(*instance), GFP_KERNEL); ++ ++ /* Misc initialisations */ ++ mutex_init(&instance->lock); ++ init_completion(&instance->io_cmplt); ++ INIT_LIST_HEAD(&instance->cmd_list); ++ INIT_LIST_HEAD(&instance->rsp_list); ++ INIT_LIST_HEAD(&instance->dead_list); ++ INIT_LIST_HEAD(&instance->free_list); ++ sema_init(&instance->free_sema, SM_MAX_NUM_CMD_RSP_BLKS); ++ mutex_init(&instance->free_lock); ++ for (i = 0; i < SM_MAX_NUM_CMD_RSP_BLKS; i++) { ++ init_completion(&instance->free_blk[i].cmplt); ++ list_add(&instance->free_blk[i].head, &instance->free_list); ++ } ++ ++ /* Open the VCHI service connections */ ++ instance->num_connections = num_connections; ++ for (i = 0; i < num_connections; i++) { ++ SERVICE_CREATION_T params = { ++ .version = VCHI_VERSION_EX(VC_SM_VER, VC_SM_MIN_VER), ++ .service_id = VC_SM_SERVER_NAME, ++ .callback = vc_sm_cma_vchi_callback, ++ .callback_param = instance, ++ }; ++ ++ status = vchi_service_open(vchi_instance, ++ ¶ms, &instance->vchi_handle[i]); ++ if (status) { ++ pr_err("%s: failed to open VCHI service (%d)", ++ __func__, status); ++ ++ goto err_close_services; ++ } ++ } ++ ++ /* Create the thread which takes care of all io to/from videoocore. */ ++ instance->io_thread = kthread_create(&vc_sm_cma_vchi_videocore_io, ++ (void *)instance, "SMIO"); ++ if (!instance->io_thread) { ++ pr_err("%s: failed to create SMIO thread", __func__); ++ ++ goto err_close_services; ++ } ++ instance->vpu_event = vpu_event; ++ set_user_nice(instance->io_thread, -10); ++ wake_up_process(instance->io_thread); ++ ++ pr_debug("%s: success - instance 0x%x", __func__, ++ (unsigned int)instance); ++ return instance; ++ ++err_close_services: ++ for (i = 0; i < instance->num_connections; i++) { ++ if (instance->vchi_handle[i]) ++ vchi_service_close(instance->vchi_handle[i]); ++ } ++ kfree(instance); ++err_null: ++ pr_debug("%s: FAILED", __func__); ++ return NULL; ++} ++ ++int vc_sm_cma_vchi_stop(struct sm_instance **handle) ++{ ++ struct sm_instance *instance; ++ u32 i; ++ ++ if (!handle) { ++ pr_err("%s: invalid pointer to handle %p", __func__, handle); ++ goto lock; ++ } ++ ++ if (!*handle) { ++ pr_err("%s: invalid handle %p", __func__, *handle); ++ goto lock; ++ } ++ ++ instance = *handle; ++ ++ /* Close all VCHI service connections */ ++ for (i = 0; i < instance->num_connections; i++) { ++ s32 success; ++ ++ vchi_service_use(instance->vchi_handle[i]); ++ ++ success = vchi_service_close(instance->vchi_handle[i]); ++ } ++ ++ kfree(instance); ++ ++ *handle = NULL; ++ return 0; ++ ++lock: ++ return -EINVAL; ++} ++ ++static int vc_sm_cma_vchi_send_msg(struct sm_instance *handle, ++ enum vc_sm_msg_type msg_id, void *msg, ++ u32 msg_size, void *result, u32 result_size, ++ u32 *cur_trans_id, u8 wait_reply) ++{ ++ int status = 0; ++ struct sm_instance *instance = handle; ++ struct sm_cmd_rsp_blk *cmd_blk; ++ ++ if (!handle) { ++ pr_err("%s: invalid handle", __func__); ++ return -EINVAL; ++ } ++ if (!msg) { ++ pr_err("%s: invalid msg pointer", __func__); ++ return -EINVAL; ++ } ++ ++ cmd_blk = ++ vc_vchi_cmd_create(instance, msg_id, msg, msg_size, wait_reply); ++ if (!cmd_blk) { ++ pr_err("[%s]: failed to allocate global tracking resource", ++ __func__); ++ return -ENOMEM; ++ } ++ ++ if (cur_trans_id) ++ *cur_trans_id = cmd_blk->id; ++ ++ mutex_lock(&instance->lock); ++ list_add_tail(&cmd_blk->head, &instance->cmd_list); ++ mutex_unlock(&instance->lock); ++ complete(&instance->io_cmplt); ++ ++ if (!wait_reply) ++ /* We're done */ ++ return 0; ++ ++ /* Wait for the response */ ++ if (wait_for_completion_interruptible(&cmd_blk->cmplt)) { ++ mutex_lock(&instance->lock); ++ if (!cmd_blk->sent) { ++ list_del(&cmd_blk->head); ++ mutex_unlock(&instance->lock); ++ vc_vchi_cmd_delete(instance, cmd_blk); ++ return -ENXIO; ++ } ++ ++ list_move(&cmd_blk->head, &instance->dead_list); ++ mutex_unlock(&instance->lock); ++ complete(&instance->io_cmplt); ++ return -EINTR; /* We're done */ ++ } ++ ++ if (result && result_size) { ++ memcpy(result, cmd_blk->msg, result_size); ++ } else { ++ struct vc_sm_result_t *res = ++ (struct vc_sm_result_t *)cmd_blk->msg; ++ status = (res->success == 0) ? 0 : -ENXIO; ++ } ++ ++ mutex_lock(&instance->lock); ++ list_del(&cmd_blk->head); ++ mutex_unlock(&instance->lock); ++ vc_vchi_cmd_delete(instance, cmd_blk); ++ return status; ++} ++ ++int vc_sm_cma_vchi_free(struct sm_instance *handle, struct vc_sm_free_t *msg, ++ u32 *cur_trans_id) ++{ ++ return vc_sm_cma_vchi_send_msg(handle, VC_SM_MSG_TYPE_FREE, ++ msg, sizeof(*msg), 0, 0, cur_trans_id, 0); ++} ++ ++int vc_sm_cma_vchi_import(struct sm_instance *handle, struct vc_sm_import *msg, ++ struct vc_sm_import_result *result, u32 *cur_trans_id) ++{ ++ return vc_sm_cma_vchi_send_msg(handle, VC_SM_MSG_TYPE_IMPORT, ++ msg, sizeof(*msg), result, sizeof(*result), ++ cur_trans_id, 1); ++} ++ ++int vc_sm_cma_vchi_client_version(struct sm_instance *handle, ++ struct vc_sm_version *msg, ++ struct vc_sm_result_t *result, ++ u32 *cur_trans_id) ++{ ++ return vc_sm_cma_vchi_send_msg(handle, VC_SM_MSG_TYPE_CLIENT_VERSION, ++ //msg, sizeof(*msg), result, sizeof(*result), ++ //cur_trans_id, 1); ++ msg, sizeof(*msg), NULL, 0, ++ cur_trans_id, 0); ++} +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.h +@@ -0,0 +1,59 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++/* ++ * VideoCore Shared Memory CMA allocator ++ * ++ * Copyright: 2018, Raspberry Pi (Trading) Ltd ++ * Copyright 2011-2012 Broadcom Corporation. All rights reserved. ++ * ++ * Based on vmcs_sm driver from Broadcom Corporation. ++ * ++ */ ++ ++#ifndef __VC_SM_CMA_VCHI_H__INCLUDED__ ++#define __VC_SM_CMA_VCHI_H__INCLUDED__ ++ ++#include "interface/vchi/vchi.h" ++ ++#include "vc_sm_defs.h" ++ ++/* ++ * Forward declare. ++ */ ++struct sm_instance; ++ ++typedef void (*vpu_event_cb)(struct sm_instance *instance, ++ struct vc_sm_result_t *reply, int reply_len); ++ ++/* ++ * Initialize the shared memory service, opens up vchi connection to talk to it. ++ */ ++struct sm_instance *vc_sm_cma_vchi_init(VCHI_INSTANCE_T vchi_instance, ++ unsigned int num_connections, ++ vpu_event_cb vpu_event); ++ ++/* ++ * Terminates the shared memory service. ++ */ ++int vc_sm_cma_vchi_stop(struct sm_instance **handle); ++ ++/* ++ * Ask the shared memory service to free up some memory that was previously ++ * allocated by the vc_sm_cma_vchi_alloc function call. ++ */ ++int vc_sm_cma_vchi_free(struct sm_instance *handle, struct vc_sm_free_t *msg, ++ u32 *cur_trans_id); ++ ++/* ++ * Import a contiguous block of memory and wrap it in a GPU MEM_HANDLE_T. ++ */ ++int vc_sm_cma_vchi_import(struct sm_instance *handle, struct vc_sm_import *msg, ++ struct vc_sm_import_result *result, ++ u32 *cur_trans_id); ++ ++int vc_sm_cma_vchi_client_version(struct sm_instance *handle, ++ struct vc_sm_version *msg, ++ struct vc_sm_result_t *result, ++ u32 *cur_trans_id); ++ ++#endif /* __VC_SM_CMA_VCHI_H__INCLUDED__ */ +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_defs.h +@@ -0,0 +1,298 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++/* ++ * VideoCore Shared Memory CMA allocator ++ * ++ * Copyright: 2018, Raspberry Pi (Trading) Ltd ++ * ++ * Based on vc_sm_defs.h from the vmcs_sm driver Copyright Broadcom Corporation. ++ * All IPC messages are copied across to this file, even if the vc-sm-cma ++ * driver is not currently using them. ++ * ++ **************************************************************************** ++ */ ++ ++#ifndef __VC_SM_DEFS_H__INCLUDED__ ++#define __VC_SM_DEFS_H__INCLUDED__ ++ ++/* FourCC code used for VCHI connection */ ++#define VC_SM_SERVER_NAME MAKE_FOURCC("SMEM") ++ ++/* Maximum message length */ ++#define VC_SM_MAX_MSG_LEN (sizeof(union vc_sm_msg_union_t) + \ ++ sizeof(struct vc_sm_msg_hdr_t)) ++#define VC_SM_MAX_RSP_LEN (sizeof(union vc_sm_msg_union_t)) ++ ++/* Resource name maximum size */ ++#define VC_SM_RESOURCE_NAME 32 ++ ++/* ++ * Version to be reported to the VPU ++ * VPU assumes 0 (aka 1) which does not require the released callback, nor ++ * expect the client to handle VC_MEM_REQUESTS. ++ * Version 2 requires the released callback, and must support VC_MEM_REQUESTS. ++ */ ++#define VC_SM_PROTOCOL_VERSION 2 ++ ++enum vc_sm_msg_type { ++ /* Message types supported for HOST->VC direction */ ++ ++ /* Allocate shared memory block */ ++ VC_SM_MSG_TYPE_ALLOC, ++ /* Lock allocated shared memory block */ ++ VC_SM_MSG_TYPE_LOCK, ++ /* Unlock allocated shared memory block */ ++ VC_SM_MSG_TYPE_UNLOCK, ++ /* Unlock allocated shared memory block, do not answer command */ ++ VC_SM_MSG_TYPE_UNLOCK_NOANS, ++ /* Free shared memory block */ ++ VC_SM_MSG_TYPE_FREE, ++ /* Resize a shared memory block */ ++ VC_SM_MSG_TYPE_RESIZE, ++ /* Walk the allocated shared memory block(s) */ ++ VC_SM_MSG_TYPE_WALK_ALLOC, ++ ++ /* A previously applied action will need to be reverted */ ++ VC_SM_MSG_TYPE_ACTION_CLEAN, ++ ++ /* ++ * Import a physical address and wrap into a MEM_HANDLE_T. ++ * Release with VC_SM_MSG_TYPE_FREE. ++ */ ++ VC_SM_MSG_TYPE_IMPORT, ++ /* ++ *Tells VC the protocol version supported by this client. ++ * 2 supports the async/cmd messages from the VPU for final release ++ * of memory, and for VC allocations. ++ */ ++ VC_SM_MSG_TYPE_CLIENT_VERSION, ++ /* Response to VC request for memory */ ++ VC_SM_MSG_TYPE_VC_MEM_REQUEST_REPLY, ++ ++ /* ++ * Asynchronous/cmd messages supported for VC->HOST direction. ++ * Signalled by setting the top bit in vc_sm_result_t trans_id. ++ */ ++ ++ /* ++ * VC has finished with an imported memory allocation. ++ * Release any Linux reference counts on the underlying block. ++ */ ++ VC_SM_MSG_TYPE_RELEASED, ++ /* VC request for memory */ ++ VC_SM_MSG_TYPE_VC_MEM_REQUEST, ++ ++ VC_SM_MSG_TYPE_MAX ++}; ++ ++/* Type of memory to be allocated */ ++enum vc_sm_alloc_type_t { ++ VC_SM_ALLOC_CACHED, ++ VC_SM_ALLOC_NON_CACHED, ++}; ++ ++/* Message header for all messages in HOST->VC direction */ ++struct vc_sm_msg_hdr_t { ++ u32 type; ++ u32 trans_id; ++ u8 body[0]; ++ ++}; ++ ++/* Request to allocate memory (HOST->VC) */ ++struct vc_sm_alloc_t { ++ /* type of memory to allocate */ ++ enum vc_sm_alloc_type_t type; ++ /* byte amount of data to allocate per unit */ ++ u32 base_unit; ++ /* number of unit to allocate */ ++ u32 num_unit; ++ /* alignment to be applied on allocation */ ++ u32 alignment; ++ /* identity of who allocated this block */ ++ u32 allocator; ++ /* resource name (for easier tracking on vc side) */ ++ char name[VC_SM_RESOURCE_NAME]; ++ ++}; ++ ++/* Result of a requested memory allocation (VC->HOST) */ ++struct vc_sm_alloc_result_t { ++ /* Transaction identifier */ ++ u32 trans_id; ++ ++ /* Resource handle */ ++ u32 res_handle; ++ /* Pointer to resource buffer */ ++ u32 res_mem; ++ /* Resource base size (bytes) */ ++ u32 res_base_size; ++ /* Resource number */ ++ u32 res_num; ++ ++}; ++ ++/* Request to free a previously allocated memory (HOST->VC) */ ++struct vc_sm_free_t { ++ /* Resource handle (returned from alloc) */ ++ u32 res_handle; ++ /* Resource buffer (returned from alloc) */ ++ u32 res_mem; ++ ++}; ++ ++/* Request to lock a previously allocated memory (HOST->VC) */ ++struct vc_sm_lock_unlock_t { ++ /* Resource handle (returned from alloc) */ ++ u32 res_handle; ++ /* Resource buffer (returned from alloc) */ ++ u32 res_mem; ++ ++}; ++ ++/* Request to resize a previously allocated memory (HOST->VC) */ ++struct vc_sm_resize_t { ++ /* Resource handle (returned from alloc) */ ++ u32 res_handle; ++ /* Resource buffer (returned from alloc) */ ++ u32 res_mem; ++ /* Resource *new* size requested (bytes) */ ++ u32 res_new_size; ++ ++}; ++ ++/* Result of a requested memory lock (VC->HOST) */ ++struct vc_sm_lock_result_t { ++ /* Transaction identifier */ ++ u32 trans_id; ++ ++ /* Resource handle */ ++ u32 res_handle; ++ /* Pointer to resource buffer */ ++ u32 res_mem; ++ /* ++ * Pointer to former resource buffer if the memory ++ * was reallocated ++ */ ++ u32 res_old_mem; ++ ++}; ++ ++/* Generic result for a request (VC->HOST) */ ++struct vc_sm_result_t { ++ /* Transaction identifier */ ++ u32 trans_id; ++ ++ s32 success; ++ ++}; ++ ++/* Request to revert a previously applied action (HOST->VC) */ ++struct vc_sm_action_clean_t { ++ /* Action of interest */ ++ enum vc_sm_msg_type res_action; ++ /* Transaction identifier for the action of interest */ ++ u32 action_trans_id; ++ ++}; ++ ++/* Request to remove all data associated with a given allocator (HOST->VC) */ ++struct vc_sm_free_all_t { ++ /* Allocator identifier */ ++ u32 allocator; ++}; ++ ++/* Request to import memory (HOST->VC) */ ++struct vc_sm_import { ++ /* type of memory to allocate */ ++ enum vc_sm_alloc_type_t type; ++ /* pointer to the VC (ie physical) address of the allocated memory */ ++ u32 addr; ++ /* size of buffer */ ++ u32 size; ++ /* opaque handle returned in RELEASED messages */ ++ u32 kernel_id; ++ /* Allocator identifier */ ++ u32 allocator; ++ /* resource name (for easier tracking on vc side) */ ++ char name[VC_SM_RESOURCE_NAME]; ++}; ++ ++/* Result of a requested memory import (VC->HOST) */ ++struct vc_sm_import_result { ++ /* Transaction identifier */ ++ u32 trans_id; ++ ++ /* Resource handle */ ++ u32 res_handle; ++}; ++ ++/* Notification that VC has finished with an allocation (VC->HOST) */ ++struct vc_sm_released { ++ /* cmd type / trans_id */ ++ u32 cmd; ++ ++ /* pointer to the VC (ie physical) address of the allocated memory */ ++ u32 addr; ++ /* size of buffer */ ++ u32 size; ++ /* opaque handle returned in RELEASED messages */ ++ u32 kernel_id; ++ u32 vc_handle; ++}; ++ ++/* ++ * Client informing VC as to the protocol version it supports. ++ * >=2 requires the released callback, and supports VC asking for memory. ++ * Failure means that the firmware doesn't support this call, and therefore the ++ * client should either fail, or NOT rely on getting the released callback. ++ */ ++struct vc_sm_version { ++ u32 version; ++}; ++ ++/* Request FROM VideoCore for some memory */ ++struct vc_sm_vc_mem_request { ++ /* cmd type */ ++ u32 cmd; ++ ++ /* trans_id (from VPU) */ ++ u32 trans_id; ++ /* size of buffer */ ++ u32 size; ++ /* alignment of buffer */ ++ u32 align; ++ /* resource name (for easier tracking) */ ++ char name[VC_SM_RESOURCE_NAME]; ++}; ++ ++/* Response from the kernel to provide the VPU with some memory */ ++struct vc_sm_vc_mem_request_result { ++ /* Transaction identifier for the VPU */ ++ u32 trans_id; ++ /* pointer to the physical address of the allocated memory */ ++ u32 addr; ++ /* opaque handle returned in RELEASED messages */ ++ u32 kernel_id; ++}; ++ ++/* Union of ALL messages */ ++union vc_sm_msg_union_t { ++ struct vc_sm_alloc_t alloc; ++ struct vc_sm_alloc_result_t alloc_result; ++ struct vc_sm_free_t free; ++ struct vc_sm_lock_unlock_t lock_unlock; ++ struct vc_sm_action_clean_t action_clean; ++ struct vc_sm_resize_t resize; ++ struct vc_sm_lock_result_t lock_result; ++ struct vc_sm_result_t result; ++ struct vc_sm_free_all_t free_all; ++ struct vc_sm_import import; ++ struct vc_sm_import_result import_result; ++ struct vc_sm_version version; ++ struct vc_sm_released released; ++ struct vc_sm_vc_mem_request vc_request; ++ struct vc_sm_vc_mem_request_result vc_request_result; ++}; ++ ++#endif /* __VC_SM_DEFS_H__INCLUDED__ */ +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h +@@ -0,0 +1,28 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++/* ++ * VideoCore Shared Memory CMA allocator ++ * ++ * Copyright: 2018, Raspberry Pi (Trading) Ltd ++ * ++ * Based on vc_sm_defs.h from the vmcs_sm driver Copyright Broadcom Corporation. ++ * ++ */ ++ ++#ifndef __VC_SM_KNL_H__INCLUDED__ ++#define __VC_SM_KNL_H__INCLUDED__ ++ ++#if !defined(__KERNEL__) ++#error "This interface is for kernel use only..." ++#endif ++ ++/* Free a previously allocated or imported shared memory handle and block. */ ++int vc_sm_cma_free(int handle); ++ ++/* Get an internal resource handle mapped from the external one. */ ++int vc_sm_cma_int_handle(int handle); ++ ++/* Import a block of memory into the GPU space. */ ++int vc_sm_cma_import_dmabuf(struct dma_buf *dmabuf, int *handle); ++ ++#endif /* __VC_SM_KNL_H__INCLUDED__ */ diff --git a/target/linux/brcm2708/patches-4.19/950-0252-staging-bcm2835-camera-Set-sequence-number-correctly.patch b/target/linux/brcm2708/patches-4.19/950-0252-staging-bcm2835-camera-Set-sequence-number-correctly.patch deleted file mode 100644 index 7bffc3cd65..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0252-staging-bcm2835-camera-Set-sequence-number-correctly.patch +++ /dev/null @@ -1,46 +0,0 @@ -From ba37d62e7bbdf42c2fa9ac3655354992da199a4b Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 21 Jun 2018 17:02:14 +0100 -Subject: [PATCH 252/806] staging: bcm2835-camera: Set sequence number - correctly - -Set the sequence number in vb2_v4l2_buffer mainly so the -latest v4l2-ctl reports the frame rate correctly. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 4 ++++ - drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h | 2 ++ - 2 files changed, 6 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -409,6 +409,7 @@ static void buffer_cb(struct vchiq_mmal_ - } - } - dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; -+ buf->vb.sequence = dev->capture.sequence++; - - vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); - if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) -@@ -537,6 +538,9 @@ static int start_streaming(struct vb2_qu - /* enable frame capture */ - dev->capture.frame_count = 1; - -+ /* reset sequence number */ -+ dev->capture.sequence = 0; -+ - /* if the preview is not already running, wait for a few frames for AGC - * to settle down. - */ ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.h -@@ -93,6 +93,8 @@ struct bm2835_mmal_dev { - ktime_t kernel_start_ts; - /* Timestamp of last frame */ - u64 last_timestamp; -+ /* Sequence number of last buffer */ -+ u32 sequence; - - struct vchiq_mmal_port *port; /* port being used for capture */ - /* camera port being used for capture */ diff --git a/target/linux/brcm2708/patches-4.19/950-0252-staging-vc-sm-cma-Fixup-driver-for-older-VCHI-APIs.patch b/target/linux/brcm2708/patches-4.19/950-0252-staging-vc-sm-cma-Fixup-driver-for-older-VCHI-APIs.patch new file mode 100644 index 0000000000..4f16e0bfda --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0252-staging-vc-sm-cma-Fixup-driver-for-older-VCHI-APIs.patch @@ -0,0 +1,42 @@ +From 9eb40722f3ef0d338ed97667a7391f3d74812332 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 30 Oct 2018 11:42:48 +0000 +Subject: [PATCH] staging: vc-sm-cma: Fixup driver for older VCHI APIs + +Original patch was based off staging which included some cleanups +of the VCHI APIs. Those aren't present here, so switch back to +the older API. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 2 +- + drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 5 +++++ + 2 files changed, 6 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -632,7 +632,7 @@ static void vc_sm_connected_init(void) + goto err_free_mem; + } + +- ret = vchi_connect(vchi_instance); ++ ret = vchi_connect(NULL, 0, vchi_instance); + if (ret) { + pr_err("[%s]: failed to connect VCHI instance (ret=%d)\n", + __func__, ret); +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c +@@ -325,8 +325,13 @@ struct sm_instance *vc_sm_cma_vchi_init( + SERVICE_CREATION_T params = { + .version = VCHI_VERSION_EX(VC_SM_VER, VC_SM_MIN_VER), + .service_id = VC_SM_SERVER_NAME, ++ .rx_fifo_size = 0, ++ .tx_fifo_size = 0, + .callback = vc_sm_cma_vchi_callback, + .callback_param = instance, ++ .want_unaligned_bulk_rx = 0, ++ .want_unaligned_bulk_tx = 0, ++ .want_crc = 0 + }; + + status = vchi_service_open(vchi_instance, diff --git a/target/linux/brcm2708/patches-4.19/950-0253-staging-bcm2835-camera-Ensure-timestamps-never-go-ba.patch b/target/linux/brcm2708/patches-4.19/950-0253-staging-bcm2835-camera-Ensure-timestamps-never-go-ba.patch deleted file mode 100644 index 90433b732d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0253-staging-bcm2835-camera-Ensure-timestamps-never-go-ba.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 0d0b7a58ab065f72ffa55fbc7ab5436628694919 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 24 Jul 2018 12:08:29 +0100 -Subject: [PATCH 253/806] staging: bcm2835-camera: Ensure timestamps never go - backwards. - -There is an awkward situation with H264 header bytes. Currently -they are returned with a PTS of 0 because they aren't associated -with a timestamped frame to encode. These are handled by either -returning the timestamp of the last buffer to have been received, -or in the case of the first buffer the timestamp taken at -start_streaming. -This results in a race where the current frame may have started -before we take the start time, which results in the first encoded -frame having an earlier timestamp than the header bytes. - -Ensure that we never return a negative delta to the user by checking -against the previous timestamp. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -393,6 +393,11 @@ static void buffer_cb(struct vchiq_mmal_ - ktime_to_ns(dev->capture.kernel_start_ts), - dev->capture.vc_start_timestamp, pts, - ktime_to_ns(timestamp)); -+ if (timestamp < dev->capture.last_timestamp) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Negative delta - using last time\n"); -+ timestamp = dev->capture.last_timestamp; -+ } - buf->vb.vb2_buf.timestamp = ktime_to_ns(timestamp); - } else { - if (dev->capture.last_timestamp) { diff --git a/target/linux/brcm2708/patches-4.19/950-0253-staging-vc04_services-Use-vc-sm-cma-to-support-zero-.patch b/target/linux/brcm2708/patches-4.19/950-0253-staging-vc04_services-Use-vc-sm-cma-to-support-zero-.patch new file mode 100644 index 0000000000..8c69f65cc2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0253-staging-vc04_services-Use-vc-sm-cma-to-support-zero-.patch @@ -0,0 +1,163 @@ +From bcb0dccc1f02ed3dd01834ca0e35c4043df8988e Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 25 Sep 2018 16:07:55 +0100 +Subject: [PATCH] staging: vc04_services: Use vc-sm-cma to support zero + copy + +With the vc-sm-cma driver we can support zero copy of buffers between +the kernel and VPU. Add this support to vchiq-mmal. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/vchiq-mmal/Kconfig | 1 + + .../vc04_services/vchiq-mmal/mmal-common.h | 4 ++ + .../vc04_services/vchiq-mmal/mmal-vchiq.c | 66 ++++++++++++++++++- + .../vc04_services/vchiq-mmal/mmal-vchiq.h | 1 + + 4 files changed, 70 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/Kconfig ++++ b/drivers/staging/vc04_services/vchiq-mmal/Kconfig +@@ -2,6 +2,7 @@ config BCM2835_VCHIQ_MMAL + tristate "BCM2835 MMAL VCHIQ service" + depends on (ARCH_BCM2835 || COMPILE_TEST) + select BCM2835_VCHIQ ++ select BCM_VC_SM_CMA + help + Enables the MMAL API over VCHIQ as used for the + majority of the multimedia services on VideoCore. +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h +@@ -51,6 +51,10 @@ struct mmal_buffer { + + struct mmal_msg_context *msg_context; + ++ struct dma_buf *dma_buf;/* Exported dmabuf fd from videobuf2 */ ++ int vcsm_handle; /* VCSM handle having imported the dmabuf */ ++ u32 vc_handle; /* VC handle to that dmabuf */ ++ + u32 cmd; /* MMAL command. 0=data. */ + unsigned long length; + u32 mmal_flags; +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -27,9 +27,12 @@ + #include + + #include "mmal-common.h" ++#include "mmal-parameters.h" + #include "mmal-vchiq.h" + #include "mmal-msg.h" + ++#include "vc-sm-cma/vc_sm_knl.h" ++ + #define USE_VCHIQ_ARM + #include "interface/vchi/vchi.h" + +@@ -425,8 +428,13 @@ buffer_from_host(struct vchiq_mmal_insta + + /* buffer header */ + m.u.buffer_from_host.buffer_header.cmd = 0; +- m.u.buffer_from_host.buffer_header.data = +- (u32)(unsigned long)buf->buffer; ++ if (port->zero_copy) { ++ m.u.buffer_from_host.buffer_header.data = buf->vc_handle; ++ } else { ++ m.u.buffer_from_host.buffer_header.data = ++ (u32)(unsigned long)buf->buffer; ++ } ++ + m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; + if (port->type == MMAL_PORT_TYPE_OUTPUT) { + m.u.buffer_from_host.buffer_header.length = 0; +@@ -591,6 +599,22 @@ static void buffer_to_host_cb(struct vch + + msg_context->u.bulk.status = msg->h.status; + ++ } else if (msg->u.buffer_from_host.is_zero_copy) { ++ /* ++ * Zero copy buffer, so nothing to do. ++ * Copy buffer info and make callback. ++ */ ++ msg_context->u.bulk.buffer_used = ++ msg->u.buffer_from_host.buffer_header.length; ++ msg_context->u.bulk.mmal_flags = ++ msg->u.buffer_from_host.buffer_header.flags; ++ msg_context->u.bulk.dts = ++ msg->u.buffer_from_host.buffer_header.dts; ++ msg_context->u.bulk.pts = ++ msg->u.buffer_from_host.buffer_header.pts; ++ msg_context->u.bulk.cmd = ++ msg->u.buffer_from_host.buffer_header.cmd; ++ + } else if (msg->u.buffer_from_host.buffer_header.length == 0) { + /* empty buffer */ + if (msg->u.buffer_from_host.buffer_header.flags & +@@ -1538,6 +1562,9 @@ int vchiq_mmal_port_parameter_set(struct + + mutex_unlock(&instance->vchiq_mutex); + ++ if (parameter == MMAL_PARAMETER_ZERO_COPY && !ret) ++ port->zero_copy = !!(*(bool *)value); ++ + return ret; + } + EXPORT_SYMBOL_GPL(vchiq_mmal_port_parameter_set); +@@ -1706,6 +1733,31 @@ int vchiq_mmal_submit_buffer(struct vchi + unsigned long flags = 0; + int ret; + ++ /* ++ * We really want to do this in mmal_vchi_buffer_init but can't as ++ * videobuf2 won't let us have the dmabuf there. ++ */ ++ if (port->zero_copy && buffer->dma_buf && !buffer->vcsm_handle) { ++ pr_debug("%s: import dmabuf %p\n", __func__, buffer->dma_buf); ++ ret = vc_sm_cma_import_dmabuf(buffer->dma_buf, ++ &buffer->vcsm_handle); ++ if (ret) { ++ pr_err("%s: vc_sm_import_dmabuf_fd failed, ret %d\n", ++ __func__, ret); ++ return ret; ++ } ++ ++ buffer->vc_handle = vc_sm_cma_int_handle(buffer->vcsm_handle); ++ if (!buffer->vc_handle) { ++ pr_err("%s: vc_sm_int_handle failed %d\n", ++ __func__, ret); ++ vc_sm_cma_free(buffer->vcsm_handle); ++ return ret; ++ } ++ pr_debug("%s: import dmabuf %p - got vc handle %08X\n", ++ __func__, buffer->dma_buf, buffer->vc_handle); ++ } ++ + ret = buffer_from_host(instance, port, buffer); + if (ret == -EINVAL) { + /* Port is disabled. Queue for when it is enabled. */ +@@ -1739,6 +1791,16 @@ int mmal_vchi_buffer_cleanup(struct mmal + release_msg_context(msg_context); + buf->msg_context = NULL; + ++ if (buf->vcsm_handle) { ++ int ret; ++ ++ pr_debug("%s: vc_sm_cma_free on handle %08X\n", __func__, ++ buf->vcsm_handle); ++ ret = vc_sm_cma_free(buf->vcsm_handle); ++ if (ret) ++ pr_err("%s: vcsm_free failed, ret %d\n", __func__, ret); ++ buf->vcsm_handle = 0; ++ } + return 0; + } + EXPORT_SYMBOL_GPL(mmal_vchi_buffer_cleanup); +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h +@@ -49,6 +49,7 @@ typedef void (*vchiq_mmal_buffer_cb)( + + struct vchiq_mmal_port { + u32 enabled:1; ++ u32 zero_copy:1; + u32 handle; + u32 type; /* port type, cached to use on port info set */ + u32 index; /* port index, cached to use on port info set */ diff --git a/target/linux/brcm2708/patches-4.19/950-0254-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch b/target/linux/brcm2708/patches-4.19/950-0254-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch new file mode 100644 index 0000000000..fbaa3c2d40 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0254-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch @@ -0,0 +1,83 @@ +From 0b2a62596d0e6efe17bb87a3a5ebd91cee60c64b Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 29 Oct 2018 17:57:45 +0000 +Subject: [PATCH] media: videobuf2: Allow exporting of a struct dmabuf + +videobuf2 only allowed exporting a dmabuf as a file descriptor, +but there are instances where having the struct dma_buf is +useful within the kernel. + +Split the current implementation into two, one step which +exports a struct dma_buf, and the second which converts that +into an fd. + +Signed-off-by: Dave Stevenson +--- + .../media/common/videobuf2/videobuf2-core.c | 21 ++++++++++++++++--- + include/media/videobuf2-core.h | 15 +++++++++++++ + 2 files changed, 33 insertions(+), 3 deletions(-) + +--- a/drivers/media/common/videobuf2/videobuf2-core.c ++++ b/drivers/media/common/videobuf2/videobuf2-core.c +@@ -1851,12 +1851,12 @@ static int __find_plane_by_offset(struct + return -EINVAL; + } + +-int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type, +- unsigned int index, unsigned int plane, unsigned int flags) ++int vb2_core_expbuf_dmabuf(struct vb2_queue *q, unsigned int type, ++ unsigned int index, unsigned int plane, ++ unsigned int flags, struct dma_buf **dmabuf) + { + struct vb2_buffer *vb = NULL; + struct vb2_plane *vb_plane; +- int ret; + struct dma_buf *dbuf; + + if (q->memory != VB2_MEMORY_MMAP) { +@@ -1906,6 +1906,21 @@ int vb2_core_expbuf(struct vb2_queue *q, + return -EINVAL; + } + ++ *dmabuf = dbuf; ++ return 0; ++} ++EXPORT_SYMBOL_GPL(vb2_core_expbuf_dmabuf); ++ ++int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type, ++ unsigned int index, unsigned int plane, unsigned int flags) ++{ ++ struct dma_buf *dbuf; ++ int ret; ++ ++ ret = vb2_core_expbuf_dmabuf(q, type, index, plane, flags, &dbuf); ++ if (ret) ++ return ret; ++ + ret = dma_buf_fd(dbuf, flags & ~O_ACCMODE); + if (ret < 0) { + dprintk(3, "buffer %d, plane %d failed to export (%d)\n", +--- a/include/media/videobuf2-core.h ++++ b/include/media/videobuf2-core.h +@@ -825,6 +825,21 @@ int vb2_core_streamon(struct vb2_queue * + int vb2_core_streamoff(struct vb2_queue *q, unsigned int type); + + /** ++ * vb2_core_expbuf_dmabuf() - Export a buffer as a dma_buf structure ++ * @q: videobuf2 queue ++ * @type: buffer type ++ * @index: id number of the buffer ++ * @plane: index of the plane to be exported, 0 for single plane queues ++ * @flags: flags for newly created file, currently only O_CLOEXEC is ++ * supported, refer to manual of open syscall for more details ++ * @dmabuf: Returns the dmabuf pointer ++ * ++ */ ++int vb2_core_expbuf_dmabuf(struct vb2_queue *q, unsigned int type, ++ unsigned int index, unsigned int plane, ++ unsigned int flags, struct dma_buf **dmabuf); ++ ++/** + * vb2_core_expbuf() - Export a buffer as a file descriptor. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @fd: pointer to the file descriptor associated with DMABUF diff --git a/target/linux/brcm2708/patches-4.19/950-0254-staging-bcm2835-camera-Avoid-unneeded-internal-decla.patch b/target/linux/brcm2708/patches-4.19/950-0254-staging-bcm2835-camera-Avoid-unneeded-internal-decla.patch deleted file mode 100644 index 1a83c3d128..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0254-staging-bcm2835-camera-Avoid-unneeded-internal-decla.patch +++ /dev/null @@ -1,41 +0,0 @@ -From f658f48d662c5ecd84af235f47cc48636b9a55e2 Mon Sep 17 00:00:00 2001 -From: Nathan Chancellor -Date: Thu, 27 Sep 2018 17:50:39 -0700 -Subject: [PATCH 254/806] staging: bcm2835-camera: Avoid unneeded internal - declaration warning - -Clang warns: - -drivers/staging/vc04_services/bcm2835-camera/controls.c:59:18: warning: -variable 'mains_freq_qmenu' is not needed and will not be emitted -[-Wunneeded-internal-declaration] -static const s64 mains_freq_qmenu[] = { - ^ -1 warning generated. - -This is because mains_freq_qmenu is currently only used in an ARRAY_SIZE -macro, which is a compile time evaluation in this case. Avoid this by -adding mains_freq_qmenu as the imenu member of this structure, which -matches all other controls that uses the ARRAY_SIZE macro in v4l2_ctrls. -This turns out to be a no-op because V4L2_CID_MPEG_VIDEO_BITRATE_MODE is -defined as a MMAL_CONTROL_TYPE_STD_MENU, which does not pass the imenu -definition along to v4l2_ctrl_new in bm2835_mmal_init_controls. - -Link: https://github.com/ClangBuiltLinux/linux/issues/122 -Signed-off-by: Nathan Chancellor -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-camera/controls.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -1109,7 +1109,7 @@ static const struct bm2835_mmal_v4l2_ctr - { - V4L2_CID_POWER_LINE_FREQUENCY, MMAL_CONTROL_TYPE_STD_MENU, - 0, ARRAY_SIZE(mains_freq_qmenu) - 1, -- 1, 1, NULL, -+ 1, 1, mains_freq_qmenu, - MMAL_PARAMETER_FLICKER_AVOID, - &ctrl_set_flicker_avoidance, - false diff --git a/target/linux/brcm2708/patches-4.19/950-0255-staging-bcm2835-camera-Add-multiple-inclusion-protec.patch b/target/linux/brcm2708/patches-4.19/950-0255-staging-bcm2835-camera-Add-multiple-inclusion-protec.patch deleted file mode 100644 index 7af89b14ca..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0255-staging-bcm2835-camera-Add-multiple-inclusion-protec.patch +++ /dev/null @@ -1,48 +0,0 @@ -From c37e8c9137e4858ed86e211f3fddbb9d9af08532 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 24 Sep 2018 16:21:06 +0100 -Subject: [PATCH 255/806] staging: bcm2835-camera: Add multiple inclusion - protection to headers - -mmal-common.h and mmal-msg.h didn't have the normal -ifndef FOO / define FOO / endif protection to stop it being -included multiple times. Add it. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/bcm2835-camera/mmal-common.h | 3 +++ - drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h | 3 +++ - 2 files changed, 6 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h -@@ -13,6 +13,8 @@ - * MMAL structures - * - */ -+#ifndef MMAL_COMMON_H -+#define MMAL_COMMON_H - - #define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) - #define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l') -@@ -56,3 +58,4 @@ struct mmal_colourfx { - u32 u; - u32 v; - }; -+#endif ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h -@@ -23,6 +23,8 @@ - * implementation uses fixed size types and not the enums (though the - * comments have the actual enum type - */ -+#ifndef MMAL_MSG_H -+#define MMAL_MSG_H - - #define VC_MMAL_VER 15 - #define VC_MMAL_MIN_VER 10 -@@ -401,3 +403,4 @@ struct mmal_msg { - u8 payload[MMAL_MSG_MAX_PAYLOAD]; - } u; - }; -+#endif diff --git a/target/linux/brcm2708/patches-4.19/950-0255-staging-vc04_services-Add-a-V4L2-M2M-codec-driver.patch b/target/linux/brcm2708/patches-4.19/950-0255-staging-vc04_services-Add-a-V4L2-M2M-codec-driver.patch new file mode 100644 index 0000000000..0a6552b7fd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0255-staging-vc04_services-Add-a-V4L2-M2M-codec-driver.patch @@ -0,0 +1,2467 @@ +From 2758fab4321519446fe5444769b6257dd18e794b Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 25 Sep 2018 14:53:49 +0100 +Subject: [PATCH] staging: vc04_services: Add a V4L2 M2M codec driver + +This adds a V4L2 memory to memory device that wraps the MMAL +video decode and video_encode components for H264 and MJPEG encode +and decode, MPEG4, H263, and VP8 decode (and MPEG2 decode +if the appropriate licence has been purchased). + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/Kconfig | 1 + + drivers/staging/vc04_services/Makefile | 9 +- + .../vc04_services/bcm2835-codec/Kconfig | 11 + + .../vc04_services/bcm2835-codec/Makefile | 8 + + .../staging/vc04_services/bcm2835-codec/TODO | 24 + + .../bcm2835-codec/bcm2835-v4l2-codec.c | 2359 +++++++++++++++++ + 6 files changed, 2408 insertions(+), 4 deletions(-) + create mode 100644 drivers/staging/vc04_services/bcm2835-codec/Kconfig + create mode 100644 drivers/staging/vc04_services/bcm2835-codec/Makefile + create mode 100644 drivers/staging/vc04_services/bcm2835-codec/TODO + create mode 100644 drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c + +--- a/drivers/staging/vc04_services/Kconfig ++++ b/drivers/staging/vc04_services/Kconfig +@@ -23,6 +23,7 @@ source "drivers/staging/vc04_services/bc + source "drivers/staging/vc04_services/bcm2835-camera/Kconfig" + source "drivers/staging/vc04_services/vchiq-mmal/Kconfig" + source "drivers/staging/vc04_services/vc-sm-cma/Kconfig" ++source "drivers/staging/vc04_services/bcm2835-codec/Kconfig" + + endif + +--- a/drivers/staging/vc04_services/Makefile ++++ b/drivers/staging/vc04_services/Makefile +@@ -10,10 +10,11 @@ vchiq-objs := \ + interface/vchiq_arm/vchiq_util.o \ + interface/vchiq_arm/vchiq_connected.o \ + +-obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/ +-obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-camera/ +-obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += vchiq-mmal/ +-obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma/ ++obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/ ++obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-camera/ ++obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += vchiq-mmal/ ++obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma/ ++obj-$(CONFIG_VIDEO_CODEC_BCM2835) += bcm2835-codec/ + + ccflags-y += -Idrivers/staging/vc04_services -D__VCCOREVER__=0x04000000 + +--- /dev/null ++++ b/drivers/staging/vc04_services/bcm2835-codec/Kconfig +@@ -0,0 +1,11 @@ ++config VIDEO_CODEC_BCM2835 ++ tristate "BCM2835 Video codec support" ++ depends on MEDIA_SUPPORT ++ depends on VIDEO_V4L2 && (ARCH_BCM2835 || COMPILE_TEST) ++ select BCM2835_VCHIQ_MMAL ++ select VIDEOBUF2_DMA_CONTIG ++ select V4L2_MEM2MEM_DEV ++ help ++ Say Y here to enable the V4L2 video codecs for ++ Broadcom BCM2835 SoC. This operates over the VCHIQ interface ++ to a service running on VideoCore. +--- /dev/null ++++ b/drivers/staging/vc04_services/bcm2835-codec/Makefile +@@ -0,0 +1,8 @@ ++# SPDX-License-Identifier: GPL-2.0 ++bcm2835-codec-objs := bcm2835-v4l2-codec.o ++ ++obj-$(CONFIG_VIDEO_CODEC_BCM2835) += bcm2835-codec.o ++ ++ccflags-y += \ ++ -Idrivers/staging/vc04_services \ ++ -D__VCCOREVER__=0x04000000 +--- /dev/null ++++ b/drivers/staging/vc04_services/bcm2835-codec/TODO +@@ -0,0 +1,24 @@ ++1) Convert to be a platform driver. ++ ++Right now when the module probes, it tries to initialize VCHI and ++errors out if it wasn't ready yet. If bcm2835-v4l2 was built in, then ++VCHI generally isn't ready because it depends on both the firmware and ++mailbox drivers having already loaded. ++ ++We should have VCHI create a platform device once it's initialized, ++and have this driver bind to it, so that we automatically load the ++v4l2 module after VCHI loads. ++ ++2) Support SELECTION API to define crop region on the image for encode. ++ ++Particularly for resolutions that aren't a multiple of the macroblock ++size, the codec will report a resolution that is a multiple of the macroblock ++size (it has to have the memory to decode into), and then a different crop ++region within that buffer. ++The most common example is 1080P, where the buffer will be 1920x1088 with a ++crop region of 1920x1080. ++ ++3) Refactor so that the component creation is only on queue_setup, not open. ++ ++Fixes v4l2-compliance failure on trying to open 100 instances of the ++device. +\ No newline at end of file +--- /dev/null ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -0,0 +1,2359 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++/* ++ * A v4l2-mem2mem device that wraps the video codec MMAL component. ++ * ++ * Copyright 2018 Raspberry Pi (Trading) Ltd. ++ * Author: Dave Stevenson (dave.stevenson@raspberrypi.org) ++ * ++ * Loosely based on the vim2m virtual driver by Pawel Osciak ++ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. ++ * Pawel Osciak, ++ * Marek Szyprowski, ++ * ++ * Whilst this driver uses the v4l2_mem2mem framework, it does not need the ++ * scheduling aspects, so will always take the buffers, pass them to the VPU, ++ * and then signal the job as complete. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vchiq-mmal/mmal-encodings.h" ++#include "vchiq-mmal/mmal-msg.h" ++#include "vchiq-mmal/mmal-parameters.h" ++#include "vchiq-mmal/mmal-vchiq.h" ++ ++/* ++ * Default /dev/videoN node numbers for decode and encode. ++ * Deliberately avoid the very low numbers as these are often taken by webcams ++ * etc, and simple apps tend to only go for /dev/video0. ++ */ ++static int decode_video_nr = 10; ++module_param(decode_video_nr, int, 0644); ++MODULE_PARM_DESC(decode_video_nr, "decoder video device number"); ++ ++static int encode_video_nr = 11; ++module_param(encode_video_nr, int, 0644); ++MODULE_PARM_DESC(encode_video_nr, "encoder video device number"); ++ ++static unsigned int debug; ++module_param(debug, uint, 0644); ++MODULE_PARM_DESC(debug, "activates debug info (0-3)"); ++ ++#define MIN_W 32 ++#define MIN_H 32 ++#define MAX_W 1920 ++#define MAX_H 1088 ++#define BPL_ALIGN 32 ++#define DEFAULT_WIDTH 640 ++#define DEFAULT_HEIGHT 480 ++/* ++ * The unanswered question - what is the maximum size of a compressed frame? ++ * V4L2 mandates that the encoded frame must fit in a single buffer. Sizing ++ * that buffer is a compromise between wasting memory and risking not fitting. ++ * The 1080P version of Big Buck Bunny has some frames that exceed 512kB. ++ * Adopt a moderately arbitrary split at 720P for switching between 512 and ++ * 768kB buffers. ++ */ ++#define DEF_COMP_BUF_SIZE_GREATER_720P (768 << 10) ++#define DEF_COMP_BUF_SIZE_720P_OR_LESS (512 << 10) ++ ++/* Flags that indicate a format can be used for capture/output */ ++#define MEM2MEM_CAPTURE BIT(0) ++#define MEM2MEM_OUTPUT BIT(1) ++ ++#define MEM2MEM_NAME "bcm2835-codec" ++ ++struct bcm2835_codec_fmt { ++ u32 fourcc; ++ int depth; ++ int bytesperline_align; ++ u32 flags; ++ u32 mmal_fmt; ++ bool decode_only; ++ bool encode_only; ++ int size_multiplier_x2; ++}; ++ ++/* Supported raw pixel formats. Those supported for both encode and decode ++ * must come first, with those only supported for decode coming after (there ++ * are no formats supported for encode only). ++ */ ++static struct bcm2835_codec_fmt raw_formats[] = { ++ { ++ .fourcc = V4L2_PIX_FMT_YUV420, ++ .depth = 8, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_I420, ++ .size_multiplier_x2 = 3, ++ }, { ++ .fourcc = V4L2_PIX_FMT_YVU420, ++ .depth = 8, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_YV12, ++ .size_multiplier_x2 = 3, ++ }, { ++ .fourcc = V4L2_PIX_FMT_NV12, ++ .depth = 8, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_NV12, ++ .size_multiplier_x2 = 3, ++ }, { ++ .fourcc = V4L2_PIX_FMT_NV21, ++ .depth = 8, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_NV21, ++ .size_multiplier_x2 = 3, ++ }, { ++ .fourcc = V4L2_PIX_FMT_RGB565, ++ .depth = 16, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_RGB16, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_YUYV, ++ .depth = 16, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_YUYV, ++ .encode_only = true, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_UYVY, ++ .depth = 16, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_UYVY, ++ .encode_only = true, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_YVYU, ++ .depth = 16, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_YVYU, ++ .encode_only = true, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_VYUY, ++ .depth = 16, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_VYUY, ++ .encode_only = true, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_RGB24, ++ .depth = 24, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_RGB24, ++ .encode_only = true, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_BGR24, ++ .depth = 24, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BGR24, ++ .encode_only = true, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_BGR32, ++ .depth = 32, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BGRA, ++ .encode_only = true, ++ .size_multiplier_x2 = 2, ++ }, ++}; ++ ++/* Supported encoded formats. Those supported for both encode and decode ++ * must come first, with those only supported for decode coming after (there ++ * are no formats supported for encode only). ++ */ ++static struct bcm2835_codec_fmt encoded_formats[] = { ++ { ++ .fourcc = V4L2_PIX_FMT_H264, ++ .depth = 0, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal_fmt = MMAL_ENCODING_H264, ++ }, { ++ .fourcc = V4L2_PIX_FMT_MJPEG, ++ .depth = 0, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal_fmt = MMAL_ENCODING_MJPEG, ++ }, { ++ .fourcc = V4L2_PIX_FMT_MPEG4, ++ .depth = 0, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal_fmt = MMAL_ENCODING_MP4V, ++ .decode_only = true, ++ }, { ++ .fourcc = V4L2_PIX_FMT_H263, ++ .depth = 0, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal_fmt = MMAL_ENCODING_H263, ++ .decode_only = true, ++ }, { ++ .fourcc = V4L2_PIX_FMT_MPEG2, ++ .depth = 0, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal_fmt = MMAL_ENCODING_MP2V, ++ .decode_only = true, ++ }, { ++ .fourcc = V4L2_PIX_FMT_VP8, ++ .depth = 0, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal_fmt = MMAL_ENCODING_VP8, ++ .decode_only = true, ++ }, ++ /* ++ * This list couold include VP6 and Theorafor decode, but V4L2 doesn't ++ * support them. ++ */ ++}; ++ ++struct bcm2835_codec_fmt_list { ++ struct bcm2835_codec_fmt *list; ++ unsigned int num_entries; ++}; ++ ++#define RAW_LIST 0 ++#define ENCODED_LIST 1 ++ ++struct bcm2835_codec_fmt_list formats[] = { ++ { ++ .list = raw_formats, ++ .num_entries = ARRAY_SIZE(raw_formats), ++ }, { ++ .list = encoded_formats, ++ .num_entries = ARRAY_SIZE(encoded_formats), ++ }, ++}; ++ ++struct m2m_mmal_buffer { ++ struct v4l2_m2m_buffer m2m; ++ struct mmal_buffer mmal; ++}; ++ ++/* Per-queue, driver-specific private data */ ++struct bcm2835_codec_q_data { ++ /* ++ * These parameters should be treated as gospel, with everything else ++ * being determined from them. ++ */ ++ /* Buffer width/height */ ++ unsigned int bytesperline; ++ unsigned int height; ++ /* Crop size used for selection handling */ ++ unsigned int crop_width; ++ unsigned int crop_height; ++ bool selection_set; ++ ++ unsigned int sizeimage; ++ unsigned int sequence; ++ struct bcm2835_codec_fmt *fmt; ++ ++ /* One extra buffer header so we can send an EOS. */ ++ struct m2m_mmal_buffer eos_buffer; ++ bool eos_buffer_in_use; /* debug only */ ++}; ++ ++enum { ++ V4L2_M2M_SRC = 0, ++ V4L2_M2M_DST = 1, ++}; ++ ++static inline struct bcm2835_codec_fmt_list *get_format_list(bool decode, ++ bool capture) ++{ ++ return decode ^ capture ? &formats[ENCODED_LIST] : &formats[RAW_LIST]; ++} ++ ++static struct bcm2835_codec_fmt *get_default_format(bool decode, bool capture) ++{ ++ return &get_format_list(decode, capture)->list[0]; ++} ++ ++static struct bcm2835_codec_fmt *find_format(struct v4l2_format *f, bool decode, ++ bool capture) ++{ ++ struct bcm2835_codec_fmt *fmt; ++ unsigned int k; ++ struct bcm2835_codec_fmt_list *fmts = get_format_list(decode, capture); ++ ++ for (k = 0; k < fmts->num_entries; k++) { ++ fmt = &fmts->list[k]; ++ if (fmt->fourcc == f->fmt.pix.pixelformat) ++ break; ++ } ++ ++ /* ++ * Some compressed formats are only supported for decoding, not ++ * encoding. ++ */ ++ if (!decode && fmts->list[k].decode_only) ++ return NULL; ++ ++ /* Some pixel formats are only supported for encoding, not decoding. */ ++ if (decode && fmts->list[k].encode_only) ++ return NULL; ++ ++ if (k == fmts->num_entries) ++ return NULL; ++ ++ return &fmts->list[k]; ++} ++ ++struct bcm2835_codec_dev { ++ struct platform_device *pdev; ++ ++ /* v4l2 devices */ ++ struct v4l2_device v4l2_dev; ++ struct video_device vfd; ++ /* mutex for the v4l2 device */ ++ struct mutex dev_mutex; ++ atomic_t num_inst; ++ ++ /* allocated mmal instance and components */ ++ bool decode; /* Is this instance a decoder? */ ++ struct vchiq_mmal_instance *instance; ++ ++ struct v4l2_m2m_dev *m2m_dev; ++}; ++ ++struct bcm2835_codec_ctx { ++ struct v4l2_fh fh; ++ struct bcm2835_codec_dev *dev; ++ ++ struct v4l2_ctrl_handler hdl; ++ ++ struct vchiq_mmal_component *component; ++ bool component_enabled; ++ ++ enum v4l2_colorspace colorspace; ++ enum v4l2_ycbcr_encoding ycbcr_enc; ++ enum v4l2_xfer_func xfer_func; ++ enum v4l2_quantization quant; ++ ++ /* Source and destination queue data */ ++ struct bcm2835_codec_q_data q_data[2]; ++ s32 bitrate; ++ ++ bool aborting; ++ int num_ip_buffers; ++ int num_op_buffers; ++ struct completion frame_cmplt; ++}; ++ ++struct bcm2835_codec_driver { ++ struct bcm2835_codec_dev *encode; ++ struct bcm2835_codec_dev *decode; ++}; ++ ++static inline struct bcm2835_codec_ctx *file2ctx(struct file *file) ++{ ++ return container_of(file->private_data, struct bcm2835_codec_ctx, fh); ++} ++ ++static struct bcm2835_codec_q_data *get_q_data(struct bcm2835_codec_ctx *ctx, ++ enum v4l2_buf_type type) ++{ ++ switch (type) { ++ case V4L2_BUF_TYPE_VIDEO_OUTPUT: ++ return &ctx->q_data[V4L2_M2M_SRC]; ++ case V4L2_BUF_TYPE_VIDEO_CAPTURE: ++ return &ctx->q_data[V4L2_M2M_DST]; ++ default: ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Invalid queue type %u\n", ++ __func__, type); ++ break; ++ } ++ return NULL; ++} ++ ++static struct vchiq_mmal_port *get_port_data(struct bcm2835_codec_ctx *ctx, ++ enum v4l2_buf_type type) ++{ ++ if (!ctx->component) ++ return NULL; ++ ++ switch (type) { ++ case V4L2_BUF_TYPE_VIDEO_OUTPUT: ++ return &ctx->component->input[0]; ++ case V4L2_BUF_TYPE_VIDEO_CAPTURE: ++ return &ctx->component->output[0]; ++ default: ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Invalid queue type %u\n", ++ __func__, type); ++ break; ++ } ++ return NULL; ++} ++ ++/* ++ * mem2mem callbacks ++ */ ++ ++/** ++ * job_ready() - check whether an instance is ready to be scheduled to run ++ */ ++static int job_ready(void *priv) ++{ ++ struct bcm2835_codec_ctx *ctx = priv; ++ ++ if (!v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) && ++ !v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx)) ++ return 0; ++ ++ return 1; ++} ++ ++static void job_abort(void *priv) ++{ ++ struct bcm2835_codec_ctx *ctx = priv; ++ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s\n", __func__); ++ /* Will cancel the transaction in the next interrupt handler */ ++ ctx->aborting = 1; ++} ++ ++static inline unsigned int get_sizeimage(int bpl, int height, ++ struct bcm2835_codec_fmt *fmt) ++{ ++ return (bpl * height * fmt->size_multiplier_x2) >> 1; ++} ++ ++static inline unsigned int get_bytesperline(int width, ++ struct bcm2835_codec_fmt *fmt) ++{ ++ return ALIGN((width * fmt->depth) >> 3, fmt->bytesperline_align); ++} ++ ++static void setup_mmal_port_format(struct bcm2835_codec_ctx *ctx, ++ bool decode, ++ struct bcm2835_codec_q_data *q_data, ++ struct vchiq_mmal_port *port) ++{ ++ port->format.encoding = q_data->fmt->mmal_fmt; ++ ++ if (!(q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED)) { ++ /* Raw image format - set width/height */ ++ port->es.video.width = q_data->bytesperline / ++ (q_data->fmt->depth >> 3); ++ port->es.video.height = q_data->height; ++ port->es.video.crop.width = q_data->crop_width; ++ port->es.video.crop.height = q_data->crop_height; ++ port->es.video.frame_rate.num = 0; ++ port->es.video.frame_rate.den = 1; ++ } else { ++ /* Compressed format - leave resolution as 0 for decode */ ++ if (decode) { ++ port->es.video.width = 0; ++ port->es.video.height = 0; ++ port->es.video.crop.width = 0; ++ port->es.video.crop.height = 0; ++ } else { ++ port->es.video.width = q_data->crop_width; ++ port->es.video.height = q_data->height; ++ port->es.video.crop.width = q_data->crop_width; ++ port->es.video.crop.height = q_data->crop_height; ++ port->format.bitrate = ctx->bitrate; ++ } ++ port->es.video.frame_rate.num = 0; ++ port->es.video.frame_rate.den = 1; ++ } ++ port->es.video.crop.x = 0; ++ port->es.video.crop.y = 0; ++ ++ port->current_buffer.size = q_data->sizeimage; ++}; ++ ++static void ip_buffer_cb(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, int status, ++ struct mmal_buffer *mmal_buf) ++{ ++ struct bcm2835_codec_ctx *ctx = port->cb_ctx/*, *curr_ctx*/; ++ struct m2m_mmal_buffer *buf = ++ container_of(mmal_buf, struct m2m_mmal_buffer, mmal); ++ ++ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: port %p buf %p length %lu, flags %x\n", ++ __func__, port, mmal_buf, mmal_buf->length, ++ mmal_buf->mmal_flags); ++ ++ if (buf == &ctx->q_data[V4L2_M2M_SRC].eos_buffer) { ++ /* Do we need to add lcoking to prevent multiple submission of ++ * the EOS, and therefore handle mutliple return here? ++ */ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: eos buffer returned.\n", ++ __func__); ++ ctx->q_data[V4L2_M2M_SRC].eos_buffer_in_use = false; ++ return; ++ } ++ ++ if (status) { ++ /* error in transfer */ ++ if (buf) ++ /* there was a buffer with the error so return it */ ++ vb2_buffer_done(&buf->m2m.vb.vb2_buf, ++ VB2_BUF_STATE_ERROR); ++ return; ++ } ++ if (mmal_buf->cmd) { ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Not expecting cmd msgs on ip callback - %08x\n", ++ __func__, mmal_buf->cmd); ++ /* ++ * CHECKME: Should we return here. The buffer shouldn't have a ++ * message context or vb2 buf associated. ++ */ ++ } ++ ++ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: no error. Return buffer %p\n", ++ __func__, &buf->m2m.vb.vb2_buf); ++ vb2_buffer_done(&buf->m2m.vb.vb2_buf, VB2_BUF_STATE_DONE); ++ ++ ctx->num_ip_buffers++; ++ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: done %d input buffers\n", ++ __func__, ctx->num_ip_buffers); ++ ++ if (!port->enabled) ++ complete(&ctx->frame_cmplt); ++} ++ ++static void queue_res_chg_event(struct bcm2835_codec_ctx *ctx) ++{ ++ static const struct v4l2_event ev_src_ch = { ++ .type = V4L2_EVENT_SOURCE_CHANGE, ++ .u.src_change.changes = ++ V4L2_EVENT_SRC_CH_RESOLUTION, ++ }; ++ ++ v4l2_event_queue_fh(&ctx->fh, &ev_src_ch); ++} ++ ++static void send_eos_event(struct bcm2835_codec_ctx *ctx) ++{ ++ static const struct v4l2_event ev = { ++ .type = V4L2_EVENT_EOS, ++ }; ++ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Sending EOS event\n"); ++ ++ v4l2_event_queue_fh(&ctx->fh, &ev); ++} ++ ++static void color_mmal2v4l(struct bcm2835_codec_ctx *ctx, u32 mmal_color_space) ++{ ++ switch (mmal_color_space) { ++ case MMAL_COLOR_SPACE_ITUR_BT601: ++ ctx->colorspace = V4L2_COLORSPACE_REC709; ++ ctx->xfer_func = V4L2_XFER_FUNC_709; ++ ctx->ycbcr_enc = V4L2_YCBCR_ENC_601; ++ ctx->quant = V4L2_QUANTIZATION_LIM_RANGE; ++ break; ++ ++ case MMAL_COLOR_SPACE_ITUR_BT709: ++ ctx->colorspace = V4L2_COLORSPACE_REC709; ++ ctx->xfer_func = V4L2_XFER_FUNC_709; ++ ctx->ycbcr_enc = V4L2_YCBCR_ENC_709; ++ ctx->quant = V4L2_QUANTIZATION_LIM_RANGE; ++ break; ++ } ++} ++ ++static void handle_fmt_changed(struct bcm2835_codec_ctx *ctx, ++ struct mmal_buffer *mmal_buf) ++{ ++ struct bcm2835_codec_q_data *q_data; ++ struct mmal_msg_event_format_changed *format = ++ (struct mmal_msg_event_format_changed *)mmal_buf->buffer; ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Format changed: buff size min %u, rec %u, buff num min %u, rec %u\n", ++ __func__, ++ format->buffer_size_min, ++ format->buffer_size_recommended, ++ format->buffer_num_min, ++ format->buffer_num_recommended ++ ); ++ if (format->format.type != MMAL_ES_TYPE_VIDEO) { ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Format changed but not video %u\n", ++ __func__, format->format.type); ++ return; ++ } ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Format changed to %ux%u, crop %ux%u, colourspace %08X\n", ++ __func__, format->es.video.width, format->es.video.height, ++ format->es.video.crop.width, format->es.video.crop.height, ++ format->es.video.color_space); ++ ++ q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); ++ q_data->crop_width = format->es.video.crop.width; ++ q_data->crop_height = format->es.video.crop.height; ++ q_data->bytesperline = format->es.video.crop.width; ++ q_data->height = format->es.video.height; ++ q_data->sizeimage = format->buffer_size_min; ++ if (format->es.video.color_space) ++ color_mmal2v4l(ctx, format->es.video.color_space); ++ ++ queue_res_chg_event(ctx); ++} ++ ++static void op_buffer_cb(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, int status, ++ struct mmal_buffer *mmal_buf) ++{ ++ struct bcm2835_codec_ctx *ctx = port->cb_ctx; ++ struct m2m_mmal_buffer *buf; ++ struct vb2_v4l2_buffer *vb2; ++ ++ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, ++ "%s: status:%d, buf:%p, length:%lu, flags %u, pts %lld\n", ++ __func__, status, mmal_buf, mmal_buf->length, ++ mmal_buf->mmal_flags, mmal_buf->pts); ++ ++ if (status) { ++ /* error in transfer */ ++ if (vb2) { ++ /* there was a buffer with the error so return it */ ++ vb2_buffer_done(&vb2->vb2_buf, VB2_BUF_STATE_ERROR); ++ } ++ return; ++ } ++ ++ if (mmal_buf->cmd) { ++ switch (mmal_buf->cmd) { ++ case MMAL_EVENT_FORMAT_CHANGED: ++ { ++ handle_fmt_changed(ctx, mmal_buf); ++ break; ++ } ++ default: ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Unexpected event on output callback - %08x\n", ++ __func__, mmal_buf->cmd); ++ break; ++ } ++ return; ++ } ++ ++ buf = container_of(mmal_buf, struct m2m_mmal_buffer, mmal); ++ vb2 = &buf->m2m.vb; ++ ++ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: length %lu, flags %x, idx %u\n", ++ __func__, mmal_buf->length, mmal_buf->mmal_flags, ++ vb2->vb2_buf.index); ++ ++ if (mmal_buf->length == 0) { ++ /* stream ended, or buffer being returned during disable. */ ++ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: Empty buffer - flags %04x", ++ __func__, mmal_buf->mmal_flags); ++ if (!mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS) { ++ vb2_buffer_done(&vb2->vb2_buf, VB2_BUF_STATE_ERROR); ++ if (!port->enabled) ++ complete(&ctx->frame_cmplt); ++ return; ++ } ++ } ++ if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS) { ++ /* EOS packet from the VPU */ ++ send_eos_event(ctx); ++ vb2->flags |= V4L2_BUF_FLAG_LAST; ++ } ++ ++ vb2->vb2_buf.timestamp = mmal_buf->pts; ++ ++ vb2_set_plane_payload(&vb2->vb2_buf, 0, mmal_buf->length); ++ if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) ++ vb2->flags |= V4L2_BUF_FLAG_KEYFRAME; ++ ++ vb2_buffer_done(&vb2->vb2_buf, VB2_BUF_STATE_DONE); ++ ctx->num_op_buffers++; ++ ++ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: done %d output buffers\n", ++ __func__, ctx->num_op_buffers); ++ ++ if (!port->enabled) ++ complete(&ctx->frame_cmplt); ++} ++ ++/* vb2_to_mmal_buffer() - converts vb2 buffer header to MMAL ++ * ++ * Copies all the required fields from a VB2 buffer to the MMAL buffer header, ++ * ready for sending to the VPU. ++ */ ++static void vb2_to_mmal_buffer(struct m2m_mmal_buffer *buf, ++ struct vb2_v4l2_buffer *vb2) ++{ ++ buf->mmal.mmal_flags = 0; ++ if (vb2->flags & V4L2_BUF_FLAG_KEYFRAME) ++ buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_KEYFRAME; ++ ++ /* ++ * Adding this means that the data must be framed correctly as one frame ++ * per buffer. The underlying decoder has no such requirement, but it ++ * will reduce latency as the bistream parser will be kicked immediately ++ * to parse the frame, rather than relying on its own heuristics for ++ * when to wake up. ++ */ ++ buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_FRAME_END; ++ ++ buf->mmal.length = vb2->vb2_buf.planes[0].bytesused; ++ /* ++ * Minor ambiguity in the V4L2 spec as to whether passing in a 0 length ++ * buffer, or one with V4L2_BUF_FLAG_LAST set denotes end of stream. ++ * Handle either. ++ */ ++ if (!buf->mmal.length || vb2->flags & V4L2_BUF_FLAG_LAST) ++ buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_EOS; ++ ++ buf->mmal.pts = vb2->vb2_buf.timestamp; ++ buf->mmal.dts = MMAL_TIME_UNKNOWN; ++} ++ ++/* device_run() - prepares and starts the device ++ * ++ * This simulates all the immediate preparations required before starting ++ * a device. This will be called by the framework when it decides to schedule ++ * a particular instance. ++ */ ++static void device_run(void *priv) ++{ ++ struct bcm2835_codec_ctx *ctx = priv; ++ struct bcm2835_codec_dev *dev = ctx->dev; ++ struct vb2_v4l2_buffer *src_buf, *dst_buf; ++ struct m2m_mmal_buffer *src_m2m_buf, *dst_m2m_buf; ++ struct v4l2_m2m_buffer *m2m; ++ int ret; ++ ++ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: off we go\n", __func__); ++ ++ src_buf = v4l2_m2m_buf_remove(&ctx->fh.m2m_ctx->out_q_ctx); ++ if (src_buf) { ++ m2m = container_of(src_buf, struct v4l2_m2m_buffer, vb); ++ src_m2m_buf = container_of(m2m, struct m2m_mmal_buffer, m2m); ++ vb2_to_mmal_buffer(src_m2m_buf, src_buf); ++ ++ ret = vchiq_mmal_submit_buffer(dev->instance, ++ &ctx->component->input[0], ++ &src_m2m_buf->mmal); ++ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: Submitted ip buffer len %lu, pts %llu, flags %04x\n", ++ __func__, src_m2m_buf->mmal.length, ++ src_m2m_buf->mmal.pts, src_m2m_buf->mmal.mmal_flags); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed submitting ip buffer\n", ++ __func__); ++ } ++ ++ dst_buf = v4l2_m2m_buf_remove(&ctx->fh.m2m_ctx->cap_q_ctx); ++ if (dst_buf) { ++ m2m = container_of(dst_buf, struct v4l2_m2m_buffer, vb); ++ dst_m2m_buf = container_of(m2m, struct m2m_mmal_buffer, m2m); ++ vb2_to_mmal_buffer(dst_m2m_buf, dst_buf); ++ ++ ret = vchiq_mmal_submit_buffer(dev->instance, ++ &ctx->component->output[0], ++ &dst_m2m_buf->mmal); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed submitting op buffer\n", ++ __func__); ++ } ++ ++ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: Submitted src %p, dst %p\n", ++ __func__, src_m2m_buf, dst_m2m_buf); ++ ++ /* Complete the job here. */ ++ v4l2_m2m_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx); ++} ++ ++/* ++ * video ioctls ++ */ ++static int vidioc_querycap(struct file *file, void *priv, ++ struct v4l2_capability *cap) ++{ ++ strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); ++ strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); ++ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", ++ MEM2MEM_NAME); ++ cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; ++ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; ++ return 0; ++} ++ ++static int enum_fmt(struct v4l2_fmtdesc *f, bool decode, bool capture) ++{ ++ struct bcm2835_codec_fmt *fmt; ++ struct bcm2835_codec_fmt_list *fmts = get_format_list(decode, capture); ++ ++ if (f->index < fmts->num_entries) { ++ /* Format found */ ++ /* Check format isn't a decode only format when encoding */ ++ if (!decode && ++ fmts->list[f->index].decode_only) ++ return -EINVAL; ++ /* Check format isn't a decode only format when encoding */ ++ if (decode && ++ fmts->list[f->index].encode_only) ++ return -EINVAL; ++ ++ fmt = &fmts->list[f->index]; ++ f->pixelformat = fmt->fourcc; ++ f->flags = fmt->flags; ++ return 0; ++ } ++ ++ /* Format not found */ ++ return -EINVAL; ++} ++ ++static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_fmtdesc *f) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ ++ return enum_fmt(f, ctx->dev->decode, true); ++} ++ ++static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, ++ struct v4l2_fmtdesc *f) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ ++ return enum_fmt(f, ctx->dev->decode, false); ++} ++ ++static int vidioc_g_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f) ++{ ++ struct vb2_queue *vq; ++ struct bcm2835_codec_q_data *q_data; ++ ++ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); ++ if (!vq) ++ return -EINVAL; ++ ++ q_data = get_q_data(ctx, f->type); ++ ++ f->fmt.pix.width = q_data->crop_width; ++ f->fmt.pix.height = q_data->height; ++ f->fmt.pix.field = V4L2_FIELD_NONE; ++ f->fmt.pix.pixelformat = q_data->fmt->fourcc; ++ f->fmt.pix.bytesperline = q_data->bytesperline; ++ f->fmt.pix.sizeimage = q_data->sizeimage; ++ f->fmt.pix.colorspace = ctx->colorspace; ++ f->fmt.pix.xfer_func = ctx->xfer_func; ++ f->fmt.pix.ycbcr_enc = ctx->ycbcr_enc; ++ f->fmt.pix.quantization = ctx->quant; ++ ++ return 0; ++} ++ ++static int vidioc_g_fmt_vid_out(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ return vidioc_g_fmt(file2ctx(file), f); ++} ++ ++static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ return vidioc_g_fmt(file2ctx(file), f); ++} ++ ++static int vidioc_try_fmt(struct v4l2_format *f, struct bcm2835_codec_fmt *fmt) ++{ ++ /* ++ * The V4L2 specification requires the driver to correct the format ++ * struct if any of the dimensions is unsupported ++ */ ++ if (f->fmt.pix.width > MAX_W) ++ f->fmt.pix.width = MAX_W; ++ if (f->fmt.pix.height > MAX_H) ++ f->fmt.pix.height = MAX_H; ++ ++ if (!fmt->flags & V4L2_FMT_FLAG_COMPRESSED) { ++ /* Only clip min w/h on capture. Treat 0x0 as unknown. */ ++ if (f->fmt.pix.width < MIN_W) ++ f->fmt.pix.width = MIN_W; ++ if (f->fmt.pix.height < MIN_H) ++ f->fmt.pix.height = MIN_H; ++ ++ /* ++ * Buffer must have a vertical alignment of 16 lines. ++ * The selection will reflect any cropping rectangle when only ++ * some of the pixels are active. ++ */ ++ f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); ++ ++ f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, ++ fmt); ++ f->fmt.pix.sizeimage = get_sizeimage(f->fmt.pix.bytesperline, ++ f->fmt.pix.height, ++ fmt); ++ } else { ++ u32 min_size = f->fmt.pix.width > 1280 || ++ f->fmt.pix.height > 720 ? ++ DEF_COMP_BUF_SIZE_GREATER_720P : ++ DEF_COMP_BUF_SIZE_720P_OR_LESS; ++ ++ f->fmt.pix.bytesperline = 0; ++ if (f->fmt.pix.sizeimage < min_size) ++ f->fmt.pix.sizeimage = min_size; ++ } ++ ++ f->fmt.pix.field = V4L2_FIELD_NONE; ++ ++ return 0; ++} ++ ++static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bcm2835_codec_fmt *fmt; ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ ++ fmt = find_format(f, ctx->dev->decode, true); ++ if (!fmt) { ++ f->fmt.pix.pixelformat = get_default_format(ctx->dev->decode, ++ true)->fourcc; ++ fmt = find_format(f, ctx->dev->decode, true); ++ } ++ ++ return vidioc_try_fmt(f, fmt); ++} ++ ++static int vidioc_try_fmt_vid_out(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bcm2835_codec_fmt *fmt; ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ ++ fmt = find_format(f, ctx->dev->decode, false); ++ if (!fmt) { ++ f->fmt.pix.pixelformat = get_default_format(ctx->dev->decode, ++ false)->fourcc; ++ fmt = find_format(f, ctx->dev->decode, false); ++ } ++ ++ if (!f->fmt.pix.colorspace) ++ f->fmt.pix.colorspace = ctx->colorspace; ++ ++ return vidioc_try_fmt(f, fmt); ++} ++ ++static int vidioc_s_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f, ++ unsigned int requested_height) ++{ ++ struct bcm2835_codec_q_data *q_data; ++ struct vb2_queue *vq; ++ struct vchiq_mmal_port *port; ++ bool update_capture_port = false; ++ int ret; ++ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", ++ f->type, f->fmt.pix.width, f->fmt.pix.height, ++ f->fmt.pix.pixelformat, f->fmt.pix.sizeimage); ++ ++ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); ++ if (!vq) ++ return -EINVAL; ++ ++ q_data = get_q_data(ctx, f->type); ++ if (!q_data) ++ return -EINVAL; ++ ++ if (vb2_is_busy(vq)) { ++ v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); ++ return -EBUSY; ++ } ++ ++ q_data->fmt = find_format(f, ctx->dev->decode, ++ f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE); ++ q_data->crop_width = f->fmt.pix.width; ++ q_data->height = f->fmt.pix.height; ++ if (!q_data->selection_set) ++ q_data->crop_height = requested_height; ++ ++ /* ++ * Copying the behaviour of vicodec which retains a single set of ++ * colorspace parameters for both input and output. ++ */ ++ ctx->colorspace = f->fmt.pix.colorspace; ++ ctx->xfer_func = f->fmt.pix.xfer_func; ++ ctx->ycbcr_enc = f->fmt.pix.ycbcr_enc; ++ ctx->quant = f->fmt.pix.quantization; ++ ++ /* All parameters should have been set correctly by try_fmt */ ++ q_data->bytesperline = f->fmt.pix.bytesperline; ++ q_data->sizeimage = f->fmt.pix.sizeimage; ++ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Calulated bpl as %u, size %u\n", ++ q_data->bytesperline, q_data->sizeimage); ++ ++ if (ctx->dev->decode && q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED && ++ f->fmt.pix.width && f->fmt.pix.height) { ++ /* ++ * On the decoder, if provided with a resolution on the input ++ * side, then replicate that to the output side. ++ * GStreamer appears not to support V4L2_EVENT_SOURCE_CHANGE, ++ * nor set up a resolution on the output side, therefore ++ * we can't decode anything at a resolution other than the ++ * default one. ++ */ ++ struct bcm2835_codec_q_data *q_data_dst = ++ &ctx->q_data[V4L2_M2M_DST]; ++ ++ q_data_dst->crop_width = q_data->crop_width; ++ q_data_dst->crop_height = q_data->crop_height; ++ q_data_dst->height = ALIGN(q_data->crop_height, 16); ++ ++ q_data_dst->bytesperline = ++ get_bytesperline(f->fmt.pix.width, q_data_dst->fmt); ++ q_data_dst->sizeimage = get_sizeimage(q_data_dst->bytesperline, ++ q_data_dst->height, ++ q_data_dst->fmt); ++ update_capture_port = true; ++ } ++ ++ /* If we have a component then setup the port as well */ ++ port = get_port_data(ctx, vq->type); ++ if (!port) ++ return 0; ++ ++ setup_mmal_port_format(ctx, ctx->dev->decode, q_data, port); ++ ret = vchiq_mmal_port_set_format(ctx->dev->instance, port); ++ if (ret) { ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed vchiq_mmal_port_set_format on port, ret %d\n", ++ __func__, ret); ++ ret = -EINVAL; ++ } ++ ++ if (q_data->sizeimage < port->minimum_buffer.size) { ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Current buffer size of %u < min buf size %u - driver mismatch to MMAL\n", ++ __func__, q_data->sizeimage, ++ port->minimum_buffer.size); ++ } ++ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Set format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", ++ f->type, q_data->crop_width, q_data->height, ++ q_data->fmt->fourcc, q_data->sizeimage); ++ ++ if (update_capture_port) { ++ struct vchiq_mmal_port *port_dst = &ctx->component->output[0]; ++ struct bcm2835_codec_q_data *q_data_dst = ++ &ctx->q_data[V4L2_M2M_DST]; ++ ++ setup_mmal_port_format(ctx, ctx->dev->decode, q_data_dst, ++ port_dst); ++ ret = vchiq_mmal_port_set_format(ctx->dev->instance, port_dst); ++ if (ret) { ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed vchiq_mmal_port_set_format on output port, ret %d\n", ++ __func__, ret); ++ ret = -EINVAL; ++ } ++ } ++ return ret; ++} ++ ++static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ unsigned int height = f->fmt.pix.height; ++ int ret; ++ ++ ret = vidioc_try_fmt_vid_cap(file, priv, f); ++ if (ret) ++ return ret; ++ ++ return vidioc_s_fmt(file2ctx(file), f, height); ++} ++ ++static int vidioc_s_fmt_vid_out(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ unsigned int height = f->fmt.pix.height; ++ int ret; ++ ++ ret = vidioc_try_fmt_vid_out(file, priv, f); ++ if (ret) ++ return ret; ++ ++ ret = vidioc_s_fmt(file2ctx(file), f, height); ++ return ret; ++} ++ ++static int vidioc_g_selection(struct file *file, void *priv, ++ struct v4l2_selection *s) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ struct bcm2835_codec_q_data *q_data; ++ bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? ++ true : false; ++ ++ if (capture_queue ^ ctx->dev->decode) ++ /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ ++ return -EINVAL; ++ ++ q_data = get_q_data(ctx, s->type); ++ if (!q_data) ++ return -EINVAL; ++ ++ if (ctx->dev->decode) { ++ switch (s->target) { ++ case V4L2_SEL_TGT_COMPOSE_DEFAULT: ++ case V4L2_SEL_TGT_COMPOSE: ++ s->r.left = 0; ++ s->r.top = 0; ++ s->r.width = q_data->crop_width; ++ s->r.height = q_data->crop_height; ++ break; ++ case V4L2_SEL_TGT_COMPOSE_BOUNDS: ++ s->r.left = 0; ++ s->r.top = 0; ++ s->r.width = q_data->crop_width; ++ s->r.height = q_data->crop_height; ++ break; ++ default: ++ return -EINVAL; ++ } ++ } else { ++ switch (s->target) { ++ case V4L2_SEL_TGT_CROP_DEFAULT: ++ case V4L2_SEL_TGT_CROP_BOUNDS: ++ s->r.top = 0; ++ s->r.left = 0; ++ s->r.width = q_data->bytesperline; ++ s->r.height = q_data->height; ++ break; ++ case V4L2_SEL_TGT_CROP: ++ s->r.top = 0; ++ s->r.left = 0; ++ s->r.width = q_data->crop_width; ++ s->r.height = q_data->crop_height; ++ break; ++ default: ++ return -EINVAL; ++ } ++ } ++ ++ return 0; ++} ++ ++static int vidioc_s_selection(struct file *file, void *priv, ++ struct v4l2_selection *s) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ struct bcm2835_codec_q_data *q_data = NULL; ++ bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? ++ true : false; ++ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: ctx %p, type %d, q_data %p, target %d, rect x/y %d/%d, w/h %ux%u\n", ++ __func__, ctx, s->type, q_data, s->target, s->r.left, s->r.top, ++ s->r.width, s->r.height); ++ ++ if (capture_queue ^ ctx->dev->decode) ++ /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ ++ return -EINVAL; ++ ++ q_data = get_q_data(ctx, s->type); ++ if (!q_data) ++ return -EINVAL; ++ ++ if (ctx->dev->decode) { ++ switch (s->target) { ++ case V4L2_SEL_TGT_COMPOSE: ++ /* Accept cropped image */ ++ s->r.left = 0; ++ s->r.top = 0; ++ s->r.width = min(s->r.width, q_data->crop_width); ++ s->r.height = min(s->r.height, q_data->height); ++ q_data->crop_width = s->r.width; ++ q_data->crop_height = s->r.height; ++ q_data->selection_set = true; ++ break; ++ default: ++ return -EINVAL; ++ } ++ } else { ++ switch (s->target) { ++ case V4L2_SEL_TGT_CROP: ++ /* Only support crop from (0,0) */ ++ s->r.top = 0; ++ s->r.left = 0; ++ s->r.width = min(s->r.width, q_data->crop_width); ++ s->r.height = min(s->r.height, q_data->crop_height); ++ q_data->crop_width = s->r.width; ++ q_data->crop_height = s->r.height; ++ q_data->selection_set = true; ++ break; ++ default: ++ return -EINVAL; ++ } ++ } ++ ++ return 0; ++} ++ ++static int vidioc_subscribe_evt(struct v4l2_fh *fh, ++ const struct v4l2_event_subscription *sub) ++{ ++ switch (sub->type) { ++ case V4L2_EVENT_EOS: ++ return v4l2_event_subscribe(fh, sub, 2, NULL); ++ case V4L2_EVENT_SOURCE_CHANGE: ++ return v4l2_src_change_event_subscribe(fh, sub); ++ default: ++ return v4l2_ctrl_subscribe_event(fh, sub); ++ } ++} ++ ++static int bcm2835_codec_set_level_profile(struct bcm2835_codec_ctx *ctx, ++ struct v4l2_ctrl *ctrl) ++{ ++ struct mmal_parameter_video_profile param; ++ int param_size = sizeof(param); ++ int ret; ++ ++ /* ++ * Level and Profile are set via the same MMAL parameter. ++ * Retrieve the current settings and amend the one that has changed. ++ */ ++ ret = vchiq_mmal_port_parameter_get(ctx->dev->instance, ++ &ctx->component->output[0], ++ MMAL_PARAMETER_PROFILE, ++ ¶m, ++ ¶m_size); ++ if (ret) ++ return ret; ++ ++ switch (ctrl->id) { ++ case V4L2_CID_MPEG_VIDEO_H264_PROFILE: ++ switch (ctrl->val) { ++ case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: ++ param.profile = MMAL_VIDEO_PROFILE_H264_BASELINE; ++ break; ++ case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: ++ param.profile = ++ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE; ++ break; ++ case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: ++ param.profile = MMAL_VIDEO_PROFILE_H264_MAIN; ++ break; ++ case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: ++ param.profile = MMAL_VIDEO_PROFILE_H264_HIGH; ++ break; ++ default: ++ /* Should never get here */ ++ break; ++ } ++ break; ++ ++ case V4L2_CID_MPEG_VIDEO_H264_LEVEL: ++ switch (ctrl->val) { ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_1; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1B: ++ param.level = MMAL_VIDEO_LEVEL_H264_1b; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_1: ++ param.level = MMAL_VIDEO_LEVEL_H264_11; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_2: ++ param.level = MMAL_VIDEO_LEVEL_H264_12; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_3: ++ param.level = MMAL_VIDEO_LEVEL_H264_13; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_2; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_1: ++ param.level = MMAL_VIDEO_LEVEL_H264_21; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_2: ++ param.level = MMAL_VIDEO_LEVEL_H264_22; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_3; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_1: ++ param.level = MMAL_VIDEO_LEVEL_H264_31; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_2: ++ param.level = MMAL_VIDEO_LEVEL_H264_32; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_4_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_4; ++ break; ++ default: ++ /* Should never get here */ ++ break; ++ } ++ } ++ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, ++ &ctx->component->output[0], ++ MMAL_PARAMETER_PROFILE, ++ ¶m, ++ param_size); ++ ++ return ret; ++} ++ ++static int bcm2835_codec_s_ctrl(struct v4l2_ctrl *ctrl) ++{ ++ struct bcm2835_codec_ctx *ctx = ++ container_of(ctrl->handler, struct bcm2835_codec_ctx, hdl); ++ int ret = 0; ++ ++ switch (ctrl->id) { ++ case V4L2_CID_MPEG_VIDEO_BITRATE: ++ ctx->bitrate = ctrl->val; ++ if (!ctx->component) ++ break; ++ ++ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, ++ &ctx->component->output[0], ++ MMAL_PARAMETER_VIDEO_BIT_RATE, ++ &ctrl->val, ++ sizeof(ctrl->val)); ++ break; ++ ++ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: { ++ u32 bitrate_mode; ++ ++ if (!ctx->component) ++ break; ++ ++ switch (ctrl->val) { ++ default: ++ case V4L2_MPEG_VIDEO_BITRATE_MODE_VBR: ++ bitrate_mode = MMAL_VIDEO_RATECONTROL_VARIABLE; ++ break; ++ case V4L2_MPEG_VIDEO_BITRATE_MODE_CBR: ++ bitrate_mode = MMAL_VIDEO_RATECONTROL_CONSTANT; ++ break; ++ } ++ ++ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, ++ &ctx->component->output[0], ++ MMAL_PARAMETER_RATECONTROL, ++ &bitrate_mode, ++ sizeof(bitrate_mode)); ++ break; ++ } ++ case V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER: ++ if (!ctx->component) ++ break; ++ ++ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, ++ &ctx->component->output[0], ++ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER, ++ &ctrl->val, ++ sizeof(ctrl->val)); ++ break; ++ ++ case V4L2_CID_MPEG_VIDEO_H264_I_PERIOD: ++ if (!ctx->component) ++ break; ++ ++ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, ++ &ctx->component->output[0], ++ MMAL_PARAMETER_INTRAPERIOD, ++ &ctrl->val, ++ sizeof(ctrl->val)); ++ break; ++ ++ case V4L2_CID_MPEG_VIDEO_H264_PROFILE: ++ case V4L2_CID_MPEG_VIDEO_H264_LEVEL: ++ if (!ctx->component) ++ break; ++ ++ ret = bcm2835_codec_set_level_profile(ctx, ctrl); ++ break; ++ ++ default: ++ v4l2_err(&ctx->dev->v4l2_dev, "Invalid control\n"); ++ return -EINVAL; ++ } ++ ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, "Failed setting ctrl %08x, ret %d\n", ++ ctrl->id, ret); ++ return ret ? -EINVAL : 0; ++} ++ ++static const struct v4l2_ctrl_ops bcm2835_codec_ctrl_ops = { ++ .s_ctrl = bcm2835_codec_s_ctrl, ++}; ++ ++static int vidioc_try_decoder_cmd(struct file *file, void *priv, ++ struct v4l2_decoder_cmd *cmd) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ ++ if (!ctx->dev->decode) ++ return -EINVAL; ++ ++ switch (cmd->cmd) { ++ case V4L2_DEC_CMD_STOP: ++ if (cmd->flags & V4L2_DEC_CMD_STOP_TO_BLACK) { ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: DEC cmd->flags=%u stop to black not supported", ++ __func__, cmd->flags); ++ return -EINVAL; ++ } ++ break; ++ case V4L2_DEC_CMD_START: ++ break; ++ default: ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++static int vidioc_decoder_cmd(struct file *file, void *priv, ++ struct v4l2_decoder_cmd *cmd) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ struct bcm2835_codec_q_data *q_data = &ctx->q_data[V4L2_M2M_SRC]; ++ int ret; ++ ++ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s, cmd %u", __func__, ++ cmd->cmd); ++ ret = vidioc_try_decoder_cmd(file, priv, cmd); ++ if (ret) ++ return ret; ++ ++ switch (cmd->cmd) { ++ case V4L2_DEC_CMD_STOP: ++ if (q_data->eos_buffer_in_use) ++ v4l2_err(&ctx->dev->v4l2_dev, "EOS buffers already in use\n"); ++ q_data->eos_buffer_in_use = true; ++ ++ q_data->eos_buffer.mmal.buffer_size = 0; ++ q_data->eos_buffer.mmal.length = 0; ++ q_data->eos_buffer.mmal.mmal_flags = ++ MMAL_BUFFER_HEADER_FLAG_EOS; ++ q_data->eos_buffer.mmal.pts = 0; ++ q_data->eos_buffer.mmal.dts = 0; ++ ++ if (!ctx->component) ++ break; ++ ++ ret = vchiq_mmal_submit_buffer(ctx->dev->instance, ++ &ctx->component->input[0], ++ &q_data->eos_buffer.mmal); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, ++ "%s: EOS buffer submit failed %d\n", ++ __func__, ret); ++ ++ break; ++ ++ case V4L2_DEC_CMD_START: ++ /* Do we need to do anything here? */ ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int vidioc_try_encoder_cmd(struct file *file, void *priv, ++ struct v4l2_encoder_cmd *cmd) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ ++ if (ctx->dev->decode) ++ return -EINVAL; ++ ++ switch (cmd->cmd) { ++ case V4L2_ENC_CMD_STOP: ++ break; ++ ++ case V4L2_ENC_CMD_START: ++ /* Do we need to do anything here? */ ++ break; ++ default: ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++static int vidioc_encoder_cmd(struct file *file, void *priv, ++ struct v4l2_encoder_cmd *cmd) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ struct bcm2835_codec_q_data *q_data = &ctx->q_data[V4L2_M2M_SRC]; ++ int ret; ++ ++ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s, cmd %u", __func__, ++ cmd->cmd); ++ ret = vidioc_try_encoder_cmd(file, priv, cmd); ++ if (ret) ++ return ret; ++ ++ switch (cmd->cmd) { ++ case V4L2_ENC_CMD_STOP: ++ if (q_data->eos_buffer_in_use) ++ v4l2_err(&ctx->dev->v4l2_dev, "EOS buffers already in use\n"); ++ q_data->eos_buffer_in_use = true; ++ ++ q_data->eos_buffer.mmal.buffer_size = 0; ++ q_data->eos_buffer.mmal.length = 0; ++ q_data->eos_buffer.mmal.mmal_flags = ++ MMAL_BUFFER_HEADER_FLAG_EOS; ++ q_data->eos_buffer.mmal.pts = 0; ++ q_data->eos_buffer.mmal.dts = 0; ++ ++ if (!ctx->component) ++ break; ++ ++ ret = vchiq_mmal_submit_buffer(ctx->dev->instance, ++ &ctx->component->input[0], ++ &q_data->eos_buffer.mmal); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, ++ "%s: EOS buffer submit failed %d\n", ++ __func__, ret); ++ ++ break; ++ case V4L2_ENC_CMD_START: ++ /* Do we need to do anything here? */ ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static const struct v4l2_ioctl_ops bcm2835_codec_ioctl_ops = { ++ .vidioc_querycap = vidioc_querycap, ++ ++ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, ++ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, ++ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, ++ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, ++ ++ .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, ++ .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, ++ .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, ++ .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, ++ ++ .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, ++ .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, ++ .vidioc_qbuf = v4l2_m2m_ioctl_qbuf, ++ .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf, ++ .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf, ++ .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs, ++ .vidioc_expbuf = v4l2_m2m_ioctl_expbuf, ++ ++ .vidioc_streamon = v4l2_m2m_ioctl_streamon, ++ .vidioc_streamoff = v4l2_m2m_ioctl_streamoff, ++ ++ .vidioc_g_selection = vidioc_g_selection, ++ .vidioc_s_selection = vidioc_s_selection, ++ ++ .vidioc_subscribe_event = vidioc_subscribe_evt, ++ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, ++ ++ .vidioc_decoder_cmd = vidioc_decoder_cmd, ++ .vidioc_try_decoder_cmd = vidioc_try_decoder_cmd, ++ .vidioc_encoder_cmd = vidioc_encoder_cmd, ++ .vidioc_try_encoder_cmd = vidioc_try_encoder_cmd, ++}; ++ ++static int bcm2835_codec_set_ctrls(struct bcm2835_codec_ctx *ctx) ++{ ++ /* ++ * Query the control handler for the value of the various controls and ++ * set them. ++ */ ++ const u32 control_ids[] = { ++ V4L2_CID_MPEG_VIDEO_BITRATE_MODE, ++ V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER, ++ V4L2_CID_MPEG_VIDEO_H264_I_PERIOD, ++ V4L2_CID_MPEG_VIDEO_H264_LEVEL, ++ V4L2_CID_MPEG_VIDEO_H264_PROFILE, ++ }; ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(control_ids); i++) { ++ struct v4l2_ctrl *ctrl; ++ ++ ctrl = v4l2_ctrl_find(&ctx->hdl, control_ids[i]); ++ if (ctrl) ++ bcm2835_codec_s_ctrl(ctrl); ++ } ++ ++ return 0; ++} ++ ++static int bcm2835_codec_create_component(struct bcm2835_codec_ctx *ctx) ++{ ++ struct bcm2835_codec_dev *dev = ctx->dev; ++ unsigned int enable = 1; ++ int ret; ++ ++ ret = vchiq_mmal_component_init(dev->instance, dev->decode ? ++ "ril.video_decode" : "ril.video_encode", ++ &ctx->component); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, "%s: failed to create component for %s\n", ++ __func__, dev->decode ? "decode" : "encode"); ++ return -ENOMEM; ++ } ++ ++ vchiq_mmal_port_parameter_set(dev->instance, &ctx->component->input[0], ++ MMAL_PARAMETER_ZERO_COPY, &enable, ++ sizeof(enable)); ++ vchiq_mmal_port_parameter_set(dev->instance, &ctx->component->output[0], ++ MMAL_PARAMETER_ZERO_COPY, &enable, ++ sizeof(enable)); ++ ++ setup_mmal_port_format(ctx, dev->decode, &ctx->q_data[V4L2_M2M_SRC], ++ &ctx->component->input[0]); ++ ++ setup_mmal_port_format(ctx, dev->decode, &ctx->q_data[V4L2_M2M_DST], ++ &ctx->component->output[0]); ++ ++ ret = vchiq_mmal_port_set_format(dev->instance, ++ &ctx->component->input[0]); ++ if (ret < 0) ++ goto destroy_component; ++ ++ ret = vchiq_mmal_port_set_format(dev->instance, ++ &ctx->component->output[0]); ++ if (ret < 0) ++ goto destroy_component; ++ ++ if (dev->decode) { ++ if (ctx->q_data[V4L2_M2M_DST].sizeimage < ++ ctx->component->output[0].minimum_buffer.size) ++ v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", ++ ctx->q_data[V4L2_M2M_DST].sizeimage, ++ ctx->component->output[0].minimum_buffer.size); ++ } else { ++ if (ctx->q_data[V4L2_M2M_SRC].sizeimage < ++ ctx->component->output[0].minimum_buffer.size) ++ v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", ++ ctx->q_data[V4L2_M2M_SRC].sizeimage, ++ ctx->component->output[0].minimum_buffer.size); ++ ++ /* Now we have a component we can set all the ctrls */ ++ bcm2835_codec_set_ctrls(ctx); ++ } ++ ++ return 0; ++ ++destroy_component: ++ vchiq_mmal_component_finalise(ctx->dev->instance, ctx->component); ++ ++ return ret; ++} ++ ++/* ++ * Queue operations ++ */ ++ ++static int bcm2835_codec_queue_setup(struct vb2_queue *vq, ++ unsigned int *nbuffers, ++ unsigned int *nplanes, ++ unsigned int sizes[], ++ struct device *alloc_devs[]) ++{ ++ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vq); ++ struct bcm2835_codec_q_data *q_data; ++ struct vchiq_mmal_port *port; ++ unsigned int size; ++ ++ q_data = get_q_data(ctx, vq->type); ++ if (!q_data) ++ return -EINVAL; ++ ++ if (!ctx->component) ++ if (bcm2835_codec_create_component(ctx)) ++ return -EINVAL; ++ ++ port = get_port_data(ctx, vq->type); ++ ++ size = q_data->sizeimage; ++ ++ if (*nplanes) ++ return sizes[0] < size ? -EINVAL : 0; ++ ++ *nplanes = 1; ++ ++ sizes[0] = size; ++ port->current_buffer.size = size; ++ ++ if (*nbuffers < port->minimum_buffer.num) ++ *nbuffers = port->minimum_buffer.num; ++ /* Add one buffer to take an EOS */ ++ port->current_buffer.num = *nbuffers + 1; ++ ++ return 0; ++} ++ ++static int bcm2835_codec_buf_init(struct vb2_buffer *vb) ++{ ++ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); ++ struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); ++ struct v4l2_m2m_buffer *m2m = container_of(vb2, struct v4l2_m2m_buffer, ++ vb); ++ struct m2m_mmal_buffer *buf = container_of(m2m, struct m2m_mmal_buffer, ++ m2m); ++ ++ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: ctx:%p, vb %p\n", ++ __func__, ctx, vb); ++ buf->mmal.buffer = vb2_plane_vaddr(&buf->m2m.vb.vb2_buf, 0); ++ buf->mmal.buffer_size = vb2_plane_size(&buf->m2m.vb.vb2_buf, 0); ++ ++ mmal_vchi_buffer_init(ctx->dev->instance, &buf->mmal); ++ ++ return 0; ++} ++ ++static int bcm2835_codec_buf_prepare(struct vb2_buffer *vb) ++{ ++ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); ++ struct bcm2835_codec_q_data *q_data; ++ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); ++ struct v4l2_m2m_buffer *m2m = container_of(vbuf, struct v4l2_m2m_buffer, ++ vb); ++ struct m2m_mmal_buffer *buf = container_of(m2m, struct m2m_mmal_buffer, ++ m2m); ++ int ret; ++ ++ v4l2_dbg(4, debug, &ctx->dev->v4l2_dev, "%s: type: %d ptr %p\n", ++ __func__, vb->vb2_queue->type, vb); ++ ++ q_data = get_q_data(ctx, vb->vb2_queue->type); ++ if (V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { ++ if (vbuf->field == V4L2_FIELD_ANY) ++ vbuf->field = V4L2_FIELD_NONE; ++ if (vbuf->field != V4L2_FIELD_NONE) { ++ v4l2_err(&ctx->dev->v4l2_dev, "%s field isn't supported\n", ++ __func__); ++ return -EINVAL; ++ } ++ } ++ ++ if (vb2_plane_size(vb, 0) < q_data->sizeimage) { ++ v4l2_err(&ctx->dev->v4l2_dev, "%s data will not fit into plane (%lu < %lu)\n", ++ __func__, vb2_plane_size(vb, 0), ++ (long)q_data->sizeimage); ++ return -EINVAL; ++ } ++ ++ if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) ++ vb2_set_plane_payload(vb, 0, q_data->sizeimage); ++ ++ /* ++ * We want to do this at init, but vb2_core_expbuf checks that the ++ * index < q->num_buffers, and q->num_buffers only gets updated once ++ * all the buffers are allocated. ++ */ ++ if (!buf->mmal.dma_buf) { ++ ret = vb2_core_expbuf_dmabuf(vb->vb2_queue, ++ vb->vb2_queue->type, vb->index, 0, ++ O_CLOEXEC, &buf->mmal.dma_buf); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed to expbuf idx %d, ret %d\n", ++ __func__, vb->index, ret); ++ } else { ++ ret = 0; ++ } ++ ++ return ret; ++} ++ ++static void bcm2835_codec_buf_queue(struct vb2_buffer *vb) ++{ ++ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); ++ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); ++ ++ v4l2_dbg(4, debug, &ctx->dev->v4l2_dev, "%s: type: %d ptr %p vbuf->flags %u, seq %u, bytesused %u\n", ++ __func__, vb->vb2_queue->type, vb, vbuf->flags, vbuf->sequence, ++ vb->planes[0].bytesused); ++ v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf); ++} ++ ++static void bcm2835_codec_buffer_cleanup(struct vb2_buffer *vb) ++{ ++ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); ++ struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); ++ struct v4l2_m2m_buffer *m2m = container_of(vb2, struct v4l2_m2m_buffer, ++ vb); ++ struct m2m_mmal_buffer *buf = container_of(m2m, struct m2m_mmal_buffer, ++ m2m); ++ ++ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: ctx:%p, vb %p\n", ++ __func__, ctx, vb); ++ ++ mmal_vchi_buffer_cleanup(&buf->mmal); ++ ++ if (buf->mmal.dma_buf) { ++ dma_buf_put(buf->mmal.dma_buf); ++ buf->mmal.dma_buf = NULL; ++ } ++} ++ ++static int bcm2835_codec_start_streaming(struct vb2_queue *q, ++ unsigned int count) ++{ ++ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(q); ++ struct bcm2835_codec_dev *dev = ctx->dev; ++ struct bcm2835_codec_q_data *q_data = get_q_data(ctx, q->type); ++ int ret; ++ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: type: %d count %d\n", ++ __func__, q->type, count); ++ q_data->sequence = 0; ++ ++ if (!ctx->component_enabled) { ++ ret = vchiq_mmal_component_enable(dev->instance, ++ ctx->component); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed enabling component, ret %d\n", ++ __func__, ret); ++ ctx->component_enabled = true; ++ } ++ ++ if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { ++ /* ++ * Create the EOS buffer. ++ * We only need the MMAL part, and want to NOT attach a memory ++ * buffer to it as it should only take flags. ++ */ ++ memset(&q_data->eos_buffer, 0, sizeof(q_data->eos_buffer)); ++ mmal_vchi_buffer_init(dev->instance, ++ &q_data->eos_buffer.mmal); ++ q_data->eos_buffer_in_use = false; ++ ++ ctx->component->input[0].cb_ctx = ctx; ++ ret = vchiq_mmal_port_enable(dev->instance, ++ &ctx->component->input[0], ++ ip_buffer_cb); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed enabling i/p port, ret %d\n", ++ __func__, ret); ++ } else { ++ ctx->component->output[0].cb_ctx = ctx; ++ ret = vchiq_mmal_port_enable(dev->instance, ++ &ctx->component->output[0], ++ op_buffer_cb); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed enabling o/p port, ret %d\n", ++ __func__, ret); ++ } ++ return ret; ++} ++ ++static void bcm2835_codec_stop_streaming(struct vb2_queue *q) ++{ ++ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(q); ++ struct bcm2835_codec_dev *dev = ctx->dev; ++ struct bcm2835_codec_q_data *q_data = get_q_data(ctx, q->type); ++ struct vchiq_mmal_port *port = get_port_data(ctx, q->type); ++ struct vb2_v4l2_buffer *vbuf; ++ struct vb2_v4l2_buffer *vb2; ++ struct v4l2_m2m_buffer *m2m; ++ struct m2m_mmal_buffer *buf; ++ int ret, i; ++ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: type: %d - return buffers\n", ++ __func__, q->type); ++ ++ init_completion(&ctx->frame_cmplt); ++ ++ /* Clear out all buffers held by m2m framework */ ++ for (;;) { ++ if (V4L2_TYPE_IS_OUTPUT(q->type)) ++ vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); ++ else ++ vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); ++ if (!vbuf) ++ break; ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: return buffer %p\n", ++ __func__, vbuf); ++ ++ v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR); ++ } ++ ++ /* Disable MMAL port - this will flush buffers back */ ++ ret = vchiq_mmal_port_disable(dev->instance, port); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed disabling %s port, ret %d\n", ++ __func__, V4L2_TYPE_IS_OUTPUT(q->type) ? "i/p" : "o/p", ++ ret); ++ ++ while (atomic_read(&port->buffers_with_vpu)) { ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Waiting for buffers to be returned - %d outstanding\n", ++ __func__, atomic_read(&port->buffers_with_vpu)); ++ ret = wait_for_completion_timeout(&ctx->frame_cmplt, HZ); ++ if (ret <= 0) { ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Timeout waiting for buffers to be returned - %d outstanding\n", ++ __func__, ++ atomic_read(&port->buffers_with_vpu)); ++ break; ++ } ++ } ++ ++ /* ++ * Release the VCSM handle here as otherwise REQBUFS(0) aborts because ++ * someone is using the dmabuf before giving the driver a chance to do ++ * anything about it. ++ */ ++ for (i = 0; i < q->num_buffers; i++) { ++ vb2 = to_vb2_v4l2_buffer(q->bufs[i]); ++ m2m = container_of(vb2, struct v4l2_m2m_buffer, vb); ++ buf = container_of(m2m, struct m2m_mmal_buffer, m2m); ++ ++ mmal_vchi_buffer_cleanup(&buf->mmal); ++ if (buf->mmal.dma_buf) { ++ dma_buf_put(buf->mmal.dma_buf); ++ buf->mmal.dma_buf = NULL; ++ } ++ } ++ ++ /* If both ports disabled, then disable the component */ ++ if (!ctx->component->input[0].enabled && ++ !ctx->component->output[0].enabled) { ++ ret = vchiq_mmal_component_disable(dev->instance, ++ ctx->component); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed enabling component, ret %d\n", ++ __func__, ret); ++ } ++ ++ if (V4L2_TYPE_IS_OUTPUT(q->type)) ++ mmal_vchi_buffer_cleanup(&q_data->eos_buffer.mmal); ++ ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: done\n", __func__); ++} ++ ++static const struct vb2_ops bcm2835_codec_qops = { ++ .queue_setup = bcm2835_codec_queue_setup, ++ .buf_init = bcm2835_codec_buf_init, ++ .buf_prepare = bcm2835_codec_buf_prepare, ++ .buf_queue = bcm2835_codec_buf_queue, ++ .buf_cleanup = bcm2835_codec_buffer_cleanup, ++ .start_streaming = bcm2835_codec_start_streaming, ++ .stop_streaming = bcm2835_codec_stop_streaming, ++ .wait_prepare = vb2_ops_wait_prepare, ++ .wait_finish = vb2_ops_wait_finish, ++}; ++ ++static int queue_init(void *priv, struct vb2_queue *src_vq, ++ struct vb2_queue *dst_vq) ++{ ++ struct bcm2835_codec_ctx *ctx = priv; ++ int ret; ++ ++ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; ++ src_vq->io_modes = VB2_MMAP | VB2_DMABUF; ++ src_vq->drv_priv = ctx; ++ src_vq->buf_struct_size = sizeof(struct m2m_mmal_buffer); ++ src_vq->ops = &bcm2835_codec_qops; ++ src_vq->mem_ops = &vb2_dma_contig_memops; ++ src_vq->dev = &ctx->dev->pdev->dev; ++ src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; ++ src_vq->lock = &ctx->dev->dev_mutex; ++ ++ ret = vb2_queue_init(src_vq); ++ if (ret) ++ return ret; ++ ++ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ dst_vq->io_modes = VB2_MMAP | VB2_DMABUF; ++ dst_vq->drv_priv = ctx; ++ dst_vq->buf_struct_size = sizeof(struct m2m_mmal_buffer); ++ dst_vq->ops = &bcm2835_codec_qops; ++ dst_vq->mem_ops = &vb2_dma_contig_memops; ++ dst_vq->dev = &ctx->dev->pdev->dev; ++ dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; ++ dst_vq->lock = &ctx->dev->dev_mutex; ++ ++ return vb2_queue_init(dst_vq); ++} ++ ++/* ++ * File operations ++ */ ++static int bcm2835_codec_open(struct file *file) ++{ ++ struct bcm2835_codec_dev *dev = video_drvdata(file); ++ struct bcm2835_codec_ctx *ctx = NULL; ++ struct v4l2_ctrl_handler *hdl; ++ int rc = 0; ++ ++ v4l2_dbg(1, debug, &dev->v4l2_dev, "Creating instance for %s\n", ++ dev->decode ? "decode" : "encode"); ++ if (mutex_lock_interruptible(&dev->dev_mutex)) { ++ v4l2_err(&dev->v4l2_dev, "Mutex fail\n"); ++ return -ERESTARTSYS; ++ } ++ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); ++ if (!ctx) { ++ rc = -ENOMEM; ++ goto open_unlock; ++ } ++ ++ ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev->decode, false); ++ ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev->decode, true); ++ if (dev->decode) { ++ /* ++ * Input width and height are irrelevant as they will be defined ++ * by the bitstream not the format. Required by V4L2 though. ++ */ ++ ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; ++ ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_SRC].bytesperline = 0; ++ ctx->q_data[V4L2_M2M_SRC].sizeimage = ++ DEF_COMP_BUF_SIZE_720P_OR_LESS; ++ ++ ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; ++ ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_DST].bytesperline = ++ get_bytesperline(DEFAULT_WIDTH, ++ ctx->q_data[V4L2_M2M_DST].fmt); ++ ctx->q_data[V4L2_M2M_DST].sizeimage = ++ get_sizeimage(ctx->q_data[V4L2_M2M_DST].bytesperline, ++ ctx->q_data[V4L2_M2M_DST].height, ++ ctx->q_data[V4L2_M2M_DST].fmt); ++ } else { ++ ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; ++ ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_SRC].bytesperline = ++ get_bytesperline(DEFAULT_WIDTH, ++ ctx->q_data[V4L2_M2M_SRC].fmt); ++ ctx->q_data[V4L2_M2M_SRC].sizeimage = ++ get_sizeimage(ctx->q_data[V4L2_M2M_SRC].bytesperline, ++ ctx->q_data[V4L2_M2M_SRC].height, ++ ctx->q_data[V4L2_M2M_SRC].fmt); ++ ++ ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; ++ ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_DST].bytesperline = 0; ++ ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_DST].sizeimage = ++ DEF_COMP_BUF_SIZE_720P_OR_LESS; ++ } ++ ++ ctx->colorspace = V4L2_COLORSPACE_REC709; ++ ctx->bitrate = 10 * 1000 * 1000; ++ ++ /* Initialise V4L2 contexts */ ++ v4l2_fh_init(&ctx->fh, video_devdata(file)); ++ file->private_data = &ctx->fh; ++ ctx->dev = dev; ++ hdl = &ctx->hdl; ++ if (!dev->decode) { ++ /* Encode controls */ ++ v4l2_ctrl_handler_init(hdl, 6); ++ ++ v4l2_ctrl_new_std_menu(hdl, &bcm2835_codec_ctrl_ops, ++ V4L2_CID_MPEG_VIDEO_BITRATE_MODE, ++ V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0, ++ V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); ++ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, ++ V4L2_CID_MPEG_VIDEO_BITRATE, ++ 25 * 1000, 25 * 1000 * 1000, ++ 25 * 1000, 10 * 1000 * 1000); ++ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, ++ V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER, ++ 0, 1, ++ 1, 0); ++ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, ++ V4L2_CID_MPEG_VIDEO_H264_I_PERIOD, ++ 0, 0x7FFFFFFF, ++ 1, 60); ++ v4l2_ctrl_new_std_menu(hdl, &bcm2835_codec_ctrl_ops, ++ V4L2_CID_MPEG_VIDEO_H264_LEVEL, ++ V4L2_MPEG_VIDEO_H264_LEVEL_4_2, ++ ~(BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_0) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1B) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_1) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_2) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_3) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_2_0) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_2_1) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_2_2) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_3_0) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_3_1) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_3_2) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_4_0) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_4_1) | ++ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_4_2)), ++ V4L2_MPEG_VIDEO_H264_LEVEL_4_0); ++ v4l2_ctrl_new_std_menu(hdl, &bcm2835_codec_ctrl_ops, ++ V4L2_CID_MPEG_VIDEO_H264_PROFILE, ++ V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, ++ ~(BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) | ++ BIT(V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE) | ++ BIT(V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) | ++ BIT(V4L2_MPEG_VIDEO_H264_PROFILE_HIGH)), ++ V4L2_MPEG_VIDEO_H264_PROFILE_HIGH); ++ if (hdl->error) { ++ rc = hdl->error; ++ goto free_ctrl_handler; ++ } ++ ctx->fh.ctrl_handler = hdl; ++ v4l2_ctrl_handler_setup(hdl); ++ } ++ ++ ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); ++ ++ if (IS_ERR(ctx->fh.m2m_ctx)) { ++ rc = PTR_ERR(ctx->fh.m2m_ctx); ++ ++ goto free_ctrl_handler; ++ } ++ ++ /* Set both queues as buffered as we have buffering in the VPU. That ++ * means that we will be scheduled whenever either an input or output ++ * buffer is available (otherwise one of each are required). ++ */ ++ v4l2_m2m_set_src_buffered(ctx->fh.m2m_ctx, true); ++ v4l2_m2m_set_dst_buffered(ctx->fh.m2m_ctx, true); ++ ++ v4l2_fh_add(&ctx->fh); ++ atomic_inc(&dev->num_inst); ++ ++ mutex_unlock(&dev->dev_mutex); ++ return 0; ++ ++free_ctrl_handler: ++ v4l2_ctrl_handler_free(hdl); ++ kfree(ctx); ++open_unlock: ++ mutex_unlock(&dev->dev_mutex); ++ return rc; ++} ++ ++static int bcm2835_codec_release(struct file *file) ++{ ++ struct bcm2835_codec_dev *dev = video_drvdata(file); ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ ++ v4l2_dbg(1, debug, &dev->v4l2_dev, "%s: Releasing instance %p\n", ++ __func__, ctx); ++ ++ v4l2_fh_del(&ctx->fh); ++ v4l2_fh_exit(&ctx->fh); ++ v4l2_ctrl_handler_free(&ctx->hdl); ++ mutex_lock(&dev->dev_mutex); ++ v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); ++ ++ if (ctx->component) ++ vchiq_mmal_component_finalise(dev->instance, ctx->component); ++ ++ mutex_unlock(&dev->dev_mutex); ++ kfree(ctx); ++ ++ atomic_dec(&dev->num_inst); ++ ++ return 0; ++} ++ ++static const struct v4l2_file_operations bcm2835_codec_fops = { ++ .owner = THIS_MODULE, ++ .open = bcm2835_codec_open, ++ .release = bcm2835_codec_release, ++ .poll = v4l2_m2m_fop_poll, ++ .unlocked_ioctl = video_ioctl2, ++ .mmap = v4l2_m2m_fop_mmap, ++}; ++ ++static const struct video_device bcm2835_codec_videodev = { ++ .name = MEM2MEM_NAME, ++ .vfl_dir = VFL_DIR_M2M, ++ .fops = &bcm2835_codec_fops, ++ .ioctl_ops = &bcm2835_codec_ioctl_ops, ++ .minor = -1, ++ .release = video_device_release_empty, ++}; ++ ++static const struct v4l2_m2m_ops m2m_ops = { ++ .device_run = device_run, ++ .job_ready = job_ready, ++ .job_abort = job_abort, ++}; ++ ++static int bcm2835_codec_create(struct platform_device *pdev, ++ struct bcm2835_codec_dev **new_dev, ++ bool decode) ++{ ++ struct bcm2835_codec_dev *dev; ++ struct video_device *vfd; ++ struct vchiq_mmal_instance *instance = NULL; ++ int video_nr; ++ int ret; ++ ++ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); ++ if (!dev) ++ return -ENOMEM; ++ ++ dev->pdev = pdev; ++ ++ dev->decode = decode; ++ ++ ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); ++ if (ret) ++ return ret; ++ ++ atomic_set(&dev->num_inst, 0); ++ mutex_init(&dev->dev_mutex); ++ ++ dev->vfd = bcm2835_codec_videodev; ++ vfd = &dev->vfd; ++ vfd->lock = &dev->dev_mutex; ++ vfd->v4l2_dev = &dev->v4l2_dev; ++ ++ if (dev->decode) { ++ v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD); ++ v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); ++ video_nr = decode_video_nr; ++ } else { ++ v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); ++ v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); ++ video_nr = encode_video_nr; ++ } ++ ++ ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); ++ goto unreg_dev; ++ } ++ ++ video_set_drvdata(vfd, dev); ++ snprintf(vfd->name, sizeof(vfd->name), "%s", ++ bcm2835_codec_videodev.name); ++ v4l2_info(&dev->v4l2_dev, "Device registered as /dev/video%d\n", ++ vfd->num); ++ ++ *new_dev = dev; ++ ++ dev->m2m_dev = v4l2_m2m_init(&m2m_ops); ++ if (IS_ERR(dev->m2m_dev)) { ++ v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n"); ++ ret = PTR_ERR(dev->m2m_dev); ++ goto err_m2m; ++ } ++ ++ ret = vchiq_mmal_init(&instance); ++ if (ret < 0) ++ goto err_m2m; ++ dev->instance = instance; ++ ++ v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s codec\n", ++ dev->decode ? "decode" : "encode"); ++ return 0; ++ ++err_m2m: ++ v4l2_m2m_release(dev->m2m_dev); ++ video_unregister_device(&dev->vfd); ++unreg_dev: ++ v4l2_device_unregister(&dev->v4l2_dev); ++ ++ return ret; ++} ++ ++static int bcm2835_codec_destroy(struct bcm2835_codec_dev *dev) ++{ ++ if (!dev) ++ return -ENODEV; ++ ++ v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME); ++ v4l2_m2m_release(dev->m2m_dev); ++ video_unregister_device(&dev->vfd); ++ v4l2_device_unregister(&dev->v4l2_dev); ++ ++ return 0; ++} ++ ++static int bcm2835_codec_probe(struct platform_device *pdev) ++{ ++ struct bcm2835_codec_driver *drv; ++ int ret = 0; ++ ++ drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); ++ if (!drv) ++ return -ENOMEM; ++ ++ ret = bcm2835_codec_create(pdev, &drv->encode, false); ++ if (ret) ++ goto out; ++ ++ ret = bcm2835_codec_create(pdev, &drv->decode, true); ++ if (ret) ++ goto out; ++ ++ platform_set_drvdata(pdev, drv); ++ ++ return 0; ++ ++out: ++ if (drv->encode) { ++ bcm2835_codec_destroy(drv->encode); ++ drv->encode = NULL; ++ } ++ return ret; ++} ++ ++static int bcm2835_codec_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_codec_driver *drv = platform_get_drvdata(pdev); ++ ++ bcm2835_codec_destroy(drv->encode); ++ ++ bcm2835_codec_destroy(drv->decode); ++ ++ return 0; ++} ++ ++static struct platform_driver bcm2835_v4l2_codec_driver = { ++ .probe = bcm2835_codec_probe, ++ .remove = bcm2835_codec_remove, ++ .driver = { ++ .name = "bcm2835-codec", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++module_platform_driver(bcm2835_v4l2_codec_driver); ++ ++MODULE_DESCRIPTION("BCM2835 codec V4L2 driver"); ++MODULE_AUTHOR("Dave Stevenson, "); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION("0.0.1"); ++MODULE_ALIAS("platform:bcm2835-codec"); diff --git a/target/linux/brcm2708/patches-4.19/950-0256-staging-bcm2835-camera-Unify-header-inclusion-define.patch b/target/linux/brcm2708/patches-4.19/950-0256-staging-bcm2835-camera-Unify-header-inclusion-define.patch deleted file mode 100644 index a218295683..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0256-staging-bcm2835-camera-Unify-header-inclusion-define.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 925b969a16a2e3503803c47a87f093f88d1b2060 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 3 Dec 2018 13:15:20 +0000 -Subject: [PATCH 256/806] staging: bcm2835-camera: Unify header inclusion - defines - -Most of the headers use ifndef FOO_H, whilst mmal-parameters.h -used ifndef __FOO_H. - -Revise mmal-parameters.h to drop the underscores and make the -headers all consistent. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/bcm2835-camera/mmal-parameters.h | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h -@@ -19,8 +19,8 @@ - * @{ - */ - --#ifndef __MMAL_PARAMETERS_H --#define __MMAL_PARAMETERS_H -+#ifndef MMAL_PARAMETERS_H -+#define MMAL_PARAMETERS_H - - /** Common parameter ID group, used with many types of component. */ - #define MMAL_PARAMETER_GROUP_COMMON (0 << 16) diff --git a/target/linux/brcm2708/patches-4.19/950-0256-staging-vchiq_arm-Register-bcm2835-codec-as-a-platfo.patch b/target/linux/brcm2708/patches-4.19/950-0256-staging-vchiq_arm-Register-bcm2835-codec-as-a-platfo.patch new file mode 100644 index 0000000000..c9461eb59d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0256-staging-vchiq_arm-Register-bcm2835-codec-as-a-platfo.patch @@ -0,0 +1,34 @@ +From b28dac3003b4c756b72201bb1d83647e33e2f4f1 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 26 Oct 2018 15:14:16 +0100 +Subject: [PATCH] staging: vchiq_arm: Register bcm2835-codec as a + platform driver + +Following the same pattern as bcm2835-camera and bcm2835-audio, +register the V4L2 codec driver as a platform driver + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -171,6 +171,7 @@ static struct device *vchiq_dev; + static DEFINE_SPINLOCK(msg_queue_spinlock); + static struct platform_device *bcm2835_camera; + static struct platform_device *bcm2835_audio; ++static struct platform_device *bcm2835_codec; + + static const char *const ioctl_names[] = { + "CONNECT", +@@ -3660,6 +3661,9 @@ static int vchiq_probe(struct platform_d + bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio"); + if (IS_ERR(bcm2835_audio)) + bcm2835_audio = NULL; ++ bcm2835_codec = vchiq_register_child(pdev, "bcm2835-codec"); ++ if (IS_ERR(bcm2835_codec)) ++ bcm2835_codec = NULL; + + return 0; + diff --git a/target/linux/brcm2708/patches-4.19/950-0257-staging-vchiq_arm-Register-vcsm-cma-as-a-platform-dr.patch b/target/linux/brcm2708/patches-4.19/950-0257-staging-vchiq_arm-Register-vcsm-cma-as-a-platform-dr.patch new file mode 100644 index 0000000000..d04e261b45 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0257-staging-vchiq_arm-Register-vcsm-cma-as-a-platform-dr.patch @@ -0,0 +1,34 @@ +From 69c5c6d62b457ee88e55c4090dc09c0441b059f2 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 26 Oct 2018 15:19:40 +0100 +Subject: [PATCH] staging: vchiq_arm: Register vcsm-cma as a platform + driver + +Following the same pattern as bcm2835-camera and bcm2835-audio, +register the vcsm-cma driver as a platform driver + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -172,6 +172,7 @@ static DEFINE_SPINLOCK(msg_queue_spinloc + static struct platform_device *bcm2835_camera; + static struct platform_device *bcm2835_audio; + static struct platform_device *bcm2835_codec; ++static struct platform_device *vcsm_cma; + + static const char *const ioctl_names[] = { + "CONNECT", +@@ -3655,6 +3656,9 @@ static int vchiq_probe(struct platform_d + VCHIQ_VERSION, VCHIQ_VERSION_MIN, + MAJOR(vchiq_devid), MINOR(vchiq_devid)); + ++ vcsm_cma = vchiq_register_child(pdev, "vcsm-cma"); ++ if (IS_ERR(vcsm_cma)) ++ vcsm_cma = NULL; + bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); + if (IS_ERR(bcm2835_camera)) + bcm2835_camera = NULL; diff --git a/target/linux/brcm2708/patches-4.19/950-0258-staging-bcm2835-camera-Fix-alignment-should-match-op.patch b/target/linux/brcm2708/patches-4.19/950-0258-staging-bcm2835-camera-Fix-alignment-should-match-op.patch deleted file mode 100644 index 4409708982..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0258-staging-bcm2835-camera-Fix-alignment-should-match-op.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 11129d36669a3efee5dd0d49f969f11c42764f9d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 29 Oct 2018 15:55:42 +0000 -Subject: [PATCH 258/806] staging: bcm2835-camera: Fix alignment should match - open parenthesis - -Fix up checkpatch "Alignment should match open parenthesis" errors - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -1934,7 +1934,7 @@ static int bcm2835_mmal_probe(struct pla - ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler); - if (ret < 0) { - v4l2_err(&dev->v4l2_dev, "%s: could not init controls: %d\n", -- __func__, ret); -+ __func__, ret); - goto unreg_dev; - } - dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler; -@@ -1944,7 +1944,7 @@ static int bcm2835_mmal_probe(struct pla - ret = mmal_init(dev); - if (ret < 0) { - v4l2_err(&dev->v4l2_dev, "%s: mmal init failed: %d\n", -- __func__, ret); -+ __func__, ret); - goto unreg_dev; - } - /* initialize queue */ -@@ -1966,7 +1966,7 @@ static int bcm2835_mmal_probe(struct pla - ret = bm2835_mmal_init_device(dev, &dev->vdev); - if (ret < 0) { - v4l2_err(&dev->v4l2_dev, "%s: could not init device: %d\n", -- __func__, ret); -+ __func__, ret); - goto unreg_dev; - } - -@@ -1976,7 +1976,7 @@ static int bcm2835_mmal_probe(struct pla - ret = mmal_setup_components(dev, &default_v4l2_format); - if (ret < 0) { - v4l2_err(&dev->v4l2_dev, "%s: could not setup components: %d\n", -- __func__, ret); -+ __func__, ret); - goto unreg_dev; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0258-staging-bcm2835-camera-Fix-stride-on-RGB3-BGR3-forma.patch b/target/linux/brcm2708/patches-4.19/950-0258-staging-bcm2835-camera-Fix-stride-on-RGB3-BGR3-forma.patch new file mode 100644 index 0000000000..9659b10956 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0258-staging-bcm2835-camera-Fix-stride-on-RGB3-BGR3-forma.patch @@ -0,0 +1,53 @@ +From 69e42b6209062b9cd3fc9aea8fb53ed703509e51 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 30 Nov 2018 16:00:54 +0000 +Subject: [PATCH] staging: bcm2835-camera: Fix stride on RGB3/BGR3 + formats + +RGB3/BGR3 end up being 3 bytes per pixel, which meant that +the alignment code ended up trying to align using bitmasking +with a mask of 96. +That doesn't work, so switch to an arithmetic alignment for +those formats. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/bcm2835-camera.c | 26 ++++++++++++++----- + 1 file changed, 20 insertions(+), 6 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -1008,13 +1008,27 @@ static int vidioc_try_fmt_vid_cap(struct + 1, 0); + f->fmt.pix.bytesperline = f->fmt.pix.width * mfmt->ybbp; + if (!mfmt->remove_padding) { +- int align_mask = ((32 * mfmt->depth) >> 3) - 1; +- /* GPU isn't removing padding, so stride is aligned to 32 */ +- f->fmt.pix.bytesperline = +- (f->fmt.pix.bytesperline + align_mask) & ~align_mask; ++ if (mfmt->depth == 24) { ++ /* ++ * 24bpp is a pain as we can't use simple masking. ++ * Min stride is width aligned to 16, times 24bpp. ++ */ ++ f->fmt.pix.bytesperline = ++ ((f->fmt.pix.width + 15) & ~15) * 3; ++ } else { ++ /* ++ * GPU isn't removing padding, so stride is aligned to ++ * 32 ++ */ ++ int align_mask = ((32 * mfmt->depth) >> 3) - 1; ++ ++ f->fmt.pix.bytesperline = ++ (f->fmt.pix.bytesperline + align_mask) & ++ ~align_mask; ++ } + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, +- "Not removing padding, so bytes/line = %d, (align_mask %d)\n", +- f->fmt.pix.bytesperline, align_mask); ++ "Not removing padding, so bytes/line = %d\n", ++ f->fmt.pix.bytesperline); + } + + /* Image buffer has to be padded to allow for alignment, even though diff --git a/target/linux/brcm2708/patches-4.19/950-0259-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch b/target/linux/brcm2708/patches-4.19/950-0259-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch new file mode 100644 index 0000000000..8bc16911ca --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0259-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch @@ -0,0 +1,76 @@ +From cf6f8129b6af78116e00b1d781e0bcc8c4b73890 Mon Sep 17 00:00:00 2001 +From: John Sheu +Date: Thu, 15 Oct 2015 18:05:25 +0900 +Subject: [PATCH] media: vb2: Allow reqbufs(0) with "in use" MMAP + buffers + +Videobuf2 presently does not allow VIDIOC_REQBUFS to destroy outstanding +buffers if the queue is of type V4L2_MEMORY_MMAP, and if the buffers are +considered "in use". This is different behavior than for other memory +types and prevents us from deallocating buffers in following two cases: + +1) There are outstanding mmap()ed views on the buffer. However even if + we put the buffer in reqbufs(0), there will be remaining references, + due to vma .open/close() adjusting vb2 buffer refcount appropriately. + This means that the buffer will be in fact freed only when the last + mmap()ed view is unmapped. + +2) Buffer has been exported as a DMABUF. Refcount of the vb2 buffer + is managed properly by VB2 DMABUF ops, i.e. incremented on DMABUF + get and decremented on DMABUF release. This means that the buffer + will be alive until all importers release it. + +Considering both cases above, there does not seem to be any need to +prevent reqbufs(0) operation, because buffer lifetime is already +properly managed by both mmap() and DMABUF code paths. Let's remove it +and allow userspace freeing the queue (and potentially allocating a new +one) even though old buffers might be still in processing. + +Signed-off-by: John Sheu +Reviewed-by: Pawel Osciak +Reviewed-by: Tomasz Figa +Signed-off-by: Tomasz Figa +--- + .../media/common/videobuf2/videobuf2-core.c | 23 ------------------- + 1 file changed, 23 deletions(-) + +--- a/drivers/media/common/videobuf2/videobuf2-core.c ++++ b/drivers/media/common/videobuf2/videobuf2-core.c +@@ -554,20 +554,6 @@ bool vb2_buffer_in_use(struct vb2_queue + } + EXPORT_SYMBOL(vb2_buffer_in_use); + +-/* +- * __buffers_in_use() - return true if any buffers on the queue are in use and +- * the queue cannot be freed (by the means of REQBUFS(0)) call +- */ +-static bool __buffers_in_use(struct vb2_queue *q) +-{ +- unsigned int buffer; +- for (buffer = 0; buffer < q->num_buffers; ++buffer) { +- if (vb2_buffer_in_use(q, q->bufs[buffer])) +- return true; +- } +- return false; +-} +- + void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb) + { + call_void_bufop(q, fill_user_buffer, q->bufs[index], pb); +@@ -679,16 +665,7 @@ int vb2_core_reqbufs(struct vb2_queue *q + + if (*count == 0 || q->num_buffers != 0 || + (q->memory != VB2_MEMORY_UNKNOWN && q->memory != memory)) { +- /* +- * We already have buffers allocated, so first check if they +- * are not in use and can be freed. +- */ + mutex_lock(&q->mmap_lock); +- if (q->memory == VB2_MEMORY_MMAP && __buffers_in_use(q)) { +- mutex_unlock(&q->mmap_lock); +- dprintk(1, "memory in use, cannot free\n"); +- return -EBUSY; +- } + + /* + * Call queue_cancel to clean up any buffers in the PREPARED or diff --git a/target/linux/brcm2708/patches-4.19/950-0259-staging-bcm2835-camera-Fix-multiple-assignments-shou.patch b/target/linux/brcm2708/patches-4.19/950-0259-staging-bcm2835-camera-Fix-multiple-assignments-shou.patch deleted file mode 100644 index c9f9e043a3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0259-staging-bcm2835-camera-Fix-multiple-assignments-shou.patch +++ /dev/null @@ -1,30 +0,0 @@ -From d1f9d21346c642fadb2676077b050106afaf7579 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 29 Oct 2018 15:58:14 +0000 -Subject: [PATCH 259/806] staging: bcm2835-camera: Fix multiple assignments - should be avoided - -Clear checkpatch complaints of "multiple assignments should be avoided" - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -1065,11 +1065,12 @@ static int mmal_setup_components(struct - /* Make a further decision on port based on resolution */ - if (f->fmt.pix.width <= max_video_width && - f->fmt.pix.height <= max_video_height) -- camera_port = port = -+ camera_port = - &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]; - else -- camera_port = port = -+ camera_port = - &dev->component[COMP_CAMERA]->output[CAM_PORT_CAPTURE]; -+ port = camera_port; - break; - case COMP_IMAGE_ENCODE: - encode_component = dev->component[COMP_IMAGE_ENCODE]; diff --git a/target/linux/brcm2708/patches-4.19/950-0260-staging-bcm2835-camera-Fix-up-all-formatting-in-mmal.patch b/target/linux/brcm2708/patches-4.19/950-0260-staging-bcm2835-camera-Fix-up-all-formatting-in-mmal.patch deleted file mode 100644 index c497890344..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0260-staging-bcm2835-camera-Fix-up-all-formatting-in-mmal.patch +++ /dev/null @@ -1,336 +0,0 @@ -From be10ef41af683e175521f80b49b99d7ddeac2f2c Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 29 Oct 2018 16:08:41 +0000 -Subject: [PATCH 260/806] staging: bcm2835-camera: Fix up all formatting in - mmal-paramters.h - -Fixes up all checkpatch errors in mmal-parameters.h - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/mmal-parameters.h | 273 +++++++++++------- - 1 file changed, 165 insertions(+), 108 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h -+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h -@@ -23,148 +23,204 @@ - #define MMAL_PARAMETERS_H - - /** Common parameter ID group, used with many types of component. */ --#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) -+#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) - /** Camera-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) -+#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) - /** Video-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) -+#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) - /** Audio-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) -+#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) - /** Clock-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) -+#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) - /** Miracast-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) -+#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) - - /* Common parameters */ - enum mmal_parameter_common_type { -- MMAL_PARAMETER_UNUSED /**< Never a valid parameter ID */ -- = MMAL_PARAMETER_GROUP_COMMON, -- MMAL_PARAMETER_SUPPORTED_ENCODINGS, /**< MMAL_PARAMETER_ENCODING_T */ -- MMAL_PARAMETER_URI, /**< MMAL_PARAMETER_URI_T */ -+ /**< Never a valid parameter ID */ -+ MMAL_PARAMETER_UNUSED = MMAL_PARAMETER_GROUP_COMMON, - -- /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ -+ /**< MMAL_PARAMETER_ENCODING_T */ -+ MMAL_PARAMETER_SUPPORTED_ENCODINGS, -+ /**< MMAL_PARAMETER_URI_T */ -+ MMAL_PARAMETER_URI, -+ /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ - MMAL_PARAMETER_CHANGE_EVENT_REQUEST, -- -- /** MMAL_PARAMETER_BOOLEAN_T */ -+ /** MMAL_PARAMETER_BOOLEAN_T */ - MMAL_PARAMETER_ZERO_COPY, -- -- /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ -+ /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ - MMAL_PARAMETER_BUFFER_REQUIREMENTS, -- -- MMAL_PARAMETER_STATISTICS, /**< MMAL_PARAMETER_STATISTICS_T */ -- MMAL_PARAMETER_CORE_STATISTICS, /**< MMAL_PARAMETER_CORE_STATISTICS_T */ -- MMAL_PARAMETER_MEM_USAGE, /**< MMAL_PARAMETER_MEM_USAGE_T */ -- MMAL_PARAMETER_BUFFER_FLAG_FILTER, /**< MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_SEEK, /**< MMAL_PARAMETER_SEEK_T */ -- MMAL_PARAMETER_POWERMON_ENABLE, /**< MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_LOGGING, /**< MMAL_PARAMETER_LOGGING_T */ -- MMAL_PARAMETER_SYSTEM_TIME, /**< MMAL_PARAMETER_UINT64_T */ -- MMAL_PARAMETER_NO_IMAGE_PADDING /**< MMAL_PARAMETER_BOOLEAN_T */ -+ /**< MMAL_PARAMETER_STATISTICS_T */ -+ MMAL_PARAMETER_STATISTICS, -+ /**< MMAL_PARAMETER_CORE_STATISTICS_T */ -+ MMAL_PARAMETER_CORE_STATISTICS, -+ /**< MMAL_PARAMETER_MEM_USAGE_T */ -+ MMAL_PARAMETER_MEM_USAGE, -+ /**< MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_BUFFER_FLAG_FILTER, -+ /**< MMAL_PARAMETER_SEEK_T */ -+ MMAL_PARAMETER_SEEK, -+ /**< MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_POWERMON_ENABLE, -+ /**< MMAL_PARAMETER_LOGGING_T */ -+ MMAL_PARAMETER_LOGGING, -+ /**< MMAL_PARAMETER_UINT64_T */ -+ MMAL_PARAMETER_SYSTEM_TIME, -+ /**< MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_NO_IMAGE_PADDING, - }; - - /* camera parameters */ - - enum mmal_parameter_camera_type { - /* 0 */ -- /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ -- MMAL_PARAMETER_THUMBNAIL_CONFIGURATION -- = MMAL_PARAMETER_GROUP_CAMERA, -- MMAL_PARAMETER_CAPTURE_QUALITY, /**< Unused? */ -- MMAL_PARAMETER_ROTATION, /**< @ref MMAL_PARAMETER_INT32_T */ -- MMAL_PARAMETER_EXIF_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_EXIF, /**< @ref MMAL_PARAMETER_EXIF_T */ -- MMAL_PARAMETER_AWB_MODE, /**< @ref MMAL_PARAM_AWBMODE_T */ -- MMAL_PARAMETER_IMAGE_EFFECT, /**< @ref MMAL_PARAMETER_IMAGEFX_T */ -- MMAL_PARAMETER_COLOUR_EFFECT, /**< @ref MMAL_PARAMETER_COLOURFX_T */ -- MMAL_PARAMETER_FLICKER_AVOID, /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ -- MMAL_PARAMETER_FLASH, /**< @ref MMAL_PARAMETER_FLASH_T */ -- MMAL_PARAMETER_REDEYE, /**< @ref MMAL_PARAMETER_REDEYE_T */ -- MMAL_PARAMETER_FOCUS, /**< @ref MMAL_PARAMETER_FOCUS_T */ -- MMAL_PARAMETER_FOCAL_LENGTHS, /**< Unused? */ -- MMAL_PARAMETER_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ -- MMAL_PARAMETER_ZOOM, /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ -- MMAL_PARAMETER_MIRROR, /**< @ref MMAL_PARAMETER_MIRROR_T */ -+ /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ -+ MMAL_PARAMETER_THUMBNAIL_CONFIGURATION = -+ MMAL_PARAMETER_GROUP_CAMERA, -+ /**< Unused? */ -+ MMAL_PARAMETER_CAPTURE_QUALITY, -+ /**< @ref MMAL_PARAMETER_INT32_T */ -+ MMAL_PARAMETER_ROTATION, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_EXIF_DISABLE, -+ /**< @ref MMAL_PARAMETER_EXIF_T */ -+ MMAL_PARAMETER_EXIF, -+ /**< @ref MMAL_PARAM_AWBMODE_T */ -+ MMAL_PARAMETER_AWB_MODE, -+ /**< @ref MMAL_PARAMETER_IMAGEFX_T */ -+ MMAL_PARAMETER_IMAGE_EFFECT, -+ /**< @ref MMAL_PARAMETER_COLOURFX_T */ -+ MMAL_PARAMETER_COLOUR_EFFECT, -+ /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ -+ MMAL_PARAMETER_FLICKER_AVOID, -+ /**< @ref MMAL_PARAMETER_FLASH_T */ -+ MMAL_PARAMETER_FLASH, -+ /**< @ref MMAL_PARAMETER_REDEYE_T */ -+ MMAL_PARAMETER_REDEYE, -+ /**< @ref MMAL_PARAMETER_FOCUS_T */ -+ MMAL_PARAMETER_FOCUS, -+ /**< Unused? */ -+ MMAL_PARAMETER_FOCAL_LENGTHS, -+ /**< @ref MMAL_PARAMETER_INT32_T */ -+ MMAL_PARAMETER_EXPOSURE_COMP, -+ /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ -+ MMAL_PARAMETER_ZOOM, -+ /**< @ref MMAL_PARAMETER_MIRROR_T */ -+ MMAL_PARAMETER_MIRROR, - - /* 0x10 */ -- MMAL_PARAMETER_CAMERA_NUM, /**< @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_EXPOSURE_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ -- MMAL_PARAMETER_EXP_METERING_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ -- MMAL_PARAMETER_FOCUS_STATUS, /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ -- MMAL_PARAMETER_CAMERA_CONFIG, /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ -- MMAL_PARAMETER_CAPTURE_STATUS, /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ -- MMAL_PARAMETER_FACE_TRACK, /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ -- MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_JPEG_Q_FACTOR, /**< @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_FRAME_RATE, /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ -- MMAL_PARAMETER_USE_STC, /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ -- MMAL_PARAMETER_CAMERA_INFO, /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ -- MMAL_PARAMETER_VIDEO_STABILISATION, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_FACE_TRACK_RESULTS, /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ -- MMAL_PARAMETER_ENABLE_RAW_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ /**< @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_CAMERA_NUM, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_CAPTURE, -+ /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ -+ MMAL_PARAMETER_EXPOSURE_MODE, -+ /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ -+ MMAL_PARAMETER_EXP_METERING_MODE, -+ /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ -+ MMAL_PARAMETER_FOCUS_STATUS, -+ /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ -+ MMAL_PARAMETER_CAMERA_CONFIG, -+ /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ -+ MMAL_PARAMETER_CAPTURE_STATUS, -+ /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ -+ MMAL_PARAMETER_FACE_TRACK, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, -+ /**< @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_JPEG_Q_FACTOR, -+ /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ -+ MMAL_PARAMETER_FRAME_RATE, -+ /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ -+ MMAL_PARAMETER_USE_STC, -+ /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ -+ MMAL_PARAMETER_CAMERA_INFO, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_STABILISATION, -+ /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ -+ MMAL_PARAMETER_FACE_TRACK_RESULTS, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ENABLE_RAW_CAPTURE, - - /* 0x20 */ -- MMAL_PARAMETER_DPF_FILE, /**< @ref MMAL_PARAMETER_URI_T */ -- MMAL_PARAMETER_ENABLE_DPF_FILE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_DPF_FAIL_IS_FATAL, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_CAPTURE_MODE, /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ -- MMAL_PARAMETER_FOCUS_REGIONS, /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ -- MMAL_PARAMETER_INPUT_CROP, /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ -- MMAL_PARAMETER_SENSOR_INFORMATION, /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ -- MMAL_PARAMETER_FLASH_SELECT, /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ -- MMAL_PARAMETER_FIELD_OF_VIEW, /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ -- MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, /**< @ref MMAL_PARAMETER_DRC_T */ -- MMAL_PARAMETER_ALGORITHM_CONTROL, /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ -- MMAL_PARAMETER_SHARPNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ -- MMAL_PARAMETER_CONTRAST, /**< @ref MMAL_PARAMETER_RATIONAL_T */ -- MMAL_PARAMETER_BRIGHTNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ -- MMAL_PARAMETER_SATURATION, /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ /**< @ref MMAL_PARAMETER_URI_T */ -+ MMAL_PARAMETER_DPF_FILE, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ENABLE_DPF_FILE, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_DPF_FAIL_IS_FATAL, -+ /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ -+ MMAL_PARAMETER_CAPTURE_MODE, -+ /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ -+ MMAL_PARAMETER_FOCUS_REGIONS, -+ /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ -+ MMAL_PARAMETER_INPUT_CROP, -+ /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ -+ MMAL_PARAMETER_SENSOR_INFORMATION, -+ /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ -+ MMAL_PARAMETER_FLASH_SELECT, -+ /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ -+ MMAL_PARAMETER_FIELD_OF_VIEW, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, -+ /**< @ref MMAL_PARAMETER_DRC_T */ -+ MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, -+ /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ -+ MMAL_PARAMETER_ALGORITHM_CONTROL, -+ /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_SHARPNESS, -+ /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_CONTRAST, -+ /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_BRIGHTNESS, -+ /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_SATURATION, - - /* 0x30 */ -- MMAL_PARAMETER_ISO, /**< @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_ANTISHAKE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- -- /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ -+ /**< @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_ISO, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ANTISHAKE, -+ /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ - MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ - MMAL_PARAMETER_CAMERA_BURST_CAPTURE, -- -- /** @ref MMAL_PARAMETER_UINT32_T */ -+ /** @ref MMAL_PARAMETER_UINT32_T */ - MMAL_PARAMETER_CAMERA_MIN_ISO, -- -- /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ -+ /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ - MMAL_PARAMETER_CAMERA_USE_CASE, -- -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ - MMAL_PARAMETER_CAPTURE_STATS_PASS, -- -- /** @ref MMAL_PARAMETER_UINT32_T */ -+ /** @ref MMAL_PARAMETER_UINT32_T */ - MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ - MMAL_PARAMETER_ENABLE_REGISTER_FILE, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ - MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL, -- -- /** @ref MMAL_PARAMETER_CONFIGFILE_T */ -+ /** @ref MMAL_PARAMETER_CONFIGFILE_T */ - MMAL_PARAMETER_CONFIGFILE_REGISTERS, -- -- /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ -+ /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ - MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS, -- MMAL_PARAMETER_JPEG_ATTACH_LOG, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_ZERO_SHUTTER_LAG, /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ -- MMAL_PARAMETER_FPS_RANGE, /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ -- MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_JPEG_ATTACH_LOG, -+ /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ -+ MMAL_PARAMETER_ZERO_SHUTTER_LAG, -+ /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ -+ MMAL_PARAMETER_FPS_RANGE, -+ /**< @ref MMAL_PARAMETER_INT32_T */ -+ MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, - - /* 0x40 */ -- MMAL_PARAMETER_SW_SHARPEN_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_FLASH_REQUIRED, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_SW_SATURATION_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_SHUTTER_SPEED, /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_CUSTOM_AWB_GAINS, /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_SW_SHARPEN_DISABLE, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_FLASH_REQUIRED, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_SW_SATURATION_DISABLE, -+ /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_SHUTTER_SPEED, -+ /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ -+ MMAL_PARAMETER_CUSTOM_AWB_GAINS, - }; - - struct mmal_parameter_rational { -@@ -411,7 +467,8 @@ enum mmal_parameter_video_type { - MMAL_PARAMETER_MINIMISE_FRAGMENTATION, - - /** @ref MMAL_PARAMETER_UINT32_T. -- * Setting the value to zero resets to the default (one slice per frame). -+ * Setting the value to zero resets to the default (one slice per -+ * frame). - */ - MMAL_PARAMETER_MB_ROWS_PER_SLICE, - diff --git a/target/linux/brcm2708/patches-4.19/950-0260-tpm-Make-SECURITYFS-a-weak-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0260-tpm-Make-SECURITYFS-a-weak-dependency.patch new file mode 100644 index 0000000000..7e86b09840 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0260-tpm-Make-SECURITYFS-a-weak-dependency.patch @@ -0,0 +1,35 @@ +From 38e82adecd1b7ae790a827c29e954d35a2bbee98 Mon Sep 17 00:00:00 2001 +From: Peter Huewe +Date: Mon, 3 Sep 2018 21:51:51 +0200 +Subject: [PATCH] tpm: Make SECURITYFS a weak dependency + +commit 2f7d8dbb11287cbe9da6380ca14ed5d38c9ed91f upstream. + +While having SECURITYFS enabled for the tpm subsystem is beneficial in +most cases, it is not strictly necessary to have it enabled at all. +Especially on platforms without any boot firmware integration of the TPM +(e.g. raspberry pi) it does not add any value for the tpm subsystem, +as there is no eventlog present. + +By turning it from 'select' to 'imply' it still gets selected per +default, but enables users who want to save some kb of ram by turning +SECURITYFS off. + +Signed-off-by: Peter Huewe +Reviewed-by: Jarkko Sakkinen +Signed-off-by: Jarkko Sakkinen +--- + drivers/char/tpm/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/char/tpm/Kconfig ++++ b/drivers/char/tpm/Kconfig +@@ -5,7 +5,7 @@ + menuconfig TCG_TPM + tristate "TPM Hardware Support" + depends on HAS_IOMEM +- select SECURITYFS ++ imply SECURITYFS + select CRYPTO + select CRYPTO_HASH_INFO + ---help--- diff --git a/target/linux/brcm2708/patches-4.19/950-0261-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch b/target/linux/brcm2708/patches-4.19/950-0261-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch new file mode 100644 index 0000000000..16539aa305 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0261-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch @@ -0,0 +1,92 @@ +From 82298c670f768f392f48526fe7c8a93682e83998 Mon Sep 17 00:00:00 2001 +From: Peter Huewe +Date: Thu, 14 Jun 2018 22:51:24 +0200 +Subject: [PATCH] Add overlay for SLB9760 Iridium /LetsTrust TPM + +Device Tree overlay for the Infineon SLB9670 Trusted Platform Module add-on +boards, which can be used as a secure key storage and hwrng. +available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by +pi3g. + +Signed-off-by: Peter Huewe +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 8 ++++ + .../boot/dts/overlays/tpm-slb9670-overlay.dts | 44 +++++++++++++++++++ + 3 files changed, 53 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -137,6 +137,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + tc358743.dtbo \ + tc358743-audio.dtbo \ + tinylcd35.dtbo \ ++ tpm-slb9670.dtbo \ + uart0.dtbo \ + uart1.dtbo \ + upstream.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -2012,6 +2012,14 @@ Params: speed Display + dtoverlay=tinylcd35,touch,touchgpio=3 + + ++Name: tpm-slb9670 ++Info: Enables support for Infineon SLB9670 Trusted Platform Module add-on ++ boards, which can be used as a secure key storage and hwrng, ++ available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. ++Load: dtoverlay=tpm-slb9670 ++Params: ++ ++ + Name: uart0 + Info: Change the pin usage of uart0 + Load: dtoverlay=uart0,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts +@@ -0,0 +1,44 @@ ++/* ++ * Device Tree overlay for the Infineon SLB9670 Trusted Platform Module add-on ++ * boards, which can be used as a secure key storage and hwrng. ++ * available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ slb9670: slb9670@1 { ++ compatible = "infineon,slb9670"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <32000000>; ++ status = "okay"; ++ }; ++ ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0261-staging-bcm2835-camera-Use-enums-for-max-value-in-co.patch b/target/linux/brcm2708/patches-4.19/950-0261-staging-bcm2835-camera-Use-enums-for-max-value-in-co.patch deleted file mode 100644 index ca4f0470bb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0261-staging-bcm2835-camera-Use-enums-for-max-value-in-co.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 316725374b7c221f5d43b31ee9cbe738d3df4709 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 28 Sep 2018 10:17:11 +0100 -Subject: [PATCH 261/806] staging: bcm2835-camera: Use enums for max value in - controls - -Controls of type MMAL_CONTROL_TYPE_STD_MENU call v4l2_ctrl_new_std_menu -with a max value and a mask. The max value is one of the defined -values for the control, however in the config array there are several -entries where raw numbers have been used instead. Replace these -with the appropriate enum. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-camera/controls.c | 37 +++++++------------ - 1 file changed, 13 insertions(+), 24 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -58,19 +58,6 @@ static const uint32_t iso_values[] = { - 0, 100, 200, 400, 800, - }; - --static const s64 mains_freq_qmenu[] = { -- V4L2_CID_POWER_LINE_FREQUENCY_DISABLED, -- V4L2_CID_POWER_LINE_FREQUENCY_50HZ, -- V4L2_CID_POWER_LINE_FREQUENCY_60HZ, -- V4L2_CID_POWER_LINE_FREQUENCY_AUTO --}; -- --/* Supported video encode modes */ --static const s64 bitrate_mode_qmenu[] = { -- (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, -- (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, --}; -- - enum bm2835_mmal_ctrl_type { - MMAL_CONTROL_TYPE_STD, - MMAL_CONTROL_TYPE_STD_MENU, -@@ -966,8 +953,8 @@ static const struct bm2835_mmal_v4l2_ctr - }, - { - V4L2_CID_ISO_SENSITIVITY_AUTO, MMAL_CONTROL_TYPE_STD_MENU, -- 0, 1, V4L2_ISO_SENSITIVITY_AUTO, 1, NULL, -- MMAL_PARAMETER_ISO, -+ 0, V4L2_ISO_SENSITIVITY_AUTO, V4L2_ISO_SENSITIVITY_AUTO, 1, -+ NULL, MMAL_PARAMETER_ISO, - &ctrl_set_iso, - false - }, -@@ -984,8 +971,8 @@ static const struct bm2835_mmal_v4l2_ctr - */ - { - V4L2_CID_EXPOSURE_AUTO, MMAL_CONTROL_TYPE_STD_MENU, -- ~0x03, 3, V4L2_EXPOSURE_AUTO, 0, NULL, -- MMAL_PARAMETER_EXPOSURE_MODE, -+ ~0x03, V4L2_EXPOSURE_APERTURE_PRIORITY, V4L2_EXPOSURE_AUTO, 0, -+ NULL, MMAL_PARAMETER_EXPOSURE_MODE, - &ctrl_set_exposure, - false - }, -@@ -1021,7 +1008,8 @@ static const struct bm2835_mmal_v4l2_ctr - { - V4L2_CID_EXPOSURE_METERING, - MMAL_CONTROL_TYPE_STD_MENU, -- ~0x7, 2, V4L2_EXPOSURE_METERING_AVERAGE, 0, NULL, -+ ~0x7, V4L2_EXPOSURE_METERING_SPOT, -+ V4L2_EXPOSURE_METERING_AVERAGE, 0, NULL, - MMAL_PARAMETER_EXP_METERING_MODE, - &ctrl_set_metering_mode, - false -@@ -1029,7 +1017,8 @@ static const struct bm2835_mmal_v4l2_ctr - { - V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, - MMAL_CONTROL_TYPE_STD_MENU, -- ~0x3ff, 9, V4L2_WHITE_BALANCE_AUTO, 0, NULL, -+ ~0x3ff, V4L2_WHITE_BALANCE_SHADE, V4L2_WHITE_BALANCE_AUTO, 0, -+ NULL, - MMAL_PARAMETER_AWB_MODE, - &ctrl_set_awb_mode, - false -@@ -1050,7 +1039,7 @@ static const struct bm2835_mmal_v4l2_ctr - }, - { - V4L2_CID_COLORFX, MMAL_CONTROL_TYPE_STD_MENU, -- 0, 15, V4L2_COLORFX_NONE, 0, NULL, -+ 0, V4L2_COLORFX_SET_CBCR, V4L2_COLORFX_NONE, 0, NULL, - MMAL_PARAMETER_IMAGE_EFFECT, - &ctrl_set_image_effect, - false -@@ -1085,8 +1074,8 @@ static const struct bm2835_mmal_v4l2_ctr - }, - { - V4L2_CID_MPEG_VIDEO_BITRATE_MODE, MMAL_CONTROL_TYPE_STD_MENU, -- 0, ARRAY_SIZE(bitrate_mode_qmenu) - 1, -- 0, 0, bitrate_mode_qmenu, -+ 0, V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, -+ 0, 0, NULL, - MMAL_PARAMETER_RATECONTROL, - &ctrl_set_bitrate_mode, - false -@@ -1108,8 +1097,8 @@ static const struct bm2835_mmal_v4l2_ctr - }, - { - V4L2_CID_POWER_LINE_FREQUENCY, MMAL_CONTROL_TYPE_STD_MENU, -- 0, ARRAY_SIZE(mains_freq_qmenu) - 1, -- 1, 1, mains_freq_qmenu, -+ 0, V4L2_CID_POWER_LINE_FREQUENCY_AUTO, -+ 1, 1, NULL, - MMAL_PARAMETER_FLICKER_AVOID, - &ctrl_set_flicker_avoidance, - false diff --git a/target/linux/brcm2708/patches-4.19/950-0262-Revert-staging-vchiq_arm-Register-a-platform-device-.patch b/target/linux/brcm2708/patches-4.19/950-0262-Revert-staging-vchiq_arm-Register-a-platform-device-.patch new file mode 100644 index 0000000000..aeaf8bf1a7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0262-Revert-staging-vchiq_arm-Register-a-platform-device-.patch @@ -0,0 +1,48 @@ +From d679d6ff3fd138f55b8bbeaf7750c3c980944295 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 4 Dec 2018 19:40:12 +0000 +Subject: [PATCH] Revert "staging: vchiq_arm: Register a platform + device for the audio driver" + +This reverts commit ab59590ed562b89db51fe46cee5db96b9bc5abd8. + +Issues have been observed in LibreElec as this was unconditionally +loading the audio driver instead of having the DT parameter to +enable it. + +Includes a partial revert of 2147700eb7a1b9e55e0684f0749114ce35d61571 +which fixed up the error handling. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 5 ----- + 1 file changed, 5 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -170,7 +170,6 @@ static struct class *vchiq_class; + static struct device *vchiq_dev; + static DEFINE_SPINLOCK(msg_queue_spinlock); + static struct platform_device *bcm2835_camera; +-static struct platform_device *bcm2835_audio; + static struct platform_device *bcm2835_codec; + static struct platform_device *vcsm_cma; + +@@ -3662,9 +3661,6 @@ static int vchiq_probe(struct platform_d + bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); + if (IS_ERR(bcm2835_camera)) + bcm2835_camera = NULL; +- bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio"); +- if (IS_ERR(bcm2835_audio)) +- bcm2835_audio = NULL; + bcm2835_codec = vchiq_register_child(pdev, "bcm2835-codec"); + if (IS_ERR(bcm2835_codec)) + bcm2835_codec = NULL; +@@ -3685,7 +3681,6 @@ failed_platform_init: + static int vchiq_remove(struct platform_device *pdev) + { + platform_device_unregister(bcm2835_codec); +- platform_device_unregister(bcm2835_audio); + platform_device_unregister(bcm2835_camera); + platform_device_unregister(vcsm_cma); + vchiq_debugfs_deinit(); diff --git a/target/linux/brcm2708/patches-4.19/950-0262-staging-bcm2835-camera-Correct-V4L2_CID_COLORFX_CBCR.patch b/target/linux/brcm2708/patches-4.19/950-0262-staging-bcm2835-camera-Correct-V4L2_CID_COLORFX_CBCR.patch deleted file mode 100644 index 21cbfca0a4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0262-staging-bcm2835-camera-Correct-V4L2_CID_COLORFX_CBCR.patch +++ /dev/null @@ -1,34 +0,0 @@ -From f07147faddeb0e99bfe181af78fcda9ea7f06c3d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 8 Oct 2018 18:26:15 +0100 -Subject: [PATCH 262/806] staging: bcm2835-camera: Correct - V4L2_CID_COLORFX_CBCR behaviour - -With V4L2_CID_COLORFX_CBCR calling ctrl_set_colfx it was incorrectly -assigning the colour values to the enable field of dev->colourfx -instead of the u and v fields. - -Correct the assignments. - -Reported as a Coverity issue -Detected by CoverityScan CID#1419711 ("Unused value") - -Reported-by: Colin Ian King -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/bcm2835-camera/controls.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -578,8 +578,8 @@ static int ctrl_set_colfx(struct bm2835_ - - control = &dev->component[COMP_CAMERA]->control; - -- dev->colourfx.enable = (ctrl->val & 0xff00) >> 8; -- dev->colourfx.enable = ctrl->val & 0xff; -+ dev->colourfx.u = (ctrl->val & 0xff00) >> 8; -+ dev->colourfx.v = ctrl->val & 0xff; - - ret = vchiq_mmal_port_parameter_set(dev->instance, control, - MMAL_PARAMETER_COLOUR_EFFECT, diff --git a/target/linux/brcm2708/patches-4.19/950-0263-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0263-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch new file mode 100644 index 0000000000..ea5d5d2949 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0263-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch @@ -0,0 +1,114 @@ +From 28e06d43dd44a45d307848bed588fc65d7c79d83 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 4 Dec 2018 20:41:19 +0000 +Subject: [PATCH] Revert "staging: bcm2835-audio: Drop DT dependency" + +This reverts commit 933bc853bb764e476b0b0f633588f46d20f1f76a. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-audio/bcm2835.c | 41 ++++++++++--------- + 1 file changed, 22 insertions(+), 19 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -4,17 +4,15 @@ + #include + + #include +-#include +-#include + #include + #include ++#include + + #include "bcm2835.h" + + static bool enable_hdmi; + static bool enable_headphones; + static bool enable_compat_alsa = true; +-static int num_channels = MAX_SUBSTREAMS; + + module_param(enable_hdmi, bool, 0444); + MODULE_PARM_DESC(enable_hdmi, "Enables HDMI virtual audio device"); +@@ -23,8 +21,6 @@ MODULE_PARM_DESC(enable_headphones, "Ena + module_param(enable_compat_alsa, bool, 0444); + MODULE_PARM_DESC(enable_compat_alsa, + "Enables ALSA compatibility virtual audio device"); +-module_param(num_channels, int, 0644); +-MODULE_PARM_DESC(num_channels, "Number of audio channels (default: 8)"); + + static void snd_devm_unregister_child(struct device *dev, void *res) + { +@@ -411,30 +407,31 @@ static int snd_add_child_devices(struct + return 0; + } + +-static int snd_bcm2835_alsa_probe(struct platform_device *pdev) ++static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; ++ u32 numchans; + int err; + +- if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) { +- num_channels = MAX_SUBSTREAMS; +- dev_warn(dev, "Illegal num_channels value, will use %u\n", +- num_channels); +- } +- +- dev->coherent_dma_mask = DMA_BIT_MASK(32); +- dev->dma_mask = &dev->coherent_dma_mask; +- err = of_dma_configure(dev, NULL, true); ++ err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", ++ &numchans); + if (err) { +- dev_err(dev, "Unable to setup DMA: %d\n", err); ++ dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); + return err; + } + ++ if (numchans == 0 || numchans > MAX_SUBSTREAMS) { ++ numchans = MAX_SUBSTREAMS; ++ dev_warn(dev, ++ "Illegal 'brcm,pwm-channels' value, will use %u\n", ++ numchans); ++ } ++ + err = bcm2835_devm_add_vchi_ctx(dev); + if (err) + return err; + +- err = snd_add_child_devices(dev, num_channels); ++ err = snd_add_child_devices(dev, numchans); + if (err) + return err; + +@@ -456,14 +453,21 @@ static int snd_bcm2835_alsa_resume(struc + + #endif + ++static const struct of_device_id snd_bcm2835_of_match_table[] = { ++ { .compatible = "brcm,bcm2835-audio",}, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); ++ + static struct platform_driver bcm2835_alsa0_driver = { +- .probe = snd_bcm2835_alsa_probe, ++ .probe = snd_bcm2835_alsa_probe_dt, + #ifdef CONFIG_PM + .suspend = snd_bcm2835_alsa_suspend, + .resume = snd_bcm2835_alsa_resume, + #endif + .driver = { + .name = "bcm2835_audio", ++ .of_match_table = snd_bcm2835_of_match_table, + }, + }; + module_platform_driver(bcm2835_alsa0_driver); +@@ -471,4 +475,3 @@ module_platform_driver(bcm2835_alsa0_dri + MODULE_AUTHOR("Dom Cobley"); + MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); + MODULE_LICENSE("GPL"); +-MODULE_ALIAS("platform:bcm2835_audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0263-staging-bcm2835-camera-Remove-amend-some-obsolete-co.patch b/target/linux/brcm2708/patches-4.19/950-0263-staging-bcm2835-camera-Remove-amend-some-obsolete-co.patch deleted file mode 100644 index 7645cffac0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0263-staging-bcm2835-camera-Remove-amend-some-obsolete-co.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 37ede4f6a1771b09dea6e8b2fc4d2c5f085a33f3 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 28 Sep 2018 10:22:26 +0100 -Subject: [PATCH 263/806] staging: bcm2835-camera: Remove/amend some obsolete - comments - -Remove a todo which has been done. -Remove a template line that was redundant. -Make a comment clearer as to the non-obvious meaning of a field. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/bcm2835-camera/controls.c | 11 +---------- - 1 file changed, 1 insertion(+), 10 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -965,10 +965,6 @@ static const struct bm2835_mmal_v4l2_ctr - &ctrl_set_value, - false - }, --/* { -- * 0, MMAL_CONTROL_TYPE_CLUSTER, 3, 1, 0, NULL, 0, NULL -- * }, -- */ - { - V4L2_CID_EXPOSURE_AUTO, MMAL_CONTROL_TYPE_STD_MENU, - ~0x03, V4L2_EXPOSURE_APERTURE_PRIORITY, V4L2_EXPOSURE_AUTO, 0, -@@ -976,11 +972,6 @@ static const struct bm2835_mmal_v4l2_ctr - &ctrl_set_exposure, - false - }, --/* todo this needs mixing in with set exposure -- * { -- * V4L2_CID_SCENE_MODE, MMAL_CONTROL_TYPE_STD_MENU, -- * }, -- */ - { - V4L2_CID_EXPOSURE_ABSOLUTE, MMAL_CONTROL_TYPE_STD, - /* Units of 100usecs */ -@@ -1146,7 +1137,7 @@ static const struct bm2835_mmal_v4l2_ctr - }, - { - V4L2_CID_SCENE_MODE, MMAL_CONTROL_TYPE_STD_MENU, -- -1, /* Min is computed at runtime */ -+ -1, /* Min (mask) is computed at runtime */ - V4L2_SCENE_MODE_TEXT, - V4L2_SCENE_MODE_NONE, 1, NULL, - MMAL_PARAMETER_PROFILE, diff --git a/target/linux/brcm2708/patches-4.19/950-0264-ASoC-add-driver-for-3Dlab-Nano-soundcard-2758.patch b/target/linux/brcm2708/patches-4.19/950-0264-ASoC-add-driver-for-3Dlab-Nano-soundcard-2758.patch new file mode 100644 index 0000000000..e33553625d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0264-ASoC-add-driver-for-3Dlab-Nano-soundcard-2758.patch @@ -0,0 +1,483 @@ +From e740bd2cc3fcd632fcd6c8881b1fc671bcde5914 Mon Sep 17 00:00:00 2001 +From: dev-3Dlab <45081440+dev-3Dlab@users.noreply.github.com> +Date: Wed, 5 Dec 2018 10:59:11 +0100 +Subject: [PATCH] ASoC: add driver for 3Dlab Nano soundcard (#2758) + +Signed-off-by: GT +--- + .../overlays/3dlab-nano-player-overlay.dts | 32 ++ + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 + + sound/soc/bcm/3dlab-nano-player.c | 370 ++++++++++++++++++ + sound/soc/bcm/Kconfig | 6 + + sound/soc/bcm/Makefile | 2 + + 8 files changed, 419 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts + create mode 100644 sound/soc/bcm/3dlab-nano-player.c + +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts +@@ -0,0 +1,32 @@ ++// Definitions for 3Dlab Nano Player ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ nano-player@41 { ++ compatible = "3dlab,nano-player"; ++ reg = <0x41>; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; ++ ++// EOF +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -1,6 +1,7 @@ + # Overlays for the Raspberry Pi platform + + dtbo-$(CONFIG_ARCH_BCM2835) += \ ++ 3dlab-nano-player.dtbo \ + adau1977-adc.dtbo \ + adau7002-simple.dtbo \ + ads1015.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -199,6 +199,12 @@ Params: + and the other i2c baudrate parameters. + + ++Name: 3dlab-nano-player ++Info: Configures the 3Dlab Nano Player ++Load: dtoverlay=3dlab-nano-player ++Params: ++ ++ + Name: adau1977-adc + Info: Overlay for activation of ADAU1977 ADC codec over I2C for control + and I2S for data. +--- /dev/null ++++ b/sound/soc/bcm/3dlab-nano-player.c +@@ -0,0 +1,370 @@ ++/* ++ * 3Dlab Nano Player ALSA SoC Audio driver. ++ * ++ * Copyright (C) 2018 3Dlab. ++ * ++ * Author: GT ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define NANO_ID 0x00 ++#define NANO_VER 0x01 ++#define NANO_CFG 0x02 ++#define NANO_STATUS 0x03 ++#define NANO_SPI_ADDR 0x04 ++#define NANO_SPI_DATA 0x05 ++ ++#define NANO_ID_VAL 0x3D ++#define NANO_CFG_OFF 0x00 ++#define NANO_CFG_MULT1 0 ++#define NANO_CFG_MULT2 1 ++#define NANO_CFG_MULT4 2 ++#define NANO_CFG_MULT8 3 ++#define NANO_CFG_MULT16 4 ++#define NANO_CFG_CLK22 0 ++#define NANO_CFG_CLK24 BIT(3) ++#define NANO_CFG_DSD BIT(4) ++#define NANO_CFG_ENA BIT(5) ++#define NANO_CFG_BLINK BIT(6) ++#define NANO_STATUS_P1 BIT(0) ++#define NANO_STATUS_P2 BIT(1) ++#define NANO_STATUS_FLG BIT(2) ++#define NANO_STATUS_CLK BIT(3) ++#define NANO_SPI_READ 0 ++#define NANO_SPI_WRITE BIT(5) ++ ++#define NANO_DAC_CTRL1 0x00 ++#define NANO_DAC_CTRL2 0x01 ++#define NANO_DAC_CTRL3 0x02 ++#define NANO_DAC_LATT 0x03 ++#define NANO_DAC_RATT 0x04 ++ ++#define NANO_CTRL2_VAL 0x22 ++ ++static int nano_player_spi_write(struct regmap *map, ++ unsigned int reg, unsigned int val) ++{ ++ /* indirect register access */ ++ regmap_write(map, NANO_SPI_DATA, val); ++ regmap_write(map, NANO_SPI_ADDR, reg | NANO_SPI_WRITE); ++ return 0; ++} ++ ++static int nano_player_ctrl_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ /* describe control element */ ++ if (strstr(kcontrol->id.name, "Volume")) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 100; ++ } else { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ } ++ ++ return 0; ++} ++ ++static int nano_player_ctrl_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ /* program control value to hardware */ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct regmap *regmap = snd_soc_card_get_drvdata(card); ++ ++ if (strstr(kcontrol->id.name, "Volume")) { ++ unsigned int vol = ucontrol->value.integer.value[0]; ++ unsigned int att = 255 - (2 * (100 - vol)); ++ ++ nano_player_spi_write(regmap, NANO_DAC_LATT, att); ++ nano_player_spi_write(regmap, NANO_DAC_RATT, att); ++ kcontrol->private_value = vol; ++ } else { ++ unsigned int mute = ucontrol->value.integer.value[0]; ++ unsigned int reg = NANO_CTRL2_VAL | mute; ++ ++ nano_player_spi_write(regmap, NANO_DAC_CTRL2, reg); ++ kcontrol->private_value = mute; ++ } ++ return 0; ++} ++ ++static int nano_player_ctrl_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ /* return last programmed value */ ++ ucontrol->value.integer.value[0] = kcontrol->private_value; ++ return 0; ++} ++ ++#define SOC_NANO_PLAYER_CTRL(xname) \ ++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \ ++ .info = nano_player_ctrl_info, \ ++ .put = nano_player_ctrl_put, \ ++ .get = nano_player_ctrl_get } ++ ++static const struct snd_kcontrol_new nano_player_controls[] = { ++ SOC_NANO_PLAYER_CTRL("Master Playback Volume"), ++ SOC_NANO_PLAYER_CTRL("Master Playback Switch"), ++}; ++ ++static const unsigned int nano_player_rates[] = { ++ 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000, ++ 705600, 768000 /* only possible with fast clocks */ ++}; ++ ++static struct snd_pcm_hw_constraint_list nano_player_constraint_rates = { ++ .list = nano_player_rates, ++ .count = ARRAY_SIZE(nano_player_rates), ++}; ++ ++static int nano_player_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_card *card = rtd->card; ++ struct regmap *regmap = snd_soc_card_get_drvdata(card); ++ struct snd_soc_pcm_stream *cpu = &rtd->cpu_dai->driver->playback; ++ struct snd_soc_pcm_stream *codec = &rtd->codec_dai->driver->playback; ++ unsigned int sample_bits = 32; ++ unsigned int val; ++ ++ /* configure cpu dai */ ++ cpu->formats |= SNDRV_PCM_FMTBIT_DSD_U32_LE; ++ cpu->rate_max = 768000; ++ ++ /* configure dummy codec dai */ ++ codec->rate_min = 44100; ++ codec->rates = SNDRV_PCM_RATE_KNOT; ++ codec->formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_DSD_U32_LE; ++ ++ /* configure max supported rate */ ++ regmap_read(regmap, NANO_STATUS, &val); ++ if (val & NANO_STATUS_CLK) { ++ dev_notice(card->dev, "Board with fast clocks installed\n"); ++ codec->rate_max = 768000; ++ } else { ++ dev_notice(card->dev, "Board with normal clocks installed\n"); ++ codec->rate_max = 384000; ++ } ++ ++ /* frame length enforced by hardware */ ++ return snd_soc_dai_set_bclk_ratio(rtd->cpu_dai, sample_bits * 2); ++} ++ ++static int nano_player_startup(struct snd_pcm_substream *substream) ++{ ++ return snd_pcm_hw_constraint_list(substream->runtime, 0, ++ SNDRV_PCM_HW_PARAM_RATE, ++ &nano_player_constraint_rates); ++} ++ ++static int nano_player_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_card *card = rtd->card; ++ struct regmap *regmap = snd_soc_card_get_drvdata(card); ++ unsigned int config = NANO_CFG_ENA; ++ struct snd_mask *fmt; ++ ++ /* configure PCM or DSD */ ++ fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); ++ if (snd_mask_test(fmt, SNDRV_PCM_FORMAT_DSD_U32_LE)) { ++ /* embed DSD in PCM data */ ++ snd_mask_none(fmt); ++ snd_mask_set(fmt, SNDRV_PCM_FORMAT_S32_LE); ++ /* enable DSD mode */ ++ config |= NANO_CFG_DSD; ++ } ++ ++ /* configure clocks */ ++ switch (params_rate(params)) { ++ case 44100: ++ config |= NANO_CFG_MULT1 | NANO_CFG_CLK22; ++ break; ++ case 88200: ++ config |= NANO_CFG_MULT2 | NANO_CFG_CLK22; ++ break; ++ case 176400: ++ config |= NANO_CFG_MULT4 | NANO_CFG_CLK22; ++ break; ++ case 352800: ++ config |= NANO_CFG_MULT8 | NANO_CFG_CLK22; ++ break; ++ case 705600: ++ config |= NANO_CFG_MULT16 | NANO_CFG_CLK22; ++ break; ++ case 48000: ++ config |= NANO_CFG_MULT1 | NANO_CFG_CLK24; ++ break; ++ case 96000: ++ config |= NANO_CFG_MULT2 | NANO_CFG_CLK24; ++ break; ++ case 192000: ++ config |= NANO_CFG_MULT4 | NANO_CFG_CLK24; ++ break; ++ case 384000: ++ config |= NANO_CFG_MULT8 | NANO_CFG_CLK24; ++ break; ++ case 768000: ++ config |= NANO_CFG_MULT16 | NANO_CFG_CLK24; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ dev_dbg(card->dev, "Send CFG register 0x%02X\n", config); ++ return regmap_write(regmap, NANO_CFG, config); ++} ++ ++static struct snd_soc_ops nano_player_ops = { ++ .startup = nano_player_startup, ++ .hw_params = nano_player_hw_params, ++}; ++ ++static struct snd_soc_dai_link nano_player_link = { ++ .name = "3Dlab Nano Player", ++ .stream_name = "3Dlab Nano Player HiFi", ++ .platform_name = "bcm2708-i2s.0", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_name = "snd-soc-dummy", ++ .codec_dai_name = "snd-soc-dummy-dai", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_CONT | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .init = nano_player_init, ++ .ops = &nano_player_ops, ++}; ++ ++static const struct regmap_config nano_player_regmap = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ .max_register = 128, ++ .cache_type = REGCACHE_RBTREE, ++}; ++ ++static int nano_player_card_probe(struct snd_soc_card *card) ++{ ++ struct regmap *regmap = snd_soc_card_get_drvdata(card); ++ unsigned int val; ++ ++ /* check hardware integrity */ ++ regmap_read(regmap, NANO_ID, &val); ++ if (val != NANO_ID_VAL) { ++ dev_err(card->dev, "Invalid ID register 0x%02X\n", val); ++ return -ENODEV; ++ } ++ ++ /* report version to the user */ ++ regmap_read(regmap, NANO_VER, &val); ++ dev_notice(card->dev, "Started 3Dlab Nano Player driver (v%d)\n", val); ++ ++ /* enable internal audio bus and blink status LED */ ++ return regmap_write(regmap, NANO_CFG, NANO_CFG_ENA | NANO_CFG_BLINK); ++} ++ ++static int nano_player_card_remove(struct snd_soc_card *card) ++{ ++ /* disable internal audio bus */ ++ struct regmap *regmap = snd_soc_card_get_drvdata(card); ++ ++ return regmap_write(regmap, NANO_CFG, NANO_CFG_OFF); ++} ++ ++static struct snd_soc_card nano_player_card = { ++ .name = "3Dlab_Nano_Player", ++ .owner = THIS_MODULE, ++ .dai_link = &nano_player_link, ++ .num_links = 1, ++ .controls = nano_player_controls, ++ .num_controls = ARRAY_SIZE(nano_player_controls), ++ .probe = nano_player_card_probe, ++ .remove = nano_player_card_remove, ++}; ++ ++static int nano_player_i2c_probe(struct i2c_client *i2c, ++ const struct i2c_device_id *id) ++{ ++ struct regmap *regmap; ++ int ret; ++ ++ regmap = devm_regmap_init_i2c(i2c, &nano_player_regmap); ++ if (IS_ERR(regmap)) { ++ ret = PTR_ERR(regmap); ++ dev_err(&i2c->dev, "Failed to init regmap %d\n", ret); ++ return ret; ++ } ++ ++ if (i2c->dev.of_node) { ++ struct snd_soc_dai_link *dai = &nano_player_link; ++ struct device_node *node; ++ ++ /* cpu handle configured by device tree */ ++ node = of_parse_phandle(i2c->dev.of_node, "i2s-controller", 0); ++ if (node) { ++ dai->platform_name = NULL; ++ dai->platform_of_node = node; ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = node; ++ } ++ } ++ ++ nano_player_card.dev = &i2c->dev; ++ snd_soc_card_set_drvdata(&nano_player_card, regmap); ++ ret = devm_snd_soc_register_card(&i2c->dev, &nano_player_card); ++ ++ if (ret && ret != -EPROBE_DEFER) ++ dev_err(&i2c->dev, "Failed to register card %d\n", ret); ++ ++ return ret; ++} ++ ++static const struct of_device_id nano_player_of_match[] = { ++ { .compatible = "3dlab,nano-player", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, nano_player_of_match); ++ ++static const struct i2c_device_id nano_player_i2c_id[] = { ++ { "nano-player", 0 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(i2c, nano_player_i2c_id); ++ ++static struct i2c_driver nano_player_i2c_driver = { ++ .probe = nano_player_i2c_probe, ++ .id_table = nano_player_i2c_id, ++ .driver = { ++ .name = "nano-player", ++ .owner = THIS_MODULE, ++ .of_match_table = nano_player_of_match, ++ }, ++}; ++ ++module_i2c_driver(nano_player_i2c_driver); ++ ++MODULE_DESCRIPTION("ASoC 3Dlab Nano Player driver"); ++MODULE_AUTHOR("GT "); ++MODULE_LICENSE("GPL v2"); ++ ++/* EOF */ +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -17,6 +17,12 @@ config SND_SOC_CYGNUS + + If you don't know what to do here, say N. + ++config SND_BCM2708_SOC_3DLAB_NANO_PLAYER ++ tristate "Support for 3Dlab Nano Player" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ help ++ Say Y or M if you want to add support for 3Dlab Nano Player. ++ + config SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD + tristate "Support for Google voiceHAT soundcard" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- + snd-soc-googlevoicehat-codec-objs := googlevoicehat-codec.o + + # BCM2708 Machine Support ++snd-soc-3dlab-nano-player-objs := 3dlab-nano-player.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-justboom-dac-objs := justboom-dac.o + snd-soc-rpi-cirrus-objs := rpi-cirrus.o +@@ -31,6 +32,7 @@ snd-soc-fe-pi-audio-objs := fe-pi-audio. + snd-soc-rpi-simple-soundcard-objs := rpi-simple-soundcard.o + snd-soc-rpi-wm8804-soundcard-objs := rpi-wm8804-soundcard.o + ++obj-$(CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER) += snd-soc-3dlab-nano-player.o + obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o diff --git a/target/linux/brcm2708/patches-4.19/950-0264-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch b/target/linux/brcm2708/patches-4.19/950-0264-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch deleted file mode 100644 index bbf5d36c2f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0264-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch +++ /dev/null @@ -1,7535 +0,0 @@ -From e7723c6bcf31a440b8762e9e22497ff3fbbb7056 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 24 Sep 2018 16:30:37 +0100 -Subject: [PATCH 264/806] staging: vc04_services: Split vchiq-mmal into a - module - -In preparation for adding a video codec V4L2 module which also -wants to use vchiq-mmal functions, split it out into an -independent module. -The minimum number of changes have been made to achieve this -(eg straight moves where possible) so existing checkpatch -errors will still be present. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/Kconfig | 1 + - drivers/staging/vc04_services/Makefile | 1 + - .../vc04_services/bcm2835-camera/Kconfig | 2 +- - .../vc04_services/bcm2835-camera/Makefile | 4 ++-- - .../staging/vc04_services/vchiq-mmal/Kconfig | 7 ++++++ - .../staging/vc04_services/vchiq-mmal/Makefile | 8 +++++++ - .../mmal-common.h | 0 - .../mmal-encodings.h | 0 - .../mmal-msg-common.h | 0 - .../mmal-msg-format.h | 0 - .../mmal-msg-port.h | 0 - .../{bcm2835-camera => vchiq-mmal}/mmal-msg.h | 0 - .../mmal-parameters.h | 0 - .../mmal-vchiq.c | 22 +++++++++++++++++++ - .../mmal-vchiq.h | 0 - 15 files changed, 42 insertions(+), 3 deletions(-) - create mode 100644 drivers/staging/vc04_services/vchiq-mmal/Kconfig - create mode 100644 drivers/staging/vc04_services/vchiq-mmal/Makefile - rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-common.h (100%) - rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-encodings.h (100%) - rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-msg-common.h (100%) - rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-msg-format.h (100%) - rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-msg-port.h (100%) - rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-msg.h (100%) - rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-parameters.h (100%) - rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-vchiq.c (98%) - rename drivers/staging/vc04_services/{bcm2835-camera => vchiq-mmal}/mmal-vchiq.h (100%) - ---- a/drivers/staging/vc04_services/Kconfig -+++ b/drivers/staging/vc04_services/Kconfig -@@ -21,6 +21,7 @@ config BCM2835_VCHIQ - source "drivers/staging/vc04_services/bcm2835-audio/Kconfig" - - source "drivers/staging/vc04_services/bcm2835-camera/Kconfig" -+source "drivers/staging/vc04_services/vchiq-mmal/Kconfig" - - endif - ---- a/drivers/staging/vc04_services/Makefile -+++ b/drivers/staging/vc04_services/Makefile -@@ -12,6 +12,7 @@ vchiq-objs := \ - - obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/ - obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-camera/ -+obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += vchiq-mmal/ - - ccflags-y += -Idrivers/staging/vc04_services -D__VCCOREVER__=0x04000000 - ---- a/drivers/staging/vc04_services/bcm2835-camera/Kconfig -+++ b/drivers/staging/vc04_services/bcm2835-camera/Kconfig -@@ -2,7 +2,7 @@ config VIDEO_BCM2835 - tristate "BCM2835 Camera" - depends on MEDIA_SUPPORT - depends on VIDEO_V4L2 && (ARCH_BCM2835 || COMPILE_TEST) -- select BCM2835_VCHIQ -+ select BCM2835_VCHIQ_MMAL - select VIDEOBUF2_VMALLOC - select BTREE - help ---- a/drivers/staging/vc04_services/bcm2835-camera/Makefile -+++ b/drivers/staging/vc04_services/bcm2835-camera/Makefile -@@ -1,11 +1,11 @@ - # SPDX-License-Identifier: GPL-2.0 - bcm2835-v4l2-$(CONFIG_VIDEO_BCM2835) := \ - bcm2835-camera.o \ -- controls.o \ -- mmal-vchiq.o -+ controls.o - - obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-v4l2.o - - ccflags-y += \ - -Idrivers/staging/vc04_services \ -+ -Idrivers/staging/vc04_services/vchiq-mmal \ - -D__VCCOREVER__=0x04000000 ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/Kconfig -@@ -0,0 +1,7 @@ -+config BCM2835_VCHIQ_MMAL -+ tristate "BCM2835 MMAL VCHIQ service" -+ depends on (ARCH_BCM2835 || COMPILE_TEST) -+ select BCM2835_VCHIQ -+ help -+ Enables the MMAL API over VCHIQ as used for the -+ majority of the multimedia services on VideoCore. ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/Makefile -@@ -0,0 +1,8 @@ -+# SPDX-License-Identifier: GPL-2.0 -+bcm2835-mmal-vchiq-objs := mmal-vchiq.o -+ -+obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += bcm2835-mmal-vchiq.o -+ -+ccflags-y += \ -+ -Idrivers/staging/vc04_services \ -+ -D__VCCOREVER__=0x04000000 ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c -+++ /dev/null -@@ -1,1899 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0 --/* -- * Broadcom BM2835 V4L2 driver -- * -- * Copyright © 2013 Raspberry Pi (Trading) Ltd. -- * -- * Authors: Vincent Sanders @ Collabora -- * Dave Stevenson @ Broadcom -- * (now dave.stevenson@raspberrypi.org) -- * Simon Mellor @ Broadcom -- * Luke Diamand @ Broadcom -- * -- * V4L2 driver MMAL vchiq interface code -- */ -- --#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -- --#include --#include --#include --#include --#include --#include --#include --#include --#include -- --#include "mmal-common.h" --#include "mmal-vchiq.h" --#include "mmal-msg.h" -- --#define USE_VCHIQ_ARM --#include "interface/vchi/vchi.h" -- --/* maximum number of components supported */ --#define VCHIQ_MMAL_MAX_COMPONENTS 4 -- --/*#define FULL_MSG_DUMP 1*/ -- --#ifdef DEBUG --static const char *const msg_type_names[] = { -- "UNKNOWN", -- "QUIT", -- "SERVICE_CLOSED", -- "GET_VERSION", -- "COMPONENT_CREATE", -- "COMPONENT_DESTROY", -- "COMPONENT_ENABLE", -- "COMPONENT_DISABLE", -- "PORT_INFO_GET", -- "PORT_INFO_SET", -- "PORT_ACTION", -- "BUFFER_FROM_HOST", -- "BUFFER_TO_HOST", -- "GET_STATS", -- "PORT_PARAMETER_SET", -- "PORT_PARAMETER_GET", -- "EVENT_TO_HOST", -- "GET_CORE_STATS_FOR_PORT", -- "OPAQUE_ALLOCATOR", -- "CONSUME_MEM", -- "LMK", -- "OPAQUE_ALLOCATOR_DESC", -- "DRM_GET_LHS32", -- "DRM_GET_TIME", -- "BUFFER_FROM_HOST_ZEROLEN", -- "PORT_FLUSH", -- "HOST_LOG", --}; --#endif -- --static const char *const port_action_type_names[] = { -- "UNKNOWN", -- "ENABLE", -- "DISABLE", -- "FLUSH", -- "CONNECT", -- "DISCONNECT", -- "SET_REQUIREMENTS", --}; -- --#if defined(DEBUG) --#if defined(FULL_MSG_DUMP) --#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) \ -- do { \ -- pr_debug(TITLE" type:%s(%d) length:%d\n", \ -- msg_type_names[(MSG)->h.type], \ -- (MSG)->h.type, (MSG_LEN)); \ -- print_hex_dump(KERN_DEBUG, "<h.type], \ -- (MSG)->h.type, (MSG_LEN)); \ -- } --#endif --#else --#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) --#endif -- --struct vchiq_mmal_instance; -- --/* normal message context */ --struct mmal_msg_context { -- struct vchiq_mmal_instance *instance; -- -- /* Index in the context_map idr so that we can find the -- * mmal_msg_context again when servicing the VCHI reply. -- */ -- int handle; -- -- union { -- struct { -- /* work struct for buffer_cb callback */ -- struct work_struct work; -- /* work struct for deferred callback */ -- struct work_struct buffer_to_host_work; -- /* mmal instance */ -- struct vchiq_mmal_instance *instance; -- /* mmal port */ -- struct vchiq_mmal_port *port; -- /* actual buffer used to store bulk reply */ -- struct mmal_buffer *buffer; -- /* amount of buffer used */ -- unsigned long buffer_used; -- /* MMAL buffer flags */ -- u32 mmal_flags; -- /* Presentation and Decode timestamps */ -- s64 pts; -- s64 dts; -- -- int status; /* context status */ -- -- } bulk; /* bulk data */ -- -- struct { -- /* message handle to release */ -- VCHI_HELD_MSG_T msg_handle; -- /* pointer to received message */ -- struct mmal_msg *msg; -- /* received message length */ -- u32 msg_len; -- /* completion upon reply */ -- struct completion cmplt; -- } sync; /* synchronous response */ -- } u; -- --}; -- --struct vchiq_mmal_instance { -- VCHI_SERVICE_HANDLE_T handle; -- -- /* ensure serialised access to service */ -- struct mutex vchiq_mutex; -- -- /* vmalloc page to receive scratch bulk xfers into */ -- void *bulk_scratch; -- -- struct idr context_map; -- /* protect accesses to context_map */ -- struct mutex context_map_lock; -- -- /* component to use next */ -- int component_idx; -- struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS]; -- -- /* ordered workqueue to process all bulk operations */ -- struct workqueue_struct *bulk_wq; --}; -- --static struct mmal_msg_context * --get_msg_context(struct vchiq_mmal_instance *instance) --{ -- struct mmal_msg_context *msg_context; -- int handle; -- -- /* todo: should this be allocated from a pool to avoid kzalloc */ -- msg_context = kzalloc(sizeof(*msg_context), GFP_KERNEL); -- -- if (!msg_context) -- return ERR_PTR(-ENOMEM); -- -- /* Create an ID that will be passed along with our message so -- * that when we service the VCHI reply, we can look up what -- * message is being replied to. -- */ -- mutex_lock(&instance->context_map_lock); -- handle = idr_alloc(&instance->context_map, msg_context, -- 0, 0, GFP_KERNEL); -- mutex_unlock(&instance->context_map_lock); -- -- if (handle < 0) { -- kfree(msg_context); -- return ERR_PTR(handle); -- } -- -- msg_context->instance = instance; -- msg_context->handle = handle; -- -- return msg_context; --} -- --static struct mmal_msg_context * --lookup_msg_context(struct vchiq_mmal_instance *instance, int handle) --{ -- return idr_find(&instance->context_map, handle); --} -- --static void --release_msg_context(struct mmal_msg_context *msg_context) --{ -- struct vchiq_mmal_instance *instance = msg_context->instance; -- -- mutex_lock(&instance->context_map_lock); -- idr_remove(&instance->context_map, msg_context->handle); -- mutex_unlock(&instance->context_map_lock); -- kfree(msg_context); --} -- --/* deals with receipt of event to host message */ --static void event_to_host_cb(struct vchiq_mmal_instance *instance, -- struct mmal_msg *msg, u32 msg_len) --{ -- pr_debug("unhandled event\n"); -- pr_debug("component:%u port type:%d num:%d cmd:0x%x length:%d\n", -- msg->u.event_to_host.client_component, -- msg->u.event_to_host.port_type, -- msg->u.event_to_host.port_num, -- msg->u.event_to_host.cmd, msg->u.event_to_host.length); --} -- --/* workqueue scheduled callback -- * -- * we do this because it is important we do not call any other vchiq -- * sync calls from witin the message delivery thread -- */ --static void buffer_work_cb(struct work_struct *work) --{ -- struct mmal_msg_context *msg_context = -- container_of(work, struct mmal_msg_context, u.bulk.work); -- -- atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); -- -- msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, -- msg_context->u.bulk.port, -- msg_context->u.bulk.status, -- msg_context->u.bulk.buffer, -- msg_context->u.bulk.buffer_used, -- msg_context->u.bulk.mmal_flags, -- msg_context->u.bulk.dts, -- msg_context->u.bulk.pts); --} -- --/* workqueue scheduled callback to handle receiving buffers -- * -- * VCHI will allow up to 4 bulk receives to be scheduled before blocking. -- * If we block in the service_callback context then we can't process the -- * VCHI_CALLBACK_BULK_RECEIVED message that would otherwise allow the blocked -- * vchi_bulk_queue_receive() call to complete. -- */ --static void buffer_to_host_work_cb(struct work_struct *work) --{ -- struct mmal_msg_context *msg_context = -- container_of(work, struct mmal_msg_context, -- u.bulk.buffer_to_host_work); -- struct vchiq_mmal_instance *instance = msg_context->instance; -- unsigned long len = msg_context->u.bulk.buffer_used; -- int ret; -- -- if (!len) -- /* Dummy receive to ensure the buffers remain in order */ -- len = 8; -- /* queue the bulk submission */ -- vchi_service_use(instance->handle); -- ret = vchi_bulk_queue_receive(instance->handle, -- msg_context->u.bulk.buffer->buffer, -- /* Actual receive needs to be a multiple -- * of 4 bytes -- */ -- (len + 3) & ~3, -- VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | -- VCHI_FLAGS_BLOCK_UNTIL_QUEUED, -- msg_context); -- -- vchi_service_release(instance->handle); -- -- if (ret != 0) -- pr_err("%s: ctx: %p, vchi_bulk_queue_receive failed %d\n", -- __func__, msg_context, ret); --} -- --/* enqueue a bulk receive for a given message context */ --static int bulk_receive(struct vchiq_mmal_instance *instance, -- struct mmal_msg *msg, -- struct mmal_msg_context *msg_context) --{ -- unsigned long rd_len; -- -- rd_len = msg->u.buffer_from_host.buffer_header.length; -- -- if (!msg_context->u.bulk.buffer) { -- pr_err("bulk.buffer not configured - error in buffer_from_host\n"); -- -- /* todo: this is a serious error, we should never have -- * committed a buffer_to_host operation to the mmal -- * port without the buffer to back it up (underflow -- * handling) and there is no obvious way to deal with -- * this - how is the mmal servie going to react when -- * we fail to do the xfer and reschedule a buffer when -- * it arrives? perhaps a starved flag to indicate a -- * waiting bulk receive? -- */ -- -- return -EINVAL; -- } -- -- /* ensure we do not overrun the available buffer */ -- if (rd_len > msg_context->u.bulk.buffer->buffer_size) { -- rd_len = msg_context->u.bulk.buffer->buffer_size; -- pr_warn("short read as not enough receive buffer space\n"); -- /* todo: is this the correct response, what happens to -- * the rest of the message data? -- */ -- } -- -- /* store length */ -- msg_context->u.bulk.buffer_used = rd_len; -- msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; -- msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; -- -- queue_work(msg_context->instance->bulk_wq, -- &msg_context->u.bulk.buffer_to_host_work); -- -- return 0; --} -- --/* data in message, memcpy from packet into output buffer */ --static int inline_receive(struct vchiq_mmal_instance *instance, -- struct mmal_msg *msg, -- struct mmal_msg_context *msg_context) --{ -- memcpy(msg_context->u.bulk.buffer->buffer, -- msg->u.buffer_from_host.short_data, -- msg->u.buffer_from_host.payload_in_message); -- -- msg_context->u.bulk.buffer_used = -- msg->u.buffer_from_host.payload_in_message; -- -- return 0; --} -- --/* queue the buffer availability with MMAL_MSG_TYPE_BUFFER_FROM_HOST */ --static int --buffer_from_host(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, struct mmal_buffer *buf) --{ -- struct mmal_msg_context *msg_context; -- struct mmal_msg m; -- int ret; -- -- if (!port->enabled) -- return -EINVAL; -- -- pr_debug("instance:%p buffer:%p\n", instance->handle, buf); -- -- /* get context */ -- if (!buf->msg_context) { -- pr_err("%s: msg_context not allocated, buf %p\n", __func__, -- buf); -- return -EINVAL; -- } -- msg_context = buf->msg_context; -- -- /* store bulk message context for when data arrives */ -- msg_context->u.bulk.instance = instance; -- msg_context->u.bulk.port = port; -- msg_context->u.bulk.buffer = buf; -- msg_context->u.bulk.buffer_used = 0; -- -- /* initialise work structure ready to schedule callback */ -- INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb); -- INIT_WORK(&msg_context->u.bulk.buffer_to_host_work, -- buffer_to_host_work_cb); -- -- atomic_inc(&port->buffers_with_vpu); -- -- /* prep the buffer from host message */ -- memset(&m, 0xbc, sizeof(m)); /* just to make debug clearer */ -- -- m.h.type = MMAL_MSG_TYPE_BUFFER_FROM_HOST; -- m.h.magic = MMAL_MAGIC; -- m.h.context = msg_context->handle; -- m.h.status = 0; -- -- /* drvbuf is our private data passed back */ -- m.u.buffer_from_host.drvbuf.magic = MMAL_MAGIC; -- m.u.buffer_from_host.drvbuf.component_handle = port->component->handle; -- m.u.buffer_from_host.drvbuf.port_handle = port->handle; -- m.u.buffer_from_host.drvbuf.client_context = msg_context->handle; -- -- /* buffer header */ -- m.u.buffer_from_host.buffer_header.cmd = 0; -- m.u.buffer_from_host.buffer_header.data = -- (u32)(unsigned long)buf->buffer; -- m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; -- m.u.buffer_from_host.buffer_header.length = 0; /* nothing used yet */ -- m.u.buffer_from_host.buffer_header.offset = 0; /* no offset */ -- m.u.buffer_from_host.buffer_header.flags = 0; /* no flags */ -- m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; -- m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; -- -- /* clear buffer type sepecific data */ -- memset(&m.u.buffer_from_host.buffer_header_type_specific, 0, -- sizeof(m.u.buffer_from_host.buffer_header_type_specific)); -- -- /* no payload in message */ -- m.u.buffer_from_host.payload_in_message = 0; -- -- vchi_service_use(instance->handle); -- -- ret = vchi_queue_kernel_message(instance->handle, -- &m, -- sizeof(struct mmal_msg_header) + -- sizeof(m.u.buffer_from_host)); -- -- vchi_service_release(instance->handle); -- -- return ret; --} -- --/* deals with receipt of buffer to host message */ --static void buffer_to_host_cb(struct vchiq_mmal_instance *instance, -- struct mmal_msg *msg, u32 msg_len) --{ -- struct mmal_msg_context *msg_context; -- u32 handle; -- -- pr_debug("%s: instance:%p msg:%p msg_len:%d\n", -- __func__, instance, msg, msg_len); -- -- if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) { -- handle = msg->u.buffer_from_host.drvbuf.client_context; -- msg_context = lookup_msg_context(instance, handle); -- -- if (!msg_context) { -- pr_err("drvbuf.client_context(%u) is invalid\n", -- handle); -- return; -- } -- } else { -- pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n"); -- return; -- } -- -- msg_context->u.bulk.mmal_flags = -- msg->u.buffer_from_host.buffer_header.flags; -- -- if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) { -- /* message reception had an error */ -- pr_warn("error %d in reply\n", msg->h.status); -- -- msg_context->u.bulk.status = msg->h.status; -- -- } else if (msg->u.buffer_from_host.buffer_header.length == 0) { -- /* empty buffer */ -- if (msg->u.buffer_from_host.buffer_header.flags & -- MMAL_BUFFER_HEADER_FLAG_EOS) { -- msg_context->u.bulk.status = -- bulk_receive(instance, msg, msg_context); -- if (msg_context->u.bulk.status == 0) -- return; /* successful bulk submission, bulk -- * completion will trigger callback -- */ -- } else { -- /* do callback with empty buffer - not EOS though */ -- msg_context->u.bulk.status = 0; -- msg_context->u.bulk.buffer_used = 0; -- } -- } else if (msg->u.buffer_from_host.payload_in_message == 0) { -- /* data is not in message, queue a bulk receive */ -- msg_context->u.bulk.status = -- bulk_receive(instance, msg, msg_context); -- if (msg_context->u.bulk.status == 0) -- return; /* successful bulk submission, bulk -- * completion will trigger callback -- */ -- -- /* failed to submit buffer, this will end badly */ -- pr_err("error %d on bulk submission\n", -- msg_context->u.bulk.status); -- -- } else if (msg->u.buffer_from_host.payload_in_message <= -- MMAL_VC_SHORT_DATA) { -- /* data payload within message */ -- msg_context->u.bulk.status = inline_receive(instance, msg, -- msg_context); -- } else { -- pr_err("message with invalid short payload\n"); -- -- /* signal error */ -- msg_context->u.bulk.status = -EINVAL; -- msg_context->u.bulk.buffer_used = -- msg->u.buffer_from_host.payload_in_message; -- } -- -- /* schedule the port callback */ -- schedule_work(&msg_context->u.bulk.work); --} -- --static void bulk_receive_cb(struct vchiq_mmal_instance *instance, -- struct mmal_msg_context *msg_context) --{ -- msg_context->u.bulk.status = 0; -- -- /* schedule the port callback */ -- schedule_work(&msg_context->u.bulk.work); --} -- --static void bulk_abort_cb(struct vchiq_mmal_instance *instance, -- struct mmal_msg_context *msg_context) --{ -- pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context); -- -- msg_context->u.bulk.status = -EINTR; -- -- schedule_work(&msg_context->u.bulk.work); --} -- --/* incoming event service callback */ --static void service_callback(void *param, -- const VCHI_CALLBACK_REASON_T reason, -- void *bulk_ctx) --{ -- struct vchiq_mmal_instance *instance = param; -- int status; -- u32 msg_len; -- struct mmal_msg *msg; -- VCHI_HELD_MSG_T msg_handle; -- struct mmal_msg_context *msg_context; -- -- if (!instance) { -- pr_err("Message callback passed NULL instance\n"); -- return; -- } -- -- switch (reason) { -- case VCHI_CALLBACK_MSG_AVAILABLE: -- status = vchi_msg_hold(instance->handle, (void **)&msg, -- &msg_len, VCHI_FLAGS_NONE, &msg_handle); -- if (status) { -- pr_err("Unable to dequeue a message (%d)\n", status); -- break; -- } -- -- DBG_DUMP_MSG(msg, msg_len, "<<< reply message"); -- -- /* handling is different for buffer messages */ -- switch (msg->h.type) { -- case MMAL_MSG_TYPE_BUFFER_FROM_HOST: -- vchi_held_msg_release(&msg_handle); -- break; -- -- case MMAL_MSG_TYPE_EVENT_TO_HOST: -- event_to_host_cb(instance, msg, msg_len); -- vchi_held_msg_release(&msg_handle); -- -- break; -- -- case MMAL_MSG_TYPE_BUFFER_TO_HOST: -- buffer_to_host_cb(instance, msg, msg_len); -- vchi_held_msg_release(&msg_handle); -- break; -- -- default: -- /* messages dependent on header context to complete */ -- if (!msg->h.context) { -- pr_err("received message context was null!\n"); -- vchi_held_msg_release(&msg_handle); -- break; -- } -- -- msg_context = lookup_msg_context(instance, -- msg->h.context); -- if (!msg_context) { -- pr_err("received invalid message context %u!\n", -- msg->h.context); -- vchi_held_msg_release(&msg_handle); -- break; -- } -- -- /* fill in context values */ -- msg_context->u.sync.msg_handle = msg_handle; -- msg_context->u.sync.msg = msg; -- msg_context->u.sync.msg_len = msg_len; -- -- /* todo: should this check (completion_done() -- * == 1) for no one waiting? or do we need a -- * flag to tell us the completion has been -- * interrupted so we can free the message and -- * its context. This probably also solves the -- * message arriving after interruption todo -- * below -- */ -- -- /* complete message so caller knows it happened */ -- complete(&msg_context->u.sync.cmplt); -- break; -- } -- -- break; -- -- case VCHI_CALLBACK_BULK_RECEIVED: -- bulk_receive_cb(instance, bulk_ctx); -- break; -- -- case VCHI_CALLBACK_BULK_RECEIVE_ABORTED: -- bulk_abort_cb(instance, bulk_ctx); -- break; -- -- case VCHI_CALLBACK_SERVICE_CLOSED: -- /* TODO: consider if this requires action if received when -- * driver is not explicitly closing the service -- */ -- break; -- -- default: -- pr_err("Received unhandled message reason %d\n", reason); -- break; -- } --} -- --static int send_synchronous_mmal_msg(struct vchiq_mmal_instance *instance, -- struct mmal_msg *msg, -- unsigned int payload_len, -- struct mmal_msg **msg_out, -- VCHI_HELD_MSG_T *msg_handle_out) --{ -- struct mmal_msg_context *msg_context; -- int ret; -- unsigned long timeout; -- -- /* payload size must not cause message to exceed max size */ -- if (payload_len > -- (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) { -- pr_err("payload length %d exceeds max:%d\n", payload_len, -- (int)(MMAL_MSG_MAX_SIZE - -- sizeof(struct mmal_msg_header))); -- return -EINVAL; -- } -- -- msg_context = get_msg_context(instance); -- if (IS_ERR(msg_context)) -- return PTR_ERR(msg_context); -- -- init_completion(&msg_context->u.sync.cmplt); -- -- msg->h.magic = MMAL_MAGIC; -- msg->h.context = msg_context->handle; -- msg->h.status = 0; -- -- DBG_DUMP_MSG(msg, (sizeof(struct mmal_msg_header) + payload_len), -- ">>> sync message"); -- -- vchi_service_use(instance->handle); -- -- ret = vchi_queue_kernel_message(instance->handle, -- msg, -- sizeof(struct mmal_msg_header) + -- payload_len); -- -- vchi_service_release(instance->handle); -- -- if (ret) { -- pr_err("error %d queuing message\n", ret); -- release_msg_context(msg_context); -- return ret; -- } -- -- timeout = wait_for_completion_timeout(&msg_context->u.sync.cmplt, -- 3 * HZ); -- if (timeout == 0) { -- pr_err("timed out waiting for sync completion\n"); -- ret = -ETIME; -- /* todo: what happens if the message arrives after aborting */ -- release_msg_context(msg_context); -- return ret; -- } -- -- *msg_out = msg_context->u.sync.msg; -- *msg_handle_out = msg_context->u.sync.msg_handle; -- release_msg_context(msg_context); -- -- return 0; --} -- --static void dump_port_info(struct vchiq_mmal_port *port) --{ -- pr_debug("port handle:0x%x enabled:%d\n", port->handle, port->enabled); -- -- pr_debug("buffer minimum num:%d size:%d align:%d\n", -- port->minimum_buffer.num, -- port->minimum_buffer.size, port->minimum_buffer.alignment); -- -- pr_debug("buffer recommended num:%d size:%d align:%d\n", -- port->recommended_buffer.num, -- port->recommended_buffer.size, -- port->recommended_buffer.alignment); -- -- pr_debug("buffer current values num:%d size:%d align:%d\n", -- port->current_buffer.num, -- port->current_buffer.size, port->current_buffer.alignment); -- -- pr_debug("elementary stream: type:%d encoding:0x%x variant:0x%x\n", -- port->format.type, -- port->format.encoding, port->format.encoding_variant); -- -- pr_debug(" bitrate:%d flags:0x%x\n", -- port->format.bitrate, port->format.flags); -- -- if (port->format.type == MMAL_ES_TYPE_VIDEO) { -- pr_debug -- ("es video format: width:%d height:%d colourspace:0x%x\n", -- port->es.video.width, port->es.video.height, -- port->es.video.color_space); -- -- pr_debug(" : crop xywh %d,%d,%d,%d\n", -- port->es.video.crop.x, -- port->es.video.crop.y, -- port->es.video.crop.width, port->es.video.crop.height); -- pr_debug(" : framerate %d/%d aspect %d/%d\n", -- port->es.video.frame_rate.num, -- port->es.video.frame_rate.den, -- port->es.video.par.num, port->es.video.par.den); -- } --} -- --static void port_to_mmal_msg(struct vchiq_mmal_port *port, struct mmal_port *p) --{ -- /* todo do readonly fields need setting at all? */ -- p->type = port->type; -- p->index = port->index; -- p->index_all = 0; -- p->is_enabled = port->enabled; -- p->buffer_num_min = port->minimum_buffer.num; -- p->buffer_size_min = port->minimum_buffer.size; -- p->buffer_alignment_min = port->minimum_buffer.alignment; -- p->buffer_num_recommended = port->recommended_buffer.num; -- p->buffer_size_recommended = port->recommended_buffer.size; -- -- /* only three writable fields in a port */ -- p->buffer_num = port->current_buffer.num; -- p->buffer_size = port->current_buffer.size; -- p->userdata = (u32)(unsigned long)port; --} -- --static int port_info_set(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- pr_debug("setting port info port %p\n", port); -- if (!port) -- return -1; -- dump_port_info(port); -- -- m.h.type = MMAL_MSG_TYPE_PORT_INFO_SET; -- -- m.u.port_info_set.component_handle = port->component->handle; -- m.u.port_info_set.port_type = port->type; -- m.u.port_info_set.port_index = port->index; -- -- port_to_mmal_msg(port, &m.u.port_info_set.port); -- -- /* elementary stream format setup */ -- m.u.port_info_set.format.type = port->format.type; -- m.u.port_info_set.format.encoding = port->format.encoding; -- m.u.port_info_set.format.encoding_variant = -- port->format.encoding_variant; -- m.u.port_info_set.format.bitrate = port->format.bitrate; -- m.u.port_info_set.format.flags = port->format.flags; -- -- memcpy(&m.u.port_info_set.es, &port->es, -- sizeof(union mmal_es_specific_format)); -- -- m.u.port_info_set.format.extradata_size = port->format.extradata_size; -- memcpy(&m.u.port_info_set.extradata, port->format.extradata, -- port->format.extradata_size); -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(m.u.port_info_set), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_SET) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- /* return operation status */ -- ret = -rmsg->u.port_info_get_reply.status; -- -- pr_debug("%s:result:%d component:0x%x port:%d\n", __func__, ret, -- port->component->handle, port->handle); -- --release_msg: -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --/* use port info get message to retrieve port information */ --static int port_info_get(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- /* port info time */ -- m.h.type = MMAL_MSG_TYPE_PORT_INFO_GET; -- m.u.port_info_get.component_handle = port->component->handle; -- m.u.port_info_get.port_type = port->type; -- m.u.port_info_get.index = port->index; -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(m.u.port_info_get), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_GET) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- /* return operation status */ -- ret = -rmsg->u.port_info_get_reply.status; -- if (ret != MMAL_MSG_STATUS_SUCCESS) -- goto release_msg; -- -- if (rmsg->u.port_info_get_reply.port.is_enabled == 0) -- port->enabled = false; -- else -- port->enabled = true; -- -- /* copy the values out of the message */ -- port->handle = rmsg->u.port_info_get_reply.port_handle; -- -- /* port type and index cached to use on port info set because -- * it does not use a port handle -- */ -- port->type = rmsg->u.port_info_get_reply.port_type; -- port->index = rmsg->u.port_info_get_reply.port_index; -- -- port->minimum_buffer.num = -- rmsg->u.port_info_get_reply.port.buffer_num_min; -- port->minimum_buffer.size = -- rmsg->u.port_info_get_reply.port.buffer_size_min; -- port->minimum_buffer.alignment = -- rmsg->u.port_info_get_reply.port.buffer_alignment_min; -- -- port->recommended_buffer.alignment = -- rmsg->u.port_info_get_reply.port.buffer_alignment_min; -- port->recommended_buffer.num = -- rmsg->u.port_info_get_reply.port.buffer_num_recommended; -- -- port->current_buffer.num = rmsg->u.port_info_get_reply.port.buffer_num; -- port->current_buffer.size = -- rmsg->u.port_info_get_reply.port.buffer_size; -- -- /* stream format */ -- port->format.type = rmsg->u.port_info_get_reply.format.type; -- port->format.encoding = rmsg->u.port_info_get_reply.format.encoding; -- port->format.encoding_variant = -- rmsg->u.port_info_get_reply.format.encoding_variant; -- port->format.bitrate = rmsg->u.port_info_get_reply.format.bitrate; -- port->format.flags = rmsg->u.port_info_get_reply.format.flags; -- -- /* elementary stream format */ -- memcpy(&port->es, -- &rmsg->u.port_info_get_reply.es, -- sizeof(union mmal_es_specific_format)); -- port->format.es = &port->es; -- -- port->format.extradata_size = -- rmsg->u.port_info_get_reply.format.extradata_size; -- memcpy(port->format.extradata, -- rmsg->u.port_info_get_reply.extradata, -- port->format.extradata_size); -- -- pr_debug("received port info\n"); -- dump_port_info(port); -- --release_msg: -- -- pr_debug("%s:result:%d component:0x%x port:%d\n", -- __func__, ret, port->component->handle, port->handle); -- -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --/* create comonent on vc */ --static int create_component(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component, -- const char *name) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- /* build component create message */ -- m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE; -- m.u.component_create.client_component = (u32)(unsigned long)component; -- strncpy(m.u.component_create.name, name, -- sizeof(m.u.component_create.name)); -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(m.u.component_create), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != m.h.type) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- ret = -rmsg->u.component_create_reply.status; -- if (ret != MMAL_MSG_STATUS_SUCCESS) -- goto release_msg; -- -- /* a valid component response received */ -- component->handle = rmsg->u.component_create_reply.component_handle; -- component->inputs = rmsg->u.component_create_reply.input_num; -- component->outputs = rmsg->u.component_create_reply.output_num; -- component->clocks = rmsg->u.component_create_reply.clock_num; -- -- pr_debug("Component handle:0x%x in:%d out:%d clock:%d\n", -- component->handle, -- component->inputs, component->outputs, component->clocks); -- --release_msg: -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --/* destroys a component on vc */ --static int destroy_component(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- m.h.type = MMAL_MSG_TYPE_COMPONENT_DESTROY; -- m.u.component_destroy.component_handle = component->handle; -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(m.u.component_destroy), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != m.h.type) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- ret = -rmsg->u.component_destroy_reply.status; -- --release_msg: -- -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --/* enable a component on vc */ --static int enable_component(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- m.h.type = MMAL_MSG_TYPE_COMPONENT_ENABLE; -- m.u.component_enable.component_handle = component->handle; -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(m.u.component_enable), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != m.h.type) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- ret = -rmsg->u.component_enable_reply.status; -- --release_msg: -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --/* disable a component on vc */ --static int disable_component(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- m.h.type = MMAL_MSG_TYPE_COMPONENT_DISABLE; -- m.u.component_disable.component_handle = component->handle; -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(m.u.component_disable), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != m.h.type) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- ret = -rmsg->u.component_disable_reply.status; -- --release_msg: -- -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --/* get version of mmal implementation */ --static int get_version(struct vchiq_mmal_instance *instance, -- u32 *major_out, u32 *minor_out) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- m.h.type = MMAL_MSG_TYPE_GET_VERSION; -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(m.u.version), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != m.h.type) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- *major_out = rmsg->u.version.major; -- *minor_out = rmsg->u.version.minor; -- --release_msg: -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --/* do a port action with a port as a parameter */ --static int port_action_port(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- enum mmal_msg_port_action_type action_type) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- m.h.type = MMAL_MSG_TYPE_PORT_ACTION; -- m.u.port_action_port.component_handle = port->component->handle; -- m.u.port_action_port.port_handle = port->handle; -- m.u.port_action_port.action = action_type; -- -- port_to_mmal_msg(port, &m.u.port_action_port.port); -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(m.u.port_action_port), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- ret = -rmsg->u.port_action_reply.status; -- -- pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)\n", -- __func__, -- ret, port->component->handle, port->handle, -- port_action_type_names[action_type], action_type); -- --release_msg: -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --/* do a port action with handles as parameters */ --static int port_action_handle(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- enum mmal_msg_port_action_type action_type, -- u32 connect_component_handle, -- u32 connect_port_handle) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- m.h.type = MMAL_MSG_TYPE_PORT_ACTION; -- -- m.u.port_action_handle.component_handle = port->component->handle; -- m.u.port_action_handle.port_handle = port->handle; -- m.u.port_action_handle.action = action_type; -- -- m.u.port_action_handle.connect_component_handle = -- connect_component_handle; -- m.u.port_action_handle.connect_port_handle = connect_port_handle; -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(m.u.port_action_handle), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- ret = -rmsg->u.port_action_reply.status; -- -- pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d) connect component:0x%x connect port:%d\n", -- __func__, -- ret, port->component->handle, port->handle, -- port_action_type_names[action_type], -- action_type, connect_component_handle, connect_port_handle); -- --release_msg: -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --static int port_parameter_set(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- u32 parameter_id, void *value, u32 value_size) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_SET; -- -- m.u.port_parameter_set.component_handle = port->component->handle; -- m.u.port_parameter_set.port_handle = port->handle; -- m.u.port_parameter_set.id = parameter_id; -- m.u.port_parameter_set.size = (2 * sizeof(u32)) + value_size; -- memcpy(&m.u.port_parameter_set.value, value, value_size); -- -- ret = send_synchronous_mmal_msg(instance, &m, -- (4 * sizeof(u32)) + value_size, -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_SET) { -- /* got an unexpected message type in reply */ -- ret = -EINVAL; -- goto release_msg; -- } -- -- ret = -rmsg->u.port_parameter_set_reply.status; -- -- pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", -- __func__, -- ret, port->component->handle, port->handle, parameter_id); -- --release_msg: -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --static int port_parameter_get(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- u32 parameter_id, void *value, u32 *value_size) --{ -- int ret; -- struct mmal_msg m; -- struct mmal_msg *rmsg; -- VCHI_HELD_MSG_T rmsg_handle; -- -- m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_GET; -- -- m.u.port_parameter_get.component_handle = port->component->handle; -- m.u.port_parameter_get.port_handle = port->handle; -- m.u.port_parameter_get.id = parameter_id; -- m.u.port_parameter_get.size = (2 * sizeof(u32)) + *value_size; -- -- ret = send_synchronous_mmal_msg(instance, &m, -- sizeof(struct -- mmal_msg_port_parameter_get), -- &rmsg, &rmsg_handle); -- if (ret) -- return ret; -- -- if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_GET) { -- /* got an unexpected message type in reply */ -- pr_err("Incorrect reply type %d\n", rmsg->h.type); -- ret = -EINVAL; -- goto release_msg; -- } -- -- ret = -rmsg->u.port_parameter_get_reply.status; -- /* port_parameter_get_reply.size includes the header, -- * whilst *value_size doesn't. -- */ -- rmsg->u.port_parameter_get_reply.size -= (2 * sizeof(u32)); -- -- if (ret || rmsg->u.port_parameter_get_reply.size > *value_size) { -- /* Copy only as much as we have space for -- * but report true size of parameter -- */ -- memcpy(value, &rmsg->u.port_parameter_get_reply.value, -- *value_size); -- *value_size = rmsg->u.port_parameter_get_reply.size; -- } else { -- memcpy(value, &rmsg->u.port_parameter_get_reply.value, -- rmsg->u.port_parameter_get_reply.size); -- } -- -- pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, -- ret, port->component->handle, port->handle, parameter_id); -- --release_msg: -- vchi_held_msg_release(&rmsg_handle); -- -- return ret; --} -- --/* disables a port and drains buffers from it */ --static int port_disable(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port) --{ -- int ret; -- struct list_head *q, *buf_head; -- unsigned long flags = 0; -- -- if (!port->enabled) -- return 0; -- -- port->enabled = false; -- -- ret = port_action_port(instance, port, -- MMAL_MSG_PORT_ACTION_TYPE_DISABLE); -- if (ret == 0) { -- /* -- * Drain all queued buffers on port. This should only -- * apply to buffers that have been queued before the port -- * has been enabled. If the port has been enabled and buffers -- * passed, then the buffers should have been removed from this -- * list, and we should get the relevant callbacks via VCHIQ -- * to release the buffers. -- */ -- spin_lock_irqsave(&port->slock, flags); -- -- list_for_each_safe(buf_head, q, &port->buffers) { -- struct mmal_buffer *mmalbuf; -- -- mmalbuf = list_entry(buf_head, struct mmal_buffer, -- list); -- list_del(buf_head); -- if (port->buffer_cb) -- port->buffer_cb(instance, -- port, 0, mmalbuf, 0, 0, -- MMAL_TIME_UNKNOWN, -- MMAL_TIME_UNKNOWN); -- } -- -- spin_unlock_irqrestore(&port->slock, flags); -- -- ret = port_info_get(instance, port); -- } -- -- return ret; --} -- --/* enable a port */ --static int port_enable(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port) --{ -- unsigned int hdr_count; -- struct list_head *q, *buf_head; -- int ret; -- -- if (port->enabled) -- return 0; -- -- ret = port_action_port(instance, port, -- MMAL_MSG_PORT_ACTION_TYPE_ENABLE); -- if (ret) -- goto done; -- -- port->enabled = true; -- -- if (port->buffer_cb) { -- /* send buffer headers to videocore */ -- hdr_count = 1; -- list_for_each_safe(buf_head, q, &port->buffers) { -- struct mmal_buffer *mmalbuf; -- -- mmalbuf = list_entry(buf_head, struct mmal_buffer, -- list); -- ret = buffer_from_host(instance, port, mmalbuf); -- if (ret) -- goto done; -- -- list_del(buf_head); -- hdr_count++; -- if (hdr_count > port->current_buffer.num) -- break; -- } -- } -- -- ret = port_info_get(instance, port); -- --done: -- return ret; --} -- --/* ------------------------------------------------------------------ -- * Exported API -- *------------------------------------------------------------------ -- */ -- --int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- ret = port_info_set(instance, port); -- if (ret) -- goto release_unlock; -- -- /* read what has actually been set */ -- ret = port_info_get(instance, port); -- --release_unlock: -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- u32 parameter, void *value, u32 value_size) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- ret = port_parameter_set(instance, port, parameter, value, value_size); -- -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- u32 parameter, void *value, u32 *value_size) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- ret = port_parameter_get(instance, port, parameter, value, value_size); -- -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --/* enable a port -- * -- * enables a port and queues buffers for satisfying callbacks if we -- * provide a callback handler -- */ --int vchiq_mmal_port_enable(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- vchiq_mmal_buffer_cb buffer_cb) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- /* already enabled - noop */ -- if (port->enabled) { -- ret = 0; -- goto unlock; -- } -- -- port->buffer_cb = buffer_cb; -- -- ret = port_enable(instance, port); -- --unlock: -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- if (!port->enabled) { -- mutex_unlock(&instance->vchiq_mutex); -- return 0; -- } -- -- ret = port_disable(instance, port); -- -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --/* ports will be connected in a tunneled manner so data buffers -- * are not handled by client. -- */ --int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *src, -- struct vchiq_mmal_port *dst) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- /* disconnect ports if connected */ -- if (src->connected) { -- ret = port_disable(instance, src); -- if (ret) { -- pr_err("failed disabling src port(%d)\n", ret); -- goto release_unlock; -- } -- -- /* do not need to disable the destination port as they -- * are connected and it is done automatically -- */ -- -- ret = port_action_handle(instance, src, -- MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, -- src->connected->component->handle, -- src->connected->handle); -- if (ret < 0) { -- pr_err("failed disconnecting src port\n"); -- goto release_unlock; -- } -- src->connected->enabled = false; -- src->connected = NULL; -- } -- -- if (!dst) { -- /* do not make new connection */ -- ret = 0; -- pr_debug("not making new connection\n"); -- goto release_unlock; -- } -- -- /* copy src port format to dst */ -- dst->format.encoding = src->format.encoding; -- dst->es.video.width = src->es.video.width; -- dst->es.video.height = src->es.video.height; -- dst->es.video.crop.x = src->es.video.crop.x; -- dst->es.video.crop.y = src->es.video.crop.y; -- dst->es.video.crop.width = src->es.video.crop.width; -- dst->es.video.crop.height = src->es.video.crop.height; -- dst->es.video.frame_rate.num = src->es.video.frame_rate.num; -- dst->es.video.frame_rate.den = src->es.video.frame_rate.den; -- -- /* set new format */ -- ret = port_info_set(instance, dst); -- if (ret) { -- pr_debug("setting port info failed\n"); -- goto release_unlock; -- } -- -- /* read what has actually been set */ -- ret = port_info_get(instance, dst); -- if (ret) { -- pr_debug("read back port info failed\n"); -- goto release_unlock; -- } -- -- /* connect two ports together */ -- ret = port_action_handle(instance, src, -- MMAL_MSG_PORT_ACTION_TYPE_CONNECT, -- dst->component->handle, dst->handle); -- if (ret < 0) { -- pr_debug("connecting port %d:%d to %d:%d failed\n", -- src->component->handle, src->handle, -- dst->component->handle, dst->handle); -- goto release_unlock; -- } -- src->connected = dst; -- --release_unlock: -- -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- struct mmal_buffer *buffer) --{ -- unsigned long flags = 0; -- int ret; -- -- ret = buffer_from_host(instance, port, buffer); -- if (ret == -EINVAL) { -- /* Port is disabled. Queue for when it is enabled. */ -- spin_lock_irqsave(&port->slock, flags); -- list_add_tail(&buffer->list, &port->buffers); -- spin_unlock_irqrestore(&port->slock, flags); -- } -- -- return 0; --} -- --int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, -- struct mmal_buffer *buf) --{ -- struct mmal_msg_context *msg_context = get_msg_context(instance); -- -- if (IS_ERR(msg_context)) -- return (PTR_ERR(msg_context)); -- -- buf->msg_context = msg_context; -- return 0; --} -- --int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf) --{ -- struct mmal_msg_context *msg_context = buf->msg_context; -- -- if (msg_context) -- release_msg_context(msg_context); -- buf->msg_context = NULL; -- -- return 0; --} -- --/* Initialise a mmal component and its ports -- * -- */ --int vchiq_mmal_component_init(struct vchiq_mmal_instance *instance, -- const char *name, -- struct vchiq_mmal_component **component_out) --{ -- int ret; -- int idx; /* port index */ -- struct vchiq_mmal_component *component; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) { -- ret = -EINVAL; /* todo is this correct error? */ -- goto unlock; -- } -- -- component = &instance->component[instance->component_idx]; -- -- ret = create_component(instance, component, name); -- if (ret < 0) { -- pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", -- __func__, ret); -- goto unlock; -- } -- -- /* ports info needs gathering */ -- component->control.type = MMAL_PORT_TYPE_CONTROL; -- component->control.index = 0; -- component->control.component = component; -- spin_lock_init(&component->control.slock); -- INIT_LIST_HEAD(&component->control.buffers); -- ret = port_info_get(instance, &component->control); -- if (ret < 0) -- goto release_component; -- -- for (idx = 0; idx < component->inputs; idx++) { -- component->input[idx].type = MMAL_PORT_TYPE_INPUT; -- component->input[idx].index = idx; -- component->input[idx].component = component; -- spin_lock_init(&component->input[idx].slock); -- INIT_LIST_HEAD(&component->input[idx].buffers); -- ret = port_info_get(instance, &component->input[idx]); -- if (ret < 0) -- goto release_component; -- } -- -- for (idx = 0; idx < component->outputs; idx++) { -- component->output[idx].type = MMAL_PORT_TYPE_OUTPUT; -- component->output[idx].index = idx; -- component->output[idx].component = component; -- spin_lock_init(&component->output[idx].slock); -- INIT_LIST_HEAD(&component->output[idx].buffers); -- ret = port_info_get(instance, &component->output[idx]); -- if (ret < 0) -- goto release_component; -- } -- -- for (idx = 0; idx < component->clocks; idx++) { -- component->clock[idx].type = MMAL_PORT_TYPE_CLOCK; -- component->clock[idx].index = idx; -- component->clock[idx].component = component; -- spin_lock_init(&component->clock[idx].slock); -- INIT_LIST_HEAD(&component->clock[idx].buffers); -- ret = port_info_get(instance, &component->clock[idx]); -- if (ret < 0) -- goto release_component; -- } -- -- instance->component_idx++; -- -- *component_out = component; -- -- mutex_unlock(&instance->vchiq_mutex); -- -- return 0; -- --release_component: -- destroy_component(instance, component); --unlock: -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --/* -- * cause a mmal component to be destroyed -- */ --int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- if (component->enabled) -- ret = disable_component(instance, component); -- -- ret = destroy_component(instance, component); -- -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --/* -- * cause a mmal component to be enabled -- */ --int vchiq_mmal_component_enable(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- if (component->enabled) { -- mutex_unlock(&instance->vchiq_mutex); -- return 0; -- } -- -- ret = enable_component(instance, component); -- if (ret == 0) -- component->enabled = true; -- -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --/* -- * cause a mmal component to be enabled -- */ --int vchiq_mmal_component_disable(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- if (!component->enabled) { -- mutex_unlock(&instance->vchiq_mutex); -- return 0; -- } -- -- ret = disable_component(instance, component); -- if (ret == 0) -- component->enabled = false; -- -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --int vchiq_mmal_version(struct vchiq_mmal_instance *instance, -- u32 *major_out, u32 *minor_out) --{ -- int ret; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- ret = get_version(instance, major_out, minor_out); -- -- mutex_unlock(&instance->vchiq_mutex); -- -- return ret; --} -- --int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance) --{ -- int status = 0; -- -- if (!instance) -- return -EINVAL; -- -- if (mutex_lock_interruptible(&instance->vchiq_mutex)) -- return -EINTR; -- -- vchi_service_use(instance->handle); -- -- status = vchi_service_close(instance->handle); -- if (status != 0) -- pr_err("mmal-vchiq: VCHIQ close failed\n"); -- -- mutex_unlock(&instance->vchiq_mutex); -- -- flush_workqueue(instance->bulk_wq); -- destroy_workqueue(instance->bulk_wq); -- -- vfree(instance->bulk_scratch); -- -- idr_destroy(&instance->context_map); -- -- kfree(instance); -- -- return status; --} -- --int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance) --{ -- int status; -- struct vchiq_mmal_instance *instance; -- static VCHI_CONNECTION_T *vchi_connection; -- static VCHI_INSTANCE_T vchi_instance; -- SERVICE_CREATION_T params = { -- .version = VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER), -- .service_id = VC_MMAL_SERVER_NAME, -- .connection = vchi_connection, -- .rx_fifo_size = 0, -- .tx_fifo_size = 0, -- .callback = service_callback, -- .callback_param = NULL, -- .want_unaligned_bulk_rx = 1, -- .want_unaligned_bulk_tx = 1, -- .want_crc = 0 -- }; -- -- /* compile time checks to ensure structure size as they are -- * directly (de)serialised from memory. -- */ -- -- /* ensure the header structure has packed to the correct size */ -- BUILD_BUG_ON(sizeof(struct mmal_msg_header) != 24); -- -- /* ensure message structure does not exceed maximum length */ -- BUILD_BUG_ON(sizeof(struct mmal_msg) > MMAL_MSG_MAX_SIZE); -- -- /* mmal port struct is correct size */ -- BUILD_BUG_ON(sizeof(struct mmal_port) != 64); -- -- /* create a vchi instance */ -- status = vchi_initialise(&vchi_instance); -- if (status) { -- pr_err("Failed to initialise VCHI instance (status=%d)\n", -- status); -- return -EIO; -- } -- -- status = vchi_connect(NULL, 0, vchi_instance); -- if (status) { -- pr_err("Failed to connect VCHI instance (status=%d)\n", status); -- return -EIO; -- } -- -- instance = kzalloc(sizeof(*instance), GFP_KERNEL); -- -- if (!instance) -- return -ENOMEM; -- -- mutex_init(&instance->vchiq_mutex); -- -- instance->bulk_scratch = vmalloc(PAGE_SIZE); -- -- mutex_init(&instance->context_map_lock); -- idr_init_base(&instance->context_map, 1); -- -- params.callback_param = instance; -- -- instance->bulk_wq = alloc_ordered_workqueue("mmal-vchiq", -- WQ_MEM_RECLAIM); -- if (!instance->bulk_wq) -- goto err_free; -- -- status = vchi_service_open(vchi_instance, ¶ms, &instance->handle); -- if (status) { -- pr_err("Failed to open VCHI service connection (status=%d)\n", -- status); -- goto err_close_services; -- } -- -- vchi_service_release(instance->handle); -- -- *out_instance = instance; -- -- return 0; -- --err_close_services: -- vchi_service_close(instance->handle); -- destroy_workqueue(instance->bulk_wq); --err_free: -- vfree(instance->bulk_scratch); -- kfree(instance); -- return -ENODEV; --} ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -0,0 +1,1921 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom -+ * -+ * V4L2 driver MMAL vchiq interface code -+ */ -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "mmal-common.h" -+#include "mmal-vchiq.h" -+#include "mmal-msg.h" -+ -+#define USE_VCHIQ_ARM -+#include "interface/vchi/vchi.h" -+ -+MODULE_DESCRIPTION("BCM2835 MMAL VCHIQ interface"); -+MODULE_AUTHOR("Dave Stevenson, "); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION("0.0.1"); -+ -+/* maximum number of components supported */ -+#define VCHIQ_MMAL_MAX_COMPONENTS 4 -+ -+/*#define FULL_MSG_DUMP 1*/ -+ -+#ifdef DEBUG -+static const char *const msg_type_names[] = { -+ "UNKNOWN", -+ "QUIT", -+ "SERVICE_CLOSED", -+ "GET_VERSION", -+ "COMPONENT_CREATE", -+ "COMPONENT_DESTROY", -+ "COMPONENT_ENABLE", -+ "COMPONENT_DISABLE", -+ "PORT_INFO_GET", -+ "PORT_INFO_SET", -+ "PORT_ACTION", -+ "BUFFER_FROM_HOST", -+ "BUFFER_TO_HOST", -+ "GET_STATS", -+ "PORT_PARAMETER_SET", -+ "PORT_PARAMETER_GET", -+ "EVENT_TO_HOST", -+ "GET_CORE_STATS_FOR_PORT", -+ "OPAQUE_ALLOCATOR", -+ "CONSUME_MEM", -+ "LMK", -+ "OPAQUE_ALLOCATOR_DESC", -+ "DRM_GET_LHS32", -+ "DRM_GET_TIME", -+ "BUFFER_FROM_HOST_ZEROLEN", -+ "PORT_FLUSH", -+ "HOST_LOG", -+}; -+#endif -+ -+static const char *const port_action_type_names[] = { -+ "UNKNOWN", -+ "ENABLE", -+ "DISABLE", -+ "FLUSH", -+ "CONNECT", -+ "DISCONNECT", -+ "SET_REQUIREMENTS", -+}; -+ -+#if defined(DEBUG) -+#if defined(FULL_MSG_DUMP) -+#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) \ -+ do { \ -+ pr_debug(TITLE" type:%s(%d) length:%d\n", \ -+ msg_type_names[(MSG)->h.type], \ -+ (MSG)->h.type, (MSG_LEN)); \ -+ print_hex_dump(KERN_DEBUG, "<h.type], \ -+ (MSG)->h.type, (MSG_LEN)); \ -+ } -+#endif -+#else -+#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) -+#endif -+ -+struct vchiq_mmal_instance; -+ -+/* normal message context */ -+struct mmal_msg_context { -+ struct vchiq_mmal_instance *instance; -+ -+ /* Index in the context_map idr so that we can find the -+ * mmal_msg_context again when servicing the VCHI reply. -+ */ -+ int handle; -+ -+ union { -+ struct { -+ /* work struct for buffer_cb callback */ -+ struct work_struct work; -+ /* work struct for deferred callback */ -+ struct work_struct buffer_to_host_work; -+ /* mmal instance */ -+ struct vchiq_mmal_instance *instance; -+ /* mmal port */ -+ struct vchiq_mmal_port *port; -+ /* actual buffer used to store bulk reply */ -+ struct mmal_buffer *buffer; -+ /* amount of buffer used */ -+ unsigned long buffer_used; -+ /* MMAL buffer flags */ -+ u32 mmal_flags; -+ /* Presentation and Decode timestamps */ -+ s64 pts; -+ s64 dts; -+ -+ int status; /* context status */ -+ -+ } bulk; /* bulk data */ -+ -+ struct { -+ /* message handle to release */ -+ VCHI_HELD_MSG_T msg_handle; -+ /* pointer to received message */ -+ struct mmal_msg *msg; -+ /* received message length */ -+ u32 msg_len; -+ /* completion upon reply */ -+ struct completion cmplt; -+ } sync; /* synchronous response */ -+ } u; -+ -+}; -+ -+struct vchiq_mmal_instance { -+ VCHI_SERVICE_HANDLE_T handle; -+ -+ /* ensure serialised access to service */ -+ struct mutex vchiq_mutex; -+ -+ /* vmalloc page to receive scratch bulk xfers into */ -+ void *bulk_scratch; -+ -+ struct idr context_map; -+ /* protect accesses to context_map */ -+ struct mutex context_map_lock; -+ -+ /* component to use next */ -+ int component_idx; -+ struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS]; -+ -+ /* ordered workqueue to process all bulk operations */ -+ struct workqueue_struct *bulk_wq; -+}; -+ -+static struct mmal_msg_context * -+get_msg_context(struct vchiq_mmal_instance *instance) -+{ -+ struct mmal_msg_context *msg_context; -+ int handle; -+ -+ /* todo: should this be allocated from a pool to avoid kzalloc */ -+ msg_context = kzalloc(sizeof(*msg_context), GFP_KERNEL); -+ -+ if (!msg_context) -+ return ERR_PTR(-ENOMEM); -+ -+ /* Create an ID that will be passed along with our message so -+ * that when we service the VCHI reply, we can look up what -+ * message is being replied to. -+ */ -+ mutex_lock(&instance->context_map_lock); -+ handle = idr_alloc(&instance->context_map, msg_context, -+ 0, 0, GFP_KERNEL); -+ mutex_unlock(&instance->context_map_lock); -+ -+ if (handle < 0) { -+ kfree(msg_context); -+ return ERR_PTR(handle); -+ } -+ -+ msg_context->instance = instance; -+ msg_context->handle = handle; -+ -+ return msg_context; -+} -+ -+static struct mmal_msg_context * -+lookup_msg_context(struct vchiq_mmal_instance *instance, int handle) -+{ -+ return idr_find(&instance->context_map, handle); -+} -+ -+static void -+release_msg_context(struct mmal_msg_context *msg_context) -+{ -+ struct vchiq_mmal_instance *instance = msg_context->instance; -+ -+ mutex_lock(&instance->context_map_lock); -+ idr_remove(&instance->context_map, msg_context->handle); -+ mutex_unlock(&instance->context_map_lock); -+ kfree(msg_context); -+} -+ -+/* deals with receipt of event to host message */ -+static void event_to_host_cb(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, u32 msg_len) -+{ -+ pr_debug("unhandled event\n"); -+ pr_debug("component:%u port type:%d num:%d cmd:0x%x length:%d\n", -+ msg->u.event_to_host.client_component, -+ msg->u.event_to_host.port_type, -+ msg->u.event_to_host.port_num, -+ msg->u.event_to_host.cmd, msg->u.event_to_host.length); -+} -+ -+/* workqueue scheduled callback -+ * -+ * we do this because it is important we do not call any other vchiq -+ * sync calls from witin the message delivery thread -+ */ -+static void buffer_work_cb(struct work_struct *work) -+{ -+ struct mmal_msg_context *msg_context = -+ container_of(work, struct mmal_msg_context, u.bulk.work); -+ -+ atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); -+ -+ msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, -+ msg_context->u.bulk.port, -+ msg_context->u.bulk.status, -+ msg_context->u.bulk.buffer, -+ msg_context->u.bulk.buffer_used, -+ msg_context->u.bulk.mmal_flags, -+ msg_context->u.bulk.dts, -+ msg_context->u.bulk.pts); -+} -+ -+/* workqueue scheduled callback to handle receiving buffers -+ * -+ * VCHI will allow up to 4 bulk receives to be scheduled before blocking. -+ * If we block in the service_callback context then we can't process the -+ * VCHI_CALLBACK_BULK_RECEIVED message that would otherwise allow the blocked -+ * vchi_bulk_queue_receive() call to complete. -+ */ -+static void buffer_to_host_work_cb(struct work_struct *work) -+{ -+ struct mmal_msg_context *msg_context = -+ container_of(work, struct mmal_msg_context, -+ u.bulk.buffer_to_host_work); -+ struct vchiq_mmal_instance *instance = msg_context->instance; -+ unsigned long len = msg_context->u.bulk.buffer_used; -+ int ret; -+ -+ if (!len) -+ /* Dummy receive to ensure the buffers remain in order */ -+ len = 8; -+ /* queue the bulk submission */ -+ vchi_service_use(instance->handle); -+ ret = vchi_bulk_queue_receive(instance->handle, -+ msg_context->u.bulk.buffer->buffer, -+ /* Actual receive needs to be a multiple -+ * of 4 bytes -+ */ -+ (len + 3) & ~3, -+ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, -+ msg_context); -+ -+ vchi_service_release(instance->handle); -+ -+ if (ret != 0) -+ pr_err("%s: ctx: %p, vchi_bulk_queue_receive failed %d\n", -+ __func__, msg_context, ret); -+} -+ -+/* enqueue a bulk receive for a given message context */ -+static int bulk_receive(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, -+ struct mmal_msg_context *msg_context) -+{ -+ unsigned long rd_len; -+ -+ rd_len = msg->u.buffer_from_host.buffer_header.length; -+ -+ if (!msg_context->u.bulk.buffer) { -+ pr_err("bulk.buffer not configured - error in buffer_from_host\n"); -+ -+ /* todo: this is a serious error, we should never have -+ * committed a buffer_to_host operation to the mmal -+ * port without the buffer to back it up (underflow -+ * handling) and there is no obvious way to deal with -+ * this - how is the mmal servie going to react when -+ * we fail to do the xfer and reschedule a buffer when -+ * it arrives? perhaps a starved flag to indicate a -+ * waiting bulk receive? -+ */ -+ -+ return -EINVAL; -+ } -+ -+ /* ensure we do not overrun the available buffer */ -+ if (rd_len > msg_context->u.bulk.buffer->buffer_size) { -+ rd_len = msg_context->u.bulk.buffer->buffer_size; -+ pr_warn("short read as not enough receive buffer space\n"); -+ /* todo: is this the correct response, what happens to -+ * the rest of the message data? -+ */ -+ } -+ -+ /* store length */ -+ msg_context->u.bulk.buffer_used = rd_len; -+ msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; -+ msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; -+ -+ queue_work(msg_context->instance->bulk_wq, -+ &msg_context->u.bulk.buffer_to_host_work); -+ -+ return 0; -+} -+ -+/* data in message, memcpy from packet into output buffer */ -+static int inline_receive(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, -+ struct mmal_msg_context *msg_context) -+{ -+ memcpy(msg_context->u.bulk.buffer->buffer, -+ msg->u.buffer_from_host.short_data, -+ msg->u.buffer_from_host.payload_in_message); -+ -+ msg_context->u.bulk.buffer_used = -+ msg->u.buffer_from_host.payload_in_message; -+ -+ return 0; -+} -+ -+/* queue the buffer availability with MMAL_MSG_TYPE_BUFFER_FROM_HOST */ -+static int -+buffer_from_host(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, struct mmal_buffer *buf) -+{ -+ struct mmal_msg_context *msg_context; -+ struct mmal_msg m; -+ int ret; -+ -+ if (!port->enabled) -+ return -EINVAL; -+ -+ pr_debug("instance:%p buffer:%p\n", instance->handle, buf); -+ -+ /* get context */ -+ if (!buf->msg_context) { -+ pr_err("%s: msg_context not allocated, buf %p\n", __func__, -+ buf); -+ return -EINVAL; -+ } -+ msg_context = buf->msg_context; -+ -+ /* store bulk message context for when data arrives */ -+ msg_context->u.bulk.instance = instance; -+ msg_context->u.bulk.port = port; -+ msg_context->u.bulk.buffer = buf; -+ msg_context->u.bulk.buffer_used = 0; -+ -+ /* initialise work structure ready to schedule callback */ -+ INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb); -+ INIT_WORK(&msg_context->u.bulk.buffer_to_host_work, -+ buffer_to_host_work_cb); -+ -+ atomic_inc(&port->buffers_with_vpu); -+ -+ /* prep the buffer from host message */ -+ memset(&m, 0xbc, sizeof(m)); /* just to make debug clearer */ -+ -+ m.h.type = MMAL_MSG_TYPE_BUFFER_FROM_HOST; -+ m.h.magic = MMAL_MAGIC; -+ m.h.context = msg_context->handle; -+ m.h.status = 0; -+ -+ /* drvbuf is our private data passed back */ -+ m.u.buffer_from_host.drvbuf.magic = MMAL_MAGIC; -+ m.u.buffer_from_host.drvbuf.component_handle = port->component->handle; -+ m.u.buffer_from_host.drvbuf.port_handle = port->handle; -+ m.u.buffer_from_host.drvbuf.client_context = msg_context->handle; -+ -+ /* buffer header */ -+ m.u.buffer_from_host.buffer_header.cmd = 0; -+ m.u.buffer_from_host.buffer_header.data = -+ (u32)(unsigned long)buf->buffer; -+ m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; -+ m.u.buffer_from_host.buffer_header.length = 0; /* nothing used yet */ -+ m.u.buffer_from_host.buffer_header.offset = 0; /* no offset */ -+ m.u.buffer_from_host.buffer_header.flags = 0; /* no flags */ -+ m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; -+ m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; -+ -+ /* clear buffer type sepecific data */ -+ memset(&m.u.buffer_from_host.buffer_header_type_specific, 0, -+ sizeof(m.u.buffer_from_host.buffer_header_type_specific)); -+ -+ /* no payload in message */ -+ m.u.buffer_from_host.payload_in_message = 0; -+ -+ vchi_service_use(instance->handle); -+ -+ ret = vchi_queue_kernel_message(instance->handle, -+ &m, -+ sizeof(struct mmal_msg_header) + -+ sizeof(m.u.buffer_from_host)); -+ -+ vchi_service_release(instance->handle); -+ -+ return ret; -+} -+ -+/* deals with receipt of buffer to host message */ -+static void buffer_to_host_cb(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, u32 msg_len) -+{ -+ struct mmal_msg_context *msg_context; -+ u32 handle; -+ -+ pr_debug("%s: instance:%p msg:%p msg_len:%d\n", -+ __func__, instance, msg, msg_len); -+ -+ if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) { -+ handle = msg->u.buffer_from_host.drvbuf.client_context; -+ msg_context = lookup_msg_context(instance, handle); -+ -+ if (!msg_context) { -+ pr_err("drvbuf.client_context(%u) is invalid\n", -+ handle); -+ return; -+ } -+ } else { -+ pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n"); -+ return; -+ } -+ -+ msg_context->u.bulk.mmal_flags = -+ msg->u.buffer_from_host.buffer_header.flags; -+ -+ if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) { -+ /* message reception had an error */ -+ pr_warn("error %d in reply\n", msg->h.status); -+ -+ msg_context->u.bulk.status = msg->h.status; -+ -+ } else if (msg->u.buffer_from_host.buffer_header.length == 0) { -+ /* empty buffer */ -+ if (msg->u.buffer_from_host.buffer_header.flags & -+ MMAL_BUFFER_HEADER_FLAG_EOS) { -+ msg_context->u.bulk.status = -+ bulk_receive(instance, msg, msg_context); -+ if (msg_context->u.bulk.status == 0) -+ return; /* successful bulk submission, bulk -+ * completion will trigger callback -+ */ -+ } else { -+ /* do callback with empty buffer - not EOS though */ -+ msg_context->u.bulk.status = 0; -+ msg_context->u.bulk.buffer_used = 0; -+ } -+ } else if (msg->u.buffer_from_host.payload_in_message == 0) { -+ /* data is not in message, queue a bulk receive */ -+ msg_context->u.bulk.status = -+ bulk_receive(instance, msg, msg_context); -+ if (msg_context->u.bulk.status == 0) -+ return; /* successful bulk submission, bulk -+ * completion will trigger callback -+ */ -+ -+ /* failed to submit buffer, this will end badly */ -+ pr_err("error %d on bulk submission\n", -+ msg_context->u.bulk.status); -+ -+ } else if (msg->u.buffer_from_host.payload_in_message <= -+ MMAL_VC_SHORT_DATA) { -+ /* data payload within message */ -+ msg_context->u.bulk.status = inline_receive(instance, msg, -+ msg_context); -+ } else { -+ pr_err("message with invalid short payload\n"); -+ -+ /* signal error */ -+ msg_context->u.bulk.status = -EINVAL; -+ msg_context->u.bulk.buffer_used = -+ msg->u.buffer_from_host.payload_in_message; -+ } -+ -+ /* schedule the port callback */ -+ schedule_work(&msg_context->u.bulk.work); -+} -+ -+static void bulk_receive_cb(struct vchiq_mmal_instance *instance, -+ struct mmal_msg_context *msg_context) -+{ -+ msg_context->u.bulk.status = 0; -+ -+ /* schedule the port callback */ -+ schedule_work(&msg_context->u.bulk.work); -+} -+ -+static void bulk_abort_cb(struct vchiq_mmal_instance *instance, -+ struct mmal_msg_context *msg_context) -+{ -+ pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context); -+ -+ msg_context->u.bulk.status = -EINTR; -+ -+ schedule_work(&msg_context->u.bulk.work); -+} -+ -+/* incoming event service callback */ -+static void service_callback(void *param, -+ const VCHI_CALLBACK_REASON_T reason, -+ void *bulk_ctx) -+{ -+ struct vchiq_mmal_instance *instance = param; -+ int status; -+ u32 msg_len; -+ struct mmal_msg *msg; -+ VCHI_HELD_MSG_T msg_handle; -+ struct mmal_msg_context *msg_context; -+ -+ if (!instance) { -+ pr_err("Message callback passed NULL instance\n"); -+ return; -+ } -+ -+ switch (reason) { -+ case VCHI_CALLBACK_MSG_AVAILABLE: -+ status = vchi_msg_hold(instance->handle, (void **)&msg, -+ &msg_len, VCHI_FLAGS_NONE, &msg_handle); -+ if (status) { -+ pr_err("Unable to dequeue a message (%d)\n", status); -+ break; -+ } -+ -+ DBG_DUMP_MSG(msg, msg_len, "<<< reply message"); -+ -+ /* handling is different for buffer messages */ -+ switch (msg->h.type) { -+ case MMAL_MSG_TYPE_BUFFER_FROM_HOST: -+ vchi_held_msg_release(&msg_handle); -+ break; -+ -+ case MMAL_MSG_TYPE_EVENT_TO_HOST: -+ event_to_host_cb(instance, msg, msg_len); -+ vchi_held_msg_release(&msg_handle); -+ -+ break; -+ -+ case MMAL_MSG_TYPE_BUFFER_TO_HOST: -+ buffer_to_host_cb(instance, msg, msg_len); -+ vchi_held_msg_release(&msg_handle); -+ break; -+ -+ default: -+ /* messages dependent on header context to complete */ -+ if (!msg->h.context) { -+ pr_err("received message context was null!\n"); -+ vchi_held_msg_release(&msg_handle); -+ break; -+ } -+ -+ msg_context = lookup_msg_context(instance, -+ msg->h.context); -+ if (!msg_context) { -+ pr_err("received invalid message context %u!\n", -+ msg->h.context); -+ vchi_held_msg_release(&msg_handle); -+ break; -+ } -+ -+ /* fill in context values */ -+ msg_context->u.sync.msg_handle = msg_handle; -+ msg_context->u.sync.msg = msg; -+ msg_context->u.sync.msg_len = msg_len; -+ -+ /* todo: should this check (completion_done() -+ * == 1) for no one waiting? or do we need a -+ * flag to tell us the completion has been -+ * interrupted so we can free the message and -+ * its context. This probably also solves the -+ * message arriving after interruption todo -+ * below -+ */ -+ -+ /* complete message so caller knows it happened */ -+ complete(&msg_context->u.sync.cmplt); -+ break; -+ } -+ -+ break; -+ -+ case VCHI_CALLBACK_BULK_RECEIVED: -+ bulk_receive_cb(instance, bulk_ctx); -+ break; -+ -+ case VCHI_CALLBACK_BULK_RECEIVE_ABORTED: -+ bulk_abort_cb(instance, bulk_ctx); -+ break; -+ -+ case VCHI_CALLBACK_SERVICE_CLOSED: -+ /* TODO: consider if this requires action if received when -+ * driver is not explicitly closing the service -+ */ -+ break; -+ -+ default: -+ pr_err("Received unhandled message reason %d\n", reason); -+ break; -+ } -+} -+ -+static int send_synchronous_mmal_msg(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, -+ unsigned int payload_len, -+ struct mmal_msg **msg_out, -+ VCHI_HELD_MSG_T *msg_handle_out) -+{ -+ struct mmal_msg_context *msg_context; -+ int ret; -+ unsigned long timeout; -+ -+ /* payload size must not cause message to exceed max size */ -+ if (payload_len > -+ (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) { -+ pr_err("payload length %d exceeds max:%d\n", payload_len, -+ (int)(MMAL_MSG_MAX_SIZE - -+ sizeof(struct mmal_msg_header))); -+ return -EINVAL; -+ } -+ -+ msg_context = get_msg_context(instance); -+ if (IS_ERR(msg_context)) -+ return PTR_ERR(msg_context); -+ -+ init_completion(&msg_context->u.sync.cmplt); -+ -+ msg->h.magic = MMAL_MAGIC; -+ msg->h.context = msg_context->handle; -+ msg->h.status = 0; -+ -+ DBG_DUMP_MSG(msg, (sizeof(struct mmal_msg_header) + payload_len), -+ ">>> sync message"); -+ -+ vchi_service_use(instance->handle); -+ -+ ret = vchi_queue_kernel_message(instance->handle, -+ msg, -+ sizeof(struct mmal_msg_header) + -+ payload_len); -+ -+ vchi_service_release(instance->handle); -+ -+ if (ret) { -+ pr_err("error %d queuing message\n", ret); -+ release_msg_context(msg_context); -+ return ret; -+ } -+ -+ timeout = wait_for_completion_timeout(&msg_context->u.sync.cmplt, -+ 3 * HZ); -+ if (timeout == 0) { -+ pr_err("timed out waiting for sync completion\n"); -+ ret = -ETIME; -+ /* todo: what happens if the message arrives after aborting */ -+ release_msg_context(msg_context); -+ return ret; -+ } -+ -+ *msg_out = msg_context->u.sync.msg; -+ *msg_handle_out = msg_context->u.sync.msg_handle; -+ release_msg_context(msg_context); -+ -+ return 0; -+} -+ -+static void dump_port_info(struct vchiq_mmal_port *port) -+{ -+ pr_debug("port handle:0x%x enabled:%d\n", port->handle, port->enabled); -+ -+ pr_debug("buffer minimum num:%d size:%d align:%d\n", -+ port->minimum_buffer.num, -+ port->minimum_buffer.size, port->minimum_buffer.alignment); -+ -+ pr_debug("buffer recommended num:%d size:%d align:%d\n", -+ port->recommended_buffer.num, -+ port->recommended_buffer.size, -+ port->recommended_buffer.alignment); -+ -+ pr_debug("buffer current values num:%d size:%d align:%d\n", -+ port->current_buffer.num, -+ port->current_buffer.size, port->current_buffer.alignment); -+ -+ pr_debug("elementary stream: type:%d encoding:0x%x variant:0x%x\n", -+ port->format.type, -+ port->format.encoding, port->format.encoding_variant); -+ -+ pr_debug(" bitrate:%d flags:0x%x\n", -+ port->format.bitrate, port->format.flags); -+ -+ if (port->format.type == MMAL_ES_TYPE_VIDEO) { -+ pr_debug -+ ("es video format: width:%d height:%d colourspace:0x%x\n", -+ port->es.video.width, port->es.video.height, -+ port->es.video.color_space); -+ -+ pr_debug(" : crop xywh %d,%d,%d,%d\n", -+ port->es.video.crop.x, -+ port->es.video.crop.y, -+ port->es.video.crop.width, port->es.video.crop.height); -+ pr_debug(" : framerate %d/%d aspect %d/%d\n", -+ port->es.video.frame_rate.num, -+ port->es.video.frame_rate.den, -+ port->es.video.par.num, port->es.video.par.den); -+ } -+} -+ -+static void port_to_mmal_msg(struct vchiq_mmal_port *port, struct mmal_port *p) -+{ -+ /* todo do readonly fields need setting at all? */ -+ p->type = port->type; -+ p->index = port->index; -+ p->index_all = 0; -+ p->is_enabled = port->enabled; -+ p->buffer_num_min = port->minimum_buffer.num; -+ p->buffer_size_min = port->minimum_buffer.size; -+ p->buffer_alignment_min = port->minimum_buffer.alignment; -+ p->buffer_num_recommended = port->recommended_buffer.num; -+ p->buffer_size_recommended = port->recommended_buffer.size; -+ -+ /* only three writable fields in a port */ -+ p->buffer_num = port->current_buffer.num; -+ p->buffer_size = port->current_buffer.size; -+ p->userdata = (u32)(unsigned long)port; -+} -+ -+static int port_info_set(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ pr_debug("setting port info port %p\n", port); -+ if (!port) -+ return -1; -+ dump_port_info(port); -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_INFO_SET; -+ -+ m.u.port_info_set.component_handle = port->component->handle; -+ m.u.port_info_set.port_type = port->type; -+ m.u.port_info_set.port_index = port->index; -+ -+ port_to_mmal_msg(port, &m.u.port_info_set.port); -+ -+ /* elementary stream format setup */ -+ m.u.port_info_set.format.type = port->format.type; -+ m.u.port_info_set.format.encoding = port->format.encoding; -+ m.u.port_info_set.format.encoding_variant = -+ port->format.encoding_variant; -+ m.u.port_info_set.format.bitrate = port->format.bitrate; -+ m.u.port_info_set.format.flags = port->format.flags; -+ -+ memcpy(&m.u.port_info_set.es, &port->es, -+ sizeof(union mmal_es_specific_format)); -+ -+ m.u.port_info_set.format.extradata_size = port->format.extradata_size; -+ memcpy(&m.u.port_info_set.extradata, port->format.extradata, -+ port->format.extradata_size); -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.port_info_set), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_SET) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ /* return operation status */ -+ ret = -rmsg->u.port_info_get_reply.status; -+ -+ pr_debug("%s:result:%d component:0x%x port:%d\n", __func__, ret, -+ port->component->handle, port->handle); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* use port info get message to retrieve port information */ -+static int port_info_get(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ /* port info time */ -+ m.h.type = MMAL_MSG_TYPE_PORT_INFO_GET; -+ m.u.port_info_get.component_handle = port->component->handle; -+ m.u.port_info_get.port_type = port->type; -+ m.u.port_info_get.index = port->index; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.port_info_get), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_GET) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ /* return operation status */ -+ ret = -rmsg->u.port_info_get_reply.status; -+ if (ret != MMAL_MSG_STATUS_SUCCESS) -+ goto release_msg; -+ -+ if (rmsg->u.port_info_get_reply.port.is_enabled == 0) -+ port->enabled = false; -+ else -+ port->enabled = true; -+ -+ /* copy the values out of the message */ -+ port->handle = rmsg->u.port_info_get_reply.port_handle; -+ -+ /* port type and index cached to use on port info set because -+ * it does not use a port handle -+ */ -+ port->type = rmsg->u.port_info_get_reply.port_type; -+ port->index = rmsg->u.port_info_get_reply.port_index; -+ -+ port->minimum_buffer.num = -+ rmsg->u.port_info_get_reply.port.buffer_num_min; -+ port->minimum_buffer.size = -+ rmsg->u.port_info_get_reply.port.buffer_size_min; -+ port->minimum_buffer.alignment = -+ rmsg->u.port_info_get_reply.port.buffer_alignment_min; -+ -+ port->recommended_buffer.alignment = -+ rmsg->u.port_info_get_reply.port.buffer_alignment_min; -+ port->recommended_buffer.num = -+ rmsg->u.port_info_get_reply.port.buffer_num_recommended; -+ -+ port->current_buffer.num = rmsg->u.port_info_get_reply.port.buffer_num; -+ port->current_buffer.size = -+ rmsg->u.port_info_get_reply.port.buffer_size; -+ -+ /* stream format */ -+ port->format.type = rmsg->u.port_info_get_reply.format.type; -+ port->format.encoding = rmsg->u.port_info_get_reply.format.encoding; -+ port->format.encoding_variant = -+ rmsg->u.port_info_get_reply.format.encoding_variant; -+ port->format.bitrate = rmsg->u.port_info_get_reply.format.bitrate; -+ port->format.flags = rmsg->u.port_info_get_reply.format.flags; -+ -+ /* elementary stream format */ -+ memcpy(&port->es, -+ &rmsg->u.port_info_get_reply.es, -+ sizeof(union mmal_es_specific_format)); -+ port->format.es = &port->es; -+ -+ port->format.extradata_size = -+ rmsg->u.port_info_get_reply.format.extradata_size; -+ memcpy(port->format.extradata, -+ rmsg->u.port_info_get_reply.extradata, -+ port->format.extradata_size); -+ -+ pr_debug("received port info\n"); -+ dump_port_info(port); -+ -+release_msg: -+ -+ pr_debug("%s:result:%d component:0x%x port:%d\n", -+ __func__, ret, port->component->handle, port->handle); -+ -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* create comonent on vc */ -+static int create_component(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component, -+ const char *name) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ /* build component create message */ -+ m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE; -+ m.u.component_create.client_component = (u32)(unsigned long)component; -+ strncpy(m.u.component_create.name, name, -+ sizeof(m.u.component_create.name)); -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.component_create), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.component_create_reply.status; -+ if (ret != MMAL_MSG_STATUS_SUCCESS) -+ goto release_msg; -+ -+ /* a valid component response received */ -+ component->handle = rmsg->u.component_create_reply.component_handle; -+ component->inputs = rmsg->u.component_create_reply.input_num; -+ component->outputs = rmsg->u.component_create_reply.output_num; -+ component->clocks = rmsg->u.component_create_reply.clock_num; -+ -+ pr_debug("Component handle:0x%x in:%d out:%d clock:%d\n", -+ component->handle, -+ component->inputs, component->outputs, component->clocks); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* destroys a component on vc */ -+static int destroy_component(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_COMPONENT_DESTROY; -+ m.u.component_destroy.component_handle = component->handle; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.component_destroy), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.component_destroy_reply.status; -+ -+release_msg: -+ -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* enable a component on vc */ -+static int enable_component(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_COMPONENT_ENABLE; -+ m.u.component_enable.component_handle = component->handle; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.component_enable), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.component_enable_reply.status; -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* disable a component on vc */ -+static int disable_component(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_COMPONENT_DISABLE; -+ m.u.component_disable.component_handle = component->handle; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.component_disable), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.component_disable_reply.status; -+ -+release_msg: -+ -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* get version of mmal implementation */ -+static int get_version(struct vchiq_mmal_instance *instance, -+ u32 *major_out, u32 *minor_out) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_GET_VERSION; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.version), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ *major_out = rmsg->u.version.major; -+ *minor_out = rmsg->u.version.minor; -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* do a port action with a port as a parameter */ -+static int port_action_port(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ enum mmal_msg_port_action_type action_type) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; -+ m.u.port_action_port.component_handle = port->component->handle; -+ m.u.port_action_port.port_handle = port->handle; -+ m.u.port_action_port.action = action_type; -+ -+ port_to_mmal_msg(port, &m.u.port_action_port.port); -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.port_action_port), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.port_action_reply.status; -+ -+ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)\n", -+ __func__, -+ ret, port->component->handle, port->handle, -+ port_action_type_names[action_type], action_type); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* do a port action with handles as parameters */ -+static int port_action_handle(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ enum mmal_msg_port_action_type action_type, -+ u32 connect_component_handle, -+ u32 connect_port_handle) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; -+ -+ m.u.port_action_handle.component_handle = port->component->handle; -+ m.u.port_action_handle.port_handle = port->handle; -+ m.u.port_action_handle.action = action_type; -+ -+ m.u.port_action_handle.connect_component_handle = -+ connect_component_handle; -+ m.u.port_action_handle.connect_port_handle = connect_port_handle; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.port_action_handle), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.port_action_reply.status; -+ -+ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d) connect component:0x%x connect port:%d\n", -+ __func__, -+ ret, port->component->handle, port->handle, -+ port_action_type_names[action_type], -+ action_type, connect_component_handle, connect_port_handle); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+static int port_parameter_set(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter_id, void *value, u32 value_size) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_SET; -+ -+ m.u.port_parameter_set.component_handle = port->component->handle; -+ m.u.port_parameter_set.port_handle = port->handle; -+ m.u.port_parameter_set.id = parameter_id; -+ m.u.port_parameter_set.size = (2 * sizeof(u32)) + value_size; -+ memcpy(&m.u.port_parameter_set.value, value, value_size); -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ (4 * sizeof(u32)) + value_size, -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_SET) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.port_parameter_set_reply.status; -+ -+ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", -+ __func__, -+ ret, port->component->handle, port->handle, parameter_id); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+static int port_parameter_get(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter_id, void *value, u32 *value_size) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_GET; -+ -+ m.u.port_parameter_get.component_handle = port->component->handle; -+ m.u.port_parameter_get.port_handle = port->handle; -+ m.u.port_parameter_get.id = parameter_id; -+ m.u.port_parameter_get.size = (2 * sizeof(u32)) + *value_size; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(struct -+ mmal_msg_port_parameter_get), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_GET) { -+ /* got an unexpected message type in reply */ -+ pr_err("Incorrect reply type %d\n", rmsg->h.type); -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.port_parameter_get_reply.status; -+ /* port_parameter_get_reply.size includes the header, -+ * whilst *value_size doesn't. -+ */ -+ rmsg->u.port_parameter_get_reply.size -= (2 * sizeof(u32)); -+ -+ if (ret || rmsg->u.port_parameter_get_reply.size > *value_size) { -+ /* Copy only as much as we have space for -+ * but report true size of parameter -+ */ -+ memcpy(value, &rmsg->u.port_parameter_get_reply.value, -+ *value_size); -+ *value_size = rmsg->u.port_parameter_get_reply.size; -+ } else { -+ memcpy(value, &rmsg->u.port_parameter_get_reply.value, -+ rmsg->u.port_parameter_get_reply.size); -+ } -+ -+ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, -+ ret, port->component->handle, port->handle, parameter_id); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* disables a port and drains buffers from it */ -+static int port_disable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ struct list_head *q, *buf_head; -+ unsigned long flags = 0; -+ -+ if (!port->enabled) -+ return 0; -+ -+ port->enabled = false; -+ -+ ret = port_action_port(instance, port, -+ MMAL_MSG_PORT_ACTION_TYPE_DISABLE); -+ if (ret == 0) { -+ /* -+ * Drain all queued buffers on port. This should only -+ * apply to buffers that have been queued before the port -+ * has been enabled. If the port has been enabled and buffers -+ * passed, then the buffers should have been removed from this -+ * list, and we should get the relevant callbacks via VCHIQ -+ * to release the buffers. -+ */ -+ spin_lock_irqsave(&port->slock, flags); -+ -+ list_for_each_safe(buf_head, q, &port->buffers) { -+ struct mmal_buffer *mmalbuf; -+ -+ mmalbuf = list_entry(buf_head, struct mmal_buffer, -+ list); -+ list_del(buf_head); -+ if (port->buffer_cb) -+ port->buffer_cb(instance, -+ port, 0, mmalbuf, 0, 0, -+ MMAL_TIME_UNKNOWN, -+ MMAL_TIME_UNKNOWN); -+ } -+ -+ spin_unlock_irqrestore(&port->slock, flags); -+ -+ ret = port_info_get(instance, port); -+ } -+ -+ return ret; -+} -+ -+/* enable a port */ -+static int port_enable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ unsigned int hdr_count; -+ struct list_head *q, *buf_head; -+ int ret; -+ -+ if (port->enabled) -+ return 0; -+ -+ ret = port_action_port(instance, port, -+ MMAL_MSG_PORT_ACTION_TYPE_ENABLE); -+ if (ret) -+ goto done; -+ -+ port->enabled = true; -+ -+ if (port->buffer_cb) { -+ /* send buffer headers to videocore */ -+ hdr_count = 1; -+ list_for_each_safe(buf_head, q, &port->buffers) { -+ struct mmal_buffer *mmalbuf; -+ -+ mmalbuf = list_entry(buf_head, struct mmal_buffer, -+ list); -+ ret = buffer_from_host(instance, port, mmalbuf); -+ if (ret) -+ goto done; -+ -+ list_del(buf_head); -+ hdr_count++; -+ if (hdr_count > port->current_buffer.num) -+ break; -+ } -+ } -+ -+ ret = port_info_get(instance, port); -+ -+done: -+ return ret; -+} -+ -+/* ------------------------------------------------------------------ -+ * Exported API -+ *------------------------------------------------------------------ -+ */ -+ -+int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ ret = port_info_set(instance, port); -+ if (ret) -+ goto release_unlock; -+ -+ /* read what has actually been set */ -+ ret = port_info_get(instance, port); -+ -+release_unlock: -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_port_set_format); -+ -+int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter, void *value, u32 value_size) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ ret = port_parameter_set(instance, port, parameter, value, value_size); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_port_parameter_set); -+ -+int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter, void *value, u32 *value_size) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ ret = port_parameter_get(instance, port, parameter, value, value_size); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_port_parameter_get); -+ -+/* enable a port -+ * -+ * enables a port and queues buffers for satisfying callbacks if we -+ * provide a callback handler -+ */ -+int vchiq_mmal_port_enable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ vchiq_mmal_buffer_cb buffer_cb) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ /* already enabled - noop */ -+ if (port->enabled) { -+ ret = 0; -+ goto unlock; -+ } -+ -+ port->buffer_cb = buffer_cb; -+ -+ ret = port_enable(instance, port); -+ -+unlock: -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_port_enable); -+ -+int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (!port->enabled) { -+ mutex_unlock(&instance->vchiq_mutex); -+ return 0; -+ } -+ -+ ret = port_disable(instance, port); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_port_disable); -+ -+/* ports will be connected in a tunneled manner so data buffers -+ * are not handled by client. -+ */ -+int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *src, -+ struct vchiq_mmal_port *dst) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ /* disconnect ports if connected */ -+ if (src->connected) { -+ ret = port_disable(instance, src); -+ if (ret) { -+ pr_err("failed disabling src port(%d)\n", ret); -+ goto release_unlock; -+ } -+ -+ /* do not need to disable the destination port as they -+ * are connected and it is done automatically -+ */ -+ -+ ret = port_action_handle(instance, src, -+ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, -+ src->connected->component->handle, -+ src->connected->handle); -+ if (ret < 0) { -+ pr_err("failed disconnecting src port\n"); -+ goto release_unlock; -+ } -+ src->connected->enabled = false; -+ src->connected = NULL; -+ } -+ -+ if (!dst) { -+ /* do not make new connection */ -+ ret = 0; -+ pr_debug("not making new connection\n"); -+ goto release_unlock; -+ } -+ -+ /* copy src port format to dst */ -+ dst->format.encoding = src->format.encoding; -+ dst->es.video.width = src->es.video.width; -+ dst->es.video.height = src->es.video.height; -+ dst->es.video.crop.x = src->es.video.crop.x; -+ dst->es.video.crop.y = src->es.video.crop.y; -+ dst->es.video.crop.width = src->es.video.crop.width; -+ dst->es.video.crop.height = src->es.video.crop.height; -+ dst->es.video.frame_rate.num = src->es.video.frame_rate.num; -+ dst->es.video.frame_rate.den = src->es.video.frame_rate.den; -+ -+ /* set new format */ -+ ret = port_info_set(instance, dst); -+ if (ret) { -+ pr_debug("setting port info failed\n"); -+ goto release_unlock; -+ } -+ -+ /* read what has actually been set */ -+ ret = port_info_get(instance, dst); -+ if (ret) { -+ pr_debug("read back port info failed\n"); -+ goto release_unlock; -+ } -+ -+ /* connect two ports together */ -+ ret = port_action_handle(instance, src, -+ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, -+ dst->component->handle, dst->handle); -+ if (ret < 0) { -+ pr_debug("connecting port %d:%d to %d:%d failed\n", -+ src->component->handle, src->handle, -+ dst->component->handle, dst->handle); -+ goto release_unlock; -+ } -+ src->connected = dst; -+ -+release_unlock: -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_port_connect_tunnel); -+ -+int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ struct mmal_buffer *buffer) -+{ -+ unsigned long flags = 0; -+ int ret; -+ -+ ret = buffer_from_host(instance, port, buffer); -+ if (ret == -EINVAL) { -+ /* Port is disabled. Queue for when it is enabled. */ -+ spin_lock_irqsave(&port->slock, flags); -+ list_add_tail(&buffer->list, &port->buffers); -+ spin_unlock_irqrestore(&port->slock, flags); -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_submit_buffer); -+ -+int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, -+ struct mmal_buffer *buf) -+{ -+ struct mmal_msg_context *msg_context = get_msg_context(instance); -+ -+ if (IS_ERR(msg_context)) -+ return (PTR_ERR(msg_context)); -+ -+ buf->msg_context = msg_context; -+ return 0; -+} -+EXPORT_SYMBOL_GPL(mmal_vchi_buffer_init); -+ -+int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf) -+{ -+ struct mmal_msg_context *msg_context = buf->msg_context; -+ -+ if (msg_context) -+ release_msg_context(msg_context); -+ buf->msg_context = NULL; -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(mmal_vchi_buffer_cleanup); -+ -+/* Initialise a mmal component and its ports -+ * -+ */ -+int vchiq_mmal_component_init(struct vchiq_mmal_instance *instance, -+ const char *name, -+ struct vchiq_mmal_component **component_out) -+{ -+ int ret; -+ int idx; /* port index */ -+ struct vchiq_mmal_component *component; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) { -+ ret = -EINVAL; /* todo is this correct error? */ -+ goto unlock; -+ } -+ -+ component = &instance->component[instance->component_idx]; -+ -+ ret = create_component(instance, component, name); -+ if (ret < 0) { -+ pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", -+ __func__, ret); -+ goto unlock; -+ } -+ -+ /* ports info needs gathering */ -+ component->control.type = MMAL_PORT_TYPE_CONTROL; -+ component->control.index = 0; -+ component->control.component = component; -+ spin_lock_init(&component->control.slock); -+ INIT_LIST_HEAD(&component->control.buffers); -+ ret = port_info_get(instance, &component->control); -+ if (ret < 0) -+ goto release_component; -+ -+ for (idx = 0; idx < component->inputs; idx++) { -+ component->input[idx].type = MMAL_PORT_TYPE_INPUT; -+ component->input[idx].index = idx; -+ component->input[idx].component = component; -+ spin_lock_init(&component->input[idx].slock); -+ INIT_LIST_HEAD(&component->input[idx].buffers); -+ ret = port_info_get(instance, &component->input[idx]); -+ if (ret < 0) -+ goto release_component; -+ } -+ -+ for (idx = 0; idx < component->outputs; idx++) { -+ component->output[idx].type = MMAL_PORT_TYPE_OUTPUT; -+ component->output[idx].index = idx; -+ component->output[idx].component = component; -+ spin_lock_init(&component->output[idx].slock); -+ INIT_LIST_HEAD(&component->output[idx].buffers); -+ ret = port_info_get(instance, &component->output[idx]); -+ if (ret < 0) -+ goto release_component; -+ } -+ -+ for (idx = 0; idx < component->clocks; idx++) { -+ component->clock[idx].type = MMAL_PORT_TYPE_CLOCK; -+ component->clock[idx].index = idx; -+ component->clock[idx].component = component; -+ spin_lock_init(&component->clock[idx].slock); -+ INIT_LIST_HEAD(&component->clock[idx].buffers); -+ ret = port_info_get(instance, &component->clock[idx]); -+ if (ret < 0) -+ goto release_component; -+ } -+ -+ instance->component_idx++; -+ -+ *component_out = component; -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return 0; -+ -+release_component: -+ destroy_component(instance, component); -+unlock: -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_component_init); -+ -+/* -+ * cause a mmal component to be destroyed -+ */ -+int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (component->enabled) -+ ret = disable_component(instance, component); -+ -+ ret = destroy_component(instance, component); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_component_finalise); -+ -+/* -+ * cause a mmal component to be enabled -+ */ -+int vchiq_mmal_component_enable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (component->enabled) { -+ mutex_unlock(&instance->vchiq_mutex); -+ return 0; -+ } -+ -+ ret = enable_component(instance, component); -+ if (ret == 0) -+ component->enabled = true; -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_component_enable); -+ -+/* -+ * cause a mmal component to be enabled -+ */ -+int vchiq_mmal_component_disable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (!component->enabled) { -+ mutex_unlock(&instance->vchiq_mutex); -+ return 0; -+ } -+ -+ ret = disable_component(instance, component); -+ if (ret == 0) -+ component->enabled = false; -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_component_disable); -+ -+int vchiq_mmal_version(struct vchiq_mmal_instance *instance, -+ u32 *major_out, u32 *minor_out) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ ret = get_version(instance, major_out, minor_out); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_version); -+ -+int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance) -+{ -+ int status = 0; -+ -+ if (!instance) -+ return -EINVAL; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ vchi_service_use(instance->handle); -+ -+ status = vchi_service_close(instance->handle); -+ if (status != 0) -+ pr_err("mmal-vchiq: VCHIQ close failed\n"); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ flush_workqueue(instance->bulk_wq); -+ destroy_workqueue(instance->bulk_wq); -+ -+ vfree(instance->bulk_scratch); -+ -+ idr_destroy(&instance->context_map); -+ -+ kfree(instance); -+ -+ return status; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_finalise); -+ -+int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance) -+{ -+ int status; -+ struct vchiq_mmal_instance *instance; -+ static VCHI_CONNECTION_T *vchi_connection; -+ static VCHI_INSTANCE_T vchi_instance; -+ SERVICE_CREATION_T params = { -+ .version = VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER), -+ .service_id = VC_MMAL_SERVER_NAME, -+ .connection = vchi_connection, -+ .rx_fifo_size = 0, -+ .tx_fifo_size = 0, -+ .callback = service_callback, -+ .callback_param = NULL, -+ .want_unaligned_bulk_rx = 1, -+ .want_unaligned_bulk_tx = 1, -+ .want_crc = 0 -+ }; -+ -+ /* compile time checks to ensure structure size as they are -+ * directly (de)serialised from memory. -+ */ -+ -+ /* ensure the header structure has packed to the correct size */ -+ BUILD_BUG_ON(sizeof(struct mmal_msg_header) != 24); -+ -+ /* ensure message structure does not exceed maximum length */ -+ BUILD_BUG_ON(sizeof(struct mmal_msg) > MMAL_MSG_MAX_SIZE); -+ -+ /* mmal port struct is correct size */ -+ BUILD_BUG_ON(sizeof(struct mmal_port) != 64); -+ -+ /* create a vchi instance */ -+ status = vchi_initialise(&vchi_instance); -+ if (status) { -+ pr_err("Failed to initialise VCHI instance (status=%d)\n", -+ status); -+ return -EIO; -+ } -+ -+ status = vchi_connect(NULL, 0, vchi_instance); -+ if (status) { -+ pr_err("Failed to connect VCHI instance (status=%d)\n", status); -+ return -EIO; -+ } -+ -+ instance = kzalloc(sizeof(*instance), GFP_KERNEL); -+ -+ if (!instance) -+ return -ENOMEM; -+ -+ mutex_init(&instance->vchiq_mutex); -+ -+ instance->bulk_scratch = vmalloc(PAGE_SIZE); -+ -+ mutex_init(&instance->context_map_lock); -+ idr_init_base(&instance->context_map, 1); -+ -+ params.callback_param = instance; -+ -+ instance->bulk_wq = alloc_ordered_workqueue("mmal-vchiq", -+ WQ_MEM_RECLAIM); -+ if (!instance->bulk_wq) -+ goto err_free; -+ -+ status = vchi_service_open(vchi_instance, ¶ms, &instance->handle); -+ if (status) { -+ pr_err("Failed to open VCHI service connection (status=%d)\n", -+ status); -+ goto err_close_services; -+ } -+ -+ vchi_service_release(instance->handle); -+ -+ *out_instance = instance; -+ -+ return 0; -+ -+err_close_services: -+ vchi_service_close(instance->handle); -+ destroy_workqueue(instance->bulk_wq); -+err_free: -+ vfree(instance->bulk_scratch); -+ kfree(instance); -+ return -ENODEV; -+} -+EXPORT_SYMBOL_GPL(vchiq_mmal_init); ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-common.h -+++ /dev/null -@@ -1,61 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --/* -- * Broadcom BM2835 V4L2 driver -- * -- * Copyright © 2013 Raspberry Pi (Trading) Ltd. -- * -- * Authors: Vincent Sanders @ Collabora -- * Dave Stevenson @ Broadcom -- * (now dave.stevenson@raspberrypi.org) -- * Simon Mellor @ Broadcom -- * Luke Diamand @ Broadcom -- * -- * MMAL structures -- * -- */ --#ifndef MMAL_COMMON_H --#define MMAL_COMMON_H -- --#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) --#define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l') -- --/** Special value signalling that time is not known */ --#define MMAL_TIME_UNKNOWN BIT_ULL(63) -- --struct mmal_msg_context; -- --/* mapping between v4l and mmal video modes */ --struct mmal_fmt { -- char *name; -- u32 fourcc; /* v4l2 format id */ -- int flags; /* v4l2 flags field */ -- u32 mmal; -- int depth; -- u32 mmal_component; /* MMAL component index to be used to encode */ -- u32 ybbp; /* depth of first Y plane for planar formats */ -- bool remove_padding; /* Does the GPU have to remove padding, -- * or can we do hide padding via bytesperline. -- */ --}; -- --/* buffer for one video frame */ --struct mmal_buffer { -- /* v4l buffer data -- must be first */ -- struct vb2_v4l2_buffer vb; -- -- /* list of buffers available */ -- struct list_head list; -- -- void *buffer; /* buffer pointer */ -- unsigned long buffer_size; /* size of allocated buffer */ -- -- struct mmal_msg_context *msg_context; --}; -- --/* */ --struct mmal_colourfx { -- s32 enable; -- u32 u; -- u32 v; --}; --#endif ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-encodings.h -+++ /dev/null -@@ -1,124 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --/* -- * Broadcom BM2835 V4L2 driver -- * -- * Copyright © 2013 Raspberry Pi (Trading) Ltd. -- * -- * Authors: Vincent Sanders @ Collabora -- * Dave Stevenson @ Broadcom -- * (now dave.stevenson@raspberrypi.org) -- * Simon Mellor @ Broadcom -- * Luke Diamand @ Broadcom -- */ --#ifndef MMAL_ENCODINGS_H --#define MMAL_ENCODINGS_H -- --#define MMAL_ENCODING_H264 MMAL_FOURCC('H', '2', '6', '4') --#define MMAL_ENCODING_H263 MMAL_FOURCC('H', '2', '6', '3') --#define MMAL_ENCODING_MP4V MMAL_FOURCC('M', 'P', '4', 'V') --#define MMAL_ENCODING_MP2V MMAL_FOURCC('M', 'P', '2', 'V') --#define MMAL_ENCODING_MP1V MMAL_FOURCC('M', 'P', '1', 'V') --#define MMAL_ENCODING_WMV3 MMAL_FOURCC('W', 'M', 'V', '3') --#define MMAL_ENCODING_WMV2 MMAL_FOURCC('W', 'M', 'V', '2') --#define MMAL_ENCODING_WMV1 MMAL_FOURCC('W', 'M', 'V', '1') --#define MMAL_ENCODING_WVC1 MMAL_FOURCC('W', 'V', 'C', '1') --#define MMAL_ENCODING_VP8 MMAL_FOURCC('V', 'P', '8', ' ') --#define MMAL_ENCODING_VP7 MMAL_FOURCC('V', 'P', '7', ' ') --#define MMAL_ENCODING_VP6 MMAL_FOURCC('V', 'P', '6', ' ') --#define MMAL_ENCODING_THEORA MMAL_FOURCC('T', 'H', 'E', 'O') --#define MMAL_ENCODING_SPARK MMAL_FOURCC('S', 'P', 'R', 'K') --#define MMAL_ENCODING_MJPEG MMAL_FOURCC('M', 'J', 'P', 'G') -- --#define MMAL_ENCODING_JPEG MMAL_FOURCC('J', 'P', 'E', 'G') --#define MMAL_ENCODING_GIF MMAL_FOURCC('G', 'I', 'F', ' ') --#define MMAL_ENCODING_PNG MMAL_FOURCC('P', 'N', 'G', ' ') --#define MMAL_ENCODING_PPM MMAL_FOURCC('P', 'P', 'M', ' ') --#define MMAL_ENCODING_TGA MMAL_FOURCC('T', 'G', 'A', ' ') --#define MMAL_ENCODING_BMP MMAL_FOURCC('B', 'M', 'P', ' ') -- --#define MMAL_ENCODING_I420 MMAL_FOURCC('I', '4', '2', '0') --#define MMAL_ENCODING_I420_SLICE MMAL_FOURCC('S', '4', '2', '0') --#define MMAL_ENCODING_YV12 MMAL_FOURCC('Y', 'V', '1', '2') --#define MMAL_ENCODING_I422 MMAL_FOURCC('I', '4', '2', '2') --#define MMAL_ENCODING_I422_SLICE MMAL_FOURCC('S', '4', '2', '2') --#define MMAL_ENCODING_YUYV MMAL_FOURCC('Y', 'U', 'Y', 'V') --#define MMAL_ENCODING_YVYU MMAL_FOURCC('Y', 'V', 'Y', 'U') --#define MMAL_ENCODING_UYVY MMAL_FOURCC('U', 'Y', 'V', 'Y') --#define MMAL_ENCODING_VYUY MMAL_FOURCC('V', 'Y', 'U', 'Y') --#define MMAL_ENCODING_NV12 MMAL_FOURCC('N', 'V', '1', '2') --#define MMAL_ENCODING_NV21 MMAL_FOURCC('N', 'V', '2', '1') --#define MMAL_ENCODING_ARGB MMAL_FOURCC('A', 'R', 'G', 'B') --#define MMAL_ENCODING_RGBA MMAL_FOURCC('R', 'G', 'B', 'A') --#define MMAL_ENCODING_ABGR MMAL_FOURCC('A', 'B', 'G', 'R') --#define MMAL_ENCODING_BGRA MMAL_FOURCC('B', 'G', 'R', 'A') --#define MMAL_ENCODING_RGB16 MMAL_FOURCC('R', 'G', 'B', '2') --#define MMAL_ENCODING_RGB24 MMAL_FOURCC('R', 'G', 'B', '3') --#define MMAL_ENCODING_RGB32 MMAL_FOURCC('R', 'G', 'B', '4') --#define MMAL_ENCODING_BGR16 MMAL_FOURCC('B', 'G', 'R', '2') --#define MMAL_ENCODING_BGR24 MMAL_FOURCC('B', 'G', 'R', '3') --#define MMAL_ENCODING_BGR32 MMAL_FOURCC('B', 'G', 'R', '4') -- --/** SAND Video (YUVUV128) format, native format understood by VideoCore. -- * This format is *not* opaque - if requested you will receive full frames -- * of YUV_UV video. -- */ --#define MMAL_ENCODING_YUVUV128 MMAL_FOURCC('S', 'A', 'N', 'D') -- --/** VideoCore opaque image format, image handles are returned to -- * the host but not the actual image data. -- */ --#define MMAL_ENCODING_OPAQUE MMAL_FOURCC('O', 'P', 'Q', 'V') -- --/** An EGL image handle -- */ --#define MMAL_ENCODING_EGL_IMAGE MMAL_FOURCC('E', 'G', 'L', 'I') -- --/* }@ */ -- --/** \name Pre-defined audio encodings */ --/* @{ */ --#define MMAL_ENCODING_PCM_UNSIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'U') --#define MMAL_ENCODING_PCM_UNSIGNED_LE MMAL_FOURCC('p', 'c', 'm', 'u') --#define MMAL_ENCODING_PCM_SIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'S') --#define MMAL_ENCODING_PCM_SIGNED_LE MMAL_FOURCC('p', 'c', 'm', 's') --#define MMAL_ENCODING_PCM_FLOAT_BE MMAL_FOURCC('P', 'C', 'M', 'F') --#define MMAL_ENCODING_PCM_FLOAT_LE MMAL_FOURCC('p', 'c', 'm', 'f') -- --/* Pre-defined H264 encoding variants */ -- --/** ISO 14496-10 Annex B byte stream format */ --#define MMAL_ENCODING_VARIANT_H264_DEFAULT 0 --/** ISO 14496-15 AVC stream format */ --#define MMAL_ENCODING_VARIANT_H264_AVC1 MMAL_FOURCC('A', 'V', 'C', '1') --/** Implicitly delineated NAL units without emulation prevention */ --#define MMAL_ENCODING_VARIANT_H264_RAW MMAL_FOURCC('R', 'A', 'W', ' ') -- --/** \defgroup MmalColorSpace List of pre-defined video color spaces -- * This defines a list of common color spaces. This list isn't exhaustive and -- * is only provided as a convenience to avoid clients having to use FourCC -- * codes directly. However components are allowed to define and use their own -- * FourCC codes. -- */ --/* @{ */ -- --/** Unknown color space */ --#define MMAL_COLOR_SPACE_UNKNOWN 0 --/** ITU-R BT.601-5 [SDTV] */ --#define MMAL_COLOR_SPACE_ITUR_BT601 MMAL_FOURCC('Y', '6', '0', '1') --/** ITU-R BT.709-3 [HDTV] */ --#define MMAL_COLOR_SPACE_ITUR_BT709 MMAL_FOURCC('Y', '7', '0', '9') --/** JPEG JFIF */ --#define MMAL_COLOR_SPACE_JPEG_JFIF MMAL_FOURCC('Y', 'J', 'F', 'I') --/** Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ --#define MMAL_COLOR_SPACE_FCC MMAL_FOURCC('Y', 'F', 'C', 'C') --/** Society of Motion Picture and Television Engineers 240M (1999) */ --#define MMAL_COLOR_SPACE_SMPTE240M MMAL_FOURCC('Y', '2', '4', '0') --/** ITU-R BT.470-2 System M */ --#define MMAL_COLOR_SPACE_BT470_2_M MMAL_FOURCC('Y', '_', '_', 'M') --/** ITU-R BT.470-2 System BG */ --#define MMAL_COLOR_SPACE_BT470_2_BG MMAL_FOURCC('Y', '_', 'B', 'G') --/** JPEG JFIF, but with 16..255 luma */ --#define MMAL_COLOR_SPACE_JFIF_Y16_255 MMAL_FOURCC('Y', 'Y', '1', '6') --/* @} MmalColorSpace List */ -- --#endif /* MMAL_ENCODINGS_H */ ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-common.h -+++ /dev/null -@@ -1,48 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --/* -- * Broadcom BM2835 V4L2 driver -- * -- * Copyright © 2013 Raspberry Pi (Trading) Ltd. -- * -- * Authors: Vincent Sanders @ Collabora -- * Dave Stevenson @ Broadcom -- * (now dave.stevenson@raspberrypi.org) -- * Simon Mellor @ Broadcom -- * Luke Diamand @ Broadcom -- */ -- --#ifndef MMAL_MSG_COMMON_H --#define MMAL_MSG_COMMON_H -- --enum mmal_msg_status { -- MMAL_MSG_STATUS_SUCCESS = 0, /**< Success */ -- MMAL_MSG_STATUS_ENOMEM, /**< Out of memory */ -- MMAL_MSG_STATUS_ENOSPC, /**< Out of resources other than memory */ -- MMAL_MSG_STATUS_EINVAL, /**< Argument is invalid */ -- MMAL_MSG_STATUS_ENOSYS, /**< Function not implemented */ -- MMAL_MSG_STATUS_ENOENT, /**< No such file or directory */ -- MMAL_MSG_STATUS_ENXIO, /**< No such device or address */ -- MMAL_MSG_STATUS_EIO, /**< I/O error */ -- MMAL_MSG_STATUS_ESPIPE, /**< Illegal seek */ -- MMAL_MSG_STATUS_ECORRUPT, /**< Data is corrupt \attention */ -- MMAL_MSG_STATUS_ENOTREADY, /**< Component is not ready */ -- MMAL_MSG_STATUS_ECONFIG, /**< Component is not configured */ -- MMAL_MSG_STATUS_EISCONN, /**< Port is already connected */ -- MMAL_MSG_STATUS_ENOTCONN, /**< Port is disconnected */ -- MMAL_MSG_STATUS_EAGAIN, /**< Resource temporarily unavailable. */ -- MMAL_MSG_STATUS_EFAULT, /**< Bad address */ --}; -- --struct mmal_rect { -- s32 x; /**< x coordinate (from left) */ -- s32 y; /**< y coordinate (from top) */ -- s32 width; /**< width */ -- s32 height; /**< height */ --}; -- --struct mmal_rational { -- s32 num; /**< Numerator */ -- s32 den; /**< Denominator */ --}; -- --#endif /* MMAL_MSG_COMMON_H */ ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-format.h -+++ /dev/null -@@ -1,106 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --/* -- * Broadcom BM2835 V4L2 driver -- * -- * Copyright © 2013 Raspberry Pi (Trading) Ltd. -- * -- * Authors: Vincent Sanders @ Collabora -- * Dave Stevenson @ Broadcom -- * (now dave.stevenson@raspberrypi.org) -- * Simon Mellor @ Broadcom -- * Luke Diamand @ Broadcom -- */ -- --#ifndef MMAL_MSG_FORMAT_H --#define MMAL_MSG_FORMAT_H -- --#include "mmal-msg-common.h" -- --/* MMAL_ES_FORMAT_T */ -- --struct mmal_audio_format { -- u32 channels; /* Number of audio channels */ -- u32 sample_rate; /* Sample rate */ -- -- u32 bits_per_sample; /* Bits per sample */ -- u32 block_align; /* Size of a block of data */ --}; -- --struct mmal_video_format { -- u32 width; /* Width of frame in pixels */ -- u32 height; /* Height of frame in rows of pixels */ -- struct mmal_rect crop; /* Visible region of the frame */ -- struct mmal_rational frame_rate; /* Frame rate */ -- struct mmal_rational par; /* Pixel aspect ratio */ -- -- /* -- * FourCC specifying the color space of the video stream. See the -- * MmalColorSpace "pre-defined color spaces" for some examples. -- */ -- u32 color_space; --}; -- --struct mmal_subpicture_format { -- u32 x_offset; -- u32 y_offset; --}; -- --union mmal_es_specific_format { -- struct mmal_audio_format audio; -- struct mmal_video_format video; -- struct mmal_subpicture_format subpicture; --}; -- --/* Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ --struct mmal_es_format_local { -- u32 type; /* enum mmal_es_type */ -- -- u32 encoding; /* FourCC specifying encoding of the elementary -- * stream. -- */ -- u32 encoding_variant; /* FourCC specifying the specific -- * encoding variant of the elementary -- * stream. -- */ -- -- union mmal_es_specific_format *es; /* Type specific -- * information for the -- * elementary stream -- */ -- -- u32 bitrate; /* Bitrate in bits per second */ -- u32 flags; /* Flags describing properties of the elementary -- * stream. -- */ -- -- u32 extradata_size; /* Size of the codec specific data */ -- u8 *extradata; /* Codec specific data */ --}; -- --/* Remote definition of an elementary stream format (MMAL_ES_FORMAT_T) */ --struct mmal_es_format { -- u32 type; /* enum mmal_es_type */ -- -- u32 encoding; /* FourCC specifying encoding of the elementary -- * stream. -- */ -- u32 encoding_variant; /* FourCC specifying the specific -- * encoding variant of the elementary -- * stream. -- */ -- -- u32 es; /* Type specific -- * information for the -- * elementary stream -- */ -- -- u32 bitrate; /* Bitrate in bits per second */ -- u32 flags; /* Flags describing properties of the elementary -- * stream. -- */ -- -- u32 extradata_size; /* Size of the codec specific data */ -- u32 extradata; /* Codec specific data */ --}; -- --#endif /* MMAL_MSG_FORMAT_H */ ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg-port.h -+++ /dev/null -@@ -1,109 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --/* -- * Broadcom BM2835 V4L2 driver -- * -- * Copyright © 2013 Raspberry Pi (Trading) Ltd. -- * -- * Authors: Vincent Sanders @ Collabora -- * Dave Stevenson @ Broadcom -- * (now dave.stevenson@raspberrypi.org) -- * Simon Mellor @ Broadcom -- * Luke Diamand @ Broadcom -- */ -- --/* MMAL_PORT_TYPE_T */ --enum mmal_port_type { -- MMAL_PORT_TYPE_UNKNOWN = 0, /* Unknown port type */ -- MMAL_PORT_TYPE_CONTROL, /* Control port */ -- MMAL_PORT_TYPE_INPUT, /* Input port */ -- MMAL_PORT_TYPE_OUTPUT, /* Output port */ -- MMAL_PORT_TYPE_CLOCK, /* Clock port */ --}; -- --/* The port is pass-through and doesn't need buffer headers allocated */ --#define MMAL_PORT_CAPABILITY_PASSTHROUGH 0x01 --/* -- *The port wants to allocate the buffer payloads. -- * This signals a preference that payload allocation should be done -- * on this port for efficiency reasons. -- */ --#define MMAL_PORT_CAPABILITY_ALLOCATION 0x02 --/* -- * The port supports format change events. -- * This applies to input ports and is used to let the client know -- * whether the port supports being reconfigured via a format -- * change event (i.e. without having to disable the port). -- */ --#define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE 0x04 -- --/* -- * mmal port structure (MMAL_PORT_T) -- * -- * most elements are informational only, the pointer values for -- * interogation messages are generally provided as additional -- * structures within the message. When used to set values only the -- * buffer_num, buffer_size and userdata parameters are writable. -- */ --struct mmal_port { -- u32 priv; /* Private member used by the framework */ -- u32 name; /* Port name. Used for debugging purposes (RO) */ -- -- u32 type; /* Type of the port (RO) enum mmal_port_type */ -- u16 index; /* Index of the port in its type list (RO) */ -- u16 index_all; /* Index of the port in the list of all ports (RO) */ -- -- u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ -- u32 format; /* Format of the elementary stream */ -- -- u32 buffer_num_min; /* Minimum number of buffers the port -- * requires (RO). This is set by the -- * component. -- */ -- -- u32 buffer_size_min; /* Minimum size of buffers the port -- * requires (RO). This is set by the -- * component. -- */ -- -- u32 buffer_alignment_min;/* Minimum alignment requirement for -- * the buffers (RO). A value of -- * zero means no special alignment -- * requirements. This is set by the -- * component. -- */ -- -- u32 buffer_num_recommended; /* Number of buffers the port -- * recommends for optimal -- * performance (RO). A value of -- * zero means no special -- * recommendation. This is set -- * by the component. -- */ -- -- u32 buffer_size_recommended; /* Size of buffers the port -- * recommends for optimal -- * performance (RO). A value of -- * zero means no special -- * recommendation. This is set -- * by the component. -- */ -- -- u32 buffer_num; /* Actual number of buffers the port will use. -- * This is set by the client. -- */ -- -- u32 buffer_size; /* Actual maximum size of the buffers that -- * will be sent to the port. This is set by -- * the client. -- */ -- -- u32 component; /* Component this port belongs to (Read Only) */ -- -- u32 userdata; /* Field reserved for use by the client */ -- -- u32 capabilities; /* Flags describing the capabilities of a -- * port (RO). Bitwise combination of \ref -- * portcapabilities "Port capabilities" -- * values. -- */ --}; ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-msg.h -+++ /dev/null -@@ -1,406 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --/* -- * Broadcom BM2835 V4L2 driver -- * -- * Copyright © 2013 Raspberry Pi (Trading) Ltd. -- * -- * Authors: Vincent Sanders @ Collabora -- * Dave Stevenson @ Broadcom -- * (now dave.stevenson@raspberrypi.org) -- * Simon Mellor @ Broadcom -- * Luke Diamand @ Broadcom -- */ -- --/* -- * all the data structures which serialise the MMAL protocol. note -- * these are directly mapped onto the recived message data. -- * -- * BEWARE: They seem to *assume* pointers are u32 and that there is no -- * structure padding! -- * -- * NOTE: this implementation uses kernel types to ensure sizes. Rather -- * than assigning values to enums to force their size the -- * implementation uses fixed size types and not the enums (though the -- * comments have the actual enum type -- */ --#ifndef MMAL_MSG_H --#define MMAL_MSG_H -- --#define VC_MMAL_VER 15 --#define VC_MMAL_MIN_VER 10 --#define VC_MMAL_SERVER_NAME MAKE_FOURCC("mmal") -- --/* max total message size is 512 bytes */ --#define MMAL_MSG_MAX_SIZE 512 --/* with six 32bit header elements max payload is therefore 488 bytes */ --#define MMAL_MSG_MAX_PAYLOAD 488 -- --#include "mmal-msg-common.h" --#include "mmal-msg-format.h" --#include "mmal-msg-port.h" -- --enum mmal_msg_type { -- MMAL_MSG_TYPE_QUIT = 1, -- MMAL_MSG_TYPE_SERVICE_CLOSED, -- MMAL_MSG_TYPE_GET_VERSION, -- MMAL_MSG_TYPE_COMPONENT_CREATE, -- MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ -- MMAL_MSG_TYPE_COMPONENT_ENABLE, -- MMAL_MSG_TYPE_COMPONENT_DISABLE, -- MMAL_MSG_TYPE_PORT_INFO_GET, -- MMAL_MSG_TYPE_PORT_INFO_SET, -- MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ -- MMAL_MSG_TYPE_BUFFER_FROM_HOST, -- MMAL_MSG_TYPE_BUFFER_TO_HOST, -- MMAL_MSG_TYPE_GET_STATS, -- MMAL_MSG_TYPE_PORT_PARAMETER_SET, -- MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ -- MMAL_MSG_TYPE_EVENT_TO_HOST, -- MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT, -- MMAL_MSG_TYPE_OPAQUE_ALLOCATOR, -- MMAL_MSG_TYPE_CONSUME_MEM, -- MMAL_MSG_TYPE_LMK, /* 20 */ -- MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC, -- MMAL_MSG_TYPE_DRM_GET_LHS32, -- MMAL_MSG_TYPE_DRM_GET_TIME, -- MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN, -- MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ -- MMAL_MSG_TYPE_HOST_LOG, -- MMAL_MSG_TYPE_MSG_LAST --}; -- --/* port action request messages differ depending on the action type */ --enum mmal_msg_port_action_type { -- MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unknown action */ -- MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ -- MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ -- MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ -- MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ -- MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ -- MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/ --}; -- --struct mmal_msg_header { -- u32 magic; -- u32 type; /* enum mmal_msg_type */ -- -- /* Opaque handle to the control service */ -- u32 control_service; -- -- u32 context; /* a u32 per message context */ -- u32 status; /* The status of the vchiq operation */ -- u32 padding; --}; -- --/* Send from VC to host to report version */ --struct mmal_msg_version { -- u32 flags; -- u32 major; -- u32 minor; -- u32 minimum; --}; -- --/* request to VC to create component */ --struct mmal_msg_component_create { -- u32 client_component; /* component context */ -- char name[128]; -- u32 pid; /* For debug */ --}; -- --/* reply from VC to component creation request */ --struct mmal_msg_component_create_reply { -- u32 status; /* enum mmal_msg_status - how does this differ to -- * the one in the header? -- */ -- u32 component_handle; /* VideoCore handle for component */ -- u32 input_num; /* Number of input ports */ -- u32 output_num; /* Number of output ports */ -- u32 clock_num; /* Number of clock ports */ --}; -- --/* request to VC to destroy a component */ --struct mmal_msg_component_destroy { -- u32 component_handle; --}; -- --struct mmal_msg_component_destroy_reply { -- u32 status; /* The component destruction status */ --}; -- --/* request and reply to VC to enable a component */ --struct mmal_msg_component_enable { -- u32 component_handle; --}; -- --struct mmal_msg_component_enable_reply { -- u32 status; /* The component enable status */ --}; -- --/* request and reply to VC to disable a component */ --struct mmal_msg_component_disable { -- u32 component_handle; --}; -- --struct mmal_msg_component_disable_reply { -- u32 status; /* The component disable status */ --}; -- --/* request to VC to get port information */ --struct mmal_msg_port_info_get { -- u32 component_handle; /* component handle port is associated with */ -- u32 port_type; /* enum mmal_msg_port_type */ -- u32 index; /* port index to query */ --}; -- --/* reply from VC to get port info request */ --struct mmal_msg_port_info_get_reply { -- u32 status; /* enum mmal_msg_status */ -- u32 component_handle; /* component handle port is associated with */ -- u32 port_type; /* enum mmal_msg_port_type */ -- u32 port_index; /* port indexed in query */ -- s32 found; /* unused */ -- u32 port_handle; /* Handle to use for this port */ -- struct mmal_port port; -- struct mmal_es_format format; /* elementary stream format */ -- union mmal_es_specific_format es; /* es type specific data */ -- u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; /* es extra data */ --}; -- --/* request to VC to set port information */ --struct mmal_msg_port_info_set { -- u32 component_handle; -- u32 port_type; /* enum mmal_msg_port_type */ -- u32 port_index; /* port indexed in query */ -- struct mmal_port port; -- struct mmal_es_format format; -- union mmal_es_specific_format es; -- u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; --}; -- --/* reply from VC to port info set request */ --struct mmal_msg_port_info_set_reply { -- u32 status; -- u32 component_handle; /* component handle port is associated with */ -- u32 port_type; /* enum mmal_msg_port_type */ -- u32 index; /* port indexed in query */ -- s32 found; /* unused */ -- u32 port_handle; /* Handle to use for this port */ -- struct mmal_port port; -- struct mmal_es_format format; -- union mmal_es_specific_format es; -- u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; --}; -- --/* port action requests that take a mmal_port as a parameter */ --struct mmal_msg_port_action_port { -- u32 component_handle; -- u32 port_handle; -- u32 action; /* enum mmal_msg_port_action_type */ -- struct mmal_port port; --}; -- --/* port action requests that take handles as a parameter */ --struct mmal_msg_port_action_handle { -- u32 component_handle; -- u32 port_handle; -- u32 action; /* enum mmal_msg_port_action_type */ -- u32 connect_component_handle; -- u32 connect_port_handle; --}; -- --struct mmal_msg_port_action_reply { -- u32 status; /* The port action operation status */ --}; -- --/* MMAL buffer transfer */ -- --/* Size of space reserved in a buffer message for short messages. */ --#define MMAL_VC_SHORT_DATA 128 -- --/* Signals that the current payload is the end of the stream of data */ --#define MMAL_BUFFER_HEADER_FLAG_EOS BIT(0) --/* Signals that the start of the current payload starts a frame */ --#define MMAL_BUFFER_HEADER_FLAG_FRAME_START BIT(1) --/* Signals that the end of the current payload ends a frame */ --#define MMAL_BUFFER_HEADER_FLAG_FRAME_END BIT(2) --/* Signals that the current payload contains only complete frames (>1) */ --#define MMAL_BUFFER_HEADER_FLAG_FRAME \ -- (MMAL_BUFFER_HEADER_FLAG_FRAME_START | \ -- MMAL_BUFFER_HEADER_FLAG_FRAME_END) --/* Signals that the current payload is a keyframe (i.e. self decodable) */ --#define MMAL_BUFFER_HEADER_FLAG_KEYFRAME BIT(3) --/* -- * Signals a discontinuity in the stream of data (e.g. after a seek). -- * Can be used for instance by a decoder to reset its state -- */ --#define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY BIT(4) --/* -- * Signals a buffer containing some kind of config data for the component -- * (e.g. codec config data) -- */ --#define MMAL_BUFFER_HEADER_FLAG_CONFIG BIT(5) --/* Signals an encrypted payload */ --#define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED BIT(6) --/* Signals a buffer containing side information */ --#define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO BIT(7) --/* -- * Signals a buffer which is the snapshot/postview image from a stills -- * capture -- */ --#define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT BIT(8) --/* Signals a buffer which contains data known to be corrupted */ --#define MMAL_BUFFER_HEADER_FLAG_CORRUPTED BIT(9) --/* Signals that a buffer failed to be transmitted */ --#define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED BIT(10) -- --struct mmal_driver_buffer { -- u32 magic; -- u32 component_handle; -- u32 port_handle; -- u32 client_context; --}; -- --/* buffer header */ --struct mmal_buffer_header { -- u32 next; /* next header */ -- u32 priv; /* framework private data */ -- u32 cmd; -- u32 data; -- u32 alloc_size; -- u32 length; -- u32 offset; -- u32 flags; -- s64 pts; -- s64 dts; -- u32 type; -- u32 user_data; --}; -- --struct mmal_buffer_header_type_specific { -- union { -- struct { -- u32 planes; -- u32 offset[4]; -- u32 pitch[4]; -- u32 flags; -- } video; -- } u; --}; -- --struct mmal_msg_buffer_from_host { -- /* -- *The front 32 bytes of the buffer header are copied -- * back to us in the reply to allow for context. This -- * area is used to store two mmal_driver_buffer structures to -- * allow for multiple concurrent service users. -- */ -- /* control data */ -- struct mmal_driver_buffer drvbuf; -- -- /* referenced control data for passthrough buffer management */ -- struct mmal_driver_buffer drvbuf_ref; -- struct mmal_buffer_header buffer_header; /* buffer header itself */ -- struct mmal_buffer_header_type_specific buffer_header_type_specific; -- s32 is_zero_copy; -- s32 has_reference; -- -- /* allows short data to be xfered in control message */ -- u32 payload_in_message; -- u8 short_data[MMAL_VC_SHORT_DATA]; --}; -- --/* port parameter setting */ -- --#define MMAL_WORKER_PORT_PARAMETER_SPACE 96 -- --struct mmal_msg_port_parameter_set { -- u32 component_handle; /* component */ -- u32 port_handle; /* port */ -- u32 id; /* Parameter ID */ -- u32 size; /* Parameter size */ -- uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; --}; -- --struct mmal_msg_port_parameter_set_reply { -- u32 status; /* enum mmal_msg_status todo: how does this -- * differ to the one in the header? -- */ --}; -- --/* port parameter getting */ -- --struct mmal_msg_port_parameter_get { -- u32 component_handle; /* component */ -- u32 port_handle; /* port */ -- u32 id; /* Parameter ID */ -- u32 size; /* Parameter size */ --}; -- --struct mmal_msg_port_parameter_get_reply { -- u32 status; /* Status of mmal_port_parameter_get call */ -- u32 id; /* Parameter ID */ -- u32 size; /* Parameter size */ -- uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; --}; -- --/* event messages */ --#define MMAL_WORKER_EVENT_SPACE 256 -- --struct mmal_msg_event_to_host { -- u32 client_component; /* component context */ -- -- u32 port_type; -- u32 port_num; -- -- u32 cmd; -- u32 length; -- u8 data[MMAL_WORKER_EVENT_SPACE]; -- u32 delayed_buffer; --}; -- --/* all mmal messages are serialised through this structure */ --struct mmal_msg { -- /* header */ -- struct mmal_msg_header h; -- /* payload */ -- union { -- struct mmal_msg_version version; -- -- struct mmal_msg_component_create component_create; -- struct mmal_msg_component_create_reply component_create_reply; -- -- struct mmal_msg_component_destroy component_destroy; -- struct mmal_msg_component_destroy_reply component_destroy_reply; -- -- struct mmal_msg_component_enable component_enable; -- struct mmal_msg_component_enable_reply component_enable_reply; -- -- struct mmal_msg_component_disable component_disable; -- struct mmal_msg_component_disable_reply component_disable_reply; -- -- struct mmal_msg_port_info_get port_info_get; -- struct mmal_msg_port_info_get_reply port_info_get_reply; -- -- struct mmal_msg_port_info_set port_info_set; -- struct mmal_msg_port_info_set_reply port_info_set_reply; -- -- struct mmal_msg_port_action_port port_action_port; -- struct mmal_msg_port_action_handle port_action_handle; -- struct mmal_msg_port_action_reply port_action_reply; -- -- struct mmal_msg_buffer_from_host buffer_from_host; -- -- struct mmal_msg_port_parameter_set port_parameter_set; -- struct mmal_msg_port_parameter_set_reply -- port_parameter_set_reply; -- struct mmal_msg_port_parameter_get -- port_parameter_get; -- struct mmal_msg_port_parameter_get_reply -- port_parameter_get_reply; -- -- struct mmal_msg_event_to_host event_to_host; -- -- u8 payload[MMAL_MSG_MAX_PAYLOAD]; -- } u; --}; --#endif ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-parameters.h -+++ /dev/null -@@ -1,755 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --/* -- * Broadcom BM2835 V4L2 driver -- * -- * Copyright © 2013 Raspberry Pi (Trading) Ltd. -- * -- * Authors: Vincent Sanders @ Collabora -- * Dave Stevenson @ Broadcom -- * (now dave.stevenson@raspberrypi.org) -- * Simon Mellor @ Broadcom -- * Luke Diamand @ Broadcom -- */ -- --/* common parameters */ -- --/** @name Parameter groups -- * Parameters are divided into groups, and then allocated sequentially within -- * a group using an enum. -- * @{ -- */ -- --#ifndef MMAL_PARAMETERS_H --#define MMAL_PARAMETERS_H -- --/** Common parameter ID group, used with many types of component. */ --#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) --/** Camera-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) --/** Video-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) --/** Audio-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) --/** Clock-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) --/** Miracast-specific parameter ID group. */ --#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) -- --/* Common parameters */ --enum mmal_parameter_common_type { -- /**< Never a valid parameter ID */ -- MMAL_PARAMETER_UNUSED = MMAL_PARAMETER_GROUP_COMMON, -- -- /**< MMAL_PARAMETER_ENCODING_T */ -- MMAL_PARAMETER_SUPPORTED_ENCODINGS, -- /**< MMAL_PARAMETER_URI_T */ -- MMAL_PARAMETER_URI, -- /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ -- MMAL_PARAMETER_CHANGE_EVENT_REQUEST, -- /** MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_ZERO_COPY, -- /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ -- MMAL_PARAMETER_BUFFER_REQUIREMENTS, -- /**< MMAL_PARAMETER_STATISTICS_T */ -- MMAL_PARAMETER_STATISTICS, -- /**< MMAL_PARAMETER_CORE_STATISTICS_T */ -- MMAL_PARAMETER_CORE_STATISTICS, -- /**< MMAL_PARAMETER_MEM_USAGE_T */ -- MMAL_PARAMETER_MEM_USAGE, -- /**< MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_BUFFER_FLAG_FILTER, -- /**< MMAL_PARAMETER_SEEK_T */ -- MMAL_PARAMETER_SEEK, -- /**< MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_POWERMON_ENABLE, -- /**< MMAL_PARAMETER_LOGGING_T */ -- MMAL_PARAMETER_LOGGING, -- /**< MMAL_PARAMETER_UINT64_T */ -- MMAL_PARAMETER_SYSTEM_TIME, -- /**< MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_NO_IMAGE_PADDING, --}; -- --/* camera parameters */ -- --enum mmal_parameter_camera_type { -- /* 0 */ -- /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ -- MMAL_PARAMETER_THUMBNAIL_CONFIGURATION = -- MMAL_PARAMETER_GROUP_CAMERA, -- /**< Unused? */ -- MMAL_PARAMETER_CAPTURE_QUALITY, -- /**< @ref MMAL_PARAMETER_INT32_T */ -- MMAL_PARAMETER_ROTATION, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_EXIF_DISABLE, -- /**< @ref MMAL_PARAMETER_EXIF_T */ -- MMAL_PARAMETER_EXIF, -- /**< @ref MMAL_PARAM_AWBMODE_T */ -- MMAL_PARAMETER_AWB_MODE, -- /**< @ref MMAL_PARAMETER_IMAGEFX_T */ -- MMAL_PARAMETER_IMAGE_EFFECT, -- /**< @ref MMAL_PARAMETER_COLOURFX_T */ -- MMAL_PARAMETER_COLOUR_EFFECT, -- /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ -- MMAL_PARAMETER_FLICKER_AVOID, -- /**< @ref MMAL_PARAMETER_FLASH_T */ -- MMAL_PARAMETER_FLASH, -- /**< @ref MMAL_PARAMETER_REDEYE_T */ -- MMAL_PARAMETER_REDEYE, -- /**< @ref MMAL_PARAMETER_FOCUS_T */ -- MMAL_PARAMETER_FOCUS, -- /**< Unused? */ -- MMAL_PARAMETER_FOCAL_LENGTHS, -- /**< @ref MMAL_PARAMETER_INT32_T */ -- MMAL_PARAMETER_EXPOSURE_COMP, -- /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ -- MMAL_PARAMETER_ZOOM, -- /**< @ref MMAL_PARAMETER_MIRROR_T */ -- MMAL_PARAMETER_MIRROR, -- -- /* 0x10 */ -- /**< @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_CAMERA_NUM, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_CAPTURE, -- /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ -- MMAL_PARAMETER_EXPOSURE_MODE, -- /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ -- MMAL_PARAMETER_EXP_METERING_MODE, -- /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ -- MMAL_PARAMETER_FOCUS_STATUS, -- /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ -- MMAL_PARAMETER_CAMERA_CONFIG, -- /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ -- MMAL_PARAMETER_CAPTURE_STATUS, -- /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ -- MMAL_PARAMETER_FACE_TRACK, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, -- /**< @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_JPEG_Q_FACTOR, -- /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ -- MMAL_PARAMETER_FRAME_RATE, -- /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ -- MMAL_PARAMETER_USE_STC, -- /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ -- MMAL_PARAMETER_CAMERA_INFO, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_VIDEO_STABILISATION, -- /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ -- MMAL_PARAMETER_FACE_TRACK_RESULTS, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_ENABLE_RAW_CAPTURE, -- -- /* 0x20 */ -- /**< @ref MMAL_PARAMETER_URI_T */ -- MMAL_PARAMETER_DPF_FILE, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_ENABLE_DPF_FILE, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_DPF_FAIL_IS_FATAL, -- /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ -- MMAL_PARAMETER_CAPTURE_MODE, -- /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ -- MMAL_PARAMETER_FOCUS_REGIONS, -- /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ -- MMAL_PARAMETER_INPUT_CROP, -- /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ -- MMAL_PARAMETER_SENSOR_INFORMATION, -- /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ -- MMAL_PARAMETER_FLASH_SELECT, -- /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ -- MMAL_PARAMETER_FIELD_OF_VIEW, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, -- /**< @ref MMAL_PARAMETER_DRC_T */ -- MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, -- /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ -- MMAL_PARAMETER_ALGORITHM_CONTROL, -- /**< @ref MMAL_PARAMETER_RATIONAL_T */ -- MMAL_PARAMETER_SHARPNESS, -- /**< @ref MMAL_PARAMETER_RATIONAL_T */ -- MMAL_PARAMETER_CONTRAST, -- /**< @ref MMAL_PARAMETER_RATIONAL_T */ -- MMAL_PARAMETER_BRIGHTNESS, -- /**< @ref MMAL_PARAMETER_RATIONAL_T */ -- MMAL_PARAMETER_SATURATION, -- -- /* 0x30 */ -- /**< @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_ISO, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_ANTISHAKE, -- /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ -- MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_CAMERA_BURST_CAPTURE, -- /** @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_CAMERA_MIN_ISO, -- /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ -- MMAL_PARAMETER_CAMERA_USE_CASE, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_CAPTURE_STATS_PASS, -- /** @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_ENABLE_REGISTER_FILE, -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL, -- /** @ref MMAL_PARAMETER_CONFIGFILE_T */ -- MMAL_PARAMETER_CONFIGFILE_REGISTERS, -- /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ -- MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_JPEG_ATTACH_LOG, -- /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ -- MMAL_PARAMETER_ZERO_SHUTTER_LAG, -- /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ -- MMAL_PARAMETER_FPS_RANGE, -- /**< @ref MMAL_PARAMETER_INT32_T */ -- MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, -- -- /* 0x40 */ -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_SW_SHARPEN_DISABLE, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_FLASH_REQUIRED, -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_SW_SATURATION_DISABLE, -- /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_SHUTTER_SPEED, -- /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ -- MMAL_PARAMETER_CUSTOM_AWB_GAINS, --}; -- --struct mmal_parameter_rational { -- s32 num; /**< Numerator */ -- s32 den; /**< Denominator */ --}; -- --enum mmal_parameter_camera_config_timestamp_mode { -- MMAL_PARAM_TIMESTAMP_MODE_ZERO = 0, /* Always timestamp frames as 0 */ -- MMAL_PARAM_TIMESTAMP_MODE_RAW_STC, /* Use the raw STC value -- * for the frame timestamp -- */ -- MMAL_PARAM_TIMESTAMP_MODE_RESET_STC, /* Use the STC timestamp -- * but subtract the -- * timestamp of the first -- * frame sent to give a -- * zero based timestamp. -- */ --}; -- --struct mmal_parameter_fps_range { -- /**< Low end of the permitted framerate range */ -- struct mmal_parameter_rational fps_low; -- /**< High end of the permitted framerate range */ -- struct mmal_parameter_rational fps_high; --}; -- --/* camera configuration parameter */ --struct mmal_parameter_camera_config { -- /* Parameters for setting up the image pools */ -- u32 max_stills_w; /* Max size of stills capture */ -- u32 max_stills_h; -- u32 stills_yuv422; /* Allow YUV422 stills capture */ -- u32 one_shot_stills; /* Continuous or one shot stills captures. */ -- -- u32 max_preview_video_w; /* Max size of the preview or video -- * capture frames -- */ -- u32 max_preview_video_h; -- u32 num_preview_video_frames; -- -- /** Sets the height of the circular buffer for stills capture. */ -- u32 stills_capture_circular_buffer_height; -- -- /** Allows preview/encode to resume as fast as possible after the stills -- * input frame has been received, and then processes the still frame in -- * the background whilst preview/encode has resumed. -- * Actual mode is controlled by MMAL_PARAMETER_CAPTURE_MODE. -- */ -- u32 fast_preview_resume; -- -- /** Selects algorithm for timestamping frames if -- * there is no clock component connected. -- * enum mmal_parameter_camera_config_timestamp_mode -- */ -- s32 use_stc_timestamp; --}; -- --enum mmal_parameter_exposuremode { -- MMAL_PARAM_EXPOSUREMODE_OFF, -- MMAL_PARAM_EXPOSUREMODE_AUTO, -- MMAL_PARAM_EXPOSUREMODE_NIGHT, -- MMAL_PARAM_EXPOSUREMODE_NIGHTPREVIEW, -- MMAL_PARAM_EXPOSUREMODE_BACKLIGHT, -- MMAL_PARAM_EXPOSUREMODE_SPOTLIGHT, -- MMAL_PARAM_EXPOSUREMODE_SPORTS, -- MMAL_PARAM_EXPOSUREMODE_SNOW, -- MMAL_PARAM_EXPOSUREMODE_BEACH, -- MMAL_PARAM_EXPOSUREMODE_VERYLONG, -- MMAL_PARAM_EXPOSUREMODE_FIXEDFPS, -- MMAL_PARAM_EXPOSUREMODE_ANTISHAKE, -- MMAL_PARAM_EXPOSUREMODE_FIREWORKS, --}; -- --enum mmal_parameter_exposuremeteringmode { -- MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE, -- MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT, -- MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT, -- MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX, --}; -- --enum mmal_parameter_awbmode { -- MMAL_PARAM_AWBMODE_OFF, -- MMAL_PARAM_AWBMODE_AUTO, -- MMAL_PARAM_AWBMODE_SUNLIGHT, -- MMAL_PARAM_AWBMODE_CLOUDY, -- MMAL_PARAM_AWBMODE_SHADE, -- MMAL_PARAM_AWBMODE_TUNGSTEN, -- MMAL_PARAM_AWBMODE_FLUORESCENT, -- MMAL_PARAM_AWBMODE_INCANDESCENT, -- MMAL_PARAM_AWBMODE_FLASH, -- MMAL_PARAM_AWBMODE_HORIZON, --}; -- --enum mmal_parameter_imagefx { -- MMAL_PARAM_IMAGEFX_NONE, -- MMAL_PARAM_IMAGEFX_NEGATIVE, -- MMAL_PARAM_IMAGEFX_SOLARIZE, -- MMAL_PARAM_IMAGEFX_POSTERIZE, -- MMAL_PARAM_IMAGEFX_WHITEBOARD, -- MMAL_PARAM_IMAGEFX_BLACKBOARD, -- MMAL_PARAM_IMAGEFX_SKETCH, -- MMAL_PARAM_IMAGEFX_DENOISE, -- MMAL_PARAM_IMAGEFX_EMBOSS, -- MMAL_PARAM_IMAGEFX_OILPAINT, -- MMAL_PARAM_IMAGEFX_HATCH, -- MMAL_PARAM_IMAGEFX_GPEN, -- MMAL_PARAM_IMAGEFX_PASTEL, -- MMAL_PARAM_IMAGEFX_WATERCOLOUR, -- MMAL_PARAM_IMAGEFX_FILM, -- MMAL_PARAM_IMAGEFX_BLUR, -- MMAL_PARAM_IMAGEFX_SATURATION, -- MMAL_PARAM_IMAGEFX_COLOURSWAP, -- MMAL_PARAM_IMAGEFX_WASHEDOUT, -- MMAL_PARAM_IMAGEFX_POSTERISE, -- MMAL_PARAM_IMAGEFX_COLOURPOINT, -- MMAL_PARAM_IMAGEFX_COLOURBALANCE, -- MMAL_PARAM_IMAGEFX_CARTOON, --}; -- --enum MMAL_PARAM_FLICKERAVOID_T { -- MMAL_PARAM_FLICKERAVOID_OFF, -- MMAL_PARAM_FLICKERAVOID_AUTO, -- MMAL_PARAM_FLICKERAVOID_50HZ, -- MMAL_PARAM_FLICKERAVOID_60HZ, -- MMAL_PARAM_FLICKERAVOID_MAX = 0x7FFFFFFF --}; -- --struct mmal_parameter_awbgains { -- struct mmal_parameter_rational r_gain; /**< Red gain */ -- struct mmal_parameter_rational b_gain; /**< Blue gain */ --}; -- --/** Manner of video rate control */ --enum mmal_parameter_rate_control_mode { -- MMAL_VIDEO_RATECONTROL_DEFAULT, -- MMAL_VIDEO_RATECONTROL_VARIABLE, -- MMAL_VIDEO_RATECONTROL_CONSTANT, -- MMAL_VIDEO_RATECONTROL_VARIABLE_SKIP_FRAMES, -- MMAL_VIDEO_RATECONTROL_CONSTANT_SKIP_FRAMES --}; -- --enum mmal_video_profile { -- MMAL_VIDEO_PROFILE_H263_BASELINE, -- MMAL_VIDEO_PROFILE_H263_H320CODING, -- MMAL_VIDEO_PROFILE_H263_BACKWARDCOMPATIBLE, -- MMAL_VIDEO_PROFILE_H263_ISWV2, -- MMAL_VIDEO_PROFILE_H263_ISWV3, -- MMAL_VIDEO_PROFILE_H263_HIGHCOMPRESSION, -- MMAL_VIDEO_PROFILE_H263_INTERNET, -- MMAL_VIDEO_PROFILE_H263_INTERLACE, -- MMAL_VIDEO_PROFILE_H263_HIGHLATENCY, -- MMAL_VIDEO_PROFILE_MP4V_SIMPLE, -- MMAL_VIDEO_PROFILE_MP4V_SIMPLESCALABLE, -- MMAL_VIDEO_PROFILE_MP4V_CORE, -- MMAL_VIDEO_PROFILE_MP4V_MAIN, -- MMAL_VIDEO_PROFILE_MP4V_NBIT, -- MMAL_VIDEO_PROFILE_MP4V_SCALABLETEXTURE, -- MMAL_VIDEO_PROFILE_MP4V_SIMPLEFACE, -- MMAL_VIDEO_PROFILE_MP4V_SIMPLEFBA, -- MMAL_VIDEO_PROFILE_MP4V_BASICANIMATED, -- MMAL_VIDEO_PROFILE_MP4V_HYBRID, -- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDREALTIME, -- MMAL_VIDEO_PROFILE_MP4V_CORESCALABLE, -- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCODING, -- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCORE, -- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSCALABLE, -- MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSIMPLE, -- MMAL_VIDEO_PROFILE_H264_BASELINE, -- MMAL_VIDEO_PROFILE_H264_MAIN, -- MMAL_VIDEO_PROFILE_H264_EXTENDED, -- MMAL_VIDEO_PROFILE_H264_HIGH, -- MMAL_VIDEO_PROFILE_H264_HIGH10, -- MMAL_VIDEO_PROFILE_H264_HIGH422, -- MMAL_VIDEO_PROFILE_H264_HIGH444, -- MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE, -- MMAL_VIDEO_PROFILE_DUMMY = 0x7FFFFFFF --}; -- --enum mmal_video_level { -- MMAL_VIDEO_LEVEL_H263_10, -- MMAL_VIDEO_LEVEL_H263_20, -- MMAL_VIDEO_LEVEL_H263_30, -- MMAL_VIDEO_LEVEL_H263_40, -- MMAL_VIDEO_LEVEL_H263_45, -- MMAL_VIDEO_LEVEL_H263_50, -- MMAL_VIDEO_LEVEL_H263_60, -- MMAL_VIDEO_LEVEL_H263_70, -- MMAL_VIDEO_LEVEL_MP4V_0, -- MMAL_VIDEO_LEVEL_MP4V_0b, -- MMAL_VIDEO_LEVEL_MP4V_1, -- MMAL_VIDEO_LEVEL_MP4V_2, -- MMAL_VIDEO_LEVEL_MP4V_3, -- MMAL_VIDEO_LEVEL_MP4V_4, -- MMAL_VIDEO_LEVEL_MP4V_4a, -- MMAL_VIDEO_LEVEL_MP4V_5, -- MMAL_VIDEO_LEVEL_MP4V_6, -- MMAL_VIDEO_LEVEL_H264_1, -- MMAL_VIDEO_LEVEL_H264_1b, -- MMAL_VIDEO_LEVEL_H264_11, -- MMAL_VIDEO_LEVEL_H264_12, -- MMAL_VIDEO_LEVEL_H264_13, -- MMAL_VIDEO_LEVEL_H264_2, -- MMAL_VIDEO_LEVEL_H264_21, -- MMAL_VIDEO_LEVEL_H264_22, -- MMAL_VIDEO_LEVEL_H264_3, -- MMAL_VIDEO_LEVEL_H264_31, -- MMAL_VIDEO_LEVEL_H264_32, -- MMAL_VIDEO_LEVEL_H264_4, -- MMAL_VIDEO_LEVEL_H264_41, -- MMAL_VIDEO_LEVEL_H264_42, -- MMAL_VIDEO_LEVEL_H264_5, -- MMAL_VIDEO_LEVEL_H264_51, -- MMAL_VIDEO_LEVEL_DUMMY = 0x7FFFFFFF --}; -- --struct mmal_parameter_video_profile { -- enum mmal_video_profile profile; -- enum mmal_video_level level; --}; -- --/* video parameters */ -- --enum mmal_parameter_video_type { -- /** @ref MMAL_DISPLAYREGION_T */ -- MMAL_PARAMETER_DISPLAYREGION = MMAL_PARAMETER_GROUP_VIDEO, -- -- /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ -- MMAL_PARAMETER_SUPPORTED_PROFILES, -- -- /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ -- MMAL_PARAMETER_PROFILE, -- -- /** @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_INTRAPERIOD, -- -- /** @ref MMAL_PARAMETER_VIDEO_RATECONTROL_T */ -- MMAL_PARAMETER_RATECONTROL, -- -- /** @ref MMAL_PARAMETER_VIDEO_NALUNITFORMAT_T */ -- MMAL_PARAMETER_NALUNITFORMAT, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_MINIMISE_FRAGMENTATION, -- -- /** @ref MMAL_PARAMETER_UINT32_T. -- * Setting the value to zero resets to the default (one slice per -- * frame). -- */ -- MMAL_PARAMETER_MB_ROWS_PER_SLICE, -- -- /** @ref MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION_T */ -- MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION, -- -- /** @ref MMAL_PARAMETER_VIDEO_EEDE_ENABLE_T */ -- MMAL_PARAMETER_VIDEO_EEDE_ENABLE, -- -- /** @ref MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE_T */ -- MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T. Request an I-frame. */ -- MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME, -- /** @ref MMAL_PARAMETER_VIDEO_INTRA_REFRESH_T */ -- MMAL_PARAMETER_VIDEO_INTRA_REFRESH, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -- MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, -- -- /** @ref MMAL_PARAMETER_UINT32_T. Run-time bit rate control */ -- MMAL_PARAMETER_VIDEO_BIT_RATE, -- -- /** @ref MMAL_PARAMETER_FRAME_RATE_T */ -- MMAL_PARAMETER_VIDEO_FRAME_RATE, -- -- /** @ref MMAL_PARAMETER_UINT32_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_MIN_QUANT, -- -- /** @ref MMAL_PARAMETER_UINT32_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_MAX_QUANT, -- -- /** @ref MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL, -- -- MMAL_PARAMETER_EXTRA_BUFFERS, /**< @ref MMAL_PARAMETER_UINT32_T. */ -- /** @ref MMAL_PARAMETER_UINT32_T. -- * Changing this parameter from the default can reduce frame rate -- * because image buffers need to be re-pitched. -- */ -- MMAL_PARAMETER_VIDEO_ALIGN_HORIZ, -- -- /** @ref MMAL_PARAMETER_UINT32_T. -- * Changing this parameter from the default can reduce frame rate -- * because image buffers need to be re-pitched. -- */ -- MMAL_PARAMETER_VIDEO_ALIGN_VERT, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -- MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAMES, -- -- /** @ref MMAL_PARAMETER_UINT32_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_INITIAL_QUANT, -- -- /**< @ref MMAL_PARAMETER_UINT32_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_QP_P, -- -- /**< @ref MMAL_PARAMETER_UINT32_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_RC_SLICE_DQUANT, -- -- /** @ref MMAL_PARAMETER_UINT32_T */ -- MMAL_PARAMETER_VIDEO_ENCODE_FRAME_LIMIT_BITS, -- -- /** @ref MMAL_PARAMETER_UINT32_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_PEAK_RATE, -- -- /* H264 specific parameters */ -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_H264_DISABLE_CABAC, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_LATENCY, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_H264_AU_DELIMITERS, -- -- /** @ref MMAL_PARAMETER_UINT32_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_H264_DEBLOCK_IDC, -- -- /** @ref MMAL_PARAMETER_VIDEO_ENCODER_H264_MB_INTRA_MODES_T. */ -- MMAL_PARAMETER_VIDEO_ENCODE_H264_MB_INTRA_MODE, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_VIDEO_ENCODE_HEADER_ON_OPEN, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_VIDEO_ENCODE_PRECODE_FOR_QP, -- -- /** @ref MMAL_PARAMETER_VIDEO_DRM_INIT_INFO_T. */ -- MMAL_PARAMETER_VIDEO_DRM_INIT_INFO, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_VIDEO_TIMESTAMP_FIFO, -- -- /** @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_VIDEO_DECODE_ERROR_CONCEALMENT, -- -- /** @ref MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER_T. */ -- MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER, -- -- /** @ref MMAL_PARAMETER_BYTES_T */ -- MMAL_PARAMETER_VIDEO_DECODE_CONFIG_VD3, -- -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_VIDEO_ENCODE_H264_VCL_HRD_PARAMETERS, -- -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG, -- -- /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER --}; -- --/** Valid mirror modes */ --enum mmal_parameter_mirror { -- MMAL_PARAM_MIRROR_NONE, -- MMAL_PARAM_MIRROR_VERTICAL, -- MMAL_PARAM_MIRROR_HORIZONTAL, -- MMAL_PARAM_MIRROR_BOTH, --}; -- --enum mmal_parameter_displaytransform { -- MMAL_DISPLAY_ROT0 = 0, -- MMAL_DISPLAY_MIRROR_ROT0 = 1, -- MMAL_DISPLAY_MIRROR_ROT180 = 2, -- MMAL_DISPLAY_ROT180 = 3, -- MMAL_DISPLAY_MIRROR_ROT90 = 4, -- MMAL_DISPLAY_ROT270 = 5, -- MMAL_DISPLAY_ROT90 = 6, -- MMAL_DISPLAY_MIRROR_ROT270 = 7, --}; -- --enum mmal_parameter_displaymode { -- MMAL_DISPLAY_MODE_FILL = 0, -- MMAL_DISPLAY_MODE_LETTERBOX = 1, --}; -- --enum mmal_parameter_displayset { -- MMAL_DISPLAY_SET_NONE = 0, -- MMAL_DISPLAY_SET_NUM = 1, -- MMAL_DISPLAY_SET_FULLSCREEN = 2, -- MMAL_DISPLAY_SET_TRANSFORM = 4, -- MMAL_DISPLAY_SET_DEST_RECT = 8, -- MMAL_DISPLAY_SET_SRC_RECT = 0x10, -- MMAL_DISPLAY_SET_MODE = 0x20, -- MMAL_DISPLAY_SET_PIXEL = 0x40, -- MMAL_DISPLAY_SET_NOASPECT = 0x80, -- MMAL_DISPLAY_SET_LAYER = 0x100, -- MMAL_DISPLAY_SET_COPYPROTECT = 0x200, -- MMAL_DISPLAY_SET_ALPHA = 0x400, --}; -- --/* rectangle, used lots so it gets its own struct */ --struct vchiq_mmal_rect { -- s32 x; -- s32 y; -- s32 width; -- s32 height; --}; -- --struct mmal_parameter_displayregion { -- /** Bitfield that indicates which fields are set and should be -- * used. All other fields will maintain their current value. -- * \ref MMAL_DISPLAYSET_T defines the bits that can be -- * combined. -- */ -- u32 set; -- -- /** Describes the display output device, with 0 typically -- * being a directly connected LCD display. The actual values -- * will depend on the hardware. Code using hard-wired numbers -- * (e.g. 2) is certain to fail. -- */ -- -- u32 display_num; -- /** Indicates that we are using the full device screen area, -- * rather than a window of the display. If zero, then -- * dest_rect is used to specify a region of the display to -- * use. -- */ -- -- s32 fullscreen; -- /** Indicates any rotation or flipping used to map frames onto -- * the natural display orientation. -- */ -- u32 transform; /* enum mmal_parameter_displaytransform */ -- -- /** Where to display the frame within the screen, if -- * fullscreen is zero. -- */ -- struct vchiq_mmal_rect dest_rect; -- -- /** Indicates which area of the frame to display. If all -- * values are zero, the whole frame will be used. -- */ -- struct vchiq_mmal_rect src_rect; -- -- /** If set to non-zero, indicates that any display scaling -- * should disregard the aspect ratio of the frame region being -- * displayed. -- */ -- s32 noaspect; -- -- /** Indicates how the image should be scaled to fit the -- * display. \code MMAL_DISPLAY_MODE_FILL \endcode indicates -- * that the image should fill the screen by potentially -- * cropping the frames. Setting \code mode \endcode to \code -- * MMAL_DISPLAY_MODE_LETTERBOX \endcode indicates that all the -- * source region should be displayed and black bars added if -- * necessary. -- */ -- u32 mode; /* enum mmal_parameter_displaymode */ -- -- /** If non-zero, defines the width of a source pixel relative -- * to \code pixel_y \endcode. If zero, then pixels default to -- * being square. -- */ -- u32 pixel_x; -- -- /** If non-zero, defines the height of a source pixel relative -- * to \code pixel_x \endcode. If zero, then pixels default to -- * being square. -- */ -- u32 pixel_y; -- -- /** Sets the relative depth of the images, with greater values -- * being in front of smaller values. -- */ -- u32 layer; -- -- /** Set to non-zero to ensure copy protection is used on -- * output. -- */ -- s32 copyprotect_required; -- -- /** Level of opacity of the layer, where zero is fully -- * transparent and 255 is fully opaque. -- */ -- u32 alpha; --}; -- --#define MMAL_MAX_IMAGEFX_PARAMETERS 5 -- --struct mmal_parameter_imagefx_parameters { -- enum mmal_parameter_imagefx effect; -- u32 num_effect_params; -- u32 effect_parameter[MMAL_MAX_IMAGEFX_PARAMETERS]; --}; -- --#define MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS 4 --#define MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES 2 --#define MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN 16 -- --struct mmal_parameter_camera_info_camera_t { -- u32 port_id; -- u32 max_width; -- u32 max_height; -- u32 lens_present; -- u8 camera_name[MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN]; --}; -- --enum mmal_parameter_camera_info_flash_type_t { -- /* Make values explicit to ensure they match values in config ini */ -- MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_XENON = 0, -- MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_LED = 1, -- MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_OTHER = 2, -- MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_MAX = 0x7FFFFFFF --}; -- --struct mmal_parameter_camera_info_flash_t { -- enum mmal_parameter_camera_info_flash_type_t flash_type; --}; -- --struct mmal_parameter_camera_info_t { -- u32 num_cameras; -- u32 num_flashes; -- struct mmal_parameter_camera_info_camera_t -- cameras[MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS]; -- struct mmal_parameter_camera_info_flash_t -- flashes[MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES]; --}; -- --#endif ---- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h -+++ /dev/null -@@ -1,166 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --/* -- * Broadcom BM2835 V4L2 driver -- * -- * Copyright © 2013 Raspberry Pi (Trading) Ltd. -- * -- * Authors: Vincent Sanders @ Collabora -- * Dave Stevenson @ Broadcom -- * (now dave.stevenson@raspberrypi.org) -- * Simon Mellor @ Broadcom -- * Luke Diamand @ Broadcom -- * -- * MMAL interface to VCHIQ message passing -- */ -- --#ifndef MMAL_VCHIQ_H --#define MMAL_VCHIQ_H -- --#include "mmal-msg-format.h" -- --#define MAX_PORT_COUNT 4 -- --/* Maximum size of the format extradata. */ --#define MMAL_FORMAT_EXTRADATA_MAX_SIZE 128 -- --struct vchiq_mmal_instance; -- --enum vchiq_mmal_es_type { -- MMAL_ES_TYPE_UNKNOWN, /**< Unknown elementary stream type */ -- MMAL_ES_TYPE_CONTROL, /**< Elementary stream of control commands */ -- MMAL_ES_TYPE_AUDIO, /**< Audio elementary stream */ -- MMAL_ES_TYPE_VIDEO, /**< Video elementary stream */ -- MMAL_ES_TYPE_SUBPICTURE /**< Sub-picture elementary stream */ --}; -- --struct vchiq_mmal_port_buffer { -- unsigned int num; /* number of buffers */ -- u32 size; /* size of buffers */ -- u32 alignment; /* alignment of buffers */ --}; -- --struct vchiq_mmal_port; -- --typedef void (*vchiq_mmal_buffer_cb)( -- struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- int status, struct mmal_buffer *buffer, -- unsigned long length, u32 mmal_flags, s64 dts, s64 pts); -- --struct vchiq_mmal_port { -- bool enabled; -- u32 handle; -- u32 type; /* port type, cached to use on port info set */ -- u32 index; /* port index, cached to use on port info set */ -- -- /* component port belongs to, allows simple deref */ -- struct vchiq_mmal_component *component; -- -- struct vchiq_mmal_port *connected; /* port conencted to */ -- -- /* buffer info */ -- struct vchiq_mmal_port_buffer minimum_buffer; -- struct vchiq_mmal_port_buffer recommended_buffer; -- struct vchiq_mmal_port_buffer current_buffer; -- -- /* stream format */ -- struct mmal_es_format_local format; -- /* elementary stream format */ -- union mmal_es_specific_format es; -- -- /* data buffers to fill */ -- struct list_head buffers; -- /* lock to serialise adding and removing buffers from list */ -- spinlock_t slock; -- -- /* Count of buffers the VPU has yet to return */ -- atomic_t buffers_with_vpu; -- /* callback on buffer completion */ -- vchiq_mmal_buffer_cb buffer_cb; -- /* callback context */ -- void *cb_ctx; --}; -- --struct vchiq_mmal_component { -- bool enabled; -- u32 handle; /* VideoCore handle for component */ -- u32 inputs; /* Number of input ports */ -- u32 outputs; /* Number of output ports */ -- u32 clocks; /* Number of clock ports */ -- struct vchiq_mmal_port control; /* control port */ -- struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */ -- struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */ -- struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */ --}; -- --int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance); --int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance); -- --/* Initialise a mmal component and its ports -- * -- */ --int vchiq_mmal_component_init( -- struct vchiq_mmal_instance *instance, -- const char *name, -- struct vchiq_mmal_component **component_out); -- --int vchiq_mmal_component_finalise( -- struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component); -- --int vchiq_mmal_component_enable( -- struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component); -- --int vchiq_mmal_component_disable( -- struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_component *component); -- --/* enable a mmal port -- * -- * enables a port and if a buffer callback provided enque buffer -- * headers as appropriate for the port. -- */ --int vchiq_mmal_port_enable( -- struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- vchiq_mmal_buffer_cb buffer_cb); -- --/* disable a port -- * -- * disable a port will dequeue any pending buffers -- */ --int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port); -- --int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- u32 parameter, -- void *value, -- u32 value_size); -- --int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- u32 parameter, -- void *value, -- u32 *value_size); -- --int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port); -- --int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *src, -- struct vchiq_mmal_port *dst); -- --int vchiq_mmal_version(struct vchiq_mmal_instance *instance, -- u32 *major_out, -- u32 *minor_out); -- --int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, -- struct vchiq_mmal_port *port, -- struct mmal_buffer *buf); -- --int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, -- struct mmal_buffer *buf); --int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf); --#endif /* MMAL_VCHIQ_H */ ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h -@@ -0,0 +1,61 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom -+ * -+ * MMAL structures -+ * -+ */ -+#ifndef MMAL_COMMON_H -+#define MMAL_COMMON_H -+ -+#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) -+#define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l') -+ -+/** Special value signalling that time is not known */ -+#define MMAL_TIME_UNKNOWN BIT_ULL(63) -+ -+struct mmal_msg_context; -+ -+/* mapping between v4l and mmal video modes */ -+struct mmal_fmt { -+ char *name; -+ u32 fourcc; /* v4l2 format id */ -+ int flags; /* v4l2 flags field */ -+ u32 mmal; -+ int depth; -+ u32 mmal_component; /* MMAL component index to be used to encode */ -+ u32 ybbp; /* depth of first Y plane for planar formats */ -+ bool remove_padding; /* Does the GPU have to remove padding, -+ * or can we do hide padding via bytesperline. -+ */ -+}; -+ -+/* buffer for one video frame */ -+struct mmal_buffer { -+ /* v4l buffer data -- must be first */ -+ struct vb2_v4l2_buffer vb; -+ -+ /* list of buffers available */ -+ struct list_head list; -+ -+ void *buffer; /* buffer pointer */ -+ unsigned long buffer_size; /* size of allocated buffer */ -+ -+ struct mmal_msg_context *msg_context; -+}; -+ -+/* */ -+struct mmal_colourfx { -+ s32 enable; -+ u32 u; -+ u32 v; -+}; -+#endif ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-encodings.h -@@ -0,0 +1,124 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom -+ */ -+#ifndef MMAL_ENCODINGS_H -+#define MMAL_ENCODINGS_H -+ -+#define MMAL_ENCODING_H264 MMAL_FOURCC('H', '2', '6', '4') -+#define MMAL_ENCODING_H263 MMAL_FOURCC('H', '2', '6', '3') -+#define MMAL_ENCODING_MP4V MMAL_FOURCC('M', 'P', '4', 'V') -+#define MMAL_ENCODING_MP2V MMAL_FOURCC('M', 'P', '2', 'V') -+#define MMAL_ENCODING_MP1V MMAL_FOURCC('M', 'P', '1', 'V') -+#define MMAL_ENCODING_WMV3 MMAL_FOURCC('W', 'M', 'V', '3') -+#define MMAL_ENCODING_WMV2 MMAL_FOURCC('W', 'M', 'V', '2') -+#define MMAL_ENCODING_WMV1 MMAL_FOURCC('W', 'M', 'V', '1') -+#define MMAL_ENCODING_WVC1 MMAL_FOURCC('W', 'V', 'C', '1') -+#define MMAL_ENCODING_VP8 MMAL_FOURCC('V', 'P', '8', ' ') -+#define MMAL_ENCODING_VP7 MMAL_FOURCC('V', 'P', '7', ' ') -+#define MMAL_ENCODING_VP6 MMAL_FOURCC('V', 'P', '6', ' ') -+#define MMAL_ENCODING_THEORA MMAL_FOURCC('T', 'H', 'E', 'O') -+#define MMAL_ENCODING_SPARK MMAL_FOURCC('S', 'P', 'R', 'K') -+#define MMAL_ENCODING_MJPEG MMAL_FOURCC('M', 'J', 'P', 'G') -+ -+#define MMAL_ENCODING_JPEG MMAL_FOURCC('J', 'P', 'E', 'G') -+#define MMAL_ENCODING_GIF MMAL_FOURCC('G', 'I', 'F', ' ') -+#define MMAL_ENCODING_PNG MMAL_FOURCC('P', 'N', 'G', ' ') -+#define MMAL_ENCODING_PPM MMAL_FOURCC('P', 'P', 'M', ' ') -+#define MMAL_ENCODING_TGA MMAL_FOURCC('T', 'G', 'A', ' ') -+#define MMAL_ENCODING_BMP MMAL_FOURCC('B', 'M', 'P', ' ') -+ -+#define MMAL_ENCODING_I420 MMAL_FOURCC('I', '4', '2', '0') -+#define MMAL_ENCODING_I420_SLICE MMAL_FOURCC('S', '4', '2', '0') -+#define MMAL_ENCODING_YV12 MMAL_FOURCC('Y', 'V', '1', '2') -+#define MMAL_ENCODING_I422 MMAL_FOURCC('I', '4', '2', '2') -+#define MMAL_ENCODING_I422_SLICE MMAL_FOURCC('S', '4', '2', '2') -+#define MMAL_ENCODING_YUYV MMAL_FOURCC('Y', 'U', 'Y', 'V') -+#define MMAL_ENCODING_YVYU MMAL_FOURCC('Y', 'V', 'Y', 'U') -+#define MMAL_ENCODING_UYVY MMAL_FOURCC('U', 'Y', 'V', 'Y') -+#define MMAL_ENCODING_VYUY MMAL_FOURCC('V', 'Y', 'U', 'Y') -+#define MMAL_ENCODING_NV12 MMAL_FOURCC('N', 'V', '1', '2') -+#define MMAL_ENCODING_NV21 MMAL_FOURCC('N', 'V', '2', '1') -+#define MMAL_ENCODING_ARGB MMAL_FOURCC('A', 'R', 'G', 'B') -+#define MMAL_ENCODING_RGBA MMAL_FOURCC('R', 'G', 'B', 'A') -+#define MMAL_ENCODING_ABGR MMAL_FOURCC('A', 'B', 'G', 'R') -+#define MMAL_ENCODING_BGRA MMAL_FOURCC('B', 'G', 'R', 'A') -+#define MMAL_ENCODING_RGB16 MMAL_FOURCC('R', 'G', 'B', '2') -+#define MMAL_ENCODING_RGB24 MMAL_FOURCC('R', 'G', 'B', '3') -+#define MMAL_ENCODING_RGB32 MMAL_FOURCC('R', 'G', 'B', '4') -+#define MMAL_ENCODING_BGR16 MMAL_FOURCC('B', 'G', 'R', '2') -+#define MMAL_ENCODING_BGR24 MMAL_FOURCC('B', 'G', 'R', '3') -+#define MMAL_ENCODING_BGR32 MMAL_FOURCC('B', 'G', 'R', '4') -+ -+/** SAND Video (YUVUV128) format, native format understood by VideoCore. -+ * This format is *not* opaque - if requested you will receive full frames -+ * of YUV_UV video. -+ */ -+#define MMAL_ENCODING_YUVUV128 MMAL_FOURCC('S', 'A', 'N', 'D') -+ -+/** VideoCore opaque image format, image handles are returned to -+ * the host but not the actual image data. -+ */ -+#define MMAL_ENCODING_OPAQUE MMAL_FOURCC('O', 'P', 'Q', 'V') -+ -+/** An EGL image handle -+ */ -+#define MMAL_ENCODING_EGL_IMAGE MMAL_FOURCC('E', 'G', 'L', 'I') -+ -+/* }@ */ -+ -+/** \name Pre-defined audio encodings */ -+/* @{ */ -+#define MMAL_ENCODING_PCM_UNSIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'U') -+#define MMAL_ENCODING_PCM_UNSIGNED_LE MMAL_FOURCC('p', 'c', 'm', 'u') -+#define MMAL_ENCODING_PCM_SIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'S') -+#define MMAL_ENCODING_PCM_SIGNED_LE MMAL_FOURCC('p', 'c', 'm', 's') -+#define MMAL_ENCODING_PCM_FLOAT_BE MMAL_FOURCC('P', 'C', 'M', 'F') -+#define MMAL_ENCODING_PCM_FLOAT_LE MMAL_FOURCC('p', 'c', 'm', 'f') -+ -+/* Pre-defined H264 encoding variants */ -+ -+/** ISO 14496-10 Annex B byte stream format */ -+#define MMAL_ENCODING_VARIANT_H264_DEFAULT 0 -+/** ISO 14496-15 AVC stream format */ -+#define MMAL_ENCODING_VARIANT_H264_AVC1 MMAL_FOURCC('A', 'V', 'C', '1') -+/** Implicitly delineated NAL units without emulation prevention */ -+#define MMAL_ENCODING_VARIANT_H264_RAW MMAL_FOURCC('R', 'A', 'W', ' ') -+ -+/** \defgroup MmalColorSpace List of pre-defined video color spaces -+ * This defines a list of common color spaces. This list isn't exhaustive and -+ * is only provided as a convenience to avoid clients having to use FourCC -+ * codes directly. However components are allowed to define and use their own -+ * FourCC codes. -+ */ -+/* @{ */ -+ -+/** Unknown color space */ -+#define MMAL_COLOR_SPACE_UNKNOWN 0 -+/** ITU-R BT.601-5 [SDTV] */ -+#define MMAL_COLOR_SPACE_ITUR_BT601 MMAL_FOURCC('Y', '6', '0', '1') -+/** ITU-R BT.709-3 [HDTV] */ -+#define MMAL_COLOR_SPACE_ITUR_BT709 MMAL_FOURCC('Y', '7', '0', '9') -+/** JPEG JFIF */ -+#define MMAL_COLOR_SPACE_JPEG_JFIF MMAL_FOURCC('Y', 'J', 'F', 'I') -+/** Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ -+#define MMAL_COLOR_SPACE_FCC MMAL_FOURCC('Y', 'F', 'C', 'C') -+/** Society of Motion Picture and Television Engineers 240M (1999) */ -+#define MMAL_COLOR_SPACE_SMPTE240M MMAL_FOURCC('Y', '2', '4', '0') -+/** ITU-R BT.470-2 System M */ -+#define MMAL_COLOR_SPACE_BT470_2_M MMAL_FOURCC('Y', '_', '_', 'M') -+/** ITU-R BT.470-2 System BG */ -+#define MMAL_COLOR_SPACE_BT470_2_BG MMAL_FOURCC('Y', '_', 'B', 'G') -+/** JPEG JFIF, but with 16..255 luma */ -+#define MMAL_COLOR_SPACE_JFIF_Y16_255 MMAL_FOURCC('Y', 'Y', '1', '6') -+/* @} MmalColorSpace List */ -+ -+#endif /* MMAL_ENCODINGS_H */ ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg-common.h -@@ -0,0 +1,48 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom -+ */ -+ -+#ifndef MMAL_MSG_COMMON_H -+#define MMAL_MSG_COMMON_H -+ -+enum mmal_msg_status { -+ MMAL_MSG_STATUS_SUCCESS = 0, /**< Success */ -+ MMAL_MSG_STATUS_ENOMEM, /**< Out of memory */ -+ MMAL_MSG_STATUS_ENOSPC, /**< Out of resources other than memory */ -+ MMAL_MSG_STATUS_EINVAL, /**< Argument is invalid */ -+ MMAL_MSG_STATUS_ENOSYS, /**< Function not implemented */ -+ MMAL_MSG_STATUS_ENOENT, /**< No such file or directory */ -+ MMAL_MSG_STATUS_ENXIO, /**< No such device or address */ -+ MMAL_MSG_STATUS_EIO, /**< I/O error */ -+ MMAL_MSG_STATUS_ESPIPE, /**< Illegal seek */ -+ MMAL_MSG_STATUS_ECORRUPT, /**< Data is corrupt \attention */ -+ MMAL_MSG_STATUS_ENOTREADY, /**< Component is not ready */ -+ MMAL_MSG_STATUS_ECONFIG, /**< Component is not configured */ -+ MMAL_MSG_STATUS_EISCONN, /**< Port is already connected */ -+ MMAL_MSG_STATUS_ENOTCONN, /**< Port is disconnected */ -+ MMAL_MSG_STATUS_EAGAIN, /**< Resource temporarily unavailable. */ -+ MMAL_MSG_STATUS_EFAULT, /**< Bad address */ -+}; -+ -+struct mmal_rect { -+ s32 x; /**< x coordinate (from left) */ -+ s32 y; /**< y coordinate (from top) */ -+ s32 width; /**< width */ -+ s32 height; /**< height */ -+}; -+ -+struct mmal_rational { -+ s32 num; /**< Numerator */ -+ s32 den; /**< Denominator */ -+}; -+ -+#endif /* MMAL_MSG_COMMON_H */ ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg-format.h -@@ -0,0 +1,106 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom -+ */ -+ -+#ifndef MMAL_MSG_FORMAT_H -+#define MMAL_MSG_FORMAT_H -+ -+#include "mmal-msg-common.h" -+ -+/* MMAL_ES_FORMAT_T */ -+ -+struct mmal_audio_format { -+ u32 channels; /* Number of audio channels */ -+ u32 sample_rate; /* Sample rate */ -+ -+ u32 bits_per_sample; /* Bits per sample */ -+ u32 block_align; /* Size of a block of data */ -+}; -+ -+struct mmal_video_format { -+ u32 width; /* Width of frame in pixels */ -+ u32 height; /* Height of frame in rows of pixels */ -+ struct mmal_rect crop; /* Visible region of the frame */ -+ struct mmal_rational frame_rate; /* Frame rate */ -+ struct mmal_rational par; /* Pixel aspect ratio */ -+ -+ /* -+ * FourCC specifying the color space of the video stream. See the -+ * MmalColorSpace "pre-defined color spaces" for some examples. -+ */ -+ u32 color_space; -+}; -+ -+struct mmal_subpicture_format { -+ u32 x_offset; -+ u32 y_offset; -+}; -+ -+union mmal_es_specific_format { -+ struct mmal_audio_format audio; -+ struct mmal_video_format video; -+ struct mmal_subpicture_format subpicture; -+}; -+ -+/* Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ -+struct mmal_es_format_local { -+ u32 type; /* enum mmal_es_type */ -+ -+ u32 encoding; /* FourCC specifying encoding of the elementary -+ * stream. -+ */ -+ u32 encoding_variant; /* FourCC specifying the specific -+ * encoding variant of the elementary -+ * stream. -+ */ -+ -+ union mmal_es_specific_format *es; /* Type specific -+ * information for the -+ * elementary stream -+ */ -+ -+ u32 bitrate; /* Bitrate in bits per second */ -+ u32 flags; /* Flags describing properties of the elementary -+ * stream. -+ */ -+ -+ u32 extradata_size; /* Size of the codec specific data */ -+ u8 *extradata; /* Codec specific data */ -+}; -+ -+/* Remote definition of an elementary stream format (MMAL_ES_FORMAT_T) */ -+struct mmal_es_format { -+ u32 type; /* enum mmal_es_type */ -+ -+ u32 encoding; /* FourCC specifying encoding of the elementary -+ * stream. -+ */ -+ u32 encoding_variant; /* FourCC specifying the specific -+ * encoding variant of the elementary -+ * stream. -+ */ -+ -+ u32 es; /* Type specific -+ * information for the -+ * elementary stream -+ */ -+ -+ u32 bitrate; /* Bitrate in bits per second */ -+ u32 flags; /* Flags describing properties of the elementary -+ * stream. -+ */ -+ -+ u32 extradata_size; /* Size of the codec specific data */ -+ u32 extradata; /* Codec specific data */ -+}; -+ -+#endif /* MMAL_MSG_FORMAT_H */ ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg-port.h -@@ -0,0 +1,109 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom -+ */ -+ -+/* MMAL_PORT_TYPE_T */ -+enum mmal_port_type { -+ MMAL_PORT_TYPE_UNKNOWN = 0, /* Unknown port type */ -+ MMAL_PORT_TYPE_CONTROL, /* Control port */ -+ MMAL_PORT_TYPE_INPUT, /* Input port */ -+ MMAL_PORT_TYPE_OUTPUT, /* Output port */ -+ MMAL_PORT_TYPE_CLOCK, /* Clock port */ -+}; -+ -+/* The port is pass-through and doesn't need buffer headers allocated */ -+#define MMAL_PORT_CAPABILITY_PASSTHROUGH 0x01 -+/* -+ *The port wants to allocate the buffer payloads. -+ * This signals a preference that payload allocation should be done -+ * on this port for efficiency reasons. -+ */ -+#define MMAL_PORT_CAPABILITY_ALLOCATION 0x02 -+/* -+ * The port supports format change events. -+ * This applies to input ports and is used to let the client know -+ * whether the port supports being reconfigured via a format -+ * change event (i.e. without having to disable the port). -+ */ -+#define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE 0x04 -+ -+/* -+ * mmal port structure (MMAL_PORT_T) -+ * -+ * most elements are informational only, the pointer values for -+ * interogation messages are generally provided as additional -+ * structures within the message. When used to set values only the -+ * buffer_num, buffer_size and userdata parameters are writable. -+ */ -+struct mmal_port { -+ u32 priv; /* Private member used by the framework */ -+ u32 name; /* Port name. Used for debugging purposes (RO) */ -+ -+ u32 type; /* Type of the port (RO) enum mmal_port_type */ -+ u16 index; /* Index of the port in its type list (RO) */ -+ u16 index_all; /* Index of the port in the list of all ports (RO) */ -+ -+ u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ -+ u32 format; /* Format of the elementary stream */ -+ -+ u32 buffer_num_min; /* Minimum number of buffers the port -+ * requires (RO). This is set by the -+ * component. -+ */ -+ -+ u32 buffer_size_min; /* Minimum size of buffers the port -+ * requires (RO). This is set by the -+ * component. -+ */ -+ -+ u32 buffer_alignment_min;/* Minimum alignment requirement for -+ * the buffers (RO). A value of -+ * zero means no special alignment -+ * requirements. This is set by the -+ * component. -+ */ -+ -+ u32 buffer_num_recommended; /* Number of buffers the port -+ * recommends for optimal -+ * performance (RO). A value of -+ * zero means no special -+ * recommendation. This is set -+ * by the component. -+ */ -+ -+ u32 buffer_size_recommended; /* Size of buffers the port -+ * recommends for optimal -+ * performance (RO). A value of -+ * zero means no special -+ * recommendation. This is set -+ * by the component. -+ */ -+ -+ u32 buffer_num; /* Actual number of buffers the port will use. -+ * This is set by the client. -+ */ -+ -+ u32 buffer_size; /* Actual maximum size of the buffers that -+ * will be sent to the port. This is set by -+ * the client. -+ */ -+ -+ u32 component; /* Component this port belongs to (Read Only) */ -+ -+ u32 userdata; /* Field reserved for use by the client */ -+ -+ u32 capabilities; /* Flags describing the capabilities of a -+ * port (RO). Bitwise combination of \ref -+ * portcapabilities "Port capabilities" -+ * values. -+ */ -+}; ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h -@@ -0,0 +1,406 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom -+ */ -+ -+/* -+ * all the data structures which serialise the MMAL protocol. note -+ * these are directly mapped onto the recived message data. -+ * -+ * BEWARE: They seem to *assume* pointers are u32 and that there is no -+ * structure padding! -+ * -+ * NOTE: this implementation uses kernel types to ensure sizes. Rather -+ * than assigning values to enums to force their size the -+ * implementation uses fixed size types and not the enums (though the -+ * comments have the actual enum type -+ */ -+#ifndef MMAL_MSG_H -+#define MMAL_MSG_H -+ -+#define VC_MMAL_VER 15 -+#define VC_MMAL_MIN_VER 10 -+#define VC_MMAL_SERVER_NAME MAKE_FOURCC("mmal") -+ -+/* max total message size is 512 bytes */ -+#define MMAL_MSG_MAX_SIZE 512 -+/* with six 32bit header elements max payload is therefore 488 bytes */ -+#define MMAL_MSG_MAX_PAYLOAD 488 -+ -+#include "mmal-msg-common.h" -+#include "mmal-msg-format.h" -+#include "mmal-msg-port.h" -+ -+enum mmal_msg_type { -+ MMAL_MSG_TYPE_QUIT = 1, -+ MMAL_MSG_TYPE_SERVICE_CLOSED, -+ MMAL_MSG_TYPE_GET_VERSION, -+ MMAL_MSG_TYPE_COMPONENT_CREATE, -+ MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ -+ MMAL_MSG_TYPE_COMPONENT_ENABLE, -+ MMAL_MSG_TYPE_COMPONENT_DISABLE, -+ MMAL_MSG_TYPE_PORT_INFO_GET, -+ MMAL_MSG_TYPE_PORT_INFO_SET, -+ MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ -+ MMAL_MSG_TYPE_BUFFER_FROM_HOST, -+ MMAL_MSG_TYPE_BUFFER_TO_HOST, -+ MMAL_MSG_TYPE_GET_STATS, -+ MMAL_MSG_TYPE_PORT_PARAMETER_SET, -+ MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ -+ MMAL_MSG_TYPE_EVENT_TO_HOST, -+ MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT, -+ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR, -+ MMAL_MSG_TYPE_CONSUME_MEM, -+ MMAL_MSG_TYPE_LMK, /* 20 */ -+ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC, -+ MMAL_MSG_TYPE_DRM_GET_LHS32, -+ MMAL_MSG_TYPE_DRM_GET_TIME, -+ MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN, -+ MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ -+ MMAL_MSG_TYPE_HOST_LOG, -+ MMAL_MSG_TYPE_MSG_LAST -+}; -+ -+/* port action request messages differ depending on the action type */ -+enum mmal_msg_port_action_type { -+ MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unknown action */ -+ MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ -+ MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ -+ MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ -+ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ -+ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ -+ MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/ -+}; -+ -+struct mmal_msg_header { -+ u32 magic; -+ u32 type; /* enum mmal_msg_type */ -+ -+ /* Opaque handle to the control service */ -+ u32 control_service; -+ -+ u32 context; /* a u32 per message context */ -+ u32 status; /* The status of the vchiq operation */ -+ u32 padding; -+}; -+ -+/* Send from VC to host to report version */ -+struct mmal_msg_version { -+ u32 flags; -+ u32 major; -+ u32 minor; -+ u32 minimum; -+}; -+ -+/* request to VC to create component */ -+struct mmal_msg_component_create { -+ u32 client_component; /* component context */ -+ char name[128]; -+ u32 pid; /* For debug */ -+}; -+ -+/* reply from VC to component creation request */ -+struct mmal_msg_component_create_reply { -+ u32 status; /* enum mmal_msg_status - how does this differ to -+ * the one in the header? -+ */ -+ u32 component_handle; /* VideoCore handle for component */ -+ u32 input_num; /* Number of input ports */ -+ u32 output_num; /* Number of output ports */ -+ u32 clock_num; /* Number of clock ports */ -+}; -+ -+/* request to VC to destroy a component */ -+struct mmal_msg_component_destroy { -+ u32 component_handle; -+}; -+ -+struct mmal_msg_component_destroy_reply { -+ u32 status; /* The component destruction status */ -+}; -+ -+/* request and reply to VC to enable a component */ -+struct mmal_msg_component_enable { -+ u32 component_handle; -+}; -+ -+struct mmal_msg_component_enable_reply { -+ u32 status; /* The component enable status */ -+}; -+ -+/* request and reply to VC to disable a component */ -+struct mmal_msg_component_disable { -+ u32 component_handle; -+}; -+ -+struct mmal_msg_component_disable_reply { -+ u32 status; /* The component disable status */ -+}; -+ -+/* request to VC to get port information */ -+struct mmal_msg_port_info_get { -+ u32 component_handle; /* component handle port is associated with */ -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 index; /* port index to query */ -+}; -+ -+/* reply from VC to get port info request */ -+struct mmal_msg_port_info_get_reply { -+ u32 status; /* enum mmal_msg_status */ -+ u32 component_handle; /* component handle port is associated with */ -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 port_index; /* port indexed in query */ -+ s32 found; /* unused */ -+ u32 port_handle; /* Handle to use for this port */ -+ struct mmal_port port; -+ struct mmal_es_format format; /* elementary stream format */ -+ union mmal_es_specific_format es; /* es type specific data */ -+ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; /* es extra data */ -+}; -+ -+/* request to VC to set port information */ -+struct mmal_msg_port_info_set { -+ u32 component_handle; -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 port_index; /* port indexed in query */ -+ struct mmal_port port; -+ struct mmal_es_format format; -+ union mmal_es_specific_format es; -+ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; -+}; -+ -+/* reply from VC to port info set request */ -+struct mmal_msg_port_info_set_reply { -+ u32 status; -+ u32 component_handle; /* component handle port is associated with */ -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 index; /* port indexed in query */ -+ s32 found; /* unused */ -+ u32 port_handle; /* Handle to use for this port */ -+ struct mmal_port port; -+ struct mmal_es_format format; -+ union mmal_es_specific_format es; -+ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; -+}; -+ -+/* port action requests that take a mmal_port as a parameter */ -+struct mmal_msg_port_action_port { -+ u32 component_handle; -+ u32 port_handle; -+ u32 action; /* enum mmal_msg_port_action_type */ -+ struct mmal_port port; -+}; -+ -+/* port action requests that take handles as a parameter */ -+struct mmal_msg_port_action_handle { -+ u32 component_handle; -+ u32 port_handle; -+ u32 action; /* enum mmal_msg_port_action_type */ -+ u32 connect_component_handle; -+ u32 connect_port_handle; -+}; -+ -+struct mmal_msg_port_action_reply { -+ u32 status; /* The port action operation status */ -+}; -+ -+/* MMAL buffer transfer */ -+ -+/* Size of space reserved in a buffer message for short messages. */ -+#define MMAL_VC_SHORT_DATA 128 -+ -+/* Signals that the current payload is the end of the stream of data */ -+#define MMAL_BUFFER_HEADER_FLAG_EOS BIT(0) -+/* Signals that the start of the current payload starts a frame */ -+#define MMAL_BUFFER_HEADER_FLAG_FRAME_START BIT(1) -+/* Signals that the end of the current payload ends a frame */ -+#define MMAL_BUFFER_HEADER_FLAG_FRAME_END BIT(2) -+/* Signals that the current payload contains only complete frames (>1) */ -+#define MMAL_BUFFER_HEADER_FLAG_FRAME \ -+ (MMAL_BUFFER_HEADER_FLAG_FRAME_START | \ -+ MMAL_BUFFER_HEADER_FLAG_FRAME_END) -+/* Signals that the current payload is a keyframe (i.e. self decodable) */ -+#define MMAL_BUFFER_HEADER_FLAG_KEYFRAME BIT(3) -+/* -+ * Signals a discontinuity in the stream of data (e.g. after a seek). -+ * Can be used for instance by a decoder to reset its state -+ */ -+#define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY BIT(4) -+/* -+ * Signals a buffer containing some kind of config data for the component -+ * (e.g. codec config data) -+ */ -+#define MMAL_BUFFER_HEADER_FLAG_CONFIG BIT(5) -+/* Signals an encrypted payload */ -+#define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED BIT(6) -+/* Signals a buffer containing side information */ -+#define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO BIT(7) -+/* -+ * Signals a buffer which is the snapshot/postview image from a stills -+ * capture -+ */ -+#define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT BIT(8) -+/* Signals a buffer which contains data known to be corrupted */ -+#define MMAL_BUFFER_HEADER_FLAG_CORRUPTED BIT(9) -+/* Signals that a buffer failed to be transmitted */ -+#define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED BIT(10) -+ -+struct mmal_driver_buffer { -+ u32 magic; -+ u32 component_handle; -+ u32 port_handle; -+ u32 client_context; -+}; -+ -+/* buffer header */ -+struct mmal_buffer_header { -+ u32 next; /* next header */ -+ u32 priv; /* framework private data */ -+ u32 cmd; -+ u32 data; -+ u32 alloc_size; -+ u32 length; -+ u32 offset; -+ u32 flags; -+ s64 pts; -+ s64 dts; -+ u32 type; -+ u32 user_data; -+}; -+ -+struct mmal_buffer_header_type_specific { -+ union { -+ struct { -+ u32 planes; -+ u32 offset[4]; -+ u32 pitch[4]; -+ u32 flags; -+ } video; -+ } u; -+}; -+ -+struct mmal_msg_buffer_from_host { -+ /* -+ *The front 32 bytes of the buffer header are copied -+ * back to us in the reply to allow for context. This -+ * area is used to store two mmal_driver_buffer structures to -+ * allow for multiple concurrent service users. -+ */ -+ /* control data */ -+ struct mmal_driver_buffer drvbuf; -+ -+ /* referenced control data for passthrough buffer management */ -+ struct mmal_driver_buffer drvbuf_ref; -+ struct mmal_buffer_header buffer_header; /* buffer header itself */ -+ struct mmal_buffer_header_type_specific buffer_header_type_specific; -+ s32 is_zero_copy; -+ s32 has_reference; -+ -+ /* allows short data to be xfered in control message */ -+ u32 payload_in_message; -+ u8 short_data[MMAL_VC_SHORT_DATA]; -+}; -+ -+/* port parameter setting */ -+ -+#define MMAL_WORKER_PORT_PARAMETER_SPACE 96 -+ -+struct mmal_msg_port_parameter_set { -+ u32 component_handle; /* component */ -+ u32 port_handle; /* port */ -+ u32 id; /* Parameter ID */ -+ u32 size; /* Parameter size */ -+ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; -+}; -+ -+struct mmal_msg_port_parameter_set_reply { -+ u32 status; /* enum mmal_msg_status todo: how does this -+ * differ to the one in the header? -+ */ -+}; -+ -+/* port parameter getting */ -+ -+struct mmal_msg_port_parameter_get { -+ u32 component_handle; /* component */ -+ u32 port_handle; /* port */ -+ u32 id; /* Parameter ID */ -+ u32 size; /* Parameter size */ -+}; -+ -+struct mmal_msg_port_parameter_get_reply { -+ u32 status; /* Status of mmal_port_parameter_get call */ -+ u32 id; /* Parameter ID */ -+ u32 size; /* Parameter size */ -+ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; -+}; -+ -+/* event messages */ -+#define MMAL_WORKER_EVENT_SPACE 256 -+ -+struct mmal_msg_event_to_host { -+ u32 client_component; /* component context */ -+ -+ u32 port_type; -+ u32 port_num; -+ -+ u32 cmd; -+ u32 length; -+ u8 data[MMAL_WORKER_EVENT_SPACE]; -+ u32 delayed_buffer; -+}; -+ -+/* all mmal messages are serialised through this structure */ -+struct mmal_msg { -+ /* header */ -+ struct mmal_msg_header h; -+ /* payload */ -+ union { -+ struct mmal_msg_version version; -+ -+ struct mmal_msg_component_create component_create; -+ struct mmal_msg_component_create_reply component_create_reply; -+ -+ struct mmal_msg_component_destroy component_destroy; -+ struct mmal_msg_component_destroy_reply component_destroy_reply; -+ -+ struct mmal_msg_component_enable component_enable; -+ struct mmal_msg_component_enable_reply component_enable_reply; -+ -+ struct mmal_msg_component_disable component_disable; -+ struct mmal_msg_component_disable_reply component_disable_reply; -+ -+ struct mmal_msg_port_info_get port_info_get; -+ struct mmal_msg_port_info_get_reply port_info_get_reply; -+ -+ struct mmal_msg_port_info_set port_info_set; -+ struct mmal_msg_port_info_set_reply port_info_set_reply; -+ -+ struct mmal_msg_port_action_port port_action_port; -+ struct mmal_msg_port_action_handle port_action_handle; -+ struct mmal_msg_port_action_reply port_action_reply; -+ -+ struct mmal_msg_buffer_from_host buffer_from_host; -+ -+ struct mmal_msg_port_parameter_set port_parameter_set; -+ struct mmal_msg_port_parameter_set_reply -+ port_parameter_set_reply; -+ struct mmal_msg_port_parameter_get -+ port_parameter_get; -+ struct mmal_msg_port_parameter_get_reply -+ port_parameter_get_reply; -+ -+ struct mmal_msg_event_to_host event_to_host; -+ -+ u8 payload[MMAL_MSG_MAX_PAYLOAD]; -+ } u; -+}; -+#endif ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h -@@ -0,0 +1,755 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom -+ */ -+ -+/* common parameters */ -+ -+/** @name Parameter groups -+ * Parameters are divided into groups, and then allocated sequentially within -+ * a group using an enum. -+ * @{ -+ */ -+ -+#ifndef MMAL_PARAMETERS_H -+#define MMAL_PARAMETERS_H -+ -+/** Common parameter ID group, used with many types of component. */ -+#define MMAL_PARAMETER_GROUP_COMMON (0 << 16) -+/** Camera-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_CAMERA (1 << 16) -+/** Video-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_VIDEO (2 << 16) -+/** Audio-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_AUDIO (3 << 16) -+/** Clock-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_CLOCK (4 << 16) -+/** Miracast-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_MIRACAST (5 << 16) -+ -+/* Common parameters */ -+enum mmal_parameter_common_type { -+ /**< Never a valid parameter ID */ -+ MMAL_PARAMETER_UNUSED = MMAL_PARAMETER_GROUP_COMMON, -+ -+ /**< MMAL_PARAMETER_ENCODING_T */ -+ MMAL_PARAMETER_SUPPORTED_ENCODINGS, -+ /**< MMAL_PARAMETER_URI_T */ -+ MMAL_PARAMETER_URI, -+ /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ -+ MMAL_PARAMETER_CHANGE_EVENT_REQUEST, -+ /** MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ZERO_COPY, -+ /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ -+ MMAL_PARAMETER_BUFFER_REQUIREMENTS, -+ /**< MMAL_PARAMETER_STATISTICS_T */ -+ MMAL_PARAMETER_STATISTICS, -+ /**< MMAL_PARAMETER_CORE_STATISTICS_T */ -+ MMAL_PARAMETER_CORE_STATISTICS, -+ /**< MMAL_PARAMETER_MEM_USAGE_T */ -+ MMAL_PARAMETER_MEM_USAGE, -+ /**< MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_BUFFER_FLAG_FILTER, -+ /**< MMAL_PARAMETER_SEEK_T */ -+ MMAL_PARAMETER_SEEK, -+ /**< MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_POWERMON_ENABLE, -+ /**< MMAL_PARAMETER_LOGGING_T */ -+ MMAL_PARAMETER_LOGGING, -+ /**< MMAL_PARAMETER_UINT64_T */ -+ MMAL_PARAMETER_SYSTEM_TIME, -+ /**< MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_NO_IMAGE_PADDING, -+}; -+ -+/* camera parameters */ -+ -+enum mmal_parameter_camera_type { -+ /* 0 */ -+ /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ -+ MMAL_PARAMETER_THUMBNAIL_CONFIGURATION = -+ MMAL_PARAMETER_GROUP_CAMERA, -+ /**< Unused? */ -+ MMAL_PARAMETER_CAPTURE_QUALITY, -+ /**< @ref MMAL_PARAMETER_INT32_T */ -+ MMAL_PARAMETER_ROTATION, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_EXIF_DISABLE, -+ /**< @ref MMAL_PARAMETER_EXIF_T */ -+ MMAL_PARAMETER_EXIF, -+ /**< @ref MMAL_PARAM_AWBMODE_T */ -+ MMAL_PARAMETER_AWB_MODE, -+ /**< @ref MMAL_PARAMETER_IMAGEFX_T */ -+ MMAL_PARAMETER_IMAGE_EFFECT, -+ /**< @ref MMAL_PARAMETER_COLOURFX_T */ -+ MMAL_PARAMETER_COLOUR_EFFECT, -+ /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ -+ MMAL_PARAMETER_FLICKER_AVOID, -+ /**< @ref MMAL_PARAMETER_FLASH_T */ -+ MMAL_PARAMETER_FLASH, -+ /**< @ref MMAL_PARAMETER_REDEYE_T */ -+ MMAL_PARAMETER_REDEYE, -+ /**< @ref MMAL_PARAMETER_FOCUS_T */ -+ MMAL_PARAMETER_FOCUS, -+ /**< Unused? */ -+ MMAL_PARAMETER_FOCAL_LENGTHS, -+ /**< @ref MMAL_PARAMETER_INT32_T */ -+ MMAL_PARAMETER_EXPOSURE_COMP, -+ /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ -+ MMAL_PARAMETER_ZOOM, -+ /**< @ref MMAL_PARAMETER_MIRROR_T */ -+ MMAL_PARAMETER_MIRROR, -+ -+ /* 0x10 */ -+ /**< @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_CAMERA_NUM, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_CAPTURE, -+ /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ -+ MMAL_PARAMETER_EXPOSURE_MODE, -+ /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ -+ MMAL_PARAMETER_EXP_METERING_MODE, -+ /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ -+ MMAL_PARAMETER_FOCUS_STATUS, -+ /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ -+ MMAL_PARAMETER_CAMERA_CONFIG, -+ /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ -+ MMAL_PARAMETER_CAPTURE_STATUS, -+ /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ -+ MMAL_PARAMETER_FACE_TRACK, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, -+ /**< @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_JPEG_Q_FACTOR, -+ /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ -+ MMAL_PARAMETER_FRAME_RATE, -+ /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ -+ MMAL_PARAMETER_USE_STC, -+ /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ -+ MMAL_PARAMETER_CAMERA_INFO, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_STABILISATION, -+ /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ -+ MMAL_PARAMETER_FACE_TRACK_RESULTS, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ENABLE_RAW_CAPTURE, -+ -+ /* 0x20 */ -+ /**< @ref MMAL_PARAMETER_URI_T */ -+ MMAL_PARAMETER_DPF_FILE, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ENABLE_DPF_FILE, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_DPF_FAIL_IS_FATAL, -+ /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ -+ MMAL_PARAMETER_CAPTURE_MODE, -+ /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ -+ MMAL_PARAMETER_FOCUS_REGIONS, -+ /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ -+ MMAL_PARAMETER_INPUT_CROP, -+ /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ -+ MMAL_PARAMETER_SENSOR_INFORMATION, -+ /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ -+ MMAL_PARAMETER_FLASH_SELECT, -+ /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ -+ MMAL_PARAMETER_FIELD_OF_VIEW, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, -+ /**< @ref MMAL_PARAMETER_DRC_T */ -+ MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, -+ /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ -+ MMAL_PARAMETER_ALGORITHM_CONTROL, -+ /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_SHARPNESS, -+ /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_CONTRAST, -+ /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_BRIGHTNESS, -+ /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_SATURATION, -+ -+ /* 0x30 */ -+ /**< @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_ISO, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ANTISHAKE, -+ /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ -+ MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_CAMERA_BURST_CAPTURE, -+ /** @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_CAMERA_MIN_ISO, -+ /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ -+ MMAL_PARAMETER_CAMERA_USE_CASE, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_CAPTURE_STATS_PASS, -+ /** @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ENABLE_REGISTER_FILE, -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL, -+ /** @ref MMAL_PARAMETER_CONFIGFILE_T */ -+ MMAL_PARAMETER_CONFIGFILE_REGISTERS, -+ /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ -+ MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_JPEG_ATTACH_LOG, -+ /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ -+ MMAL_PARAMETER_ZERO_SHUTTER_LAG, -+ /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ -+ MMAL_PARAMETER_FPS_RANGE, -+ /**< @ref MMAL_PARAMETER_INT32_T */ -+ MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, -+ -+ /* 0x40 */ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_SW_SHARPEN_DISABLE, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_FLASH_REQUIRED, -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_SW_SATURATION_DISABLE, -+ /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_SHUTTER_SPEED, -+ /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ -+ MMAL_PARAMETER_CUSTOM_AWB_GAINS, -+}; -+ -+struct mmal_parameter_rational { -+ s32 num; /**< Numerator */ -+ s32 den; /**< Denominator */ -+}; -+ -+enum mmal_parameter_camera_config_timestamp_mode { -+ MMAL_PARAM_TIMESTAMP_MODE_ZERO = 0, /* Always timestamp frames as 0 */ -+ MMAL_PARAM_TIMESTAMP_MODE_RAW_STC, /* Use the raw STC value -+ * for the frame timestamp -+ */ -+ MMAL_PARAM_TIMESTAMP_MODE_RESET_STC, /* Use the STC timestamp -+ * but subtract the -+ * timestamp of the first -+ * frame sent to give a -+ * zero based timestamp. -+ */ -+}; -+ -+struct mmal_parameter_fps_range { -+ /**< Low end of the permitted framerate range */ -+ struct mmal_parameter_rational fps_low; -+ /**< High end of the permitted framerate range */ -+ struct mmal_parameter_rational fps_high; -+}; -+ -+/* camera configuration parameter */ -+struct mmal_parameter_camera_config { -+ /* Parameters for setting up the image pools */ -+ u32 max_stills_w; /* Max size of stills capture */ -+ u32 max_stills_h; -+ u32 stills_yuv422; /* Allow YUV422 stills capture */ -+ u32 one_shot_stills; /* Continuous or one shot stills captures. */ -+ -+ u32 max_preview_video_w; /* Max size of the preview or video -+ * capture frames -+ */ -+ u32 max_preview_video_h; -+ u32 num_preview_video_frames; -+ -+ /** Sets the height of the circular buffer for stills capture. */ -+ u32 stills_capture_circular_buffer_height; -+ -+ /** Allows preview/encode to resume as fast as possible after the stills -+ * input frame has been received, and then processes the still frame in -+ * the background whilst preview/encode has resumed. -+ * Actual mode is controlled by MMAL_PARAMETER_CAPTURE_MODE. -+ */ -+ u32 fast_preview_resume; -+ -+ /** Selects algorithm for timestamping frames if -+ * there is no clock component connected. -+ * enum mmal_parameter_camera_config_timestamp_mode -+ */ -+ s32 use_stc_timestamp; -+}; -+ -+enum mmal_parameter_exposuremode { -+ MMAL_PARAM_EXPOSUREMODE_OFF, -+ MMAL_PARAM_EXPOSUREMODE_AUTO, -+ MMAL_PARAM_EXPOSUREMODE_NIGHT, -+ MMAL_PARAM_EXPOSUREMODE_NIGHTPREVIEW, -+ MMAL_PARAM_EXPOSUREMODE_BACKLIGHT, -+ MMAL_PARAM_EXPOSUREMODE_SPOTLIGHT, -+ MMAL_PARAM_EXPOSUREMODE_SPORTS, -+ MMAL_PARAM_EXPOSUREMODE_SNOW, -+ MMAL_PARAM_EXPOSUREMODE_BEACH, -+ MMAL_PARAM_EXPOSUREMODE_VERYLONG, -+ MMAL_PARAM_EXPOSUREMODE_FIXEDFPS, -+ MMAL_PARAM_EXPOSUREMODE_ANTISHAKE, -+ MMAL_PARAM_EXPOSUREMODE_FIREWORKS, -+}; -+ -+enum mmal_parameter_exposuremeteringmode { -+ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE, -+ MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT, -+ MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT, -+ MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX, -+}; -+ -+enum mmal_parameter_awbmode { -+ MMAL_PARAM_AWBMODE_OFF, -+ MMAL_PARAM_AWBMODE_AUTO, -+ MMAL_PARAM_AWBMODE_SUNLIGHT, -+ MMAL_PARAM_AWBMODE_CLOUDY, -+ MMAL_PARAM_AWBMODE_SHADE, -+ MMAL_PARAM_AWBMODE_TUNGSTEN, -+ MMAL_PARAM_AWBMODE_FLUORESCENT, -+ MMAL_PARAM_AWBMODE_INCANDESCENT, -+ MMAL_PARAM_AWBMODE_FLASH, -+ MMAL_PARAM_AWBMODE_HORIZON, -+}; -+ -+enum mmal_parameter_imagefx { -+ MMAL_PARAM_IMAGEFX_NONE, -+ MMAL_PARAM_IMAGEFX_NEGATIVE, -+ MMAL_PARAM_IMAGEFX_SOLARIZE, -+ MMAL_PARAM_IMAGEFX_POSTERIZE, -+ MMAL_PARAM_IMAGEFX_WHITEBOARD, -+ MMAL_PARAM_IMAGEFX_BLACKBOARD, -+ MMAL_PARAM_IMAGEFX_SKETCH, -+ MMAL_PARAM_IMAGEFX_DENOISE, -+ MMAL_PARAM_IMAGEFX_EMBOSS, -+ MMAL_PARAM_IMAGEFX_OILPAINT, -+ MMAL_PARAM_IMAGEFX_HATCH, -+ MMAL_PARAM_IMAGEFX_GPEN, -+ MMAL_PARAM_IMAGEFX_PASTEL, -+ MMAL_PARAM_IMAGEFX_WATERCOLOUR, -+ MMAL_PARAM_IMAGEFX_FILM, -+ MMAL_PARAM_IMAGEFX_BLUR, -+ MMAL_PARAM_IMAGEFX_SATURATION, -+ MMAL_PARAM_IMAGEFX_COLOURSWAP, -+ MMAL_PARAM_IMAGEFX_WASHEDOUT, -+ MMAL_PARAM_IMAGEFX_POSTERISE, -+ MMAL_PARAM_IMAGEFX_COLOURPOINT, -+ MMAL_PARAM_IMAGEFX_COLOURBALANCE, -+ MMAL_PARAM_IMAGEFX_CARTOON, -+}; -+ -+enum MMAL_PARAM_FLICKERAVOID_T { -+ MMAL_PARAM_FLICKERAVOID_OFF, -+ MMAL_PARAM_FLICKERAVOID_AUTO, -+ MMAL_PARAM_FLICKERAVOID_50HZ, -+ MMAL_PARAM_FLICKERAVOID_60HZ, -+ MMAL_PARAM_FLICKERAVOID_MAX = 0x7FFFFFFF -+}; -+ -+struct mmal_parameter_awbgains { -+ struct mmal_parameter_rational r_gain; /**< Red gain */ -+ struct mmal_parameter_rational b_gain; /**< Blue gain */ -+}; -+ -+/** Manner of video rate control */ -+enum mmal_parameter_rate_control_mode { -+ MMAL_VIDEO_RATECONTROL_DEFAULT, -+ MMAL_VIDEO_RATECONTROL_VARIABLE, -+ MMAL_VIDEO_RATECONTROL_CONSTANT, -+ MMAL_VIDEO_RATECONTROL_VARIABLE_SKIP_FRAMES, -+ MMAL_VIDEO_RATECONTROL_CONSTANT_SKIP_FRAMES -+}; -+ -+enum mmal_video_profile { -+ MMAL_VIDEO_PROFILE_H263_BASELINE, -+ MMAL_VIDEO_PROFILE_H263_H320CODING, -+ MMAL_VIDEO_PROFILE_H263_BACKWARDCOMPATIBLE, -+ MMAL_VIDEO_PROFILE_H263_ISWV2, -+ MMAL_VIDEO_PROFILE_H263_ISWV3, -+ MMAL_VIDEO_PROFILE_H263_HIGHCOMPRESSION, -+ MMAL_VIDEO_PROFILE_H263_INTERNET, -+ MMAL_VIDEO_PROFILE_H263_INTERLACE, -+ MMAL_VIDEO_PROFILE_H263_HIGHLATENCY, -+ MMAL_VIDEO_PROFILE_MP4V_SIMPLE, -+ MMAL_VIDEO_PROFILE_MP4V_SIMPLESCALABLE, -+ MMAL_VIDEO_PROFILE_MP4V_CORE, -+ MMAL_VIDEO_PROFILE_MP4V_MAIN, -+ MMAL_VIDEO_PROFILE_MP4V_NBIT, -+ MMAL_VIDEO_PROFILE_MP4V_SCALABLETEXTURE, -+ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFACE, -+ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFBA, -+ MMAL_VIDEO_PROFILE_MP4V_BASICANIMATED, -+ MMAL_VIDEO_PROFILE_MP4V_HYBRID, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDREALTIME, -+ MMAL_VIDEO_PROFILE_MP4V_CORESCALABLE, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCODING, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCORE, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSCALABLE, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSIMPLE, -+ MMAL_VIDEO_PROFILE_H264_BASELINE, -+ MMAL_VIDEO_PROFILE_H264_MAIN, -+ MMAL_VIDEO_PROFILE_H264_EXTENDED, -+ MMAL_VIDEO_PROFILE_H264_HIGH, -+ MMAL_VIDEO_PROFILE_H264_HIGH10, -+ MMAL_VIDEO_PROFILE_H264_HIGH422, -+ MMAL_VIDEO_PROFILE_H264_HIGH444, -+ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE, -+ MMAL_VIDEO_PROFILE_DUMMY = 0x7FFFFFFF -+}; -+ -+enum mmal_video_level { -+ MMAL_VIDEO_LEVEL_H263_10, -+ MMAL_VIDEO_LEVEL_H263_20, -+ MMAL_VIDEO_LEVEL_H263_30, -+ MMAL_VIDEO_LEVEL_H263_40, -+ MMAL_VIDEO_LEVEL_H263_45, -+ MMAL_VIDEO_LEVEL_H263_50, -+ MMAL_VIDEO_LEVEL_H263_60, -+ MMAL_VIDEO_LEVEL_H263_70, -+ MMAL_VIDEO_LEVEL_MP4V_0, -+ MMAL_VIDEO_LEVEL_MP4V_0b, -+ MMAL_VIDEO_LEVEL_MP4V_1, -+ MMAL_VIDEO_LEVEL_MP4V_2, -+ MMAL_VIDEO_LEVEL_MP4V_3, -+ MMAL_VIDEO_LEVEL_MP4V_4, -+ MMAL_VIDEO_LEVEL_MP4V_4a, -+ MMAL_VIDEO_LEVEL_MP4V_5, -+ MMAL_VIDEO_LEVEL_MP4V_6, -+ MMAL_VIDEO_LEVEL_H264_1, -+ MMAL_VIDEO_LEVEL_H264_1b, -+ MMAL_VIDEO_LEVEL_H264_11, -+ MMAL_VIDEO_LEVEL_H264_12, -+ MMAL_VIDEO_LEVEL_H264_13, -+ MMAL_VIDEO_LEVEL_H264_2, -+ MMAL_VIDEO_LEVEL_H264_21, -+ MMAL_VIDEO_LEVEL_H264_22, -+ MMAL_VIDEO_LEVEL_H264_3, -+ MMAL_VIDEO_LEVEL_H264_31, -+ MMAL_VIDEO_LEVEL_H264_32, -+ MMAL_VIDEO_LEVEL_H264_4, -+ MMAL_VIDEO_LEVEL_H264_41, -+ MMAL_VIDEO_LEVEL_H264_42, -+ MMAL_VIDEO_LEVEL_H264_5, -+ MMAL_VIDEO_LEVEL_H264_51, -+ MMAL_VIDEO_LEVEL_DUMMY = 0x7FFFFFFF -+}; -+ -+struct mmal_parameter_video_profile { -+ enum mmal_video_profile profile; -+ enum mmal_video_level level; -+}; -+ -+/* video parameters */ -+ -+enum mmal_parameter_video_type { -+ /** @ref MMAL_DISPLAYREGION_T */ -+ MMAL_PARAMETER_DISPLAYREGION = MMAL_PARAMETER_GROUP_VIDEO, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ -+ MMAL_PARAMETER_SUPPORTED_PROFILES, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ -+ MMAL_PARAMETER_PROFILE, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_INTRAPERIOD, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_RATECONTROL_T */ -+ MMAL_PARAMETER_RATECONTROL, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_NALUNITFORMAT_T */ -+ MMAL_PARAMETER_NALUNITFORMAT, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_MINIMISE_FRAGMENTATION, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. -+ * Setting the value to zero resets to the default (one slice per -+ * frame). -+ */ -+ MMAL_PARAMETER_MB_ROWS_PER_SLICE, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION_T */ -+ MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_EEDE_ENABLE_T */ -+ MMAL_PARAMETER_VIDEO_EEDE_ENABLE, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE_T */ -+ MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. Request an I-frame. */ -+ MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME, -+ /** @ref MMAL_PARAMETER_VIDEO_INTRA_REFRESH_T */ -+ MMAL_PARAMETER_VIDEO_INTRA_REFRESH, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. Run-time bit rate control */ -+ MMAL_PARAMETER_VIDEO_BIT_RATE, -+ -+ /** @ref MMAL_PARAMETER_FRAME_RATE_T */ -+ MMAL_PARAMETER_VIDEO_FRAME_RATE, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_MIN_QUANT, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_MAX_QUANT, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL, -+ -+ MMAL_PARAMETER_EXTRA_BUFFERS, /**< @ref MMAL_PARAMETER_UINT32_T. */ -+ /** @ref MMAL_PARAMETER_UINT32_T. -+ * Changing this parameter from the default can reduce frame rate -+ * because image buffers need to be re-pitched. -+ */ -+ MMAL_PARAMETER_VIDEO_ALIGN_HORIZ, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. -+ * Changing this parameter from the default can reduce frame rate -+ * because image buffers need to be re-pitched. -+ */ -+ MMAL_PARAMETER_VIDEO_ALIGN_VERT, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAMES, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_INITIAL_QUANT, -+ -+ /**< @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_QP_P, -+ -+ /**< @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_RC_SLICE_DQUANT, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_FRAME_LIMIT_BITS, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_PEAK_RATE, -+ -+ /* H264 specific parameters */ -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_DISABLE_CABAC, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_LATENCY, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_AU_DELIMITERS, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_DEBLOCK_IDC, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_ENCODER_H264_MB_INTRA_MODES_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_MB_INTRA_MODE, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_HEADER_ON_OPEN, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_PRECODE_FOR_QP, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_DRM_INIT_INFO_T. */ -+ MMAL_PARAMETER_VIDEO_DRM_INIT_INFO, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_TIMESTAMP_FIFO, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_DECODE_ERROR_CONCEALMENT, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER_T. */ -+ MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER, -+ -+ /** @ref MMAL_PARAMETER_BYTES_T */ -+ MMAL_PARAMETER_VIDEO_DECODE_CONFIG_VD3, -+ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_VCL_HRD_PARAMETERS, -+ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG, -+ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER -+}; -+ -+/** Valid mirror modes */ -+enum mmal_parameter_mirror { -+ MMAL_PARAM_MIRROR_NONE, -+ MMAL_PARAM_MIRROR_VERTICAL, -+ MMAL_PARAM_MIRROR_HORIZONTAL, -+ MMAL_PARAM_MIRROR_BOTH, -+}; -+ -+enum mmal_parameter_displaytransform { -+ MMAL_DISPLAY_ROT0 = 0, -+ MMAL_DISPLAY_MIRROR_ROT0 = 1, -+ MMAL_DISPLAY_MIRROR_ROT180 = 2, -+ MMAL_DISPLAY_ROT180 = 3, -+ MMAL_DISPLAY_MIRROR_ROT90 = 4, -+ MMAL_DISPLAY_ROT270 = 5, -+ MMAL_DISPLAY_ROT90 = 6, -+ MMAL_DISPLAY_MIRROR_ROT270 = 7, -+}; -+ -+enum mmal_parameter_displaymode { -+ MMAL_DISPLAY_MODE_FILL = 0, -+ MMAL_DISPLAY_MODE_LETTERBOX = 1, -+}; -+ -+enum mmal_parameter_displayset { -+ MMAL_DISPLAY_SET_NONE = 0, -+ MMAL_DISPLAY_SET_NUM = 1, -+ MMAL_DISPLAY_SET_FULLSCREEN = 2, -+ MMAL_DISPLAY_SET_TRANSFORM = 4, -+ MMAL_DISPLAY_SET_DEST_RECT = 8, -+ MMAL_DISPLAY_SET_SRC_RECT = 0x10, -+ MMAL_DISPLAY_SET_MODE = 0x20, -+ MMAL_DISPLAY_SET_PIXEL = 0x40, -+ MMAL_DISPLAY_SET_NOASPECT = 0x80, -+ MMAL_DISPLAY_SET_LAYER = 0x100, -+ MMAL_DISPLAY_SET_COPYPROTECT = 0x200, -+ MMAL_DISPLAY_SET_ALPHA = 0x400, -+}; -+ -+/* rectangle, used lots so it gets its own struct */ -+struct vchiq_mmal_rect { -+ s32 x; -+ s32 y; -+ s32 width; -+ s32 height; -+}; -+ -+struct mmal_parameter_displayregion { -+ /** Bitfield that indicates which fields are set and should be -+ * used. All other fields will maintain their current value. -+ * \ref MMAL_DISPLAYSET_T defines the bits that can be -+ * combined. -+ */ -+ u32 set; -+ -+ /** Describes the display output device, with 0 typically -+ * being a directly connected LCD display. The actual values -+ * will depend on the hardware. Code using hard-wired numbers -+ * (e.g. 2) is certain to fail. -+ */ -+ -+ u32 display_num; -+ /** Indicates that we are using the full device screen area, -+ * rather than a window of the display. If zero, then -+ * dest_rect is used to specify a region of the display to -+ * use. -+ */ -+ -+ s32 fullscreen; -+ /** Indicates any rotation or flipping used to map frames onto -+ * the natural display orientation. -+ */ -+ u32 transform; /* enum mmal_parameter_displaytransform */ -+ -+ /** Where to display the frame within the screen, if -+ * fullscreen is zero. -+ */ -+ struct vchiq_mmal_rect dest_rect; -+ -+ /** Indicates which area of the frame to display. If all -+ * values are zero, the whole frame will be used. -+ */ -+ struct vchiq_mmal_rect src_rect; -+ -+ /** If set to non-zero, indicates that any display scaling -+ * should disregard the aspect ratio of the frame region being -+ * displayed. -+ */ -+ s32 noaspect; -+ -+ /** Indicates how the image should be scaled to fit the -+ * display. \code MMAL_DISPLAY_MODE_FILL \endcode indicates -+ * that the image should fill the screen by potentially -+ * cropping the frames. Setting \code mode \endcode to \code -+ * MMAL_DISPLAY_MODE_LETTERBOX \endcode indicates that all the -+ * source region should be displayed and black bars added if -+ * necessary. -+ */ -+ u32 mode; /* enum mmal_parameter_displaymode */ -+ -+ /** If non-zero, defines the width of a source pixel relative -+ * to \code pixel_y \endcode. If zero, then pixels default to -+ * being square. -+ */ -+ u32 pixel_x; -+ -+ /** If non-zero, defines the height of a source pixel relative -+ * to \code pixel_x \endcode. If zero, then pixels default to -+ * being square. -+ */ -+ u32 pixel_y; -+ -+ /** Sets the relative depth of the images, with greater values -+ * being in front of smaller values. -+ */ -+ u32 layer; -+ -+ /** Set to non-zero to ensure copy protection is used on -+ * output. -+ */ -+ s32 copyprotect_required; -+ -+ /** Level of opacity of the layer, where zero is fully -+ * transparent and 255 is fully opaque. -+ */ -+ u32 alpha; -+}; -+ -+#define MMAL_MAX_IMAGEFX_PARAMETERS 5 -+ -+struct mmal_parameter_imagefx_parameters { -+ enum mmal_parameter_imagefx effect; -+ u32 num_effect_params; -+ u32 effect_parameter[MMAL_MAX_IMAGEFX_PARAMETERS]; -+}; -+ -+#define MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS 4 -+#define MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES 2 -+#define MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN 16 -+ -+struct mmal_parameter_camera_info_camera_t { -+ u32 port_id; -+ u32 max_width; -+ u32 max_height; -+ u32 lens_present; -+ u8 camera_name[MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN]; -+}; -+ -+enum mmal_parameter_camera_info_flash_type_t { -+ /* Make values explicit to ensure they match values in config ini */ -+ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_XENON = 0, -+ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_LED = 1, -+ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_OTHER = 2, -+ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_MAX = 0x7FFFFFFF -+}; -+ -+struct mmal_parameter_camera_info_flash_t { -+ enum mmal_parameter_camera_info_flash_type_t flash_type; -+}; -+ -+struct mmal_parameter_camera_info_t { -+ u32 num_cameras; -+ u32 num_flashes; -+ struct mmal_parameter_camera_info_camera_t -+ cameras[MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS]; -+ struct mmal_parameter_camera_info_flash_t -+ flashes[MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES]; -+}; -+ -+#endif ---- /dev/null -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -@@ -0,0 +1,166 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * Authors: Vincent Sanders @ Collabora -+ * Dave Stevenson @ Broadcom -+ * (now dave.stevenson@raspberrypi.org) -+ * Simon Mellor @ Broadcom -+ * Luke Diamand @ Broadcom -+ * -+ * MMAL interface to VCHIQ message passing -+ */ -+ -+#ifndef MMAL_VCHIQ_H -+#define MMAL_VCHIQ_H -+ -+#include "mmal-msg-format.h" -+ -+#define MAX_PORT_COUNT 4 -+ -+/* Maximum size of the format extradata. */ -+#define MMAL_FORMAT_EXTRADATA_MAX_SIZE 128 -+ -+struct vchiq_mmal_instance; -+ -+enum vchiq_mmal_es_type { -+ MMAL_ES_TYPE_UNKNOWN, /**< Unknown elementary stream type */ -+ MMAL_ES_TYPE_CONTROL, /**< Elementary stream of control commands */ -+ MMAL_ES_TYPE_AUDIO, /**< Audio elementary stream */ -+ MMAL_ES_TYPE_VIDEO, /**< Video elementary stream */ -+ MMAL_ES_TYPE_SUBPICTURE /**< Sub-picture elementary stream */ -+}; -+ -+struct vchiq_mmal_port_buffer { -+ unsigned int num; /* number of buffers */ -+ u32 size; /* size of buffers */ -+ u32 alignment; /* alignment of buffers */ -+}; -+ -+struct vchiq_mmal_port; -+ -+typedef void (*vchiq_mmal_buffer_cb)( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ int status, struct mmal_buffer *buffer, -+ unsigned long length, u32 mmal_flags, s64 dts, s64 pts); -+ -+struct vchiq_mmal_port { -+ bool enabled; -+ u32 handle; -+ u32 type; /* port type, cached to use on port info set */ -+ u32 index; /* port index, cached to use on port info set */ -+ -+ /* component port belongs to, allows simple deref */ -+ struct vchiq_mmal_component *component; -+ -+ struct vchiq_mmal_port *connected; /* port conencted to */ -+ -+ /* buffer info */ -+ struct vchiq_mmal_port_buffer minimum_buffer; -+ struct vchiq_mmal_port_buffer recommended_buffer; -+ struct vchiq_mmal_port_buffer current_buffer; -+ -+ /* stream format */ -+ struct mmal_es_format_local format; -+ /* elementary stream format */ -+ union mmal_es_specific_format es; -+ -+ /* data buffers to fill */ -+ struct list_head buffers; -+ /* lock to serialise adding and removing buffers from list */ -+ spinlock_t slock; -+ -+ /* Count of buffers the VPU has yet to return */ -+ atomic_t buffers_with_vpu; -+ /* callback on buffer completion */ -+ vchiq_mmal_buffer_cb buffer_cb; -+ /* callback context */ -+ void *cb_ctx; -+}; -+ -+struct vchiq_mmal_component { -+ bool enabled; -+ u32 handle; /* VideoCore handle for component */ -+ u32 inputs; /* Number of input ports */ -+ u32 outputs; /* Number of output ports */ -+ u32 clocks; /* Number of clock ports */ -+ struct vchiq_mmal_port control; /* control port */ -+ struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */ -+ struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */ -+ struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */ -+}; -+ -+int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance); -+int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance); -+ -+/* Initialise a mmal component and its ports -+ * -+ */ -+int vchiq_mmal_component_init( -+ struct vchiq_mmal_instance *instance, -+ const char *name, -+ struct vchiq_mmal_component **component_out); -+ -+int vchiq_mmal_component_finalise( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component); -+ -+int vchiq_mmal_component_enable( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component); -+ -+int vchiq_mmal_component_disable( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component); -+ -+/* enable a mmal port -+ * -+ * enables a port and if a buffer callback provided enque buffer -+ * headers as appropriate for the port. -+ */ -+int vchiq_mmal_port_enable( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ vchiq_mmal_buffer_cb buffer_cb); -+ -+/* disable a port -+ * -+ * disable a port will dequeue any pending buffers -+ */ -+int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port); -+ -+int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter, -+ void *value, -+ u32 value_size); -+ -+int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter, -+ void *value, -+ u32 *value_size); -+ -+int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port); -+ -+int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *src, -+ struct vchiq_mmal_port *dst); -+ -+int vchiq_mmal_version(struct vchiq_mmal_instance *instance, -+ u32 *major_out, -+ u32 *minor_out); -+ -+int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ struct mmal_buffer *buf); -+ -+int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, -+ struct mmal_buffer *buf); -+int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf); -+#endif /* MMAL_VCHIQ_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0265-overlays-Update-README-with-removal-of-lirc-rpi.patch b/target/linux/brcm2708/patches-4.19/950-0265-overlays-Update-README-with-removal-of-lirc-rpi.patch new file mode 100644 index 0000000000..02162129b4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0265-overlays-Update-README-with-removal-of-lirc-rpi.patch @@ -0,0 +1,91 @@ +From f2c24ce7e03d059fa9f674d8ebf6286e8f0c38b6 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 5 Dec 2018 11:56:40 +0000 +Subject: [PATCH] overlays: Update README with removal of lirc-rpi + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 57 ++++++++++++------------------- + 1 file changed, 21 insertions(+), 36 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -56,23 +56,29 @@ have its contents deleted (or commented + Using Overlays + ============== + +-Overlays are loaded using the "dtoverlay" directive. As an example, consider +-the popular lirc-rpi module, the Linux Infrared Remote Control driver. In the +-pre-DT world this would be loaded from /etc/modules, with an explicit +-"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled, +-this becomes a line in config.txt: +- +- dtoverlay=lirc-rpi +- +-This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By +-default it will use GPIOs 17 (out) and 18 (in), but this can be modified using +-DT parameters: +- +- dtoverlay=lirc-rpi,gpio_out_pin=17,gpio_in_pin=13 +- +-Parameters always have default values, although in some cases (e.g. "w1-gpio") +-it is necessary to provided multiple overlays in order to get the desired +-behaviour. See the list of overlays below for a description of the parameters ++Overlays are loaded using the "dtoverlay" config.txt setting. As an example, ++consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded ++by writing a magic string comprising a device identifier and an I2C address to ++a special file in /sys/class/i2c-adapter, having first loaded the driver for ++the I2C interface and the RTC device - something like this: ++ ++ modprobe i2c-bcm2835 ++ modprobe rtc-ds1307 ++ echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device ++ ++With DT enabled, this becomes a line in config.txt: ++ ++ dtoverlay=i2c-rtc,ds1307 ++ ++This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node" ++describing the DS1307 I2C device to be added to the Device Tree for the Pi. By ++default it usees address 0x68, but this can be modified with an additional DT ++parameter: ++ ++ dtoverlay=i2c-rtc,ds1307,addr=0x68 ++ ++Parameters usually have default values, although certain parameters are ++mandatory. See the list of overlays below for a description of the parameters + and their defaults. + + The Overlay and Parameter Reference +@@ -1135,29 +1141,8 @@ Params: + + + Name: lirc-rpi +-Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi) +- Consult the module documentation for more details. +-Load: dtoverlay=lirc-rpi,= +-Params: gpio_out_pin GPIO for output (default "17") +- +- gpio_in_pin GPIO for input (default "18") +- +- gpio_in_pull Pull up/down/off on the input pin +- (default "down") +- +- sense Override the IR receive auto-detection logic: +- "0" = force active-high +- "1" = force active-low +- "-1" = use auto-detection +- (default "-1") +- +- softcarrier Turn the software carrier "on" or "off" +- (default "on") +- +- invert "on" = invert the output pin (default "off") +- +- debug "on" = enable additional debug messages +- (default "off") ++Info: This overlay has been deprecated and removed - see gpio-ir ++Load: + + + Name: ltc294x diff --git a/target/linux/brcm2708/patches-4.19/950-0265-staging-mmal-vchiq-Allocate-and-free-components-as-r.patch b/target/linux/brcm2708/patches-4.19/950-0265-staging-mmal-vchiq-Allocate-and-free-components-as-r.patch deleted file mode 100644 index ce0b682849..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0265-staging-mmal-vchiq-Allocate-and-free-components-as-r.patch +++ /dev/null @@ -1,107 +0,0 @@ -From f94642597f63c71b2ccffddd4f447190c131af56 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 24 Sep 2018 16:51:13 +0100 -Subject: [PATCH 265/806] staging: mmal-vchiq: Allocate and free components as - required - -The existing code assumed that there would only ever be 4 components, -and never freed the entries once used. -Allow arbitrary creation and destruction of components. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/vchiq-mmal/mmal-vchiq.c | 29 ++++++++++++------- - .../vc04_services/vchiq-mmal/mmal-vchiq.h | 1 + - 2 files changed, 20 insertions(+), 10 deletions(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -38,8 +38,11 @@ MODULE_AUTHOR("Dave Stevenson, vchiq_mutex)) - return -EINTR; - -- if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) { -+ for (idx = 0; idx < VCHIQ_MMAL_MAX_COMPONENTS; idx++) { -+ if (!instance->component[idx].in_use) { -+ component = &instance->component[idx]; -+ component->in_use = 1; -+ break; -+ } -+ } -+ -+ if (!component) { - ret = -EINVAL; /* todo is this correct error? */ - goto unlock; - } - -- component = &instance->component[instance->component_idx]; -- - ret = create_component(instance, component, name); - if (ret < 0) { - pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", -@@ -1694,8 +1701,6 @@ int vchiq_mmal_component_init(struct vch - goto release_component; - } - -- instance->component_idx++; -- - *component_out = component; - - mutex_unlock(&instance->vchiq_mutex); -@@ -1705,6 +1710,8 @@ int vchiq_mmal_component_init(struct vch - release_component: - destroy_component(instance, component); - unlock: -+ if (component) -+ component->in_use = 0; - mutex_unlock(&instance->vchiq_mutex); - - return ret; -@@ -1727,6 +1734,8 @@ int vchiq_mmal_component_finalise(struct - - ret = destroy_component(instance, component); - -+ component->in_use = 0; -+ - mutex_unlock(&instance->vchiq_mutex); - - return ret; ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -@@ -82,6 +82,7 @@ struct vchiq_mmal_port { - }; - - struct vchiq_mmal_component { -+ u32 in_use:1; - bool enabled; - u32 handle; /* VideoCore handle for component */ - u32 inputs; /* Number of input ports */ diff --git a/target/linux/brcm2708/patches-4.19/950-0266-staging-bcm2835-camera-Check-the-error-for-REPEAT_SE.patch b/target/linux/brcm2708/patches-4.19/950-0266-staging-bcm2835-camera-Check-the-error-for-REPEAT_SE.patch new file mode 100644 index 0000000000..40260a6573 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0266-staging-bcm2835-camera-Check-the-error-for-REPEAT_SE.patch @@ -0,0 +1,31 @@ +From 81f6d4e84fd127cf0b31c9822a2beb9b298aa7bb Mon Sep 17 00:00:00 2001 +From: 6by9 <6by9@users.noreply.github.com> +Date: Tue, 11 Dec 2018 15:18:02 +0000 +Subject: [PATCH] staging: bcm2835-camera: Check the error for + REPEAT_SEQ_HEADER (#2782) + +When handling for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER was added +the firmware would reject the setting if H264 hadn't already been +selected. This was fixed in the firmware at that point, but to +enable backwards compatibility the returned error was ignored. + +That was Dec 2013, so the chances of having a firmware that still +has that issue is so close to zero that the workaround can be +removed. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/bcm2835-camera/controls.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -1100,7 +1100,7 @@ static const struct bm2835_mmal_v4l2_ctr + 0, 1, NULL, + MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER, + &ctrl_set_video_encode_param_output, +- true /* Errors ignored as requires latest firmware to work */ ++ false + }, + { + V4L2_CID_MPEG_VIDEO_H264_PROFILE, diff --git a/target/linux/brcm2708/patches-4.19/950-0266-staging-mmal-vchiq-Avoid-use-of-bool-in-structures.patch b/target/linux/brcm2708/patches-4.19/950-0266-staging-mmal-vchiq-Avoid-use-of-bool-in-structures.patch deleted file mode 100644 index 6d2f7fd560..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0266-staging-mmal-vchiq-Avoid-use-of-bool-in-structures.patch +++ /dev/null @@ -1,93 +0,0 @@ -From 3789c3b08b56f471878c493fd80a2eee776b527c Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 29 Oct 2018 16:20:46 +0000 -Subject: [PATCH 266/806] staging: mmal-vchiq: Avoid use of bool in structures - -Fixes up a checkpatch error "Avoid using bool structure members -because of possible alignment issues". - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 14 +++++++------- - .../staging/vc04_services/vchiq-mmal/mmal-vchiq.h | 4 ++-- - 2 files changed, 9 insertions(+), 9 deletions(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -861,9 +861,9 @@ static int port_info_get(struct vchiq_mm - goto release_msg; - - if (rmsg->u.port_info_get_reply.port.is_enabled == 0) -- port->enabled = false; -+ port->enabled = 0; - else -- port->enabled = true; -+ port->enabled = 1; - - /* copy the values out of the message */ - port->handle = rmsg->u.port_info_get_reply.port_handle; -@@ -1300,7 +1300,7 @@ static int port_disable(struct vchiq_mma - if (!port->enabled) - return 0; - -- port->enabled = false; -+ port->enabled = 0; - - ret = port_action_port(instance, port, - MMAL_MSG_PORT_ACTION_TYPE_DISABLE); -@@ -1352,7 +1352,7 @@ static int port_enable(struct vchiq_mmal - if (ret) - goto done; - -- port->enabled = true; -+ port->enabled = 1; - - if (port->buffer_cb) { - /* send buffer headers to videocore */ -@@ -1524,7 +1524,7 @@ int vchiq_mmal_port_connect_tunnel(struc - pr_err("failed disconnecting src port\n"); - goto release_unlock; - } -- src->connected->enabled = false; -+ src->connected->enabled = 0; - src->connected = NULL; - } - -@@ -1760,7 +1760,7 @@ int vchiq_mmal_component_enable(struct v - - ret = enable_component(instance, component); - if (ret == 0) -- component->enabled = true; -+ component->enabled = 1; - - mutex_unlock(&instance->vchiq_mutex); - -@@ -1786,7 +1786,7 @@ int vchiq_mmal_component_disable(struct - - ret = disable_component(instance, component); - if (ret == 0) -- component->enabled = false; -+ component->enabled = 0; - - mutex_unlock(&instance->vchiq_mutex); - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -@@ -48,7 +48,7 @@ typedef void (*vchiq_mmal_buffer_cb)( - unsigned long length, u32 mmal_flags, s64 dts, s64 pts); - - struct vchiq_mmal_port { -- bool enabled; -+ u32 enabled:1; - u32 handle; - u32 type; /* port type, cached to use on port info set */ - u32 index; /* port index, cached to use on port info set */ -@@ -83,7 +83,7 @@ struct vchiq_mmal_port { - - struct vchiq_mmal_component { - u32 in_use:1; -- bool enabled; -+ u32 enabled:1; - u32 handle; /* VideoCore handle for component */ - u32 inputs; /* Number of input ports */ - u32 outputs; /* Number of output ports */ diff --git a/target/linux/brcm2708/patches-4.19/950-0267-gpio-ir-change-default-pull-configuration-to-up.patch b/target/linux/brcm2708/patches-4.19/950-0267-gpio-ir-change-default-pull-configuration-to-up.patch new file mode 100644 index 0000000000..40bfc01441 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0267-gpio-ir-change-default-pull-configuration-to-up.patch @@ -0,0 +1,47 @@ +From d1cf5fb57ee5ee4512a93614d67d15af9c8070b2 Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Wed, 9 Jan 2019 14:51:01 +0100 +Subject: [PATCH] gpio-ir: change default pull configuration to up + +IR receivers like the TSOP series from Vishay and compatible ones +have active-low open collector outputs with an internal pull up of +about 30k (according to the TSOP datasheets). + +Activating a pull-down resistor on the GPIO will make it work against +the pull-up in the IR receiver and brings the idle input voltage down +to about 1.9V (measured on a RPi3B+ with a TSOP4438). While that's +usually enough to make the RPi see a high signal it's certainly not +optimal and may even fail when using an IR receiver with a weaker pull-up. + +Switching the default GPIO pull to "up" results in an input voltage +level of about 3.3V and ensures that an idle state (high signal) will +be detected if no IR receiver is attached. + +Signed-off-by: Matthias Reichl +--- + arch/arm/boot/dts/overlays/README | 2 +- + arch/arm/boot/dts/overlays/gpio-ir-overlay.dts | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -611,7 +611,7 @@ Load: dtoverlay=gpio-ir,= + Params: gpio_pin Input pin number. Default is 18. + + gpio_pull Desired pull-up/down state (off, down, up) +- Default is "down". ++ Default is "up". + + rc-map-name Default rc keymap (can also be changed by + ir-keytable), defaults to "rc-rc6-mce" +--- a/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts +@@ -30,7 +30,7 @@ + gpio_ir_pins: gpio_ir_pins@12 { + brcm,pins = <18>; // pin 18 + brcm,function = <0>; // in +- brcm,pull = <1>; // down ++ brcm,pull = <2>; // up + }; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0267-staging-mmal-vchiq-Make-timeout-a-defined-parameter.patch b/target/linux/brcm2708/patches-4.19/950-0267-staging-mmal-vchiq-Make-timeout-a-defined-parameter.patch deleted file mode 100644 index b9d1699c72..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0267-staging-mmal-vchiq-Make-timeout-a-defined-parameter.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 301a6a16ec8a8b1a7b89c0cc6df30e79a460214a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 24 Sep 2018 16:57:09 +0100 -Subject: [PATCH 267/806] staging: mmal-vchiq: Make timeout a defined parameter - -The timeout period for VPU communications is a useful thing -to extend when debugging. -Set it via a define, rather than a magic number buried in the code. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -44,6 +44,12 @@ MODULE_VERSION("0.0.1"); - */ - #define VCHIQ_MMAL_MAX_COMPONENTS 64 - -+/* -+ * Timeout for synchronous msg responses in seconds. -+ * Helpful to increase this if stopping in the VPU debugger. -+ */ -+#define SYNC_MSG_TIMEOUT 3 -+ - /*#define FULL_MSG_DUMP 1*/ - - #ifdef DEBUG -@@ -692,7 +698,7 @@ static int send_synchronous_mmal_msg(str - } - - timeout = wait_for_completion_timeout(&msg_context->u.sync.cmplt, -- 3 * HZ); -+ SYNC_MSG_TIMEOUT * HZ); - if (timeout == 0) { - pr_err("timed out waiting for sync completion\n"); - ret = -ETIME; diff --git a/target/linux/brcm2708/patches-4.19/950-0268-firmware-raspberrypi-Report-the-fw-variant-during-pr.patch b/target/linux/brcm2708/patches-4.19/950-0268-firmware-raspberrypi-Report-the-fw-variant-during-pr.patch new file mode 100644 index 0000000000..a41e46b1e8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0268-firmware-raspberrypi-Report-the-fw-variant-during-pr.patch @@ -0,0 +1,79 @@ +From dfd66230d2d538e7f290436d2952124d6eadeb3d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 10 Jan 2019 17:58:06 +0000 +Subject: [PATCH] firmware: raspberrypi: Report the fw variant during + probe + +The driver already reported the firmware build date during probe. +The mailbox calls have been extended to also report the variant + 1 = standard start.elf + 2 = start_x.elf (includes camera stack) + 3 = start_db.elf (includes assert logging) + 4 = start_cd.elf (cutdown version for smallest memory footprint). +Log the variant during probe. + +Signed-off-by: Dave Stevenson +--- + drivers/firmware/raspberrypi.c | 32 +++++++++++++++++----- + include/soc/bcm2835/raspberrypi-firmware.h | 1 + + 2 files changed, 26 insertions(+), 7 deletions(-) + +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -227,21 +227,39 @@ static const struct attribute_group rpi_ + static void + rpi_firmware_print_firmware_revision(struct rpi_firmware *fw) + { ++ static const char * const variant_strs[] = { ++ "unknown", ++ "start", ++ "start_x", ++ "start_db", ++ "start_cd", ++ }; ++ const char *variant_str = "cmd unsupported"; + u32 packet; ++ u32 variant; ++ struct tm tm; + int ret = rpi_firmware_property(fw, + RPI_FIRMWARE_GET_FIRMWARE_REVISION, + &packet, sizeof(packet)); + +- if (ret == 0) { +- struct tm tm; ++ if (ret) ++ return; + +- time64_to_tm(packet, 0, &tm); ++ ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_FIRMWARE_VARIANT, ++ &variant, sizeof(variant)); + +- dev_info(fw->cl.dev, +- "Attached to firmware from %04ld-%02d-%02d %02d:%02d\n", +- tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, +- tm.tm_hour, tm.tm_min); ++ if (!ret) { ++ if (variant >= ARRAY_SIZE(variant_strs)) ++ variant = 0; ++ variant_str = variant_strs[variant]; + } ++ ++ time64_to_tm(packet, 0, &tm); ++ ++ dev_info(fw->cl.dev, ++ "Attached to firmware from %04ld-%02d-%02d %02d:%02d, variant %s\n", ++ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, ++ tm.tm_min, variant_str); + } + + static void +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -41,6 +41,7 @@ struct rpi_firmware_property_tag_header + enum rpi_firmware_property_tag { + RPI_FIRMWARE_PROPERTY_END = 0, + RPI_FIRMWARE_GET_FIRMWARE_REVISION = 0x00000001, ++ RPI_FIRMWARE_GET_FIRMWARE_VARIANT = 0x00000002, + + RPI_FIRMWARE_SET_CURSOR_INFO = 0x00008010, + RPI_FIRMWARE_SET_CURSOR_STATE = 0x00008011, diff --git a/target/linux/brcm2708/patches-4.19/950-0268-staging-mmal-vchiq-Make-a-mmal_buf-struct-for-passin.patch b/target/linux/brcm2708/patches-4.19/950-0268-staging-mmal-vchiq-Make-a-mmal_buf-struct-for-passin.patch deleted file mode 100644 index b3c8c2ad0e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0268-staging-mmal-vchiq-Make-a-mmal_buf-struct-for-passin.patch +++ /dev/null @@ -1,280 +0,0 @@ -From 862ee4fbd8c6b984f920b88908e33951e51134ca Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 24 Sep 2018 17:33:37 +0100 -Subject: [PATCH 268/806] staging: mmal-vchiq: Make a mmal_buf struct for - passing parameters - -The callback from vchi_mmal to the client was growing lots of extra -parameters. Consolidate them into a single struct instead of -growing the list further. -The struct is associated with the client buffer, therefore there -are various changes to setup various containers for the struct, -and pass the appropriate members. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/bcm2835-camera.c | 62 ++++++++++++------- - .../vc04_services/vchiq-mmal/mmal-common.h | 5 ++ - .../vc04_services/vchiq-mmal/mmal-vchiq.c | 29 ++++++--- - .../vc04_services/vchiq-mmal/mmal-vchiq.h | 3 +- - 4 files changed, 64 insertions(+), 35 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -72,6 +72,12 @@ static const struct v4l2_fract - tpf_max = {.numerator = 1, .denominator = FPS_MIN}, - tpf_default = {.numerator = 1000, .denominator = 30000}; - -+/* Container for MMAL and VB2 buffers*/ -+struct vb2_mmal_buffer { -+ struct vb2_v4l2_buffer vb; -+ struct mmal_buffer mmal; -+}; -+ - /* video formats */ - static struct mmal_fmt formats[] = { - { -@@ -267,14 +273,15 @@ static int buffer_init(struct vb2_buffer - { - struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); - struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); -- struct mmal_buffer *buf = container_of(vb2, struct mmal_buffer, vb); -+ struct vb2_mmal_buffer *buf = -+ container_of(vb2, struct vb2_mmal_buffer, vb); - - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p, vb %p\n", - __func__, dev, vb); -- buf->buffer = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); -- buf->buffer_size = vb2_plane_size(&buf->vb.vb2_buf, 0); -+ buf->mmal.buffer = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); -+ buf->mmal.buffer_size = vb2_plane_size(&buf->vb.vb2_buf, 0); - -- return mmal_vchi_buffer_init(dev->instance, buf); -+ return mmal_vchi_buffer_init(dev->instance, &buf->mmal); - } - - static int buffer_prepare(struct vb2_buffer *vb) -@@ -303,11 +310,13 @@ static void buffer_cleanup(struct vb2_bu - { - struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); - struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); -- struct mmal_buffer *buf = container_of(vb2, struct mmal_buffer, vb); -+ struct vb2_mmal_buffer *buf = -+ container_of(vb2, struct vb2_mmal_buffer, vb); - - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p, vb %p\n", - __func__, dev, vb); -- mmal_vchi_buffer_cleanup(buf); -+ -+ mmal_vchi_buffer_cleanup(&buf->mmal); - } - - static inline bool is_capturing(struct bm2835_mmal_dev *dev) -@@ -319,14 +328,16 @@ static inline bool is_capturing(struct b - static void buffer_cb(struct vchiq_mmal_instance *instance, - struct vchiq_mmal_port *port, - int status, -- struct mmal_buffer *buf, -- unsigned long length, u32 mmal_flags, s64 dts, s64 pts) -+ struct mmal_buffer *mmal_buf) - { - struct bm2835_mmal_dev *dev = port->cb_ctx; -+ struct vb2_mmal_buffer *buf = -+ container_of(mmal_buf, struct vb2_mmal_buffer, mmal); - - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "%s: status:%d, buf:%p, length:%lu, flags %u, pts %lld\n", -- __func__, status, buf, length, mmal_flags, pts); -+ __func__, status, buf, mmal_buf->length, mmal_buf->mmal_flags, -+ mmal_buf->pts); - - if (status != 0) { - /* error in transfer */ -@@ -337,7 +348,7 @@ static void buffer_cb(struct vchiq_mmal_ - return; - } - -- if (length == 0) { -+ if (mmal_buf->length == 0) { - /* stream ended */ - if (dev->capture.frame_count) { - /* empty buffer whilst capturing - expected to be an -@@ -353,7 +364,8 @@ static void buffer_cb(struct vchiq_mmal_ - &dev->capture.frame_count, - sizeof(dev->capture.frame_count)); - } -- if (vchiq_mmal_submit_buffer(instance, port, buf)) -+ if (vchiq_mmal_submit_buffer(instance, port, -+ &buf->mmal)) - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "Failed to return EOS buffer"); - } else { -@@ -382,16 +394,16 @@ static void buffer_cb(struct vchiq_mmal_ - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "Buffer time set as current time - %lld", - buf->vb.vb2_buf.timestamp); -- } else if (pts != 0) { -+ } else if (mmal_buf->pts != 0) { - ktime_t timestamp; -- s64 runtime_us = pts - -+ s64 runtime_us = mmal_buf->pts - - dev->capture.vc_start_timestamp; - timestamp = ktime_add_us(dev->capture.kernel_start_ts, - runtime_us); - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "Convert start time %llu and %llu with offset %llu to %llu\n", - ktime_to_ns(dev->capture.kernel_start_ts), -- dev->capture.vc_start_timestamp, pts, -+ dev->capture.vc_start_timestamp, mmal_buf->pts, - ktime_to_ns(timestamp)); - if (timestamp < dev->capture.last_timestamp) { - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -@@ -416,15 +428,15 @@ static void buffer_cb(struct vchiq_mmal_ - dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; - buf->vb.sequence = dev->capture.sequence++; - -- vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); -- if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) -+ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, mmal_buf->length); -+ if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) - buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; - - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "Buffer has ts %llu", dev->capture.last_timestamp); - vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); - -- if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && -+ if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && - is_capturing(dev)) { - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "Grab another frame as buffer has EOS"); -@@ -507,14 +519,16 @@ static void buffer_queue(struct vb2_buff - { - struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); - struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); -- struct mmal_buffer *buf = container_of(vb2, struct mmal_buffer, vb); -+ struct vb2_mmal_buffer *buf = -+ container_of(vb2, struct vb2_mmal_buffer, vb); - int ret; - - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "%s: dev:%p buf:%p, idx %u\n", - __func__, dev, buf, vb2->vb2_buf.index); - -- ret = vchiq_mmal_submit_buffer(dev->instance, dev->capture.port, buf); -+ ret = vchiq_mmal_submit_buffer(dev->instance, dev->capture.port, -+ &buf->mmal); - if (ret < 0) - v4l2_err(&dev->v4l2_dev, "%s: error submitting buffer\n", - __func__); -@@ -628,7 +642,7 @@ static void stop_streaming(struct vb2_qu - dev->capture.frame_count = 0; - - /* ensure a format has actually been set */ -- if (!dev->capture.port) { -+ if (!port) { - v4l2_err(&dev->v4l2_dev, - "no capture port - stream not started?\n"); - return; -@@ -648,11 +662,11 @@ static void stop_streaming(struct vb2_qu - - /* disable the connection from camera to encoder */ - ret = vchiq_mmal_port_disable(dev->instance, dev->capture.camera_port); -- if (!ret && dev->capture.camera_port != dev->capture.port) { -+ if (!ret && dev->capture.camera_port != port) { - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "disabling port\n"); -- ret = vchiq_mmal_port_disable(dev->instance, dev->capture.port); -- } else if (dev->capture.camera_port != dev->capture.port) { -+ ret = vchiq_mmal_port_disable(dev->instance, port); -+ } else if (dev->capture.camera_port != port) { - v4l2_err(&dev->v4l2_dev, "port_disable failed, error %d\n", - ret); - } -@@ -1954,7 +1968,7 @@ static int bcm2835_mmal_probe(struct pla - q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; - q->drv_priv = dev; -- q->buf_struct_size = sizeof(struct mmal_buffer); -+ q->buf_struct_size = sizeof(struct vb2_mmal_buffer); - q->ops = &bm2835_mmal_video_qops; - q->mem_ops = &vb2_vmalloc_memops; - q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h -@@ -50,6 +50,11 @@ struct mmal_buffer { - unsigned long buffer_size; /* size of allocated buffer */ - - struct mmal_msg_context *msg_context; -+ -+ unsigned long length; -+ u32 mmal_flags; -+ s64 dts; -+ s64 pts; - }; - - /* */ ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -259,17 +259,25 @@ static void buffer_work_cb(struct work_s - { - struct mmal_msg_context *msg_context = - container_of(work, struct mmal_msg_context, u.bulk.work); -+ struct mmal_buffer *buffer = msg_context->u.bulk.buffer; -+ -+ if (!buffer) { -+ pr_err("%s: ctx: %p, No mmal buffer to pass details\n", -+ __func__, msg_context); -+ return; -+ } -+ -+ buffer->length = msg_context->u.bulk.buffer_used; -+ buffer->mmal_flags = msg_context->u.bulk.mmal_flags; -+ buffer->dts = msg_context->u.bulk.dts; -+ buffer->pts = msg_context->u.bulk.pts; - - atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); - - msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, - msg_context->u.bulk.port, - msg_context->u.bulk.status, -- msg_context->u.bulk.buffer, -- msg_context->u.bulk.buffer_used, -- msg_context->u.bulk.mmal_flags, -- msg_context->u.bulk.dts, -- msg_context->u.bulk.pts); -+ msg_context->u.bulk.buffer); - } - - /* workqueue scheduled callback to handle receiving buffers -@@ -1327,11 +1335,14 @@ static int port_disable(struct vchiq_mma - mmalbuf = list_entry(buf_head, struct mmal_buffer, - list); - list_del(buf_head); -- if (port->buffer_cb) -+ if (port->buffer_cb) { -+ mmalbuf->length = 0; -+ mmalbuf->mmal_flags = 0; -+ mmalbuf->dts = MMAL_TIME_UNKNOWN; -+ mmalbuf->pts = MMAL_TIME_UNKNOWN; - port->buffer_cb(instance, -- port, 0, mmalbuf, 0, 0, -- MMAL_TIME_UNKNOWN, -- MMAL_TIME_UNKNOWN); -+ port, 0, mmalbuf); -+ } - } - - spin_unlock_irqrestore(&port->slock, flags); ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -@@ -44,8 +44,7 @@ struct vchiq_mmal_port; - typedef void (*vchiq_mmal_buffer_cb)( - struct vchiq_mmal_instance *instance, - struct vchiq_mmal_port *port, -- int status, struct mmal_buffer *buffer, -- unsigned long length, u32 mmal_flags, s64 dts, s64 pts); -+ int status, struct mmal_buffer *buffer); - - struct vchiq_mmal_port { - u32 enabled:1; diff --git a/target/linux/brcm2708/patches-4.19/950-0269-firmware-raspberrypi-Report-the-fw-git-hash-during-p.patch b/target/linux/brcm2708/patches-4.19/950-0269-firmware-raspberrypi-Report-the-fw-git-hash-during-p.patch new file mode 100644 index 0000000000..84d8a89659 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0269-firmware-raspberrypi-Report-the-fw-git-hash-during-p.patch @@ -0,0 +1,58 @@ +From 9abde0ff52268580501b3120629f3c92f0e5d589 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 10 Jan 2019 18:48:54 +0000 +Subject: [PATCH] firmware: raspberrypi: Report the fw git hash during + probe + +The firmware can now report the git hash from which it was built +via the mailbox, so report it during probe. + +Signed-off-by: Dave Stevenson +--- + drivers/firmware/raspberrypi.c | 17 +++++++++++++++++ + include/soc/bcm2835/raspberrypi-firmware.h | 1 + + 2 files changed, 18 insertions(+) + +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -263,6 +263,22 @@ rpi_firmware_print_firmware_revision(str + } + + static void ++rpi_firmware_print_firmware_hash(struct rpi_firmware *fw) ++{ ++ u32 hash[5]; ++ int ret = rpi_firmware_property(fw, ++ RPI_FIRMWARE_GET_FIRMWARE_HASH, ++ hash, sizeof(hash)); ++ ++ if (ret) ++ return; ++ ++ dev_info(fw->cl.dev, ++ "Firmware hash is %08x%08x%08x%08x%08x\n", ++ hash[0], hash[1], hash[2], hash[3], hash[4]); ++} ++ ++static void + rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw) + { + u32 packet; +@@ -308,6 +324,7 @@ static int rpi_firmware_probe(struct pla + g_pdev = pdev; + + rpi_firmware_print_firmware_revision(fw); ++ rpi_firmware_print_firmware_hash(fw); + rpi_register_hwmon_driver(dev, fw); + + return 0; +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -42,6 +42,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_PROPERTY_END = 0, + RPI_FIRMWARE_GET_FIRMWARE_REVISION = 0x00000001, + RPI_FIRMWARE_GET_FIRMWARE_VARIANT = 0x00000002, ++ RPI_FIRMWARE_GET_FIRMWARE_HASH = 0x00000003, + + RPI_FIRMWARE_SET_CURSOR_INFO = 0x00008010, + RPI_FIRMWARE_SET_CURSOR_STATE = 0x00008011, diff --git a/target/linux/brcm2708/patches-4.19/950-0269-staging-mmal-vchiq-Add-support-for-event-callbacks.patch b/target/linux/brcm2708/patches-4.19/950-0269-staging-mmal-vchiq-Add-support-for-event-callbacks.patch deleted file mode 100644 index 00b85e4388..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0269-staging-mmal-vchiq-Add-support-for-event-callbacks.patch +++ /dev/null @@ -1,356 +0,0 @@ -From adab474d1f91594d6d96d44054586ba36d7f26d4 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 24 Sep 2018 18:15:38 +0100 -Subject: [PATCH 269/806] staging: mmal-vchiq: Add support for event callbacks. - -(Preparation for the codec driver). -The codec uses the event mechanism to report things such as -resolution changes. It is signalled by the cmd field of the buffer -being non-zero. - -Add support for passing this information out to the client. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/vchiq-mmal/mmal-common.h | 1 + - .../vc04_services/vchiq-mmal/mmal-msg.h | 35 ++++ - .../vc04_services/vchiq-mmal/mmal-vchiq.c | 170 ++++++++++++++++-- - .../vc04_services/vchiq-mmal/mmal-vchiq.h | 4 + - 4 files changed, 196 insertions(+), 14 deletions(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h -@@ -51,6 +51,7 @@ struct mmal_buffer { - - struct mmal_msg_context *msg_context; - -+ u32 cmd; /* MMAL command. 0=data. */ - unsigned long length; - u32 mmal_flags; - s64 dts; ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h -@@ -346,6 +346,41 @@ struct mmal_msg_port_parameter_get_reply - /* event messages */ - #define MMAL_WORKER_EVENT_SPACE 256 - -+/* Four CC's for events */ -+#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) -+ -+#define MMAL_EVENT_ERROR MMAL_FOURCC('E', 'R', 'R', 'O') -+#define MMAL_EVENT_EOS MMAL_FOURCC('E', 'E', 'O', 'S') -+#define MMAL_EVENT_FORMAT_CHANGED MMAL_FOURCC('E', 'F', 'C', 'H') -+#define MMAL_EVENT_PARAMETER_CHANGED MMAL_FOURCC('E', 'P', 'C', 'H') -+ -+/* Structs for each of the event message payloads */ -+struct mmal_msg_event_eos { -+ u32 port_type; /**< Type of port that received the end of stream */ -+ u32 port_index; /**< Index of port that received the end of stream */ -+}; -+ -+/** Format changed event data. */ -+struct mmal_msg_event_format_changed { -+ /* Minimum size of buffers the port requires */ -+ u32 buffer_size_min; -+ /* Minimum number of buffers the port requires */ -+ u32 buffer_num_min; -+ /* Size of buffers the port recommends for optimal performance. -+ * A value of zero means no special recommendation. -+ */ -+ u32 buffer_size_recommended; -+ /* Number of buffers the port recommends for optimal -+ * performance. A value of zero means no special recommendation. -+ */ -+ u32 buffer_num_recommended; -+ -+ u32 es_ptr; -+ struct mmal_es_format format; -+ union mmal_es_specific_format es; -+ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; -+}; -+ - struct mmal_msg_event_to_host { - u32 client_component; /* component context */ - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -151,6 +151,8 @@ struct mmal_msg_context { - /* Presentation and Decode timestamps */ - s64 pts; - s64 dts; -+ /* MMAL buffer command flag */ -+ u32 cmd; - - int status; /* context status */ - -@@ -238,18 +240,6 @@ release_msg_context(struct mmal_msg_cont - kfree(msg_context); - } - --/* deals with receipt of event to host message */ --static void event_to_host_cb(struct vchiq_mmal_instance *instance, -- struct mmal_msg *msg, u32 msg_len) --{ -- pr_debug("unhandled event\n"); -- pr_debug("component:%u port type:%d num:%d cmd:0x%x length:%d\n", -- msg->u.event_to_host.client_component, -- msg->u.event_to_host.port_type, -- msg->u.event_to_host.port_num, -- msg->u.event_to_host.cmd, msg->u.event_to_host.length); --} -- - /* workqueue scheduled callback - * - * we do this because it is important we do not call any other vchiq -@@ -271,13 +261,18 @@ static void buffer_work_cb(struct work_s - buffer->mmal_flags = msg_context->u.bulk.mmal_flags; - buffer->dts = msg_context->u.bulk.dts; - buffer->pts = msg_context->u.bulk.pts; -+ buffer->cmd = msg_context->u.bulk.cmd; - -- atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); -+ if (!buffer->cmd) -+ atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu); - - msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, - msg_context->u.bulk.port, - msg_context->u.bulk.status, - msg_context->u.bulk.buffer); -+ -+ if (buffer->cmd) -+ mutex_unlock(&msg_context->u.bulk.port->event_context_mutex); - } - - /* workqueue scheduled callback to handle receiving buffers -@@ -356,6 +351,7 @@ static int bulk_receive(struct vchiq_mma - msg_context->u.bulk.buffer_used = rd_len; - msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; - msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; -+ msg_context->u.bulk.cmd = msg->u.buffer_from_host.buffer_header.cmd; - - queue_work(msg_context->instance->bulk_wq, - &msg_context->u.bulk.buffer_to_host_work); -@@ -457,6 +453,103 @@ buffer_from_host(struct vchiq_mmal_insta - return ret; - } - -+/* deals with receipt of event to host message */ -+static void event_to_host_cb(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, u32 msg_len) -+{ -+ /* FIXME: Not going to work on 64 bit */ -+ struct vchiq_mmal_component *component = -+ (struct vchiq_mmal_component *)msg->u.event_to_host.client_component; -+ struct vchiq_mmal_port *port = NULL; -+ struct mmal_msg_context *msg_context; -+ u32 port_num = msg->u.event_to_host.port_num; -+ -+ if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) { -+ pr_err("%s: MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n", -+ __func__); -+ return; -+ } -+ -+ switch (msg->u.event_to_host.port_type) { -+ case MMAL_PORT_TYPE_CONTROL: -+ if (port_num) { -+ pr_err("%s: port_num of %u >= number of ports 1", -+ __func__, port_num); -+ return; -+ } -+ port = &component->control; -+ break; -+ case MMAL_PORT_TYPE_INPUT: -+ if (port_num >= component->inputs) { -+ pr_err("%s: port_num of %u >= number of ports %u", -+ __func__, port_num, -+ port_num >= component->inputs); -+ return; -+ } -+ port = &component->input[port_num]; -+ break; -+ case MMAL_PORT_TYPE_OUTPUT: -+ if (port_num >= component->outputs) { -+ pr_err("%s: port_num of %u >= number of ports %u", -+ __func__, port_num, -+ port_num >= component->outputs); -+ return; -+ } -+ port = &component->output[port_num]; -+ break; -+ case MMAL_PORT_TYPE_CLOCK: -+ if (port_num >= component->clocks) { -+ pr_err("%s: port_num of %u >= number of ports %u", -+ __func__, port_num, -+ port_num >= component->clocks); -+ return; -+ } -+ port = &component->clock[port_num]; -+ break; -+ default: -+ break; -+ } -+ -+ if (!mutex_trylock(&port->event_context_mutex)) { -+ pr_err("dropping event 0x%x\n", msg->u.event_to_host.cmd); -+ return; -+ } -+ msg_context = port->event_context; -+ -+ if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) { -+ /* message reception had an error */ -+ //pr_warn -+ pr_err("%s: error %d in reply\n", __func__, msg->h.status); -+ -+ msg_context->u.bulk.status = msg->h.status; -+ } else if (msg->u.event_to_host.length > MMAL_WORKER_EVENT_SPACE) { -+ /* data is not in message, queue a bulk receive */ -+ pr_err("%s: payload not in message - bulk receive??! NOT SUPPORTED\n", -+ __func__); -+ msg_context->u.bulk.status = -1; -+ } else { -+ memcpy(msg_context->u.bulk.buffer->buffer, -+ msg->u.event_to_host.data, -+ msg->u.event_to_host.length); -+ -+ msg_context->u.bulk.buffer_used = -+ msg->u.event_to_host.length; -+ -+ msg_context->u.bulk.mmal_flags = 0; -+ msg_context->u.bulk.dts = MMAL_TIME_UNKNOWN; -+ msg_context->u.bulk.pts = MMAL_TIME_UNKNOWN; -+ msg_context->u.bulk.cmd = msg->u.event_to_host.cmd; -+ -+ pr_debug("event component:%u port type:%d num:%d cmd:0x%x length:%d\n", -+ msg->u.event_to_host.client_component, -+ msg->u.event_to_host.port_type, -+ msg->u.event_to_host.port_num, -+ msg->u.event_to_host.cmd, msg->u.event_to_host.length); -+ } -+ -+ schedule_work(&msg_context->u.bulk.work); -+} -+ - /* deals with receipt of buffer to host message */ - static void buffer_to_host_cb(struct vchiq_mmal_instance *instance, - struct mmal_msg *msg, u32 msg_len) -@@ -1340,6 +1433,7 @@ static int port_disable(struct vchiq_mma - mmalbuf->mmal_flags = 0; - mmalbuf->dts = MMAL_TIME_UNKNOWN; - mmalbuf->pts = MMAL_TIME_UNKNOWN; -+ mmalbuf->cmd = 0; - port->buffer_cb(instance, - port, 0, mmalbuf); - } -@@ -1641,6 +1735,43 @@ int mmal_vchi_buffer_cleanup(struct mmal - } - EXPORT_SYMBOL_GPL(mmal_vchi_buffer_cleanup); - -+static void init_event_context(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ struct mmal_msg_context *ctx = get_msg_context(instance); -+ -+ mutex_init(&port->event_context_mutex); -+ -+ port->event_context = ctx; -+ ctx->u.bulk.instance = instance; -+ ctx->u.bulk.port = port; -+ ctx->u.bulk.buffer = -+ kzalloc(sizeof(*ctx->u.bulk.buffer), GFP_KERNEL); -+ if (!ctx->u.bulk.buffer) -+ goto release_msg_context; -+ ctx->u.bulk.buffer->buffer = kzalloc(MMAL_WORKER_EVENT_SPACE, -+ GFP_KERNEL); -+ if (!ctx->u.bulk.buffer->buffer) -+ goto release_buffer; -+ -+ INIT_WORK(&ctx->u.bulk.work, buffer_work_cb); -+ return; -+ -+release_buffer: -+ kfree(ctx->u.bulk.buffer); -+release_msg_context: -+ release_msg_context(ctx); -+} -+ -+static void free_event_context(struct vchiq_mmal_port *port) -+{ -+ struct mmal_msg_context *ctx = port->event_context; -+ -+ kfree(ctx->u.bulk.buffer->buffer); -+ kfree(ctx->u.bulk.buffer); -+ release_msg_context(ctx); -+} -+ - /* Initialise a mmal component and its ports - * - */ -@@ -1684,6 +1815,7 @@ int vchiq_mmal_component_init(struct vch - ret = port_info_get(instance, &component->control); - if (ret < 0) - goto release_component; -+ init_event_context(instance, &component->control); - - for (idx = 0; idx < component->inputs; idx++) { - component->input[idx].type = MMAL_PORT_TYPE_INPUT; -@@ -1694,6 +1826,7 @@ int vchiq_mmal_component_init(struct vch - ret = port_info_get(instance, &component->input[idx]); - if (ret < 0) - goto release_component; -+ init_event_context(instance, &component->input[idx]); - } - - for (idx = 0; idx < component->outputs; idx++) { -@@ -1705,6 +1838,7 @@ int vchiq_mmal_component_init(struct vch - ret = port_info_get(instance, &component->output[idx]); - if (ret < 0) - goto release_component; -+ init_event_context(instance, &component->output[idx]); - } - - for (idx = 0; idx < component->clocks; idx++) { -@@ -1716,6 +1850,7 @@ int vchiq_mmal_component_init(struct vch - ret = port_info_get(instance, &component->clock[idx]); - if (ret < 0) - goto release_component; -+ init_event_context(instance, &component->clock[idx]); - } - - *component_out = component; -@@ -1741,7 +1876,7 @@ EXPORT_SYMBOL_GPL(vchiq_mmal_component_i - int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, - struct vchiq_mmal_component *component) - { -- int ret; -+ int ret, idx; - - if (mutex_lock_interruptible(&instance->vchiq_mutex)) - return -EINTR; -@@ -1753,6 +1888,13 @@ int vchiq_mmal_component_finalise(struct - - component->in_use = 0; - -+ for (idx = 0; idx < component->inputs; idx++) -+ free_event_context(&component->input[idx]); -+ for (idx = 0; idx < component->outputs; idx++) -+ free_event_context(&component->output[idx]); -+ for (idx = 0; idx < component->clocks; idx++) -+ free_event_context(&component->clock[idx]); -+ - mutex_unlock(&instance->vchiq_mutex); - - return ret; ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -@@ -78,6 +78,10 @@ struct vchiq_mmal_port { - vchiq_mmal_buffer_cb buffer_cb; - /* callback context */ - void *cb_ctx; -+ -+ /* ensure serialised use of the one event context structure */ -+ struct mutex event_context_mutex; -+ struct mmal_msg_context *event_context; - }; - - struct vchiq_mmal_component { diff --git a/target/linux/brcm2708/patches-4.19/950-0270-arm64-dts-broadcom-Enable-fixups-for-overlays.patch b/target/linux/brcm2708/patches-4.19/950-0270-arm64-dts-broadcom-Enable-fixups-for-overlays.patch new file mode 100644 index 0000000000..96d2ad4699 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0270-arm64-dts-broadcom-Enable-fixups-for-overlays.patch @@ -0,0 +1,23 @@ +From bb8f38337d08dc1ac78ab251aa0b515eea45a79e Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 15 Jan 2019 09:56:41 +0000 +Subject: [PATCH] arm64: dts: broadcom: Enable fixups for overlays + +See: https://github.com/raspberrypi/linux/pull/2733 + +Signed-off-by: Phil Elwell +--- + arch/arm64/boot/dts/broadcom/Makefile | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -9,3 +9,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rp + + subdir-y += northstar2 + subdir-y += stingray ++ ++# Enable fixups to support overlays on BCM2835 platforms ++ifeq ($(CONFIG_ARCH_BCM2835),y) ++ DTC_FLAGS ?= -@ ++endif diff --git a/target/linux/brcm2708/patches-4.19/950-0270-staging-vc04_services-Support-sending-data-to-MMAL-p.patch b/target/linux/brcm2708/patches-4.19/950-0270-staging-vc04_services-Support-sending-data-to-MMAL-p.patch deleted file mode 100644 index b414b32285..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0270-staging-vc04_services-Support-sending-data-to-MMAL-p.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 483bef9dcddc4bcb9f4e250d91b31361a919b7ed Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 24 Sep 2018 18:26:02 +0100 -Subject: [PATCH 270/806] staging: vc04_services: Support sending data to MMAL - ports - -Add the ability to send data to ports. This only supports -zero copy mode as the required bulk transfer setup calls -are not done. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/vchiq-mmal/mmal-vchiq.c | 18 +++++++++++++----- - 1 file changed, 13 insertions(+), 5 deletions(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -428,11 +428,19 @@ buffer_from_host(struct vchiq_mmal_insta - m.u.buffer_from_host.buffer_header.data = - (u32)(unsigned long)buf->buffer; - m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; -- m.u.buffer_from_host.buffer_header.length = 0; /* nothing used yet */ -- m.u.buffer_from_host.buffer_header.offset = 0; /* no offset */ -- m.u.buffer_from_host.buffer_header.flags = 0; /* no flags */ -- m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; -- m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; -+ if (port->type == MMAL_PORT_TYPE_OUTPUT) { -+ m.u.buffer_from_host.buffer_header.length = 0; -+ m.u.buffer_from_host.buffer_header.offset = 0; -+ m.u.buffer_from_host.buffer_header.flags = 0; -+ m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; -+ m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; -+ } else { -+ m.u.buffer_from_host.buffer_header.length = buf->length; -+ m.u.buffer_from_host.buffer_header.offset = 0; -+ m.u.buffer_from_host.buffer_header.flags = buf->mmal_flags; -+ m.u.buffer_from_host.buffer_header.pts = buf->pts; -+ m.u.buffer_from_host.buffer_header.dts = buf->dts; -+ } - - /* clear buffer type sepecific data */ - memset(&m.u.buffer_from_host.buffer_header_type_specific, 0, diff --git a/target/linux/brcm2708/patches-4.19/950-0271-dtoverlays-fe-pi-audio-fix-sgtl5000-compatible-strin.patch b/target/linux/brcm2708/patches-4.19/950-0271-dtoverlays-fe-pi-audio-fix-sgtl5000-compatible-strin.patch new file mode 100644 index 0000000000..09ff03e81b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0271-dtoverlays-fe-pi-audio-fix-sgtl5000-compatible-strin.patch @@ -0,0 +1,27 @@ +From 1d26e4d72f2d0563cc6455e682a5d4c491de178c Mon Sep 17 00:00:00 2001 +From: Ben Wolsieffer +Date: Sun, 9 Dec 2018 16:46:00 -0500 +Subject: [PATCH] dtoverlays: fe-pi-audio: fix sgtl5000 compatible + string + +The compatible string was set to "fepi,sgtl5000", which worked for some +reason in 4.14, but does not work in 4.19, presumably due to some +change in the kernel matching logic. The correct string is +"fsl,sgtl5000". + +Signed-off-by: Ben Wolsieffer +--- + arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts +@@ -39,7 +39,7 @@ + + sgtl5000@0a { + #sound-dai-cells = <0>; +- compatible = "fepi,sgtl5000"; ++ compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&sgtl5000_mclk>; + micbias-resistor-k-ohms = <2>; diff --git a/target/linux/brcm2708/patches-4.19/950-0271-staging-vc04_services-Fixup-vchiq-mmal-include-order.patch b/target/linux/brcm2708/patches-4.19/950-0271-staging-vc04_services-Fixup-vchiq-mmal-include-order.patch deleted file mode 100644 index 31301e4ad3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0271-staging-vc04_services-Fixup-vchiq-mmal-include-order.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 2a5a03926a8c6ae7375355de00814234e4e303ed Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 25 Sep 2018 16:57:40 +0100 -Subject: [PATCH 271/806] staging: vc04_services: Fixup vchiq-mmal include - ordering - -There were dependencies on including the headers in the correct -order. Fix up the headers so that they include the other -headers that they depend on themselves. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h | 1 + - drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h | 1 + - 2 files changed, 2 insertions(+) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-msg.h -@@ -38,6 +38,7 @@ - #include "mmal-msg-common.h" - #include "mmal-msg-format.h" - #include "mmal-msg-port.h" -+#include "mmal-vchiq.h" - - enum mmal_msg_type { - MMAL_MSG_TYPE_QUIT = 1, ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -@@ -16,6 +16,7 @@ - #ifndef MMAL_VCHIQ_H - #define MMAL_VCHIQ_H - -+#include "mmal-common.h" - #include "mmal-msg-format.h" - - #define MAX_PORT_COUNT 4 diff --git a/target/linux/brcm2708/patches-4.19/950-0272-bcm2835_smi-re-add-dereference-to-fix-DMA-transfers.patch b/target/linux/brcm2708/patches-4.19/950-0272-bcm2835_smi-re-add-dereference-to-fix-DMA-transfers.patch new file mode 100644 index 0000000000..37f1cb53fc --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0272-bcm2835_smi-re-add-dereference-to-fix-DMA-transfers.patch @@ -0,0 +1,20 @@ +From e5111d81c8efc17d8d585510980d3fe49c998741 Mon Sep 17 00:00:00 2001 +From: Ezekiel Bethel +Date: Wed, 12 Dec 2018 19:11:13 +0000 +Subject: [PATCH] bcm2835_smi: re-add dereference to fix DMA transfers + +--- + drivers/misc/bcm2835_smi.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/misc/bcm2835_smi.c ++++ b/drivers/misc/bcm2835_smi.c +@@ -879,7 +879,7 @@ static int bcm2835_smi_probe(struct plat + goto err; + } + addr = of_get_address(node, 0, NULL, NULL); +- inst->smi_regs_busaddr = be32_to_cpu(addr); ++ inst->smi_regs_busaddr = be32_to_cpu(*addr); + + err = bcm2835_smi_dma_setup(inst); + if (err) diff --git a/target/linux/brcm2708/patches-4.19/950-0272-staging-vc04_services-Add-new-vc-sm-cma-driver.patch b/target/linux/brcm2708/patches-4.19/950-0272-staging-vc04_services-Add-new-vc-sm-cma-driver.patch deleted file mode 100644 index 749fb9714b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0272-staging-vc04_services-Add-new-vc-sm-cma-driver.patch +++ /dev/null @@ -1,1881 +0,0 @@ -From 2994fdc0a9d48be68d6e403bc8ddadecfc8d8796 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 25 Sep 2018 10:27:11 +0100 -Subject: [PATCH 272/806] staging: vc04_services: Add new vc-sm-cma driver - -This new driver allows contiguous memory blocks to be imported -into the VideoCore VPU memory map, and manages the lifetime of -those objects, only releasing the source dmabuf once the VPU has -confirmed it has finished with it. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/Kconfig | 1 + - drivers/staging/vc04_services/Makefile | 1 + - .../staging/vc04_services/vc-sm-cma/Kconfig | 10 + - .../staging/vc04_services/vc-sm-cma/Makefile | 8 + - drivers/staging/vc04_services/vc-sm-cma/TODO | 2 + - .../staging/vc04_services/vc-sm-cma/vc_sm.c | 838 ++++++++++++++++++ - .../staging/vc04_services/vc-sm-cma/vc_sm.h | 59 ++ - .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 498 +++++++++++ - .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.h | 59 ++ - .../vc04_services/vc-sm-cma/vc_sm_defs.h | 298 +++++++ - .../vc04_services/vc-sm-cma/vc_sm_knl.h | 28 + - 11 files changed, 1802 insertions(+) - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/Kconfig - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/Makefile - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/TODO - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm.c - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm.h - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.h - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_defs.h - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h - ---- a/drivers/staging/vc04_services/Kconfig -+++ b/drivers/staging/vc04_services/Kconfig -@@ -22,6 +22,7 @@ source "drivers/staging/vc04_services/bc - - source "drivers/staging/vc04_services/bcm2835-camera/Kconfig" - source "drivers/staging/vc04_services/vchiq-mmal/Kconfig" -+source "drivers/staging/vc04_services/vc-sm-cma/Kconfig" - - endif - ---- a/drivers/staging/vc04_services/Makefile -+++ b/drivers/staging/vc04_services/Makefile -@@ -13,6 +13,7 @@ vchiq-objs := \ - obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/ - obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-camera/ - obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += vchiq-mmal/ -+obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma/ - - ccflags-y += -Idrivers/staging/vc04_services -D__VCCOREVER__=0x04000000 - ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/Kconfig -@@ -0,0 +1,10 @@ -+config BCM_VC_SM_CMA -+ tristate "VideoCore Shared Memory (CMA) driver" -+ depends on BCM2835_VCHIQ -+ select RBTREE -+ select DMA_SHARED_BUFFER -+ help -+ Say Y here to enable the shared memory interface that -+ supports sharing dmabufs with VideoCore. -+ This operates over the VCHIQ interface to a service -+ running on VideoCore. ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/Makefile -@@ -0,0 +1,8 @@ -+ccflags-y += -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vchi -Idrivers/staging/vc04_services/interface/vchiq_arm -+# -I"drivers/staging/android/ion/" -I"$(srctree)/fs/" -+ccflags-y += -D__VCCOREVER__=0 -+ -+vc-sm-cma-$(CONFIG_BCM_VC_SM_CMA) := \ -+ vc_sm.o vc_sm_cma_vchi.o -+ -+obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma.o ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/TODO -@@ -0,0 +1,2 @@ -+1) Convert to a platform driver. -+ ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -0,0 +1,838 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * VideoCore Shared Memory driver using CMA. -+ * -+ * Copyright: 2018, Raspberry Pi (Trading) Ltd -+ * Dave Stevenson -+ * -+ * Based on vmcs_sm driver from Broadcom Corporation for some API, -+ * and taking some code for CMA/dmabuf handling from the Android Ion -+ * driver (Google/Linaro). -+ * -+ * This is cut down version to only support import of dma_bufs from -+ * other kernel drivers. A more complete implementation of the old -+ * vmcs_sm functionality can follow later. -+ * -+ */ -+ -+/* ---- Include Files ----------------------------------------------------- */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "vchiq_connected.h" -+#include "vc_sm_cma_vchi.h" -+ -+#include "vc_sm.h" -+#include "vc_sm_knl.h" -+ -+/* ---- Private Constants and Types --------------------------------------- */ -+ -+#define DEVICE_NAME "vcsm-cma" -+#define DEVICE_MINOR 0 -+ -+#define VC_SM_RESOURCE_NAME_DEFAULT "sm-host-resource" -+ -+#define VC_SM_DIR_ROOT_NAME "vcsm-cma" -+#define VC_SM_STATE "state" -+ -+/* Private file data associated with each opened device. */ -+struct vc_sm_privdata_t { -+ pid_t pid; /* PID of creator. */ -+ -+ int restart_sys; /* Tracks restart on interrupt. */ -+ enum vc_sm_msg_type int_action; /* Interrupted action. */ -+ u32 int_trans_id; /* Interrupted transaction. */ -+}; -+ -+typedef int (*VC_SM_SHOW) (struct seq_file *s, void *v); -+struct sm_pde_t { -+ VC_SM_SHOW show; /* Debug fs function hookup. */ -+ struct dentry *dir_entry; /* Debug fs directory entry. */ -+ void *priv_data; /* Private data */ -+}; -+ -+/* Global state information. */ -+struct sm_state_t { -+ struct platform_device *pdev; -+ -+ struct miscdevice dev; -+ struct sm_instance *sm_handle; /* Handle for videocore service. */ -+ -+ struct mutex map_lock; /* Global map lock. */ -+ struct list_head buffer_list; /* List of buffer. */ -+ -+ struct vc_sm_privdata_t *data_knl; /* Kernel internal data tracking. */ -+ struct dentry *dir_root; /* Debug fs entries root. */ -+ struct sm_pde_t dir_state; /* Debug fs entries state sub-tree. */ -+ -+ bool require_released_callback; /* VPU will send a released msg when it -+ * has finished with a resource. -+ */ -+ u32 int_trans_id; /* Interrupted transaction. */ -+}; -+ -+/* ---- Private Variables ----------------------------------------------- */ -+ -+static struct sm_state_t *sm_state; -+static int sm_inited; -+ -+/* ---- Private Function Prototypes -------------------------------------- */ -+ -+/* ---- Private Functions ------------------------------------------------ */ -+ -+static int vc_sm_cma_seq_file_show(struct seq_file *s, void *v) -+{ -+ struct sm_pde_t *sm_pde; -+ -+ sm_pde = (struct sm_pde_t *)(s->private); -+ -+ if (sm_pde && sm_pde->show) -+ sm_pde->show(s, v); -+ -+ return 0; -+} -+ -+static int vc_sm_cma_single_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, vc_sm_cma_seq_file_show, inode->i_private); -+} -+ -+static const struct file_operations vc_sm_cma_debug_fs_fops = { -+ .open = vc_sm_cma_single_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+static int vc_sm_cma_global_state_show(struct seq_file *s, void *v) -+{ -+ struct vc_sm_buffer *resource = NULL; -+ int resource_count = 0; -+ -+ if (!sm_state) -+ return 0; -+ -+ seq_printf(s, "\nVC-ServiceHandle 0x%x\n", -+ (unsigned int)sm_state->sm_handle); -+ -+ /* Log all applicable mapping(s). */ -+ -+ mutex_lock(&sm_state->map_lock); -+ seq_puts(s, "\nResources\n"); -+ if (!list_empty(&sm_state->buffer_list)) { -+ list_for_each_entry(resource, &sm_state->buffer_list, -+ global_buffer_list) { -+ resource_count++; -+ -+ seq_printf(s, "\nResource %p\n", -+ resource); -+ seq_printf(s, " NAME %s\n", -+ resource->name); -+ seq_printf(s, " SIZE %d\n", -+ resource->size); -+ seq_printf(s, " DMABUF %p\n", -+ resource->dma_buf); -+ seq_printf(s, " ATTACH %p\n", -+ resource->attach); -+ seq_printf(s, " SG_TABLE %p\n", -+ resource->sg_table); -+ seq_printf(s, " SGT %p\n", -+ resource->sgt); -+ seq_printf(s, " DMA_ADDR %pad\n", -+ &resource->dma_addr); -+ seq_printf(s, " VC_HANDLE %08x\n", -+ resource->vc_handle); -+ seq_printf(s, " VC_MAPPING %d\n", -+ resource->vpu_state); -+ } -+ } -+ seq_printf(s, "\n\nTotal resource count: %d\n\n", resource_count); -+ -+ mutex_unlock(&sm_state->map_lock); -+ -+ return 0; -+} -+ -+/* -+ * Adds a buffer to the private data list which tracks all the allocated -+ * data. -+ */ -+static void vc_sm_add_resource(struct vc_sm_privdata_t *privdata, -+ struct vc_sm_buffer *buffer) -+{ -+ mutex_lock(&sm_state->map_lock); -+ list_add(&buffer->global_buffer_list, &sm_state->buffer_list); -+ mutex_unlock(&sm_state->map_lock); -+ -+ pr_debug("[%s]: added buffer %p (name %s, size %d)\n", -+ __func__, buffer, buffer->name, buffer->size); -+} -+ -+/* -+ * Release an allocation. -+ * All refcounting is done via the dma buf object. -+ */ -+static void vc_sm_release_resource(struct vc_sm_buffer *buffer, int force) -+{ -+ mutex_lock(&sm_state->map_lock); -+ mutex_lock(&buffer->lock); -+ -+ pr_debug("[%s]: buffer %p (name %s, size %d)\n", -+ __func__, buffer, buffer->name, buffer->size); -+ -+ if (buffer->vc_handle && buffer->vpu_state == VPU_MAPPED) { -+ struct vc_sm_free_t free = { buffer->vc_handle, 0 }; -+ int status = vc_sm_cma_vchi_free(sm_state->sm_handle, &free, -+ &sm_state->int_trans_id); -+ if (status != 0 && status != -EINTR) { -+ pr_err("[%s]: failed to free memory on videocore (status: %u, trans_id: %u)\n", -+ __func__, status, sm_state->int_trans_id); -+ } -+ -+ if (sm_state->require_released_callback) { -+ /* Need to wait for the VPU to confirm the free */ -+ -+ /* Retain a reference on this until the VPU has -+ * released it -+ */ -+ buffer->vpu_state = VPU_UNMAPPING; -+ goto defer; -+ } -+ buffer->vpu_state = VPU_NOT_MAPPED; -+ buffer->vc_handle = 0; -+ } -+ if (buffer->vc_handle) { -+ /* We've sent the unmap request but not had the response. */ -+ pr_err("[%s]: Waiting for VPU unmap response on %p\n", -+ __func__, buffer); -+ goto defer; -+ } -+ if (buffer->in_use) { -+ /* Don't release dmabuf here - we await the release */ -+ pr_err("[%s]: buffer %p is still in use\n", -+ __func__, buffer); -+ goto defer; -+ } -+ -+ /* Handle cleaning up imported dmabufs */ -+ if (buffer->sgt) { -+ dma_buf_unmap_attachment(buffer->attach, buffer->sgt, -+ DMA_BIDIRECTIONAL); -+ buffer->sgt = NULL; -+ } -+ if (buffer->attach) { -+ dma_buf_detach(buffer->dma_buf, buffer->attach); -+ buffer->attach = NULL; -+ } -+ -+ /* Release the dma_buf (whether ours or imported) */ -+ if (buffer->import_dma_buf) { -+ dma_buf_put(buffer->import_dma_buf); -+ buffer->import_dma_buf = NULL; -+ buffer->dma_buf = NULL; -+ } else if (buffer->dma_buf) { -+ dma_buf_put(buffer->dma_buf); -+ buffer->dma_buf = NULL; -+ } -+ -+ if (buffer->sg_table && !buffer->import_dma_buf) { -+ /* Our own allocation that we need to dma_unmap_sg */ -+ dma_unmap_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, -+ buffer->sg_table->nents, DMA_BIDIRECTIONAL); -+ } -+ -+ /* Free the local resource. Start by removing it from the list */ -+ buffer->private = NULL; -+ list_del(&buffer->global_buffer_list); -+ -+ mutex_unlock(&buffer->lock); -+ mutex_unlock(&sm_state->map_lock); -+ -+ mutex_destroy(&buffer->lock); -+ -+ kfree(buffer); -+ return; -+ -+defer: -+ mutex_unlock(&buffer->lock); -+ mutex_unlock(&sm_state->map_lock); -+} -+ -+/* Create support for private data tracking. */ -+static struct vc_sm_privdata_t *vc_sm_cma_create_priv_data(pid_t id) -+{ -+ char alloc_name[32]; -+ struct vc_sm_privdata_t *file_data = NULL; -+ -+ /* Allocate private structure. */ -+ file_data = kzalloc(sizeof(*file_data), GFP_KERNEL); -+ -+ if (!file_data) -+ return NULL; -+ -+ snprintf(alloc_name, sizeof(alloc_name), "%d", id); -+ -+ file_data->pid = id; -+ -+ return file_data; -+} -+ -+/* Dma_buf operations for chaining through to an imported dma_buf */ -+static -+int vc_sm_import_dma_buf_attach(struct dma_buf *dmabuf, -+ struct dma_buf_attachment *attachment) -+{ -+ struct vc_sm_buffer *res = dmabuf->priv; -+ -+ if (!res->import_dma_buf) -+ return -EINVAL; -+ return res->import_dma_buf->ops->attach(res->import_dma_buf, -+ attachment); -+} -+ -+static -+void vc_sm_import_dma_buf_detatch(struct dma_buf *dmabuf, -+ struct dma_buf_attachment *attachment) -+{ -+ struct vc_sm_buffer *res = dmabuf->priv; -+ -+ if (!res->import_dma_buf) -+ return; -+ res->import_dma_buf->ops->detach(res->import_dma_buf, attachment); -+} -+ -+static -+struct sg_table *vc_sm_import_map_dma_buf(struct dma_buf_attachment *attachment, -+ enum dma_data_direction direction) -+{ -+ struct vc_sm_buffer *res = attachment->dmabuf->priv; -+ -+ if (!res->import_dma_buf) -+ return NULL; -+ return res->import_dma_buf->ops->map_dma_buf(attachment, direction); -+} -+ -+static -+void vc_sm_import_unmap_dma_buf(struct dma_buf_attachment *attachment, -+ struct sg_table *table, -+ enum dma_data_direction direction) -+{ -+ struct vc_sm_buffer *res = attachment->dmabuf->priv; -+ -+ if (!res->import_dma_buf) -+ return; -+ res->import_dma_buf->ops->unmap_dma_buf(attachment, table, direction); -+} -+ -+static -+int vc_sm_import_dmabuf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma) -+{ -+ struct vc_sm_buffer *res = dmabuf->priv; -+ -+ pr_debug("%s: mmap dma_buf %p, res %p, imported db %p\n", __func__, -+ dmabuf, res, res->import_dma_buf); -+ if (!res->import_dma_buf) { -+ pr_err("%s: mmap dma_buf %p- not an imported buffer\n", -+ __func__, dmabuf); -+ return -EINVAL; -+ } -+ return res->import_dma_buf->ops->mmap(res->import_dma_buf, vma); -+} -+ -+static -+void vc_sm_import_dma_buf_release(struct dma_buf *dmabuf) -+{ -+ struct vc_sm_buffer *res = dmabuf->priv; -+ -+ pr_debug("%s: Relasing dma_buf %p\n", __func__, dmabuf); -+ if (!res->import_dma_buf) -+ return; -+ -+ res->in_use = 0; -+ -+ vc_sm_release_resource(res, 0); -+} -+ -+static -+void *vc_sm_import_dma_buf_kmap(struct dma_buf *dmabuf, -+ unsigned long offset) -+{ -+ struct vc_sm_buffer *res = dmabuf->priv; -+ -+ if (!res->import_dma_buf) -+ return NULL; -+ return res->import_dma_buf->ops->map(res->import_dma_buf, -+ offset); -+} -+ -+static -+void vc_sm_import_dma_buf_kunmap(struct dma_buf *dmabuf, -+ unsigned long offset, void *ptr) -+{ -+ struct vc_sm_buffer *res = dmabuf->priv; -+ -+ if (!res->import_dma_buf) -+ return; -+ res->import_dma_buf->ops->unmap(res->import_dma_buf, -+ offset, ptr); -+} -+ -+static -+int vc_sm_import_dma_buf_begin_cpu_access(struct dma_buf *dmabuf, -+ enum dma_data_direction direction) -+{ -+ struct vc_sm_buffer *res = dmabuf->priv; -+ -+ if (!res->import_dma_buf) -+ return -EINVAL; -+ return res->import_dma_buf->ops->begin_cpu_access(res->import_dma_buf, -+ direction); -+} -+ -+static -+int vc_sm_import_dma_buf_end_cpu_access(struct dma_buf *dmabuf, -+ enum dma_data_direction direction) -+{ -+ struct vc_sm_buffer *res = dmabuf->priv; -+ -+ if (!res->import_dma_buf) -+ return -EINVAL; -+ return res->import_dma_buf->ops->end_cpu_access(res->import_dma_buf, -+ direction); -+} -+ -+static const struct dma_buf_ops dma_buf_import_ops = { -+ .map_dma_buf = vc_sm_import_map_dma_buf, -+ .unmap_dma_buf = vc_sm_import_unmap_dma_buf, -+ .mmap = vc_sm_import_dmabuf_mmap, -+ .release = vc_sm_import_dma_buf_release, -+ .attach = vc_sm_import_dma_buf_attach, -+ .detach = vc_sm_import_dma_buf_detatch, -+ .begin_cpu_access = vc_sm_import_dma_buf_begin_cpu_access, -+ .end_cpu_access = vc_sm_import_dma_buf_end_cpu_access, -+ .map = vc_sm_import_dma_buf_kmap, -+ .unmap = vc_sm_import_dma_buf_kunmap, -+}; -+ -+/* Import a dma_buf to be shared with VC. */ -+int -+vc_sm_cma_import_dmabuf_internal(struct vc_sm_privdata_t *private, -+ struct dma_buf *dma_buf, -+ struct dma_buf **imported_buf) -+{ -+ DEFINE_DMA_BUF_EXPORT_INFO(exp_info); -+ struct vc_sm_buffer *buffer = NULL; -+ struct vc_sm_import import = { }; -+ struct vc_sm_import_result result = { }; -+ struct dma_buf_attachment *attach = NULL; -+ struct sg_table *sgt = NULL; -+ int ret = 0; -+ int status; -+ -+ /* Setup our allocation parameters */ -+ pr_debug("%s: importing dma_buf %p\n", __func__, dma_buf); -+ -+ get_dma_buf(dma_buf); -+ dma_buf = dma_buf; -+ -+ attach = dma_buf_attach(dma_buf, &sm_state->pdev->dev); -+ if (IS_ERR(attach)) { -+ ret = PTR_ERR(attach); -+ goto error; -+ } -+ -+ sgt = dma_buf_map_attachment(attach, DMA_BIDIRECTIONAL); -+ if (IS_ERR(sgt)) { -+ ret = PTR_ERR(sgt); -+ goto error; -+ } -+ -+ /* Verify that the address block is contiguous */ -+ if (sgt->nents != 1) { -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ /* Allocate local buffer to track this allocation. */ -+ buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); -+ if (!buffer) { -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ import.type = VC_SM_ALLOC_NON_CACHED; -+ import.addr = (uint32_t)sg_dma_address(sgt->sgl); -+ if ((import.addr & 0xC0000000) != 0xC0000000) { -+ pr_err("%s: Expecting an uncached alias for dma_addr %08x\n", -+ __func__, import.addr); -+ import.addr |= 0xC0000000; -+ } -+ import.size = sg_dma_len(sgt->sgl); -+ import.allocator = current->tgid; -+ import.kernel_id = (uint32_t)buffer; //FIXME: 64 bit support needed. -+ -+ memcpy(import.name, VC_SM_RESOURCE_NAME_DEFAULT, -+ sizeof(VC_SM_RESOURCE_NAME_DEFAULT)); -+ -+ pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %p, size %u\n", -+ __func__, import.name, import.type, (void *)import.addr, -+ import.size); -+ -+ /* Allocate the videocore buffer. */ -+ status = vc_sm_cma_vchi_import(sm_state->sm_handle, &import, &result, -+ &sm_state->int_trans_id); -+ if (status == -EINTR) { -+ pr_debug("[%s]: requesting import memory action restart (trans_id: %u)\n", -+ __func__, sm_state->int_trans_id); -+ ret = -ERESTARTSYS; -+ private->restart_sys = -EINTR; -+ private->int_action = VC_SM_MSG_TYPE_IMPORT; -+ goto error; -+ } else if (status || !result.res_handle) { -+ pr_debug("[%s]: failed to import memory on videocore (status: %u, trans_id: %u)\n", -+ __func__, status, sm_state->int_trans_id); -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ mutex_init(&buffer->lock); -+ INIT_LIST_HEAD(&buffer->attachments); -+ memcpy(buffer->name, import.name, -+ min(sizeof(buffer->name), sizeof(import.name) - 1)); -+ -+ /* Keep track of the buffer we created. */ -+ buffer->private = private; -+ buffer->vc_handle = result.res_handle; -+ buffer->size = import.size; -+ buffer->vpu_state = VPU_MAPPED; -+ -+ buffer->import_dma_buf = dma_buf; -+ -+ buffer->attach = attach; -+ buffer->sgt = sgt; -+ buffer->dma_addr = sg_dma_address(sgt->sgl); -+ buffer->in_use = 1; -+ -+ /* -+ * We're done - we need to export a new dmabuf chaining through most -+ * functions, but enabling us to release our own internal references -+ * here. -+ */ -+ exp_info.ops = &dma_buf_import_ops; -+ exp_info.size = import.size; -+ exp_info.flags = O_RDWR; -+ exp_info.priv = buffer; -+ -+ buffer->dma_buf = dma_buf_export(&exp_info); -+ if (IS_ERR(buffer->dma_buf)) { -+ ret = PTR_ERR(buffer->dma_buf); -+ goto error; -+ } -+ -+ vc_sm_add_resource(private, buffer); -+ -+ *imported_buf = buffer->dma_buf; -+ -+ return 0; -+ -+error: -+ if (result.res_handle) { -+ struct vc_sm_free_t free = { result.res_handle, 0 }; -+ -+ vc_sm_cma_vchi_free(sm_state->sm_handle, &free, -+ &sm_state->int_trans_id); -+ } -+ kfree(buffer); -+ if (sgt) -+ dma_buf_unmap_attachment(attach, sgt, DMA_BIDIRECTIONAL); -+ if (attach) -+ dma_buf_detach(dma_buf, attach); -+ dma_buf_put(dma_buf); -+ return ret; -+} -+ -+/* FIXME: Pass a function pointer to this into vc_vchi_sm.c */ -+void -+vc_sm_vpu_event(struct sm_instance *instance, struct vc_sm_result_t *reply, -+ int reply_len) -+{ -+ switch (reply->trans_id & ~0x80000000) { -+ case VC_SM_MSG_TYPE_CLIENT_VERSION: -+ { -+ /* Acknowledge that the firmware supports the version command */ -+ pr_debug("%s: firmware acked version msg. Require release cb\n", -+ __func__); -+ sm_state->require_released_callback = true; -+ } -+ break; -+ case VC_SM_MSG_TYPE_RELEASED: -+ { -+ struct vc_sm_released *release = (struct vc_sm_released *)reply; -+ struct vc_sm_buffer *buffer = -+ (struct vc_sm_buffer *)release->kernel_id; -+ -+ /* -+ * FIXME: Need to check buffer is still valid and allocated -+ * before continuing -+ */ -+ pr_debug("%s: Released addr %08x, size %u, id %08x, mem_handle %08x\n", -+ __func__, release->addr, release->size, -+ release->kernel_id, release->vc_handle); -+ mutex_lock(&buffer->lock); -+ buffer->vc_handle = 0; -+ buffer->vpu_state = VPU_NOT_MAPPED; -+ mutex_unlock(&buffer->lock); -+ -+ vc_sm_release_resource(buffer, 0); -+ } -+ break; -+ default: -+ pr_err("%s: Unknown vpu cmd %x\n", __func__, reply->trans_id); -+ break; -+ } -+} -+ -+/* Videocore connected. */ -+static void vc_sm_connected_init(void) -+{ -+ int ret; -+ VCHI_INSTANCE_T vchi_instance; -+ struct vc_sm_version version; -+ struct vc_sm_result_t version_result; -+ -+ pr_info("[%s]: start\n", __func__); -+ -+ /* -+ * Initialize and create a VCHI connection for the shared memory service -+ * running on videocore. -+ */ -+ ret = vchi_initialise(&vchi_instance); -+ if (ret) { -+ pr_err("[%s]: failed to initialise VCHI instance (ret=%d)\n", -+ __func__, ret); -+ -+ ret = -EIO; -+ goto err_free_mem; -+ } -+ -+ ret = vchi_connect(vchi_instance); -+ if (ret) { -+ pr_err("[%s]: failed to connect VCHI instance (ret=%d)\n", -+ __func__, ret); -+ -+ ret = -EIO; -+ goto err_free_mem; -+ } -+ -+ /* Initialize an instance of the shared memory service. */ -+ sm_state->sm_handle = vc_sm_cma_vchi_init(vchi_instance, 1, -+ vc_sm_vpu_event); -+ if (!sm_state->sm_handle) { -+ pr_err("[%s]: failed to initialize shared memory service\n", -+ __func__); -+ -+ ret = -EPERM; -+ goto err_free_mem; -+ } -+ -+ /* Create a debug fs directory entry (root). */ -+ sm_state->dir_root = debugfs_create_dir(VC_SM_DIR_ROOT_NAME, NULL); -+ if (!sm_state->dir_root) { -+ pr_err("[%s]: failed to create \'%s\' directory entry\n", -+ __func__, VC_SM_DIR_ROOT_NAME); -+ -+ ret = -EPERM; -+ goto err_stop_sm_service; -+ } -+ -+ sm_state->dir_state.show = &vc_sm_cma_global_state_show; -+ sm_state->dir_state.dir_entry = -+ debugfs_create_file(VC_SM_STATE, 0444, sm_state->dir_root, -+ &sm_state->dir_state, -+ &vc_sm_cma_debug_fs_fops); -+ -+ INIT_LIST_HEAD(&sm_state->buffer_list); -+ -+ sm_state->data_knl = vc_sm_cma_create_priv_data(0); -+ if (!sm_state->data_knl) { -+ pr_err("[%s]: failed to create kernel private data tracker\n", -+ __func__); -+ goto err_remove_shared_memory; -+ } -+ -+ version.version = 1; -+ ret = vc_sm_cma_vchi_client_version(sm_state->sm_handle, &version, -+ &version_result, -+ &sm_state->int_trans_id); -+ if (ret) { -+ pr_err("[%s]: Failed to send version request %d\n", __func__, -+ ret); -+ } -+ -+ /* Done! */ -+ sm_inited = 1; -+ pr_info("[%s]: installed successfully\n", __func__); -+ return; -+ -+err_remove_shared_memory: -+ debugfs_remove_recursive(sm_state->dir_root); -+err_stop_sm_service: -+ vc_sm_cma_vchi_stop(&sm_state->sm_handle); -+err_free_mem: -+ kfree(sm_state); -+ pr_info("[%s]: failed, ret %d\n", __func__, ret); -+} -+ -+/* Driver loading. */ -+static int bcm2835_vc_sm_cma_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ int err; -+ -+ pr_info("%s: Videocore shared memory driver\n", __func__); -+ -+ sm_state = kzalloc(sizeof(*sm_state), GFP_KERNEL); -+ if (!sm_state) -+ return -ENOMEM; -+ sm_state->pdev = pdev; -+ mutex_init(&sm_state->map_lock); -+ -+ dev->coherent_dma_mask = DMA_BIT_MASK(32); -+ dev->dma_mask = &dev->coherent_dma_mask; -+ err = of_dma_configure(dev, NULL, true); -+ if (err) { -+ dev_err(dev, "Unable to setup DMA: %d\n", err); -+ return err; -+ } -+ -+ vchiq_add_connected_callback(vc_sm_connected_init); -+ return 0; -+} -+ -+/* Driver unloading. */ -+static int bcm2835_vc_sm_cma_remove(struct platform_device *pdev) -+{ -+ pr_debug("[%s]: start\n", __func__); -+ if (sm_inited) { -+ /* Remove shared memory device. */ -+ misc_deregister(&sm_state->dev); -+ -+ /* Remove all proc entries. */ -+ //debugfs_remove_recursive(sm_state->dir_root); -+ -+ /* Stop the videocore shared memory service. */ -+ vc_sm_cma_vchi_stop(&sm_state->sm_handle); -+ -+ /* Free the memory for the state structure. */ -+ mutex_destroy(&sm_state->map_lock); -+ kfree(sm_state); -+ } -+ -+ pr_debug("[%s]: end\n", __func__); -+ return 0; -+} -+ -+/* Get an internal resource handle mapped from the external one. */ -+int vc_sm_cma_int_handle(int handle) -+{ -+ struct dma_buf *dma_buf = (struct dma_buf *)handle; -+ struct vc_sm_buffer *res; -+ -+ /* Validate we can work with this device. */ -+ if (!sm_state || !handle) { -+ pr_err("[%s]: invalid input\n", __func__); -+ return 0; -+ } -+ -+ res = (struct vc_sm_buffer *)dma_buf->priv; -+ return res->vc_handle; -+} -+EXPORT_SYMBOL_GPL(vc_sm_cma_int_handle); -+ -+/* Free a previously allocated shared memory handle and block. */ -+int vc_sm_cma_free(int handle) -+{ -+ struct dma_buf *dma_buf = (struct dma_buf *)handle; -+ -+ /* Validate we can work with this device. */ -+ if (!sm_state || !handle) { -+ pr_err("[%s]: invalid input\n", __func__); -+ return -EPERM; -+ } -+ -+ pr_debug("%s: handle %08x/dmabuf %p\n", __func__, handle, dma_buf); -+ -+ dma_buf_put(dma_buf); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(vc_sm_cma_free); -+ -+/* Import a dmabuf to be shared with VC. */ -+int vc_sm_cma_import_dmabuf(struct dma_buf *src_dmabuf, int *handle) -+{ -+ struct dma_buf *new_dma_buf; -+ struct vc_sm_buffer *res; -+ int ret; -+ -+ /* Validate we can work with this device. */ -+ if (!sm_state || !src_dmabuf || !handle) { -+ pr_err("[%s]: invalid input\n", __func__); -+ return -EPERM; -+ } -+ -+ ret = vc_sm_cma_import_dmabuf_internal(sm_state->data_knl, src_dmabuf, -+ &new_dma_buf); -+ -+ if (!ret) { -+ pr_debug("%s: imported to ptr %p\n", __func__, new_dma_buf); -+ res = (struct vc_sm_buffer *)new_dma_buf->priv; -+ -+ /* Assign valid handle at this time.*/ -+ *handle = (int)new_dma_buf; -+ } else { -+ /* -+ * succeeded in importing the dma_buf, but then -+ * failed to look it up again. How? -+ * Release the fd again. -+ */ -+ pr_err("%s: imported vc_sm_cma_get_buffer failed %d\n", -+ __func__, ret); -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vc_sm_cma_import_dmabuf); -+ -+static struct platform_driver bcm2835_vcsm_cma_driver = { -+ .probe = bcm2835_vc_sm_cma_probe, -+ .remove = bcm2835_vc_sm_cma_remove, -+ .driver = { -+ .name = DEVICE_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+module_platform_driver(bcm2835_vcsm_cma_driver); -+ -+MODULE_AUTHOR("Dave Stevenson"); -+MODULE_DESCRIPTION("VideoCore CMA Shared Memory Driver"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:vcsm-cma"); ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h -@@ -0,0 +1,59 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+ -+/* -+ * VideoCore Shared Memory driver using CMA. -+ * -+ * Copyright: 2018, Raspberry Pi (Trading) Ltd -+ * -+ */ -+ -+#ifndef VC_SM_H -+#define VC_SM_H -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define VC_SM_MAX_NAME_LEN 32 -+ -+enum vc_sm_vpu_mapping_state { -+ VPU_NOT_MAPPED, -+ VPU_MAPPED, -+ VPU_UNMAPPING -+}; -+ -+struct vc_sm_buffer { -+ struct list_head global_buffer_list; /* Global list of buffers. */ -+ -+ size_t size; -+ -+ /* Lock over all the following state for this buffer */ -+ struct mutex lock; -+ struct sg_table *sg_table; -+ struct list_head attachments; -+ -+ char name[VC_SM_MAX_NAME_LEN]; -+ -+ int in_use:1; /* Kernel is still using this resource */ -+ -+ enum vc_sm_vpu_mapping_state vpu_state; -+ u32 vc_handle; /* VideoCore handle for this buffer */ -+ -+ /* DMABUF related fields */ -+ struct dma_buf *import_dma_buf; -+ struct dma_buf *dma_buf; -+ struct dma_buf_attachment *attach; -+ struct sg_table *sgt; -+ dma_addr_t dma_addr; -+ -+ struct vc_sm_privdata_t *private; -+}; -+ -+#endif ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c -@@ -0,0 +1,498 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * VideoCore Shared Memory CMA allocator -+ * -+ * Copyright: 2018, Raspberry Pi (Trading) Ltd -+ * Copyright 2011-2012 Broadcom Corporation. All rights reserved. -+ * -+ * Based on vmcs_sm driver from Broadcom Corporation. -+ * -+ */ -+ -+/* ---- Include Files ----------------------------------------------------- */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "vc_sm_cma_vchi.h" -+ -+#define VC_SM_VER 1 -+#define VC_SM_MIN_VER 0 -+ -+/* ---- Private Constants and Types -------------------------------------- */ -+ -+/* Command blocks come from a pool */ -+#define SM_MAX_NUM_CMD_RSP_BLKS 32 -+ -+struct sm_cmd_rsp_blk { -+ struct list_head head; /* To create lists */ -+ /* To be signaled when the response is there */ -+ struct completion cmplt; -+ -+ u16 id; -+ u16 length; -+ -+ u8 msg[VC_SM_MAX_MSG_LEN]; -+ -+ uint32_t wait:1; -+ uint32_t sent:1; -+ uint32_t alloc:1; -+ -+}; -+ -+struct sm_instance { -+ u32 num_connections; -+ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; -+ struct task_struct *io_thread; -+ struct completion io_cmplt; -+ -+ vpu_event_cb vpu_event; -+ -+ /* Mutex over the following lists */ -+ struct mutex lock; -+ u32 trans_id; -+ struct list_head cmd_list; -+ struct list_head rsp_list; -+ struct list_head dead_list; -+ -+ struct sm_cmd_rsp_blk free_blk[SM_MAX_NUM_CMD_RSP_BLKS]; -+ -+ /* Mutex over the free_list */ -+ struct mutex free_lock; -+ struct list_head free_list; -+ -+ struct semaphore free_sema; -+ -+}; -+ -+/* ---- Private Variables ------------------------------------------------ */ -+ -+/* ---- Private Function Prototypes -------------------------------------- */ -+ -+/* ---- Private Functions ------------------------------------------------ */ -+static int -+bcm2835_vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle, -+ void *data, -+ unsigned int size) -+{ -+ return vchi_queue_kernel_message(handle, -+ data, -+ size); -+} -+ -+static struct -+sm_cmd_rsp_blk *vc_vchi_cmd_create(struct sm_instance *instance, -+ enum vc_sm_msg_type id, void *msg, -+ u32 size, int wait) -+{ -+ struct sm_cmd_rsp_blk *blk; -+ struct vc_sm_msg_hdr_t *hdr; -+ -+ if (down_interruptible(&instance->free_sema)) { -+ blk = kmalloc(sizeof(*blk), GFP_KERNEL); -+ if (!blk) -+ return NULL; -+ -+ blk->alloc = 1; -+ init_completion(&blk->cmplt); -+ } else { -+ mutex_lock(&instance->free_lock); -+ blk = -+ list_first_entry(&instance->free_list, -+ struct sm_cmd_rsp_blk, head); -+ list_del(&blk->head); -+ mutex_unlock(&instance->free_lock); -+ } -+ -+ blk->sent = 0; -+ blk->wait = wait; -+ blk->length = sizeof(*hdr) + size; -+ -+ hdr = (struct vc_sm_msg_hdr_t *)blk->msg; -+ hdr->type = id; -+ mutex_lock(&instance->lock); -+ instance->trans_id++; -+ /* -+ * Retain the top bit for identifying asynchronous events, or VPU cmds. -+ */ -+ instance->trans_id &= ~0x80000000; -+ hdr->trans_id = instance->trans_id; -+ blk->id = instance->trans_id; -+ mutex_unlock(&instance->lock); -+ -+ if (size) -+ memcpy(hdr->body, msg, size); -+ -+ return blk; -+} -+ -+static void -+vc_vchi_cmd_delete(struct sm_instance *instance, struct sm_cmd_rsp_blk *blk) -+{ -+ if (blk->alloc) { -+ kfree(blk); -+ return; -+ } -+ -+ mutex_lock(&instance->free_lock); -+ list_add(&blk->head, &instance->free_list); -+ mutex_unlock(&instance->free_lock); -+ up(&instance->free_sema); -+} -+ -+static void vc_sm_cma_vchi_rx_ack(struct sm_instance *instance, -+ struct sm_cmd_rsp_blk *cmd, -+ struct vc_sm_result_t *reply, -+ u32 reply_len) -+{ -+ mutex_lock(&instance->lock); -+ list_for_each_entry(cmd, -+ &instance->rsp_list, -+ head) { -+ if (cmd->id == reply->trans_id) -+ break; -+ } -+ mutex_unlock(&instance->lock); -+ -+ if (&cmd->head == &instance->rsp_list) { -+ //pr_debug("%s: received response %u, throw away...", -+ pr_err("%s: received response %u, throw away...", -+ __func__, -+ reply->trans_id); -+ } else if (reply_len > sizeof(cmd->msg)) { -+ pr_err("%s: reply too big (%u) %u, throw away...", -+ __func__, reply_len, -+ reply->trans_id); -+ } else { -+ memcpy(cmd->msg, reply, -+ reply_len); -+ complete(&cmd->cmplt); -+ } -+} -+ -+static int vc_sm_cma_vchi_videocore_io(void *arg) -+{ -+ struct sm_instance *instance = arg; -+ struct sm_cmd_rsp_blk *cmd = NULL, *cmd_tmp; -+ struct vc_sm_result_t *reply; -+ u32 reply_len; -+ s32 status; -+ int svc_use = 1; -+ -+ while (1) { -+ if (svc_use) -+ vchi_service_release(instance->vchi_handle[0]); -+ svc_use = 0; -+ if (!wait_for_completion_interruptible(&instance->io_cmplt)) { -+ vchi_service_use(instance->vchi_handle[0]); -+ svc_use = 1; -+ -+ do { -+ /* -+ * Get new command and move it to response list -+ */ -+ mutex_lock(&instance->lock); -+ if (list_empty(&instance->cmd_list)) { -+ /* no more commands to process */ -+ mutex_unlock(&instance->lock); -+ break; -+ } -+ cmd = -+ list_first_entry(&instance->cmd_list, -+ struct sm_cmd_rsp_blk, -+ head); -+ list_move(&cmd->head, &instance->rsp_list); -+ cmd->sent = 1; -+ mutex_unlock(&instance->lock); -+ -+ /* Send the command */ -+ status = bcm2835_vchi_msg_queue( -+ instance->vchi_handle[0], -+ cmd->msg, cmd->length); -+ if (status) { -+ pr_err("%s: failed to queue message (%d)", -+ __func__, status); -+ } -+ -+ /* If no reply is needed then we're done */ -+ if (!cmd->wait) { -+ mutex_lock(&instance->lock); -+ list_del(&cmd->head); -+ mutex_unlock(&instance->lock); -+ vc_vchi_cmd_delete(instance, cmd); -+ continue; -+ } -+ -+ if (status) { -+ complete(&cmd->cmplt); -+ continue; -+ } -+ -+ } while (1); -+ -+ while (!vchi_msg_peek(instance->vchi_handle[0], -+ (void **)&reply, &reply_len, -+ VCHI_FLAGS_NONE)) { -+ if (reply->trans_id & 0x80000000) { -+ /* Async event or cmd from the VPU */ -+ if (instance->vpu_event) -+ instance->vpu_event( -+ instance, reply, -+ reply_len); -+ } else { -+ vc_sm_cma_vchi_rx_ack(instance, cmd, -+ reply, reply_len); -+ } -+ -+ vchi_msg_remove(instance->vchi_handle[0]); -+ } -+ -+ /* Go through the dead list and free them */ -+ mutex_lock(&instance->lock); -+ list_for_each_entry_safe(cmd, cmd_tmp, -+ &instance->dead_list, head) { -+ list_del(&cmd->head); -+ vc_vchi_cmd_delete(instance, cmd); -+ } -+ mutex_unlock(&instance->lock); -+ } -+ } -+ -+ return 0; -+} -+ -+static void vc_sm_cma_vchi_callback(void *param, -+ const VCHI_CALLBACK_REASON_T reason, -+ void *msg_handle) -+{ -+ struct sm_instance *instance = param; -+ -+ (void)msg_handle; -+ -+ switch (reason) { -+ case VCHI_CALLBACK_MSG_AVAILABLE: -+ complete(&instance->io_cmplt); -+ break; -+ -+ case VCHI_CALLBACK_SERVICE_CLOSED: -+ pr_info("%s: service CLOSED!!", __func__); -+ default: -+ break; -+ } -+} -+ -+struct sm_instance *vc_sm_cma_vchi_init(VCHI_INSTANCE_T vchi_instance, -+ unsigned int num_connections, -+ vpu_event_cb vpu_event) -+{ -+ u32 i; -+ struct sm_instance *instance; -+ int status; -+ -+ pr_debug("%s: start", __func__); -+ -+ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { -+ pr_err("%s: unsupported number of connections %u (max=%u)", -+ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); -+ -+ goto err_null; -+ } -+ /* Allocate memory for this instance */ -+ instance = kzalloc(sizeof(*instance), GFP_KERNEL); -+ -+ /* Misc initialisations */ -+ mutex_init(&instance->lock); -+ init_completion(&instance->io_cmplt); -+ INIT_LIST_HEAD(&instance->cmd_list); -+ INIT_LIST_HEAD(&instance->rsp_list); -+ INIT_LIST_HEAD(&instance->dead_list); -+ INIT_LIST_HEAD(&instance->free_list); -+ sema_init(&instance->free_sema, SM_MAX_NUM_CMD_RSP_BLKS); -+ mutex_init(&instance->free_lock); -+ for (i = 0; i < SM_MAX_NUM_CMD_RSP_BLKS; i++) { -+ init_completion(&instance->free_blk[i].cmplt); -+ list_add(&instance->free_blk[i].head, &instance->free_list); -+ } -+ -+ /* Open the VCHI service connections */ -+ instance->num_connections = num_connections; -+ for (i = 0; i < num_connections; i++) { -+ SERVICE_CREATION_T params = { -+ .version = VCHI_VERSION_EX(VC_SM_VER, VC_SM_MIN_VER), -+ .service_id = VC_SM_SERVER_NAME, -+ .callback = vc_sm_cma_vchi_callback, -+ .callback_param = instance, -+ }; -+ -+ status = vchi_service_open(vchi_instance, -+ ¶ms, &instance->vchi_handle[i]); -+ if (status) { -+ pr_err("%s: failed to open VCHI service (%d)", -+ __func__, status); -+ -+ goto err_close_services; -+ } -+ } -+ -+ /* Create the thread which takes care of all io to/from videoocore. */ -+ instance->io_thread = kthread_create(&vc_sm_cma_vchi_videocore_io, -+ (void *)instance, "SMIO"); -+ if (!instance->io_thread) { -+ pr_err("%s: failed to create SMIO thread", __func__); -+ -+ goto err_close_services; -+ } -+ instance->vpu_event = vpu_event; -+ set_user_nice(instance->io_thread, -10); -+ wake_up_process(instance->io_thread); -+ -+ pr_debug("%s: success - instance 0x%x", __func__, -+ (unsigned int)instance); -+ return instance; -+ -+err_close_services: -+ for (i = 0; i < instance->num_connections; i++) { -+ if (instance->vchi_handle[i]) -+ vchi_service_close(instance->vchi_handle[i]); -+ } -+ kfree(instance); -+err_null: -+ pr_debug("%s: FAILED", __func__); -+ return NULL; -+} -+ -+int vc_sm_cma_vchi_stop(struct sm_instance **handle) -+{ -+ struct sm_instance *instance; -+ u32 i; -+ -+ if (!handle) { -+ pr_err("%s: invalid pointer to handle %p", __func__, handle); -+ goto lock; -+ } -+ -+ if (!*handle) { -+ pr_err("%s: invalid handle %p", __func__, *handle); -+ goto lock; -+ } -+ -+ instance = *handle; -+ -+ /* Close all VCHI service connections */ -+ for (i = 0; i < instance->num_connections; i++) { -+ s32 success; -+ -+ vchi_service_use(instance->vchi_handle[i]); -+ -+ success = vchi_service_close(instance->vchi_handle[i]); -+ } -+ -+ kfree(instance); -+ -+ *handle = NULL; -+ return 0; -+ -+lock: -+ return -EINVAL; -+} -+ -+static int vc_sm_cma_vchi_send_msg(struct sm_instance *handle, -+ enum vc_sm_msg_type msg_id, void *msg, -+ u32 msg_size, void *result, u32 result_size, -+ u32 *cur_trans_id, u8 wait_reply) -+{ -+ int status = 0; -+ struct sm_instance *instance = handle; -+ struct sm_cmd_rsp_blk *cmd_blk; -+ -+ if (!handle) { -+ pr_err("%s: invalid handle", __func__); -+ return -EINVAL; -+ } -+ if (!msg) { -+ pr_err("%s: invalid msg pointer", __func__); -+ return -EINVAL; -+ } -+ -+ cmd_blk = -+ vc_vchi_cmd_create(instance, msg_id, msg, msg_size, wait_reply); -+ if (!cmd_blk) { -+ pr_err("[%s]: failed to allocate global tracking resource", -+ __func__); -+ return -ENOMEM; -+ } -+ -+ if (cur_trans_id) -+ *cur_trans_id = cmd_blk->id; -+ -+ mutex_lock(&instance->lock); -+ list_add_tail(&cmd_blk->head, &instance->cmd_list); -+ mutex_unlock(&instance->lock); -+ complete(&instance->io_cmplt); -+ -+ if (!wait_reply) -+ /* We're done */ -+ return 0; -+ -+ /* Wait for the response */ -+ if (wait_for_completion_interruptible(&cmd_blk->cmplt)) { -+ mutex_lock(&instance->lock); -+ if (!cmd_blk->sent) { -+ list_del(&cmd_blk->head); -+ mutex_unlock(&instance->lock); -+ vc_vchi_cmd_delete(instance, cmd_blk); -+ return -ENXIO; -+ } -+ -+ list_move(&cmd_blk->head, &instance->dead_list); -+ mutex_unlock(&instance->lock); -+ complete(&instance->io_cmplt); -+ return -EINTR; /* We're done */ -+ } -+ -+ if (result && result_size) { -+ memcpy(result, cmd_blk->msg, result_size); -+ } else { -+ struct vc_sm_result_t *res = -+ (struct vc_sm_result_t *)cmd_blk->msg; -+ status = (res->success == 0) ? 0 : -ENXIO; -+ } -+ -+ mutex_lock(&instance->lock); -+ list_del(&cmd_blk->head); -+ mutex_unlock(&instance->lock); -+ vc_vchi_cmd_delete(instance, cmd_blk); -+ return status; -+} -+ -+int vc_sm_cma_vchi_free(struct sm_instance *handle, struct vc_sm_free_t *msg, -+ u32 *cur_trans_id) -+{ -+ return vc_sm_cma_vchi_send_msg(handle, VC_SM_MSG_TYPE_FREE, -+ msg, sizeof(*msg), 0, 0, cur_trans_id, 0); -+} -+ -+int vc_sm_cma_vchi_import(struct sm_instance *handle, struct vc_sm_import *msg, -+ struct vc_sm_import_result *result, u32 *cur_trans_id) -+{ -+ return vc_sm_cma_vchi_send_msg(handle, VC_SM_MSG_TYPE_IMPORT, -+ msg, sizeof(*msg), result, sizeof(*result), -+ cur_trans_id, 1); -+} -+ -+int vc_sm_cma_vchi_client_version(struct sm_instance *handle, -+ struct vc_sm_version *msg, -+ struct vc_sm_result_t *result, -+ u32 *cur_trans_id) -+{ -+ return vc_sm_cma_vchi_send_msg(handle, VC_SM_MSG_TYPE_CLIENT_VERSION, -+ //msg, sizeof(*msg), result, sizeof(*result), -+ //cur_trans_id, 1); -+ msg, sizeof(*msg), NULL, 0, -+ cur_trans_id, 0); -+} ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.h -@@ -0,0 +1,59 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+ -+/* -+ * VideoCore Shared Memory CMA allocator -+ * -+ * Copyright: 2018, Raspberry Pi (Trading) Ltd -+ * Copyright 2011-2012 Broadcom Corporation. All rights reserved. -+ * -+ * Based on vmcs_sm driver from Broadcom Corporation. -+ * -+ */ -+ -+#ifndef __VC_SM_CMA_VCHI_H__INCLUDED__ -+#define __VC_SM_CMA_VCHI_H__INCLUDED__ -+ -+#include "interface/vchi/vchi.h" -+ -+#include "vc_sm_defs.h" -+ -+/* -+ * Forward declare. -+ */ -+struct sm_instance; -+ -+typedef void (*vpu_event_cb)(struct sm_instance *instance, -+ struct vc_sm_result_t *reply, int reply_len); -+ -+/* -+ * Initialize the shared memory service, opens up vchi connection to talk to it. -+ */ -+struct sm_instance *vc_sm_cma_vchi_init(VCHI_INSTANCE_T vchi_instance, -+ unsigned int num_connections, -+ vpu_event_cb vpu_event); -+ -+/* -+ * Terminates the shared memory service. -+ */ -+int vc_sm_cma_vchi_stop(struct sm_instance **handle); -+ -+/* -+ * Ask the shared memory service to free up some memory that was previously -+ * allocated by the vc_sm_cma_vchi_alloc function call. -+ */ -+int vc_sm_cma_vchi_free(struct sm_instance *handle, struct vc_sm_free_t *msg, -+ u32 *cur_trans_id); -+ -+/* -+ * Import a contiguous block of memory and wrap it in a GPU MEM_HANDLE_T. -+ */ -+int vc_sm_cma_vchi_import(struct sm_instance *handle, struct vc_sm_import *msg, -+ struct vc_sm_import_result *result, -+ u32 *cur_trans_id); -+ -+int vc_sm_cma_vchi_client_version(struct sm_instance *handle, -+ struct vc_sm_version *msg, -+ struct vc_sm_result_t *result, -+ u32 *cur_trans_id); -+ -+#endif /* __VC_SM_CMA_VCHI_H__INCLUDED__ */ ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_defs.h -@@ -0,0 +1,298 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+ -+/* -+ * VideoCore Shared Memory CMA allocator -+ * -+ * Copyright: 2018, Raspberry Pi (Trading) Ltd -+ * -+ * Based on vc_sm_defs.h from the vmcs_sm driver Copyright Broadcom Corporation. -+ * All IPC messages are copied across to this file, even if the vc-sm-cma -+ * driver is not currently using them. -+ * -+ **************************************************************************** -+ */ -+ -+#ifndef __VC_SM_DEFS_H__INCLUDED__ -+#define __VC_SM_DEFS_H__INCLUDED__ -+ -+/* FourCC code used for VCHI connection */ -+#define VC_SM_SERVER_NAME MAKE_FOURCC("SMEM") -+ -+/* Maximum message length */ -+#define VC_SM_MAX_MSG_LEN (sizeof(union vc_sm_msg_union_t) + \ -+ sizeof(struct vc_sm_msg_hdr_t)) -+#define VC_SM_MAX_RSP_LEN (sizeof(union vc_sm_msg_union_t)) -+ -+/* Resource name maximum size */ -+#define VC_SM_RESOURCE_NAME 32 -+ -+/* -+ * Version to be reported to the VPU -+ * VPU assumes 0 (aka 1) which does not require the released callback, nor -+ * expect the client to handle VC_MEM_REQUESTS. -+ * Version 2 requires the released callback, and must support VC_MEM_REQUESTS. -+ */ -+#define VC_SM_PROTOCOL_VERSION 2 -+ -+enum vc_sm_msg_type { -+ /* Message types supported for HOST->VC direction */ -+ -+ /* Allocate shared memory block */ -+ VC_SM_MSG_TYPE_ALLOC, -+ /* Lock allocated shared memory block */ -+ VC_SM_MSG_TYPE_LOCK, -+ /* Unlock allocated shared memory block */ -+ VC_SM_MSG_TYPE_UNLOCK, -+ /* Unlock allocated shared memory block, do not answer command */ -+ VC_SM_MSG_TYPE_UNLOCK_NOANS, -+ /* Free shared memory block */ -+ VC_SM_MSG_TYPE_FREE, -+ /* Resize a shared memory block */ -+ VC_SM_MSG_TYPE_RESIZE, -+ /* Walk the allocated shared memory block(s) */ -+ VC_SM_MSG_TYPE_WALK_ALLOC, -+ -+ /* A previously applied action will need to be reverted */ -+ VC_SM_MSG_TYPE_ACTION_CLEAN, -+ -+ /* -+ * Import a physical address and wrap into a MEM_HANDLE_T. -+ * Release with VC_SM_MSG_TYPE_FREE. -+ */ -+ VC_SM_MSG_TYPE_IMPORT, -+ /* -+ *Tells VC the protocol version supported by this client. -+ * 2 supports the async/cmd messages from the VPU for final release -+ * of memory, and for VC allocations. -+ */ -+ VC_SM_MSG_TYPE_CLIENT_VERSION, -+ /* Response to VC request for memory */ -+ VC_SM_MSG_TYPE_VC_MEM_REQUEST_REPLY, -+ -+ /* -+ * Asynchronous/cmd messages supported for VC->HOST direction. -+ * Signalled by setting the top bit in vc_sm_result_t trans_id. -+ */ -+ -+ /* -+ * VC has finished with an imported memory allocation. -+ * Release any Linux reference counts on the underlying block. -+ */ -+ VC_SM_MSG_TYPE_RELEASED, -+ /* VC request for memory */ -+ VC_SM_MSG_TYPE_VC_MEM_REQUEST, -+ -+ VC_SM_MSG_TYPE_MAX -+}; -+ -+/* Type of memory to be allocated */ -+enum vc_sm_alloc_type_t { -+ VC_SM_ALLOC_CACHED, -+ VC_SM_ALLOC_NON_CACHED, -+}; -+ -+/* Message header for all messages in HOST->VC direction */ -+struct vc_sm_msg_hdr_t { -+ u32 type; -+ u32 trans_id; -+ u8 body[0]; -+ -+}; -+ -+/* Request to allocate memory (HOST->VC) */ -+struct vc_sm_alloc_t { -+ /* type of memory to allocate */ -+ enum vc_sm_alloc_type_t type; -+ /* byte amount of data to allocate per unit */ -+ u32 base_unit; -+ /* number of unit to allocate */ -+ u32 num_unit; -+ /* alignment to be applied on allocation */ -+ u32 alignment; -+ /* identity of who allocated this block */ -+ u32 allocator; -+ /* resource name (for easier tracking on vc side) */ -+ char name[VC_SM_RESOURCE_NAME]; -+ -+}; -+ -+/* Result of a requested memory allocation (VC->HOST) */ -+struct vc_sm_alloc_result_t { -+ /* Transaction identifier */ -+ u32 trans_id; -+ -+ /* Resource handle */ -+ u32 res_handle; -+ /* Pointer to resource buffer */ -+ u32 res_mem; -+ /* Resource base size (bytes) */ -+ u32 res_base_size; -+ /* Resource number */ -+ u32 res_num; -+ -+}; -+ -+/* Request to free a previously allocated memory (HOST->VC) */ -+struct vc_sm_free_t { -+ /* Resource handle (returned from alloc) */ -+ u32 res_handle; -+ /* Resource buffer (returned from alloc) */ -+ u32 res_mem; -+ -+}; -+ -+/* Request to lock a previously allocated memory (HOST->VC) */ -+struct vc_sm_lock_unlock_t { -+ /* Resource handle (returned from alloc) */ -+ u32 res_handle; -+ /* Resource buffer (returned from alloc) */ -+ u32 res_mem; -+ -+}; -+ -+/* Request to resize a previously allocated memory (HOST->VC) */ -+struct vc_sm_resize_t { -+ /* Resource handle (returned from alloc) */ -+ u32 res_handle; -+ /* Resource buffer (returned from alloc) */ -+ u32 res_mem; -+ /* Resource *new* size requested (bytes) */ -+ u32 res_new_size; -+ -+}; -+ -+/* Result of a requested memory lock (VC->HOST) */ -+struct vc_sm_lock_result_t { -+ /* Transaction identifier */ -+ u32 trans_id; -+ -+ /* Resource handle */ -+ u32 res_handle; -+ /* Pointer to resource buffer */ -+ u32 res_mem; -+ /* -+ * Pointer to former resource buffer if the memory -+ * was reallocated -+ */ -+ u32 res_old_mem; -+ -+}; -+ -+/* Generic result for a request (VC->HOST) */ -+struct vc_sm_result_t { -+ /* Transaction identifier */ -+ u32 trans_id; -+ -+ s32 success; -+ -+}; -+ -+/* Request to revert a previously applied action (HOST->VC) */ -+struct vc_sm_action_clean_t { -+ /* Action of interest */ -+ enum vc_sm_msg_type res_action; -+ /* Transaction identifier for the action of interest */ -+ u32 action_trans_id; -+ -+}; -+ -+/* Request to remove all data associated with a given allocator (HOST->VC) */ -+struct vc_sm_free_all_t { -+ /* Allocator identifier */ -+ u32 allocator; -+}; -+ -+/* Request to import memory (HOST->VC) */ -+struct vc_sm_import { -+ /* type of memory to allocate */ -+ enum vc_sm_alloc_type_t type; -+ /* pointer to the VC (ie physical) address of the allocated memory */ -+ u32 addr; -+ /* size of buffer */ -+ u32 size; -+ /* opaque handle returned in RELEASED messages */ -+ u32 kernel_id; -+ /* Allocator identifier */ -+ u32 allocator; -+ /* resource name (for easier tracking on vc side) */ -+ char name[VC_SM_RESOURCE_NAME]; -+}; -+ -+/* Result of a requested memory import (VC->HOST) */ -+struct vc_sm_import_result { -+ /* Transaction identifier */ -+ u32 trans_id; -+ -+ /* Resource handle */ -+ u32 res_handle; -+}; -+ -+/* Notification that VC has finished with an allocation (VC->HOST) */ -+struct vc_sm_released { -+ /* cmd type / trans_id */ -+ u32 cmd; -+ -+ /* pointer to the VC (ie physical) address of the allocated memory */ -+ u32 addr; -+ /* size of buffer */ -+ u32 size; -+ /* opaque handle returned in RELEASED messages */ -+ u32 kernel_id; -+ u32 vc_handle; -+}; -+ -+/* -+ * Client informing VC as to the protocol version it supports. -+ * >=2 requires the released callback, and supports VC asking for memory. -+ * Failure means that the firmware doesn't support this call, and therefore the -+ * client should either fail, or NOT rely on getting the released callback. -+ */ -+struct vc_sm_version { -+ u32 version; -+}; -+ -+/* Request FROM VideoCore for some memory */ -+struct vc_sm_vc_mem_request { -+ /* cmd type */ -+ u32 cmd; -+ -+ /* trans_id (from VPU) */ -+ u32 trans_id; -+ /* size of buffer */ -+ u32 size; -+ /* alignment of buffer */ -+ u32 align; -+ /* resource name (for easier tracking) */ -+ char name[VC_SM_RESOURCE_NAME]; -+}; -+ -+/* Response from the kernel to provide the VPU with some memory */ -+struct vc_sm_vc_mem_request_result { -+ /* Transaction identifier for the VPU */ -+ u32 trans_id; -+ /* pointer to the physical address of the allocated memory */ -+ u32 addr; -+ /* opaque handle returned in RELEASED messages */ -+ u32 kernel_id; -+}; -+ -+/* Union of ALL messages */ -+union vc_sm_msg_union_t { -+ struct vc_sm_alloc_t alloc; -+ struct vc_sm_alloc_result_t alloc_result; -+ struct vc_sm_free_t free; -+ struct vc_sm_lock_unlock_t lock_unlock; -+ struct vc_sm_action_clean_t action_clean; -+ struct vc_sm_resize_t resize; -+ struct vc_sm_lock_result_t lock_result; -+ struct vc_sm_result_t result; -+ struct vc_sm_free_all_t free_all; -+ struct vc_sm_import import; -+ struct vc_sm_import_result import_result; -+ struct vc_sm_version version; -+ struct vc_sm_released released; -+ struct vc_sm_vc_mem_request vc_request; -+ struct vc_sm_vc_mem_request_result vc_request_result; -+}; -+ -+#endif /* __VC_SM_DEFS_H__INCLUDED__ */ ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h -@@ -0,0 +1,28 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+ -+/* -+ * VideoCore Shared Memory CMA allocator -+ * -+ * Copyright: 2018, Raspberry Pi (Trading) Ltd -+ * -+ * Based on vc_sm_defs.h from the vmcs_sm driver Copyright Broadcom Corporation. -+ * -+ */ -+ -+#ifndef __VC_SM_KNL_H__INCLUDED__ -+#define __VC_SM_KNL_H__INCLUDED__ -+ -+#if !defined(__KERNEL__) -+#error "This interface is for kernel use only..." -+#endif -+ -+/* Free a previously allocated or imported shared memory handle and block. */ -+int vc_sm_cma_free(int handle); -+ -+/* Get an internal resource handle mapped from the external one. */ -+int vc_sm_cma_int_handle(int handle); -+ -+/* Import a block of memory into the GPU space. */ -+int vc_sm_cma_import_dmabuf(struct dma_buf *dmabuf, int *handle); -+ -+#endif /* __VC_SM_KNL_H__INCLUDED__ */ diff --git a/target/linux/brcm2708/patches-4.19/950-0273-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch b/target/linux/brcm2708/patches-4.19/950-0273-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch new file mode 100644 index 0000000000..761b6dcfcf --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0273-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch @@ -0,0 +1,44 @@ +From 020ee4d0d438b830ee40da8d9d3414de156a11e7 Mon Sep 17 00:00:00 2001 +From: Joshua Emele +Date: Wed, 7 Nov 2018 16:07:40 -0800 +Subject: [PATCH] lan78xx: Debounce link events to minimize poll storm + +The bInterval is set to 4 (i.e. 8 microframes => 1ms) and the only bit +that the driver pays attention to is "link was reset". If there's a +flapping status bit in that endpoint data, (such as if PHY negotiation +needs a few tries to get a stable link) then polling at a slower rate +would act as a de-bounce. + +See: https://github.com/raspberrypi/linux/issues/2447 +--- + drivers/net/usb/lan78xx.c | 12 +++++++++++- + 1 file changed, 11 insertions(+), 1 deletion(-) + +--- a/drivers/net/usb/lan78xx.c ++++ b/drivers/net/usb/lan78xx.c +@@ -448,6 +448,11 @@ static bool enable_tso; + module_param(enable_tso, bool, 0644); + MODULE_PARM_DESC(enable_tso, "Enables TCP segmentation offload"); + ++#define INT_URB_MICROFRAMES_PER_MS 8 ++static int int_urb_interval_ms = 8; ++module_param(int_urb_interval_ms, int, 0); ++MODULE_PARM_DESC(int_urb_interval_ms, "Override usb interrupt urb interval"); ++ + static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data) + { + u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL); +@@ -3824,7 +3829,12 @@ static int lan78xx_probe(struct usb_inte + dev->pipe_intr = usb_rcvintpipe(dev->udev, + dev->ep_intr->desc.bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK); +- period = dev->ep_intr->desc.bInterval; ++ if (int_urb_interval_ms <= 0) ++ period = dev->ep_intr->desc.bInterval; ++ else ++ period = int_urb_interval_ms * INT_URB_MICROFRAMES_PER_MS; ++ ++ netif_notice(dev, probe, netdev, "int urb period %d\n", period); + + maxp = usb_maxpacket(dev->udev, dev->pipe_intr, 0); + buf = kmalloc(maxp, GFP_KERNEL); diff --git a/target/linux/brcm2708/patches-4.19/950-0273-staging-vc-sm-cma-Fixup-driver-for-older-VCHI-APIs.patch b/target/linux/brcm2708/patches-4.19/950-0273-staging-vc-sm-cma-Fixup-driver-for-older-VCHI-APIs.patch deleted file mode 100644 index 7356e611f5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0273-staging-vc-sm-cma-Fixup-driver-for-older-VCHI-APIs.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 9eb40722f3ef0d338ed97667a7391f3d74812332 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 30 Oct 2018 11:42:48 +0000 -Subject: [PATCH 273/806] staging: vc-sm-cma: Fixup driver for older VCHI APIs - -Original patch was based off staging which included some cleanups -of the VCHI APIs. Those aren't present here, so switch back to -the older API. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 2 +- - drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 5 +++++ - 2 files changed, 6 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -632,7 +632,7 @@ static void vc_sm_connected_init(void) - goto err_free_mem; - } - -- ret = vchi_connect(vchi_instance); -+ ret = vchi_connect(NULL, 0, vchi_instance); - if (ret) { - pr_err("[%s]: failed to connect VCHI instance (ret=%d)\n", - __func__, ret); ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c -@@ -325,8 +325,13 @@ struct sm_instance *vc_sm_cma_vchi_init( - SERVICE_CREATION_T params = { - .version = VCHI_VERSION_EX(VC_SM_VER, VC_SM_MIN_VER), - .service_id = VC_SM_SERVER_NAME, -+ .rx_fifo_size = 0, -+ .tx_fifo_size = 0, - .callback = vc_sm_cma_vchi_callback, - .callback_param = instance, -+ .want_unaligned_bulk_rx = 0, -+ .want_unaligned_bulk_tx = 0, -+ .want_crc = 0 - }; - - status = vchi_service_open(vchi_instance, diff --git a/target/linux/brcm2708/patches-4.19/950-0274-ASoC-Add-support-for-AudioSense-Pi-add-on-soundcard.patch b/target/linux/brcm2708/patches-4.19/950-0274-ASoC-Add-support-for-AudioSense-Pi-add-on-soundcard.patch new file mode 100644 index 0000000000..1ab87d5a54 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0274-ASoC-Add-support-for-AudioSense-Pi-add-on-soundcard.patch @@ -0,0 +1,320 @@ +From 5705594ae56861cb63e7a3de1854e29ad1e830fd Mon Sep 17 00:00:00 2001 +From: b-ak +Date: Thu, 3 Jan 2019 00:01:08 +0530 +Subject: [PATCH] ASoC: Add support for AudioSense-Pi add-on soundcard + +AudioSense-Pi is a RPi HAT based on a TI's TLV320AIC32x4 stereo codec + +This hardware provides multiple audio I/O capabilities to the RPi. +The codec connects to the RPi's SoC through the I2S Bus. + +The following devices can be connected through a 3.5mm jack + 1. Line-In: Plain old audio in from mobile phones, PCs, etc., + 2. Mic-In: Connect a microphone + 3. Line-Out: Connect the output to a speaker + 4. Headphones: Connect a Headphone w or w/o microphones + +Multiple Inputs: + It supports the following combinations + 1. Two stereo Line-Inputs and a microphone + 2. One stereo Line-Input and two microphones + 3. Two stereo Line-Inputs, a microphone and + one mono line-input (with h/w hack) + 4. One stereo Line-Input, two microphones and + one mono line-input (with h/w hack) + +Multiple Outputs: + Audio output can be routed to the headphones or + speakers (with additional hardware) + +Signed-off-by: b-ak +--- + sound/soc/bcm/Kconfig | 7 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/audiosense-pi.c | 246 ++++++++++++++++++++++++++++++++++ + 3 files changed, 255 insertions(+) + create mode 100644 sound/soc/bcm/audiosense-pi.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -137,6 +137,13 @@ config SND_AUDIOINJECTOR_OCTO_SOUNDCARD + help + Say Y or M if you want to add support for audioinjector.net octo add on + ++config SND_AUDIOSENSE_PI ++ tristate "Support for AudioSense Add-On Soundcard" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_TLV320AIC32X4_I2C ++ help ++ Say Y or M if you want to add support for tlv320aic32x4 add-on ++ + config SND_DIGIDAC1_SOUNDCARD + tristate "Support for Red Rocks Audio DigiDAC1" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -20,6 +20,7 @@ snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o ++snd-soc-audiosense-pi-objs := audiosense-pi.o + snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o + snd-soc-dionaudio-loco-objs := dionaudio_loco.o + snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o +@@ -41,6 +42,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o ++obj-$(CONFIG_SND_AUDIOSENSE_PI) += snd-soc-audiosense-pi.o + obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o +--- /dev/null ++++ b/sound/soc/bcm/audiosense-pi.c +@@ -0,0 +1,246 @@ ++/* ++ * ASoC Driver for AudioSense add on soundcard ++ * Author: ++ * Bhargav A K ++ * Copyright 2017 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "../codecs/tlv320aic32x4.h" ++ ++#define AIC32X4_SYSCLK_XTAL 0x00 ++ ++/* ++ * Setup Codec Sample Rates and Channels ++ * Supported Rates: ++ * 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, ++ */ ++static const unsigned int audiosense_pi_rate[] = { ++ 48000, ++}; ++ ++static struct snd_pcm_hw_constraint_list audiosense_constraints_rates = { ++ .list = audiosense_pi_rate, ++ .count = ARRAY_SIZE(audiosense_pi_rate), ++}; ++ ++static const unsigned int audiosense_pi_channels[] = { ++ 2, ++}; ++ ++static struct snd_pcm_hw_constraint_list audiosense_constraints_ch = { ++ .count = ARRAY_SIZE(audiosense_pi_channels), ++ .list = audiosense_pi_channels, ++ .mask = 0, ++}; ++ ++/* Setup DAPM widgets and paths */ ++static const struct snd_soc_dapm_widget audiosense_pi_dapm_widgets[] = { ++ SND_SOC_DAPM_HP("Headphone Jack", NULL), ++ SND_SOC_DAPM_LINE("Line Out", NULL), ++ SND_SOC_DAPM_LINE("Line In", NULL), ++ SND_SOC_DAPM_INPUT("CM_L"), ++ SND_SOC_DAPM_INPUT("CM_R"), ++}; ++ ++static const struct snd_soc_dapm_route audiosense_pi_audio_map[] = { ++ /* Line Inputs are connected to ++ * (IN1_L | IN1_R) ++ * (IN2_L | IN2_R) ++ * (IN3_L | IN3_R) ++ */ ++ {"IN1_L", NULL, "Line In"}, ++ {"IN1_R", NULL, "Line In"}, ++ {"IN2_L", NULL, "Line In"}, ++ {"IN2_R", NULL, "Line In"}, ++ {"IN3_L", NULL, "Line In"}, ++ {"IN3_R", NULL, "Line In"}, ++ ++ /* Mic is connected to IN2_L and IN2_R */ ++ {"Left ADC", NULL, "Mic Bias"}, ++ {"Right ADC", NULL, "Mic Bias"}, ++ ++ /* Headphone connected to HPL, HPR */ ++ {"Headphone Jack", NULL, "HPL"}, ++ {"Headphone Jack", NULL, "HPR"}, ++ ++ /* Speakers connected to LOL and LOR */ ++ {"Line Out", NULL, "LOL"}, ++ {"Line Out", NULL, "LOR"}, ++}; ++ ++static int audiosense_pi_card_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ /* TODO: init of the codec specific dapm data, ignore suspend/resume */ ++ struct snd_soc_component *component = rtd->codec_dai->component; ++ ++ snd_soc_component_update_bits(component, AIC32X4_MICBIAS, 0x78, ++ AIC32X4_MICBIAS_LDOIN | ++ AIC32X4_MICBIAS_2075V); ++ snd_soc_component_update_bits(component, AIC32X4_PWRCFG, 0x08, ++ AIC32X4_AVDDWEAKDISABLE); ++ snd_soc_component_update_bits(component, AIC32X4_LDOCTL, 0x01, ++ AIC32X4_LDOCTLEN); ++ ++ return 0; ++} ++ ++static int audiosense_pi_card_hw_params( ++ struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ int ret = 0; ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ ++ /* Set the codec system clock, there is a 12 MHz XTAL on the board */ ++ ret = snd_soc_dai_set_sysclk(codec_dai, AIC32X4_SYSCLK_XTAL, ++ 12000000, SND_SOC_CLOCK_IN); ++ if (ret) { ++ dev_err(rtd->card->dev, ++ "could not set codec driver clock params\n"); ++ return ret; ++ } ++ return 0; ++} ++ ++static int audiosense_pi_card_startup(struct snd_pcm_substream *substream) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ ++ /* ++ * Set codec to 48Khz Sampling, Stereo I/O and 16 bit audio ++ */ ++ runtime->hw.channels_max = 2; ++ snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, ++ &audiosense_constraints_ch); ++ ++ runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE; ++ snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16); ++ ++ ++ snd_pcm_hw_constraint_list(substream->runtime, 0, ++ SNDRV_PCM_HW_PARAM_RATE, ++ &audiosense_constraints_rates); ++ return 0; ++} ++ ++static struct snd_soc_ops audiosense_pi_card_ops = { ++ .startup = audiosense_pi_card_startup, ++ .hw_params = audiosense_pi_card_hw_params, ++}; ++ ++static struct snd_soc_dai_link audiosense_pi_card_dai[] = { ++ { ++ .name = "TLV320AIC3204 Audio", ++ .stream_name = "TLV320AIC3204 Hifi Audio", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "tlv320aic32x4-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "tlv320aic32x4.1-0018", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &audiosense_pi_card_ops, ++ .init = audiosense_pi_card_init, ++ }, ++}; ++ ++static struct snd_soc_card audiosense_pi_card = { ++ .name = "audiosense-pi", ++ .driver_name = "audiosense-pi", ++ .dai_link = audiosense_pi_card_dai, ++ .owner = THIS_MODULE, ++ .num_links = ARRAY_SIZE(audiosense_pi_card_dai), ++ .dapm_widgets = audiosense_pi_dapm_widgets, ++ .num_dapm_widgets = ARRAY_SIZE(audiosense_pi_dapm_widgets), ++ .dapm_routes = audiosense_pi_audio_map, ++ .num_dapm_routes = ARRAY_SIZE(audiosense_pi_audio_map), ++}; ++ ++static int audiosense_pi_card_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ struct snd_soc_card *card = &audiosense_pi_card; ++ struct snd_soc_dai_link *dai = &audiosense_pi_card_dai[0]; ++ struct device_node *i2s_node = pdev->dev.of_node; ++ ++ card->dev = &pdev->dev; ++ ++ if (!dai) { ++ dev_err(&pdev->dev, "DAI not found. Missing or Invalid\n"); ++ return -EINVAL; ++ } ++ ++ i2s_node = of_parse_phandle(pdev->dev.of_node, "i2s-controller", 0); ++ if (!i2s_node) { ++ dev_err(&pdev->dev, ++ "Property 'i2s-controller' missing or invalid\n"); ++ return -EINVAL; ++ } ++ ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ ++ of_node_put(i2s_node); ++ ++ ret = snd_soc_register_card(card); ++ if (ret && ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int audiosense_pi_card_remove(struct platform_device *pdev) ++{ ++ struct snd_soc_card *card = platform_get_drvdata(pdev); ++ ++ return snd_soc_unregister_card(card); ++ ++} ++ ++static const struct of_device_id audiosense_pi_card_of_match[] = { ++ { .compatible = "as,audiosense-pi", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, audiosense_pi_card_of_match); ++ ++static struct platform_driver audiosense_pi_card_driver = { ++ .driver = { ++ .name = "audiosense-snd-card", ++ .owner = THIS_MODULE, ++ .of_match_table = audiosense_pi_card_of_match, ++ }, ++ .probe = audiosense_pi_card_probe, ++ .remove = audiosense_pi_card_remove, ++}; ++ ++module_platform_driver(audiosense_pi_card_driver); ++ ++MODULE_AUTHOR("Bhargav AK "); ++MODULE_DESCRIPTION("ASoC Driver for TLV320AIC3204 Audio"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:audiosense-pi"); ++ diff --git a/target/linux/brcm2708/patches-4.19/950-0274-staging-vc04_services-Use-vc-sm-cma-to-support-zero-.patch b/target/linux/brcm2708/patches-4.19/950-0274-staging-vc04_services-Use-vc-sm-cma-to-support-zero-.patch deleted file mode 100644 index 22ca1de657..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0274-staging-vc04_services-Use-vc-sm-cma-to-support-zero-.patch +++ /dev/null @@ -1,163 +0,0 @@ -From bcb0dccc1f02ed3dd01834ca0e35c4043df8988e Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 25 Sep 2018 16:07:55 +0100 -Subject: [PATCH 274/806] staging: vc04_services: Use vc-sm-cma to support zero - copy - -With the vc-sm-cma driver we can support zero copy of buffers between -the kernel and VPU. Add this support to vchiq-mmal. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/vchiq-mmal/Kconfig | 1 + - .../vc04_services/vchiq-mmal/mmal-common.h | 4 ++ - .../vc04_services/vchiq-mmal/mmal-vchiq.c | 66 ++++++++++++++++++- - .../vc04_services/vchiq-mmal/mmal-vchiq.h | 1 + - 4 files changed, 70 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/Kconfig -+++ b/drivers/staging/vc04_services/vchiq-mmal/Kconfig -@@ -2,6 +2,7 @@ config BCM2835_VCHIQ_MMAL - tristate "BCM2835 MMAL VCHIQ service" - depends on (ARCH_BCM2835 || COMPILE_TEST) - select BCM2835_VCHIQ -+ select BCM_VC_SM_CMA - help - Enables the MMAL API over VCHIQ as used for the - majority of the multimedia services on VideoCore. ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h -@@ -51,6 +51,10 @@ struct mmal_buffer { - - struct mmal_msg_context *msg_context; - -+ struct dma_buf *dma_buf;/* Exported dmabuf fd from videobuf2 */ -+ int vcsm_handle; /* VCSM handle having imported the dmabuf */ -+ u32 vc_handle; /* VC handle to that dmabuf */ -+ - u32 cmd; /* MMAL command. 0=data. */ - unsigned long length; - u32 mmal_flags; ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -27,9 +27,12 @@ - #include - - #include "mmal-common.h" -+#include "mmal-parameters.h" - #include "mmal-vchiq.h" - #include "mmal-msg.h" - -+#include "vc-sm-cma/vc_sm_knl.h" -+ - #define USE_VCHIQ_ARM - #include "interface/vchi/vchi.h" - -@@ -425,8 +428,13 @@ buffer_from_host(struct vchiq_mmal_insta - - /* buffer header */ - m.u.buffer_from_host.buffer_header.cmd = 0; -- m.u.buffer_from_host.buffer_header.data = -- (u32)(unsigned long)buf->buffer; -+ if (port->zero_copy) { -+ m.u.buffer_from_host.buffer_header.data = buf->vc_handle; -+ } else { -+ m.u.buffer_from_host.buffer_header.data = -+ (u32)(unsigned long)buf->buffer; -+ } -+ - m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; - if (port->type == MMAL_PORT_TYPE_OUTPUT) { - m.u.buffer_from_host.buffer_header.length = 0; -@@ -591,6 +599,22 @@ static void buffer_to_host_cb(struct vch - - msg_context->u.bulk.status = msg->h.status; - -+ } else if (msg->u.buffer_from_host.is_zero_copy) { -+ /* -+ * Zero copy buffer, so nothing to do. -+ * Copy buffer info and make callback. -+ */ -+ msg_context->u.bulk.buffer_used = -+ msg->u.buffer_from_host.buffer_header.length; -+ msg_context->u.bulk.mmal_flags = -+ msg->u.buffer_from_host.buffer_header.flags; -+ msg_context->u.bulk.dts = -+ msg->u.buffer_from_host.buffer_header.dts; -+ msg_context->u.bulk.pts = -+ msg->u.buffer_from_host.buffer_header.pts; -+ msg_context->u.bulk.cmd = -+ msg->u.buffer_from_host.buffer_header.cmd; -+ - } else if (msg->u.buffer_from_host.buffer_header.length == 0) { - /* empty buffer */ - if (msg->u.buffer_from_host.buffer_header.flags & -@@ -1538,6 +1562,9 @@ int vchiq_mmal_port_parameter_set(struct - - mutex_unlock(&instance->vchiq_mutex); - -+ if (parameter == MMAL_PARAMETER_ZERO_COPY && !ret) -+ port->zero_copy = !!(*(bool *)value); -+ - return ret; - } - EXPORT_SYMBOL_GPL(vchiq_mmal_port_parameter_set); -@@ -1706,6 +1733,31 @@ int vchiq_mmal_submit_buffer(struct vchi - unsigned long flags = 0; - int ret; - -+ /* -+ * We really want to do this in mmal_vchi_buffer_init but can't as -+ * videobuf2 won't let us have the dmabuf there. -+ */ -+ if (port->zero_copy && buffer->dma_buf && !buffer->vcsm_handle) { -+ pr_debug("%s: import dmabuf %p\n", __func__, buffer->dma_buf); -+ ret = vc_sm_cma_import_dmabuf(buffer->dma_buf, -+ &buffer->vcsm_handle); -+ if (ret) { -+ pr_err("%s: vc_sm_import_dmabuf_fd failed, ret %d\n", -+ __func__, ret); -+ return ret; -+ } -+ -+ buffer->vc_handle = vc_sm_cma_int_handle(buffer->vcsm_handle); -+ if (!buffer->vc_handle) { -+ pr_err("%s: vc_sm_int_handle failed %d\n", -+ __func__, ret); -+ vc_sm_cma_free(buffer->vcsm_handle); -+ return ret; -+ } -+ pr_debug("%s: import dmabuf %p - got vc handle %08X\n", -+ __func__, buffer->dma_buf, buffer->vc_handle); -+ } -+ - ret = buffer_from_host(instance, port, buffer); - if (ret == -EINVAL) { - /* Port is disabled. Queue for when it is enabled. */ -@@ -1739,6 +1791,16 @@ int mmal_vchi_buffer_cleanup(struct mmal - release_msg_context(msg_context); - buf->msg_context = NULL; - -+ if (buf->vcsm_handle) { -+ int ret; -+ -+ pr_debug("%s: vc_sm_cma_free on handle %08X\n", __func__, -+ buf->vcsm_handle); -+ ret = vc_sm_cma_free(buf->vcsm_handle); -+ if (ret) -+ pr_err("%s: vcsm_free failed, ret %d\n", __func__, ret); -+ buf->vcsm_handle = 0; -+ } - return 0; - } - EXPORT_SYMBOL_GPL(mmal_vchi_buffer_cleanup); ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -@@ -49,6 +49,7 @@ typedef void (*vchiq_mmal_buffer_cb)( - - struct vchiq_mmal_port { - u32 enabled:1; -+ u32 zero_copy:1; - u32 handle; - u32 type; /* port type, cached to use on port info set */ - u32 index; /* port index, cached to use on port info set */ diff --git a/target/linux/brcm2708/patches-4.19/950-0275-BCM270X-Adding-device-tree-support-for-AudioSense-Pi.patch b/target/linux/brcm2708/patches-4.19/950-0275-BCM270X-Adding-device-tree-support-for-AudioSense-Pi.patch new file mode 100644 index 0000000000..1e85d9f23c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0275-BCM270X-Adding-device-tree-support-for-AudioSense-Pi.patch @@ -0,0 +1,135 @@ +From 0d2a0f4f4c00c958fb6e7a2673adbe51c2a932f2 Mon Sep 17 00:00:00 2001 +From: b-ak +Date: Thu, 3 Jan 2019 00:29:14 +0530 +Subject: [PATCH] BCM270X: Adding device tree support for AudioSense-Pi + add-on soundcard + +Device tree overlay for AudioSense-Pi card. + +To enable support for the hardware add the following +line to the RPi /boot/config.txt: + + dtoverlay=audiosense-pi + +More documentation @ arch/arm/boot/dts/overlays/README + +Signed-off-by: b-ak +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 8 ++ + .../dts/overlays/audiosense-pi-overlay.dts | 82 +++++++++++++++++++ + 3 files changed, 91 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -20,6 +20,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + audioinjector-addons.dtbo \ + audioinjector-ultra.dtbo \ + audioinjector-wm8731-audio.dtbo \ ++ audiosense-pi.dtbo \ + audremap.dtbo \ + balena-fin.dtbo \ + bmp085_i2c-sensor.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -453,6 +453,14 @@ Load: dtoverlay=audioinjector-wm8731-a + Params: + + ++Name: audiosense-pi ++Info: Configures the audiosense-pi add on soundcard ++ For more information refer to ++ https://gitlab.com/kakar0t/audiosense-pi ++Load: dtoverlay=audiosense-pi ++Params: ++ ++ + Name: audremap + Info: Switches PWM sound output to pins 12 (Right) & 13 (Left) + Load: dtoverlay=audremap,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts +@@ -0,0 +1,82 @@ ++// Definitions for audiosense add on soundcard ++/dts-v1/; ++/plugin/; ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm2837", "brcm,bcm2836", "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ codec_reg_1v8: codec-reg-1v8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "tlv320aic3204_1v8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ codec_rst: codec-rst { ++ brcm,pins = <26>; ++ brcm,function = ; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ /* audio external oscillator */ ++ codec_osc: codec_osc { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <12000000>; /* 12 MHz */ ++ }; ++ ++ codec: tlv320aic32x4@18 { ++ #sound-dai-cells = <0>; ++ compatible = "ti,tlv320aic32x4"; ++ reg = <0x18>; ++ ++ clocks = <&codec_osc>; ++ clock-names = "mclk"; ++ ++ iov-supply = <&vdd_3v3_reg>; ++ ldoin-supply = <&vdd_3v3_reg>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ reset-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; ++ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "as,audiosense-pi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0275-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch b/target/linux/brcm2708/patches-4.19/950-0275-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch deleted file mode 100644 index 5ef425ca9c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0275-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 0b2a62596d0e6efe17bb87a3a5ebd91cee60c64b Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 29 Oct 2018 17:57:45 +0000 -Subject: [PATCH 275/806] media: videobuf2: Allow exporting of a struct dmabuf - -videobuf2 only allowed exporting a dmabuf as a file descriptor, -but there are instances where having the struct dma_buf is -useful within the kernel. - -Split the current implementation into two, one step which -exports a struct dma_buf, and the second which converts that -into an fd. - -Signed-off-by: Dave Stevenson ---- - .../media/common/videobuf2/videobuf2-core.c | 21 ++++++++++++++++--- - include/media/videobuf2-core.h | 15 +++++++++++++ - 2 files changed, 33 insertions(+), 3 deletions(-) - ---- a/drivers/media/common/videobuf2/videobuf2-core.c -+++ b/drivers/media/common/videobuf2/videobuf2-core.c -@@ -1851,12 +1851,12 @@ static int __find_plane_by_offset(struct - return -EINVAL; - } - --int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type, -- unsigned int index, unsigned int plane, unsigned int flags) -+int vb2_core_expbuf_dmabuf(struct vb2_queue *q, unsigned int type, -+ unsigned int index, unsigned int plane, -+ unsigned int flags, struct dma_buf **dmabuf) - { - struct vb2_buffer *vb = NULL; - struct vb2_plane *vb_plane; -- int ret; - struct dma_buf *dbuf; - - if (q->memory != VB2_MEMORY_MMAP) { -@@ -1906,6 +1906,21 @@ int vb2_core_expbuf(struct vb2_queue *q, - return -EINVAL; - } - -+ *dmabuf = dbuf; -+ return 0; -+} -+EXPORT_SYMBOL_GPL(vb2_core_expbuf_dmabuf); -+ -+int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type, -+ unsigned int index, unsigned int plane, unsigned int flags) -+{ -+ struct dma_buf *dbuf; -+ int ret; -+ -+ ret = vb2_core_expbuf_dmabuf(q, type, index, plane, flags, &dbuf); -+ if (ret) -+ return ret; -+ - ret = dma_buf_fd(dbuf, flags & ~O_ACCMODE); - if (ret < 0) { - dprintk(3, "buffer %d, plane %d failed to export (%d)\n", ---- a/include/media/videobuf2-core.h -+++ b/include/media/videobuf2-core.h -@@ -825,6 +825,21 @@ int vb2_core_streamon(struct vb2_queue * - int vb2_core_streamoff(struct vb2_queue *q, unsigned int type); - - /** -+ * vb2_core_expbuf_dmabuf() - Export a buffer as a dma_buf structure -+ * @q: videobuf2 queue -+ * @type: buffer type -+ * @index: id number of the buffer -+ * @plane: index of the plane to be exported, 0 for single plane queues -+ * @flags: flags for newly created file, currently only O_CLOEXEC is -+ * supported, refer to manual of open syscall for more details -+ * @dmabuf: Returns the dmabuf pointer -+ * -+ */ -+int vb2_core_expbuf_dmabuf(struct vb2_queue *q, unsigned int type, -+ unsigned int index, unsigned int plane, -+ unsigned int flags, struct dma_buf **dmabuf); -+ -+/** - * vb2_core_expbuf() - Export a buffer as a file descriptor. - * @q: pointer to &struct vb2_queue with videobuf2 queue. - * @fd: pointer to the file descriptor associated with DMABUF diff --git a/target/linux/brcm2708/patches-4.19/950-0276-overlays-sdio-Add-enhanced-1-bit-support.patch b/target/linux/brcm2708/patches-4.19/950-0276-overlays-sdio-Add-enhanced-1-bit-support.patch new file mode 100644 index 0000000000..42a9f112e9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0276-overlays-sdio-Add-enhanced-1-bit-support.patch @@ -0,0 +1,107 @@ +From 788109b357ddb30a95be72ce46dc22e2335131af Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 10 Jan 2019 15:27:56 +0000 +Subject: [PATCH] overlays: sdio: Add enhanced 1-bit support + +"dtoverlay=sdio,bus_width=1,gpios_22_25" is equivalent to the sdio-1bit +overlay, which is now deprecated. + +"dtoverlay=sdio,bus_width=1,gpios_34_37" enables 1-bit mode on GPIOs 34-37. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 24 +++++++++++---------- + arch/arm/boot/dts/overlays/sdio-overlay.dts | 20 ++++++++++++++++- + 2 files changed, 32 insertions(+), 12 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -479,8 +479,7 @@ Params: + + Name: bmp085_i2c-sensor + Info: This overlay is now deprecated - see i2c-sensor +-Load: dtoverlay=bmp085_i2c-sensor +-Params: ++Load: + + + Name: dht11 +@@ -1737,7 +1736,8 @@ Params: overclock_50 Clock (i + + Name: sdio + Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, +- and enables SDIO via GPIOs 22-27. ++ and enables SDIO via GPIOs 22-27. An example of use in 1-bit mode is ++ "dtoverlay=sdio,bus_width=1,gpios_22_25" + Load: dtoverlay=sdio,= + Params: sdio_overclock SDIO Clock (in MHz) to use when the MMC + framework requests 50MHz +@@ -1747,16 +1747,18 @@ Params: sdio_overclock SDIO Clo + + bus_width Set the SDIO host bus width (default 4 bits) + ++ gpios_22_25 Select GPIOs 22-25 for 1-bit mode. Must be used ++ with bus_width=1. This replaces the sdio-1bit ++ overlay, which is now deprecated. + +-Name: sdio-1bit +-Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, +- and enables 1-bit SDIO via GPIOs 22-25. +-Load: dtoverlay=sdio-1bit,= +-Params: sdio_overclock SDIO Clock (in MHz) to use when the MMC +- framework requests 50MHz ++ gpios_34_37 Select GPIOs 34-37 for 1-bit mode. Must be used ++ with bus_width=1. + +- poll_once Disable SDIO-device polling every second +- (default on: polling once at boot-time) ++ ++Name: sdio-1bit ++Info: This overlay is now deprecated. Use ++ "dtoverlay=sdio,bus_width=1,gpios_22_25" instead. ++Load: + + + Name: sdtweak +--- a/arch/arm/boot/dts/overlays/sdio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts +@@ -32,7 +32,7 @@ + pinctrl-names = "default"; + pinctrl-0 = <&sdio_ovl_pins>; + non-removable; +- bus-width = <1>; ++ bus-width = <4>; + }; + }; + }; +@@ -49,6 +49,22 @@ + }; + + fragment@3 { ++ target = <&sdio_ovl_pins>; ++ __dormant__ { ++ brcm,pins = <22 23 24 25>; ++ brcm,pull = <0 2 2 2>; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&sdio_ovl_pins>; ++ __dormant__ { ++ brcm,pins = <34 35 36 37>; ++ brcm,pull = <0 2 2 2>; ++ }; ++ }; ++ ++ fragment@6 { + target-path = "/aliases"; + __overlay__ { + mmc1 = "/soc/sdio@7e300000"; +@@ -59,5 +75,7 @@ + poll_once = <&sdio_ovl>,"non-removable?"; + bus_width = <&sdio_ovl>,"bus-width:0"; + sdio_overclock = <&sdio_ovl>,"brcm,overclock-50:0"; ++ gpios_22_25 = <0>,"=3"; ++ gpios_34_37 = <0>,"=4"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0276-staging-vc04_services-Add-a-V4L2-M2M-codec-driver.patch b/target/linux/brcm2708/patches-4.19/950-0276-staging-vc04_services-Add-a-V4L2-M2M-codec-driver.patch deleted file mode 100644 index 192e7d9db6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0276-staging-vc04_services-Add-a-V4L2-M2M-codec-driver.patch +++ /dev/null @@ -1,2467 +0,0 @@ -From 2758fab4321519446fe5444769b6257dd18e794b Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 25 Sep 2018 14:53:49 +0100 -Subject: [PATCH 276/806] staging: vc04_services: Add a V4L2 M2M codec driver - -This adds a V4L2 memory to memory device that wraps the MMAL -video decode and video_encode components for H264 and MJPEG encode -and decode, MPEG4, H263, and VP8 decode (and MPEG2 decode -if the appropriate licence has been purchased). - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/Kconfig | 1 + - drivers/staging/vc04_services/Makefile | 9 +- - .../vc04_services/bcm2835-codec/Kconfig | 11 + - .../vc04_services/bcm2835-codec/Makefile | 8 + - .../staging/vc04_services/bcm2835-codec/TODO | 24 + - .../bcm2835-codec/bcm2835-v4l2-codec.c | 2359 +++++++++++++++++ - 6 files changed, 2408 insertions(+), 4 deletions(-) - create mode 100644 drivers/staging/vc04_services/bcm2835-codec/Kconfig - create mode 100644 drivers/staging/vc04_services/bcm2835-codec/Makefile - create mode 100644 drivers/staging/vc04_services/bcm2835-codec/TODO - create mode 100644 drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c - ---- a/drivers/staging/vc04_services/Kconfig -+++ b/drivers/staging/vc04_services/Kconfig -@@ -23,6 +23,7 @@ source "drivers/staging/vc04_services/bc - source "drivers/staging/vc04_services/bcm2835-camera/Kconfig" - source "drivers/staging/vc04_services/vchiq-mmal/Kconfig" - source "drivers/staging/vc04_services/vc-sm-cma/Kconfig" -+source "drivers/staging/vc04_services/bcm2835-codec/Kconfig" - - endif - ---- a/drivers/staging/vc04_services/Makefile -+++ b/drivers/staging/vc04_services/Makefile -@@ -10,10 +10,11 @@ vchiq-objs := \ - interface/vchiq_arm/vchiq_util.o \ - interface/vchiq_arm/vchiq_connected.o \ - --obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/ --obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-camera/ --obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += vchiq-mmal/ --obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma/ -+obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/ -+obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-camera/ -+obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += vchiq-mmal/ -+obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma/ -+obj-$(CONFIG_VIDEO_CODEC_BCM2835) += bcm2835-codec/ - - ccflags-y += -Idrivers/staging/vc04_services -D__VCCOREVER__=0x04000000 - ---- /dev/null -+++ b/drivers/staging/vc04_services/bcm2835-codec/Kconfig -@@ -0,0 +1,11 @@ -+config VIDEO_CODEC_BCM2835 -+ tristate "BCM2835 Video codec support" -+ depends on MEDIA_SUPPORT -+ depends on VIDEO_V4L2 && (ARCH_BCM2835 || COMPILE_TEST) -+ select BCM2835_VCHIQ_MMAL -+ select VIDEOBUF2_DMA_CONTIG -+ select V4L2_MEM2MEM_DEV -+ help -+ Say Y here to enable the V4L2 video codecs for -+ Broadcom BCM2835 SoC. This operates over the VCHIQ interface -+ to a service running on VideoCore. ---- /dev/null -+++ b/drivers/staging/vc04_services/bcm2835-codec/Makefile -@@ -0,0 +1,8 @@ -+# SPDX-License-Identifier: GPL-2.0 -+bcm2835-codec-objs := bcm2835-v4l2-codec.o -+ -+obj-$(CONFIG_VIDEO_CODEC_BCM2835) += bcm2835-codec.o -+ -+ccflags-y += \ -+ -Idrivers/staging/vc04_services \ -+ -D__VCCOREVER__=0x04000000 ---- /dev/null -+++ b/drivers/staging/vc04_services/bcm2835-codec/TODO -@@ -0,0 +1,24 @@ -+1) Convert to be a platform driver. -+ -+Right now when the module probes, it tries to initialize VCHI and -+errors out if it wasn't ready yet. If bcm2835-v4l2 was built in, then -+VCHI generally isn't ready because it depends on both the firmware and -+mailbox drivers having already loaded. -+ -+We should have VCHI create a platform device once it's initialized, -+and have this driver bind to it, so that we automatically load the -+v4l2 module after VCHI loads. -+ -+2) Support SELECTION API to define crop region on the image for encode. -+ -+Particularly for resolutions that aren't a multiple of the macroblock -+size, the codec will report a resolution that is a multiple of the macroblock -+size (it has to have the memory to decode into), and then a different crop -+region within that buffer. -+The most common example is 1080P, where the buffer will be 1920x1088 with a -+crop region of 1920x1080. -+ -+3) Refactor so that the component creation is only on queue_setup, not open. -+ -+Fixes v4l2-compliance failure on trying to open 100 instances of the -+device. -\ No newline at end of file ---- /dev/null -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -0,0 +1,2359 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+/* -+ * A v4l2-mem2mem device that wraps the video codec MMAL component. -+ * -+ * Copyright 2018 Raspberry Pi (Trading) Ltd. -+ * Author: Dave Stevenson (dave.stevenson@raspberrypi.org) -+ * -+ * Loosely based on the vim2m virtual driver by Pawel Osciak -+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. -+ * Pawel Osciak, -+ * Marek Szyprowski, -+ * -+ * Whilst this driver uses the v4l2_mem2mem framework, it does not need the -+ * scheduling aspects, so will always take the buffers, pass them to the VPU, -+ * and then signal the job as complete. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "vchiq-mmal/mmal-encodings.h" -+#include "vchiq-mmal/mmal-msg.h" -+#include "vchiq-mmal/mmal-parameters.h" -+#include "vchiq-mmal/mmal-vchiq.h" -+ -+/* -+ * Default /dev/videoN node numbers for decode and encode. -+ * Deliberately avoid the very low numbers as these are often taken by webcams -+ * etc, and simple apps tend to only go for /dev/video0. -+ */ -+static int decode_video_nr = 10; -+module_param(decode_video_nr, int, 0644); -+MODULE_PARM_DESC(decode_video_nr, "decoder video device number"); -+ -+static int encode_video_nr = 11; -+module_param(encode_video_nr, int, 0644); -+MODULE_PARM_DESC(encode_video_nr, "encoder video device number"); -+ -+static unsigned int debug; -+module_param(debug, uint, 0644); -+MODULE_PARM_DESC(debug, "activates debug info (0-3)"); -+ -+#define MIN_W 32 -+#define MIN_H 32 -+#define MAX_W 1920 -+#define MAX_H 1088 -+#define BPL_ALIGN 32 -+#define DEFAULT_WIDTH 640 -+#define DEFAULT_HEIGHT 480 -+/* -+ * The unanswered question - what is the maximum size of a compressed frame? -+ * V4L2 mandates that the encoded frame must fit in a single buffer. Sizing -+ * that buffer is a compromise between wasting memory and risking not fitting. -+ * The 1080P version of Big Buck Bunny has some frames that exceed 512kB. -+ * Adopt a moderately arbitrary split at 720P for switching between 512 and -+ * 768kB buffers. -+ */ -+#define DEF_COMP_BUF_SIZE_GREATER_720P (768 << 10) -+#define DEF_COMP_BUF_SIZE_720P_OR_LESS (512 << 10) -+ -+/* Flags that indicate a format can be used for capture/output */ -+#define MEM2MEM_CAPTURE BIT(0) -+#define MEM2MEM_OUTPUT BIT(1) -+ -+#define MEM2MEM_NAME "bcm2835-codec" -+ -+struct bcm2835_codec_fmt { -+ u32 fourcc; -+ int depth; -+ int bytesperline_align; -+ u32 flags; -+ u32 mmal_fmt; -+ bool decode_only; -+ bool encode_only; -+ int size_multiplier_x2; -+}; -+ -+/* Supported raw pixel formats. Those supported for both encode and decode -+ * must come first, with those only supported for decode coming after (there -+ * are no formats supported for encode only). -+ */ -+static struct bcm2835_codec_fmt raw_formats[] = { -+ { -+ .fourcc = V4L2_PIX_FMT_YUV420, -+ .depth = 8, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_I420, -+ .size_multiplier_x2 = 3, -+ }, { -+ .fourcc = V4L2_PIX_FMT_YVU420, -+ .depth = 8, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_YV12, -+ .size_multiplier_x2 = 3, -+ }, { -+ .fourcc = V4L2_PIX_FMT_NV12, -+ .depth = 8, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_NV12, -+ .size_multiplier_x2 = 3, -+ }, { -+ .fourcc = V4L2_PIX_FMT_NV21, -+ .depth = 8, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_NV21, -+ .size_multiplier_x2 = 3, -+ }, { -+ .fourcc = V4L2_PIX_FMT_RGB565, -+ .depth = 16, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_RGB16, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_YUYV, -+ .depth = 16, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_YUYV, -+ .encode_only = true, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_UYVY, -+ .depth = 16, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_UYVY, -+ .encode_only = true, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_YVYU, -+ .depth = 16, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_YVYU, -+ .encode_only = true, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_VYUY, -+ .depth = 16, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_VYUY, -+ .encode_only = true, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_RGB24, -+ .depth = 24, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_RGB24, -+ .encode_only = true, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_BGR24, -+ .depth = 24, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BGR24, -+ .encode_only = true, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_BGR32, -+ .depth = 32, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BGRA, -+ .encode_only = true, -+ .size_multiplier_x2 = 2, -+ }, -+}; -+ -+/* Supported encoded formats. Those supported for both encode and decode -+ * must come first, with those only supported for decode coming after (there -+ * are no formats supported for encode only). -+ */ -+static struct bcm2835_codec_fmt encoded_formats[] = { -+ { -+ .fourcc = V4L2_PIX_FMT_H264, -+ .depth = 0, -+ .flags = V4L2_FMT_FLAG_COMPRESSED, -+ .mmal_fmt = MMAL_ENCODING_H264, -+ }, { -+ .fourcc = V4L2_PIX_FMT_MJPEG, -+ .depth = 0, -+ .flags = V4L2_FMT_FLAG_COMPRESSED, -+ .mmal_fmt = MMAL_ENCODING_MJPEG, -+ }, { -+ .fourcc = V4L2_PIX_FMT_MPEG4, -+ .depth = 0, -+ .flags = V4L2_FMT_FLAG_COMPRESSED, -+ .mmal_fmt = MMAL_ENCODING_MP4V, -+ .decode_only = true, -+ }, { -+ .fourcc = V4L2_PIX_FMT_H263, -+ .depth = 0, -+ .flags = V4L2_FMT_FLAG_COMPRESSED, -+ .mmal_fmt = MMAL_ENCODING_H263, -+ .decode_only = true, -+ }, { -+ .fourcc = V4L2_PIX_FMT_MPEG2, -+ .depth = 0, -+ .flags = V4L2_FMT_FLAG_COMPRESSED, -+ .mmal_fmt = MMAL_ENCODING_MP2V, -+ .decode_only = true, -+ }, { -+ .fourcc = V4L2_PIX_FMT_VP8, -+ .depth = 0, -+ .flags = V4L2_FMT_FLAG_COMPRESSED, -+ .mmal_fmt = MMAL_ENCODING_VP8, -+ .decode_only = true, -+ }, -+ /* -+ * This list couold include VP6 and Theorafor decode, but V4L2 doesn't -+ * support them. -+ */ -+}; -+ -+struct bcm2835_codec_fmt_list { -+ struct bcm2835_codec_fmt *list; -+ unsigned int num_entries; -+}; -+ -+#define RAW_LIST 0 -+#define ENCODED_LIST 1 -+ -+struct bcm2835_codec_fmt_list formats[] = { -+ { -+ .list = raw_formats, -+ .num_entries = ARRAY_SIZE(raw_formats), -+ }, { -+ .list = encoded_formats, -+ .num_entries = ARRAY_SIZE(encoded_formats), -+ }, -+}; -+ -+struct m2m_mmal_buffer { -+ struct v4l2_m2m_buffer m2m; -+ struct mmal_buffer mmal; -+}; -+ -+/* Per-queue, driver-specific private data */ -+struct bcm2835_codec_q_data { -+ /* -+ * These parameters should be treated as gospel, with everything else -+ * being determined from them. -+ */ -+ /* Buffer width/height */ -+ unsigned int bytesperline; -+ unsigned int height; -+ /* Crop size used for selection handling */ -+ unsigned int crop_width; -+ unsigned int crop_height; -+ bool selection_set; -+ -+ unsigned int sizeimage; -+ unsigned int sequence; -+ struct bcm2835_codec_fmt *fmt; -+ -+ /* One extra buffer header so we can send an EOS. */ -+ struct m2m_mmal_buffer eos_buffer; -+ bool eos_buffer_in_use; /* debug only */ -+}; -+ -+enum { -+ V4L2_M2M_SRC = 0, -+ V4L2_M2M_DST = 1, -+}; -+ -+static inline struct bcm2835_codec_fmt_list *get_format_list(bool decode, -+ bool capture) -+{ -+ return decode ^ capture ? &formats[ENCODED_LIST] : &formats[RAW_LIST]; -+} -+ -+static struct bcm2835_codec_fmt *get_default_format(bool decode, bool capture) -+{ -+ return &get_format_list(decode, capture)->list[0]; -+} -+ -+static struct bcm2835_codec_fmt *find_format(struct v4l2_format *f, bool decode, -+ bool capture) -+{ -+ struct bcm2835_codec_fmt *fmt; -+ unsigned int k; -+ struct bcm2835_codec_fmt_list *fmts = get_format_list(decode, capture); -+ -+ for (k = 0; k < fmts->num_entries; k++) { -+ fmt = &fmts->list[k]; -+ if (fmt->fourcc == f->fmt.pix.pixelformat) -+ break; -+ } -+ -+ /* -+ * Some compressed formats are only supported for decoding, not -+ * encoding. -+ */ -+ if (!decode && fmts->list[k].decode_only) -+ return NULL; -+ -+ /* Some pixel formats are only supported for encoding, not decoding. */ -+ if (decode && fmts->list[k].encode_only) -+ return NULL; -+ -+ if (k == fmts->num_entries) -+ return NULL; -+ -+ return &fmts->list[k]; -+} -+ -+struct bcm2835_codec_dev { -+ struct platform_device *pdev; -+ -+ /* v4l2 devices */ -+ struct v4l2_device v4l2_dev; -+ struct video_device vfd; -+ /* mutex for the v4l2 device */ -+ struct mutex dev_mutex; -+ atomic_t num_inst; -+ -+ /* allocated mmal instance and components */ -+ bool decode; /* Is this instance a decoder? */ -+ struct vchiq_mmal_instance *instance; -+ -+ struct v4l2_m2m_dev *m2m_dev; -+}; -+ -+struct bcm2835_codec_ctx { -+ struct v4l2_fh fh; -+ struct bcm2835_codec_dev *dev; -+ -+ struct v4l2_ctrl_handler hdl; -+ -+ struct vchiq_mmal_component *component; -+ bool component_enabled; -+ -+ enum v4l2_colorspace colorspace; -+ enum v4l2_ycbcr_encoding ycbcr_enc; -+ enum v4l2_xfer_func xfer_func; -+ enum v4l2_quantization quant; -+ -+ /* Source and destination queue data */ -+ struct bcm2835_codec_q_data q_data[2]; -+ s32 bitrate; -+ -+ bool aborting; -+ int num_ip_buffers; -+ int num_op_buffers; -+ struct completion frame_cmplt; -+}; -+ -+struct bcm2835_codec_driver { -+ struct bcm2835_codec_dev *encode; -+ struct bcm2835_codec_dev *decode; -+}; -+ -+static inline struct bcm2835_codec_ctx *file2ctx(struct file *file) -+{ -+ return container_of(file->private_data, struct bcm2835_codec_ctx, fh); -+} -+ -+static struct bcm2835_codec_q_data *get_q_data(struct bcm2835_codec_ctx *ctx, -+ enum v4l2_buf_type type) -+{ -+ switch (type) { -+ case V4L2_BUF_TYPE_VIDEO_OUTPUT: -+ return &ctx->q_data[V4L2_M2M_SRC]; -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ return &ctx->q_data[V4L2_M2M_DST]; -+ default: -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Invalid queue type %u\n", -+ __func__, type); -+ break; -+ } -+ return NULL; -+} -+ -+static struct vchiq_mmal_port *get_port_data(struct bcm2835_codec_ctx *ctx, -+ enum v4l2_buf_type type) -+{ -+ if (!ctx->component) -+ return NULL; -+ -+ switch (type) { -+ case V4L2_BUF_TYPE_VIDEO_OUTPUT: -+ return &ctx->component->input[0]; -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ return &ctx->component->output[0]; -+ default: -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Invalid queue type %u\n", -+ __func__, type); -+ break; -+ } -+ return NULL; -+} -+ -+/* -+ * mem2mem callbacks -+ */ -+ -+/** -+ * job_ready() - check whether an instance is ready to be scheduled to run -+ */ -+static int job_ready(void *priv) -+{ -+ struct bcm2835_codec_ctx *ctx = priv; -+ -+ if (!v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) && -+ !v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx)) -+ return 0; -+ -+ return 1; -+} -+ -+static void job_abort(void *priv) -+{ -+ struct bcm2835_codec_ctx *ctx = priv; -+ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s\n", __func__); -+ /* Will cancel the transaction in the next interrupt handler */ -+ ctx->aborting = 1; -+} -+ -+static inline unsigned int get_sizeimage(int bpl, int height, -+ struct bcm2835_codec_fmt *fmt) -+{ -+ return (bpl * height * fmt->size_multiplier_x2) >> 1; -+} -+ -+static inline unsigned int get_bytesperline(int width, -+ struct bcm2835_codec_fmt *fmt) -+{ -+ return ALIGN((width * fmt->depth) >> 3, fmt->bytesperline_align); -+} -+ -+static void setup_mmal_port_format(struct bcm2835_codec_ctx *ctx, -+ bool decode, -+ struct bcm2835_codec_q_data *q_data, -+ struct vchiq_mmal_port *port) -+{ -+ port->format.encoding = q_data->fmt->mmal_fmt; -+ -+ if (!(q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED)) { -+ /* Raw image format - set width/height */ -+ port->es.video.width = q_data->bytesperline / -+ (q_data->fmt->depth >> 3); -+ port->es.video.height = q_data->height; -+ port->es.video.crop.width = q_data->crop_width; -+ port->es.video.crop.height = q_data->crop_height; -+ port->es.video.frame_rate.num = 0; -+ port->es.video.frame_rate.den = 1; -+ } else { -+ /* Compressed format - leave resolution as 0 for decode */ -+ if (decode) { -+ port->es.video.width = 0; -+ port->es.video.height = 0; -+ port->es.video.crop.width = 0; -+ port->es.video.crop.height = 0; -+ } else { -+ port->es.video.width = q_data->crop_width; -+ port->es.video.height = q_data->height; -+ port->es.video.crop.width = q_data->crop_width; -+ port->es.video.crop.height = q_data->crop_height; -+ port->format.bitrate = ctx->bitrate; -+ } -+ port->es.video.frame_rate.num = 0; -+ port->es.video.frame_rate.den = 1; -+ } -+ port->es.video.crop.x = 0; -+ port->es.video.crop.y = 0; -+ -+ port->current_buffer.size = q_data->sizeimage; -+}; -+ -+static void ip_buffer_cb(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, int status, -+ struct mmal_buffer *mmal_buf) -+{ -+ struct bcm2835_codec_ctx *ctx = port->cb_ctx/*, *curr_ctx*/; -+ struct m2m_mmal_buffer *buf = -+ container_of(mmal_buf, struct m2m_mmal_buffer, mmal); -+ -+ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: port %p buf %p length %lu, flags %x\n", -+ __func__, port, mmal_buf, mmal_buf->length, -+ mmal_buf->mmal_flags); -+ -+ if (buf == &ctx->q_data[V4L2_M2M_SRC].eos_buffer) { -+ /* Do we need to add lcoking to prevent multiple submission of -+ * the EOS, and therefore handle mutliple return here? -+ */ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: eos buffer returned.\n", -+ __func__); -+ ctx->q_data[V4L2_M2M_SRC].eos_buffer_in_use = false; -+ return; -+ } -+ -+ if (status) { -+ /* error in transfer */ -+ if (buf) -+ /* there was a buffer with the error so return it */ -+ vb2_buffer_done(&buf->m2m.vb.vb2_buf, -+ VB2_BUF_STATE_ERROR); -+ return; -+ } -+ if (mmal_buf->cmd) { -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Not expecting cmd msgs on ip callback - %08x\n", -+ __func__, mmal_buf->cmd); -+ /* -+ * CHECKME: Should we return here. The buffer shouldn't have a -+ * message context or vb2 buf associated. -+ */ -+ } -+ -+ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: no error. Return buffer %p\n", -+ __func__, &buf->m2m.vb.vb2_buf); -+ vb2_buffer_done(&buf->m2m.vb.vb2_buf, VB2_BUF_STATE_DONE); -+ -+ ctx->num_ip_buffers++; -+ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: done %d input buffers\n", -+ __func__, ctx->num_ip_buffers); -+ -+ if (!port->enabled) -+ complete(&ctx->frame_cmplt); -+} -+ -+static void queue_res_chg_event(struct bcm2835_codec_ctx *ctx) -+{ -+ static const struct v4l2_event ev_src_ch = { -+ .type = V4L2_EVENT_SOURCE_CHANGE, -+ .u.src_change.changes = -+ V4L2_EVENT_SRC_CH_RESOLUTION, -+ }; -+ -+ v4l2_event_queue_fh(&ctx->fh, &ev_src_ch); -+} -+ -+static void send_eos_event(struct bcm2835_codec_ctx *ctx) -+{ -+ static const struct v4l2_event ev = { -+ .type = V4L2_EVENT_EOS, -+ }; -+ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Sending EOS event\n"); -+ -+ v4l2_event_queue_fh(&ctx->fh, &ev); -+} -+ -+static void color_mmal2v4l(struct bcm2835_codec_ctx *ctx, u32 mmal_color_space) -+{ -+ switch (mmal_color_space) { -+ case MMAL_COLOR_SPACE_ITUR_BT601: -+ ctx->colorspace = V4L2_COLORSPACE_REC709; -+ ctx->xfer_func = V4L2_XFER_FUNC_709; -+ ctx->ycbcr_enc = V4L2_YCBCR_ENC_601; -+ ctx->quant = V4L2_QUANTIZATION_LIM_RANGE; -+ break; -+ -+ case MMAL_COLOR_SPACE_ITUR_BT709: -+ ctx->colorspace = V4L2_COLORSPACE_REC709; -+ ctx->xfer_func = V4L2_XFER_FUNC_709; -+ ctx->ycbcr_enc = V4L2_YCBCR_ENC_709; -+ ctx->quant = V4L2_QUANTIZATION_LIM_RANGE; -+ break; -+ } -+} -+ -+static void handle_fmt_changed(struct bcm2835_codec_ctx *ctx, -+ struct mmal_buffer *mmal_buf) -+{ -+ struct bcm2835_codec_q_data *q_data; -+ struct mmal_msg_event_format_changed *format = -+ (struct mmal_msg_event_format_changed *)mmal_buf->buffer; -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Format changed: buff size min %u, rec %u, buff num min %u, rec %u\n", -+ __func__, -+ format->buffer_size_min, -+ format->buffer_size_recommended, -+ format->buffer_num_min, -+ format->buffer_num_recommended -+ ); -+ if (format->format.type != MMAL_ES_TYPE_VIDEO) { -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Format changed but not video %u\n", -+ __func__, format->format.type); -+ return; -+ } -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Format changed to %ux%u, crop %ux%u, colourspace %08X\n", -+ __func__, format->es.video.width, format->es.video.height, -+ format->es.video.crop.width, format->es.video.crop.height, -+ format->es.video.color_space); -+ -+ q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); -+ q_data->crop_width = format->es.video.crop.width; -+ q_data->crop_height = format->es.video.crop.height; -+ q_data->bytesperline = format->es.video.crop.width; -+ q_data->height = format->es.video.height; -+ q_data->sizeimage = format->buffer_size_min; -+ if (format->es.video.color_space) -+ color_mmal2v4l(ctx, format->es.video.color_space); -+ -+ queue_res_chg_event(ctx); -+} -+ -+static void op_buffer_cb(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, int status, -+ struct mmal_buffer *mmal_buf) -+{ -+ struct bcm2835_codec_ctx *ctx = port->cb_ctx; -+ struct m2m_mmal_buffer *buf; -+ struct vb2_v4l2_buffer *vb2; -+ -+ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, -+ "%s: status:%d, buf:%p, length:%lu, flags %u, pts %lld\n", -+ __func__, status, mmal_buf, mmal_buf->length, -+ mmal_buf->mmal_flags, mmal_buf->pts); -+ -+ if (status) { -+ /* error in transfer */ -+ if (vb2) { -+ /* there was a buffer with the error so return it */ -+ vb2_buffer_done(&vb2->vb2_buf, VB2_BUF_STATE_ERROR); -+ } -+ return; -+ } -+ -+ if (mmal_buf->cmd) { -+ switch (mmal_buf->cmd) { -+ case MMAL_EVENT_FORMAT_CHANGED: -+ { -+ handle_fmt_changed(ctx, mmal_buf); -+ break; -+ } -+ default: -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Unexpected event on output callback - %08x\n", -+ __func__, mmal_buf->cmd); -+ break; -+ } -+ return; -+ } -+ -+ buf = container_of(mmal_buf, struct m2m_mmal_buffer, mmal); -+ vb2 = &buf->m2m.vb; -+ -+ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: length %lu, flags %x, idx %u\n", -+ __func__, mmal_buf->length, mmal_buf->mmal_flags, -+ vb2->vb2_buf.index); -+ -+ if (mmal_buf->length == 0) { -+ /* stream ended, or buffer being returned during disable. */ -+ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: Empty buffer - flags %04x", -+ __func__, mmal_buf->mmal_flags); -+ if (!mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS) { -+ vb2_buffer_done(&vb2->vb2_buf, VB2_BUF_STATE_ERROR); -+ if (!port->enabled) -+ complete(&ctx->frame_cmplt); -+ return; -+ } -+ } -+ if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS) { -+ /* EOS packet from the VPU */ -+ send_eos_event(ctx); -+ vb2->flags |= V4L2_BUF_FLAG_LAST; -+ } -+ -+ vb2->vb2_buf.timestamp = mmal_buf->pts; -+ -+ vb2_set_plane_payload(&vb2->vb2_buf, 0, mmal_buf->length); -+ if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) -+ vb2->flags |= V4L2_BUF_FLAG_KEYFRAME; -+ -+ vb2_buffer_done(&vb2->vb2_buf, VB2_BUF_STATE_DONE); -+ ctx->num_op_buffers++; -+ -+ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: done %d output buffers\n", -+ __func__, ctx->num_op_buffers); -+ -+ if (!port->enabled) -+ complete(&ctx->frame_cmplt); -+} -+ -+/* vb2_to_mmal_buffer() - converts vb2 buffer header to MMAL -+ * -+ * Copies all the required fields from a VB2 buffer to the MMAL buffer header, -+ * ready for sending to the VPU. -+ */ -+static void vb2_to_mmal_buffer(struct m2m_mmal_buffer *buf, -+ struct vb2_v4l2_buffer *vb2) -+{ -+ buf->mmal.mmal_flags = 0; -+ if (vb2->flags & V4L2_BUF_FLAG_KEYFRAME) -+ buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_KEYFRAME; -+ -+ /* -+ * Adding this means that the data must be framed correctly as one frame -+ * per buffer. The underlying decoder has no such requirement, but it -+ * will reduce latency as the bistream parser will be kicked immediately -+ * to parse the frame, rather than relying on its own heuristics for -+ * when to wake up. -+ */ -+ buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_FRAME_END; -+ -+ buf->mmal.length = vb2->vb2_buf.planes[0].bytesused; -+ /* -+ * Minor ambiguity in the V4L2 spec as to whether passing in a 0 length -+ * buffer, or one with V4L2_BUF_FLAG_LAST set denotes end of stream. -+ * Handle either. -+ */ -+ if (!buf->mmal.length || vb2->flags & V4L2_BUF_FLAG_LAST) -+ buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_EOS; -+ -+ buf->mmal.pts = vb2->vb2_buf.timestamp; -+ buf->mmal.dts = MMAL_TIME_UNKNOWN; -+} -+ -+/* device_run() - prepares and starts the device -+ * -+ * This simulates all the immediate preparations required before starting -+ * a device. This will be called by the framework when it decides to schedule -+ * a particular instance. -+ */ -+static void device_run(void *priv) -+{ -+ struct bcm2835_codec_ctx *ctx = priv; -+ struct bcm2835_codec_dev *dev = ctx->dev; -+ struct vb2_v4l2_buffer *src_buf, *dst_buf; -+ struct m2m_mmal_buffer *src_m2m_buf, *dst_m2m_buf; -+ struct v4l2_m2m_buffer *m2m; -+ int ret; -+ -+ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: off we go\n", __func__); -+ -+ src_buf = v4l2_m2m_buf_remove(&ctx->fh.m2m_ctx->out_q_ctx); -+ if (src_buf) { -+ m2m = container_of(src_buf, struct v4l2_m2m_buffer, vb); -+ src_m2m_buf = container_of(m2m, struct m2m_mmal_buffer, m2m); -+ vb2_to_mmal_buffer(src_m2m_buf, src_buf); -+ -+ ret = vchiq_mmal_submit_buffer(dev->instance, -+ &ctx->component->input[0], -+ &src_m2m_buf->mmal); -+ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: Submitted ip buffer len %lu, pts %llu, flags %04x\n", -+ __func__, src_m2m_buf->mmal.length, -+ src_m2m_buf->mmal.pts, src_m2m_buf->mmal.mmal_flags); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed submitting ip buffer\n", -+ __func__); -+ } -+ -+ dst_buf = v4l2_m2m_buf_remove(&ctx->fh.m2m_ctx->cap_q_ctx); -+ if (dst_buf) { -+ m2m = container_of(dst_buf, struct v4l2_m2m_buffer, vb); -+ dst_m2m_buf = container_of(m2m, struct m2m_mmal_buffer, m2m); -+ vb2_to_mmal_buffer(dst_m2m_buf, dst_buf); -+ -+ ret = vchiq_mmal_submit_buffer(dev->instance, -+ &ctx->component->output[0], -+ &dst_m2m_buf->mmal); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed submitting op buffer\n", -+ __func__); -+ } -+ -+ v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: Submitted src %p, dst %p\n", -+ __func__, src_m2m_buf, dst_m2m_buf); -+ -+ /* Complete the job here. */ -+ v4l2_m2m_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx); -+} -+ -+/* -+ * video ioctls -+ */ -+static int vidioc_querycap(struct file *file, void *priv, -+ struct v4l2_capability *cap) -+{ -+ strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); -+ strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); -+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", -+ MEM2MEM_NAME); -+ cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; -+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; -+ return 0; -+} -+ -+static int enum_fmt(struct v4l2_fmtdesc *f, bool decode, bool capture) -+{ -+ struct bcm2835_codec_fmt *fmt; -+ struct bcm2835_codec_fmt_list *fmts = get_format_list(decode, capture); -+ -+ if (f->index < fmts->num_entries) { -+ /* Format found */ -+ /* Check format isn't a decode only format when encoding */ -+ if (!decode && -+ fmts->list[f->index].decode_only) -+ return -EINVAL; -+ /* Check format isn't a decode only format when encoding */ -+ if (decode && -+ fmts->list[f->index].encode_only) -+ return -EINVAL; -+ -+ fmt = &fmts->list[f->index]; -+ f->pixelformat = fmt->fourcc; -+ f->flags = fmt->flags; -+ return 0; -+ } -+ -+ /* Format not found */ -+ return -EINVAL; -+} -+ -+static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_fmtdesc *f) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ -+ return enum_fmt(f, ctx->dev->decode, true); -+} -+ -+static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, -+ struct v4l2_fmtdesc *f) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ -+ return enum_fmt(f, ctx->dev->decode, false); -+} -+ -+static int vidioc_g_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f) -+{ -+ struct vb2_queue *vq; -+ struct bcm2835_codec_q_data *q_data; -+ -+ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); -+ if (!vq) -+ return -EINVAL; -+ -+ q_data = get_q_data(ctx, f->type); -+ -+ f->fmt.pix.width = q_data->crop_width; -+ f->fmt.pix.height = q_data->height; -+ f->fmt.pix.field = V4L2_FIELD_NONE; -+ f->fmt.pix.pixelformat = q_data->fmt->fourcc; -+ f->fmt.pix.bytesperline = q_data->bytesperline; -+ f->fmt.pix.sizeimage = q_data->sizeimage; -+ f->fmt.pix.colorspace = ctx->colorspace; -+ f->fmt.pix.xfer_func = ctx->xfer_func; -+ f->fmt.pix.ycbcr_enc = ctx->ycbcr_enc; -+ f->fmt.pix.quantization = ctx->quant; -+ -+ return 0; -+} -+ -+static int vidioc_g_fmt_vid_out(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ return vidioc_g_fmt(file2ctx(file), f); -+} -+ -+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ return vidioc_g_fmt(file2ctx(file), f); -+} -+ -+static int vidioc_try_fmt(struct v4l2_format *f, struct bcm2835_codec_fmt *fmt) -+{ -+ /* -+ * The V4L2 specification requires the driver to correct the format -+ * struct if any of the dimensions is unsupported -+ */ -+ if (f->fmt.pix.width > MAX_W) -+ f->fmt.pix.width = MAX_W; -+ if (f->fmt.pix.height > MAX_H) -+ f->fmt.pix.height = MAX_H; -+ -+ if (!fmt->flags & V4L2_FMT_FLAG_COMPRESSED) { -+ /* Only clip min w/h on capture. Treat 0x0 as unknown. */ -+ if (f->fmt.pix.width < MIN_W) -+ f->fmt.pix.width = MIN_W; -+ if (f->fmt.pix.height < MIN_H) -+ f->fmt.pix.height = MIN_H; -+ -+ /* -+ * Buffer must have a vertical alignment of 16 lines. -+ * The selection will reflect any cropping rectangle when only -+ * some of the pixels are active. -+ */ -+ f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); -+ -+ f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, -+ fmt); -+ f->fmt.pix.sizeimage = get_sizeimage(f->fmt.pix.bytesperline, -+ f->fmt.pix.height, -+ fmt); -+ } else { -+ u32 min_size = f->fmt.pix.width > 1280 || -+ f->fmt.pix.height > 720 ? -+ DEF_COMP_BUF_SIZE_GREATER_720P : -+ DEF_COMP_BUF_SIZE_720P_OR_LESS; -+ -+ f->fmt.pix.bytesperline = 0; -+ if (f->fmt.pix.sizeimage < min_size) -+ f->fmt.pix.sizeimage = min_size; -+ } -+ -+ f->fmt.pix.field = V4L2_FIELD_NONE; -+ -+ return 0; -+} -+ -+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct bcm2835_codec_fmt *fmt; -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ -+ fmt = find_format(f, ctx->dev->decode, true); -+ if (!fmt) { -+ f->fmt.pix.pixelformat = get_default_format(ctx->dev->decode, -+ true)->fourcc; -+ fmt = find_format(f, ctx->dev->decode, true); -+ } -+ -+ return vidioc_try_fmt(f, fmt); -+} -+ -+static int vidioc_try_fmt_vid_out(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct bcm2835_codec_fmt *fmt; -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ -+ fmt = find_format(f, ctx->dev->decode, false); -+ if (!fmt) { -+ f->fmt.pix.pixelformat = get_default_format(ctx->dev->decode, -+ false)->fourcc; -+ fmt = find_format(f, ctx->dev->decode, false); -+ } -+ -+ if (!f->fmt.pix.colorspace) -+ f->fmt.pix.colorspace = ctx->colorspace; -+ -+ return vidioc_try_fmt(f, fmt); -+} -+ -+static int vidioc_s_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f, -+ unsigned int requested_height) -+{ -+ struct bcm2835_codec_q_data *q_data; -+ struct vb2_queue *vq; -+ struct vchiq_mmal_port *port; -+ bool update_capture_port = false; -+ int ret; -+ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", -+ f->type, f->fmt.pix.width, f->fmt.pix.height, -+ f->fmt.pix.pixelformat, f->fmt.pix.sizeimage); -+ -+ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); -+ if (!vq) -+ return -EINVAL; -+ -+ q_data = get_q_data(ctx, f->type); -+ if (!q_data) -+ return -EINVAL; -+ -+ if (vb2_is_busy(vq)) { -+ v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); -+ return -EBUSY; -+ } -+ -+ q_data->fmt = find_format(f, ctx->dev->decode, -+ f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE); -+ q_data->crop_width = f->fmt.pix.width; -+ q_data->height = f->fmt.pix.height; -+ if (!q_data->selection_set) -+ q_data->crop_height = requested_height; -+ -+ /* -+ * Copying the behaviour of vicodec which retains a single set of -+ * colorspace parameters for both input and output. -+ */ -+ ctx->colorspace = f->fmt.pix.colorspace; -+ ctx->xfer_func = f->fmt.pix.xfer_func; -+ ctx->ycbcr_enc = f->fmt.pix.ycbcr_enc; -+ ctx->quant = f->fmt.pix.quantization; -+ -+ /* All parameters should have been set correctly by try_fmt */ -+ q_data->bytesperline = f->fmt.pix.bytesperline; -+ q_data->sizeimage = f->fmt.pix.sizeimage; -+ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Calulated bpl as %u, size %u\n", -+ q_data->bytesperline, q_data->sizeimage); -+ -+ if (ctx->dev->decode && q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED && -+ f->fmt.pix.width && f->fmt.pix.height) { -+ /* -+ * On the decoder, if provided with a resolution on the input -+ * side, then replicate that to the output side. -+ * GStreamer appears not to support V4L2_EVENT_SOURCE_CHANGE, -+ * nor set up a resolution on the output side, therefore -+ * we can't decode anything at a resolution other than the -+ * default one. -+ */ -+ struct bcm2835_codec_q_data *q_data_dst = -+ &ctx->q_data[V4L2_M2M_DST]; -+ -+ q_data_dst->crop_width = q_data->crop_width; -+ q_data_dst->crop_height = q_data->crop_height; -+ q_data_dst->height = ALIGN(q_data->crop_height, 16); -+ -+ q_data_dst->bytesperline = -+ get_bytesperline(f->fmt.pix.width, q_data_dst->fmt); -+ q_data_dst->sizeimage = get_sizeimage(q_data_dst->bytesperline, -+ q_data_dst->height, -+ q_data_dst->fmt); -+ update_capture_port = true; -+ } -+ -+ /* If we have a component then setup the port as well */ -+ port = get_port_data(ctx, vq->type); -+ if (!port) -+ return 0; -+ -+ setup_mmal_port_format(ctx, ctx->dev->decode, q_data, port); -+ ret = vchiq_mmal_port_set_format(ctx->dev->instance, port); -+ if (ret) { -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed vchiq_mmal_port_set_format on port, ret %d\n", -+ __func__, ret); -+ ret = -EINVAL; -+ } -+ -+ if (q_data->sizeimage < port->minimum_buffer.size) { -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Current buffer size of %u < min buf size %u - driver mismatch to MMAL\n", -+ __func__, q_data->sizeimage, -+ port->minimum_buffer.size); -+ } -+ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Set format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", -+ f->type, q_data->crop_width, q_data->height, -+ q_data->fmt->fourcc, q_data->sizeimage); -+ -+ if (update_capture_port) { -+ struct vchiq_mmal_port *port_dst = &ctx->component->output[0]; -+ struct bcm2835_codec_q_data *q_data_dst = -+ &ctx->q_data[V4L2_M2M_DST]; -+ -+ setup_mmal_port_format(ctx, ctx->dev->decode, q_data_dst, -+ port_dst); -+ ret = vchiq_mmal_port_set_format(ctx->dev->instance, port_dst); -+ if (ret) { -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed vchiq_mmal_port_set_format on output port, ret %d\n", -+ __func__, ret); -+ ret = -EINVAL; -+ } -+ } -+ return ret; -+} -+ -+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ unsigned int height = f->fmt.pix.height; -+ int ret; -+ -+ ret = vidioc_try_fmt_vid_cap(file, priv, f); -+ if (ret) -+ return ret; -+ -+ return vidioc_s_fmt(file2ctx(file), f, height); -+} -+ -+static int vidioc_s_fmt_vid_out(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ unsigned int height = f->fmt.pix.height; -+ int ret; -+ -+ ret = vidioc_try_fmt_vid_out(file, priv, f); -+ if (ret) -+ return ret; -+ -+ ret = vidioc_s_fmt(file2ctx(file), f, height); -+ return ret; -+} -+ -+static int vidioc_g_selection(struct file *file, void *priv, -+ struct v4l2_selection *s) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ struct bcm2835_codec_q_data *q_data; -+ bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? -+ true : false; -+ -+ if (capture_queue ^ ctx->dev->decode) -+ /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ -+ return -EINVAL; -+ -+ q_data = get_q_data(ctx, s->type); -+ if (!q_data) -+ return -EINVAL; -+ -+ if (ctx->dev->decode) { -+ switch (s->target) { -+ case V4L2_SEL_TGT_COMPOSE_DEFAULT: -+ case V4L2_SEL_TGT_COMPOSE: -+ s->r.left = 0; -+ s->r.top = 0; -+ s->r.width = q_data->crop_width; -+ s->r.height = q_data->crop_height; -+ break; -+ case V4L2_SEL_TGT_COMPOSE_BOUNDS: -+ s->r.left = 0; -+ s->r.top = 0; -+ s->r.width = q_data->crop_width; -+ s->r.height = q_data->crop_height; -+ break; -+ default: -+ return -EINVAL; -+ } -+ } else { -+ switch (s->target) { -+ case V4L2_SEL_TGT_CROP_DEFAULT: -+ case V4L2_SEL_TGT_CROP_BOUNDS: -+ s->r.top = 0; -+ s->r.left = 0; -+ s->r.width = q_data->bytesperline; -+ s->r.height = q_data->height; -+ break; -+ case V4L2_SEL_TGT_CROP: -+ s->r.top = 0; -+ s->r.left = 0; -+ s->r.width = q_data->crop_width; -+ s->r.height = q_data->crop_height; -+ break; -+ default: -+ return -EINVAL; -+ } -+ } -+ -+ return 0; -+} -+ -+static int vidioc_s_selection(struct file *file, void *priv, -+ struct v4l2_selection *s) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ struct bcm2835_codec_q_data *q_data = NULL; -+ bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? -+ true : false; -+ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: ctx %p, type %d, q_data %p, target %d, rect x/y %d/%d, w/h %ux%u\n", -+ __func__, ctx, s->type, q_data, s->target, s->r.left, s->r.top, -+ s->r.width, s->r.height); -+ -+ if (capture_queue ^ ctx->dev->decode) -+ /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ -+ return -EINVAL; -+ -+ q_data = get_q_data(ctx, s->type); -+ if (!q_data) -+ return -EINVAL; -+ -+ if (ctx->dev->decode) { -+ switch (s->target) { -+ case V4L2_SEL_TGT_COMPOSE: -+ /* Accept cropped image */ -+ s->r.left = 0; -+ s->r.top = 0; -+ s->r.width = min(s->r.width, q_data->crop_width); -+ s->r.height = min(s->r.height, q_data->height); -+ q_data->crop_width = s->r.width; -+ q_data->crop_height = s->r.height; -+ q_data->selection_set = true; -+ break; -+ default: -+ return -EINVAL; -+ } -+ } else { -+ switch (s->target) { -+ case V4L2_SEL_TGT_CROP: -+ /* Only support crop from (0,0) */ -+ s->r.top = 0; -+ s->r.left = 0; -+ s->r.width = min(s->r.width, q_data->crop_width); -+ s->r.height = min(s->r.height, q_data->crop_height); -+ q_data->crop_width = s->r.width; -+ q_data->crop_height = s->r.height; -+ q_data->selection_set = true; -+ break; -+ default: -+ return -EINVAL; -+ } -+ } -+ -+ return 0; -+} -+ -+static int vidioc_subscribe_evt(struct v4l2_fh *fh, -+ const struct v4l2_event_subscription *sub) -+{ -+ switch (sub->type) { -+ case V4L2_EVENT_EOS: -+ return v4l2_event_subscribe(fh, sub, 2, NULL); -+ case V4L2_EVENT_SOURCE_CHANGE: -+ return v4l2_src_change_event_subscribe(fh, sub); -+ default: -+ return v4l2_ctrl_subscribe_event(fh, sub); -+ } -+} -+ -+static int bcm2835_codec_set_level_profile(struct bcm2835_codec_ctx *ctx, -+ struct v4l2_ctrl *ctrl) -+{ -+ struct mmal_parameter_video_profile param; -+ int param_size = sizeof(param); -+ int ret; -+ -+ /* -+ * Level and Profile are set via the same MMAL parameter. -+ * Retrieve the current settings and amend the one that has changed. -+ */ -+ ret = vchiq_mmal_port_parameter_get(ctx->dev->instance, -+ &ctx->component->output[0], -+ MMAL_PARAMETER_PROFILE, -+ ¶m, -+ ¶m_size); -+ if (ret) -+ return ret; -+ -+ switch (ctrl->id) { -+ case V4L2_CID_MPEG_VIDEO_H264_PROFILE: -+ switch (ctrl->val) { -+ case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: -+ param.profile = MMAL_VIDEO_PROFILE_H264_BASELINE; -+ break; -+ case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: -+ param.profile = -+ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE; -+ break; -+ case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: -+ param.profile = MMAL_VIDEO_PROFILE_H264_MAIN; -+ break; -+ case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: -+ param.profile = MMAL_VIDEO_PROFILE_H264_HIGH; -+ break; -+ default: -+ /* Should never get here */ -+ break; -+ } -+ break; -+ -+ case V4L2_CID_MPEG_VIDEO_H264_LEVEL: -+ switch (ctrl->val) { -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_0: -+ param.level = MMAL_VIDEO_LEVEL_H264_1; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1B: -+ param.level = MMAL_VIDEO_LEVEL_H264_1b; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_1: -+ param.level = MMAL_VIDEO_LEVEL_H264_11; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_2: -+ param.level = MMAL_VIDEO_LEVEL_H264_12; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_3: -+ param.level = MMAL_VIDEO_LEVEL_H264_13; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_2_0: -+ param.level = MMAL_VIDEO_LEVEL_H264_2; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_2_1: -+ param.level = MMAL_VIDEO_LEVEL_H264_21; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_2_2: -+ param.level = MMAL_VIDEO_LEVEL_H264_22; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_3_0: -+ param.level = MMAL_VIDEO_LEVEL_H264_3; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_3_1: -+ param.level = MMAL_VIDEO_LEVEL_H264_31; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_3_2: -+ param.level = MMAL_VIDEO_LEVEL_H264_32; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_4_0: -+ param.level = MMAL_VIDEO_LEVEL_H264_4; -+ break; -+ default: -+ /* Should never get here */ -+ break; -+ } -+ } -+ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, -+ &ctx->component->output[0], -+ MMAL_PARAMETER_PROFILE, -+ ¶m, -+ param_size); -+ -+ return ret; -+} -+ -+static int bcm2835_codec_s_ctrl(struct v4l2_ctrl *ctrl) -+{ -+ struct bcm2835_codec_ctx *ctx = -+ container_of(ctrl->handler, struct bcm2835_codec_ctx, hdl); -+ int ret = 0; -+ -+ switch (ctrl->id) { -+ case V4L2_CID_MPEG_VIDEO_BITRATE: -+ ctx->bitrate = ctrl->val; -+ if (!ctx->component) -+ break; -+ -+ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, -+ &ctx->component->output[0], -+ MMAL_PARAMETER_VIDEO_BIT_RATE, -+ &ctrl->val, -+ sizeof(ctrl->val)); -+ break; -+ -+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: { -+ u32 bitrate_mode; -+ -+ if (!ctx->component) -+ break; -+ -+ switch (ctrl->val) { -+ default: -+ case V4L2_MPEG_VIDEO_BITRATE_MODE_VBR: -+ bitrate_mode = MMAL_VIDEO_RATECONTROL_VARIABLE; -+ break; -+ case V4L2_MPEG_VIDEO_BITRATE_MODE_CBR: -+ bitrate_mode = MMAL_VIDEO_RATECONTROL_CONSTANT; -+ break; -+ } -+ -+ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, -+ &ctx->component->output[0], -+ MMAL_PARAMETER_RATECONTROL, -+ &bitrate_mode, -+ sizeof(bitrate_mode)); -+ break; -+ } -+ case V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER: -+ if (!ctx->component) -+ break; -+ -+ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, -+ &ctx->component->output[0], -+ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER, -+ &ctrl->val, -+ sizeof(ctrl->val)); -+ break; -+ -+ case V4L2_CID_MPEG_VIDEO_H264_I_PERIOD: -+ if (!ctx->component) -+ break; -+ -+ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, -+ &ctx->component->output[0], -+ MMAL_PARAMETER_INTRAPERIOD, -+ &ctrl->val, -+ sizeof(ctrl->val)); -+ break; -+ -+ case V4L2_CID_MPEG_VIDEO_H264_PROFILE: -+ case V4L2_CID_MPEG_VIDEO_H264_LEVEL: -+ if (!ctx->component) -+ break; -+ -+ ret = bcm2835_codec_set_level_profile(ctx, ctrl); -+ break; -+ -+ default: -+ v4l2_err(&ctx->dev->v4l2_dev, "Invalid control\n"); -+ return -EINVAL; -+ } -+ -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, "Failed setting ctrl %08x, ret %d\n", -+ ctrl->id, ret); -+ return ret ? -EINVAL : 0; -+} -+ -+static const struct v4l2_ctrl_ops bcm2835_codec_ctrl_ops = { -+ .s_ctrl = bcm2835_codec_s_ctrl, -+}; -+ -+static int vidioc_try_decoder_cmd(struct file *file, void *priv, -+ struct v4l2_decoder_cmd *cmd) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ -+ if (!ctx->dev->decode) -+ return -EINVAL; -+ -+ switch (cmd->cmd) { -+ case V4L2_DEC_CMD_STOP: -+ if (cmd->flags & V4L2_DEC_CMD_STOP_TO_BLACK) { -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: DEC cmd->flags=%u stop to black not supported", -+ __func__, cmd->flags); -+ return -EINVAL; -+ } -+ break; -+ case V4L2_DEC_CMD_START: -+ break; -+ default: -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+static int vidioc_decoder_cmd(struct file *file, void *priv, -+ struct v4l2_decoder_cmd *cmd) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ struct bcm2835_codec_q_data *q_data = &ctx->q_data[V4L2_M2M_SRC]; -+ int ret; -+ -+ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s, cmd %u", __func__, -+ cmd->cmd); -+ ret = vidioc_try_decoder_cmd(file, priv, cmd); -+ if (ret) -+ return ret; -+ -+ switch (cmd->cmd) { -+ case V4L2_DEC_CMD_STOP: -+ if (q_data->eos_buffer_in_use) -+ v4l2_err(&ctx->dev->v4l2_dev, "EOS buffers already in use\n"); -+ q_data->eos_buffer_in_use = true; -+ -+ q_data->eos_buffer.mmal.buffer_size = 0; -+ q_data->eos_buffer.mmal.length = 0; -+ q_data->eos_buffer.mmal.mmal_flags = -+ MMAL_BUFFER_HEADER_FLAG_EOS; -+ q_data->eos_buffer.mmal.pts = 0; -+ q_data->eos_buffer.mmal.dts = 0; -+ -+ if (!ctx->component) -+ break; -+ -+ ret = vchiq_mmal_submit_buffer(ctx->dev->instance, -+ &ctx->component->input[0], -+ &q_data->eos_buffer.mmal); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, -+ "%s: EOS buffer submit failed %d\n", -+ __func__, ret); -+ -+ break; -+ -+ case V4L2_DEC_CMD_START: -+ /* Do we need to do anything here? */ -+ break; -+ -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int vidioc_try_encoder_cmd(struct file *file, void *priv, -+ struct v4l2_encoder_cmd *cmd) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ -+ if (ctx->dev->decode) -+ return -EINVAL; -+ -+ switch (cmd->cmd) { -+ case V4L2_ENC_CMD_STOP: -+ break; -+ -+ case V4L2_ENC_CMD_START: -+ /* Do we need to do anything here? */ -+ break; -+ default: -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+static int vidioc_encoder_cmd(struct file *file, void *priv, -+ struct v4l2_encoder_cmd *cmd) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ struct bcm2835_codec_q_data *q_data = &ctx->q_data[V4L2_M2M_SRC]; -+ int ret; -+ -+ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s, cmd %u", __func__, -+ cmd->cmd); -+ ret = vidioc_try_encoder_cmd(file, priv, cmd); -+ if (ret) -+ return ret; -+ -+ switch (cmd->cmd) { -+ case V4L2_ENC_CMD_STOP: -+ if (q_data->eos_buffer_in_use) -+ v4l2_err(&ctx->dev->v4l2_dev, "EOS buffers already in use\n"); -+ q_data->eos_buffer_in_use = true; -+ -+ q_data->eos_buffer.mmal.buffer_size = 0; -+ q_data->eos_buffer.mmal.length = 0; -+ q_data->eos_buffer.mmal.mmal_flags = -+ MMAL_BUFFER_HEADER_FLAG_EOS; -+ q_data->eos_buffer.mmal.pts = 0; -+ q_data->eos_buffer.mmal.dts = 0; -+ -+ if (!ctx->component) -+ break; -+ -+ ret = vchiq_mmal_submit_buffer(ctx->dev->instance, -+ &ctx->component->input[0], -+ &q_data->eos_buffer.mmal); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, -+ "%s: EOS buffer submit failed %d\n", -+ __func__, ret); -+ -+ break; -+ case V4L2_ENC_CMD_START: -+ /* Do we need to do anything here? */ -+ break; -+ -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static const struct v4l2_ioctl_ops bcm2835_codec_ioctl_ops = { -+ .vidioc_querycap = vidioc_querycap, -+ -+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, -+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, -+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, -+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, -+ -+ .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, -+ .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, -+ .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, -+ .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, -+ -+ .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, -+ .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, -+ .vidioc_qbuf = v4l2_m2m_ioctl_qbuf, -+ .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf, -+ .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf, -+ .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs, -+ .vidioc_expbuf = v4l2_m2m_ioctl_expbuf, -+ -+ .vidioc_streamon = v4l2_m2m_ioctl_streamon, -+ .vidioc_streamoff = v4l2_m2m_ioctl_streamoff, -+ -+ .vidioc_g_selection = vidioc_g_selection, -+ .vidioc_s_selection = vidioc_s_selection, -+ -+ .vidioc_subscribe_event = vidioc_subscribe_evt, -+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -+ -+ .vidioc_decoder_cmd = vidioc_decoder_cmd, -+ .vidioc_try_decoder_cmd = vidioc_try_decoder_cmd, -+ .vidioc_encoder_cmd = vidioc_encoder_cmd, -+ .vidioc_try_encoder_cmd = vidioc_try_encoder_cmd, -+}; -+ -+static int bcm2835_codec_set_ctrls(struct bcm2835_codec_ctx *ctx) -+{ -+ /* -+ * Query the control handler for the value of the various controls and -+ * set them. -+ */ -+ const u32 control_ids[] = { -+ V4L2_CID_MPEG_VIDEO_BITRATE_MODE, -+ V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER, -+ V4L2_CID_MPEG_VIDEO_H264_I_PERIOD, -+ V4L2_CID_MPEG_VIDEO_H264_LEVEL, -+ V4L2_CID_MPEG_VIDEO_H264_PROFILE, -+ }; -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(control_ids); i++) { -+ struct v4l2_ctrl *ctrl; -+ -+ ctrl = v4l2_ctrl_find(&ctx->hdl, control_ids[i]); -+ if (ctrl) -+ bcm2835_codec_s_ctrl(ctrl); -+ } -+ -+ return 0; -+} -+ -+static int bcm2835_codec_create_component(struct bcm2835_codec_ctx *ctx) -+{ -+ struct bcm2835_codec_dev *dev = ctx->dev; -+ unsigned int enable = 1; -+ int ret; -+ -+ ret = vchiq_mmal_component_init(dev->instance, dev->decode ? -+ "ril.video_decode" : "ril.video_encode", -+ &ctx->component); -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, "%s: failed to create component for %s\n", -+ __func__, dev->decode ? "decode" : "encode"); -+ return -ENOMEM; -+ } -+ -+ vchiq_mmal_port_parameter_set(dev->instance, &ctx->component->input[0], -+ MMAL_PARAMETER_ZERO_COPY, &enable, -+ sizeof(enable)); -+ vchiq_mmal_port_parameter_set(dev->instance, &ctx->component->output[0], -+ MMAL_PARAMETER_ZERO_COPY, &enable, -+ sizeof(enable)); -+ -+ setup_mmal_port_format(ctx, dev->decode, &ctx->q_data[V4L2_M2M_SRC], -+ &ctx->component->input[0]); -+ -+ setup_mmal_port_format(ctx, dev->decode, &ctx->q_data[V4L2_M2M_DST], -+ &ctx->component->output[0]); -+ -+ ret = vchiq_mmal_port_set_format(dev->instance, -+ &ctx->component->input[0]); -+ if (ret < 0) -+ goto destroy_component; -+ -+ ret = vchiq_mmal_port_set_format(dev->instance, -+ &ctx->component->output[0]); -+ if (ret < 0) -+ goto destroy_component; -+ -+ if (dev->decode) { -+ if (ctx->q_data[V4L2_M2M_DST].sizeimage < -+ ctx->component->output[0].minimum_buffer.size) -+ v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", -+ ctx->q_data[V4L2_M2M_DST].sizeimage, -+ ctx->component->output[0].minimum_buffer.size); -+ } else { -+ if (ctx->q_data[V4L2_M2M_SRC].sizeimage < -+ ctx->component->output[0].minimum_buffer.size) -+ v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", -+ ctx->q_data[V4L2_M2M_SRC].sizeimage, -+ ctx->component->output[0].minimum_buffer.size); -+ -+ /* Now we have a component we can set all the ctrls */ -+ bcm2835_codec_set_ctrls(ctx); -+ } -+ -+ return 0; -+ -+destroy_component: -+ vchiq_mmal_component_finalise(ctx->dev->instance, ctx->component); -+ -+ return ret; -+} -+ -+/* -+ * Queue operations -+ */ -+ -+static int bcm2835_codec_queue_setup(struct vb2_queue *vq, -+ unsigned int *nbuffers, -+ unsigned int *nplanes, -+ unsigned int sizes[], -+ struct device *alloc_devs[]) -+{ -+ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vq); -+ struct bcm2835_codec_q_data *q_data; -+ struct vchiq_mmal_port *port; -+ unsigned int size; -+ -+ q_data = get_q_data(ctx, vq->type); -+ if (!q_data) -+ return -EINVAL; -+ -+ if (!ctx->component) -+ if (bcm2835_codec_create_component(ctx)) -+ return -EINVAL; -+ -+ port = get_port_data(ctx, vq->type); -+ -+ size = q_data->sizeimage; -+ -+ if (*nplanes) -+ return sizes[0] < size ? -EINVAL : 0; -+ -+ *nplanes = 1; -+ -+ sizes[0] = size; -+ port->current_buffer.size = size; -+ -+ if (*nbuffers < port->minimum_buffer.num) -+ *nbuffers = port->minimum_buffer.num; -+ /* Add one buffer to take an EOS */ -+ port->current_buffer.num = *nbuffers + 1; -+ -+ return 0; -+} -+ -+static int bcm2835_codec_buf_init(struct vb2_buffer *vb) -+{ -+ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); -+ struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); -+ struct v4l2_m2m_buffer *m2m = container_of(vb2, struct v4l2_m2m_buffer, -+ vb); -+ struct m2m_mmal_buffer *buf = container_of(m2m, struct m2m_mmal_buffer, -+ m2m); -+ -+ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: ctx:%p, vb %p\n", -+ __func__, ctx, vb); -+ buf->mmal.buffer = vb2_plane_vaddr(&buf->m2m.vb.vb2_buf, 0); -+ buf->mmal.buffer_size = vb2_plane_size(&buf->m2m.vb.vb2_buf, 0); -+ -+ mmal_vchi_buffer_init(ctx->dev->instance, &buf->mmal); -+ -+ return 0; -+} -+ -+static int bcm2835_codec_buf_prepare(struct vb2_buffer *vb) -+{ -+ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); -+ struct bcm2835_codec_q_data *q_data; -+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); -+ struct v4l2_m2m_buffer *m2m = container_of(vbuf, struct v4l2_m2m_buffer, -+ vb); -+ struct m2m_mmal_buffer *buf = container_of(m2m, struct m2m_mmal_buffer, -+ m2m); -+ int ret; -+ -+ v4l2_dbg(4, debug, &ctx->dev->v4l2_dev, "%s: type: %d ptr %p\n", -+ __func__, vb->vb2_queue->type, vb); -+ -+ q_data = get_q_data(ctx, vb->vb2_queue->type); -+ if (V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { -+ if (vbuf->field == V4L2_FIELD_ANY) -+ vbuf->field = V4L2_FIELD_NONE; -+ if (vbuf->field != V4L2_FIELD_NONE) { -+ v4l2_err(&ctx->dev->v4l2_dev, "%s field isn't supported\n", -+ __func__); -+ return -EINVAL; -+ } -+ } -+ -+ if (vb2_plane_size(vb, 0) < q_data->sizeimage) { -+ v4l2_err(&ctx->dev->v4l2_dev, "%s data will not fit into plane (%lu < %lu)\n", -+ __func__, vb2_plane_size(vb, 0), -+ (long)q_data->sizeimage); -+ return -EINVAL; -+ } -+ -+ if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) -+ vb2_set_plane_payload(vb, 0, q_data->sizeimage); -+ -+ /* -+ * We want to do this at init, but vb2_core_expbuf checks that the -+ * index < q->num_buffers, and q->num_buffers only gets updated once -+ * all the buffers are allocated. -+ */ -+ if (!buf->mmal.dma_buf) { -+ ret = vb2_core_expbuf_dmabuf(vb->vb2_queue, -+ vb->vb2_queue->type, vb->index, 0, -+ O_CLOEXEC, &buf->mmal.dma_buf); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed to expbuf idx %d, ret %d\n", -+ __func__, vb->index, ret); -+ } else { -+ ret = 0; -+ } -+ -+ return ret; -+} -+ -+static void bcm2835_codec_buf_queue(struct vb2_buffer *vb) -+{ -+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); -+ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); -+ -+ v4l2_dbg(4, debug, &ctx->dev->v4l2_dev, "%s: type: %d ptr %p vbuf->flags %u, seq %u, bytesused %u\n", -+ __func__, vb->vb2_queue->type, vb, vbuf->flags, vbuf->sequence, -+ vb->planes[0].bytesused); -+ v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf); -+} -+ -+static void bcm2835_codec_buffer_cleanup(struct vb2_buffer *vb) -+{ -+ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); -+ struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); -+ struct v4l2_m2m_buffer *m2m = container_of(vb2, struct v4l2_m2m_buffer, -+ vb); -+ struct m2m_mmal_buffer *buf = container_of(m2m, struct m2m_mmal_buffer, -+ m2m); -+ -+ v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: ctx:%p, vb %p\n", -+ __func__, ctx, vb); -+ -+ mmal_vchi_buffer_cleanup(&buf->mmal); -+ -+ if (buf->mmal.dma_buf) { -+ dma_buf_put(buf->mmal.dma_buf); -+ buf->mmal.dma_buf = NULL; -+ } -+} -+ -+static int bcm2835_codec_start_streaming(struct vb2_queue *q, -+ unsigned int count) -+{ -+ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(q); -+ struct bcm2835_codec_dev *dev = ctx->dev; -+ struct bcm2835_codec_q_data *q_data = get_q_data(ctx, q->type); -+ int ret; -+ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: type: %d count %d\n", -+ __func__, q->type, count); -+ q_data->sequence = 0; -+ -+ if (!ctx->component_enabled) { -+ ret = vchiq_mmal_component_enable(dev->instance, -+ ctx->component); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed enabling component, ret %d\n", -+ __func__, ret); -+ ctx->component_enabled = true; -+ } -+ -+ if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { -+ /* -+ * Create the EOS buffer. -+ * We only need the MMAL part, and want to NOT attach a memory -+ * buffer to it as it should only take flags. -+ */ -+ memset(&q_data->eos_buffer, 0, sizeof(q_data->eos_buffer)); -+ mmal_vchi_buffer_init(dev->instance, -+ &q_data->eos_buffer.mmal); -+ q_data->eos_buffer_in_use = false; -+ -+ ctx->component->input[0].cb_ctx = ctx; -+ ret = vchiq_mmal_port_enable(dev->instance, -+ &ctx->component->input[0], -+ ip_buffer_cb); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed enabling i/p port, ret %d\n", -+ __func__, ret); -+ } else { -+ ctx->component->output[0].cb_ctx = ctx; -+ ret = vchiq_mmal_port_enable(dev->instance, -+ &ctx->component->output[0], -+ op_buffer_cb); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed enabling o/p port, ret %d\n", -+ __func__, ret); -+ } -+ return ret; -+} -+ -+static void bcm2835_codec_stop_streaming(struct vb2_queue *q) -+{ -+ struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(q); -+ struct bcm2835_codec_dev *dev = ctx->dev; -+ struct bcm2835_codec_q_data *q_data = get_q_data(ctx, q->type); -+ struct vchiq_mmal_port *port = get_port_data(ctx, q->type); -+ struct vb2_v4l2_buffer *vbuf; -+ struct vb2_v4l2_buffer *vb2; -+ struct v4l2_m2m_buffer *m2m; -+ struct m2m_mmal_buffer *buf; -+ int ret, i; -+ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: type: %d - return buffers\n", -+ __func__, q->type); -+ -+ init_completion(&ctx->frame_cmplt); -+ -+ /* Clear out all buffers held by m2m framework */ -+ for (;;) { -+ if (V4L2_TYPE_IS_OUTPUT(q->type)) -+ vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); -+ else -+ vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); -+ if (!vbuf) -+ break; -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: return buffer %p\n", -+ __func__, vbuf); -+ -+ v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR); -+ } -+ -+ /* Disable MMAL port - this will flush buffers back */ -+ ret = vchiq_mmal_port_disable(dev->instance, port); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed disabling %s port, ret %d\n", -+ __func__, V4L2_TYPE_IS_OUTPUT(q->type) ? "i/p" : "o/p", -+ ret); -+ -+ while (atomic_read(&port->buffers_with_vpu)) { -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Waiting for buffers to be returned - %d outstanding\n", -+ __func__, atomic_read(&port->buffers_with_vpu)); -+ ret = wait_for_completion_timeout(&ctx->frame_cmplt, HZ); -+ if (ret <= 0) { -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Timeout waiting for buffers to be returned - %d outstanding\n", -+ __func__, -+ atomic_read(&port->buffers_with_vpu)); -+ break; -+ } -+ } -+ -+ /* -+ * Release the VCSM handle here as otherwise REQBUFS(0) aborts because -+ * someone is using the dmabuf before giving the driver a chance to do -+ * anything about it. -+ */ -+ for (i = 0; i < q->num_buffers; i++) { -+ vb2 = to_vb2_v4l2_buffer(q->bufs[i]); -+ m2m = container_of(vb2, struct v4l2_m2m_buffer, vb); -+ buf = container_of(m2m, struct m2m_mmal_buffer, m2m); -+ -+ mmal_vchi_buffer_cleanup(&buf->mmal); -+ if (buf->mmal.dma_buf) { -+ dma_buf_put(buf->mmal.dma_buf); -+ buf->mmal.dma_buf = NULL; -+ } -+ } -+ -+ /* If both ports disabled, then disable the component */ -+ if (!ctx->component->input[0].enabled && -+ !ctx->component->output[0].enabled) { -+ ret = vchiq_mmal_component_disable(dev->instance, -+ ctx->component); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed enabling component, ret %d\n", -+ __func__, ret); -+ } -+ -+ if (V4L2_TYPE_IS_OUTPUT(q->type)) -+ mmal_vchi_buffer_cleanup(&q_data->eos_buffer.mmal); -+ -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: done\n", __func__); -+} -+ -+static const struct vb2_ops bcm2835_codec_qops = { -+ .queue_setup = bcm2835_codec_queue_setup, -+ .buf_init = bcm2835_codec_buf_init, -+ .buf_prepare = bcm2835_codec_buf_prepare, -+ .buf_queue = bcm2835_codec_buf_queue, -+ .buf_cleanup = bcm2835_codec_buffer_cleanup, -+ .start_streaming = bcm2835_codec_start_streaming, -+ .stop_streaming = bcm2835_codec_stop_streaming, -+ .wait_prepare = vb2_ops_wait_prepare, -+ .wait_finish = vb2_ops_wait_finish, -+}; -+ -+static int queue_init(void *priv, struct vb2_queue *src_vq, -+ struct vb2_queue *dst_vq) -+{ -+ struct bcm2835_codec_ctx *ctx = priv; -+ int ret; -+ -+ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; -+ src_vq->io_modes = VB2_MMAP | VB2_DMABUF; -+ src_vq->drv_priv = ctx; -+ src_vq->buf_struct_size = sizeof(struct m2m_mmal_buffer); -+ src_vq->ops = &bcm2835_codec_qops; -+ src_vq->mem_ops = &vb2_dma_contig_memops; -+ src_vq->dev = &ctx->dev->pdev->dev; -+ src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; -+ src_vq->lock = &ctx->dev->dev_mutex; -+ -+ ret = vb2_queue_init(src_vq); -+ if (ret) -+ return ret; -+ -+ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; -+ dst_vq->io_modes = VB2_MMAP | VB2_DMABUF; -+ dst_vq->drv_priv = ctx; -+ dst_vq->buf_struct_size = sizeof(struct m2m_mmal_buffer); -+ dst_vq->ops = &bcm2835_codec_qops; -+ dst_vq->mem_ops = &vb2_dma_contig_memops; -+ dst_vq->dev = &ctx->dev->pdev->dev; -+ dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; -+ dst_vq->lock = &ctx->dev->dev_mutex; -+ -+ return vb2_queue_init(dst_vq); -+} -+ -+/* -+ * File operations -+ */ -+static int bcm2835_codec_open(struct file *file) -+{ -+ struct bcm2835_codec_dev *dev = video_drvdata(file); -+ struct bcm2835_codec_ctx *ctx = NULL; -+ struct v4l2_ctrl_handler *hdl; -+ int rc = 0; -+ -+ v4l2_dbg(1, debug, &dev->v4l2_dev, "Creating instance for %s\n", -+ dev->decode ? "decode" : "encode"); -+ if (mutex_lock_interruptible(&dev->dev_mutex)) { -+ v4l2_err(&dev->v4l2_dev, "Mutex fail\n"); -+ return -ERESTARTSYS; -+ } -+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); -+ if (!ctx) { -+ rc = -ENOMEM; -+ goto open_unlock; -+ } -+ -+ ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev->decode, false); -+ ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev->decode, true); -+ if (dev->decode) { -+ /* -+ * Input width and height are irrelevant as they will be defined -+ * by the bitstream not the format. Required by V4L2 though. -+ */ -+ ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; -+ ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_SRC].bytesperline = 0; -+ ctx->q_data[V4L2_M2M_SRC].sizeimage = -+ DEF_COMP_BUF_SIZE_720P_OR_LESS; -+ -+ ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; -+ ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_DST].bytesperline = -+ get_bytesperline(DEFAULT_WIDTH, -+ ctx->q_data[V4L2_M2M_DST].fmt); -+ ctx->q_data[V4L2_M2M_DST].sizeimage = -+ get_sizeimage(ctx->q_data[V4L2_M2M_DST].bytesperline, -+ ctx->q_data[V4L2_M2M_DST].height, -+ ctx->q_data[V4L2_M2M_DST].fmt); -+ } else { -+ ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; -+ ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_SRC].bytesperline = -+ get_bytesperline(DEFAULT_WIDTH, -+ ctx->q_data[V4L2_M2M_SRC].fmt); -+ ctx->q_data[V4L2_M2M_SRC].sizeimage = -+ get_sizeimage(ctx->q_data[V4L2_M2M_SRC].bytesperline, -+ ctx->q_data[V4L2_M2M_SRC].height, -+ ctx->q_data[V4L2_M2M_SRC].fmt); -+ -+ ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; -+ ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_DST].bytesperline = 0; -+ ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_DST].sizeimage = -+ DEF_COMP_BUF_SIZE_720P_OR_LESS; -+ } -+ -+ ctx->colorspace = V4L2_COLORSPACE_REC709; -+ ctx->bitrate = 10 * 1000 * 1000; -+ -+ /* Initialise V4L2 contexts */ -+ v4l2_fh_init(&ctx->fh, video_devdata(file)); -+ file->private_data = &ctx->fh; -+ ctx->dev = dev; -+ hdl = &ctx->hdl; -+ if (!dev->decode) { -+ /* Encode controls */ -+ v4l2_ctrl_handler_init(hdl, 6); -+ -+ v4l2_ctrl_new_std_menu(hdl, &bcm2835_codec_ctrl_ops, -+ V4L2_CID_MPEG_VIDEO_BITRATE_MODE, -+ V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0, -+ V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); -+ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, -+ V4L2_CID_MPEG_VIDEO_BITRATE, -+ 25 * 1000, 25 * 1000 * 1000, -+ 25 * 1000, 10 * 1000 * 1000); -+ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, -+ V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER, -+ 0, 1, -+ 1, 0); -+ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, -+ V4L2_CID_MPEG_VIDEO_H264_I_PERIOD, -+ 0, 0x7FFFFFFF, -+ 1, 60); -+ v4l2_ctrl_new_std_menu(hdl, &bcm2835_codec_ctrl_ops, -+ V4L2_CID_MPEG_VIDEO_H264_LEVEL, -+ V4L2_MPEG_VIDEO_H264_LEVEL_4_2, -+ ~(BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_0) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1B) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_1) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_2) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_3) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_2_0) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_2_1) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_2_2) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_3_0) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_3_1) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_3_2) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_4_0) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_4_1) | -+ BIT(V4L2_MPEG_VIDEO_H264_LEVEL_4_2)), -+ V4L2_MPEG_VIDEO_H264_LEVEL_4_0); -+ v4l2_ctrl_new_std_menu(hdl, &bcm2835_codec_ctrl_ops, -+ V4L2_CID_MPEG_VIDEO_H264_PROFILE, -+ V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, -+ ~(BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) | -+ BIT(V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE) | -+ BIT(V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) | -+ BIT(V4L2_MPEG_VIDEO_H264_PROFILE_HIGH)), -+ V4L2_MPEG_VIDEO_H264_PROFILE_HIGH); -+ if (hdl->error) { -+ rc = hdl->error; -+ goto free_ctrl_handler; -+ } -+ ctx->fh.ctrl_handler = hdl; -+ v4l2_ctrl_handler_setup(hdl); -+ } -+ -+ ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); -+ -+ if (IS_ERR(ctx->fh.m2m_ctx)) { -+ rc = PTR_ERR(ctx->fh.m2m_ctx); -+ -+ goto free_ctrl_handler; -+ } -+ -+ /* Set both queues as buffered as we have buffering in the VPU. That -+ * means that we will be scheduled whenever either an input or output -+ * buffer is available (otherwise one of each are required). -+ */ -+ v4l2_m2m_set_src_buffered(ctx->fh.m2m_ctx, true); -+ v4l2_m2m_set_dst_buffered(ctx->fh.m2m_ctx, true); -+ -+ v4l2_fh_add(&ctx->fh); -+ atomic_inc(&dev->num_inst); -+ -+ mutex_unlock(&dev->dev_mutex); -+ return 0; -+ -+free_ctrl_handler: -+ v4l2_ctrl_handler_free(hdl); -+ kfree(ctx); -+open_unlock: -+ mutex_unlock(&dev->dev_mutex); -+ return rc; -+} -+ -+static int bcm2835_codec_release(struct file *file) -+{ -+ struct bcm2835_codec_dev *dev = video_drvdata(file); -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ -+ v4l2_dbg(1, debug, &dev->v4l2_dev, "%s: Releasing instance %p\n", -+ __func__, ctx); -+ -+ v4l2_fh_del(&ctx->fh); -+ v4l2_fh_exit(&ctx->fh); -+ v4l2_ctrl_handler_free(&ctx->hdl); -+ mutex_lock(&dev->dev_mutex); -+ v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); -+ -+ if (ctx->component) -+ vchiq_mmal_component_finalise(dev->instance, ctx->component); -+ -+ mutex_unlock(&dev->dev_mutex); -+ kfree(ctx); -+ -+ atomic_dec(&dev->num_inst); -+ -+ return 0; -+} -+ -+static const struct v4l2_file_operations bcm2835_codec_fops = { -+ .owner = THIS_MODULE, -+ .open = bcm2835_codec_open, -+ .release = bcm2835_codec_release, -+ .poll = v4l2_m2m_fop_poll, -+ .unlocked_ioctl = video_ioctl2, -+ .mmap = v4l2_m2m_fop_mmap, -+}; -+ -+static const struct video_device bcm2835_codec_videodev = { -+ .name = MEM2MEM_NAME, -+ .vfl_dir = VFL_DIR_M2M, -+ .fops = &bcm2835_codec_fops, -+ .ioctl_ops = &bcm2835_codec_ioctl_ops, -+ .minor = -1, -+ .release = video_device_release_empty, -+}; -+ -+static const struct v4l2_m2m_ops m2m_ops = { -+ .device_run = device_run, -+ .job_ready = job_ready, -+ .job_abort = job_abort, -+}; -+ -+static int bcm2835_codec_create(struct platform_device *pdev, -+ struct bcm2835_codec_dev **new_dev, -+ bool decode) -+{ -+ struct bcm2835_codec_dev *dev; -+ struct video_device *vfd; -+ struct vchiq_mmal_instance *instance = NULL; -+ int video_nr; -+ int ret; -+ -+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); -+ if (!dev) -+ return -ENOMEM; -+ -+ dev->pdev = pdev; -+ -+ dev->decode = decode; -+ -+ ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); -+ if (ret) -+ return ret; -+ -+ atomic_set(&dev->num_inst, 0); -+ mutex_init(&dev->dev_mutex); -+ -+ dev->vfd = bcm2835_codec_videodev; -+ vfd = &dev->vfd; -+ vfd->lock = &dev->dev_mutex; -+ vfd->v4l2_dev = &dev->v4l2_dev; -+ -+ if (dev->decode) { -+ v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD); -+ v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); -+ video_nr = decode_video_nr; -+ } else { -+ v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); -+ v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); -+ video_nr = encode_video_nr; -+ } -+ -+ ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); -+ if (ret) { -+ v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); -+ goto unreg_dev; -+ } -+ -+ video_set_drvdata(vfd, dev); -+ snprintf(vfd->name, sizeof(vfd->name), "%s", -+ bcm2835_codec_videodev.name); -+ v4l2_info(&dev->v4l2_dev, "Device registered as /dev/video%d\n", -+ vfd->num); -+ -+ *new_dev = dev; -+ -+ dev->m2m_dev = v4l2_m2m_init(&m2m_ops); -+ if (IS_ERR(dev->m2m_dev)) { -+ v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n"); -+ ret = PTR_ERR(dev->m2m_dev); -+ goto err_m2m; -+ } -+ -+ ret = vchiq_mmal_init(&instance); -+ if (ret < 0) -+ goto err_m2m; -+ dev->instance = instance; -+ -+ v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s codec\n", -+ dev->decode ? "decode" : "encode"); -+ return 0; -+ -+err_m2m: -+ v4l2_m2m_release(dev->m2m_dev); -+ video_unregister_device(&dev->vfd); -+unreg_dev: -+ v4l2_device_unregister(&dev->v4l2_dev); -+ -+ return ret; -+} -+ -+static int bcm2835_codec_destroy(struct bcm2835_codec_dev *dev) -+{ -+ if (!dev) -+ return -ENODEV; -+ -+ v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME); -+ v4l2_m2m_release(dev->m2m_dev); -+ video_unregister_device(&dev->vfd); -+ v4l2_device_unregister(&dev->v4l2_dev); -+ -+ return 0; -+} -+ -+static int bcm2835_codec_probe(struct platform_device *pdev) -+{ -+ struct bcm2835_codec_driver *drv; -+ int ret = 0; -+ -+ drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); -+ if (!drv) -+ return -ENOMEM; -+ -+ ret = bcm2835_codec_create(pdev, &drv->encode, false); -+ if (ret) -+ goto out; -+ -+ ret = bcm2835_codec_create(pdev, &drv->decode, true); -+ if (ret) -+ goto out; -+ -+ platform_set_drvdata(pdev, drv); -+ -+ return 0; -+ -+out: -+ if (drv->encode) { -+ bcm2835_codec_destroy(drv->encode); -+ drv->encode = NULL; -+ } -+ return ret; -+} -+ -+static int bcm2835_codec_remove(struct platform_device *pdev) -+{ -+ struct bcm2835_codec_driver *drv = platform_get_drvdata(pdev); -+ -+ bcm2835_codec_destroy(drv->encode); -+ -+ bcm2835_codec_destroy(drv->decode); -+ -+ return 0; -+} -+ -+static struct platform_driver bcm2835_v4l2_codec_driver = { -+ .probe = bcm2835_codec_probe, -+ .remove = bcm2835_codec_remove, -+ .driver = { -+ .name = "bcm2835-codec", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+module_platform_driver(bcm2835_v4l2_codec_driver); -+ -+MODULE_DESCRIPTION("BCM2835 codec V4L2 driver"); -+MODULE_AUTHOR("Dave Stevenson, "); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION("0.0.1"); -+MODULE_ALIAS("platform:bcm2835-codec"); diff --git a/target/linux/brcm2708/patches-4.19/950-0277-dwc_otg-fix-bug-with-port_addr-assignment-for-single.patch b/target/linux/brcm2708/patches-4.19/950-0277-dwc_otg-fix-bug-with-port_addr-assignment-for-single.patch new file mode 100644 index 0000000000..fd5f88ff03 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0277-dwc_otg-fix-bug-with-port_addr-assignment-for-single.patch @@ -0,0 +1,28 @@ +From 6e56da00afdf11416045213552514d10bab845cc Mon Sep 17 00:00:00 2001 +From: P33M +Date: Wed, 16 Jan 2019 10:17:52 +0000 +Subject: [PATCH] dwc_otg: fix bug with port_addr assignment for + single-TT hubs + +See https://github.com/raspberrypi/linux/issues/2734 + +The "Hub Port" field in the split transaction packet was always set +to 1 for single-TT hubs. The majority of single-TT hub products +apparently ignore this field and broadcast to all downstream enabled +ports, which masked the issue. A subset of hub devices apparently +need the port number to be exact or split transactions will fail. +--- + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -232,7 +232,7 @@ static int _hub_info(dwc_otg_hcd_t * hcd + else + *hub_addr = urb->dev->tt->hub->devnum; + } +- *port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1; ++ *port_addr = urb->dev->ttport; + } else { + *hub_addr = 0; + *port_addr = urb->dev->ttport; diff --git a/target/linux/brcm2708/patches-4.19/950-0277-staging-vchiq_arm-Register-bcm2835-codec-as-a-platfo.patch b/target/linux/brcm2708/patches-4.19/950-0277-staging-vchiq_arm-Register-bcm2835-codec-as-a-platfo.patch deleted file mode 100644 index 2325697c85..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0277-staging-vchiq_arm-Register-bcm2835-codec-as-a-platfo.patch +++ /dev/null @@ -1,34 +0,0 @@ -From b28dac3003b4c756b72201bb1d83647e33e2f4f1 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 26 Oct 2018 15:14:16 +0100 -Subject: [PATCH 277/806] staging: vchiq_arm: Register bcm2835-codec as a - platform driver - -Following the same pattern as bcm2835-camera and bcm2835-audio, -register the V4L2 codec driver as a platform driver - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -171,6 +171,7 @@ static struct device *vchiq_dev; - static DEFINE_SPINLOCK(msg_queue_spinlock); - static struct platform_device *bcm2835_camera; - static struct platform_device *bcm2835_audio; -+static struct platform_device *bcm2835_codec; - - static const char *const ioctl_names[] = { - "CONNECT", -@@ -3660,6 +3661,9 @@ static int vchiq_probe(struct platform_d - bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio"); - if (IS_ERR(bcm2835_audio)) - bcm2835_audio = NULL; -+ bcm2835_codec = vchiq_register_child(pdev, "bcm2835-codec"); -+ if (IS_ERR(bcm2835_codec)) -+ bcm2835_codec = NULL; - - return 0; - diff --git a/target/linux/brcm2708/patches-4.19/950-0278-Added-driver-for-the-HiFiBerry-DAC-ADC-2694.patch b/target/linux/brcm2708/patches-4.19/950-0278-Added-driver-for-the-HiFiBerry-DAC-ADC-2694.patch new file mode 100644 index 0000000000..9cd839e045 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0278-Added-driver-for-the-HiFiBerry-DAC-ADC-2694.patch @@ -0,0 +1,576 @@ +From dde0ec6b9fd5755de3a8962489cde9c0ce5e5005 Mon Sep 17 00:00:00 2001 +From: HiFiBerry +Date: Mon, 8 Oct 2018 18:10:12 +0200 +Subject: [PATCH] Added driver for the HiFiBerry DAC+ ADC (#2694) + +Signed-off-by: Daniel Matuschek +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 21 + + .../overlays/hifiberry-dacplusadc-overlay.dts | 71 +++ + sound/soc/bcm/Kconfig | 8 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/hifiberry_dacplusadc.c | 407 ++++++++++++++++++ + 8 files changed, 512 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts + create mode 100644 sound/soc/bcm/hifiberry_dacplusadc.c + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -49,6 +49,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + hifiberry-amp.dtbo \ + hifiberry-dac.dtbo \ + hifiberry-dacplus.dtbo \ ++ hifiberry-dacplusadc.dtbo \ + hifiberry-digi.dtbo \ + hifiberry-digi-pro.dtbo \ + hy28a.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -779,6 +779,27 @@ Params: 24db_digital_gain Allow ga + master for bit clock and frame clock. + + ++Name: hifiberry-dacplusadc ++Info: Configures the HifiBerry DAC+ADC audio card ++Load: dtoverlay=hifiberry-dacplusadc,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=hifiberry-dacplus,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ slave Force DAC+ Pro into slave mode, using Pi as ++ master for bit clock and frame clock. ++ ++ + Name: hifiberry-digi + Info: Configures the HifiBerry Digi and Digi+ audio card + Load: dtoverlay=hifiberry-digi +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts +@@ -0,0 +1,71 @@ ++// Definitions for HiFiBerry DAC+ADC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/clocks"; ++ __overlay__ { ++ dacpro_osc: dacpro_osc { ++ compatible = "hifiberry,dacpro-clk"; ++ #clock-cells = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm_codec: pcm5122@4d { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4d>; ++ clocks = <&dacpro_osc>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/"; ++ __overlay__ { ++ dmic { ++ #sound-dai-cells = <0>; ++ compatible = "dmic-codec"; ++ num-channels = <2>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&sound>; ++ hifiberry_dacplusadc: __overlay__ { ++ compatible = "hifiberry,hifiberry-dacplusadc"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = ++ <&hifiberry_dacplusadc>,"hifiberry,24db_digital_gain?"; ++ slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?"; ++ }; ++}; +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -46,6 +46,14 @@ config SND_BCM2708_SOC_HIFIBERRY_DACPLUS + help + Say Y or M if you want to add support for HifiBerry DAC+. + ++config SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC ++ tristate "Support for HifiBerry DAC+ADC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x_I2C ++ select SND_SOC_DMIC ++ help ++ Say Y or M if you want to add support for HifiBerry DAC+ADC. ++ + config SND_BCM2708_SOC_HIFIBERRY_DIGI + tristate "Support for HifiBerry Digi" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -14,6 +14,7 @@ snd-soc-googlevoicehat-codec-objs := goo + # BCM2708 Machine Support + snd-soc-3dlab-nano-player-objs := 3dlab-nano-player.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o ++snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o + snd-soc-justboom-dac-objs := justboom-dac.o + snd-soc-rpi-cirrus-objs := rpi-cirrus.o + snd-soc-rpi-proto-objs := rpi-proto.o +@@ -36,6 +37,7 @@ snd-soc-rpi-wm8804-soundcard-objs := rpi + obj-$(CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER) += snd-soc-3dlab-nano-player.o + obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o + obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_dacplusadc.c +@@ -0,0 +1,407 @@ ++/* ++ * ASoC Driver for HiFiBerry DAC+ / DAC Pro with ADC ++ * ++ * Author: Daniel Matuschek, Stuart MacLean ++ * Copyright 2014-2015 ++ * based on code by Florian Meier ++ * ADC added by Joerg Schambacher ++ * Copyright 2018 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/pcm512x.h" ++ ++#define HIFIBERRY_DACPRO_NOCLOCK 0 ++#define HIFIBERRY_DACPRO_CLK44EN 1 ++#define HIFIBERRY_DACPRO_CLK48EN 2 ++ ++struct platform_device *dmic_codec_dev; ++ ++struct pcm512x_priv { ++ struct regmap *regmap; ++ struct clk *sclk; ++}; ++ ++/* Clock rate of CLK44EN attached to GPIO6 pin */ ++#define CLK_44EN_RATE 22579200UL ++/* Clock rate of CLK48EN attached to GPIO3 pin */ ++#define CLK_48EN_RATE 24576000UL ++ ++static bool slave; ++static bool snd_rpi_hifiberry_is_dacpro; ++static bool digital_gain_0db_limit = true; ++ ++static void snd_rpi_hifiberry_dacplusadc_select_clk(struct snd_soc_component *component, ++ int clk_id) ++{ ++ switch (clk_id) { ++ case HIFIBERRY_DACPRO_NOCLOCK: ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x24, 0x00); ++ break; ++ case HIFIBERRY_DACPRO_CLK44EN: ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x24, 0x20); ++ break; ++ case HIFIBERRY_DACPRO_CLK48EN: ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x24, 0x04); ++ break; ++ } ++} ++ ++static void snd_rpi_hifiberry_dacplusadc_clk_gpio(struct snd_soc_component *component) ++{ ++ snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x24, 0x24); ++ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_3, 0x0f, 0x02); ++ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_6, 0x0f, 0x02); ++} ++ ++static bool snd_rpi_hifiberry_dacplusadc_is_sclk(struct snd_soc_component *component) ++{ ++ unsigned int sck; ++ ++ snd_soc_component_read(component, PCM512x_RATE_DET_4, &sck); ++ return (!(sck & 0x40)); ++} ++ ++static bool snd_rpi_hifiberry_dacplusadc_is_sclk_sleep( ++ struct snd_soc_component *component) ++{ ++ msleep(2); ++ return snd_rpi_hifiberry_dacplusadc_is_sclk(component); ++} ++ ++static bool snd_rpi_hifiberry_dacplusadc_is_pro_card(struct snd_soc_component *component) ++{ ++ bool isClk44EN, isClk48En, isNoClk; ++ ++ snd_rpi_hifiberry_dacplusadc_clk_gpio(component); ++ ++ snd_rpi_hifiberry_dacplusadc_select_clk(component, HIFIBERRY_DACPRO_CLK44EN); ++ isClk44EN = snd_rpi_hifiberry_dacplusadc_is_sclk_sleep(component); ++ ++ snd_rpi_hifiberry_dacplusadc_select_clk(component, HIFIBERRY_DACPRO_NOCLOCK); ++ isNoClk = snd_rpi_hifiberry_dacplusadc_is_sclk_sleep(component); ++ ++ snd_rpi_hifiberry_dacplusadc_select_clk(component, HIFIBERRY_DACPRO_CLK48EN); ++ isClk48En = snd_rpi_hifiberry_dacplusadc_is_sclk_sleep(component); ++ ++ return (isClk44EN && isClk48En && !isNoClk); ++} ++ ++static int snd_rpi_hifiberry_dacplusadc_clk_for_rate(int sample_rate) ++{ ++ int type; ++ ++ switch (sample_rate) { ++ case 11025: ++ case 22050: ++ case 44100: ++ case 88200: ++ case 176400: ++ case 352800: ++ type = HIFIBERRY_DACPRO_CLK44EN; ++ break; ++ default: ++ type = HIFIBERRY_DACPRO_CLK48EN; ++ break; ++ } ++ return type; ++} ++ ++static void snd_rpi_hifiberry_dacplusadc_set_sclk(struct snd_soc_component *component, ++ int sample_rate) ++{ ++ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); ++ ++ if (!IS_ERR(pcm512x->sclk)) { ++ int ctype; ++ ++ ctype = snd_rpi_hifiberry_dacplusadc_clk_for_rate(sample_rate); ++ clk_set_rate(pcm512x->sclk, (ctype == HIFIBERRY_DACPRO_CLK44EN) ++ ? CLK_44EN_RATE : CLK_48EN_RATE); ++ snd_rpi_hifiberry_dacplusadc_select_clk(component, ctype); ++ } ++} ++ ++static int snd_rpi_hifiberry_dacplusadc_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_component *component = rtd->codec_dai->component; ++ struct pcm512x_priv *priv; ++ ++ if (slave) ++ snd_rpi_hifiberry_is_dacpro = false; ++ else ++ snd_rpi_hifiberry_is_dacpro = ++ snd_rpi_hifiberry_dacplusadc_is_pro_card(component); ++ ++ if (snd_rpi_hifiberry_is_dacpro) { ++ struct snd_soc_dai_link *dai = rtd->dai_link; ++ ++ dai->name = "HiFiBerry ADCDAC+ Pro"; ++ dai->stream_name = "HiFiBerry ADCDAC+ Pro HiFi"; ++ dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM; ++ ++ snd_soc_component_update_bits(component, PCM512x_BCLK_LRCLK_CFG, 0x31, 0x11); ++ snd_soc_component_update_bits(component, PCM512x_MASTER_MODE, 0x03, 0x03); ++ snd_soc_component_update_bits(component, PCM512x_MASTER_CLKDIV_2, 0x7f, 63); ++ } else { ++ priv = snd_soc_component_get_drvdata(component); ++ priv->sclk = ERR_PTR(-ENOENT); ++ } ++ ++ snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x08, 0x08); ++ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ ++ if (digital_gain_0db_limit) { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dacplusadc_update_rate_den( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_component *component = rtd->codec_dai->component; ++ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); ++ struct snd_ratnum *rats_no_pll; ++ unsigned int num = 0, den = 0; ++ int err; ++ ++ rats_no_pll = devm_kzalloc(rtd->dev, sizeof(*rats_no_pll), GFP_KERNEL); ++ if (!rats_no_pll) ++ return -ENOMEM; ++ ++ rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64; ++ rats_no_pll->den_min = 1; ++ rats_no_pll->den_max = 128; ++ rats_no_pll->den_step = 1; ++ ++ err = snd_interval_ratnum(hw_param_interval(params, ++ SNDRV_PCM_HW_PARAM_RATE), 1, rats_no_pll, &num, &den); ++ if (err >= 0 && den) { ++ params->rate_num = num; ++ params->rate_den = den; ++ } ++ ++ devm_kfree(rtd->dev, rats_no_pll); ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dacplusadc_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ int ret = 0; ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ int channels = params_channels(params); ++ int width = 32; ++ ++ if (snd_rpi_hifiberry_is_dacpro) { ++ struct snd_soc_component *component = rtd->codec_dai->component; ++ ++ width = snd_pcm_format_physical_width(params_format(params)); ++ ++ snd_rpi_hifiberry_dacplusadc_set_sclk(component, ++ params_rate(params)); ++ ++ ret = snd_rpi_hifiberry_dacplusadc_update_rate_den( ++ substream, params); ++ } ++ ++ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x03, 0x03, ++ channels, width); ++ if (ret) ++ return ret; ++ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0x03, 0x03, ++ channels, width); ++ return ret; ++} ++ ++static int hifiberry_dacplusadc_LED_cnt; ++ ++static int snd_rpi_hifiberry_dacplusadc_startup( ++ struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_component *component = rtd->codec_dai->component; ++ ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, ++ 0x08, 0x08); ++ hifiberry_dacplusadc_LED_cnt++; ++ return 0; ++} ++ ++static void snd_rpi_hifiberry_dacplusadc_shutdown( ++ struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_component *component = rtd->codec_dai->component; ++ ++ hifiberry_dacplusadc_LED_cnt--; ++ if (!hifiberry_dacplusadc_LED_cnt) ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, ++ 0x08, 0x00); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_hifiberry_dacplusadc_ops = { ++ .hw_params = snd_rpi_hifiberry_dacplusadc_hw_params, ++ .startup = snd_rpi_hifiberry_dacplusadc_startup, ++ .shutdown = snd_rpi_hifiberry_dacplusadc_shutdown, ++}; ++ ++static struct snd_soc_dai_link_component snd_rpi_hifiberry_dacplusadc_codecs[] = { ++ { ++ .name = "pcm512x.1-004d", ++ .dai_name = "pcm512x-hifi", ++ }, ++ { ++ .name = "dmic-codec", ++ .dai_name = "dmic-hifi", ++ }, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_dacplusadc_dai[] = { ++{ ++ .name = "HiFiBerry DAC+ADC", ++ .stream_name = "HiFiBerry DAC+ADC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .platform_name = "bcm2708-i2s.0", ++ .codecs = snd_rpi_hifiberry_dacplusadc_codecs, ++ .num_codecs = 2, ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_hifiberry_dacplusadc_ops, ++ .init = snd_rpi_hifiberry_dacplusadc_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_hifiberry_dacplusadc = { ++ .name = "snd_rpi_hifiberry_dacplusadc", ++ .driver_name = "HifiberryDacpAdc", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_dacplusadc_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dacplusadc_dai), ++}; ++ ++ ++static int snd_rpi_hifiberry_dacplusadc_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_hifiberry_dacplusadc.dev = &pdev->dev; ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai; ++ ++ dai = &snd_rpi_hifiberry_dacplusadc_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ if (i2s_node) { ++ dai->cpu_of_node = i2s_node; ++ dai->platform_of_node = i2s_node; ++ dai->cpu_dai_name = NULL; ++ dai->platform_name = NULL; ++ } ++ dai = &snd_rpi_hifiberry_dacplusadc_dai[1]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, "dmic", 0); ++ if (i2s_node) { ++ dai->cpu_of_node = i2s_node; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ } ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "hifiberry,24db_digital_gain"); ++ slave = of_property_read_bool(pdev->dev.of_node, ++ "hifiberry-dacplusadc,slave"); ++ ++ ret = devm_snd_soc_register_card(&pdev->dev, ++ &snd_rpi_hifiberry_dacplusadc); ++ if (ret && ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static const struct of_device_id snd_rpi_hifiberry_dacplusadc_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-dacplusadc", }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplusadc_of_match); ++ ++static struct platform_driver snd_rpi_hifiberry_dacplusadc_driver = { ++ .driver = { ++ .name = "snd-rpi-hifiberry-dacplusadc", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_dacplusadc_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_dacplusadc_probe, ++}; ++ ++static int __init hifiberry_dacplusadc_init(void) ++{ ++ int ret; ++ ++ dmic_codec_dev = platform_device_register_simple("dmic-codec", -1, NULL, ++ 0); ++ if (IS_ERR(dmic_codec_dev)) { ++ pr_err("%s: dmic-codec device registration failed\n", __func__); ++ return PTR_ERR(dmic_codec_dev); ++ } ++ ++ ret = platform_driver_register(&snd_rpi_hifiberry_dacplusadc_driver); ++ if (ret) { ++ pr_err("%s: platform driver registration failed\n", __func__); ++ platform_device_unregister(dmic_codec_dev); ++ } ++ ++ return ret; ++} ++module_init(hifiberry_dacplusadc_init); ++ ++static void __exit hifiberry_dacplusadc_exit(void) ++{ ++ platform_driver_unregister(&snd_rpi_hifiberry_dacplusadc_driver); ++ platform_device_unregister(dmic_codec_dev); ++} ++module_exit(hifiberry_dacplusadc_exit); ++ ++MODULE_AUTHOR("Joerg Schambacher "); ++MODULE_AUTHOR("Daniel Matuschek "); ++MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+ADC"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.19/950-0278-staging-vchiq_arm-Register-vcsm-cma-as-a-platform-dr.patch b/target/linux/brcm2708/patches-4.19/950-0278-staging-vchiq_arm-Register-vcsm-cma-as-a-platform-dr.patch deleted file mode 100644 index a34e5d7f17..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0278-staging-vchiq_arm-Register-vcsm-cma-as-a-platform-dr.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 69c5c6d62b457ee88e55c4090dc09c0441b059f2 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 26 Oct 2018 15:19:40 +0100 -Subject: [PATCH 278/806] staging: vchiq_arm: Register vcsm-cma as a platform - driver - -Following the same pattern as bcm2835-camera and bcm2835-audio, -register the vcsm-cma driver as a platform driver - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -172,6 +172,7 @@ static DEFINE_SPINLOCK(msg_queue_spinloc - static struct platform_device *bcm2835_camera; - static struct platform_device *bcm2835_audio; - static struct platform_device *bcm2835_codec; -+static struct platform_device *vcsm_cma; - - static const char *const ioctl_names[] = { - "CONNECT", -@@ -3655,6 +3656,9 @@ static int vchiq_probe(struct platform_d - VCHIQ_VERSION, VCHIQ_VERSION_MIN, - MAJOR(vchiq_devid), MINOR(vchiq_devid)); - -+ vcsm_cma = vchiq_register_child(pdev, "vcsm-cma"); -+ if (IS_ERR(vcsm_cma)) -+ vcsm_cma = NULL; - bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); - if (IS_ERR(bcm2835_camera)) - bcm2835_camera = NULL; diff --git a/target/linux/brcm2708/patches-4.19/950-0279-pwm-Send-a-uevent-on-the-pwmchip-device-upon-channel.patch b/target/linux/brcm2708/patches-4.19/950-0279-pwm-Send-a-uevent-on-the-pwmchip-device-upon-channel.patch new file mode 100644 index 0000000000..8136e3ffa0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0279-pwm-Send-a-uevent-on-the-pwmchip-device-upon-channel.patch @@ -0,0 +1,86 @@ +From 20a5b38305df30e25b4429e0e34e35235dd57228 Mon Sep 17 00:00:00 2001 +From: Fabrice Gasnier +Date: Mon, 1 Oct 2018 15:23:57 +0200 +Subject: [PATCH] pwm: Send a uevent on the pwmchip device upon channel + sysfs (un)export +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +commit 552c02e3e7cfe2744b59de285aaea70021ae95c9 upstream. + +This patch sends a uevent (KOBJ_CHANGE) on the pwmchipN device, +everytime a pwmX channel has been exported/unexported via sysfs. This +allows udev to implement rules on such events, like: + +SUBSYSTEM=="pwm*", PROGRAM="/bin/sh -c '\ + chown -R root:gpio /sys/class/pwm && chmod -R 770 /sys/class/pwm;\ + chown -R root:gpio +/sys/devices/platform/soc/*.pwm/pwm/pwmchip* && chmod -R 770 +/sys/devices/platform/soc/*.pwm/pwm/pwmchip*\ +'" + +This is a replacement patch for commit 7e5d1fd75c3d ("pwm: Set class for +exported channels in sysfs"), see [1]. + +basic testing: +$ udevadm monitor --environment & +$ echo 0 > /sys/class/pwm/pwmchip0/export +KERNEL[197.321736] change /devices/.../pwm/pwmchip0 (pwm) +ACTION=change +DEVPATH=/devices/.../pwm/pwmchip0 +EXPORT=pwm0 +SEQNUM=2045 +SUBSYSTEM=pwm + +[1] https://lkml.org/lkml/2018/9/25/713 + +Signed-off-by: Fabrice Gasnier +Tested-by: Gottfried Haider +Tested-by: Michal Vokáč +Signed-off-by: Thierry Reding +--- + drivers/pwm/sysfs.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/drivers/pwm/sysfs.c ++++ b/drivers/pwm/sysfs.c +@@ -249,6 +249,7 @@ static void pwm_export_release(struct de + static int pwm_export_child(struct device *parent, struct pwm_device *pwm) + { + struct pwm_export *export; ++ char *pwm_prop[2]; + int ret; + + if (test_and_set_bit(PWMF_EXPORTED, &pwm->flags)) +@@ -276,6 +277,10 @@ static int pwm_export_child(struct devic + export = NULL; + return ret; + } ++ pwm_prop[0] = kasprintf(GFP_KERNEL, "EXPORT=pwm%u", pwm->hwpwm); ++ pwm_prop[1] = NULL; ++ kobject_uevent_env(&parent->kobj, KOBJ_CHANGE, pwm_prop); ++ kfree(pwm_prop[0]); + + return 0; + } +@@ -288,6 +293,7 @@ static int pwm_unexport_match(struct dev + static int pwm_unexport_child(struct device *parent, struct pwm_device *pwm) + { + struct device *child; ++ char *pwm_prop[2]; + + if (!test_and_clear_bit(PWMF_EXPORTED, &pwm->flags)) + return -ENODEV; +@@ -296,6 +302,11 @@ static int pwm_unexport_child(struct dev + if (!child) + return -ENODEV; + ++ pwm_prop[0] = kasprintf(GFP_KERNEL, "UNEXPORT=pwm%u", pwm->hwpwm); ++ pwm_prop[1] = NULL; ++ kobject_uevent_env(&parent->kobj, KOBJ_CHANGE, pwm_prop); ++ kfree(pwm_prop[0]); ++ + /* for device_find_child() */ + put_device(child); + device_unregister(child); diff --git a/target/linux/brcm2708/patches-4.19/950-0280-overlays-Add-ssd1306-overlay-for-OLED-display.patch b/target/linux/brcm2708/patches-4.19/950-0280-overlays-Add-ssd1306-overlay-for-OLED-display.patch new file mode 100644 index 0000000000..967cc76442 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0280-overlays-Add-ssd1306-overlay-for-OLED-display.patch @@ -0,0 +1,104 @@ +From d8eac0d3e4f6c6f9e5f789c8e2288699b2afebcb Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 21 Jan 2019 21:17:27 +0000 +Subject: [PATCH] overlays: Add ssd1306 overlay for OLED display + +See: https://github.com/raspberrypi/firmware/issues/1098 + +Signed-off-by: mincepi +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 31 ++++++++++++++++ + .../arm/boot/dts/overlays/ssd1306-overlay.dts | 36 +++++++++++++++++++ + 3 files changed, 68 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/ssd1306-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -135,6 +135,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + spi2-1cs.dtbo \ + spi2-2cs.dtbo \ + spi2-3cs.dtbo \ ++ ssd1306.dtbo \ + superaudioboard.dtbo \ + sx150x.dtbo \ + tc358743.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1950,6 +1950,37 @@ Params: cs0_pin GPIO pin + is 'okay' or enabled). + + ++Name: ssd1306 ++Info: Overlay for activation of SSD1306 over I2C OLED display framebuffer. ++Load: dtoverlay=ssd1306,= ++Params: address Location in display memory of first character. ++ (default=0) ++ width Width of display. (default=128) ++ height Height of display. (default=64) ++ offset virtual channel a. (default=0) ++ normal Has no effect on displays tested. (default=not ++ set) ++ sequential Set this if every other scan line is missing. ++ (default=not set) ++ remapped Set this if display is garbled. (default=not ++ set) ++ inverted Set this if display is inverted and mirrored. ++ (default=not set) ++ ++ Examples: ++ Typical usage for 128x64 display: dtoverlay=ssd1306,inverted ++ ++ Typical usage for 128x32 display: dtoverlay=ssd1306,inverted,sequential ++ ++ i2c_baudrate=400000 will speed up the display. ++ ++ i2c_baudrate=1000000 seems to work even though it's not officially ++ supported by the hardware, and is faster still. ++ ++ For more information refer to the device datasheet at: ++ https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf ++ ++ + Name: superaudioboard + Info: Configures the SuperAudioBoard sound card + Load: dtoverlay=superaudioboard,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ssd1306-overlay.dts +@@ -0,0 +1,36 @@ ++// Overlay for SSD1306 128x64 and 128x32 OLED displays ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2718"; ++ ++ fragment@0 { ++ target = <&i2c1>; ++ __overlay__ { ++ status = "okay"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ssd1306: oled@3c{ ++ compatible = "solomon,ssd1306fb-i2c"; ++ reg = <0x3c>; ++ solomon,width = <128>; ++ solomon,height = <64>; ++ solomon,page-offset = <0>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ address = <&ssd1306>,"reg:0"; ++ width = <&ssd1306>,"solomon,width:0"; ++ height = <&ssd1306>,"solomon,height:0"; ++ offset = <&ssd1306>,"solomon,page-offset:0"; ++ normal = <&ssd1306>,"solomon,segment-no-remap?"; ++ sequential = <&ssd1306>,"solomon,com-seq?"; ++ remapped = <&ssd1306>,"solomon,com-lrremap?"; ++ inverted = <&ssd1306>,"solomon,com-invdir?"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0281-overlays-mcp23017-Support-the-MCP23008.patch b/target/linux/brcm2708/patches-4.19/950-0281-overlays-mcp23017-Support-the-MCP23008.patch new file mode 100644 index 0000000000..44f295a89e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0281-overlays-mcp23017-Support-the-MCP23008.patch @@ -0,0 +1,49 @@ +From c85a1ccbc6b1cab51a5fe5b916bcaf40bcd9096c Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 21 Jan 2019 12:19:57 +0000 +Subject: [PATCH] overlays: mcp23017: Support the MCP23008 + +Add an 'mcp23008' parameter to enable support for the MCP23008 device. + +See: https://github.com/raspberrypi/linux/issues/2818 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 2 ++ + arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 10 +++++++++- + 2 files changed, 11 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1212,6 +1212,8 @@ Params: gpiopin Gpio pin + + addr I2C address of the MCP23017 (default: 0x20) + ++ mcp23008 Configure an MCP23008 instead. ++ + + Name: mcp23s17 + Info: Configures the MCP23S08/17 SPI GPIO expanders. +--- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts +@@ -44,11 +44,19 @@ + }; + }; + }; +- ++ ++ fragment@3 { ++ target = <&mcp23017>; ++ __dormant__ { ++ compatible = "microchip,mcp23008"; ++ }; ++ }; ++ + __overrides__ { + gpiopin = <&mcp23017_pins>,"brcm,pins:0", + <&mcp23017>,"interrupts:0"; + addr = <&mcp23017>,"reg:0"; ++ mcp23008 = <0>,"=3"; + }; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0281-staging-bcm2835-camera-Fix-stride-on-RGB3-BGR3-forma.patch b/target/linux/brcm2708/patches-4.19/950-0281-staging-bcm2835-camera-Fix-stride-on-RGB3-BGR3-forma.patch deleted file mode 100644 index c4ef974a8c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0281-staging-bcm2835-camera-Fix-stride-on-RGB3-BGR3-forma.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 69e42b6209062b9cd3fc9aea8fb53ed703509e51 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 30 Nov 2018 16:00:54 +0000 -Subject: [PATCH 281/806] staging: bcm2835-camera: Fix stride on RGB3/BGR3 - formats - -RGB3/BGR3 end up being 3 bytes per pixel, which meant that -the alignment code ended up trying to align using bitmasking -with a mask of 96. -That doesn't work, so switch to an arithmetic alignment for -those formats. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/bcm2835-camera.c | 26 ++++++++++++++----- - 1 file changed, 20 insertions(+), 6 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -1008,13 +1008,27 @@ static int vidioc_try_fmt_vid_cap(struct - 1, 0); - f->fmt.pix.bytesperline = f->fmt.pix.width * mfmt->ybbp; - if (!mfmt->remove_padding) { -- int align_mask = ((32 * mfmt->depth) >> 3) - 1; -- /* GPU isn't removing padding, so stride is aligned to 32 */ -- f->fmt.pix.bytesperline = -- (f->fmt.pix.bytesperline + align_mask) & ~align_mask; -+ if (mfmt->depth == 24) { -+ /* -+ * 24bpp is a pain as we can't use simple masking. -+ * Min stride is width aligned to 16, times 24bpp. -+ */ -+ f->fmt.pix.bytesperline = -+ ((f->fmt.pix.width + 15) & ~15) * 3; -+ } else { -+ /* -+ * GPU isn't removing padding, so stride is aligned to -+ * 32 -+ */ -+ int align_mask = ((32 * mfmt->depth) >> 3) - 1; -+ -+ f->fmt.pix.bytesperline = -+ (f->fmt.pix.bytesperline + align_mask) & -+ ~align_mask; -+ } - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -- "Not removing padding, so bytes/line = %d, (align_mask %d)\n", -- f->fmt.pix.bytesperline, align_mask); -+ "Not removing padding, so bytes/line = %d\n", -+ f->fmt.pix.bytesperline); - } - - /* Image buffer has to be padded to allow for alignment, even though diff --git a/target/linux/brcm2708/patches-4.19/950-0282-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch b/target/linux/brcm2708/patches-4.19/950-0282-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch deleted file mode 100644 index b8bb7e23c0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0282-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch +++ /dev/null @@ -1,76 +0,0 @@ -From cf6f8129b6af78116e00b1d781e0bcc8c4b73890 Mon Sep 17 00:00:00 2001 -From: John Sheu -Date: Thu, 15 Oct 2015 18:05:25 +0900 -Subject: [PATCH 282/806] media: vb2: Allow reqbufs(0) with "in use" MMAP - buffers - -Videobuf2 presently does not allow VIDIOC_REQBUFS to destroy outstanding -buffers if the queue is of type V4L2_MEMORY_MMAP, and if the buffers are -considered "in use". This is different behavior than for other memory -types and prevents us from deallocating buffers in following two cases: - -1) There are outstanding mmap()ed views on the buffer. However even if - we put the buffer in reqbufs(0), there will be remaining references, - due to vma .open/close() adjusting vb2 buffer refcount appropriately. - This means that the buffer will be in fact freed only when the last - mmap()ed view is unmapped. - -2) Buffer has been exported as a DMABUF. Refcount of the vb2 buffer - is managed properly by VB2 DMABUF ops, i.e. incremented on DMABUF - get and decremented on DMABUF release. This means that the buffer - will be alive until all importers release it. - -Considering both cases above, there does not seem to be any need to -prevent reqbufs(0) operation, because buffer lifetime is already -properly managed by both mmap() and DMABUF code paths. Let's remove it -and allow userspace freeing the queue (and potentially allocating a new -one) even though old buffers might be still in processing. - -Signed-off-by: John Sheu -Reviewed-by: Pawel Osciak -Reviewed-by: Tomasz Figa -Signed-off-by: Tomasz Figa ---- - .../media/common/videobuf2/videobuf2-core.c | 23 ------------------- - 1 file changed, 23 deletions(-) - ---- a/drivers/media/common/videobuf2/videobuf2-core.c -+++ b/drivers/media/common/videobuf2/videobuf2-core.c -@@ -554,20 +554,6 @@ bool vb2_buffer_in_use(struct vb2_queue - } - EXPORT_SYMBOL(vb2_buffer_in_use); - --/* -- * __buffers_in_use() - return true if any buffers on the queue are in use and -- * the queue cannot be freed (by the means of REQBUFS(0)) call -- */ --static bool __buffers_in_use(struct vb2_queue *q) --{ -- unsigned int buffer; -- for (buffer = 0; buffer < q->num_buffers; ++buffer) { -- if (vb2_buffer_in_use(q, q->bufs[buffer])) -- return true; -- } -- return false; --} -- - void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb) - { - call_void_bufop(q, fill_user_buffer, q->bufs[index], pb); -@@ -679,16 +665,7 @@ int vb2_core_reqbufs(struct vb2_queue *q - - if (*count == 0 || q->num_buffers != 0 || - (q->memory != VB2_MEMORY_UNKNOWN && q->memory != memory)) { -- /* -- * We already have buffers allocated, so first check if they -- * are not in use and can be freed. -- */ - mutex_lock(&q->mmap_lock); -- if (q->memory == VB2_MEMORY_MMAP && __buffers_in_use(q)) { -- mutex_unlock(&q->mmap_lock); -- dprintk(1, "memory in use, cannot free\n"); -- return -EBUSY; -- } - - /* - * Call queue_cancel to clean up any buffers in the PREPARED or diff --git a/target/linux/brcm2708/patches-4.19/950-0282-overlays-Add-mcp342x-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0282-overlays-Add-mcp342x-overlay.patch new file mode 100644 index 0000000000..d104c65cc3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0282-overlays-Add-mcp342x-overlay.patch @@ -0,0 +1,148 @@ +From b71f1fd962c66ba3fa46483f193cc2263146c5bf Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 21 Jan 2019 12:23:55 +0000 +Subject: [PATCH] overlays: Add mcp342x overlay + +Support the MCP342x family of ADCs from Microchip. + +See: https://github.com/raspberrypi/linux/issues/2819 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 16 ++++ + .../arm/boot/dts/overlays/mcp342x-overlay.dts | 93 +++++++++++++++++++ + 3 files changed, 110 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/mcp342x-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -79,6 +79,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + mcp2515-can1.dtbo \ + mcp3008.dtbo \ + mcp3202.dtbo \ ++ mcp342x.dtbo \ + media-center.dtbo \ + midi-uart0.dtbo \ + midi-uart1.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1277,6 +1277,22 @@ Params: spi--present boolean, + spi--speed integer, set the spi bus speed for this device + + ++Name: mcp342x ++Info: Overlay for activation of Microchip MCP3421-3428 ADCs over I2C ++Load: dtoverlay=mcp342x,= ++Params: addr I2C bus address of device, for devices with ++ addresses that are configurable, e.g. by ++ hardware links (default=0x68) ++ mcp3421 The device is an MCP3421 ++ mcp3422 The device is an MCP3422 ++ mcp3423 The device is an MCP3423 ++ mcp3424 The device is an MCP3424 ++ mcp3425 The device is an MCP3425 ++ mcp3426 The device is an MCP3426 ++ mcp3427 The device is an MCP3427 ++ mcp3428 The device is an MCP3428 ++ ++ + Name: media-center + Info: Media Center HAT - 2.83" Touch Display + extras by Pi Supply + Load: dtoverlay=media-center,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp342x-overlay.dts +@@ -0,0 +1,93 @@ ++// Overlay for MCP3421-8 ADCs from Microchip Semiconductor ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ mcp342x: mcp@68 { ++ reg = <0x68>; ++ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&mcp342x>; ++ __dormant__ { ++ compatible = "microchip,mcp3421"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&mcp342x>; ++ __dormant__ { ++ compatible = "microchip,mcp3422"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&mcp342x>; ++ __dormant__ { ++ compatible = "microchip,mcp3423"; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&mcp342x>; ++ __dormant__ { ++ compatible = "microchip,mcp3424"; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&mcp342x>; ++ __dormant__ { ++ compatible = "microchip,mcp3425"; ++ }; ++ }; ++ ++ fragment@6 { ++ target = <&mcp342x>; ++ __dormant__ { ++ compatible = "microchip,mcp3426"; ++ }; ++ }; ++ ++ fragment@7 { ++ target = <&mcp342x>; ++ __dormant__ { ++ compatible = "microchip,mcp3427"; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&mcp342x>; ++ __dormant__ { ++ compatible = "microchip,mcp3428"; ++ }; ++ }; ++ ++ __overrides__ { ++ addr = <&mcp342x>,"reg:0"; ++ mcp3421 = <0>,"=1"; ++ mcp3422 = <0>,"=2"; ++ mcp3423 = <0>,"=3"; ++ mcp3424 = <0>,"=4"; ++ mcp3425 = <0>,"=5"; ++ mcp3426 = <0>,"=6"; ++ mcp3427 = <0>,"=7"; ++ mcp3428 = <0>,"=8"; ++ }; ++}; ++ diff --git a/target/linux/brcm2708/patches-4.19/950-0283-char-vcio-Add-compat-ioctl-handling.patch b/target/linux/brcm2708/patches-4.19/950-0283-char-vcio-Add-compat-ioctl-handling.patch new file mode 100644 index 0000000000..a9b55722e5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0283-char-vcio-Add-compat-ioctl-handling.patch @@ -0,0 +1,58 @@ +From 70194b474d22974cd46356e5b3d3b0582abd02da Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 24 Jan 2019 13:56:30 +0000 +Subject: [PATCH] char: vcio: Add compat ioctl handling + +There was no compat ioctl handler, so 32 bit userspace on a +64 bit kernel failed as IOCTL_MBOX_PROPERTY used the size +of char*. + +Signed-off-by: Dave Stevenson +--- + drivers/char/broadcom/vcio.c | 22 +++++++++++++++++++++- + 1 file changed, 21 insertions(+), 1 deletion(-) + +--- a/drivers/char/broadcom/vcio.c ++++ b/drivers/char/broadcom/vcio.c +@@ -24,6 +24,9 @@ + + #define VCIO_IOC_MAGIC 100 + #define IOCTL_MBOX_PROPERTY _IOWR(VCIO_IOC_MAGIC, 0, char *) ++#ifdef CONFIG_COMPAT ++#define IOCTL_MBOX_PROPERTY32 _IOWR(VCIO_IOC_MAGIC, 0, compat_uptr_t) ++#endif + + static struct { + dev_t devt; +@@ -87,13 +90,30 @@ static long vcio_device_ioctl(struct fil + case IOCTL_MBOX_PROPERTY: + return vcio_user_property_list((void *)ioctl_param); + default: +- pr_err("unknown ioctl: %d\n", ioctl_num); ++ pr_err("unknown ioctl: %x\n", ioctl_num); + return -EINVAL; + } + } + ++#ifdef CONFIG_COMPAT ++static long vcio_device_compat_ioctl(struct file *file, unsigned int ioctl_num, ++ unsigned long ioctl_param) ++{ ++ switch (ioctl_num) { ++ case IOCTL_MBOX_PROPERTY32: ++ return vcio_user_property_list(compat_ptr(ioctl_param)); ++ default: ++ pr_err("unknown ioctl: %x\n", ioctl_num); ++ return -EINVAL; ++ } ++} ++#endif ++ + const struct file_operations vcio_fops = { + .unlocked_ioctl = vcio_device_ioctl, ++#ifdef CONFIG_COMPAT ++ .compat_ioctl = vcio_device_compat_ioctl, ++#endif + .open = vcio_device_open, + .release = vcio_device_release, + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0283-tpm-Make-SECURITYFS-a-weak-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0283-tpm-Make-SECURITYFS-a-weak-dependency.patch deleted file mode 100644 index 03dca98835..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0283-tpm-Make-SECURITYFS-a-weak-dependency.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 38e82adecd1b7ae790a827c29e954d35a2bbee98 Mon Sep 17 00:00:00 2001 -From: Peter Huewe -Date: Mon, 3 Sep 2018 21:51:51 +0200 -Subject: [PATCH 283/806] tpm: Make SECURITYFS a weak dependency - -commit 2f7d8dbb11287cbe9da6380ca14ed5d38c9ed91f upstream. - -While having SECURITYFS enabled for the tpm subsystem is beneficial in -most cases, it is not strictly necessary to have it enabled at all. -Especially on platforms without any boot firmware integration of the TPM -(e.g. raspberry pi) it does not add any value for the tpm subsystem, -as there is no eventlog present. - -By turning it from 'select' to 'imply' it still gets selected per -default, but enables users who want to save some kb of ram by turning -SECURITYFS off. - -Signed-off-by: Peter Huewe -Reviewed-by: Jarkko Sakkinen -Signed-off-by: Jarkko Sakkinen ---- - drivers/char/tpm/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/char/tpm/Kconfig -+++ b/drivers/char/tpm/Kconfig -@@ -5,7 +5,7 @@ - menuconfig TCG_TPM - tristate "TPM Hardware Support" - depends on HAS_IOMEM -- select SECURITYFS -+ imply SECURITYFS - select CRYPTO - select CRYPTO_HASH_INFO - ---help--- diff --git a/target/linux/brcm2708/patches-4.19/950-0284-char-vcio-Fail-probe-if-rpi_firmware-is-not-found.patch b/target/linux/brcm2708/patches-4.19/950-0284-char-vcio-Fail-probe-if-rpi_firmware-is-not-found.patch new file mode 100644 index 0000000000..0ec06ca246 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0284-char-vcio-Fail-probe-if-rpi_firmware-is-not-found.patch @@ -0,0 +1,28 @@ +From 6880e5c73b75be683299debf391eba4f521cc20f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 24 Jan 2019 14:03:28 +0000 +Subject: [PATCH] char: vcio: Fail probe if rpi_firmware is not found. + +Device Tree is now the only supported config mechanism, therefore +uncomment the block of code that fails the probe if the +firmware node can't be found. + +Signed-off-by: Dave Stevenson +--- + drivers/char/broadcom/vcio.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/char/broadcom/vcio.c ++++ b/drivers/char/broadcom/vcio.c +@@ -126,10 +126,9 @@ static int __init vcio_init(void) + + np = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); +-/* Uncomment this when we only boot with Device Tree + if (!of_device_is_available(np)) + return -ENODEV; +-*/ ++ + vcio.fw = rpi_firmware_get(np); + if (!vcio.fw) + return -ENODEV; diff --git a/target/linux/brcm2708/patches-4.19/950-0285-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch b/target/linux/brcm2708/patches-4.19/950-0285-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch deleted file mode 100644 index 5867455529..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0285-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch +++ /dev/null @@ -1,92 +0,0 @@ -From 82298c670f768f392f48526fe7c8a93682e83998 Mon Sep 17 00:00:00 2001 -From: Peter Huewe -Date: Thu, 14 Jun 2018 22:51:24 +0200 -Subject: [PATCH 285/806] Add overlay for SLB9760 Iridium /LetsTrust TPM - -Device Tree overlay for the Infineon SLB9670 Trusted Platform Module add-on -boards, which can be used as a secure key storage and hwrng. -available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by -pi3g. - -Signed-off-by: Peter Huewe ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 8 ++++ - .../boot/dts/overlays/tpm-slb9670-overlay.dts | 44 +++++++++++++++++++ - 3 files changed, 53 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -137,6 +137,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - tc358743.dtbo \ - tc358743-audio.dtbo \ - tinylcd35.dtbo \ -+ tpm-slb9670.dtbo \ - uart0.dtbo \ - uart1.dtbo \ - upstream.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -2012,6 +2012,14 @@ Params: speed Display - dtoverlay=tinylcd35,touch,touchgpio=3 - - -+Name: tpm-slb9670 -+Info: Enables support for Infineon SLB9670 Trusted Platform Module add-on -+ boards, which can be used as a secure key storage and hwrng, -+ available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. -+Load: dtoverlay=tpm-slb9670 -+Params: -+ -+ - Name: uart0 - Info: Change the pin usage of uart0 - Load: dtoverlay=uart0,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts -@@ -0,0 +1,44 @@ -+/* -+ * Device Tree overlay for the Infineon SLB9670 Trusted Platform Module add-on -+ * boards, which can be used as a secure key storage and hwrng. -+ * available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ slb9670: slb9670@1 { -+ compatible = "infineon,slb9670"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <32000000>; -+ status = "okay"; -+ }; -+ -+ }; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0285-staging-mmal-vchiq-Fix-client_component-for-64-bit-k.patch b/target/linux/brcm2708/patches-4.19/950-0285-staging-mmal-vchiq-Fix-client_component-for-64-bit-k.patch new file mode 100644 index 0000000000..2e20c64b8b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0285-staging-mmal-vchiq-Fix-client_component-for-64-bit-k.patch @@ -0,0 +1,68 @@ +From 18511b66fee5967ed5631e7cbe2c263f07e956f9 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 22 Jan 2019 12:04:09 +0000 +Subject: [PATCH] staging: mmal-vchiq: Fix client_component for 64 bit + kernel + +The MMAL client_component field is used with the event +mechanism to allow the client to identify the component for +which the event is generated. +The field is only 32bits in size, therefore we can't use a +pointer to the component in a 64 bit kernel. + +Component handles are already held in an array per VCHI +instance, so use the array index as the client_component handle +to avoid having to create a new IDR for this purpose. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 12 +++++++++--- + .../staging/vc04_services/vchiq-mmal/mmal-vchiq.h | 1 + + 2 files changed, 10 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -473,9 +473,9 @@ buffer_from_host(struct vchiq_mmal_insta + static void event_to_host_cb(struct vchiq_mmal_instance *instance, + struct mmal_msg *msg, u32 msg_len) + { +- /* FIXME: Not going to work on 64 bit */ ++ int comp_idx = msg->u.event_to_host.client_component; + struct vchiq_mmal_component *component = +- (struct vchiq_mmal_component *)msg->u.event_to_host.client_component; ++ &instance->component[comp_idx]; + struct vchiq_mmal_port *port = NULL; + struct mmal_msg_context *msg_context; + u32 port_num = msg->u.event_to_host.port_num; +@@ -1074,7 +1074,7 @@ static int create_component(struct vchiq + + /* build component create message */ + m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE; +- m.u.component_create.client_component = (u32)(unsigned long)component; ++ m.u.component_create.client_component = component->client_component; + strncpy(m.u.component_create.name, name, + sizeof(m.u.component_create.name)); + +@@ -1869,6 +1869,12 @@ int vchiq_mmal_component_init(struct vch + goto unlock; + } + ++ /* We need a handle to reference back to our component structure. ++ * Use the array index in instance->component rather than rolling ++ * another IDR. ++ */ ++ component->client_component = idx; ++ + ret = create_component(instance, component, name); + if (ret < 0) { + pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h +@@ -97,6 +97,7 @@ struct vchiq_mmal_component { + struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */ + struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */ + struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */ ++ u32 client_component; /* Used to ref back to client struct */ + }; + + int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance); diff --git a/target/linux/brcm2708/patches-4.19/950-0286-Revert-staging-vchiq_arm-Register-a-platform-device-.patch b/target/linux/brcm2708/patches-4.19/950-0286-Revert-staging-vchiq_arm-Register-a-platform-device-.patch deleted file mode 100644 index fe7f0d98b8..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0286-Revert-staging-vchiq_arm-Register-a-platform-device-.patch +++ /dev/null @@ -1,48 +0,0 @@ -From d679d6ff3fd138f55b8bbeaf7750c3c980944295 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 4 Dec 2018 19:40:12 +0000 -Subject: [PATCH 286/806] Revert "staging: vchiq_arm: Register a platform - device for the audio driver" - -This reverts commit ab59590ed562b89db51fe46cee5db96b9bc5abd8. - -Issues have been observed in LibreElec as this was unconditionally -loading the audio driver instead of having the DT parameter to -enable it. - -Includes a partial revert of 2147700eb7a1b9e55e0684f0749114ce35d61571 -which fixed up the error handling. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 5 ----- - 1 file changed, 5 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -170,7 +170,6 @@ static struct class *vchiq_class; - static struct device *vchiq_dev; - static DEFINE_SPINLOCK(msg_queue_spinlock); - static struct platform_device *bcm2835_camera; --static struct platform_device *bcm2835_audio; - static struct platform_device *bcm2835_codec; - static struct platform_device *vcsm_cma; - -@@ -3662,9 +3661,6 @@ static int vchiq_probe(struct platform_d - bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera"); - if (IS_ERR(bcm2835_camera)) - bcm2835_camera = NULL; -- bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio"); -- if (IS_ERR(bcm2835_audio)) -- bcm2835_audio = NULL; - bcm2835_codec = vchiq_register_child(pdev, "bcm2835-codec"); - if (IS_ERR(bcm2835_codec)) - bcm2835_codec = NULL; -@@ -3685,7 +3681,6 @@ failed_platform_init: - static int vchiq_remove(struct platform_device *pdev) - { - platform_device_unregister(bcm2835_codec); -- platform_device_unregister(bcm2835_audio); - platform_device_unregister(bcm2835_camera); - platform_device_unregister(vcsm_cma); - vchiq_debugfs_deinit(); diff --git a/target/linux/brcm2708/patches-4.19/950-0286-staging-bcm2835-camera-Add-sanity-checks-for-queue_s.patch b/target/linux/brcm2708/patches-4.19/950-0286-staging-bcm2835-camera-Add-sanity-checks-for-queue_s.patch new file mode 100644 index 0000000000..c4e78a1e21 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0286-staging-bcm2835-camera-Add-sanity-checks-for-queue_s.patch @@ -0,0 +1,44 @@ +From 6b3fde1207785584dbd1fdf65110cf60bd29b409 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 15 Jan 2019 15:35:24 +0000 +Subject: [PATCH] staging: bcm2835-camera: Add sanity checks for + queue_setup/CREATE_BUFS + +Fixes a v4l2-compliance failure when passed a buffer that is +too small. +queue_setup wasn't handling the case where !(*nplanes), as +used from CREATE_BUFS and requiring the driver to sanity +check the provided buffer parameters. It was assuming that +it was always being used in the REQBUFS case where it provides +the buffer properties. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-camera/bcm2835-camera.c | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -242,6 +242,22 @@ static int queue_setup(struct vb2_queue + return -EINVAL; + } + ++ /* Handle CREATE_BUFS situation - *nplanes != 0 */ ++ if (*nplanes) { ++ if (*nplanes != 1 || ++ sizes[0] < dev->capture.port->current_buffer.size) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: dev:%p Invalid buffer request from CREATE_BUFS, size %u < %u, nplanes %u != 1\n", ++ __func__, dev, sizes[0], ++ dev->capture.port->current_buffer.size, ++ *nplanes); ++ return -EINVAL; ++ } else { ++ return 0; ++ } ++ } ++ ++ /* Handle REQBUFS situation */ + size = dev->capture.port->current_buffer.size; + if (size == 0) { + v4l2_err(&dev->v4l2_dev, diff --git a/target/linux/brcm2708/patches-4.19/950-0287-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0287-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch deleted file mode 100644 index d7e7ac71d0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0287-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch +++ /dev/null @@ -1,114 +0,0 @@ -From 28e06d43dd44a45d307848bed588fc65d7c79d83 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 4 Dec 2018 20:41:19 +0000 -Subject: [PATCH 287/806] Revert "staging: bcm2835-audio: Drop DT dependency" - -This reverts commit 933bc853bb764e476b0b0f633588f46d20f1f76a. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-audio/bcm2835.c | 41 ++++++++++--------- - 1 file changed, 22 insertions(+), 19 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -4,17 +4,15 @@ - #include - - #include --#include --#include - #include - #include -+#include - - #include "bcm2835.h" - - static bool enable_hdmi; - static bool enable_headphones; - static bool enable_compat_alsa = true; --static int num_channels = MAX_SUBSTREAMS; - - module_param(enable_hdmi, bool, 0444); - MODULE_PARM_DESC(enable_hdmi, "Enables HDMI virtual audio device"); -@@ -23,8 +21,6 @@ MODULE_PARM_DESC(enable_headphones, "Ena - module_param(enable_compat_alsa, bool, 0444); - MODULE_PARM_DESC(enable_compat_alsa, - "Enables ALSA compatibility virtual audio device"); --module_param(num_channels, int, 0644); --MODULE_PARM_DESC(num_channels, "Number of audio channels (default: 8)"); - - static void snd_devm_unregister_child(struct device *dev, void *res) - { -@@ -411,30 +407,31 @@ static int snd_add_child_devices(struct - return 0; - } - --static int snd_bcm2835_alsa_probe(struct platform_device *pdev) -+static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -+ u32 numchans; - int err; - -- if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) { -- num_channels = MAX_SUBSTREAMS; -- dev_warn(dev, "Illegal num_channels value, will use %u\n", -- num_channels); -- } -- -- dev->coherent_dma_mask = DMA_BIT_MASK(32); -- dev->dma_mask = &dev->coherent_dma_mask; -- err = of_dma_configure(dev, NULL, true); -+ err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", -+ &numchans); - if (err) { -- dev_err(dev, "Unable to setup DMA: %d\n", err); -+ dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); - return err; - } - -+ if (numchans == 0 || numchans > MAX_SUBSTREAMS) { -+ numchans = MAX_SUBSTREAMS; -+ dev_warn(dev, -+ "Illegal 'brcm,pwm-channels' value, will use %u\n", -+ numchans); -+ } -+ - err = bcm2835_devm_add_vchi_ctx(dev); - if (err) - return err; - -- err = snd_add_child_devices(dev, num_channels); -+ err = snd_add_child_devices(dev, numchans); - if (err) - return err; - -@@ -456,14 +453,21 @@ static int snd_bcm2835_alsa_resume(struc - - #endif - -+static const struct of_device_id snd_bcm2835_of_match_table[] = { -+ { .compatible = "brcm,bcm2835-audio",}, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); -+ - static struct platform_driver bcm2835_alsa0_driver = { -- .probe = snd_bcm2835_alsa_probe, -+ .probe = snd_bcm2835_alsa_probe_dt, - #ifdef CONFIG_PM - .suspend = snd_bcm2835_alsa_suspend, - .resume = snd_bcm2835_alsa_resume, - #endif - .driver = { - .name = "bcm2835_audio", -+ .of_match_table = snd_bcm2835_of_match_table, - }, - }; - module_platform_driver(bcm2835_alsa0_driver); -@@ -471,4 +475,3 @@ module_platform_driver(bcm2835_alsa0_dri - MODULE_AUTHOR("Dom Cobley"); - MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); - MODULE_LICENSE("GPL"); --MODULE_ALIAS("platform:bcm2835_audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0287-staging-bcm2835-camera-Set-the-field-value-within-ea.patch b/target/linux/brcm2708/patches-4.19/950-0287-staging-bcm2835-camera-Set-the-field-value-within-ea.patch new file mode 100644 index 0000000000..e562e1cffe --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0287-staging-bcm2835-camera-Set-the-field-value-within-ea.patch @@ -0,0 +1,27 @@ +From 7f67e8ed8ae17ddca0748975de0c0efad6a5e6bb Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 15 Jan 2019 16:32:33 +0000 +Subject: [PATCH] staging: bcm2835-camera: Set the field value within + each buffer + +Fixes a v4l2-compliance failure +v4l2-test-buffers.cpp(415): g_field() == V4L2_FIELD_ANY + +The driver only ever produces progresive frames, so field should +always be set to V4L2_FIELD_NONE. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +@@ -443,6 +443,7 @@ static void buffer_cb(struct vchiq_mmal_ + } + dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; + buf->vb.sequence = dev->capture.sequence++; ++ buf->vb.field = V4L2_FIELD_NONE; + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, mmal_buf->length); + if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) diff --git a/target/linux/brcm2708/patches-4.19/950-0288-ASoC-add-driver-for-3Dlab-Nano-soundcard-2758.patch b/target/linux/brcm2708/patches-4.19/950-0288-ASoC-add-driver-for-3Dlab-Nano-soundcard-2758.patch deleted file mode 100644 index c54b5af7a1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0288-ASoC-add-driver-for-3Dlab-Nano-soundcard-2758.patch +++ /dev/null @@ -1,483 +0,0 @@ -From e740bd2cc3fcd632fcd6c8881b1fc671bcde5914 Mon Sep 17 00:00:00 2001 -From: dev-3Dlab <45081440+dev-3Dlab@users.noreply.github.com> -Date: Wed, 5 Dec 2018 10:59:11 +0100 -Subject: [PATCH 288/806] ASoC: add driver for 3Dlab Nano soundcard (#2758) - -Signed-off-by: GT ---- - .../overlays/3dlab-nano-player-overlay.dts | 32 ++ - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 + - sound/soc/bcm/3dlab-nano-player.c | 370 ++++++++++++++++++ - sound/soc/bcm/Kconfig | 6 + - sound/soc/bcm/Makefile | 2 + - 8 files changed, 419 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts - create mode 100644 sound/soc/bcm/3dlab-nano-player.c - ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts -@@ -0,0 +1,32 @@ -+// Definitions for 3Dlab Nano Player -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ nano-player@41 { -+ compatible = "3dlab,nano-player"; -+ reg = <0x41>; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; -+ -+// EOF ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -1,6 +1,7 @@ - # Overlays for the Raspberry Pi platform - - dtbo-$(CONFIG_ARCH_BCM2835) += \ -+ 3dlab-nano-player.dtbo \ - adau1977-adc.dtbo \ - adau7002-simple.dtbo \ - ads1015.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -199,6 +199,12 @@ Params: - and the other i2c baudrate parameters. - - -+Name: 3dlab-nano-player -+Info: Configures the 3Dlab Nano Player -+Load: dtoverlay=3dlab-nano-player -+Params: -+ -+ - Name: adau1977-adc - Info: Overlay for activation of ADAU1977 ADC codec over I2C for control - and I2S for data. ---- /dev/null -+++ b/sound/soc/bcm/3dlab-nano-player.c -@@ -0,0 +1,370 @@ -+/* -+ * 3Dlab Nano Player ALSA SoC Audio driver. -+ * -+ * Copyright (C) 2018 3Dlab. -+ * -+ * Author: GT -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define NANO_ID 0x00 -+#define NANO_VER 0x01 -+#define NANO_CFG 0x02 -+#define NANO_STATUS 0x03 -+#define NANO_SPI_ADDR 0x04 -+#define NANO_SPI_DATA 0x05 -+ -+#define NANO_ID_VAL 0x3D -+#define NANO_CFG_OFF 0x00 -+#define NANO_CFG_MULT1 0 -+#define NANO_CFG_MULT2 1 -+#define NANO_CFG_MULT4 2 -+#define NANO_CFG_MULT8 3 -+#define NANO_CFG_MULT16 4 -+#define NANO_CFG_CLK22 0 -+#define NANO_CFG_CLK24 BIT(3) -+#define NANO_CFG_DSD BIT(4) -+#define NANO_CFG_ENA BIT(5) -+#define NANO_CFG_BLINK BIT(6) -+#define NANO_STATUS_P1 BIT(0) -+#define NANO_STATUS_P2 BIT(1) -+#define NANO_STATUS_FLG BIT(2) -+#define NANO_STATUS_CLK BIT(3) -+#define NANO_SPI_READ 0 -+#define NANO_SPI_WRITE BIT(5) -+ -+#define NANO_DAC_CTRL1 0x00 -+#define NANO_DAC_CTRL2 0x01 -+#define NANO_DAC_CTRL3 0x02 -+#define NANO_DAC_LATT 0x03 -+#define NANO_DAC_RATT 0x04 -+ -+#define NANO_CTRL2_VAL 0x22 -+ -+static int nano_player_spi_write(struct regmap *map, -+ unsigned int reg, unsigned int val) -+{ -+ /* indirect register access */ -+ regmap_write(map, NANO_SPI_DATA, val); -+ regmap_write(map, NANO_SPI_ADDR, reg | NANO_SPI_WRITE); -+ return 0; -+} -+ -+static int nano_player_ctrl_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ /* describe control element */ -+ if (strstr(kcontrol->id.name, "Volume")) { -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; -+ uinfo->count = 1; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = 100; -+ } else { -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; -+ uinfo->count = 1; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = 1; -+ } -+ -+ return 0; -+} -+ -+static int nano_player_ctrl_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ /* program control value to hardware */ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct regmap *regmap = snd_soc_card_get_drvdata(card); -+ -+ if (strstr(kcontrol->id.name, "Volume")) { -+ unsigned int vol = ucontrol->value.integer.value[0]; -+ unsigned int att = 255 - (2 * (100 - vol)); -+ -+ nano_player_spi_write(regmap, NANO_DAC_LATT, att); -+ nano_player_spi_write(regmap, NANO_DAC_RATT, att); -+ kcontrol->private_value = vol; -+ } else { -+ unsigned int mute = ucontrol->value.integer.value[0]; -+ unsigned int reg = NANO_CTRL2_VAL | mute; -+ -+ nano_player_spi_write(regmap, NANO_DAC_CTRL2, reg); -+ kcontrol->private_value = mute; -+ } -+ return 0; -+} -+ -+static int nano_player_ctrl_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ /* return last programmed value */ -+ ucontrol->value.integer.value[0] = kcontrol->private_value; -+ return 0; -+} -+ -+#define SOC_NANO_PLAYER_CTRL(xname) \ -+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ -+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \ -+ .info = nano_player_ctrl_info, \ -+ .put = nano_player_ctrl_put, \ -+ .get = nano_player_ctrl_get } -+ -+static const struct snd_kcontrol_new nano_player_controls[] = { -+ SOC_NANO_PLAYER_CTRL("Master Playback Volume"), -+ SOC_NANO_PLAYER_CTRL("Master Playback Switch"), -+}; -+ -+static const unsigned int nano_player_rates[] = { -+ 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000, -+ 705600, 768000 /* only possible with fast clocks */ -+}; -+ -+static struct snd_pcm_hw_constraint_list nano_player_constraint_rates = { -+ .list = nano_player_rates, -+ .count = ARRAY_SIZE(nano_player_rates), -+}; -+ -+static int nano_player_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_card *card = rtd->card; -+ struct regmap *regmap = snd_soc_card_get_drvdata(card); -+ struct snd_soc_pcm_stream *cpu = &rtd->cpu_dai->driver->playback; -+ struct snd_soc_pcm_stream *codec = &rtd->codec_dai->driver->playback; -+ unsigned int sample_bits = 32; -+ unsigned int val; -+ -+ /* configure cpu dai */ -+ cpu->formats |= SNDRV_PCM_FMTBIT_DSD_U32_LE; -+ cpu->rate_max = 768000; -+ -+ /* configure dummy codec dai */ -+ codec->rate_min = 44100; -+ codec->rates = SNDRV_PCM_RATE_KNOT; -+ codec->formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_DSD_U32_LE; -+ -+ /* configure max supported rate */ -+ regmap_read(regmap, NANO_STATUS, &val); -+ if (val & NANO_STATUS_CLK) { -+ dev_notice(card->dev, "Board with fast clocks installed\n"); -+ codec->rate_max = 768000; -+ } else { -+ dev_notice(card->dev, "Board with normal clocks installed\n"); -+ codec->rate_max = 384000; -+ } -+ -+ /* frame length enforced by hardware */ -+ return snd_soc_dai_set_bclk_ratio(rtd->cpu_dai, sample_bits * 2); -+} -+ -+static int nano_player_startup(struct snd_pcm_substream *substream) -+{ -+ return snd_pcm_hw_constraint_list(substream->runtime, 0, -+ SNDRV_PCM_HW_PARAM_RATE, -+ &nano_player_constraint_rates); -+} -+ -+static int nano_player_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_card *card = rtd->card; -+ struct regmap *regmap = snd_soc_card_get_drvdata(card); -+ unsigned int config = NANO_CFG_ENA; -+ struct snd_mask *fmt; -+ -+ /* configure PCM or DSD */ -+ fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); -+ if (snd_mask_test(fmt, SNDRV_PCM_FORMAT_DSD_U32_LE)) { -+ /* embed DSD in PCM data */ -+ snd_mask_none(fmt); -+ snd_mask_set(fmt, SNDRV_PCM_FORMAT_S32_LE); -+ /* enable DSD mode */ -+ config |= NANO_CFG_DSD; -+ } -+ -+ /* configure clocks */ -+ switch (params_rate(params)) { -+ case 44100: -+ config |= NANO_CFG_MULT1 | NANO_CFG_CLK22; -+ break; -+ case 88200: -+ config |= NANO_CFG_MULT2 | NANO_CFG_CLK22; -+ break; -+ case 176400: -+ config |= NANO_CFG_MULT4 | NANO_CFG_CLK22; -+ break; -+ case 352800: -+ config |= NANO_CFG_MULT8 | NANO_CFG_CLK22; -+ break; -+ case 705600: -+ config |= NANO_CFG_MULT16 | NANO_CFG_CLK22; -+ break; -+ case 48000: -+ config |= NANO_CFG_MULT1 | NANO_CFG_CLK24; -+ break; -+ case 96000: -+ config |= NANO_CFG_MULT2 | NANO_CFG_CLK24; -+ break; -+ case 192000: -+ config |= NANO_CFG_MULT4 | NANO_CFG_CLK24; -+ break; -+ case 384000: -+ config |= NANO_CFG_MULT8 | NANO_CFG_CLK24; -+ break; -+ case 768000: -+ config |= NANO_CFG_MULT16 | NANO_CFG_CLK24; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ dev_dbg(card->dev, "Send CFG register 0x%02X\n", config); -+ return regmap_write(regmap, NANO_CFG, config); -+} -+ -+static struct snd_soc_ops nano_player_ops = { -+ .startup = nano_player_startup, -+ .hw_params = nano_player_hw_params, -+}; -+ -+static struct snd_soc_dai_link nano_player_link = { -+ .name = "3Dlab Nano Player", -+ .stream_name = "3Dlab Nano Player HiFi", -+ .platform_name = "bcm2708-i2s.0", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_name = "snd-soc-dummy", -+ .codec_dai_name = "snd-soc-dummy-dai", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | -+ SND_SOC_DAIFMT_CONT | -+ SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ .init = nano_player_init, -+ .ops = &nano_player_ops, -+}; -+ -+static const struct regmap_config nano_player_regmap = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .max_register = 128, -+ .cache_type = REGCACHE_RBTREE, -+}; -+ -+static int nano_player_card_probe(struct snd_soc_card *card) -+{ -+ struct regmap *regmap = snd_soc_card_get_drvdata(card); -+ unsigned int val; -+ -+ /* check hardware integrity */ -+ regmap_read(regmap, NANO_ID, &val); -+ if (val != NANO_ID_VAL) { -+ dev_err(card->dev, "Invalid ID register 0x%02X\n", val); -+ return -ENODEV; -+ } -+ -+ /* report version to the user */ -+ regmap_read(regmap, NANO_VER, &val); -+ dev_notice(card->dev, "Started 3Dlab Nano Player driver (v%d)\n", val); -+ -+ /* enable internal audio bus and blink status LED */ -+ return regmap_write(regmap, NANO_CFG, NANO_CFG_ENA | NANO_CFG_BLINK); -+} -+ -+static int nano_player_card_remove(struct snd_soc_card *card) -+{ -+ /* disable internal audio bus */ -+ struct regmap *regmap = snd_soc_card_get_drvdata(card); -+ -+ return regmap_write(regmap, NANO_CFG, NANO_CFG_OFF); -+} -+ -+static struct snd_soc_card nano_player_card = { -+ .name = "3Dlab_Nano_Player", -+ .owner = THIS_MODULE, -+ .dai_link = &nano_player_link, -+ .num_links = 1, -+ .controls = nano_player_controls, -+ .num_controls = ARRAY_SIZE(nano_player_controls), -+ .probe = nano_player_card_probe, -+ .remove = nano_player_card_remove, -+}; -+ -+static int nano_player_i2c_probe(struct i2c_client *i2c, -+ const struct i2c_device_id *id) -+{ -+ struct regmap *regmap; -+ int ret; -+ -+ regmap = devm_regmap_init_i2c(i2c, &nano_player_regmap); -+ if (IS_ERR(regmap)) { -+ ret = PTR_ERR(regmap); -+ dev_err(&i2c->dev, "Failed to init regmap %d\n", ret); -+ return ret; -+ } -+ -+ if (i2c->dev.of_node) { -+ struct snd_soc_dai_link *dai = &nano_player_link; -+ struct device_node *node; -+ -+ /* cpu handle configured by device tree */ -+ node = of_parse_phandle(i2c->dev.of_node, "i2s-controller", 0); -+ if (node) { -+ dai->platform_name = NULL; -+ dai->platform_of_node = node; -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = node; -+ } -+ } -+ -+ nano_player_card.dev = &i2c->dev; -+ snd_soc_card_set_drvdata(&nano_player_card, regmap); -+ ret = devm_snd_soc_register_card(&i2c->dev, &nano_player_card); -+ -+ if (ret && ret != -EPROBE_DEFER) -+ dev_err(&i2c->dev, "Failed to register card %d\n", ret); -+ -+ return ret; -+} -+ -+static const struct of_device_id nano_player_of_match[] = { -+ { .compatible = "3dlab,nano-player", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, nano_player_of_match); -+ -+static const struct i2c_device_id nano_player_i2c_id[] = { -+ { "nano-player", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(i2c, nano_player_i2c_id); -+ -+static struct i2c_driver nano_player_i2c_driver = { -+ .probe = nano_player_i2c_probe, -+ .id_table = nano_player_i2c_id, -+ .driver = { -+ .name = "nano-player", -+ .owner = THIS_MODULE, -+ .of_match_table = nano_player_of_match, -+ }, -+}; -+ -+module_i2c_driver(nano_player_i2c_driver); -+ -+MODULE_DESCRIPTION("ASoC 3Dlab Nano Player driver"); -+MODULE_AUTHOR("GT "); -+MODULE_LICENSE("GPL v2"); -+ -+/* EOF */ ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -17,6 +17,12 @@ config SND_SOC_CYGNUS - - If you don't know what to do here, say N. - -+config SND_BCM2708_SOC_3DLAB_NANO_PLAYER -+ tristate "Support for 3Dlab Nano Player" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ help -+ Say Y or M if you want to add support for 3Dlab Nano Player. -+ - config SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD - tristate "Support for Google voiceHAT soundcard" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- - snd-soc-googlevoicehat-codec-objs := googlevoicehat-codec.o - - # BCM2708 Machine Support -+snd-soc-3dlab-nano-player-objs := 3dlab-nano-player.o - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o - snd-soc-justboom-dac-objs := justboom-dac.o - snd-soc-rpi-cirrus-objs := rpi-cirrus.o -@@ -31,6 +32,7 @@ snd-soc-fe-pi-audio-objs := fe-pi-audio. - snd-soc-rpi-simple-soundcard-objs := rpi-simple-soundcard.o - snd-soc-rpi-wm8804-soundcard-objs := rpi-wm8804-soundcard.o - -+obj-$(CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER) += snd-soc-3dlab-nano-player.o - obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o - obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o diff --git a/target/linux/brcm2708/patches-4.19/950-0288-char-vc_mem-Fix-up-compat-ioctls-for-64bit-kernel.patch b/target/linux/brcm2708/patches-4.19/950-0288-char-vc_mem-Fix-up-compat-ioctls-for-64bit-kernel.patch new file mode 100644 index 0000000000..b0beb6d5c8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0288-char-vc_mem-Fix-up-compat-ioctls-for-64bit-kernel.patch @@ -0,0 +1,111 @@ +From 966ff2b4c758eb8c8c04f26422cd183e6aa8eda5 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 23 Jan 2019 18:25:50 +0000 +Subject: [PATCH] char: vc_mem: Fix up compat ioctls for 64bit kernel + +compat_ioctl wasn't defined, so 32bit user/64bit kernel +always failed. +VC_MEM_IOC_MEM_PHYS_ADDR was defined with parameter size +unsigned long, so the ioctl cmd changes between sizes. + +Signed-off-by: Dave Stevenson +--- + drivers/char/broadcom/vc_mem.c | 40 +++++++++++++++++++++++++++++---- + include/linux/broadcom/vc_mem.h | 4 ++++ + 2 files changed, 40 insertions(+), 4 deletions(-) + +--- a/drivers/char/broadcom/vc_mem.c ++++ b/drivers/char/broadcom/vc_mem.c +@@ -148,7 +148,7 @@ vc_mem_ioctl(struct file *file, unsigned + (void) cmd; + (void) arg; + +- pr_debug("%s: called file = 0x%p\n", __func__, file); ++ pr_debug("%s: called file = 0x%p, cmd %08x\n", __func__, file, cmd); + + switch (cmd) { + case VC_MEM_IOC_MEM_PHYS_ADDR: +@@ -167,7 +167,7 @@ vc_mem_ioctl(struct file *file, unsigned + // Get the videocore memory size first + vc_mem_get_size(); + +- pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%u\n", __func__, ++ pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%x\n", __func__, + mm_vc_mem_size); + + if (copy_to_user((void *) arg, &mm_vc_mem_size, +@@ -181,7 +181,7 @@ vc_mem_ioctl(struct file *file, unsigned + // Get the videocore memory base + vc_mem_get_base(); + +- pr_debug("%s: VC_MEM_IOC_MEM_BASE=%u\n", __func__, ++ pr_debug("%s: VC_MEM_IOC_MEM_BASE=%x\n", __func__, + mm_vc_mem_base); + + if (copy_to_user((void *) arg, &mm_vc_mem_base, +@@ -195,7 +195,7 @@ vc_mem_ioctl(struct file *file, unsigned + // Get the videocore memory base + vc_mem_get_base(); + +- pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%u\n", __func__, ++ pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%x\n", __func__, + mm_vc_mem_base); + + if (copy_to_user((void *) arg, &mm_vc_mem_base, +@@ -214,6 +214,35 @@ vc_mem_ioctl(struct file *file, unsigned + return rc; + } + ++#ifdef CONFIG_COMPAT ++static long ++vc_mem_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int rc = 0; ++ ++ switch (cmd) { ++ case VC_MEM_IOC_MEM_PHYS_ADDR32: ++ pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR32=0x%p\n", ++ __func__, (void *)mm_vc_mem_phys_addr); ++ ++ /* This isn't correct, but will cover us for now as ++ * VideoCore is 32bit only. ++ */ ++ if (copy_to_user((void *)arg, &mm_vc_mem_phys_addr, ++ sizeof(compat_ulong_t))) ++ rc = -EFAULT; ++ ++ break; ++ ++ default: ++ rc = vc_mem_ioctl(file, cmd, arg); ++ break; ++ } ++ ++ return rc; ++} ++#endif ++ + /**************************************************************************** + * + * vc_mem_mmap +@@ -259,6 +288,9 @@ static const struct file_operations vc_m + .open = vc_mem_open, + .release = vc_mem_release, + .unlocked_ioctl = vc_mem_ioctl, ++#ifdef CONFIG_COMPAT ++ .compat_ioctl = vc_mem_compat_ioctl, ++#endif + .mmap = vc_mem_mmap, + }; + +--- a/include/linux/broadcom/vc_mem.h ++++ b/include/linux/broadcom/vc_mem.h +@@ -32,4 +32,8 @@ extern unsigned int mm_vc_mem_size; + extern int vc_mem_get_current_size( void ); + #endif + ++#ifdef CONFIG_COMPAT ++#define VC_MEM_IOC_MEM_PHYS_ADDR32 _IOR(VC_MEM_IOC_MAGIC, 0, compat_ulong_t) ++#endif ++ + #endif /* _VC_MEM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0289-char-vc_mem-Fix-all-coding-style-issues.patch b/target/linux/brcm2708/patches-4.19/950-0289-char-vc_mem-Fix-all-coding-style-issues.patch new file mode 100644 index 0000000000..e0b6adf2ae --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0289-char-vc_mem-Fix-all-coding-style-issues.patch @@ -0,0 +1,428 @@ +From 8d64f178c3568d212f3ddf05ea1ad7f103beeb86 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 23 Jan 2019 18:37:29 +0000 +Subject: [PATCH] char: vc_mem: Fix all coding style issues. + +Cleans up all checkpatch errors in vc_mem.c and vc_mem.h +No functional change to the code. + +Signed-off-by: Dave Stevenson +--- + drivers/char/broadcom/vc_mem.c | 177 +++++++++++--------------------- + include/linux/broadcom/vc_mem.h | 38 +++---- + 2 files changed, 77 insertions(+), 138 deletions(-) + +--- a/drivers/char/broadcom/vc_mem.c ++++ b/drivers/char/broadcom/vc_mem.c +@@ -1,16 +1,16 @@ +-/***************************************************************************** +-* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. +-* +-* Unless you and Broadcom execute a separate written software license +-* agreement governing use of this software, this software is licensed to you +-* under the terms of the GNU General Public License version 2, available at +-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +-* +-* Notwithstanding the above, under no circumstances may you combine this +-* software in any way with any other Broadcom software provided under a +-* license other than the GPL, without Broadcom's express prior written +-* consent. +-*****************************************************************************/ ++/* ++ * Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. ++ * ++ * Unless you and Broadcom execute a separate written software license ++ * agreement governing use of this software, this software is licensed to you ++ * under the terms of the GNU General Public License version 2, available at ++ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++ * ++ * Notwithstanding the above, under no circumstances may you combine this ++ * software in any way with any other Broadcom software provided under a ++ * license other than the GPL, without Broadcom's express prior written ++ * consent. ++ */ + + #include + #include +@@ -26,11 +26,11 @@ + + #define DRIVER_NAME "vc-mem" + +-// Device (/dev) related variables +-static dev_t vc_mem_devnum = 0; +-static struct class *vc_mem_class = NULL; ++/* Device (/dev) related variables */ ++static dev_t vc_mem_devnum; ++static struct class *vc_mem_class; + static struct cdev vc_mem_cdev; +-static int vc_mem_inited = 0; ++static int vc_mem_inited; + + #ifdef CONFIG_DEBUG_FS + static struct dentry *vc_mem_debugfs_entry; +@@ -50,96 +50,55 @@ static struct dentry *vc_mem_debugfs_ent + * bootloader (and/or kernel). When that happens, the values of these variables + * would be calculated and assigned in the init function. + */ +-// in the 2835 VC in mapped above ARM, but ARM has full access to VC space +-unsigned long mm_vc_mem_phys_addr = 0x00000000; +-unsigned int mm_vc_mem_size = 0; +-unsigned int mm_vc_mem_base = 0; +- ++/* In the 2835 VC in mapped above ARM, but ARM has full access to VC space */ ++unsigned long mm_vc_mem_phys_addr; + EXPORT_SYMBOL(mm_vc_mem_phys_addr); ++unsigned int mm_vc_mem_size; + EXPORT_SYMBOL(mm_vc_mem_size); ++unsigned int mm_vc_mem_base; + EXPORT_SYMBOL(mm_vc_mem_base); + +-static uint phys_addr = 0; +-static uint mem_size = 0; +-static uint mem_base = 0; +- +- +-/**************************************************************************** +-* +-* vc_mem_open +-* +-***************************************************************************/ ++static uint phys_addr; ++static uint mem_size; ++static uint mem_base; + + static int + vc_mem_open(struct inode *inode, struct file *file) + { +- (void) inode; +- (void) file; ++ (void)inode; + + pr_debug("%s: called file = 0x%p\n", __func__, file); + + return 0; + } + +-/**************************************************************************** +-* +-* vc_mem_release +-* +-***************************************************************************/ +- + static int + vc_mem_release(struct inode *inode, struct file *file) + { +- (void) inode; +- (void) file; ++ (void)inode; + + pr_debug("%s: called file = 0x%p\n", __func__, file); + + return 0; + } + +-/**************************************************************************** +-* +-* vc_mem_get_size +-* +-***************************************************************************/ +- + static void + vc_mem_get_size(void) + { + } + +-/**************************************************************************** +-* +-* vc_mem_get_base +-* +-***************************************************************************/ +- + static void + vc_mem_get_base(void) + { + } + +-/**************************************************************************** +-* +-* vc_mem_get_current_size +-* +-***************************************************************************/ +- + int + vc_mem_get_current_size(void) + { + return mm_vc_mem_size; + } +- + EXPORT_SYMBOL_GPL(vc_mem_get_current_size); + +-/**************************************************************************** +-* +-* vc_mem_ioctl +-* +-***************************************************************************/ +- + static long + vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) + { +@@ -154,52 +113,52 @@ vc_mem_ioctl(struct file *file, unsigned + case VC_MEM_IOC_MEM_PHYS_ADDR: + { + pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p\n", +- __func__, (void *) mm_vc_mem_phys_addr); ++ __func__, (void *)mm_vc_mem_phys_addr); + +- if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr, +- sizeof (mm_vc_mem_phys_addr)) != 0) { ++ if (copy_to_user((void *)arg, &mm_vc_mem_phys_addr, ++ sizeof(mm_vc_mem_phys_addr))) { + rc = -EFAULT; + } + break; + } + case VC_MEM_IOC_MEM_SIZE: + { +- // Get the videocore memory size first ++ /* Get the videocore memory size first */ + vc_mem_get_size(); + + pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%x\n", __func__, +- mm_vc_mem_size); ++ mm_vc_mem_size); + +- if (copy_to_user((void *) arg, &mm_vc_mem_size, +- sizeof (mm_vc_mem_size)) != 0) { ++ if (copy_to_user((void *)arg, &mm_vc_mem_size, ++ sizeof(mm_vc_mem_size))) { + rc = -EFAULT; + } + break; + } + case VC_MEM_IOC_MEM_BASE: + { +- // Get the videocore memory base ++ /* Get the videocore memory base */ + vc_mem_get_base(); + + pr_debug("%s: VC_MEM_IOC_MEM_BASE=%x\n", __func__, +- mm_vc_mem_base); ++ mm_vc_mem_base); + +- if (copy_to_user((void *) arg, &mm_vc_mem_base, +- sizeof (mm_vc_mem_base)) != 0) { ++ if (copy_to_user((void *)arg, &mm_vc_mem_base, ++ sizeof(mm_vc_mem_base))) { + rc = -EFAULT; + } + break; + } + case VC_MEM_IOC_MEM_LOAD: + { +- // Get the videocore memory base ++ /* Get the videocore memory base */ + vc_mem_get_base(); + + pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%x\n", __func__, + mm_vc_mem_base); + +- if (copy_to_user((void *) arg, &mm_vc_mem_base, +- sizeof (mm_vc_mem_base)) != 0) { ++ if (copy_to_user((void *)arg, &mm_vc_mem_base, ++ sizeof(mm_vc_mem_base))) { + rc = -EFAULT; + } + break; +@@ -243,12 +202,6 @@ vc_mem_compat_ioctl(struct file *file, u + } + #endif + +-/**************************************************************************** +-* +-* vc_mem_mmap +-* +-***************************************************************************/ +- + static int + vc_mem_mmap(struct file *filp, struct vm_area_struct *vma) + { +@@ -257,32 +210,26 @@ vc_mem_mmap(struct file *filp, struct vm + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + + pr_debug("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx\n", +- __func__, (long) vma->vm_start, (long) vma->vm_end, +- (long) vma->vm_pgoff); ++ __func__, (long)vma->vm_start, (long)vma->vm_end, ++ (long)vma->vm_pgoff); + + if (offset + length > mm_vc_mem_size) { + pr_err("%s: length %ld is too big\n", __func__, length); + return -EINVAL; + } +- // Do not cache the memory map ++ /* Do not cache the memory map */ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + rc = remap_pfn_range(vma, vma->vm_start, + (mm_vc_mem_phys_addr >> PAGE_SHIFT) + + vma->vm_pgoff, length, vma->vm_page_prot); +- if (rc != 0) { ++ if (rc) + pr_err("%s: remap_pfn_range failed (rc=%d)\n", __func__, rc); +- } + + return rc; + } + +-/**************************************************************************** +-* +-* File Operations for the driver. +-* +-***************************************************************************/ +- ++/* File Operations for the driver. */ + static const struct file_operations vc_mem_fops = { + .owner = THIS_MODULE, + .open = vc_mem_open, +@@ -316,7 +263,7 @@ static int vc_mem_debugfs_init( + vc_mem_debugfs_entry, + (u32 *)&mm_vc_mem_phys_addr)) { + dev_warn(dev, "%s:could not create vc_mem_phys entry\n", +- __func__); ++ __func__); + goto fail; + } + +@@ -325,7 +272,7 @@ static int vc_mem_debugfs_init( + vc_mem_debugfs_entry, + (u32 *)&mm_vc_mem_size)) { + dev_warn(dev, "%s:could not create vc_mem_size entry\n", +- __func__); ++ __func__); + goto fail; + } + +@@ -347,12 +294,7 @@ fail: + + #endif /* CONFIG_DEBUG_FS */ + +- +-/**************************************************************************** +-* +-* vc_mem_init +-* +-***************************************************************************/ ++/* Module load/unload functions */ + + static int __init + vc_mem_init(void) +@@ -369,16 +311,19 @@ vc_mem_init(void) + vc_mem_get_size(); + + pr_info("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n", +- mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024)); ++ mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, ++ mm_vc_mem_size / (1024 * 1024)); + +- if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) { ++ rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME); ++ if (rc < 0) { + pr_err("%s: alloc_chrdev_region failed (rc=%d)\n", + __func__, rc); + goto out_err; + } + + cdev_init(&vc_mem_cdev, &vc_mem_fops); +- if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) { ++ rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1); ++ if (rc) { + pr_err("%s: cdev_add failed (rc=%d)\n", __func__, rc); + goto out_unregister; + } +@@ -408,26 +353,20 @@ vc_mem_init(void) + + device_destroy(vc_mem_class, vc_mem_devnum); + +- out_class_destroy: ++out_class_destroy: + class_destroy(vc_mem_class); + vc_mem_class = NULL; + +- out_cdev_del: ++out_cdev_del: + cdev_del(&vc_mem_cdev); + +- out_unregister: ++out_unregister: + unregister_chrdev_region(vc_mem_devnum, 1); + +- out_err: ++out_err: + return -1; + } + +-/**************************************************************************** +-* +-* vc_mem_exit +-* +-***************************************************************************/ +- + static void __exit + vc_mem_exit(void) + { +--- a/include/linux/broadcom/vc_mem.h ++++ b/include/linux/broadcom/vc_mem.h +@@ -1,16 +1,16 @@ +-/***************************************************************************** +-* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. +-* +-* Unless you and Broadcom execute a separate written software license +-* agreement governing use of this software, this software is licensed to you +-* under the terms of the GNU General Public License version 2, available at +-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +-* +-* Notwithstanding the above, under no circumstances may you combine this +-* software in any way with any other Broadcom software provided under a +-* license other than the GPL, without Broadcom's express prior written +-* consent. +-*****************************************************************************/ ++/* ++ * Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. ++ * ++ * Unless you and Broadcom execute a separate written software license ++ * agreement governing use of this software, this software is licensed to you ++ * under the terms of the GNU General Public License version 2, available at ++ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++ * ++ * Notwithstanding the above, under no circumstances may you combine this ++ * software in any way with any other Broadcom software provided under a ++ * license other than the GPL, without Broadcom's express prior written ++ * consent. ++ */ + + #ifndef _VC_MEM_H + #define _VC_MEM_H +@@ -19,17 +19,17 @@ + + #define VC_MEM_IOC_MAGIC 'v' + +-#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long ) +-#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int ) +-#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int ) +-#define VC_MEM_IOC_MEM_LOAD _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int ) ++#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR(VC_MEM_IOC_MAGIC, 0, unsigned long) ++#define VC_MEM_IOC_MEM_SIZE _IOR(VC_MEM_IOC_MAGIC, 1, unsigned int) ++#define VC_MEM_IOC_MEM_BASE _IOR(VC_MEM_IOC_MAGIC, 2, unsigned int) ++#define VC_MEM_IOC_MEM_LOAD _IOR(VC_MEM_IOC_MAGIC, 3, unsigned int) + +-#if defined( __KERNEL__ ) ++#ifdef __KERNEL__ + #define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF + + extern unsigned long mm_vc_mem_phys_addr; + extern unsigned int mm_vc_mem_size; +-extern int vc_mem_get_current_size( void ); ++extern int vc_mem_get_current_size(void); + #endif + + #ifdef CONFIG_COMPAT diff --git a/target/linux/brcm2708/patches-4.19/950-0289-overlays-Update-README-with-removal-of-lirc-rpi.patch b/target/linux/brcm2708/patches-4.19/950-0289-overlays-Update-README-with-removal-of-lirc-rpi.patch deleted file mode 100644 index 9886c85ac5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0289-overlays-Update-README-with-removal-of-lirc-rpi.patch +++ /dev/null @@ -1,91 +0,0 @@ -From f2c24ce7e03d059fa9f674d8ebf6286e8f0c38b6 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 5 Dec 2018 11:56:40 +0000 -Subject: [PATCH 289/806] overlays: Update README with removal of lirc-rpi - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 57 ++++++++++++------------------- - 1 file changed, 21 insertions(+), 36 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -56,23 +56,29 @@ have its contents deleted (or commented - Using Overlays - ============== - --Overlays are loaded using the "dtoverlay" directive. As an example, consider --the popular lirc-rpi module, the Linux Infrared Remote Control driver. In the --pre-DT world this would be loaded from /etc/modules, with an explicit --"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled, --this becomes a line in config.txt: -- -- dtoverlay=lirc-rpi -- --This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By --default it will use GPIOs 17 (out) and 18 (in), but this can be modified using --DT parameters: -- -- dtoverlay=lirc-rpi,gpio_out_pin=17,gpio_in_pin=13 -- --Parameters always have default values, although in some cases (e.g. "w1-gpio") --it is necessary to provided multiple overlays in order to get the desired --behaviour. See the list of overlays below for a description of the parameters -+Overlays are loaded using the "dtoverlay" config.txt setting. As an example, -+consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded -+by writing a magic string comprising a device identifier and an I2C address to -+a special file in /sys/class/i2c-adapter, having first loaded the driver for -+the I2C interface and the RTC device - something like this: -+ -+ modprobe i2c-bcm2835 -+ modprobe rtc-ds1307 -+ echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device -+ -+With DT enabled, this becomes a line in config.txt: -+ -+ dtoverlay=i2c-rtc,ds1307 -+ -+This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node" -+describing the DS1307 I2C device to be added to the Device Tree for the Pi. By -+default it usees address 0x68, but this can be modified with an additional DT -+parameter: -+ -+ dtoverlay=i2c-rtc,ds1307,addr=0x68 -+ -+Parameters usually have default values, although certain parameters are -+mandatory. See the list of overlays below for a description of the parameters - and their defaults. - - The Overlay and Parameter Reference -@@ -1135,29 +1141,8 @@ Params: - - - Name: lirc-rpi --Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi) -- Consult the module documentation for more details. --Load: dtoverlay=lirc-rpi,= --Params: gpio_out_pin GPIO for output (default "17") -- -- gpio_in_pin GPIO for input (default "18") -- -- gpio_in_pull Pull up/down/off on the input pin -- (default "down") -- -- sense Override the IR receive auto-detection logic: -- "0" = force active-high -- "1" = force active-low -- "-1" = use auto-detection -- (default "-1") -- -- softcarrier Turn the software carrier "on" or "off" -- (default "on") -- -- invert "on" = invert the output pin (default "off") -- -- debug "on" = enable additional debug messages -- (default "off") -+Info: This overlay has been deprecated and removed - see gpio-ir -+Load: - - - Name: ltc294x diff --git a/target/linux/brcm2708/patches-4.19/950-0290-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch b/target/linux/brcm2708/patches-4.19/950-0290-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch new file mode 100644 index 0000000000..ee4fbbda2d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0290-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch @@ -0,0 +1,24 @@ +From 83a7175c91133a3e7a746693847b447bf6297094 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 24 Jan 2019 15:09:28 +0000 +Subject: [PATCH] clk: clk-bcm2835: Use %zd when printing size_t + +The debug text for how many clocks have been registered +uses "%d" with a size_t. Correct it to "%zd". + +Signed-off-by: Dave Stevenson +--- + drivers/clk/bcm/clk-bcm2835.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -2271,7 +2271,7 @@ static int bcm2835_clk_probe(struct plat + return ret; + + /* note that we have registered all the clocks */ +- dev_dbg(dev, "registered %d clocks\n", asize); ++ dev_dbg(dev, "registered %zd clocks\n", asize); + + return 0; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0290-staging-bcm2835-camera-Check-the-error-for-REPEAT_SE.patch b/target/linux/brcm2708/patches-4.19/950-0290-staging-bcm2835-camera-Check-the-error-for-REPEAT_SE.patch deleted file mode 100644 index b781c9eb36..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0290-staging-bcm2835-camera-Check-the-error-for-REPEAT_SE.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 81f6d4e84fd127cf0b31c9822a2beb9b298aa7bb Mon Sep 17 00:00:00 2001 -From: 6by9 <6by9@users.noreply.github.com> -Date: Tue, 11 Dec 2018 15:18:02 +0000 -Subject: [PATCH 290/806] staging: bcm2835-camera: Check the error for - REPEAT_SEQ_HEADER (#2782) - -When handling for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER was added -the firmware would reject the setting if H264 hadn't already been -selected. This was fixed in the firmware at that point, but to -enable backwards compatibility the returned error was ignored. - -That was Dec 2013, so the chances of having a firmware that still -has that issue is so close to zero that the workaround can be -removed. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/bcm2835-camera/controls.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -1100,7 +1100,7 @@ static const struct bm2835_mmal_v4l2_ctr - 0, 1, NULL, - MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER, - &ctrl_set_video_encode_param_output, -- true /* Errors ignored as requires latest firmware to work */ -+ false - }, - { - V4L2_CID_MPEG_VIDEO_H264_PROFILE, diff --git a/target/linux/brcm2708/patches-4.19/950-0291-gpio-ir-change-default-pull-configuration-to-up.patch b/target/linux/brcm2708/patches-4.19/950-0291-gpio-ir-change-default-pull-configuration-to-up.patch deleted file mode 100644 index d68ea95e58..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0291-gpio-ir-change-default-pull-configuration-to-up.patch +++ /dev/null @@ -1,47 +0,0 @@ -From d1cf5fb57ee5ee4512a93614d67d15af9c8070b2 Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Wed, 9 Jan 2019 14:51:01 +0100 -Subject: [PATCH 291/806] gpio-ir: change default pull configuration to up - -IR receivers like the TSOP series from Vishay and compatible ones -have active-low open collector outputs with an internal pull up of -about 30k (according to the TSOP datasheets). - -Activating a pull-down resistor on the GPIO will make it work against -the pull-up in the IR receiver and brings the idle input voltage down -to about 1.9V (measured on a RPi3B+ with a TSOP4438). While that's -usually enough to make the RPi see a high signal it's certainly not -optimal and may even fail when using an IR receiver with a weaker pull-up. - -Switching the default GPIO pull to "up" results in an input voltage -level of about 3.3V and ensures that an idle state (high signal) will -be detected if no IR receiver is attached. - -Signed-off-by: Matthias Reichl ---- - arch/arm/boot/dts/overlays/README | 2 +- - arch/arm/boot/dts/overlays/gpio-ir-overlay.dts | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -611,7 +611,7 @@ Load: dtoverlay=gpio-ir,= - Params: gpio_pin Input pin number. Default is 18. - - gpio_pull Desired pull-up/down state (off, down, up) -- Default is "down". -+ Default is "up". - - rc-map-name Default rc keymap (can also be changed by - ir-keytable), defaults to "rc-rc6-mce" ---- a/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts -+++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts -@@ -30,7 +30,7 @@ - gpio_ir_pins: gpio_ir_pins@12 { - brcm,pins = <18>; // pin 18 - brcm,function = <0>; // in -- brcm,pull = <1>; // down -+ brcm,pull = <2>; // up - }; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0291-mfd-Add-rpi_sense_core-of-compatible-string.patch b/target/linux/brcm2708/patches-4.19/950-0291-mfd-Add-rpi_sense_core-of-compatible-string.patch new file mode 100644 index 0000000000..0647b0532a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0291-mfd-Add-rpi_sense_core-of-compatible-string.patch @@ -0,0 +1,26 @@ +From 3e1371cc80a8153885cf87b06053ab2a2f1a1e66 Mon Sep 17 00:00:00 2001 +From: Serge Schneider +Date: Tue, 29 Jan 2019 12:05:49 +0000 +Subject: [PATCH] mfd: Add rpi_sense_core of compatible string + +--- + drivers/mfd/rpisense-core.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/mfd/rpisense-core.c ++++ b/drivers/mfd/rpisense-core.c +@@ -138,6 +138,14 @@ static const struct i2c_device_id rpisen + }; + MODULE_DEVICE_TABLE(i2c, rpisense_i2c_id); + ++#ifdef CONFIG_OF ++static const struct of_device_id rpisense_core_id[] = { ++ { .compatible = "rpi,rpi-sense" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, rpisense_core_id); ++#endif ++ + + static struct i2c_driver rpisense_driver = { + .driver = { diff --git a/target/linux/brcm2708/patches-4.19/950-0292-firmware-raspberrypi-Report-the-fw-variant-during-pr.patch b/target/linux/brcm2708/patches-4.19/950-0292-firmware-raspberrypi-Report-the-fw-variant-during-pr.patch deleted file mode 100644 index 36e57e825f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0292-firmware-raspberrypi-Report-the-fw-variant-during-pr.patch +++ /dev/null @@ -1,79 +0,0 @@ -From dfd66230d2d538e7f290436d2952124d6eadeb3d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 10 Jan 2019 17:58:06 +0000 -Subject: [PATCH 292/806] firmware: raspberrypi: Report the fw variant during - probe - -The driver already reported the firmware build date during probe. -The mailbox calls have been extended to also report the variant - 1 = standard start.elf - 2 = start_x.elf (includes camera stack) - 3 = start_db.elf (includes assert logging) - 4 = start_cd.elf (cutdown version for smallest memory footprint). -Log the variant during probe. - -Signed-off-by: Dave Stevenson ---- - drivers/firmware/raspberrypi.c | 32 +++++++++++++++++----- - include/soc/bcm2835/raspberrypi-firmware.h | 1 + - 2 files changed, 26 insertions(+), 7 deletions(-) - ---- a/drivers/firmware/raspberrypi.c -+++ b/drivers/firmware/raspberrypi.c -@@ -227,21 +227,39 @@ static const struct attribute_group rpi_ - static void - rpi_firmware_print_firmware_revision(struct rpi_firmware *fw) - { -+ static const char * const variant_strs[] = { -+ "unknown", -+ "start", -+ "start_x", -+ "start_db", -+ "start_cd", -+ }; -+ const char *variant_str = "cmd unsupported"; - u32 packet; -+ u32 variant; -+ struct tm tm; - int ret = rpi_firmware_property(fw, - RPI_FIRMWARE_GET_FIRMWARE_REVISION, - &packet, sizeof(packet)); - -- if (ret == 0) { -- struct tm tm; -+ if (ret) -+ return; - -- time64_to_tm(packet, 0, &tm); -+ ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_FIRMWARE_VARIANT, -+ &variant, sizeof(variant)); - -- dev_info(fw->cl.dev, -- "Attached to firmware from %04ld-%02d-%02d %02d:%02d\n", -- tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, -- tm.tm_hour, tm.tm_min); -+ if (!ret) { -+ if (variant >= ARRAY_SIZE(variant_strs)) -+ variant = 0; -+ variant_str = variant_strs[variant]; - } -+ -+ time64_to_tm(packet, 0, &tm); -+ -+ dev_info(fw->cl.dev, -+ "Attached to firmware from %04ld-%02d-%02d %02d:%02d, variant %s\n", -+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, -+ tm.tm_min, variant_str); - } - - static void ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -41,6 +41,7 @@ struct rpi_firmware_property_tag_header - enum rpi_firmware_property_tag { - RPI_FIRMWARE_PROPERTY_END = 0, - RPI_FIRMWARE_GET_FIRMWARE_REVISION = 0x00000001, -+ RPI_FIRMWARE_GET_FIRMWARE_VARIANT = 0x00000002, - - RPI_FIRMWARE_SET_CURSOR_INFO = 0x00008010, - RPI_FIRMWARE_SET_CURSOR_STATE = 0x00008011, diff --git a/target/linux/brcm2708/patches-4.19/950-0292-gpu-vc4_firmware_kms-Fix-up-64-bit-compile-warnings.patch b/target/linux/brcm2708/patches-4.19/950-0292-gpu-vc4_firmware_kms-Fix-up-64-bit-compile-warnings.patch new file mode 100644 index 0000000000..cadf49ebc8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0292-gpu-vc4_firmware_kms-Fix-up-64-bit-compile-warnings.patch @@ -0,0 +1,66 @@ +From 32e0a9e2549c43d9abc03427ba6f3b7b8c2e1407 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 28 Jan 2019 14:40:16 +0000 +Subject: [PATCH] gpu: vc4_firmware_kms: Fix up 64 bit compile + warnings. + +Resolve two build warnings with regard using incorrectly +sized parameters in logging messages on 64 bit builds. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 11 ++++++----- + 1 file changed, 6 insertions(+), 5 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -160,14 +160,14 @@ static void vc4_primary_plane_atomic_upd + WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); + } + +- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%08x/%d\n", ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%pad/%d\n", + plane->base.id, plane->name, + state->crtc_w, + state->crtc_h, + bpp, + state->crtc_x, + state->crtc_y, +- bo->paddr + fb->offsets[0], ++ &fbinfo->base, + fb->pitches[0]); + + ret = rpi_firmware_transaction(vc4->firmware, +@@ -197,6 +197,7 @@ static void vc4_cursor_plane_atomic_upda + struct drm_plane_state *state = plane->state; + struct drm_framebuffer *fb = state->fb; + struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); ++ dma_addr_t addr = bo->paddr + fb->offsets[0]; + int ret; + u32 packet_state[] = { + state->crtc->state->active, +@@ -206,13 +207,13 @@ static void vc4_cursor_plane_atomic_upda + }; + WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); + +- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%08x/%d)", ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%pad/%d)", + plane->base.id, plane->name, + state->crtc_w, + state->crtc_h, + state->crtc_x, + state->crtc_y, +- bo->paddr + fb->offsets[0], ++ &addr, + fb->pitches[0]); + + /* add on the top/left offsets when overscan is active */ +@@ -238,7 +239,7 @@ static void vc4_cursor_plane_atomic_upda + fb != old_state->fb) { + u32 packet_info[] = { state->crtc_w, state->crtc_h, + 0, /* unused */ +- bo->paddr + fb->offsets[0], ++ addr, + 0, 0, /* hotx, hoty */}; + + ret = rpi_firmware_property(vc4->firmware, diff --git a/target/linux/brcm2708/patches-4.19/950-0293-firmware-raspberrypi-Report-the-fw-git-hash-during-p.patch b/target/linux/brcm2708/patches-4.19/950-0293-firmware-raspberrypi-Report-the-fw-git-hash-during-p.patch deleted file mode 100644 index 90fa066e32..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0293-firmware-raspberrypi-Report-the-fw-git-hash-during-p.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 9abde0ff52268580501b3120629f3c92f0e5d589 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 10 Jan 2019 18:48:54 +0000 -Subject: [PATCH 293/806] firmware: raspberrypi: Report the fw git hash during - probe - -The firmware can now report the git hash from which it was built -via the mailbox, so report it during probe. - -Signed-off-by: Dave Stevenson ---- - drivers/firmware/raspberrypi.c | 17 +++++++++++++++++ - include/soc/bcm2835/raspberrypi-firmware.h | 1 + - 2 files changed, 18 insertions(+) - ---- a/drivers/firmware/raspberrypi.c -+++ b/drivers/firmware/raspberrypi.c -@@ -263,6 +263,22 @@ rpi_firmware_print_firmware_revision(str - } - - static void -+rpi_firmware_print_firmware_hash(struct rpi_firmware *fw) -+{ -+ u32 hash[5]; -+ int ret = rpi_firmware_property(fw, -+ RPI_FIRMWARE_GET_FIRMWARE_HASH, -+ hash, sizeof(hash)); -+ -+ if (ret) -+ return; -+ -+ dev_info(fw->cl.dev, -+ "Firmware hash is %08x%08x%08x%08x%08x\n", -+ hash[0], hash[1], hash[2], hash[3], hash[4]); -+} -+ -+static void - rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw) - { - u32 packet; -@@ -308,6 +324,7 @@ static int rpi_firmware_probe(struct pla - g_pdev = pdev; - - rpi_firmware_print_firmware_revision(fw); -+ rpi_firmware_print_firmware_hash(fw); - rpi_register_hwmon_driver(dev, fw); - - return 0; ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -42,6 +42,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_PROPERTY_END = 0, - RPI_FIRMWARE_GET_FIRMWARE_REVISION = 0x00000001, - RPI_FIRMWARE_GET_FIRMWARE_VARIANT = 0x00000002, -+ RPI_FIRMWARE_GET_FIRMWARE_HASH = 0x00000003, - - RPI_FIRMWARE_SET_CURSOR_INFO = 0x00008010, - RPI_FIRMWARE_SET_CURSOR_STATE = 0x00008011, diff --git a/target/linux/brcm2708/patches-4.19/950-0293-input-rpi-ft5406-Clear-build-warning-on-64-bit-build.patch b/target/linux/brcm2708/patches-4.19/950-0293-input-rpi-ft5406-Clear-build-warning-on-64-bit-build.patch new file mode 100644 index 0000000000..d014697a3a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0293-input-rpi-ft5406-Clear-build-warning-on-64-bit-build.patch @@ -0,0 +1,26 @@ +From 61ce13e4ab846aa035037217c5eec6aff229e539 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 28 Jan 2019 14:42:34 +0000 +Subject: [PATCH] input: rpi-ft5406: Clear build warning on 64 bit + builds. + +Resolve 64 bit build warning over using %x with a dma_addr_t. + +Signed-off-by: Dave Stevenson +--- + drivers/input/touchscreen/rpi-ft5406.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/input/touchscreen/rpi-ft5406.c ++++ b/drivers/input/touchscreen/rpi-ft5406.c +@@ -218,8 +218,8 @@ static int ft5406_probe(struct platform_ + + if (!ts->ts_base) { + dev_warn(dev, +- "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", +- err, touchbuf, ts->ts_base, ts->bus_addr); ++ "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%pad)\n", ++ err, touchbuf, ts->ts_base, &ts->bus_addr); + + err = rpi_firmware_property( + fw, diff --git a/target/linux/brcm2708/patches-4.19/950-0294-arm64-dts-broadcom-Enable-fixups-for-overlays.patch b/target/linux/brcm2708/patches-4.19/950-0294-arm64-dts-broadcom-Enable-fixups-for-overlays.patch deleted file mode 100644 index 44c3429c8c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0294-arm64-dts-broadcom-Enable-fixups-for-overlays.patch +++ /dev/null @@ -1,23 +0,0 @@ -From bb8f38337d08dc1ac78ab251aa0b515eea45a79e Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 15 Jan 2019 09:56:41 +0000 -Subject: [PATCH 294/806] arm64: dts: broadcom: Enable fixups for overlays - -See: https://github.com/raspberrypi/linux/pull/2733 - -Signed-off-by: Phil Elwell ---- - arch/arm64/boot/dts/broadcom/Makefile | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -9,3 +9,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rp - - subdir-y += northstar2 - subdir-y += stingray -+ -+# Enable fixups to support overlays on BCM2835 platforms -+ifeq ($(CONFIG_ARCH_BCM2835),y) -+ DTC_FLAGS ?= -@ -+endif diff --git a/target/linux/brcm2708/patches-4.19/950-0294-dtoverlays-Correct-DT-handling-camera-GPIOs.patch b/target/linux/brcm2708/patches-4.19/950-0294-dtoverlays-Correct-DT-handling-camera-GPIOs.patch new file mode 100644 index 0000000000..9d6471052d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0294-dtoverlays-Correct-DT-handling-camera-GPIOs.patch @@ -0,0 +1,85 @@ +From 5c0dfdba54fdaeb813d8535283aa8f75080e1055 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 18 Sep 2018 10:47:38 +0100 +Subject: [PATCH] dtoverlays: Correct DT handling camera GPIOs + +The firmware has support for updating overrides with the correct +GPIO settings for the camera GPIOs, but the wrong device tree +setup ended up being merged. +Correct the DT configuration so that the firmware does set it +up correctly. + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/bcm270x.dtsi | 7 +++++++ + arch/arm/boot/dts/overlays/README | 10 +--------- + arch/arm/boot/dts/overlays/ov5647-overlay.dts | 14 +++++++++++--- + 3 files changed, 19 insertions(+), 12 deletions(-) + +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -152,6 +152,13 @@ + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; ++ ++ __overrides__ { ++ cam0-pwdn-ctrl; ++ cam0-pwdn; ++ cam0-led-ctrl; ++ cam0-led; ++ }; + }; + + &vc4 { +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1366,15 +1366,7 @@ Info: Omnivision OV5647 camera module. + Uses Unicam 1, which is the standard camera connector on most Pi + variants. + Load: dtoverlay=ov5647,= +-Params: cam0-pwdn GPIO used to control the sensor powerdown line. +- +- cam0-led GPIO used to control the sensor led +- Both these fields should be automatically filled +- in by the firmware to reflect the default GPIO +- configuration of the particular Pi variant in +- use. +- +- i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. ++Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. + Useful on Compute Modules. + + i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. +--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts +@@ -14,7 +14,7 @@ + status = "okay"; + + ov5647: ov5647@36 { +- compatible = "ov5647"; ++ compatible = "ovti,ov5647"; + reg = <0x36>; + status = "okay"; + +@@ -82,10 +82,18 @@ + }; + }; + ++ fragment@6 { ++ target-path="/__overrides__"; ++ __overlay__ { ++ cam0-pwdn-ctrl = <&ov5647>,"pwdn-gpios:0"; ++ cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; ++ cam0-led-ctrl = <&ov5647>,"pwdn-gpios:12"; ++ cam0-led = <&ov5647>,"pwdn-gpios:16"; ++ }; ++ }; ++ + __overrides__ { + i2c_pins_0_1 = <0>,"-2-3+4"; + i2c_pins_28_29 = <0>,"+2-3-4"; +- cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; +- cam0-led = <&ov5647>,"pwdn-gpios:16"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0295-media-ov5647-Use-gpiod_set_value_cansleep.patch b/target/linux/brcm2708/patches-4.19/950-0295-media-ov5647-Use-gpiod_set_value_cansleep.patch new file mode 100644 index 0000000000..e88afb0550 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0295-media-ov5647-Use-gpiod_set_value_cansleep.patch @@ -0,0 +1,54 @@ +From 3be30ee1b3aafd7c6cc45bcea77f25c9613732f4 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 18 Sep 2018 11:08:51 +0100 +Subject: [PATCH] media: ov5647: Use gpiod_set_value_cansleep + +All calls to the gpio library are in contexts that can sleep, +therefore there is no issue with having those GPIOs controlled +by controllers which require sleeping (eg I2C GPIO expanders). + +Switch to using gpiod_set_value_cansleep instead of gpiod_set_value +to avoid triggering the warning in gpiolib should the GPIO +controller need to sleep. + +Signed-off-by: Dave Stevenson +--- + drivers/media/i2c/ov5647.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/media/i2c/ov5647.c ++++ b/drivers/media/i2c/ov5647.c +@@ -373,7 +373,7 @@ static int ov5647_sensor_power(struct v4 + dev_dbg(&client->dev, "OV5647 power on\n"); + + if (ov5647->pwdn) { +- gpiod_set_value(ov5647->pwdn, 0); ++ gpiod_set_value_cansleep(ov5647->pwdn, 0); + msleep(PWDN_ACTIVE_DELAY_MS); + } + +@@ -415,7 +415,7 @@ static int ov5647_sensor_power(struct v4 + + clk_disable_unprepare(ov5647->xclk); + +- gpiod_set_value(ov5647->pwdn, 1); ++ gpiod_set_value_cansleep(ov5647->pwdn, 1); + } + + /* Update the power count. */ +@@ -649,13 +649,13 @@ static int ov5647_probe(struct i2c_clien + goto mutex_remove; + + if (sensor->pwdn) { +- gpiod_set_value(sensor->pwdn, 0); ++ gpiod_set_value_cansleep(sensor->pwdn, 0); + msleep(PWDN_ACTIVE_DELAY_MS); + } + + ret = ov5647_detect(sd); + +- gpiod_set_value(sensor->pwdn, 1); ++ gpiod_set_value_cansleep(sensor->pwdn, 1); + + if (ret < 0) + goto error; diff --git a/target/linux/brcm2708/patches-4.19/950-0296-dtoverlays-fe-pi-audio-fix-sgtl5000-compatible-strin.patch b/target/linux/brcm2708/patches-4.19/950-0296-dtoverlays-fe-pi-audio-fix-sgtl5000-compatible-strin.patch deleted file mode 100644 index 7e7dcd028e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0296-dtoverlays-fe-pi-audio-fix-sgtl5000-compatible-strin.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 1d26e4d72f2d0563cc6455e682a5d4c491de178c Mon Sep 17 00:00:00 2001 -From: Ben Wolsieffer -Date: Sun, 9 Dec 2018 16:46:00 -0500 -Subject: [PATCH 296/806] dtoverlays: fe-pi-audio: fix sgtl5000 compatible - string - -The compatible string was set to "fepi,sgtl5000", which worked for some -reason in 4.14, but does not work in 4.19, presumably due to some -change in the kernel matching logic. The correct string is -"fsl,sgtl5000". - -Signed-off-by: Ben Wolsieffer ---- - arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts -@@ -39,7 +39,7 @@ - - sgtl5000@0a { - #sound-dai-cells = <0>; -- compatible = "fepi,sgtl5000"; -+ compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&sgtl5000_mclk>; - micbias-resistor-k-ohms = <2>; diff --git a/target/linux/brcm2708/patches-4.19/950-0296-media-bcm2835-unicam-Power-on-subdev-on-open-release.patch b/target/linux/brcm2708/patches-4.19/950-0296-media-bcm2835-unicam-Power-on-subdev-on-open-release.patch new file mode 100644 index 0000000000..0946b77037 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0296-media-bcm2835-unicam-Power-on-subdev-on-open-release.patch @@ -0,0 +1,121 @@ +From bf1805e0c8c4fc05e2a13b0a03b510ff4e523418 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 29 Jan 2019 15:56:10 +0000 +Subject: [PATCH] media:bcm2835-unicam: Power on subdev on + open/release, not streaming + +The driver was powering on the source subdevice as part of STREAMON, +and powering it off in STREAMOFF. This isn't so great if there is a +significant amount of setup required for your device. + +Copy the approach taken in the Atmel ISC driver where s_power(1) is called +on first file handle open, and s_power(0) is called on the last release. + +See https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=232437 + +Signed-off-by: Dave Stevenson +--- + .../media/platform/bcm2835/bcm2835-unicam.c | 68 +++++++++++++++---- + 1 file changed, 54 insertions(+), 14 deletions(-) + +--- a/drivers/media/platform/bcm2835/bcm2835-unicam.c ++++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c +@@ -1237,11 +1237,6 @@ static int unicam_start_streaming(struct + unicam_err(dev, "Failed to enable CSI clock: %d\n", ret); + goto err_pm_put; + } +- ret = v4l2_subdev_call(dev->sensor, core, s_power, 1); +- if (ret < 0 && ret != -ENOIOCTLCMD) { +- unicam_err(dev, "power on failed in subdev\n"); +- goto err_clock_unprepare; +- } + dev->streaming = 1; + + unicam_start_rx(dev, addr); +@@ -1256,8 +1251,6 @@ static int unicam_start_streaming(struct + + err_disable_unicam: + unicam_disable(dev); +- v4l2_subdev_call(dev->sensor, core, s_power, 0); +-err_clock_unprepare: + clk_disable_unprepare(dev->clock); + err_pm_put: + unicam_runtime_put(dev); +@@ -1306,11 +1299,6 @@ static void unicam_stop_streaming(struct + dev->next_frm = NULL; + spin_unlock_irqrestore(&dev->dma_queue_lock, flags); + +- if (v4l2_subdev_has_op(dev->sensor, core, s_power)) { +- if (v4l2_subdev_call(dev->sensor, core, s_power, 0) < 0) +- unicam_err(dev, "power off failed in subdev\n"); +- } +- + clk_disable_unprepare(dev->clock); + unicam_runtime_put(dev); + } +@@ -1543,11 +1531,63 @@ static const struct vb2_ops unicam_video + .stop_streaming = unicam_stop_streaming, + }; + ++/* ++ * unicam_open : This function is based on the v4l2_fh_open helper function. ++ * It has been augmented to handle sensor subdevice power management, ++ */ ++static int unicam_open(struct file *file) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ int ret; ++ ++ mutex_lock(&dev->lock); ++ ++ ret = v4l2_fh_open(file); ++ if (ret) { ++ unicam_err(dev, "v4l2_fh_open failed\n"); ++ goto unlock; ++ } ++ ++ if (!v4l2_fh_is_singular_file(file)) ++ goto unlock; ++ ++ ret = v4l2_subdev_call(dev->sensor, core, s_power, 1); ++ if (ret < 0 && ret != -ENOIOCTLCMD) { ++ v4l2_fh_release(file); ++ goto unlock; ++ } ++ ++unlock: ++ mutex_unlock(&dev->lock); ++ return ret; ++} ++ ++static int unicam_release(struct file *file) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ struct v4l2_subdev *sd = dev->sensor; ++ bool fh_singular; ++ int ret; ++ ++ mutex_lock(&dev->lock); ++ ++ fh_singular = v4l2_fh_is_singular_file(file); ++ ++ ret = _vb2_fop_release(file, NULL); ++ ++ if (fh_singular) ++ v4l2_subdev_call(sd, core, s_power, 0); ++ ++ mutex_unlock(&dev->lock); ++ ++ return ret; ++} ++ + /* unicam capture driver file operations */ + static const struct v4l2_file_operations unicam_fops = { + .owner = THIS_MODULE, +- .open = v4l2_fh_open, +- .release = vb2_fop_release, ++ .open = unicam_open, ++ .release = unicam_release, + .read = vb2_fop_read, + .poll = vb2_fop_poll, + .unlocked_ioctl = video_ioctl2, diff --git a/target/linux/brcm2708/patches-4.19/950-0297-audioinjector-octo-revert-to-dummy-supplies.patch b/target/linux/brcm2708/patches-4.19/950-0297-audioinjector-octo-revert-to-dummy-supplies.patch new file mode 100644 index 0000000000..760a7bfdc8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0297-audioinjector-octo-revert-to-dummy-supplies.patch @@ -0,0 +1,23 @@ +From 0e69aceab4e7615cf631a8c7bdb25093cbba240a Mon Sep 17 00:00:00 2001 +From: Matt Flax +Date: Tue, 29 Jan 2019 14:56:03 +1100 +Subject: [PATCH] audioinjector-octo: revert to dummy supplies + +The Audio Injector Octo has had a lot of reports of not coming up on power cycles. By reverting to dummy supplies, the card comes up reliably. +--- + arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts | 4 ---- + 1 file changed, 4 deletions(-) + +--- a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts ++++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts +@@ -25,10 +25,6 @@ + reg = <0x48>; + clocks = <&cs42448_mclk>; + clock-names = "mclk"; +- VA-supply = <&vdd_5v0_reg>; +- VD-supply = <&vdd_3v3_reg>; +- VLS-supply = <&vdd_3v3_reg>; +- VLC-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0297-bcm2835_smi-re-add-dereference-to-fix-DMA-transfers.patch b/target/linux/brcm2708/patches-4.19/950-0297-bcm2835_smi-re-add-dereference-to-fix-DMA-transfers.patch deleted file mode 100644 index 1c1f5e6e73..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0297-bcm2835_smi-re-add-dereference-to-fix-DMA-transfers.patch +++ /dev/null @@ -1,20 +0,0 @@ -From e5111d81c8efc17d8d585510980d3fe49c998741 Mon Sep 17 00:00:00 2001 -From: Ezekiel Bethel -Date: Wed, 12 Dec 2018 19:11:13 +0000 -Subject: [PATCH 297/806] bcm2835_smi: re-add dereference to fix DMA transfers - ---- - drivers/misc/bcm2835_smi.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/misc/bcm2835_smi.c -+++ b/drivers/misc/bcm2835_smi.c -@@ -879,7 +879,7 @@ static int bcm2835_smi_probe(struct plat - goto err; - } - addr = of_get_address(node, 0, NULL, NULL); -- inst->smi_regs_busaddr = be32_to_cpu(addr); -+ inst->smi_regs_busaddr = be32_to_cpu(*addr); - - err = bcm2835_smi_dma_setup(inst); - if (err) diff --git a/target/linux/brcm2708/patches-4.19/950-0298-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch b/target/linux/brcm2708/patches-4.19/950-0298-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch deleted file mode 100644 index bff441c5e0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0298-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 020ee4d0d438b830ee40da8d9d3414de156a11e7 Mon Sep 17 00:00:00 2001 -From: Joshua Emele -Date: Wed, 7 Nov 2018 16:07:40 -0800 -Subject: [PATCH 298/806] lan78xx: Debounce link events to minimize poll storm - -The bInterval is set to 4 (i.e. 8 microframes => 1ms) and the only bit -that the driver pays attention to is "link was reset". If there's a -flapping status bit in that endpoint data, (such as if PHY negotiation -needs a few tries to get a stable link) then polling at a slower rate -would act as a de-bounce. - -See: https://github.com/raspberrypi/linux/issues/2447 ---- - drivers/net/usb/lan78xx.c | 12 +++++++++++- - 1 file changed, 11 insertions(+), 1 deletion(-) - ---- a/drivers/net/usb/lan78xx.c -+++ b/drivers/net/usb/lan78xx.c -@@ -448,6 +448,11 @@ static bool enable_tso; - module_param(enable_tso, bool, 0644); - MODULE_PARM_DESC(enable_tso, "Enables TCP segmentation offload"); - -+#define INT_URB_MICROFRAMES_PER_MS 8 -+static int int_urb_interval_ms = 8; -+module_param(int_urb_interval_ms, int, 0); -+MODULE_PARM_DESC(int_urb_interval_ms, "Override usb interrupt urb interval"); -+ - static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data) - { - u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL); -@@ -3824,7 +3829,12 @@ static int lan78xx_probe(struct usb_inte - dev->pipe_intr = usb_rcvintpipe(dev->udev, - dev->ep_intr->desc.bEndpointAddress & - USB_ENDPOINT_NUMBER_MASK); -- period = dev->ep_intr->desc.bInterval; -+ if (int_urb_interval_ms <= 0) -+ period = dev->ep_intr->desc.bInterval; -+ else -+ period = int_urb_interval_ms * INT_URB_MICROFRAMES_PER_MS; -+ -+ netif_notice(dev, probe, netdev, "int urb period %d\n", period); - - maxp = usb_maxpacket(dev->udev, dev->pipe_intr, 0); - buf = kmalloc(maxp, GFP_KERNEL); diff --git a/target/linux/brcm2708/patches-4.19/950-0298-staging-bcm2835-camera-Correct-ctrl-min-max-step-def.patch b/target/linux/brcm2708/patches-4.19/950-0298-staging-bcm2835-camera-Correct-ctrl-min-max-step-def.patch new file mode 100644 index 0000000000..c1e5bb355b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0298-staging-bcm2835-camera-Correct-ctrl-min-max-step-def.patch @@ -0,0 +1,58 @@ +From 8c420772ef0f15ebbc3f13ebcc340d34bbdfad71 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 24 Jan 2019 16:20:38 +0000 +Subject: [PATCH] staging: bcm2835-camera: Correct ctrl + min/max/step/def to 64bit + +The V4L2 control API was expanded to take 64 bit values in commit +0ba2aeb6dab (Apr 16 2014), but as this driver wasn't in the mainline +kernel at that point this was overlooked. + +Update to use 64 bit values. This also fixes a couple of warnings +in 64 bit builds. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-camera/controls.c | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -78,10 +78,10 @@ struct bm2835_mmal_v4l2_ctrl { + /* control minimum value or + * mask for MMAL_CONTROL_TYPE_STD_MENU + */ +- s32 min; +- s32 max; /* maximum value of control */ +- s32 def; /* default value of control */ +- s32 step; /* step size of the control */ ++ s64 min; ++ s64 max; /* maximum value of control */ ++ s64 def; /* default value of control */ ++ u64 step; /* step size of the control */ + const s64 *imenu; /* integer menu array */ + u32 mmal_id; /* mmal parameter id */ + bm2835_mmal_v4l2_ctrl_cb *setter; +@@ -1244,7 +1244,7 @@ int bm2835_mmal_init_controls(struct bm2 + + case MMAL_CONTROL_TYPE_STD_MENU: + { +- int mask = ctrl->min; ++ u64 mask = ctrl->min; + + if (ctrl->id == V4L2_CID_SCENE_MODE) { + /* Special handling to work out the mask +@@ -1254,11 +1254,11 @@ int bm2835_mmal_init_controls(struct bm2 + */ + int i; + +- mask = 1 << V4L2_SCENE_MODE_NONE; ++ mask = BIT(V4L2_SCENE_MODE_NONE); + for (i = 0; + i < ARRAY_SIZE(scene_configs); + i++) { +- mask |= 1 << scene_configs[i].v4l2_scene; ++ mask |= BIT(scene_configs[i].v4l2_scene); + } + mask = ~mask; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0299-ASoC-Add-support-for-AudioSense-Pi-add-on-soundcard.patch b/target/linux/brcm2708/patches-4.19/950-0299-ASoC-Add-support-for-AudioSense-Pi-add-on-soundcard.patch deleted file mode 100644 index 400e38cba7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0299-ASoC-Add-support-for-AudioSense-Pi-add-on-soundcard.patch +++ /dev/null @@ -1,320 +0,0 @@ -From 5705594ae56861cb63e7a3de1854e29ad1e830fd Mon Sep 17 00:00:00 2001 -From: b-ak -Date: Thu, 3 Jan 2019 00:01:08 +0530 -Subject: [PATCH 299/806] ASoC: Add support for AudioSense-Pi add-on soundcard - -AudioSense-Pi is a RPi HAT based on a TI's TLV320AIC32x4 stereo codec - -This hardware provides multiple audio I/O capabilities to the RPi. -The codec connects to the RPi's SoC through the I2S Bus. - -The following devices can be connected through a 3.5mm jack - 1. Line-In: Plain old audio in from mobile phones, PCs, etc., - 2. Mic-In: Connect a microphone - 3. Line-Out: Connect the output to a speaker - 4. Headphones: Connect a Headphone w or w/o microphones - -Multiple Inputs: - It supports the following combinations - 1. Two stereo Line-Inputs and a microphone - 2. One stereo Line-Input and two microphones - 3. Two stereo Line-Inputs, a microphone and - one mono line-input (with h/w hack) - 4. One stereo Line-Input, two microphones and - one mono line-input (with h/w hack) - -Multiple Outputs: - Audio output can be routed to the headphones or - speakers (with additional hardware) - -Signed-off-by: b-ak ---- - sound/soc/bcm/Kconfig | 7 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/audiosense-pi.c | 246 ++++++++++++++++++++++++++++++++++ - 3 files changed, 255 insertions(+) - create mode 100644 sound/soc/bcm/audiosense-pi.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -137,6 +137,13 @@ config SND_AUDIOINJECTOR_OCTO_SOUNDCARD - help - Say Y or M if you want to add support for audioinjector.net octo add on - -+config SND_AUDIOSENSE_PI -+ tristate "Support for AudioSense Add-On Soundcard" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_TLV320AIC32X4_I2C -+ help -+ Say Y or M if you want to add support for tlv320aic32x4 add-on -+ - config SND_DIGIDAC1_SOUNDCARD - tristate "Support for Red Rocks Audio DigiDAC1" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -20,6 +20,7 @@ snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o - snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o - snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o -+snd-soc-audiosense-pi-objs := audiosense-pi.o - snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o - snd-soc-dionaudio-loco-objs := dionaudio_loco.o - snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o -@@ -41,6 +42,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o - obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o - obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o -+obj-$(CONFIG_SND_AUDIOSENSE_PI) += snd-soc-audiosense-pi.o - obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o - obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o - obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o ---- /dev/null -+++ b/sound/soc/bcm/audiosense-pi.c -@@ -0,0 +1,246 @@ -+/* -+ * ASoC Driver for AudioSense add on soundcard -+ * Author: -+ * Bhargav A K -+ * Copyright 2017 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include "../codecs/tlv320aic32x4.h" -+ -+#define AIC32X4_SYSCLK_XTAL 0x00 -+ -+/* -+ * Setup Codec Sample Rates and Channels -+ * Supported Rates: -+ * 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, -+ */ -+static const unsigned int audiosense_pi_rate[] = { -+ 48000, -+}; -+ -+static struct snd_pcm_hw_constraint_list audiosense_constraints_rates = { -+ .list = audiosense_pi_rate, -+ .count = ARRAY_SIZE(audiosense_pi_rate), -+}; -+ -+static const unsigned int audiosense_pi_channels[] = { -+ 2, -+}; -+ -+static struct snd_pcm_hw_constraint_list audiosense_constraints_ch = { -+ .count = ARRAY_SIZE(audiosense_pi_channels), -+ .list = audiosense_pi_channels, -+ .mask = 0, -+}; -+ -+/* Setup DAPM widgets and paths */ -+static const struct snd_soc_dapm_widget audiosense_pi_dapm_widgets[] = { -+ SND_SOC_DAPM_HP("Headphone Jack", NULL), -+ SND_SOC_DAPM_LINE("Line Out", NULL), -+ SND_SOC_DAPM_LINE("Line In", NULL), -+ SND_SOC_DAPM_INPUT("CM_L"), -+ SND_SOC_DAPM_INPUT("CM_R"), -+}; -+ -+static const struct snd_soc_dapm_route audiosense_pi_audio_map[] = { -+ /* Line Inputs are connected to -+ * (IN1_L | IN1_R) -+ * (IN2_L | IN2_R) -+ * (IN3_L | IN3_R) -+ */ -+ {"IN1_L", NULL, "Line In"}, -+ {"IN1_R", NULL, "Line In"}, -+ {"IN2_L", NULL, "Line In"}, -+ {"IN2_R", NULL, "Line In"}, -+ {"IN3_L", NULL, "Line In"}, -+ {"IN3_R", NULL, "Line In"}, -+ -+ /* Mic is connected to IN2_L and IN2_R */ -+ {"Left ADC", NULL, "Mic Bias"}, -+ {"Right ADC", NULL, "Mic Bias"}, -+ -+ /* Headphone connected to HPL, HPR */ -+ {"Headphone Jack", NULL, "HPL"}, -+ {"Headphone Jack", NULL, "HPR"}, -+ -+ /* Speakers connected to LOL and LOR */ -+ {"Line Out", NULL, "LOL"}, -+ {"Line Out", NULL, "LOR"}, -+}; -+ -+static int audiosense_pi_card_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ /* TODO: init of the codec specific dapm data, ignore suspend/resume */ -+ struct snd_soc_component *component = rtd->codec_dai->component; -+ -+ snd_soc_component_update_bits(component, AIC32X4_MICBIAS, 0x78, -+ AIC32X4_MICBIAS_LDOIN | -+ AIC32X4_MICBIAS_2075V); -+ snd_soc_component_update_bits(component, AIC32X4_PWRCFG, 0x08, -+ AIC32X4_AVDDWEAKDISABLE); -+ snd_soc_component_update_bits(component, AIC32X4_LDOCTL, 0x01, -+ AIC32X4_LDOCTLEN); -+ -+ return 0; -+} -+ -+static int audiosense_pi_card_hw_params( -+ struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ int ret = 0; -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ -+ /* Set the codec system clock, there is a 12 MHz XTAL on the board */ -+ ret = snd_soc_dai_set_sysclk(codec_dai, AIC32X4_SYSCLK_XTAL, -+ 12000000, SND_SOC_CLOCK_IN); -+ if (ret) { -+ dev_err(rtd->card->dev, -+ "could not set codec driver clock params\n"); -+ return ret; -+ } -+ return 0; -+} -+ -+static int audiosense_pi_card_startup(struct snd_pcm_substream *substream) -+{ -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ -+ /* -+ * Set codec to 48Khz Sampling, Stereo I/O and 16 bit audio -+ */ -+ runtime->hw.channels_max = 2; -+ snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, -+ &audiosense_constraints_ch); -+ -+ runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE; -+ snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16); -+ -+ -+ snd_pcm_hw_constraint_list(substream->runtime, 0, -+ SNDRV_PCM_HW_PARAM_RATE, -+ &audiosense_constraints_rates); -+ return 0; -+} -+ -+static struct snd_soc_ops audiosense_pi_card_ops = { -+ .startup = audiosense_pi_card_startup, -+ .hw_params = audiosense_pi_card_hw_params, -+}; -+ -+static struct snd_soc_dai_link audiosense_pi_card_dai[] = { -+ { -+ .name = "TLV320AIC3204 Audio", -+ .stream_name = "TLV320AIC3204 Hifi Audio", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "tlv320aic32x4-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "tlv320aic32x4.1-0018", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ .ops = &audiosense_pi_card_ops, -+ .init = audiosense_pi_card_init, -+ }, -+}; -+ -+static struct snd_soc_card audiosense_pi_card = { -+ .name = "audiosense-pi", -+ .driver_name = "audiosense-pi", -+ .dai_link = audiosense_pi_card_dai, -+ .owner = THIS_MODULE, -+ .num_links = ARRAY_SIZE(audiosense_pi_card_dai), -+ .dapm_widgets = audiosense_pi_dapm_widgets, -+ .num_dapm_widgets = ARRAY_SIZE(audiosense_pi_dapm_widgets), -+ .dapm_routes = audiosense_pi_audio_map, -+ .num_dapm_routes = ARRAY_SIZE(audiosense_pi_audio_map), -+}; -+ -+static int audiosense_pi_card_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ struct snd_soc_card *card = &audiosense_pi_card; -+ struct snd_soc_dai_link *dai = &audiosense_pi_card_dai[0]; -+ struct device_node *i2s_node = pdev->dev.of_node; -+ -+ card->dev = &pdev->dev; -+ -+ if (!dai) { -+ dev_err(&pdev->dev, "DAI not found. Missing or Invalid\n"); -+ return -EINVAL; -+ } -+ -+ i2s_node = of_parse_phandle(pdev->dev.of_node, "i2s-controller", 0); -+ if (!i2s_node) { -+ dev_err(&pdev->dev, -+ "Property 'i2s-controller' missing or invalid\n"); -+ return -EINVAL; -+ } -+ -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ -+ of_node_put(i2s_node); -+ -+ ret = snd_soc_register_card(card); -+ if (ret && ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int audiosense_pi_card_remove(struct platform_device *pdev) -+{ -+ struct snd_soc_card *card = platform_get_drvdata(pdev); -+ -+ return snd_soc_unregister_card(card); -+ -+} -+ -+static const struct of_device_id audiosense_pi_card_of_match[] = { -+ { .compatible = "as,audiosense-pi", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, audiosense_pi_card_of_match); -+ -+static struct platform_driver audiosense_pi_card_driver = { -+ .driver = { -+ .name = "audiosense-snd-card", -+ .owner = THIS_MODULE, -+ .of_match_table = audiosense_pi_card_of_match, -+ }, -+ .probe = audiosense_pi_card_probe, -+ .remove = audiosense_pi_card_remove, -+}; -+ -+module_platform_driver(audiosense_pi_card_driver); -+ -+MODULE_AUTHOR("Bhargav AK "); -+MODULE_DESCRIPTION("ASoC Driver for TLV320AIC3204 Audio"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:audiosense-pi"); -+ diff --git a/target/linux/brcm2708/patches-4.19/950-0299-staging-bcm2835-codec-variable-vb2-may-be-used-unini.patch b/target/linux/brcm2708/patches-4.19/950-0299-staging-bcm2835-codec-variable-vb2-may-be-used-unini.patch new file mode 100644 index 0000000000..24a332fa60 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0299-staging-bcm2835-codec-variable-vb2-may-be-used-unini.patch @@ -0,0 +1,37 @@ +From 8920ce80058cfa3d18dc8bc7535119e9986dbad7 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 24 Jan 2019 16:40:01 +0000 +Subject: [PATCH] staging: bcm2835-codec: variable vb2 may be used + uninitialised + +In op_buffer_cb, the failure path checked whether there was +an associated vb2 buffer before the variable vb2 had been +assigned. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -634,6 +634,9 @@ static void op_buffer_cb(struct vchiq_mm + __func__, status, mmal_buf, mmal_buf->length, + mmal_buf->mmal_flags, mmal_buf->pts); + ++ buf = container_of(mmal_buf, struct m2m_mmal_buffer, mmal); ++ vb2 = &buf->m2m.vb; ++ + if (status) { + /* error in transfer */ + if (vb2) { +@@ -658,9 +661,6 @@ static void op_buffer_cb(struct vchiq_mm + return; + } + +- buf = container_of(mmal_buf, struct m2m_mmal_buffer, mmal); +- vb2 = &buf->m2m.vb; +- + v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: length %lu, flags %x, idx %u\n", + __func__, mmal_buf->length, mmal_buf->mmal_flags, + vb2->vb2_buf.index); diff --git a/target/linux/brcm2708/patches-4.19/950-0300-BCM270X-Adding-device-tree-support-for-AudioSense-Pi.patch b/target/linux/brcm2708/patches-4.19/950-0300-BCM270X-Adding-device-tree-support-for-AudioSense-Pi.patch deleted file mode 100644 index 4f64bd207c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0300-BCM270X-Adding-device-tree-support-for-AudioSense-Pi.patch +++ /dev/null @@ -1,135 +0,0 @@ -From 0d2a0f4f4c00c958fb6e7a2673adbe51c2a932f2 Mon Sep 17 00:00:00 2001 -From: b-ak -Date: Thu, 3 Jan 2019 00:29:14 +0530 -Subject: [PATCH 300/806] BCM270X: Adding device tree support for AudioSense-Pi - add-on soundcard - -Device tree overlay for AudioSense-Pi card. - -To enable support for the hardware add the following -line to the RPi /boot/config.txt: - - dtoverlay=audiosense-pi - -More documentation @ arch/arm/boot/dts/overlays/README - -Signed-off-by: b-ak ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 8 ++ - .../dts/overlays/audiosense-pi-overlay.dts | 82 +++++++++++++++++++ - 3 files changed, 91 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -20,6 +20,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - audioinjector-addons.dtbo \ - audioinjector-ultra.dtbo \ - audioinjector-wm8731-audio.dtbo \ -+ audiosense-pi.dtbo \ - audremap.dtbo \ - balena-fin.dtbo \ - bmp085_i2c-sensor.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -453,6 +453,14 @@ Load: dtoverlay=audioinjector-wm8731-a - Params: - - -+Name: audiosense-pi -+Info: Configures the audiosense-pi add on soundcard -+ For more information refer to -+ https://gitlab.com/kakar0t/audiosense-pi -+Load: dtoverlay=audiosense-pi -+Params: -+ -+ - Name: audremap - Info: Switches PWM sound output to pins 12 (Right) & 13 (Left) - Load: dtoverlay=audremap,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts -@@ -0,0 +1,82 @@ -+// Definitions for audiosense add on soundcard -+/dts-v1/; -+/plugin/; -+#include -+#include -+ -+/ { -+ compatible = "brcm,bcm2837", "brcm,bcm2836", "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ codec_reg_1v8: codec-reg-1v8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "tlv320aic3204_1v8"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ codec_rst: codec-rst { -+ brcm,pins = <26>; -+ brcm,function = ; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ /* audio external oscillator */ -+ codec_osc: codec_osc { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <12000000>; /* 12 MHz */ -+ }; -+ -+ codec: tlv320aic32x4@18 { -+ #sound-dai-cells = <0>; -+ compatible = "ti,tlv320aic32x4"; -+ reg = <0x18>; -+ -+ clocks = <&codec_osc>; -+ clock-names = "mclk"; -+ -+ iov-supply = <&vdd_3v3_reg>; -+ ldoin-supply = <&vdd_3v3_reg>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ reset-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; -+ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "as,audiosense-pi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0300-staging-bcm2835-codec-Fix-potentially-uninitialised-.patch b/target/linux/brcm2708/patches-4.19/950-0300-staging-bcm2835-codec-Fix-potentially-uninitialised-.patch new file mode 100644 index 0000000000..c8e3e221ce --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0300-staging-bcm2835-codec-Fix-potentially-uninitialised-.patch @@ -0,0 +1,25 @@ +From 7e3cada9dae5d030256605a28df9537b26e776a8 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 24 Jan 2019 16:36:19 +0000 +Subject: [PATCH] staging: bcm2835-codec: Fix potentially uninitialised + vars + +src_m2m_buf and dst_m2m_buf were printed in log messages +when there are code paths that don't initialise them. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -743,7 +743,7 @@ static void device_run(void *priv) + struct bcm2835_codec_ctx *ctx = priv; + struct bcm2835_codec_dev *dev = ctx->dev; + struct vb2_v4l2_buffer *src_buf, *dst_buf; +- struct m2m_mmal_buffer *src_m2m_buf, *dst_m2m_buf; ++ struct m2m_mmal_buffer *src_m2m_buf = NULL, *dst_m2m_buf = NULL; + struct v4l2_m2m_buffer *m2m; + int ret; + diff --git a/target/linux/brcm2708/patches-4.19/950-0301-video-bcm2708_fb-Add-compat_ioctl-support.patch b/target/linux/brcm2708/patches-4.19/950-0301-video-bcm2708_fb-Add-compat_ioctl-support.patch new file mode 100644 index 0000000000..eb53480080 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0301-video-bcm2708_fb-Add-compat_ioctl-support.patch @@ -0,0 +1,154 @@ +From b5bd7b621f6ab2f29e9f18ec2a2720d702b9727c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 25 Jan 2019 17:12:54 +0000 +Subject: [PATCH] video: bcm2708_fb: Add compat_ioctl support. + +When using a 64 bit kernel with 32 bit userspace we need +compat ioctl handling for FBIODMACOPY as one of the +parameters is a pointer. + +Signed-off-by: Dave Stevenson +--- + drivers/video/fbdev/bcm2708_fb.c | 87 ++++++++++++++++++++++++-------- + 1 file changed, 66 insertions(+), 21 deletions(-) + +--- a/drivers/video/fbdev/bcm2708_fb.c ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -482,9 +482,8 @@ static void dma_memcpy(struct bcm2708_fb + /* cache coherent but non-allocating in L1 and L2 */ + #define INTALIAS_L1L2_NONALLOCATING(x) (((x)&~0xc0000000)|0x80000000) + +-static long vc_mem_copy(struct bcm2708_fb *fb, unsigned long arg) ++static long vc_mem_copy(struct bcm2708_fb *fb, struct fb_dmacopy *ioparam) + { +- struct fb_dmacopy ioparam; + size_t size = PAGE_SIZE; + u32 *buf = NULL; + dma_addr_t bus_addr; +@@ -497,26 +496,16 @@ static long vc_mem_copy(struct bcm2708_f + goto out; + } + +- /* Get the parameter data. +- */ +- if (copy_from_user +- (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { +- pr_err("[%s]: failed to copy-from-user\n", +- __func__); +- rc = -EFAULT; +- goto out; +- } +- +- if (fb->gpu.base == 0 || fb->gpu.length == 0) { ++ if (!fb->gpu.base || !fb->gpu.length) { + pr_err("[%s]: Unable to determine gpu memory (%x,%x)\n", + __func__, fb->gpu.base, fb->gpu.length); + return -EFAULT; + } + +- if (INTALIAS_NORMAL(ioparam.src) < fb->gpu.base || +- INTALIAS_NORMAL(ioparam.src) >= fb->gpu.base + fb->gpu.length) { ++ if (INTALIAS_NORMAL(ioparam->src) < fb->gpu.base || ++ INTALIAS_NORMAL(ioparam->src) >= fb->gpu.base + fb->gpu.length) { + pr_err("[%s]: Invalid memory access %x (%x-%x)", __func__, +- INTALIAS_NORMAL(ioparam.src), fb->gpu.base, ++ INTALIAS_NORMAL(ioparam->src), fb->gpu.base, + fb->gpu.base + fb->gpu.length); + return -EFAULT; + } +@@ -530,11 +519,11 @@ static long vc_mem_copy(struct bcm2708_f + goto out; + } + +- for (offset = 0; offset < ioparam.length; offset += size) { +- size_t remaining = ioparam.length - offset; ++ for (offset = 0; offset < ioparam->length; offset += size) { ++ size_t remaining = ioparam->length - offset; + size_t s = min(size, remaining); +- unsigned char *p = (unsigned char *)ioparam.src + offset; +- unsigned char *q = (unsigned char *)ioparam.dst + offset; ++ u8 *p = (u8 *)((uintptr_t)ioparam->src + offset); ++ u8 *q = (u8 *)ioparam->dst + offset; + + dma_memcpy(fb, bus_addr, + INTALIAS_L1L2_NONALLOCATING((dma_addr_t)p), size); +@@ -566,8 +555,19 @@ static int bcm2708_ioctl(struct fb_info + &dummy, sizeof(dummy)); + break; + case FBIODMACOPY: +- ret = vc_mem_copy(fb, arg); ++ { ++ struct fb_dmacopy ioparam; ++ /* Get the parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam))) { ++ pr_err("[%s]: failed to copy-from-user\n", __func__); ++ ret = -EFAULT; ++ break; ++ } ++ ret = vc_mem_copy(fb, &ioparam); + break; ++ } + default: + dev_dbg(info->device, "Unknown ioctl 0x%x\n", cmd); + return -ENOTTY; +@@ -578,6 +578,48 @@ static int bcm2708_ioctl(struct fb_info + + return ret; + } ++ ++#ifdef CONFIG_COMPAT ++struct fb_dmacopy32 { ++ compat_uptr_t dst; ++ __u32 src; ++ __u32 length; ++}; ++ ++#define FBIODMACOPY32 _IOW('z', 0x22, struct fb_dmacopy32) ++ ++static int bcm2708_compat_ioctl(struct fb_info *info, unsigned int cmd, ++ unsigned long arg) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ int ret; ++ ++ switch (cmd) { ++ case FBIODMACOPY32: ++ { ++ struct fb_dmacopy32 param32; ++ struct fb_dmacopy param; ++ /* Get the parameter data. ++ */ ++ if (copy_from_user(¶m32, (void *)arg, sizeof(param32))) { ++ pr_err("[%s]: failed to copy-from-user\n", __func__); ++ ret = -EFAULT; ++ break; ++ } ++ param.dst = compat_ptr(param32.dst); ++ param.src = param32.src; ++ param.length = param32.length; ++ ret = vc_mem_copy(fb, ¶m); ++ break; ++ } ++ default: ++ ret = bcm2708_ioctl(info, cmd, arg); ++ break; ++ } ++ return ret; ++} ++#endif ++ + static void bcm2708_fb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) + { +@@ -768,6 +810,9 @@ static struct fb_ops bcm2708_fb_ops = { + .fb_imageblit = bcm2708_fb_imageblit, + .fb_pan_display = bcm2708_fb_pan_display, + .fb_ioctl = bcm2708_ioctl, ++#ifdef CONFIG_COMPAT ++ .fb_compat_ioctl = bcm2708_compat_ioctl, ++#endif + }; + + static int bcm2708_fb_register(struct bcm2708_fb *fb) diff --git a/target/linux/brcm2708/patches-4.19/950-0302-video-bcm2708_fb-Fix-warnings-on-64-bit-builds.patch b/target/linux/brcm2708/patches-4.19/950-0302-video-bcm2708_fb-Fix-warnings-on-64-bit-builds.patch new file mode 100644 index 0000000000..3c6dc09f09 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0302-video-bcm2708_fb-Fix-warnings-on-64-bit-builds.patch @@ -0,0 +1,46 @@ +From ca128febc6abc040d747ddc0808fd203c135668e Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 25 Jan 2019 17:11:39 +0000 +Subject: [PATCH] video: bcm2708_fb: Fix warnings on 64 bit builds + +Fix up logging lines where the wrong format specifiers were +being used. + +Signed-off-by: Dave Stevenson +--- + drivers/video/fbdev/bcm2708_fb.c | 10 ++++------ + 1 file changed, 4 insertions(+), 6 deletions(-) + +--- a/drivers/video/fbdev/bcm2708_fb.c ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -513,8 +513,8 @@ static long vc_mem_copy(struct bcm2708_f + buf = dma_alloc_coherent(fb->fb.device, PAGE_ALIGN(size), &bus_addr, + GFP_ATOMIC); + if (!buf) { +- pr_err("[%s]: failed to dma_alloc_coherent(%d)\n", +- __func__, size); ++ pr_err("[%s]: failed to dma_alloc_coherent(%zd)\n", __func__, ++ size); + rc = -ENOMEM; + goto out; + } +@@ -910,8 +910,7 @@ static int bcm2708_fb_probe(struct platf + goto free_fb; + } + +- pr_info("BCM2708FB: allocated DMA memory %08x\n", +- fb->cb_handle); ++ pr_info("BCM2708FB: allocated DMA memory %pad\n", &fb->cb_handle); + + ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_BULK, + &fb->dma_chan_base, &fb->dma_irq); +@@ -929,8 +928,7 @@ static int bcm2708_fb_probe(struct platf + } + + +- pr_info("BCM2708FB: allocated DMA channel %d @ %p\n", +- fb->dma_chan, fb->dma_chan_base); ++ pr_info("BCM2708FB: allocated DMA channel %d\n", fb->dma_chan); + + fb->dev = dev; + fb->fb.device = &dev->dev; diff --git a/target/linux/brcm2708/patches-4.19/950-0303-overlays-sdio-Add-enhanced-1-bit-support.patch b/target/linux/brcm2708/patches-4.19/950-0303-overlays-sdio-Add-enhanced-1-bit-support.patch deleted file mode 100644 index 35ebd59053..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0303-overlays-sdio-Add-enhanced-1-bit-support.patch +++ /dev/null @@ -1,107 +0,0 @@ -From 788109b357ddb30a95be72ce46dc22e2335131af Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 10 Jan 2019 15:27:56 +0000 -Subject: [PATCH 303/806] overlays: sdio: Add enhanced 1-bit support - -"dtoverlay=sdio,bus_width=1,gpios_22_25" is equivalent to the sdio-1bit -overlay, which is now deprecated. - -"dtoverlay=sdio,bus_width=1,gpios_34_37" enables 1-bit mode on GPIOs 34-37. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 24 +++++++++++---------- - arch/arm/boot/dts/overlays/sdio-overlay.dts | 20 ++++++++++++++++- - 2 files changed, 32 insertions(+), 12 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -479,8 +479,7 @@ Params: - - Name: bmp085_i2c-sensor - Info: This overlay is now deprecated - see i2c-sensor --Load: dtoverlay=bmp085_i2c-sensor --Params: -+Load: - - - Name: dht11 -@@ -1737,7 +1736,8 @@ Params: overclock_50 Clock (i - - Name: sdio - Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, -- and enables SDIO via GPIOs 22-27. -+ and enables SDIO via GPIOs 22-27. An example of use in 1-bit mode is -+ "dtoverlay=sdio,bus_width=1,gpios_22_25" - Load: dtoverlay=sdio,= - Params: sdio_overclock SDIO Clock (in MHz) to use when the MMC - framework requests 50MHz -@@ -1747,16 +1747,18 @@ Params: sdio_overclock SDIO Clo - - bus_width Set the SDIO host bus width (default 4 bits) - -+ gpios_22_25 Select GPIOs 22-25 for 1-bit mode. Must be used -+ with bus_width=1. This replaces the sdio-1bit -+ overlay, which is now deprecated. - --Name: sdio-1bit --Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, -- and enables 1-bit SDIO via GPIOs 22-25. --Load: dtoverlay=sdio-1bit,= --Params: sdio_overclock SDIO Clock (in MHz) to use when the MMC -- framework requests 50MHz -+ gpios_34_37 Select GPIOs 34-37 for 1-bit mode. Must be used -+ with bus_width=1. - -- poll_once Disable SDIO-device polling every second -- (default on: polling once at boot-time) -+ -+Name: sdio-1bit -+Info: This overlay is now deprecated. Use -+ "dtoverlay=sdio,bus_width=1,gpios_22_25" instead. -+Load: - - - Name: sdtweak ---- a/arch/arm/boot/dts/overlays/sdio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts -@@ -32,7 +32,7 @@ - pinctrl-names = "default"; - pinctrl-0 = <&sdio_ovl_pins>; - non-removable; -- bus-width = <1>; -+ bus-width = <4>; - }; - }; - }; -@@ -49,6 +49,22 @@ - }; - - fragment@3 { -+ target = <&sdio_ovl_pins>; -+ __dormant__ { -+ brcm,pins = <22 23 24 25>; -+ brcm,pull = <0 2 2 2>; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&sdio_ovl_pins>; -+ __dormant__ { -+ brcm,pins = <34 35 36 37>; -+ brcm,pull = <0 2 2 2>; -+ }; -+ }; -+ -+ fragment@6 { - target-path = "/aliases"; - __overlay__ { - mmc1 = "/soc/sdio@7e300000"; -@@ -59,5 +75,7 @@ - poll_once = <&sdio_ovl>,"non-removable?"; - bus_width = <&sdio_ovl>,"bus-width:0"; - sdio_overclock = <&sdio_ovl>,"brcm,overclock-50:0"; -+ gpios_22_25 = <0>,"=3"; -+ gpios_34_37 = <0>,"=4"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0303-video-bcm2708_fb-Clean-up-coding-style-issues.patch b/target/linux/brcm2708/patches-4.19/950-0303-video-bcm2708_fb-Clean-up-coding-style-issues.patch new file mode 100644 index 0000000000..43bb8cee3a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0303-video-bcm2708_fb-Clean-up-coding-style-issues.patch @@ -0,0 +1,275 @@ +From 47f7687efaf3873fe8c0e47653515e9ada1b86da Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 25 Jan 2019 17:32:54 +0000 +Subject: [PATCH] video: bcm2708_fb: Clean up coding style issues + +Now checkpatch clean except for 2 long lines, missing +SPDX header, and no DT documentation. + +Signed-off-by: Dave Stevenson +--- + drivers/video/fbdev/bcm2708_fb.c | 96 ++++++++++++++------------------ + 1 file changed, 42 insertions(+), 54 deletions(-) + +--- a/drivers/video/fbdev/bcm2708_fb.c ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -41,7 +41,7 @@ + #define MODULE_NAME "bcm2708_fb" + + #ifdef BCM2708_FB_DEBUG +-#define print_debug(fmt, ...) pr_debug("%s:%s:%d: "fmt, \ ++#define print_debug(fmt, ...) pr_debug("%s:%s:%d: " fmt, \ + MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__) + #else + #define print_debug(fmt, ...) +@@ -57,7 +57,7 @@ static int fbheight = 480; /* module par + static int fbdepth = 32; /* module parameter */ + static int fbswap; /* module parameter */ + +-static u32 dma_busy_wait_threshold = 1<<15; ++static u32 dma_busy_wait_threshold = 1 << 15; + module_param(dma_busy_wait_threshold, int, 0644); + MODULE_PARM_DESC(dma_busy_wait_threshold, "Busy-wait for DMA completion below this area"); + +@@ -132,8 +132,8 @@ static int bcm2708_fb_debugfs_init(struc + fb->stats.regset.nregs = ARRAY_SIZE(stats_registers); + fb->stats.regset.base = &fb->stats; + +- if (!debugfs_create_regset32( +- "stats", 0444, fb->debugfs_dir, &fb->stats.regset)) { ++ if (!debugfs_create_regset32("stats", 0444, fb->debugfs_dir, ++ &fb->stats.regset)) { + pr_warn("%s: could not create statistics registers\n", + __func__); + goto fail; +@@ -223,25 +223,22 @@ static int bcm2708_fb_check_var(struct f + { + /* info input, var output */ + print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", +- __func__, +- info, +- info->var.xres, info->var.yres, info->var.xres_virtual, +- info->var.yres_virtual, (int)info->screen_size, +- info->var.bits_per_pixel); +- print_debug("%s(%p) %dx%d (%dx%d), %d\n", __func__, var, +- var->xres, var->yres, var->xres_virtual, var->yres_virtual, +- var->bits_per_pixel); ++ __func__, info, info->var.xres, info->var.yres, ++ info->var.xres_virtual, info->var.yres_virtual, ++ (int)info->screen_size, info->var.bits_per_pixel); ++ print_debug("%s(%p) %dx%d (%dx%d), %d\n", __func__, var, var->xres, ++ var->yres, var->xres_virtual, var->yres_virtual, ++ var->bits_per_pixel); + + if (!var->bits_per_pixel) + var->bits_per_pixel = 16; + + if (bcm2708_fb_set_bitfields(var) != 0) { + pr_err("%s: invalid bits_per_pixel %d\n", __func__, +- var->bits_per_pixel); ++ var->bits_per_pixel); + return -EINVAL; + } + +- + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + /* use highest possible virtual resolution */ +@@ -249,7 +246,7 @@ static int bcm2708_fb_check_var(struct f + var->yres_virtual = 480; + + pr_err("%s: virtual resolution set to maximum of %dx%d\n", +- __func__, var->xres_virtual, var->yres_virtual); ++ __func__, var->xres_virtual, var->yres_virtual); + } + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; +@@ -294,9 +291,9 @@ static int bcm2708_fb_set_par(struct fb_ + int ret; + + print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", __func__, info, +- info->var.xres, info->var.yres, info->var.xres_virtual, +- info->var.yres_virtual, (int)info->screen_size, +- info->var.bits_per_pixel); ++ info->var.xres, info->var.yres, info->var.xres_virtual, ++ info->var.yres_virtual, (int)info->screen_size, ++ info->var.bits_per_pixel); + + ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); + if (ret) { +@@ -328,12 +325,10 @@ static int bcm2708_fb_set_par(struct fb_ + return -ENOMEM; + } + +- print_debug( +- "%s: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d\n", +- __func__, +- (void *)fb->fb.screen_base, (void *)fb->fb_bus_address, +- fbinfo.xres, fbinfo.yres, fbinfo.bpp, +- fbinfo.pitch, (int)fb->fb.screen_size); ++ print_debug("%s: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d\n", ++ __func__, (void *)fb->fb.screen_base, ++ (void *)fb->fb_bus_address, fbinfo.xres, fbinfo.yres, ++ fbinfo.bpp, fbinfo.pitch, (int)fb->fb.screen_size); + + return 0; + } +@@ -345,7 +340,6 @@ static inline u32 convert_bitfield(int v + return (val >> (16 - bf->length) & mask) << bf->offset; + } + +- + static int bcm2708_fb_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int transp, struct fb_info *info) +@@ -379,11 +373,11 @@ static int bcm2708_fb_setcolreg(unsigned + packet->offset = 0; + packet->length = regno + 1; + memcpy(packet->cmap, fb->gpu_cmap, +- sizeof(packet->cmap)); ++ sizeof(packet->cmap)); + ret = rpi_firmware_property(fb->fw, +- RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE, +- packet, +- (2 + packet->length) * sizeof(u32)); ++ RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE, ++ packet, ++ (2 + packet->length) * sizeof(u32)); + if (ret || packet->offset) + dev_err(info->device, + "Failed to set palette (%d,%u)\n", +@@ -392,9 +386,9 @@ static int bcm2708_fb_setcolreg(unsigned + } + } else if (regno < 16) { + fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) | +- convert_bitfield(blue, &fb->fb.var.blue) | +- convert_bitfield(green, &fb->fb.var.green) | +- convert_bitfield(red, &fb->fb.var.red); ++ convert_bitfield(blue, &fb->fb.var.blue) | ++ convert_bitfield(green, &fb->fb.var.green) | ++ convert_bitfield(red, &fb->fb.var.red); + } + return regno > 255; + } +@@ -437,8 +431,8 @@ static int bcm2708_fb_pan_display(struct + info->var.yoffset = var->yoffset; + result = bcm2708_fb_set_par(info); + if (result != 0) +- pr_err("%s(%d,%d) returns=%d\n", __func__, +- var->xoffset, var->yoffset, result); ++ pr_err("%s(%d,%d) returns=%d\n", __func__, var->xoffset, ++ var->yoffset, result); + return result; + } + +@@ -468,9 +462,8 @@ static void dma_memcpy(struct bcm2708_fb + cb->info |= BCM2708_DMA_INT_EN; + bcm_dma_start(fb->dma_chan_base, fb->cb_handle); + while (bcm_dma_is_busy(dma_chan)) { +- wait_event_interruptible( +- fb->dma_waitq, +- !bcm_dma_is_busy(dma_chan)); ++ wait_event_interruptible(fb->dma_waitq, ++ !bcm_dma_is_busy(dma_chan)); + } + fb->stats.dma_irqs++; + } +@@ -478,9 +471,9 @@ static void dma_memcpy(struct bcm2708_fb + } + + /* address with no aliases */ +-#define INTALIAS_NORMAL(x) ((x)&~0xc0000000) ++#define INTALIAS_NORMAL(x) ((x) & ~0xc0000000) + /* cache coherent but non-allocating in L1 and L2 */ +-#define INTALIAS_L1L2_NONALLOCATING(x) (((x)&~0xc0000000)|0x80000000) ++#define INTALIAS_L1L2_NONALLOCATING(x) (((x) & ~0xc0000000) | 0x80000000) + + static long vc_mem_copy(struct bcm2708_fb *fb, struct fb_dmacopy *ioparam) + { +@@ -498,15 +491,15 @@ static long vc_mem_copy(struct bcm2708_f + + if (!fb->gpu.base || !fb->gpu.length) { + pr_err("[%s]: Unable to determine gpu memory (%x,%x)\n", +- __func__, fb->gpu.base, fb->gpu.length); ++ __func__, fb->gpu.base, fb->gpu.length); + return -EFAULT; + } + + if (INTALIAS_NORMAL(ioparam->src) < fb->gpu.base || + INTALIAS_NORMAL(ioparam->src) >= fb->gpu.base + fb->gpu.length) { + pr_err("[%s]: Invalid memory access %x (%x-%x)", __func__, +- INTALIAS_NORMAL(ioparam->src), fb->gpu.base, +- fb->gpu.base + fb->gpu.length); ++ INTALIAS_NORMAL(ioparam->src), fb->gpu.base, ++ fb->gpu.base + fb->gpu.length); + return -EFAULT; + } + +@@ -528,8 +521,7 @@ static long vc_mem_copy(struct bcm2708_f + dma_memcpy(fb, bus_addr, + INTALIAS_L1L2_NONALLOCATING((dma_addr_t)p), size); + if (copy_to_user(q, buf, s) != 0) { +- pr_err("[%s]: failed to copy-to-user\n", +- __func__); ++ pr_err("[%s]: failed to copy-to-user\n", __func__); + rc = -EFAULT; + goto out; + } +@@ -755,7 +747,6 @@ static void bcm2708_fb_copyarea(struct f + /* end of dma control blocks chain */ + cb->next = 0; + +- + if (pixels < dma_busy_wait_threshold) { + bcm_dma_start(fb->dma_chan_base, fb->cb_handle); + bcm_dma_wait_idle(fb->dma_chan_base); +@@ -765,9 +756,8 @@ static void bcm2708_fb_copyarea(struct f + cb->info |= BCM2708_DMA_INT_EN; + bcm_dma_start(fb->dma_chan_base, fb->cb_handle); + while (bcm_dma_is_busy(dma_chan)) { +- wait_event_interruptible( +- fb->dma_waitq, +- !bcm_dma_is_busy(dma_chan)); ++ wait_event_interruptible(fb->dma_waitq, ++ !bcm_dma_is_busy(dma_chan)); + } + fb->stats.dma_irqs++; + } +@@ -863,7 +853,7 @@ static int bcm2708_fb_register(struct bc + return ret; + + print_debug("BCM2708FB: registering framebuffer (%dx%d@%d) (%d)\n", +- fbwidth, fbheight, fbdepth, fbswap); ++ fbwidth, fbheight, fbdepth, fbswap); + + ret = register_framebuffer(&fb->fb); + print_debug("BCM2708FB: register framebuffer (%d)\n", ret); +@@ -893,7 +883,7 @@ static int bcm2708_fb_probe(struct platf + if (!fw) + return -EPROBE_DEFER; + +- fb = kzalloc(sizeof(struct bcm2708_fb), GFP_KERNEL); ++ fb = kzalloc(sizeof(*fb), GFP_KERNEL); + if (!fb) { + ret = -ENOMEM; + goto free_region; +@@ -927,7 +917,6 @@ static int bcm2708_fb_probe(struct platf + goto free_dma_chan; + } + +- + pr_info("BCM2708FB: allocated DMA channel %d\n", fb->dma_chan); + + fb->dev = dev; +@@ -936,9 +925,8 @@ static int bcm2708_fb_probe(struct platf + /* failure here isn't fatal, but we'll fail in vc_mem_copy if + * fb->gpu is not valid + */ +- rpi_firmware_property(fb->fw, +- RPI_FIRMWARE_GET_VC_MEMORY, +- &fb->gpu, sizeof(fb->gpu)); ++ rpi_firmware_property(fb->fw, RPI_FIRMWARE_GET_VC_MEMORY, &fb->gpu, ++ sizeof(fb->gpu)); + + ret = bcm2708_fb_register(fb); + if (ret == 0) { diff --git a/target/linux/brcm2708/patches-4.19/950-0304-bcm2835-dma-Add-support-for-per-channel-flags.patch b/target/linux/brcm2708/patches-4.19/950-0304-bcm2835-dma-Add-support-for-per-channel-flags.patch new file mode 100644 index 0000000000..ff564390cf --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0304-bcm2835-dma-Add-support-for-per-channel-flags.patch @@ -0,0 +1,48 @@ +From 4ebec374d97c0bba1e41558071bfa062894b07a0 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 20 Jul 2018 22:03:41 +0100 +Subject: [PATCH] bcm2835-dma: Add support for per-channel flags + +Add the ability to interpret the high bits of the dreq specifier as +flags to be included in the DMA_CS register. The motivation for this +change is the ability to set the DISDEBUG flag for SD card transfers +to avoid corruption when using the VPU debugger. + +Signed-off-by: Phil Elwell +--- + drivers/dma/bcm2835-dma.c | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +--- a/drivers/dma/bcm2835-dma.c ++++ b/drivers/dma/bcm2835-dma.c +@@ -146,6 +146,10 @@ struct bcm2835_desc { + #define BCM2835_DMA_S_DREQ BIT(10) /* enable SREQ for source */ + #define BCM2835_DMA_S_IGNORE BIT(11) /* ignore source reads - read 0 */ + #define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12) ++#define BCM2835_DMA_CS_FLAGS(x) (x & (BCM2835_DMA_PRIORITY(15) | \ ++ BCM2835_DMA_PANIC_PRIORITY(15) | \ ++ BCM2835_DMA_WAIT_FOR_WRITES | \ ++ BCM2835_DMA_DIS_DEBUG)) + #define BCM2835_DMA_PER_MAP(x) ((x & 31) << 16) /* REQ source */ + #define BCM2835_DMA_WAIT(x) ((x & 31) << 21) /* add DMA-wait cycles */ + #define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */ +@@ -461,7 +465,8 @@ static void bcm2835_dma_start_desc(struc + c->desc = d = to_bcm2835_dma_desc(&vd->tx); + + writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); +- writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS); ++ writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq), ++ c->chan_base + BCM2835_DMA_CS); + } + + static irqreturn_t bcm2835_dma_callback(int irq, void *data) +@@ -488,7 +493,8 @@ static irqreturn_t bcm2835_dma_callback( + * if this IRQ handler is threaded.) If the channel is finished, it + * will remain idle despite the ACTIVE flag being set. + */ +- writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE, ++ writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE | ++ BCM2835_DMA_CS_FLAGS(c->dreq), + c->chan_base + BCM2835_DMA_CS); + + d = c->desc; diff --git a/target/linux/brcm2708/patches-4.19/950-0304-dwc_otg-fix-bug-with-port_addr-assignment-for-single.patch b/target/linux/brcm2708/patches-4.19/950-0304-dwc_otg-fix-bug-with-port_addr-assignment-for-single.patch deleted file mode 100644 index c80a2133e4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0304-dwc_otg-fix-bug-with-port_addr-assignment-for-single.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 6e56da00afdf11416045213552514d10bab845cc Mon Sep 17 00:00:00 2001 -From: P33M -Date: Wed, 16 Jan 2019 10:17:52 +0000 -Subject: [PATCH 304/806] dwc_otg: fix bug with port_addr assignment for - single-TT hubs - -See https://github.com/raspberrypi/linux/issues/2734 - -The "Hub Port" field in the split transaction packet was always set -to 1 for single-TT hubs. The majority of single-TT hub products -apparently ignore this field and broadcast to all downstream enabled -ports, which masked the issue. A subset of hub devices apparently -need the port number to be exact or split transactions will fail. ---- - drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -@@ -232,7 +232,7 @@ static int _hub_info(dwc_otg_hcd_t * hcd - else - *hub_addr = urb->dev->tt->hub->devnum; - } -- *port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1; -+ *port_addr = urb->dev->ttport; - } else { - *hub_addr = 0; - *port_addr = urb->dev->ttport; diff --git a/target/linux/brcm2708/patches-4.19/950-0305-bcm283x-Set-the-DISDEBUG-flag-for-SD-transfers.patch b/target/linux/brcm2708/patches-4.19/950-0305-bcm283x-Set-the-DISDEBUG-flag-for-SD-transfers.patch new file mode 100644 index 0000000000..ec0d0d882b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0305-bcm283x-Set-the-DISDEBUG-flag-for-SD-transfers.patch @@ -0,0 +1,21 @@ +From 18a739ba2e76a5e2bb3a02d9083faeabdee93777 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 20 Jul 2018 22:08:05 +0100 +Subject: [PATCH] bcm283x: Set the DISDEBUG flag for SD transfers + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm283x.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -400,7 +400,7 @@ + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; +- dmas = <&dma 13>; ++ dmas = <&dma (13|(1<<29))>; + dma-names = "rx-tx"; + status = "disabled"; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0306-ASoC-pcm512x-Implement-the-digital_mute-interface.patch b/target/linux/brcm2708/patches-4.19/950-0306-ASoC-pcm512x-Implement-the-digital_mute-interface.patch new file mode 100644 index 0000000000..e68cf7b2f9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0306-ASoC-pcm512x-Implement-the-digital_mute-interface.patch @@ -0,0 +1,196 @@ +From 4a15efde52bb79bf44e63b998cd84f896404d728 Mon Sep 17 00:00:00 2001 +From: Dimitris Papavasiliou +Date: Sat, 24 Nov 2018 22:05:42 +0200 +Subject: [PATCH] ASoC: pcm512x: Implement the digital_mute interface + +[ Upstream commit 3500f1c589e92e0b6b1f8d31b4084fbde08d49cb ] + +Clicks and pops of various volumes can be produced while the device is +opened, closed, put into and taken out of standby, or reconfigured. +Fix this, by implementing the digital_mute interface, so that the +output is muted during such operations. + +Signed-off-by: Dimitris Papavasiliou +Signed-off-by: Mark Brown +--- + sound/soc/codecs/pcm512x.c | 121 ++++++++++++++++++++++++++++++++++++- + sound/soc/codecs/pcm512x.h | 2 + + 2 files changed, 121 insertions(+), 2 deletions(-) + +--- a/sound/soc/codecs/pcm512x.c ++++ b/sound/soc/codecs/pcm512x.c +@@ -53,6 +53,8 @@ struct pcm512x_priv { + unsigned long overclock_pll; + unsigned long overclock_dac; + unsigned long overclock_dsp; ++ int mute; ++ struct mutex mutex; + int lrclk_div; + }; + +@@ -385,6 +387,61 @@ static const struct soc_enum pcm512x_ved + SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_2, PCM512x_VEDS_SHIFT, 4, + pcm512x_ramp_step_text); + ++static int pcm512x_update_mute(struct pcm512x_priv *pcm512x) ++{ ++ return regmap_update_bits( ++ pcm512x->regmap, PCM512x_MUTE, PCM512x_RQML | PCM512x_RQMR, ++ (!!(pcm512x->mute & 0x5) << PCM512x_RQML_SHIFT) ++ | (!!(pcm512x->mute & 0x3) << PCM512x_RQMR_SHIFT)); ++} ++ ++static int pcm512x_digital_playback_switch_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); ++ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); ++ ++ mutex_lock(&pcm512x->mutex); ++ ucontrol->value.integer.value[0] = !(pcm512x->mute & 0x4); ++ ucontrol->value.integer.value[1] = !(pcm512x->mute & 0x2); ++ mutex_unlock(&pcm512x->mutex); ++ ++ return 0; ++} ++ ++static int pcm512x_digital_playback_switch_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); ++ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); ++ int ret, changed = 0; ++ ++ mutex_lock(&pcm512x->mutex); ++ ++ if ((pcm512x->mute & 0x4) == (ucontrol->value.integer.value[0] << 2)) { ++ pcm512x->mute ^= 0x4; ++ changed = 1; ++ } ++ if ((pcm512x->mute & 0x2) == (ucontrol->value.integer.value[1] << 1)) { ++ pcm512x->mute ^= 0x2; ++ changed = 1; ++ } ++ ++ if (changed) { ++ ret = pcm512x_update_mute(pcm512x); ++ if (ret != 0) { ++ dev_err(component->dev, ++ "Failed to update digital mute: %d\n", ret); ++ mutex_unlock(&pcm512x->mutex); ++ return ret; ++ } ++ } ++ ++ mutex_unlock(&pcm512x->mutex); ++ ++ return changed; ++} ++ + static const struct snd_kcontrol_new pcm512x_controls[] = { + SOC_DOUBLE_R_TLV("Digital Playback Volume", PCM512x_DIGITAL_VOLUME_2, + PCM512x_DIGITAL_VOLUME_3, 0, 255, 1, digital_tlv), +@@ -392,8 +449,15 @@ SOC_DOUBLE_TLV("Analogue Playback Volume + PCM512x_LAGN_SHIFT, PCM512x_RAGN_SHIFT, 1, 1, analog_tlv), + SOC_DOUBLE_TLV("Analogue Playback Boost Volume", PCM512x_ANALOG_GAIN_BOOST, + PCM512x_AGBL_SHIFT, PCM512x_AGBR_SHIFT, 1, 0, boost_tlv), +-SOC_DOUBLE("Digital Playback Switch", PCM512x_MUTE, PCM512x_RQML_SHIFT, +- PCM512x_RQMR_SHIFT, 1, 1), ++{ ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "Digital Playback Switch", ++ .index = 0, ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, ++ .info = snd_ctl_boolean_stereo_info, ++ .get = pcm512x_digital_playback_switch_get, ++ .put = pcm512x_digital_playback_switch_put ++}, + + SOC_SINGLE("Deemphasis Switch", PCM512x_DSP, PCM512x_DEMP_SHIFT, 1, 1), + SOC_ENUM("DSP Program", pcm512x_dsp_program), +@@ -1323,6 +1387,56 @@ static int pcm512x_set_fmt(struct snd_so + return 0; + } + ++static int pcm512x_digital_mute(struct snd_soc_dai *dai, int mute) ++{ ++ struct snd_soc_component *component = dai->component; ++ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); ++ int ret; ++ unsigned int mute_det; ++ ++ mutex_lock(&pcm512x->mutex); ++ ++ if (mute) { ++ pcm512x->mute |= 0x1; ++ ret = regmap_update_bits(pcm512x->regmap, PCM512x_MUTE, ++ PCM512x_RQML | PCM512x_RQMR, ++ PCM512x_RQML | PCM512x_RQMR); ++ if (ret != 0) { ++ dev_err(component->dev, ++ "Failed to set digital mute: %d\n", ret); ++ mutex_unlock(&pcm512x->mutex); ++ return ret; ++ } ++ ++ regmap_read_poll_timeout(pcm512x->regmap, ++ PCM512x_ANALOG_MUTE_DET, ++ mute_det, (mute_det & 0x3) == 0, ++ 200, 10000); ++ ++ mutex_unlock(&pcm512x->mutex); ++ } else { ++ pcm512x->mute &= ~0x1; ++ ret = pcm512x_update_mute(pcm512x); ++ if (ret != 0) { ++ dev_err(component->dev, ++ "Failed to update digital mute: %d\n", ret); ++ mutex_unlock(&pcm512x->mutex); ++ return ret; ++ } ++ ++ regmap_read_poll_timeout(pcm512x->regmap, ++ PCM512x_ANALOG_MUTE_DET, ++ mute_det, ++ (mute_det & 0x3) ++ == ((~pcm512x->mute >> 1) & 0x3), ++ 200, 10000); ++ } ++ ++ mutex_unlock(&pcm512x->mutex); ++ ++ return 0; ++} ++ + static int pcm512x_set_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int width) +@@ -1348,6 +1462,7 @@ static const struct snd_soc_dai_ops pcm5 + .startup = pcm512x_dai_startup, + .hw_params = pcm512x_hw_params, + .set_fmt = pcm512x_set_fmt, ++ .digital_mute = pcm512x_digital_mute, + .set_tdm_slot = pcm512x_set_tdm_slot, + }; + +@@ -1414,6 +1529,8 @@ int pcm512x_probe(struct device *dev, st + if (!pcm512x) + return -ENOMEM; + ++ mutex_init(&pcm512x->mutex); ++ + dev_set_drvdata(dev, pcm512x); + pcm512x->regmap = regmap; + +--- a/sound/soc/codecs/pcm512x.h ++++ b/sound/soc/codecs/pcm512x.h +@@ -112,7 +112,9 @@ + #define PCM512x_RQST_SHIFT 4 + + /* Page 0, Register 3 - mute */ ++#define PCM512x_RQMR (1 << 0) + #define PCM512x_RQMR_SHIFT 0 ++#define PCM512x_RQML (1 << 4) + #define PCM512x_RQML_SHIFT 4 + + /* Page 0, Register 4 - PLL */ diff --git a/target/linux/brcm2708/patches-4.19/950-0306-Added-driver-for-the-HiFiBerry-DAC-ADC-2694.patch b/target/linux/brcm2708/patches-4.19/950-0306-Added-driver-for-the-HiFiBerry-DAC-ADC-2694.patch deleted file mode 100644 index f06f4cd96b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0306-Added-driver-for-the-HiFiBerry-DAC-ADC-2694.patch +++ /dev/null @@ -1,576 +0,0 @@ -From dde0ec6b9fd5755de3a8962489cde9c0ce5e5005 Mon Sep 17 00:00:00 2001 -From: HiFiBerry -Date: Mon, 8 Oct 2018 18:10:12 +0200 -Subject: [PATCH 306/806] Added driver for the HiFiBerry DAC+ ADC (#2694) - -Signed-off-by: Daniel Matuschek ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 21 + - .../overlays/hifiberry-dacplusadc-overlay.dts | 71 +++ - sound/soc/bcm/Kconfig | 8 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/hifiberry_dacplusadc.c | 407 ++++++++++++++++++ - 8 files changed, 512 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts - create mode 100644 sound/soc/bcm/hifiberry_dacplusadc.c - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -49,6 +49,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - hifiberry-amp.dtbo \ - hifiberry-dac.dtbo \ - hifiberry-dacplus.dtbo \ -+ hifiberry-dacplusadc.dtbo \ - hifiberry-digi.dtbo \ - hifiberry-digi-pro.dtbo \ - hy28a.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -779,6 +779,27 @@ Params: 24db_digital_gain Allow ga - master for bit clock and frame clock. - - -+Name: hifiberry-dacplusadc -+Info: Configures the HifiBerry DAC+ADC audio card -+Load: dtoverlay=hifiberry-dacplusadc,= -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=hifiberry-dacplus,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ slave Force DAC+ Pro into slave mode, using Pi as -+ master for bit clock and frame clock. -+ -+ - Name: hifiberry-digi - Info: Configures the HifiBerry Digi and Digi+ audio card - Load: dtoverlay=hifiberry-digi ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts -@@ -0,0 +1,71 @@ -+// Definitions for HiFiBerry DAC+ADC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ dacpro_osc: dacpro_osc { -+ compatible = "hifiberry,dacpro-clk"; -+ #clock-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm_codec: pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ clocks = <&dacpro_osc>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/"; -+ __overlay__ { -+ dmic { -+ #sound-dai-cells = <0>; -+ compatible = "dmic-codec"; -+ num-channels = <2>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&sound>; -+ hifiberry_dacplusadc: __overlay__ { -+ compatible = "hifiberry,hifiberry-dacplusadc"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = -+ <&hifiberry_dacplusadc>,"hifiberry,24db_digital_gain?"; -+ slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?"; -+ }; -+}; ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -46,6 +46,14 @@ config SND_BCM2708_SOC_HIFIBERRY_DACPLUS - help - Say Y or M if you want to add support for HifiBerry DAC+. - -+config SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC -+ tristate "Support for HifiBerry DAC+ADC" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM512x_I2C -+ select SND_SOC_DMIC -+ help -+ Say Y or M if you want to add support for HifiBerry DAC+ADC. -+ - config SND_BCM2708_SOC_HIFIBERRY_DIGI - tristate "Support for HifiBerry Digi" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -14,6 +14,7 @@ snd-soc-googlevoicehat-codec-objs := goo - # BCM2708 Machine Support - snd-soc-3dlab-nano-player-objs := 3dlab-nano-player.o - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o -+snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o - snd-soc-justboom-dac-objs := justboom-dac.o - snd-soc-rpi-cirrus-objs := rpi-cirrus.o - snd-soc-rpi-proto-objs := rpi-proto.o -@@ -36,6 +37,7 @@ snd-soc-rpi-wm8804-soundcard-objs := rpi - obj-$(CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER) += snd-soc-3dlab-nano-player.o - obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o - obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o ---- /dev/null -+++ b/sound/soc/bcm/hifiberry_dacplusadc.c -@@ -0,0 +1,407 @@ -+/* -+ * ASoC Driver for HiFiBerry DAC+ / DAC Pro with ADC -+ * -+ * Author: Daniel Matuschek, Stuart MacLean -+ * Copyright 2014-2015 -+ * based on code by Florian Meier -+ * ADC added by Joerg Schambacher -+ * Copyright 2018 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/pcm512x.h" -+ -+#define HIFIBERRY_DACPRO_NOCLOCK 0 -+#define HIFIBERRY_DACPRO_CLK44EN 1 -+#define HIFIBERRY_DACPRO_CLK48EN 2 -+ -+struct platform_device *dmic_codec_dev; -+ -+struct pcm512x_priv { -+ struct regmap *regmap; -+ struct clk *sclk; -+}; -+ -+/* Clock rate of CLK44EN attached to GPIO6 pin */ -+#define CLK_44EN_RATE 22579200UL -+/* Clock rate of CLK48EN attached to GPIO3 pin */ -+#define CLK_48EN_RATE 24576000UL -+ -+static bool slave; -+static bool snd_rpi_hifiberry_is_dacpro; -+static bool digital_gain_0db_limit = true; -+ -+static void snd_rpi_hifiberry_dacplusadc_select_clk(struct snd_soc_component *component, -+ int clk_id) -+{ -+ switch (clk_id) { -+ case HIFIBERRY_DACPRO_NOCLOCK: -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x24, 0x00); -+ break; -+ case HIFIBERRY_DACPRO_CLK44EN: -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x24, 0x20); -+ break; -+ case HIFIBERRY_DACPRO_CLK48EN: -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x24, 0x04); -+ break; -+ } -+} -+ -+static void snd_rpi_hifiberry_dacplusadc_clk_gpio(struct snd_soc_component *component) -+{ -+ snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x24, 0x24); -+ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_3, 0x0f, 0x02); -+ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_6, 0x0f, 0x02); -+} -+ -+static bool snd_rpi_hifiberry_dacplusadc_is_sclk(struct snd_soc_component *component) -+{ -+ unsigned int sck; -+ -+ snd_soc_component_read(component, PCM512x_RATE_DET_4, &sck); -+ return (!(sck & 0x40)); -+} -+ -+static bool snd_rpi_hifiberry_dacplusadc_is_sclk_sleep( -+ struct snd_soc_component *component) -+{ -+ msleep(2); -+ return snd_rpi_hifiberry_dacplusadc_is_sclk(component); -+} -+ -+static bool snd_rpi_hifiberry_dacplusadc_is_pro_card(struct snd_soc_component *component) -+{ -+ bool isClk44EN, isClk48En, isNoClk; -+ -+ snd_rpi_hifiberry_dacplusadc_clk_gpio(component); -+ -+ snd_rpi_hifiberry_dacplusadc_select_clk(component, HIFIBERRY_DACPRO_CLK44EN); -+ isClk44EN = snd_rpi_hifiberry_dacplusadc_is_sclk_sleep(component); -+ -+ snd_rpi_hifiberry_dacplusadc_select_clk(component, HIFIBERRY_DACPRO_NOCLOCK); -+ isNoClk = snd_rpi_hifiberry_dacplusadc_is_sclk_sleep(component); -+ -+ snd_rpi_hifiberry_dacplusadc_select_clk(component, HIFIBERRY_DACPRO_CLK48EN); -+ isClk48En = snd_rpi_hifiberry_dacplusadc_is_sclk_sleep(component); -+ -+ return (isClk44EN && isClk48En && !isNoClk); -+} -+ -+static int snd_rpi_hifiberry_dacplusadc_clk_for_rate(int sample_rate) -+{ -+ int type; -+ -+ switch (sample_rate) { -+ case 11025: -+ case 22050: -+ case 44100: -+ case 88200: -+ case 176400: -+ case 352800: -+ type = HIFIBERRY_DACPRO_CLK44EN; -+ break; -+ default: -+ type = HIFIBERRY_DACPRO_CLK48EN; -+ break; -+ } -+ return type; -+} -+ -+static void snd_rpi_hifiberry_dacplusadc_set_sclk(struct snd_soc_component *component, -+ int sample_rate) -+{ -+ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); -+ -+ if (!IS_ERR(pcm512x->sclk)) { -+ int ctype; -+ -+ ctype = snd_rpi_hifiberry_dacplusadc_clk_for_rate(sample_rate); -+ clk_set_rate(pcm512x->sclk, (ctype == HIFIBERRY_DACPRO_CLK44EN) -+ ? CLK_44EN_RATE : CLK_48EN_RATE); -+ snd_rpi_hifiberry_dacplusadc_select_clk(component, ctype); -+ } -+} -+ -+static int snd_rpi_hifiberry_dacplusadc_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_component *component = rtd->codec_dai->component; -+ struct pcm512x_priv *priv; -+ -+ if (slave) -+ snd_rpi_hifiberry_is_dacpro = false; -+ else -+ snd_rpi_hifiberry_is_dacpro = -+ snd_rpi_hifiberry_dacplusadc_is_pro_card(component); -+ -+ if (snd_rpi_hifiberry_is_dacpro) { -+ struct snd_soc_dai_link *dai = rtd->dai_link; -+ -+ dai->name = "HiFiBerry ADCDAC+ Pro"; -+ dai->stream_name = "HiFiBerry ADCDAC+ Pro HiFi"; -+ dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBM_CFM; -+ -+ snd_soc_component_update_bits(component, PCM512x_BCLK_LRCLK_CFG, 0x31, 0x11); -+ snd_soc_component_update_bits(component, PCM512x_MASTER_MODE, 0x03, 0x03); -+ snd_soc_component_update_bits(component, PCM512x_MASTER_CLKDIV_2, 0x7f, 63); -+ } else { -+ priv = snd_soc_component_get_drvdata(component); -+ priv->sclk = ERR_PTR(-ENOENT); -+ } -+ -+ snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x08, 0x08); -+ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); -+ -+ if (digital_gain_0db_limit) { -+ int ret; -+ struct snd_soc_card *card = rtd->card; -+ -+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); -+ } -+ -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_dacplusadc_update_rate_den( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_component *component = rtd->codec_dai->component; -+ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); -+ struct snd_ratnum *rats_no_pll; -+ unsigned int num = 0, den = 0; -+ int err; -+ -+ rats_no_pll = devm_kzalloc(rtd->dev, sizeof(*rats_no_pll), GFP_KERNEL); -+ if (!rats_no_pll) -+ return -ENOMEM; -+ -+ rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64; -+ rats_no_pll->den_min = 1; -+ rats_no_pll->den_max = 128; -+ rats_no_pll->den_step = 1; -+ -+ err = snd_interval_ratnum(hw_param_interval(params, -+ SNDRV_PCM_HW_PARAM_RATE), 1, rats_no_pll, &num, &den); -+ if (err >= 0 && den) { -+ params->rate_num = num; -+ params->rate_den = den; -+ } -+ -+ devm_kfree(rtd->dev, rats_no_pll); -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_dacplusadc_hw_params( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ int ret = 0; -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ int channels = params_channels(params); -+ int width = 32; -+ -+ if (snd_rpi_hifiberry_is_dacpro) { -+ struct snd_soc_component *component = rtd->codec_dai->component; -+ -+ width = snd_pcm_format_physical_width(params_format(params)); -+ -+ snd_rpi_hifiberry_dacplusadc_set_sclk(component, -+ params_rate(params)); -+ -+ ret = snd_rpi_hifiberry_dacplusadc_update_rate_den( -+ substream, params); -+ } -+ -+ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x03, 0x03, -+ channels, width); -+ if (ret) -+ return ret; -+ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0x03, 0x03, -+ channels, width); -+ return ret; -+} -+ -+static int hifiberry_dacplusadc_LED_cnt; -+ -+static int snd_rpi_hifiberry_dacplusadc_startup( -+ struct snd_pcm_substream *substream) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_component *component = rtd->codec_dai->component; -+ -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, -+ 0x08, 0x08); -+ hifiberry_dacplusadc_LED_cnt++; -+ return 0; -+} -+ -+static void snd_rpi_hifiberry_dacplusadc_shutdown( -+ struct snd_pcm_substream *substream) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_component *component = rtd->codec_dai->component; -+ -+ hifiberry_dacplusadc_LED_cnt--; -+ if (!hifiberry_dacplusadc_LED_cnt) -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, -+ 0x08, 0x00); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_hifiberry_dacplusadc_ops = { -+ .hw_params = snd_rpi_hifiberry_dacplusadc_hw_params, -+ .startup = snd_rpi_hifiberry_dacplusadc_startup, -+ .shutdown = snd_rpi_hifiberry_dacplusadc_shutdown, -+}; -+ -+static struct snd_soc_dai_link_component snd_rpi_hifiberry_dacplusadc_codecs[] = { -+ { -+ .name = "pcm512x.1-004d", -+ .dai_name = "pcm512x-hifi", -+ }, -+ { -+ .name = "dmic-codec", -+ .dai_name = "dmic-hifi", -+ }, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_hifiberry_dacplusadc_dai[] = { -+{ -+ .name = "HiFiBerry DAC+ADC", -+ .stream_name = "HiFiBerry DAC+ADC HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .platform_name = "bcm2708-i2s.0", -+ .codecs = snd_rpi_hifiberry_dacplusadc_codecs, -+ .num_codecs = 2, -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_hifiberry_dacplusadc_ops, -+ .init = snd_rpi_hifiberry_dacplusadc_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_hifiberry_dacplusadc = { -+ .name = "snd_rpi_hifiberry_dacplusadc", -+ .driver_name = "HifiberryDacpAdc", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_hifiberry_dacplusadc_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dacplusadc_dai), -+}; -+ -+ -+static int snd_rpi_hifiberry_dacplusadc_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_hifiberry_dacplusadc.dev = &pdev->dev; -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai; -+ -+ dai = &snd_rpi_hifiberry_dacplusadc_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ if (i2s_node) { -+ dai->cpu_of_node = i2s_node; -+ dai->platform_of_node = i2s_node; -+ dai->cpu_dai_name = NULL; -+ dai->platform_name = NULL; -+ } -+ dai = &snd_rpi_hifiberry_dacplusadc_dai[1]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, "dmic", 0); -+ if (i2s_node) { -+ dai->cpu_of_node = i2s_node; -+ dai->platform_of_node = i2s_node; -+ } -+ -+ } -+ digital_gain_0db_limit = !of_property_read_bool( -+ pdev->dev.of_node, "hifiberry,24db_digital_gain"); -+ slave = of_property_read_bool(pdev->dev.of_node, -+ "hifiberry-dacplusadc,slave"); -+ -+ ret = devm_snd_soc_register_card(&pdev->dev, -+ &snd_rpi_hifiberry_dacplusadc); -+ if (ret && ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static const struct of_device_id snd_rpi_hifiberry_dacplusadc_of_match[] = { -+ { .compatible = "hifiberry,hifiberry-dacplusadc", }, -+ {}, -+}; -+ -+MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplusadc_of_match); -+ -+static struct platform_driver snd_rpi_hifiberry_dacplusadc_driver = { -+ .driver = { -+ .name = "snd-rpi-hifiberry-dacplusadc", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_hifiberry_dacplusadc_of_match, -+ }, -+ .probe = snd_rpi_hifiberry_dacplusadc_probe, -+}; -+ -+static int __init hifiberry_dacplusadc_init(void) -+{ -+ int ret; -+ -+ dmic_codec_dev = platform_device_register_simple("dmic-codec", -1, NULL, -+ 0); -+ if (IS_ERR(dmic_codec_dev)) { -+ pr_err("%s: dmic-codec device registration failed\n", __func__); -+ return PTR_ERR(dmic_codec_dev); -+ } -+ -+ ret = platform_driver_register(&snd_rpi_hifiberry_dacplusadc_driver); -+ if (ret) { -+ pr_err("%s: platform driver registration failed\n", __func__); -+ platform_device_unregister(dmic_codec_dev); -+ } -+ -+ return ret; -+} -+module_init(hifiberry_dacplusadc_init); -+ -+static void __exit hifiberry_dacplusadc_exit(void) -+{ -+ platform_driver_unregister(&snd_rpi_hifiberry_dacplusadc_driver); -+ platform_device_unregister(dmic_codec_dev); -+} -+module_exit(hifiberry_dacplusadc_exit); -+ -+MODULE_AUTHOR("Joerg Schambacher "); -+MODULE_AUTHOR("Daniel Matuschek "); -+MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+ADC"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.19/950-0307-ASoC-pcm512x-Fix-a-double-unlock-in-pcm512x_digital_.patch b/target/linux/brcm2708/patches-4.19/950-0307-ASoC-pcm512x-Fix-a-double-unlock-in-pcm512x_digital_.patch new file mode 100644 index 0000000000..f1a09c4922 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0307-ASoC-pcm512x-Fix-a-double-unlock-in-pcm512x_digital_.patch @@ -0,0 +1,62 @@ +From 26001d54a7f803258b161f25f457ce11523695d7 Mon Sep 17 00:00:00 2001 +From: Dan Carpenter +Date: Fri, 21 Dec 2018 12:11:20 +0300 +Subject: [PATCH] ASoC: pcm512x: Fix a double unlock in + pcm512x_digital_mute() + +[ Upstream commit 28b698b7342c7d5300cfe217cd77ff7d2a55e03d ] + +We accidentally call mutex_unlock(&pcm512x->mutex); twice in a row. + +I re-wrote the error handling to use "goto unlock;" instead of returning +directly. Hopefully, it makes the code a little simpler. + +Fixes: 3500f1c589e9 ("ASoC: pcm512x: Implement the digital_mute interface") +Signed-off-by: Dan Carpenter +Reviwed-by: Dimitris Papavasiliou +Signed-off-by: Mark Brown +--- + sound/soc/codecs/pcm512x.c | 11 ++++------- + 1 file changed, 4 insertions(+), 7 deletions(-) + +--- a/sound/soc/codecs/pcm512x.c ++++ b/sound/soc/codecs/pcm512x.c +@@ -1404,24 +1404,20 @@ static int pcm512x_digital_mute(struct s + if (ret != 0) { + dev_err(component->dev, + "Failed to set digital mute: %d\n", ret); +- mutex_unlock(&pcm512x->mutex); +- return ret; ++ goto unlock; + } + + regmap_read_poll_timeout(pcm512x->regmap, + PCM512x_ANALOG_MUTE_DET, + mute_det, (mute_det & 0x3) == 0, + 200, 10000); +- +- mutex_unlock(&pcm512x->mutex); + } else { + pcm512x->mute &= ~0x1; + ret = pcm512x_update_mute(pcm512x); + if (ret != 0) { + dev_err(component->dev, + "Failed to update digital mute: %d\n", ret); +- mutex_unlock(&pcm512x->mutex); +- return ret; ++ goto unlock; + } + + regmap_read_poll_timeout(pcm512x->regmap, +@@ -1432,9 +1428,10 @@ static int pcm512x_digital_mute(struct s + 200, 10000); + } + ++unlock: + mutex_unlock(&pcm512x->mutex); + +- return 0; ++ return ret; + } + + static int pcm512x_set_tdm_slot(struct snd_soc_dai *dai, diff --git a/target/linux/brcm2708/patches-4.19/950-0307-pwm-Send-a-uevent-on-the-pwmchip-device-upon-channel.patch b/target/linux/brcm2708/patches-4.19/950-0307-pwm-Send-a-uevent-on-the-pwmchip-device-upon-channel.patch deleted file mode 100644 index a7f526a038..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0307-pwm-Send-a-uevent-on-the-pwmchip-device-upon-channel.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 20a5b38305df30e25b4429e0e34e35235dd57228 Mon Sep 17 00:00:00 2001 -From: Fabrice Gasnier -Date: Mon, 1 Oct 2018 15:23:57 +0200 -Subject: [PATCH 307/806] pwm: Send a uevent on the pwmchip device upon channel - sysfs (un)export -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -commit 552c02e3e7cfe2744b59de285aaea70021ae95c9 upstream. - -This patch sends a uevent (KOBJ_CHANGE) on the pwmchipN device, -everytime a pwmX channel has been exported/unexported via sysfs. This -allows udev to implement rules on such events, like: - -SUBSYSTEM=="pwm*", PROGRAM="/bin/sh -c '\ - chown -R root:gpio /sys/class/pwm && chmod -R 770 /sys/class/pwm;\ - chown -R root:gpio -/sys/devices/platform/soc/*.pwm/pwm/pwmchip* && chmod -R 770 -/sys/devices/platform/soc/*.pwm/pwm/pwmchip*\ -'" - -This is a replacement patch for commit 7e5d1fd75c3d ("pwm: Set class for -exported channels in sysfs"), see [1]. - -basic testing: -$ udevadm monitor --environment & -$ echo 0 > /sys/class/pwm/pwmchip0/export -KERNEL[197.321736] change /devices/.../pwm/pwmchip0 (pwm) -ACTION=change -DEVPATH=/devices/.../pwm/pwmchip0 -EXPORT=pwm0 -SEQNUM=2045 -SUBSYSTEM=pwm - -[1] https://lkml.org/lkml/2018/9/25/713 - -Signed-off-by: Fabrice Gasnier -Tested-by: Gottfried Haider -Tested-by: Michal Vokáč -Signed-off-by: Thierry Reding ---- - drivers/pwm/sysfs.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/drivers/pwm/sysfs.c -+++ b/drivers/pwm/sysfs.c -@@ -249,6 +249,7 @@ static void pwm_export_release(struct de - static int pwm_export_child(struct device *parent, struct pwm_device *pwm) - { - struct pwm_export *export; -+ char *pwm_prop[2]; - int ret; - - if (test_and_set_bit(PWMF_EXPORTED, &pwm->flags)) -@@ -276,6 +277,10 @@ static int pwm_export_child(struct devic - export = NULL; - return ret; - } -+ pwm_prop[0] = kasprintf(GFP_KERNEL, "EXPORT=pwm%u", pwm->hwpwm); -+ pwm_prop[1] = NULL; -+ kobject_uevent_env(&parent->kobj, KOBJ_CHANGE, pwm_prop); -+ kfree(pwm_prop[0]); - - return 0; - } -@@ -288,6 +293,7 @@ static int pwm_unexport_match(struct dev - static int pwm_unexport_child(struct device *parent, struct pwm_device *pwm) - { - struct device *child; -+ char *pwm_prop[2]; - - if (!test_and_clear_bit(PWMF_EXPORTED, &pwm->flags)) - return -ENODEV; -@@ -296,6 +302,11 @@ static int pwm_unexport_child(struct dev - if (!child) - return -ENODEV; - -+ pwm_prop[0] = kasprintf(GFP_KERNEL, "UNEXPORT=pwm%u", pwm->hwpwm); -+ pwm_prop[1] = NULL; -+ kobject_uevent_env(&parent->kobj, KOBJ_CHANGE, pwm_prop); -+ kfree(pwm_prop[0]); -+ - /* for device_find_child() */ - put_device(child); - device_unregister(child); diff --git a/target/linux/brcm2708/patches-4.19/950-0308-overlays-Add-ssd1306-overlay-for-OLED-display.patch b/target/linux/brcm2708/patches-4.19/950-0308-overlays-Add-ssd1306-overlay-for-OLED-display.patch deleted file mode 100644 index 703d3feb1f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0308-overlays-Add-ssd1306-overlay-for-OLED-display.patch +++ /dev/null @@ -1,104 +0,0 @@ -From d8eac0d3e4f6c6f9e5f789c8e2288699b2afebcb Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 21 Jan 2019 21:17:27 +0000 -Subject: [PATCH 308/806] overlays: Add ssd1306 overlay for OLED display - -See: https://github.com/raspberrypi/firmware/issues/1098 - -Signed-off-by: mincepi ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 31 ++++++++++++++++ - .../arm/boot/dts/overlays/ssd1306-overlay.dts | 36 +++++++++++++++++++ - 3 files changed, 68 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/ssd1306-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -135,6 +135,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - spi2-1cs.dtbo \ - spi2-2cs.dtbo \ - spi2-3cs.dtbo \ -+ ssd1306.dtbo \ - superaudioboard.dtbo \ - sx150x.dtbo \ - tc358743.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1950,6 +1950,37 @@ Params: cs0_pin GPIO pin - is 'okay' or enabled). - - -+Name: ssd1306 -+Info: Overlay for activation of SSD1306 over I2C OLED display framebuffer. -+Load: dtoverlay=ssd1306,= -+Params: address Location in display memory of first character. -+ (default=0) -+ width Width of display. (default=128) -+ height Height of display. (default=64) -+ offset virtual channel a. (default=0) -+ normal Has no effect on displays tested. (default=not -+ set) -+ sequential Set this if every other scan line is missing. -+ (default=not set) -+ remapped Set this if display is garbled. (default=not -+ set) -+ inverted Set this if display is inverted and mirrored. -+ (default=not set) -+ -+ Examples: -+ Typical usage for 128x64 display: dtoverlay=ssd1306,inverted -+ -+ Typical usage for 128x32 display: dtoverlay=ssd1306,inverted,sequential -+ -+ i2c_baudrate=400000 will speed up the display. -+ -+ i2c_baudrate=1000000 seems to work even though it's not officially -+ supported by the hardware, and is faster still. -+ -+ For more information refer to the device datasheet at: -+ https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf -+ -+ - Name: superaudioboard - Info: Configures the SuperAudioBoard sound card - Load: dtoverlay=superaudioboard,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ssd1306-overlay.dts -@@ -0,0 +1,36 @@ -+// Overlay for SSD1306 128x64 and 128x32 OLED displays -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2718"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ status = "okay"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ssd1306: oled@3c{ -+ compatible = "solomon,ssd1306fb-i2c"; -+ reg = <0x3c>; -+ solomon,width = <128>; -+ solomon,height = <64>; -+ solomon,page-offset = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ address = <&ssd1306>,"reg:0"; -+ width = <&ssd1306>,"solomon,width:0"; -+ height = <&ssd1306>,"solomon,height:0"; -+ offset = <&ssd1306>,"solomon,page-offset:0"; -+ normal = <&ssd1306>,"solomon,segment-no-remap?"; -+ sequential = <&ssd1306>,"solomon,com-seq?"; -+ remapped = <&ssd1306>,"solomon,com-lrremap?"; -+ inverted = <&ssd1306>,"solomon,com-invdir?"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0308-usb-dwc_otg-Clean-up-build-warnings-on-64bit-kernels.patch b/target/linux/brcm2708/patches-4.19/950-0308-usb-dwc_otg-Clean-up-build-warnings-on-64bit-kernels.patch new file mode 100644 index 0000000000..cc99a11c94 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0308-usb-dwc_otg-Clean-up-build-warnings-on-64bit-kernels.patch @@ -0,0 +1,110 @@ +From d2536830d8f1ef06afdc84c5ac6e1a70b3a2bc40 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 25 Jan 2019 16:03:31 +0000 +Subject: [PATCH] usb: dwc_otg: Clean up build warnings on 64bit + kernels + +No functional changes. Almost all are changes to logging lines. + +Signed-off-by: Dave Stevenson +--- + drivers/usb/host/dwc_otg/dwc_otg_driver.c | 3 +-- + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 2 +- + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 19 ++++++++++++++----- + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 10 ++++------ + 4 files changed, 20 insertions(+), 14 deletions(-) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c +@@ -837,8 +837,7 @@ static int dwc_otg_driver_probe( + retval = -ENOMEM; + goto fail; + } +- dev_info(&_dev->dev, "base=0x%08x\n", +- (unsigned)dwc_otg_device->os_dep.base); ++ dev_info(&_dev->dev, "base=%p\n", dwc_otg_device->os_dep.base); + #endif + + /* +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +@@ -301,7 +301,7 @@ static int notrace fiq_iso_out_advance(s + last = 1; + + /* New DMA address - address of bounce buffer referred to in index */ +- hcdma.d32 = (uint32_t) &blob->channel[n].index[i].buf[0]; ++ hcdma.d32 = (dma_addr_t) blob->channel[n].index[i].buf; + //hcdma.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HC_DMA); + //hcdma.d32 += st->channel[n].dma_info.slot_len[i]; + fiq_print(FIQDBG_INT, st, "LAST: %01d ", last); +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -1041,8 +1041,8 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd + * moderately readable array casts. + */ + hcd->fiq_dmab = DWC_DMA_ALLOC(dev, (sizeof(struct fiq_dma_channel) * num_channels), &hcd->fiq_state->dma_base); +- DWC_WARN("FIQ DMA bounce buffers: virt = 0x%08x dma = 0x%08x len=%d", +- (unsigned int)hcd->fiq_dmab, (unsigned int)hcd->fiq_state->dma_base, ++ DWC_WARN("FIQ DMA bounce buffers: virt = %px dma = %pad len=%zu", ++ hcd->fiq_dmab, &hcd->fiq_state->dma_base, + sizeof(struct fiq_dma_channel) * num_channels); + + DWC_MEMSET(hcd->fiq_dmab, 0x6b, 9024); +@@ -1522,9 +1522,12 @@ int fiq_fsm_setup_periodic_dma(dwc_otg_h + /* + * Set dma_regs to bounce buffer. FIQ will update the + * state depending on transaction progress. ++ * Pointer arithmetic on hcd->fiq_state->dma_base (a dma_addr_t) ++ * to point it to the correct offset in the allocated buffers. + */ + blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; +- st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; ++ st->hcdma_copy.d32 = (dma_addr_t) blob->channel[hc->hc_num].index[0].buf; ++ + /* Calculate the max number of CSPLITS such that the FIQ can time out + * a transaction if it fails. + */ +@@ -1571,9 +1574,15 @@ int fiq_fsm_setup_periodic_dma(dwc_otg_h + st->nrpackets = i; + } + ptr = qtd->urb->buf + frame_desc->offset; +- /* Point the HC at the DMA address of the bounce buffers */ ++ /* ++ * Point the HC at the DMA address of the bounce buffers ++ * ++ * Pointer arithmetic on hcd->fiq_state->dma_base (a ++ * dma_addr_t) to point it to the correct offset in the ++ * allocated buffers. ++ */ + blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; +- st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; ++ st->hcdma_copy.d32 = (dma_addr_t) blob->channel[hc->hc_num].index[0].buf; + + /* fixup xfersize to the actual packet size */ + st->hctsiz_copy.b.pid = 0; +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -454,11 +454,9 @@ static void hcd_init_fiq(void *cookie) + DWC_ERROR("Can't claim FIQ"); + BUG(); + } +- DWC_WARN("FIQ on core %d at 0x%08x", +- smp_processor_id(), +- (fiq_fsm_enable ? (int)&dwc_otg_fiq_fsm : (int)&dwc_otg_fiq_nop)); +- DWC_WARN("FIQ ASM at 0x%08x length %d", (int)&_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub)); +- set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub); ++ DWC_WARN("FIQ on core %d", smp_processor_id()); ++ DWC_WARN("FIQ ASM at %px length %d", &_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub)); ++ set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub); + memset(®s,0,sizeof(regs)); + + regs.ARM_r8 = (long) dwc_otg_hcd->fiq_state; +@@ -483,7 +481,7 @@ static void hcd_init_fiq(void *cookie) + dwc_otg_hcd->fiq_state->mphi_regs.outddb = otg_dev->os_dep.mphi_base + 0x2c; + dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50; + dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base; +- DWC_WARN("MPHI regs_base at 0x%08x", (int)dwc_otg_hcd->fiq_state->mphi_regs.base); ++ DWC_WARN("MPHI regs_base at %px", dwc_otg_hcd->fiq_state->mphi_regs.base); + //Enable mphi peripheral + writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); + #ifdef DEBUG diff --git a/target/linux/brcm2708/patches-4.19/950-0309-overlays-mcp23017-Support-the-MCP23008.patch b/target/linux/brcm2708/patches-4.19/950-0309-overlays-mcp23017-Support-the-MCP23008.patch deleted file mode 100644 index 94fc8ad55e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0309-overlays-mcp23017-Support-the-MCP23008.patch +++ /dev/null @@ -1,49 +0,0 @@ -From c85a1ccbc6b1cab51a5fe5b916bcaf40bcd9096c Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 21 Jan 2019 12:19:57 +0000 -Subject: [PATCH 309/806] overlays: mcp23017: Support the MCP23008 - -Add an 'mcp23008' parameter to enable support for the MCP23008 device. - -See: https://github.com/raspberrypi/linux/issues/2818 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 2 ++ - arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 10 +++++++++- - 2 files changed, 11 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1212,6 +1212,8 @@ Params: gpiopin Gpio pin - - addr I2C address of the MCP23017 (default: 0x20) - -+ mcp23008 Configure an MCP23008 instead. -+ - - Name: mcp23s17 - Info: Configures the MCP23S08/17 SPI GPIO expanders. ---- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -@@ -44,11 +44,19 @@ - }; - }; - }; -- -+ -+ fragment@3 { -+ target = <&mcp23017>; -+ __dormant__ { -+ compatible = "microchip,mcp23008"; -+ }; -+ }; -+ - __overrides__ { - gpiopin = <&mcp23017_pins>,"brcm,pins:0", - <&mcp23017>,"interrupts:0"; - addr = <&mcp23017>,"reg:0"; -+ mcp23008 = <0>,"=3"; - }; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0309-usb-dwc_otg-Use-dma-allocation-for-mphi-dummy_send-b.patch b/target/linux/brcm2708/patches-4.19/950-0309-usb-dwc_otg-Use-dma-allocation-for-mphi-dummy_send-b.patch new file mode 100644 index 0000000000..edc9336804 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0309-usb-dwc_otg-Use-dma-allocation-for-mphi-dummy_send-b.patch @@ -0,0 +1,74 @@ +From f0d93c5098283f88ea1de3af152a190177da8f36 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 30 Jan 2019 17:47:51 +0000 +Subject: [PATCH] usb: dwc_otg: Use dma allocation for mphi dummy_send + buffer + +The FIQ driver used a kzalloc'ed buffer for dummy_send, +passing a kernel virtual address to the hardware block. +The buffer is only ever used for a dummy read, so it +should be harmless, but there is the chance that it will +cause exceptions. + +Use a dma allocation so that we have a genuine bus address, +and read from that. +Free the allocation when done for good measure. + +Signed-off-by: Dave Stevenson +--- + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 4 ++-- + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 1 + + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 5 ++++- + 3 files changed, 7 insertions(+), 3 deletions(-) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +@@ -1347,7 +1347,7 @@ void notrace dwc_otg_fiq_fsm(struct fiq_ + /* We got an interrupt, didn't handle it. */ + if (kick_irq) { + state->mphi_int_count++; +- FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); ++ FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); + FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); + + } +@@ -1408,7 +1408,7 @@ void notrace dwc_otg_fiq_nop(struct fiq_ + FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); + /* Force a clear before another dummy send */ + FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); +- FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); ++ FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); + FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); + + } +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h +@@ -352,6 +352,7 @@ struct fiq_state { + dma_addr_t dma_base; + struct fiq_dma_blob *fiq_dmab; + void *dummy_send; ++ dma_addr_t dummy_send_dma; + gintmsk_data_t gintmsk_saved; + haintmsk_data_t haintmsk_saved; + int mphi_int_count; +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -929,6 +929,8 @@ static void dwc_otg_hcd_free(dwc_otg_hcd + DWC_TIMER_FREE(dwc_otg_hcd->conn_timer); + DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet); + DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet); ++ DWC_DMA_FREE(dev, 16, dwc_otg_hcd->fiq_state->dummy_send, ++ dwc_otg_hcd->fiq_state->dummy_send_dma); + DWC_FREE(dwc_otg_hcd->fiq_state); + + #ifdef DWC_DEV_SRPCAP +@@ -1021,7 +1023,8 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd + for (i = 0; i < num_channels; i++) { + hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; + } +- hcd->fiq_state->dummy_send = DWC_ALLOC_ATOMIC(16); ++ hcd->fiq_state->dummy_send = DWC_DMA_ALLOC_ATOMIC(dev, 16, ++ &hcd->fiq_state->dummy_send_dma); + + hcd->fiq_stack = DWC_ALLOC(sizeof(struct fiq_stack)); + if (!hcd->fiq_stack) { diff --git a/target/linux/brcm2708/patches-4.19/950-0310-overlays-Add-mcp342x-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0310-overlays-Add-mcp342x-overlay.patch deleted file mode 100644 index 3e4a4108cd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0310-overlays-Add-mcp342x-overlay.patch +++ /dev/null @@ -1,148 +0,0 @@ -From b71f1fd962c66ba3fa46483f193cc2263146c5bf Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 21 Jan 2019 12:23:55 +0000 -Subject: [PATCH 310/806] overlays: Add mcp342x overlay - -Support the MCP342x family of ADCs from Microchip. - -See: https://github.com/raspberrypi/linux/issues/2819 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 16 ++++ - .../arm/boot/dts/overlays/mcp342x-overlay.dts | 93 +++++++++++++++++++ - 3 files changed, 110 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/mcp342x-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -79,6 +79,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - mcp2515-can1.dtbo \ - mcp3008.dtbo \ - mcp3202.dtbo \ -+ mcp342x.dtbo \ - media-center.dtbo \ - midi-uart0.dtbo \ - midi-uart1.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1277,6 +1277,22 @@ Params: spi--present boolean, - spi--speed integer, set the spi bus speed for this device - - -+Name: mcp342x -+Info: Overlay for activation of Microchip MCP3421-3428 ADCs over I2C -+Load: dtoverlay=mcp342x,= -+Params: addr I2C bus address of device, for devices with -+ addresses that are configurable, e.g. by -+ hardware links (default=0x68) -+ mcp3421 The device is an MCP3421 -+ mcp3422 The device is an MCP3422 -+ mcp3423 The device is an MCP3423 -+ mcp3424 The device is an MCP3424 -+ mcp3425 The device is an MCP3425 -+ mcp3426 The device is an MCP3426 -+ mcp3427 The device is an MCP3427 -+ mcp3428 The device is an MCP3428 -+ -+ - Name: media-center - Info: Media Center HAT - 2.83" Touch Display + extras by Pi Supply - Load: dtoverlay=media-center,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp342x-overlay.dts -@@ -0,0 +1,93 @@ -+// Overlay for MCP3421-8 ADCs from Microchip Semiconductor -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ mcp342x: mcp@68 { -+ reg = <0x68>; -+ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3421"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3422"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3423"; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3424"; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3425"; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3426"; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3427"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3428"; -+ }; -+ }; -+ -+ __overrides__ { -+ addr = <&mcp342x>,"reg:0"; -+ mcp3421 = <0>,"=1"; -+ mcp3422 = <0>,"=2"; -+ mcp3423 = <0>,"=3"; -+ mcp3424 = <0>,"=4"; -+ mcp3425 = <0>,"=5"; -+ mcp3426 = <0>,"=6"; -+ mcp3427 = <0>,"=7"; -+ mcp3428 = <0>,"=8"; -+ }; -+}; -+ diff --git a/target/linux/brcm2708/patches-4.19/950-0310-staging-vchiq_arm-Set-up-dma-ranges-on-child-devices.patch b/target/linux/brcm2708/patches-4.19/950-0310-staging-vchiq_arm-Set-up-dma-ranges-on-child-devices.patch new file mode 100644 index 0000000000..31e050aa55 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0310-staging-vchiq_arm-Set-up-dma-ranges-on-child-devices.patch @@ -0,0 +1,47 @@ +From f03f60a51efdf7fbc1f7d2c5b120a7de93ea6d9e Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 29 Jan 2019 16:13:25 +0000 +Subject: [PATCH] staging: vchiq_arm: Set up dma ranges on child + devices + +The VCHIQ driver now loads the audio, camera, codec, and vc-sm +drivers as platform drivers. However they were not being given +the correct DMA configuration. + +Call of_dma_configure with the parent (VCHIQ) parameters to be +inherited by the child. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 13 ++++++++++++- + 1 file changed, 12 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -3585,6 +3585,7 @@ static struct platform_device * + vchiq_register_child(struct platform_device *pdev, const char *name) + { + struct platform_device_info pdevinfo; ++ struct platform_device *new_dev; + + memset(&pdevinfo, 0, sizeof(pdevinfo)); + +@@ -3593,7 +3594,17 @@ vchiq_register_child(struct platform_dev + pdevinfo.id = PLATFORM_DEVID_NONE; + pdevinfo.dma_mask = DMA_BIT_MASK(32); + +- return platform_device_register_full(&pdevinfo); ++ new_dev = platform_device_register_full(&pdevinfo); ++ if (!new_dev) ++ return NULL; ++ ++ /* ++ * We want the dma-ranges etc to be copied from the parent VCHIQ device ++ * to be passed on to the children too. ++ */ ++ of_dma_configure(&new_dev->dev, pdev->dev.of_node, true); ++ ++ return new_dev; + } + + static int vchiq_probe(struct platform_device *pdev) diff --git a/target/linux/brcm2708/patches-4.19/950-0311-char-vcio-Add-compat-ioctl-handling.patch b/target/linux/brcm2708/patches-4.19/950-0311-char-vcio-Add-compat-ioctl-handling.patch deleted file mode 100644 index 3f49bfed83..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0311-char-vcio-Add-compat-ioctl-handling.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 70194b474d22974cd46356e5b3d3b0582abd02da Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 24 Jan 2019 13:56:30 +0000 -Subject: [PATCH 311/806] char: vcio: Add compat ioctl handling - -There was no compat ioctl handler, so 32 bit userspace on a -64 bit kernel failed as IOCTL_MBOX_PROPERTY used the size -of char*. - -Signed-off-by: Dave Stevenson ---- - drivers/char/broadcom/vcio.c | 22 +++++++++++++++++++++- - 1 file changed, 21 insertions(+), 1 deletion(-) - ---- a/drivers/char/broadcom/vcio.c -+++ b/drivers/char/broadcom/vcio.c -@@ -24,6 +24,9 @@ - - #define VCIO_IOC_MAGIC 100 - #define IOCTL_MBOX_PROPERTY _IOWR(VCIO_IOC_MAGIC, 0, char *) -+#ifdef CONFIG_COMPAT -+#define IOCTL_MBOX_PROPERTY32 _IOWR(VCIO_IOC_MAGIC, 0, compat_uptr_t) -+#endif - - static struct { - dev_t devt; -@@ -87,13 +90,30 @@ static long vcio_device_ioctl(struct fil - case IOCTL_MBOX_PROPERTY: - return vcio_user_property_list((void *)ioctl_param); - default: -- pr_err("unknown ioctl: %d\n", ioctl_num); -+ pr_err("unknown ioctl: %x\n", ioctl_num); - return -EINVAL; - } - } - -+#ifdef CONFIG_COMPAT -+static long vcio_device_compat_ioctl(struct file *file, unsigned int ioctl_num, -+ unsigned long ioctl_param) -+{ -+ switch (ioctl_num) { -+ case IOCTL_MBOX_PROPERTY32: -+ return vcio_user_property_list(compat_ptr(ioctl_param)); -+ default: -+ pr_err("unknown ioctl: %x\n", ioctl_num); -+ return -EINVAL; -+ } -+} -+#endif -+ - const struct file_operations vcio_fops = { - .unlocked_ioctl = vcio_device_ioctl, -+#ifdef CONFIG_COMPAT -+ .compat_ioctl = vcio_device_compat_ioctl, -+#endif - .open = vcio_device_open, - .release = vcio_device_release, - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0311-staging-vc-sm-cma-Correct-DMA-configuration.patch b/target/linux/brcm2708/patches-4.19/950-0311-staging-vc-sm-cma-Correct-DMA-configuration.patch new file mode 100644 index 0000000000..8709eef289 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0311-staging-vc-sm-cma-Correct-DMA-configuration.patch @@ -0,0 +1,44 @@ +From ea000a969afa022776bdf8050aaa501b2679e028 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 29 Jan 2019 16:24:41 +0000 +Subject: [PATCH] staging: vc-sm-cma: Correct DMA configuration. + +Now that VCHIQ is setting up the DMA configuration as our +parent device, don't try to configure it during probe. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 15 +++++---------- + 1 file changed, 5 insertions(+), 10 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -703,9 +703,6 @@ err_free_mem: + /* Driver loading. */ + static int bcm2835_vc_sm_cma_probe(struct platform_device *pdev) + { +- struct device *dev = &pdev->dev; +- int err; +- + pr_info("%s: Videocore shared memory driver\n", __func__); + + sm_state = kzalloc(sizeof(*sm_state), GFP_KERNEL); +@@ -714,13 +711,11 @@ static int bcm2835_vc_sm_cma_probe(struc + sm_state->pdev = pdev; + mutex_init(&sm_state->map_lock); + +- dev->coherent_dma_mask = DMA_BIT_MASK(32); +- dev->dma_mask = &dev->coherent_dma_mask; +- err = of_dma_configure(dev, NULL, true); +- if (err) { +- dev_err(dev, "Unable to setup DMA: %d\n", err); +- return err; +- } ++ pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, ++ sizeof(*pdev->dev.dma_parms), ++ GFP_KERNEL); ++ /* dma_set_max_seg_size checks if dma_parms is NULL. */ ++ dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF); + + vchiq_add_connected_callback(vc_sm_connected_init); + return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0312-char-vcio-Fail-probe-if-rpi_firmware-is-not-found.patch b/target/linux/brcm2708/patches-4.19/950-0312-char-vcio-Fail-probe-if-rpi_firmware-is-not-found.patch deleted file mode 100644 index 2aadb3472e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0312-char-vcio-Fail-probe-if-rpi_firmware-is-not-found.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 6880e5c73b75be683299debf391eba4f521cc20f Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 24 Jan 2019 14:03:28 +0000 -Subject: [PATCH 312/806] char: vcio: Fail probe if rpi_firmware is not found. - -Device Tree is now the only supported config mechanism, therefore -uncomment the block of code that fails the probe if the -firmware node can't be found. - -Signed-off-by: Dave Stevenson ---- - drivers/char/broadcom/vcio.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/char/broadcom/vcio.c -+++ b/drivers/char/broadcom/vcio.c -@@ -126,10 +126,9 @@ static int __init vcio_init(void) - - np = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); --/* Uncomment this when we only boot with Device Tree - if (!of_device_is_available(np)) - return -ENODEV; --*/ -+ - vcio.fw = rpi_firmware_get(np); - if (!vcio.fw) - return -ENODEV; diff --git a/target/linux/brcm2708/patches-4.19/950-0312-staging-vc-sm-cma-Use-a-void-pointer-as-the-handle-w.patch b/target/linux/brcm2708/patches-4.19/950-0312-staging-vc-sm-cma-Use-a-void-pointer-as-the-handle-w.patch new file mode 100644 index 0000000000..6a43d94d1a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0312-staging-vc-sm-cma-Use-a-void-pointer-as-the-handle-w.patch @@ -0,0 +1,111 @@ +From df84621e5bd5cc206d1039ce0880ccd0b325525b Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 29 Jan 2019 16:29:00 +0000 +Subject: [PATCH] staging: vc-sm-cma: Use a void* pointer as the handle + within the kernel + +The driver was using an unsigned int as the handle to the outside world, +and doing a nasty cast to the struct dmabuf when handed it back. +This breaks badly with a 64 bit kernel where the pointer doesn't fit +in an unsigned int. + +Switch to using a void* within the kernel. Reality is that it is +a struct dma_buf*, but advertising it as such to other drivers seems +to encourage the use of it as such, and I'm not sure on the implications +of that. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 10 +++++----- + drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h | 6 +++--- + drivers/staging/vc04_services/vchiq-mmal/mmal-common.h | 2 +- + drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 2 +- + 4 files changed, 10 insertions(+), 10 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -745,7 +745,7 @@ static int bcm2835_vc_sm_cma_remove(stru + } + + /* Get an internal resource handle mapped from the external one. */ +-int vc_sm_cma_int_handle(int handle) ++int vc_sm_cma_int_handle(void *handle) + { + struct dma_buf *dma_buf = (struct dma_buf *)handle; + struct vc_sm_buffer *res; +@@ -762,7 +762,7 @@ int vc_sm_cma_int_handle(int handle) + EXPORT_SYMBOL_GPL(vc_sm_cma_int_handle); + + /* Free a previously allocated shared memory handle and block. */ +-int vc_sm_cma_free(int handle) ++int vc_sm_cma_free(void *handle) + { + struct dma_buf *dma_buf = (struct dma_buf *)handle; + +@@ -772,7 +772,7 @@ int vc_sm_cma_free(int handle) + return -EPERM; + } + +- pr_debug("%s: handle %08x/dmabuf %p\n", __func__, handle, dma_buf); ++ pr_debug("%s: handle %p/dmabuf %p\n", __func__, handle, dma_buf); + + dma_buf_put(dma_buf); + +@@ -781,7 +781,7 @@ int vc_sm_cma_free(int handle) + EXPORT_SYMBOL_GPL(vc_sm_cma_free); + + /* Import a dmabuf to be shared with VC. */ +-int vc_sm_cma_import_dmabuf(struct dma_buf *src_dmabuf, int *handle) ++int vc_sm_cma_import_dmabuf(struct dma_buf *src_dmabuf, void **handle) + { + struct dma_buf *new_dma_buf; + struct vc_sm_buffer *res; +@@ -801,7 +801,7 @@ int vc_sm_cma_import_dmabuf(struct dma_b + res = (struct vc_sm_buffer *)new_dma_buf->priv; + + /* Assign valid handle at this time.*/ +- *handle = (int)new_dma_buf; ++ *handle = new_dma_buf; + } else { + /* + * succeeded in importing the dma_buf, but then +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h +@@ -17,12 +17,12 @@ + #endif + + /* Free a previously allocated or imported shared memory handle and block. */ +-int vc_sm_cma_free(int handle); ++int vc_sm_cma_free(void *handle); + + /* Get an internal resource handle mapped from the external one. */ +-int vc_sm_cma_int_handle(int handle); ++int vc_sm_cma_int_handle(void *handle); + + /* Import a block of memory into the GPU space. */ +-int vc_sm_cma_import_dmabuf(struct dma_buf *dmabuf, int *handle); ++int vc_sm_cma_import_dmabuf(struct dma_buf *dmabuf, void **handle); + + #endif /* __VC_SM_KNL_H__INCLUDED__ */ +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h +@@ -52,7 +52,7 @@ struct mmal_buffer { + struct mmal_msg_context *msg_context; + + struct dma_buf *dma_buf;/* Exported dmabuf fd from videobuf2 */ +- int vcsm_handle; /* VCSM handle having imported the dmabuf */ ++ void *vcsm_handle; /* VCSM handle having imported the dmabuf */ + u32 vc_handle; /* VC handle to that dmabuf */ + + u32 cmd; /* MMAL command. 0=data. */ +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -1794,7 +1794,7 @@ int mmal_vchi_buffer_cleanup(struct mmal + if (buf->vcsm_handle) { + int ret; + +- pr_debug("%s: vc_sm_cma_free on handle %08X\n", __func__, ++ pr_debug("%s: vc_sm_cma_free on handle %p\n", __func__, + buf->vcsm_handle); + ret = vc_sm_cma_free(buf->vcsm_handle); + if (ret) diff --git a/target/linux/brcm2708/patches-4.19/950-0313-staging-mmal-vchiq-Fix-client_component-for-64-bit-k.patch b/target/linux/brcm2708/patches-4.19/950-0313-staging-mmal-vchiq-Fix-client_component-for-64-bit-k.patch deleted file mode 100644 index 02a5c62d86..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0313-staging-mmal-vchiq-Fix-client_component-for-64-bit-k.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 18511b66fee5967ed5631e7cbe2c263f07e956f9 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 22 Jan 2019 12:04:09 +0000 -Subject: [PATCH 313/806] staging: mmal-vchiq: Fix client_component for 64 bit - kernel - -The MMAL client_component field is used with the event -mechanism to allow the client to identify the component for -which the event is generated. -The field is only 32bits in size, therefore we can't use a -pointer to the component in a 64 bit kernel. - -Component handles are already held in an array per VCHI -instance, so use the array index as the client_component handle -to avoid having to create a new IDR for this purpose. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 12 +++++++++--- - .../staging/vc04_services/vchiq-mmal/mmal-vchiq.h | 1 + - 2 files changed, 10 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -473,9 +473,9 @@ buffer_from_host(struct vchiq_mmal_insta - static void event_to_host_cb(struct vchiq_mmal_instance *instance, - struct mmal_msg *msg, u32 msg_len) - { -- /* FIXME: Not going to work on 64 bit */ -+ int comp_idx = msg->u.event_to_host.client_component; - struct vchiq_mmal_component *component = -- (struct vchiq_mmal_component *)msg->u.event_to_host.client_component; -+ &instance->component[comp_idx]; - struct vchiq_mmal_port *port = NULL; - struct mmal_msg_context *msg_context; - u32 port_num = msg->u.event_to_host.port_num; -@@ -1074,7 +1074,7 @@ static int create_component(struct vchiq - - /* build component create message */ - m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE; -- m.u.component_create.client_component = (u32)(unsigned long)component; -+ m.u.component_create.client_component = component->client_component; - strncpy(m.u.component_create.name, name, - sizeof(m.u.component_create.name)); - -@@ -1869,6 +1869,12 @@ int vchiq_mmal_component_init(struct vch - goto unlock; - } - -+ /* We need a handle to reference back to our component structure. -+ * Use the array index in instance->component rather than rolling -+ * another IDR. -+ */ -+ component->client_component = idx; -+ - ret = create_component(instance, component, name); - if (ret < 0) { - pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -@@ -97,6 +97,7 @@ struct vchiq_mmal_component { - struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */ - struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */ - struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */ -+ u32 client_component; /* Used to ref back to client struct */ - }; - - int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance); diff --git a/target/linux/brcm2708/patches-4.19/950-0313-staging-vc-sm-cma-Fix-up-for-64bit-builds.patch b/target/linux/brcm2708/patches-4.19/950-0313-staging-vc-sm-cma-Fix-up-for-64bit-builds.patch new file mode 100644 index 0000000000..521641434b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0313-staging-vc-sm-cma-Fix-up-for-64bit-builds.patch @@ -0,0 +1,199 @@ +From 696aa66a971b20e4f00431cb53747f0e4b92bb03 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 29 Jan 2019 16:32:57 +0000 +Subject: [PATCH] staging: vc-sm-cma: Fix up for 64bit builds + +There were a number of logging lines that were using +inappropriate formatting under 64bit kernels. + +The kernel_id field passed to/from the VPU was being +abused for storing the struct vc_sm_buffer *. +This breaks with 64bit kernels, so change to using an IDR. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/vc-sm-cma/vc_sm.c | 60 +++++++++++++++---- + .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 3 +- + 2 files changed, 48 insertions(+), 15 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -75,6 +75,9 @@ struct sm_state_t { + struct miscdevice dev; + struct sm_instance *sm_handle; /* Handle for videocore service. */ + ++ spinlock_t kernelid_map_lock; /* Spinlock protecting kernelid_map */ ++ struct idr kernelid_map; ++ + struct mutex map_lock; /* Global map lock. */ + struct list_head buffer_list; /* List of buffer. */ + +@@ -97,6 +100,29 @@ static int sm_inited; + + /* ---- Private Functions ------------------------------------------------ */ + ++static int get_kernel_id(struct vc_sm_buffer *buffer) ++{ ++ int handle; ++ ++ spin_lock(&sm_state->kernelid_map_lock); ++ handle = idr_alloc(&sm_state->kernelid_map, buffer, 0, 0, GFP_KERNEL); ++ spin_unlock(&sm_state->kernelid_map_lock); ++ ++ return handle; ++} ++ ++static struct vc_sm_buffer *lookup_kernel_id(int handle) ++{ ++ return idr_find(&sm_state->kernelid_map, handle); ++} ++ ++static void free_kernel_id(int handle) ++{ ++ spin_lock(&sm_state->kernelid_map_lock); ++ idr_remove(&sm_state->kernelid_map, handle); ++ spin_unlock(&sm_state->kernelid_map_lock); ++} ++ + static int vc_sm_cma_seq_file_show(struct seq_file *s, void *v) + { + struct sm_pde_t *sm_pde; +@@ -129,8 +155,7 @@ static int vc_sm_cma_global_state_show(s + if (!sm_state) + return 0; + +- seq_printf(s, "\nVC-ServiceHandle 0x%x\n", +- (unsigned int)sm_state->sm_handle); ++ seq_printf(s, "\nVC-ServiceHandle %p\n", sm_state->sm_handle); + + /* Log all applicable mapping(s). */ + +@@ -145,7 +170,7 @@ static int vc_sm_cma_global_state_show(s + resource); + seq_printf(s, " NAME %s\n", + resource->name); +- seq_printf(s, " SIZE %d\n", ++ seq_printf(s, " SIZE %zu\n", + resource->size); + seq_printf(s, " DMABUF %p\n", + resource->dma_buf); +@@ -181,7 +206,7 @@ static void vc_sm_add_resource(struct vc + list_add(&buffer->global_buffer_list, &sm_state->buffer_list); + mutex_unlock(&sm_state->map_lock); + +- pr_debug("[%s]: added buffer %p (name %s, size %d)\n", ++ pr_debug("[%s]: added buffer %p (name %s, size %zu)\n", + __func__, buffer, buffer->name, buffer->size); + } + +@@ -194,7 +219,7 @@ static void vc_sm_release_resource(struc + mutex_lock(&sm_state->map_lock); + mutex_lock(&buffer->lock); + +- pr_debug("[%s]: buffer %p (name %s, size %d)\n", ++ pr_debug("[%s]: buffer %p (name %s, size %zu)\n", + __func__, buffer, buffer->name, buffer->size); + + if (buffer->vc_handle && buffer->vpu_state == VPU_MAPPED) { +@@ -443,6 +468,7 @@ vc_sm_cma_import_dmabuf_internal(struct + struct vc_sm_import_result result = { }; + struct dma_buf_attachment *attach = NULL; + struct sg_table *sgt = NULL; ++ dma_addr_t dma_addr; + int ret = 0; + int status; + +@@ -478,21 +504,22 @@ vc_sm_cma_import_dmabuf_internal(struct + } + + import.type = VC_SM_ALLOC_NON_CACHED; +- import.addr = (uint32_t)sg_dma_address(sgt->sgl); ++ dma_addr = sg_dma_address(sgt->sgl); ++ import.addr = (uint32_t)dma_addr; + if ((import.addr & 0xC0000000) != 0xC0000000) { +- pr_err("%s: Expecting an uncached alias for dma_addr %08x\n", +- __func__, import.addr); ++ pr_err("%s: Expecting an uncached alias for dma_addr %pad\n", ++ __func__, &dma_addr); + import.addr |= 0xC0000000; + } + import.size = sg_dma_len(sgt->sgl); + import.allocator = current->tgid; +- import.kernel_id = (uint32_t)buffer; //FIXME: 64 bit support needed. ++ import.kernel_id = get_kernel_id(buffer); + + memcpy(import.name, VC_SM_RESOURCE_NAME_DEFAULT, + sizeof(VC_SM_RESOURCE_NAME_DEFAULT)); + +- pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %p, size %u\n", +- __func__, import.name, import.type, (void *)import.addr, ++ pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %pad, size %u\n", ++ __func__, import.name, import.type, &dma_addr, + import.size); + + /* Allocate the videocore buffer. */ +@@ -527,7 +554,7 @@ vc_sm_cma_import_dmabuf_internal(struct + + buffer->attach = attach; + buffer->sgt = sgt; +- buffer->dma_addr = sg_dma_address(sgt->sgl); ++ buffer->dma_addr = dma_addr; + buffer->in_use = 1; + + /* +@@ -559,6 +586,7 @@ error: + vc_sm_cma_vchi_free(sm_state->sm_handle, &free, + &sm_state->int_trans_id); + } ++ free_kernel_id(import.kernel_id); + kfree(buffer); + if (sgt) + dma_buf_unmap_attachment(attach, sgt, DMA_BIDIRECTIONAL); +@@ -586,7 +614,7 @@ vc_sm_vpu_event(struct sm_instance *inst + { + struct vc_sm_released *release = (struct vc_sm_released *)reply; + struct vc_sm_buffer *buffer = +- (struct vc_sm_buffer *)release->kernel_id; ++ lookup_kernel_id(release->kernel_id); + + /* + * FIXME: Need to check buffer is still valid and allocated +@@ -599,6 +627,7 @@ vc_sm_vpu_event(struct sm_instance *inst + buffer->vc_handle = 0; + buffer->vpu_state = VPU_NOT_MAPPED; + mutex_unlock(&buffer->lock); ++ free_kernel_id(release->kernel_id); + + vc_sm_release_resource(buffer, 0); + } +@@ -711,6 +740,9 @@ static int bcm2835_vc_sm_cma_probe(struc + sm_state->pdev = pdev; + mutex_init(&sm_state->map_lock); + ++ spin_lock_init(&sm_state->kernelid_map_lock); ++ idr_init_base(&sm_state->kernelid_map, 1); ++ + pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, + sizeof(*pdev->dev.dma_parms), + GFP_KERNEL); +@@ -735,6 +767,8 @@ static int bcm2835_vc_sm_cma_remove(stru + /* Stop the videocore shared memory service. */ + vc_sm_cma_vchi_stop(&sm_state->sm_handle); + ++ idr_destroy(&sm_state->kernelid_map); ++ + /* Free the memory for the state structure. */ + mutex_destroy(&sm_state->map_lock); + kfree(sm_state); +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c +@@ -356,8 +356,7 @@ struct sm_instance *vc_sm_cma_vchi_init( + set_user_nice(instance->io_thread, -10); + wake_up_process(instance->io_thread); + +- pr_debug("%s: success - instance 0x%x", __func__, +- (unsigned int)instance); ++ pr_debug("%s: success - instance %p", __func__, instance); + return instance; + + err_close_services: diff --git a/target/linux/brcm2708/patches-4.19/950-0314-configs-Enable-the-AD193x-codecs.patch b/target/linux/brcm2708/patches-4.19/950-0314-configs-Enable-the-AD193x-codecs.patch new file mode 100644 index 0000000000..29f7ee3984 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0314-configs-Enable-the-AD193x-codecs.patch @@ -0,0 +1,28 @@ +From 3ffbec3df726c6d36ef728d476cb3ff3fcc17c81 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 7 Feb 2019 18:16:25 +0000 +Subject: [PATCH] configs: Enable the AD193x codecs + +See: https://github.com/raspberrypi/linux/issues/2850 + +Signed-off-by: Phil Elwell +--- + sound/soc/codecs/Kconfig | 4 ++-- + 4 files changed, 8 insertions(+), 2 deletions(-) + +--- a/sound/soc/codecs/Kconfig ++++ b/sound/soc/codecs/Kconfig +@@ -295,11 +295,11 @@ config SND_SOC_AD193X + tristate + + config SND_SOC_AD193X_SPI +- tristate ++ tristate "Analog Devices AU193X CODEC - SPI" + select SND_SOC_AD193X + + config SND_SOC_AD193X_I2C +- tristate ++ tristate "Analog Devices AU193X CODEC - I2C" + select SND_SOC_AD193X + + config SND_SOC_AD1980 diff --git a/target/linux/brcm2708/patches-4.19/950-0314-staging-bcm2835-camera-Add-sanity-checks-for-queue_s.patch b/target/linux/brcm2708/patches-4.19/950-0314-staging-bcm2835-camera-Add-sanity-checks-for-queue_s.patch deleted file mode 100644 index fadb149367..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0314-staging-bcm2835-camera-Add-sanity-checks-for-queue_s.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 6b3fde1207785584dbd1fdf65110cf60bd29b409 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 15 Jan 2019 15:35:24 +0000 -Subject: [PATCH 314/806] staging: bcm2835-camera: Add sanity checks for - queue_setup/CREATE_BUFS - -Fixes a v4l2-compliance failure when passed a buffer that is -too small. -queue_setup wasn't handling the case where !(*nplanes), as -used from CREATE_BUFS and requiring the driver to sanity -check the provided buffer parameters. It was assuming that -it was always being used in the REQBUFS case where it provides -the buffer properties. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-camera/bcm2835-camera.c | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -242,6 +242,22 @@ static int queue_setup(struct vb2_queue - return -EINVAL; - } - -+ /* Handle CREATE_BUFS situation - *nplanes != 0 */ -+ if (*nplanes) { -+ if (*nplanes != 1 || -+ sizes[0] < dev->capture.port->current_buffer.size) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "%s: dev:%p Invalid buffer request from CREATE_BUFS, size %u < %u, nplanes %u != 1\n", -+ __func__, dev, sizes[0], -+ dev->capture.port->current_buffer.size, -+ *nplanes); -+ return -EINVAL; -+ } else { -+ return 0; -+ } -+ } -+ -+ /* Handle REQBUFS situation */ - size = dev->capture.port->current_buffer.size; - if (size == 0) { - v4l2_err(&dev->v4l2_dev, diff --git a/target/linux/brcm2708/patches-4.19/950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch b/target/linux/brcm2708/patches-4.19/950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch new file mode 100644 index 0000000000..4dc414119b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch @@ -0,0 +1,109 @@ +From 6cafe647492605d21c2418b6261bf3182b9229f2 Mon Sep 17 00:00:00 2001 +From: Zahari Petkov +Date: Fri, 8 Feb 2019 13:03:38 +0200 +Subject: [PATCH] overlays: balenaFin v1.1.0 carrier board update + +A backward compatible update for the balenaFin carrier board for the +Raspberry Pi Compute Module 3/3+ Lite. + +The updated overlay includes: + * support for the newly introduced RGB LEDs + * i2c-gpio and SDIO improvements + * DT based Marvell 88W8887 configuration + +Signed-off-by: Zahari Petkov +--- + arch/arm/boot/dts/overlays/README | 2 +- + .../boot/dts/overlays/balena-fin-overlay.dts | 46 ++++++++++++++++++- + 2 files changed, 45 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -472,7 +472,7 @@ Params: swap_lr Reverse + + Name: balena-fin + Info: Overlay that enables WiFi, Bluetooth and the GPIO expander on the +- Balena Fin board. ++ balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite. + Load: dtoverlay=balena-fin + Params: + +--- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts ++++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts +@@ -11,6 +11,7 @@ + pinctrl-0 = <&sdio_pins>; + bus-width = <4>; + brcm,overclock-50 = <35>; ++ non-removable; + status = "okay"; + }; + }; +@@ -34,7 +35,8 @@ + fragment@2 { + target-path = "/"; + __overlay__ { +- // We should investigate how to switch to mmc-pwrseq-sd8787 ++ // We should switch to mmc-pwrseq-sd8787 after making it ++ // compatible with sd8887 + // Currently that module requires two GPIOs to function since it + // targets a slightly different chip + power_ctrl: power_ctrl { +@@ -46,10 +48,21 @@ + i2c_soft: i2c@0 { + compatible = "i2c-gpio"; + gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>; +- i2c-gpio,delay-us = <2>; /* ~100 kHz */ ++ i2c-gpio,delay-us = <5>; ++ i2c-gpio,scl-open-drain; ++ i2c-gpio,sda-open-drain; + #address-cells = <1>; + #size-cells = <0>; + }; ++ ++ sd8xxx-wlan { ++ drvdbg = <0x6>; ++ drv_mode = <0x1>; ++ cfg80211_wext = <0xf>; ++ sta_name = "wlan"; ++ wfd_name = "p2p"; ++ cal_data_cfg = "none"; ++ }; + }; + }; + +@@ -74,6 +87,35 @@ + reg = <0x68>; + status = "okay"; + }; ++ ++ // RGB LEDs (>= v1.1.0) ++ pca9633: pca9633@62 { ++ compatible = "nxp,pca9633"; ++ reg = <0x62>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ red@0 { ++ label = "red"; ++ reg = <0>; ++ linux,default-trigger = "none"; ++ }; ++ green@1 { ++ label = "green"; ++ reg = <1>; ++ linux,default-trigger = "none"; ++ }; ++ blue@2 { ++ label = "blue"; ++ reg = <2>; ++ linux,default-trigger = "none"; ++ }; ++ unused@3 { ++ label = "unused"; ++ reg = <3>; ++ linux,default-trigger = "none"; ++ }; ++ }; + }; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0315-staging-bcm2835-camera-Set-the-field-value-within-ea.patch b/target/linux/brcm2708/patches-4.19/950-0315-staging-bcm2835-camera-Set-the-field-value-within-ea.patch deleted file mode 100644 index 46cbbba5e3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0315-staging-bcm2835-camera-Set-the-field-value-within-ea.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 7f67e8ed8ae17ddca0748975de0c0efad6a5e6bb Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 15 Jan 2019 16:32:33 +0000 -Subject: [PATCH 315/806] staging: bcm2835-camera: Set the field value within - each buffer - -Fixes a v4l2-compliance failure -v4l2-test-buffers.cpp(415): g_field() == V4L2_FIELD_ANY - -The driver only ever produces progresive frames, so field should -always be set to V4L2_FIELD_NONE. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c -@@ -443,6 +443,7 @@ static void buffer_cb(struct vchiq_mmal_ - } - dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; - buf->vb.sequence = dev->capture.sequence++; -+ buf->vb.field = V4L2_FIELD_NONE; - - vb2_set_plane_payload(&buf->vb.vb2_buf, 0, mmal_buf->length); - if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) diff --git a/target/linux/brcm2708/patches-4.19/950-0316-char-vc_mem-Fix-up-compat-ioctls-for-64bit-kernel.patch b/target/linux/brcm2708/patches-4.19/950-0316-char-vc_mem-Fix-up-compat-ioctls-for-64bit-kernel.patch deleted file mode 100644 index 866512859e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0316-char-vc_mem-Fix-up-compat-ioctls-for-64bit-kernel.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 966ff2b4c758eb8c8c04f26422cd183e6aa8eda5 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 23 Jan 2019 18:25:50 +0000 -Subject: [PATCH 316/806] char: vc_mem: Fix up compat ioctls for 64bit kernel - -compat_ioctl wasn't defined, so 32bit user/64bit kernel -always failed. -VC_MEM_IOC_MEM_PHYS_ADDR was defined with parameter size -unsigned long, so the ioctl cmd changes between sizes. - -Signed-off-by: Dave Stevenson ---- - drivers/char/broadcom/vc_mem.c | 40 +++++++++++++++++++++++++++++---- - include/linux/broadcom/vc_mem.h | 4 ++++ - 2 files changed, 40 insertions(+), 4 deletions(-) - ---- a/drivers/char/broadcom/vc_mem.c -+++ b/drivers/char/broadcom/vc_mem.c -@@ -148,7 +148,7 @@ vc_mem_ioctl(struct file *file, unsigned - (void) cmd; - (void) arg; - -- pr_debug("%s: called file = 0x%p\n", __func__, file); -+ pr_debug("%s: called file = 0x%p, cmd %08x\n", __func__, file, cmd); - - switch (cmd) { - case VC_MEM_IOC_MEM_PHYS_ADDR: -@@ -167,7 +167,7 @@ vc_mem_ioctl(struct file *file, unsigned - // Get the videocore memory size first - vc_mem_get_size(); - -- pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%u\n", __func__, -+ pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%x\n", __func__, - mm_vc_mem_size); - - if (copy_to_user((void *) arg, &mm_vc_mem_size, -@@ -181,7 +181,7 @@ vc_mem_ioctl(struct file *file, unsigned - // Get the videocore memory base - vc_mem_get_base(); - -- pr_debug("%s: VC_MEM_IOC_MEM_BASE=%u\n", __func__, -+ pr_debug("%s: VC_MEM_IOC_MEM_BASE=%x\n", __func__, - mm_vc_mem_base); - - if (copy_to_user((void *) arg, &mm_vc_mem_base, -@@ -195,7 +195,7 @@ vc_mem_ioctl(struct file *file, unsigned - // Get the videocore memory base - vc_mem_get_base(); - -- pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%u\n", __func__, -+ pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%x\n", __func__, - mm_vc_mem_base); - - if (copy_to_user((void *) arg, &mm_vc_mem_base, -@@ -214,6 +214,35 @@ vc_mem_ioctl(struct file *file, unsigned - return rc; - } - -+#ifdef CONFIG_COMPAT -+static long -+vc_mem_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int rc = 0; -+ -+ switch (cmd) { -+ case VC_MEM_IOC_MEM_PHYS_ADDR32: -+ pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR32=0x%p\n", -+ __func__, (void *)mm_vc_mem_phys_addr); -+ -+ /* This isn't correct, but will cover us for now as -+ * VideoCore is 32bit only. -+ */ -+ if (copy_to_user((void *)arg, &mm_vc_mem_phys_addr, -+ sizeof(compat_ulong_t))) -+ rc = -EFAULT; -+ -+ break; -+ -+ default: -+ rc = vc_mem_ioctl(file, cmd, arg); -+ break; -+ } -+ -+ return rc; -+} -+#endif -+ - /**************************************************************************** - * - * vc_mem_mmap -@@ -259,6 +288,9 @@ static const struct file_operations vc_m - .open = vc_mem_open, - .release = vc_mem_release, - .unlocked_ioctl = vc_mem_ioctl, -+#ifdef CONFIG_COMPAT -+ .compat_ioctl = vc_mem_compat_ioctl, -+#endif - .mmap = vc_mem_mmap, - }; - ---- a/include/linux/broadcom/vc_mem.h -+++ b/include/linux/broadcom/vc_mem.h -@@ -32,4 +32,8 @@ extern unsigned int mm_vc_mem_size; - extern int vc_mem_get_current_size( void ); - #endif - -+#ifdef CONFIG_COMPAT -+#define VC_MEM_IOC_MEM_PHYS_ADDR32 _IOR(VC_MEM_IOC_MAGIC, 0, compat_ulong_t) -+#endif -+ - #endif /* _VC_MEM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0316-gpu-vc4-fkms-Update-driver-to-not-use-plane-crtc.patch b/target/linux/brcm2708/patches-4.19/950-0316-gpu-vc4-fkms-Update-driver-to-not-use-plane-crtc.patch new file mode 100644 index 0000000000..b4567d8fdc --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0316-gpu-vc4-fkms-Update-driver-to-not-use-plane-crtc.patch @@ -0,0 +1,36 @@ +From e5285033e0fbfb6750d7d39e7edebf67a16c8434 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 19 Feb 2019 15:06:31 +0000 +Subject: [PATCH] gpu:vc4-fkms: Update driver to not use plane->crtc. + +Following on from +commit 2f958af7fc248 ("drm/vc4: Stop updating plane->fb/crtc") +do the same in the firmwarekms driver and look at plane_state->crtc +instead. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -193,8 +193,8 @@ static void vc4_cursor_plane_atomic_upda + struct drm_plane_state *old_state) + { + struct vc4_dev *vc4 = to_vc4_dev(plane->dev); +- struct vc4_crtc *vc4_crtc = to_vc4_crtc(plane->crtc); + struct drm_plane_state *state = plane->state; ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); + struct drm_framebuffer *fb = state->fb; + struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); + dma_addr_t addr = bo->paddr + fb->offsets[0]; +@@ -682,8 +682,6 @@ static int vc4_fkms_bind(struct device * + drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane, + &vc4_crtc_funcs, NULL); + drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); +- primary_plane->crtc = crtc; +- cursor_plane->crtc = crtc; + + vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); + if (!vc4_encoder) diff --git a/target/linux/brcm2708/patches-4.19/950-0317-char-vc_mem-Fix-all-coding-style-issues.patch b/target/linux/brcm2708/patches-4.19/950-0317-char-vc_mem-Fix-all-coding-style-issues.patch deleted file mode 100644 index 815900409d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0317-char-vc_mem-Fix-all-coding-style-issues.patch +++ /dev/null @@ -1,428 +0,0 @@ -From 8d64f178c3568d212f3ddf05ea1ad7f103beeb86 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 23 Jan 2019 18:37:29 +0000 -Subject: [PATCH 317/806] char: vc_mem: Fix all coding style issues. - -Cleans up all checkpatch errors in vc_mem.c and vc_mem.h -No functional change to the code. - -Signed-off-by: Dave Stevenson ---- - drivers/char/broadcom/vc_mem.c | 177 +++++++++++--------------------- - include/linux/broadcom/vc_mem.h | 38 +++---- - 2 files changed, 77 insertions(+), 138 deletions(-) - ---- a/drivers/char/broadcom/vc_mem.c -+++ b/drivers/char/broadcom/vc_mem.c -@@ -1,16 +1,16 @@ --/***************************************************************************** --* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. --* --* Unless you and Broadcom execute a separate written software license --* agreement governing use of this software, this software is licensed to you --* under the terms of the GNU General Public License version 2, available at --* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). --* --* Notwithstanding the above, under no circumstances may you combine this --* software in any way with any other Broadcom software provided under a --* license other than the GPL, without Broadcom's express prior written --* consent. --*****************************************************************************/ -+/* -+ * Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. -+ * -+ * Unless you and Broadcom execute a separate written software license -+ * agreement governing use of this software, this software is licensed to you -+ * under the terms of the GNU General Public License version 2, available at -+ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+ * -+ * Notwithstanding the above, under no circumstances may you combine this -+ * software in any way with any other Broadcom software provided under a -+ * license other than the GPL, without Broadcom's express prior written -+ * consent. -+ */ - - #include - #include -@@ -26,11 +26,11 @@ - - #define DRIVER_NAME "vc-mem" - --// Device (/dev) related variables --static dev_t vc_mem_devnum = 0; --static struct class *vc_mem_class = NULL; -+/* Device (/dev) related variables */ -+static dev_t vc_mem_devnum; -+static struct class *vc_mem_class; - static struct cdev vc_mem_cdev; --static int vc_mem_inited = 0; -+static int vc_mem_inited; - - #ifdef CONFIG_DEBUG_FS - static struct dentry *vc_mem_debugfs_entry; -@@ -50,96 +50,55 @@ static struct dentry *vc_mem_debugfs_ent - * bootloader (and/or kernel). When that happens, the values of these variables - * would be calculated and assigned in the init function. - */ --// in the 2835 VC in mapped above ARM, but ARM has full access to VC space --unsigned long mm_vc_mem_phys_addr = 0x00000000; --unsigned int mm_vc_mem_size = 0; --unsigned int mm_vc_mem_base = 0; -- -+/* In the 2835 VC in mapped above ARM, but ARM has full access to VC space */ -+unsigned long mm_vc_mem_phys_addr; - EXPORT_SYMBOL(mm_vc_mem_phys_addr); -+unsigned int mm_vc_mem_size; - EXPORT_SYMBOL(mm_vc_mem_size); -+unsigned int mm_vc_mem_base; - EXPORT_SYMBOL(mm_vc_mem_base); - --static uint phys_addr = 0; --static uint mem_size = 0; --static uint mem_base = 0; -- -- --/**************************************************************************** --* --* vc_mem_open --* --***************************************************************************/ -+static uint phys_addr; -+static uint mem_size; -+static uint mem_base; - - static int - vc_mem_open(struct inode *inode, struct file *file) - { -- (void) inode; -- (void) file; -+ (void)inode; - - pr_debug("%s: called file = 0x%p\n", __func__, file); - - return 0; - } - --/**************************************************************************** --* --* vc_mem_release --* --***************************************************************************/ -- - static int - vc_mem_release(struct inode *inode, struct file *file) - { -- (void) inode; -- (void) file; -+ (void)inode; - - pr_debug("%s: called file = 0x%p\n", __func__, file); - - return 0; - } - --/**************************************************************************** --* --* vc_mem_get_size --* --***************************************************************************/ -- - static void - vc_mem_get_size(void) - { - } - --/**************************************************************************** --* --* vc_mem_get_base --* --***************************************************************************/ -- - static void - vc_mem_get_base(void) - { - } - --/**************************************************************************** --* --* vc_mem_get_current_size --* --***************************************************************************/ -- - int - vc_mem_get_current_size(void) - { - return mm_vc_mem_size; - } -- - EXPORT_SYMBOL_GPL(vc_mem_get_current_size); - --/**************************************************************************** --* --* vc_mem_ioctl --* --***************************************************************************/ -- - static long - vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) - { -@@ -154,52 +113,52 @@ vc_mem_ioctl(struct file *file, unsigned - case VC_MEM_IOC_MEM_PHYS_ADDR: - { - pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p\n", -- __func__, (void *) mm_vc_mem_phys_addr); -+ __func__, (void *)mm_vc_mem_phys_addr); - -- if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr, -- sizeof (mm_vc_mem_phys_addr)) != 0) { -+ if (copy_to_user((void *)arg, &mm_vc_mem_phys_addr, -+ sizeof(mm_vc_mem_phys_addr))) { - rc = -EFAULT; - } - break; - } - case VC_MEM_IOC_MEM_SIZE: - { -- // Get the videocore memory size first -+ /* Get the videocore memory size first */ - vc_mem_get_size(); - - pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%x\n", __func__, -- mm_vc_mem_size); -+ mm_vc_mem_size); - -- if (copy_to_user((void *) arg, &mm_vc_mem_size, -- sizeof (mm_vc_mem_size)) != 0) { -+ if (copy_to_user((void *)arg, &mm_vc_mem_size, -+ sizeof(mm_vc_mem_size))) { - rc = -EFAULT; - } - break; - } - case VC_MEM_IOC_MEM_BASE: - { -- // Get the videocore memory base -+ /* Get the videocore memory base */ - vc_mem_get_base(); - - pr_debug("%s: VC_MEM_IOC_MEM_BASE=%x\n", __func__, -- mm_vc_mem_base); -+ mm_vc_mem_base); - -- if (copy_to_user((void *) arg, &mm_vc_mem_base, -- sizeof (mm_vc_mem_base)) != 0) { -+ if (copy_to_user((void *)arg, &mm_vc_mem_base, -+ sizeof(mm_vc_mem_base))) { - rc = -EFAULT; - } - break; - } - case VC_MEM_IOC_MEM_LOAD: - { -- // Get the videocore memory base -+ /* Get the videocore memory base */ - vc_mem_get_base(); - - pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%x\n", __func__, - mm_vc_mem_base); - -- if (copy_to_user((void *) arg, &mm_vc_mem_base, -- sizeof (mm_vc_mem_base)) != 0) { -+ if (copy_to_user((void *)arg, &mm_vc_mem_base, -+ sizeof(mm_vc_mem_base))) { - rc = -EFAULT; - } - break; -@@ -243,12 +202,6 @@ vc_mem_compat_ioctl(struct file *file, u - } - #endif - --/**************************************************************************** --* --* vc_mem_mmap --* --***************************************************************************/ -- - static int - vc_mem_mmap(struct file *filp, struct vm_area_struct *vma) - { -@@ -257,32 +210,26 @@ vc_mem_mmap(struct file *filp, struct vm - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - - pr_debug("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx\n", -- __func__, (long) vma->vm_start, (long) vma->vm_end, -- (long) vma->vm_pgoff); -+ __func__, (long)vma->vm_start, (long)vma->vm_end, -+ (long)vma->vm_pgoff); - - if (offset + length > mm_vc_mem_size) { - pr_err("%s: length %ld is too big\n", __func__, length); - return -EINVAL; - } -- // Do not cache the memory map -+ /* Do not cache the memory map */ - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - - rc = remap_pfn_range(vma, vma->vm_start, - (mm_vc_mem_phys_addr >> PAGE_SHIFT) + - vma->vm_pgoff, length, vma->vm_page_prot); -- if (rc != 0) { -+ if (rc) - pr_err("%s: remap_pfn_range failed (rc=%d)\n", __func__, rc); -- } - - return rc; - } - --/**************************************************************************** --* --* File Operations for the driver. --* --***************************************************************************/ -- -+/* File Operations for the driver. */ - static const struct file_operations vc_mem_fops = { - .owner = THIS_MODULE, - .open = vc_mem_open, -@@ -316,7 +263,7 @@ static int vc_mem_debugfs_init( - vc_mem_debugfs_entry, - (u32 *)&mm_vc_mem_phys_addr)) { - dev_warn(dev, "%s:could not create vc_mem_phys entry\n", -- __func__); -+ __func__); - goto fail; - } - -@@ -325,7 +272,7 @@ static int vc_mem_debugfs_init( - vc_mem_debugfs_entry, - (u32 *)&mm_vc_mem_size)) { - dev_warn(dev, "%s:could not create vc_mem_size entry\n", -- __func__); -+ __func__); - goto fail; - } - -@@ -347,12 +294,7 @@ fail: - - #endif /* CONFIG_DEBUG_FS */ - -- --/**************************************************************************** --* --* vc_mem_init --* --***************************************************************************/ -+/* Module load/unload functions */ - - static int __init - vc_mem_init(void) -@@ -369,16 +311,19 @@ vc_mem_init(void) - vc_mem_get_size(); - - pr_info("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n", -- mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024)); -+ mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, -+ mm_vc_mem_size / (1024 * 1024)); - -- if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) { -+ rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME); -+ if (rc < 0) { - pr_err("%s: alloc_chrdev_region failed (rc=%d)\n", - __func__, rc); - goto out_err; - } - - cdev_init(&vc_mem_cdev, &vc_mem_fops); -- if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) { -+ rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1); -+ if (rc) { - pr_err("%s: cdev_add failed (rc=%d)\n", __func__, rc); - goto out_unregister; - } -@@ -408,26 +353,20 @@ vc_mem_init(void) - - device_destroy(vc_mem_class, vc_mem_devnum); - -- out_class_destroy: -+out_class_destroy: - class_destroy(vc_mem_class); - vc_mem_class = NULL; - -- out_cdev_del: -+out_cdev_del: - cdev_del(&vc_mem_cdev); - -- out_unregister: -+out_unregister: - unregister_chrdev_region(vc_mem_devnum, 1); - -- out_err: -+out_err: - return -1; - } - --/**************************************************************************** --* --* vc_mem_exit --* --***************************************************************************/ -- - static void __exit - vc_mem_exit(void) - { ---- a/include/linux/broadcom/vc_mem.h -+++ b/include/linux/broadcom/vc_mem.h -@@ -1,16 +1,16 @@ --/***************************************************************************** --* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. --* --* Unless you and Broadcom execute a separate written software license --* agreement governing use of this software, this software is licensed to you --* under the terms of the GNU General Public License version 2, available at --* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). --* --* Notwithstanding the above, under no circumstances may you combine this --* software in any way with any other Broadcom software provided under a --* license other than the GPL, without Broadcom's express prior written --* consent. --*****************************************************************************/ -+/* -+ * Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. -+ * -+ * Unless you and Broadcom execute a separate written software license -+ * agreement governing use of this software, this software is licensed to you -+ * under the terms of the GNU General Public License version 2, available at -+ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+ * -+ * Notwithstanding the above, under no circumstances may you combine this -+ * software in any way with any other Broadcom software provided under a -+ * license other than the GPL, without Broadcom's express prior written -+ * consent. -+ */ - - #ifndef _VC_MEM_H - #define _VC_MEM_H -@@ -19,17 +19,17 @@ - - #define VC_MEM_IOC_MAGIC 'v' - --#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long ) --#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int ) --#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int ) --#define VC_MEM_IOC_MEM_LOAD _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int ) -+#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR(VC_MEM_IOC_MAGIC, 0, unsigned long) -+#define VC_MEM_IOC_MEM_SIZE _IOR(VC_MEM_IOC_MAGIC, 1, unsigned int) -+#define VC_MEM_IOC_MEM_BASE _IOR(VC_MEM_IOC_MAGIC, 2, unsigned int) -+#define VC_MEM_IOC_MEM_LOAD _IOR(VC_MEM_IOC_MAGIC, 3, unsigned int) - --#if defined( __KERNEL__ ) -+#ifdef __KERNEL__ - #define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF - - extern unsigned long mm_vc_mem_phys_addr; - extern unsigned int mm_vc_mem_size; --extern int vc_mem_get_current_size( void ); -+extern int vc_mem_get_current_size(void); - #endif - - #ifdef CONFIG_COMPAT diff --git a/target/linux/brcm2708/patches-4.19/950-0317-drm-vc4-Programming-the-CTM-is-conditional-on-runnin.patch b/target/linux/brcm2708/patches-4.19/950-0317-drm-vc4-Programming-the-CTM-is-conditional-on-runnin.patch new file mode 100644 index 0000000000..6690dfcd42 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0317-drm-vc4-Programming-the-CTM-is-conditional-on-runnin.patch @@ -0,0 +1,26 @@ +From bb8e85deab20dd38c26d354452e1ac42add37530 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 19 Feb 2019 15:18:25 +0000 +Subject: [PATCH] drm: vc4: Programming the CTM is conditional on + running full KMS + +vc4_ctm_commit writes to HVS registers, so this is only applicable +when in full KMS mode, not in firmware KMS mode. Add this conditional. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_kms.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -147,7 +147,8 @@ vc4_atomic_complete_commit(struct drm_at + + drm_atomic_helper_commit_modeset_disables(dev, state); + +- vc4_ctm_commit(vc4, state); ++ if (!vc4->firmware_kms) ++ vc4_ctm_commit(vc4, state); + + drm_atomic_helper_commit_planes(dev, state, 0); + diff --git a/target/linux/brcm2708/patches-4.19/950-0318-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch b/target/linux/brcm2708/patches-4.19/950-0318-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch deleted file mode 100644 index bb7c5b0173..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0318-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 83a7175c91133a3e7a746693847b447bf6297094 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 24 Jan 2019 15:09:28 +0000 -Subject: [PATCH 318/806] clk: clk-bcm2835: Use %zd when printing size_t - -The debug text for how many clocks have been registered -uses "%d" with a size_t. Correct it to "%zd". - -Signed-off-by: Dave Stevenson ---- - drivers/clk/bcm/clk-bcm2835.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -2271,7 +2271,7 @@ static int bcm2835_clk_probe(struct plat - return ret; - - /* note that we have registered all the clocks */ -- dev_dbg(dev, "registered %d clocks\n", asize); -+ dev_dbg(dev, "registered %zd clocks\n", asize); - - return 0; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0318-staging-mmal_vchiq-Add-in-the-Bayer-encoding-formats.patch b/target/linux/brcm2708/patches-4.19/950-0318-staging-mmal_vchiq-Add-in-the-Bayer-encoding-formats.patch new file mode 100644 index 0000000000..1280251403 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0318-staging-mmal_vchiq-Add-in-the-Bayer-encoding-formats.patch @@ -0,0 +1,51 @@ +From 39c4b77533bee8d88d2f4c9be9463041ec1dd483 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 13 Feb 2019 12:33:29 +0000 +Subject: [PATCH] staging: mmal_vchiq: Add in the Bayer encoding + formats + +The list of formats was copied before Bayer support was added. +The ISP supports Bayer and is being supported by the bcm2835_codec +driver, so add in the encodings for them. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/vchiq-mmal/mmal-encodings.h | 27 +++++++++++++++++++ + 1 file changed, 27 insertions(+) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-encodings.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-encodings.h +@@ -69,6 +69,33 @@ + */ + #define MMAL_ENCODING_OPAQUE MMAL_FOURCC('O', 'P', 'Q', 'V') + ++/* Bayer formats ++ * FourCC values copied from V4L2 where defined. ++ */ ++/* 8 bit per pixel Bayer formats. */ ++#define MMAL_ENCODING_BAYER_SBGGR8 MMAL_FOURCC('B', 'A', '8', '1') ++#define MMAL_ENCODING_BAYER_SGBRG8 MMAL_FOURCC('G', 'B', 'R', 'G') ++#define MMAL_ENCODING_BAYER_SGRBG8 MMAL_FOURCC('G', 'R', 'B', 'G') ++#define MMAL_ENCODING_BAYER_SRGGB8 MMAL_FOURCC('R', 'G', 'G', 'B') ++ ++/* 10 bit per pixel packed Bayer formats. */ ++#define MMAL_ENCODING_BAYER_SBGGR10P MMAL_FOURCC('p', 'B', 'A', 'A') ++#define MMAL_ENCODING_BAYER_SGRBG10P MMAL_FOURCC('p', 'g', 'A', 'A') ++#define MMAL_ENCODING_BAYER_SGBRG10P MMAL_FOURCC('p', 'G', 'A', 'A') ++#define MMAL_ENCODING_BAYER_SRGGB10P MMAL_FOURCC('p', 'R', 'A', 'A') ++ ++/* 12 bit per pixel packed Bayer formats. */ ++#define MMAL_ENCODING_BAYER_SBGGR12P MMAL_FOURCC('p', 'B', '1', '2') ++#define MMAL_ENCODING_BAYER_SGRBG12P MMAL_FOURCC('p', 'g', '1', '2') ++#define MMAL_ENCODING_BAYER_SGBRG12P MMAL_FOURCC('p', 'G', '1', '2') ++#define MMAL_ENCODING_BAYER_SRGGB12P MMAL_FOURCC('p', 'R', '1', '2') ++ ++/* 16 bit per pixel Bayer formats. */ ++#define MMAL_ENCODING_BAYER_SBGGR16 MMAL_FOURCC('B', 'G', '1', '6') ++#define MMAL_ENCODING_BAYER_SGBRG16 MMAL_FOURCC('G', 'B', '1', '6') ++#define MMAL_ENCODING_BAYER_SGRBG16 MMAL_FOURCC('G', 'R', '1', '6') ++#define MMAL_ENCODING_BAYER_SRGGB16 MMAL_FOURCC('R', 'G', '1', '6') ++ + /** An EGL image handle + */ + #define MMAL_ENCODING_EGL_IMAGE MMAL_FOURCC('E', 'G', 'L', 'I') diff --git a/target/linux/brcm2708/patches-4.19/950-0319-mfd-Add-rpi_sense_core-of-compatible-string.patch b/target/linux/brcm2708/patches-4.19/950-0319-mfd-Add-rpi_sense_core-of-compatible-string.patch deleted file mode 100644 index 8d51d63eee..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0319-mfd-Add-rpi_sense_core-of-compatible-string.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 3e1371cc80a8153885cf87b06053ab2a2f1a1e66 Mon Sep 17 00:00:00 2001 -From: Serge Schneider -Date: Tue, 29 Jan 2019 12:05:49 +0000 -Subject: [PATCH 319/806] mfd: Add rpi_sense_core of compatible string - ---- - drivers/mfd/rpisense-core.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/mfd/rpisense-core.c -+++ b/drivers/mfd/rpisense-core.c -@@ -138,6 +138,14 @@ static const struct i2c_device_id rpisen - }; - MODULE_DEVICE_TABLE(i2c, rpisense_i2c_id); - -+#ifdef CONFIG_OF -+static const struct of_device_id rpisense_core_id[] = { -+ { .compatible = "rpi,rpi-sense" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, rpisense_core_id); -+#endif -+ - - static struct i2c_driver rpisense_driver = { - .driver = { diff --git a/target/linux/brcm2708/patches-4.19/950-0319-staging-mmal-vchiq-Always-return-the-param-size-from.patch b/target/linux/brcm2708/patches-4.19/950-0319-staging-mmal-vchiq-Always-return-the-param-size-from.patch new file mode 100644 index 0000000000..121f855f1c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0319-staging-mmal-vchiq-Always-return-the-param-size-from.patch @@ -0,0 +1,38 @@ +From 0c0e55d9b04868733f30c348df7400fa5e6d30e2 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 13 Feb 2019 12:36:56 +0000 +Subject: [PATCH] staging: mmal-vchiq: Always return the param size + from param_get + +mmal-vchiq is a reimplementation of the userland library for MMAL. +When getting a parameter, the client provides the storage and +the size of the storage. The VPU then returns the size of the +parameter that it wished to return, and as much as possible of +that parameter is returned to the client. + +The implementation previously only returned the size provided +by the VPU should it exceed the buffer size. So for parameters +such as the supported encodings list the client had no idea +how much of the provided storage had been populated. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -1413,11 +1413,12 @@ static int port_parameter_get(struct vch + */ + memcpy(value, &rmsg->u.port_parameter_get_reply.value, + *value_size); +- *value_size = rmsg->u.port_parameter_get_reply.size; + } else { + memcpy(value, &rmsg->u.port_parameter_get_reply.value, + rmsg->u.port_parameter_get_reply.size); + } ++ /* Always report the size of the returned parameter to the caller */ ++ *value_size = rmsg->u.port_parameter_get_reply.size; + + pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, + ret, port->component->handle, port->handle, parameter_id); diff --git a/target/linux/brcm2708/patches-4.19/950-0320-gpu-vc4_firmware_kms-Fix-up-64-bit-compile-warnings.patch b/target/linux/brcm2708/patches-4.19/950-0320-gpu-vc4_firmware_kms-Fix-up-64-bit-compile-warnings.patch deleted file mode 100644 index 14116258da..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0320-gpu-vc4_firmware_kms-Fix-up-64-bit-compile-warnings.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 32e0a9e2549c43d9abc03427ba6f3b7b8c2e1407 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 28 Jan 2019 14:40:16 +0000 -Subject: [PATCH 320/806] gpu: vc4_firmware_kms: Fix up 64 bit compile - warnings. - -Resolve two build warnings with regard using incorrectly -sized parameters in logging messages on 64 bit builds. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 11 ++++++----- - 1 file changed, 6 insertions(+), 5 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -160,14 +160,14 @@ static void vc4_primary_plane_atomic_upd - WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); - } - -- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%08x/%d\n", -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%pad/%d\n", - plane->base.id, plane->name, - state->crtc_w, - state->crtc_h, - bpp, - state->crtc_x, - state->crtc_y, -- bo->paddr + fb->offsets[0], -+ &fbinfo->base, - fb->pitches[0]); - - ret = rpi_firmware_transaction(vc4->firmware, -@@ -197,6 +197,7 @@ static void vc4_cursor_plane_atomic_upda - struct drm_plane_state *state = plane->state; - struct drm_framebuffer *fb = state->fb; - struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -+ dma_addr_t addr = bo->paddr + fb->offsets[0]; - int ret; - u32 packet_state[] = { - state->crtc->state->active, -@@ -206,13 +207,13 @@ static void vc4_cursor_plane_atomic_upda - }; - WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); - -- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%08x/%d)", -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%pad/%d)", - plane->base.id, plane->name, - state->crtc_w, - state->crtc_h, - state->crtc_x, - state->crtc_y, -- bo->paddr + fb->offsets[0], -+ &addr, - fb->pitches[0]); - - /* add on the top/left offsets when overscan is active */ -@@ -238,7 +239,7 @@ static void vc4_cursor_plane_atomic_upda - fb != old_state->fb) { - u32 packet_info[] = { state->crtc_w, state->crtc_h, - 0, /* unused */ -- bo->paddr + fb->offsets[0], -+ addr, - 0, 0, /* hotx, hoty */}; - - ret = rpi_firmware_property(vc4->firmware, diff --git a/target/linux/brcm2708/patches-4.19/950-0320-staging-mmal-vchiq-If-the-VPU-returns-an-error-don-t.patch b/target/linux/brcm2708/patches-4.19/950-0320-staging-mmal-vchiq-If-the-VPU-returns-an-error-don-t.patch new file mode 100644 index 0000000000..603b394b0f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0320-staging-mmal-vchiq-If-the-VPU-returns-an-error-don-t.patch @@ -0,0 +1,29 @@ +From 78c34cf60b9ae8bf8aa797c72d2f1abdc0a0bb9d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 13 Feb 2019 12:51:03 +0000 +Subject: [PATCH] staging: mmal-vchiq: If the VPU returns an error, + don't negate it + +There is an enum for the errors that the VPU can return. +port_parameter_get was negating that value, but also using -EINVAL +from the Linux error codes. +Pass the VPU error code as positive values. Should the function +need to pass a Linux failure, then return that as negative. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -1401,7 +1401,8 @@ static int port_parameter_get(struct vch + goto release_msg; + } + +- ret = -rmsg->u.port_parameter_get_reply.status; ++ ret = rmsg->u.port_parameter_get_reply.status; ++ + /* port_parameter_get_reply.size includes the header, + * whilst *value_size doesn't. + */ diff --git a/target/linux/brcm2708/patches-4.19/950-0321-input-rpi-ft5406-Clear-build-warning-on-64-bit-build.patch b/target/linux/brcm2708/patches-4.19/950-0321-input-rpi-ft5406-Clear-build-warning-on-64-bit-build.patch deleted file mode 100644 index de03d141d2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0321-input-rpi-ft5406-Clear-build-warning-on-64-bit-build.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 61ce13e4ab846aa035037217c5eec6aff229e539 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 28 Jan 2019 14:42:34 +0000 -Subject: [PATCH 321/806] input: rpi-ft5406: Clear build warning on 64 bit - builds. - -Resolve 64 bit build warning over using %x with a dma_addr_t. - -Signed-off-by: Dave Stevenson ---- - drivers/input/touchscreen/rpi-ft5406.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/input/touchscreen/rpi-ft5406.c -+++ b/drivers/input/touchscreen/rpi-ft5406.c -@@ -218,8 +218,8 @@ static int ft5406_probe(struct platform_ - - if (!ts->ts_base) { - dev_warn(dev, -- "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", -- err, touchbuf, ts->ts_base, ts->bus_addr); -+ "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%pad)\n", -+ err, touchbuf, ts->ts_base, &ts->bus_addr); - - err = rpi_firmware_property( - fw, diff --git a/target/linux/brcm2708/patches-4.19/950-0321-staging-bcm2835_codec-Query-supported-formats-from-t.patch b/target/linux/brcm2708/patches-4.19/950-0321-staging-bcm2835_codec-Query-supported-formats-from-t.patch new file mode 100644 index 0000000000..5eec74e42a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0321-staging-bcm2835_codec-Query-supported-formats-from-t.patch @@ -0,0 +1,727 @@ +From ce8cc7a85839af588b753ce4af0832db9c467f45 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 13 Feb 2019 13:44:00 +0000 +Subject: [PATCH] staging: bcm2835_codec: Query supported formats from + the component + +The driver was previously working with hard coded tables of +which video formats were supported by each component. +The components advertise this information via a MMAL parameter, +so retrieve the information from there during probe, and store +in the state structure for that device. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 455 +++++++++++++----- + 1 file changed, 327 insertions(+), 128 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -88,17 +88,12 @@ struct bcm2835_codec_fmt { + int bytesperline_align; + u32 flags; + u32 mmal_fmt; +- bool decode_only; +- bool encode_only; + int size_multiplier_x2; + }; + +-/* Supported raw pixel formats. Those supported for both encode and decode +- * must come first, with those only supported for decode coming after (there +- * are no formats supported for encode only). +- */ +-static struct bcm2835_codec_fmt raw_formats[] = { ++static const struct bcm2835_codec_fmt supported_formats[] = { + { ++ /* YUV formats */ + .fourcc = V4L2_PIX_FMT_YUV420, + .depth = 8, + .bytesperline_align = 32, +@@ -139,7 +134,6 @@ static struct bcm2835_codec_fmt raw_form + .bytesperline_align = 32, + .flags = 0, + .mmal_fmt = MMAL_ENCODING_YUYV, +- .encode_only = true, + .size_multiplier_x2 = 2, + }, { + .fourcc = V4L2_PIX_FMT_UYVY, +@@ -147,7 +141,6 @@ static struct bcm2835_codec_fmt raw_form + .bytesperline_align = 32, + .flags = 0, + .mmal_fmt = MMAL_ENCODING_UYVY, +- .encode_only = true, + .size_multiplier_x2 = 2, + }, { + .fourcc = V4L2_PIX_FMT_YVYU, +@@ -155,7 +148,6 @@ static struct bcm2835_codec_fmt raw_form + .bytesperline_align = 32, + .flags = 0, + .mmal_fmt = MMAL_ENCODING_YVYU, +- .encode_only = true, + .size_multiplier_x2 = 2, + }, { + .fourcc = V4L2_PIX_FMT_VYUY, +@@ -163,15 +155,14 @@ static struct bcm2835_codec_fmt raw_form + .bytesperline_align = 32, + .flags = 0, + .mmal_fmt = MMAL_ENCODING_VYUY, +- .encode_only = true, + .size_multiplier_x2 = 2, + }, { ++ /* RGB formats */ + .fourcc = V4L2_PIX_FMT_RGB24, + .depth = 24, + .bytesperline_align = 32, + .flags = 0, + .mmal_fmt = MMAL_ENCODING_RGB24, +- .encode_only = true, + .size_multiplier_x2 = 2, + }, { + .fourcc = V4L2_PIX_FMT_BGR24, +@@ -179,7 +170,6 @@ static struct bcm2835_codec_fmt raw_form + .bytesperline_align = 32, + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BGR24, +- .encode_only = true, + .size_multiplier_x2 = 2, + }, { + .fourcc = V4L2_PIX_FMT_BGR32, +@@ -187,17 +177,126 @@ static struct bcm2835_codec_fmt raw_form + .bytesperline_align = 32, + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BGRA, +- .encode_only = true, + .size_multiplier_x2 = 2, +- }, +-}; +- +-/* Supported encoded formats. Those supported for both encode and decode +- * must come first, with those only supported for decode coming after (there +- * are no formats supported for encode only). +- */ +-static struct bcm2835_codec_fmt encoded_formats[] = { +- { ++ }, { ++ /* Bayer formats */ ++ /* 8 bit */ ++ .fourcc = V4L2_PIX_FMT_SRGGB8, ++ .depth = 8, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB8, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SBGGR8, ++ .depth = 8, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR8, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGRBG8, ++ .depth = 8, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG8, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGBRG8, ++ .depth = 8, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG8, ++ .size_multiplier_x2 = 2, ++ }, { ++ /* 10 bit */ ++ .fourcc = V4L2_PIX_FMT_SRGGB10P, ++ .depth = 10, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB10P, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SBGGR10P, ++ .depth = 10, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR10P, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGRBG10P, ++ .depth = 10, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG10P, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGBRG10P, ++ .depth = 10, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG10P, ++ .size_multiplier_x2 = 2, ++ }, { ++ /* 12 bit */ ++ .fourcc = V4L2_PIX_FMT_SRGGB12P, ++ .depth = 12, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB12P, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SBGGR12P, ++ .depth = 12, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR12P, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGRBG12P, ++ .depth = 12, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG12P, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGBRG12P, ++ .depth = 12, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG12P, ++ .size_multiplier_x2 = 2, ++ }, { ++ /* 16 bit */ ++ .fourcc = V4L2_PIX_FMT_SRGGB16, ++ .depth = 16, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB16, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SBGGR16, ++ .depth = 16, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR16, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGRBG16, ++ .depth = 16, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG16, ++ .size_multiplier_x2 = 2, ++ }, { ++ .fourcc = V4L2_PIX_FMT_SGBRG16, ++ .depth = 16, ++ .bytesperline_align = 32, ++ .flags = 0, ++ .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG16, ++ .size_multiplier_x2 = 2, ++ }, { ++ /* Compressed formats */ + .fourcc = V4L2_PIX_FMT_H264, + .depth = 0, + .flags = V4L2_FMT_FLAG_COMPRESSED, +@@ -212,30 +311,22 @@ static struct bcm2835_codec_fmt encoded_ + .depth = 0, + .flags = V4L2_FMT_FLAG_COMPRESSED, + .mmal_fmt = MMAL_ENCODING_MP4V, +- .decode_only = true, + }, { + .fourcc = V4L2_PIX_FMT_H263, + .depth = 0, + .flags = V4L2_FMT_FLAG_COMPRESSED, + .mmal_fmt = MMAL_ENCODING_H263, +- .decode_only = true, + }, { + .fourcc = V4L2_PIX_FMT_MPEG2, + .depth = 0, + .flags = V4L2_FMT_FLAG_COMPRESSED, + .mmal_fmt = MMAL_ENCODING_MP2V, +- .decode_only = true, + }, { + .fourcc = V4L2_PIX_FMT_VP8, + .depth = 0, + .flags = V4L2_FMT_FLAG_COMPRESSED, + .mmal_fmt = MMAL_ENCODING_VP8, +- .decode_only = true, + }, +- /* +- * This list couold include VP6 and Theorafor decode, but V4L2 doesn't +- * support them. +- */ + }; + + struct bcm2835_codec_fmt_list { +@@ -243,19 +334,6 @@ struct bcm2835_codec_fmt_list { + unsigned int num_entries; + }; + +-#define RAW_LIST 0 +-#define ENCODED_LIST 1 +- +-struct bcm2835_codec_fmt_list formats[] = { +- { +- .list = raw_formats, +- .num_entries = ARRAY_SIZE(raw_formats), +- }, { +- .list = encoded_formats, +- .num_entries = ARRAY_SIZE(encoded_formats), +- }, +-}; +- + struct m2m_mmal_buffer { + struct v4l2_m2m_buffer m2m; + struct mmal_buffer mmal; +@@ -284,52 +362,6 @@ struct bcm2835_codec_q_data { + bool eos_buffer_in_use; /* debug only */ + }; + +-enum { +- V4L2_M2M_SRC = 0, +- V4L2_M2M_DST = 1, +-}; +- +-static inline struct bcm2835_codec_fmt_list *get_format_list(bool decode, +- bool capture) +-{ +- return decode ^ capture ? &formats[ENCODED_LIST] : &formats[RAW_LIST]; +-} +- +-static struct bcm2835_codec_fmt *get_default_format(bool decode, bool capture) +-{ +- return &get_format_list(decode, capture)->list[0]; +-} +- +-static struct bcm2835_codec_fmt *find_format(struct v4l2_format *f, bool decode, +- bool capture) +-{ +- struct bcm2835_codec_fmt *fmt; +- unsigned int k; +- struct bcm2835_codec_fmt_list *fmts = get_format_list(decode, capture); +- +- for (k = 0; k < fmts->num_entries; k++) { +- fmt = &fmts->list[k]; +- if (fmt->fourcc == f->fmt.pix.pixelformat) +- break; +- } +- +- /* +- * Some compressed formats are only supported for decoding, not +- * encoding. +- */ +- if (!decode && fmts->list[k].decode_only) +- return NULL; +- +- /* Some pixel formats are only supported for encoding, not decoding. */ +- if (decode && fmts->list[k].encode_only) +- return NULL; +- +- if (k == fmts->num_entries) +- return NULL; +- +- return &fmts->list[k]; +-} +- + struct bcm2835_codec_dev { + struct platform_device *pdev; + +@@ -342,6 +374,9 @@ struct bcm2835_codec_dev { + + /* allocated mmal instance and components */ + bool decode; /* Is this instance a decoder? */ ++ /* The list of formats supported on input and output queues. */ ++ struct bcm2835_codec_fmt_list supported_fmts[2]; ++ + struct vchiq_mmal_instance *instance; + + struct v4l2_m2m_dev *m2m_dev; +@@ -374,8 +409,59 @@ struct bcm2835_codec_ctx { + struct bcm2835_codec_driver { + struct bcm2835_codec_dev *encode; + struct bcm2835_codec_dev *decode; ++ struct bcm2835_codec_dev *isp; ++}; ++ ++enum { ++ V4L2_M2M_SRC = 0, ++ V4L2_M2M_DST = 1, + }; + ++static const struct bcm2835_codec_fmt *get_fmt(u32 mmal_fmt) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < ARRAY_SIZE(supported_formats); i++) { ++ if (supported_formats[i].mmal_fmt == mmal_fmt) ++ return &supported_formats[i]; ++ } ++ return NULL; ++} ++ ++static inline ++struct bcm2835_codec_fmt_list *get_format_list(struct bcm2835_codec_dev *dev, ++ bool capture) ++{ ++ return &dev->supported_fmts[capture ? 1 : 0]; ++} ++ ++static ++struct bcm2835_codec_fmt *get_default_format(struct bcm2835_codec_dev *dev, ++ bool capture) ++{ ++ return &dev->supported_fmts[capture ? 1 : 0].list[0]; ++} ++ ++static struct bcm2835_codec_fmt *find_format(struct v4l2_format *f, ++ struct bcm2835_codec_dev *dev, ++ bool capture) ++{ ++ struct bcm2835_codec_fmt *fmt; ++ unsigned int k; ++ struct bcm2835_codec_fmt_list *fmts = ++ &dev->supported_fmts[capture ? 1 : 0]; ++ ++ for (k = 0; k < fmts->num_entries; k++) { ++ fmt = &fmts->list[k]; ++ if (fmt->fourcc == f->fmt.pix.pixelformat) ++ break; ++ } ++ if (k == fmts->num_entries) ++ return NULL; ++ ++ return &fmts->list[k]; ++} ++ + static inline struct bcm2835_codec_ctx *file2ctx(struct file *file) + { + return container_of(file->private_data, struct bcm2835_codec_ctx, fh); +@@ -456,7 +542,6 @@ static inline unsigned int get_bytesperl + } + + static void setup_mmal_port_format(struct bcm2835_codec_ctx *ctx, +- bool decode, + struct bcm2835_codec_q_data *q_data, + struct vchiq_mmal_port *port) + { +@@ -473,7 +558,7 @@ static void setup_mmal_port_format(struc + port->es.video.frame_rate.den = 1; + } else { + /* Compressed format - leave resolution as 0 for decode */ +- if (decode) { ++ if (ctx->dev->decode) { + port->es.video.width = 0; + port->es.video.height = 0; + port->es.video.crop.width = 0; +@@ -802,22 +887,15 @@ static int vidioc_querycap(struct file * + return 0; + } + +-static int enum_fmt(struct v4l2_fmtdesc *f, bool decode, bool capture) ++static int enum_fmt(struct v4l2_fmtdesc *f, struct bcm2835_codec_ctx *ctx, ++ bool capture) + { + struct bcm2835_codec_fmt *fmt; +- struct bcm2835_codec_fmt_list *fmts = get_format_list(decode, capture); ++ struct bcm2835_codec_fmt_list *fmts = ++ get_format_list(ctx->dev, capture); + + if (f->index < fmts->num_entries) { + /* Format found */ +- /* Check format isn't a decode only format when encoding */ +- if (!decode && +- fmts->list[f->index].decode_only) +- return -EINVAL; +- /* Check format isn't a decode only format when encoding */ +- if (decode && +- fmts->list[f->index].encode_only) +- return -EINVAL; +- + fmt = &fmts->list[f->index]; + f->pixelformat = fmt->fourcc; + f->flags = fmt->flags; +@@ -833,7 +911,7 @@ static int vidioc_enum_fmt_vid_cap(struc + { + struct bcm2835_codec_ctx *ctx = file2ctx(file); + +- return enum_fmt(f, ctx->dev->decode, true); ++ return enum_fmt(f, ctx, true); + } + + static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, +@@ -841,7 +919,7 @@ static int vidioc_enum_fmt_vid_out(struc + { + struct bcm2835_codec_ctx *ctx = file2ctx(file); + +- return enum_fmt(f, ctx->dev->decode, false); ++ return enum_fmt(f, ctx, false); + } + + static int vidioc_g_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f) +@@ -933,11 +1011,11 @@ static int vidioc_try_fmt_vid_cap(struct + struct bcm2835_codec_fmt *fmt; + struct bcm2835_codec_ctx *ctx = file2ctx(file); + +- fmt = find_format(f, ctx->dev->decode, true); ++ fmt = find_format(f, ctx->dev, true); + if (!fmt) { +- f->fmt.pix.pixelformat = get_default_format(ctx->dev->decode, ++ f->fmt.pix.pixelformat = get_default_format(ctx->dev, + true)->fourcc; +- fmt = find_format(f, ctx->dev->decode, true); ++ fmt = find_format(f, ctx->dev, true); + } + + return vidioc_try_fmt(f, fmt); +@@ -949,11 +1027,11 @@ static int vidioc_try_fmt_vid_out(struct + struct bcm2835_codec_fmt *fmt; + struct bcm2835_codec_ctx *ctx = file2ctx(file); + +- fmt = find_format(f, ctx->dev->decode, false); ++ fmt = find_format(f, ctx->dev, false); + if (!fmt) { +- f->fmt.pix.pixelformat = get_default_format(ctx->dev->decode, ++ f->fmt.pix.pixelformat = get_default_format(ctx->dev, + false)->fourcc; +- fmt = find_format(f, ctx->dev->decode, false); ++ fmt = find_format(f, ctx->dev, false); + } + + if (!f->fmt.pix.colorspace) +@@ -988,7 +1066,7 @@ static int vidioc_s_fmt(struct bcm2835_c + return -EBUSY; + } + +- q_data->fmt = find_format(f, ctx->dev->decode, ++ q_data->fmt = find_format(f, ctx->dev, + f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE); + q_data->crop_width = f->fmt.pix.width; + q_data->height = f->fmt.pix.height; +@@ -1041,7 +1119,7 @@ static int vidioc_s_fmt(struct bcm2835_c + if (!port) + return 0; + +- setup_mmal_port_format(ctx, ctx->dev->decode, q_data, port); ++ setup_mmal_port_format(ctx, q_data, port); + ret = vchiq_mmal_port_set_format(ctx->dev->instance, port); + if (ret) { + v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed vchiq_mmal_port_set_format on port, ret %d\n", +@@ -1064,8 +1142,7 @@ static int vidioc_s_fmt(struct bcm2835_c + struct bcm2835_codec_q_data *q_data_dst = + &ctx->q_data[V4L2_M2M_DST]; + +- setup_mmal_port_format(ctx, ctx->dev->decode, q_data_dst, +- port_dst); ++ setup_mmal_port_format(ctx, q_data_dst, port_dst); + ret = vchiq_mmal_port_set_format(ctx->dev->instance, port_dst); + if (ret) { + v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed vchiq_mmal_port_set_format on output port, ret %d\n", +@@ -1636,10 +1713,10 @@ static int bcm2835_codec_create_componen + MMAL_PARAMETER_ZERO_COPY, &enable, + sizeof(enable)); + +- setup_mmal_port_format(ctx, dev->decode, &ctx->q_data[V4L2_M2M_SRC], ++ setup_mmal_port_format(ctx, &ctx->q_data[V4L2_M2M_SRC], + &ctx->component->input[0]); + +- setup_mmal_port_format(ctx, dev->decode, &ctx->q_data[V4L2_M2M_DST], ++ setup_mmal_port_format(ctx, &ctx->q_data[V4L2_M2M_DST], + &ctx->component->output[0]); + + ret = vchiq_mmal_port_set_format(dev->instance, +@@ -2025,8 +2102,8 @@ static int bcm2835_codec_open(struct fil + goto open_unlock; + } + +- ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev->decode, false); +- ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev->decode, true); ++ ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev, false); ++ ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev, true); + if (dev->decode) { + /* + * Input width and height are irrelevant as they will be defined +@@ -2209,13 +2286,130 @@ static const struct v4l2_m2m_ops m2m_ops + .job_abort = job_abort, + }; + ++/* Size of the array to provide to the VPU when asking for the list of supported ++ * formats. ++ * The ISP component currently advertises 33 input formats, so add a small ++ * overhead on that. ++ */ ++#define MAX_SUPPORTED_ENCODINGS 40 ++ ++/* Populate dev->supported_fmts with the formats supported by those ports. */ ++static int bcm2835_codec_get_supported_fmts(struct bcm2835_codec_dev *dev) ++{ ++ struct bcm2835_codec_fmt *list; ++ struct vchiq_mmal_component *component; ++ u32 fourccs[MAX_SUPPORTED_ENCODINGS]; ++ u32 param_size = sizeof(fourccs); ++ unsigned int i, j, num_encodings; ++ int ret; ++ ++ ret = vchiq_mmal_component_init(dev->instance, ++ dev->decode ? ++ "ril.video_decode" : ++ "ril.video_encode", ++ &component); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, "%s: failed to create component\n", ++ __func__); ++ return -ENOMEM; ++ } ++ ++ ret = vchiq_mmal_port_parameter_get(dev->instance, ++ &component->input[0], ++ MMAL_PARAMETER_SUPPORTED_ENCODINGS, ++ &fourccs, ++ ¶m_size); ++ ++ if (ret) { ++ if (ret == MMAL_MSG_STATUS_ENOSPC) { ++ v4l2_err(&dev->v4l2_dev, "%s: port has more encoding than we provided space for. Some are dropped.\n", ++ __func__); ++ num_encodings = MAX_SUPPORTED_ENCODINGS; ++ } else { ++ v4l2_err(&dev->v4l2_dev, "%s: get_param ret %u.\n", ++ __func__, ret); ++ ret = -EINVAL; ++ goto destroy_component; ++ } ++ } else { ++ num_encodings = param_size / sizeof(u32); ++ } ++ ++ /* Assume at this stage that all encodings will be supported in V4L2. ++ * Any that aren't supported will waste a very small amount of memory. ++ */ ++ list = devm_kzalloc(&dev->pdev->dev, ++ sizeof(struct bcm2835_codec_fmt) * num_encodings, ++ GFP_KERNEL); ++ if (!list) { ++ ret = -ENOMEM; ++ goto destroy_component; ++ } ++ dev->supported_fmts[0].list = list; ++ ++ for (i = 0, j = 0; i < num_encodings; i++) { ++ const struct bcm2835_codec_fmt *fmt = get_fmt(fourccs[i]); ++ ++ if (fmt) { ++ list[j] = *fmt; ++ j++; ++ } ++ } ++ dev->supported_fmts[0].num_entries = j; ++ ++ param_size = sizeof(fourccs); ++ ret = vchiq_mmal_port_parameter_get(dev->instance, ++ &component->output[0], ++ MMAL_PARAMETER_SUPPORTED_ENCODINGS, ++ &fourccs, ++ ¶m_size); ++ ++ if (ret) { ++ if (ret == MMAL_MSG_STATUS_ENOSPC) { ++ v4l2_err(&dev->v4l2_dev, "%s: port has more encoding than we provided space for. Some are dropped.\n", ++ __func__); ++ num_encodings = MAX_SUPPORTED_ENCODINGS; ++ } else { ++ ret = -EINVAL; ++ goto destroy_component; ++ } ++ } else { ++ num_encodings = param_size / sizeof(u32); ++ } ++ /* Assume at this stage that all encodings will be supported in V4L2. */ ++ list = devm_kzalloc(&dev->pdev->dev, ++ sizeof(struct bcm2835_codec_fmt) * num_encodings, ++ GFP_KERNEL); ++ if (!list) { ++ ret = -ENOMEM; ++ goto destroy_component; ++ } ++ dev->supported_fmts[1].list = list; ++ ++ for (i = 0, j = 0; i < num_encodings; i++) { ++ const struct bcm2835_codec_fmt *fmt = get_fmt(fourccs[i]); ++ ++ if (fmt) { ++ list[j] = *fmt; ++ j++; ++ } ++ } ++ dev->supported_fmts[1].num_entries = j; ++ ++ ret = 0; ++ ++destroy_component: ++ vchiq_mmal_component_finalise(dev->instance, component); ++ ++ return ret; ++} ++ + static int bcm2835_codec_create(struct platform_device *pdev, + struct bcm2835_codec_dev **new_dev, + bool decode) + { + struct bcm2835_codec_dev *dev; + struct video_device *vfd; +- struct vchiq_mmal_instance *instance = NULL; + int video_nr; + int ret; + +@@ -2227,10 +2421,18 @@ static int bcm2835_codec_create(struct p + + dev->decode = decode; + +- ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); ++ ret = vchiq_mmal_init(&dev->instance); + if (ret) + return ret; + ++ ret = bcm2835_codec_get_supported_fmts(dev); ++ if (ret) ++ goto vchiq_finalise; ++ ++ ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); ++ if (ret) ++ goto vchiq_finalise; ++ + atomic_set(&dev->num_inst, 0); + mutex_init(&dev->dev_mutex); + +@@ -2270,12 +2472,7 @@ static int bcm2835_codec_create(struct p + goto err_m2m; + } + +- ret = vchiq_mmal_init(&instance); +- if (ret < 0) +- goto err_m2m; +- dev->instance = instance; +- +- v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s codec\n", ++ v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s\n", + dev->decode ? "decode" : "encode"); + return 0; + +@@ -2284,7 +2481,8 @@ err_m2m: + video_unregister_device(&dev->vfd); + unreg_dev: + v4l2_device_unregister(&dev->v4l2_dev); +- ++vchiq_finalise: ++ vchiq_mmal_finalise(dev->instance); + return ret; + } + +@@ -2297,6 +2495,7 @@ static int bcm2835_codec_destroy(struct + v4l2_m2m_release(dev->m2m_dev); + video_unregister_device(&dev->vfd); + v4l2_device_unregister(&dev->v4l2_dev); ++ vchiq_mmal_finalise(dev->instance); + + return 0; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0322-dtoverlays-Correct-DT-handling-camera-GPIOs.patch b/target/linux/brcm2708/patches-4.19/950-0322-dtoverlays-Correct-DT-handling-camera-GPIOs.patch deleted file mode 100644 index 3b8ccffa22..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0322-dtoverlays-Correct-DT-handling-camera-GPIOs.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 5c0dfdba54fdaeb813d8535283aa8f75080e1055 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 18 Sep 2018 10:47:38 +0100 -Subject: [PATCH 322/806] dtoverlays: Correct DT handling camera GPIOs - -The firmware has support for updating overrides with the correct -GPIO settings for the camera GPIOs, but the wrong device tree -setup ended up being merged. -Correct the DT configuration so that the firmware does set it -up correctly. - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/bcm270x.dtsi | 7 +++++++ - arch/arm/boot/dts/overlays/README | 10 +--------- - arch/arm/boot/dts/overlays/ov5647-overlay.dts | 14 +++++++++++--- - 3 files changed, 19 insertions(+), 12 deletions(-) - ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -152,6 +152,13 @@ - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -+ -+ __overrides__ { -+ cam0-pwdn-ctrl; -+ cam0-pwdn; -+ cam0-led-ctrl; -+ cam0-led; -+ }; - }; - - &vc4 { ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1366,15 +1366,7 @@ Info: Omnivision OV5647 camera module. - Uses Unicam 1, which is the standard camera connector on most Pi - variants. - Load: dtoverlay=ov5647,= --Params: cam0-pwdn GPIO used to control the sensor powerdown line. -- -- cam0-led GPIO used to control the sensor led -- Both these fields should be automatically filled -- in by the firmware to reflect the default GPIO -- configuration of the particular Pi variant in -- use. -- -- i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. - Useful on Compute Modules. - - i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. ---- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts -@@ -14,7 +14,7 @@ - status = "okay"; - - ov5647: ov5647@36 { -- compatible = "ov5647"; -+ compatible = "ovti,ov5647"; - reg = <0x36>; - status = "okay"; - -@@ -82,10 +82,18 @@ - }; - }; - -+ fragment@6 { -+ target-path="/__overrides__"; -+ __overlay__ { -+ cam0-pwdn-ctrl = <&ov5647>,"pwdn-gpios:0"; -+ cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; -+ cam0-led-ctrl = <&ov5647>,"pwdn-gpios:12"; -+ cam0-led = <&ov5647>,"pwdn-gpios:16"; -+ }; -+ }; -+ - __overrides__ { - i2c_pins_0_1 = <0>,"-2-3+4"; - i2c_pins_28_29 = <0>,"+2-3-4"; -- cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; -- cam0-led = <&ov5647>,"pwdn-gpios:16"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0322-staging-bcm2835_codec-Add-support-for-the-ISP-as-an-.patch b/target/linux/brcm2708/patches-4.19/950-0322-staging-bcm2835_codec-Add-support-for-the-ISP-as-an-.patch new file mode 100644 index 0000000000..df59acd249 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0322-staging-bcm2835_codec-Add-support-for-the-ISP-as-an-.patch @@ -0,0 +1,384 @@ +From 7afce6566802bcaa468f92b9e06da8b899161128 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 13 Feb 2019 14:07:52 +0000 +Subject: [PATCH] staging: bcm2835_codec: Add support for the ISP as an + M2M device + +The MMAL ISP component can also use this same V4L2 wrapper to +provide a M2M format conversion and resizer. +Instantiate 3 V4L2 devices now, one for each of decode, encode, +and isp. +The ISP currently doesn't expose any controls via V4L2, but this +can be extended in the future. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 132 ++++++++++++------ + 1 file changed, 92 insertions(+), 40 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -54,10 +54,26 @@ static int encode_video_nr = 11; + module_param(encode_video_nr, int, 0644); + MODULE_PARM_DESC(encode_video_nr, "encoder video device number"); + ++static int isp_video_nr = 12; ++module_param(isp_video_nr, int, 0644); ++MODULE_PARM_DESC(isp_video_nr, "isp video device number"); ++ + static unsigned int debug; + module_param(debug, uint, 0644); + MODULE_PARM_DESC(debug, "activates debug info (0-3)"); + ++enum bcm2835_codec_role { ++ DECODE, ++ ENCODE, ++ ISP, ++}; ++ ++static const char * const components[] = { ++ "ril.video_decode", ++ "ril.video_encode", ++ "ril.isp", ++}; ++ + #define MIN_W 32 + #define MIN_H 32 + #define MAX_W 1920 +@@ -373,7 +389,7 @@ struct bcm2835_codec_dev { + atomic_t num_inst; + + /* allocated mmal instance and components */ +- bool decode; /* Is this instance a decoder? */ ++ enum bcm2835_codec_role role; + /* The list of formats supported on input and output queues. */ + struct bcm2835_codec_fmt_list supported_fmts[2]; + +@@ -558,7 +574,7 @@ static void setup_mmal_port_format(struc + port->es.video.frame_rate.den = 1; + } else { + /* Compressed format - leave resolution as 0 for decode */ +- if (ctx->dev->decode) { ++ if (ctx->dev->role == DECODE) { + port->es.video.width = 0; + port->es.video.height = 0; + port->es.video.crop.width = 0; +@@ -1089,7 +1105,8 @@ static int vidioc_s_fmt(struct bcm2835_c + v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Calulated bpl as %u, size %u\n", + q_data->bytesperline, q_data->sizeimage); + +- if (ctx->dev->decode && q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED && ++ if (ctx->dev->role == DECODE && ++ q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED && + f->fmt.pix.width && f->fmt.pix.height) { + /* + * On the decoder, if provided with a resolution on the input +@@ -1188,7 +1205,8 @@ static int vidioc_g_selection(struct fil + bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? + true : false; + +- if (capture_queue ^ ctx->dev->decode) ++ if ((ctx->dev->role == DECODE && !capture_queue) || ++ (ctx->dev->role == ENCODE && capture_queue)) + /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ + return -EINVAL; + +@@ -1196,7 +1214,8 @@ static int vidioc_g_selection(struct fil + if (!q_data) + return -EINVAL; + +- if (ctx->dev->decode) { ++ switch (ctx->dev->role) { ++ case DECODE: + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE: +@@ -1214,7 +1233,8 @@ static int vidioc_g_selection(struct fil + default: + return -EINVAL; + } +- } else { ++ break; ++ case ENCODE: + switch (s->target) { + case V4L2_SEL_TGT_CROP_DEFAULT: + case V4L2_SEL_TGT_CROP_BOUNDS: +@@ -1232,6 +1252,9 @@ static int vidioc_g_selection(struct fil + default: + return -EINVAL; + } ++ break; ++ case ISP: ++ break; + } + + return 0; +@@ -1249,7 +1272,8 @@ static int vidioc_s_selection(struct fil + __func__, ctx, s->type, q_data, s->target, s->r.left, s->r.top, + s->r.width, s->r.height); + +- if (capture_queue ^ ctx->dev->decode) ++ if ((ctx->dev->role == DECODE && !capture_queue) || ++ (ctx->dev->role == ENCODE && capture_queue)) + /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ + return -EINVAL; + +@@ -1257,7 +1281,8 @@ static int vidioc_s_selection(struct fil + if (!q_data) + return -EINVAL; + +- if (ctx->dev->decode) { ++ switch (ctx->dev->role) { ++ case DECODE: + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE: + /* Accept cropped image */ +@@ -1272,7 +1297,8 @@ static int vidioc_s_selection(struct fil + default: + return -EINVAL; + } +- } else { ++ break; ++ case ENCODE: + switch (s->target) { + case V4L2_SEL_TGT_CROP: + /* Only support crop from (0,0) */ +@@ -1287,6 +1313,9 @@ static int vidioc_s_selection(struct fil + default: + return -EINVAL; + } ++ break; ++ case ISP: ++ break; + } + + return 0; +@@ -1490,7 +1519,7 @@ static int vidioc_try_decoder_cmd(struct + { + struct bcm2835_codec_ctx *ctx = file2ctx(file); + +- if (!ctx->dev->decode) ++ if (ctx->dev->role != DECODE) + return -EINVAL; + + switch (cmd->cmd) { +@@ -1564,7 +1593,7 @@ static int vidioc_try_encoder_cmd(struct + { + struct bcm2835_codec_ctx *ctx = file2ctx(file); + +- if (ctx->dev->decode) ++ if (ctx->dev->role != ENCODE) + return -EINVAL; + + switch (cmd->cmd) { +@@ -1697,12 +1726,11 @@ static int bcm2835_codec_create_componen + unsigned int enable = 1; + int ret; + +- ret = vchiq_mmal_component_init(dev->instance, dev->decode ? +- "ril.video_decode" : "ril.video_encode", ++ ret = vchiq_mmal_component_init(dev->instance, components[dev->role], + &ctx->component); + if (ret < 0) { +- v4l2_err(&dev->v4l2_dev, "%s: failed to create component for %s\n", +- __func__, dev->decode ? "decode" : "encode"); ++ v4l2_err(&dev->v4l2_dev, "%s: failed to create component %s\n", ++ __func__, components[dev->role]); + return -ENOMEM; + } + +@@ -1729,13 +1757,7 @@ static int bcm2835_codec_create_componen + if (ret < 0) + goto destroy_component; + +- if (dev->decode) { +- if (ctx->q_data[V4L2_M2M_DST].sizeimage < +- ctx->component->output[0].minimum_buffer.size) +- v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", +- ctx->q_data[V4L2_M2M_DST].sizeimage, +- ctx->component->output[0].minimum_buffer.size); +- } else { ++ if (dev->role == ENCODE) { + if (ctx->q_data[V4L2_M2M_SRC].sizeimage < + ctx->component->output[0].minimum_buffer.size) + v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", +@@ -1744,6 +1766,12 @@ static int bcm2835_codec_create_componen + + /* Now we have a component we can set all the ctrls */ + bcm2835_codec_set_ctrls(ctx); ++ } else { ++ if (ctx->q_data[V4L2_M2M_DST].sizeimage < ++ ctx->component->output[0].minimum_buffer.size) ++ v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", ++ ctx->q_data[V4L2_M2M_DST].sizeimage, ++ ctx->component->output[0].minimum_buffer.size); + } + + return 0; +@@ -2090,8 +2118,6 @@ static int bcm2835_codec_open(struct fil + struct v4l2_ctrl_handler *hdl; + int rc = 0; + +- v4l2_dbg(1, debug, &dev->v4l2_dev, "Creating instance for %s\n", +- dev->decode ? "decode" : "encode"); + if (mutex_lock_interruptible(&dev->dev_mutex)) { + v4l2_err(&dev->v4l2_dev, "Mutex fail\n"); + return -ERESTARTSYS; +@@ -2104,7 +2130,8 @@ static int bcm2835_codec_open(struct fil + + ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev, false); + ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev, true); +- if (dev->decode) { ++ switch (dev->role) { ++ case DECODE: + /* + * Input width and height are irrelevant as they will be defined + * by the bitstream not the format. Required by V4L2 though. +@@ -2126,7 +2153,8 @@ static int bcm2835_codec_open(struct fil + get_sizeimage(ctx->q_data[V4L2_M2M_DST].bytesperline, + ctx->q_data[V4L2_M2M_DST].height, + ctx->q_data[V4L2_M2M_DST].fmt); +- } else { ++ break; ++ case ENCODE: + ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; + ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; + ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; +@@ -2144,6 +2172,9 @@ static int bcm2835_codec_open(struct fil + ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; + ctx->q_data[V4L2_M2M_DST].sizeimage = + DEF_COMP_BUF_SIZE_720P_OR_LESS; ++ break; ++ case ISP: ++ break; + } + + ctx->colorspace = V4L2_COLORSPACE_REC709; +@@ -2154,7 +2185,7 @@ static int bcm2835_codec_open(struct fil + file->private_data = &ctx->fh; + ctx->dev = dev; + hdl = &ctx->hdl; +- if (!dev->decode) { ++ if (dev->role == ENCODE) { + /* Encode controls */ + v4l2_ctrl_handler_init(hdl, 6); + +@@ -2303,14 +2334,11 @@ static int bcm2835_codec_get_supported_f + unsigned int i, j, num_encodings; + int ret; + +- ret = vchiq_mmal_component_init(dev->instance, +- dev->decode ? +- "ril.video_decode" : +- "ril.video_encode", ++ ret = vchiq_mmal_component_init(dev->instance, components[dev->role], + &component); + if (ret < 0) { +- v4l2_err(&dev->v4l2_dev, "%s: failed to create component\n", +- __func__); ++ v4l2_err(&dev->v4l2_dev, "%s: failed to create component %s\n", ++ __func__, components[dev->role]); + return -ENOMEM; + } + +@@ -2406,12 +2434,13 @@ destroy_component: + + static int bcm2835_codec_create(struct platform_device *pdev, + struct bcm2835_codec_dev **new_dev, +- bool decode) ++ enum bcm2835_codec_role role) + { + struct bcm2835_codec_dev *dev; + struct video_device *vfd; + int video_nr; + int ret; ++ const static char *roles[] = {"decode", "encode", "isp"}; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) +@@ -2419,7 +2448,7 @@ static int bcm2835_codec_create(struct p + + dev->pdev = pdev; + +- dev->decode = decode; ++ dev->role = role; + + ret = vchiq_mmal_init(&dev->instance); + if (ret) +@@ -2441,14 +2470,27 @@ static int bcm2835_codec_create(struct p + vfd->lock = &dev->dev_mutex; + vfd->v4l2_dev = &dev->v4l2_dev; + +- if (dev->decode) { ++ switch (role) { ++ case DECODE: + v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD); + v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); + video_nr = decode_video_nr; +- } else { ++ break; ++ case ENCODE: + v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); + v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); + video_nr = encode_video_nr; ++ break; ++ case ISP: ++ v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD); ++ v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); ++ v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); ++ v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); ++ video_nr = isp_video_nr; ++ break; ++ default: ++ ret = -EINVAL; ++ goto unreg_dev; + } + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); +@@ -2473,7 +2515,7 @@ static int bcm2835_codec_create(struct p + } + + v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s\n", +- dev->decode ? "decode" : "encode"); ++ roles[role]); + return 0; + + err_m2m: +@@ -2509,11 +2551,15 @@ static int bcm2835_codec_probe(struct pl + if (!drv) + return -ENOMEM; + +- ret = bcm2835_codec_create(pdev, &drv->encode, false); ++ ret = bcm2835_codec_create(pdev, &drv->decode, DECODE); + if (ret) + goto out; + +- ret = bcm2835_codec_create(pdev, &drv->decode, true); ++ ret = bcm2835_codec_create(pdev, &drv->encode, ENCODE); ++ if (ret) ++ goto out; ++ ++ ret = bcm2835_codec_create(pdev, &drv->isp, ISP); + if (ret) + goto out; + +@@ -2526,6 +2572,10 @@ out: + bcm2835_codec_destroy(drv->encode); + drv->encode = NULL; + } ++ if (drv->decode) { ++ bcm2835_codec_destroy(drv->decode); ++ drv->decode = NULL; ++ } + return ret; + } + +@@ -2533,6 +2583,8 @@ static int bcm2835_codec_remove(struct p + { + struct bcm2835_codec_driver *drv = platform_get_drvdata(pdev); + ++ bcm2835_codec_destroy(drv->isp); ++ + bcm2835_codec_destroy(drv->encode); + + bcm2835_codec_destroy(drv->decode); diff --git a/target/linux/brcm2708/patches-4.19/950-0323-media-ov5647-Use-gpiod_set_value_cansleep.patch b/target/linux/brcm2708/patches-4.19/950-0323-media-ov5647-Use-gpiod_set_value_cansleep.patch deleted file mode 100644 index 84c09bb37f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0323-media-ov5647-Use-gpiod_set_value_cansleep.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 3be30ee1b3aafd7c6cc45bcea77f25c9613732f4 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 18 Sep 2018 11:08:51 +0100 -Subject: [PATCH 323/806] media: ov5647: Use gpiod_set_value_cansleep - -All calls to the gpio library are in contexts that can sleep, -therefore there is no issue with having those GPIOs controlled -by controllers which require sleeping (eg I2C GPIO expanders). - -Switch to using gpiod_set_value_cansleep instead of gpiod_set_value -to avoid triggering the warning in gpiolib should the GPIO -controller need to sleep. - -Signed-off-by: Dave Stevenson ---- - drivers/media/i2c/ov5647.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/media/i2c/ov5647.c -+++ b/drivers/media/i2c/ov5647.c -@@ -373,7 +373,7 @@ static int ov5647_sensor_power(struct v4 - dev_dbg(&client->dev, "OV5647 power on\n"); - - if (ov5647->pwdn) { -- gpiod_set_value(ov5647->pwdn, 0); -+ gpiod_set_value_cansleep(ov5647->pwdn, 0); - msleep(PWDN_ACTIVE_DELAY_MS); - } - -@@ -415,7 +415,7 @@ static int ov5647_sensor_power(struct v4 - - clk_disable_unprepare(ov5647->xclk); - -- gpiod_set_value(ov5647->pwdn, 1); -+ gpiod_set_value_cansleep(ov5647->pwdn, 1); - } - - /* Update the power count. */ -@@ -649,13 +649,13 @@ static int ov5647_probe(struct i2c_clien - goto mutex_remove; - - if (sensor->pwdn) { -- gpiod_set_value(sensor->pwdn, 0); -+ gpiod_set_value_cansleep(sensor->pwdn, 0); - msleep(PWDN_ACTIVE_DELAY_MS); - } - - ret = ov5647_detect(sd); - -- gpiod_set_value(sensor->pwdn, 1); -+ gpiod_set_value_cansleep(sensor->pwdn, 1); - - if (ret < 0) - goto error; diff --git a/target/linux/brcm2708/patches-4.19/950-0323-staging-bcm2835_codec-Add-an-option-for-ignoring-Bay.patch b/target/linux/brcm2708/patches-4.19/950-0323-staging-bcm2835_codec-Add-an-option-for-ignoring-Bay.patch new file mode 100644 index 0000000000..fcdcc4ab48 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0323-staging-bcm2835_codec-Add-an-option-for-ignoring-Bay.patch @@ -0,0 +1,179 @@ +From a126fcc4ff38718e2e714fbb78db3ca1c4f8e564 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 15 Feb 2019 11:36:14 +0000 +Subject: [PATCH] staging: bcm2835_codec: Add an option for ignoring + Bayer formats. + +This is a workaround for GStreamer currently not identifying Bayer +as a raw format, therefore any device that supports it does not +match the criteria for v4l2convert. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 29 ++++++++++++++++++- + 1 file changed, 28 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -58,6 +58,15 @@ static int isp_video_nr = 12; + module_param(isp_video_nr, int, 0644); + MODULE_PARM_DESC(isp_video_nr, "isp video device number"); + ++/* ++ * Workaround for GStreamer v4l2convert component not considering Bayer formats ++ * as raw, and therefore not considering a V4L2 device that supports them as ++ * as a suitable candidate. ++ */ ++static bool disable_bayer; ++module_param(disable_bayer, bool, 0644); ++MODULE_PARM_DESC(disable_bayer, "Disable support for Bayer formats"); ++ + static unsigned int debug; + module_param(debug, uint, 0644); + MODULE_PARM_DESC(debug, "activates debug info (0-3)"); +@@ -105,6 +114,7 @@ struct bcm2835_codec_fmt { + u32 flags; + u32 mmal_fmt; + int size_multiplier_x2; ++ bool is_bayer; + }; + + static const struct bcm2835_codec_fmt supported_formats[] = { +@@ -203,6 +213,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB8, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR8, + .depth = 8, +@@ -210,6 +221,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR8, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG8, + .depth = 8, +@@ -217,6 +229,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG8, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG8, + .depth = 8, +@@ -224,6 +237,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG8, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + /* 10 bit */ + .fourcc = V4L2_PIX_FMT_SRGGB10P, +@@ -232,6 +246,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB10P, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR10P, + .depth = 10, +@@ -239,6 +254,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR10P, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG10P, + .depth = 10, +@@ -246,6 +262,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG10P, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG10P, + .depth = 10, +@@ -253,6 +270,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG10P, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + /* 12 bit */ + .fourcc = V4L2_PIX_FMT_SRGGB12P, +@@ -261,6 +279,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB12P, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR12P, + .depth = 12, +@@ -268,6 +287,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR12P, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG12P, + .depth = 12, +@@ -275,6 +295,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG12P, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG12P, + .depth = 12, +@@ -282,6 +303,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG12P, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + /* 16 bit */ + .fourcc = V4L2_PIX_FMT_SRGGB16, +@@ -290,6 +312,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB16, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR16, + .depth = 16, +@@ -297,6 +320,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR16, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG16, + .depth = 16, +@@ -304,6 +328,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG16, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG16, + .depth = 16, +@@ -311,6 +336,7 @@ static const struct bcm2835_codec_fmt su + .flags = 0, + .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG16, + .size_multiplier_x2 = 2, ++ .is_bayer = true, + }, { + /* Compressed formats */ + .fourcc = V4L2_PIX_FMT_H264, +@@ -438,7 +464,8 @@ static const struct bcm2835_codec_fmt *g + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(supported_formats); i++) { +- if (supported_formats[i].mmal_fmt == mmal_fmt) ++ if (supported_formats[i].mmal_fmt == mmal_fmt && ++ (!disable_bayer || !supported_formats[i].is_bayer)) + return &supported_formats[i]; + } + return NULL; diff --git a/target/linux/brcm2708/patches-4.19/950-0324-media-bcm2835-unicam-Power-on-subdev-on-open-release.patch b/target/linux/brcm2708/patches-4.19/950-0324-media-bcm2835-unicam-Power-on-subdev-on-open-release.patch deleted file mode 100644 index f7488593e2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0324-media-bcm2835-unicam-Power-on-subdev-on-open-release.patch +++ /dev/null @@ -1,121 +0,0 @@ -From bf1805e0c8c4fc05e2a13b0a03b510ff4e523418 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 29 Jan 2019 15:56:10 +0000 -Subject: [PATCH 324/806] media:bcm2835-unicam: Power on subdev on - open/release, not streaming - -The driver was powering on the source subdevice as part of STREAMON, -and powering it off in STREAMOFF. This isn't so great if there is a -significant amount of setup required for your device. - -Copy the approach taken in the Atmel ISC driver where s_power(1) is called -on first file handle open, and s_power(0) is called on the last release. - -See https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=232437 - -Signed-off-by: Dave Stevenson ---- - .../media/platform/bcm2835/bcm2835-unicam.c | 68 +++++++++++++++---- - 1 file changed, 54 insertions(+), 14 deletions(-) - ---- a/drivers/media/platform/bcm2835/bcm2835-unicam.c -+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c -@@ -1237,11 +1237,6 @@ static int unicam_start_streaming(struct - unicam_err(dev, "Failed to enable CSI clock: %d\n", ret); - goto err_pm_put; - } -- ret = v4l2_subdev_call(dev->sensor, core, s_power, 1); -- if (ret < 0 && ret != -ENOIOCTLCMD) { -- unicam_err(dev, "power on failed in subdev\n"); -- goto err_clock_unprepare; -- } - dev->streaming = 1; - - unicam_start_rx(dev, addr); -@@ -1256,8 +1251,6 @@ static int unicam_start_streaming(struct - - err_disable_unicam: - unicam_disable(dev); -- v4l2_subdev_call(dev->sensor, core, s_power, 0); --err_clock_unprepare: - clk_disable_unprepare(dev->clock); - err_pm_put: - unicam_runtime_put(dev); -@@ -1306,11 +1299,6 @@ static void unicam_stop_streaming(struct - dev->next_frm = NULL; - spin_unlock_irqrestore(&dev->dma_queue_lock, flags); - -- if (v4l2_subdev_has_op(dev->sensor, core, s_power)) { -- if (v4l2_subdev_call(dev->sensor, core, s_power, 0) < 0) -- unicam_err(dev, "power off failed in subdev\n"); -- } -- - clk_disable_unprepare(dev->clock); - unicam_runtime_put(dev); - } -@@ -1543,11 +1531,63 @@ static const struct vb2_ops unicam_video - .stop_streaming = unicam_stop_streaming, - }; - -+/* -+ * unicam_open : This function is based on the v4l2_fh_open helper function. -+ * It has been augmented to handle sensor subdevice power management, -+ */ -+static int unicam_open(struct file *file) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ int ret; -+ -+ mutex_lock(&dev->lock); -+ -+ ret = v4l2_fh_open(file); -+ if (ret) { -+ unicam_err(dev, "v4l2_fh_open failed\n"); -+ goto unlock; -+ } -+ -+ if (!v4l2_fh_is_singular_file(file)) -+ goto unlock; -+ -+ ret = v4l2_subdev_call(dev->sensor, core, s_power, 1); -+ if (ret < 0 && ret != -ENOIOCTLCMD) { -+ v4l2_fh_release(file); -+ goto unlock; -+ } -+ -+unlock: -+ mutex_unlock(&dev->lock); -+ return ret; -+} -+ -+static int unicam_release(struct file *file) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ struct v4l2_subdev *sd = dev->sensor; -+ bool fh_singular; -+ int ret; -+ -+ mutex_lock(&dev->lock); -+ -+ fh_singular = v4l2_fh_is_singular_file(file); -+ -+ ret = _vb2_fop_release(file, NULL); -+ -+ if (fh_singular) -+ v4l2_subdev_call(sd, core, s_power, 0); -+ -+ mutex_unlock(&dev->lock); -+ -+ return ret; -+} -+ - /* unicam capture driver file operations */ - static const struct v4l2_file_operations unicam_fops = { - .owner = THIS_MODULE, -- .open = v4l2_fh_open, -- .release = vb2_fop_release, -+ .open = unicam_open, -+ .release = unicam_release, - .read = vb2_fop_read, - .poll = vb2_fop_poll, - .unlocked_ioctl = video_ioctl2, diff --git a/target/linux/brcm2708/patches-4.19/950-0324-staging-bcm2835_codec-Fix-handling-of-VB2_MEMORY_DMA.patch b/target/linux/brcm2708/patches-4.19/950-0324-staging-bcm2835_codec-Fix-handling-of-VB2_MEMORY_DMA.patch new file mode 100644 index 0000000000..7e3373e489 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0324-staging-bcm2835_codec-Fix-handling-of-VB2_MEMORY_DMA.patch @@ -0,0 +1,186 @@ +From 0df32e2f563123166c20677f022d4a0f825c5df2 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 15 Feb 2019 11:38:45 +0000 +Subject: [PATCH] staging: bcm2835_codec: Fix handling of + VB2_MEMORY_DMABUF buffers + +If the queue is configured as VB2_MEMORY_DMABUF then vb2_core_expbuf +fails as it ensures the queue is defined as VB2_MEMORY_MMAP. + +Correct the handling so that we unmap the buffer from vcsm and the +VPU on cleanup, and then correctly get the dma buf of the new buffer. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 80 +++++++++++++------ + .../vc04_services/vchiq-mmal/mmal-vchiq.c | 21 +++-- + .../vc04_services/vchiq-mmal/mmal-vchiq.h | 2 + + 3 files changed, 73 insertions(+), 30 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -1852,6 +1852,18 @@ static int bcm2835_codec_queue_setup(str + return 0; + } + ++static int bcm2835_codec_mmal_buf_cleanup(struct mmal_buffer *mmal_buf) ++{ ++ mmal_vchi_buffer_cleanup(mmal_buf); ++ ++ if (mmal_buf->dma_buf) { ++ dma_buf_put(mmal_buf->dma_buf); ++ mmal_buf->dma_buf = NULL; ++ } ++ ++ return 0; ++} ++ + static int bcm2835_codec_buf_init(struct vb2_buffer *vb) + { + struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); +@@ -1880,6 +1892,7 @@ static int bcm2835_codec_buf_prepare(str + vb); + struct m2m_mmal_buffer *buf = container_of(m2m, struct m2m_mmal_buffer, + m2m); ++ struct dma_buf *dma_buf; + int ret; + + v4l2_dbg(4, debug, &ctx->dev->v4l2_dev, "%s: type: %d ptr %p\n", +@@ -1906,20 +1919,48 @@ static int bcm2835_codec_buf_prepare(str + if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) + vb2_set_plane_payload(vb, 0, q_data->sizeimage); + +- /* +- * We want to do this at init, but vb2_core_expbuf checks that the +- * index < q->num_buffers, and q->num_buffers only gets updated once +- * all the buffers are allocated. +- */ +- if (!buf->mmal.dma_buf) { +- ret = vb2_core_expbuf_dmabuf(vb->vb2_queue, +- vb->vb2_queue->type, vb->index, 0, +- O_CLOEXEC, &buf->mmal.dma_buf); +- if (ret) +- v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed to expbuf idx %d, ret %d\n", +- __func__, vb->index, ret); +- } else { ++ switch (vb->memory) { ++ case VB2_MEMORY_DMABUF: ++ dma_buf = dma_buf_get(vb->planes[0].m.fd); ++ ++ if (dma_buf != buf->mmal.dma_buf) { ++ /* dmabuf either hasn't already been mapped, or it has ++ * changed. ++ */ ++ if (buf->mmal.dma_buf) { ++ v4l2_err(&ctx->dev->v4l2_dev, ++ "%s Buffer changed - why did the core not call cleanup?\n", ++ __func__); ++ bcm2835_codec_mmal_buf_cleanup(&buf->mmal); ++ } ++ ++ buf->mmal.dma_buf = dma_buf; ++ } + ret = 0; ++ break; ++ case VB2_MEMORY_MMAP: ++ /* ++ * We want to do this at init, but vb2_core_expbuf checks that ++ * the index < q->num_buffers, and q->num_buffers only gets ++ * updated once all the buffers are allocated. ++ */ ++ if (!buf->mmal.dma_buf) { ++ ret = vb2_core_expbuf_dmabuf(vb->vb2_queue, ++ vb->vb2_queue->type, ++ vb->index, 0, ++ O_CLOEXEC, ++ &buf->mmal.dma_buf); ++ if (ret) ++ v4l2_err(&ctx->dev->v4l2_dev, ++ "%s: Failed to expbuf idx %d, ret %d\n", ++ __func__, vb->index, ret); ++ } else { ++ ret = 0; ++ } ++ break; ++ default: ++ ret = -EINVAL; ++ break; + } + + return ret; +@@ -1948,12 +1989,7 @@ static void bcm2835_codec_buffer_cleanup + v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: ctx:%p, vb %p\n", + __func__, ctx, vb); + +- mmal_vchi_buffer_cleanup(&buf->mmal); +- +- if (buf->mmal.dma_buf) { +- dma_buf_put(buf->mmal.dma_buf); +- buf->mmal.dma_buf = NULL; +- } ++ bcm2835_codec_mmal_buf_cleanup(&buf->mmal); + } + + static int bcm2835_codec_start_streaming(struct vb2_queue *q, +@@ -2067,11 +2103,7 @@ static void bcm2835_codec_stop_streaming + m2m = container_of(vb2, struct v4l2_m2m_buffer, vb); + buf = container_of(m2m, struct m2m_mmal_buffer, m2m); + +- mmal_vchi_buffer_cleanup(&buf->mmal); +- if (buf->mmal.dma_buf) { +- dma_buf_put(buf->mmal.dma_buf); +- buf->mmal.dma_buf = NULL; +- } ++ bcm2835_codec_mmal_buf_cleanup(&buf->mmal); + } + + /* If both ports disabled, then disable the component */ +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -1785,13 +1785,9 @@ int mmal_vchi_buffer_init(struct vchiq_m + } + EXPORT_SYMBOL_GPL(mmal_vchi_buffer_init); + +-int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf) ++int mmal_vchi_buffer_unmap(struct mmal_buffer *buf) + { +- struct mmal_msg_context *msg_context = buf->msg_context; +- +- if (msg_context) +- release_msg_context(msg_context); +- buf->msg_context = NULL; ++ int ret = 0; + + if (buf->vcsm_handle) { + int ret; +@@ -1803,6 +1799,19 @@ int mmal_vchi_buffer_cleanup(struct mmal + pr_err("%s: vcsm_free failed, ret %d\n", __func__, ret); + buf->vcsm_handle = 0; + } ++ return ret; ++} ++EXPORT_SYMBOL_GPL(mmal_vchi_buffer_unmap); ++ ++int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf) ++{ ++ struct mmal_msg_context *msg_context = buf->msg_context; ++ ++ if (msg_context) ++ release_msg_context(msg_context); ++ buf->msg_context = NULL; ++ ++ mmal_vchi_buffer_unmap(buf); + return 0; + } + EXPORT_SYMBOL_GPL(mmal_vchi_buffer_cleanup); +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h +@@ -167,6 +167,8 @@ int vchiq_mmal_submit_buffer(struct vchi + struct vchiq_mmal_port *port, + struct mmal_buffer *buf); + ++int mmal_vchi_buffer_unmap(struct mmal_buffer *buf); ++ + int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, + struct mmal_buffer *buf); + int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf); diff --git a/target/linux/brcm2708/patches-4.19/950-0325-audioinjector-octo-revert-to-dummy-supplies.patch b/target/linux/brcm2708/patches-4.19/950-0325-audioinjector-octo-revert-to-dummy-supplies.patch deleted file mode 100644 index 8b8842fd23..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0325-audioinjector-octo-revert-to-dummy-supplies.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 0e69aceab4e7615cf631a8c7bdb25093cbba240a Mon Sep 17 00:00:00 2001 -From: Matt Flax -Date: Tue, 29 Jan 2019 14:56:03 +1100 -Subject: [PATCH 325/806] audioinjector-octo: revert to dummy supplies - -The Audio Injector Octo has had a lot of reports of not coming up on power cycles. By reverting to dummy supplies, the card comes up reliably. ---- - arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts | 4 ---- - 1 file changed, 4 deletions(-) - ---- a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts -+++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts -@@ -25,10 +25,6 @@ - reg = <0x48>; - clocks = <&cs42448_mclk>; - clock-names = "mclk"; -- VA-supply = <&vdd_5v0_reg>; -- VD-supply = <&vdd_3v3_reg>; -- VLS-supply = <&vdd_3v3_reg>; -- VLC-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0325-staging-mmal-vchiq-Update-mmal_parameters.h-with-rec.patch b/target/linux/brcm2708/patches-4.19/950-0325-staging-mmal-vchiq-Update-mmal_parameters.h-with-rec.patch new file mode 100644 index 0000000000..98162a0e80 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0325-staging-mmal-vchiq-Update-mmal_parameters.h-with-rec.patch @@ -0,0 +1,56 @@ +From f51a6ed76f6a59e65fe06d1f2e06e824f38ae604 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 18 Feb 2019 15:52:29 +0000 +Subject: [PATCH] staging: mmal-vchiq: Update mmal_parameters.h with + recently defined params + +mmal_parameters.h hasn't been updated to reflect additions made +over the last few years. Update it to reflect the currently +supported parameters. + +Signed-off-by: Dave Stevenson +--- + .../vchiq-mmal/mmal-parameters.h | 32 ++++++++++++++++++- + 1 file changed, 31 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h +@@ -580,7 +580,37 @@ enum mmal_parameter_video_type { + MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG, + + /**< @ref MMAL_PARAMETER_BOOLEAN_T */ +- MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER ++ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER, ++ ++ /**< Take a @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_SEI_ENABLE, ++ ++ /**< Take a @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_VECTORS, ++ ++ /**< Take a @ref MMAL_PARAMETER_VIDEO_RENDER_STATS_T. */ ++ MMAL_PARAMETER_VIDEO_RENDER_STATS, ++ ++ /**< Take a @ref MMAL_PARAMETER_VIDEO_INTERLACE_TYPE_T. */ ++ MMAL_PARAMETER_VIDEO_INTERLACE_TYPE, ++ ++ /**< Takes a @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_INTERPOLATE_TIMESTAMPS, ++ ++ /**< Takes a @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_SPS_TIMING, ++ ++ /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_VIDEO_MAX_NUM_CALLBACKS, ++ ++ /**< Takes a @ref MMAL_PARAMETER_SOURCE_PATTERN_T */ ++ MMAL_PARAMETER_VIDEO_SOURCE_PATTERN, ++ ++ /**< Takes a @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_SEPARATE_NAL_BUFS, ++ ++ /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAME_LENGTH, + }; + + /** Valid mirror modes */ diff --git a/target/linux/brcm2708/patches-4.19/950-0326-staging-bcm2835-camera-Correct-ctrl-min-max-step-def.patch b/target/linux/brcm2708/patches-4.19/950-0326-staging-bcm2835-camera-Correct-ctrl-min-max-step-def.patch deleted file mode 100644 index 62d37c5e88..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0326-staging-bcm2835-camera-Correct-ctrl-min-max-step-def.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 8c420772ef0f15ebbc3f13ebcc340d34bbdfad71 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 24 Jan 2019 16:20:38 +0000 -Subject: [PATCH 326/806] staging: bcm2835-camera: Correct ctrl - min/max/step/def to 64bit - -The V4L2 control API was expanded to take 64 bit values in commit -0ba2aeb6dab (Apr 16 2014), but as this driver wasn't in the mainline -kernel at that point this was overlooked. - -Update to use 64 bit values. This also fixes a couple of warnings -in 64 bit builds. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-camera/controls.c | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -78,10 +78,10 @@ struct bm2835_mmal_v4l2_ctrl { - /* control minimum value or - * mask for MMAL_CONTROL_TYPE_STD_MENU - */ -- s32 min; -- s32 max; /* maximum value of control */ -- s32 def; /* default value of control */ -- s32 step; /* step size of the control */ -+ s64 min; -+ s64 max; /* maximum value of control */ -+ s64 def; /* default value of control */ -+ u64 step; /* step size of the control */ - const s64 *imenu; /* integer menu array */ - u32 mmal_id; /* mmal parameter id */ - bm2835_mmal_v4l2_ctrl_cb *setter; -@@ -1244,7 +1244,7 @@ int bm2835_mmal_init_controls(struct bm2 - - case MMAL_CONTROL_TYPE_STD_MENU: - { -- int mask = ctrl->min; -+ u64 mask = ctrl->min; - - if (ctrl->id == V4L2_CID_SCENE_MODE) { - /* Special handling to work out the mask -@@ -1254,11 +1254,11 @@ int bm2835_mmal_init_controls(struct bm2 - */ - int i; - -- mask = 1 << V4L2_SCENE_MODE_NONE; -+ mask = BIT(V4L2_SCENE_MODE_NONE); - for (i = 0; - i < ARRAY_SIZE(scene_configs); - i++) { -- mask |= 1 << scene_configs[i].v4l2_scene; -+ mask |= BIT(scene_configs[i].v4l2_scene); - } - mask = ~mask; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0326-staging-bcm2835_codec-Include-timing-info-in-SPS-hea.patch b/target/linux/brcm2708/patches-4.19/950-0326-staging-bcm2835_codec-Include-timing-info-in-SPS-hea.patch new file mode 100644 index 0000000000..5e5f1a7bf8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0326-staging-bcm2835_codec-Include-timing-info-in-SPS-hea.patch @@ -0,0 +1,44 @@ +From 7f9fd2338e3a9d7b46b6904bbd7f97851e9b3f52 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 18 Feb 2019 15:56:42 +0000 +Subject: [PATCH] staging: bcm2835_codec: Include timing info in SPS + headers + +Inserting timing information into the VUI block of the SPS is +optional with the VPU encoder. +GStreamer appears to require them when using V4L2 M2M, therefore +set the option to enable them from the encoder. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -1785,6 +1785,8 @@ static int bcm2835_codec_create_componen + goto destroy_component; + + if (dev->role == ENCODE) { ++ u32 param = 1; ++ + if (ctx->q_data[V4L2_M2M_SRC].sizeimage < + ctx->component->output[0].minimum_buffer.size) + v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", +@@ -1793,6 +1795,16 @@ static int bcm2835_codec_create_componen + + /* Now we have a component we can set all the ctrls */ + bcm2835_codec_set_ctrls(ctx); ++ ++ /* Enable SPS Timing header so framerate information is encoded ++ * in the H264 header. ++ */ ++ vchiq_mmal_port_parameter_set( ++ ctx->dev->instance, ++ &ctx->component->output[0], ++ MMAL_PARAMETER_VIDEO_ENCODE_SPS_TIMING, ++ ¶m, sizeof(param)); ++ + } else { + if (ctx->q_data[V4L2_M2M_DST].sizeimage < + ctx->component->output[0].minimum_buffer.size) diff --git a/target/linux/brcm2708/patches-4.19/950-0327-drm-vc4-Don-t-wait-for-vblank-on-fkms-cursor-updates.patch b/target/linux/brcm2708/patches-4.19/950-0327-drm-vc4-Don-t-wait-for-vblank-on-fkms-cursor-updates.patch new file mode 100644 index 0000000000..545541f105 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0327-drm-vc4-Don-t-wait-for-vblank-on-fkms-cursor-updates.patch @@ -0,0 +1,28 @@ +From dd5fa07672eb01a4d90dfa39a4c54eaa0e086386 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 5 Feb 2018 18:53:18 +0000 +Subject: [PATCH] drm/vc4: Don't wait for vblank on fkms cursor + updates. + +We don't use the same async update path between fkms and normal kms, +and the normal kms workaround ended up making us wait. This became a +larger problem in rpi-4.14.y, as the USB HID update rate throttling +got (accidentally?) dropped. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_kms.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -222,7 +222,8 @@ static int vc4_atomic_commit(struct drm_ + * drm_atomic_helper_setup_commit() from auto-completing + * commit->flip_done. + */ +- state->legacy_cursor_update = false; ++ if (!vc4->firmware_kms) ++ state->legacy_cursor_update = false; + ret = drm_atomic_helper_setup_commit(state, nonblock); + if (ret) + return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0327-staging-bcm2835-codec-variable-vb2-may-be-used-unini.patch b/target/linux/brcm2708/patches-4.19/950-0327-staging-bcm2835-codec-variable-vb2-may-be-used-unini.patch deleted file mode 100644 index 92796e7140..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0327-staging-bcm2835-codec-variable-vb2-may-be-used-unini.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 8920ce80058cfa3d18dc8bc7535119e9986dbad7 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 24 Jan 2019 16:40:01 +0000 -Subject: [PATCH 327/806] staging: bcm2835-codec: variable vb2 may be used - uninitialised - -In op_buffer_cb, the failure path checked whether there was -an associated vb2 buffer before the variable vb2 had been -assigned. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -634,6 +634,9 @@ static void op_buffer_cb(struct vchiq_mm - __func__, status, mmal_buf, mmal_buf->length, - mmal_buf->mmal_flags, mmal_buf->pts); - -+ buf = container_of(mmal_buf, struct m2m_mmal_buffer, mmal); -+ vb2 = &buf->m2m.vb; -+ - if (status) { - /* error in transfer */ - if (vb2) { -@@ -658,9 +661,6 @@ static void op_buffer_cb(struct vchiq_mm - return; - } - -- buf = container_of(mmal_buf, struct m2m_mmal_buffer, mmal); -- vb2 = &buf->m2m.vb; -- - v4l2_dbg(3, debug, &ctx->dev->v4l2_dev, "%s: length %lu, flags %x, idx %u\n", - __func__, mmal_buf->length, mmal_buf->mmal_flags, - vb2->vb2_buf.index); diff --git a/target/linux/brcm2708/patches-4.19/950-0328-Fix-for-Pisound-kernel-module-in-Real-Time-kernel-co.patch b/target/linux/brcm2708/patches-4.19/950-0328-Fix-for-Pisound-kernel-module-in-Real-Time-kernel-co.patch new file mode 100644 index 0000000000..657d70d82a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0328-Fix-for-Pisound-kernel-module-in-Real-Time-kernel-co.patch @@ -0,0 +1,38 @@ +From c93b0344d24ba63e0e4caeb693a9fcb7320aae3a Mon Sep 17 00:00:00 2001 +From: Giedrius +Date: Wed, 27 Feb 2019 14:27:28 +0000 +Subject: [PATCH] Fix for Pisound kernel module in Real Time kernel + configuration. + +When handler of data_available interrupt is fired, queue_work ends up +getting called and it can block on a spin lock which is not allowed in +interrupt context. The fix was to run the handler from a thread context +instead. +--- + sound/soc/bcm/pisound.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/sound/soc/bcm/pisound.c ++++ b/sound/soc/bcm/pisound.c +@@ -1,6 +1,6 @@ + /* + * Pisound Linux kernel module. +- * Copyright (C) 2016-2017 Vilniaus Blokas UAB, https://blokas.io/pisound ++ * Copyright (C) 2016-2019 Vilniaus Blokas UAB, https://blokas.io/pisound + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License +@@ -532,10 +532,10 @@ static void pisnd_spi_gpio_uninit(void) + + static int pisnd_spi_gpio_irq_init(struct device *dev) + { +- return request_irq( +- gpiod_to_irq(data_available), ++ return request_threaded_irq( ++ gpiod_to_irq(data_available), NULL, + data_available_interrupt_handler, +- IRQF_TIMER | IRQF_TRIGGER_RISING, ++ IRQF_TIMER | IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "data_available_int", + NULL + ); diff --git a/target/linux/brcm2708/patches-4.19/950-0328-staging-bcm2835-codec-Fix-potentially-uninitialised-.patch b/target/linux/brcm2708/patches-4.19/950-0328-staging-bcm2835-codec-Fix-potentially-uninitialised-.patch deleted file mode 100644 index 8d6cfda397..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0328-staging-bcm2835-codec-Fix-potentially-uninitialised-.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 7e3cada9dae5d030256605a28df9537b26e776a8 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 24 Jan 2019 16:36:19 +0000 -Subject: [PATCH 328/806] staging: bcm2835-codec: Fix potentially uninitialised - vars - -src_m2m_buf and dst_m2m_buf were printed in log messages -when there are code paths that don't initialise them. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -743,7 +743,7 @@ static void device_run(void *priv) - struct bcm2835_codec_ctx *ctx = priv; - struct bcm2835_codec_dev *dev = ctx->dev; - struct vb2_v4l2_buffer *src_buf, *dst_buf; -- struct m2m_mmal_buffer *src_m2m_buf, *dst_m2m_buf; -+ struct m2m_mmal_buffer *src_m2m_buf = NULL, *dst_m2m_buf = NULL; - struct v4l2_m2m_buffer *m2m; - int ret; - diff --git a/target/linux/brcm2708/patches-4.19/950-0329-Added-mute-stream-func.patch b/target/linux/brcm2708/patches-4.19/950-0329-Added-mute-stream-func.patch new file mode 100644 index 0000000000..7ab46e82fe --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0329-Added-mute-stream-func.patch @@ -0,0 +1,146 @@ +From 193dc2529db3cfee676aae2b18f059363e151e09 Mon Sep 17 00:00:00 2001 +From: Jaikumar +Date: Thu, 7 Jun 2018 21:22:45 +0530 +Subject: [PATCH] Added mute stream func + +Signed-off-by: Jaikumar +--- + sound/soc/bcm/allo-katana-codec.c | 60 ++++++++++++++++++++++--------- + 1 file changed, 44 insertions(+), 16 deletions(-) + +--- a/sound/soc/bcm/allo-katana-codec.c ++++ b/sound/soc/bcm/allo-katana-codec.c +@@ -31,21 +31,23 @@ + + #define KATANA_CODEC_CHIP_ID 0x30 + #define KATANA_CODEC_VIRT_BASE 0x100 +-#define KATANA_CODEC_PAGE 0 ++#define KATANA_CODEC_PAGE 0 + + #define KATANA_CODEC_CHIP_ID_REG (KATANA_CODEC_VIRT_BASE + 0) +-#define KATANA_CODEC_RESET (KATANA_CODEC_VIRT_BASE + 1) ++#define KATANA_CODEC_RESET (KATANA_CODEC_VIRT_BASE + 1) + #define KATANA_CODEC_VOLUME_1 (KATANA_CODEC_VIRT_BASE + 2) + #define KATANA_CODEC_VOLUME_2 (KATANA_CODEC_VIRT_BASE + 3) +-#define KATANA_CODEC_MUTE (KATANA_CODEC_VIRT_BASE + 4) ++#define KATANA_CODEC_MUTE (KATANA_CODEC_VIRT_BASE + 4) + #define KATANA_CODEC_DSP_PROGRAM (KATANA_CODEC_VIRT_BASE + 5) + #define KATANA_CODEC_DEEMPHASIS (KATANA_CODEC_VIRT_BASE + 6) +-#define KATANA_CODEC_DOP (KATANA_CODEC_VIRT_BASE + 7) +-#define KATANA_CODEC_FORMAT (KATANA_CODEC_VIRT_BASE + 8) ++#define KATANA_CODEC_DOP (KATANA_CODEC_VIRT_BASE + 7) ++#define KATANA_CODEC_FORMAT (KATANA_CODEC_VIRT_BASE + 8) + #define KATANA_CODEC_COMMAND (KATANA_CODEC_VIRT_BASE + 9) +-#define KATANA_CODEC_MAX_REGISTER (KATANA_CODEC_VIRT_BASE + 9) ++#define KATANA_CODEC_MUTE_STREAM (KATANA_CODEC_VIRT_BASE + 10) + +-#define KATANA_CODEC_FMT 0xff ++#define KATANA_CODEC_MAX_REGISTER (KATANA_CODEC_VIRT_BASE + 10) ++ ++#define KATANA_CODEC_FMT 0xff + #define KATANA_CODEC_CHAN_MONO 0x00 + #define KATANA_CODEC_CHAN_STEREO 0x80 + #define KATANA_CODEC_ALEN_16 0x10 +@@ -135,7 +137,8 @@ static const struct snd_kcontrol_new kat + SOC_SINGLE("DoP Playback Switch", KATANA_CODEC_DOP, 0, 1, 1) + }; + +-static bool katana_codec_readable_register(struct device *dev, unsigned int reg) ++static bool katana_codec_readable_register(struct device *dev, ++ unsigned int reg) + { + switch (reg) { + case KATANA_CODEC_CHIP_ID_REG: +@@ -150,13 +153,15 @@ static int katana_codec_hw_params(struct + struct snd_soc_dai *dai) + { + struct snd_soc_component *component = dai->component; +- struct katana_codec_priv *katana_codec = snd_soc_component_get_drvdata(component); ++ struct katana_codec_priv *katana_codec = ++ snd_soc_component_get_drvdata(component); + int fmt = 0; + int ret; + +- dev_dbg(component->card->dev, "hw_params %u Hz, %u channels\n", ++ dev_dbg(component->card->dev, "hw_params %u Hz, %u channels, %u bits\n", + params_rate(params), +- params_channels(params)); ++ params_channels(params), ++ params_width(params)); + + switch (katana_codec->fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: // master +@@ -212,13 +217,17 @@ static int katana_codec_hw_params(struct + return -EINVAL; + } + +- ret = regmap_write(katana_codec->regmap, KATANA_CODEC_FORMAT, fmt); ++ ret = regmap_write(katana_codec->regmap, KATANA_CODEC_FORMAT, ++ fmt); + if (ret != 0) { + dev_err(component->card->dev, "Failed to set format: %d\n", ret); + return ret; + } + break; + ++ case SND_SOC_DAIFMT_CBS_CFS: ++ break; ++ + default: + return -EINVAL; + } +@@ -229,14 +238,33 @@ static int katana_codec_hw_params(struct + static int katana_codec_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) + { + struct snd_soc_component *component = dai->component; +- struct katana_codec_priv *katana_codec = snd_soc_component_get_drvdata(component); ++ struct katana_codec_priv *katana_codec = ++ snd_soc_component_get_drvdata(component); + + katana_codec->fmt = fmt; + + return 0; + } + ++int katana_codec_dai_mute_stream(struct snd_soc_dai *dai, int mute, ++ int stream) ++{ ++ struct snd_soc_component *component = dai->component; ++ struct katana_codec_priv *katana_codec = ++ snd_soc_component_get_drvdata(component); ++ int ret = 0; ++ ++ ret = regmap_write(katana_codec->regmap, KATANA_CODEC_MUTE_STREAM, ++ mute); ++ if (ret != 0) { ++ dev_err(component->card->dev, "Failed to set mute: %d\n", ret); ++ return ret; ++ } ++ return ret; ++} ++ + static const struct snd_soc_dai_ops katana_codec_dai_ops = { ++ .mute_stream = katana_codec_dai_mute_stream, + .hw_params = katana_codec_hw_params, + .set_fmt = katana_codec_set_fmt, + }; +@@ -300,7 +328,7 @@ static int allo_katana_component_probe(s + return PTR_ERR(regmap); + + katana_codec = devm_kzalloc(dev, sizeof(struct katana_codec_priv), +- GFP_KERNEL); ++ GFP_KERNEL); + if (!katana_codec) + return -ENOMEM; + +@@ -348,8 +376,8 @@ static struct i2c_driver allo_katana_com + .remove = allo_katana_component_remove, + .id_table = allo_katana_component_id, + .driver = { +- .name = "allo-katana-codec", +- .of_match_table = allo_katana_codec_of_match, ++ .name = "allo-katana-codec", ++ .of_match_table = allo_katana_codec_of_match, + }, + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0329-video-bcm2708_fb-Add-compat_ioctl-support.patch b/target/linux/brcm2708/patches-4.19/950-0329-video-bcm2708_fb-Add-compat_ioctl-support.patch deleted file mode 100644 index 9f3ea3015c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0329-video-bcm2708_fb-Add-compat_ioctl-support.patch +++ /dev/null @@ -1,154 +0,0 @@ -From b5bd7b621f6ab2f29e9f18ec2a2720d702b9727c Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 25 Jan 2019 17:12:54 +0000 -Subject: [PATCH 329/806] video: bcm2708_fb: Add compat_ioctl support. - -When using a 64 bit kernel with 32 bit userspace we need -compat ioctl handling for FBIODMACOPY as one of the -parameters is a pointer. - -Signed-off-by: Dave Stevenson ---- - drivers/video/fbdev/bcm2708_fb.c | 87 ++++++++++++++++++++++++-------- - 1 file changed, 66 insertions(+), 21 deletions(-) - ---- a/drivers/video/fbdev/bcm2708_fb.c -+++ b/drivers/video/fbdev/bcm2708_fb.c -@@ -482,9 +482,8 @@ static void dma_memcpy(struct bcm2708_fb - /* cache coherent but non-allocating in L1 and L2 */ - #define INTALIAS_L1L2_NONALLOCATING(x) (((x)&~0xc0000000)|0x80000000) - --static long vc_mem_copy(struct bcm2708_fb *fb, unsigned long arg) -+static long vc_mem_copy(struct bcm2708_fb *fb, struct fb_dmacopy *ioparam) - { -- struct fb_dmacopy ioparam; - size_t size = PAGE_SIZE; - u32 *buf = NULL; - dma_addr_t bus_addr; -@@ -497,26 +496,16 @@ static long vc_mem_copy(struct bcm2708_f - goto out; - } - -- /* Get the parameter data. -- */ -- if (copy_from_user -- (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -- pr_err("[%s]: failed to copy-from-user\n", -- __func__); -- rc = -EFAULT; -- goto out; -- } -- -- if (fb->gpu.base == 0 || fb->gpu.length == 0) { -+ if (!fb->gpu.base || !fb->gpu.length) { - pr_err("[%s]: Unable to determine gpu memory (%x,%x)\n", - __func__, fb->gpu.base, fb->gpu.length); - return -EFAULT; - } - -- if (INTALIAS_NORMAL(ioparam.src) < fb->gpu.base || -- INTALIAS_NORMAL(ioparam.src) >= fb->gpu.base + fb->gpu.length) { -+ if (INTALIAS_NORMAL(ioparam->src) < fb->gpu.base || -+ INTALIAS_NORMAL(ioparam->src) >= fb->gpu.base + fb->gpu.length) { - pr_err("[%s]: Invalid memory access %x (%x-%x)", __func__, -- INTALIAS_NORMAL(ioparam.src), fb->gpu.base, -+ INTALIAS_NORMAL(ioparam->src), fb->gpu.base, - fb->gpu.base + fb->gpu.length); - return -EFAULT; - } -@@ -530,11 +519,11 @@ static long vc_mem_copy(struct bcm2708_f - goto out; - } - -- for (offset = 0; offset < ioparam.length; offset += size) { -- size_t remaining = ioparam.length - offset; -+ for (offset = 0; offset < ioparam->length; offset += size) { -+ size_t remaining = ioparam->length - offset; - size_t s = min(size, remaining); -- unsigned char *p = (unsigned char *)ioparam.src + offset; -- unsigned char *q = (unsigned char *)ioparam.dst + offset; -+ u8 *p = (u8 *)((uintptr_t)ioparam->src + offset); -+ u8 *q = (u8 *)ioparam->dst + offset; - - dma_memcpy(fb, bus_addr, - INTALIAS_L1L2_NONALLOCATING((dma_addr_t)p), size); -@@ -566,8 +555,19 @@ static int bcm2708_ioctl(struct fb_info - &dummy, sizeof(dummy)); - break; - case FBIODMACOPY: -- ret = vc_mem_copy(fb, arg); -+ { -+ struct fb_dmacopy ioparam; -+ /* Get the parameter data. -+ */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam))) { -+ pr_err("[%s]: failed to copy-from-user\n", __func__); -+ ret = -EFAULT; -+ break; -+ } -+ ret = vc_mem_copy(fb, &ioparam); - break; -+ } - default: - dev_dbg(info->device, "Unknown ioctl 0x%x\n", cmd); - return -ENOTTY; -@@ -578,6 +578,48 @@ static int bcm2708_ioctl(struct fb_info - - return ret; - } -+ -+#ifdef CONFIG_COMPAT -+struct fb_dmacopy32 { -+ compat_uptr_t dst; -+ __u32 src; -+ __u32 length; -+}; -+ -+#define FBIODMACOPY32 _IOW('z', 0x22, struct fb_dmacopy32) -+ -+static int bcm2708_compat_ioctl(struct fb_info *info, unsigned int cmd, -+ unsigned long arg) -+{ -+ struct bcm2708_fb *fb = to_bcm2708(info); -+ int ret; -+ -+ switch (cmd) { -+ case FBIODMACOPY32: -+ { -+ struct fb_dmacopy32 param32; -+ struct fb_dmacopy param; -+ /* Get the parameter data. -+ */ -+ if (copy_from_user(¶m32, (void *)arg, sizeof(param32))) { -+ pr_err("[%s]: failed to copy-from-user\n", __func__); -+ ret = -EFAULT; -+ break; -+ } -+ param.dst = compat_ptr(param32.dst); -+ param.src = param32.src; -+ param.length = param32.length; -+ ret = vc_mem_copy(fb, ¶m); -+ break; -+ } -+ default: -+ ret = bcm2708_ioctl(info, cmd, arg); -+ break; -+ } -+ return ret; -+} -+#endif -+ - static void bcm2708_fb_fillrect(struct fb_info *info, - const struct fb_fillrect *rect) - { -@@ -768,6 +810,9 @@ static struct fb_ops bcm2708_fb_ops = { - .fb_imageblit = bcm2708_fb_imageblit, - .fb_pan_display = bcm2708_fb_pan_display, - .fb_ioctl = bcm2708_ioctl, -+#ifdef CONFIG_COMPAT -+ .fb_compat_ioctl = bcm2708_compat_ioctl, -+#endif - }; - - static int bcm2708_fb_register(struct bcm2708_fb *fb) diff --git a/target/linux/brcm2708/patches-4.19/950-0330-lan78xx-EEE-support-is-now-a-PHY-property.patch b/target/linux/brcm2708/patches-4.19/950-0330-lan78xx-EEE-support-is-now-a-PHY-property.patch new file mode 100644 index 0000000000..7d4bab5222 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0330-lan78xx-EEE-support-is-now-a-PHY-property.patch @@ -0,0 +1,26 @@ +From 5917a0b0e56928aecd1270c85a79fce77a404629 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 5 Mar 2019 09:51:22 +0000 +Subject: [PATCH] lan78xx: EEE support is now a PHY property + +Now that EEE support is a property of the PHY, use the PHY's DT node +when querying the EEE-related properties. + +See: https://github.com/raspberrypi/linux/issues/2882 + +Signed-off-by: Phil Elwell +--- + drivers/net/usb/lan78xx.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/usb/lan78xx.c ++++ b/drivers/net/usb/lan78xx.c +@@ -2194,7 +2194,7 @@ static int lan78xx_phy_init(struct lan78 + mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control); + phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv); + +- if (of_property_read_bool(dev->udev->dev.of_node, ++ if (of_property_read_bool(phydev->mdio.dev.of_node, + "microchip,eee-enabled")) { + struct ethtool_eee edata; + memset(&edata, 0, sizeof(edata)); diff --git a/target/linux/brcm2708/patches-4.19/950-0330-video-bcm2708_fb-Fix-warnings-on-64-bit-builds.patch b/target/linux/brcm2708/patches-4.19/950-0330-video-bcm2708_fb-Fix-warnings-on-64-bit-builds.patch deleted file mode 100644 index 7001c94953..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0330-video-bcm2708_fb-Fix-warnings-on-64-bit-builds.patch +++ /dev/null @@ -1,46 +0,0 @@ -From ca128febc6abc040d747ddc0808fd203c135668e Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 25 Jan 2019 17:11:39 +0000 -Subject: [PATCH 330/806] video: bcm2708_fb: Fix warnings on 64 bit builds - -Fix up logging lines where the wrong format specifiers were -being used. - -Signed-off-by: Dave Stevenson ---- - drivers/video/fbdev/bcm2708_fb.c | 10 ++++------ - 1 file changed, 4 insertions(+), 6 deletions(-) - ---- a/drivers/video/fbdev/bcm2708_fb.c -+++ b/drivers/video/fbdev/bcm2708_fb.c -@@ -513,8 +513,8 @@ static long vc_mem_copy(struct bcm2708_f - buf = dma_alloc_coherent(fb->fb.device, PAGE_ALIGN(size), &bus_addr, - GFP_ATOMIC); - if (!buf) { -- pr_err("[%s]: failed to dma_alloc_coherent(%d)\n", -- __func__, size); -+ pr_err("[%s]: failed to dma_alloc_coherent(%zd)\n", __func__, -+ size); - rc = -ENOMEM; - goto out; - } -@@ -910,8 +910,7 @@ static int bcm2708_fb_probe(struct platf - goto free_fb; - } - -- pr_info("BCM2708FB: allocated DMA memory %08x\n", -- fb->cb_handle); -+ pr_info("BCM2708FB: allocated DMA memory %pad\n", &fb->cb_handle); - - ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_BULK, - &fb->dma_chan_base, &fb->dma_irq); -@@ -929,8 +928,7 @@ static int bcm2708_fb_probe(struct platf - } - - -- pr_info("BCM2708FB: allocated DMA channel %d @ %p\n", -- fb->dma_chan, fb->dma_chan_base); -+ pr_info("BCM2708FB: allocated DMA channel %d\n", fb->dma_chan); - - fb->dev = dev; - fb->fb.device = &dev->dev; diff --git a/target/linux/brcm2708/patches-4.19/950-0331-video-bcm2708_fb-Clean-up-coding-style-issues.patch b/target/linux/brcm2708/patches-4.19/950-0331-video-bcm2708_fb-Clean-up-coding-style-issues.patch deleted file mode 100644 index 0ee91bf15e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0331-video-bcm2708_fb-Clean-up-coding-style-issues.patch +++ /dev/null @@ -1,275 +0,0 @@ -From 47f7687efaf3873fe8c0e47653515e9ada1b86da Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 25 Jan 2019 17:32:54 +0000 -Subject: [PATCH 331/806] video: bcm2708_fb: Clean up coding style issues - -Now checkpatch clean except for 2 long lines, missing -SPDX header, and no DT documentation. - -Signed-off-by: Dave Stevenson ---- - drivers/video/fbdev/bcm2708_fb.c | 96 ++++++++++++++------------------ - 1 file changed, 42 insertions(+), 54 deletions(-) - ---- a/drivers/video/fbdev/bcm2708_fb.c -+++ b/drivers/video/fbdev/bcm2708_fb.c -@@ -41,7 +41,7 @@ - #define MODULE_NAME "bcm2708_fb" - - #ifdef BCM2708_FB_DEBUG --#define print_debug(fmt, ...) pr_debug("%s:%s:%d: "fmt, \ -+#define print_debug(fmt, ...) pr_debug("%s:%s:%d: " fmt, \ - MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__) - #else - #define print_debug(fmt, ...) -@@ -57,7 +57,7 @@ static int fbheight = 480; /* module par - static int fbdepth = 32; /* module parameter */ - static int fbswap; /* module parameter */ - --static u32 dma_busy_wait_threshold = 1<<15; -+static u32 dma_busy_wait_threshold = 1 << 15; - module_param(dma_busy_wait_threshold, int, 0644); - MODULE_PARM_DESC(dma_busy_wait_threshold, "Busy-wait for DMA completion below this area"); - -@@ -132,8 +132,8 @@ static int bcm2708_fb_debugfs_init(struc - fb->stats.regset.nregs = ARRAY_SIZE(stats_registers); - fb->stats.regset.base = &fb->stats; - -- if (!debugfs_create_regset32( -- "stats", 0444, fb->debugfs_dir, &fb->stats.regset)) { -+ if (!debugfs_create_regset32("stats", 0444, fb->debugfs_dir, -+ &fb->stats.regset)) { - pr_warn("%s: could not create statistics registers\n", - __func__); - goto fail; -@@ -223,25 +223,22 @@ static int bcm2708_fb_check_var(struct f - { - /* info input, var output */ - print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", -- __func__, -- info, -- info->var.xres, info->var.yres, info->var.xres_virtual, -- info->var.yres_virtual, (int)info->screen_size, -- info->var.bits_per_pixel); -- print_debug("%s(%p) %dx%d (%dx%d), %d\n", __func__, var, -- var->xres, var->yres, var->xres_virtual, var->yres_virtual, -- var->bits_per_pixel); -+ __func__, info, info->var.xres, info->var.yres, -+ info->var.xres_virtual, info->var.yres_virtual, -+ (int)info->screen_size, info->var.bits_per_pixel); -+ print_debug("%s(%p) %dx%d (%dx%d), %d\n", __func__, var, var->xres, -+ var->yres, var->xres_virtual, var->yres_virtual, -+ var->bits_per_pixel); - - if (!var->bits_per_pixel) - var->bits_per_pixel = 16; - - if (bcm2708_fb_set_bitfields(var) != 0) { - pr_err("%s: invalid bits_per_pixel %d\n", __func__, -- var->bits_per_pixel); -+ var->bits_per_pixel); - return -EINVAL; - } - -- - if (var->xres_virtual < var->xres) - var->xres_virtual = var->xres; - /* use highest possible virtual resolution */ -@@ -249,7 +246,7 @@ static int bcm2708_fb_check_var(struct f - var->yres_virtual = 480; - - pr_err("%s: virtual resolution set to maximum of %dx%d\n", -- __func__, var->xres_virtual, var->yres_virtual); -+ __func__, var->xres_virtual, var->yres_virtual); - } - if (var->yres_virtual < var->yres) - var->yres_virtual = var->yres; -@@ -294,9 +291,9 @@ static int bcm2708_fb_set_par(struct fb_ - int ret; - - print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", __func__, info, -- info->var.xres, info->var.yres, info->var.xres_virtual, -- info->var.yres_virtual, (int)info->screen_size, -- info->var.bits_per_pixel); -+ info->var.xres, info->var.yres, info->var.xres_virtual, -+ info->var.yres_virtual, (int)info->screen_size, -+ info->var.bits_per_pixel); - - ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); - if (ret) { -@@ -328,12 +325,10 @@ static int bcm2708_fb_set_par(struct fb_ - return -ENOMEM; - } - -- print_debug( -- "%s: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d\n", -- __func__, -- (void *)fb->fb.screen_base, (void *)fb->fb_bus_address, -- fbinfo.xres, fbinfo.yres, fbinfo.bpp, -- fbinfo.pitch, (int)fb->fb.screen_size); -+ print_debug("%s: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d\n", -+ __func__, (void *)fb->fb.screen_base, -+ (void *)fb->fb_bus_address, fbinfo.xres, fbinfo.yres, -+ fbinfo.bpp, fbinfo.pitch, (int)fb->fb.screen_size); - - return 0; - } -@@ -345,7 +340,6 @@ static inline u32 convert_bitfield(int v - return (val >> (16 - bf->length) & mask) << bf->offset; - } - -- - static int bcm2708_fb_setcolreg(unsigned int regno, unsigned int red, - unsigned int green, unsigned int blue, - unsigned int transp, struct fb_info *info) -@@ -379,11 +373,11 @@ static int bcm2708_fb_setcolreg(unsigned - packet->offset = 0; - packet->length = regno + 1; - memcpy(packet->cmap, fb->gpu_cmap, -- sizeof(packet->cmap)); -+ sizeof(packet->cmap)); - ret = rpi_firmware_property(fb->fw, -- RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE, -- packet, -- (2 + packet->length) * sizeof(u32)); -+ RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE, -+ packet, -+ (2 + packet->length) * sizeof(u32)); - if (ret || packet->offset) - dev_err(info->device, - "Failed to set palette (%d,%u)\n", -@@ -392,9 +386,9 @@ static int bcm2708_fb_setcolreg(unsigned - } - } else if (regno < 16) { - fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) | -- convert_bitfield(blue, &fb->fb.var.blue) | -- convert_bitfield(green, &fb->fb.var.green) | -- convert_bitfield(red, &fb->fb.var.red); -+ convert_bitfield(blue, &fb->fb.var.blue) | -+ convert_bitfield(green, &fb->fb.var.green) | -+ convert_bitfield(red, &fb->fb.var.red); - } - return regno > 255; - } -@@ -437,8 +431,8 @@ static int bcm2708_fb_pan_display(struct - info->var.yoffset = var->yoffset; - result = bcm2708_fb_set_par(info); - if (result != 0) -- pr_err("%s(%d,%d) returns=%d\n", __func__, -- var->xoffset, var->yoffset, result); -+ pr_err("%s(%d,%d) returns=%d\n", __func__, var->xoffset, -+ var->yoffset, result); - return result; - } - -@@ -468,9 +462,8 @@ static void dma_memcpy(struct bcm2708_fb - cb->info |= BCM2708_DMA_INT_EN; - bcm_dma_start(fb->dma_chan_base, fb->cb_handle); - while (bcm_dma_is_busy(dma_chan)) { -- wait_event_interruptible( -- fb->dma_waitq, -- !bcm_dma_is_busy(dma_chan)); -+ wait_event_interruptible(fb->dma_waitq, -+ !bcm_dma_is_busy(dma_chan)); - } - fb->stats.dma_irqs++; - } -@@ -478,9 +471,9 @@ static void dma_memcpy(struct bcm2708_fb - } - - /* address with no aliases */ --#define INTALIAS_NORMAL(x) ((x)&~0xc0000000) -+#define INTALIAS_NORMAL(x) ((x) & ~0xc0000000) - /* cache coherent but non-allocating in L1 and L2 */ --#define INTALIAS_L1L2_NONALLOCATING(x) (((x)&~0xc0000000)|0x80000000) -+#define INTALIAS_L1L2_NONALLOCATING(x) (((x) & ~0xc0000000) | 0x80000000) - - static long vc_mem_copy(struct bcm2708_fb *fb, struct fb_dmacopy *ioparam) - { -@@ -498,15 +491,15 @@ static long vc_mem_copy(struct bcm2708_f - - if (!fb->gpu.base || !fb->gpu.length) { - pr_err("[%s]: Unable to determine gpu memory (%x,%x)\n", -- __func__, fb->gpu.base, fb->gpu.length); -+ __func__, fb->gpu.base, fb->gpu.length); - return -EFAULT; - } - - if (INTALIAS_NORMAL(ioparam->src) < fb->gpu.base || - INTALIAS_NORMAL(ioparam->src) >= fb->gpu.base + fb->gpu.length) { - pr_err("[%s]: Invalid memory access %x (%x-%x)", __func__, -- INTALIAS_NORMAL(ioparam->src), fb->gpu.base, -- fb->gpu.base + fb->gpu.length); -+ INTALIAS_NORMAL(ioparam->src), fb->gpu.base, -+ fb->gpu.base + fb->gpu.length); - return -EFAULT; - } - -@@ -528,8 +521,7 @@ static long vc_mem_copy(struct bcm2708_f - dma_memcpy(fb, bus_addr, - INTALIAS_L1L2_NONALLOCATING((dma_addr_t)p), size); - if (copy_to_user(q, buf, s) != 0) { -- pr_err("[%s]: failed to copy-to-user\n", -- __func__); -+ pr_err("[%s]: failed to copy-to-user\n", __func__); - rc = -EFAULT; - goto out; - } -@@ -755,7 +747,6 @@ static void bcm2708_fb_copyarea(struct f - /* end of dma control blocks chain */ - cb->next = 0; - -- - if (pixels < dma_busy_wait_threshold) { - bcm_dma_start(fb->dma_chan_base, fb->cb_handle); - bcm_dma_wait_idle(fb->dma_chan_base); -@@ -765,9 +756,8 @@ static void bcm2708_fb_copyarea(struct f - cb->info |= BCM2708_DMA_INT_EN; - bcm_dma_start(fb->dma_chan_base, fb->cb_handle); - while (bcm_dma_is_busy(dma_chan)) { -- wait_event_interruptible( -- fb->dma_waitq, -- !bcm_dma_is_busy(dma_chan)); -+ wait_event_interruptible(fb->dma_waitq, -+ !bcm_dma_is_busy(dma_chan)); - } - fb->stats.dma_irqs++; - } -@@ -863,7 +853,7 @@ static int bcm2708_fb_register(struct bc - return ret; - - print_debug("BCM2708FB: registering framebuffer (%dx%d@%d) (%d)\n", -- fbwidth, fbheight, fbdepth, fbswap); -+ fbwidth, fbheight, fbdepth, fbswap); - - ret = register_framebuffer(&fb->fb); - print_debug("BCM2708FB: register framebuffer (%d)\n", ret); -@@ -893,7 +883,7 @@ static int bcm2708_fb_probe(struct platf - if (!fw) - return -EPROBE_DEFER; - -- fb = kzalloc(sizeof(struct bcm2708_fb), GFP_KERNEL); -+ fb = kzalloc(sizeof(*fb), GFP_KERNEL); - if (!fb) { - ret = -ENOMEM; - goto free_region; -@@ -927,7 +917,6 @@ static int bcm2708_fb_probe(struct platf - goto free_dma_chan; - } - -- - pr_info("BCM2708FB: allocated DMA channel %d\n", fb->dma_chan); - - fb->dev = dev; -@@ -936,9 +925,8 @@ static int bcm2708_fb_probe(struct platf - /* failure here isn't fatal, but we'll fail in vc_mem_copy if - * fb->gpu is not valid - */ -- rpi_firmware_property(fb->fw, -- RPI_FIRMWARE_GET_VC_MEMORY, -- &fb->gpu, sizeof(fb->gpu)); -+ rpi_firmware_property(fb->fw, RPI_FIRMWARE_GET_VC_MEMORY, &fb->gpu, -+ sizeof(fb->gpu)); - - ret = bcm2708_fb_register(fb); - if (ret == 0) { diff --git a/target/linux/brcm2708/patches-4.19/950-0331-video-bcm2708_fb-Try-allocating-on-the-ARM-and-passi.patch b/target/linux/brcm2708/patches-4.19/950-0331-video-bcm2708_fb-Try-allocating-on-the-ARM-and-passi.patch new file mode 100644 index 0000000000..d709214664 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0331-video-bcm2708_fb-Try-allocating-on-the-ARM-and-passi.patch @@ -0,0 +1,162 @@ +From a9a47ea599c12d29526138cd6e48f6c9eac19358 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 27 Feb 2019 17:30:33 +0000 +Subject: [PATCH] video: bcm2708_fb: Try allocating on the ARM and + passing to VPU + +Currently the VPU allocates the contiguous buffer for the +framebuffer. +Try an alternate path first where we use dma_alloc_coherent +and pass the buffer to the VPU. Should the VPU firmware not +support that path, then free the buffer and revert to the +old behaviour of using the VPU allocation. + +Signed-off-by: Dave Stevenson +--- + drivers/video/fbdev/bcm2708_fb.c | 102 ++++++++++++++++++--- + include/soc/bcm2835/raspberrypi-firmware.h | 1 + + 2 files changed, 91 insertions(+), 12 deletions(-) + +--- a/drivers/video/fbdev/bcm2708_fb.c ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -98,6 +98,11 @@ struct bcm2708_fb { + struct bcm2708_fb_stats stats; + unsigned long fb_bus_address; + struct { u32 base, length; } gpu; ++ ++ bool disable_arm_alloc; ++ unsigned int image_size; ++ dma_addr_t dma_addr; ++ void *cpuaddr; + }; + + #define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) +@@ -283,23 +288,88 @@ static int bcm2708_fb_set_par(struct fb_ + .xoffset = info->var.xoffset, + .yoffset = info->var.yoffset, + .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, +- .base = 0, +- .screen_size = 0, +- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, +- .pitch = 0, ++ /* base and screen_size will be initialised later */ ++ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, ++ /* pitch will be initialised later */ + }; +- int ret; ++ int ret, image_size; ++ + + print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", __func__, info, + info->var.xres, info->var.yres, info->var.xres_virtual, + info->var.yres_virtual, (int)info->screen_size, + info->var.bits_per_pixel); + +- ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); ++ /* Try allocating our own buffer. We can specify all the parameters */ ++ image_size = ((info->var.xres * info->var.yres) * ++ info->var.bits_per_pixel) >> 3; ++ ++ if (!fb->disable_arm_alloc && ++ (image_size != fb->image_size || !fb->dma_addr)) { ++ if (fb->dma_addr) { ++ dma_free_coherent(info->device, fb->image_size, ++ fb->cpuaddr, fb->dma_addr); ++ fb->image_size = 0; ++ fb->cpuaddr = NULL; ++ fb->dma_addr = 0; ++ } ++ ++ fb->cpuaddr = dma_alloc_coherent(info->device, image_size, ++ &fb->dma_addr, GFP_KERNEL); ++ ++ if (!fb->cpuaddr) { ++ fb->dma_addr = 0; ++ fb->disable_arm_alloc = true; ++ } else { ++ fb->image_size = image_size; ++ } ++ } ++ ++ if (fb->cpuaddr) { ++ fbinfo.base = fb->dma_addr; ++ fbinfo.screen_size = image_size; ++ fbinfo.pitch = (info->var.xres * info->var.bits_per_pixel) >> 3; ++ ++ ret = rpi_firmware_property_list(fb->fw, &fbinfo, ++ sizeof(fbinfo)); ++ if (ret || fbinfo.base != fb->dma_addr) { ++ /* Firmware either failed, or assigned a different base ++ * address (ie it doesn't support being passed an FB ++ * allocation). ++ * Destroy the allocation, and don't try again. ++ */ ++ dma_free_coherent(info->device, fb->image_size, ++ fb->cpuaddr, fb->dma_addr); ++ fb->image_size = 0; ++ fb->cpuaddr = NULL; ++ fb->dma_addr = 0; ++ fb->disable_arm_alloc = true; ++ } ++ } else { ++ /* Our allocation failed - drop into the old scheme of ++ * allocation by the VPU. ++ */ ++ ret = -ENOMEM; ++ } ++ + if (ret) { +- dev_err(info->device, +- "Failed to allocate GPU framebuffer (%d)\n", ret); +- return ret; ++ /* Old scheme: ++ * - FRAMEBUFFER_ALLOCATE passes 0 for base and screen_size. ++ * - GET_PITCH instead of SET_PITCH. ++ */ ++ fbinfo.base = 0; ++ fbinfo.screen_size = 0; ++ fbinfo.tag6.tag = RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH; ++ fbinfo.pitch = 0; ++ ++ ret = rpi_firmware_property_list(fb->fw, &fbinfo, ++ sizeof(fbinfo)); ++ if (ret) { ++ dev_err(info->device, ++ "Failed to allocate GPU framebuffer (%d)\n", ++ ret); ++ return ret; ++ } + } + + if (info->var.bits_per_pixel <= 8) +@@ -314,9 +384,17 @@ static int bcm2708_fb_set_par(struct fb_ + fb->fb.fix.smem_start = fbinfo.base; + fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; + fb->fb.screen_size = fbinfo.screen_size; +- if (fb->fb.screen_base) +- iounmap(fb->fb.screen_base); +- fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); ++ ++ if (!fb->dma_addr) { ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ ++ fb->fb.screen_base = ioremap_wc(fbinfo.base, ++ fb->fb.screen_size); ++ } else { ++ fb->fb.screen_base = fb->cpuaddr; ++ } ++ + if (!fb->fb.screen_base) { + /* the console may currently be locked */ + console_trylock(); +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -128,6 +128,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, + RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, + RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, diff --git a/target/linux/brcm2708/patches-4.19/950-0332-bcm2835-dma-Add-support-for-per-channel-flags.patch b/target/linux/brcm2708/patches-4.19/950-0332-bcm2835-dma-Add-support-for-per-channel-flags.patch deleted file mode 100644 index 566e67c4fe..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0332-bcm2835-dma-Add-support-for-per-channel-flags.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 4ebec374d97c0bba1e41558071bfa062894b07a0 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 20 Jul 2018 22:03:41 +0100 -Subject: [PATCH 332/806] bcm2835-dma: Add support for per-channel flags - -Add the ability to interpret the high bits of the dreq specifier as -flags to be included in the DMA_CS register. The motivation for this -change is the ability to set the DISDEBUG flag for SD card transfers -to avoid corruption when using the VPU debugger. - -Signed-off-by: Phil Elwell ---- - drivers/dma/bcm2835-dma.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/dma/bcm2835-dma.c -+++ b/drivers/dma/bcm2835-dma.c -@@ -146,6 +146,10 @@ struct bcm2835_desc { - #define BCM2835_DMA_S_DREQ BIT(10) /* enable SREQ for source */ - #define BCM2835_DMA_S_IGNORE BIT(11) /* ignore source reads - read 0 */ - #define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12) -+#define BCM2835_DMA_CS_FLAGS(x) (x & (BCM2835_DMA_PRIORITY(15) | \ -+ BCM2835_DMA_PANIC_PRIORITY(15) | \ -+ BCM2835_DMA_WAIT_FOR_WRITES | \ -+ BCM2835_DMA_DIS_DEBUG)) - #define BCM2835_DMA_PER_MAP(x) ((x & 31) << 16) /* REQ source */ - #define BCM2835_DMA_WAIT(x) ((x & 31) << 21) /* add DMA-wait cycles */ - #define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */ -@@ -461,7 +465,8 @@ static void bcm2835_dma_start_desc(struc - c->desc = d = to_bcm2835_dma_desc(&vd->tx); - - writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); -- writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS); -+ writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq), -+ c->chan_base + BCM2835_DMA_CS); - } - - static irqreturn_t bcm2835_dma_callback(int irq, void *data) -@@ -488,7 +493,8 @@ static irqreturn_t bcm2835_dma_callback( - * if this IRQ handler is threaded.) If the channel is finished, it - * will remain idle despite the ACTIVE flag being set. - */ -- writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE, -+ writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE | -+ BCM2835_DMA_CS_FLAGS(c->dreq), - c->chan_base + BCM2835_DMA_CS); - - d = c->desc; diff --git a/target/linux/brcm2708/patches-4.19/950-0332-staging-vc_sm_cma-Remove-erroneous-misc_deregister.patch b/target/linux/brcm2708/patches-4.19/950-0332-staging-vc_sm_cma-Remove-erroneous-misc_deregister.patch new file mode 100644 index 0000000000..4f49925d97 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0332-staging-vc_sm_cma-Remove-erroneous-misc_deregister.patch @@ -0,0 +1,44 @@ +From 7b2fac96ce48939e399707c4b8bd9905d6274a05 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 8 Mar 2019 10:38:59 +0000 +Subject: [PATCH] staging: vc_sm_cma: Remove erroneous misc_deregister + +Code from the misc /dev node was still present in +bcm2835_vc_sm_cma_remove, which caused a NULL deref. +Remove it. + +See #2885. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 5 ----- + 1 file changed, 5 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -25,7 +25,6 @@ + #include + #include + #include +-#include + #include + #include + #include +@@ -72,7 +71,6 @@ struct sm_pde_t { + struct sm_state_t { + struct platform_device *pdev; + +- struct miscdevice dev; + struct sm_instance *sm_handle; /* Handle for videocore service. */ + + spinlock_t kernelid_map_lock; /* Spinlock protecting kernelid_map */ +@@ -758,9 +756,6 @@ static int bcm2835_vc_sm_cma_remove(stru + { + pr_debug("[%s]: start\n", __func__); + if (sm_inited) { +- /* Remove shared memory device. */ +- misc_deregister(&sm_state->dev); +- + /* Remove all proc entries. */ + //debugfs_remove_recursive(sm_state->dir_root); + diff --git a/target/linux/brcm2708/patches-4.19/950-0333-bcm283x-Set-the-DISDEBUG-flag-for-SD-transfers.patch b/target/linux/brcm2708/patches-4.19/950-0333-bcm283x-Set-the-DISDEBUG-flag-for-SD-transfers.patch deleted file mode 100644 index 0aab4b67c1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0333-bcm283x-Set-the-DISDEBUG-flag-for-SD-transfers.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 18a739ba2e76a5e2bb3a02d9083faeabdee93777 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 20 Jul 2018 22:08:05 +0100 -Subject: [PATCH 333/806] bcm283x: Set the DISDEBUG flag for SD transfers - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm283x.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -400,7 +400,7 @@ - reg = <0x7e202000 0x100>; - interrupts = <2 24>; - clocks = <&clocks BCM2835_CLOCK_VPU>; -- dmas = <&dma 13>; -+ dmas = <&dma (13|(1<<29))>; - dma-names = "rx-tx"; - status = "disabled"; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0333-vcsm-Fix-makefile-include-on-out-of-tree-builds.patch b/target/linux/brcm2708/patches-4.19/950-0333-vcsm-Fix-makefile-include-on-out-of-tree-builds.patch new file mode 100644 index 0000000000..962c3deafb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0333-vcsm-Fix-makefile-include-on-out-of-tree-builds.patch @@ -0,0 +1,27 @@ +From d36a5a94156ebe7e9906574fa8b01b200a15c11d Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Mon, 18 Mar 2019 17:14:51 +0000 +Subject: [PATCH] vcsm: Fix makefile include on out-of-tree builds + +The vc_sm module tries to include the 'fs' directory from the +$(srctree). $(srctree) is already provided by the build system, and +causes the include path to be duplicated. + +With -Werror this fails to compile. + +Remove the unnecessary variable. + +Signed-off-by: Kieran Bingham +--- + drivers/char/broadcom/vc_sm/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/char/broadcom/vc_sm/Makefile ++++ b/drivers/char/broadcom/vc_sm/Makefile +@@ -1,5 +1,5 @@ + ccflags-$(CONFIG_BCM_VC_SM) += -Werror -Wall -Wstrict-prototypes -Wno-trigraphs -O2 +-ccflags-$(CONFIG_BCM_VC_SM) += -I"drivers/staging/vc04_services" -I"drivers/staging/vc04_services/interface/vchi" -I"drivers/staging/vc04_services/interface/vchiq_arm" -I"$(srctree)/fs/" ++ccflags-$(CONFIG_BCM_VC_SM) += -I"drivers/staging/vc04_services" -I"drivers/staging/vc04_services/interface/vchi" -I"drivers/staging/vc04_services/interface/vchiq_arm" -I"fs" + ccflags-$(CONFIG_BCM_VC_SM) += -DOS_ASSERT_FAILURE -D__STDC_VERSION=199901L -D__STDC_VERSION__=199901L -D__VCCOREVER__=0 -D__KERNEL__ -D__linux__ + + obj-$(CONFIG_BCM_VC_SM) := vc-sm.o diff --git a/target/linux/brcm2708/patches-4.19/950-0334-ASoC-pcm512x-Implement-the-digital_mute-interface.patch b/target/linux/brcm2708/patches-4.19/950-0334-ASoC-pcm512x-Implement-the-digital_mute-interface.patch deleted file mode 100644 index 3b9d93164d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0334-ASoC-pcm512x-Implement-the-digital_mute-interface.patch +++ /dev/null @@ -1,196 +0,0 @@ -From 4a15efde52bb79bf44e63b998cd84f896404d728 Mon Sep 17 00:00:00 2001 -From: Dimitris Papavasiliou -Date: Sat, 24 Nov 2018 22:05:42 +0200 -Subject: [PATCH 334/806] ASoC: pcm512x: Implement the digital_mute interface - -[ Upstream commit 3500f1c589e92e0b6b1f8d31b4084fbde08d49cb ] - -Clicks and pops of various volumes can be produced while the device is -opened, closed, put into and taken out of standby, or reconfigured. -Fix this, by implementing the digital_mute interface, so that the -output is muted during such operations. - -Signed-off-by: Dimitris Papavasiliou -Signed-off-by: Mark Brown ---- - sound/soc/codecs/pcm512x.c | 121 ++++++++++++++++++++++++++++++++++++- - sound/soc/codecs/pcm512x.h | 2 + - 2 files changed, 121 insertions(+), 2 deletions(-) - ---- a/sound/soc/codecs/pcm512x.c -+++ b/sound/soc/codecs/pcm512x.c -@@ -53,6 +53,8 @@ struct pcm512x_priv { - unsigned long overclock_pll; - unsigned long overclock_dac; - unsigned long overclock_dsp; -+ int mute; -+ struct mutex mutex; - int lrclk_div; - }; - -@@ -385,6 +387,61 @@ static const struct soc_enum pcm512x_ved - SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_2, PCM512x_VEDS_SHIFT, 4, - pcm512x_ramp_step_text); - -+static int pcm512x_update_mute(struct pcm512x_priv *pcm512x) -+{ -+ return regmap_update_bits( -+ pcm512x->regmap, PCM512x_MUTE, PCM512x_RQML | PCM512x_RQMR, -+ (!!(pcm512x->mute & 0x5) << PCM512x_RQML_SHIFT) -+ | (!!(pcm512x->mute & 0x3) << PCM512x_RQMR_SHIFT)); -+} -+ -+static int pcm512x_digital_playback_switch_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); -+ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); -+ -+ mutex_lock(&pcm512x->mutex); -+ ucontrol->value.integer.value[0] = !(pcm512x->mute & 0x4); -+ ucontrol->value.integer.value[1] = !(pcm512x->mute & 0x2); -+ mutex_unlock(&pcm512x->mutex); -+ -+ return 0; -+} -+ -+static int pcm512x_digital_playback_switch_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); -+ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); -+ int ret, changed = 0; -+ -+ mutex_lock(&pcm512x->mutex); -+ -+ if ((pcm512x->mute & 0x4) == (ucontrol->value.integer.value[0] << 2)) { -+ pcm512x->mute ^= 0x4; -+ changed = 1; -+ } -+ if ((pcm512x->mute & 0x2) == (ucontrol->value.integer.value[1] << 1)) { -+ pcm512x->mute ^= 0x2; -+ changed = 1; -+ } -+ -+ if (changed) { -+ ret = pcm512x_update_mute(pcm512x); -+ if (ret != 0) { -+ dev_err(component->dev, -+ "Failed to update digital mute: %d\n", ret); -+ mutex_unlock(&pcm512x->mutex); -+ return ret; -+ } -+ } -+ -+ mutex_unlock(&pcm512x->mutex); -+ -+ return changed; -+} -+ - static const struct snd_kcontrol_new pcm512x_controls[] = { - SOC_DOUBLE_R_TLV("Digital Playback Volume", PCM512x_DIGITAL_VOLUME_2, - PCM512x_DIGITAL_VOLUME_3, 0, 255, 1, digital_tlv), -@@ -392,8 +449,15 @@ SOC_DOUBLE_TLV("Analogue Playback Volume - PCM512x_LAGN_SHIFT, PCM512x_RAGN_SHIFT, 1, 1, analog_tlv), - SOC_DOUBLE_TLV("Analogue Playback Boost Volume", PCM512x_ANALOG_GAIN_BOOST, - PCM512x_AGBL_SHIFT, PCM512x_AGBR_SHIFT, 1, 0, boost_tlv), --SOC_DOUBLE("Digital Playback Switch", PCM512x_MUTE, PCM512x_RQML_SHIFT, -- PCM512x_RQMR_SHIFT, 1, 1), -+{ -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = "Digital Playback Switch", -+ .index = 0, -+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, -+ .info = snd_ctl_boolean_stereo_info, -+ .get = pcm512x_digital_playback_switch_get, -+ .put = pcm512x_digital_playback_switch_put -+}, - - SOC_SINGLE("Deemphasis Switch", PCM512x_DSP, PCM512x_DEMP_SHIFT, 1, 1), - SOC_ENUM("DSP Program", pcm512x_dsp_program), -@@ -1323,6 +1387,56 @@ static int pcm512x_set_fmt(struct snd_so - return 0; - } - -+static int pcm512x_digital_mute(struct snd_soc_dai *dai, int mute) -+{ -+ struct snd_soc_component *component = dai->component; -+ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); -+ int ret; -+ unsigned int mute_det; -+ -+ mutex_lock(&pcm512x->mutex); -+ -+ if (mute) { -+ pcm512x->mute |= 0x1; -+ ret = regmap_update_bits(pcm512x->regmap, PCM512x_MUTE, -+ PCM512x_RQML | PCM512x_RQMR, -+ PCM512x_RQML | PCM512x_RQMR); -+ if (ret != 0) { -+ dev_err(component->dev, -+ "Failed to set digital mute: %d\n", ret); -+ mutex_unlock(&pcm512x->mutex); -+ return ret; -+ } -+ -+ regmap_read_poll_timeout(pcm512x->regmap, -+ PCM512x_ANALOG_MUTE_DET, -+ mute_det, (mute_det & 0x3) == 0, -+ 200, 10000); -+ -+ mutex_unlock(&pcm512x->mutex); -+ } else { -+ pcm512x->mute &= ~0x1; -+ ret = pcm512x_update_mute(pcm512x); -+ if (ret != 0) { -+ dev_err(component->dev, -+ "Failed to update digital mute: %d\n", ret); -+ mutex_unlock(&pcm512x->mutex); -+ return ret; -+ } -+ -+ regmap_read_poll_timeout(pcm512x->regmap, -+ PCM512x_ANALOG_MUTE_DET, -+ mute_det, -+ (mute_det & 0x3) -+ == ((~pcm512x->mute >> 1) & 0x3), -+ 200, 10000); -+ } -+ -+ mutex_unlock(&pcm512x->mutex); -+ -+ return 0; -+} -+ - static int pcm512x_set_tdm_slot(struct snd_soc_dai *dai, - unsigned int tx_mask, unsigned int rx_mask, - int slots, int width) -@@ -1348,6 +1462,7 @@ static const struct snd_soc_dai_ops pcm5 - .startup = pcm512x_dai_startup, - .hw_params = pcm512x_hw_params, - .set_fmt = pcm512x_set_fmt, -+ .digital_mute = pcm512x_digital_mute, - .set_tdm_slot = pcm512x_set_tdm_slot, - }; - -@@ -1414,6 +1529,8 @@ int pcm512x_probe(struct device *dev, st - if (!pcm512x) - return -ENOMEM; - -+ mutex_init(&pcm512x->mutex); -+ - dev_set_drvdata(dev, pcm512x); - pcm512x->regmap = regmap; - ---- a/sound/soc/codecs/pcm512x.h -+++ b/sound/soc/codecs/pcm512x.h -@@ -112,7 +112,9 @@ - #define PCM512x_RQST_SHIFT 4 - - /* Page 0, Register 3 - mute */ -+#define PCM512x_RQMR (1 << 0) - #define PCM512x_RQMR_SHIFT 0 -+#define PCM512x_RQML (1 << 4) - #define PCM512x_RQML_SHIFT 4 - - /* Page 0, Register 4 - PLL */ diff --git a/target/linux/brcm2708/patches-4.19/950-0334-vcsm-Remove-set-but-unused-variable.patch b/target/linux/brcm2708/patches-4.19/950-0334-vcsm-Remove-set-but-unused-variable.patch new file mode 100644 index 0000000000..267cad41a6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0334-vcsm-Remove-set-but-unused-variable.patch @@ -0,0 +1,28 @@ +From 5a58b2bb907d57dc2b1cc2619bd5f1d948509e3e Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Mon, 18 Mar 2019 17:16:41 +0000 +Subject: [PATCH] vcsm: Remove set but unused variable + +The 'success' variable is set by the call to vchi_service_close() but never checked. +Remove it, keeping the call in place. + +Signed-off-by: Kieran Bingham +--- + drivers/char/broadcom/vc_sm/vc_vchi_sm.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/char/broadcom/vc_sm/vc_vchi_sm.c ++++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.c +@@ -361,11 +361,9 @@ int vc_vchi_sm_stop(struct sm_instance * + + /* Close all VCHI service connections */ + for (i = 0; i < instance->num_connections; i++) { +- int32_t success; +- + vchi_service_use(instance->vchi_handle[i]); + +- success = vchi_service_close(instance->vchi_handle[i]); ++ vchi_service_close(instance->vchi_handle[i]); + } + + kfree(instance); diff --git a/target/linux/brcm2708/patches-4.19/950-0335-ASoC-pcm512x-Fix-a-double-unlock-in-pcm512x_digital_.patch b/target/linux/brcm2708/patches-4.19/950-0335-ASoC-pcm512x-Fix-a-double-unlock-in-pcm512x_digital_.patch deleted file mode 100644 index 7674de284b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0335-ASoC-pcm512x-Fix-a-double-unlock-in-pcm512x_digital_.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 26001d54a7f803258b161f25f457ce11523695d7 Mon Sep 17 00:00:00 2001 -From: Dan Carpenter -Date: Fri, 21 Dec 2018 12:11:20 +0300 -Subject: [PATCH 335/806] ASoC: pcm512x: Fix a double unlock in - pcm512x_digital_mute() - -[ Upstream commit 28b698b7342c7d5300cfe217cd77ff7d2a55e03d ] - -We accidentally call mutex_unlock(&pcm512x->mutex); twice in a row. - -I re-wrote the error handling to use "goto unlock;" instead of returning -directly. Hopefully, it makes the code a little simpler. - -Fixes: 3500f1c589e9 ("ASoC: pcm512x: Implement the digital_mute interface") -Signed-off-by: Dan Carpenter -Reviwed-by: Dimitris Papavasiliou -Signed-off-by: Mark Brown ---- - sound/soc/codecs/pcm512x.c | 11 ++++------- - 1 file changed, 4 insertions(+), 7 deletions(-) - ---- a/sound/soc/codecs/pcm512x.c -+++ b/sound/soc/codecs/pcm512x.c -@@ -1404,24 +1404,20 @@ static int pcm512x_digital_mute(struct s - if (ret != 0) { - dev_err(component->dev, - "Failed to set digital mute: %d\n", ret); -- mutex_unlock(&pcm512x->mutex); -- return ret; -+ goto unlock; - } - - regmap_read_poll_timeout(pcm512x->regmap, - PCM512x_ANALOG_MUTE_DET, - mute_det, (mute_det & 0x3) == 0, - 200, 10000); -- -- mutex_unlock(&pcm512x->mutex); - } else { - pcm512x->mute &= ~0x1; - ret = pcm512x_update_mute(pcm512x); - if (ret != 0) { - dev_err(component->dev, - "Failed to update digital mute: %d\n", ret); -- mutex_unlock(&pcm512x->mutex); -- return ret; -+ goto unlock; - } - - regmap_read_poll_timeout(pcm512x->regmap, -@@ -1432,9 +1428,10 @@ static int pcm512x_digital_mute(struct s - 200, 10000); - } - -+unlock: - mutex_unlock(&pcm512x->mutex); - -- return 0; -+ return ret; - } - - static int pcm512x_set_tdm_slot(struct snd_soc_dai *dai, diff --git a/target/linux/brcm2708/patches-4.19/950-0335-vcsm-Reduce-scope-of-local-functions.patch b/target/linux/brcm2708/patches-4.19/950-0335-vcsm-Reduce-scope-of-local-functions.patch new file mode 100644 index 0000000000..311ae66770 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0335-vcsm-Reduce-scope-of-local-functions.patch @@ -0,0 +1,69 @@ +From 2a1fd1a32b7355c6ae8c5fc1654a96fa42e00586 Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Mon, 18 Mar 2019 17:17:40 +0000 +Subject: [PATCH] vcsm: Reduce scope of local functions + +The functions: + + vc_vchi_sm_send_msg + vc_sm_ioctl_alloc + vc_sm_ioctl_alloc_share + vc_sm_ioctl_import_dmabuf + +Are declared without a prototype. They are not used outside of this +module, thus - convert them to static functions. + +Signed-off-by: Kieran Bingham +--- + drivers/char/broadcom/vc_sm/vc_vchi_sm.c | 2 +- + drivers/char/broadcom/vc_sm/vmcs_sm.c | 14 +++++++------- + 2 files changed, 8 insertions(+), 8 deletions(-) + +--- a/drivers/char/broadcom/vc_sm/vc_vchi_sm.c ++++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.c +@@ -375,7 +375,7 @@ lock: + return -EINVAL; + } + +-int vc_vchi_sm_send_msg(struct sm_instance *handle, ++static int vc_vchi_sm_send_msg(struct sm_instance *handle, + enum vc_sm_msg_type msg_id, + void *msg, uint32_t msg_size, + void *result, uint32_t result_size, +--- a/drivers/char/broadcom/vc_sm/vmcs_sm.c ++++ b/drivers/char/broadcom/vc_sm/vmcs_sm.c +@@ -1574,8 +1574,8 @@ error: + } + + /* Allocate a shared memory handle and block. */ +-int vc_sm_ioctl_alloc(struct sm_priv_data_t *private, +- struct vmcs_sm_ioctl_alloc *ioparam) ++static int vc_sm_ioctl_alloc(struct sm_priv_data_t *private, ++ struct vmcs_sm_ioctl_alloc *ioparam) + { + int ret = 0; + int status; +@@ -1685,8 +1685,8 @@ error: + } + + /* Share an allocate memory handle and block.*/ +-int vc_sm_ioctl_alloc_share(struct sm_priv_data_t *private, +- struct vmcs_sm_ioctl_alloc_share *ioparam) ++static int vc_sm_ioctl_alloc_share(struct sm_priv_data_t *private, ++ struct vmcs_sm_ioctl_alloc_share *ioparam) + { + struct sm_resource_t *resource, *shared_resource; + int ret = 0; +@@ -2200,9 +2200,9 @@ error: + } + + /* Import a contiguous block of memory to be shared with VC. */ +-int vc_sm_ioctl_import_dmabuf(struct sm_priv_data_t *private, +- struct vmcs_sm_ioctl_import_dmabuf *ioparam, +- struct dma_buf *src_dma_buf) ++static int vc_sm_ioctl_import_dmabuf(struct sm_priv_data_t *private, ++ struct vmcs_sm_ioctl_import_dmabuf *ioparam, ++ struct dma_buf *src_dma_buf) + { + int ret = 0; + int status; diff --git a/target/linux/brcm2708/patches-4.19/950-0336-staging-bcm2835-codec-NULL-component-handle-on-queue.patch b/target/linux/brcm2708/patches-4.19/950-0336-staging-bcm2835-codec-NULL-component-handle-on-queue.patch new file mode 100644 index 0000000000..ee5d01d3aa --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0336-staging-bcm2835-codec-NULL-component-handle-on-queue.patch @@ -0,0 +1,59 @@ +From 140c118a9886b0386d748e6aa7cbd8ba9f9b0ede Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 19 Mar 2019 17:55:09 +0000 +Subject: [PATCH] staging: bcm2835-codec: NULL component handle on + queue_setup failure + +queue_setup tries creating the relevant MMAL component and configures +the input and output ports as we're expecting to start streaming. +If the port configuration failed then it destroyed the component, +but failed to clear the component handle, therefore release tried +destroying the component again. +Adds some logging should the port config fail as well. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 15 +++++++++++++-- + 1 file changed, 13 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -1776,13 +1776,21 @@ static int bcm2835_codec_create_componen + + ret = vchiq_mmal_port_set_format(dev->instance, + &ctx->component->input[0]); +- if (ret < 0) ++ if (ret < 0) { ++ v4l2_dbg(1, debug, &dev->v4l2_dev, ++ "%s: vchiq_mmal_port_set_format ip port failed\n", ++ __func__); + goto destroy_component; ++ } + + ret = vchiq_mmal_port_set_format(dev->instance, + &ctx->component->output[0]); +- if (ret < 0) ++ if (ret < 0) { ++ v4l2_dbg(1, debug, &dev->v4l2_dev, ++ "%s: vchiq_mmal_port_set_format op port failed\n", ++ __func__); + goto destroy_component; ++ } + + if (dev->role == ENCODE) { + u32 param = 1; +@@ -1812,11 +1820,14 @@ static int bcm2835_codec_create_componen + ctx->q_data[V4L2_M2M_DST].sizeimage, + ctx->component->output[0].minimum_buffer.size); + } ++ v4l2_dbg(2, debug, &dev->v4l2_dev, "%s: component created as %s\n", ++ __func__, components[dev->role]); + + return 0; + + destroy_component: + vchiq_mmal_component_finalise(ctx->dev->instance, ctx->component); ++ ctx->component = NULL; + + return ret; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0336-usb-dwc_otg-Clean-up-build-warnings-on-64bit-kernels.patch b/target/linux/brcm2708/patches-4.19/950-0336-usb-dwc_otg-Clean-up-build-warnings-on-64bit-kernels.patch deleted file mode 100644 index 4e30ab8881..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0336-usb-dwc_otg-Clean-up-build-warnings-on-64bit-kernels.patch +++ /dev/null @@ -1,110 +0,0 @@ -From d2536830d8f1ef06afdc84c5ac6e1a70b3a2bc40 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 25 Jan 2019 16:03:31 +0000 -Subject: [PATCH 336/806] usb: dwc_otg: Clean up build warnings on 64bit - kernels - -No functional changes. Almost all are changes to logging lines. - -Signed-off-by: Dave Stevenson ---- - drivers/usb/host/dwc_otg/dwc_otg_driver.c | 3 +-- - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 2 +- - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 19 ++++++++++++++----- - drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 10 ++++------ - 4 files changed, 20 insertions(+), 14 deletions(-) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c -@@ -837,8 +837,7 @@ static int dwc_otg_driver_probe( - retval = -ENOMEM; - goto fail; - } -- dev_info(&_dev->dev, "base=0x%08x\n", -- (unsigned)dwc_otg_device->os_dep.base); -+ dev_info(&_dev->dev, "base=%p\n", dwc_otg_device->os_dep.base); - #endif - - /* ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -@@ -301,7 +301,7 @@ static int notrace fiq_iso_out_advance(s - last = 1; - - /* New DMA address - address of bounce buffer referred to in index */ -- hcdma.d32 = (uint32_t) &blob->channel[n].index[i].buf[0]; -+ hcdma.d32 = (dma_addr_t) blob->channel[n].index[i].buf; - //hcdma.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HC_DMA); - //hcdma.d32 += st->channel[n].dma_info.slot_len[i]; - fiq_print(FIQDBG_INT, st, "LAST: %01d ", last); ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -1041,8 +1041,8 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd - * moderately readable array casts. - */ - hcd->fiq_dmab = DWC_DMA_ALLOC(dev, (sizeof(struct fiq_dma_channel) * num_channels), &hcd->fiq_state->dma_base); -- DWC_WARN("FIQ DMA bounce buffers: virt = 0x%08x dma = 0x%08x len=%d", -- (unsigned int)hcd->fiq_dmab, (unsigned int)hcd->fiq_state->dma_base, -+ DWC_WARN("FIQ DMA bounce buffers: virt = %px dma = %pad len=%zu", -+ hcd->fiq_dmab, &hcd->fiq_state->dma_base, - sizeof(struct fiq_dma_channel) * num_channels); - - DWC_MEMSET(hcd->fiq_dmab, 0x6b, 9024); -@@ -1522,9 +1522,12 @@ int fiq_fsm_setup_periodic_dma(dwc_otg_h - /* - * Set dma_regs to bounce buffer. FIQ will update the - * state depending on transaction progress. -+ * Pointer arithmetic on hcd->fiq_state->dma_base (a dma_addr_t) -+ * to point it to the correct offset in the allocated buffers. - */ - blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; -- st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; -+ st->hcdma_copy.d32 = (dma_addr_t) blob->channel[hc->hc_num].index[0].buf; -+ - /* Calculate the max number of CSPLITS such that the FIQ can time out - * a transaction if it fails. - */ -@@ -1571,9 +1574,15 @@ int fiq_fsm_setup_periodic_dma(dwc_otg_h - st->nrpackets = i; - } - ptr = qtd->urb->buf + frame_desc->offset; -- /* Point the HC at the DMA address of the bounce buffers */ -+ /* -+ * Point the HC at the DMA address of the bounce buffers -+ * -+ * Pointer arithmetic on hcd->fiq_state->dma_base (a -+ * dma_addr_t) to point it to the correct offset in the -+ * allocated buffers. -+ */ - blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; -- st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; -+ st->hcdma_copy.d32 = (dma_addr_t) blob->channel[hc->hc_num].index[0].buf; - - /* fixup xfersize to the actual packet size */ - st->hctsiz_copy.b.pid = 0; ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -@@ -454,11 +454,9 @@ static void hcd_init_fiq(void *cookie) - DWC_ERROR("Can't claim FIQ"); - BUG(); - } -- DWC_WARN("FIQ on core %d at 0x%08x", -- smp_processor_id(), -- (fiq_fsm_enable ? (int)&dwc_otg_fiq_fsm : (int)&dwc_otg_fiq_nop)); -- DWC_WARN("FIQ ASM at 0x%08x length %d", (int)&_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub)); -- set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub); -+ DWC_WARN("FIQ on core %d", smp_processor_id()); -+ DWC_WARN("FIQ ASM at %px length %d", &_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub)); -+ set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub); - memset(®s,0,sizeof(regs)); - - regs.ARM_r8 = (long) dwc_otg_hcd->fiq_state; -@@ -483,7 +481,7 @@ static void hcd_init_fiq(void *cookie) - dwc_otg_hcd->fiq_state->mphi_regs.outddb = otg_dev->os_dep.mphi_base + 0x2c; - dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50; - dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base; -- DWC_WARN("MPHI regs_base at 0x%08x", (int)dwc_otg_hcd->fiq_state->mphi_regs.base); -+ DWC_WARN("MPHI regs_base at %px", dwc_otg_hcd->fiq_state->mphi_regs.base); - //Enable mphi peripheral - writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); - #ifdef DEBUG diff --git a/target/linux/brcm2708/patches-4.19/950-0337-staging-vc-sm-cma-Remove-the-debugfs-directory-on-re.patch b/target/linux/brcm2708/patches-4.19/950-0337-staging-vc-sm-cma-Remove-the-debugfs-directory-on-re.patch new file mode 100644 index 0000000000..aeea6c88ae --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0337-staging-vc-sm-cma-Remove-the-debugfs-directory-on-re.patch @@ -0,0 +1,24 @@ +From 4857371a7cc5d371b1e4221fa38848716a779eb1 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 8 Mar 2019 10:49:17 +0000 +Subject: [PATCH] staging: vc-sm-cma: Remove the debugfs directory on + remove + +Without removing that, reloading the driver fails. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -757,7 +757,7 @@ static int bcm2835_vc_sm_cma_remove(stru + pr_debug("[%s]: start\n", __func__); + if (sm_inited) { + /* Remove all proc entries. */ +- //debugfs_remove_recursive(sm_state->dir_root); ++ debugfs_remove_recursive(sm_state->dir_root); + + /* Stop the videocore shared memory service. */ + vc_sm_cma_vchi_stop(&sm_state->sm_handle); diff --git a/target/linux/brcm2708/patches-4.19/950-0337-usb-dwc_otg-Use-dma-allocation-for-mphi-dummy_send-b.patch b/target/linux/brcm2708/patches-4.19/950-0337-usb-dwc_otg-Use-dma-allocation-for-mphi-dummy_send-b.patch deleted file mode 100644 index 49fb4d7dde..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0337-usb-dwc_otg-Use-dma-allocation-for-mphi-dummy_send-b.patch +++ /dev/null @@ -1,74 +0,0 @@ -From f0d93c5098283f88ea1de3af152a190177da8f36 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 30 Jan 2019 17:47:51 +0000 -Subject: [PATCH 337/806] usb: dwc_otg: Use dma allocation for mphi dummy_send - buffer - -The FIQ driver used a kzalloc'ed buffer for dummy_send, -passing a kernel virtual address to the hardware block. -The buffer is only ever used for a dummy read, so it -should be harmless, but there is the chance that it will -cause exceptions. - -Use a dma allocation so that we have a genuine bus address, -and read from that. -Free the allocation when done for good measure. - -Signed-off-by: Dave Stevenson ---- - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 4 ++-- - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 1 + - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 5 ++++- - 3 files changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -@@ -1347,7 +1347,7 @@ void notrace dwc_otg_fiq_fsm(struct fiq_ - /* We got an interrupt, didn't handle it. */ - if (kick_irq) { - state->mphi_int_count++; -- FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); -+ FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); - FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); - - } -@@ -1408,7 +1408,7 @@ void notrace dwc_otg_fiq_nop(struct fiq_ - FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); - /* Force a clear before another dummy send */ - FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); -- FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); -+ FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); - FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); - - } ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -@@ -352,6 +352,7 @@ struct fiq_state { - dma_addr_t dma_base; - struct fiq_dma_blob *fiq_dmab; - void *dummy_send; -+ dma_addr_t dummy_send_dma; - gintmsk_data_t gintmsk_saved; - haintmsk_data_t haintmsk_saved; - int mphi_int_count; ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -929,6 +929,8 @@ static void dwc_otg_hcd_free(dwc_otg_hcd - DWC_TIMER_FREE(dwc_otg_hcd->conn_timer); - DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet); - DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet); -+ DWC_DMA_FREE(dev, 16, dwc_otg_hcd->fiq_state->dummy_send, -+ dwc_otg_hcd->fiq_state->dummy_send_dma); - DWC_FREE(dwc_otg_hcd->fiq_state); - - #ifdef DWC_DEV_SRPCAP -@@ -1021,7 +1023,8 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd - for (i = 0; i < num_channels; i++) { - hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; - } -- hcd->fiq_state->dummy_send = DWC_ALLOC_ATOMIC(16); -+ hcd->fiq_state->dummy_send = DWC_DMA_ALLOC_ATOMIC(dev, 16, -+ &hcd->fiq_state->dummy_send_dma); - - hcd->fiq_stack = DWC_ALLOC(sizeof(struct fiq_stack)); - if (!hcd->fiq_stack) { diff --git a/target/linux/brcm2708/patches-4.19/950-0338-staging-vc-sm-cma-Use-devm_-allocs-for-sm_state.patch b/target/linux/brcm2708/patches-4.19/950-0338-staging-vc-sm-cma-Use-devm_-allocs-for-sm_state.patch new file mode 100644 index 0000000000..70b73dd714 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0338-staging-vc-sm-cma-Use-devm_-allocs-for-sm_state.patch @@ -0,0 +1,69 @@ +From 6214831525192a9eb665c67fe8c93006c17acbad Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 8 Mar 2019 11:06:41 +0000 +Subject: [PATCH] staging: vc-sm-cma: Use devm_ allocs for sm_state. + +Use managed allocations for sm_state, removing reliance on +manual management. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 12 +++++------- + 1 file changed, 5 insertions(+), 7 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -656,7 +656,7 @@ static void vc_sm_connected_init(void) + __func__, ret); + + ret = -EIO; +- goto err_free_mem; ++ goto err_failed; + } + + ret = vchi_connect(NULL, 0, vchi_instance); +@@ -665,7 +665,7 @@ static void vc_sm_connected_init(void) + __func__, ret); + + ret = -EIO; +- goto err_free_mem; ++ goto err_failed; + } + + /* Initialize an instance of the shared memory service. */ +@@ -676,7 +676,7 @@ static void vc_sm_connected_init(void) + __func__); + + ret = -EPERM; +- goto err_free_mem; ++ goto err_failed; + } + + /* Create a debug fs directory entry (root). */ +@@ -722,8 +722,7 @@ err_remove_shared_memory: + debugfs_remove_recursive(sm_state->dir_root); + err_stop_sm_service: + vc_sm_cma_vchi_stop(&sm_state->sm_handle); +-err_free_mem: +- kfree(sm_state); ++err_failed: + pr_info("[%s]: failed, ret %d\n", __func__, ret); + } + +@@ -732,7 +731,7 @@ static int bcm2835_vc_sm_cma_probe(struc + { + pr_info("%s: Videocore shared memory driver\n", __func__); + +- sm_state = kzalloc(sizeof(*sm_state), GFP_KERNEL); ++ sm_state = devm_kzalloc(&pdev->dev, sizeof(*sm_state), GFP_KERNEL); + if (!sm_state) + return -ENOMEM; + sm_state->pdev = pdev; +@@ -766,7 +765,6 @@ static int bcm2835_vc_sm_cma_remove(stru + + /* Free the memory for the state structure. */ + mutex_destroy(&sm_state->map_lock); +- kfree(sm_state); + } + + pr_debug("[%s]: end\n", __func__); diff --git a/target/linux/brcm2708/patches-4.19/950-0338-staging-vchiq_arm-Set-up-dma-ranges-on-child-devices.patch b/target/linux/brcm2708/patches-4.19/950-0338-staging-vchiq_arm-Set-up-dma-ranges-on-child-devices.patch deleted file mode 100644 index 02cb74d9fa..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0338-staging-vchiq_arm-Set-up-dma-ranges-on-child-devices.patch +++ /dev/null @@ -1,47 +0,0 @@ -From f03f60a51efdf7fbc1f7d2c5b120a7de93ea6d9e Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 29 Jan 2019 16:13:25 +0000 -Subject: [PATCH 338/806] staging: vchiq_arm: Set up dma ranges on child - devices - -The VCHIQ driver now loads the audio, camera, codec, and vc-sm -drivers as platform drivers. However they were not being given -the correct DMA configuration. - -Call of_dma_configure with the parent (VCHIQ) parameters to be -inherited by the child. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 13 ++++++++++++- - 1 file changed, 12 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -3585,6 +3585,7 @@ static struct platform_device * - vchiq_register_child(struct platform_device *pdev, const char *name) - { - struct platform_device_info pdevinfo; -+ struct platform_device *new_dev; - - memset(&pdevinfo, 0, sizeof(pdevinfo)); - -@@ -3593,7 +3594,17 @@ vchiq_register_child(struct platform_dev - pdevinfo.id = PLATFORM_DEVID_NONE; - pdevinfo.dma_mask = DMA_BIT_MASK(32); - -- return platform_device_register_full(&pdevinfo); -+ new_dev = platform_device_register_full(&pdevinfo); -+ if (!new_dev) -+ return NULL; -+ -+ /* -+ * We want the dma-ranges etc to be copied from the parent VCHIQ device -+ * to be passed on to the children too. -+ */ -+ of_dma_configure(&new_dev->dev, pdev->dev.of_node, true); -+ -+ return new_dev; - } - - static int vchiq_probe(struct platform_device *pdev) diff --git a/target/linux/brcm2708/patches-4.19/950-0339-staging-vc-sm-cma-Correct-DMA-configuration.patch b/target/linux/brcm2708/patches-4.19/950-0339-staging-vc-sm-cma-Correct-DMA-configuration.patch deleted file mode 100644 index fc5ffbd30b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0339-staging-vc-sm-cma-Correct-DMA-configuration.patch +++ /dev/null @@ -1,44 +0,0 @@ -From ea000a969afa022776bdf8050aaa501b2679e028 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 29 Jan 2019 16:24:41 +0000 -Subject: [PATCH 339/806] staging: vc-sm-cma: Correct DMA configuration. - -Now that VCHIQ is setting up the DMA configuration as our -parent device, don't try to configure it during probe. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 15 +++++---------- - 1 file changed, 5 insertions(+), 10 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -703,9 +703,6 @@ err_free_mem: - /* Driver loading. */ - static int bcm2835_vc_sm_cma_probe(struct platform_device *pdev) - { -- struct device *dev = &pdev->dev; -- int err; -- - pr_info("%s: Videocore shared memory driver\n", __func__); - - sm_state = kzalloc(sizeof(*sm_state), GFP_KERNEL); -@@ -714,13 +711,11 @@ static int bcm2835_vc_sm_cma_probe(struc - sm_state->pdev = pdev; - mutex_init(&sm_state->map_lock); - -- dev->coherent_dma_mask = DMA_BIT_MASK(32); -- dev->dma_mask = &dev->coherent_dma_mask; -- err = of_dma_configure(dev, NULL, true); -- if (err) { -- dev_err(dev, "Unable to setup DMA: %d\n", err); -- return err; -- } -+ pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, -+ sizeof(*pdev->dev.dma_parms), -+ GFP_KERNEL); -+ /* dma_set_max_seg_size checks if dma_parms is NULL. */ -+ dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF); - - vchiq_add_connected_callback(vc_sm_connected_init); - return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0339-staging-vc-sm-cma-Don-t-fail-if-debugfs-calls-fail.patch b/target/linux/brcm2708/patches-4.19/950-0339-staging-vc-sm-cma-Don-t-fail-if-debugfs-calls-fail.patch new file mode 100644 index 0000000000..f8b7ca28ad --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0339-staging-vc-sm-cma-Don-t-fail-if-debugfs-calls-fail.patch @@ -0,0 +1,37 @@ +From 13572df6bba85d8fc91a212faa89b5b6147bdf94 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 8 Mar 2019 11:09:49 +0000 +Subject: [PATCH] staging: vc-sm-cma: Don't fail if debugfs calls fail. + +Return codes from debugfs calls should never alter the +flow of the main code. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 8 -------- + 1 file changed, 8 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -681,13 +681,6 @@ static void vc_sm_connected_init(void) + + /* Create a debug fs directory entry (root). */ + sm_state->dir_root = debugfs_create_dir(VC_SM_DIR_ROOT_NAME, NULL); +- if (!sm_state->dir_root) { +- pr_err("[%s]: failed to create \'%s\' directory entry\n", +- __func__, VC_SM_DIR_ROOT_NAME); +- +- ret = -EPERM; +- goto err_stop_sm_service; +- } + + sm_state->dir_state.show = &vc_sm_cma_global_state_show; + sm_state->dir_state.dir_entry = +@@ -720,7 +713,6 @@ static void vc_sm_connected_init(void) + + err_remove_shared_memory: + debugfs_remove_recursive(sm_state->dir_root); +-err_stop_sm_service: + vc_sm_cma_vchi_stop(&sm_state->sm_handle); + err_failed: + pr_info("[%s]: failed, ret %d\n", __func__, ret); diff --git a/target/linux/brcm2708/patches-4.19/950-0340-staging-vc-sm-cma-Ensure-mutex-and-idr-are-destroyed.patch b/target/linux/brcm2708/patches-4.19/950-0340-staging-vc-sm-cma-Ensure-mutex-and-idr-are-destroyed.patch new file mode 100644 index 0000000000..6133840b71 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0340-staging-vc-sm-cma-Ensure-mutex-and-idr-are-destroyed.patch @@ -0,0 +1,27 @@ +From 4027b08d96c68919f51c768a23877283ef5aefb9 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 8 Mar 2019 11:11:46 +0000 +Subject: [PATCH] staging: vc-sm-cma: Ensure mutex and idr are + destroyed + +map_lock and kernelid_map are created in probe, but not released +in release should the vcsm service not connect (eg running the +cutdown firmware). + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -752,7 +752,9 @@ static int bcm2835_vc_sm_cma_remove(stru + + /* Stop the videocore shared memory service. */ + vc_sm_cma_vchi_stop(&sm_state->sm_handle); ++ } + ++ if (sm_state) { + idr_destroy(&sm_state->kernelid_map); + + /* Free the memory for the state structure. */ diff --git a/target/linux/brcm2708/patches-4.19/950-0340-staging-vc-sm-cma-Use-a-void-pointer-as-the-handle-w.patch b/target/linux/brcm2708/patches-4.19/950-0340-staging-vc-sm-cma-Use-a-void-pointer-as-the-handle-w.patch deleted file mode 100644 index 13aba4f303..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0340-staging-vc-sm-cma-Use-a-void-pointer-as-the-handle-w.patch +++ /dev/null @@ -1,111 +0,0 @@ -From df84621e5bd5cc206d1039ce0880ccd0b325525b Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 29 Jan 2019 16:29:00 +0000 -Subject: [PATCH 340/806] staging: vc-sm-cma: Use a void* pointer as the handle - within the kernel - -The driver was using an unsigned int as the handle to the outside world, -and doing a nasty cast to the struct dmabuf when handed it back. -This breaks badly with a 64 bit kernel where the pointer doesn't fit -in an unsigned int. - -Switch to using a void* within the kernel. Reality is that it is -a struct dma_buf*, but advertising it as such to other drivers seems -to encourage the use of it as such, and I'm not sure on the implications -of that. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 10 +++++----- - drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h | 6 +++--- - drivers/staging/vc04_services/vchiq-mmal/mmal-common.h | 2 +- - drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 2 +- - 4 files changed, 10 insertions(+), 10 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -745,7 +745,7 @@ static int bcm2835_vc_sm_cma_remove(stru - } - - /* Get an internal resource handle mapped from the external one. */ --int vc_sm_cma_int_handle(int handle) -+int vc_sm_cma_int_handle(void *handle) - { - struct dma_buf *dma_buf = (struct dma_buf *)handle; - struct vc_sm_buffer *res; -@@ -762,7 +762,7 @@ int vc_sm_cma_int_handle(int handle) - EXPORT_SYMBOL_GPL(vc_sm_cma_int_handle); - - /* Free a previously allocated shared memory handle and block. */ --int vc_sm_cma_free(int handle) -+int vc_sm_cma_free(void *handle) - { - struct dma_buf *dma_buf = (struct dma_buf *)handle; - -@@ -772,7 +772,7 @@ int vc_sm_cma_free(int handle) - return -EPERM; - } - -- pr_debug("%s: handle %08x/dmabuf %p\n", __func__, handle, dma_buf); -+ pr_debug("%s: handle %p/dmabuf %p\n", __func__, handle, dma_buf); - - dma_buf_put(dma_buf); - -@@ -781,7 +781,7 @@ int vc_sm_cma_free(int handle) - EXPORT_SYMBOL_GPL(vc_sm_cma_free); - - /* Import a dmabuf to be shared with VC. */ --int vc_sm_cma_import_dmabuf(struct dma_buf *src_dmabuf, int *handle) -+int vc_sm_cma_import_dmabuf(struct dma_buf *src_dmabuf, void **handle) - { - struct dma_buf *new_dma_buf; - struct vc_sm_buffer *res; -@@ -801,7 +801,7 @@ int vc_sm_cma_import_dmabuf(struct dma_b - res = (struct vc_sm_buffer *)new_dma_buf->priv; - - /* Assign valid handle at this time.*/ -- *handle = (int)new_dma_buf; -+ *handle = new_dma_buf; - } else { - /* - * succeeded in importing the dma_buf, but then ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_knl.h -@@ -17,12 +17,12 @@ - #endif - - /* Free a previously allocated or imported shared memory handle and block. */ --int vc_sm_cma_free(int handle); -+int vc_sm_cma_free(void *handle); - - /* Get an internal resource handle mapped from the external one. */ --int vc_sm_cma_int_handle(int handle); -+int vc_sm_cma_int_handle(void *handle); - - /* Import a block of memory into the GPU space. */ --int vc_sm_cma_import_dmabuf(struct dma_buf *dmabuf, int *handle); -+int vc_sm_cma_import_dmabuf(struct dma_buf *dmabuf, void **handle); - - #endif /* __VC_SM_KNL_H__INCLUDED__ */ ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-common.h -@@ -52,7 +52,7 @@ struct mmal_buffer { - struct mmal_msg_context *msg_context; - - struct dma_buf *dma_buf;/* Exported dmabuf fd from videobuf2 */ -- int vcsm_handle; /* VCSM handle having imported the dmabuf */ -+ void *vcsm_handle; /* VCSM handle having imported the dmabuf */ - u32 vc_handle; /* VC handle to that dmabuf */ - - u32 cmd; /* MMAL command. 0=data. */ ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -1794,7 +1794,7 @@ int mmal_vchi_buffer_cleanup(struct mmal - if (buf->vcsm_handle) { - int ret; - -- pr_debug("%s: vc_sm_cma_free on handle %08X\n", __func__, -+ pr_debug("%s: vc_sm_cma_free on handle %p\n", __func__, - buf->vcsm_handle); - ret = vc_sm_cma_free(buf->vcsm_handle); - if (ret) diff --git a/target/linux/brcm2708/patches-4.19/950-0341-staging-bcm2835_codec-Clean-up-logging-on-unloading-.patch b/target/linux/brcm2708/patches-4.19/950-0341-staging-bcm2835_codec-Clean-up-logging-on-unloading-.patch new file mode 100644 index 0000000000..4bf0c78222 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0341-staging-bcm2835_codec-Clean-up-logging-on-unloading-.patch @@ -0,0 +1,49 @@ +From c42ae04bb6ed5be61d3b3e2e2c6004ae252ee34a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 8 Mar 2019 11:26:00 +0000 +Subject: [PATCH] staging: bcm2835_codec: Clean up logging on unloading + the driver + +The log line was missing a closing \n, so wasn't added to the +log immediately. +Adds the function of the V4L2 device that is being unregistered +too. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -77,6 +77,12 @@ enum bcm2835_codec_role { + ISP, + }; + ++const static char *roles[] = { ++ "decode", ++ "encode", ++ "isp" ++}; ++ + static const char * const components[] = { + "ril.video_decode", + "ril.video_encode", +@@ -2522,7 +2528,6 @@ static int bcm2835_codec_create(struct p + struct video_device *vfd; + int video_nr; + int ret; +- const static char *roles[] = {"decode", "encode", "isp"}; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) +@@ -2615,7 +2620,8 @@ static int bcm2835_codec_destroy(struct + if (!dev) + return -ENODEV; + +- v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME); ++ v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME ", %s\n", ++ roles[dev->role]); + v4l2_m2m_release(dev->m2m_dev); + video_unregister_device(&dev->vfd); + v4l2_device_unregister(&dev->v4l2_dev); diff --git a/target/linux/brcm2708/patches-4.19/950-0341-staging-vc-sm-cma-Fix-up-for-64bit-builds.patch b/target/linux/brcm2708/patches-4.19/950-0341-staging-vc-sm-cma-Fix-up-for-64bit-builds.patch deleted file mode 100644 index 7907a7ad5f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0341-staging-vc-sm-cma-Fix-up-for-64bit-builds.patch +++ /dev/null @@ -1,199 +0,0 @@ -From 696aa66a971b20e4f00431cb53747f0e4b92bb03 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 29 Jan 2019 16:32:57 +0000 -Subject: [PATCH 341/806] staging: vc-sm-cma: Fix up for 64bit builds - -There were a number of logging lines that were using -inappropriate formatting under 64bit kernels. - -The kernel_id field passed to/from the VPU was being -abused for storing the struct vc_sm_buffer *. -This breaks with 64bit kernels, so change to using an IDR. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/vc-sm-cma/vc_sm.c | 60 +++++++++++++++---- - .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 3 +- - 2 files changed, 48 insertions(+), 15 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -75,6 +75,9 @@ struct sm_state_t { - struct miscdevice dev; - struct sm_instance *sm_handle; /* Handle for videocore service. */ - -+ spinlock_t kernelid_map_lock; /* Spinlock protecting kernelid_map */ -+ struct idr kernelid_map; -+ - struct mutex map_lock; /* Global map lock. */ - struct list_head buffer_list; /* List of buffer. */ - -@@ -97,6 +100,29 @@ static int sm_inited; - - /* ---- Private Functions ------------------------------------------------ */ - -+static int get_kernel_id(struct vc_sm_buffer *buffer) -+{ -+ int handle; -+ -+ spin_lock(&sm_state->kernelid_map_lock); -+ handle = idr_alloc(&sm_state->kernelid_map, buffer, 0, 0, GFP_KERNEL); -+ spin_unlock(&sm_state->kernelid_map_lock); -+ -+ return handle; -+} -+ -+static struct vc_sm_buffer *lookup_kernel_id(int handle) -+{ -+ return idr_find(&sm_state->kernelid_map, handle); -+} -+ -+static void free_kernel_id(int handle) -+{ -+ spin_lock(&sm_state->kernelid_map_lock); -+ idr_remove(&sm_state->kernelid_map, handle); -+ spin_unlock(&sm_state->kernelid_map_lock); -+} -+ - static int vc_sm_cma_seq_file_show(struct seq_file *s, void *v) - { - struct sm_pde_t *sm_pde; -@@ -129,8 +155,7 @@ static int vc_sm_cma_global_state_show(s - if (!sm_state) - return 0; - -- seq_printf(s, "\nVC-ServiceHandle 0x%x\n", -- (unsigned int)sm_state->sm_handle); -+ seq_printf(s, "\nVC-ServiceHandle %p\n", sm_state->sm_handle); - - /* Log all applicable mapping(s). */ - -@@ -145,7 +170,7 @@ static int vc_sm_cma_global_state_show(s - resource); - seq_printf(s, " NAME %s\n", - resource->name); -- seq_printf(s, " SIZE %d\n", -+ seq_printf(s, " SIZE %zu\n", - resource->size); - seq_printf(s, " DMABUF %p\n", - resource->dma_buf); -@@ -181,7 +206,7 @@ static void vc_sm_add_resource(struct vc - list_add(&buffer->global_buffer_list, &sm_state->buffer_list); - mutex_unlock(&sm_state->map_lock); - -- pr_debug("[%s]: added buffer %p (name %s, size %d)\n", -+ pr_debug("[%s]: added buffer %p (name %s, size %zu)\n", - __func__, buffer, buffer->name, buffer->size); - } - -@@ -194,7 +219,7 @@ static void vc_sm_release_resource(struc - mutex_lock(&sm_state->map_lock); - mutex_lock(&buffer->lock); - -- pr_debug("[%s]: buffer %p (name %s, size %d)\n", -+ pr_debug("[%s]: buffer %p (name %s, size %zu)\n", - __func__, buffer, buffer->name, buffer->size); - - if (buffer->vc_handle && buffer->vpu_state == VPU_MAPPED) { -@@ -443,6 +468,7 @@ vc_sm_cma_import_dmabuf_internal(struct - struct vc_sm_import_result result = { }; - struct dma_buf_attachment *attach = NULL; - struct sg_table *sgt = NULL; -+ dma_addr_t dma_addr; - int ret = 0; - int status; - -@@ -478,21 +504,22 @@ vc_sm_cma_import_dmabuf_internal(struct - } - - import.type = VC_SM_ALLOC_NON_CACHED; -- import.addr = (uint32_t)sg_dma_address(sgt->sgl); -+ dma_addr = sg_dma_address(sgt->sgl); -+ import.addr = (uint32_t)dma_addr; - if ((import.addr & 0xC0000000) != 0xC0000000) { -- pr_err("%s: Expecting an uncached alias for dma_addr %08x\n", -- __func__, import.addr); -+ pr_err("%s: Expecting an uncached alias for dma_addr %pad\n", -+ __func__, &dma_addr); - import.addr |= 0xC0000000; - } - import.size = sg_dma_len(sgt->sgl); - import.allocator = current->tgid; -- import.kernel_id = (uint32_t)buffer; //FIXME: 64 bit support needed. -+ import.kernel_id = get_kernel_id(buffer); - - memcpy(import.name, VC_SM_RESOURCE_NAME_DEFAULT, - sizeof(VC_SM_RESOURCE_NAME_DEFAULT)); - -- pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %p, size %u\n", -- __func__, import.name, import.type, (void *)import.addr, -+ pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %pad, size %u\n", -+ __func__, import.name, import.type, &dma_addr, - import.size); - - /* Allocate the videocore buffer. */ -@@ -527,7 +554,7 @@ vc_sm_cma_import_dmabuf_internal(struct - - buffer->attach = attach; - buffer->sgt = sgt; -- buffer->dma_addr = sg_dma_address(sgt->sgl); -+ buffer->dma_addr = dma_addr; - buffer->in_use = 1; - - /* -@@ -559,6 +586,7 @@ error: - vc_sm_cma_vchi_free(sm_state->sm_handle, &free, - &sm_state->int_trans_id); - } -+ free_kernel_id(import.kernel_id); - kfree(buffer); - if (sgt) - dma_buf_unmap_attachment(attach, sgt, DMA_BIDIRECTIONAL); -@@ -586,7 +614,7 @@ vc_sm_vpu_event(struct sm_instance *inst - { - struct vc_sm_released *release = (struct vc_sm_released *)reply; - struct vc_sm_buffer *buffer = -- (struct vc_sm_buffer *)release->kernel_id; -+ lookup_kernel_id(release->kernel_id); - - /* - * FIXME: Need to check buffer is still valid and allocated -@@ -599,6 +627,7 @@ vc_sm_vpu_event(struct sm_instance *inst - buffer->vc_handle = 0; - buffer->vpu_state = VPU_NOT_MAPPED; - mutex_unlock(&buffer->lock); -+ free_kernel_id(release->kernel_id); - - vc_sm_release_resource(buffer, 0); - } -@@ -711,6 +740,9 @@ static int bcm2835_vc_sm_cma_probe(struc - sm_state->pdev = pdev; - mutex_init(&sm_state->map_lock); - -+ spin_lock_init(&sm_state->kernelid_map_lock); -+ idr_init_base(&sm_state->kernelid_map, 1); -+ - pdev->dev.dma_parms = devm_kzalloc(&pdev->dev, - sizeof(*pdev->dev.dma_parms), - GFP_KERNEL); -@@ -735,6 +767,8 @@ static int bcm2835_vc_sm_cma_remove(stru - /* Stop the videocore shared memory service. */ - vc_sm_cma_vchi_stop(&sm_state->sm_handle); - -+ idr_destroy(&sm_state->kernelid_map); -+ - /* Free the memory for the state structure. */ - mutex_destroy(&sm_state->map_lock); - kfree(sm_state); ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c -@@ -356,8 +356,7 @@ struct sm_instance *vc_sm_cma_vchi_init( - set_user_nice(instance->io_thread, -10); - wake_up_process(instance->io_thread); - -- pr_debug("%s: success - instance 0x%x", __func__, -- (unsigned int)instance); -+ pr_debug("%s: success - instance %p", __func__, instance); - return instance; - - err_close_services: diff --git a/target/linux/brcm2708/patches-4.19/950-0342-bcm2835-sdhost-Allow-for-sg-entries-that-cross-pages.patch b/target/linux/brcm2708/patches-4.19/950-0342-bcm2835-sdhost-Allow-for-sg-entries-that-cross-pages.patch new file mode 100644 index 0000000000..e16e12da3c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0342-bcm2835-sdhost-Allow-for-sg-entries-that-cross-pages.patch @@ -0,0 +1,32 @@ +From 44db7882be675cdf2d89741af5bbeba41b3e25af Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 13 Mar 2019 14:19:11 +0000 +Subject: [PATCH] bcm2835-sdhost: Allow for sg entries that cross pages + +The dma_complete handling code calculates a virtual address for a page +then adds an offset, but if the offset is more than a page and HIGHMEM +is in use then the summed address could be in an unmapped (or just +incorrect) page. + +The upstream SDHOST driver allows for this possibility - copy the code +that does so. + +Signed-off-by: Phil Elwell +--- + drivers/mmc/host/bcm2835-sdhost.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/mmc/host/bcm2835-sdhost.c ++++ b/drivers/mmc/host/bcm2835-sdhost.c +@@ -543,6 +543,11 @@ static void bcm2835_sdhost_dma_complete( + void *page; + u32 *buf; + ++ if (host->drain_offset & PAGE_MASK) { ++ host->drain_page += host->drain_offset >> PAGE_SHIFT; ++ host->drain_offset &= ~PAGE_MASK; ++ } ++ + page = kmap_atomic(host->drain_page); + buf = page + host->drain_offset; + diff --git a/target/linux/brcm2708/patches-4.19/950-0343-overlays-sdio-Added-4-bit-support-on-GPIOs-34-39.-29.patch b/target/linux/brcm2708/patches-4.19/950-0343-overlays-sdio-Added-4-bit-support-on-GPIOs-34-39.-29.patch new file mode 100644 index 0000000000..f823f670e4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0343-overlays-sdio-Added-4-bit-support-on-GPIOs-34-39.-29.patch @@ -0,0 +1,47 @@ +From 7c23c772289fa31960b9e6969499aa93c92d842b Mon Sep 17 00:00:00 2001 +From: Adrien RICCIARDI +Date: Fri, 22 Mar 2019 11:35:30 +0100 +Subject: [PATCH] overlays: sdio: Added 4-bit support on GPIOs 34-39. + (#2903) + +--- + arch/arm/boot/dts/overlays/README | 3 +++ + arch/arm/boot/dts/overlays/sdio-overlay.dts | 9 +++++++++ + 2 files changed, 12 insertions(+) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1785,6 +1785,9 @@ Params: sdio_overclock SDIO Clo + gpios_34_37 Select GPIOs 34-37 for 1-bit mode. Must be used + with bus_width=1. + ++ gpios_34_39 Select GPIOs 34-39 for 4-bit mode. Must be used ++ with bus_width=4 (the default). ++ + + Name: sdio-1bit + Info: This overlay is now deprecated. Use +--- a/arch/arm/boot/dts/overlays/sdio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts +@@ -64,6 +64,14 @@ + }; + }; + ++ fragment@5 { ++ target = <&sdio_ovl_pins>; ++ __dormant__ { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ }; ++ + fragment@6 { + target-path = "/aliases"; + __overlay__ { +@@ -77,5 +85,6 @@ + sdio_overclock = <&sdio_ovl>,"brcm,overclock-50:0"; + gpios_22_25 = <0>,"=3"; + gpios_34_37 = <0>,"=4"; ++ gpios_34_39 = <0>,"=5"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0344-overlays-Fix-multiple-instantiation-of-sc16is7xx.patch b/target/linux/brcm2708/patches-4.19/950-0344-overlays-Fix-multiple-instantiation-of-sc16is7xx.patch new file mode 100644 index 0000000000..86fd110342 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0344-overlays-Fix-multiple-instantiation-of-sc16is7xx.patch @@ -0,0 +1,57 @@ +From 649efe5db3900ed3bbfd3c3daa3b96d8fc0b9d68 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 22 Mar 2019 16:44:47 +0000 +Subject: [PATCH] overlays: Fix multiple-instantiation of sc16is7xx* + +The registration of the fixed clocks uses the node name as the clock +name, causing a clash if two clock nodes have the same name, regardless +of the path to the node. Fix the issue by overwriting the clock node +names using the value of the "addr" parameter, providing a crude +disambiguation. (A bit of string pasting to form "sc16is752_clk_" +would have been nice, but that is outside the abilities of the overlay +parameter mechanism.) + +Also give the sc16is750-i2c overlay the xtal parameter for symmetry. + +See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=235650 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 1 + + arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts | 3 ++- + arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts | 2 +- + 3 files changed, 4 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1725,6 +1725,7 @@ Info: Overlay for the NXP SC16IS750 UA + Load: dtoverlay=sc16is750-i2c,= + Params: int_pin GPIO used for IRQ (default 24) + addr Address (default 0x48) ++ xtal On-board crystal frequency (default 14745600) + + + Name: sc16is752-i2c +--- a/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts +@@ -31,7 +31,8 @@ + + __overrides__ { + int_pin = <&sc16is750>,"interrupts:0"; +- addr = <&sc16is750>,"reg:0"; ++ addr = <&sc16is750>,"reg:0",<&sc16is750_clk>,"name"; ++ xtal = <&sc16is750>,"clock-frequency:0"; + }; + + }; +--- a/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts +@@ -34,7 +34,7 @@ + + __overrides__ { + int_pin = <&sc16is752>,"interrupts:0"; +- addr = <&sc16is752>,"reg:0"; ++ addr = <&sc16is752>,"reg:0",<&sc16is752_clk>,"name"; + xtal = <&sc16is752>,"clock-frequency:0"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0345-bcm2835-mmc-Fix-DMA-channel-leak.patch b/target/linux/brcm2708/patches-4.19/950-0345-bcm2835-mmc-Fix-DMA-channel-leak.patch new file mode 100644 index 0000000000..1122e3c3e2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0345-bcm2835-mmc-Fix-DMA-channel-leak.patch @@ -0,0 +1,42 @@ +From 7458efc95816cc9d716d94a4894172c2a9d9fba7 Mon Sep 17 00:00:00 2001 +From: Lukas Wunner +Date: Wed, 16 Jan 2019 12:22:32 +0100 +Subject: [PATCH] bcm2835-mmc: Fix DMA channel leak + +The BCM2835 MMC host driver requests a DMA channel on probe but neglects +to release the channel in the probe error path and on driver unbind. + +I'm seeing this happen on every boot of the Compute Module 3: On first +driver probe, DMA channel 2 is allocated and then leaked with a "could +not get clk, deferring probe" message. On second driver probe, channel 4 +is allocated. + +Fix it. + +Signed-off-by: Lukas Wunner +Cc: Frank Pavlic +--- + drivers/mmc/host/bcm2835-mmc.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/mmc/host/bcm2835-mmc.c ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -1503,6 +1503,8 @@ static int bcm2835_mmc_probe(struct plat + + return 0; + err: ++ if (host->dma_chan_rxtx) ++ dma_release_channel(host->dma_chan_rxtx); + mmc_free_host(mmc); + + return ret; +@@ -1548,6 +1550,9 @@ static int bcm2835_mmc_remove(struct pla + + tasklet_kill(&host->finish_tasklet); + ++ if (host->dma_chan_rxtx) ++ dma_release_channel(host->dma_chan_rxtx); ++ + mmc_free_host(host->mmc); + platform_set_drvdata(pdev, NULL); + diff --git a/target/linux/brcm2708/patches-4.19/950-0346-bcm2835-mmc-Fix-struct-mmc_host-leak-on-probe.patch b/target/linux/brcm2708/patches-4.19/950-0346-bcm2835-mmc-Fix-struct-mmc_host-leak-on-probe.patch new file mode 100644 index 0000000000..9ec4404bef --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0346-bcm2835-mmc-Fix-struct-mmc_host-leak-on-probe.patch @@ -0,0 +1,29 @@ +From 82ced13dc5805f6e49e2182269e672b20d8394bc Mon Sep 17 00:00:00 2001 +From: Lukas Wunner +Date: Sat, 19 Jan 2019 08:06:48 +0100 +Subject: [PATCH] bcm2835-mmc: Fix struct mmc_host leak on probe + +The BCM2835 MMC host driver requests the bus address of the host's +register map on probe. If that fails, the driver leaks the struct +mmc_host allocated earlier. + +Fix it. + +Signed-off-by: Lukas Wunner +Cc: Frank Pavlic +--- + drivers/mmc/host/bcm2835-mmc.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/mmc/host/bcm2835-mmc.c ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -1439,7 +1439,8 @@ static int bcm2835_mmc_probe(struct plat + addr = of_get_address(node, 0, NULL, NULL); + if (!addr) { + dev_err(dev, "could not get DMA-register address\n"); +- return -ENODEV; ++ ret = -ENODEV; ++ goto err; + } + host->bus_addr = be32_to_cpup(addr); + pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", diff --git a/target/linux/brcm2708/patches-4.19/950-0346-configs-Enable-the-AD193x-codecs.patch b/target/linux/brcm2708/patches-4.19/950-0346-configs-Enable-the-AD193x-codecs.patch deleted file mode 100644 index c6db4c6f2a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0346-configs-Enable-the-AD193x-codecs.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 3ffbec3df726c6d36ef728d476cb3ff3fcc17c81 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 7 Feb 2019 18:16:25 +0000 -Subject: [PATCH 346/806] configs: Enable the AD193x codecs - -See: https://github.com/raspberrypi/linux/issues/2850 - -Signed-off-by: Phil Elwell ---- - sound/soc/codecs/Kconfig | 4 ++-- - 4 files changed, 8 insertions(+), 2 deletions(-) - ---- a/sound/soc/codecs/Kconfig -+++ b/sound/soc/codecs/Kconfig -@@ -295,11 +295,11 @@ config SND_SOC_AD193X - tristate - - config SND_SOC_AD193X_SPI -- tristate -+ tristate "Analog Devices AU193X CODEC - SPI" - select SND_SOC_AD193X - - config SND_SOC_AD193X_I2C -- tristate -+ tristate "Analog Devices AU193X CODEC - I2C" - select SND_SOC_AD193X - - config SND_SOC_AD1980 diff --git a/target/linux/brcm2708/patches-4.19/950-0347-bcm2835-mmc-Fix-duplicate-free_irq-on-remove.patch b/target/linux/brcm2708/patches-4.19/950-0347-bcm2835-mmc-Fix-duplicate-free_irq-on-remove.patch new file mode 100644 index 0000000000..0ca7c11822 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0347-bcm2835-mmc-Fix-duplicate-free_irq-on-remove.patch @@ -0,0 +1,38 @@ +From 4a15e086fa9531f808c15b8fb8d7ed1fdb411b74 Mon Sep 17 00:00:00 2001 +From: Lukas Wunner +Date: Sat, 19 Jan 2019 09:00:26 +0100 +Subject: [PATCH] bcm2835-mmc: Fix duplicate free_irq() on remove + +The BCM2835 MMC host driver requests its interrupt as a device-managed +resource, so the interrupt is automatically freed after the driver is +unbound. + +However on driver unbind, bcm2835_mmc_remove() frees the interrupt +explicitly to avoid invocation of the interrupt handler after driver +structures have been torn down. + +The interrupt is thus freed twice, leading to a WARN splat in +__free_irq(). Fix by not requesting the interrupt as a device-managed +resource. + +Signed-off-by: Lukas Wunner +Cc: Frank Pavlic +--- + drivers/mmc/host/bcm2835-mmc.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/mmc/host/bcm2835-mmc.c ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -1389,9 +1389,9 @@ static int bcm2835_mmc_add_host(struct b + init_waitqueue_head(&host->buf_ready_int); + + bcm2835_mmc_init(host, 0); +- ret = devm_request_threaded_irq(dev, host->irq, bcm2835_mmc_irq, +- bcm2835_mmc_thread_irq, IRQF_SHARED, +- mmc_hostname(mmc), host); ++ ret = request_threaded_irq(host->irq, bcm2835_mmc_irq, ++ bcm2835_mmc_thread_irq, IRQF_SHARED, ++ mmc_hostname(mmc), host); + if (ret) { + dev_err(dev, "Failed to request IRQ %d: %d\n", host->irq, ret); + goto untasklet; diff --git a/target/linux/brcm2708/patches-4.19/950-0347-overlays-balenaFin-v1.1.0-carrier-board-update.patch b/target/linux/brcm2708/patches-4.19/950-0347-overlays-balenaFin-v1.1.0-carrier-board-update.patch deleted file mode 100644 index e07a005d6e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0347-overlays-balenaFin-v1.1.0-carrier-board-update.patch +++ /dev/null @@ -1,109 +0,0 @@ -From 6cafe647492605d21c2418b6261bf3182b9229f2 Mon Sep 17 00:00:00 2001 -From: Zahari Petkov -Date: Fri, 8 Feb 2019 13:03:38 +0200 -Subject: [PATCH 347/806] overlays: balenaFin v1.1.0 carrier board update - -A backward compatible update for the balenaFin carrier board for the -Raspberry Pi Compute Module 3/3+ Lite. - -The updated overlay includes: - * support for the newly introduced RGB LEDs - * i2c-gpio and SDIO improvements - * DT based Marvell 88W8887 configuration - -Signed-off-by: Zahari Petkov ---- - arch/arm/boot/dts/overlays/README | 2 +- - .../boot/dts/overlays/balena-fin-overlay.dts | 46 ++++++++++++++++++- - 2 files changed, 45 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -472,7 +472,7 @@ Params: swap_lr Reverse - - Name: balena-fin - Info: Overlay that enables WiFi, Bluetooth and the GPIO expander on the -- Balena Fin board. -+ balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite. - Load: dtoverlay=balena-fin - Params: - ---- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -@@ -11,6 +11,7 @@ - pinctrl-0 = <&sdio_pins>; - bus-width = <4>; - brcm,overclock-50 = <35>; -+ non-removable; - status = "okay"; - }; - }; -@@ -34,7 +35,8 @@ - fragment@2 { - target-path = "/"; - __overlay__ { -- // We should investigate how to switch to mmc-pwrseq-sd8787 -+ // We should switch to mmc-pwrseq-sd8787 after making it -+ // compatible with sd8887 - // Currently that module requires two GPIOs to function since it - // targets a slightly different chip - power_ctrl: power_ctrl { -@@ -46,10 +48,21 @@ - i2c_soft: i2c@0 { - compatible = "i2c-gpio"; - gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>; -- i2c-gpio,delay-us = <2>; /* ~100 kHz */ -+ i2c-gpio,delay-us = <5>; -+ i2c-gpio,scl-open-drain; -+ i2c-gpio,sda-open-drain; - #address-cells = <1>; - #size-cells = <0>; - }; -+ -+ sd8xxx-wlan { -+ drvdbg = <0x6>; -+ drv_mode = <0x1>; -+ cfg80211_wext = <0xf>; -+ sta_name = "wlan"; -+ wfd_name = "p2p"; -+ cal_data_cfg = "none"; -+ }; - }; - }; - -@@ -74,6 +87,35 @@ - reg = <0x68>; - status = "okay"; - }; -+ -+ // RGB LEDs (>= v1.1.0) -+ pca9633: pca9633@62 { -+ compatible = "nxp,pca9633"; -+ reg = <0x62>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ red@0 { -+ label = "red"; -+ reg = <0>; -+ linux,default-trigger = "none"; -+ }; -+ green@1 { -+ label = "green"; -+ reg = <1>; -+ linux,default-trigger = "none"; -+ }; -+ blue@2 { -+ label = "blue"; -+ reg = <2>; -+ linux,default-trigger = "none"; -+ }; -+ unused@3 { -+ label = "unused"; -+ reg = <3>; -+ linux,default-trigger = "none"; -+ }; -+ }; - }; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0348-bcm2835-mmc-Handle-mmc_add_host-errors.patch b/target/linux/brcm2708/patches-4.19/950-0348-bcm2835-mmc-Handle-mmc_add_host-errors.patch new file mode 100644 index 0000000000..3762f4b70a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0348-bcm2835-mmc-Handle-mmc_add_host-errors.patch @@ -0,0 +1,35 @@ +From 2e2f57e09e1ace18ae01a87d9fc4378c96c54370 Mon Sep 17 00:00:00 2001 +From: Lukas Wunner +Date: Tue, 22 Jan 2019 12:29:45 +0100 +Subject: [PATCH] bcm2835-mmc: Handle mmc_add_host() errors + +The BCM2835 MMC host driver calls mmc_add_host() but doesn't check its +return value. Errors occurring in that function are therefore not +handled. Fix it. + +Signed-off-by: Lukas Wunner +Cc: Frank Pavlic +--- + drivers/mmc/host/bcm2835-mmc.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +--- a/drivers/mmc/host/bcm2835-mmc.c ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -1398,10 +1398,16 @@ static int bcm2835_mmc_add_host(struct b + } + + mmiowb(); +- mmc_add_host(mmc); ++ ret = mmc_add_host(mmc); ++ if (ret) { ++ dev_err(dev, "could not add MMC host\n"); ++ goto free_irq; ++ } + + return 0; + ++free_irq: ++ free_irq(host->irq, host); + untasklet: + tasklet_kill(&host->finish_tasklet); + diff --git a/target/linux/brcm2708/patches-4.19/950-0349-bcm2835-mmc-Deduplicate-reset-of-driver-data-on-remo.patch b/target/linux/brcm2708/patches-4.19/950-0349-bcm2835-mmc-Deduplicate-reset-of-driver-data-on-remo.patch new file mode 100644 index 0000000000..ed3910d7a1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0349-bcm2835-mmc-Deduplicate-reset-of-driver-data-on-remo.patch @@ -0,0 +1,26 @@ +From 3f6e190df3989e10a9baf591a7bf67d754842533 Mon Sep 17 00:00:00 2001 +From: Lukas Wunner +Date: Sat, 19 Jan 2019 08:42:40 +0100 +Subject: [PATCH] bcm2835-mmc: Deduplicate reset of driver data on + remove + +The BCM2835 MMC host driver sets the device's driver data pointer to +NULL on ->remove() even though the driver core subsequently does the +same in __device_release_driver(). Drop the duplicate assignment. + +Signed-off-by: Lukas Wunner +Cc: Frank Pavlic +--- + drivers/mmc/host/bcm2835-mmc.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/drivers/mmc/host/bcm2835-mmc.c ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -1561,7 +1561,6 @@ static int bcm2835_mmc_remove(struct pla + dma_release_channel(host->dma_chan_rxtx); + + mmc_free_host(host->mmc); +- platform_set_drvdata(pdev, NULL); + + return 0; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0350-gpu-vc4-fkms-Update-driver-to-not-use-plane-crtc.patch b/target/linux/brcm2708/patches-4.19/950-0350-gpu-vc4-fkms-Update-driver-to-not-use-plane-crtc.patch deleted file mode 100644 index d2089d7ca3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0350-gpu-vc4-fkms-Update-driver-to-not-use-plane-crtc.patch +++ /dev/null @@ -1,36 +0,0 @@ -From e5285033e0fbfb6750d7d39e7edebf67a16c8434 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 19 Feb 2019 15:06:31 +0000 -Subject: [PATCH 350/806] gpu:vc4-fkms: Update driver to not use plane->crtc. - -Following on from -commit 2f958af7fc248 ("drm/vc4: Stop updating plane->fb/crtc") -do the same in the firmwarekms driver and look at plane_state->crtc -instead. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 4 +--- - 1 file changed, 1 insertion(+), 3 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -193,8 +193,8 @@ static void vc4_cursor_plane_atomic_upda - struct drm_plane_state *old_state) - { - struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -- struct vc4_crtc *vc4_crtc = to_vc4_crtc(plane->crtc); - struct drm_plane_state *state = plane->state; -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); - struct drm_framebuffer *fb = state->fb; - struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); - dma_addr_t addr = bo->paddr + fb->offsets[0]; -@@ -682,8 +682,6 @@ static int vc4_fkms_bind(struct device * - drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane, - &vc4_crtc_funcs, NULL); - drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); -- primary_plane->crtc = crtc; -- cursor_plane->crtc = crtc; - - vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); - if (!vc4_encoder) diff --git a/target/linux/brcm2708/patches-4.19/950-0350-overlays-Add-max17040-support-to-i2c-sensor.patch b/target/linux/brcm2708/patches-4.19/950-0350-overlays-Add-max17040-support-to-i2c-sensor.patch new file mode 100644 index 0000000000..e87cf1a95f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0350-overlays-Add-max17040-support-to-i2c-sensor.patch @@ -0,0 +1,56 @@ +From fe6ccc8df700133615716df211f183c9c27d1e2e Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 25 Mar 2019 18:03:48 +0000 +Subject: [PATCH] overlays: Add max17040 support to i2c-sensor + +See: https://github.com/raspberrypi/linux/issues/2906 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 3 +++ + .../arm/boot/dts/overlays/i2c-sensor-overlay.dts | 16 ++++++++++++++++ + 2 files changed, 19 insertions(+) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1030,6 +1030,9 @@ Params: addr Set the + + lm75addr Deprecated - use addr parameter instead + ++ max17040 Select the Maxim Integrated MAX17040 battery ++ monitor ++ + sht3x Select the Sensiron SHT3x temperature and + humidity sensor. Valid addresses 0x44-0x45, + default 0x44 +--- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -201,6 +201,21 @@ + }; + }; + ++ fragment@13 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ max17040: max17040@36 { ++ compatible = "maxim,max17040"; ++ reg = <0x36>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ + __overrides__ { + addr = <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0", + <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0", +@@ -219,5 +234,6 @@ + veml6070 = <0>,"+10"; + sht3x = <0>,"+11"; + ds1621 = <0>,"+12"; ++ max17040 = <0>,"+13"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0351-drm-vc4-Programming-the-CTM-is-conditional-on-runnin.patch b/target/linux/brcm2708/patches-4.19/950-0351-drm-vc4-Programming-the-CTM-is-conditional-on-runnin.patch deleted file mode 100644 index 956b8107c1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0351-drm-vc4-Programming-the-CTM-is-conditional-on-runnin.patch +++ /dev/null @@ -1,26 +0,0 @@ -From bb8e85deab20dd38c26d354452e1ac42add37530 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 19 Feb 2019 15:18:25 +0000 -Subject: [PATCH 351/806] drm: vc4: Programming the CTM is conditional on - running full KMS - -vc4_ctm_commit writes to HVS registers, so this is only applicable -when in full KMS mode, not in firmware KMS mode. Add this conditional. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_kms.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_kms.c -@@ -147,7 +147,8 @@ vc4_atomic_complete_commit(struct drm_at - - drm_atomic_helper_commit_modeset_disables(dev, state); - -- vc4_ctm_commit(vc4, state); -+ if (!vc4->firmware_kms) -+ vc4_ctm_commit(vc4, state); - - drm_atomic_helper_commit_planes(dev, state, 0); - diff --git a/target/linux/brcm2708/patches-4.19/950-0351-media-bcm2835-unicam-Add-support-for-enum-framesizes.patch b/target/linux/brcm2708/patches-4.19/950-0351-media-bcm2835-unicam-Add-support-for-enum-framesizes.patch new file mode 100644 index 0000000000..c1686f55cd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0351-media-bcm2835-unicam-Add-support-for-enum-framesizes.patch @@ -0,0 +1,133 @@ +From 7c876909bc0a6d23124689d5fca89657a4fcb5a5 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 5 Mar 2019 15:43:27 +0000 +Subject: [PATCH] media: bcm2835-unicam: Add support for enum + framesizes and frameintervals + +vidioc_enum_framesizes and vidioc_enum_frameintervals weren't implemented, +therefore clients couldn't enumerate the supported resolutions. + +Implement them by forwarding on to the sensor driver. + +Signed-off-by: Dave Stevenson +--- + .../media/platform/bcm2835/bcm2835-unicam.c | 94 +++++++++++++++++++ + 1 file changed, 94 insertions(+) + +--- a/drivers/media/platform/bcm2835/bcm2835-unicam.c ++++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c +@@ -1406,6 +1406,84 @@ static int unicam_g_edid(struct file *fi + return v4l2_subdev_call(dev->sensor, pad, get_edid, edid); + } + ++static int unicam_enum_framesizes(struct file *file, void *priv, ++ struct v4l2_frmsizeenum *fsize) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ const struct unicam_fmt *fmt; ++ struct v4l2_subdev_frame_size_enum fse; ++ int ret; ++ ++ /* check for valid format */ ++ fmt = find_format_by_pix(dev, fsize->pixel_format); ++ if (!fmt) { ++ unicam_dbg(3, dev, "Invalid pixel code: %x\n", ++ fsize->pixel_format); ++ return -EINVAL; ++ } ++ ++ fse.index = fsize->index; ++ fse.pad = 0; ++ fse.code = fmt->code; ++ ++ ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_size, NULL, &fse); ++ if (ret) ++ return ret; ++ ++ unicam_dbg(1, dev, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n", ++ __func__, fse.index, fse.code, fse.min_width, fse.max_width, ++ fse.min_height, fse.max_height); ++ ++ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; ++ fsize->discrete.width = fse.max_width; ++ fsize->discrete.height = fse.max_height; ++ ++ return 0; ++} ++ ++static int unicam_enum_frameintervals(struct file *file, void *priv, ++ struct v4l2_frmivalenum *fival) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ const struct unicam_fmt *fmt; ++ struct v4l2_subdev_frame_interval_enum fie = { ++ .index = fival->index, ++ .width = fival->width, ++ .height = fival->height, ++ .which = V4L2_SUBDEV_FORMAT_ACTIVE, ++ }; ++ int ret; ++ ++ fmt = find_format_by_pix(dev, fival->pixel_format); ++ if (!fmt) ++ return -EINVAL; ++ ++ fie.code = fmt->code; ++ ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_interval, ++ NULL, &fie); ++ if (ret) ++ return ret; ++ ++ fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; ++ fival->discrete = fie.interval; ++ ++ return 0; ++} ++ ++static int unicam_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_g_parm_cap(video_devdata(file), dev->sensor, a); ++} ++ ++static int unicam_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a) ++{ ++ struct unicam_device *dev = video_drvdata(file); ++ ++ return v4l2_s_parm_cap(video_devdata(file), dev->sensor, a); ++} ++ + static int unicam_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) + { +@@ -1613,6 +1691,12 @@ static const struct v4l2_ioctl_ops unica + .vidioc_g_edid = unicam_g_edid, + .vidioc_s_edid = unicam_s_edid, + ++ .vidioc_enum_framesizes = unicam_enum_framesizes, ++ .vidioc_enum_frameintervals = unicam_enum_frameintervals, ++ ++ .vidioc_g_parm = unicam_g_parm, ++ .vidioc_s_parm = unicam_s_parm, ++ + .vidioc_s_dv_timings = unicam_s_dv_timings, + .vidioc_g_dv_timings = unicam_g_dv_timings, + .vidioc_query_dv_timings = unicam_query_dv_timings, +@@ -1850,6 +1934,16 @@ static int unicam_probe_complete(struct + v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUM_DV_TIMINGS); + v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERY_DV_TIMINGS); + } ++ if (!v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_interval)) ++ v4l2_disable_ioctl(&unicam->video_dev, ++ VIDIOC_ENUM_FRAMEINTERVALS); ++ if (!v4l2_subdev_has_op(unicam->sensor, video, g_frame_interval)) ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_PARM); ++ if (!v4l2_subdev_has_op(unicam->sensor, video, s_frame_interval)) ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_PARM); ++ ++ if (!v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_size)) ++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUM_FRAMESIZES); + + ret = v4l2_device_register_subdev_nodes(&unicam->v4l2_dev); + if (ret) { diff --git a/target/linux/brcm2708/patches-4.19/950-0352-staging-bcm2835-codec-Refactor-default-resolution-co.patch b/target/linux/brcm2708/patches-4.19/950-0352-staging-bcm2835-codec-Refactor-default-resolution-co.patch new file mode 100644 index 0000000000..cd592e27da --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0352-staging-bcm2835-codec-Refactor-default-resolution-co.patch @@ -0,0 +1,154 @@ +From a97baa799a8069fe965a4d194935c025e21acf8e Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 20 Mar 2019 10:06:51 +0000 +Subject: [PATCH] staging: bcm2835-codec: Refactor default resolution + code + +The default resolution code was different for each role +as compressed formats need to pass bytesperline as 0 and +set up customised buffer sizes. +This is common setup, therefore amend get_sizeimage and +get_bytesperline to do the correct thing whether compressed +or uncompressed. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 103 +++++++----------- + 1 file changed, 40 insertions(+), 63 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -578,10 +578,17 @@ static void job_abort(void *priv) + ctx->aborting = 1; + } + +-static inline unsigned int get_sizeimage(int bpl, int height, ++static inline unsigned int get_sizeimage(int bpl, int width, int height, + struct bcm2835_codec_fmt *fmt) + { +- return (bpl * height * fmt->size_multiplier_x2) >> 1; ++ if (fmt->flags & V4L2_FMT_FLAG_COMPRESSED) { ++ if (width * height > 1280 * 720) ++ return DEF_COMP_BUF_SIZE_GREATER_720P; ++ else ++ return DEF_COMP_BUF_SIZE_720P_OR_LESS; ++ } else { ++ return (bpl * height * fmt->size_multiplier_x2) >> 1; ++ } + } + + static inline unsigned int get_bytesperline(int width, +@@ -1032,22 +1039,13 @@ static int vidioc_try_fmt(struct v4l2_fo + * some of the pixels are active. + */ + f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); +- +- f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, +- fmt); +- f->fmt.pix.sizeimage = get_sizeimage(f->fmt.pix.bytesperline, +- f->fmt.pix.height, +- fmt); +- } else { +- u32 min_size = f->fmt.pix.width > 1280 || +- f->fmt.pix.height > 720 ? +- DEF_COMP_BUF_SIZE_GREATER_720P : +- DEF_COMP_BUF_SIZE_720P_OR_LESS; +- +- f->fmt.pix.bytesperline = 0; +- if (f->fmt.pix.sizeimage < min_size) +- f->fmt.pix.sizeimage = min_size; + } ++ f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, ++ fmt); ++ f->fmt.pix.sizeimage = get_sizeimage(f->fmt.pix.bytesperline, ++ f->fmt.pix.width, ++ f->fmt.pix.height, ++ fmt); + + f->fmt.pix.field = V4L2_FIELD_NONE; + +@@ -1159,6 +1157,7 @@ static int vidioc_s_fmt(struct bcm2835_c + q_data_dst->bytesperline = + get_bytesperline(f->fmt.pix.width, q_data_dst->fmt); + q_data_dst->sizeimage = get_sizeimage(q_data_dst->bytesperline, ++ q_data_dst->crop_width, + q_data_dst->height, + q_data_dst->fmt); + update_capture_port = true; +@@ -2218,52 +2217,30 @@ static int bcm2835_codec_open(struct fil + + ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev, false); + ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev, true); +- switch (dev->role) { +- case DECODE: +- /* +- * Input width and height are irrelevant as they will be defined +- * by the bitstream not the format. Required by V4L2 though. +- */ +- ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; +- ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; +- ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; +- ctx->q_data[V4L2_M2M_SRC].bytesperline = 0; +- ctx->q_data[V4L2_M2M_SRC].sizeimage = +- DEF_COMP_BUF_SIZE_720P_OR_LESS; +- +- ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; +- ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; +- ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; +- ctx->q_data[V4L2_M2M_DST].bytesperline = +- get_bytesperline(DEFAULT_WIDTH, +- ctx->q_data[V4L2_M2M_DST].fmt); +- ctx->q_data[V4L2_M2M_DST].sizeimage = +- get_sizeimage(ctx->q_data[V4L2_M2M_DST].bytesperline, +- ctx->q_data[V4L2_M2M_DST].height, +- ctx->q_data[V4L2_M2M_DST].fmt); +- break; +- case ENCODE: +- ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; +- ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; +- ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; +- ctx->q_data[V4L2_M2M_SRC].bytesperline = +- get_bytesperline(DEFAULT_WIDTH, +- ctx->q_data[V4L2_M2M_SRC].fmt); +- ctx->q_data[V4L2_M2M_SRC].sizeimage = +- get_sizeimage(ctx->q_data[V4L2_M2M_SRC].bytesperline, +- ctx->q_data[V4L2_M2M_SRC].height, +- ctx->q_data[V4L2_M2M_SRC].fmt); +- +- ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; +- ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; +- ctx->q_data[V4L2_M2M_DST].bytesperline = 0; +- ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; +- ctx->q_data[V4L2_M2M_DST].sizeimage = +- DEF_COMP_BUF_SIZE_720P_OR_LESS; +- break; +- case ISP: +- break; +- } ++ ++ ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; ++ ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_SRC].bytesperline = ++ get_bytesperline(DEFAULT_WIDTH, ++ ctx->q_data[V4L2_M2M_SRC].fmt); ++ ctx->q_data[V4L2_M2M_SRC].sizeimage = ++ get_sizeimage(ctx->q_data[V4L2_M2M_SRC].bytesperline, ++ ctx->q_data[V4L2_M2M_SRC].crop_width, ++ ctx->q_data[V4L2_M2M_SRC].height, ++ ctx->q_data[V4L2_M2M_SRC].fmt); ++ ++ ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; ++ ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; ++ ctx->q_data[V4L2_M2M_DST].bytesperline = ++ get_bytesperline(DEFAULT_WIDTH, ++ ctx->q_data[V4L2_M2M_DST].fmt); ++ ctx->q_data[V4L2_M2M_DST].sizeimage = ++ get_sizeimage(ctx->q_data[V4L2_M2M_DST].bytesperline, ++ ctx->q_data[V4L2_M2M_DST].crop_width, ++ ctx->q_data[V4L2_M2M_DST].height, ++ ctx->q_data[V4L2_M2M_DST].fmt); + + ctx->colorspace = V4L2_COLORSPACE_REC709; + ctx->bitrate = 10 * 1000 * 1000; diff --git a/target/linux/brcm2708/patches-4.19/950-0352-staging-mmal_vchiq-Add-in-the-Bayer-encoding-formats.patch b/target/linux/brcm2708/patches-4.19/950-0352-staging-mmal_vchiq-Add-in-the-Bayer-encoding-formats.patch deleted file mode 100644 index d7d2ae0d00..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0352-staging-mmal_vchiq-Add-in-the-Bayer-encoding-formats.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 39c4b77533bee8d88d2f4c9be9463041ec1dd483 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 13 Feb 2019 12:33:29 +0000 -Subject: [PATCH 352/806] staging: mmal_vchiq: Add in the Bayer encoding - formats - -The list of formats was copied before Bayer support was added. -The ISP supports Bayer and is being supported by the bcm2835_codec -driver, so add in the encodings for them. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/vchiq-mmal/mmal-encodings.h | 27 +++++++++++++++++++ - 1 file changed, 27 insertions(+) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-encodings.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-encodings.h -@@ -69,6 +69,33 @@ - */ - #define MMAL_ENCODING_OPAQUE MMAL_FOURCC('O', 'P', 'Q', 'V') - -+/* Bayer formats -+ * FourCC values copied from V4L2 where defined. -+ */ -+/* 8 bit per pixel Bayer formats. */ -+#define MMAL_ENCODING_BAYER_SBGGR8 MMAL_FOURCC('B', 'A', '8', '1') -+#define MMAL_ENCODING_BAYER_SGBRG8 MMAL_FOURCC('G', 'B', 'R', 'G') -+#define MMAL_ENCODING_BAYER_SGRBG8 MMAL_FOURCC('G', 'R', 'B', 'G') -+#define MMAL_ENCODING_BAYER_SRGGB8 MMAL_FOURCC('R', 'G', 'G', 'B') -+ -+/* 10 bit per pixel packed Bayer formats. */ -+#define MMAL_ENCODING_BAYER_SBGGR10P MMAL_FOURCC('p', 'B', 'A', 'A') -+#define MMAL_ENCODING_BAYER_SGRBG10P MMAL_FOURCC('p', 'g', 'A', 'A') -+#define MMAL_ENCODING_BAYER_SGBRG10P MMAL_FOURCC('p', 'G', 'A', 'A') -+#define MMAL_ENCODING_BAYER_SRGGB10P MMAL_FOURCC('p', 'R', 'A', 'A') -+ -+/* 12 bit per pixel packed Bayer formats. */ -+#define MMAL_ENCODING_BAYER_SBGGR12P MMAL_FOURCC('p', 'B', '1', '2') -+#define MMAL_ENCODING_BAYER_SGRBG12P MMAL_FOURCC('p', 'g', '1', '2') -+#define MMAL_ENCODING_BAYER_SGBRG12P MMAL_FOURCC('p', 'G', '1', '2') -+#define MMAL_ENCODING_BAYER_SRGGB12P MMAL_FOURCC('p', 'R', '1', '2') -+ -+/* 16 bit per pixel Bayer formats. */ -+#define MMAL_ENCODING_BAYER_SBGGR16 MMAL_FOURCC('B', 'G', '1', '6') -+#define MMAL_ENCODING_BAYER_SGBRG16 MMAL_FOURCC('G', 'B', '1', '6') -+#define MMAL_ENCODING_BAYER_SGRBG16 MMAL_FOURCC('G', 'R', '1', '6') -+#define MMAL_ENCODING_BAYER_SRGGB16 MMAL_FOURCC('R', 'G', '1', '6') -+ - /** An EGL image handle - */ - #define MMAL_ENCODING_EGL_IMAGE MMAL_FOURCC('E', 'G', 'L', 'I') diff --git a/target/linux/brcm2708/patches-4.19/950-0353-nvmem-add-type-attribute.patch b/target/linux/brcm2708/patches-4.19/950-0353-nvmem-add-type-attribute.patch new file mode 100644 index 0000000000..661ba8e33d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0353-nvmem-add-type-attribute.patch @@ -0,0 +1,131 @@ +From c9e76146066660a2884e61216c1ce227cf509bf8 Mon Sep 17 00:00:00 2001 +From: Alexandre Belloni +Date: Fri, 30 Nov 2018 11:53:20 +0000 +Subject: [PATCH] nvmem: add type attribute + +commit 16688453661b6d5159be558a1f8c1f54463a420f upstream. + +Add a type attribute so userspace is able to know how the data is stored as +this can help taking the correct decision when selecting which device to +use. This will also help program display the proper warnings when burning +fuses for example. + +Signed-off-by: Alexandre Belloni +Signed-off-by: Srinivas Kandagatla +Signed-off-by: Greg Kroah-Hartman +--- + drivers/nvmem/core.c | 21 +++++++++++++++++++++ + include/linux/nvmem-provider.h | 16 ++++++++++++++++ + 2 files changed, 37 insertions(+) + +--- a/drivers/nvmem/core.c ++++ b/drivers/nvmem/core.c +@@ -36,6 +36,7 @@ struct nvmem_device { + size_t size; + bool read_only; + int flags; ++ enum nvmem_type type; + struct bin_attribute eeprom; + struct device *base_dev; + nvmem_reg_read_t reg_read; +@@ -84,6 +85,21 @@ static int nvmem_reg_write(struct nvmem_ + return -EINVAL; + } + ++static ssize_t type_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct nvmem_device *nvmem = to_nvmem_device(dev); ++ ++ return sprintf(buf, "%s\n", nvmem_type_str[nvmem->type]); ++} ++ ++static DEVICE_ATTR_RO(type); ++ ++static struct attribute *nvmem_attrs[] = { ++ &dev_attr_type.attr, ++ NULL, ++}; ++ + static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t pos, size_t count) +@@ -169,6 +185,7 @@ static struct bin_attribute *nvmem_bin_r + + static const struct attribute_group nvmem_bin_rw_group = { + .bin_attrs = nvmem_bin_rw_attributes, ++ .attrs = nvmem_attrs, + }; + + static const struct attribute_group *nvmem_rw_dev_groups[] = { +@@ -192,6 +209,7 @@ static struct bin_attribute *nvmem_bin_r + + static const struct attribute_group nvmem_bin_ro_group = { + .bin_attrs = nvmem_bin_ro_attributes, ++ .attrs = nvmem_attrs, + }; + + static const struct attribute_group *nvmem_ro_dev_groups[] = { +@@ -216,6 +234,7 @@ static struct bin_attribute *nvmem_bin_r + + static const struct attribute_group nvmem_bin_rw_root_group = { + .bin_attrs = nvmem_bin_rw_root_attributes, ++ .attrs = nvmem_attrs, + }; + + static const struct attribute_group *nvmem_rw_root_dev_groups[] = { +@@ -239,6 +258,7 @@ static struct bin_attribute *nvmem_bin_r + + static const struct attribute_group nvmem_bin_ro_root_group = { + .bin_attrs = nvmem_bin_ro_root_attributes, ++ .attrs = nvmem_attrs, + }; + + static const struct attribute_group *nvmem_ro_root_dev_groups[] = { +@@ -485,6 +505,7 @@ struct nvmem_device *nvmem_register(cons + nvmem->dev.bus = &nvmem_bus_type; + nvmem->dev.parent = config->dev; + nvmem->priv = config->priv; ++ nvmem->type = config->type; + nvmem->reg_read = config->reg_read; + nvmem->reg_write = config->reg_write; + nvmem->dev.of_node = config->dev->of_node; +--- a/include/linux/nvmem-provider.h ++++ b/include/linux/nvmem-provider.h +@@ -22,6 +22,20 @@ typedef int (*nvmem_reg_read_t)(void *pr + typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset, + void *val, size_t bytes); + ++enum nvmem_type { ++ NVMEM_TYPE_UNKNOWN = 0, ++ NVMEM_TYPE_EEPROM, ++ NVMEM_TYPE_OTP, ++ NVMEM_TYPE_BATTERY_BACKED, ++}; ++ ++static const char * const nvmem_type_str[] = { ++ [NVMEM_TYPE_UNKNOWN] = "Unknown", ++ [NVMEM_TYPE_EEPROM] = "EEPROM", ++ [NVMEM_TYPE_OTP] = "OTP", ++ [NVMEM_TYPE_BATTERY_BACKED] = "Battery backed", ++}; ++ + /** + * struct nvmem_config - NVMEM device configuration + * +@@ -31,6 +45,7 @@ typedef int (*nvmem_reg_write_t)(void *p + * @owner: Pointer to exporter module. Used for refcounting. + * @cells: Optional array of pre-defined NVMEM cells. + * @ncells: Number of elements in cells. ++ * @type: Type of the nvmem storage + * @read_only: Device is read-only. + * @root_only: Device is accessibly to root only. + * @reg_read: Callback to read data. +@@ -54,6 +69,7 @@ struct nvmem_config { + struct module *owner; + const struct nvmem_cell_info *cells; + int ncells; ++ enum nvmem_type type; + bool read_only; + bool root_only; + nvmem_reg_read_t reg_read; diff --git a/target/linux/brcm2708/patches-4.19/950-0353-staging-mmal-vchiq-Always-return-the-param-size-from.patch b/target/linux/brcm2708/patches-4.19/950-0353-staging-mmal-vchiq-Always-return-the-param-size-from.patch deleted file mode 100644 index d43c638fdc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0353-staging-mmal-vchiq-Always-return-the-param-size-from.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 0c0e55d9b04868733f30c348df7400fa5e6d30e2 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 13 Feb 2019 12:36:56 +0000 -Subject: [PATCH 353/806] staging: mmal-vchiq: Always return the param size - from param_get - -mmal-vchiq is a reimplementation of the userland library for MMAL. -When getting a parameter, the client provides the storage and -the size of the storage. The VPU then returns the size of the -parameter that it wished to return, and as much as possible of -that parameter is returned to the client. - -The implementation previously only returned the size provided -by the VPU should it exceed the buffer size. So for parameters -such as the supported encodings list the client had no idea -how much of the provided storage had been populated. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -1413,11 +1413,12 @@ static int port_parameter_get(struct vch - */ - memcpy(value, &rmsg->u.port_parameter_get_reply.value, - *value_size); -- *value_size = rmsg->u.port_parameter_get_reply.size; - } else { - memcpy(value, &rmsg->u.port_parameter_get_reply.value, - rmsg->u.port_parameter_get_reply.size); - } -+ /* Always report the size of the returned parameter to the caller */ -+ *value_size = rmsg->u.port_parameter_get_reply.size; - - pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, - ret, port->component->handle, port->handle, parameter_id); diff --git a/target/linux/brcm2708/patches-4.19/950-0354-rtc-rv3028-add-new-driver.patch b/target/linux/brcm2708/patches-4.19/950-0354-rtc-rv3028-add-new-driver.patch new file mode 100644 index 0000000000..6a00e82300 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0354-rtc-rv3028-add-new-driver.patch @@ -0,0 +1,860 @@ +From bb0e317bfc453877805a12f975490ad38b6413f1 Mon Sep 17 00:00:00 2001 +From: Alexandre Belloni +Date: Wed, 13 Feb 2019 00:21:36 +0100 +Subject: [PATCH] rtc: rv3028: add new driver + +upstream commit e6e7376cfd7b3f9b63de3a22792f64d9bfb2ab53. + +Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock +Module that incorporates an integrated CMOS circuit together with an XTAL. +It has an i2c interface. + +The driver handles date/time, alarms, trickle charging, timestamping, +frequency offset correction, EEPROM and NVRAM. + +Signed-off-by: Alexandre Belloni +--- + Documentation/devicetree/bindings/rtc/rtc.txt | 69 ++ + drivers/rtc/Kconfig | 9 + + drivers/rtc/Makefile | 1 + + drivers/rtc/rtc-rv3028.c | 733 ++++++++++++++++++ + 4 files changed, 812 insertions(+) + create mode 100644 Documentation/devicetree/bindings/rtc/rtc.txt + create mode 100644 drivers/rtc/rtc-rv3028.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/rtc/rtc.txt +@@ -0,0 +1,69 @@ ++Generic device tree bindings for Real Time Clock devices ++======================================================== ++ ++This document describes generic bindings which can be used to describe Real Time ++Clock devices in a device tree. ++ ++Required properties ++------------------- ++ ++- compatible : name of RTC device following generic names recommended practice. ++ ++For other required properties e.g. to describe register sets, ++clocks, etc. check the binding documentation of the specific driver. ++ ++Optional properties ++------------------- ++ ++- start-year : if provided, the default hardware range supported by the RTC is ++ shifted so the first usable year is the specified one. ++ ++The following properties may not be supported by all drivers. However, if a ++driver wants to support one of the below features, it should adapt the bindings ++below. ++- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given ++ if trickle charger should be enabled ++- trickle-diode-disable : Do not use internal trickle charger diode Should be ++ given if internal trickle charger diode should be ++ disabled ++- wakeup-source : Enables wake up of host system on alarm ++- quartz-load-femtofarads : The capacitive load of the quartz(x-tal), ++ expressed in femto Farad (fF). ++ The default value shall be listed (if optional), ++ and likewise all valid values. ++ ++Trivial RTCs ++------------ ++ ++This is a list of trivial RTC devices that have simple device tree ++bindings, consisting only of a compatible field, an address and ++possibly an interrupt line. ++ ++ ++Compatible Vendor / Chip ++========== ============= ++abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface ++dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output ++dallas,ds1672 Dallas DS1672 Real-time Clock ++dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM ++epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE ++epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE ++emmicro,em3027 EM Microelectronic EM3027 Real-time Clock ++isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM ++isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM ++isil,isl12022 Intersil ISL12022 Real-time Clock ++microcrystal,rv3028 Real Time Clock Module with I2C-Bus ++microcrystal,rv3029 Real Time Clock Module with I2C-Bus ++microcrystal,rv8523 Real Time Clock ++nxp,pcf2127 Real-time clock ++nxp,pcf2129 Real-time clock ++nxp,pcf8563 Real-time clock/calendar ++pericom,pt7c4338 Real-time Clock Module ++ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ++ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ++ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ++ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ++ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ++ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ++sii,s35390a 2-wire CMOS real-time clock ++whwave,sd3078 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +--- a/drivers/rtc/Kconfig ++++ b/drivers/rtc/Kconfig +@@ -625,6 +625,15 @@ config RTC_DRV_EM3027 + This driver can also be built as a module. If so, the module + will be called rtc-em3027. + ++config RTC_DRV_RV3028 ++ tristate "Micro Crystal RV3028" ++ help ++ If you say yes here you get support for the Micro Crystal ++ RV3028. ++ ++ This driver can also be built as a module. If so, the module ++ will be called rtc-rv3028. ++ + config RTC_DRV_RV8803 + tristate "Micro Crystal RV8803, Epson RX8900" + help +--- a/drivers/rtc/Makefile ++++ b/drivers/rtc/Makefile +@@ -136,6 +136,7 @@ obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5 + obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o + obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o + obj-$(CONFIG_RTC_DRV_RTD119X) += rtc-rtd119x.o ++obj-$(CONFIG_RTC_DRV_RV3028) += rtc-rv3028.o + obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o + obj-$(CONFIG_RTC_DRV_RV8803) += rtc-rv8803.o + obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o +--- /dev/null ++++ b/drivers/rtc/rtc-rv3028.c +@@ -0,0 +1,733 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * RTC driver for the Micro Crystal RV3028 ++ * ++ * Copyright (C) 2019 Micro Crystal SA ++ * ++ * Alexandre Belloni ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "rtc-core.h" ++ ++#define RV3028_SEC 0x00 ++#define RV3028_MIN 0x01 ++#define RV3028_HOUR 0x02 ++#define RV3028_WDAY 0x03 ++#define RV3028_DAY 0x04 ++#define RV3028_MONTH 0x05 ++#define RV3028_YEAR 0x06 ++#define RV3028_ALARM_MIN 0x07 ++#define RV3028_ALARM_HOUR 0x08 ++#define RV3028_ALARM_DAY 0x09 ++#define RV3028_STATUS 0x0E ++#define RV3028_CTRL1 0x0F ++#define RV3028_CTRL2 0x10 ++#define RV3028_EVT_CTRL 0x13 ++#define RV3028_TS_COUNT 0x14 ++#define RV3028_TS_SEC 0x15 ++#define RV3028_RAM1 0x1F ++#define RV3028_EEPROM_ADDR 0x25 ++#define RV3028_EEPROM_DATA 0x26 ++#define RV3028_EEPROM_CMD 0x27 ++#define RV3028_CLKOUT 0x35 ++#define RV3028_OFFSET 0x36 ++#define RV3028_BACKUP 0x37 ++ ++#define RV3028_STATUS_PORF BIT(0) ++#define RV3028_STATUS_EVF BIT(1) ++#define RV3028_STATUS_AF BIT(2) ++#define RV3028_STATUS_TF BIT(3) ++#define RV3028_STATUS_UF BIT(4) ++#define RV3028_STATUS_BSF BIT(5) ++#define RV3028_STATUS_CLKF BIT(6) ++#define RV3028_STATUS_EEBUSY BIT(7) ++ ++#define RV3028_CTRL1_EERD BIT(3) ++#define RV3028_CTRL1_WADA BIT(5) ++ ++#define RV3028_CTRL2_RESET BIT(0) ++#define RV3028_CTRL2_12_24 BIT(1) ++#define RV3028_CTRL2_EIE BIT(2) ++#define RV3028_CTRL2_AIE BIT(3) ++#define RV3028_CTRL2_TIE BIT(4) ++#define RV3028_CTRL2_UIE BIT(5) ++#define RV3028_CTRL2_TSE BIT(7) ++ ++#define RV3028_EVT_CTRL_TSR BIT(2) ++ ++#define RV3028_EEPROM_CMD_WRITE 0x21 ++#define RV3028_EEPROM_CMD_READ 0x22 ++ ++#define RV3028_EEBUSY_POLL 10000 ++#define RV3028_EEBUSY_TIMEOUT 100000 ++ ++#define RV3028_BACKUP_TCE BIT(5) ++#define RV3028_BACKUP_TCR_MASK GENMASK(1,0) ++ ++#define OFFSET_STEP_PPT 953674 ++ ++enum rv3028_type { ++ rv_3028, ++}; ++ ++struct rv3028_data { ++ struct regmap *regmap; ++ struct rtc_device *rtc; ++ enum rv3028_type type; ++}; ++ ++static u16 rv3028_trickle_resistors[] = {1000, 3000, 6000, 11000}; ++ ++static ssize_t timestamp0_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent); ++ ++ regmap_update_bits(rv3028->regmap, RV3028_EVT_CTRL, RV3028_EVT_CTRL_TSR, ++ RV3028_EVT_CTRL_TSR); ++ ++ return count; ++}; ++ ++static ssize_t timestamp0_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent); ++ struct rtc_time tm; ++ int ret, count; ++ u8 date[6]; ++ ++ ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count); ++ if (ret) ++ return ret; ++ ++ if (!count) ++ return 0; ++ ++ ret = regmap_bulk_read(rv3028->regmap, RV3028_TS_SEC, date, ++ sizeof(date)); ++ if (ret) ++ return ret; ++ ++ tm.tm_sec = bcd2bin(date[0]); ++ tm.tm_min = bcd2bin(date[1]); ++ tm.tm_hour = bcd2bin(date[2]); ++ tm.tm_mday = bcd2bin(date[3]); ++ tm.tm_mon = bcd2bin(date[4]) - 1; ++ tm.tm_year = bcd2bin(date[5]) + 100; ++ ++ ret = rtc_valid_tm(&tm); ++ if (ret) ++ return ret; ++ ++ return sprintf(buf, "%llu\n", ++ (unsigned long long)rtc_tm_to_time64(&tm)); ++}; ++ ++static DEVICE_ATTR_RW(timestamp0); ++ ++static ssize_t timestamp0_count_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent); ++ int ret, count; ++ ++ ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count); ++ if (ret) ++ return ret; ++ ++ return sprintf(buf, "%u\n", count); ++}; ++ ++static DEVICE_ATTR_RO(timestamp0_count); ++ ++static struct attribute *rv3028_attrs[] = { ++ &dev_attr_timestamp0.attr, ++ &dev_attr_timestamp0_count.attr, ++ NULL ++}; ++ ++static const struct attribute_group rv3028_attr_group = { ++ .attrs = rv3028_attrs, ++}; ++ ++static irqreturn_t rv3028_handle_irq(int irq, void *dev_id) ++{ ++ struct rv3028_data *rv3028 = dev_id; ++ unsigned long events = 0; ++ u32 status = 0, ctrl = 0; ++ ++ if (regmap_read(rv3028->regmap, RV3028_STATUS, &status) < 0 || ++ status == 0) { ++ return IRQ_NONE; ++ } ++ ++ if (status & RV3028_STATUS_PORF) ++ dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n"); ++ ++ if (status & RV3028_STATUS_TF) { ++ status |= RV3028_STATUS_TF; ++ ctrl |= RV3028_CTRL2_TIE; ++ events |= RTC_PF; ++ } ++ ++ if (status & RV3028_STATUS_AF) { ++ status |= RV3028_STATUS_AF; ++ ctrl |= RV3028_CTRL2_AIE; ++ events |= RTC_AF; ++ } ++ ++ if (status & RV3028_STATUS_UF) { ++ status |= RV3028_STATUS_UF; ++ ctrl |= RV3028_CTRL2_UIE; ++ events |= RTC_UF; ++ } ++ ++ if (events) { ++ rtc_update_irq(rv3028->rtc, 1, events); ++ regmap_update_bits(rv3028->regmap, RV3028_STATUS, status, 0); ++ regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ctrl, 0); ++ } ++ ++ if (status & RV3028_STATUS_EVF) { ++ sysfs_notify(&rv3028->rtc->dev.kobj, NULL, ++ dev_attr_timestamp0.attr.name); ++ dev_warn(&rv3028->rtc->dev, "event detected"); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static int rv3028_get_time(struct device *dev, struct rtc_time *tm) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev); ++ u8 date[7]; ++ int ret, status; ++ ++ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); ++ if (ret < 0) ++ return ret; ++ ++ if (status & RV3028_STATUS_PORF) { ++ dev_warn(dev, "Voltage low, data is invalid.\n"); ++ return -EINVAL; ++ } ++ ++ ret = regmap_bulk_read(rv3028->regmap, RV3028_SEC, date, sizeof(date)); ++ if (ret) ++ return ret; ++ ++ tm->tm_sec = bcd2bin(date[RV3028_SEC] & 0x7f); ++ tm->tm_min = bcd2bin(date[RV3028_MIN] & 0x7f); ++ tm->tm_hour = bcd2bin(date[RV3028_HOUR] & 0x3f); ++ tm->tm_wday = ilog2(date[RV3028_WDAY] & 0x7f); ++ tm->tm_mday = bcd2bin(date[RV3028_DAY] & 0x3f); ++ tm->tm_mon = bcd2bin(date[RV3028_MONTH] & 0x1f) - 1; ++ tm->tm_year = bcd2bin(date[RV3028_YEAR]) + 100; ++ ++ return 0; ++} ++ ++static int rv3028_set_time(struct device *dev, struct rtc_time *tm) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev); ++ u8 date[7]; ++ int ret; ++ ++ date[RV3028_SEC] = bin2bcd(tm->tm_sec); ++ date[RV3028_MIN] = bin2bcd(tm->tm_min); ++ date[RV3028_HOUR] = bin2bcd(tm->tm_hour); ++ date[RV3028_WDAY] = 1 << (tm->tm_wday); ++ date[RV3028_DAY] = bin2bcd(tm->tm_mday); ++ date[RV3028_MONTH] = bin2bcd(tm->tm_mon + 1); ++ date[RV3028_YEAR] = bin2bcd(tm->tm_year - 100); ++ ++ /* ++ * Writing to the Seconds register has the same effect as setting RESET ++ * bit to 1 ++ */ ++ ret = regmap_bulk_write(rv3028->regmap, RV3028_SEC, date, ++ sizeof(date)); ++ if (ret) ++ return ret; ++ ++ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, ++ RV3028_STATUS_PORF, 0); ++ ++ return ret; ++} ++ ++static int rv3028_get_alarm(struct device *dev, struct rtc_wkalrm *alrm) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev); ++ u8 alarmvals[3]; ++ int status, ctrl, ret; ++ ++ ret = regmap_bulk_read(rv3028->regmap, RV3028_ALARM_MIN, alarmvals, ++ sizeof(alarmvals)); ++ if (ret) ++ return ret; ++ ++ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); ++ if (ret < 0) ++ return ret; ++ ++ ret = regmap_read(rv3028->regmap, RV3028_CTRL2, &ctrl); ++ if (ret < 0) ++ return ret; ++ ++ alrm->time.tm_sec = 0; ++ alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f); ++ alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f); ++ alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f); ++ ++ alrm->enabled = !!(ctrl & RV3028_CTRL2_AIE); ++ alrm->pending = (status & RV3028_STATUS_AF) && alrm->enabled; ++ ++ return 0; ++} ++ ++static int rv3028_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev); ++ u8 alarmvals[3]; ++ u8 ctrl = 0; ++ int ret; ++ ++ /* The alarm has no seconds, round up to nearest minute */ ++ if (alrm->time.tm_sec) { ++ time64_t alarm_time = rtc_tm_to_time64(&alrm->time); ++ ++ alarm_time += 60 - alrm->time.tm_sec; ++ rtc_time64_to_tm(alarm_time, &alrm->time); ++ } ++ ++ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ++ RV3028_CTRL2_AIE | RV3028_CTRL2_UIE, 0); ++ if (ret) ++ return ret; ++ ++ alarmvals[0] = bin2bcd(alrm->time.tm_min); ++ alarmvals[1] = bin2bcd(alrm->time.tm_hour); ++ alarmvals[2] = bin2bcd(alrm->time.tm_mday); ++ ++ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, ++ RV3028_STATUS_AF, 0); ++ if (ret) ++ return ret; ++ ++ ret = regmap_bulk_write(rv3028->regmap, RV3028_ALARM_MIN, alarmvals, ++ sizeof(alarmvals)); ++ if (ret) ++ return ret; ++ ++ if (alrm->enabled) { ++ if (rv3028->rtc->uie_rtctimer.enabled) ++ ctrl |= RV3028_CTRL2_UIE; ++ if (rv3028->rtc->aie_timer.enabled) ++ ctrl |= RV3028_CTRL2_AIE; ++ } ++ ++ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ++ RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl); ++ ++ return ret; ++} ++ ++static int rv3028_alarm_irq_enable(struct device *dev, unsigned int enabled) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev); ++ int ctrl = 0, ret; ++ ++ if (enabled) { ++ if (rv3028->rtc->uie_rtctimer.enabled) ++ ctrl |= RV3028_CTRL2_UIE; ++ if (rv3028->rtc->aie_timer.enabled) ++ ctrl |= RV3028_CTRL2_AIE; ++ } ++ ++ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, ++ RV3028_STATUS_AF | RV3028_STATUS_UF, 0); ++ if (ret) ++ return ret; ++ ++ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ++ RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int rv3028_read_offset(struct device *dev, long *offset) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev); ++ int ret, value, steps; ++ ++ ret = regmap_read(rv3028->regmap, RV3028_OFFSET, &value); ++ if (ret < 0) ++ return ret; ++ ++ steps = sign_extend32(value << 1, 8); ++ ++ ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &value); ++ if (ret < 0) ++ return ret; ++ ++ steps += value >> 7; ++ ++ *offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000); ++ ++ return 0; ++} ++ ++static int rv3028_set_offset(struct device *dev, long offset) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev); ++ int ret; ++ ++ offset = clamp(offset, -244141L, 243187L) * 1000; ++ offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT); ++ ++ ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1); ++ if (ret < 0) ++ return ret; ++ ++ return regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7), ++ offset << 7); ++} ++ ++static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) ++{ ++ struct rv3028_data *rv3028 = dev_get_drvdata(dev); ++ int status, ret = 0; ++ ++ switch (cmd) { ++ case RTC_VL_READ: ++ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); ++ if (ret < 0) ++ return ret; ++ ++ if (status & RV3028_STATUS_PORF) ++ dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n"); ++ ++ status &= RV3028_STATUS_PORF; ++ ++ if (copy_to_user((void __user *)arg, &status, sizeof(int))) ++ return -EFAULT; ++ ++ return 0; ++ ++ case RTC_VL_CLR: ++ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, ++ RV3028_STATUS_PORF, 0); ++ ++ return ret; ++ ++ default: ++ return -ENOIOCTLCMD; ++ } ++} ++ ++static int rv3028_nvram_write(void *priv, unsigned int offset, void *val, ++ size_t bytes) ++{ ++ return regmap_bulk_write(priv, RV3028_RAM1 + offset, val, bytes); ++} ++ ++static int rv3028_nvram_read(void *priv, unsigned int offset, void *val, ++ size_t bytes) ++{ ++ return regmap_bulk_read(priv, RV3028_RAM1 + offset, val, bytes); ++} ++ ++static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val, ++ size_t bytes) ++{ ++ u32 status, ctrl1; ++ int i, ret, err; ++ u8 *buf = val; ++ ++ ret = regmap_read(priv, RV3028_CTRL1, &ctrl1); ++ if (ret) ++ return ret; ++ ++ if (!(ctrl1 & RV3028_CTRL1_EERD)) { ++ ret = regmap_update_bits(priv, RV3028_CTRL1, ++ RV3028_CTRL1_EERD, RV3028_CTRL1_EERD); ++ if (ret) ++ return ret; ++ ++ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status, ++ !(status & RV3028_STATUS_EEBUSY), ++ RV3028_EEBUSY_POLL, ++ RV3028_EEBUSY_TIMEOUT); ++ if (ret) ++ goto restore_eerd; ++ } ++ ++ for (i = 0; i < bytes; i++) { ++ ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i); ++ if (ret) ++ goto restore_eerd; ++ ++ ret = regmap_write(priv, RV3028_EEPROM_DATA, buf[i]); ++ if (ret) ++ goto restore_eerd; ++ ++ ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0); ++ if (ret) ++ goto restore_eerd; ++ ++ ret = regmap_write(priv, RV3028_EEPROM_CMD, ++ RV3028_EEPROM_CMD_WRITE); ++ if (ret) ++ goto restore_eerd; ++ ++ usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT); ++ ++ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status, ++ !(status & RV3028_STATUS_EEBUSY), ++ RV3028_EEBUSY_POLL, ++ RV3028_EEBUSY_TIMEOUT); ++ if (ret) ++ goto restore_eerd; ++ } ++ ++restore_eerd: ++ if (!(ctrl1 & RV3028_CTRL1_EERD)) ++ { ++ err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD, ++ 0); ++ if (err && !ret) ++ ret = err; ++ } ++ ++ return ret; ++} ++ ++static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val, ++ size_t bytes) ++{ ++ u32 status, ctrl1, data; ++ int i, ret, err; ++ u8 *buf = val; ++ ++ ret = regmap_read(priv, RV3028_CTRL1, &ctrl1); ++ if (ret) ++ return ret; ++ ++ if (!(ctrl1 & RV3028_CTRL1_EERD)) { ++ ret = regmap_update_bits(priv, RV3028_CTRL1, ++ RV3028_CTRL1_EERD, RV3028_CTRL1_EERD); ++ if (ret) ++ return ret; ++ ++ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status, ++ !(status & RV3028_STATUS_EEBUSY), ++ RV3028_EEBUSY_POLL, ++ RV3028_EEBUSY_TIMEOUT); ++ if (ret) ++ goto restore_eerd; ++ } ++ ++ for (i = 0; i < bytes; i++) { ++ ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i); ++ if (ret) ++ goto restore_eerd; ++ ++ ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0); ++ if (ret) ++ goto restore_eerd; ++ ++ ret = regmap_write(priv, RV3028_EEPROM_CMD, ++ RV3028_EEPROM_CMD_READ); ++ if (ret) ++ goto restore_eerd; ++ ++ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status, ++ !(status & RV3028_STATUS_EEBUSY), ++ RV3028_EEBUSY_POLL, ++ RV3028_EEBUSY_TIMEOUT); ++ if (ret) ++ goto restore_eerd; ++ ++ ret = regmap_read(priv, RV3028_EEPROM_DATA, &data); ++ if (ret) ++ goto restore_eerd; ++ buf[i] = data; ++ } ++ ++restore_eerd: ++ if (!(ctrl1 & RV3028_CTRL1_EERD)) ++ { ++ err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD, ++ 0); ++ if (err && !ret) ++ ret = err; ++ } ++ ++ return ret; ++} ++ ++static struct rtc_class_ops rv3028_rtc_ops = { ++ .read_time = rv3028_get_time, ++ .set_time = rv3028_set_time, ++ .read_offset = rv3028_read_offset, ++ .set_offset = rv3028_set_offset, ++ .ioctl = rv3028_ioctl, ++}; ++ ++static const struct regmap_config regmap_config = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ .max_register = 0x37, ++}; ++ ++static int rv3028_probe(struct i2c_client *client) ++{ ++ struct rv3028_data *rv3028; ++ int ret, status; ++ u32 ohms; ++ struct nvmem_config nvmem_cfg = { ++ .name = "rv3028_nvram", ++ .word_size = 1, ++ .stride = 1, ++ .size = 2, ++ .type = NVMEM_TYPE_BATTERY_BACKED, ++ .reg_read = rv3028_nvram_read, ++ .reg_write = rv3028_nvram_write, ++ }; ++ struct nvmem_config eeprom_cfg = { ++ .name = "rv3028_eeprom", ++ .word_size = 1, ++ .stride = 1, ++ .size = 43, ++ .type = NVMEM_TYPE_EEPROM, ++ .reg_read = rv3028_eeprom_read, ++ .reg_write = rv3028_eeprom_write, ++ }; ++ ++ rv3028 = devm_kzalloc(&client->dev, sizeof(struct rv3028_data), ++ GFP_KERNEL); ++ if (!rv3028) ++ return -ENOMEM; ++ ++ rv3028->regmap = devm_regmap_init_i2c(client, ®map_config); ++ ++ i2c_set_clientdata(client, rv3028); ++ ++ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); ++ if (ret < 0) ++ return ret; ++ ++ if (status & RV3028_STATUS_PORF) ++ dev_warn(&client->dev, "Voltage low, data loss detected.\n"); ++ ++ if (status & RV3028_STATUS_AF) ++ dev_warn(&client->dev, "An alarm may have been missed.\n"); ++ ++ rv3028->rtc = devm_rtc_allocate_device(&client->dev); ++ if (IS_ERR(rv3028->rtc)) { ++ return PTR_ERR(rv3028->rtc); ++ } ++ ++ if (client->irq > 0) { ++ ret = devm_request_threaded_irq(&client->dev, client->irq, ++ NULL, rv3028_handle_irq, ++ IRQF_TRIGGER_LOW | IRQF_ONESHOT, ++ "rv3028", rv3028); ++ if (ret) { ++ dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n"); ++ client->irq = 0; ++ } else { ++ rv3028_rtc_ops.read_alarm = rv3028_get_alarm; ++ rv3028_rtc_ops.set_alarm = rv3028_set_alarm; ++ rv3028_rtc_ops.alarm_irq_enable = rv3028_alarm_irq_enable; ++ } ++ } ++ ++ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1, ++ RV3028_CTRL1_WADA, RV3028_CTRL1_WADA); ++ if (ret) ++ return ret; ++ ++ /* setup timestamping */ ++ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ++ RV3028_CTRL2_EIE | RV3028_CTRL2_TSE, ++ RV3028_CTRL2_EIE | RV3028_CTRL2_TSE); ++ if (ret) ++ return ret; ++ ++ /* setup trickle charger */ ++ if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms", ++ &ohms)) { ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(rv3028_trickle_resistors); i++) ++ if (ohms == rv3028_trickle_resistors[i]) ++ break; ++ ++ if (i < ARRAY_SIZE(rv3028_trickle_resistors)) { ++ ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP, ++ RV3028_BACKUP_TCE | ++ RV3028_BACKUP_TCR_MASK, ++ RV3028_BACKUP_TCE | i); ++ if (ret) ++ return ret; ++ } else { ++ dev_warn(&client->dev, "invalid trickle resistor value\n"); ++ } ++ } ++ ++ ret = rtc_add_group(rv3028->rtc, &rv3028_attr_group); ++ if (ret) ++ return ret; ++ ++ rv3028->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; ++ rv3028->rtc->range_max = RTC_TIMESTAMP_END_2099; ++ rv3028->rtc->ops = &rv3028_rtc_ops; ++ ret = rtc_register_device(rv3028->rtc); ++ if (ret) ++ return ret; ++ ++ nvmem_cfg.priv = rv3028->regmap; ++ rtc_nvmem_register(rv3028->rtc, &nvmem_cfg); ++ eeprom_cfg.priv = rv3028->regmap; ++ rtc_nvmem_register(rv3028->rtc, &eeprom_cfg); ++ ++ rv3028->rtc->max_user_freq = 1; ++ ++ return 0; ++} ++ ++static const struct of_device_id rv3028_of_match[] = { ++ { .compatible = "microcrystal,rv3028", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, rv3028_of_match); ++ ++static struct i2c_driver rv3028_driver = { ++ .driver = { ++ .name = "rtc-rv3028", ++ .of_match_table = of_match_ptr(rv3028_of_match), ++ }, ++ .probe_new = rv3028_probe, ++}; ++module_i2c_driver(rv3028_driver); ++ ++MODULE_AUTHOR("Alexandre Belloni "); ++MODULE_DESCRIPTION("Micro Crystal RV3028 RTC driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.19/950-0354-staging-mmal-vchiq-If-the-VPU-returns-an-error-don-t.patch b/target/linux/brcm2708/patches-4.19/950-0354-staging-mmal-vchiq-If-the-VPU-returns-an-error-don-t.patch deleted file mode 100644 index 04157a816e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0354-staging-mmal-vchiq-If-the-VPU-returns-an-error-don-t.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 78c34cf60b9ae8bf8aa797c72d2f1abdc0a0bb9d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 13 Feb 2019 12:51:03 +0000 -Subject: [PATCH 354/806] staging: mmal-vchiq: If the VPU returns an error, - don't negate it - -There is an enum for the errors that the VPU can return. -port_parameter_get was negating that value, but also using -EINVAL -from the Linux error codes. -Pass the VPU error code as positive values. Should the function -need to pass a Linux failure, then return that as negative. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -1401,7 +1401,8 @@ static int port_parameter_get(struct vch - goto release_msg; - } - -- ret = -rmsg->u.port_parameter_get_reply.status; -+ ret = rmsg->u.port_parameter_get_reply.status; -+ - /* port_parameter_get_reply.size includes the header, - * whilst *value_size doesn't. - */ diff --git a/target/linux/brcm2708/patches-4.19/950-0355-overlays-Add-rv3028-to-i2c-rtc.patch b/target/linux/brcm2708/patches-4.19/950-0355-overlays-Add-rv3028-to-i2c-rtc.patch new file mode 100644 index 0000000000..22280224f1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0355-overlays-Add-rv3028-to-i2c-rtc.patch @@ -0,0 +1,75 @@ +From 67dd8e4c8ccf5d331960c7e936e5b03a9f92496d Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 28 Mar 2019 13:26:59 +0000 +Subject: [PATCH] overlays: Add rv3028 to i2c-rtc + +See: https://github.com/raspberrypi/linux/issues/2912 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 4 +++- + .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 19 ++++++++++++++++++- + 2 files changed, 21 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -939,6 +939,8 @@ Params: abx80x Select o + + pcf8563 Select the PCF8563 device + ++ rv3028 Select the Micro Crystal RV3028 device ++ + addr Sets the address for the RTC. Note that the + device must be configured to use the specified + address. +@@ -947,7 +949,7 @@ Params: abx80x Select o + "schottky" (ABx80x only) + + trickle-resistor-ohms Resistor value for trickle charge (DS1339, +- ABx80x) ++ ABx80x, RV3028) + + wakeup-source Specify that the RTC can be used as a wakeup + source +--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +@@ -158,6 +158,21 @@ + }; + }; + ++ fragment@10 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ rv3028: rv3028@52 { ++ compatible = "microcrystal,rv3028"; ++ reg = <0x52>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ + __overrides__ { + abx80x = <0>,"+0"; + ds1307 = <0>,"+1"; +@@ -169,6 +184,7 @@ + pcf8523 = <0>,"+7"; + pcf8563 = <0>,"+8"; + m41t62 = <0>,"+9"; ++ rv3028 = <0>,"+10"; + + addr = <&abx80x>, "reg:0", + <&ds1307>, "reg:0", +@@ -182,7 +198,8 @@ + <&m41t62>, "reg:0"; + trickle-diode-type = <&abx80x>,"abracon,tc-diode"; + trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", +- <&abx80x>,"abracon,tc-resistor"; ++ <&abx80x>,"abracon,tc-resistor", ++ <&rv3028>,"trickle-resistor-ohms:0"; + wakeup-source = <&ds1339>,"wakeup-source?", + <&ds3231>,"wakeup-source?", + <&mcp7940x>,"wakeup-source?", diff --git a/target/linux/brcm2708/patches-4.19/950-0355-staging-bcm2835_codec-Query-supported-formats-from-t.patch b/target/linux/brcm2708/patches-4.19/950-0355-staging-bcm2835_codec-Query-supported-formats-from-t.patch deleted file mode 100644 index cee550272c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0355-staging-bcm2835_codec-Query-supported-formats-from-t.patch +++ /dev/null @@ -1,727 +0,0 @@ -From ce8cc7a85839af588b753ce4af0832db9c467f45 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 13 Feb 2019 13:44:00 +0000 -Subject: [PATCH 355/806] staging: bcm2835_codec: Query supported formats from - the component - -The driver was previously working with hard coded tables of -which video formats were supported by each component. -The components advertise this information via a MMAL parameter, -so retrieve the information from there during probe, and store -in the state structure for that device. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 455 +++++++++++++----- - 1 file changed, 327 insertions(+), 128 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -88,17 +88,12 @@ struct bcm2835_codec_fmt { - int bytesperline_align; - u32 flags; - u32 mmal_fmt; -- bool decode_only; -- bool encode_only; - int size_multiplier_x2; - }; - --/* Supported raw pixel formats. Those supported for both encode and decode -- * must come first, with those only supported for decode coming after (there -- * are no formats supported for encode only). -- */ --static struct bcm2835_codec_fmt raw_formats[] = { -+static const struct bcm2835_codec_fmt supported_formats[] = { - { -+ /* YUV formats */ - .fourcc = V4L2_PIX_FMT_YUV420, - .depth = 8, - .bytesperline_align = 32, -@@ -139,7 +134,6 @@ static struct bcm2835_codec_fmt raw_form - .bytesperline_align = 32, - .flags = 0, - .mmal_fmt = MMAL_ENCODING_YUYV, -- .encode_only = true, - .size_multiplier_x2 = 2, - }, { - .fourcc = V4L2_PIX_FMT_UYVY, -@@ -147,7 +141,6 @@ static struct bcm2835_codec_fmt raw_form - .bytesperline_align = 32, - .flags = 0, - .mmal_fmt = MMAL_ENCODING_UYVY, -- .encode_only = true, - .size_multiplier_x2 = 2, - }, { - .fourcc = V4L2_PIX_FMT_YVYU, -@@ -155,7 +148,6 @@ static struct bcm2835_codec_fmt raw_form - .bytesperline_align = 32, - .flags = 0, - .mmal_fmt = MMAL_ENCODING_YVYU, -- .encode_only = true, - .size_multiplier_x2 = 2, - }, { - .fourcc = V4L2_PIX_FMT_VYUY, -@@ -163,15 +155,14 @@ static struct bcm2835_codec_fmt raw_form - .bytesperline_align = 32, - .flags = 0, - .mmal_fmt = MMAL_ENCODING_VYUY, -- .encode_only = true, - .size_multiplier_x2 = 2, - }, { -+ /* RGB formats */ - .fourcc = V4L2_PIX_FMT_RGB24, - .depth = 24, - .bytesperline_align = 32, - .flags = 0, - .mmal_fmt = MMAL_ENCODING_RGB24, -- .encode_only = true, - .size_multiplier_x2 = 2, - }, { - .fourcc = V4L2_PIX_FMT_BGR24, -@@ -179,7 +170,6 @@ static struct bcm2835_codec_fmt raw_form - .bytesperline_align = 32, - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BGR24, -- .encode_only = true, - .size_multiplier_x2 = 2, - }, { - .fourcc = V4L2_PIX_FMT_BGR32, -@@ -187,17 +177,126 @@ static struct bcm2835_codec_fmt raw_form - .bytesperline_align = 32, - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BGRA, -- .encode_only = true, - .size_multiplier_x2 = 2, -- }, --}; -- --/* Supported encoded formats. Those supported for both encode and decode -- * must come first, with those only supported for decode coming after (there -- * are no formats supported for encode only). -- */ --static struct bcm2835_codec_fmt encoded_formats[] = { -- { -+ }, { -+ /* Bayer formats */ -+ /* 8 bit */ -+ .fourcc = V4L2_PIX_FMT_SRGGB8, -+ .depth = 8, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB8, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SBGGR8, -+ .depth = 8, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR8, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGRBG8, -+ .depth = 8, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG8, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGBRG8, -+ .depth = 8, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG8, -+ .size_multiplier_x2 = 2, -+ }, { -+ /* 10 bit */ -+ .fourcc = V4L2_PIX_FMT_SRGGB10P, -+ .depth = 10, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB10P, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SBGGR10P, -+ .depth = 10, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR10P, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGRBG10P, -+ .depth = 10, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG10P, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGBRG10P, -+ .depth = 10, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG10P, -+ .size_multiplier_x2 = 2, -+ }, { -+ /* 12 bit */ -+ .fourcc = V4L2_PIX_FMT_SRGGB12P, -+ .depth = 12, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB12P, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SBGGR12P, -+ .depth = 12, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR12P, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGRBG12P, -+ .depth = 12, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG12P, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGBRG12P, -+ .depth = 12, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG12P, -+ .size_multiplier_x2 = 2, -+ }, { -+ /* 16 bit */ -+ .fourcc = V4L2_PIX_FMT_SRGGB16, -+ .depth = 16, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB16, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SBGGR16, -+ .depth = 16, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR16, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGRBG16, -+ .depth = 16, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG16, -+ .size_multiplier_x2 = 2, -+ }, { -+ .fourcc = V4L2_PIX_FMT_SGBRG16, -+ .depth = 16, -+ .bytesperline_align = 32, -+ .flags = 0, -+ .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG16, -+ .size_multiplier_x2 = 2, -+ }, { -+ /* Compressed formats */ - .fourcc = V4L2_PIX_FMT_H264, - .depth = 0, - .flags = V4L2_FMT_FLAG_COMPRESSED, -@@ -212,30 +311,22 @@ static struct bcm2835_codec_fmt encoded_ - .depth = 0, - .flags = V4L2_FMT_FLAG_COMPRESSED, - .mmal_fmt = MMAL_ENCODING_MP4V, -- .decode_only = true, - }, { - .fourcc = V4L2_PIX_FMT_H263, - .depth = 0, - .flags = V4L2_FMT_FLAG_COMPRESSED, - .mmal_fmt = MMAL_ENCODING_H263, -- .decode_only = true, - }, { - .fourcc = V4L2_PIX_FMT_MPEG2, - .depth = 0, - .flags = V4L2_FMT_FLAG_COMPRESSED, - .mmal_fmt = MMAL_ENCODING_MP2V, -- .decode_only = true, - }, { - .fourcc = V4L2_PIX_FMT_VP8, - .depth = 0, - .flags = V4L2_FMT_FLAG_COMPRESSED, - .mmal_fmt = MMAL_ENCODING_VP8, -- .decode_only = true, - }, -- /* -- * This list couold include VP6 and Theorafor decode, but V4L2 doesn't -- * support them. -- */ - }; - - struct bcm2835_codec_fmt_list { -@@ -243,19 +334,6 @@ struct bcm2835_codec_fmt_list { - unsigned int num_entries; - }; - --#define RAW_LIST 0 --#define ENCODED_LIST 1 -- --struct bcm2835_codec_fmt_list formats[] = { -- { -- .list = raw_formats, -- .num_entries = ARRAY_SIZE(raw_formats), -- }, { -- .list = encoded_formats, -- .num_entries = ARRAY_SIZE(encoded_formats), -- }, --}; -- - struct m2m_mmal_buffer { - struct v4l2_m2m_buffer m2m; - struct mmal_buffer mmal; -@@ -284,52 +362,6 @@ struct bcm2835_codec_q_data { - bool eos_buffer_in_use; /* debug only */ - }; - --enum { -- V4L2_M2M_SRC = 0, -- V4L2_M2M_DST = 1, --}; -- --static inline struct bcm2835_codec_fmt_list *get_format_list(bool decode, -- bool capture) --{ -- return decode ^ capture ? &formats[ENCODED_LIST] : &formats[RAW_LIST]; --} -- --static struct bcm2835_codec_fmt *get_default_format(bool decode, bool capture) --{ -- return &get_format_list(decode, capture)->list[0]; --} -- --static struct bcm2835_codec_fmt *find_format(struct v4l2_format *f, bool decode, -- bool capture) --{ -- struct bcm2835_codec_fmt *fmt; -- unsigned int k; -- struct bcm2835_codec_fmt_list *fmts = get_format_list(decode, capture); -- -- for (k = 0; k < fmts->num_entries; k++) { -- fmt = &fmts->list[k]; -- if (fmt->fourcc == f->fmt.pix.pixelformat) -- break; -- } -- -- /* -- * Some compressed formats are only supported for decoding, not -- * encoding. -- */ -- if (!decode && fmts->list[k].decode_only) -- return NULL; -- -- /* Some pixel formats are only supported for encoding, not decoding. */ -- if (decode && fmts->list[k].encode_only) -- return NULL; -- -- if (k == fmts->num_entries) -- return NULL; -- -- return &fmts->list[k]; --} -- - struct bcm2835_codec_dev { - struct platform_device *pdev; - -@@ -342,6 +374,9 @@ struct bcm2835_codec_dev { - - /* allocated mmal instance and components */ - bool decode; /* Is this instance a decoder? */ -+ /* The list of formats supported on input and output queues. */ -+ struct bcm2835_codec_fmt_list supported_fmts[2]; -+ - struct vchiq_mmal_instance *instance; - - struct v4l2_m2m_dev *m2m_dev; -@@ -374,8 +409,59 @@ struct bcm2835_codec_ctx { - struct bcm2835_codec_driver { - struct bcm2835_codec_dev *encode; - struct bcm2835_codec_dev *decode; -+ struct bcm2835_codec_dev *isp; -+}; -+ -+enum { -+ V4L2_M2M_SRC = 0, -+ V4L2_M2M_DST = 1, - }; - -+static const struct bcm2835_codec_fmt *get_fmt(u32 mmal_fmt) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < ARRAY_SIZE(supported_formats); i++) { -+ if (supported_formats[i].mmal_fmt == mmal_fmt) -+ return &supported_formats[i]; -+ } -+ return NULL; -+} -+ -+static inline -+struct bcm2835_codec_fmt_list *get_format_list(struct bcm2835_codec_dev *dev, -+ bool capture) -+{ -+ return &dev->supported_fmts[capture ? 1 : 0]; -+} -+ -+static -+struct bcm2835_codec_fmt *get_default_format(struct bcm2835_codec_dev *dev, -+ bool capture) -+{ -+ return &dev->supported_fmts[capture ? 1 : 0].list[0]; -+} -+ -+static struct bcm2835_codec_fmt *find_format(struct v4l2_format *f, -+ struct bcm2835_codec_dev *dev, -+ bool capture) -+{ -+ struct bcm2835_codec_fmt *fmt; -+ unsigned int k; -+ struct bcm2835_codec_fmt_list *fmts = -+ &dev->supported_fmts[capture ? 1 : 0]; -+ -+ for (k = 0; k < fmts->num_entries; k++) { -+ fmt = &fmts->list[k]; -+ if (fmt->fourcc == f->fmt.pix.pixelformat) -+ break; -+ } -+ if (k == fmts->num_entries) -+ return NULL; -+ -+ return &fmts->list[k]; -+} -+ - static inline struct bcm2835_codec_ctx *file2ctx(struct file *file) - { - return container_of(file->private_data, struct bcm2835_codec_ctx, fh); -@@ -456,7 +542,6 @@ static inline unsigned int get_bytesperl - } - - static void setup_mmal_port_format(struct bcm2835_codec_ctx *ctx, -- bool decode, - struct bcm2835_codec_q_data *q_data, - struct vchiq_mmal_port *port) - { -@@ -473,7 +558,7 @@ static void setup_mmal_port_format(struc - port->es.video.frame_rate.den = 1; - } else { - /* Compressed format - leave resolution as 0 for decode */ -- if (decode) { -+ if (ctx->dev->decode) { - port->es.video.width = 0; - port->es.video.height = 0; - port->es.video.crop.width = 0; -@@ -802,22 +887,15 @@ static int vidioc_querycap(struct file * - return 0; - } - --static int enum_fmt(struct v4l2_fmtdesc *f, bool decode, bool capture) -+static int enum_fmt(struct v4l2_fmtdesc *f, struct bcm2835_codec_ctx *ctx, -+ bool capture) - { - struct bcm2835_codec_fmt *fmt; -- struct bcm2835_codec_fmt_list *fmts = get_format_list(decode, capture); -+ struct bcm2835_codec_fmt_list *fmts = -+ get_format_list(ctx->dev, capture); - - if (f->index < fmts->num_entries) { - /* Format found */ -- /* Check format isn't a decode only format when encoding */ -- if (!decode && -- fmts->list[f->index].decode_only) -- return -EINVAL; -- /* Check format isn't a decode only format when encoding */ -- if (decode && -- fmts->list[f->index].encode_only) -- return -EINVAL; -- - fmt = &fmts->list[f->index]; - f->pixelformat = fmt->fourcc; - f->flags = fmt->flags; -@@ -833,7 +911,7 @@ static int vidioc_enum_fmt_vid_cap(struc - { - struct bcm2835_codec_ctx *ctx = file2ctx(file); - -- return enum_fmt(f, ctx->dev->decode, true); -+ return enum_fmt(f, ctx, true); - } - - static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, -@@ -841,7 +919,7 @@ static int vidioc_enum_fmt_vid_out(struc - { - struct bcm2835_codec_ctx *ctx = file2ctx(file); - -- return enum_fmt(f, ctx->dev->decode, false); -+ return enum_fmt(f, ctx, false); - } - - static int vidioc_g_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f) -@@ -933,11 +1011,11 @@ static int vidioc_try_fmt_vid_cap(struct - struct bcm2835_codec_fmt *fmt; - struct bcm2835_codec_ctx *ctx = file2ctx(file); - -- fmt = find_format(f, ctx->dev->decode, true); -+ fmt = find_format(f, ctx->dev, true); - if (!fmt) { -- f->fmt.pix.pixelformat = get_default_format(ctx->dev->decode, -+ f->fmt.pix.pixelformat = get_default_format(ctx->dev, - true)->fourcc; -- fmt = find_format(f, ctx->dev->decode, true); -+ fmt = find_format(f, ctx->dev, true); - } - - return vidioc_try_fmt(f, fmt); -@@ -949,11 +1027,11 @@ static int vidioc_try_fmt_vid_out(struct - struct bcm2835_codec_fmt *fmt; - struct bcm2835_codec_ctx *ctx = file2ctx(file); - -- fmt = find_format(f, ctx->dev->decode, false); -+ fmt = find_format(f, ctx->dev, false); - if (!fmt) { -- f->fmt.pix.pixelformat = get_default_format(ctx->dev->decode, -+ f->fmt.pix.pixelformat = get_default_format(ctx->dev, - false)->fourcc; -- fmt = find_format(f, ctx->dev->decode, false); -+ fmt = find_format(f, ctx->dev, false); - } - - if (!f->fmt.pix.colorspace) -@@ -988,7 +1066,7 @@ static int vidioc_s_fmt(struct bcm2835_c - return -EBUSY; - } - -- q_data->fmt = find_format(f, ctx->dev->decode, -+ q_data->fmt = find_format(f, ctx->dev, - f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE); - q_data->crop_width = f->fmt.pix.width; - q_data->height = f->fmt.pix.height; -@@ -1041,7 +1119,7 @@ static int vidioc_s_fmt(struct bcm2835_c - if (!port) - return 0; - -- setup_mmal_port_format(ctx, ctx->dev->decode, q_data, port); -+ setup_mmal_port_format(ctx, q_data, port); - ret = vchiq_mmal_port_set_format(ctx->dev->instance, port); - if (ret) { - v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed vchiq_mmal_port_set_format on port, ret %d\n", -@@ -1064,8 +1142,7 @@ static int vidioc_s_fmt(struct bcm2835_c - struct bcm2835_codec_q_data *q_data_dst = - &ctx->q_data[V4L2_M2M_DST]; - -- setup_mmal_port_format(ctx, ctx->dev->decode, q_data_dst, -- port_dst); -+ setup_mmal_port_format(ctx, q_data_dst, port_dst); - ret = vchiq_mmal_port_set_format(ctx->dev->instance, port_dst); - if (ret) { - v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed vchiq_mmal_port_set_format on output port, ret %d\n", -@@ -1636,10 +1713,10 @@ static int bcm2835_codec_create_componen - MMAL_PARAMETER_ZERO_COPY, &enable, - sizeof(enable)); - -- setup_mmal_port_format(ctx, dev->decode, &ctx->q_data[V4L2_M2M_SRC], -+ setup_mmal_port_format(ctx, &ctx->q_data[V4L2_M2M_SRC], - &ctx->component->input[0]); - -- setup_mmal_port_format(ctx, dev->decode, &ctx->q_data[V4L2_M2M_DST], -+ setup_mmal_port_format(ctx, &ctx->q_data[V4L2_M2M_DST], - &ctx->component->output[0]); - - ret = vchiq_mmal_port_set_format(dev->instance, -@@ -2025,8 +2102,8 @@ static int bcm2835_codec_open(struct fil - goto open_unlock; - } - -- ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev->decode, false); -- ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev->decode, true); -+ ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev, false); -+ ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev, true); - if (dev->decode) { - /* - * Input width and height are irrelevant as they will be defined -@@ -2209,13 +2286,130 @@ static const struct v4l2_m2m_ops m2m_ops - .job_abort = job_abort, - }; - -+/* Size of the array to provide to the VPU when asking for the list of supported -+ * formats. -+ * The ISP component currently advertises 33 input formats, so add a small -+ * overhead on that. -+ */ -+#define MAX_SUPPORTED_ENCODINGS 40 -+ -+/* Populate dev->supported_fmts with the formats supported by those ports. */ -+static int bcm2835_codec_get_supported_fmts(struct bcm2835_codec_dev *dev) -+{ -+ struct bcm2835_codec_fmt *list; -+ struct vchiq_mmal_component *component; -+ u32 fourccs[MAX_SUPPORTED_ENCODINGS]; -+ u32 param_size = sizeof(fourccs); -+ unsigned int i, j, num_encodings; -+ int ret; -+ -+ ret = vchiq_mmal_component_init(dev->instance, -+ dev->decode ? -+ "ril.video_decode" : -+ "ril.video_encode", -+ &component); -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, "%s: failed to create component\n", -+ __func__); -+ return -ENOMEM; -+ } -+ -+ ret = vchiq_mmal_port_parameter_get(dev->instance, -+ &component->input[0], -+ MMAL_PARAMETER_SUPPORTED_ENCODINGS, -+ &fourccs, -+ ¶m_size); -+ -+ if (ret) { -+ if (ret == MMAL_MSG_STATUS_ENOSPC) { -+ v4l2_err(&dev->v4l2_dev, "%s: port has more encoding than we provided space for. Some are dropped.\n", -+ __func__); -+ num_encodings = MAX_SUPPORTED_ENCODINGS; -+ } else { -+ v4l2_err(&dev->v4l2_dev, "%s: get_param ret %u.\n", -+ __func__, ret); -+ ret = -EINVAL; -+ goto destroy_component; -+ } -+ } else { -+ num_encodings = param_size / sizeof(u32); -+ } -+ -+ /* Assume at this stage that all encodings will be supported in V4L2. -+ * Any that aren't supported will waste a very small amount of memory. -+ */ -+ list = devm_kzalloc(&dev->pdev->dev, -+ sizeof(struct bcm2835_codec_fmt) * num_encodings, -+ GFP_KERNEL); -+ if (!list) { -+ ret = -ENOMEM; -+ goto destroy_component; -+ } -+ dev->supported_fmts[0].list = list; -+ -+ for (i = 0, j = 0; i < num_encodings; i++) { -+ const struct bcm2835_codec_fmt *fmt = get_fmt(fourccs[i]); -+ -+ if (fmt) { -+ list[j] = *fmt; -+ j++; -+ } -+ } -+ dev->supported_fmts[0].num_entries = j; -+ -+ param_size = sizeof(fourccs); -+ ret = vchiq_mmal_port_parameter_get(dev->instance, -+ &component->output[0], -+ MMAL_PARAMETER_SUPPORTED_ENCODINGS, -+ &fourccs, -+ ¶m_size); -+ -+ if (ret) { -+ if (ret == MMAL_MSG_STATUS_ENOSPC) { -+ v4l2_err(&dev->v4l2_dev, "%s: port has more encoding than we provided space for. Some are dropped.\n", -+ __func__); -+ num_encodings = MAX_SUPPORTED_ENCODINGS; -+ } else { -+ ret = -EINVAL; -+ goto destroy_component; -+ } -+ } else { -+ num_encodings = param_size / sizeof(u32); -+ } -+ /* Assume at this stage that all encodings will be supported in V4L2. */ -+ list = devm_kzalloc(&dev->pdev->dev, -+ sizeof(struct bcm2835_codec_fmt) * num_encodings, -+ GFP_KERNEL); -+ if (!list) { -+ ret = -ENOMEM; -+ goto destroy_component; -+ } -+ dev->supported_fmts[1].list = list; -+ -+ for (i = 0, j = 0; i < num_encodings; i++) { -+ const struct bcm2835_codec_fmt *fmt = get_fmt(fourccs[i]); -+ -+ if (fmt) { -+ list[j] = *fmt; -+ j++; -+ } -+ } -+ dev->supported_fmts[1].num_entries = j; -+ -+ ret = 0; -+ -+destroy_component: -+ vchiq_mmal_component_finalise(dev->instance, component); -+ -+ return ret; -+} -+ - static int bcm2835_codec_create(struct platform_device *pdev, - struct bcm2835_codec_dev **new_dev, - bool decode) - { - struct bcm2835_codec_dev *dev; - struct video_device *vfd; -- struct vchiq_mmal_instance *instance = NULL; - int video_nr; - int ret; - -@@ -2227,10 +2421,18 @@ static int bcm2835_codec_create(struct p - - dev->decode = decode; - -- ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); -+ ret = vchiq_mmal_init(&dev->instance); - if (ret) - return ret; - -+ ret = bcm2835_codec_get_supported_fmts(dev); -+ if (ret) -+ goto vchiq_finalise; -+ -+ ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); -+ if (ret) -+ goto vchiq_finalise; -+ - atomic_set(&dev->num_inst, 0); - mutex_init(&dev->dev_mutex); - -@@ -2270,12 +2472,7 @@ static int bcm2835_codec_create(struct p - goto err_m2m; - } - -- ret = vchiq_mmal_init(&instance); -- if (ret < 0) -- goto err_m2m; -- dev->instance = instance; -- -- v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s codec\n", -+ v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s\n", - dev->decode ? "decode" : "encode"); - return 0; - -@@ -2284,7 +2481,8 @@ err_m2m: - video_unregister_device(&dev->vfd); - unreg_dev: - v4l2_device_unregister(&dev->v4l2_dev); -- -+vchiq_finalise: -+ vchiq_mmal_finalise(dev->instance); - return ret; - } - -@@ -2297,6 +2495,7 @@ static int bcm2835_codec_destroy(struct - v4l2_m2m_release(dev->m2m_dev); - video_unregister_device(&dev->vfd); - v4l2_device_unregister(&dev->v4l2_dev); -+ vchiq_mmal_finalise(dev->instance); - - return 0; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0356-ASoC-tlv320aic32x4-SND_SOC_DAPM_MICBIAS-is-deprecate.patch b/target/linux/brcm2708/patches-4.19/950-0356-ASoC-tlv320aic32x4-SND_SOC_DAPM_MICBIAS-is-deprecate.patch new file mode 100644 index 0000000000..aa5f12a5ca --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0356-ASoC-tlv320aic32x4-SND_SOC_DAPM_MICBIAS-is-deprecate.patch @@ -0,0 +1,78 @@ +From 053938f67f73773152f70d89aa32e7893ee19694 Mon Sep 17 00:00:00 2001 +From: b-ak +Date: Wed, 9 Jan 2019 22:41:21 +0530 +Subject: [PATCH] ASoC: tlv320aic32x4: SND_SOC_DAPM_MICBIAS is + deprecated + +commit 04d979d7a7bac2f645cd827ea37e5ffa5b4e1f97 upstream. + +SND_SOC_DAPM_MICBIAS is deprecated, replace it with SND_SOC_DAPM_SUPPLY. + +MICBIAS voltage wasn't supplied to the microphone with the older +SND_SOC_DAPM_MICBIAS widget, hence the microphone wouldn't work. + +This patch fixes the problem. + +Signed-off-by: b-ak +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 30 +++++++++++++++++++++++++++++- + sound/soc/codecs/tlv320aic32x4.h | 1 + + 2 files changed, 30 insertions(+), 1 deletion(-) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -79,6 +79,32 @@ struct aic32x4_priv { + struct device *dev; + }; + ++static int mic_bias_event(struct snd_soc_dapm_widget *w, ++ struct snd_kcontrol *kcontrol, int event) ++{ ++ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); ++ ++ switch (event) { ++ case SND_SOC_DAPM_POST_PMU: ++ /* Change Mic Bias Registor */ ++ snd_soc_component_update_bits(component, AIC32X4_MICBIAS, ++ AIC32x4_MICBIAS_MASK, ++ AIC32X4_MICBIAS_LDOIN | ++ AIC32X4_MICBIAS_2075V); ++ printk(KERN_DEBUG "%s: Mic Bias will be turned ON\n", __func__); ++ break; ++ case SND_SOC_DAPM_PRE_PMD: ++ snd_soc_component_update_bits(component, AIC32X4_MICBIAS, ++ AIC32x4_MICBIAS_MASK, 0); ++ printk(KERN_DEBUG "%s: Mic Bias will be turned OFF\n", ++ __func__); ++ break; ++ } ++ ++ return 0; ++} ++ ++ + static int aic32x4_get_mfp1_gpio(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) + { +@@ -450,7 +476,9 @@ static const struct snd_soc_dapm_widget + SND_SOC_DAPM_MUX("IN3_R to Left Mixer Negative Resistor", SND_SOC_NOPM, 0, 0, + in3r_to_lmixer_controls), + +- SND_SOC_DAPM_MICBIAS("Mic Bias", AIC32X4_MICBIAS, 6, 0), ++ SND_SOC_DAPM_SUPPLY("Mic Bias", AIC32X4_MICBIAS, 6, 0, mic_bias_event, ++ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), ++ + + SND_SOC_DAPM_OUTPUT("HPL"), + SND_SOC_DAPM_OUTPUT("HPR"), +--- a/sound/soc/codecs/tlv320aic32x4.h ++++ b/sound/soc/codecs/tlv320aic32x4.h +@@ -195,6 +195,7 @@ int aic32x4_remove(struct device *dev); + /* AIC32X4_MICBIAS */ + #define AIC32X4_MICBIAS_LDOIN BIT(3) + #define AIC32X4_MICBIAS_2075V 0x60 ++#define AIC32x4_MICBIAS_MASK GENMASK(6, 3) + + /* AIC32X4_LMICPGANIN */ + #define AIC32X4_LMICPGANIN_IN2R_10K 0x10 diff --git a/target/linux/brcm2708/patches-4.19/950-0356-staging-bcm2835_codec-Add-support-for-the-ISP-as-an-.patch b/target/linux/brcm2708/patches-4.19/950-0356-staging-bcm2835_codec-Add-support-for-the-ISP-as-an-.patch deleted file mode 100644 index 30d99a0343..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0356-staging-bcm2835_codec-Add-support-for-the-ISP-as-an-.patch +++ /dev/null @@ -1,384 +0,0 @@ -From 7afce6566802bcaa468f92b9e06da8b899161128 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 13 Feb 2019 14:07:52 +0000 -Subject: [PATCH 356/806] staging: bcm2835_codec: Add support for the ISP as an - M2M device - -The MMAL ISP component can also use this same V4L2 wrapper to -provide a M2M format conversion and resizer. -Instantiate 3 V4L2 devices now, one for each of decode, encode, -and isp. -The ISP currently doesn't expose any controls via V4L2, but this -can be extended in the future. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 132 ++++++++++++------ - 1 file changed, 92 insertions(+), 40 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -54,10 +54,26 @@ static int encode_video_nr = 11; - module_param(encode_video_nr, int, 0644); - MODULE_PARM_DESC(encode_video_nr, "encoder video device number"); - -+static int isp_video_nr = 12; -+module_param(isp_video_nr, int, 0644); -+MODULE_PARM_DESC(isp_video_nr, "isp video device number"); -+ - static unsigned int debug; - module_param(debug, uint, 0644); - MODULE_PARM_DESC(debug, "activates debug info (0-3)"); - -+enum bcm2835_codec_role { -+ DECODE, -+ ENCODE, -+ ISP, -+}; -+ -+static const char * const components[] = { -+ "ril.video_decode", -+ "ril.video_encode", -+ "ril.isp", -+}; -+ - #define MIN_W 32 - #define MIN_H 32 - #define MAX_W 1920 -@@ -373,7 +389,7 @@ struct bcm2835_codec_dev { - atomic_t num_inst; - - /* allocated mmal instance and components */ -- bool decode; /* Is this instance a decoder? */ -+ enum bcm2835_codec_role role; - /* The list of formats supported on input and output queues. */ - struct bcm2835_codec_fmt_list supported_fmts[2]; - -@@ -558,7 +574,7 @@ static void setup_mmal_port_format(struc - port->es.video.frame_rate.den = 1; - } else { - /* Compressed format - leave resolution as 0 for decode */ -- if (ctx->dev->decode) { -+ if (ctx->dev->role == DECODE) { - port->es.video.width = 0; - port->es.video.height = 0; - port->es.video.crop.width = 0; -@@ -1089,7 +1105,8 @@ static int vidioc_s_fmt(struct bcm2835_c - v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Calulated bpl as %u, size %u\n", - q_data->bytesperline, q_data->sizeimage); - -- if (ctx->dev->decode && q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED && -+ if (ctx->dev->role == DECODE && -+ q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED && - f->fmt.pix.width && f->fmt.pix.height) { - /* - * On the decoder, if provided with a resolution on the input -@@ -1188,7 +1205,8 @@ static int vidioc_g_selection(struct fil - bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? - true : false; - -- if (capture_queue ^ ctx->dev->decode) -+ if ((ctx->dev->role == DECODE && !capture_queue) || -+ (ctx->dev->role == ENCODE && capture_queue)) - /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ - return -EINVAL; - -@@ -1196,7 +1214,8 @@ static int vidioc_g_selection(struct fil - if (!q_data) - return -EINVAL; - -- if (ctx->dev->decode) { -+ switch (ctx->dev->role) { -+ case DECODE: - switch (s->target) { - case V4L2_SEL_TGT_COMPOSE_DEFAULT: - case V4L2_SEL_TGT_COMPOSE: -@@ -1214,7 +1233,8 @@ static int vidioc_g_selection(struct fil - default: - return -EINVAL; - } -- } else { -+ break; -+ case ENCODE: - switch (s->target) { - case V4L2_SEL_TGT_CROP_DEFAULT: - case V4L2_SEL_TGT_CROP_BOUNDS: -@@ -1232,6 +1252,9 @@ static int vidioc_g_selection(struct fil - default: - return -EINVAL; - } -+ break; -+ case ISP: -+ break; - } - - return 0; -@@ -1249,7 +1272,8 @@ static int vidioc_s_selection(struct fil - __func__, ctx, s->type, q_data, s->target, s->r.left, s->r.top, - s->r.width, s->r.height); - -- if (capture_queue ^ ctx->dev->decode) -+ if ((ctx->dev->role == DECODE && !capture_queue) || -+ (ctx->dev->role == ENCODE && capture_queue)) - /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ - return -EINVAL; - -@@ -1257,7 +1281,8 @@ static int vidioc_s_selection(struct fil - if (!q_data) - return -EINVAL; - -- if (ctx->dev->decode) { -+ switch (ctx->dev->role) { -+ case DECODE: - switch (s->target) { - case V4L2_SEL_TGT_COMPOSE: - /* Accept cropped image */ -@@ -1272,7 +1297,8 @@ static int vidioc_s_selection(struct fil - default: - return -EINVAL; - } -- } else { -+ break; -+ case ENCODE: - switch (s->target) { - case V4L2_SEL_TGT_CROP: - /* Only support crop from (0,0) */ -@@ -1287,6 +1313,9 @@ static int vidioc_s_selection(struct fil - default: - return -EINVAL; - } -+ break; -+ case ISP: -+ break; - } - - return 0; -@@ -1490,7 +1519,7 @@ static int vidioc_try_decoder_cmd(struct - { - struct bcm2835_codec_ctx *ctx = file2ctx(file); - -- if (!ctx->dev->decode) -+ if (ctx->dev->role != DECODE) - return -EINVAL; - - switch (cmd->cmd) { -@@ -1564,7 +1593,7 @@ static int vidioc_try_encoder_cmd(struct - { - struct bcm2835_codec_ctx *ctx = file2ctx(file); - -- if (ctx->dev->decode) -+ if (ctx->dev->role != ENCODE) - return -EINVAL; - - switch (cmd->cmd) { -@@ -1697,12 +1726,11 @@ static int bcm2835_codec_create_componen - unsigned int enable = 1; - int ret; - -- ret = vchiq_mmal_component_init(dev->instance, dev->decode ? -- "ril.video_decode" : "ril.video_encode", -+ ret = vchiq_mmal_component_init(dev->instance, components[dev->role], - &ctx->component); - if (ret < 0) { -- v4l2_err(&dev->v4l2_dev, "%s: failed to create component for %s\n", -- __func__, dev->decode ? "decode" : "encode"); -+ v4l2_err(&dev->v4l2_dev, "%s: failed to create component %s\n", -+ __func__, components[dev->role]); - return -ENOMEM; - } - -@@ -1729,13 +1757,7 @@ static int bcm2835_codec_create_componen - if (ret < 0) - goto destroy_component; - -- if (dev->decode) { -- if (ctx->q_data[V4L2_M2M_DST].sizeimage < -- ctx->component->output[0].minimum_buffer.size) -- v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", -- ctx->q_data[V4L2_M2M_DST].sizeimage, -- ctx->component->output[0].minimum_buffer.size); -- } else { -+ if (dev->role == ENCODE) { - if (ctx->q_data[V4L2_M2M_SRC].sizeimage < - ctx->component->output[0].minimum_buffer.size) - v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", -@@ -1744,6 +1766,12 @@ static int bcm2835_codec_create_componen - - /* Now we have a component we can set all the ctrls */ - bcm2835_codec_set_ctrls(ctx); -+ } else { -+ if (ctx->q_data[V4L2_M2M_DST].sizeimage < -+ ctx->component->output[0].minimum_buffer.size) -+ v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", -+ ctx->q_data[V4L2_M2M_DST].sizeimage, -+ ctx->component->output[0].minimum_buffer.size); - } - - return 0; -@@ -2090,8 +2118,6 @@ static int bcm2835_codec_open(struct fil - struct v4l2_ctrl_handler *hdl; - int rc = 0; - -- v4l2_dbg(1, debug, &dev->v4l2_dev, "Creating instance for %s\n", -- dev->decode ? "decode" : "encode"); - if (mutex_lock_interruptible(&dev->dev_mutex)) { - v4l2_err(&dev->v4l2_dev, "Mutex fail\n"); - return -ERESTARTSYS; -@@ -2104,7 +2130,8 @@ static int bcm2835_codec_open(struct fil - - ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev, false); - ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev, true); -- if (dev->decode) { -+ switch (dev->role) { -+ case DECODE: - /* - * Input width and height are irrelevant as they will be defined - * by the bitstream not the format. Required by V4L2 though. -@@ -2126,7 +2153,8 @@ static int bcm2835_codec_open(struct fil - get_sizeimage(ctx->q_data[V4L2_M2M_DST].bytesperline, - ctx->q_data[V4L2_M2M_DST].height, - ctx->q_data[V4L2_M2M_DST].fmt); -- } else { -+ break; -+ case ENCODE: - ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; - ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; - ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; -@@ -2144,6 +2172,9 @@ static int bcm2835_codec_open(struct fil - ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; - ctx->q_data[V4L2_M2M_DST].sizeimage = - DEF_COMP_BUF_SIZE_720P_OR_LESS; -+ break; -+ case ISP: -+ break; - } - - ctx->colorspace = V4L2_COLORSPACE_REC709; -@@ -2154,7 +2185,7 @@ static int bcm2835_codec_open(struct fil - file->private_data = &ctx->fh; - ctx->dev = dev; - hdl = &ctx->hdl; -- if (!dev->decode) { -+ if (dev->role == ENCODE) { - /* Encode controls */ - v4l2_ctrl_handler_init(hdl, 6); - -@@ -2303,14 +2334,11 @@ static int bcm2835_codec_get_supported_f - unsigned int i, j, num_encodings; - int ret; - -- ret = vchiq_mmal_component_init(dev->instance, -- dev->decode ? -- "ril.video_decode" : -- "ril.video_encode", -+ ret = vchiq_mmal_component_init(dev->instance, components[dev->role], - &component); - if (ret < 0) { -- v4l2_err(&dev->v4l2_dev, "%s: failed to create component\n", -- __func__); -+ v4l2_err(&dev->v4l2_dev, "%s: failed to create component %s\n", -+ __func__, components[dev->role]); - return -ENOMEM; - } - -@@ -2406,12 +2434,13 @@ destroy_component: - - static int bcm2835_codec_create(struct platform_device *pdev, - struct bcm2835_codec_dev **new_dev, -- bool decode) -+ enum bcm2835_codec_role role) - { - struct bcm2835_codec_dev *dev; - struct video_device *vfd; - int video_nr; - int ret; -+ const static char *roles[] = {"decode", "encode", "isp"}; - - dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); - if (!dev) -@@ -2419,7 +2448,7 @@ static int bcm2835_codec_create(struct p - - dev->pdev = pdev; - -- dev->decode = decode; -+ dev->role = role; - - ret = vchiq_mmal_init(&dev->instance); - if (ret) -@@ -2441,14 +2470,27 @@ static int bcm2835_codec_create(struct p - vfd->lock = &dev->dev_mutex; - vfd->v4l2_dev = &dev->v4l2_dev; - -- if (dev->decode) { -+ switch (role) { -+ case DECODE: - v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD); - v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); - video_nr = decode_video_nr; -- } else { -+ break; -+ case ENCODE: - v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); - v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); - video_nr = encode_video_nr; -+ break; -+ case ISP: -+ v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD); -+ v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); -+ v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); -+ v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); -+ video_nr = isp_video_nr; -+ break; -+ default: -+ ret = -EINVAL; -+ goto unreg_dev; - } - - ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); -@@ -2473,7 +2515,7 @@ static int bcm2835_codec_create(struct p - } - - v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s\n", -- dev->decode ? "decode" : "encode"); -+ roles[role]); - return 0; - - err_m2m: -@@ -2509,11 +2551,15 @@ static int bcm2835_codec_probe(struct pl - if (!drv) - return -ENOMEM; - -- ret = bcm2835_codec_create(pdev, &drv->encode, false); -+ ret = bcm2835_codec_create(pdev, &drv->decode, DECODE); - if (ret) - goto out; - -- ret = bcm2835_codec_create(pdev, &drv->decode, true); -+ ret = bcm2835_codec_create(pdev, &drv->encode, ENCODE); -+ if (ret) -+ goto out; -+ -+ ret = bcm2835_codec_create(pdev, &drv->isp, ISP); - if (ret) - goto out; - -@@ -2526,6 +2572,10 @@ out: - bcm2835_codec_destroy(drv->encode); - drv->encode = NULL; - } -+ if (drv->decode) { -+ bcm2835_codec_destroy(drv->decode); -+ drv->decode = NULL; -+ } - return ret; - } - -@@ -2533,6 +2583,8 @@ static int bcm2835_codec_remove(struct p - { - struct bcm2835_codec_driver *drv = platform_get_drvdata(pdev); - -+ bcm2835_codec_destroy(drv->isp); -+ - bcm2835_codec_destroy(drv->encode); - - bcm2835_codec_destroy(drv->decode); diff --git a/target/linux/brcm2708/patches-4.19/950-0357-ASoC-tlv320aic32x4-Break-out-clock-setting-into-sepa.patch b/target/linux/brcm2708/patches-4.19/950-0357-ASoC-tlv320aic32x4-Break-out-clock-setting-into-sepa.patch new file mode 100644 index 0000000000..3a63be1784 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0357-ASoC-tlv320aic32x4-Break-out-clock-setting-into-sepa.patch @@ -0,0 +1,64 @@ +From 95b3311cbcd29e07af1ee96b6b37c9089567bcff Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Mon, 18 Mar 2019 20:37:44 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Break out clock setting into + separate function + +commit bf31cbfbe25001036e1e096b1c260bf871766ea5 upstream. + +Break the clock setting logic out from the main hw_params. It's +rather large and unweildy and makes for a large function. This +also better enables some of the following changes to the clock +tree access in the driver. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 26 ++++++++++++++++++-------- + 1 file changed, 18 insertions(+), 8 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -698,17 +698,13 @@ static int aic32x4_set_dai_fmt(struct sn + return 0; + } + +-static int aic32x4_hw_params(struct snd_pcm_substream *substream, +- struct snd_pcm_hw_params *params, +- struct snd_soc_dai *dai) ++static int aic32x4_setup_clocks(struct snd_soc_component *component, ++ unsigned int sample_rate, ++ unsigned int parent_rate) + { +- struct snd_soc_component *component = dai->component; +- struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); +- u8 iface1_reg = 0; +- u8 dacsetup_reg = 0; + int i; + +- i = aic32x4_get_divs(aic32x4->sysclk, params_rate(params)); ++ i = aic32x4_get_divs(parent_rate, sample_rate); + if (i < 0) { + printk(KERN_ERR "aic32x4: sampling rate not supported\n"); + return i; +@@ -765,6 +761,20 @@ static int aic32x4_hw_params(struct snd_ + snd_soc_component_update_bits(component, AIC32X4_BCLKN, + AIC32X4_BCLK_MASK, aic32x4_divs[i].blck_N); + ++ return 0; ++} ++ ++static int aic32x4_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params, ++ struct snd_soc_dai *dai) ++{ ++ struct snd_soc_component *component = dai->component; ++ struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); ++ u8 iface1_reg = 0; ++ u8 dacsetup_reg = 0; ++ ++ aic32x4_setup_clocks(component, params_rate(params), aic32x4->sysclk); ++ + switch (params_width(params)) { + case 16: + iface1_reg |= (AIC32X4_WORD_LEN_16BITS << diff --git a/target/linux/brcm2708/patches-4.19/950-0357-staging-bcm2835_codec-Add-an-option-for-ignoring-Bay.patch b/target/linux/brcm2708/patches-4.19/950-0357-staging-bcm2835_codec-Add-an-option-for-ignoring-Bay.patch deleted file mode 100644 index f46d05c59e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0357-staging-bcm2835_codec-Add-an-option-for-ignoring-Bay.patch +++ /dev/null @@ -1,179 +0,0 @@ -From a126fcc4ff38718e2e714fbb78db3ca1c4f8e564 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 15 Feb 2019 11:36:14 +0000 -Subject: [PATCH 357/806] staging: bcm2835_codec: Add an option for ignoring - Bayer formats. - -This is a workaround for GStreamer currently not identifying Bayer -as a raw format, therefore any device that supports it does not -match the criteria for v4l2convert. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 29 ++++++++++++++++++- - 1 file changed, 28 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -58,6 +58,15 @@ static int isp_video_nr = 12; - module_param(isp_video_nr, int, 0644); - MODULE_PARM_DESC(isp_video_nr, "isp video device number"); - -+/* -+ * Workaround for GStreamer v4l2convert component not considering Bayer formats -+ * as raw, and therefore not considering a V4L2 device that supports them as -+ * as a suitable candidate. -+ */ -+static bool disable_bayer; -+module_param(disable_bayer, bool, 0644); -+MODULE_PARM_DESC(disable_bayer, "Disable support for Bayer formats"); -+ - static unsigned int debug; - module_param(debug, uint, 0644); - MODULE_PARM_DESC(debug, "activates debug info (0-3)"); -@@ -105,6 +114,7 @@ struct bcm2835_codec_fmt { - u32 flags; - u32 mmal_fmt; - int size_multiplier_x2; -+ bool is_bayer; - }; - - static const struct bcm2835_codec_fmt supported_formats[] = { -@@ -203,6 +213,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB8, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SBGGR8, - .depth = 8, -@@ -210,6 +221,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR8, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SGRBG8, - .depth = 8, -@@ -217,6 +229,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG8, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SGBRG8, - .depth = 8, -@@ -224,6 +237,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG8, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - /* 10 bit */ - .fourcc = V4L2_PIX_FMT_SRGGB10P, -@@ -232,6 +246,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB10P, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SBGGR10P, - .depth = 10, -@@ -239,6 +254,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR10P, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SGRBG10P, - .depth = 10, -@@ -246,6 +262,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG10P, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SGBRG10P, - .depth = 10, -@@ -253,6 +270,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG10P, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - /* 12 bit */ - .fourcc = V4L2_PIX_FMT_SRGGB12P, -@@ -261,6 +279,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB12P, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SBGGR12P, - .depth = 12, -@@ -268,6 +287,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR12P, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SGRBG12P, - .depth = 12, -@@ -275,6 +295,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG12P, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SGBRG12P, - .depth = 12, -@@ -282,6 +303,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG12P, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - /* 16 bit */ - .fourcc = V4L2_PIX_FMT_SRGGB16, -@@ -290,6 +312,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SRGGB16, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SBGGR16, - .depth = 16, -@@ -297,6 +320,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SBGGR16, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SGRBG16, - .depth = 16, -@@ -304,6 +328,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SGRBG16, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - .fourcc = V4L2_PIX_FMT_SGBRG16, - .depth = 16, -@@ -311,6 +336,7 @@ static const struct bcm2835_codec_fmt su - .flags = 0, - .mmal_fmt = MMAL_ENCODING_BAYER_SGBRG16, - .size_multiplier_x2 = 2, -+ .is_bayer = true, - }, { - /* Compressed formats */ - .fourcc = V4L2_PIX_FMT_H264, -@@ -438,7 +464,8 @@ static const struct bcm2835_codec_fmt *g - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(supported_formats); i++) { -- if (supported_formats[i].mmal_fmt == mmal_fmt) -+ if (supported_formats[i].mmal_fmt == mmal_fmt && -+ (!disable_bayer || !supported_formats[i].is_bayer)) - return &supported_formats[i]; - } - return NULL; diff --git a/target/linux/brcm2708/patches-4.19/950-0358-ASoC-tlv320aic32x4-Properly-Set-Processing-Blocks.patch b/target/linux/brcm2708/patches-4.19/950-0358-ASoC-tlv320aic32x4-Properly-Set-Processing-Blocks.patch new file mode 100644 index 0000000000..cae096bd95 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0358-ASoC-tlv320aic32x4-Properly-Set-Processing-Blocks.patch @@ -0,0 +1,111 @@ +From 6cc882cf38b62fce2a07640413b05b43b420c77a Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Wed, 20 Mar 2019 19:38:44 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Properly Set Processing Blocks + +commit c95e3a4b96293403a427b5185e60fad28af51fdd upstream. + +Different processing blocks are required for different sampling +rates and power parameters. Set the processing blocks based +on this information. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 56 ++++++++++++++++++++------------ + 1 file changed, 36 insertions(+), 20 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -59,6 +59,8 @@ struct aic32x4_rate_divs { + u8 nadc; + u8 madc; + u8 blck_N; ++ u8 r_block; ++ u8 p_block; + }; + + struct aic32x4_priv { +@@ -307,34 +309,34 @@ static const struct snd_kcontrol_new aic + + static const struct aic32x4_rate_divs aic32x4_divs[] = { + /* 8k rate */ +- {12000000, 8000, 1, 7, 6800, 768, 5, 3, 128, 5, 18, 24}, +- {24000000, 8000, 2, 7, 6800, 768, 15, 1, 64, 45, 4, 24}, +- {25000000, 8000, 2, 7, 3728, 768, 15, 1, 64, 45, 4, 24}, ++ {12000000, 8000, 1, 7, 6800, 768, 5, 3, 128, 5, 18, 24, 1, 1}, ++ {24000000, 8000, 2, 7, 6800, 768, 15, 1, 64, 45, 4, 24, 1, 1}, ++ {25000000, 8000, 2, 7, 3728, 768, 15, 1, 64, 45, 4, 24, 1, 1}, + /* 11.025k rate */ +- {12000000, 11025, 1, 7, 5264, 512, 8, 2, 128, 8, 8, 16}, +- {24000000, 11025, 2, 7, 5264, 512, 16, 1, 64, 32, 4, 16}, ++ {12000000, 11025, 1, 7, 5264, 512, 8, 2, 128, 8, 8, 16, 1, 1}, ++ {24000000, 11025, 2, 7, 5264, 512, 16, 1, 64, 32, 4, 16, 1, 1}, + /* 16k rate */ +- {12000000, 16000, 1, 7, 6800, 384, 5, 3, 128, 5, 9, 12}, +- {24000000, 16000, 2, 7, 6800, 384, 15, 1, 64, 18, 5, 12}, +- {25000000, 16000, 2, 7, 3728, 384, 15, 1, 64, 18, 5, 12}, ++ {12000000, 16000, 1, 7, 6800, 384, 5, 3, 128, 5, 9, 12, 1, 1}, ++ {24000000, 16000, 2, 7, 6800, 384, 15, 1, 64, 18, 5, 12, 1, 1}, ++ {25000000, 16000, 2, 7, 3728, 384, 15, 1, 64, 18, 5, 12, 1, 1}, + /* 22.05k rate */ +- {12000000, 22050, 1, 7, 5264, 256, 4, 4, 128, 4, 8, 8}, +- {24000000, 22050, 2, 7, 5264, 256, 16, 1, 64, 16, 4, 8}, +- {25000000, 22050, 2, 7, 2253, 256, 16, 1, 64, 16, 4, 8}, ++ {12000000, 22050, 1, 7, 5264, 256, 4, 4, 128, 4, 8, 8, 1, 1}, ++ {24000000, 22050, 2, 7, 5264, 256, 16, 1, 64, 16, 4, 8, 1, 1}, ++ {25000000, 22050, 2, 7, 2253, 256, 16, 1, 64, 16, 4, 8, 1, 1}, + /* 32k rate */ +- {12000000, 32000, 1, 7, 1680, 192, 2, 7, 64, 2, 21, 6}, +- {24000000, 32000, 2, 7, 1680, 192, 7, 2, 64, 7, 6, 6}, ++ {12000000, 32000, 1, 7, 1680, 192, 2, 7, 64, 2, 21, 6, 1, 1}, ++ {24000000, 32000, 2, 7, 1680, 192, 7, 2, 64, 7, 6, 6, 1, 1}, + /* 44.1k rate */ +- {12000000, 44100, 1, 7, 5264, 128, 2, 8, 128, 2, 8, 4}, +- {24000000, 44100, 2, 7, 5264, 128, 8, 2, 64, 8, 4, 4}, +- {25000000, 44100, 2, 7, 2253, 128, 8, 2, 64, 8, 4, 4}, ++ {12000000, 44100, 1, 7, 5264, 128, 2, 8, 128, 2, 8, 4, 1, 1}, ++ {24000000, 44100, 2, 7, 5264, 128, 8, 2, 64, 8, 4, 4, 1, 1}, ++ {25000000, 44100, 2, 7, 2253, 128, 8, 2, 64, 8, 4, 4, 1, 1}, + /* 48k rate */ +- {12000000, 48000, 1, 8, 1920, 128, 2, 8, 128, 2, 8, 4}, +- {24000000, 48000, 2, 8, 1920, 128, 8, 2, 64, 8, 4, 4}, +- {25000000, 48000, 2, 7, 8643, 128, 8, 2, 64, 8, 4, 4}, ++ {12000000, 48000, 1, 8, 1920, 128, 2, 8, 128, 2, 8, 4, 1, 1}, ++ {24000000, 48000, 2, 8, 1920, 128, 8, 2, 64, 8, 4, 4, 1, 1}, ++ {25000000, 48000, 2, 7, 8643, 128, 8, 2, 64, 8, 4, 4, 1, 1}, + + /* 96k rate */ +- {25000000, 96000, 2, 7, 8643, 64, 4, 4, 64, 4, 4, 1}, ++ {25000000, 96000, 2, 7, 8643, 64, 4, 4, 64, 4, 4, 1, 1, 9}, + }; + + static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { +@@ -698,6 +700,18 @@ static int aic32x4_set_dai_fmt(struct sn + return 0; + } + ++static int aic32x4_set_processing_blocks(struct snd_soc_component *component, ++ u8 r_block, u8 p_block) ++{ ++ if (r_block > 18 || p_block > 25) ++ return -EINVAL; ++ ++ snd_soc_component_write(component, AIC32X4_ADCSPB, r_block); ++ snd_soc_component_write(component, AIC32X4_DACSPB, p_block); ++ ++ return 0; ++} ++ + static int aic32x4_setup_clocks(struct snd_soc_component *component, + unsigned int sample_rate, + unsigned int parent_rate) +@@ -710,6 +724,8 @@ static int aic32x4_setup_clocks(struct s + return i; + } + ++ aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); ++ + /* MCLK as PLL_CLKIN */ + snd_soc_component_update_bits(component, AIC32X4_CLKMUX, AIC32X4_PLL_CLKIN_MASK, + AIC32X4_PLL_CLKIN_MCLK << AIC32X4_PLL_CLKIN_SHIFT); diff --git a/target/linux/brcm2708/patches-4.19/950-0358-staging-bcm2835_codec-Fix-handling-of-VB2_MEMORY_DMA.patch b/target/linux/brcm2708/patches-4.19/950-0358-staging-bcm2835_codec-Fix-handling-of-VB2_MEMORY_DMA.patch deleted file mode 100644 index 1fd4db3bfd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0358-staging-bcm2835_codec-Fix-handling-of-VB2_MEMORY_DMA.patch +++ /dev/null @@ -1,186 +0,0 @@ -From 0df32e2f563123166c20677f022d4a0f825c5df2 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 15 Feb 2019 11:38:45 +0000 -Subject: [PATCH 358/806] staging: bcm2835_codec: Fix handling of - VB2_MEMORY_DMABUF buffers - -If the queue is configured as VB2_MEMORY_DMABUF then vb2_core_expbuf -fails as it ensures the queue is defined as VB2_MEMORY_MMAP. - -Correct the handling so that we unmap the buffer from vcsm and the -VPU on cleanup, and then correctly get the dma buf of the new buffer. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 80 +++++++++++++------ - .../vc04_services/vchiq-mmal/mmal-vchiq.c | 21 +++-- - .../vc04_services/vchiq-mmal/mmal-vchiq.h | 2 + - 3 files changed, 73 insertions(+), 30 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -1852,6 +1852,18 @@ static int bcm2835_codec_queue_setup(str - return 0; - } - -+static int bcm2835_codec_mmal_buf_cleanup(struct mmal_buffer *mmal_buf) -+{ -+ mmal_vchi_buffer_cleanup(mmal_buf); -+ -+ if (mmal_buf->dma_buf) { -+ dma_buf_put(mmal_buf->dma_buf); -+ mmal_buf->dma_buf = NULL; -+ } -+ -+ return 0; -+} -+ - static int bcm2835_codec_buf_init(struct vb2_buffer *vb) - { - struct bcm2835_codec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); -@@ -1880,6 +1892,7 @@ static int bcm2835_codec_buf_prepare(str - vb); - struct m2m_mmal_buffer *buf = container_of(m2m, struct m2m_mmal_buffer, - m2m); -+ struct dma_buf *dma_buf; - int ret; - - v4l2_dbg(4, debug, &ctx->dev->v4l2_dev, "%s: type: %d ptr %p\n", -@@ -1906,20 +1919,48 @@ static int bcm2835_codec_buf_prepare(str - if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) - vb2_set_plane_payload(vb, 0, q_data->sizeimage); - -- /* -- * We want to do this at init, but vb2_core_expbuf checks that the -- * index < q->num_buffers, and q->num_buffers only gets updated once -- * all the buffers are allocated. -- */ -- if (!buf->mmal.dma_buf) { -- ret = vb2_core_expbuf_dmabuf(vb->vb2_queue, -- vb->vb2_queue->type, vb->index, 0, -- O_CLOEXEC, &buf->mmal.dma_buf); -- if (ret) -- v4l2_err(&ctx->dev->v4l2_dev, "%s: Failed to expbuf idx %d, ret %d\n", -- __func__, vb->index, ret); -- } else { -+ switch (vb->memory) { -+ case VB2_MEMORY_DMABUF: -+ dma_buf = dma_buf_get(vb->planes[0].m.fd); -+ -+ if (dma_buf != buf->mmal.dma_buf) { -+ /* dmabuf either hasn't already been mapped, or it has -+ * changed. -+ */ -+ if (buf->mmal.dma_buf) { -+ v4l2_err(&ctx->dev->v4l2_dev, -+ "%s Buffer changed - why did the core not call cleanup?\n", -+ __func__); -+ bcm2835_codec_mmal_buf_cleanup(&buf->mmal); -+ } -+ -+ buf->mmal.dma_buf = dma_buf; -+ } - ret = 0; -+ break; -+ case VB2_MEMORY_MMAP: -+ /* -+ * We want to do this at init, but vb2_core_expbuf checks that -+ * the index < q->num_buffers, and q->num_buffers only gets -+ * updated once all the buffers are allocated. -+ */ -+ if (!buf->mmal.dma_buf) { -+ ret = vb2_core_expbuf_dmabuf(vb->vb2_queue, -+ vb->vb2_queue->type, -+ vb->index, 0, -+ O_CLOEXEC, -+ &buf->mmal.dma_buf); -+ if (ret) -+ v4l2_err(&ctx->dev->v4l2_dev, -+ "%s: Failed to expbuf idx %d, ret %d\n", -+ __func__, vb->index, ret); -+ } else { -+ ret = 0; -+ } -+ break; -+ default: -+ ret = -EINVAL; -+ break; - } - - return ret; -@@ -1948,12 +1989,7 @@ static void bcm2835_codec_buffer_cleanup - v4l2_dbg(2, debug, &ctx->dev->v4l2_dev, "%s: ctx:%p, vb %p\n", - __func__, ctx, vb); - -- mmal_vchi_buffer_cleanup(&buf->mmal); -- -- if (buf->mmal.dma_buf) { -- dma_buf_put(buf->mmal.dma_buf); -- buf->mmal.dma_buf = NULL; -- } -+ bcm2835_codec_mmal_buf_cleanup(&buf->mmal); - } - - static int bcm2835_codec_start_streaming(struct vb2_queue *q, -@@ -2067,11 +2103,7 @@ static void bcm2835_codec_stop_streaming - m2m = container_of(vb2, struct v4l2_m2m_buffer, vb); - buf = container_of(m2m, struct m2m_mmal_buffer, m2m); - -- mmal_vchi_buffer_cleanup(&buf->mmal); -- if (buf->mmal.dma_buf) { -- dma_buf_put(buf->mmal.dma_buf); -- buf->mmal.dma_buf = NULL; -- } -+ bcm2835_codec_mmal_buf_cleanup(&buf->mmal); - } - - /* If both ports disabled, then disable the component */ ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -1785,13 +1785,9 @@ int mmal_vchi_buffer_init(struct vchiq_m - } - EXPORT_SYMBOL_GPL(mmal_vchi_buffer_init); - --int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf) -+int mmal_vchi_buffer_unmap(struct mmal_buffer *buf) - { -- struct mmal_msg_context *msg_context = buf->msg_context; -- -- if (msg_context) -- release_msg_context(msg_context); -- buf->msg_context = NULL; -+ int ret = 0; - - if (buf->vcsm_handle) { - int ret; -@@ -1803,6 +1799,19 @@ int mmal_vchi_buffer_cleanup(struct mmal - pr_err("%s: vcsm_free failed, ret %d\n", __func__, ret); - buf->vcsm_handle = 0; - } -+ return ret; -+} -+EXPORT_SYMBOL_GPL(mmal_vchi_buffer_unmap); -+ -+int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf) -+{ -+ struct mmal_msg_context *msg_context = buf->msg_context; -+ -+ if (msg_context) -+ release_msg_context(msg_context); -+ buf->msg_context = NULL; -+ -+ mmal_vchi_buffer_unmap(buf); - return 0; - } - EXPORT_SYMBOL_GPL(mmal_vchi_buffer_cleanup); ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.h -@@ -167,6 +167,8 @@ int vchiq_mmal_submit_buffer(struct vchi - struct vchiq_mmal_port *port, - struct mmal_buffer *buf); - -+int mmal_vchi_buffer_unmap(struct mmal_buffer *buf); -+ - int mmal_vchi_buffer_init(struct vchiq_mmal_instance *instance, - struct mmal_buffer *buf); - int mmal_vchi_buffer_cleanup(struct mmal_buffer *buf); diff --git a/target/linux/brcm2708/patches-4.19/950-0359-ASoC-tlv320aic32x4-Model-PLL-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0359-ASoC-tlv320aic32x4-Model-PLL-in-CCF.patch new file mode 100644 index 0000000000..4e0ddb9124 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0359-ASoC-tlv320aic32x4-Model-PLL-in-CCF.patch @@ -0,0 +1,877 @@ +From 957ccf05060d65da074d019679ec7f486477e412 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:45 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Model PLL in CCF + +commit 514b044cba667e4b7c383ec79b42b997e624b91d upstream. + +Model and manage the on-board PLL as a component in the Core +Clock Framework. This should allow us to do some more complex +clock management and power control. Also, some of the +on-board chip clocks can be exposed to the outside, and this +change will make those clocks easier to consume by other +parts of the kernel. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/Kconfig | 1 + + sound/soc/codecs/Makefile | 2 +- + sound/soc/codecs/tlv320aic32x4-clk.c | 323 +++++++++++++++++++++++++++ + sound/soc/codecs/tlv320aic32x4.c | 195 ++++++++-------- + sound/soc/codecs/tlv320aic32x4.h | 5 + + 5 files changed, 431 insertions(+), 95 deletions(-) + create mode 100644 sound/soc/codecs/tlv320aic32x4-clk.c + +--- a/sound/soc/codecs/Kconfig ++++ b/sound/soc/codecs/Kconfig +@@ -1025,6 +1025,7 @@ config SND_SOC_TLV320AIC31XX + + config SND_SOC_TLV320AIC32X4 + tristate ++ depends on COMMON_CLK + + config SND_SOC_TLV320AIC32X4_I2C + tristate "Texas Instruments TLV320AIC32x4 audio CODECs - I2C" +--- a/sound/soc/codecs/Makefile ++++ b/sound/soc/codecs/Makefile +@@ -182,7 +182,7 @@ snd-soc-tlv320aic23-i2c-objs := tlv320ai + snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o + snd-soc-tlv320aic26-objs := tlv320aic26.o + snd-soc-tlv320aic31xx-objs := tlv320aic31xx.o +-snd-soc-tlv320aic32x4-objs := tlv320aic32x4.o ++snd-soc-tlv320aic32x4-objs := tlv320aic32x4.o tlv320aic32x4-clk.o + snd-soc-tlv320aic32x4-i2c-objs := tlv320aic32x4-i2c.o + snd-soc-tlv320aic32x4-spi-objs := tlv320aic32x4-spi.o + snd-soc-tlv320aic3x-objs := tlv320aic3x.o +--- /dev/null ++++ b/sound/soc/codecs/tlv320aic32x4-clk.c +@@ -0,0 +1,323 @@ ++/* SPDX-License-Identifier: GPL-2.0 ++ * ++ * Clock Tree for the Texas Instruments TLV320AIC32x4 ++ * ++ * Copyright 2019 Annaliese McDermond ++ * ++ * Author: Annaliese McDermond ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include "tlv320aic32x4.h" ++ ++#define to_clk_aic32x4(_hw) container_of(_hw, struct clk_aic32x4, hw) ++struct clk_aic32x4 { ++ struct clk_hw hw; ++ struct device *dev; ++ struct regmap *regmap; ++ unsigned int reg; ++}; ++ ++/* ++ * struct clk_aic32x4_pll_muldiv - Multiplier/divider settings ++ * @p: Divider ++ * @r: first multiplier ++ * @j: integer part of second multiplier ++ * @d: decimal part of second multiplier ++ */ ++struct clk_aic32x4_pll_muldiv { ++ u8 p; ++ u16 r; ++ u8 j; ++ u16 d; ++}; ++ ++struct aic32x4_clkdesc { ++ const char *name; ++ const char * const *parent_names; ++ unsigned int num_parents; ++ const struct clk_ops *ops; ++ unsigned int reg; ++}; ++ ++static int clk_aic32x4_pll_prepare(struct clk_hw *hw) ++{ ++ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); ++ ++ return regmap_update_bits(pll->regmap, AIC32X4_PLLPR, ++ AIC32X4_PLLEN, AIC32X4_PLLEN); ++} ++ ++static void clk_aic32x4_pll_unprepare(struct clk_hw *hw) ++{ ++ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); ++ ++ regmap_update_bits(pll->regmap, AIC32X4_PLLPR, ++ AIC32X4_PLLEN, 0); ++} ++ ++static int clk_aic32x4_pll_is_prepared(struct clk_hw *hw) ++{ ++ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); ++ ++ unsigned int val; ++ int ret; ++ ++ ret = regmap_read(pll->regmap, AIC32X4_PLLPR, &val); ++ if (ret < 0) ++ return ret; ++ ++ return !!(val & AIC32X4_PLLEN); ++} ++ ++static int clk_aic32x4_pll_get_muldiv(struct clk_aic32x4 *pll, ++ struct clk_aic32x4_pll_muldiv *settings) ++{ ++ /* Change to use regmap_bulk_read? */ ++ unsigned int val; ++ int ret; ++ ++ ret = regmap_read(pll->regmap, AIC32X4_PLLPR, &val); ++ if (ret) ++ return ret; ++ settings->r = val & AIC32X4_PLL_R_MASK; ++ settings->p = (val & AIC32X4_PLL_P_MASK) >> AIC32X4_PLL_P_SHIFT; ++ ++ ret = regmap_read(pll->regmap, AIC32X4_PLLJ, &val); ++ if (ret < 0) ++ return ret; ++ settings->j = val; ++ ++ ret = regmap_read(pll->regmap, AIC32X4_PLLDMSB, &val); ++ if (ret < 0) ++ return ret; ++ settings->d = val << 8; ++ ++ ret = regmap_read(pll->regmap, AIC32X4_PLLDLSB, &val); ++ if (ret < 0) ++ return ret; ++ settings->d |= val; ++ ++ return 0; ++} ++ ++static int clk_aic32x4_pll_set_muldiv(struct clk_aic32x4 *pll, ++ struct clk_aic32x4_pll_muldiv *settings) ++{ ++ int ret; ++ /* Change to use regmap_bulk_write for some if not all? */ ++ ++ ret = regmap_update_bits(pll->regmap, AIC32X4_PLLPR, ++ AIC32X4_PLL_R_MASK, settings->r); ++ if (ret < 0) ++ return ret; ++ ++ ret = regmap_update_bits(pll->regmap, AIC32X4_PLLPR, ++ AIC32X4_PLL_P_MASK, ++ settings->p << AIC32X4_PLL_P_SHIFT); ++ if (ret < 0) ++ return ret; ++ ++ ret = regmap_write(pll->regmap, AIC32X4_PLLJ, settings->j); ++ if (ret < 0) ++ return ret; ++ ++ ret = regmap_write(pll->regmap, AIC32X4_PLLDMSB, (settings->d >> 8)); ++ if (ret < 0) ++ return ret; ++ ret = regmap_write(pll->regmap, AIC32X4_PLLDLSB, (settings->d & 0xff)); ++ if (ret < 0) ++ return ret; ++ ++ return 0; ++} ++ ++static unsigned long clk_aic32x4_pll_calc_rate( ++ struct clk_aic32x4_pll_muldiv *settings, ++ unsigned long parent_rate) ++{ ++ u64 rate; ++ /* ++ * We scale j by 10000 to account for the decimal part of P and divide ++ * it back out later. ++ */ ++ rate = (u64) parent_rate * settings->r * ++ ((settings->j * 10000) + settings->d); ++ ++ return (unsigned long) DIV_ROUND_UP_ULL(rate, settings->p * 10000); ++} ++ ++static int clk_aic32x4_pll_calc_muldiv(struct clk_aic32x4_pll_muldiv *settings, ++ unsigned long rate, unsigned long parent_rate) ++{ ++ u64 multiplier; ++ ++ settings->p = parent_rate / AIC32X4_MAX_PLL_CLKIN + 1; ++ if (settings->p > 8) ++ return -1; ++ ++ /* ++ * We scale this figure by 10000 so that we can get the decimal part ++ * of the multiplier. This is because we can't do floating point ++ * math in the kernel. ++ */ ++ multiplier = (u64) rate * settings->p * 10000; ++ do_div(multiplier, parent_rate); ++ ++ /* ++ * J can't be over 64, so R can scale this. ++ * R can't be greater than 4. ++ */ ++ settings->r = ((u32) multiplier / 640000) + 1; ++ if (settings->r > 4) ++ return -1; ++ do_div(multiplier, settings->r); ++ ++ /* ++ * J can't be < 1. ++ */ ++ if (multiplier < 10000) ++ return -1; ++ ++ /* Figure out the integer part, J, and the fractional part, D. */ ++ settings->j = (u32) multiplier / 10000; ++ settings->d = (u32) multiplier % 10000; ++ ++ return 0; ++} ++ ++static unsigned long clk_aic32x4_pll_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); ++ struct clk_aic32x4_pll_muldiv settings; ++ int ret; ++ ++ ret = clk_aic32x4_pll_get_muldiv(pll, &settings); ++ if (ret < 0) ++ return 0; ++ ++ return clk_aic32x4_pll_calc_rate(&settings, parent_rate); ++} ++ ++static long clk_aic32x4_pll_round_rate(struct clk_hw *hw, ++ unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ struct clk_aic32x4_pll_muldiv settings; ++ int ret; ++ ++ ret = clk_aic32x4_pll_calc_muldiv(&settings, rate, *parent_rate); ++ if (ret < 0) ++ return 0; ++ ++ return clk_aic32x4_pll_calc_rate(&settings, *parent_rate); ++} ++ ++static int clk_aic32x4_pll_set_rate(struct clk_hw *hw, ++ unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); ++ struct clk_aic32x4_pll_muldiv settings; ++ int ret; ++ ++ ret = clk_aic32x4_pll_calc_muldiv(&settings, rate, parent_rate); ++ if (ret < 0) ++ return -EINVAL; ++ ++ return clk_aic32x4_pll_set_muldiv(pll, &settings); ++} ++ ++static int clk_aic32x4_pll_set_parent(struct clk_hw *hw, u8 index) ++{ ++ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); ++ ++ return regmap_update_bits(pll->regmap, ++ AIC32X4_CLKMUX, ++ AIC32X4_PLL_CLKIN_MASK, ++ index << AIC32X4_PLL_CLKIN_SHIFT); ++} ++ ++static u8 clk_aic32x4_pll_get_parent(struct clk_hw *hw) ++{ ++ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); ++ unsigned int val; ++ ++ regmap_read(pll->regmap, AIC32X4_PLLPR, &val); ++ ++ return (val & AIC32X4_PLL_CLKIN_MASK) >> AIC32X4_PLL_CLKIN_SHIFT; ++} ++ ++ ++static const struct clk_ops aic32x4_pll_ops = { ++ .prepare = clk_aic32x4_pll_prepare, ++ .unprepare = clk_aic32x4_pll_unprepare, ++ .is_prepared = clk_aic32x4_pll_is_prepared, ++ .recalc_rate = clk_aic32x4_pll_recalc_rate, ++ .round_rate = clk_aic32x4_pll_round_rate, ++ .set_rate = clk_aic32x4_pll_set_rate, ++ .set_parent = clk_aic32x4_pll_set_parent, ++ .get_parent = clk_aic32x4_pll_get_parent, ++}; ++ ++static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { ++ { ++ .name = "pll", ++ .parent_names = ++ (const char* []) { "mclk", "bclk", "gpio", "din" }, ++ .num_parents = 4, ++ .ops = &aic32x4_pll_ops, ++ .reg = 0, ++ }, ++}; ++ ++static struct clk *aic32x4_register_clk(struct device *dev, ++ struct aic32x4_clkdesc *desc) ++{ ++ struct clk_init_data init; ++ struct clk_aic32x4 *priv; ++ const char *devname = dev_name(dev); ++ ++ init.ops = desc->ops; ++ init.name = desc->name; ++ init.parent_names = desc->parent_names; ++ init.num_parents = desc->num_parents; ++ init.flags = 0; ++ ++ priv = devm_kzalloc(dev, sizeof(struct clk_aic32x4), GFP_KERNEL); ++ if (priv == NULL) ++ return (struct clk *) -ENOMEM; ++ ++ priv->dev = dev; ++ priv->hw.init = &init; ++ priv->regmap = dev_get_regmap(dev, NULL); ++ priv->reg = desc->reg; ++ ++ clk_hw_register_clkdev(&priv->hw, desc->name, devname); ++ return devm_clk_register(dev, &priv->hw); ++} ++ ++int aic32x4_register_clocks(struct device *dev, const char *mclk_name) ++{ ++ int i; ++ ++ /* ++ * These lines are here to preserve the current functionality of ++ * the driver with regard to the DT. These should eventually be set ++ * by DT nodes so that the connections can be set up in configuration ++ * rather than code. ++ */ ++ aic32x4_clkdesc_array[0].parent_names = ++ (const char* []) { mclk_name, "bclk", "gpio", "din" }; ++ ++ for (i = 0; i < ARRAY_SIZE(aic32x4_clkdesc_array); ++i) ++ aic32x4_register_clk(dev, &aic32x4_clkdesc_array[i]); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(aic32x4_register_clocks); +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -14,7 +14,7 @@ + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License +@@ -33,6 +33,7 @@ + #include + #include + #include ++#include + #include + + #include +@@ -49,9 +50,7 @@ + struct aic32x4_rate_divs { + u32 mclk; + u32 rate; +- u8 p_val; +- u8 pll_j; +- u16 pll_d; ++ unsigned long pll_rate; + u16 dosr; + u8 ndac; + u8 mdac; +@@ -71,6 +70,7 @@ struct aic32x4_priv { + bool swapdacs; + int rstn_gpio; + struct clk *mclk; ++ const char *mclk_name; + + struct regulator *supply_ldo; + struct regulator *supply_iov; +@@ -309,34 +309,34 @@ static const struct snd_kcontrol_new aic + + static const struct aic32x4_rate_divs aic32x4_divs[] = { + /* 8k rate */ +- {12000000, 8000, 1, 7, 6800, 768, 5, 3, 128, 5, 18, 24, 1, 1}, +- {24000000, 8000, 2, 7, 6800, 768, 15, 1, 64, 45, 4, 24, 1, 1}, +- {25000000, 8000, 2, 7, 3728, 768, 15, 1, 64, 45, 4, 24, 1, 1}, ++ { 12000000, 8000, 57120000, 768, 5, 3, 128, 5, 18, 24, 1, 1 }, ++ { 24000000, 8000, 57120000, 768, 15, 1, 64, 45, 4, 24, 1, 1 }, ++ { 25000000, 8000, 32620000, 768, 15, 1, 64, 45, 4, 24, 1, 1 }, + /* 11.025k rate */ +- {12000000, 11025, 1, 7, 5264, 512, 8, 2, 128, 8, 8, 16, 1, 1}, +- {24000000, 11025, 2, 7, 5264, 512, 16, 1, 64, 32, 4, 16, 1, 1}, ++ { 12000000, 11025, 44217600, 512, 8, 2, 128, 8, 8, 16, 1, 1 }, ++ { 24000000, 11025, 44217600, 512, 16, 1, 64, 32, 4, 16, 1, 1 }, + /* 16k rate */ +- {12000000, 16000, 1, 7, 6800, 384, 5, 3, 128, 5, 9, 12, 1, 1}, +- {24000000, 16000, 2, 7, 6800, 384, 15, 1, 64, 18, 5, 12, 1, 1}, +- {25000000, 16000, 2, 7, 3728, 384, 15, 1, 64, 18, 5, 12, 1, 1}, ++ { 12000000, 16000, 57120000, 384, 5, 3, 128, 5, 9, 12, 1, 1 }, ++ { 24000000, 16000, 57120000, 384, 15, 1, 64, 18, 5, 12, 1, 1 }, ++ { 25000000, 16000, 32620000, 384, 15, 1, 64, 18, 5, 12, 1, 1 }, + /* 22.05k rate */ +- {12000000, 22050, 1, 7, 5264, 256, 4, 4, 128, 4, 8, 8, 1, 1}, +- {24000000, 22050, 2, 7, 5264, 256, 16, 1, 64, 16, 4, 8, 1, 1}, +- {25000000, 22050, 2, 7, 2253, 256, 16, 1, 64, 16, 4, 8, 1, 1}, ++ { 12000000, 22050, 44217600, 256, 4, 4, 128, 4, 8, 8, 1, 1 }, ++ { 24000000, 22050, 44217600, 256, 16, 1, 64, 16, 4, 8, 1, 1 }, ++ { 25000000, 22050, 19713750, 256, 16, 1, 64, 16, 4, 8, 1, 1 }, + /* 32k rate */ +- {12000000, 32000, 1, 7, 1680, 192, 2, 7, 64, 2, 21, 6, 1, 1}, +- {24000000, 32000, 2, 7, 1680, 192, 7, 2, 64, 7, 6, 6, 1, 1}, ++ { 12000000, 32000, 14112000, 192, 2, 7, 64, 2, 21, 6, 1, 1 }, ++ { 24000000, 32000, 14112000, 192, 7, 2, 64, 7, 6, 6, 1, 1 }, + /* 44.1k rate */ +- {12000000, 44100, 1, 7, 5264, 128, 2, 8, 128, 2, 8, 4, 1, 1}, +- {24000000, 44100, 2, 7, 5264, 128, 8, 2, 64, 8, 4, 4, 1, 1}, +- {25000000, 44100, 2, 7, 2253, 128, 8, 2, 64, 8, 4, 4, 1, 1}, ++ { 12000000, 44100, 44217600, 128, 2, 8, 128, 2, 8, 4, 1, 1 }, ++ { 24000000, 44100, 44217600, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, ++ { 25000000, 44100, 19713750, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, + /* 48k rate */ +- {12000000, 48000, 1, 8, 1920, 128, 2, 8, 128, 2, 8, 4, 1, 1}, +- {24000000, 48000, 2, 8, 1920, 128, 8, 2, 64, 8, 4, 4, 1, 1}, +- {25000000, 48000, 2, 7, 8643, 128, 8, 2, 64, 8, 4, 4, 1, 1}, ++ { 12000000, 48000, 18432000, 128, 2, 8, 128, 2, 8, 4, 1, 1 }, ++ { 24000000, 48000, 18432000, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, ++ { 25000000, 48000, 75626250, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, + + /* 96k rate */ +- {25000000, 96000, 2, 7, 8643, 64, 4, 4, 64, 4, 4, 1, 1, 9}, ++ { 25000000, 96000, 75626250, 64, 4, 4, 64, 4, 4, 1, 1, 9 }, + }; + + static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { +@@ -393,7 +393,7 @@ static const struct snd_kcontrol_new in3 + SOC_DAPM_ENUM("IN3_R L- Switch", in3r_lpga_n_enum), + }; + +-/* Right mixer pins */ ++/* Right mixer pins */ + static SOC_ENUM_SINGLE_DECL(in1r_rpga_p_enum, AIC32X4_RMICPGAPIN, 6, resistor_text); + static SOC_ENUM_SINGLE_DECL(in2r_rpga_p_enum, AIC32X4_RMICPGAPIN, 4, resistor_text); + static SOC_ENUM_SINGLE_DECL(in3r_rpga_p_enum, AIC32X4_RMICPGAPIN, 2, resistor_text); +@@ -597,7 +597,7 @@ static const struct snd_soc_dapm_route a + static const struct regmap_range_cfg aic32x4_regmap_pages[] = { + { + .selector_reg = 0, +- .selector_mask = 0xff, ++ .selector_mask = 0xff, + .window_start = 0, + .window_len = 128, + .range_min = 0, +@@ -618,7 +618,7 @@ static inline int aic32x4_get_divs(int m + + for (i = 0; i < ARRAY_SIZE(aic32x4_divs); i++) { + if ((aic32x4_divs[i].rate == rate) +- && (aic32x4_divs[i].mclk == mclk)) { ++ && (aic32x4_divs[i].mclk == mclk)) { + return i; + } + } +@@ -690,12 +690,12 @@ static int aic32x4_set_dai_fmt(struct sn + } + + snd_soc_component_update_bits(component, AIC32X4_IFACE1, +- AIC32X4_IFACE1_DATATYPE_MASK | +- AIC32X4_IFACE1_MASTER_MASK, iface_reg_1); ++ AIC32X4_IFACE1_DATATYPE_MASK | ++ AIC32X4_IFACE1_MASTER_MASK, iface_reg_1); + snd_soc_component_update_bits(component, AIC32X4_IFACE2, +- AIC32X4_DATA_OFFSET_MASK, iface_reg_2); ++ AIC32X4_DATA_OFFSET_MASK, iface_reg_2); + snd_soc_component_update_bits(component, AIC32X4_IFACE3, +- AIC32X4_BCLKINV_MASK, iface_reg_3); ++ AIC32X4_BCLKINV_MASK, iface_reg_3); + + return 0; + } +@@ -717,6 +717,11 @@ static int aic32x4_setup_clocks(struct s + unsigned int parent_rate) + { + int i; ++ int ret; ++ ++ struct clk_bulk_data clocks[] = { ++ { .id = "pll" }, ++ }; + + i = aic32x4_get_divs(parent_rate, sample_rate); + if (i < 0) { +@@ -724,39 +729,29 @@ static int aic32x4_setup_clocks(struct s + return i; + } + ++ ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); ++ if (ret) ++ return ret; ++ ++ clk_set_rate(clocks[0].clk, sample_rate); ++ + aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); + +- /* MCLK as PLL_CLKIN */ +- snd_soc_component_update_bits(component, AIC32X4_CLKMUX, AIC32X4_PLL_CLKIN_MASK, +- AIC32X4_PLL_CLKIN_MCLK << AIC32X4_PLL_CLKIN_SHIFT); + /* PLL as CODEC_CLKIN */ +- snd_soc_component_update_bits(component, AIC32X4_CLKMUX, AIC32X4_CODEC_CLKIN_MASK, +- AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); ++ snd_soc_component_update_bits(component, AIC32X4_CLKMUX, ++ AIC32X4_CODEC_CLKIN_MASK, ++ AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); + /* DAC_MOD_CLK as BDIV_CLKIN */ + snd_soc_component_update_bits(component, AIC32X4_IFACE3, AIC32X4_BDIVCLK_MASK, +- AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); +- +- /* We will fix R value to 1 and will make P & J=K.D as variable */ +- snd_soc_component_update_bits(component, AIC32X4_PLLPR, AIC32X4_PLL_R_MASK, 0x01); +- +- /* PLL P value */ +- snd_soc_component_update_bits(component, AIC32X4_PLLPR, AIC32X4_PLL_P_MASK, +- aic32x4_divs[i].p_val << AIC32X4_PLL_P_SHIFT); +- +- /* PLL J value */ +- snd_soc_component_write(component, AIC32X4_PLLJ, aic32x4_divs[i].pll_j); +- +- /* PLL D value */ +- snd_soc_component_write(component, AIC32X4_PLLDMSB, (aic32x4_divs[i].pll_d >> 8)); +- snd_soc_component_write(component, AIC32X4_PLLDLSB, (aic32x4_divs[i].pll_d & 0xff)); ++ AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); + + /* NDAC divider value */ + snd_soc_component_update_bits(component, AIC32X4_NDAC, +- AIC32X4_NDAC_MASK, aic32x4_divs[i].ndac); ++ AIC32X4_NDAC_MASK, aic32x4_divs[i].ndac); + + /* MDAC divider value */ + snd_soc_component_update_bits(component, AIC32X4_MDAC, +- AIC32X4_MDAC_MASK, aic32x4_divs[i].mdac); ++ AIC32X4_MDAC_MASK, aic32x4_divs[i].mdac); + + /* DOSR MSB & LSB values */ + snd_soc_component_write(component, AIC32X4_DOSRMSB, aic32x4_divs[i].dosr >> 8); +@@ -764,18 +759,18 @@ static int aic32x4_setup_clocks(struct s + + /* NADC divider value */ + snd_soc_component_update_bits(component, AIC32X4_NADC, +- AIC32X4_NADC_MASK, aic32x4_divs[i].nadc); ++ AIC32X4_NADC_MASK, aic32x4_divs[i].nadc); + + /* MADC divider value */ + snd_soc_component_update_bits(component, AIC32X4_MADC, +- AIC32X4_MADC_MASK, aic32x4_divs[i].madc); ++ AIC32X4_MADC_MASK, aic32x4_divs[i].madc); + + /* AOSR value */ + snd_soc_component_write(component, AIC32X4_AOSR, aic32x4_divs[i].aosr); + + /* BCLK N divider */ + snd_soc_component_update_bits(component, AIC32X4_BCLKN, +- AIC32X4_BCLK_MASK, aic32x4_divs[i].blck_N); ++ AIC32X4_BCLK_MASK, aic32x4_divs[i].blck_N); + + return 0; + } +@@ -794,23 +789,23 @@ static int aic32x4_hw_params(struct snd_ + switch (params_width(params)) { + case 16: + iface1_reg |= (AIC32X4_WORD_LEN_16BITS << +- AIC32X4_IFACE1_DATALEN_SHIFT); ++ AIC32X4_IFACE1_DATALEN_SHIFT); + break; + case 20: + iface1_reg |= (AIC32X4_WORD_LEN_20BITS << +- AIC32X4_IFACE1_DATALEN_SHIFT); ++ AIC32X4_IFACE1_DATALEN_SHIFT); + break; + case 24: + iface1_reg |= (AIC32X4_WORD_LEN_24BITS << +- AIC32X4_IFACE1_DATALEN_SHIFT); ++ AIC32X4_IFACE1_DATALEN_SHIFT); + break; + case 32: + iface1_reg |= (AIC32X4_WORD_LEN_32BITS << +- AIC32X4_IFACE1_DATALEN_SHIFT); ++ AIC32X4_IFACE1_DATALEN_SHIFT); + break; + } + snd_soc_component_update_bits(component, AIC32X4_IFACE1, +- AIC32X4_IFACE1_DATALEN_MASK, iface1_reg); ++ AIC32X4_IFACE1_DATALEN_MASK, iface1_reg); + + if (params_channels(params) == 1) { + dacsetup_reg = AIC32X4_RDAC2LCHN | AIC32X4_LDAC2LCHN; +@@ -821,7 +816,7 @@ static int aic32x4_hw_params(struct snd_ + dacsetup_reg = AIC32X4_LDAC2LCHN | AIC32X4_RDAC2RCHN; + } + snd_soc_component_update_bits(component, AIC32X4_DACSETUP, +- AIC32X4_DAC_CHAN_MASK, dacsetup_reg); ++ AIC32X4_DAC_CHAN_MASK, dacsetup_reg); + + return 0; + } +@@ -831,7 +826,7 @@ static int aic32x4_mute(struct snd_soc_d + struct snd_soc_component *component = dai->component; + + snd_soc_component_update_bits(component, AIC32X4_DACMUTE, +- AIC32X4_MUTEON, mute ? AIC32X4_MUTEON : 0); ++ AIC32X4_MUTEON, mute ? AIC32X4_MUTEON : 0); + + return 0; + } +@@ -853,27 +848,27 @@ static int aic32x4_set_bias_level(struct + + /* Switch on PLL */ + snd_soc_component_update_bits(component, AIC32X4_PLLPR, +- AIC32X4_PLLEN, AIC32X4_PLLEN); ++ AIC32X4_PLLEN, AIC32X4_PLLEN); + + /* Switch on NDAC Divider */ + snd_soc_component_update_bits(component, AIC32X4_NDAC, +- AIC32X4_NDACEN, AIC32X4_NDACEN); ++ AIC32X4_NDACEN, AIC32X4_NDACEN); + + /* Switch on MDAC Divider */ + snd_soc_component_update_bits(component, AIC32X4_MDAC, +- AIC32X4_MDACEN, AIC32X4_MDACEN); ++ AIC32X4_MDACEN, AIC32X4_MDACEN); + + /* Switch on NADC Divider */ + snd_soc_component_update_bits(component, AIC32X4_NADC, +- AIC32X4_NADCEN, AIC32X4_NADCEN); ++ AIC32X4_NADCEN, AIC32X4_NADCEN); + + /* Switch on MADC Divider */ + snd_soc_component_update_bits(component, AIC32X4_MADC, +- AIC32X4_MADCEN, AIC32X4_MADCEN); ++ AIC32X4_MADCEN, AIC32X4_MADCEN); + + /* Switch on BCLK_N Divider */ + snd_soc_component_update_bits(component, AIC32X4_BCLKN, +- AIC32X4_BCLKEN, AIC32X4_BCLKEN); ++ AIC32X4_BCLKEN, AIC32X4_BCLKEN); + break; + case SND_SOC_BIAS_PREPARE: + break; +@@ -884,27 +879,27 @@ static int aic32x4_set_bias_level(struct + + /* Switch off BCLK_N Divider */ + snd_soc_component_update_bits(component, AIC32X4_BCLKN, +- AIC32X4_BCLKEN, 0); ++ AIC32X4_BCLKEN, 0); + + /* Switch off MADC Divider */ + snd_soc_component_update_bits(component, AIC32X4_MADC, +- AIC32X4_MADCEN, 0); ++ AIC32X4_MADCEN, 0); + + /* Switch off NADC Divider */ + snd_soc_component_update_bits(component, AIC32X4_NADC, +- AIC32X4_NADCEN, 0); ++ AIC32X4_NADCEN, 0); + + /* Switch off MDAC Divider */ + snd_soc_component_update_bits(component, AIC32X4_MDAC, +- AIC32X4_MDACEN, 0); ++ AIC32X4_MDACEN, 0); + + /* Switch off NDAC Divider */ + snd_soc_component_update_bits(component, AIC32X4_NDAC, +- AIC32X4_NDACEN, 0); ++ AIC32X4_NDACEN, 0); + + /* Switch off PLL */ + snd_soc_component_update_bits(component, AIC32X4_PLLPR, +- AIC32X4_PLLEN, 0); ++ AIC32X4_PLLEN, 0); + + /* Switch off master clock */ + clk_disable_unprepare(aic32x4->mclk); +@@ -916,7 +911,7 @@ static int aic32x4_set_bias_level(struct + } + + #define AIC32X4_RATES SNDRV_PCM_RATE_8000_96000 +-#define AIC32X4_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \ ++#define AIC32X4_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \ + | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) + + static const struct snd_soc_dai_ops aic32x4_ops = { +@@ -929,17 +924,17 @@ static const struct snd_soc_dai_ops aic3 + static struct snd_soc_dai_driver aic32x4_dai = { + .name = "tlv320aic32x4-hifi", + .playback = { +- .stream_name = "Playback", +- .channels_min = 1, +- .channels_max = 2, +- .rates = AIC32X4_RATES, +- .formats = AIC32X4_FORMATS,}, ++ .stream_name = "Playback", ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = AIC32X4_RATES, ++ .formats = AIC32X4_FORMATS,}, + .capture = { +- .stream_name = "Capture", +- .channels_min = 1, +- .channels_max = 2, +- .rates = AIC32X4_RATES, +- .formats = AIC32X4_FORMATS,}, ++ .stream_name = "Capture", ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = AIC32X4_RATES, ++ .formats = AIC32X4_FORMATS,}, + .ops = &aic32x4_ops, + .symmetric_rates = 1, + }; +@@ -952,7 +947,7 @@ static void aic32x4_setup_gpios(struct s + /* MFP1 */ + if (aic32x4->setup->gpio_func[0] != AIC32X4_MFPX_DEFAULT_VALUE) { + snd_soc_component_write(component, AIC32X4_DINCTL, +- aic32x4->setup->gpio_func[0]); ++ aic32x4->setup->gpio_func[0]); + snd_soc_add_component_controls(component, aic32x4_mfp1, + ARRAY_SIZE(aic32x4_mfp1)); + } +@@ -960,7 +955,7 @@ static void aic32x4_setup_gpios(struct s + /* MFP2 */ + if (aic32x4->setup->gpio_func[1] != AIC32X4_MFPX_DEFAULT_VALUE) { + snd_soc_component_write(component, AIC32X4_DOUTCTL, +- aic32x4->setup->gpio_func[1]); ++ aic32x4->setup->gpio_func[1]); + snd_soc_add_component_controls(component, aic32x4_mfp2, + ARRAY_SIZE(aic32x4_mfp2)); + } +@@ -968,7 +963,7 @@ static void aic32x4_setup_gpios(struct s + /* MFP3 */ + if (aic32x4->setup->gpio_func[2] != AIC32X4_MFPX_DEFAULT_VALUE) { + snd_soc_component_write(component, AIC32X4_SCLKCTL, +- aic32x4->setup->gpio_func[2]); ++ aic32x4->setup->gpio_func[2]); + snd_soc_add_component_controls(component, aic32x4_mfp3, + ARRAY_SIZE(aic32x4_mfp3)); + } +@@ -976,7 +971,7 @@ static void aic32x4_setup_gpios(struct s + /* MFP4 */ + if (aic32x4->setup->gpio_func[3] != AIC32X4_MFPX_DEFAULT_VALUE) { + snd_soc_component_write(component, AIC32X4_MISOCTL, +- aic32x4->setup->gpio_func[3]); ++ aic32x4->setup->gpio_func[3]); + snd_soc_add_component_controls(component, aic32x4_mfp4, + ARRAY_SIZE(aic32x4_mfp4)); + } +@@ -984,7 +979,7 @@ static void aic32x4_setup_gpios(struct s + /* MFP5 */ + if (aic32x4->setup->gpio_func[4] != AIC32X4_MFPX_DEFAULT_VALUE) { + snd_soc_component_write(component, AIC32X4_GPIOCTL, +- aic32x4->setup->gpio_func[4]); ++ aic32x4->setup->gpio_func[4]); + snd_soc_add_component_controls(component, aic32x4_mfp5, + ARRAY_SIZE(aic32x4_mfp5)); + } +@@ -1007,8 +1002,8 @@ static int aic32x4_component_probe(struc + + /* Power platform configuration */ + if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { +- snd_soc_component_write(component, AIC32X4_MICBIAS, AIC32X4_MICBIAS_LDOIN | +- AIC32X4_MICBIAS_2075V); ++ snd_soc_component_write(component, AIC32X4_MICBIAS, ++ AIC32X4_MICBIAS_LDOIN | AIC32X4_MICBIAS_2075V); + } + if (aic32x4->power_cfg & AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE) + snd_soc_component_write(component, AIC32X4_PWRCFG, AIC32X4_AVDDWEAKDISABLE); +@@ -1071,12 +1066,18 @@ static int aic32x4_parse_dt(struct aic32 + struct device_node *np) + { + struct aic32x4_setup_data *aic32x4_setup; ++ int ret; + + aic32x4_setup = devm_kzalloc(aic32x4->dev, sizeof(*aic32x4_setup), + GFP_KERNEL); + if (!aic32x4_setup) + return -ENOMEM; + ++ ret = of_property_match_string(np, "clock-names", "mclk"); ++ if (ret < 0) ++ return -EINVAL; ++ aic32x4->mclk_name = of_clk_get_parent_name(np, ret); ++ + aic32x4->swapdacs = false; + aic32x4->micpga_routing = 0; + aic32x4->rstn_gpio = of_get_named_gpio(np, "reset-gpios", 0); +@@ -1198,7 +1199,7 @@ int aic32x4_probe(struct device *dev, st + return PTR_ERR(regmap); + + aic32x4 = devm_kzalloc(dev, sizeof(struct aic32x4_priv), +- GFP_KERNEL); ++ GFP_KERNEL); + if (aic32x4 == NULL) + return -ENOMEM; + +@@ -1210,6 +1211,7 @@ int aic32x4_probe(struct device *dev, st + aic32x4->swapdacs = pdata->swapdacs; + aic32x4->micpga_routing = pdata->micpga_routing; + aic32x4->rstn_gpio = pdata->rstn_gpio; ++ aic32x4->mclk_name = "mclk"; + } else if (np) { + ret = aic32x4_parse_dt(aic32x4, np); + if (ret) { +@@ -1221,6 +1223,7 @@ int aic32x4_probe(struct device *dev, st + aic32x4->swapdacs = false; + aic32x4->micpga_routing = 0; + aic32x4->rstn_gpio = -1; ++ aic32x4->mclk_name = "mclk"; + } + + aic32x4->mclk = devm_clk_get(dev, "mclk"); +@@ -1229,6 +1232,10 @@ int aic32x4_probe(struct device *dev, st + return PTR_ERR(aic32x4->mclk); + } + ++ ret = aic32x4_register_clocks(dev, aic32x4->mclk_name); ++ if (ret) ++ return ret; ++ + if (gpio_is_valid(aic32x4->rstn_gpio)) { + ret = devm_gpio_request_one(dev, aic32x4->rstn_gpio, + GPIOF_OUT_INIT_LOW, "tlv320aic32x4 rstn"); +--- a/sound/soc/codecs/tlv320aic32x4.h ++++ b/sound/soc/codecs/tlv320aic32x4.h +@@ -16,6 +16,7 @@ struct regmap_config; + extern const struct regmap_config aic32x4_regmap_config; + int aic32x4_probe(struct device *dev, struct regmap *regmap); + int aic32x4_remove(struct device *dev); ++int aic32x4_register_clocks(struct device *dev, const char *mclk_name); + + /* tlv320aic32x4 register space (in decimal to match datasheet) */ + +@@ -205,4 +206,8 @@ int aic32x4_remove(struct device *dev); + #define AIC32X4_RMICPGANIN_IN1L_10K 0x10 + #define AIC32X4_RMICPGANIN_CM1R_10K 0x40 + ++/* Clock Limits */ ++#define AIC32X4_MAX_PLL_CLKIN 20000000 ++ ++ + #endif /* _TLV320AIC32X4_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0359-staging-mmal-vchiq-Update-mmal_parameters.h-with-rec.patch b/target/linux/brcm2708/patches-4.19/950-0359-staging-mmal-vchiq-Update-mmal_parameters.h-with-rec.patch deleted file mode 100644 index 52ade9d575..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0359-staging-mmal-vchiq-Update-mmal_parameters.h-with-rec.patch +++ /dev/null @@ -1,56 +0,0 @@ -From f51a6ed76f6a59e65fe06d1f2e06e824f38ae604 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 18 Feb 2019 15:52:29 +0000 -Subject: [PATCH 359/806] staging: mmal-vchiq: Update mmal_parameters.h with - recently defined params - -mmal_parameters.h hasn't been updated to reflect additions made -over the last few years. Update it to reflect the currently -supported parameters. - -Signed-off-by: Dave Stevenson ---- - .../vchiq-mmal/mmal-parameters.h | 32 ++++++++++++++++++- - 1 file changed, 31 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h -@@ -580,7 +580,37 @@ enum mmal_parameter_video_type { - MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG, - - /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -- MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER -+ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER, -+ -+ /**< Take a @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_SEI_ENABLE, -+ -+ /**< Take a @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_VECTORS, -+ -+ /**< Take a @ref MMAL_PARAMETER_VIDEO_RENDER_STATS_T. */ -+ MMAL_PARAMETER_VIDEO_RENDER_STATS, -+ -+ /**< Take a @ref MMAL_PARAMETER_VIDEO_INTERLACE_TYPE_T. */ -+ MMAL_PARAMETER_VIDEO_INTERLACE_TYPE, -+ -+ /**< Takes a @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_INTERPOLATE_TIMESTAMPS, -+ -+ /**< Takes a @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_SPS_TIMING, -+ -+ /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_VIDEO_MAX_NUM_CALLBACKS, -+ -+ /**< Takes a @ref MMAL_PARAMETER_SOURCE_PATTERN_T */ -+ MMAL_PARAMETER_VIDEO_SOURCE_PATTERN, -+ -+ /**< Takes a @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_SEPARATE_NAL_BUFS, -+ -+ /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAME_LENGTH, - }; - - /** Valid mirror modes */ diff --git a/target/linux/brcm2708/patches-4.19/950-0360-ASoC-tlv320aic32x4-Model-CODEC_CLKIN-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0360-ASoC-tlv320aic32x4-Model-CODEC_CLKIN-in-CCF.patch new file mode 100644 index 0000000000..928d05a1d0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0360-ASoC-tlv320aic32x4-Model-CODEC_CLKIN-in-CCF.patch @@ -0,0 +1,120 @@ +From c5f9d78ec34de15732bcbff52bedba7a840e42b2 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:46 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF + +commit fd2df3aeafa4b4cc468d58e147e0822967034b71 upstream. + +Model and manage codec clock input as a component in the Core +Clock Framework. This should allow us to do some more complex +clock management and power control. Also, some of the +on-board chip clocks can be exposed to the outside, and this +change will make those clocks easier to consume by other +parts of the kernel. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4-clk.c | 34 ++++++++++++++++++++++++++++ + sound/soc/codecs/tlv320aic32x4.c | 18 +++++++++++---- + 2 files changed, 47 insertions(+), 5 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4-clk.c ++++ b/sound/soc/codecs/tlv320aic32x4-clk.c +@@ -265,6 +265,30 @@ static const struct clk_ops aic32x4_pll_ + .get_parent = clk_aic32x4_pll_get_parent, + }; + ++static int clk_aic32x4_codec_clkin_set_parent(struct clk_hw *hw, u8 index) ++{ ++ struct clk_aic32x4 *mux = to_clk_aic32x4(hw); ++ ++ return regmap_update_bits(mux->regmap, ++ AIC32X4_CLKMUX, ++ AIC32X4_CODEC_CLKIN_MASK, index << AIC32X4_CODEC_CLKIN_SHIFT); ++} ++ ++static u8 clk_aic32x4_codec_clkin_get_parent(struct clk_hw *hw) ++{ ++ struct clk_aic32x4 *mux = to_clk_aic32x4(hw); ++ unsigned int val; ++ ++ regmap_read(mux->regmap, AIC32X4_CLKMUX, &val); ++ ++ return (val & AIC32X4_CODEC_CLKIN_MASK) >> AIC32X4_CODEC_CLKIN_SHIFT; ++} ++ ++static const struct clk_ops aic32x4_codec_clkin_ops = { ++ .set_parent = clk_aic32x4_codec_clkin_set_parent, ++ .get_parent = clk_aic32x4_codec_clkin_get_parent, ++}; ++ + static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { + { + .name = "pll", +@@ -274,6 +298,14 @@ static struct aic32x4_clkdesc aic32x4_cl + .ops = &aic32x4_pll_ops, + .reg = 0, + }, ++ { ++ .name = "codec_clkin", ++ .parent_names = ++ (const char *[]) { "mclk", "bclk", "gpio", "pll" }, ++ .num_parents = 4, ++ .ops = &aic32x4_codec_clkin_ops, ++ .reg = 0, ++ }, + }; + + static struct clk *aic32x4_register_clk(struct device *dev, +@@ -314,6 +346,8 @@ int aic32x4_register_clocks(struct devic + */ + aic32x4_clkdesc_array[0].parent_names = + (const char* []) { mclk_name, "bclk", "gpio", "din" }; ++ aic32x4_clkdesc_array[1].parent_names = ++ (const char *[]) { mclk_name, "bclk", "gpio", "pll" }; + + for (i = 0; i < ARRAY_SIZE(aic32x4_clkdesc_array); ++i) + aic32x4_register_clk(dev, &aic32x4_clkdesc_array[i]); +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -737,12 +737,9 @@ static int aic32x4_setup_clocks(struct s + + aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); + +- /* PLL as CODEC_CLKIN */ +- snd_soc_component_update_bits(component, AIC32X4_CLKMUX, +- AIC32X4_CODEC_CLKIN_MASK, +- AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); + /* DAC_MOD_CLK as BDIV_CLKIN */ +- snd_soc_component_update_bits(component, AIC32X4_IFACE3, AIC32X4_BDIVCLK_MASK, ++ snd_soc_component_update_bits(component, AIC32X4_IFACE3, ++ AIC32X4_BDIVCLK_MASK, + AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); + + /* NDAC divider value */ +@@ -989,6 +986,15 @@ static int aic32x4_component_probe(struc + { + struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); + u32 tmp_reg; ++ int ret; ++ ++ struct clk_bulk_data clocks[] = { ++ { .id = "codec_clkin" }, ++ }; ++ ++ ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); ++ if (ret) ++ return ret; + + if (gpio_is_valid(aic32x4->rstn_gpio)) { + ndelay(10); +@@ -1000,6 +1006,8 @@ static int aic32x4_component_probe(struc + if (aic32x4->setup) + aic32x4_setup_gpios(component); + ++ clk_set_parent(clocks[0].clk, clocks[1].clk); ++ + /* Power platform configuration */ + if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { + snd_soc_component_write(component, AIC32X4_MICBIAS, diff --git a/target/linux/brcm2708/patches-4.19/950-0360-staging-bcm2835_codec-Include-timing-info-in-SPS-hea.patch b/target/linux/brcm2708/patches-4.19/950-0360-staging-bcm2835_codec-Include-timing-info-in-SPS-hea.patch deleted file mode 100644 index 33cd761a84..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0360-staging-bcm2835_codec-Include-timing-info-in-SPS-hea.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 7f9fd2338e3a9d7b46b6904bbd7f97851e9b3f52 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 18 Feb 2019 15:56:42 +0000 -Subject: [PATCH 360/806] staging: bcm2835_codec: Include timing info in SPS - headers - -Inserting timing information into the VUI block of the SPS is -optional with the VPU encoder. -GStreamer appears to require them when using V4L2 M2M, therefore -set the option to enable them from the encoder. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -1785,6 +1785,8 @@ static int bcm2835_codec_create_componen - goto destroy_component; - - if (dev->role == ENCODE) { -+ u32 param = 1; -+ - if (ctx->q_data[V4L2_M2M_SRC].sizeimage < - ctx->component->output[0].minimum_buffer.size) - v4l2_err(&dev->v4l2_dev, "buffer size mismatch sizeimage %u < min size %u\n", -@@ -1793,6 +1795,16 @@ static int bcm2835_codec_create_componen - - /* Now we have a component we can set all the ctrls */ - bcm2835_codec_set_ctrls(ctx); -+ -+ /* Enable SPS Timing header so framerate information is encoded -+ * in the H264 header. -+ */ -+ vchiq_mmal_port_parameter_set( -+ ctx->dev->instance, -+ &ctx->component->output[0], -+ MMAL_PARAMETER_VIDEO_ENCODE_SPS_TIMING, -+ ¶m, sizeof(param)); -+ - } else { - if (ctx->q_data[V4L2_M2M_DST].sizeimage < - ctx->component->output[0].minimum_buffer.size) diff --git a/target/linux/brcm2708/patches-4.19/950-0361-ASoC-tlv320aic32x4-Model-DAC-ADC-dividers-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0361-ASoC-tlv320aic32x4-Model-DAC-ADC-dividers-in-CCF.patch new file mode 100644 index 0000000000..fc671a4705 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0361-ASoC-tlv320aic32x4-Model-DAC-ADC-dividers-in-CCF.patch @@ -0,0 +1,306 @@ +From 3bf2e5984ab7acb4469ab0f3dfee8b7392001bbf Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:47 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Model DAC/ADC dividers in CCF + +commit a51b50062091619915c5155085bbe13a7aca6903 upstream. + +Model and manage DAC/ADC dividers as components in the Core +Clock Framework. This should allow us to do some more complex +clock management and power control. Also, some of the +on-board chip clocks can be exposed to the outside, and this +change will make those clocks easier to consume by other +parts of the kernel. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4-clk.c | 90 ++++++++++++++++++++++++ + sound/soc/codecs/tlv320aic32x4.c | 101 +++++++++++++++------------ + sound/soc/codecs/tlv320aic32x4.h | 4 ++ + 3 files changed, 151 insertions(+), 44 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4-clk.c ++++ b/sound/soc/codecs/tlv320aic32x4-clk.c +@@ -289,6 +289,68 @@ static const struct clk_ops aic32x4_code + .get_parent = clk_aic32x4_codec_clkin_get_parent, + }; + ++static int clk_aic32x4_div_prepare(struct clk_hw *hw) ++{ ++ struct clk_aic32x4 *div = to_clk_aic32x4(hw); ++ ++ return regmap_update_bits(div->regmap, div->reg, ++ AIC32X4_DIVEN, AIC32X4_DIVEN); ++} ++ ++static void clk_aic32x4_div_unprepare(struct clk_hw *hw) ++{ ++ struct clk_aic32x4 *div = to_clk_aic32x4(hw); ++ ++ regmap_update_bits(div->regmap, div->reg, ++ AIC32X4_DIVEN, 0); ++} ++ ++static int clk_aic32x4_div_set_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct clk_aic32x4 *div = to_clk_aic32x4(hw); ++ u8 divisor; ++ ++ divisor = DIV_ROUND_UP(parent_rate, rate); ++ if (divisor > 128) ++ return -EINVAL; ++ ++ return regmap_update_bits(div->regmap, div->reg, ++ AIC32X4_DIV_MASK, divisor); ++} ++ ++static long clk_aic32x4_div_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ unsigned long divisor; ++ ++ divisor = DIV_ROUND_UP(*parent_rate, rate); ++ if (divisor > 128) ++ return -EINVAL; ++ ++ return DIV_ROUND_UP(*parent_rate, divisor); ++} ++ ++static unsigned long clk_aic32x4_div_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct clk_aic32x4 *div = to_clk_aic32x4(hw); ++ ++ unsigned int val; ++ ++ regmap_read(div->regmap, div->reg, &val); ++ ++ return DIV_ROUND_UP(parent_rate, val & AIC32X4_DIV_MASK); ++} ++ ++static const struct clk_ops aic32x4_div_ops = { ++ .prepare = clk_aic32x4_div_prepare, ++ .unprepare = clk_aic32x4_div_unprepare, ++ .set_rate = clk_aic32x4_div_set_rate, ++ .round_rate = clk_aic32x4_div_round_rate, ++ .recalc_rate = clk_aic32x4_div_recalc_rate, ++}; ++ + static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { + { + .name = "pll", +@@ -306,6 +368,34 @@ static struct aic32x4_clkdesc aic32x4_cl + .ops = &aic32x4_codec_clkin_ops, + .reg = 0, + }, ++ { ++ .name = "ndac", ++ .parent_names = (const char * []) { "codec_clkin" }, ++ .num_parents = 1, ++ .ops = &aic32x4_div_ops, ++ .reg = AIC32X4_NDAC, ++ }, ++ { ++ .name = "mdac", ++ .parent_names = (const char * []) { "ndac" }, ++ .num_parents = 1, ++ .ops = &aic32x4_div_ops, ++ .reg = AIC32X4_MDAC, ++ }, ++ { ++ .name = "nadc", ++ .parent_names = (const char * []) { "codec_clkin" }, ++ .num_parents = 1, ++ .ops = &aic32x4_div_ops, ++ .reg = AIC32X4_NADC, ++ }, ++ { ++ .name = "madc", ++ .parent_names = (const char * []) { "nadc" }, ++ .num_parents = 1, ++ .ops = &aic32x4_div_ops, ++ .reg = AIC32X4_MADC, ++ }, + }; + + static struct clk *aic32x4_register_clk(struct device *dev, +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -52,11 +52,11 @@ struct aic32x4_rate_divs { + u32 rate; + unsigned long pll_rate; + u16 dosr; +- u8 ndac; +- u8 mdac; ++ unsigned long ndac_rate; ++ unsigned long mdac_rate; + u8 aosr; +- u8 nadc; +- u8 madc; ++ unsigned long nadc_rate; ++ unsigned long madc_rate; + u8 blck_N; + u8 r_block; + u8 p_block; +@@ -309,34 +309,54 @@ static const struct snd_kcontrol_new aic + + static const struct aic32x4_rate_divs aic32x4_divs[] = { + /* 8k rate */ +- { 12000000, 8000, 57120000, 768, 5, 3, 128, 5, 18, 24, 1, 1 }, +- { 24000000, 8000, 57120000, 768, 15, 1, 64, 45, 4, 24, 1, 1 }, +- { 25000000, 8000, 32620000, 768, 15, 1, 64, 45, 4, 24, 1, 1 }, ++ { 12000000, 8000, 57120000, 768, 18432000, 6144000, 128, 18432000, ++ 1024000, 24, 1, 1 }, ++ { 24000000, 8000, 57120000, 768, 6144000, 6144000, 64, 2048000, ++ 512000, 24, 1, 1 }, ++ { 25000000, 8000, 32620000, 768, 6144000, 6144000, 64, 2048000, ++ 512000, 24, 1, 1 }, + /* 11.025k rate */ +- { 12000000, 11025, 44217600, 512, 8, 2, 128, 8, 8, 16, 1, 1 }, +- { 24000000, 11025, 44217600, 512, 16, 1, 64, 32, 4, 16, 1, 1 }, ++ { 12000000, 11025, 44217600, 512, 11289600, 5644800, 128, 11289600, ++ 1411200, 16, 1, 1 }, ++ { 24000000, 11025, 44217600, 512, 5644800, 5644800, 64, 2822400, ++ 705600, 16, 1, 1 }, + /* 16k rate */ +- { 12000000, 16000, 57120000, 384, 5, 3, 128, 5, 9, 12, 1, 1 }, +- { 24000000, 16000, 57120000, 384, 15, 1, 64, 18, 5, 12, 1, 1 }, +- { 25000000, 16000, 32620000, 384, 15, 1, 64, 18, 5, 12, 1, 1 }, ++ { 12000000, 16000, 57120000, 384, 18432000, 6144000, 128, 18432000, ++ 2048000, 12, 1, 1 }, ++ { 24000000, 16000, 57120000, 384, 6144000, 6144000, 64, 5120000, ++ 1024000, 12, 1, 1 }, ++ { 25000000, 16000, 32620000, 384, 6144000, 6144000, 64, 5120000, ++ 1024000, 12, 1, 1 }, + /* 22.05k rate */ +- { 12000000, 22050, 44217600, 256, 4, 4, 128, 4, 8, 8, 1, 1 }, +- { 24000000, 22050, 44217600, 256, 16, 1, 64, 16, 4, 8, 1, 1 }, +- { 25000000, 22050, 19713750, 256, 16, 1, 64, 16, 4, 8, 1, 1 }, ++ { 12000000, 22050, 44217600, 256, 22579200, 5644800, 128, 22579200, ++ 2822400, 8, 1, 1 }, ++ { 24000000, 22050, 44217600, 256, 5644800, 5644800, 64, 5644800, ++ 1411200, 8, 1, 1 }, ++ { 25000000, 22050, 19713750, 256, 5644800, 5644800, 64, 5644800, ++ 1411200, 8, 1, 1 }, + /* 32k rate */ +- { 12000000, 32000, 14112000, 192, 2, 7, 64, 2, 21, 6, 1, 1 }, +- { 24000000, 32000, 14112000, 192, 7, 2, 64, 7, 6, 6, 1, 1 }, ++ { 12000000, 32000, 14112000, 192, 43008000, 6144000, 64, 43008000, ++ 2048000, 6, 1, 1 }, ++ { 24000000, 32000, 14112000, 192, 12288000, 6144000, 64, 12288000, ++ 2048000, 6, 1, 1 }, + /* 44.1k rate */ +- { 12000000, 44100, 44217600, 128, 2, 8, 128, 2, 8, 4, 1, 1 }, +- { 24000000, 44100, 44217600, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, +- { 25000000, 44100, 19713750, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, ++ { 12000000, 44100, 44217600, 128, 45158400, 5644800, 128, 45158400, ++ 5644800, 4, 1, 1 }, ++ { 24000000, 44100, 44217600, 128, 11289600, 5644800, 64, 11289600, ++ 2822400, 4, 1, 1 }, ++ { 25000000, 44100, 19713750, 128, 11289600, 5644800, 64, 11289600, ++ 2822400, 4, 1, 1 }, + /* 48k rate */ +- { 12000000, 48000, 18432000, 128, 2, 8, 128, 2, 8, 4, 1, 1 }, +- { 24000000, 48000, 18432000, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, +- { 25000000, 48000, 75626250, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, ++ { 12000000, 48000, 18432000, 128, 49152000, 6144000, 128, 49152000, ++ 6144000, 4, 1, 1 }, ++ { 24000000, 48000, 18432000, 128, 12288000, 6144000, 64, 12288000, ++ 3072000, 4, 1, 1 }, ++ { 25000000, 48000, 75626250, 128, 12288000, 6144000, 64, 12288000, ++ 3072000, 4, 1, 1 }, + + /* 96k rate */ +- { 25000000, 96000, 75626250, 64, 4, 4, 64, 4, 4, 1, 1, 9 }, ++ { 25000000, 96000, 75626250, 64, 24576000, 6144000, 64, 24576000, ++ 6144000, 1, 1, 9 }, + }; + + static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { +@@ -721,6 +741,10 @@ static int aic32x4_setup_clocks(struct s + + struct clk_bulk_data clocks[] = { + { .id = "pll" }, ++ { .id = "nadc" }, ++ { .id = "madc" }, ++ { .id = "ndac" }, ++ { .id = "mdac" }, + }; + + i = aic32x4_get_divs(parent_rate, sample_rate); +@@ -733,7 +757,11 @@ static int aic32x4_setup_clocks(struct s + if (ret) + return ret; + +- clk_set_rate(clocks[0].clk, sample_rate); ++ clk_set_rate(clocks[0].clk, aic32x4_divs[i].pll_rate); ++ clk_set_rate(clocks[1].clk, aic32x4_divs[i].nadc_rate); ++ clk_set_rate(clocks[2].clk, aic32x4_divs[i].madc_rate); ++ clk_set_rate(clocks[3].clk, aic32x4_divs[i].ndac_rate); ++ clk_set_rate(clocks[4].clk, aic32x4_divs[i].mdac_rate); + + aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); + +@@ -742,26 +770,10 @@ static int aic32x4_setup_clocks(struct s + AIC32X4_BDIVCLK_MASK, + AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); + +- /* NDAC divider value */ +- snd_soc_component_update_bits(component, AIC32X4_NDAC, +- AIC32X4_NDAC_MASK, aic32x4_divs[i].ndac); +- +- /* MDAC divider value */ +- snd_soc_component_update_bits(component, AIC32X4_MDAC, +- AIC32X4_MDAC_MASK, aic32x4_divs[i].mdac); +- + /* DOSR MSB & LSB values */ + snd_soc_component_write(component, AIC32X4_DOSRMSB, aic32x4_divs[i].dosr >> 8); + snd_soc_component_write(component, AIC32X4_DOSRLSB, (aic32x4_divs[i].dosr & 0xff)); + +- /* NADC divider value */ +- snd_soc_component_update_bits(component, AIC32X4_NADC, +- AIC32X4_NADC_MASK, aic32x4_divs[i].nadc); +- +- /* MADC divider value */ +- snd_soc_component_update_bits(component, AIC32X4_MADC, +- AIC32X4_MADC_MASK, aic32x4_divs[i].madc); +- + /* AOSR value */ + snd_soc_component_write(component, AIC32X4_AOSR, aic32x4_divs[i].aosr); + +@@ -773,8 +785,8 @@ static int aic32x4_setup_clocks(struct s + } + + static int aic32x4_hw_params(struct snd_pcm_substream *substream, +- struct snd_pcm_hw_params *params, +- struct snd_soc_dai *dai) ++ struct snd_pcm_hw_params *params, ++ struct snd_soc_dai *dai) + { + struct snd_soc_component *component = dai->component; + struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); +@@ -989,7 +1001,8 @@ static int aic32x4_component_probe(struc + int ret; + + struct clk_bulk_data clocks[] = { +- { .id = "codec_clkin" }, ++ { .id = "codec_clkin" }, ++ { .id = "pll" }, + }; + + ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); +--- a/sound/soc/codecs/tlv320aic32x4.h ++++ b/sound/soc/codecs/tlv320aic32x4.h +@@ -206,6 +206,10 @@ int aic32x4_register_clocks(struct devic + #define AIC32X4_RMICPGANIN_IN1L_10K 0x10 + #define AIC32X4_RMICPGANIN_CM1R_10K 0x40 + ++/* Common mask and enable for all of the dividers */ ++#define AIC32X4_DIVEN BIT(7) ++#define AIC32X4_DIV_MASK GENMASK(6, 0) ++ + /* Clock Limits */ + #define AIC32X4_MAX_PLL_CLKIN 20000000 + diff --git a/target/linux/brcm2708/patches-4.19/950-0361-drm-vc4-Don-t-wait-for-vblank-on-fkms-cursor-updates.patch b/target/linux/brcm2708/patches-4.19/950-0361-drm-vc4-Don-t-wait-for-vblank-on-fkms-cursor-updates.patch deleted file mode 100644 index cbaffb4648..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0361-drm-vc4-Don-t-wait-for-vblank-on-fkms-cursor-updates.patch +++ /dev/null @@ -1,28 +0,0 @@ -From dd5fa07672eb01a4d90dfa39a4c54eaa0e086386 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 5 Feb 2018 18:53:18 +0000 -Subject: [PATCH 361/806] drm/vc4: Don't wait for vblank on fkms cursor - updates. - -We don't use the same async update path between fkms and normal kms, -and the normal kms workaround ended up making us wait. This became a -larger problem in rpi-4.14.y, as the USB HID update rate throttling -got (accidentally?) dropped. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_kms.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_kms.c -@@ -222,7 +222,8 @@ static int vc4_atomic_commit(struct drm_ - * drm_atomic_helper_setup_commit() from auto-completing - * commit->flip_done. - */ -- state->legacy_cursor_update = false; -+ if (!vc4->firmware_kms) -+ state->legacy_cursor_update = false; - ret = drm_atomic_helper_setup_commit(state, nonblock); - if (ret) - return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0362-ASoC-tlv320aic32x4-Model-BDIV-divider-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0362-ASoC-tlv320aic32x4-Model-BDIV-divider-in-CCF.patch new file mode 100644 index 0000000000..708e449275 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0362-ASoC-tlv320aic32x4-Model-BDIV-divider-in-CCF.patch @@ -0,0 +1,210 @@ +From 69f3f8c51077d0f3dc7f46c2c9a94da899d8eb7c Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:48 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Model BDIV divider in CCF + +commit 9b484124ebd906c4d6bc826cc0d417e80cc1105c upstream. + +Model and manage BDIV divider as components in the Core +Clock Framework. This should allow us to do some more complex +clock management and power control. Also, some of the +on-board chip clocks can be exposed to the outside, and this +change will make those clocks easier to consume by other +parts of the kernel. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4-clk.c | 36 ++++++++++++++++++ + sound/soc/codecs/tlv320aic32x4.c | 56 +++++++++++++--------------- + 2 files changed, 62 insertions(+), 30 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4-clk.c ++++ b/sound/soc/codecs/tlv320aic32x4-clk.c +@@ -351,6 +351,34 @@ static const struct clk_ops aic32x4_div_ + .recalc_rate = clk_aic32x4_div_recalc_rate, + }; + ++static int clk_aic32x4_bdiv_set_parent(struct clk_hw *hw, u8 index) ++{ ++ struct clk_aic32x4 *mux = to_clk_aic32x4(hw); ++ ++ return regmap_update_bits(mux->regmap, AIC32X4_IFACE3, ++ AIC32X4_BDIVCLK_MASK, index); ++} ++ ++static u8 clk_aic32x4_bdiv_get_parent(struct clk_hw *hw) ++{ ++ struct clk_aic32x4 *mux = to_clk_aic32x4(hw); ++ unsigned int val; ++ ++ regmap_read(mux->regmap, AIC32X4_IFACE3, &val); ++ ++ return val & AIC32X4_BDIVCLK_MASK; ++} ++ ++static const struct clk_ops aic32x4_bdiv_ops = { ++ .prepare = clk_aic32x4_div_prepare, ++ .unprepare = clk_aic32x4_div_unprepare, ++ .set_parent = clk_aic32x4_bdiv_set_parent, ++ .get_parent = clk_aic32x4_bdiv_get_parent, ++ .set_rate = clk_aic32x4_div_set_rate, ++ .round_rate = clk_aic32x4_div_round_rate, ++ .recalc_rate = clk_aic32x4_div_recalc_rate, ++}; ++ + static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { + { + .name = "pll", +@@ -396,6 +424,14 @@ static struct aic32x4_clkdesc aic32x4_cl + .ops = &aic32x4_div_ops, + .reg = AIC32X4_MADC, + }, ++ { ++ .name = "bdiv", ++ .parent_names = ++ (const char *[]) { "ndac", "mdac", "nadc", "madc" }, ++ .num_parents = 4, ++ .ops = &aic32x4_bdiv_ops, ++ .reg = AIC32X4_BCLKN, ++ }, + }; + + static struct clk *aic32x4_register_clk(struct device *dev, +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -57,7 +57,7 @@ struct aic32x4_rate_divs { + u8 aosr; + unsigned long nadc_rate; + unsigned long madc_rate; +- u8 blck_N; ++ unsigned long bdiv_rate; + u8 r_block; + u8 p_block; + }; +@@ -310,53 +310,53 @@ static const struct snd_kcontrol_new aic + static const struct aic32x4_rate_divs aic32x4_divs[] = { + /* 8k rate */ + { 12000000, 8000, 57120000, 768, 18432000, 6144000, 128, 18432000, +- 1024000, 24, 1, 1 }, ++ 1024000, 256000, 1, 1 }, + { 24000000, 8000, 57120000, 768, 6144000, 6144000, 64, 2048000, +- 512000, 24, 1, 1 }, ++ 512000, 256000, 1, 1 }, + { 25000000, 8000, 32620000, 768, 6144000, 6144000, 64, 2048000, +- 512000, 24, 1, 1 }, ++ 512000, 256000, 1, 1 }, + /* 11.025k rate */ + { 12000000, 11025, 44217600, 512, 11289600, 5644800, 128, 11289600, +- 1411200, 16, 1, 1 }, ++ 1411200, 352800, 1, 1 }, + { 24000000, 11025, 44217600, 512, 5644800, 5644800, 64, 2822400, +- 705600, 16, 1, 1 }, ++ 705600, 352800, 1, 1 }, + /* 16k rate */ + { 12000000, 16000, 57120000, 384, 18432000, 6144000, 128, 18432000, +- 2048000, 12, 1, 1 }, ++ 2048000, 512000, 1, 1 }, + { 24000000, 16000, 57120000, 384, 6144000, 6144000, 64, 5120000, +- 1024000, 12, 1, 1 }, ++ 1024000, 512000, 1, 1 }, + { 25000000, 16000, 32620000, 384, 6144000, 6144000, 64, 5120000, +- 1024000, 12, 1, 1 }, ++ 1024000, 512000, 1, 1 }, + /* 22.05k rate */ + { 12000000, 22050, 44217600, 256, 22579200, 5644800, 128, 22579200, +- 2822400, 8, 1, 1 }, ++ 2822400, 705600, 1, 1 }, + { 24000000, 22050, 44217600, 256, 5644800, 5644800, 64, 5644800, +- 1411200, 8, 1, 1 }, ++ 1411200, 705600, 1, 1 }, + { 25000000, 22050, 19713750, 256, 5644800, 5644800, 64, 5644800, +- 1411200, 8, 1, 1 }, ++ 1411200, 705600, 1, 1 }, + /* 32k rate */ + { 12000000, 32000, 14112000, 192, 43008000, 6144000, 64, 43008000, +- 2048000, 6, 1, 1 }, ++ 2048000, 1024000, 1, 1 }, + { 24000000, 32000, 14112000, 192, 12288000, 6144000, 64, 12288000, +- 2048000, 6, 1, 1 }, ++ 2048000, 1024000, 1, 1 }, + /* 44.1k rate */ + { 12000000, 44100, 44217600, 128, 45158400, 5644800, 128, 45158400, +- 5644800, 4, 1, 1 }, ++ 5644800, 1411200, 1, 1 }, + { 24000000, 44100, 44217600, 128, 11289600, 5644800, 64, 11289600, +- 2822400, 4, 1, 1 }, ++ 2822400, 1411200, 1, 1 }, + { 25000000, 44100, 19713750, 128, 11289600, 5644800, 64, 11289600, +- 2822400, 4, 1, 1 }, ++ 2822400, 1411200, 1, 1 }, + /* 48k rate */ + { 12000000, 48000, 18432000, 128, 49152000, 6144000, 128, 49152000, +- 6144000, 4, 1, 1 }, ++ 6144000, 1536000, 1, 1 }, + { 24000000, 48000, 18432000, 128, 12288000, 6144000, 64, 12288000, +- 3072000, 4, 1, 1 }, ++ 3072000, 1536000, 1, 1 }, + { 25000000, 48000, 75626250, 128, 12288000, 6144000, 64, 12288000, +- 3072000, 4, 1, 1 }, ++ 3072000, 1536000, 1, 1 }, + + /* 96k rate */ + { 25000000, 96000, 75626250, 64, 24576000, 6144000, 64, 24576000, +- 6144000, 1, 1, 9 }, ++ 6144000, 3072000, 1, 9 }, + }; + + static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { +@@ -745,6 +745,7 @@ static int aic32x4_setup_clocks(struct s + { .id = "madc" }, + { .id = "ndac" }, + { .id = "mdac" }, ++ { .id = "bdiv" }, + }; + + i = aic32x4_get_divs(parent_rate, sample_rate); +@@ -762,14 +763,10 @@ static int aic32x4_setup_clocks(struct s + clk_set_rate(clocks[2].clk, aic32x4_divs[i].madc_rate); + clk_set_rate(clocks[3].clk, aic32x4_divs[i].ndac_rate); + clk_set_rate(clocks[4].clk, aic32x4_divs[i].mdac_rate); ++ clk_set_rate(clocks[5].clk, aic32x4_divs[i].bdiv_rate); + + aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); + +- /* DAC_MOD_CLK as BDIV_CLKIN */ +- snd_soc_component_update_bits(component, AIC32X4_IFACE3, +- AIC32X4_BDIVCLK_MASK, +- AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); +- + /* DOSR MSB & LSB values */ + snd_soc_component_write(component, AIC32X4_DOSRMSB, aic32x4_divs[i].dosr >> 8); + snd_soc_component_write(component, AIC32X4_DOSRLSB, (aic32x4_divs[i].dosr & 0xff)); +@@ -777,10 +774,6 @@ static int aic32x4_setup_clocks(struct s + /* AOSR value */ + snd_soc_component_write(component, AIC32X4_AOSR, aic32x4_divs[i].aosr); + +- /* BCLK N divider */ +- snd_soc_component_update_bits(component, AIC32X4_BCLKN, +- AIC32X4_BCLK_MASK, aic32x4_divs[i].blck_N); +- + return 0; + } + +@@ -1003,6 +996,8 @@ static int aic32x4_component_probe(struc + struct clk_bulk_data clocks[] = { + { .id = "codec_clkin" }, + { .id = "pll" }, ++ { .id = "bdiv" }, ++ { .id = "mdac" }, + }; + + ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); +@@ -1020,6 +1015,7 @@ static int aic32x4_component_probe(struc + aic32x4_setup_gpios(component); + + clk_set_parent(clocks[0].clk, clocks[1].clk); ++ clk_set_parent(clocks[2].clk, clocks[3].clk); + + /* Power platform configuration */ + if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { diff --git a/target/linux/brcm2708/patches-4.19/950-0362-Fix-for-Pisound-kernel-module-in-Real-Time-kernel-co.patch b/target/linux/brcm2708/patches-4.19/950-0362-Fix-for-Pisound-kernel-module-in-Real-Time-kernel-co.patch deleted file mode 100644 index ce36179bc3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0362-Fix-for-Pisound-kernel-module-in-Real-Time-kernel-co.patch +++ /dev/null @@ -1,38 +0,0 @@ -From c93b0344d24ba63e0e4caeb693a9fcb7320aae3a Mon Sep 17 00:00:00 2001 -From: Giedrius -Date: Wed, 27 Feb 2019 14:27:28 +0000 -Subject: [PATCH 362/806] Fix for Pisound kernel module in Real Time kernel - configuration. - -When handler of data_available interrupt is fired, queue_work ends up -getting called and it can block on a spin lock which is not allowed in -interrupt context. The fix was to run the handler from a thread context -instead. ---- - sound/soc/bcm/pisound.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/sound/soc/bcm/pisound.c -+++ b/sound/soc/bcm/pisound.c -@@ -1,6 +1,6 @@ - /* - * Pisound Linux kernel module. -- * Copyright (C) 2016-2017 Vilniaus Blokas UAB, https://blokas.io/pisound -+ * Copyright (C) 2016-2019 Vilniaus Blokas UAB, https://blokas.io/pisound - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License -@@ -532,10 +532,10 @@ static void pisnd_spi_gpio_uninit(void) - - static int pisnd_spi_gpio_irq_init(struct device *dev) - { -- return request_irq( -- gpiod_to_irq(data_available), -+ return request_threaded_irq( -+ gpiod_to_irq(data_available), NULL, - data_available_interrupt_handler, -- IRQF_TIMER | IRQF_TRIGGER_RISING, -+ IRQF_TIMER | IRQF_TRIGGER_RISING | IRQF_ONESHOT, - "data_available_int", - NULL - ); diff --git a/target/linux/brcm2708/patches-4.19/950-0363-ASoC-tlv320aic32x4-Control-clock-gating-with-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0363-ASoC-tlv320aic32x4-Control-clock-gating-with-CCF.patch new file mode 100644 index 0000000000..c056c34ad7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0363-ASoC-tlv320aic32x4-Control-clock-gating-with-CCF.patch @@ -0,0 +1,109 @@ +From f844ea32cba0c4030594a0f590725477a5751f32 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:49 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Control clock gating with CCF + +commit d25970b5fd51e9fcf0afbe190908ea4049454da4 upstream. + +Control the clock gating to the various clock components to use +the CCF. This allows us to prepare_enalbe only 3 clocks and the +relationships assigned to them will cause upstream clockss to +enable automatically. Additionally we can do this in a single +call to the CCF. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 67 +++++++------------------------- + 1 file changed, 13 insertions(+), 54 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -836,41 +836,25 @@ static int aic32x4_mute(struct snd_soc_d + static int aic32x4_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) + { +- struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); + int ret; + ++ struct clk_bulk_data clocks[] = { ++ { .id = "madc" }, ++ { .id = "mdac" }, ++ { .id = "bdiv" }, ++ }; ++ ++ ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); ++ if (ret) ++ return ret; ++ + switch (level) { + case SND_SOC_BIAS_ON: +- /* Switch on master clock */ +- ret = clk_prepare_enable(aic32x4->mclk); ++ ret = clk_bulk_prepare_enable(ARRAY_SIZE(clocks), clocks); + if (ret) { +- dev_err(component->dev, "Failed to enable master clock\n"); ++ dev_err(component->dev, "Failed to enable clocks\n"); + return ret; + } +- +- /* Switch on PLL */ +- snd_soc_component_update_bits(component, AIC32X4_PLLPR, +- AIC32X4_PLLEN, AIC32X4_PLLEN); +- +- /* Switch on NDAC Divider */ +- snd_soc_component_update_bits(component, AIC32X4_NDAC, +- AIC32X4_NDACEN, AIC32X4_NDACEN); +- +- /* Switch on MDAC Divider */ +- snd_soc_component_update_bits(component, AIC32X4_MDAC, +- AIC32X4_MDACEN, AIC32X4_MDACEN); +- +- /* Switch on NADC Divider */ +- snd_soc_component_update_bits(component, AIC32X4_NADC, +- AIC32X4_NADCEN, AIC32X4_NADCEN); +- +- /* Switch on MADC Divider */ +- snd_soc_component_update_bits(component, AIC32X4_MADC, +- AIC32X4_MADCEN, AIC32X4_MADCEN); +- +- /* Switch on BCLK_N Divider */ +- snd_soc_component_update_bits(component, AIC32X4_BCLKN, +- AIC32X4_BCLKEN, AIC32X4_BCLKEN); + break; + case SND_SOC_BIAS_PREPARE: + break; +@@ -879,32 +863,7 @@ static int aic32x4_set_bias_level(struct + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) + break; + +- /* Switch off BCLK_N Divider */ +- snd_soc_component_update_bits(component, AIC32X4_BCLKN, +- AIC32X4_BCLKEN, 0); +- +- /* Switch off MADC Divider */ +- snd_soc_component_update_bits(component, AIC32X4_MADC, +- AIC32X4_MADCEN, 0); +- +- /* Switch off NADC Divider */ +- snd_soc_component_update_bits(component, AIC32X4_NADC, +- AIC32X4_NADCEN, 0); +- +- /* Switch off MDAC Divider */ +- snd_soc_component_update_bits(component, AIC32X4_MDAC, +- AIC32X4_MDACEN, 0); +- +- /* Switch off NDAC Divider */ +- snd_soc_component_update_bits(component, AIC32X4_NDAC, +- AIC32X4_NDACEN, 0); +- +- /* Switch off PLL */ +- snd_soc_component_update_bits(component, AIC32X4_PLLPR, +- AIC32X4_PLLEN, 0); +- +- /* Switch off master clock */ +- clk_disable_unprepare(aic32x4->mclk); ++ clk_bulk_disable_unprepare(ARRAY_SIZE(clocks), clocks); + break; + case SND_SOC_BIAS_OFF: + break; diff --git a/target/linux/brcm2708/patches-4.19/950-0364-ASoC-tlv320aic32x4-Move-aosr-and-dosr-setting-to-sep.patch b/target/linux/brcm2708/patches-4.19/950-0364-ASoC-tlv320aic32x4-Move-aosr-and-dosr-setting-to-sep.patch new file mode 100644 index 0000000000..85b008e5a4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0364-ASoC-tlv320aic32x4-Move-aosr-and-dosr-setting-to-sep.patch @@ -0,0 +1,58 @@ +From a2d8d212b986e4a4ae52c748d246e4c28ebaf1bc Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:50 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Move aosr and dosr setting to + separate functions + +commit fbafbf6517274a797e6e6508c18dd8dba5920c89 upstream. + +Move these to separate helper functions. This looks cleaner and fits +better with the new clock setting in CCF. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 24 +++++++++++++++++------- + 1 file changed, 17 insertions(+), 7 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -720,6 +720,20 @@ static int aic32x4_set_dai_fmt(struct sn + return 0; + } + ++static int aic32x4_set_aosr(struct snd_soc_component *component, u8 aosr) ++{ ++ return snd_soc_component_write(component, AIC32X4_AOSR, aosr); ++} ++ ++static int aic32x4_set_dosr(struct snd_soc_component *component, u16 dosr) ++{ ++ snd_soc_component_write(component, AIC32X4_DOSRMSB, dosr >> 8); ++ snd_soc_component_write(component, AIC32X4_DOSRLSB, ++ (dosr & 0xff)); ++ ++ return 0; ++} ++ + static int aic32x4_set_processing_blocks(struct snd_soc_component *component, + u8 r_block, u8 p_block) + { +@@ -765,14 +779,10 @@ static int aic32x4_setup_clocks(struct s + clk_set_rate(clocks[4].clk, aic32x4_divs[i].mdac_rate); + clk_set_rate(clocks[5].clk, aic32x4_divs[i].bdiv_rate); + +- aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); ++ aic32x4_set_aosr(component, aic32x4_divs[i].aosr); ++ aic32x4_set_dosr(component, aic32x4_divs[i].dosr); + +- /* DOSR MSB & LSB values */ +- snd_soc_component_write(component, AIC32X4_DOSRMSB, aic32x4_divs[i].dosr >> 8); +- snd_soc_component_write(component, AIC32X4_DOSRLSB, (aic32x4_divs[i].dosr & 0xff)); +- +- /* AOSR value */ +- snd_soc_component_write(component, AIC32X4_AOSR, aic32x4_divs[i].aosr); ++ aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); + + return 0; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0364-Added-mute-stream-func.patch b/target/linux/brcm2708/patches-4.19/950-0364-Added-mute-stream-func.patch deleted file mode 100644 index d700348551..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0364-Added-mute-stream-func.patch +++ /dev/null @@ -1,146 +0,0 @@ -From 193dc2529db3cfee676aae2b18f059363e151e09 Mon Sep 17 00:00:00 2001 -From: Jaikumar -Date: Thu, 7 Jun 2018 21:22:45 +0530 -Subject: [PATCH 364/806] Added mute stream func - -Signed-off-by: Jaikumar ---- - sound/soc/bcm/allo-katana-codec.c | 60 ++++++++++++++++++++++--------- - 1 file changed, 44 insertions(+), 16 deletions(-) - ---- a/sound/soc/bcm/allo-katana-codec.c -+++ b/sound/soc/bcm/allo-katana-codec.c -@@ -31,21 +31,23 @@ - - #define KATANA_CODEC_CHIP_ID 0x30 - #define KATANA_CODEC_VIRT_BASE 0x100 --#define KATANA_CODEC_PAGE 0 -+#define KATANA_CODEC_PAGE 0 - - #define KATANA_CODEC_CHIP_ID_REG (KATANA_CODEC_VIRT_BASE + 0) --#define KATANA_CODEC_RESET (KATANA_CODEC_VIRT_BASE + 1) -+#define KATANA_CODEC_RESET (KATANA_CODEC_VIRT_BASE + 1) - #define KATANA_CODEC_VOLUME_1 (KATANA_CODEC_VIRT_BASE + 2) - #define KATANA_CODEC_VOLUME_2 (KATANA_CODEC_VIRT_BASE + 3) --#define KATANA_CODEC_MUTE (KATANA_CODEC_VIRT_BASE + 4) -+#define KATANA_CODEC_MUTE (KATANA_CODEC_VIRT_BASE + 4) - #define KATANA_CODEC_DSP_PROGRAM (KATANA_CODEC_VIRT_BASE + 5) - #define KATANA_CODEC_DEEMPHASIS (KATANA_CODEC_VIRT_BASE + 6) --#define KATANA_CODEC_DOP (KATANA_CODEC_VIRT_BASE + 7) --#define KATANA_CODEC_FORMAT (KATANA_CODEC_VIRT_BASE + 8) -+#define KATANA_CODEC_DOP (KATANA_CODEC_VIRT_BASE + 7) -+#define KATANA_CODEC_FORMAT (KATANA_CODEC_VIRT_BASE + 8) - #define KATANA_CODEC_COMMAND (KATANA_CODEC_VIRT_BASE + 9) --#define KATANA_CODEC_MAX_REGISTER (KATANA_CODEC_VIRT_BASE + 9) -+#define KATANA_CODEC_MUTE_STREAM (KATANA_CODEC_VIRT_BASE + 10) - --#define KATANA_CODEC_FMT 0xff -+#define KATANA_CODEC_MAX_REGISTER (KATANA_CODEC_VIRT_BASE + 10) -+ -+#define KATANA_CODEC_FMT 0xff - #define KATANA_CODEC_CHAN_MONO 0x00 - #define KATANA_CODEC_CHAN_STEREO 0x80 - #define KATANA_CODEC_ALEN_16 0x10 -@@ -135,7 +137,8 @@ static const struct snd_kcontrol_new kat - SOC_SINGLE("DoP Playback Switch", KATANA_CODEC_DOP, 0, 1, 1) - }; - --static bool katana_codec_readable_register(struct device *dev, unsigned int reg) -+static bool katana_codec_readable_register(struct device *dev, -+ unsigned int reg) - { - switch (reg) { - case KATANA_CODEC_CHIP_ID_REG: -@@ -150,13 +153,15 @@ static int katana_codec_hw_params(struct - struct snd_soc_dai *dai) - { - struct snd_soc_component *component = dai->component; -- struct katana_codec_priv *katana_codec = snd_soc_component_get_drvdata(component); -+ struct katana_codec_priv *katana_codec = -+ snd_soc_component_get_drvdata(component); - int fmt = 0; - int ret; - -- dev_dbg(component->card->dev, "hw_params %u Hz, %u channels\n", -+ dev_dbg(component->card->dev, "hw_params %u Hz, %u channels, %u bits\n", - params_rate(params), -- params_channels(params)); -+ params_channels(params), -+ params_width(params)); - - switch (katana_codec->fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBM_CFM: // master -@@ -212,13 +217,17 @@ static int katana_codec_hw_params(struct - return -EINVAL; - } - -- ret = regmap_write(katana_codec->regmap, KATANA_CODEC_FORMAT, fmt); -+ ret = regmap_write(katana_codec->regmap, KATANA_CODEC_FORMAT, -+ fmt); - if (ret != 0) { - dev_err(component->card->dev, "Failed to set format: %d\n", ret); - return ret; - } - break; - -+ case SND_SOC_DAIFMT_CBS_CFS: -+ break; -+ - default: - return -EINVAL; - } -@@ -229,14 +238,33 @@ static int katana_codec_hw_params(struct - static int katana_codec_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) - { - struct snd_soc_component *component = dai->component; -- struct katana_codec_priv *katana_codec = snd_soc_component_get_drvdata(component); -+ struct katana_codec_priv *katana_codec = -+ snd_soc_component_get_drvdata(component); - - katana_codec->fmt = fmt; - - return 0; - } - -+int katana_codec_dai_mute_stream(struct snd_soc_dai *dai, int mute, -+ int stream) -+{ -+ struct snd_soc_component *component = dai->component; -+ struct katana_codec_priv *katana_codec = -+ snd_soc_component_get_drvdata(component); -+ int ret = 0; -+ -+ ret = regmap_write(katana_codec->regmap, KATANA_CODEC_MUTE_STREAM, -+ mute); -+ if (ret != 0) { -+ dev_err(component->card->dev, "Failed to set mute: %d\n", ret); -+ return ret; -+ } -+ return ret; -+} -+ - static const struct snd_soc_dai_ops katana_codec_dai_ops = { -+ .mute_stream = katana_codec_dai_mute_stream, - .hw_params = katana_codec_hw_params, - .set_fmt = katana_codec_set_fmt, - }; -@@ -300,7 +328,7 @@ static int allo_katana_component_probe(s - return PTR_ERR(regmap); - - katana_codec = devm_kzalloc(dev, sizeof(struct katana_codec_priv), -- GFP_KERNEL); -+ GFP_KERNEL); - if (!katana_codec) - return -ENOMEM; - -@@ -348,8 +376,8 @@ static struct i2c_driver allo_katana_com - .remove = allo_katana_component_remove, - .id_table = allo_katana_component_id, - .driver = { -- .name = "allo-katana-codec", -- .of_match_table = allo_katana_codec_of_match, -+ .name = "allo-katana-codec", -+ .of_match_table = allo_katana_codec_of_match, - }, - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0365-ASoC-tlv320aic32x4-Dynamically-Determine-Clocking.patch b/target/linux/brcm2708/patches-4.19/950-0365-ASoC-tlv320aic32x4-Dynamically-Determine-Clocking.patch new file mode 100644 index 0000000000..94552065eb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0365-ASoC-tlv320aic32x4-Dynamically-Determine-Clocking.patch @@ -0,0 +1,285 @@ +From 3e62c56daa1c799bb2a1d954ecfb88e8d37421bb Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:51 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Dynamically Determine Clocking + +commit 96c3bb00239de4fb5f4ddca42c1f90d6d9b3c697 upstream. + +The existing code uses a static lookup table to determine the +settings of the various clock devices on board the chip. This is +limiting in a couple of ways. First, this doesn't allow for any +master clock rates other than the three that have been +precalculated. Additionally, new sample rates are difficult to +add to the table. Witness that the chip is capable of 192000 Hz +sampling, but it is not provided by this driver. Last, if the +driver is clocked by something that isn't a crystal, the +upstream clock may not be able to achieve exactly the rate +requested in the driver. This will mean that clocking will be +slightly off for the sampling clock or that it won't work at all. + +This patch determines the settings for all of the clocks at +runtime considering the real conditions of the clocks in the +system. The rules for the clocks are in TI's SLAA557 application +guide on pages 37, 51 and 77. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 190 ++++++++++++++----------------- + sound/soc/codecs/tlv320aic32x4.h | 4 +- + 2 files changed, 90 insertions(+), 104 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -47,21 +47,6 @@ + + #include "tlv320aic32x4.h" + +-struct aic32x4_rate_divs { +- u32 mclk; +- u32 rate; +- unsigned long pll_rate; +- u16 dosr; +- unsigned long ndac_rate; +- unsigned long mdac_rate; +- u8 aosr; +- unsigned long nadc_rate; +- unsigned long madc_rate; +- unsigned long bdiv_rate; +- u8 r_block; +- u8 p_block; +-}; +- + struct aic32x4_priv { + struct regmap *regmap; + u32 sysclk; +@@ -307,58 +292,6 @@ static const struct snd_kcontrol_new aic + 0, 0x0F, 0), + }; + +-static const struct aic32x4_rate_divs aic32x4_divs[] = { +- /* 8k rate */ +- { 12000000, 8000, 57120000, 768, 18432000, 6144000, 128, 18432000, +- 1024000, 256000, 1, 1 }, +- { 24000000, 8000, 57120000, 768, 6144000, 6144000, 64, 2048000, +- 512000, 256000, 1, 1 }, +- { 25000000, 8000, 32620000, 768, 6144000, 6144000, 64, 2048000, +- 512000, 256000, 1, 1 }, +- /* 11.025k rate */ +- { 12000000, 11025, 44217600, 512, 11289600, 5644800, 128, 11289600, +- 1411200, 352800, 1, 1 }, +- { 24000000, 11025, 44217600, 512, 5644800, 5644800, 64, 2822400, +- 705600, 352800, 1, 1 }, +- /* 16k rate */ +- { 12000000, 16000, 57120000, 384, 18432000, 6144000, 128, 18432000, +- 2048000, 512000, 1, 1 }, +- { 24000000, 16000, 57120000, 384, 6144000, 6144000, 64, 5120000, +- 1024000, 512000, 1, 1 }, +- { 25000000, 16000, 32620000, 384, 6144000, 6144000, 64, 5120000, +- 1024000, 512000, 1, 1 }, +- /* 22.05k rate */ +- { 12000000, 22050, 44217600, 256, 22579200, 5644800, 128, 22579200, +- 2822400, 705600, 1, 1 }, +- { 24000000, 22050, 44217600, 256, 5644800, 5644800, 64, 5644800, +- 1411200, 705600, 1, 1 }, +- { 25000000, 22050, 19713750, 256, 5644800, 5644800, 64, 5644800, +- 1411200, 705600, 1, 1 }, +- /* 32k rate */ +- { 12000000, 32000, 14112000, 192, 43008000, 6144000, 64, 43008000, +- 2048000, 1024000, 1, 1 }, +- { 24000000, 32000, 14112000, 192, 12288000, 6144000, 64, 12288000, +- 2048000, 1024000, 1, 1 }, +- /* 44.1k rate */ +- { 12000000, 44100, 44217600, 128, 45158400, 5644800, 128, 45158400, +- 5644800, 1411200, 1, 1 }, +- { 24000000, 44100, 44217600, 128, 11289600, 5644800, 64, 11289600, +- 2822400, 1411200, 1, 1 }, +- { 25000000, 44100, 19713750, 128, 11289600, 5644800, 64, 11289600, +- 2822400, 1411200, 1, 1 }, +- /* 48k rate */ +- { 12000000, 48000, 18432000, 128, 49152000, 6144000, 128, 49152000, +- 6144000, 1536000, 1, 1 }, +- { 24000000, 48000, 18432000, 128, 12288000, 6144000, 64, 12288000, +- 3072000, 1536000, 1, 1 }, +- { 25000000, 48000, 75626250, 128, 12288000, 6144000, 64, 12288000, +- 3072000, 1536000, 1, 1 }, +- +- /* 96k rate */ +- { 25000000, 96000, 75626250, 64, 24576000, 6144000, 64, 24576000, +- 6144000, 3072000, 1, 9 }, +-}; +- + static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { + SOC_DAPM_SINGLE("L_DAC Switch", AIC32X4_HPLROUTE, 3, 1, 0), + SOC_DAPM_SINGLE("IN1_L Switch", AIC32X4_HPLROUTE, 2, 1, 0), +@@ -632,20 +565,6 @@ const struct regmap_config aic32x4_regma + }; + EXPORT_SYMBOL(aic32x4_regmap_config); + +-static inline int aic32x4_get_divs(int mclk, int rate) +-{ +- int i; +- +- for (i = 0; i < ARRAY_SIZE(aic32x4_divs); i++) { +- if ((aic32x4_divs[i].rate == rate) +- && (aic32x4_divs[i].mclk == mclk)) { +- return i; +- } +- } +- printk(KERN_ERR "aic32x4: master clock and sample rate is not supported\n"); +- return -EINVAL; +-} +- + static int aic32x4_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) + { +@@ -747,11 +666,17 @@ static int aic32x4_set_processing_blocks + } + + static int aic32x4_setup_clocks(struct snd_soc_component *component, +- unsigned int sample_rate, +- unsigned int parent_rate) ++ unsigned int sample_rate) + { +- int i; ++ u8 aosr; ++ u16 dosr; ++ u8 adc_resource_class, dac_resource_class; ++ u8 madc, nadc, mdac, ndac, max_nadc, min_mdac, max_ndac; ++ u8 dosr_increment; ++ u16 max_dosr, min_dosr; ++ unsigned long mclk_rate, adc_clock_rate, dac_clock_rate; + int ret; ++ struct clk *mclk; + + struct clk_bulk_data clocks[] = { + { .id = "pll" }, +@@ -761,30 +686,89 @@ static int aic32x4_setup_clocks(struct s + { .id = "mdac" }, + { .id = "bdiv" }, + }; +- +- i = aic32x4_get_divs(parent_rate, sample_rate); +- if (i < 0) { +- printk(KERN_ERR "aic32x4: sampling rate not supported\n"); +- return i; +- } +- + ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); + if (ret) + return ret; + +- clk_set_rate(clocks[0].clk, aic32x4_divs[i].pll_rate); +- clk_set_rate(clocks[1].clk, aic32x4_divs[i].nadc_rate); +- clk_set_rate(clocks[2].clk, aic32x4_divs[i].madc_rate); +- clk_set_rate(clocks[3].clk, aic32x4_divs[i].ndac_rate); +- clk_set_rate(clocks[4].clk, aic32x4_divs[i].mdac_rate); +- clk_set_rate(clocks[5].clk, aic32x4_divs[i].bdiv_rate); ++ mclk = clk_get_parent(clocks[1].clk); ++ mclk_rate = clk_get_rate(mclk); + +- aic32x4_set_aosr(component, aic32x4_divs[i].aosr); +- aic32x4_set_dosr(component, aic32x4_divs[i].dosr); ++ if (sample_rate <= 48000) { ++ aosr = 128; ++ adc_resource_class = 6; ++ dac_resource_class = 8; ++ dosr_increment = 8; ++ aic32x4_set_processing_blocks(component, 1, 1); ++ } else if (sample_rate <= 96000) { ++ aosr = 64; ++ adc_resource_class = 6; ++ dac_resource_class = 8; ++ dosr_increment = 4; ++ aic32x4_set_processing_blocks(component, 1, 9); ++ } else if (sample_rate == 192000) { ++ aosr = 32; ++ adc_resource_class = 3; ++ dac_resource_class = 4; ++ dosr_increment = 2; ++ aic32x4_set_processing_blocks(component, 13, 19); ++ } else { ++ dev_err(component->dev, "Sampling rate not supported\n"); ++ return -EINVAL; ++ } + +- aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); ++ madc = DIV_ROUND_UP((32 * adc_resource_class), aosr); ++ max_dosr = (AIC32X4_MAX_DOSR_FREQ / sample_rate / dosr_increment) * ++ dosr_increment; ++ min_dosr = (AIC32X4_MIN_DOSR_FREQ / sample_rate / dosr_increment) * ++ dosr_increment; ++ max_nadc = AIC32X4_MAX_CODEC_CLKIN_FREQ / (madc * aosr * sample_rate); ++ ++ for (nadc = max_nadc; nadc > 0; --nadc) { ++ adc_clock_rate = nadc * madc * aosr * sample_rate; ++ for (dosr = max_dosr; dosr >= min_dosr; ++ dosr -= dosr_increment) { ++ min_mdac = DIV_ROUND_UP((32 * dac_resource_class), dosr); ++ max_ndac = AIC32X4_MAX_CODEC_CLKIN_FREQ / ++ (min_mdac * dosr * sample_rate); ++ for (mdac = min_mdac; mdac <= 128; ++mdac) { ++ for (ndac = max_ndac; ndac > 0; --ndac) { ++ dac_clock_rate = ndac * mdac * dosr * ++ sample_rate; ++ if (dac_clock_rate == adc_clock_rate) { ++ if (clk_round_rate(clocks[0].clk, dac_clock_rate) == 0) ++ continue; ++ ++ clk_set_rate(clocks[0].clk, ++ dac_clock_rate); ++ ++ clk_set_rate(clocks[1].clk, ++ sample_rate * aosr * ++ madc); ++ clk_set_rate(clocks[2].clk, ++ sample_rate * aosr); ++ aic32x4_set_aosr(component, ++ aosr); ++ ++ clk_set_rate(clocks[3].clk, ++ sample_rate * dosr * ++ mdac); ++ clk_set_rate(clocks[4].clk, ++ sample_rate * dosr); ++ aic32x4_set_dosr(component, ++ dosr); ++ ++ clk_set_rate(clocks[5].clk, ++ sample_rate * 32); ++ return 0; ++ } ++ } ++ } ++ } ++ } + +- return 0; ++ dev_err(component->dev, ++ "Could not set clocks to support sample rate.\n"); ++ return -EINVAL; + } + + static int aic32x4_hw_params(struct snd_pcm_substream *substream, +@@ -796,7 +780,7 @@ static int aic32x4_hw_params(struct snd_ + u8 iface1_reg = 0; + u8 dacsetup_reg = 0; + +- aic32x4_setup_clocks(component, params_rate(params), aic32x4->sysclk); ++ aic32x4_setup_clocks(component, params_rate(params)); + + switch (params_width(params)) { + case 16: +--- a/sound/soc/codecs/tlv320aic32x4.h ++++ b/sound/soc/codecs/tlv320aic32x4.h +@@ -211,7 +211,9 @@ int aic32x4_register_clocks(struct devic + #define AIC32X4_DIV_MASK GENMASK(6, 0) + + /* Clock Limits */ ++#define AIC32X4_MAX_DOSR_FREQ 6200000 ++#define AIC32X4_MIN_DOSR_FREQ 2800000 ++#define AIC32X4_MAX_CODEC_CLKIN_FREQ 110000000 + #define AIC32X4_MAX_PLL_CLKIN 20000000 + +- + #endif /* _TLV320AIC32X4_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0365-lan78xx-EEE-support-is-now-a-PHY-property.patch b/target/linux/brcm2708/patches-4.19/950-0365-lan78xx-EEE-support-is-now-a-PHY-property.patch deleted file mode 100644 index bfefa39508..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0365-lan78xx-EEE-support-is-now-a-PHY-property.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 5917a0b0e56928aecd1270c85a79fce77a404629 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 5 Mar 2019 09:51:22 +0000 -Subject: [PATCH 365/806] lan78xx: EEE support is now a PHY property - -Now that EEE support is a property of the PHY, use the PHY's DT node -when querying the EEE-related properties. - -See: https://github.com/raspberrypi/linux/issues/2882 - -Signed-off-by: Phil Elwell ---- - drivers/net/usb/lan78xx.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/usb/lan78xx.c -+++ b/drivers/net/usb/lan78xx.c -@@ -2194,7 +2194,7 @@ static int lan78xx_phy_init(struct lan78 - mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control); - phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv); - -- if (of_property_read_bool(dev->udev->dev.of_node, -+ if (of_property_read_bool(phydev->mdio.dev.of_node, - "microchip,eee-enabled")) { - struct ethtool_eee edata; - memset(&edata, 0, sizeof(edata)); diff --git a/target/linux/brcm2708/patches-4.19/950-0366-ASoC-tlv320aic32x4-Restructure-set_dai_sysclk.patch b/target/linux/brcm2708/patches-4.19/950-0366-ASoC-tlv320aic32x4-Restructure-set_dai_sysclk.patch new file mode 100644 index 0000000000..5caebcb27d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0366-ASoC-tlv320aic32x4-Restructure-set_dai_sysclk.patch @@ -0,0 +1,51 @@ +From 5ec6ed3e423878cf975a955c8796c2cdb10b5ca7 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:52 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Restructure set_dai_sysclk + +commit aa6a60f7be925210d5156f0e8025f3afe1f4f54d upstream. + +The sysclk is now managed by the CCF. Change this function +to merely find the system clock and set it using +clk_set_rate. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 17 ++++++----------- + 1 file changed, 6 insertions(+), 11 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -49,7 +49,6 @@ + + struct aic32x4_priv { + struct regmap *regmap; +- u32 sysclk; + u32 power_cfg; + u32 micpga_routing; + bool swapdacs; +@@ -569,17 +568,13 @@ static int aic32x4_set_dai_sysclk(struct + int clk_id, unsigned int freq, int dir) + { + struct snd_soc_component *component = codec_dai->component; +- struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); ++ struct clk *mclk; ++ struct clk *pll; + +- switch (freq) { +- case 12000000: +- case 24000000: +- case 25000000: +- aic32x4->sysclk = freq; +- return 0; +- } +- printk(KERN_ERR "aic32x4: invalid frequency to set DAI system clock\n"); +- return -EINVAL; ++ pll = devm_clk_get(component->dev, "pll"); ++ mclk = clk_get_parent(pll); ++ ++ return clk_set_rate(mclk, freq); + } + + static int aic32x4_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) diff --git a/target/linux/brcm2708/patches-4.19/950-0366-video-bcm2708_fb-Try-allocating-on-the-ARM-and-passi.patch b/target/linux/brcm2708/patches-4.19/950-0366-video-bcm2708_fb-Try-allocating-on-the-ARM-and-passi.patch deleted file mode 100644 index 476f2b8b1c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0366-video-bcm2708_fb-Try-allocating-on-the-ARM-and-passi.patch +++ /dev/null @@ -1,162 +0,0 @@ -From a9a47ea599c12d29526138cd6e48f6c9eac19358 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 27 Feb 2019 17:30:33 +0000 -Subject: [PATCH 366/806] video: bcm2708_fb: Try allocating on the ARM and - passing to VPU - -Currently the VPU allocates the contiguous buffer for the -framebuffer. -Try an alternate path first where we use dma_alloc_coherent -and pass the buffer to the VPU. Should the VPU firmware not -support that path, then free the buffer and revert to the -old behaviour of using the VPU allocation. - -Signed-off-by: Dave Stevenson ---- - drivers/video/fbdev/bcm2708_fb.c | 102 ++++++++++++++++++--- - include/soc/bcm2835/raspberrypi-firmware.h | 1 + - 2 files changed, 91 insertions(+), 12 deletions(-) - ---- a/drivers/video/fbdev/bcm2708_fb.c -+++ b/drivers/video/fbdev/bcm2708_fb.c -@@ -98,6 +98,11 @@ struct bcm2708_fb { - struct bcm2708_fb_stats stats; - unsigned long fb_bus_address; - struct { u32 base, length; } gpu; -+ -+ bool disable_arm_alloc; -+ unsigned int image_size; -+ dma_addr_t dma_addr; -+ void *cpuaddr; - }; - - #define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) -@@ -283,23 +288,88 @@ static int bcm2708_fb_set_par(struct fb_ - .xoffset = info->var.xoffset, - .yoffset = info->var.yoffset, - .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, -- .base = 0, -- .screen_size = 0, -- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, -- .pitch = 0, -+ /* base and screen_size will be initialised later */ -+ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, -+ /* pitch will be initialised later */ - }; -- int ret; -+ int ret, image_size; -+ - - print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", __func__, info, - info->var.xres, info->var.yres, info->var.xres_virtual, - info->var.yres_virtual, (int)info->screen_size, - info->var.bits_per_pixel); - -- ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); -+ /* Try allocating our own buffer. We can specify all the parameters */ -+ image_size = ((info->var.xres * info->var.yres) * -+ info->var.bits_per_pixel) >> 3; -+ -+ if (!fb->disable_arm_alloc && -+ (image_size != fb->image_size || !fb->dma_addr)) { -+ if (fb->dma_addr) { -+ dma_free_coherent(info->device, fb->image_size, -+ fb->cpuaddr, fb->dma_addr); -+ fb->image_size = 0; -+ fb->cpuaddr = NULL; -+ fb->dma_addr = 0; -+ } -+ -+ fb->cpuaddr = dma_alloc_coherent(info->device, image_size, -+ &fb->dma_addr, GFP_KERNEL); -+ -+ if (!fb->cpuaddr) { -+ fb->dma_addr = 0; -+ fb->disable_arm_alloc = true; -+ } else { -+ fb->image_size = image_size; -+ } -+ } -+ -+ if (fb->cpuaddr) { -+ fbinfo.base = fb->dma_addr; -+ fbinfo.screen_size = image_size; -+ fbinfo.pitch = (info->var.xres * info->var.bits_per_pixel) >> 3; -+ -+ ret = rpi_firmware_property_list(fb->fw, &fbinfo, -+ sizeof(fbinfo)); -+ if (ret || fbinfo.base != fb->dma_addr) { -+ /* Firmware either failed, or assigned a different base -+ * address (ie it doesn't support being passed an FB -+ * allocation). -+ * Destroy the allocation, and don't try again. -+ */ -+ dma_free_coherent(info->device, fb->image_size, -+ fb->cpuaddr, fb->dma_addr); -+ fb->image_size = 0; -+ fb->cpuaddr = NULL; -+ fb->dma_addr = 0; -+ fb->disable_arm_alloc = true; -+ } -+ } else { -+ /* Our allocation failed - drop into the old scheme of -+ * allocation by the VPU. -+ */ -+ ret = -ENOMEM; -+ } -+ - if (ret) { -- dev_err(info->device, -- "Failed to allocate GPU framebuffer (%d)\n", ret); -- return ret; -+ /* Old scheme: -+ * - FRAMEBUFFER_ALLOCATE passes 0 for base and screen_size. -+ * - GET_PITCH instead of SET_PITCH. -+ */ -+ fbinfo.base = 0; -+ fbinfo.screen_size = 0; -+ fbinfo.tag6.tag = RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH; -+ fbinfo.pitch = 0; -+ -+ ret = rpi_firmware_property_list(fb->fw, &fbinfo, -+ sizeof(fbinfo)); -+ if (ret) { -+ dev_err(info->device, -+ "Failed to allocate GPU framebuffer (%d)\n", -+ ret); -+ return ret; -+ } - } - - if (info->var.bits_per_pixel <= 8) -@@ -314,9 +384,17 @@ static int bcm2708_fb_set_par(struct fb_ - fb->fb.fix.smem_start = fbinfo.base; - fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; - fb->fb.screen_size = fbinfo.screen_size; -- if (fb->fb.screen_base) -- iounmap(fb->fb.screen_base); -- fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); -+ -+ if (!fb->dma_addr) { -+ if (fb->fb.screen_base) -+ iounmap(fb->fb.screen_base); -+ -+ fb->fb.screen_base = ioremap_wc(fbinfo.base, -+ fb->fb.screen_size); -+ } else { -+ fb->fb.screen_base = fb->cpuaddr; -+ } -+ - if (!fb->fb.screen_base) { - /* the console may currently be locked */ - console_trylock(); ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -128,6 +128,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, - RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, - RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, - RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, - RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, - RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, diff --git a/target/linux/brcm2708/patches-4.19/950-0367-ASoC-tlv320aic32x4-Remove-mclk-references.patch b/target/linux/brcm2708/patches-4.19/950-0367-ASoC-tlv320aic32x4-Remove-mclk-references.patch new file mode 100644 index 0000000000..bee58524cd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0367-ASoC-tlv320aic32x4-Remove-mclk-references.patch @@ -0,0 +1,39 @@ +From 3c7bf08e6b6bdc2e6005aaa5e6aa6d12ce40d406 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:53 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Remove mclk references + +commit 78f2d58a289302e56a7def96a783a7686ebf27e2 upstream. + +mclk is not used by anything anymore. Remove support for it. +All that information now comes from the clock tree. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 7 ------- + 1 file changed, 7 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -53,7 +53,6 @@ struct aic32x4_priv { + u32 micpga_routing; + bool swapdacs; + int rstn_gpio; +- struct clk *mclk; + const char *mclk_name; + + struct regulator *supply_ldo; +@@ -1191,12 +1190,6 @@ int aic32x4_probe(struct device *dev, st + aic32x4->mclk_name = "mclk"; + } + +- aic32x4->mclk = devm_clk_get(dev, "mclk"); +- if (IS_ERR(aic32x4->mclk)) { +- dev_err(dev, "Failed getting the mclk. The current implementation does not support the usage of this codec without mclk\n"); +- return PTR_ERR(aic32x4->mclk); +- } +- + ret = aic32x4_register_clocks(dev, aic32x4->mclk_name); + if (ret) + return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0367-staging-vc_sm_cma-Remove-erroneous-misc_deregister.patch b/target/linux/brcm2708/patches-4.19/950-0367-staging-vc_sm_cma-Remove-erroneous-misc_deregister.patch deleted file mode 100644 index b1e0a83602..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0367-staging-vc_sm_cma-Remove-erroneous-misc_deregister.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 7b2fac96ce48939e399707c4b8bd9905d6274a05 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 8 Mar 2019 10:38:59 +0000 -Subject: [PATCH 367/806] staging: vc_sm_cma: Remove erroneous misc_deregister - -Code from the misc /dev node was still present in -bcm2835_vc_sm_cma_remove, which caused a NULL deref. -Remove it. - -See #2885. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 5 ----- - 1 file changed, 5 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -25,7 +25,6 @@ - #include - #include - #include --#include - #include - #include - #include -@@ -72,7 +71,6 @@ struct sm_pde_t { - struct sm_state_t { - struct platform_device *pdev; - -- struct miscdevice dev; - struct sm_instance *sm_handle; /* Handle for videocore service. */ - - spinlock_t kernelid_map_lock; /* Spinlock protecting kernelid_map */ -@@ -758,9 +756,6 @@ static int bcm2835_vc_sm_cma_remove(stru - { - pr_debug("[%s]: start\n", __func__); - if (sm_inited) { -- /* Remove shared memory device. */ -- misc_deregister(&sm_state->dev); -- - /* Remove all proc entries. */ - //debugfs_remove_recursive(sm_state->dir_root); - diff --git a/target/linux/brcm2708/patches-4.19/950-0368-ASoC-tlv320aic32x4-Allow-192000-Sample-Rate.patch b/target/linux/brcm2708/patches-4.19/950-0368-ASoC-tlv320aic32x4-Allow-192000-Sample-Rate.patch new file mode 100644 index 0000000000..15ded09f36 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0368-ASoC-tlv320aic32x4-Allow-192000-Sample-Rate.patch @@ -0,0 +1,27 @@ +From e54269cdeb78beb5131594de702daeecc2b05ec2 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Thu, 21 Mar 2019 17:58:54 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Allow 192000 Sample Rate + +commit 6d56ee1550b8a81bc63c80051ff78d8d704b09ba upstream. + +The clocking and processing blocks are now properly set up to +support 192000 sample rates. Allow drivers to ask for that. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -859,7 +859,7 @@ static int aic32x4_set_bias_level(struct + return 0; + } + +-#define AIC32X4_RATES SNDRV_PCM_RATE_8000_96000 ++#define AIC32X4_RATES SNDRV_PCM_RATE_8000_192000 + #define AIC32X4_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \ + | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) + diff --git a/target/linux/brcm2708/patches-4.19/950-0368-vcsm-Fix-makefile-include-on-out-of-tree-builds.patch b/target/linux/brcm2708/patches-4.19/950-0368-vcsm-Fix-makefile-include-on-out-of-tree-builds.patch deleted file mode 100644 index 0f0a6a873e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0368-vcsm-Fix-makefile-include-on-out-of-tree-builds.patch +++ /dev/null @@ -1,27 +0,0 @@ -From d36a5a94156ebe7e9906574fa8b01b200a15c11d Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Mon, 18 Mar 2019 17:14:51 +0000 -Subject: [PATCH 368/806] vcsm: Fix makefile include on out-of-tree builds - -The vc_sm module tries to include the 'fs' directory from the -$(srctree). $(srctree) is already provided by the build system, and -causes the include path to be duplicated. - -With -Werror this fails to compile. - -Remove the unnecessary variable. - -Signed-off-by: Kieran Bingham ---- - drivers/char/broadcom/vc_sm/Makefile | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/char/broadcom/vc_sm/Makefile -+++ b/drivers/char/broadcom/vc_sm/Makefile -@@ -1,5 +1,5 @@ - ccflags-$(CONFIG_BCM_VC_SM) += -Werror -Wall -Wstrict-prototypes -Wno-trigraphs -O2 --ccflags-$(CONFIG_BCM_VC_SM) += -I"drivers/staging/vc04_services" -I"drivers/staging/vc04_services/interface/vchi" -I"drivers/staging/vc04_services/interface/vchiq_arm" -I"$(srctree)/fs/" -+ccflags-$(CONFIG_BCM_VC_SM) += -I"drivers/staging/vc04_services" -I"drivers/staging/vc04_services/interface/vchi" -I"drivers/staging/vc04_services/interface/vchiq_arm" -I"fs" - ccflags-$(CONFIG_BCM_VC_SM) += -DOS_ASSERT_FAILURE -D__STDC_VERSION=199901L -D__STDC_VERSION__=199901L -D__VCCOREVER__=0 -D__KERNEL__ -D__linux__ - - obj-$(CONFIG_BCM_VC_SM) := vc-sm.o diff --git a/target/linux/brcm2708/patches-4.19/950-0369-ASoC-tlv320aic32x4-Only-enable-with-common-clock.patch b/target/linux/brcm2708/patches-4.19/950-0369-ASoC-tlv320aic32x4-Only-enable-with-common-clock.patch new file mode 100644 index 0000000000..d995353ef4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0369-ASoC-tlv320aic32x4-Only-enable-with-common-clock.patch @@ -0,0 +1,43 @@ +From 0ef20f96802fac1ce888a1e0b56e14b6b3fd4f72 Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Tue, 26 Mar 2019 13:10:13 +0000 +Subject: [PATCH] ASoC: tlv320aic32x4: Only enable with common clock + +commit 64f01d2b5ccc621c3aa66b82daf9154f5581f36a upstream. + +Some architectures do not yet support the common clock API at all but +the tlv320aic32x4 driver now requires it. + +Reported-by: Stephen Rothwell +Signed-off-by: Mark Brown +--- + sound/soc/codecs/Kconfig | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/sound/soc/codecs/Kconfig ++++ b/sound/soc/codecs/Kconfig +@@ -170,8 +170,8 @@ config SND_SOC_ALL_CODECS + select SND_SOC_TAS5713 if I2C + select SND_SOC_TLV320AIC26 if SPI_MASTER + select SND_SOC_TLV320AIC31XX if I2C +- select SND_SOC_TLV320AIC32X4_I2C if I2C +- select SND_SOC_TLV320AIC32X4_SPI if SPI_MASTER ++ select SND_SOC_TLV320AIC32X4_I2C if I2C && COMMON_CLK ++ select SND_SOC_TLV320AIC32X4_SPI if SPI_MASTER && COMMON_CLK + select SND_SOC_TLV320AIC3X if I2C + select SND_SOC_TPA6130A2 if I2C + select SND_SOC_TLV320DAC33 if I2C +@@ -1030,11 +1030,13 @@ config SND_SOC_TLV320AIC32X4 + config SND_SOC_TLV320AIC32X4_I2C + tristate "Texas Instruments TLV320AIC32x4 audio CODECs - I2C" + depends on I2C ++ depends on COMMON_CLK + select SND_SOC_TLV320AIC32X4 + + config SND_SOC_TLV320AIC32X4_SPI + tristate "Texas Instruments TLV320AIC32x4 audio CODECs - SPI" + depends on SPI_MASTER ++ depends on COMMON_CLK + select SND_SOC_TLV320AIC32X4 + + config SND_SOC_TLV320AIC3X diff --git a/target/linux/brcm2708/patches-4.19/950-0369-vcsm-Remove-set-but-unused-variable.patch b/target/linux/brcm2708/patches-4.19/950-0369-vcsm-Remove-set-but-unused-variable.patch deleted file mode 100644 index cf6d0101fa..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0369-vcsm-Remove-set-but-unused-variable.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 5a58b2bb907d57dc2b1cc2619bd5f1d948509e3e Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Mon, 18 Mar 2019 17:16:41 +0000 -Subject: [PATCH 369/806] vcsm: Remove set but unused variable - -The 'success' variable is set by the call to vchi_service_close() but never checked. -Remove it, keeping the call in place. - -Signed-off-by: Kieran Bingham ---- - drivers/char/broadcom/vc_sm/vc_vchi_sm.c | 4 +--- - 1 file changed, 1 insertion(+), 3 deletions(-) - ---- a/drivers/char/broadcom/vc_sm/vc_vchi_sm.c -+++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.c -@@ -361,11 +361,9 @@ int vc_vchi_sm_stop(struct sm_instance * - - /* Close all VCHI service connections */ - for (i = 0; i < instance->num_connections; i++) { -- int32_t success; -- - vchi_service_use(instance->vchi_handle[i]); - -- success = vchi_service_close(instance->vchi_handle[i]); -+ vchi_service_close(instance->vchi_handle[i]); - } - - kfree(instance); diff --git a/target/linux/brcm2708/patches-4.19/950-0370-Audiophonics-I-Sabre-9038Q2M-DAC-driver.patch b/target/linux/brcm2708/patches-4.19/950-0370-Audiophonics-I-Sabre-9038Q2M-DAC-driver.patch new file mode 100644 index 0000000000..ba10100241 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0370-Audiophonics-I-Sabre-9038Q2M-DAC-driver.patch @@ -0,0 +1,761 @@ +From c667b06f616d5dec68469ac73764abd5bcb1d694 Mon Sep 17 00:00:00 2001 +From: FERHAT Nicolas +Date: Fri, 5 Apr 2019 13:06:42 +0100 +Subject: [PATCH] Audiophonics I-Sabre 9038Q2M DAC driver + +Signed-off-by: Audiophonics +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 + + .../boot/dts/overlays/i-sabre-q2m-overlay.dts | 39 ++ + sound/soc/bcm/Kconfig | 7 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/i-sabre-q2m.c | 157 +++++++ + sound/soc/codecs/Kconfig | 5 + + sound/soc/codecs/Makefile | 2 + + sound/soc/codecs/i-sabre-codec.c | 392 ++++++++++++++++++ + sound/soc/codecs/i-sabre-codec.h | 42 ++ + 13 files changed, 656 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts + create mode 100644 sound/soc/bcm/i-sabre-q2m.c + create mode 100644 sound/soc/codecs/i-sabre-codec.c + create mode 100644 sound/soc/codecs/i-sabre-codec.h + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -55,6 +55,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + hy28a.dtbo \ + hy28b.dtbo \ + hy28b-2017.dtbo \ ++ i-sabre-q2m.dtbo \ + i2c-bcm2708.dtbo \ + i2c-gpio.dtbo \ + i2c-mux.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -869,6 +869,12 @@ Params: speed Display + ledgpio GPIO used to control backlight + + ++Name: i-sabre-q2m ++Info: Configures the Audiophonics I-SABRE Q2M DAC ++Load: dtoverlay=i-sabre-q2m ++Params: ++ ++ + Name: i2c-bcm2708 + Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus. + Load: dtoverlay=i2c-bcm2708 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for I-Sabre Q2M ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&sound>; ++ frag0: __overlay__ { ++ compatible = "audiophonics,i-sabre-q2m"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ i-sabre-codec@48 { ++ #sound-dai-cells = <0>; ++ compatible = "audiophonics,i-sabre-codec"; ++ reg = <0x48>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -123,6 +123,13 @@ config SND_BCM2708_SOC_IQAUDIO_DIGI + help + Say Y or M if you want to add support for IQAudIO Digital IO board. + ++config SND_BCM2708_SOC_I_SABRE_Q2M ++ tristate "Support for Audiophonics I-Sabre Q2M DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_I_SABRE_CODEC ++ help ++ Say Y or M if you want to add support for Audiophonics I-SABRE Q2M DAC ++ + config SND_BCM2708_SOC_ADAU1977_ADC + tristate "Support for ADAU1977 ADC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -19,6 +19,7 @@ snd-soc-justboom-dac-objs := justboom-da + snd-soc-rpi-cirrus-objs := rpi-cirrus.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o ++ snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o + snd-soc-audiosense-pi-objs := audiosense-pi.o +@@ -42,6 +43,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DA + obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ++ obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o + obj-$(CONFIG_SND_AUDIOSENSE_PI) += snd-soc-audiosense-pi.o +--- /dev/null ++++ b/sound/soc/bcm/i-sabre-q2m.c +@@ -0,0 +1,157 @@ ++/* ++ * ASoC Driver for I-Sabre Q2M ++ * ++ * Author: Satoru Kawase ++ * Modified by: Xiao Qingyong ++ * Update kernel v4.18+ by : Audiophonics ++ * Copyright 2018 Audiophonics ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/i-sabre-codec.h" ++ ++ ++static int snd_rpi_i_sabre_q2m_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_component *component = rtd->codec_dai->component; ++ unsigned int value; ++ ++ /* Device ID */ ++ value = snd_soc_component_read32(component, ISABRECODEC_REG_01); ++ dev_info(component->card->dev, "Audiophonics Device ID : %02X\n", value); ++ ++ /* API revision */ ++ value = snd_soc_component_read32(component, ISABRECODEC_REG_02); ++ dev_info(component->card->dev, "Audiophonics API revision : %02X\n", value); ++ ++ return 0; ++} ++ ++static int snd_rpi_i_sabre_q2m_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ int bclk_ratio; ++ ++ bclk_ratio = snd_pcm_format_physical_width( ++ params_format(params)) * params_channels(params); ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, bclk_ratio); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_i_sabre_q2m_ops = { ++ .hw_params = snd_rpi_i_sabre_q2m_hw_params, ++}; ++ ++ ++static struct snd_soc_dai_link snd_rpi_i_sabre_q2m_dai[] = { ++ { ++ .name = "I-Sabre Q2M", ++ .stream_name = "I-Sabre Q2M DAC", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "i-sabre-codec-dai", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "i-sabre-codec-i2c.1-0048", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBS_CFS, ++ .init = snd_rpi_i_sabre_q2m_init, ++ .ops = &snd_rpi_i_sabre_q2m_ops, ++ } ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_i_sabre_q2m = { ++ .name = "I-Sabre Q2M DAC", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_i_sabre_q2m_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_i_sabre_q2m_dai) ++}; ++ ++ ++static int snd_rpi_i_sabre_q2m_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_i_sabre_q2m.dev = &pdev->dev; ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai; ++ ++ dai = &snd_rpi_i_sabre_q2m_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } else { ++ dev_err(&pdev->dev, ++ "Property 'i2s-controller' missing or invalid\n"); ++ return (-EINVAL); ++ } ++ ++ dai->name = "I-Sabre Q2M"; ++ dai->stream_name = "I-Sabre Q2M DAC"; ++ dai->dai_fmt = SND_SOC_DAIFMT_I2S ++ | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBS_CFS; ++ } ++ ++ /* Wait for registering codec driver */ ++ mdelay(50); ++ ++ ret = snd_soc_register_card(&snd_rpi_i_sabre_q2m); ++ if (ret) { ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ } ++ ++ return ret; ++} ++ ++static int snd_rpi_i_sabre_q2m_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_i_sabre_q2m); ++} ++ ++static const struct of_device_id snd_rpi_i_sabre_q2m_of_match[] = { ++ { .compatible = "audiophonics,i-sabre-q2m", }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_i_sabre_q2m_of_match); ++ ++static struct platform_driver snd_rpi_i_sabre_q2m_driver = { ++ .driver = { ++ .name = "snd-rpi-i-sabre-q2m", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_i_sabre_q2m_of_match, ++ }, ++ .probe = snd_rpi_i_sabre_q2m_probe, ++ .remove = snd_rpi_i_sabre_q2m_remove, ++}; ++module_platform_driver(snd_rpi_i_sabre_q2m_driver); ++ ++MODULE_DESCRIPTION("ASoC Driver for I-Sabre Q2M"); ++MODULE_AUTHOR("Audiophonics "); ++MODULE_LICENSE("GPL"); +--- a/sound/soc/codecs/Kconfig ++++ b/sound/soc/codecs/Kconfig +@@ -85,6 +85,7 @@ config SND_SOC_ALL_CODECS + select SND_SOC_ICS43432 + select SND_SOC_INNO_RK3036 + select SND_SOC_ISABELLE if I2C ++ select SND_SOC_I_SABRE_CODEC if I2C + select SND_SOC_JZ4740_CODEC + select SND_SOC_LM4857 if I2C + select SND_SOC_LM49453 if I2C +@@ -1322,4 +1323,8 @@ config SND_SOC_TPA6130A2 + tristate "Texas Instruments TPA6130A2 headphone amplifier" + depends on I2C + ++config SND_SOC_I_SABRE_CODEC ++ tristate "Audiophonics I-SABRE Codec" ++ depends on I2C ++ + endmenu +--- a/sound/soc/codecs/Makefile ++++ b/sound/soc/codecs/Makefile +@@ -81,6 +81,7 @@ snd-soc-hdac-hdmi-objs := hdac_hdmi.o + snd-soc-ics43432-objs := ics43432.o + snd-soc-inno-rk3036-objs := inno_rk3036.o + snd-soc-isabelle-objs := isabelle.o ++snd-soc-i-sabre-codec-objs := i-sabre-codec.o + snd-soc-jz4740-codec-objs := jz4740.o + snd-soc-l3-objs := l3.o + snd-soc-lm4857-objs := lm4857.o +@@ -343,6 +344,7 @@ obj-$(CONFIG_SND_SOC_HDAC_HDMI) += snd-s + obj-$(CONFIG_SND_SOC_ICS43432) += snd-soc-ics43432.o + obj-$(CONFIG_SND_SOC_INNO_RK3036) += snd-soc-inno-rk3036.o + obj-$(CONFIG_SND_SOC_ISABELLE) += snd-soc-isabelle.o ++obj-$(CONFIG_SND_SOC_I_SABRE_CODEC) += snd-soc-i-sabre-codec.o + obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o + obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o + obj-$(CONFIG_SND_SOC_LM4857) += snd-soc-lm4857.o +--- /dev/null ++++ b/sound/soc/codecs/i-sabre-codec.c +@@ -0,0 +1,392 @@ ++/* ++ * Driver for I-Sabre Q2M ++ * ++ * Author: Satoru Kawase ++ * Modified by: Xiao Qingyong ++ * Modified by: JC BARBAUD (Mute) ++ * Update kernel v4.18+ by : Audiophonics ++ * Copyright 2018 Audiophonics ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "i-sabre-codec.h" ++ ++ ++/* I-Sabre Q2M Codec Private Data */ ++struct i_sabre_codec_priv { ++ struct regmap *regmap; ++ unsigned int fmt; ++}; ++ ++ ++/* I-Sabre Q2M Codec Default Register Value */ ++static const struct reg_default i_sabre_codec_reg_defaults[] = { ++ { ISABRECODEC_REG_10, 0x00 }, ++ { ISABRECODEC_REG_20, 0x00 }, ++ { ISABRECODEC_REG_21, 0x00 }, ++ { ISABRECODEC_REG_22, 0x00 }, ++ { ISABRECODEC_REG_24, 0x00 }, ++}; ++ ++ ++static bool i_sabre_codec_writeable(struct device *dev, unsigned int reg) ++{ ++ switch (reg) { ++ case ISABRECODEC_REG_10: ++ case ISABRECODEC_REG_20: ++ case ISABRECODEC_REG_21: ++ case ISABRECODEC_REG_22: ++ case ISABRECODEC_REG_24: ++ return true; ++ ++ default: ++ return false; ++ } ++} ++ ++static bool i_sabre_codec_readable(struct device *dev, unsigned int reg) ++{ ++ switch (reg) { ++ case ISABRECODEC_REG_01: ++ case ISABRECODEC_REG_02: ++ case ISABRECODEC_REG_10: ++ case ISABRECODEC_REG_20: ++ case ISABRECODEC_REG_21: ++ case ISABRECODEC_REG_22: ++ case ISABRECODEC_REG_24: ++ return true; ++ ++ default: ++ return false; ++ } ++} ++ ++static bool i_sabre_codec_volatile(struct device *dev, unsigned int reg) ++{ ++ switch (reg) { ++ case ISABRECODEC_REG_01: ++ case ISABRECODEC_REG_02: ++ return true; ++ ++ default: ++ return false; ++ } ++} ++ ++ ++/* Volume Scale */ ++static const DECLARE_TLV_DB_SCALE(volume_tlv, -10000, 100, 0); ++ ++ ++/* Filter Type */ ++static const char * const fir_filter_type_texts[] = { ++ "brick wall", ++ "corrected minimum phase fast", ++ "minimum phase slow", ++ "minimum phase fast", ++ "linear phase slow", ++ "linear phase fast", ++ "apodizing fast", ++}; ++ ++static SOC_ENUM_SINGLE_DECL(i_sabre_fir_filter_type_enum, ++ ISABRECODEC_REG_22, 0, fir_filter_type_texts); ++ ++ ++/* I2S / SPDIF Select */ ++static const char * const iis_spdif_sel_texts[] = { ++ "I2S", ++ "SPDIF", ++}; ++ ++static SOC_ENUM_SINGLE_DECL(i_sabre_iis_spdif_sel_enum, ++ ISABRECODEC_REG_24, 0, iis_spdif_sel_texts); ++ ++ ++/* Control */ ++static const struct snd_kcontrol_new i_sabre_codec_controls[] = { ++SOC_SINGLE_RANGE_TLV("Digital Playback Volume", ISABRECODEC_REG_20, 0, 0, 100, 1, volume_tlv), ++SOC_SINGLE("Digital Playback Switch", ISABRECODEC_REG_21, 0, 1, 1), ++SOC_ENUM("FIR Filter Type", i_sabre_fir_filter_type_enum), ++SOC_ENUM("I2S/SPDIF Select", i_sabre_iis_spdif_sel_enum), ++}; ++ ++ ++static const u32 i_sabre_codec_dai_rates_slave[] = { ++ 8000, 11025, 16000, 22050, 32000, ++ 44100, 48000, 64000, 88200, 96000, ++ 176400, 192000, 352800, 384000, ++ 705600, 768000, 1411200, 1536000 ++}; ++ ++static const struct snd_pcm_hw_constraint_list constraints_slave = { ++ .list = i_sabre_codec_dai_rates_slave, ++ .count = ARRAY_SIZE(i_sabre_codec_dai_rates_slave), ++}; ++ ++static int i_sabre_codec_dai_startup_slave( ++ struct snd_pcm_substream *substream, struct snd_soc_dai *dai) ++{ ++ struct snd_soc_component *component = dai->component; ++ int ret; ++ ++ ret = snd_pcm_hw_constraint_list(substream->runtime, ++ 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_slave); ++ if (ret != 0) { ++ dev_err(component->card->dev, "Failed to setup rates constraints: %d\n", ret); ++ } ++ ++ return ret; ++} ++ ++static int i_sabre_codec_dai_startup( ++ struct snd_pcm_substream *substream, struct snd_soc_dai *dai) ++{ ++ struct snd_soc_component *component = dai->component; ++ struct i_sabre_codec_priv *i_sabre_codec ++ = snd_soc_component_get_drvdata(component); ++ ++ switch (i_sabre_codec->fmt & SND_SOC_DAIFMT_MASTER_MASK) { ++ case SND_SOC_DAIFMT_CBS_CFS: ++ return i_sabre_codec_dai_startup_slave(substream, dai); ++ ++ default: ++ return (-EINVAL); ++ } ++} ++ ++static int i_sabre_codec_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, ++ struct snd_soc_dai *dai) ++{ ++ struct snd_soc_component *component = dai->component; ++ struct i_sabre_codec_priv *i_sabre_codec ++ = snd_soc_component_get_drvdata(component); ++ unsigned int daifmt; ++ int format_width; ++ ++ dev_dbg(component->card->dev, "hw_params %u Hz, %u channels\n", ++ params_rate(params), params_channels(params)); ++ ++ /* Check I2S Format (Bit Size) */ ++ format_width = snd_pcm_format_width(params_format(params)); ++ if ((format_width != 32) && (format_width != 16)) { ++ dev_err(component->card->dev, "Bad frame size: %d\n", ++ snd_pcm_format_width(params_format(params))); ++ return (-EINVAL); ++ } ++ ++ /* Check Slave Mode */ ++ daifmt = i_sabre_codec->fmt & SND_SOC_DAIFMT_MASTER_MASK; ++ if (daifmt != SND_SOC_DAIFMT_CBS_CFS) { ++ return (-EINVAL); ++ } ++ ++ /* Notify Sampling Frequency */ ++ switch (params_rate(params)) ++ { ++ case 44100: ++ case 48000: ++ case 88200: ++ case 96000: ++ case 176400: ++ case 192000: ++ snd_soc_component_update_bits(component, ISABRECODEC_REG_10, 0x01, 0x00); ++ break; ++ ++ case 352800: ++ case 384000: ++ case 705600: ++ case 768000: ++ case 1411200: ++ case 1536000: ++ snd_soc_component_update_bits(component, ISABRECODEC_REG_10, 0x01, 0x01); ++ break; ++ } ++ ++ return 0; ++} ++ ++static int i_sabre_codec_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) ++{ ++ struct snd_soc_component *component = dai->component; ++ struct i_sabre_codec_priv *i_sabre_codec ++ = snd_soc_component_get_drvdata(component); ++ ++ /* interface format */ ++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { ++ case SND_SOC_DAIFMT_I2S: ++ break; ++ ++ case SND_SOC_DAIFMT_RIGHT_J: ++ case SND_SOC_DAIFMT_LEFT_J: ++ default: ++ return (-EINVAL); ++ } ++ ++ /* clock inversion */ ++ if ((fmt & SND_SOC_DAIFMT_INV_MASK) != SND_SOC_DAIFMT_NB_NF) { ++ return (-EINVAL); ++ } ++ ++ /* Set Audio Data Format */ ++ i_sabre_codec->fmt = fmt; ++ ++ return 0; ++} ++ ++static int i_sabre_codec_dac_mute(struct snd_soc_dai *dai, int mute) ++{ ++ struct snd_soc_component *component = dai->component; ++ ++ if (mute) { ++ snd_soc_component_update_bits(component, ISABRECODEC_REG_21, 0x01, 0x01); ++ } else { ++ snd_soc_component_update_bits(component, ISABRECODEC_REG_21, 0x01, 0x00); ++ } ++ ++ return 0; ++} ++ ++ ++static const struct snd_soc_dai_ops i_sabre_codec_dai_ops = { ++ .startup = i_sabre_codec_dai_startup, ++ .hw_params = i_sabre_codec_hw_params, ++ .set_fmt = i_sabre_codec_set_fmt, ++ .digital_mute = i_sabre_codec_dac_mute, ++}; ++ ++static struct snd_soc_dai_driver i_sabre_codec_dai = { ++ .name = "i-sabre-codec-dai", ++ .playback = { ++ .stream_name = "Playback", ++ .channels_min = 2, ++ .channels_max = 2, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS, ++ .rate_min = 8000, ++ .rate_max = 1536000, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE ++ | SNDRV_PCM_FMTBIT_S32_LE, ++ }, ++ .ops = &i_sabre_codec_dai_ops, ++}; ++ ++static struct snd_soc_component_driver i_sabre_codec_codec_driver = { ++ .controls = i_sabre_codec_controls, ++ .num_controls = ARRAY_SIZE(i_sabre_codec_controls), ++}; ++ ++ ++static const struct regmap_config i_sabre_codec_regmap = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ .max_register = ISABRECODEC_MAX_REG, ++ ++ .reg_defaults = i_sabre_codec_reg_defaults, ++ .num_reg_defaults = ARRAY_SIZE(i_sabre_codec_reg_defaults), ++ ++ .writeable_reg = i_sabre_codec_writeable, ++ .readable_reg = i_sabre_codec_readable, ++ .volatile_reg = i_sabre_codec_volatile, ++ ++ .cache_type = REGCACHE_RBTREE, ++}; ++ ++ ++static int i_sabre_codec_probe(struct device *dev, struct regmap *regmap) ++{ ++ struct i_sabre_codec_priv *i_sabre_codec; ++ int ret; ++ ++ i_sabre_codec = devm_kzalloc(dev, sizeof(*i_sabre_codec), GFP_KERNEL); ++ if (!i_sabre_codec) { ++ dev_err(dev, "devm_kzalloc"); ++ return (-ENOMEM); ++ } ++ ++ i_sabre_codec->regmap = regmap; ++ ++ dev_set_drvdata(dev, i_sabre_codec); ++ ++ ret = snd_soc_register_component(dev, ++ &i_sabre_codec_codec_driver, &i_sabre_codec_dai, 1); ++ if (ret != 0) { ++ dev_err(dev, "Failed to register CODEC: %d\n", ret); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static void i_sabre_codec_remove(struct device *dev) ++{ ++ snd_soc_unregister_component(dev); ++} ++ ++ ++static int i_sabre_codec_i2c_probe( ++ struct i2c_client *i2c, const struct i2c_device_id *id) ++{ ++ struct regmap *regmap; ++ ++ regmap = devm_regmap_init_i2c(i2c, &i_sabre_codec_regmap); ++ if (IS_ERR(regmap)) { ++ return PTR_ERR(regmap); ++ } ++ ++ return i_sabre_codec_probe(&i2c->dev, regmap); ++} ++ ++static int i_sabre_codec_i2c_remove(struct i2c_client *i2c) ++{ ++ i_sabre_codec_remove(&i2c->dev); ++ ++ return 0; ++} ++ ++ ++static const struct i2c_device_id i_sabre_codec_i2c_id[] = { ++ { "i-sabre-codec", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(i2c, i_sabre_codec_i2c_id); ++ ++static const struct of_device_id i_sabre_codec_of_match[] = { ++ { .compatible = "audiophonics,i-sabre-codec", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, i_sabre_codec_of_match); ++ ++static struct i2c_driver i_sabre_codec_i2c_driver = { ++ .driver = { ++ .name = "i-sabre-codec-i2c", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(i_sabre_codec_of_match), ++ }, ++ .probe = i_sabre_codec_i2c_probe, ++ .remove = i_sabre_codec_i2c_remove, ++ .id_table = i_sabre_codec_i2c_id, ++}; ++module_i2c_driver(i_sabre_codec_i2c_driver); ++ ++ ++MODULE_DESCRIPTION("ASoC I-Sabre Q2M codec driver"); ++MODULE_AUTHOR("Audiophonics "); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/sound/soc/codecs/i-sabre-codec.h +@@ -0,0 +1,42 @@ ++/* ++ * Driver for I-Sabre Q2M ++ * ++ * Author: Satoru Kawase ++ * Modified by: Xiao Qingyong ++ * Copyright 2018 Audiophonics ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#ifndef _SND_SOC_ISABRECODEC ++#define _SND_SOC_ISABRECODEC ++ ++ ++/* ISABRECODEC Register Address */ ++#define ISABRECODEC_REG_01 0x01 /* Virtual Device ID : 0x01 = es9038q2m */ ++#define ISABRECODEC_REG_02 0x02 /* API revision : 0x01 = Revision 01 */ ++#define ISABRECODEC_REG_10 0x10 /* 0x01 = above 192kHz, 0x00 = otherwise */ ++#define ISABRECODEC_REG_20 0x20 /* 0 - 100 (decimal value, 0 = min., 100 = max.) */ ++#define ISABRECODEC_REG_21 0x21 /* 0x00 = Mute OFF, 0x01 = Mute ON */ ++#define ISABRECODEC_REG_22 0x22 ++/* ++ 0x00 = brick wall, ++ 0x01 = corrected minimum phase fast, ++ 0x02 = minimum phase slow, ++ 0x03 = minimum phase fast, ++ 0x04 = linear phase slow, ++ 0x05 = linear phase fast, ++ 0x06 = apodizing fast, ++*/ ++//#define ISABRECODEC_REG_23 0x23 /* reserved */ ++#define ISABRECODEC_REG_24 0x24 /* 0x00 = I2S, 0x01 = SPDIF */ ++#define ISABRECODEC_MAX_REG 0x24 /* Maximum Register Number */ ++ ++#endif /* _SND_SOC_ISABRECODEC */ diff --git a/target/linux/brcm2708/patches-4.19/950-0370-vcsm-Reduce-scope-of-local-functions.patch b/target/linux/brcm2708/patches-4.19/950-0370-vcsm-Reduce-scope-of-local-functions.patch deleted file mode 100644 index 14b1c8bc7d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0370-vcsm-Reduce-scope-of-local-functions.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 2a1fd1a32b7355c6ae8c5fc1654a96fa42e00586 Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Mon, 18 Mar 2019 17:17:40 +0000 -Subject: [PATCH 370/806] vcsm: Reduce scope of local functions - -The functions: - - vc_vchi_sm_send_msg - vc_sm_ioctl_alloc - vc_sm_ioctl_alloc_share - vc_sm_ioctl_import_dmabuf - -Are declared without a prototype. They are not used outside of this -module, thus - convert them to static functions. - -Signed-off-by: Kieran Bingham ---- - drivers/char/broadcom/vc_sm/vc_vchi_sm.c | 2 +- - drivers/char/broadcom/vc_sm/vmcs_sm.c | 14 +++++++------- - 2 files changed, 8 insertions(+), 8 deletions(-) - ---- a/drivers/char/broadcom/vc_sm/vc_vchi_sm.c -+++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.c -@@ -375,7 +375,7 @@ lock: - return -EINVAL; - } - --int vc_vchi_sm_send_msg(struct sm_instance *handle, -+static int vc_vchi_sm_send_msg(struct sm_instance *handle, - enum vc_sm_msg_type msg_id, - void *msg, uint32_t msg_size, - void *result, uint32_t result_size, ---- a/drivers/char/broadcom/vc_sm/vmcs_sm.c -+++ b/drivers/char/broadcom/vc_sm/vmcs_sm.c -@@ -1574,8 +1574,8 @@ error: - } - - /* Allocate a shared memory handle and block. */ --int vc_sm_ioctl_alloc(struct sm_priv_data_t *private, -- struct vmcs_sm_ioctl_alloc *ioparam) -+static int vc_sm_ioctl_alloc(struct sm_priv_data_t *private, -+ struct vmcs_sm_ioctl_alloc *ioparam) - { - int ret = 0; - int status; -@@ -1685,8 +1685,8 @@ error: - } - - /* Share an allocate memory handle and block.*/ --int vc_sm_ioctl_alloc_share(struct sm_priv_data_t *private, -- struct vmcs_sm_ioctl_alloc_share *ioparam) -+static int vc_sm_ioctl_alloc_share(struct sm_priv_data_t *private, -+ struct vmcs_sm_ioctl_alloc_share *ioparam) - { - struct sm_resource_t *resource, *shared_resource; - int ret = 0; -@@ -2200,9 +2200,9 @@ error: - } - - /* Import a contiguous block of memory to be shared with VC. */ --int vc_sm_ioctl_import_dmabuf(struct sm_priv_data_t *private, -- struct vmcs_sm_ioctl_import_dmabuf *ioparam, -- struct dma_buf *src_dma_buf) -+static int vc_sm_ioctl_import_dmabuf(struct sm_priv_data_t *private, -+ struct vmcs_sm_ioctl_import_dmabuf *ioparam, -+ struct dma_buf *src_dma_buf) - { - int ret = 0; - int status; diff --git a/target/linux/brcm2708/patches-4.19/950-0371-ASoC-tlv320aic32x4-Change-author-s-name.patch b/target/linux/brcm2708/patches-4.19/950-0371-ASoC-tlv320aic32x4-Change-author-s-name.patch new file mode 100644 index 0000000000..8c4cdd568b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0371-ASoC-tlv320aic32x4-Change-author-s-name.patch @@ -0,0 +1,54 @@ +From 5942d9e650ce419236d5a7dc53c2513889ed3453 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Wed, 3 Apr 2019 21:17:15 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Change author's name + +commit 7297ba6c74c5b9e78d8e936af82eecfcf7d32dfb upstream. + +The author of these files has changed her name. Update +instances in the code of her dead name to current legal +name. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4-i2c.c | 4 ++-- + sound/soc/codecs/tlv320aic32x4-spi.c | 4 ++-- + 2 files changed, 4 insertions(+), 4 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4-i2c.c ++++ b/sound/soc/codecs/tlv320aic32x4-i2c.c +@@ -3,7 +3,7 @@ + * + * Copyright 2011 NW Digital Radio + * +- * Author: Jeremy McDermond ++ * Author: Annaliese McDermond + * + * Based on sound/soc/codecs/wm8974 and TI driver for kernel 2.6.27. + * +@@ -72,5 +72,5 @@ static struct i2c_driver aic32x4_i2c_dri + module_i2c_driver(aic32x4_i2c_driver); + + MODULE_DESCRIPTION("ASoC TLV320AIC32x4 codec driver I2C"); +-MODULE_AUTHOR("Jeremy McDermond "); ++MODULE_AUTHOR("Annaliese McDermond "); + MODULE_LICENSE("GPL"); +--- a/sound/soc/codecs/tlv320aic32x4-spi.c ++++ b/sound/soc/codecs/tlv320aic32x4-spi.c +@@ -3,7 +3,7 @@ + * + * Copyright 2011 NW Digital Radio + * +- * Author: Jeremy McDermond ++ * Author: Annaliese McDermond + * + * Based on sound/soc/codecs/wm8974 and TI driver for kernel 2.6.27. + * +@@ -74,5 +74,5 @@ static struct spi_driver aic32x4_spi_dri + module_spi_driver(aic32x4_spi_driver); + + MODULE_DESCRIPTION("ASoC TLV320AIC32x4 codec driver SPI"); +-MODULE_AUTHOR("Jeremy McDermond "); ++MODULE_AUTHOR("Annaliese McDermond "); + MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.19/950-0371-staging-bcm2835-codec-NULL-component-handle-on-queue.patch b/target/linux/brcm2708/patches-4.19/950-0371-staging-bcm2835-codec-NULL-component-handle-on-queue.patch deleted file mode 100644 index 9f87092656..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0371-staging-bcm2835-codec-NULL-component-handle-on-queue.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 140c118a9886b0386d748e6aa7cbd8ba9f9b0ede Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 19 Mar 2019 17:55:09 +0000 -Subject: [PATCH 371/806] staging: bcm2835-codec: NULL component handle on - queue_setup failure - -queue_setup tries creating the relevant MMAL component and configures -the input and output ports as we're expecting to start streaming. -If the port configuration failed then it destroyed the component, -but failed to clear the component handle, therefore release tried -destroying the component again. -Adds some logging should the port config fail as well. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 15 +++++++++++++-- - 1 file changed, 13 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -1776,13 +1776,21 @@ static int bcm2835_codec_create_componen - - ret = vchiq_mmal_port_set_format(dev->instance, - &ctx->component->input[0]); -- if (ret < 0) -+ if (ret < 0) { -+ v4l2_dbg(1, debug, &dev->v4l2_dev, -+ "%s: vchiq_mmal_port_set_format ip port failed\n", -+ __func__); - goto destroy_component; -+ } - - ret = vchiq_mmal_port_set_format(dev->instance, - &ctx->component->output[0]); -- if (ret < 0) -+ if (ret < 0) { -+ v4l2_dbg(1, debug, &dev->v4l2_dev, -+ "%s: vchiq_mmal_port_set_format op port failed\n", -+ __func__); - goto destroy_component; -+ } - - if (dev->role == ENCODE) { - u32 param = 1; -@@ -1812,11 +1820,14 @@ static int bcm2835_codec_create_componen - ctx->q_data[V4L2_M2M_DST].sizeimage, - ctx->component->output[0].minimum_buffer.size); - } -+ v4l2_dbg(2, debug, &dev->v4l2_dev, "%s: component created as %s\n", -+ __func__, components[dev->role]); - - return 0; - - destroy_component: - vchiq_mmal_component_finalise(ctx->dev->instance, ctx->component); -+ ctx->component = NULL; - - return ret; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0372-ASoC-tlv320aic32x4-Update-copyright-and-use-SPDX-ide.patch b/target/linux/brcm2708/patches-4.19/950-0372-ASoC-tlv320aic32x4-Update-copyright-and-use-SPDX-ide.patch new file mode 100644 index 0000000000..b967edafa0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0372-ASoC-tlv320aic32x4-Update-copyright-and-use-SPDX-ide.patch @@ -0,0 +1,70 @@ +From 1ed86adfa457ecd9668f2541dabfebd3ee82d035 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Wed, 3 Apr 2019 21:17:16 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Update copyright and use SPDX + identifier + +commit 8a1d95c393d971e624fc28f11516b0bc3a7fa706 upstream. + +Update the copyright dates and use the SPDX identifier instead +of reciting the license. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4-i2c.c | 14 ++------------ + sound/soc/codecs/tlv320aic32x4-spi.c | 14 ++------------ + 2 files changed, 4 insertions(+), 24 deletions(-) + +--- a/sound/soc/codecs/tlv320aic32x4-i2c.c ++++ b/sound/soc/codecs/tlv320aic32x4-i2c.c +@@ -1,21 +1,11 @@ +-/* +- * linux/sound/soc/codecs/tlv320aic32x4-i2c.c ++/* SPDX-License-Identifier: GPL-2.0 + * +- * Copyright 2011 NW Digital Radio ++ * Copyright 2011-2019 NW Digital Radio + * + * Author: Annaliese McDermond + * + * Based on sound/soc/codecs/wm8974 and TI driver for kernel 2.6.27. + * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. + */ + + #include +--- a/sound/soc/codecs/tlv320aic32x4-spi.c ++++ b/sound/soc/codecs/tlv320aic32x4-spi.c +@@ -1,21 +1,11 @@ +-/* +- * linux/sound/soc/codecs/tlv320aic32x4-spi.c ++/* SPDX-License-Identifier: GPL-2.0 + * +- * Copyright 2011 NW Digital Radio ++ * Copyright 2011-2019 NW Digital Radio + * + * Author: Annaliese McDermond + * + * Based on sound/soc/codecs/wm8974 and TI driver for kernel 2.6.27. + * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. + */ + + #include diff --git a/target/linux/brcm2708/patches-4.19/950-0372-staging-vc-sm-cma-Remove-the-debugfs-directory-on-re.patch b/target/linux/brcm2708/patches-4.19/950-0372-staging-vc-sm-cma-Remove-the-debugfs-directory-on-re.patch deleted file mode 100644 index 4d16388828..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0372-staging-vc-sm-cma-Remove-the-debugfs-directory-on-re.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 4857371a7cc5d371b1e4221fa38848716a779eb1 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 8 Mar 2019 10:49:17 +0000 -Subject: [PATCH 372/806] staging: vc-sm-cma: Remove the debugfs directory on - remove - -Without removing that, reloading the driver fails. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -757,7 +757,7 @@ static int bcm2835_vc_sm_cma_remove(stru - pr_debug("[%s]: start\n", __func__); - if (sm_inited) { - /* Remove all proc entries. */ -- //debugfs_remove_recursive(sm_state->dir_root); -+ debugfs_remove_recursive(sm_state->dir_root); - - /* Stop the videocore shared memory service. */ - vc_sm_cma_vchi_stop(&sm_state->sm_handle); diff --git a/target/linux/brcm2708/patches-4.19/950-0373-ASoC-tlv320aic32x4-Add-Switch-for-Setting-Common-Mod.patch b/target/linux/brcm2708/patches-4.19/950-0373-ASoC-tlv320aic32x4-Add-Switch-for-Setting-Common-Mod.patch new file mode 100644 index 0000000000..1d57237059 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0373-ASoC-tlv320aic32x4-Add-Switch-for-Setting-Common-Mod.patch @@ -0,0 +1,40 @@ +From 0962637c67a56c1ae42ccb14c9e71c62f4aa1403 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Wed, 3 Apr 2019 21:01:54 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Add Switch for Setting Common + Mode Voltage + +commit 44ceee847e27c828f2f1ef4e400e6bc0c8d04de3 upstream. + +Add a switch for setting common mode voltage. This can allow +for higher drive levels on the amplifier outputs. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -242,6 +242,12 @@ static DECLARE_TLV_DB_SCALE(tlv_driver_g + /* -12dB min, 0.5dB steps */ + static DECLARE_TLV_DB_SCALE(tlv_adc_vol, -1200, 50, 0); + ++static const char * const lo_cm_text[] = { ++ "Full Chip", "1.65V", ++}; ++ ++static SOC_ENUM_SINGLE_DECL(lo_cm_enum, AIC32X4_CMMODE, 3, lo_cm_text); ++ + static const struct snd_kcontrol_new aic32x4_snd_controls[] = { + SOC_DOUBLE_R_S_TLV("PCM Playback Volume", AIC32X4_LDACVOL, + AIC32X4_RDACVOL, 0, -0x7f, 0x30, 7, 0, tlv_pcm), +@@ -255,6 +261,7 @@ static const struct snd_kcontrol_new aic + AIC32X4_HPRGAIN, 6, 0x01, 1), + SOC_DOUBLE_R("LO DAC Playback Switch", AIC32X4_LOLGAIN, + AIC32X4_LORGAIN, 6, 0x01, 1), ++ SOC_ENUM("LO Playback Common Mode Switch", lo_cm_enum), + SOC_DOUBLE_R("Mic PGA Switch", AIC32X4_LMICPGAVOL, + AIC32X4_RMICPGAVOL, 7, 0x01, 1), + diff --git a/target/linux/brcm2708/patches-4.19/950-0373-staging-vc-sm-cma-Use-devm_-allocs-for-sm_state.patch b/target/linux/brcm2708/patches-4.19/950-0373-staging-vc-sm-cma-Use-devm_-allocs-for-sm_state.patch deleted file mode 100644 index 3043111ead..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0373-staging-vc-sm-cma-Use-devm_-allocs-for-sm_state.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 6214831525192a9eb665c67fe8c93006c17acbad Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 8 Mar 2019 11:06:41 +0000 -Subject: [PATCH 373/806] staging: vc-sm-cma: Use devm_ allocs for sm_state. - -Use managed allocations for sm_state, removing reliance on -manual management. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 12 +++++------- - 1 file changed, 5 insertions(+), 7 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -656,7 +656,7 @@ static void vc_sm_connected_init(void) - __func__, ret); - - ret = -EIO; -- goto err_free_mem; -+ goto err_failed; - } - - ret = vchi_connect(NULL, 0, vchi_instance); -@@ -665,7 +665,7 @@ static void vc_sm_connected_init(void) - __func__, ret); - - ret = -EIO; -- goto err_free_mem; -+ goto err_failed; - } - - /* Initialize an instance of the shared memory service. */ -@@ -676,7 +676,7 @@ static void vc_sm_connected_init(void) - __func__); - - ret = -EPERM; -- goto err_free_mem; -+ goto err_failed; - } - - /* Create a debug fs directory entry (root). */ -@@ -722,8 +722,7 @@ err_remove_shared_memory: - debugfs_remove_recursive(sm_state->dir_root); - err_stop_sm_service: - vc_sm_cma_vchi_stop(&sm_state->sm_handle); --err_free_mem: -- kfree(sm_state); -+err_failed: - pr_info("[%s]: failed, ret %d\n", __func__, ret); - } - -@@ -732,7 +731,7 @@ static int bcm2835_vc_sm_cma_probe(struc - { - pr_info("%s: Videocore shared memory driver\n", __func__); - -- sm_state = kzalloc(sizeof(*sm_state), GFP_KERNEL); -+ sm_state = devm_kzalloc(&pdev->dev, sizeof(*sm_state), GFP_KERNEL); - if (!sm_state) - return -ENOMEM; - sm_state->pdev = pdev; -@@ -766,7 +765,6 @@ static int bcm2835_vc_sm_cma_remove(stru - - /* Free the memory for the state structure. */ - mutex_destroy(&sm_state->map_lock); -- kfree(sm_state); - } - - pr_debug("[%s]: end\n", __func__); diff --git a/target/linux/brcm2708/patches-4.19/950-0374-ASoC-tlv320aic32x4-Add-Playback-PowerTune-Controls.patch b/target/linux/brcm2708/patches-4.19/950-0374-ASoC-tlv320aic32x4-Add-Playback-PowerTune-Controls.patch new file mode 100644 index 0000000000..98514255df --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0374-ASoC-tlv320aic32x4-Add-Playback-PowerTune-Controls.patch @@ -0,0 +1,52 @@ +From 6e5099288c946037476abd1488e4c7ab6b818e2b Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Wed, 3 Apr 2019 21:01:55 -0700 +Subject: [PATCH] ASoC: tlv320aic32x4: Add Playback PowerTune Controls + +commit d3e6e374566e1154820a9a3dc82f7eef646fcf95 upstream. + +PowerTune controls the power level of the chip. On playback this +indirectly controls things like the gain of the various output +amplifiers. This can allow for the decrease of output levels +from the codec. This adds controls for those power levels to +the driver. + +Signed-off-by: Annaliese McDermond +Signed-off-by: Mark Brown +--- + sound/soc/codecs/tlv320aic32x4.c | 9 +++++++++ + sound/soc/codecs/tlv320aic32x4.h | 2 ++ + 2 files changed, 11 insertions(+) + +--- a/sound/soc/codecs/tlv320aic32x4.c ++++ b/sound/soc/codecs/tlv320aic32x4.c +@@ -248,9 +248,18 @@ static const char * const lo_cm_text[] = + + static SOC_ENUM_SINGLE_DECL(lo_cm_enum, AIC32X4_CMMODE, 3, lo_cm_text); + ++static const char * const ptm_text[] = { ++ "P3", "P2", "P1", ++}; ++ ++static SOC_ENUM_SINGLE_DECL(l_ptm_enum, AIC32X4_LPLAYBACK, 2, ptm_text); ++static SOC_ENUM_SINGLE_DECL(r_ptm_enum, AIC32X4_RPLAYBACK, 2, ptm_text); ++ + static const struct snd_kcontrol_new aic32x4_snd_controls[] = { + SOC_DOUBLE_R_S_TLV("PCM Playback Volume", AIC32X4_LDACVOL, + AIC32X4_RDACVOL, 0, -0x7f, 0x30, 7, 0, tlv_pcm), ++ SOC_ENUM("DAC Left Playback PowerTune Switch", l_ptm_enum), ++ SOC_ENUM("DAC Right Playback PowerTune Switch", r_ptm_enum), + SOC_DOUBLE_R_S_TLV("HP Driver Gain Volume", AIC32X4_HPLGAIN, + AIC32X4_HPRGAIN, 0, -0x6, 0x1d, 5, 0, + tlv_driver_gain), +--- a/sound/soc/codecs/tlv320aic32x4.h ++++ b/sound/soc/codecs/tlv320aic32x4.h +@@ -78,6 +78,8 @@ int aic32x4_register_clocks(struct devic + + #define AIC32X4_PWRCFG AIC32X4_REG(1, 1) + #define AIC32X4_LDOCTL AIC32X4_REG(1, 2) ++#define AIC32X4_LPLAYBACK AIC32X4_REG(1, 3) ++#define AIC32X4_RPLAYBACK AIC32X4_REG(1, 4) + #define AIC32X4_OUTPWRCTL AIC32X4_REG(1, 9) + #define AIC32X4_CMMODE AIC32X4_REG(1, 10) + #define AIC32X4_HPLROUTE AIC32X4_REG(1, 12) diff --git a/target/linux/brcm2708/patches-4.19/950-0374-staging-vc-sm-cma-Don-t-fail-if-debugfs-calls-fail.patch b/target/linux/brcm2708/patches-4.19/950-0374-staging-vc-sm-cma-Don-t-fail-if-debugfs-calls-fail.patch deleted file mode 100644 index 6ad01d26a5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0374-staging-vc-sm-cma-Don-t-fail-if-debugfs-calls-fail.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 13572df6bba85d8fc91a212faa89b5b6147bdf94 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 8 Mar 2019 11:09:49 +0000 -Subject: [PATCH 374/806] staging: vc-sm-cma: Don't fail if debugfs calls fail. - -Return codes from debugfs calls should never alter the -flow of the main code. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 8 -------- - 1 file changed, 8 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -681,13 +681,6 @@ static void vc_sm_connected_init(void) - - /* Create a debug fs directory entry (root). */ - sm_state->dir_root = debugfs_create_dir(VC_SM_DIR_ROOT_NAME, NULL); -- if (!sm_state->dir_root) { -- pr_err("[%s]: failed to create \'%s\' directory entry\n", -- __func__, VC_SM_DIR_ROOT_NAME); -- -- ret = -EPERM; -- goto err_stop_sm_service; -- } - - sm_state->dir_state.show = &vc_sm_cma_global_state_show; - sm_state->dir_state.dir_entry = -@@ -720,7 +713,6 @@ static void vc_sm_connected_init(void) - - err_remove_shared_memory: - debugfs_remove_recursive(sm_state->dir_root); --err_stop_sm_service: - vc_sm_cma_vchi_stop(&sm_state->sm_handle); - err_failed: - pr_info("[%s]: failed, ret %d\n", __func__, ret); diff --git a/target/linux/brcm2708/patches-4.19/950-0375-dtoverlays-Add-Support-for-the-UDRC-DRAWS.patch b/target/linux/brcm2708/patches-4.19/950-0375-dtoverlays-Add-Support-for-the-UDRC-DRAWS.patch new file mode 100644 index 0000000000..ecc637c3a2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0375-dtoverlays-Add-Support-for-the-UDRC-DRAWS.patch @@ -0,0 +1,445 @@ +From 1d3aeba25b10d1ed2b5ae4cf0b535d821539a531 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Sun, 17 Mar 2019 16:48:36 -0700 +Subject: [PATCH] dtoverlays: Add Support for the UDRC/DRAWS + +Adds a new overlay to support the Northwest Digital Radio +DRAWS and UDRC HATs. See http://nwdigitalradio.com. + +Signed-off-by: Annaliese McDermond +--- + arch/arm/boot/dts/overlays/Makefile | 2 + + arch/arm/boot/dts/overlays/README | 59 ++++++ + arch/arm/boot/dts/overlays/draws-overlay.dts | 200 +++++++++++++++++++ + arch/arm/boot/dts/overlays/udrc-overlay.dts | 128 ++++++++++++ + 4 files changed, 389 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/draws-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/udrc-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -29,6 +29,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + dionaudio-loco-v2.dtbo \ + dpi18.dtbo \ + dpi24.dtbo \ ++ draws.dtbo \ + dwc-otg.dtbo \ + dwc2.dtbo \ + enc28j60.dtbo \ +@@ -146,6 +147,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + tpm-slb9670.dtbo \ + uart0.dtbo \ + uart1.dtbo \ ++ udrc.dtbo \ + upstream.dtbo \ + upstream-aux-interrupt.dtbo \ + vc4-fkms-v3d.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -531,6 +531,59 @@ Load: dtoverlay=dpi24 + Params: + + ++Name: draws ++Info: Configures the NW Digital Radio DRAWS Hat ++ ++ The board includes an ADC to measure various board values and also ++ provides two analog user inputs on the expansion header. The ADC ++ can be configured for various sample rates and gain values to adjust ++ the input range. Tables describing the two parameters follow. ++ ++ ADC Gain Values: ++ 0 = +/- 6.144V ++ 1 = +/- 4.096V ++ 2 = +/- 2.048V ++ 3 = +/- 1.024V ++ 4 = +/- 0.512V ++ 5 = +/- 0.256V ++ 6 = +/- 0.256V ++ 7 = +/- 0.256V ++ ++ ADC Datarate Values: ++ 0 = 128sps ++ 1 = 250sps ++ 2 = 490sps ++ 3 = 920sps ++ 4 = 1600sps (default) ++ 5 = 2400sps ++ 6 = 3300sps ++ 7 = 3300sps ++Load: dtoverlay=draws,= ++Params: draws_adc_ch4_gain Sets the full scale resolution of the ADCs ++ input voltage sensor (default 1) ++ ++ draws_adc_ch4_datarate Sets the datarate of the ADCs input voltage ++ sensor ++ ++ draws_adc_ch5_gain Sets the full scale resolution of the ADCs ++ 5V rail voltage sensor (default 1) ++ ++ draws_adc_ch5_datarate Sets the datarate of the ADCs 4V rail voltage ++ sensor ++ ++ draws_adc_ch6_gain Sets the full scale resolution of the ADCs ++ AIN2 input (default 2) ++ ++ draws_adc_ch6_datarate Sets the datarate of the ADCs AIN2 input ++ ++ draws_adc_ch7_gain Sets the full scale resolution of the ADCs ++ AIN3 input (default 2) ++ ++ draws_adc_ch7_datarate Sets the datarate of the ADCs AIN3 input ++ ++ alsaname Name of the ALSA audio device (default "draws") ++ ++ + Name: dwc-otg + Info: Selects the dwc_otg USB controller driver which has fiq support. This + is the default on all except the Pi Zero which defaults to dwc2. +@@ -2117,6 +2170,12 @@ Params: txd1_pin GPIO pin + rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) + + ++Name: udrc ++Info: Configures the NW Digital Radio UDRC Hat ++Load: dtoverlay=udrc,= ++Params: alsaname Name of the ALSA audio device (default "udrc") ++ ++ + Name: upstream + Info: Allow usage of downstream .dtb with upstream kernel. Comprises + vc4-kms-v3d, dwc2 and upstream-aux-interrupt overlays. +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/draws-overlay.dts +@@ -0,0 +1,200 @@ ++#include ++/* ++ * Device tree overlay for the DRAWS Hardware ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ udrc0_ldoin: udrc0_ldoin { ++ compatible = "regulator-fixed"; ++ regulator-name = "ldoin"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ }; ++ ++ pps: pps { ++ compatible = "pps-gpio"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pps_pins>; ++ gpios = <&gpio 7 0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ tlv320aic32x4: tlv320aic32x4@18 { ++ compatible = "ti,tlv320aic32x4"; ++ reg = <0x18>; ++ #sound-dai-cells = <0>; ++ status = "okay"; ++ ++ clocks = <&clocks BCM2835_CLOCK_GP0>; ++ clock-names = "mclk"; ++ assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; ++ assigned-clock-rates = <25000000>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gpclk0_pin &aic3204_reset>; ++ ++ reset-gpios = <&gpio 13 0>; ++ ++ iov-supply = <&udrc0_ldoin>; ++ ldoin-supply = <&udrc0_ldoin>; ++ }; ++ ++ sc16is752: sc16is752@50 { ++ compatible = "nxp,sc16is752"; ++ reg = <0x50>; ++ clocks = <&sc16is752_clk>; ++ interrupt-parent = <&gpio>; ++ interrupts = <17 2>; /* IRQ_TYPE_EDGE_FALLING */ ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sc16is752_irq>; ++ ++ sc16is752_clk: sc16is752_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <1843200>; ++ }; ++ }; ++ ++ tla2024: tla2024@48 { ++ compatible = "ti,ads1015"; ++ reg = <0x48>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ adc_ch4: channel@4 { ++ reg = <4>; ++ ti,gain = <1>; ++ ti,datarate = <4>; ++ }; ++ ++ adc_ch5: channel@5 { ++ reg = <5>; ++ ti,gain = <1>; ++ ti,datarate = <4>; ++ }; ++ ++ adc_ch6: channel@6 { ++ reg = <6>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ ++ adc_ch7: channel@7 { ++ reg = <7>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&sound>; ++ snd: __overlay__ { ++ compatible = "simple-audio-card"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ ++ simple-audio-card,name = "draws"; ++ simple-audio-card,format = "i2s"; ++ ++ simple-audio-card,bitclock-master = <&dailink0_master>; ++ simple-audio-card,frame-master = <&dailink0_master>; ++ ++ simple-audio-card,widgets = ++ "Line", "Line In", ++ "Line", "Line Out"; ++ ++ simple-audio-card,routing = ++ "IN1_R", "Line In", ++ "IN1_L", "Line In", ++ "CM_L", "Line In", ++ "CM_R", "Line In", ++ "Line Out", "LOR", ++ "Line Out", "LOL"; ++ ++ dailink0_master: simple-audio-card,cpu { ++ sound-dai = <&i2s>; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&tlv320aic32x4>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&gpio>; ++ __overlay__ { ++ gpclk0_pin: gpclk0_pin { ++ brcm,pins = <4>; ++ brcm,function = <4>; ++ }; ++ ++ aic3204_reset: aic3204_reset { ++ brcm,pins = <13>; ++ brcm,function = <1>; ++ brcm,pull = <1>; ++ }; ++ ++ aic3204_gpio: aic3204_gpio { ++ brcm,pins = <26>; ++ }; ++ ++ sc16is752_irq: sc16is752_irq { ++ brcm,pins = <17>; ++ brcm,function = <0>; ++ brcm,pull = <2>; ++ }; ++ ++ pps_pins: pps_pins { ++ brcm,pins = <7>; ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ draws_adc_ch4_gain = <&adc_ch4>,"ti,gain:0"; ++ draws_adc_ch4_datarate = <&adc_ch4>,"ti,datarate:0"; ++ draws_adc_ch5_gain = <&adc_ch5>,"ti,gain:0"; ++ draws_adc_ch5_datarate = <&adc_ch5>,"ti,datarate:0"; ++ draws_adc_ch6_gain = <&adc_ch6>,"ti,gain:0"; ++ draws_adc_ch6_datarate = <&adc_ch6>,"ti,datarate:0"; ++ draws_adc_ch7_gain = <&adc_ch7>,"ti,gain:0"; ++ draws_adc_ch7_datarate = <&adc_ch7>,"ti,datarate:0"; ++ alsaname = <&snd>, "simple-audio-card,name"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/udrc-overlay.dts +@@ -0,0 +1,128 @@ ++#include ++/* ++ * Device tree overlay for the Universal Digital Radio Controller ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ clocks = <&clocks BCM2835_CLOCK_PCM>; ++ clock-names = "pcm"; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ udrc0_ldoin: udrc0_ldoin { ++ compatible = "regulator-fixed"; ++ regulator-name = "ldoin"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ clock-frequency = <400000>; ++ ++ tlv320aic32x4: tlv320aic32x4@18 { ++ compatible = "ti,tlv320aic32x4"; ++ #sound-dai-cells = <0>; ++ reg = <0x18>; ++ status = "okay"; ++ ++ clocks = <&clocks BCM2835_CLOCK_GP0>; ++ clock-names = "mclk"; ++ assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; ++ assigned-clock-rates = <25000000>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gpclk0_pin &aic3204_reset>; ++ ++ reset-gpios = <&gpio 13 0>; ++ ++ iov-supply = <&udrc0_ldoin>; ++ ldoin-supply = <&udrc0_ldoin>; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&sound>; ++ snd: __overlay__ { ++ compatible = "simple-audio-card"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ ++ simple-audio-card,name = "udrc"; ++ simple-audio-card,format = "i2s"; ++ ++ simple-audio-card,bitclock-master = <&dailink0_master>; ++ simple-audio-card,frame-master = <&dailink0_master>; ++ ++ simple-audio-card,widgets = ++ "Line", "Line In", ++ "Line", "Line Out"; ++ ++ simple-audio-card,routing = ++ "IN1_R", "Line In", ++ "IN1_L", "Line In", ++ "CM_L", "Line In", ++ "CM_R", "Line In", ++ "Line Out", "LOR", ++ "Line Out", "LOL"; ++ ++ dailink0_master: simple-audio-card,cpu { ++ sound-dai = <&i2s>; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&tlv320aic32x4>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&gpio>; ++ __overlay__ { ++ gpclk0_pin: gpclk0_pin { ++ brcm,pins = <4>; ++ brcm,function = <4>; ++ }; ++ ++ aic3204_reset: aic3204_reset { ++ brcm,pins = <13>; ++ brcm,function = <1>; ++ brcm,pull = <1>; ++ }; ++ ++ aic3204_gpio: aic3204_gpio { ++ brcm,pins = <26>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ alsaname = <&snd>, "simple-audio-card,name"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0375-staging-vc-sm-cma-Ensure-mutex-and-idr-are-destroyed.patch b/target/linux/brcm2708/patches-4.19/950-0375-staging-vc-sm-cma-Ensure-mutex-and-idr-are-destroyed.patch deleted file mode 100644 index 000248a4e2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0375-staging-vc-sm-cma-Ensure-mutex-and-idr-are-destroyed.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 4027b08d96c68919f51c768a23877283ef5aefb9 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 8 Mar 2019 11:11:46 +0000 -Subject: [PATCH 375/806] staging: vc-sm-cma: Ensure mutex and idr are - destroyed - -map_lock and kernelid_map are created in probe, but not released -in release should the vcsm service not connect (eg running the -cutdown firmware). - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -752,7 +752,9 @@ static int bcm2835_vc_sm_cma_remove(stru - - /* Stop the videocore shared memory service. */ - vc_sm_cma_vchi_stop(&sm_state->sm_handle); -+ } - -+ if (sm_state) { - idr_destroy(&sm_state->kernelid_map); - - /* Free the memory for the state structure. */ diff --git a/target/linux/brcm2708/patches-4.19/950-0376-dwc_otg-only-do_split-when-we-actually-need-to-do-a-.patch b/target/linux/brcm2708/patches-4.19/950-0376-dwc_otg-only-do_split-when-we-actually-need-to-do-a-.patch new file mode 100644 index 0000000000..d2a9973fa8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0376-dwc_otg-only-do_split-when-we-actually-need-to-do-a-.patch @@ -0,0 +1,55 @@ +From 0c988aed71773be4481b886ccf03c40a52f57cdb Mon Sep 17 00:00:00 2001 +From: P33M +Date: Mon, 8 Apr 2019 12:45:23 +0100 +Subject: [PATCH] dwc_otg: only do_split when we actually need to do a + split + +The previous test would fail if the root port was in fullspeed mode +and there was a hub between the FS device and the root port. While +the transfer worked, the schedule mangling performed for high-speed +split transfers would break leading to an 8ms polling interval. +--- + drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c | 9 ++++----- + 1 file changed, 4 insertions(+), 5 deletions(-) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c +@@ -167,8 +167,10 @@ void qh_init(dwc_otg_hcd_t * hcd, dwc_ot + char *speed, *type; + int dev_speed; + uint32_t hub_addr, hub_port; ++ hprt0_data_t hprt; + + dwc_memset(qh, 0, sizeof(dwc_otg_qh_t)); ++ hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); + + /* Initialize QH */ + qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); +@@ -191,9 +193,8 @@ void qh_init(dwc_otg_hcd_t * hcd, dwc_ot + + qh->nak_frame = 0xffff; + +- if (((dev_speed == USB_SPEED_LOW) || +- (dev_speed == USB_SPEED_FULL)) && +- (hub_addr != 0 && hub_addr != 1)) { ++ if (hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED && ++ dev_speed != USB_SPEED_HIGH) { + DWC_DEBUGPL(DBG_HCD, + "QH init: EP %d: TT found at hub addr %d, for port %d\n", + dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr, +@@ -204,7 +205,6 @@ void qh_init(dwc_otg_hcd_t * hcd, dwc_ot + + if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) { + /* Compute scheduling parameters once and save them. */ +- hprt0_data_t hprt; + + /** @todo Account for split transfers in the bus time. */ + int bytecount = +@@ -219,7 +219,6 @@ void qh_init(dwc_otg_hcd_t * hcd, dwc_ot + SCHEDULE_SLOP); + qh->interval = urb->interval; + +- hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); + if (hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) { + if (dev_speed == USB_SPEED_LOW || + dev_speed == USB_SPEED_FULL) { diff --git a/target/linux/brcm2708/patches-4.19/950-0376-staging-bcm2835_codec-Clean-up-logging-on-unloading-.patch b/target/linux/brcm2708/patches-4.19/950-0376-staging-bcm2835_codec-Clean-up-logging-on-unloading-.patch deleted file mode 100644 index c1a89ebf49..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0376-staging-bcm2835_codec-Clean-up-logging-on-unloading-.patch +++ /dev/null @@ -1,49 +0,0 @@ -From c42ae04bb6ed5be61d3b3e2e2c6004ae252ee34a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 8 Mar 2019 11:26:00 +0000 -Subject: [PATCH 376/806] staging: bcm2835_codec: Clean up logging on unloading - the driver - -The log line was missing a closing \n, so wasn't added to the -log immediately. -Adds the function of the V4L2 device that is being unregistered -too. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -77,6 +77,12 @@ enum bcm2835_codec_role { - ISP, - }; - -+const static char *roles[] = { -+ "decode", -+ "encode", -+ "isp" -+}; -+ - static const char * const components[] = { - "ril.video_decode", - "ril.video_encode", -@@ -2522,7 +2528,6 @@ static int bcm2835_codec_create(struct p - struct video_device *vfd; - int video_nr; - int ret; -- const static char *roles[] = {"decode", "encode", "isp"}; - - dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); - if (!dev) -@@ -2615,7 +2620,8 @@ static int bcm2835_codec_destroy(struct - if (!dev) - return -ENODEV; - -- v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME); -+ v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME ", %s\n", -+ roles[dev->role]); - v4l2_m2m_release(dev->m2m_dev); - video_unregister_device(&dev->vfd); - v4l2_device_unregister(&dev->v4l2_dev); diff --git a/target/linux/brcm2708/patches-4.19/950-0377-Input-ili210x-fetch-touchscreen-geometry-from-DT.patch b/target/linux/brcm2708/patches-4.19/950-0377-Input-ili210x-fetch-touchscreen-geometry-from-DT.patch new file mode 100644 index 0000000000..84c99ffa5a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0377-Input-ili210x-fetch-touchscreen-geometry-from-DT.patch @@ -0,0 +1,490 @@ +From 9c823e2ee1ec1b815b8ec29c231b112c5e397202 Mon Sep 17 00:00:00 2001 +From: Samuel Hsu +Date: Mon, 8 Apr 2019 16:42:17 +0200 +Subject: [PATCH] Input: ili210x - fetch touchscreen geometry from DT + +commit f67cc3e927d8414ad3872e046764534ea1f5db0d upstream + +Fetching the geometry from the ILI251x registers seems unreliable and +sometimes returns all zeroes. Add support for fetching the geometry and +axis inversion from DT instead. + +Signed-off-by: Marek Vasut +Signed-off-by: Dmitry Torokhov +--- + drivers/input/touchscreen/ili210x.c | 321 +++++++++++++++++----------- + 1 file changed, 194 insertions(+), 127 deletions(-) + +--- a/drivers/input/touchscreen/ili210x.c ++++ b/drivers/input/touchscreen/ili210x.c +@@ -4,11 +4,15 @@ + #include + #include + #include ++#include + #include + #include +-#include ++#include ++#include ++#include + +-#define MAX_TOUCHES 2 ++#define ILI210X_TOUCHES 2 ++#define ILI251X_TOUCHES 10 + #define DEFAULT_POLL_PERIOD 20 + + /* Touchscreen commands */ +@@ -17,41 +21,32 @@ + #define REG_FIRMWARE_VERSION 0x40 + #define REG_CALIBRATE 0xcc + +-struct finger { +- u8 x_low; +- u8 x_high; +- u8 y_low; +- u8 y_high; +-} __packed; +- +-struct touchdata { +- u8 status; +- struct finger finger[MAX_TOUCHES]; +-} __packed; +- +-struct panel_info { +- struct finger finger_max; +- u8 xchannel_num; +- u8 ychannel_num; +-} __packed; +- + struct firmware_version { + u8 id; + u8 major; + u8 minor; + } __packed; + ++enum ili2xxx_model { ++ MODEL_ILI210X, ++ MODEL_ILI251X, ++}; ++ + struct ili210x { + struct i2c_client *client; + struct input_dev *input; +- bool (*get_pendown_state)(void); + unsigned int poll_period; + struct delayed_work dwork; ++ struct gpio_desc *reset_gpio; ++ struct touchscreen_properties prop; ++ enum ili2xxx_model model; ++ unsigned int max_touches; + }; + + static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, + size_t len) + { ++ struct ili210x *priv = i2c_get_clientdata(client); + struct i2c_msg msg[2] = { + { + .addr = client->addr, +@@ -67,7 +62,38 @@ static int ili210x_read_reg(struct i2c_c + } + }; + +- if (i2c_transfer(client->adapter, msg, 2) != 2) { ++ if (priv->model == MODEL_ILI251X) { ++ if (i2c_transfer(client->adapter, msg, 1) != 1) { ++ dev_err(&client->dev, "i2c transfer failed\n"); ++ return -EIO; ++ } ++ ++ usleep_range(5000, 5500); ++ ++ if (i2c_transfer(client->adapter, msg + 1, 1) != 1) { ++ dev_err(&client->dev, "i2c transfer failed\n"); ++ return -EIO; ++ } ++ } else { ++ if (i2c_transfer(client->adapter, msg, 2) != 2) { ++ dev_err(&client->dev, "i2c transfer failed\n"); ++ return -EIO; ++ } ++ } ++ ++ return 0; ++} ++ ++static int ili210x_read(struct i2c_client *client, void *buf, size_t len) ++{ ++ struct i2c_msg msg = { ++ .addr = client->addr, ++ .flags = I2C_M_RD, ++ .len = len, ++ .buf = buf, ++ }; ++ ++ if (i2c_transfer(client->adapter, &msg, 1) != 1) { + dev_err(&client->dev, "i2c transfer failed\n"); + return -EIO; + } +@@ -75,42 +101,72 @@ static int ili210x_read_reg(struct i2c_c + return 0; + } + +-static void ili210x_report_events(struct input_dev *input, +- const struct touchdata *touchdata) ++static bool ili210x_touchdata_to_coords(struct ili210x *priv, u8 *touchdata, ++ unsigned int finger, ++ unsigned int *x, unsigned int *y) + { +- int i; +- bool touch; +- unsigned int x, y; +- const struct finger *finger; ++ if (finger >= ILI210X_TOUCHES) ++ return false; + +- for (i = 0; i < MAX_TOUCHES; i++) { +- input_mt_slot(input, i); ++ if (touchdata[0] & BIT(finger)) ++ return false; + +- finger = &touchdata->finger[i]; ++ *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); ++ *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); + +- touch = touchdata->status & (1 << i); +- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); +- if (touch) { +- x = finger->x_low | (finger->x_high << 8); +- y = finger->y_low | (finger->y_high << 8); ++ return true; ++} ++ ++static bool ili251x_touchdata_to_coords(struct ili210x *priv, u8 *touchdata, ++ unsigned int finger, ++ unsigned int *x, unsigned int *y) ++{ ++ if (finger >= ILI251X_TOUCHES) ++ return false; ++ ++ *x = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); ++ if (!(*x & BIT(15))) /* Touch indication */ ++ return false; ++ ++ *x &= 0x3fff; ++ *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2); ++ ++ return true; ++} ++ ++static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata) ++{ ++ struct input_dev *input = priv->input; ++ int i; ++ bool contact = false, touch = false; ++ unsigned int x = 0, y = 0; + +- input_report_abs(input, ABS_MT_POSITION_X, x); +- input_report_abs(input, ABS_MT_POSITION_Y, y); ++ for (i = 0; i < priv->max_touches; i++) { ++ if (priv->model == MODEL_ILI210X) { ++ touch = ili210x_touchdata_to_coords(priv, touchdata, ++ i, &x, &y); ++ } else if (priv->model == MODEL_ILI251X) { ++ touch = ili251x_touchdata_to_coords(priv, touchdata, ++ i, &x, &y); ++ if (touch) ++ contact = true; + } ++ ++ input_mt_slot(input, i); ++ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); ++ if (!touch) ++ continue; ++ touchscreen_report_pos(input, &priv->prop, x, y, ++ true); + } + + input_mt_report_pointer_emulation(input, false); + input_sync(input); +-} + +-static bool get_pendown_state(const struct ili210x *priv) +-{ +- bool state = false; +- +- if (priv->get_pendown_state) +- state = priv->get_pendown_state(); ++ if (priv->model == MODEL_ILI210X) ++ contact = touchdata[0] & 0xf3; + +- return state; ++ return contact; + } + + static void ili210x_work(struct work_struct *work) +@@ -118,20 +174,29 @@ static void ili210x_work(struct work_str + struct ili210x *priv = container_of(work, struct ili210x, + dwork.work); + struct i2c_client *client = priv->client; +- struct touchdata touchdata; +- int error; ++ u8 touchdata[64] = { 0 }; ++ bool touch; ++ int error = -EINVAL; ++ ++ if (priv->model == MODEL_ILI210X) { ++ error = ili210x_read_reg(client, REG_TOUCHDATA, ++ touchdata, sizeof(touchdata)); ++ } else if (priv->model == MODEL_ILI251X) { ++ error = ili210x_read_reg(client, REG_TOUCHDATA, ++ touchdata, 31); ++ if (!error && touchdata[0] == 2) ++ error = ili210x_read(client, &touchdata[31], 20); ++ } + +- error = ili210x_read_reg(client, REG_TOUCHDATA, +- &touchdata, sizeof(touchdata)); + if (error) { + dev_err(&client->dev, + "Unable to get touchdata, err = %d\n", error); + return; + } + +- ili210x_report_events(priv->input, &touchdata); ++ touch = ili210x_report_events(priv, touchdata); + +- if ((touchdata.status & 0xf3) || get_pendown_state(priv)) ++ if (touch) + schedule_delayed_work(&priv->dwork, + msecs_to_jiffies(priv->poll_period)); + } +@@ -180,30 +245,76 @@ static const struct attribute_group ili2 + .attrs = ili210x_attributes, + }; + ++static void ili210x_power_down(void *data) ++{ ++ struct gpio_desc *reset_gpio = data; ++ ++ gpiod_set_value_cansleep(reset_gpio, 1); ++} ++ ++static void ili210x_cancel_work(void *data) ++{ ++ struct ili210x *priv = data; ++ ++ cancel_delayed_work_sync(&priv->dwork); ++} ++ + static int ili210x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) + { + struct device *dev = &client->dev; +- const struct ili210x_platform_data *pdata = dev_get_platdata(dev); + struct ili210x *priv; ++ struct gpio_desc *reset_gpio; + struct input_dev *input; +- struct panel_info panel; + struct firmware_version firmware; +- int xmax, ymax; ++ enum ili2xxx_model model; + int error; + +- dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); ++ model = (enum ili2xxx_model)id->driver_data; + +- if (!pdata) { +- dev_err(dev, "No platform data!\n"); +- return -EINVAL; +- } ++ dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); + + if (client->irq <= 0) { + dev_err(dev, "No IRQ!\n"); + return -EINVAL; + } + ++ reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); ++ if (IS_ERR(reset_gpio)) ++ return PTR_ERR(reset_gpio); ++ ++ if (reset_gpio) { ++ error = devm_add_action_or_reset(dev, ili210x_power_down, ++ reset_gpio); ++ if (error) ++ return error; ++ ++ usleep_range(50, 100); ++ gpiod_set_value_cansleep(reset_gpio, 0); ++ msleep(100); ++ } ++ ++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ input = devm_input_allocate_device(dev); ++ if (!input) ++ return -ENOMEM; ++ ++ priv->client = client; ++ priv->input = input; ++ priv->poll_period = DEFAULT_POLL_PERIOD; ++ INIT_DELAYED_WORK(&priv->dwork, ili210x_work); ++ priv->reset_gpio = reset_gpio; ++ priv->model = model; ++ if (model == MODEL_ILI210X) ++ priv->max_touches = ILI210X_TOUCHES; ++ if (model == MODEL_ILI251X) ++ priv->max_touches = ILI251X_TOUCHES; ++ ++ i2c_set_clientdata(client, priv); ++ + /* Get firmware version */ + error = ili210x_read_reg(client, REG_FIRMWARE_VERSION, + &firmware, sizeof(firmware)); +@@ -213,70 +324,40 @@ static int ili210x_i2c_probe(struct i2c_ + return error; + } + +- /* get panel info */ +- error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel)); +- if (error) { +- dev_err(dev, "Failed to get panel information, err: %d\n", +- error); +- return error; +- } +- +- xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8); +- ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8); +- +- priv = kzalloc(sizeof(*priv), GFP_KERNEL); +- input = input_allocate_device(); +- if (!priv || !input) { +- error = -ENOMEM; +- goto err_free_mem; +- } +- +- priv->client = client; +- priv->input = input; +- priv->get_pendown_state = pdata->get_pendown_state; +- priv->poll_period = pdata->poll_period ? : DEFAULT_POLL_PERIOD; +- INIT_DELAYED_WORK(&priv->dwork, ili210x_work); +- + /* Setup input device */ + input->name = "ILI210x Touchscreen"; + input->id.bustype = BUS_I2C; + input->dev.parent = dev; + +- __set_bit(EV_SYN, input->evbit); +- __set_bit(EV_KEY, input->evbit); +- __set_bit(EV_ABS, input->evbit); +- __set_bit(BTN_TOUCH, input->keybit); +- +- /* Single touch */ +- input_set_abs_params(input, ABS_X, 0, xmax, 0, 0); +- input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0); +- + /* Multi touch */ +- input_mt_init_slots(input, MAX_TOUCHES, 0); +- input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0); +- input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0); ++ input_set_abs_params(input, ABS_MT_POSITION_X, 0, 0xffff, 0, 0); ++ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 0xffff, 0, 0); ++ touchscreen_parse_properties(input, true, &priv->prop); ++ input_mt_init_slots(input, priv->max_touches, INPUT_MT_DIRECT); + +- i2c_set_clientdata(client, priv); ++ error = devm_add_action(dev, ili210x_cancel_work, priv); ++ if (error) ++ return error; + +- error = request_irq(client->irq, ili210x_irq, pdata->irq_flags, +- client->name, priv); ++ error = devm_request_irq(dev, client->irq, ili210x_irq, 0, ++ client->name, priv); + if (error) { + dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", + error); +- goto err_free_mem; ++ return error; + } + +- error = sysfs_create_group(&dev->kobj, &ili210x_attr_group); ++ error = devm_device_add_group(dev, &ili210x_attr_group); + if (error) { + dev_err(dev, "Unable to create sysfs attributes, err: %d\n", + error); +- goto err_free_irq; ++ return error; + } + + error = input_register_device(priv->input); + if (error) { + dev_err(dev, "Cannot register input device, err: %d\n", error); +- goto err_remove_sysfs; ++ return error; + } + + device_init_wakeup(dev, 1); +@@ -286,28 +367,6 @@ static int ili210x_i2c_probe(struct i2c_ + client->irq, firmware.id, firmware.major, firmware.minor); + + return 0; +- +-err_remove_sysfs: +- sysfs_remove_group(&dev->kobj, &ili210x_attr_group); +-err_free_irq: +- free_irq(client->irq, priv); +-err_free_mem: +- input_free_device(input); +- kfree(priv); +- return error; +-} +- +-static int ili210x_i2c_remove(struct i2c_client *client) +-{ +- struct ili210x *priv = i2c_get_clientdata(client); +- +- sysfs_remove_group(&client->dev.kobj, &ili210x_attr_group); +- free_irq(priv->client->irq, priv); +- cancel_delayed_work_sync(&priv->dwork); +- input_unregister_device(priv->input); +- kfree(priv); +- +- return 0; + } + + static int __maybe_unused ili210x_i2c_suspend(struct device *dev) +@@ -334,19 +393,27 @@ static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm, + ili210x_i2c_suspend, ili210x_i2c_resume); + + static const struct i2c_device_id ili210x_i2c_id[] = { +- { "ili210x", 0 }, ++ { "ili210x", MODEL_ILI210X }, ++ { "ili251x", MODEL_ILI251X }, + { } + }; + MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); + ++static const struct of_device_id ili210x_dt_ids[] = { ++ { .compatible = "ilitek,ili210x", .data = (void *)MODEL_ILI210X }, ++ { .compatible = "ilitek,ili251x", .data = (void *)MODEL_ILI251X }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, ili210x_dt_ids); ++ + static struct i2c_driver ili210x_ts_driver = { + .driver = { + .name = "ili210x_i2c", + .pm = &ili210x_i2c_pm, ++ .of_match_table = ili210x_dt_ids, + }, + .id_table = ili210x_i2c_id, + .probe = ili210x_i2c_probe, +- .remove = ili210x_i2c_remove, + }; + + module_i2c_driver(ili210x_ts_driver); diff --git a/target/linux/brcm2708/patches-4.19/950-0378-Input-ili210x-add-DT-binding-document.patch b/target/linux/brcm2708/patches-4.19/950-0378-Input-ili210x-add-DT-binding-document.patch new file mode 100644 index 0000000000..5eb3703b78 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0378-Input-ili210x-add-DT-binding-document.patch @@ -0,0 +1,47 @@ +From 9ee66e1acf33fd1dcf4beb8a6fce4fdade01ab05 Mon Sep 17 00:00:00 2001 +From: Samuel Hsu +Date: Mon, 8 Apr 2019 16:49:51 +0200 +Subject: [PATCH] Input: ili210x - add DT binding document + +commit 41a852e002e65ab7a1e6841b485d72d022e95df2 upstream + +Add DT binding document for the Ilitek ILI210x and ILI251x +touchscreen controllers. + +Signed-off-by: Marek Vasut +Reviewed-by: Rob Herring +Signed-off-by: Dmitry Torokhov +--- + .../bindings/input/ilitek,ili2xxx.txt | 26 +++++++++++++++++++ + 1 file changed, 26 insertions(+) + create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt +@@ -0,0 +1,26 @@ ++Ilitek ILI210x/ILI251x touchscreen controller ++ ++Required properties: ++- compatible: ++ ilitek,ili210x for ILI210x ++ ilitek,ili251x for ILI251x ++ ++- reg: The I2C address of the device ++ ++- interrupts: The sink for the touchscreen's IRQ output ++ See ../interrupt-controller/interrupts.txt ++ ++Optional properties for main touchpad device: ++ ++- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) ++ ++Example: ++ ++ touchscreen@41 { ++ compatible = "ilitek,ili251x"; ++ reg = <0x41>; ++ interrupt-parent = <&gpio4>; ++ interrupts = <7 IRQ_TYPE_EDGE_FALLING>; ++ reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; ++ }; ++ diff --git a/target/linux/brcm2708/patches-4.19/950-0378-bcm2835-sdhost-Allow-for-sg-entries-that-cross-pages.patch b/target/linux/brcm2708/patches-4.19/950-0378-bcm2835-sdhost-Allow-for-sg-entries-that-cross-pages.patch deleted file mode 100644 index 15ac5ac229..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0378-bcm2835-sdhost-Allow-for-sg-entries-that-cross-pages.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 44db7882be675cdf2d89741af5bbeba41b3e25af Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 13 Mar 2019 14:19:11 +0000 -Subject: [PATCH 378/806] bcm2835-sdhost: Allow for sg entries that cross pages - -The dma_complete handling code calculates a virtual address for a page -then adds an offset, but if the offset is more than a page and HIGHMEM -is in use then the summed address could be in an unmapped (or just -incorrect) page. - -The upstream SDHOST driver allows for this possibility - copy the code -that does so. - -Signed-off-by: Phil Elwell ---- - drivers/mmc/host/bcm2835-sdhost.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/mmc/host/bcm2835-sdhost.c -+++ b/drivers/mmc/host/bcm2835-sdhost.c -@@ -543,6 +543,11 @@ static void bcm2835_sdhost_dma_complete( - void *page; - u32 *buf; - -+ if (host->drain_offset & PAGE_MASK) { -+ host->drain_page += host->drain_offset >> PAGE_SHIFT; -+ host->drain_offset &= ~PAGE_MASK; -+ } -+ - page = kmap_atomic(host->drain_page); - buf = page + host->drain_offset; - diff --git a/target/linux/brcm2708/patches-4.19/950-0379-BCM2708-Add-core-Device-Tree-support-ilitek251x.patch b/target/linux/brcm2708/patches-4.19/950-0379-BCM2708-Add-core-Device-Tree-support-ilitek251x.patch new file mode 100644 index 0000000000..0967821a4c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0379-BCM2708-Add-core-Device-Tree-support-ilitek251x.patch @@ -0,0 +1,91 @@ +From c0dfc87e355a7c6e434122e1a4fcc69729970610 Mon Sep 17 00:00:00 2001 +From: Samuel Hsu +Date: Mon, 8 Apr 2019 17:06:44 +0200 +Subject: [PATCH] BCM2708: Add core Device Tree support, ilitek251x + +Signed-off-by: Samuel Hsu +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 11 +++++ + .../boot/dts/overlays/ilitek251x-overlay.dts | 45 +++++++++++++++++++ + 3 files changed, 57 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/ilitek251x-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -67,6 +67,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + i2c0-bcm2708.dtbo \ + i2c1-bcm2708.dtbo \ + i2s-gpio28-31.dtbo \ ++ ilitek251x.dtbo \ + iqaudio-dac.dtbo \ + iqaudio-dacplus.dtbo \ + iqaudio-digi-wm8804-audio.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1146,6 +1146,17 @@ Load: dtoverlay=i2s-gpio28-31 + Params: + + ++Name: ilitek251x ++Info: Enables I2C connected Ilitek 251x multiple touch controller using ++ GPIO 4 (pin 7 on GPIO header) for interrupt. ++Load: dtoverlay=ilitek251x,= ++Params: interrupt GPIO used for interrupt (default 4) ++ sizex Touchscreen size x, horizontal resolution of ++ touchscreen (in pixels) ++ sizey Touchscreen size y, vertical resolution of ++ touchscreen (in pixels) ++ ++ + Name: iqaudio-dac + Info: Configures the IQaudio DAC audio card + Load: dtoverlay=iqaudio-dac, +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ilitek251x-overlay.dts +@@ -0,0 +1,45 @@ ++// Device tree overlay for I2C connected Ilitek multiple touch controller ++/dts-v1/; ++/plugin/; ++ ++ / { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ ili251x_pins: ili251x_pins { ++ brcm,pins = <4>; // interrupt ++ brcm,function = <0>; // in ++ brcm,pull = <2>; // pull-up // ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ ili251x: ili251x@41 { ++ compatible = "ilitek,ili251x"; ++ reg = <0x41>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ili251x_pins>; ++ interrupt-parent = <&gpio>; ++ interrupts = <4 8>; // high-to-low edge triggered ++ touchscreen-size-x = <16384>; ++ touchscreen-size-y = <9600>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ interrupt = <&ili251x_pins>,"brcm,pins:0", ++ <&ili251x>,"interrupts:0"; ++ sizex = <&ili251x>,"touchscreen-size-x:0"; ++ sizey = <&ili251x>,"touchscreen-size-y:0"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0379-overlays-sdio-Added-4-bit-support-on-GPIOs-34-39.-29.patch b/target/linux/brcm2708/patches-4.19/950-0379-overlays-sdio-Added-4-bit-support-on-GPIOs-34-39.-29.patch deleted file mode 100644 index 3de9197d60..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0379-overlays-sdio-Added-4-bit-support-on-GPIOs-34-39.-29.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 7c23c772289fa31960b9e6969499aa93c92d842b Mon Sep 17 00:00:00 2001 -From: Adrien RICCIARDI -Date: Fri, 22 Mar 2019 11:35:30 +0100 -Subject: [PATCH 379/806] overlays: sdio: Added 4-bit support on GPIOs 34-39. - (#2903) - ---- - arch/arm/boot/dts/overlays/README | 3 +++ - arch/arm/boot/dts/overlays/sdio-overlay.dts | 9 +++++++++ - 2 files changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1785,6 +1785,9 @@ Params: sdio_overclock SDIO Clo - gpios_34_37 Select GPIOs 34-37 for 1-bit mode. Must be used - with bus_width=1. - -+ gpios_34_39 Select GPIOs 34-39 for 4-bit mode. Must be used -+ with bus_width=4 (the default). -+ - - Name: sdio-1bit - Info: This overlay is now deprecated. Use ---- a/arch/arm/boot/dts/overlays/sdio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts -@@ -64,6 +64,14 @@ - }; - }; - -+ fragment@5 { -+ target = <&sdio_ovl_pins>; -+ __dormant__ { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ }; -+ - fragment@6 { - target-path = "/aliases"; - __overlay__ { -@@ -77,5 +85,6 @@ - sdio_overclock = <&sdio_ovl>,"brcm,overclock-50:0"; - gpios_22_25 = <0>,"=3"; - gpios_34_37 = <0>,"=4"; -+ gpios_34_39 = <0>,"=5"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0380-dwc_otg-fix-locking-around-dequeueing-and-killing-UR.patch b/target/linux/brcm2708/patches-4.19/950-0380-dwc_otg-fix-locking-around-dequeueing-and-killing-UR.patch new file mode 100644 index 0000000000..53e2c98ce5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0380-dwc_otg-fix-locking-around-dequeueing-and-killing-UR.patch @@ -0,0 +1,63 @@ +From ea7ff2070d564858c445cfdbd883ea00927c0ada Mon Sep 17 00:00:00 2001 +From: P33M +Date: Tue, 9 Apr 2019 16:40:48 +0100 +Subject: [PATCH] dwc_otg: fix locking around dequeueing and killing + URBs + +kill_urbs_in_qh_list() is practically only ever called with the fiq lock +already held, so don't spinlock twice in the case where we need to cancel +an isochronous transfer. + +Also fix up a case where the global interrupt register could be read with +the fiq lock not held. + +Fixes the deadlock seen in https://github.com/raspberrypi/linux/issues/2907 +--- + drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c | 9 +++++++-- + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ---- + 2 files changed, 7 insertions(+), 6 deletions(-) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c +@@ -1344,16 +1344,21 @@ static inline uint32_t dwc_otg_read_comm + */ + gintmsk_common.b.portintr = 1; + } +- gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); +- gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); + if(fiq_enable) { + local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); + /* Pull in the interrupts that the FIQ has masked */ + gintmsk.d32 |= ~(hcd->fiq_state->gintmsk_saved.d32); + gintmsk.d32 |= gintmsk_common.d32; + /* for the upstairs function to reenable - have to read it here in case FIQ triggers again */ + reenable_gintmsk->d32 = gintmsk.d32; ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); + local_fiq_enable(); ++ } else { ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); + } + + gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -195,15 +195,11 @@ static void kill_urbs_in_qh_list(dwc_otg + * but not yet been through the IRQ handler. + */ + if (fiq_fsm_enable && (hcd->fiq_state->channel[qh->channel->hc_num].fsm != FIQ_PASSTHROUGH)) { +- local_fiq_disable(); +- fiq_fsm_spin_lock(&hcd->fiq_state->lock); + qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; + qh->channel->halt_pending = 1; + if (hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_TURBO || + hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) + hcd->fiq_state->channel[n].fsm = FIQ_HS_ISOC_ABORTED; +- fiq_fsm_spin_unlock(&hcd->fiq_state->lock); +- local_fiq_enable(); + } else { + dwc_otg_hc_halt(hcd->core_if, qh->channel, + DWC_OTG_HC_XFER_URB_DEQUEUE); diff --git a/target/linux/brcm2708/patches-4.19/950-0380-overlays-Fix-multiple-instantiation-of-sc16is7xx.patch b/target/linux/brcm2708/patches-4.19/950-0380-overlays-Fix-multiple-instantiation-of-sc16is7xx.patch deleted file mode 100644 index 95455d7cc7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0380-overlays-Fix-multiple-instantiation-of-sc16is7xx.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 649efe5db3900ed3bbfd3c3daa3b96d8fc0b9d68 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 22 Mar 2019 16:44:47 +0000 -Subject: [PATCH 380/806] overlays: Fix multiple-instantiation of sc16is7xx* - -The registration of the fixed clocks uses the node name as the clock -name, causing a clash if two clock nodes have the same name, regardless -of the path to the node. Fix the issue by overwriting the clock node -names using the value of the "addr" parameter, providing a crude -disambiguation. (A bit of string pasting to form "sc16is752_clk_" -would have been nice, but that is outside the abilities of the overlay -parameter mechanism.) - -Also give the sc16is750-i2c overlay the xtal parameter for symmetry. - -See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=235650 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 1 + - arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts | 3 ++- - arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts | 2 +- - 3 files changed, 4 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1725,6 +1725,7 @@ Info: Overlay for the NXP SC16IS750 UA - Load: dtoverlay=sc16is750-i2c,= - Params: int_pin GPIO used for IRQ (default 24) - addr Address (default 0x48) -+ xtal On-board crystal frequency (default 14745600) - - - Name: sc16is752-i2c ---- a/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts -@@ -31,7 +31,8 @@ - - __overrides__ { - int_pin = <&sc16is750>,"interrupts:0"; -- addr = <&sc16is750>,"reg:0"; -+ addr = <&sc16is750>,"reg:0",<&sc16is750_clk>,"name"; -+ xtal = <&sc16is750>,"clock-frequency:0"; - }; - - }; ---- a/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts -@@ -34,7 +34,7 @@ - - __overrides__ { - int_pin = <&sc16is752>,"interrupts:0"; -- addr = <&sc16is752>,"reg:0"; -+ addr = <&sc16is752>,"reg:0",<&sc16is752_clk>,"name"; - xtal = <&sc16is752>,"clock-frequency:0"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0381-rtc-rv3028-Add-backup-switchover-mode-support.patch b/target/linux/brcm2708/patches-4.19/950-0381-rtc-rv3028-Add-backup-switchover-mode-support.patch new file mode 100644 index 0000000000..7eac71099d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0381-rtc-rv3028-Add-backup-switchover-mode-support.patch @@ -0,0 +1,50 @@ +From fb4e195012c405a04b1a7a86e240ceada0c8aa65 Mon Sep 17 00:00:00 2001 +From: Phil Howard +Date: Fri, 29 Mar 2019 10:53:14 +0000 +Subject: [PATCH] rtc: rv3028: Add backup switchover mode support + +Signed-off-by: Phil Howard +--- + drivers/rtc/rtc-rv3028.c | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +--- a/drivers/rtc/rtc-rv3028.c ++++ b/drivers/rtc/rtc-rv3028.c +@@ -74,6 +74,7 @@ + + #define RV3028_BACKUP_TCE BIT(5) + #define RV3028_BACKUP_TCR_MASK GENMASK(1,0) ++#define RV3028_BACKUP_BSM_MASK 0x0C + + #define OFFSET_STEP_PPT 953674 + +@@ -601,6 +602,7 @@ static int rv3028_probe(struct i2c_clien + struct rv3028_data *rv3028; + int ret, status; + u32 ohms; ++ u8 bsm; + struct nvmem_config nvmem_cfg = { + .name = "rv3028_nvram", + .word_size = 1, +@@ -671,6 +673,21 @@ static int rv3028_probe(struct i2c_clien + if (ret) + return ret; + ++ /* setup backup switchover mode */ ++ if (!device_property_read_u8(&client->dev, "backup-switchover-mode", ++ &bsm)) { ++ if (bsm <= 3) { ++ ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP, ++ RV3028_BACKUP_BSM_MASK, ++ (bsm & 0x03) << 2); ++ ++ if (ret) ++ return ret; ++ } else { ++ dev_warn(&client->dev, "invalid backup switchover mode value\n"); ++ } ++ } ++ + /* setup trickle charger */ + if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms", + &ohms)) { diff --git a/target/linux/brcm2708/patches-4.19/950-0382-bcm2835-mmc-Fix-DMA-channel-leak.patch b/target/linux/brcm2708/patches-4.19/950-0382-bcm2835-mmc-Fix-DMA-channel-leak.patch deleted file mode 100644 index 3c62a9d10c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0382-bcm2835-mmc-Fix-DMA-channel-leak.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 7458efc95816cc9d716d94a4894172c2a9d9fba7 Mon Sep 17 00:00:00 2001 -From: Lukas Wunner -Date: Wed, 16 Jan 2019 12:22:32 +0100 -Subject: [PATCH 382/806] bcm2835-mmc: Fix DMA channel leak - -The BCM2835 MMC host driver requests a DMA channel on probe but neglects -to release the channel in the probe error path and on driver unbind. - -I'm seeing this happen on every boot of the Compute Module 3: On first -driver probe, DMA channel 2 is allocated and then leaked with a "could -not get clk, deferring probe" message. On second driver probe, channel 4 -is allocated. - -Fix it. - -Signed-off-by: Lukas Wunner -Cc: Frank Pavlic ---- - drivers/mmc/host/bcm2835-mmc.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/mmc/host/bcm2835-mmc.c -+++ b/drivers/mmc/host/bcm2835-mmc.c -@@ -1503,6 +1503,8 @@ static int bcm2835_mmc_probe(struct plat - - return 0; - err: -+ if (host->dma_chan_rxtx) -+ dma_release_channel(host->dma_chan_rxtx); - mmc_free_host(mmc); - - return ret; -@@ -1548,6 +1550,9 @@ static int bcm2835_mmc_remove(struct pla - - tasklet_kill(&host->finish_tasklet); - -+ if (host->dma_chan_rxtx) -+ dma_release_channel(host->dma_chan_rxtx); -+ - mmc_free_host(host->mmc); - platform_set_drvdata(pdev, NULL); - diff --git a/target/linux/brcm2708/patches-4.19/950-0382-dt-bindings-rv3028-backup-switchover-support.patch b/target/linux/brcm2708/patches-4.19/950-0382-dt-bindings-rv3028-backup-switchover-support.patch new file mode 100644 index 0000000000..040bd60339 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0382-dt-bindings-rv3028-backup-switchover-support.patch @@ -0,0 +1,20 @@ +From 48598900ebd06f5880b01fcc60e240ea4a04858c Mon Sep 17 00:00:00 2001 +From: Phil Howard +Date: Fri, 29 Mar 2019 10:57:07 +0000 +Subject: [PATCH] dt-bindings: rv3028 backup switchover support + +Signed-off-by: Phil Howard +--- + Documentation/devicetree/bindings/rtc/rtc.txt | 1 + + 1 file changed, 1 insertion(+) + +--- a/Documentation/devicetree/bindings/rtc/rtc.txt ++++ b/Documentation/devicetree/bindings/rtc/rtc.txt +@@ -26,6 +26,7 @@ below. + - trickle-diode-disable : Do not use internal trickle charger diode Should be + given if internal trickle charger diode should be + disabled ++- backup-switchover-mode : Configure RTC backup power supply switch behaviour + - wakeup-source : Enables wake up of host system on alarm + - quartz-load-femtofarads : The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). diff --git a/target/linux/brcm2708/patches-4.19/950-0383-bcm2835-mmc-Fix-struct-mmc_host-leak-on-probe.patch b/target/linux/brcm2708/patches-4.19/950-0383-bcm2835-mmc-Fix-struct-mmc_host-leak-on-probe.patch deleted file mode 100644 index b54374dfcd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0383-bcm2835-mmc-Fix-struct-mmc_host-leak-on-probe.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 82ced13dc5805f6e49e2182269e672b20d8394bc Mon Sep 17 00:00:00 2001 -From: Lukas Wunner -Date: Sat, 19 Jan 2019 08:06:48 +0100 -Subject: [PATCH 383/806] bcm2835-mmc: Fix struct mmc_host leak on probe - -The BCM2835 MMC host driver requests the bus address of the host's -register map on probe. If that fails, the driver leaks the struct -mmc_host allocated earlier. - -Fix it. - -Signed-off-by: Lukas Wunner -Cc: Frank Pavlic ---- - drivers/mmc/host/bcm2835-mmc.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/mmc/host/bcm2835-mmc.c -+++ b/drivers/mmc/host/bcm2835-mmc.c -@@ -1439,7 +1439,8 @@ static int bcm2835_mmc_probe(struct plat - addr = of_get_address(node, 0, NULL, NULL); - if (!addr) { - dev_err(dev, "could not get DMA-register address\n"); -- return -ENODEV; -+ ret = -ENODEV; -+ goto err; - } - host->bus_addr = be32_to_cpup(addr); - pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", diff --git a/target/linux/brcm2708/patches-4.19/950-0383-overlays-Add-rv3028-backup-switchover-support-to-i2c.patch b/target/linux/brcm2708/patches-4.19/950-0383-overlays-Add-rv3028-backup-switchover-support-to-i2c.patch new file mode 100644 index 0000000000..769f2461a0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0383-overlays-Add-rv3028-backup-switchover-support-to-i2c.patch @@ -0,0 +1,34 @@ +From a2fdc7a590566d99d5261badeecb644664ff0fb3 Mon Sep 17 00:00:00 2001 +From: Phil Howard +Date: Fri, 29 Mar 2019 10:59:55 +0000 +Subject: [PATCH] overlays: Add rv3028 backup switchover support to + i2c-rtc + +Signed-off-by: Phil Howard +--- + arch/arm/boot/dts/overlays/README | 3 +++ + arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 1 + + 2 files changed, 4 insertions(+) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1013,6 +1013,9 @@ Params: abx80x Select o + wakeup-source Specify that the RTC can be used as a wakeup + source + ++ backup-switchover-mode Backup power supply switch mode. Must be 0 for ++ off or 1 for Vdd < VBackup (RV3028 only) ++ + + Name: i2c-rtc-gpio + Info: Adds support for a number of I2C Real Time Clock devices +--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +@@ -200,6 +200,7 @@ + trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", + <&abx80x>,"abracon,tc-resistor", + <&rv3028>,"trickle-resistor-ohms:0"; ++ backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; + wakeup-source = <&ds1339>,"wakeup-source?", + <&ds3231>,"wakeup-source?", + <&mcp7940x>,"wakeup-source?", diff --git a/target/linux/brcm2708/patches-4.19/950-0384-Maxim-MAX98357A-I2S-DAC-overlay-2935.patch b/target/linux/brcm2708/patches-4.19/950-0384-Maxim-MAX98357A-I2S-DAC-overlay-2935.patch new file mode 100644 index 0000000000..e149912edb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0384-Maxim-MAX98357A-I2S-DAC-overlay-2935.patch @@ -0,0 +1,130 @@ +From 5962d99b5efed4297ed5c1807d21b406ab86aef1 Mon Sep 17 00:00:00 2001 +From: wavelet2 <20504977+wavelet2@users.noreply.github.com> +Date: Mon, 15 Apr 2019 10:00:20 +0100 +Subject: [PATCH] Maxim MAX98357A I2S DAC overlay (#2935) + +Add overlay for Maxim MAX98357A I2S DAC. + +Signed-off-by: Richard Steedman +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 9 ++ + .../boot/dts/overlays/max98357a-overlay.dts | 84 +++++++++++++++++++ + 3 files changed, 94 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/max98357a-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -75,6 +75,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + justboom-dac.dtbo \ + justboom-digi.dtbo \ + ltc294x.dtbo \ ++ max98357a.dtbo \ + mbed-dac.dtbo \ + mcp23017.dtbo \ + mcp23s17.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1276,6 +1276,15 @@ Params: ltc2941 Select t + See the datasheet for more information. + + ++Name: max98357a ++Info: Configures the Maxim MAX98357A I2S DAC ++Load: dtoverlay=max98357a,= ++Params: no-sdmode Driver does not manage the state of the DAC's ++ SD_MODE pin (i.e. chip is always on). ++ sdmode-pin integer, GPIO pin connected to the SD_MODE input ++ of the DAC (default GPIO4 if parameter omitted). ++ ++ + Name: mbed-dac + Info: Configures the mbed AudioCODEC (TLV320AIC23B) + Load: dtoverlay=mbed-dac +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/max98357a-overlay.dts +@@ -0,0 +1,84 @@ ++// Overlay for Maxim MAX98357A audio DAC ++ ++// dtparams: ++// no-sdmode - SD_MODE pin not managed by driver. ++// sdmode-pin - Specify GPIO pin to which SD_MODE is connected (default 4). ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ /* Enable I2S */ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ /* DAC whose SD_MODE pin is managed by driver (via GPIO pin) */ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ max98357a_dac: max98357a { ++ compatible = "maxim,max98357a"; ++ #sound-dai-cells = <0>; ++ sdmode-gpios = <&gpio 4 0>; /* 2nd word overwritten by sdmode-pin parameter */ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ /* DAC whose SD_MODE pin is not managed by driver */ ++ fragment@2 { ++ target-path = "/"; ++ __dormant__ { ++ max98357a_nsd: max98357a { ++ compatible = "maxim,max98357a"; ++ #sound-dai-cells = <0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ /* Soundcard connecting I2S to DAC with SD_MODE */ ++ fragment@3 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "MAX98357A"; ++ status = "okay"; ++ simple-audio-card,cpu { ++ sound-dai = <&i2s>; ++ }; ++ simple-audio-card,codec { ++ sound-dai = <&max98357a_dac>; ++ }; ++ }; ++ }; ++ ++ /* Soundcard connecting I2S to DAC without SD_MODE */ ++ fragment@4 { ++ target = <&sound>; ++ __dormant__ { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "MAX98357A"; ++ status = "okay"; ++ simple-audio-card,cpu { ++ sound-dai = <&i2s>; ++ }; ++ simple-audio-card,codec { ++ sound-dai = <&max98357a_nsd>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ no-sdmode = <0>,"-1+2-3+4"; ++ sdmode-pin = <&max98357a_dac>,"sdmode-gpios:4"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0384-bcm2835-mmc-Fix-duplicate-free_irq-on-remove.patch b/target/linux/brcm2708/patches-4.19/950-0384-bcm2835-mmc-Fix-duplicate-free_irq-on-remove.patch deleted file mode 100644 index ecbffb4665..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0384-bcm2835-mmc-Fix-duplicate-free_irq-on-remove.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 4a15e086fa9531f808c15b8fb8d7ed1fdb411b74 Mon Sep 17 00:00:00 2001 -From: Lukas Wunner -Date: Sat, 19 Jan 2019 09:00:26 +0100 -Subject: [PATCH 384/806] bcm2835-mmc: Fix duplicate free_irq() on remove - -The BCM2835 MMC host driver requests its interrupt as a device-managed -resource, so the interrupt is automatically freed after the driver is -unbound. - -However on driver unbind, bcm2835_mmc_remove() frees the interrupt -explicitly to avoid invocation of the interrupt handler after driver -structures have been torn down. - -The interrupt is thus freed twice, leading to a WARN splat in -__free_irq(). Fix by not requesting the interrupt as a device-managed -resource. - -Signed-off-by: Lukas Wunner -Cc: Frank Pavlic ---- - drivers/mmc/host/bcm2835-mmc.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/mmc/host/bcm2835-mmc.c -+++ b/drivers/mmc/host/bcm2835-mmc.c -@@ -1389,9 +1389,9 @@ static int bcm2835_mmc_add_host(struct b - init_waitqueue_head(&host->buf_ready_int); - - bcm2835_mmc_init(host, 0); -- ret = devm_request_threaded_irq(dev, host->irq, bcm2835_mmc_irq, -- bcm2835_mmc_thread_irq, IRQF_SHARED, -- mmc_hostname(mmc), host); -+ ret = request_threaded_irq(host->irq, bcm2835_mmc_irq, -+ bcm2835_mmc_thread_irq, IRQF_SHARED, -+ mmc_hostname(mmc), host); - if (ret) { - dev_err(dev, "Failed to request IRQ %d: %d\n", host->irq, ret); - goto untasklet; diff --git a/target/linux/brcm2708/patches-4.19/950-0385-bcm2835-mmc-Handle-mmc_add_host-errors.patch b/target/linux/brcm2708/patches-4.19/950-0385-bcm2835-mmc-Handle-mmc_add_host-errors.patch deleted file mode 100644 index 2635cf2dc4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0385-bcm2835-mmc-Handle-mmc_add_host-errors.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 2e2f57e09e1ace18ae01a87d9fc4378c96c54370 Mon Sep 17 00:00:00 2001 -From: Lukas Wunner -Date: Tue, 22 Jan 2019 12:29:45 +0100 -Subject: [PATCH 385/806] bcm2835-mmc: Handle mmc_add_host() errors - -The BCM2835 MMC host driver calls mmc_add_host() but doesn't check its -return value. Errors occurring in that function are therefore not -handled. Fix it. - -Signed-off-by: Lukas Wunner -Cc: Frank Pavlic ---- - drivers/mmc/host/bcm2835-mmc.c | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) - ---- a/drivers/mmc/host/bcm2835-mmc.c -+++ b/drivers/mmc/host/bcm2835-mmc.c -@@ -1398,10 +1398,16 @@ static int bcm2835_mmc_add_host(struct b - } - - mmiowb(); -- mmc_add_host(mmc); -+ ret = mmc_add_host(mmc); -+ if (ret) { -+ dev_err(dev, "could not add MMC host\n"); -+ goto free_irq; -+ } - - return 0; - -+free_irq: -+ free_irq(host->irq, host); - untasklet: - tasklet_kill(&host->finish_tasklet); - diff --git a/target/linux/brcm2708/patches-4.19/950-0385-sound-Fixes-for-audioinjector-octo-under-4.19.patch b/target/linux/brcm2708/patches-4.19/950-0385-sound-Fixes-for-audioinjector-octo-under-4.19.patch new file mode 100644 index 0000000000..27c81bc123 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0385-sound-Fixes-for-audioinjector-octo-under-4.19.patch @@ -0,0 +1,108 @@ +From d003eff5bc4d19902867ad585292780a94746705 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 21 Mar 2019 11:19:46 +0000 +Subject: [PATCH] sound: Fixes for audioinjector-octo under 4.19 + +1. Move the DT alias declaration to the I2C shim in the cases +where the shim is enabled. This works around a problem caused by a +4.19 commit [1] that generates DT/OF uevents for I2C drivers. + +2. Fix the diagnostics in an error path of the soundcard driver to +correctly identify the reason for the failure to load. + +3. Move the declaration of the clock node in the overlay outside +the I2C node to avoid warnings. + +4. Sort the overlay nodes so that dependencies are only to earlier +fragments, in an attempt to get runtime dtoverlay application to +work (it still doesn't...) + +See: https://github.com/Audio-Injector/Octo/issues/14 +Signed-off-by: Phil Elwell + +[1] af503716ac14 ("i2c: core: report OF style module alias for devices registered via OF") +--- + .../overlays/audioinjector-addons-overlay.dts | 19 ++++++++++++------- + sound/soc/bcm/audioinjector-octo-soundcard.c | 2 +- + sound/soc/codecs/cs42xx8-i2c.c | 7 +++++++ + sound/soc/codecs/cs42xx8.c | 2 ++ + 4 files changed, 22 insertions(+), 8 deletions(-) + +--- a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts ++++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts +@@ -13,6 +13,17 @@ + }; + + fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ cs42448_mclk: codec-mclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <49152000>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { + target = <&i2c1>; + __overlay__ { + #address-cells = <1>; +@@ -27,16 +38,10 @@ + clock-names = "mclk"; + status = "okay"; + }; +- +- cs42448_mclk: codec-mclk { +- compatible = "fixed-clock"; +- #clock-cells = <0>; +- clock-frequency = <49152000>; +- }; + }; + }; + +- fragment@2 { ++ fragment@3 { + target = <&sound>; + snd: __overlay__ { + compatible = "ai,audioinjector-octo-soundcard"; +--- a/sound/soc/bcm/audioinjector-octo-soundcard.c ++++ b/sound/soc/bcm/audioinjector-octo-soundcard.c +@@ -297,7 +297,7 @@ static int audioinjector_octo_probe(stru + dai->codec_name = NULL; + dai->codec_of_node = codec_node; + } else +- if (!dai->cpu_of_node) { ++ if (!i2s_node) { + dev_err(&pdev->dev, + "i2s-controller missing or invalid in DT\n"); + return -EINVAL; +--- a/sound/soc/codecs/cs42xx8-i2c.c ++++ b/sound/soc/codecs/cs42xx8-i2c.c +@@ -45,6 +45,13 @@ static struct i2c_device_id cs42xx8_i2c_ + }; + MODULE_DEVICE_TABLE(i2c, cs42xx8_i2c_id); + ++const struct of_device_id cs42xx8_of_match[] = { ++ { .compatible = "cirrus,cs42448", .data = &cs42448_data, }, ++ { .compatible = "cirrus,cs42888", .data = &cs42888_data, }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, cs42xx8_of_match); ++ + static struct i2c_driver cs42xx8_i2c_driver = { + .driver = { + .name = "cs42xx8", +--- a/sound/soc/codecs/cs42xx8.c ++++ b/sound/soc/codecs/cs42xx8.c +@@ -436,8 +436,10 @@ const struct of_device_id cs42xx8_of_mat + { .compatible = "cirrus,cs42888", .data = &cs42888_data, }, + { /* sentinel */ } + }; ++#if !IS_ENABLED(CONFIG_SND_SOC_CS42XX8_I2C) + MODULE_DEVICE_TABLE(of, cs42xx8_of_match); + EXPORT_SYMBOL_GPL(cs42xx8_of_match); ++#endif + + int cs42xx8_probe(struct device *dev, struct regmap *regmap) + { diff --git a/target/linux/brcm2708/patches-4.19/950-0386-Revert-cgroup-Disable-cgroup-memory-by-default.patch b/target/linux/brcm2708/patches-4.19/950-0386-Revert-cgroup-Disable-cgroup-memory-by-default.patch new file mode 100644 index 0000000000..36d3ee1ac3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0386-Revert-cgroup-Disable-cgroup-memory-by-default.patch @@ -0,0 +1,63 @@ +From 49b6bb41655247c123cdc46dd49276a107c8b1d2 Mon Sep 17 00:00:00 2001 +From: P33M +Date: Wed, 24 Apr 2019 14:25:09 +0100 +Subject: [PATCH] Revert "cgroup: Disable cgroup "memory" by default" + +This reverts commit cd6ce4d0ded13c94ff5208c679ed5e030263149b. +--- + kernel/cgroup/cgroup.c | 30 ------------------------------ + 1 file changed, 30 deletions(-) + +--- a/kernel/cgroup/cgroup.c ++++ b/kernel/cgroup/cgroup.c +@@ -5334,8 +5334,6 @@ int __init cgroup_init_early(void) + } + + static u16 cgroup_disable_mask __initdata; +-static u16 cgroup_enable_mask __initdata; +-static int __init cgroup_disable(char *str); + + /** + * cgroup_init - cgroup initialization +@@ -5376,12 +5374,6 @@ int __init cgroup_init(void) + + mutex_unlock(&cgroup_mutex); + +- /* Apply an implicit disable... */ +- cgroup_disable("memory"); +- +- /* ...knowing that an explicit enable will override it. */ +- cgroup_disable_mask &= ~cgroup_enable_mask; +- + for_each_subsys(ss, ssid) { + if (ss->early_init) { + struct cgroup_subsys_state *css = +@@ -5773,28 +5765,6 @@ static int __init cgroup_disable(char *s + } + __setup("cgroup_disable=", cgroup_disable); + +-static int __init cgroup_enable(char *str) +-{ +- struct cgroup_subsys *ss; +- char *token; +- int i; +- +- while ((token = strsep(&str, ",")) != NULL) { +- if (!*token) +- continue; +- +- for_each_subsys(ss, i) { +- if (strcmp(token, ss->name) && +- strcmp(token, ss->legacy_name)) +- continue; +- +- cgroup_enable_mask |= 1 << i; +- } +- } +- return 1; +-} +-__setup("cgroup_enable=", cgroup_enable); +- + /** + * css_tryget_online_from_dir - get corresponding css from a cgroup dentry + * @dentry: directory dentry of interest diff --git a/target/linux/brcm2708/patches-4.19/950-0386-bcm2835-mmc-Deduplicate-reset-of-driver-data-on-remo.patch b/target/linux/brcm2708/patches-4.19/950-0386-bcm2835-mmc-Deduplicate-reset-of-driver-data-on-remo.patch deleted file mode 100644 index dfe2e81c2f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0386-bcm2835-mmc-Deduplicate-reset-of-driver-data-on-remo.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 3f6e190df3989e10a9baf591a7bf67d754842533 Mon Sep 17 00:00:00 2001 -From: Lukas Wunner -Date: Sat, 19 Jan 2019 08:42:40 +0100 -Subject: [PATCH 386/806] bcm2835-mmc: Deduplicate reset of driver data on - remove - -The BCM2835 MMC host driver sets the device's driver data pointer to -NULL on ->remove() even though the driver core subsequently does the -same in __device_release_driver(). Drop the duplicate assignment. - -Signed-off-by: Lukas Wunner -Cc: Frank Pavlic ---- - drivers/mmc/host/bcm2835-mmc.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/mmc/host/bcm2835-mmc.c -+++ b/drivers/mmc/host/bcm2835-mmc.c -@@ -1561,7 +1561,6 @@ static int bcm2835_mmc_remove(struct pla - dma_release_channel(host->dma_chan_rxtx); - - mmc_free_host(host->mmc); -- platform_set_drvdata(pdev, NULL); - - return 0; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0387-overlays-Add-PiGlow-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0387-overlays-Add-PiGlow-overlay.patch new file mode 100644 index 0000000000..4c3e76a512 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0387-overlays-Add-PiGlow-overlay.patch @@ -0,0 +1,147 @@ +From 615467f56356a2054d3a86854d391b7a2e0d5811 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Mon, 29 Apr 2019 19:35:33 +0200 +Subject: [PATCH] overlays: Add PiGlow overlay + +The PiGlow is a small add-on board for the Raspberry Pi that provides +18 individually controllable LEDs (SN3218) and uses the following pins: + +P1 & P17 (3V3) +P2 (5V) +P3 (SDA) +P5 (SCL) +P14 (GND) + +Signed-off-by: Stefan Wahren +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 ++ + arch/arm/boot/dts/overlays/piglow-overlay.dts | 97 +++++++++++++++++++ + 3 files changed, 104 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/piglow-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -97,6 +97,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + pi3-disable-wifi.dtbo \ + pi3-miniuart-bt.dtbo \ + pibell.dtbo \ ++ piglow.dtbo \ + piscreen.dtbo \ + piscreen2r.dtbo \ + pisound.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1532,6 +1532,12 @@ Params: alsaname Set the + "PiBell") + + ++Name: piglow ++Info: Configures the PiGlow by pimoroni.com ++Load: dtoverlay=piglow ++Params: ++ ++ + Name: piscreen + Info: PiScreen display by OzzMaker.com + Load: dtoverlay=piscreen,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/piglow-overlay.dts +@@ -0,0 +1,97 @@ ++// Definitions for SN3218 LED driver from Si-En Technology on PiGlow ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ sn3218@54 { ++ compatible = "si-en,sn3218"; ++ reg = <0x54>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ led@1 { ++ reg = <1>; ++ label = "piglow:red:led1"; ++ }; ++ led@2 { ++ reg = <2>; ++ label = "piglow:orange:led2"; ++ }; ++ led@3 { ++ reg = <3>; ++ label = "piglow:yellow:led3"; ++ }; ++ led@4 { ++ reg = <4>; ++ label = "piglow:green:led4"; ++ }; ++ led@5 { ++ reg = <5>; ++ label = "piglow:blue:led5"; ++ }; ++ led@6 { ++ reg = <6>; ++ label = "piglow:green:led6"; ++ }; ++ led@7 { ++ reg = <7>; ++ label = "piglow:red:led7"; ++ }; ++ led@8 { ++ reg = <8>; ++ label = "piglow:orange:led8"; ++ }; ++ led@9 { ++ reg = <9>; ++ label = "piglow:yellow:led9"; ++ }; ++ led@10 { ++ reg = <10>; ++ label = "piglow:white:led10"; ++ }; ++ led@11 { ++ reg = <11>; ++ label = "piglow:white:led11"; ++ }; ++ led@12 { ++ reg = <12>; ++ label = "piglow:blue:led12"; ++ }; ++ led@13 { ++ reg = <13>; ++ label = "piglow:white:led13"; ++ }; ++ led@14 { ++ reg = <14>; ++ label = "piglow:green:led14"; ++ }; ++ led@15 { ++ reg = <15>; ++ label = "piglow:blue:led15"; ++ }; ++ led@16 { ++ reg = <16>; ++ label = "piglow:yellow:led16"; ++ }; ++ led@17 { ++ reg = <17>; ++ label = "piglow:orange:led17"; ++ }; ++ led@18 { ++ reg = <18>; ++ label = "piglow:red:led18"; ++ }; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0388-Revert-bcm2835-interpolate-audio-delay.patch b/target/linux/brcm2708/patches-4.19/950-0388-Revert-bcm2835-interpolate-audio-delay.patch new file mode 100644 index 0000000000..9b4f6d741b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0388-Revert-bcm2835-interpolate-audio-delay.patch @@ -0,0 +1,71 @@ +From 83251570f16ec848694dac016cbdb55b1d28496d Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 29 Apr 2019 19:16:14 +0100 +Subject: [PATCH] Revert "bcm2835: interpolate audio delay" + +commit fb4b9f02986fcb5ae751106ef9b027806b5dd750 upstream. + +This reverts commit fb8cc99f05687ca5565dc53a7ee0dd86aefad952. +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 12 +----------- + .../staging/vc04_services/bcm2835-audio/bcm2835.h | 1 - + 2 files changed, 1 insertion(+), 12 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -11,7 +11,7 @@ + /* hardware definition */ + static const struct snd_pcm_hardware snd_bcm2835_playback_hw = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | +- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_BATCH), ++ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), + .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, + .rate_min = 8000, +@@ -81,8 +81,6 @@ void bcm2835_playback_fifo(struct bcm283 + alsa_stream->pos %= alsa_stream->buffer_size; + } + +- alsa_stream->interpolate_start = ktime_get_ns(); +- + if (alsa_stream->substream) { + if (new_period) + snd_pcm_period_elapsed(alsa_stream->substream); +@@ -308,7 +306,6 @@ static int snd_bcm2835_pcm_prepare(struc + alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); + alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); + alsa_stream->pos = 0; +- alsa_stream->interpolate_start = ktime_get_ns(); + + audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", + alsa_stream->buffer_size, alsa_stream->period_size, +@@ -400,19 +397,12 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s + { + struct snd_pcm_runtime *runtime = substream->runtime; + struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; +- u64 now = ktime_get_ns(); + + audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, + frames_to_bytes(runtime, runtime->status->hw_ptr), + frames_to_bytes(runtime, runtime->control->appl_ptr), + alsa_stream->pos); + +- /* Give userspace better delay reporting by interpolating between GPU +- * notifications, assuming audio speed is close enough to the clock +- * used for ktime */ +- if (alsa_stream->interpolate_start && alsa_stream->interpolate_start < now) +- runtime->delay = -(int)div_u64((now - alsa_stream->interpolate_start) * runtime->rate, 1000000000); +- + return snd_pcm_indirect_playback_pointer(substream, + &alsa_stream->pcm_indirect, + alsa_stream->pos); +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -133,7 +133,6 @@ struct bcm2835_alsa_stream { + unsigned int pos; + unsigned int buffer_size; + unsigned int period_size; +- u64 interpolate_start; + + atomic_t retrieved; + struct bcm2835_audio_instance *instance; diff --git a/target/linux/brcm2708/patches-4.19/950-0388-overlays-Add-max17040-support-to-i2c-sensor.patch b/target/linux/brcm2708/patches-4.19/950-0388-overlays-Add-max17040-support-to-i2c-sensor.patch deleted file mode 100644 index 385363a012..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0388-overlays-Add-max17040-support-to-i2c-sensor.patch +++ /dev/null @@ -1,56 +0,0 @@ -From fe6ccc8df700133615716df211f183c9c27d1e2e Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 25 Mar 2019 18:03:48 +0000 -Subject: [PATCH 388/806] overlays: Add max17040 support to i2c-sensor - -See: https://github.com/raspberrypi/linux/issues/2906 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 3 +++ - .../arm/boot/dts/overlays/i2c-sensor-overlay.dts | 16 ++++++++++++++++ - 2 files changed, 19 insertions(+) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1030,6 +1030,9 @@ Params: addr Set the - - lm75addr Deprecated - use addr parameter instead - -+ max17040 Select the Maxim Integrated MAX17040 battery -+ monitor -+ - sht3x Select the Sensiron SHT3x temperature and - humidity sensor. Valid addresses 0x44-0x45, - default 0x44 ---- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -@@ -201,6 +201,21 @@ - }; - }; - -+ fragment@13 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ max17040: max17040@36 { -+ compatible = "maxim,max17040"; -+ reg = <0x36>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ - __overrides__ { - addr = <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0", - <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0", -@@ -219,5 +234,6 @@ - veml6070 = <0>,"+10"; - sht3x = <0>,"+11"; - ds1621 = <0>,"+12"; -+ max17040 = <0>,"+13"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0389-Revert-staging-bcm2835-audio-Enable-compile-test.patch b/target/linux/brcm2708/patches-4.19/950-0389-Revert-staging-bcm2835-audio-Enable-compile-test.patch new file mode 100644 index 0000000000..841768b718 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0389-Revert-staging-bcm2835-audio-Enable-compile-test.patch @@ -0,0 +1,22 @@ +From e276e2d7b80259819e399eb3956ca92e5ddafbc3 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 29 Apr 2019 19:16:15 +0100 +Subject: [PATCH] Revert "staging: bcm2835-audio: Enable compile test" + +commit 4eae66777a262ac9707980ea0cfe902afadfb577 upstream. + +This reverts commit 02d205a57c4c943fc2a5b1ac7c912ce01944f700. +--- + drivers/staging/vc04_services/bcm2835-audio/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/Kconfig ++++ b/drivers/staging/vc04_services/bcm2835-audio/Kconfig +@@ -1,6 +1,6 @@ + config SND_BCM2835 + tristate "BCM2835 Audio" +- depends on (ARCH_BCM2835 || COMPILE_TEST) && SND ++ depends on ARCH_BCM2835 && SND + select SND_PCM + select BCM2835_VCHIQ + help diff --git a/target/linux/brcm2708/patches-4.19/950-0390-Revert-staging-bcm2835-audio-use-module_platform_dri.patch b/target/linux/brcm2708/patches-4.19/950-0390-Revert-staging-bcm2835-audio-use-module_platform_dri.patch new file mode 100644 index 0000000000..6a28d80b7e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0390-Revert-staging-bcm2835-audio-use-module_platform_dri.patch @@ -0,0 +1,42 @@ +From 576521feaa6a03f45839c28f1ce0588e4e49b0ca Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 29 Apr 2019 19:16:16 +0100 +Subject: [PATCH] Revert "staging: bcm2835-audio: use + module_platform_driver() macro" + +commit ed4c2e5dc4216d5dded502bfcf594d3984e6bccd upstream. + +This reverts commit 786ced30fec053b27248ed5b24dcde61ed3f47f6. +--- + .../vc04_services/bcm2835-audio/bcm2835.c | 20 ++++++++++++++++++- + 1 file changed, 19 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -470,7 +470,25 @@ static struct platform_driver bcm2835_al + .of_match_table = snd_bcm2835_of_match_table, + }, + }; +-module_platform_driver(bcm2835_alsa0_driver); ++ ++static int bcm2835_alsa_device_init(void) ++{ ++ int retval; ++ ++ retval = platform_driver_register(&bcm2835_alsa0_driver); ++ if (retval) ++ pr_err("Error registering bcm2835_audio driver %d .\n", retval); ++ ++ return retval; ++} ++ ++static void bcm2835_alsa_device_exit(void) ++{ ++ platform_driver_unregister(&bcm2835_alsa0_driver); ++} ++ ++late_initcall(bcm2835_alsa_device_init); ++module_exit(bcm2835_alsa_device_exit); + + MODULE_AUTHOR("Dom Cobley"); + MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); diff --git a/target/linux/brcm2708/patches-4.19/950-0390-media-bcm2835-unicam-Add-support-for-enum-framesizes.patch b/target/linux/brcm2708/patches-4.19/950-0390-media-bcm2835-unicam-Add-support-for-enum-framesizes.patch deleted file mode 100644 index 9d1e9469d3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0390-media-bcm2835-unicam-Add-support-for-enum-framesizes.patch +++ /dev/null @@ -1,133 +0,0 @@ -From 7c876909bc0a6d23124689d5fca89657a4fcb5a5 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 5 Mar 2019 15:43:27 +0000 -Subject: [PATCH 390/806] media: bcm2835-unicam: Add support for enum - framesizes and frameintervals - -vidioc_enum_framesizes and vidioc_enum_frameintervals weren't implemented, -therefore clients couldn't enumerate the supported resolutions. - -Implement them by forwarding on to the sensor driver. - -Signed-off-by: Dave Stevenson ---- - .../media/platform/bcm2835/bcm2835-unicam.c | 94 +++++++++++++++++++ - 1 file changed, 94 insertions(+) - ---- a/drivers/media/platform/bcm2835/bcm2835-unicam.c -+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c -@@ -1406,6 +1406,84 @@ static int unicam_g_edid(struct file *fi - return v4l2_subdev_call(dev->sensor, pad, get_edid, edid); - } - -+static int unicam_enum_framesizes(struct file *file, void *priv, -+ struct v4l2_frmsizeenum *fsize) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ const struct unicam_fmt *fmt; -+ struct v4l2_subdev_frame_size_enum fse; -+ int ret; -+ -+ /* check for valid format */ -+ fmt = find_format_by_pix(dev, fsize->pixel_format); -+ if (!fmt) { -+ unicam_dbg(3, dev, "Invalid pixel code: %x\n", -+ fsize->pixel_format); -+ return -EINVAL; -+ } -+ -+ fse.index = fsize->index; -+ fse.pad = 0; -+ fse.code = fmt->code; -+ -+ ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_size, NULL, &fse); -+ if (ret) -+ return ret; -+ -+ unicam_dbg(1, dev, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n", -+ __func__, fse.index, fse.code, fse.min_width, fse.max_width, -+ fse.min_height, fse.max_height); -+ -+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; -+ fsize->discrete.width = fse.max_width; -+ fsize->discrete.height = fse.max_height; -+ -+ return 0; -+} -+ -+static int unicam_enum_frameintervals(struct file *file, void *priv, -+ struct v4l2_frmivalenum *fival) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ const struct unicam_fmt *fmt; -+ struct v4l2_subdev_frame_interval_enum fie = { -+ .index = fival->index, -+ .width = fival->width, -+ .height = fival->height, -+ .which = V4L2_SUBDEV_FORMAT_ACTIVE, -+ }; -+ int ret; -+ -+ fmt = find_format_by_pix(dev, fival->pixel_format); -+ if (!fmt) -+ return -EINVAL; -+ -+ fie.code = fmt->code; -+ ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_interval, -+ NULL, &fie); -+ if (ret) -+ return ret; -+ -+ fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; -+ fival->discrete = fie.interval; -+ -+ return 0; -+} -+ -+static int unicam_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_g_parm_cap(video_devdata(file), dev->sensor, a); -+} -+ -+static int unicam_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a) -+{ -+ struct unicam_device *dev = video_drvdata(file); -+ -+ return v4l2_s_parm_cap(video_devdata(file), dev->sensor, a); -+} -+ - static int unicam_g_dv_timings(struct file *file, void *priv, - struct v4l2_dv_timings *timings) - { -@@ -1613,6 +1691,12 @@ static const struct v4l2_ioctl_ops unica - .vidioc_g_edid = unicam_g_edid, - .vidioc_s_edid = unicam_s_edid, - -+ .vidioc_enum_framesizes = unicam_enum_framesizes, -+ .vidioc_enum_frameintervals = unicam_enum_frameintervals, -+ -+ .vidioc_g_parm = unicam_g_parm, -+ .vidioc_s_parm = unicam_s_parm, -+ - .vidioc_s_dv_timings = unicam_s_dv_timings, - .vidioc_g_dv_timings = unicam_g_dv_timings, - .vidioc_query_dv_timings = unicam_query_dv_timings, -@@ -1850,6 +1934,16 @@ static int unicam_probe_complete(struct - v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUM_DV_TIMINGS); - v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERY_DV_TIMINGS); - } -+ if (!v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_interval)) -+ v4l2_disable_ioctl(&unicam->video_dev, -+ VIDIOC_ENUM_FRAMEINTERVALS); -+ if (!v4l2_subdev_has_op(unicam->sensor, video, g_frame_interval)) -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_PARM); -+ if (!v4l2_subdev_has_op(unicam->sensor, video, s_frame_interval)) -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_PARM); -+ -+ if (!v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_size)) -+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUM_FRAMESIZES); - - ret = v4l2_device_register_subdev_nodes(&unicam->v4l2_dev); - if (ret) { diff --git a/target/linux/brcm2708/patches-4.19/950-0391-staging-bcm2835-audio-Clean-up-mutex-locks.patch b/target/linux/brcm2708/patches-4.19/950-0391-staging-bcm2835-audio-Clean-up-mutex-locks.patch new file mode 100644 index 0000000000..531fe9e818 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0391-staging-bcm2835-audio-Clean-up-mutex-locks.patch @@ -0,0 +1,301 @@ +From 96588b9ccaddd69a832a07e2e3f2f3299e6d6c3a Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:30 +0200 +Subject: [PATCH] staging: bcm2835-audio: Clean up mutex locks + +commit ce4bb1aa271a97047b80ac917a5d91b54925913b upstream. + +snd-bcm2835 driver takes the lock with mutex_lock_interruptible() in +all places, which don't make sense. Replace them with the simple +mutex_lock(). + +Also taking a mutex lock right after creating it for each PCM object +is nonsense, too. It cannot be racy at that point. We can get rid of +it. + +Last but not least, initializing chip->audio_mutex at each place is +error-prone. Initialize properly at creating the chip object in +snd_bcm2835_create() instead. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 18 +++---- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 33 ++----------- + .../bcm2835-audio/bcm2835-vchiq.c | 47 ++++--------------- + .../vc04_services/bcm2835-audio/bcm2835.c | 1 + + 4 files changed, 20 insertions(+), 79 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c +@@ -77,8 +77,7 @@ static int snd_bcm2835_ctl_get(struct sn + { + struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); + +- if (mutex_lock_interruptible(&chip->audio_mutex)) +- return -EINTR; ++ mutex_lock(&chip->audio_mutex); + + BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK)); + +@@ -99,8 +98,7 @@ static int snd_bcm2835_ctl_put(struct sn + struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); + int changed = 0; + +- if (mutex_lock_interruptible(&chip->audio_mutex)) +- return -EINTR; ++ mutex_lock(&chip->audio_mutex); + + if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { + audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]); +@@ -187,8 +185,7 @@ static int snd_bcm2835_spdif_default_get + struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); + int i; + +- if (mutex_lock_interruptible(&chip->audio_mutex)) +- return -EINTR; ++ mutex_lock(&chip->audio_mutex); + + for (i = 0; i < 4; i++) + ucontrol->value.iec958.status[i] = +@@ -205,8 +202,7 @@ static int snd_bcm2835_spdif_default_put + unsigned int val = 0; + int i, change; + +- if (mutex_lock_interruptible(&chip->audio_mutex)) +- return -EINTR; ++ mutex_lock(&chip->audio_mutex); + + for (i = 0; i < 4; i++) + val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); +@@ -251,8 +247,7 @@ static int snd_bcm2835_spdif_stream_get( + struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); + int i; + +- if (mutex_lock_interruptible(&chip->audio_mutex)) +- return -EINTR; ++ mutex_lock(&chip->audio_mutex); + + for (i = 0; i < 4; i++) + ucontrol->value.iec958.status[i] = +@@ -269,8 +264,7 @@ static int snd_bcm2835_spdif_stream_put( + unsigned int val = 0; + int i, change; + +- if (mutex_lock_interruptible(&chip->audio_mutex)) +- return -EINTR; ++ mutex_lock(&chip->audio_mutex); + + for (i = 0; i < 4; i++) + val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -99,10 +99,7 @@ static int snd_bcm2835_playback_open_gen + int idx; + int err; + +- if (mutex_lock_interruptible(&chip->audio_mutex)) { +- audio_error("Interrupted whilst waiting for lock\n"); +- return -EINTR; +- } ++ mutex_lock(&chip->audio_mutex); + audio_info("Alsa open (%d)\n", substream->number); + idx = substream->number; + +@@ -194,10 +191,7 @@ static int snd_bcm2835_playback_close(st + struct bcm2835_alsa_stream *alsa_stream; + + chip = snd_pcm_substream_chip(substream); +- if (mutex_lock_interruptible(&chip->audio_mutex)) { +- audio_error("Interrupted whilst waiting for lock\n"); +- return -EINTR; +- } ++ mutex_lock(&chip->audio_mutex); + runtime = substream->runtime; + alsa_stream = runtime->private_data; + +@@ -274,8 +268,7 @@ static int snd_bcm2835_pcm_prepare(struc + int channels; + int err; + +- if (mutex_lock_interruptible(&chip->audio_mutex)) +- return -EINTR; ++ mutex_lock(&chip->audio_mutex); + + /* notify the vchiq that it should enter spdif passthrough mode by + * setting channels=0 (see +@@ -449,14 +442,9 @@ int snd_bcm2835_new_pcm(struct bcm2835_c + struct snd_pcm *pcm; + int err; + +- mutex_init(&chip->audio_mutex); +- if (mutex_lock_interruptible(&chip->audio_mutex)) { +- audio_error("Interrupted whilst waiting for lock\n"); +- return -EINTR; +- } + err = snd_pcm_new(chip->card, "bcm2835 ALSA", 0, numchannels, 0, &pcm); + if (err < 0) +- goto out; ++ return err; + pcm->private_data = chip; + strcpy(pcm->name, "bcm2835 ALSA"); + chip->pcm = pcm; +@@ -474,9 +462,6 @@ int snd_bcm2835_new_pcm(struct bcm2835_c + snd_bcm2835_playback_hw.buffer_bytes_max, + snd_bcm2835_playback_hw.buffer_bytes_max); + +-out: +- mutex_unlock(&chip->audio_mutex); +- + return 0; + } + +@@ -485,13 +470,9 @@ int snd_bcm2835_new_spdif_pcm(struct bcm + struct snd_pcm *pcm; + int err; + +- if (mutex_lock_interruptible(&chip->audio_mutex)) { +- audio_error("Interrupted whilst waiting for lock\n"); +- return -EINTR; +- } + err = snd_pcm_new(chip->card, "bcm2835 ALSA", 1, 1, 0, &pcm); + if (err < 0) +- goto out; ++ return err; + + pcm->private_data = chip; + strcpy(pcm->name, "bcm2835 IEC958/HDMI"); +@@ -504,8 +485,6 @@ int snd_bcm2835_new_spdif_pcm(struct bcm + snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, + snd_dma_continuous_data(GFP_KERNEL), + snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max); +-out: +- mutex_unlock(&chip->audio_mutex); + + return 0; + } +@@ -518,8 +497,6 @@ int snd_bcm2835_new_simple_pcm(struct bc + struct snd_pcm *pcm; + int err; + +- mutex_init(&chip->audio_mutex); +- + err = snd_pcm_new(chip->card, name, 0, numchannels, + 0, &pcm); + if (err) +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -319,11 +319,7 @@ static int vc_vchi_audio_deinit(struct b + } + + LOG_DBG(" .. about to lock (%d)\n", instance->num_connections); +- if (mutex_lock_interruptible(&instance->vchi_mutex)) { +- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", +- instance->num_connections); +- return -EINTR; +- } ++ mutex_lock(&instance->vchi_mutex); + + /* Close all VCHI service connections */ + for (i = 0; i < instance->num_connections; i++) { +@@ -434,11 +430,7 @@ int bcm2835_audio_open(struct bcm2835_al + instance = alsa_stream->instance; + LOG_DBG(" instance (%p)\n", instance); + +- if (mutex_lock_interruptible(&instance->vchi_mutex)) { +- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", instance->num_connections); +- ret = -EINTR; +- goto free_wq; +- } ++ mutex_lock(&instance->vchi_mutex); + vchi_service_use(instance->vchi_handle[0]); + + m.type = VC_AUDIO_MSG_TYPE_OPEN; +@@ -479,11 +471,7 @@ static int bcm2835_audio_set_ctls_chan(s + LOG_INFO(" Setting ALSA dest(%d), volume(%d)\n", + chip->dest, chip->volume); + +- if (mutex_lock_interruptible(&instance->vchi_mutex)) { +- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", +- instance->num_connections); +- return -EINTR; +- } ++ mutex_lock(&instance->vchi_mutex); + vchi_service_use(instance->vchi_handle[0]); + + instance->result = -1; +@@ -569,10 +557,7 @@ int bcm2835_audio_set_params(struct bcm2 + return -EINVAL; + } + +- if (mutex_lock_interruptible(&instance->vchi_mutex)) { +- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", instance->num_connections); +- return -EINTR; +- } ++ mutex_lock(&instance->vchi_mutex); + vchi_service_use(instance->vchi_handle[0]); + + instance->result = -1; +@@ -629,11 +614,7 @@ static int bcm2835_audio_start_worker(st + int status; + int ret; + +- if (mutex_lock_interruptible(&instance->vchi_mutex)) { +- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", +- instance->num_connections); +- return -EINTR; +- } ++ mutex_lock(&instance->vchi_mutex); + vchi_service_use(instance->vchi_handle[0]); + + m.type = VC_AUDIO_MSG_TYPE_START; +@@ -665,11 +646,7 @@ static int bcm2835_audio_stop_worker(str + int status; + int ret; + +- if (mutex_lock_interruptible(&instance->vchi_mutex)) { +- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", +- instance->num_connections); +- return -EINTR; +- } ++ mutex_lock(&instance->vchi_mutex); + vchi_service_use(instance->vchi_handle[0]); + + m.type = VC_AUDIO_MSG_TYPE_STOP; +@@ -704,11 +681,7 @@ int bcm2835_audio_close(struct bcm2835_a + + my_workqueue_quit(alsa_stream); + +- if (mutex_lock_interruptible(&instance->vchi_mutex)) { +- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", +- instance->num_connections); +- return -EINTR; +- } ++ mutex_lock(&instance->vchi_mutex); + vchi_service_use(instance->vchi_handle[0]); + + m.type = VC_AUDIO_MSG_TYPE_CLOSE; +@@ -761,11 +734,7 @@ static int bcm2835_audio_write_worker(st + + LOG_INFO(" Writing %d bytes from %p\n", count, src); + +- if (mutex_lock_interruptible(&instance->vchi_mutex)) { +- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", +- instance->num_connections); +- return -EINTR; +- } ++ mutex_lock(&instance->vchi_mutex); + vchi_service_use(instance->vchi_handle[0]); + + if (instance->peer_version == 0 && +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -149,6 +149,7 @@ static int snd_bcm2835_create(struct snd + return -ENOMEM; + + chip->card = card; ++ mutex_init(&chip->audio_mutex); + + chip->vchi_ctx = devres_find(card->dev->parent, + bcm2835_devm_free_vchi_ctx, NULL, NULL); diff --git a/target/linux/brcm2708/patches-4.19/950-0391-staging-bcm2835-codec-Refactor-default-resolution-co.patch b/target/linux/brcm2708/patches-4.19/950-0391-staging-bcm2835-codec-Refactor-default-resolution-co.patch deleted file mode 100644 index 65ddac97de..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0391-staging-bcm2835-codec-Refactor-default-resolution-co.patch +++ /dev/null @@ -1,154 +0,0 @@ -From a97baa799a8069fe965a4d194935c025e21acf8e Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 20 Mar 2019 10:06:51 +0000 -Subject: [PATCH 391/806] staging: bcm2835-codec: Refactor default resolution - code - -The default resolution code was different for each role -as compressed formats need to pass bytesperline as 0 and -set up customised buffer sizes. -This is common setup, therefore amend get_sizeimage and -get_bytesperline to do the correct thing whether compressed -or uncompressed. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 103 +++++++----------- - 1 file changed, 40 insertions(+), 63 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -578,10 +578,17 @@ static void job_abort(void *priv) - ctx->aborting = 1; - } - --static inline unsigned int get_sizeimage(int bpl, int height, -+static inline unsigned int get_sizeimage(int bpl, int width, int height, - struct bcm2835_codec_fmt *fmt) - { -- return (bpl * height * fmt->size_multiplier_x2) >> 1; -+ if (fmt->flags & V4L2_FMT_FLAG_COMPRESSED) { -+ if (width * height > 1280 * 720) -+ return DEF_COMP_BUF_SIZE_GREATER_720P; -+ else -+ return DEF_COMP_BUF_SIZE_720P_OR_LESS; -+ } else { -+ return (bpl * height * fmt->size_multiplier_x2) >> 1; -+ } - } - - static inline unsigned int get_bytesperline(int width, -@@ -1032,22 +1039,13 @@ static int vidioc_try_fmt(struct v4l2_fo - * some of the pixels are active. - */ - f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); -- -- f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, -- fmt); -- f->fmt.pix.sizeimage = get_sizeimage(f->fmt.pix.bytesperline, -- f->fmt.pix.height, -- fmt); -- } else { -- u32 min_size = f->fmt.pix.width > 1280 || -- f->fmt.pix.height > 720 ? -- DEF_COMP_BUF_SIZE_GREATER_720P : -- DEF_COMP_BUF_SIZE_720P_OR_LESS; -- -- f->fmt.pix.bytesperline = 0; -- if (f->fmt.pix.sizeimage < min_size) -- f->fmt.pix.sizeimage = min_size; - } -+ f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, -+ fmt); -+ f->fmt.pix.sizeimage = get_sizeimage(f->fmt.pix.bytesperline, -+ f->fmt.pix.width, -+ f->fmt.pix.height, -+ fmt); - - f->fmt.pix.field = V4L2_FIELD_NONE; - -@@ -1159,6 +1157,7 @@ static int vidioc_s_fmt(struct bcm2835_c - q_data_dst->bytesperline = - get_bytesperline(f->fmt.pix.width, q_data_dst->fmt); - q_data_dst->sizeimage = get_sizeimage(q_data_dst->bytesperline, -+ q_data_dst->crop_width, - q_data_dst->height, - q_data_dst->fmt); - update_capture_port = true; -@@ -2218,52 +2217,30 @@ static int bcm2835_codec_open(struct fil - - ctx->q_data[V4L2_M2M_SRC].fmt = get_default_format(dev, false); - ctx->q_data[V4L2_M2M_DST].fmt = get_default_format(dev, true); -- switch (dev->role) { -- case DECODE: -- /* -- * Input width and height are irrelevant as they will be defined -- * by the bitstream not the format. Required by V4L2 though. -- */ -- ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; -- ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; -- ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; -- ctx->q_data[V4L2_M2M_SRC].bytesperline = 0; -- ctx->q_data[V4L2_M2M_SRC].sizeimage = -- DEF_COMP_BUF_SIZE_720P_OR_LESS; -- -- ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; -- ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; -- ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; -- ctx->q_data[V4L2_M2M_DST].bytesperline = -- get_bytesperline(DEFAULT_WIDTH, -- ctx->q_data[V4L2_M2M_DST].fmt); -- ctx->q_data[V4L2_M2M_DST].sizeimage = -- get_sizeimage(ctx->q_data[V4L2_M2M_DST].bytesperline, -- ctx->q_data[V4L2_M2M_DST].height, -- ctx->q_data[V4L2_M2M_DST].fmt); -- break; -- case ENCODE: -- ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; -- ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; -- ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; -- ctx->q_data[V4L2_M2M_SRC].bytesperline = -- get_bytesperline(DEFAULT_WIDTH, -- ctx->q_data[V4L2_M2M_SRC].fmt); -- ctx->q_data[V4L2_M2M_SRC].sizeimage = -- get_sizeimage(ctx->q_data[V4L2_M2M_SRC].bytesperline, -- ctx->q_data[V4L2_M2M_SRC].height, -- ctx->q_data[V4L2_M2M_SRC].fmt); -- -- ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; -- ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; -- ctx->q_data[V4L2_M2M_DST].bytesperline = 0; -- ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; -- ctx->q_data[V4L2_M2M_DST].sizeimage = -- DEF_COMP_BUF_SIZE_720P_OR_LESS; -- break; -- case ISP: -- break; -- } -+ -+ ctx->q_data[V4L2_M2M_SRC].crop_width = DEFAULT_WIDTH; -+ ctx->q_data[V4L2_M2M_SRC].crop_height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_SRC].height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_SRC].bytesperline = -+ get_bytesperline(DEFAULT_WIDTH, -+ ctx->q_data[V4L2_M2M_SRC].fmt); -+ ctx->q_data[V4L2_M2M_SRC].sizeimage = -+ get_sizeimage(ctx->q_data[V4L2_M2M_SRC].bytesperline, -+ ctx->q_data[V4L2_M2M_SRC].crop_width, -+ ctx->q_data[V4L2_M2M_SRC].height, -+ ctx->q_data[V4L2_M2M_SRC].fmt); -+ -+ ctx->q_data[V4L2_M2M_DST].crop_width = DEFAULT_WIDTH; -+ ctx->q_data[V4L2_M2M_DST].crop_height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_DST].height = DEFAULT_HEIGHT; -+ ctx->q_data[V4L2_M2M_DST].bytesperline = -+ get_bytesperline(DEFAULT_WIDTH, -+ ctx->q_data[V4L2_M2M_DST].fmt); -+ ctx->q_data[V4L2_M2M_DST].sizeimage = -+ get_sizeimage(ctx->q_data[V4L2_M2M_DST].bytesperline, -+ ctx->q_data[V4L2_M2M_DST].crop_width, -+ ctx->q_data[V4L2_M2M_DST].height, -+ ctx->q_data[V4L2_M2M_DST].fmt); - - ctx->colorspace = V4L2_COLORSPACE_REC709; - ctx->bitrate = 10 * 1000 * 1000; diff --git a/target/linux/brcm2708/patches-4.19/950-0392-nvmem-add-type-attribute.patch b/target/linux/brcm2708/patches-4.19/950-0392-nvmem-add-type-attribute.patch deleted file mode 100644 index 7e343f4dc7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0392-nvmem-add-type-attribute.patch +++ /dev/null @@ -1,131 +0,0 @@ -From c9e76146066660a2884e61216c1ce227cf509bf8 Mon Sep 17 00:00:00 2001 -From: Alexandre Belloni -Date: Fri, 30 Nov 2018 11:53:20 +0000 -Subject: [PATCH 392/806] nvmem: add type attribute - -commit 16688453661b6d5159be558a1f8c1f54463a420f upstream. - -Add a type attribute so userspace is able to know how the data is stored as -this can help taking the correct decision when selecting which device to -use. This will also help program display the proper warnings when burning -fuses for example. - -Signed-off-by: Alexandre Belloni -Signed-off-by: Srinivas Kandagatla -Signed-off-by: Greg Kroah-Hartman ---- - drivers/nvmem/core.c | 21 +++++++++++++++++++++ - include/linux/nvmem-provider.h | 16 ++++++++++++++++ - 2 files changed, 37 insertions(+) - ---- a/drivers/nvmem/core.c -+++ b/drivers/nvmem/core.c -@@ -36,6 +36,7 @@ struct nvmem_device { - size_t size; - bool read_only; - int flags; -+ enum nvmem_type type; - struct bin_attribute eeprom; - struct device *base_dev; - nvmem_reg_read_t reg_read; -@@ -84,6 +85,21 @@ static int nvmem_reg_write(struct nvmem_ - return -EINVAL; - } - -+static ssize_t type_show(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct nvmem_device *nvmem = to_nvmem_device(dev); -+ -+ return sprintf(buf, "%s\n", nvmem_type_str[nvmem->type]); -+} -+ -+static DEVICE_ATTR_RO(type); -+ -+static struct attribute *nvmem_attrs[] = { -+ &dev_attr_type.attr, -+ NULL, -+}; -+ - static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t pos, size_t count) -@@ -169,6 +185,7 @@ static struct bin_attribute *nvmem_bin_r - - static const struct attribute_group nvmem_bin_rw_group = { - .bin_attrs = nvmem_bin_rw_attributes, -+ .attrs = nvmem_attrs, - }; - - static const struct attribute_group *nvmem_rw_dev_groups[] = { -@@ -192,6 +209,7 @@ static struct bin_attribute *nvmem_bin_r - - static const struct attribute_group nvmem_bin_ro_group = { - .bin_attrs = nvmem_bin_ro_attributes, -+ .attrs = nvmem_attrs, - }; - - static const struct attribute_group *nvmem_ro_dev_groups[] = { -@@ -216,6 +234,7 @@ static struct bin_attribute *nvmem_bin_r - - static const struct attribute_group nvmem_bin_rw_root_group = { - .bin_attrs = nvmem_bin_rw_root_attributes, -+ .attrs = nvmem_attrs, - }; - - static const struct attribute_group *nvmem_rw_root_dev_groups[] = { -@@ -239,6 +258,7 @@ static struct bin_attribute *nvmem_bin_r - - static const struct attribute_group nvmem_bin_ro_root_group = { - .bin_attrs = nvmem_bin_ro_root_attributes, -+ .attrs = nvmem_attrs, - }; - - static const struct attribute_group *nvmem_ro_root_dev_groups[] = { -@@ -485,6 +505,7 @@ struct nvmem_device *nvmem_register(cons - nvmem->dev.bus = &nvmem_bus_type; - nvmem->dev.parent = config->dev; - nvmem->priv = config->priv; -+ nvmem->type = config->type; - nvmem->reg_read = config->reg_read; - nvmem->reg_write = config->reg_write; - nvmem->dev.of_node = config->dev->of_node; ---- a/include/linux/nvmem-provider.h -+++ b/include/linux/nvmem-provider.h -@@ -22,6 +22,20 @@ typedef int (*nvmem_reg_read_t)(void *pr - typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset, - void *val, size_t bytes); - -+enum nvmem_type { -+ NVMEM_TYPE_UNKNOWN = 0, -+ NVMEM_TYPE_EEPROM, -+ NVMEM_TYPE_OTP, -+ NVMEM_TYPE_BATTERY_BACKED, -+}; -+ -+static const char * const nvmem_type_str[] = { -+ [NVMEM_TYPE_UNKNOWN] = "Unknown", -+ [NVMEM_TYPE_EEPROM] = "EEPROM", -+ [NVMEM_TYPE_OTP] = "OTP", -+ [NVMEM_TYPE_BATTERY_BACKED] = "Battery backed", -+}; -+ - /** - * struct nvmem_config - NVMEM device configuration - * -@@ -31,6 +45,7 @@ typedef int (*nvmem_reg_write_t)(void *p - * @owner: Pointer to exporter module. Used for refcounting. - * @cells: Optional array of pre-defined NVMEM cells. - * @ncells: Number of elements in cells. -+ * @type: Type of the nvmem storage - * @read_only: Device is read-only. - * @root_only: Device is accessibly to root only. - * @reg_read: Callback to read data. -@@ -54,6 +69,7 @@ struct nvmem_config { - struct module *owner; - const struct nvmem_cell_info *cells; - int ncells; -+ enum nvmem_type type; - bool read_only; - bool root_only; - nvmem_reg_read_t reg_read; diff --git a/target/linux/brcm2708/patches-4.19/950-0392-staging-bcm2835-audio-Remove-redundant-spdif-stream-.patch b/target/linux/brcm2708/patches-4.19/950-0392-staging-bcm2835-audio-Remove-redundant-spdif-stream-.patch new file mode 100644 index 0000000000..ac5c0a0d75 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0392-staging-bcm2835-audio-Remove-redundant-spdif-stream-.patch @@ -0,0 +1,89 @@ +From a1a77a925422be3f0c48002c2aa6c6d898a37f95 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:31 +0200 +Subject: [PATCH] staging: bcm2835-audio: Remove redundant spdif stream + ctls + +commit ab91e26229eaca2832df51e13c1285aea3be33ab upstream. + +The "IEC958 Playback Stream" control does basically the very same +thing as "IEC958 Playback Default" redundantly. The former should +have been stream-specific and restored after closing the stream, but +we don't do in that way. + +Since it's nothing but confusion, remove this fake. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 51 ------------------- + 1 file changed, 51 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c +@@ -233,48 +233,6 @@ static int snd_bcm2835_spdif_mask_get(st + return 0; + } + +-static int snd_bcm2835_spdif_stream_info(struct snd_kcontrol *kcontrol, +- struct snd_ctl_elem_info *uinfo) +-{ +- uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; +- uinfo->count = 1; +- return 0; +-} +- +-static int snd_bcm2835_spdif_stream_get(struct snd_kcontrol *kcontrol, +- struct snd_ctl_elem_value *ucontrol) +-{ +- struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); +- int i; +- +- mutex_lock(&chip->audio_mutex); +- +- for (i = 0; i < 4; i++) +- ucontrol->value.iec958.status[i] = +- (chip->spdif_status >> (i * 8)) & 0xff; +- +- mutex_unlock(&chip->audio_mutex); +- return 0; +-} +- +-static int snd_bcm2835_spdif_stream_put(struct snd_kcontrol *kcontrol, +- struct snd_ctl_elem_value *ucontrol) +-{ +- struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); +- unsigned int val = 0; +- int i, change; +- +- mutex_lock(&chip->audio_mutex); +- +- for (i = 0; i < 4; i++) +- val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); +- change = val != chip->spdif_status; +- chip->spdif_status = val; +- +- mutex_unlock(&chip->audio_mutex); +- return change; +-} +- + static struct snd_kcontrol_new snd_bcm2835_spdif[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, +@@ -290,15 +248,6 @@ static struct snd_kcontrol_new snd_bcm28 + .info = snd_bcm2835_spdif_mask_info, + .get = snd_bcm2835_spdif_mask_get, + }, +- { +- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | +- SNDRV_CTL_ELEM_ACCESS_INACTIVE, +- .iface = SNDRV_CTL_ELEM_IFACE_PCM, +- .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM), +- .info = snd_bcm2835_spdif_stream_info, +- .get = snd_bcm2835_spdif_stream_get, +- .put = snd_bcm2835_spdif_stream_put, +- }, + }; + + int snd_bcm2835_new_ctl(struct bcm2835_chip *chip) diff --git a/target/linux/brcm2708/patches-4.19/950-0393-rtc-rv3028-add-new-driver.patch b/target/linux/brcm2708/patches-4.19/950-0393-rtc-rv3028-add-new-driver.patch deleted file mode 100644 index 72392512b3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0393-rtc-rv3028-add-new-driver.patch +++ /dev/null @@ -1,860 +0,0 @@ -From bb0e317bfc453877805a12f975490ad38b6413f1 Mon Sep 17 00:00:00 2001 -From: Alexandre Belloni -Date: Wed, 13 Feb 2019 00:21:36 +0100 -Subject: [PATCH 393/806] rtc: rv3028: add new driver - -upstream commit e6e7376cfd7b3f9b63de3a22792f64d9bfb2ab53. - -Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock -Module that incorporates an integrated CMOS circuit together with an XTAL. -It has an i2c interface. - -The driver handles date/time, alarms, trickle charging, timestamping, -frequency offset correction, EEPROM and NVRAM. - -Signed-off-by: Alexandre Belloni ---- - Documentation/devicetree/bindings/rtc/rtc.txt | 69 ++ - drivers/rtc/Kconfig | 9 + - drivers/rtc/Makefile | 1 + - drivers/rtc/rtc-rv3028.c | 733 ++++++++++++++++++ - 4 files changed, 812 insertions(+) - create mode 100644 Documentation/devicetree/bindings/rtc/rtc.txt - create mode 100644 drivers/rtc/rtc-rv3028.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/rtc/rtc.txt -@@ -0,0 +1,69 @@ -+Generic device tree bindings for Real Time Clock devices -+======================================================== -+ -+This document describes generic bindings which can be used to describe Real Time -+Clock devices in a device tree. -+ -+Required properties -+------------------- -+ -+- compatible : name of RTC device following generic names recommended practice. -+ -+For other required properties e.g. to describe register sets, -+clocks, etc. check the binding documentation of the specific driver. -+ -+Optional properties -+------------------- -+ -+- start-year : if provided, the default hardware range supported by the RTC is -+ shifted so the first usable year is the specified one. -+ -+The following properties may not be supported by all drivers. However, if a -+driver wants to support one of the below features, it should adapt the bindings -+below. -+- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given -+ if trickle charger should be enabled -+- trickle-diode-disable : Do not use internal trickle charger diode Should be -+ given if internal trickle charger diode should be -+ disabled -+- wakeup-source : Enables wake up of host system on alarm -+- quartz-load-femtofarads : The capacitive load of the quartz(x-tal), -+ expressed in femto Farad (fF). -+ The default value shall be listed (if optional), -+ and likewise all valid values. -+ -+Trivial RTCs -+------------ -+ -+This is a list of trivial RTC devices that have simple device tree -+bindings, consisting only of a compatible field, an address and -+possibly an interrupt line. -+ -+ -+Compatible Vendor / Chip -+========== ============= -+abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface -+dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output -+dallas,ds1672 Dallas DS1672 Real-time Clock -+dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM -+epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -+epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -+emmicro,em3027 EM Microelectronic EM3027 Real-time Clock -+isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM -+isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM -+isil,isl12022 Intersil ISL12022 Real-time Clock -+microcrystal,rv3028 Real Time Clock Module with I2C-Bus -+microcrystal,rv3029 Real Time Clock Module with I2C-Bus -+microcrystal,rv8523 Real Time Clock -+nxp,pcf2127 Real-time clock -+nxp,pcf2129 Real-time clock -+nxp,pcf8563 Real-time clock/calendar -+pericom,pt7c4338 Real-time Clock Module -+ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -+ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -+ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -+ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -+ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -+ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -+sii,s35390a 2-wire CMOS real-time clock -+whwave,sd3078 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ---- a/drivers/rtc/Kconfig -+++ b/drivers/rtc/Kconfig -@@ -625,6 +625,15 @@ config RTC_DRV_EM3027 - This driver can also be built as a module. If so, the module - will be called rtc-em3027. - -+config RTC_DRV_RV3028 -+ tristate "Micro Crystal RV3028" -+ help -+ If you say yes here you get support for the Micro Crystal -+ RV3028. -+ -+ This driver can also be built as a module. If so, the module -+ will be called rtc-rv3028. -+ - config RTC_DRV_RV8803 - tristate "Micro Crystal RV8803, Epson RX8900" - help ---- a/drivers/rtc/Makefile -+++ b/drivers/rtc/Makefile -@@ -136,6 +136,7 @@ obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5 - obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o - obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o - obj-$(CONFIG_RTC_DRV_RTD119X) += rtc-rtd119x.o -+obj-$(CONFIG_RTC_DRV_RV3028) += rtc-rv3028.o - obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o - obj-$(CONFIG_RTC_DRV_RV8803) += rtc-rv8803.o - obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o ---- /dev/null -+++ b/drivers/rtc/rtc-rv3028.c -@@ -0,0 +1,733 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * RTC driver for the Micro Crystal RV3028 -+ * -+ * Copyright (C) 2019 Micro Crystal SA -+ * -+ * Alexandre Belloni -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "rtc-core.h" -+ -+#define RV3028_SEC 0x00 -+#define RV3028_MIN 0x01 -+#define RV3028_HOUR 0x02 -+#define RV3028_WDAY 0x03 -+#define RV3028_DAY 0x04 -+#define RV3028_MONTH 0x05 -+#define RV3028_YEAR 0x06 -+#define RV3028_ALARM_MIN 0x07 -+#define RV3028_ALARM_HOUR 0x08 -+#define RV3028_ALARM_DAY 0x09 -+#define RV3028_STATUS 0x0E -+#define RV3028_CTRL1 0x0F -+#define RV3028_CTRL2 0x10 -+#define RV3028_EVT_CTRL 0x13 -+#define RV3028_TS_COUNT 0x14 -+#define RV3028_TS_SEC 0x15 -+#define RV3028_RAM1 0x1F -+#define RV3028_EEPROM_ADDR 0x25 -+#define RV3028_EEPROM_DATA 0x26 -+#define RV3028_EEPROM_CMD 0x27 -+#define RV3028_CLKOUT 0x35 -+#define RV3028_OFFSET 0x36 -+#define RV3028_BACKUP 0x37 -+ -+#define RV3028_STATUS_PORF BIT(0) -+#define RV3028_STATUS_EVF BIT(1) -+#define RV3028_STATUS_AF BIT(2) -+#define RV3028_STATUS_TF BIT(3) -+#define RV3028_STATUS_UF BIT(4) -+#define RV3028_STATUS_BSF BIT(5) -+#define RV3028_STATUS_CLKF BIT(6) -+#define RV3028_STATUS_EEBUSY BIT(7) -+ -+#define RV3028_CTRL1_EERD BIT(3) -+#define RV3028_CTRL1_WADA BIT(5) -+ -+#define RV3028_CTRL2_RESET BIT(0) -+#define RV3028_CTRL2_12_24 BIT(1) -+#define RV3028_CTRL2_EIE BIT(2) -+#define RV3028_CTRL2_AIE BIT(3) -+#define RV3028_CTRL2_TIE BIT(4) -+#define RV3028_CTRL2_UIE BIT(5) -+#define RV3028_CTRL2_TSE BIT(7) -+ -+#define RV3028_EVT_CTRL_TSR BIT(2) -+ -+#define RV3028_EEPROM_CMD_WRITE 0x21 -+#define RV3028_EEPROM_CMD_READ 0x22 -+ -+#define RV3028_EEBUSY_POLL 10000 -+#define RV3028_EEBUSY_TIMEOUT 100000 -+ -+#define RV3028_BACKUP_TCE BIT(5) -+#define RV3028_BACKUP_TCR_MASK GENMASK(1,0) -+ -+#define OFFSET_STEP_PPT 953674 -+ -+enum rv3028_type { -+ rv_3028, -+}; -+ -+struct rv3028_data { -+ struct regmap *regmap; -+ struct rtc_device *rtc; -+ enum rv3028_type type; -+}; -+ -+static u16 rv3028_trickle_resistors[] = {1000, 3000, 6000, 11000}; -+ -+static ssize_t timestamp0_store(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent); -+ -+ regmap_update_bits(rv3028->regmap, RV3028_EVT_CTRL, RV3028_EVT_CTRL_TSR, -+ RV3028_EVT_CTRL_TSR); -+ -+ return count; -+}; -+ -+static ssize_t timestamp0_show(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent); -+ struct rtc_time tm; -+ int ret, count; -+ u8 date[6]; -+ -+ ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count); -+ if (ret) -+ return ret; -+ -+ if (!count) -+ return 0; -+ -+ ret = regmap_bulk_read(rv3028->regmap, RV3028_TS_SEC, date, -+ sizeof(date)); -+ if (ret) -+ return ret; -+ -+ tm.tm_sec = bcd2bin(date[0]); -+ tm.tm_min = bcd2bin(date[1]); -+ tm.tm_hour = bcd2bin(date[2]); -+ tm.tm_mday = bcd2bin(date[3]); -+ tm.tm_mon = bcd2bin(date[4]) - 1; -+ tm.tm_year = bcd2bin(date[5]) + 100; -+ -+ ret = rtc_valid_tm(&tm); -+ if (ret) -+ return ret; -+ -+ return sprintf(buf, "%llu\n", -+ (unsigned long long)rtc_tm_to_time64(&tm)); -+}; -+ -+static DEVICE_ATTR_RW(timestamp0); -+ -+static ssize_t timestamp0_count_show(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent); -+ int ret, count; -+ -+ ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count); -+ if (ret) -+ return ret; -+ -+ return sprintf(buf, "%u\n", count); -+}; -+ -+static DEVICE_ATTR_RO(timestamp0_count); -+ -+static struct attribute *rv3028_attrs[] = { -+ &dev_attr_timestamp0.attr, -+ &dev_attr_timestamp0_count.attr, -+ NULL -+}; -+ -+static const struct attribute_group rv3028_attr_group = { -+ .attrs = rv3028_attrs, -+}; -+ -+static irqreturn_t rv3028_handle_irq(int irq, void *dev_id) -+{ -+ struct rv3028_data *rv3028 = dev_id; -+ unsigned long events = 0; -+ u32 status = 0, ctrl = 0; -+ -+ if (regmap_read(rv3028->regmap, RV3028_STATUS, &status) < 0 || -+ status == 0) { -+ return IRQ_NONE; -+ } -+ -+ if (status & RV3028_STATUS_PORF) -+ dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n"); -+ -+ if (status & RV3028_STATUS_TF) { -+ status |= RV3028_STATUS_TF; -+ ctrl |= RV3028_CTRL2_TIE; -+ events |= RTC_PF; -+ } -+ -+ if (status & RV3028_STATUS_AF) { -+ status |= RV3028_STATUS_AF; -+ ctrl |= RV3028_CTRL2_AIE; -+ events |= RTC_AF; -+ } -+ -+ if (status & RV3028_STATUS_UF) { -+ status |= RV3028_STATUS_UF; -+ ctrl |= RV3028_CTRL2_UIE; -+ events |= RTC_UF; -+ } -+ -+ if (events) { -+ rtc_update_irq(rv3028->rtc, 1, events); -+ regmap_update_bits(rv3028->regmap, RV3028_STATUS, status, 0); -+ regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ctrl, 0); -+ } -+ -+ if (status & RV3028_STATUS_EVF) { -+ sysfs_notify(&rv3028->rtc->dev.kobj, NULL, -+ dev_attr_timestamp0.attr.name); -+ dev_warn(&rv3028->rtc->dev, "event detected"); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static int rv3028_get_time(struct device *dev, struct rtc_time *tm) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev); -+ u8 date[7]; -+ int ret, status; -+ -+ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); -+ if (ret < 0) -+ return ret; -+ -+ if (status & RV3028_STATUS_PORF) { -+ dev_warn(dev, "Voltage low, data is invalid.\n"); -+ return -EINVAL; -+ } -+ -+ ret = regmap_bulk_read(rv3028->regmap, RV3028_SEC, date, sizeof(date)); -+ if (ret) -+ return ret; -+ -+ tm->tm_sec = bcd2bin(date[RV3028_SEC] & 0x7f); -+ tm->tm_min = bcd2bin(date[RV3028_MIN] & 0x7f); -+ tm->tm_hour = bcd2bin(date[RV3028_HOUR] & 0x3f); -+ tm->tm_wday = ilog2(date[RV3028_WDAY] & 0x7f); -+ tm->tm_mday = bcd2bin(date[RV3028_DAY] & 0x3f); -+ tm->tm_mon = bcd2bin(date[RV3028_MONTH] & 0x1f) - 1; -+ tm->tm_year = bcd2bin(date[RV3028_YEAR]) + 100; -+ -+ return 0; -+} -+ -+static int rv3028_set_time(struct device *dev, struct rtc_time *tm) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev); -+ u8 date[7]; -+ int ret; -+ -+ date[RV3028_SEC] = bin2bcd(tm->tm_sec); -+ date[RV3028_MIN] = bin2bcd(tm->tm_min); -+ date[RV3028_HOUR] = bin2bcd(tm->tm_hour); -+ date[RV3028_WDAY] = 1 << (tm->tm_wday); -+ date[RV3028_DAY] = bin2bcd(tm->tm_mday); -+ date[RV3028_MONTH] = bin2bcd(tm->tm_mon + 1); -+ date[RV3028_YEAR] = bin2bcd(tm->tm_year - 100); -+ -+ /* -+ * Writing to the Seconds register has the same effect as setting RESET -+ * bit to 1 -+ */ -+ ret = regmap_bulk_write(rv3028->regmap, RV3028_SEC, date, -+ sizeof(date)); -+ if (ret) -+ return ret; -+ -+ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, -+ RV3028_STATUS_PORF, 0); -+ -+ return ret; -+} -+ -+static int rv3028_get_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev); -+ u8 alarmvals[3]; -+ int status, ctrl, ret; -+ -+ ret = regmap_bulk_read(rv3028->regmap, RV3028_ALARM_MIN, alarmvals, -+ sizeof(alarmvals)); -+ if (ret) -+ return ret; -+ -+ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); -+ if (ret < 0) -+ return ret; -+ -+ ret = regmap_read(rv3028->regmap, RV3028_CTRL2, &ctrl); -+ if (ret < 0) -+ return ret; -+ -+ alrm->time.tm_sec = 0; -+ alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f); -+ alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f); -+ alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f); -+ -+ alrm->enabled = !!(ctrl & RV3028_CTRL2_AIE); -+ alrm->pending = (status & RV3028_STATUS_AF) && alrm->enabled; -+ -+ return 0; -+} -+ -+static int rv3028_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev); -+ u8 alarmvals[3]; -+ u8 ctrl = 0; -+ int ret; -+ -+ /* The alarm has no seconds, round up to nearest minute */ -+ if (alrm->time.tm_sec) { -+ time64_t alarm_time = rtc_tm_to_time64(&alrm->time); -+ -+ alarm_time += 60 - alrm->time.tm_sec; -+ rtc_time64_to_tm(alarm_time, &alrm->time); -+ } -+ -+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, -+ RV3028_CTRL2_AIE | RV3028_CTRL2_UIE, 0); -+ if (ret) -+ return ret; -+ -+ alarmvals[0] = bin2bcd(alrm->time.tm_min); -+ alarmvals[1] = bin2bcd(alrm->time.tm_hour); -+ alarmvals[2] = bin2bcd(alrm->time.tm_mday); -+ -+ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, -+ RV3028_STATUS_AF, 0); -+ if (ret) -+ return ret; -+ -+ ret = regmap_bulk_write(rv3028->regmap, RV3028_ALARM_MIN, alarmvals, -+ sizeof(alarmvals)); -+ if (ret) -+ return ret; -+ -+ if (alrm->enabled) { -+ if (rv3028->rtc->uie_rtctimer.enabled) -+ ctrl |= RV3028_CTRL2_UIE; -+ if (rv3028->rtc->aie_timer.enabled) -+ ctrl |= RV3028_CTRL2_AIE; -+ } -+ -+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, -+ RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl); -+ -+ return ret; -+} -+ -+static int rv3028_alarm_irq_enable(struct device *dev, unsigned int enabled) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev); -+ int ctrl = 0, ret; -+ -+ if (enabled) { -+ if (rv3028->rtc->uie_rtctimer.enabled) -+ ctrl |= RV3028_CTRL2_UIE; -+ if (rv3028->rtc->aie_timer.enabled) -+ ctrl |= RV3028_CTRL2_AIE; -+ } -+ -+ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, -+ RV3028_STATUS_AF | RV3028_STATUS_UF, 0); -+ if (ret) -+ return ret; -+ -+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, -+ RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ -+static int rv3028_read_offset(struct device *dev, long *offset) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev); -+ int ret, value, steps; -+ -+ ret = regmap_read(rv3028->regmap, RV3028_OFFSET, &value); -+ if (ret < 0) -+ return ret; -+ -+ steps = sign_extend32(value << 1, 8); -+ -+ ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &value); -+ if (ret < 0) -+ return ret; -+ -+ steps += value >> 7; -+ -+ *offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000); -+ -+ return 0; -+} -+ -+static int rv3028_set_offset(struct device *dev, long offset) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev); -+ int ret; -+ -+ offset = clamp(offset, -244141L, 243187L) * 1000; -+ offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT); -+ -+ ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1); -+ if (ret < 0) -+ return ret; -+ -+ return regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7), -+ offset << 7); -+} -+ -+static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) -+{ -+ struct rv3028_data *rv3028 = dev_get_drvdata(dev); -+ int status, ret = 0; -+ -+ switch (cmd) { -+ case RTC_VL_READ: -+ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); -+ if (ret < 0) -+ return ret; -+ -+ if (status & RV3028_STATUS_PORF) -+ dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n"); -+ -+ status &= RV3028_STATUS_PORF; -+ -+ if (copy_to_user((void __user *)arg, &status, sizeof(int))) -+ return -EFAULT; -+ -+ return 0; -+ -+ case RTC_VL_CLR: -+ ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, -+ RV3028_STATUS_PORF, 0); -+ -+ return ret; -+ -+ default: -+ return -ENOIOCTLCMD; -+ } -+} -+ -+static int rv3028_nvram_write(void *priv, unsigned int offset, void *val, -+ size_t bytes) -+{ -+ return regmap_bulk_write(priv, RV3028_RAM1 + offset, val, bytes); -+} -+ -+static int rv3028_nvram_read(void *priv, unsigned int offset, void *val, -+ size_t bytes) -+{ -+ return regmap_bulk_read(priv, RV3028_RAM1 + offset, val, bytes); -+} -+ -+static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val, -+ size_t bytes) -+{ -+ u32 status, ctrl1; -+ int i, ret, err; -+ u8 *buf = val; -+ -+ ret = regmap_read(priv, RV3028_CTRL1, &ctrl1); -+ if (ret) -+ return ret; -+ -+ if (!(ctrl1 & RV3028_CTRL1_EERD)) { -+ ret = regmap_update_bits(priv, RV3028_CTRL1, -+ RV3028_CTRL1_EERD, RV3028_CTRL1_EERD); -+ if (ret) -+ return ret; -+ -+ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status, -+ !(status & RV3028_STATUS_EEBUSY), -+ RV3028_EEBUSY_POLL, -+ RV3028_EEBUSY_TIMEOUT); -+ if (ret) -+ goto restore_eerd; -+ } -+ -+ for (i = 0; i < bytes; i++) { -+ ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i); -+ if (ret) -+ goto restore_eerd; -+ -+ ret = regmap_write(priv, RV3028_EEPROM_DATA, buf[i]); -+ if (ret) -+ goto restore_eerd; -+ -+ ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0); -+ if (ret) -+ goto restore_eerd; -+ -+ ret = regmap_write(priv, RV3028_EEPROM_CMD, -+ RV3028_EEPROM_CMD_WRITE); -+ if (ret) -+ goto restore_eerd; -+ -+ usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT); -+ -+ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status, -+ !(status & RV3028_STATUS_EEBUSY), -+ RV3028_EEBUSY_POLL, -+ RV3028_EEBUSY_TIMEOUT); -+ if (ret) -+ goto restore_eerd; -+ } -+ -+restore_eerd: -+ if (!(ctrl1 & RV3028_CTRL1_EERD)) -+ { -+ err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD, -+ 0); -+ if (err && !ret) -+ ret = err; -+ } -+ -+ return ret; -+} -+ -+static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val, -+ size_t bytes) -+{ -+ u32 status, ctrl1, data; -+ int i, ret, err; -+ u8 *buf = val; -+ -+ ret = regmap_read(priv, RV3028_CTRL1, &ctrl1); -+ if (ret) -+ return ret; -+ -+ if (!(ctrl1 & RV3028_CTRL1_EERD)) { -+ ret = regmap_update_bits(priv, RV3028_CTRL1, -+ RV3028_CTRL1_EERD, RV3028_CTRL1_EERD); -+ if (ret) -+ return ret; -+ -+ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status, -+ !(status & RV3028_STATUS_EEBUSY), -+ RV3028_EEBUSY_POLL, -+ RV3028_EEBUSY_TIMEOUT); -+ if (ret) -+ goto restore_eerd; -+ } -+ -+ for (i = 0; i < bytes; i++) { -+ ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i); -+ if (ret) -+ goto restore_eerd; -+ -+ ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0); -+ if (ret) -+ goto restore_eerd; -+ -+ ret = regmap_write(priv, RV3028_EEPROM_CMD, -+ RV3028_EEPROM_CMD_READ); -+ if (ret) -+ goto restore_eerd; -+ -+ ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status, -+ !(status & RV3028_STATUS_EEBUSY), -+ RV3028_EEBUSY_POLL, -+ RV3028_EEBUSY_TIMEOUT); -+ if (ret) -+ goto restore_eerd; -+ -+ ret = regmap_read(priv, RV3028_EEPROM_DATA, &data); -+ if (ret) -+ goto restore_eerd; -+ buf[i] = data; -+ } -+ -+restore_eerd: -+ if (!(ctrl1 & RV3028_CTRL1_EERD)) -+ { -+ err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD, -+ 0); -+ if (err && !ret) -+ ret = err; -+ } -+ -+ return ret; -+} -+ -+static struct rtc_class_ops rv3028_rtc_ops = { -+ .read_time = rv3028_get_time, -+ .set_time = rv3028_set_time, -+ .read_offset = rv3028_read_offset, -+ .set_offset = rv3028_set_offset, -+ .ioctl = rv3028_ioctl, -+}; -+ -+static const struct regmap_config regmap_config = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .max_register = 0x37, -+}; -+ -+static int rv3028_probe(struct i2c_client *client) -+{ -+ struct rv3028_data *rv3028; -+ int ret, status; -+ u32 ohms; -+ struct nvmem_config nvmem_cfg = { -+ .name = "rv3028_nvram", -+ .word_size = 1, -+ .stride = 1, -+ .size = 2, -+ .type = NVMEM_TYPE_BATTERY_BACKED, -+ .reg_read = rv3028_nvram_read, -+ .reg_write = rv3028_nvram_write, -+ }; -+ struct nvmem_config eeprom_cfg = { -+ .name = "rv3028_eeprom", -+ .word_size = 1, -+ .stride = 1, -+ .size = 43, -+ .type = NVMEM_TYPE_EEPROM, -+ .reg_read = rv3028_eeprom_read, -+ .reg_write = rv3028_eeprom_write, -+ }; -+ -+ rv3028 = devm_kzalloc(&client->dev, sizeof(struct rv3028_data), -+ GFP_KERNEL); -+ if (!rv3028) -+ return -ENOMEM; -+ -+ rv3028->regmap = devm_regmap_init_i2c(client, ®map_config); -+ -+ i2c_set_clientdata(client, rv3028); -+ -+ ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); -+ if (ret < 0) -+ return ret; -+ -+ if (status & RV3028_STATUS_PORF) -+ dev_warn(&client->dev, "Voltage low, data loss detected.\n"); -+ -+ if (status & RV3028_STATUS_AF) -+ dev_warn(&client->dev, "An alarm may have been missed.\n"); -+ -+ rv3028->rtc = devm_rtc_allocate_device(&client->dev); -+ if (IS_ERR(rv3028->rtc)) { -+ return PTR_ERR(rv3028->rtc); -+ } -+ -+ if (client->irq > 0) { -+ ret = devm_request_threaded_irq(&client->dev, client->irq, -+ NULL, rv3028_handle_irq, -+ IRQF_TRIGGER_LOW | IRQF_ONESHOT, -+ "rv3028", rv3028); -+ if (ret) { -+ dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n"); -+ client->irq = 0; -+ } else { -+ rv3028_rtc_ops.read_alarm = rv3028_get_alarm; -+ rv3028_rtc_ops.set_alarm = rv3028_set_alarm; -+ rv3028_rtc_ops.alarm_irq_enable = rv3028_alarm_irq_enable; -+ } -+ } -+ -+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1, -+ RV3028_CTRL1_WADA, RV3028_CTRL1_WADA); -+ if (ret) -+ return ret; -+ -+ /* setup timestamping */ -+ ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, -+ RV3028_CTRL2_EIE | RV3028_CTRL2_TSE, -+ RV3028_CTRL2_EIE | RV3028_CTRL2_TSE); -+ if (ret) -+ return ret; -+ -+ /* setup trickle charger */ -+ if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms", -+ &ohms)) { -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(rv3028_trickle_resistors); i++) -+ if (ohms == rv3028_trickle_resistors[i]) -+ break; -+ -+ if (i < ARRAY_SIZE(rv3028_trickle_resistors)) { -+ ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP, -+ RV3028_BACKUP_TCE | -+ RV3028_BACKUP_TCR_MASK, -+ RV3028_BACKUP_TCE | i); -+ if (ret) -+ return ret; -+ } else { -+ dev_warn(&client->dev, "invalid trickle resistor value\n"); -+ } -+ } -+ -+ ret = rtc_add_group(rv3028->rtc, &rv3028_attr_group); -+ if (ret) -+ return ret; -+ -+ rv3028->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; -+ rv3028->rtc->range_max = RTC_TIMESTAMP_END_2099; -+ rv3028->rtc->ops = &rv3028_rtc_ops; -+ ret = rtc_register_device(rv3028->rtc); -+ if (ret) -+ return ret; -+ -+ nvmem_cfg.priv = rv3028->regmap; -+ rtc_nvmem_register(rv3028->rtc, &nvmem_cfg); -+ eeprom_cfg.priv = rv3028->regmap; -+ rtc_nvmem_register(rv3028->rtc, &eeprom_cfg); -+ -+ rv3028->rtc->max_user_freq = 1; -+ -+ return 0; -+} -+ -+static const struct of_device_id rv3028_of_match[] = { -+ { .compatible = "microcrystal,rv3028", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, rv3028_of_match); -+ -+static struct i2c_driver rv3028_driver = { -+ .driver = { -+ .name = "rtc-rv3028", -+ .of_match_table = of_match_ptr(rv3028_of_match), -+ }, -+ .probe_new = rv3028_probe, -+}; -+module_i2c_driver(rv3028_driver); -+ -+MODULE_AUTHOR("Alexandre Belloni "); -+MODULE_DESCRIPTION("Micro Crystal RV3028 RTC driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.19/950-0393-staging-bcm2835-audio-Clean-up-include-files-in-bcm2.patch b/target/linux/brcm2708/patches-4.19/950-0393-staging-bcm2835-audio-Clean-up-include-files-in-bcm2.patch new file mode 100644 index 0000000000..e1cf501f37 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0393-staging-bcm2835-audio-Clean-up-include-files-in-bcm2.patch @@ -0,0 +1,43 @@ +From 8eb8e04a27188f6abc22d09b4a1fffbec10d45f4 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:32 +0200 +Subject: [PATCH] staging: bcm2835-audio: Clean up include files in + bcm2835-ctl.c + +commit 821950d3da4bf97bcfedcb812176a0f26b833db0 upstream. + +Only a few of them are really needed. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 15 --------------- + 1 file changed, 15 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c +@@ -1,23 +1,8 @@ + // SPDX-License-Identifier: GPL-2.0 + /* Copyright 2011 Broadcom Corporation. All rights reserved. */ + +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +- + #include + #include +-#include +-#include +-#include +-#include + #include + #include + diff --git a/target/linux/brcm2708/patches-4.19/950-0394-staging-bcm2835-audio-Remove-redundant-substream-mas.patch b/target/linux/brcm2708/patches-4.19/950-0394-staging-bcm2835-audio-Remove-redundant-substream-mas.patch new file mode 100644 index 0000000000..b2af97443c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0394-staging-bcm2835-audio-Remove-redundant-substream-mas.patch @@ -0,0 +1,111 @@ +From 1120b4699738a3ee748314c433a96e45182a3411 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:33 +0200 +Subject: [PATCH] staging: bcm2835-audio: Remove redundant substream + mask checks + +commit 14b1f4cba853a11c7b381ad919622f38eb194bd7 upstream. + +The avail_substreams bit mask is checked for the possible racy +accesses, but this cannot happen in practice; i.e. the assignment and +the check are superfluous. + +Let's rip them off. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 2 -- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 8 -------- + .../vc04_services/bcm2835-audio/bcm2835-vchiq.c | 17 +++++++---------- + .../vc04_services/bcm2835-audio/bcm2835.c | 5 +---- + .../vc04_services/bcm2835-audio/bcm2835.h | 2 -- + 5 files changed, 8 insertions(+), 26 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c +@@ -64,8 +64,6 @@ static int snd_bcm2835_ctl_get(struct sn + + mutex_lock(&chip->audio_mutex); + +- BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK)); +- + if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) + ucontrol->value.integer.value[0] = chip2alsa(chip->volume); + else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -118,14 +118,6 @@ static int snd_bcm2835_playback_open_gen + goto out; + } + +- /* Check if we are ready */ +- if (!(chip->avail_substreams & (1 << idx))) { +- /* We are not ready yet */ +- audio_error("substream(%d) device is not ready yet\n", idx); +- err = -EAGAIN; +- goto out; +- } +- + alsa_stream = kzalloc(sizeof(*alsa_stream), GFP_KERNEL); + if (!alsa_stream) { + err = -ENOMEM; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -523,16 +523,13 @@ int bcm2835_audio_set_ctls(struct bcm283 + + /* change ctls for all substreams */ + for (i = 0; i < MAX_SUBSTREAMS; i++) { +- if (chip->avail_substreams & (1 << i)) { +- if (!chip->alsa_stream[i]) { +- LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams); +- ret = 0; +- } else if (bcm2835_audio_set_ctls_chan(chip->alsa_stream[i], chip) != 0) { +- LOG_ERR("Couldn't set the controls for stream %d\n", i); +- ret = -1; +- } else { +- LOG_DBG(" Controls set for stream %d\n", i); +- } ++ if (!chip->alsa_stream[i]) ++ continue; ++ if (bcm2835_audio_set_ctls_chan(chip->alsa_stream[i], chip) != 0) { ++ LOG_ERR("Couldn't set the controls for stream %d\n", i); ++ ret = -1; ++ } else { ++ LOG_DBG(" Controls set for stream %d\n", i); + } + } + return ret; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -280,7 +280,7 @@ static int snd_add_child_device(struct d + struct snd_card *card; + struct device *child; + struct bcm2835_chip *chip; +- int err, i; ++ int err; + + child = snd_create_device(device, &audio_driver->driver, + audio_driver->driver.name); +@@ -325,9 +325,6 @@ static int snd_add_child_device(struct d + return err; + } + +- for (i = 0; i < numchans; i++) +- chip->avail_substreams |= (1 << i); +- + err = snd_card_register(card); + if (err) { + dev_err(child, "Failed to register card, error %d\n", err); +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -98,8 +98,6 @@ struct bcm2835_chip { + struct snd_card *card; + struct snd_pcm *pcm; + struct snd_pcm *pcm_spdif; +- /* Bitmat for valid reg_base and irq numbers */ +- unsigned int avail_substreams; + struct device *dev; + struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS]; + diff --git a/target/linux/brcm2708/patches-4.19/950-0395-overlays-Add-rv3028-to-i2c-rtc.patch b/target/linux/brcm2708/patches-4.19/950-0395-overlays-Add-rv3028-to-i2c-rtc.patch deleted file mode 100644 index de637b3b27..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0395-overlays-Add-rv3028-to-i2c-rtc.patch +++ /dev/null @@ -1,75 +0,0 @@ -From 67dd8e4c8ccf5d331960c7e936e5b03a9f92496d Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 28 Mar 2019 13:26:59 +0000 -Subject: [PATCH 395/806] overlays: Add rv3028 to i2c-rtc - -See: https://github.com/raspberrypi/linux/issues/2912 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 4 +++- - .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 19 ++++++++++++++++++- - 2 files changed, 21 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -939,6 +939,8 @@ Params: abx80x Select o - - pcf8563 Select the PCF8563 device - -+ rv3028 Select the Micro Crystal RV3028 device -+ - addr Sets the address for the RTC. Note that the - device must be configured to use the specified - address. -@@ -947,7 +949,7 @@ Params: abx80x Select o - "schottky" (ABx80x only) - - trickle-resistor-ohms Resistor value for trickle charge (DS1339, -- ABx80x) -+ ABx80x, RV3028) - - wakeup-source Specify that the RTC can be used as a wakeup - source ---- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -@@ -158,6 +158,21 @@ - }; - }; - -+ fragment@10 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ rv3028: rv3028@52 { -+ compatible = "microcrystal,rv3028"; -+ reg = <0x52>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ - __overrides__ { - abx80x = <0>,"+0"; - ds1307 = <0>,"+1"; -@@ -169,6 +184,7 @@ - pcf8523 = <0>,"+7"; - pcf8563 = <0>,"+8"; - m41t62 = <0>,"+9"; -+ rv3028 = <0>,"+10"; - - addr = <&abx80x>, "reg:0", - <&ds1307>, "reg:0", -@@ -182,7 +198,8 @@ - <&m41t62>, "reg:0"; - trickle-diode-type = <&abx80x>,"abracon,tc-diode"; - trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", -- <&abx80x>,"abracon,tc-resistor"; -+ <&abx80x>,"abracon,tc-resistor", -+ <&rv3028>,"trickle-resistor-ohms:0"; - wakeup-source = <&ds1339>,"wakeup-source?", - <&ds3231>,"wakeup-source?", - <&mcp7940x>,"wakeup-source?", diff --git a/target/linux/brcm2708/patches-4.19/950-0395-staging-bcm2835-audio-Fix-mute-controls-volume-handl.patch b/target/linux/brcm2708/patches-4.19/950-0395-staging-bcm2835-audio-Fix-mute-controls-volume-handl.patch new file mode 100644 index 0000000000..de29b17d21 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0395-staging-bcm2835-audio-Fix-mute-controls-volume-handl.patch @@ -0,0 +1,273 @@ +From 31e4f118a750f4ddb2aeaaf02c5f3630fb50a176 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:34 +0200 +Subject: [PATCH] staging: bcm2835-audio: Fix mute controls, volume + handling cleanup + +commit 495e5a0d83d3902c741771f267a702ae19da8ab6 upstream. + +In the current code, the mute control is dealt in a special manner, +modifying the current volume and saving the old volume, etc. This is +inconsistent (e.g. change the volume while muted, then unmute), and +way too complex. + +Also, the whole volume handling code has conversion between ALSA +volume and raw volume values, which can lead to another +inconsistency and complexity. + +This patch simplifies these points: +- The ALSA volume value is saved in chip->volume +- volume->mute saves the mute state +- The mute state is evaluated only when the actual volume is passed to + the hardware, bcm2835_audio_set_ctls() + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 84 +++++++------------ + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 6 +- + .../bcm2835-audio/bcm2835-vchiq.c | 32 ++----- + .../vc04_services/bcm2835-audio/bcm2835.h | 5 +- + 4 files changed, 45 insertions(+), 82 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c +@@ -12,6 +12,21 @@ + #define CTRL_VOL_MAX 400 + #define CTRL_VOL_MIN -10239 /* originally -10240 */ + ++static int bcm2835_audio_set_chip_ctls(struct bcm2835_chip *chip) ++{ ++ int i, err = 0; ++ ++ /* change ctls for all substreams */ ++ for (i = 0; i < MAX_SUBSTREAMS; i++) { ++ if (chip->alsa_stream[i]) { ++ err = bcm2835_audio_set_ctls(chip->alsa_stream[i]); ++ if (err < 0) ++ break; ++ } ++ } ++ return err; ++} ++ + static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) + { +@@ -34,29 +49,6 @@ static int snd_bcm2835_ctl_info(struct s + return 0; + } + +-/* toggles mute on or off depending on the value of nmute, and returns +- * 1 if the mute value was changed, otherwise 0 +- */ +-static int toggle_mute(struct bcm2835_chip *chip, int nmute) +-{ +- /* if settings are ok, just return 0 */ +- if (chip->mute == nmute) +- return 0; +- +- /* if the sound is muted then we need to unmute */ +- if (chip->mute == CTRL_VOL_MUTE) { +- chip->volume = chip->old_volume; /* copy the old volume back */ +- audio_info("Unmuting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); +- } else /* otherwise we mute */ { +- chip->old_volume = chip->volume; +- chip->volume = 26214; /* set volume to minimum level AKA mute */ +- audio_info("Muting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); +- } +- +- chip->mute = nmute; +- return 1; +-} +- + static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) + { +@@ -65,7 +57,7 @@ static int snd_bcm2835_ctl_get(struct sn + mutex_lock(&chip->audio_mutex); + + if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) +- ucontrol->value.integer.value[0] = chip2alsa(chip->volume); ++ ucontrol->value.integer.value[0] = chip->volume; + else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) + ucontrol->value.integer.value[0] = chip->mute; + else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) +@@ -79,38 +71,26 @@ static int snd_bcm2835_ctl_put(struct sn + struct snd_ctl_elem_value *ucontrol) + { + struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ int val, *valp; + int changed = 0; + +- mutex_lock(&chip->audio_mutex); +- +- if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { +- audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]); +- if (chip->mute == CTRL_VOL_MUTE) { +- /* changed = toggle_mute(chip, CTRL_VOL_UNMUTE); */ +- changed = 1; /* should return 0 to signify no change but the mixer takes this as the opposite sign (no idea why) */ +- goto unlock; +- } +- if (changed || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) { +- chip->volume = alsa2chip(ucontrol->value.integer.value[0]); +- changed = 1; +- } +- +- } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { +- /* Now implemented */ +- audio_info(" Mute attempted\n"); +- changed = toggle_mute(chip, ucontrol->value.integer.value[0]); ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) ++ valp = &chip->volume; ++ else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) ++ valp = &chip->mute; ++ else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) ++ valp = &chip->dest; ++ else ++ return -EINVAL; + +- } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { +- if (ucontrol->value.integer.value[0] != chip->dest) { +- chip->dest = ucontrol->value.integer.value[0]; +- changed = 1; +- } ++ val = ucontrol->value.integer.value[0]; ++ mutex_lock(&chip->audio_mutex); ++ if (val != *valp) { ++ *valp = val; ++ changed = 1; ++ if (bcm2835_audio_set_chip_ctls(chip)) ++ dev_err(chip->card->dev, "Failed to set ALSA controls..\n"); + } +- +- if (changed && bcm2835_audio_set_ctls(chip)) +- dev_err(chip->card->dev, "Failed to set ALSA controls..\n"); +- +-unlock: + mutex_unlock(&chip->audio_mutex); + return changed; + } +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -280,7 +280,7 @@ static int snd_bcm2835_pcm_prepare(struc + bcm2835_audio_setup(alsa_stream); + + /* in preparation of the stream, set the controls (volume level) of the stream */ +- bcm2835_audio_set_ctls(alsa_stream->chip); ++ bcm2835_audio_set_ctls(alsa_stream); + + memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); + +@@ -441,7 +441,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_c + strcpy(pcm->name, "bcm2835 ALSA"); + chip->pcm = pcm; + chip->dest = AUDIO_DEST_AUTO; +- chip->volume = alsa2chip(0); ++ chip->volume = 0; + chip->mute = CTRL_VOL_UNMUTE; /*disable mute on startup */ + /* set operators */ + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, +@@ -498,7 +498,7 @@ int snd_bcm2835_new_simple_pcm(struct bc + strcpy(pcm->name, name); + chip->pcm = pcm; + chip->dest = route; +- chip->volume = alsa2chip(0); ++ chip->volume = 0; + chip->mute = CTRL_VOL_UNMUTE; + + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -460,11 +460,11 @@ free_wq: + return ret; + } + +-static int bcm2835_audio_set_ctls_chan(struct bcm2835_alsa_stream *alsa_stream, +- struct bcm2835_chip *chip) ++int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream) + { + struct vc_audio_msg m; + struct bcm2835_audio_instance *instance = alsa_stream->instance; ++ struct bcm2835_chip *chip = alsa_stream->chip; + int status; + int ret; + +@@ -478,7 +478,10 @@ static int bcm2835_audio_set_ctls_chan(s + + m.type = VC_AUDIO_MSG_TYPE_CONTROL; + m.u.control.dest = chip->dest; +- m.u.control.volume = chip->volume; ++ if (!chip->mute) ++ m.u.control.volume = CHIP_MIN_VOLUME; ++ else ++ m.u.control.volume = alsa2chip(chip->volume); + + /* Create the message available completion */ + init_completion(&instance->msg_avail_comp); +@@ -514,27 +517,6 @@ unlock: + return ret; + } + +-int bcm2835_audio_set_ctls(struct bcm2835_chip *chip) +-{ +- int i; +- int ret = 0; +- +- LOG_DBG(" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume); +- +- /* change ctls for all substreams */ +- for (i = 0; i < MAX_SUBSTREAMS; i++) { +- if (!chip->alsa_stream[i]) +- continue; +- if (bcm2835_audio_set_ctls_chan(chip->alsa_stream[i], chip) != 0) { +- LOG_ERR("Couldn't set the controls for stream %d\n", i); +- ret = -1; +- } else { +- LOG_DBG(" Controls set for stream %d\n", i); +- } +- } +- return ret; +-} +- + int bcm2835_audio_set_params(struct bcm2835_alsa_stream *alsa_stream, + unsigned int channels, unsigned int samplerate, + unsigned int bps) +@@ -548,7 +530,7 @@ int bcm2835_audio_set_params(struct bcm2 + channels, samplerate, bps); + + /* resend ctls - alsa_stream may not have been open when first send */ +- ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip); ++ ret = bcm2835_audio_set_ctls(alsa_stream); + if (ret) { + LOG_ERR(" Alsa controls not supported\n"); + return -EINVAL; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -74,6 +74,8 @@ enum { + // convert chip to alsa volume + #define chip2alsa(vol) -(((vol) * 100) >> 8) + ++#define CHIP_MIN_VOLUME 26214 /* minimum level aka mute */ ++ + /* Some constants for values .. */ + enum snd_bcm2835_route { + AUDIO_DEST_AUTO = 0, +@@ -102,7 +104,6 @@ struct bcm2835_chip { + struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS]; + + int volume; +- int old_volume; /* stores the volume value whist muted */ + int dest; + int mute; + +@@ -160,7 +161,7 @@ int bcm2835_audio_set_params(struct bcm2 + int bcm2835_audio_setup(struct bcm2835_alsa_stream *alsa_stream); + int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream); + int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream); +-int bcm2835_audio_set_ctls(struct bcm2835_chip *chip); ++int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream); + int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream, + unsigned int count, + void *src); diff --git a/target/linux/brcm2708/patches-4.19/950-0396-ASoC-tlv320aic32x4-SND_SOC_DAPM_MICBIAS-is-deprecate.patch b/target/linux/brcm2708/patches-4.19/950-0396-ASoC-tlv320aic32x4-SND_SOC_DAPM_MICBIAS-is-deprecate.patch deleted file mode 100644 index 4b9d629e81..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0396-ASoC-tlv320aic32x4-SND_SOC_DAPM_MICBIAS-is-deprecate.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 053938f67f73773152f70d89aa32e7893ee19694 Mon Sep 17 00:00:00 2001 -From: b-ak -Date: Wed, 9 Jan 2019 22:41:21 +0530 -Subject: [PATCH 396/806] ASoC: tlv320aic32x4: SND_SOC_DAPM_MICBIAS is - deprecated - -commit 04d979d7a7bac2f645cd827ea37e5ffa5b4e1f97 upstream. - -SND_SOC_DAPM_MICBIAS is deprecated, replace it with SND_SOC_DAPM_SUPPLY. - -MICBIAS voltage wasn't supplied to the microphone with the older -SND_SOC_DAPM_MICBIAS widget, hence the microphone wouldn't work. - -This patch fixes the problem. - -Signed-off-by: b-ak -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 30 +++++++++++++++++++++++++++++- - sound/soc/codecs/tlv320aic32x4.h | 1 + - 2 files changed, 30 insertions(+), 1 deletion(-) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -79,6 +79,32 @@ struct aic32x4_priv { - struct device *dev; - }; - -+static int mic_bias_event(struct snd_soc_dapm_widget *w, -+ struct snd_kcontrol *kcontrol, int event) -+{ -+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); -+ -+ switch (event) { -+ case SND_SOC_DAPM_POST_PMU: -+ /* Change Mic Bias Registor */ -+ snd_soc_component_update_bits(component, AIC32X4_MICBIAS, -+ AIC32x4_MICBIAS_MASK, -+ AIC32X4_MICBIAS_LDOIN | -+ AIC32X4_MICBIAS_2075V); -+ printk(KERN_DEBUG "%s: Mic Bias will be turned ON\n", __func__); -+ break; -+ case SND_SOC_DAPM_PRE_PMD: -+ snd_soc_component_update_bits(component, AIC32X4_MICBIAS, -+ AIC32x4_MICBIAS_MASK, 0); -+ printk(KERN_DEBUG "%s: Mic Bias will be turned OFF\n", -+ __func__); -+ break; -+ } -+ -+ return 0; -+} -+ -+ - static int aic32x4_get_mfp1_gpio(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) - { -@@ -450,7 +476,9 @@ static const struct snd_soc_dapm_widget - SND_SOC_DAPM_MUX("IN3_R to Left Mixer Negative Resistor", SND_SOC_NOPM, 0, 0, - in3r_to_lmixer_controls), - -- SND_SOC_DAPM_MICBIAS("Mic Bias", AIC32X4_MICBIAS, 6, 0), -+ SND_SOC_DAPM_SUPPLY("Mic Bias", AIC32X4_MICBIAS, 6, 0, mic_bias_event, -+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), -+ - - SND_SOC_DAPM_OUTPUT("HPL"), - SND_SOC_DAPM_OUTPUT("HPR"), ---- a/sound/soc/codecs/tlv320aic32x4.h -+++ b/sound/soc/codecs/tlv320aic32x4.h -@@ -195,6 +195,7 @@ int aic32x4_remove(struct device *dev); - /* AIC32X4_MICBIAS */ - #define AIC32X4_MICBIAS_LDOIN BIT(3) - #define AIC32X4_MICBIAS_2075V 0x60 -+#define AIC32x4_MICBIAS_MASK GENMASK(6, 3) - - /* AIC32X4_LMICPGANIN */ - #define AIC32X4_LMICPGANIN_IN2R_10K 0x10 diff --git a/target/linux/brcm2708/patches-4.19/950-0396-staging-bcm2835-audio-Remove-redundant-function-call.patch b/target/linux/brcm2708/patches-4.19/950-0396-staging-bcm2835-audio-Remove-redundant-function-call.patch new file mode 100644 index 0000000000..482c9ba5cc --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0396-staging-bcm2835-audio-Remove-redundant-function-call.patch @@ -0,0 +1,95 @@ +From 79a3c1a4419b2bf04f6ff5ef84cd74b0456fdd9a Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:35 +0200 +Subject: [PATCH] staging: bcm2835-audio: Remove redundant function + calls + +commit 124950ebe9fa8547c59e8d4acc8d6c59e6278ed6 upstream. + +bcm2835_audio_setup(), bcm2835_audio_flush_buffers() and +bcm2835_audio_flush_playback_buffers() functions do implement +nothing. + +Also, bcm2835_audio_set_ctls() is already called inside +bcm2835_audio_set_params(), so the later call is superfluous. + +This patch removes these superfluous implementations. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 5 ----- + .../bcm2835-audio/bcm2835-vchiq.c | 21 ------------------- + .../vc04_services/bcm2835-audio/bcm2835.h | 3 --- + 3 files changed, 29 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -277,11 +277,6 @@ static int snd_bcm2835_pcm_prepare(struc + if (err < 0) + audio_error(" error setting hw params\n"); + +- bcm2835_audio_setup(alsa_stream); +- +- /* in preparation of the stream, set the controls (volume level) of the stream */ +- bcm2835_audio_set_ctls(alsa_stream); +- + memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); + + alsa_stream->pcm_indirect.hw_buffer_size = +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -580,12 +580,6 @@ unlock: + return ret; + } + +-int bcm2835_audio_setup(struct bcm2835_alsa_stream *alsa_stream) +-{ +- +- return 0; +-} +- + static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream) + { + struct vc_audio_msg m; +@@ -774,21 +768,6 @@ unlock: + return ret; + } + +-/** +- * Returns all buffers from arm->vc +- */ +-void bcm2835_audio_flush_buffers(struct bcm2835_alsa_stream *alsa_stream) +-{ +-} +- +-/** +- * Forces VC to flush(drop) its filled playback buffers and +- * return them the us. (VC->ARM) +- */ +-void bcm2835_audio_flush_playback_buffers(struct bcm2835_alsa_stream *alsa_stream) +-{ +-} +- + unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream) + { + unsigned int count = atomic_read(&alsa_stream->retrieved); +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -158,7 +158,6 @@ int bcm2835_audio_close(struct bcm2835_a + int bcm2835_audio_set_params(struct bcm2835_alsa_stream *alsa_stream, + unsigned int channels, unsigned int samplerate, + unsigned int bps); +-int bcm2835_audio_setup(struct bcm2835_alsa_stream *alsa_stream); + int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream); + int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream); + int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream); +@@ -167,7 +166,5 @@ int bcm2835_audio_write(struct bcm2835_a + void *src); + void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream); + unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream); +-void bcm2835_audio_flush_buffers(struct bcm2835_alsa_stream *alsa_stream); +-void bcm2835_audio_flush_playback_buffers(struct bcm2835_alsa_stream *alsa_stream); + + #endif /* __SOUND_ARM_BCM2835_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0397-ASoC-tlv320aic32x4-Break-out-clock-setting-into-sepa.patch b/target/linux/brcm2708/patches-4.19/950-0397-ASoC-tlv320aic32x4-Break-out-clock-setting-into-sepa.patch deleted file mode 100644 index 1b069f6f1c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0397-ASoC-tlv320aic32x4-Break-out-clock-setting-into-sepa.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 95b3311cbcd29e07af1ee96b6b37c9089567bcff Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Mon, 18 Mar 2019 20:37:44 -0700 -Subject: [PATCH 397/806] ASoC: tlv320aic32x4: Break out clock setting into - separate function - -commit bf31cbfbe25001036e1e096b1c260bf871766ea5 upstream. - -Break the clock setting logic out from the main hw_params. It's -rather large and unweildy and makes for a large function. This -also better enables some of the following changes to the clock -tree access in the driver. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 26 ++++++++++++++++++-------- - 1 file changed, 18 insertions(+), 8 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -698,17 +698,13 @@ static int aic32x4_set_dai_fmt(struct sn - return 0; - } - --static int aic32x4_hw_params(struct snd_pcm_substream *substream, -- struct snd_pcm_hw_params *params, -- struct snd_soc_dai *dai) -+static int aic32x4_setup_clocks(struct snd_soc_component *component, -+ unsigned int sample_rate, -+ unsigned int parent_rate) - { -- struct snd_soc_component *component = dai->component; -- struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); -- u8 iface1_reg = 0; -- u8 dacsetup_reg = 0; - int i; - -- i = aic32x4_get_divs(aic32x4->sysclk, params_rate(params)); -+ i = aic32x4_get_divs(parent_rate, sample_rate); - if (i < 0) { - printk(KERN_ERR "aic32x4: sampling rate not supported\n"); - return i; -@@ -765,6 +761,20 @@ static int aic32x4_hw_params(struct snd_ - snd_soc_component_update_bits(component, AIC32X4_BCLKN, - AIC32X4_BCLK_MASK, aic32x4_divs[i].blck_N); - -+ return 0; -+} -+ -+static int aic32x4_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params, -+ struct snd_soc_dai *dai) -+{ -+ struct snd_soc_component *component = dai->component; -+ struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); -+ u8 iface1_reg = 0; -+ u8 dacsetup_reg = 0; -+ -+ aic32x4_setup_clocks(component, params_rate(params), aic32x4->sysclk); -+ - switch (params_width(params)) { - case 16: - iface1_reg |= (AIC32X4_WORD_LEN_16BITS << diff --git a/target/linux/brcm2708/patches-4.19/950-0397-staging-bcm2835-audio-Remove-superfluous-open-flag.patch b/target/linux/brcm2708/patches-4.19/950-0397-staging-bcm2835-audio-Remove-superfluous-open-flag.patch new file mode 100644 index 0000000000..121846d802 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0397-staging-bcm2835-audio-Remove-superfluous-open-flag.patch @@ -0,0 +1,61 @@ +From af2fe52ef43c1aa6a24d1c51ad3ccddc39a12c51 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:36 +0200 +Subject: [PATCH] staging: bcm2835-audio: Remove superfluous open flag + +commit ad13924de6b07cb52714ea1809c57b2e72a24504 upstream. + +All the alsa_stream->open flag checks in the current code are +redundant, and they cannot be racy. For the code simplification, +let's remove the flag and its check. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 9 ++------- + drivers/staging/vc04_services/bcm2835-audio/bcm2835.h | 1 - + 2 files changed, 2 insertions(+), 8 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -57,8 +57,7 @@ void bcm2835_playback_fifo(struct bcm283 + audio_info("alsa_stream=%p substream=%p\n", alsa_stream, + alsa_stream ? alsa_stream->substream : 0); + +- if (alsa_stream->open) +- consumed = bcm2835_audio_retrieve_buffers(alsa_stream); ++ consumed = bcm2835_audio_retrieve_buffers(alsa_stream); + + /* We get called only if playback was triggered, So, the number of buffers we retrieve in + * each iteration are the buffers that have been played out already +@@ -154,7 +153,6 @@ static int snd_bcm2835_playback_open_gen + chip->alsa_stream[idx] = alsa_stream; + + chip->opened |= (1 << idx); +- alsa_stream->open = 1; + alsa_stream->draining = 1; + + out: +@@ -205,10 +203,7 @@ static int snd_bcm2835_playback_close(st + alsa_stream->period_size = 0; + alsa_stream->buffer_size = 0; + +- if (alsa_stream->open) { +- alsa_stream->open = 0; +- bcm2835_audio_close(alsa_stream); +- } ++ bcm2835_audio_close(alsa_stream); + if (alsa_stream->chip) + alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; + /* +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -121,7 +121,6 @@ struct bcm2835_alsa_stream { + + spinlock_t lock; + +- int open; + int running; + int draining; + diff --git a/target/linux/brcm2708/patches-4.19/950-0398-ASoC-tlv320aic32x4-Properly-Set-Processing-Blocks.patch b/target/linux/brcm2708/patches-4.19/950-0398-ASoC-tlv320aic32x4-Properly-Set-Processing-Blocks.patch deleted file mode 100644 index b405fd67b2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0398-ASoC-tlv320aic32x4-Properly-Set-Processing-Blocks.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 6cc882cf38b62fce2a07640413b05b43b420c77a Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Wed, 20 Mar 2019 19:38:44 -0700 -Subject: [PATCH 398/806] ASoC: tlv320aic32x4: Properly Set Processing Blocks - -commit c95e3a4b96293403a427b5185e60fad28af51fdd upstream. - -Different processing blocks are required for different sampling -rates and power parameters. Set the processing blocks based -on this information. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 56 ++++++++++++++++++++------------ - 1 file changed, 36 insertions(+), 20 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -59,6 +59,8 @@ struct aic32x4_rate_divs { - u8 nadc; - u8 madc; - u8 blck_N; -+ u8 r_block; -+ u8 p_block; - }; - - struct aic32x4_priv { -@@ -307,34 +309,34 @@ static const struct snd_kcontrol_new aic - - static const struct aic32x4_rate_divs aic32x4_divs[] = { - /* 8k rate */ -- {12000000, 8000, 1, 7, 6800, 768, 5, 3, 128, 5, 18, 24}, -- {24000000, 8000, 2, 7, 6800, 768, 15, 1, 64, 45, 4, 24}, -- {25000000, 8000, 2, 7, 3728, 768, 15, 1, 64, 45, 4, 24}, -+ {12000000, 8000, 1, 7, 6800, 768, 5, 3, 128, 5, 18, 24, 1, 1}, -+ {24000000, 8000, 2, 7, 6800, 768, 15, 1, 64, 45, 4, 24, 1, 1}, -+ {25000000, 8000, 2, 7, 3728, 768, 15, 1, 64, 45, 4, 24, 1, 1}, - /* 11.025k rate */ -- {12000000, 11025, 1, 7, 5264, 512, 8, 2, 128, 8, 8, 16}, -- {24000000, 11025, 2, 7, 5264, 512, 16, 1, 64, 32, 4, 16}, -+ {12000000, 11025, 1, 7, 5264, 512, 8, 2, 128, 8, 8, 16, 1, 1}, -+ {24000000, 11025, 2, 7, 5264, 512, 16, 1, 64, 32, 4, 16, 1, 1}, - /* 16k rate */ -- {12000000, 16000, 1, 7, 6800, 384, 5, 3, 128, 5, 9, 12}, -- {24000000, 16000, 2, 7, 6800, 384, 15, 1, 64, 18, 5, 12}, -- {25000000, 16000, 2, 7, 3728, 384, 15, 1, 64, 18, 5, 12}, -+ {12000000, 16000, 1, 7, 6800, 384, 5, 3, 128, 5, 9, 12, 1, 1}, -+ {24000000, 16000, 2, 7, 6800, 384, 15, 1, 64, 18, 5, 12, 1, 1}, -+ {25000000, 16000, 2, 7, 3728, 384, 15, 1, 64, 18, 5, 12, 1, 1}, - /* 22.05k rate */ -- {12000000, 22050, 1, 7, 5264, 256, 4, 4, 128, 4, 8, 8}, -- {24000000, 22050, 2, 7, 5264, 256, 16, 1, 64, 16, 4, 8}, -- {25000000, 22050, 2, 7, 2253, 256, 16, 1, 64, 16, 4, 8}, -+ {12000000, 22050, 1, 7, 5264, 256, 4, 4, 128, 4, 8, 8, 1, 1}, -+ {24000000, 22050, 2, 7, 5264, 256, 16, 1, 64, 16, 4, 8, 1, 1}, -+ {25000000, 22050, 2, 7, 2253, 256, 16, 1, 64, 16, 4, 8, 1, 1}, - /* 32k rate */ -- {12000000, 32000, 1, 7, 1680, 192, 2, 7, 64, 2, 21, 6}, -- {24000000, 32000, 2, 7, 1680, 192, 7, 2, 64, 7, 6, 6}, -+ {12000000, 32000, 1, 7, 1680, 192, 2, 7, 64, 2, 21, 6, 1, 1}, -+ {24000000, 32000, 2, 7, 1680, 192, 7, 2, 64, 7, 6, 6, 1, 1}, - /* 44.1k rate */ -- {12000000, 44100, 1, 7, 5264, 128, 2, 8, 128, 2, 8, 4}, -- {24000000, 44100, 2, 7, 5264, 128, 8, 2, 64, 8, 4, 4}, -- {25000000, 44100, 2, 7, 2253, 128, 8, 2, 64, 8, 4, 4}, -+ {12000000, 44100, 1, 7, 5264, 128, 2, 8, 128, 2, 8, 4, 1, 1}, -+ {24000000, 44100, 2, 7, 5264, 128, 8, 2, 64, 8, 4, 4, 1, 1}, -+ {25000000, 44100, 2, 7, 2253, 128, 8, 2, 64, 8, 4, 4, 1, 1}, - /* 48k rate */ -- {12000000, 48000, 1, 8, 1920, 128, 2, 8, 128, 2, 8, 4}, -- {24000000, 48000, 2, 8, 1920, 128, 8, 2, 64, 8, 4, 4}, -- {25000000, 48000, 2, 7, 8643, 128, 8, 2, 64, 8, 4, 4}, -+ {12000000, 48000, 1, 8, 1920, 128, 2, 8, 128, 2, 8, 4, 1, 1}, -+ {24000000, 48000, 2, 8, 1920, 128, 8, 2, 64, 8, 4, 4, 1, 1}, -+ {25000000, 48000, 2, 7, 8643, 128, 8, 2, 64, 8, 4, 4, 1, 1}, - - /* 96k rate */ -- {25000000, 96000, 2, 7, 8643, 64, 4, 4, 64, 4, 4, 1}, -+ {25000000, 96000, 2, 7, 8643, 64, 4, 4, 64, 4, 4, 1, 1, 9}, - }; - - static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { -@@ -698,6 +700,18 @@ static int aic32x4_set_dai_fmt(struct sn - return 0; - } - -+static int aic32x4_set_processing_blocks(struct snd_soc_component *component, -+ u8 r_block, u8 p_block) -+{ -+ if (r_block > 18 || p_block > 25) -+ return -EINVAL; -+ -+ snd_soc_component_write(component, AIC32X4_ADCSPB, r_block); -+ snd_soc_component_write(component, AIC32X4_DACSPB, p_block); -+ -+ return 0; -+} -+ - static int aic32x4_setup_clocks(struct snd_soc_component *component, - unsigned int sample_rate, - unsigned int parent_rate) -@@ -710,6 +724,8 @@ static int aic32x4_setup_clocks(struct s - return i; - } - -+ aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); -+ - /* MCLK as PLL_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_CLKMUX, AIC32X4_PLL_CLKIN_MASK, - AIC32X4_PLL_CLKIN_MCLK << AIC32X4_PLL_CLKIN_SHIFT); diff --git a/target/linux/brcm2708/patches-4.19/950-0398-staging-bcm2835-audio-Drop-useless-running-flag-and-.patch b/target/linux/brcm2708/patches-4.19/950-0398-staging-bcm2835-audio-Drop-useless-running-flag-and-.patch new file mode 100644 index 0000000000..2a8197c68d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0398-staging-bcm2835-audio-Drop-useless-running-flag-and-.patch @@ -0,0 +1,106 @@ +From e8a202b4d06a07ba42b91a1dd3c2d9e9cedff32d Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:37 +0200 +Subject: [PATCH] staging: bcm2835-audio: Drop useless running flag and + check + +commit 02f2376321d75e78117f39ff81f215254ee6b4ef upstream. + +The running flag of alsa_stream is basically useless. The running +state is strictly controlled in ALSA PCM core side, hence the check in +PCM trigger and close callbacks are superfluous. + +Also, the prefill ack at trigger start became superfluous nowadays +with the ALSA PCM core update. + +Let's rip them off. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 46 ++++--------------- + .../vc04_services/bcm2835-audio/bcm2835.h | 1 - + 2 files changed, 8 insertions(+), 39 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -187,19 +187,6 @@ static int snd_bcm2835_playback_close(st + + audio_info("Alsa close\n"); + +- /* +- * Call stop if it's still running. This happens when app +- * is force killed and we don't get a stop trigger. +- */ +- if (alsa_stream->running) { +- int err; +- +- err = bcm2835_audio_stop(alsa_stream); +- alsa_stream->running = 0; +- if (err) +- audio_error(" Failed to STOP alsa device\n"); +- } +- + alsa_stream->period_size = 0; + alsa_stream->buffer_size = 0; + +@@ -324,27 +311,13 @@ static int snd_bcm2835_pcm_trigger(struc + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: +- audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n", +- alsa_stream->running); +- if (!alsa_stream->running) { +- err = bcm2835_audio_start(alsa_stream); +- if (!err) { +- alsa_stream->pcm_indirect.hw_io = +- alsa_stream->pcm_indirect.hw_data = +- bytes_to_frames(runtime, +- alsa_stream->pos); +- substream->ops->ack(substream); +- alsa_stream->running = 1; +- alsa_stream->draining = 1; +- } else { +- audio_error(" Failed to START alsa device (%d)\n", err); +- } +- } ++ err = bcm2835_audio_start(alsa_stream); ++ if (!err) ++ alsa_stream->draining = 1; ++ else ++ audio_error(" Failed to START alsa device (%d)\n", err); + break; + case SNDRV_PCM_TRIGGER_STOP: +- audio_debug +- ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n", +- alsa_stream->running, runtime->status->state == SNDRV_PCM_STATE_DRAINING); + if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) { + audio_info("DRAINING\n"); + alsa_stream->draining = 1; +@@ -352,12 +325,9 @@ static int snd_bcm2835_pcm_trigger(struc + audio_info("DROPPING\n"); + alsa_stream->draining = 0; + } +- if (alsa_stream->running) { +- err = bcm2835_audio_stop(alsa_stream); +- if (err != 0) +- audio_error(" Failed to STOP alsa device (%d)\n", err); +- alsa_stream->running = 0; +- } ++ err = bcm2835_audio_stop(alsa_stream); ++ if (err != 0) ++ audio_error(" Failed to STOP alsa device (%d)\n", err); + break; + default: + err = -EINVAL; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -121,7 +121,6 @@ struct bcm2835_alsa_stream { + + spinlock_t lock; + +- int running; + int draining; + + int channels; diff --git a/target/linux/brcm2708/patches-4.19/950-0399-ASoC-tlv320aic32x4-Model-PLL-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0399-ASoC-tlv320aic32x4-Model-PLL-in-CCF.patch deleted file mode 100644 index fb6ab5db8e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0399-ASoC-tlv320aic32x4-Model-PLL-in-CCF.patch +++ /dev/null @@ -1,877 +0,0 @@ -From 957ccf05060d65da074d019679ec7f486477e412 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:45 -0700 -Subject: [PATCH 399/806] ASoC: tlv320aic32x4: Model PLL in CCF - -commit 514b044cba667e4b7c383ec79b42b997e624b91d upstream. - -Model and manage the on-board PLL as a component in the Core -Clock Framework. This should allow us to do some more complex -clock management and power control. Also, some of the -on-board chip clocks can be exposed to the outside, and this -change will make those clocks easier to consume by other -parts of the kernel. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/Kconfig | 1 + - sound/soc/codecs/Makefile | 2 +- - sound/soc/codecs/tlv320aic32x4-clk.c | 323 +++++++++++++++++++++++++++ - sound/soc/codecs/tlv320aic32x4.c | 195 ++++++++-------- - sound/soc/codecs/tlv320aic32x4.h | 5 + - 5 files changed, 431 insertions(+), 95 deletions(-) - create mode 100644 sound/soc/codecs/tlv320aic32x4-clk.c - ---- a/sound/soc/codecs/Kconfig -+++ b/sound/soc/codecs/Kconfig -@@ -1025,6 +1025,7 @@ config SND_SOC_TLV320AIC31XX - - config SND_SOC_TLV320AIC32X4 - tristate -+ depends on COMMON_CLK - - config SND_SOC_TLV320AIC32X4_I2C - tristate "Texas Instruments TLV320AIC32x4 audio CODECs - I2C" ---- a/sound/soc/codecs/Makefile -+++ b/sound/soc/codecs/Makefile -@@ -182,7 +182,7 @@ snd-soc-tlv320aic23-i2c-objs := tlv320ai - snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o - snd-soc-tlv320aic26-objs := tlv320aic26.o - snd-soc-tlv320aic31xx-objs := tlv320aic31xx.o --snd-soc-tlv320aic32x4-objs := tlv320aic32x4.o -+snd-soc-tlv320aic32x4-objs := tlv320aic32x4.o tlv320aic32x4-clk.o - snd-soc-tlv320aic32x4-i2c-objs := tlv320aic32x4-i2c.o - snd-soc-tlv320aic32x4-spi-objs := tlv320aic32x4-spi.o - snd-soc-tlv320aic3x-objs := tlv320aic3x.o ---- /dev/null -+++ b/sound/soc/codecs/tlv320aic32x4-clk.c -@@ -0,0 +1,323 @@ -+/* SPDX-License-Identifier: GPL-2.0 -+ * -+ * Clock Tree for the Texas Instruments TLV320AIC32x4 -+ * -+ * Copyright 2019 Annaliese McDermond -+ * -+ * Author: Annaliese McDermond -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include "tlv320aic32x4.h" -+ -+#define to_clk_aic32x4(_hw) container_of(_hw, struct clk_aic32x4, hw) -+struct clk_aic32x4 { -+ struct clk_hw hw; -+ struct device *dev; -+ struct regmap *regmap; -+ unsigned int reg; -+}; -+ -+/* -+ * struct clk_aic32x4_pll_muldiv - Multiplier/divider settings -+ * @p: Divider -+ * @r: first multiplier -+ * @j: integer part of second multiplier -+ * @d: decimal part of second multiplier -+ */ -+struct clk_aic32x4_pll_muldiv { -+ u8 p; -+ u16 r; -+ u8 j; -+ u16 d; -+}; -+ -+struct aic32x4_clkdesc { -+ const char *name; -+ const char * const *parent_names; -+ unsigned int num_parents; -+ const struct clk_ops *ops; -+ unsigned int reg; -+}; -+ -+static int clk_aic32x4_pll_prepare(struct clk_hw *hw) -+{ -+ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); -+ -+ return regmap_update_bits(pll->regmap, AIC32X4_PLLPR, -+ AIC32X4_PLLEN, AIC32X4_PLLEN); -+} -+ -+static void clk_aic32x4_pll_unprepare(struct clk_hw *hw) -+{ -+ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); -+ -+ regmap_update_bits(pll->regmap, AIC32X4_PLLPR, -+ AIC32X4_PLLEN, 0); -+} -+ -+static int clk_aic32x4_pll_is_prepared(struct clk_hw *hw) -+{ -+ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); -+ -+ unsigned int val; -+ int ret; -+ -+ ret = regmap_read(pll->regmap, AIC32X4_PLLPR, &val); -+ if (ret < 0) -+ return ret; -+ -+ return !!(val & AIC32X4_PLLEN); -+} -+ -+static int clk_aic32x4_pll_get_muldiv(struct clk_aic32x4 *pll, -+ struct clk_aic32x4_pll_muldiv *settings) -+{ -+ /* Change to use regmap_bulk_read? */ -+ unsigned int val; -+ int ret; -+ -+ ret = regmap_read(pll->regmap, AIC32X4_PLLPR, &val); -+ if (ret) -+ return ret; -+ settings->r = val & AIC32X4_PLL_R_MASK; -+ settings->p = (val & AIC32X4_PLL_P_MASK) >> AIC32X4_PLL_P_SHIFT; -+ -+ ret = regmap_read(pll->regmap, AIC32X4_PLLJ, &val); -+ if (ret < 0) -+ return ret; -+ settings->j = val; -+ -+ ret = regmap_read(pll->regmap, AIC32X4_PLLDMSB, &val); -+ if (ret < 0) -+ return ret; -+ settings->d = val << 8; -+ -+ ret = regmap_read(pll->regmap, AIC32X4_PLLDLSB, &val); -+ if (ret < 0) -+ return ret; -+ settings->d |= val; -+ -+ return 0; -+} -+ -+static int clk_aic32x4_pll_set_muldiv(struct clk_aic32x4 *pll, -+ struct clk_aic32x4_pll_muldiv *settings) -+{ -+ int ret; -+ /* Change to use regmap_bulk_write for some if not all? */ -+ -+ ret = regmap_update_bits(pll->regmap, AIC32X4_PLLPR, -+ AIC32X4_PLL_R_MASK, settings->r); -+ if (ret < 0) -+ return ret; -+ -+ ret = regmap_update_bits(pll->regmap, AIC32X4_PLLPR, -+ AIC32X4_PLL_P_MASK, -+ settings->p << AIC32X4_PLL_P_SHIFT); -+ if (ret < 0) -+ return ret; -+ -+ ret = regmap_write(pll->regmap, AIC32X4_PLLJ, settings->j); -+ if (ret < 0) -+ return ret; -+ -+ ret = regmap_write(pll->regmap, AIC32X4_PLLDMSB, (settings->d >> 8)); -+ if (ret < 0) -+ return ret; -+ ret = regmap_write(pll->regmap, AIC32X4_PLLDLSB, (settings->d & 0xff)); -+ if (ret < 0) -+ return ret; -+ -+ return 0; -+} -+ -+static unsigned long clk_aic32x4_pll_calc_rate( -+ struct clk_aic32x4_pll_muldiv *settings, -+ unsigned long parent_rate) -+{ -+ u64 rate; -+ /* -+ * We scale j by 10000 to account for the decimal part of P and divide -+ * it back out later. -+ */ -+ rate = (u64) parent_rate * settings->r * -+ ((settings->j * 10000) + settings->d); -+ -+ return (unsigned long) DIV_ROUND_UP_ULL(rate, settings->p * 10000); -+} -+ -+static int clk_aic32x4_pll_calc_muldiv(struct clk_aic32x4_pll_muldiv *settings, -+ unsigned long rate, unsigned long parent_rate) -+{ -+ u64 multiplier; -+ -+ settings->p = parent_rate / AIC32X4_MAX_PLL_CLKIN + 1; -+ if (settings->p > 8) -+ return -1; -+ -+ /* -+ * We scale this figure by 10000 so that we can get the decimal part -+ * of the multiplier. This is because we can't do floating point -+ * math in the kernel. -+ */ -+ multiplier = (u64) rate * settings->p * 10000; -+ do_div(multiplier, parent_rate); -+ -+ /* -+ * J can't be over 64, so R can scale this. -+ * R can't be greater than 4. -+ */ -+ settings->r = ((u32) multiplier / 640000) + 1; -+ if (settings->r > 4) -+ return -1; -+ do_div(multiplier, settings->r); -+ -+ /* -+ * J can't be < 1. -+ */ -+ if (multiplier < 10000) -+ return -1; -+ -+ /* Figure out the integer part, J, and the fractional part, D. */ -+ settings->j = (u32) multiplier / 10000; -+ settings->d = (u32) multiplier % 10000; -+ -+ return 0; -+} -+ -+static unsigned long clk_aic32x4_pll_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); -+ struct clk_aic32x4_pll_muldiv settings; -+ int ret; -+ -+ ret = clk_aic32x4_pll_get_muldiv(pll, &settings); -+ if (ret < 0) -+ return 0; -+ -+ return clk_aic32x4_pll_calc_rate(&settings, parent_rate); -+} -+ -+static long clk_aic32x4_pll_round_rate(struct clk_hw *hw, -+ unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ struct clk_aic32x4_pll_muldiv settings; -+ int ret; -+ -+ ret = clk_aic32x4_pll_calc_muldiv(&settings, rate, *parent_rate); -+ if (ret < 0) -+ return 0; -+ -+ return clk_aic32x4_pll_calc_rate(&settings, *parent_rate); -+} -+ -+static int clk_aic32x4_pll_set_rate(struct clk_hw *hw, -+ unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); -+ struct clk_aic32x4_pll_muldiv settings; -+ int ret; -+ -+ ret = clk_aic32x4_pll_calc_muldiv(&settings, rate, parent_rate); -+ if (ret < 0) -+ return -EINVAL; -+ -+ return clk_aic32x4_pll_set_muldiv(pll, &settings); -+} -+ -+static int clk_aic32x4_pll_set_parent(struct clk_hw *hw, u8 index) -+{ -+ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); -+ -+ return regmap_update_bits(pll->regmap, -+ AIC32X4_CLKMUX, -+ AIC32X4_PLL_CLKIN_MASK, -+ index << AIC32X4_PLL_CLKIN_SHIFT); -+} -+ -+static u8 clk_aic32x4_pll_get_parent(struct clk_hw *hw) -+{ -+ struct clk_aic32x4 *pll = to_clk_aic32x4(hw); -+ unsigned int val; -+ -+ regmap_read(pll->regmap, AIC32X4_PLLPR, &val); -+ -+ return (val & AIC32X4_PLL_CLKIN_MASK) >> AIC32X4_PLL_CLKIN_SHIFT; -+} -+ -+ -+static const struct clk_ops aic32x4_pll_ops = { -+ .prepare = clk_aic32x4_pll_prepare, -+ .unprepare = clk_aic32x4_pll_unprepare, -+ .is_prepared = clk_aic32x4_pll_is_prepared, -+ .recalc_rate = clk_aic32x4_pll_recalc_rate, -+ .round_rate = clk_aic32x4_pll_round_rate, -+ .set_rate = clk_aic32x4_pll_set_rate, -+ .set_parent = clk_aic32x4_pll_set_parent, -+ .get_parent = clk_aic32x4_pll_get_parent, -+}; -+ -+static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { -+ { -+ .name = "pll", -+ .parent_names = -+ (const char* []) { "mclk", "bclk", "gpio", "din" }, -+ .num_parents = 4, -+ .ops = &aic32x4_pll_ops, -+ .reg = 0, -+ }, -+}; -+ -+static struct clk *aic32x4_register_clk(struct device *dev, -+ struct aic32x4_clkdesc *desc) -+{ -+ struct clk_init_data init; -+ struct clk_aic32x4 *priv; -+ const char *devname = dev_name(dev); -+ -+ init.ops = desc->ops; -+ init.name = desc->name; -+ init.parent_names = desc->parent_names; -+ init.num_parents = desc->num_parents; -+ init.flags = 0; -+ -+ priv = devm_kzalloc(dev, sizeof(struct clk_aic32x4), GFP_KERNEL); -+ if (priv == NULL) -+ return (struct clk *) -ENOMEM; -+ -+ priv->dev = dev; -+ priv->hw.init = &init; -+ priv->regmap = dev_get_regmap(dev, NULL); -+ priv->reg = desc->reg; -+ -+ clk_hw_register_clkdev(&priv->hw, desc->name, devname); -+ return devm_clk_register(dev, &priv->hw); -+} -+ -+int aic32x4_register_clocks(struct device *dev, const char *mclk_name) -+{ -+ int i; -+ -+ /* -+ * These lines are here to preserve the current functionality of -+ * the driver with regard to the DT. These should eventually be set -+ * by DT nodes so that the connections can be set up in configuration -+ * rather than code. -+ */ -+ aic32x4_clkdesc_array[0].parent_names = -+ (const char* []) { mclk_name, "bclk", "gpio", "din" }; -+ -+ for (i = 0; i < ARRAY_SIZE(aic32x4_clkdesc_array); ++i) -+ aic32x4_register_clk(dev, &aic32x4_clkdesc_array[i]); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(aic32x4_register_clocks); ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -14,7 +14,7 @@ - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License -@@ -33,6 +33,7 @@ - #include - #include - #include -+#include - #include - - #include -@@ -49,9 +50,7 @@ - struct aic32x4_rate_divs { - u32 mclk; - u32 rate; -- u8 p_val; -- u8 pll_j; -- u16 pll_d; -+ unsigned long pll_rate; - u16 dosr; - u8 ndac; - u8 mdac; -@@ -71,6 +70,7 @@ struct aic32x4_priv { - bool swapdacs; - int rstn_gpio; - struct clk *mclk; -+ const char *mclk_name; - - struct regulator *supply_ldo; - struct regulator *supply_iov; -@@ -309,34 +309,34 @@ static const struct snd_kcontrol_new aic - - static const struct aic32x4_rate_divs aic32x4_divs[] = { - /* 8k rate */ -- {12000000, 8000, 1, 7, 6800, 768, 5, 3, 128, 5, 18, 24, 1, 1}, -- {24000000, 8000, 2, 7, 6800, 768, 15, 1, 64, 45, 4, 24, 1, 1}, -- {25000000, 8000, 2, 7, 3728, 768, 15, 1, 64, 45, 4, 24, 1, 1}, -+ { 12000000, 8000, 57120000, 768, 5, 3, 128, 5, 18, 24, 1, 1 }, -+ { 24000000, 8000, 57120000, 768, 15, 1, 64, 45, 4, 24, 1, 1 }, -+ { 25000000, 8000, 32620000, 768, 15, 1, 64, 45, 4, 24, 1, 1 }, - /* 11.025k rate */ -- {12000000, 11025, 1, 7, 5264, 512, 8, 2, 128, 8, 8, 16, 1, 1}, -- {24000000, 11025, 2, 7, 5264, 512, 16, 1, 64, 32, 4, 16, 1, 1}, -+ { 12000000, 11025, 44217600, 512, 8, 2, 128, 8, 8, 16, 1, 1 }, -+ { 24000000, 11025, 44217600, 512, 16, 1, 64, 32, 4, 16, 1, 1 }, - /* 16k rate */ -- {12000000, 16000, 1, 7, 6800, 384, 5, 3, 128, 5, 9, 12, 1, 1}, -- {24000000, 16000, 2, 7, 6800, 384, 15, 1, 64, 18, 5, 12, 1, 1}, -- {25000000, 16000, 2, 7, 3728, 384, 15, 1, 64, 18, 5, 12, 1, 1}, -+ { 12000000, 16000, 57120000, 384, 5, 3, 128, 5, 9, 12, 1, 1 }, -+ { 24000000, 16000, 57120000, 384, 15, 1, 64, 18, 5, 12, 1, 1 }, -+ { 25000000, 16000, 32620000, 384, 15, 1, 64, 18, 5, 12, 1, 1 }, - /* 22.05k rate */ -- {12000000, 22050, 1, 7, 5264, 256, 4, 4, 128, 4, 8, 8, 1, 1}, -- {24000000, 22050, 2, 7, 5264, 256, 16, 1, 64, 16, 4, 8, 1, 1}, -- {25000000, 22050, 2, 7, 2253, 256, 16, 1, 64, 16, 4, 8, 1, 1}, -+ { 12000000, 22050, 44217600, 256, 4, 4, 128, 4, 8, 8, 1, 1 }, -+ { 24000000, 22050, 44217600, 256, 16, 1, 64, 16, 4, 8, 1, 1 }, -+ { 25000000, 22050, 19713750, 256, 16, 1, 64, 16, 4, 8, 1, 1 }, - /* 32k rate */ -- {12000000, 32000, 1, 7, 1680, 192, 2, 7, 64, 2, 21, 6, 1, 1}, -- {24000000, 32000, 2, 7, 1680, 192, 7, 2, 64, 7, 6, 6, 1, 1}, -+ { 12000000, 32000, 14112000, 192, 2, 7, 64, 2, 21, 6, 1, 1 }, -+ { 24000000, 32000, 14112000, 192, 7, 2, 64, 7, 6, 6, 1, 1 }, - /* 44.1k rate */ -- {12000000, 44100, 1, 7, 5264, 128, 2, 8, 128, 2, 8, 4, 1, 1}, -- {24000000, 44100, 2, 7, 5264, 128, 8, 2, 64, 8, 4, 4, 1, 1}, -- {25000000, 44100, 2, 7, 2253, 128, 8, 2, 64, 8, 4, 4, 1, 1}, -+ { 12000000, 44100, 44217600, 128, 2, 8, 128, 2, 8, 4, 1, 1 }, -+ { 24000000, 44100, 44217600, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, -+ { 25000000, 44100, 19713750, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, - /* 48k rate */ -- {12000000, 48000, 1, 8, 1920, 128, 2, 8, 128, 2, 8, 4, 1, 1}, -- {24000000, 48000, 2, 8, 1920, 128, 8, 2, 64, 8, 4, 4, 1, 1}, -- {25000000, 48000, 2, 7, 8643, 128, 8, 2, 64, 8, 4, 4, 1, 1}, -+ { 12000000, 48000, 18432000, 128, 2, 8, 128, 2, 8, 4, 1, 1 }, -+ { 24000000, 48000, 18432000, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, -+ { 25000000, 48000, 75626250, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, - - /* 96k rate */ -- {25000000, 96000, 2, 7, 8643, 64, 4, 4, 64, 4, 4, 1, 1, 9}, -+ { 25000000, 96000, 75626250, 64, 4, 4, 64, 4, 4, 1, 1, 9 }, - }; - - static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { -@@ -393,7 +393,7 @@ static const struct snd_kcontrol_new in3 - SOC_DAPM_ENUM("IN3_R L- Switch", in3r_lpga_n_enum), - }; - --/* Right mixer pins */ -+/* Right mixer pins */ - static SOC_ENUM_SINGLE_DECL(in1r_rpga_p_enum, AIC32X4_RMICPGAPIN, 6, resistor_text); - static SOC_ENUM_SINGLE_DECL(in2r_rpga_p_enum, AIC32X4_RMICPGAPIN, 4, resistor_text); - static SOC_ENUM_SINGLE_DECL(in3r_rpga_p_enum, AIC32X4_RMICPGAPIN, 2, resistor_text); -@@ -597,7 +597,7 @@ static const struct snd_soc_dapm_route a - static const struct regmap_range_cfg aic32x4_regmap_pages[] = { - { - .selector_reg = 0, -- .selector_mask = 0xff, -+ .selector_mask = 0xff, - .window_start = 0, - .window_len = 128, - .range_min = 0, -@@ -618,7 +618,7 @@ static inline int aic32x4_get_divs(int m - - for (i = 0; i < ARRAY_SIZE(aic32x4_divs); i++) { - if ((aic32x4_divs[i].rate == rate) -- && (aic32x4_divs[i].mclk == mclk)) { -+ && (aic32x4_divs[i].mclk == mclk)) { - return i; - } - } -@@ -690,12 +690,12 @@ static int aic32x4_set_dai_fmt(struct sn - } - - snd_soc_component_update_bits(component, AIC32X4_IFACE1, -- AIC32X4_IFACE1_DATATYPE_MASK | -- AIC32X4_IFACE1_MASTER_MASK, iface_reg_1); -+ AIC32X4_IFACE1_DATATYPE_MASK | -+ AIC32X4_IFACE1_MASTER_MASK, iface_reg_1); - snd_soc_component_update_bits(component, AIC32X4_IFACE2, -- AIC32X4_DATA_OFFSET_MASK, iface_reg_2); -+ AIC32X4_DATA_OFFSET_MASK, iface_reg_2); - snd_soc_component_update_bits(component, AIC32X4_IFACE3, -- AIC32X4_BCLKINV_MASK, iface_reg_3); -+ AIC32X4_BCLKINV_MASK, iface_reg_3); - - return 0; - } -@@ -717,6 +717,11 @@ static int aic32x4_setup_clocks(struct s - unsigned int parent_rate) - { - int i; -+ int ret; -+ -+ struct clk_bulk_data clocks[] = { -+ { .id = "pll" }, -+ }; - - i = aic32x4_get_divs(parent_rate, sample_rate); - if (i < 0) { -@@ -724,39 +729,29 @@ static int aic32x4_setup_clocks(struct s - return i; - } - -+ ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); -+ if (ret) -+ return ret; -+ -+ clk_set_rate(clocks[0].clk, sample_rate); -+ - aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - -- /* MCLK as PLL_CLKIN */ -- snd_soc_component_update_bits(component, AIC32X4_CLKMUX, AIC32X4_PLL_CLKIN_MASK, -- AIC32X4_PLL_CLKIN_MCLK << AIC32X4_PLL_CLKIN_SHIFT); - /* PLL as CODEC_CLKIN */ -- snd_soc_component_update_bits(component, AIC32X4_CLKMUX, AIC32X4_CODEC_CLKIN_MASK, -- AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); -+ snd_soc_component_update_bits(component, AIC32X4_CLKMUX, -+ AIC32X4_CODEC_CLKIN_MASK, -+ AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); - /* DAC_MOD_CLK as BDIV_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_IFACE3, AIC32X4_BDIVCLK_MASK, -- AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); -- -- /* We will fix R value to 1 and will make P & J=K.D as variable */ -- snd_soc_component_update_bits(component, AIC32X4_PLLPR, AIC32X4_PLL_R_MASK, 0x01); -- -- /* PLL P value */ -- snd_soc_component_update_bits(component, AIC32X4_PLLPR, AIC32X4_PLL_P_MASK, -- aic32x4_divs[i].p_val << AIC32X4_PLL_P_SHIFT); -- -- /* PLL J value */ -- snd_soc_component_write(component, AIC32X4_PLLJ, aic32x4_divs[i].pll_j); -- -- /* PLL D value */ -- snd_soc_component_write(component, AIC32X4_PLLDMSB, (aic32x4_divs[i].pll_d >> 8)); -- snd_soc_component_write(component, AIC32X4_PLLDLSB, (aic32x4_divs[i].pll_d & 0xff)); -+ AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); - - /* NDAC divider value */ - snd_soc_component_update_bits(component, AIC32X4_NDAC, -- AIC32X4_NDAC_MASK, aic32x4_divs[i].ndac); -+ AIC32X4_NDAC_MASK, aic32x4_divs[i].ndac); - - /* MDAC divider value */ - snd_soc_component_update_bits(component, AIC32X4_MDAC, -- AIC32X4_MDAC_MASK, aic32x4_divs[i].mdac); -+ AIC32X4_MDAC_MASK, aic32x4_divs[i].mdac); - - /* DOSR MSB & LSB values */ - snd_soc_component_write(component, AIC32X4_DOSRMSB, aic32x4_divs[i].dosr >> 8); -@@ -764,18 +759,18 @@ static int aic32x4_setup_clocks(struct s - - /* NADC divider value */ - snd_soc_component_update_bits(component, AIC32X4_NADC, -- AIC32X4_NADC_MASK, aic32x4_divs[i].nadc); -+ AIC32X4_NADC_MASK, aic32x4_divs[i].nadc); - - /* MADC divider value */ - snd_soc_component_update_bits(component, AIC32X4_MADC, -- AIC32X4_MADC_MASK, aic32x4_divs[i].madc); -+ AIC32X4_MADC_MASK, aic32x4_divs[i].madc); - - /* AOSR value */ - snd_soc_component_write(component, AIC32X4_AOSR, aic32x4_divs[i].aosr); - - /* BCLK N divider */ - snd_soc_component_update_bits(component, AIC32X4_BCLKN, -- AIC32X4_BCLK_MASK, aic32x4_divs[i].blck_N); -+ AIC32X4_BCLK_MASK, aic32x4_divs[i].blck_N); - - return 0; - } -@@ -794,23 +789,23 @@ static int aic32x4_hw_params(struct snd_ - switch (params_width(params)) { - case 16: - iface1_reg |= (AIC32X4_WORD_LEN_16BITS << -- AIC32X4_IFACE1_DATALEN_SHIFT); -+ AIC32X4_IFACE1_DATALEN_SHIFT); - break; - case 20: - iface1_reg |= (AIC32X4_WORD_LEN_20BITS << -- AIC32X4_IFACE1_DATALEN_SHIFT); -+ AIC32X4_IFACE1_DATALEN_SHIFT); - break; - case 24: - iface1_reg |= (AIC32X4_WORD_LEN_24BITS << -- AIC32X4_IFACE1_DATALEN_SHIFT); -+ AIC32X4_IFACE1_DATALEN_SHIFT); - break; - case 32: - iface1_reg |= (AIC32X4_WORD_LEN_32BITS << -- AIC32X4_IFACE1_DATALEN_SHIFT); -+ AIC32X4_IFACE1_DATALEN_SHIFT); - break; - } - snd_soc_component_update_bits(component, AIC32X4_IFACE1, -- AIC32X4_IFACE1_DATALEN_MASK, iface1_reg); -+ AIC32X4_IFACE1_DATALEN_MASK, iface1_reg); - - if (params_channels(params) == 1) { - dacsetup_reg = AIC32X4_RDAC2LCHN | AIC32X4_LDAC2LCHN; -@@ -821,7 +816,7 @@ static int aic32x4_hw_params(struct snd_ - dacsetup_reg = AIC32X4_LDAC2LCHN | AIC32X4_RDAC2RCHN; - } - snd_soc_component_update_bits(component, AIC32X4_DACSETUP, -- AIC32X4_DAC_CHAN_MASK, dacsetup_reg); -+ AIC32X4_DAC_CHAN_MASK, dacsetup_reg); - - return 0; - } -@@ -831,7 +826,7 @@ static int aic32x4_mute(struct snd_soc_d - struct snd_soc_component *component = dai->component; - - snd_soc_component_update_bits(component, AIC32X4_DACMUTE, -- AIC32X4_MUTEON, mute ? AIC32X4_MUTEON : 0); -+ AIC32X4_MUTEON, mute ? AIC32X4_MUTEON : 0); - - return 0; - } -@@ -853,27 +848,27 @@ static int aic32x4_set_bias_level(struct - - /* Switch on PLL */ - snd_soc_component_update_bits(component, AIC32X4_PLLPR, -- AIC32X4_PLLEN, AIC32X4_PLLEN); -+ AIC32X4_PLLEN, AIC32X4_PLLEN); - - /* Switch on NDAC Divider */ - snd_soc_component_update_bits(component, AIC32X4_NDAC, -- AIC32X4_NDACEN, AIC32X4_NDACEN); -+ AIC32X4_NDACEN, AIC32X4_NDACEN); - - /* Switch on MDAC Divider */ - snd_soc_component_update_bits(component, AIC32X4_MDAC, -- AIC32X4_MDACEN, AIC32X4_MDACEN); -+ AIC32X4_MDACEN, AIC32X4_MDACEN); - - /* Switch on NADC Divider */ - snd_soc_component_update_bits(component, AIC32X4_NADC, -- AIC32X4_NADCEN, AIC32X4_NADCEN); -+ AIC32X4_NADCEN, AIC32X4_NADCEN); - - /* Switch on MADC Divider */ - snd_soc_component_update_bits(component, AIC32X4_MADC, -- AIC32X4_MADCEN, AIC32X4_MADCEN); -+ AIC32X4_MADCEN, AIC32X4_MADCEN); - - /* Switch on BCLK_N Divider */ - snd_soc_component_update_bits(component, AIC32X4_BCLKN, -- AIC32X4_BCLKEN, AIC32X4_BCLKEN); -+ AIC32X4_BCLKEN, AIC32X4_BCLKEN); - break; - case SND_SOC_BIAS_PREPARE: - break; -@@ -884,27 +879,27 @@ static int aic32x4_set_bias_level(struct - - /* Switch off BCLK_N Divider */ - snd_soc_component_update_bits(component, AIC32X4_BCLKN, -- AIC32X4_BCLKEN, 0); -+ AIC32X4_BCLKEN, 0); - - /* Switch off MADC Divider */ - snd_soc_component_update_bits(component, AIC32X4_MADC, -- AIC32X4_MADCEN, 0); -+ AIC32X4_MADCEN, 0); - - /* Switch off NADC Divider */ - snd_soc_component_update_bits(component, AIC32X4_NADC, -- AIC32X4_NADCEN, 0); -+ AIC32X4_NADCEN, 0); - - /* Switch off MDAC Divider */ - snd_soc_component_update_bits(component, AIC32X4_MDAC, -- AIC32X4_MDACEN, 0); -+ AIC32X4_MDACEN, 0); - - /* Switch off NDAC Divider */ - snd_soc_component_update_bits(component, AIC32X4_NDAC, -- AIC32X4_NDACEN, 0); -+ AIC32X4_NDACEN, 0); - - /* Switch off PLL */ - snd_soc_component_update_bits(component, AIC32X4_PLLPR, -- AIC32X4_PLLEN, 0); -+ AIC32X4_PLLEN, 0); - - /* Switch off master clock */ - clk_disable_unprepare(aic32x4->mclk); -@@ -916,7 +911,7 @@ static int aic32x4_set_bias_level(struct - } - - #define AIC32X4_RATES SNDRV_PCM_RATE_8000_96000 --#define AIC32X4_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \ -+#define AIC32X4_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \ - | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) - - static const struct snd_soc_dai_ops aic32x4_ops = { -@@ -929,17 +924,17 @@ static const struct snd_soc_dai_ops aic3 - static struct snd_soc_dai_driver aic32x4_dai = { - .name = "tlv320aic32x4-hifi", - .playback = { -- .stream_name = "Playback", -- .channels_min = 1, -- .channels_max = 2, -- .rates = AIC32X4_RATES, -- .formats = AIC32X4_FORMATS,}, -+ .stream_name = "Playback", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rates = AIC32X4_RATES, -+ .formats = AIC32X4_FORMATS,}, - .capture = { -- .stream_name = "Capture", -- .channels_min = 1, -- .channels_max = 2, -- .rates = AIC32X4_RATES, -- .formats = AIC32X4_FORMATS,}, -+ .stream_name = "Capture", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rates = AIC32X4_RATES, -+ .formats = AIC32X4_FORMATS,}, - .ops = &aic32x4_ops, - .symmetric_rates = 1, - }; -@@ -952,7 +947,7 @@ static void aic32x4_setup_gpios(struct s - /* MFP1 */ - if (aic32x4->setup->gpio_func[0] != AIC32X4_MFPX_DEFAULT_VALUE) { - snd_soc_component_write(component, AIC32X4_DINCTL, -- aic32x4->setup->gpio_func[0]); -+ aic32x4->setup->gpio_func[0]); - snd_soc_add_component_controls(component, aic32x4_mfp1, - ARRAY_SIZE(aic32x4_mfp1)); - } -@@ -960,7 +955,7 @@ static void aic32x4_setup_gpios(struct s - /* MFP2 */ - if (aic32x4->setup->gpio_func[1] != AIC32X4_MFPX_DEFAULT_VALUE) { - snd_soc_component_write(component, AIC32X4_DOUTCTL, -- aic32x4->setup->gpio_func[1]); -+ aic32x4->setup->gpio_func[1]); - snd_soc_add_component_controls(component, aic32x4_mfp2, - ARRAY_SIZE(aic32x4_mfp2)); - } -@@ -968,7 +963,7 @@ static void aic32x4_setup_gpios(struct s - /* MFP3 */ - if (aic32x4->setup->gpio_func[2] != AIC32X4_MFPX_DEFAULT_VALUE) { - snd_soc_component_write(component, AIC32X4_SCLKCTL, -- aic32x4->setup->gpio_func[2]); -+ aic32x4->setup->gpio_func[2]); - snd_soc_add_component_controls(component, aic32x4_mfp3, - ARRAY_SIZE(aic32x4_mfp3)); - } -@@ -976,7 +971,7 @@ static void aic32x4_setup_gpios(struct s - /* MFP4 */ - if (aic32x4->setup->gpio_func[3] != AIC32X4_MFPX_DEFAULT_VALUE) { - snd_soc_component_write(component, AIC32X4_MISOCTL, -- aic32x4->setup->gpio_func[3]); -+ aic32x4->setup->gpio_func[3]); - snd_soc_add_component_controls(component, aic32x4_mfp4, - ARRAY_SIZE(aic32x4_mfp4)); - } -@@ -984,7 +979,7 @@ static void aic32x4_setup_gpios(struct s - /* MFP5 */ - if (aic32x4->setup->gpio_func[4] != AIC32X4_MFPX_DEFAULT_VALUE) { - snd_soc_component_write(component, AIC32X4_GPIOCTL, -- aic32x4->setup->gpio_func[4]); -+ aic32x4->setup->gpio_func[4]); - snd_soc_add_component_controls(component, aic32x4_mfp5, - ARRAY_SIZE(aic32x4_mfp5)); - } -@@ -1007,8 +1002,8 @@ static int aic32x4_component_probe(struc - - /* Power platform configuration */ - if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { -- snd_soc_component_write(component, AIC32X4_MICBIAS, AIC32X4_MICBIAS_LDOIN | -- AIC32X4_MICBIAS_2075V); -+ snd_soc_component_write(component, AIC32X4_MICBIAS, -+ AIC32X4_MICBIAS_LDOIN | AIC32X4_MICBIAS_2075V); - } - if (aic32x4->power_cfg & AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE) - snd_soc_component_write(component, AIC32X4_PWRCFG, AIC32X4_AVDDWEAKDISABLE); -@@ -1071,12 +1066,18 @@ static int aic32x4_parse_dt(struct aic32 - struct device_node *np) - { - struct aic32x4_setup_data *aic32x4_setup; -+ int ret; - - aic32x4_setup = devm_kzalloc(aic32x4->dev, sizeof(*aic32x4_setup), - GFP_KERNEL); - if (!aic32x4_setup) - return -ENOMEM; - -+ ret = of_property_match_string(np, "clock-names", "mclk"); -+ if (ret < 0) -+ return -EINVAL; -+ aic32x4->mclk_name = of_clk_get_parent_name(np, ret); -+ - aic32x4->swapdacs = false; - aic32x4->micpga_routing = 0; - aic32x4->rstn_gpio = of_get_named_gpio(np, "reset-gpios", 0); -@@ -1198,7 +1199,7 @@ int aic32x4_probe(struct device *dev, st - return PTR_ERR(regmap); - - aic32x4 = devm_kzalloc(dev, sizeof(struct aic32x4_priv), -- GFP_KERNEL); -+ GFP_KERNEL); - if (aic32x4 == NULL) - return -ENOMEM; - -@@ -1210,6 +1211,7 @@ int aic32x4_probe(struct device *dev, st - aic32x4->swapdacs = pdata->swapdacs; - aic32x4->micpga_routing = pdata->micpga_routing; - aic32x4->rstn_gpio = pdata->rstn_gpio; -+ aic32x4->mclk_name = "mclk"; - } else if (np) { - ret = aic32x4_parse_dt(aic32x4, np); - if (ret) { -@@ -1221,6 +1223,7 @@ int aic32x4_probe(struct device *dev, st - aic32x4->swapdacs = false; - aic32x4->micpga_routing = 0; - aic32x4->rstn_gpio = -1; -+ aic32x4->mclk_name = "mclk"; - } - - aic32x4->mclk = devm_clk_get(dev, "mclk"); -@@ -1229,6 +1232,10 @@ int aic32x4_probe(struct device *dev, st - return PTR_ERR(aic32x4->mclk); - } - -+ ret = aic32x4_register_clocks(dev, aic32x4->mclk_name); -+ if (ret) -+ return ret; -+ - if (gpio_is_valid(aic32x4->rstn_gpio)) { - ret = devm_gpio_request_one(dev, aic32x4->rstn_gpio, - GPIOF_OUT_INIT_LOW, "tlv320aic32x4 rstn"); ---- a/sound/soc/codecs/tlv320aic32x4.h -+++ b/sound/soc/codecs/tlv320aic32x4.h -@@ -16,6 +16,7 @@ struct regmap_config; - extern const struct regmap_config aic32x4_regmap_config; - int aic32x4_probe(struct device *dev, struct regmap *regmap); - int aic32x4_remove(struct device *dev); -+int aic32x4_register_clocks(struct device *dev, const char *mclk_name); - - /* tlv320aic32x4 register space (in decimal to match datasheet) */ - -@@ -205,4 +206,8 @@ int aic32x4_remove(struct device *dev); - #define AIC32X4_RMICPGANIN_IN1L_10K 0x10 - #define AIC32X4_RMICPGANIN_CM1R_10K 0x40 - -+/* Clock Limits */ -+#define AIC32X4_MAX_PLL_CLKIN 20000000 -+ -+ - #endif /* _TLV320AIC32X4_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0399-staging-bcm2835-audio-Fix-incorrect-draining-handlin.patch b/target/linux/brcm2708/patches-4.19/950-0399-staging-bcm2835-audio-Fix-incorrect-draining-handlin.patch new file mode 100644 index 0000000000..fe308694d7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0399-staging-bcm2835-audio-Fix-incorrect-draining-handlin.patch @@ -0,0 +1,69 @@ +From e5414b543a330c64b2e0b5e96d604cf580c2b9b7 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:38 +0200 +Subject: [PATCH] staging: bcm2835-audio: Fix incorrect draining + handling + +commit 7d2a91f5f1bcf08ca257bcf1ed9721fcd341f834 upstream. + +The handling of SNDRV_PCM_TRIGGER_STOP at the trigger callback is +incorrect: when the STOP is issued, the driver is supposed to drop the +stream immediately. Meanwhile bcm2835 driver checks the DRAINING +state and tries to issue some different command. + +This patch straightens things a bit, dropping the incorrect state +checks. The draining behavior would be still not perfect at this +point, but will be improved in a later patch. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 18 ++++++------------ + 1 file changed, 6 insertions(+), 12 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -153,7 +153,6 @@ static int snd_bcm2835_playback_open_gen + chip->alsa_stream[idx] = alsa_stream; + + chip->opened |= (1 << idx); +- alsa_stream->draining = 1; + + out: + mutex_unlock(&chip->audio_mutex); +@@ -268,6 +267,7 @@ static int snd_bcm2835_pcm_prepare(struc + alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); + alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); + alsa_stream->pos = 0; ++ alsa_stream->draining = false; + + audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", + alsa_stream->buffer_size, alsa_stream->period_size, +@@ -312,21 +312,15 @@ static int snd_bcm2835_pcm_trigger(struc + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + err = bcm2835_audio_start(alsa_stream); +- if (!err) +- alsa_stream->draining = 1; +- else ++ if (err) + audio_error(" Failed to START alsa device (%d)\n", err); + break; ++ case SNDRV_PCM_TRIGGER_DRAIN: ++ alsa_stream->draining = true; ++ break; + case SNDRV_PCM_TRIGGER_STOP: +- if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) { +- audio_info("DRAINING\n"); +- alsa_stream->draining = 1; +- } else { +- audio_info("DROPPING\n"); +- alsa_stream->draining = 0; +- } + err = bcm2835_audio_stop(alsa_stream); +- if (err != 0) ++ if (err) + audio_error(" Failed to STOP alsa device (%d)\n", err); + break; + default: diff --git a/target/linux/brcm2708/patches-4.19/950-0400-ASoC-tlv320aic32x4-Model-CODEC_CLKIN-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0400-ASoC-tlv320aic32x4-Model-CODEC_CLKIN-in-CCF.patch deleted file mode 100644 index 3074140a6d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0400-ASoC-tlv320aic32x4-Model-CODEC_CLKIN-in-CCF.patch +++ /dev/null @@ -1,120 +0,0 @@ -From c5f9d78ec34de15732bcbff52bedba7a840e42b2 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:46 -0700 -Subject: [PATCH 400/806] ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF - -commit fd2df3aeafa4b4cc468d58e147e0822967034b71 upstream. - -Model and manage codec clock input as a component in the Core -Clock Framework. This should allow us to do some more complex -clock management and power control. Also, some of the -on-board chip clocks can be exposed to the outside, and this -change will make those clocks easier to consume by other -parts of the kernel. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4-clk.c | 34 ++++++++++++++++++++++++++++ - sound/soc/codecs/tlv320aic32x4.c | 18 +++++++++++---- - 2 files changed, 47 insertions(+), 5 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4-clk.c -+++ b/sound/soc/codecs/tlv320aic32x4-clk.c -@@ -265,6 +265,30 @@ static const struct clk_ops aic32x4_pll_ - .get_parent = clk_aic32x4_pll_get_parent, - }; - -+static int clk_aic32x4_codec_clkin_set_parent(struct clk_hw *hw, u8 index) -+{ -+ struct clk_aic32x4 *mux = to_clk_aic32x4(hw); -+ -+ return regmap_update_bits(mux->regmap, -+ AIC32X4_CLKMUX, -+ AIC32X4_CODEC_CLKIN_MASK, index << AIC32X4_CODEC_CLKIN_SHIFT); -+} -+ -+static u8 clk_aic32x4_codec_clkin_get_parent(struct clk_hw *hw) -+{ -+ struct clk_aic32x4 *mux = to_clk_aic32x4(hw); -+ unsigned int val; -+ -+ regmap_read(mux->regmap, AIC32X4_CLKMUX, &val); -+ -+ return (val & AIC32X4_CODEC_CLKIN_MASK) >> AIC32X4_CODEC_CLKIN_SHIFT; -+} -+ -+static const struct clk_ops aic32x4_codec_clkin_ops = { -+ .set_parent = clk_aic32x4_codec_clkin_set_parent, -+ .get_parent = clk_aic32x4_codec_clkin_get_parent, -+}; -+ - static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { - { - .name = "pll", -@@ -274,6 +298,14 @@ static struct aic32x4_clkdesc aic32x4_cl - .ops = &aic32x4_pll_ops, - .reg = 0, - }, -+ { -+ .name = "codec_clkin", -+ .parent_names = -+ (const char *[]) { "mclk", "bclk", "gpio", "pll" }, -+ .num_parents = 4, -+ .ops = &aic32x4_codec_clkin_ops, -+ .reg = 0, -+ }, - }; - - static struct clk *aic32x4_register_clk(struct device *dev, -@@ -314,6 +346,8 @@ int aic32x4_register_clocks(struct devic - */ - aic32x4_clkdesc_array[0].parent_names = - (const char* []) { mclk_name, "bclk", "gpio", "din" }; -+ aic32x4_clkdesc_array[1].parent_names = -+ (const char *[]) { mclk_name, "bclk", "gpio", "pll" }; - - for (i = 0; i < ARRAY_SIZE(aic32x4_clkdesc_array); ++i) - aic32x4_register_clk(dev, &aic32x4_clkdesc_array[i]); ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -737,12 +737,9 @@ static int aic32x4_setup_clocks(struct s - - aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - -- /* PLL as CODEC_CLKIN */ -- snd_soc_component_update_bits(component, AIC32X4_CLKMUX, -- AIC32X4_CODEC_CLKIN_MASK, -- AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); - /* DAC_MOD_CLK as BDIV_CLKIN */ -- snd_soc_component_update_bits(component, AIC32X4_IFACE3, AIC32X4_BDIVCLK_MASK, -+ snd_soc_component_update_bits(component, AIC32X4_IFACE3, -+ AIC32X4_BDIVCLK_MASK, - AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); - - /* NDAC divider value */ -@@ -989,6 +986,15 @@ static int aic32x4_component_probe(struc - { - struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); - u32 tmp_reg; -+ int ret; -+ -+ struct clk_bulk_data clocks[] = { -+ { .id = "codec_clkin" }, -+ }; -+ -+ ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); -+ if (ret) -+ return ret; - - if (gpio_is_valid(aic32x4->rstn_gpio)) { - ndelay(10); -@@ -1000,6 +1006,8 @@ static int aic32x4_component_probe(struc - if (aic32x4->setup) - aic32x4_setup_gpios(component); - -+ clk_set_parent(clocks[0].clk, clocks[1].clk); -+ - /* Power platform configuration */ - if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { - snd_soc_component_write(component, AIC32X4_MICBIAS, diff --git a/target/linux/brcm2708/patches-4.19/950-0400-staging-bcm2835-audio-Kill-unused-spinlock.patch b/target/linux/brcm2708/patches-4.19/950-0400-staging-bcm2835-audio-Kill-unused-spinlock.patch new file mode 100644 index 0000000000..f337c61b4b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0400-staging-bcm2835-audio-Kill-unused-spinlock.patch @@ -0,0 +1,39 @@ +From d9aef1329c29c20d8e0db9929a3235bfb1d718d3 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:39 +0200 +Subject: [PATCH] staging: bcm2835-audio: Kill unused spinlock + +commit 5332f6f012c0bf3a45c77dbc0f79814443a884d4 upstream. + +The alsa_stream->lock is never used. Kill it. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 -- + drivers/staging/vc04_services/bcm2835-audio/bcm2835.h | 2 -- + 2 files changed, 4 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -128,8 +128,6 @@ static int snd_bcm2835_playback_open_gen + alsa_stream->substream = substream; + alsa_stream->idx = idx; + +- spin_lock_init(&alsa_stream->lock); +- + err = bcm2835_audio_open(alsa_stream); + if (err) { + kfree(alsa_stream); +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -119,8 +119,6 @@ struct bcm2835_alsa_stream { + struct snd_pcm_substream *substream; + struct snd_pcm_indirect pcm_indirect; + +- spinlock_t lock; +- + int draining; + + int channels; diff --git a/target/linux/brcm2708/patches-4.19/950-0401-ASoC-tlv320aic32x4-Model-DAC-ADC-dividers-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0401-ASoC-tlv320aic32x4-Model-DAC-ADC-dividers-in-CCF.patch deleted file mode 100644 index 6d9069323f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0401-ASoC-tlv320aic32x4-Model-DAC-ADC-dividers-in-CCF.patch +++ /dev/null @@ -1,306 +0,0 @@ -From 3bf2e5984ab7acb4469ab0f3dfee8b7392001bbf Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:47 -0700 -Subject: [PATCH 401/806] ASoC: tlv320aic32x4: Model DAC/ADC dividers in CCF - -commit a51b50062091619915c5155085bbe13a7aca6903 upstream. - -Model and manage DAC/ADC dividers as components in the Core -Clock Framework. This should allow us to do some more complex -clock management and power control. Also, some of the -on-board chip clocks can be exposed to the outside, and this -change will make those clocks easier to consume by other -parts of the kernel. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4-clk.c | 90 ++++++++++++++++++++++++ - sound/soc/codecs/tlv320aic32x4.c | 101 +++++++++++++++------------ - sound/soc/codecs/tlv320aic32x4.h | 4 ++ - 3 files changed, 151 insertions(+), 44 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4-clk.c -+++ b/sound/soc/codecs/tlv320aic32x4-clk.c -@@ -289,6 +289,68 @@ static const struct clk_ops aic32x4_code - .get_parent = clk_aic32x4_codec_clkin_get_parent, - }; - -+static int clk_aic32x4_div_prepare(struct clk_hw *hw) -+{ -+ struct clk_aic32x4 *div = to_clk_aic32x4(hw); -+ -+ return regmap_update_bits(div->regmap, div->reg, -+ AIC32X4_DIVEN, AIC32X4_DIVEN); -+} -+ -+static void clk_aic32x4_div_unprepare(struct clk_hw *hw) -+{ -+ struct clk_aic32x4 *div = to_clk_aic32x4(hw); -+ -+ regmap_update_bits(div->regmap, div->reg, -+ AIC32X4_DIVEN, 0); -+} -+ -+static int clk_aic32x4_div_set_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct clk_aic32x4 *div = to_clk_aic32x4(hw); -+ u8 divisor; -+ -+ divisor = DIV_ROUND_UP(parent_rate, rate); -+ if (divisor > 128) -+ return -EINVAL; -+ -+ return regmap_update_bits(div->regmap, div->reg, -+ AIC32X4_DIV_MASK, divisor); -+} -+ -+static long clk_aic32x4_div_round_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ unsigned long divisor; -+ -+ divisor = DIV_ROUND_UP(*parent_rate, rate); -+ if (divisor > 128) -+ return -EINVAL; -+ -+ return DIV_ROUND_UP(*parent_rate, divisor); -+} -+ -+static unsigned long clk_aic32x4_div_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct clk_aic32x4 *div = to_clk_aic32x4(hw); -+ -+ unsigned int val; -+ -+ regmap_read(div->regmap, div->reg, &val); -+ -+ return DIV_ROUND_UP(parent_rate, val & AIC32X4_DIV_MASK); -+} -+ -+static const struct clk_ops aic32x4_div_ops = { -+ .prepare = clk_aic32x4_div_prepare, -+ .unprepare = clk_aic32x4_div_unprepare, -+ .set_rate = clk_aic32x4_div_set_rate, -+ .round_rate = clk_aic32x4_div_round_rate, -+ .recalc_rate = clk_aic32x4_div_recalc_rate, -+}; -+ - static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { - { - .name = "pll", -@@ -306,6 +368,34 @@ static struct aic32x4_clkdesc aic32x4_cl - .ops = &aic32x4_codec_clkin_ops, - .reg = 0, - }, -+ { -+ .name = "ndac", -+ .parent_names = (const char * []) { "codec_clkin" }, -+ .num_parents = 1, -+ .ops = &aic32x4_div_ops, -+ .reg = AIC32X4_NDAC, -+ }, -+ { -+ .name = "mdac", -+ .parent_names = (const char * []) { "ndac" }, -+ .num_parents = 1, -+ .ops = &aic32x4_div_ops, -+ .reg = AIC32X4_MDAC, -+ }, -+ { -+ .name = "nadc", -+ .parent_names = (const char * []) { "codec_clkin" }, -+ .num_parents = 1, -+ .ops = &aic32x4_div_ops, -+ .reg = AIC32X4_NADC, -+ }, -+ { -+ .name = "madc", -+ .parent_names = (const char * []) { "nadc" }, -+ .num_parents = 1, -+ .ops = &aic32x4_div_ops, -+ .reg = AIC32X4_MADC, -+ }, - }; - - static struct clk *aic32x4_register_clk(struct device *dev, ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -52,11 +52,11 @@ struct aic32x4_rate_divs { - u32 rate; - unsigned long pll_rate; - u16 dosr; -- u8 ndac; -- u8 mdac; -+ unsigned long ndac_rate; -+ unsigned long mdac_rate; - u8 aosr; -- u8 nadc; -- u8 madc; -+ unsigned long nadc_rate; -+ unsigned long madc_rate; - u8 blck_N; - u8 r_block; - u8 p_block; -@@ -309,34 +309,54 @@ static const struct snd_kcontrol_new aic - - static const struct aic32x4_rate_divs aic32x4_divs[] = { - /* 8k rate */ -- { 12000000, 8000, 57120000, 768, 5, 3, 128, 5, 18, 24, 1, 1 }, -- { 24000000, 8000, 57120000, 768, 15, 1, 64, 45, 4, 24, 1, 1 }, -- { 25000000, 8000, 32620000, 768, 15, 1, 64, 45, 4, 24, 1, 1 }, -+ { 12000000, 8000, 57120000, 768, 18432000, 6144000, 128, 18432000, -+ 1024000, 24, 1, 1 }, -+ { 24000000, 8000, 57120000, 768, 6144000, 6144000, 64, 2048000, -+ 512000, 24, 1, 1 }, -+ { 25000000, 8000, 32620000, 768, 6144000, 6144000, 64, 2048000, -+ 512000, 24, 1, 1 }, - /* 11.025k rate */ -- { 12000000, 11025, 44217600, 512, 8, 2, 128, 8, 8, 16, 1, 1 }, -- { 24000000, 11025, 44217600, 512, 16, 1, 64, 32, 4, 16, 1, 1 }, -+ { 12000000, 11025, 44217600, 512, 11289600, 5644800, 128, 11289600, -+ 1411200, 16, 1, 1 }, -+ { 24000000, 11025, 44217600, 512, 5644800, 5644800, 64, 2822400, -+ 705600, 16, 1, 1 }, - /* 16k rate */ -- { 12000000, 16000, 57120000, 384, 5, 3, 128, 5, 9, 12, 1, 1 }, -- { 24000000, 16000, 57120000, 384, 15, 1, 64, 18, 5, 12, 1, 1 }, -- { 25000000, 16000, 32620000, 384, 15, 1, 64, 18, 5, 12, 1, 1 }, -+ { 12000000, 16000, 57120000, 384, 18432000, 6144000, 128, 18432000, -+ 2048000, 12, 1, 1 }, -+ { 24000000, 16000, 57120000, 384, 6144000, 6144000, 64, 5120000, -+ 1024000, 12, 1, 1 }, -+ { 25000000, 16000, 32620000, 384, 6144000, 6144000, 64, 5120000, -+ 1024000, 12, 1, 1 }, - /* 22.05k rate */ -- { 12000000, 22050, 44217600, 256, 4, 4, 128, 4, 8, 8, 1, 1 }, -- { 24000000, 22050, 44217600, 256, 16, 1, 64, 16, 4, 8, 1, 1 }, -- { 25000000, 22050, 19713750, 256, 16, 1, 64, 16, 4, 8, 1, 1 }, -+ { 12000000, 22050, 44217600, 256, 22579200, 5644800, 128, 22579200, -+ 2822400, 8, 1, 1 }, -+ { 24000000, 22050, 44217600, 256, 5644800, 5644800, 64, 5644800, -+ 1411200, 8, 1, 1 }, -+ { 25000000, 22050, 19713750, 256, 5644800, 5644800, 64, 5644800, -+ 1411200, 8, 1, 1 }, - /* 32k rate */ -- { 12000000, 32000, 14112000, 192, 2, 7, 64, 2, 21, 6, 1, 1 }, -- { 24000000, 32000, 14112000, 192, 7, 2, 64, 7, 6, 6, 1, 1 }, -+ { 12000000, 32000, 14112000, 192, 43008000, 6144000, 64, 43008000, -+ 2048000, 6, 1, 1 }, -+ { 24000000, 32000, 14112000, 192, 12288000, 6144000, 64, 12288000, -+ 2048000, 6, 1, 1 }, - /* 44.1k rate */ -- { 12000000, 44100, 44217600, 128, 2, 8, 128, 2, 8, 4, 1, 1 }, -- { 24000000, 44100, 44217600, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, -- { 25000000, 44100, 19713750, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, -+ { 12000000, 44100, 44217600, 128, 45158400, 5644800, 128, 45158400, -+ 5644800, 4, 1, 1 }, -+ { 24000000, 44100, 44217600, 128, 11289600, 5644800, 64, 11289600, -+ 2822400, 4, 1, 1 }, -+ { 25000000, 44100, 19713750, 128, 11289600, 5644800, 64, 11289600, -+ 2822400, 4, 1, 1 }, - /* 48k rate */ -- { 12000000, 48000, 18432000, 128, 2, 8, 128, 2, 8, 4, 1, 1 }, -- { 24000000, 48000, 18432000, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, -- { 25000000, 48000, 75626250, 128, 8, 2, 64, 8, 4, 4, 1, 1 }, -+ { 12000000, 48000, 18432000, 128, 49152000, 6144000, 128, 49152000, -+ 6144000, 4, 1, 1 }, -+ { 24000000, 48000, 18432000, 128, 12288000, 6144000, 64, 12288000, -+ 3072000, 4, 1, 1 }, -+ { 25000000, 48000, 75626250, 128, 12288000, 6144000, 64, 12288000, -+ 3072000, 4, 1, 1 }, - - /* 96k rate */ -- { 25000000, 96000, 75626250, 64, 4, 4, 64, 4, 4, 1, 1, 9 }, -+ { 25000000, 96000, 75626250, 64, 24576000, 6144000, 64, 24576000, -+ 6144000, 1, 1, 9 }, - }; - - static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { -@@ -721,6 +741,10 @@ static int aic32x4_setup_clocks(struct s - - struct clk_bulk_data clocks[] = { - { .id = "pll" }, -+ { .id = "nadc" }, -+ { .id = "madc" }, -+ { .id = "ndac" }, -+ { .id = "mdac" }, - }; - - i = aic32x4_get_divs(parent_rate, sample_rate); -@@ -733,7 +757,11 @@ static int aic32x4_setup_clocks(struct s - if (ret) - return ret; - -- clk_set_rate(clocks[0].clk, sample_rate); -+ clk_set_rate(clocks[0].clk, aic32x4_divs[i].pll_rate); -+ clk_set_rate(clocks[1].clk, aic32x4_divs[i].nadc_rate); -+ clk_set_rate(clocks[2].clk, aic32x4_divs[i].madc_rate); -+ clk_set_rate(clocks[3].clk, aic32x4_divs[i].ndac_rate); -+ clk_set_rate(clocks[4].clk, aic32x4_divs[i].mdac_rate); - - aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - -@@ -742,26 +770,10 @@ static int aic32x4_setup_clocks(struct s - AIC32X4_BDIVCLK_MASK, - AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); - -- /* NDAC divider value */ -- snd_soc_component_update_bits(component, AIC32X4_NDAC, -- AIC32X4_NDAC_MASK, aic32x4_divs[i].ndac); -- -- /* MDAC divider value */ -- snd_soc_component_update_bits(component, AIC32X4_MDAC, -- AIC32X4_MDAC_MASK, aic32x4_divs[i].mdac); -- - /* DOSR MSB & LSB values */ - snd_soc_component_write(component, AIC32X4_DOSRMSB, aic32x4_divs[i].dosr >> 8); - snd_soc_component_write(component, AIC32X4_DOSRLSB, (aic32x4_divs[i].dosr & 0xff)); - -- /* NADC divider value */ -- snd_soc_component_update_bits(component, AIC32X4_NADC, -- AIC32X4_NADC_MASK, aic32x4_divs[i].nadc); -- -- /* MADC divider value */ -- snd_soc_component_update_bits(component, AIC32X4_MADC, -- AIC32X4_MADC_MASK, aic32x4_divs[i].madc); -- - /* AOSR value */ - snd_soc_component_write(component, AIC32X4_AOSR, aic32x4_divs[i].aosr); - -@@ -773,8 +785,8 @@ static int aic32x4_setup_clocks(struct s - } - - static int aic32x4_hw_params(struct snd_pcm_substream *substream, -- struct snd_pcm_hw_params *params, -- struct snd_soc_dai *dai) -+ struct snd_pcm_hw_params *params, -+ struct snd_soc_dai *dai) - { - struct snd_soc_component *component = dai->component; - struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); -@@ -989,7 +1001,8 @@ static int aic32x4_component_probe(struc - int ret; - - struct clk_bulk_data clocks[] = { -- { .id = "codec_clkin" }, -+ { .id = "codec_clkin" }, -+ { .id = "pll" }, - }; - - ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); ---- a/sound/soc/codecs/tlv320aic32x4.h -+++ b/sound/soc/codecs/tlv320aic32x4.h -@@ -206,6 +206,10 @@ int aic32x4_register_clocks(struct devic - #define AIC32X4_RMICPGANIN_IN1L_10K 0x10 - #define AIC32X4_RMICPGANIN_CM1R_10K 0x40 - -+/* Common mask and enable for all of the dividers */ -+#define AIC32X4_DIVEN BIT(7) -+#define AIC32X4_DIV_MASK GENMASK(6, 0) -+ - /* Clock Limits */ - #define AIC32X4_MAX_PLL_CLKIN 20000000 - diff --git a/target/linux/brcm2708/patches-4.19/950-0401-staging-bcm2835-audio-Use-PCM-runtime-values-instead.patch b/target/linux/brcm2708/patches-4.19/950-0401-staging-bcm2835-audio-Use-PCM-runtime-values-instead.patch new file mode 100644 index 0000000000..ffe06fef60 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0401-staging-bcm2835-audio-Use-PCM-runtime-values-instead.patch @@ -0,0 +1,74 @@ +From 4efb059f297f8234bc188b6bc1e4af673ce9f9e3 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:40 +0200 +Subject: [PATCH] staging: bcm2835-audio: Use PCM runtime values + instead + +commit b8f7fdd50890b848e085c0519469aed4ff4d9b54 upstream. + +Some fields in alsa_stream are the values we keep already in PCM +runtime object, hence they are redundant. Use the standard PCM +runtime values instead of the private copies. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 23 ++++--------------- + .../vc04_services/bcm2835-audio/bcm2835.h | 4 ---- + 2 files changed, 4 insertions(+), 23 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -206,22 +206,7 @@ static int snd_bcm2835_playback_close(st + static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) + { +- struct snd_pcm_runtime *runtime = substream->runtime; +- struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; +- int err; +- +- err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); +- if (err < 0) { +- audio_error +- (" pcm_lib_malloc failed to allocated pages for buffers\n"); +- return err; +- } +- +- alsa_stream->channels = params_channels(params); +- alsa_stream->params_rate = params_rate(params); +- alsa_stream->pcm_format_width = snd_pcm_format_width(params_format(params)); +- +- return err; ++ return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); + } + + /* hw_free callback */ +@@ -248,11 +233,11 @@ static int snd_bcm2835_pcm_prepare(struc + if (chip->spdif_status & IEC958_AES0_NONAUDIO) + channels = 0; + else +- channels = alsa_stream->channels; ++ channels = runtime->channels; + + err = bcm2835_audio_set_params(alsa_stream, channels, +- alsa_stream->params_rate, +- alsa_stream->pcm_format_width); ++ runtime->rate, ++ snd_pcm_format_width(runtime->format)); + if (err < 0) + audio_error(" error setting hw params\n"); + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -121,10 +121,6 @@ struct bcm2835_alsa_stream { + + int draining; + +- int channels; +- int params_rate; +- int pcm_format_width; +- + unsigned int pos; + unsigned int buffer_size; + unsigned int period_size; diff --git a/target/linux/brcm2708/patches-4.19/950-0402-ASoC-tlv320aic32x4-Model-BDIV-divider-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0402-ASoC-tlv320aic32x4-Model-BDIV-divider-in-CCF.patch deleted file mode 100644 index 3bcc52e3e5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0402-ASoC-tlv320aic32x4-Model-BDIV-divider-in-CCF.patch +++ /dev/null @@ -1,210 +0,0 @@ -From 69f3f8c51077d0f3dc7f46c2c9a94da899d8eb7c Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:48 -0700 -Subject: [PATCH 402/806] ASoC: tlv320aic32x4: Model BDIV divider in CCF - -commit 9b484124ebd906c4d6bc826cc0d417e80cc1105c upstream. - -Model and manage BDIV divider as components in the Core -Clock Framework. This should allow us to do some more complex -clock management and power control. Also, some of the -on-board chip clocks can be exposed to the outside, and this -change will make those clocks easier to consume by other -parts of the kernel. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4-clk.c | 36 ++++++++++++++++++ - sound/soc/codecs/tlv320aic32x4.c | 56 +++++++++++++--------------- - 2 files changed, 62 insertions(+), 30 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4-clk.c -+++ b/sound/soc/codecs/tlv320aic32x4-clk.c -@@ -351,6 +351,34 @@ static const struct clk_ops aic32x4_div_ - .recalc_rate = clk_aic32x4_div_recalc_rate, - }; - -+static int clk_aic32x4_bdiv_set_parent(struct clk_hw *hw, u8 index) -+{ -+ struct clk_aic32x4 *mux = to_clk_aic32x4(hw); -+ -+ return regmap_update_bits(mux->regmap, AIC32X4_IFACE3, -+ AIC32X4_BDIVCLK_MASK, index); -+} -+ -+static u8 clk_aic32x4_bdiv_get_parent(struct clk_hw *hw) -+{ -+ struct clk_aic32x4 *mux = to_clk_aic32x4(hw); -+ unsigned int val; -+ -+ regmap_read(mux->regmap, AIC32X4_IFACE3, &val); -+ -+ return val & AIC32X4_BDIVCLK_MASK; -+} -+ -+static const struct clk_ops aic32x4_bdiv_ops = { -+ .prepare = clk_aic32x4_div_prepare, -+ .unprepare = clk_aic32x4_div_unprepare, -+ .set_parent = clk_aic32x4_bdiv_set_parent, -+ .get_parent = clk_aic32x4_bdiv_get_parent, -+ .set_rate = clk_aic32x4_div_set_rate, -+ .round_rate = clk_aic32x4_div_round_rate, -+ .recalc_rate = clk_aic32x4_div_recalc_rate, -+}; -+ - static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { - { - .name = "pll", -@@ -396,6 +424,14 @@ static struct aic32x4_clkdesc aic32x4_cl - .ops = &aic32x4_div_ops, - .reg = AIC32X4_MADC, - }, -+ { -+ .name = "bdiv", -+ .parent_names = -+ (const char *[]) { "ndac", "mdac", "nadc", "madc" }, -+ .num_parents = 4, -+ .ops = &aic32x4_bdiv_ops, -+ .reg = AIC32X4_BCLKN, -+ }, - }; - - static struct clk *aic32x4_register_clk(struct device *dev, ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -57,7 +57,7 @@ struct aic32x4_rate_divs { - u8 aosr; - unsigned long nadc_rate; - unsigned long madc_rate; -- u8 blck_N; -+ unsigned long bdiv_rate; - u8 r_block; - u8 p_block; - }; -@@ -310,53 +310,53 @@ static const struct snd_kcontrol_new aic - static const struct aic32x4_rate_divs aic32x4_divs[] = { - /* 8k rate */ - { 12000000, 8000, 57120000, 768, 18432000, 6144000, 128, 18432000, -- 1024000, 24, 1, 1 }, -+ 1024000, 256000, 1, 1 }, - { 24000000, 8000, 57120000, 768, 6144000, 6144000, 64, 2048000, -- 512000, 24, 1, 1 }, -+ 512000, 256000, 1, 1 }, - { 25000000, 8000, 32620000, 768, 6144000, 6144000, 64, 2048000, -- 512000, 24, 1, 1 }, -+ 512000, 256000, 1, 1 }, - /* 11.025k rate */ - { 12000000, 11025, 44217600, 512, 11289600, 5644800, 128, 11289600, -- 1411200, 16, 1, 1 }, -+ 1411200, 352800, 1, 1 }, - { 24000000, 11025, 44217600, 512, 5644800, 5644800, 64, 2822400, -- 705600, 16, 1, 1 }, -+ 705600, 352800, 1, 1 }, - /* 16k rate */ - { 12000000, 16000, 57120000, 384, 18432000, 6144000, 128, 18432000, -- 2048000, 12, 1, 1 }, -+ 2048000, 512000, 1, 1 }, - { 24000000, 16000, 57120000, 384, 6144000, 6144000, 64, 5120000, -- 1024000, 12, 1, 1 }, -+ 1024000, 512000, 1, 1 }, - { 25000000, 16000, 32620000, 384, 6144000, 6144000, 64, 5120000, -- 1024000, 12, 1, 1 }, -+ 1024000, 512000, 1, 1 }, - /* 22.05k rate */ - { 12000000, 22050, 44217600, 256, 22579200, 5644800, 128, 22579200, -- 2822400, 8, 1, 1 }, -+ 2822400, 705600, 1, 1 }, - { 24000000, 22050, 44217600, 256, 5644800, 5644800, 64, 5644800, -- 1411200, 8, 1, 1 }, -+ 1411200, 705600, 1, 1 }, - { 25000000, 22050, 19713750, 256, 5644800, 5644800, 64, 5644800, -- 1411200, 8, 1, 1 }, -+ 1411200, 705600, 1, 1 }, - /* 32k rate */ - { 12000000, 32000, 14112000, 192, 43008000, 6144000, 64, 43008000, -- 2048000, 6, 1, 1 }, -+ 2048000, 1024000, 1, 1 }, - { 24000000, 32000, 14112000, 192, 12288000, 6144000, 64, 12288000, -- 2048000, 6, 1, 1 }, -+ 2048000, 1024000, 1, 1 }, - /* 44.1k rate */ - { 12000000, 44100, 44217600, 128, 45158400, 5644800, 128, 45158400, -- 5644800, 4, 1, 1 }, -+ 5644800, 1411200, 1, 1 }, - { 24000000, 44100, 44217600, 128, 11289600, 5644800, 64, 11289600, -- 2822400, 4, 1, 1 }, -+ 2822400, 1411200, 1, 1 }, - { 25000000, 44100, 19713750, 128, 11289600, 5644800, 64, 11289600, -- 2822400, 4, 1, 1 }, -+ 2822400, 1411200, 1, 1 }, - /* 48k rate */ - { 12000000, 48000, 18432000, 128, 49152000, 6144000, 128, 49152000, -- 6144000, 4, 1, 1 }, -+ 6144000, 1536000, 1, 1 }, - { 24000000, 48000, 18432000, 128, 12288000, 6144000, 64, 12288000, -- 3072000, 4, 1, 1 }, -+ 3072000, 1536000, 1, 1 }, - { 25000000, 48000, 75626250, 128, 12288000, 6144000, 64, 12288000, -- 3072000, 4, 1, 1 }, -+ 3072000, 1536000, 1, 1 }, - - /* 96k rate */ - { 25000000, 96000, 75626250, 64, 24576000, 6144000, 64, 24576000, -- 6144000, 1, 1, 9 }, -+ 6144000, 3072000, 1, 9 }, - }; - - static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { -@@ -745,6 +745,7 @@ static int aic32x4_setup_clocks(struct s - { .id = "madc" }, - { .id = "ndac" }, - { .id = "mdac" }, -+ { .id = "bdiv" }, - }; - - i = aic32x4_get_divs(parent_rate, sample_rate); -@@ -762,14 +763,10 @@ static int aic32x4_setup_clocks(struct s - clk_set_rate(clocks[2].clk, aic32x4_divs[i].madc_rate); - clk_set_rate(clocks[3].clk, aic32x4_divs[i].ndac_rate); - clk_set_rate(clocks[4].clk, aic32x4_divs[i].mdac_rate); -+ clk_set_rate(clocks[5].clk, aic32x4_divs[i].bdiv_rate); - - aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - -- /* DAC_MOD_CLK as BDIV_CLKIN */ -- snd_soc_component_update_bits(component, AIC32X4_IFACE3, -- AIC32X4_BDIVCLK_MASK, -- AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); -- - /* DOSR MSB & LSB values */ - snd_soc_component_write(component, AIC32X4_DOSRMSB, aic32x4_divs[i].dosr >> 8); - snd_soc_component_write(component, AIC32X4_DOSRLSB, (aic32x4_divs[i].dosr & 0xff)); -@@ -777,10 +774,6 @@ static int aic32x4_setup_clocks(struct s - /* AOSR value */ - snd_soc_component_write(component, AIC32X4_AOSR, aic32x4_divs[i].aosr); - -- /* BCLK N divider */ -- snd_soc_component_update_bits(component, AIC32X4_BCLKN, -- AIC32X4_BCLK_MASK, aic32x4_divs[i].blck_N); -- - return 0; - } - -@@ -1003,6 +996,8 @@ static int aic32x4_component_probe(struc - struct clk_bulk_data clocks[] = { - { .id = "codec_clkin" }, - { .id = "pll" }, -+ { .id = "bdiv" }, -+ { .id = "mdac" }, - }; - - ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); -@@ -1020,6 +1015,7 @@ static int aic32x4_component_probe(struc - aic32x4_setup_gpios(component); - - clk_set_parent(clocks[0].clk, clocks[1].clk); -+ clk_set_parent(clocks[2].clk, clocks[3].clk); - - /* Power platform configuration */ - if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { diff --git a/target/linux/brcm2708/patches-4.19/950-0402-staging-bcm2835-audio-Drop-unnecessary-pcm-indirect-.patch b/target/linux/brcm2708/patches-4.19/950-0402-staging-bcm2835-audio-Drop-unnecessary-pcm-indirect-.patch new file mode 100644 index 0000000000..8012631bd4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0402-staging-bcm2835-audio-Drop-unnecessary-pcm-indirect-.patch @@ -0,0 +1,29 @@ +From a08260154f88b0b97e3c8de6b3cdb7187e8c3d8a Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:41 +0200 +Subject: [PATCH] staging: bcm2835-audio: Drop unnecessary pcm indirect + setup + +commit 7318ec896f4856fae2bb013858e422fa078201e1 upstream. + +The hw_queue_size of PCM indirect helper doesn't need to be set up if +you use the whole given buffer size. Drop the useless +initialization, which just confuses readers. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -280,7 +280,6 @@ static int snd_bcm2835_pcm_ack(struct sn + struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; + struct snd_pcm_indirect *pcm_indirect = &alsa_stream->pcm_indirect; + +- pcm_indirect->hw_queue_size = runtime->hw.buffer_bytes_max; + return snd_pcm_indirect_playback_transfer(substream, pcm_indirect, + snd_bcm2835_pcm_transfer); + } diff --git a/target/linux/brcm2708/patches-4.19/950-0403-ASoC-tlv320aic32x4-Control-clock-gating-with-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0403-ASoC-tlv320aic32x4-Control-clock-gating-with-CCF.patch deleted file mode 100644 index e601d8fb02..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0403-ASoC-tlv320aic32x4-Control-clock-gating-with-CCF.patch +++ /dev/null @@ -1,109 +0,0 @@ -From f844ea32cba0c4030594a0f590725477a5751f32 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:49 -0700 -Subject: [PATCH 403/806] ASoC: tlv320aic32x4: Control clock gating with CCF - -commit d25970b5fd51e9fcf0afbe190908ea4049454da4 upstream. - -Control the clock gating to the various clock components to use -the CCF. This allows us to prepare_enalbe only 3 clocks and the -relationships assigned to them will cause upstream clockss to -enable automatically. Additionally we can do this in a single -call to the CCF. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 67 +++++++------------------------- - 1 file changed, 13 insertions(+), 54 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -836,41 +836,25 @@ static int aic32x4_mute(struct snd_soc_d - static int aic32x4_set_bias_level(struct snd_soc_component *component, - enum snd_soc_bias_level level) - { -- struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); - int ret; - -+ struct clk_bulk_data clocks[] = { -+ { .id = "madc" }, -+ { .id = "mdac" }, -+ { .id = "bdiv" }, -+ }; -+ -+ ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); -+ if (ret) -+ return ret; -+ - switch (level) { - case SND_SOC_BIAS_ON: -- /* Switch on master clock */ -- ret = clk_prepare_enable(aic32x4->mclk); -+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(clocks), clocks); - if (ret) { -- dev_err(component->dev, "Failed to enable master clock\n"); -+ dev_err(component->dev, "Failed to enable clocks\n"); - return ret; - } -- -- /* Switch on PLL */ -- snd_soc_component_update_bits(component, AIC32X4_PLLPR, -- AIC32X4_PLLEN, AIC32X4_PLLEN); -- -- /* Switch on NDAC Divider */ -- snd_soc_component_update_bits(component, AIC32X4_NDAC, -- AIC32X4_NDACEN, AIC32X4_NDACEN); -- -- /* Switch on MDAC Divider */ -- snd_soc_component_update_bits(component, AIC32X4_MDAC, -- AIC32X4_MDACEN, AIC32X4_MDACEN); -- -- /* Switch on NADC Divider */ -- snd_soc_component_update_bits(component, AIC32X4_NADC, -- AIC32X4_NADCEN, AIC32X4_NADCEN); -- -- /* Switch on MADC Divider */ -- snd_soc_component_update_bits(component, AIC32X4_MADC, -- AIC32X4_MADCEN, AIC32X4_MADCEN); -- -- /* Switch on BCLK_N Divider */ -- snd_soc_component_update_bits(component, AIC32X4_BCLKN, -- AIC32X4_BCLKEN, AIC32X4_BCLKEN); - break; - case SND_SOC_BIAS_PREPARE: - break; -@@ -879,32 +863,7 @@ static int aic32x4_set_bias_level(struct - if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) - break; - -- /* Switch off BCLK_N Divider */ -- snd_soc_component_update_bits(component, AIC32X4_BCLKN, -- AIC32X4_BCLKEN, 0); -- -- /* Switch off MADC Divider */ -- snd_soc_component_update_bits(component, AIC32X4_MADC, -- AIC32X4_MADCEN, 0); -- -- /* Switch off NADC Divider */ -- snd_soc_component_update_bits(component, AIC32X4_NADC, -- AIC32X4_NADCEN, 0); -- -- /* Switch off MDAC Divider */ -- snd_soc_component_update_bits(component, AIC32X4_MDAC, -- AIC32X4_MDACEN, 0); -- -- /* Switch off NDAC Divider */ -- snd_soc_component_update_bits(component, AIC32X4_NDAC, -- AIC32X4_NDACEN, 0); -- -- /* Switch off PLL */ -- snd_soc_component_update_bits(component, AIC32X4_PLLPR, -- AIC32X4_PLLEN, 0); -- -- /* Switch off master clock */ -- clk_disable_unprepare(aic32x4->mclk); -+ clk_bulk_disable_unprepare(ARRAY_SIZE(clocks), clocks); - break; - case SND_SOC_BIAS_OFF: - break; diff --git a/target/linux/brcm2708/patches-4.19/950-0403-staging-bcm2835-audio-Drop-useless-NULL-check.patch b/target/linux/brcm2708/patches-4.19/950-0403-staging-bcm2835-audio-Drop-useless-NULL-check.patch new file mode 100644 index 0000000000..ab5a0ed8a2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0403-staging-bcm2835-audio-Drop-useless-NULL-check.patch @@ -0,0 +1,28 @@ +From 9f3956e7bbf868894b5aee41110dbe28f117918c Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:42 +0200 +Subject: [PATCH] staging: bcm2835-audio: Drop useless NULL check + +commit 8bcf9f252c29c2d5bcce3db605c0ebf1ef230f9c upstream. + +alsa_stream->chip can be never NULL. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -188,8 +188,7 @@ static int snd_bcm2835_playback_close(st + alsa_stream->buffer_size = 0; + + bcm2835_audio_close(alsa_stream); +- if (alsa_stream->chip) +- alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; ++ alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; + /* + * Do not free up alsa_stream here, it will be freed up by + * runtime->private_free callback we registered in *_open above diff --git a/target/linux/brcm2708/patches-4.19/950-0404-ASoC-tlv320aic32x4-Move-aosr-and-dosr-setting-to-sep.patch b/target/linux/brcm2708/patches-4.19/950-0404-ASoC-tlv320aic32x4-Move-aosr-and-dosr-setting-to-sep.patch deleted file mode 100644 index 2a37d65abb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0404-ASoC-tlv320aic32x4-Move-aosr-and-dosr-setting-to-sep.patch +++ /dev/null @@ -1,58 +0,0 @@ -From a2d8d212b986e4a4ae52c748d246e4c28ebaf1bc Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:50 -0700 -Subject: [PATCH 404/806] ASoC: tlv320aic32x4: Move aosr and dosr setting to - separate functions - -commit fbafbf6517274a797e6e6508c18dd8dba5920c89 upstream. - -Move these to separate helper functions. This looks cleaner and fits -better with the new clock setting in CCF. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 24 +++++++++++++++++------- - 1 file changed, 17 insertions(+), 7 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -720,6 +720,20 @@ static int aic32x4_set_dai_fmt(struct sn - return 0; - } - -+static int aic32x4_set_aosr(struct snd_soc_component *component, u8 aosr) -+{ -+ return snd_soc_component_write(component, AIC32X4_AOSR, aosr); -+} -+ -+static int aic32x4_set_dosr(struct snd_soc_component *component, u16 dosr) -+{ -+ snd_soc_component_write(component, AIC32X4_DOSRMSB, dosr >> 8); -+ snd_soc_component_write(component, AIC32X4_DOSRLSB, -+ (dosr & 0xff)); -+ -+ return 0; -+} -+ - static int aic32x4_set_processing_blocks(struct snd_soc_component *component, - u8 r_block, u8 p_block) - { -@@ -765,14 +779,10 @@ static int aic32x4_setup_clocks(struct s - clk_set_rate(clocks[4].clk, aic32x4_divs[i].mdac_rate); - clk_set_rate(clocks[5].clk, aic32x4_divs[i].bdiv_rate); - -- aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); -+ aic32x4_set_aosr(component, aic32x4_divs[i].aosr); -+ aic32x4_set_dosr(component, aic32x4_divs[i].dosr); - -- /* DOSR MSB & LSB values */ -- snd_soc_component_write(component, AIC32X4_DOSRMSB, aic32x4_divs[i].dosr >> 8); -- snd_soc_component_write(component, AIC32X4_DOSRLSB, (aic32x4_divs[i].dosr & 0xff)); -- -- /* AOSR value */ -- snd_soc_component_write(component, AIC32X4_AOSR, aic32x4_divs[i].aosr); -+ aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - - return 0; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0404-staging-bcm2835-audio-Propagate-parameter-setup-erro.patch b/target/linux/brcm2708/patches-4.19/950-0404-staging-bcm2835-audio-Propagate-parameter-setup-erro.patch new file mode 100644 index 0000000000..dc6525089c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0404-staging-bcm2835-audio-Propagate-parameter-setup-erro.patch @@ -0,0 +1,40 @@ +From 2ab24bca59da765a12f4617527e671170230bf3a Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:43 +0200 +Subject: [PATCH] staging: bcm2835-audio: Propagate parameter setup + error + +commit fee5638fe552ff8222c3a5bdcc4a34255e248d8c upstream. + +When the parameter setup fails, the driver should propagate the error +code instead of silently ignoring it. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -238,7 +238,7 @@ static int snd_bcm2835_pcm_prepare(struc + runtime->rate, + snd_pcm_format_width(runtime->format)); + if (err < 0) +- audio_error(" error setting hw params\n"); ++ goto out; + + memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); + +@@ -255,8 +255,9 @@ static int snd_bcm2835_pcm_prepare(struc + alsa_stream->buffer_size, alsa_stream->period_size, + alsa_stream->pos, runtime->frame_bits); + ++ out: + mutex_unlock(&chip->audio_mutex); +- return 0; ++ return err; + } + + static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream, diff --git a/target/linux/brcm2708/patches-4.19/950-0405-ASoC-tlv320aic32x4-Dynamically-Determine-Clocking.patch b/target/linux/brcm2708/patches-4.19/950-0405-ASoC-tlv320aic32x4-Dynamically-Determine-Clocking.patch deleted file mode 100644 index 173af094d4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0405-ASoC-tlv320aic32x4-Dynamically-Determine-Clocking.patch +++ /dev/null @@ -1,285 +0,0 @@ -From 3e62c56daa1c799bb2a1d954ecfb88e8d37421bb Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:51 -0700 -Subject: [PATCH 405/806] ASoC: tlv320aic32x4: Dynamically Determine Clocking - -commit 96c3bb00239de4fb5f4ddca42c1f90d6d9b3c697 upstream. - -The existing code uses a static lookup table to determine the -settings of the various clock devices on board the chip. This is -limiting in a couple of ways. First, this doesn't allow for any -master clock rates other than the three that have been -precalculated. Additionally, new sample rates are difficult to -add to the table. Witness that the chip is capable of 192000 Hz -sampling, but it is not provided by this driver. Last, if the -driver is clocked by something that isn't a crystal, the -upstream clock may not be able to achieve exactly the rate -requested in the driver. This will mean that clocking will be -slightly off for the sampling clock or that it won't work at all. - -This patch determines the settings for all of the clocks at -runtime considering the real conditions of the clocks in the -system. The rules for the clocks are in TI's SLAA557 application -guide on pages 37, 51 and 77. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 190 ++++++++++++++----------------- - sound/soc/codecs/tlv320aic32x4.h | 4 +- - 2 files changed, 90 insertions(+), 104 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -47,21 +47,6 @@ - - #include "tlv320aic32x4.h" - --struct aic32x4_rate_divs { -- u32 mclk; -- u32 rate; -- unsigned long pll_rate; -- u16 dosr; -- unsigned long ndac_rate; -- unsigned long mdac_rate; -- u8 aosr; -- unsigned long nadc_rate; -- unsigned long madc_rate; -- unsigned long bdiv_rate; -- u8 r_block; -- u8 p_block; --}; -- - struct aic32x4_priv { - struct regmap *regmap; - u32 sysclk; -@@ -307,58 +292,6 @@ static const struct snd_kcontrol_new aic - 0, 0x0F, 0), - }; - --static const struct aic32x4_rate_divs aic32x4_divs[] = { -- /* 8k rate */ -- { 12000000, 8000, 57120000, 768, 18432000, 6144000, 128, 18432000, -- 1024000, 256000, 1, 1 }, -- { 24000000, 8000, 57120000, 768, 6144000, 6144000, 64, 2048000, -- 512000, 256000, 1, 1 }, -- { 25000000, 8000, 32620000, 768, 6144000, 6144000, 64, 2048000, -- 512000, 256000, 1, 1 }, -- /* 11.025k rate */ -- { 12000000, 11025, 44217600, 512, 11289600, 5644800, 128, 11289600, -- 1411200, 352800, 1, 1 }, -- { 24000000, 11025, 44217600, 512, 5644800, 5644800, 64, 2822400, -- 705600, 352800, 1, 1 }, -- /* 16k rate */ -- { 12000000, 16000, 57120000, 384, 18432000, 6144000, 128, 18432000, -- 2048000, 512000, 1, 1 }, -- { 24000000, 16000, 57120000, 384, 6144000, 6144000, 64, 5120000, -- 1024000, 512000, 1, 1 }, -- { 25000000, 16000, 32620000, 384, 6144000, 6144000, 64, 5120000, -- 1024000, 512000, 1, 1 }, -- /* 22.05k rate */ -- { 12000000, 22050, 44217600, 256, 22579200, 5644800, 128, 22579200, -- 2822400, 705600, 1, 1 }, -- { 24000000, 22050, 44217600, 256, 5644800, 5644800, 64, 5644800, -- 1411200, 705600, 1, 1 }, -- { 25000000, 22050, 19713750, 256, 5644800, 5644800, 64, 5644800, -- 1411200, 705600, 1, 1 }, -- /* 32k rate */ -- { 12000000, 32000, 14112000, 192, 43008000, 6144000, 64, 43008000, -- 2048000, 1024000, 1, 1 }, -- { 24000000, 32000, 14112000, 192, 12288000, 6144000, 64, 12288000, -- 2048000, 1024000, 1, 1 }, -- /* 44.1k rate */ -- { 12000000, 44100, 44217600, 128, 45158400, 5644800, 128, 45158400, -- 5644800, 1411200, 1, 1 }, -- { 24000000, 44100, 44217600, 128, 11289600, 5644800, 64, 11289600, -- 2822400, 1411200, 1, 1 }, -- { 25000000, 44100, 19713750, 128, 11289600, 5644800, 64, 11289600, -- 2822400, 1411200, 1, 1 }, -- /* 48k rate */ -- { 12000000, 48000, 18432000, 128, 49152000, 6144000, 128, 49152000, -- 6144000, 1536000, 1, 1 }, -- { 24000000, 48000, 18432000, 128, 12288000, 6144000, 64, 12288000, -- 3072000, 1536000, 1, 1 }, -- { 25000000, 48000, 75626250, 128, 12288000, 6144000, 64, 12288000, -- 3072000, 1536000, 1, 1 }, -- -- /* 96k rate */ -- { 25000000, 96000, 75626250, 64, 24576000, 6144000, 64, 24576000, -- 6144000, 3072000, 1, 9 }, --}; -- - static const struct snd_kcontrol_new hpl_output_mixer_controls[] = { - SOC_DAPM_SINGLE("L_DAC Switch", AIC32X4_HPLROUTE, 3, 1, 0), - SOC_DAPM_SINGLE("IN1_L Switch", AIC32X4_HPLROUTE, 2, 1, 0), -@@ -632,20 +565,6 @@ const struct regmap_config aic32x4_regma - }; - EXPORT_SYMBOL(aic32x4_regmap_config); - --static inline int aic32x4_get_divs(int mclk, int rate) --{ -- int i; -- -- for (i = 0; i < ARRAY_SIZE(aic32x4_divs); i++) { -- if ((aic32x4_divs[i].rate == rate) -- && (aic32x4_divs[i].mclk == mclk)) { -- return i; -- } -- } -- printk(KERN_ERR "aic32x4: master clock and sample rate is not supported\n"); -- return -EINVAL; --} -- - static int aic32x4_set_dai_sysclk(struct snd_soc_dai *codec_dai, - int clk_id, unsigned int freq, int dir) - { -@@ -747,11 +666,17 @@ static int aic32x4_set_processing_blocks - } - - static int aic32x4_setup_clocks(struct snd_soc_component *component, -- unsigned int sample_rate, -- unsigned int parent_rate) -+ unsigned int sample_rate) - { -- int i; -+ u8 aosr; -+ u16 dosr; -+ u8 adc_resource_class, dac_resource_class; -+ u8 madc, nadc, mdac, ndac, max_nadc, min_mdac, max_ndac; -+ u8 dosr_increment; -+ u16 max_dosr, min_dosr; -+ unsigned long mclk_rate, adc_clock_rate, dac_clock_rate; - int ret; -+ struct clk *mclk; - - struct clk_bulk_data clocks[] = { - { .id = "pll" }, -@@ -761,30 +686,89 @@ static int aic32x4_setup_clocks(struct s - { .id = "mdac" }, - { .id = "bdiv" }, - }; -- -- i = aic32x4_get_divs(parent_rate, sample_rate); -- if (i < 0) { -- printk(KERN_ERR "aic32x4: sampling rate not supported\n"); -- return i; -- } -- - ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); - if (ret) - return ret; - -- clk_set_rate(clocks[0].clk, aic32x4_divs[i].pll_rate); -- clk_set_rate(clocks[1].clk, aic32x4_divs[i].nadc_rate); -- clk_set_rate(clocks[2].clk, aic32x4_divs[i].madc_rate); -- clk_set_rate(clocks[3].clk, aic32x4_divs[i].ndac_rate); -- clk_set_rate(clocks[4].clk, aic32x4_divs[i].mdac_rate); -- clk_set_rate(clocks[5].clk, aic32x4_divs[i].bdiv_rate); -+ mclk = clk_get_parent(clocks[1].clk); -+ mclk_rate = clk_get_rate(mclk); - -- aic32x4_set_aosr(component, aic32x4_divs[i].aosr); -- aic32x4_set_dosr(component, aic32x4_divs[i].dosr); -+ if (sample_rate <= 48000) { -+ aosr = 128; -+ adc_resource_class = 6; -+ dac_resource_class = 8; -+ dosr_increment = 8; -+ aic32x4_set_processing_blocks(component, 1, 1); -+ } else if (sample_rate <= 96000) { -+ aosr = 64; -+ adc_resource_class = 6; -+ dac_resource_class = 8; -+ dosr_increment = 4; -+ aic32x4_set_processing_blocks(component, 1, 9); -+ } else if (sample_rate == 192000) { -+ aosr = 32; -+ adc_resource_class = 3; -+ dac_resource_class = 4; -+ dosr_increment = 2; -+ aic32x4_set_processing_blocks(component, 13, 19); -+ } else { -+ dev_err(component->dev, "Sampling rate not supported\n"); -+ return -EINVAL; -+ } - -- aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); -+ madc = DIV_ROUND_UP((32 * adc_resource_class), aosr); -+ max_dosr = (AIC32X4_MAX_DOSR_FREQ / sample_rate / dosr_increment) * -+ dosr_increment; -+ min_dosr = (AIC32X4_MIN_DOSR_FREQ / sample_rate / dosr_increment) * -+ dosr_increment; -+ max_nadc = AIC32X4_MAX_CODEC_CLKIN_FREQ / (madc * aosr * sample_rate); -+ -+ for (nadc = max_nadc; nadc > 0; --nadc) { -+ adc_clock_rate = nadc * madc * aosr * sample_rate; -+ for (dosr = max_dosr; dosr >= min_dosr; -+ dosr -= dosr_increment) { -+ min_mdac = DIV_ROUND_UP((32 * dac_resource_class), dosr); -+ max_ndac = AIC32X4_MAX_CODEC_CLKIN_FREQ / -+ (min_mdac * dosr * sample_rate); -+ for (mdac = min_mdac; mdac <= 128; ++mdac) { -+ for (ndac = max_ndac; ndac > 0; --ndac) { -+ dac_clock_rate = ndac * mdac * dosr * -+ sample_rate; -+ if (dac_clock_rate == adc_clock_rate) { -+ if (clk_round_rate(clocks[0].clk, dac_clock_rate) == 0) -+ continue; -+ -+ clk_set_rate(clocks[0].clk, -+ dac_clock_rate); -+ -+ clk_set_rate(clocks[1].clk, -+ sample_rate * aosr * -+ madc); -+ clk_set_rate(clocks[2].clk, -+ sample_rate * aosr); -+ aic32x4_set_aosr(component, -+ aosr); -+ -+ clk_set_rate(clocks[3].clk, -+ sample_rate * dosr * -+ mdac); -+ clk_set_rate(clocks[4].clk, -+ sample_rate * dosr); -+ aic32x4_set_dosr(component, -+ dosr); -+ -+ clk_set_rate(clocks[5].clk, -+ sample_rate * 32); -+ return 0; -+ } -+ } -+ } -+ } -+ } - -- return 0; -+ dev_err(component->dev, -+ "Could not set clocks to support sample rate.\n"); -+ return -EINVAL; - } - - static int aic32x4_hw_params(struct snd_pcm_substream *substream, -@@ -796,7 +780,7 @@ static int aic32x4_hw_params(struct snd_ - u8 iface1_reg = 0; - u8 dacsetup_reg = 0; - -- aic32x4_setup_clocks(component, params_rate(params), aic32x4->sysclk); -+ aic32x4_setup_clocks(component, params_rate(params)); - - switch (params_width(params)) { - case 16: ---- a/sound/soc/codecs/tlv320aic32x4.h -+++ b/sound/soc/codecs/tlv320aic32x4.h -@@ -211,7 +211,9 @@ int aic32x4_register_clocks(struct devic - #define AIC32X4_DIV_MASK GENMASK(6, 0) - - /* Clock Limits */ -+#define AIC32X4_MAX_DOSR_FREQ 6200000 -+#define AIC32X4_MIN_DOSR_FREQ 2800000 -+#define AIC32X4_MAX_CODEC_CLKIN_FREQ 110000000 - #define AIC32X4_MAX_PLL_CLKIN 20000000 - -- - #endif /* _TLV320AIC32X4_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0405-staging-bcm2835-audio-Drop-debug-messages-in-bcm2835.patch b/target/linux/brcm2708/patches-4.19/950-0405-staging-bcm2835-audio-Drop-debug-messages-in-bcm2835.patch new file mode 100644 index 0000000000..96a4d732c1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0405-staging-bcm2835-audio-Drop-debug-messages-in-bcm2835.patch @@ -0,0 +1,150 @@ +From e109804fa00a139a05626c1b8ceebcfe3577fc6d Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:44 +0200 +Subject: [PATCH] staging: bcm2835-audio: Drop debug messages in + bcm2835-pcm.c + +commit 055e1c330d04df87d4730a5db837161c11ddaafc upstream. + +These debug messages worsen the code readability a lot while they give +little debuggability (which we already have via tracing, in anyway). + +Let's clean them up. This allows us to reduce the +snd_bcm2835_pcm_lib_ioctl() function to be a direct call of the +snd_pcm_lib_ioctl callback (like most other drivers do), too. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 51 +++---------------- + 1 file changed, 7 insertions(+), 44 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -44,9 +44,7 @@ static const struct snd_pcm_hardware snd + + static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime) + { +- audio_info("Freeing up alsa stream here ..\n"); + kfree(runtime->private_data); +- runtime->private_data = NULL; + } + + void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream) +@@ -99,7 +97,6 @@ static int snd_bcm2835_playback_open_gen + int err; + + mutex_lock(&chip->audio_mutex); +- audio_info("Alsa open (%d)\n", substream->number); + idx = substream->number; + + if (spdif && chip->opened) { +@@ -182,8 +179,6 @@ static int snd_bcm2835_playback_close(st + runtime = substream->runtime; + alsa_stream = runtime->private_data; + +- audio_info("Alsa close\n"); +- + alsa_stream->period_size = 0; + alsa_stream->buffer_size = 0; + +@@ -251,10 +246,6 @@ static int snd_bcm2835_pcm_prepare(struc + alsa_stream->pos = 0; + alsa_stream->draining = false; + +- audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", +- alsa_stream->buffer_size, alsa_stream->period_size, +- alsa_stream->pos, runtime->frame_bits); +- + out: + mutex_unlock(&chip->audio_mutex); + return err; +@@ -266,12 +257,8 @@ static void snd_bcm2835_pcm_transfer(str + struct snd_pcm_runtime *runtime = substream->runtime; + struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; + void *src = (void *) (substream->runtime->dma_area + rec->sw_data); +- int err; +- +- err = bcm2835_audio_write(alsa_stream, bytes, src); +- if (err) +- audio_error(" Failed to transfer to alsa device (%d)\n", err); + ++ bcm2835_audio_write(alsa_stream, bytes, src); + } + + static int snd_bcm2835_pcm_ack(struct snd_pcm_substream *substream) +@@ -289,27 +276,18 @@ static int snd_bcm2835_pcm_trigger(struc + { + struct snd_pcm_runtime *runtime = substream->runtime; + struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; +- int err = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: +- err = bcm2835_audio_start(alsa_stream); +- if (err) +- audio_error(" Failed to START alsa device (%d)\n", err); +- break; ++ return bcm2835_audio_start(alsa_stream); + case SNDRV_PCM_TRIGGER_DRAIN: + alsa_stream->draining = true; +- break; ++ return 0; + case SNDRV_PCM_TRIGGER_STOP: +- err = bcm2835_audio_stop(alsa_stream); +- if (err) +- audio_error(" Failed to STOP alsa device (%d)\n", err); +- break; ++ return bcm2835_audio_stop(alsa_stream); + default: +- err = -EINVAL; ++ return -EINVAL; + } +- +- return err; + } + + /* pointer callback */ +@@ -319,31 +297,16 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s + struct snd_pcm_runtime *runtime = substream->runtime; + struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; + +- audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, +- frames_to_bytes(runtime, runtime->status->hw_ptr), +- frames_to_bytes(runtime, runtime->control->appl_ptr), +- alsa_stream->pos); +- + return snd_pcm_indirect_playback_pointer(substream, + &alsa_stream->pcm_indirect, + alsa_stream->pos); + } + +-static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream, +- unsigned int cmd, void *arg) +-{ +- int ret = snd_pcm_lib_ioctl(substream, cmd, arg); +- +- audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream, +- cmd, arg, arg ? *(unsigned int *)arg : 0, ret); +- return ret; +-} +- + /* operators */ + static const struct snd_pcm_ops snd_bcm2835_playback_ops = { + .open = snd_bcm2835_playback_open, + .close = snd_bcm2835_playback_close, +- .ioctl = snd_bcm2835_pcm_lib_ioctl, ++ .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_bcm2835_pcm_hw_params, + .hw_free = snd_bcm2835_pcm_hw_free, + .prepare = snd_bcm2835_pcm_prepare, +@@ -355,7 +318,7 @@ static const struct snd_pcm_ops snd_bcm2 + static const struct snd_pcm_ops snd_bcm2835_playback_spdif_ops = { + .open = snd_bcm2835_playback_spdif_open, + .close = snd_bcm2835_playback_close, +- .ioctl = snd_bcm2835_pcm_lib_ioctl, ++ .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_bcm2835_pcm_hw_params, + .hw_free = snd_bcm2835_pcm_hw_free, + .prepare = snd_bcm2835_pcm_prepare, diff --git a/target/linux/brcm2708/patches-4.19/950-0406-ASoC-tlv320aic32x4-Restructure-set_dai_sysclk.patch b/target/linux/brcm2708/patches-4.19/950-0406-ASoC-tlv320aic32x4-Restructure-set_dai_sysclk.patch deleted file mode 100644 index 1f26a578db..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0406-ASoC-tlv320aic32x4-Restructure-set_dai_sysclk.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 5ec6ed3e423878cf975a955c8796c2cdb10b5ca7 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:52 -0700 -Subject: [PATCH 406/806] ASoC: tlv320aic32x4: Restructure set_dai_sysclk - -commit aa6a60f7be925210d5156f0e8025f3afe1f4f54d upstream. - -The sysclk is now managed by the CCF. Change this function -to merely find the system clock and set it using -clk_set_rate. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 17 ++++++----------- - 1 file changed, 6 insertions(+), 11 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -49,7 +49,6 @@ - - struct aic32x4_priv { - struct regmap *regmap; -- u32 sysclk; - u32 power_cfg; - u32 micpga_routing; - bool swapdacs; -@@ -569,17 +568,13 @@ static int aic32x4_set_dai_sysclk(struct - int clk_id, unsigned int freq, int dir) - { - struct snd_soc_component *component = codec_dai->component; -- struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); -+ struct clk *mclk; -+ struct clk *pll; - -- switch (freq) { -- case 12000000: -- case 24000000: -- case 25000000: -- aic32x4->sysclk = freq; -- return 0; -- } -- printk(KERN_ERR "aic32x4: invalid frequency to set DAI system clock\n"); -- return -EINVAL; -+ pll = devm_clk_get(component->dev, "pll"); -+ mclk = clk_get_parent(pll); -+ -+ return clk_set_rate(mclk, freq); - } - - static int aic32x4_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) diff --git a/target/linux/brcm2708/patches-4.19/950-0406-staging-bcm2835-audio-Drop-superfluous-mutex-lock-du.patch b/target/linux/brcm2708/patches-4.19/950-0406-staging-bcm2835-audio-Drop-superfluous-mutex-lock-du.patch new file mode 100644 index 0000000000..a70081159f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0406-staging-bcm2835-audio-Drop-superfluous-mutex-lock-du.patch @@ -0,0 +1,49 @@ +From 3c7663a9b1763f64250db4b975a3ce246ef32e0f Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:45 +0200 +Subject: [PATCH] staging: bcm2835-audio: Drop superfluous mutex lock + during prepare + +commit f0eb15d055380ff127e5f12c8fad2b36bdb3c006 upstream. + +The chip->audio_mutex is used basically for protecting the opened +stream assignment, and the prepare callback is irrelevant with it. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -218,8 +218,6 @@ static int snd_bcm2835_pcm_prepare(struc + int channels; + int err; + +- mutex_lock(&chip->audio_mutex); +- + /* notify the vchiq that it should enter spdif passthrough mode by + * setting channels=0 (see + * https://github.com/raspberrypi/linux/issues/528) +@@ -233,7 +231,7 @@ static int snd_bcm2835_pcm_prepare(struc + runtime->rate, + snd_pcm_format_width(runtime->format)); + if (err < 0) +- goto out; ++ return err; + + memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); + +@@ -246,9 +244,7 @@ static int snd_bcm2835_pcm_prepare(struc + alsa_stream->pos = 0; + alsa_stream->draining = false; + +- out: +- mutex_unlock(&chip->audio_mutex); +- return err; ++ return 0; + } + + static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream, diff --git a/target/linux/brcm2708/patches-4.19/950-0407-ASoC-tlv320aic32x4-Remove-mclk-references.patch b/target/linux/brcm2708/patches-4.19/950-0407-ASoC-tlv320aic32x4-Remove-mclk-references.patch deleted file mode 100644 index 7f3e708191..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0407-ASoC-tlv320aic32x4-Remove-mclk-references.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 3c7bf08e6b6bdc2e6005aaa5e6aa6d12ce40d406 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:53 -0700 -Subject: [PATCH 407/806] ASoC: tlv320aic32x4: Remove mclk references - -commit 78f2d58a289302e56a7def96a783a7686ebf27e2 upstream. - -mclk is not used by anything anymore. Remove support for it. -All that information now comes from the clock tree. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 7 ------- - 1 file changed, 7 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -53,7 +53,6 @@ struct aic32x4_priv { - u32 micpga_routing; - bool swapdacs; - int rstn_gpio; -- struct clk *mclk; - const char *mclk_name; - - struct regulator *supply_ldo; -@@ -1191,12 +1190,6 @@ int aic32x4_probe(struct device *dev, st - aic32x4->mclk_name = "mclk"; - } - -- aic32x4->mclk = devm_clk_get(dev, "mclk"); -- if (IS_ERR(aic32x4->mclk)) { -- dev_err(dev, "Failed getting the mclk. The current implementation does not support the usage of this codec without mclk\n"); -- return PTR_ERR(aic32x4->mclk); -- } -- - ret = aic32x4_register_clocks(dev, aic32x4->mclk_name); - if (ret) - return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0407-staging-bcm2835-audio-Add-10ms-period-constraint.patch b/target/linux/brcm2708/patches-4.19/950-0407-staging-bcm2835-audio-Add-10ms-period-constraint.patch new file mode 100644 index 0000000000..07e96f61ed --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0407-staging-bcm2835-audio-Add-10ms-period-constraint.patch @@ -0,0 +1,33 @@ +From daa78c198ece1ec901ee565c869ee1a60a95061d Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:46 +0200 +Subject: [PATCH] staging: bcm2835-audio: Add 10ms period constraint + +commit 93c66acaf68b5247c3121a46a71ff6a70fc1d492 upstream. + +It seems that the resolution of vc04 callback is in 10 msec; i.e. the +minimal period size is also 10 msec. + +This patch adds the corresponding hw constraint. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -145,6 +145,11 @@ static int snd_bcm2835_playback_open_gen + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, + 16); + ++ /* position update is in 10ms order */ ++ snd_pcm_hw_constraint_minmax(runtime, ++ SNDRV_PCM_HW_PARAM_PERIOD_TIME, ++ 10 * 1000, UINT_MAX); ++ + chip->alsa_stream[idx] = alsa_stream; + + chip->opened |= (1 << idx); diff --git a/target/linux/brcm2708/patches-4.19/950-0408-ASoC-tlv320aic32x4-Allow-192000-Sample-Rate.patch b/target/linux/brcm2708/patches-4.19/950-0408-ASoC-tlv320aic32x4-Allow-192000-Sample-Rate.patch deleted file mode 100644 index c4673249c5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0408-ASoC-tlv320aic32x4-Allow-192000-Sample-Rate.patch +++ /dev/null @@ -1,27 +0,0 @@ -From e54269cdeb78beb5131594de702daeecc2b05ec2 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Thu, 21 Mar 2019 17:58:54 -0700 -Subject: [PATCH 408/806] ASoC: tlv320aic32x4: Allow 192000 Sample Rate - -commit 6d56ee1550b8a81bc63c80051ff78d8d704b09ba upstream. - -The clocking and processing blocks are now properly set up to -support 192000 sample rates. Allow drivers to ask for that. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -859,7 +859,7 @@ static int aic32x4_set_bias_level(struct - return 0; - } - --#define AIC32X4_RATES SNDRV_PCM_RATE_8000_96000 -+#define AIC32X4_RATES SNDRV_PCM_RATE_8000_192000 - #define AIC32X4_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \ - | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) - diff --git a/target/linux/brcm2708/patches-4.19/950-0408-staging-bcm2835-audio-Make-single-vchi-handle.patch b/target/linux/brcm2708/patches-4.19/950-0408-staging-bcm2835-audio-Make-single-vchi-handle.patch new file mode 100644 index 0000000000..eb6538dff3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0408-staging-bcm2835-audio-Make-single-vchi-handle.patch @@ -0,0 +1,412 @@ +From 98a1612b199cb3060306c05d1a6d7ca18ef08475 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:47 +0200 +Subject: [PATCH] staging: bcm2835-audio: Make single vchi handle + +commit 326a6edcb2ada56375bd7d3fc24c83f58e8da7f3 upstream. + +The bcm2835_audio_instance object contains the array of +VCHI_SERVICE_HANDLE_T, while the code assumes and uses only the first +element explicitly. Let's reduce to a single vchi handle for +simplifying the code. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../bcm2835-audio/bcm2835-vchiq.c | 170 ++++++------------ + 1 file changed, 58 insertions(+), 112 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -44,8 +44,7 @@ + #endif + + struct bcm2835_audio_instance { +- unsigned int num_connections; +- VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; ++ VCHI_SERVICE_HANDLE_T vchi_handle; + struct completion msg_avail_comp; + struct mutex vchi_mutex; + struct bcm2835_alsa_stream *alsa_stream; +@@ -202,12 +201,12 @@ static void audio_vchi_callback(void *pa + BUG(); + return; + } +- if (!instance->vchi_handle[0]) { +- LOG_ERR(" .. instance->vchi_handle[0] is null\n"); ++ if (!instance->vchi_handle) { ++ LOG_ERR(" .. instance->vchi_handle is null\n"); + BUG(); + return; + } +- status = vchi_msg_dequeue(instance->vchi_handle[0], ++ status = vchi_msg_dequeue(instance->vchi_handle, + &m, sizeof(m), &msg_len, VCHI_FLAGS_NONE); + if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { + LOG_DBG(" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n", +@@ -237,102 +236,61 @@ static void audio_vchi_callback(void *pa + + static struct bcm2835_audio_instance * + vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance, +- VCHI_CONNECTION_T **vchi_connections, +- unsigned int num_connections) ++ VCHI_CONNECTION_T *vchi_connection) + { +- unsigned int i; ++ SERVICE_CREATION_T params = { ++ .version = VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER), ++ .service_id = VC_AUDIO_SERVER_NAME, ++ .connection = vchi_connection, ++ .rx_fifo_size = 0, ++ .tx_fifo_size = 0, ++ .callback = audio_vchi_callback, ++ .want_unaligned_bulk_rx = 1, //TODO: remove VCOS_FALSE ++ .want_unaligned_bulk_tx = 1, //TODO: remove VCOS_FALSE ++ .want_crc = 0 ++ }; + struct bcm2835_audio_instance *instance; + int status; +- int ret; +- +- LOG_DBG("%s: start", __func__); + +- if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { +- LOG_ERR("%s: unsupported number of connections %u (max=%u)\n", +- __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); +- +- return ERR_PTR(-EINVAL); +- } + /* Allocate memory for this instance */ + instance = kzalloc(sizeof(*instance), GFP_KERNEL); + if (!instance) + return ERR_PTR(-ENOMEM); + +- instance->num_connections = num_connections; +- + /* Create a lock for exclusive, serialized VCHI connection access */ + mutex_init(&instance->vchi_mutex); + /* Open the VCHI service connections */ +- for (i = 0; i < num_connections; i++) { +- SERVICE_CREATION_T params = { +- .version = VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER), +- .service_id = VC_AUDIO_SERVER_NAME, +- .connection = vchi_connections[i], +- .rx_fifo_size = 0, +- .tx_fifo_size = 0, +- .callback = audio_vchi_callback, +- .callback_param = instance, +- .want_unaligned_bulk_rx = 1, //TODO: remove VCOS_FALSE +- .want_unaligned_bulk_tx = 1, //TODO: remove VCOS_FALSE +- .want_crc = 0 +- }; +- +- LOG_DBG("%s: about to open %i\n", __func__, i); +- status = vchi_service_open(vchi_instance, ¶ms, +- &instance->vchi_handle[i]); ++ params.callback_param = instance, + +- LOG_DBG("%s: opened %i: %p=%d\n", __func__, i, instance->vchi_handle[i], status); +- if (status) { +- LOG_ERR("%s: failed to open VCHI service connection (status=%d)\n", +- __func__, status); +- ret = -EPERM; +- goto err_close_services; +- } +- /* Finished with the service for now */ +- vchi_service_release(instance->vchi_handle[i]); +- } +- +- LOG_DBG("%s: okay\n", __func__); +- return instance; ++ status = vchi_service_open(vchi_instance, ¶ms, ++ &instance->vchi_handle); + +-err_close_services: +- for (i = 0; i < instance->num_connections; i++) { +- LOG_ERR("%s: closing %i: %p\n", __func__, i, instance->vchi_handle[i]); +- if (instance->vchi_handle[i]) +- vchi_service_close(instance->vchi_handle[i]); ++ if (status) { ++ LOG_ERR("%s: failed to open VCHI service connection (status=%d)\n", ++ __func__, status); ++ kfree(instance); ++ return ERR_PTR(-EPERM); + } + +- kfree(instance); +- LOG_ERR("%s: error\n", __func__); ++ /* Finished with the service for now */ ++ vchi_service_release(instance->vchi_handle); + +- return ERR_PTR(ret); ++ return instance; + } + + static int vc_vchi_audio_deinit(struct bcm2835_audio_instance *instance) + { +- unsigned int i; +- +- if (!instance) { +- LOG_ERR("%s: invalid handle %p\n", __func__, instance); +- +- return -1; +- } ++ int status; + +- LOG_DBG(" .. about to lock (%d)\n", instance->num_connections); + mutex_lock(&instance->vchi_mutex); + + /* Close all VCHI service connections */ +- for (i = 0; i < instance->num_connections; i++) { +- int status; +- +- LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]); +- vchi_service_use(instance->vchi_handle[i]); ++ vchi_service_use(instance->vchi_handle); + +- status = vchi_service_close(instance->vchi_handle[i]); +- if (status) { +- LOG_DBG("%s: failed to close VCHI service connection (status=%d)\n", +- __func__, status); +- } ++ status = vchi_service_close(instance->vchi_handle); ++ if (status) { ++ LOG_DBG("%s: failed to close VCHI service connection (status=%d)\n", ++ __func__, status); + } + + mutex_unlock(&instance->vchi_mutex); +@@ -383,19 +341,9 @@ static int bcm2835_audio_open_connection + (struct bcm2835_audio_instance *)alsa_stream->instance; + struct bcm2835_vchi_ctx *vhci_ctx = alsa_stream->chip->vchi_ctx; + +- LOG_INFO("%s: start\n", __func__); +- BUG_ON(instance); +- if (instance) { +- LOG_ERR("%s: VCHI instance already open (%p)\n", +- __func__, instance); +- instance->alsa_stream = alsa_stream; +- alsa_stream->instance = instance; +- return 0; +- } +- + /* Initialize an instance of the audio service */ + instance = vc_vchi_audio_init(vhci_ctx->vchi_instance, +- &vhci_ctx->vchi_connection, 1); ++ vhci_ctx->vchi_connection); + + if (IS_ERR(instance)) { + LOG_ERR("%s: failed to initialize audio service\n", __func__); +@@ -407,8 +355,6 @@ static int bcm2835_audio_open_connection + instance->alsa_stream = alsa_stream; + alsa_stream->instance = instance; + +- LOG_DBG(" success !\n"); +- + return 0; + } + +@@ -431,12 +377,12 @@ int bcm2835_audio_open(struct bcm2835_al + LOG_DBG(" instance (%p)\n", instance); + + mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle[0]); ++ vchi_service_use(instance->vchi_handle); + + m.type = VC_AUDIO_MSG_TYPE_OPEN; + + /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], ++ status = bcm2835_vchi_msg_queue(instance->vchi_handle, + &m, sizeof(m)); + + if (status) { +@@ -450,7 +396,7 @@ int bcm2835_audio_open(struct bcm2835_al + ret = 0; + + unlock: +- vchi_service_release(instance->vchi_handle[0]); ++ vchi_service_release(instance->vchi_handle); + mutex_unlock(&instance->vchi_mutex); + + free_wq: +@@ -472,7 +418,7 @@ int bcm2835_audio_set_ctls(struct bcm283 + chip->dest, chip->volume); + + mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle[0]); ++ vchi_service_use(instance->vchi_handle); + + instance->result = -1; + +@@ -487,7 +433,7 @@ int bcm2835_audio_set_ctls(struct bcm283 + init_completion(&instance->msg_avail_comp); + + /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], ++ status = bcm2835_vchi_msg_queue(instance->vchi_handle, + &m, sizeof(m)); + + if (status) { +@@ -511,7 +457,7 @@ int bcm2835_audio_set_ctls(struct bcm283 + ret = 0; + + unlock: +- vchi_service_release(instance->vchi_handle[0]); ++ vchi_service_release(instance->vchi_handle); + mutex_unlock(&instance->vchi_mutex); + + return ret; +@@ -537,7 +483,7 @@ int bcm2835_audio_set_params(struct bcm2 + } + + mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle[0]); ++ vchi_service_use(instance->vchi_handle); + + instance->result = -1; + +@@ -550,7 +496,7 @@ int bcm2835_audio_set_params(struct bcm2 + init_completion(&instance->msg_avail_comp); + + /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], ++ status = bcm2835_vchi_msg_queue(instance->vchi_handle, + &m, sizeof(m)); + + if (status) { +@@ -574,7 +520,7 @@ int bcm2835_audio_set_params(struct bcm2 + ret = 0; + + unlock: +- vchi_service_release(instance->vchi_handle[0]); ++ vchi_service_release(instance->vchi_handle); + mutex_unlock(&instance->vchi_mutex); + + return ret; +@@ -588,12 +534,12 @@ static int bcm2835_audio_start_worker(st + int ret; + + mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle[0]); ++ vchi_service_use(instance->vchi_handle); + + m.type = VC_AUDIO_MSG_TYPE_START; + + /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], ++ status = bcm2835_vchi_msg_queue(instance->vchi_handle, + &m, sizeof(m)); + + if (status) { +@@ -607,7 +553,7 @@ static int bcm2835_audio_start_worker(st + ret = 0; + + unlock: +- vchi_service_release(instance->vchi_handle[0]); ++ vchi_service_release(instance->vchi_handle); + mutex_unlock(&instance->vchi_mutex); + return ret; + } +@@ -620,13 +566,13 @@ static int bcm2835_audio_stop_worker(str + int ret; + + mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle[0]); ++ vchi_service_use(instance->vchi_handle); + + m.type = VC_AUDIO_MSG_TYPE_STOP; + m.u.stop.draining = alsa_stream->draining; + + /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], ++ status = bcm2835_vchi_msg_queue(instance->vchi_handle, + &m, sizeof(m)); + + if (status) { +@@ -640,7 +586,7 @@ static int bcm2835_audio_stop_worker(str + ret = 0; + + unlock: +- vchi_service_release(instance->vchi_handle[0]); ++ vchi_service_release(instance->vchi_handle); + mutex_unlock(&instance->vchi_mutex); + return ret; + } +@@ -655,7 +601,7 @@ int bcm2835_audio_close(struct bcm2835_a + my_workqueue_quit(alsa_stream); + + mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle[0]); ++ vchi_service_use(instance->vchi_handle); + + m.type = VC_AUDIO_MSG_TYPE_CLOSE; + +@@ -663,7 +609,7 @@ int bcm2835_audio_close(struct bcm2835_a + init_completion(&instance->msg_avail_comp); + + /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], ++ status = bcm2835_vchi_msg_queue(instance->vchi_handle, + &m, sizeof(m)); + + if (status) { +@@ -687,7 +633,7 @@ int bcm2835_audio_close(struct bcm2835_a + ret = 0; + + unlock: +- vchi_service_release(instance->vchi_handle[0]); ++ vchi_service_release(instance->vchi_handle); + mutex_unlock(&instance->vchi_mutex); + + /* Stop the audio service */ +@@ -708,10 +654,10 @@ static int bcm2835_audio_write_worker(st + LOG_INFO(" Writing %d bytes from %p\n", count, src); + + mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle[0]); ++ vchi_service_use(instance->vchi_handle); + + if (instance->peer_version == 0 && +- vchi_get_peer_version(instance->vchi_handle[0], &instance->peer_version) == 0) ++ vchi_get_peer_version(instance->vchi_handle, &instance->peer_version) == 0) + LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version); + + m.type = VC_AUDIO_MSG_TYPE_WRITE; +@@ -723,7 +669,7 @@ static int bcm2835_audio_write_worker(st + m.u.write.silence = src == NULL; + + /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], ++ status = bcm2835_vchi_msg_queue(instance->vchi_handle, + &m, sizeof(m)); + + if (status) { +@@ -736,7 +682,7 @@ static int bcm2835_audio_write_worker(st + if (!m.u.write.silence) { + if (!m.u.write.max_packet) { + /* Send the message to the videocore */ +- status = vchi_bulk_queue_transmit(instance->vchi_handle[0], ++ status = vchi_bulk_queue_transmit(instance->vchi_handle, + src, count, + 0 * VCHI_FLAGS_BLOCK_UNTIL_QUEUED + + +@@ -746,7 +692,7 @@ static int bcm2835_audio_write_worker(st + while (count > 0) { + int bytes = min_t(int, m.u.write.max_packet, count); + +- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], ++ status = bcm2835_vchi_msg_queue(instance->vchi_handle, + src, bytes); + src = (char *)src + bytes; + count -= bytes; +@@ -763,7 +709,7 @@ static int bcm2835_audio_write_worker(st + ret = 0; + + unlock: +- vchi_service_release(instance->vchi_handle[0]); ++ vchi_service_release(instance->vchi_handle); + mutex_unlock(&instance->vchi_mutex); + return ret; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0409-ASoC-tlv320aic32x4-Only-enable-with-common-clock.patch b/target/linux/brcm2708/patches-4.19/950-0409-ASoC-tlv320aic32x4-Only-enable-with-common-clock.patch deleted file mode 100644 index a27e720b82..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0409-ASoC-tlv320aic32x4-Only-enable-with-common-clock.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 0ef20f96802fac1ce888a1e0b56e14b6b3fd4f72 Mon Sep 17 00:00:00 2001 -From: Mark Brown -Date: Tue, 26 Mar 2019 13:10:13 +0000 -Subject: [PATCH 409/806] ASoC: tlv320aic32x4: Only enable with common clock - -commit 64f01d2b5ccc621c3aa66b82daf9154f5581f36a upstream. - -Some architectures do not yet support the common clock API at all but -the tlv320aic32x4 driver now requires it. - -Reported-by: Stephen Rothwell -Signed-off-by: Mark Brown ---- - sound/soc/codecs/Kconfig | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/sound/soc/codecs/Kconfig -+++ b/sound/soc/codecs/Kconfig -@@ -170,8 +170,8 @@ config SND_SOC_ALL_CODECS - select SND_SOC_TAS5713 if I2C - select SND_SOC_TLV320AIC26 if SPI_MASTER - select SND_SOC_TLV320AIC31XX if I2C -- select SND_SOC_TLV320AIC32X4_I2C if I2C -- select SND_SOC_TLV320AIC32X4_SPI if SPI_MASTER -+ select SND_SOC_TLV320AIC32X4_I2C if I2C && COMMON_CLK -+ select SND_SOC_TLV320AIC32X4_SPI if SPI_MASTER && COMMON_CLK - select SND_SOC_TLV320AIC3X if I2C - select SND_SOC_TPA6130A2 if I2C - select SND_SOC_TLV320DAC33 if I2C -@@ -1030,11 +1030,13 @@ config SND_SOC_TLV320AIC32X4 - config SND_SOC_TLV320AIC32X4_I2C - tristate "Texas Instruments TLV320AIC32x4 audio CODECs - I2C" - depends on I2C -+ depends on COMMON_CLK - select SND_SOC_TLV320AIC32X4 - - config SND_SOC_TLV320AIC32X4_SPI - tristate "Texas Instruments TLV320AIC32x4 audio CODECs - SPI" - depends on SPI_MASTER -+ depends on COMMON_CLK - select SND_SOC_TLV320AIC32X4 - - config SND_SOC_TLV320AIC3X diff --git a/target/linux/brcm2708/patches-4.19/950-0409-staging-bcm2835-audio-Code-refactoring-of-vchiq-acce.patch b/target/linux/brcm2708/patches-4.19/950-0409-staging-bcm2835-audio-Code-refactoring-of-vchiq-acce.patch new file mode 100644 index 0000000000..37ebd8b673 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0409-staging-bcm2835-audio-Code-refactoring-of-vchiq-acce.patch @@ -0,0 +1,575 @@ +From 43f89ac74f3f221e3036a1ec311b24016860d15e Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:48 +0200 +Subject: [PATCH] staging: bcm2835-audio: Code refactoring of vchiq + accessor codes + +commit 769a8e9bf5cf39813f52962fdafdf7e4d52ad585 upstream. + +This is a cleanup and code refactoring in bcm2835-vchiq.c. + +The major code changes are to provide local helpers for easier use of +lock / unlock, and message passing with/without response wait. This +allows us to reduce lots of open codes. + +Also, the max packet is set at opening the stream, not at each time +when the write gets called. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../bcm2835-audio/bcm2835-vchiq.c | 440 ++++++------------ + 1 file changed, 142 insertions(+), 298 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -49,6 +49,7 @@ struct bcm2835_audio_instance { + struct mutex vchi_mutex; + struct bcm2835_alsa_stream *alsa_stream; + int result; ++ unsigned int max_packet; + short peer_version; + }; + +@@ -65,16 +66,68 @@ static int bcm2835_audio_start_worker(st + static int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream, + unsigned int count, void *src); + +-// Routine to send a message across a service ++static void bcm2835_audio_lock(struct bcm2835_audio_instance *instance) ++{ ++ mutex_lock(&instance->vchi_mutex); ++ vchi_service_use(instance->vchi_handle); ++} ++ ++static void bcm2835_audio_unlock(struct bcm2835_audio_instance *instance) ++{ ++ vchi_service_release(instance->vchi_handle); ++ mutex_unlock(&instance->vchi_mutex); ++} ++ ++static int bcm2835_audio_send_msg_locked(struct bcm2835_audio_instance *instance, ++ struct vc_audio_msg *m, bool wait) ++{ ++ int status; ++ ++ if (wait) { ++ instance->result = -1; ++ init_completion(&instance->msg_avail_comp); ++ } ++ ++ status = vchi_queue_kernel_message(instance->vchi_handle, ++ m, sizeof(*m)); ++ if (status) { ++ LOG_ERR("vchi message queue failed: %d, msg=%d\n", ++ status, m->type); ++ return -EIO; ++ } ++ ++ if (wait) { ++ if (!wait_for_completion_timeout(&instance->msg_avail_comp, ++ msecs_to_jiffies(10 * 1000))) { ++ LOG_ERR("vchi message timeout, msg=%d\n", m->type); ++ return -ETIMEDOUT; ++ } else if (instance->result) { ++ LOG_ERR("vchi message response error:%d, msg=%d\n", ++ instance->result, m->type); ++ return -EIO; ++ } ++ } ++ ++ return 0; ++} + +-static int +-bcm2835_vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle, +- void *data, +- unsigned int size) +-{ +- return vchi_queue_kernel_message(handle, +- data, +- size); ++static int bcm2835_audio_send_msg(struct bcm2835_audio_instance *instance, ++ struct vc_audio_msg *m, bool wait) ++{ ++ int err; ++ ++ bcm2835_audio_lock(instance); ++ err = bcm2835_audio_send_msg_locked(instance, m, wait); ++ bcm2835_audio_unlock(instance); ++ return err; ++} ++ ++static int bcm2835_audio_send_simple(struct bcm2835_audio_instance *instance, ++ int type, bool wait) ++{ ++ struct vc_audio_msg m = { .type = type }; ++ ++ return bcm2835_audio_send_msg(instance, &m, wait); + } + + static const u32 BCM2835_AUDIO_WRITE_COOKIE1 = ('B' << 24 | 'C' << 16 | +@@ -283,10 +336,9 @@ static int vc_vchi_audio_deinit(struct b + int status; + + mutex_lock(&instance->vchi_mutex); +- +- /* Close all VCHI service connections */ + vchi_service_use(instance->vchi_handle); + ++ /* Close all VCHI service connections */ + status = vchi_service_close(instance->vchi_handle); + if (status) { + LOG_DBG("%s: failed to close VCHI service connection (status=%d)\n", +@@ -345,12 +397,8 @@ static int bcm2835_audio_open_connection + instance = vc_vchi_audio_init(vhci_ctx->vchi_instance, + vhci_ctx->vchi_connection); + +- if (IS_ERR(instance)) { +- LOG_ERR("%s: failed to initialize audio service\n", __func__); +- +- /* vchi_instance is retained for use the next time. */ ++ if (IS_ERR(instance)) + return PTR_ERR(instance); +- } + + instance->alsa_stream = alsa_stream; + alsa_stream->instance = instance; +@@ -361,66 +409,44 @@ static int bcm2835_audio_open_connection + int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream) + { + struct bcm2835_audio_instance *instance; +- struct vc_audio_msg m; +- int status; +- int ret; ++ int err; + + alsa_stream->my_wq = alloc_workqueue("my_queue", WQ_HIGHPRI, 1); + if (!alsa_stream->my_wq) + return -ENOMEM; + +- ret = bcm2835_audio_open_connection(alsa_stream); +- if (ret) ++ err = bcm2835_audio_open_connection(alsa_stream); ++ if (err < 0) + goto free_wq; + + instance = alsa_stream->instance; +- LOG_DBG(" instance (%p)\n", instance); +- +- mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle); +- +- m.type = VC_AUDIO_MSG_TYPE_OPEN; +- +- /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle, +- &m, sizeof(m)); +- +- if (status) { +- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", +- __func__, status); +- +- ret = -1; +- goto unlock; +- } +- +- ret = 0; + +-unlock: +- vchi_service_release(instance->vchi_handle); +- mutex_unlock(&instance->vchi_mutex); ++ err = bcm2835_audio_send_simple(instance, VC_AUDIO_MSG_TYPE_OPEN, ++ false); ++ if (err < 0) ++ goto deinit; ++ ++ bcm2835_audio_lock(instance); ++ vchi_get_peer_version(instance->vchi_handle, &instance->peer_version); ++ bcm2835_audio_unlock(instance); ++ if (instance->peer_version < 2 || force_bulk) ++ instance->max_packet = 0; /* bulk transfer */ ++ else ++ instance->max_packet = 4000; + +-free_wq: +- if (ret) +- destroy_workqueue(alsa_stream->my_wq); ++ return 0; + +- return ret; ++ deinit: ++ vc_vchi_audio_deinit(instance); ++ free_wq: ++ destroy_workqueue(alsa_stream->my_wq); ++ return err; + } + + int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream) + { +- struct vc_audio_msg m; +- struct bcm2835_audio_instance *instance = alsa_stream->instance; + struct bcm2835_chip *chip = alsa_stream->chip; +- int status; +- int ret; +- +- LOG_INFO(" Setting ALSA dest(%d), volume(%d)\n", +- chip->dest, chip->volume); +- +- mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle); +- +- instance->result = -1; ++ struct vc_audio_msg m = {}; + + m.type = VC_AUDIO_MSG_TYPE_CONTROL; + m.u.control.dest = chip->dest; +@@ -429,289 +455,107 @@ int bcm2835_audio_set_ctls(struct bcm283 + else + m.u.control.volume = alsa2chip(chip->volume); + +- /* Create the message available completion */ +- init_completion(&instance->msg_avail_comp); +- +- /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle, +- &m, sizeof(m)); +- +- if (status) { +- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", +- __func__, status); +- +- ret = -1; +- goto unlock; +- } +- +- /* We are expecting a reply from the videocore */ +- wait_for_completion(&instance->msg_avail_comp); +- +- if (instance->result) { +- LOG_ERR("%s: result=%d\n", __func__, instance->result); +- +- ret = -1; +- goto unlock; +- } +- +- ret = 0; +- +-unlock: +- vchi_service_release(instance->vchi_handle); +- mutex_unlock(&instance->vchi_mutex); +- +- return ret; ++ return bcm2835_audio_send_msg(alsa_stream->instance, &m, true); + } + + int bcm2835_audio_set_params(struct bcm2835_alsa_stream *alsa_stream, + unsigned int channels, unsigned int samplerate, + unsigned int bps) + { +- struct vc_audio_msg m; +- struct bcm2835_audio_instance *instance = alsa_stream->instance; +- int status; +- int ret; +- +- LOG_INFO(" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n", +- channels, samplerate, bps); ++ struct vc_audio_msg m = { ++ .type = VC_AUDIO_MSG_TYPE_CONFIG, ++ .u.config.channels = channels, ++ .u.config.samplerate = samplerate, ++ .u.config.bps = bps, ++ }; ++ int err; + + /* resend ctls - alsa_stream may not have been open when first send */ +- ret = bcm2835_audio_set_ctls(alsa_stream); +- if (ret) { +- LOG_ERR(" Alsa controls not supported\n"); +- return -EINVAL; +- } ++ err = bcm2835_audio_set_ctls(alsa_stream); ++ if (err) ++ return err; + +- mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle); +- +- instance->result = -1; +- +- m.type = VC_AUDIO_MSG_TYPE_CONFIG; +- m.u.config.channels = channels; +- m.u.config.samplerate = samplerate; +- m.u.config.bps = bps; +- +- /* Create the message available completion */ +- init_completion(&instance->msg_avail_comp); +- +- /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle, +- &m, sizeof(m)); +- +- if (status) { +- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", +- __func__, status); +- +- ret = -1; +- goto unlock; +- } +- +- /* We are expecting a reply from the videocore */ +- wait_for_completion(&instance->msg_avail_comp); +- +- if (instance->result) { +- LOG_ERR("%s: result=%d", __func__, instance->result); +- +- ret = -1; +- goto unlock; +- } +- +- ret = 0; +- +-unlock: +- vchi_service_release(instance->vchi_handle); +- mutex_unlock(&instance->vchi_mutex); +- +- return ret; ++ return bcm2835_audio_send_msg(alsa_stream->instance, &m, true); + } + + static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream) + { +- struct vc_audio_msg m; +- struct bcm2835_audio_instance *instance = alsa_stream->instance; +- int status; +- int ret; +- +- mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle); +- +- m.type = VC_AUDIO_MSG_TYPE_START; +- +- /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle, +- &m, sizeof(m)); +- +- if (status) { +- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", +- __func__, status); +- +- ret = -1; +- goto unlock; +- } +- +- ret = 0; +- +-unlock: +- vchi_service_release(instance->vchi_handle); +- mutex_unlock(&instance->vchi_mutex); +- return ret; ++ return bcm2835_audio_send_simple(alsa_stream->instance, ++ VC_AUDIO_MSG_TYPE_START, false); + } + + static int bcm2835_audio_stop_worker(struct bcm2835_alsa_stream *alsa_stream) + { +- struct vc_audio_msg m; +- struct bcm2835_audio_instance *instance = alsa_stream->instance; +- int status; +- int ret; +- +- mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle); +- +- m.type = VC_AUDIO_MSG_TYPE_STOP; +- m.u.stop.draining = alsa_stream->draining; +- +- /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle, +- &m, sizeof(m)); +- +- if (status) { +- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", +- __func__, status); +- +- ret = -1; +- goto unlock; +- } +- +- ret = 0; +- +-unlock: +- vchi_service_release(instance->vchi_handle); +- mutex_unlock(&instance->vchi_mutex); +- return ret; ++ return bcm2835_audio_send_simple(alsa_stream->instance, ++ VC_AUDIO_MSG_TYPE_STOP, false); + } + + int bcm2835_audio_close(struct bcm2835_alsa_stream *alsa_stream) + { +- struct vc_audio_msg m; + struct bcm2835_audio_instance *instance = alsa_stream->instance; +- int status; +- int ret; ++ int err; + + my_workqueue_quit(alsa_stream); + +- mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle); +- +- m.type = VC_AUDIO_MSG_TYPE_CLOSE; +- +- /* Create the message available completion */ +- init_completion(&instance->msg_avail_comp); +- +- /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle, +- &m, sizeof(m)); +- +- if (status) { +- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", +- __func__, status); +- ret = -1; +- goto unlock; +- } +- +- /* We are expecting a reply from the videocore */ +- wait_for_completion(&instance->msg_avail_comp); +- +- if (instance->result) { +- LOG_ERR("%s: failed result (result=%d)\n", +- __func__, instance->result); +- +- ret = -1; +- goto unlock; +- } +- +- ret = 0; +- +-unlock: +- vchi_service_release(instance->vchi_handle); +- mutex_unlock(&instance->vchi_mutex); ++ err = bcm2835_audio_send_simple(alsa_stream->instance, ++ VC_AUDIO_MSG_TYPE_CLOSE, true); + + /* Stop the audio service */ + vc_vchi_audio_deinit(instance); + alsa_stream->instance = NULL; + +- return ret; ++ return err; + } + + static int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream, +- unsigned int count, void *src) ++ unsigned int size, void *src) + { +- struct vc_audio_msg m; + struct bcm2835_audio_instance *instance = alsa_stream->instance; +- int status; +- int ret; +- +- LOG_INFO(" Writing %d bytes from %p\n", count, src); +- +- mutex_lock(&instance->vchi_mutex); +- vchi_service_use(instance->vchi_handle); ++ struct vc_audio_msg m = { ++ .type = VC_AUDIO_MSG_TYPE_WRITE, ++ .u.write.count = size, ++ .u.write.max_packet = instance->max_packet, ++ .u.write.cookie1 = BCM2835_AUDIO_WRITE_COOKIE1, ++ .u.write.cookie2 = BCM2835_AUDIO_WRITE_COOKIE2, ++ }; ++ unsigned int count; ++ int err, status; + +- if (instance->peer_version == 0 && +- vchi_get_peer_version(instance->vchi_handle, &instance->peer_version) == 0) +- LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version); +- +- m.type = VC_AUDIO_MSG_TYPE_WRITE; +- m.u.write.count = count; +- // old version uses bulk, new version uses control +- m.u.write.max_packet = instance->peer_version < 2 || force_bulk ? 0 : 4000; +- m.u.write.cookie1 = BCM2835_AUDIO_WRITE_COOKIE1; +- m.u.write.cookie2 = BCM2835_AUDIO_WRITE_COOKIE2; +- m.u.write.silence = src == NULL; +- +- /* Send the message to the videocore */ +- status = bcm2835_vchi_msg_queue(instance->vchi_handle, +- &m, sizeof(m)); ++ if (!size) ++ return 0; + +- if (status) { +- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", +- __func__, status); +- +- ret = -1; ++ bcm2835_audio_lock(instance); ++ err = bcm2835_audio_send_msg_locked(instance, &m, false); ++ if (err < 0) + goto unlock; +- } +- if (!m.u.write.silence) { +- if (!m.u.write.max_packet) { +- /* Send the message to the videocore */ +- status = vchi_bulk_queue_transmit(instance->vchi_handle, +- src, count, +- 0 * VCHI_FLAGS_BLOCK_UNTIL_QUEUED +- + +- 1 * VCHI_FLAGS_BLOCK_UNTIL_DATA_READ, +- NULL); +- } else { +- while (count > 0) { +- int bytes = min_t(int, m.u.write.max_packet, count); + +- status = bcm2835_vchi_msg_queue(instance->vchi_handle, +- src, bytes); +- src = (char *)src + bytes; +- count -= bytes; +- } +- } +- if (status) { +- LOG_ERR("%s: failed on vchi_bulk_queue_transmit (status=%d)\n", +- __func__, status); ++ count = size; ++ if (!instance->max_packet) { ++ /* Send the message to the videocore */ ++ status = vchi_bulk_queue_transmit(instance->vchi_handle, ++ src, count, ++ VCHI_FLAGS_BLOCK_UNTIL_DATA_READ, ++ NULL); ++ } else { ++ while (count > 0) { ++ int bytes = min(instance->max_packet, count); + +- ret = -1; +- goto unlock; ++ status = vchi_queue_kernel_message(instance->vchi_handle, ++ src, bytes); ++ src += bytes; ++ count -= bytes; + } + } +- ret = 0; + +-unlock: +- vchi_service_release(instance->vchi_handle); +- mutex_unlock(&instance->vchi_mutex); +- return ret; ++ if (status) { ++ LOG_ERR("failed on %d bytes transfer (status=%d)\n", ++ size, status); ++ err = -EIO; ++ } ++ ++ unlock: ++ bcm2835_audio_unlock(instance); ++ return err; + } + + unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream) diff --git a/target/linux/brcm2708/patches-4.19/950-0410-Audiophonics-I-Sabre-9038Q2M-DAC-driver.patch b/target/linux/brcm2708/patches-4.19/950-0410-Audiophonics-I-Sabre-9038Q2M-DAC-driver.patch deleted file mode 100644 index 1532461cdb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0410-Audiophonics-I-Sabre-9038Q2M-DAC-driver.patch +++ /dev/null @@ -1,761 +0,0 @@ -From c667b06f616d5dec68469ac73764abd5bcb1d694 Mon Sep 17 00:00:00 2001 -From: FERHAT Nicolas -Date: Fri, 5 Apr 2019 13:06:42 +0100 -Subject: [PATCH 410/806] Audiophonics I-Sabre 9038Q2M DAC driver - -Signed-off-by: Audiophonics ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 + - .../boot/dts/overlays/i-sabre-q2m-overlay.dts | 39 ++ - sound/soc/bcm/Kconfig | 7 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/i-sabre-q2m.c | 157 +++++++ - sound/soc/codecs/Kconfig | 5 + - sound/soc/codecs/Makefile | 2 + - sound/soc/codecs/i-sabre-codec.c | 392 ++++++++++++++++++ - sound/soc/codecs/i-sabre-codec.h | 42 ++ - 13 files changed, 656 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts - create mode 100644 sound/soc/bcm/i-sabre-q2m.c - create mode 100644 sound/soc/codecs/i-sabre-codec.c - create mode 100644 sound/soc/codecs/i-sabre-codec.h - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -55,6 +55,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - hy28a.dtbo \ - hy28b.dtbo \ - hy28b-2017.dtbo \ -+ i-sabre-q2m.dtbo \ - i2c-bcm2708.dtbo \ - i2c-gpio.dtbo \ - i2c-mux.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -869,6 +869,12 @@ Params: speed Display - ledgpio GPIO used to control backlight - - -+Name: i-sabre-q2m -+Info: Configures the Audiophonics I-SABRE Q2M DAC -+Load: dtoverlay=i-sabre-q2m -+Params: -+ -+ - Name: i2c-bcm2708 - Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus. - Load: dtoverlay=i2c-bcm2708 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for I-Sabre Q2M -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&sound>; -+ frag0: __overlay__ { -+ compatible = "audiophonics,i-sabre-q2m"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ i-sabre-codec@48 { -+ #sound-dai-cells = <0>; -+ compatible = "audiophonics,i-sabre-codec"; -+ reg = <0x48>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -123,6 +123,13 @@ config SND_BCM2708_SOC_IQAUDIO_DIGI - help - Say Y or M if you want to add support for IQAudIO Digital IO board. - -+config SND_BCM2708_SOC_I_SABRE_Q2M -+ tristate "Support for Audiophonics I-Sabre Q2M DAC" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_I_SABRE_CODEC -+ help -+ Say Y or M if you want to add support for Audiophonics I-SABRE Q2M DAC -+ - config SND_BCM2708_SOC_ADAU1977_ADC - tristate "Support for ADAU1977 ADC" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -19,6 +19,7 @@ snd-soc-justboom-dac-objs := justboom-da - snd-soc-rpi-cirrus-objs := rpi-cirrus.o - snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o -+ snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o - snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o - snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o - snd-soc-audiosense-pi-objs := audiosense-pi.o -@@ -42,6 +43,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DA - obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o -+ obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o - obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o - obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o - obj-$(CONFIG_SND_AUDIOSENSE_PI) += snd-soc-audiosense-pi.o ---- /dev/null -+++ b/sound/soc/bcm/i-sabre-q2m.c -@@ -0,0 +1,157 @@ -+/* -+ * ASoC Driver for I-Sabre Q2M -+ * -+ * Author: Satoru Kawase -+ * Modified by: Xiao Qingyong -+ * Update kernel v4.18+ by : Audiophonics -+ * Copyright 2018 Audiophonics -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/i-sabre-codec.h" -+ -+ -+static int snd_rpi_i_sabre_q2m_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_component *component = rtd->codec_dai->component; -+ unsigned int value; -+ -+ /* Device ID */ -+ value = snd_soc_component_read32(component, ISABRECODEC_REG_01); -+ dev_info(component->card->dev, "Audiophonics Device ID : %02X\n", value); -+ -+ /* API revision */ -+ value = snd_soc_component_read32(component, ISABRECODEC_REG_02); -+ dev_info(component->card->dev, "Audiophonics API revision : %02X\n", value); -+ -+ return 0; -+} -+ -+static int snd_rpi_i_sabre_q2m_hw_params( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ int bclk_ratio; -+ -+ bclk_ratio = snd_pcm_format_physical_width( -+ params_format(params)) * params_channels(params); -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, bclk_ratio); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_i_sabre_q2m_ops = { -+ .hw_params = snd_rpi_i_sabre_q2m_hw_params, -+}; -+ -+ -+static struct snd_soc_dai_link snd_rpi_i_sabre_q2m_dai[] = { -+ { -+ .name = "I-Sabre Q2M", -+ .stream_name = "I-Sabre Q2M DAC", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "i-sabre-codec-dai", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "i-sabre-codec-i2c.1-0048", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBS_CFS, -+ .init = snd_rpi_i_sabre_q2m_init, -+ .ops = &snd_rpi_i_sabre_q2m_ops, -+ } -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_i_sabre_q2m = { -+ .name = "I-Sabre Q2M DAC", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_i_sabre_q2m_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_i_sabre_q2m_dai) -+}; -+ -+ -+static int snd_rpi_i_sabre_q2m_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_i_sabre_q2m.dev = &pdev->dev; -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai; -+ -+ dai = &snd_rpi_i_sabre_q2m_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } else { -+ dev_err(&pdev->dev, -+ "Property 'i2s-controller' missing or invalid\n"); -+ return (-EINVAL); -+ } -+ -+ dai->name = "I-Sabre Q2M"; -+ dai->stream_name = "I-Sabre Q2M DAC"; -+ dai->dai_fmt = SND_SOC_DAIFMT_I2S -+ | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBS_CFS; -+ } -+ -+ /* Wait for registering codec driver */ -+ mdelay(50); -+ -+ ret = snd_soc_register_card(&snd_rpi_i_sabre_q2m); -+ if (ret) { -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ } -+ -+ return ret; -+} -+ -+static int snd_rpi_i_sabre_q2m_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_i_sabre_q2m); -+} -+ -+static const struct of_device_id snd_rpi_i_sabre_q2m_of_match[] = { -+ { .compatible = "audiophonics,i-sabre-q2m", }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_i_sabre_q2m_of_match); -+ -+static struct platform_driver snd_rpi_i_sabre_q2m_driver = { -+ .driver = { -+ .name = "snd-rpi-i-sabre-q2m", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_i_sabre_q2m_of_match, -+ }, -+ .probe = snd_rpi_i_sabre_q2m_probe, -+ .remove = snd_rpi_i_sabre_q2m_remove, -+}; -+module_platform_driver(snd_rpi_i_sabre_q2m_driver); -+ -+MODULE_DESCRIPTION("ASoC Driver for I-Sabre Q2M"); -+MODULE_AUTHOR("Audiophonics "); -+MODULE_LICENSE("GPL"); ---- a/sound/soc/codecs/Kconfig -+++ b/sound/soc/codecs/Kconfig -@@ -85,6 +85,7 @@ config SND_SOC_ALL_CODECS - select SND_SOC_ICS43432 - select SND_SOC_INNO_RK3036 - select SND_SOC_ISABELLE if I2C -+ select SND_SOC_I_SABRE_CODEC if I2C - select SND_SOC_JZ4740_CODEC - select SND_SOC_LM4857 if I2C - select SND_SOC_LM49453 if I2C -@@ -1322,4 +1323,8 @@ config SND_SOC_TPA6130A2 - tristate "Texas Instruments TPA6130A2 headphone amplifier" - depends on I2C - -+config SND_SOC_I_SABRE_CODEC -+ tristate "Audiophonics I-SABRE Codec" -+ depends on I2C -+ - endmenu ---- a/sound/soc/codecs/Makefile -+++ b/sound/soc/codecs/Makefile -@@ -81,6 +81,7 @@ snd-soc-hdac-hdmi-objs := hdac_hdmi.o - snd-soc-ics43432-objs := ics43432.o - snd-soc-inno-rk3036-objs := inno_rk3036.o - snd-soc-isabelle-objs := isabelle.o -+snd-soc-i-sabre-codec-objs := i-sabre-codec.o - snd-soc-jz4740-codec-objs := jz4740.o - snd-soc-l3-objs := l3.o - snd-soc-lm4857-objs := lm4857.o -@@ -343,6 +344,7 @@ obj-$(CONFIG_SND_SOC_HDAC_HDMI) += snd-s - obj-$(CONFIG_SND_SOC_ICS43432) += snd-soc-ics43432.o - obj-$(CONFIG_SND_SOC_INNO_RK3036) += snd-soc-inno-rk3036.o - obj-$(CONFIG_SND_SOC_ISABELLE) += snd-soc-isabelle.o -+obj-$(CONFIG_SND_SOC_I_SABRE_CODEC) += snd-soc-i-sabre-codec.o - obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o - obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o - obj-$(CONFIG_SND_SOC_LM4857) += snd-soc-lm4857.o ---- /dev/null -+++ b/sound/soc/codecs/i-sabre-codec.c -@@ -0,0 +1,392 @@ -+/* -+ * Driver for I-Sabre Q2M -+ * -+ * Author: Satoru Kawase -+ * Modified by: Xiao Qingyong -+ * Modified by: JC BARBAUD (Mute) -+ * Update kernel v4.18+ by : Audiophonics -+ * Copyright 2018 Audiophonics -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "i-sabre-codec.h" -+ -+ -+/* I-Sabre Q2M Codec Private Data */ -+struct i_sabre_codec_priv { -+ struct regmap *regmap; -+ unsigned int fmt; -+}; -+ -+ -+/* I-Sabre Q2M Codec Default Register Value */ -+static const struct reg_default i_sabre_codec_reg_defaults[] = { -+ { ISABRECODEC_REG_10, 0x00 }, -+ { ISABRECODEC_REG_20, 0x00 }, -+ { ISABRECODEC_REG_21, 0x00 }, -+ { ISABRECODEC_REG_22, 0x00 }, -+ { ISABRECODEC_REG_24, 0x00 }, -+}; -+ -+ -+static bool i_sabre_codec_writeable(struct device *dev, unsigned int reg) -+{ -+ switch (reg) { -+ case ISABRECODEC_REG_10: -+ case ISABRECODEC_REG_20: -+ case ISABRECODEC_REG_21: -+ case ISABRECODEC_REG_22: -+ case ISABRECODEC_REG_24: -+ return true; -+ -+ default: -+ return false; -+ } -+} -+ -+static bool i_sabre_codec_readable(struct device *dev, unsigned int reg) -+{ -+ switch (reg) { -+ case ISABRECODEC_REG_01: -+ case ISABRECODEC_REG_02: -+ case ISABRECODEC_REG_10: -+ case ISABRECODEC_REG_20: -+ case ISABRECODEC_REG_21: -+ case ISABRECODEC_REG_22: -+ case ISABRECODEC_REG_24: -+ return true; -+ -+ default: -+ return false; -+ } -+} -+ -+static bool i_sabre_codec_volatile(struct device *dev, unsigned int reg) -+{ -+ switch (reg) { -+ case ISABRECODEC_REG_01: -+ case ISABRECODEC_REG_02: -+ return true; -+ -+ default: -+ return false; -+ } -+} -+ -+ -+/* Volume Scale */ -+static const DECLARE_TLV_DB_SCALE(volume_tlv, -10000, 100, 0); -+ -+ -+/* Filter Type */ -+static const char * const fir_filter_type_texts[] = { -+ "brick wall", -+ "corrected minimum phase fast", -+ "minimum phase slow", -+ "minimum phase fast", -+ "linear phase slow", -+ "linear phase fast", -+ "apodizing fast", -+}; -+ -+static SOC_ENUM_SINGLE_DECL(i_sabre_fir_filter_type_enum, -+ ISABRECODEC_REG_22, 0, fir_filter_type_texts); -+ -+ -+/* I2S / SPDIF Select */ -+static const char * const iis_spdif_sel_texts[] = { -+ "I2S", -+ "SPDIF", -+}; -+ -+static SOC_ENUM_SINGLE_DECL(i_sabre_iis_spdif_sel_enum, -+ ISABRECODEC_REG_24, 0, iis_spdif_sel_texts); -+ -+ -+/* Control */ -+static const struct snd_kcontrol_new i_sabre_codec_controls[] = { -+SOC_SINGLE_RANGE_TLV("Digital Playback Volume", ISABRECODEC_REG_20, 0, 0, 100, 1, volume_tlv), -+SOC_SINGLE("Digital Playback Switch", ISABRECODEC_REG_21, 0, 1, 1), -+SOC_ENUM("FIR Filter Type", i_sabre_fir_filter_type_enum), -+SOC_ENUM("I2S/SPDIF Select", i_sabre_iis_spdif_sel_enum), -+}; -+ -+ -+static const u32 i_sabre_codec_dai_rates_slave[] = { -+ 8000, 11025, 16000, 22050, 32000, -+ 44100, 48000, 64000, 88200, 96000, -+ 176400, 192000, 352800, 384000, -+ 705600, 768000, 1411200, 1536000 -+}; -+ -+static const struct snd_pcm_hw_constraint_list constraints_slave = { -+ .list = i_sabre_codec_dai_rates_slave, -+ .count = ARRAY_SIZE(i_sabre_codec_dai_rates_slave), -+}; -+ -+static int i_sabre_codec_dai_startup_slave( -+ struct snd_pcm_substream *substream, struct snd_soc_dai *dai) -+{ -+ struct snd_soc_component *component = dai->component; -+ int ret; -+ -+ ret = snd_pcm_hw_constraint_list(substream->runtime, -+ 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_slave); -+ if (ret != 0) { -+ dev_err(component->card->dev, "Failed to setup rates constraints: %d\n", ret); -+ } -+ -+ return ret; -+} -+ -+static int i_sabre_codec_dai_startup( -+ struct snd_pcm_substream *substream, struct snd_soc_dai *dai) -+{ -+ struct snd_soc_component *component = dai->component; -+ struct i_sabre_codec_priv *i_sabre_codec -+ = snd_soc_component_get_drvdata(component); -+ -+ switch (i_sabre_codec->fmt & SND_SOC_DAIFMT_MASTER_MASK) { -+ case SND_SOC_DAIFMT_CBS_CFS: -+ return i_sabre_codec_dai_startup_slave(substream, dai); -+ -+ default: -+ return (-EINVAL); -+ } -+} -+ -+static int i_sabre_codec_hw_params( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, -+ struct snd_soc_dai *dai) -+{ -+ struct snd_soc_component *component = dai->component; -+ struct i_sabre_codec_priv *i_sabre_codec -+ = snd_soc_component_get_drvdata(component); -+ unsigned int daifmt; -+ int format_width; -+ -+ dev_dbg(component->card->dev, "hw_params %u Hz, %u channels\n", -+ params_rate(params), params_channels(params)); -+ -+ /* Check I2S Format (Bit Size) */ -+ format_width = snd_pcm_format_width(params_format(params)); -+ if ((format_width != 32) && (format_width != 16)) { -+ dev_err(component->card->dev, "Bad frame size: %d\n", -+ snd_pcm_format_width(params_format(params))); -+ return (-EINVAL); -+ } -+ -+ /* Check Slave Mode */ -+ daifmt = i_sabre_codec->fmt & SND_SOC_DAIFMT_MASTER_MASK; -+ if (daifmt != SND_SOC_DAIFMT_CBS_CFS) { -+ return (-EINVAL); -+ } -+ -+ /* Notify Sampling Frequency */ -+ switch (params_rate(params)) -+ { -+ case 44100: -+ case 48000: -+ case 88200: -+ case 96000: -+ case 176400: -+ case 192000: -+ snd_soc_component_update_bits(component, ISABRECODEC_REG_10, 0x01, 0x00); -+ break; -+ -+ case 352800: -+ case 384000: -+ case 705600: -+ case 768000: -+ case 1411200: -+ case 1536000: -+ snd_soc_component_update_bits(component, ISABRECODEC_REG_10, 0x01, 0x01); -+ break; -+ } -+ -+ return 0; -+} -+ -+static int i_sabre_codec_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) -+{ -+ struct snd_soc_component *component = dai->component; -+ struct i_sabre_codec_priv *i_sabre_codec -+ = snd_soc_component_get_drvdata(component); -+ -+ /* interface format */ -+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { -+ case SND_SOC_DAIFMT_I2S: -+ break; -+ -+ case SND_SOC_DAIFMT_RIGHT_J: -+ case SND_SOC_DAIFMT_LEFT_J: -+ default: -+ return (-EINVAL); -+ } -+ -+ /* clock inversion */ -+ if ((fmt & SND_SOC_DAIFMT_INV_MASK) != SND_SOC_DAIFMT_NB_NF) { -+ return (-EINVAL); -+ } -+ -+ /* Set Audio Data Format */ -+ i_sabre_codec->fmt = fmt; -+ -+ return 0; -+} -+ -+static int i_sabre_codec_dac_mute(struct snd_soc_dai *dai, int mute) -+{ -+ struct snd_soc_component *component = dai->component; -+ -+ if (mute) { -+ snd_soc_component_update_bits(component, ISABRECODEC_REG_21, 0x01, 0x01); -+ } else { -+ snd_soc_component_update_bits(component, ISABRECODEC_REG_21, 0x01, 0x00); -+ } -+ -+ return 0; -+} -+ -+ -+static const struct snd_soc_dai_ops i_sabre_codec_dai_ops = { -+ .startup = i_sabre_codec_dai_startup, -+ .hw_params = i_sabre_codec_hw_params, -+ .set_fmt = i_sabre_codec_set_fmt, -+ .digital_mute = i_sabre_codec_dac_mute, -+}; -+ -+static struct snd_soc_dai_driver i_sabre_codec_dai = { -+ .name = "i-sabre-codec-dai", -+ .playback = { -+ .stream_name = "Playback", -+ .channels_min = 2, -+ .channels_max = 2, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS, -+ .rate_min = 8000, -+ .rate_max = 1536000, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE -+ | SNDRV_PCM_FMTBIT_S32_LE, -+ }, -+ .ops = &i_sabre_codec_dai_ops, -+}; -+ -+static struct snd_soc_component_driver i_sabre_codec_codec_driver = { -+ .controls = i_sabre_codec_controls, -+ .num_controls = ARRAY_SIZE(i_sabre_codec_controls), -+}; -+ -+ -+static const struct regmap_config i_sabre_codec_regmap = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .max_register = ISABRECODEC_MAX_REG, -+ -+ .reg_defaults = i_sabre_codec_reg_defaults, -+ .num_reg_defaults = ARRAY_SIZE(i_sabre_codec_reg_defaults), -+ -+ .writeable_reg = i_sabre_codec_writeable, -+ .readable_reg = i_sabre_codec_readable, -+ .volatile_reg = i_sabre_codec_volatile, -+ -+ .cache_type = REGCACHE_RBTREE, -+}; -+ -+ -+static int i_sabre_codec_probe(struct device *dev, struct regmap *regmap) -+{ -+ struct i_sabre_codec_priv *i_sabre_codec; -+ int ret; -+ -+ i_sabre_codec = devm_kzalloc(dev, sizeof(*i_sabre_codec), GFP_KERNEL); -+ if (!i_sabre_codec) { -+ dev_err(dev, "devm_kzalloc"); -+ return (-ENOMEM); -+ } -+ -+ i_sabre_codec->regmap = regmap; -+ -+ dev_set_drvdata(dev, i_sabre_codec); -+ -+ ret = snd_soc_register_component(dev, -+ &i_sabre_codec_codec_driver, &i_sabre_codec_dai, 1); -+ if (ret != 0) { -+ dev_err(dev, "Failed to register CODEC: %d\n", ret); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static void i_sabre_codec_remove(struct device *dev) -+{ -+ snd_soc_unregister_component(dev); -+} -+ -+ -+static int i_sabre_codec_i2c_probe( -+ struct i2c_client *i2c, const struct i2c_device_id *id) -+{ -+ struct regmap *regmap; -+ -+ regmap = devm_regmap_init_i2c(i2c, &i_sabre_codec_regmap); -+ if (IS_ERR(regmap)) { -+ return PTR_ERR(regmap); -+ } -+ -+ return i_sabre_codec_probe(&i2c->dev, regmap); -+} -+ -+static int i_sabre_codec_i2c_remove(struct i2c_client *i2c) -+{ -+ i_sabre_codec_remove(&i2c->dev); -+ -+ return 0; -+} -+ -+ -+static const struct i2c_device_id i_sabre_codec_i2c_id[] = { -+ { "i-sabre-codec", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(i2c, i_sabre_codec_i2c_id); -+ -+static const struct of_device_id i_sabre_codec_of_match[] = { -+ { .compatible = "audiophonics,i-sabre-codec", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, i_sabre_codec_of_match); -+ -+static struct i2c_driver i_sabre_codec_i2c_driver = { -+ .driver = { -+ .name = "i-sabre-codec-i2c", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(i_sabre_codec_of_match), -+ }, -+ .probe = i_sabre_codec_i2c_probe, -+ .remove = i_sabre_codec_i2c_remove, -+ .id_table = i_sabre_codec_i2c_id, -+}; -+module_i2c_driver(i_sabre_codec_i2c_driver); -+ -+ -+MODULE_DESCRIPTION("ASoC I-Sabre Q2M codec driver"); -+MODULE_AUTHOR("Audiophonics "); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/sound/soc/codecs/i-sabre-codec.h -@@ -0,0 +1,42 @@ -+/* -+ * Driver for I-Sabre Q2M -+ * -+ * Author: Satoru Kawase -+ * Modified by: Xiao Qingyong -+ * Copyright 2018 Audiophonics -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#ifndef _SND_SOC_ISABRECODEC -+#define _SND_SOC_ISABRECODEC -+ -+ -+/* ISABRECODEC Register Address */ -+#define ISABRECODEC_REG_01 0x01 /* Virtual Device ID : 0x01 = es9038q2m */ -+#define ISABRECODEC_REG_02 0x02 /* API revision : 0x01 = Revision 01 */ -+#define ISABRECODEC_REG_10 0x10 /* 0x01 = above 192kHz, 0x00 = otherwise */ -+#define ISABRECODEC_REG_20 0x20 /* 0 - 100 (decimal value, 0 = min., 100 = max.) */ -+#define ISABRECODEC_REG_21 0x21 /* 0x00 = Mute OFF, 0x01 = Mute ON */ -+#define ISABRECODEC_REG_22 0x22 -+/* -+ 0x00 = brick wall, -+ 0x01 = corrected minimum phase fast, -+ 0x02 = minimum phase slow, -+ 0x03 = minimum phase fast, -+ 0x04 = linear phase slow, -+ 0x05 = linear phase fast, -+ 0x06 = apodizing fast, -+*/ -+//#define ISABRECODEC_REG_23 0x23 /* reserved */ -+#define ISABRECODEC_REG_24 0x24 /* 0x00 = I2S, 0x01 = SPDIF */ -+#define ISABRECODEC_MAX_REG 0x24 /* Maximum Register Number */ -+ -+#endif /* _SND_SOC_ISABRECODEC */ diff --git a/target/linux/brcm2708/patches-4.19/950-0410-staging-bcm2835-audio-Operate-non-atomic-PCM-ops.patch b/target/linux/brcm2708/patches-4.19/950-0410-staging-bcm2835-audio-Operate-non-atomic-PCM-ops.patch new file mode 100644 index 0000000000..722804ff63 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0410-staging-bcm2835-audio-Operate-non-atomic-PCM-ops.patch @@ -0,0 +1,593 @@ +From 87ba8310e9f0882e85926ac1ef91333f8906b303 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:49 +0200 +Subject: [PATCH] staging: bcm2835-audio: Operate non-atomic PCM ops + +commit 5c7883e5f27e829f3f3a2ba174d4a724bfd5f026 upstream. + +This is the most significant part in the patch series. + +The bcm2835-audio driver used to queue the commands to vc04 core via +workqueue, but basically the whole accesses to vc04 core are done in +the sleepable context, including the callback calls. In such a case, +rewriting the code using non-atomic PCM ops will simplify the logic a +lot. + +This patch does it: all workqueue are gone and each former-work +implementation is now directly called from PCM ops like trigger and +write transfer. + +Along with it, the DMA position updater, bcm2835_playback_fifo(), was +also rewritten to use a simpler logic. Now it handles the XRUN and +draining properly by calling snd_pcm_stop() conditionally. + +The current position is kept in atomic_t value so that it can be read +concurrently from the pointer callback. + +Also, the bcm2835_audio_instance object is allocated at the beginning +of bcm2835_audio_open(). This makes the resource management clearer. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 74 +++--- + .../bcm2835-audio/bcm2835-vchiq.c | 244 +++--------------- + .../vc04_services/bcm2835-audio/bcm2835.h | 9 +- + 3 files changed, 82 insertions(+), 245 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -11,7 +11,8 @@ + /* hardware definition */ + static const struct snd_pcm_hardware snd_bcm2835_playback_hw = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | +- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), ++ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | ++ SNDRV_PCM_INFO_DRAIN_TRIGGER), + .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, + .rate_min = 8000, +@@ -27,7 +28,8 @@ static const struct snd_pcm_hardware snd + + static const struct snd_pcm_hardware snd_bcm2835_playback_spdif_hw = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | +- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), ++ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | ++ SNDRV_PCM_INFO_DRAIN_TRIGGER), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000, +@@ -47,42 +49,34 @@ static void snd_bcm2835_playback_free(st + kfree(runtime->private_data); + } + +-void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream) ++void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream, ++ unsigned int bytes) + { +- unsigned int consumed = 0; +- int new_period = 0; ++ struct snd_pcm_substream *substream = alsa_stream->substream; ++ unsigned int pos; + +- audio_info("alsa_stream=%p substream=%p\n", alsa_stream, +- alsa_stream ? alsa_stream->substream : 0); ++ if (!alsa_stream->period_size) ++ return; + +- consumed = bcm2835_audio_retrieve_buffers(alsa_stream); +- +- /* We get called only if playback was triggered, So, the number of buffers we retrieve in +- * each iteration are the buffers that have been played out already +- */ +- +- if (alsa_stream->period_size) { +- if ((alsa_stream->pos / alsa_stream->period_size) != +- ((alsa_stream->pos + consumed) / alsa_stream->period_size)) +- new_period = 1; +- } +- audio_debug("updating pos cur: %d + %d max:%d period_bytes:%d, hw_ptr: %d new_period:%d\n", +- alsa_stream->pos, +- consumed, +- alsa_stream->buffer_size, +- (int) (alsa_stream->period_size * alsa_stream->substream->runtime->periods), +- frames_to_bytes(alsa_stream->substream->runtime, alsa_stream->substream->runtime->status->hw_ptr), +- new_period); +- if (alsa_stream->buffer_size) { +- alsa_stream->pos += consumed & ~(1 << 30); +- alsa_stream->pos %= alsa_stream->buffer_size; ++ if (bytes >= alsa_stream->buffer_size) { ++ snd_pcm_stream_lock(substream); ++ snd_pcm_stop(substream, ++ alsa_stream->draining ? ++ SNDRV_PCM_STATE_SETUP : ++ SNDRV_PCM_STATE_XRUN); ++ snd_pcm_stream_unlock(substream); ++ return; + } + +- if (alsa_stream->substream) { +- if (new_period) +- snd_pcm_period_elapsed(alsa_stream->substream); +- } else { +- audio_warning(" unexpected NULL substream\n"); ++ pos = atomic_read(&alsa_stream->pos); ++ pos += bytes; ++ pos %= alsa_stream->buffer_size; ++ atomic_set(&alsa_stream->pos, pos); ++ ++ alsa_stream->period_offset += bytes; ++ if (alsa_stream->period_offset >= alsa_stream->period_size) { ++ alsa_stream->period_offset %= alsa_stream->period_size; ++ snd_pcm_period_elapsed(substream); + } + } + +@@ -246,7 +240,8 @@ static int snd_bcm2835_pcm_prepare(struc + + alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); + alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); +- alsa_stream->pos = 0; ++ atomic_set(&alsa_stream->pos, 0); ++ alsa_stream->period_offset = 0; + alsa_stream->draining = false; + + return 0; +@@ -283,7 +278,7 @@ static int snd_bcm2835_pcm_trigger(struc + return bcm2835_audio_start(alsa_stream); + case SNDRV_PCM_TRIGGER_DRAIN: + alsa_stream->draining = true; +- return 0; ++ return bcm2835_audio_drain(alsa_stream); + case SNDRV_PCM_TRIGGER_STOP: + return bcm2835_audio_stop(alsa_stream); + default: +@@ -300,7 +295,7 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s + + return snd_pcm_indirect_playback_pointer(substream, + &alsa_stream->pcm_indirect, +- alsa_stream->pos); ++ atomic_read(&alsa_stream->pos)); + } + + /* operators */ +@@ -338,6 +333,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_c + if (err < 0) + return err; + pcm->private_data = chip; ++ pcm->nonatomic = true; + strcpy(pcm->name, "bcm2835 ALSA"); + chip->pcm = pcm; + chip->dest = AUDIO_DEST_AUTO; +@@ -367,6 +363,7 @@ int snd_bcm2835_new_spdif_pcm(struct bcm + return err; + + pcm->private_data = chip; ++ pcm->nonatomic = true; + strcpy(pcm->name, "bcm2835 IEC958/HDMI"); + chip->pcm_spdif = pcm; + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, +@@ -395,6 +392,7 @@ int snd_bcm2835_new_simple_pcm(struct bc + return err; + + pcm->private_data = chip; ++ pcm->nonatomic = true; + strcpy(pcm->name, name); + chip->pcm = pcm; + chip->dest = route; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -26,10 +26,6 @@ + + /* ---- Private Constants and Types ------------------------------------------ */ + +-#define BCM2835_AUDIO_STOP 0 +-#define BCM2835_AUDIO_START 1 +-#define BCM2835_AUDIO_WRITE 2 +- + /* Logging macros (for remapping to other logging mechanisms, i.e., printf) */ + #ifdef AUDIO_DEBUG_ENABLE + #define LOG_ERR(fmt, arg...) pr_err("%s:%d " fmt, __func__, __LINE__, ##arg) +@@ -55,17 +51,6 @@ struct bcm2835_audio_instance { + + static bool force_bulk; + +-/* ---- Private Variables ---------------------------------------------------- */ +- +-/* ---- Private Function Prototypes ------------------------------------------ */ +- +-/* ---- Private Functions ---------------------------------------------------- */ +- +-static int bcm2835_audio_stop_worker(struct bcm2835_alsa_stream *alsa_stream); +-static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream); +-static int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream, +- unsigned int count, void *src); +- + static void bcm2835_audio_lock(struct bcm2835_audio_instance *instance) + { + mutex_lock(&instance->vchi_mutex); +@@ -135,108 +120,6 @@ static const u32 BCM2835_AUDIO_WRITE_COO + static const u32 BCM2835_AUDIO_WRITE_COOKIE2 = ('D' << 24 | 'A' << 16 | + 'T' << 8 | 'A'); + +-struct bcm2835_audio_work { +- struct work_struct my_work; +- struct bcm2835_alsa_stream *alsa_stream; +- int cmd; +- void *src; +- unsigned int count; +-}; +- +-static void my_wq_function(struct work_struct *work) +-{ +- struct bcm2835_audio_work *w = +- container_of(work, struct bcm2835_audio_work, my_work); +- int ret = -9; +- +- switch (w->cmd) { +- case BCM2835_AUDIO_START: +- ret = bcm2835_audio_start_worker(w->alsa_stream); +- break; +- case BCM2835_AUDIO_STOP: +- ret = bcm2835_audio_stop_worker(w->alsa_stream); +- break; +- case BCM2835_AUDIO_WRITE: +- ret = bcm2835_audio_write_worker(w->alsa_stream, w->count, +- w->src); +- break; +- default: +- LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->cmd); +- break; +- } +- kfree((void *)work); +-} +- +-int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream) +-{ +- struct bcm2835_audio_work *work; +- +- work = kmalloc(sizeof(*work), GFP_ATOMIC); +- /*--- Queue some work (item 1) ---*/ +- if (!work) { +- LOG_ERR(" .. Error: NULL work kmalloc\n"); +- return -ENOMEM; +- } +- INIT_WORK(&work->my_work, my_wq_function); +- work->alsa_stream = alsa_stream; +- work->cmd = BCM2835_AUDIO_START; +- if (!queue_work(alsa_stream->my_wq, &work->my_work)) { +- kfree(work); +- return -EBUSY; +- } +- return 0; +-} +- +-int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream) +-{ +- struct bcm2835_audio_work *work; +- +- work = kmalloc(sizeof(*work), GFP_ATOMIC); +- /*--- Queue some work (item 1) ---*/ +- if (!work) { +- LOG_ERR(" .. Error: NULL work kmalloc\n"); +- return -ENOMEM; +- } +- INIT_WORK(&work->my_work, my_wq_function); +- work->alsa_stream = alsa_stream; +- work->cmd = BCM2835_AUDIO_STOP; +- if (!queue_work(alsa_stream->my_wq, &work->my_work)) { +- kfree(work); +- return -EBUSY; +- } +- return 0; +-} +- +-int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream, +- unsigned int count, void *src) +-{ +- struct bcm2835_audio_work *work; +- +- work = kmalloc(sizeof(*work), GFP_ATOMIC); +- /*--- Queue some work (item 1) ---*/ +- if (!work) { +- LOG_ERR(" .. Error: NULL work kmalloc\n"); +- return -ENOMEM; +- } +- INIT_WORK(&work->my_work, my_wq_function); +- work->alsa_stream = alsa_stream; +- work->cmd = BCM2835_AUDIO_WRITE; +- work->src = src; +- work->count = count; +- if (!queue_work(alsa_stream->my_wq, &work->my_work)) { +- kfree(work); +- return -EBUSY; +- } +- return 0; +-} +- +-static void my_workqueue_quit(struct bcm2835_alsa_stream *alsa_stream) +-{ +- flush_workqueue(alsa_stream->my_wq); +- destroy_workqueue(alsa_stream->my_wq); +- alsa_stream->my_wq = NULL; +-} +- + static void audio_vchi_callback(void *param, + const VCHI_CALLBACK_REASON_T reason, + void *msg_handle) +@@ -249,47 +132,27 @@ static void audio_vchi_callback(void *pa + if (reason != VCHI_CALLBACK_MSG_AVAILABLE) + return; + +- if (!instance) { +- LOG_ERR(" .. instance is null\n"); +- BUG(); +- return; +- } +- if (!instance->vchi_handle) { +- LOG_ERR(" .. instance->vchi_handle is null\n"); +- BUG(); +- return; +- } + status = vchi_msg_dequeue(instance->vchi_handle, + &m, sizeof(m), &msg_len, VCHI_FLAGS_NONE); + if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { +- LOG_DBG(" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n", +- instance, m.u.result.success); + instance->result = m.u.result.success; + complete(&instance->msg_avail_comp); + } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { +- struct bcm2835_alsa_stream *alsa_stream = instance->alsa_stream; +- +- LOG_DBG(" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n", +- instance, m.u.complete.count); + if (m.u.complete.cookie1 != BCM2835_AUDIO_WRITE_COOKIE1 || + m.u.complete.cookie2 != BCM2835_AUDIO_WRITE_COOKIE2) +- LOG_ERR(" .. response is corrupt\n"); +- else if (alsa_stream) { +- atomic_add(m.u.complete.count, +- &alsa_stream->retrieved); +- bcm2835_playback_fifo(alsa_stream); +- } else { +- LOG_ERR(" .. unexpected alsa_stream=%p\n", +- alsa_stream); +- } ++ LOG_ERR("invalid cookie\n"); ++ else ++ bcm2835_playback_fifo(instance->alsa_stream, ++ m.u.complete.count); + } else { +- LOG_ERR(" .. unexpected m.type=%d\n", m.type); ++ LOG_ERR("unexpected callback type=%d\n", m.type); + } + } + +-static struct bcm2835_audio_instance * ++static int + vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance, +- VCHI_CONNECTION_T *vchi_connection) ++ VCHI_CONNECTION_T *vchi_connection, ++ struct bcm2835_audio_instance *instance) + { + SERVICE_CREATION_T params = { + .version = VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER), +@@ -298,23 +161,14 @@ vc_vchi_audio_init(VCHI_INSTANCE_T vchi_ + .rx_fifo_size = 0, + .tx_fifo_size = 0, + .callback = audio_vchi_callback, ++ .callback_param = instance, + .want_unaligned_bulk_rx = 1, //TODO: remove VCOS_FALSE + .want_unaligned_bulk_tx = 1, //TODO: remove VCOS_FALSE + .want_crc = 0 + }; +- struct bcm2835_audio_instance *instance; + int status; + +- /* Allocate memory for this instance */ +- instance = kzalloc(sizeof(*instance), GFP_KERNEL); +- if (!instance) +- return ERR_PTR(-ENOMEM); +- +- /* Create a lock for exclusive, serialized VCHI connection access */ +- mutex_init(&instance->vchi_mutex); + /* Open the VCHI service connections */ +- params.callback_param = instance, +- + status = vchi_service_open(vchi_instance, ¶ms, + &instance->vchi_handle); + +@@ -322,16 +176,16 @@ vc_vchi_audio_init(VCHI_INSTANCE_T vchi_ + LOG_ERR("%s: failed to open VCHI service connection (status=%d)\n", + __func__, status); + kfree(instance); +- return ERR_PTR(-EPERM); ++ return -EPERM; + } + + /* Finished with the service for now */ + vchi_service_release(instance->vchi_handle); + +- return instance; ++ return 0; + } + +-static int vc_vchi_audio_deinit(struct bcm2835_audio_instance *instance) ++static void vc_vchi_audio_deinit(struct bcm2835_audio_instance *instance) + { + int status; + +@@ -346,10 +200,6 @@ static int vc_vchi_audio_deinit(struct b + } + + mutex_unlock(&instance->vchi_mutex); +- +- kfree(instance); +- +- return 0; + } + + int bcm2835_new_vchi_ctx(struct bcm2835_vchi_ctx *vchi_ctx) +@@ -387,39 +237,25 @@ void bcm2835_free_vchi_ctx(struct bcm283 + vchi_ctx->vchi_instance = NULL; + } + +-static int bcm2835_audio_open_connection(struct bcm2835_alsa_stream *alsa_stream) +-{ +- struct bcm2835_audio_instance *instance = +- (struct bcm2835_audio_instance *)alsa_stream->instance; +- struct bcm2835_vchi_ctx *vhci_ctx = alsa_stream->chip->vchi_ctx; +- +- /* Initialize an instance of the audio service */ +- instance = vc_vchi_audio_init(vhci_ctx->vchi_instance, +- vhci_ctx->vchi_connection); +- +- if (IS_ERR(instance)) +- return PTR_ERR(instance); +- +- instance->alsa_stream = alsa_stream; +- alsa_stream->instance = instance; +- +- return 0; +-} +- + int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream) + { ++ struct bcm2835_vchi_ctx *vchi_ctx = alsa_stream->chip->vchi_ctx; + struct bcm2835_audio_instance *instance; + int err; + +- alsa_stream->my_wq = alloc_workqueue("my_queue", WQ_HIGHPRI, 1); +- if (!alsa_stream->my_wq) ++ /* Allocate memory for this instance */ ++ instance = kzalloc(sizeof(*instance), GFP_KERNEL); ++ if (!instance) + return -ENOMEM; ++ mutex_init(&instance->vchi_mutex); ++ instance->alsa_stream = alsa_stream; ++ alsa_stream->instance = instance; + +- err = bcm2835_audio_open_connection(alsa_stream); ++ err = vc_vchi_audio_init(vchi_ctx->vchi_instance, ++ vchi_ctx->vchi_connection, ++ instance); + if (err < 0) +- goto free_wq; +- +- instance = alsa_stream->instance; ++ goto free_instance; + + err = bcm2835_audio_send_simple(instance, VC_AUDIO_MSG_TYPE_OPEN, + false); +@@ -438,8 +274,9 @@ int bcm2835_audio_open(struct bcm2835_al + + deinit: + vc_vchi_audio_deinit(instance); +- free_wq: +- destroy_workqueue(alsa_stream->my_wq); ++ free_instance: ++ alsa_stream->instance = NULL; ++ kfree(instance); + return err; + } + +@@ -478,37 +315,46 @@ int bcm2835_audio_set_params(struct bcm2 + return bcm2835_audio_send_msg(alsa_stream->instance, &m, true); + } + +-static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream) ++int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream) + { + return bcm2835_audio_send_simple(alsa_stream->instance, + VC_AUDIO_MSG_TYPE_START, false); + } + +-static int bcm2835_audio_stop_worker(struct bcm2835_alsa_stream *alsa_stream) ++int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream) + { + return bcm2835_audio_send_simple(alsa_stream->instance, + VC_AUDIO_MSG_TYPE_STOP, false); + } + ++int bcm2835_audio_drain(struct bcm2835_alsa_stream *alsa_stream) ++{ ++ struct vc_audio_msg m = { ++ .type = VC_AUDIO_MSG_TYPE_STOP, ++ .u.stop.draining = 1, ++ }; ++ ++ return bcm2835_audio_send_msg(alsa_stream->instance, &m, false); ++} ++ + int bcm2835_audio_close(struct bcm2835_alsa_stream *alsa_stream) + { + struct bcm2835_audio_instance *instance = alsa_stream->instance; + int err; + +- my_workqueue_quit(alsa_stream); +- + err = bcm2835_audio_send_simple(alsa_stream->instance, + VC_AUDIO_MSG_TYPE_CLOSE, true); + + /* Stop the audio service */ + vc_vchi_audio_deinit(instance); + alsa_stream->instance = NULL; ++ kfree(instance); + + return err; + } + +-static int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream, +- unsigned int size, void *src) ++int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream, ++ unsigned int size, void *src) + { + struct bcm2835_audio_instance *instance = alsa_stream->instance; + struct vc_audio_msg m = { +@@ -558,13 +404,5 @@ static int bcm2835_audio_write_worker(st + return err; + } + +-unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream) +-{ +- unsigned int count = atomic_read(&alsa_stream->retrieved); +- +- atomic_sub(count, &alsa_stream->retrieved); +- return count; +-} +- + module_param(force_bulk, bool, 0444); + MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio"); +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -121,13 +121,12 @@ struct bcm2835_alsa_stream { + + int draining; + +- unsigned int pos; ++ atomic_t pos; ++ unsigned int period_offset; + unsigned int buffer_size; + unsigned int period_size; + +- atomic_t retrieved; + struct bcm2835_audio_instance *instance; +- struct workqueue_struct *my_wq; + int idx; + }; + +@@ -152,11 +151,13 @@ int bcm2835_audio_set_params(struct bcm2 + unsigned int bps); + int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream); + int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream); ++int bcm2835_audio_drain(struct bcm2835_alsa_stream *alsa_stream); + int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream); + int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream, + unsigned int count, + void *src); +-void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream); ++void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream, ++ unsigned int size); + unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream); + + #endif /* __SOUND_ARM_BCM2835_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0411-ASoC-tlv320aic32x4-Change-author-s-name.patch b/target/linux/brcm2708/patches-4.19/950-0411-ASoC-tlv320aic32x4-Change-author-s-name.patch deleted file mode 100644 index 558fddae57..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0411-ASoC-tlv320aic32x4-Change-author-s-name.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 5942d9e650ce419236d5a7dc53c2513889ed3453 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Wed, 3 Apr 2019 21:17:15 -0700 -Subject: [PATCH 411/806] ASoC: tlv320aic32x4: Change author's name - -commit 7297ba6c74c5b9e78d8e936af82eecfcf7d32dfb upstream. - -The author of these files has changed her name. Update -instances in the code of her dead name to current legal -name. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4-i2c.c | 4 ++-- - sound/soc/codecs/tlv320aic32x4-spi.c | 4 ++-- - 2 files changed, 4 insertions(+), 4 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4-i2c.c -+++ b/sound/soc/codecs/tlv320aic32x4-i2c.c -@@ -3,7 +3,7 @@ - * - * Copyright 2011 NW Digital Radio - * -- * Author: Jeremy McDermond -+ * Author: Annaliese McDermond - * - * Based on sound/soc/codecs/wm8974 and TI driver for kernel 2.6.27. - * -@@ -72,5 +72,5 @@ static struct i2c_driver aic32x4_i2c_dri - module_i2c_driver(aic32x4_i2c_driver); - - MODULE_DESCRIPTION("ASoC TLV320AIC32x4 codec driver I2C"); --MODULE_AUTHOR("Jeremy McDermond "); -+MODULE_AUTHOR("Annaliese McDermond "); - MODULE_LICENSE("GPL"); ---- a/sound/soc/codecs/tlv320aic32x4-spi.c -+++ b/sound/soc/codecs/tlv320aic32x4-spi.c -@@ -3,7 +3,7 @@ - * - * Copyright 2011 NW Digital Radio - * -- * Author: Jeremy McDermond -+ * Author: Annaliese McDermond - * - * Based on sound/soc/codecs/wm8974 and TI driver for kernel 2.6.27. - * -@@ -74,5 +74,5 @@ static struct spi_driver aic32x4_spi_dri - module_spi_driver(aic32x4_spi_driver); - - MODULE_DESCRIPTION("ASoC TLV320AIC32x4 codec driver SPI"); --MODULE_AUTHOR("Jeremy McDermond "); -+MODULE_AUTHOR("Annaliese McDermond "); - MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.19/950-0411-staging-bcm2835-audio-Use-card-private_data.patch b/target/linux/brcm2708/patches-4.19/950-0411-staging-bcm2835-audio-Use-card-private_data.patch new file mode 100644 index 0000000000..d4d61ce0fb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0411-staging-bcm2835-audio-Use-card-private_data.patch @@ -0,0 +1,138 @@ +From af0ded6e9dd38f08a9ee621066e583b5cf972926 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:50 +0200 +Subject: [PATCH] staging: bcm2835-audio: Use card->private_data + +commit 898001a0c845cefe5d47d133485712412853f0a8 upstream. + +Instead of allocating a separate snd_device object, let snd_card_new() +allocate the private resource. This simplifies the code. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835.c | 91 +++---------------- + 1 file changed, 13 insertions(+), 78 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -86,9 +86,6 @@ static int bcm2835_devm_add_vchi_ctx(str + + static void snd_bcm2835_release(struct device *dev) + { +- struct bcm2835_chip *chip = dev_get_drvdata(dev); +- +- kfree(chip); + } + + static struct device * +@@ -117,69 +114,6 @@ snd_create_device(struct device *parent, + return device; + } + +-/* component-destructor +- * (see "Management of Cards and Components") +- */ +-static int snd_bcm2835_dev_free(struct snd_device *device) +-{ +- struct bcm2835_chip *chip = device->device_data; +- struct snd_card *card = chip->card; +- +- snd_device_free(card, chip); +- +- return 0; +-} +- +-/* chip-specific constructor +- * (see "Management of Cards and Components") +- */ +-static int snd_bcm2835_create(struct snd_card *card, +- struct bcm2835_chip **rchip) +-{ +- struct bcm2835_chip *chip; +- int err; +- static struct snd_device_ops ops = { +- .dev_free = snd_bcm2835_dev_free, +- }; +- +- *rchip = NULL; +- +- chip = kzalloc(sizeof(*chip), GFP_KERNEL); +- if (!chip) +- return -ENOMEM; +- +- chip->card = card; +- mutex_init(&chip->audio_mutex); +- +- chip->vchi_ctx = devres_find(card->dev->parent, +- bcm2835_devm_free_vchi_ctx, NULL, NULL); +- if (!chip->vchi_ctx) { +- kfree(chip); +- return -ENODEV; +- } +- +- err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); +- if (err) { +- kfree(chip); +- return err; +- } +- +- *rchip = chip; +- return 0; +-} +- +-static struct snd_card *snd_bcm2835_card_new(struct device *dev) +-{ +- struct snd_card *card; +- int ret; +- +- ret = snd_card_new(dev, -1, NULL, THIS_MODULE, 0, &card); +- if (ret) +- return ERR_PTR(ret); +- +- return card; +-} +- + typedef int (*bcm2835_audio_newpcm_func)(struct bcm2835_chip *chip, + const char *name, + enum snd_bcm2835_route route, +@@ -292,25 +226,26 @@ static int snd_add_child_device(struct d + return PTR_ERR(child); + } + +- card = snd_bcm2835_card_new(child); +- if (IS_ERR(card)) { ++ err = snd_card_new(child, -1, NULL, THIS_MODULE, sizeof(*chip), &card); ++ if (err < 0) { + dev_err(child, "Failed to create card"); +- return PTR_ERR(card); ++ return err; + } + +- snd_card_set_dev(card, child); ++ chip = card->private_data; ++ chip->card = card; ++ chip->dev = child; ++ mutex_init(&chip->audio_mutex); ++ ++ chip->vchi_ctx = devres_find(device, ++ bcm2835_devm_free_vchi_ctx, NULL, NULL); ++ if (!chip->vchi_ctx) ++ return -ENODEV; ++ + strcpy(card->driver, audio_driver->driver.name); + strcpy(card->shortname, audio_driver->shortname); + strcpy(card->longname, audio_driver->longname); + +- err = snd_bcm2835_create(card, &chip); +- if (err) { +- dev_err(child, "Failed to create chip, error %d\n", err); +- return err; +- } +- +- chip->dev = child; +- + err = audio_driver->newpcm(chip, audio_driver->shortname, + audio_driver->route, + numchans); diff --git a/target/linux/brcm2708/patches-4.19/950-0412-ASoC-tlv320aic32x4-Update-copyright-and-use-SPDX-ide.patch b/target/linux/brcm2708/patches-4.19/950-0412-ASoC-tlv320aic32x4-Update-copyright-and-use-SPDX-ide.patch deleted file mode 100644 index 6341948129..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0412-ASoC-tlv320aic32x4-Update-copyright-and-use-SPDX-ide.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 1ed86adfa457ecd9668f2541dabfebd3ee82d035 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Wed, 3 Apr 2019 21:17:16 -0700 -Subject: [PATCH 412/806] ASoC: tlv320aic32x4: Update copyright and use SPDX - identifier - -commit 8a1d95c393d971e624fc28f11516b0bc3a7fa706 upstream. - -Update the copyright dates and use the SPDX identifier instead -of reciting the license. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4-i2c.c | 14 ++------------ - sound/soc/codecs/tlv320aic32x4-spi.c | 14 ++------------ - 2 files changed, 4 insertions(+), 24 deletions(-) - ---- a/sound/soc/codecs/tlv320aic32x4-i2c.c -+++ b/sound/soc/codecs/tlv320aic32x4-i2c.c -@@ -1,21 +1,11 @@ --/* -- * linux/sound/soc/codecs/tlv320aic32x4-i2c.c -+/* SPDX-License-Identifier: GPL-2.0 - * -- * Copyright 2011 NW Digital Radio -+ * Copyright 2011-2019 NW Digital Radio - * - * Author: Annaliese McDermond - * - * Based on sound/soc/codecs/wm8974 and TI driver for kernel 2.6.27. - * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License as published by -- * the Free Software Foundation; either version 2 of the License, or -- * (at your option) any later version. -- * -- * This program is distributed in the hope that it will be useful, -- * but WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- * GNU General Public License for more details. - */ - - #include ---- a/sound/soc/codecs/tlv320aic32x4-spi.c -+++ b/sound/soc/codecs/tlv320aic32x4-spi.c -@@ -1,21 +1,11 @@ --/* -- * linux/sound/soc/codecs/tlv320aic32x4-spi.c -+/* SPDX-License-Identifier: GPL-2.0 - * -- * Copyright 2011 NW Digital Radio -+ * Copyright 2011-2019 NW Digital Radio - * - * Author: Annaliese McDermond - * - * Based on sound/soc/codecs/wm8974 and TI driver for kernel 2.6.27. - * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License as published by -- * the Free Software Foundation; either version 2 of the License, or -- * (at your option) any later version. -- * -- * This program is distributed in the hope that it will be useful, -- * but WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- * GNU General Public License for more details. - */ - - #include diff --git a/target/linux/brcm2708/patches-4.19/950-0412-staging-bcm2835-audio-Use-standard-error-print-helpe.patch b/target/linux/brcm2708/patches-4.19/950-0412-staging-bcm2835-audio-Use-standard-error-print-helpe.patch new file mode 100644 index 0000000000..63cd0b01b8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0412-staging-bcm2835-audio-Use-standard-error-print-helpe.patch @@ -0,0 +1,237 @@ +From ec788d7c115d3ec59b39b6aac17d57ad86b7fbfe Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:51 +0200 +Subject: [PATCH] staging: bcm2835-audio: Use standard error print + helpers + +commit b7584b64168208ebc14160770c0966b8b12fc16b upstream. + +For making the whole code more consistent, replace the home-made debug +print macros with the standard dev_err() & co. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 4 +- + .../bcm2835-audio/bcm2835-vchiq.c | 52 ++++++++----------- + .../vc04_services/bcm2835-audio/bcm2835.c | 2 +- + .../vc04_services/bcm2835-audio/bcm2835.h | 43 +-------------- + 4 files changed, 27 insertions(+), 74 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -101,8 +101,8 @@ static int snd_bcm2835_playback_open_gen + goto out; + } + if (idx >= MAX_SUBSTREAMS) { +- audio_error +- ("substream(%d) device doesn't exist max(%d) substreams allowed\n", ++ dev_err(chip->dev, ++ "substream(%d) device doesn't exist max(%d) substreams allowed\n", + idx, MAX_SUBSTREAMS); + err = -ENODEV; + goto out; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -26,20 +26,8 @@ + + /* ---- Private Constants and Types ------------------------------------------ */ + +-/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */ +-#ifdef AUDIO_DEBUG_ENABLE +-#define LOG_ERR(fmt, arg...) pr_err("%s:%d " fmt, __func__, __LINE__, ##arg) +-#define LOG_WARN(fmt, arg...) pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) +-#define LOG_INFO(fmt, arg...) pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) +-#define LOG_DBG(fmt, arg...) pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) +-#else +-#define LOG_ERR(fmt, arg...) pr_err("%s:%d " fmt, __func__, __LINE__, ##arg) +-#define LOG_WARN(fmt, arg...) no_printk(fmt, ##arg) +-#define LOG_INFO(fmt, arg...) no_printk(fmt, ##arg) +-#define LOG_DBG(fmt, arg...) no_printk(fmt, ##arg) +-#endif +- + struct bcm2835_audio_instance { ++ struct device *dev; + VCHI_SERVICE_HANDLE_T vchi_handle; + struct completion msg_avail_comp; + struct mutex vchi_mutex; +@@ -76,7 +64,8 @@ static int bcm2835_audio_send_msg_locked + status = vchi_queue_kernel_message(instance->vchi_handle, + m, sizeof(*m)); + if (status) { +- LOG_ERR("vchi message queue failed: %d, msg=%d\n", ++ dev_err(instance->dev, ++ "vchi message queue failed: %d, msg=%d\n", + status, m->type); + return -EIO; + } +@@ -84,10 +73,12 @@ static int bcm2835_audio_send_msg_locked + if (wait) { + if (!wait_for_completion_timeout(&instance->msg_avail_comp, + msecs_to_jiffies(10 * 1000))) { +- LOG_ERR("vchi message timeout, msg=%d\n", m->type); ++ dev_err(instance->dev, ++ "vchi message timeout, msg=%d\n", m->type); + return -ETIMEDOUT; + } else if (instance->result) { +- LOG_ERR("vchi message response error:%d, msg=%d\n", ++ dev_err(instance->dev, ++ "vchi message response error:%d, msg=%d\n", + instance->result, m->type); + return -EIO; + } +@@ -140,12 +131,12 @@ static void audio_vchi_callback(void *pa + } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { + if (m.u.complete.cookie1 != BCM2835_AUDIO_WRITE_COOKIE1 || + m.u.complete.cookie2 != BCM2835_AUDIO_WRITE_COOKIE2) +- LOG_ERR("invalid cookie\n"); ++ dev_err(instance->dev, "invalid cookie\n"); + else + bcm2835_playback_fifo(instance->alsa_stream, + m.u.complete.count); + } else { +- LOG_ERR("unexpected callback type=%d\n", m.type); ++ dev_err(instance->dev, "unexpected callback type=%d\n", m.type); + } + } + +@@ -173,8 +164,9 @@ vc_vchi_audio_init(VCHI_INSTANCE_T vchi_ + &instance->vchi_handle); + + if (status) { +- LOG_ERR("%s: failed to open VCHI service connection (status=%d)\n", +- __func__, status); ++ dev_err(instance->dev, ++ "failed to open VCHI service connection (status=%d)\n", ++ status); + kfree(instance); + return -EPERM; + } +@@ -195,30 +187,30 @@ static void vc_vchi_audio_deinit(struct + /* Close all VCHI service connections */ + status = vchi_service_close(instance->vchi_handle); + if (status) { +- LOG_DBG("%s: failed to close VCHI service connection (status=%d)\n", +- __func__, status); ++ dev_err(instance->dev, ++ "failed to close VCHI service connection (status=%d)\n", ++ status); + } + + mutex_unlock(&instance->vchi_mutex); + } + +-int bcm2835_new_vchi_ctx(struct bcm2835_vchi_ctx *vchi_ctx) ++int bcm2835_new_vchi_ctx(struct device *dev, struct bcm2835_vchi_ctx *vchi_ctx) + { + int ret; + + /* Initialize and create a VCHI connection */ + ret = vchi_initialise(&vchi_ctx->vchi_instance); + if (ret) { +- LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n", +- __func__, ret); +- ++ dev_err(dev, "failed to initialise VCHI instance (ret=%d)\n", ++ ret); + return -EIO; + } + + ret = vchi_connect(NULL, 0, vchi_ctx->vchi_instance); + if (ret) { +- LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n", +- __func__, ret); ++ dev_dbg(dev, "failed to connect VCHI instance (ret=%d)\n", ++ ret); + + kfree(vchi_ctx->vchi_instance); + vchi_ctx->vchi_instance = NULL; +@@ -248,6 +240,7 @@ int bcm2835_audio_open(struct bcm2835_al + if (!instance) + return -ENOMEM; + mutex_init(&instance->vchi_mutex); ++ instance->dev = alsa_stream->chip->dev; + instance->alsa_stream = alsa_stream; + alsa_stream->instance = instance; + +@@ -394,7 +387,8 @@ int bcm2835_audio_write(struct bcm2835_a + } + + if (status) { +- LOG_ERR("failed on %d bytes transfer (status=%d)\n", ++ dev_err(instance->dev, ++ "failed on %d bytes transfer (status=%d)\n", + size, status); + err = -EIO; + } +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -73,7 +73,7 @@ static int bcm2835_devm_add_vchi_ctx(str + + memset(vchi_ctx, 0, sizeof(*vchi_ctx)); + +- ret = bcm2835_new_vchi_ctx(vchi_ctx); ++ ret = bcm2835_new_vchi_ctx(dev, vchi_ctx); + if (ret) { + devres_free(vchi_ctx); + return ret; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -17,47 +17,6 @@ + + #include "interface/vchi/vchi.h" + +-/* +- * #define AUDIO_DEBUG_ENABLE +- * #define AUDIO_VERBOSE_DEBUG_ENABLE +- */ +- +-/* Debug macros */ +- +-#ifdef AUDIO_DEBUG_ENABLE +-#ifdef AUDIO_VERBOSE_DEBUG_ENABLE +- +-#define audio_debug(fmt, arg...) \ +- pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) +- +-#define audio_info(fmt, arg...) \ +- pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) +- +-#else +- +-#define audio_debug(fmt, arg...) +- +-#define audio_info(fmt, arg...) +- +-#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */ +- +-#else +- +-#define audio_debug(fmt, arg...) +- +-#define audio_info(fmt, arg...) +- +-#endif /* AUDIO_DEBUG_ENABLE */ +- +-#define audio_error(fmt, arg...) \ +- pr_err("%s:%d " fmt, __func__, __LINE__, ##arg) +- +-#define audio_warning(fmt, arg...) \ +- pr_warn("%s:%d " fmt, __func__, __LINE__, ##arg) +- +-#define audio_alert(fmt, arg...) \ +- pr_alert("%s:%d " fmt, __func__, __LINE__, ##arg) +- + #define MAX_SUBSTREAMS (8) + #define AVAIL_SUBSTREAMS_MASK (0xff) + +@@ -141,7 +100,7 @@ int snd_bcm2835_new_simple_pcm(struct bc + int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip); + int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip); + +-int bcm2835_new_vchi_ctx(struct bcm2835_vchi_ctx *vchi_ctx); ++int bcm2835_new_vchi_ctx(struct device *dev, struct bcm2835_vchi_ctx *vchi_ctx); + void bcm2835_free_vchi_ctx(struct bcm2835_vchi_ctx *vchi_ctx); + + int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream); diff --git a/target/linux/brcm2708/patches-4.19/950-0413-ASoC-tlv320aic32x4-Add-Switch-for-Setting-Common-Mod.patch b/target/linux/brcm2708/patches-4.19/950-0413-ASoC-tlv320aic32x4-Add-Switch-for-Setting-Common-Mod.patch deleted file mode 100644 index af7ff04a73..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0413-ASoC-tlv320aic32x4-Add-Switch-for-Setting-Common-Mod.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 0962637c67a56c1ae42ccb14c9e71c62f4aa1403 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Wed, 3 Apr 2019 21:01:54 -0700 -Subject: [PATCH 413/806] ASoC: tlv320aic32x4: Add Switch for Setting Common - Mode Voltage - -commit 44ceee847e27c828f2f1ef4e400e6bc0c8d04de3 upstream. - -Add a switch for setting common mode voltage. This can allow -for higher drive levels on the amplifier outputs. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -242,6 +242,12 @@ static DECLARE_TLV_DB_SCALE(tlv_driver_g - /* -12dB min, 0.5dB steps */ - static DECLARE_TLV_DB_SCALE(tlv_adc_vol, -1200, 50, 0); - -+static const char * const lo_cm_text[] = { -+ "Full Chip", "1.65V", -+}; -+ -+static SOC_ENUM_SINGLE_DECL(lo_cm_enum, AIC32X4_CMMODE, 3, lo_cm_text); -+ - static const struct snd_kcontrol_new aic32x4_snd_controls[] = { - SOC_DOUBLE_R_S_TLV("PCM Playback Volume", AIC32X4_LDACVOL, - AIC32X4_RDACVOL, 0, -0x7f, 0x30, 7, 0, tlv_pcm), -@@ -255,6 +261,7 @@ static const struct snd_kcontrol_new aic - AIC32X4_HPRGAIN, 6, 0x01, 1), - SOC_DOUBLE_R("LO DAC Playback Switch", AIC32X4_LOLGAIN, - AIC32X4_LORGAIN, 6, 0x01, 1), -+ SOC_ENUM("LO Playback Common Mode Switch", lo_cm_enum), - SOC_DOUBLE_R("Mic PGA Switch", AIC32X4_LMICPGAVOL, - AIC32X4_RMICPGAVOL, 7, 0x01, 1), - diff --git a/target/linux/brcm2708/patches-4.19/950-0413-staging-bcm2835-audio-Remove-unnecessary-header-file.patch b/target/linux/brcm2708/patches-4.19/950-0413-staging-bcm2835-audio-Remove-unnecessary-header-file.patch new file mode 100644 index 0000000000..989e0e43d6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0413-staging-bcm2835-audio-Remove-unnecessary-header-file.patch @@ -0,0 +1,73 @@ +From 8deead340379eeb09571476e0412ce50036c08d1 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:52 +0200 +Subject: [PATCH] staging: bcm2835-audio: Remove unnecessary header + file includes + +commit 7e46fff5f19ce2b8a9891e4c08631c64d06e9e17 upstream. + +Yet a few header files are included unnecessarily. Drop them. + +Also remove trivial comments. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../bcm2835-audio/bcm2835-vchiq.c | 19 ------------------- + .../vc04_services/bcm2835-audio/bcm2835.h | 6 ------ + 2 files changed, 25 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -1,31 +1,12 @@ + // SPDX-License-Identifier: GPL-2.0 + /* Copyright 2011 Broadcom Corporation. All rights reserved. */ + +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include + #include +-#include +-#include + #include + #include +- + #include "bcm2835.h" +- +-/* ---- Include Files -------------------------------------------------------- */ +- + #include "vc_vchi_audioserv_defs.h" + +-/* ---- Private Constants and Types ------------------------------------------ */ +- + struct bcm2835_audio_instance { + struct device *dev; + VCHI_SERVICE_HANDLE_T vchi_handle; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -5,16 +5,10 @@ + #define __SOUND_ARM_BCM2835_H + + #include +-#include +-#include + #include + #include +-#include + #include +-#include + #include +-#include +- + #include "interface/vchi/vchi.h" + + #define MAX_SUBSTREAMS (8) diff --git a/target/linux/brcm2708/patches-4.19/950-0414-ASoC-tlv320aic32x4-Add-Playback-PowerTune-Controls.patch b/target/linux/brcm2708/patches-4.19/950-0414-ASoC-tlv320aic32x4-Add-Playback-PowerTune-Controls.patch deleted file mode 100644 index ed99515eb2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0414-ASoC-tlv320aic32x4-Add-Playback-PowerTune-Controls.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 6e5099288c946037476abd1488e4c7ab6b818e2b Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Wed, 3 Apr 2019 21:01:55 -0700 -Subject: [PATCH 414/806] ASoC: tlv320aic32x4: Add Playback PowerTune Controls - -commit d3e6e374566e1154820a9a3dc82f7eef646fcf95 upstream. - -PowerTune controls the power level of the chip. On playback this -indirectly controls things like the gain of the various output -amplifiers. This can allow for the decrease of output levels -from the codec. This adds controls for those power levels to -the driver. - -Signed-off-by: Annaliese McDermond -Signed-off-by: Mark Brown ---- - sound/soc/codecs/tlv320aic32x4.c | 9 +++++++++ - sound/soc/codecs/tlv320aic32x4.h | 2 ++ - 2 files changed, 11 insertions(+) - ---- a/sound/soc/codecs/tlv320aic32x4.c -+++ b/sound/soc/codecs/tlv320aic32x4.c -@@ -248,9 +248,18 @@ static const char * const lo_cm_text[] = - - static SOC_ENUM_SINGLE_DECL(lo_cm_enum, AIC32X4_CMMODE, 3, lo_cm_text); - -+static const char * const ptm_text[] = { -+ "P3", "P2", "P1", -+}; -+ -+static SOC_ENUM_SINGLE_DECL(l_ptm_enum, AIC32X4_LPLAYBACK, 2, ptm_text); -+static SOC_ENUM_SINGLE_DECL(r_ptm_enum, AIC32X4_RPLAYBACK, 2, ptm_text); -+ - static const struct snd_kcontrol_new aic32x4_snd_controls[] = { - SOC_DOUBLE_R_S_TLV("PCM Playback Volume", AIC32X4_LDACVOL, - AIC32X4_RDACVOL, 0, -0x7f, 0x30, 7, 0, tlv_pcm), -+ SOC_ENUM("DAC Left Playback PowerTune Switch", l_ptm_enum), -+ SOC_ENUM("DAC Right Playback PowerTune Switch", r_ptm_enum), - SOC_DOUBLE_R_S_TLV("HP Driver Gain Volume", AIC32X4_HPLGAIN, - AIC32X4_HPRGAIN, 0, -0x6, 0x1d, 5, 0, - tlv_driver_gain), ---- a/sound/soc/codecs/tlv320aic32x4.h -+++ b/sound/soc/codecs/tlv320aic32x4.h -@@ -78,6 +78,8 @@ int aic32x4_register_clocks(struct devic - - #define AIC32X4_PWRCFG AIC32X4_REG(1, 1) - #define AIC32X4_LDOCTL AIC32X4_REG(1, 2) -+#define AIC32X4_LPLAYBACK AIC32X4_REG(1, 3) -+#define AIC32X4_RPLAYBACK AIC32X4_REG(1, 4) - #define AIC32X4_OUTPWRCTL AIC32X4_REG(1, 9) - #define AIC32X4_CMMODE AIC32X4_REG(1, 10) - #define AIC32X4_HPLROUTE AIC32X4_REG(1, 12) diff --git a/target/linux/brcm2708/patches-4.19/950-0414-staging-bcm2835-audio-Move-module-parameter-descript.patch b/target/linux/brcm2708/patches-4.19/950-0414-staging-bcm2835-audio-Move-module-parameter-descript.patch new file mode 100644 index 0000000000..5db4daa5cd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0414-staging-bcm2835-audio-Move-module-parameter-descript.patch @@ -0,0 +1,36 @@ +From fb05aeb91f3e94e89ad2d9aa68104e6e4cc97239 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:53 +0200 +Subject: [PATCH] staging: bcm2835-audio: Move module parameter + description + +commit b876f2075808e95e244053caa53fa7e86e929a99 upstream. + +For more consistency, move the module parameter description right +after its variable definition. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -19,6 +19,8 @@ struct bcm2835_audio_instance { + }; + + static bool force_bulk; ++module_param(force_bulk, bool, 0444); ++MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio"); + + static void bcm2835_audio_lock(struct bcm2835_audio_instance *instance) + { +@@ -378,6 +380,3 @@ int bcm2835_audio_write(struct bcm2835_a + bcm2835_audio_unlock(instance); + return err; + } +- +-module_param(force_bulk, bool, 0444); +-MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0415-dtoverlays-Add-Support-for-the-UDRC-DRAWS.patch b/target/linux/brcm2708/patches-4.19/950-0415-dtoverlays-Add-Support-for-the-UDRC-DRAWS.patch deleted file mode 100644 index b244fec143..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0415-dtoverlays-Add-Support-for-the-UDRC-DRAWS.patch +++ /dev/null @@ -1,445 +0,0 @@ -From 1d3aeba25b10d1ed2b5ae4cf0b535d821539a531 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Sun, 17 Mar 2019 16:48:36 -0700 -Subject: [PATCH 415/806] dtoverlays: Add Support for the UDRC/DRAWS - -Adds a new overlay to support the Northwest Digital Radio -DRAWS and UDRC HATs. See http://nwdigitalradio.com. - -Signed-off-by: Annaliese McDermond ---- - arch/arm/boot/dts/overlays/Makefile | 2 + - arch/arm/boot/dts/overlays/README | 59 ++++++ - arch/arm/boot/dts/overlays/draws-overlay.dts | 200 +++++++++++++++++++ - arch/arm/boot/dts/overlays/udrc-overlay.dts | 128 ++++++++++++ - 4 files changed, 389 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/draws-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/udrc-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -29,6 +29,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - dionaudio-loco-v2.dtbo \ - dpi18.dtbo \ - dpi24.dtbo \ -+ draws.dtbo \ - dwc-otg.dtbo \ - dwc2.dtbo \ - enc28j60.dtbo \ -@@ -146,6 +147,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - tpm-slb9670.dtbo \ - uart0.dtbo \ - uart1.dtbo \ -+ udrc.dtbo \ - upstream.dtbo \ - upstream-aux-interrupt.dtbo \ - vc4-fkms-v3d.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -531,6 +531,59 @@ Load: dtoverlay=dpi24 - Params: - - -+Name: draws -+Info: Configures the NW Digital Radio DRAWS Hat -+ -+ The board includes an ADC to measure various board values and also -+ provides two analog user inputs on the expansion header. The ADC -+ can be configured for various sample rates and gain values to adjust -+ the input range. Tables describing the two parameters follow. -+ -+ ADC Gain Values: -+ 0 = +/- 6.144V -+ 1 = +/- 4.096V -+ 2 = +/- 2.048V -+ 3 = +/- 1.024V -+ 4 = +/- 0.512V -+ 5 = +/- 0.256V -+ 6 = +/- 0.256V -+ 7 = +/- 0.256V -+ -+ ADC Datarate Values: -+ 0 = 128sps -+ 1 = 250sps -+ 2 = 490sps -+ 3 = 920sps -+ 4 = 1600sps (default) -+ 5 = 2400sps -+ 6 = 3300sps -+ 7 = 3300sps -+Load: dtoverlay=draws,= -+Params: draws_adc_ch4_gain Sets the full scale resolution of the ADCs -+ input voltage sensor (default 1) -+ -+ draws_adc_ch4_datarate Sets the datarate of the ADCs input voltage -+ sensor -+ -+ draws_adc_ch5_gain Sets the full scale resolution of the ADCs -+ 5V rail voltage sensor (default 1) -+ -+ draws_adc_ch5_datarate Sets the datarate of the ADCs 4V rail voltage -+ sensor -+ -+ draws_adc_ch6_gain Sets the full scale resolution of the ADCs -+ AIN2 input (default 2) -+ -+ draws_adc_ch6_datarate Sets the datarate of the ADCs AIN2 input -+ -+ draws_adc_ch7_gain Sets the full scale resolution of the ADCs -+ AIN3 input (default 2) -+ -+ draws_adc_ch7_datarate Sets the datarate of the ADCs AIN3 input -+ -+ alsaname Name of the ALSA audio device (default "draws") -+ -+ - Name: dwc-otg - Info: Selects the dwc_otg USB controller driver which has fiq support. This - is the default on all except the Pi Zero which defaults to dwc2. -@@ -2117,6 +2170,12 @@ Params: txd1_pin GPIO pin - rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) - - -+Name: udrc -+Info: Configures the NW Digital Radio UDRC Hat -+Load: dtoverlay=udrc,= -+Params: alsaname Name of the ALSA audio device (default "udrc") -+ -+ - Name: upstream - Info: Allow usage of downstream .dtb with upstream kernel. Comprises - vc4-kms-v3d, dwc2 and upstream-aux-interrupt overlays. ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/draws-overlay.dts -@@ -0,0 +1,200 @@ -+#include -+/* -+ * Device tree overlay for the DRAWS Hardware -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ udrc0_ldoin: udrc0_ldoin { -+ compatible = "regulator-fixed"; -+ regulator-name = "ldoin"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ }; -+ -+ pps: pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pps_pins>; -+ gpios = <&gpio 7 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ tlv320aic32x4: tlv320aic32x4@18 { -+ compatible = "ti,tlv320aic32x4"; -+ reg = <0x18>; -+ #sound-dai-cells = <0>; -+ status = "okay"; -+ -+ clocks = <&clocks BCM2835_CLOCK_GP0>; -+ clock-names = "mclk"; -+ assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; -+ assigned-clock-rates = <25000000>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gpclk0_pin &aic3204_reset>; -+ -+ reset-gpios = <&gpio 13 0>; -+ -+ iov-supply = <&udrc0_ldoin>; -+ ldoin-supply = <&udrc0_ldoin>; -+ }; -+ -+ sc16is752: sc16is752@50 { -+ compatible = "nxp,sc16is752"; -+ reg = <0x50>; -+ clocks = <&sc16is752_clk>; -+ interrupt-parent = <&gpio>; -+ interrupts = <17 2>; /* IRQ_TYPE_EDGE_FALLING */ -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sc16is752_irq>; -+ -+ sc16is752_clk: sc16is752_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <1843200>; -+ }; -+ }; -+ -+ tla2024: tla2024@48 { -+ compatible = "ti,ads1015"; -+ reg = <0x48>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ adc_ch4: channel@4 { -+ reg = <4>; -+ ti,gain = <1>; -+ ti,datarate = <4>; -+ }; -+ -+ adc_ch5: channel@5 { -+ reg = <5>; -+ ti,gain = <1>; -+ ti,datarate = <4>; -+ }; -+ -+ adc_ch6: channel@6 { -+ reg = <6>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ -+ adc_ch7: channel@7 { -+ reg = <7>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ snd: __overlay__ { -+ compatible = "simple-audio-card"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ simple-audio-card,name = "draws"; -+ simple-audio-card,format = "i2s"; -+ -+ simple-audio-card,bitclock-master = <&dailink0_master>; -+ simple-audio-card,frame-master = <&dailink0_master>; -+ -+ simple-audio-card,widgets = -+ "Line", "Line In", -+ "Line", "Line Out"; -+ -+ simple-audio-card,routing = -+ "IN1_R", "Line In", -+ "IN1_L", "Line In", -+ "CM_L", "Line In", -+ "CM_R", "Line In", -+ "Line Out", "LOR", -+ "Line Out", "LOL"; -+ -+ dailink0_master: simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ -+ simple-audio-card,codec { -+ sound-dai = <&tlv320aic32x4>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ gpclk0_pin: gpclk0_pin { -+ brcm,pins = <4>; -+ brcm,function = <4>; -+ }; -+ -+ aic3204_reset: aic3204_reset { -+ brcm,pins = <13>; -+ brcm,function = <1>; -+ brcm,pull = <1>; -+ }; -+ -+ aic3204_gpio: aic3204_gpio { -+ brcm,pins = <26>; -+ }; -+ -+ sc16is752_irq: sc16is752_irq { -+ brcm,pins = <17>; -+ brcm,function = <0>; -+ brcm,pull = <2>; -+ }; -+ -+ pps_pins: pps_pins { -+ brcm,pins = <7>; -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ draws_adc_ch4_gain = <&adc_ch4>,"ti,gain:0"; -+ draws_adc_ch4_datarate = <&adc_ch4>,"ti,datarate:0"; -+ draws_adc_ch5_gain = <&adc_ch5>,"ti,gain:0"; -+ draws_adc_ch5_datarate = <&adc_ch5>,"ti,datarate:0"; -+ draws_adc_ch6_gain = <&adc_ch6>,"ti,gain:0"; -+ draws_adc_ch6_datarate = <&adc_ch6>,"ti,datarate:0"; -+ draws_adc_ch7_gain = <&adc_ch7>,"ti,gain:0"; -+ draws_adc_ch7_datarate = <&adc_ch7>,"ti,datarate:0"; -+ alsaname = <&snd>, "simple-audio-card,name"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/udrc-overlay.dts -@@ -0,0 +1,128 @@ -+#include -+/* -+ * Device tree overlay for the Universal Digital Radio Controller -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ clocks = <&clocks BCM2835_CLOCK_PCM>; -+ clock-names = "pcm"; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ udrc0_ldoin: udrc0_ldoin { -+ compatible = "regulator-fixed"; -+ regulator-name = "ldoin"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ clock-frequency = <400000>; -+ -+ tlv320aic32x4: tlv320aic32x4@18 { -+ compatible = "ti,tlv320aic32x4"; -+ #sound-dai-cells = <0>; -+ reg = <0x18>; -+ status = "okay"; -+ -+ clocks = <&clocks BCM2835_CLOCK_GP0>; -+ clock-names = "mclk"; -+ assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; -+ assigned-clock-rates = <25000000>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gpclk0_pin &aic3204_reset>; -+ -+ reset-gpios = <&gpio 13 0>; -+ -+ iov-supply = <&udrc0_ldoin>; -+ ldoin-supply = <&udrc0_ldoin>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ snd: __overlay__ { -+ compatible = "simple-audio-card"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ simple-audio-card,name = "udrc"; -+ simple-audio-card,format = "i2s"; -+ -+ simple-audio-card,bitclock-master = <&dailink0_master>; -+ simple-audio-card,frame-master = <&dailink0_master>; -+ -+ simple-audio-card,widgets = -+ "Line", "Line In", -+ "Line", "Line Out"; -+ -+ simple-audio-card,routing = -+ "IN1_R", "Line In", -+ "IN1_L", "Line In", -+ "CM_L", "Line In", -+ "CM_R", "Line In", -+ "Line Out", "LOR", -+ "Line Out", "LOL"; -+ -+ dailink0_master: simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ -+ simple-audio-card,codec { -+ sound-dai = <&tlv320aic32x4>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ gpclk0_pin: gpclk0_pin { -+ brcm,pins = <4>; -+ brcm,function = <4>; -+ }; -+ -+ aic3204_reset: aic3204_reset { -+ brcm,pins = <13>; -+ brcm,function = <1>; -+ brcm,pull = <1>; -+ }; -+ -+ aic3204_gpio: aic3204_gpio { -+ brcm,pins = <26>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ alsaname = <&snd>, "simple-audio-card,name"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0415-staging-bcm2835-audio-Use-coherent-device-buffers.patch b/target/linux/brcm2708/patches-4.19/950-0415-staging-bcm2835-audio-Use-coherent-device-buffers.patch new file mode 100644 index 0000000000..dfd4b975f9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0415-staging-bcm2835-audio-Use-coherent-device-buffers.patch @@ -0,0 +1,61 @@ +From 8a01a25d0ad7e9d06f64fddae871deb91c3988ac Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:54 +0200 +Subject: [PATCH] staging: bcm2835-audio: Use coherent device buffers + +commit ad29c6e6cbf6f2af7362b043adad51a3be3d39c7 upstream. + +The memory access to the pages allocated with +SNDRV_DMA_TYPE_CONTINUOUS are basically non-coherent, and it becomes a +problem when a process accesses via mmap. + +For the more consistent access, use the device coherent memory, just +by replacing the call pattern in the allocator helpers. + +The only point we need to be careful for is the device object passed +there; since bcm2835-audio driver creates fake devices and each card +is created on top of that, we need to pass its parent device as the +real device object. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -345,8 +345,8 @@ int snd_bcm2835_new_pcm(struct bcm2835_c + + /* pre-allocation of buffers */ + /* NOTE: this may fail */ +- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, +- snd_dma_continuous_data(GFP_KERNEL), ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, ++ chip->card->dev->parent, + snd_bcm2835_playback_hw.buffer_bytes_max, + snd_bcm2835_playback_hw.buffer_bytes_max); + +@@ -371,8 +371,8 @@ int snd_bcm2835_new_spdif_pcm(struct bcm + + /* pre-allocation of buffers */ + /* NOTE: this may fail */ +- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, +- snd_dma_continuous_data(GFP_KERNEL), ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, ++ chip->card->dev->parent, + snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max); + + return 0; +@@ -404,8 +404,8 @@ int snd_bcm2835_new_simple_pcm(struct bc + + snd_pcm_lib_preallocate_pages_for_all( + pcm, +- SNDRV_DMA_TYPE_CONTINUOUS, +- snd_dma_continuous_data(GFP_KERNEL), ++ SNDRV_DMA_TYPE_DEV, ++ chip->card->dev->parent, + snd_bcm2835_playback_hw.buffer_bytes_max, + snd_bcm2835_playback_hw.buffer_bytes_max); + diff --git a/target/linux/brcm2708/patches-4.19/950-0416-dwc_otg-only-do_split-when-we-actually-need-to-do-a-.patch b/target/linux/brcm2708/patches-4.19/950-0416-dwc_otg-only-do_split-when-we-actually-need-to-do-a-.patch deleted file mode 100644 index 6b72edb0b3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0416-dwc_otg-only-do_split-when-we-actually-need-to-do-a-.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 0c988aed71773be4481b886ccf03c40a52f57cdb Mon Sep 17 00:00:00 2001 -From: P33M -Date: Mon, 8 Apr 2019 12:45:23 +0100 -Subject: [PATCH 416/806] dwc_otg: only do_split when we actually need to do a - split - -The previous test would fail if the root port was in fullspeed mode -and there was a hub between the FS device and the root port. While -the transfer worked, the schedule mangling performed for high-speed -split transfers would break leading to an 8ms polling interval. ---- - drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c | 9 ++++----- - 1 file changed, 4 insertions(+), 5 deletions(-) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c -@@ -167,8 +167,10 @@ void qh_init(dwc_otg_hcd_t * hcd, dwc_ot - char *speed, *type; - int dev_speed; - uint32_t hub_addr, hub_port; -+ hprt0_data_t hprt; - - dwc_memset(qh, 0, sizeof(dwc_otg_qh_t)); -+ hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); - - /* Initialize QH */ - qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); -@@ -191,9 +193,8 @@ void qh_init(dwc_otg_hcd_t * hcd, dwc_ot - - qh->nak_frame = 0xffff; - -- if (((dev_speed == USB_SPEED_LOW) || -- (dev_speed == USB_SPEED_FULL)) && -- (hub_addr != 0 && hub_addr != 1)) { -+ if (hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED && -+ dev_speed != USB_SPEED_HIGH) { - DWC_DEBUGPL(DBG_HCD, - "QH init: EP %d: TT found at hub addr %d, for port %d\n", - dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr, -@@ -204,7 +205,6 @@ void qh_init(dwc_otg_hcd_t * hcd, dwc_ot - - if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) { - /* Compute scheduling parameters once and save them. */ -- hprt0_data_t hprt; - - /** @todo Account for split transfers in the bus time. */ - int bytecount = -@@ -219,7 +219,6 @@ void qh_init(dwc_otg_hcd_t * hcd, dwc_ot - SCHEDULE_SLOP); - qh->interval = urb->interval; - -- hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); - if (hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) { - if (dev_speed == USB_SPEED_LOW || - dev_speed == USB_SPEED_FULL) { diff --git a/target/linux/brcm2708/patches-4.19/950-0416-staging-bcm2835-audio-Set-SNDRV_PCM_INFO_SYNC_APPLPT.patch b/target/linux/brcm2708/patches-4.19/950-0416-staging-bcm2835-audio-Set-SNDRV_PCM_INFO_SYNC_APPLPT.patch new file mode 100644 index 0000000000..5b38ca5e31 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0416-staging-bcm2835-audio-Set-SNDRV_PCM_INFO_SYNC_APPLPT.patch @@ -0,0 +1,40 @@ +From 27417ac1fa4894dc46d71cc34af17fe6a5186f2f Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:55 +0200 +Subject: [PATCH] staging: bcm2835-audio: Set + SNDRV_PCM_INFO_SYNC_APPLPTR + +commit b59d6a5f73501f74848d6700101e7736afe3d54a upstream. + +The recent ALSA PCM core supports the SNDRV_PCM_INFO_SYNC_APPLPTR flag +indicating that the driver needs the ack call at each appl_ptr +update. This is requirement for the indirect PCM implementations like +bcm2835-audio driver, too. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -12,7 +12,7 @@ + static const struct snd_pcm_hardware snd_bcm2835_playback_hw = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | +- SNDRV_PCM_INFO_DRAIN_TRIGGER), ++ SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR), + .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, + .rate_min = 8000, +@@ -29,7 +29,7 @@ static const struct snd_pcm_hardware snd + static const struct snd_pcm_hardware snd_bcm2835_playback_spdif_hw = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | +- SNDRV_PCM_INFO_DRAIN_TRIGGER), ++ SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000, diff --git a/target/linux/brcm2708/patches-4.19/950-0417-Input-ili210x-fetch-touchscreen-geometry-from-DT.patch b/target/linux/brcm2708/patches-4.19/950-0417-Input-ili210x-fetch-touchscreen-geometry-from-DT.patch deleted file mode 100644 index abe176ee1a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0417-Input-ili210x-fetch-touchscreen-geometry-from-DT.patch +++ /dev/null @@ -1,490 +0,0 @@ -From 9c823e2ee1ec1b815b8ec29c231b112c5e397202 Mon Sep 17 00:00:00 2001 -From: Samuel Hsu -Date: Mon, 8 Apr 2019 16:42:17 +0200 -Subject: [PATCH 417/806] Input: ili210x - fetch touchscreen geometry from DT - -commit f67cc3e927d8414ad3872e046764534ea1f5db0d upstream - -Fetching the geometry from the ILI251x registers seems unreliable and -sometimes returns all zeroes. Add support for fetching the geometry and -axis inversion from DT instead. - -Signed-off-by: Marek Vasut -Signed-off-by: Dmitry Torokhov ---- - drivers/input/touchscreen/ili210x.c | 321 +++++++++++++++++----------- - 1 file changed, 194 insertions(+), 127 deletions(-) - ---- a/drivers/input/touchscreen/ili210x.c -+++ b/drivers/input/touchscreen/ili210x.c -@@ -4,11 +4,15 @@ - #include - #include - #include -+#include - #include - #include --#include -+#include -+#include -+#include - --#define MAX_TOUCHES 2 -+#define ILI210X_TOUCHES 2 -+#define ILI251X_TOUCHES 10 - #define DEFAULT_POLL_PERIOD 20 - - /* Touchscreen commands */ -@@ -17,41 +21,32 @@ - #define REG_FIRMWARE_VERSION 0x40 - #define REG_CALIBRATE 0xcc - --struct finger { -- u8 x_low; -- u8 x_high; -- u8 y_low; -- u8 y_high; --} __packed; -- --struct touchdata { -- u8 status; -- struct finger finger[MAX_TOUCHES]; --} __packed; -- --struct panel_info { -- struct finger finger_max; -- u8 xchannel_num; -- u8 ychannel_num; --} __packed; -- - struct firmware_version { - u8 id; - u8 major; - u8 minor; - } __packed; - -+enum ili2xxx_model { -+ MODEL_ILI210X, -+ MODEL_ILI251X, -+}; -+ - struct ili210x { - struct i2c_client *client; - struct input_dev *input; -- bool (*get_pendown_state)(void); - unsigned int poll_period; - struct delayed_work dwork; -+ struct gpio_desc *reset_gpio; -+ struct touchscreen_properties prop; -+ enum ili2xxx_model model; -+ unsigned int max_touches; - }; - - static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, - size_t len) - { -+ struct ili210x *priv = i2c_get_clientdata(client); - struct i2c_msg msg[2] = { - { - .addr = client->addr, -@@ -67,7 +62,38 @@ static int ili210x_read_reg(struct i2c_c - } - }; - -- if (i2c_transfer(client->adapter, msg, 2) != 2) { -+ if (priv->model == MODEL_ILI251X) { -+ if (i2c_transfer(client->adapter, msg, 1) != 1) { -+ dev_err(&client->dev, "i2c transfer failed\n"); -+ return -EIO; -+ } -+ -+ usleep_range(5000, 5500); -+ -+ if (i2c_transfer(client->adapter, msg + 1, 1) != 1) { -+ dev_err(&client->dev, "i2c transfer failed\n"); -+ return -EIO; -+ } -+ } else { -+ if (i2c_transfer(client->adapter, msg, 2) != 2) { -+ dev_err(&client->dev, "i2c transfer failed\n"); -+ return -EIO; -+ } -+ } -+ -+ return 0; -+} -+ -+static int ili210x_read(struct i2c_client *client, void *buf, size_t len) -+{ -+ struct i2c_msg msg = { -+ .addr = client->addr, -+ .flags = I2C_M_RD, -+ .len = len, -+ .buf = buf, -+ }; -+ -+ if (i2c_transfer(client->adapter, &msg, 1) != 1) { - dev_err(&client->dev, "i2c transfer failed\n"); - return -EIO; - } -@@ -75,42 +101,72 @@ static int ili210x_read_reg(struct i2c_c - return 0; - } - --static void ili210x_report_events(struct input_dev *input, -- const struct touchdata *touchdata) -+static bool ili210x_touchdata_to_coords(struct ili210x *priv, u8 *touchdata, -+ unsigned int finger, -+ unsigned int *x, unsigned int *y) - { -- int i; -- bool touch; -- unsigned int x, y; -- const struct finger *finger; -+ if (finger >= ILI210X_TOUCHES) -+ return false; - -- for (i = 0; i < MAX_TOUCHES; i++) { -- input_mt_slot(input, i); -+ if (touchdata[0] & BIT(finger)) -+ return false; - -- finger = &touchdata->finger[i]; -+ *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); -+ *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); - -- touch = touchdata->status & (1 << i); -- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); -- if (touch) { -- x = finger->x_low | (finger->x_high << 8); -- y = finger->y_low | (finger->y_high << 8); -+ return true; -+} -+ -+static bool ili251x_touchdata_to_coords(struct ili210x *priv, u8 *touchdata, -+ unsigned int finger, -+ unsigned int *x, unsigned int *y) -+{ -+ if (finger >= ILI251X_TOUCHES) -+ return false; -+ -+ *x = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); -+ if (!(*x & BIT(15))) /* Touch indication */ -+ return false; -+ -+ *x &= 0x3fff; -+ *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2); -+ -+ return true; -+} -+ -+static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata) -+{ -+ struct input_dev *input = priv->input; -+ int i; -+ bool contact = false, touch = false; -+ unsigned int x = 0, y = 0; - -- input_report_abs(input, ABS_MT_POSITION_X, x); -- input_report_abs(input, ABS_MT_POSITION_Y, y); -+ for (i = 0; i < priv->max_touches; i++) { -+ if (priv->model == MODEL_ILI210X) { -+ touch = ili210x_touchdata_to_coords(priv, touchdata, -+ i, &x, &y); -+ } else if (priv->model == MODEL_ILI251X) { -+ touch = ili251x_touchdata_to_coords(priv, touchdata, -+ i, &x, &y); -+ if (touch) -+ contact = true; - } -+ -+ input_mt_slot(input, i); -+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); -+ if (!touch) -+ continue; -+ touchscreen_report_pos(input, &priv->prop, x, y, -+ true); - } - - input_mt_report_pointer_emulation(input, false); - input_sync(input); --} - --static bool get_pendown_state(const struct ili210x *priv) --{ -- bool state = false; -- -- if (priv->get_pendown_state) -- state = priv->get_pendown_state(); -+ if (priv->model == MODEL_ILI210X) -+ contact = touchdata[0] & 0xf3; - -- return state; -+ return contact; - } - - static void ili210x_work(struct work_struct *work) -@@ -118,20 +174,29 @@ static void ili210x_work(struct work_str - struct ili210x *priv = container_of(work, struct ili210x, - dwork.work); - struct i2c_client *client = priv->client; -- struct touchdata touchdata; -- int error; -+ u8 touchdata[64] = { 0 }; -+ bool touch; -+ int error = -EINVAL; -+ -+ if (priv->model == MODEL_ILI210X) { -+ error = ili210x_read_reg(client, REG_TOUCHDATA, -+ touchdata, sizeof(touchdata)); -+ } else if (priv->model == MODEL_ILI251X) { -+ error = ili210x_read_reg(client, REG_TOUCHDATA, -+ touchdata, 31); -+ if (!error && touchdata[0] == 2) -+ error = ili210x_read(client, &touchdata[31], 20); -+ } - -- error = ili210x_read_reg(client, REG_TOUCHDATA, -- &touchdata, sizeof(touchdata)); - if (error) { - dev_err(&client->dev, - "Unable to get touchdata, err = %d\n", error); - return; - } - -- ili210x_report_events(priv->input, &touchdata); -+ touch = ili210x_report_events(priv, touchdata); - -- if ((touchdata.status & 0xf3) || get_pendown_state(priv)) -+ if (touch) - schedule_delayed_work(&priv->dwork, - msecs_to_jiffies(priv->poll_period)); - } -@@ -180,30 +245,76 @@ static const struct attribute_group ili2 - .attrs = ili210x_attributes, - }; - -+static void ili210x_power_down(void *data) -+{ -+ struct gpio_desc *reset_gpio = data; -+ -+ gpiod_set_value_cansleep(reset_gpio, 1); -+} -+ -+static void ili210x_cancel_work(void *data) -+{ -+ struct ili210x *priv = data; -+ -+ cancel_delayed_work_sync(&priv->dwork); -+} -+ - static int ili210x_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) - { - struct device *dev = &client->dev; -- const struct ili210x_platform_data *pdata = dev_get_platdata(dev); - struct ili210x *priv; -+ struct gpio_desc *reset_gpio; - struct input_dev *input; -- struct panel_info panel; - struct firmware_version firmware; -- int xmax, ymax; -+ enum ili2xxx_model model; - int error; - -- dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); -+ model = (enum ili2xxx_model)id->driver_data; - -- if (!pdata) { -- dev_err(dev, "No platform data!\n"); -- return -EINVAL; -- } -+ dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); - - if (client->irq <= 0) { - dev_err(dev, "No IRQ!\n"); - return -EINVAL; - } - -+ reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); -+ if (IS_ERR(reset_gpio)) -+ return PTR_ERR(reset_gpio); -+ -+ if (reset_gpio) { -+ error = devm_add_action_or_reset(dev, ili210x_power_down, -+ reset_gpio); -+ if (error) -+ return error; -+ -+ usleep_range(50, 100); -+ gpiod_set_value_cansleep(reset_gpio, 0); -+ msleep(100); -+ } -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ input = devm_input_allocate_device(dev); -+ if (!input) -+ return -ENOMEM; -+ -+ priv->client = client; -+ priv->input = input; -+ priv->poll_period = DEFAULT_POLL_PERIOD; -+ INIT_DELAYED_WORK(&priv->dwork, ili210x_work); -+ priv->reset_gpio = reset_gpio; -+ priv->model = model; -+ if (model == MODEL_ILI210X) -+ priv->max_touches = ILI210X_TOUCHES; -+ if (model == MODEL_ILI251X) -+ priv->max_touches = ILI251X_TOUCHES; -+ -+ i2c_set_clientdata(client, priv); -+ - /* Get firmware version */ - error = ili210x_read_reg(client, REG_FIRMWARE_VERSION, - &firmware, sizeof(firmware)); -@@ -213,70 +324,40 @@ static int ili210x_i2c_probe(struct i2c_ - return error; - } - -- /* get panel info */ -- error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel)); -- if (error) { -- dev_err(dev, "Failed to get panel information, err: %d\n", -- error); -- return error; -- } -- -- xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8); -- ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8); -- -- priv = kzalloc(sizeof(*priv), GFP_KERNEL); -- input = input_allocate_device(); -- if (!priv || !input) { -- error = -ENOMEM; -- goto err_free_mem; -- } -- -- priv->client = client; -- priv->input = input; -- priv->get_pendown_state = pdata->get_pendown_state; -- priv->poll_period = pdata->poll_period ? : DEFAULT_POLL_PERIOD; -- INIT_DELAYED_WORK(&priv->dwork, ili210x_work); -- - /* Setup input device */ - input->name = "ILI210x Touchscreen"; - input->id.bustype = BUS_I2C; - input->dev.parent = dev; - -- __set_bit(EV_SYN, input->evbit); -- __set_bit(EV_KEY, input->evbit); -- __set_bit(EV_ABS, input->evbit); -- __set_bit(BTN_TOUCH, input->keybit); -- -- /* Single touch */ -- input_set_abs_params(input, ABS_X, 0, xmax, 0, 0); -- input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0); -- - /* Multi touch */ -- input_mt_init_slots(input, MAX_TOUCHES, 0); -- input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0); -- input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0); -+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, 0xffff, 0, 0); -+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 0xffff, 0, 0); -+ touchscreen_parse_properties(input, true, &priv->prop); -+ input_mt_init_slots(input, priv->max_touches, INPUT_MT_DIRECT); - -- i2c_set_clientdata(client, priv); -+ error = devm_add_action(dev, ili210x_cancel_work, priv); -+ if (error) -+ return error; - -- error = request_irq(client->irq, ili210x_irq, pdata->irq_flags, -- client->name, priv); -+ error = devm_request_irq(dev, client->irq, ili210x_irq, 0, -+ client->name, priv); - if (error) { - dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", - error); -- goto err_free_mem; -+ return error; - } - -- error = sysfs_create_group(&dev->kobj, &ili210x_attr_group); -+ error = devm_device_add_group(dev, &ili210x_attr_group); - if (error) { - dev_err(dev, "Unable to create sysfs attributes, err: %d\n", - error); -- goto err_free_irq; -+ return error; - } - - error = input_register_device(priv->input); - if (error) { - dev_err(dev, "Cannot register input device, err: %d\n", error); -- goto err_remove_sysfs; -+ return error; - } - - device_init_wakeup(dev, 1); -@@ -286,28 +367,6 @@ static int ili210x_i2c_probe(struct i2c_ - client->irq, firmware.id, firmware.major, firmware.minor); - - return 0; -- --err_remove_sysfs: -- sysfs_remove_group(&dev->kobj, &ili210x_attr_group); --err_free_irq: -- free_irq(client->irq, priv); --err_free_mem: -- input_free_device(input); -- kfree(priv); -- return error; --} -- --static int ili210x_i2c_remove(struct i2c_client *client) --{ -- struct ili210x *priv = i2c_get_clientdata(client); -- -- sysfs_remove_group(&client->dev.kobj, &ili210x_attr_group); -- free_irq(priv->client->irq, priv); -- cancel_delayed_work_sync(&priv->dwork); -- input_unregister_device(priv->input); -- kfree(priv); -- -- return 0; - } - - static int __maybe_unused ili210x_i2c_suspend(struct device *dev) -@@ -334,19 +393,27 @@ static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm, - ili210x_i2c_suspend, ili210x_i2c_resume); - - static const struct i2c_device_id ili210x_i2c_id[] = { -- { "ili210x", 0 }, -+ { "ili210x", MODEL_ILI210X }, -+ { "ili251x", MODEL_ILI251X }, - { } - }; - MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); - -+static const struct of_device_id ili210x_dt_ids[] = { -+ { .compatible = "ilitek,ili210x", .data = (void *)MODEL_ILI210X }, -+ { .compatible = "ilitek,ili251x", .data = (void *)MODEL_ILI251X }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, ili210x_dt_ids); -+ - static struct i2c_driver ili210x_ts_driver = { - .driver = { - .name = "ili210x_i2c", - .pm = &ili210x_i2c_pm, -+ .of_match_table = ili210x_dt_ids, - }, - .id_table = ili210x_i2c_id, - .probe = ili210x_i2c_probe, -- .remove = ili210x_i2c_remove, - }; - - module_i2c_driver(ili210x_ts_driver); diff --git a/target/linux/brcm2708/patches-4.19/950-0417-staging-bcm2835-audio-Simplify-PCM-creation-helpers.patch b/target/linux/brcm2708/patches-4.19/950-0417-staging-bcm2835-audio-Simplify-PCM-creation-helpers.patch new file mode 100644 index 0000000000..6ead1b4ccf --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0417-staging-bcm2835-audio-Simplify-PCM-creation-helpers.patch @@ -0,0 +1,196 @@ +From 706f9b2b95a2fff44f92deada99545036c249658 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:56 +0200 +Subject: [PATCH] staging: bcm2835-audio: Simplify PCM creation helpers + +commit 74470ffeb9aed5548654cfca881bf1d7469fe9c4 upstream. + +All three functions to create PCM objects are fairly resemble, and can +be unified to a single common helper. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 87 ++++--------------- + .../vc04_services/bcm2835-audio/bcm2835.c | 17 +++- + .../vc04_services/bcm2835-audio/bcm2835.h | 9 +- + 3 files changed, 32 insertions(+), 81 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -324,91 +324,36 @@ static const struct snd_pcm_ops snd_bcm2 + }; + + /* create a pcm device */ +-int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, u32 numchannels) ++int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name, ++ int idx, enum snd_bcm2835_route route, ++ u32 numchannels, bool spdif) + { + struct snd_pcm *pcm; + int err; + +- err = snd_pcm_new(chip->card, "bcm2835 ALSA", 0, numchannels, 0, &pcm); +- if (err < 0) +- return err; +- pcm->private_data = chip; +- pcm->nonatomic = true; +- strcpy(pcm->name, "bcm2835 ALSA"); +- chip->pcm = pcm; +- chip->dest = AUDIO_DEST_AUTO; +- chip->volume = 0; +- chip->mute = CTRL_VOL_UNMUTE; /*disable mute on startup */ +- /* set operators */ +- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, +- &snd_bcm2835_playback_ops); +- +- /* pre-allocation of buffers */ +- /* NOTE: this may fail */ +- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, +- chip->card->dev->parent, +- snd_bcm2835_playback_hw.buffer_bytes_max, +- snd_bcm2835_playback_hw.buffer_bytes_max); +- +- return 0; +-} +- +-int snd_bcm2835_new_spdif_pcm(struct bcm2835_chip *chip) +-{ +- struct snd_pcm *pcm; +- int err; +- +- err = snd_pcm_new(chip->card, "bcm2835 ALSA", 1, 1, 0, &pcm); +- if (err < 0) +- return err; +- +- pcm->private_data = chip; +- pcm->nonatomic = true; +- strcpy(pcm->name, "bcm2835 IEC958/HDMI"); +- chip->pcm_spdif = pcm; +- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, +- &snd_bcm2835_playback_spdif_ops); +- +- /* pre-allocation of buffers */ +- /* NOTE: this may fail */ +- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, +- chip->card->dev->parent, +- snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max); +- +- return 0; +-} +- +-int snd_bcm2835_new_simple_pcm(struct bcm2835_chip *chip, +- const char *name, +- enum snd_bcm2835_route route, +- u32 numchannels) +-{ +- struct snd_pcm *pcm; +- int err; +- +- err = snd_pcm_new(chip->card, name, 0, numchannels, +- 0, &pcm); ++ err = snd_pcm_new(chip->card, name, idx, numchannels, 0, &pcm); + if (err) + return err; + + pcm->private_data = chip; + pcm->nonatomic = true; + strcpy(pcm->name, name); +- chip->pcm = pcm; +- chip->dest = route; +- chip->volume = 0; +- chip->mute = CTRL_VOL_UNMUTE; ++ if (!spdif) { ++ chip->dest = route; ++ chip->volume = 0; ++ chip->mute = CTRL_VOL_UNMUTE; ++ } + + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ++ spdif ? &snd_bcm2835_playback_spdif_ops : + &snd_bcm2835_playback_ops); + +- snd_pcm_lib_preallocate_pages_for_all( +- pcm, +- SNDRV_DMA_TYPE_DEV, +- chip->card->dev->parent, +- snd_bcm2835_playback_hw.buffer_bytes_max, +- snd_bcm2835_playback_hw.buffer_bytes_max); ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, ++ chip->card->dev->parent, 128 * 1024, 128 * 1024); + ++ if (spdif) ++ chip->pcm_spdif = pcm; ++ else ++ chip->pcm = pcm; + return 0; + } +- +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -138,17 +138,26 @@ static int bcm2835_audio_alsa_newpcm(str + { + int err; + +- err = snd_bcm2835_new_pcm(chip, numchannels - 1); ++ err = snd_bcm2835_new_pcm(chip, "bcm2835 ALSA", 0, AUDIO_DEST_AUTO, ++ numchannels - 1, false); + if (err) + return err; + +- err = snd_bcm2835_new_spdif_pcm(chip); ++ err = snd_bcm2835_new_pcm(chip, "bcm2835 IEC958/HDMI", 1, 0, 1, true); + if (err) + return err; + + return 0; + } + ++static int bcm2835_audio_simple_newpcm(struct bcm2835_chip *chip, ++ const char *name, ++ enum snd_bcm2835_route route, ++ u32 numchannels) ++{ ++ return snd_bcm2835_new_pcm(chip, name, 0, route, numchannels, false); ++} ++ + static struct bcm2835_audio_driver bcm2835_audio_alsa = { + .driver = { + .name = "bcm2835_alsa", +@@ -169,7 +178,7 @@ static struct bcm2835_audio_driver bcm28 + .shortname = "bcm2835 HDMI", + .longname = "bcm2835 HDMI", + .minchannels = 1, +- .newpcm = snd_bcm2835_new_simple_pcm, ++ .newpcm = bcm2835_audio_simple_newpcm, + .newctl = snd_bcm2835_new_hdmi_ctl, + .route = AUDIO_DEST_HDMI + }; +@@ -182,7 +191,7 @@ static struct bcm2835_audio_driver bcm28 + .shortname = "bcm2835 Headphones", + .longname = "bcm2835 Headphones", + .minchannels = 1, +- .newpcm = snd_bcm2835_new_simple_pcm, ++ .newpcm = bcm2835_audio_simple_newpcm, + .newctl = snd_bcm2835_new_headphones_ctl, + .route = AUDIO_DEST_HEADPHONES + }; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -84,12 +84,9 @@ struct bcm2835_alsa_stream { + }; + + int snd_bcm2835_new_ctl(struct bcm2835_chip *chip); +-int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, u32 numchannels); +-int snd_bcm2835_new_spdif_pcm(struct bcm2835_chip *chip); +-int snd_bcm2835_new_simple_pcm(struct bcm2835_chip *chip, +- const char *name, +- enum snd_bcm2835_route route, +- u32 numchannels); ++int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name, ++ int idx, enum snd_bcm2835_route route, ++ u32 numchannels, bool spdif); + + int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip); + int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip); diff --git a/target/linux/brcm2708/patches-4.19/950-0418-Input-ili210x-add-DT-binding-document.patch b/target/linux/brcm2708/patches-4.19/950-0418-Input-ili210x-add-DT-binding-document.patch deleted file mode 100644 index 2d968fde69..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0418-Input-ili210x-add-DT-binding-document.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 9ee66e1acf33fd1dcf4beb8a6fce4fdade01ab05 Mon Sep 17 00:00:00 2001 -From: Samuel Hsu -Date: Mon, 8 Apr 2019 16:49:51 +0200 -Subject: [PATCH 418/806] Input: ili210x - add DT binding document - -commit 41a852e002e65ab7a1e6841b485d72d022e95df2 upstream - -Add DT binding document for the Ilitek ILI210x and ILI251x -touchscreen controllers. - -Signed-off-by: Marek Vasut -Reviewed-by: Rob Herring -Signed-off-by: Dmitry Torokhov ---- - .../bindings/input/ilitek,ili2xxx.txt | 26 +++++++++++++++++++ - 1 file changed, 26 insertions(+) - create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt -@@ -0,0 +1,26 @@ -+Ilitek ILI210x/ILI251x touchscreen controller -+ -+Required properties: -+- compatible: -+ ilitek,ili210x for ILI210x -+ ilitek,ili251x for ILI251x -+ -+- reg: The I2C address of the device -+ -+- interrupts: The sink for the touchscreen's IRQ output -+ See ../interrupt-controller/interrupts.txt -+ -+Optional properties for main touchpad device: -+ -+- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) -+ -+Example: -+ -+ touchscreen@41 { -+ compatible = "ilitek,ili251x"; -+ reg = <0x41>; -+ interrupt-parent = <&gpio4>; -+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>; -+ reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; -+ }; -+ diff --git a/target/linux/brcm2708/patches-4.19/950-0418-staging-bcm2835-audio-Simplify-kctl-creation-helpers.patch b/target/linux/brcm2708/patches-4.19/950-0418-staging-bcm2835-audio-Simplify-kctl-creation-helpers.patch new file mode 100644 index 0000000000..ec0530ba2a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0418-staging-bcm2835-audio-Simplify-kctl-creation-helpers.patch @@ -0,0 +1,161 @@ +From c4766c1589a25608ffe6848722632be2f65d0951 Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:57 +0200 +Subject: [PATCH] staging: bcm2835-audio: Simplify kctl creation + helpers + +commit dc5c0eb1e8601206dffbfc302cbd190f89dcd040 upstream. + +Just a minor code refactoring and adding some const prefix. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 69 +++++++------------ + 1 file changed, 25 insertions(+), 44 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c +@@ -97,40 +97,34 @@ static int snd_bcm2835_ctl_put(struct sn + + static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, CTRL_VOL_MIN, 1, 1); + +-static struct snd_kcontrol_new snd_bcm2835_ctl[] = { ++static const struct snd_kcontrol_new snd_bcm2835_ctl[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "PCM Playback Volume", +- .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .private_value = PCM_PLAYBACK_VOLUME, + .info = snd_bcm2835_ctl_info, + .get = snd_bcm2835_ctl_get, + .put = snd_bcm2835_ctl_put, +- .count = 1, + .tlv = {.p = snd_bcm2835_db_scale} + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "PCM Playback Switch", +- .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .private_value = PCM_PLAYBACK_MUTE, + .info = snd_bcm2835_ctl_info, + .get = snd_bcm2835_ctl_get, + .put = snd_bcm2835_ctl_put, +- .count = 1, + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "PCM Playback Route", +- .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .private_value = PCM_PLAYBACK_DEVICE, + .info = snd_bcm2835_ctl_info, + .get = snd_bcm2835_ctl_get, + .put = snd_bcm2835_ctl_put, +- .count = 1, + }, + }; + +@@ -196,7 +190,7 @@ static int snd_bcm2835_spdif_mask_get(st + return 0; + } + +-static struct snd_kcontrol_new snd_bcm2835_spdif[] = { ++static const struct snd_kcontrol_new snd_bcm2835_spdif[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), +@@ -213,28 +207,32 @@ static struct snd_kcontrol_new snd_bcm28 + }, + }; + +-int snd_bcm2835_new_ctl(struct bcm2835_chip *chip) ++static int create_ctls(struct bcm2835_chip *chip, size_t size, ++ const struct snd_kcontrol_new *kctls) + { +- int err; +- unsigned int idx; ++ int i, err; + +- strcpy(chip->card->mixername, "Broadcom Mixer"); +- for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) { +- err = snd_ctl_add(chip->card, +- snd_ctl_new1(&snd_bcm2835_ctl[idx], chip)); +- if (err < 0) +- return err; +- } +- for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_spdif); idx++) { +- err = snd_ctl_add(chip->card, +- snd_ctl_new1(&snd_bcm2835_spdif[idx], chip)); ++ for (i = 0; i < size; i++) { ++ err = snd_ctl_add(chip->card, snd_ctl_new1(&kctls[i], chip)); + if (err < 0) + return err; + } + return 0; + } + +-static struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = { ++int snd_bcm2835_new_ctl(struct bcm2835_chip *chip) ++{ ++ int err; ++ ++ strcpy(chip->card->mixername, "Broadcom Mixer"); ++ err = create_ctls(chip, ARRAY_SIZE(snd_bcm2835_ctl), snd_bcm2835_ctl); ++ if (err < 0) ++ return err; ++ return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_spdif), ++ snd_bcm2835_spdif); ++} ++ ++static const struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Headphone Playback Volume", +@@ -263,21 +261,12 @@ static struct snd_kcontrol_new snd_bcm28 + + int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip) + { +- int err; +- unsigned int idx; +- + strcpy(chip->card->mixername, "Broadcom Mixer"); +- for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_headphones_ctl); idx++) { +- err = snd_ctl_add(chip->card, +- snd_ctl_new1(&snd_bcm2835_headphones_ctl[idx], +- chip)); +- if (err) +- return err; +- } +- return 0; ++ return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_headphones_ctl), ++ snd_bcm2835_headphones_ctl); + } + +-static struct snd_kcontrol_new snd_bcm2835_hdmi[] = { ++static const struct snd_kcontrol_new snd_bcm2835_hdmi[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "HDMI Playback Volume", +@@ -306,16 +295,8 @@ static struct snd_kcontrol_new snd_bcm28 + + int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip) + { +- int err; +- unsigned int idx; +- + strcpy(chip->card->mixername, "Broadcom Mixer"); +- for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_hdmi); idx++) { +- err = snd_ctl_add(chip->card, +- snd_ctl_new1(&snd_bcm2835_hdmi[idx], chip)); +- if (err) +- return err; +- } +- return 0; ++ return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_hdmi), ++ snd_bcm2835_hdmi); + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0419-staging-bcm2835-audio-Simplify-card-object-managemen.patch b/target/linux/brcm2708/patches-4.19/950-0419-staging-bcm2835-audio-Simplify-card-object-managemen.patch new file mode 100644 index 0000000000..523e54361d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0419-staging-bcm2835-audio-Simplify-card-object-managemen.patch @@ -0,0 +1,212 @@ +From b19ed31a1ced7b6d4c4c04967a509d91a134e5bb Mon Sep 17 00:00:00 2001 +From: Takashi Iwai +Date: Tue, 4 Sep 2018 17:58:58 +0200 +Subject: [PATCH] staging: bcm2835-audio: Simplify card object + management + +commit 872ae2d63d516a2a3b9c833d8685afcfa7814542 upstream. + +Instead of creating a dummy child device to manage the card object, +just use devm stuff directly for releasing with snd_card_free(). +This results in a lot of code reduction. + +Since the dummy child devices are gone, the device object to be passed +to the memory allocator needs to be adjusted as well. + +Signed-off-by: Takashi Iwai +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 +- + .../vc04_services/bcm2835-audio/bcm2835.c | 120 +++++------------- + 2 files changed, 33 insertions(+), 89 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -349,7 +349,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_c + &snd_bcm2835_playback_ops); + + snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, +- chip->card->dev->parent, 128 * 1024, 128 * 1024); ++ chip->card->dev, 128 * 1024, 128 * 1024); + + if (spdif) + chip->pcm_spdif = pcm; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -22,38 +22,6 @@ module_param(enable_compat_alsa, bool, 0 + MODULE_PARM_DESC(enable_compat_alsa, + "Enables ALSA compatibility virtual audio device"); + +-static void snd_devm_unregister_child(struct device *dev, void *res) +-{ +- struct device *childdev = *(struct device **)res; +- struct bcm2835_chip *chip = dev_get_drvdata(childdev); +- struct snd_card *card = chip->card; +- +- snd_card_free(card); +- +- device_unregister(childdev); +-} +- +-static int snd_devm_add_child(struct device *dev, struct device *child) +-{ +- struct device **dr; +- int ret; +- +- dr = devres_alloc(snd_devm_unregister_child, sizeof(*dr), GFP_KERNEL); +- if (!dr) +- return -ENOMEM; +- +- ret = device_add(child); +- if (ret) { +- devres_free(dr); +- return ret; +- } +- +- *dr = child; +- devres_add(dev, dr); +- +- return 0; +-} +- + static void bcm2835_devm_free_vchi_ctx(struct device *dev, void *res) + { + struct bcm2835_vchi_ctx *vchi_ctx = res; +@@ -84,36 +52,6 @@ static int bcm2835_devm_add_vchi_ctx(str + return 0; + } + +-static void snd_bcm2835_release(struct device *dev) +-{ +-} +- +-static struct device * +-snd_create_device(struct device *parent, +- struct device_driver *driver, +- const char *name) +-{ +- struct device *device; +- int ret; +- +- device = devm_kzalloc(parent, sizeof(*device), GFP_KERNEL); +- if (!device) +- return ERR_PTR(-ENOMEM); +- +- device_initialize(device); +- device->parent = parent; +- device->driver = driver; +- device->release = snd_bcm2835_release; +- +- dev_set_name(device, "%s", name); +- +- ret = snd_devm_add_child(parent, device); +- if (ret) +- return ERR_PTR(ret); +- +- return device; +-} +- + typedef int (*bcm2835_audio_newpcm_func)(struct bcm2835_chip *chip, + const char *name, + enum snd_bcm2835_route route, +@@ -216,40 +154,36 @@ static struct bcm2835_audio_drivers chil + }, + }; + +-static int snd_add_child_device(struct device *device, ++static void bcm2835_card_free(void *data) ++{ ++ snd_card_free(data); ++} ++ ++static int snd_add_child_device(struct device *dev, + struct bcm2835_audio_driver *audio_driver, + u32 numchans) + { + struct snd_card *card; +- struct device *child; + struct bcm2835_chip *chip; + int err; + +- child = snd_create_device(device, &audio_driver->driver, +- audio_driver->driver.name); +- if (IS_ERR(child)) { +- dev_err(device, +- "Unable to create child device %p, error %ld", +- audio_driver->driver.name, +- PTR_ERR(child)); +- return PTR_ERR(child); +- } +- +- err = snd_card_new(child, -1, NULL, THIS_MODULE, sizeof(*chip), &card); ++ err = snd_card_new(dev, -1, NULL, THIS_MODULE, sizeof(*chip), &card); + if (err < 0) { +- dev_err(child, "Failed to create card"); ++ dev_err(dev, "Failed to create card"); + return err; + } + + chip = card->private_data; + chip->card = card; +- chip->dev = child; ++ chip->dev = dev; + mutex_init(&chip->audio_mutex); + +- chip->vchi_ctx = devres_find(device, ++ chip->vchi_ctx = devres_find(dev, + bcm2835_devm_free_vchi_ctx, NULL, NULL); +- if (!chip->vchi_ctx) +- return -ENODEV; ++ if (!chip->vchi_ctx) { ++ err = -ENODEV; ++ goto error; ++ } + + strcpy(card->driver, audio_driver->driver.name); + strcpy(card->shortname, audio_driver->shortname); +@@ -259,26 +193,36 @@ static int snd_add_child_device(struct d + audio_driver->route, + numchans); + if (err) { +- dev_err(child, "Failed to create pcm, error %d\n", err); +- return err; ++ dev_err(dev, "Failed to create pcm, error %d\n", err); ++ goto error; + } + + err = audio_driver->newctl(chip); + if (err) { +- dev_err(child, "Failed to create controls, error %d\n", err); +- return err; ++ dev_err(dev, "Failed to create controls, error %d\n", err); ++ goto error; + } + + err = snd_card_register(card); + if (err) { +- dev_err(child, "Failed to register card, error %d\n", err); +- return err; ++ dev_err(dev, "Failed to register card, error %d\n", err); ++ goto error; + } + +- dev_set_drvdata(child, chip); +- dev_info(child, "card created with %d channels\n", numchans); ++ dev_set_drvdata(dev, chip); + ++ err = devm_add_action(dev, bcm2835_card_free, card); ++ if (err < 0) { ++ dev_err(dev, "Failed to add devm action, err %d\n", err); ++ goto error; ++ } ++ ++ dev_info(dev, "card created with %d channels\n", numchans); + return 0; ++ ++ error: ++ snd_card_free(card); ++ return err; + } + + static int snd_add_child_devices(struct device *device, u32 numchans) diff --git a/target/linux/brcm2708/patches-4.19/950-0420-BCM2708-Add-core-Device-Tree-support-ilitek251x.patch b/target/linux/brcm2708/patches-4.19/950-0420-BCM2708-Add-core-Device-Tree-support-ilitek251x.patch deleted file mode 100644 index b1c0b6ff4e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0420-BCM2708-Add-core-Device-Tree-support-ilitek251x.patch +++ /dev/null @@ -1,91 +0,0 @@ -From c0dfc87e355a7c6e434122e1a4fcc69729970610 Mon Sep 17 00:00:00 2001 -From: Samuel Hsu -Date: Mon, 8 Apr 2019 17:06:44 +0200 -Subject: [PATCH 420/806] BCM2708: Add core Device Tree support, ilitek251x - -Signed-off-by: Samuel Hsu ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 11 +++++ - .../boot/dts/overlays/ilitek251x-overlay.dts | 45 +++++++++++++++++++ - 3 files changed, 57 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/ilitek251x-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -67,6 +67,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - i2c0-bcm2708.dtbo \ - i2c1-bcm2708.dtbo \ - i2s-gpio28-31.dtbo \ -+ ilitek251x.dtbo \ - iqaudio-dac.dtbo \ - iqaudio-dacplus.dtbo \ - iqaudio-digi-wm8804-audio.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1146,6 +1146,17 @@ Load: dtoverlay=i2s-gpio28-31 - Params: - - -+Name: ilitek251x -+Info: Enables I2C connected Ilitek 251x multiple touch controller using -+ GPIO 4 (pin 7 on GPIO header) for interrupt. -+Load: dtoverlay=ilitek251x,= -+Params: interrupt GPIO used for interrupt (default 4) -+ sizex Touchscreen size x, horizontal resolution of -+ touchscreen (in pixels) -+ sizey Touchscreen size y, vertical resolution of -+ touchscreen (in pixels) -+ -+ - Name: iqaudio-dac - Info: Configures the IQaudio DAC audio card - Load: dtoverlay=iqaudio-dac, ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ilitek251x-overlay.dts -@@ -0,0 +1,45 @@ -+// Device tree overlay for I2C connected Ilitek multiple touch controller -+/dts-v1/; -+/plugin/; -+ -+ / { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ ili251x_pins: ili251x_pins { -+ brcm,pins = <4>; // interrupt -+ brcm,function = <0>; // in -+ brcm,pull = <2>; // pull-up // -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ili251x: ili251x@41 { -+ compatible = "ilitek,ili251x"; -+ reg = <0x41>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ili251x_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <4 8>; // high-to-low edge triggered -+ touchscreen-size-x = <16384>; -+ touchscreen-size-y = <9600>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ interrupt = <&ili251x_pins>,"brcm,pins:0", -+ <&ili251x>,"interrupts:0"; -+ sizex = <&ili251x>,"touchscreen-size-x:0"; -+ sizey = <&ili251x>,"touchscreen-size-y:0"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0420-staging-bcm2835-audio-unify-FOURCC-command-definitio.patch b/target/linux/brcm2708/patches-4.19/950-0420-staging-bcm2835-audio-unify-FOURCC-command-definitio.patch new file mode 100644 index 0000000000..fa24932b1b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0420-staging-bcm2835-audio-unify-FOURCC-command-definitio.patch @@ -0,0 +1,71 @@ +From 26693d4d1239b8239644ce6da50b8ce06ff18ae5 Mon Sep 17 00:00:00 2001 +From: Nicolas Saenz Julienne +Date: Wed, 17 Oct 2018 21:01:50 +0200 +Subject: [PATCH] staging: bcm2835-audio: unify FOURCC command + definitions + +commit a90d8f49cc7fd7220aa24b85fc74ef3cfd62b96f upstream. + +The device communicates with the audio core using FOURCC codes. The +driver was generating them using different macros/expressions. We now +use the same macro to create them and centralize all the definitions. + +Signed-off-by: Nicolas Saenz Julienne +Reviewed-by: Takashi Iwai +Acked-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-vchiq.c | 13 ++++--------- + .../bcm2835-audio/vc_vchi_audioserv_defs.h | 4 +++- + 2 files changed, 7 insertions(+), 10 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -89,11 +89,6 @@ static int bcm2835_audio_send_simple(str + return bcm2835_audio_send_msg(instance, &m, wait); + } + +-static const u32 BCM2835_AUDIO_WRITE_COOKIE1 = ('B' << 24 | 'C' << 16 | +- 'M' << 8 | 'A'); +-static const u32 BCM2835_AUDIO_WRITE_COOKIE2 = ('D' << 24 | 'A' << 16 | +- 'T' << 8 | 'A'); +- + static void audio_vchi_callback(void *param, + const VCHI_CALLBACK_REASON_T reason, + void *msg_handle) +@@ -112,8 +107,8 @@ static void audio_vchi_callback(void *pa + instance->result = m.u.result.success; + complete(&instance->msg_avail_comp); + } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { +- if (m.u.complete.cookie1 != BCM2835_AUDIO_WRITE_COOKIE1 || +- m.u.complete.cookie2 != BCM2835_AUDIO_WRITE_COOKIE2) ++ if (m.u.complete.cookie1 != VC_AUDIO_WRITE_COOKIE1 || ++ m.u.complete.cookie2 != VC_AUDIO_WRITE_COOKIE2) + dev_err(instance->dev, "invalid cookie\n"); + else + bcm2835_playback_fifo(instance->alsa_stream, +@@ -337,8 +332,8 @@ int bcm2835_audio_write(struct bcm2835_a + .type = VC_AUDIO_MSG_TYPE_WRITE, + .u.write.count = size, + .u.write.max_packet = instance->max_packet, +- .u.write.cookie1 = BCM2835_AUDIO_WRITE_COOKIE1, +- .u.write.cookie2 = BCM2835_AUDIO_WRITE_COOKIE2, ++ .u.write.cookie1 = VC_AUDIO_WRITE_COOKIE1, ++ .u.write.cookie2 = VC_AUDIO_WRITE_COOKIE2, + }; + unsigned int count; + int err, status; +--- a/drivers/staging/vc04_services/bcm2835-audio/vc_vchi_audioserv_defs.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/vc_vchi_audioserv_defs.h +@@ -7,8 +7,10 @@ + #define VC_AUDIOSERV_MIN_VER 1 + #define VC_AUDIOSERV_VER 2 + +-/* FourCC code used for VCHI connection */ ++/* FourCC codes used for VCHI communication */ + #define VC_AUDIO_SERVER_NAME MAKE_FOURCC("AUDS") ++#define VC_AUDIO_WRITE_COOKIE1 MAKE_FOURCC("BCMA") ++#define VC_AUDIO_WRITE_COOKIE2 MAKE_FOURCC("DATA") + + /* + * List of screens that are currently supported diff --git a/target/linux/brcm2708/patches-4.19/950-0421-dwc_otg-fix-locking-around-dequeueing-and-killing-UR.patch b/target/linux/brcm2708/patches-4.19/950-0421-dwc_otg-fix-locking-around-dequeueing-and-killing-UR.patch deleted file mode 100644 index dbf383f6c3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0421-dwc_otg-fix-locking-around-dequeueing-and-killing-UR.patch +++ /dev/null @@ -1,63 +0,0 @@ -From ea7ff2070d564858c445cfdbd883ea00927c0ada Mon Sep 17 00:00:00 2001 -From: P33M -Date: Tue, 9 Apr 2019 16:40:48 +0100 -Subject: [PATCH 421/806] dwc_otg: fix locking around dequeueing and killing - URBs - -kill_urbs_in_qh_list() is practically only ever called with the fiq lock -already held, so don't spinlock twice in the case where we need to cancel -an isochronous transfer. - -Also fix up a case where the global interrupt register could be read with -the fiq lock not held. - -Fixes the deadlock seen in https://github.com/raspberrypi/linux/issues/2907 ---- - drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c | 9 +++++++-- - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ---- - 2 files changed, 7 insertions(+), 6 deletions(-) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c -@@ -1344,16 +1344,21 @@ static inline uint32_t dwc_otg_read_comm - */ - gintmsk_common.b.portintr = 1; - } -- gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -- gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); - if(fiq_enable) { - local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); - /* Pull in the interrupts that the FIQ has masked */ - gintmsk.d32 |= ~(hcd->fiq_state->gintmsk_saved.d32); - gintmsk.d32 |= gintmsk_common.d32; - /* for the upstairs function to reenable - have to read it here in case FIQ triggers again */ - reenable_gintmsk->d32 = gintmsk.d32; -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); - local_fiq_enable(); -+ } else { -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); - } - - gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -195,15 +195,11 @@ static void kill_urbs_in_qh_list(dwc_otg - * but not yet been through the IRQ handler. - */ - if (fiq_fsm_enable && (hcd->fiq_state->channel[qh->channel->hc_num].fsm != FIQ_PASSTHROUGH)) { -- local_fiq_disable(); -- fiq_fsm_spin_lock(&hcd->fiq_state->lock); - qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; - qh->channel->halt_pending = 1; - if (hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_TURBO || - hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) - hcd->fiq_state->channel[n].fsm = FIQ_HS_ISOC_ABORTED; -- fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -- local_fiq_enable(); - } else { - dwc_otg_hc_halt(hcd->core_if, qh->channel, - DWC_OTG_HC_XFER_URB_DEQUEUE); diff --git a/target/linux/brcm2708/patches-4.19/950-0421-staging-bcm2835-audio-don-t-initialize-memory-twice.patch b/target/linux/brcm2708/patches-4.19/950-0421-staging-bcm2835-audio-don-t-initialize-memory-twice.patch new file mode 100644 index 0000000000..f5c7781c20 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0421-staging-bcm2835-audio-don-t-initialize-memory-twice.patch @@ -0,0 +1,30 @@ +From 7250c9d3d3f1b861d8f0c6220a81a465e45d70eb Mon Sep 17 00:00:00 2001 +From: Nicolas Saenz Julienne +Date: Wed, 17 Oct 2018 21:01:51 +0200 +Subject: [PATCH] staging: bcm2835-audio: don't initialize memory twice + +commit 2e5f59fb77397cab3bc3d156e8be4164a67d32ef upstream. + +The memory is being allocated with devres_alloc(), wich ultimately uses +__GFP_ZERO to call kmalloc. We don't need to zero the memory area again +in bcm2835-audio. + +Signed-off-by: Nicolas Saenz Julienne +Reviewed-by: Takashi Iwai +Acked-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -39,8 +39,6 @@ static int bcm2835_devm_add_vchi_ctx(str + if (!vchi_ctx) + return -ENOMEM; + +- memset(vchi_ctx, 0, sizeof(*vchi_ctx)); +- + ret = bcm2835_new_vchi_ctx(dev, vchi_ctx); + if (ret) { + devres_free(vchi_ctx); diff --git a/target/linux/brcm2708/patches-4.19/950-0422-rtc-rv3028-Add-backup-switchover-mode-support.patch b/target/linux/brcm2708/patches-4.19/950-0422-rtc-rv3028-Add-backup-switchover-mode-support.patch deleted file mode 100644 index 2b78e0bee4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0422-rtc-rv3028-Add-backup-switchover-mode-support.patch +++ /dev/null @@ -1,50 +0,0 @@ -From fb4e195012c405a04b1a7a86e240ceada0c8aa65 Mon Sep 17 00:00:00 2001 -From: Phil Howard -Date: Fri, 29 Mar 2019 10:53:14 +0000 -Subject: [PATCH 422/806] rtc: rv3028: Add backup switchover mode support - -Signed-off-by: Phil Howard ---- - drivers/rtc/rtc-rv3028.c | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/drivers/rtc/rtc-rv3028.c -+++ b/drivers/rtc/rtc-rv3028.c -@@ -74,6 +74,7 @@ - - #define RV3028_BACKUP_TCE BIT(5) - #define RV3028_BACKUP_TCR_MASK GENMASK(1,0) -+#define RV3028_BACKUP_BSM_MASK 0x0C - - #define OFFSET_STEP_PPT 953674 - -@@ -601,6 +602,7 @@ static int rv3028_probe(struct i2c_clien - struct rv3028_data *rv3028; - int ret, status; - u32 ohms; -+ u8 bsm; - struct nvmem_config nvmem_cfg = { - .name = "rv3028_nvram", - .word_size = 1, -@@ -671,6 +673,21 @@ static int rv3028_probe(struct i2c_clien - if (ret) - return ret; - -+ /* setup backup switchover mode */ -+ if (!device_property_read_u8(&client->dev, "backup-switchover-mode", -+ &bsm)) { -+ if (bsm <= 3) { -+ ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP, -+ RV3028_BACKUP_BSM_MASK, -+ (bsm & 0x03) << 2); -+ -+ if (ret) -+ return ret; -+ } else { -+ dev_warn(&client->dev, "invalid backup switchover mode value\n"); -+ } -+ } -+ - /* setup trickle charger */ - if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms", - &ohms)) { diff --git a/target/linux/brcm2708/patches-4.19/950-0422-staging-bcm2835-audio-reorder-variable-declarations-.patch b/target/linux/brcm2708/patches-4.19/950-0422-staging-bcm2835-audio-reorder-variable-declarations-.patch new file mode 100644 index 0000000000..6b9ac81b97 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0422-staging-bcm2835-audio-reorder-variable-declarations-.patch @@ -0,0 +1,118 @@ +From 604f0019cc1eaed6a316d7875fe697e53f5f105c Mon Sep 17 00:00:00 2001 +From: Nicolas Saenz Julienne +Date: Wed, 17 Oct 2018 21:01:52 +0200 +Subject: [PATCH] staging: bcm2835-audio: reorder variable declarations + & remove trivial comments + +commit d048385a070552ae819f99f05bd03ec41072783d upstream. + +When it comes to declaring variables it's preferred, when possible, to +use an inverted tree organization scheme. + +Also, removes some comments that were useless. + +Signed-off-by: Nicolas Saenz Julienne +Reviewed-by: Takashi Iwai +Acked-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 10 ++-------- + .../vc04_services/bcm2835-audio/bcm2835-vchiq.c | 4 ++-- + .../staging/vc04_services/bcm2835-audio/bcm2835.c | 14 +++++++------- + 3 files changed, 11 insertions(+), 17 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -164,14 +164,11 @@ static int snd_bcm2835_playback_spdif_op + return snd_bcm2835_playback_open_generic(substream, 1); + } + +-/* close callback */ + static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream) + { +- /* the hardware-specific codes will be here */ +- +- struct bcm2835_chip *chip; +- struct snd_pcm_runtime *runtime; + struct bcm2835_alsa_stream *alsa_stream; ++ struct snd_pcm_runtime *runtime; ++ struct bcm2835_chip *chip; + + chip = snd_pcm_substream_chip(substream); + mutex_lock(&chip->audio_mutex); +@@ -195,20 +192,17 @@ static int snd_bcm2835_playback_close(st + return 0; + } + +-/* hw_params callback */ + static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) + { + return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); + } + +-/* hw_free callback */ + static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream) + { + return snd_pcm_lib_free_pages(substream); + } + +-/* prepare callback */ + static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream) + { + struct bcm2835_chip *chip = snd_pcm_substream_chip(substream); +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -94,9 +94,9 @@ static void audio_vchi_callback(void *pa + void *msg_handle) + { + struct bcm2835_audio_instance *instance = param; +- int status; +- int msg_len; + struct vc_audio_msg m; ++ int msg_len; ++ int status; + + if (reason != VCHI_CALLBACK_MSG_AVAILABLE) + return; +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -161,8 +161,8 @@ static int snd_add_child_device(struct d + struct bcm2835_audio_driver *audio_driver, + u32 numchans) + { +- struct snd_card *card; + struct bcm2835_chip *chip; ++ struct snd_card *card; + int err; + + err = snd_card_new(dev, -1, NULL, THIS_MODULE, sizeof(*chip), &card); +@@ -225,12 +225,12 @@ static int snd_add_child_device(struct d + + static int snd_add_child_devices(struct device *device, u32 numchans) + { +- int i; +- int count_devices = 0; +- int minchannels = 0; +- int extrachannels = 0; + int extrachannels_per_driver = 0; + int extrachannels_remainder = 0; ++ int count_devices = 0; ++ int extrachannels = 0; ++ int minchannels = 0; ++ int i; + + for (i = 0; i < ARRAY_SIZE(children_devices); i++) + if (*children_devices[i].is_enabled) +@@ -258,9 +258,9 @@ static int snd_add_child_devices(struct + extrachannels_remainder); + + for (i = 0; i < ARRAY_SIZE(children_devices); i++) { +- int err; +- int numchannels_this_device; + struct bcm2835_audio_driver *audio_driver; ++ int numchannels_this_device; ++ int err; + + if (!*children_devices[i].is_enabled) + continue; diff --git a/target/linux/brcm2708/patches-4.19/950-0423-dt-bindings-rv3028-backup-switchover-support.patch b/target/linux/brcm2708/patches-4.19/950-0423-dt-bindings-rv3028-backup-switchover-support.patch deleted file mode 100644 index 1482dc06bd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0423-dt-bindings-rv3028-backup-switchover-support.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 48598900ebd06f5880b01fcc60e240ea4a04858c Mon Sep 17 00:00:00 2001 -From: Phil Howard -Date: Fri, 29 Mar 2019 10:57:07 +0000 -Subject: [PATCH 423/806] dt-bindings: rv3028 backup switchover support - -Signed-off-by: Phil Howard ---- - Documentation/devicetree/bindings/rtc/rtc.txt | 1 + - 1 file changed, 1 insertion(+) - ---- a/Documentation/devicetree/bindings/rtc/rtc.txt -+++ b/Documentation/devicetree/bindings/rtc/rtc.txt -@@ -26,6 +26,7 @@ below. - - trickle-diode-disable : Do not use internal trickle charger diode Should be - given if internal trickle charger diode should be - disabled -+- backup-switchover-mode : Configure RTC backup power supply switch behaviour - - wakeup-source : Enables wake up of host system on alarm - - quartz-load-femtofarads : The capacitive load of the quartz(x-tal), - expressed in femto Farad (fF). diff --git a/target/linux/brcm2708/patches-4.19/950-0423-staging-bcm2835-audio-use-anonymous-union-in-struct-.patch b/target/linux/brcm2708/patches-4.19/950-0423-staging-bcm2835-audio-use-anonymous-union-in-struct-.patch new file mode 100644 index 0000000000..e212a942ec --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0423-staging-bcm2835-audio-use-anonymous-union-in-struct-.patch @@ -0,0 +1,105 @@ +From 23b89436030e64196a1bc317901d08edd54fb772 Mon Sep 17 00:00:00 2001 +From: Nicolas Saenz Julienne +Date: Wed, 17 Oct 2018 21:01:53 +0200 +Subject: [PATCH] staging: bcm2835-audio: use anonymous union in struct + vc_audio_msg + +commit 9c2eaf7da855d314a369d48b9cbf8ac80717a1d0 upstream. + +In this case explicitly naming the union doesn't help overall code +comprehension and clutters it. + +Signed-off-by: Nicolas Saenz Julienne +Reviewed-by: Takashi Iwai +Acked-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../bcm2835-audio/bcm2835-vchiq.c | 30 +++++++++---------- + .../bcm2835-audio/vc_vchi_audioserv_defs.h | 2 +- + 2 files changed, 16 insertions(+), 16 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -104,15 +104,15 @@ static void audio_vchi_callback(void *pa + status = vchi_msg_dequeue(instance->vchi_handle, + &m, sizeof(m), &msg_len, VCHI_FLAGS_NONE); + if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { +- instance->result = m.u.result.success; ++ instance->result = m.result.success; + complete(&instance->msg_avail_comp); + } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { +- if (m.u.complete.cookie1 != VC_AUDIO_WRITE_COOKIE1 || +- m.u.complete.cookie2 != VC_AUDIO_WRITE_COOKIE2) ++ if (m.complete.cookie1 != VC_AUDIO_WRITE_COOKIE1 || ++ m.complete.cookie2 != VC_AUDIO_WRITE_COOKIE2) + dev_err(instance->dev, "invalid cookie\n"); + else + bcm2835_playback_fifo(instance->alsa_stream, +- m.u.complete.count); ++ m.complete.count); + } else { + dev_err(instance->dev, "unexpected callback type=%d\n", m.type); + } +@@ -257,11 +257,11 @@ int bcm2835_audio_set_ctls(struct bcm283 + struct vc_audio_msg m = {}; + + m.type = VC_AUDIO_MSG_TYPE_CONTROL; +- m.u.control.dest = chip->dest; ++ m.control.dest = chip->dest; + if (!chip->mute) +- m.u.control.volume = CHIP_MIN_VOLUME; ++ m.control.volume = CHIP_MIN_VOLUME; + else +- m.u.control.volume = alsa2chip(chip->volume); ++ m.control.volume = alsa2chip(chip->volume); + + return bcm2835_audio_send_msg(alsa_stream->instance, &m, true); + } +@@ -272,9 +272,9 @@ int bcm2835_audio_set_params(struct bcm2 + { + struct vc_audio_msg m = { + .type = VC_AUDIO_MSG_TYPE_CONFIG, +- .u.config.channels = channels, +- .u.config.samplerate = samplerate, +- .u.config.bps = bps, ++ .config.channels = channels, ++ .config.samplerate = samplerate, ++ .config.bps = bps, + }; + int err; + +@@ -302,7 +302,7 @@ int bcm2835_audio_drain(struct bcm2835_a + { + struct vc_audio_msg m = { + .type = VC_AUDIO_MSG_TYPE_STOP, +- .u.stop.draining = 1, ++ .stop.draining = 1, + }; + + return bcm2835_audio_send_msg(alsa_stream->instance, &m, false); +@@ -330,10 +330,10 @@ int bcm2835_audio_write(struct bcm2835_a + struct bcm2835_audio_instance *instance = alsa_stream->instance; + struct vc_audio_msg m = { + .type = VC_AUDIO_MSG_TYPE_WRITE, +- .u.write.count = size, +- .u.write.max_packet = instance->max_packet, +- .u.write.cookie1 = VC_AUDIO_WRITE_COOKIE1, +- .u.write.cookie2 = VC_AUDIO_WRITE_COOKIE2, ++ .write.count = size, ++ .write.max_packet = instance->max_packet, ++ .write.cookie1 = VC_AUDIO_WRITE_COOKIE1, ++ .write.cookie2 = VC_AUDIO_WRITE_COOKIE2, + }; + unsigned int count; + int err, status; +--- a/drivers/staging/vc04_services/bcm2835-audio/vc_vchi_audioserv_defs.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/vc_vchi_audioserv_defs.h +@@ -93,7 +93,7 @@ struct vc_audio_msg { + struct vc_audio_write write; + struct vc_audio_result result; + struct vc_audio_complete complete; +- } u; ++ }; + }; + + #endif /* _VC_AUDIO_DEFS_H_ */ diff --git a/target/linux/brcm2708/patches-4.19/950-0424-overlays-Add-rv3028-backup-switchover-support-to-i2c.patch b/target/linux/brcm2708/patches-4.19/950-0424-overlays-Add-rv3028-backup-switchover-support-to-i2c.patch deleted file mode 100644 index 034d3fb493..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0424-overlays-Add-rv3028-backup-switchover-support-to-i2c.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a2fdc7a590566d99d5261badeecb644664ff0fb3 Mon Sep 17 00:00:00 2001 -From: Phil Howard -Date: Fri, 29 Mar 2019 10:59:55 +0000 -Subject: [PATCH 424/806] overlays: Add rv3028 backup switchover support to - i2c-rtc - -Signed-off-by: Phil Howard ---- - arch/arm/boot/dts/overlays/README | 3 +++ - arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 1 + - 2 files changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1013,6 +1013,9 @@ Params: abx80x Select o - wakeup-source Specify that the RTC can be used as a wakeup - source - -+ backup-switchover-mode Backup power supply switch mode. Must be 0 for -+ off or 1 for Vdd < VBackup (RV3028 only) -+ - - Name: i2c-rtc-gpio - Info: Adds support for a number of I2C Real Time Clock devices ---- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -@@ -200,6 +200,7 @@ - trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", - <&abx80x>,"abracon,tc-resistor", - <&rv3028>,"trickle-resistor-ohms:0"; -+ backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; - wakeup-source = <&ds1339>,"wakeup-source?", - <&ds3231>,"wakeup-source?", - <&mcp7940x>,"wakeup-source?", diff --git a/target/linux/brcm2708/patches-4.19/950-0424-staging-bcm2835-audio-more-generic-probe-function-na.patch b/target/linux/brcm2708/patches-4.19/950-0424-staging-bcm2835-audio-more-generic-probe-function-na.patch new file mode 100644 index 0000000000..6b03e1e43a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0424-staging-bcm2835-audio-more-generic-probe-function-na.patch @@ -0,0 +1,39 @@ +From 0b7d959b0d0c18959c66696844a1c9956370ab99 Mon Sep 17 00:00:00 2001 +From: Nicolas Saenz Julienne +Date: Wed, 17 Oct 2018 21:01:54 +0200 +Subject: [PATCH] staging: bcm2835-audio: more generic probe function + name + +commit 96f3bd8ae6516898c7b411ecb87064bb0dd25415 upstream. + +There will only be one probe function, there is no use for appendig +"_dt" the end of the name. + +Signed-off-by: Nicolas Saenz Julienne +Reviewed-by: Takashi Iwai +Acked-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -291,7 +291,7 @@ static int snd_add_child_devices(struct + return 0; + } + +-static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) ++static int snd_bcm2835_alsa_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; + u32 numchans; +@@ -344,7 +344,7 @@ static const struct of_device_id snd_bcm + MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); + + static struct platform_driver bcm2835_alsa0_driver = { +- .probe = snd_bcm2835_alsa_probe_dt, ++ .probe = snd_bcm2835_alsa_probe, + #ifdef CONFIG_PM + .suspend = snd_bcm2835_alsa_suspend, + .resume = snd_bcm2835_alsa_resume, diff --git a/target/linux/brcm2708/patches-4.19/950-0425-Maxim-MAX98357A-I2S-DAC-overlay-2935.patch b/target/linux/brcm2708/patches-4.19/950-0425-Maxim-MAX98357A-I2S-DAC-overlay-2935.patch deleted file mode 100644 index 7fa37cb7b2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0425-Maxim-MAX98357A-I2S-DAC-overlay-2935.patch +++ /dev/null @@ -1,130 +0,0 @@ -From 5962d99b5efed4297ed5c1807d21b406ab86aef1 Mon Sep 17 00:00:00 2001 -From: wavelet2 <20504977+wavelet2@users.noreply.github.com> -Date: Mon, 15 Apr 2019 10:00:20 +0100 -Subject: [PATCH 425/806] Maxim MAX98357A I2S DAC overlay (#2935) - -Add overlay for Maxim MAX98357A I2S DAC. - -Signed-off-by: Richard Steedman ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 9 ++ - .../boot/dts/overlays/max98357a-overlay.dts | 84 +++++++++++++++++++ - 3 files changed, 94 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/max98357a-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -75,6 +75,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - justboom-dac.dtbo \ - justboom-digi.dtbo \ - ltc294x.dtbo \ -+ max98357a.dtbo \ - mbed-dac.dtbo \ - mcp23017.dtbo \ - mcp23s17.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1276,6 +1276,15 @@ Params: ltc2941 Select t - See the datasheet for more information. - - -+Name: max98357a -+Info: Configures the Maxim MAX98357A I2S DAC -+Load: dtoverlay=max98357a,= -+Params: no-sdmode Driver does not manage the state of the DAC's -+ SD_MODE pin (i.e. chip is always on). -+ sdmode-pin integer, GPIO pin connected to the SD_MODE input -+ of the DAC (default GPIO4 if parameter omitted). -+ -+ - Name: mbed-dac - Info: Configures the mbed AudioCODEC (TLV320AIC23B) - Load: dtoverlay=mbed-dac ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/max98357a-overlay.dts -@@ -0,0 +1,84 @@ -+// Overlay for Maxim MAX98357A audio DAC -+ -+// dtparams: -+// no-sdmode - SD_MODE pin not managed by driver. -+// sdmode-pin - Specify GPIO pin to which SD_MODE is connected (default 4). -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ /* Enable I2S */ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ /* DAC whose SD_MODE pin is managed by driver (via GPIO pin) */ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ max98357a_dac: max98357a { -+ compatible = "maxim,max98357a"; -+ #sound-dai-cells = <0>; -+ sdmode-gpios = <&gpio 4 0>; /* 2nd word overwritten by sdmode-pin parameter */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ /* DAC whose SD_MODE pin is not managed by driver */ -+ fragment@2 { -+ target-path = "/"; -+ __dormant__ { -+ max98357a_nsd: max98357a { -+ compatible = "maxim,max98357a"; -+ #sound-dai-cells = <0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ /* Soundcard connecting I2S to DAC with SD_MODE */ -+ fragment@3 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "MAX98357A"; -+ status = "okay"; -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ simple-audio-card,codec { -+ sound-dai = <&max98357a_dac>; -+ }; -+ }; -+ }; -+ -+ /* Soundcard connecting I2S to DAC without SD_MODE */ -+ fragment@4 { -+ target = <&sound>; -+ __dormant__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "MAX98357A"; -+ status = "okay"; -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ simple-audio-card,codec { -+ sound-dai = <&max98357a_nsd>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ no-sdmode = <0>,"-1+2-3+4"; -+ sdmode-pin = <&max98357a_dac>,"sdmode-gpios:4"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0425-staging-bcm2835-audio-rename-platform_driver-structu.patch b/target/linux/brcm2708/patches-4.19/950-0425-staging-bcm2835-audio-rename-platform_driver-structu.patch new file mode 100644 index 0000000000..05128020f7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0425-staging-bcm2835-audio-rename-platform_driver-structu.patch @@ -0,0 +1,47 @@ +From b06f01038711efc5182267cfc68e358a89ee2502 Mon Sep 17 00:00:00 2001 +From: Nicolas Saenz Julienne +Date: Wed, 17 Oct 2018 21:01:55 +0200 +Subject: [PATCH] staging: bcm2835-audio: rename platform_driver + structure + +commit 82cdc0c6b6faf877e2aecb957cffa9cb578cc572 upstream. + +It was called bcm2835_alsa0_driver, that "0" didn't mean much. + +Suggested-by: Takashi Iwai +Signed-off-by: Nicolas Saenz Julienne +Acked-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -343,7 +343,7 @@ static const struct of_device_id snd_bcm + }; + MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); + +-static struct platform_driver bcm2835_alsa0_driver = { ++static struct platform_driver bcm2835_alsa_driver = { + .probe = snd_bcm2835_alsa_probe, + #ifdef CONFIG_PM + .suspend = snd_bcm2835_alsa_suspend, +@@ -359,7 +359,7 @@ static int bcm2835_alsa_device_init(void + { + int retval; + +- retval = platform_driver_register(&bcm2835_alsa0_driver); ++ retval = platform_driver_register(&bcm2835_alsa_driver); + if (retval) + pr_err("Error registering bcm2835_audio driver %d .\n", retval); + +@@ -368,7 +368,7 @@ static int bcm2835_alsa_device_init(void + + static void bcm2835_alsa_device_exit(void) + { +- platform_driver_unregister(&bcm2835_alsa0_driver); ++ platform_driver_unregister(&bcm2835_alsa_driver); + } + + late_initcall(bcm2835_alsa_device_init); diff --git a/target/linux/brcm2708/patches-4.19/950-0426-sound-Fixes-for-audioinjector-octo-under-4.19.patch b/target/linux/brcm2708/patches-4.19/950-0426-sound-Fixes-for-audioinjector-octo-under-4.19.patch deleted file mode 100644 index 63c71221a1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0426-sound-Fixes-for-audioinjector-octo-under-4.19.patch +++ /dev/null @@ -1,108 +0,0 @@ -From d003eff5bc4d19902867ad585292780a94746705 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 21 Mar 2019 11:19:46 +0000 -Subject: [PATCH 426/806] sound: Fixes for audioinjector-octo under 4.19 - -1. Move the DT alias declaration to the I2C shim in the cases -where the shim is enabled. This works around a problem caused by a -4.19 commit [1] that generates DT/OF uevents for I2C drivers. - -2. Fix the diagnostics in an error path of the soundcard driver to -correctly identify the reason for the failure to load. - -3. Move the declaration of the clock node in the overlay outside -the I2C node to avoid warnings. - -4. Sort the overlay nodes so that dependencies are only to earlier -fragments, in an attempt to get runtime dtoverlay application to -work (it still doesn't...) - -See: https://github.com/Audio-Injector/Octo/issues/14 -Signed-off-by: Phil Elwell - -[1] af503716ac14 ("i2c: core: report OF style module alias for devices registered via OF") ---- - .../overlays/audioinjector-addons-overlay.dts | 19 ++++++++++++------- - sound/soc/bcm/audioinjector-octo-soundcard.c | 2 +- - sound/soc/codecs/cs42xx8-i2c.c | 7 +++++++ - sound/soc/codecs/cs42xx8.c | 2 ++ - 4 files changed, 22 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts -+++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts -@@ -13,6 +13,17 @@ - }; - - fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ cs42448_mclk: codec-mclk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <49152000>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; -@@ -27,16 +38,10 @@ - clock-names = "mclk"; - status = "okay"; - }; -- -- cs42448_mclk: codec-mclk { -- compatible = "fixed-clock"; -- #clock-cells = <0>; -- clock-frequency = <49152000>; -- }; - }; - }; - -- fragment@2 { -+ fragment@3 { - target = <&sound>; - snd: __overlay__ { - compatible = "ai,audioinjector-octo-soundcard"; ---- a/sound/soc/bcm/audioinjector-octo-soundcard.c -+++ b/sound/soc/bcm/audioinjector-octo-soundcard.c -@@ -297,7 +297,7 @@ static int audioinjector_octo_probe(stru - dai->codec_name = NULL; - dai->codec_of_node = codec_node; - } else -- if (!dai->cpu_of_node) { -+ if (!i2s_node) { - dev_err(&pdev->dev, - "i2s-controller missing or invalid in DT\n"); - return -EINVAL; ---- a/sound/soc/codecs/cs42xx8-i2c.c -+++ b/sound/soc/codecs/cs42xx8-i2c.c -@@ -45,6 +45,13 @@ static struct i2c_device_id cs42xx8_i2c_ - }; - MODULE_DEVICE_TABLE(i2c, cs42xx8_i2c_id); - -+const struct of_device_id cs42xx8_of_match[] = { -+ { .compatible = "cirrus,cs42448", .data = &cs42448_data, }, -+ { .compatible = "cirrus,cs42888", .data = &cs42888_data, }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, cs42xx8_of_match); -+ - static struct i2c_driver cs42xx8_i2c_driver = { - .driver = { - .name = "cs42xx8", ---- a/sound/soc/codecs/cs42xx8.c -+++ b/sound/soc/codecs/cs42xx8.c -@@ -436,8 +436,10 @@ const struct of_device_id cs42xx8_of_mat - { .compatible = "cirrus,cs42888", .data = &cs42888_data, }, - { /* sentinel */ } - }; -+#if !IS_ENABLED(CONFIG_SND_SOC_CS42XX8_I2C) - MODULE_DEVICE_TABLE(of, cs42xx8_of_match); - EXPORT_SYMBOL_GPL(cs42xx8_of_match); -+#endif - - int cs42xx8_probe(struct device *dev, struct regmap *regmap) - { diff --git a/target/linux/brcm2708/patches-4.19/950-0426-staging-bcm2835-audio-update-TODO.patch b/target/linux/brcm2708/patches-4.19/950-0426-staging-bcm2835-audio-update-TODO.patch new file mode 100644 index 0000000000..8f24d154cb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0426-staging-bcm2835-audio-update-TODO.patch @@ -0,0 +1,56 @@ +From 56b704581afbd8d9ccd73cfa7935b6178749a3e9 Mon Sep 17 00:00:00 2001 +From: Nicolas Saenz Julienne +Date: Wed, 17 Oct 2018 21:01:56 +0200 +Subject: [PATCH] staging: bcm2835-audio: update TODO + +commit 01ec7398c56e8f1b903ecb3c5c75400e263eef43 upstream. + +The following tasks were completed or not the right solution: + +1/2- Not the proper solution, we should register a platform device in +vchiq the same way it's done with bcm2835-camera as commented here: +https://lkml.org/lkml/2018/10/16/1131 + +2/3- Fixed by Takashi Iwai here: https://lkml.org/lkml/2018/9/4/587 + +Also, adds a new task as per mailing list conversation. + +Signed-off-by: Nicolas Saenz Julienne +Acked-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../staging/vc04_services/bcm2835-audio/TODO | 25 +++---------------- + 1 file changed, 3 insertions(+), 22 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/TODO ++++ b/drivers/staging/vc04_services/bcm2835-audio/TODO +@@ -4,26 +4,7 @@ + * * + ***************************************************************************** + ++1) Revisit multi-cards options and PCM route mixer control (as per comment ++https://lkml.org/lkml/2018/9/8/200) + +-1) Document the device tree node +- +-The downstream tree(the tree that the driver was imported from) at +-http://www.github.com/raspberrypi/linux uses this node: +- +-audio: audio { +- compatible = "brcm,bcm2835-audio"; +- brcm,pwm-channels = <8>; +-}; +- +-Since the driver requires the use of VCHIQ, it may be useful to have a link +-in the device tree to the VCHIQ driver. +- +-2) Gracefully handle the case where VCHIQ is missing from the device tree or +-it has not been initialized yet. +- +-3) Review error handling and remove duplicate code. +- +-4) Cleanup the logging mechanism. The driver should probably be using the +-standard kernel logging mechanisms such as dev_info, dev_dbg, and friends. +- +-5) Fix the remaining checkpatch.pl errors and warnings. ++2) Fix the remaining checkpatch.pl errors and warnings. diff --git a/target/linux/brcm2708/patches-4.19/950-0427-Revert-cgroup-Disable-cgroup-memory-by-default.patch b/target/linux/brcm2708/patches-4.19/950-0427-Revert-cgroup-Disable-cgroup-memory-by-default.patch deleted file mode 100644 index 3a0539fc51..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0427-Revert-cgroup-Disable-cgroup-memory-by-default.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 49b6bb41655247c123cdc46dd49276a107c8b1d2 Mon Sep 17 00:00:00 2001 -From: P33M -Date: Wed, 24 Apr 2019 14:25:09 +0100 -Subject: [PATCH 427/806] Revert "cgroup: Disable cgroup "memory" by default" - -This reverts commit cd6ce4d0ded13c94ff5208c679ed5e030263149b. ---- - kernel/cgroup/cgroup.c | 30 ------------------------------ - 1 file changed, 30 deletions(-) - ---- a/kernel/cgroup/cgroup.c -+++ b/kernel/cgroup/cgroup.c -@@ -5334,8 +5334,6 @@ int __init cgroup_init_early(void) - } - - static u16 cgroup_disable_mask __initdata; --static u16 cgroup_enable_mask __initdata; --static int __init cgroup_disable(char *str); - - /** - * cgroup_init - cgroup initialization -@@ -5376,12 +5374,6 @@ int __init cgroup_init(void) - - mutex_unlock(&cgroup_mutex); - -- /* Apply an implicit disable... */ -- cgroup_disable("memory"); -- -- /* ...knowing that an explicit enable will override it. */ -- cgroup_disable_mask &= ~cgroup_enable_mask; -- - for_each_subsys(ss, ssid) { - if (ss->early_init) { - struct cgroup_subsys_state *css = -@@ -5773,28 +5765,6 @@ static int __init cgroup_disable(char *s - } - __setup("cgroup_disable=", cgroup_disable); - --static int __init cgroup_enable(char *str) --{ -- struct cgroup_subsys *ss; -- char *token; -- int i; -- -- while ((token = strsep(&str, ",")) != NULL) { -- if (!*token) -- continue; -- -- for_each_subsys(ss, i) { -- if (strcmp(token, ss->name) && -- strcmp(token, ss->legacy_name)) -- continue; -- -- cgroup_enable_mask |= 1 << i; -- } -- } -- return 1; --} --__setup("cgroup_enable=", cgroup_enable); -- - /** - * css_tryget_online_from_dir - get corresponding css from a cgroup dentry - * @dentry: directory dentry of interest diff --git a/target/linux/brcm2708/patches-4.19/950-0427-staging-bcm2835-audio-interpolate-audio-delay.patch b/target/linux/brcm2708/patches-4.19/950-0427-staging-bcm2835-audio-interpolate-audio-delay.patch new file mode 100644 index 0000000000..cf5f11c091 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0427-staging-bcm2835-audio-interpolate-audio-delay.patch @@ -0,0 +1,82 @@ +From 2ba82d9516203ce41f33e98adb667bedee3622bc Mon Sep 17 00:00:00 2001 +From: Mike Brady +Date: Mon, 22 Oct 2018 20:17:08 +0100 +Subject: [PATCH] staging: bcm2835-audio: interpolate audio delay + +commit a105a3a72824e0ac685a0711a67e4dbe29de62d0 upstream. + +When the BCM2835 audio output is used, userspace sees a jitter up to 10ms +in the audio position, aka "delay" -- the number of frames that must +be output before a new frame would be played. +Make this a bit nicer for userspace by interpolating the position +using the CPU clock. +The overhead is small -- an extra ktime_get() every time a GPU message +is sent -- and another call and a few calculations whenever the delay +is sought from userland. +At 48,000 frames per second, i.e. approximately 20 microseconds per +frame, it would take a clock inaccuracy of +20 microseconds in 10 milliseconds -- 2,000 parts per million -- +to result in an inaccurate estimate, whereas +crystal- or resonator-based clocks typically have an +inaccuracy of 10s to 100s of parts per million. + +Signed-off-by: Mike Brady +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 20 +++++++++++++++++++ + .../vc04_services/bcm2835-audio/bcm2835.h | 1 + + 2 files changed, 21 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -74,6 +74,7 @@ void bcm2835_playback_fifo(struct bcm283 + atomic_set(&alsa_stream->pos, pos); + + alsa_stream->period_offset += bytes; ++ alsa_stream->interpolate_start = ktime_get(); + if (alsa_stream->period_offset >= alsa_stream->period_size) { + alsa_stream->period_offset %= alsa_stream->period_size; + snd_pcm_period_elapsed(substream); +@@ -237,6 +238,7 @@ static int snd_bcm2835_pcm_prepare(struc + atomic_set(&alsa_stream->pos, 0); + alsa_stream->period_offset = 0; + alsa_stream->draining = false; ++ alsa_stream->interpolate_start = ktime_get(); + + return 0; + } +@@ -286,6 +288,24 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s + { + struct snd_pcm_runtime *runtime = substream->runtime; + struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; ++ ktime_t now = ktime_get(); ++ ++ /* Give userspace better delay reporting by interpolating between GPU ++ * notifications, assuming audio speed is close enough to the clock ++ * used for ktime ++ */ ++ ++ if ((ktime_to_ns(alsa_stream->interpolate_start)) && ++ (ktime_compare(alsa_stream->interpolate_start, now) < 0)) { ++ u64 interval = ++ (ktime_to_ns(ktime_sub(now, ++ alsa_stream->interpolate_start))); ++ u64 frames_output_in_interval = ++ div_u64((interval * runtime->rate), 1000000000); ++ snd_pcm_sframes_t frames_output_in_interval_sized = ++ -frames_output_in_interval; ++ runtime->delay = frames_output_in_interval_sized; ++ } + + return snd_pcm_indirect_playback_pointer(substream, + &alsa_stream->pcm_indirect, +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -78,6 +78,7 @@ struct bcm2835_alsa_stream { + unsigned int period_offset; + unsigned int buffer_size; + unsigned int period_size; ++ ktime_t interpolate_start; + + struct bcm2835_audio_instance *instance; + int idx; diff --git a/target/linux/brcm2708/patches-4.19/950-0428-staging-bcm2835-audio-Enable-compile-test.patch b/target/linux/brcm2708/patches-4.19/950-0428-staging-bcm2835-audio-Enable-compile-test.patch new file mode 100644 index 0000000000..3605c41fa8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0428-staging-bcm2835-audio-Enable-compile-test.patch @@ -0,0 +1,27 @@ +From b338fbb56955b74b5f41a623aceab4d74ba7c173 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Thu, 6 Dec 2018 19:28:56 +0100 +Subject: [PATCH] staging: bcm2835-audio: Enable compile test + +commit 458d4866a34d0c129ffc3bd56345b2166ba46d77 upstream. + +Enable the compilation test for bcm2835-audio to gain more build coverage. + +Signed-off-by: Stefan Wahren +Reviewed-by: Nicolas Saenz Julienne +Reviewed-by: Dan Carpenter +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/Kconfig ++++ b/drivers/staging/vc04_services/bcm2835-audio/Kconfig +@@ -1,6 +1,6 @@ + config SND_BCM2835 + tristate "BCM2835 Audio" +- depends on ARCH_BCM2835 && SND ++ depends on (ARCH_BCM2835 || COMPILE_TEST) && SND + select SND_PCM + select BCM2835_VCHIQ + help diff --git a/target/linux/brcm2708/patches-4.19/950-0429-overlays-Add-PiGlow-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0429-overlays-Add-PiGlow-overlay.patch deleted file mode 100644 index ee04fc7d80..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0429-overlays-Add-PiGlow-overlay.patch +++ /dev/null @@ -1,147 +0,0 @@ -From 615467f56356a2054d3a86854d391b7a2e0d5811 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Mon, 29 Apr 2019 19:35:33 +0200 -Subject: [PATCH 429/806] overlays: Add PiGlow overlay - -The PiGlow is a small add-on board for the Raspberry Pi that provides -18 individually controllable LEDs (SN3218) and uses the following pins: - -P1 & P17 (3V3) -P2 (5V) -P3 (SDA) -P5 (SCL) -P14 (GND) - -Signed-off-by: Stefan Wahren ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 ++ - arch/arm/boot/dts/overlays/piglow-overlay.dts | 97 +++++++++++++++++++ - 3 files changed, 104 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/piglow-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -97,6 +97,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - pi3-disable-wifi.dtbo \ - pi3-miniuart-bt.dtbo \ - pibell.dtbo \ -+ piglow.dtbo \ - piscreen.dtbo \ - piscreen2r.dtbo \ - pisound.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1532,6 +1532,12 @@ Params: alsaname Set the - "PiBell") - - -+Name: piglow -+Info: Configures the PiGlow by pimoroni.com -+Load: dtoverlay=piglow -+Params: -+ -+ - Name: piscreen - Info: PiScreen display by OzzMaker.com - Load: dtoverlay=piscreen,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/piglow-overlay.dts -@@ -0,0 +1,97 @@ -+// Definitions for SN3218 LED driver from Si-En Technology on PiGlow -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ sn3218@54 { -+ compatible = "si-en,sn3218"; -+ reg = <0x54>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ led@1 { -+ reg = <1>; -+ label = "piglow:red:led1"; -+ }; -+ led@2 { -+ reg = <2>; -+ label = "piglow:orange:led2"; -+ }; -+ led@3 { -+ reg = <3>; -+ label = "piglow:yellow:led3"; -+ }; -+ led@4 { -+ reg = <4>; -+ label = "piglow:green:led4"; -+ }; -+ led@5 { -+ reg = <5>; -+ label = "piglow:blue:led5"; -+ }; -+ led@6 { -+ reg = <6>; -+ label = "piglow:green:led6"; -+ }; -+ led@7 { -+ reg = <7>; -+ label = "piglow:red:led7"; -+ }; -+ led@8 { -+ reg = <8>; -+ label = "piglow:orange:led8"; -+ }; -+ led@9 { -+ reg = <9>; -+ label = "piglow:yellow:led9"; -+ }; -+ led@10 { -+ reg = <10>; -+ label = "piglow:white:led10"; -+ }; -+ led@11 { -+ reg = <11>; -+ label = "piglow:white:led11"; -+ }; -+ led@12 { -+ reg = <12>; -+ label = "piglow:blue:led12"; -+ }; -+ led@13 { -+ reg = <13>; -+ label = "piglow:white:led13"; -+ }; -+ led@14 { -+ reg = <14>; -+ label = "piglow:green:led14"; -+ }; -+ led@15 { -+ reg = <15>; -+ label = "piglow:blue:led15"; -+ }; -+ led@16 { -+ reg = <16>; -+ label = "piglow:yellow:led16"; -+ }; -+ led@17 { -+ reg = <17>; -+ label = "piglow:orange:led17"; -+ }; -+ led@18 { -+ reg = <18>; -+ label = "piglow:red:led18"; -+ }; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0429-staging-bcm2835-audio-use-module_platform_driver-mac.patch b/target/linux/brcm2708/patches-4.19/950-0429-staging-bcm2835-audio-use-module_platform_driver-mac.patch new file mode 100644 index 0000000000..a0a5f765e8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0429-staging-bcm2835-audio-use-module_platform_driver-mac.patch @@ -0,0 +1,48 @@ +From 72c059360457babd76009697e652c96cb282856e Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Thu, 6 Dec 2018 19:28:57 +0100 +Subject: [PATCH] staging: bcm2835-audio: use module_platform_driver() + macro + +commit 1e55d56344b0777d6cee9b9e4a813d53728ee798 upstream. + +There is not much value behind this boilerplate, so use +module_platform_driver() instead. + +Signed-off-by: Stefan Wahren +Reviewed-by: Nicolas Saenz Julienne +Reviewed-by: Dan Carpenter +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835.c | 20 +------------------ + 1 file changed, 1 insertion(+), 19 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -354,25 +354,7 @@ static struct platform_driver bcm2835_al + .of_match_table = snd_bcm2835_of_match_table, + }, + }; +- +-static int bcm2835_alsa_device_init(void) +-{ +- int retval; +- +- retval = platform_driver_register(&bcm2835_alsa_driver); +- if (retval) +- pr_err("Error registering bcm2835_audio driver %d .\n", retval); +- +- return retval; +-} +- +-static void bcm2835_alsa_device_exit(void) +-{ +- platform_driver_unregister(&bcm2835_alsa_driver); +-} +- +-late_initcall(bcm2835_alsa_device_init); +-module_exit(bcm2835_alsa_device_exit); ++module_platform_driver(bcm2835_alsa_driver); + + MODULE_AUTHOR("Dom Cobley"); + MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); diff --git a/target/linux/brcm2708/patches-4.19/950-0430-staging-bcm2835-audio-Drop-DT-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0430-staging-bcm2835-audio-Drop-DT-dependency.patch new file mode 100644 index 0000000000..f9369565bd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0430-staging-bcm2835-audio-Drop-DT-dependency.patch @@ -0,0 +1,105 @@ +From 1ddeeda8208bc269c90aad4bd8bb878f7436f62d Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Thu, 6 Dec 2018 19:28:58 +0100 +Subject: [PATCH] staging: bcm2835-audio: Drop DT dependency + +commit 438fc48260a0afc4cee733e5bc20234ff2bbef56 upstream. + +Just like the bcm2835-video make this a platform driver which is probed +by vchiq. In order to change the number of channels use a module +parameter instead, but use the maximum as default. + +Signed-off-by: Stefan Wahren +Reviewed-by: Nicolas Saenz Julienne +Reviewed-by: Dan Carpenter +Signed-off-by: Greg Kroah-Hartman +--- + .../vc04_services/bcm2835-audio/bcm2835.c | 31 ++++++------------- + 1 file changed, 9 insertions(+), 22 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -6,13 +6,13 @@ + #include + #include + #include +-#include + + #include "bcm2835.h" + + static bool enable_hdmi; + static bool enable_headphones; + static bool enable_compat_alsa = true; ++static int num_channels = MAX_SUBSTREAMS; + + module_param(enable_hdmi, bool, 0444); + MODULE_PARM_DESC(enable_hdmi, "Enables HDMI virtual audio device"); +@@ -21,6 +21,8 @@ MODULE_PARM_DESC(enable_headphones, "Ena + module_param(enable_compat_alsa, bool, 0444); + MODULE_PARM_DESC(enable_compat_alsa, + "Enables ALSA compatibility virtual audio device"); ++module_param(num_channels, int, 0644); ++MODULE_PARM_DESC(num_channels, "Number of audio channels (default: 8)"); + + static void bcm2835_devm_free_vchi_ctx(struct device *dev, void *res) + { +@@ -294,28 +296,19 @@ static int snd_add_child_devices(struct + static int snd_bcm2835_alsa_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; +- u32 numchans; + int err; + +- err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", +- &numchans); +- if (err) { +- dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); +- return err; +- } +- +- if (numchans == 0 || numchans > MAX_SUBSTREAMS) { +- numchans = MAX_SUBSTREAMS; +- dev_warn(dev, +- "Illegal 'brcm,pwm-channels' value, will use %u\n", +- numchans); ++ if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) { ++ num_channels = MAX_SUBSTREAMS; ++ dev_warn(dev, "Illegal num_channels value, will use %u\n", ++ num_channels); + } + + err = bcm2835_devm_add_vchi_ctx(dev); + if (err) + return err; + +- err = snd_add_child_devices(dev, numchans); ++ err = snd_add_child_devices(dev, num_channels); + if (err) + return err; + +@@ -337,12 +330,6 @@ static int snd_bcm2835_alsa_resume(struc + + #endif + +-static const struct of_device_id snd_bcm2835_of_match_table[] = { +- { .compatible = "brcm,bcm2835-audio",}, +- {}, +-}; +-MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); +- + static struct platform_driver bcm2835_alsa_driver = { + .probe = snd_bcm2835_alsa_probe, + #ifdef CONFIG_PM +@@ -351,7 +338,6 @@ static struct platform_driver bcm2835_al + #endif + .driver = { + .name = "bcm2835_audio", +- .of_match_table = snd_bcm2835_of_match_table, + }, + }; + module_platform_driver(bcm2835_alsa_driver); +@@ -359,3 +345,4 @@ module_platform_driver(bcm2835_alsa_driv + MODULE_AUTHOR("Dom Cobley"); + MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); + MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:bcm2835_audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0431-Revert-bcm2835-interpolate-audio-delay.patch b/target/linux/brcm2708/patches-4.19/950-0431-Revert-bcm2835-interpolate-audio-delay.patch deleted file mode 100644 index ec87a5b397..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0431-Revert-bcm2835-interpolate-audio-delay.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 83251570f16ec848694dac016cbdb55b1d28496d Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 29 Apr 2019 19:16:14 +0100 -Subject: [PATCH 431/806] Revert "bcm2835: interpolate audio delay" - -commit fb4b9f02986fcb5ae751106ef9b027806b5dd750 upstream. - -This reverts commit fb8cc99f05687ca5565dc53a7ee0dd86aefad952. ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 12 +----------- - .../staging/vc04_services/bcm2835-audio/bcm2835.h | 1 - - 2 files changed, 1 insertion(+), 12 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -11,7 +11,7 @@ - /* hardware definition */ - static const struct snd_pcm_hardware snd_bcm2835_playback_hw = { - .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | -- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_BATCH), -+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), - .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, - .rate_min = 8000, -@@ -81,8 +81,6 @@ void bcm2835_playback_fifo(struct bcm283 - alsa_stream->pos %= alsa_stream->buffer_size; - } - -- alsa_stream->interpolate_start = ktime_get_ns(); -- - if (alsa_stream->substream) { - if (new_period) - snd_pcm_period_elapsed(alsa_stream->substream); -@@ -308,7 +306,6 @@ static int snd_bcm2835_pcm_prepare(struc - alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); - alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); - alsa_stream->pos = 0; -- alsa_stream->interpolate_start = ktime_get_ns(); - - audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", - alsa_stream->buffer_size, alsa_stream->period_size, -@@ -400,19 +397,12 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s - { - struct snd_pcm_runtime *runtime = substream->runtime; - struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; -- u64 now = ktime_get_ns(); - - audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, - frames_to_bytes(runtime, runtime->status->hw_ptr), - frames_to_bytes(runtime, runtime->control->appl_ptr), - alsa_stream->pos); - -- /* Give userspace better delay reporting by interpolating between GPU -- * notifications, assuming audio speed is close enough to the clock -- * used for ktime */ -- if (alsa_stream->interpolate_start && alsa_stream->interpolate_start < now) -- runtime->delay = -(int)div_u64((now - alsa_stream->interpolate_start) * runtime->rate, 1000000000); -- - return snd_pcm_indirect_playback_pointer(substream, - &alsa_stream->pcm_indirect, - alsa_stream->pos); ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -133,7 +133,6 @@ struct bcm2835_alsa_stream { - unsigned int pos; - unsigned int buffer_size; - unsigned int period_size; -- u64 interpolate_start; - - atomic_t retrieved; - struct bcm2835_audio_instance *instance; diff --git a/target/linux/brcm2708/patches-4.19/950-0431-staging-bcm2835-audio-double-free-in-init-error-path.patch b/target/linux/brcm2708/patches-4.19/950-0431-staging-bcm2835-audio-double-free-in-init-error-path.patch new file mode 100644 index 0000000000..95b9d7a1d1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0431-staging-bcm2835-audio-double-free-in-init-error-path.patch @@ -0,0 +1,30 @@ +From 360a1982333c8e8f583663155479115d6eb7cd14 Mon Sep 17 00:00:00 2001 +From: Dan Carpenter +Date: Mon, 17 Dec 2018 10:08:54 +0300 +Subject: [PATCH] staging: bcm2835-audio: double free in init error + path + +commit 136ff5e49271c4c8fceeca5491c48e66b961564b upstream. + +We free instance here and in the caller. It should be only the caller +which handles it. + +Fixes: d7ca3a71545b ("staging: bcm2835-audio: Operate non-atomic PCM ops") +Signed-off-by: Dan Carpenter +Reviewed-by: Takashi Iwai +Cc: stable +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c +@@ -145,7 +145,6 @@ vc_vchi_audio_init(VCHI_INSTANCE_T vchi_ + dev_err(instance->dev, + "failed to open VCHI service connection (status=%d)\n", + status); +- kfree(instance); + return -EPERM; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0432-Revert-staging-bcm2835-audio-Enable-compile-test.patch b/target/linux/brcm2708/patches-4.19/950-0432-Revert-staging-bcm2835-audio-Enable-compile-test.patch deleted file mode 100644 index d5d74f1854..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0432-Revert-staging-bcm2835-audio-Enable-compile-test.patch +++ /dev/null @@ -1,22 +0,0 @@ -From e276e2d7b80259819e399eb3956ca92e5ddafbc3 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 29 Apr 2019 19:16:15 +0100 -Subject: [PATCH 432/806] Revert "staging: bcm2835-audio: Enable compile test" - -commit 4eae66777a262ac9707980ea0cfe902afadfb577 upstream. - -This reverts commit 02d205a57c4c943fc2a5b1ac7c912ce01944f700. ---- - drivers/staging/vc04_services/bcm2835-audio/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/Kconfig -+++ b/drivers/staging/vc04_services/bcm2835-audio/Kconfig -@@ -1,6 +1,6 @@ - config SND_BCM2835 - tristate "BCM2835 Audio" -- depends on (ARCH_BCM2835 || COMPILE_TEST) && SND -+ depends on ARCH_BCM2835 && SND - select SND_PCM - select BCM2835_VCHIQ - help diff --git a/target/linux/brcm2708/patches-4.19/950-0432-dts-Increase-default-coherent-pool-size.patch b/target/linux/brcm2708/patches-4.19/950-0432-dts-Increase-default-coherent-pool-size.patch new file mode 100644 index 0000000000..e39aeb089d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0432-dts-Increase-default-coherent-pool-size.patch @@ -0,0 +1,27 @@ +From e13c663bfc75a628ba25afdf3f3b4a40a2c0250e Mon Sep 17 00:00:00 2001 +From: P33M +Date: Wed, 1 May 2019 15:00:05 +0100 +Subject: [PATCH] dts: Increase default coherent pool size + +dwc_otg allocates DMA-coherent buffers in atomic context for misaligned +transfer buffers. The pool that these allocations come from is set up +at boot-time but can be overridden by a commandline parameter - +increase this for now to prevent failures seen on 4.19 with multiple +USB Ethernet devices. + +see: https://github.com/raspberrypi/linux/issues/2924 +--- + arch/arm/boot/dts/bcm270x.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -3,7 +3,7 @@ + + / { + chosen { +- bootargs = ""; ++ bootargs = "coherent_pool=1M"; + /delete-property/ stdout-path; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0433-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0433-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch new file mode 100644 index 0000000000..c831dc8139 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0433-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch @@ -0,0 +1,96 @@ +From 369f591ee78af2d53c67f561daeb963cc4aa60aa Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 1 May 2019 14:23:39 +0100 +Subject: [PATCH] Revert "staging: bcm2835-audio: Drop DT dependency" + +This reverts commit 60a2e557a4f81480216066f22b84c3dda31b3470. +--- + .../vc04_services/bcm2835-audio/bcm2835.c | 31 +++++++++++++------ + 1 file changed, 22 insertions(+), 9 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -6,13 +6,13 @@ + #include + #include + #include ++#include + + #include "bcm2835.h" + + static bool enable_hdmi; + static bool enable_headphones; + static bool enable_compat_alsa = true; +-static int num_channels = MAX_SUBSTREAMS; + + module_param(enable_hdmi, bool, 0444); + MODULE_PARM_DESC(enable_hdmi, "Enables HDMI virtual audio device"); +@@ -21,8 +21,6 @@ MODULE_PARM_DESC(enable_headphones, "Ena + module_param(enable_compat_alsa, bool, 0444); + MODULE_PARM_DESC(enable_compat_alsa, + "Enables ALSA compatibility virtual audio device"); +-module_param(num_channels, int, 0644); +-MODULE_PARM_DESC(num_channels, "Number of audio channels (default: 8)"); + + static void bcm2835_devm_free_vchi_ctx(struct device *dev, void *res) + { +@@ -296,19 +294,28 @@ static int snd_add_child_devices(struct + static int snd_bcm2835_alsa_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; ++ u32 numchans; + int err; + +- if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) { +- num_channels = MAX_SUBSTREAMS; +- dev_warn(dev, "Illegal num_channels value, will use %u\n", +- num_channels); ++ err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", ++ &numchans); ++ if (err) { ++ dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); ++ return err; ++ } ++ ++ if (numchans == 0 || numchans > MAX_SUBSTREAMS) { ++ numchans = MAX_SUBSTREAMS; ++ dev_warn(dev, ++ "Illegal 'brcm,pwm-channels' value, will use %u\n", ++ numchans); + } + + err = bcm2835_devm_add_vchi_ctx(dev); + if (err) + return err; + +- err = snd_add_child_devices(dev, num_channels); ++ err = snd_add_child_devices(dev, numchans); + if (err) + return err; + +@@ -330,6 +337,12 @@ static int snd_bcm2835_alsa_resume(struc + + #endif + ++static const struct of_device_id snd_bcm2835_of_match_table[] = { ++ { .compatible = "brcm,bcm2835-audio",}, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); ++ + static struct platform_driver bcm2835_alsa_driver = { + .probe = snd_bcm2835_alsa_probe, + #ifdef CONFIG_PM +@@ -338,6 +351,7 @@ static struct platform_driver bcm2835_al + #endif + .driver = { + .name = "bcm2835_audio", ++ .of_match_table = snd_bcm2835_of_match_table, + }, + }; + module_platform_driver(bcm2835_alsa_driver); +@@ -345,4 +359,3 @@ module_platform_driver(bcm2835_alsa_driv + MODULE_AUTHOR("Dom Cobley"); + MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); + MODULE_LICENSE("GPL"); +-MODULE_ALIAS("platform:bcm2835_audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0433-Revert-staging-bcm2835-audio-use-module_platform_dri.patch b/target/linux/brcm2708/patches-4.19/950-0433-Revert-staging-bcm2835-audio-use-module_platform_dri.patch deleted file mode 100644 index e211161496..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0433-Revert-staging-bcm2835-audio-use-module_platform_dri.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 576521feaa6a03f45839c28f1ce0588e4e49b0ca Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 29 Apr 2019 19:16:16 +0100 -Subject: [PATCH 433/806] Revert "staging: bcm2835-audio: use - module_platform_driver() macro" - -commit ed4c2e5dc4216d5dded502bfcf594d3984e6bccd upstream. - -This reverts commit 786ced30fec053b27248ed5b24dcde61ed3f47f6. ---- - .../vc04_services/bcm2835-audio/bcm2835.c | 20 ++++++++++++++++++- - 1 file changed, 19 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -470,7 +470,25 @@ static struct platform_driver bcm2835_al - .of_match_table = snd_bcm2835_of_match_table, - }, - }; --module_platform_driver(bcm2835_alsa0_driver); -+ -+static int bcm2835_alsa_device_init(void) -+{ -+ int retval; -+ -+ retval = platform_driver_register(&bcm2835_alsa0_driver); -+ if (retval) -+ pr_err("Error registering bcm2835_audio driver %d .\n", retval); -+ -+ return retval; -+} -+ -+static void bcm2835_alsa_device_exit(void) -+{ -+ platform_driver_unregister(&bcm2835_alsa0_driver); -+} -+ -+late_initcall(bcm2835_alsa_device_init); -+module_exit(bcm2835_alsa_device_exit); - - MODULE_AUTHOR("Dom Cobley"); - MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); diff --git a/target/linux/brcm2708/patches-4.19/950-0434-smsc95xx-dynamically-fix-up-TX-buffer-alignment-with.patch b/target/linux/brcm2708/patches-4.19/950-0434-smsc95xx-dynamically-fix-up-TX-buffer-alignment-with.patch new file mode 100644 index 0000000000..6891ec28a0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0434-smsc95xx-dynamically-fix-up-TX-buffer-alignment-with.patch @@ -0,0 +1,62 @@ +From 26c79197da4b2911e10c600d79839a82a43a06ff Mon Sep 17 00:00:00 2001 +From: P33M +Date: Wed, 1 May 2019 17:04:32 +0100 +Subject: [PATCH] smsc95xx: dynamically fix up TX buffer alignment with + padding bytes + +dwc_otg requires a 32-bit aligned buffer start address, otherwise +expensive bounce buffers are used. The LAN951x hardware can skip up to +3 bytes between the TX header and the start of frame data, which can +be used to force alignment of the URB passed to dwc_otg. + +As found in https://github.com/raspberrypi/linux/issues/2924 +--- + drivers/net/usb/smsc95xx.c | 12 +++++++----- + drivers/net/usb/smsc95xx.h | 2 +- + 2 files changed, 8 insertions(+), 6 deletions(-) + +--- a/drivers/net/usb/smsc95xx.c ++++ b/drivers/net/usb/smsc95xx.c +@@ -2082,7 +2082,9 @@ static struct sk_buff *smsc95xx_tx_fixup + struct sk_buff *skb, gfp_t flags) + { + bool csum = skb->ip_summed == CHECKSUM_PARTIAL; +- int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD; ++ unsigned int align_bytes = -((uintptr_t)skb->data) & 0x3; ++ int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM + align_bytes ++ : SMSC95XX_TX_OVERHEAD + align_bytes; + u32 tx_cmd_a, tx_cmd_b; + + /* We do not advertise SG, so skbs should be already linearized */ +@@ -2116,16 +2118,16 @@ static struct sk_buff *smsc95xx_tx_fixup + } + } + +- skb_push(skb, 4); +- tx_cmd_b = (u32)(skb->len - 4); ++ skb_push(skb, 4 + align_bytes); ++ tx_cmd_b = (u32)(skb->len - 4 - align_bytes); + if (csum) + tx_cmd_b |= TX_CMD_B_CSUM_ENABLE; + cpu_to_le32s(&tx_cmd_b); + memcpy(skb->data, &tx_cmd_b, 4); + + skb_push(skb, 4); +- tx_cmd_a = (u32)(skb->len - 8) | TX_CMD_A_FIRST_SEG_ | +- TX_CMD_A_LAST_SEG_; ++ tx_cmd_a = (u32)(skb->len - 8 - align_bytes) | TX_CMD_A_FIRST_SEG_ | ++ (align_bytes << 16) | TX_CMD_A_LAST_SEG_; + cpu_to_le32s(&tx_cmd_a); + memcpy(skb->data, &tx_cmd_a, 4); + +--- a/drivers/net/usb/smsc95xx.h ++++ b/drivers/net/usb/smsc95xx.h +@@ -21,7 +21,7 @@ + #define _SMSC95XX_H + + /* Tx command words */ +-#define TX_CMD_A_DATA_OFFSET_ (0x001F0000) /* Data Start Offset */ ++#define TX_CMD_A_DATA_OFFSET_ (0x00030000) /* Data Start Offset */ + #define TX_CMD_A_FIRST_SEG_ (0x00002000) /* First Segment */ + #define TX_CMD_A_LAST_SEG_ (0x00001000) /* Last Segment */ + #define TX_CMD_A_BUF_SIZE_ (0x000007FF) /* Buffer Size */ diff --git a/target/linux/brcm2708/patches-4.19/950-0434-staging-bcm2835-audio-Clean-up-mutex-locks.patch b/target/linux/brcm2708/patches-4.19/950-0434-staging-bcm2835-audio-Clean-up-mutex-locks.patch deleted file mode 100644 index b102e1c36d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0434-staging-bcm2835-audio-Clean-up-mutex-locks.patch +++ /dev/null @@ -1,301 +0,0 @@ -From 96588b9ccaddd69a832a07e2e3f2f3299e6d6c3a Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:30 +0200 -Subject: [PATCH 434/806] staging: bcm2835-audio: Clean up mutex locks - -commit ce4bb1aa271a97047b80ac917a5d91b54925913b upstream. - -snd-bcm2835 driver takes the lock with mutex_lock_interruptible() in -all places, which don't make sense. Replace them with the simple -mutex_lock(). - -Also taking a mutex lock right after creating it for each PCM object -is nonsense, too. It cannot be racy at that point. We can get rid of -it. - -Last but not least, initializing chip->audio_mutex at each place is -error-prone. Initialize properly at creating the chip object in -snd_bcm2835_create() instead. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 18 +++---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 33 ++----------- - .../bcm2835-audio/bcm2835-vchiq.c | 47 ++++--------------- - .../vc04_services/bcm2835-audio/bcm2835.c | 1 + - 4 files changed, 20 insertions(+), 79 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -@@ -77,8 +77,7 @@ static int snd_bcm2835_ctl_get(struct sn - { - struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); - -- if (mutex_lock_interruptible(&chip->audio_mutex)) -- return -EINTR; -+ mutex_lock(&chip->audio_mutex); - - BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK)); - -@@ -99,8 +98,7 @@ static int snd_bcm2835_ctl_put(struct sn - struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); - int changed = 0; - -- if (mutex_lock_interruptible(&chip->audio_mutex)) -- return -EINTR; -+ mutex_lock(&chip->audio_mutex); - - if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { - audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]); -@@ -187,8 +185,7 @@ static int snd_bcm2835_spdif_default_get - struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); - int i; - -- if (mutex_lock_interruptible(&chip->audio_mutex)) -- return -EINTR; -+ mutex_lock(&chip->audio_mutex); - - for (i = 0; i < 4; i++) - ucontrol->value.iec958.status[i] = -@@ -205,8 +202,7 @@ static int snd_bcm2835_spdif_default_put - unsigned int val = 0; - int i, change; - -- if (mutex_lock_interruptible(&chip->audio_mutex)) -- return -EINTR; -+ mutex_lock(&chip->audio_mutex); - - for (i = 0; i < 4; i++) - val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); -@@ -251,8 +247,7 @@ static int snd_bcm2835_spdif_stream_get( - struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); - int i; - -- if (mutex_lock_interruptible(&chip->audio_mutex)) -- return -EINTR; -+ mutex_lock(&chip->audio_mutex); - - for (i = 0; i < 4; i++) - ucontrol->value.iec958.status[i] = -@@ -269,8 +264,7 @@ static int snd_bcm2835_spdif_stream_put( - unsigned int val = 0; - int i, change; - -- if (mutex_lock_interruptible(&chip->audio_mutex)) -- return -EINTR; -+ mutex_lock(&chip->audio_mutex); - - for (i = 0; i < 4; i++) - val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -99,10 +99,7 @@ static int snd_bcm2835_playback_open_gen - int idx; - int err; - -- if (mutex_lock_interruptible(&chip->audio_mutex)) { -- audio_error("Interrupted whilst waiting for lock\n"); -- return -EINTR; -- } -+ mutex_lock(&chip->audio_mutex); - audio_info("Alsa open (%d)\n", substream->number); - idx = substream->number; - -@@ -194,10 +191,7 @@ static int snd_bcm2835_playback_close(st - struct bcm2835_alsa_stream *alsa_stream; - - chip = snd_pcm_substream_chip(substream); -- if (mutex_lock_interruptible(&chip->audio_mutex)) { -- audio_error("Interrupted whilst waiting for lock\n"); -- return -EINTR; -- } -+ mutex_lock(&chip->audio_mutex); - runtime = substream->runtime; - alsa_stream = runtime->private_data; - -@@ -274,8 +268,7 @@ static int snd_bcm2835_pcm_prepare(struc - int channels; - int err; - -- if (mutex_lock_interruptible(&chip->audio_mutex)) -- return -EINTR; -+ mutex_lock(&chip->audio_mutex); - - /* notify the vchiq that it should enter spdif passthrough mode by - * setting channels=0 (see -@@ -449,14 +442,9 @@ int snd_bcm2835_new_pcm(struct bcm2835_c - struct snd_pcm *pcm; - int err; - -- mutex_init(&chip->audio_mutex); -- if (mutex_lock_interruptible(&chip->audio_mutex)) { -- audio_error("Interrupted whilst waiting for lock\n"); -- return -EINTR; -- } - err = snd_pcm_new(chip->card, "bcm2835 ALSA", 0, numchannels, 0, &pcm); - if (err < 0) -- goto out; -+ return err; - pcm->private_data = chip; - strcpy(pcm->name, "bcm2835 ALSA"); - chip->pcm = pcm; -@@ -474,9 +462,6 @@ int snd_bcm2835_new_pcm(struct bcm2835_c - snd_bcm2835_playback_hw.buffer_bytes_max, - snd_bcm2835_playback_hw.buffer_bytes_max); - --out: -- mutex_unlock(&chip->audio_mutex); -- - return 0; - } - -@@ -485,13 +470,9 @@ int snd_bcm2835_new_spdif_pcm(struct bcm - struct snd_pcm *pcm; - int err; - -- if (mutex_lock_interruptible(&chip->audio_mutex)) { -- audio_error("Interrupted whilst waiting for lock\n"); -- return -EINTR; -- } - err = snd_pcm_new(chip->card, "bcm2835 ALSA", 1, 1, 0, &pcm); - if (err < 0) -- goto out; -+ return err; - - pcm->private_data = chip; - strcpy(pcm->name, "bcm2835 IEC958/HDMI"); -@@ -504,8 +485,6 @@ int snd_bcm2835_new_spdif_pcm(struct bcm - snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, - snd_dma_continuous_data(GFP_KERNEL), - snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max); --out: -- mutex_unlock(&chip->audio_mutex); - - return 0; - } -@@ -518,8 +497,6 @@ int snd_bcm2835_new_simple_pcm(struct bc - struct snd_pcm *pcm; - int err; - -- mutex_init(&chip->audio_mutex); -- - err = snd_pcm_new(chip->card, name, 0, numchannels, - 0, &pcm); - if (err) ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -319,11 +319,7 @@ static int vc_vchi_audio_deinit(struct b - } - - LOG_DBG(" .. about to lock (%d)\n", instance->num_connections); -- if (mutex_lock_interruptible(&instance->vchi_mutex)) { -- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", -- instance->num_connections); -- return -EINTR; -- } -+ mutex_lock(&instance->vchi_mutex); - - /* Close all VCHI service connections */ - for (i = 0; i < instance->num_connections; i++) { -@@ -434,11 +430,7 @@ int bcm2835_audio_open(struct bcm2835_al - instance = alsa_stream->instance; - LOG_DBG(" instance (%p)\n", instance); - -- if (mutex_lock_interruptible(&instance->vchi_mutex)) { -- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", instance->num_connections); -- ret = -EINTR; -- goto free_wq; -- } -+ mutex_lock(&instance->vchi_mutex); - vchi_service_use(instance->vchi_handle[0]); - - m.type = VC_AUDIO_MSG_TYPE_OPEN; -@@ -479,11 +471,7 @@ static int bcm2835_audio_set_ctls_chan(s - LOG_INFO(" Setting ALSA dest(%d), volume(%d)\n", - chip->dest, chip->volume); - -- if (mutex_lock_interruptible(&instance->vchi_mutex)) { -- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", -- instance->num_connections); -- return -EINTR; -- } -+ mutex_lock(&instance->vchi_mutex); - vchi_service_use(instance->vchi_handle[0]); - - instance->result = -1; -@@ -569,10 +557,7 @@ int bcm2835_audio_set_params(struct bcm2 - return -EINVAL; - } - -- if (mutex_lock_interruptible(&instance->vchi_mutex)) { -- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", instance->num_connections); -- return -EINTR; -- } -+ mutex_lock(&instance->vchi_mutex); - vchi_service_use(instance->vchi_handle[0]); - - instance->result = -1; -@@ -629,11 +614,7 @@ static int bcm2835_audio_start_worker(st - int status; - int ret; - -- if (mutex_lock_interruptible(&instance->vchi_mutex)) { -- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", -- instance->num_connections); -- return -EINTR; -- } -+ mutex_lock(&instance->vchi_mutex); - vchi_service_use(instance->vchi_handle[0]); - - m.type = VC_AUDIO_MSG_TYPE_START; -@@ -665,11 +646,7 @@ static int bcm2835_audio_stop_worker(str - int status; - int ret; - -- if (mutex_lock_interruptible(&instance->vchi_mutex)) { -- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", -- instance->num_connections); -- return -EINTR; -- } -+ mutex_lock(&instance->vchi_mutex); - vchi_service_use(instance->vchi_handle[0]); - - m.type = VC_AUDIO_MSG_TYPE_STOP; -@@ -704,11 +681,7 @@ int bcm2835_audio_close(struct bcm2835_a - - my_workqueue_quit(alsa_stream); - -- if (mutex_lock_interruptible(&instance->vchi_mutex)) { -- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", -- instance->num_connections); -- return -EINTR; -- } -+ mutex_lock(&instance->vchi_mutex); - vchi_service_use(instance->vchi_handle[0]); - - m.type = VC_AUDIO_MSG_TYPE_CLOSE; -@@ -761,11 +734,7 @@ static int bcm2835_audio_write_worker(st - - LOG_INFO(" Writing %d bytes from %p\n", count, src); - -- if (mutex_lock_interruptible(&instance->vchi_mutex)) { -- LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", -- instance->num_connections); -- return -EINTR; -- } -+ mutex_lock(&instance->vchi_mutex); - vchi_service_use(instance->vchi_handle[0]); - - if (instance->peer_version == 0 && ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -149,6 +149,7 @@ static int snd_bcm2835_create(struct snd - return -ENOMEM; - - chip->card = card; -+ mutex_init(&chip->audio_mutex); - - chip->vchi_ctx = devres_find(card->dev->parent, - bcm2835_devm_free_vchi_ctx, NULL, NULL); diff --git a/target/linux/brcm2708/patches-4.19/950-0435-lan78xx-use-default-alignment-for-rx-buffers.patch b/target/linux/brcm2708/patches-4.19/950-0435-lan78xx-use-default-alignment-for-rx-buffers.patch new file mode 100644 index 0000000000..9608504500 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0435-lan78xx-use-default-alignment-for-rx-buffers.patch @@ -0,0 +1,23 @@ +From fdbe849f960ee92befd781cff14d9b76142b0981 Mon Sep 17 00:00:00 2001 +From: P33M +Date: Thu, 2 May 2019 11:53:45 +0100 +Subject: [PATCH] lan78xx: use default alignment for rx buffers + +The lan78xx uses a 12-byte hardware rx header, so there is no need +to allocate SKBs with NET_IP_ALIGN set. Removes alignment faults +in both dwc_otg and in ipv6 processing. +--- + drivers/net/usb/lan78xx.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/usb/lan78xx.c ++++ b/drivers/net/usb/lan78xx.c +@@ -3258,7 +3258,7 @@ static int rx_submit(struct lan78xx_net + size_t size = dev->rx_urb_size; + int ret = 0; + +- skb = netdev_alloc_skb_ip_align(dev->net, size); ++ skb = netdev_alloc_skb(dev->net, size); + if (!skb) { + usb_free_urb(urb); + return -ENOMEM; diff --git a/target/linux/brcm2708/patches-4.19/950-0435-staging-bcm2835-audio-Remove-redundant-spdif-stream-.patch b/target/linux/brcm2708/patches-4.19/950-0435-staging-bcm2835-audio-Remove-redundant-spdif-stream-.patch deleted file mode 100644 index 9b5ff7a762..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0435-staging-bcm2835-audio-Remove-redundant-spdif-stream-.patch +++ /dev/null @@ -1,89 +0,0 @@ -From a1a77a925422be3f0c48002c2aa6c6d898a37f95 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:31 +0200 -Subject: [PATCH 435/806] staging: bcm2835-audio: Remove redundant spdif stream - ctls - -commit ab91e26229eaca2832df51e13c1285aea3be33ab upstream. - -The "IEC958 Playback Stream" control does basically the very same -thing as "IEC958 Playback Default" redundantly. The former should -have been stream-specific and restored after closing the stream, but -we don't do in that way. - -Since it's nothing but confusion, remove this fake. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 51 ------------------- - 1 file changed, 51 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -@@ -233,48 +233,6 @@ static int snd_bcm2835_spdif_mask_get(st - return 0; - } - --static int snd_bcm2835_spdif_stream_info(struct snd_kcontrol *kcontrol, -- struct snd_ctl_elem_info *uinfo) --{ -- uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; -- uinfo->count = 1; -- return 0; --} -- --static int snd_bcm2835_spdif_stream_get(struct snd_kcontrol *kcontrol, -- struct snd_ctl_elem_value *ucontrol) --{ -- struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); -- int i; -- -- mutex_lock(&chip->audio_mutex); -- -- for (i = 0; i < 4; i++) -- ucontrol->value.iec958.status[i] = -- (chip->spdif_status >> (i * 8)) & 0xff; -- -- mutex_unlock(&chip->audio_mutex); -- return 0; --} -- --static int snd_bcm2835_spdif_stream_put(struct snd_kcontrol *kcontrol, -- struct snd_ctl_elem_value *ucontrol) --{ -- struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); -- unsigned int val = 0; -- int i, change; -- -- mutex_lock(&chip->audio_mutex); -- -- for (i = 0; i < 4; i++) -- val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); -- change = val != chip->spdif_status; -- chip->spdif_status = val; -- -- mutex_unlock(&chip->audio_mutex); -- return change; --} -- - static struct snd_kcontrol_new snd_bcm2835_spdif[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, -@@ -290,15 +248,6 @@ static struct snd_kcontrol_new snd_bcm28 - .info = snd_bcm2835_spdif_mask_info, - .get = snd_bcm2835_spdif_mask_get, - }, -- { -- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | -- SNDRV_CTL_ELEM_ACCESS_INACTIVE, -- .iface = SNDRV_CTL_ELEM_IFACE_PCM, -- .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM), -- .info = snd_bcm2835_spdif_stream_info, -- .get = snd_bcm2835_spdif_stream_get, -- .put = snd_bcm2835_spdif_stream_put, -- }, - }; - - int snd_bcm2835_new_ctl(struct bcm2835_chip *chip) diff --git a/target/linux/brcm2708/patches-4.19/950-0436-staging-bcm2835-audio-Clean-up-include-files-in-bcm2.patch b/target/linux/brcm2708/patches-4.19/950-0436-staging-bcm2835-audio-Clean-up-include-files-in-bcm2.patch deleted file mode 100644 index ab61997c74..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0436-staging-bcm2835-audio-Clean-up-include-files-in-bcm2.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 8eb8e04a27188f6abc22d09b4a1fffbec10d45f4 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:32 +0200 -Subject: [PATCH 436/806] staging: bcm2835-audio: Clean up include files in - bcm2835-ctl.c - -commit 821950d3da4bf97bcfedcb812176a0f26b833db0 upstream. - -Only a few of them are really needed. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 15 --------------- - 1 file changed, 15 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -@@ -1,23 +1,8 @@ - // SPDX-License-Identifier: GPL-2.0 - /* Copyright 2011 Broadcom Corporation. All rights reserved. */ - --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include -- - #include - #include --#include --#include --#include --#include - #include - #include - diff --git a/target/linux/brcm2708/patches-4.19/950-0436-staging-bcm2835-codec-Correct-port-width-calc-for-tr.patch b/target/linux/brcm2708/patches-4.19/950-0436-staging-bcm2835-codec-Correct-port-width-calc-for-tr.patch new file mode 100644 index 0000000000..9e25fe1016 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0436-staging-bcm2835-codec-Correct-port-width-calc-for-tr.patch @@ -0,0 +1,29 @@ +From 453caa19909edf2de1add80b369fb30570a440ed Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 2 May 2019 14:30:24 +0100 +Subject: [PATCH] staging: bcm2835-codec: Correct port width calc for + truncation + +The calculation converting from V4L2 bytesperline to MMAL +width had an operator ordering issue that lead to Bayer raw 10 +(and 12 and 14) setting an incorrect stride for the buffer. +Correct this operation ordering issue. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -605,8 +605,8 @@ static void setup_mmal_port_format(struc + + if (!(q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED)) { + /* Raw image format - set width/height */ +- port->es.video.width = q_data->bytesperline / +- (q_data->fmt->depth >> 3); ++ port->es.video.width = (q_data->bytesperline << 3) / ++ q_data->fmt->depth; + port->es.video.height = q_data->height; + port->es.video.crop.width = q_data->crop_width; + port->es.video.crop.height = q_data->crop_height; diff --git a/target/linux/brcm2708/patches-4.19/950-0437-staging-bcm2835-audio-Remove-redundant-substream-mas.patch b/target/linux/brcm2708/patches-4.19/950-0437-staging-bcm2835-audio-Remove-redundant-substream-mas.patch deleted file mode 100644 index 2c052b16bc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0437-staging-bcm2835-audio-Remove-redundant-substream-mas.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 1120b4699738a3ee748314c433a96e45182a3411 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:33 +0200 -Subject: [PATCH 437/806] staging: bcm2835-audio: Remove redundant substream - mask checks - -commit 14b1f4cba853a11c7b381ad919622f38eb194bd7 upstream. - -The avail_substreams bit mask is checked for the possible racy -accesses, but this cannot happen in practice; i.e. the assignment and -the check are superfluous. - -Let's rip them off. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 2 -- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 8 -------- - .../vc04_services/bcm2835-audio/bcm2835-vchiq.c | 17 +++++++---------- - .../vc04_services/bcm2835-audio/bcm2835.c | 5 +---- - .../vc04_services/bcm2835-audio/bcm2835.h | 2 -- - 5 files changed, 8 insertions(+), 26 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -@@ -64,8 +64,6 @@ static int snd_bcm2835_ctl_get(struct sn - - mutex_lock(&chip->audio_mutex); - -- BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK)); -- - if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) - ucontrol->value.integer.value[0] = chip2alsa(chip->volume); - else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -118,14 +118,6 @@ static int snd_bcm2835_playback_open_gen - goto out; - } - -- /* Check if we are ready */ -- if (!(chip->avail_substreams & (1 << idx))) { -- /* We are not ready yet */ -- audio_error("substream(%d) device is not ready yet\n", idx); -- err = -EAGAIN; -- goto out; -- } -- - alsa_stream = kzalloc(sizeof(*alsa_stream), GFP_KERNEL); - if (!alsa_stream) { - err = -ENOMEM; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -523,16 +523,13 @@ int bcm2835_audio_set_ctls(struct bcm283 - - /* change ctls for all substreams */ - for (i = 0; i < MAX_SUBSTREAMS; i++) { -- if (chip->avail_substreams & (1 << i)) { -- if (!chip->alsa_stream[i]) { -- LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams); -- ret = 0; -- } else if (bcm2835_audio_set_ctls_chan(chip->alsa_stream[i], chip) != 0) { -- LOG_ERR("Couldn't set the controls for stream %d\n", i); -- ret = -1; -- } else { -- LOG_DBG(" Controls set for stream %d\n", i); -- } -+ if (!chip->alsa_stream[i]) -+ continue; -+ if (bcm2835_audio_set_ctls_chan(chip->alsa_stream[i], chip) != 0) { -+ LOG_ERR("Couldn't set the controls for stream %d\n", i); -+ ret = -1; -+ } else { -+ LOG_DBG(" Controls set for stream %d\n", i); - } - } - return ret; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -280,7 +280,7 @@ static int snd_add_child_device(struct d - struct snd_card *card; - struct device *child; - struct bcm2835_chip *chip; -- int err, i; -+ int err; - - child = snd_create_device(device, &audio_driver->driver, - audio_driver->driver.name); -@@ -325,9 +325,6 @@ static int snd_add_child_device(struct d - return err; - } - -- for (i = 0; i < numchans; i++) -- chip->avail_substreams |= (1 << i); -- - err = snd_card_register(card); - if (err) { - dev_err(child, "Failed to register card, error %d\n", err); ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -98,8 +98,6 @@ struct bcm2835_chip { - struct snd_card *card; - struct snd_pcm *pcm; - struct snd_pcm *pcm_spdif; -- /* Bitmat for valid reg_base and irq numbers */ -- unsigned int avail_substreams; - struct device *dev; - struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS]; - diff --git a/target/linux/brcm2708/patches-4.19/950-0437-staging-bcm2835-codec-Remove-height-padding-for-ISP-.patch b/target/linux/brcm2708/patches-4.19/950-0437-staging-bcm2835-codec-Remove-height-padding-for-ISP-.patch new file mode 100644 index 0000000000..6f99736d6a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0437-staging-bcm2835-codec-Remove-height-padding-for-ISP-.patch @@ -0,0 +1,61 @@ +From 52e50b0f5017e823428849c42c1029306d790939 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 2 May 2019 14:32:21 +0100 +Subject: [PATCH] staging: bcm2835-codec: Remove height padding for ISP + role + +The ISP has no need for heights to be a multiple of macroblock +sizes, therefore doesn't require the align on the height. +Remove it for the ISP role. (It is required for the codecs). + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -1015,7 +1015,8 @@ static int vidioc_g_fmt_vid_cap(struct f + return vidioc_g_fmt(file2ctx(file), f); + } + +-static int vidioc_try_fmt(struct v4l2_format *f, struct bcm2835_codec_fmt *fmt) ++static int vidioc_try_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f, ++ struct bcm2835_codec_fmt *fmt) + { + /* + * The V4L2 specification requires the driver to correct the format +@@ -1034,11 +1035,13 @@ static int vidioc_try_fmt(struct v4l2_fo + f->fmt.pix.height = MIN_H; + + /* +- * Buffer must have a vertical alignment of 16 lines. ++ * For codecs the buffer must have a vertical alignment of 16 ++ * lines. + * The selection will reflect any cropping rectangle when only + * some of the pixels are active. + */ +- f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); ++ if (ctx->dev->role != ISP) ++ f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); + } + f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, + fmt); +@@ -1065,7 +1068,7 @@ static int vidioc_try_fmt_vid_cap(struct + fmt = find_format(f, ctx->dev, true); + } + +- return vidioc_try_fmt(f, fmt); ++ return vidioc_try_fmt(ctx, f, fmt); + } + + static int vidioc_try_fmt_vid_out(struct file *file, void *priv, +@@ -1084,7 +1087,7 @@ static int vidioc_try_fmt_vid_out(struct + if (!f->fmt.pix.colorspace) + f->fmt.pix.colorspace = ctx->colorspace; + +- return vidioc_try_fmt(f, fmt); ++ return vidioc_try_fmt(ctx, f, fmt); + } + + static int vidioc_s_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f, diff --git a/target/linux/brcm2708/patches-4.19/950-0438-staging-bcm2835-audio-Fix-mute-controls-volume-handl.patch b/target/linux/brcm2708/patches-4.19/950-0438-staging-bcm2835-audio-Fix-mute-controls-volume-handl.patch deleted file mode 100644 index 4a478fce42..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0438-staging-bcm2835-audio-Fix-mute-controls-volume-handl.patch +++ /dev/null @@ -1,273 +0,0 @@ -From 31e4f118a750f4ddb2aeaaf02c5f3630fb50a176 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:34 +0200 -Subject: [PATCH 438/806] staging: bcm2835-audio: Fix mute controls, volume - handling cleanup - -commit 495e5a0d83d3902c741771f267a702ae19da8ab6 upstream. - -In the current code, the mute control is dealt in a special manner, -modifying the current volume and saving the old volume, etc. This is -inconsistent (e.g. change the volume while muted, then unmute), and -way too complex. - -Also, the whole volume handling code has conversion between ALSA -volume and raw volume values, which can lead to another -inconsistency and complexity. - -This patch simplifies these points: -- The ALSA volume value is saved in chip->volume -- volume->mute saves the mute state -- The mute state is evaluated only when the actual volume is passed to - the hardware, bcm2835_audio_set_ctls() - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 84 +++++++------------ - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 6 +- - .../bcm2835-audio/bcm2835-vchiq.c | 32 ++----- - .../vc04_services/bcm2835-audio/bcm2835.h | 5 +- - 4 files changed, 45 insertions(+), 82 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -@@ -12,6 +12,21 @@ - #define CTRL_VOL_MAX 400 - #define CTRL_VOL_MIN -10239 /* originally -10240 */ - -+static int bcm2835_audio_set_chip_ctls(struct bcm2835_chip *chip) -+{ -+ int i, err = 0; -+ -+ /* change ctls for all substreams */ -+ for (i = 0; i < MAX_SUBSTREAMS; i++) { -+ if (chip->alsa_stream[i]) { -+ err = bcm2835_audio_set_ctls(chip->alsa_stream[i]); -+ if (err < 0) -+ break; -+ } -+ } -+ return err; -+} -+ - static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) - { -@@ -34,29 +49,6 @@ static int snd_bcm2835_ctl_info(struct s - return 0; - } - --/* toggles mute on or off depending on the value of nmute, and returns -- * 1 if the mute value was changed, otherwise 0 -- */ --static int toggle_mute(struct bcm2835_chip *chip, int nmute) --{ -- /* if settings are ok, just return 0 */ -- if (chip->mute == nmute) -- return 0; -- -- /* if the sound is muted then we need to unmute */ -- if (chip->mute == CTRL_VOL_MUTE) { -- chip->volume = chip->old_volume; /* copy the old volume back */ -- audio_info("Unmuting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); -- } else /* otherwise we mute */ { -- chip->old_volume = chip->volume; -- chip->volume = 26214; /* set volume to minimum level AKA mute */ -- audio_info("Muting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); -- } -- -- chip->mute = nmute; -- return 1; --} -- - static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) - { -@@ -65,7 +57,7 @@ static int snd_bcm2835_ctl_get(struct sn - mutex_lock(&chip->audio_mutex); - - if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) -- ucontrol->value.integer.value[0] = chip2alsa(chip->volume); -+ ucontrol->value.integer.value[0] = chip->volume; - else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) - ucontrol->value.integer.value[0] = chip->mute; - else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) -@@ -79,38 +71,26 @@ static int snd_bcm2835_ctl_put(struct sn - struct snd_ctl_elem_value *ucontrol) - { - struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); -+ int val, *valp; - int changed = 0; - -- mutex_lock(&chip->audio_mutex); -- -- if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { -- audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]); -- if (chip->mute == CTRL_VOL_MUTE) { -- /* changed = toggle_mute(chip, CTRL_VOL_UNMUTE); */ -- changed = 1; /* should return 0 to signify no change but the mixer takes this as the opposite sign (no idea why) */ -- goto unlock; -- } -- if (changed || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) { -- chip->volume = alsa2chip(ucontrol->value.integer.value[0]); -- changed = 1; -- } -- -- } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { -- /* Now implemented */ -- audio_info(" Mute attempted\n"); -- changed = toggle_mute(chip, ucontrol->value.integer.value[0]); -+ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) -+ valp = &chip->volume; -+ else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) -+ valp = &chip->mute; -+ else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) -+ valp = &chip->dest; -+ else -+ return -EINVAL; - -- } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { -- if (ucontrol->value.integer.value[0] != chip->dest) { -- chip->dest = ucontrol->value.integer.value[0]; -- changed = 1; -- } -+ val = ucontrol->value.integer.value[0]; -+ mutex_lock(&chip->audio_mutex); -+ if (val != *valp) { -+ *valp = val; -+ changed = 1; -+ if (bcm2835_audio_set_chip_ctls(chip)) -+ dev_err(chip->card->dev, "Failed to set ALSA controls..\n"); - } -- -- if (changed && bcm2835_audio_set_ctls(chip)) -- dev_err(chip->card->dev, "Failed to set ALSA controls..\n"); -- --unlock: - mutex_unlock(&chip->audio_mutex); - return changed; - } ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -280,7 +280,7 @@ static int snd_bcm2835_pcm_prepare(struc - bcm2835_audio_setup(alsa_stream); - - /* in preparation of the stream, set the controls (volume level) of the stream */ -- bcm2835_audio_set_ctls(alsa_stream->chip); -+ bcm2835_audio_set_ctls(alsa_stream); - - memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); - -@@ -441,7 +441,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_c - strcpy(pcm->name, "bcm2835 ALSA"); - chip->pcm = pcm; - chip->dest = AUDIO_DEST_AUTO; -- chip->volume = alsa2chip(0); -+ chip->volume = 0; - chip->mute = CTRL_VOL_UNMUTE; /*disable mute on startup */ - /* set operators */ - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, -@@ -498,7 +498,7 @@ int snd_bcm2835_new_simple_pcm(struct bc - strcpy(pcm->name, name); - chip->pcm = pcm; - chip->dest = route; -- chip->volume = alsa2chip(0); -+ chip->volume = 0; - chip->mute = CTRL_VOL_UNMUTE; - - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -460,11 +460,11 @@ free_wq: - return ret; - } - --static int bcm2835_audio_set_ctls_chan(struct bcm2835_alsa_stream *alsa_stream, -- struct bcm2835_chip *chip) -+int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream) - { - struct vc_audio_msg m; - struct bcm2835_audio_instance *instance = alsa_stream->instance; -+ struct bcm2835_chip *chip = alsa_stream->chip; - int status; - int ret; - -@@ -478,7 +478,10 @@ static int bcm2835_audio_set_ctls_chan(s - - m.type = VC_AUDIO_MSG_TYPE_CONTROL; - m.u.control.dest = chip->dest; -- m.u.control.volume = chip->volume; -+ if (!chip->mute) -+ m.u.control.volume = CHIP_MIN_VOLUME; -+ else -+ m.u.control.volume = alsa2chip(chip->volume); - - /* Create the message available completion */ - init_completion(&instance->msg_avail_comp); -@@ -514,27 +517,6 @@ unlock: - return ret; - } - --int bcm2835_audio_set_ctls(struct bcm2835_chip *chip) --{ -- int i; -- int ret = 0; -- -- LOG_DBG(" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume); -- -- /* change ctls for all substreams */ -- for (i = 0; i < MAX_SUBSTREAMS; i++) { -- if (!chip->alsa_stream[i]) -- continue; -- if (bcm2835_audio_set_ctls_chan(chip->alsa_stream[i], chip) != 0) { -- LOG_ERR("Couldn't set the controls for stream %d\n", i); -- ret = -1; -- } else { -- LOG_DBG(" Controls set for stream %d\n", i); -- } -- } -- return ret; --} -- - int bcm2835_audio_set_params(struct bcm2835_alsa_stream *alsa_stream, - unsigned int channels, unsigned int samplerate, - unsigned int bps) -@@ -548,7 +530,7 @@ int bcm2835_audio_set_params(struct bcm2 - channels, samplerate, bps); - - /* resend ctls - alsa_stream may not have been open when first send */ -- ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip); -+ ret = bcm2835_audio_set_ctls(alsa_stream); - if (ret) { - LOG_ERR(" Alsa controls not supported\n"); - return -EINVAL; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -74,6 +74,8 @@ enum { - // convert chip to alsa volume - #define chip2alsa(vol) -(((vol) * 100) >> 8) - -+#define CHIP_MIN_VOLUME 26214 /* minimum level aka mute */ -+ - /* Some constants for values .. */ - enum snd_bcm2835_route { - AUDIO_DEST_AUTO = 0, -@@ -102,7 +104,6 @@ struct bcm2835_chip { - struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS]; - - int volume; -- int old_volume; /* stores the volume value whist muted */ - int dest; - int mute; - -@@ -160,7 +161,7 @@ int bcm2835_audio_set_params(struct bcm2 - int bcm2835_audio_setup(struct bcm2835_alsa_stream *alsa_stream); - int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream); - int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream); --int bcm2835_audio_set_ctls(struct bcm2835_chip *chip); -+int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream); - int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream, - unsigned int count, - void *src); diff --git a/target/linux/brcm2708/patches-4.19/950-0438-staging-mmal-vchiq-Free-the-event-context-for-contro.patch b/target/linux/brcm2708/patches-4.19/950-0438-staging-mmal-vchiq-Free-the-event-context-for-contro.patch new file mode 100644 index 0000000000..edd4c7864b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0438-staging-mmal-vchiq-Free-the-event-context-for-contro.patch @@ -0,0 +1,28 @@ +From 6737574b4d3af54a56d2f9c49f516fb75d06a556 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 1 May 2019 13:27:23 +0100 +Subject: [PATCH] staging: mmal-vchiq: Free the event context for + control ports + +vchiq_mmal_component_init calls init_event_context for the +control port, but vchiq_mmal_component_finalise didn't free +it, causing a memory leak.. + +Add the free call. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -1982,6 +1982,8 @@ int vchiq_mmal_component_finalise(struct + for (idx = 0; idx < component->clocks; idx++) + free_event_context(&component->clock[idx]); + ++ free_event_context(&component->control); ++ + mutex_unlock(&instance->vchiq_mutex); + + return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0439-BCM270X_DT-Also-set-coherent_pool-1M-for-BT-Pis.patch b/target/linux/brcm2708/patches-4.19/950-0439-BCM270X_DT-Also-set-coherent_pool-1M-for-BT-Pis.patch new file mode 100644 index 0000000000..6b67955ee3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0439-BCM270X_DT-Also-set-coherent_pool-1M-for-BT-Pis.patch @@ -0,0 +1,47 @@ +From f9c0f8057ffee5c039fe20c3e2dcd7fea70222e9 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 2 May 2019 22:14:34 +0100 +Subject: [PATCH] BCM270X_DT: Also set coherent_pool=1M for BT Pis + +See: https://github.com/raspberrypi/linux/issues/2924 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 2 +- + arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 2 +- + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 2 +- + 3 files changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts +@@ -8,7 +8,7 @@ + model = "Raspberry Pi Zero W"; + + chosen { +- bootargs = "8250.nr_uarts=1"; ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; + }; + + aliases { +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts +@@ -9,7 +9,7 @@ + model = "Raspberry Pi 3 Model B+"; + + chosen { +- bootargs = "8250.nr_uarts=1"; ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; + }; + + aliases { +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -9,7 +9,7 @@ + model = "Raspberry Pi 3 Model B"; + + chosen { +- bootargs = "8250.nr_uarts=1"; ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; + }; + + aliases { diff --git a/target/linux/brcm2708/patches-4.19/950-0439-staging-bcm2835-audio-Remove-redundant-function-call.patch b/target/linux/brcm2708/patches-4.19/950-0439-staging-bcm2835-audio-Remove-redundant-function-call.patch deleted file mode 100644 index acae9e896e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0439-staging-bcm2835-audio-Remove-redundant-function-call.patch +++ /dev/null @@ -1,95 +0,0 @@ -From 79a3c1a4419b2bf04f6ff5ef84cd74b0456fdd9a Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:35 +0200 -Subject: [PATCH 439/806] staging: bcm2835-audio: Remove redundant function - calls - -commit 124950ebe9fa8547c59e8d4acc8d6c59e6278ed6 upstream. - -bcm2835_audio_setup(), bcm2835_audio_flush_buffers() and -bcm2835_audio_flush_playback_buffers() functions do implement -nothing. - -Also, bcm2835_audio_set_ctls() is already called inside -bcm2835_audio_set_params(), so the later call is superfluous. - -This patch removes these superfluous implementations. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 5 ----- - .../bcm2835-audio/bcm2835-vchiq.c | 21 ------------------- - .../vc04_services/bcm2835-audio/bcm2835.h | 3 --- - 3 files changed, 29 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -277,11 +277,6 @@ static int snd_bcm2835_pcm_prepare(struc - if (err < 0) - audio_error(" error setting hw params\n"); - -- bcm2835_audio_setup(alsa_stream); -- -- /* in preparation of the stream, set the controls (volume level) of the stream */ -- bcm2835_audio_set_ctls(alsa_stream); -- - memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); - - alsa_stream->pcm_indirect.hw_buffer_size = ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -580,12 +580,6 @@ unlock: - return ret; - } - --int bcm2835_audio_setup(struct bcm2835_alsa_stream *alsa_stream) --{ -- -- return 0; --} -- - static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream) - { - struct vc_audio_msg m; -@@ -774,21 +768,6 @@ unlock: - return ret; - } - --/** -- * Returns all buffers from arm->vc -- */ --void bcm2835_audio_flush_buffers(struct bcm2835_alsa_stream *alsa_stream) --{ --} -- --/** -- * Forces VC to flush(drop) its filled playback buffers and -- * return them the us. (VC->ARM) -- */ --void bcm2835_audio_flush_playback_buffers(struct bcm2835_alsa_stream *alsa_stream) --{ --} -- - unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream) - { - unsigned int count = atomic_read(&alsa_stream->retrieved); ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -158,7 +158,6 @@ int bcm2835_audio_close(struct bcm2835_a - int bcm2835_audio_set_params(struct bcm2835_alsa_stream *alsa_stream, - unsigned int channels, unsigned int samplerate, - unsigned int bps); --int bcm2835_audio_setup(struct bcm2835_alsa_stream *alsa_stream); - int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream); - int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream); - int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream); -@@ -167,7 +166,5 @@ int bcm2835_audio_write(struct bcm2835_a - void *src); - void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream); - unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream); --void bcm2835_audio_flush_buffers(struct bcm2835_alsa_stream *alsa_stream); --void bcm2835_audio_flush_playback_buffers(struct bcm2835_alsa_stream *alsa_stream); - - #endif /* __SOUND_ARM_BCM2835_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0440-arm-dts-overlays-rpi-sense-add-upstream-humidity-com.patch b/target/linux/brcm2708/patches-4.19/950-0440-arm-dts-overlays-rpi-sense-add-upstream-humidity-com.patch new file mode 100644 index 0000000000..568cd82e56 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0440-arm-dts-overlays-rpi-sense-add-upstream-humidity-com.patch @@ -0,0 +1,26 @@ +From 50d3f15ea5d6ca2705a009722dd7d4108c9f75d9 Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Sun, 5 May 2019 21:07:12 +0100 +Subject: [PATCH] arm: dts: overlays: rpi-sense: add upstream humidity + compatible + +The upstream humidiity driver uses "st,hts221" for the compatible +string so add that in as well so it will work with an unmodified +upstream kernel driver. We leave the downstream as the priority. + +Signed-off-by: Peter Robinson +--- + arch/arm/boot/dts/overlays/rpi-sense-overlay.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts +@@ -38,7 +38,7 @@ + }; + + hts221-humid@5f { +- compatible = "st,hts221-humid"; ++ compatible = "st,hts221-humid", "st,hts221"; + reg = <0x5f>; + status = "okay"; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0440-staging-bcm2835-audio-Remove-superfluous-open-flag.patch b/target/linux/brcm2708/patches-4.19/950-0440-staging-bcm2835-audio-Remove-superfluous-open-flag.patch deleted file mode 100644 index b471e3bc89..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0440-staging-bcm2835-audio-Remove-superfluous-open-flag.patch +++ /dev/null @@ -1,61 +0,0 @@ -From af2fe52ef43c1aa6a24d1c51ad3ccddc39a12c51 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:36 +0200 -Subject: [PATCH 440/806] staging: bcm2835-audio: Remove superfluous open flag - -commit ad13924de6b07cb52714ea1809c57b2e72a24504 upstream. - -All the alsa_stream->open flag checks in the current code are -redundant, and they cannot be racy. For the code simplification, -let's remove the flag and its check. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 9 ++------- - drivers/staging/vc04_services/bcm2835-audio/bcm2835.h | 1 - - 2 files changed, 2 insertions(+), 8 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -57,8 +57,7 @@ void bcm2835_playback_fifo(struct bcm283 - audio_info("alsa_stream=%p substream=%p\n", alsa_stream, - alsa_stream ? alsa_stream->substream : 0); - -- if (alsa_stream->open) -- consumed = bcm2835_audio_retrieve_buffers(alsa_stream); -+ consumed = bcm2835_audio_retrieve_buffers(alsa_stream); - - /* We get called only if playback was triggered, So, the number of buffers we retrieve in - * each iteration are the buffers that have been played out already -@@ -154,7 +153,6 @@ static int snd_bcm2835_playback_open_gen - chip->alsa_stream[idx] = alsa_stream; - - chip->opened |= (1 << idx); -- alsa_stream->open = 1; - alsa_stream->draining = 1; - - out: -@@ -205,10 +203,7 @@ static int snd_bcm2835_playback_close(st - alsa_stream->period_size = 0; - alsa_stream->buffer_size = 0; - -- if (alsa_stream->open) { -- alsa_stream->open = 0; -- bcm2835_audio_close(alsa_stream); -- } -+ bcm2835_audio_close(alsa_stream); - if (alsa_stream->chip) - alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; - /* ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -121,7 +121,6 @@ struct bcm2835_alsa_stream { - - spinlock_t lock; - -- int open; - int running; - int draining; - diff --git a/target/linux/brcm2708/patches-4.19/950-0441-staging-bcm2835-audio-Drop-useless-running-flag-and-.patch b/target/linux/brcm2708/patches-4.19/950-0441-staging-bcm2835-audio-Drop-useless-running-flag-and-.patch deleted file mode 100644 index d690ee1b98..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0441-staging-bcm2835-audio-Drop-useless-running-flag-and-.patch +++ /dev/null @@ -1,106 +0,0 @@ -From e8a202b4d06a07ba42b91a1dd3c2d9e9cedff32d Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:37 +0200 -Subject: [PATCH 441/806] staging: bcm2835-audio: Drop useless running flag and - check - -commit 02f2376321d75e78117f39ff81f215254ee6b4ef upstream. - -The running flag of alsa_stream is basically useless. The running -state is strictly controlled in ALSA PCM core side, hence the check in -PCM trigger and close callbacks are superfluous. - -Also, the prefill ack at trigger start became superfluous nowadays -with the ALSA PCM core update. - -Let's rip them off. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 46 ++++--------------- - .../vc04_services/bcm2835-audio/bcm2835.h | 1 - - 2 files changed, 8 insertions(+), 39 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -187,19 +187,6 @@ static int snd_bcm2835_playback_close(st - - audio_info("Alsa close\n"); - -- /* -- * Call stop if it's still running. This happens when app -- * is force killed and we don't get a stop trigger. -- */ -- if (alsa_stream->running) { -- int err; -- -- err = bcm2835_audio_stop(alsa_stream); -- alsa_stream->running = 0; -- if (err) -- audio_error(" Failed to STOP alsa device\n"); -- } -- - alsa_stream->period_size = 0; - alsa_stream->buffer_size = 0; - -@@ -324,27 +311,13 @@ static int snd_bcm2835_pcm_trigger(struc - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: -- audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n", -- alsa_stream->running); -- if (!alsa_stream->running) { -- err = bcm2835_audio_start(alsa_stream); -- if (!err) { -- alsa_stream->pcm_indirect.hw_io = -- alsa_stream->pcm_indirect.hw_data = -- bytes_to_frames(runtime, -- alsa_stream->pos); -- substream->ops->ack(substream); -- alsa_stream->running = 1; -- alsa_stream->draining = 1; -- } else { -- audio_error(" Failed to START alsa device (%d)\n", err); -- } -- } -+ err = bcm2835_audio_start(alsa_stream); -+ if (!err) -+ alsa_stream->draining = 1; -+ else -+ audio_error(" Failed to START alsa device (%d)\n", err); - break; - case SNDRV_PCM_TRIGGER_STOP: -- audio_debug -- ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n", -- alsa_stream->running, runtime->status->state == SNDRV_PCM_STATE_DRAINING); - if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) { - audio_info("DRAINING\n"); - alsa_stream->draining = 1; -@@ -352,12 +325,9 @@ static int snd_bcm2835_pcm_trigger(struc - audio_info("DROPPING\n"); - alsa_stream->draining = 0; - } -- if (alsa_stream->running) { -- err = bcm2835_audio_stop(alsa_stream); -- if (err != 0) -- audio_error(" Failed to STOP alsa device (%d)\n", err); -- alsa_stream->running = 0; -- } -+ err = bcm2835_audio_stop(alsa_stream); -+ if (err != 0) -+ audio_error(" Failed to STOP alsa device (%d)\n", err); - break; - default: - err = -EINVAL; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -121,7 +121,6 @@ struct bcm2835_alsa_stream { - - spinlock_t lock; - -- int running; - int draining; - - int channels; diff --git a/target/linux/brcm2708/patches-4.19/950-0441-staging-mmal-vchiq-Fix-memory-leak-in-error-path.patch b/target/linux/brcm2708/patches-4.19/950-0441-staging-mmal-vchiq-Fix-memory-leak-in-error-path.patch new file mode 100644 index 0000000000..bfa88dd4f7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0441-staging-mmal-vchiq-Fix-memory-leak-in-error-path.patch @@ -0,0 +1,67 @@ +From 250db0df9643d122e00313313102c642f1adac72 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 2 May 2019 15:50:01 +0100 +Subject: [PATCH] staging: mmal-vchiq: Fix memory leak in error path + +On error, vchiq_mmal_component_init could leave the +event context allocated for ports. +Clean them up in the error path. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/vchiq-mmal/mmal-vchiq.c | 27 +++++++++++++------ + 1 file changed, 19 insertions(+), 8 deletions(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -1848,9 +1848,26 @@ static void free_event_context(struct vc + { + struct mmal_msg_context *ctx = port->event_context; + ++ if (!ctx) ++ return; ++ + kfree(ctx->u.bulk.buffer->buffer); + kfree(ctx->u.bulk.buffer); + release_msg_context(ctx); ++ port->event_context = NULL; ++} ++ ++static void release_all_event_contexts(struct vchiq_mmal_component *component) ++{ ++ int idx; ++ ++ for (idx = 0; idx < component->inputs; idx++) ++ free_event_context(&component->input[idx]); ++ for (idx = 0; idx < component->outputs; idx++) ++ free_event_context(&component->output[idx]); ++ for (idx = 0; idx < component->clocks; idx++) ++ free_event_context(&component->clock[idx]); ++ free_event_context(&component->control); + } + + /* Initialise a mmal component and its ports +@@ -1948,6 +1965,7 @@ int vchiq_mmal_component_init(struct vch + + release_component: + destroy_component(instance, component); ++ release_all_event_contexts(component); + unlock: + if (component) + component->in_use = 0; +@@ -1975,14 +1993,7 @@ int vchiq_mmal_component_finalise(struct + + component->in_use = 0; + +- for (idx = 0; idx < component->inputs; idx++) +- free_event_context(&component->input[idx]); +- for (idx = 0; idx < component->outputs; idx++) +- free_event_context(&component->output[idx]); +- for (idx = 0; idx < component->clocks; idx++) +- free_event_context(&component->clock[idx]); +- +- free_event_context(&component->control); ++ release_all_event_contexts(component); + + mutex_unlock(&instance->vchiq_mutex); + diff --git a/target/linux/brcm2708/patches-4.19/950-0442-staging-bcm2835-audio-Fix-incorrect-draining-handlin.patch b/target/linux/brcm2708/patches-4.19/950-0442-staging-bcm2835-audio-Fix-incorrect-draining-handlin.patch deleted file mode 100644 index ab305096aa..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0442-staging-bcm2835-audio-Fix-incorrect-draining-handlin.patch +++ /dev/null @@ -1,69 +0,0 @@ -From e5414b543a330c64b2e0b5e96d604cf580c2b9b7 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:38 +0200 -Subject: [PATCH 442/806] staging: bcm2835-audio: Fix incorrect draining - handling - -commit 7d2a91f5f1bcf08ca257bcf1ed9721fcd341f834 upstream. - -The handling of SNDRV_PCM_TRIGGER_STOP at the trigger callback is -incorrect: when the STOP is issued, the driver is supposed to drop the -stream immediately. Meanwhile bcm2835 driver checks the DRAINING -state and tries to issue some different command. - -This patch straightens things a bit, dropping the incorrect state -checks. The draining behavior would be still not perfect at this -point, but will be improved in a later patch. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 18 ++++++------------ - 1 file changed, 6 insertions(+), 12 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -153,7 +153,6 @@ static int snd_bcm2835_playback_open_gen - chip->alsa_stream[idx] = alsa_stream; - - chip->opened |= (1 << idx); -- alsa_stream->draining = 1; - - out: - mutex_unlock(&chip->audio_mutex); -@@ -268,6 +267,7 @@ static int snd_bcm2835_pcm_prepare(struc - alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); - alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); - alsa_stream->pos = 0; -+ alsa_stream->draining = false; - - audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", - alsa_stream->buffer_size, alsa_stream->period_size, -@@ -312,21 +312,15 @@ static int snd_bcm2835_pcm_trigger(struc - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - err = bcm2835_audio_start(alsa_stream); -- if (!err) -- alsa_stream->draining = 1; -- else -+ if (err) - audio_error(" Failed to START alsa device (%d)\n", err); - break; -+ case SNDRV_PCM_TRIGGER_DRAIN: -+ alsa_stream->draining = true; -+ break; - case SNDRV_PCM_TRIGGER_STOP: -- if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) { -- audio_info("DRAINING\n"); -- alsa_stream->draining = 1; -- } else { -- audio_info("DROPPING\n"); -- alsa_stream->draining = 0; -- } - err = bcm2835_audio_stop(alsa_stream); -- if (err != 0) -+ if (err) - audio_error(" Failed to STOP alsa device (%d)\n", err); - break; - default: diff --git a/target/linux/brcm2708/patches-4.19/950-0442-staging-vchiq-mmal-Fix-memory-leak-of-vchiq-instance.patch b/target/linux/brcm2708/patches-4.19/950-0442-staging-vchiq-mmal-Fix-memory-leak-of-vchiq-instance.patch new file mode 100644 index 0000000000..f761ad7872 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0442-staging-vchiq-mmal-Fix-memory-leak-of-vchiq-instance.patch @@ -0,0 +1,62 @@ +From 3e246d402582c6f19e5e636f89952d11e18e6442 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 3 May 2019 13:27:51 +0100 +Subject: [PATCH] staging: vchiq-mmal: Fix memory leak of vchiq + instance + +The vchiq instance was allocated from vchiq_mmal_init via +vchi_initialise, but was never released with vchi_disconnect. + +Retain the handle and release it from vchiq_mmal_finalise. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c +@@ -176,6 +176,7 @@ struct mmal_msg_context { + }; + + struct vchiq_mmal_instance { ++ VCHI_INSTANCE_T vchi_instance; + VCHI_SERVICE_HANDLE_T handle; + + /* ensure serialised access to service */ +@@ -1981,7 +1982,7 @@ EXPORT_SYMBOL_GPL(vchiq_mmal_component_i + int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, + struct vchiq_mmal_component *component) + { +- int ret, idx; ++ int ret; + + if (mutex_lock_interruptible(&instance->vchiq_mutex)) + return -EINTR; +@@ -2094,6 +2095,8 @@ int vchiq_mmal_finalise(struct vchiq_mma + + idr_destroy(&instance->context_map); + ++ vchi_disconnect(instance->vchi_instance); ++ + kfree(instance); + + return status; +@@ -2105,7 +2108,7 @@ int vchiq_mmal_init(struct vchiq_mmal_in + int status; + struct vchiq_mmal_instance *instance; + static VCHI_CONNECTION_T *vchi_connection; +- static VCHI_INSTANCE_T vchi_instance; ++ VCHI_INSTANCE_T vchi_instance; + SERVICE_CREATION_T params = { + .version = VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER), + .service_id = VC_MMAL_SERVER_NAME, +@@ -2151,6 +2154,8 @@ int vchiq_mmal_init(struct vchiq_mmal_in + if (!instance) + return -ENOMEM; + ++ instance->vchi_instance = vchi_instance; ++ + mutex_init(&instance->vchiq_mutex); + + instance->bulk_scratch = vmalloc(PAGE_SIZE); diff --git a/target/linux/brcm2708/patches-4.19/950-0443-Revert-video-bcm2708_fb-Try-allocating-on-the-ARM-an.patch b/target/linux/brcm2708/patches-4.19/950-0443-Revert-video-bcm2708_fb-Try-allocating-on-the-ARM-an.patch new file mode 100644 index 0000000000..2ad3299595 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0443-Revert-video-bcm2708_fb-Try-allocating-on-the-ARM-an.patch @@ -0,0 +1,164 @@ +From 71a27bf49d7a64959b7e60d780a1f899ead34f5f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 13 May 2019 17:34:29 +0100 +Subject: [PATCH] Revert "video: bcm2708_fb: Try allocating on the ARM + and passing to VPU" + +This reverts commit ca36c709fce57e8023d2b8b354376bf161601a49. + +The driver tries a cma_alloc to avoid using gpu_mem, but should +that fail the core code is logging an error with no easy way to +test whether it will succeed or fail first. + +Revert until we either totally give up on gpu_mem and increase +CMA always, or find a way to try an allocation. + +Signed-off-by: Dave Stevenson +--- + drivers/video/fbdev/bcm2708_fb.c | 102 +++------------------ + include/soc/bcm2835/raspberrypi-firmware.h | 1 - + 2 files changed, 12 insertions(+), 91 deletions(-) + +--- a/drivers/video/fbdev/bcm2708_fb.c ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -98,11 +98,6 @@ struct bcm2708_fb { + struct bcm2708_fb_stats stats; + unsigned long fb_bus_address; + struct { u32 base, length; } gpu; +- +- bool disable_arm_alloc; +- unsigned int image_size; +- dma_addr_t dma_addr; +- void *cpuaddr; + }; + + #define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) +@@ -288,88 +283,23 @@ static int bcm2708_fb_set_par(struct fb_ + .xoffset = info->var.xoffset, + .yoffset = info->var.yoffset, + .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, +- /* base and screen_size will be initialised later */ +- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, +- /* pitch will be initialised later */ ++ .base = 0, ++ .screen_size = 0, ++ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, ++ .pitch = 0, + }; +- int ret, image_size; +- ++ int ret; + + print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", __func__, info, + info->var.xres, info->var.yres, info->var.xres_virtual, + info->var.yres_virtual, (int)info->screen_size, + info->var.bits_per_pixel); + +- /* Try allocating our own buffer. We can specify all the parameters */ +- image_size = ((info->var.xres * info->var.yres) * +- info->var.bits_per_pixel) >> 3; +- +- if (!fb->disable_arm_alloc && +- (image_size != fb->image_size || !fb->dma_addr)) { +- if (fb->dma_addr) { +- dma_free_coherent(info->device, fb->image_size, +- fb->cpuaddr, fb->dma_addr); +- fb->image_size = 0; +- fb->cpuaddr = NULL; +- fb->dma_addr = 0; +- } +- +- fb->cpuaddr = dma_alloc_coherent(info->device, image_size, +- &fb->dma_addr, GFP_KERNEL); +- +- if (!fb->cpuaddr) { +- fb->dma_addr = 0; +- fb->disable_arm_alloc = true; +- } else { +- fb->image_size = image_size; +- } +- } +- +- if (fb->cpuaddr) { +- fbinfo.base = fb->dma_addr; +- fbinfo.screen_size = image_size; +- fbinfo.pitch = (info->var.xres * info->var.bits_per_pixel) >> 3; +- +- ret = rpi_firmware_property_list(fb->fw, &fbinfo, +- sizeof(fbinfo)); +- if (ret || fbinfo.base != fb->dma_addr) { +- /* Firmware either failed, or assigned a different base +- * address (ie it doesn't support being passed an FB +- * allocation). +- * Destroy the allocation, and don't try again. +- */ +- dma_free_coherent(info->device, fb->image_size, +- fb->cpuaddr, fb->dma_addr); +- fb->image_size = 0; +- fb->cpuaddr = NULL; +- fb->dma_addr = 0; +- fb->disable_arm_alloc = true; +- } +- } else { +- /* Our allocation failed - drop into the old scheme of +- * allocation by the VPU. +- */ +- ret = -ENOMEM; +- } +- ++ ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); + if (ret) { +- /* Old scheme: +- * - FRAMEBUFFER_ALLOCATE passes 0 for base and screen_size. +- * - GET_PITCH instead of SET_PITCH. +- */ +- fbinfo.base = 0; +- fbinfo.screen_size = 0; +- fbinfo.tag6.tag = RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH; +- fbinfo.pitch = 0; +- +- ret = rpi_firmware_property_list(fb->fw, &fbinfo, +- sizeof(fbinfo)); +- if (ret) { +- dev_err(info->device, +- "Failed to allocate GPU framebuffer (%d)\n", +- ret); +- return ret; +- } ++ dev_err(info->device, ++ "Failed to allocate GPU framebuffer (%d)\n", ret); ++ return ret; + } + + if (info->var.bits_per_pixel <= 8) +@@ -384,17 +314,9 @@ static int bcm2708_fb_set_par(struct fb_ + fb->fb.fix.smem_start = fbinfo.base; + fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; + fb->fb.screen_size = fbinfo.screen_size; +- +- if (!fb->dma_addr) { +- if (fb->fb.screen_base) +- iounmap(fb->fb.screen_base); +- +- fb->fb.screen_base = ioremap_wc(fbinfo.base, +- fb->fb.screen_size); +- } else { +- fb->fb.screen_base = fb->cpuaddr; +- } +- ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); + if (!fb->fb.screen_base) { + /* the console may currently be locked */ + console_trylock(); +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -128,7 +128,6 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, + RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, + RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, +- RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, diff --git a/target/linux/brcm2708/patches-4.19/950-0443-staging-bcm2835-audio-Kill-unused-spinlock.patch b/target/linux/brcm2708/patches-4.19/950-0443-staging-bcm2835-audio-Kill-unused-spinlock.patch deleted file mode 100644 index bdd8f2aa98..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0443-staging-bcm2835-audio-Kill-unused-spinlock.patch +++ /dev/null @@ -1,39 +0,0 @@ -From d9aef1329c29c20d8e0db9929a3235bfb1d718d3 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:39 +0200 -Subject: [PATCH 443/806] staging: bcm2835-audio: Kill unused spinlock - -commit 5332f6f012c0bf3a45c77dbc0f79814443a884d4 upstream. - -The alsa_stream->lock is never used. Kill it. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 -- - drivers/staging/vc04_services/bcm2835-audio/bcm2835.h | 2 -- - 2 files changed, 4 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -128,8 +128,6 @@ static int snd_bcm2835_playback_open_gen - alsa_stream->substream = substream; - alsa_stream->idx = idx; - -- spin_lock_init(&alsa_stream->lock); -- - err = bcm2835_audio_open(alsa_stream); - if (err) { - kfree(alsa_stream); ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -119,8 +119,6 @@ struct bcm2835_alsa_stream { - struct snd_pcm_substream *substream; - struct snd_pcm_indirect pcm_indirect; - -- spinlock_t lock; -- - int draining; - - int channels; diff --git a/target/linux/brcm2708/patches-4.19/950-0444-Added-IQaudIO-Pi-Codec-board-support-2969.patch b/target/linux/brcm2708/patches-4.19/950-0444-Added-IQaudIO-Pi-Codec-board-support-2969.patch new file mode 100644 index 0000000000..b063e38854 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0444-Added-IQaudIO-Pi-Codec-board-support-2969.patch @@ -0,0 +1,376 @@ +From 930c49de8674acda0f143f7bc182ed2fad8c4f9d Mon Sep 17 00:00:00 2001 +From: IQaudIO +Date: Mon, 13 May 2019 21:53:05 +0100 +Subject: [PATCH] Added IQaudIO Pi-Codec board support (#2969) + +Add support for the IQaudIO Pi-Codec board. + +Signed-off-by: Gordon +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 + + .../dts/overlays/iqaudio-codec-overlay.dts | 42 +++ + sound/soc/bcm/Kconfig | 7 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/iqaudio-codec.c | 250 ++++++++++++++++++ + 9 files changed, 311 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts + create mode 100644 sound/soc/bcm/iqaudio-codec.c + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -68,6 +68,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + i2c1-bcm2708.dtbo \ + i2s-gpio28-31.dtbo \ + ilitek251x.dtbo \ ++ iqaudio-codec.dtbo \ + iqaudio-dac.dtbo \ + iqaudio-dacplus.dtbo \ + iqaudio-digi-wm8804-audio.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1160,6 +1160,12 @@ Params: interrupt GPIO use + touchscreen (in pixels) + + ++Name: iqaudio-codec ++Info: Configures the IQaudio Codec audio card ++Load: dtoverlay=iqaudio-codec ++Params: ++ ++ + Name: iqaudio-dac + Info: Configures the IQaudio DAC audio card + Load: dtoverlay=iqaudio-dac, +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts +@@ -0,0 +1,42 @@ ++// Definitions for IQaudIO CODEC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ da2713@1a { ++ #sound-dai-cells = <0>; ++ compatible = "dlg,da7213"; ++ reg = <0x1a>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ iqaudio_dac: __overlay__ { ++ compatible = "iqaudio,iqaudio-codec"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ }; ++}; +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -108,6 +108,13 @@ config SND_BCM2708_SOC_JUSTBOOM_DIGI + help + Say Y or M if you want to add support for JustBoom Digi. + ++config SND_BCM2708_SOC_IQAUDIO_CODEC ++ tristate "Support for IQaudIO-CODEC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_DA7213 ++ help ++ Say Y or M if you want to add support for IQaudIO-CODEC. ++ + config SND_BCM2708_SOC_IQAUDIO_DAC + tristate "Support for IQaudIO-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -18,6 +18,7 @@ snd-soc-hifiberry-dacplusadc-objs := hif + snd-soc-justboom-dac-objs := justboom-dac.o + snd-soc-rpi-cirrus-objs := rpi-cirrus.o + snd-soc-rpi-proto-objs := rpi-proto.o ++snd-soc-iqaudio-codec-objs := iqaudio-codec.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o +@@ -42,6 +43,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D + obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o ++obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_CODEC) += snd-soc-iqaudio-codec.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o +--- /dev/null ++++ b/sound/soc/bcm/iqaudio-codec.c +@@ -0,0 +1,250 @@ ++/* ++ * ASoC Driver for IQaudIO Raspberry Pi Codec board ++ * ++ * Author: Gordon Garrity ++ * (C) Copyright IQaudio Limited, 2017-2019 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "../codecs/da7213.h" ++ ++static int pll_out = DA7213_PLL_FREQ_OUT_90316800; ++ ++static int snd_rpi_iqaudio_pll_control(struct snd_soc_dapm_widget *w, ++ struct snd_kcontrol *k, int event) ++{ ++ int ret = 0; ++ struct snd_soc_dapm_context *dapm = w->dapm; ++ struct snd_soc_card *card = dapm->card; ++ struct snd_soc_pcm_runtime *rtd = ++ snd_soc_get_pcm_runtime(card, card->dai_link[0].name); ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ ++ if (SND_SOC_DAPM_EVENT_OFF(event)) { ++ ret = snd_soc_dai_set_pll(codec_dai, 0, DA7213_SYSCLK_MCLK, 0, ++ 0); ++ if (ret) ++ dev_err(card->dev, "Failed to bypass PLL: %d\n", ret); ++ } else if (SND_SOC_DAPM_EVENT_ON(event)) { ++ ret = snd_soc_dai_set_pll(codec_dai, 0, DA7213_SYSCLK_PLL, 0, ++ pll_out); ++ if (ret) ++ dev_err(card->dev, "Failed to enable PLL: %d\n", ret); ++ } ++ ++ return ret; ++} ++ ++static int snd_rpi_iqaudio_post_dapm_event(struct snd_soc_dapm_widget *w, ++ struct snd_kcontrol *kcontrol, ++ int event) ++{ ++ switch (event) { ++ case SND_SOC_DAPM_POST_PMU: ++ /* Delay for mic bias ramp */ ++ msleep(1000); ++ break; ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ ++static const struct snd_soc_dapm_widget dapm_widgets[] = { ++ SND_SOC_DAPM_HP("HP Jack", NULL), ++ SND_SOC_DAPM_MIC("MIC Jack", NULL), ++ SND_SOC_DAPM_MIC("Onboard MIC", NULL), ++ SND_SOC_DAPM_LINE("AUX Jack", NULL), ++ SND_SOC_DAPM_SUPPLY("PLL Control", SND_SOC_NOPM, 0, 0, ++ snd_rpi_iqaudio_pll_control, ++ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), ++ SND_SOC_DAPM_POST("Post Power Up Event", snd_rpi_iqaudio_post_dapm_event), ++}; ++ ++static const struct snd_soc_dapm_route audio_map[] = { ++ {"HP Jack", NULL, "HPL"}, ++ {"HP Jack", NULL, "HPR"}, ++ {"HP Jack", NULL, "PLL Control"}, ++ ++ {"AUX Jack", NULL, "AUXR"}, ++ {"AUX Jack", NULL, "AUXL"}, ++ {"AUX Jack", NULL, "PLL Control"}, ++ ++ /* Assume Mic1 is linked to Headset and Mic2 to on-board mic */ ++ {"MIC Jack", NULL, "MIC1"}, ++ {"MIC Jack", NULL, "PLL Control"}, ++ {"Onboard MIC", NULL, "MIC2"}, ++ {"Onboard MIC", NULL, "PLL Control"}, ++}; ++ ++/* machine stream operations */ ++ ++static int snd_rpi_iqaudio_codec_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ int ret; ++ ++ /* Set bclk ratio to align with codec's BCLK rate */ ++ ret = snd_soc_dai_set_bclk_ratio(cpu_dai, 64); ++ if (ret) { ++ dev_err(rtd->dev, "Failed to set CPU BLCK ratio\n"); ++ return ret; ++ } ++ ++ /* Set MCLK frequency to codec, onboard 11.2896MHz clock */ ++ return snd_soc_dai_set_sysclk(codec_dai, DA7213_CLKSRC_MCLK, 11289600, ++ SND_SOC_CLOCK_OUT); ++} ++ ++static int snd_rpi_iqaudio_codec_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ unsigned int samplerate = params_rate(params); ++ ++ switch (samplerate) { ++ case 8000: ++ case 16000: ++ case 32000: ++ case 48000: ++ case 96000: ++ pll_out = DA7213_PLL_FREQ_OUT_98304000; ++ return 0; ++ case 44100: ++ case 88200: ++ pll_out = DA7213_PLL_FREQ_OUT_90316800; ++ return 0; ++ default: ++ dev_err(rtd->dev,"Unsupported samplerate %d\n", samplerate); ++ return -EINVAL; ++ } ++} ++ ++static const struct snd_soc_ops snd_rpi_iqaudio_codec_ops = { ++ .hw_params = snd_rpi_iqaudio_codec_hw_params, ++}; ++ ++ ++static struct snd_soc_dai_link snd_rpi_iqaudio_codec_dai[] = { ++{ ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "da7213-hifi", ++ .platform_name = "bmc2708-i2s.0", ++ .codec_name = "da7213.1-001a", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .init = snd_rpi_iqaudio_codec_init, ++ .ops = &snd_rpi_iqaudio_codec_ops, ++ .symmetric_rates = 1, ++ .symmetric_channels = 1, ++ .symmetric_samplebits = 1, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_iqaudio_codec = { ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_iqaudio_codec_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_codec_dai), ++ .dapm_widgets = dapm_widgets, ++ .num_dapm_widgets = ARRAY_SIZE(dapm_widgets), ++ .dapm_routes = audio_map, ++ .num_dapm_routes = ARRAY_SIZE(audio_map), ++}; ++ ++static int snd_rpi_iqaudio_codec_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_iqaudio_codec.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_card *card = &snd_rpi_iqaudio_codec; ++ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_codec_dai[0]; ++ ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ if (of_property_read_string(pdev->dev.of_node, "card_name", ++ &card->name)) ++ card->name = "IQaudIOCODEC"; ++ ++ if (of_property_read_string(pdev->dev.of_node, "dai_name", ++ &dai->name)) ++ dai->name = "IQaudIO CODEC"; ++ ++ if (of_property_read_string(pdev->dev.of_node, ++ "dai_stream_name", &dai->stream_name)) ++ dai->stream_name = "IQaudIO CODEC HiFi v1.1"; ++ ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_iqaudio_codec); ++ if (ret) { ++ if (ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_iqaudio_codec_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_iqaudio_codec); ++} ++ ++static const struct of_device_id iqaudio_of_match[] = { ++ { .compatible = "iqaudio,iqaudio-codec", }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, iqaudio_of_match); ++ ++static struct platform_driver snd_rpi_iqaudio_codec_driver = { ++ .driver = { ++ .name = "snd-rpi-iqaudio-codec", ++ .owner = THIS_MODULE, ++ .of_match_table = iqaudio_of_match, ++ }, ++ .probe = snd_rpi_iqaudio_codec_probe, ++ .remove = snd_rpi_iqaudio_codec_remove, ++}; ++ ++ ++ ++module_platform_driver(snd_rpi_iqaudio_codec_driver); ++ ++MODULE_AUTHOR("Gordon Garrity "); ++MODULE_DESCRIPTION("ASoC Driver for IQaudIO CODEC"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.19/950-0444-staging-bcm2835-audio-Use-PCM-runtime-values-instead.patch b/target/linux/brcm2708/patches-4.19/950-0444-staging-bcm2835-audio-Use-PCM-runtime-values-instead.patch deleted file mode 100644 index 2912998f6a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0444-staging-bcm2835-audio-Use-PCM-runtime-values-instead.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 4efb059f297f8234bc188b6bc1e4af673ce9f9e3 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:40 +0200 -Subject: [PATCH 444/806] staging: bcm2835-audio: Use PCM runtime values - instead - -commit b8f7fdd50890b848e085c0519469aed4ff4d9b54 upstream. - -Some fields in alsa_stream are the values we keep already in PCM -runtime object, hence they are redundant. Use the standard PCM -runtime values instead of the private copies. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 23 ++++--------------- - .../vc04_services/bcm2835-audio/bcm2835.h | 4 ---- - 2 files changed, 4 insertions(+), 23 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -206,22 +206,7 @@ static int snd_bcm2835_playback_close(st - static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) - { -- struct snd_pcm_runtime *runtime = substream->runtime; -- struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; -- int err; -- -- err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); -- if (err < 0) { -- audio_error -- (" pcm_lib_malloc failed to allocated pages for buffers\n"); -- return err; -- } -- -- alsa_stream->channels = params_channels(params); -- alsa_stream->params_rate = params_rate(params); -- alsa_stream->pcm_format_width = snd_pcm_format_width(params_format(params)); -- -- return err; -+ return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); - } - - /* hw_free callback */ -@@ -248,11 +233,11 @@ static int snd_bcm2835_pcm_prepare(struc - if (chip->spdif_status & IEC958_AES0_NONAUDIO) - channels = 0; - else -- channels = alsa_stream->channels; -+ channels = runtime->channels; - - err = bcm2835_audio_set_params(alsa_stream, channels, -- alsa_stream->params_rate, -- alsa_stream->pcm_format_width); -+ runtime->rate, -+ snd_pcm_format_width(runtime->format)); - if (err < 0) - audio_error(" error setting hw params\n"); - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -121,10 +121,6 @@ struct bcm2835_alsa_stream { - - int draining; - -- int channels; -- int params_rate; -- int pcm_format_width; -- - unsigned int pos; - unsigned int buffer_size; - unsigned int period_size; diff --git a/target/linux/brcm2708/patches-4.19/950-0445-Revert-smsc95xx-dynamically-fix-up-TX-buffer-alignme.patch b/target/linux/brcm2708/patches-4.19/950-0445-Revert-smsc95xx-dynamically-fix-up-TX-buffer-alignme.patch new file mode 100644 index 0000000000..8da9deaa6e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0445-Revert-smsc95xx-dynamically-fix-up-TX-buffer-alignme.patch @@ -0,0 +1,60 @@ +From 89bb75e008adf061e3e396de76020b00ea0d6123 Mon Sep 17 00:00:00 2001 +From: P33M +Date: Tue, 14 May 2019 14:55:19 +0100 +Subject: [PATCH] Revert "smsc95xx: dynamically fix up TX buffer + alignment with padding bytes" + +As reported in https://github.com/raspberrypi/linux/issues/2964 this +commit causes a regression corrupting non-option TCP ack packets. + +This reverts commit 96b972dc736d943f371a16ccca452a053d83c65b. +--- + drivers/net/usb/smsc95xx.c | 12 +++++------- + drivers/net/usb/smsc95xx.h | 2 +- + 2 files changed, 6 insertions(+), 8 deletions(-) + +--- a/drivers/net/usb/smsc95xx.c ++++ b/drivers/net/usb/smsc95xx.c +@@ -2082,9 +2082,7 @@ static struct sk_buff *smsc95xx_tx_fixup + struct sk_buff *skb, gfp_t flags) + { + bool csum = skb->ip_summed == CHECKSUM_PARTIAL; +- unsigned int align_bytes = -((uintptr_t)skb->data) & 0x3; +- int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM + align_bytes +- : SMSC95XX_TX_OVERHEAD + align_bytes; ++ int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD; + u32 tx_cmd_a, tx_cmd_b; + + /* We do not advertise SG, so skbs should be already linearized */ +@@ -2118,16 +2116,16 @@ static struct sk_buff *smsc95xx_tx_fixup + } + } + +- skb_push(skb, 4 + align_bytes); +- tx_cmd_b = (u32)(skb->len - 4 - align_bytes); ++ skb_push(skb, 4); ++ tx_cmd_b = (u32)(skb->len - 4); + if (csum) + tx_cmd_b |= TX_CMD_B_CSUM_ENABLE; + cpu_to_le32s(&tx_cmd_b); + memcpy(skb->data, &tx_cmd_b, 4); + + skb_push(skb, 4); +- tx_cmd_a = (u32)(skb->len - 8 - align_bytes) | TX_CMD_A_FIRST_SEG_ | +- (align_bytes << 16) | TX_CMD_A_LAST_SEG_; ++ tx_cmd_a = (u32)(skb->len - 8) | TX_CMD_A_FIRST_SEG_ | ++ TX_CMD_A_LAST_SEG_; + cpu_to_le32s(&tx_cmd_a); + memcpy(skb->data, &tx_cmd_a, 4); + +--- a/drivers/net/usb/smsc95xx.h ++++ b/drivers/net/usb/smsc95xx.h +@@ -21,7 +21,7 @@ + #define _SMSC95XX_H + + /* Tx command words */ +-#define TX_CMD_A_DATA_OFFSET_ (0x00030000) /* Data Start Offset */ ++#define TX_CMD_A_DATA_OFFSET_ (0x001F0000) /* Data Start Offset */ + #define TX_CMD_A_FIRST_SEG_ (0x00002000) /* First Segment */ + #define TX_CMD_A_LAST_SEG_ (0x00001000) /* Last Segment */ + #define TX_CMD_A_BUF_SIZE_ (0x000007FF) /* Buffer Size */ diff --git a/target/linux/brcm2708/patches-4.19/950-0445-staging-bcm2835-audio-Drop-unnecessary-pcm-indirect-.patch b/target/linux/brcm2708/patches-4.19/950-0445-staging-bcm2835-audio-Drop-unnecessary-pcm-indirect-.patch deleted file mode 100644 index 8ae584c0af..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0445-staging-bcm2835-audio-Drop-unnecessary-pcm-indirect-.patch +++ /dev/null @@ -1,29 +0,0 @@ -From a08260154f88b0b97e3c8de6b3cdb7187e8c3d8a Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:41 +0200 -Subject: [PATCH 445/806] staging: bcm2835-audio: Drop unnecessary pcm indirect - setup - -commit 7318ec896f4856fae2bb013858e422fa078201e1 upstream. - -The hw_queue_size of PCM indirect helper doesn't need to be set up if -you use the whole given buffer size. Drop the useless -initialization, which just confuses readers. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -280,7 +280,6 @@ static int snd_bcm2835_pcm_ack(struct sn - struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; - struct snd_pcm_indirect *pcm_indirect = &alsa_stream->pcm_indirect; - -- pcm_indirect->hw_queue_size = runtime->hw.buffer_bytes_max; - return snd_pcm_indirect_playback_transfer(substream, pcm_indirect, - snd_bcm2835_pcm_transfer); - } diff --git a/target/linux/brcm2708/patches-4.19/950-0446-staging-bcm2835-audio-Drop-useless-NULL-check.patch b/target/linux/brcm2708/patches-4.19/950-0446-staging-bcm2835-audio-Drop-useless-NULL-check.patch deleted file mode 100644 index 5c00d52f16..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0446-staging-bcm2835-audio-Drop-useless-NULL-check.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 9f3956e7bbf868894b5aee41110dbe28f117918c Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:42 +0200 -Subject: [PATCH 446/806] staging: bcm2835-audio: Drop useless NULL check - -commit 8bcf9f252c29c2d5bcce3db605c0ebf1ef230f9c upstream. - -alsa_stream->chip can be never NULL. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -188,8 +188,7 @@ static int snd_bcm2835_playback_close(st - alsa_stream->buffer_size = 0; - - bcm2835_audio_close(alsa_stream); -- if (alsa_stream->chip) -- alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; -+ alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; - /* - * Do not free up alsa_stream here, it will be freed up by - * runtime->private_free callback we registered in *_open above diff --git a/target/linux/brcm2708/patches-4.19/950-0446-w1-ds2408-reset-on-output_write-retry-with-readback.patch b/target/linux/brcm2708/patches-4.19/950-0446-w1-ds2408-reset-on-output_write-retry-with-readback.patch new file mode 100644 index 0000000000..afdc22e2d1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0446-w1-ds2408-reset-on-output_write-retry-with-readback.patch @@ -0,0 +1,140 @@ +From 714580d7c11f81afb5e08c71f79a03a1ed4ae44e Mon Sep 17 00:00:00 2001 +From: Jean-Francois Dagenais +Date: Thu, 28 Mar 2019 12:41:11 -0400 +Subject: [PATCH] w1: ds2408: reset on output_write retry with readback + +commit 49695ac46861180baf2b2b92c62da8619b6bf28f upstream. + +When we have success in 'Channel Access Write' but reading back latch +states fails, a write is retried without doing a proper slave reset. +This leads to protocol errors as the slave treats the next 'Channel +Access Write' as the continuation of previous command. + +This commit is fixing this by making sure if the retry loop re-runs, a +reset is performed, whatever the failure (CONFIRM_BYTE or the read +back). + +The loop was quite due for a cleanup and this change mandated it. By +isolating the CONFIG_W1_SLAVE_DS2408_READBACK case into it's own +function, we vastly reduce the visual and branching(runtime and +compile-time) noise. + +Reported-by: Mariusz Bialonczyk +Tested-by: Mariusz Bialonczyk +Signed-off-by: Jean-Francois Dagenais +Signed-off-by: Greg Kroah-Hartman +--- + drivers/w1/slaves/w1_ds2408.c | 76 ++++++++++++++++++----------------- + 1 file changed, 39 insertions(+), 37 deletions(-) + +--- a/drivers/w1/slaves/w1_ds2408.c ++++ b/drivers/w1/slaves/w1_ds2408.c +@@ -138,14 +138,37 @@ static ssize_t status_control_read(struc + W1_F29_REG_CONTROL_AND_STATUS, buf); + } + ++#ifdef fCONFIG_W1_SLAVE_DS2408_READBACK ++static bool optional_read_back_valid(struct w1_slave *sl, u8 expected) ++{ ++ u8 w1_buf[3]; ++ ++ if (w1_reset_resume_command(sl->master)) ++ return false; ++ ++ w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS; ++ w1_buf[1] = W1_F29_REG_OUTPUT_LATCH_STATE; ++ w1_buf[2] = 0; ++ ++ w1_write_block(sl->master, w1_buf, 3); ++ ++ return (w1_read_8(sl->master) == expected); ++} ++#else ++static bool optional_read_back_valid(struct w1_slave *sl, u8 expected) ++{ ++ return true; ++} ++#endif ++ + static ssize_t output_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) + { + struct w1_slave *sl = kobj_to_w1_slave(kobj); + u8 w1_buf[3]; +- u8 readBack; + unsigned int retries = W1_F29_RETRIES; ++ ssize_t bytes_written = -EIO; + + if (count != 1 || off != 0) + return -EFAULT; +@@ -155,54 +178,33 @@ static ssize_t output_write(struct file + dev_dbg(&sl->dev, "mutex locked"); + + if (w1_reset_select_slave(sl)) +- goto error; ++ goto out; + +- while (retries--) { ++ do { + w1_buf[0] = W1_F29_FUNC_CHANN_ACCESS_WRITE; + w1_buf[1] = *buf; + w1_buf[2] = ~(*buf); +- w1_write_block(sl->master, w1_buf, 3); + +- readBack = w1_read_8(sl->master); ++ w1_write_block(sl->master, w1_buf, 3); + +- if (readBack != W1_F29_SUCCESS_CONFIRM_BYTE) { +- if (w1_reset_resume_command(sl->master)) +- goto error; +- /* try again, the slave is ready for a command */ +- continue; ++ if (w1_read_8(sl->master) == W1_F29_SUCCESS_CONFIRM_BYTE && ++ optional_read_back_valid(sl, *buf)) { ++ bytes_written = 1; ++ goto out; + } + +-#ifdef CONFIG_W1_SLAVE_DS2408_READBACK +- /* here the master could read another byte which +- would be the PIO reg (the actual pin logic state) +- since in this driver we don't know which pins are +- in and outs, there's no value to read the state and +- compare. with (*buf) so end this command abruptly: */ + if (w1_reset_resume_command(sl->master)) +- goto error; ++ goto out; /* unrecoverable error */ ++ /* try again, the slave is ready for a command */ ++ } while (--retries); + +- /* go read back the output latches */ +- /* (the direct effect of the write above) */ +- w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS; +- w1_buf[1] = W1_F29_REG_OUTPUT_LATCH_STATE; +- w1_buf[2] = 0; +- w1_write_block(sl->master, w1_buf, 3); +- /* read the result of the READ_PIO_REGS command */ +- if (w1_read_8(sl->master) == *buf) +-#endif +- { +- /* success! */ +- mutex_unlock(&sl->master->bus_mutex); +- dev_dbg(&sl->dev, +- "mutex unlocked, retries:%d", retries); +- return 1; +- } +- } +-error: ++out: + mutex_unlock(&sl->master->bus_mutex); +- dev_dbg(&sl->dev, "mutex unlocked in error, retries:%d", retries); + +- return -EIO; ++ dev_dbg(&sl->dev, "%s, mutex unlocked retries:%d\n", ++ (bytes_written > 0) ? "succeeded" : "error", retries); ++ ++ return bytes_written; + } + + diff --git a/target/linux/brcm2708/patches-4.19/950-0447-staging-bcm2835-audio-Propagate-parameter-setup-erro.patch b/target/linux/brcm2708/patches-4.19/950-0447-staging-bcm2835-audio-Propagate-parameter-setup-erro.patch deleted file mode 100644 index 8132a5a799..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0447-staging-bcm2835-audio-Propagate-parameter-setup-erro.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 2ab24bca59da765a12f4617527e671170230bf3a Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:43 +0200 -Subject: [PATCH 447/806] staging: bcm2835-audio: Propagate parameter setup - error - -commit fee5638fe552ff8222c3a5bdcc4a34255e248d8c upstream. - -When the parameter setup fails, the driver should propagate the error -code instead of silently ignoring it. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -238,7 +238,7 @@ static int snd_bcm2835_pcm_prepare(struc - runtime->rate, - snd_pcm_format_width(runtime->format)); - if (err < 0) -- audio_error(" error setting hw params\n"); -+ goto out; - - memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); - -@@ -255,8 +255,9 @@ static int snd_bcm2835_pcm_prepare(struc - alsa_stream->buffer_size, alsa_stream->period_size, - alsa_stream->pos, runtime->frame_bits); - -+ out: - mutex_unlock(&chip->audio_mutex); -- return 0; -+ return err; - } - - static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream, diff --git a/target/linux/brcm2708/patches-4.19/950-0447-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch b/target/linux/brcm2708/patches-4.19/950-0447-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch new file mode 100644 index 0000000000..3766707063 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0447-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch @@ -0,0 +1,91 @@ +From 2bf6a79fb6555b5ebf21d03b1295e017804474c4 Mon Sep 17 00:00:00 2001 +From: Mariusz Bialonczyk +Date: Mon, 4 Mar 2019 12:23:36 +0100 +Subject: [PATCH] w1: ds2482: cosmetic fixes after 54865314f5a1 + +commit 5cb27d30fc3a281e830a2099d520b469e2b82008 upstream. + +We have a helper function ds2482_calculate_config() which is calculating +the config value, so just use it instead of passing the same variable +in all calls to this function. + +Also fixes the placement of module parameters to match with: +50fa2951bd74 (w1: Organize driver source to natural/common order) +by Andrew F. Davis + +Signed-off-by: Mariusz Bialonczyk +Cc: Andrew Worsley +Cc: Andrew F. Davis +Signed-off-by: Greg Kroah-Hartman +--- + drivers/w1/masters/ds2482.c | 18 +++++++++++------- + 1 file changed, 11 insertions(+), 7 deletions(-) + +--- a/drivers/w1/masters/ds2482.c ++++ b/drivers/w1/masters/ds2482.c +@@ -37,6 +37,11 @@ module_param_named(active_pullup, ds2482 + MODULE_PARM_DESC(active_pullup, "Active pullup (apply to all buses): " \ + "0-disable, 1-enable (default)"); + ++/* extra configurations - e.g. 1WS */ ++static int extra_config; ++module_param(extra_config, int, S_IRUGO | S_IWUSR); ++MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS"); ++ + /** + * The DS2482 registers - there are 3 registers that are addressed by a read + * pointer. The read pointer is set by the last command executed. +@@ -70,8 +75,6 @@ MODULE_PARM_DESC(active_pullup, "Active + #define DS2482_REG_CFG_PPM 0x02 /* presence pulse masking */ + #define DS2482_REG_CFG_APU 0x01 /* active pull-up */ + +-/* extra configurations - e.g. 1WS */ +-static int extra_config; + + /** + * Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only). +@@ -130,6 +133,8 @@ struct ds2482_data { + */ + static inline u8 ds2482_calculate_config(u8 conf) + { ++ conf |= extra_config; ++ + if (ds2482_active_pullup) + conf |= DS2482_REG_CFG_APU; + +@@ -405,7 +410,7 @@ static u8 ds2482_w1_reset_bus(void *data + /* If the chip did reset since detect, re-config it */ + if (err & DS2482_REG_STS_RST) + ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, +- ds2482_calculate_config(extra_config)); ++ ds2482_calculate_config(0x00)); + } + + mutex_unlock(&pdev->access_lock); +@@ -431,7 +436,8 @@ static u8 ds2482_w1_set_pullup(void *dat + ds2482_wait_1wire_idle(pdev); + /* note: it seems like both SPU and APU have to be set! */ + retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, +- ds2482_calculate_config(extra_config|DS2482_REG_CFG_SPU|DS2482_REG_CFG_APU)); ++ ds2482_calculate_config(DS2482_REG_CFG_SPU | ++ DS2482_REG_CFG_APU)); + ds2482_wait_1wire_idle(pdev); + } + +@@ -484,7 +490,7 @@ static int ds2482_probe(struct i2c_clien + + /* Set all config items to 0 (off) */ + ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, +- ds2482_calculate_config(extra_config)); ++ ds2482_calculate_config(0x00)); + + mutex_init(&data->access_lock); + +@@ -559,7 +565,5 @@ module_i2c_driver(ds2482_driver); + + MODULE_AUTHOR("Ben Gardner "); + MODULE_DESCRIPTION("DS2482 driver"); +-module_param(extra_config, int, S_IRUGO | S_IWUSR); +-MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS"); + + MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.19/950-0448-sound-pcm512x-codec-Adding-352.8kHz-samplerate-suppo.patch b/target/linux/brcm2708/patches-4.19/950-0448-sound-pcm512x-codec-Adding-352.8kHz-samplerate-suppo.patch new file mode 100644 index 0000000000..346cda887f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0448-sound-pcm512x-codec-Adding-352.8kHz-samplerate-suppo.patch @@ -0,0 +1,21 @@ +From 2c1e36e477550ea66824433c132fdff03b4ee020 Mon Sep 17 00:00:00 2001 +From: Klaus Schulz +Date: Thu, 16 May 2019 13:35:32 +0200 +Subject: [PATCH] sound: pcm512x-codec: Adding 352.8kHz samplerate + support + +--- + sound/soc/codecs/pcm512x.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/sound/soc/codecs/pcm512x.c ++++ b/sound/soc/codecs/pcm512x.c +@@ -542,7 +542,7 @@ static unsigned long pcm512x_ncp_target( + + static const u32 pcm512x_dai_rates[] = { + 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, +- 88200, 96000, 176400, 192000, 384000, ++ 88200, 96000, 176400, 192000, 352800, 384000, + }; + + static const struct snd_pcm_hw_constraint_list constraints_slave = { diff --git a/target/linux/brcm2708/patches-4.19/950-0448-staging-bcm2835-audio-Drop-debug-messages-in-bcm2835.patch b/target/linux/brcm2708/patches-4.19/950-0448-staging-bcm2835-audio-Drop-debug-messages-in-bcm2835.patch deleted file mode 100644 index ac3c922402..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0448-staging-bcm2835-audio-Drop-debug-messages-in-bcm2835.patch +++ /dev/null @@ -1,150 +0,0 @@ -From e109804fa00a139a05626c1b8ceebcfe3577fc6d Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:44 +0200 -Subject: [PATCH 448/806] staging: bcm2835-audio: Drop debug messages in - bcm2835-pcm.c - -commit 055e1c330d04df87d4730a5db837161c11ddaafc upstream. - -These debug messages worsen the code readability a lot while they give -little debuggability (which we already have via tracing, in anyway). - -Let's clean them up. This allows us to reduce the -snd_bcm2835_pcm_lib_ioctl() function to be a direct call of the -snd_pcm_lib_ioctl callback (like most other drivers do), too. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 51 +++---------------- - 1 file changed, 7 insertions(+), 44 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -44,9 +44,7 @@ static const struct snd_pcm_hardware snd - - static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime) - { -- audio_info("Freeing up alsa stream here ..\n"); - kfree(runtime->private_data); -- runtime->private_data = NULL; - } - - void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream) -@@ -99,7 +97,6 @@ static int snd_bcm2835_playback_open_gen - int err; - - mutex_lock(&chip->audio_mutex); -- audio_info("Alsa open (%d)\n", substream->number); - idx = substream->number; - - if (spdif && chip->opened) { -@@ -182,8 +179,6 @@ static int snd_bcm2835_playback_close(st - runtime = substream->runtime; - alsa_stream = runtime->private_data; - -- audio_info("Alsa close\n"); -- - alsa_stream->period_size = 0; - alsa_stream->buffer_size = 0; - -@@ -251,10 +246,6 @@ static int snd_bcm2835_pcm_prepare(struc - alsa_stream->pos = 0; - alsa_stream->draining = false; - -- audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", -- alsa_stream->buffer_size, alsa_stream->period_size, -- alsa_stream->pos, runtime->frame_bits); -- - out: - mutex_unlock(&chip->audio_mutex); - return err; -@@ -266,12 +257,8 @@ static void snd_bcm2835_pcm_transfer(str - struct snd_pcm_runtime *runtime = substream->runtime; - struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; - void *src = (void *) (substream->runtime->dma_area + rec->sw_data); -- int err; -- -- err = bcm2835_audio_write(alsa_stream, bytes, src); -- if (err) -- audio_error(" Failed to transfer to alsa device (%d)\n", err); - -+ bcm2835_audio_write(alsa_stream, bytes, src); - } - - static int snd_bcm2835_pcm_ack(struct snd_pcm_substream *substream) -@@ -289,27 +276,18 @@ static int snd_bcm2835_pcm_trigger(struc - { - struct snd_pcm_runtime *runtime = substream->runtime; - struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; -- int err = 0; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: -- err = bcm2835_audio_start(alsa_stream); -- if (err) -- audio_error(" Failed to START alsa device (%d)\n", err); -- break; -+ return bcm2835_audio_start(alsa_stream); - case SNDRV_PCM_TRIGGER_DRAIN: - alsa_stream->draining = true; -- break; -+ return 0; - case SNDRV_PCM_TRIGGER_STOP: -- err = bcm2835_audio_stop(alsa_stream); -- if (err) -- audio_error(" Failed to STOP alsa device (%d)\n", err); -- break; -+ return bcm2835_audio_stop(alsa_stream); - default: -- err = -EINVAL; -+ return -EINVAL; - } -- -- return err; - } - - /* pointer callback */ -@@ -319,31 +297,16 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s - struct snd_pcm_runtime *runtime = substream->runtime; - struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; - -- audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, -- frames_to_bytes(runtime, runtime->status->hw_ptr), -- frames_to_bytes(runtime, runtime->control->appl_ptr), -- alsa_stream->pos); -- - return snd_pcm_indirect_playback_pointer(substream, - &alsa_stream->pcm_indirect, - alsa_stream->pos); - } - --static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream, -- unsigned int cmd, void *arg) --{ -- int ret = snd_pcm_lib_ioctl(substream, cmd, arg); -- -- audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream, -- cmd, arg, arg ? *(unsigned int *)arg : 0, ret); -- return ret; --} -- - /* operators */ - static const struct snd_pcm_ops snd_bcm2835_playback_ops = { - .open = snd_bcm2835_playback_open, - .close = snd_bcm2835_playback_close, -- .ioctl = snd_bcm2835_pcm_lib_ioctl, -+ .ioctl = snd_pcm_lib_ioctl, - .hw_params = snd_bcm2835_pcm_hw_params, - .hw_free = snd_bcm2835_pcm_hw_free, - .prepare = snd_bcm2835_pcm_prepare, -@@ -355,7 +318,7 @@ static const struct snd_pcm_ops snd_bcm2 - static const struct snd_pcm_ops snd_bcm2835_playback_spdif_ops = { - .open = snd_bcm2835_playback_spdif_open, - .close = snd_bcm2835_playback_close, -- .ioctl = snd_bcm2835_pcm_lib_ioctl, -+ .ioctl = snd_pcm_lib_ioctl, - .hw_params = snd_bcm2835_pcm_hw_params, - .hw_free = snd_bcm2835_pcm_hw_free, - .prepare = snd_bcm2835_pcm_prepare, diff --git a/target/linux/brcm2708/patches-4.19/950-0449-ASoC-decommissioning-driver-for-3Dlab-Nano-soundcard.patch b/target/linux/brcm2708/patches-4.19/950-0449-ASoC-decommissioning-driver-for-3Dlab-Nano-soundcard.patch new file mode 100644 index 0000000000..97d69c695b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0449-ASoC-decommissioning-driver-for-3Dlab-Nano-soundcard.patch @@ -0,0 +1,500 @@ +From 3150326498ba9388b85e5af2c8fcfeafc46eeaad Mon Sep 17 00:00:00 2001 +From: GT +Date: Sat, 6 Apr 2019 21:16:39 +0100 +Subject: [PATCH] ASoC: decommissioning driver for 3Dlab Nano soundcard + +--- + .../overlays/3dlab-nano-player-overlay.dts | 32 -- + arch/arm/boot/dts/overlays/Makefile | 1 - + arch/arm/boot/dts/overlays/README | 6 - + sound/soc/bcm/3dlab-nano-player.c | 370 ------------------ + sound/soc/bcm/Kconfig | 6 - + sound/soc/bcm/Makefile | 6 +- + 8 files changed, 2 insertions(+), 421 deletions(-) + delete mode 100644 arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts + delete mode 100644 sound/soc/bcm/3dlab-nano-player.c + +--- a/arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts ++++ /dev/null +@@ -1,32 +0,0 @@ +-// Definitions for 3Dlab Nano Player +-/dts-v1/; +-/plugin/; +- +-/ { +- compatible = "brcm,bcm2708"; +- +- fragment@0 { +- target = <&i2s>; +- __overlay__ { +- status = "okay"; +- }; +- }; +- +- fragment@1 { +- target = <&i2c>; +- __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- nano-player@41 { +- compatible = "3dlab,nano-player"; +- reg = <0x41>; +- i2s-controller = <&i2s>; +- status = "okay"; +- }; +- }; +- }; +-}; +- +-// EOF +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -1,7 +1,6 @@ + # Overlays for the Raspberry Pi platform + + dtbo-$(CONFIG_ARCH_BCM2835) += \ +- 3dlab-nano-player.dtbo \ + adau1977-adc.dtbo \ + adau7002-simple.dtbo \ + ads1015.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -205,12 +205,6 @@ Params: + and the other i2c baudrate parameters. + + +-Name: 3dlab-nano-player +-Info: Configures the 3Dlab Nano Player +-Load: dtoverlay=3dlab-nano-player +-Params: +- +- + Name: adau1977-adc + Info: Overlay for activation of ADAU1977 ADC codec over I2C for control + and I2S for data. +--- a/sound/soc/bcm/3dlab-nano-player.c ++++ /dev/null +@@ -1,370 +0,0 @@ +-/* +- * 3Dlab Nano Player ALSA SoC Audio driver. +- * +- * Copyright (C) 2018 3Dlab. +- * +- * Author: GT +- * +- * This program is free software; you can redistribute it and/or +- * modify it under the terms of the GNU General Public License +- * version 2 as published by the Free Software Foundation. +- * +- * This program is distributed in the hope that it will be useful, but +- * WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- * General Public License for more details. +- */ +- +-#include +-#include +-#include +-#include +-#include +-#include +- +-#define NANO_ID 0x00 +-#define NANO_VER 0x01 +-#define NANO_CFG 0x02 +-#define NANO_STATUS 0x03 +-#define NANO_SPI_ADDR 0x04 +-#define NANO_SPI_DATA 0x05 +- +-#define NANO_ID_VAL 0x3D +-#define NANO_CFG_OFF 0x00 +-#define NANO_CFG_MULT1 0 +-#define NANO_CFG_MULT2 1 +-#define NANO_CFG_MULT4 2 +-#define NANO_CFG_MULT8 3 +-#define NANO_CFG_MULT16 4 +-#define NANO_CFG_CLK22 0 +-#define NANO_CFG_CLK24 BIT(3) +-#define NANO_CFG_DSD BIT(4) +-#define NANO_CFG_ENA BIT(5) +-#define NANO_CFG_BLINK BIT(6) +-#define NANO_STATUS_P1 BIT(0) +-#define NANO_STATUS_P2 BIT(1) +-#define NANO_STATUS_FLG BIT(2) +-#define NANO_STATUS_CLK BIT(3) +-#define NANO_SPI_READ 0 +-#define NANO_SPI_WRITE BIT(5) +- +-#define NANO_DAC_CTRL1 0x00 +-#define NANO_DAC_CTRL2 0x01 +-#define NANO_DAC_CTRL3 0x02 +-#define NANO_DAC_LATT 0x03 +-#define NANO_DAC_RATT 0x04 +- +-#define NANO_CTRL2_VAL 0x22 +- +-static int nano_player_spi_write(struct regmap *map, +- unsigned int reg, unsigned int val) +-{ +- /* indirect register access */ +- regmap_write(map, NANO_SPI_DATA, val); +- regmap_write(map, NANO_SPI_ADDR, reg | NANO_SPI_WRITE); +- return 0; +-} +- +-static int nano_player_ctrl_info(struct snd_kcontrol *kcontrol, +- struct snd_ctl_elem_info *uinfo) +-{ +- /* describe control element */ +- if (strstr(kcontrol->id.name, "Volume")) { +- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; +- uinfo->count = 1; +- uinfo->value.integer.min = 0; +- uinfo->value.integer.max = 100; +- } else { +- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; +- uinfo->count = 1; +- uinfo->value.integer.min = 0; +- uinfo->value.integer.max = 1; +- } +- +- return 0; +-} +- +-static int nano_player_ctrl_put(struct snd_kcontrol *kcontrol, +- struct snd_ctl_elem_value *ucontrol) +-{ +- /* program control value to hardware */ +- struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); +- struct regmap *regmap = snd_soc_card_get_drvdata(card); +- +- if (strstr(kcontrol->id.name, "Volume")) { +- unsigned int vol = ucontrol->value.integer.value[0]; +- unsigned int att = 255 - (2 * (100 - vol)); +- +- nano_player_spi_write(regmap, NANO_DAC_LATT, att); +- nano_player_spi_write(regmap, NANO_DAC_RATT, att); +- kcontrol->private_value = vol; +- } else { +- unsigned int mute = ucontrol->value.integer.value[0]; +- unsigned int reg = NANO_CTRL2_VAL | mute; +- +- nano_player_spi_write(regmap, NANO_DAC_CTRL2, reg); +- kcontrol->private_value = mute; +- } +- return 0; +-} +- +-static int nano_player_ctrl_get(struct snd_kcontrol *kcontrol, +- struct snd_ctl_elem_value *ucontrol) +-{ +- /* return last programmed value */ +- ucontrol->value.integer.value[0] = kcontrol->private_value; +- return 0; +-} +- +-#define SOC_NANO_PLAYER_CTRL(xname) \ +-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ +- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \ +- .info = nano_player_ctrl_info, \ +- .put = nano_player_ctrl_put, \ +- .get = nano_player_ctrl_get } +- +-static const struct snd_kcontrol_new nano_player_controls[] = { +- SOC_NANO_PLAYER_CTRL("Master Playback Volume"), +- SOC_NANO_PLAYER_CTRL("Master Playback Switch"), +-}; +- +-static const unsigned int nano_player_rates[] = { +- 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000, +- 705600, 768000 /* only possible with fast clocks */ +-}; +- +-static struct snd_pcm_hw_constraint_list nano_player_constraint_rates = { +- .list = nano_player_rates, +- .count = ARRAY_SIZE(nano_player_rates), +-}; +- +-static int nano_player_init(struct snd_soc_pcm_runtime *rtd) +-{ +- struct snd_soc_card *card = rtd->card; +- struct regmap *regmap = snd_soc_card_get_drvdata(card); +- struct snd_soc_pcm_stream *cpu = &rtd->cpu_dai->driver->playback; +- struct snd_soc_pcm_stream *codec = &rtd->codec_dai->driver->playback; +- unsigned int sample_bits = 32; +- unsigned int val; +- +- /* configure cpu dai */ +- cpu->formats |= SNDRV_PCM_FMTBIT_DSD_U32_LE; +- cpu->rate_max = 768000; +- +- /* configure dummy codec dai */ +- codec->rate_min = 44100; +- codec->rates = SNDRV_PCM_RATE_KNOT; +- codec->formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_DSD_U32_LE; +- +- /* configure max supported rate */ +- regmap_read(regmap, NANO_STATUS, &val); +- if (val & NANO_STATUS_CLK) { +- dev_notice(card->dev, "Board with fast clocks installed\n"); +- codec->rate_max = 768000; +- } else { +- dev_notice(card->dev, "Board with normal clocks installed\n"); +- codec->rate_max = 384000; +- } +- +- /* frame length enforced by hardware */ +- return snd_soc_dai_set_bclk_ratio(rtd->cpu_dai, sample_bits * 2); +-} +- +-static int nano_player_startup(struct snd_pcm_substream *substream) +-{ +- return snd_pcm_hw_constraint_list(substream->runtime, 0, +- SNDRV_PCM_HW_PARAM_RATE, +- &nano_player_constraint_rates); +-} +- +-static int nano_player_hw_params(struct snd_pcm_substream *substream, +- struct snd_pcm_hw_params *params) +-{ +- struct snd_soc_pcm_runtime *rtd = substream->private_data; +- struct snd_soc_card *card = rtd->card; +- struct regmap *regmap = snd_soc_card_get_drvdata(card); +- unsigned int config = NANO_CFG_ENA; +- struct snd_mask *fmt; +- +- /* configure PCM or DSD */ +- fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); +- if (snd_mask_test(fmt, SNDRV_PCM_FORMAT_DSD_U32_LE)) { +- /* embed DSD in PCM data */ +- snd_mask_none(fmt); +- snd_mask_set(fmt, SNDRV_PCM_FORMAT_S32_LE); +- /* enable DSD mode */ +- config |= NANO_CFG_DSD; +- } +- +- /* configure clocks */ +- switch (params_rate(params)) { +- case 44100: +- config |= NANO_CFG_MULT1 | NANO_CFG_CLK22; +- break; +- case 88200: +- config |= NANO_CFG_MULT2 | NANO_CFG_CLK22; +- break; +- case 176400: +- config |= NANO_CFG_MULT4 | NANO_CFG_CLK22; +- break; +- case 352800: +- config |= NANO_CFG_MULT8 | NANO_CFG_CLK22; +- break; +- case 705600: +- config |= NANO_CFG_MULT16 | NANO_CFG_CLK22; +- break; +- case 48000: +- config |= NANO_CFG_MULT1 | NANO_CFG_CLK24; +- break; +- case 96000: +- config |= NANO_CFG_MULT2 | NANO_CFG_CLK24; +- break; +- case 192000: +- config |= NANO_CFG_MULT4 | NANO_CFG_CLK24; +- break; +- case 384000: +- config |= NANO_CFG_MULT8 | NANO_CFG_CLK24; +- break; +- case 768000: +- config |= NANO_CFG_MULT16 | NANO_CFG_CLK24; +- break; +- default: +- return -EINVAL; +- } +- +- dev_dbg(card->dev, "Send CFG register 0x%02X\n", config); +- return regmap_write(regmap, NANO_CFG, config); +-} +- +-static struct snd_soc_ops nano_player_ops = { +- .startup = nano_player_startup, +- .hw_params = nano_player_hw_params, +-}; +- +-static struct snd_soc_dai_link nano_player_link = { +- .name = "3Dlab Nano Player", +- .stream_name = "3Dlab Nano Player HiFi", +- .platform_name = "bcm2708-i2s.0", +- .cpu_dai_name = "bcm2708-i2s.0", +- .codec_name = "snd-soc-dummy", +- .codec_dai_name = "snd-soc-dummy-dai", +- .dai_fmt = SND_SOC_DAIFMT_I2S | +- SND_SOC_DAIFMT_CONT | +- SND_SOC_DAIFMT_NB_NF | +- SND_SOC_DAIFMT_CBM_CFM, +- .init = nano_player_init, +- .ops = &nano_player_ops, +-}; +- +-static const struct regmap_config nano_player_regmap = { +- .reg_bits = 8, +- .val_bits = 8, +- .max_register = 128, +- .cache_type = REGCACHE_RBTREE, +-}; +- +-static int nano_player_card_probe(struct snd_soc_card *card) +-{ +- struct regmap *regmap = snd_soc_card_get_drvdata(card); +- unsigned int val; +- +- /* check hardware integrity */ +- regmap_read(regmap, NANO_ID, &val); +- if (val != NANO_ID_VAL) { +- dev_err(card->dev, "Invalid ID register 0x%02X\n", val); +- return -ENODEV; +- } +- +- /* report version to the user */ +- regmap_read(regmap, NANO_VER, &val); +- dev_notice(card->dev, "Started 3Dlab Nano Player driver (v%d)\n", val); +- +- /* enable internal audio bus and blink status LED */ +- return regmap_write(regmap, NANO_CFG, NANO_CFG_ENA | NANO_CFG_BLINK); +-} +- +-static int nano_player_card_remove(struct snd_soc_card *card) +-{ +- /* disable internal audio bus */ +- struct regmap *regmap = snd_soc_card_get_drvdata(card); +- +- return regmap_write(regmap, NANO_CFG, NANO_CFG_OFF); +-} +- +-static struct snd_soc_card nano_player_card = { +- .name = "3Dlab_Nano_Player", +- .owner = THIS_MODULE, +- .dai_link = &nano_player_link, +- .num_links = 1, +- .controls = nano_player_controls, +- .num_controls = ARRAY_SIZE(nano_player_controls), +- .probe = nano_player_card_probe, +- .remove = nano_player_card_remove, +-}; +- +-static int nano_player_i2c_probe(struct i2c_client *i2c, +- const struct i2c_device_id *id) +-{ +- struct regmap *regmap; +- int ret; +- +- regmap = devm_regmap_init_i2c(i2c, &nano_player_regmap); +- if (IS_ERR(regmap)) { +- ret = PTR_ERR(regmap); +- dev_err(&i2c->dev, "Failed to init regmap %d\n", ret); +- return ret; +- } +- +- if (i2c->dev.of_node) { +- struct snd_soc_dai_link *dai = &nano_player_link; +- struct device_node *node; +- +- /* cpu handle configured by device tree */ +- node = of_parse_phandle(i2c->dev.of_node, "i2s-controller", 0); +- if (node) { +- dai->platform_name = NULL; +- dai->platform_of_node = node; +- dai->cpu_dai_name = NULL; +- dai->cpu_of_node = node; +- } +- } +- +- nano_player_card.dev = &i2c->dev; +- snd_soc_card_set_drvdata(&nano_player_card, regmap); +- ret = devm_snd_soc_register_card(&i2c->dev, &nano_player_card); +- +- if (ret && ret != -EPROBE_DEFER) +- dev_err(&i2c->dev, "Failed to register card %d\n", ret); +- +- return ret; +-} +- +-static const struct of_device_id nano_player_of_match[] = { +- { .compatible = "3dlab,nano-player", }, +- { } +-}; +-MODULE_DEVICE_TABLE(of, nano_player_of_match); +- +-static const struct i2c_device_id nano_player_i2c_id[] = { +- { "nano-player", 0 }, +- { } +-}; +-MODULE_DEVICE_TABLE(i2c, nano_player_i2c_id); +- +-static struct i2c_driver nano_player_i2c_driver = { +- .probe = nano_player_i2c_probe, +- .id_table = nano_player_i2c_id, +- .driver = { +- .name = "nano-player", +- .owner = THIS_MODULE, +- .of_match_table = nano_player_of_match, +- }, +-}; +- +-module_i2c_driver(nano_player_i2c_driver); +- +-MODULE_DESCRIPTION("ASoC 3Dlab Nano Player driver"); +-MODULE_AUTHOR("GT "); +-MODULE_LICENSE("GPL v2"); +- +-/* EOF */ +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -17,12 +17,6 @@ config SND_SOC_CYGNUS + + If you don't know what to do here, say N. + +-config SND_BCM2708_SOC_3DLAB_NANO_PLAYER +- tristate "Support for 3Dlab Nano Player" +- depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +- help +- Say Y or M if you want to add support for 3Dlab Nano Player. +- + config SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD + tristate "Support for Google voiceHAT soundcard" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -12,7 +12,6 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- + snd-soc-googlevoicehat-codec-objs := googlevoicehat-codec.o + + # BCM2708 Machine Support +-snd-soc-3dlab-nano-player-objs := 3dlab-nano-player.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o + snd-soc-justboom-dac-objs := justboom-dac.o +@@ -20,7 +19,7 @@ snd-soc-rpi-cirrus-objs := rpi-cirrus.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-codec-objs := iqaudio-codec.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o +- snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o ++snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o + snd-soc-audiosense-pi-objs := audiosense-pi.o +@@ -36,7 +35,6 @@ snd-soc-fe-pi-audio-objs := fe-pi-audio. + snd-soc-rpi-simple-soundcard-objs := rpi-simple-soundcard.o + snd-soc-rpi-wm8804-soundcard-objs := rpi-wm8804-soundcard.o + +-obj-$(CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER) += snd-soc-3dlab-nano-player.o + obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o +@@ -45,7 +43,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_CODEC) += snd-soc-iqaudio-codec.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +- obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o ++obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o + obj-$(CONFIG_SND_AUDIOSENSE_PI) += snd-soc-audiosense-pi.o diff --git a/target/linux/brcm2708/patches-4.19/950-0449-staging-bcm2835-audio-Drop-superfluous-mutex-lock-du.patch b/target/linux/brcm2708/patches-4.19/950-0449-staging-bcm2835-audio-Drop-superfluous-mutex-lock-du.patch deleted file mode 100644 index e32c0b014d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0449-staging-bcm2835-audio-Drop-superfluous-mutex-lock-du.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 3c7663a9b1763f64250db4b975a3ce246ef32e0f Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:45 +0200 -Subject: [PATCH 449/806] staging: bcm2835-audio: Drop superfluous mutex lock - during prepare - -commit f0eb15d055380ff127e5f12c8fad2b36bdb3c006 upstream. - -The chip->audio_mutex is used basically for protecting the opened -stream assignment, and the prepare callback is irrelevant with it. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 8 ++------ - 1 file changed, 2 insertions(+), 6 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -218,8 +218,6 @@ static int snd_bcm2835_pcm_prepare(struc - int channels; - int err; - -- mutex_lock(&chip->audio_mutex); -- - /* notify the vchiq that it should enter spdif passthrough mode by - * setting channels=0 (see - * https://github.com/raspberrypi/linux/issues/528) -@@ -233,7 +231,7 @@ static int snd_bcm2835_pcm_prepare(struc - runtime->rate, - snd_pcm_format_width(runtime->format)); - if (err < 0) -- goto out; -+ return err; - - memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); - -@@ -246,9 +244,7 @@ static int snd_bcm2835_pcm_prepare(struc - alsa_stream->pos = 0; - alsa_stream->draining = false; - -- out: -- mutex_unlock(&chip->audio_mutex); -- return err; -+ return 0; - } - - static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream, diff --git a/target/linux/brcm2708/patches-4.19/950-0450-.gitignore-Add-.dtbo-explicitly.patch b/target/linux/brcm2708/patches-4.19/950-0450-.gitignore-Add-.dtbo-explicitly.patch new file mode 100644 index 0000000000..6a4566abd8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0450-.gitignore-Add-.dtbo-explicitly.patch @@ -0,0 +1,22 @@ +From bd4e0a6ad64c1211094776923bf61bd6ede3f043 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 21 May 2019 15:17:33 +0100 +Subject: [PATCH] .gitignore: Add *.dtbo explicitly + +Signed-off-by: popcornmix +--- + .gitignore | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/.gitignore ++++ b/.gitignore +@@ -15,7 +15,8 @@ + *.bin + *.bz2 + *.c.[012]*.* +-*.dtb* ++*.dtb ++*.dtbo + *.dtb.S + *.dwo + *.elf diff --git a/target/linux/brcm2708/patches-4.19/950-0450-staging-bcm2835-audio-Add-10ms-period-constraint.patch b/target/linux/brcm2708/patches-4.19/950-0450-staging-bcm2835-audio-Add-10ms-period-constraint.patch deleted file mode 100644 index 2c294b54df..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0450-staging-bcm2835-audio-Add-10ms-period-constraint.patch +++ /dev/null @@ -1,33 +0,0 @@ -From daa78c198ece1ec901ee565c869ee1a60a95061d Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:46 +0200 -Subject: [PATCH 450/806] staging: bcm2835-audio: Add 10ms period constraint - -commit 93c66acaf68b5247c3121a46a71ff6a70fc1d492 upstream. - -It seems that the resolution of vc04 callback is in 10 msec; i.e. the -minimal period size is also 10 msec. - -This patch adds the corresponding hw constraint. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -145,6 +145,11 @@ static int snd_bcm2835_playback_open_gen - SNDRV_PCM_HW_PARAM_PERIOD_BYTES, - 16); - -+ /* position update is in 10ms order */ -+ snd_pcm_hw_constraint_minmax(runtime, -+ SNDRV_PCM_HW_PARAM_PERIOD_TIME, -+ 10 * 1000, UINT_MAX); -+ - chip->alsa_stream[idx] = alsa_stream; - - chip->opened |= (1 << idx); diff --git a/target/linux/brcm2708/patches-4.19/950-0451-Bluetooth-Check-key-sizes-only-when-Secure-Simple-Pa.patch b/target/linux/brcm2708/patches-4.19/950-0451-Bluetooth-Check-key-sizes-only-when-Secure-Simple-Pa.patch new file mode 100644 index 0000000000..28c7450564 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0451-Bluetooth-Check-key-sizes-only-when-Secure-Simple-Pa.patch @@ -0,0 +1,39 @@ +From 83f0a8986ae42e33bc16acda0451dce2cf4dfb55 Mon Sep 17 00:00:00 2001 +From: Marcel Holtmann +Date: Wed, 22 May 2019 09:05:40 +0200 +Subject: [PATCH] Bluetooth: Check key sizes only when Secure Simple + Pairing is enabled + +The encryption is only mandatory to be enforced when both sides are using +Secure Simple Pairing and this means the key size check makes only sense +in that case. + +On legacy Bluetooth 2.0 and earlier devices like mice the encryption was +optional and thus causing an issue if the key size check is not bound to +using Secure Simple Pairing. + +Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections") +Signed-off-by: Marcel Holtmann +Cc: stable@vger.kernel.org +--- + net/bluetooth/hci_conn.c | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +--- a/net/bluetooth/hci_conn.c ++++ b/net/bluetooth/hci_conn.c +@@ -1272,8 +1272,13 @@ int hci_conn_check_link_mode(struct hci_ + return 0; + } + +- if (hci_conn_ssp_enabled(conn) && +- !test_bit(HCI_CONN_ENCRYPT, &conn->flags)) ++ /* If Secure Simple Pairing is not enabled, then legacy connection ++ * setup is used and no encryption or key sizes can be enforced. ++ */ ++ if (!hci_conn_ssp_enabled(conn)) ++ return 1; ++ ++ if (!test_bit(HCI_CONN_ENCRYPT, &conn->flags)) + return 0; + + return 1; diff --git a/target/linux/brcm2708/patches-4.19/950-0451-staging-bcm2835-audio-Make-single-vchi-handle.patch b/target/linux/brcm2708/patches-4.19/950-0451-staging-bcm2835-audio-Make-single-vchi-handle.patch deleted file mode 100644 index e2cc298f4a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0451-staging-bcm2835-audio-Make-single-vchi-handle.patch +++ /dev/null @@ -1,412 +0,0 @@ -From 98a1612b199cb3060306c05d1a6d7ca18ef08475 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:47 +0200 -Subject: [PATCH 451/806] staging: bcm2835-audio: Make single vchi handle - -commit 326a6edcb2ada56375bd7d3fc24c83f58e8da7f3 upstream. - -The bcm2835_audio_instance object contains the array of -VCHI_SERVICE_HANDLE_T, while the code assumes and uses only the first -element explicitly. Let's reduce to a single vchi handle for -simplifying the code. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../bcm2835-audio/bcm2835-vchiq.c | 170 ++++++------------ - 1 file changed, 58 insertions(+), 112 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -44,8 +44,7 @@ - #endif - - struct bcm2835_audio_instance { -- unsigned int num_connections; -- VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; -+ VCHI_SERVICE_HANDLE_T vchi_handle; - struct completion msg_avail_comp; - struct mutex vchi_mutex; - struct bcm2835_alsa_stream *alsa_stream; -@@ -202,12 +201,12 @@ static void audio_vchi_callback(void *pa - BUG(); - return; - } -- if (!instance->vchi_handle[0]) { -- LOG_ERR(" .. instance->vchi_handle[0] is null\n"); -+ if (!instance->vchi_handle) { -+ LOG_ERR(" .. instance->vchi_handle is null\n"); - BUG(); - return; - } -- status = vchi_msg_dequeue(instance->vchi_handle[0], -+ status = vchi_msg_dequeue(instance->vchi_handle, - &m, sizeof(m), &msg_len, VCHI_FLAGS_NONE); - if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { - LOG_DBG(" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n", -@@ -237,102 +236,61 @@ static void audio_vchi_callback(void *pa - - static struct bcm2835_audio_instance * - vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance, -- VCHI_CONNECTION_T **vchi_connections, -- unsigned int num_connections) -+ VCHI_CONNECTION_T *vchi_connection) - { -- unsigned int i; -+ SERVICE_CREATION_T params = { -+ .version = VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER), -+ .service_id = VC_AUDIO_SERVER_NAME, -+ .connection = vchi_connection, -+ .rx_fifo_size = 0, -+ .tx_fifo_size = 0, -+ .callback = audio_vchi_callback, -+ .want_unaligned_bulk_rx = 1, //TODO: remove VCOS_FALSE -+ .want_unaligned_bulk_tx = 1, //TODO: remove VCOS_FALSE -+ .want_crc = 0 -+ }; - struct bcm2835_audio_instance *instance; - int status; -- int ret; -- -- LOG_DBG("%s: start", __func__); - -- if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { -- LOG_ERR("%s: unsupported number of connections %u (max=%u)\n", -- __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); -- -- return ERR_PTR(-EINVAL); -- } - /* Allocate memory for this instance */ - instance = kzalloc(sizeof(*instance), GFP_KERNEL); - if (!instance) - return ERR_PTR(-ENOMEM); - -- instance->num_connections = num_connections; -- - /* Create a lock for exclusive, serialized VCHI connection access */ - mutex_init(&instance->vchi_mutex); - /* Open the VCHI service connections */ -- for (i = 0; i < num_connections; i++) { -- SERVICE_CREATION_T params = { -- .version = VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER), -- .service_id = VC_AUDIO_SERVER_NAME, -- .connection = vchi_connections[i], -- .rx_fifo_size = 0, -- .tx_fifo_size = 0, -- .callback = audio_vchi_callback, -- .callback_param = instance, -- .want_unaligned_bulk_rx = 1, //TODO: remove VCOS_FALSE -- .want_unaligned_bulk_tx = 1, //TODO: remove VCOS_FALSE -- .want_crc = 0 -- }; -- -- LOG_DBG("%s: about to open %i\n", __func__, i); -- status = vchi_service_open(vchi_instance, ¶ms, -- &instance->vchi_handle[i]); -+ params.callback_param = instance, - -- LOG_DBG("%s: opened %i: %p=%d\n", __func__, i, instance->vchi_handle[i], status); -- if (status) { -- LOG_ERR("%s: failed to open VCHI service connection (status=%d)\n", -- __func__, status); -- ret = -EPERM; -- goto err_close_services; -- } -- /* Finished with the service for now */ -- vchi_service_release(instance->vchi_handle[i]); -- } -- -- LOG_DBG("%s: okay\n", __func__); -- return instance; -+ status = vchi_service_open(vchi_instance, ¶ms, -+ &instance->vchi_handle); - --err_close_services: -- for (i = 0; i < instance->num_connections; i++) { -- LOG_ERR("%s: closing %i: %p\n", __func__, i, instance->vchi_handle[i]); -- if (instance->vchi_handle[i]) -- vchi_service_close(instance->vchi_handle[i]); -+ if (status) { -+ LOG_ERR("%s: failed to open VCHI service connection (status=%d)\n", -+ __func__, status); -+ kfree(instance); -+ return ERR_PTR(-EPERM); - } - -- kfree(instance); -- LOG_ERR("%s: error\n", __func__); -+ /* Finished with the service for now */ -+ vchi_service_release(instance->vchi_handle); - -- return ERR_PTR(ret); -+ return instance; - } - - static int vc_vchi_audio_deinit(struct bcm2835_audio_instance *instance) - { -- unsigned int i; -- -- if (!instance) { -- LOG_ERR("%s: invalid handle %p\n", __func__, instance); -- -- return -1; -- } -+ int status; - -- LOG_DBG(" .. about to lock (%d)\n", instance->num_connections); - mutex_lock(&instance->vchi_mutex); - - /* Close all VCHI service connections */ -- for (i = 0; i < instance->num_connections; i++) { -- int status; -- -- LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]); -- vchi_service_use(instance->vchi_handle[i]); -+ vchi_service_use(instance->vchi_handle); - -- status = vchi_service_close(instance->vchi_handle[i]); -- if (status) { -- LOG_DBG("%s: failed to close VCHI service connection (status=%d)\n", -- __func__, status); -- } -+ status = vchi_service_close(instance->vchi_handle); -+ if (status) { -+ LOG_DBG("%s: failed to close VCHI service connection (status=%d)\n", -+ __func__, status); - } - - mutex_unlock(&instance->vchi_mutex); -@@ -383,19 +341,9 @@ static int bcm2835_audio_open_connection - (struct bcm2835_audio_instance *)alsa_stream->instance; - struct bcm2835_vchi_ctx *vhci_ctx = alsa_stream->chip->vchi_ctx; - -- LOG_INFO("%s: start\n", __func__); -- BUG_ON(instance); -- if (instance) { -- LOG_ERR("%s: VCHI instance already open (%p)\n", -- __func__, instance); -- instance->alsa_stream = alsa_stream; -- alsa_stream->instance = instance; -- return 0; -- } -- - /* Initialize an instance of the audio service */ - instance = vc_vchi_audio_init(vhci_ctx->vchi_instance, -- &vhci_ctx->vchi_connection, 1); -+ vhci_ctx->vchi_connection); - - if (IS_ERR(instance)) { - LOG_ERR("%s: failed to initialize audio service\n", __func__); -@@ -407,8 +355,6 @@ static int bcm2835_audio_open_connection - instance->alsa_stream = alsa_stream; - alsa_stream->instance = instance; - -- LOG_DBG(" success !\n"); -- - return 0; - } - -@@ -431,12 +377,12 @@ int bcm2835_audio_open(struct bcm2835_al - LOG_DBG(" instance (%p)\n", instance); - - mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle[0]); -+ vchi_service_use(instance->vchi_handle); - - m.type = VC_AUDIO_MSG_TYPE_OPEN; - - /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], -+ status = bcm2835_vchi_msg_queue(instance->vchi_handle, - &m, sizeof(m)); - - if (status) { -@@ -450,7 +396,7 @@ int bcm2835_audio_open(struct bcm2835_al - ret = 0; - - unlock: -- vchi_service_release(instance->vchi_handle[0]); -+ vchi_service_release(instance->vchi_handle); - mutex_unlock(&instance->vchi_mutex); - - free_wq: -@@ -472,7 +418,7 @@ int bcm2835_audio_set_ctls(struct bcm283 - chip->dest, chip->volume); - - mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle[0]); -+ vchi_service_use(instance->vchi_handle); - - instance->result = -1; - -@@ -487,7 +433,7 @@ int bcm2835_audio_set_ctls(struct bcm283 - init_completion(&instance->msg_avail_comp); - - /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], -+ status = bcm2835_vchi_msg_queue(instance->vchi_handle, - &m, sizeof(m)); - - if (status) { -@@ -511,7 +457,7 @@ int bcm2835_audio_set_ctls(struct bcm283 - ret = 0; - - unlock: -- vchi_service_release(instance->vchi_handle[0]); -+ vchi_service_release(instance->vchi_handle); - mutex_unlock(&instance->vchi_mutex); - - return ret; -@@ -537,7 +483,7 @@ int bcm2835_audio_set_params(struct bcm2 - } - - mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle[0]); -+ vchi_service_use(instance->vchi_handle); - - instance->result = -1; - -@@ -550,7 +496,7 @@ int bcm2835_audio_set_params(struct bcm2 - init_completion(&instance->msg_avail_comp); - - /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], -+ status = bcm2835_vchi_msg_queue(instance->vchi_handle, - &m, sizeof(m)); - - if (status) { -@@ -574,7 +520,7 @@ int bcm2835_audio_set_params(struct bcm2 - ret = 0; - - unlock: -- vchi_service_release(instance->vchi_handle[0]); -+ vchi_service_release(instance->vchi_handle); - mutex_unlock(&instance->vchi_mutex); - - return ret; -@@ -588,12 +534,12 @@ static int bcm2835_audio_start_worker(st - int ret; - - mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle[0]); -+ vchi_service_use(instance->vchi_handle); - - m.type = VC_AUDIO_MSG_TYPE_START; - - /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], -+ status = bcm2835_vchi_msg_queue(instance->vchi_handle, - &m, sizeof(m)); - - if (status) { -@@ -607,7 +553,7 @@ static int bcm2835_audio_start_worker(st - ret = 0; - - unlock: -- vchi_service_release(instance->vchi_handle[0]); -+ vchi_service_release(instance->vchi_handle); - mutex_unlock(&instance->vchi_mutex); - return ret; - } -@@ -620,13 +566,13 @@ static int bcm2835_audio_stop_worker(str - int ret; - - mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle[0]); -+ vchi_service_use(instance->vchi_handle); - - m.type = VC_AUDIO_MSG_TYPE_STOP; - m.u.stop.draining = alsa_stream->draining; - - /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], -+ status = bcm2835_vchi_msg_queue(instance->vchi_handle, - &m, sizeof(m)); - - if (status) { -@@ -640,7 +586,7 @@ static int bcm2835_audio_stop_worker(str - ret = 0; - - unlock: -- vchi_service_release(instance->vchi_handle[0]); -+ vchi_service_release(instance->vchi_handle); - mutex_unlock(&instance->vchi_mutex); - return ret; - } -@@ -655,7 +601,7 @@ int bcm2835_audio_close(struct bcm2835_a - my_workqueue_quit(alsa_stream); - - mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle[0]); -+ vchi_service_use(instance->vchi_handle); - - m.type = VC_AUDIO_MSG_TYPE_CLOSE; - -@@ -663,7 +609,7 @@ int bcm2835_audio_close(struct bcm2835_a - init_completion(&instance->msg_avail_comp); - - /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], -+ status = bcm2835_vchi_msg_queue(instance->vchi_handle, - &m, sizeof(m)); - - if (status) { -@@ -687,7 +633,7 @@ int bcm2835_audio_close(struct bcm2835_a - ret = 0; - - unlock: -- vchi_service_release(instance->vchi_handle[0]); -+ vchi_service_release(instance->vchi_handle); - mutex_unlock(&instance->vchi_mutex); - - /* Stop the audio service */ -@@ -708,10 +654,10 @@ static int bcm2835_audio_write_worker(st - LOG_INFO(" Writing %d bytes from %p\n", count, src); - - mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle[0]); -+ vchi_service_use(instance->vchi_handle); - - if (instance->peer_version == 0 && -- vchi_get_peer_version(instance->vchi_handle[0], &instance->peer_version) == 0) -+ vchi_get_peer_version(instance->vchi_handle, &instance->peer_version) == 0) - LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version); - - m.type = VC_AUDIO_MSG_TYPE_WRITE; -@@ -723,7 +669,7 @@ static int bcm2835_audio_write_worker(st - m.u.write.silence = src == NULL; - - /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], -+ status = bcm2835_vchi_msg_queue(instance->vchi_handle, - &m, sizeof(m)); - - if (status) { -@@ -736,7 +682,7 @@ static int bcm2835_audio_write_worker(st - if (!m.u.write.silence) { - if (!m.u.write.max_packet) { - /* Send the message to the videocore */ -- status = vchi_bulk_queue_transmit(instance->vchi_handle[0], -+ status = vchi_bulk_queue_transmit(instance->vchi_handle, - src, count, - 0 * VCHI_FLAGS_BLOCK_UNTIL_QUEUED - + -@@ -746,7 +692,7 @@ static int bcm2835_audio_write_worker(st - while (count > 0) { - int bytes = min_t(int, m.u.write.max_packet, count); - -- status = bcm2835_vchi_msg_queue(instance->vchi_handle[0], -+ status = bcm2835_vchi_msg_queue(instance->vchi_handle, - src, bytes); - src = (char *)src + bytes; - count -= bytes; -@@ -763,7 +709,7 @@ static int bcm2835_audio_write_worker(st - ret = 0; - - unlock: -- vchi_service_release(instance->vchi_handle[0]); -+ vchi_service_release(instance->vchi_handle); - mutex_unlock(&instance->vchi_mutex); - return ret; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0452-staging-bcm2835-audio-Code-refactoring-of-vchiq-acce.patch b/target/linux/brcm2708/patches-4.19/950-0452-staging-bcm2835-audio-Code-refactoring-of-vchiq-acce.patch deleted file mode 100644 index 38fcd39cd3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0452-staging-bcm2835-audio-Code-refactoring-of-vchiq-acce.patch +++ /dev/null @@ -1,575 +0,0 @@ -From 43f89ac74f3f221e3036a1ec311b24016860d15e Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:48 +0200 -Subject: [PATCH 452/806] staging: bcm2835-audio: Code refactoring of vchiq - accessor codes - -commit 769a8e9bf5cf39813f52962fdafdf7e4d52ad585 upstream. - -This is a cleanup and code refactoring in bcm2835-vchiq.c. - -The major code changes are to provide local helpers for easier use of -lock / unlock, and message passing with/without response wait. This -allows us to reduce lots of open codes. - -Also, the max packet is set at opening the stream, not at each time -when the write gets called. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../bcm2835-audio/bcm2835-vchiq.c | 440 ++++++------------ - 1 file changed, 142 insertions(+), 298 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -49,6 +49,7 @@ struct bcm2835_audio_instance { - struct mutex vchi_mutex; - struct bcm2835_alsa_stream *alsa_stream; - int result; -+ unsigned int max_packet; - short peer_version; - }; - -@@ -65,16 +66,68 @@ static int bcm2835_audio_start_worker(st - static int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream, - unsigned int count, void *src); - --// Routine to send a message across a service -+static void bcm2835_audio_lock(struct bcm2835_audio_instance *instance) -+{ -+ mutex_lock(&instance->vchi_mutex); -+ vchi_service_use(instance->vchi_handle); -+} -+ -+static void bcm2835_audio_unlock(struct bcm2835_audio_instance *instance) -+{ -+ vchi_service_release(instance->vchi_handle); -+ mutex_unlock(&instance->vchi_mutex); -+} -+ -+static int bcm2835_audio_send_msg_locked(struct bcm2835_audio_instance *instance, -+ struct vc_audio_msg *m, bool wait) -+{ -+ int status; -+ -+ if (wait) { -+ instance->result = -1; -+ init_completion(&instance->msg_avail_comp); -+ } -+ -+ status = vchi_queue_kernel_message(instance->vchi_handle, -+ m, sizeof(*m)); -+ if (status) { -+ LOG_ERR("vchi message queue failed: %d, msg=%d\n", -+ status, m->type); -+ return -EIO; -+ } -+ -+ if (wait) { -+ if (!wait_for_completion_timeout(&instance->msg_avail_comp, -+ msecs_to_jiffies(10 * 1000))) { -+ LOG_ERR("vchi message timeout, msg=%d\n", m->type); -+ return -ETIMEDOUT; -+ } else if (instance->result) { -+ LOG_ERR("vchi message response error:%d, msg=%d\n", -+ instance->result, m->type); -+ return -EIO; -+ } -+ } -+ -+ return 0; -+} - --static int --bcm2835_vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle, -- void *data, -- unsigned int size) --{ -- return vchi_queue_kernel_message(handle, -- data, -- size); -+static int bcm2835_audio_send_msg(struct bcm2835_audio_instance *instance, -+ struct vc_audio_msg *m, bool wait) -+{ -+ int err; -+ -+ bcm2835_audio_lock(instance); -+ err = bcm2835_audio_send_msg_locked(instance, m, wait); -+ bcm2835_audio_unlock(instance); -+ return err; -+} -+ -+static int bcm2835_audio_send_simple(struct bcm2835_audio_instance *instance, -+ int type, bool wait) -+{ -+ struct vc_audio_msg m = { .type = type }; -+ -+ return bcm2835_audio_send_msg(instance, &m, wait); - } - - static const u32 BCM2835_AUDIO_WRITE_COOKIE1 = ('B' << 24 | 'C' << 16 | -@@ -283,10 +336,9 @@ static int vc_vchi_audio_deinit(struct b - int status; - - mutex_lock(&instance->vchi_mutex); -- -- /* Close all VCHI service connections */ - vchi_service_use(instance->vchi_handle); - -+ /* Close all VCHI service connections */ - status = vchi_service_close(instance->vchi_handle); - if (status) { - LOG_DBG("%s: failed to close VCHI service connection (status=%d)\n", -@@ -345,12 +397,8 @@ static int bcm2835_audio_open_connection - instance = vc_vchi_audio_init(vhci_ctx->vchi_instance, - vhci_ctx->vchi_connection); - -- if (IS_ERR(instance)) { -- LOG_ERR("%s: failed to initialize audio service\n", __func__); -- -- /* vchi_instance is retained for use the next time. */ -+ if (IS_ERR(instance)) - return PTR_ERR(instance); -- } - - instance->alsa_stream = alsa_stream; - alsa_stream->instance = instance; -@@ -361,66 +409,44 @@ static int bcm2835_audio_open_connection - int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream) - { - struct bcm2835_audio_instance *instance; -- struct vc_audio_msg m; -- int status; -- int ret; -+ int err; - - alsa_stream->my_wq = alloc_workqueue("my_queue", WQ_HIGHPRI, 1); - if (!alsa_stream->my_wq) - return -ENOMEM; - -- ret = bcm2835_audio_open_connection(alsa_stream); -- if (ret) -+ err = bcm2835_audio_open_connection(alsa_stream); -+ if (err < 0) - goto free_wq; - - instance = alsa_stream->instance; -- LOG_DBG(" instance (%p)\n", instance); -- -- mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle); -- -- m.type = VC_AUDIO_MSG_TYPE_OPEN; -- -- /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle, -- &m, sizeof(m)); -- -- if (status) { -- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -- __func__, status); -- -- ret = -1; -- goto unlock; -- } -- -- ret = 0; - --unlock: -- vchi_service_release(instance->vchi_handle); -- mutex_unlock(&instance->vchi_mutex); -+ err = bcm2835_audio_send_simple(instance, VC_AUDIO_MSG_TYPE_OPEN, -+ false); -+ if (err < 0) -+ goto deinit; -+ -+ bcm2835_audio_lock(instance); -+ vchi_get_peer_version(instance->vchi_handle, &instance->peer_version); -+ bcm2835_audio_unlock(instance); -+ if (instance->peer_version < 2 || force_bulk) -+ instance->max_packet = 0; /* bulk transfer */ -+ else -+ instance->max_packet = 4000; - --free_wq: -- if (ret) -- destroy_workqueue(alsa_stream->my_wq); -+ return 0; - -- return ret; -+ deinit: -+ vc_vchi_audio_deinit(instance); -+ free_wq: -+ destroy_workqueue(alsa_stream->my_wq); -+ return err; - } - - int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream) - { -- struct vc_audio_msg m; -- struct bcm2835_audio_instance *instance = alsa_stream->instance; - struct bcm2835_chip *chip = alsa_stream->chip; -- int status; -- int ret; -- -- LOG_INFO(" Setting ALSA dest(%d), volume(%d)\n", -- chip->dest, chip->volume); -- -- mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle); -- -- instance->result = -1; -+ struct vc_audio_msg m = {}; - - m.type = VC_AUDIO_MSG_TYPE_CONTROL; - m.u.control.dest = chip->dest; -@@ -429,289 +455,107 @@ int bcm2835_audio_set_ctls(struct bcm283 - else - m.u.control.volume = alsa2chip(chip->volume); - -- /* Create the message available completion */ -- init_completion(&instance->msg_avail_comp); -- -- /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle, -- &m, sizeof(m)); -- -- if (status) { -- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -- __func__, status); -- -- ret = -1; -- goto unlock; -- } -- -- /* We are expecting a reply from the videocore */ -- wait_for_completion(&instance->msg_avail_comp); -- -- if (instance->result) { -- LOG_ERR("%s: result=%d\n", __func__, instance->result); -- -- ret = -1; -- goto unlock; -- } -- -- ret = 0; -- --unlock: -- vchi_service_release(instance->vchi_handle); -- mutex_unlock(&instance->vchi_mutex); -- -- return ret; -+ return bcm2835_audio_send_msg(alsa_stream->instance, &m, true); - } - - int bcm2835_audio_set_params(struct bcm2835_alsa_stream *alsa_stream, - unsigned int channels, unsigned int samplerate, - unsigned int bps) - { -- struct vc_audio_msg m; -- struct bcm2835_audio_instance *instance = alsa_stream->instance; -- int status; -- int ret; -- -- LOG_INFO(" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n", -- channels, samplerate, bps); -+ struct vc_audio_msg m = { -+ .type = VC_AUDIO_MSG_TYPE_CONFIG, -+ .u.config.channels = channels, -+ .u.config.samplerate = samplerate, -+ .u.config.bps = bps, -+ }; -+ int err; - - /* resend ctls - alsa_stream may not have been open when first send */ -- ret = bcm2835_audio_set_ctls(alsa_stream); -- if (ret) { -- LOG_ERR(" Alsa controls not supported\n"); -- return -EINVAL; -- } -+ err = bcm2835_audio_set_ctls(alsa_stream); -+ if (err) -+ return err; - -- mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle); -- -- instance->result = -1; -- -- m.type = VC_AUDIO_MSG_TYPE_CONFIG; -- m.u.config.channels = channels; -- m.u.config.samplerate = samplerate; -- m.u.config.bps = bps; -- -- /* Create the message available completion */ -- init_completion(&instance->msg_avail_comp); -- -- /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle, -- &m, sizeof(m)); -- -- if (status) { -- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -- __func__, status); -- -- ret = -1; -- goto unlock; -- } -- -- /* We are expecting a reply from the videocore */ -- wait_for_completion(&instance->msg_avail_comp); -- -- if (instance->result) { -- LOG_ERR("%s: result=%d", __func__, instance->result); -- -- ret = -1; -- goto unlock; -- } -- -- ret = 0; -- --unlock: -- vchi_service_release(instance->vchi_handle); -- mutex_unlock(&instance->vchi_mutex); -- -- return ret; -+ return bcm2835_audio_send_msg(alsa_stream->instance, &m, true); - } - - static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream) - { -- struct vc_audio_msg m; -- struct bcm2835_audio_instance *instance = alsa_stream->instance; -- int status; -- int ret; -- -- mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle); -- -- m.type = VC_AUDIO_MSG_TYPE_START; -- -- /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle, -- &m, sizeof(m)); -- -- if (status) { -- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -- __func__, status); -- -- ret = -1; -- goto unlock; -- } -- -- ret = 0; -- --unlock: -- vchi_service_release(instance->vchi_handle); -- mutex_unlock(&instance->vchi_mutex); -- return ret; -+ return bcm2835_audio_send_simple(alsa_stream->instance, -+ VC_AUDIO_MSG_TYPE_START, false); - } - - static int bcm2835_audio_stop_worker(struct bcm2835_alsa_stream *alsa_stream) - { -- struct vc_audio_msg m; -- struct bcm2835_audio_instance *instance = alsa_stream->instance; -- int status; -- int ret; -- -- mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle); -- -- m.type = VC_AUDIO_MSG_TYPE_STOP; -- m.u.stop.draining = alsa_stream->draining; -- -- /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle, -- &m, sizeof(m)); -- -- if (status) { -- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -- __func__, status); -- -- ret = -1; -- goto unlock; -- } -- -- ret = 0; -- --unlock: -- vchi_service_release(instance->vchi_handle); -- mutex_unlock(&instance->vchi_mutex); -- return ret; -+ return bcm2835_audio_send_simple(alsa_stream->instance, -+ VC_AUDIO_MSG_TYPE_STOP, false); - } - - int bcm2835_audio_close(struct bcm2835_alsa_stream *alsa_stream) - { -- struct vc_audio_msg m; - struct bcm2835_audio_instance *instance = alsa_stream->instance; -- int status; -- int ret; -+ int err; - - my_workqueue_quit(alsa_stream); - -- mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle); -- -- m.type = VC_AUDIO_MSG_TYPE_CLOSE; -- -- /* Create the message available completion */ -- init_completion(&instance->msg_avail_comp); -- -- /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle, -- &m, sizeof(m)); -- -- if (status) { -- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -- __func__, status); -- ret = -1; -- goto unlock; -- } -- -- /* We are expecting a reply from the videocore */ -- wait_for_completion(&instance->msg_avail_comp); -- -- if (instance->result) { -- LOG_ERR("%s: failed result (result=%d)\n", -- __func__, instance->result); -- -- ret = -1; -- goto unlock; -- } -- -- ret = 0; -- --unlock: -- vchi_service_release(instance->vchi_handle); -- mutex_unlock(&instance->vchi_mutex); -+ err = bcm2835_audio_send_simple(alsa_stream->instance, -+ VC_AUDIO_MSG_TYPE_CLOSE, true); - - /* Stop the audio service */ - vc_vchi_audio_deinit(instance); - alsa_stream->instance = NULL; - -- return ret; -+ return err; - } - - static int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream, -- unsigned int count, void *src) -+ unsigned int size, void *src) - { -- struct vc_audio_msg m; - struct bcm2835_audio_instance *instance = alsa_stream->instance; -- int status; -- int ret; -- -- LOG_INFO(" Writing %d bytes from %p\n", count, src); -- -- mutex_lock(&instance->vchi_mutex); -- vchi_service_use(instance->vchi_handle); -+ struct vc_audio_msg m = { -+ .type = VC_AUDIO_MSG_TYPE_WRITE, -+ .u.write.count = size, -+ .u.write.max_packet = instance->max_packet, -+ .u.write.cookie1 = BCM2835_AUDIO_WRITE_COOKIE1, -+ .u.write.cookie2 = BCM2835_AUDIO_WRITE_COOKIE2, -+ }; -+ unsigned int count; -+ int err, status; - -- if (instance->peer_version == 0 && -- vchi_get_peer_version(instance->vchi_handle, &instance->peer_version) == 0) -- LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version); -- -- m.type = VC_AUDIO_MSG_TYPE_WRITE; -- m.u.write.count = count; -- // old version uses bulk, new version uses control -- m.u.write.max_packet = instance->peer_version < 2 || force_bulk ? 0 : 4000; -- m.u.write.cookie1 = BCM2835_AUDIO_WRITE_COOKIE1; -- m.u.write.cookie2 = BCM2835_AUDIO_WRITE_COOKIE2; -- m.u.write.silence = src == NULL; -- -- /* Send the message to the videocore */ -- status = bcm2835_vchi_msg_queue(instance->vchi_handle, -- &m, sizeof(m)); -+ if (!size) -+ return 0; - -- if (status) { -- LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -- __func__, status); -- -- ret = -1; -+ bcm2835_audio_lock(instance); -+ err = bcm2835_audio_send_msg_locked(instance, &m, false); -+ if (err < 0) - goto unlock; -- } -- if (!m.u.write.silence) { -- if (!m.u.write.max_packet) { -- /* Send the message to the videocore */ -- status = vchi_bulk_queue_transmit(instance->vchi_handle, -- src, count, -- 0 * VCHI_FLAGS_BLOCK_UNTIL_QUEUED -- + -- 1 * VCHI_FLAGS_BLOCK_UNTIL_DATA_READ, -- NULL); -- } else { -- while (count > 0) { -- int bytes = min_t(int, m.u.write.max_packet, count); - -- status = bcm2835_vchi_msg_queue(instance->vchi_handle, -- src, bytes); -- src = (char *)src + bytes; -- count -= bytes; -- } -- } -- if (status) { -- LOG_ERR("%s: failed on vchi_bulk_queue_transmit (status=%d)\n", -- __func__, status); -+ count = size; -+ if (!instance->max_packet) { -+ /* Send the message to the videocore */ -+ status = vchi_bulk_queue_transmit(instance->vchi_handle, -+ src, count, -+ VCHI_FLAGS_BLOCK_UNTIL_DATA_READ, -+ NULL); -+ } else { -+ while (count > 0) { -+ int bytes = min(instance->max_packet, count); - -- ret = -1; -- goto unlock; -+ status = vchi_queue_kernel_message(instance->vchi_handle, -+ src, bytes); -+ src += bytes; -+ count -= bytes; - } - } -- ret = 0; - --unlock: -- vchi_service_release(instance->vchi_handle); -- mutex_unlock(&instance->vchi_mutex); -- return ret; -+ if (status) { -+ LOG_ERR("failed on %d bytes transfer (status=%d)\n", -+ size, status); -+ err = -EIO; -+ } -+ -+ unlock: -+ bcm2835_audio_unlock(instance); -+ return err; - } - - unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream) diff --git a/target/linux/brcm2708/patches-4.19/950-0452-usb-dwc_otg-Clean-up-interrupt-claiming-code.patch b/target/linux/brcm2708/patches-4.19/950-0452-usb-dwc_otg-Clean-up-interrupt-claiming-code.patch new file mode 100644 index 0000000000..ba021f1e22 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0452-usb-dwc_otg-Clean-up-interrupt-claiming-code.patch @@ -0,0 +1,157 @@ +From efb54d0f0445f3d279a7eae7395b566c96d080de Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 7 May 2019 17:23:41 +0100 +Subject: [PATCH] usb: dwc_otg: Clean up interrupt claiming code + +The FIQ/IRQ interrupt number identification code is scattered through +the dwc_otg driver. Rationalise it, simplifying the code and solving +an existing issue. + +See: https://github.com/raspberrypi/linux/issues/2612 + +Signed-off-by: Phil Elwell +--- + drivers/usb/host/dwc_otg/dwc_otg_driver.c | 18 +++++++++----- + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 10 +++----- + drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 6 +++++ + drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c | 26 +++----------------- + 4 files changed, 25 insertions(+), 35 deletions(-) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c +@@ -624,11 +624,7 @@ static int dwc_otg_driver_remove( + * Free the IRQ + */ + if (otg_dev->common_irq_installed) { +-#ifdef PLATFORM_INTERFACE +- free_irq(platform_get_irq(_dev, 0), otg_dev); +-#else +- free_irq(_dev->irq, otg_dev); +-#endif ++ free_irq(otg_dev->os_dep.irq_num, otg_dev); + } else { + DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__); + return REM_RETVAL(-ENXIO); +@@ -905,7 +901,9 @@ static int dwc_otg_driver_probe( + */ + + #if defined(PLATFORM_INTERFACE) +- devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1); ++ devirq = platform_get_irq_byname(_dev, fiq_enable ? "soft" : "usb"); ++ if (devirq < 0) ++ devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1); + #else + devirq = _dev->irq; + #endif +@@ -922,6 +920,14 @@ static int dwc_otg_driver_probe( + } else { + dwc_otg_device->common_irq_installed = 1; + } ++ dwc_otg_device->os_dep.irq_num = devirq; ++ dwc_otg_device->os_dep.fiq_num = -EINVAL; ++ if (fiq_enable) { ++ int devfiq = platform_get_irq_byname(_dev, "usb"); ++ if (devfiq < 0) ++ devfiq = platform_get_irq(_dev, 1); ++ dwc_otg_device->os_dep.fiq_num = devfiq; ++ } + + #ifndef IRQF_TRIGGER_LOW + #if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -492,7 +492,7 @@ static void hcd_init_fiq(void *cookie) + #endif + // Enable FIQ interrupt from USB peripheral + #ifdef CONFIG_ARM64 +- irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); ++ irq = otg_dev->os_dep.fiq_num; + + if (irq < 0) { + DWC_ERROR("Can't get SIM-FIQ irq"); +@@ -509,7 +509,7 @@ static void hcd_init_fiq(void *cookie) + simfiq_irq = irq; + #else + #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER +- irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); ++ irq = otg_dev->os_dep.fiq_num; + #else + irq = INTERRUPT_VC_USB; + #endif +@@ -626,11 +626,7 @@ int hcd_init(dwc_bus_dev_t *_dev) + * allocates the DMA buffer pool, registers the USB bus, requests the + * IRQ line, and calls hcd_start method. + */ +-#ifdef PLATFORM_INTERFACE +- retval = usb_add_hcd(hcd, platform_get_irq(_dev, fiq_enable ? 0 : 1), IRQF_SHARED); +-#else +- retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED); +-#endif ++ retval = usb_add_hcd(hcd, otg_dev->os_dep.irq_num, IRQF_SHARED); + if (retval < 0) { + goto error2; + } +--- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +@@ -102,6 +102,12 @@ typedef struct os_dependent { + /** Base address for MPHI peripheral */ + void *mphi_base; + ++ /** IRQ number (<0 if not valid) */ ++ int irq_num; ++ ++ /** FIQ number (<0 if not valid) */ ++ int fiq_num; ++ + #ifdef LM_INTERFACE + struct lm_device *lmdev; + #elif defined(PCI_INTERFACE) +--- a/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c +@@ -1224,30 +1224,16 @@ int pcd_init(dwc_bus_dev_t *_dev) + /* + * Setup interupt handler + */ +-#ifdef PLATFORM_INTERFACE + DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", +- platform_get_irq(_dev, fiq_enable ? 0 : 1)); +- retval = request_irq(platform_get_irq(_dev, fiq_enable ? 0 : 1), dwc_otg_pcd_irq, ++ otg_dev->os_dep.irq_num); ++ retval = request_irq(otg_dev->os_dep.irq_num, dwc_otg_pcd_irq, + IRQF_SHARED, gadget_wrapper->gadget.name, + otg_dev->pcd); + if (retval != 0) { +- DWC_ERROR("request of irq%d failed\n", +- platform_get_irq(_dev, fiq_enable ? 0 : 1)); ++ DWC_ERROR("request of irq%d failed\n", otg_dev->os_dep.irq_num); + free_wrapper(gadget_wrapper); + return -EBUSY; + } +-#else +- DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", +- _dev->irq); +- retval = request_irq(_dev->irq, dwc_otg_pcd_irq, +- IRQF_SHARED | IRQF_DISABLED, +- gadget_wrapper->gadget.name, otg_dev->pcd); +- if (retval != 0) { +- DWC_ERROR("request of irq%d failed\n", _dev->irq); +- free_wrapper(gadget_wrapper); +- return -EBUSY; +- } +-#endif + + dwc_otg_pcd_start(gadget_wrapper->pcd, &fops); + +@@ -1267,11 +1253,7 @@ void pcd_remove(dwc_bus_dev_t *_dev) + /* + * Free the IRQ + */ +-#ifdef PLATFORM_INTERFACE +- free_irq(platform_get_irq(_dev, 0), pcd); +-#else +- free_irq(_dev->irq, pcd); +-#endif ++ free_irq(otg_dev->os_dep.irq_num, pcd); + dwc_otg_pcd_remove(otg_dev->pcd); + free_wrapper(gadget_wrapper); + otg_dev->pcd = 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0453-overlays-Delete-the-deprecated-sdio-1bit-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0453-overlays-Delete-the-deprecated-sdio-1bit-overlay.patch new file mode 100644 index 0000000000..dac4386448 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0453-overlays-Delete-the-deprecated-sdio-1bit-overlay.patch @@ -0,0 +1,90 @@ +From 5edb8789ba5f9694698386683f2e4e97c70e765a Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 7 May 2019 14:27:35 +0100 +Subject: [PATCH] overlays: Delete the deprecated sdio-1bit overlay + +Use dtoverlay=sdio,bus_width=1,gpios_22_25 instead. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 - + .../boot/dts/overlays/sdio-1bit-overlay.dts | 63 ------------------- + 2 files changed, 64 deletions(-) + delete mode 100644 arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -126,7 +126,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + sc16is752-spi1.dtbo \ + sdhost.dtbo \ + sdio.dtbo \ +- sdio-1bit.dtbo \ + sdtweak.dtbo \ + smi.dtbo \ + smi-dev.dtbo \ +--- a/arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts ++++ /dev/null +@@ -1,63 +0,0 @@ +-/dts-v1/; +-/plugin/; +- +-/* Enable 1-bit SDIO from MMC interface via GPIOs 22-25. Includes sdhost overlay. */ +- +-/{ +- compatible = "brcm,bcm2708"; +- +- fragment@0 { +- target = <&mmc>; +- __overlay__ { +- status = "disabled"; +- }; +- }; +- +- fragment@1 { +- target = <&soc>; +- __overlay__ { +- #address-cells = <1>; +- #size-cells = <1>; +- +- sdio_1bit: sdio@7e300000 { +- compatible = "brcm,bcm2835-mmc", +- "brcm,bcm2835-sdhci"; +- reg = <0x7e300000 0x100>; +- interrupts = <2 30>; +- clocks = <&clocks 28/*BCM2835_CLOCK_EMMC*/>; +- dmas = <&dma 11>; +- dma-names = "rx-tx"; +- brcm,overclock-50 = <0>; +- status = "okay"; +- pinctrl-names = "default"; +- pinctrl-0 = <&sdio_1bit_pins>; +- non-removable; +- bus-width = <1>; +- }; +- }; +- }; +- +- fragment@2 { +- target = <&gpio>; +- __overlay__ { +- sdio_1bit_pins: sdio_1bit_pins { +- brcm,pins = <22 23 24 25>; +- brcm,function = <7>; /* ALT3 = SD1 */ +- brcm,pull = <0 2 2 2>; +- }; +- }; +- }; +- +- fragment@3 { +- target-path = "/aliases"; +- __overlay__ { +- mmc1 = "/soc/sdio@7e300000"; +- }; +- }; +- +- +- __overrides__ { +- poll_once = <&sdio_1bit>,"non-removable?"; +- sdio_overclock = <&sdio_1bit>,"brcm,overclock-50:0"; +- }; +-}; diff --git a/target/linux/brcm2708/patches-4.19/950-0453-staging-bcm2835-audio-Operate-non-atomic-PCM-ops.patch b/target/linux/brcm2708/patches-4.19/950-0453-staging-bcm2835-audio-Operate-non-atomic-PCM-ops.patch deleted file mode 100644 index e12d29bbb4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0453-staging-bcm2835-audio-Operate-non-atomic-PCM-ops.patch +++ /dev/null @@ -1,593 +0,0 @@ -From 87ba8310e9f0882e85926ac1ef91333f8906b303 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:49 +0200 -Subject: [PATCH 453/806] staging: bcm2835-audio: Operate non-atomic PCM ops - -commit 5c7883e5f27e829f3f3a2ba174d4a724bfd5f026 upstream. - -This is the most significant part in the patch series. - -The bcm2835-audio driver used to queue the commands to vc04 core via -workqueue, but basically the whole accesses to vc04 core are done in -the sleepable context, including the callback calls. In such a case, -rewriting the code using non-atomic PCM ops will simplify the logic a -lot. - -This patch does it: all workqueue are gone and each former-work -implementation is now directly called from PCM ops like trigger and -write transfer. - -Along with it, the DMA position updater, bcm2835_playback_fifo(), was -also rewritten to use a simpler logic. Now it handles the XRUN and -draining properly by calling snd_pcm_stop() conditionally. - -The current position is kept in atomic_t value so that it can be read -concurrently from the pointer callback. - -Also, the bcm2835_audio_instance object is allocated at the beginning -of bcm2835_audio_open(). This makes the resource management clearer. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 74 +++--- - .../bcm2835-audio/bcm2835-vchiq.c | 244 +++--------------- - .../vc04_services/bcm2835-audio/bcm2835.h | 9 +- - 3 files changed, 82 insertions(+), 245 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -11,7 +11,8 @@ - /* hardware definition */ - static const struct snd_pcm_hardware snd_bcm2835_playback_hw = { - .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | -- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), -+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | -+ SNDRV_PCM_INFO_DRAIN_TRIGGER), - .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, - .rate_min = 8000, -@@ -27,7 +28,8 @@ static const struct snd_pcm_hardware snd - - static const struct snd_pcm_hardware snd_bcm2835_playback_spdif_hw = { - .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | -- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), -+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | -+ SNDRV_PCM_INFO_DRAIN_TRIGGER), - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 | - SNDRV_PCM_RATE_48000, -@@ -47,42 +49,34 @@ static void snd_bcm2835_playback_free(st - kfree(runtime->private_data); - } - --void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream) -+void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream, -+ unsigned int bytes) - { -- unsigned int consumed = 0; -- int new_period = 0; -+ struct snd_pcm_substream *substream = alsa_stream->substream; -+ unsigned int pos; - -- audio_info("alsa_stream=%p substream=%p\n", alsa_stream, -- alsa_stream ? alsa_stream->substream : 0); -+ if (!alsa_stream->period_size) -+ return; - -- consumed = bcm2835_audio_retrieve_buffers(alsa_stream); -- -- /* We get called only if playback was triggered, So, the number of buffers we retrieve in -- * each iteration are the buffers that have been played out already -- */ -- -- if (alsa_stream->period_size) { -- if ((alsa_stream->pos / alsa_stream->period_size) != -- ((alsa_stream->pos + consumed) / alsa_stream->period_size)) -- new_period = 1; -- } -- audio_debug("updating pos cur: %d + %d max:%d period_bytes:%d, hw_ptr: %d new_period:%d\n", -- alsa_stream->pos, -- consumed, -- alsa_stream->buffer_size, -- (int) (alsa_stream->period_size * alsa_stream->substream->runtime->periods), -- frames_to_bytes(alsa_stream->substream->runtime, alsa_stream->substream->runtime->status->hw_ptr), -- new_period); -- if (alsa_stream->buffer_size) { -- alsa_stream->pos += consumed & ~(1 << 30); -- alsa_stream->pos %= alsa_stream->buffer_size; -+ if (bytes >= alsa_stream->buffer_size) { -+ snd_pcm_stream_lock(substream); -+ snd_pcm_stop(substream, -+ alsa_stream->draining ? -+ SNDRV_PCM_STATE_SETUP : -+ SNDRV_PCM_STATE_XRUN); -+ snd_pcm_stream_unlock(substream); -+ return; - } - -- if (alsa_stream->substream) { -- if (new_period) -- snd_pcm_period_elapsed(alsa_stream->substream); -- } else { -- audio_warning(" unexpected NULL substream\n"); -+ pos = atomic_read(&alsa_stream->pos); -+ pos += bytes; -+ pos %= alsa_stream->buffer_size; -+ atomic_set(&alsa_stream->pos, pos); -+ -+ alsa_stream->period_offset += bytes; -+ if (alsa_stream->period_offset >= alsa_stream->period_size) { -+ alsa_stream->period_offset %= alsa_stream->period_size; -+ snd_pcm_period_elapsed(substream); - } - } - -@@ -246,7 +240,8 @@ static int snd_bcm2835_pcm_prepare(struc - - alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); - alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); -- alsa_stream->pos = 0; -+ atomic_set(&alsa_stream->pos, 0); -+ alsa_stream->period_offset = 0; - alsa_stream->draining = false; - - return 0; -@@ -283,7 +278,7 @@ static int snd_bcm2835_pcm_trigger(struc - return bcm2835_audio_start(alsa_stream); - case SNDRV_PCM_TRIGGER_DRAIN: - alsa_stream->draining = true; -- return 0; -+ return bcm2835_audio_drain(alsa_stream); - case SNDRV_PCM_TRIGGER_STOP: - return bcm2835_audio_stop(alsa_stream); - default: -@@ -300,7 +295,7 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s - - return snd_pcm_indirect_playback_pointer(substream, - &alsa_stream->pcm_indirect, -- alsa_stream->pos); -+ atomic_read(&alsa_stream->pos)); - } - - /* operators */ -@@ -338,6 +333,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_c - if (err < 0) - return err; - pcm->private_data = chip; -+ pcm->nonatomic = true; - strcpy(pcm->name, "bcm2835 ALSA"); - chip->pcm = pcm; - chip->dest = AUDIO_DEST_AUTO; -@@ -367,6 +363,7 @@ int snd_bcm2835_new_spdif_pcm(struct bcm - return err; - - pcm->private_data = chip; -+ pcm->nonatomic = true; - strcpy(pcm->name, "bcm2835 IEC958/HDMI"); - chip->pcm_spdif = pcm; - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, -@@ -395,6 +392,7 @@ int snd_bcm2835_new_simple_pcm(struct bc - return err; - - pcm->private_data = chip; -+ pcm->nonatomic = true; - strcpy(pcm->name, name); - chip->pcm = pcm; - chip->dest = route; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -26,10 +26,6 @@ - - /* ---- Private Constants and Types ------------------------------------------ */ - --#define BCM2835_AUDIO_STOP 0 --#define BCM2835_AUDIO_START 1 --#define BCM2835_AUDIO_WRITE 2 -- - /* Logging macros (for remapping to other logging mechanisms, i.e., printf) */ - #ifdef AUDIO_DEBUG_ENABLE - #define LOG_ERR(fmt, arg...) pr_err("%s:%d " fmt, __func__, __LINE__, ##arg) -@@ -55,17 +51,6 @@ struct bcm2835_audio_instance { - - static bool force_bulk; - --/* ---- Private Variables ---------------------------------------------------- */ -- --/* ---- Private Function Prototypes ------------------------------------------ */ -- --/* ---- Private Functions ---------------------------------------------------- */ -- --static int bcm2835_audio_stop_worker(struct bcm2835_alsa_stream *alsa_stream); --static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream); --static int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream, -- unsigned int count, void *src); -- - static void bcm2835_audio_lock(struct bcm2835_audio_instance *instance) - { - mutex_lock(&instance->vchi_mutex); -@@ -135,108 +120,6 @@ static const u32 BCM2835_AUDIO_WRITE_COO - static const u32 BCM2835_AUDIO_WRITE_COOKIE2 = ('D' << 24 | 'A' << 16 | - 'T' << 8 | 'A'); - --struct bcm2835_audio_work { -- struct work_struct my_work; -- struct bcm2835_alsa_stream *alsa_stream; -- int cmd; -- void *src; -- unsigned int count; --}; -- --static void my_wq_function(struct work_struct *work) --{ -- struct bcm2835_audio_work *w = -- container_of(work, struct bcm2835_audio_work, my_work); -- int ret = -9; -- -- switch (w->cmd) { -- case BCM2835_AUDIO_START: -- ret = bcm2835_audio_start_worker(w->alsa_stream); -- break; -- case BCM2835_AUDIO_STOP: -- ret = bcm2835_audio_stop_worker(w->alsa_stream); -- break; -- case BCM2835_AUDIO_WRITE: -- ret = bcm2835_audio_write_worker(w->alsa_stream, w->count, -- w->src); -- break; -- default: -- LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->cmd); -- break; -- } -- kfree((void *)work); --} -- --int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream) --{ -- struct bcm2835_audio_work *work; -- -- work = kmalloc(sizeof(*work), GFP_ATOMIC); -- /*--- Queue some work (item 1) ---*/ -- if (!work) { -- LOG_ERR(" .. Error: NULL work kmalloc\n"); -- return -ENOMEM; -- } -- INIT_WORK(&work->my_work, my_wq_function); -- work->alsa_stream = alsa_stream; -- work->cmd = BCM2835_AUDIO_START; -- if (!queue_work(alsa_stream->my_wq, &work->my_work)) { -- kfree(work); -- return -EBUSY; -- } -- return 0; --} -- --int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream) --{ -- struct bcm2835_audio_work *work; -- -- work = kmalloc(sizeof(*work), GFP_ATOMIC); -- /*--- Queue some work (item 1) ---*/ -- if (!work) { -- LOG_ERR(" .. Error: NULL work kmalloc\n"); -- return -ENOMEM; -- } -- INIT_WORK(&work->my_work, my_wq_function); -- work->alsa_stream = alsa_stream; -- work->cmd = BCM2835_AUDIO_STOP; -- if (!queue_work(alsa_stream->my_wq, &work->my_work)) { -- kfree(work); -- return -EBUSY; -- } -- return 0; --} -- --int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream, -- unsigned int count, void *src) --{ -- struct bcm2835_audio_work *work; -- -- work = kmalloc(sizeof(*work), GFP_ATOMIC); -- /*--- Queue some work (item 1) ---*/ -- if (!work) { -- LOG_ERR(" .. Error: NULL work kmalloc\n"); -- return -ENOMEM; -- } -- INIT_WORK(&work->my_work, my_wq_function); -- work->alsa_stream = alsa_stream; -- work->cmd = BCM2835_AUDIO_WRITE; -- work->src = src; -- work->count = count; -- if (!queue_work(alsa_stream->my_wq, &work->my_work)) { -- kfree(work); -- return -EBUSY; -- } -- return 0; --} -- --static void my_workqueue_quit(struct bcm2835_alsa_stream *alsa_stream) --{ -- flush_workqueue(alsa_stream->my_wq); -- destroy_workqueue(alsa_stream->my_wq); -- alsa_stream->my_wq = NULL; --} -- - static void audio_vchi_callback(void *param, - const VCHI_CALLBACK_REASON_T reason, - void *msg_handle) -@@ -249,47 +132,27 @@ static void audio_vchi_callback(void *pa - if (reason != VCHI_CALLBACK_MSG_AVAILABLE) - return; - -- if (!instance) { -- LOG_ERR(" .. instance is null\n"); -- BUG(); -- return; -- } -- if (!instance->vchi_handle) { -- LOG_ERR(" .. instance->vchi_handle is null\n"); -- BUG(); -- return; -- } - status = vchi_msg_dequeue(instance->vchi_handle, - &m, sizeof(m), &msg_len, VCHI_FLAGS_NONE); - if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { -- LOG_DBG(" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n", -- instance, m.u.result.success); - instance->result = m.u.result.success; - complete(&instance->msg_avail_comp); - } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { -- struct bcm2835_alsa_stream *alsa_stream = instance->alsa_stream; -- -- LOG_DBG(" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n", -- instance, m.u.complete.count); - if (m.u.complete.cookie1 != BCM2835_AUDIO_WRITE_COOKIE1 || - m.u.complete.cookie2 != BCM2835_AUDIO_WRITE_COOKIE2) -- LOG_ERR(" .. response is corrupt\n"); -- else if (alsa_stream) { -- atomic_add(m.u.complete.count, -- &alsa_stream->retrieved); -- bcm2835_playback_fifo(alsa_stream); -- } else { -- LOG_ERR(" .. unexpected alsa_stream=%p\n", -- alsa_stream); -- } -+ LOG_ERR("invalid cookie\n"); -+ else -+ bcm2835_playback_fifo(instance->alsa_stream, -+ m.u.complete.count); - } else { -- LOG_ERR(" .. unexpected m.type=%d\n", m.type); -+ LOG_ERR("unexpected callback type=%d\n", m.type); - } - } - --static struct bcm2835_audio_instance * -+static int - vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance, -- VCHI_CONNECTION_T *vchi_connection) -+ VCHI_CONNECTION_T *vchi_connection, -+ struct bcm2835_audio_instance *instance) - { - SERVICE_CREATION_T params = { - .version = VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER), -@@ -298,23 +161,14 @@ vc_vchi_audio_init(VCHI_INSTANCE_T vchi_ - .rx_fifo_size = 0, - .tx_fifo_size = 0, - .callback = audio_vchi_callback, -+ .callback_param = instance, - .want_unaligned_bulk_rx = 1, //TODO: remove VCOS_FALSE - .want_unaligned_bulk_tx = 1, //TODO: remove VCOS_FALSE - .want_crc = 0 - }; -- struct bcm2835_audio_instance *instance; - int status; - -- /* Allocate memory for this instance */ -- instance = kzalloc(sizeof(*instance), GFP_KERNEL); -- if (!instance) -- return ERR_PTR(-ENOMEM); -- -- /* Create a lock for exclusive, serialized VCHI connection access */ -- mutex_init(&instance->vchi_mutex); - /* Open the VCHI service connections */ -- params.callback_param = instance, -- - status = vchi_service_open(vchi_instance, ¶ms, - &instance->vchi_handle); - -@@ -322,16 +176,16 @@ vc_vchi_audio_init(VCHI_INSTANCE_T vchi_ - LOG_ERR("%s: failed to open VCHI service connection (status=%d)\n", - __func__, status); - kfree(instance); -- return ERR_PTR(-EPERM); -+ return -EPERM; - } - - /* Finished with the service for now */ - vchi_service_release(instance->vchi_handle); - -- return instance; -+ return 0; - } - --static int vc_vchi_audio_deinit(struct bcm2835_audio_instance *instance) -+static void vc_vchi_audio_deinit(struct bcm2835_audio_instance *instance) - { - int status; - -@@ -346,10 +200,6 @@ static int vc_vchi_audio_deinit(struct b - } - - mutex_unlock(&instance->vchi_mutex); -- -- kfree(instance); -- -- return 0; - } - - int bcm2835_new_vchi_ctx(struct bcm2835_vchi_ctx *vchi_ctx) -@@ -387,39 +237,25 @@ void bcm2835_free_vchi_ctx(struct bcm283 - vchi_ctx->vchi_instance = NULL; - } - --static int bcm2835_audio_open_connection(struct bcm2835_alsa_stream *alsa_stream) --{ -- struct bcm2835_audio_instance *instance = -- (struct bcm2835_audio_instance *)alsa_stream->instance; -- struct bcm2835_vchi_ctx *vhci_ctx = alsa_stream->chip->vchi_ctx; -- -- /* Initialize an instance of the audio service */ -- instance = vc_vchi_audio_init(vhci_ctx->vchi_instance, -- vhci_ctx->vchi_connection); -- -- if (IS_ERR(instance)) -- return PTR_ERR(instance); -- -- instance->alsa_stream = alsa_stream; -- alsa_stream->instance = instance; -- -- return 0; --} -- - int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream) - { -+ struct bcm2835_vchi_ctx *vchi_ctx = alsa_stream->chip->vchi_ctx; - struct bcm2835_audio_instance *instance; - int err; - -- alsa_stream->my_wq = alloc_workqueue("my_queue", WQ_HIGHPRI, 1); -- if (!alsa_stream->my_wq) -+ /* Allocate memory for this instance */ -+ instance = kzalloc(sizeof(*instance), GFP_KERNEL); -+ if (!instance) - return -ENOMEM; -+ mutex_init(&instance->vchi_mutex); -+ instance->alsa_stream = alsa_stream; -+ alsa_stream->instance = instance; - -- err = bcm2835_audio_open_connection(alsa_stream); -+ err = vc_vchi_audio_init(vchi_ctx->vchi_instance, -+ vchi_ctx->vchi_connection, -+ instance); - if (err < 0) -- goto free_wq; -- -- instance = alsa_stream->instance; -+ goto free_instance; - - err = bcm2835_audio_send_simple(instance, VC_AUDIO_MSG_TYPE_OPEN, - false); -@@ -438,8 +274,9 @@ int bcm2835_audio_open(struct bcm2835_al - - deinit: - vc_vchi_audio_deinit(instance); -- free_wq: -- destroy_workqueue(alsa_stream->my_wq); -+ free_instance: -+ alsa_stream->instance = NULL; -+ kfree(instance); - return err; - } - -@@ -478,37 +315,46 @@ int bcm2835_audio_set_params(struct bcm2 - return bcm2835_audio_send_msg(alsa_stream->instance, &m, true); - } - --static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream) -+int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream) - { - return bcm2835_audio_send_simple(alsa_stream->instance, - VC_AUDIO_MSG_TYPE_START, false); - } - --static int bcm2835_audio_stop_worker(struct bcm2835_alsa_stream *alsa_stream) -+int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream) - { - return bcm2835_audio_send_simple(alsa_stream->instance, - VC_AUDIO_MSG_TYPE_STOP, false); - } - -+int bcm2835_audio_drain(struct bcm2835_alsa_stream *alsa_stream) -+{ -+ struct vc_audio_msg m = { -+ .type = VC_AUDIO_MSG_TYPE_STOP, -+ .u.stop.draining = 1, -+ }; -+ -+ return bcm2835_audio_send_msg(alsa_stream->instance, &m, false); -+} -+ - int bcm2835_audio_close(struct bcm2835_alsa_stream *alsa_stream) - { - struct bcm2835_audio_instance *instance = alsa_stream->instance; - int err; - -- my_workqueue_quit(alsa_stream); -- - err = bcm2835_audio_send_simple(alsa_stream->instance, - VC_AUDIO_MSG_TYPE_CLOSE, true); - - /* Stop the audio service */ - vc_vchi_audio_deinit(instance); - alsa_stream->instance = NULL; -+ kfree(instance); - - return err; - } - --static int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream, -- unsigned int size, void *src) -+int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream, -+ unsigned int size, void *src) - { - struct bcm2835_audio_instance *instance = alsa_stream->instance; - struct vc_audio_msg m = { -@@ -558,13 +404,5 @@ static int bcm2835_audio_write_worker(st - return err; - } - --unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream) --{ -- unsigned int count = atomic_read(&alsa_stream->retrieved); -- -- atomic_sub(count, &alsa_stream->retrieved); -- return count; --} -- - module_param(force_bulk, bool, 0444); - MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio"); ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -121,13 +121,12 @@ struct bcm2835_alsa_stream { - - int draining; - -- unsigned int pos; -+ atomic_t pos; -+ unsigned int period_offset; - unsigned int buffer_size; - unsigned int period_size; - -- atomic_t retrieved; - struct bcm2835_audio_instance *instance; -- struct workqueue_struct *my_wq; - int idx; - }; - -@@ -152,11 +151,13 @@ int bcm2835_audio_set_params(struct bcm2 - unsigned int bps); - int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream); - int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream); -+int bcm2835_audio_drain(struct bcm2835_alsa_stream *alsa_stream); - int bcm2835_audio_set_ctls(struct bcm2835_alsa_stream *alsa_stream); - int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream, - unsigned int count, - void *src); --void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream); -+void bcm2835_playback_fifo(struct bcm2835_alsa_stream *alsa_stream, -+ unsigned int size); - unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream); - - #endif /* __SOUND_ARM_BCM2835_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0454-overlays-Remove-upstream-aux-interrupt-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0454-overlays-Remove-upstream-aux-interrupt-overlay.patch new file mode 100644 index 0000000000..c6e54f3fda --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0454-overlays-Remove-upstream-aux-interrupt-overlay.patch @@ -0,0 +1,97 @@ +From 2b584d25f295e07ef58efc2a60057be58015d693 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 7 May 2019 10:06:04 +0100 +Subject: [PATCH] overlays: Remove upstream-aux-interrupt overlay + +We no longer have a downstream-specific auxilliary interrupt +driver, so the overlay to disable it is no longer needed. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 - + arch/arm/boot/dts/overlays/README | 12 +++---- + .../upstream-aux-interrupt-overlay.dts | 33 ------------------- + .../boot/dts/overlays/upstream-overlay.dts | 2 +- + 4 files changed, 6 insertions(+), 42 deletions(-) + delete mode 100644 arch/arm/boot/dts/overlays/upstream-aux-interrupt-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -151,7 +151,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + uart1.dtbo \ + udrc.dtbo \ + upstream.dtbo \ +- upstream-aux-interrupt.dtbo \ + vc4-fkms-v3d.dtbo \ + vc4-kms-kippah-7inch.dtbo \ + vc4-kms-v3d.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -2206,18 +2206,16 @@ Params: alsaname Name of + + + Name: upstream +-Info: Allow usage of downstream .dtb with upstream kernel. Comprises +- vc4-kms-v3d, dwc2 and upstream-aux-interrupt overlays. ++Info: Allow usage of downstream .dtb with upstream kernel. Comprises the ++ vc4-kms-v3d and dwc2 overlays. + Load: dtoverlay=upstream + Params: + + + Name: upstream-aux-interrupt +-Info: Allow usage of downstream .dtb with upstream kernel by binding AUX +- devices directly to the shared AUX interrupt line. One of the parts +- of the 'upstream' overlay +-Load: dtoverlay=upstream-aux-interrupt +-Params: ++Info: This overlay has been deprecated and removed because it is no longer ++ necessary. ++Load: + + + Name: vc4-fkms-v3d +--- a/arch/arm/boot/dts/overlays/upstream-aux-interrupt-overlay.dts ++++ /dev/null +@@ -1,33 +0,0 @@ +-// Overlay for missing AUX interrupt controller +-// Instead we bind all AUX devices to the generic AUX interrupt line +-/dts-v1/; +-/plugin/; +- +-/ { +- compatible = "brcm,bcm2708"; +- +- fragment@0 { +- target = <&uart1>; +- __overlay__ { +- interrupt-parent = <&intc>; +- interrupts = <0x1 0x1d>; +- }; +- }; +- +- fragment@1 { +- target = <&spi1>; +- __overlay__ { +- interrupt-parent = <&intc>; +- interrupts = <0x1 0x1d>; +- }; +- }; +- +- fragment@2 { +- target = <&spi2>; +- __overlay__ { +- interrupt-parent = <&intc>; +- interrupts = <0x1 0x1d>; +- }; +- }; +-}; +- +--- a/arch/arm/boot/dts/overlays/upstream-overlay.dts ++++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts +@@ -1,4 +1,4 @@ +-// redo: ovmerge -c vc4-kms-v3d-overlay.dts,cma-96 dwc2-overlay.dts,dr_mode=otg upstream-aux-interrupt-overlay.dts, ++// redo: ovmerge -c vc4-kms-v3d-overlay.dts,cma-96 dwc2-overlay.dts,dr_mode=otg + + /dts-v1/; + /plugin/; diff --git a/target/linux/brcm2708/patches-4.19/950-0454-staging-bcm2835-audio-Use-card-private_data.patch b/target/linux/brcm2708/patches-4.19/950-0454-staging-bcm2835-audio-Use-card-private_data.patch deleted file mode 100644 index ba6a5b58b0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0454-staging-bcm2835-audio-Use-card-private_data.patch +++ /dev/null @@ -1,138 +0,0 @@ -From af0ded6e9dd38f08a9ee621066e583b5cf972926 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:50 +0200 -Subject: [PATCH 454/806] staging: bcm2835-audio: Use card->private_data - -commit 898001a0c845cefe5d47d133485712412853f0a8 upstream. - -Instead of allocating a separate snd_device object, let snd_card_new() -allocate the private resource. This simplifies the code. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835.c | 91 +++---------------- - 1 file changed, 13 insertions(+), 78 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -86,9 +86,6 @@ static int bcm2835_devm_add_vchi_ctx(str - - static void snd_bcm2835_release(struct device *dev) - { -- struct bcm2835_chip *chip = dev_get_drvdata(dev); -- -- kfree(chip); - } - - static struct device * -@@ -117,69 +114,6 @@ snd_create_device(struct device *parent, - return device; - } - --/* component-destructor -- * (see "Management of Cards and Components") -- */ --static int snd_bcm2835_dev_free(struct snd_device *device) --{ -- struct bcm2835_chip *chip = device->device_data; -- struct snd_card *card = chip->card; -- -- snd_device_free(card, chip); -- -- return 0; --} -- --/* chip-specific constructor -- * (see "Management of Cards and Components") -- */ --static int snd_bcm2835_create(struct snd_card *card, -- struct bcm2835_chip **rchip) --{ -- struct bcm2835_chip *chip; -- int err; -- static struct snd_device_ops ops = { -- .dev_free = snd_bcm2835_dev_free, -- }; -- -- *rchip = NULL; -- -- chip = kzalloc(sizeof(*chip), GFP_KERNEL); -- if (!chip) -- return -ENOMEM; -- -- chip->card = card; -- mutex_init(&chip->audio_mutex); -- -- chip->vchi_ctx = devres_find(card->dev->parent, -- bcm2835_devm_free_vchi_ctx, NULL, NULL); -- if (!chip->vchi_ctx) { -- kfree(chip); -- return -ENODEV; -- } -- -- err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); -- if (err) { -- kfree(chip); -- return err; -- } -- -- *rchip = chip; -- return 0; --} -- --static struct snd_card *snd_bcm2835_card_new(struct device *dev) --{ -- struct snd_card *card; -- int ret; -- -- ret = snd_card_new(dev, -1, NULL, THIS_MODULE, 0, &card); -- if (ret) -- return ERR_PTR(ret); -- -- return card; --} -- - typedef int (*bcm2835_audio_newpcm_func)(struct bcm2835_chip *chip, - const char *name, - enum snd_bcm2835_route route, -@@ -292,25 +226,26 @@ static int snd_add_child_device(struct d - return PTR_ERR(child); - } - -- card = snd_bcm2835_card_new(child); -- if (IS_ERR(card)) { -+ err = snd_card_new(child, -1, NULL, THIS_MODULE, sizeof(*chip), &card); -+ if (err < 0) { - dev_err(child, "Failed to create card"); -- return PTR_ERR(card); -+ return err; - } - -- snd_card_set_dev(card, child); -+ chip = card->private_data; -+ chip->card = card; -+ chip->dev = child; -+ mutex_init(&chip->audio_mutex); -+ -+ chip->vchi_ctx = devres_find(device, -+ bcm2835_devm_free_vchi_ctx, NULL, NULL); -+ if (!chip->vchi_ctx) -+ return -ENODEV; -+ - strcpy(card->driver, audio_driver->driver.name); - strcpy(card->shortname, audio_driver->shortname); - strcpy(card->longname, audio_driver->longname); - -- err = snd_bcm2835_create(card, &chip); -- if (err) { -- dev_err(child, "Failed to create chip, error %d\n", err); -- return err; -- } -- -- chip->dev = child; -- - err = audio_driver->newpcm(chip, audio_driver->shortname, - audio_driver->route, - numchans); diff --git a/target/linux/brcm2708/patches-4.19/950-0455-overlays-Standardise-on-compatible-brcm-bcm2835.patch b/target/linux/brcm2708/patches-4.19/950-0455-overlays-Standardise-on-compatible-brcm-bcm2835.patch new file mode 100644 index 0000000000..b1f95e3445 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0455-overlays-Standardise-on-compatible-brcm-bcm2835.patch @@ -0,0 +1,1767 @@ +From ba6646d6bc62108f33a7a3e95367534a0a634beb Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 14 May 2019 13:33:05 +0100 +Subject: [PATCH] overlays: Standardise on compatible="brcm,bcm2835" + +Curb the proliferation of compatible string combinations by +standardising on "brcm,bcm2835" to denote BCM2835 and its descendants. + +As nothing in the firmware or kernel is checking overlay compatible +strings, this should be a purely cosmetic change. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/ads1015-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/ads1115-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/ads7846-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/adv7282m-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/adv728x-m-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts | 2 +- + .../boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/allo-digione-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts | 2 +- + .../boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts | 2 +- + .../dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/applepi-dac-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/at86rf233-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts | 2 +- + .../boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/audremap-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/balena-fin-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/dht11-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/dpi18-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/dpi24-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/draws-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/dwc-otg-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/dwc2-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/enc28j60-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/exc3000-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/goodix-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/gpio-fan-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/gpio-ir-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/gpio-key-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/hy28a-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/hy28b-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c-mux-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/ilitek251x-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts | 2 +- + .../arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/justboom-dac-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/justboom-digi-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/max98357a-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mbed-dac-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mcp23s17-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mcp3008-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mcp3202-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mcp342x-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/media-center-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mmc-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mpu6050-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/mz61581-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/ov5647-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/papirus-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pibell-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/piglow-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/piscreen-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/piscreen2r-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pisound-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pitft22-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pps-gpio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/qca7000-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rpi-dac-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rpi-display-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rpi-poe-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rpi-proto-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rpi-sense-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/rpi-tv-overlay.dts | 2 +- + .../arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/sdhost-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/sdio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/sdtweak-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/smi-nand-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/smi-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi-rtc-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi0-cs-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/ssd1306-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/superaudioboard-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/sx150x-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/tc358743-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/tinylcd35-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/uart0-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/uart1-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/udrc-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/upstream-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/vga666-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/w1-gpio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/wittypi-overlay.dts | 2 +- + 146 files changed, 146 insertions(+), 146 deletions(-) + +--- a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c>; +--- a/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/ads1015-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ads1015-overlay.dts +@@ -5,7 +5,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + /* ----------- ADS1015 ------------ */ + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/ads1115-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ads1115-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/ads7846-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ads7846-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_vc>; +--- a/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts +@@ -5,7 +5,7 @@ + #include "adv7282m-overlay.dts" + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + // Fragment numbers deliberately high to avoid conflicts with the + // included adv7282m overlay file. +--- a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/clocks"; +--- a/arch/arm/boot/dts/overlays/allo-digione-overlay.dts ++++ b/arch/arm/boot/dts/overlays/allo-digione-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts +@@ -13,7 +13,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&sound>; +--- a/arch/arm/boot/dts/overlays/at86rf233-overlay.dts ++++ b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts +@@ -4,7 +4,7 @@ + /* Overlay for Atmel AT86RF233 IEEE 802.15.4 WPAN transceiver on spi0.0 */ + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts ++++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts ++++ b/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts +@@ -5,7 +5,7 @@ + #include + + / { +- compatible = "brcm,bcm2837", "brcm,bcm2836", "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/audremap-overlay.dts ++++ b/arch/arm/boot/dts/overlays/audremap-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&audio_pins>; +--- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts ++++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&mmc>; +--- a/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts ++++ b/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/dht11-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dht11-overlay.dts +@@ -5,7 +5,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts +@@ -8,7 +8,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts +@@ -9,7 +9,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&sound>; +--- a/arch/arm/boot/dts/overlays/dpi18-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + // There is no DPI driver module, but we need a platform device + // node (that doesn't already use pinctrl) to hang the pinctrl +--- a/arch/arm/boot/dts/overlays/dpi24-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + // There is no DPI driver module, but we need a platform device + // node (that doesn't already use pinctrl) to hang the pinctrl +--- a/arch/arm/boot/dts/overlays/draws-overlay.dts ++++ b/arch/arm/boot/dts/overlays/draws-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + fragment@0 { + target = <&i2s>; + __overlay__ { +--- a/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&usb>; +--- a/arch/arm/boot/dts/overlays/dwc2-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&usb>; +--- a/arch/arm/boot/dts/overlays/enc28j60-overlay.dts ++++ b/arch/arm/boot/dts/overlays/enc28j60-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts ++++ b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi2>; +--- a/arch/arm/boot/dts/overlays/exc3000-overlay.dts ++++ b/arch/arm/boot/dts/overlays/exc3000-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&clocks>; +--- a/arch/arm/boot/dts/overlays/goodix-overlay.dts ++++ b/arch/arm/boot/dts/overlays/goodix-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts ++++ b/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts +@@ -38,7 +38,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/gpio-key-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-key-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + // Configure the gpio pin controller +--- a/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts +@@ -10,7 +10,7 @@ + // note that GPIO3 has an external pullup on at least some boards). + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + // Configure the gpio pin controller +--- a/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/clocks"; +--- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/clocks"; +--- a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/hy28a-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hy28a-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/hy28b-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hy28b-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&sound>; +--- a/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts +@@ -9,7 +9,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c0>; +--- a/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts +@@ -9,7 +9,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c1>; +--- a/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s_pins>; +--- a/arch/arm/boot/dts/overlays/ilitek251x-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ilitek251x-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts ++++ b/arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts +@@ -13,7 +13,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + // disable spi-dev on spi0.0 + fragment@0 { +--- a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/max98357a-overlay.dts ++++ b/arch/arm/boot/dts/overlays/max98357a-overlay.dts +@@ -8,7 +8,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + /* Enable I2S */ + fragment@0 { +--- a/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c1>; +--- a/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts +@@ -20,7 +20,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + // disable spi-dev on spi0.0 + fragment@0 { +--- a/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + /* disable spi-dev for spi0.0 */ + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + /* disable spi-dev for spi0.1 */ + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/mcp3008-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spidev0>; +--- a/arch/arm/boot/dts/overlays/mcp3202-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp3202-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spidev0>; +--- a/arch/arm/boot/dts/overlays/mcp342x-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp342x-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c1>; +--- a/arch/arm/boot/dts/overlays/media-center-overlay.dts ++++ b/arch/arm/boot/dts/overlays/media-center-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/mmc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&mmc>; +--- a/arch/arm/boot/dts/overlays/mpu6050-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mpu6050-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c1>; +--- a/arch/arm/boot/dts/overlays/mz61581-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mz61581-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_vc>; +--- a/arch/arm/boot/dts/overlays/papirus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/papirus-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts +@@ -11,7 +11,7 @@ + */ + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&act_led>; +--- a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts +@@ -9,7 +9,7 @@ + */ + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&uart1>; +--- a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&mmc>; +--- a/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts +@@ -16,7 +16,7 @@ + */ + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&uart0>; +--- a/arch/arm/boot/dts/overlays/pibell-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pibell-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/piglow-overlay.dts ++++ b/arch/arm/boot/dts/overlays/piglow-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/piscreen-overlay.dts ++++ b/arch/arm/boot/dts/overlays/piscreen-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts ++++ b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/pisound-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts +@@ -23,7 +23,7 @@ + #include + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/pitft22-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pitft22-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + fragment@0 { + target-path = "/"; + __overlay__ { +--- a/arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/qca7000-overlay.dts ++++ b/arch/arm/boot/dts/overlays/qca7000-overlay.dts +@@ -5,7 +5,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spidev0>; +--- a/arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts +@@ -6,7 +6,7 @@ + #include + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/rpi-display-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts +@@ -5,7 +5,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c1>; +--- a/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spidev0>; +--- a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_arm>; +--- a/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/sdhost-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts +@@ -4,7 +4,7 @@ + /* Provide backwards compatible aliases for the old sdhost dtparams. */ + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&sdhost>; +--- a/arch/arm/boot/dts/overlays/sdio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts +@@ -4,7 +4,7 @@ + /* Enable SDIO from MMC interface via GPIOs 22-27. Includes sdhost overlay. */ + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&mmc>; +--- a/arch/arm/boot/dts/overlays/sdtweak-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts +@@ -4,7 +4,7 @@ + /* Provide backwards compatible aliases for the old sdhost dtparams. */ + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&sdhost>; +--- a/arch/arm/boot/dts/overlays/smi-nand-overlay.dts ++++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&smi>; +--- a/arch/arm/boot/dts/overlays/smi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/smi-overlay.dts +@@ -5,7 +5,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&smi>; +--- a/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spidev0>; +--- a/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts +@@ -3,7 +3,7 @@ + + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0_cs_pins>; +--- a/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts +@@ -3,7 +3,7 @@ + + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts +@@ -3,7 +3,7 @@ + + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts +@@ -3,7 +3,7 @@ + + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts +@@ -3,7 +3,7 @@ + + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts +@@ -3,7 +3,7 @@ + + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts ++++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts +@@ -3,7 +3,7 @@ + + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&gpio>; +--- a/arch/arm/boot/dts/overlays/ssd1306-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ssd1306-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2718"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c1>; +--- a/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts ++++ b/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&sound>; +--- a/arch/arm/boot/dts/overlays/sx150x-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sx150x-overlay.dts +@@ -22,7 +22,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + // Enable I2C#0 interface + fragment@0 { +--- a/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts +@@ -5,7 +5,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/tc358743-overlay.dts ++++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts +@@ -4,7 +4,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2c_vc>; +--- a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts ++++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts +@@ -24,7 +24,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts ++++ b/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts +@@ -8,7 +8,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&spi0>; +--- a/arch/arm/boot/dts/overlays/uart0-overlay.dts ++++ b/arch/arm/boot/dts/overlays/uart0-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&uart0>; +--- a/arch/arm/boot/dts/overlays/uart1-overlay.dts ++++ b/arch/arm/boot/dts/overlays/uart1-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&uart1>; +--- a/arch/arm/boot/dts/overlays/udrc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/udrc-overlay.dts +@@ -7,7 +7,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + fragment@0 { + target = <&i2s>; + __overlay__ { +--- a/arch/arm/boot/dts/overlays/upstream-overlay.dts ++++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts +@@ -6,7 +6,7 @@ + #include + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + fragment@0 { + target-path = "/chosen"; + __dormant__ { +--- a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts +@@ -6,7 +6,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/chosen"; +--- a/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts +@@ -8,7 +8,7 @@ + #include + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -8,7 +8,7 @@ + #include + + / { +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/chosen"; +--- a/arch/arm/boot/dts/overlays/vga666-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vga666-overlay.dts +@@ -2,7 +2,7 @@ + /plugin/; + + /{ +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + // There is no VGA driver module, but we need a platform device + // node (that doesn't already use pinctrl) to hang the pinctrl +--- a/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts ++++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/"; +--- a/arch/arm/boot/dts/overlays/wittypi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/wittypi-overlay.dts +@@ -8,7 +8,7 @@ + + / { + +- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&leds>; diff --git a/target/linux/brcm2708/patches-4.19/950-0455-staging-bcm2835-audio-Use-standard-error-print-helpe.patch b/target/linux/brcm2708/patches-4.19/950-0455-staging-bcm2835-audio-Use-standard-error-print-helpe.patch deleted file mode 100644 index 14dd044d1c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0455-staging-bcm2835-audio-Use-standard-error-print-helpe.patch +++ /dev/null @@ -1,237 +0,0 @@ -From ec788d7c115d3ec59b39b6aac17d57ad86b7fbfe Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:51 +0200 -Subject: [PATCH 455/806] staging: bcm2835-audio: Use standard error print - helpers - -commit b7584b64168208ebc14160770c0966b8b12fc16b upstream. - -For making the whole code more consistent, replace the home-made debug -print macros with the standard dev_err() & co. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 4 +- - .../bcm2835-audio/bcm2835-vchiq.c | 52 ++++++++----------- - .../vc04_services/bcm2835-audio/bcm2835.c | 2 +- - .../vc04_services/bcm2835-audio/bcm2835.h | 43 +-------------- - 4 files changed, 27 insertions(+), 74 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -101,8 +101,8 @@ static int snd_bcm2835_playback_open_gen - goto out; - } - if (idx >= MAX_SUBSTREAMS) { -- audio_error -- ("substream(%d) device doesn't exist max(%d) substreams allowed\n", -+ dev_err(chip->dev, -+ "substream(%d) device doesn't exist max(%d) substreams allowed\n", - idx, MAX_SUBSTREAMS); - err = -ENODEV; - goto out; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -26,20 +26,8 @@ - - /* ---- Private Constants and Types ------------------------------------------ */ - --/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */ --#ifdef AUDIO_DEBUG_ENABLE --#define LOG_ERR(fmt, arg...) pr_err("%s:%d " fmt, __func__, __LINE__, ##arg) --#define LOG_WARN(fmt, arg...) pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) --#define LOG_INFO(fmt, arg...) pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) --#define LOG_DBG(fmt, arg...) pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) --#else --#define LOG_ERR(fmt, arg...) pr_err("%s:%d " fmt, __func__, __LINE__, ##arg) --#define LOG_WARN(fmt, arg...) no_printk(fmt, ##arg) --#define LOG_INFO(fmt, arg...) no_printk(fmt, ##arg) --#define LOG_DBG(fmt, arg...) no_printk(fmt, ##arg) --#endif -- - struct bcm2835_audio_instance { -+ struct device *dev; - VCHI_SERVICE_HANDLE_T vchi_handle; - struct completion msg_avail_comp; - struct mutex vchi_mutex; -@@ -76,7 +64,8 @@ static int bcm2835_audio_send_msg_locked - status = vchi_queue_kernel_message(instance->vchi_handle, - m, sizeof(*m)); - if (status) { -- LOG_ERR("vchi message queue failed: %d, msg=%d\n", -+ dev_err(instance->dev, -+ "vchi message queue failed: %d, msg=%d\n", - status, m->type); - return -EIO; - } -@@ -84,10 +73,12 @@ static int bcm2835_audio_send_msg_locked - if (wait) { - if (!wait_for_completion_timeout(&instance->msg_avail_comp, - msecs_to_jiffies(10 * 1000))) { -- LOG_ERR("vchi message timeout, msg=%d\n", m->type); -+ dev_err(instance->dev, -+ "vchi message timeout, msg=%d\n", m->type); - return -ETIMEDOUT; - } else if (instance->result) { -- LOG_ERR("vchi message response error:%d, msg=%d\n", -+ dev_err(instance->dev, -+ "vchi message response error:%d, msg=%d\n", - instance->result, m->type); - return -EIO; - } -@@ -140,12 +131,12 @@ static void audio_vchi_callback(void *pa - } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { - if (m.u.complete.cookie1 != BCM2835_AUDIO_WRITE_COOKIE1 || - m.u.complete.cookie2 != BCM2835_AUDIO_WRITE_COOKIE2) -- LOG_ERR("invalid cookie\n"); -+ dev_err(instance->dev, "invalid cookie\n"); - else - bcm2835_playback_fifo(instance->alsa_stream, - m.u.complete.count); - } else { -- LOG_ERR("unexpected callback type=%d\n", m.type); -+ dev_err(instance->dev, "unexpected callback type=%d\n", m.type); - } - } - -@@ -173,8 +164,9 @@ vc_vchi_audio_init(VCHI_INSTANCE_T vchi_ - &instance->vchi_handle); - - if (status) { -- LOG_ERR("%s: failed to open VCHI service connection (status=%d)\n", -- __func__, status); -+ dev_err(instance->dev, -+ "failed to open VCHI service connection (status=%d)\n", -+ status); - kfree(instance); - return -EPERM; - } -@@ -195,30 +187,30 @@ static void vc_vchi_audio_deinit(struct - /* Close all VCHI service connections */ - status = vchi_service_close(instance->vchi_handle); - if (status) { -- LOG_DBG("%s: failed to close VCHI service connection (status=%d)\n", -- __func__, status); -+ dev_err(instance->dev, -+ "failed to close VCHI service connection (status=%d)\n", -+ status); - } - - mutex_unlock(&instance->vchi_mutex); - } - --int bcm2835_new_vchi_ctx(struct bcm2835_vchi_ctx *vchi_ctx) -+int bcm2835_new_vchi_ctx(struct device *dev, struct bcm2835_vchi_ctx *vchi_ctx) - { - int ret; - - /* Initialize and create a VCHI connection */ - ret = vchi_initialise(&vchi_ctx->vchi_instance); - if (ret) { -- LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n", -- __func__, ret); -- -+ dev_err(dev, "failed to initialise VCHI instance (ret=%d)\n", -+ ret); - return -EIO; - } - - ret = vchi_connect(NULL, 0, vchi_ctx->vchi_instance); - if (ret) { -- LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n", -- __func__, ret); -+ dev_dbg(dev, "failed to connect VCHI instance (ret=%d)\n", -+ ret); - - kfree(vchi_ctx->vchi_instance); - vchi_ctx->vchi_instance = NULL; -@@ -248,6 +240,7 @@ int bcm2835_audio_open(struct bcm2835_al - if (!instance) - return -ENOMEM; - mutex_init(&instance->vchi_mutex); -+ instance->dev = alsa_stream->chip->dev; - instance->alsa_stream = alsa_stream; - alsa_stream->instance = instance; - -@@ -394,7 +387,8 @@ int bcm2835_audio_write(struct bcm2835_a - } - - if (status) { -- LOG_ERR("failed on %d bytes transfer (status=%d)\n", -+ dev_err(instance->dev, -+ "failed on %d bytes transfer (status=%d)\n", - size, status); - err = -EIO; - } ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -73,7 +73,7 @@ static int bcm2835_devm_add_vchi_ctx(str - - memset(vchi_ctx, 0, sizeof(*vchi_ctx)); - -- ret = bcm2835_new_vchi_ctx(vchi_ctx); -+ ret = bcm2835_new_vchi_ctx(dev, vchi_ctx); - if (ret) { - devres_free(vchi_ctx); - return ret; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -17,47 +17,6 @@ - - #include "interface/vchi/vchi.h" - --/* -- * #define AUDIO_DEBUG_ENABLE -- * #define AUDIO_VERBOSE_DEBUG_ENABLE -- */ -- --/* Debug macros */ -- --#ifdef AUDIO_DEBUG_ENABLE --#ifdef AUDIO_VERBOSE_DEBUG_ENABLE -- --#define audio_debug(fmt, arg...) \ -- pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) -- --#define audio_info(fmt, arg...) \ -- pr_info("%s:%d " fmt, __func__, __LINE__, ##arg) -- --#else -- --#define audio_debug(fmt, arg...) -- --#define audio_info(fmt, arg...) -- --#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */ -- --#else -- --#define audio_debug(fmt, arg...) -- --#define audio_info(fmt, arg...) -- --#endif /* AUDIO_DEBUG_ENABLE */ -- --#define audio_error(fmt, arg...) \ -- pr_err("%s:%d " fmt, __func__, __LINE__, ##arg) -- --#define audio_warning(fmt, arg...) \ -- pr_warn("%s:%d " fmt, __func__, __LINE__, ##arg) -- --#define audio_alert(fmt, arg...) \ -- pr_alert("%s:%d " fmt, __func__, __LINE__, ##arg) -- - #define MAX_SUBSTREAMS (8) - #define AVAIL_SUBSTREAMS_MASK (0xff) - -@@ -141,7 +100,7 @@ int snd_bcm2835_new_simple_pcm(struct bc - int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip); - int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip); - --int bcm2835_new_vchi_ctx(struct bcm2835_vchi_ctx *vchi_ctx); -+int bcm2835_new_vchi_ctx(struct device *dev, struct bcm2835_vchi_ctx *vchi_ctx); - void bcm2835_free_vchi_ctx(struct bcm2835_vchi_ctx *vchi_ctx); - - int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream); diff --git a/target/linux/brcm2708/patches-4.19/950-0456-staging-bcm2835-audio-Remove-unnecessary-header-file.patch b/target/linux/brcm2708/patches-4.19/950-0456-staging-bcm2835-audio-Remove-unnecessary-header-file.patch deleted file mode 100644 index 171bca11fe..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0456-staging-bcm2835-audio-Remove-unnecessary-header-file.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 8deead340379eeb09571476e0412ce50036c08d1 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:52 +0200 -Subject: [PATCH 456/806] staging: bcm2835-audio: Remove unnecessary header - file includes - -commit 7e46fff5f19ce2b8a9891e4c08631c64d06e9e17 upstream. - -Yet a few header files are included unnecessarily. Drop them. - -Also remove trivial comments. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../bcm2835-audio/bcm2835-vchiq.c | 19 ------------------- - .../vc04_services/bcm2835-audio/bcm2835.h | 6 ------ - 2 files changed, 25 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -1,31 +1,12 @@ - // SPDX-License-Identifier: GPL-2.0 - /* Copyright 2011 Broadcom Corporation. All rights reserved. */ - --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include - #include --#include --#include - #include - #include -- - #include "bcm2835.h" -- --/* ---- Include Files -------------------------------------------------------- */ -- - #include "vc_vchi_audioserv_defs.h" - --/* ---- Private Constants and Types ------------------------------------------ */ -- - struct bcm2835_audio_instance { - struct device *dev; - VCHI_SERVICE_HANDLE_T vchi_handle; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -5,16 +5,10 @@ - #define __SOUND_ARM_BCM2835_H - - #include --#include --#include - #include - #include --#include - #include --#include - #include --#include -- - #include "interface/vchi/vchi.h" - - #define MAX_SUBSTREAMS (8) diff --git a/target/linux/brcm2708/patches-4.19/950-0456-vc4-Remove-interrupt-and-DMA-trampling.patch b/target/linux/brcm2708/patches-4.19/950-0456-vc4-Remove-interrupt-and-DMA-trampling.patch new file mode 100644 index 0000000000..34fe856ee0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0456-vc4-Remove-interrupt-and-DMA-trampling.patch @@ -0,0 +1,121 @@ +From 343e24f4a112e1118e955fd58316e71b208a22f3 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 22 May 2019 12:58:47 +0100 +Subject: [PATCH] vc4: Remove interrupt and DMA trampling + +As part of the effort to clean up the overlays, remove the interrupt +and DMA mask declarations from the vc4 overlays which just duplicate +that which is in the base DTBs. + +Signed-off-by: Phil Elwell +--- + .../boot/dts/overlays/vc4-fkms-v3d-overlay.dts | 8 -------- + .../boot/dts/overlays/vc4-kms-v3d-overlay.dts | 18 ++---------------- + 2 files changed, 2 insertions(+), 24 deletions(-) + +--- a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts +@@ -60,7 +60,6 @@ + fragment@7 { + target = <&v3d>; + __overlay__ { +- interrupts = <1 10>; + status = "okay"; + }; + }; +@@ -72,13 +71,6 @@ + }; + }; + +- fragment@9 { +- target-path = "/soc/dma"; +- __overlay__ { +- brcm,dma-channel-mask = <0x7f35>; +- }; +- }; +- + __overrides__ { + cma-256 = <0>,"+0-1-2-3-4"; + cma-192 = <0>,"-0+1-2-3-4"; +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -62,7 +62,6 @@ + fragment@7 { + target = <&pixelvalve0>; + __overlay__ { +- interrupts = <2 13>; /* pwa0 */ + status = "okay"; + }; + }; +@@ -70,7 +69,6 @@ + fragment@8 { + target = <&pixelvalve1>; + __overlay__ { +- interrupts = <2 14>; /* pwa1 */ + status = "okay"; + }; + }; +@@ -78,7 +76,6 @@ + fragment@9 { + target = <&pixelvalve2>; + __overlay__ { +- interrupts = <2 10>; /* pixelvalve */ + status = "okay"; + }; + }; +@@ -86,7 +83,6 @@ + fragment@10 { + target = <&hvs>; + __overlay__ { +- interrupts = <2 1>; + status = "okay"; + }; + }; +@@ -94,7 +90,6 @@ + fragment@11 { + target = <&hdmi>; + __overlay__ { +- interrupts = <2 8>, <2 9>; + status = "okay"; + }; + }; +@@ -102,7 +97,6 @@ + fragment@12 { + target = <&v3d>; + __overlay__ { +- interrupts = <1 10>; + status = "okay"; + }; + }; +@@ -115,14 +109,6 @@ + }; + + fragment@14 { +- target-path = "/soc/dma"; +- __overlay__ { +- brcm,dma-channel-mask = <0x7f35>; +- }; +- }; +- +- +- fragment@15 { + target = <&clocks>; + __overlay__ { + claim-clocks = < +@@ -134,14 +120,14 @@ + }; + }; + +- fragment@16 { ++ fragment@15 { + target = <&vec>; + __overlay__ { + status = "okay"; + }; + }; + +- fragment@17 { ++ fragment@16 { + target = <&txp>; + __overlay__ { + status = "okay"; diff --git a/target/linux/brcm2708/patches-4.19/950-0457-BCM270X_DT-Add-non-removable-clone-of-mmc-node.patch b/target/linux/brcm2708/patches-4.19/950-0457-BCM270X_DT-Add-non-removable-clone-of-mmc-node.patch new file mode 100644 index 0000000000..8e854bdbc8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0457-BCM270X_DT-Add-non-removable-clone-of-mmc-node.patch @@ -0,0 +1,206 @@ +From c63b13bddf317347ba0b69807c1591526d50ba47 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 7 May 2019 14:29:38 +0100 +Subject: [PATCH] BCM270X_DT: Add non-removable clone of mmc node + +non-removable is a boolean property, and as such can't be unset by an +overlay if it is set in a base DTB. Until now the workaround for this +problem has been for overlays to clone non-removable nodes without +the offending property, but this involves a lot of unnecessary +replication. Instead, add a clone of the mmc node with non-removable +already set to the base DTB, selecting the required version using +the status properties. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 4 +-- + arch/arm/boot/dts/bcm2708-rpi.dtsi | 3 +- + arch/arm/boot/dts/bcm270x.dtsi | 13 ++++++++ + arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 5 ++-- + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 5 ++-- + arch/arm/boot/dts/overlays/mmc-overlay.dts | 7 +++++ + arch/arm/boot/dts/overlays/sdio-overlay.dts | 33 +++++++-------------- + 7 files changed, 38 insertions(+), 32 deletions(-) + +--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts +@@ -14,6 +14,7 @@ + aliases { + serial0 = &uart1; + serial1 = &uart0; ++ mmc1 = &mmcnr; + }; + }; + +@@ -73,10 +74,9 @@ + }; + }; + +-&mmc { ++&mmcnr { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; +- non-removable; + bus-width = <4>; + status = "okay"; + }; +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -118,7 +118,8 @@ + sd_force_pio = <&sdhost>,"brcm,force-pio?"; + sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; + sd_debug = <&sdhost>,"brcm,debug"; +- sdio_overclock = <&mmc>,"brcm,overclock-50:0"; ++ sdio_overclock = <&mmc>,"brcm,overclock-50:0", ++ <&mmcnr>,"brcm,overclock-50:0"; + axiperf = <&axiperf>,"status"; + }; + }; +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -79,6 +79,19 @@ + status = "disabled"; + }; + ++ /* A clone of mmc but with non-removable set */ ++ mmcnr: mmcnr@7e300000 { ++ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; ++ reg = <0x7e300000 0x100>; ++ interrupts = <2 30>; ++ clocks = <&clocks BCM2835_CLOCK_EMMC>; ++ dmas = <&dma 11>; ++ dma-names = "rx-tx"; ++ brcm,overclock-50 = <0>; ++ non-removable; ++ status = "disabled"; ++ }; ++ + hvs: hvs@7e400000 { + /* Add alias */ + status = "disabled"; +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts +@@ -15,6 +15,7 @@ + aliases { + serial0 = &uart1; + serial1 = &uart0; ++ mmc1 = &mmcnr; + }; + }; + +@@ -74,13 +75,11 @@ + }; + }; + +-&mmc { ++&mmcnr { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; +- non-removable; + bus-width = <4>; + status = "okay"; +- brcm,overclock-50 = <0>; + }; + + &firmware { +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -15,6 +15,7 @@ + aliases { + serial0 = &uart1; + serial1 = &uart0; ++ mmc1 = &mmcnr; + }; + }; + +@@ -74,13 +75,11 @@ + }; + }; + +-&mmc { ++&mmcnr { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; +- non-removable; + bus-width = <4>; + status = "okay"; +- brcm,overclock-50 = <0>; + }; + + &soc { +--- a/arch/arm/boot/dts/overlays/mmc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts +@@ -33,6 +33,13 @@ + }; + }; + ++ fragment@3 { ++ target = <&mmcnr>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ + __overrides__ { + overclock_50 = <&frag0>,"brcm,overclock-50:0"; + }; +--- a/arch/arm/boot/dts/overlays/sdio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts +@@ -1,39 +1,26 @@ + /dts-v1/; + /plugin/; + +-/* Enable SDIO from MMC interface via GPIOs 22-27. Includes sdhost overlay. */ ++/* Enable SDIO from MMC interface via various GPIO groups */ + + /{ + compatible = "brcm,bcm2835"; + + fragment@0 { +- target = <&mmc>; ++ target = <&mmcnr>; + __overlay__ { + status = "disabled"; + }; + }; + + fragment@1 { +- target = <&soc>; +- __overlay__ { +- #address-cells = <1>; +- #size-cells = <1>; +- +- sdio_ovl: sdio@7e300000 { +- compatible = "brcm,bcm2835-mmc", +- "brcm,bcm2835-sdhci"; +- reg = <0x7e300000 0x100>; +- interrupts = <2 30>; +- clocks = <&clocks 28/*BCM2835_CLOCK_EMMC*/>; +- dmas = <&dma 11>; +- dma-names = "rx-tx"; +- brcm,overclock-50 = <0>; +- status = "okay"; +- pinctrl-names = "default"; +- pinctrl-0 = <&sdio_ovl_pins>; +- non-removable; +- bus-width = <4>; +- }; ++ target = <&mmc>; ++ sdio_ovl: __overlay__ { ++ pinctrl-0 = <&sdio_ovl_pins>; ++ pinctrl-names = "default"; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; + }; + }; + +@@ -75,7 +62,7 @@ + fragment@6 { + target-path = "/aliases"; + __overlay__ { +- mmc1 = "/soc/sdio@7e300000"; ++ mmc1 = "/soc/mmc@7e300000"; + }; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0457-staging-bcm2835-audio-Move-module-parameter-descript.patch b/target/linux/brcm2708/patches-4.19/950-0457-staging-bcm2835-audio-Move-module-parameter-descript.patch deleted file mode 100644 index b29639be8a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0457-staging-bcm2835-audio-Move-module-parameter-descript.patch +++ /dev/null @@ -1,36 +0,0 @@ -From fb05aeb91f3e94e89ad2d9aa68104e6e4cc97239 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:53 +0200 -Subject: [PATCH 457/806] staging: bcm2835-audio: Move module parameter - description - -commit b876f2075808e95e244053caa53fa7e86e929a99 upstream. - -For more consistency, move the module parameter description right -after its variable definition. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -19,6 +19,8 @@ struct bcm2835_audio_instance { - }; - - static bool force_bulk; -+module_param(force_bulk, bool, 0444); -+MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio"); - - static void bcm2835_audio_lock(struct bcm2835_audio_instance *instance) - { -@@ -378,6 +380,3 @@ int bcm2835_audio_write(struct bcm2835_a - bcm2835_audio_unlock(instance); - return err; - } -- --module_param(force_bulk, bool, 0444); --MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0458-BCM270X_DT-usb-Refactor-DTS-and-overlays.patch b/target/linux/brcm2708/patches-4.19/950-0458-BCM270X_DT-usb-Refactor-DTS-and-overlays.patch new file mode 100644 index 0000000000..162c28ee84 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0458-BCM270X_DT-usb-Refactor-DTS-and-overlays.patch @@ -0,0 +1,60 @@ +From 61c44e24ea212b92bf6a420b94070ee6fc715811 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 8 May 2019 10:08:31 +0100 +Subject: [PATCH] BCM270X_DT: usb: Refactor DTS and overlays + +Move the IRQ interrupt declaration in the usb node before the FIQ +declaration, so that the dwc2 driver will find it. Name the +interrupts appropriately so that the dwc_otg driver can still find +them. Then remove the interrupt rewriting from the overlays. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm270x.dtsi | 6 ++++-- + arch/arm/boot/dts/overlays/dwc-otg-overlay.dts | 6 ------ + arch/arm/boot/dts/overlays/dwc2-overlay.dts | 2 -- + 3 files changed, 4 insertions(+), 10 deletions(-) + +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -131,8 +131,10 @@ + compatible = "brcm,bcm2708-usb"; + reg = <0x7e980000 0x10000>, + <0x7e006000 0x1000>; +- interrupts = <2 0>, +- <1 9>; ++ interrupt-names = "usb", ++ "soft"; ++ interrupts = <1 9>, ++ <2 0>; + }; + + v3d@7ec00000 { /* vd3 */ +--- a/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts +@@ -6,14 +6,8 @@ + + fragment@0 { + target = <&usb>; +- #address-cells = <1>; +- #size-cells = <1>; + __overlay__ { + compatible = "brcm,bcm2708-usb"; +- reg = <0x7e980000 0x10000>, +- <0x7e006000 0x1000>; +- interrupts = <2 0>, +- <1 9>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/dwc2-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts +@@ -10,8 +10,6 @@ + #size-cells = <1>; + dwc2_usb: __overlay__ { + compatible = "brcm,bcm2835-usb"; +- reg = <0x7e980000 0x10000>; +- interrupts = <1 9>; + dr_mode = "otg"; + g-np-tx-fifo-size = <32>; + g-rx-fifo-size = <256>; diff --git a/target/linux/brcm2708/patches-4.19/950-0458-staging-bcm2835-audio-Use-coherent-device-buffers.patch b/target/linux/brcm2708/patches-4.19/950-0458-staging-bcm2835-audio-Use-coherent-device-buffers.patch deleted file mode 100644 index e794a65354..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0458-staging-bcm2835-audio-Use-coherent-device-buffers.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 8a01a25d0ad7e9d06f64fddae871deb91c3988ac Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:54 +0200 -Subject: [PATCH 458/806] staging: bcm2835-audio: Use coherent device buffers - -commit ad29c6e6cbf6f2af7362b043adad51a3be3d39c7 upstream. - -The memory access to the pages allocated with -SNDRV_DMA_TYPE_CONTINUOUS are basically non-coherent, and it becomes a -problem when a process accesses via mmap. - -For the more consistent access, use the device coherent memory, just -by replacing the call pattern in the allocator helpers. - -The only point we need to be careful for is the device object passed -there; since bcm2835-audio driver creates fake devices and each card -is created on top of that, we need to pass its parent device as the -real device object. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -345,8 +345,8 @@ int snd_bcm2835_new_pcm(struct bcm2835_c - - /* pre-allocation of buffers */ - /* NOTE: this may fail */ -- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, -- snd_dma_continuous_data(GFP_KERNEL), -+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, -+ chip->card->dev->parent, - snd_bcm2835_playback_hw.buffer_bytes_max, - snd_bcm2835_playback_hw.buffer_bytes_max); - -@@ -371,8 +371,8 @@ int snd_bcm2835_new_spdif_pcm(struct bcm - - /* pre-allocation of buffers */ - /* NOTE: this may fail */ -- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, -- snd_dma_continuous_data(GFP_KERNEL), -+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, -+ chip->card->dev->parent, - snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max); - - return 0; -@@ -404,8 +404,8 @@ int snd_bcm2835_new_simple_pcm(struct bc - - snd_pcm_lib_preallocate_pages_for_all( - pcm, -- SNDRV_DMA_TYPE_CONTINUOUS, -- snd_dma_continuous_data(GFP_KERNEL), -+ SNDRV_DMA_TYPE_DEV, -+ chip->card->dev->parent, - snd_bcm2835_playback_hw.buffer_bytes_max, - snd_bcm2835_playback_hw.buffer_bytes_max); - diff --git a/target/linux/brcm2708/patches-4.19/950-0459-overlays-Update-upstream-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0459-overlays-Update-upstream-overlay.patch new file mode 100644 index 0000000000..45476681e1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0459-overlays-Update-upstream-overlay.patch @@ -0,0 +1,126 @@ +From 61c487e6a1985e52307d6df5834b610a50219819 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 22 May 2019 13:29:56 +0100 +Subject: [PATCH] overlays: Update upstream overlay + +The recent DT/overlay changes have had a corresponding effect on the +upstream overlay, which is a composite of the vc4-kms-v3d and dwc2 +overlays. + +Signed-off-by: Phil Elwell +--- + .../boot/dts/overlays/upstream-overlay.dts | 41 ++----------------- + 1 file changed, 3 insertions(+), 38 deletions(-) + +--- a/arch/arm/boot/dts/overlays/upstream-overlay.dts ++++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts +@@ -52,42 +52,36 @@ + fragment@7 { + target = <&pixelvalve0>; + __overlay__ { +- interrupts = <2 13>; + status = "okay"; + }; + }; + fragment@8 { + target = <&pixelvalve1>; + __overlay__ { +- interrupts = <2 14>; + status = "okay"; + }; + }; + fragment@9 { + target = <&pixelvalve2>; + __overlay__ { +- interrupts = <2 10>; + status = "okay"; + }; + }; + fragment@10 { + target = <&hvs>; + __overlay__ { +- interrupts = <2 1>; + status = "okay"; + }; + }; + fragment@11 { + target = <&hdmi>; + __overlay__ { +- interrupts = <2 8>, <2 9>; + status = "okay"; + }; + }; + fragment@12 { + target = <&v3d>; + __overlay__ { +- interrupts = <1 10>; + status = "okay"; + }; + }; +@@ -98,37 +92,29 @@ + }; + }; + fragment@14 { +- target-path = "/soc/dma"; +- __overlay__ { +- brcm,dma-channel-mask = <0x7f35>; +- }; +- }; +- fragment@15 { + target = <&clocks>; + __overlay__ { + claim-clocks = ; + }; + }; +- fragment@16 { ++ fragment@15 { + target = <&vec>; + __overlay__ { + status = "okay"; + }; + }; +- fragment@17 { ++ fragment@16 { + target = <&txp>; + __overlay__ { + status = "okay"; + }; + }; +- fragment@18 { ++ fragment@17 { + target = <&usb>; + #address-cells = <1>; + #size-cells = <1>; + dwc2_usb: __overlay__ { + compatible = "brcm,bcm2835-usb"; +- reg = <0x7e980000 0x10000>; +- interrupts = <1 9>; + dr_mode = "otg"; + g-np-tx-fifo-size = <32>; + g-rx-fifo-size = <256>; +@@ -136,25 +122,4 @@ + status = "okay"; + }; + }; +- fragment@19 { +- target = <&uart1>; +- __overlay__ { +- interrupt-parent = <&intc>; +- interrupts = <0x1 0x1d>; +- }; +- }; +- fragment@20 { +- target = <&spi1>; +- __overlay__ { +- interrupt-parent = <&intc>; +- interrupts = <0x1 0x1d>; +- }; +- }; +- fragment@21 { +- target = <&spi2>; +- __overlay__ { +- interrupt-parent = <&intc>; +- interrupts = <0x1 0x1d>; +- }; +- }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0459-staging-bcm2835-audio-Set-SNDRV_PCM_INFO_SYNC_APPLPT.patch b/target/linux/brcm2708/patches-4.19/950-0459-staging-bcm2835-audio-Set-SNDRV_PCM_INFO_SYNC_APPLPT.patch deleted file mode 100644 index 29567f59e3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0459-staging-bcm2835-audio-Set-SNDRV_PCM_INFO_SYNC_APPLPT.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 27417ac1fa4894dc46d71cc34af17fe6a5186f2f Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:55 +0200 -Subject: [PATCH 459/806] staging: bcm2835-audio: Set - SNDRV_PCM_INFO_SYNC_APPLPTR - -commit b59d6a5f73501f74848d6700101e7736afe3d54a upstream. - -The recent ALSA PCM core supports the SNDRV_PCM_INFO_SYNC_APPLPTR flag -indicating that the driver needs the ack call at each appl_ptr -update. This is requirement for the indirect PCM implementations like -bcm2835-audio driver, too. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -12,7 +12,7 @@ - static const struct snd_pcm_hardware snd_bcm2835_playback_hw = { - .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | -- SNDRV_PCM_INFO_DRAIN_TRIGGER), -+ SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR), - .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, - .rate_min = 8000, -@@ -29,7 +29,7 @@ static const struct snd_pcm_hardware snd - static const struct snd_pcm_hardware snd_bcm2835_playback_spdif_hw = { - .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | -- SNDRV_PCM_INFO_DRAIN_TRIGGER), -+ SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR), - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 | - SNDRV_PCM_RATE_48000, diff --git a/target/linux/brcm2708/patches-4.19/950-0460-staging-bcm2835-audio-Simplify-PCM-creation-helpers.patch b/target/linux/brcm2708/patches-4.19/950-0460-staging-bcm2835-audio-Simplify-PCM-creation-helpers.patch deleted file mode 100644 index 8da7d94162..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0460-staging-bcm2835-audio-Simplify-PCM-creation-helpers.patch +++ /dev/null @@ -1,196 +0,0 @@ -From 706f9b2b95a2fff44f92deada99545036c249658 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:56 +0200 -Subject: [PATCH 460/806] staging: bcm2835-audio: Simplify PCM creation helpers - -commit 74470ffeb9aed5548654cfca881bf1d7469fe9c4 upstream. - -All three functions to create PCM objects are fairly resemble, and can -be unified to a single common helper. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 87 ++++--------------- - .../vc04_services/bcm2835-audio/bcm2835.c | 17 +++- - .../vc04_services/bcm2835-audio/bcm2835.h | 9 +- - 3 files changed, 32 insertions(+), 81 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -324,91 +324,36 @@ static const struct snd_pcm_ops snd_bcm2 - }; - - /* create a pcm device */ --int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, u32 numchannels) -+int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name, -+ int idx, enum snd_bcm2835_route route, -+ u32 numchannels, bool spdif) - { - struct snd_pcm *pcm; - int err; - -- err = snd_pcm_new(chip->card, "bcm2835 ALSA", 0, numchannels, 0, &pcm); -- if (err < 0) -- return err; -- pcm->private_data = chip; -- pcm->nonatomic = true; -- strcpy(pcm->name, "bcm2835 ALSA"); -- chip->pcm = pcm; -- chip->dest = AUDIO_DEST_AUTO; -- chip->volume = 0; -- chip->mute = CTRL_VOL_UNMUTE; /*disable mute on startup */ -- /* set operators */ -- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, -- &snd_bcm2835_playback_ops); -- -- /* pre-allocation of buffers */ -- /* NOTE: this may fail */ -- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, -- chip->card->dev->parent, -- snd_bcm2835_playback_hw.buffer_bytes_max, -- snd_bcm2835_playback_hw.buffer_bytes_max); -- -- return 0; --} -- --int snd_bcm2835_new_spdif_pcm(struct bcm2835_chip *chip) --{ -- struct snd_pcm *pcm; -- int err; -- -- err = snd_pcm_new(chip->card, "bcm2835 ALSA", 1, 1, 0, &pcm); -- if (err < 0) -- return err; -- -- pcm->private_data = chip; -- pcm->nonatomic = true; -- strcpy(pcm->name, "bcm2835 IEC958/HDMI"); -- chip->pcm_spdif = pcm; -- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, -- &snd_bcm2835_playback_spdif_ops); -- -- /* pre-allocation of buffers */ -- /* NOTE: this may fail */ -- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, -- chip->card->dev->parent, -- snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max); -- -- return 0; --} -- --int snd_bcm2835_new_simple_pcm(struct bcm2835_chip *chip, -- const char *name, -- enum snd_bcm2835_route route, -- u32 numchannels) --{ -- struct snd_pcm *pcm; -- int err; -- -- err = snd_pcm_new(chip->card, name, 0, numchannels, -- 0, &pcm); -+ err = snd_pcm_new(chip->card, name, idx, numchannels, 0, &pcm); - if (err) - return err; - - pcm->private_data = chip; - pcm->nonatomic = true; - strcpy(pcm->name, name); -- chip->pcm = pcm; -- chip->dest = route; -- chip->volume = 0; -- chip->mute = CTRL_VOL_UNMUTE; -+ if (!spdif) { -+ chip->dest = route; -+ chip->volume = 0; -+ chip->mute = CTRL_VOL_UNMUTE; -+ } - - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, -+ spdif ? &snd_bcm2835_playback_spdif_ops : - &snd_bcm2835_playback_ops); - -- snd_pcm_lib_preallocate_pages_for_all( -- pcm, -- SNDRV_DMA_TYPE_DEV, -- chip->card->dev->parent, -- snd_bcm2835_playback_hw.buffer_bytes_max, -- snd_bcm2835_playback_hw.buffer_bytes_max); -+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, -+ chip->card->dev->parent, 128 * 1024, 128 * 1024); - -+ if (spdif) -+ chip->pcm_spdif = pcm; -+ else -+ chip->pcm = pcm; - return 0; - } -- ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -138,17 +138,26 @@ static int bcm2835_audio_alsa_newpcm(str - { - int err; - -- err = snd_bcm2835_new_pcm(chip, numchannels - 1); -+ err = snd_bcm2835_new_pcm(chip, "bcm2835 ALSA", 0, AUDIO_DEST_AUTO, -+ numchannels - 1, false); - if (err) - return err; - -- err = snd_bcm2835_new_spdif_pcm(chip); -+ err = snd_bcm2835_new_pcm(chip, "bcm2835 IEC958/HDMI", 1, 0, 1, true); - if (err) - return err; - - return 0; - } - -+static int bcm2835_audio_simple_newpcm(struct bcm2835_chip *chip, -+ const char *name, -+ enum snd_bcm2835_route route, -+ u32 numchannels) -+{ -+ return snd_bcm2835_new_pcm(chip, name, 0, route, numchannels, false); -+} -+ - static struct bcm2835_audio_driver bcm2835_audio_alsa = { - .driver = { - .name = "bcm2835_alsa", -@@ -169,7 +178,7 @@ static struct bcm2835_audio_driver bcm28 - .shortname = "bcm2835 HDMI", - .longname = "bcm2835 HDMI", - .minchannels = 1, -- .newpcm = snd_bcm2835_new_simple_pcm, -+ .newpcm = bcm2835_audio_simple_newpcm, - .newctl = snd_bcm2835_new_hdmi_ctl, - .route = AUDIO_DEST_HDMI - }; -@@ -182,7 +191,7 @@ static struct bcm2835_audio_driver bcm28 - .shortname = "bcm2835 Headphones", - .longname = "bcm2835 Headphones", - .minchannels = 1, -- .newpcm = snd_bcm2835_new_simple_pcm, -+ .newpcm = bcm2835_audio_simple_newpcm, - .newctl = snd_bcm2835_new_headphones_ctl, - .route = AUDIO_DEST_HEADPHONES - }; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -84,12 +84,9 @@ struct bcm2835_alsa_stream { - }; - - int snd_bcm2835_new_ctl(struct bcm2835_chip *chip); --int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, u32 numchannels); --int snd_bcm2835_new_spdif_pcm(struct bcm2835_chip *chip); --int snd_bcm2835_new_simple_pcm(struct bcm2835_chip *chip, -- const char *name, -- enum snd_bcm2835_route route, -- u32 numchannels); -+int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name, -+ int idx, enum snd_bcm2835_route route, -+ u32 numchannels, bool spdif); - - int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip); - int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip); diff --git a/target/linux/brcm2708/patches-4.19/950-0460-w1-ds2408-Fix-typo-after-49695ac46861-reset-on-outpu.patch b/target/linux/brcm2708/patches-4.19/950-0460-w1-ds2408-Fix-typo-after-49695ac46861-reset-on-outpu.patch new file mode 100644 index 0000000000..c3d32ee648 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0460-w1-ds2408-Fix-typo-after-49695ac46861-reset-on-outpu.patch @@ -0,0 +1,31 @@ +From f74fe07cab3e8816c029de25029b71c80004619c Mon Sep 17 00:00:00 2001 +From: Mariusz Bialonczyk +Date: Thu, 16 May 2019 14:39:21 +0200 +Subject: [PATCH] w1: ds2408: Fix typo after 49695ac46861 (reset on + output_write retry with readback) + +commit 6660a04feb7ef648e50c792e19084d675fa6f3a2 upstream. + +Fix a typo in commit: +49695ac46861 w1: ds2408: reset on output_write retry with readback + +Fixes: 49695ac46861 ("w1: ds2408: reset on output_write retry with readback") +Reported-by: Phil Elwell +Cc: Jean-Francois Dagenais +Signed-off-by: Mariusz Bialonczyk +Signed-off-by: Greg Kroah-Hartman +--- + drivers/w1/slaves/w1_ds2408.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/w1/slaves/w1_ds2408.c ++++ b/drivers/w1/slaves/w1_ds2408.c +@@ -138,7 +138,7 @@ static ssize_t status_control_read(struc + W1_F29_REG_CONTROL_AND_STATUS, buf); + } + +-#ifdef fCONFIG_W1_SLAVE_DS2408_READBACK ++#ifdef CONFIG_W1_SLAVE_DS2408_READBACK + static bool optional_read_back_valid(struct w1_slave *sl, u8 expected) + { + u8 w1_buf[3]; diff --git a/target/linux/brcm2708/patches-4.19/950-0461-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch b/target/linux/brcm2708/patches-4.19/950-0461-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch new file mode 100644 index 0000000000..37bb4fd61e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0461-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch @@ -0,0 +1,367 @@ +From 9542646d9211ab4305beb75da97f61cc1968ae6c Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 28 May 2019 16:36:04 +0100 +Subject: [PATCH] BCM270X_DT: Rename Pi Zero W DT files + +The downtream Pi Zero W dts file uses the digit 0, whereas upstream +chose to spell it out - "zero-w". The firmware has, for a long time, +looked for bcm2708-rpi-zero-w.dtb first before falling back to the +numerical version. Therefore it is better to follow upstream and +make the switch to "bcm2708-rpi-zero-w". + +At the same time, remove some overrides that duplicate values +inherited from the shared .dtsi files. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 2 +- + .../boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} | 5 ----- + 2 files changed, 1 insertion(+), 6 deletions(-) + rename arch/arm/boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} (97%) + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -4,7 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2708-rpi-b.dtb \ + bcm2708-rpi-b-plus.dtb \ + bcm2708-rpi-cm.dtb \ +- bcm2708-rpi-0-w.dtb \ ++ bcm2708-rpi-zero-w.dtb \ + bcm2709-rpi-2-b.dtb \ + bcm2710-rpi-3-b.dtb \ + bcm2710-rpi-3-b-plus.dtb \ +--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts ++++ /dev/null +@@ -1,167 +0,0 @@ +-/dts-v1/; +- +-#include "bcm2708.dtsi" +-#include "bcm283x-rpi-csi1-2lane.dtsi" +- +-/ { +- compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; +- model = "Raspberry Pi Zero W"; +- +- chosen { +- bootargs = "coherent_pool=1M 8250.nr_uarts=1"; +- }; +- +- aliases { +- serial0 = &uart1; +- serial1 = &uart0; +- mmc1 = &mmcnr; +- }; +-}; +- +-&gpio { +- spi0_pins: spi0_pins { +- brcm,pins = <9 10 11>; +- brcm,function = <4>; /* alt0 */ +- }; +- +- spi0_cs_pins: spi0_cs_pins { +- brcm,pins = <8 7>; +- brcm,function = <1>; /* output */ +- }; +- +- i2c0_pins: i2c0 { +- brcm,pins = <0 1>; +- brcm,function = <4>; +- }; +- +- i2c1_pins: i2c1 { +- brcm,pins = <2 3>; +- brcm,function = <4>; +- }; +- +- i2s_pins: i2s { +- brcm,pins = <18 19 20 21>; +- brcm,function = <4>; /* alt0 */ +- }; +- +- sdio_pins: sdio_pins { +- brcm,pins = <34 35 36 37 38 39>; +- brcm,function = <7>; /* ALT3 = SD1 */ +- brcm,pull = <0 2 2 2 2 2>; +- }; +- +- bt_pins: bt_pins { +- brcm,pins = <43>; +- brcm,function = <4>; /* alt0:GPCLK2 */ +- brcm,pull = <0>; /* none */ +- }; +- +- uart0_pins: uart0_pins { +- brcm,pins = <30 31 32 33>; +- brcm,function = <7>; /* alt3=UART0 */ +- brcm,pull = <2 0 0 2>; /* up none none up */ +- }; +- +- uart1_pins: uart1_pins { +- brcm,pins; +- brcm,function; +- brcm,pull; +- }; +- +- audio_pins: audio_pins { +- brcm,pins = <>; +- brcm,function = <>; +- }; +-}; +- +-&mmcnr { +- pinctrl-names = "default"; +- pinctrl-0 = <&sdio_pins>; +- bus-width = <4>; +- status = "okay"; +-}; +- +-&uart0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins &bt_pins>; +- status = "okay"; +-}; +- +-&uart1 { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart1_pins>; +- status = "okay"; +-}; +- +-&spi0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&spi0_pins &spi0_cs_pins>; +- cs-gpios = <&gpio 8 1>, <&gpio 7 1>; +- +- spidev0: spidev@0{ +- compatible = "spidev"; +- reg = <0>; /* CE0 */ +- #address-cells = <1>; +- #size-cells = <0>; +- spi-max-frequency = <125000000>; +- }; +- +- spidev1: spidev@1{ +- compatible = "spidev"; +- reg = <1>; /* CE1 */ +- #address-cells = <1>; +- #size-cells = <0>; +- spi-max-frequency = <125000000>; +- }; +-}; +- +-&i2c0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&i2c0_pins>; +- clock-frequency = <100000>; +-}; +- +-&i2c1 { +- pinctrl-names = "default"; +- pinctrl-0 = <&i2c1_pins>; +- clock-frequency = <100000>; +-}; +- +-&i2c2 { +- clock-frequency = <100000>; +-}; +- +-&i2s { +- #sound-dai-cells = <0>; +- pinctrl-names = "default"; +- pinctrl-0 = <&i2s_pins>; +-}; +- +-&random { +- status = "okay"; +-}; +- +-&leds { +- act_led: act { +- label = "led0"; +- linux,default-trigger = "mmc0"; +- gpios = <&gpio 47 0>; +- }; +-}; +- +-&hdmi { +- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +-}; +- +-&audio { +- pinctrl-names = "default"; +- pinctrl-0 = <&audio_pins>; +-}; +- +-/ { +- __overrides__ { +- act_led_gpio = <&act_led>,"gpios:4"; +- act_led_activelow = <&act_led>,"gpios:8"; +- act_led_trigger = <&act_led>,"linux,default-trigger"; +- }; +-}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts +@@ -0,0 +1,162 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; ++ model = "Raspberry Pi Zero W"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; /* none */ ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <30 31 32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <2 0 0 2>; /* up none none up */ ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0461-staging-bcm2835-audio-Simplify-kctl-creation-helpers.patch b/target/linux/brcm2708/patches-4.19/950-0461-staging-bcm2835-audio-Simplify-kctl-creation-helpers.patch deleted file mode 100644 index aeb0c3f0d6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0461-staging-bcm2835-audio-Simplify-kctl-creation-helpers.patch +++ /dev/null @@ -1,161 +0,0 @@ -From c4766c1589a25608ffe6848722632be2f65d0951 Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:57 +0200 -Subject: [PATCH 461/806] staging: bcm2835-audio: Simplify kctl creation - helpers - -commit dc5c0eb1e8601206dffbfc302cbd190f89dcd040 upstream. - -Just a minor code refactoring and adding some const prefix. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-ctl.c | 69 +++++++------------ - 1 file changed, 25 insertions(+), 44 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-ctl.c -@@ -97,40 +97,34 @@ static int snd_bcm2835_ctl_put(struct sn - - static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, CTRL_VOL_MIN, 1, 1); - --static struct snd_kcontrol_new snd_bcm2835_ctl[] = { -+static const struct snd_kcontrol_new snd_bcm2835_ctl[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "PCM Playback Volume", -- .index = 0, - .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, - .private_value = PCM_PLAYBACK_VOLUME, - .info = snd_bcm2835_ctl_info, - .get = snd_bcm2835_ctl_get, - .put = snd_bcm2835_ctl_put, -- .count = 1, - .tlv = {.p = snd_bcm2835_db_scale} - }, - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "PCM Playback Switch", -- .index = 0, - .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, - .private_value = PCM_PLAYBACK_MUTE, - .info = snd_bcm2835_ctl_info, - .get = snd_bcm2835_ctl_get, - .put = snd_bcm2835_ctl_put, -- .count = 1, - }, - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "PCM Playback Route", -- .index = 0, - .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, - .private_value = PCM_PLAYBACK_DEVICE, - .info = snd_bcm2835_ctl_info, - .get = snd_bcm2835_ctl_get, - .put = snd_bcm2835_ctl_put, -- .count = 1, - }, - }; - -@@ -196,7 +190,7 @@ static int snd_bcm2835_spdif_mask_get(st - return 0; - } - --static struct snd_kcontrol_new snd_bcm2835_spdif[] = { -+static const struct snd_kcontrol_new snd_bcm2835_spdif[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, - .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), -@@ -213,28 +207,32 @@ static struct snd_kcontrol_new snd_bcm28 - }, - }; - --int snd_bcm2835_new_ctl(struct bcm2835_chip *chip) -+static int create_ctls(struct bcm2835_chip *chip, size_t size, -+ const struct snd_kcontrol_new *kctls) - { -- int err; -- unsigned int idx; -+ int i, err; - -- strcpy(chip->card->mixername, "Broadcom Mixer"); -- for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) { -- err = snd_ctl_add(chip->card, -- snd_ctl_new1(&snd_bcm2835_ctl[idx], chip)); -- if (err < 0) -- return err; -- } -- for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_spdif); idx++) { -- err = snd_ctl_add(chip->card, -- snd_ctl_new1(&snd_bcm2835_spdif[idx], chip)); -+ for (i = 0; i < size; i++) { -+ err = snd_ctl_add(chip->card, snd_ctl_new1(&kctls[i], chip)); - if (err < 0) - return err; - } - return 0; - } - --static struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = { -+int snd_bcm2835_new_ctl(struct bcm2835_chip *chip) -+{ -+ int err; -+ -+ strcpy(chip->card->mixername, "Broadcom Mixer"); -+ err = create_ctls(chip, ARRAY_SIZE(snd_bcm2835_ctl), snd_bcm2835_ctl); -+ if (err < 0) -+ return err; -+ return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_spdif), -+ snd_bcm2835_spdif); -+} -+ -+static const struct snd_kcontrol_new snd_bcm2835_headphones_ctl[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Headphone Playback Volume", -@@ -263,21 +261,12 @@ static struct snd_kcontrol_new snd_bcm28 - - int snd_bcm2835_new_headphones_ctl(struct bcm2835_chip *chip) - { -- int err; -- unsigned int idx; -- - strcpy(chip->card->mixername, "Broadcom Mixer"); -- for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_headphones_ctl); idx++) { -- err = snd_ctl_add(chip->card, -- snd_ctl_new1(&snd_bcm2835_headphones_ctl[idx], -- chip)); -- if (err) -- return err; -- } -- return 0; -+ return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_headphones_ctl), -+ snd_bcm2835_headphones_ctl); - } - --static struct snd_kcontrol_new snd_bcm2835_hdmi[] = { -+static const struct snd_kcontrol_new snd_bcm2835_hdmi[] = { - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "HDMI Playback Volume", -@@ -306,16 +295,8 @@ static struct snd_kcontrol_new snd_bcm28 - - int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip) - { -- int err; -- unsigned int idx; -- - strcpy(chip->card->mixername, "Broadcom Mixer"); -- for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_hdmi); idx++) { -- err = snd_ctl_add(chip->card, -- snd_ctl_new1(&snd_bcm2835_hdmi[idx], chip)); -- if (err) -- return err; -- } -- return 0; -+ return create_ctls(chip, ARRAY_SIZE(snd_bcm2835_hdmi), -+ snd_bcm2835_hdmi); - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0462-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch b/target/linux/brcm2708/patches-4.19/950-0462-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch new file mode 100644 index 0000000000..fa60926439 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0462-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch @@ -0,0 +1,148 @@ +From e819b50b0c384f11f4eaf6e1ea76030c320f4511 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 28 May 2019 16:23:51 +0100 +Subject: [PATCH] BCM270X_DT: Create bcm2708-rpi-zero.dts + +The Pi Zero deserves a dedicated .dtb file - sharing the b-plus .dtb +has been observed to cause an issue with the MAC address of some +Ethernet dongles. + +See: https://github.com/raspberrypi/linux/issues/2990 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm2708-rpi-zero.dts | 117 +++++++++++++++++++++++++ + 2 files changed, 118 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-zero.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2708-rpi-b.dtb \ + bcm2708-rpi-b-plus.dtb \ + bcm2708-rpi-cm.dtb \ ++ bcm2708-rpi-zero.dtb \ + bcm2708-rpi-zero-w.dtb \ + bcm2709-rpi-2-b.dtb \ + bcm2710-rpi-3-b.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts +@@ -0,0 +1,117 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-zero", "brcm,bcm2835"; ++ model = "Raspberry Pi Zero"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M"; ++ }; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0462-staging-bcm2835-audio-Simplify-card-object-managemen.patch b/target/linux/brcm2708/patches-4.19/950-0462-staging-bcm2835-audio-Simplify-card-object-managemen.patch deleted file mode 100644 index 9fe519586f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0462-staging-bcm2835-audio-Simplify-card-object-managemen.patch +++ /dev/null @@ -1,212 +0,0 @@ -From b19ed31a1ced7b6d4c4c04967a509d91a134e5bb Mon Sep 17 00:00:00 2001 -From: Takashi Iwai -Date: Tue, 4 Sep 2018 17:58:58 +0200 -Subject: [PATCH 462/806] staging: bcm2835-audio: Simplify card object - management - -commit 872ae2d63d516a2a3b9c833d8685afcfa7814542 upstream. - -Instead of creating a dummy child device to manage the card object, -just use devm stuff directly for releasing with snd_card_free(). -This results in a lot of code reduction. - -Since the dummy child devices are gone, the device object to be passed -to the memory allocator needs to be adjusted as well. - -Signed-off-by: Takashi Iwai -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 2 +- - .../vc04_services/bcm2835-audio/bcm2835.c | 120 +++++------------- - 2 files changed, 33 insertions(+), 89 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -349,7 +349,7 @@ int snd_bcm2835_new_pcm(struct bcm2835_c - &snd_bcm2835_playback_ops); - - snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, -- chip->card->dev->parent, 128 * 1024, 128 * 1024); -+ chip->card->dev, 128 * 1024, 128 * 1024); - - if (spdif) - chip->pcm_spdif = pcm; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -22,38 +22,6 @@ module_param(enable_compat_alsa, bool, 0 - MODULE_PARM_DESC(enable_compat_alsa, - "Enables ALSA compatibility virtual audio device"); - --static void snd_devm_unregister_child(struct device *dev, void *res) --{ -- struct device *childdev = *(struct device **)res; -- struct bcm2835_chip *chip = dev_get_drvdata(childdev); -- struct snd_card *card = chip->card; -- -- snd_card_free(card); -- -- device_unregister(childdev); --} -- --static int snd_devm_add_child(struct device *dev, struct device *child) --{ -- struct device **dr; -- int ret; -- -- dr = devres_alloc(snd_devm_unregister_child, sizeof(*dr), GFP_KERNEL); -- if (!dr) -- return -ENOMEM; -- -- ret = device_add(child); -- if (ret) { -- devres_free(dr); -- return ret; -- } -- -- *dr = child; -- devres_add(dev, dr); -- -- return 0; --} -- - static void bcm2835_devm_free_vchi_ctx(struct device *dev, void *res) - { - struct bcm2835_vchi_ctx *vchi_ctx = res; -@@ -84,36 +52,6 @@ static int bcm2835_devm_add_vchi_ctx(str - return 0; - } - --static void snd_bcm2835_release(struct device *dev) --{ --} -- --static struct device * --snd_create_device(struct device *parent, -- struct device_driver *driver, -- const char *name) --{ -- struct device *device; -- int ret; -- -- device = devm_kzalloc(parent, sizeof(*device), GFP_KERNEL); -- if (!device) -- return ERR_PTR(-ENOMEM); -- -- device_initialize(device); -- device->parent = parent; -- device->driver = driver; -- device->release = snd_bcm2835_release; -- -- dev_set_name(device, "%s", name); -- -- ret = snd_devm_add_child(parent, device); -- if (ret) -- return ERR_PTR(ret); -- -- return device; --} -- - typedef int (*bcm2835_audio_newpcm_func)(struct bcm2835_chip *chip, - const char *name, - enum snd_bcm2835_route route, -@@ -216,40 +154,36 @@ static struct bcm2835_audio_drivers chil - }, - }; - --static int snd_add_child_device(struct device *device, -+static void bcm2835_card_free(void *data) -+{ -+ snd_card_free(data); -+} -+ -+static int snd_add_child_device(struct device *dev, - struct bcm2835_audio_driver *audio_driver, - u32 numchans) - { - struct snd_card *card; -- struct device *child; - struct bcm2835_chip *chip; - int err; - -- child = snd_create_device(device, &audio_driver->driver, -- audio_driver->driver.name); -- if (IS_ERR(child)) { -- dev_err(device, -- "Unable to create child device %p, error %ld", -- audio_driver->driver.name, -- PTR_ERR(child)); -- return PTR_ERR(child); -- } -- -- err = snd_card_new(child, -1, NULL, THIS_MODULE, sizeof(*chip), &card); -+ err = snd_card_new(dev, -1, NULL, THIS_MODULE, sizeof(*chip), &card); - if (err < 0) { -- dev_err(child, "Failed to create card"); -+ dev_err(dev, "Failed to create card"); - return err; - } - - chip = card->private_data; - chip->card = card; -- chip->dev = child; -+ chip->dev = dev; - mutex_init(&chip->audio_mutex); - -- chip->vchi_ctx = devres_find(device, -+ chip->vchi_ctx = devres_find(dev, - bcm2835_devm_free_vchi_ctx, NULL, NULL); -- if (!chip->vchi_ctx) -- return -ENODEV; -+ if (!chip->vchi_ctx) { -+ err = -ENODEV; -+ goto error; -+ } - - strcpy(card->driver, audio_driver->driver.name); - strcpy(card->shortname, audio_driver->shortname); -@@ -259,26 +193,36 @@ static int snd_add_child_device(struct d - audio_driver->route, - numchans); - if (err) { -- dev_err(child, "Failed to create pcm, error %d\n", err); -- return err; -+ dev_err(dev, "Failed to create pcm, error %d\n", err); -+ goto error; - } - - err = audio_driver->newctl(chip); - if (err) { -- dev_err(child, "Failed to create controls, error %d\n", err); -- return err; -+ dev_err(dev, "Failed to create controls, error %d\n", err); -+ goto error; - } - - err = snd_card_register(card); - if (err) { -- dev_err(child, "Failed to register card, error %d\n", err); -- return err; -+ dev_err(dev, "Failed to register card, error %d\n", err); -+ goto error; - } - -- dev_set_drvdata(child, chip); -- dev_info(child, "card created with %d channels\n", numchans); -+ dev_set_drvdata(dev, chip); - -+ err = devm_add_action(dev, bcm2835_card_free, card); -+ if (err < 0) { -+ dev_err(dev, "Failed to add devm action, err %d\n", err); -+ goto error; -+ } -+ -+ dev_info(dev, "card created with %d channels\n", numchans); - return 0; -+ -+ error: -+ snd_card_free(card); -+ return err; - } - - static int snd_add_child_devices(struct device *device, u32 numchans) diff --git a/target/linux/brcm2708/patches-4.19/950-0463-overlays-Fix-mmc-related-overlays-after-refactor.patch b/target/linux/brcm2708/patches-4.19/950-0463-overlays-Fix-mmc-related-overlays-after-refactor.patch new file mode 100644 index 0000000000..468aa30608 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0463-overlays-Fix-mmc-related-overlays-after-refactor.patch @@ -0,0 +1,73 @@ +From dadcb33e1f4ee70bc77da7fa7054b8571a22d5ea Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 30 May 2019 12:25:29 +0100 +Subject: [PATCH] overlays: Fix mmc-related overlays after refactor + +The addition of the mmcnr node to the base dtbs caused some overlays to +not work as they should. Patch up pi3-disable-wifi, balena-fin and +sdhost. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/balena-fin-overlay.dts | 7 ++++--- + arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts | 7 +++++++ + arch/arm/boot/dts/overlays/sdhost-overlay.dts | 7 +++++++ + 3 files changed, 18 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts ++++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts +@@ -5,13 +5,12 @@ + compatible = "brcm,bcm2835"; + + fragment@0 { +- target = <&mmc>; +- sdio_wifi: __overlay__ { ++ target = <&mmcnr>; ++ __overlay__ { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + bus-width = <4>; + brcm,overclock-50 = <35>; +- non-removable; + status = "okay"; + }; + }; +@@ -43,6 +42,8 @@ + compatible = "gpio-poweroff"; + gpios = <&gpio 40 1>; + force; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&power_ctrl_pins>; + }; + + i2c_soft: i2c@0 { +--- a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts +@@ -10,4 +10,11 @@ + status = "disabled"; + }; + }; ++ ++ fragment@1 { ++ target = <&mmcnr>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; + }; +--- a/arch/arm/boot/dts/overlays/sdhost-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts +@@ -22,6 +22,13 @@ + }; + }; + ++ fragment@2 { ++ target = <&mmcnr>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ + __overrides__ { + overclock_50 = <&frag0>,"brcm,overclock-50:0"; + force_pio = <&frag0>,"brcm,force-pio?"; diff --git a/target/linux/brcm2708/patches-4.19/950-0463-staging-bcm2835-audio-unify-FOURCC-command-definitio.patch b/target/linux/brcm2708/patches-4.19/950-0463-staging-bcm2835-audio-unify-FOURCC-command-definitio.patch deleted file mode 100644 index 367a3214fa..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0463-staging-bcm2835-audio-unify-FOURCC-command-definitio.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 26693d4d1239b8239644ce6da50b8ce06ff18ae5 Mon Sep 17 00:00:00 2001 -From: Nicolas Saenz Julienne -Date: Wed, 17 Oct 2018 21:01:50 +0200 -Subject: [PATCH 463/806] staging: bcm2835-audio: unify FOURCC command - definitions - -commit a90d8f49cc7fd7220aa24b85fc74ef3cfd62b96f upstream. - -The device communicates with the audio core using FOURCC codes. The -driver was generating them using different macros/expressions. We now -use the same macro to create them and centralize all the definitions. - -Signed-off-by: Nicolas Saenz Julienne -Reviewed-by: Takashi Iwai -Acked-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-vchiq.c | 13 ++++--------- - .../bcm2835-audio/vc_vchi_audioserv_defs.h | 4 +++- - 2 files changed, 7 insertions(+), 10 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -89,11 +89,6 @@ static int bcm2835_audio_send_simple(str - return bcm2835_audio_send_msg(instance, &m, wait); - } - --static const u32 BCM2835_AUDIO_WRITE_COOKIE1 = ('B' << 24 | 'C' << 16 | -- 'M' << 8 | 'A'); --static const u32 BCM2835_AUDIO_WRITE_COOKIE2 = ('D' << 24 | 'A' << 16 | -- 'T' << 8 | 'A'); -- - static void audio_vchi_callback(void *param, - const VCHI_CALLBACK_REASON_T reason, - void *msg_handle) -@@ -112,8 +107,8 @@ static void audio_vchi_callback(void *pa - instance->result = m.u.result.success; - complete(&instance->msg_avail_comp); - } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { -- if (m.u.complete.cookie1 != BCM2835_AUDIO_WRITE_COOKIE1 || -- m.u.complete.cookie2 != BCM2835_AUDIO_WRITE_COOKIE2) -+ if (m.u.complete.cookie1 != VC_AUDIO_WRITE_COOKIE1 || -+ m.u.complete.cookie2 != VC_AUDIO_WRITE_COOKIE2) - dev_err(instance->dev, "invalid cookie\n"); - else - bcm2835_playback_fifo(instance->alsa_stream, -@@ -337,8 +332,8 @@ int bcm2835_audio_write(struct bcm2835_a - .type = VC_AUDIO_MSG_TYPE_WRITE, - .u.write.count = size, - .u.write.max_packet = instance->max_packet, -- .u.write.cookie1 = BCM2835_AUDIO_WRITE_COOKIE1, -- .u.write.cookie2 = BCM2835_AUDIO_WRITE_COOKIE2, -+ .u.write.cookie1 = VC_AUDIO_WRITE_COOKIE1, -+ .u.write.cookie2 = VC_AUDIO_WRITE_COOKIE2, - }; - unsigned int count; - int err, status; ---- a/drivers/staging/vc04_services/bcm2835-audio/vc_vchi_audioserv_defs.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/vc_vchi_audioserv_defs.h -@@ -7,8 +7,10 @@ - #define VC_AUDIOSERV_MIN_VER 1 - #define VC_AUDIOSERV_VER 2 - --/* FourCC code used for VCHI connection */ -+/* FourCC codes used for VCHI communication */ - #define VC_AUDIO_SERVER_NAME MAKE_FOURCC("AUDS") -+#define VC_AUDIO_WRITE_COOKIE1 MAKE_FOURCC("BCMA") -+#define VC_AUDIO_WRITE_COOKIE2 MAKE_FOURCC("DATA") - - /* - * List of screens that are currently supported diff --git a/target/linux/brcm2708/patches-4.19/950-0464-Fixed-48k-timing-issue.patch b/target/linux/brcm2708/patches-4.19/950-0464-Fixed-48k-timing-issue.patch new file mode 100644 index 0000000000..541e18ac06 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0464-Fixed-48k-timing-issue.patch @@ -0,0 +1,95 @@ +From 539e2eef7dbfb58ab028a5530430611973dd4c84 Mon Sep 17 00:00:00 2001 +From: IQaudIO +Date: Thu, 6 Jun 2019 10:20:55 +0100 +Subject: [PATCH] Fixed 48k timing issue + +--- + sound/soc/bcm/iqaudio-codec.c | 33 ++++++++++++++++++++++++++++----- + 1 file changed, 28 insertions(+), 5 deletions(-) + +--- a/sound/soc/bcm/iqaudio-codec.c ++++ b/sound/soc/bcm/iqaudio-codec.c +@@ -45,11 +45,15 @@ static int snd_rpi_iqaudio_pll_control(s + 0); + if (ret) + dev_err(card->dev, "Failed to bypass PLL: %d\n", ret); ++ /* Allow PLL time to bypass */ ++ msleep(100); + } else if (SND_SOC_DAPM_EVENT_ON(event)) { + ret = snd_soc_dai_set_pll(codec_dai, 0, DA7213_SYSCLK_PLL, 0, + pll_out); + if (ret) + dev_err(card->dev, "Failed to enable PLL: %d\n", ret); ++ /* Allow PLL time to lock */ ++ msleep(100); + } + + return ret; +@@ -71,6 +75,13 @@ static int snd_rpi_iqaudio_post_dapm_eve + return 0; + } + ++static const struct snd_kcontrol_new dapm_controls[] = { ++ SOC_DAPM_PIN_SWITCH("HP Jack"), ++ SOC_DAPM_PIN_SWITCH("MIC Jack"), ++ SOC_DAPM_PIN_SWITCH("Onboard MIC"), ++ SOC_DAPM_PIN_SWITCH("AUX Jack"), ++}; ++ + static const struct snd_soc_dapm_widget dapm_widgets[] = { + SND_SOC_DAPM_HP("HP Jack", NULL), + SND_SOC_DAPM_MIC("MIC Jack", NULL), +@@ -87,14 +98,14 @@ static const struct snd_soc_dapm_route a + {"HP Jack", NULL, "HPR"}, + {"HP Jack", NULL, "PLL Control"}, + +- {"AUX Jack", NULL, "AUXR"}, +- {"AUX Jack", NULL, "AUXL"}, ++ {"AUXR", NULL, "AUX Jack"}, ++ {"AUXL", NULL, "AUX Jack"}, + {"AUX Jack", NULL, "PLL Control"}, + + /* Assume Mic1 is linked to Headset and Mic2 to on-board mic */ +- {"MIC Jack", NULL, "MIC1"}, ++ {"MIC1", NULL, "MIC Jack"}, + {"MIC Jack", NULL, "PLL Control"}, +- {"Onboard MIC", NULL, "MIC2"}, ++ {"MIC2", NULL, "Onboard MIC"}, + {"Onboard MIC", NULL, "PLL Control"}, + }; + +@@ -106,6 +117,16 @@ static int snd_rpi_iqaudio_codec_init(st + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int ret; + ++ /* ++ * Disable AUX Jack Pin by default to prevent PLL being enabled at ++ * startup. This avoids holding the PLL to a fixed SR config for ++ * subsequent streams. ++ * ++ * This pin can still be enabled later, as required by user-space. ++ */ ++ snd_soc_dapm_disable_pin(&rtd->card->dapm, "AUX Jack"); ++ snd_soc_dapm_sync(&rtd->card->dapm); ++ + /* Set bclk ratio to align with codec's BCLK rate */ + ret = snd_soc_dai_set_bclk_ratio(cpu_dai, 64); + if (ret) { +@@ -168,6 +189,8 @@ static struct snd_soc_card snd_rpi_iqaud + .owner = THIS_MODULE, + .dai_link = snd_rpi_iqaudio_codec_dai, + .num_links = ARRAY_SIZE(snd_rpi_iqaudio_codec_dai), ++ .controls = dapm_controls, ++ .num_controls = ARRAY_SIZE(dapm_controls), + .dapm_widgets = dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(dapm_widgets), + .dapm_routes = audio_map, +@@ -204,7 +227,7 @@ static int snd_rpi_iqaudio_codec_probe(s + + if (of_property_read_string(pdev->dev.of_node, + "dai_stream_name", &dai->stream_name)) +- dai->stream_name = "IQaudIO CODEC HiFi v1.1"; ++ dai->stream_name = "IQaudIO CODEC HiFi v1.2"; + + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0464-staging-bcm2835-audio-don-t-initialize-memory-twice.patch b/target/linux/brcm2708/patches-4.19/950-0464-staging-bcm2835-audio-don-t-initialize-memory-twice.patch deleted file mode 100644 index 239712fac7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0464-staging-bcm2835-audio-don-t-initialize-memory-twice.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 7250c9d3d3f1b861d8f0c6220a81a465e45d70eb Mon Sep 17 00:00:00 2001 -From: Nicolas Saenz Julienne -Date: Wed, 17 Oct 2018 21:01:51 +0200 -Subject: [PATCH 464/806] staging: bcm2835-audio: don't initialize memory twice - -commit 2e5f59fb77397cab3bc3d156e8be4164a67d32ef upstream. - -The memory is being allocated with devres_alloc(), wich ultimately uses -__GFP_ZERO to call kmalloc. We don't need to zero the memory area again -in bcm2835-audio. - -Signed-off-by: Nicolas Saenz Julienne -Reviewed-by: Takashi Iwai -Acked-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -39,8 +39,6 @@ static int bcm2835_devm_add_vchi_ctx(str - if (!vchi_ctx) - return -ENOMEM; - -- memset(vchi_ctx, 0, sizeof(*vchi_ctx)); -- - ret = bcm2835_new_vchi_ctx(dev, vchi_ctx); - if (ret) { - devres_free(vchi_ctx); diff --git a/target/linux/brcm2708/patches-4.19/950-0465-staging-bcm2835-audio-reorder-variable-declarations-.patch b/target/linux/brcm2708/patches-4.19/950-0465-staging-bcm2835-audio-reorder-variable-declarations-.patch deleted file mode 100644 index b00e632124..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0465-staging-bcm2835-audio-reorder-variable-declarations-.patch +++ /dev/null @@ -1,118 +0,0 @@ -From 604f0019cc1eaed6a316d7875fe697e53f5f105c Mon Sep 17 00:00:00 2001 -From: Nicolas Saenz Julienne -Date: Wed, 17 Oct 2018 21:01:52 +0200 -Subject: [PATCH 465/806] staging: bcm2835-audio: reorder variable declarations - & remove trivial comments - -commit d048385a070552ae819f99f05bd03ec41072783d upstream. - -When it comes to declaring variables it's preferred, when possible, to -use an inverted tree organization scheme. - -Also, removes some comments that were useless. - -Signed-off-by: Nicolas Saenz Julienne -Reviewed-by: Takashi Iwai -Acked-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 10 ++-------- - .../vc04_services/bcm2835-audio/bcm2835-vchiq.c | 4 ++-- - .../staging/vc04_services/bcm2835-audio/bcm2835.c | 14 +++++++------- - 3 files changed, 11 insertions(+), 17 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -164,14 +164,11 @@ static int snd_bcm2835_playback_spdif_op - return snd_bcm2835_playback_open_generic(substream, 1); - } - --/* close callback */ - static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream) - { -- /* the hardware-specific codes will be here */ -- -- struct bcm2835_chip *chip; -- struct snd_pcm_runtime *runtime; - struct bcm2835_alsa_stream *alsa_stream; -+ struct snd_pcm_runtime *runtime; -+ struct bcm2835_chip *chip; - - chip = snd_pcm_substream_chip(substream); - mutex_lock(&chip->audio_mutex); -@@ -195,20 +192,17 @@ static int snd_bcm2835_playback_close(st - return 0; - } - --/* hw_params callback */ - static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) - { - return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); - } - --/* hw_free callback */ - static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream) - { - return snd_pcm_lib_free_pages(substream); - } - --/* prepare callback */ - static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream) - { - struct bcm2835_chip *chip = snd_pcm_substream_chip(substream); ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -94,9 +94,9 @@ static void audio_vchi_callback(void *pa - void *msg_handle) - { - struct bcm2835_audio_instance *instance = param; -- int status; -- int msg_len; - struct vc_audio_msg m; -+ int msg_len; -+ int status; - - if (reason != VCHI_CALLBACK_MSG_AVAILABLE) - return; ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -161,8 +161,8 @@ static int snd_add_child_device(struct d - struct bcm2835_audio_driver *audio_driver, - u32 numchans) - { -- struct snd_card *card; - struct bcm2835_chip *chip; -+ struct snd_card *card; - int err; - - err = snd_card_new(dev, -1, NULL, THIS_MODULE, sizeof(*chip), &card); -@@ -225,12 +225,12 @@ static int snd_add_child_device(struct d - - static int snd_add_child_devices(struct device *device, u32 numchans) - { -- int i; -- int count_devices = 0; -- int minchannels = 0; -- int extrachannels = 0; - int extrachannels_per_driver = 0; - int extrachannels_remainder = 0; -+ int count_devices = 0; -+ int extrachannels = 0; -+ int minchannels = 0; -+ int i; - - for (i = 0; i < ARRAY_SIZE(children_devices); i++) - if (*children_devices[i].is_enabled) -@@ -258,9 +258,9 @@ static int snd_add_child_devices(struct - extrachannels_remainder); - - for (i = 0; i < ARRAY_SIZE(children_devices); i++) { -- int err; -- int numchannels_this_device; - struct bcm2835_audio_driver *audio_driver; -+ int numchannels_this_device; -+ int err; - - if (!*children_devices[i].is_enabled) - continue; diff --git a/target/linux/brcm2708/patches-4.19/950-0465-staging-bcm2835-codec-Convert-V4L2-nsec-timestamps-t.patch b/target/linux/brcm2708/patches-4.19/950-0465-staging-bcm2835-codec-Convert-V4L2-nsec-timestamps-t.patch new file mode 100644 index 0000000000..48bb146741 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0465-staging-bcm2835-codec-Convert-V4L2-nsec-timestamps-t.patch @@ -0,0 +1,46 @@ +From 3da653227926705fe0dcb7b6057be1ca811f47b8 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 10 May 2019 14:11:58 +0100 +Subject: [PATCH] staging: bcm2835-codec: Convert V4L2 nsec timestamps + to MMAL usec + +V4L2 uses nsecs, whilst MMAL uses usecs, but the code wasn't converting +between them. This upsets video encode rate control. + +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -823,7 +823,8 @@ static void op_buffer_cb(struct vchiq_mm + vb2->flags |= V4L2_BUF_FLAG_LAST; + } + +- vb2->vb2_buf.timestamp = mmal_buf->pts; ++ /* vb2 timestamps in nsecs, mmal in usecs */ ++ vb2->vb2_buf.timestamp = mmal_buf->pts * 1000; + + vb2_set_plane_payload(&vb2->vb2_buf, 0, mmal_buf->length); + if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) +@@ -847,6 +848,7 @@ static void op_buffer_cb(struct vchiq_mm + static void vb2_to_mmal_buffer(struct m2m_mmal_buffer *buf, + struct vb2_v4l2_buffer *vb2) + { ++ u64 pts; + buf->mmal.mmal_flags = 0; + if (vb2->flags & V4L2_BUF_FLAG_KEYFRAME) + buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_KEYFRAME; +@@ -869,7 +871,10 @@ static void vb2_to_mmal_buffer(struct m2 + if (!buf->mmal.length || vb2->flags & V4L2_BUF_FLAG_LAST) + buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_EOS; + +- buf->mmal.pts = vb2->vb2_buf.timestamp; ++ /* vb2 timestamps in nsecs, mmal in usecs */ ++ pts = vb2->vb2_buf.timestamp; ++ do_div(pts, 1000); ++ buf->mmal.pts = pts; + buf->mmal.dts = MMAL_TIME_UNKNOWN; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0466-staging-bcm2835-audio-use-anonymous-union-in-struct-.patch b/target/linux/brcm2708/patches-4.19/950-0466-staging-bcm2835-audio-use-anonymous-union-in-struct-.patch deleted file mode 100644 index b41a233e04..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0466-staging-bcm2835-audio-use-anonymous-union-in-struct-.patch +++ /dev/null @@ -1,105 +0,0 @@ -From 23b89436030e64196a1bc317901d08edd54fb772 Mon Sep 17 00:00:00 2001 -From: Nicolas Saenz Julienne -Date: Wed, 17 Oct 2018 21:01:53 +0200 -Subject: [PATCH 466/806] staging: bcm2835-audio: use anonymous union in struct - vc_audio_msg - -commit 9c2eaf7da855d314a369d48b9cbf8ac80717a1d0 upstream. - -In this case explicitly naming the union doesn't help overall code -comprehension and clutters it. - -Signed-off-by: Nicolas Saenz Julienne -Reviewed-by: Takashi Iwai -Acked-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../bcm2835-audio/bcm2835-vchiq.c | 30 +++++++++---------- - .../bcm2835-audio/vc_vchi_audioserv_defs.h | 2 +- - 2 files changed, 16 insertions(+), 16 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -104,15 +104,15 @@ static void audio_vchi_callback(void *pa - status = vchi_msg_dequeue(instance->vchi_handle, - &m, sizeof(m), &msg_len, VCHI_FLAGS_NONE); - if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { -- instance->result = m.u.result.success; -+ instance->result = m.result.success; - complete(&instance->msg_avail_comp); - } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { -- if (m.u.complete.cookie1 != VC_AUDIO_WRITE_COOKIE1 || -- m.u.complete.cookie2 != VC_AUDIO_WRITE_COOKIE2) -+ if (m.complete.cookie1 != VC_AUDIO_WRITE_COOKIE1 || -+ m.complete.cookie2 != VC_AUDIO_WRITE_COOKIE2) - dev_err(instance->dev, "invalid cookie\n"); - else - bcm2835_playback_fifo(instance->alsa_stream, -- m.u.complete.count); -+ m.complete.count); - } else { - dev_err(instance->dev, "unexpected callback type=%d\n", m.type); - } -@@ -257,11 +257,11 @@ int bcm2835_audio_set_ctls(struct bcm283 - struct vc_audio_msg m = {}; - - m.type = VC_AUDIO_MSG_TYPE_CONTROL; -- m.u.control.dest = chip->dest; -+ m.control.dest = chip->dest; - if (!chip->mute) -- m.u.control.volume = CHIP_MIN_VOLUME; -+ m.control.volume = CHIP_MIN_VOLUME; - else -- m.u.control.volume = alsa2chip(chip->volume); -+ m.control.volume = alsa2chip(chip->volume); - - return bcm2835_audio_send_msg(alsa_stream->instance, &m, true); - } -@@ -272,9 +272,9 @@ int bcm2835_audio_set_params(struct bcm2 - { - struct vc_audio_msg m = { - .type = VC_AUDIO_MSG_TYPE_CONFIG, -- .u.config.channels = channels, -- .u.config.samplerate = samplerate, -- .u.config.bps = bps, -+ .config.channels = channels, -+ .config.samplerate = samplerate, -+ .config.bps = bps, - }; - int err; - -@@ -302,7 +302,7 @@ int bcm2835_audio_drain(struct bcm2835_a - { - struct vc_audio_msg m = { - .type = VC_AUDIO_MSG_TYPE_STOP, -- .u.stop.draining = 1, -+ .stop.draining = 1, - }; - - return bcm2835_audio_send_msg(alsa_stream->instance, &m, false); -@@ -330,10 +330,10 @@ int bcm2835_audio_write(struct bcm2835_a - struct bcm2835_audio_instance *instance = alsa_stream->instance; - struct vc_audio_msg m = { - .type = VC_AUDIO_MSG_TYPE_WRITE, -- .u.write.count = size, -- .u.write.max_packet = instance->max_packet, -- .u.write.cookie1 = VC_AUDIO_WRITE_COOKIE1, -- .u.write.cookie2 = VC_AUDIO_WRITE_COOKIE2, -+ .write.count = size, -+ .write.max_packet = instance->max_packet, -+ .write.cookie1 = VC_AUDIO_WRITE_COOKIE1, -+ .write.cookie2 = VC_AUDIO_WRITE_COOKIE2, - }; - unsigned int count; - int err, status; ---- a/drivers/staging/vc04_services/bcm2835-audio/vc_vchi_audioserv_defs.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/vc_vchi_audioserv_defs.h -@@ -93,7 +93,7 @@ struct vc_audio_msg { - struct vc_audio_write write; - struct vc_audio_result result; - struct vc_audio_complete complete; -- } u; -+ }; - }; - - #endif /* _VC_AUDIO_DEFS_H_ */ diff --git a/target/linux/brcm2708/patches-4.19/950-0466-staging-bcm2835-codec-Add-support-for-setting-S_PARM.patch b/target/linux/brcm2708/patches-4.19/950-0466-staging-bcm2835-codec-Add-support-for-setting-S_PARM.patch new file mode 100644 index 0000000000..ac75d4768f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0466-staging-bcm2835-codec-Add-support-for-setting-S_PARM.patch @@ -0,0 +1,118 @@ +From 67c1f9dd0253a1175f77e801b19bd9d923225f9c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 10 May 2019 14:13:11 +0100 +Subject: [PATCH] staging: bcm2835-codec: Add support for setting + S_PARM and G_PARM + +Video encode can use the frame rate for rate control calculations, +therefore plumb it through from V4L2's [S|G]_PARM ioctl. + +Signed-off-by: Dave Stevenson +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 52 +++++++++++++++++-- + 1 file changed, 48 insertions(+), 4 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -447,6 +447,8 @@ struct bcm2835_codec_ctx { + /* Source and destination queue data */ + struct bcm2835_codec_q_data q_data[2]; + s32 bitrate; ++ unsigned int framerate_num; ++ unsigned int framerate_denom; + + bool aborting; + int num_ip_buffers; +@@ -610,8 +612,8 @@ static void setup_mmal_port_format(struc + port->es.video.height = q_data->height; + port->es.video.crop.width = q_data->crop_width; + port->es.video.crop.height = q_data->crop_height; +- port->es.video.frame_rate.num = 0; +- port->es.video.frame_rate.den = 1; ++ port->es.video.frame_rate.num = ctx->framerate_num; ++ port->es.video.frame_rate.den = ctx->framerate_denom; + } else { + /* Compressed format - leave resolution as 0 for decode */ + if (ctx->dev->role == DECODE) { +@@ -625,9 +627,9 @@ static void setup_mmal_port_format(struc + port->es.video.crop.width = q_data->crop_width; + port->es.video.crop.height = q_data->crop_height; + port->format.bitrate = ctx->bitrate; ++ port->es.video.frame_rate.num = ctx->framerate_num; ++ port->es.video.frame_rate.den = ctx->framerate_denom; + } +- port->es.video.frame_rate.num = 0; +- port->es.video.frame_rate.den = 1; + } + port->es.video.crop.x = 0; + port->es.video.crop.y = 0; +@@ -1361,6 +1363,41 @@ static int vidioc_s_selection(struct fil + return 0; + } + ++static int vidioc_s_parm(struct file *file, void *priv, ++ struct v4l2_streamparm *parm) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ ++ if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) ++ return -EINVAL; ++ ++ ctx->framerate_num = ++ parm->parm.output.timeperframe.denominator; ++ ctx->framerate_denom = ++ parm->parm.output.timeperframe.numerator; ++ ++ parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME; ++ ++ return 0; ++} ++ ++static int vidioc_g_parm(struct file *file, void *priv, ++ struct v4l2_streamparm *parm) ++{ ++ struct bcm2835_codec_ctx *ctx = file2ctx(file); ++ ++ if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) ++ return -EINVAL; ++ ++ parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME; ++ parm->parm.output.timeperframe.denominator = ++ ctx->framerate_num; ++ parm->parm.output.timeperframe.numerator = ++ ctx->framerate_denom; ++ ++ return 0; ++} ++ + static int vidioc_subscribe_evt(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub) + { +@@ -1725,6 +1762,9 @@ static const struct v4l2_ioctl_ops bcm28 + .vidioc_g_selection = vidioc_g_selection, + .vidioc_s_selection = vidioc_s_selection, + ++ .vidioc_g_parm = vidioc_g_parm, ++ .vidioc_s_parm = vidioc_s_parm, ++ + .vidioc_subscribe_event = vidioc_subscribe_evt, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + +@@ -2546,6 +2586,8 @@ static int bcm2835_codec_create(struct p + case DECODE: + v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD); + v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); ++ v4l2_disable_ioctl(vfd, VIDIOC_S_PARM); ++ v4l2_disable_ioctl(vfd, VIDIOC_G_PARM); + video_nr = decode_video_nr; + break; + case ENCODE: +@@ -2558,6 +2600,8 @@ static int bcm2835_codec_create(struct p + v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); + v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); + v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); ++ v4l2_disable_ioctl(vfd, VIDIOC_S_PARM); ++ v4l2_disable_ioctl(vfd, VIDIOC_G_PARM); + video_nr = isp_video_nr; + break; + default: diff --git a/target/linux/brcm2708/patches-4.19/950-0467-staging-bcm2835-audio-more-generic-probe-function-na.patch b/target/linux/brcm2708/patches-4.19/950-0467-staging-bcm2835-audio-more-generic-probe-function-na.patch deleted file mode 100644 index 510d2b5f2a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0467-staging-bcm2835-audio-more-generic-probe-function-na.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 0b7d959b0d0c18959c66696844a1c9956370ab99 Mon Sep 17 00:00:00 2001 -From: Nicolas Saenz Julienne -Date: Wed, 17 Oct 2018 21:01:54 +0200 -Subject: [PATCH 467/806] staging: bcm2835-audio: more generic probe function - name - -commit 96f3bd8ae6516898c7b411ecb87064bb0dd25415 upstream. - -There will only be one probe function, there is no use for appendig -"_dt" the end of the name. - -Signed-off-by: Nicolas Saenz Julienne -Reviewed-by: Takashi Iwai -Acked-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -291,7 +291,7 @@ static int snd_add_child_devices(struct - return 0; - } - --static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) -+static int snd_bcm2835_alsa_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; - u32 numchans; -@@ -344,7 +344,7 @@ static const struct of_device_id snd_bcm - MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); - - static struct platform_driver bcm2835_alsa0_driver = { -- .probe = snd_bcm2835_alsa_probe_dt, -+ .probe = snd_bcm2835_alsa_probe, - #ifdef CONFIG_PM - .suspend = snd_bcm2835_alsa_suspend, - .resume = snd_bcm2835_alsa_resume, diff --git a/target/linux/brcm2708/patches-4.19/950-0467-w1-w1-gpio-Make-GPIO-an-output-for-strong-pullup.patch b/target/linux/brcm2708/patches-4.19/950-0467-w1-w1-gpio-Make-GPIO-an-output-for-strong-pullup.patch new file mode 100644 index 0000000000..6229fdc38d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0467-w1-w1-gpio-Make-GPIO-an-output-for-strong-pullup.patch @@ -0,0 +1,27 @@ +From afea1f84cbda94c47ba4a8f84d16c4330e145a0a Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 12 Jun 2019 17:15:05 +0100 +Subject: [PATCH] w1: w1-gpio: Make GPIO an output for strong pullup + +The logic to drive the data line high to implement a strong pullup +assumed that the pin was already an output - setting a value does +not change an input. + +See: https://github.com/raspberrypi/firmware/issues/1143 + +Signed-off-by: Phil Elwell +--- + drivers/w1/masters/w1-gpio.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/w1/masters/w1-gpio.c ++++ b/drivers/w1/masters/w1-gpio.c +@@ -33,7 +33,7 @@ static u8 w1_gpio_set_pullup(void *data, + * This will OVERRIDE open drain emulation and force-pull + * the line high for some time. + */ +- gpiod_set_raw_value(pdata->gpiod, 1); ++ gpiod_direction_output_raw(pdata->gpiod, 1); + msleep(pdata->pullup_duration); + /* + * This will simply set the line as input since we are doing diff --git a/target/linux/brcm2708/patches-4.19/950-0468-overlays-Update-w1-gpio-and-w1-gpio-pullup.patch b/target/linux/brcm2708/patches-4.19/950-0468-overlays-Update-w1-gpio-and-w1-gpio-pullup.patch new file mode 100644 index 0000000000..f19a6380ce --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0468-overlays-Update-w1-gpio-and-w1-gpio-pullup.patch @@ -0,0 +1,78 @@ +From 531ae7af75b2be2867814693f069fb51e3155341 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 12 Jun 2019 17:32:11 +0100 +Subject: [PATCH] overlays: Update w1-gpio and w1-gpio-pullup + +The parasitic power (power on data) feature is now enabled by +default in the w1-gpio driver, so update the README and make the +"pullup" parameter a no-op. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 9 ++------- + arch/arm/boot/dts/overlays/w1-gpio-overlay.dts | 3 +-- + arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts | 3 +-- + 3 files changed, 4 insertions(+), 11 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -2261,9 +2261,7 @@ Info: Configures the w1-gpio Onewire i + Use this overlay if you *don't* need a GPIO to drive an external pullup. + Load: dtoverlay=w1-gpio,= + Params: gpiopin GPIO for I/O (default "4") +- +- pullup Non-zero, "on", or "y" to enable the parasitic +- power (2-wire, power-on-data) feature ++ pullup Now enabled by default (ignored) + + + Name: w1-gpio-pullup +@@ -2271,11 +2269,8 @@ Info: Configures the w1-gpio Onewire i + Use this overlay if you *do* need a GPIO to drive an external pullup. + Load: dtoverlay=w1-gpio-pullup,= + Params: gpiopin GPIO for I/O (default "4") +- +- pullup Non-zero, "on", or "y" to enable the parasitic +- power (2-wire, power-on-data) feature +- + extpullup GPIO for external pullup (default "5") ++ pullup Now enabled by default (ignored) + + + Name: wittypi +--- a/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts +@@ -14,7 +14,6 @@ + pinctrl-names = "default"; + pinctrl-0 = <&w1_pins>; + gpios = <&gpio 4 0>; +- rpi,parasitic-power = <0>; + status = "okay"; + }; + }; +@@ -36,6 +35,6 @@ + <&w1>,"reg:0", + <&w1_pins>,"brcm,pins:0", + <&w1_pins>,"reg:0"; +- pullup = <&w1>,"rpi,parasitic-power:0"; ++ pullup; // Silently ignore unneeded parameter + }; + }; +--- a/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts ++++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts +@@ -14,7 +14,6 @@ + pinctrl-names = "default"; + pinctrl-0 = <&w1_pins>; + gpios = <&gpio 4 0>, <&gpio 5 1>; +- rpi,parasitic-power = <0>; + status = "okay"; + }; + }; +@@ -38,6 +37,6 @@ + <&w1_pins>,"reg:0"; + extpullup = <&w1>,"gpios:16", + <&w1_pins>,"brcm,pins:4"; +- pullup = <&w1>,"rpi,parasitic-power:0"; ++ pullup; // Silently ignore unneeded parameter + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0468-staging-bcm2835-audio-rename-platform_driver-structu.patch b/target/linux/brcm2708/patches-4.19/950-0468-staging-bcm2835-audio-rename-platform_driver-structu.patch deleted file mode 100644 index a25b5923c8..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0468-staging-bcm2835-audio-rename-platform_driver-structu.patch +++ /dev/null @@ -1,47 +0,0 @@ -From b06f01038711efc5182267cfc68e358a89ee2502 Mon Sep 17 00:00:00 2001 -From: Nicolas Saenz Julienne -Date: Wed, 17 Oct 2018 21:01:55 +0200 -Subject: [PATCH 468/806] staging: bcm2835-audio: rename platform_driver - structure - -commit 82cdc0c6b6faf877e2aecb957cffa9cb578cc572 upstream. - -It was called bcm2835_alsa0_driver, that "0" didn't mean much. - -Suggested-by: Takashi Iwai -Signed-off-by: Nicolas Saenz Julienne -Acked-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -343,7 +343,7 @@ static const struct of_device_id snd_bcm - }; - MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); - --static struct platform_driver bcm2835_alsa0_driver = { -+static struct platform_driver bcm2835_alsa_driver = { - .probe = snd_bcm2835_alsa_probe, - #ifdef CONFIG_PM - .suspend = snd_bcm2835_alsa_suspend, -@@ -359,7 +359,7 @@ static int bcm2835_alsa_device_init(void - { - int retval; - -- retval = platform_driver_register(&bcm2835_alsa0_driver); -+ retval = platform_driver_register(&bcm2835_alsa_driver); - if (retval) - pr_err("Error registering bcm2835_audio driver %d .\n", retval); - -@@ -368,7 +368,7 @@ static int bcm2835_alsa_device_init(void - - static void bcm2835_alsa_device_exit(void) - { -- platform_driver_unregister(&bcm2835_alsa0_driver); -+ platform_driver_unregister(&bcm2835_alsa_driver); - } - - late_initcall(bcm2835_alsa_device_init); diff --git a/target/linux/brcm2708/patches-4.19/950-0469-bcm2835-sdhost-Fix-DMA-channel-leak-on-error-remove.patch b/target/linux/brcm2708/patches-4.19/950-0469-bcm2835-sdhost-Fix-DMA-channel-leak-on-error-remove.patch new file mode 100644 index 0000000000..13ea94a130 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0469-bcm2835-sdhost-Fix-DMA-channel-leak-on-error-remove.patch @@ -0,0 +1,31 @@ +From 73623c76c8bc8c41a4afefc1eee84dfc5979d652 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 12 Jun 2019 20:45:17 +0100 +Subject: [PATCH] bcm2835-sdhost: Fix DMA channel leak on error/remove + +Signed-off-by: Phil Elwell +--- + drivers/mmc/host/bcm2835-sdhost.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/mmc/host/bcm2835-sdhost.c ++++ b/drivers/mmc/host/bcm2835-sdhost.c +@@ -2154,6 +2154,8 @@ static int bcm2835_sdhost_probe(struct p + + err: + pr_debug("bcm2835_sdhost_probe -> err %d\n", ret); ++ if (host->dma_chan_rxtx) ++ dma_release_channel(host->dma_chan_rxtx); + mmc_free_host(mmc); + + return ret; +@@ -2174,7 +2176,8 @@ static int bcm2835_sdhost_remove(struct + del_timer_sync(&host->timer); + + tasklet_kill(&host->finish_tasklet); +- ++ if (host->dma_chan_rxtx) ++ dma_release_channel(host->dma_chan_rxtx); + mmc_free_host(host->mmc); + platform_set_drvdata(pdev, NULL); + diff --git a/target/linux/brcm2708/patches-4.19/950-0469-staging-bcm2835-audio-update-TODO.patch b/target/linux/brcm2708/patches-4.19/950-0469-staging-bcm2835-audio-update-TODO.patch deleted file mode 100644 index da2a032deb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0469-staging-bcm2835-audio-update-TODO.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 56b704581afbd8d9ccd73cfa7935b6178749a3e9 Mon Sep 17 00:00:00 2001 -From: Nicolas Saenz Julienne -Date: Wed, 17 Oct 2018 21:01:56 +0200 -Subject: [PATCH 469/806] staging: bcm2835-audio: update TODO - -commit 01ec7398c56e8f1b903ecb3c5c75400e263eef43 upstream. - -The following tasks were completed or not the right solution: - -1/2- Not the proper solution, we should register a platform device in -vchiq the same way it's done with bcm2835-camera as commented here: -https://lkml.org/lkml/2018/10/16/1131 - -2/3- Fixed by Takashi Iwai here: https://lkml.org/lkml/2018/9/4/587 - -Also, adds a new task as per mailing list conversation. - -Signed-off-by: Nicolas Saenz Julienne -Acked-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../staging/vc04_services/bcm2835-audio/TODO | 25 +++---------------- - 1 file changed, 3 insertions(+), 22 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/TODO -+++ b/drivers/staging/vc04_services/bcm2835-audio/TODO -@@ -4,26 +4,7 @@ - * * - ***************************************************************************** - -+1) Revisit multi-cards options and PCM route mixer control (as per comment -+https://lkml.org/lkml/2018/9/8/200) - --1) Document the device tree node -- --The downstream tree(the tree that the driver was imported from) at --http://www.github.com/raspberrypi/linux uses this node: -- --audio: audio { -- compatible = "brcm,bcm2835-audio"; -- brcm,pwm-channels = <8>; --}; -- --Since the driver requires the use of VCHIQ, it may be useful to have a link --in the device tree to the VCHIQ driver. -- --2) Gracefully handle the case where VCHIQ is missing from the device tree or --it has not been initialized yet. -- --3) Review error handling and remove duplicate code. -- --4) Cleanup the logging mechanism. The driver should probably be using the --standard kernel logging mechanisms such as dev_info, dev_dbg, and friends. -- --5) Fix the remaining checkpatch.pl errors and warnings. -+2) Fix the remaining checkpatch.pl errors and warnings. diff --git a/target/linux/brcm2708/patches-4.19/950-0470-i2c-bcm2835-Model-Divider-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0470-i2c-bcm2835-Model-Divider-in-CCF.patch new file mode 100644 index 0000000000..dc251a60c4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0470-i2c-bcm2835-Model-Divider-in-CCF.patch @@ -0,0 +1,270 @@ +From ffbb6cc14b8fb1876b249048284a5fe30f48c693 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Sat, 8 Jun 2019 10:14:43 -0700 +Subject: [PATCH] i2c: bcm2835: Model Divider in CCF + +Commit bebff81fb8b9216eb4fba22cf910553621ae3477 upstream. + +Model the I2C bus clock divider as a part of the Core Clock Framework. +Primarily this removes the clk_get_rate() call from each transfer. +This call causes problems for slave drivers that themselves have +internal clock components that are controlled by an I2C interface. +When the slave's internal clock component is prepared, the prepare +lock is obtained, and it makes calls to the I2C subsystem to +command the hardware to activate the clock. In order to perform +the I2C transfer, this driver sets the divider, which requires +it to get the parent clock rate, which it does with clk_get_rate(). +Unfortunately, this function will try to take the clock prepare +lock, which is already held by the slave's internal clock calls +creating a deadlock. + +Modeling the divider in the CCF natively removes this dependency +and the divider value is only set upon changing the bus clock +frequency or changes in the parent clock that cascade down to this +divisor. This obviates the need to set the divider with every +transfer and avoids the deadlock described above. It also should +provide better clock debugging and save a few cycles on each +transfer due to not having to recalcuate the divider value. + +Signed-off-by: Annaliese McDermond +Acked-by: Stefan Wahren +Reviewed-by: Eric Anholt +Signed-off-by: Wolfram Sang +--- + drivers/i2c/busses/i2c-bcm2835.c | 145 ++++++++++++++++++++++++------- + 1 file changed, 114 insertions(+), 31 deletions(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -12,6 +12,8 @@ + */ + + #include ++#include ++#include + #include + #include + #include +@@ -71,9 +73,7 @@ struct bcm2835_debug { + struct bcm2835_i2c_dev { + struct device *dev; + void __iomem *regs; +- struct clk *clk; + int irq; +- u32 bus_clk_rate; + struct i2c_adapter adapter; + struct completion completion; + struct i2c_msg *curr_msg; +@@ -164,12 +164,17 @@ static inline u32 bcm2835_i2c_readl(stru + return readl(i2c_dev->regs + reg); + } + +-static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev) ++#define to_clk_bcm2835_i2c(_hw) container_of(_hw, struct clk_bcm2835_i2c, hw) ++struct clk_bcm2835_i2c { ++ struct clk_hw hw; ++ struct bcm2835_i2c_dev *i2c_dev; ++}; ++ ++static int clk_bcm2835_i2c_calc_divider(unsigned long rate, ++ unsigned long parent_rate) + { +- u32 divider, redl, fedl; ++ u32 divider = DIV_ROUND_UP(parent_rate, rate); + +- divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), +- i2c_dev->bus_clk_rate); + /* + * Per the datasheet, the register is always interpreted as an even + * number, by rounding down. In other words, the LSB is ignored. So, +@@ -178,12 +183,23 @@ static int bcm2835_i2c_set_divider(struc + if (divider & 1) + divider++; + if ((divider < BCM2835_I2C_CDIV_MIN) || +- (divider > BCM2835_I2C_CDIV_MAX)) { +- dev_err_ratelimited(i2c_dev->dev, "Invalid clock-frequency\n"); ++ (divider > BCM2835_I2C_CDIV_MAX)) + return -EINVAL; +- } + +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); ++ return divider; ++} ++ ++static int clk_bcm2835_i2c_set_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct clk_bcm2835_i2c *div = to_clk_bcm2835_i2c(hw); ++ u32 redl, fedl; ++ u32 divider = clk_bcm2835_i2c_calc_divider(rate, parent_rate); ++ ++ if (divider == -EINVAL) ++ return -EINVAL; ++ ++ bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_DIV, divider); + + /* + * Number of core clocks to wait after falling edge before +@@ -198,12 +214,62 @@ static int bcm2835_i2c_set_divider(struc + */ + redl = max(divider / 4, 1u); + +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DEL, ++ bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_DEL, + (fedl << BCM2835_I2C_FEDL_SHIFT) | + (redl << BCM2835_I2C_REDL_SHIFT)); + return 0; + } + ++static long clk_bcm2835_i2c_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ u32 divider = clk_bcm2835_i2c_calc_divider(rate, *parent_rate); ++ ++ return DIV_ROUND_UP(*parent_rate, divider); ++} ++ ++static unsigned long clk_bcm2835_i2c_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct clk_bcm2835_i2c *div = to_clk_bcm2835_i2c(hw); ++ u32 divider = bcm2835_i2c_readl(div->i2c_dev, BCM2835_I2C_DIV); ++ ++ return DIV_ROUND_UP(parent_rate, divider); ++} ++ ++static const struct clk_ops clk_bcm2835_i2c_ops = { ++ .set_rate = clk_bcm2835_i2c_set_rate, ++ .round_rate = clk_bcm2835_i2c_round_rate, ++ .recalc_rate = clk_bcm2835_i2c_recalc_rate, ++}; ++ ++static struct clk *bcm2835_i2c_register_div(struct device *dev, ++ const char *mclk_name, ++ struct bcm2835_i2c_dev *i2c_dev) ++{ ++ struct clk_init_data init; ++ struct clk_bcm2835_i2c *priv; ++ char name[32]; ++ ++ snprintf(name, sizeof(name), "%s_div", dev_name(dev)); ++ ++ init.ops = &clk_bcm2835_i2c_ops; ++ init.name = name; ++ init.parent_names = (const char* []) { mclk_name }; ++ init.num_parents = 1; ++ init.flags = 0; ++ ++ priv = devm_kzalloc(dev, sizeof(struct clk_bcm2835_i2c), GFP_KERNEL); ++ if (priv == NULL) ++ return ERR_PTR(-ENOMEM); ++ ++ priv->hw.init = &init; ++ priv->i2c_dev = i2c_dev; ++ ++ clk_hw_register_clkdev(&priv->hw, "div", dev_name(dev)); ++ return devm_clk_register(dev, &priv->hw); ++} ++ + static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev) + { + u32 val; +@@ -363,7 +429,7 @@ static int bcm2835_i2c_xfer(struct i2c_a + { + struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); + unsigned long time_left; +- int i, ret; ++ int i; + + if (debug) + i2c_dev->debug_num_msgs = num; +@@ -379,10 +445,6 @@ static int bcm2835_i2c_xfer(struct i2c_a + return -EOPNOTSUPP; + } + +- ret = bcm2835_i2c_set_divider(i2c_dev); +- if (ret) +- return ret; +- + i2c_dev->curr_msg = msgs; + i2c_dev->num_msgs = num; + reinit_completion(&i2c_dev->completion); +@@ -443,6 +505,9 @@ static int bcm2835_i2c_probe(struct plat + struct resource *mem, *irq; + int ret; + struct i2c_adapter *adap; ++ const char *mclk_name; ++ struct clk *bus_clk; ++ u32 bus_clk_rate; + + i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); + if (!i2c_dev) +@@ -456,21 +521,6 @@ static int bcm2835_i2c_probe(struct plat + if (IS_ERR(i2c_dev->regs)) + return PTR_ERR(i2c_dev->regs); + +- i2c_dev->clk = devm_clk_get(&pdev->dev, NULL); +- if (IS_ERR(i2c_dev->clk)) { +- if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER) +- dev_err(&pdev->dev, "Could not get clock\n"); +- return PTR_ERR(i2c_dev->clk); +- } +- +- ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", +- &i2c_dev->bus_clk_rate); +- if (ret < 0) { +- dev_warn(&pdev->dev, +- "Could not read clock-frequency property\n"); +- i2c_dev->bus_clk_rate = 100000; +- } +- + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(&pdev->dev, "No IRQ resource\n"); +@@ -485,6 +535,35 @@ static int bcm2835_i2c_probe(struct plat + return -ENODEV; + } + ++ mclk_name = of_clk_get_parent_name(pdev->dev.of_node, 0); ++ ++ bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk_name, i2c_dev); ++ ++ if (IS_ERR(bus_clk)) { ++ dev_err(&pdev->dev, "Could not register clock\n"); ++ return PTR_ERR(bus_clk); ++ } ++ ++ ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", ++ &bus_clk_rate); ++ if (ret < 0) { ++ dev_warn(&pdev->dev, ++ "Could not read clock-frequency property\n"); ++ bus_clk_rate = 100000; ++ } ++ ++ ret = clk_set_rate_exclusive(bus_clk, bus_clk_rate); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "Could not set clock frequency\n"); ++ return ret; ++ } ++ ++ ret = clk_prepare_enable(bus_clk); ++ if (ret) { ++ dev_err(&pdev->dev, "Couldn't prepare clock"); ++ return ret; ++ } ++ + adap = &i2c_dev->adapter; + i2c_set_adapdata(adap, i2c_dev); + adap->owner = THIS_MODULE; +@@ -507,6 +586,10 @@ static int bcm2835_i2c_probe(struct plat + static int bcm2835_i2c_remove(struct platform_device *pdev) + { + struct bcm2835_i2c_dev *i2c_dev = platform_get_drvdata(pdev); ++ struct clk *bus_clk = devm_clk_get(i2c_dev->dev, "div"); ++ ++ clk_rate_exclusive_put(bus_clk); ++ clk_disable_unprepare(bus_clk); + + free_irq(i2c_dev->irq, i2c_dev); + i2c_del_adapter(&i2c_dev->adapter); diff --git a/target/linux/brcm2708/patches-4.19/950-0470-staging-bcm2835-audio-interpolate-audio-delay.patch b/target/linux/brcm2708/patches-4.19/950-0470-staging-bcm2835-audio-interpolate-audio-delay.patch deleted file mode 100644 index d5da293593..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0470-staging-bcm2835-audio-interpolate-audio-delay.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 2ba82d9516203ce41f33e98adb667bedee3622bc Mon Sep 17 00:00:00 2001 -From: Mike Brady -Date: Mon, 22 Oct 2018 20:17:08 +0100 -Subject: [PATCH 470/806] staging: bcm2835-audio: interpolate audio delay - -commit a105a3a72824e0ac685a0711a67e4dbe29de62d0 upstream. - -When the BCM2835 audio output is used, userspace sees a jitter up to 10ms -in the audio position, aka "delay" -- the number of frames that must -be output before a new frame would be played. -Make this a bit nicer for userspace by interpolating the position -using the CPU clock. -The overhead is small -- an extra ktime_get() every time a GPU message -is sent -- and another call and a few calculations whenever the delay -is sought from userland. -At 48,000 frames per second, i.e. approximately 20 microseconds per -frame, it would take a clock inaccuracy of -20 microseconds in 10 milliseconds -- 2,000 parts per million -- -to result in an inaccurate estimate, whereas -crystal- or resonator-based clocks typically have an -inaccuracy of 10s to 100s of parts per million. - -Signed-off-by: Mike Brady -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 20 +++++++++++++++++++ - .../vc04_services/bcm2835-audio/bcm2835.h | 1 + - 2 files changed, 21 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -74,6 +74,7 @@ void bcm2835_playback_fifo(struct bcm283 - atomic_set(&alsa_stream->pos, pos); - - alsa_stream->period_offset += bytes; -+ alsa_stream->interpolate_start = ktime_get(); - if (alsa_stream->period_offset >= alsa_stream->period_size) { - alsa_stream->period_offset %= alsa_stream->period_size; - snd_pcm_period_elapsed(substream); -@@ -237,6 +238,7 @@ static int snd_bcm2835_pcm_prepare(struc - atomic_set(&alsa_stream->pos, 0); - alsa_stream->period_offset = 0; - alsa_stream->draining = false; -+ alsa_stream->interpolate_start = ktime_get(); - - return 0; - } -@@ -286,6 +288,24 @@ snd_bcm2835_pcm_pointer(struct snd_pcm_s - { - struct snd_pcm_runtime *runtime = substream->runtime; - struct bcm2835_alsa_stream *alsa_stream = runtime->private_data; -+ ktime_t now = ktime_get(); -+ -+ /* Give userspace better delay reporting by interpolating between GPU -+ * notifications, assuming audio speed is close enough to the clock -+ * used for ktime -+ */ -+ -+ if ((ktime_to_ns(alsa_stream->interpolate_start)) && -+ (ktime_compare(alsa_stream->interpolate_start, now) < 0)) { -+ u64 interval = -+ (ktime_to_ns(ktime_sub(now, -+ alsa_stream->interpolate_start))); -+ u64 frames_output_in_interval = -+ div_u64((interval * runtime->rate), 1000000000); -+ snd_pcm_sframes_t frames_output_in_interval_sized = -+ -frames_output_in_interval; -+ runtime->delay = frames_output_in_interval_sized; -+ } - - return snd_pcm_indirect_playback_pointer(substream, - &alsa_stream->pcm_indirect, ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -78,6 +78,7 @@ struct bcm2835_alsa_stream { - unsigned int period_offset; - unsigned int buffer_size; - unsigned int period_size; -+ ktime_t interpolate_start; - - struct bcm2835_audio_instance *instance; - int idx; diff --git a/target/linux/brcm2708/patches-4.19/950-0471-staging-bcm2835-audio-Enable-compile-test.patch b/target/linux/brcm2708/patches-4.19/950-0471-staging-bcm2835-audio-Enable-compile-test.patch deleted file mode 100644 index 086f9e4c68..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0471-staging-bcm2835-audio-Enable-compile-test.patch +++ /dev/null @@ -1,27 +0,0 @@ -From b338fbb56955b74b5f41a623aceab4d74ba7c173 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Thu, 6 Dec 2018 19:28:56 +0100 -Subject: [PATCH 471/806] staging: bcm2835-audio: Enable compile test - -commit 458d4866a34d0c129ffc3bd56345b2166ba46d77 upstream. - -Enable the compilation test for bcm2835-audio to gain more build coverage. - -Signed-off-by: Stefan Wahren -Reviewed-by: Nicolas Saenz Julienne -Reviewed-by: Dan Carpenter -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/Kconfig -+++ b/drivers/staging/vc04_services/bcm2835-audio/Kconfig -@@ -1,6 +1,6 @@ - config SND_BCM2835 - tristate "BCM2835 Audio" -- depends on ARCH_BCM2835 && SND -+ depends on (ARCH_BCM2835 || COMPILE_TEST) && SND - select SND_PCM - select BCM2835_VCHIQ - help diff --git a/target/linux/brcm2708/patches-4.19/950-0471-staging-vc04_services-Use-correct-cache-line-size.patch b/target/linux/brcm2708/patches-4.19/950-0471-staging-vc04_services-Use-correct-cache-line-size.patch new file mode 100644 index 0000000000..c6b0606087 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0471-staging-vc04_services-Use-correct-cache-line-size.patch @@ -0,0 +1,135 @@ +From 63079fbe20c954140f8eb61f858b0774890f301c Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 17 Sep 2018 09:22:21 +0100 +Subject: [PATCH] staging/vc04_services: Use correct cache line size + +Use the compatible string in the DTB to select the correct cache line +size for the SoC - 32 for BCM2835, and 64 for BCM2836 and BCM2837. + +Signed-off-by: Phil Elwell +Tested-by: Stefan Wahren +Signed-off-by: Greg Kroah-Hartman +--- + .../interface/vchiq_arm/vchiq_2835_arm.c | 15 ++------ + .../interface/vchiq_arm/vchiq_arm.c | 35 +++++++++++++------ + .../interface/vchiq_arm/vchiq_arm.h | 5 +++ + 3 files changed, 33 insertions(+), 22 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +@@ -117,7 +117,8 @@ free_pagelist(struct vchiq_pagelist_info + int vchiq_platform_init(struct platform_device *pdev, VCHIQ_STATE_T *state) + { + struct device *dev = &pdev->dev; +- struct rpi_firmware *fw = platform_get_drvdata(pdev); ++ struct vchiq_drvdata *drvdata = platform_get_drvdata(pdev); ++ struct rpi_firmware *fw = drvdata->fw; + VCHIQ_SLOT_ZERO_T *vchiq_slot_zero; + struct resource *res; + void *slot_mem; +@@ -135,17 +136,7 @@ int vchiq_platform_init(struct platform_ + if (err < 0) + return err; + +- /* +- * The tempting L1_CACHE_BYTES macro doesn't work in the case of +- * a kernel built with bcm2835_defconfig running on a BCM2836/7 +- * processor, hence the need for a runtime check. The dcache line size +- * is encoded in one of the coprocessor registers, but there is no +- * convenient way to access it short of embedded assembler, hence +- * the use of read_cpuid_id(). The following test evaluates to true +- * on a BCM2835 showing that it is ARMv6-ish, whereas +- * cpu_architecture() will indicate that it is an ARMv7. +- */ +- g_cache_line_size = ((read_cpuid_id() & 0x7f000) == 0x7b000) ? 32 : 64; ++ g_cache_line_size = drvdata->cache_line_size; + g_fragments_size = 2 * g_cache_line_size; + + /* Allocate space for the channels in coherent memory */ +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -173,6 +173,14 @@ static struct platform_device *bcm2835_c + static struct platform_device *bcm2835_codec; + static struct platform_device *vcsm_cma; + ++static struct vchiq_drvdata bcm2835_drvdata = { ++ .cache_line_size = 32, ++}; ++ ++static struct vchiq_drvdata bcm2836_drvdata = { ++ .cache_line_size = 64, ++}; ++ + static const char *const ioctl_names[] = { + "CONNECT", + "SHUTDOWN", +@@ -3607,12 +3615,25 @@ vchiq_register_child(struct platform_dev + return new_dev; + } + ++static const struct of_device_id vchiq_of_match[] = { ++ { .compatible = "brcm,bcm2835-vchiq", .data = &bcm2835_drvdata }, ++ { .compatible = "brcm,bcm2836-vchiq", .data = &bcm2836_drvdata }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, vchiq_of_match); ++ + static int vchiq_probe(struct platform_device *pdev) + { + struct device_node *fw_node; +- struct rpi_firmware *fw; ++ const struct of_device_id *of_id; ++ struct vchiq_drvdata *drvdata; + int err; + ++ of_id = of_match_node(vchiq_of_match, pdev->dev.of_node); ++ drvdata = (struct vchiq_drvdata *)of_id->data; ++ if (!drvdata) ++ return -EINVAL; ++ + fw_node = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (!fw_node) { +@@ -3620,12 +3641,12 @@ static int vchiq_probe(struct platform_d + return -ENOENT; + } + +- fw = rpi_firmware_get(fw_node); ++ drvdata->fw = rpi_firmware_get(fw_node); + of_node_put(fw_node); +- if (!fw) ++ if (!drvdata->fw) + return -EPROBE_DEFER; + +- platform_set_drvdata(pdev, fw); ++ platform_set_drvdata(pdev, drvdata); + + err = vchiq_platform_init(pdev, &g_state); + if (err != 0) +@@ -3703,12 +3724,6 @@ static int vchiq_remove(struct platform_ + return 0; + } + +-static const struct of_device_id vchiq_of_match[] = { +- { .compatible = "brcm,bcm2835-vchiq", }, +- {}, +-}; +-MODULE_DEVICE_TABLE(of, vchiq_of_match); +- + static struct platform_driver vchiq_driver = { + .driver = { + .name = "bcm2835_vchiq", +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h +@@ -123,6 +123,11 @@ typedef struct vchiq_arm_state_struct { + + } VCHIQ_ARM_STATE_T; + ++struct vchiq_drvdata { ++ const unsigned int cache_line_size; ++ struct rpi_firmware *fw; ++}; ++ + extern int vchiq_arm_log_level; + extern int vchiq_susp_log_level; + diff --git a/target/linux/brcm2708/patches-4.19/950-0472-staging-bcm2835-audio-use-module_platform_driver-mac.patch b/target/linux/brcm2708/patches-4.19/950-0472-staging-bcm2835-audio-use-module_platform_driver-mac.patch deleted file mode 100644 index da783a5d77..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0472-staging-bcm2835-audio-use-module_platform_driver-mac.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 72c059360457babd76009697e652c96cb282856e Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Thu, 6 Dec 2018 19:28:57 +0100 -Subject: [PATCH 472/806] staging: bcm2835-audio: use module_platform_driver() - macro - -commit 1e55d56344b0777d6cee9b9e4a813d53728ee798 upstream. - -There is not much value behind this boilerplate, so use -module_platform_driver() instead. - -Signed-off-by: Stefan Wahren -Reviewed-by: Nicolas Saenz Julienne -Reviewed-by: Dan Carpenter -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835.c | 20 +------------------ - 1 file changed, 1 insertion(+), 19 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -354,25 +354,7 @@ static struct platform_driver bcm2835_al - .of_match_table = snd_bcm2835_of_match_table, - }, - }; -- --static int bcm2835_alsa_device_init(void) --{ -- int retval; -- -- retval = platform_driver_register(&bcm2835_alsa_driver); -- if (retval) -- pr_err("Error registering bcm2835_audio driver %d .\n", retval); -- -- return retval; --} -- --static void bcm2835_alsa_device_exit(void) --{ -- platform_driver_unregister(&bcm2835_alsa_driver); --} -- --late_initcall(bcm2835_alsa_device_init); --module_exit(bcm2835_alsa_device_exit); -+module_platform_driver(bcm2835_alsa_driver); - - MODULE_AUTHOR("Dom Cobley"); - MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); diff --git a/target/linux/brcm2708/patches-4.19/950-0472-tty-amba-pl011-allow-shared-interrupt.patch b/target/linux/brcm2708/patches-4.19/950-0472-tty-amba-pl011-allow-shared-interrupt.patch new file mode 100644 index 0000000000..5d316bd314 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0472-tty-amba-pl011-allow-shared-interrupt.patch @@ -0,0 +1,28 @@ +From ea75a716955e85ad076dd2861ca9e41def406a1b Mon Sep 17 00:00:00 2001 +From: Doug Berger +Date: Mon, 13 May 2019 20:59:45 +0200 +Subject: [PATCH] tty: amba-pl011: allow shared interrupt + +The PL011 register space includes all necessary status bits to +determine whether a device instance requires handling in response +to an interrupt. Therefore, multiple instances of the device could +be serviced by a single shared interrupt, which is the case on BCM7211. + +Signed-off-by: Doug Berger +Signed-off-by: Florian Fainelli +--- + drivers/tty/serial/amba-pl011.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/tty/serial/amba-pl011.c ++++ b/drivers/tty/serial/amba-pl011.c +@@ -1733,7 +1733,8 @@ static int pl011_allocate_irq(struct uar + { + pl011_write(uap->im, uap, REG_IMSC); + +- return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); ++ return request_irq(uap->port.irq, pl011_int, IRQF_SHARED, "uart-pl011", ++ uap); + } + + /* diff --git a/target/linux/brcm2708/patches-4.19/950-0473-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch b/target/linux/brcm2708/patches-4.19/950-0473-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch new file mode 100644 index 0000000000..53fc19c0f2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0473-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch @@ -0,0 +1,44 @@ +From 3f6fe9da303fc01fb754a0a639ec3cdb813e8780 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sun, 19 May 2019 12:20:00 +0200 +Subject: [PATCH] ARM: bcm283x: Reduce register ranges for UART, SPI + and I2C + +The assigned register ranges for UART, SPI and I2C were too wasteful. +In order to avoid overlapping with the new functions on BCM2838 +reduce the ranges. + +Signed-off-by: Stefan Wahren +--- + arch/arm/boot/dts/bcm283x.dtsi | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -387,7 +387,7 @@ + + uart0: serial@7e201000 { + compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; +- reg = <0x7e201000 0x1000>; ++ reg = <0x7e201000 0x200>; + interrupts = <2 25>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; +@@ -418,7 +418,7 @@ + + spi: spi@7e204000 { + compatible = "brcm,bcm2835-spi"; +- reg = <0x7e204000 0x1000>; ++ reg = <0x7e204000 0x200>; + interrupts = <2 22>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; +@@ -428,7 +428,7 @@ + + i2c0: i2c@7e205000 { + compatible = "brcm,bcm2835-i2c"; +- reg = <0x7e205000 0x1000>; ++ reg = <0x7e205000 0x200>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; diff --git a/target/linux/brcm2708/patches-4.19/950-0473-staging-bcm2835-audio-Drop-DT-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0473-staging-bcm2835-audio-Drop-DT-dependency.patch deleted file mode 100644 index b2668283e1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0473-staging-bcm2835-audio-Drop-DT-dependency.patch +++ /dev/null @@ -1,105 +0,0 @@ -From 1ddeeda8208bc269c90aad4bd8bb878f7436f62d Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Thu, 6 Dec 2018 19:28:58 +0100 -Subject: [PATCH 473/806] staging: bcm2835-audio: Drop DT dependency - -commit 438fc48260a0afc4cee733e5bc20234ff2bbef56 upstream. - -Just like the bcm2835-video make this a platform driver which is probed -by vchiq. In order to change the number of channels use a module -parameter instead, but use the maximum as default. - -Signed-off-by: Stefan Wahren -Reviewed-by: Nicolas Saenz Julienne -Reviewed-by: Dan Carpenter -Signed-off-by: Greg Kroah-Hartman ---- - .../vc04_services/bcm2835-audio/bcm2835.c | 31 ++++++------------- - 1 file changed, 9 insertions(+), 22 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -6,13 +6,13 @@ - #include - #include - #include --#include - - #include "bcm2835.h" - - static bool enable_hdmi; - static bool enable_headphones; - static bool enable_compat_alsa = true; -+static int num_channels = MAX_SUBSTREAMS; - - module_param(enable_hdmi, bool, 0444); - MODULE_PARM_DESC(enable_hdmi, "Enables HDMI virtual audio device"); -@@ -21,6 +21,8 @@ MODULE_PARM_DESC(enable_headphones, "Ena - module_param(enable_compat_alsa, bool, 0444); - MODULE_PARM_DESC(enable_compat_alsa, - "Enables ALSA compatibility virtual audio device"); -+module_param(num_channels, int, 0644); -+MODULE_PARM_DESC(num_channels, "Number of audio channels (default: 8)"); - - static void bcm2835_devm_free_vchi_ctx(struct device *dev, void *res) - { -@@ -294,28 +296,19 @@ static int snd_add_child_devices(struct - static int snd_bcm2835_alsa_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -- u32 numchans; - int err; - -- err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", -- &numchans); -- if (err) { -- dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); -- return err; -- } -- -- if (numchans == 0 || numchans > MAX_SUBSTREAMS) { -- numchans = MAX_SUBSTREAMS; -- dev_warn(dev, -- "Illegal 'brcm,pwm-channels' value, will use %u\n", -- numchans); -+ if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) { -+ num_channels = MAX_SUBSTREAMS; -+ dev_warn(dev, "Illegal num_channels value, will use %u\n", -+ num_channels); - } - - err = bcm2835_devm_add_vchi_ctx(dev); - if (err) - return err; - -- err = snd_add_child_devices(dev, numchans); -+ err = snd_add_child_devices(dev, num_channels); - if (err) - return err; - -@@ -337,12 +330,6 @@ static int snd_bcm2835_alsa_resume(struc - - #endif - --static const struct of_device_id snd_bcm2835_of_match_table[] = { -- { .compatible = "brcm,bcm2835-audio",}, -- {}, --}; --MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); -- - static struct platform_driver bcm2835_alsa_driver = { - .probe = snd_bcm2835_alsa_probe, - #ifdef CONFIG_PM -@@ -351,7 +338,6 @@ static struct platform_driver bcm2835_al - #endif - .driver = { - .name = "bcm2835_audio", -- .of_match_table = snd_bcm2835_of_match_table, - }, - }; - module_platform_driver(bcm2835_alsa_driver); -@@ -359,3 +345,4 @@ module_platform_driver(bcm2835_alsa_driv - MODULE_AUTHOR("Dom Cobley"); - MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); - MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:bcm2835_audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0474-ARM-bcm283x-Extend-the-WDT-DT-node-out-to-cover-the-.patch b/target/linux/brcm2708/patches-4.19/950-0474-ARM-bcm283x-Extend-the-WDT-DT-node-out-to-cover-the-.patch new file mode 100644 index 0000000000..84a691343f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0474-ARM-bcm283x-Extend-the-WDT-DT-node-out-to-cover-the-.patch @@ -0,0 +1,45 @@ +From 9f889edf282d1d9a21c921e6cd33cebe22bcc4d4 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 12 Dec 2018 15:51:49 -0800 +Subject: [PATCH] ARM: bcm283x: Extend the WDT DT node out to cover the + whole PM block. (v4) + +It was covering part of the PM block's range, up to the WDT regs. To +support the rest of the PM block's functionality, we need the full +register range plus the AXI Async Bridge regs for PM sequencing. + +This doesn't convert any of the consumers over to the new binding yet, +since we will need to be careful in coordinating our usage of firmware +services that might power domains on and off versus the bcm2835-pm +driver's access of those same domains. + +Signed-off-by: Eric Anholt +Acked-by: Stefan Wahren +Signed-off-by: Stefan Wahren +(cherry picked from commit 29abc92c1d93e28a8f4d55e6343eec4faf44025a) +--- + arch/arm/boot/dts/bcm283x.dtsi | 13 +++++++++++-- + 1 file changed, 11 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -121,8 +121,17 @@ + }; + + watchdog@7e100000 { +- compatible = "brcm,bcm2835-pm-wdt"; +- reg = <0x7e100000 0x28>; ++ compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; ++ #power-domain-cells = <1>; ++ #reset-cells = <1>; ++ reg = <0x7e100000 0x114>, ++ <0x7e00a000 0x24>; ++ clocks = <&clocks BCM2835_CLOCK_V3D>, ++ <&clocks BCM2835_CLOCK_PERI_IMAGE>, ++ <&clocks BCM2835_CLOCK_H264>, ++ <&clocks BCM2835_CLOCK_ISP>; ++ clock-names = "v3d", "peri_image", "h264", "isp"; ++ system-power-controller; + }; + + clocks: cprman@7e101000 { diff --git a/target/linux/brcm2708/patches-4.19/950-0474-staging-bcm2835-audio-double-free-in-init-error-path.patch b/target/linux/brcm2708/patches-4.19/950-0474-staging-bcm2835-audio-double-free-in-init-error-path.patch deleted file mode 100644 index 8c350f74de..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0474-staging-bcm2835-audio-double-free-in-init-error-path.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 360a1982333c8e8f583663155479115d6eb7cd14 Mon Sep 17 00:00:00 2001 -From: Dan Carpenter -Date: Mon, 17 Dec 2018 10:08:54 +0300 -Subject: [PATCH 474/806] staging: bcm2835-audio: double free in init error - path - -commit 136ff5e49271c4c8fceeca5491c48e66b961564b upstream. - -We free instance here and in the caller. It should be only the caller -which handles it. - -Fixes: d7ca3a71545b ("staging: bcm2835-audio: Operate non-atomic PCM ops") -Signed-off-by: Dan Carpenter -Reviewed-by: Takashi Iwai -Cc: stable -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c -@@ -145,7 +145,6 @@ vc_vchi_audio_init(VCHI_INSTANCE_T vchi_ - dev_err(instance->dev, - "failed to open VCHI service connection (status=%d)\n", - status); -- kfree(instance); - return -EPERM; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0475-ARM-dts-Add-label-to-bcm2835-RNG.patch b/target/linux/brcm2708/patches-4.19/950-0475-ARM-dts-Add-label-to-bcm2835-RNG.patch new file mode 100644 index 0000000000..3d35540bda --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0475-ARM-dts-Add-label-to-bcm2835-RNG.patch @@ -0,0 +1,20 @@ +From 1297aac31942e596e6888d772ba49393a9f59417 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 4 May 2019 17:06:54 +0200 +Subject: [PATCH] ARM: dts: Add label to bcm2835 RNG + +--- + arch/arm/boot/dts/bcm283x.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -148,7 +148,7 @@ + <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; + }; + +- rng@7e104000 { ++ rng: rng@7e104000 { + compatible = "brcm,bcm2835-rng"; + reg = <0x7e104000 0x10>; + interrupts = <2 29>; diff --git a/target/linux/brcm2708/patches-4.19/950-0475-dts-Increase-default-coherent-pool-size.patch b/target/linux/brcm2708/patches-4.19/950-0475-dts-Increase-default-coherent-pool-size.patch deleted file mode 100644 index a8bd364465..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0475-dts-Increase-default-coherent-pool-size.patch +++ /dev/null @@ -1,27 +0,0 @@ -From e13c663bfc75a628ba25afdf3f3b4a40a2c0250e Mon Sep 17 00:00:00 2001 -From: P33M -Date: Wed, 1 May 2019 15:00:05 +0100 -Subject: [PATCH 475/806] dts: Increase default coherent pool size - -dwc_otg allocates DMA-coherent buffers in atomic context for misaligned -transfer buffers. The pool that these allocations come from is set up -at boot-time but can be overridden by a commandline parameter - -increase this for now to prevent failures seen on 4.19 with multiple -USB Ethernet devices. - -see: https://github.com/raspberrypi/linux/issues/2924 ---- - arch/arm/boot/dts/bcm270x.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -3,7 +3,7 @@ - - / { - chosen { -- bootargs = ""; -+ bootargs = "coherent_pool=1M"; - /delete-property/ stdout-path; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0476-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch b/target/linux/brcm2708/patches-4.19/950-0476-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch deleted file mode 100644 index 5cb6d061cf..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0476-Revert-staging-bcm2835-audio-Drop-DT-dependency.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 369f591ee78af2d53c67f561daeb963cc4aa60aa Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 1 May 2019 14:23:39 +0100 -Subject: [PATCH 476/806] Revert "staging: bcm2835-audio: Drop DT dependency" - -This reverts commit 60a2e557a4f81480216066f22b84c3dda31b3470. ---- - .../vc04_services/bcm2835-audio/bcm2835.c | 31 +++++++++++++------ - 1 file changed, 22 insertions(+), 9 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -6,13 +6,13 @@ - #include - #include - #include -+#include - - #include "bcm2835.h" - - static bool enable_hdmi; - static bool enable_headphones; - static bool enable_compat_alsa = true; --static int num_channels = MAX_SUBSTREAMS; - - module_param(enable_hdmi, bool, 0444); - MODULE_PARM_DESC(enable_hdmi, "Enables HDMI virtual audio device"); -@@ -21,8 +21,6 @@ MODULE_PARM_DESC(enable_headphones, "Ena - module_param(enable_compat_alsa, bool, 0444); - MODULE_PARM_DESC(enable_compat_alsa, - "Enables ALSA compatibility virtual audio device"); --module_param(num_channels, int, 0644); --MODULE_PARM_DESC(num_channels, "Number of audio channels (default: 8)"); - - static void bcm2835_devm_free_vchi_ctx(struct device *dev, void *res) - { -@@ -296,19 +294,28 @@ static int snd_add_child_devices(struct - static int snd_bcm2835_alsa_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -+ u32 numchans; - int err; - -- if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) { -- num_channels = MAX_SUBSTREAMS; -- dev_warn(dev, "Illegal num_channels value, will use %u\n", -- num_channels); -+ err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", -+ &numchans); -+ if (err) { -+ dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); -+ return err; -+ } -+ -+ if (numchans == 0 || numchans > MAX_SUBSTREAMS) { -+ numchans = MAX_SUBSTREAMS; -+ dev_warn(dev, -+ "Illegal 'brcm,pwm-channels' value, will use %u\n", -+ numchans); - } - - err = bcm2835_devm_add_vchi_ctx(dev); - if (err) - return err; - -- err = snd_add_child_devices(dev, num_channels); -+ err = snd_add_child_devices(dev, numchans); - if (err) - return err; - -@@ -330,6 +337,12 @@ static int snd_bcm2835_alsa_resume(struc - - #endif - -+static const struct of_device_id snd_bcm2835_of_match_table[] = { -+ { .compatible = "brcm,bcm2835-audio",}, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); -+ - static struct platform_driver bcm2835_alsa_driver = { - .probe = snd_bcm2835_alsa_probe, - #ifdef CONFIG_PM -@@ -338,6 +351,7 @@ static struct platform_driver bcm2835_al - #endif - .driver = { - .name = "bcm2835_audio", -+ .of_match_table = snd_bcm2835_of_match_table, - }, - }; - module_platform_driver(bcm2835_alsa_driver); -@@ -345,4 +359,3 @@ module_platform_driver(bcm2835_alsa_driv - MODULE_AUTHOR("Dom Cobley"); - MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); - MODULE_LICENSE("GPL"); --MODULE_ALIAS("platform:bcm2835_audio"); diff --git a/target/linux/brcm2708/patches-4.19/950-0476-dts-Use-fb-rather-than-leds-for-dpi-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0476-dts-Use-fb-rather-than-leds-for-dpi-overlay.patch new file mode 100644 index 0000000000..9c7d073b5a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0476-dts-Use-fb-rather-than-leds-for-dpi-overlay.patch @@ -0,0 +1,32 @@ +From 4a09c51bc328b2b83ffa20a6db02ac18139a963d Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Thu, 12 Oct 2017 18:11:32 +0100 +Subject: [PATCH] dts: Use fb rather than leds for dpi overlay + +--- + arch/arm/boot/dts/overlays/dpi18-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/dpi24-overlay.dts | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/dpi18-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts +@@ -9,7 +9,7 @@ + // reference on - leds will do + + fragment@0 { +- target = <&leds>; ++ target = <&fb>; + __overlay__ { + pinctrl-names = "default"; + pinctrl-0 = <&dpi18_pins>; +--- a/arch/arm/boot/dts/overlays/dpi24-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts +@@ -9,7 +9,7 @@ + // reference on - leds will do + + fragment@0 { +- target = <&leds>; ++ target = <&fb>; + __overlay__ { + pinctrl-names = "default"; + pinctrl-0 = <&dpi24_pins>; diff --git a/target/linux/brcm2708/patches-4.19/950-0477-BCM270X_DT-Minor-tidy-up.patch b/target/linux/brcm2708/patches-4.19/950-0477-BCM270X_DT-Minor-tidy-up.patch new file mode 100644 index 0000000000..70325f7768 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0477-BCM270X_DT-Minor-tidy-up.patch @@ -0,0 +1,95 @@ +From 021d54e3ae67e2b02310b9e3e871876a2c3b7eee Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 29 May 2019 15:19:21 +0100 +Subject: [PATCH] BCM270X_DT: Minor tidy up + +Move arm_pmu out of soc on bcm2710, and labels aren't aliases. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm270x.dtsi | 14 +++++++------- + arch/arm/boot/dts/bcm2710.dtsi | 13 +++++-------- + 2 files changed, 12 insertions(+), 15 deletions(-) + +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -10,11 +10,11 @@ + soc: soc { + + watchdog: watchdog@7e100000 { +- /* Add alias */ ++ /* Add label */ + }; + + random: rng@7e104000 { +- /* Add alias */ ++ /* Add label */ + }; + + gpio@7e200000 { /* gpio */ +@@ -40,18 +40,18 @@ + }; + + spi0: spi@7e204000 { +- /* Add alias */ ++ /* Add label */ + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; + }; + + pixelvalve0: pixelvalve@7e206000 { +- /* Add alias */ ++ /* Add label */ + status = "disabled"; + }; + + pixelvalve1: pixelvalve@7e207000 { +- /* Add alias */ ++ /* Add label */ + status = "disabled"; + }; + +@@ -93,7 +93,7 @@ + }; + + hvs: hvs@7e400000 { +- /* Add alias */ ++ /* Add label */ + status = "disabled"; + }; + +@@ -119,7 +119,7 @@ + }; + + pixelvalve2: pixelvalve@7e807000 { +- /* Add alias */ ++ /* Add label */ + status = "disabled"; + }; + +--- a/arch/arm/boot/dts/bcm2710.dtsi ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -5,18 +5,15 @@ + / { + compatible = "brcm,bcm2837", "brcm,bcm2836"; + +- soc { +- +- arm-pmu { ++ arm-pmu { + #ifdef RPI364 +- compatible = "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; ++ compatible = "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; + #else +- compatible = "arm,cortex-a7-pmu"; ++ compatible = "arm,cortex-a7-pmu"; + #endif +- interrupt-parent = <&local_intc>; +- interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; +- }; ++ }; + ++ soc { + /delete-node/ timer@7e003000; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0478-arm-bcm2835-Fix-FIQ-early-ioremap.patch b/target/linux/brcm2708/patches-4.19/950-0478-arm-bcm2835-Fix-FIQ-early-ioremap.patch new file mode 100644 index 0000000000..d320e40c41 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0478-arm-bcm2835-Fix-FIQ-early-ioremap.patch @@ -0,0 +1,73 @@ +From 51d6e1924fd0e9d075bcef61bea5a475a0ad6634 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 20 Feb 2019 08:49:39 +0000 +Subject: [PATCH] arm: bcm2835: Fix FIQ early ioremap + +The ioremapping creates mappings within the vmalloc area. The +equivalent early function, create_mapping, now checks that the +requested explicit virtual address is between VMALLOC_START and +VMALLOC_END. As there is no reason to have any correlation between +the physical and virtual addresses, put the required mappings at +VMALLOC_START and above. + +Signed-off-by: Phil Elwell +--- + arch/arm/mach-bcm/board_bcm2835.c | 21 +++++++++++++++------ + 1 file changed, 15 insertions(+), 6 deletions(-) + +--- a/arch/arm/mach-bcm/board_bcm2835.c ++++ b/arch/arm/mach-bcm/board_bcm2835.c +@@ -14,17 +14,20 @@ + + #include + #include ++#include + #include + #include + #include + + #include + #include ++#include ++#include + + #include "platsmp.h" + +-#define BCM2835_USB_VIRT_BASE 0xf0980000 +-#define BCM2835_USB_VIRT_MPHI 0xf0006000 ++#define BCM2835_USB_VIRT_BASE (VMALLOC_START) ++#define BCM2835_USB_VIRT_MPHI (VMALLOC_START + 0x10000) + + static void __init bcm2835_init(void) + { +@@ -83,20 +86,26 @@ static int __init bcm2835_map_usb(unsign + + static void __init bcm2835_map_io(void) + { +- const __be32 *ranges; ++ const __be32 *ranges, *address_cells; ++ unsigned long root, addr_cells; + int soc, len; + unsigned long p2b_offset; + + debug_ll_io_init(); + ++ root = of_get_flat_dt_root(); + /* Find out how to map bus to physical address first from soc/ranges */ +- soc = of_get_flat_dt_subnode_by_name(of_get_flat_dt_root(), "soc"); ++ soc = of_get_flat_dt_subnode_by_name(root, "soc"); + if (soc < 0) + return; ++ address_cells = of_get_flat_dt_prop(root, "#address-cells", &len); ++ if (!address_cells || len < (sizeof(unsigned long))) ++ return; ++ addr_cells = be32_to_cpu(address_cells[0]); + ranges = of_get_flat_dt_prop(soc, "ranges", &len); +- if (!ranges || len < (sizeof(unsigned long) * 3)) ++ if (!ranges || len < (sizeof(unsigned long) * (2 + addr_cells))) + return; +- p2b_offset = be32_to_cpu(ranges[0]) - be32_to_cpu(ranges[1]); ++ p2b_offset = be32_to_cpu(ranges[0]) - be32_to_cpu(ranges[addr_cells]); + + /* Now search for bcm2708-usb node in device tree */ + of_scan_flat_dt(bcm2835_map_usb, &p2b_offset); diff --git a/target/linux/brcm2708/patches-4.19/950-0478-smsc95xx-dynamically-fix-up-TX-buffer-alignment-with.patch b/target/linux/brcm2708/patches-4.19/950-0478-smsc95xx-dynamically-fix-up-TX-buffer-alignment-with.patch deleted file mode 100644 index 149e2c035f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0478-smsc95xx-dynamically-fix-up-TX-buffer-alignment-with.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 26c79197da4b2911e10c600d79839a82a43a06ff Mon Sep 17 00:00:00 2001 -From: P33M -Date: Wed, 1 May 2019 17:04:32 +0100 -Subject: [PATCH 478/806] smsc95xx: dynamically fix up TX buffer alignment with - padding bytes - -dwc_otg requires a 32-bit aligned buffer start address, otherwise -expensive bounce buffers are used. The LAN951x hardware can skip up to -3 bytes between the TX header and the start of frame data, which can -be used to force alignment of the URB passed to dwc_otg. - -As found in https://github.com/raspberrypi/linux/issues/2924 ---- - drivers/net/usb/smsc95xx.c | 12 +++++++----- - drivers/net/usb/smsc95xx.h | 2 +- - 2 files changed, 8 insertions(+), 6 deletions(-) - ---- a/drivers/net/usb/smsc95xx.c -+++ b/drivers/net/usb/smsc95xx.c -@@ -2082,7 +2082,9 @@ static struct sk_buff *smsc95xx_tx_fixup - struct sk_buff *skb, gfp_t flags) - { - bool csum = skb->ip_summed == CHECKSUM_PARTIAL; -- int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD; -+ unsigned int align_bytes = -((uintptr_t)skb->data) & 0x3; -+ int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM + align_bytes -+ : SMSC95XX_TX_OVERHEAD + align_bytes; - u32 tx_cmd_a, tx_cmd_b; - - /* We do not advertise SG, so skbs should be already linearized */ -@@ -2116,16 +2118,16 @@ static struct sk_buff *smsc95xx_tx_fixup - } - } - -- skb_push(skb, 4); -- tx_cmd_b = (u32)(skb->len - 4); -+ skb_push(skb, 4 + align_bytes); -+ tx_cmd_b = (u32)(skb->len - 4 - align_bytes); - if (csum) - tx_cmd_b |= TX_CMD_B_CSUM_ENABLE; - cpu_to_le32s(&tx_cmd_b); - memcpy(skb->data, &tx_cmd_b, 4); - - skb_push(skb, 4); -- tx_cmd_a = (u32)(skb->len - 8) | TX_CMD_A_FIRST_SEG_ | -- TX_CMD_A_LAST_SEG_; -+ tx_cmd_a = (u32)(skb->len - 8 - align_bytes) | TX_CMD_A_FIRST_SEG_ | -+ (align_bytes << 16) | TX_CMD_A_LAST_SEG_; - cpu_to_le32s(&tx_cmd_a); - memcpy(skb->data, &tx_cmd_a, 4); - ---- a/drivers/net/usb/smsc95xx.h -+++ b/drivers/net/usb/smsc95xx.h -@@ -21,7 +21,7 @@ - #define _SMSC95XX_H - - /* Tx command words */ --#define TX_CMD_A_DATA_OFFSET_ (0x001F0000) /* Data Start Offset */ -+#define TX_CMD_A_DATA_OFFSET_ (0x00030000) /* Data Start Offset */ - #define TX_CMD_A_FIRST_SEG_ (0x00002000) /* First Segment */ - #define TX_CMD_A_LAST_SEG_ (0x00001000) /* Last Segment */ - #define TX_CMD_A_BUF_SIZE_ (0x000007FF) /* Buffer Size */ diff --git a/target/linux/brcm2708/patches-4.19/950-0479-Fix-copy_from_user-if-BCM2835_FAST_MEMCPY-n.patch b/target/linux/brcm2708/patches-4.19/950-0479-Fix-copy_from_user-if-BCM2835_FAST_MEMCPY-n.patch new file mode 100644 index 0000000000..b06b21404e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0479-Fix-copy_from_user-if-BCM2835_FAST_MEMCPY-n.patch @@ -0,0 +1,39 @@ +From ab2695d38f4ffadde05c2275ac68f4aad68ef336 Mon Sep 17 00:00:00 2001 +From: Tim Gover +Date: Thu, 14 Mar 2019 10:16:02 +0000 +Subject: [PATCH] Fix copy_from_user if BCM2835_FAST_MEMCPY=n + +The change which introduced CONFIG_BCM2835_FAST_MEMCPY unconditionally +changed the behaviour of arm_copy_from_user. The page pinning code +is not safe on ARMv7 if LPAE & high memory is enabled and causes +crashes which look like PTE corruption. + +Make __copy_from_user_memcpy conditional on CONFIG_2835_FAST_MEMCPY=y +which is really an ARMv6 / Pi1 optimization and not necessary on newer +ARM processors. +--- + arch/arm/lib/uaccess_with_memcpy.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/arch/arm/lib/uaccess_with_memcpy.c ++++ b/arch/arm/lib/uaccess_with_memcpy.c +@@ -257,6 +257,7 @@ arm_copy_to_user(void __user *to, const + unsigned long __must_check + arm_copy_from_user(void *to, const void __user *from, unsigned long n) + { ++#ifdef CONFIG_BCM2835_FAST_MEMCPY + /* + * This test is stubbed out of the main function above to keep + * the overhead for small copies low by avoiding a large +@@ -271,6 +272,11 @@ arm_copy_from_user(void *to, const void + } else { + n = __copy_from_user_memcpy(to, from, n); + } ++#else ++ unsigned long ua_flags = uaccess_save_and_enable(); ++ n = __copy_from_user_std(to, from, n); ++ uaccess_restore(ua_flags); ++#endif + return n; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0479-lan78xx-use-default-alignment-for-rx-buffers.patch b/target/linux/brcm2708/patches-4.19/950-0479-lan78xx-use-default-alignment-for-rx-buffers.patch deleted file mode 100644 index d8cf36f1ea..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0479-lan78xx-use-default-alignment-for-rx-buffers.patch +++ /dev/null @@ -1,23 +0,0 @@ -From fdbe849f960ee92befd781cff14d9b76142b0981 Mon Sep 17 00:00:00 2001 -From: P33M -Date: Thu, 2 May 2019 11:53:45 +0100 -Subject: [PATCH 479/806] lan78xx: use default alignment for rx buffers - -The lan78xx uses a 12-byte hardware rx header, so there is no need -to allocate SKBs with NET_IP_ALIGN set. Removes alignment faults -in both dwc_otg and in ipv6 processing. ---- - drivers/net/usb/lan78xx.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/usb/lan78xx.c -+++ b/drivers/net/usb/lan78xx.c -@@ -3258,7 +3258,7 @@ static int rx_submit(struct lan78xx_net - size_t size = dev->rx_urb_size; - int ret = 0; - -- skb = netdev_alloc_skb_ip_align(dev->net, size); -+ skb = netdev_alloc_skb(dev->net, size); - if (!skb) { - usb_free_urb(urb); - return -ENOMEM; diff --git a/target/linux/brcm2708/patches-4.19/950-0480-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch b/target/linux/brcm2708/patches-4.19/950-0480-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch new file mode 100644 index 0000000000..88431e2aca --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0480-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch @@ -0,0 +1,1187 @@ +From ac1212c0f8b611be6df28f252ebbad80b775ee0f Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 19 Feb 2019 22:06:59 +0000 +Subject: [PATCH] PCI: brcmstb: Add Broadcom STB PCIe host controller + driver + +This commit adds the basic Broadcom STB PCIe controller. Missing is +the ability to process MSI and also handle dma-ranges for inbound +memory accesses. These two functionalities are added in subsequent +commits. + +The PCIe block contains an MDIO interface. This is a local interface +only accessible by the PCIe controller. It cannot be used or shared +by any other HW. As such, the small amount of code for this +controller is included in this driver as there is little upside to put +it elsewhere. + +Signed-off-by: Jim Quinlan +--- + drivers/pci/controller/Kconfig | 9 + + drivers/pci/controller/Makefile | 2 +- + drivers/pci/controller/pcie-brcmstb.c | 1097 +++++++++++++++++++++++++ + include/soc/brcmstb/memory_api.h | 25 + + 4 files changed, 1132 insertions(+), 1 deletion(-) + create mode 100644 drivers/pci/controller/pcie-brcmstb.c + create mode 100644 include/soc/brcmstb/memory_api.h + +--- a/drivers/pci/controller/Kconfig ++++ b/drivers/pci/controller/Kconfig +@@ -278,5 +278,14 @@ config VMD + To compile this driver as a module, choose M here: the + module will be called vmd. + ++config PCIE_BRCMSTB ++ tristate "Broadcom Brcmstb PCIe platform host driver" ++ depends on ARCH_BRCMSTB || BMIPS_GENERIC ++ depends on OF ++ depends on SOC_BRCMSTB ++ default ARCH_BRCMSTB || BMIPS_GENERIC ++ help ++ Adds support for Broadcom Settop Box PCIe host controller. ++ + source "drivers/pci/controller/dwc/Kconfig" + endmenu +--- a/drivers/pci/controller/Makefile ++++ b/drivers/pci/controller/Makefile +@@ -28,11 +28,11 @@ obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie + obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o + obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o + obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o ++obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o + obj-$(CONFIG_VMD) += vmd.o + # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW + obj-y += dwc/ + +- + # The following drivers are for devices that use the generic ACPI + # pci_root.c driver but don't support standard ECAM config access. + # They contain MCFG quirks to replace the generic ECAM accessors with +--- /dev/null ++++ b/drivers/pci/controller/pcie-brcmstb.c +@@ -0,0 +1,1097 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* Copyright (C) 2009 - 2017 Broadcom */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "../pci.h" ++ ++/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ ++#define BRCM_PCIE_CAP_REGS 0x00ac ++ ++/* ++ * Broadcom Settop Box PCIe Register Offsets. The names are from ++ * the chip's RDB and we use them here so that a script can correlate ++ * this code and the RDB to prevent discrepancies. ++ */ ++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188 ++#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c ++#define PCIE_RC_DL_MDIO_ADDR 0x1100 ++#define PCIE_RC_DL_MDIO_WR_DATA 0x1104 ++#define PCIE_RC_DL_MDIO_RD_DATA 0x1108 ++#define PCIE_MISC_MISC_CTRL 0x4008 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010 ++#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c ++#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 ++#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 ++#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c ++#define PCIE_MISC_PCIE_CTRL 0x4064 ++#define PCIE_MISC_PCIE_STATUS 0x4068 ++#define PCIE_MISC_REVISION 0x406c ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 ++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 ++#define PCIE_INTR2_CPU_BASE 0x4300 ++ ++/* ++ * Broadcom Settop Box PCIe Register Field shift and mask info. The ++ * names are from the chip's RDB and we use them here so that a script ++ * can correlate this code and the RDB to prevent discrepancies. ++ */ ++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc ++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_SHIFT 0x2 ++#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff ++#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_SHIFT 0x0 ++#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000 ++#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_SHIFT 0xc ++#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000 ++#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_SHIFT 0xd ++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000 ++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_SHIFT 0x14 ++#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000 ++#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_SHIFT 0x1b ++#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK 0x7c00000 ++#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_SHIFT 0x16 ++#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK 0x1f ++#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_SHIFT 0x0 ++#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f ++#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_SHIFT 0x0 ++#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f ++#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_SHIFT 0x0 ++#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f ++#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_SHIFT 0x0 ++#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4 ++#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_SHIFT 0x2 ++#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1 ++#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_SHIFT 0x0 ++#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80 ++#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_SHIFT 0x7 ++#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20 ++#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_SHIFT 0x5 ++#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10 ++#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_SHIFT 0x4 ++#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40 ++#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_SHIFT 0x6 ++#define PCIE_MISC_REVISION_MAJMIN_MASK 0xffff ++#define PCIE_MISC_REVISION_MAJMIN_SHIFT 0 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_SHIFT 0x14 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_SHIFT 0x4 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS 0xc ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_SHIFT 0x0 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_SHIFT 0x0 ++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2 ++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_SHIFT 0x1 ++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000 ++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_SHIFT 0x1b ++#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1 ++#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0 ++ ++#define BRCM_NUM_PCIE_OUT_WINS 0x4 ++#define BRCM_MAX_SCB 0x4 ++ ++#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL ++#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL ++ ++#define BURST_SIZE_128 0 ++#define BURST_SIZE_256 1 ++#define BURST_SIZE_512 2 ++ ++/* Offsets from PCIE_INTR2_CPU_BASE */ ++#define STATUS 0x0 ++#define SET 0x4 ++#define CLR 0x8 ++#define MASK_STATUS 0xc ++#define MASK_SET 0x10 ++#define MASK_CLR 0x14 ++ ++#define PCIE_BUSNUM_SHIFT 20 ++#define PCIE_SLOT_SHIFT 15 ++#define PCIE_FUNC_SHIFT 12 ++ ++#if defined(__BIG_ENDIAN) ++#define DATA_ENDIAN 2 /* PCIe->DDR inbound traffic */ ++#define MMIO_ENDIAN 2 /* CPU->PCIe outbound traffic */ ++#else ++#define DATA_ENDIAN 0 ++#define MMIO_ENDIAN 0 ++#endif ++ ++#define MDIO_PORT0 0x0 ++#define MDIO_DATA_MASK 0x7fffffff ++#define MDIO_DATA_SHIFT 0x0 ++#define MDIO_PORT_MASK 0xf0000 ++#define MDIO_PORT_SHIFT 0x16 ++#define MDIO_REGAD_MASK 0xffff ++#define MDIO_REGAD_SHIFT 0x0 ++#define MDIO_CMD_MASK 0xfff00000 ++#define MDIO_CMD_SHIFT 0x14 ++#define MDIO_CMD_READ 0x1 ++#define MDIO_CMD_WRITE 0x0 ++#define MDIO_DATA_DONE_MASK 0x80000000 ++#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0) ++#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1) ++#define SSC_REGS_ADDR 0x1100 ++#define SET_ADDR_OFFSET 0x1f ++#define SSC_CNTL_OFFSET 0x2 ++#define SSC_CNTL_OVRD_EN_MASK 0x8000 ++#define SSC_CNTL_OVRD_EN_SHIFT 0xf ++#define SSC_CNTL_OVRD_VAL_MASK 0x4000 ++#define SSC_CNTL_OVRD_VAL_SHIFT 0xe ++#define SSC_STATUS_OFFSET 0x1 ++#define SSC_STATUS_SSC_MASK 0x400 ++#define SSC_STATUS_SSC_SHIFT 0xa ++#define SSC_STATUS_PLL_LOCK_MASK 0x800 ++#define SSC_STATUS_PLL_LOCK_SHIFT 0xb ++ ++#define IDX_ADDR(pcie) \ ++ ((pcie)->reg_offsets[EXT_CFG_INDEX]) ++#define DATA_ADDR(pcie) \ ++ ((pcie)->reg_offsets[EXT_CFG_DATA]) ++#define PCIE_RGR1_SW_INIT_1(pcie) \ ++ ((pcie)->reg_offsets[RGR1_SW_INIT_1]) ++ ++enum { ++ RGR1_SW_INIT_1, ++ EXT_CFG_INDEX, ++ EXT_CFG_DATA, ++}; ++ ++enum { ++ RGR1_SW_INIT_1_INIT_MASK, ++ RGR1_SW_INIT_1_INIT_SHIFT, ++ RGR1_SW_INIT_1_PERST_MASK, ++ RGR1_SW_INIT_1_PERST_SHIFT, ++}; ++ ++enum pcie_type { ++ BCM7425, ++ BCM7435, ++ GENERIC, ++ BCM7278, ++}; ++ ++struct brcm_window { ++ dma_addr_t pcie_addr; ++ phys_addr_t cpu_addr; ++ dma_addr_t size; ++}; ++ ++/* Internal PCIe Host Controller Information.*/ ++struct brcm_pcie { ++ struct device *dev; ++ void __iomem *base; ++ struct list_head resources; ++ int irq; ++ struct clk *clk; ++ struct pci_bus *root_bus; ++ struct device_node *dn; ++ int id; ++ bool suspended; ++ int num_out_wins; ++ bool ssc; ++ int gen; ++ struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS]; ++ unsigned int rev; ++ const int *reg_offsets; ++ const int *reg_field_info; ++ enum pcie_type type; ++}; ++ ++struct pcie_cfg_data { ++ const int *reg_field_info; ++ const int *offsets; ++ const enum pcie_type type; ++}; ++ ++static const int pcie_reg_field_info[] = { ++ [RGR1_SW_INIT_1_INIT_MASK] = 0x2, ++ [RGR1_SW_INIT_1_INIT_SHIFT] = 0x1, ++}; ++ ++static const int pcie_reg_field_info_bcm7278[] = { ++ [RGR1_SW_INIT_1_INIT_MASK] = 0x1, ++ [RGR1_SW_INIT_1_INIT_SHIFT] = 0x0, ++}; ++ ++static const int pcie_offset_bcm7425[] = { ++ [RGR1_SW_INIT_1] = 0x8010, ++ [EXT_CFG_INDEX] = 0x8300, ++ [EXT_CFG_DATA] = 0x8304, ++}; ++ ++static const struct pcie_cfg_data bcm7425_cfg = { ++ .reg_field_info = pcie_reg_field_info, ++ .offsets = pcie_offset_bcm7425, ++ .type = BCM7425, ++}; ++ ++static const int pcie_offsets[] = { ++ [RGR1_SW_INIT_1] = 0x9210, ++ [EXT_CFG_INDEX] = 0x9000, ++ [EXT_CFG_DATA] = 0x9004, ++}; ++ ++static const struct pcie_cfg_data bcm7435_cfg = { ++ .reg_field_info = pcie_reg_field_info, ++ .offsets = pcie_offsets, ++ .type = BCM7435, ++}; ++ ++static const struct pcie_cfg_data generic_cfg = { ++ .reg_field_info = pcie_reg_field_info, ++ .offsets = pcie_offsets, ++ .type = GENERIC, ++}; ++ ++static const int pcie_offset_bcm7278[] = { ++ [RGR1_SW_INIT_1] = 0xc010, ++ [EXT_CFG_INDEX] = 0x9000, ++ [EXT_CFG_DATA] = 0x9004, ++}; ++ ++static const struct pcie_cfg_data bcm7278_cfg = { ++ .reg_field_info = pcie_reg_field_info_bcm7278, ++ .offsets = pcie_offset_bcm7278, ++ .type = BCM7278, ++}; ++ ++static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn, ++ int where); ++ ++static struct pci_ops brcm_pcie_ops = { ++ .map_bus = brcm_pcie_map_conf, ++ .read = pci_generic_config_read, ++ .write = pci_generic_config_write, ++}; ++ ++#if defined(CONFIG_MIPS) ++/* Broadcom MIPs HW implicitly does the swapping if necessary */ ++#define bcm_readl(a) __raw_readl(a) ++#define bcm_writel(d, a) __raw_writel(d, a) ++#define bcm_readw(a) __raw_readw(a) ++#define bcm_writew(d, a) __raw_writew(d, a) ++#else ++#define bcm_readl(a) readl(a) ++#define bcm_writel(d, a) writel(d, a) ++#define bcm_readw(a) readw(a) ++#define bcm_writew(d, a) writew(d, a) ++#endif ++ ++/* These macros extract/insert fields to host controller's register set. */ ++#define RD_FLD(base, reg, field) \ ++ rd_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT) ++#define WR_FLD(base, reg, field, val) \ ++ wr_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val) ++#define WR_FLD_RB(base, reg, field, val) \ ++ wr_fld_rb(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val) ++#define WR_FLD_WITH_OFFSET(base, off, reg, field, val) \ ++ wr_fld(base + reg + off, reg##_##field##_MASK, \ ++ reg##_##field##_SHIFT, val) ++#define EXTRACT_FIELD(val, reg, field) \ ++ ((val & reg##_##field##_MASK) >> reg##_##field##_SHIFT) ++#define INSERT_FIELD(val, reg, field, field_val) \ ++ ((val & ~reg##_##field##_MASK) | \ ++ (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT))) ++ ++static phys_addr_t scb_size[BRCM_MAX_SCB]; ++static int num_memc; ++static int num_pcie; ++static DEFINE_MUTEX(brcm_pcie_lock); ++ ++static u32 rd_fld(void __iomem *p, u32 mask, int shift) ++{ ++ return (bcm_readl(p) & mask) >> shift; ++} ++ ++static void wr_fld(void __iomem *p, u32 mask, int shift, u32 val) ++{ ++ u32 reg = bcm_readl(p); ++ ++ reg = (reg & ~mask) | ((val << shift) & mask); ++ bcm_writel(reg, p); ++} ++ ++static void wr_fld_rb(void __iomem *p, u32 mask, int shift, u32 val) ++{ ++ wr_fld(p, mask, shift, val); ++ (void)bcm_readl(p); ++} ++ ++static const char *link_speed_to_str(int s) ++{ ++ switch (s) { ++ case 1: ++ return "2.5"; ++ case 2: ++ return "5.0"; ++ case 3: ++ return "8.0"; ++ default: ++ break; ++ } ++ return "???"; ++} ++ ++/* ++ * The roundup_pow_of_two() from log2.h invokes ++ * __roundup_pow_of_two(unsigned long), but we really need a ++ * such a function to take a native u64 since unsigned long ++ * is 32 bits on some configurations. So we provide this helper ++ * function below. ++ */ ++static u64 roundup_pow_of_two_64(u64 n) ++{ ++ return 1ULL << fls64(n - 1); ++} ++ ++/* ++ * This is to convert the size of the inbound "BAR" region to the ++ * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE ++ */ ++int encode_ibar_size(u64 size) ++{ ++ int log2_in = ilog2(size); ++ ++ if (log2_in >= 12 && log2_in <= 15) ++ /* Covers 4KB to 32KB (inclusive) */ ++ return (log2_in - 12) + 0x1c; ++ else if (log2_in >= 16 && log2_in <= 37) ++ /* Covers 64KB to 32GB, (inclusive) */ ++ return log2_in - 15; ++ /* Something is awry so disable */ ++ return 0; ++} ++ ++static u32 mdio_form_pkt(int port, int regad, int cmd) ++{ ++ u32 pkt = 0; ++ ++ pkt |= (port << MDIO_PORT_SHIFT) & MDIO_PORT_MASK; ++ pkt |= (regad << MDIO_REGAD_SHIFT) & MDIO_REGAD_MASK; ++ pkt |= (cmd << MDIO_CMD_SHIFT) & MDIO_CMD_MASK; ++ ++ return pkt; ++} ++ ++/* negative return value indicates error */ ++static int mdio_read(void __iomem *base, u8 port, u8 regad) ++{ ++ int tries; ++ u32 data; ++ ++ bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_READ), ++ base + PCIE_RC_DL_MDIO_ADDR); ++ bcm_readl(base + PCIE_RC_DL_MDIO_ADDR); ++ ++ data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA); ++ for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) { ++ udelay(10); ++ data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA); ++ } ++ ++ return MDIO_RD_DONE(data) ++ ? (data & MDIO_DATA_MASK) >> MDIO_DATA_SHIFT ++ : -EIO; ++} ++ ++/* negative return value indicates error */ ++static int mdio_write(void __iomem *base, u8 port, u8 regad, u16 wrdata) ++{ ++ int tries; ++ u32 data; ++ ++ bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_WRITE), ++ base + PCIE_RC_DL_MDIO_ADDR); ++ bcm_readl(base + PCIE_RC_DL_MDIO_ADDR); ++ bcm_writel(MDIO_DATA_DONE_MASK | wrdata, ++ base + PCIE_RC_DL_MDIO_WR_DATA); ++ ++ data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA); ++ for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) { ++ udelay(10); ++ data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA); ++ } ++ ++ return MDIO_WT_DONE(data) ? 0 : -EIO; ++} ++ ++/* ++ * Configures device for Spread Spectrum Clocking (SSC) mode; a negative ++ * return value indicates error. ++ */ ++static int set_ssc(void __iomem *base) ++{ ++ int tmp; ++ u16 wrdata; ++ int pll, ssc; ++ ++ tmp = mdio_write(base, MDIO_PORT0, SET_ADDR_OFFSET, SSC_REGS_ADDR); ++ if (tmp < 0) ++ return tmp; ++ ++ tmp = mdio_read(base, MDIO_PORT0, SSC_CNTL_OFFSET); ++ if (tmp < 0) ++ return tmp; ++ ++ wrdata = INSERT_FIELD(tmp, SSC_CNTL_OVRD, EN, 1); ++ wrdata = INSERT_FIELD(wrdata, SSC_CNTL_OVRD, VAL, 1); ++ tmp = mdio_write(base, MDIO_PORT0, SSC_CNTL_OFFSET, wrdata); ++ if (tmp < 0) ++ return tmp; ++ ++ usleep_range(1000, 2000); ++ tmp = mdio_read(base, MDIO_PORT0, SSC_STATUS_OFFSET); ++ if (tmp < 0) ++ return tmp; ++ ++ ssc = EXTRACT_FIELD(tmp, SSC_STATUS, SSC); ++ pll = EXTRACT_FIELD(tmp, SSC_STATUS, PLL_LOCK); ++ ++ return (ssc && pll) ? 0 : -EIO; ++} ++ ++/* Limits operation to a specific generation (1, 2, or 3) */ ++static void set_gen(void __iomem *base, int gen) ++{ ++ u32 lnkcap = bcm_readl(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); ++ u16 lnkctl2 = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); ++ ++ lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen; ++ bcm_writel(lnkcap, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); ++ ++ lnkctl2 = (lnkctl2 & ~0xf) | gen; ++ bcm_writew(lnkctl2, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); ++} ++ ++static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie, ++ unsigned int win, phys_addr_t cpu_addr, ++ dma_addr_t pcie_addr, dma_addr_t size) ++{ ++ void __iomem *base = pcie->base; ++ phys_addr_t cpu_addr_mb, limit_addr_mb; ++ u32 tmp; ++ ++ /* Set the base of the pcie_addr window */ ++ bcm_writel(lower_32_bits(pcie_addr) + MMIO_ENDIAN, ++ base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + (win * 8)); ++ bcm_writel(upper_32_bits(pcie_addr), ++ base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + (win * 8)); ++ ++ cpu_addr_mb = cpu_addr >> 20; ++ limit_addr_mb = (cpu_addr + size - 1) >> 20; ++ ++ /* Write the addr base low register */ ++ WR_FLD_WITH_OFFSET(base, (win * 4), ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT, ++ BASE, cpu_addr_mb); ++ /* Write the addr limit low register */ ++ WR_FLD_WITH_OFFSET(base, (win * 4), ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT, ++ LIMIT, limit_addr_mb); ++ ++ if (pcie->type != BCM7435 && pcie->type != BCM7425) { ++ /* Write the cpu addr high register */ ++ tmp = (u32)(cpu_addr_mb >> ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS); ++ WR_FLD_WITH_OFFSET(base, (win * 8), ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI, ++ BASE, tmp); ++ /* Write the cpu limit high register */ ++ tmp = (u32)(limit_addr_mb >> ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS); ++ WR_FLD_WITH_OFFSET(base, (win * 8), ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI, ++ LIMIT, tmp); ++ } ++} ++ ++/* Configuration space read/write support */ ++static int cfg_index(int busnr, int devfn, int reg) ++{ ++ return ((PCI_SLOT(devfn) & 0x1f) << PCIE_SLOT_SHIFT) ++ | ((PCI_FUNC(devfn) & 0x07) << PCIE_FUNC_SHIFT) ++ | (busnr << PCIE_BUSNUM_SHIFT) ++ | (reg & ~3); ++} ++ ++/* The controller is capable of serving in both RC and EP roles */ ++static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie) ++{ ++ void __iomem *base = pcie->base; ++ u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS); ++ ++ return !!EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PORT); ++} ++ ++static bool brcm_pcie_link_up(struct brcm_pcie *pcie) ++{ ++ void __iomem *base = pcie->base; ++ u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS); ++ u32 dla = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_DL_ACTIVE); ++ u32 plu = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PHYLINKUP); ++ ++ return (dla && plu) ? true : false; ++} ++ ++static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn, ++ int where) ++{ ++ struct brcm_pcie *pcie = bus->sysdata; ++ void __iomem *base = pcie->base; ++ int idx; ++ ++ /* Accesses to the RC go right to the RC registers if slot==0 */ ++ if (pci_is_root_bus(bus)) ++ return PCI_SLOT(devfn) ? NULL : base + where; ++ ++ /* For devices, write to the config space index register */ ++ idx = cfg_index(bus->number, devfn, where); ++ bcm_writel(idx, pcie->base + IDX_ADDR(pcie)); ++ return base + DATA_ADDR(pcie) + (where & 0x3); ++} ++ ++static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, ++ unsigned int val) ++{ ++ unsigned int shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT]; ++ u32 mask = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK]; ++ ++ wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie), mask, shift, val); ++} ++ ++static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, ++ unsigned int val) ++{ ++ if (pcie->type != BCM7278) ++ wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie), ++ PCIE_RGR1_SW_INIT_1_PERST_MASK, ++ PCIE_RGR1_SW_INIT_1_PERST_SHIFT, val); ++ else ++ /* Assert = 0, de-assert = 1 on 7278 */ ++ WR_FLD_RB(pcie->base, PCIE_MISC_PCIE_CTRL, PCIE_PERSTB, !val); ++} ++ ++static int brcm_pcie_add_controller(struct brcm_pcie *pcie) ++{ ++ int i, ret = 0; ++ ++ mutex_lock(&brcm_pcie_lock); ++ if (num_pcie > 0) { ++ num_pcie++; ++ goto done; ++ } ++ ++ /* Determine num_memc and their sizes */ ++ for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { ++ u64 size = brcmstb_memory_memc_size(i); ++ ++ if (size == (u64)-1) { ++ dev_err(pcie->dev, "cannot get memc%d size\n", i); ++ ret = -EINVAL; ++ goto done; ++ } else if (size) { ++ scb_size[i] = roundup_pow_of_two_64(size); ++ num_memc++; ++ } else { ++ break; ++ } ++ } ++ if (!ret && num_memc == 0) { ++ ret = -EINVAL; ++ goto done; ++ } ++ ++ num_pcie++; ++done: ++ mutex_unlock(&brcm_pcie_lock); ++ return ret; ++} ++ ++static void brcm_pcie_remove_controller(struct brcm_pcie *pcie) ++{ ++ mutex_lock(&brcm_pcie_lock); ++ if (--num_pcie == 0) ++ num_memc = 0; ++ mutex_unlock(&brcm_pcie_lock); ++} ++ ++static int brcm_pcie_parse_request_of_pci_ranges(struct brcm_pcie *pcie) ++{ ++ struct resource_entry *win; ++ int ret; ++ ++ ret = devm_of_pci_get_host_bridge_resources(pcie->dev, 0, 0xff, ++ &pcie->resources, NULL); ++ if (ret) { ++ dev_err(pcie->dev, "failed to get host resources\n"); ++ return ret; ++ } ++ ++ resource_list_for_each_entry(win, &pcie->resources) { ++ struct resource *parent, *res = win->res; ++ dma_addr_t offset = (dma_addr_t)win->offset; ++ ++ if (resource_type(res) == IORESOURCE_IO) { ++ parent = &ioport_resource; ++ } else if (resource_type(res) == IORESOURCE_MEM) { ++ if (pcie->num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) { ++ dev_err(pcie->dev, "too many outbound wins\n"); ++ return -EINVAL; ++ } ++ pcie->out_wins[pcie->num_out_wins].cpu_addr ++ = (phys_addr_t)res->start; ++ pcie->out_wins[pcie->num_out_wins].pcie_addr ++ = (dma_addr_t)(res->start ++ - (phys_addr_t)offset); ++ pcie->out_wins[pcie->num_out_wins].size ++ = (dma_addr_t)(res->end - res->start + 1); ++ pcie->num_out_wins++; ++ parent = &iomem_resource; ++ } else { ++ continue; ++ } ++ ++ ret = devm_request_resource(pcie->dev, parent, res); ++ if (ret) { ++ dev_err(pcie->dev, "failed to get res %pR\n", res); ++ return ret; ++ } ++ } ++ return 0; ++} ++ ++static int brcm_pcie_setup(struct brcm_pcie *pcie) ++{ ++ void __iomem *base = pcie->base; ++ unsigned int scb_size_val; ++ u64 rc_bar2_offset, rc_bar2_size, total_mem_size = 0; ++ u32 tmp, burst; ++ int i, j, ret, limit; ++ u16 nlw, cls, lnksta; ++ bool ssc_good = false; ++ struct device *dev = pcie->dev; ++ ++ /* Reset the bridge */ ++ brcm_pcie_bridge_sw_init_set(pcie, 1); ++ ++ /* ++ * Ensure that the fundamental reset is asserted, except for 7278, ++ * which fails if we do this. ++ */ ++ if (pcie->type != BCM7278) ++ brcm_pcie_perst_set(pcie, 1); ++ ++ usleep_range(100, 200); ++ ++ /* Take the bridge out of reset */ ++ brcm_pcie_bridge_sw_init_set(pcie, 0); ++ ++ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0); ++ /* Wait for SerDes to be stable */ ++ usleep_range(100, 200); ++ ++ /* Grab the PCIe hw revision number */ ++ tmp = bcm_readl(base + PCIE_MISC_REVISION); ++ pcie->rev = EXTRACT_FIELD(tmp, PCIE_MISC_REVISION, MAJMIN); ++ ++ /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */ ++ tmp = INSERT_FIELD(0, PCIE_MISC_MISC_CTRL, SCB_ACCESS_EN, 1); ++ tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, CFG_READ_UR_MODE, 1); ++ burst = (pcie->type == GENERIC || pcie->type == BCM7278) ++ ? BURST_SIZE_512 : BURST_SIZE_256; ++ tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE, burst); ++ bcm_writel(tmp, base + PCIE_MISC_MISC_CTRL); ++ ++ /* ++ * Set up inbound memory view for the EP (called RC_BAR2, ++ * not to be confused with the BARs that are advertised by ++ * the EP). ++ */ ++ for (i = 0; i < num_memc; i++) ++ total_mem_size += scb_size[i]; ++ ++ /* ++ * The PCIe host controller by design must set the inbound ++ * viewport to be a contiguous arrangement of all of the ++ * system's memory. In addition, its size mut be a power of ++ * two. To further complicate matters, the viewport must ++ * start on a pcie-address that is aligned on a multiple of its ++ * size. If a portion of the viewport does not represent ++ * system memory -- e.g. 3GB of memory requires a 4GB viewport ++ * -- we can map the outbound memory in or after 3GB and even ++ * though the viewport will overlap the outbound memory the ++ * controller will know to send outbound memory downstream and ++ * everything else upstream. ++ */ ++ rc_bar2_size = roundup_pow_of_two_64(total_mem_size); ++ ++ /* ++ * Set simple configuration based on memory sizes ++ * only. We always start the viewport at address 0. ++ */ ++ rc_bar2_offset = 0; ++ ++ tmp = lower_32_bits(rc_bar2_offset); ++ tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE, ++ encode_ibar_size(rc_bar2_size)); ++ bcm_writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO); ++ bcm_writel(upper_32_bits(rc_bar2_offset), ++ base + PCIE_MISC_RC_BAR2_CONFIG_HI); ++ ++ scb_size_val = scb_size[0] ++ ? ilog2(scb_size[0]) - 15 : 0xf; /* 0xf is 1GB */ ++ WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB0_SIZE, scb_size_val); ++ ++ if (num_memc > 1) { ++ scb_size_val = scb_size[1] ++ ? ilog2(scb_size[1]) - 15 : 0xf; /* 0xf is 1GB */ ++ WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB1_SIZE, scb_size_val); ++ } ++ ++ if (num_memc > 2) { ++ scb_size_val = scb_size[2] ++ ? ilog2(scb_size[2]) - 15 : 0xf; /* 0xf is 1GB */ ++ WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB2_SIZE, scb_size_val); ++ } ++ ++ /* disable the PCIe->GISB memory window (RC_BAR1) */ ++ WR_FLD(base, PCIE_MISC_RC_BAR1_CONFIG_LO, SIZE, 0); ++ ++ /* disable the PCIe->SCB memory window (RC_BAR3) */ ++ WR_FLD(base, PCIE_MISC_RC_BAR3_CONFIG_LO, SIZE, 0); ++ ++ if (!pcie->suspended) { ++ /* clear any interrupts we find on boot */ ++ bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + CLR); ++ (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + CLR); ++ } ++ ++ /* Mask all interrupts since we are not handling any yet */ ++ bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + MASK_SET); ++ (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + MASK_SET); ++ ++ if (pcie->gen) ++ set_gen(base, pcie->gen); ++ ++ /* Unassert the fundamental reset */ ++ brcm_pcie_perst_set(pcie, 0); ++ ++ /* ++ * Give the RC/EP time to wake up, before trying to configure RC. ++ * Intermittently check status for link-up, up to a total of 100ms ++ * when we don't know if the device is there, and up to 1000ms if ++ * we do know the device is there. ++ */ ++ limit = pcie->suspended ? 1000 : 100; ++ for (i = 1, j = 0; j < limit && !brcm_pcie_link_up(pcie); ++ j += i, i = i * 2) ++ msleep(i + j > limit ? limit - j : i); ++ ++ if (!brcm_pcie_link_up(pcie)) { ++ dev_info(dev, "link down\n"); ++ return -ENODEV; ++ } ++ ++ if (!brcm_pcie_rc_mode(pcie)) { ++ dev_err(dev, "PCIe misconfigured; is in EP mode\n"); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < pcie->num_out_wins; i++) ++ brcm_pcie_set_outbound_win(pcie, i, pcie->out_wins[i].cpu_addr, ++ pcie->out_wins[i].pcie_addr, ++ pcie->out_wins[i].size); ++ ++ /* ++ * For config space accesses on the RC, show the right class for ++ * a PCIe-PCIe bridge (the default setting is to be EP mode). ++ */ ++ WR_FLD_RB(base, PCIE_RC_CFG_PRIV1_ID_VAL3, CLASS_CODE, 0x060400); ++ ++ if (pcie->ssc) { ++ ret = set_ssc(base); ++ if (ret == 0) ++ ssc_good = true; ++ else ++ dev_err(dev, "failed attempt to enter ssc mode\n"); ++ } ++ ++ lnksta = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA); ++ cls = lnksta & PCI_EXP_LNKSTA_CLS; ++ nlw = (lnksta & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT; ++ dev_info(dev, "link up, %s Gbps x%u %s\n", link_speed_to_str(cls), ++ nlw, ssc_good ? "(SSC)" : "(!SSC)"); ++ ++ /* PCIe->SCB endian mode for BAR */ ++ /* field ENDIAN_MODE_BAR2 = DATA_ENDIAN */ ++ WR_FLD_RB(base, PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1, ++ ENDIAN_MODE_BAR2, DATA_ENDIAN); ++ ++ /* ++ * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1 ++ * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1. ++ */ ++ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, CLKREQ_DEBUG_ENABLE, 1); ++ ++ return 0; ++} ++ ++/* L23 is a low-power PCIe link state */ ++static void enter_l23(struct brcm_pcie *pcie) ++{ ++ void __iomem *base = pcie->base; ++ int tries, l23; ++ ++ /* assert request for L23 */ ++ WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 1); ++ /* poll L23 status */ ++ for (tries = 0, l23 = 0; tries < 1000 && !l23; tries++) ++ l23 = RD_FLD(base, PCIE_MISC_PCIE_STATUS, PCIE_LINK_IN_L23); ++ if (!l23) ++ dev_err(pcie->dev, "failed to enter L23\n"); ++} ++ ++static void turn_off(struct brcm_pcie *pcie) ++{ ++ void __iomem *base = pcie->base; ++ ++ if (brcm_pcie_link_up(pcie)) ++ enter_l23(pcie); ++ /* Assert fundamental reset */ ++ brcm_pcie_perst_set(pcie, 1); ++ /* Deassert request for L23 in case it was asserted */ ++ WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 0); ++ /* Turn off SerDes */ ++ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 1); ++ /* Shutdown PCIe bridge */ ++ brcm_pcie_bridge_sw_init_set(pcie, 1); ++} ++ ++static int brcm_pcie_suspend(struct device *dev) ++{ ++ struct brcm_pcie *pcie = dev_get_drvdata(dev); ++ ++ turn_off(pcie); ++ clk_disable_unprepare(pcie->clk); ++ pcie->suspended = true; ++ ++ return 0; ++} ++ ++static int brcm_pcie_resume(struct device *dev) ++{ ++ struct brcm_pcie *pcie = dev_get_drvdata(dev); ++ void __iomem *base; ++ int ret; ++ ++ base = pcie->base; ++ clk_prepare_enable(pcie->clk); ++ ++ /* Take bridge out of reset so we can access the SerDes reg */ ++ brcm_pcie_bridge_sw_init_set(pcie, 0); ++ ++ /* Turn on SerDes */ ++ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0); ++ /* Wait for SerDes to be stable */ ++ usleep_range(100, 200); ++ ++ ret = brcm_pcie_setup(pcie); ++ if (ret) ++ return ret; ++ ++ pcie->suspended = false; ++ ++ return 0; ++} ++ ++static void _brcm_pcie_remove(struct brcm_pcie *pcie) ++{ ++ turn_off(pcie); ++ clk_disable_unprepare(pcie->clk); ++ clk_put(pcie->clk); ++ brcm_pcie_remove_controller(pcie); ++} ++ ++static int brcm_pcie_remove(struct platform_device *pdev) ++{ ++ struct brcm_pcie *pcie = platform_get_drvdata(pdev); ++ ++ pci_stop_root_bus(pcie->root_bus); ++ pci_remove_root_bus(pcie->root_bus); ++ _brcm_pcie_remove(pcie); ++ ++ return 0; ++} ++ ++static const struct of_device_id brcm_pcie_match[] = { ++ { .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg }, ++ { .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg }, ++ { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg }, ++ { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, brcm_pcie_match); ++ ++static int brcm_pcie_probe(struct platform_device *pdev) ++{ ++ struct device_node *dn = pdev->dev.of_node; ++ const struct of_device_id *of_id; ++ const struct pcie_cfg_data *data; ++ int ret; ++ struct brcm_pcie *pcie; ++ struct resource *res; ++ void __iomem *base; ++ u32 tmp; ++ struct pci_host_bridge *bridge; ++ struct pci_bus *child; ++ ++ bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); ++ if (!bridge) ++ return -ENOMEM; ++ ++ pcie = pci_host_bridge_priv(bridge); ++ INIT_LIST_HEAD(&pcie->resources); ++ ++ of_id = of_match_node(brcm_pcie_match, dn); ++ if (!of_id) { ++ dev_err(&pdev->dev, "failed to look up compatible string\n"); ++ return -EINVAL; ++ } ++ ++ if (of_property_read_u32(dn, "dma-ranges", &tmp) == 0) { ++ dev_err(&pdev->dev, "cannot yet handle dma-ranges\n"); ++ return -EINVAL; ++ } ++ ++ data = of_id->data; ++ pcie->reg_offsets = data->offsets; ++ pcie->reg_field_info = data->reg_field_info; ++ pcie->type = data->type; ++ pcie->dn = dn; ++ pcie->dev = &pdev->dev; ++ ++ /* We use the domain number as our controller number */ ++ pcie->id = of_get_pci_domain_nr(dn); ++ if (pcie->id < 0) ++ return pcie->id; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) ++ return -EINVAL; ++ ++ base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ pcie->clk = of_clk_get_by_name(dn, "sw_pcie"); ++ if (IS_ERR(pcie->clk)) { ++ dev_err(&pdev->dev, "could not get clock\n"); ++ pcie->clk = NULL; ++ } ++ pcie->base = base; ++ ++ ret = of_pci_get_max_link_speed(dn); ++ pcie->gen = (ret < 0) ? 0 : ret; ++ ++ pcie->ssc = of_property_read_bool(dn, "brcm,enable-ssc"); ++ ++ ret = irq_of_parse_and_map(pdev->dev.of_node, 0); ++ if (ret == 0) ++ /* keep going, as we don't use this intr yet */ ++ dev_warn(pcie->dev, "cannot get PCIe interrupt\n"); ++ else ++ pcie->irq = ret; ++ ++ ret = brcm_pcie_parse_request_of_pci_ranges(pcie); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(pcie->clk); ++ if (ret) { ++ dev_err(&pdev->dev, "could not enable clock\n"); ++ return ret; ++ } ++ ++ ret = brcm_pcie_add_controller(pcie); ++ if (ret) ++ return ret; ++ ++ ret = brcm_pcie_setup(pcie); ++ if (ret) ++ goto fail; ++ ++ list_splice_init(&pcie->resources, &bridge->windows); ++ bridge->dev.parent = &pdev->dev; ++ bridge->busnr = 0; ++ bridge->ops = &brcm_pcie_ops; ++ bridge->sysdata = pcie; ++ bridge->map_irq = of_irq_parse_and_map_pci; ++ bridge->swizzle_irq = pci_common_swizzle; ++ ++ ret = pci_scan_root_bus_bridge(bridge); ++ if (ret < 0) { ++ dev_err(pcie->dev, "Scanning root bridge failed\n"); ++ goto fail; ++ } ++ ++ pci_assign_unassigned_bus_resources(bridge->bus); ++ list_for_each_entry(child, &bridge->bus->children, node) ++ pcie_bus_configure_settings(child); ++ pci_bus_add_devices(bridge->bus); ++ platform_set_drvdata(pdev, pcie); ++ pcie->root_bus = bridge->bus; ++ ++ return 0; ++ ++fail: ++ _brcm_pcie_remove(pcie); ++ return ret; ++} ++ ++static const struct dev_pm_ops brcm_pcie_pm_ops = { ++ .suspend_noirq = brcm_pcie_suspend, ++ .resume_noirq = brcm_pcie_resume, ++}; ++ ++static struct platform_driver brcm_pcie_driver = { ++ .probe = brcm_pcie_probe, ++ .remove = brcm_pcie_remove, ++ .driver = { ++ .name = "brcm-pcie", ++ .owner = THIS_MODULE, ++ .of_match_table = brcm_pcie_match, ++ .pm = &brcm_pcie_pm_ops, ++ }, ++}; ++ ++module_platform_driver(brcm_pcie_driver); ++ ++MODULE_LICENSE("GPL v2"); ++MODULE_DESCRIPTION("Broadcom STB PCIe RC driver"); ++MODULE_AUTHOR("Broadcom"); +--- /dev/null ++++ b/include/soc/brcmstb/memory_api.h +@@ -0,0 +1,25 @@ ++#ifndef __MEMORY_API_H ++#define __MEMORY_API_H ++ ++/* ++ * Bus Interface Unit control register setup, must happen early during boot, ++ * before SMP is brought up, called by machine entry point. ++ */ ++void brcmstb_biuctrl_init(void); ++ ++#ifdef CONFIG_SOC_BRCMSTB ++int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa); ++u64 brcmstb_memory_memc_size(int memc); ++#else ++static inline int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa) ++{ ++ return -EINVAL; ++} ++ ++static inline u64 brcmstb_memory_memc_size(int memc) ++{ ++ return -1; ++} ++#endif ++ ++#endif /* __MEMORY_API_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0480-staging-bcm2835-codec-Correct-port-width-calc-for-tr.patch b/target/linux/brcm2708/patches-4.19/950-0480-staging-bcm2835-codec-Correct-port-width-calc-for-tr.patch deleted file mode 100644 index 5f73a1ef91..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0480-staging-bcm2835-codec-Correct-port-width-calc-for-tr.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 453caa19909edf2de1add80b369fb30570a440ed Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 2 May 2019 14:30:24 +0100 -Subject: [PATCH 480/806] staging: bcm2835-codec: Correct port width calc for - truncation - -The calculation converting from V4L2 bytesperline to MMAL -width had an operator ordering issue that lead to Bayer raw 10 -(and 12 and 14) setting an incorrect stride for the buffer. -Correct this operation ordering issue. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -605,8 +605,8 @@ static void setup_mmal_port_format(struc - - if (!(q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED)) { - /* Raw image format - set width/height */ -- port->es.video.width = q_data->bytesperline / -- (q_data->fmt->depth >> 3); -+ port->es.video.width = (q_data->bytesperline << 3) / -+ q_data->fmt->depth; - port->es.video.height = q_data->height; - port->es.video.crop.width = q_data->crop_width; - port->es.video.crop.height = q_data->crop_height; diff --git a/target/linux/brcm2708/patches-4.19/950-0481-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch b/target/linux/brcm2708/patches-4.19/950-0481-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch new file mode 100644 index 0000000000..75615e372f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0481-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch @@ -0,0 +1,569 @@ +From d3cc1c713b9436a7dc72788caa1d8de63ac3a01b Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 19 Feb 2019 22:06:59 +0000 +Subject: [PATCH] PCI: brcmstb: Add dma-range mapping for inbound + traffic + +The Broadcom STB PCIe host controller is intimately related to the +memory subsystem. This close relationship adds complexity to how cpu +system memory is mapped to PCIe memory. Ideally, this mapping is an +identity mapping, or an identity mapping off by a constant. Not so in +this case. + +Consider the Broadcom reference board BCM97445LCC_4X8 which has 6 GB +of system memory. Here is how the PCIe controller maps the +system memory to PCIe memory: + + memc0-a@[ 0....3fffffff] <=> pci@[ 0....3fffffff] + memc0-b@[100000000...13fffffff] <=> pci@[ 40000000....7fffffff] + memc1-a@[ 40000000....7fffffff] <=> pci@[ 80000000....bfffffff] + memc1-b@[300000000...33fffffff] <=> pci@[ c0000000....ffffffff] + memc2-a@[ 80000000....bfffffff] <=> pci@[100000000...13fffffff] + memc2-b@[c00000000...c3fffffff] <=> pci@[140000000...17fffffff] + +Although there are some "gaps" that can be added between the +individual mappings by software, the permutation of memory regions for +the most part is fixed by HW. The solution of having something close +to an identity mapping is not possible. + +The idea behind this HW design is that the same PCIe module can +act as an RC or EP, and if it acts as an EP it concatenates all +of system memory into a BAR so anything can be accessed. Unfortunately, +when the PCIe block is in the role of an RC it also presents this +"BAR" to downstream PCIe devices, rather than offering an identity map +between its system memory and PCIe space. + +Suppose that an endpoint driver allocs some DMA memory. Suppose this +memory is located at 0x6000_0000, which is in the middle of memc1-a. +The driver wants a dma_addr_t value that it can pass on to the EP to +use. Without doing any custom mapping, the EP will use this value for +DMA: the driver will get a dma_addr_t equal to 0x6000_0000. But this +won't work; the device needs a dma_addr_t that reflects the PCIe space +address, namely 0xa000_0000. + +So, essentially the solution to this problem must modify the +dma_addr_t returned by the DMA routines routines. There are two +ways (I know of) of doing this: + +(a) overriding/redefining the dma_to_phys() and phys_to_dma() calls +that are used by the dma_ops routines. This is the approach of + + arch/mips/cavium-octeon/dma-octeon.c + +In ARM and ARM64 these two routines are defiend in asm/dma-mapping.h +as static inline functions. + +(b) Subscribe to a notifier that notifies when a device is added to a +bus. When this happens, set_dma_ops() can be called for the device. +This method is mentioned in: + + http://lxr.free-electrons.com/source/drivers/of/platform.c?v=3.16#L152 + +where it says as a comment + + "In case if platform code need to use own special DMA + configuration, it can use Platform bus notifier and + handle BUS_NOTIFY_ADD_DEVICE event to fix up DMA + configuration." + +Solution (b) is what this commit does. It uses its own set of +dma_ops which are wrappers around the arch_dma_ops. The +wrappers translate the dma addresses before/after invoking +the arch_dma_ops, as appropriate. + +Signed-off-by: Jim Quinlan +--- + drivers/pci/controller/pcie-brcmstb.c | 420 +++++++++++++++++++++++++- + 1 file changed, 411 insertions(+), 9 deletions(-) + +--- a/drivers/pci/controller/pcie-brcmstb.c ++++ b/drivers/pci/controller/pcie-brcmstb.c +@@ -4,6 +4,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -319,11 +320,307 @@ static struct pci_ops brcm_pcie_ops = { + ((val & ~reg##_##field##_MASK) | \ + (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT))) + ++static const struct dma_map_ops *arch_dma_ops; ++static const struct dma_map_ops *brcm_dma_ops_ptr; ++static struct of_pci_range *dma_ranges; ++static int num_dma_ranges; ++ + static phys_addr_t scb_size[BRCM_MAX_SCB]; + static int num_memc; + static int num_pcie; + static DEFINE_MUTEX(brcm_pcie_lock); + ++static dma_addr_t brcm_to_pci(dma_addr_t addr) ++{ ++ struct of_pci_range *p; ++ ++ if (!num_dma_ranges) ++ return addr; ++ ++ for (p = dma_ranges; p < &dma_ranges[num_dma_ranges]; p++) ++ if (addr >= p->cpu_addr && addr < (p->cpu_addr + p->size)) ++ return addr - p->cpu_addr + p->pci_addr; ++ ++ return addr; ++} ++ ++static dma_addr_t brcm_to_cpu(dma_addr_t addr) ++{ ++ struct of_pci_range *p; ++ ++ if (!num_dma_ranges) ++ return addr; ++ ++ for (p = dma_ranges; p < &dma_ranges[num_dma_ranges]; p++) ++ if (addr >= p->pci_addr && addr < (p->pci_addr + p->size)) ++ return addr - p->pci_addr + p->cpu_addr; ++ ++ return addr; ++} ++ ++static void *brcm_alloc(struct device *dev, size_t size, dma_addr_t *handle, ++ gfp_t gfp, unsigned long attrs) ++{ ++ void *ret; ++ ++ ret = arch_dma_ops->alloc(dev, size, handle, gfp, attrs); ++ if (ret) ++ *handle = brcm_to_pci(*handle); ++ return ret; ++} ++ ++static void brcm_free(struct device *dev, size_t size, void *cpu_addr, ++ dma_addr_t handle, unsigned long attrs) ++{ ++ handle = brcm_to_cpu(handle); ++ arch_dma_ops->free(dev, size, cpu_addr, handle, attrs); ++} ++ ++static int brcm_mmap(struct device *dev, struct vm_area_struct *vma, ++ void *cpu_addr, dma_addr_t dma_addr, size_t size, ++ unsigned long attrs) ++{ ++ dma_addr = brcm_to_cpu(dma_addr); ++ return arch_dma_ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs); ++} ++ ++static int brcm_get_sgtable(struct device *dev, struct sg_table *sgt, ++ void *cpu_addr, dma_addr_t handle, size_t size, ++ unsigned long attrs) ++{ ++ handle = brcm_to_cpu(handle); ++ return arch_dma_ops->get_sgtable(dev, sgt, cpu_addr, handle, size, ++ attrs); ++} ++ ++static dma_addr_t brcm_map_page(struct device *dev, struct page *page, ++ unsigned long offset, size_t size, ++ enum dma_data_direction dir, ++ unsigned long attrs) ++{ ++ return brcm_to_pci(arch_dma_ops->map_page(dev, page, offset, size, ++ dir, attrs)); ++} ++ ++static void brcm_unmap_page(struct device *dev, dma_addr_t handle, ++ size_t size, enum dma_data_direction dir, ++ unsigned long attrs) ++{ ++ handle = brcm_to_cpu(handle); ++ arch_dma_ops->unmap_page(dev, handle, size, dir, attrs); ++} ++ ++static int brcm_map_sg(struct device *dev, struct scatterlist *sgl, ++ int nents, enum dma_data_direction dir, ++ unsigned long attrs) ++{ ++ int i, j; ++ struct scatterlist *sg; ++ ++ for_each_sg(sgl, sg, nents, i) { ++#ifdef CONFIG_NEED_SG_DMA_LENGTH ++ sg->dma_length = sg->length; ++#endif ++ sg->dma_address = ++ brcm_dma_ops_ptr->map_page(dev, sg_page(sg), sg->offset, ++ sg->length, dir, attrs); ++ if (dma_mapping_error(dev, sg->dma_address)) ++ goto bad_mapping; ++ } ++ return nents; ++ ++bad_mapping: ++ for_each_sg(sgl, sg, i, j) ++ brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg), ++ sg_dma_len(sg), dir, attrs); ++ return 0; ++} ++ ++static void brcm_unmap_sg(struct device *dev, ++ struct scatterlist *sgl, int nents, ++ enum dma_data_direction dir, ++ unsigned long attrs) ++{ ++ int i; ++ struct scatterlist *sg; ++ ++ for_each_sg(sgl, sg, nents, i) ++ brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg), ++ sg_dma_len(sg), dir, attrs); ++} ++ ++static void brcm_sync_single_for_cpu(struct device *dev, ++ dma_addr_t handle, size_t size, ++ enum dma_data_direction dir) ++{ ++ handle = brcm_to_cpu(handle); ++ arch_dma_ops->sync_single_for_cpu(dev, handle, size, dir); ++} ++ ++static void brcm_sync_single_for_device(struct device *dev, ++ dma_addr_t handle, size_t size, ++ enum dma_data_direction dir) ++{ ++ handle = brcm_to_cpu(handle); ++ arch_dma_ops->sync_single_for_device(dev, handle, size, dir); ++} ++ ++static dma_addr_t brcm_map_resource(struct device *dev, phys_addr_t phys, ++ size_t size, ++ enum dma_data_direction dir, ++ unsigned long attrs) ++{ ++ if (arch_dma_ops->map_resource) ++ return brcm_to_pci(arch_dma_ops->map_resource ++ (dev, phys, size, dir, attrs)); ++ return brcm_to_pci((dma_addr_t)phys); ++} ++ ++static void brcm_unmap_resource(struct device *dev, dma_addr_t handle, ++ size_t size, enum dma_data_direction dir, ++ unsigned long attrs) ++{ ++ if (arch_dma_ops->unmap_resource) ++ arch_dma_ops->unmap_resource(dev, brcm_to_cpu(handle), size, ++ dir, attrs); ++} ++ ++void brcm_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl, ++ int nents, enum dma_data_direction dir) ++{ ++ struct scatterlist *sg; ++ int i; ++ ++ for_each_sg(sgl, sg, nents, i) ++ brcm_dma_ops_ptr->sync_single_for_cpu(dev, sg_dma_address(sg), ++ sg->length, dir); ++} ++ ++void brcm_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, ++ int nents, enum dma_data_direction dir) ++{ ++ struct scatterlist *sg; ++ int i; ++ ++ for_each_sg(sgl, sg, nents, i) ++ brcm_dma_ops_ptr->sync_single_for_device(dev, ++ sg_dma_address(sg), ++ sg->length, dir); ++} ++ ++static int brcm_mapping_error(struct device *dev, dma_addr_t dma_addr) ++{ ++ return arch_dma_ops->mapping_error(dev, dma_addr); ++} ++ ++static int brcm_dma_supported(struct device *dev, u64 mask) ++{ ++ if (num_dma_ranges) { ++ /* ++ * It is our translated addresses that the EP will "see", so ++ * we check all of the ranges for the largest possible value. ++ */ ++ int i; ++ ++ for (i = 0; i < num_dma_ranges; i++) ++ if (dma_ranges[i].pci_addr + dma_ranges[i].size - 1 ++ > mask) ++ return 0; ++ return 1; ++ } ++ ++ return arch_dma_ops->dma_supported(dev, mask); ++} ++ ++#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK ++u64 brcm_get_required_mask)(struct device *dev) ++{ ++ return arch_dma_ops->get_required_mask(dev); ++} ++#endif ++ ++static const struct dma_map_ops brcm_dma_ops = { ++ .alloc = brcm_alloc, ++ .free = brcm_free, ++ .mmap = brcm_mmap, ++ .get_sgtable = brcm_get_sgtable, ++ .map_page = brcm_map_page, ++ .unmap_page = brcm_unmap_page, ++ .map_sg = brcm_map_sg, ++ .unmap_sg = brcm_unmap_sg, ++ .map_resource = brcm_map_resource, ++ .unmap_resource = brcm_unmap_resource, ++ .sync_single_for_cpu = brcm_sync_single_for_cpu, ++ .sync_single_for_device = brcm_sync_single_for_device, ++ .sync_sg_for_cpu = brcm_sync_sg_for_cpu, ++ .sync_sg_for_device = brcm_sync_sg_for_device, ++ .mapping_error = brcm_mapping_error, ++ .dma_supported = brcm_dma_supported, ++#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK ++ .get_required_mask = brcm_get_required_mask, ++#endif ++}; ++ ++static void brcm_set_dma_ops(struct device *dev) ++{ ++ int ret; ++ ++ if (IS_ENABLED(CONFIG_ARM64)) { ++ /* ++ * We are going to invoke get_dma_ops(). That ++ * function, at this point in time, invokes ++ * get_arch_dma_ops(), and for ARM64 that function ++ * returns a pointer to dummy_dma_ops. So then we'd ++ * like to call arch_setup_dma_ops(), but that isn't ++ * exported. Instead, we call of_dma_configure(), ++ * which is exported, and this calls ++ * arch_setup_dma_ops(). Once we do this the call to ++ * get_dma_ops() will work properly because ++ * dev->dma_ops will be set. ++ */ ++ ret = of_dma_configure(dev, dev->of_node, true); ++ if (ret) { ++ dev_err(dev, "of_dma_configure() failed: %d\n", ret); ++ return; ++ } ++ } ++ ++ arch_dma_ops = get_dma_ops(dev); ++ if (!arch_dma_ops) { ++ dev_err(dev, "failed to get arch_dma_ops\n"); ++ return; ++ } ++ ++ set_dma_ops(dev, &brcm_dma_ops); ++} ++ ++static int brcmstb_platform_notifier(struct notifier_block *nb, ++ unsigned long event, void *__dev) ++{ ++ struct device *dev = __dev; ++ ++ brcm_dma_ops_ptr = &brcm_dma_ops; ++ if (event != BUS_NOTIFY_ADD_DEVICE) ++ return NOTIFY_DONE; ++ ++ brcm_set_dma_ops(dev); ++ return NOTIFY_OK; ++} ++ ++static struct notifier_block brcmstb_platform_nb = { ++ .notifier_call = brcmstb_platform_notifier, ++}; ++ ++static int brcm_register_notifier(void) ++{ ++ return bus_register_notifier(&pci_bus_type, &brcmstb_platform_nb); ++} ++ ++static int brcm_unregister_notifier(void) ++{ ++ return bus_unregister_notifier(&pci_bus_type, &brcmstb_platform_nb); ++} ++ + static u32 rd_fld(void __iomem *p, u32 mask, int shift) + { + return (bcm_readl(p) & mask) >> shift; +@@ -597,9 +894,71 @@ static inline void brcm_pcie_perst_set(s + WR_FLD_RB(pcie->base, PCIE_MISC_PCIE_CTRL, PCIE_PERSTB, !val); + } + ++static int pci_dma_range_parser_init(struct of_pci_range_parser *parser, ++ struct device_node *node) ++{ ++ const int na = 3, ns = 2; ++ int rlen; ++ ++ parser->node = node; ++ parser->pna = of_n_addr_cells(node); ++ parser->np = parser->pna + na + ns; ++ ++ parser->range = of_get_property(node, "dma-ranges", &rlen); ++ if (!parser->range) ++ return -ENOENT; ++ ++ parser->end = parser->range + rlen / sizeof(__be32); ++ ++ return 0; ++} ++ ++static int brcm_pcie_parse_map_dma_ranges(struct brcm_pcie *pcie) ++{ ++ int i; ++ struct of_pci_range_parser parser; ++ struct device_node *dn = pcie->dn; ++ ++ /* ++ * Parse dma-ranges property if present. If there are multiple ++ * PCIe controllers, we only have to parse from one of them since ++ * the others will have an identical mapping. ++ */ ++ if (!pci_dma_range_parser_init(&parser, dn)) { ++ unsigned int max_ranges ++ = (parser.end - parser.range) / parser.np; ++ ++ dma_ranges = kcalloc(max_ranges, sizeof(struct of_pci_range), ++ GFP_KERNEL); ++ if (!dma_ranges) ++ return -ENOMEM; ++ ++ for (i = 0; of_pci_range_parser_one(&parser, dma_ranges + i); ++ i++) ++ num_dma_ranges++; ++ } ++ ++ for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { ++ u64 size = brcmstb_memory_memc_size(i); ++ ++ if (size == (u64)-1) { ++ dev_err(pcie->dev, "cannot get memc%d size", i); ++ return -EINVAL; ++ } else if (size) { ++ scb_size[i] = roundup_pow_of_two_64(size); ++ num_memc++; ++ } else { ++ break; ++ } ++ } ++ ++ return 0; ++} ++ + static int brcm_pcie_add_controller(struct brcm_pcie *pcie) + { + int i, ret = 0; ++ struct device *dev = pcie->dev; + + mutex_lock(&brcm_pcie_lock); + if (num_pcie > 0) { +@@ -607,12 +966,21 @@ static int brcm_pcie_add_controller(stru + goto done; + } + ++ ret = brcm_register_notifier(); ++ if (ret) { ++ dev_err(dev, "failed to register pci bus notifier\n"); ++ goto done; ++ } ++ ret = brcm_pcie_parse_map_dma_ranges(pcie); ++ if (ret) ++ goto done; ++ + /* Determine num_memc and their sizes */ + for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { + u64 size = brcmstb_memory_memc_size(i); + + if (size == (u64)-1) { +- dev_err(pcie->dev, "cannot get memc%d size\n", i); ++ dev_err(dev, "cannot get memc%d size\n", i); + ret = -EINVAL; + goto done; + } else if (size) { +@@ -636,8 +1004,16 @@ done: + static void brcm_pcie_remove_controller(struct brcm_pcie *pcie) + { + mutex_lock(&brcm_pcie_lock); +- if (--num_pcie == 0) +- num_memc = 0; ++ if (--num_pcie > 0) ++ goto out; ++ ++ if (brcm_unregister_notifier()) ++ dev_err(pcie->dev, "failed to unregister pci bus notifier\n"); ++ kfree(dma_ranges); ++ dma_ranges = NULL; ++ num_dma_ranges = 0; ++ num_memc = 0; ++out: + mutex_unlock(&brcm_pcie_lock); + } + +@@ -757,6 +1133,38 @@ static int brcm_pcie_setup(struct brcm_p + */ + rc_bar2_offset = 0; + ++ if (dma_ranges) { ++ /* ++ * The best-case scenario is to place the inbound ++ * region in the first 4GB of pci-space, as some ++ * legacy devices can only address 32bits. ++ * We would also like to put the MSI under 4GB ++ * as well, since some devices require a 32bit ++ * MSI target address. ++ */ ++ if (total_mem_size <= 0xc0000000ULL && ++ rc_bar2_size <= 0x100000000ULL) { ++ rc_bar2_offset = 0; ++ } else { ++ /* ++ * The system memory is 4GB or larger so we ++ * cannot start the inbound region at location ++ * 0 (since we have to allow some space for ++ * outbound memory @ 3GB). So instead we ++ * start it at the 1x multiple of its size ++ */ ++ rc_bar2_offset = rc_bar2_size; ++ } ++ ++ } else { ++ /* ++ * Set simple configuration based on memory sizes ++ * only. We always start the viewport at address 0, ++ * and set the MSI target address accordingly. ++ */ ++ rc_bar2_offset = 0; ++ } ++ + tmp = lower_32_bits(rc_bar2_offset); + tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE, + encode_ibar_size(rc_bar2_size)); +@@ -967,7 +1375,6 @@ static int brcm_pcie_probe(struct platfo + struct brcm_pcie *pcie; + struct resource *res; + void __iomem *base; +- u32 tmp; + struct pci_host_bridge *bridge; + struct pci_bus *child; + +@@ -984,11 +1391,6 @@ static int brcm_pcie_probe(struct platfo + return -EINVAL; + } + +- if (of_property_read_u32(dn, "dma-ranges", &tmp) == 0) { +- dev_err(&pdev->dev, "cannot yet handle dma-ranges\n"); +- return -EINVAL; +- } +- + data = of_id->data; + pcie->reg_offsets = data->offsets; + pcie->reg_field_info = data->reg_field_info; diff --git a/target/linux/brcm2708/patches-4.19/950-0481-staging-bcm2835-codec-Remove-height-padding-for-ISP-.patch b/target/linux/brcm2708/patches-4.19/950-0481-staging-bcm2835-codec-Remove-height-padding-for-ISP-.patch deleted file mode 100644 index cdb57e12e3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0481-staging-bcm2835-codec-Remove-height-padding-for-ISP-.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 52e50b0f5017e823428849c42c1029306d790939 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 2 May 2019 14:32:21 +0100 -Subject: [PATCH 481/806] staging: bcm2835-codec: Remove height padding for ISP - role - -The ISP has no need for heights to be a multiple of macroblock -sizes, therefore doesn't require the align on the height. -Remove it for the ISP role. (It is required for the codecs). - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -1015,7 +1015,8 @@ static int vidioc_g_fmt_vid_cap(struct f - return vidioc_g_fmt(file2ctx(file), f); - } - --static int vidioc_try_fmt(struct v4l2_format *f, struct bcm2835_codec_fmt *fmt) -+static int vidioc_try_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f, -+ struct bcm2835_codec_fmt *fmt) - { - /* - * The V4L2 specification requires the driver to correct the format -@@ -1034,11 +1035,13 @@ static int vidioc_try_fmt(struct v4l2_fo - f->fmt.pix.height = MIN_H; - - /* -- * Buffer must have a vertical alignment of 16 lines. -+ * For codecs the buffer must have a vertical alignment of 16 -+ * lines. - * The selection will reflect any cropping rectangle when only - * some of the pixels are active. - */ -- f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); -+ if (ctx->dev->role != ISP) -+ f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); - } - f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, - fmt); -@@ -1065,7 +1068,7 @@ static int vidioc_try_fmt_vid_cap(struct - fmt = find_format(f, ctx->dev, true); - } - -- return vidioc_try_fmt(f, fmt); -+ return vidioc_try_fmt(ctx, f, fmt); - } - - static int vidioc_try_fmt_vid_out(struct file *file, void *priv, -@@ -1084,7 +1087,7 @@ static int vidioc_try_fmt_vid_out(struct - if (!f->fmt.pix.colorspace) - f->fmt.pix.colorspace = ctx->colorspace; - -- return vidioc_try_fmt(f, fmt); -+ return vidioc_try_fmt(ctx, f, fmt); - } - - static int vidioc_s_fmt(struct bcm2835_codec_ctx *ctx, struct v4l2_format *f, diff --git a/target/linux/brcm2708/patches-4.19/950-0482-PCI-brcmstb-Add-MSI-capability.patch b/target/linux/brcm2708/patches-4.19/950-0482-PCI-brcmstb-Add-MSI-capability.patch new file mode 100644 index 0000000000..856bf2bdf4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0482-PCI-brcmstb-Add-MSI-capability.patch @@ -0,0 +1,543 @@ +From cd3af4fa73ab25353f0865ebe8e0d2af1fd2a50b Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 19 Feb 2019 22:06:59 +0000 +Subject: [PATCH] PCI: brcmstb: Add MSI capability + +This commit adds MSI to the Broadcom STB PCIe host controller. It does +not add MSIX since that functionality is not in the HW. The MSI +controller is physically located within the PCIe block, however, there +is no reason why the MSI controller could not be moved elsewhere in +the future. + +Since the internal Brcmstb MSI controller is intertwined with the PCIe +controller, it is not its own platform device but rather part of the +PCIe platform device. + +Signed-off-by: Jim Quinlan +--- + drivers/pci/controller/pcie-brcmstb.c | 374 ++++++++++++++++++++++++-- + 1 file changed, 353 insertions(+), 21 deletions(-) + +--- a/drivers/pci/controller/pcie-brcmstb.c ++++ b/drivers/pci/controller/pcie-brcmstb.c +@@ -1,6 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0 + /* Copyright (C) 2009 - 2017 Broadcom */ + ++#include + #include + #include + #include +@@ -9,11 +10,13 @@ + #include + #include + #include ++#include + #include + #include + #include + #include + #include ++#include + #include + #include + #include +@@ -47,6 +50,9 @@ + #define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 + #define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 + #define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c ++#define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044 ++#define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048 ++#define PCIE_MISC_MSI_DATA_CONFIG 0x404c + #define PCIE_MISC_PCIE_CTRL 0x4064 + #define PCIE_MISC_PCIE_STATUS 0x4068 + #define PCIE_MISC_REVISION 0x406c +@@ -55,6 +61,7 @@ + #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 + #define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 + #define PCIE_INTR2_CPU_BASE 0x4300 ++#define PCIE_MSI_INTR2_BASE 0x4500 + + /* + * Broadcom Settop Box PCIe Register Field shift and mask info. The +@@ -115,6 +122,8 @@ + + #define BRCM_NUM_PCIE_OUT_WINS 0x4 + #define BRCM_MAX_SCB 0x4 ++#define BRCM_INT_PCI_MSI_NR 32 ++#define BRCM_PCIE_HW_REV_33 0x0303 + + #define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL + #define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL +@@ -203,6 +212,33 @@ struct brcm_window { + dma_addr_t size; + }; + ++struct brcm_msi { ++ struct device *dev; ++ void __iomem *base; ++ struct device_node *dn; ++ struct irq_domain *msi_domain; ++ struct irq_domain *inner_domain; ++ struct mutex lock; /* guards the alloc/free operations */ ++ u64 target_addr; ++ int irq; ++ ++ /* intr_base is the base pointer for interrupt status/set/clr regs */ ++ void __iomem *intr_base; ++ ++ /* intr_legacy_mask indicates how many bits are MSI interrupts */ ++ u32 intr_legacy_mask; ++ ++ /* ++ * intr_legacy_offset indicates bit position of MSI_01. It is ++ * to map the register bit position to a hwirq that starts at 0. ++ */ ++ u32 intr_legacy_offset; ++ ++ /* used indicates which MSI interrupts have been alloc'd */ ++ unsigned long used; ++ unsigned int rev; ++}; ++ + /* Internal PCIe Host Controller Information.*/ + struct brcm_pcie { + struct device *dev; +@@ -217,7 +253,10 @@ struct brcm_pcie { + int num_out_wins; + bool ssc; + int gen; ++ u64 msi_target_addr; + struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS]; ++ struct brcm_msi *msi; ++ bool msi_internal; + unsigned int rev; + const int *reg_offsets; + const int *reg_field_info; +@@ -225,9 +264,9 @@ struct brcm_pcie { + }; + + struct pcie_cfg_data { +- const int *reg_field_info; +- const int *offsets; +- const enum pcie_type type; ++ const int *reg_field_info; ++ const int *offsets; ++ const enum pcie_type type; + }; + + static const int pcie_reg_field_info[] = { +@@ -828,6 +867,267 @@ static void brcm_pcie_set_outbound_win(s + } + } + ++static struct irq_chip brcm_msi_irq_chip = { ++ .name = "Brcm_MSI", ++ .irq_mask = pci_msi_mask_irq, ++ .irq_unmask = pci_msi_unmask_irq, ++}; ++ ++static struct msi_domain_info brcm_msi_domain_info = { ++ .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ++ MSI_FLAG_PCI_MSIX), ++ .chip = &brcm_msi_irq_chip, ++}; ++ ++static void brcm_pcie_msi_isr(struct irq_desc *desc) ++{ ++ struct irq_chip *chip = irq_desc_get_chip(desc); ++ struct brcm_msi *msi; ++ unsigned long status, virq; ++ u32 mask, bit, hwirq; ++ struct device *dev; ++ ++ chained_irq_enter(chip, desc); ++ msi = irq_desc_get_handler_data(desc); ++ mask = msi->intr_legacy_mask; ++ dev = msi->dev; ++ ++ while ((status = bcm_readl(msi->intr_base + STATUS) & mask)) { ++ for_each_set_bit(bit, &status, BRCM_INT_PCI_MSI_NR) { ++ /* clear the interrupt */ ++ bcm_writel(1 << bit, msi->intr_base + CLR); ++ ++ /* Account for legacy interrupt offset */ ++ hwirq = bit - msi->intr_legacy_offset; ++ ++ virq = irq_find_mapping(msi->inner_domain, hwirq); ++ if (virq) { ++ if (msi->used & (1 << hwirq)) ++ generic_handle_irq(virq); ++ else ++ dev_info(dev, "unhandled MSI %d\n", ++ hwirq); ++ } else { ++ /* Unknown MSI, just clear it */ ++ dev_dbg(dev, "unexpected MSI\n"); ++ } ++ } ++ } ++ chained_irq_exit(chip, desc); ++} ++ ++static void brcm_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) ++{ ++ struct brcm_msi *msi = irq_data_get_irq_chip_data(data); ++ u32 temp; ++ ++ msg->address_lo = lower_32_bits(msi->target_addr); ++ msg->address_hi = upper_32_bits(msi->target_addr); ++ temp = bcm_readl(msi->base + PCIE_MISC_MSI_DATA_CONFIG); ++ msg->data = ((temp >> 16) & (temp & 0xffff)) | data->hwirq; ++} ++ ++static int brcm_msi_set_affinity(struct irq_data *irq_data, ++ const struct cpumask *mask, bool force) ++{ ++ return -EINVAL; ++} ++ ++static struct irq_chip brcm_msi_bottom_irq_chip = { ++ .name = "Brcm_MSI", ++ .irq_compose_msi_msg = brcm_compose_msi_msg, ++ .irq_set_affinity = brcm_msi_set_affinity, ++}; ++ ++static int brcm_msi_alloc(struct brcm_msi *msi) ++{ ++ int bit, hwirq; ++ ++ mutex_lock(&msi->lock); ++ bit = ~msi->used ? ffz(msi->used) : -1; ++ ++ if (bit >= 0 && bit < BRCM_INT_PCI_MSI_NR) { ++ msi->used |= (1 << bit); ++ hwirq = bit - msi->intr_legacy_offset; ++ } else { ++ hwirq = -ENOSPC; ++ } ++ ++ mutex_unlock(&msi->lock); ++ return hwirq; ++} ++ ++static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq) ++{ ++ mutex_lock(&msi->lock); ++ msi->used &= ~(1 << (hwirq + msi->intr_legacy_offset)); ++ mutex_unlock(&msi->lock); ++} ++ ++static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, ++ unsigned int nr_irqs, void *args) ++{ ++ struct brcm_msi *msi = domain->host_data; ++ int hwirq; ++ ++ hwirq = brcm_msi_alloc(msi); ++ ++ if (hwirq < 0) ++ return hwirq; ++ ++ irq_domain_set_info(domain, virq, (irq_hw_number_t)hwirq, ++ &brcm_msi_bottom_irq_chip, domain->host_data, ++ handle_simple_irq, NULL, NULL); ++ return 0; ++} ++ ++static void brcm_irq_domain_free(struct irq_domain *domain, ++ unsigned int virq, unsigned int nr_irqs) ++{ ++ struct irq_data *d = irq_domain_get_irq_data(domain, virq); ++ struct brcm_msi *msi = irq_data_get_irq_chip_data(d); ++ ++ brcm_msi_free(msi, d->hwirq); ++} ++ ++static void brcm_msi_set_regs(struct brcm_msi *msi) ++{ ++ u32 data_val, msi_lo, msi_hi; ++ ++ if (msi->rev >= BRCM_PCIE_HW_REV_33) { ++ /* ++ * ffe0 -- least sig 5 bits are 0 indicating 32 msgs ++ * 6540 -- this is our arbitrary unique data value ++ */ ++ data_val = 0xffe06540; ++ } else { ++ /* ++ * fff8 -- least sig 3 bits are 0 indicating 8 msgs ++ * 6540 -- this is our arbitrary unique data value ++ */ ++ data_val = 0xfff86540; ++ } ++ ++ /* ++ * Make sure we are not masking MSIs. Note that MSIs can be masked, ++ * but that occurs on the PCIe EP device ++ */ ++ bcm_writel(0xffffffff & msi->intr_legacy_mask, ++ msi->intr_base + MASK_CLR); ++ ++ msi_lo = lower_32_bits(msi->target_addr); ++ msi_hi = upper_32_bits(msi->target_addr); ++ /* ++ * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI ++ * enable, which we set to 1. ++ */ ++ bcm_writel(msi_lo | 1, msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO); ++ bcm_writel(msi_hi, msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI); ++ bcm_writel(data_val, msi->base + PCIE_MISC_MSI_DATA_CONFIG); ++} ++ ++static const struct irq_domain_ops msi_domain_ops = { ++ .alloc = brcm_irq_domain_alloc, ++ .free = brcm_irq_domain_free, ++}; ++ ++static int brcm_allocate_domains(struct brcm_msi *msi) ++{ ++ struct fwnode_handle *fwnode = of_node_to_fwnode(msi->dn); ++ struct device *dev = msi->dev; ++ ++ msi->inner_domain = irq_domain_add_linear(NULL, BRCM_INT_PCI_MSI_NR, ++ &msi_domain_ops, msi); ++ if (!msi->inner_domain) { ++ dev_err(dev, "failed to create IRQ domain\n"); ++ return -ENOMEM; ++ } ++ ++ msi->msi_domain = pci_msi_create_irq_domain(fwnode, ++ &brcm_msi_domain_info, ++ msi->inner_domain); ++ if (!msi->msi_domain) { ++ dev_err(dev, "failed to create MSI domain\n"); ++ irq_domain_remove(msi->inner_domain); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++static void brcm_free_domains(struct brcm_msi *msi) ++{ ++ irq_domain_remove(msi->msi_domain); ++ irq_domain_remove(msi->inner_domain); ++} ++ ++static void brcm_msi_remove(struct brcm_pcie *pcie) ++{ ++ struct brcm_msi *msi = pcie->msi; ++ ++ if (!msi) ++ return; ++ irq_set_chained_handler(msi->irq, NULL); ++ irq_set_handler_data(msi->irq, NULL); ++ brcm_free_domains(msi); ++} ++ ++static int brcm_pcie_enable_msi(struct brcm_pcie *pcie) ++{ ++ struct brcm_msi *msi; ++ int irq, ret; ++ struct device *dev = pcie->dev; ++ ++ irq = irq_of_parse_and_map(dev->of_node, 1); ++ if (irq <= 0) { ++ dev_err(dev, "cannot map msi intr\n"); ++ return -ENODEV; ++ } ++ ++ msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL); ++ if (!msi) ++ return -ENOMEM; ++ ++ msi->dev = dev; ++ msi->base = pcie->base; ++ msi->rev = pcie->rev; ++ msi->dn = pcie->dn; ++ msi->target_addr = pcie->msi_target_addr; ++ msi->irq = irq; ++ ++ ret = brcm_allocate_domains(msi); ++ if (ret) ++ return ret; ++ ++ irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi); ++ ++ if (msi->rev >= BRCM_PCIE_HW_REV_33) { ++ msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE; ++ /* ++ * This version of PCIe hw has only 32 intr bits ++ * starting at bit position 0. ++ */ ++ msi->intr_legacy_mask = 0xffffffff; ++ msi->intr_legacy_offset = 0x0; ++ msi->used = 0x0; ++ ++ } else { ++ msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE; ++ /* ++ * This version of PCIe hw has only 8 intr bits starting ++ * at bit position 24. ++ */ ++ msi->intr_legacy_mask = 0xff000000; ++ msi->intr_legacy_offset = 24; ++ msi->used = 0x00ffffff; ++ } ++ ++ brcm_msi_set_regs(msi); ++ pcie->msi = msi; ++ ++ return 0; ++} ++ + /* Configuration space read/write support */ + static int cfg_index(int busnr, int devfn, int reg) + { +@@ -1072,6 +1372,7 @@ static int brcm_pcie_setup(struct brcm_p + u16 nlw, cls, lnksta; + bool ssc_good = false; + struct device *dev = pcie->dev; ++ u64 msi_target_addr; + + /* Reset the bridge */ + brcm_pcie_bridge_sw_init_set(pcie, 1); +@@ -1116,27 +1417,24 @@ static int brcm_pcie_setup(struct brcm_p + * The PCIe host controller by design must set the inbound + * viewport to be a contiguous arrangement of all of the + * system's memory. In addition, its size mut be a power of +- * two. To further complicate matters, the viewport must +- * start on a pcie-address that is aligned on a multiple of its +- * size. If a portion of the viewport does not represent +- * system memory -- e.g. 3GB of memory requires a 4GB viewport +- * -- we can map the outbound memory in or after 3GB and even +- * though the viewport will overlap the outbound memory the +- * controller will know to send outbound memory downstream and +- * everything else upstream. ++ * two. Further, the MSI target address must NOT be placed ++ * inside this region, as the decoding logic will consider its ++ * address to be inbound memory traffic. To further ++ * complicate matters, the viewport must start on a ++ * pcie-address that is aligned on a multiple of its size. ++ * If a portion of the viewport does not represent system ++ * memory -- e.g. 3GB of memory requires a 4GB viewport -- ++ * we can map the outbound memory in or after 3GB and even ++ * though the viewport will overlap the outbound memory ++ * the controller will know to send outbound memory downstream ++ * and everything else upstream. + */ + rc_bar2_size = roundup_pow_of_two_64(total_mem_size); + +- /* +- * Set simple configuration based on memory sizes +- * only. We always start the viewport at address 0. +- */ +- rc_bar2_offset = 0; +- + if (dma_ranges) { + /* + * The best-case scenario is to place the inbound +- * region in the first 4GB of pci-space, as some ++ * region in the first 4GB of pcie-space, as some + * legacy devices can only address 32bits. + * We would also like to put the MSI under 4GB + * as well, since some devices require a 32bit +@@ -1145,6 +1443,14 @@ static int brcm_pcie_setup(struct brcm_p + if (total_mem_size <= 0xc0000000ULL && + rc_bar2_size <= 0x100000000ULL) { + rc_bar2_offset = 0; ++ /* If the viewport is less then 4GB we can fit ++ * the MSI target address under 4GB. Otherwise ++ * put it right below 64GB. ++ */ ++ msi_target_addr = ++ (rc_bar2_size == 0x100000000ULL) ++ ? BRCM_MSI_TARGET_ADDR_GT_4GB ++ : BRCM_MSI_TARGET_ADDR_LT_4GB; + } else { + /* + * The system memory is 4GB or larger so we +@@ -1154,8 +1460,12 @@ static int brcm_pcie_setup(struct brcm_p + * start it at the 1x multiple of its size + */ + rc_bar2_offset = rc_bar2_size; +- } + ++ /* Since we are starting the viewport at 4GB or ++ * higher, put the MSI target address below 4GB ++ */ ++ msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; ++ } + } else { + /* + * Set simple configuration based on memory sizes +@@ -1163,7 +1473,12 @@ static int brcm_pcie_setup(struct brcm_p + * and set the MSI target address accordingly. + */ + rc_bar2_offset = 0; ++ ++ msi_target_addr = (rc_bar2_size >= 0x100000000ULL) ++ ? BRCM_MSI_TARGET_ADDR_GT_4GB ++ : BRCM_MSI_TARGET_ADDR_LT_4GB; + } ++ pcie->msi_target_addr = msi_target_addr; + + tmp = lower_32_bits(rc_bar2_offset); + tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE, +@@ -1333,6 +1648,9 @@ static int brcm_pcie_resume(struct devic + if (ret) + return ret; + ++ if (pcie->msi && pcie->msi_internal) ++ brcm_msi_set_regs(pcie->msi); ++ + pcie->suspended = false; + + return 0; +@@ -1340,6 +1658,7 @@ static int brcm_pcie_resume(struct devic + + static void _brcm_pcie_remove(struct brcm_pcie *pcie) + { ++ brcm_msi_remove(pcie); + turn_off(pcie); + clk_disable_unprepare(pcie->clk); + clk_put(pcie->clk); +@@ -1368,7 +1687,7 @@ MODULE_DEVICE_TABLE(of, brcm_pcie_match) + + static int brcm_pcie_probe(struct platform_device *pdev) + { +- struct device_node *dn = pdev->dev.of_node; ++ struct device_node *dn = pdev->dev.of_node, *msi_dn; + const struct of_device_id *of_id; + const struct pcie_cfg_data *data; + int ret; +@@ -1448,6 +1767,20 @@ static int brcm_pcie_probe(struct platfo + if (ret) + goto fail; + ++ msi_dn = of_parse_phandle(pcie->dn, "msi-parent", 0); ++ /* Use the internal MSI if no msi-parent property */ ++ if (!msi_dn) ++ msi_dn = pcie->dn; ++ ++ if (pci_msi_enabled() && msi_dn == pcie->dn) { ++ ret = brcm_pcie_enable_msi(pcie); ++ if (ret) ++ dev_err(pcie->dev, ++ "probe of internal MSI failed: %d)", ret); ++ else ++ pcie->msi_internal = true; ++ } ++ + list_splice_init(&pcie->resources, &bridge->windows); + bridge->dev.parent = &pdev->dev; + bridge->busnr = 0; +@@ -1470,7 +1803,6 @@ static int brcm_pcie_probe(struct platfo + pcie->root_bus = bridge->bus; + + return 0; +- + fail: + _brcm_pcie_remove(pcie); + return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0482-staging-mmal-vchiq-Free-the-event-context-for-contro.patch b/target/linux/brcm2708/patches-4.19/950-0482-staging-mmal-vchiq-Free-the-event-context-for-contro.patch deleted file mode 100644 index f3cf64b554..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0482-staging-mmal-vchiq-Free-the-event-context-for-contro.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 6737574b4d3af54a56d2f9c49f516fb75d06a556 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 1 May 2019 13:27:23 +0100 -Subject: [PATCH 482/806] staging: mmal-vchiq: Free the event context for - control ports - -vchiq_mmal_component_init calls init_event_context for the -control port, but vchiq_mmal_component_finalise didn't free -it, causing a memory leak.. - -Add the free call. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -1982,6 +1982,8 @@ int vchiq_mmal_component_finalise(struct - for (idx = 0; idx < component->clocks; idx++) - free_event_context(&component->clock[idx]); - -+ free_event_context(&component->control); -+ - mutex_unlock(&instance->vchiq_mutex); - - return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0483-BCM270X_DT-Also-set-coherent_pool-1M-for-BT-Pis.patch b/target/linux/brcm2708/patches-4.19/950-0483-BCM270X_DT-Also-set-coherent_pool-1M-for-BT-Pis.patch deleted file mode 100644 index 7808301963..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0483-BCM270X_DT-Also-set-coherent_pool-1M-for-BT-Pis.patch +++ /dev/null @@ -1,47 +0,0 @@ -From f9c0f8057ffee5c039fe20c3e2dcd7fea70222e9 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 2 May 2019 22:14:34 +0100 -Subject: [PATCH 483/806] BCM270X_DT: Also set coherent_pool=1M for BT Pis - -See: https://github.com/raspberrypi/linux/issues/2924 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 2 +- - arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 2 +- - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 2 +- - 3 files changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts -@@ -8,7 +8,7 @@ - model = "Raspberry Pi Zero W"; - - chosen { -- bootargs = "8250.nr_uarts=1"; -+ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; - }; - - aliases { ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -@@ -9,7 +9,7 @@ - model = "Raspberry Pi 3 Model B+"; - - chosen { -- bootargs = "8250.nr_uarts=1"; -+ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; - }; - - aliases { ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -9,7 +9,7 @@ - model = "Raspberry Pi 3 Model B"; - - chosen { -- bootargs = "8250.nr_uarts=1"; -+ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; - }; - - aliases { diff --git a/target/linux/brcm2708/patches-4.19/950-0483-dt-bindings-pci-Add-DT-docs-for-Brcmstb-PCIe-device.patch b/target/linux/brcm2708/patches-4.19/950-0483-dt-bindings-pci-Add-DT-docs-for-Brcmstb-PCIe-device.patch new file mode 100644 index 0000000000..632e986e50 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0483-dt-bindings-pci-Add-DT-docs-for-Brcmstb-PCIe-device.patch @@ -0,0 +1,77 @@ +From cb1acabb459677efbf95c54ce1dc5252be30a018 Mon Sep 17 00:00:00 2001 +From: Jim Quinlan +Date: Mon, 15 Jan 2018 18:28:39 -0500 +Subject: [PATCH] dt-bindings: pci: Add DT docs for Brcmstb PCIe device + +The DT bindings description of the Brcmstb PCIe device is described. This +node can be used by almost all Broadcom settop box chips, using +ARM, ARM64, or MIPS CPU architectures. + +Signed-off-by: Jim Quinlan +--- + .../devicetree/bindings/pci/brcmstb-pcie.txt | 59 +++++++++++++++++++ + 1 file changed, 59 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pci/brcmstb-pcie.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pci/brcmstb-pcie.txt +@@ -0,0 +1,59 @@ ++Brcmstb PCIe Host Controller Device Tree Bindings ++ ++Required Properties: ++- compatible ++ "brcm,bcm7425-pcie" -- for 7425 family MIPS-based SOCs. ++ "brcm,bcm7435-pcie" -- for 7435 family MIPS-based SOCs. ++ "brcm,bcm7445-pcie" -- for 7445 and later ARM based SOCs (not including ++ the 7278). ++ "brcm,bcm7278-pcie" -- for 7278 family ARM-based SOCs. ++ ++- reg -- the register start address and length for the PCIe reg block. ++- interrupts -- two interrupts are specified; the first interrupt is for ++ the PCI host controller and the second is for MSI if the built-in ++ MSI controller is to be used. ++- interrupt-names -- names of the interrupts (above): "pcie" and "msi". ++- #address-cells -- set to <3>. ++- #size-cells -- set to <2>. ++- #interrupt-cells: set to <1>. ++- interrupt-map-mask and interrupt-map, standard PCI properties to define the ++ mapping of the PCIe interface to interrupt numbers. ++- ranges: ranges for the PCI memory and I/O regions. ++- linux,pci-domain -- should be unique per host controller. ++ ++Optional Properties: ++- clocks -- phandle of pcie clock. ++- clock-names -- set to "sw_pcie" if clocks is used. ++- dma-ranges -- Specifies the inbound memory mapping regions when ++ an "identity map" is not possible. ++- msi-controller -- this property is typically specified to have the ++ PCIe controller use its internal MSI controller. ++- msi-parent -- set to use an external MSI interrupt controller. ++- brcm,enable-ssc -- (boolean) indicates usage of spread-spectrum clocking. ++- max-link-speed -- (integer) indicates desired generation of link: ++ 1 => 2.5 Gbps (gen1), 2 => 5.0 Gbps (gen2), 3 => 8.0 Gbps (gen3). ++ ++Example Node: ++ ++pcie0: pcie@f0460000 { ++ reg = <0x0 0xf0460000 0x0 0x9310>; ++ interrupts = <0x0 0x0 0x4>; ++ compatible = "brcm,bcm7445-pcie"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ranges = <0x02000000 0x00000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x08000000 ++ 0x02000000 0x00000000 0x08000000 0x00000000 0xc8000000 0x00000000 0x08000000>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0 0 0 1 &intc 0 47 3 ++ 0 0 0 2 &intc 0 48 3 ++ 0 0 0 3 &intc 0 49 3 ++ 0 0 0 4 &intc 0 50 3>; ++ clocks = <&sw_pcie0>; ++ clock-names = "sw_pcie"; ++ msi-parent = <&pcie0>; /* use PCIe's internal MSI controller */ ++ msi-controller; /* use PCIe's internal MSI controller */ ++ brcm,ssc; ++ max-link-speed = <1>; ++ linux,pci-domain = <0>; ++ }; diff --git a/target/linux/brcm2708/patches-4.19/950-0484-pcie-brcmstb-Changes-for-BCM2711.patch b/target/linux/brcm2708/patches-4.19/950-0484-pcie-brcmstb-Changes-for-BCM2711.patch new file mode 100644 index 0000000000..b44ec4c4e2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0484-pcie-brcmstb-Changes-for-BCM2711.patch @@ -0,0 +1,1411 @@ +From 545951be6cabac8b1df85771c44335a0eaaa3c5d Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 19 Feb 2019 22:06:59 +0000 +Subject: [PATCH] pcie-brcmstb: Changes for BCM2711 + +The initial brcmstb PCIe driver - originally taken from the V3(?) +patch set - has been modified significantly for the BCM2711. + +Signed-off-by: Phil Elwell +--- + drivers/dma/bcm2835-dma.c | 107 ++++ + drivers/pci/controller/Makefile | 4 + + drivers/pci/controller/pcie-brcmstb-bounce.c | 564 +++++++++++++++++++ + drivers/pci/controller/pcie-brcmstb-bounce.h | 32 ++ + drivers/pci/controller/pcie-brcmstb.c | 237 ++++---- + drivers/soc/bcm/brcmstb/Makefile | 2 +- + drivers/soc/bcm/brcmstb/memory.c | 158 ++++++ + 7 files changed, 996 insertions(+), 108 deletions(-) + create mode 100644 drivers/pci/controller/pcie-brcmstb-bounce.c + create mode 100644 drivers/pci/controller/pcie-brcmstb-bounce.h + create mode 100644 drivers/soc/bcm/brcmstb/memory.c + +--- a/drivers/dma/bcm2835-dma.c ++++ b/drivers/dma/bcm2835-dma.c +@@ -68,6 +68,17 @@ struct bcm2835_dma_cb { + uint32_t pad[2]; + }; + ++struct bcm2838_dma40_scb { ++ uint32_t ti; ++ uint32_t src; ++ uint32_t srci; ++ uint32_t dst; ++ uint32_t dsti; ++ uint32_t len; ++ uint32_t next_cb; ++ uint32_t rsvd; ++}; ++ + struct bcm2835_cb_entry { + struct bcm2835_dma_cb *cb; + dma_addr_t paddr; +@@ -185,6 +196,45 @@ struct bcm2835_desc { + #define MAX_DMA_LEN SZ_1G + #define MAX_LITE_DMA_LEN (SZ_64K - 4) + ++/* 40-bit DMA support */ ++#define BCM2838_DMA40_CS 0x00 ++#define BCM2838_DMA40_CB 0x04 ++#define BCM2838_DMA40_DEBUG 0x0c ++#define BCM2858_DMA40_TI 0x10 ++#define BCM2838_DMA40_SRC 0x14 ++#define BCM2838_DMA40_SRCI 0x18 ++#define BCM2838_DMA40_DEST 0x1c ++#define BCM2838_DMA40_DESTI 0x20 ++#define BCM2838_DMA40_LEN 0x24 ++#define BCM2838_DMA40_NEXT_CB 0x28 ++#define BCM2838_DMA40_DEBUG2 0x2c ++ ++#define BCM2838_DMA40_CS_ACTIVE BIT(0) ++#define BCM2838_DMA40_CS_END BIT(1) ++ ++#define BCM2838_DMA40_CS_QOS(x) (((x) & 0x1f) << 16) ++#define BCM2838_DMA40_CS_PANIC_QOS(x) (((x) & 0x1f) << 20) ++#define BCM2838_DMA40_CS_WRITE_WAIT BIT(28) ++ ++#define BCM2838_DMA40_BURST_LEN(x) ((((x) - 1) & 0xf) << 8) ++#define BCM2838_DMA40_INC BIT(12) ++#define BCM2838_DMA40_SIZE_128 (2 << 13) ++ ++#define BCM2838_DMA40_MEMCPY_QOS \ ++ (BCM2838_DMA40_CS_QOS(0x0) | \ ++ BCM2838_DMA40_CS_PANIC_QOS(0x0) | \ ++ BCM2838_DMA40_CS_WRITE_WAIT) ++ ++#define BCM2838_DMA40_MEMCPY_XFER_INFO \ ++ (BCM2838_DMA40_SIZE_128 | \ ++ BCM2838_DMA40_INC | \ ++ BCM2838_DMA40_BURST_LEN(16)) ++ ++static void __iomem *memcpy_chan; ++static struct bcm2838_dma40_scb *memcpy_scb; ++static dma_addr_t memcpy_scb_dma; ++DEFINE_SPINLOCK(memcpy_lock); ++ + static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c) + { + /* lite and normal channels have different max frame length */ +@@ -868,6 +918,56 @@ static void bcm2835_dma_free(struct bcm2 + } + } + ++int bcm2838_dma40_memcpy_init(struct device *dev) ++{ ++ if (memcpy_scb) ++ return 0; ++ ++ memcpy_scb = dma_alloc_coherent(dev, sizeof(*memcpy_scb), ++ &memcpy_scb_dma, GFP_KERNEL); ++ ++ if (!memcpy_scb) { ++ pr_err("bcm2838_dma40_memcpy_init failed!\n"); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcm2838_dma40_memcpy_init); ++ ++void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size) ++{ ++ struct bcm2838_dma40_scb *scb = memcpy_scb; ++ unsigned long flags; ++ ++ if (!scb) { ++ pr_err("bcm2838_dma40_memcpy not initialised!\n"); ++ return; ++ } ++ ++ spin_lock_irqsave(&memcpy_lock, flags); ++ ++ scb->ti = 0; ++ scb->src = lower_32_bits(src); ++ scb->srci = upper_32_bits(src) | BCM2838_DMA40_MEMCPY_XFER_INFO; ++ scb->dst = lower_32_bits(dst); ++ scb->dsti = upper_32_bits(dst) | BCM2838_DMA40_MEMCPY_XFER_INFO; ++ scb->len = size; ++ scb->next_cb = 0; ++ ++ writel((u32)(memcpy_scb_dma >> 5), memcpy_chan + BCM2838_DMA40_CB); ++ writel(BCM2838_DMA40_MEMCPY_QOS + BCM2838_DMA40_CS_ACTIVE, ++ memcpy_chan + BCM2838_DMA40_CS); ++ /* Poll for completion */ ++ while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_CS_END)) ++ cpu_relax(); ++ ++ writel(BCM2838_DMA40_CS_END, memcpy_chan + BCM2838_DMA40_CS); ++ ++ spin_unlock_irqrestore(&memcpy_lock, flags); ++} ++EXPORT_SYMBOL(bcm2838_dma40_memcpy); ++ + static const struct of_device_id bcm2835_dma_of_match[] = { + { .compatible = "brcm,bcm2835-dma", }, + {}, +@@ -966,6 +1066,13 @@ static int bcm2835_dma_probe(struct plat + /* Channel 0 is used by the legacy API */ + chans_available &= ~BCM2835_DMA_BULK_MASK; + ++ /* We can't use channels 11-13 yet */ ++ chans_available &= ~(BIT(11) | BIT(12) | BIT(13)); ++ ++ /* Grab channel 14 for the 40-bit DMA memcpy */ ++ chans_available &= ~BIT(14); ++ memcpy_chan = BCM2835_DMA_CHANIO(base, 14); ++ + /* get irqs for each channel that we support */ + for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { + /* skip masked out channels */ +--- a/drivers/pci/controller/Makefile ++++ b/drivers/pci/controller/Makefile +@@ -29,6 +29,10 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-medi + obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o + obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o + obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o ++ifdef CONFIG_ARM ++obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb-bounce.o ++endif ++ + obj-$(CONFIG_VMD) += vmd.o + # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW + obj-y += dwc/ +--- /dev/null ++++ b/drivers/pci/controller/pcie-brcmstb-bounce.c +@@ -0,0 +1,564 @@ ++/* ++ * This code started out as a version of arch/arm/common/dmabounce.c, ++ * modified to cope with highmem pages. Now it has been changed heavily - ++ * it now preallocates a large block (currently 4MB) and carves it up ++ * sequentially in ring fashion, and DMA is used to copy the data - to the ++ * point where very little of the original remains. ++ * ++ * Copyright (C) 2019 Raspberry Pi (Trading) Ltd. ++ * ++ * Original version by Brad Parker (brad@heeltoe.com) ++ * Re-written by Christopher Hoover ++ * Made generic by Deepak Saxena ++ * ++ * Copyright (C) 2002 Hewlett Packard Company. ++ * Copyright (C) 2004 MontaVista Software, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define STATS ++ ++#ifdef STATS ++#define DO_STATS(X) do { X ; } while (0) ++#else ++#define DO_STATS(X) do { } while (0) ++#endif ++ ++/* ************************************************** */ ++ ++struct safe_buffer { ++ struct list_head node; ++ ++ /* original request */ ++ size_t size; ++ int direction; ++ ++ struct dmabounce_pool *pool; ++ void *safe; ++ dma_addr_t unsafe_dma_addr; ++ dma_addr_t safe_dma_addr; ++}; ++ ++struct dmabounce_pool { ++ unsigned long pages; ++ void *virt_addr; ++ dma_addr_t dma_addr; ++ unsigned long *alloc_map; ++ unsigned long alloc_pos; ++ spinlock_t lock; ++ struct device *dev; ++ unsigned long num_pages; ++#ifdef STATS ++ size_t max_size; ++ unsigned long num_bufs; ++ unsigned long max_bufs; ++ unsigned long max_pages; ++#endif ++}; ++ ++struct dmabounce_device_info { ++ struct device *dev; ++ dma_addr_t threshold; ++ struct list_head safe_buffers; ++ struct dmabounce_pool pool; ++ rwlock_t lock; ++#ifdef STATS ++ unsigned long map_count; ++ unsigned long unmap_count; ++ unsigned long sync_dev_count; ++ unsigned long sync_cpu_count; ++ unsigned long fail_count; ++ int attr_res; ++#endif ++}; ++ ++static struct dmabounce_device_info *g_dmabounce_device_info; ++ ++extern int bcm2838_dma40_memcpy_init(struct device *dev); ++extern void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size); ++ ++#ifdef STATS ++static ssize_t ++bounce_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ struct dmabounce_device_info *device_info = g_dmabounce_device_info; ++ return sprintf(buf, "m:%lu/%lu s:%lu/%lu f:%lu s:%zu b:%lu/%lu a:%lu/%lu\n", ++ device_info->map_count, ++ device_info->unmap_count, ++ device_info->sync_dev_count, ++ device_info->sync_cpu_count, ++ device_info->fail_count, ++ device_info->pool.max_size, ++ device_info->pool.num_bufs, ++ device_info->pool.max_bufs, ++ device_info->pool.num_pages * PAGE_SIZE, ++ device_info->pool.max_pages * PAGE_SIZE); ++} ++ ++static DEVICE_ATTR(dmabounce_stats, 0444, bounce_show, NULL); ++#endif ++ ++static int bounce_create(struct dmabounce_pool *pool, struct device *dev, ++ unsigned long buffer_size) ++{ ++ int ret = -ENOMEM; ++ pool->pages = (buffer_size + PAGE_SIZE - 1)/PAGE_SIZE; ++ pool->alloc_map = bitmap_zalloc(pool->pages, GFP_KERNEL); ++ if (!pool->alloc_map) ++ goto err_bitmap; ++ pool->virt_addr = dma_alloc_coherent(dev, pool->pages * PAGE_SIZE, ++ &pool->dma_addr, GFP_KERNEL); ++ if (!pool->virt_addr) ++ goto err_dmabuf; ++ ++ pool->alloc_pos = 0; ++ spin_lock_init(&pool->lock); ++ pool->dev = dev; ++ pool->num_pages = 0; ++ ++ DO_STATS(pool->max_size = 0); ++ DO_STATS(pool->num_bufs = 0); ++ DO_STATS(pool->max_bufs = 0); ++ DO_STATS(pool->max_pages = 0); ++ ++ return 0; ++ ++err_dmabuf: ++ bitmap_free(pool->alloc_map); ++err_bitmap: ++ return ret; ++} ++ ++static void bounce_destroy(struct dmabounce_pool *pool) ++{ ++ dma_free_coherent(pool->dev, pool->pages * PAGE_SIZE, pool->virt_addr, ++ pool->dma_addr); ++ ++ bitmap_free(pool->alloc_map); ++} ++ ++static void *bounce_alloc(struct dmabounce_pool *pool, size_t size, ++ dma_addr_t *dmaaddrp) ++{ ++ unsigned long pages; ++ unsigned long flags; ++ unsigned long pos; ++ ++ pages = (size + PAGE_SIZE - 1)/PAGE_SIZE; ++ ++ DO_STATS(pool->max_size = max(size, pool->max_size)); ++ ++ spin_lock_irqsave(&pool->lock, flags); ++ pos = bitmap_find_next_zero_area(pool->alloc_map, pool->pages, ++ pool->alloc_pos, pages, 0); ++ /* If not found, try from the start */ ++ if (pos >= pool->pages && pool->alloc_pos) ++ pos = bitmap_find_next_zero_area(pool->alloc_map, pool->pages, ++ 0, pages, 0); ++ ++ if (pos >= pool->pages) { ++ spin_unlock_irqrestore(&pool->lock, flags); ++ return NULL; ++ } ++ ++ bitmap_set(pool->alloc_map, pos, pages); ++ pool->alloc_pos = (pos + pages) % pool->pages; ++ pool->num_pages += pages; ++ ++ DO_STATS(pool->num_bufs++); ++ DO_STATS(pool->max_bufs = max(pool->num_bufs, pool->max_bufs)); ++ DO_STATS(pool->max_pages = max(pool->num_pages, pool->max_pages)); ++ ++ spin_unlock_irqrestore(&pool->lock, flags); ++ ++ *dmaaddrp = pool->dma_addr + pos * PAGE_SIZE; ++ ++ return pool->virt_addr + pos * PAGE_SIZE; ++} ++ ++static void ++bounce_free(struct dmabounce_pool *pool, void *buf, size_t size) ++{ ++ unsigned long pages; ++ unsigned long flags; ++ unsigned long pos; ++ ++ pages = (size + PAGE_SIZE - 1)/PAGE_SIZE; ++ pos = (buf - pool->virt_addr)/PAGE_SIZE; ++ ++ BUG_ON((buf - pool->virt_addr) & (PAGE_SIZE - 1)); ++ ++ spin_lock_irqsave(&pool->lock, flags); ++ bitmap_clear(pool->alloc_map, pos, pages); ++ pool->num_pages -= pages; ++ if (pool->num_pages == 0) ++ pool->alloc_pos = 0; ++ DO_STATS(pool->num_bufs--); ++ spin_unlock_irqrestore(&pool->lock, flags); ++} ++ ++/* allocate a 'safe' buffer and keep track of it */ ++static struct safe_buffer * ++alloc_safe_buffer(struct dmabounce_device_info *device_info, ++ dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) ++{ ++ struct safe_buffer *buf; ++ struct dmabounce_pool *pool = &device_info->pool; ++ struct device *dev = device_info->dev; ++ unsigned long flags; ++ ++ /* ++ * Although one might expect this to be called in thread context, ++ * using GFP_KERNEL here leads to hard-to-debug lockups. in_atomic() ++ * was previously used to select the appropriate allocation mode, ++ * but this is unsafe. ++ */ ++ buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC); ++ if (!buf) { ++ dev_warn(dev, "%s: kmalloc failed\n", __func__); ++ return NULL; ++ } ++ ++ buf->unsafe_dma_addr = dma_addr; ++ buf->size = size; ++ buf->direction = dir; ++ buf->pool = pool; ++ ++ buf->safe = bounce_alloc(pool, size, &buf->safe_dma_addr); ++ ++ if (!buf->safe) { ++ dev_warn(dev, ++ "%s: could not alloc dma memory (size=%d)\n", ++ __func__, size); ++ kfree(buf); ++ return NULL; ++ } ++ ++ write_lock_irqsave(&device_info->lock, flags); ++ list_add(&buf->node, &device_info->safe_buffers); ++ write_unlock_irqrestore(&device_info->lock, flags); ++ ++ return buf; ++} ++ ++/* determine if a buffer is from our "safe" pool */ ++static struct safe_buffer * ++find_safe_buffer(struct dmabounce_device_info *device_info, ++ dma_addr_t safe_dma_addr) ++{ ++ struct safe_buffer *b, *rb = NULL; ++ unsigned long flags; ++ ++ read_lock_irqsave(&device_info->lock, flags); ++ ++ list_for_each_entry(b, &device_info->safe_buffers, node) ++ if (b->safe_dma_addr <= safe_dma_addr && ++ b->safe_dma_addr + b->size > safe_dma_addr) { ++ rb = b; ++ break; ++ } ++ ++ read_unlock_irqrestore(&device_info->lock, flags); ++ return rb; ++} ++ ++static void ++free_safe_buffer(struct dmabounce_device_info *device_info, ++ struct safe_buffer *buf) ++{ ++ unsigned long flags; ++ ++ write_lock_irqsave(&device_info->lock, flags); ++ list_del(&buf->node); ++ write_unlock_irqrestore(&device_info->lock, flags); ++ ++ bounce_free(buf->pool, buf->safe, buf->size); ++ ++ kfree(buf); ++} ++ ++/* ************************************************** */ ++ ++static struct safe_buffer * ++find_safe_buffer_dev(struct device *dev, dma_addr_t dma_addr, const char *where) ++{ ++ if (!dev || !g_dmabounce_device_info) ++ return NULL; ++ if (dma_mapping_error(dev, dma_addr)) { ++ dev_err(dev, "Trying to %s invalid mapping\n", where); ++ return NULL; ++ } ++ return find_safe_buffer(g_dmabounce_device_info, dma_addr); ++} ++ ++static dma_addr_t ++map_single(struct device *dev, struct safe_buffer *buf, size_t size, ++ enum dma_data_direction dir, unsigned long attrs) ++{ ++ BUG_ON(buf->size != size); ++ BUG_ON(buf->direction != dir); ++ ++ dev_dbg(dev, "map: %llx->%llx\n", (u64)buf->unsafe_dma_addr, ++ (u64)buf->safe_dma_addr); ++ ++ if ((dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) && ++ !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) ++ bcm2838_dma40_memcpy(buf->safe_dma_addr, buf->unsafe_dma_addr, ++ size); ++ ++ return buf->safe_dma_addr; ++} ++ ++static dma_addr_t ++unmap_single(struct device *dev, struct safe_buffer *buf, size_t size, ++ enum dma_data_direction dir, unsigned long attrs) ++{ ++ BUG_ON(buf->size != size); ++ BUG_ON(buf->direction != dir); ++ ++ if ((dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) && ++ !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) { ++ dev_dbg(dev, "unmap: %llx->%llx\n", (u64)buf->safe_dma_addr, ++ (u64)buf->unsafe_dma_addr); ++ ++ bcm2838_dma40_memcpy(buf->unsafe_dma_addr, buf->safe_dma_addr, ++ size); ++ } ++ return buf->unsafe_dma_addr; ++} ++ ++/* ************************************************** */ ++ ++/* ++ * see if a buffer address is in an 'unsafe' range. if it is ++ * allocate a 'safe' buffer and copy the unsafe buffer into it. ++ * substitute the safe buffer for the unsafe one. ++ * (basically move the buffer from an unsafe area to a safe one) ++ */ ++static dma_addr_t ++dmabounce_map_page(struct device *dev, struct page *page, unsigned long offset, ++ size_t size, enum dma_data_direction dir, ++ unsigned long attrs) ++{ ++ struct dmabounce_device_info *device_info = g_dmabounce_device_info; ++ dma_addr_t dma_addr; ++ ++ dma_addr = pfn_to_dma(dev, page_to_pfn(page)) + offset; ++ ++ arm_dma_ops.sync_single_for_device(dev, dma_addr, size, dir); ++ ++ if (device_info && (dma_addr + size) > device_info->threshold) { ++ struct safe_buffer *buf; ++ ++ buf = alloc_safe_buffer(device_info, dma_addr, size, dir); ++ if (!buf) { ++ DO_STATS(device_info->fail_count++); ++ return ARM_MAPPING_ERROR; ++ } ++ ++ DO_STATS(device_info->map_count++); ++ ++ dma_addr = map_single(dev, buf, size, dir, attrs); ++ } ++ ++ return dma_addr; ++} ++ ++/* ++ * see if a mapped address was really a "safe" buffer and if so, copy ++ * the data from the safe buffer back to the unsafe buffer and free up ++ * the safe buffer. (basically return things back to the way they ++ * should be) ++ */ ++static void ++dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, ++ enum dma_data_direction dir, unsigned long attrs) ++{ ++ struct safe_buffer *buf; ++ ++ buf = find_safe_buffer_dev(dev, dma_addr, __func__); ++ if (buf) { ++ DO_STATS(g_dmabounce_device_info->unmap_count++); ++ dma_addr = unmap_single(dev, buf, size, dir, attrs); ++ free_safe_buffer(g_dmabounce_device_info, buf); ++ } ++ ++ arm_dma_ops.sync_single_for_cpu(dev, dma_addr, size, dir); ++} ++ ++/* ++ * A version of dmabounce_map_page that assumes the mapping has already ++ * been created - intended for streaming operation. ++ */ ++static void ++dmabounce_sync_for_device(struct device *dev, dma_addr_t dma_addr, size_t size, ++ enum dma_data_direction dir) ++{ ++ struct safe_buffer *buf; ++ ++ arm_dma_ops.sync_single_for_device(dev, dma_addr, size, dir); ++ ++ buf = find_safe_buffer_dev(dev, dma_addr, __func__); ++ if (buf) { ++ DO_STATS(g_dmabounce_device_info->sync_dev_count++); ++ map_single(dev, buf, size, dir, 0); ++ } ++} ++ ++/* ++ * A version of dmabounce_unmap_page that doesn't destroy the mapping - ++ * intended for streaming operation. ++ */ ++static void ++dmabounce_sync_for_cpu(struct device *dev, dma_addr_t dma_addr, ++ size_t size, enum dma_data_direction dir) ++{ ++ struct safe_buffer *buf; ++ ++ buf = find_safe_buffer_dev(dev, dma_addr, __func__); ++ if (buf) { ++ DO_STATS(g_dmabounce_device_info->sync_cpu_count++); ++ dma_addr = unmap_single(dev, buf, size, dir, 0); ++ } ++ ++ arm_dma_ops.sync_single_for_cpu(dev, dma_addr, size, dir); ++} ++ ++static int dmabounce_dma_supported(struct device *dev, u64 dma_mask) ++{ ++ if (g_dmabounce_device_info) ++ return 0; ++ ++ return arm_dma_ops.dma_supported(dev, dma_mask); ++} ++ ++static int dmabounce_mapping_error(struct device *dev, dma_addr_t dma_addr) ++{ ++ return arm_dma_ops.mapping_error(dev, dma_addr); ++} ++ ++static const struct dma_map_ops dmabounce_ops = { ++ .alloc = arm_dma_alloc, ++ .free = arm_dma_free, ++ .mmap = arm_dma_mmap, ++ .get_sgtable = arm_dma_get_sgtable, ++ .map_page = dmabounce_map_page, ++ .unmap_page = dmabounce_unmap_page, ++ .sync_single_for_cpu = dmabounce_sync_for_cpu, ++ .sync_single_for_device = dmabounce_sync_for_device, ++ .map_sg = arm_dma_map_sg, ++ .unmap_sg = arm_dma_unmap_sg, ++ .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu, ++ .sync_sg_for_device = arm_dma_sync_sg_for_device, ++ .dma_supported = dmabounce_dma_supported, ++ .mapping_error = dmabounce_mapping_error, ++}; ++ ++int brcm_pcie_bounce_register_dev(struct device *dev, ++ unsigned long buffer_size, ++ dma_addr_t threshold) ++{ ++ struct dmabounce_device_info *device_info; ++ int ret; ++ ++ /* Only support a single client */ ++ if (g_dmabounce_device_info) ++ return -EBUSY; ++ ++ ret = bcm2838_dma40_memcpy_init(dev); ++ if (ret) ++ return ret; ++ ++ device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC); ++ if (!device_info) { ++ dev_err(dev, ++ "Could not allocated dmabounce_device_info\n"); ++ return -ENOMEM; ++ } ++ ++ ret = bounce_create(&device_info->pool, dev, buffer_size); ++ if (ret) { ++ dev_err(dev, ++ "dmabounce: could not allocate %ld byte DMA pool\n", ++ buffer_size); ++ goto err_bounce; ++ } ++ ++ device_info->dev = dev; ++ device_info->threshold = threshold; ++ INIT_LIST_HEAD(&device_info->safe_buffers); ++ rwlock_init(&device_info->lock); ++ ++ DO_STATS(device_info->map_count = 0); ++ DO_STATS(device_info->unmap_count = 0); ++ DO_STATS(device_info->sync_dev_count = 0); ++ DO_STATS(device_info->sync_cpu_count = 0); ++ DO_STATS(device_info->fail_count = 0); ++ DO_STATS(device_info->attr_res = ++ device_create_file(dev, &dev_attr_dmabounce_stats)); ++ ++ g_dmabounce_device_info = device_info; ++ set_dma_ops(dev, &dmabounce_ops); ++ ++ dev_info(dev, "dmabounce: registered device - %ld kB, threshold %pad\n", ++ buffer_size / 1024, &threshold); ++ ++ return 0; ++ ++ err_bounce: ++ kfree(device_info); ++ return ret; ++} ++EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); ++ ++void brcm_pcie_bounce_unregister_dev(struct device *dev) ++{ ++ struct dmabounce_device_info *device_info = g_dmabounce_device_info; ++ ++ g_dmabounce_device_info = NULL; ++ set_dma_ops(dev, NULL); ++ ++ if (!device_info) { ++ dev_warn(dev, ++ "Never registered with dmabounce but attempting" ++ "to unregister!\n"); ++ return; ++ } ++ ++ if (!list_empty(&device_info->safe_buffers)) { ++ dev_err(dev, ++ "Removing from dmabounce with pending buffers!\n"); ++ BUG(); ++ } ++ ++ bounce_destroy(&device_info->pool); ++ ++ DO_STATS(if (device_info->attr_res == 0) ++ device_remove_file(dev, &dev_attr_dmabounce_stats)); ++ ++ kfree(device_info); ++ ++ dev_info(dev, "dmabounce: device unregistered\n"); ++} ++EXPORT_SYMBOL(brcm_pcie_bounce_unregister_dev); ++ ++MODULE_AUTHOR("Phil Elwell "); ++MODULE_DESCRIPTION("Dedicate DMA bounce support for pcie-brcmstb"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/pci/controller/pcie-brcmstb-bounce.h +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Copyright (C) 2019 Raspberry Pi (Trading) Ltd. ++ */ ++ ++#ifndef _PCIE_BRCMSTB_BOUNCE_H ++#define _PCIE_BRCMSTB_BOUNCE_H ++ ++#ifdef CONFIG_ARM ++ ++int brcm_pcie_bounce_register_dev(struct device *dev, unsigned long buffer_size, ++ dma_addr_t threshold); ++ ++int brcm_pcie_bounce_unregister_dev(struct device *dev); ++ ++#else ++ ++static inline int brcm_pcie_bounce_register_dev(struct device *dev, ++ unsigned long buffer_size, ++ dma_addr_t threshold) ++{ ++ return 0; ++} ++ ++static inline int brcm_pcie_bounce_unregister_dev(struct device *dev) ++{ ++ return 0; ++} ++ ++#endif ++ ++#endif /* _PCIE_BRCMSTB_BOUNCE_H */ +--- a/drivers/pci/controller/pcie-brcmstb.c ++++ b/drivers/pci/controller/pcie-brcmstb.c +@@ -29,6 +29,7 @@ + #include + #include + #include "../pci.h" ++#include "pcie-brcmstb-bounce.h" + + /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ + #define BRCM_PCIE_CAP_REGS 0x00ac +@@ -53,6 +54,7 @@ + #define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044 + #define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048 + #define PCIE_MISC_MSI_DATA_CONFIG 0x404c ++#define PCIE_MISC_EOI_CTRL 0x4060 + #define PCIE_MISC_PCIE_CTRL 0x4064 + #define PCIE_MISC_PCIE_STATUS 0x4068 + #define PCIE_MISC_REVISION 0x406c +@@ -260,12 +262,14 @@ struct brcm_pcie { + unsigned int rev; + const int *reg_offsets; + const int *reg_field_info; ++ u32 max_burst_size; + enum pcie_type type; + }; + + struct pcie_cfg_data { + const int *reg_field_info; + const int *offsets; ++ const u32 max_burst_size; + const enum pcie_type type; + }; + +@@ -288,24 +292,27 @@ static const int pcie_offset_bcm7425[] = + static const struct pcie_cfg_data bcm7425_cfg = { + .reg_field_info = pcie_reg_field_info, + .offsets = pcie_offset_bcm7425, ++ .max_burst_size = BURST_SIZE_256, + .type = BCM7425, + }; + + static const int pcie_offsets[] = { + [RGR1_SW_INIT_1] = 0x9210, + [EXT_CFG_INDEX] = 0x9000, +- [EXT_CFG_DATA] = 0x9004, ++ [EXT_CFG_DATA] = 0x8000, + }; + + static const struct pcie_cfg_data bcm7435_cfg = { + .reg_field_info = pcie_reg_field_info, + .offsets = pcie_offsets, ++ .max_burst_size = BURST_SIZE_256, + .type = BCM7435, + }; + + static const struct pcie_cfg_data generic_cfg = { + .reg_field_info = pcie_reg_field_info, + .offsets = pcie_offsets, ++ .max_burst_size = BURST_SIZE_128, // before BURST_SIZE_512 + .type = GENERIC, + }; + +@@ -318,6 +325,7 @@ static const int pcie_offset_bcm7278[] = + static const struct pcie_cfg_data bcm7278_cfg = { + .reg_field_info = pcie_reg_field_info_bcm7278, + .offsets = pcie_offset_bcm7278, ++ .max_burst_size = BURST_SIZE_512, + .type = BCM7278, + }; + +@@ -360,7 +368,6 @@ static struct pci_ops brcm_pcie_ops = { + (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT))) + + static const struct dma_map_ops *arch_dma_ops; +-static const struct dma_map_ops *brcm_dma_ops_ptr; + static struct of_pci_range *dma_ranges; + static int num_dma_ranges; + +@@ -369,6 +376,16 @@ static int num_memc; + static int num_pcie; + static DEFINE_MUTEX(brcm_pcie_lock); + ++static unsigned int bounce_buffer = 32*1024*1024; ++module_param(bounce_buffer, uint, 0644); ++MODULE_PARM_DESC(bounce_buffer, "Size of bounce buffer"); ++ ++static unsigned int bounce_threshold = 0xc0000000; ++module_param(bounce_threshold, uint, 0644); ++MODULE_PARM_DESC(bounce_threshold, "Bounce threshold"); ++ ++static struct brcm_pcie *g_pcie; ++ + static dma_addr_t brcm_to_pci(dma_addr_t addr) + { + struct of_pci_range *p; +@@ -457,12 +474,10 @@ static int brcm_map_sg(struct device *de + struct scatterlist *sg; + + for_each_sg(sgl, sg, nents, i) { +-#ifdef CONFIG_NEED_SG_DMA_LENGTH +- sg->dma_length = sg->length; +-#endif ++ sg_dma_len(sg) = sg->length; + sg->dma_address = +- brcm_dma_ops_ptr->map_page(dev, sg_page(sg), sg->offset, +- sg->length, dir, attrs); ++ brcm_map_page(dev, sg_page(sg), sg->offset, ++ sg->length, dir, attrs); + if (dma_mapping_error(dev, sg->dma_address)) + goto bad_mapping; + } +@@ -470,8 +485,8 @@ static int brcm_map_sg(struct device *de + + bad_mapping: + for_each_sg(sgl, sg, i, j) +- brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg), +- sg_dma_len(sg), dir, attrs); ++ brcm_unmap_page(dev, sg_dma_address(sg), ++ sg_dma_len(sg), dir, attrs); + return 0; + } + +@@ -484,8 +499,8 @@ static void brcm_unmap_sg(struct device + struct scatterlist *sg; + + for_each_sg(sgl, sg, nents, i) +- brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg), +- sg_dma_len(sg), dir, attrs); ++ brcm_unmap_page(dev, sg_dma_address(sg), ++ sg_dma_len(sg), dir, attrs); + } + + static void brcm_sync_single_for_cpu(struct device *dev, +@@ -531,8 +546,8 @@ void brcm_sync_sg_for_cpu(struct device + int i; + + for_each_sg(sgl, sg, nents, i) +- brcm_dma_ops_ptr->sync_single_for_cpu(dev, sg_dma_address(sg), +- sg->length, dir); ++ brcm_sync_single_for_cpu(dev, sg_dma_address(sg), ++ sg->length, dir); + } + + void brcm_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, +@@ -542,9 +557,9 @@ void brcm_sync_sg_for_device(struct devi + int i; + + for_each_sg(sgl, sg, nents, i) +- brcm_dma_ops_ptr->sync_single_for_device(dev, +- sg_dma_address(sg), +- sg->length, dir); ++ brcm_sync_single_for_device(dev, ++ sg_dma_address(sg), ++ sg->length, dir); + } + + static int brcm_mapping_error(struct device *dev, dma_addr_t dma_addr) +@@ -633,17 +648,47 @@ static void brcm_set_dma_ops(struct devi + set_dma_ops(dev, &brcm_dma_ops); + } + ++static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, ++ unsigned int val); + static int brcmstb_platform_notifier(struct notifier_block *nb, + unsigned long event, void *__dev) + { ++ extern unsigned long max_pfn; + struct device *dev = __dev; ++ const char *rc_name = "0000:00:00.0"; + +- brcm_dma_ops_ptr = &brcm_dma_ops; +- if (event != BUS_NOTIFY_ADD_DEVICE) +- return NOTIFY_DONE; ++ switch (event) { ++ case BUS_NOTIFY_ADD_DEVICE: ++ if (max_pfn > (bounce_threshold/PAGE_SIZE) && ++ strcmp(dev->kobj.name, rc_name)) { ++ int ret; ++ ++ ret = brcm_pcie_bounce_register_dev(dev, bounce_buffer, ++ (dma_addr_t)bounce_threshold); ++ if (ret) { ++ dev_err(dev, ++ "brcm_pcie_bounce_register_dev() failed: %d\n", ++ ret); ++ return ret; ++ } ++ } ++ brcm_set_dma_ops(dev); ++ return NOTIFY_OK; ++ ++ case BUS_NOTIFY_DEL_DEVICE: ++ if (!strcmp(dev->kobj.name, rc_name) && g_pcie) { ++ /* Force a bus reset */ ++ brcm_pcie_perst_set(g_pcie, 1); ++ msleep(100); ++ brcm_pcie_perst_set(g_pcie, 0); ++ } else if (max_pfn > (bounce_threshold/PAGE_SIZE)) { ++ brcm_pcie_bounce_unregister_dev(dev); ++ } ++ return NOTIFY_OK; + +- brcm_set_dma_ops(dev); +- return NOTIFY_OK; ++ default: ++ return NOTIFY_DONE; ++ } + } + + static struct notifier_block brcmstb_platform_nb = { +@@ -914,6 +959,7 @@ static void brcm_pcie_msi_isr(struct irq + } + } + chained_irq_exit(chip, desc); ++ bcm_writel(1, msi->base + PCIE_MISC_EOI_CTRL); + } + + static void brcm_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) +@@ -930,7 +976,8 @@ static void brcm_compose_msi_msg(struct + static int brcm_msi_set_affinity(struct irq_data *irq_data, + const struct cpumask *mask, bool force) + { +- return -EINVAL; ++ struct brcm_msi *msi = irq_data_get_irq_chip_data(irq_data); ++ return __irq_set_affinity(msi->irq, mask, force); + } + + static struct irq_chip brcm_msi_bottom_irq_chip = { +@@ -1168,9 +1215,9 @@ static void __iomem *brcm_pcie_map_conf( + return PCI_SLOT(devfn) ? NULL : base + where; + + /* For devices, write to the config space index register */ +- idx = cfg_index(bus->number, devfn, where); ++ idx = cfg_index(bus->number, devfn, 0); + bcm_writel(idx, pcie->base + IDX_ADDR(pcie)); +- return base + DATA_ADDR(pcie) + (where & 0x3); ++ return base + DATA_ADDR(pcie) + where; + } + + static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, +@@ -1238,20 +1285,6 @@ static int brcm_pcie_parse_map_dma_range + num_dma_ranges++; + } + +- for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { +- u64 size = brcmstb_memory_memc_size(i); +- +- if (size == (u64)-1) { +- dev_err(pcie->dev, "cannot get memc%d size", i); +- return -EINVAL; +- } else if (size) { +- scb_size[i] = roundup_pow_of_two_64(size); +- num_memc++; +- } else { +- break; +- } +- } +- + return 0; + } + +@@ -1275,26 +1308,25 @@ static int brcm_pcie_add_controller(stru + if (ret) + goto done; + +- /* Determine num_memc and their sizes */ +- for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { +- u64 size = brcmstb_memory_memc_size(i); +- +- if (size == (u64)-1) { +- dev_err(dev, "cannot get memc%d size\n", i); +- ret = -EINVAL; +- goto done; +- } else if (size) { +- scb_size[i] = roundup_pow_of_two_64(size); +- num_memc++; +- } else { +- break; ++ if (!num_dma_ranges) { ++ /* Determine num_memc and their sizes by other means */ ++ for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { ++ u64 size = brcmstb_memory_memc_size(i); ++ ++ if (size == (u64)-1) { ++ dev_err(dev, "cannot get memc%d size\n", i); ++ ret = -EINVAL; ++ goto done; ++ } else if (size) { ++ scb_size[i] = roundup_pow_of_two_64(size); ++ } else { ++ break; ++ } + } +- } +- if (!ret && num_memc == 0) { +- ret = -EINVAL; +- goto done; ++ num_memc = i; + } + ++ g_pcie = pcie; + num_pcie++; + done: + mutex_unlock(&brcm_pcie_lock); +@@ -1307,6 +1339,7 @@ static void brcm_pcie_remove_controller( + if (--num_pcie > 0) + goto out; + ++ g_pcie = NULL; + if (brcm_unregister_notifier()) + dev_err(pcie->dev, "failed to unregister pci bus notifier\n"); + kfree(dma_ranges); +@@ -1367,7 +1400,7 @@ static int brcm_pcie_setup(struct brcm_p + void __iomem *base = pcie->base; + unsigned int scb_size_val; + u64 rc_bar2_offset, rc_bar2_size, total_mem_size = 0; +- u32 tmp, burst; ++ u32 tmp; + int i, j, ret, limit; + u16 nlw, cls, lnksta; + bool ssc_good = false; +@@ -1400,20 +1433,15 @@ static int brcm_pcie_setup(struct brcm_p + /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */ + tmp = INSERT_FIELD(0, PCIE_MISC_MISC_CTRL, SCB_ACCESS_EN, 1); + tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, CFG_READ_UR_MODE, 1); +- burst = (pcie->type == GENERIC || pcie->type == BCM7278) +- ? BURST_SIZE_512 : BURST_SIZE_256; +- tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE, burst); ++ tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE, ++ pcie->max_burst_size); + bcm_writel(tmp, base + PCIE_MISC_MISC_CTRL); + + /* + * Set up inbound memory view for the EP (called RC_BAR2, + * not to be confused with the BARs that are advertised by + * the EP). +- */ +- for (i = 0; i < num_memc; i++) +- total_mem_size += scb_size[i]; +- +- /* ++ * + * The PCIe host controller by design must set the inbound + * viewport to be a contiguous arrangement of all of the + * system's memory. In addition, its size mut be a power of +@@ -1429,55 +1457,49 @@ static int brcm_pcie_setup(struct brcm_p + * the controller will know to send outbound memory downstream + * and everything else upstream. + */ +- rc_bar2_size = roundup_pow_of_two_64(total_mem_size); + +- if (dma_ranges) { ++ if (num_dma_ranges) { + /* +- * The best-case scenario is to place the inbound +- * region in the first 4GB of pcie-space, as some +- * legacy devices can only address 32bits. +- * We would also like to put the MSI under 4GB +- * as well, since some devices require a 32bit +- * MSI target address. ++ * Use the base address and size(s) provided in the dma-ranges ++ * property. + */ +- if (total_mem_size <= 0xc0000000ULL && +- rc_bar2_size <= 0x100000000ULL) { +- rc_bar2_offset = 0; +- /* If the viewport is less then 4GB we can fit +- * the MSI target address under 4GB. Otherwise +- * put it right below 64GB. +- */ +- msi_target_addr = +- (rc_bar2_size == 0x100000000ULL) +- ? BRCM_MSI_TARGET_ADDR_GT_4GB +- : BRCM_MSI_TARGET_ADDR_LT_4GB; +- } else { +- /* +- * The system memory is 4GB or larger so we +- * cannot start the inbound region at location +- * 0 (since we have to allow some space for +- * outbound memory @ 3GB). So instead we +- * start it at the 1x multiple of its size +- */ +- rc_bar2_offset = rc_bar2_size; +- +- /* Since we are starting the viewport at 4GB or +- * higher, put the MSI target address below 4GB +- */ +- msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; +- } +- } else { ++ for (i = 0; i < num_dma_ranges; i++) ++ scb_size[i] = roundup_pow_of_two_64(dma_ranges[i].size); ++ ++ num_memc = num_dma_ranges; ++ rc_bar2_offset = dma_ranges[0].pci_addr; ++ } else if (num_memc) { + /* + * Set simple configuration based on memory sizes +- * only. We always start the viewport at address 0, +- * and set the MSI target address accordingly. ++ * only. We always start the viewport at address 0. + */ + rc_bar2_offset = 0; ++ } else { ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < num_memc; i++) ++ total_mem_size += scb_size[i]; ++ ++ rc_bar2_size = roundup_pow_of_two_64(total_mem_size); + +- msi_target_addr = (rc_bar2_size >= 0x100000000ULL) +- ? BRCM_MSI_TARGET_ADDR_GT_4GB +- : BRCM_MSI_TARGET_ADDR_LT_4GB; ++ /* Verify the alignment is correct */ ++ if (rc_bar2_offset & (rc_bar2_size - 1)) { ++ dev_err(dev, "inbound window is misaligned\n"); ++ return -EINVAL; + } ++ ++ /* ++ * Position the MSI target low if possible. ++ * ++ * TO DO: Consider outbound window when choosing MSI target and ++ * verifying configuration. ++ */ ++ msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; ++ if (rc_bar2_offset <= msi_target_addr && ++ rc_bar2_offset + rc_bar2_size > msi_target_addr) ++ msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB; ++ + pcie->msi_target_addr = msi_target_addr; + + tmp = lower_32_bits(rc_bar2_offset); +@@ -1713,6 +1735,7 @@ static int brcm_pcie_probe(struct platfo + data = of_id->data; + pcie->reg_offsets = data->offsets; + pcie->reg_field_info = data->reg_field_info; ++ pcie->max_burst_size = data->max_burst_size; + pcie->type = data->type; + pcie->dn = dn; + pcie->dev = &pdev->dev; +@@ -1732,7 +1755,7 @@ static int brcm_pcie_probe(struct platfo + + pcie->clk = of_clk_get_by_name(dn, "sw_pcie"); + if (IS_ERR(pcie->clk)) { +- dev_err(&pdev->dev, "could not get clock\n"); ++ dev_warn(&pdev->dev, "could not get clock\n"); + pcie->clk = NULL; + } + pcie->base = base; +@@ -1755,7 +1778,8 @@ static int brcm_pcie_probe(struct platfo + + ret = clk_prepare_enable(pcie->clk); + if (ret) { +- dev_err(&pdev->dev, "could not enable clock\n"); ++ if (ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, "could not enable clock\n"); + return ret; + } + +@@ -1818,7 +1842,6 @@ static struct platform_driver brcm_pcie_ + .remove = brcm_pcie_remove, + .driver = { + .name = "brcm-pcie", +- .owner = THIS_MODULE, + .of_match_table = brcm_pcie_match, + .pm = &brcm_pcie_pm_ops, + }, +--- a/drivers/soc/bcm/brcmstb/Makefile ++++ b/drivers/soc/bcm/brcmstb/Makefile +@@ -1,2 +1,2 @@ +-obj-y += common.o biuctrl.o ++obj-y += common.o biuctrl.o memory.o + obj-$(CONFIG_BRCMSTB_PM) += pm/ +--- /dev/null ++++ b/drivers/soc/bcm/brcmstb/memory.c +@@ -0,0 +1,158 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* Copyright © 2015-2017 Broadcom */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Macro to help extract property data */ ++#define DT_PROP_DATA_TO_U32(b, offs) (fdt32_to_cpu(*(u32 *)(b + offs))) ++ ++/* Constants used when retrieving memc info */ ++#define NUM_BUS_RANGES 10 ++#define BUS_RANGE_ULIMIT_SHIFT 4 ++#define BUS_RANGE_LLIMIT_SHIFT 4 ++#define BUS_RANGE_PA_SHIFT 12 ++ ++enum { ++ BUSNUM_MCP0 = 0x4, ++ BUSNUM_MCP1 = 0x5, ++ BUSNUM_MCP2 = 0x6, ++}; ++ ++/* ++ * If the DT nodes are handy, determine which MEMC holds the specified ++ * physical address. ++ */ ++#ifdef CONFIG_ARCH_BRCMSTB ++int __brcmstb_memory_phys_addr_to_memc(phys_addr_t pa, void __iomem *base) ++{ ++ int memc = -1; ++ int i; ++ ++ for (i = 0; i < NUM_BUS_RANGES; i++, base += 8) { ++ const u64 ulimit_raw = readl(base); ++ const u64 llimit_raw = readl(base + 4); ++ const u64 ulimit = ++ ((ulimit_raw >> BUS_RANGE_ULIMIT_SHIFT) ++ << BUS_RANGE_PA_SHIFT) | 0xfff; ++ const u64 llimit = (llimit_raw >> BUS_RANGE_LLIMIT_SHIFT) ++ << BUS_RANGE_PA_SHIFT; ++ const u32 busnum = (u32)(ulimit_raw & 0xf); ++ ++ if (pa >= llimit && pa <= ulimit) { ++ if (busnum >= BUSNUM_MCP0 && busnum <= BUSNUM_MCP2) { ++ memc = busnum - BUSNUM_MCP0; ++ break; ++ } ++ } ++ } ++ ++ return memc; ++} ++ ++int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa) ++{ ++ int memc = -1; ++ struct device_node *np; ++ void __iomem *cpubiuctrl; ++ ++ np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl"); ++ if (!np) ++ return memc; ++ ++ cpubiuctrl = of_iomap(np, 0); ++ if (!cpubiuctrl) ++ goto cleanup; ++ ++ memc = __brcmstb_memory_phys_addr_to_memc(pa, cpubiuctrl); ++ iounmap(cpubiuctrl); ++ ++cleanup: ++ of_node_put(np); ++ ++ return memc; ++} ++ ++#elif defined(CONFIG_MIPS) ++int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa) ++{ ++ /* The logic here is fairly simple and hardcoded: if pa <= 0x5000_0000, ++ * then this is MEMC0, else MEMC1. ++ * ++ * For systems with 2GB on MEMC0, MEMC1 starts at 9000_0000, with 1GB ++ * on MEMC0, MEMC1 starts at 6000_0000. ++ */ ++ if (pa >= 0x50000000ULL) ++ return 1; ++ else ++ return 0; ++} ++#endif ++ ++u64 brcmstb_memory_memc_size(int memc) ++{ ++ const void *fdt = initial_boot_params; ++ const int mem_offset = fdt_path_offset(fdt, "/memory"); ++ int addr_cells = 1, size_cells = 1; ++ const struct fdt_property *prop; ++ int proplen, cellslen; ++ u64 memc_size = 0; ++ int i; ++ ++ /* Get root size and address cells if specified */ ++ prop = fdt_get_property(fdt, 0, "#size-cells", &proplen); ++ if (prop) ++ size_cells = DT_PROP_DATA_TO_U32(prop->data, 0); ++ ++ prop = fdt_get_property(fdt, 0, "#address-cells", &proplen); ++ if (prop) ++ addr_cells = DT_PROP_DATA_TO_U32(prop->data, 0); ++ ++ if (mem_offset < 0) ++ return -1; ++ ++ prop = fdt_get_property(fdt, mem_offset, "reg", &proplen); ++ cellslen = (int)sizeof(u32) * (addr_cells + size_cells); ++ if ((proplen % cellslen) != 0) ++ return -1; ++ ++ for (i = 0; i < proplen / cellslen; ++i) { ++ u64 addr = 0; ++ u64 size = 0; ++ int memc_idx; ++ int j; ++ ++ for (j = 0; j < addr_cells; ++j) { ++ int offset = (cellslen * i) + (sizeof(u32) * j); ++ ++ addr |= (u64)DT_PROP_DATA_TO_U32(prop->data, offset) << ++ ((addr_cells - j - 1) * 32); ++ } ++ for (j = 0; j < size_cells; ++j) { ++ int offset = (cellslen * i) + ++ (sizeof(u32) * (j + addr_cells)); ++ ++ size |= (u64)DT_PROP_DATA_TO_U32(prop->data, offset) << ++ ((size_cells - j - 1) * 32); ++ } ++ ++ if ((phys_addr_t)addr != addr) { ++ pr_err("phys_addr_t is smaller than provided address 0x%llx!\n", ++ addr); ++ return -1; ++ } ++ ++ memc_idx = brcmstb_memory_phys_addr_to_memc((phys_addr_t)addr); ++ if (memc_idx == memc) ++ memc_size += size; ++ } ++ ++ return memc_size; ++} ++EXPORT_SYMBOL_GPL(brcmstb_memory_memc_size); ++ diff --git a/target/linux/brcm2708/patches-4.19/950-0485-arm-bcm2835-DMA-can-only-address-1GB.patch b/target/linux/brcm2708/patches-4.19/950-0485-arm-bcm2835-DMA-can-only-address-1GB.patch new file mode 100644 index 0000000000..89919c1d79 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0485-arm-bcm2835-DMA-can-only-address-1GB.patch @@ -0,0 +1,25 @@ +From 9334afe7293b3a78b7e070a70880b2db7aa98365 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 29 May 2019 15:47:42 +0100 +Subject: [PATCH] arm: bcm2835: DMA can only address 1GB + +The legacy peripherals can only address the first gigabyte of RAM, so +ensure that DMA allocations are restricted to that region. + +Signed-off-by: Phil Elwell +--- + arch/arm/mach-bcm/board_bcm2835.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/arm/mach-bcm/board_bcm2835.c ++++ b/arch/arm/mach-bcm/board_bcm2835.c +@@ -123,6 +123,9 @@ static const char * const bcm2835_compat + }; + + DT_MACHINE_START(BCM2835, "BCM2835") ++#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) ++ .dma_zone_size = SZ_1G, ++#endif + .map_io = bcm2835_map_io, + .init_machine = bcm2835_init, + .dt_compat = bcm2835_compat, diff --git a/target/linux/brcm2708/patches-4.19/950-0485-arm-dts-overlays-rpi-sense-add-upstream-humidity-com.patch b/target/linux/brcm2708/patches-4.19/950-0485-arm-dts-overlays-rpi-sense-add-upstream-humidity-com.patch deleted file mode 100644 index ced476fa69..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0485-arm-dts-overlays-rpi-sense-add-upstream-humidity-com.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 50d3f15ea5d6ca2705a009722dd7d4108c9f75d9 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Sun, 5 May 2019 21:07:12 +0100 -Subject: [PATCH 485/806] arm: dts: overlays: rpi-sense: add upstream humidity - compatible - -The upstream humidiity driver uses "st,hts221" for the compatible -string so add that in as well so it will work with an unmodified -upstream kernel driver. We leave the downstream as the priority. - -Signed-off-by: Peter Robinson ---- - arch/arm/boot/dts/overlays/rpi-sense-overlay.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts -@@ -38,7 +38,7 @@ - }; - - hts221-humid@5f { -- compatible = "st,hts221-humid"; -+ compatible = "st,hts221-humid", "st,hts221"; - reg = <0x5f>; - status = "okay"; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0486-mmc-bcm2835-sdhost-Support-64-bit-physical-addresses.patch b/target/linux/brcm2708/patches-4.19/950-0486-mmc-bcm2835-sdhost-Support-64-bit-physical-addresses.patch new file mode 100644 index 0000000000..a2aeeea2dd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0486-mmc-bcm2835-sdhost-Support-64-bit-physical-addresses.patch @@ -0,0 +1,56 @@ +From 8a58288d710a817b5dc7747f0bec1fb167368e7e Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 29 Aug 2018 09:05:15 +0100 +Subject: [PATCH] mmc: bcm2835-sdhost: Support 64-bit physical + addresses + +Signed-off-by: Phil Elwell +--- + drivers/mmc/host/bcm2835-sdhost.c | 10 ++++++---- + 1 file changed, 6 insertions(+), 4 deletions(-) + +--- a/drivers/mmc/host/bcm2835-sdhost.c ++++ b/drivers/mmc/host/bcm2835-sdhost.c +@@ -148,7 +148,7 @@ struct bcm2835_host { + spinlock_t lock; + + void __iomem *ioaddr; +- u32 bus_addr; ++ phys_addr_t bus_addr; + + struct mmc_host *mmc; + +@@ -246,8 +246,8 @@ static void log_init(struct device *dev, + sdhost_log_buf = dma_zalloc_coherent(dev, LOG_SIZE, &sdhost_log_addr, + GFP_KERNEL); + if (sdhost_log_buf) { +- pr_info("sdhost: log_buf @ %p (%x)\n", +- sdhost_log_buf, (u32)sdhost_log_addr); ++ pr_info("sdhost: log_buf @ %p (%llx)\n", ++ sdhost_log_buf, (u64)sdhost_log_addr); + timer_base = ioremap_nocache(bus_to_phys + 0x7e003000, SZ_4K); + if (!timer_base) + pr_err("sdhost: failed to remap timer\n"); +@@ -2024,6 +2024,7 @@ static int bcm2835_sdhost_probe(struct p + struct mmc_host *mmc; + const __be32 *addr; + u32 msg[3]; ++ int na; + int ret; + + pr_debug("bcm2835_sdhost_probe\n"); +@@ -2047,12 +2048,13 @@ static int bcm2835_sdhost_probe(struct p + goto err; + } + ++ na = of_n_addr_cells(node); + addr = of_get_address(node, 0, NULL, NULL); + if (!addr) { + dev_err(dev, "could not get DMA-register address\n"); + return -ENODEV; + } +- host->bus_addr = be32_to_cpup(addr); ++ host->bus_addr = (phys_addr_t)of_read_number(addr, na); + pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", + (unsigned long)host->ioaddr, + (unsigned long)iomem->start, diff --git a/target/linux/brcm2708/patches-4.19/950-0486-staging-mmal-vchiq-Fix-memory-leak-in-error-path.patch b/target/linux/brcm2708/patches-4.19/950-0486-staging-mmal-vchiq-Fix-memory-leak-in-error-path.patch deleted file mode 100644 index d973c56985..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0486-staging-mmal-vchiq-Fix-memory-leak-in-error-path.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 250db0df9643d122e00313313102c642f1adac72 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 2 May 2019 15:50:01 +0100 -Subject: [PATCH 486/806] staging: mmal-vchiq: Fix memory leak in error path - -On error, vchiq_mmal_component_init could leave the -event context allocated for ports. -Clean them up in the error path. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/vchiq-mmal/mmal-vchiq.c | 27 +++++++++++++------ - 1 file changed, 19 insertions(+), 8 deletions(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -1848,9 +1848,26 @@ static void free_event_context(struct vc - { - struct mmal_msg_context *ctx = port->event_context; - -+ if (!ctx) -+ return; -+ - kfree(ctx->u.bulk.buffer->buffer); - kfree(ctx->u.bulk.buffer); - release_msg_context(ctx); -+ port->event_context = NULL; -+} -+ -+static void release_all_event_contexts(struct vchiq_mmal_component *component) -+{ -+ int idx; -+ -+ for (idx = 0; idx < component->inputs; idx++) -+ free_event_context(&component->input[idx]); -+ for (idx = 0; idx < component->outputs; idx++) -+ free_event_context(&component->output[idx]); -+ for (idx = 0; idx < component->clocks; idx++) -+ free_event_context(&component->clock[idx]); -+ free_event_context(&component->control); - } - - /* Initialise a mmal component and its ports -@@ -1948,6 +1965,7 @@ int vchiq_mmal_component_init(struct vch - - release_component: - destroy_component(instance, component); -+ release_all_event_contexts(component); - unlock: - if (component) - component->in_use = 0; -@@ -1975,14 +1993,7 @@ int vchiq_mmal_component_finalise(struct - - component->in_use = 0; - -- for (idx = 0; idx < component->inputs; idx++) -- free_event_context(&component->input[idx]); -- for (idx = 0; idx < component->outputs; idx++) -- free_event_context(&component->output[idx]); -- for (idx = 0; idx < component->clocks; idx++) -- free_event_context(&component->clock[idx]); -- -- free_event_context(&component->control); -+ release_all_event_contexts(component); - - mutex_unlock(&instance->vchiq_mutex); - diff --git a/target/linux/brcm2708/patches-4.19/950-0487-mmc-sdhci-Mask-spurious-interrupts.patch b/target/linux/brcm2708/patches-4.19/950-0487-mmc-sdhci-Mask-spurious-interrupts.patch new file mode 100644 index 0000000000..1aa0a17965 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0487-mmc-sdhci-Mask-spurious-interrupts.patch @@ -0,0 +1,29 @@ +From be309b7db77215610d5ac15bf0aacd47ea5b3433 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 28 Sep 2018 16:24:05 +0100 +Subject: [PATCH] mmc: sdhci: Mask "spurious" interrupts + +Add a filter for "spurious" Transfer Complete interrupts, attempting +to make it as specific as possible: +* INT_DATA_END (transfer complete) is set +* There is a stop command in progress +* There is no data transfer in progress + +Signed-off-by: Phil Elwell +--- + drivers/mmc/host/sdhci.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/mmc/host/sdhci.c ++++ b/drivers/mmc/host/sdhci.c +@@ -2937,6 +2937,10 @@ static irqreturn_t sdhci_irq(int irq, vo + result = IRQ_WAKE_THREAD; + } + ++ if ((intmask & SDHCI_INT_DATA_END) && !host->data && ++ host->cmd && (host->cmd == host->cmd->mrq->stop)) ++ intmask &= ~SDHCI_INT_DATA_END; ++ + if (intmask & SDHCI_INT_CMD_MASK) + sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK, &intmask); + diff --git a/target/linux/brcm2708/patches-4.19/950-0487-staging-vchiq-mmal-Fix-memory-leak-of-vchiq-instance.patch b/target/linux/brcm2708/patches-4.19/950-0487-staging-vchiq-mmal-Fix-memory-leak-of-vchiq-instance.patch deleted file mode 100644 index e354ddb6ba..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0487-staging-vchiq-mmal-Fix-memory-leak-of-vchiq-instance.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 3e246d402582c6f19e5e636f89952d11e18e6442 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 3 May 2019 13:27:51 +0100 -Subject: [PATCH 487/806] staging: vchiq-mmal: Fix memory leak of vchiq - instance - -The vchiq instance was allocated from vchiq_mmal_init via -vchi_initialise, but was never released with vchi_disconnect. - -Retain the handle and release it from vchiq_mmal_finalise. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c -@@ -176,6 +176,7 @@ struct mmal_msg_context { - }; - - struct vchiq_mmal_instance { -+ VCHI_INSTANCE_T vchi_instance; - VCHI_SERVICE_HANDLE_T handle; - - /* ensure serialised access to service */ -@@ -1981,7 +1982,7 @@ EXPORT_SYMBOL_GPL(vchiq_mmal_component_i - int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, - struct vchiq_mmal_component *component) - { -- int ret, idx; -+ int ret; - - if (mutex_lock_interruptible(&instance->vchiq_mutex)) - return -EINTR; -@@ -2094,6 +2095,8 @@ int vchiq_mmal_finalise(struct vchiq_mma - - idr_destroy(&instance->context_map); - -+ vchi_disconnect(instance->vchi_instance); -+ - kfree(instance); - - return status; -@@ -2105,7 +2108,7 @@ int vchiq_mmal_init(struct vchiq_mmal_in - int status; - struct vchiq_mmal_instance *instance; - static VCHI_CONNECTION_T *vchi_connection; -- static VCHI_INSTANCE_T vchi_instance; -+ VCHI_INSTANCE_T vchi_instance; - SERVICE_CREATION_T params = { - .version = VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER), - .service_id = VC_MMAL_SERVER_NAME, -@@ -2151,6 +2154,8 @@ int vchiq_mmal_init(struct vchiq_mmal_in - if (!instance) - return -ENOMEM; - -+ instance->vchi_instance = vchi_instance; -+ - mutex_init(&instance->vchiq_mutex); - - instance->bulk_scratch = vmalloc(PAGE_SIZE); diff --git a/target/linux/brcm2708/patches-4.19/950-0488-Revert-video-bcm2708_fb-Try-allocating-on-the-ARM-an.patch b/target/linux/brcm2708/patches-4.19/950-0488-Revert-video-bcm2708_fb-Try-allocating-on-the-ARM-an.patch deleted file mode 100644 index 924e863a45..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0488-Revert-video-bcm2708_fb-Try-allocating-on-the-ARM-an.patch +++ /dev/null @@ -1,164 +0,0 @@ -From 71a27bf49d7a64959b7e60d780a1f899ead34f5f Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 13 May 2019 17:34:29 +0100 -Subject: [PATCH 488/806] Revert "video: bcm2708_fb: Try allocating on the ARM - and passing to VPU" - -This reverts commit ca36c709fce57e8023d2b8b354376bf161601a49. - -The driver tries a cma_alloc to avoid using gpu_mem, but should -that fail the core code is logging an error with no easy way to -test whether it will succeed or fail first. - -Revert until we either totally give up on gpu_mem and increase -CMA always, or find a way to try an allocation. - -Signed-off-by: Dave Stevenson ---- - drivers/video/fbdev/bcm2708_fb.c | 102 +++------------------ - include/soc/bcm2835/raspberrypi-firmware.h | 1 - - 2 files changed, 12 insertions(+), 91 deletions(-) - ---- a/drivers/video/fbdev/bcm2708_fb.c -+++ b/drivers/video/fbdev/bcm2708_fb.c -@@ -98,11 +98,6 @@ struct bcm2708_fb { - struct bcm2708_fb_stats stats; - unsigned long fb_bus_address; - struct { u32 base, length; } gpu; -- -- bool disable_arm_alloc; -- unsigned int image_size; -- dma_addr_t dma_addr; -- void *cpuaddr; - }; - - #define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) -@@ -288,88 +283,23 @@ static int bcm2708_fb_set_par(struct fb_ - .xoffset = info->var.xoffset, - .yoffset = info->var.yoffset, - .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, -- /* base and screen_size will be initialised later */ -- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, -- /* pitch will be initialised later */ -+ .base = 0, -+ .screen_size = 0, -+ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, -+ .pitch = 0, - }; -- int ret, image_size; -- -+ int ret; - - print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", __func__, info, - info->var.xres, info->var.yres, info->var.xres_virtual, - info->var.yres_virtual, (int)info->screen_size, - info->var.bits_per_pixel); - -- /* Try allocating our own buffer. We can specify all the parameters */ -- image_size = ((info->var.xres * info->var.yres) * -- info->var.bits_per_pixel) >> 3; -- -- if (!fb->disable_arm_alloc && -- (image_size != fb->image_size || !fb->dma_addr)) { -- if (fb->dma_addr) { -- dma_free_coherent(info->device, fb->image_size, -- fb->cpuaddr, fb->dma_addr); -- fb->image_size = 0; -- fb->cpuaddr = NULL; -- fb->dma_addr = 0; -- } -- -- fb->cpuaddr = dma_alloc_coherent(info->device, image_size, -- &fb->dma_addr, GFP_KERNEL); -- -- if (!fb->cpuaddr) { -- fb->dma_addr = 0; -- fb->disable_arm_alloc = true; -- } else { -- fb->image_size = image_size; -- } -- } -- -- if (fb->cpuaddr) { -- fbinfo.base = fb->dma_addr; -- fbinfo.screen_size = image_size; -- fbinfo.pitch = (info->var.xres * info->var.bits_per_pixel) >> 3; -- -- ret = rpi_firmware_property_list(fb->fw, &fbinfo, -- sizeof(fbinfo)); -- if (ret || fbinfo.base != fb->dma_addr) { -- /* Firmware either failed, or assigned a different base -- * address (ie it doesn't support being passed an FB -- * allocation). -- * Destroy the allocation, and don't try again. -- */ -- dma_free_coherent(info->device, fb->image_size, -- fb->cpuaddr, fb->dma_addr); -- fb->image_size = 0; -- fb->cpuaddr = NULL; -- fb->dma_addr = 0; -- fb->disable_arm_alloc = true; -- } -- } else { -- /* Our allocation failed - drop into the old scheme of -- * allocation by the VPU. -- */ -- ret = -ENOMEM; -- } -- -+ ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); - if (ret) { -- /* Old scheme: -- * - FRAMEBUFFER_ALLOCATE passes 0 for base and screen_size. -- * - GET_PITCH instead of SET_PITCH. -- */ -- fbinfo.base = 0; -- fbinfo.screen_size = 0; -- fbinfo.tag6.tag = RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH; -- fbinfo.pitch = 0; -- -- ret = rpi_firmware_property_list(fb->fw, &fbinfo, -- sizeof(fbinfo)); -- if (ret) { -- dev_err(info->device, -- "Failed to allocate GPU framebuffer (%d)\n", -- ret); -- return ret; -- } -+ dev_err(info->device, -+ "Failed to allocate GPU framebuffer (%d)\n", ret); -+ return ret; - } - - if (info->var.bits_per_pixel <= 8) -@@ -384,17 +314,9 @@ static int bcm2708_fb_set_par(struct fb_ - fb->fb.fix.smem_start = fbinfo.base; - fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; - fb->fb.screen_size = fbinfo.screen_size; -- -- if (!fb->dma_addr) { -- if (fb->fb.screen_base) -- iounmap(fb->fb.screen_base); -- -- fb->fb.screen_base = ioremap_wc(fbinfo.base, -- fb->fb.screen_size); -- } else { -- fb->fb.screen_base = fb->cpuaddr; -- } -- -+ if (fb->fb.screen_base) -+ iounmap(fb->fb.screen_base); -+ fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); - if (!fb->fb.screen_base) { - /* the console may currently be locked */ - console_trylock(); ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -128,7 +128,6 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, - RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, - RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, -- RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, - RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, - RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, - RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, diff --git a/target/linux/brcm2708/patches-4.19/950-0488-mmc-sdhci-iproc-Add-support-for-emmc2-of-the-BCM2838.patch b/target/linux/brcm2708/patches-4.19/950-0488-mmc-sdhci-iproc-Add-support-for-emmc2-of-the-BCM2838.patch new file mode 100644 index 0000000000..d960766911 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0488-mmc-sdhci-iproc-Add-support-for-emmc2-of-the-BCM2838.patch @@ -0,0 +1,36 @@ +From 0a1c3ff378e60f2a59153cfc1c7529bfe05eb115 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 27 Apr 2019 12:33:57 +0200 +Subject: [PATCH] mmc: sdhci-iproc: Add support for emmc2 of the + BCM2838 + +The emmc2 interface of the BCM2838 should be integrated in sdhci-iproc +to avoid code redundancy. Except 32 bit only access no other quirks are +known yet. Add an additional compatible string for upstream proposal. + +Signed-off-by: Stefan Wahren +--- + drivers/mmc/host/sdhci-iproc.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/mmc/host/sdhci-iproc.c ++++ b/drivers/mmc/host/sdhci-iproc.c +@@ -250,8 +250,18 @@ static const struct sdhci_iproc_data bcm + .mmc_caps = 0x00000000, + }; + ++static const struct sdhci_pltfm_data sdhci_bcm2838_pltfm_data = { ++ .ops = &sdhci_iproc_32only_ops, ++}; ++ ++static const struct sdhci_iproc_data bcm2838_data = { ++ .pdata = &sdhci_bcm2838_pltfm_data, ++}; ++ + static const struct of_device_id sdhci_iproc_of_match[] = { + { .compatible = "brcm,bcm2835-sdhci", .data = &bcm2835_data }, ++ { .compatible = "brcm,bcm2838-sdhci", .data = &bcm2838_data }, ++ { .compatible = "brcm,bcm2711-emmc2", .data = &bcm2838_data }, + { .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_cygnus_data}, + { .compatible = "brcm,sdhci-iproc", .data = &iproc_data }, + { } diff --git a/target/linux/brcm2708/patches-4.19/950-0489-Added-IQaudIO-Pi-Codec-board-support-2969.patch b/target/linux/brcm2708/patches-4.19/950-0489-Added-IQaudIO-Pi-Codec-board-support-2969.patch deleted file mode 100644 index 1666b3f507..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0489-Added-IQaudIO-Pi-Codec-board-support-2969.patch +++ /dev/null @@ -1,376 +0,0 @@ -From 930c49de8674acda0f143f7bc182ed2fad8c4f9d Mon Sep 17 00:00:00 2001 -From: IQaudIO -Date: Mon, 13 May 2019 21:53:05 +0100 -Subject: [PATCH 489/806] Added IQaudIO Pi-Codec board support (#2969) - -Add support for the IQaudIO Pi-Codec board. - -Signed-off-by: Gordon ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 + - .../dts/overlays/iqaudio-codec-overlay.dts | 42 +++ - sound/soc/bcm/Kconfig | 7 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/iqaudio-codec.c | 250 ++++++++++++++++++ - 9 files changed, 311 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts - create mode 100644 sound/soc/bcm/iqaudio-codec.c - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -68,6 +68,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - i2c1-bcm2708.dtbo \ - i2s-gpio28-31.dtbo \ - ilitek251x.dtbo \ -+ iqaudio-codec.dtbo \ - iqaudio-dac.dtbo \ - iqaudio-dacplus.dtbo \ - iqaudio-digi-wm8804-audio.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1160,6 +1160,12 @@ Params: interrupt GPIO use - touchscreen (in pixels) - - -+Name: iqaudio-codec -+Info: Configures the IQaudio Codec audio card -+Load: dtoverlay=iqaudio-codec -+Params: -+ -+ - Name: iqaudio-dac - Info: Configures the IQaudio DAC audio card - Load: dtoverlay=iqaudio-dac, ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts -@@ -0,0 +1,42 @@ -+// Definitions for IQaudIO CODEC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ da2713@1a { -+ #sound-dai-cells = <0>; -+ compatible = "dlg,da7213"; -+ reg = <0x1a>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ iqaudio_dac: __overlay__ { -+ compatible = "iqaudio,iqaudio-codec"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ }; -+}; ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -108,6 +108,13 @@ config SND_BCM2708_SOC_JUSTBOOM_DIGI - help - Say Y or M if you want to add support for JustBoom Digi. - -+config SND_BCM2708_SOC_IQAUDIO_CODEC -+ tristate "Support for IQaudIO-CODEC" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_DA7213 -+ help -+ Say Y or M if you want to add support for IQaudIO-CODEC. -+ - config SND_BCM2708_SOC_IQAUDIO_DAC - tristate "Support for IQaudIO-DAC" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -18,6 +18,7 @@ snd-soc-hifiberry-dacplusadc-objs := hif - snd-soc-justboom-dac-objs := justboom-dac.o - snd-soc-rpi-cirrus-objs := rpi-cirrus.o - snd-soc-rpi-proto-objs := rpi-proto.o -+snd-soc-iqaudio-codec-objs := iqaudio-codec.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o - snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o - snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o -@@ -42,6 +43,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D - obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o -+obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_CODEC) += snd-soc-iqaudio-codec.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o - obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o ---- /dev/null -+++ b/sound/soc/bcm/iqaudio-codec.c -@@ -0,0 +1,250 @@ -+/* -+ * ASoC Driver for IQaudIO Raspberry Pi Codec board -+ * -+ * Author: Gordon Garrity -+ * (C) Copyright IQaudio Limited, 2017-2019 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "../codecs/da7213.h" -+ -+static int pll_out = DA7213_PLL_FREQ_OUT_90316800; -+ -+static int snd_rpi_iqaudio_pll_control(struct snd_soc_dapm_widget *w, -+ struct snd_kcontrol *k, int event) -+{ -+ int ret = 0; -+ struct snd_soc_dapm_context *dapm = w->dapm; -+ struct snd_soc_card *card = dapm->card; -+ struct snd_soc_pcm_runtime *rtd = -+ snd_soc_get_pcm_runtime(card, card->dai_link[0].name); -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ -+ if (SND_SOC_DAPM_EVENT_OFF(event)) { -+ ret = snd_soc_dai_set_pll(codec_dai, 0, DA7213_SYSCLK_MCLK, 0, -+ 0); -+ if (ret) -+ dev_err(card->dev, "Failed to bypass PLL: %d\n", ret); -+ } else if (SND_SOC_DAPM_EVENT_ON(event)) { -+ ret = snd_soc_dai_set_pll(codec_dai, 0, DA7213_SYSCLK_PLL, 0, -+ pll_out); -+ if (ret) -+ dev_err(card->dev, "Failed to enable PLL: %d\n", ret); -+ } -+ -+ return ret; -+} -+ -+static int snd_rpi_iqaudio_post_dapm_event(struct snd_soc_dapm_widget *w, -+ struct snd_kcontrol *kcontrol, -+ int event) -+{ -+ switch (event) { -+ case SND_SOC_DAPM_POST_PMU: -+ /* Delay for mic bias ramp */ -+ msleep(1000); -+ break; -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+static const struct snd_soc_dapm_widget dapm_widgets[] = { -+ SND_SOC_DAPM_HP("HP Jack", NULL), -+ SND_SOC_DAPM_MIC("MIC Jack", NULL), -+ SND_SOC_DAPM_MIC("Onboard MIC", NULL), -+ SND_SOC_DAPM_LINE("AUX Jack", NULL), -+ SND_SOC_DAPM_SUPPLY("PLL Control", SND_SOC_NOPM, 0, 0, -+ snd_rpi_iqaudio_pll_control, -+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), -+ SND_SOC_DAPM_POST("Post Power Up Event", snd_rpi_iqaudio_post_dapm_event), -+}; -+ -+static const struct snd_soc_dapm_route audio_map[] = { -+ {"HP Jack", NULL, "HPL"}, -+ {"HP Jack", NULL, "HPR"}, -+ {"HP Jack", NULL, "PLL Control"}, -+ -+ {"AUX Jack", NULL, "AUXR"}, -+ {"AUX Jack", NULL, "AUXL"}, -+ {"AUX Jack", NULL, "PLL Control"}, -+ -+ /* Assume Mic1 is linked to Headset and Mic2 to on-board mic */ -+ {"MIC Jack", NULL, "MIC1"}, -+ {"MIC Jack", NULL, "PLL Control"}, -+ {"Onboard MIC", NULL, "MIC2"}, -+ {"Onboard MIC", NULL, "PLL Control"}, -+}; -+ -+/* machine stream operations */ -+ -+static int snd_rpi_iqaudio_codec_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ int ret; -+ -+ /* Set bclk ratio to align with codec's BCLK rate */ -+ ret = snd_soc_dai_set_bclk_ratio(cpu_dai, 64); -+ if (ret) { -+ dev_err(rtd->dev, "Failed to set CPU BLCK ratio\n"); -+ return ret; -+ } -+ -+ /* Set MCLK frequency to codec, onboard 11.2896MHz clock */ -+ return snd_soc_dai_set_sysclk(codec_dai, DA7213_CLKSRC_MCLK, 11289600, -+ SND_SOC_CLOCK_OUT); -+} -+ -+static int snd_rpi_iqaudio_codec_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ unsigned int samplerate = params_rate(params); -+ -+ switch (samplerate) { -+ case 8000: -+ case 16000: -+ case 32000: -+ case 48000: -+ case 96000: -+ pll_out = DA7213_PLL_FREQ_OUT_98304000; -+ return 0; -+ case 44100: -+ case 88200: -+ pll_out = DA7213_PLL_FREQ_OUT_90316800; -+ return 0; -+ default: -+ dev_err(rtd->dev,"Unsupported samplerate %d\n", samplerate); -+ return -EINVAL; -+ } -+} -+ -+static const struct snd_soc_ops snd_rpi_iqaudio_codec_ops = { -+ .hw_params = snd_rpi_iqaudio_codec_hw_params, -+}; -+ -+ -+static struct snd_soc_dai_link snd_rpi_iqaudio_codec_dai[] = { -+{ -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "da7213-hifi", -+ .platform_name = "bmc2708-i2s.0", -+ .codec_name = "da7213.1-001a", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ .init = snd_rpi_iqaudio_codec_init, -+ .ops = &snd_rpi_iqaudio_codec_ops, -+ .symmetric_rates = 1, -+ .symmetric_channels = 1, -+ .symmetric_samplebits = 1, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_iqaudio_codec = { -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_iqaudio_codec_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_codec_dai), -+ .dapm_widgets = dapm_widgets, -+ .num_dapm_widgets = ARRAY_SIZE(dapm_widgets), -+ .dapm_routes = audio_map, -+ .num_dapm_routes = ARRAY_SIZE(audio_map), -+}; -+ -+static int snd_rpi_iqaudio_codec_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_iqaudio_codec.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_card *card = &snd_rpi_iqaudio_codec; -+ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_codec_dai[0]; -+ -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ -+ if (of_property_read_string(pdev->dev.of_node, "card_name", -+ &card->name)) -+ card->name = "IQaudIOCODEC"; -+ -+ if (of_property_read_string(pdev->dev.of_node, "dai_name", -+ &dai->name)) -+ dai->name = "IQaudIO CODEC"; -+ -+ if (of_property_read_string(pdev->dev.of_node, -+ "dai_stream_name", &dai->stream_name)) -+ dai->stream_name = "IQaudIO CODEC HiFi v1.1"; -+ -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_iqaudio_codec); -+ if (ret) { -+ if (ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int snd_rpi_iqaudio_codec_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_iqaudio_codec); -+} -+ -+static const struct of_device_id iqaudio_of_match[] = { -+ { .compatible = "iqaudio,iqaudio-codec", }, -+ {}, -+}; -+ -+MODULE_DEVICE_TABLE(of, iqaudio_of_match); -+ -+static struct platform_driver snd_rpi_iqaudio_codec_driver = { -+ .driver = { -+ .name = "snd-rpi-iqaudio-codec", -+ .owner = THIS_MODULE, -+ .of_match_table = iqaudio_of_match, -+ }, -+ .probe = snd_rpi_iqaudio_codec_probe, -+ .remove = snd_rpi_iqaudio_codec_remove, -+}; -+ -+ -+ -+module_platform_driver(snd_rpi_iqaudio_codec_driver); -+ -+MODULE_AUTHOR("Gordon Garrity "); -+MODULE_DESCRIPTION("ASoC Driver for IQaudIO CODEC"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.19/950-0489-hwrng-iproc-rng200-Add-BCM2838-support.patch b/target/linux/brcm2708/patches-4.19/950-0489-hwrng-iproc-rng200-Add-BCM2838-support.patch new file mode 100644 index 0000000000..c2a29a01ca --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0489-hwrng-iproc-rng200-Add-BCM2838-support.patch @@ -0,0 +1,158 @@ +From e9c0fd87b6169baf5bd10293a85675d505086191 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 4 May 2019 17:06:15 +0200 +Subject: [PATCH] hwrng: iproc-rng200: Add BCM2838 support + +The HWRNG on the BCM2838 is compatible to iproc-rng200, so add the +support to this driver instead of bcm2835-rng. + +Signed-off-by: Stefan Wahren +--- + drivers/char/hw_random/Kconfig | 4 +- + drivers/char/hw_random/iproc-rng200.c | 81 +++++++++++++++++++++++++-- + 2 files changed, 79 insertions(+), 6 deletions(-) + +--- a/drivers/char/hw_random/Kconfig ++++ b/drivers/char/hw_random/Kconfig +@@ -89,11 +89,11 @@ config HW_RANDOM_BCM2835 + + config HW_RANDOM_IPROC_RNG200 + tristate "Broadcom iProc/STB RNG200 support" +- depends on ARCH_BCM_IPROC || ARCH_BRCMSTB ++ depends on ARCH_BCM_IPROC || ARCH_BCM2835 || ARCH_BRCMSTB + default HW_RANDOM + ---help--- + This driver provides kernel-side support for the RNG200 +- hardware found on the Broadcom iProc and STB SoCs. ++ hardware found on the Broadcom iProc, BCM2838 and STB SoCs. + + To compile this driver as a module, choose M here: the + module will be called iproc-rng200 +--- a/drivers/char/hw_random/iproc-rng200.c ++++ b/drivers/char/hw_random/iproc-rng200.c +@@ -29,6 +29,7 @@ + #define RNG_CTRL_RNG_RBGEN_MASK 0x00001FFF + #define RNG_CTRL_RNG_RBGEN_ENABLE 0x00000001 + #define RNG_CTRL_RNG_RBGEN_DISABLE 0x00000000 ++#define RNG_CTRL_RNG_DIV_CTRL_SHIFT 13 + + #define RNG_SOFT_RESET_OFFSET 0x04 + #define RNG_SOFT_RESET 0x00000001 +@@ -36,16 +37,23 @@ + #define RBG_SOFT_RESET_OFFSET 0x08 + #define RBG_SOFT_RESET 0x00000001 + ++#define RNG_TOTAL_BIT_COUNT_OFFSET 0x0C ++ ++#define RNG_TOTAL_BIT_COUNT_THRESHOLD_OFFSET 0x10 ++ + #define RNG_INT_STATUS_OFFSET 0x18 + #define RNG_INT_STATUS_MASTER_FAIL_LOCKOUT_IRQ_MASK 0x80000000 + #define RNG_INT_STATUS_STARTUP_TRANSITIONS_MET_IRQ_MASK 0x00020000 + #define RNG_INT_STATUS_NIST_FAIL_IRQ_MASK 0x00000020 + #define RNG_INT_STATUS_TOTAL_BITS_COUNT_IRQ_MASK 0x00000001 + ++#define RNG_INT_ENABLE_OFFSET 0x1C ++ + #define RNG_FIFO_DATA_OFFSET 0x20 + + #define RNG_FIFO_COUNT_OFFSET 0x24 + #define RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK 0x000000FF ++#define RNG_FIFO_COUNT_RNG_FIFO_THRESHOLD_SHIFT 8 + + struct iproc_rng200_dev { + struct hwrng rng; +@@ -166,6 +174,64 @@ static int iproc_rng200_init(struct hwrn + return 0; + } + ++static int bcm2838_rng200_read(struct hwrng *rng, void *buf, size_t max, ++ bool wait) ++{ ++ struct iproc_rng200_dev *priv = to_rng_priv(rng); ++ u32 max_words = max / sizeof(u32); ++ u32 num_words, count, val; ++ ++ /* ensure warm up period has elapsed */ ++ while (1) { ++ val = ioread32(priv->base + RNG_TOTAL_BIT_COUNT_OFFSET); ++ if (val > 16) ++ break; ++ cpu_relax(); ++ } ++ ++ /* ensure fifo is not empty */ ++ while (1) { ++ num_words = ioread32(priv->base + RNG_FIFO_COUNT_OFFSET) & ++ RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK; ++ if (num_words) ++ break; ++ if (!wait) ++ return 0; ++ cpu_relax(); ++ } ++ ++ if (num_words > max_words) ++ num_words = max_words; ++ ++ for (count = 0; count < num_words; count++) { ++ ((u32 *)buf)[count] = ioread32(priv->base + ++ RNG_FIFO_DATA_OFFSET); ++ } ++ ++ return num_words * sizeof(u32); ++} ++ ++static int bcm2838_rng200_init(struct hwrng *rng) ++{ ++ struct iproc_rng200_dev *priv = to_rng_priv(rng); ++ uint32_t val; ++ ++ if (ioread32(priv->base + RNG_CTRL_OFFSET) & RNG_CTRL_RNG_RBGEN_MASK) ++ return 0; ++ ++ /* initial numbers generated are "less random" so will be discarded */ ++ val = 0x40000; ++ iowrite32(val, priv->base + RNG_TOTAL_BIT_COUNT_THRESHOLD_OFFSET); ++ /* min fifo count to generate full interrupt */ ++ val = 2 << RNG_FIFO_COUNT_RNG_FIFO_THRESHOLD_SHIFT; ++ iowrite32(val, priv->base + RNG_FIFO_COUNT_OFFSET); ++ /* enable the rng - 1Mhz sample rate */ ++ val = (0x3 << RNG_CTRL_RNG_DIV_CTRL_SHIFT) | RNG_CTRL_RNG_RBGEN_MASK; ++ iowrite32(val, priv->base + RNG_CTRL_OFFSET); ++ ++ return 0; ++} ++ + static void iproc_rng200_cleanup(struct hwrng *rng) + { + struct iproc_rng200_dev *priv = to_rng_priv(rng); +@@ -202,10 +268,16 @@ static int iproc_rng200_probe(struct pla + return PTR_ERR(priv->base); + } + +- priv->rng.name = "iproc-rng200", +- priv->rng.read = iproc_rng200_read, +- priv->rng.init = iproc_rng200_init, +- priv->rng.cleanup = iproc_rng200_cleanup, ++ priv->rng.name = pdev->name; ++ priv->rng.cleanup = iproc_rng200_cleanup; ++ ++ if (of_device_is_compatible(dev->of_node, "brcm,bcm2838-rng200")) { ++ priv->rng.init = bcm2838_rng200_init; ++ priv->rng.read = bcm2838_rng200_read; ++ } else { ++ priv->rng.init = iproc_rng200_init; ++ priv->rng.read = iproc_rng200_read; ++ } + + /* Register driver */ + ret = devm_hwrng_register(dev, &priv->rng); +@@ -222,6 +294,7 @@ static int iproc_rng200_probe(struct pla + static const struct of_device_id iproc_rng200_of_match[] = { + { .compatible = "brcm,bcm7278-rng200", }, + { .compatible = "brcm,iproc-rng200", }, ++ { .compatible = "brcm,bcm2838-rng200"}, + {}, + }; + MODULE_DEVICE_TABLE(of, iproc_rng200_of_match); diff --git a/target/linux/brcm2708/patches-4.19/950-0490-Revert-smsc95xx-dynamically-fix-up-TX-buffer-alignme.patch b/target/linux/brcm2708/patches-4.19/950-0490-Revert-smsc95xx-dynamically-fix-up-TX-buffer-alignme.patch deleted file mode 100644 index 7eea87d0dc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0490-Revert-smsc95xx-dynamically-fix-up-TX-buffer-alignme.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 89bb75e008adf061e3e396de76020b00ea0d6123 Mon Sep 17 00:00:00 2001 -From: P33M -Date: Tue, 14 May 2019 14:55:19 +0100 -Subject: [PATCH 490/806] Revert "smsc95xx: dynamically fix up TX buffer - alignment with padding bytes" - -As reported in https://github.com/raspberrypi/linux/issues/2964 this -commit causes a regression corrupting non-option TCP ack packets. - -This reverts commit 96b972dc736d943f371a16ccca452a053d83c65b. ---- - drivers/net/usb/smsc95xx.c | 12 +++++------- - drivers/net/usb/smsc95xx.h | 2 +- - 2 files changed, 6 insertions(+), 8 deletions(-) - ---- a/drivers/net/usb/smsc95xx.c -+++ b/drivers/net/usb/smsc95xx.c -@@ -2082,9 +2082,7 @@ static struct sk_buff *smsc95xx_tx_fixup - struct sk_buff *skb, gfp_t flags) - { - bool csum = skb->ip_summed == CHECKSUM_PARTIAL; -- unsigned int align_bytes = -((uintptr_t)skb->data) & 0x3; -- int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM + align_bytes -- : SMSC95XX_TX_OVERHEAD + align_bytes; -+ int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD; - u32 tx_cmd_a, tx_cmd_b; - - /* We do not advertise SG, so skbs should be already linearized */ -@@ -2118,16 +2116,16 @@ static struct sk_buff *smsc95xx_tx_fixup - } - } - -- skb_push(skb, 4 + align_bytes); -- tx_cmd_b = (u32)(skb->len - 4 - align_bytes); -+ skb_push(skb, 4); -+ tx_cmd_b = (u32)(skb->len - 4); - if (csum) - tx_cmd_b |= TX_CMD_B_CSUM_ENABLE; - cpu_to_le32s(&tx_cmd_b); - memcpy(skb->data, &tx_cmd_b, 4); - - skb_push(skb, 4); -- tx_cmd_a = (u32)(skb->len - 8 - align_bytes) | TX_CMD_A_FIRST_SEG_ | -- (align_bytes << 16) | TX_CMD_A_LAST_SEG_; -+ tx_cmd_a = (u32)(skb->len - 8) | TX_CMD_A_FIRST_SEG_ | -+ TX_CMD_A_LAST_SEG_; - cpu_to_le32s(&tx_cmd_a); - memcpy(skb->data, &tx_cmd_a, 4); - ---- a/drivers/net/usb/smsc95xx.h -+++ b/drivers/net/usb/smsc95xx.h -@@ -21,7 +21,7 @@ - #define _SMSC95XX_H - - /* Tx command words */ --#define TX_CMD_A_DATA_OFFSET_ (0x00030000) /* Data Start Offset */ -+#define TX_CMD_A_DATA_OFFSET_ (0x001F0000) /* Data Start Offset */ - #define TX_CMD_A_FIRST_SEG_ (0x00002000) /* First Segment */ - #define TX_CMD_A_LAST_SEG_ (0x00001000) /* Last Segment */ - #define TX_CMD_A_BUF_SIZE_ (0x000007FF) /* Buffer Size */ diff --git a/target/linux/brcm2708/patches-4.19/950-0490-thermal-brcmstb_thermal-Add-BCM2838-support.patch b/target/linux/brcm2708/patches-4.19/950-0490-thermal-brcmstb_thermal-Add-BCM2838-support.patch new file mode 100644 index 0000000000..6bc76ed6e6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0490-thermal-brcmstb_thermal-Add-BCM2838-support.patch @@ -0,0 +1,162 @@ +From d49649e2dcf0d5775e92677d37e229e0387fe82a Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sat, 18 May 2019 12:26:11 +0200 +Subject: [PATCH] thermal: brcmstb_thermal: Add BCM2838 support + +The BCM2838 has an AVS TMON hardware block. This adds the necessary +support to the brcmstb_thermal driver ( no trip handling ). + +Signed-off-by: Stefan Wahren +--- + drivers/thermal/broadcom/Kconfig | 2 +- + drivers/thermal/broadcom/brcmstb_thermal.c | 65 +++++++++++++++++++--- + 2 files changed, 58 insertions(+), 9 deletions(-) + +--- a/drivers/thermal/broadcom/Kconfig ++++ b/drivers/thermal/broadcom/Kconfig +@@ -8,7 +8,7 @@ config BCM2835_THERMAL + + config BRCMSTB_THERMAL + tristate "Broadcom STB AVS TMON thermal driver" +- depends on ARCH_BRCMSTB || COMPILE_TEST ++ depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST + help + Enable this driver if you have a Broadcom STB SoC and would like + thermal framework support. +--- a/drivers/thermal/broadcom/brcmstb_thermal.c ++++ b/drivers/thermal/broadcom/brcmstb_thermal.c +@@ -19,6 +19,7 @@ + #define pr_fmt(fmt) DRV_NAME ": " fmt + + #include ++#include + #include + #include + #include +@@ -31,9 +32,6 @@ + #include + + #define AVS_TMON_STATUS 0x00 +- #define AVS_TMON_STATUS_valid_msk BIT(11) +- #define AVS_TMON_STATUS_data_msk GENMASK(10, 1) +- #define AVS_TMON_STATUS_data_shift 1 + + #define AVS_TMON_EN_OVERTEMP_RESET 0x04 + #define AVS_TMON_EN_OVERTEMP_RESET_msk BIT(0) +@@ -111,10 +109,19 @@ static struct avs_tmon_trip avs_tmon_tri + }, + }; + ++struct brcmstb_thermal_of_data { ++ const struct thermal_zone_of_device_ops *of_ops; ++ u32 status_valid_mask; ++ u32 status_data_mask; ++ u32 status_data_shift; ++}; ++ + struct brcmstb_thermal_priv { + void __iomem *tmon_base; + struct device *dev; + struct thermal_zone_device *thermal; ++ struct clk *clk; ++ const struct brcmstb_thermal_of_data *socdata; + }; + + static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope, +@@ -164,17 +171,18 @@ static inline u32 avs_tmon_temp_to_code( + static int brcmstb_get_temp(void *data, int *temp) + { + struct brcmstb_thermal_priv *priv = data; ++ const struct brcmstb_thermal_of_data *socdata = priv->socdata; + u32 val; + long t; + + val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS); + +- if (!(val & AVS_TMON_STATUS_valid_msk)) { ++ if (!(val & socdata->status_valid_mask)) { + dev_err(priv->dev, "reading not valid\n"); + return -EIO; + } + +- val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift; ++ val = (val & socdata->status_data_mask) >> socdata->status_data_shift; + + t = avs_tmon_code_to_temp(priv->thermal, val); + if (t < 0) +@@ -299,13 +307,34 @@ static int brcmstb_set_trips(void *data, + return 0; + } + +-static struct thermal_zone_of_device_ops of_ops = { ++static const struct thermal_zone_of_device_ops bcm7445_thermal_of_ops = { + .get_temp = brcmstb_get_temp, + .set_trips = brcmstb_set_trips, + }; + ++static const struct thermal_zone_of_device_ops bcm2838_thermal_of_ops = { ++ .get_temp = brcmstb_get_temp, ++}; ++ ++static const struct brcmstb_thermal_of_data bcm7445_thermal_of_data = { ++ .of_ops = &bcm7445_thermal_of_ops, ++ .status_valid_mask = BIT(11), ++ .status_data_mask = GENMASK(10, 1), ++ .status_data_shift = 1, ++}; ++ ++static const struct brcmstb_thermal_of_data bcm2838_thermal_of_data = { ++ .of_ops = &bcm2838_thermal_of_ops, ++ .status_valid_mask = BIT(10), ++ .status_data_mask = GENMASK(9, 0), ++ .status_data_shift = 0, ++}; ++ + static const struct of_device_id brcmstb_thermal_id_table[] = { +- { .compatible = "brcm,avs-tmon" }, ++ { .compatible = "brcm,avs-tmon", ++ .data = &bcm7445_thermal_of_data }, ++ { .compatible = "brcm,avs-tmon-bcm2838", ++ .data = &bcm2838_thermal_of_data }, + {}, + }; + MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table); +@@ -326,10 +355,27 @@ static int brcmstb_thermal_probe(struct + if (IS_ERR(priv->tmon_base)) + return PTR_ERR(priv->tmon_base); + ++ priv->socdata = of_device_get_match_data(&pdev->dev); ++ if (!priv->socdata) { ++ dev_err(&pdev->dev, "no device match found\n"); ++ return -ENODEV; ++ } ++ ++ priv->clk = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(priv->clk) && PTR_ERR(priv->clk) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; ++ ++ if (!IS_ERR(priv->clk)) { ++ ret = clk_prepare_enable(priv->clk); ++ if (ret) ++ return ret; ++ } ++ + priv->dev = &pdev->dev; + platform_set_drvdata(pdev, priv); + +- thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops); ++ thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, ++ priv->socdata->of_ops); + if (IS_ERR(thermal)) { + ret = PTR_ERR(thermal); + dev_err(&pdev->dev, "could not register sensor: %d\n", ret); +@@ -369,6 +415,9 @@ static int brcmstb_thermal_exit(struct p + if (thermal) + thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal); + ++ if (!IS_ERR(priv->clk)) ++ clk_disable_unprepare(priv->clk); ++ + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0491-vchiq-Add-36-bit-address-support.patch b/target/linux/brcm2708/patches-4.19/950-0491-vchiq-Add-36-bit-address-support.patch new file mode 100644 index 0000000000..e1eec5d9d9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0491-vchiq-Add-36-bit-address-support.patch @@ -0,0 +1,196 @@ +From d5c6191cc94b358de183cc8c88a5722a79445202 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 1 Nov 2018 17:31:37 +0000 +Subject: [PATCH] vchiq: Add 36-bit address support + +Conditional on a new compatible string, change the pagelist encoding +such that the top 24 bits are the pfn, leaving 8 bits for run length +(-1). + +Signed-off-by: Phil Elwell +--- + .../interface/vchiq_arm/vchiq_2835_arm.c | 90 ++++++++++++++----- + .../interface/vchiq_arm/vchiq_arm.c | 6 ++ + .../interface/vchiq_arm/vchiq_arm.h | 1 + + 3 files changed, 75 insertions(+), 22 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +@@ -47,6 +47,8 @@ + #include + + #define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32) ++#define VC_SAFE(x) (g_use_36bit_addrs ? ((u32)(x) | 0xc0000000) : (u32)(x)) ++#define IS_VC_SAFE(x) (g_use_36bit_addrs ? !((x) & ~0x3fffffffull) : 1) + + #include "vchiq_arm.h" + #include "vchiq_connected.h" +@@ -96,6 +98,7 @@ static void __iomem *g_regs; + */ + static unsigned int g_cache_line_size; + static struct dma_pool *g_dma_pool; ++static unsigned int g_use_36bit_addrs = 0; + static unsigned int g_fragments_size; + static char *g_fragments_base; + static char *g_free_fragments; +@@ -139,6 +142,8 @@ int vchiq_platform_init(struct platform_ + g_cache_line_size = drvdata->cache_line_size; + g_fragments_size = 2 * g_cache_line_size; + ++ g_use_36bit_addrs = (dev->dma_pfn_offset == 0); ++ + /* Allocate space for the channels in coherent memory */ + slot_mem_size = PAGE_ALIGN(TOTAL_SLOTS * VCHIQ_SLOT_SIZE); + frag_mem_size = PAGE_ALIGN(g_fragments_size * MAX_FRAGMENTS); +@@ -150,14 +155,21 @@ int vchiq_platform_init(struct platform_ + return -ENOMEM; + } + ++ if (!IS_VC_SAFE(slot_phys)) { ++ dev_err(dev, "allocated DMA memory %pad is not VC-safe\n", ++ &slot_phys); ++ return -ENOMEM; ++ } ++ + WARN_ON(((unsigned long)slot_mem & (PAGE_SIZE - 1)) != 0); ++ channelbase = VC_SAFE(slot_phys); + + vchiq_slot_zero = vchiq_init_slots(slot_mem, slot_mem_size); + if (!vchiq_slot_zero) + return -EINVAL; + + vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX] = +- (int)slot_phys + slot_mem_size; ++ channelbase + slot_mem_size; + vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX] = + MAX_FRAGMENTS; + +@@ -193,7 +205,6 @@ int vchiq_platform_init(struct platform_ + } + + /* Send the base address of the slots to VideoCore */ +- channelbase = slot_phys; + err = rpi_firmware_property(fw, RPI_FIRMWARE_VCHIQ_INIT, + &channelbase, sizeof(channelbase)); + if (err || channelbase) { +@@ -282,7 +293,7 @@ vchiq_prepare_bulk_data(VCHIQ_BULK_T *bu + return VCHIQ_ERROR; + + bulk->handle = memhandle; +- bulk->data = (void *)(unsigned long)pagelistinfo->dma_addr; ++ bulk->data = (void *)VC_SAFE(pagelistinfo->dma_addr); + + /* + * Store the pagelistinfo address in remote_data, +@@ -570,25 +581,60 @@ create_pagelist(char __user *buf, size_t + + /* Combine adjacent blocks for performance */ + k = 0; +- for_each_sg(scatterlist, sg, dma_buffers, i) { +- u32 len = sg_dma_len(sg); +- u32 addr = sg_dma_address(sg); +- +- /* Note: addrs is the address + page_count - 1 +- * The firmware expects blocks after the first to be page- +- * aligned and a multiple of the page size +- */ +- WARN_ON(len == 0); +- WARN_ON(i && (i != (dma_buffers - 1)) && (len & ~PAGE_MASK)); +- WARN_ON(i && (addr & ~PAGE_MASK)); +- if (k > 0 && +- ((addrs[k - 1] & PAGE_MASK) + +- (((addrs[k - 1] & ~PAGE_MASK) + 1) << PAGE_SHIFT)) +- == (addr & PAGE_MASK)) +- addrs[k - 1] += ((len + PAGE_SIZE - 1) >> PAGE_SHIFT); +- else +- addrs[k++] = (addr & PAGE_MASK) | +- (((len + PAGE_SIZE - 1) >> PAGE_SHIFT) - 1); ++ if (g_use_36bit_addrs) { ++ for_each_sg(scatterlist, sg, dma_buffers, i) { ++ u32 len = sg_dma_len(sg); ++ u64 addr = sg_dma_address(sg); ++ u32 page_id = (u32)((addr >> 4) & ~0xff); ++ u32 sg_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; ++ ++ /* Note: addrs is the address + page_count - 1 ++ * The firmware expects blocks after the first to be page- ++ * aligned and a multiple of the page size ++ */ ++ WARN_ON(len == 0); ++ WARN_ON(i && ++ (i != (dma_buffers - 1)) && (len & ~PAGE_MASK)); ++ WARN_ON(i && (addr & ~PAGE_MASK)); ++ WARN_ON(upper_32_bits(addr) > 0xf); ++ if (k > 0 && ++ ((addrs[k - 1] & ~0xff) + ++ (((addrs[k - 1] & 0xff) + 1) << 8) ++ == page_id)) { ++ u32 inc_pages = min(sg_pages, ++ 0xff - (addrs[k - 1] & 0xff)); ++ addrs[k - 1] += inc_pages; ++ page_id += inc_pages << 8; ++ sg_pages -= inc_pages; ++ } ++ while (sg_pages) { ++ u32 inc_pages = min(sg_pages, 0x100u); ++ addrs[k++] = page_id | (inc_pages - 1); ++ page_id += inc_pages << 8; ++ sg_pages -= inc_pages; ++ } ++ } ++ } else { ++ for_each_sg(scatterlist, sg, dma_buffers, i) { ++ u32 len = sg_dma_len(sg); ++ u32 addr = VC_SAFE(sg_dma_address(sg)); ++ u32 new_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; ++ ++ /* Note: addrs is the address + page_count - 1 ++ * The firmware expects blocks after the first to be page- ++ * aligned and a multiple of the page size ++ */ ++ WARN_ON(len == 0); ++ WARN_ON(i && (i != (dma_buffers - 1)) && (len & ~PAGE_MASK)); ++ WARN_ON(i && (addr & ~PAGE_MASK)); ++ if (k > 0 && ++ ((addrs[k - 1] & PAGE_MASK) + ++ (((addrs[k - 1] & ~PAGE_MASK) + 1) << PAGE_SHIFT)) ++ == (addr & PAGE_MASK)) ++ addrs[k - 1] += new_pages; ++ else ++ addrs[k++] = (addr & PAGE_MASK) | (new_pages - 1); ++ } + } + + /* Partial cache lines (fragments) require special measures */ +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -181,6 +181,11 @@ static struct vchiq_drvdata bcm2836_drvd + .cache_line_size = 64, + }; + ++static struct vchiq_drvdata bcm2838_drvdata = { ++ .cache_line_size = 64, ++ .use_36bit_addrs = true, ++}; ++ + static const char *const ioctl_names[] = { + "CONNECT", + "SHUTDOWN", +@@ -3618,6 +3623,7 @@ vchiq_register_child(struct platform_dev + static const struct of_device_id vchiq_of_match[] = { + { .compatible = "brcm,bcm2835-vchiq", .data = &bcm2835_drvdata }, + { .compatible = "brcm,bcm2836-vchiq", .data = &bcm2836_drvdata }, ++ { .compatible = "brcm,bcm2838-vchiq", .data = &bcm2838_drvdata }, + {}, + }; + MODULE_DEVICE_TABLE(of, vchiq_of_match); +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h +@@ -125,6 +125,7 @@ typedef struct vchiq_arm_state_struct { + + struct vchiq_drvdata { + const unsigned int cache_line_size; ++ const bool use_36bit_addrs; + struct rpi_firmware *fw; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0492-bcm2835-pcm.c-Support-multichannel-audio.patch b/target/linux/brcm2708/patches-4.19/950-0492-bcm2835-pcm.c-Support-multichannel-audio.patch new file mode 100644 index 0000000000..47898dbd94 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0492-bcm2835-pcm.c-Support-multichannel-audio.patch @@ -0,0 +1,46 @@ +From 69d7e7d0f958186a0f7667ebeefdb50d1c5c3bd3 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 30 Apr 2019 19:15:30 +0100 +Subject: [PATCH] bcm2835-pcm.c: Support multichannel audio + +--- + .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 17 +++++++++-------- + 1 file changed, 9 insertions(+), 8 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +@@ -14,9 +14,9 @@ static const struct snd_pcm_hardware snd + SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR), + .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, +- .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_192000, + .rate_min = 8000, +- .rate_max = 48000, ++ .rate_max = 192000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = 128 * 1024, +@@ -31,15 +31,16 @@ static const struct snd_pcm_hardware snd + SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR), + .formats = SNDRV_PCM_FMTBIT_S16_LE, +- .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 | +- SNDRV_PCM_RATE_48000, ++ .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | ++ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | ++ SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000, + .rate_min = 44100, +- .rate_max = 48000, ++ .rate_max = 192000, + .channels_min = 2, +- .channels_max = 2, +- .buffer_bytes_max = 128 * 1024, ++ .channels_max = 8, ++ .buffer_bytes_max = 512 * 1024, + .period_bytes_min = 1 * 1024, +- .period_bytes_max = 128 * 1024, ++ .period_bytes_max = 512 * 1024, + .periods_min = 1, + .periods_max = 128, + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0492-w1-ds2408-reset-on-output_write-retry-with-readback.patch b/target/linux/brcm2708/patches-4.19/950-0492-w1-ds2408-reset-on-output_write-retry-with-readback.patch deleted file mode 100644 index e6978b7409..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0492-w1-ds2408-reset-on-output_write-retry-with-readback.patch +++ /dev/null @@ -1,140 +0,0 @@ -From 714580d7c11f81afb5e08c71f79a03a1ed4ae44e Mon Sep 17 00:00:00 2001 -From: Jean-Francois Dagenais -Date: Thu, 28 Mar 2019 12:41:11 -0400 -Subject: [PATCH 492/806] w1: ds2408: reset on output_write retry with readback - -commit 49695ac46861180baf2b2b92c62da8619b6bf28f upstream. - -When we have success in 'Channel Access Write' but reading back latch -states fails, a write is retried without doing a proper slave reset. -This leads to protocol errors as the slave treats the next 'Channel -Access Write' as the continuation of previous command. - -This commit is fixing this by making sure if the retry loop re-runs, a -reset is performed, whatever the failure (CONFIRM_BYTE or the read -back). - -The loop was quite due for a cleanup and this change mandated it. By -isolating the CONFIG_W1_SLAVE_DS2408_READBACK case into it's own -function, we vastly reduce the visual and branching(runtime and -compile-time) noise. - -Reported-by: Mariusz Bialonczyk -Tested-by: Mariusz Bialonczyk -Signed-off-by: Jean-Francois Dagenais -Signed-off-by: Greg Kroah-Hartman ---- - drivers/w1/slaves/w1_ds2408.c | 76 ++++++++++++++++++----------------- - 1 file changed, 39 insertions(+), 37 deletions(-) - ---- a/drivers/w1/slaves/w1_ds2408.c -+++ b/drivers/w1/slaves/w1_ds2408.c -@@ -138,14 +138,37 @@ static ssize_t status_control_read(struc - W1_F29_REG_CONTROL_AND_STATUS, buf); - } - -+#ifdef fCONFIG_W1_SLAVE_DS2408_READBACK -+static bool optional_read_back_valid(struct w1_slave *sl, u8 expected) -+{ -+ u8 w1_buf[3]; -+ -+ if (w1_reset_resume_command(sl->master)) -+ return false; -+ -+ w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS; -+ w1_buf[1] = W1_F29_REG_OUTPUT_LATCH_STATE; -+ w1_buf[2] = 0; -+ -+ w1_write_block(sl->master, w1_buf, 3); -+ -+ return (w1_read_8(sl->master) == expected); -+} -+#else -+static bool optional_read_back_valid(struct w1_slave *sl, u8 expected) -+{ -+ return true; -+} -+#endif -+ - static ssize_t output_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, char *buf, - loff_t off, size_t count) - { - struct w1_slave *sl = kobj_to_w1_slave(kobj); - u8 w1_buf[3]; -- u8 readBack; - unsigned int retries = W1_F29_RETRIES; -+ ssize_t bytes_written = -EIO; - - if (count != 1 || off != 0) - return -EFAULT; -@@ -155,54 +178,33 @@ static ssize_t output_write(struct file - dev_dbg(&sl->dev, "mutex locked"); - - if (w1_reset_select_slave(sl)) -- goto error; -+ goto out; - -- while (retries--) { -+ do { - w1_buf[0] = W1_F29_FUNC_CHANN_ACCESS_WRITE; - w1_buf[1] = *buf; - w1_buf[2] = ~(*buf); -- w1_write_block(sl->master, w1_buf, 3); - -- readBack = w1_read_8(sl->master); -+ w1_write_block(sl->master, w1_buf, 3); - -- if (readBack != W1_F29_SUCCESS_CONFIRM_BYTE) { -- if (w1_reset_resume_command(sl->master)) -- goto error; -- /* try again, the slave is ready for a command */ -- continue; -+ if (w1_read_8(sl->master) == W1_F29_SUCCESS_CONFIRM_BYTE && -+ optional_read_back_valid(sl, *buf)) { -+ bytes_written = 1; -+ goto out; - } - --#ifdef CONFIG_W1_SLAVE_DS2408_READBACK -- /* here the master could read another byte which -- would be the PIO reg (the actual pin logic state) -- since in this driver we don't know which pins are -- in and outs, there's no value to read the state and -- compare. with (*buf) so end this command abruptly: */ - if (w1_reset_resume_command(sl->master)) -- goto error; -+ goto out; /* unrecoverable error */ -+ /* try again, the slave is ready for a command */ -+ } while (--retries); - -- /* go read back the output latches */ -- /* (the direct effect of the write above) */ -- w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS; -- w1_buf[1] = W1_F29_REG_OUTPUT_LATCH_STATE; -- w1_buf[2] = 0; -- w1_write_block(sl->master, w1_buf, 3); -- /* read the result of the READ_PIO_REGS command */ -- if (w1_read_8(sl->master) == *buf) --#endif -- { -- /* success! */ -- mutex_unlock(&sl->master->bus_mutex); -- dev_dbg(&sl->dev, -- "mutex unlocked, retries:%d", retries); -- return 1; -- } -- } --error: -+out: - mutex_unlock(&sl->master->bus_mutex); -- dev_dbg(&sl->dev, "mutex unlocked in error, retries:%d", retries); - -- return -EIO; -+ dev_dbg(&sl->dev, "%s, mutex unlocked retries:%d\n", -+ (bytes_written > 0) ? "succeeded" : "error", retries); -+ -+ return bytes_written; - } - - diff --git a/target/linux/brcm2708/patches-4.19/950-0493-bcmgenet-constrain-max-DMA-burst-length.patch b/target/linux/brcm2708/patches-4.19/950-0493-bcmgenet-constrain-max-DMA-burst-length.patch new file mode 100644 index 0000000000..54ead878b0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0493-bcmgenet-constrain-max-DMA-burst-length.patch @@ -0,0 +1,20 @@ +From 12865021c91e21ca7189c6a84688459d400de204 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Wed, 12 Sep 2018 14:44:53 +0100 +Subject: [PATCH] bcmgenet: constrain max DMA burst length + +--- + drivers/net/ethernet/broadcom/genet/bcmgenet.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h ++++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h +@@ -31,7 +31,7 @@ + #define ENET_PAD 8 + #define ENET_MAX_MTU_SIZE (ETH_DATA_LEN + ETH_HLEN + VLAN_HLEN + \ + ENET_BRCM_TAG_LEN + ETH_FCS_LEN + ENET_PAD) +-#define DMA_MAX_BURST_LENGTH 0x10 ++#define DMA_MAX_BURST_LENGTH 0x08 + + /* misc. configuration */ + #define CLEAR_ALL_HFB 0xFF diff --git a/target/linux/brcm2708/patches-4.19/950-0493-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch b/target/linux/brcm2708/patches-4.19/950-0493-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch deleted file mode 100644 index c58b2bf8e5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0493-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch +++ /dev/null @@ -1,91 +0,0 @@ -From 2bf6a79fb6555b5ebf21d03b1295e017804474c4 Mon Sep 17 00:00:00 2001 -From: Mariusz Bialonczyk -Date: Mon, 4 Mar 2019 12:23:36 +0100 -Subject: [PATCH 493/806] w1: ds2482: cosmetic fixes after 54865314f5a1 - -commit 5cb27d30fc3a281e830a2099d520b469e2b82008 upstream. - -We have a helper function ds2482_calculate_config() which is calculating -the config value, so just use it instead of passing the same variable -in all calls to this function. - -Also fixes the placement of module parameters to match with: -50fa2951bd74 (w1: Organize driver source to natural/common order) -by Andrew F. Davis - -Signed-off-by: Mariusz Bialonczyk -Cc: Andrew Worsley -Cc: Andrew F. Davis -Signed-off-by: Greg Kroah-Hartman ---- - drivers/w1/masters/ds2482.c | 18 +++++++++++------- - 1 file changed, 11 insertions(+), 7 deletions(-) - ---- a/drivers/w1/masters/ds2482.c -+++ b/drivers/w1/masters/ds2482.c -@@ -37,6 +37,11 @@ module_param_named(active_pullup, ds2482 - MODULE_PARM_DESC(active_pullup, "Active pullup (apply to all buses): " \ - "0-disable, 1-enable (default)"); - -+/* extra configurations - e.g. 1WS */ -+static int extra_config; -+module_param(extra_config, int, S_IRUGO | S_IWUSR); -+MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS"); -+ - /** - * The DS2482 registers - there are 3 registers that are addressed by a read - * pointer. The read pointer is set by the last command executed. -@@ -70,8 +75,6 @@ MODULE_PARM_DESC(active_pullup, "Active - #define DS2482_REG_CFG_PPM 0x02 /* presence pulse masking */ - #define DS2482_REG_CFG_APU 0x01 /* active pull-up */ - --/* extra configurations - e.g. 1WS */ --static int extra_config; - - /** - * Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only). -@@ -130,6 +133,8 @@ struct ds2482_data { - */ - static inline u8 ds2482_calculate_config(u8 conf) - { -+ conf |= extra_config; -+ - if (ds2482_active_pullup) - conf |= DS2482_REG_CFG_APU; - -@@ -405,7 +410,7 @@ static u8 ds2482_w1_reset_bus(void *data - /* If the chip did reset since detect, re-config it */ - if (err & DS2482_REG_STS_RST) - ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, -- ds2482_calculate_config(extra_config)); -+ ds2482_calculate_config(0x00)); - } - - mutex_unlock(&pdev->access_lock); -@@ -431,7 +436,8 @@ static u8 ds2482_w1_set_pullup(void *dat - ds2482_wait_1wire_idle(pdev); - /* note: it seems like both SPU and APU have to be set! */ - retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, -- ds2482_calculate_config(extra_config|DS2482_REG_CFG_SPU|DS2482_REG_CFG_APU)); -+ ds2482_calculate_config(DS2482_REG_CFG_SPU | -+ DS2482_REG_CFG_APU)); - ds2482_wait_1wire_idle(pdev); - } - -@@ -484,7 +490,7 @@ static int ds2482_probe(struct i2c_clien - - /* Set all config items to 0 (off) */ - ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, -- ds2482_calculate_config(extra_config)); -+ ds2482_calculate_config(0x00)); - - mutex_init(&data->access_lock); - -@@ -559,7 +565,5 @@ module_i2c_driver(ds2482_driver); - - MODULE_AUTHOR("Ben Gardner "); - MODULE_DESCRIPTION("DS2482 driver"); --module_param(extra_config, int, S_IRUGO | S_IWUSR); --MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS"); - - MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.19/950-0494-bcmgenet-Better-coalescing-parameter-defaults.patch b/target/linux/brcm2708/patches-4.19/950-0494-bcmgenet-Better-coalescing-parameter-defaults.patch new file mode 100644 index 0000000000..e045886c78 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0494-bcmgenet-Better-coalescing-parameter-defaults.patch @@ -0,0 +1,43 @@ +From bb3075a2edb5c55d0ea7470da8bb44cc9f36aa02 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 27 Mar 2019 13:45:46 +0000 +Subject: [PATCH] bcmgenet: Better coalescing parameter defaults + +Set defaults for TX and RX packet coalescing to be equivalent to: + + # ethtool -C eth0 tx-frames 10 + # ethtool -C eth0 rx-usecs 50 + +This may be something we want to set via DT parameters in the +future. + +Signed-off-by: Phil Elwell +--- + drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c ++++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c +@@ -2147,7 +2147,7 @@ static void bcmgenet_init_tx_ring(struct + + bcmgenet_tdma_ring_writel(priv, index, 0, TDMA_PROD_INDEX); + bcmgenet_tdma_ring_writel(priv, index, 0, TDMA_CONS_INDEX); +- bcmgenet_tdma_ring_writel(priv, index, 1, DMA_MBUF_DONE_THRESH); ++ bcmgenet_tdma_ring_writel(priv, index, 10, DMA_MBUF_DONE_THRESH); + /* Disable rate control for now */ + bcmgenet_tdma_ring_writel(priv, index, flow_period_val, + TDMA_FLOW_PERIOD); +@@ -3576,9 +3576,12 @@ static int bcmgenet_probe(struct platfor + netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1); + + /* Set default coalescing parameters */ +- for (i = 0; i < priv->hw_params->rx_queues; i++) ++ for (i = 0; i < priv->hw_params->rx_queues; i++) { + priv->rx_rings[i].rx_max_coalesced_frames = 1; ++ priv->rx_rings[i].rx_coalesce_usecs = 50; ++ } + priv->rx_rings[DESC_INDEX].rx_max_coalesced_frames = 1; ++ priv->rx_rings[DESC_INDEX].rx_coalesce_usecs = 50; + + /* libphy will determine the link state */ + netif_carrier_off(dev); diff --git a/target/linux/brcm2708/patches-4.19/950-0494-sound-pcm512x-codec-Adding-352.8kHz-samplerate-suppo.patch b/target/linux/brcm2708/patches-4.19/950-0494-sound-pcm512x-codec-Adding-352.8kHz-samplerate-suppo.patch deleted file mode 100644 index 1c58b9cd93..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0494-sound-pcm512x-codec-Adding-352.8kHz-samplerate-suppo.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 2c1e36e477550ea66824433c132fdff03b4ee020 Mon Sep 17 00:00:00 2001 -From: Klaus Schulz -Date: Thu, 16 May 2019 13:35:32 +0200 -Subject: [PATCH 494/806] sound: pcm512x-codec: Adding 352.8kHz samplerate - support - ---- - sound/soc/codecs/pcm512x.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/sound/soc/codecs/pcm512x.c -+++ b/sound/soc/codecs/pcm512x.c -@@ -542,7 +542,7 @@ static unsigned long pcm512x_ncp_target( - - static const u32 pcm512x_dai_rates[] = { - 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, -- 88200, 96000, 176400, 192000, 384000, -+ 88200, 96000, 176400, 192000, 352800, 384000, - }; - - static const struct snd_pcm_hw_constraint_list constraints_slave = { diff --git a/target/linux/brcm2708/patches-4.19/950-0495-ASoC-decommissioning-driver-for-3Dlab-Nano-soundcard.patch b/target/linux/brcm2708/patches-4.19/950-0495-ASoC-decommissioning-driver-for-3Dlab-Nano-soundcard.patch deleted file mode 100644 index e33173a557..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0495-ASoC-decommissioning-driver-for-3Dlab-Nano-soundcard.patch +++ /dev/null @@ -1,500 +0,0 @@ -From 3150326498ba9388b85e5af2c8fcfeafc46eeaad Mon Sep 17 00:00:00 2001 -From: GT -Date: Sat, 6 Apr 2019 21:16:39 +0100 -Subject: [PATCH 495/806] ASoC: decommissioning driver for 3Dlab Nano soundcard - ---- - .../overlays/3dlab-nano-player-overlay.dts | 32 -- - arch/arm/boot/dts/overlays/Makefile | 1 - - arch/arm/boot/dts/overlays/README | 6 - - sound/soc/bcm/3dlab-nano-player.c | 370 ------------------ - sound/soc/bcm/Kconfig | 6 - - sound/soc/bcm/Makefile | 6 +- - 8 files changed, 2 insertions(+), 421 deletions(-) - delete mode 100644 arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts - delete mode 100644 sound/soc/bcm/3dlab-nano-player.c - ---- a/arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts -+++ /dev/null -@@ -1,32 +0,0 @@ --// Definitions for 3Dlab Nano Player --/dts-v1/; --/plugin/; -- --/ { -- compatible = "brcm,bcm2708"; -- -- fragment@0 { -- target = <&i2s>; -- __overlay__ { -- status = "okay"; -- }; -- }; -- -- fragment@1 { -- target = <&i2c>; -- __overlay__ { -- #address-cells = <1>; -- #size-cells = <0>; -- status = "okay"; -- -- nano-player@41 { -- compatible = "3dlab,nano-player"; -- reg = <0x41>; -- i2s-controller = <&i2s>; -- status = "okay"; -- }; -- }; -- }; --}; -- --// EOF ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -1,7 +1,6 @@ - # Overlays for the Raspberry Pi platform - - dtbo-$(CONFIG_ARCH_BCM2835) += \ -- 3dlab-nano-player.dtbo \ - adau1977-adc.dtbo \ - adau7002-simple.dtbo \ - ads1015.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -205,12 +205,6 @@ Params: - and the other i2c baudrate parameters. - - --Name: 3dlab-nano-player --Info: Configures the 3Dlab Nano Player --Load: dtoverlay=3dlab-nano-player --Params: -- -- - Name: adau1977-adc - Info: Overlay for activation of ADAU1977 ADC codec over I2C for control - and I2S for data. ---- a/sound/soc/bcm/3dlab-nano-player.c -+++ /dev/null -@@ -1,370 +0,0 @@ --/* -- * 3Dlab Nano Player ALSA SoC Audio driver. -- * -- * Copyright (C) 2018 3Dlab. -- * -- * Author: GT -- * -- * This program is free software; you can redistribute it and/or -- * modify it under the terms of the GNU General Public License -- * version 2 as published by the Free Software Foundation. -- * -- * This program is distributed in the hope that it will be useful, but -- * WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -- * General Public License for more details. -- */ -- --#include --#include --#include --#include --#include --#include -- --#define NANO_ID 0x00 --#define NANO_VER 0x01 --#define NANO_CFG 0x02 --#define NANO_STATUS 0x03 --#define NANO_SPI_ADDR 0x04 --#define NANO_SPI_DATA 0x05 -- --#define NANO_ID_VAL 0x3D --#define NANO_CFG_OFF 0x00 --#define NANO_CFG_MULT1 0 --#define NANO_CFG_MULT2 1 --#define NANO_CFG_MULT4 2 --#define NANO_CFG_MULT8 3 --#define NANO_CFG_MULT16 4 --#define NANO_CFG_CLK22 0 --#define NANO_CFG_CLK24 BIT(3) --#define NANO_CFG_DSD BIT(4) --#define NANO_CFG_ENA BIT(5) --#define NANO_CFG_BLINK BIT(6) --#define NANO_STATUS_P1 BIT(0) --#define NANO_STATUS_P2 BIT(1) --#define NANO_STATUS_FLG BIT(2) --#define NANO_STATUS_CLK BIT(3) --#define NANO_SPI_READ 0 --#define NANO_SPI_WRITE BIT(5) -- --#define NANO_DAC_CTRL1 0x00 --#define NANO_DAC_CTRL2 0x01 --#define NANO_DAC_CTRL3 0x02 --#define NANO_DAC_LATT 0x03 --#define NANO_DAC_RATT 0x04 -- --#define NANO_CTRL2_VAL 0x22 -- --static int nano_player_spi_write(struct regmap *map, -- unsigned int reg, unsigned int val) --{ -- /* indirect register access */ -- regmap_write(map, NANO_SPI_DATA, val); -- regmap_write(map, NANO_SPI_ADDR, reg | NANO_SPI_WRITE); -- return 0; --} -- --static int nano_player_ctrl_info(struct snd_kcontrol *kcontrol, -- struct snd_ctl_elem_info *uinfo) --{ -- /* describe control element */ -- if (strstr(kcontrol->id.name, "Volume")) { -- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; -- uinfo->count = 1; -- uinfo->value.integer.min = 0; -- uinfo->value.integer.max = 100; -- } else { -- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; -- uinfo->count = 1; -- uinfo->value.integer.min = 0; -- uinfo->value.integer.max = 1; -- } -- -- return 0; --} -- --static int nano_player_ctrl_put(struct snd_kcontrol *kcontrol, -- struct snd_ctl_elem_value *ucontrol) --{ -- /* program control value to hardware */ -- struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -- struct regmap *regmap = snd_soc_card_get_drvdata(card); -- -- if (strstr(kcontrol->id.name, "Volume")) { -- unsigned int vol = ucontrol->value.integer.value[0]; -- unsigned int att = 255 - (2 * (100 - vol)); -- -- nano_player_spi_write(regmap, NANO_DAC_LATT, att); -- nano_player_spi_write(regmap, NANO_DAC_RATT, att); -- kcontrol->private_value = vol; -- } else { -- unsigned int mute = ucontrol->value.integer.value[0]; -- unsigned int reg = NANO_CTRL2_VAL | mute; -- -- nano_player_spi_write(regmap, NANO_DAC_CTRL2, reg); -- kcontrol->private_value = mute; -- } -- return 0; --} -- --static int nano_player_ctrl_get(struct snd_kcontrol *kcontrol, -- struct snd_ctl_elem_value *ucontrol) --{ -- /* return last programmed value */ -- ucontrol->value.integer.value[0] = kcontrol->private_value; -- return 0; --} -- --#define SOC_NANO_PLAYER_CTRL(xname) \ --{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ -- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \ -- .info = nano_player_ctrl_info, \ -- .put = nano_player_ctrl_put, \ -- .get = nano_player_ctrl_get } -- --static const struct snd_kcontrol_new nano_player_controls[] = { -- SOC_NANO_PLAYER_CTRL("Master Playback Volume"), -- SOC_NANO_PLAYER_CTRL("Master Playback Switch"), --}; -- --static const unsigned int nano_player_rates[] = { -- 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000, -- 705600, 768000 /* only possible with fast clocks */ --}; -- --static struct snd_pcm_hw_constraint_list nano_player_constraint_rates = { -- .list = nano_player_rates, -- .count = ARRAY_SIZE(nano_player_rates), --}; -- --static int nano_player_init(struct snd_soc_pcm_runtime *rtd) --{ -- struct snd_soc_card *card = rtd->card; -- struct regmap *regmap = snd_soc_card_get_drvdata(card); -- struct snd_soc_pcm_stream *cpu = &rtd->cpu_dai->driver->playback; -- struct snd_soc_pcm_stream *codec = &rtd->codec_dai->driver->playback; -- unsigned int sample_bits = 32; -- unsigned int val; -- -- /* configure cpu dai */ -- cpu->formats |= SNDRV_PCM_FMTBIT_DSD_U32_LE; -- cpu->rate_max = 768000; -- -- /* configure dummy codec dai */ -- codec->rate_min = 44100; -- codec->rates = SNDRV_PCM_RATE_KNOT; -- codec->formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_DSD_U32_LE; -- -- /* configure max supported rate */ -- regmap_read(regmap, NANO_STATUS, &val); -- if (val & NANO_STATUS_CLK) { -- dev_notice(card->dev, "Board with fast clocks installed\n"); -- codec->rate_max = 768000; -- } else { -- dev_notice(card->dev, "Board with normal clocks installed\n"); -- codec->rate_max = 384000; -- } -- -- /* frame length enforced by hardware */ -- return snd_soc_dai_set_bclk_ratio(rtd->cpu_dai, sample_bits * 2); --} -- --static int nano_player_startup(struct snd_pcm_substream *substream) --{ -- return snd_pcm_hw_constraint_list(substream->runtime, 0, -- SNDRV_PCM_HW_PARAM_RATE, -- &nano_player_constraint_rates); --} -- --static int nano_player_hw_params(struct snd_pcm_substream *substream, -- struct snd_pcm_hw_params *params) --{ -- struct snd_soc_pcm_runtime *rtd = substream->private_data; -- struct snd_soc_card *card = rtd->card; -- struct regmap *regmap = snd_soc_card_get_drvdata(card); -- unsigned int config = NANO_CFG_ENA; -- struct snd_mask *fmt; -- -- /* configure PCM or DSD */ -- fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); -- if (snd_mask_test(fmt, SNDRV_PCM_FORMAT_DSD_U32_LE)) { -- /* embed DSD in PCM data */ -- snd_mask_none(fmt); -- snd_mask_set(fmt, SNDRV_PCM_FORMAT_S32_LE); -- /* enable DSD mode */ -- config |= NANO_CFG_DSD; -- } -- -- /* configure clocks */ -- switch (params_rate(params)) { -- case 44100: -- config |= NANO_CFG_MULT1 | NANO_CFG_CLK22; -- break; -- case 88200: -- config |= NANO_CFG_MULT2 | NANO_CFG_CLK22; -- break; -- case 176400: -- config |= NANO_CFG_MULT4 | NANO_CFG_CLK22; -- break; -- case 352800: -- config |= NANO_CFG_MULT8 | NANO_CFG_CLK22; -- break; -- case 705600: -- config |= NANO_CFG_MULT16 | NANO_CFG_CLK22; -- break; -- case 48000: -- config |= NANO_CFG_MULT1 | NANO_CFG_CLK24; -- break; -- case 96000: -- config |= NANO_CFG_MULT2 | NANO_CFG_CLK24; -- break; -- case 192000: -- config |= NANO_CFG_MULT4 | NANO_CFG_CLK24; -- break; -- case 384000: -- config |= NANO_CFG_MULT8 | NANO_CFG_CLK24; -- break; -- case 768000: -- config |= NANO_CFG_MULT16 | NANO_CFG_CLK24; -- break; -- default: -- return -EINVAL; -- } -- -- dev_dbg(card->dev, "Send CFG register 0x%02X\n", config); -- return regmap_write(regmap, NANO_CFG, config); --} -- --static struct snd_soc_ops nano_player_ops = { -- .startup = nano_player_startup, -- .hw_params = nano_player_hw_params, --}; -- --static struct snd_soc_dai_link nano_player_link = { -- .name = "3Dlab Nano Player", -- .stream_name = "3Dlab Nano Player HiFi", -- .platform_name = "bcm2708-i2s.0", -- .cpu_dai_name = "bcm2708-i2s.0", -- .codec_name = "snd-soc-dummy", -- .codec_dai_name = "snd-soc-dummy-dai", -- .dai_fmt = SND_SOC_DAIFMT_I2S | -- SND_SOC_DAIFMT_CONT | -- SND_SOC_DAIFMT_NB_NF | -- SND_SOC_DAIFMT_CBM_CFM, -- .init = nano_player_init, -- .ops = &nano_player_ops, --}; -- --static const struct regmap_config nano_player_regmap = { -- .reg_bits = 8, -- .val_bits = 8, -- .max_register = 128, -- .cache_type = REGCACHE_RBTREE, --}; -- --static int nano_player_card_probe(struct snd_soc_card *card) --{ -- struct regmap *regmap = snd_soc_card_get_drvdata(card); -- unsigned int val; -- -- /* check hardware integrity */ -- regmap_read(regmap, NANO_ID, &val); -- if (val != NANO_ID_VAL) { -- dev_err(card->dev, "Invalid ID register 0x%02X\n", val); -- return -ENODEV; -- } -- -- /* report version to the user */ -- regmap_read(regmap, NANO_VER, &val); -- dev_notice(card->dev, "Started 3Dlab Nano Player driver (v%d)\n", val); -- -- /* enable internal audio bus and blink status LED */ -- return regmap_write(regmap, NANO_CFG, NANO_CFG_ENA | NANO_CFG_BLINK); --} -- --static int nano_player_card_remove(struct snd_soc_card *card) --{ -- /* disable internal audio bus */ -- struct regmap *regmap = snd_soc_card_get_drvdata(card); -- -- return regmap_write(regmap, NANO_CFG, NANO_CFG_OFF); --} -- --static struct snd_soc_card nano_player_card = { -- .name = "3Dlab_Nano_Player", -- .owner = THIS_MODULE, -- .dai_link = &nano_player_link, -- .num_links = 1, -- .controls = nano_player_controls, -- .num_controls = ARRAY_SIZE(nano_player_controls), -- .probe = nano_player_card_probe, -- .remove = nano_player_card_remove, --}; -- --static int nano_player_i2c_probe(struct i2c_client *i2c, -- const struct i2c_device_id *id) --{ -- struct regmap *regmap; -- int ret; -- -- regmap = devm_regmap_init_i2c(i2c, &nano_player_regmap); -- if (IS_ERR(regmap)) { -- ret = PTR_ERR(regmap); -- dev_err(&i2c->dev, "Failed to init regmap %d\n", ret); -- return ret; -- } -- -- if (i2c->dev.of_node) { -- struct snd_soc_dai_link *dai = &nano_player_link; -- struct device_node *node; -- -- /* cpu handle configured by device tree */ -- node = of_parse_phandle(i2c->dev.of_node, "i2s-controller", 0); -- if (node) { -- dai->platform_name = NULL; -- dai->platform_of_node = node; -- dai->cpu_dai_name = NULL; -- dai->cpu_of_node = node; -- } -- } -- -- nano_player_card.dev = &i2c->dev; -- snd_soc_card_set_drvdata(&nano_player_card, regmap); -- ret = devm_snd_soc_register_card(&i2c->dev, &nano_player_card); -- -- if (ret && ret != -EPROBE_DEFER) -- dev_err(&i2c->dev, "Failed to register card %d\n", ret); -- -- return ret; --} -- --static const struct of_device_id nano_player_of_match[] = { -- { .compatible = "3dlab,nano-player", }, -- { } --}; --MODULE_DEVICE_TABLE(of, nano_player_of_match); -- --static const struct i2c_device_id nano_player_i2c_id[] = { -- { "nano-player", 0 }, -- { } --}; --MODULE_DEVICE_TABLE(i2c, nano_player_i2c_id); -- --static struct i2c_driver nano_player_i2c_driver = { -- .probe = nano_player_i2c_probe, -- .id_table = nano_player_i2c_id, -- .driver = { -- .name = "nano-player", -- .owner = THIS_MODULE, -- .of_match_table = nano_player_of_match, -- }, --}; -- --module_i2c_driver(nano_player_i2c_driver); -- --MODULE_DESCRIPTION("ASoC 3Dlab Nano Player driver"); --MODULE_AUTHOR("GT "); --MODULE_LICENSE("GPL v2"); -- --/* EOF */ ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -17,12 +17,6 @@ config SND_SOC_CYGNUS - - If you don't know what to do here, say N. - --config SND_BCM2708_SOC_3DLAB_NANO_PLAYER -- tristate "Support for 3Dlab Nano Player" -- depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -- help -- Say Y or M if you want to add support for 3Dlab Nano Player. -- - config SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD - tristate "Support for Google voiceHAT soundcard" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -12,7 +12,6 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- - snd-soc-googlevoicehat-codec-objs := googlevoicehat-codec.o - - # BCM2708 Machine Support --snd-soc-3dlab-nano-player-objs := 3dlab-nano-player.o - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o - snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o - snd-soc-justboom-dac-objs := justboom-dac.o -@@ -20,7 +19,7 @@ snd-soc-rpi-cirrus-objs := rpi-cirrus.o - snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-codec-objs := iqaudio-codec.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o -- snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o -+snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o - snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o - snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o - snd-soc-audiosense-pi-objs := audiosense-pi.o -@@ -36,7 +35,6 @@ snd-soc-fe-pi-audio-objs := fe-pi-audio. - snd-soc-rpi-simple-soundcard-objs := rpi-simple-soundcard.o - snd-soc-rpi-wm8804-soundcard-objs := rpi-wm8804-soundcard.o - --obj-$(CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER) += snd-soc-3dlab-nano-player.o - obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o -@@ -45,7 +43,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_CODEC) += snd-soc-iqaudio-codec.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o -- obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o -+obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o - obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o - obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o - obj-$(CONFIG_SND_AUDIOSENSE_PI) += snd-soc-audiosense-pi.o diff --git a/target/linux/brcm2708/patches-4.19/950-0495-net-genet-enable-link-energy-detect-powerdown-for-ex.patch b/target/linux/brcm2708/patches-4.19/950-0495-net-genet-enable-link-energy-detect-powerdown-for-ex.patch new file mode 100644 index 0000000000..2c0557b65b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0495-net-genet-enable-link-energy-detect-powerdown-for-ex.patch @@ -0,0 +1,31 @@ +From d8b59e9245f8b2a231eeaa35b4a42f30cdbd5304 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Tue, 14 May 2019 17:17:59 +0100 +Subject: [PATCH] net: genet: enable link energy detect powerdown for + external PHYs + +There are several warts surrounding bcmgenet_mii_probe() as this +function is called from ndo_open, but it's calling registration-type +functions. The probe should be called at probe time and refactored +such that the PHY device data can be extracted to limit the scope +of this flag to Broadcom PHYs. + +For now, pass this flag in as it puts our attached PHY into a low-power +state when disconnected. + +Signed-off-by: Jonathan Bell +--- + drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c ++++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c +@@ -318,6 +318,8 @@ int bcmgenet_mii_probe(struct net_device + /* Communicate the integrated PHY revision */ + if (priv->internal_phy) + phy_flags = priv->gphy_rev; ++ else ++ phy_flags = PHY_BRCM_AUTO_PWRDWN_ENABLE; + + /* Initialize link state variables that bcmgenet_mii_setup() uses */ + priv->old_link = -1; diff --git a/target/linux/brcm2708/patches-4.19/950-0496-.gitignore-Add-.dtbo-explicitly.patch b/target/linux/brcm2708/patches-4.19/950-0496-.gitignore-Add-.dtbo-explicitly.patch deleted file mode 100644 index 524c7d2361..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0496-.gitignore-Add-.dtbo-explicitly.patch +++ /dev/null @@ -1,22 +0,0 @@ -From bd4e0a6ad64c1211094776923bf61bd6ede3f043 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 21 May 2019 15:17:33 +0100 -Subject: [PATCH 496/806] .gitignore: Add *.dtbo explicitly - -Signed-off-by: popcornmix ---- - .gitignore | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/.gitignore -+++ b/.gitignore -@@ -15,7 +15,8 @@ - *.bin - *.bz2 - *.c.[012]*.* --*.dtb* -+*.dtb -+*.dtbo - *.dtb.S - *.dwo - *.elf diff --git a/target/linux/brcm2708/patches-4.19/950-0496-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch b/target/linux/brcm2708/patches-4.19/950-0496-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch new file mode 100644 index 0000000000..354cd08f22 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0496-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch @@ -0,0 +1,73 @@ +From 8eb54bbd5e6ebb929d390432163589f4c3dc0c14 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Tue, 14 May 2019 17:00:41 +0100 +Subject: [PATCH] phy: broadcom: split out the BCM54213PE from the + BCM54210E IDs + +The last nibble is a revision ID, and the 54213pe is a later rev +than the 54210e. Running the 54210e setup code on a 54213pe results +in a broken RGMII interface. + +Signed-off-by: Jonathan Bell +--- + drivers/net/phy/broadcom.c | 17 ++++++++++++++--- + include/linux/brcmphy.h | 1 + + 2 files changed, 15 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/broadcom.c ++++ b/drivers/net/phy/broadcom.c +@@ -222,7 +222,8 @@ static void bcm54xx_adjust_rxrefclk(stru + /* Abort if we are using an untested phy. */ + if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 && + BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 && +- BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M) ++ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M && ++ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54213PE) + return; + + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); +@@ -604,7 +605,7 @@ static struct phy_driver broadcom_driver + .config_intr = bcm_phy_config_intr, + }, { + .phy_id = PHY_ID_BCM54210E, +- .phy_id_mask = 0xfffffff0, ++ .phy_id_mask = 0xffffffff, + .name = "Broadcom BCM54210E", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, +@@ -612,6 +613,15 @@ static struct phy_driver broadcom_driver + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, + }, { ++ .phy_id = PHY_ID_BCM54213PE, ++ .phy_id_mask = 0xffffffff, ++ .name = "Broadcom BCM54213PE", ++ .features = PHY_GBIT_FEATURES, ++ .flags = PHY_HAS_INTERRUPT, ++ .config_init = bcm54xx_config_init, ++ .ack_interrupt = bcm_phy_ack_intr, ++ .config_intr = bcm_phy_config_intr, ++}, { + .phy_id = PHY_ID_BCM5461, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM5461", +@@ -748,7 +758,8 @@ module_phy_driver(broadcom_drivers); + static struct mdio_device_id __maybe_unused broadcom_tbl[] = { + { PHY_ID_BCM5411, 0xfffffff0 }, + { PHY_ID_BCM5421, 0xfffffff0 }, +- { PHY_ID_BCM54210E, 0xfffffff0 }, ++ { PHY_ID_BCM54210E, 0xffffffff }, ++ { PHY_ID_BCM54213PE, 0xffffffff }, + { PHY_ID_BCM5461, 0xfffffff0 }, + { PHY_ID_BCM54612E, 0xfffffff0 }, + { PHY_ID_BCM54616S, 0xfffffff0 }, +--- a/include/linux/brcmphy.h ++++ b/include/linux/brcmphy.h +@@ -20,6 +20,7 @@ + #define PHY_ID_BCM5411 0x00206070 + #define PHY_ID_BCM5421 0x002060e0 + #define PHY_ID_BCM54210E 0x600d84a0 ++#define PHY_ID_BCM54213PE 0x600d84a2 + #define PHY_ID_BCM5464 0x002060b0 + #define PHY_ID_BCM5461 0x002060c0 + #define PHY_ID_BCM54612E 0x03625e60 diff --git a/target/linux/brcm2708/patches-4.19/950-0497-Bluetooth-Check-key-sizes-only-when-Secure-Simple-Pa.patch b/target/linux/brcm2708/patches-4.19/950-0497-Bluetooth-Check-key-sizes-only-when-Secure-Simple-Pa.patch deleted file mode 100644 index d80b0e3551..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0497-Bluetooth-Check-key-sizes-only-when-Secure-Simple-Pa.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 83f0a8986ae42e33bc16acda0451dce2cf4dfb55 Mon Sep 17 00:00:00 2001 -From: Marcel Holtmann -Date: Wed, 22 May 2019 09:05:40 +0200 -Subject: [PATCH 497/806] Bluetooth: Check key sizes only when Secure Simple - Pairing is enabled - -The encryption is only mandatory to be enforced when both sides are using -Secure Simple Pairing and this means the key size check makes only sense -in that case. - -On legacy Bluetooth 2.0 and earlier devices like mice the encryption was -optional and thus causing an issue if the key size check is not bound to -using Secure Simple Pairing. - -Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections") -Signed-off-by: Marcel Holtmann -Cc: stable@vger.kernel.org ---- - net/bluetooth/hci_conn.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - ---- a/net/bluetooth/hci_conn.c -+++ b/net/bluetooth/hci_conn.c -@@ -1272,8 +1272,13 @@ int hci_conn_check_link_mode(struct hci_ - return 0; - } - -- if (hci_conn_ssp_enabled(conn) && -- !test_bit(HCI_CONN_ENCRYPT, &conn->flags)) -+ /* If Secure Simple Pairing is not enabled, then legacy connection -+ * setup is used and no encryption or key sizes can be enforced. -+ */ -+ if (!hci_conn_ssp_enabled(conn)) -+ return 1; -+ -+ if (!test_bit(HCI_CONN_ENCRYPT, &conn->flags)) - return 0; - - return 1; diff --git a/target/linux/brcm2708/patches-4.19/950-0497-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch b/target/linux/brcm2708/patches-4.19/950-0497-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch new file mode 100644 index 0000000000..15af5a7ca4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0497-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch @@ -0,0 +1,64 @@ +From dc2550fdfd0a46c3ec67e5003b3d69c29141406b Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Fri, 17 May 2019 13:31:21 +0100 +Subject: [PATCH] phy: bcm54213pe: configure the LED outputs to be more + user-friendly + +The default state was both LEDs indicating link speed. + +Change the default configuration to +- Amber: 1000/100 link speed indication +- Green: link present + activity indication + +Signed-off-by: Jonathan Bell +--- + drivers/net/phy/broadcom.c | 17 +++++++++++++++++ + include/linux/brcmphy.h | 4 ++++ + 2 files changed, 21 insertions(+) + +--- a/drivers/net/phy/broadcom.c ++++ b/drivers/net/phy/broadcom.c +@@ -52,6 +52,21 @@ static int bcm54210e_config_init(struct + return 0; + } + ++static void bcm54213pe_config_init(struct phy_device *phydev) ++{ ++ u16 val; ++ ++ /* Enable ACT+LINK indication on ACTIVITY trigger */ ++ val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_LEDCTL); ++ val |= BCM54XX_SHD_LEDCTL_ACTLINK_EN; ++ bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDCTL, val); ++ ++ /* Set ACTIVITY on LED "1" output, LINKSPD[1] on LED "3" output */ ++ val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) | ++ BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD1); ++ bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val); ++} ++ + static int bcm54612e_config_init(struct phy_device *phydev) + { + int reg; +@@ -310,6 +325,8 @@ static int bcm54xx_config_init(struct ph + err = bcm54210e_config_init(phydev); + if (err) + return err; ++ } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54213PE) { ++ bcm54213pe_config_init(phydev); + } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) { + err = bcm54612e_config_init(phydev); + if (err) +--- a/include/linux/brcmphy.h ++++ b/include/linux/brcmphy.h +@@ -168,6 +168,10 @@ + #define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002 + #define BCM54XX_SHD_SCR3_TRDDAPD 0x0004 + ++/* 01001: Additional LED trigger options */ ++#define BCM54XX_SHD_LEDCTL 0x09 ++#define BCM54XX_SHD_LEDCTL_ACTLINK_EN 0x0010 ++ + /* 01010: Auto Power-Down */ + #define BCM54XX_SHD_APD 0x0a + #define BCM_APD_CLR_MASK 0xFE9F /* clear bits 5, 6 & 8 */ diff --git a/target/linux/brcm2708/patches-4.19/950-0498-dwc_otg-Choose-appropriate-IRQ-handover-strategy.patch b/target/linux/brcm2708/patches-4.19/950-0498-dwc_otg-Choose-appropriate-IRQ-handover-strategy.patch new file mode 100644 index 0000000000..083e0c7f1e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0498-dwc_otg-Choose-appropriate-IRQ-handover-strategy.patch @@ -0,0 +1,181 @@ +From 856c8fdf68e589c89ed0518aab727c54fdff5afa Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 21 May 2019 13:36:52 +0100 +Subject: [PATCH] dwc_otg: Choose appropriate IRQ handover strategy + +2711 has no MPHI peripheral, but the ARM Control block can fake +interrupts. Use the size of the DTB "mphi" reg block to determine +which is required. + +Signed-off-by: Phil Elwell +--- + drivers/usb/host/dwc_otg/dwc_otg_driver.c | 9 +++-- + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 21 ++++++---- + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 2 + + drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 12 ++++-- + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 41 +++++++++++++------- + drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 3 ++ + 6 files changed, 60 insertions(+), 28 deletions(-) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c +@@ -806,14 +806,15 @@ static int dwc_otg_driver_probe( + if (!request_mem_region(_dev->resource[1].start, + _dev->resource[1].end - _dev->resource[1].start + 1, + "dwc_otg")) { +- dev_dbg(&_dev->dev, "error reserving mapped memory\n"); +- retval = -EFAULT; +- goto fail; +- } ++ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); ++ retval = -EFAULT; ++ goto fail; ++ } + + dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start, + _dev->resource[1].end - + _dev->resource[1].start + 1); ++ dwc_otg_device->os_dep.use_swirq = (_dev->resource[1].end - _dev->resource[1].start) == 0x200; + } + + #else +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +@@ -1347,8 +1347,12 @@ void notrace dwc_otg_fiq_fsm(struct fiq_ + /* We got an interrupt, didn't handle it. */ + if (kick_irq) { + state->mphi_int_count++; +- FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); +- FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); ++ if (state->mphi_regs.swirq_set) { ++ FIQ_WRITE(state->mphi_regs.swirq_set, 1); ++ } else { ++ FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); ++ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); ++ } + + } + state->fiq_done++; +@@ -1406,11 +1410,14 @@ void notrace dwc_otg_fiq_nop(struct fiq_ + state->mphi_int_count++; + gintmsk.d32 &= state->gintmsk_saved.d32; + FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); +- /* Force a clear before another dummy send */ +- FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); +- FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); +- FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); +- ++ if (state->mphi_regs.swirq_set) { ++ FIQ_WRITE(state->mphi_regs.swirq_set, 1); ++ } else { ++ /* Force a clear before another dummy send */ ++ FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); ++ FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); ++ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); ++ } + } + state->fiq_done++; + mb(); +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h +@@ -118,6 +118,8 @@ typedef struct { + volatile void* outdda; + volatile void* outddb; + volatile void* intstat; ++ volatile void* swirq_set; ++ volatile void* swirq_clr; + } mphi_regs_t; + + enum fiq_debug_level { +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +@@ -220,16 +220,20 @@ exit_handler_routine: + + /* The FIQ could have sneaked another interrupt in. If so, don't clear MPHI */ + if ((gintmsk_new.d32 == ~0) && (haintmsk_new.d32 == 0x0000FFFF)) { ++ if (dwc_otg_hcd->fiq_state->mphi_regs.swirq_clr) { ++ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.swirq_clr, 1); ++ } else { + DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.intstat, (1<<16)); +- if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) { +- fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR"); ++ } ++ if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) { ++ fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR"); + DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, ((1<<31) + (1<<16))); + while (!(DWC_READ_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & (1 << 17))) + ; + DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, (1<<31)); + dwc_otg_hcd->fiq_state->mphi_int_count = 0; +- } +- int_done++; ++ } ++ int_done++; + } + haintmsk.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); + /* Re-enable interrupts that the FIQ masked (first time round) */ +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -474,22 +474,37 @@ static void hcd_init_fiq(void *cookie) + set_fiq_regs(®s); + #endif + +- //Set the mphi periph to the required registers +- dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; +- dwc_otg_hcd->fiq_state->mphi_regs.ctrl = otg_dev->os_dep.mphi_base + 0x4c; +- dwc_otg_hcd->fiq_state->mphi_regs.outdda = otg_dev->os_dep.mphi_base + 0x28; +- dwc_otg_hcd->fiq_state->mphi_regs.outddb = otg_dev->os_dep.mphi_base + 0x2c; +- dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50; + dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base; +- DWC_WARN("MPHI regs_base at %px", dwc_otg_hcd->fiq_state->mphi_regs.base); +- //Enable mphi peripheral +- writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); ++ //Set the mphi periph to the required registers ++ dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; ++ if (otg_dev->os_dep.use_swirq) { ++ dwc_otg_hcd->fiq_state->mphi_regs.swirq_set = ++ otg_dev->os_dep.mphi_base + 0x1f0; ++ dwc_otg_hcd->fiq_state->mphi_regs.swirq_clr = ++ otg_dev->os_dep.mphi_base + 0x1f4; ++ DWC_WARN("Fake MPHI regs_base at 0x%08x", ++ (int)dwc_otg_hcd->fiq_state->mphi_regs.base); ++ } else { ++ dwc_otg_hcd->fiq_state->mphi_regs.ctrl = ++ otg_dev->os_dep.mphi_base + 0x4c; ++ dwc_otg_hcd->fiq_state->mphi_regs.outdda ++ = otg_dev->os_dep.mphi_base + 0x28; ++ dwc_otg_hcd->fiq_state->mphi_regs.outddb ++ = otg_dev->os_dep.mphi_base + 0x2c; ++ dwc_otg_hcd->fiq_state->mphi_regs.intstat ++ = otg_dev->os_dep.mphi_base + 0x50; ++ DWC_WARN("MPHI regs_base at %px", ++ dwc_otg_hcd->fiq_state->mphi_regs.base); ++ ++ //Enable mphi peripheral ++ writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); + #ifdef DEBUG +- if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000) +- DWC_WARN("MPHI periph has been enabled"); +- else +- DWC_WARN("MPHI periph has NOT been enabled"); ++ if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000) ++ DWC_WARN("MPHI periph has been enabled"); ++ else ++ DWC_WARN("MPHI periph has NOT been enabled"); + #endif ++ } + // Enable FIQ interrupt from USB peripheral + #ifdef CONFIG_ARM64 + irq = otg_dev->os_dep.fiq_num; +--- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +@@ -102,6 +102,9 @@ typedef struct os_dependent { + /** Base address for MPHI peripheral */ + void *mphi_base; + ++ /** mphi_base actually points to the SWIRQ block */ ++ bool use_swirq; ++ + /** IRQ number (<0 if not valid) */ + int irq_num; + diff --git a/target/linux/brcm2708/patches-4.19/950-0498-usb-dwc_otg-Clean-up-interrupt-claiming-code.patch b/target/linux/brcm2708/patches-4.19/950-0498-usb-dwc_otg-Clean-up-interrupt-claiming-code.patch deleted file mode 100644 index 3f6bb4e97d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0498-usb-dwc_otg-Clean-up-interrupt-claiming-code.patch +++ /dev/null @@ -1,157 +0,0 @@ -From efb54d0f0445f3d279a7eae7395b566c96d080de Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 7 May 2019 17:23:41 +0100 -Subject: [PATCH 498/806] usb: dwc_otg: Clean up interrupt claiming code - -The FIQ/IRQ interrupt number identification code is scattered through -the dwc_otg driver. Rationalise it, simplifying the code and solving -an existing issue. - -See: https://github.com/raspberrypi/linux/issues/2612 - -Signed-off-by: Phil Elwell ---- - drivers/usb/host/dwc_otg/dwc_otg_driver.c | 18 +++++++++----- - drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 10 +++----- - drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 6 +++++ - drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c | 26 +++----------------- - 4 files changed, 25 insertions(+), 35 deletions(-) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c -@@ -624,11 +624,7 @@ static int dwc_otg_driver_remove( - * Free the IRQ - */ - if (otg_dev->common_irq_installed) { --#ifdef PLATFORM_INTERFACE -- free_irq(platform_get_irq(_dev, 0), otg_dev); --#else -- free_irq(_dev->irq, otg_dev); --#endif -+ free_irq(otg_dev->os_dep.irq_num, otg_dev); - } else { - DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__); - return REM_RETVAL(-ENXIO); -@@ -905,7 +901,9 @@ static int dwc_otg_driver_probe( - */ - - #if defined(PLATFORM_INTERFACE) -- devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1); -+ devirq = platform_get_irq_byname(_dev, fiq_enable ? "soft" : "usb"); -+ if (devirq < 0) -+ devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1); - #else - devirq = _dev->irq; - #endif -@@ -922,6 +920,14 @@ static int dwc_otg_driver_probe( - } else { - dwc_otg_device->common_irq_installed = 1; - } -+ dwc_otg_device->os_dep.irq_num = devirq; -+ dwc_otg_device->os_dep.fiq_num = -EINVAL; -+ if (fiq_enable) { -+ int devfiq = platform_get_irq_byname(_dev, "usb"); -+ if (devfiq < 0) -+ devfiq = platform_get_irq(_dev, 1); -+ dwc_otg_device->os_dep.fiq_num = devfiq; -+ } - - #ifndef IRQF_TRIGGER_LOW - #if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -@@ -492,7 +492,7 @@ static void hcd_init_fiq(void *cookie) - #endif - // Enable FIQ interrupt from USB peripheral - #ifdef CONFIG_ARM64 -- irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); -+ irq = otg_dev->os_dep.fiq_num; - - if (irq < 0) { - DWC_ERROR("Can't get SIM-FIQ irq"); -@@ -509,7 +509,7 @@ static void hcd_init_fiq(void *cookie) - simfiq_irq = irq; - #else - #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER -- irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); -+ irq = otg_dev->os_dep.fiq_num; - #else - irq = INTERRUPT_VC_USB; - #endif -@@ -626,11 +626,7 @@ int hcd_init(dwc_bus_dev_t *_dev) - * allocates the DMA buffer pool, registers the USB bus, requests the - * IRQ line, and calls hcd_start method. - */ --#ifdef PLATFORM_INTERFACE -- retval = usb_add_hcd(hcd, platform_get_irq(_dev, fiq_enable ? 0 : 1), IRQF_SHARED); --#else -- retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED); --#endif -+ retval = usb_add_hcd(hcd, otg_dev->os_dep.irq_num, IRQF_SHARED); - if (retval < 0) { - goto error2; - } ---- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -@@ -102,6 +102,12 @@ typedef struct os_dependent { - /** Base address for MPHI peripheral */ - void *mphi_base; - -+ /** IRQ number (<0 if not valid) */ -+ int irq_num; -+ -+ /** FIQ number (<0 if not valid) */ -+ int fiq_num; -+ - #ifdef LM_INTERFACE - struct lm_device *lmdev; - #elif defined(PCI_INTERFACE) ---- a/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c -@@ -1224,30 +1224,16 @@ int pcd_init(dwc_bus_dev_t *_dev) - /* - * Setup interupt handler - */ --#ifdef PLATFORM_INTERFACE - DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", -- platform_get_irq(_dev, fiq_enable ? 0 : 1)); -- retval = request_irq(platform_get_irq(_dev, fiq_enable ? 0 : 1), dwc_otg_pcd_irq, -+ otg_dev->os_dep.irq_num); -+ retval = request_irq(otg_dev->os_dep.irq_num, dwc_otg_pcd_irq, - IRQF_SHARED, gadget_wrapper->gadget.name, - otg_dev->pcd); - if (retval != 0) { -- DWC_ERROR("request of irq%d failed\n", -- platform_get_irq(_dev, fiq_enable ? 0 : 1)); -+ DWC_ERROR("request of irq%d failed\n", otg_dev->os_dep.irq_num); - free_wrapper(gadget_wrapper); - return -EBUSY; - } --#else -- DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", -- _dev->irq); -- retval = request_irq(_dev->irq, dwc_otg_pcd_irq, -- IRQF_SHARED | IRQF_DISABLED, -- gadget_wrapper->gadget.name, otg_dev->pcd); -- if (retval != 0) { -- DWC_ERROR("request of irq%d failed\n", _dev->irq); -- free_wrapper(gadget_wrapper); -- return -EBUSY; -- } --#endif - - dwc_otg_pcd_start(gadget_wrapper->pcd, &fops); - -@@ -1267,11 +1253,7 @@ void pcd_remove(dwc_bus_dev_t *_dev) - /* - * Free the IRQ - */ --#ifdef PLATFORM_INTERFACE -- free_irq(platform_get_irq(_dev, 0), pcd); --#else -- free_irq(_dev->irq, pcd); --#endif -+ free_irq(otg_dev->os_dep.irq_num, pcd); - dwc_otg_pcd_remove(otg_dev->pcd); - free_wrapper(gadget_wrapper); - otg_dev->pcd = 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0499-overlays-Delete-the-deprecated-sdio-1bit-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0499-overlays-Delete-the-deprecated-sdio-1bit-overlay.patch deleted file mode 100644 index b9fa9fa7da..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0499-overlays-Delete-the-deprecated-sdio-1bit-overlay.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 5edb8789ba5f9694698386683f2e4e97c70e765a Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 7 May 2019 14:27:35 +0100 -Subject: [PATCH 499/806] overlays: Delete the deprecated sdio-1bit overlay - -Use dtoverlay=sdio,bus_width=1,gpios_22_25 instead. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 1 - - .../boot/dts/overlays/sdio-1bit-overlay.dts | 63 ------------------- - 2 files changed, 64 deletions(-) - delete mode 100644 arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -126,7 +126,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - sc16is752-spi1.dtbo \ - sdhost.dtbo \ - sdio.dtbo \ -- sdio-1bit.dtbo \ - sdtweak.dtbo \ - smi.dtbo \ - smi-dev.dtbo \ ---- a/arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts -+++ /dev/null -@@ -1,63 +0,0 @@ --/dts-v1/; --/plugin/; -- --/* Enable 1-bit SDIO from MMC interface via GPIOs 22-25. Includes sdhost overlay. */ -- --/{ -- compatible = "brcm,bcm2708"; -- -- fragment@0 { -- target = <&mmc>; -- __overlay__ { -- status = "disabled"; -- }; -- }; -- -- fragment@1 { -- target = <&soc>; -- __overlay__ { -- #address-cells = <1>; -- #size-cells = <1>; -- -- sdio_1bit: sdio@7e300000 { -- compatible = "brcm,bcm2835-mmc", -- "brcm,bcm2835-sdhci"; -- reg = <0x7e300000 0x100>; -- interrupts = <2 30>; -- clocks = <&clocks 28/*BCM2835_CLOCK_EMMC*/>; -- dmas = <&dma 11>; -- dma-names = "rx-tx"; -- brcm,overclock-50 = <0>; -- status = "okay"; -- pinctrl-names = "default"; -- pinctrl-0 = <&sdio_1bit_pins>; -- non-removable; -- bus-width = <1>; -- }; -- }; -- }; -- -- fragment@2 { -- target = <&gpio>; -- __overlay__ { -- sdio_1bit_pins: sdio_1bit_pins { -- brcm,pins = <22 23 24 25>; -- brcm,function = <7>; /* ALT3 = SD1 */ -- brcm,pull = <0 2 2 2>; -- }; -- }; -- }; -- -- fragment@3 { -- target-path = "/aliases"; -- __overlay__ { -- mmc1 = "/soc/sdio@7e300000"; -- }; -- }; -- -- -- __overrides__ { -- poll_once = <&sdio_1bit>,"non-removable?"; -- sdio_overclock = <&sdio_1bit>,"brcm,overclock-50:0"; -- }; --}; diff --git a/target/linux/brcm2708/patches-4.19/950-0499-usb-xhci-Disable-the-XHCI-5-second-timeout.patch b/target/linux/brcm2708/patches-4.19/950-0499-usb-xhci-Disable-the-XHCI-5-second-timeout.patch new file mode 100644 index 0000000000..abc576d690 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0499-usb-xhci-Disable-the-XHCI-5-second-timeout.patch @@ -0,0 +1,29 @@ +From ff7222c0771a5e28666335663571058e560ad32b Mon Sep 17 00:00:00 2001 +From: Tim Gover +Date: Fri, 22 Mar 2019 09:47:14 +0000 +Subject: [PATCH] usb: xhci: Disable the XHCI 5 second timeout + +If the VL805 EEPROM has not been programmed then boot will hang for five +seconds. The timeout seems to be arbitrary and is an unecessary +delay on the first boot. Remove the timeout. + +This is common code and probably can't be upstreamed unless the timeout +can be configurable somehow or perhaps the XHCI driver can be skipped +on the first boot. +--- + drivers/usb/host/xhci.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/usb/host/xhci.c ++++ b/drivers/usb/host/xhci.c +@@ -196,8 +196,9 @@ int xhci_reset(struct xhci_hcd *xhci) + if (xhci->quirks & XHCI_INTEL_HOST) + udelay(1000); + ++ // Hack: reduce handshake timeout from 10s 0.5s due to unprogrammed vl805 + ret = xhci_handshake(&xhci->op_regs->command, +- CMD_RESET, 0, 10 * 1000 * 1000); ++ CMD_RESET, 0, 500 * 1000); + if (ret) + return ret; + diff --git a/target/linux/brcm2708/patches-4.19/950-0500-overlays-Remove-upstream-aux-interrupt-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0500-overlays-Remove-upstream-aux-interrupt-overlay.patch deleted file mode 100644 index e44967a9c6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0500-overlays-Remove-upstream-aux-interrupt-overlay.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 2b584d25f295e07ef58efc2a60057be58015d693 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 7 May 2019 10:06:04 +0100 -Subject: [PATCH 500/806] overlays: Remove upstream-aux-interrupt overlay - -We no longer have a downstream-specific auxilliary interrupt -driver, so the overlay to disable it is no longer needed. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 1 - - arch/arm/boot/dts/overlays/README | 12 +++---- - .../upstream-aux-interrupt-overlay.dts | 33 ------------------- - .../boot/dts/overlays/upstream-overlay.dts | 2 +- - 4 files changed, 6 insertions(+), 42 deletions(-) - delete mode 100644 arch/arm/boot/dts/overlays/upstream-aux-interrupt-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -151,7 +151,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - uart1.dtbo \ - udrc.dtbo \ - upstream.dtbo \ -- upstream-aux-interrupt.dtbo \ - vc4-fkms-v3d.dtbo \ - vc4-kms-kippah-7inch.dtbo \ - vc4-kms-v3d.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -2206,18 +2206,16 @@ Params: alsaname Name of - - - Name: upstream --Info: Allow usage of downstream .dtb with upstream kernel. Comprises -- vc4-kms-v3d, dwc2 and upstream-aux-interrupt overlays. -+Info: Allow usage of downstream .dtb with upstream kernel. Comprises the -+ vc4-kms-v3d and dwc2 overlays. - Load: dtoverlay=upstream - Params: - - - Name: upstream-aux-interrupt --Info: Allow usage of downstream .dtb with upstream kernel by binding AUX -- devices directly to the shared AUX interrupt line. One of the parts -- of the 'upstream' overlay --Load: dtoverlay=upstream-aux-interrupt --Params: -+Info: This overlay has been deprecated and removed because it is no longer -+ necessary. -+Load: - - - Name: vc4-fkms-v3d ---- a/arch/arm/boot/dts/overlays/upstream-aux-interrupt-overlay.dts -+++ /dev/null -@@ -1,33 +0,0 @@ --// Overlay for missing AUX interrupt controller --// Instead we bind all AUX devices to the generic AUX interrupt line --/dts-v1/; --/plugin/; -- --/ { -- compatible = "brcm,bcm2708"; -- -- fragment@0 { -- target = <&uart1>; -- __overlay__ { -- interrupt-parent = <&intc>; -- interrupts = <0x1 0x1d>; -- }; -- }; -- -- fragment@1 { -- target = <&spi1>; -- __overlay__ { -- interrupt-parent = <&intc>; -- interrupts = <0x1 0x1d>; -- }; -- }; -- -- fragment@2 { -- target = <&spi2>; -- __overlay__ { -- interrupt-parent = <&intc>; -- interrupts = <0x1 0x1d>; -- }; -- }; --}; -- ---- a/arch/arm/boot/dts/overlays/upstream-overlay.dts -+++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts -@@ -1,4 +1,4 @@ --// redo: ovmerge -c vc4-kms-v3d-overlay.dts,cma-96 dwc2-overlay.dts,dr_mode=otg upstream-aux-interrupt-overlay.dts, -+// redo: ovmerge -c vc4-kms-v3d-overlay.dts,cma-96 dwc2-overlay.dts,dr_mode=otg - - /dts-v1/; - /plugin/; diff --git a/target/linux/brcm2708/patches-4.19/950-0500-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch b/target/linux/brcm2708/patches-4.19/950-0500-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch new file mode 100644 index 0000000000..239e142eda --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0500-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch @@ -0,0 +1,23 @@ +From 94a960e8933fb94b979f88c319aa54c304004b35 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 23 May 2019 15:08:30 +0100 +Subject: [PATCH] usb: xhci: Show that the VIA VL805 supports LPM + +Signed-off-by: Phil Elwell +--- + drivers/usb/host/xhci-pci.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/usb/host/xhci-pci.c ++++ b/drivers/usb/host/xhci-pci.c +@@ -222,6 +222,10 @@ static void xhci_pci_quirks(struct devic + pdev->device == 0x3432) + xhci->quirks |= XHCI_BROKEN_STREAMS; + ++ if (pdev->vendor == PCI_VENDOR_ID_VIA && ++ pdev->device == 0x3483) ++ xhci->quirks |= XHCI_LPM_SUPPORT; ++ + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == 0x1042) + xhci->quirks |= XHCI_BROKEN_STREAMS; diff --git a/target/linux/brcm2708/patches-4.19/950-0501-overlays-Standardise-on-compatible-brcm-bcm2835.patch b/target/linux/brcm2708/patches-4.19/950-0501-overlays-Standardise-on-compatible-brcm-bcm2835.patch deleted file mode 100644 index 1a49b1ff44..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0501-overlays-Standardise-on-compatible-brcm-bcm2835.patch +++ /dev/null @@ -1,1767 +0,0 @@ -From ba6646d6bc62108f33a7a3e95367534a0a634beb Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 14 May 2019 13:33:05 +0100 -Subject: [PATCH 501/806] overlays: Standardise on compatible="brcm,bcm2835" - -Curb the proliferation of compatible string combinations by -standardising on "brcm,bcm2835" to denote BCM2835 and its descendants. - -As nothing in the firmware or kernel is checking overlay compatible -strings, this should be a purely cosmetic change. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/ads1015-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/ads1115-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/ads7846-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/adv7282m-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/adv728x-m-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts | 2 +- - .../boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/allo-digione-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts | 2 +- - .../boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts | 2 +- - .../dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/applepi-dac-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/at86rf233-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts | 2 +- - .../boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/audremap-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/balena-fin-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/dht11-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/dpi18-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/dpi24-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/draws-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/dwc-otg-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/dwc2-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/enc28j60-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/exc3000-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/goodix-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/gpio-fan-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/gpio-ir-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/gpio-key-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/hy28a-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/hy28b-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c-mux-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/ilitek251x-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts | 2 +- - .../arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/justboom-dac-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/justboom-digi-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/max98357a-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mbed-dac-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mcp23s17-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mcp3008-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mcp3202-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mcp342x-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/media-center-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mmc-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mpu6050-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/mz61581-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/ov5647-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/papirus-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pibell-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/piglow-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/piscreen-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/piscreen2r-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pisound-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pitft22-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pps-gpio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/qca7000-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rpi-dac-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rpi-display-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rpi-poe-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rpi-proto-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rpi-sense-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/rpi-tv-overlay.dts | 2 +- - .../arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/sdhost-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/sdio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/sdtweak-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/smi-nand-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/smi-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi-rtc-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi0-cs-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/ssd1306-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/superaudioboard-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/sx150x-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/tc358743-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/tinylcd35-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/uart0-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/uart1-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/udrc-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/upstream-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/vga666-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/w1-gpio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/wittypi-overlay.dts | 2 +- - 146 files changed, 146 insertions(+), 146 deletions(-) - ---- a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c>; ---- a/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts -+++ b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/ads1015-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ads1015-overlay.dts -@@ -5,7 +5,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - /* ----------- ADS1015 ------------ */ - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/ads1115-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ads1115-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/ads7846-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ads7846-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -+++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_vc>; ---- a/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts -+++ b/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts -@@ -5,7 +5,7 @@ - #include "adv7282m-overlay.dts" - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - // Fragment numbers deliberately high to avoid conflicts with the - // included adv7282m overlay file. ---- a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts -+++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; ---- a/arch/arm/boot/dts/overlays/allo-digione-overlay.dts -+++ b/arch/arm/boot/dts/overlays/allo-digione-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts -@@ -13,7 +13,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts -+++ b/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sound>; ---- a/arch/arm/boot/dts/overlays/at86rf233-overlay.dts -+++ b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts -@@ -4,7 +4,7 @@ - /* Overlay for Atmel AT86RF233 IEEE 802.15.4 WPAN transceiver on spi0.0 */ - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts -+++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts -+++ b/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts -@@ -5,7 +5,7 @@ - #include - - / { -- compatible = "brcm,bcm2837", "brcm,bcm2836", "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/audremap-overlay.dts -+++ b/arch/arm/boot/dts/overlays/audremap-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&audio_pins>; ---- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&mmc>; ---- a/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts -+++ b/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/dht11-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dht11-overlay.dts -@@ -5,7 +5,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts -@@ -8,7 +8,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts -@@ -9,7 +9,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sound>; ---- a/arch/arm/boot/dts/overlays/dpi18-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - // There is no DPI driver module, but we need a platform device - // node (that doesn't already use pinctrl) to hang the pinctrl ---- a/arch/arm/boot/dts/overlays/dpi24-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - // There is no DPI driver module, but we need a platform device - // node (that doesn't already use pinctrl) to hang the pinctrl ---- a/arch/arm/boot/dts/overlays/draws-overlay.dts -+++ b/arch/arm/boot/dts/overlays/draws-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - fragment@0 { - target = <&i2s>; - __overlay__ { ---- a/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&usb>; ---- a/arch/arm/boot/dts/overlays/dwc2-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&usb>; ---- a/arch/arm/boot/dts/overlays/enc28j60-overlay.dts -+++ b/arch/arm/boot/dts/overlays/enc28j60-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts -+++ b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi2>; ---- a/arch/arm/boot/dts/overlays/exc3000-overlay.dts -+++ b/arch/arm/boot/dts/overlays/exc3000-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&clocks>; ---- a/arch/arm/boot/dts/overlays/goodix-overlay.dts -+++ b/arch/arm/boot/dts/overlays/goodix-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts -+++ b/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts -+++ b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts -@@ -38,7 +38,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts -+++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts -+++ b/arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/gpio-key-overlay.dts -+++ b/arch/arm/boot/dts/overlays/gpio-key-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - // Configure the gpio pin controller ---- a/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts -+++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts -+++ b/arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts -@@ -10,7 +10,7 @@ - // note that GPIO3 has an external pullup on at least some boards). - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - // Configure the gpio pin controller ---- a/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; ---- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; ---- a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/hy28a-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hy28a-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/hy28b-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hy28b-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sound>; ---- a/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts -@@ -9,7 +9,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c0>; ---- a/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts -@@ -9,7 +9,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; ---- a/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s_pins>; ---- a/arch/arm/boot/dts/overlays/ilitek251x-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ilitek251x-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts -+++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts -+++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts -+++ b/arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts -@@ -13,7 +13,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - // disable spi-dev on spi0.0 - fragment@0 { ---- a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts -+++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/max98357a-overlay.dts -+++ b/arch/arm/boot/dts/overlays/max98357a-overlay.dts -@@ -8,7 +8,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - /* Enable I2S */ - fragment@0 { ---- a/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; ---- a/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts -@@ -20,7 +20,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - // disable spi-dev on spi0.0 - fragment@0 { ---- a/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - /* disable spi-dev for spi0.0 */ - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - /* disable spi-dev for spi0.1 */ - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/mcp3008-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; ---- a/arch/arm/boot/dts/overlays/mcp3202-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp3202-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; ---- a/arch/arm/boot/dts/overlays/mcp342x-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp342x-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; ---- a/arch/arm/boot/dts/overlays/media-center-overlay.dts -+++ b/arch/arm/boot/dts/overlays/media-center-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/mmc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&mmc>; ---- a/arch/arm/boot/dts/overlays/mpu6050-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mpu6050-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; ---- a/arch/arm/boot/dts/overlays/mz61581-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mz61581-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_vc>; ---- a/arch/arm/boot/dts/overlays/papirus-overlay.dts -+++ b/arch/arm/boot/dts/overlays/papirus-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts -@@ -11,7 +11,7 @@ - */ - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&act_led>; ---- a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts -@@ -9,7 +9,7 @@ - */ - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&uart1>; ---- a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&mmc>; ---- a/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts -@@ -16,7 +16,7 @@ - */ - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&uart0>; ---- a/arch/arm/boot/dts/overlays/pibell-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pibell-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/piglow-overlay.dts -+++ b/arch/arm/boot/dts/overlays/piglow-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/piscreen-overlay.dts -+++ b/arch/arm/boot/dts/overlays/piscreen-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts -+++ b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/pisound-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts -@@ -23,7 +23,7 @@ - #include - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/pitft22-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pitft22-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - fragment@0 { - target-path = "/"; - __overlay__ { ---- a/arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/qca7000-overlay.dts -+++ b/arch/arm/boot/dts/overlays/qca7000-overlay.dts -@@ -5,7 +5,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; ---- a/arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts -@@ -6,7 +6,7 @@ - #include - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/rpi-display-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -@@ -5,7 +5,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; ---- a/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; ---- a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; ---- a/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/sdhost-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts -@@ -4,7 +4,7 @@ - /* Provide backwards compatible aliases for the old sdhost dtparams. */ - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sdhost>; ---- a/arch/arm/boot/dts/overlays/sdio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts -@@ -4,7 +4,7 @@ - /* Enable SDIO from MMC interface via GPIOs 22-27. Includes sdhost overlay. */ - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&mmc>; ---- a/arch/arm/boot/dts/overlays/sdtweak-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts -@@ -4,7 +4,7 @@ - /* Provide backwards compatible aliases for the old sdhost dtparams. */ - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sdhost>; ---- a/arch/arm/boot/dts/overlays/smi-nand-overlay.dts -+++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&smi>; ---- a/arch/arm/boot/dts/overlays/smi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/smi-overlay.dts -@@ -5,7 +5,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&smi>; ---- a/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; ---- a/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts -@@ -3,7 +3,7 @@ - - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0_cs_pins>; ---- a/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts -@@ -3,7 +3,7 @@ - - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts -@@ -3,7 +3,7 @@ - - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts -@@ -3,7 +3,7 @@ - - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts -@@ -3,7 +3,7 @@ - - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts -@@ -3,7 +3,7 @@ - - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts -+++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts -@@ -3,7 +3,7 @@ - - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; ---- a/arch/arm/boot/dts/overlays/ssd1306-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ssd1306-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2718"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; ---- a/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts -+++ b/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sound>; ---- a/arch/arm/boot/dts/overlays/sx150x-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sx150x-overlay.dts -@@ -22,7 +22,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - // Enable I2C#0 interface - fragment@0 { ---- a/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts -@@ -5,7 +5,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/tc358743-overlay.dts -+++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts -@@ -4,7 +4,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_vc>; ---- a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts -+++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts -@@ -24,7 +24,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts -+++ b/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts -@@ -8,7 +8,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; ---- a/arch/arm/boot/dts/overlays/uart0-overlay.dts -+++ b/arch/arm/boot/dts/overlays/uart0-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&uart0>; ---- a/arch/arm/boot/dts/overlays/uart1-overlay.dts -+++ b/arch/arm/boot/dts/overlays/uart1-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&uart1>; ---- a/arch/arm/boot/dts/overlays/udrc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/udrc-overlay.dts -@@ -7,7 +7,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - fragment@0 { - target = <&i2s>; - __overlay__ { ---- a/arch/arm/boot/dts/overlays/upstream-overlay.dts -+++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts -@@ -6,7 +6,7 @@ - #include - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - fragment@0 { - target-path = "/chosen"; - __dormant__ { ---- a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts -@@ -6,7 +6,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/chosen"; ---- a/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts -@@ -8,7 +8,7 @@ - #include - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -@@ -8,7 +8,7 @@ - #include - - / { -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/chosen"; ---- a/arch/arm/boot/dts/overlays/vga666-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vga666-overlay.dts -@@ -2,7 +2,7 @@ - /plugin/; - - /{ -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - // There is no VGA driver module, but we need a platform device - // node (that doesn't already use pinctrl) to hang the pinctrl ---- a/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts -+++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; ---- a/arch/arm/boot/dts/overlays/wittypi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/wittypi-overlay.dts -@@ -8,7 +8,7 @@ - - / { - -- compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&leds>; diff --git a/target/linux/brcm2708/patches-4.19/950-0501-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.mousep.patch b/target/linux/brcm2708/patches-4.19/950-0501-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.mousep.patch new file mode 100644 index 0000000000..c48d16db91 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0501-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.mousep.patch @@ -0,0 +1,122 @@ +From fa776ef749c924cd3ff3ffa257d7a63a27224399 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Thu, 30 May 2019 10:38:40 +0100 +Subject: [PATCH] usb: xhci: hack xhci_urb_enqueue to support + hid.mousepoll behaviour + +xHCI creates endpoint contexts directly from the device's endpoint +data, so submitting URBs with urb->interval different from the hardware +interval has no effect. + +Add an explicit reconfiguration of the endpoint context when requested, +which will happen only when the interval is different from the cached +value. In practice, the reconfiguration only happens on the first URB +submitted for the endpoint. + +Signed-off-by: Jonathan Bell +--- + drivers/usb/host/xhci.c | 86 +++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 86 insertions(+) + +--- a/drivers/usb/host/xhci.c ++++ b/drivers/usb/host/xhci.c +@@ -1425,6 +1425,87 @@ command_cleanup: + } + + /* ++ * RPI: Fixup endpoint intervals when requested ++ * - Check interval versus the (cached) endpoint context ++ * - set the endpoint interval to the new value ++ * - force an endpoint configure command ++ */ ++static void xhci_fixup_interval(struct xhci_hcd *xhci, struct urb *urb, ++ unsigned int slot_id, unsigned int ep_index) ++{ ++ struct xhci_ep_ctx *ep_ctx_out, *ep_ctx_in; ++ struct xhci_command *command; ++ struct xhci_input_control_ctx *ctrl_ctx; ++ struct xhci_virt_device *vdev; ++ int xhci_interval, ep_interval; ++ int ret; ++ unsigned long flags; ++ u32 ep_info_tmp; ++ ++ spin_lock_irqsave(&xhci->lock, flags); ++ ++ vdev = xhci->devs[slot_id]; ++ /* Get context-derived endpoint interval */ ++ ep_ctx_out = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index); ++ ep_ctx_in = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index); ++ xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx_out->ep_info)); ++ ep_interval = urb->interval * 8; ++ ++ if (ep_interval == xhci_interval) { ++ spin_unlock_irqrestore(&xhci->lock, flags); ++ return; ++ } ++ ++ xhci_dbg(xhci, "Fixup interval ep_interval=%d xhci_interval=%d\n", ++ ep_interval, xhci_interval); ++ command = xhci_alloc_command_with_ctx(xhci, true, GFP_ATOMIC); ++ if (!command) { ++ /* Failure here is benign, poll at the original rate */ ++ spin_unlock_irqrestore(&xhci->lock, flags); ++ return; ++ } ++ ++ /* xHCI uses exponents for intervals... */ ++ xhci_interval = fls(ep_interval) - 1; ++ xhci_interval = clamp_val(xhci_interval, 3, 10); ++ ep_info_tmp = le32_to_cpu(ep_ctx_out->ep_info); ++ ep_info_tmp &= ~EP_INTERVAL(255); ++ ep_info_tmp |= EP_INTERVAL(xhci_interval); ++ ++ /* Keep the endpoint context up-to-date while issuing the command. */ ++ xhci_endpoint_copy(xhci, vdev->in_ctx, ++ vdev->out_ctx, ep_index); ++ ep_ctx_in->ep_info = cpu_to_le32(ep_info_tmp); ++ ++ /* ++ * We need to drop the lock, so take an explicit copy ++ * of the ep context. ++ */ ++ xhci_endpoint_copy(xhci, command->in_ctx, vdev->in_ctx, ep_index); ++ ++ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); ++ if (!ctrl_ctx) { ++ xhci_warn(xhci, ++ "%s: Could not get input context, bad type.\n", ++ __func__); ++ spin_unlock_irqrestore(&xhci->lock, flags); ++ xhci_free_command(xhci, command); ++ return; ++ } ++ ctrl_ctx->add_flags = xhci_get_endpoint_flag_from_index(ep_index); ++ ctrl_ctx->drop_flags = 0; ++ ++ spin_unlock_irqrestore(&xhci->lock, flags); ++ ++ ret = xhci_configure_endpoint(xhci, urb->dev, command, ++ false, false); ++ if (ret) ++ xhci_warn(xhci, "%s: Configure endpoint failed: %d\n", ++ __func__, ret); ++ xhci_free_command(xhci, command); ++} ++ ++/* + * non-error returns are a promise to giveback() the urb later + * we drop ownership so next owner (or urb unlink) can get it + */ +@@ -1492,6 +1573,11 @@ static int xhci_urb_enqueue(struct usb_h + } + } + ++ if (usb_endpoint_xfer_int(&urb->ep->desc) && ++ (urb->dev->speed == USB_SPEED_FULL || ++ urb->dev->speed == USB_SPEED_LOW)) ++ xhci_fixup_interval(xhci, urb, slot_id, ep_index); ++ + spin_lock_irqsave(&xhci->lock, flags); + + if (xhci->xhc_state & XHCI_STATE_DYING) { diff --git a/target/linux/brcm2708/patches-4.19/950-0502-pinctrl-bcm2835-Add-support-for-BCM2838.patch b/target/linux/brcm2708/patches-4.19/950-0502-pinctrl-bcm2835-Add-support-for-BCM2838.patch new file mode 100644 index 0000000000..cb4fc3b708 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0502-pinctrl-bcm2835-Add-support-for-BCM2838.patch @@ -0,0 +1,90 @@ +From 9fdab9bd6324314cbdfe96a6da5edef6c29ed5e6 Mon Sep 17 00:00:00 2001 +From: Tim Gover +Date: Wed, 9 Jan 2019 14:43:36 +0000 +Subject: [PATCH] pinctrl-bcm2835: Add support for BCM2838 + +GPIO configuration on BCM2838 is largely the same as BCM2835 except for +the pull up/down configuration. The old mechanism has been replaced +by new registers which don't require the fixed delay. + +Detect BCN2838 at run-time and use the new mechanism. Backwards +compatibility for the device-tree configuration has been retained. +--- + drivers/pinctrl/bcm/pinctrl-bcm2835.c | 58 ++++++++++++++++++++------- + 1 file changed, 44 insertions(+), 14 deletions(-) + +--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c ++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +@@ -67,6 +67,12 @@ + #define GPPUD 0x94 /* Pin Pull-up/down Enable */ + #define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */ + ++/* 2711 has a different mechanism for pin pull-up/down/enable */ ++#define GPPUPPDN0 0xe4 /* Pin pull-up/down for pins 15:0 */ ++#define GPPUPPDN1 0xe8 /* Pin pull-up/down for pins 31:16 */ ++#define GPPUPPDN2 0xec /* Pin pull-up/down for pins 47:32 */ ++#define GPPUPPDN3 0xf0 /* Pin pull-up/down for pins 57:48 */ ++ + #define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4)) + #define FSEL_SHIFT(p) (((p) % 10) * 3) + #define GPIO_REG_OFFSET(p) ((p) / 32) +@@ -915,21 +921,45 @@ static void bcm2835_pull_config_set(stru + unsigned int pin, unsigned int arg) + { + u32 off, bit; ++ /* BCM2835, BCM2836 & BCM2837 return 'gpio' for this unused register */ ++ int is_2835 = bcm2835_gpio_rd(pc, GPPUPPDN3) == 0x6770696f; + +- off = GPIO_REG_OFFSET(pin); +- bit = GPIO_REG_SHIFT(pin); +- +- bcm2835_gpio_wr(pc, GPPUD, arg & 3); +- /* +- * BCM2835 datasheet say to wait 150 cycles, but not of what. +- * But the VideoCore firmware delay for this operation +- * based nearly on the same amount of VPU cycles and this clock +- * runs at 250 MHz. +- */ +- udelay(1); +- bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); +- udelay(1); +- bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); ++ if (is_2835) { ++ off = GPIO_REG_OFFSET(pin); ++ bit = GPIO_REG_SHIFT(pin); ++ /* ++ * BCM2835 datasheet say to wait 150 cycles, but not of what. ++ * But the VideoCore firmware delay for this operation ++ * based nearly on the same amount of VPU cycles and this clock ++ * runs at 250 MHz. ++ */ ++ bcm2835_gpio_wr(pc, GPPUD, arg & 3); ++ udelay(1); ++ bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); ++ udelay(1); ++ bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); ++ } else { ++ u32 reg; ++ int lsb; ++ ++ off = (pin >> 4); ++ if (off > 3) ++ return; ++ lsb = (pin & 0xf) << 1; ++ ++ /* The up/down semantics are reversed compared to BCM2835. ++ * Instead of updating all the device tree files, translate the ++ * values here. ++ */ ++ if (arg == 2) ++ arg = 1; ++ else if (arg == 1) ++ arg = 2; ++ reg = bcm2835_gpio_rd(pc, GPPUPPDN0 + (off *4)); ++ reg &= ~(0x3 << lsb); ++ reg |= (arg & 3) << lsb; ++ bcm2835_gpio_wr(pc, GPPUPPDN0 + (off * 4), reg); ++ } + } + + static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev, diff --git a/target/linux/brcm2708/patches-4.19/950-0502-vc4-Remove-interrupt-and-DMA-trampling.patch b/target/linux/brcm2708/patches-4.19/950-0502-vc4-Remove-interrupt-and-DMA-trampling.patch deleted file mode 100644 index 8417a2ebdc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0502-vc4-Remove-interrupt-and-DMA-trampling.patch +++ /dev/null @@ -1,121 +0,0 @@ -From 343e24f4a112e1118e955fd58316e71b208a22f3 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 22 May 2019 12:58:47 +0100 -Subject: [PATCH 502/806] vc4: Remove interrupt and DMA trampling - -As part of the effort to clean up the overlays, remove the interrupt -and DMA mask declarations from the vc4 overlays which just duplicate -that which is in the base DTBs. - -Signed-off-by: Phil Elwell ---- - .../boot/dts/overlays/vc4-fkms-v3d-overlay.dts | 8 -------- - .../boot/dts/overlays/vc4-kms-v3d-overlay.dts | 18 ++---------------- - 2 files changed, 2 insertions(+), 24 deletions(-) - ---- a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts -@@ -60,7 +60,6 @@ - fragment@7 { - target = <&v3d>; - __overlay__ { -- interrupts = <1 10>; - status = "okay"; - }; - }; -@@ -72,13 +71,6 @@ - }; - }; - -- fragment@9 { -- target-path = "/soc/dma"; -- __overlay__ { -- brcm,dma-channel-mask = <0x7f35>; -- }; -- }; -- - __overrides__ { - cma-256 = <0>,"+0-1-2-3-4"; - cma-192 = <0>,"-0+1-2-3-4"; ---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -@@ -62,7 +62,6 @@ - fragment@7 { - target = <&pixelvalve0>; - __overlay__ { -- interrupts = <2 13>; /* pwa0 */ - status = "okay"; - }; - }; -@@ -70,7 +69,6 @@ - fragment@8 { - target = <&pixelvalve1>; - __overlay__ { -- interrupts = <2 14>; /* pwa1 */ - status = "okay"; - }; - }; -@@ -78,7 +76,6 @@ - fragment@9 { - target = <&pixelvalve2>; - __overlay__ { -- interrupts = <2 10>; /* pixelvalve */ - status = "okay"; - }; - }; -@@ -86,7 +83,6 @@ - fragment@10 { - target = <&hvs>; - __overlay__ { -- interrupts = <2 1>; - status = "okay"; - }; - }; -@@ -94,7 +90,6 @@ - fragment@11 { - target = <&hdmi>; - __overlay__ { -- interrupts = <2 8>, <2 9>; - status = "okay"; - }; - }; -@@ -102,7 +97,6 @@ - fragment@12 { - target = <&v3d>; - __overlay__ { -- interrupts = <1 10>; - status = "okay"; - }; - }; -@@ -115,14 +109,6 @@ - }; - - fragment@14 { -- target-path = "/soc/dma"; -- __overlay__ { -- brcm,dma-channel-mask = <0x7f35>; -- }; -- }; -- -- -- fragment@15 { - target = <&clocks>; - __overlay__ { - claim-clocks = < -@@ -134,14 +120,14 @@ - }; - }; - -- fragment@16 { -+ fragment@15 { - target = <&vec>; - __overlay__ { - status = "okay"; - }; - }; - -- fragment@17 { -+ fragment@16 { - target = <&txp>; - __overlay__ { - status = "okay"; diff --git a/target/linux/brcm2708/patches-4.19/950-0503-BCM270X_DT-Add-non-removable-clone-of-mmc-node.patch b/target/linux/brcm2708/patches-4.19/950-0503-BCM270X_DT-Add-non-removable-clone-of-mmc-node.patch deleted file mode 100644 index b4a0b4c9f0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0503-BCM270X_DT-Add-non-removable-clone-of-mmc-node.patch +++ /dev/null @@ -1,206 +0,0 @@ -From c63b13bddf317347ba0b69807c1591526d50ba47 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 7 May 2019 14:29:38 +0100 -Subject: [PATCH 503/806] BCM270X_DT: Add non-removable clone of mmc node - -non-removable is a boolean property, and as such can't be unset by an -overlay if it is set in a base DTB. Until now the workaround for this -problem has been for overlays to clone non-removable nodes without -the offending property, but this involves a lot of unnecessary -replication. Instead, add a clone of the mmc node with non-removable -already set to the base DTB, selecting the required version using -the status properties. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 4 +-- - arch/arm/boot/dts/bcm2708-rpi.dtsi | 3 +- - arch/arm/boot/dts/bcm270x.dtsi | 13 ++++++++ - arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 5 ++-- - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 5 ++-- - arch/arm/boot/dts/overlays/mmc-overlay.dts | 7 +++++ - arch/arm/boot/dts/overlays/sdio-overlay.dts | 33 +++++++-------------- - 7 files changed, 38 insertions(+), 32 deletions(-) - ---- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts -@@ -14,6 +14,7 @@ - aliases { - serial0 = &uart1; - serial1 = &uart0; -+ mmc1 = &mmcnr; - }; - }; - -@@ -73,10 +74,9 @@ - }; - }; - --&mmc { -+&mmcnr { - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; -- non-removable; - bus-width = <4>; - status = "okay"; - }; ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -118,7 +118,8 @@ - sd_force_pio = <&sdhost>,"brcm,force-pio?"; - sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; - sd_debug = <&sdhost>,"brcm,debug"; -- sdio_overclock = <&mmc>,"brcm,overclock-50:0"; -+ sdio_overclock = <&mmc>,"brcm,overclock-50:0", -+ <&mmcnr>,"brcm,overclock-50:0"; - axiperf = <&axiperf>,"status"; - }; - }; ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -79,6 +79,19 @@ - status = "disabled"; - }; - -+ /* A clone of mmc but with non-removable set */ -+ mmcnr: mmcnr@7e300000 { -+ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; -+ reg = <0x7e300000 0x100>; -+ interrupts = <2 30>; -+ clocks = <&clocks BCM2835_CLOCK_EMMC>; -+ dmas = <&dma 11>; -+ dma-names = "rx-tx"; -+ brcm,overclock-50 = <0>; -+ non-removable; -+ status = "disabled"; -+ }; -+ - hvs: hvs@7e400000 { - /* Add alias */ - status = "disabled"; ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -@@ -15,6 +15,7 @@ - aliases { - serial0 = &uart1; - serial1 = &uart0; -+ mmc1 = &mmcnr; - }; - }; - -@@ -74,13 +75,11 @@ - }; - }; - --&mmc { -+&mmcnr { - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; -- non-removable; - bus-width = <4>; - status = "okay"; -- brcm,overclock-50 = <0>; - }; - - &firmware { ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -15,6 +15,7 @@ - aliases { - serial0 = &uart1; - serial1 = &uart0; -+ mmc1 = &mmcnr; - }; - }; - -@@ -74,13 +75,11 @@ - }; - }; - --&mmc { -+&mmcnr { - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; -- non-removable; - bus-width = <4>; - status = "okay"; -- brcm,overclock-50 = <0>; - }; - - &soc { ---- a/arch/arm/boot/dts/overlays/mmc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts -@@ -33,6 +33,13 @@ - }; - }; - -+ fragment@3 { -+ target = <&mmcnr>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ - __overrides__ { - overclock_50 = <&frag0>,"brcm,overclock-50:0"; - }; ---- a/arch/arm/boot/dts/overlays/sdio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts -@@ -1,39 +1,26 @@ - /dts-v1/; - /plugin/; - --/* Enable SDIO from MMC interface via GPIOs 22-27. Includes sdhost overlay. */ -+/* Enable SDIO from MMC interface via various GPIO groups */ - - /{ - compatible = "brcm,bcm2835"; - - fragment@0 { -- target = <&mmc>; -+ target = <&mmcnr>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@1 { -- target = <&soc>; -- __overlay__ { -- #address-cells = <1>; -- #size-cells = <1>; -- -- sdio_ovl: sdio@7e300000 { -- compatible = "brcm,bcm2835-mmc", -- "brcm,bcm2835-sdhci"; -- reg = <0x7e300000 0x100>; -- interrupts = <2 30>; -- clocks = <&clocks 28/*BCM2835_CLOCK_EMMC*/>; -- dmas = <&dma 11>; -- dma-names = "rx-tx"; -- brcm,overclock-50 = <0>; -- status = "okay"; -- pinctrl-names = "default"; -- pinctrl-0 = <&sdio_ovl_pins>; -- non-removable; -- bus-width = <4>; -- }; -+ target = <&mmc>; -+ sdio_ovl: __overlay__ { -+ pinctrl-0 = <&sdio_ovl_pins>; -+ pinctrl-names = "default"; -+ non-removable; -+ bus-width = <4>; -+ status = "okay"; - }; - }; - -@@ -75,7 +62,7 @@ - fragment@6 { - target-path = "/aliases"; - __overlay__ { -- mmc1 = "/soc/sdio@7e300000"; -+ mmc1 = "/soc/mmc@7e300000"; - }; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0503-spi-bcm2835-enable-shared-interrupt-support.patch b/target/linux/brcm2708/patches-4.19/950-0503-spi-bcm2835-enable-shared-interrupt-support.patch new file mode 100644 index 0000000000..f929b3a969 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0503-spi-bcm2835-enable-shared-interrupt-support.patch @@ -0,0 +1,35 @@ +From 21dd7cd6dc231287b92a8c8b9ecf9d0844c2d325 Mon Sep 17 00:00:00 2001 +From: Martin Sperl +Date: Mon, 13 May 2019 11:05:27 +0000 +Subject: [PATCH] spi: bcm2835: enable shared interrupt support + +Add shared interrupt support for this driver. + +Signed-off-by: Martin Sperl +--- + drivers/spi/spi-bcm2835.c | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +--- a/drivers/spi/spi-bcm2835.c ++++ b/drivers/spi/spi-bcm2835.c +@@ -150,6 +150,10 @@ static irqreturn_t bcm2835_spi_interrupt + struct spi_master *master = dev_id; + struct bcm2835_spi *bs = spi_master_get_devdata(master); + ++ /* check if we got interrupt enabled */ ++ if (!(bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_INTR)) ++ return IRQ_NONE; ++ + /* Read as many bytes as possible from FIFO */ + bcm2835_rd_fifo(bs); + /* Write as many bytes as possible to FIFO */ +@@ -756,7 +760,8 @@ static int bcm2835_spi_probe(struct plat + bcm2835_wr(bs, BCM2835_SPI_CS, + BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); + +- err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0, ++ err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, ++ IRQF_SHARED, + dev_name(&pdev->dev), master); + if (err) { + dev_err(&pdev->dev, "could not request IRQ: %d\n", err); diff --git a/target/linux/brcm2708/patches-4.19/950-0504-BCM270X_DT-usb-Refactor-DTS-and-overlays.patch b/target/linux/brcm2708/patches-4.19/950-0504-BCM270X_DT-usb-Refactor-DTS-and-overlays.patch deleted file mode 100644 index 7e207842b3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0504-BCM270X_DT-usb-Refactor-DTS-and-overlays.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 61c44e24ea212b92bf6a420b94070ee6fc715811 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 8 May 2019 10:08:31 +0100 -Subject: [PATCH 504/806] BCM270X_DT: usb: Refactor DTS and overlays - -Move the IRQ interrupt declaration in the usb node before the FIQ -declaration, so that the dwc2 driver will find it. Name the -interrupts appropriately so that the dwc_otg driver can still find -them. Then remove the interrupt rewriting from the overlays. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm270x.dtsi | 6 ++++-- - arch/arm/boot/dts/overlays/dwc-otg-overlay.dts | 6 ------ - arch/arm/boot/dts/overlays/dwc2-overlay.dts | 2 -- - 3 files changed, 4 insertions(+), 10 deletions(-) - ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -131,8 +131,10 @@ - compatible = "brcm,bcm2708-usb"; - reg = <0x7e980000 0x10000>, - <0x7e006000 0x1000>; -- interrupts = <2 0>, -- <1 9>; -+ interrupt-names = "usb", -+ "soft"; -+ interrupts = <1 9>, -+ <2 0>; - }; - - v3d@7ec00000 { /* vd3 */ ---- a/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts -@@ -6,14 +6,8 @@ - - fragment@0 { - target = <&usb>; -- #address-cells = <1>; -- #size-cells = <1>; - __overlay__ { - compatible = "brcm,bcm2708-usb"; -- reg = <0x7e980000 0x10000>, -- <0x7e006000 0x1000>; -- interrupts = <2 0>, -- <1 9>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/dwc2-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts -@@ -10,8 +10,6 @@ - #size-cells = <1>; - dwc2_usb: __overlay__ { - compatible = "brcm,bcm2835-usb"; -- reg = <0x7e980000 0x10000>; -- interrupts = <1 9>; - dr_mode = "otg"; - g-np-tx-fifo-size = <32>; - g-rx-fifo-size = <256>; diff --git a/target/linux/brcm2708/patches-4.19/950-0504-drivers-char-add-chardev-for-mmap-ing-Argon-control-.patch b/target/linux/brcm2708/patches-4.19/950-0504-drivers-char-add-chardev-for-mmap-ing-Argon-control-.patch new file mode 100644 index 0000000000..fb358aa45f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0504-drivers-char-add-chardev-for-mmap-ing-Argon-control-.patch @@ -0,0 +1,320 @@ +From 0be0d6439128366a8d2ac0afaf88f19209171e51 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Thu, 9 May 2019 14:30:37 +0100 +Subject: [PATCH] drivers: char: add chardev for mmap'ing Argon control + registers + +Based on the gpiomem driver, allow mapping of the decoder register +spaces such that userspace can access control/status registers. +This driver is intended for use with a custom ffmpeg backend accelerator +prior to a v4l2 driver being written. + +Signed-off-by: Jonathan Bell +--- + drivers/char/broadcom/Kconfig | 8 + + drivers/char/broadcom/Makefile | 1 + + drivers/char/broadcom/argon-mem.c | 277 ++++++++++++++++++++++++++++++ + 3 files changed, 286 insertions(+) + create mode 100644 drivers/char/broadcom/argon-mem.c + +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -49,3 +49,11 @@ config BCM2835_SMI_DEV + This driver provides a character device interface (ioctl + read/write) to + Broadcom's Secondary Memory interface. The low-level functionality is provided + by the SMI driver itself. ++ ++config ARGON_MEM ++ tristate "Character device driver for the Argon decoder hardware" ++ default n ++ help ++ This driver provides a character device interface for memory-map operations ++ so userspace tools can access the control and status registers of the Argon ++ video decoder hardware. +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -4,3 +4,4 @@ obj-$(CONFIG_BCM_VC_SM) += vc_sm + + obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o + obj-$(CONFIG_BCM2835_SMI_DEV) += bcm2835_smi_dev.o ++obj-$(CONFIG_ARGON_MEM) += argon-mem.o +--- /dev/null ++++ b/drivers/char/broadcom/argon-mem.c +@@ -0,0 +1,277 @@ ++/** ++ * argon-mem.c - character device access to the Argon decoder registers ++ * ++ * Based on bcm2835-gpiomem.c. Provides IO memory access to the decoder ++ * register blocks such that ffmpeg plugins can access the hardware. ++ * ++ * Jonathan Bell ++ * Copyright (c) 2019, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "argon-mem" ++#define DEVICE_MINOR 0 ++ ++struct argon_mem_priv { ++ dev_t devid; ++ struct class *class; ++ struct cdev argon_mem_cdev; ++ unsigned long regs_phys; ++ unsigned long mem_window_len; ++ struct device *dev; ++ const char *name; ++}; ++ ++static int argon_mem_open(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ int ret = 0; ++ struct argon_mem_priv *priv; ++ if (dev != DEVICE_MINOR) ++ ret = -ENXIO; ++ ++ priv = container_of(inode->i_cdev, struct argon_mem_priv, ++ argon_mem_cdev); ++ if (!priv) ++ return -EINVAL; ++ file->private_data = priv; ++ return ret; ++} ++ ++static int argon_mem_release(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ int ret = 0; ++ ++ if (dev != DEVICE_MINOR) ++ ret = -ENXIO; ++ ++ return ret; ++} ++ ++static const struct vm_operations_struct argon_mem_vm_ops = { ++#ifdef CONFIG_HAVE_IOREMAP_PROT ++ .access = generic_access_phys ++#endif ++}; ++ ++static int argon_mem_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ struct argon_mem_priv *priv; ++ unsigned long pages; ++ ++ priv = file->private_data; ++ pages = priv->regs_phys >> PAGE_SHIFT; ++ /* ++ * The address decode is far larger than the actual number of registers. ++ * Just map the whole lot in. ++ */ ++ vma->vm_page_prot = phys_mem_access_prot(file, pages, ++ priv->mem_window_len, ++ vma->vm_page_prot); ++ vma->vm_ops = &argon_mem_vm_ops; ++ if (remap_pfn_range(vma, vma->vm_start, ++ pages, ++ priv->mem_window_len, ++ vma->vm_page_prot)) { ++ return -EAGAIN; ++ } ++ return 0; ++} ++ ++static const struct file_operations ++argon_mem_fops = { ++ .owner = THIS_MODULE, ++ .open = argon_mem_open, ++ .release = argon_mem_release, ++ .mmap = argon_mem_mmap, ++}; ++ ++static const struct of_device_id argon_mem_of_match[]; ++static int argon_mem_probe(struct platform_device *pdev) ++{ ++ int err; ++ void *ptr_err; ++ const struct of_device_id *id; ++ struct device *dev = &pdev->dev; ++ struct device *argon_mem_dev; ++ struct resource *ioresource; ++ struct argon_mem_priv *priv; ++ ++ ++ /* Allocate buffers and instance data */ ++ ++ priv = kzalloc(sizeof(struct argon_mem_priv), GFP_KERNEL); ++ ++ if (!priv) { ++ err = -ENOMEM; ++ goto failed_inst_alloc; ++ } ++ platform_set_drvdata(pdev, priv); ++ ++ priv->dev = dev; ++ id = of_match_device(argon_mem_of_match, dev); ++ if (!id) ++ return -EINVAL; ++ priv->name = id->data; ++ ++ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (ioresource) { ++ priv->regs_phys = ioresource->start; ++ priv->mem_window_len = ioresource->end - ioresource->start; ++ } else { ++ dev_err(priv->dev, "failed to get IO resource"); ++ err = -ENOENT; ++ goto failed_get_resource; ++ } ++ ++ /* Create character device entries */ ++ ++ err = alloc_chrdev_region(&priv->devid, ++ DEVICE_MINOR, 1, priv->name); ++ if (err != 0) { ++ dev_err(priv->dev, "unable to allocate device number"); ++ goto failed_alloc_chrdev; ++ } ++ cdev_init(&priv->argon_mem_cdev, &argon_mem_fops); ++ priv->argon_mem_cdev.owner = THIS_MODULE; ++ err = cdev_add(&priv->argon_mem_cdev, priv->devid, 1); ++ if (err != 0) { ++ dev_err(priv->dev, "unable to register device"); ++ goto failed_cdev_add; ++ } ++ ++ /* Create sysfs entries */ ++ ++ priv->class = class_create(THIS_MODULE, priv->name); ++ ptr_err = priv->class; ++ if (IS_ERR(ptr_err)) ++ goto failed_class_create; ++ ++ argon_mem_dev = device_create(priv->class, NULL, ++ priv->devid, NULL, ++ priv->name); ++ ptr_err = argon_mem_dev; ++ if (IS_ERR(ptr_err)) ++ goto failed_device_create; ++ ++ dev_info(priv->dev, "%s initialised: Registers at 0x%08lx length 0x%08lx", ++ priv->name, priv->regs_phys, priv->mem_window_len); ++ ++ return 0; ++ ++failed_device_create: ++ class_destroy(priv->class); ++failed_class_create: ++ cdev_del(&priv->argon_mem_cdev); ++ err = PTR_ERR(ptr_err); ++failed_cdev_add: ++ unregister_chrdev_region(priv->devid, 1); ++failed_alloc_chrdev: ++failed_get_resource: ++ kfree(priv); ++failed_inst_alloc: ++ dev_err(priv->dev, "could not load argon_mem"); ++ return err; ++} ++ ++static int argon_mem_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct argon_mem_priv *priv = platform_get_drvdata(pdev); ++ ++ device_destroy(priv->class, priv->devid); ++ class_destroy(priv->class); ++ cdev_del(&priv->argon_mem_cdev); ++ unregister_chrdev_region(priv->devid, 1); ++ kfree(priv); ++ ++ dev_info(dev, "%s driver removed - OK", priv->name); ++ return 0; ++} ++ ++static const char argon_hevc_name[] = "argon-hevcmem"; ++static const char argon_h264_name[] = "argon-h264mem"; ++static const char argon_vp9_name[] = "argon-vp9mem"; ++static const char argon_intc_name[] = "argon-intcmem"; ++ ++static const struct of_device_id argon_mem_of_match[] = { ++ { ++ .compatible = "raspberrypi,argon-hevc-decoder", ++ .data = &argon_hevc_name, ++ }, ++ { ++ .compatible = "raspberrypi,argon-h264-decoder", ++ .data = &argon_h264_name, ++ }, ++ { ++ .compatible = "raspberrypi,argon-vp9-decoder", ++ .data = &argon_vp9_name, ++ }, ++ /* The "intc" is included as this block of hardware contains the ++ * "frame done" status flags. ++ */ ++ { ++ .compatible = "raspberrypi,argon-local-intc", ++ .data = &argon_intc_name, ++ }, ++ { /* sentinel */ }, ++}; ++ ++MODULE_DEVICE_TABLE(of, argon_mem_of_match); ++ ++static struct platform_driver argon_mem_driver = { ++ .probe = argon_mem_probe, ++ .remove = argon_mem_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = argon_mem_of_match, ++ }, ++}; ++ ++module_platform_driver(argon_mem_driver); ++ ++MODULE_ALIAS("platform:argon-mem"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Driver for accessing Argon decoder registers from userspace"); ++MODULE_AUTHOR("Jonathan Bell "); diff --git a/target/linux/brcm2708/patches-4.19/950-0505-clk-bcm2835-Don-t-wait-for-pllh-lock.patch b/target/linux/brcm2708/patches-4.19/950-0505-clk-bcm2835-Don-t-wait-for-pllh-lock.patch new file mode 100644 index 0000000000..e8ab380b5d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0505-clk-bcm2835-Don-t-wait-for-pllh-lock.patch @@ -0,0 +1,38 @@ +From 3924edc9bd3c55d48c383c1046d75e163ce3cddb Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 23 Jan 2019 16:11:50 +0000 +Subject: [PATCH] clk-bcm2835: Don't wait for pllh lock + +Signed-off-by: Phil Elwell +--- + drivers/clk/bcm/clk-bcm2835.c | 18 ++++++++++-------- + 1 file changed, 10 insertions(+), 8 deletions(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -627,15 +627,17 @@ static int bcm2835_pll_on(struct clk_hw + spin_unlock(&cprman->regs_lock); + + /* Wait for the PLL to lock. */ +- timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); +- while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) { +- if (ktime_after(ktime_get(), timeout)) { +- dev_err(cprman->dev, "%s: couldn't lock PLL\n", +- clk_hw_get_name(hw)); +- return -ETIMEDOUT; +- } ++ if (strcmp(data->name, "pllh")) { ++ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); ++ while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) { ++ if (ktime_after(ktime_get(), timeout)) { ++ dev_err(cprman->dev, "%s: couldn't lock PLL\n", ++ clk_hw_get_name(hw)); ++ return -ETIMEDOUT; ++ } + +- cpu_relax(); ++ cpu_relax(); ++ } + } + + cprman_write(cprman, data->a2w_ctrl_reg, diff --git a/target/linux/brcm2708/patches-4.19/950-0505-overlays-Update-upstream-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0505-overlays-Update-upstream-overlay.patch deleted file mode 100644 index 066c6898d0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0505-overlays-Update-upstream-overlay.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 61c487e6a1985e52307d6df5834b610a50219819 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 22 May 2019 13:29:56 +0100 -Subject: [PATCH 505/806] overlays: Update upstream overlay - -The recent DT/overlay changes have had a corresponding effect on the -upstream overlay, which is a composite of the vc4-kms-v3d and dwc2 -overlays. - -Signed-off-by: Phil Elwell ---- - .../boot/dts/overlays/upstream-overlay.dts | 41 ++----------------- - 1 file changed, 3 insertions(+), 38 deletions(-) - ---- a/arch/arm/boot/dts/overlays/upstream-overlay.dts -+++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts -@@ -52,42 +52,36 @@ - fragment@7 { - target = <&pixelvalve0>; - __overlay__ { -- interrupts = <2 13>; - status = "okay"; - }; - }; - fragment@8 { - target = <&pixelvalve1>; - __overlay__ { -- interrupts = <2 14>; - status = "okay"; - }; - }; - fragment@9 { - target = <&pixelvalve2>; - __overlay__ { -- interrupts = <2 10>; - status = "okay"; - }; - }; - fragment@10 { - target = <&hvs>; - __overlay__ { -- interrupts = <2 1>; - status = "okay"; - }; - }; - fragment@11 { - target = <&hdmi>; - __overlay__ { -- interrupts = <2 8>, <2 9>; - status = "okay"; - }; - }; - fragment@12 { - target = <&v3d>; - __overlay__ { -- interrupts = <1 10>; - status = "okay"; - }; - }; -@@ -98,37 +92,29 @@ - }; - }; - fragment@14 { -- target-path = "/soc/dma"; -- __overlay__ { -- brcm,dma-channel-mask = <0x7f35>; -- }; -- }; -- fragment@15 { - target = <&clocks>; - __overlay__ { - claim-clocks = ; - }; - }; -- fragment@16 { -+ fragment@15 { - target = <&vec>; - __overlay__ { - status = "okay"; - }; - }; -- fragment@17 { -+ fragment@16 { - target = <&txp>; - __overlay__ { - status = "okay"; - }; - }; -- fragment@18 { -+ fragment@17 { - target = <&usb>; - #address-cells = <1>; - #size-cells = <1>; - dwc2_usb: __overlay__ { - compatible = "brcm,bcm2835-usb"; -- reg = <0x7e980000 0x10000>; -- interrupts = <1 9>; - dr_mode = "otg"; - g-np-tx-fifo-size = <32>; - g-rx-fifo-size = <256>; -@@ -136,25 +122,4 @@ - status = "okay"; - }; - }; -- fragment@19 { -- target = <&uart1>; -- __overlay__ { -- interrupt-parent = <&intc>; -- interrupts = <0x1 0x1d>; -- }; -- }; -- fragment@20 { -- target = <&spi1>; -- __overlay__ { -- interrupt-parent = <&intc>; -- interrupts = <0x1 0x1d>; -- }; -- }; -- fragment@21 { -- target = <&spi2>; -- __overlay__ { -- interrupt-parent = <&intc>; -- interrupts = <0x1 0x1d>; -- }; -- }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0506-bcm2835-pm-Move-bcm2835-watchdog-s-DT-probe-to-an-MF.patch b/target/linux/brcm2708/patches-4.19/950-0506-bcm2835-pm-Move-bcm2835-watchdog-s-DT-probe-to-an-MF.patch new file mode 100644 index 0000000000..ff15427b5c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0506-bcm2835-pm-Move-bcm2835-watchdog-s-DT-probe-to-an-MF.patch @@ -0,0 +1,200 @@ +From 90964ab2d00546a59086ffd08964da3d2a5cefc9 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 12 Dec 2018 15:51:47 -0800 +Subject: [PATCH] bcm2835-pm: Move bcm2835-watchdog's DT probe to an + MFD. + +The PM block that the wdt driver was binding to actually has multiple +features we want to expose (power domains, reset, watchdog). Move the +DT attachment to a MFD driver and make WDT probe against MFD. + +Signed-off-by: Eric Anholt +Reviewed-by: Guenter Roeck +Acked-by: Stefan Wahren +Signed-off-by: Stefan Wahren +(cherry picked from commit 5e6acc3e678ed3db746ab4fb53a980861cd711b6) +--- + drivers/mfd/Makefile | 1 + + drivers/mfd/bcm2835-pm.c | 64 ++++++++++++++++++++++++++++++++++ + drivers/watchdog/bcm2835_wdt.c | 26 +++++--------- + include/linux/mfd/bcm2835-pm.h | 13 +++++++ + 4 files changed, 87 insertions(+), 17 deletions(-) + create mode 100644 drivers/mfd/bcm2835-pm.c + create mode 100644 include/linux/mfd/bcm2835-pm.h + +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_88PM805) += 88pm805.o 8 + obj-$(CONFIG_MFD_ACT8945A) += act8945a.o + obj-$(CONFIG_MFD_SM501) += sm501.o + obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o ++obj-$(CONFIG_ARCH_BCM2835) += bcm2835-pm.o + obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o + obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o + cros_ec_core-objs := cros_ec.o +--- /dev/null ++++ b/drivers/mfd/bcm2835-pm.c +@@ -0,0 +1,64 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * PM MFD driver for Broadcom BCM2835 ++ * ++ * This driver binds to the PM block and creates the MFD device for ++ * the WDT driver. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static const struct mfd_cell bcm2835_pm_devs[] = { ++ { .name = "bcm2835-wdt" }, ++}; ++ ++static int bcm2835_pm_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ struct device *dev = &pdev->dev; ++ struct bcm2835_pm *pm; ++ ++ pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL); ++ if (!pm) ++ return -ENOMEM; ++ platform_set_drvdata(pdev, pm); ++ ++ pm->dev = dev; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ pm->base = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pm->base)) ++ return PTR_ERR(pm->base); ++ ++ return devm_mfd_add_devices(dev, -1, ++ bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs), ++ NULL, 0, NULL); ++} ++ ++static const struct of_device_id bcm2835_pm_of_match[] = { ++ { .compatible = "brcm,bcm2835-pm-wdt", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match); ++ ++static struct platform_driver bcm2835_pm_driver = { ++ .probe = bcm2835_pm_probe, ++ .driver = { ++ .name = "bcm2835-pm", ++ .of_match_table = bcm2835_pm_of_match, ++ }, ++}; ++module_platform_driver(bcm2835_pm_driver); ++ ++MODULE_AUTHOR("Eric Anholt "); ++MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM MFD"); ++MODULE_LICENSE("GPL"); +--- a/drivers/watchdog/bcm2835_wdt.c ++++ b/drivers/watchdog/bcm2835_wdt.c +@@ -12,6 +12,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -41,6 +42,8 @@ struct bcm2835_wdt { + spinlock_t lock; + }; + ++static struct bcm2835_wdt *bcm2835_power_off_wdt; ++ + static unsigned int heartbeat; + static bool nowayout = WATCHDOG_NOWAYOUT; + +@@ -163,10 +166,7 @@ static struct watchdog_device bcm2835_wd + */ + static void bcm2835_power_off(void) + { +- struct device_node *np = +- of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt"); +- struct platform_device *pdev = of_find_device_by_node(np); +- struct bcm2835_wdt *wdt = platform_get_drvdata(pdev); ++ struct bcm2835_wdt *wdt = bcm2835_power_off_wdt; + + /* Partition 63 tells the firmware that this is a halt */ + __bcm2835_restart(wdt, 63); +@@ -174,7 +174,7 @@ static void bcm2835_power_off(void) + + static int bcm2835_wdt_probe(struct platform_device *pdev) + { +- struct resource *res; ++ struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct bcm2835_wdt *wdt; + int err; +@@ -186,10 +186,7 @@ static int bcm2835_wdt_probe(struct plat + + spin_lock_init(&wdt->lock); + +- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- wdt->base = devm_ioremap_resource(dev, res); +- if (IS_ERR(wdt->base)) +- return PTR_ERR(wdt->base); ++ wdt->base = pm->base; + + watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt); + watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev); +@@ -216,8 +213,10 @@ static int bcm2835_wdt_probe(struct plat + return err; + } + +- if (pm_power_off == NULL) ++ if (pm_power_off == NULL) { + pm_power_off = bcm2835_power_off; ++ bcm2835_power_off_wdt = wdt; ++ } + + dev_info(dev, "Broadcom BCM2835 watchdog timer"); + return 0; +@@ -231,18 +230,11 @@ static int bcm2835_wdt_remove(struct pla + return 0; + } + +-static const struct of_device_id bcm2835_wdt_of_match[] = { +- { .compatible = "brcm,bcm2835-pm-wdt", }, +- {}, +-}; +-MODULE_DEVICE_TABLE(of, bcm2835_wdt_of_match); +- + static struct platform_driver bcm2835_wdt_driver = { + .probe = bcm2835_wdt_probe, + .remove = bcm2835_wdt_remove, + .driver = { + .name = "bcm2835-wdt", +- .of_match_table = bcm2835_wdt_of_match, + }, + }; + module_platform_driver(bcm2835_wdt_driver); +--- /dev/null ++++ b/include/linux/mfd/bcm2835-pm.h +@@ -0,0 +1,13 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ ++ ++#ifndef BCM2835_MFD_PM_H ++#define BCM2835_MFD_PM_H ++ ++#include ++ ++struct bcm2835_pm { ++ struct device *dev; ++ void __iomem *base; ++}; ++ ++#endif /* BCM2835_MFD_PM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0506-w1-ds2408-Fix-typo-after-49695ac46861-reset-on-outpu.patch b/target/linux/brcm2708/patches-4.19/950-0506-w1-ds2408-Fix-typo-after-49695ac46861-reset-on-outpu.patch deleted file mode 100644 index d7b3ed560d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0506-w1-ds2408-Fix-typo-after-49695ac46861-reset-on-outpu.patch +++ /dev/null @@ -1,31 +0,0 @@ -From f74fe07cab3e8816c029de25029b71c80004619c Mon Sep 17 00:00:00 2001 -From: Mariusz Bialonczyk -Date: Thu, 16 May 2019 14:39:21 +0200 -Subject: [PATCH 506/806] w1: ds2408: Fix typo after 49695ac46861 (reset on - output_write retry with readback) - -commit 6660a04feb7ef648e50c792e19084d675fa6f3a2 upstream. - -Fix a typo in commit: -49695ac46861 w1: ds2408: reset on output_write retry with readback - -Fixes: 49695ac46861 ("w1: ds2408: reset on output_write retry with readback") -Reported-by: Phil Elwell -Cc: Jean-Francois Dagenais -Signed-off-by: Mariusz Bialonczyk -Signed-off-by: Greg Kroah-Hartman ---- - drivers/w1/slaves/w1_ds2408.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/w1/slaves/w1_ds2408.c -+++ b/drivers/w1/slaves/w1_ds2408.c -@@ -138,7 +138,7 @@ static ssize_t status_control_read(struc - W1_F29_REG_CONTROL_AND_STATUS, buf); - } - --#ifdef fCONFIG_W1_SLAVE_DS2408_READBACK -+#ifdef CONFIG_W1_SLAVE_DS2408_READBACK - static bool optional_read_back_valid(struct w1_slave *sl, u8 expected) - { - u8 w1_buf[3]; diff --git a/target/linux/brcm2708/patches-4.19/950-0507-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch b/target/linux/brcm2708/patches-4.19/950-0507-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch deleted file mode 100644 index 1156325aa8..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0507-BCM270X_DT-Rename-Pi-Zero-W-DT-files.patch +++ /dev/null @@ -1,367 +0,0 @@ -From 9542646d9211ab4305beb75da97f61cc1968ae6c Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 28 May 2019 16:36:04 +0100 -Subject: [PATCH 507/806] BCM270X_DT: Rename Pi Zero W DT files - -The downtream Pi Zero W dts file uses the digit 0, whereas upstream -chose to spell it out - "zero-w". The firmware has, for a long time, -looked for bcm2708-rpi-zero-w.dtb first before falling back to the -numerical version. Therefore it is better to follow upstream and -make the switch to "bcm2708-rpi-zero-w". - -At the same time, remove some overrides that duplicate values -inherited from the shared .dtsi files. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/Makefile | 2 +- - .../boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} | 5 ----- - 2 files changed, 1 insertion(+), 6 deletions(-) - rename arch/arm/boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} (97%) - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -4,7 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2708-rpi-b.dtb \ - bcm2708-rpi-b-plus.dtb \ - bcm2708-rpi-cm.dtb \ -- bcm2708-rpi-0-w.dtb \ -+ bcm2708-rpi-zero-w.dtb \ - bcm2709-rpi-2-b.dtb \ - bcm2710-rpi-3-b.dtb \ - bcm2710-rpi-3-b-plus.dtb \ ---- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts -+++ /dev/null -@@ -1,167 +0,0 @@ --/dts-v1/; -- --#include "bcm2708.dtsi" --#include "bcm283x-rpi-csi1-2lane.dtsi" -- --/ { -- compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; -- model = "Raspberry Pi Zero W"; -- -- chosen { -- bootargs = "coherent_pool=1M 8250.nr_uarts=1"; -- }; -- -- aliases { -- serial0 = &uart1; -- serial1 = &uart0; -- mmc1 = &mmcnr; -- }; --}; -- --&gpio { -- spi0_pins: spi0_pins { -- brcm,pins = <9 10 11>; -- brcm,function = <4>; /* alt0 */ -- }; -- -- spi0_cs_pins: spi0_cs_pins { -- brcm,pins = <8 7>; -- brcm,function = <1>; /* output */ -- }; -- -- i2c0_pins: i2c0 { -- brcm,pins = <0 1>; -- brcm,function = <4>; -- }; -- -- i2c1_pins: i2c1 { -- brcm,pins = <2 3>; -- brcm,function = <4>; -- }; -- -- i2s_pins: i2s { -- brcm,pins = <18 19 20 21>; -- brcm,function = <4>; /* alt0 */ -- }; -- -- sdio_pins: sdio_pins { -- brcm,pins = <34 35 36 37 38 39>; -- brcm,function = <7>; /* ALT3 = SD1 */ -- brcm,pull = <0 2 2 2 2 2>; -- }; -- -- bt_pins: bt_pins { -- brcm,pins = <43>; -- brcm,function = <4>; /* alt0:GPCLK2 */ -- brcm,pull = <0>; /* none */ -- }; -- -- uart0_pins: uart0_pins { -- brcm,pins = <30 31 32 33>; -- brcm,function = <7>; /* alt3=UART0 */ -- brcm,pull = <2 0 0 2>; /* up none none up */ -- }; -- -- uart1_pins: uart1_pins { -- brcm,pins; -- brcm,function; -- brcm,pull; -- }; -- -- audio_pins: audio_pins { -- brcm,pins = <>; -- brcm,function = <>; -- }; --}; -- --&mmcnr { -- pinctrl-names = "default"; -- pinctrl-0 = <&sdio_pins>; -- bus-width = <4>; -- status = "okay"; --}; -- --&uart0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart0_pins &bt_pins>; -- status = "okay"; --}; -- --&uart1 { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart1_pins>; -- status = "okay"; --}; -- --&spi0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -- cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -- -- spidev0: spidev@0{ -- compatible = "spidev"; -- reg = <0>; /* CE0 */ -- #address-cells = <1>; -- #size-cells = <0>; -- spi-max-frequency = <125000000>; -- }; -- -- spidev1: spidev@1{ -- compatible = "spidev"; -- reg = <1>; /* CE1 */ -- #address-cells = <1>; -- #size-cells = <0>; -- spi-max-frequency = <125000000>; -- }; --}; -- --&i2c0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&i2c0_pins>; -- clock-frequency = <100000>; --}; -- --&i2c1 { -- pinctrl-names = "default"; -- pinctrl-0 = <&i2c1_pins>; -- clock-frequency = <100000>; --}; -- --&i2c2 { -- clock-frequency = <100000>; --}; -- --&i2s { -- #sound-dai-cells = <0>; -- pinctrl-names = "default"; -- pinctrl-0 = <&i2s_pins>; --}; -- --&random { -- status = "okay"; --}; -- --&leds { -- act_led: act { -- label = "led0"; -- linux,default-trigger = "mmc0"; -- gpios = <&gpio 47 0>; -- }; --}; -- --&hdmi { -- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; --}; -- --&audio { -- pinctrl-names = "default"; -- pinctrl-0 = <&audio_pins>; --}; -- --/ { -- __overrides__ { -- act_led_gpio = <&act_led>,"gpios:4"; -- act_led_activelow = <&act_led>,"gpios:8"; -- act_led_trigger = <&act_led>,"linux,default-trigger"; -- }; --}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts -@@ -0,0 +1,162 @@ -+/dts-v1/; -+ -+#include "bcm2708.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; -+ model = "Raspberry Pi Zero W"; -+ -+ chosen { -+ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; -+ }; -+ -+ aliases { -+ serial0 = &uart1; -+ serial1 = &uart0; -+ mmc1 = &mmcnr; -+ }; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ sdio_pins: sdio_pins { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,function = <7>; /* ALT3 = SD1 */ -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ bt_pins: bt_pins { -+ brcm,pins = <43>; -+ brcm,function = <4>; /* alt0:GPCLK2 */ -+ brcm,pull = <0>; /* none */ -+ }; -+ -+ uart0_pins: uart0_pins { -+ brcm,pins = <30 31 32 33>; -+ brcm,function = <7>; /* alt3=UART0 */ -+ brcm,pull = <2 0 0 2>; /* up none none up */ -+ }; -+ -+ uart1_pins: uart1_pins { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <>; -+ brcm,function = <>; -+ }; -+}; -+ -+&mmcnr { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins &bt_pins>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0507-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch b/target/linux/brcm2708/patches-4.19/950-0507-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch new file mode 100644 index 0000000000..229dbe520c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0507-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch @@ -0,0 +1,825 @@ +From fd8ca458728baabe9cae37836088a33c8642d420 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 12 Dec 2018 15:51:48 -0800 +Subject: [PATCH] soc: bcm: bcm2835-pm: Add support for power domains + under a new binding. + +This provides a free software alternative to raspberrypi-power.c's +firmware calls to manage power domains. It also exposes a reset line, +where previously the vc4 driver had to try to force power off the +domain in order to trigger a reset. + +Signed-off-by: Eric Anholt +Acked-by: Rob Herring +Acked-by: Stefan Wahren +Signed-off-by: Stefan Wahren +(cherry picked from commit 670c672608a1ffcbc7ac0f872734843593bb8b15) +--- + drivers/mfd/bcm2835-pm.c | 36 +- + drivers/soc/bcm/Kconfig | 11 + + drivers/soc/bcm/Makefile | 1 + + drivers/soc/bcm/bcm2835-power.c | 661 +++++++++++++++++++++++++++ + include/dt-bindings/soc/bcm2835-pm.h | 28 ++ + include/linux/mfd/bcm2835-pm.h | 1 + + 6 files changed, 734 insertions(+), 4 deletions(-) + create mode 100644 drivers/soc/bcm/bcm2835-power.c + create mode 100644 include/dt-bindings/soc/bcm2835-pm.h + +--- a/drivers/mfd/bcm2835-pm.c ++++ b/drivers/mfd/bcm2835-pm.c +@@ -3,7 +3,7 @@ + * PM MFD driver for Broadcom BCM2835 + * + * This driver binds to the PM block and creates the MFD device for +- * the WDT driver. ++ * the WDT and power drivers. + */ + + #include +@@ -21,11 +21,16 @@ static const struct mfd_cell bcm2835_pm_ + { .name = "bcm2835-wdt" }, + }; + ++static const struct mfd_cell bcm2835_power_devs[] = { ++ { .name = "bcm2835-power" }, ++}; ++ + static int bcm2835_pm_probe(struct platform_device *pdev) + { + struct resource *res; + struct device *dev = &pdev->dev; + struct bcm2835_pm *pm; ++ int ret; + + pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL); + if (!pm) +@@ -39,13 +44,36 @@ static int bcm2835_pm_probe(struct platf + if (IS_ERR(pm->base)) + return PTR_ERR(pm->base); + +- return devm_mfd_add_devices(dev, -1, +- bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs), +- NULL, 0, NULL); ++ ret = devm_mfd_add_devices(dev, -1, ++ bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs), ++ NULL, 0, NULL); ++ if (ret) ++ return ret; ++ ++ /* We'll use the presence of the AXI ASB regs in the ++ * bcm2835-pm binding as the key for whether we can reference ++ * the full PM register range and support power domains. ++ */ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ if (res) { ++ pm->asb = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pm->asb)) ++ return PTR_ERR(pm->asb); ++ ++ ret = devm_mfd_add_devices(dev, -1, ++ bcm2835_power_devs, ++ ARRAY_SIZE(bcm2835_power_devs), ++ NULL, 0, NULL); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; + } + + static const struct of_device_id bcm2835_pm_of_match[] = { + { .compatible = "brcm,bcm2835-pm-wdt", }, ++ { .compatible = "brcm,bcm2835-pm", }, + {}, + }; + MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match); +--- a/drivers/soc/bcm/Kconfig ++++ b/drivers/soc/bcm/Kconfig +@@ -1,5 +1,16 @@ + menu "Broadcom SoC drivers" + ++config BCM2835_POWER ++ bool "BCM2835 power domain driver" ++ depends on ARCH_BCM2835 || (COMPILE_TEST && OF) ++ select PM_GENERIC_DOMAINS if PM ++ select RESET_CONTROLLER ++ help ++ This enables support for the BCM2835 power domains and reset ++ controller. Any usage of power domains by the Raspberry Pi ++ firmware means that Linux usage of the same power domain ++ must be accessed using the RASPBERRYPI_POWER driver ++ + config RASPBERRYPI_POWER + bool "Raspberry Pi power domain driver" + depends on ARCH_BCM2835 || (COMPILE_TEST && OF) +--- a/drivers/soc/bcm/Makefile ++++ b/drivers/soc/bcm/Makefile +@@ -1,2 +1,3 @@ ++obj-$(CONFIG_BCM2835_POWER) += bcm2835-power.o + obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o + obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ +--- /dev/null ++++ b/drivers/soc/bcm/bcm2835-power.c +@@ -0,0 +1,661 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Power domain driver for Broadcom BCM2835 ++ * ++ * Copyright (C) 2018 Broadcom ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define PM_GNRIC 0x00 ++#define PM_AUDIO 0x04 ++#define PM_STATUS 0x18 ++#define PM_RSTC 0x1c ++#define PM_RSTS 0x20 ++#define PM_WDOG 0x24 ++#define PM_PADS0 0x28 ++#define PM_PADS2 0x2c ++#define PM_PADS3 0x30 ++#define PM_PADS4 0x34 ++#define PM_PADS5 0x38 ++#define PM_PADS6 0x3c ++#define PM_CAM0 0x44 ++#define PM_CAM0_LDOHPEN BIT(2) ++#define PM_CAM0_LDOLPEN BIT(1) ++#define PM_CAM0_CTRLEN BIT(0) ++ ++#define PM_CAM1 0x48 ++#define PM_CAM1_LDOHPEN BIT(2) ++#define PM_CAM1_LDOLPEN BIT(1) ++#define PM_CAM1_CTRLEN BIT(0) ++ ++#define PM_CCP2TX 0x4c ++#define PM_CCP2TX_LDOEN BIT(1) ++#define PM_CCP2TX_CTRLEN BIT(0) ++ ++#define PM_DSI0 0x50 ++#define PM_DSI0_LDOHPEN BIT(2) ++#define PM_DSI0_LDOLPEN BIT(1) ++#define PM_DSI0_CTRLEN BIT(0) ++ ++#define PM_DSI1 0x54 ++#define PM_DSI1_LDOHPEN BIT(2) ++#define PM_DSI1_LDOLPEN BIT(1) ++#define PM_DSI1_CTRLEN BIT(0) ++ ++#define PM_HDMI 0x58 ++#define PM_HDMI_RSTDR BIT(19) ++#define PM_HDMI_LDOPD BIT(1) ++#define PM_HDMI_CTRLEN BIT(0) ++ ++#define PM_USB 0x5c ++/* The power gates must be enabled with this bit before enabling the LDO in the ++ * USB block. ++ */ ++#define PM_USB_CTRLEN BIT(0) ++ ++#define PM_PXLDO 0x60 ++#define PM_PXBG 0x64 ++#define PM_DFT 0x68 ++#define PM_SMPS 0x6c ++#define PM_XOSC 0x70 ++#define PM_SPAREW 0x74 ++#define PM_SPARER 0x78 ++#define PM_AVS_RSTDR 0x7c ++#define PM_AVS_STAT 0x80 ++#define PM_AVS_EVENT 0x84 ++#define PM_AVS_INTEN 0x88 ++#define PM_DUMMY 0xfc ++ ++#define PM_IMAGE 0x108 ++#define PM_GRAFX 0x10c ++#define PM_PROC 0x110 ++#define PM_ENAB BIT(12) ++#define PM_ISPRSTN BIT(8) ++#define PM_H264RSTN BIT(7) ++#define PM_PERIRSTN BIT(6) ++#define PM_V3DRSTN BIT(6) ++#define PM_ISFUNC BIT(5) ++#define PM_MRDONE BIT(4) ++#define PM_MEMREP BIT(3) ++#define PM_ISPOW BIT(2) ++#define PM_POWOK BIT(1) ++#define PM_POWUP BIT(0) ++#define PM_INRUSH_SHIFT 13 ++#define PM_INRUSH_3_5_MA 0 ++#define PM_INRUSH_5_MA 1 ++#define PM_INRUSH_10_MA 2 ++#define PM_INRUSH_20_MA 3 ++#define PM_INRUSH_MASK (3 << PM_INRUSH_SHIFT) ++ ++#define PM_PASSWORD 0x5a000000 ++ ++#define PM_WDOG_TIME_SET 0x000fffff ++#define PM_RSTC_WRCFG_CLR 0xffffffcf ++#define PM_RSTS_HADWRH_SET 0x00000040 ++#define PM_RSTC_WRCFG_SET 0x00000030 ++#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 ++#define PM_RSTC_RESET 0x00000102 ++ ++#define PM_READ(reg) readl(power->base + (reg)) ++#define PM_WRITE(reg, val) writel(PM_PASSWORD | (val), power->base + (reg)) ++ ++#define ASB_BRDG_VERSION 0x00 ++#define ASB_CPR_CTRL 0x04 ++ ++#define ASB_V3D_S_CTRL 0x08 ++#define ASB_V3D_M_CTRL 0x0c ++#define ASB_ISP_S_CTRL 0x10 ++#define ASB_ISP_M_CTRL 0x14 ++#define ASB_H264_S_CTRL 0x18 ++#define ASB_H264_M_CTRL 0x1c ++ ++#define ASB_REQ_STOP BIT(0) ++#define ASB_ACK BIT(1) ++#define ASB_EMPTY BIT(2) ++#define ASB_FULL BIT(3) ++ ++#define ASB_AXI_BRDG_ID 0x20 ++ ++#define ASB_READ(reg) readl(power->asb + (reg)) ++#define ASB_WRITE(reg, val) writel(PM_PASSWORD | (val), power->asb + (reg)) ++ ++struct bcm2835_power_domain { ++ struct generic_pm_domain base; ++ struct bcm2835_power *power; ++ u32 domain; ++ struct clk *clk; ++}; ++ ++struct bcm2835_power { ++ struct device *dev; ++ /* PM registers. */ ++ void __iomem *base; ++ /* AXI Async bridge registers. */ ++ void __iomem *asb; ++ ++ struct genpd_onecell_data pd_xlate; ++ struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT]; ++ struct reset_controller_dev reset; ++}; ++ ++static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg) ++{ ++ u64 start = ktime_get_ns(); ++ ++ /* Enable the module's async AXI bridges. */ ++ ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP); ++ while (ASB_READ(reg) & ASB_ACK) { ++ cpu_relax(); ++ if (ktime_get_ns() - start >= 1000) ++ return -ETIMEDOUT; ++ } ++ ++ return 0; ++} ++ ++static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg) ++{ ++ u64 start = ktime_get_ns(); ++ ++ /* Enable the module's async AXI bridges. */ ++ ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP); ++ while (!(ASB_READ(reg) & ASB_ACK)) { ++ cpu_relax(); ++ if (ktime_get_ns() - start >= 1000) ++ return -ETIMEDOUT; ++ } ++ ++ return 0; ++} ++ ++static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg) ++{ ++ struct bcm2835_power *power = pd->power; ++ ++ /* Enable functional isolation */ ++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC); ++ ++ /* Enable electrical isolation */ ++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW); ++ ++ /* Open the power switches. */ ++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_POWUP); ++ ++ return 0; ++} ++ ++static int bcm2835_power_power_on(struct bcm2835_power_domain *pd, u32 pm_reg) ++{ ++ struct bcm2835_power *power = pd->power; ++ struct device *dev = power->dev; ++ u64 start; ++ int ret; ++ int inrush; ++ bool powok; ++ ++ /* If it was already powered on by the fw, leave it that way. */ ++ if (PM_READ(pm_reg) & PM_POWUP) ++ return 0; ++ ++ /* Enable power. Allowing too much current at once may result ++ * in POWOK never getting set, so start low and ramp it up as ++ * necessary to succeed. ++ */ ++ powok = false; ++ for (inrush = PM_INRUSH_3_5_MA; inrush <= PM_INRUSH_20_MA; inrush++) { ++ PM_WRITE(pm_reg, ++ (PM_READ(pm_reg) & ~PM_INRUSH_MASK) | ++ (inrush << PM_INRUSH_SHIFT) | ++ PM_POWUP); ++ ++ start = ktime_get_ns(); ++ while (!(powok = !!(PM_READ(pm_reg) & PM_POWOK))) { ++ cpu_relax(); ++ if (ktime_get_ns() - start >= 3000) ++ break; ++ } ++ } ++ if (!powok) { ++ dev_err(dev, "Timeout waiting for %s power OK\n", ++ pd->base.name); ++ ret = -ETIMEDOUT; ++ goto err_disable_powup; ++ } ++ ++ /* Disable electrical isolation */ ++ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISPOW); ++ ++ /* Repair memory */ ++ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_MEMREP); ++ start = ktime_get_ns(); ++ while (!(PM_READ(pm_reg) & PM_MRDONE)) { ++ cpu_relax(); ++ if (ktime_get_ns() - start >= 1000) { ++ dev_err(dev, "Timeout waiting for %s memory repair\n", ++ pd->base.name); ++ ret = -ETIMEDOUT; ++ goto err_disable_ispow; ++ } ++ } ++ ++ /* Disable functional isolation */ ++ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISFUNC); ++ ++ return 0; ++ ++err_disable_ispow: ++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW); ++err_disable_powup: ++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~(PM_POWUP | PM_INRUSH_MASK)); ++ return ret; ++} ++ ++static int bcm2835_asb_power_on(struct bcm2835_power_domain *pd, ++ u32 pm_reg, ++ u32 asb_m_reg, ++ u32 asb_s_reg, ++ u32 reset_flags) ++{ ++ struct bcm2835_power *power = pd->power; ++ int ret; ++ ++ ret = clk_prepare_enable(pd->clk); ++ if (ret) { ++ dev_err(power->dev, "Failed to enable clock for %s\n", ++ pd->base.name); ++ return ret; ++ } ++ ++ /* Wait 32 clocks for reset to propagate, 1 us will be enough */ ++ udelay(1); ++ ++ clk_disable_unprepare(pd->clk); ++ ++ /* Deassert the resets. */ ++ PM_WRITE(pm_reg, PM_READ(pm_reg) | reset_flags); ++ ++ ret = clk_prepare_enable(pd->clk); ++ if (ret) { ++ dev_err(power->dev, "Failed to enable clock for %s\n", ++ pd->base.name); ++ goto err_enable_resets; ++ } ++ ++ ret = bcm2835_asb_enable(power, asb_m_reg); ++ if (ret) { ++ dev_err(power->dev, "Failed to enable ASB master for %s\n", ++ pd->base.name); ++ goto err_disable_clk; ++ } ++ ret = bcm2835_asb_enable(power, asb_s_reg); ++ if (ret) { ++ dev_err(power->dev, "Failed to enable ASB slave for %s\n", ++ pd->base.name); ++ goto err_disable_asb_master; ++ } ++ ++ return 0; ++ ++err_disable_asb_master: ++ bcm2835_asb_disable(power, asb_m_reg); ++err_disable_clk: ++ clk_disable_unprepare(pd->clk); ++err_enable_resets: ++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags); ++ return ret; ++} ++ ++static int bcm2835_asb_power_off(struct bcm2835_power_domain *pd, ++ u32 pm_reg, ++ u32 asb_m_reg, ++ u32 asb_s_reg, ++ u32 reset_flags) ++{ ++ struct bcm2835_power *power = pd->power; ++ int ret; ++ ++ ret = bcm2835_asb_disable(power, asb_s_reg); ++ if (ret) { ++ dev_warn(power->dev, "Failed to disable ASB slave for %s\n", ++ pd->base.name); ++ return ret; ++ } ++ ret = bcm2835_asb_disable(power, asb_m_reg); ++ if (ret) { ++ dev_warn(power->dev, "Failed to disable ASB master for %s\n", ++ pd->base.name); ++ bcm2835_asb_enable(power, asb_s_reg); ++ return ret; ++ } ++ ++ clk_disable_unprepare(pd->clk); ++ ++ /* Assert the resets. */ ++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags); ++ ++ return 0; ++} ++ ++static int bcm2835_power_pd_power_on(struct generic_pm_domain *domain) ++{ ++ struct bcm2835_power_domain *pd = ++ container_of(domain, struct bcm2835_power_domain, base); ++ struct bcm2835_power *power = pd->power; ++ ++ switch (pd->domain) { ++ case BCM2835_POWER_DOMAIN_GRAFX: ++ return bcm2835_power_power_on(pd, PM_GRAFX); ++ ++ case BCM2835_POWER_DOMAIN_GRAFX_V3D: ++ return bcm2835_asb_power_on(pd, PM_GRAFX, ++ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL, ++ PM_V3DRSTN); ++ ++ case BCM2835_POWER_DOMAIN_IMAGE: ++ return bcm2835_power_power_on(pd, PM_IMAGE); ++ ++ case BCM2835_POWER_DOMAIN_IMAGE_PERI: ++ return bcm2835_asb_power_on(pd, PM_IMAGE, ++ 0, 0, ++ PM_PERIRSTN); ++ ++ case BCM2835_POWER_DOMAIN_IMAGE_ISP: ++ return bcm2835_asb_power_on(pd, PM_IMAGE, ++ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL, ++ PM_ISPRSTN); ++ ++ case BCM2835_POWER_DOMAIN_IMAGE_H264: ++ return bcm2835_asb_power_on(pd, PM_IMAGE, ++ ASB_H264_M_CTRL, ASB_H264_S_CTRL, ++ PM_H264RSTN); ++ ++ case BCM2835_POWER_DOMAIN_USB: ++ PM_WRITE(PM_USB, PM_USB_CTRLEN); ++ return 0; ++ ++ case BCM2835_POWER_DOMAIN_DSI0: ++ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN); ++ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN | PM_DSI0_LDOHPEN); ++ return 0; ++ ++ case BCM2835_POWER_DOMAIN_DSI1: ++ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN); ++ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN | PM_DSI1_LDOHPEN); ++ return 0; ++ ++ case BCM2835_POWER_DOMAIN_CCP2TX: ++ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN); ++ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN | PM_CCP2TX_LDOEN); ++ return 0; ++ ++ case BCM2835_POWER_DOMAIN_HDMI: ++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_RSTDR); ++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_CTRLEN); ++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_LDOPD); ++ usleep_range(100, 200); ++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_RSTDR); ++ return 0; ++ ++ default: ++ dev_err(power->dev, "Invalid domain %d\n", pd->domain); ++ return -EINVAL; ++ } ++} ++ ++static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) ++{ ++ struct bcm2835_power_domain *pd = ++ container_of(domain, struct bcm2835_power_domain, base); ++ struct bcm2835_power *power = pd->power; ++ ++ switch (pd->domain) { ++ case BCM2835_POWER_DOMAIN_GRAFX: ++ return bcm2835_power_power_off(pd, PM_GRAFX); ++ ++ case BCM2835_POWER_DOMAIN_GRAFX_V3D: ++ return bcm2835_asb_power_off(pd, PM_GRAFX, ++ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL, ++ PM_V3DRSTN); ++ ++ case BCM2835_POWER_DOMAIN_IMAGE: ++ return bcm2835_power_power_off(pd, PM_IMAGE); ++ ++ case BCM2835_POWER_DOMAIN_IMAGE_PERI: ++ return bcm2835_asb_power_off(pd, PM_IMAGE, ++ 0, 0, ++ PM_PERIRSTN); ++ ++ case BCM2835_POWER_DOMAIN_IMAGE_ISP: ++ return bcm2835_asb_power_off(pd, PM_IMAGE, ++ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL, ++ PM_ISPRSTN); ++ ++ case BCM2835_POWER_DOMAIN_IMAGE_H264: ++ return bcm2835_asb_power_off(pd, PM_IMAGE, ++ ASB_H264_M_CTRL, ASB_H264_S_CTRL, ++ PM_H264RSTN); ++ ++ case BCM2835_POWER_DOMAIN_USB: ++ PM_WRITE(PM_USB, 0); ++ return 0; ++ ++ case BCM2835_POWER_DOMAIN_DSI0: ++ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN); ++ PM_WRITE(PM_DSI0, 0); ++ return 0; ++ ++ case BCM2835_POWER_DOMAIN_DSI1: ++ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN); ++ PM_WRITE(PM_DSI1, 0); ++ return 0; ++ ++ case BCM2835_POWER_DOMAIN_CCP2TX: ++ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN); ++ PM_WRITE(PM_CCP2TX, 0); ++ return 0; ++ ++ case BCM2835_POWER_DOMAIN_HDMI: ++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_LDOPD); ++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_CTRLEN); ++ return 0; ++ ++ default: ++ dev_err(power->dev, "Invalid domain %d\n", pd->domain); ++ return -EINVAL; ++ } ++} ++ ++static void ++bcm2835_init_power_domain(struct bcm2835_power *power, ++ int pd_xlate_index, const char *name) ++{ ++ struct device *dev = power->dev; ++ struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; ++ ++ dom->clk = devm_clk_get(dev->parent, name); ++ ++ dom->base.name = name; ++ dom->base.power_on = bcm2835_power_pd_power_on; ++ dom->base.power_off = bcm2835_power_pd_power_off; ++ ++ dom->domain = pd_xlate_index; ++ dom->power = power; ++ ++ /* XXX: on/off at boot? */ ++ pm_genpd_init(&dom->base, NULL, true); ++ ++ power->pd_xlate.domains[pd_xlate_index] = &dom->base; ++} ++ ++/** bcm2835_reset_reset - Resets a block that has a reset line in the ++ * PM block. ++ * ++ * The consumer of the reset controller must have the power domain up ++ * -- there's no reset ability with the power domain down. To reset ++ * the sub-block, we just disable its access to memory through the ++ * ASB, reset, and re-enable. ++ */ ++static int bcm2835_reset_reset(struct reset_controller_dev *rcdev, ++ unsigned long id) ++{ ++ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power, ++ reset); ++ struct bcm2835_power_domain *pd; ++ int ret; ++ ++ switch (id) { ++ case BCM2835_RESET_V3D: ++ pd = &power->domains[BCM2835_POWER_DOMAIN_GRAFX_V3D]; ++ break; ++ case BCM2835_RESET_H264: ++ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_H264]; ++ break; ++ case BCM2835_RESET_ISP: ++ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_ISP]; ++ break; ++ default: ++ dev_err(power->dev, "Bad reset id %ld\n", id); ++ return -EINVAL; ++ } ++ ++ ret = bcm2835_power_pd_power_off(&pd->base); ++ if (ret) ++ return ret; ++ ++ return bcm2835_power_pd_power_on(&pd->base); ++} ++ ++static int bcm2835_reset_status(struct reset_controller_dev *rcdev, ++ unsigned long id) ++{ ++ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power, ++ reset); ++ ++ switch (id) { ++ case BCM2835_RESET_V3D: ++ return !PM_READ(PM_GRAFX & PM_V3DRSTN); ++ case BCM2835_RESET_H264: ++ return !PM_READ(PM_IMAGE & PM_H264RSTN); ++ case BCM2835_RESET_ISP: ++ return !PM_READ(PM_IMAGE & PM_ISPRSTN); ++ default: ++ return -EINVAL; ++ } ++} ++ ++const struct reset_control_ops bcm2835_reset_ops = { ++ .reset = bcm2835_reset_reset, ++ .status = bcm2835_reset_status, ++}; ++ ++static const char *const power_domain_names[] = { ++ [BCM2835_POWER_DOMAIN_GRAFX] = "grafx", ++ [BCM2835_POWER_DOMAIN_GRAFX_V3D] = "v3d", ++ ++ [BCM2835_POWER_DOMAIN_IMAGE] = "image", ++ [BCM2835_POWER_DOMAIN_IMAGE_PERI] = "peri_image", ++ [BCM2835_POWER_DOMAIN_IMAGE_H264] = "h264", ++ [BCM2835_POWER_DOMAIN_IMAGE_ISP] = "isp", ++ ++ [BCM2835_POWER_DOMAIN_USB] = "usb", ++ [BCM2835_POWER_DOMAIN_DSI0] = "dsi0", ++ [BCM2835_POWER_DOMAIN_DSI1] = "dsi1", ++ [BCM2835_POWER_DOMAIN_CAM0] = "cam0", ++ [BCM2835_POWER_DOMAIN_CAM1] = "cam1", ++ [BCM2835_POWER_DOMAIN_CCP2TX] = "ccp2tx", ++ [BCM2835_POWER_DOMAIN_HDMI] = "hdmi", ++}; ++ ++static int bcm2835_power_probe(struct platform_device *pdev) ++{ ++ struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent); ++ struct device *dev = &pdev->dev; ++ struct bcm2835_power *power; ++ static const struct { ++ int parent, child; ++ } domain_deps[] = { ++ { BCM2835_POWER_DOMAIN_GRAFX, BCM2835_POWER_DOMAIN_GRAFX_V3D }, ++ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_PERI }, ++ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_H264 }, ++ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_ISP }, ++ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_USB }, ++ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 }, ++ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 }, ++ }; ++ int ret, i; ++ u32 id; ++ ++ power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL); ++ if (!power) ++ return -ENOMEM; ++ platform_set_drvdata(pdev, power); ++ ++ power->dev = dev; ++ power->base = pm->base; ++ power->asb = pm->asb; ++ ++ id = ASB_READ(ASB_AXI_BRDG_ID); ++ if (id != 0x62726467 /* "BRDG" */) { ++ dev_err(dev, "ASB register ID returned 0x%08x\n", id); ++ return -ENODEV; ++ } ++ ++ power->pd_xlate.domains = devm_kcalloc(dev, ++ ARRAY_SIZE(power_domain_names), ++ sizeof(*power->pd_xlate.domains), ++ GFP_KERNEL); ++ if (!power->pd_xlate.domains) ++ return -ENOMEM; ++ ++ power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names); ++ ++ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) ++ bcm2835_init_power_domain(power, i, power_domain_names[i]); ++ ++ for (i = 0; i < ARRAY_SIZE(domain_deps); i++) { ++ pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base, ++ &power->domains[domain_deps[i].child].base); ++ } ++ ++ power->reset.owner = THIS_MODULE; ++ power->reset.nr_resets = BCM2835_RESET_COUNT; ++ power->reset.ops = &bcm2835_reset_ops; ++ power->reset.of_node = dev->parent->of_node; ++ ++ ret = devm_reset_controller_register(dev, &power->reset); ++ if (ret) ++ return ret; ++ ++ of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate); ++ ++ dev_info(dev, "Broadcom BCM2835 power domains driver"); ++ return 0; ++} ++ ++static int bcm2835_power_remove(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++static struct platform_driver bcm2835_power_driver = { ++ .probe = bcm2835_power_probe, ++ .remove = bcm2835_power_remove, ++ .driver = { ++ .name = "bcm2835-power", ++ }, ++}; ++module_platform_driver(bcm2835_power_driver); ++ ++MODULE_AUTHOR("Eric Anholt "); ++MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM power domains and reset"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/include/dt-bindings/soc/bcm2835-pm.h +@@ -0,0 +1,28 @@ ++/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ ++ ++#ifndef _DT_BINDINGS_ARM_BCM2835_PM_H ++#define _DT_BINDINGS_ARM_BCM2835_PM_H ++ ++#define BCM2835_POWER_DOMAIN_GRAFX 0 ++#define BCM2835_POWER_DOMAIN_GRAFX_V3D 1 ++#define BCM2835_POWER_DOMAIN_IMAGE 2 ++#define BCM2835_POWER_DOMAIN_IMAGE_PERI 3 ++#define BCM2835_POWER_DOMAIN_IMAGE_ISP 4 ++#define BCM2835_POWER_DOMAIN_IMAGE_H264 5 ++#define BCM2835_POWER_DOMAIN_USB 6 ++#define BCM2835_POWER_DOMAIN_DSI0 7 ++#define BCM2835_POWER_DOMAIN_DSI1 8 ++#define BCM2835_POWER_DOMAIN_CAM0 9 ++#define BCM2835_POWER_DOMAIN_CAM1 10 ++#define BCM2835_POWER_DOMAIN_CCP2TX 11 ++#define BCM2835_POWER_DOMAIN_HDMI 12 ++ ++#define BCM2835_POWER_DOMAIN_COUNT 13 ++ ++#define BCM2835_RESET_V3D 0 ++#define BCM2835_RESET_ISP 1 ++#define BCM2835_RESET_H264 2 ++ ++#define BCM2835_RESET_COUNT 3 ++ ++#endif /* _DT_BINDINGS_ARM_BCM2835_PM_H */ +--- a/include/linux/mfd/bcm2835-pm.h ++++ b/include/linux/mfd/bcm2835-pm.h +@@ -8,6 +8,7 @@ + struct bcm2835_pm { + struct device *dev; + void __iomem *base; ++ void __iomem *asb; + }; + + #endif /* BCM2835_MFD_PM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0508-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch b/target/linux/brcm2708/patches-4.19/950-0508-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch deleted file mode 100644 index ff74b418fa..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0508-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch +++ /dev/null @@ -1,148 +0,0 @@ -From e819b50b0c384f11f4eaf6e1ea76030c320f4511 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 28 May 2019 16:23:51 +0100 -Subject: [PATCH 508/806] BCM270X_DT: Create bcm2708-rpi-zero.dts - -The Pi Zero deserves a dedicated .dtb file - sharing the b-plus .dtb -has been observed to cause an issue with the MAC address of some -Ethernet dongles. - -See: https://github.com/raspberrypi/linux/issues/2990 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm2708-rpi-zero.dts | 117 +++++++++++++++++++++++++ - 2 files changed, 118 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-zero.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2708-rpi-b.dtb \ - bcm2708-rpi-b-plus.dtb \ - bcm2708-rpi-cm.dtb \ -+ bcm2708-rpi-zero.dtb \ - bcm2708-rpi-zero-w.dtb \ - bcm2709-rpi-2-b.dtb \ - bcm2710-rpi-3-b.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts -@@ -0,0 +1,117 @@ -+/dts-v1/; -+ -+#include "bcm2708.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,model-zero", "brcm,bcm2835"; -+ model = "Raspberry Pi Zero"; -+ -+ chosen { -+ bootargs = "coherent_pool=1M"; -+ }; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <>; -+ brcm,function = <>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0508-soc-bcm-bcm2835-pm-Fix-PM_IMAGE_PERI-power-domain-su.patch b/target/linux/brcm2708/patches-4.19/950-0508-soc-bcm-bcm2835-pm-Fix-PM_IMAGE_PERI-power-domain-su.patch new file mode 100644 index 0000000000..05ae67aeee --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0508-soc-bcm-bcm2835-pm-Fix-PM_IMAGE_PERI-power-domain-su.patch @@ -0,0 +1,45 @@ +From ea44a81b7daf511788aecaee7575feff359c5d19 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 11 Jan 2019 17:29:10 -0800 +Subject: [PATCH] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain + support. + +We don't have ASB master/slave regs for this domain, so just skip that +step. + +Signed-off-by: Eric Anholt +Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") +--- + drivers/soc/bcm/bcm2835-power.c | 14 ++++++++++++-- + 1 file changed, 12 insertions(+), 2 deletions(-) + +--- a/drivers/soc/bcm/bcm2835-power.c ++++ b/drivers/soc/bcm/bcm2835-power.c +@@ -150,7 +150,12 @@ struct bcm2835_power { + + static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg) + { +- u64 start = ktime_get_ns(); ++ u64 start; ++ ++ if (!reg) ++ return 0; ++ ++ start = ktime_get_ns(); + + /* Enable the module's async AXI bridges. */ + ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP); +@@ -165,7 +170,12 @@ static int bcm2835_asb_enable(struct bcm + + static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg) + { +- u64 start = ktime_get_ns(); ++ u64 start; ++ ++ if (!reg) ++ return 0; ++ ++ start = ktime_get_ns(); + + /* Enable the module's async AXI bridges. */ + ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP); diff --git a/target/linux/brcm2708/patches-4.19/950-0509-overlays-Fix-mmc-related-overlays-after-refactor.patch b/target/linux/brcm2708/patches-4.19/950-0509-overlays-Fix-mmc-related-overlays-after-refactor.patch deleted file mode 100644 index 3b5b562568..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0509-overlays-Fix-mmc-related-overlays-after-refactor.patch +++ /dev/null @@ -1,73 +0,0 @@ -From dadcb33e1f4ee70bc77da7fa7054b8571a22d5ea Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 30 May 2019 12:25:29 +0100 -Subject: [PATCH 509/806] overlays: Fix mmc-related overlays after refactor - -The addition of the mmcnr node to the base dtbs caused some overlays to -not work as they should. Patch up pi3-disable-wifi, balena-fin and -sdhost. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/balena-fin-overlay.dts | 7 ++++--- - arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts | 7 +++++++ - arch/arm/boot/dts/overlays/sdhost-overlay.dts | 7 +++++++ - 3 files changed, 18 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -@@ -5,13 +5,12 @@ - compatible = "brcm,bcm2835"; - - fragment@0 { -- target = <&mmc>; -- sdio_wifi: __overlay__ { -+ target = <&mmcnr>; -+ __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; - bus-width = <4>; - brcm,overclock-50 = <35>; -- non-removable; - status = "okay"; - }; - }; -@@ -43,6 +42,8 @@ - compatible = "gpio-poweroff"; - gpios = <&gpio 40 1>; - force; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&power_ctrl_pins>; - }; - - i2c_soft: i2c@0 { ---- a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts -@@ -10,4 +10,11 @@ - status = "disabled"; - }; - }; -+ -+ fragment@1 { -+ target = <&mmcnr>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; - }; ---- a/arch/arm/boot/dts/overlays/sdhost-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts -@@ -22,6 +22,13 @@ - }; - }; - -+ fragment@2 { -+ target = <&mmcnr>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ - __overrides__ { - overclock_50 = <&frag0>,"brcm,overclock-50:0"; - force_pio = <&frag0>,"brcm,force-pio?"; diff --git a/target/linux/brcm2708/patches-4.19/950-0509-soc-bcm-bcm2835-pm-Fix-error-paths-of-initialization.patch b/target/linux/brcm2708/patches-4.19/950-0509-soc-bcm-bcm2835-pm-Fix-error-paths-of-initialization.patch new file mode 100644 index 0000000000..0f3ea9a9f2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0509-soc-bcm-bcm2835-pm-Fix-error-paths-of-initialization.patch @@ -0,0 +1,103 @@ +From 8d9f3526529d857376c661c21820a0049c2e62de Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Sat, 12 Jan 2019 08:07:43 -0800 +Subject: [PATCH] soc: bcm: bcm2835-pm: Fix error paths of + initialization. + +The clock driver may probe after ours and so we need to pass the +-EPROBE_DEFER out. Fix the other error path while we're here. + +v2: Use dom->name instead of dom->gov as the flag for initialized + domains, since we aren't setting up a governor. Make sure to + clear ->clk when no clk is present in the DT. + +Signed-off-by: Eric Anholt +Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") +--- + drivers/soc/bcm/bcm2835-power.c | 35 ++++++++++++++++++++++++++++----- + 1 file changed, 30 insertions(+), 5 deletions(-) + +--- a/drivers/soc/bcm/bcm2835-power.c ++++ b/drivers/soc/bcm/bcm2835-power.c +@@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(st + } + } + +-static void ++static int + bcm2835_init_power_domain(struct bcm2835_power *power, + int pd_xlate_index, const char *name) + { +@@ -493,6 +493,17 @@ bcm2835_init_power_domain(struct bcm2835 + struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; + + dom->clk = devm_clk_get(dev->parent, name); ++ if (IS_ERR(dom->clk)) { ++ int ret = PTR_ERR(dom->clk); ++ ++ if (ret == -EPROBE_DEFER) ++ return ret; ++ ++ /* Some domains don't have a clk, so make sure that we ++ * don't deref an error pointer later. ++ */ ++ dom->clk = NULL; ++ } + + dom->base.name = name; + dom->base.power_on = bcm2835_power_pd_power_on; +@@ -505,6 +516,8 @@ bcm2835_init_power_domain(struct bcm2835 + pm_genpd_init(&dom->base, NULL, true); + + power->pd_xlate.domains[pd_xlate_index] = &dom->base; ++ ++ return 0; + } + + /** bcm2835_reset_reset - Resets a block that has a reset line in the +@@ -602,7 +615,7 @@ static int bcm2835_power_probe(struct pl + { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 }, + { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 }, + }; +- int ret, i; ++ int ret = 0, i; + u32 id; + + power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL); +@@ -629,8 +642,11 @@ static int bcm2835_power_probe(struct pl + + power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names); + +- for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) +- bcm2835_init_power_domain(power, i, power_domain_names[i]); ++ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { ++ ret = bcm2835_init_power_domain(power, i, power_domain_names[i]); ++ if (ret) ++ goto fail; ++ } + + for (i = 0; i < ARRAY_SIZE(domain_deps); i++) { + pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base, +@@ -644,12 +660,21 @@ static int bcm2835_power_probe(struct pl + + ret = devm_reset_controller_register(dev, &power->reset); + if (ret) +- return ret; ++ goto fail; + + of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate); + + dev_info(dev, "Broadcom BCM2835 power domains driver"); + return 0; ++ ++fail: ++ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { ++ struct generic_pm_domain *dom = &power->domains[i].base; ++ ++ if (dom->name) ++ pm_genpd_remove(dom); ++ } ++ return ret; + } + + static int bcm2835_power_remove(struct platform_device *pdev) diff --git a/target/linux/brcm2708/patches-4.19/950-0510-soc-bcm-bcm2835-pm-Add-support-for-2711.patch b/target/linux/brcm2708/patches-4.19/950-0510-soc-bcm-bcm2835-pm-Add-support-for-2711.patch new file mode 100644 index 0000000000..4c87289455 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0510-soc-bcm-bcm2835-pm-Add-support-for-2711.patch @@ -0,0 +1,102 @@ +From f3470769d4e64084fc7f3060d634aff8fdf8f75d Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 11 Jan 2019 17:31:07 -0800 +Subject: [PATCH] soc: bcm: bcm2835-pm: Add support for 2711. + +Without the actual power management part any more, there's a lot less +to set up for V3D. We just need to clear the RSTN field for the power +domain, and expose the reset controller for toggling it again. + +This is definitely incomplete -- the old ISP and H264 is in the old +bridge, but since we have no consumers of it I've just done the +minimum to get V3D working. + +Signed-off-by: Eric Anholt +--- + drivers/mfd/bcm2835-pm.c | 11 +++++++++++ + drivers/soc/bcm/bcm2835-power.c | 22 ++++++++++++++++++++++ + include/linux/mfd/bcm2835-pm.h | 1 + + 3 files changed, 34 insertions(+) + +--- a/drivers/mfd/bcm2835-pm.c ++++ b/drivers/mfd/bcm2835-pm.c +@@ -50,6 +50,17 @@ static int bcm2835_pm_probe(struct platf + if (ret) + return ret; + ++ /* Map the ARGON ASB regs if present. */ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 2); ++ if (res) { ++ pm->arg_asb = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pm->arg_asb)) { ++ dev_err(dev, "Failed to map ARGON ASB: %ld\n", ++ PTR_ERR(pm->arg_asb)); ++ return PTR_ERR(pm->arg_asb); ++ } ++ } ++ + /* We'll use the presence of the AXI ASB regs in the + * bcm2835-pm binding as the key for whether we can reference + * the full PM register range and support power domains. +--- a/drivers/soc/bcm/bcm2835-power.c ++++ b/drivers/soc/bcm/bcm2835-power.c +@@ -143,6 +143,8 @@ struct bcm2835_power { + /* AXI Async bridge registers. */ + void __iomem *asb; + ++ bool is_2711; ++ + struct genpd_onecell_data pd_xlate; + struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT]; + struct reset_controller_dev reset; +@@ -192,6 +194,10 @@ static int bcm2835_power_power_off(struc + { + struct bcm2835_power *power = pd->power; + ++ /* 2711 has no power domains above the reset controller. */ ++ if (power->is_2711) ++ return 0; ++ + /* Enable functional isolation */ + PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC); + +@@ -213,6 +219,10 @@ static int bcm2835_power_power_on(struct + int inrush; + bool powok; + ++ /* 2711 has no power domains above the reset controller. */ ++ if (power->is_2711) ++ return 0; ++ + /* If it was already powered on by the fw, leave it that way. */ + if (PM_READ(pm_reg) & PM_POWUP) + return 0; +@@ -627,6 +637,18 @@ static int bcm2835_power_probe(struct pl + power->base = pm->base; + power->asb = pm->asb; + ++ /* 2711 hack: the new ARGON ASB took over V3D, which is our ++ * only consumer of this driver so far. The old ASB seems to ++ * still be present with ISP and H264 bits but no V3D, but I ++ * don't know if that's real or not. The V3D is in the same ++ * place in the new ASB as the old one, so just poke the new ++ * one for now. ++ */ ++ if (pm->arg_asb) { ++ power->asb = pm->arg_asb; ++ power->is_2711 = true; ++ } ++ + id = ASB_READ(ASB_AXI_BRDG_ID); + if (id != 0x62726467 /* "BRDG" */) { + dev_err(dev, "ASB register ID returned 0x%08x\n", id); +--- a/include/linux/mfd/bcm2835-pm.h ++++ b/include/linux/mfd/bcm2835-pm.h +@@ -9,6 +9,7 @@ struct bcm2835_pm { + struct device *dev; + void __iomem *base; + void __iomem *asb; ++ void __iomem *arg_asb; + }; + + #endif /* BCM2835_MFD_PM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0511-Fixed-48k-timing-issue.patch b/target/linux/brcm2708/patches-4.19/950-0511-Fixed-48k-timing-issue.patch deleted file mode 100644 index ab4b1f0b26..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0511-Fixed-48k-timing-issue.patch +++ /dev/null @@ -1,95 +0,0 @@ -From 539e2eef7dbfb58ab028a5530430611973dd4c84 Mon Sep 17 00:00:00 2001 -From: IQaudIO -Date: Thu, 6 Jun 2019 10:20:55 +0100 -Subject: [PATCH 511/806] Fixed 48k timing issue - ---- - sound/soc/bcm/iqaudio-codec.c | 33 ++++++++++++++++++++++++++++----- - 1 file changed, 28 insertions(+), 5 deletions(-) - ---- a/sound/soc/bcm/iqaudio-codec.c -+++ b/sound/soc/bcm/iqaudio-codec.c -@@ -45,11 +45,15 @@ static int snd_rpi_iqaudio_pll_control(s - 0); - if (ret) - dev_err(card->dev, "Failed to bypass PLL: %d\n", ret); -+ /* Allow PLL time to bypass */ -+ msleep(100); - } else if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_pll(codec_dai, 0, DA7213_SYSCLK_PLL, 0, - pll_out); - if (ret) - dev_err(card->dev, "Failed to enable PLL: %d\n", ret); -+ /* Allow PLL time to lock */ -+ msleep(100); - } - - return ret; -@@ -71,6 +75,13 @@ static int snd_rpi_iqaudio_post_dapm_eve - return 0; - } - -+static const struct snd_kcontrol_new dapm_controls[] = { -+ SOC_DAPM_PIN_SWITCH("HP Jack"), -+ SOC_DAPM_PIN_SWITCH("MIC Jack"), -+ SOC_DAPM_PIN_SWITCH("Onboard MIC"), -+ SOC_DAPM_PIN_SWITCH("AUX Jack"), -+}; -+ - static const struct snd_soc_dapm_widget dapm_widgets[] = { - SND_SOC_DAPM_HP("HP Jack", NULL), - SND_SOC_DAPM_MIC("MIC Jack", NULL), -@@ -87,14 +98,14 @@ static const struct snd_soc_dapm_route a - {"HP Jack", NULL, "HPR"}, - {"HP Jack", NULL, "PLL Control"}, - -- {"AUX Jack", NULL, "AUXR"}, -- {"AUX Jack", NULL, "AUXL"}, -+ {"AUXR", NULL, "AUX Jack"}, -+ {"AUXL", NULL, "AUX Jack"}, - {"AUX Jack", NULL, "PLL Control"}, - - /* Assume Mic1 is linked to Headset and Mic2 to on-board mic */ -- {"MIC Jack", NULL, "MIC1"}, -+ {"MIC1", NULL, "MIC Jack"}, - {"MIC Jack", NULL, "PLL Control"}, -- {"Onboard MIC", NULL, "MIC2"}, -+ {"MIC2", NULL, "Onboard MIC"}, - {"Onboard MIC", NULL, "PLL Control"}, - }; - -@@ -106,6 +117,16 @@ static int snd_rpi_iqaudio_codec_init(st - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - int ret; - -+ /* -+ * Disable AUX Jack Pin by default to prevent PLL being enabled at -+ * startup. This avoids holding the PLL to a fixed SR config for -+ * subsequent streams. -+ * -+ * This pin can still be enabled later, as required by user-space. -+ */ -+ snd_soc_dapm_disable_pin(&rtd->card->dapm, "AUX Jack"); -+ snd_soc_dapm_sync(&rtd->card->dapm); -+ - /* Set bclk ratio to align with codec's BCLK rate */ - ret = snd_soc_dai_set_bclk_ratio(cpu_dai, 64); - if (ret) { -@@ -168,6 +189,8 @@ static struct snd_soc_card snd_rpi_iqaud - .owner = THIS_MODULE, - .dai_link = snd_rpi_iqaudio_codec_dai, - .num_links = ARRAY_SIZE(snd_rpi_iqaudio_codec_dai), -+ .controls = dapm_controls, -+ .num_controls = ARRAY_SIZE(dapm_controls), - .dapm_widgets = dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(dapm_widgets), - .dapm_routes = audio_map, -@@ -204,7 +227,7 @@ static int snd_rpi_iqaudio_codec_probe(s - - if (of_property_read_string(pdev->dev.of_node, - "dai_stream_name", &dai->stream_name)) -- dai->stream_name = "IQaudIO CODEC HiFi v1.1"; -+ dai->stream_name = "IQaudIO CODEC HiFi v1.2"; - - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0511-drm-expand-drm_syncobj_find_fence-to-support-timelin.patch b/target/linux/brcm2708/patches-4.19/950-0511-drm-expand-drm_syncobj_find_fence-to-support-timelin.patch new file mode 100644 index 0000000000..2b4d34e3fe --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0511-drm-expand-drm_syncobj_find_fence-to-support-timelin.patch @@ -0,0 +1,104 @@ +From 7e891cb1f9f57c87706b1292f186d65e1640e0e7 Mon Sep 17 00:00:00 2001 +From: Chunming Zhou +Date: Thu, 30 Aug 2018 14:48:29 +0800 +Subject: [PATCH] drm: expand drm_syncobj_find_fence to support + timeline point v2 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +we can fetch timeline point fence after expanded. +v2: The parameter fence is the result of the function and should come last. + +Signed-off-by: Chunming Zhou +Reviewed-by: Christian König +Signed-off-by: Christian König +Link: https://patchwork.freedesktop.org/patch/246541/ +(cherry picked from commit 0a6730ea27b68c7ac4171c29a816c29d26a9637a) +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- + drivers/gpu/drm/drm_syncobj.c | 5 +++-- + drivers/gpu/drm/v3d/v3d_gem.c | 4 ++-- + drivers/gpu/drm/vc4/vc4_gem.c | 2 +- + include/drm/drm_syncobj.h | 2 +- + 5 files changed, 8 insertions(+), 7 deletions(-) + +--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c ++++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +@@ -1105,7 +1105,7 @@ static int amdgpu_syncobj_lookup_and_add + { + int r; + struct dma_fence *fence; +- r = drm_syncobj_find_fence(p->filp, handle, &fence); ++ r = drm_syncobj_find_fence(p->filp, handle, 0, &fence); + if (r) + return r; + +--- a/drivers/gpu/drm/drm_syncobj.c ++++ b/drivers/gpu/drm/drm_syncobj.c +@@ -235,6 +235,7 @@ static int drm_syncobj_assign_null_handl + * drm_syncobj_find_fence - lookup and reference the fence in a sync object + * @file_private: drm file private pointer + * @handle: sync object handle to lookup. ++ * @point: timeline point + * @fence: out parameter for the fence + * + * This is just a convenience function that combines drm_syncobj_find() and +@@ -245,7 +246,7 @@ static int drm_syncobj_assign_null_handl + * dma_fence_put(). + */ + int drm_syncobj_find_fence(struct drm_file *file_private, +- u32 handle, ++ u32 handle, u64 point, + struct dma_fence **fence) + { + struct drm_syncobj *syncobj = drm_syncobj_find(file_private, handle); +@@ -516,7 +517,7 @@ static int drm_syncobj_export_sync_file( + if (fd < 0) + return fd; + +- ret = drm_syncobj_find_fence(file_private, handle, &fence); ++ ret = drm_syncobj_find_fence(file_private, handle, 0, &fence); + if (ret) + goto err_put_fd; + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -521,12 +521,12 @@ v3d_submit_cl_ioctl(struct drm_device *d + kref_init(&exec->refcount); + + ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl, +- &exec->bin.in_fence); ++ 0, &exec->bin.in_fence); + if (ret == -EINVAL) + goto fail; + + ret = drm_syncobj_find_fence(file_priv, args->in_sync_rcl, +- &exec->render.in_fence); ++ 0, &exec->render.in_fence); + if (ret == -EINVAL) + goto fail; + +--- a/drivers/gpu/drm/vc4/vc4_gem.c ++++ b/drivers/gpu/drm/vc4/vc4_gem.c +@@ -1173,7 +1173,7 @@ vc4_submit_cl_ioctl(struct drm_device *d + + if (args->in_sync) { + ret = drm_syncobj_find_fence(file_priv, args->in_sync, +- &in_fence); ++ 0, &in_fence); + if (ret) + goto fail; + +--- a/include/drm/drm_syncobj.h ++++ b/include/drm/drm_syncobj.h +@@ -139,7 +139,7 @@ void drm_syncobj_remove_callback(struct + void drm_syncobj_replace_fence(struct drm_syncobj *syncobj, + struct dma_fence *fence); + int drm_syncobj_find_fence(struct drm_file *file_private, +- u32 handle, ++ u32 handle, u64 point, + struct dma_fence **fence); + void drm_syncobj_free(struct kref *kref); + int drm_syncobj_create(struct drm_syncobj **out_syncobj, uint32_t flags, diff --git a/target/linux/brcm2708/patches-4.19/950-0512-drm-v3d-Fix-a-use-after-free-race-accessing-the-sche.patch b/target/linux/brcm2708/patches-4.19/950-0512-drm-v3d-Fix-a-use-after-free-race-accessing-the-sche.patch new file mode 100644 index 0000000000..126452f974 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0512-drm-v3d-Fix-a-use-after-free-race-accessing-the-sche.patch @@ -0,0 +1,73 @@ +From f5f3df2b1746a9ba9420ae11988fc37a7b93691d Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 28 Sep 2018 16:21:23 -0700 +Subject: [PATCH] drm/v3d: Fix a use-after-free race accessing the + scheduler's fences. + +Once we push the job, the scheduler could run it and free it. So, if +we want to reference their fences, we need to grab them before then. +I haven't seen this happen in many days of conformance test runtime, +but let's still close the race. + +Signed-off-by: Eric Anholt +Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") +Link: https://patchwork.freedesktop.org/patch/254119/ +Reviewed-by: Boris Brezillon +(cherry picked from commit 34c2c4f632f232ed2fdb66d4e42cc72d322273fe) +--- + drivers/gpu/drm/v3d/v3d_drv.h | 5 +++++ + drivers/gpu/drm/v3d/v3d_gem.c | 8 ++++++-- + 2 files changed, 11 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -198,6 +198,11 @@ struct v3d_exec_info { + */ + struct dma_fence *bin_done_fence; + ++ /* Fence for when the scheduler considers the render to be ++ * done, for when the BOs reservations should be complete. ++ */ ++ struct dma_fence *render_done_fence; ++ + struct kref refcount; + + /* This is the array of BOs that were looked up at the start of exec. */ +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -209,7 +209,7 @@ v3d_flush_caches(struct v3d_dev *v3d) + static void + v3d_attach_object_fences(struct v3d_exec_info *exec) + { +- struct dma_fence *out_fence = &exec->render.base.s_fence->finished; ++ struct dma_fence *out_fence = exec->render_done_fence; + struct v3d_bo *bo; + int i; + +@@ -409,6 +409,7 @@ v3d_exec_cleanup(struct kref *ref) + dma_fence_put(exec->render.done_fence); + + dma_fence_put(exec->bin_done_fence); ++ dma_fence_put(exec->render_done_fence); + + for (i = 0; i < exec->bo_count; i++) + drm_gem_object_put_unlocked(&exec->bo[i]->base); +@@ -572,6 +573,9 @@ v3d_submit_cl_ioctl(struct drm_device *d + if (ret) + goto fail_unreserve; + ++ exec->render_done_fence = ++ dma_fence_get(&exec->render.base.s_fence->finished); ++ + kref_get(&exec->refcount); /* put by scheduler job completion */ + drm_sched_entity_push_job(&exec->render.base, + &v3d_priv->sched_entity[V3D_RENDER]); +@@ -585,7 +589,7 @@ v3d_submit_cl_ioctl(struct drm_device *d + sync_out = drm_syncobj_find(file_priv, args->out_sync); + if (sync_out) { + drm_syncobj_replace_fence(sync_out, +- &exec->render.base.s_fence->finished); ++ exec->render_done_fence); + drm_syncobj_put(sync_out); + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0512-staging-bcm2835-codec-Convert-V4L2-nsec-timestamps-t.patch b/target/linux/brcm2708/patches-4.19/950-0512-staging-bcm2835-codec-Convert-V4L2-nsec-timestamps-t.patch deleted file mode 100644 index 63eae876d6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0512-staging-bcm2835-codec-Convert-V4L2-nsec-timestamps-t.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 3da653227926705fe0dcb7b6057be1ca811f47b8 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 10 May 2019 14:11:58 +0100 -Subject: [PATCH 512/806] staging: bcm2835-codec: Convert V4L2 nsec timestamps - to MMAL usec - -V4L2 uses nsecs, whilst MMAL uses usecs, but the code wasn't converting -between them. This upsets video encode rate control. - -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -823,7 +823,8 @@ static void op_buffer_cb(struct vchiq_mm - vb2->flags |= V4L2_BUF_FLAG_LAST; - } - -- vb2->vb2_buf.timestamp = mmal_buf->pts; -+ /* vb2 timestamps in nsecs, mmal in usecs */ -+ vb2->vb2_buf.timestamp = mmal_buf->pts * 1000; - - vb2_set_plane_payload(&vb2->vb2_buf, 0, mmal_buf->length); - if (mmal_buf->mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) -@@ -847,6 +848,7 @@ static void op_buffer_cb(struct vchiq_mm - static void vb2_to_mmal_buffer(struct m2m_mmal_buffer *buf, - struct vb2_v4l2_buffer *vb2) - { -+ u64 pts; - buf->mmal.mmal_flags = 0; - if (vb2->flags & V4L2_BUF_FLAG_KEYFRAME) - buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_KEYFRAME; -@@ -869,7 +871,10 @@ static void vb2_to_mmal_buffer(struct m2 - if (!buf->mmal.length || vb2->flags & V4L2_BUF_FLAG_LAST) - buf->mmal.mmal_flags |= MMAL_BUFFER_HEADER_FLAG_EOS; - -- buf->mmal.pts = vb2->vb2_buf.timestamp; -+ /* vb2 timestamps in nsecs, mmal in usecs */ -+ pts = vb2->vb2_buf.timestamp; -+ do_div(pts, 1000); -+ buf->mmal.pts = pts; - buf->mmal.dts = MMAL_TIME_UNKNOWN; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0513-drm-v3d-Add-a-little-debugfs-entry-for-measuring-the.patch b/target/linux/brcm2708/patches-4.19/950-0513-drm-v3d-Add-a-little-debugfs-entry-for-measuring-the.patch new file mode 100644 index 0000000000..847bb2089b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0513-drm-v3d-Add-a-little-debugfs-entry-for-measuring-the.patch @@ -0,0 +1,106 @@ +From 18f93916e42ea25fc77cab20d1e038620e33d741 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 28 Sep 2018 16:21:24 -0700 +Subject: [PATCH] drm/v3d: Add a little debugfs entry for measuring the + core clock. + +This adds just enough performance counter support to measure the +clock. We don't have linux kernel drivers for the clock driving the +HW, and this was useful for determining that the V3D HW is running on +a slow clock, not that the driver was slow. + +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-2-eric@anholt.net +Reviewed-by: Boris Brezillon +(cherry picked from commit 6915c9a525e575732429c22b28eb11871a29374b) +--- + drivers/gpu/drm/v3d/v3d_debugfs.c | 35 +++++++++++++++++++++++++++++++ + drivers/gpu/drm/v3d/v3d_regs.h | 30 ++++++++++++++++++++++++++ + 2 files changed, 65 insertions(+) + +--- a/drivers/gpu/drm/v3d/v3d_debugfs.c ++++ b/drivers/gpu/drm/v3d/v3d_debugfs.c +@@ -179,9 +179,44 @@ static int v3d_debugfs_bo_stats(struct s + return 0; + } + ++static int v3d_measure_clock(struct seq_file *m, void *unused) ++{ ++ struct drm_info_node *node = (struct drm_info_node *)m->private; ++ struct drm_device *dev = node->minor->dev; ++ struct v3d_dev *v3d = to_v3d_dev(dev); ++ uint32_t cycles; ++ int core = 0; ++ int measure_ms = 1000; ++ ++ if (v3d->ver >= 40) { ++ V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3, ++ V3D_SET_FIELD(V3D_PCTR_CYCLE_COUNT, ++ V3D_PCTR_S0)); ++ V3D_CORE_WRITE(core, V3D_V4_PCTR_0_CLR, 1); ++ V3D_CORE_WRITE(core, V3D_V4_PCTR_0_EN, 1); ++ } else { ++ V3D_CORE_WRITE(core, V3D_V3_PCTR_0_PCTRS0, ++ V3D_PCTR_CYCLE_COUNT); ++ V3D_CORE_WRITE(core, V3D_V3_PCTR_0_CLR, 1); ++ V3D_CORE_WRITE(core, V3D_V3_PCTR_0_EN, ++ V3D_V3_PCTR_0_EN_ENABLE | ++ 1); ++ } ++ msleep(measure_ms); ++ cycles = V3D_CORE_READ(core, V3D_PCTR_0_PCTR0); ++ ++ seq_printf(m, "cycles: %d (%d.%d Mhz)\n", ++ cycles, ++ cycles / (measure_ms * 1000), ++ (cycles / (measure_ms * 100)) % 10); ++ ++ return 0; ++} ++ + static const struct drm_info_list v3d_debugfs_list[] = { + {"v3d_ident", v3d_v3d_debugfs_ident, 0}, + {"v3d_regs", v3d_v3d_debugfs_regs, 0}, ++ {"measure_clock", v3d_measure_clock, 0}, + {"bo_stats", v3d_debugfs_bo_stats, 0}, + }; + +--- a/drivers/gpu/drm/v3d/v3d_regs.h ++++ b/drivers/gpu/drm/v3d/v3d_regs.h +@@ -267,6 +267,36 @@ + # define V3D_PTB_BXCF_RWORDERDISA BIT(1) + # define V3D_PTB_BXCF_CLIPDISA BIT(0) + ++#define V3D_V3_PCTR_0_EN 0x00674 ++#define V3D_V3_PCTR_0_EN_ENABLE BIT(31) ++#define V3D_V4_PCTR_0_EN 0x00650 ++/* When a bit is set, resets the counter to 0. */ ++#define V3D_V3_PCTR_0_CLR 0x00670 ++#define V3D_V4_PCTR_0_CLR 0x00654 ++#define V3D_PCTR_0_OVERFLOW 0x00658 ++ ++#define V3D_V3_PCTR_0_PCTRS0 0x00684 ++#define V3D_V3_PCTR_0_PCTRS15 0x00660 ++#define V3D_V3_PCTR_0_PCTRSX(x) (V3D_V3_PCTR_0_PCTRS0 + \ ++ 4 * (x)) ++/* Each src reg muxes four counters each. */ ++#define V3D_V4_PCTR_0_SRC_0_3 0x00660 ++#define V3D_V4_PCTR_0_SRC_28_31 0x0067c ++# define V3D_PCTR_S0_MASK V3D_MASK(6, 0) ++# define V3D_PCTR_S0_SHIFT 0 ++# define V3D_PCTR_S1_MASK V3D_MASK(14, 8) ++# define V3D_PCTR_S1_SHIFT 8 ++# define V3D_PCTR_S2_MASK V3D_MASK(22, 16) ++# define V3D_PCTR_S2_SHIFT 16 ++# define V3D_PCTR_S3_MASK V3D_MASK(30, 24) ++# define V3D_PCTR_S3_SHIFT 24 ++# define V3D_PCTR_CYCLE_COUNT 32 ++ ++/* Output values of the counters. */ ++#define V3D_PCTR_0_PCTR0 0x00680 ++#define V3D_PCTR_0_PCTR31 0x006fc ++#define V3D_PCTR_0_PCTRX(x) (V3D_PCTR_0_PCTR0 + \ ++ 4 * (x)) + #define V3D_GMP_STATUS 0x00800 + # define V3D_GMP_STATUS_GMPRST BIT(31) + # define V3D_GMP_STATUS_WR_COUNT_MASK V3D_MASK(30, 24) diff --git a/target/linux/brcm2708/patches-4.19/950-0513-staging-bcm2835-codec-Add-support-for-setting-S_PARM.patch b/target/linux/brcm2708/patches-4.19/950-0513-staging-bcm2835-codec-Add-support-for-setting-S_PARM.patch deleted file mode 100644 index aea33ff02e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0513-staging-bcm2835-codec-Add-support-for-setting-S_PARM.patch +++ /dev/null @@ -1,118 +0,0 @@ -From 67c1f9dd0253a1175f77e801b19bd9d923225f9c Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 10 May 2019 14:13:11 +0100 -Subject: [PATCH 513/806] staging: bcm2835-codec: Add support for setting - S_PARM and G_PARM - -Video encode can use the frame rate for rate control calculations, -therefore plumb it through from V4L2's [S|G]_PARM ioctl. - -Signed-off-by: Dave Stevenson ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 52 +++++++++++++++++-- - 1 file changed, 48 insertions(+), 4 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -447,6 +447,8 @@ struct bcm2835_codec_ctx { - /* Source and destination queue data */ - struct bcm2835_codec_q_data q_data[2]; - s32 bitrate; -+ unsigned int framerate_num; -+ unsigned int framerate_denom; - - bool aborting; - int num_ip_buffers; -@@ -610,8 +612,8 @@ static void setup_mmal_port_format(struc - port->es.video.height = q_data->height; - port->es.video.crop.width = q_data->crop_width; - port->es.video.crop.height = q_data->crop_height; -- port->es.video.frame_rate.num = 0; -- port->es.video.frame_rate.den = 1; -+ port->es.video.frame_rate.num = ctx->framerate_num; -+ port->es.video.frame_rate.den = ctx->framerate_denom; - } else { - /* Compressed format - leave resolution as 0 for decode */ - if (ctx->dev->role == DECODE) { -@@ -625,9 +627,9 @@ static void setup_mmal_port_format(struc - port->es.video.crop.width = q_data->crop_width; - port->es.video.crop.height = q_data->crop_height; - port->format.bitrate = ctx->bitrate; -+ port->es.video.frame_rate.num = ctx->framerate_num; -+ port->es.video.frame_rate.den = ctx->framerate_denom; - } -- port->es.video.frame_rate.num = 0; -- port->es.video.frame_rate.den = 1; - } - port->es.video.crop.x = 0; - port->es.video.crop.y = 0; -@@ -1361,6 +1363,41 @@ static int vidioc_s_selection(struct fil - return 0; - } - -+static int vidioc_s_parm(struct file *file, void *priv, -+ struct v4l2_streamparm *parm) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ -+ if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) -+ return -EINVAL; -+ -+ ctx->framerate_num = -+ parm->parm.output.timeperframe.denominator; -+ ctx->framerate_denom = -+ parm->parm.output.timeperframe.numerator; -+ -+ parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME; -+ -+ return 0; -+} -+ -+static int vidioc_g_parm(struct file *file, void *priv, -+ struct v4l2_streamparm *parm) -+{ -+ struct bcm2835_codec_ctx *ctx = file2ctx(file); -+ -+ if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) -+ return -EINVAL; -+ -+ parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME; -+ parm->parm.output.timeperframe.denominator = -+ ctx->framerate_num; -+ parm->parm.output.timeperframe.numerator = -+ ctx->framerate_denom; -+ -+ return 0; -+} -+ - static int vidioc_subscribe_evt(struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub) - { -@@ -1725,6 +1762,9 @@ static const struct v4l2_ioctl_ops bcm28 - .vidioc_g_selection = vidioc_g_selection, - .vidioc_s_selection = vidioc_s_selection, - -+ .vidioc_g_parm = vidioc_g_parm, -+ .vidioc_s_parm = vidioc_s_parm, -+ - .vidioc_subscribe_event = vidioc_subscribe_evt, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, - -@@ -2546,6 +2586,8 @@ static int bcm2835_codec_create(struct p - case DECODE: - v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD); - v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); -+ v4l2_disable_ioctl(vfd, VIDIOC_S_PARM); -+ v4l2_disable_ioctl(vfd, VIDIOC_G_PARM); - video_nr = decode_video_nr; - break; - case ENCODE: -@@ -2558,6 +2600,8 @@ static int bcm2835_codec_create(struct p - v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); - v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); - v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); -+ v4l2_disable_ioctl(vfd, VIDIOC_S_PARM); -+ v4l2_disable_ioctl(vfd, VIDIOC_G_PARM); - video_nr = isp_video_nr; - break; - default: diff --git a/target/linux/brcm2708/patches-4.19/950-0514-drm-v3d-Update-a-comment-about-what-uses-v3d_job_dep.patch b/target/linux/brcm2708/patches-4.19/950-0514-drm-v3d-Update-a-comment-about-what-uses-v3d_job_dep.patch new file mode 100644 index 0000000000..e5068090ab --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0514-drm-v3d-Update-a-comment-about-what-uses-v3d_job_dep.patch @@ -0,0 +1,27 @@ +From 6351d93a0f1a18c45c4407c472195d957da5d3d0 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 8 Nov 2018 08:16:52 -0800 +Subject: [PATCH] drm/v3d: Update a comment about what uses + v3d_job_dependency(). + +I merged bin and render's paths in a late refactoring. + +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-3-eric@anholt.net +Reviewed-by: Boris Brezillon +(cherry picked from commit e90e45f6bd45cc494a6f4cd1853c5e7cd4be7f68) +--- + drivers/gpu/drm/v3d/v3d_sched.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/v3d/v3d_sched.c ++++ b/drivers/gpu/drm/v3d/v3d_sched.c +@@ -39,7 +39,7 @@ v3d_job_free(struct drm_sched_job *sched + } + + /** +- * Returns the fences that the bin job depends on, one by one. ++ * Returns the fences that the bin or render job depends on, one by one. + * v3d_job_run() won't be called until all of them have been signaled. + */ + static struct dma_fence * diff --git a/target/linux/brcm2708/patches-4.19/950-0514-w1-w1-gpio-Make-GPIO-an-output-for-strong-pullup.patch b/target/linux/brcm2708/patches-4.19/950-0514-w1-w1-gpio-Make-GPIO-an-output-for-strong-pullup.patch deleted file mode 100644 index 64e670b710..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0514-w1-w1-gpio-Make-GPIO-an-output-for-strong-pullup.patch +++ /dev/null @@ -1,27 +0,0 @@ -From afea1f84cbda94c47ba4a8f84d16c4330e145a0a Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 12 Jun 2019 17:15:05 +0100 -Subject: [PATCH 514/806] w1: w1-gpio: Make GPIO an output for strong pullup - -The logic to drive the data line high to implement a strong pullup -assumed that the pin was already an output - setting a value does -not change an input. - -See: https://github.com/raspberrypi/firmware/issues/1143 - -Signed-off-by: Phil Elwell ---- - drivers/w1/masters/w1-gpio.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/w1/masters/w1-gpio.c -+++ b/drivers/w1/masters/w1-gpio.c -@@ -33,7 +33,7 @@ static u8 w1_gpio_set_pullup(void *data, - * This will OVERRIDE open drain emulation and force-pull - * the line high for some time. - */ -- gpiod_set_raw_value(pdata->gpiod, 1); -+ gpiod_direction_output_raw(pdata->gpiod, 1); - msleep(pdata->pullup_duration); - /* - * This will simply set the line as input since we are doing diff --git a/target/linux/brcm2708/patches-4.19/950-0515-drm-v3d-Clean-up-the-reservation-object-setup.patch b/target/linux/brcm2708/patches-4.19/950-0515-drm-v3d-Clean-up-the-reservation-object-setup.patch new file mode 100644 index 0000000000..94156e72b4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0515-drm-v3d-Clean-up-the-reservation-object-setup.patch @@ -0,0 +1,102 @@ +From 5ca5bd799b4f4a065b969461fa7852415bfb8c6f Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 8 Nov 2018 08:16:53 -0800 +Subject: [PATCH] drm/v3d: Clean up the reservation object setup. + +The extra to_v3d_bo() calls came from copying this from the vc4 +driver, which stored the cma gem object in the structs. + +v2: Fix an unused var warning + +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-4-eric@anholt.net +Reviewed-by: Boris Brezillon (v1) +(cherry picked from commit 8f1cd826641d677d0f7494253ecfc3335f0bcd4e) +--- + drivers/gpu/drm/v3d/v3d_gem.c | 33 +++++++++++---------------------- + 1 file changed, 11 insertions(+), 22 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -210,14 +210,11 @@ static void + v3d_attach_object_fences(struct v3d_exec_info *exec) + { + struct dma_fence *out_fence = exec->render_done_fence; +- struct v3d_bo *bo; + int i; + + for (i = 0; i < exec->bo_count; i++) { +- bo = to_v3d_bo(&exec->bo[i]->base); +- + /* XXX: Use shared fences for read-only objects. */ +- reservation_object_add_excl_fence(bo->resv, out_fence); ++ reservation_object_add_excl_fence(exec->bo[i]->resv, out_fence); + } + } + +@@ -228,11 +225,8 @@ v3d_unlock_bo_reservations(struct drm_de + { + int i; + +- for (i = 0; i < exec->bo_count; i++) { +- struct v3d_bo *bo = to_v3d_bo(&exec->bo[i]->base); +- +- ww_mutex_unlock(&bo->resv->lock); +- } ++ for (i = 0; i < exec->bo_count; i++) ++ ww_mutex_unlock(&exec->bo[i]->resv->lock); + + ww_acquire_fini(acquire_ctx); + } +@@ -251,13 +245,13 @@ v3d_lock_bo_reservations(struct drm_devi + { + int contended_lock = -1; + int i, ret; +- struct v3d_bo *bo; + + ww_acquire_init(acquire_ctx, &reservation_ww_class); + + retry: + if (contended_lock != -1) { +- bo = to_v3d_bo(&exec->bo[contended_lock]->base); ++ struct v3d_bo *bo = exec->bo[contended_lock]; ++ + ret = ww_mutex_lock_slow_interruptible(&bo->resv->lock, + acquire_ctx); + if (ret) { +@@ -270,19 +264,16 @@ retry: + if (i == contended_lock) + continue; + +- bo = to_v3d_bo(&exec->bo[i]->base); +- +- ret = ww_mutex_lock_interruptible(&bo->resv->lock, acquire_ctx); ++ ret = ww_mutex_lock_interruptible(&exec->bo[i]->resv->lock, ++ acquire_ctx); + if (ret) { + int j; + +- for (j = 0; j < i; j++) { +- bo = to_v3d_bo(&exec->bo[j]->base); +- ww_mutex_unlock(&bo->resv->lock); +- } ++ for (j = 0; j < i; j++) ++ ww_mutex_unlock(&exec->bo[j]->resv->lock); + + if (contended_lock != -1 && contended_lock >= i) { +- bo = to_v3d_bo(&exec->bo[contended_lock]->base); ++ struct v3d_bo *bo = exec->bo[contended_lock]; + + ww_mutex_unlock(&bo->resv->lock); + } +@@ -303,9 +294,7 @@ retry: + * before we commit the CL to the hardware. + */ + for (i = 0; i < exec->bo_count; i++) { +- bo = to_v3d_bo(&exec->bo[i]->base); +- +- ret = reservation_object_reserve_shared(bo->resv); ++ ret = reservation_object_reserve_shared(exec->bo[i]->resv); + if (ret) { + v3d_unlock_bo_reservations(dev, exec, acquire_ctx); + return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0515-overlays-Update-w1-gpio-and-w1-gpio-pullup.patch b/target/linux/brcm2708/patches-4.19/950-0515-overlays-Update-w1-gpio-and-w1-gpio-pullup.patch deleted file mode 100644 index fed2149355..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0515-overlays-Update-w1-gpio-and-w1-gpio-pullup.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 531ae7af75b2be2867814693f069fb51e3155341 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 12 Jun 2019 17:32:11 +0100 -Subject: [PATCH 515/806] overlays: Update w1-gpio and w1-gpio-pullup - -The parasitic power (power on data) feature is now enabled by -default in the w1-gpio driver, so update the README and make the -"pullup" parameter a no-op. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 9 ++------- - arch/arm/boot/dts/overlays/w1-gpio-overlay.dts | 3 +-- - arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts | 3 +-- - 3 files changed, 4 insertions(+), 11 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -2261,9 +2261,7 @@ Info: Configures the w1-gpio Onewire i - Use this overlay if you *don't* need a GPIO to drive an external pullup. - Load: dtoverlay=w1-gpio,= - Params: gpiopin GPIO for I/O (default "4") -- -- pullup Non-zero, "on", or "y" to enable the parasitic -- power (2-wire, power-on-data) feature -+ pullup Now enabled by default (ignored) - - - Name: w1-gpio-pullup -@@ -2271,11 +2269,8 @@ Info: Configures the w1-gpio Onewire i - Use this overlay if you *do* need a GPIO to drive an external pullup. - Load: dtoverlay=w1-gpio-pullup,= - Params: gpiopin GPIO for I/O (default "4") -- -- pullup Non-zero, "on", or "y" to enable the parasitic -- power (2-wire, power-on-data) feature -- - extpullup GPIO for external pullup (default "5") -+ pullup Now enabled by default (ignored) - - - Name: wittypi ---- a/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts -@@ -14,7 +14,6 @@ - pinctrl-names = "default"; - pinctrl-0 = <&w1_pins>; - gpios = <&gpio 4 0>; -- rpi,parasitic-power = <0>; - status = "okay"; - }; - }; -@@ -36,6 +35,6 @@ - <&w1>,"reg:0", - <&w1_pins>,"brcm,pins:0", - <&w1_pins>,"reg:0"; -- pullup = <&w1>,"rpi,parasitic-power:0"; -+ pullup; // Silently ignore unneeded parameter - }; - }; ---- a/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts -+++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts -@@ -14,7 +14,6 @@ - pinctrl-names = "default"; - pinctrl-0 = <&w1_pins>; - gpios = <&gpio 4 0>, <&gpio 5 1>; -- rpi,parasitic-power = <0>; - status = "okay"; - }; - }; -@@ -38,6 +37,6 @@ - <&w1_pins>,"reg:0"; - extpullup = <&w1>,"gpios:16", - <&w1_pins>,"brcm,pins:4"; -- pullup = <&w1>,"rpi,parasitic-power:0"; -+ pullup; // Silently ignore unneeded parameter - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0516-bcm2835-sdhost-Fix-DMA-channel-leak-on-error-remove.patch b/target/linux/brcm2708/patches-4.19/950-0516-bcm2835-sdhost-Fix-DMA-channel-leak-on-error-remove.patch deleted file mode 100644 index 47e236916e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0516-bcm2835-sdhost-Fix-DMA-channel-leak-on-error-remove.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 73623c76c8bc8c41a4afefc1eee84dfc5979d652 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 12 Jun 2019 20:45:17 +0100 -Subject: [PATCH 516/806] bcm2835-sdhost: Fix DMA channel leak on error/remove - -Signed-off-by: Phil Elwell ---- - drivers/mmc/host/bcm2835-sdhost.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/mmc/host/bcm2835-sdhost.c -+++ b/drivers/mmc/host/bcm2835-sdhost.c -@@ -2154,6 +2154,8 @@ static int bcm2835_sdhost_probe(struct p - - err: - pr_debug("bcm2835_sdhost_probe -> err %d\n", ret); -+ if (host->dma_chan_rxtx) -+ dma_release_channel(host->dma_chan_rxtx); - mmc_free_host(mmc); - - return ret; -@@ -2174,7 +2176,8 @@ static int bcm2835_sdhost_remove(struct - del_timer_sync(&host->timer); - - tasklet_kill(&host->finish_tasklet); -- -+ if (host->dma_chan_rxtx) -+ dma_release_channel(host->dma_chan_rxtx); - mmc_free_host(host->mmc); - platform_set_drvdata(pdev, NULL); - diff --git a/target/linux/brcm2708/patches-4.19/950-0516-drm-v3d-Add-support-for-submitting-jobs-to-the-TFU.patch b/target/linux/brcm2708/patches-4.19/950-0516-drm-v3d-Add-support-for-submitting-jobs-to-the-TFU.patch new file mode 100644 index 0000000000..99b1a69c09 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0516-drm-v3d-Add-support-for-submitting-jobs-to-the-TFU.patch @@ -0,0 +1,802 @@ +From ba1e90b6c3b3bf0e88ab01c824c4f8fde582e878 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 28 Nov 2018 15:09:25 -0800 +Subject: [PATCH] drm/v3d: Add support for submitting jobs to the TFU. + +The TFU can copy from raster, UIF, and SAND input images to UIF output +images, with optional mipmap generation. This will certainly be +useful for media EGL image input, but is also useful immediately for +mipmap generation without bogging the V3D core down. + +For now we only run the queue 1 job deep, and don't have any hang +recovery (though I don't think we should need it, with TFU). Queuing +multiple jobs in the HW will require synchronizing the YUV coefficient +regs updates since they don't get FIFOed with the job. + +v2: Change the ioctl to IOW instead of IOWR, always set COEF0, explain + why TFU is AUTH, clarify the syncing docs, drop the unused TFU + interrupt regs (you're expected to use the hub's), don't take + &bo->base for NULL bos. +v3: Fix a little whitespace alignment (noticed by checkpatch), rebase + on drm_sched_job_cleanup() changes. + +Signed-off-by: Eric Anholt +Reviewed-by: Dave Emett (v2) +Link: https://patchwork.freedesktop.org/patch/264607/ +(cherry picked from commit 1584f16ca96ef124aad79efa3303cff5f3530e2c) +--- + drivers/gpu/drm/v3d/v3d_drv.c | 15 ++- + drivers/gpu/drm/v3d/v3d_drv.h | 32 +++++- + drivers/gpu/drm/v3d/v3d_gem.c | 178 ++++++++++++++++++++++++++++---- + drivers/gpu/drm/v3d/v3d_irq.c | 12 ++- + drivers/gpu/drm/v3d/v3d_regs.h | 49 +++++++++ + drivers/gpu/drm/v3d/v3d_sched.c | 148 ++++++++++++++++++++++---- + drivers/gpu/drm/v3d/v3d_trace.h | 20 ++++ + include/uapi/drm/v3d_drm.h | 25 +++++ + 8 files changed, 426 insertions(+), 53 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_drv.c ++++ b/drivers/gpu/drm/v3d/v3d_drv.c +@@ -112,10 +112,15 @@ static int v3d_get_param_ioctl(struct dr + return 0; + } + +- /* Any params that aren't just register reads would go here. */ + +- DRM_DEBUG("Unknown parameter %d\n", args->param); +- return -EINVAL; ++ switch (args->param) { ++ case DRM_V3D_PARAM_SUPPORTS_TFU: ++ args->value = 1; ++ return 0; ++ default: ++ DRM_DEBUG("Unknown parameter %d\n", args->param); ++ return -EINVAL; ++ } + } + + static int +@@ -170,7 +175,8 @@ static const struct file_operations v3d_ + /* DRM_AUTH is required on SUBMIT_CL for now, while we don't have GMP + * protection between clients. Note that render nodes would be be + * able to submit CLs that could access BOs from clients authenticated +- * with the master node. ++ * with the master node. The TFU doesn't use the GMP, so it would ++ * need to stay DRM_AUTH until we do buffer size/offset validation. + */ + static const struct drm_ioctl_desc v3d_drm_ioctls[] = { + DRM_IOCTL_DEF_DRV(V3D_SUBMIT_CL, v3d_submit_cl_ioctl, DRM_RENDER_ALLOW | DRM_AUTH), +@@ -179,6 +185,7 @@ static const struct drm_ioctl_desc v3d_d + DRM_IOCTL_DEF_DRV(V3D_MMAP_BO, v3d_mmap_bo_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(V3D_GET_PARAM, v3d_get_param_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(V3D_GET_BO_OFFSET, v3d_get_bo_offset_ioctl, DRM_RENDER_ALLOW), ++ DRM_IOCTL_DEF_DRV(V3D_SUBMIT_TFU, v3d_submit_tfu_ioctl, DRM_RENDER_ALLOW | DRM_AUTH), + }; + + static const struct vm_operations_struct v3d_vm_ops = { +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -7,19 +7,18 @@ + #include + #include + #include ++#include "uapi/drm/v3d_drm.h" + + #define GMP_GRANULARITY (128 * 1024) + +-/* Enum for each of the V3D queues. We maintain various queue +- * tracking as an array because at some point we'll want to support +- * the TFU (texture formatting unit) as another queue. +- */ ++/* Enum for each of the V3D queues. */ + enum v3d_queue { + V3D_BIN, + V3D_RENDER, ++ V3D_TFU, + }; + +-#define V3D_MAX_QUEUES (V3D_RENDER + 1) ++#define V3D_MAX_QUEUES (V3D_TFU + 1) + + struct v3d_queue_state { + struct drm_gpu_scheduler sched; +@@ -68,6 +67,7 @@ struct v3d_dev { + + struct v3d_exec_info *bin_job; + struct v3d_exec_info *render_job; ++ struct v3d_tfu_job *tfu_job; + + struct v3d_queue_state queue[V3D_MAX_QUEUES]; + +@@ -218,6 +218,25 @@ struct v3d_exec_info { + u32 qma, qms, qts; + }; + ++struct v3d_tfu_job { ++ struct drm_sched_job base; ++ ++ struct drm_v3d_submit_tfu args; ++ ++ /* An optional fence userspace can pass in for the job to depend on. */ ++ struct dma_fence *in_fence; ++ ++ /* v3d fence to be signaled by IRQ handler when the job is complete. */ ++ struct dma_fence *done_fence; ++ ++ struct v3d_dev *v3d; ++ ++ struct kref refcount; ++ ++ /* This is the array of BOs that were looked up at the start of exec. */ ++ struct v3d_bo *bo[4]; ++}; ++ + /** + * _wait_for - magic (register) wait macro + * +@@ -281,9 +300,12 @@ int v3d_gem_init(struct drm_device *dev) + void v3d_gem_destroy(struct drm_device *dev); + int v3d_submit_cl_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); ++int v3d_submit_tfu_ioctl(struct drm_device *dev, void *data, ++ struct drm_file *file_priv); + int v3d_wait_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); + void v3d_exec_put(struct v3d_exec_info *exec); ++void v3d_tfu_job_put(struct v3d_tfu_job *exec); + void v3d_reset(struct v3d_dev *v3d); + void v3d_invalidate_caches(struct v3d_dev *v3d); + void v3d_flush_caches(struct v3d_dev *v3d); +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -207,26 +207,27 @@ v3d_flush_caches(struct v3d_dev *v3d) + } + + static void +-v3d_attach_object_fences(struct v3d_exec_info *exec) ++v3d_attach_object_fences(struct v3d_bo **bos, int bo_count, ++ struct dma_fence *fence) + { +- struct dma_fence *out_fence = exec->render_done_fence; + int i; + +- for (i = 0; i < exec->bo_count; i++) { ++ for (i = 0; i < bo_count; i++) { + /* XXX: Use shared fences for read-only objects. */ +- reservation_object_add_excl_fence(exec->bo[i]->resv, out_fence); ++ reservation_object_add_excl_fence(bos[i]->resv, fence); + } + } + + static void + v3d_unlock_bo_reservations(struct drm_device *dev, +- struct v3d_exec_info *exec, ++ struct v3d_bo **bos, ++ int bo_count, + struct ww_acquire_ctx *acquire_ctx) + { + int i; + +- for (i = 0; i < exec->bo_count; i++) +- ww_mutex_unlock(&exec->bo[i]->resv->lock); ++ for (i = 0; i < bo_count; i++) ++ ww_mutex_unlock(&bos[i]->resv->lock); + + ww_acquire_fini(acquire_ctx); + } +@@ -240,7 +241,8 @@ v3d_unlock_bo_reservations(struct drm_de + */ + static int + v3d_lock_bo_reservations(struct drm_device *dev, +- struct v3d_exec_info *exec, ++ struct v3d_bo **bos, ++ int bo_count, + struct ww_acquire_ctx *acquire_ctx) + { + int contended_lock = -1; +@@ -250,7 +252,7 @@ v3d_lock_bo_reservations(struct drm_devi + + retry: + if (contended_lock != -1) { +- struct v3d_bo *bo = exec->bo[contended_lock]; ++ struct v3d_bo *bo = bos[contended_lock]; + + ret = ww_mutex_lock_slow_interruptible(&bo->resv->lock, + acquire_ctx); +@@ -260,20 +262,20 @@ retry: + } + } + +- for (i = 0; i < exec->bo_count; i++) { ++ for (i = 0; i < bo_count; i++) { + if (i == contended_lock) + continue; + +- ret = ww_mutex_lock_interruptible(&exec->bo[i]->resv->lock, ++ ret = ww_mutex_lock_interruptible(&bos[i]->resv->lock, + acquire_ctx); + if (ret) { + int j; + + for (j = 0; j < i; j++) +- ww_mutex_unlock(&exec->bo[j]->resv->lock); ++ ww_mutex_unlock(&bos[j]->resv->lock); + + if (contended_lock != -1 && contended_lock >= i) { +- struct v3d_bo *bo = exec->bo[contended_lock]; ++ struct v3d_bo *bo = bos[contended_lock]; + + ww_mutex_unlock(&bo->resv->lock); + } +@@ -293,10 +295,11 @@ retry: + /* Reserve space for our shared (read-only) fence references, + * before we commit the CL to the hardware. + */ +- for (i = 0; i < exec->bo_count; i++) { +- ret = reservation_object_reserve_shared(exec->bo[i]->resv); ++ for (i = 0; i < bo_count; i++) { ++ ret = reservation_object_reserve_shared(bos[i]->resv); + if (ret) { +- v3d_unlock_bo_reservations(dev, exec, acquire_ctx); ++ v3d_unlock_bo_reservations(dev, bos, bo_count, ++ acquire_ctx); + return ret; + } + } +@@ -419,6 +422,33 @@ void v3d_exec_put(struct v3d_exec_info * + kref_put(&exec->refcount, v3d_exec_cleanup); + } + ++static void ++v3d_tfu_job_cleanup(struct kref *ref) ++{ ++ struct v3d_tfu_job *job = container_of(ref, struct v3d_tfu_job, ++ refcount); ++ struct v3d_dev *v3d = job->v3d; ++ unsigned int i; ++ ++ dma_fence_put(job->in_fence); ++ dma_fence_put(job->done_fence); ++ ++ for (i = 0; i < ARRAY_SIZE(job->bo); i++) { ++ if (job->bo[i]) ++ drm_gem_object_put_unlocked(&job->bo[i]->base); ++ } ++ ++ pm_runtime_mark_last_busy(v3d->dev); ++ pm_runtime_put_autosuspend(v3d->dev); ++ ++ kfree(job); ++} ++ ++void v3d_tfu_job_put(struct v3d_tfu_job *job) ++{ ++ kref_put(&job->refcount, v3d_tfu_job_cleanup); ++} ++ + int + v3d_wait_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +@@ -536,7 +566,8 @@ v3d_submit_cl_ioctl(struct drm_device *d + if (ret) + goto fail; + +- ret = v3d_lock_bo_reservations(dev, exec, &acquire_ctx); ++ ret = v3d_lock_bo_reservations(dev, exec->bo, exec->bo_count, ++ &acquire_ctx); + if (ret) + goto fail; + +@@ -570,9 +601,10 @@ v3d_submit_cl_ioctl(struct drm_device *d + &v3d_priv->sched_entity[V3D_RENDER]); + mutex_unlock(&v3d->sched_lock); + +- v3d_attach_object_fences(exec); ++ v3d_attach_object_fences(exec->bo, exec->bo_count, ++ exec->render_done_fence); + +- v3d_unlock_bo_reservations(dev, exec, &acquire_ctx); ++ v3d_unlock_bo_reservations(dev, exec->bo, exec->bo_count, &acquire_ctx); + + /* Update the return sync object for the */ + sync_out = drm_syncobj_find(file_priv, args->out_sync); +@@ -588,12 +620,118 @@ v3d_submit_cl_ioctl(struct drm_device *d + + fail_unreserve: + mutex_unlock(&v3d->sched_lock); +- v3d_unlock_bo_reservations(dev, exec, &acquire_ctx); ++ v3d_unlock_bo_reservations(dev, exec->bo, exec->bo_count, &acquire_ctx); + fail: + v3d_exec_put(exec); + + return ret; + } ++ ++/** ++ * v3d_submit_tfu_ioctl() - Submits a TFU (texture formatting) job to the V3D. ++ * @dev: DRM device ++ * @data: ioctl argument ++ * @file_priv: DRM file for this fd ++ * ++ * Userspace provides the register setup for the TFU, which we don't ++ * need to validate since the TFU is behind the MMU. ++ */ ++int ++v3d_submit_tfu_ioctl(struct drm_device *dev, void *data, ++ struct drm_file *file_priv) ++{ ++ struct v3d_dev *v3d = to_v3d_dev(dev); ++ struct v3d_file_priv *v3d_priv = file_priv->driver_priv; ++ struct drm_v3d_submit_tfu *args = data; ++ struct v3d_tfu_job *job; ++ struct ww_acquire_ctx acquire_ctx; ++ struct drm_syncobj *sync_out; ++ struct dma_fence *sched_done_fence; ++ int ret = 0; ++ int bo_count; ++ ++ job = kcalloc(1, sizeof(*job), GFP_KERNEL); ++ if (!job) ++ return -ENOMEM; ++ ++ ret = pm_runtime_get_sync(v3d->dev); ++ if (ret < 0) { ++ kfree(job); ++ return ret; ++ } ++ ++ kref_init(&job->refcount); ++ ++ ret = drm_syncobj_find_fence(file_priv, args->in_sync, ++ 0, &job->in_fence); ++ if (ret == -EINVAL) ++ goto fail; ++ ++ job->args = *args; ++ job->v3d = v3d; ++ ++ spin_lock(&file_priv->table_lock); ++ for (bo_count = 0; bo_count < ARRAY_SIZE(job->bo); bo_count++) { ++ struct drm_gem_object *bo; ++ ++ if (!args->bo_handles[bo_count]) ++ break; ++ ++ bo = idr_find(&file_priv->object_idr, ++ args->bo_handles[bo_count]); ++ if (!bo) { ++ DRM_DEBUG("Failed to look up GEM BO %d: %d\n", ++ bo_count, args->bo_handles[bo_count]); ++ ret = -ENOENT; ++ spin_unlock(&file_priv->table_lock); ++ goto fail; ++ } ++ drm_gem_object_get(bo); ++ job->bo[bo_count] = to_v3d_bo(bo); ++ } ++ spin_unlock(&file_priv->table_lock); ++ ++ ret = v3d_lock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); ++ if (ret) ++ goto fail; ++ ++ mutex_lock(&v3d->sched_lock); ++ ret = drm_sched_job_init(&job->base, ++ &v3d_priv->sched_entity[V3D_TFU], ++ v3d_priv); ++ if (ret) ++ goto fail_unreserve; ++ ++ sched_done_fence = dma_fence_get(&job->base.s_fence->finished); ++ ++ kref_get(&job->refcount); /* put by scheduler job completion */ ++ drm_sched_entity_push_job(&job->base, &v3d_priv->sched_entity[V3D_TFU]); ++ mutex_unlock(&v3d->sched_lock); ++ ++ v3d_attach_object_fences(job->bo, bo_count, sched_done_fence); ++ ++ v3d_unlock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); ++ ++ /* Update the return sync object */ ++ sync_out = drm_syncobj_find(file_priv, args->out_sync); ++ if (sync_out) { ++ drm_syncobj_replace_fence(sync_out, sched_done_fence); ++ drm_syncobj_put(sync_out); ++ } ++ dma_fence_put(sched_done_fence); ++ ++ v3d_tfu_job_put(job); ++ ++ return 0; ++ ++fail_unreserve: ++ mutex_unlock(&v3d->sched_lock); ++ v3d_unlock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); ++fail: ++ v3d_tfu_job_put(job); ++ ++ return ret; ++} + + int + v3d_gem_init(struct drm_device *dev) +--- a/drivers/gpu/drm/v3d/v3d_irq.c ++++ b/drivers/gpu/drm/v3d/v3d_irq.c +@@ -4,8 +4,8 @@ + /** + * DOC: Interrupt management for the V3D engine + * +- * When we take a binning or rendering flush done interrupt, we need +- * to signal the fence for that job so that the scheduler can queue up ++ * When we take a bin, render, or TFU done interrupt, we need to ++ * signal the fence for that job so that the scheduler can queue up + * the next one and unblock any waiters. + * + * When we take the binner out of memory interrupt, we need to +@@ -23,7 +23,8 @@ + + #define V3D_HUB_IRQS ((u32)(V3D_HUB_INT_MMU_WRV | \ + V3D_HUB_INT_MMU_PTI | \ +- V3D_HUB_INT_MMU_CAP)) ++ V3D_HUB_INT_MMU_CAP | \ ++ V3D_HUB_INT_TFUC)) + + static void + v3d_overflow_mem_work(struct work_struct *work) +@@ -117,6 +118,11 @@ v3d_hub_irq(int irq, void *arg) + /* Acknowledge the interrupts we're handling here. */ + V3D_WRITE(V3D_HUB_INT_CLR, intsts); + ++ if (intsts & V3D_HUB_INT_TFUC) { ++ dma_fence_signal(v3d->tfu_job->done_fence); ++ status = IRQ_HANDLED; ++ } ++ + if (intsts & (V3D_HUB_INT_MMU_WRV | + V3D_HUB_INT_MMU_PTI | + V3D_HUB_INT_MMU_CAP)) { +--- a/drivers/gpu/drm/v3d/v3d_regs.h ++++ b/drivers/gpu/drm/v3d/v3d_regs.h +@@ -86,6 +86,55 @@ + # define V3D_TOP_GR_BRIDGE_SW_INIT_1 0x0000c + # define V3D_TOP_GR_BRIDGE_SW_INIT_1_V3D_CLK_108_SW_INIT BIT(0) + ++#define V3D_TFU_CS 0x00400 ++/* Stops current job, empties input fifo. */ ++# define V3D_TFU_CS_TFURST BIT(31) ++# define V3D_TFU_CS_CVTCT_MASK V3D_MASK(23, 16) ++# define V3D_TFU_CS_CVTCT_SHIFT 16 ++# define V3D_TFU_CS_NFREE_MASK V3D_MASK(13, 8) ++# define V3D_TFU_CS_NFREE_SHIFT 8 ++# define V3D_TFU_CS_BUSY BIT(0) ++ ++#define V3D_TFU_SU 0x00404 ++/* Interrupt when FINTTHR input slots are free (0 = disabled) */ ++# define V3D_TFU_SU_FINTTHR_MASK V3D_MASK(13, 8) ++# define V3D_TFU_SU_FINTTHR_SHIFT 8 ++/* Skips resetting the CRC at the start of CRC generation. */ ++# define V3D_TFU_SU_CRCCHAIN BIT(4) ++/* skips writes, computes CRC of the image. miplevels must be 0. */ ++# define V3D_TFU_SU_CRC BIT(3) ++# define V3D_TFU_SU_THROTTLE_MASK V3D_MASK(1, 0) ++# define V3D_TFU_SU_THROTTLE_SHIFT 0 ++ ++#define V3D_TFU_ICFG 0x00408 ++/* Interrupt when the conversion is complete. */ ++# define V3D_TFU_ICFG_IOC BIT(0) ++ ++/* Input Image Address */ ++#define V3D_TFU_IIA 0x0040c ++/* Input Chroma Address */ ++#define V3D_TFU_ICA 0x00410 ++/* Input Image Stride */ ++#define V3D_TFU_IIS 0x00414 ++/* Input Image U-Plane Address */ ++#define V3D_TFU_IUA 0x00418 ++/* Output Image Address */ ++#define V3D_TFU_IOA 0x0041c ++/* Image Output Size */ ++#define V3D_TFU_IOS 0x00420 ++/* TFU YUV Coefficient 0 */ ++#define V3D_TFU_COEF0 0x00424 ++/* Use these regs instead of the defaults. */ ++# define V3D_TFU_COEF0_USECOEF BIT(31) ++/* TFU YUV Coefficient 1 */ ++#define V3D_TFU_COEF1 0x00428 ++/* TFU YUV Coefficient 2 */ ++#define V3D_TFU_COEF2 0x0042c ++/* TFU YUV Coefficient 3 */ ++#define V3D_TFU_COEF3 0x00430 ++ ++#define V3D_TFU_CRC 0x00434 ++ + /* Per-MMU registers. */ + + #define V3D_MMUC_CONTROL 0x01000 +--- a/drivers/gpu/drm/v3d/v3d_sched.c ++++ b/drivers/gpu/drm/v3d/v3d_sched.c +@@ -30,6 +30,12 @@ to_v3d_job(struct drm_sched_job *sched_j + return container_of(sched_job, struct v3d_job, base); + } + ++static struct v3d_tfu_job * ++to_tfu_job(struct drm_sched_job *sched_job) ++{ ++ return container_of(sched_job, struct v3d_tfu_job, base); ++} ++ + static void + v3d_job_free(struct drm_sched_job *sched_job) + { +@@ -38,6 +44,14 @@ v3d_job_free(struct drm_sched_job *sched + v3d_exec_put(job->exec); + } + ++static void ++v3d_tfu_job_free(struct drm_sched_job *sched_job) ++{ ++ struct v3d_tfu_job *job = to_tfu_job(sched_job); ++ ++ v3d_tfu_job_put(job); ++} ++ + /** + * Returns the fences that the bin or render job depends on, one by one. + * v3d_job_run() won't be called until all of them have been signaled. +@@ -76,6 +90,27 @@ v3d_job_dependency(struct drm_sched_job + return fence; + } + ++/** ++ * Returns the fences that the TFU job depends on, one by one. ++ * v3d_tfu_job_run() won't be called until all of them have been ++ * signaled. ++ */ ++static struct dma_fence * ++v3d_tfu_job_dependency(struct drm_sched_job *sched_job, ++ struct drm_sched_entity *s_entity) ++{ ++ struct v3d_tfu_job *job = to_tfu_job(sched_job); ++ struct dma_fence *fence; ++ ++ fence = job->in_fence; ++ if (fence) { ++ job->in_fence = NULL; ++ return fence; ++ } ++ ++ return NULL; ++} ++ + static struct dma_fence *v3d_job_run(struct drm_sched_job *sched_job) + { + struct v3d_job *job = to_v3d_job(sched_job); +@@ -147,31 +182,47 @@ static struct dma_fence *v3d_job_run(str + return fence; + } + +-static void +-v3d_job_timedout(struct drm_sched_job *sched_job) ++static struct dma_fence * ++v3d_tfu_job_run(struct drm_sched_job *sched_job) + { +- struct v3d_job *job = to_v3d_job(sched_job); +- struct v3d_exec_info *exec = job->exec; +- struct v3d_dev *v3d = exec->v3d; +- enum v3d_queue job_q = job == &exec->bin ? V3D_BIN : V3D_RENDER; +- enum v3d_queue q; +- u32 ctca = V3D_CORE_READ(0, V3D_CLE_CTNCA(job_q)); +- u32 ctra = V3D_CORE_READ(0, V3D_CLE_CTNRA(job_q)); ++ struct v3d_tfu_job *job = to_tfu_job(sched_job); ++ struct v3d_dev *v3d = job->v3d; ++ struct drm_device *dev = &v3d->drm; ++ struct dma_fence *fence; + +- /* If the current address or return address have changed, then +- * the GPU has probably made progress and we should delay the +- * reset. This could fail if the GPU got in an infinite loop +- * in the CL, but that is pretty unlikely outside of an i-g-t +- * testcase. +- */ +- if (job->timedout_ctca != ctca || job->timedout_ctra != ctra) { +- job->timedout_ctca = ctca; +- job->timedout_ctra = ctra; ++ fence = v3d_fence_create(v3d, V3D_TFU); ++ if (IS_ERR(fence)) ++ return NULL; + +- schedule_delayed_work(&job->base.work_tdr, +- job->base.sched->timeout); +- return; ++ v3d->tfu_job = job; ++ if (job->done_fence) ++ dma_fence_put(job->done_fence); ++ job->done_fence = dma_fence_get(fence); ++ ++ trace_v3d_submit_tfu(dev, to_v3d_fence(fence)->seqno); ++ ++ V3D_WRITE(V3D_TFU_IIA, job->args.iia); ++ V3D_WRITE(V3D_TFU_IIS, job->args.iis); ++ V3D_WRITE(V3D_TFU_ICA, job->args.ica); ++ V3D_WRITE(V3D_TFU_IUA, job->args.iua); ++ V3D_WRITE(V3D_TFU_IOA, job->args.ioa); ++ V3D_WRITE(V3D_TFU_IOS, job->args.ios); ++ V3D_WRITE(V3D_TFU_COEF0, job->args.coef[0]); ++ if (job->args.coef[0] & V3D_TFU_COEF0_USECOEF) { ++ V3D_WRITE(V3D_TFU_COEF1, job->args.coef[1]); ++ V3D_WRITE(V3D_TFU_COEF2, job->args.coef[2]); ++ V3D_WRITE(V3D_TFU_COEF3, job->args.coef[3]); + } ++ /* ICFG kicks off the job. */ ++ V3D_WRITE(V3D_TFU_ICFG, job->args.icfg | V3D_TFU_ICFG_IOC); ++ ++ return fence; ++} ++ ++static void ++v3d_gpu_reset_for_timeout(struct v3d_dev *v3d, struct drm_sched_job *sched_job) ++{ ++ enum v3d_queue q; + + mutex_lock(&v3d->reset_lock); + +@@ -196,6 +247,41 @@ v3d_job_timedout(struct drm_sched_job *s + mutex_unlock(&v3d->reset_lock); + } + ++static void ++v3d_job_timedout(struct drm_sched_job *sched_job) ++{ ++ struct v3d_job *job = to_v3d_job(sched_job); ++ struct v3d_exec_info *exec = job->exec; ++ struct v3d_dev *v3d = exec->v3d; ++ enum v3d_queue job_q = job == &exec->bin ? V3D_BIN : V3D_RENDER; ++ u32 ctca = V3D_CORE_READ(0, V3D_CLE_CTNCA(job_q)); ++ u32 ctra = V3D_CORE_READ(0, V3D_CLE_CTNRA(job_q)); ++ ++ /* If the current address or return address have changed, then ++ * the GPU has probably made progress and we should delay the ++ * reset. This could fail if the GPU got in an infinite loop ++ * in the CL, but that is pretty unlikely outside of an i-g-t ++ * testcase. ++ */ ++ if (job->timedout_ctca != ctca || job->timedout_ctra != ctra) { ++ job->timedout_ctca = ctca; ++ job->timedout_ctra = ctra; ++ schedule_delayed_work(&job->base.work_tdr, ++ job->base.sched->timeout); ++ return; ++ } ++ ++ v3d_gpu_reset_for_timeout(v3d, sched_job); ++} ++ ++static void ++v3d_tfu_job_timedout(struct drm_sched_job *sched_job) ++{ ++ struct v3d_tfu_job *job = to_tfu_job(sched_job); ++ ++ v3d_gpu_reset_for_timeout(job->v3d, sched_job); ++} ++ + static const struct drm_sched_backend_ops v3d_sched_ops = { + .dependency = v3d_job_dependency, + .run_job = v3d_job_run, +@@ -203,6 +289,13 @@ static const struct drm_sched_backend_op + .free_job = v3d_job_free + }; + ++static const struct drm_sched_backend_ops v3d_tfu_sched_ops = { ++ .dependency = v3d_tfu_job_dependency, ++ .run_job = v3d_tfu_job_run, ++ .timedout_job = v3d_tfu_job_timedout, ++ .free_job = v3d_tfu_job_free ++}; ++ + int + v3d_sched_init(struct v3d_dev *v3d) + { +@@ -232,6 +325,19 @@ v3d_sched_init(struct v3d_dev *v3d) + drm_sched_fini(&v3d->queue[V3D_BIN].sched); + return ret; + } ++ ++ ret = drm_sched_init(&v3d->queue[V3D_TFU].sched, ++ &v3d_tfu_sched_ops, ++ hw_jobs_limit, job_hang_limit, ++ msecs_to_jiffies(hang_limit_ms), ++ "v3d_tfu"); ++ if (ret) { ++ dev_err(v3d->dev, "Failed to create TFU scheduler: %d.", ++ ret); ++ drm_sched_fini(&v3d->queue[V3D_RENDER].sched); ++ drm_sched_fini(&v3d->queue[V3D_BIN].sched); ++ return ret; ++ } + + return 0; + } +--- a/drivers/gpu/drm/v3d/v3d_trace.h ++++ b/drivers/gpu/drm/v3d/v3d_trace.h +@@ -42,6 +42,26 @@ TRACE_EVENT(v3d_submit_cl, + __entry->ctnqea) + ); + ++TRACE_EVENT(v3d_submit_tfu, ++ TP_PROTO(struct drm_device *dev, ++ uint64_t seqno), ++ TP_ARGS(dev, seqno), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ __field(u64, seqno) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ __entry->seqno = seqno; ++ ), ++ ++ TP_printk("dev=%u, seqno=%llu", ++ __entry->dev, ++ __entry->seqno) ++); ++ + TRACE_EVENT(v3d_reset_begin, + TP_PROTO(struct drm_device *dev), + TP_ARGS(dev), +--- a/include/uapi/drm/v3d_drm.h ++++ b/include/uapi/drm/v3d_drm.h +@@ -36,6 +36,7 @@ extern "C" { + #define DRM_V3D_MMAP_BO 0x03 + #define DRM_V3D_GET_PARAM 0x04 + #define DRM_V3D_GET_BO_OFFSET 0x05 ++#define DRM_V3D_SUBMIT_TFU 0x06 + + #define DRM_IOCTL_V3D_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl) + #define DRM_IOCTL_V3D_WAIT_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo) +@@ -43,6 +44,7 @@ extern "C" { + #define DRM_IOCTL_V3D_MMAP_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_MMAP_BO, struct drm_v3d_mmap_bo) + #define DRM_IOCTL_V3D_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_PARAM, struct drm_v3d_get_param) + #define DRM_IOCTL_V3D_GET_BO_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_BO_OFFSET, struct drm_v3d_get_bo_offset) ++#define DRM_IOCTL_V3D_SUBMIT_TFU DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_TFU, struct drm_v3d_submit_tfu) + + /** + * struct drm_v3d_submit_cl - ioctl argument for submitting commands to the 3D +@@ -169,6 +171,7 @@ enum drm_v3d_param { + DRM_V3D_PARAM_V3D_CORE0_IDENT0, + DRM_V3D_PARAM_V3D_CORE0_IDENT1, + DRM_V3D_PARAM_V3D_CORE0_IDENT2, ++ DRM_V3D_PARAM_SUPPORTS_TFU, + }; + + struct drm_v3d_get_param { +@@ -187,6 +190,28 @@ struct drm_v3d_get_bo_offset { + __u32 offset; + }; + ++struct drm_v3d_submit_tfu { ++ __u32 icfg; ++ __u32 iia; ++ __u32 iis; ++ __u32 ica; ++ __u32 iua; ++ __u32 ioa; ++ __u32 ios; ++ __u32 coef[4]; ++ /* First handle is the output BO, following are other inputs. ++ * 0 for unused. ++ */ ++ __u32 bo_handles[4]; ++ /* sync object to block on before running the TFU job. Each TFU ++ * job will execute in the order submitted to its FD. Synchronization ++ * against rendering jobs requires using sync objects. ++ */ ++ __u32 in_sync; ++ /* Sync object to signal when the TFU job is done. */ ++ __u32 out_sync; ++}; ++ + #if defined(__cplusplus) + } + #endif diff --git a/target/linux/brcm2708/patches-4.19/950-0517-drm-v3d-Drop-the-dev-argument-to-lock-unlock-of-BO-r.patch b/target/linux/brcm2708/patches-4.19/950-0517-drm-v3d-Drop-the-dev-argument-to-lock-unlock-of-BO-r.patch new file mode 100644 index 0000000000..e39c19190e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0517-drm-v3d-Drop-the-dev-argument-to-lock-unlock-of-BO-r.patch @@ -0,0 +1,102 @@ +From c95a4208ef87c56349d35480e68304562c7612bd Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 28 Nov 2018 15:09:26 -0800 +Subject: [PATCH] drm/v3d: Drop the "dev" argument to lock/unlock of BO + reservations. + +They were unused, as Dave Emett noticed in TFU review. + +Signed-off-by: Eric Anholt +Cc: Dave Emett +Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-2-eric@anholt.net +Reviewed-by: Daniel Vetter +(cherry picked from commit e14a07fc4b961a75f6c275d6bd670ba54fbdae14) +--- + drivers/gpu/drm/v3d/v3d_gem.c | 20 +++++++++----------- + 1 file changed, 9 insertions(+), 11 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -219,8 +219,7 @@ v3d_attach_object_fences(struct v3d_bo * + } + + static void +-v3d_unlock_bo_reservations(struct drm_device *dev, +- struct v3d_bo **bos, ++v3d_unlock_bo_reservations(struct v3d_bo **bos, + int bo_count, + struct ww_acquire_ctx *acquire_ctx) + { +@@ -240,8 +239,7 @@ v3d_unlock_bo_reservations(struct drm_de + * to v3d, so we don't attach dma-buf fences to them. + */ + static int +-v3d_lock_bo_reservations(struct drm_device *dev, +- struct v3d_bo **bos, ++v3d_lock_bo_reservations(struct v3d_bo **bos, + int bo_count, + struct ww_acquire_ctx *acquire_ctx) + { +@@ -298,7 +296,7 @@ retry: + for (i = 0; i < bo_count; i++) { + ret = reservation_object_reserve_shared(bos[i]->resv); + if (ret) { +- v3d_unlock_bo_reservations(dev, bos, bo_count, ++ v3d_unlock_bo_reservations(bos, bo_count, + acquire_ctx); + return ret; + } +@@ -566,7 +564,7 @@ v3d_submit_cl_ioctl(struct drm_device *d + if (ret) + goto fail; + +- ret = v3d_lock_bo_reservations(dev, exec->bo, exec->bo_count, ++ ret = v3d_lock_bo_reservations(exec->bo, exec->bo_count, + &acquire_ctx); + if (ret) + goto fail; +@@ -604,7 +602,7 @@ v3d_submit_cl_ioctl(struct drm_device *d + v3d_attach_object_fences(exec->bo, exec->bo_count, + exec->render_done_fence); + +- v3d_unlock_bo_reservations(dev, exec->bo, exec->bo_count, &acquire_ctx); ++ v3d_unlock_bo_reservations(exec->bo, exec->bo_count, &acquire_ctx); + + /* Update the return sync object for the */ + sync_out = drm_syncobj_find(file_priv, args->out_sync); +@@ -620,7 +618,7 @@ v3d_submit_cl_ioctl(struct drm_device *d + + fail_unreserve: + mutex_unlock(&v3d->sched_lock); +- v3d_unlock_bo_reservations(dev, exec->bo, exec->bo_count, &acquire_ctx); ++ v3d_unlock_bo_reservations(exec->bo, exec->bo_count, &acquire_ctx); + fail: + v3d_exec_put(exec); + +@@ -691,7 +689,7 @@ v3d_submit_tfu_ioctl(struct drm_device * + } + spin_unlock(&file_priv->table_lock); + +- ret = v3d_lock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); ++ ret = v3d_lock_bo_reservations(job->bo, bo_count, &acquire_ctx); + if (ret) + goto fail; + +@@ -710,7 +708,7 @@ v3d_submit_tfu_ioctl(struct drm_device * + + v3d_attach_object_fences(job->bo, bo_count, sched_done_fence); + +- v3d_unlock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); ++ v3d_unlock_bo_reservations(job->bo, bo_count, &acquire_ctx); + + /* Update the return sync object */ + sync_out = drm_syncobj_find(file_priv, args->out_sync); +@@ -726,7 +724,7 @@ v3d_submit_tfu_ioctl(struct drm_device * + + fail_unreserve: + mutex_unlock(&v3d->sched_lock); +- v3d_unlock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); ++ v3d_unlock_bo_reservations(job->bo, bo_count, &acquire_ctx); + fail: + v3d_tfu_job_put(job); + diff --git a/target/linux/brcm2708/patches-4.19/950-0517-i2c-bcm2835-Model-Divider-in-CCF.patch b/target/linux/brcm2708/patches-4.19/950-0517-i2c-bcm2835-Model-Divider-in-CCF.patch deleted file mode 100644 index f584989598..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0517-i2c-bcm2835-Model-Divider-in-CCF.patch +++ /dev/null @@ -1,270 +0,0 @@ -From ffbb6cc14b8fb1876b249048284a5fe30f48c693 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Sat, 8 Jun 2019 10:14:43 -0700 -Subject: [PATCH 517/806] i2c: bcm2835: Model Divider in CCF - -Commit bebff81fb8b9216eb4fba22cf910553621ae3477 upstream. - -Model the I2C bus clock divider as a part of the Core Clock Framework. -Primarily this removes the clk_get_rate() call from each transfer. -This call causes problems for slave drivers that themselves have -internal clock components that are controlled by an I2C interface. -When the slave's internal clock component is prepared, the prepare -lock is obtained, and it makes calls to the I2C subsystem to -command the hardware to activate the clock. In order to perform -the I2C transfer, this driver sets the divider, which requires -it to get the parent clock rate, which it does with clk_get_rate(). -Unfortunately, this function will try to take the clock prepare -lock, which is already held by the slave's internal clock calls -creating a deadlock. - -Modeling the divider in the CCF natively removes this dependency -and the divider value is only set upon changing the bus clock -frequency or changes in the parent clock that cascade down to this -divisor. This obviates the need to set the divider with every -transfer and avoids the deadlock described above. It also should -provide better clock debugging and save a few cycles on each -transfer due to not having to recalcuate the divider value. - -Signed-off-by: Annaliese McDermond -Acked-by: Stefan Wahren -Reviewed-by: Eric Anholt -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-bcm2835.c | 145 ++++++++++++++++++++++++------- - 1 file changed, 114 insertions(+), 31 deletions(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -12,6 +12,8 @@ - */ - - #include -+#include -+#include - #include - #include - #include -@@ -71,9 +73,7 @@ struct bcm2835_debug { - struct bcm2835_i2c_dev { - struct device *dev; - void __iomem *regs; -- struct clk *clk; - int irq; -- u32 bus_clk_rate; - struct i2c_adapter adapter; - struct completion completion; - struct i2c_msg *curr_msg; -@@ -164,12 +164,17 @@ static inline u32 bcm2835_i2c_readl(stru - return readl(i2c_dev->regs + reg); - } - --static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev) -+#define to_clk_bcm2835_i2c(_hw) container_of(_hw, struct clk_bcm2835_i2c, hw) -+struct clk_bcm2835_i2c { -+ struct clk_hw hw; -+ struct bcm2835_i2c_dev *i2c_dev; -+}; -+ -+static int clk_bcm2835_i2c_calc_divider(unsigned long rate, -+ unsigned long parent_rate) - { -- u32 divider, redl, fedl; -+ u32 divider = DIV_ROUND_UP(parent_rate, rate); - -- divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), -- i2c_dev->bus_clk_rate); - /* - * Per the datasheet, the register is always interpreted as an even - * number, by rounding down. In other words, the LSB is ignored. So, -@@ -178,12 +183,23 @@ static int bcm2835_i2c_set_divider(struc - if (divider & 1) - divider++; - if ((divider < BCM2835_I2C_CDIV_MIN) || -- (divider > BCM2835_I2C_CDIV_MAX)) { -- dev_err_ratelimited(i2c_dev->dev, "Invalid clock-frequency\n"); -+ (divider > BCM2835_I2C_CDIV_MAX)) - return -EINVAL; -- } - -- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); -+ return divider; -+} -+ -+static int clk_bcm2835_i2c_set_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct clk_bcm2835_i2c *div = to_clk_bcm2835_i2c(hw); -+ u32 redl, fedl; -+ u32 divider = clk_bcm2835_i2c_calc_divider(rate, parent_rate); -+ -+ if (divider == -EINVAL) -+ return -EINVAL; -+ -+ bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_DIV, divider); - - /* - * Number of core clocks to wait after falling edge before -@@ -198,12 +214,62 @@ static int bcm2835_i2c_set_divider(struc - */ - redl = max(divider / 4, 1u); - -- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DEL, -+ bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_DEL, - (fedl << BCM2835_I2C_FEDL_SHIFT) | - (redl << BCM2835_I2C_REDL_SHIFT)); - return 0; - } - -+static long clk_bcm2835_i2c_round_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ u32 divider = clk_bcm2835_i2c_calc_divider(rate, *parent_rate); -+ -+ return DIV_ROUND_UP(*parent_rate, divider); -+} -+ -+static unsigned long clk_bcm2835_i2c_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct clk_bcm2835_i2c *div = to_clk_bcm2835_i2c(hw); -+ u32 divider = bcm2835_i2c_readl(div->i2c_dev, BCM2835_I2C_DIV); -+ -+ return DIV_ROUND_UP(parent_rate, divider); -+} -+ -+static const struct clk_ops clk_bcm2835_i2c_ops = { -+ .set_rate = clk_bcm2835_i2c_set_rate, -+ .round_rate = clk_bcm2835_i2c_round_rate, -+ .recalc_rate = clk_bcm2835_i2c_recalc_rate, -+}; -+ -+static struct clk *bcm2835_i2c_register_div(struct device *dev, -+ const char *mclk_name, -+ struct bcm2835_i2c_dev *i2c_dev) -+{ -+ struct clk_init_data init; -+ struct clk_bcm2835_i2c *priv; -+ char name[32]; -+ -+ snprintf(name, sizeof(name), "%s_div", dev_name(dev)); -+ -+ init.ops = &clk_bcm2835_i2c_ops; -+ init.name = name; -+ init.parent_names = (const char* []) { mclk_name }; -+ init.num_parents = 1; -+ init.flags = 0; -+ -+ priv = devm_kzalloc(dev, sizeof(struct clk_bcm2835_i2c), GFP_KERNEL); -+ if (priv == NULL) -+ return ERR_PTR(-ENOMEM); -+ -+ priv->hw.init = &init; -+ priv->i2c_dev = i2c_dev; -+ -+ clk_hw_register_clkdev(&priv->hw, "div", dev_name(dev)); -+ return devm_clk_register(dev, &priv->hw); -+} -+ - static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev) - { - u32 val; -@@ -363,7 +429,7 @@ static int bcm2835_i2c_xfer(struct i2c_a - { - struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); - unsigned long time_left; -- int i, ret; -+ int i; - - if (debug) - i2c_dev->debug_num_msgs = num; -@@ -379,10 +445,6 @@ static int bcm2835_i2c_xfer(struct i2c_a - return -EOPNOTSUPP; - } - -- ret = bcm2835_i2c_set_divider(i2c_dev); -- if (ret) -- return ret; -- - i2c_dev->curr_msg = msgs; - i2c_dev->num_msgs = num; - reinit_completion(&i2c_dev->completion); -@@ -443,6 +505,9 @@ static int bcm2835_i2c_probe(struct plat - struct resource *mem, *irq; - int ret; - struct i2c_adapter *adap; -+ const char *mclk_name; -+ struct clk *bus_clk; -+ u32 bus_clk_rate; - - i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); - if (!i2c_dev) -@@ -456,21 +521,6 @@ static int bcm2835_i2c_probe(struct plat - if (IS_ERR(i2c_dev->regs)) - return PTR_ERR(i2c_dev->regs); - -- i2c_dev->clk = devm_clk_get(&pdev->dev, NULL); -- if (IS_ERR(i2c_dev->clk)) { -- if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER) -- dev_err(&pdev->dev, "Could not get clock\n"); -- return PTR_ERR(i2c_dev->clk); -- } -- -- ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", -- &i2c_dev->bus_clk_rate); -- if (ret < 0) { -- dev_warn(&pdev->dev, -- "Could not read clock-frequency property\n"); -- i2c_dev->bus_clk_rate = 100000; -- } -- - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq) { - dev_err(&pdev->dev, "No IRQ resource\n"); -@@ -485,6 +535,35 @@ static int bcm2835_i2c_probe(struct plat - return -ENODEV; - } - -+ mclk_name = of_clk_get_parent_name(pdev->dev.of_node, 0); -+ -+ bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk_name, i2c_dev); -+ -+ if (IS_ERR(bus_clk)) { -+ dev_err(&pdev->dev, "Could not register clock\n"); -+ return PTR_ERR(bus_clk); -+ } -+ -+ ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", -+ &bus_clk_rate); -+ if (ret < 0) { -+ dev_warn(&pdev->dev, -+ "Could not read clock-frequency property\n"); -+ bus_clk_rate = 100000; -+ } -+ -+ ret = clk_set_rate_exclusive(bus_clk, bus_clk_rate); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "Could not set clock frequency\n"); -+ return ret; -+ } -+ -+ ret = clk_prepare_enable(bus_clk); -+ if (ret) { -+ dev_err(&pdev->dev, "Couldn't prepare clock"); -+ return ret; -+ } -+ - adap = &i2c_dev->adapter; - i2c_set_adapdata(adap, i2c_dev); - adap->owner = THIS_MODULE; -@@ -507,6 +586,10 @@ static int bcm2835_i2c_probe(struct plat - static int bcm2835_i2c_remove(struct platform_device *pdev) - { - struct bcm2835_i2c_dev *i2c_dev = platform_get_drvdata(pdev); -+ struct clk *bus_clk = devm_clk_get(i2c_dev->dev, "div"); -+ -+ clk_rate_exclusive_put(bus_clk); -+ clk_disable_unprepare(bus_clk); - - free_irq(i2c_dev->irq, i2c_dev); - i2c_del_adapter(&i2c_dev->adapter); diff --git a/target/linux/brcm2708/patches-4.19/950-0518-drm-v3d-Add-missing-fence-timeline-name-for-TFU.patch b/target/linux/brcm2708/patches-4.19/950-0518-drm-v3d-Add-missing-fence-timeline-name-for-TFU.patch new file mode 100644 index 0000000000..d56e04547f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0518-drm-v3d-Add-missing-fence-timeline-name-for-TFU.patch @@ -0,0 +1,37 @@ +From 49281ec9b6f3c7bda94c798133dd35d50eb69649 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 30 Nov 2018 16:57:59 -0800 +Subject: [PATCH] drm/v3d: Add missing fence timeline name for TFU. + +We shouldn't be returning v3d-render for our new queue. + +Signed-off-by: Eric Anholt +Fixes: 83d5139982db ("drm/v3d: Add support for submitting jobs to the TFU.") +Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-6-eric@anholt.net +Reviewed-by: Dave Emett +(cherry picked from commit db176f6ba1da39ad0016c77b9775a6bb3d0ce88a) +--- + drivers/gpu/drm/v3d/v3d_fence.c | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_fence.c ++++ b/drivers/gpu/drm/v3d/v3d_fence.c +@@ -29,10 +29,16 @@ static const char *v3d_fence_get_timelin + { + struct v3d_fence *f = to_v3d_fence(fence); + +- if (f->queue == V3D_BIN) ++ switch (f->queue) { ++ case V3D_BIN: + return "v3d-bin"; +- else ++ case V3D_RENDER: + return "v3d-render"; ++ case V3D_TFU: ++ return "v3d-tfu"; ++ default: ++ return NULL; ++ } + } + + const struct dma_fence_ops v3d_fence_ops = { diff --git a/target/linux/brcm2708/patches-4.19/950-0518-staging-vc04_services-Use-correct-cache-line-size.patch b/target/linux/brcm2708/patches-4.19/950-0518-staging-vc04_services-Use-correct-cache-line-size.patch deleted file mode 100644 index e9b4825bb3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0518-staging-vc04_services-Use-correct-cache-line-size.patch +++ /dev/null @@ -1,135 +0,0 @@ -From 63079fbe20c954140f8eb61f858b0774890f301c Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 17 Sep 2018 09:22:21 +0100 -Subject: [PATCH 518/806] staging/vc04_services: Use correct cache line size - -Use the compatible string in the DTB to select the correct cache line -size for the SoC - 32 for BCM2835, and 64 for BCM2836 and BCM2837. - -Signed-off-by: Phil Elwell -Tested-by: Stefan Wahren -Signed-off-by: Greg Kroah-Hartman ---- - .../interface/vchiq_arm/vchiq_2835_arm.c | 15 ++------ - .../interface/vchiq_arm/vchiq_arm.c | 35 +++++++++++++------ - .../interface/vchiq_arm/vchiq_arm.h | 5 +++ - 3 files changed, 33 insertions(+), 22 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -@@ -117,7 +117,8 @@ free_pagelist(struct vchiq_pagelist_info - int vchiq_platform_init(struct platform_device *pdev, VCHIQ_STATE_T *state) - { - struct device *dev = &pdev->dev; -- struct rpi_firmware *fw = platform_get_drvdata(pdev); -+ struct vchiq_drvdata *drvdata = platform_get_drvdata(pdev); -+ struct rpi_firmware *fw = drvdata->fw; - VCHIQ_SLOT_ZERO_T *vchiq_slot_zero; - struct resource *res; - void *slot_mem; -@@ -135,17 +136,7 @@ int vchiq_platform_init(struct platform_ - if (err < 0) - return err; - -- /* -- * The tempting L1_CACHE_BYTES macro doesn't work in the case of -- * a kernel built with bcm2835_defconfig running on a BCM2836/7 -- * processor, hence the need for a runtime check. The dcache line size -- * is encoded in one of the coprocessor registers, but there is no -- * convenient way to access it short of embedded assembler, hence -- * the use of read_cpuid_id(). The following test evaluates to true -- * on a BCM2835 showing that it is ARMv6-ish, whereas -- * cpu_architecture() will indicate that it is an ARMv7. -- */ -- g_cache_line_size = ((read_cpuid_id() & 0x7f000) == 0x7b000) ? 32 : 64; -+ g_cache_line_size = drvdata->cache_line_size; - g_fragments_size = 2 * g_cache_line_size; - - /* Allocate space for the channels in coherent memory */ ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -173,6 +173,14 @@ static struct platform_device *bcm2835_c - static struct platform_device *bcm2835_codec; - static struct platform_device *vcsm_cma; - -+static struct vchiq_drvdata bcm2835_drvdata = { -+ .cache_line_size = 32, -+}; -+ -+static struct vchiq_drvdata bcm2836_drvdata = { -+ .cache_line_size = 64, -+}; -+ - static const char *const ioctl_names[] = { - "CONNECT", - "SHUTDOWN", -@@ -3607,12 +3615,25 @@ vchiq_register_child(struct platform_dev - return new_dev; - } - -+static const struct of_device_id vchiq_of_match[] = { -+ { .compatible = "brcm,bcm2835-vchiq", .data = &bcm2835_drvdata }, -+ { .compatible = "brcm,bcm2836-vchiq", .data = &bcm2836_drvdata }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, vchiq_of_match); -+ - static int vchiq_probe(struct platform_device *pdev) - { - struct device_node *fw_node; -- struct rpi_firmware *fw; -+ const struct of_device_id *of_id; -+ struct vchiq_drvdata *drvdata; - int err; - -+ of_id = of_match_node(vchiq_of_match, pdev->dev.of_node); -+ drvdata = (struct vchiq_drvdata *)of_id->data; -+ if (!drvdata) -+ return -EINVAL; -+ - fw_node = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); - if (!fw_node) { -@@ -3620,12 +3641,12 @@ static int vchiq_probe(struct platform_d - return -ENOENT; - } - -- fw = rpi_firmware_get(fw_node); -+ drvdata->fw = rpi_firmware_get(fw_node); - of_node_put(fw_node); -- if (!fw) -+ if (!drvdata->fw) - return -EPROBE_DEFER; - -- platform_set_drvdata(pdev, fw); -+ platform_set_drvdata(pdev, drvdata); - - err = vchiq_platform_init(pdev, &g_state); - if (err != 0) -@@ -3703,12 +3724,6 @@ static int vchiq_remove(struct platform_ - return 0; - } - --static const struct of_device_id vchiq_of_match[] = { -- { .compatible = "brcm,bcm2835-vchiq", }, -- {}, --}; --MODULE_DEVICE_TABLE(of, vchiq_of_match); -- - static struct platform_driver vchiq_driver = { - .driver = { - .name = "bcm2835_vchiq", ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h -@@ -123,6 +123,11 @@ typedef struct vchiq_arm_state_struct { - - } VCHIQ_ARM_STATE_T; - -+struct vchiq_drvdata { -+ const unsigned int cache_line_size; -+ struct rpi_firmware *fw; -+}; -+ - extern int vchiq_arm_log_level; - extern int vchiq_susp_log_level; - diff --git a/target/linux/brcm2708/patches-4.19/950-0519-drm-v3d-Add-more-tracepoints-for-V3D-GPU-rendering.patch b/target/linux/brcm2708/patches-4.19/950-0519-drm-v3d-Add-more-tracepoints-for-V3D-GPU-rendering.patch new file mode 100644 index 0000000000..0b54645107 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0519-drm-v3d-Add-more-tracepoints-for-V3D-GPU-rendering.patch @@ -0,0 +1,205 @@ +From 128adbc39c9826ca137ca3627cff17644e786fdb Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 30 Nov 2018 16:57:58 -0800 +Subject: [PATCH] drm/v3d: Add more tracepoints for V3D GPU rendering. + +The core scheduler tells us when the job is pushed to the scheduler's +queue, and I had the job_run functions saying when they actually queue +the job to the hardware. By adding tracepoints for the very top of +the ioctls and the IRQs signaling job completion, "perf record -a -e +v3d:.\* -e gpu_scheduler:.\* ; perf script" gets you a pretty +decent timeline. + +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-5-eric@anholt.net +Reviewed-by: Dave Emett +(cherry picked from commit 55a9b74846ed5e6219c7d81a8e1bf96f25d8ad5e) +--- + drivers/gpu/drm/v3d/v3d_gem.c | 4 ++ + drivers/gpu/drm/v3d/v3d_irq.c | 19 +++++- + drivers/gpu/drm/v3d/v3d_trace.h | 101 ++++++++++++++++++++++++++++++++ + 3 files changed, 121 insertions(+), 3 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -521,6 +521,8 @@ v3d_submit_cl_ioctl(struct drm_device *d + struct drm_syncobj *sync_out; + int ret = 0; + ++ trace_v3d_submit_cl_ioctl(&v3d->drm, args->rcl_start, args->rcl_end); ++ + if (args->pad != 0) { + DRM_INFO("pad must be zero: %d\n", args->pad); + return -EINVAL; +@@ -648,6 +650,8 @@ v3d_submit_tfu_ioctl(struct drm_device * + int ret = 0; + int bo_count; + ++ trace_v3d_submit_tfu_ioctl(&v3d->drm, args->iia); ++ + job = kcalloc(1, sizeof(*job), GFP_KERNEL); + if (!job) + return -ENOMEM; +--- a/drivers/gpu/drm/v3d/v3d_irq.c ++++ b/drivers/gpu/drm/v3d/v3d_irq.c +@@ -15,6 +15,7 @@ + + #include "v3d_drv.h" + #include "v3d_regs.h" ++#include "v3d_trace.h" + + #define V3D_CORE_IRQS ((u32)(V3D_INT_OUTOMEM | \ + V3D_INT_FLDONE | \ +@@ -88,12 +89,20 @@ v3d_irq(int irq, void *arg) + } + + if (intsts & V3D_INT_FLDONE) { +- dma_fence_signal(v3d->bin_job->bin.done_fence); ++ struct v3d_fence *fence = ++ to_v3d_fence(v3d->bin_job->bin.done_fence); ++ ++ trace_v3d_bcl_irq(&v3d->drm, fence->seqno); ++ dma_fence_signal(&fence->base); + status = IRQ_HANDLED; + } + + if (intsts & V3D_INT_FRDONE) { +- dma_fence_signal(v3d->render_job->render.done_fence); ++ struct v3d_fence *fence = ++ to_v3d_fence(v3d->render_job->render.done_fence); ++ ++ trace_v3d_rcl_irq(&v3d->drm, fence->seqno); ++ dma_fence_signal(&fence->base); + status = IRQ_HANDLED; + } + +@@ -119,7 +128,11 @@ v3d_hub_irq(int irq, void *arg) + V3D_WRITE(V3D_HUB_INT_CLR, intsts); + + if (intsts & V3D_HUB_INT_TFUC) { +- dma_fence_signal(v3d->tfu_job->done_fence); ++ struct v3d_fence *fence = ++ to_v3d_fence(v3d->tfu_job->done_fence); ++ ++ trace_v3d_tfu_irq(&v3d->drm, fence->seqno); ++ dma_fence_signal(&fence->base); + status = IRQ_HANDLED; + } + +--- a/drivers/gpu/drm/v3d/v3d_trace.h ++++ b/drivers/gpu/drm/v3d/v3d_trace.h +@@ -12,6 +12,28 @@ + #define TRACE_SYSTEM v3d + #define TRACE_INCLUDE_FILE v3d_trace + ++TRACE_EVENT(v3d_submit_cl_ioctl, ++ TP_PROTO(struct drm_device *dev, u32 ct1qba, u32 ct1qea), ++ TP_ARGS(dev, ct1qba, ct1qea), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ __field(u32, ct1qba) ++ __field(u32, ct1qea) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ __entry->ct1qba = ct1qba; ++ __entry->ct1qea = ct1qea; ++ ), ++ ++ TP_printk("dev=%u, RCL 0x%08x..0x%08x", ++ __entry->dev, ++ __entry->ct1qba, ++ __entry->ct1qea) ++); ++ + TRACE_EVENT(v3d_submit_cl, + TP_PROTO(struct drm_device *dev, bool is_render, + uint64_t seqno, +@@ -42,6 +64,85 @@ TRACE_EVENT(v3d_submit_cl, + __entry->ctnqea) + ); + ++TRACE_EVENT(v3d_bcl_irq, ++ TP_PROTO(struct drm_device *dev, ++ uint64_t seqno), ++ TP_ARGS(dev, seqno), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ __field(u64, seqno) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ __entry->seqno = seqno; ++ ), ++ ++ TP_printk("dev=%u, seqno=%llu", ++ __entry->dev, ++ __entry->seqno) ++); ++ ++TRACE_EVENT(v3d_rcl_irq, ++ TP_PROTO(struct drm_device *dev, ++ uint64_t seqno), ++ TP_ARGS(dev, seqno), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ __field(u64, seqno) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ __entry->seqno = seqno; ++ ), ++ ++ TP_printk("dev=%u, seqno=%llu", ++ __entry->dev, ++ __entry->seqno) ++); ++ ++TRACE_EVENT(v3d_tfu_irq, ++ TP_PROTO(struct drm_device *dev, ++ uint64_t seqno), ++ TP_ARGS(dev, seqno), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ __field(u64, seqno) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ __entry->seqno = seqno; ++ ), ++ ++ TP_printk("dev=%u, seqno=%llu", ++ __entry->dev, ++ __entry->seqno) ++); ++ ++TRACE_EVENT(v3d_submit_tfu_ioctl, ++ TP_PROTO(struct drm_device *dev, u32 iia), ++ TP_ARGS(dev, iia), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ __field(u32, iia) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ __entry->iia = iia; ++ ), ++ ++ TP_printk("dev=%u, IIA 0x%08x", ++ __entry->dev, ++ __entry->iia) ++); ++ + TRACE_EVENT(v3d_submit_tfu, + TP_PROTO(struct drm_device *dev, + uint64_t seqno), diff --git a/target/linux/brcm2708/patches-4.19/950-0519-tty-amba-pl011-allow-shared-interrupt.patch b/target/linux/brcm2708/patches-4.19/950-0519-tty-amba-pl011-allow-shared-interrupt.patch deleted file mode 100644 index 7d79ed0f05..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0519-tty-amba-pl011-allow-shared-interrupt.patch +++ /dev/null @@ -1,28 +0,0 @@ -From ea75a716955e85ad076dd2861ca9e41def406a1b Mon Sep 17 00:00:00 2001 -From: Doug Berger -Date: Mon, 13 May 2019 20:59:45 +0200 -Subject: [PATCH 519/806] tty: amba-pl011: allow shared interrupt - -The PL011 register space includes all necessary status bits to -determine whether a device instance requires handling in response -to an interrupt. Therefore, multiple instances of the device could -be serviced by a single shared interrupt, which is the case on BCM7211. - -Signed-off-by: Doug Berger -Signed-off-by: Florian Fainelli ---- - drivers/tty/serial/amba-pl011.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/tty/serial/amba-pl011.c -+++ b/drivers/tty/serial/amba-pl011.c -@@ -1733,7 +1733,8 @@ static int pl011_allocate_irq(struct uar - { - pl011_write(uap->im, uap, REG_IMSC); - -- return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); -+ return request_irq(uap->port.irq, pl011_int, IRQF_SHARED, "uart-pl011", -+ uap); - } - - /* diff --git a/target/linux/brcm2708/patches-4.19/950-0520-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch b/target/linux/brcm2708/patches-4.19/950-0520-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch deleted file mode 100644 index ce9409e36a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0520-ARM-bcm283x-Reduce-register-ranges-for-UART-SPI-and-.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 3f6fe9da303fc01fb754a0a639ec3cdb813e8780 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sun, 19 May 2019 12:20:00 +0200 -Subject: [PATCH 520/806] ARM: bcm283x: Reduce register ranges for UART, SPI - and I2C - -The assigned register ranges for UART, SPI and I2C were too wasteful. -In order to avoid overlapping with the new functions on BCM2838 -reduce the ranges. - -Signed-off-by: Stefan Wahren ---- - arch/arm/boot/dts/bcm283x.dtsi | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -387,7 +387,7 @@ - - uart0: serial@7e201000 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; -- reg = <0x7e201000 0x1000>; -+ reg = <0x7e201000 0x200>; - interrupts = <2 25>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; -@@ -418,7 +418,7 @@ - - spi: spi@7e204000 { - compatible = "brcm,bcm2835-spi"; -- reg = <0x7e204000 0x1000>; -+ reg = <0x7e204000 0x200>; - interrupts = <2 22>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; -@@ -428,7 +428,7 @@ - - i2c0: i2c@7e205000 { - compatible = "brcm,bcm2835-i2c"; -- reg = <0x7e205000 0x1000>; -+ reg = <0x7e205000 0x200>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; diff --git a/target/linux/brcm2708/patches-4.19/950-0520-drm-v3d-Drop-unused-v3d_flush_caches.patch b/target/linux/brcm2708/patches-4.19/950-0520-drm-v3d-Drop-unused-v3d_flush_caches.patch new file mode 100644 index 0000000000..aba98eb97f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0520-drm-v3d-Drop-unused-v3d_flush_caches.patch @@ -0,0 +1,64 @@ +From 065c8947cb7c40bfb3e76dcbb9d901b5e8fe0ea4 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 3 Dec 2018 14:24:34 -0800 +Subject: [PATCH] drm/v3d: Drop unused v3d_flush_caches(). + +Now that I've specified how the end-of-pipeline flushing should work, +we're never going to use this function. + +Signed-off-by: Eric Anholt +Reviewed-by: Dave Emett +Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-2-eric@anholt.net +(cherry picked from commit 2aa34fd5c7754824cf5488b61ac644f30d3c5c85) +--- + drivers/gpu/drm/v3d/v3d_drv.h | 1 - + drivers/gpu/drm/v3d/v3d_gem.c | 21 --------------------- + 2 files changed, 22 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -308,7 +308,6 @@ void v3d_exec_put(struct v3d_exec_info * + void v3d_tfu_job_put(struct v3d_tfu_job *exec); + void v3d_reset(struct v3d_dev *v3d); + void v3d_invalidate_caches(struct v3d_dev *v3d); +-void v3d_flush_caches(struct v3d_dev *v3d); + + /* v3d_irq.c */ + int v3d_irq_init(struct v3d_dev *v3d); +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -175,20 +175,6 @@ v3d_invalidate_slices(struct v3d_dev *v3 + V3D_SET_FIELD(0xf, V3D_SLCACTL_ICC)); + } + +-/* Invalidates texture L2 cachelines */ +-static void +-v3d_invalidate_l2t(struct v3d_dev *v3d, int core) +-{ +- V3D_CORE_WRITE(core, +- V3D_CTL_L2TCACTL, +- V3D_L2TCACTL_L2TFLS | +- V3D_SET_FIELD(V3D_L2TCACTL_FLM_CLEAR, V3D_L2TCACTL_FLM)); +- if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & +- V3D_L2TCACTL_L2TFLS), 100)) { +- DRM_ERROR("Timeout waiting for L2T invalidate\n"); +- } +-} +- + void + v3d_invalidate_caches(struct v3d_dev *v3d) + { +@@ -199,13 +185,6 @@ v3d_invalidate_caches(struct v3d_dev *v3 + v3d_flush_l2t(v3d, 0); + } + +-void +-v3d_flush_caches(struct v3d_dev *v3d) +-{ +- v3d_invalidate_l1td(v3d, 0); +- v3d_invalidate_l2t(v3d, 0); +-} +- + static void + v3d_attach_object_fences(struct v3d_bo **bos, int bo_count, + struct dma_fence *fence) diff --git a/target/linux/brcm2708/patches-4.19/950-0521-ARM-bcm283x-Extend-the-WDT-DT-node-out-to-cover-the-.patch b/target/linux/brcm2708/patches-4.19/950-0521-ARM-bcm283x-Extend-the-WDT-DT-node-out-to-cover-the-.patch deleted file mode 100644 index ac3adb9492..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0521-ARM-bcm283x-Extend-the-WDT-DT-node-out-to-cover-the-.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 9f889edf282d1d9a21c921e6cd33cebe22bcc4d4 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 12 Dec 2018 15:51:49 -0800 -Subject: [PATCH 521/806] ARM: bcm283x: Extend the WDT DT node out to cover the - whole PM block. (v4) - -It was covering part of the PM block's range, up to the WDT regs. To -support the rest of the PM block's functionality, we need the full -register range plus the AXI Async Bridge regs for PM sequencing. - -This doesn't convert any of the consumers over to the new binding yet, -since we will need to be careful in coordinating our usage of firmware -services that might power domains on and off versus the bcm2835-pm -driver's access of those same domains. - -Signed-off-by: Eric Anholt -Acked-by: Stefan Wahren -Signed-off-by: Stefan Wahren -(cherry picked from commit 29abc92c1d93e28a8f4d55e6343eec4faf44025a) ---- - arch/arm/boot/dts/bcm283x.dtsi | 13 +++++++++++-- - 1 file changed, 11 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -121,8 +121,17 @@ - }; - - watchdog@7e100000 { -- compatible = "brcm,bcm2835-pm-wdt"; -- reg = <0x7e100000 0x28>; -+ compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; -+ #power-domain-cells = <1>; -+ #reset-cells = <1>; -+ reg = <0x7e100000 0x114>, -+ <0x7e00a000 0x24>; -+ clocks = <&clocks BCM2835_CLOCK_V3D>, -+ <&clocks BCM2835_CLOCK_PERI_IMAGE>, -+ <&clocks BCM2835_CLOCK_H264>, -+ <&clocks BCM2835_CLOCK_ISP>; -+ clock-names = "v3d", "peri_image", "h264", "isp"; -+ system-power-controller; - }; - - clocks: cprman@7e101000 { diff --git a/target/linux/brcm2708/patches-4.19/950-0521-drm-v3d-Don-t-bother-flushing-L1TD-at-job-start.patch b/target/linux/brcm2708/patches-4.19/950-0521-drm-v3d-Don-t-bother-flushing-L1TD-at-job-start.patch new file mode 100644 index 0000000000..164e29f673 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0521-drm-v3d-Don-t-bother-flushing-L1TD-at-job-start.patch @@ -0,0 +1,43 @@ +From 4a6410a53059d6505680b70fc438b7cfbf8939ca Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 3 Dec 2018 14:24:35 -0800 +Subject: [PATCH] drm/v3d: Don't bother flushing L1TD at job start. + +This is the write combiner for TMU writes. You're supposed to flush +that at job end if you had dirtied any cachelines. Flushing it at job +start then doesn't make any sense. + +Signed-off-by: Eric Anholt +Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") +Reviewed-by: Dave Emett +Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-3-eric@anholt.net +(cherry picked from commit 2e6dc3bd80478212e84addf1cafd6ec60674b884) +--- + drivers/gpu/drm/v3d/v3d_gem.c | 12 ------------ + 1 file changed, 12 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -139,22 +139,10 @@ v3d_invalidate_l2(struct v3d_dev *v3d, i + V3D_L2CACTL_L2CENA); + } + +-static void +-v3d_invalidate_l1td(struct v3d_dev *v3d, int core) +-{ +- V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, V3D_L2TCACTL_TMUWCF); +- if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & +- V3D_L2TCACTL_L2TFLS), 100)) { +- DRM_ERROR("Timeout waiting for L1T write combiner flush\n"); +- } +-} +- + /* Invalidates texture L2 cachelines */ + static void + v3d_flush_l2t(struct v3d_dev *v3d, int core) + { +- v3d_invalidate_l1td(v3d, core); +- + V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, + V3D_L2TCACTL_L2TFLS | + V3D_SET_FIELD(V3D_L2TCACTL_FLM_FLUSH, V3D_L2TCACTL_FLM)); diff --git a/target/linux/brcm2708/patches-4.19/950-0522-ARM-dts-Add-label-to-bcm2835-RNG.patch b/target/linux/brcm2708/patches-4.19/950-0522-ARM-dts-Add-label-to-bcm2835-RNG.patch deleted file mode 100644 index b9d29b7454..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0522-ARM-dts-Add-label-to-bcm2835-RNG.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 1297aac31942e596e6888d772ba49393a9f59417 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 4 May 2019 17:06:54 +0200 -Subject: [PATCH 522/806] ARM: dts: Add label to bcm2835 RNG - ---- - arch/arm/boot/dts/bcm283x.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -148,7 +148,7 @@ - <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; - }; - -- rng@7e104000 { -+ rng: rng@7e104000 { - compatible = "brcm,bcm2835-rng"; - reg = <0x7e104000 0x10>; - interrupts = <2 29>; diff --git a/target/linux/brcm2708/patches-4.19/950-0522-drm-v3d-Drop-the-wait-for-L2T-flush-to-complete.patch b/target/linux/brcm2708/patches-4.19/950-0522-drm-v3d-Drop-the-wait-for-L2T-flush-to-complete.patch new file mode 100644 index 0000000000..5a72f9c71f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0522-drm-v3d-Drop-the-wait-for-L2T-flush-to-complete.patch @@ -0,0 +1,41 @@ +From 9d8fa62500ae52348d36766e70b49c7508addaf3 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 3 Dec 2018 14:24:36 -0800 +Subject: [PATCH] drm/v3d: Drop the wait for L2T flush to complete. + +According to Dave, once you've started an L2T flush, all L2T accesses +will be blocked until the flush completes. This fixes a consistent +3-4ms stall between the ioctl and running the job, and 3DMMES Taiji +goes from 27fps to 110fps. + +v2: Leave a note about why we don't need to wait for completion. + +Signed-off-by: Eric Anholt +Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") +Reviewed-by: Dave Emett +Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-4-eric@anholt.net +(cherry picked from commit 51c1b6f9eb3dbdec91b0e3c89f623e634c996bbb) +--- + drivers/gpu/drm/v3d/v3d_gem.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -143,13 +143,13 @@ v3d_invalidate_l2(struct v3d_dev *v3d, i + static void + v3d_flush_l2t(struct v3d_dev *v3d, int core) + { ++ /* While there is a busy bit (V3D_L2TCACTL_L2TFLS), we don't ++ * need to wait for completion before dispatching the job -- ++ * L2T accesses will be stalled until the flush has completed. ++ */ + V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, + V3D_L2TCACTL_L2TFLS | + V3D_SET_FIELD(V3D_L2TCACTL_FLM_FLUSH, V3D_L2TCACTL_FLM)); +- if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & +- V3D_L2TCACTL_L2TFLS), 100)) { +- DRM_ERROR("Timeout waiting for L2T flush\n"); +- } + } + + /* Invalidates the slice caches. These are read-only caches. */ diff --git a/target/linux/brcm2708/patches-4.19/950-0523-drm-v3d-Stop-trying-to-flush-L2C-on-V3D-3.3.patch b/target/linux/brcm2708/patches-4.19/950-0523-drm-v3d-Stop-trying-to-flush-L2C-on-V3D-3.3.patch new file mode 100644 index 0000000000..b1094778b5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0523-drm-v3d-Stop-trying-to-flush-L2C-on-V3D-3.3.patch @@ -0,0 +1,45 @@ +From abee30ca29ec11b62842934de04b5a0033bff21b Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 3 Dec 2018 14:24:37 -0800 +Subject: [PATCH] drm/v3d: Stop trying to flush L2C on V3D 3.3+ + +This cache was replaced with the slice accessing the L2T in the newer +generations. Noted by Dave during review. + +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-5-eric@anholt.net +Reviewed-by: Dave Emett +(cherry picked from commit 7b9d2fe4350a9c12f66ad8cc78c1098226f6c3c2) +--- + drivers/gpu/drm/v3d/v3d_gem.c | 11 ++++++++--- + 1 file changed, 8 insertions(+), 3 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -130,10 +130,15 @@ v3d_flush_l3(struct v3d_dev *v3d) + } + } + +-/* Invalidates the (read-only) L2 cache. */ ++/* Invalidates the (read-only) L2C cache. This was the L2 cache for ++ * uniforms and instructions on V3D 3.2. ++ */ + static void +-v3d_invalidate_l2(struct v3d_dev *v3d, int core) ++v3d_invalidate_l2c(struct v3d_dev *v3d, int core) + { ++ if (v3d->ver > 32) ++ return; ++ + V3D_CORE_WRITE(core, V3D_CTL_L2CACTL, + V3D_L2CACTL_L2CCLR | + V3D_L2CACTL_L2CENA); +@@ -168,7 +173,7 @@ v3d_invalidate_caches(struct v3d_dev *v3 + { + v3d_flush_l3(v3d); + +- v3d_invalidate_l2(v3d, 0); ++ v3d_invalidate_l2c(v3d, 0); + v3d_invalidate_slices(v3d, 0); + v3d_flush_l2t(v3d, 0); + } diff --git a/target/linux/brcm2708/patches-4.19/950-0523-dts-Use-fb-rather-than-leds-for-dpi-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0523-dts-Use-fb-rather-than-leds-for-dpi-overlay.patch deleted file mode 100644 index 0d79d9047e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0523-dts-Use-fb-rather-than-leds-for-dpi-overlay.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 4a09c51bc328b2b83ffa20a6db02ac18139a963d Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Thu, 12 Oct 2017 18:11:32 +0100 -Subject: [PATCH 523/806] dts: Use fb rather than leds for dpi overlay - ---- - arch/arm/boot/dts/overlays/dpi18-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/dpi24-overlay.dts | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/overlays/dpi18-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts -@@ -9,7 +9,7 @@ - // reference on - leds will do - - fragment@0 { -- target = <&leds>; -+ target = <&fb>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&dpi18_pins>; ---- a/arch/arm/boot/dts/overlays/dpi24-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts -@@ -9,7 +9,7 @@ - // reference on - leds will do - - fragment@0 { -- target = <&leds>; -+ target = <&fb>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&dpi24_pins>; diff --git a/target/linux/brcm2708/patches-4.19/950-0524-BCM270X_DT-Minor-tidy-up.patch b/target/linux/brcm2708/patches-4.19/950-0524-BCM270X_DT-Minor-tidy-up.patch deleted file mode 100644 index b6f801de3b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0524-BCM270X_DT-Minor-tidy-up.patch +++ /dev/null @@ -1,95 +0,0 @@ -From 021d54e3ae67e2b02310b9e3e871876a2c3b7eee Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 29 May 2019 15:19:21 +0100 -Subject: [PATCH 524/806] BCM270X_DT: Minor tidy up - -Move arm_pmu out of soc on bcm2710, and labels aren't aliases. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm270x.dtsi | 14 +++++++------- - arch/arm/boot/dts/bcm2710.dtsi | 13 +++++-------- - 2 files changed, 12 insertions(+), 15 deletions(-) - ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -10,11 +10,11 @@ - soc: soc { - - watchdog: watchdog@7e100000 { -- /* Add alias */ -+ /* Add label */ - }; - - random: rng@7e104000 { -- /* Add alias */ -+ /* Add label */ - }; - - gpio@7e200000 { /* gpio */ -@@ -40,18 +40,18 @@ - }; - - spi0: spi@7e204000 { -- /* Add alias */ -+ /* Add label */ - dmas = <&dma 6>, <&dma 7>; - dma-names = "tx", "rx"; - }; - - pixelvalve0: pixelvalve@7e206000 { -- /* Add alias */ -+ /* Add label */ - status = "disabled"; - }; - - pixelvalve1: pixelvalve@7e207000 { -- /* Add alias */ -+ /* Add label */ - status = "disabled"; - }; - -@@ -93,7 +93,7 @@ - }; - - hvs: hvs@7e400000 { -- /* Add alias */ -+ /* Add label */ - status = "disabled"; - }; - -@@ -119,7 +119,7 @@ - }; - - pixelvalve2: pixelvalve@7e807000 { -- /* Add alias */ -+ /* Add label */ - status = "disabled"; - }; - ---- a/arch/arm/boot/dts/bcm2710.dtsi -+++ b/arch/arm/boot/dts/bcm2710.dtsi -@@ -5,18 +5,15 @@ - / { - compatible = "brcm,bcm2837", "brcm,bcm2836"; - -- soc { -- -- arm-pmu { -+ arm-pmu { - #ifdef RPI364 -- compatible = "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; -+ compatible = "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; - #else -- compatible = "arm,cortex-a7-pmu"; -+ compatible = "arm,cortex-a7-pmu"; - #endif -- interrupt-parent = <&local_intc>; -- interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; -- }; -+ }; - -+ soc { - /delete-node/ timer@7e003000; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0524-drm-v3d-Invalidate-the-caches-from-the-outside-in.patch b/target/linux/brcm2708/patches-4.19/950-0524-drm-v3d-Invalidate-the-caches-from-the-outside-in.patch new file mode 100644 index 0000000000..7682ab677e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0524-drm-v3d-Invalidate-the-caches-from-the-outside-in.patch @@ -0,0 +1,36 @@ +From 514653cd51ff6bc14268dc0f98ebb37daa8f0e88 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 3 Dec 2018 14:24:38 -0800 +Subject: [PATCH] drm/v3d: Invalidate the caches from the outside in. + +This would be a fairly obscure race, but let's make sure we don't ever +lose it. + +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-6-eric@anholt.net +Reviewed-by: Dave Emett +(cherry picked from commit aa5beec32e8b78bfcf621e3c3daebfb1644b6365) +--- + drivers/gpu/drm/v3d/v3d_gem.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -171,11 +171,15 @@ v3d_invalidate_slices(struct v3d_dev *v3 + void + v3d_invalidate_caches(struct v3d_dev *v3d) + { ++ /* Invalidate the caches from the outside in. That way if ++ * another CL's concurrent use of nearby memory were to pull ++ * an invalidated cacheline back in, we wouldn't leave stale ++ * data in the inner cache. ++ */ + v3d_flush_l3(v3d); +- + v3d_invalidate_l2c(v3d, 0); +- v3d_invalidate_slices(v3d, 0); + v3d_flush_l2t(v3d, 0); ++ v3d_invalidate_slices(v3d, 0); + } + + static void diff --git a/target/linux/brcm2708/patches-4.19/950-0525-arm-bcm2835-Fix-FIQ-early-ioremap.patch b/target/linux/brcm2708/patches-4.19/950-0525-arm-bcm2835-Fix-FIQ-early-ioremap.patch deleted file mode 100644 index 4d472eb3f9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0525-arm-bcm2835-Fix-FIQ-early-ioremap.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 51d6e1924fd0e9d075bcef61bea5a475a0ad6634 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 20 Feb 2019 08:49:39 +0000 -Subject: [PATCH 525/806] arm: bcm2835: Fix FIQ early ioremap - -The ioremapping creates mappings within the vmalloc area. The -equivalent early function, create_mapping, now checks that the -requested explicit virtual address is between VMALLOC_START and -VMALLOC_END. As there is no reason to have any correlation between -the physical and virtual addresses, put the required mappings at -VMALLOC_START and above. - -Signed-off-by: Phil Elwell ---- - arch/arm/mach-bcm/board_bcm2835.c | 21 +++++++++++++++------ - 1 file changed, 15 insertions(+), 6 deletions(-) - ---- a/arch/arm/mach-bcm/board_bcm2835.c -+++ b/arch/arm/mach-bcm/board_bcm2835.c -@@ -14,17 +14,20 @@ - - #include - #include -+#include - #include - #include - #include - - #include - #include -+#include -+#include - - #include "platsmp.h" - --#define BCM2835_USB_VIRT_BASE 0xf0980000 --#define BCM2835_USB_VIRT_MPHI 0xf0006000 -+#define BCM2835_USB_VIRT_BASE (VMALLOC_START) -+#define BCM2835_USB_VIRT_MPHI (VMALLOC_START + 0x10000) - - static void __init bcm2835_init(void) - { -@@ -83,20 +86,26 @@ static int __init bcm2835_map_usb(unsign - - static void __init bcm2835_map_io(void) - { -- const __be32 *ranges; -+ const __be32 *ranges, *address_cells; -+ unsigned long root, addr_cells; - int soc, len; - unsigned long p2b_offset; - - debug_ll_io_init(); - -+ root = of_get_flat_dt_root(); - /* Find out how to map bus to physical address first from soc/ranges */ -- soc = of_get_flat_dt_subnode_by_name(of_get_flat_dt_root(), "soc"); -+ soc = of_get_flat_dt_subnode_by_name(root, "soc"); - if (soc < 0) - return; -+ address_cells = of_get_flat_dt_prop(root, "#address-cells", &len); -+ if (!address_cells || len < (sizeof(unsigned long))) -+ return; -+ addr_cells = be32_to_cpu(address_cells[0]); - ranges = of_get_flat_dt_prop(soc, "ranges", &len); -- if (!ranges || len < (sizeof(unsigned long) * 3)) -+ if (!ranges || len < (sizeof(unsigned long) * (2 + addr_cells))) - return; -- p2b_offset = be32_to_cpu(ranges[0]) - be32_to_cpu(ranges[1]); -+ p2b_offset = be32_to_cpu(ranges[0]) - be32_to_cpu(ranges[addr_cells]); - - /* Now search for bcm2708-usb node in device tree */ - of_scan_flat_dt(bcm2835_map_usb, &p2b_offset); diff --git a/target/linux/brcm2708/patches-4.19/950-0525-drm-v3d-Fix-BO-stats-accounting-for-dma-buf-imported.patch b/target/linux/brcm2708/patches-4.19/950-0525-drm-v3d-Fix-BO-stats-accounting-for-dma-buf-imported.patch new file mode 100644 index 0000000000..fc2b566357 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0525-drm-v3d-Fix-BO-stats-accounting-for-dma-buf-imported.patch @@ -0,0 +1,40 @@ +From f91d0382b735a3d7711f6b160d80627cd4be54af Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 7 Feb 2019 15:26:13 -0800 +Subject: [PATCH] drm/v3d: Fix BO stats accounting for dma-buf-imported + buffers. + +We always decrement at GEM free, so make sure we increment at GEM +creation for dma-bufs. + +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20190207232613.24981-1-eric@anholt.net +Reviewed-by: Daniel Vetter +Signed-off-by: Maxime Ripard +(cherry picked from commit cc3f60cfd4f2752f1bad7eaa3839855c15347abc) +--- + drivers/gpu/drm/v3d/v3d_bo.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/gpu/drm/v3d/v3d_bo.c ++++ b/drivers/gpu/drm/v3d/v3d_bo.c +@@ -282,6 +282,7 @@ v3d_prime_import_sg_table(struct drm_dev + struct dma_buf_attachment *attach, + struct sg_table *sgt) + { ++ struct v3d_dev *v3d = to_v3d_dev(dev); + struct drm_gem_object *obj; + struct v3d_bo *bo; + +@@ -296,6 +297,11 @@ v3d_prime_import_sg_table(struct drm_dev + obj->import_attach = attach; + v3d_bo_get_pages(bo); + ++ mutex_lock(&v3d->bo_lock); ++ v3d->bo_stats.num_allocated++; ++ v3d->bo_stats.pages_allocated += obj->size >> PAGE_SHIFT; ++ mutex_unlock(&v3d->bo_lock); ++ + v3d_mmu_insert_ptes(bo); + + return obj; diff --git a/target/linux/brcm2708/patches-4.19/950-0526-Fix-copy_from_user-if-BCM2835_FAST_MEMCPY-n.patch b/target/linux/brcm2708/patches-4.19/950-0526-Fix-copy_from_user-if-BCM2835_FAST_MEMCPY-n.patch deleted file mode 100644 index 932d9eb004..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0526-Fix-copy_from_user-if-BCM2835_FAST_MEMCPY-n.patch +++ /dev/null @@ -1,39 +0,0 @@ -From ab2695d38f4ffadde05c2275ac68f4aad68ef336 Mon Sep 17 00:00:00 2001 -From: Tim Gover -Date: Thu, 14 Mar 2019 10:16:02 +0000 -Subject: [PATCH 526/806] Fix copy_from_user if BCM2835_FAST_MEMCPY=n - -The change which introduced CONFIG_BCM2835_FAST_MEMCPY unconditionally -changed the behaviour of arm_copy_from_user. The page pinning code -is not safe on ARMv7 if LPAE & high memory is enabled and causes -crashes which look like PTE corruption. - -Make __copy_from_user_memcpy conditional on CONFIG_2835_FAST_MEMCPY=y -which is really an ARMv6 / Pi1 optimization and not necessary on newer -ARM processors. ---- - arch/arm/lib/uaccess_with_memcpy.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/arch/arm/lib/uaccess_with_memcpy.c -+++ b/arch/arm/lib/uaccess_with_memcpy.c -@@ -257,6 +257,7 @@ arm_copy_to_user(void __user *to, const - unsigned long __must_check - arm_copy_from_user(void *to, const void __user *from, unsigned long n) - { -+#ifdef CONFIG_BCM2835_FAST_MEMCPY - /* - * This test is stubbed out of the main function above to keep - * the overhead for small copies low by avoiding a large -@@ -271,6 +272,11 @@ arm_copy_from_user(void *to, const void - } else { - n = __copy_from_user_memcpy(to, from, n); - } -+#else -+ unsigned long ua_flags = uaccess_save_and_enable(); -+ n = __copy_from_user_std(to, from, n); -+ uaccess_restore(ua_flags); -+#endif - return n; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0526-drm-v3d-Update-top-level-kerneldoc-for-the-addition-.patch b/target/linux/brcm2708/patches-4.19/950-0526-drm-v3d-Update-top-level-kerneldoc-for-the-addition-.patch new file mode 100644 index 0000000000..df8cc1a352 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0526-drm-v3d-Update-top-level-kerneldoc-for-the-addition-.patch @@ -0,0 +1,30 @@ +From 752f66d4482db75db81e5255f5071de1e47ac121 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 7 Feb 2019 12:09:58 -0800 +Subject: [PATCH] drm/v3d: Update top-level kerneldoc for the addition + of TFU. + +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20190207201001.5730-1-eric@anholt.net +Reviewed-by: Thomas Spurden +Signed-off-by: Maxime Ripard +(cherry picked from commit fd347df16d4ed2eef565344b8f16a1134bddf185) +--- + drivers/gpu/drm/v3d/v3d_drv.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_drv.c ++++ b/drivers/gpu/drm/v3d/v3d_drv.c +@@ -7,9 +7,9 @@ + * This driver supports the Broadcom V3D 3.3 and 4.1 OpenGL ES GPUs. + * For V3D 2.x support, see the VC4 driver. + * +- * Currently only single-core rendering using the binner and renderer +- * is supported. The TFU (texture formatting unit) and V3D 4.x's CSD +- * (compute shader dispatch) are not yet supported. ++ * Currently only single-core rendering using the binner and renderer, ++ * along with TFU (texture formatting unit) rendering is supported. ++ * V3D 4.x's CSD (compute shader dispatch) is not yet supported. + */ + + #include diff --git a/target/linux/brcm2708/patches-4.19/950-0527-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch b/target/linux/brcm2708/patches-4.19/950-0527-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch deleted file mode 100644 index 3d9cc8c660..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0527-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch +++ /dev/null @@ -1,1187 +0,0 @@ -From ac1212c0f8b611be6df28f252ebbad80b775ee0f Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 19 Feb 2019 22:06:59 +0000 -Subject: [PATCH 527/806] PCI: brcmstb: Add Broadcom STB PCIe host controller - driver - -This commit adds the basic Broadcom STB PCIe controller. Missing is -the ability to process MSI and also handle dma-ranges for inbound -memory accesses. These two functionalities are added in subsequent -commits. - -The PCIe block contains an MDIO interface. This is a local interface -only accessible by the PCIe controller. It cannot be used or shared -by any other HW. As such, the small amount of code for this -controller is included in this driver as there is little upside to put -it elsewhere. - -Signed-off-by: Jim Quinlan ---- - drivers/pci/controller/Kconfig | 9 + - drivers/pci/controller/Makefile | 2 +- - drivers/pci/controller/pcie-brcmstb.c | 1097 +++++++++++++++++++++++++ - include/soc/brcmstb/memory_api.h | 25 + - 4 files changed, 1132 insertions(+), 1 deletion(-) - create mode 100644 drivers/pci/controller/pcie-brcmstb.c - create mode 100644 include/soc/brcmstb/memory_api.h - ---- a/drivers/pci/controller/Kconfig -+++ b/drivers/pci/controller/Kconfig -@@ -278,5 +278,14 @@ config VMD - To compile this driver as a module, choose M here: the - module will be called vmd. - -+config PCIE_BRCMSTB -+ tristate "Broadcom Brcmstb PCIe platform host driver" -+ depends on ARCH_BRCMSTB || BMIPS_GENERIC -+ depends on OF -+ depends on SOC_BRCMSTB -+ default ARCH_BRCMSTB || BMIPS_GENERIC -+ help -+ Adds support for Broadcom Settop Box PCIe host controller. -+ - source "drivers/pci/controller/dwc/Kconfig" - endmenu ---- a/drivers/pci/controller/Makefile -+++ b/drivers/pci/controller/Makefile -@@ -28,11 +28,11 @@ obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie - obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o - obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o - obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o -+obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o - obj-$(CONFIG_VMD) += vmd.o - # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW - obj-y += dwc/ - -- - # The following drivers are for devices that use the generic ACPI - # pci_root.c driver but don't support standard ECAM config access. - # They contain MCFG quirks to replace the generic ECAM accessors with ---- /dev/null -+++ b/drivers/pci/controller/pcie-brcmstb.c -@@ -0,0 +1,1097 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* Copyright (C) 2009 - 2017 Broadcom */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "../pci.h" -+ -+/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ -+#define BRCM_PCIE_CAP_REGS 0x00ac -+ -+/* -+ * Broadcom Settop Box PCIe Register Offsets. The names are from -+ * the chip's RDB and we use them here so that a script can correlate -+ * this code and the RDB to prevent discrepancies. -+ */ -+#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188 -+#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c -+#define PCIE_RC_DL_MDIO_ADDR 0x1100 -+#define PCIE_RC_DL_MDIO_WR_DATA 0x1104 -+#define PCIE_RC_DL_MDIO_RD_DATA 0x1108 -+#define PCIE_MISC_MISC_CTRL 0x4008 -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010 -+#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c -+#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 -+#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 -+#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c -+#define PCIE_MISC_PCIE_CTRL 0x4064 -+#define PCIE_MISC_PCIE_STATUS 0x4068 -+#define PCIE_MISC_REVISION 0x406c -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070 -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080 -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 -+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 -+#define PCIE_INTR2_CPU_BASE 0x4300 -+ -+/* -+ * Broadcom Settop Box PCIe Register Field shift and mask info. The -+ * names are from the chip's RDB and we use them here so that a script -+ * can correlate this code and the RDB to prevent discrepancies. -+ */ -+#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc -+#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_SHIFT 0x2 -+#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff -+#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_SHIFT 0x0 -+#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000 -+#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_SHIFT 0xc -+#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000 -+#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_SHIFT 0xd -+#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000 -+#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_SHIFT 0x14 -+#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000 -+#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_SHIFT 0x1b -+#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK 0x7c00000 -+#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_SHIFT 0x16 -+#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK 0x1f -+#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_SHIFT 0x0 -+#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f -+#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_SHIFT 0x0 -+#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f -+#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_SHIFT 0x0 -+#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f -+#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_SHIFT 0x0 -+#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4 -+#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_SHIFT 0x2 -+#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1 -+#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_SHIFT 0x0 -+#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80 -+#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_SHIFT 0x7 -+#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20 -+#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_SHIFT 0x5 -+#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10 -+#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_SHIFT 0x4 -+#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40 -+#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_SHIFT 0x6 -+#define PCIE_MISC_REVISION_MAJMIN_MASK 0xffff -+#define PCIE_MISC_REVISION_MAJMIN_SHIFT 0 -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000 -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_SHIFT 0x14 -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0 -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_SHIFT 0x4 -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS 0xc -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_SHIFT 0x0 -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff -+#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_SHIFT 0x0 -+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2 -+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_SHIFT 0x1 -+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000 -+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_SHIFT 0x1b -+#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1 -+#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0 -+ -+#define BRCM_NUM_PCIE_OUT_WINS 0x4 -+#define BRCM_MAX_SCB 0x4 -+ -+#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL -+#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL -+ -+#define BURST_SIZE_128 0 -+#define BURST_SIZE_256 1 -+#define BURST_SIZE_512 2 -+ -+/* Offsets from PCIE_INTR2_CPU_BASE */ -+#define STATUS 0x0 -+#define SET 0x4 -+#define CLR 0x8 -+#define MASK_STATUS 0xc -+#define MASK_SET 0x10 -+#define MASK_CLR 0x14 -+ -+#define PCIE_BUSNUM_SHIFT 20 -+#define PCIE_SLOT_SHIFT 15 -+#define PCIE_FUNC_SHIFT 12 -+ -+#if defined(__BIG_ENDIAN) -+#define DATA_ENDIAN 2 /* PCIe->DDR inbound traffic */ -+#define MMIO_ENDIAN 2 /* CPU->PCIe outbound traffic */ -+#else -+#define DATA_ENDIAN 0 -+#define MMIO_ENDIAN 0 -+#endif -+ -+#define MDIO_PORT0 0x0 -+#define MDIO_DATA_MASK 0x7fffffff -+#define MDIO_DATA_SHIFT 0x0 -+#define MDIO_PORT_MASK 0xf0000 -+#define MDIO_PORT_SHIFT 0x16 -+#define MDIO_REGAD_MASK 0xffff -+#define MDIO_REGAD_SHIFT 0x0 -+#define MDIO_CMD_MASK 0xfff00000 -+#define MDIO_CMD_SHIFT 0x14 -+#define MDIO_CMD_READ 0x1 -+#define MDIO_CMD_WRITE 0x0 -+#define MDIO_DATA_DONE_MASK 0x80000000 -+#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0) -+#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1) -+#define SSC_REGS_ADDR 0x1100 -+#define SET_ADDR_OFFSET 0x1f -+#define SSC_CNTL_OFFSET 0x2 -+#define SSC_CNTL_OVRD_EN_MASK 0x8000 -+#define SSC_CNTL_OVRD_EN_SHIFT 0xf -+#define SSC_CNTL_OVRD_VAL_MASK 0x4000 -+#define SSC_CNTL_OVRD_VAL_SHIFT 0xe -+#define SSC_STATUS_OFFSET 0x1 -+#define SSC_STATUS_SSC_MASK 0x400 -+#define SSC_STATUS_SSC_SHIFT 0xa -+#define SSC_STATUS_PLL_LOCK_MASK 0x800 -+#define SSC_STATUS_PLL_LOCK_SHIFT 0xb -+ -+#define IDX_ADDR(pcie) \ -+ ((pcie)->reg_offsets[EXT_CFG_INDEX]) -+#define DATA_ADDR(pcie) \ -+ ((pcie)->reg_offsets[EXT_CFG_DATA]) -+#define PCIE_RGR1_SW_INIT_1(pcie) \ -+ ((pcie)->reg_offsets[RGR1_SW_INIT_1]) -+ -+enum { -+ RGR1_SW_INIT_1, -+ EXT_CFG_INDEX, -+ EXT_CFG_DATA, -+}; -+ -+enum { -+ RGR1_SW_INIT_1_INIT_MASK, -+ RGR1_SW_INIT_1_INIT_SHIFT, -+ RGR1_SW_INIT_1_PERST_MASK, -+ RGR1_SW_INIT_1_PERST_SHIFT, -+}; -+ -+enum pcie_type { -+ BCM7425, -+ BCM7435, -+ GENERIC, -+ BCM7278, -+}; -+ -+struct brcm_window { -+ dma_addr_t pcie_addr; -+ phys_addr_t cpu_addr; -+ dma_addr_t size; -+}; -+ -+/* Internal PCIe Host Controller Information.*/ -+struct brcm_pcie { -+ struct device *dev; -+ void __iomem *base; -+ struct list_head resources; -+ int irq; -+ struct clk *clk; -+ struct pci_bus *root_bus; -+ struct device_node *dn; -+ int id; -+ bool suspended; -+ int num_out_wins; -+ bool ssc; -+ int gen; -+ struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS]; -+ unsigned int rev; -+ const int *reg_offsets; -+ const int *reg_field_info; -+ enum pcie_type type; -+}; -+ -+struct pcie_cfg_data { -+ const int *reg_field_info; -+ const int *offsets; -+ const enum pcie_type type; -+}; -+ -+static const int pcie_reg_field_info[] = { -+ [RGR1_SW_INIT_1_INIT_MASK] = 0x2, -+ [RGR1_SW_INIT_1_INIT_SHIFT] = 0x1, -+}; -+ -+static const int pcie_reg_field_info_bcm7278[] = { -+ [RGR1_SW_INIT_1_INIT_MASK] = 0x1, -+ [RGR1_SW_INIT_1_INIT_SHIFT] = 0x0, -+}; -+ -+static const int pcie_offset_bcm7425[] = { -+ [RGR1_SW_INIT_1] = 0x8010, -+ [EXT_CFG_INDEX] = 0x8300, -+ [EXT_CFG_DATA] = 0x8304, -+}; -+ -+static const struct pcie_cfg_data bcm7425_cfg = { -+ .reg_field_info = pcie_reg_field_info, -+ .offsets = pcie_offset_bcm7425, -+ .type = BCM7425, -+}; -+ -+static const int pcie_offsets[] = { -+ [RGR1_SW_INIT_1] = 0x9210, -+ [EXT_CFG_INDEX] = 0x9000, -+ [EXT_CFG_DATA] = 0x9004, -+}; -+ -+static const struct pcie_cfg_data bcm7435_cfg = { -+ .reg_field_info = pcie_reg_field_info, -+ .offsets = pcie_offsets, -+ .type = BCM7435, -+}; -+ -+static const struct pcie_cfg_data generic_cfg = { -+ .reg_field_info = pcie_reg_field_info, -+ .offsets = pcie_offsets, -+ .type = GENERIC, -+}; -+ -+static const int pcie_offset_bcm7278[] = { -+ [RGR1_SW_INIT_1] = 0xc010, -+ [EXT_CFG_INDEX] = 0x9000, -+ [EXT_CFG_DATA] = 0x9004, -+}; -+ -+static const struct pcie_cfg_data bcm7278_cfg = { -+ .reg_field_info = pcie_reg_field_info_bcm7278, -+ .offsets = pcie_offset_bcm7278, -+ .type = BCM7278, -+}; -+ -+static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn, -+ int where); -+ -+static struct pci_ops brcm_pcie_ops = { -+ .map_bus = brcm_pcie_map_conf, -+ .read = pci_generic_config_read, -+ .write = pci_generic_config_write, -+}; -+ -+#if defined(CONFIG_MIPS) -+/* Broadcom MIPs HW implicitly does the swapping if necessary */ -+#define bcm_readl(a) __raw_readl(a) -+#define bcm_writel(d, a) __raw_writel(d, a) -+#define bcm_readw(a) __raw_readw(a) -+#define bcm_writew(d, a) __raw_writew(d, a) -+#else -+#define bcm_readl(a) readl(a) -+#define bcm_writel(d, a) writel(d, a) -+#define bcm_readw(a) readw(a) -+#define bcm_writew(d, a) writew(d, a) -+#endif -+ -+/* These macros extract/insert fields to host controller's register set. */ -+#define RD_FLD(base, reg, field) \ -+ rd_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT) -+#define WR_FLD(base, reg, field, val) \ -+ wr_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val) -+#define WR_FLD_RB(base, reg, field, val) \ -+ wr_fld_rb(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val) -+#define WR_FLD_WITH_OFFSET(base, off, reg, field, val) \ -+ wr_fld(base + reg + off, reg##_##field##_MASK, \ -+ reg##_##field##_SHIFT, val) -+#define EXTRACT_FIELD(val, reg, field) \ -+ ((val & reg##_##field##_MASK) >> reg##_##field##_SHIFT) -+#define INSERT_FIELD(val, reg, field, field_val) \ -+ ((val & ~reg##_##field##_MASK) | \ -+ (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT))) -+ -+static phys_addr_t scb_size[BRCM_MAX_SCB]; -+static int num_memc; -+static int num_pcie; -+static DEFINE_MUTEX(brcm_pcie_lock); -+ -+static u32 rd_fld(void __iomem *p, u32 mask, int shift) -+{ -+ return (bcm_readl(p) & mask) >> shift; -+} -+ -+static void wr_fld(void __iomem *p, u32 mask, int shift, u32 val) -+{ -+ u32 reg = bcm_readl(p); -+ -+ reg = (reg & ~mask) | ((val << shift) & mask); -+ bcm_writel(reg, p); -+} -+ -+static void wr_fld_rb(void __iomem *p, u32 mask, int shift, u32 val) -+{ -+ wr_fld(p, mask, shift, val); -+ (void)bcm_readl(p); -+} -+ -+static const char *link_speed_to_str(int s) -+{ -+ switch (s) { -+ case 1: -+ return "2.5"; -+ case 2: -+ return "5.0"; -+ case 3: -+ return "8.0"; -+ default: -+ break; -+ } -+ return "???"; -+} -+ -+/* -+ * The roundup_pow_of_two() from log2.h invokes -+ * __roundup_pow_of_two(unsigned long), but we really need a -+ * such a function to take a native u64 since unsigned long -+ * is 32 bits on some configurations. So we provide this helper -+ * function below. -+ */ -+static u64 roundup_pow_of_two_64(u64 n) -+{ -+ return 1ULL << fls64(n - 1); -+} -+ -+/* -+ * This is to convert the size of the inbound "BAR" region to the -+ * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE -+ */ -+int encode_ibar_size(u64 size) -+{ -+ int log2_in = ilog2(size); -+ -+ if (log2_in >= 12 && log2_in <= 15) -+ /* Covers 4KB to 32KB (inclusive) */ -+ return (log2_in - 12) + 0x1c; -+ else if (log2_in >= 16 && log2_in <= 37) -+ /* Covers 64KB to 32GB, (inclusive) */ -+ return log2_in - 15; -+ /* Something is awry so disable */ -+ return 0; -+} -+ -+static u32 mdio_form_pkt(int port, int regad, int cmd) -+{ -+ u32 pkt = 0; -+ -+ pkt |= (port << MDIO_PORT_SHIFT) & MDIO_PORT_MASK; -+ pkt |= (regad << MDIO_REGAD_SHIFT) & MDIO_REGAD_MASK; -+ pkt |= (cmd << MDIO_CMD_SHIFT) & MDIO_CMD_MASK; -+ -+ return pkt; -+} -+ -+/* negative return value indicates error */ -+static int mdio_read(void __iomem *base, u8 port, u8 regad) -+{ -+ int tries; -+ u32 data; -+ -+ bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_READ), -+ base + PCIE_RC_DL_MDIO_ADDR); -+ bcm_readl(base + PCIE_RC_DL_MDIO_ADDR); -+ -+ data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA); -+ for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) { -+ udelay(10); -+ data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA); -+ } -+ -+ return MDIO_RD_DONE(data) -+ ? (data & MDIO_DATA_MASK) >> MDIO_DATA_SHIFT -+ : -EIO; -+} -+ -+/* negative return value indicates error */ -+static int mdio_write(void __iomem *base, u8 port, u8 regad, u16 wrdata) -+{ -+ int tries; -+ u32 data; -+ -+ bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_WRITE), -+ base + PCIE_RC_DL_MDIO_ADDR); -+ bcm_readl(base + PCIE_RC_DL_MDIO_ADDR); -+ bcm_writel(MDIO_DATA_DONE_MASK | wrdata, -+ base + PCIE_RC_DL_MDIO_WR_DATA); -+ -+ data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA); -+ for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) { -+ udelay(10); -+ data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA); -+ } -+ -+ return MDIO_WT_DONE(data) ? 0 : -EIO; -+} -+ -+/* -+ * Configures device for Spread Spectrum Clocking (SSC) mode; a negative -+ * return value indicates error. -+ */ -+static int set_ssc(void __iomem *base) -+{ -+ int tmp; -+ u16 wrdata; -+ int pll, ssc; -+ -+ tmp = mdio_write(base, MDIO_PORT0, SET_ADDR_OFFSET, SSC_REGS_ADDR); -+ if (tmp < 0) -+ return tmp; -+ -+ tmp = mdio_read(base, MDIO_PORT0, SSC_CNTL_OFFSET); -+ if (tmp < 0) -+ return tmp; -+ -+ wrdata = INSERT_FIELD(tmp, SSC_CNTL_OVRD, EN, 1); -+ wrdata = INSERT_FIELD(wrdata, SSC_CNTL_OVRD, VAL, 1); -+ tmp = mdio_write(base, MDIO_PORT0, SSC_CNTL_OFFSET, wrdata); -+ if (tmp < 0) -+ return tmp; -+ -+ usleep_range(1000, 2000); -+ tmp = mdio_read(base, MDIO_PORT0, SSC_STATUS_OFFSET); -+ if (tmp < 0) -+ return tmp; -+ -+ ssc = EXTRACT_FIELD(tmp, SSC_STATUS, SSC); -+ pll = EXTRACT_FIELD(tmp, SSC_STATUS, PLL_LOCK); -+ -+ return (ssc && pll) ? 0 : -EIO; -+} -+ -+/* Limits operation to a specific generation (1, 2, or 3) */ -+static void set_gen(void __iomem *base, int gen) -+{ -+ u32 lnkcap = bcm_readl(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); -+ u16 lnkctl2 = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); -+ -+ lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen; -+ bcm_writel(lnkcap, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); -+ -+ lnkctl2 = (lnkctl2 & ~0xf) | gen; -+ bcm_writew(lnkctl2, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); -+} -+ -+static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie, -+ unsigned int win, phys_addr_t cpu_addr, -+ dma_addr_t pcie_addr, dma_addr_t size) -+{ -+ void __iomem *base = pcie->base; -+ phys_addr_t cpu_addr_mb, limit_addr_mb; -+ u32 tmp; -+ -+ /* Set the base of the pcie_addr window */ -+ bcm_writel(lower_32_bits(pcie_addr) + MMIO_ENDIAN, -+ base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + (win * 8)); -+ bcm_writel(upper_32_bits(pcie_addr), -+ base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + (win * 8)); -+ -+ cpu_addr_mb = cpu_addr >> 20; -+ limit_addr_mb = (cpu_addr + size - 1) >> 20; -+ -+ /* Write the addr base low register */ -+ WR_FLD_WITH_OFFSET(base, (win * 4), -+ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT, -+ BASE, cpu_addr_mb); -+ /* Write the addr limit low register */ -+ WR_FLD_WITH_OFFSET(base, (win * 4), -+ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT, -+ LIMIT, limit_addr_mb); -+ -+ if (pcie->type != BCM7435 && pcie->type != BCM7425) { -+ /* Write the cpu addr high register */ -+ tmp = (u32)(cpu_addr_mb >> -+ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS); -+ WR_FLD_WITH_OFFSET(base, (win * 8), -+ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI, -+ BASE, tmp); -+ /* Write the cpu limit high register */ -+ tmp = (u32)(limit_addr_mb >> -+ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS); -+ WR_FLD_WITH_OFFSET(base, (win * 8), -+ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI, -+ LIMIT, tmp); -+ } -+} -+ -+/* Configuration space read/write support */ -+static int cfg_index(int busnr, int devfn, int reg) -+{ -+ return ((PCI_SLOT(devfn) & 0x1f) << PCIE_SLOT_SHIFT) -+ | ((PCI_FUNC(devfn) & 0x07) << PCIE_FUNC_SHIFT) -+ | (busnr << PCIE_BUSNUM_SHIFT) -+ | (reg & ~3); -+} -+ -+/* The controller is capable of serving in both RC and EP roles */ -+static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie) -+{ -+ void __iomem *base = pcie->base; -+ u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS); -+ -+ return !!EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PORT); -+} -+ -+static bool brcm_pcie_link_up(struct brcm_pcie *pcie) -+{ -+ void __iomem *base = pcie->base; -+ u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS); -+ u32 dla = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_DL_ACTIVE); -+ u32 plu = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PHYLINKUP); -+ -+ return (dla && plu) ? true : false; -+} -+ -+static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn, -+ int where) -+{ -+ struct brcm_pcie *pcie = bus->sysdata; -+ void __iomem *base = pcie->base; -+ int idx; -+ -+ /* Accesses to the RC go right to the RC registers if slot==0 */ -+ if (pci_is_root_bus(bus)) -+ return PCI_SLOT(devfn) ? NULL : base + where; -+ -+ /* For devices, write to the config space index register */ -+ idx = cfg_index(bus->number, devfn, where); -+ bcm_writel(idx, pcie->base + IDX_ADDR(pcie)); -+ return base + DATA_ADDR(pcie) + (where & 0x3); -+} -+ -+static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, -+ unsigned int val) -+{ -+ unsigned int shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT]; -+ u32 mask = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK]; -+ -+ wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie), mask, shift, val); -+} -+ -+static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, -+ unsigned int val) -+{ -+ if (pcie->type != BCM7278) -+ wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie), -+ PCIE_RGR1_SW_INIT_1_PERST_MASK, -+ PCIE_RGR1_SW_INIT_1_PERST_SHIFT, val); -+ else -+ /* Assert = 0, de-assert = 1 on 7278 */ -+ WR_FLD_RB(pcie->base, PCIE_MISC_PCIE_CTRL, PCIE_PERSTB, !val); -+} -+ -+static int brcm_pcie_add_controller(struct brcm_pcie *pcie) -+{ -+ int i, ret = 0; -+ -+ mutex_lock(&brcm_pcie_lock); -+ if (num_pcie > 0) { -+ num_pcie++; -+ goto done; -+ } -+ -+ /* Determine num_memc and their sizes */ -+ for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { -+ u64 size = brcmstb_memory_memc_size(i); -+ -+ if (size == (u64)-1) { -+ dev_err(pcie->dev, "cannot get memc%d size\n", i); -+ ret = -EINVAL; -+ goto done; -+ } else if (size) { -+ scb_size[i] = roundup_pow_of_two_64(size); -+ num_memc++; -+ } else { -+ break; -+ } -+ } -+ if (!ret && num_memc == 0) { -+ ret = -EINVAL; -+ goto done; -+ } -+ -+ num_pcie++; -+done: -+ mutex_unlock(&brcm_pcie_lock); -+ return ret; -+} -+ -+static void brcm_pcie_remove_controller(struct brcm_pcie *pcie) -+{ -+ mutex_lock(&brcm_pcie_lock); -+ if (--num_pcie == 0) -+ num_memc = 0; -+ mutex_unlock(&brcm_pcie_lock); -+} -+ -+static int brcm_pcie_parse_request_of_pci_ranges(struct brcm_pcie *pcie) -+{ -+ struct resource_entry *win; -+ int ret; -+ -+ ret = devm_of_pci_get_host_bridge_resources(pcie->dev, 0, 0xff, -+ &pcie->resources, NULL); -+ if (ret) { -+ dev_err(pcie->dev, "failed to get host resources\n"); -+ return ret; -+ } -+ -+ resource_list_for_each_entry(win, &pcie->resources) { -+ struct resource *parent, *res = win->res; -+ dma_addr_t offset = (dma_addr_t)win->offset; -+ -+ if (resource_type(res) == IORESOURCE_IO) { -+ parent = &ioport_resource; -+ } else if (resource_type(res) == IORESOURCE_MEM) { -+ if (pcie->num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) { -+ dev_err(pcie->dev, "too many outbound wins\n"); -+ return -EINVAL; -+ } -+ pcie->out_wins[pcie->num_out_wins].cpu_addr -+ = (phys_addr_t)res->start; -+ pcie->out_wins[pcie->num_out_wins].pcie_addr -+ = (dma_addr_t)(res->start -+ - (phys_addr_t)offset); -+ pcie->out_wins[pcie->num_out_wins].size -+ = (dma_addr_t)(res->end - res->start + 1); -+ pcie->num_out_wins++; -+ parent = &iomem_resource; -+ } else { -+ continue; -+ } -+ -+ ret = devm_request_resource(pcie->dev, parent, res); -+ if (ret) { -+ dev_err(pcie->dev, "failed to get res %pR\n", res); -+ return ret; -+ } -+ } -+ return 0; -+} -+ -+static int brcm_pcie_setup(struct brcm_pcie *pcie) -+{ -+ void __iomem *base = pcie->base; -+ unsigned int scb_size_val; -+ u64 rc_bar2_offset, rc_bar2_size, total_mem_size = 0; -+ u32 tmp, burst; -+ int i, j, ret, limit; -+ u16 nlw, cls, lnksta; -+ bool ssc_good = false; -+ struct device *dev = pcie->dev; -+ -+ /* Reset the bridge */ -+ brcm_pcie_bridge_sw_init_set(pcie, 1); -+ -+ /* -+ * Ensure that the fundamental reset is asserted, except for 7278, -+ * which fails if we do this. -+ */ -+ if (pcie->type != BCM7278) -+ brcm_pcie_perst_set(pcie, 1); -+ -+ usleep_range(100, 200); -+ -+ /* Take the bridge out of reset */ -+ brcm_pcie_bridge_sw_init_set(pcie, 0); -+ -+ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0); -+ /* Wait for SerDes to be stable */ -+ usleep_range(100, 200); -+ -+ /* Grab the PCIe hw revision number */ -+ tmp = bcm_readl(base + PCIE_MISC_REVISION); -+ pcie->rev = EXTRACT_FIELD(tmp, PCIE_MISC_REVISION, MAJMIN); -+ -+ /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */ -+ tmp = INSERT_FIELD(0, PCIE_MISC_MISC_CTRL, SCB_ACCESS_EN, 1); -+ tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, CFG_READ_UR_MODE, 1); -+ burst = (pcie->type == GENERIC || pcie->type == BCM7278) -+ ? BURST_SIZE_512 : BURST_SIZE_256; -+ tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE, burst); -+ bcm_writel(tmp, base + PCIE_MISC_MISC_CTRL); -+ -+ /* -+ * Set up inbound memory view for the EP (called RC_BAR2, -+ * not to be confused with the BARs that are advertised by -+ * the EP). -+ */ -+ for (i = 0; i < num_memc; i++) -+ total_mem_size += scb_size[i]; -+ -+ /* -+ * The PCIe host controller by design must set the inbound -+ * viewport to be a contiguous arrangement of all of the -+ * system's memory. In addition, its size mut be a power of -+ * two. To further complicate matters, the viewport must -+ * start on a pcie-address that is aligned on a multiple of its -+ * size. If a portion of the viewport does not represent -+ * system memory -- e.g. 3GB of memory requires a 4GB viewport -+ * -- we can map the outbound memory in or after 3GB and even -+ * though the viewport will overlap the outbound memory the -+ * controller will know to send outbound memory downstream and -+ * everything else upstream. -+ */ -+ rc_bar2_size = roundup_pow_of_two_64(total_mem_size); -+ -+ /* -+ * Set simple configuration based on memory sizes -+ * only. We always start the viewport at address 0. -+ */ -+ rc_bar2_offset = 0; -+ -+ tmp = lower_32_bits(rc_bar2_offset); -+ tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE, -+ encode_ibar_size(rc_bar2_size)); -+ bcm_writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO); -+ bcm_writel(upper_32_bits(rc_bar2_offset), -+ base + PCIE_MISC_RC_BAR2_CONFIG_HI); -+ -+ scb_size_val = scb_size[0] -+ ? ilog2(scb_size[0]) - 15 : 0xf; /* 0xf is 1GB */ -+ WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB0_SIZE, scb_size_val); -+ -+ if (num_memc > 1) { -+ scb_size_val = scb_size[1] -+ ? ilog2(scb_size[1]) - 15 : 0xf; /* 0xf is 1GB */ -+ WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB1_SIZE, scb_size_val); -+ } -+ -+ if (num_memc > 2) { -+ scb_size_val = scb_size[2] -+ ? ilog2(scb_size[2]) - 15 : 0xf; /* 0xf is 1GB */ -+ WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB2_SIZE, scb_size_val); -+ } -+ -+ /* disable the PCIe->GISB memory window (RC_BAR1) */ -+ WR_FLD(base, PCIE_MISC_RC_BAR1_CONFIG_LO, SIZE, 0); -+ -+ /* disable the PCIe->SCB memory window (RC_BAR3) */ -+ WR_FLD(base, PCIE_MISC_RC_BAR3_CONFIG_LO, SIZE, 0); -+ -+ if (!pcie->suspended) { -+ /* clear any interrupts we find on boot */ -+ bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + CLR); -+ (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + CLR); -+ } -+ -+ /* Mask all interrupts since we are not handling any yet */ -+ bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + MASK_SET); -+ (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + MASK_SET); -+ -+ if (pcie->gen) -+ set_gen(base, pcie->gen); -+ -+ /* Unassert the fundamental reset */ -+ brcm_pcie_perst_set(pcie, 0); -+ -+ /* -+ * Give the RC/EP time to wake up, before trying to configure RC. -+ * Intermittently check status for link-up, up to a total of 100ms -+ * when we don't know if the device is there, and up to 1000ms if -+ * we do know the device is there. -+ */ -+ limit = pcie->suspended ? 1000 : 100; -+ for (i = 1, j = 0; j < limit && !brcm_pcie_link_up(pcie); -+ j += i, i = i * 2) -+ msleep(i + j > limit ? limit - j : i); -+ -+ if (!brcm_pcie_link_up(pcie)) { -+ dev_info(dev, "link down\n"); -+ return -ENODEV; -+ } -+ -+ if (!brcm_pcie_rc_mode(pcie)) { -+ dev_err(dev, "PCIe misconfigured; is in EP mode\n"); -+ return -EINVAL; -+ } -+ -+ for (i = 0; i < pcie->num_out_wins; i++) -+ brcm_pcie_set_outbound_win(pcie, i, pcie->out_wins[i].cpu_addr, -+ pcie->out_wins[i].pcie_addr, -+ pcie->out_wins[i].size); -+ -+ /* -+ * For config space accesses on the RC, show the right class for -+ * a PCIe-PCIe bridge (the default setting is to be EP mode). -+ */ -+ WR_FLD_RB(base, PCIE_RC_CFG_PRIV1_ID_VAL3, CLASS_CODE, 0x060400); -+ -+ if (pcie->ssc) { -+ ret = set_ssc(base); -+ if (ret == 0) -+ ssc_good = true; -+ else -+ dev_err(dev, "failed attempt to enter ssc mode\n"); -+ } -+ -+ lnksta = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA); -+ cls = lnksta & PCI_EXP_LNKSTA_CLS; -+ nlw = (lnksta & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT; -+ dev_info(dev, "link up, %s Gbps x%u %s\n", link_speed_to_str(cls), -+ nlw, ssc_good ? "(SSC)" : "(!SSC)"); -+ -+ /* PCIe->SCB endian mode for BAR */ -+ /* field ENDIAN_MODE_BAR2 = DATA_ENDIAN */ -+ WR_FLD_RB(base, PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1, -+ ENDIAN_MODE_BAR2, DATA_ENDIAN); -+ -+ /* -+ * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1 -+ * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1. -+ */ -+ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, CLKREQ_DEBUG_ENABLE, 1); -+ -+ return 0; -+} -+ -+/* L23 is a low-power PCIe link state */ -+static void enter_l23(struct brcm_pcie *pcie) -+{ -+ void __iomem *base = pcie->base; -+ int tries, l23; -+ -+ /* assert request for L23 */ -+ WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 1); -+ /* poll L23 status */ -+ for (tries = 0, l23 = 0; tries < 1000 && !l23; tries++) -+ l23 = RD_FLD(base, PCIE_MISC_PCIE_STATUS, PCIE_LINK_IN_L23); -+ if (!l23) -+ dev_err(pcie->dev, "failed to enter L23\n"); -+} -+ -+static void turn_off(struct brcm_pcie *pcie) -+{ -+ void __iomem *base = pcie->base; -+ -+ if (brcm_pcie_link_up(pcie)) -+ enter_l23(pcie); -+ /* Assert fundamental reset */ -+ brcm_pcie_perst_set(pcie, 1); -+ /* Deassert request for L23 in case it was asserted */ -+ WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 0); -+ /* Turn off SerDes */ -+ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 1); -+ /* Shutdown PCIe bridge */ -+ brcm_pcie_bridge_sw_init_set(pcie, 1); -+} -+ -+static int brcm_pcie_suspend(struct device *dev) -+{ -+ struct brcm_pcie *pcie = dev_get_drvdata(dev); -+ -+ turn_off(pcie); -+ clk_disable_unprepare(pcie->clk); -+ pcie->suspended = true; -+ -+ return 0; -+} -+ -+static int brcm_pcie_resume(struct device *dev) -+{ -+ struct brcm_pcie *pcie = dev_get_drvdata(dev); -+ void __iomem *base; -+ int ret; -+ -+ base = pcie->base; -+ clk_prepare_enable(pcie->clk); -+ -+ /* Take bridge out of reset so we can access the SerDes reg */ -+ brcm_pcie_bridge_sw_init_set(pcie, 0); -+ -+ /* Turn on SerDes */ -+ WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0); -+ /* Wait for SerDes to be stable */ -+ usleep_range(100, 200); -+ -+ ret = brcm_pcie_setup(pcie); -+ if (ret) -+ return ret; -+ -+ pcie->suspended = false; -+ -+ return 0; -+} -+ -+static void _brcm_pcie_remove(struct brcm_pcie *pcie) -+{ -+ turn_off(pcie); -+ clk_disable_unprepare(pcie->clk); -+ clk_put(pcie->clk); -+ brcm_pcie_remove_controller(pcie); -+} -+ -+static int brcm_pcie_remove(struct platform_device *pdev) -+{ -+ struct brcm_pcie *pcie = platform_get_drvdata(pdev); -+ -+ pci_stop_root_bus(pcie->root_bus); -+ pci_remove_root_bus(pcie->root_bus); -+ _brcm_pcie_remove(pcie); -+ -+ return 0; -+} -+ -+static const struct of_device_id brcm_pcie_match[] = { -+ { .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg }, -+ { .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg }, -+ { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg }, -+ { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, brcm_pcie_match); -+ -+static int brcm_pcie_probe(struct platform_device *pdev) -+{ -+ struct device_node *dn = pdev->dev.of_node; -+ const struct of_device_id *of_id; -+ const struct pcie_cfg_data *data; -+ int ret; -+ struct brcm_pcie *pcie; -+ struct resource *res; -+ void __iomem *base; -+ u32 tmp; -+ struct pci_host_bridge *bridge; -+ struct pci_bus *child; -+ -+ bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); -+ if (!bridge) -+ return -ENOMEM; -+ -+ pcie = pci_host_bridge_priv(bridge); -+ INIT_LIST_HEAD(&pcie->resources); -+ -+ of_id = of_match_node(brcm_pcie_match, dn); -+ if (!of_id) { -+ dev_err(&pdev->dev, "failed to look up compatible string\n"); -+ return -EINVAL; -+ } -+ -+ if (of_property_read_u32(dn, "dma-ranges", &tmp) == 0) { -+ dev_err(&pdev->dev, "cannot yet handle dma-ranges\n"); -+ return -EINVAL; -+ } -+ -+ data = of_id->data; -+ pcie->reg_offsets = data->offsets; -+ pcie->reg_field_info = data->reg_field_info; -+ pcie->type = data->type; -+ pcie->dn = dn; -+ pcie->dev = &pdev->dev; -+ -+ /* We use the domain number as our controller number */ -+ pcie->id = of_get_pci_domain_nr(dn); -+ if (pcie->id < 0) -+ return pcie->id; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) -+ return -EINVAL; -+ -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ pcie->clk = of_clk_get_by_name(dn, "sw_pcie"); -+ if (IS_ERR(pcie->clk)) { -+ dev_err(&pdev->dev, "could not get clock\n"); -+ pcie->clk = NULL; -+ } -+ pcie->base = base; -+ -+ ret = of_pci_get_max_link_speed(dn); -+ pcie->gen = (ret < 0) ? 0 : ret; -+ -+ pcie->ssc = of_property_read_bool(dn, "brcm,enable-ssc"); -+ -+ ret = irq_of_parse_and_map(pdev->dev.of_node, 0); -+ if (ret == 0) -+ /* keep going, as we don't use this intr yet */ -+ dev_warn(pcie->dev, "cannot get PCIe interrupt\n"); -+ else -+ pcie->irq = ret; -+ -+ ret = brcm_pcie_parse_request_of_pci_ranges(pcie); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(pcie->clk); -+ if (ret) { -+ dev_err(&pdev->dev, "could not enable clock\n"); -+ return ret; -+ } -+ -+ ret = brcm_pcie_add_controller(pcie); -+ if (ret) -+ return ret; -+ -+ ret = brcm_pcie_setup(pcie); -+ if (ret) -+ goto fail; -+ -+ list_splice_init(&pcie->resources, &bridge->windows); -+ bridge->dev.parent = &pdev->dev; -+ bridge->busnr = 0; -+ bridge->ops = &brcm_pcie_ops; -+ bridge->sysdata = pcie; -+ bridge->map_irq = of_irq_parse_and_map_pci; -+ bridge->swizzle_irq = pci_common_swizzle; -+ -+ ret = pci_scan_root_bus_bridge(bridge); -+ if (ret < 0) { -+ dev_err(pcie->dev, "Scanning root bridge failed\n"); -+ goto fail; -+ } -+ -+ pci_assign_unassigned_bus_resources(bridge->bus); -+ list_for_each_entry(child, &bridge->bus->children, node) -+ pcie_bus_configure_settings(child); -+ pci_bus_add_devices(bridge->bus); -+ platform_set_drvdata(pdev, pcie); -+ pcie->root_bus = bridge->bus; -+ -+ return 0; -+ -+fail: -+ _brcm_pcie_remove(pcie); -+ return ret; -+} -+ -+static const struct dev_pm_ops brcm_pcie_pm_ops = { -+ .suspend_noirq = brcm_pcie_suspend, -+ .resume_noirq = brcm_pcie_resume, -+}; -+ -+static struct platform_driver brcm_pcie_driver = { -+ .probe = brcm_pcie_probe, -+ .remove = brcm_pcie_remove, -+ .driver = { -+ .name = "brcm-pcie", -+ .owner = THIS_MODULE, -+ .of_match_table = brcm_pcie_match, -+ .pm = &brcm_pcie_pm_ops, -+ }, -+}; -+ -+module_platform_driver(brcm_pcie_driver); -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_DESCRIPTION("Broadcom STB PCIe RC driver"); -+MODULE_AUTHOR("Broadcom"); ---- /dev/null -+++ b/include/soc/brcmstb/memory_api.h -@@ -0,0 +1,25 @@ -+#ifndef __MEMORY_API_H -+#define __MEMORY_API_H -+ -+/* -+ * Bus Interface Unit control register setup, must happen early during boot, -+ * before SMP is brought up, called by machine entry point. -+ */ -+void brcmstb_biuctrl_init(void); -+ -+#ifdef CONFIG_SOC_BRCMSTB -+int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa); -+u64 brcmstb_memory_memc_size(int memc); -+#else -+static inline int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa) -+{ -+ return -EINVAL; -+} -+ -+static inline u64 brcmstb_memory_memc_size(int memc) -+{ -+ return -1; -+} -+#endif -+ -+#endif /* __MEMORY_API_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0527-drm-vc4-Fix-oops-at-boot-with-firmwarekms-on-4.19.patch b/target/linux/brcm2708/patches-4.19/950-0527-drm-vc4-Fix-oops-at-boot-with-firmwarekms-on-4.19.patch new file mode 100644 index 0000000000..aaeeb944fc --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0527-drm-vc4-Fix-oops-at-boot-with-firmwarekms-on-4.19.patch @@ -0,0 +1,22 @@ +From ec551e663ddd1be9140cc23f1eff33b8d270ed60 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 4 Mar 2019 11:59:34 -0800 +Subject: [PATCH] drm/vc4: Fix oops at boot with firmwarekms on 4.19. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_kms.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -107,6 +107,9 @@ vc4_ctm_commit(struct vc4_dev *vc4, stru + struct vc4_ctm_state *ctm_state = to_vc4_ctm_state(vc4->ctm_manager.state); + struct drm_color_ctm *ctm = ctm_state->ctm; + ++ if (vc4->firmware_kms) ++ return; ++ + if (ctm_state->fifo) { + HVS_WRITE(SCALER_OLEDCOEF2, + VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[0]), diff --git a/target/linux/brcm2708/patches-4.19/950-0528-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch b/target/linux/brcm2708/patches-4.19/950-0528-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch deleted file mode 100644 index 804432d48d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0528-PCI-brcmstb-Add-dma-range-mapping-for-inbound-traffi.patch +++ /dev/null @@ -1,569 +0,0 @@ -From d3cc1c713b9436a7dc72788caa1d8de63ac3a01b Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 19 Feb 2019 22:06:59 +0000 -Subject: [PATCH 528/806] PCI: brcmstb: Add dma-range mapping for inbound - traffic - -The Broadcom STB PCIe host controller is intimately related to the -memory subsystem. This close relationship adds complexity to how cpu -system memory is mapped to PCIe memory. Ideally, this mapping is an -identity mapping, or an identity mapping off by a constant. Not so in -this case. - -Consider the Broadcom reference board BCM97445LCC_4X8 which has 6 GB -of system memory. Here is how the PCIe controller maps the -system memory to PCIe memory: - - memc0-a@[ 0....3fffffff] <=> pci@[ 0....3fffffff] - memc0-b@[100000000...13fffffff] <=> pci@[ 40000000....7fffffff] - memc1-a@[ 40000000....7fffffff] <=> pci@[ 80000000....bfffffff] - memc1-b@[300000000...33fffffff] <=> pci@[ c0000000....ffffffff] - memc2-a@[ 80000000....bfffffff] <=> pci@[100000000...13fffffff] - memc2-b@[c00000000...c3fffffff] <=> pci@[140000000...17fffffff] - -Although there are some "gaps" that can be added between the -individual mappings by software, the permutation of memory regions for -the most part is fixed by HW. The solution of having something close -to an identity mapping is not possible. - -The idea behind this HW design is that the same PCIe module can -act as an RC or EP, and if it acts as an EP it concatenates all -of system memory into a BAR so anything can be accessed. Unfortunately, -when the PCIe block is in the role of an RC it also presents this -"BAR" to downstream PCIe devices, rather than offering an identity map -between its system memory and PCIe space. - -Suppose that an endpoint driver allocs some DMA memory. Suppose this -memory is located at 0x6000_0000, which is in the middle of memc1-a. -The driver wants a dma_addr_t value that it can pass on to the EP to -use. Without doing any custom mapping, the EP will use this value for -DMA: the driver will get a dma_addr_t equal to 0x6000_0000. But this -won't work; the device needs a dma_addr_t that reflects the PCIe space -address, namely 0xa000_0000. - -So, essentially the solution to this problem must modify the -dma_addr_t returned by the DMA routines routines. There are two -ways (I know of) of doing this: - -(a) overriding/redefining the dma_to_phys() and phys_to_dma() calls -that are used by the dma_ops routines. This is the approach of - - arch/mips/cavium-octeon/dma-octeon.c - -In ARM and ARM64 these two routines are defiend in asm/dma-mapping.h -as static inline functions. - -(b) Subscribe to a notifier that notifies when a device is added to a -bus. When this happens, set_dma_ops() can be called for the device. -This method is mentioned in: - - http://lxr.free-electrons.com/source/drivers/of/platform.c?v=3.16#L152 - -where it says as a comment - - "In case if platform code need to use own special DMA - configuration, it can use Platform bus notifier and - handle BUS_NOTIFY_ADD_DEVICE event to fix up DMA - configuration." - -Solution (b) is what this commit does. It uses its own set of -dma_ops which are wrappers around the arch_dma_ops. The -wrappers translate the dma addresses before/after invoking -the arch_dma_ops, as appropriate. - -Signed-off-by: Jim Quinlan ---- - drivers/pci/controller/pcie-brcmstb.c | 420 +++++++++++++++++++++++++- - 1 file changed, 411 insertions(+), 9 deletions(-) - ---- a/drivers/pci/controller/pcie-brcmstb.c -+++ b/drivers/pci/controller/pcie-brcmstb.c -@@ -4,6 +4,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -319,11 +320,307 @@ static struct pci_ops brcm_pcie_ops = { - ((val & ~reg##_##field##_MASK) | \ - (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT))) - -+static const struct dma_map_ops *arch_dma_ops; -+static const struct dma_map_ops *brcm_dma_ops_ptr; -+static struct of_pci_range *dma_ranges; -+static int num_dma_ranges; -+ - static phys_addr_t scb_size[BRCM_MAX_SCB]; - static int num_memc; - static int num_pcie; - static DEFINE_MUTEX(brcm_pcie_lock); - -+static dma_addr_t brcm_to_pci(dma_addr_t addr) -+{ -+ struct of_pci_range *p; -+ -+ if (!num_dma_ranges) -+ return addr; -+ -+ for (p = dma_ranges; p < &dma_ranges[num_dma_ranges]; p++) -+ if (addr >= p->cpu_addr && addr < (p->cpu_addr + p->size)) -+ return addr - p->cpu_addr + p->pci_addr; -+ -+ return addr; -+} -+ -+static dma_addr_t brcm_to_cpu(dma_addr_t addr) -+{ -+ struct of_pci_range *p; -+ -+ if (!num_dma_ranges) -+ return addr; -+ -+ for (p = dma_ranges; p < &dma_ranges[num_dma_ranges]; p++) -+ if (addr >= p->pci_addr && addr < (p->pci_addr + p->size)) -+ return addr - p->pci_addr + p->cpu_addr; -+ -+ return addr; -+} -+ -+static void *brcm_alloc(struct device *dev, size_t size, dma_addr_t *handle, -+ gfp_t gfp, unsigned long attrs) -+{ -+ void *ret; -+ -+ ret = arch_dma_ops->alloc(dev, size, handle, gfp, attrs); -+ if (ret) -+ *handle = brcm_to_pci(*handle); -+ return ret; -+} -+ -+static void brcm_free(struct device *dev, size_t size, void *cpu_addr, -+ dma_addr_t handle, unsigned long attrs) -+{ -+ handle = brcm_to_cpu(handle); -+ arch_dma_ops->free(dev, size, cpu_addr, handle, attrs); -+} -+ -+static int brcm_mmap(struct device *dev, struct vm_area_struct *vma, -+ void *cpu_addr, dma_addr_t dma_addr, size_t size, -+ unsigned long attrs) -+{ -+ dma_addr = brcm_to_cpu(dma_addr); -+ return arch_dma_ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs); -+} -+ -+static int brcm_get_sgtable(struct device *dev, struct sg_table *sgt, -+ void *cpu_addr, dma_addr_t handle, size_t size, -+ unsigned long attrs) -+{ -+ handle = brcm_to_cpu(handle); -+ return arch_dma_ops->get_sgtable(dev, sgt, cpu_addr, handle, size, -+ attrs); -+} -+ -+static dma_addr_t brcm_map_page(struct device *dev, struct page *page, -+ unsigned long offset, size_t size, -+ enum dma_data_direction dir, -+ unsigned long attrs) -+{ -+ return brcm_to_pci(arch_dma_ops->map_page(dev, page, offset, size, -+ dir, attrs)); -+} -+ -+static void brcm_unmap_page(struct device *dev, dma_addr_t handle, -+ size_t size, enum dma_data_direction dir, -+ unsigned long attrs) -+{ -+ handle = brcm_to_cpu(handle); -+ arch_dma_ops->unmap_page(dev, handle, size, dir, attrs); -+} -+ -+static int brcm_map_sg(struct device *dev, struct scatterlist *sgl, -+ int nents, enum dma_data_direction dir, -+ unsigned long attrs) -+{ -+ int i, j; -+ struct scatterlist *sg; -+ -+ for_each_sg(sgl, sg, nents, i) { -+#ifdef CONFIG_NEED_SG_DMA_LENGTH -+ sg->dma_length = sg->length; -+#endif -+ sg->dma_address = -+ brcm_dma_ops_ptr->map_page(dev, sg_page(sg), sg->offset, -+ sg->length, dir, attrs); -+ if (dma_mapping_error(dev, sg->dma_address)) -+ goto bad_mapping; -+ } -+ return nents; -+ -+bad_mapping: -+ for_each_sg(sgl, sg, i, j) -+ brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg), -+ sg_dma_len(sg), dir, attrs); -+ return 0; -+} -+ -+static void brcm_unmap_sg(struct device *dev, -+ struct scatterlist *sgl, int nents, -+ enum dma_data_direction dir, -+ unsigned long attrs) -+{ -+ int i; -+ struct scatterlist *sg; -+ -+ for_each_sg(sgl, sg, nents, i) -+ brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg), -+ sg_dma_len(sg), dir, attrs); -+} -+ -+static void brcm_sync_single_for_cpu(struct device *dev, -+ dma_addr_t handle, size_t size, -+ enum dma_data_direction dir) -+{ -+ handle = brcm_to_cpu(handle); -+ arch_dma_ops->sync_single_for_cpu(dev, handle, size, dir); -+} -+ -+static void brcm_sync_single_for_device(struct device *dev, -+ dma_addr_t handle, size_t size, -+ enum dma_data_direction dir) -+{ -+ handle = brcm_to_cpu(handle); -+ arch_dma_ops->sync_single_for_device(dev, handle, size, dir); -+} -+ -+static dma_addr_t brcm_map_resource(struct device *dev, phys_addr_t phys, -+ size_t size, -+ enum dma_data_direction dir, -+ unsigned long attrs) -+{ -+ if (arch_dma_ops->map_resource) -+ return brcm_to_pci(arch_dma_ops->map_resource -+ (dev, phys, size, dir, attrs)); -+ return brcm_to_pci((dma_addr_t)phys); -+} -+ -+static void brcm_unmap_resource(struct device *dev, dma_addr_t handle, -+ size_t size, enum dma_data_direction dir, -+ unsigned long attrs) -+{ -+ if (arch_dma_ops->unmap_resource) -+ arch_dma_ops->unmap_resource(dev, brcm_to_cpu(handle), size, -+ dir, attrs); -+} -+ -+void brcm_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl, -+ int nents, enum dma_data_direction dir) -+{ -+ struct scatterlist *sg; -+ int i; -+ -+ for_each_sg(sgl, sg, nents, i) -+ brcm_dma_ops_ptr->sync_single_for_cpu(dev, sg_dma_address(sg), -+ sg->length, dir); -+} -+ -+void brcm_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, -+ int nents, enum dma_data_direction dir) -+{ -+ struct scatterlist *sg; -+ int i; -+ -+ for_each_sg(sgl, sg, nents, i) -+ brcm_dma_ops_ptr->sync_single_for_device(dev, -+ sg_dma_address(sg), -+ sg->length, dir); -+} -+ -+static int brcm_mapping_error(struct device *dev, dma_addr_t dma_addr) -+{ -+ return arch_dma_ops->mapping_error(dev, dma_addr); -+} -+ -+static int brcm_dma_supported(struct device *dev, u64 mask) -+{ -+ if (num_dma_ranges) { -+ /* -+ * It is our translated addresses that the EP will "see", so -+ * we check all of the ranges for the largest possible value. -+ */ -+ int i; -+ -+ for (i = 0; i < num_dma_ranges; i++) -+ if (dma_ranges[i].pci_addr + dma_ranges[i].size - 1 -+ > mask) -+ return 0; -+ return 1; -+ } -+ -+ return arch_dma_ops->dma_supported(dev, mask); -+} -+ -+#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK -+u64 brcm_get_required_mask)(struct device *dev) -+{ -+ return arch_dma_ops->get_required_mask(dev); -+} -+#endif -+ -+static const struct dma_map_ops brcm_dma_ops = { -+ .alloc = brcm_alloc, -+ .free = brcm_free, -+ .mmap = brcm_mmap, -+ .get_sgtable = brcm_get_sgtable, -+ .map_page = brcm_map_page, -+ .unmap_page = brcm_unmap_page, -+ .map_sg = brcm_map_sg, -+ .unmap_sg = brcm_unmap_sg, -+ .map_resource = brcm_map_resource, -+ .unmap_resource = brcm_unmap_resource, -+ .sync_single_for_cpu = brcm_sync_single_for_cpu, -+ .sync_single_for_device = brcm_sync_single_for_device, -+ .sync_sg_for_cpu = brcm_sync_sg_for_cpu, -+ .sync_sg_for_device = brcm_sync_sg_for_device, -+ .mapping_error = brcm_mapping_error, -+ .dma_supported = brcm_dma_supported, -+#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK -+ .get_required_mask = brcm_get_required_mask, -+#endif -+}; -+ -+static void brcm_set_dma_ops(struct device *dev) -+{ -+ int ret; -+ -+ if (IS_ENABLED(CONFIG_ARM64)) { -+ /* -+ * We are going to invoke get_dma_ops(). That -+ * function, at this point in time, invokes -+ * get_arch_dma_ops(), and for ARM64 that function -+ * returns a pointer to dummy_dma_ops. So then we'd -+ * like to call arch_setup_dma_ops(), but that isn't -+ * exported. Instead, we call of_dma_configure(), -+ * which is exported, and this calls -+ * arch_setup_dma_ops(). Once we do this the call to -+ * get_dma_ops() will work properly because -+ * dev->dma_ops will be set. -+ */ -+ ret = of_dma_configure(dev, dev->of_node, true); -+ if (ret) { -+ dev_err(dev, "of_dma_configure() failed: %d\n", ret); -+ return; -+ } -+ } -+ -+ arch_dma_ops = get_dma_ops(dev); -+ if (!arch_dma_ops) { -+ dev_err(dev, "failed to get arch_dma_ops\n"); -+ return; -+ } -+ -+ set_dma_ops(dev, &brcm_dma_ops); -+} -+ -+static int brcmstb_platform_notifier(struct notifier_block *nb, -+ unsigned long event, void *__dev) -+{ -+ struct device *dev = __dev; -+ -+ brcm_dma_ops_ptr = &brcm_dma_ops; -+ if (event != BUS_NOTIFY_ADD_DEVICE) -+ return NOTIFY_DONE; -+ -+ brcm_set_dma_ops(dev); -+ return NOTIFY_OK; -+} -+ -+static struct notifier_block brcmstb_platform_nb = { -+ .notifier_call = brcmstb_platform_notifier, -+}; -+ -+static int brcm_register_notifier(void) -+{ -+ return bus_register_notifier(&pci_bus_type, &brcmstb_platform_nb); -+} -+ -+static int brcm_unregister_notifier(void) -+{ -+ return bus_unregister_notifier(&pci_bus_type, &brcmstb_platform_nb); -+} -+ - static u32 rd_fld(void __iomem *p, u32 mask, int shift) - { - return (bcm_readl(p) & mask) >> shift; -@@ -597,9 +894,71 @@ static inline void brcm_pcie_perst_set(s - WR_FLD_RB(pcie->base, PCIE_MISC_PCIE_CTRL, PCIE_PERSTB, !val); - } - -+static int pci_dma_range_parser_init(struct of_pci_range_parser *parser, -+ struct device_node *node) -+{ -+ const int na = 3, ns = 2; -+ int rlen; -+ -+ parser->node = node; -+ parser->pna = of_n_addr_cells(node); -+ parser->np = parser->pna + na + ns; -+ -+ parser->range = of_get_property(node, "dma-ranges", &rlen); -+ if (!parser->range) -+ return -ENOENT; -+ -+ parser->end = parser->range + rlen / sizeof(__be32); -+ -+ return 0; -+} -+ -+static int brcm_pcie_parse_map_dma_ranges(struct brcm_pcie *pcie) -+{ -+ int i; -+ struct of_pci_range_parser parser; -+ struct device_node *dn = pcie->dn; -+ -+ /* -+ * Parse dma-ranges property if present. If there are multiple -+ * PCIe controllers, we only have to parse from one of them since -+ * the others will have an identical mapping. -+ */ -+ if (!pci_dma_range_parser_init(&parser, dn)) { -+ unsigned int max_ranges -+ = (parser.end - parser.range) / parser.np; -+ -+ dma_ranges = kcalloc(max_ranges, sizeof(struct of_pci_range), -+ GFP_KERNEL); -+ if (!dma_ranges) -+ return -ENOMEM; -+ -+ for (i = 0; of_pci_range_parser_one(&parser, dma_ranges + i); -+ i++) -+ num_dma_ranges++; -+ } -+ -+ for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { -+ u64 size = brcmstb_memory_memc_size(i); -+ -+ if (size == (u64)-1) { -+ dev_err(pcie->dev, "cannot get memc%d size", i); -+ return -EINVAL; -+ } else if (size) { -+ scb_size[i] = roundup_pow_of_two_64(size); -+ num_memc++; -+ } else { -+ break; -+ } -+ } -+ -+ return 0; -+} -+ - static int brcm_pcie_add_controller(struct brcm_pcie *pcie) - { - int i, ret = 0; -+ struct device *dev = pcie->dev; - - mutex_lock(&brcm_pcie_lock); - if (num_pcie > 0) { -@@ -607,12 +966,21 @@ static int brcm_pcie_add_controller(stru - goto done; - } - -+ ret = brcm_register_notifier(); -+ if (ret) { -+ dev_err(dev, "failed to register pci bus notifier\n"); -+ goto done; -+ } -+ ret = brcm_pcie_parse_map_dma_ranges(pcie); -+ if (ret) -+ goto done; -+ - /* Determine num_memc and their sizes */ - for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { - u64 size = brcmstb_memory_memc_size(i); - - if (size == (u64)-1) { -- dev_err(pcie->dev, "cannot get memc%d size\n", i); -+ dev_err(dev, "cannot get memc%d size\n", i); - ret = -EINVAL; - goto done; - } else if (size) { -@@ -636,8 +1004,16 @@ done: - static void brcm_pcie_remove_controller(struct brcm_pcie *pcie) - { - mutex_lock(&brcm_pcie_lock); -- if (--num_pcie == 0) -- num_memc = 0; -+ if (--num_pcie > 0) -+ goto out; -+ -+ if (brcm_unregister_notifier()) -+ dev_err(pcie->dev, "failed to unregister pci bus notifier\n"); -+ kfree(dma_ranges); -+ dma_ranges = NULL; -+ num_dma_ranges = 0; -+ num_memc = 0; -+out: - mutex_unlock(&brcm_pcie_lock); - } - -@@ -757,6 +1133,38 @@ static int brcm_pcie_setup(struct brcm_p - */ - rc_bar2_offset = 0; - -+ if (dma_ranges) { -+ /* -+ * The best-case scenario is to place the inbound -+ * region in the first 4GB of pci-space, as some -+ * legacy devices can only address 32bits. -+ * We would also like to put the MSI under 4GB -+ * as well, since some devices require a 32bit -+ * MSI target address. -+ */ -+ if (total_mem_size <= 0xc0000000ULL && -+ rc_bar2_size <= 0x100000000ULL) { -+ rc_bar2_offset = 0; -+ } else { -+ /* -+ * The system memory is 4GB or larger so we -+ * cannot start the inbound region at location -+ * 0 (since we have to allow some space for -+ * outbound memory @ 3GB). So instead we -+ * start it at the 1x multiple of its size -+ */ -+ rc_bar2_offset = rc_bar2_size; -+ } -+ -+ } else { -+ /* -+ * Set simple configuration based on memory sizes -+ * only. We always start the viewport at address 0, -+ * and set the MSI target address accordingly. -+ */ -+ rc_bar2_offset = 0; -+ } -+ - tmp = lower_32_bits(rc_bar2_offset); - tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE, - encode_ibar_size(rc_bar2_size)); -@@ -967,7 +1375,6 @@ static int brcm_pcie_probe(struct platfo - struct brcm_pcie *pcie; - struct resource *res; - void __iomem *base; -- u32 tmp; - struct pci_host_bridge *bridge; - struct pci_bus *child; - -@@ -984,11 +1391,6 @@ static int brcm_pcie_probe(struct platfo - return -EINVAL; - } - -- if (of_property_read_u32(dn, "dma-ranges", &tmp) == 0) { -- dev_err(&pdev->dev, "cannot yet handle dma-ranges\n"); -- return -EINVAL; -- } -- - data = of_id->data; - pcie->reg_offsets = data->offsets; - pcie->reg_field_info = data->reg_field_info; diff --git a/target/linux/brcm2708/patches-4.19/950-0528-drm-vc4-Disable-V3D-interactions-if-the-v3d-componen.patch b/target/linux/brcm2708/patches-4.19/950-0528-drm-vc4-Disable-V3D-interactions-if-the-v3d-componen.patch new file mode 100644 index 0000000000..2adc642492 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0528-drm-vc4-Disable-V3D-interactions-if-the-v3d-componen.patch @@ -0,0 +1,167 @@ +From f69f2b1354e0a548d2cb6dfdc07d37efb426eee0 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 20 Feb 2019 13:03:41 -0800 +Subject: [PATCH] drm/vc4: Disable V3D interactions if the v3d + component didn't probe. + +One might want to use the VC4 display stack without using Mesa. +Similar to the debugfs fixes for not having all of the possible +display bits enabled, make sure you can't oops in vc4 if v3d isn't +enabled. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_drv.c | 11 +++++++++++ + drivers/gpu/drm/vc4/vc4_gem.c | 10 ++++++++++ + drivers/gpu/drm/vc4/vc4_irq.c | 9 +++++++++ + drivers/gpu/drm/vc4/vc4_perfmon.c | 18 ++++++++++++++++++ + 4 files changed, 48 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -71,6 +71,9 @@ static int vc4_get_param_ioctl(struct dr + if (args->pad != 0) + return -EINVAL; + ++ if (!vc4->v3d) ++ return -EINVAL; ++ + switch (args->param) { + case DRM_VC4_PARAM_V3D_IDENT0: + ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); +@@ -271,6 +274,7 @@ static int vc4_drm_bind(struct device *d + struct platform_device *pdev = to_platform_device(dev); + struct drm_device *drm; + struct vc4_dev *vc4; ++ struct device_node *node; + int ret = 0; + + dev->coherent_dma_mask = DMA_BIT_MASK(32); +@@ -279,6 +283,13 @@ static int vc4_drm_bind(struct device *d + if (!vc4) + return -ENOMEM; + ++ /* If VC4 V3D is missing, don't advertise render nodes. */ ++ node = of_find_compatible_node(NULL, NULL, "brcm,bcm2835-v3d"); ++ if (node) ++ of_node_put(node); ++ else ++ vc4_drm_driver.driver_features &= ~DRIVER_RENDER; ++ + drm = drm_dev_alloc(&vc4_drm_driver, dev); + if (IS_ERR(drm)) + return PTR_ERR(drm); +--- a/drivers/gpu/drm/vc4/vc4_gem.c ++++ b/drivers/gpu/drm/vc4/vc4_gem.c +@@ -74,6 +74,11 @@ vc4_get_hang_state_ioctl(struct drm_devi + u32 i; + int ret = 0; + ++ if (!vc4->v3d) { ++ DRM_DEBUG("VC4_GET_HANG_STATE with no VC4 V3D probed\n"); ++ return -EINVAL; ++ } ++ + spin_lock_irqsave(&vc4->job_lock, irqflags); + kernel_state = vc4->hang_state; + if (!kernel_state) { +@@ -1124,6 +1129,11 @@ vc4_submit_cl_ioctl(struct drm_device *d + struct dma_fence *in_fence; + int ret = 0; + ++ if (!vc4->v3d) { ++ DRM_DEBUG("VC4_SUBMIT_CL with no VC4 V3D probed\n"); ++ return -EINVAL; ++ } ++ + if ((args->flags & ~(VC4_SUBMIT_CL_USE_CLEAR_COLOR | + VC4_SUBMIT_CL_FIXED_RCL_ORDER | + VC4_SUBMIT_CL_RCL_ORDER_INCREASING_X | +--- a/drivers/gpu/drm/vc4/vc4_irq.c ++++ b/drivers/gpu/drm/vc4/vc4_irq.c +@@ -229,6 +229,9 @@ vc4_irq_preinstall(struct drm_device *de + { + struct vc4_dev *vc4 = to_vc4_dev(dev); + ++ if (!vc4->v3d) ++ return; ++ + init_waitqueue_head(&vc4->job_wait_queue); + INIT_WORK(&vc4->overflow_mem_work, vc4_overflow_mem_work); + +@@ -243,6 +246,9 @@ vc4_irq_postinstall(struct drm_device *d + { + struct vc4_dev *vc4 = to_vc4_dev(dev); + ++ if (!vc4->v3d) ++ return 0; ++ + /* Enable both the render done and out of memory interrupts. */ + V3D_WRITE(V3D_INTENA, V3D_DRIVER_IRQS); + +@@ -254,6 +260,9 @@ vc4_irq_uninstall(struct drm_device *dev + { + struct vc4_dev *vc4 = to_vc4_dev(dev); + ++ if (!vc4->v3d) ++ return; ++ + /* Disable sending interrupts for our driver's IRQs. */ + V3D_WRITE(V3D_INTDIS, V3D_DRIVER_IRQS); + +--- a/drivers/gpu/drm/vc4/vc4_perfmon.c ++++ b/drivers/gpu/drm/vc4/vc4_perfmon.c +@@ -100,12 +100,18 @@ void vc4_perfmon_close_file(struct vc4_f + int vc4_perfmon_create_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) + { ++ struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_file *vc4file = file_priv->driver_priv; + struct drm_vc4_perfmon_create *req = data; + struct vc4_perfmon *perfmon; + unsigned int i; + int ret; + ++ if (!vc4->v3d) { ++ DRM_DEBUG("Creating perfmon no VC4 V3D probed\n"); ++ return -EINVAL; ++ } ++ + /* Number of monitored counters cannot exceed HW limits. */ + if (req->ncounters > DRM_VC4_MAX_PERF_COUNTERS || + !req->ncounters) +@@ -146,10 +152,16 @@ int vc4_perfmon_create_ioctl(struct drm_ + int vc4_perfmon_destroy_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) + { ++ struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_file *vc4file = file_priv->driver_priv; + struct drm_vc4_perfmon_destroy *req = data; + struct vc4_perfmon *perfmon; + ++ if (!vc4->v3d) { ++ DRM_DEBUG("Destroying perfmon no VC4 V3D probed\n"); ++ return -EINVAL; ++ } ++ + mutex_lock(&vc4file->perfmon.lock); + perfmon = idr_remove(&vc4file->perfmon.idr, req->id); + mutex_unlock(&vc4file->perfmon.lock); +@@ -164,11 +176,17 @@ int vc4_perfmon_destroy_ioctl(struct drm + int vc4_perfmon_get_values_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) + { ++ struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_file *vc4file = file_priv->driver_priv; + struct drm_vc4_perfmon_get_values *req = data; + struct vc4_perfmon *perfmon; + int ret; + ++ if (!vc4->v3d) { ++ DRM_DEBUG("Getting perfmon no VC4 V3D probed\n"); ++ return -EINVAL; ++ } ++ + mutex_lock(&vc4file->perfmon.lock); + perfmon = idr_find(&vc4file->perfmon.idr, req->id); + vc4_perfmon_get(perfmon); diff --git a/target/linux/brcm2708/patches-4.19/950-0529-PCI-brcmstb-Add-MSI-capability.patch b/target/linux/brcm2708/patches-4.19/950-0529-PCI-brcmstb-Add-MSI-capability.patch deleted file mode 100644 index b8b61aa614..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0529-PCI-brcmstb-Add-MSI-capability.patch +++ /dev/null @@ -1,543 +0,0 @@ -From cd3af4fa73ab25353f0865ebe8e0d2af1fd2a50b Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 19 Feb 2019 22:06:59 +0000 -Subject: [PATCH 529/806] PCI: brcmstb: Add MSI capability - -This commit adds MSI to the Broadcom STB PCIe host controller. It does -not add MSIX since that functionality is not in the HW. The MSI -controller is physically located within the PCIe block, however, there -is no reason why the MSI controller could not be moved elsewhere in -the future. - -Since the internal Brcmstb MSI controller is intertwined with the PCIe -controller, it is not its own platform device but rather part of the -PCIe platform device. - -Signed-off-by: Jim Quinlan ---- - drivers/pci/controller/pcie-brcmstb.c | 374 ++++++++++++++++++++++++-- - 1 file changed, 353 insertions(+), 21 deletions(-) - ---- a/drivers/pci/controller/pcie-brcmstb.c -+++ b/drivers/pci/controller/pcie-brcmstb.c -@@ -1,6 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0 - /* Copyright (C) 2009 - 2017 Broadcom */ - -+#include - #include - #include - #include -@@ -9,11 +10,13 @@ - #include - #include - #include -+#include - #include - #include - #include - #include - #include -+#include - #include - #include - #include -@@ -47,6 +50,9 @@ - #define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 - #define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 - #define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c -+#define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044 -+#define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048 -+#define PCIE_MISC_MSI_DATA_CONFIG 0x404c - #define PCIE_MISC_PCIE_CTRL 0x4064 - #define PCIE_MISC_PCIE_STATUS 0x4068 - #define PCIE_MISC_REVISION 0x406c -@@ -55,6 +61,7 @@ - #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 - #define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 - #define PCIE_INTR2_CPU_BASE 0x4300 -+#define PCIE_MSI_INTR2_BASE 0x4500 - - /* - * Broadcom Settop Box PCIe Register Field shift and mask info. The -@@ -115,6 +122,8 @@ - - #define BRCM_NUM_PCIE_OUT_WINS 0x4 - #define BRCM_MAX_SCB 0x4 -+#define BRCM_INT_PCI_MSI_NR 32 -+#define BRCM_PCIE_HW_REV_33 0x0303 - - #define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL - #define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL -@@ -203,6 +212,33 @@ struct brcm_window { - dma_addr_t size; - }; - -+struct brcm_msi { -+ struct device *dev; -+ void __iomem *base; -+ struct device_node *dn; -+ struct irq_domain *msi_domain; -+ struct irq_domain *inner_domain; -+ struct mutex lock; /* guards the alloc/free operations */ -+ u64 target_addr; -+ int irq; -+ -+ /* intr_base is the base pointer for interrupt status/set/clr regs */ -+ void __iomem *intr_base; -+ -+ /* intr_legacy_mask indicates how many bits are MSI interrupts */ -+ u32 intr_legacy_mask; -+ -+ /* -+ * intr_legacy_offset indicates bit position of MSI_01. It is -+ * to map the register bit position to a hwirq that starts at 0. -+ */ -+ u32 intr_legacy_offset; -+ -+ /* used indicates which MSI interrupts have been alloc'd */ -+ unsigned long used; -+ unsigned int rev; -+}; -+ - /* Internal PCIe Host Controller Information.*/ - struct brcm_pcie { - struct device *dev; -@@ -217,7 +253,10 @@ struct brcm_pcie { - int num_out_wins; - bool ssc; - int gen; -+ u64 msi_target_addr; - struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS]; -+ struct brcm_msi *msi; -+ bool msi_internal; - unsigned int rev; - const int *reg_offsets; - const int *reg_field_info; -@@ -225,9 +264,9 @@ struct brcm_pcie { - }; - - struct pcie_cfg_data { -- const int *reg_field_info; -- const int *offsets; -- const enum pcie_type type; -+ const int *reg_field_info; -+ const int *offsets; -+ const enum pcie_type type; - }; - - static const int pcie_reg_field_info[] = { -@@ -828,6 +867,267 @@ static void brcm_pcie_set_outbound_win(s - } - } - -+static struct irq_chip brcm_msi_irq_chip = { -+ .name = "Brcm_MSI", -+ .irq_mask = pci_msi_mask_irq, -+ .irq_unmask = pci_msi_unmask_irq, -+}; -+ -+static struct msi_domain_info brcm_msi_domain_info = { -+ .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | -+ MSI_FLAG_PCI_MSIX), -+ .chip = &brcm_msi_irq_chip, -+}; -+ -+static void brcm_pcie_msi_isr(struct irq_desc *desc) -+{ -+ struct irq_chip *chip = irq_desc_get_chip(desc); -+ struct brcm_msi *msi; -+ unsigned long status, virq; -+ u32 mask, bit, hwirq; -+ struct device *dev; -+ -+ chained_irq_enter(chip, desc); -+ msi = irq_desc_get_handler_data(desc); -+ mask = msi->intr_legacy_mask; -+ dev = msi->dev; -+ -+ while ((status = bcm_readl(msi->intr_base + STATUS) & mask)) { -+ for_each_set_bit(bit, &status, BRCM_INT_PCI_MSI_NR) { -+ /* clear the interrupt */ -+ bcm_writel(1 << bit, msi->intr_base + CLR); -+ -+ /* Account for legacy interrupt offset */ -+ hwirq = bit - msi->intr_legacy_offset; -+ -+ virq = irq_find_mapping(msi->inner_domain, hwirq); -+ if (virq) { -+ if (msi->used & (1 << hwirq)) -+ generic_handle_irq(virq); -+ else -+ dev_info(dev, "unhandled MSI %d\n", -+ hwirq); -+ } else { -+ /* Unknown MSI, just clear it */ -+ dev_dbg(dev, "unexpected MSI\n"); -+ } -+ } -+ } -+ chained_irq_exit(chip, desc); -+} -+ -+static void brcm_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) -+{ -+ struct brcm_msi *msi = irq_data_get_irq_chip_data(data); -+ u32 temp; -+ -+ msg->address_lo = lower_32_bits(msi->target_addr); -+ msg->address_hi = upper_32_bits(msi->target_addr); -+ temp = bcm_readl(msi->base + PCIE_MISC_MSI_DATA_CONFIG); -+ msg->data = ((temp >> 16) & (temp & 0xffff)) | data->hwirq; -+} -+ -+static int brcm_msi_set_affinity(struct irq_data *irq_data, -+ const struct cpumask *mask, bool force) -+{ -+ return -EINVAL; -+} -+ -+static struct irq_chip brcm_msi_bottom_irq_chip = { -+ .name = "Brcm_MSI", -+ .irq_compose_msi_msg = brcm_compose_msi_msg, -+ .irq_set_affinity = brcm_msi_set_affinity, -+}; -+ -+static int brcm_msi_alloc(struct brcm_msi *msi) -+{ -+ int bit, hwirq; -+ -+ mutex_lock(&msi->lock); -+ bit = ~msi->used ? ffz(msi->used) : -1; -+ -+ if (bit >= 0 && bit < BRCM_INT_PCI_MSI_NR) { -+ msi->used |= (1 << bit); -+ hwirq = bit - msi->intr_legacy_offset; -+ } else { -+ hwirq = -ENOSPC; -+ } -+ -+ mutex_unlock(&msi->lock); -+ return hwirq; -+} -+ -+static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq) -+{ -+ mutex_lock(&msi->lock); -+ msi->used &= ~(1 << (hwirq + msi->intr_legacy_offset)); -+ mutex_unlock(&msi->lock); -+} -+ -+static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, -+ unsigned int nr_irqs, void *args) -+{ -+ struct brcm_msi *msi = domain->host_data; -+ int hwirq; -+ -+ hwirq = brcm_msi_alloc(msi); -+ -+ if (hwirq < 0) -+ return hwirq; -+ -+ irq_domain_set_info(domain, virq, (irq_hw_number_t)hwirq, -+ &brcm_msi_bottom_irq_chip, domain->host_data, -+ handle_simple_irq, NULL, NULL); -+ return 0; -+} -+ -+static void brcm_irq_domain_free(struct irq_domain *domain, -+ unsigned int virq, unsigned int nr_irqs) -+{ -+ struct irq_data *d = irq_domain_get_irq_data(domain, virq); -+ struct brcm_msi *msi = irq_data_get_irq_chip_data(d); -+ -+ brcm_msi_free(msi, d->hwirq); -+} -+ -+static void brcm_msi_set_regs(struct brcm_msi *msi) -+{ -+ u32 data_val, msi_lo, msi_hi; -+ -+ if (msi->rev >= BRCM_PCIE_HW_REV_33) { -+ /* -+ * ffe0 -- least sig 5 bits are 0 indicating 32 msgs -+ * 6540 -- this is our arbitrary unique data value -+ */ -+ data_val = 0xffe06540; -+ } else { -+ /* -+ * fff8 -- least sig 3 bits are 0 indicating 8 msgs -+ * 6540 -- this is our arbitrary unique data value -+ */ -+ data_val = 0xfff86540; -+ } -+ -+ /* -+ * Make sure we are not masking MSIs. Note that MSIs can be masked, -+ * but that occurs on the PCIe EP device -+ */ -+ bcm_writel(0xffffffff & msi->intr_legacy_mask, -+ msi->intr_base + MASK_CLR); -+ -+ msi_lo = lower_32_bits(msi->target_addr); -+ msi_hi = upper_32_bits(msi->target_addr); -+ /* -+ * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI -+ * enable, which we set to 1. -+ */ -+ bcm_writel(msi_lo | 1, msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO); -+ bcm_writel(msi_hi, msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI); -+ bcm_writel(data_val, msi->base + PCIE_MISC_MSI_DATA_CONFIG); -+} -+ -+static const struct irq_domain_ops msi_domain_ops = { -+ .alloc = brcm_irq_domain_alloc, -+ .free = brcm_irq_domain_free, -+}; -+ -+static int brcm_allocate_domains(struct brcm_msi *msi) -+{ -+ struct fwnode_handle *fwnode = of_node_to_fwnode(msi->dn); -+ struct device *dev = msi->dev; -+ -+ msi->inner_domain = irq_domain_add_linear(NULL, BRCM_INT_PCI_MSI_NR, -+ &msi_domain_ops, msi); -+ if (!msi->inner_domain) { -+ dev_err(dev, "failed to create IRQ domain\n"); -+ return -ENOMEM; -+ } -+ -+ msi->msi_domain = pci_msi_create_irq_domain(fwnode, -+ &brcm_msi_domain_info, -+ msi->inner_domain); -+ if (!msi->msi_domain) { -+ dev_err(dev, "failed to create MSI domain\n"); -+ irq_domain_remove(msi->inner_domain); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+static void brcm_free_domains(struct brcm_msi *msi) -+{ -+ irq_domain_remove(msi->msi_domain); -+ irq_domain_remove(msi->inner_domain); -+} -+ -+static void brcm_msi_remove(struct brcm_pcie *pcie) -+{ -+ struct brcm_msi *msi = pcie->msi; -+ -+ if (!msi) -+ return; -+ irq_set_chained_handler(msi->irq, NULL); -+ irq_set_handler_data(msi->irq, NULL); -+ brcm_free_domains(msi); -+} -+ -+static int brcm_pcie_enable_msi(struct brcm_pcie *pcie) -+{ -+ struct brcm_msi *msi; -+ int irq, ret; -+ struct device *dev = pcie->dev; -+ -+ irq = irq_of_parse_and_map(dev->of_node, 1); -+ if (irq <= 0) { -+ dev_err(dev, "cannot map msi intr\n"); -+ return -ENODEV; -+ } -+ -+ msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL); -+ if (!msi) -+ return -ENOMEM; -+ -+ msi->dev = dev; -+ msi->base = pcie->base; -+ msi->rev = pcie->rev; -+ msi->dn = pcie->dn; -+ msi->target_addr = pcie->msi_target_addr; -+ msi->irq = irq; -+ -+ ret = brcm_allocate_domains(msi); -+ if (ret) -+ return ret; -+ -+ irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi); -+ -+ if (msi->rev >= BRCM_PCIE_HW_REV_33) { -+ msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE; -+ /* -+ * This version of PCIe hw has only 32 intr bits -+ * starting at bit position 0. -+ */ -+ msi->intr_legacy_mask = 0xffffffff; -+ msi->intr_legacy_offset = 0x0; -+ msi->used = 0x0; -+ -+ } else { -+ msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE; -+ /* -+ * This version of PCIe hw has only 8 intr bits starting -+ * at bit position 24. -+ */ -+ msi->intr_legacy_mask = 0xff000000; -+ msi->intr_legacy_offset = 24; -+ msi->used = 0x00ffffff; -+ } -+ -+ brcm_msi_set_regs(msi); -+ pcie->msi = msi; -+ -+ return 0; -+} -+ - /* Configuration space read/write support */ - static int cfg_index(int busnr, int devfn, int reg) - { -@@ -1072,6 +1372,7 @@ static int brcm_pcie_setup(struct brcm_p - u16 nlw, cls, lnksta; - bool ssc_good = false; - struct device *dev = pcie->dev; -+ u64 msi_target_addr; - - /* Reset the bridge */ - brcm_pcie_bridge_sw_init_set(pcie, 1); -@@ -1116,27 +1417,24 @@ static int brcm_pcie_setup(struct brcm_p - * The PCIe host controller by design must set the inbound - * viewport to be a contiguous arrangement of all of the - * system's memory. In addition, its size mut be a power of -- * two. To further complicate matters, the viewport must -- * start on a pcie-address that is aligned on a multiple of its -- * size. If a portion of the viewport does not represent -- * system memory -- e.g. 3GB of memory requires a 4GB viewport -- * -- we can map the outbound memory in or after 3GB and even -- * though the viewport will overlap the outbound memory the -- * controller will know to send outbound memory downstream and -- * everything else upstream. -+ * two. Further, the MSI target address must NOT be placed -+ * inside this region, as the decoding logic will consider its -+ * address to be inbound memory traffic. To further -+ * complicate matters, the viewport must start on a -+ * pcie-address that is aligned on a multiple of its size. -+ * If a portion of the viewport does not represent system -+ * memory -- e.g. 3GB of memory requires a 4GB viewport -- -+ * we can map the outbound memory in or after 3GB and even -+ * though the viewport will overlap the outbound memory -+ * the controller will know to send outbound memory downstream -+ * and everything else upstream. - */ - rc_bar2_size = roundup_pow_of_two_64(total_mem_size); - -- /* -- * Set simple configuration based on memory sizes -- * only. We always start the viewport at address 0. -- */ -- rc_bar2_offset = 0; -- - if (dma_ranges) { - /* - * The best-case scenario is to place the inbound -- * region in the first 4GB of pci-space, as some -+ * region in the first 4GB of pcie-space, as some - * legacy devices can only address 32bits. - * We would also like to put the MSI under 4GB - * as well, since some devices require a 32bit -@@ -1145,6 +1443,14 @@ static int brcm_pcie_setup(struct brcm_p - if (total_mem_size <= 0xc0000000ULL && - rc_bar2_size <= 0x100000000ULL) { - rc_bar2_offset = 0; -+ /* If the viewport is less then 4GB we can fit -+ * the MSI target address under 4GB. Otherwise -+ * put it right below 64GB. -+ */ -+ msi_target_addr = -+ (rc_bar2_size == 0x100000000ULL) -+ ? BRCM_MSI_TARGET_ADDR_GT_4GB -+ : BRCM_MSI_TARGET_ADDR_LT_4GB; - } else { - /* - * The system memory is 4GB or larger so we -@@ -1154,8 +1460,12 @@ static int brcm_pcie_setup(struct brcm_p - * start it at the 1x multiple of its size - */ - rc_bar2_offset = rc_bar2_size; -- } - -+ /* Since we are starting the viewport at 4GB or -+ * higher, put the MSI target address below 4GB -+ */ -+ msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; -+ } - } else { - /* - * Set simple configuration based on memory sizes -@@ -1163,7 +1473,12 @@ static int brcm_pcie_setup(struct brcm_p - * and set the MSI target address accordingly. - */ - rc_bar2_offset = 0; -+ -+ msi_target_addr = (rc_bar2_size >= 0x100000000ULL) -+ ? BRCM_MSI_TARGET_ADDR_GT_4GB -+ : BRCM_MSI_TARGET_ADDR_LT_4GB; - } -+ pcie->msi_target_addr = msi_target_addr; - - tmp = lower_32_bits(rc_bar2_offset); - tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE, -@@ -1333,6 +1648,9 @@ static int brcm_pcie_resume(struct devic - if (ret) - return ret; - -+ if (pcie->msi && pcie->msi_internal) -+ brcm_msi_set_regs(pcie->msi); -+ - pcie->suspended = false; - - return 0; -@@ -1340,6 +1658,7 @@ static int brcm_pcie_resume(struct devic - - static void _brcm_pcie_remove(struct brcm_pcie *pcie) - { -+ brcm_msi_remove(pcie); - turn_off(pcie); - clk_disable_unprepare(pcie->clk); - clk_put(pcie->clk); -@@ -1368,7 +1687,7 @@ MODULE_DEVICE_TABLE(of, brcm_pcie_match) - - static int brcm_pcie_probe(struct platform_device *pdev) - { -- struct device_node *dn = pdev->dev.of_node; -+ struct device_node *dn = pdev->dev.of_node, *msi_dn; - const struct of_device_id *of_id; - const struct pcie_cfg_data *data; - int ret; -@@ -1448,6 +1767,20 @@ static int brcm_pcie_probe(struct platfo - if (ret) - goto fail; - -+ msi_dn = of_parse_phandle(pcie->dn, "msi-parent", 0); -+ /* Use the internal MSI if no msi-parent property */ -+ if (!msi_dn) -+ msi_dn = pcie->dn; -+ -+ if (pci_msi_enabled() && msi_dn == pcie->dn) { -+ ret = brcm_pcie_enable_msi(pcie); -+ if (ret) -+ dev_err(pcie->dev, -+ "probe of internal MSI failed: %d)", ret); -+ else -+ pcie->msi_internal = true; -+ } -+ - list_splice_init(&pcie->resources, &bridge->windows); - bridge->dev.parent = &pdev->dev; - bridge->busnr = 0; -@@ -1470,7 +1803,6 @@ static int brcm_pcie_probe(struct platfo - pcie->root_bus = bridge->bus; - - return 0; -- - fail: - _brcm_pcie_remove(pcie); - return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0529-drm-v3d-Add-support-for-V3D-v4.2.patch b/target/linux/brcm2708/patches-4.19/950-0529-drm-v3d-Add-support-for-V3D-v4.2.patch new file mode 100644 index 0000000000..35fc072d8a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0529-drm-v3d-Add-support-for-V3D-v4.2.patch @@ -0,0 +1,207 @@ +From b0e7b8814e74be0559e07f737ef18cc3709d4ac4 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 4 Oct 2018 17:22:43 -0700 +Subject: [PATCH] drm/v3d: Add support for V3D v4.2. + +No compatible string for it yet, just the version-dependent changes. +They've now tied the hub and the core interrupt lines into a single +interrupt line coming out of the block. It also turns out I made a +mistake in modeling the V3D v3.3 and v4.1 bridge as a part of V3D +itself -- the bridge is going away in favor of an external reset +controller in a larger HW module. + +v2: Use consistent checks for whether we're on 4.2, and fix a leak in + an error path. +v3: Use more general means of determining if the current 4.2 changes + are in place, as apparently other platforms may switch back (noted + by Dave). Update the binding doc. + +Signed-off-by: Eric Anholt +--- + .../devicetree/bindings/gpu/brcm,bcm-v3d.txt | 11 ++++-- + drivers/gpu/drm/v3d/v3d_drv.c | 21 +++++++++--- + drivers/gpu/drm/v3d/v3d_drv.h | 2 ++ + drivers/gpu/drm/v3d/v3d_gem.c | 12 ++++++- + drivers/gpu/drm/v3d/v3d_irq.c | 34 ++++++++++++++----- + 5 files changed, 63 insertions(+), 17 deletions(-) + +--- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt ++++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt +@@ -6,15 +6,20 @@ For V3D 2.x, see brcm,bcm-vc4.txt. + Required properties: + - compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d" + - reg: Physical base addresses and lengths of the register areas +-- reg-names: Names for the register areas. The "hub", "bridge", and "core0" ++- reg-names: Names for the register areas. The "hub" and "core0" + register areas are always required. The "gca" register area +- is required if the GCA cache controller is present. ++ is required if the GCA cache controller is present. The ++ "bridge" register area is required if an external reset ++ controller is not present. + - interrupts: The interrupt numbers. The first interrupt is for the hub, +- while the following interrupts are for the cores. ++ while the following interrupts are separate interrupt lines ++ for the cores (if they don't share the hub's interrupt). + See bindings/interrupt-controller/interrupts.txt + + Optional properties: + - clocks: The core clock the unit runs on ++- resets: The reset line for v3d, if not using a mapping of the bridge ++ See bindings/reset/reset.txt + + v3d { + compatible = "brcm,7268-v3d"; +--- a/drivers/gpu/drm/v3d/v3d_drv.c ++++ b/drivers/gpu/drm/v3d/v3d_drv.c +@@ -19,6 +19,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -265,10 +266,6 @@ static int v3d_platform_drm_probe(struct + v3d->pdev = pdev; + drm = &v3d->drm; + +- ret = map_regs(v3d, &v3d->bridge_regs, "bridge"); +- if (ret) +- goto dev_free; +- + ret = map_regs(v3d, &v3d->hub_regs, "hub"); + if (ret) + goto dev_free; +@@ -283,6 +280,22 @@ static int v3d_platform_drm_probe(struct + v3d->cores = V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_NCORES); + WARN_ON(v3d->cores > 1); /* multicore not yet implemented */ + ++ v3d->reset = devm_reset_control_get_exclusive(dev, NULL); ++ if (IS_ERR(v3d->reset)) { ++ ret = PTR_ERR(v3d->reset); ++ ++ if (ret == -EPROBE_DEFER) ++ goto dev_free; ++ ++ v3d->reset = NULL; ++ ret = map_regs(v3d, &v3d->bridge_regs, "bridge"); ++ if (ret) { ++ dev_err(dev, ++ "Failed to get reset control or bridge regs\n"); ++ goto dev_free; ++ } ++ } ++ + if (v3d->ver < 41) { + ret = map_regs(v3d, &v3d->gca_regs, "gca"); + if (ret) +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -34,6 +34,7 @@ struct v3d_dev { + * and revision. + */ + int ver; ++ bool single_irq_line; + + struct device *dev; + struct platform_device *pdev; +@@ -42,6 +43,7 @@ struct v3d_dev { + void __iomem *bridge_regs; + void __iomem *gca_regs; + struct clk *clk; ++ struct reset_control *reset; + + /* Virtual and DMA addresses of the single shared page table. */ + volatile u32 *pt; +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -6,6 +6,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -69,7 +70,7 @@ v3d_idle_gca(struct v3d_dev *v3d) + } + + static void +-v3d_reset_v3d(struct v3d_dev *v3d) ++v3d_reset_by_bridge(struct v3d_dev *v3d) + { + int version = V3D_BRIDGE_READ(V3D_TOP_GR_BRIDGE_REVISION); + +@@ -89,6 +90,15 @@ v3d_reset_v3d(struct v3d_dev *v3d) + V3D_TOP_GR_BRIDGE_SW_INIT_1_V3D_CLK_108_SW_INIT); + V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_1, 0); + } ++} ++ ++static void ++v3d_reset_v3d(struct v3d_dev *v3d) ++{ ++ if (v3d->reset) ++ reset_control_reset(v3d->reset); ++ else ++ v3d_reset_by_bridge(v3d); + + v3d_init_hw_state(v3d); + } +--- a/drivers/gpu/drm/v3d/v3d_irq.c ++++ b/drivers/gpu/drm/v3d/v3d_irq.c +@@ -27,6 +27,9 @@ + V3D_HUB_INT_MMU_CAP | \ + V3D_HUB_INT_TFUC)) + ++static irqreturn_t ++v3d_hub_irq(int irq, void *arg); ++ + static void + v3d_overflow_mem_work(struct work_struct *work) + { +@@ -112,6 +115,12 @@ v3d_irq(int irq, void *arg) + if (intsts & V3D_INT_GMPV) + dev_err(v3d->dev, "GMP violation\n"); + ++ /* V3D 4.2 wires the hub and core IRQs together, so if we & ++ * didn't see the common one then check hub for MMU IRQs. ++ */ ++ if (v3d->single_irq_line && status == IRQ_NONE) ++ return v3d_hub_irq(irq, arg); ++ + return status; + } + +@@ -170,15 +179,22 @@ v3d_irq_init(struct v3d_dev *v3d) + V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS); + V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS); + +- ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), +- v3d_hub_irq, IRQF_SHARED, +- "v3d_hub", v3d); +- if (ret) +- goto fail; +- +- ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 1), +- v3d_irq, IRQF_SHARED, +- "v3d_core0", v3d); ++ if (platform_get_irq(v3d->pdev, 1) < 0) { ++ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), ++ v3d_irq, IRQF_SHARED, ++ "v3d", v3d); ++ v3d->single_irq_line = true; ++ } else { ++ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), ++ v3d_hub_irq, IRQF_SHARED, ++ "v3d_hub", v3d); ++ if (ret) ++ goto fail; ++ ++ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 1), ++ v3d_irq, IRQF_SHARED, ++ "v3d_core0", v3d); ++ } + if (ret) + goto fail; + diff --git a/target/linux/brcm2708/patches-4.19/950-0530-drm-v3d-Don-t-try-to-set-OVRTMUOUT-on-V3D-4.x.patch b/target/linux/brcm2708/patches-4.19/950-0530-drm-v3d-Don-t-try-to-set-OVRTMUOUT-on-V3D-4.x.patch new file mode 100644 index 0000000000..a6d0d26b47 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0530-drm-v3d-Don-t-try-to-set-OVRTMUOUT-on-V3D-4.x.patch @@ -0,0 +1,42 @@ +From 8011a92f6eabd682e62e268bcd80b45ce3f06af4 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Tue, 16 Oct 2018 10:13:41 -0700 +Subject: [PATCH] drm/v3d: Don't try to set OVRTMUOUT on V3D 4.x. + +The old field is gone and the register now has a different field, +QRMAXCNT for how many TMU requests get serviced before thread switch. +We were accidentally reducing it from its default of 0x3 (4 requests) +to 0x0 (1). + +v2: Skip setting the reg at all on 4.x, instead of trying to update + only the old field. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/v3d/v3d_gem.c | 3 ++- + drivers/gpu/drm/v3d/v3d_regs.h | 2 ++ + 2 files changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -25,7 +25,8 @@ v3d_init_core(struct v3d_dev *v3d, int c + * type. If you want the default behavior, you can still put + * "2" in the indirect texture state's output_type field. + */ +- V3D_CORE_WRITE(core, V3D_CTL_MISCCFG, V3D_MISCCFG_OVRTMUOUT); ++ if (v3d->ver < 40) ++ V3D_CORE_WRITE(core, V3D_CTL_MISCCFG, V3D_MISCCFG_OVRTMUOUT); + + /* Whenever we flush the L2T cache, we always want to flush + * the whole thing. +--- a/drivers/gpu/drm/v3d/v3d_regs.h ++++ b/drivers/gpu/drm/v3d/v3d_regs.h +@@ -216,6 +216,8 @@ + # define V3D_IDENT2_BCG_INT BIT(28) + + #define V3D_CTL_MISCCFG 0x00018 ++# define V3D_CTL_MISCCFG_QRMAXCNT_MASK V3D_MASK(3, 1) ++# define V3D_CTL_MISCCFG_QRMAXCNT_SHIFT 1 + # define V3D_MISCCFG_OVRTMUOUT BIT(0) + + #define V3D_CTL_L2CACTL 0x00020 diff --git a/target/linux/brcm2708/patches-4.19/950-0530-dt-bindings-pci-Add-DT-docs-for-Brcmstb-PCIe-device.patch b/target/linux/brcm2708/patches-4.19/950-0530-dt-bindings-pci-Add-DT-docs-for-Brcmstb-PCIe-device.patch deleted file mode 100644 index 8cd51b7961..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0530-dt-bindings-pci-Add-DT-docs-for-Brcmstb-PCIe-device.patch +++ /dev/null @@ -1,77 +0,0 @@ -From cb1acabb459677efbf95c54ce1dc5252be30a018 Mon Sep 17 00:00:00 2001 -From: Jim Quinlan -Date: Mon, 15 Jan 2018 18:28:39 -0500 -Subject: [PATCH 530/806] dt-bindings: pci: Add DT docs for Brcmstb PCIe device - -The DT bindings description of the Brcmstb PCIe device is described. This -node can be used by almost all Broadcom settop box chips, using -ARM, ARM64, or MIPS CPU architectures. - -Signed-off-by: Jim Quinlan ---- - .../devicetree/bindings/pci/brcmstb-pcie.txt | 59 +++++++++++++++++++ - 1 file changed, 59 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pci/brcmstb-pcie.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pci/brcmstb-pcie.txt -@@ -0,0 +1,59 @@ -+Brcmstb PCIe Host Controller Device Tree Bindings -+ -+Required Properties: -+- compatible -+ "brcm,bcm7425-pcie" -- for 7425 family MIPS-based SOCs. -+ "brcm,bcm7435-pcie" -- for 7435 family MIPS-based SOCs. -+ "brcm,bcm7445-pcie" -- for 7445 and later ARM based SOCs (not including -+ the 7278). -+ "brcm,bcm7278-pcie" -- for 7278 family ARM-based SOCs. -+ -+- reg -- the register start address and length for the PCIe reg block. -+- interrupts -- two interrupts are specified; the first interrupt is for -+ the PCI host controller and the second is for MSI if the built-in -+ MSI controller is to be used. -+- interrupt-names -- names of the interrupts (above): "pcie" and "msi". -+- #address-cells -- set to <3>. -+- #size-cells -- set to <2>. -+- #interrupt-cells: set to <1>. -+- interrupt-map-mask and interrupt-map, standard PCI properties to define the -+ mapping of the PCIe interface to interrupt numbers. -+- ranges: ranges for the PCI memory and I/O regions. -+- linux,pci-domain -- should be unique per host controller. -+ -+Optional Properties: -+- clocks -- phandle of pcie clock. -+- clock-names -- set to "sw_pcie" if clocks is used. -+- dma-ranges -- Specifies the inbound memory mapping regions when -+ an "identity map" is not possible. -+- msi-controller -- this property is typically specified to have the -+ PCIe controller use its internal MSI controller. -+- msi-parent -- set to use an external MSI interrupt controller. -+- brcm,enable-ssc -- (boolean) indicates usage of spread-spectrum clocking. -+- max-link-speed -- (integer) indicates desired generation of link: -+ 1 => 2.5 Gbps (gen1), 2 => 5.0 Gbps (gen2), 3 => 8.0 Gbps (gen3). -+ -+Example Node: -+ -+pcie0: pcie@f0460000 { -+ reg = <0x0 0xf0460000 0x0 0x9310>; -+ interrupts = <0x0 0x0 0x4>; -+ compatible = "brcm,bcm7445-pcie"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ ranges = <0x02000000 0x00000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x08000000 -+ 0x02000000 0x00000000 0x08000000 0x00000000 0xc8000000 0x00000000 0x08000000>; -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0 0 0 7>; -+ interrupt-map = <0 0 0 1 &intc 0 47 3 -+ 0 0 0 2 &intc 0 48 3 -+ 0 0 0 3 &intc 0 49 3 -+ 0 0 0 4 &intc 0 50 3>; -+ clocks = <&sw_pcie0>; -+ clock-names = "sw_pcie"; -+ msi-parent = <&pcie0>; /* use PCIe's internal MSI controller */ -+ msi-controller; /* use PCIe's internal MSI controller */ -+ brcm,ssc; -+ max-link-speed = <1>; -+ linux,pci-domain = <0>; -+ }; diff --git a/target/linux/brcm2708/patches-4.19/950-0531-drm-v3d-Make-sure-the-GPU-is-on-when-measuring-clock.patch b/target/linux/brcm2708/patches-4.19/950-0531-drm-v3d-Make-sure-the-GPU-is-on-when-measuring-clock.patch new file mode 100644 index 0000000000..30cb228964 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0531-drm-v3d-Make-sure-the-GPU-is-on-when-measuring-clock.patch @@ -0,0 +1,38 @@ +From 19846d53c32be7c9d8d46b369910374c5ea9b9d5 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 14 Jan 2019 17:26:04 -0800 +Subject: [PATCH] drm/v3d: Make sure the GPU is on when measuring + clocks. + +You'll get garbage measurements if the registers always read back +0xdeadbeef + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/v3d/v3d_debugfs.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/gpu/drm/v3d/v3d_debugfs.c ++++ b/drivers/gpu/drm/v3d/v3d_debugfs.c +@@ -187,6 +187,11 @@ static int v3d_measure_clock(struct seq_ + uint32_t cycles; + int core = 0; + int measure_ms = 1000; ++ int ret; ++ ++ ret = pm_runtime_get_sync(v3d->dev); ++ if (ret < 0) ++ return ret; + + if (v3d->ver >= 40) { + V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3, +@@ -210,6 +215,9 @@ static int v3d_measure_clock(struct seq_ + cycles / (measure_ms * 1000), + (cycles / (measure_ms * 100)) % 10); + ++ pm_runtime_mark_last_busy(v3d->dev); ++ pm_runtime_put_autosuspend(v3d->dev); ++ + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0531-pcie-brcmstb-Changes-for-BCM2711.patch b/target/linux/brcm2708/patches-4.19/950-0531-pcie-brcmstb-Changes-for-BCM2711.patch deleted file mode 100644 index 58803a8bdd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0531-pcie-brcmstb-Changes-for-BCM2711.patch +++ /dev/null @@ -1,1411 +0,0 @@ -From 545951be6cabac8b1df85771c44335a0eaaa3c5d Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 19 Feb 2019 22:06:59 +0000 -Subject: [PATCH 531/806] pcie-brcmstb: Changes for BCM2711 - -The initial brcmstb PCIe driver - originally taken from the V3(?) -patch set - has been modified significantly for the BCM2711. - -Signed-off-by: Phil Elwell ---- - drivers/dma/bcm2835-dma.c | 107 ++++ - drivers/pci/controller/Makefile | 4 + - drivers/pci/controller/pcie-brcmstb-bounce.c | 564 +++++++++++++++++++ - drivers/pci/controller/pcie-brcmstb-bounce.h | 32 ++ - drivers/pci/controller/pcie-brcmstb.c | 237 ++++---- - drivers/soc/bcm/brcmstb/Makefile | 2 +- - drivers/soc/bcm/brcmstb/memory.c | 158 ++++++ - 7 files changed, 996 insertions(+), 108 deletions(-) - create mode 100644 drivers/pci/controller/pcie-brcmstb-bounce.c - create mode 100644 drivers/pci/controller/pcie-brcmstb-bounce.h - create mode 100644 drivers/soc/bcm/brcmstb/memory.c - ---- a/drivers/dma/bcm2835-dma.c -+++ b/drivers/dma/bcm2835-dma.c -@@ -68,6 +68,17 @@ struct bcm2835_dma_cb { - uint32_t pad[2]; - }; - -+struct bcm2838_dma40_scb { -+ uint32_t ti; -+ uint32_t src; -+ uint32_t srci; -+ uint32_t dst; -+ uint32_t dsti; -+ uint32_t len; -+ uint32_t next_cb; -+ uint32_t rsvd; -+}; -+ - struct bcm2835_cb_entry { - struct bcm2835_dma_cb *cb; - dma_addr_t paddr; -@@ -185,6 +196,45 @@ struct bcm2835_desc { - #define MAX_DMA_LEN SZ_1G - #define MAX_LITE_DMA_LEN (SZ_64K - 4) - -+/* 40-bit DMA support */ -+#define BCM2838_DMA40_CS 0x00 -+#define BCM2838_DMA40_CB 0x04 -+#define BCM2838_DMA40_DEBUG 0x0c -+#define BCM2858_DMA40_TI 0x10 -+#define BCM2838_DMA40_SRC 0x14 -+#define BCM2838_DMA40_SRCI 0x18 -+#define BCM2838_DMA40_DEST 0x1c -+#define BCM2838_DMA40_DESTI 0x20 -+#define BCM2838_DMA40_LEN 0x24 -+#define BCM2838_DMA40_NEXT_CB 0x28 -+#define BCM2838_DMA40_DEBUG2 0x2c -+ -+#define BCM2838_DMA40_CS_ACTIVE BIT(0) -+#define BCM2838_DMA40_CS_END BIT(1) -+ -+#define BCM2838_DMA40_CS_QOS(x) (((x) & 0x1f) << 16) -+#define BCM2838_DMA40_CS_PANIC_QOS(x) (((x) & 0x1f) << 20) -+#define BCM2838_DMA40_CS_WRITE_WAIT BIT(28) -+ -+#define BCM2838_DMA40_BURST_LEN(x) ((((x) - 1) & 0xf) << 8) -+#define BCM2838_DMA40_INC BIT(12) -+#define BCM2838_DMA40_SIZE_128 (2 << 13) -+ -+#define BCM2838_DMA40_MEMCPY_QOS \ -+ (BCM2838_DMA40_CS_QOS(0x0) | \ -+ BCM2838_DMA40_CS_PANIC_QOS(0x0) | \ -+ BCM2838_DMA40_CS_WRITE_WAIT) -+ -+#define BCM2838_DMA40_MEMCPY_XFER_INFO \ -+ (BCM2838_DMA40_SIZE_128 | \ -+ BCM2838_DMA40_INC | \ -+ BCM2838_DMA40_BURST_LEN(16)) -+ -+static void __iomem *memcpy_chan; -+static struct bcm2838_dma40_scb *memcpy_scb; -+static dma_addr_t memcpy_scb_dma; -+DEFINE_SPINLOCK(memcpy_lock); -+ - static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c) - { - /* lite and normal channels have different max frame length */ -@@ -868,6 +918,56 @@ static void bcm2835_dma_free(struct bcm2 - } - } - -+int bcm2838_dma40_memcpy_init(struct device *dev) -+{ -+ if (memcpy_scb) -+ return 0; -+ -+ memcpy_scb = dma_alloc_coherent(dev, sizeof(*memcpy_scb), -+ &memcpy_scb_dma, GFP_KERNEL); -+ -+ if (!memcpy_scb) { -+ pr_err("bcm2838_dma40_memcpy_init failed!\n"); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL(bcm2838_dma40_memcpy_init); -+ -+void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size) -+{ -+ struct bcm2838_dma40_scb *scb = memcpy_scb; -+ unsigned long flags; -+ -+ if (!scb) { -+ pr_err("bcm2838_dma40_memcpy not initialised!\n"); -+ return; -+ } -+ -+ spin_lock_irqsave(&memcpy_lock, flags); -+ -+ scb->ti = 0; -+ scb->src = lower_32_bits(src); -+ scb->srci = upper_32_bits(src) | BCM2838_DMA40_MEMCPY_XFER_INFO; -+ scb->dst = lower_32_bits(dst); -+ scb->dsti = upper_32_bits(dst) | BCM2838_DMA40_MEMCPY_XFER_INFO; -+ scb->len = size; -+ scb->next_cb = 0; -+ -+ writel((u32)(memcpy_scb_dma >> 5), memcpy_chan + BCM2838_DMA40_CB); -+ writel(BCM2838_DMA40_MEMCPY_QOS + BCM2838_DMA40_CS_ACTIVE, -+ memcpy_chan + BCM2838_DMA40_CS); -+ /* Poll for completion */ -+ while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_CS_END)) -+ cpu_relax(); -+ -+ writel(BCM2838_DMA40_CS_END, memcpy_chan + BCM2838_DMA40_CS); -+ -+ spin_unlock_irqrestore(&memcpy_lock, flags); -+} -+EXPORT_SYMBOL(bcm2838_dma40_memcpy); -+ - static const struct of_device_id bcm2835_dma_of_match[] = { - { .compatible = "brcm,bcm2835-dma", }, - {}, -@@ -966,6 +1066,13 @@ static int bcm2835_dma_probe(struct plat - /* Channel 0 is used by the legacy API */ - chans_available &= ~BCM2835_DMA_BULK_MASK; - -+ /* We can't use channels 11-13 yet */ -+ chans_available &= ~(BIT(11) | BIT(12) | BIT(13)); -+ -+ /* Grab channel 14 for the 40-bit DMA memcpy */ -+ chans_available &= ~BIT(14); -+ memcpy_chan = BCM2835_DMA_CHANIO(base, 14); -+ - /* get irqs for each channel that we support */ - for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { - /* skip masked out channels */ ---- a/drivers/pci/controller/Makefile -+++ b/drivers/pci/controller/Makefile -@@ -29,6 +29,10 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-medi - obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o - obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o - obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o -+ifdef CONFIG_ARM -+obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb-bounce.o -+endif -+ - obj-$(CONFIG_VMD) += vmd.o - # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW - obj-y += dwc/ ---- /dev/null -+++ b/drivers/pci/controller/pcie-brcmstb-bounce.c -@@ -0,0 +1,564 @@ -+/* -+ * This code started out as a version of arch/arm/common/dmabounce.c, -+ * modified to cope with highmem pages. Now it has been changed heavily - -+ * it now preallocates a large block (currently 4MB) and carves it up -+ * sequentially in ring fashion, and DMA is used to copy the data - to the -+ * point where very little of the original remains. -+ * -+ * Copyright (C) 2019 Raspberry Pi (Trading) Ltd. -+ * -+ * Original version by Brad Parker (brad@heeltoe.com) -+ * Re-written by Christopher Hoover -+ * Made generic by Deepak Saxena -+ * -+ * Copyright (C) 2002 Hewlett Packard Company. -+ * Copyright (C) 2004 MontaVista Software, Inc. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define STATS -+ -+#ifdef STATS -+#define DO_STATS(X) do { X ; } while (0) -+#else -+#define DO_STATS(X) do { } while (0) -+#endif -+ -+/* ************************************************** */ -+ -+struct safe_buffer { -+ struct list_head node; -+ -+ /* original request */ -+ size_t size; -+ int direction; -+ -+ struct dmabounce_pool *pool; -+ void *safe; -+ dma_addr_t unsafe_dma_addr; -+ dma_addr_t safe_dma_addr; -+}; -+ -+struct dmabounce_pool { -+ unsigned long pages; -+ void *virt_addr; -+ dma_addr_t dma_addr; -+ unsigned long *alloc_map; -+ unsigned long alloc_pos; -+ spinlock_t lock; -+ struct device *dev; -+ unsigned long num_pages; -+#ifdef STATS -+ size_t max_size; -+ unsigned long num_bufs; -+ unsigned long max_bufs; -+ unsigned long max_pages; -+#endif -+}; -+ -+struct dmabounce_device_info { -+ struct device *dev; -+ dma_addr_t threshold; -+ struct list_head safe_buffers; -+ struct dmabounce_pool pool; -+ rwlock_t lock; -+#ifdef STATS -+ unsigned long map_count; -+ unsigned long unmap_count; -+ unsigned long sync_dev_count; -+ unsigned long sync_cpu_count; -+ unsigned long fail_count; -+ int attr_res; -+#endif -+}; -+ -+static struct dmabounce_device_info *g_dmabounce_device_info; -+ -+extern int bcm2838_dma40_memcpy_init(struct device *dev); -+extern void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size); -+ -+#ifdef STATS -+static ssize_t -+bounce_show(struct device *dev, struct device_attribute *attr, char *buf) -+{ -+ struct dmabounce_device_info *device_info = g_dmabounce_device_info; -+ return sprintf(buf, "m:%lu/%lu s:%lu/%lu f:%lu s:%zu b:%lu/%lu a:%lu/%lu\n", -+ device_info->map_count, -+ device_info->unmap_count, -+ device_info->sync_dev_count, -+ device_info->sync_cpu_count, -+ device_info->fail_count, -+ device_info->pool.max_size, -+ device_info->pool.num_bufs, -+ device_info->pool.max_bufs, -+ device_info->pool.num_pages * PAGE_SIZE, -+ device_info->pool.max_pages * PAGE_SIZE); -+} -+ -+static DEVICE_ATTR(dmabounce_stats, 0444, bounce_show, NULL); -+#endif -+ -+static int bounce_create(struct dmabounce_pool *pool, struct device *dev, -+ unsigned long buffer_size) -+{ -+ int ret = -ENOMEM; -+ pool->pages = (buffer_size + PAGE_SIZE - 1)/PAGE_SIZE; -+ pool->alloc_map = bitmap_zalloc(pool->pages, GFP_KERNEL); -+ if (!pool->alloc_map) -+ goto err_bitmap; -+ pool->virt_addr = dma_alloc_coherent(dev, pool->pages * PAGE_SIZE, -+ &pool->dma_addr, GFP_KERNEL); -+ if (!pool->virt_addr) -+ goto err_dmabuf; -+ -+ pool->alloc_pos = 0; -+ spin_lock_init(&pool->lock); -+ pool->dev = dev; -+ pool->num_pages = 0; -+ -+ DO_STATS(pool->max_size = 0); -+ DO_STATS(pool->num_bufs = 0); -+ DO_STATS(pool->max_bufs = 0); -+ DO_STATS(pool->max_pages = 0); -+ -+ return 0; -+ -+err_dmabuf: -+ bitmap_free(pool->alloc_map); -+err_bitmap: -+ return ret; -+} -+ -+static void bounce_destroy(struct dmabounce_pool *pool) -+{ -+ dma_free_coherent(pool->dev, pool->pages * PAGE_SIZE, pool->virt_addr, -+ pool->dma_addr); -+ -+ bitmap_free(pool->alloc_map); -+} -+ -+static void *bounce_alloc(struct dmabounce_pool *pool, size_t size, -+ dma_addr_t *dmaaddrp) -+{ -+ unsigned long pages; -+ unsigned long flags; -+ unsigned long pos; -+ -+ pages = (size + PAGE_SIZE - 1)/PAGE_SIZE; -+ -+ DO_STATS(pool->max_size = max(size, pool->max_size)); -+ -+ spin_lock_irqsave(&pool->lock, flags); -+ pos = bitmap_find_next_zero_area(pool->alloc_map, pool->pages, -+ pool->alloc_pos, pages, 0); -+ /* If not found, try from the start */ -+ if (pos >= pool->pages && pool->alloc_pos) -+ pos = bitmap_find_next_zero_area(pool->alloc_map, pool->pages, -+ 0, pages, 0); -+ -+ if (pos >= pool->pages) { -+ spin_unlock_irqrestore(&pool->lock, flags); -+ return NULL; -+ } -+ -+ bitmap_set(pool->alloc_map, pos, pages); -+ pool->alloc_pos = (pos + pages) % pool->pages; -+ pool->num_pages += pages; -+ -+ DO_STATS(pool->num_bufs++); -+ DO_STATS(pool->max_bufs = max(pool->num_bufs, pool->max_bufs)); -+ DO_STATS(pool->max_pages = max(pool->num_pages, pool->max_pages)); -+ -+ spin_unlock_irqrestore(&pool->lock, flags); -+ -+ *dmaaddrp = pool->dma_addr + pos * PAGE_SIZE; -+ -+ return pool->virt_addr + pos * PAGE_SIZE; -+} -+ -+static void -+bounce_free(struct dmabounce_pool *pool, void *buf, size_t size) -+{ -+ unsigned long pages; -+ unsigned long flags; -+ unsigned long pos; -+ -+ pages = (size + PAGE_SIZE - 1)/PAGE_SIZE; -+ pos = (buf - pool->virt_addr)/PAGE_SIZE; -+ -+ BUG_ON((buf - pool->virt_addr) & (PAGE_SIZE - 1)); -+ -+ spin_lock_irqsave(&pool->lock, flags); -+ bitmap_clear(pool->alloc_map, pos, pages); -+ pool->num_pages -= pages; -+ if (pool->num_pages == 0) -+ pool->alloc_pos = 0; -+ DO_STATS(pool->num_bufs--); -+ spin_unlock_irqrestore(&pool->lock, flags); -+} -+ -+/* allocate a 'safe' buffer and keep track of it */ -+static struct safe_buffer * -+alloc_safe_buffer(struct dmabounce_device_info *device_info, -+ dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) -+{ -+ struct safe_buffer *buf; -+ struct dmabounce_pool *pool = &device_info->pool; -+ struct device *dev = device_info->dev; -+ unsigned long flags; -+ -+ /* -+ * Although one might expect this to be called in thread context, -+ * using GFP_KERNEL here leads to hard-to-debug lockups. in_atomic() -+ * was previously used to select the appropriate allocation mode, -+ * but this is unsafe. -+ */ -+ buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC); -+ if (!buf) { -+ dev_warn(dev, "%s: kmalloc failed\n", __func__); -+ return NULL; -+ } -+ -+ buf->unsafe_dma_addr = dma_addr; -+ buf->size = size; -+ buf->direction = dir; -+ buf->pool = pool; -+ -+ buf->safe = bounce_alloc(pool, size, &buf->safe_dma_addr); -+ -+ if (!buf->safe) { -+ dev_warn(dev, -+ "%s: could not alloc dma memory (size=%d)\n", -+ __func__, size); -+ kfree(buf); -+ return NULL; -+ } -+ -+ write_lock_irqsave(&device_info->lock, flags); -+ list_add(&buf->node, &device_info->safe_buffers); -+ write_unlock_irqrestore(&device_info->lock, flags); -+ -+ return buf; -+} -+ -+/* determine if a buffer is from our "safe" pool */ -+static struct safe_buffer * -+find_safe_buffer(struct dmabounce_device_info *device_info, -+ dma_addr_t safe_dma_addr) -+{ -+ struct safe_buffer *b, *rb = NULL; -+ unsigned long flags; -+ -+ read_lock_irqsave(&device_info->lock, flags); -+ -+ list_for_each_entry(b, &device_info->safe_buffers, node) -+ if (b->safe_dma_addr <= safe_dma_addr && -+ b->safe_dma_addr + b->size > safe_dma_addr) { -+ rb = b; -+ break; -+ } -+ -+ read_unlock_irqrestore(&device_info->lock, flags); -+ return rb; -+} -+ -+static void -+free_safe_buffer(struct dmabounce_device_info *device_info, -+ struct safe_buffer *buf) -+{ -+ unsigned long flags; -+ -+ write_lock_irqsave(&device_info->lock, flags); -+ list_del(&buf->node); -+ write_unlock_irqrestore(&device_info->lock, flags); -+ -+ bounce_free(buf->pool, buf->safe, buf->size); -+ -+ kfree(buf); -+} -+ -+/* ************************************************** */ -+ -+static struct safe_buffer * -+find_safe_buffer_dev(struct device *dev, dma_addr_t dma_addr, const char *where) -+{ -+ if (!dev || !g_dmabounce_device_info) -+ return NULL; -+ if (dma_mapping_error(dev, dma_addr)) { -+ dev_err(dev, "Trying to %s invalid mapping\n", where); -+ return NULL; -+ } -+ return find_safe_buffer(g_dmabounce_device_info, dma_addr); -+} -+ -+static dma_addr_t -+map_single(struct device *dev, struct safe_buffer *buf, size_t size, -+ enum dma_data_direction dir, unsigned long attrs) -+{ -+ BUG_ON(buf->size != size); -+ BUG_ON(buf->direction != dir); -+ -+ dev_dbg(dev, "map: %llx->%llx\n", (u64)buf->unsafe_dma_addr, -+ (u64)buf->safe_dma_addr); -+ -+ if ((dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) && -+ !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) -+ bcm2838_dma40_memcpy(buf->safe_dma_addr, buf->unsafe_dma_addr, -+ size); -+ -+ return buf->safe_dma_addr; -+} -+ -+static dma_addr_t -+unmap_single(struct device *dev, struct safe_buffer *buf, size_t size, -+ enum dma_data_direction dir, unsigned long attrs) -+{ -+ BUG_ON(buf->size != size); -+ BUG_ON(buf->direction != dir); -+ -+ if ((dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) && -+ !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) { -+ dev_dbg(dev, "unmap: %llx->%llx\n", (u64)buf->safe_dma_addr, -+ (u64)buf->unsafe_dma_addr); -+ -+ bcm2838_dma40_memcpy(buf->unsafe_dma_addr, buf->safe_dma_addr, -+ size); -+ } -+ return buf->unsafe_dma_addr; -+} -+ -+/* ************************************************** */ -+ -+/* -+ * see if a buffer address is in an 'unsafe' range. if it is -+ * allocate a 'safe' buffer and copy the unsafe buffer into it. -+ * substitute the safe buffer for the unsafe one. -+ * (basically move the buffer from an unsafe area to a safe one) -+ */ -+static dma_addr_t -+dmabounce_map_page(struct device *dev, struct page *page, unsigned long offset, -+ size_t size, enum dma_data_direction dir, -+ unsigned long attrs) -+{ -+ struct dmabounce_device_info *device_info = g_dmabounce_device_info; -+ dma_addr_t dma_addr; -+ -+ dma_addr = pfn_to_dma(dev, page_to_pfn(page)) + offset; -+ -+ arm_dma_ops.sync_single_for_device(dev, dma_addr, size, dir); -+ -+ if (device_info && (dma_addr + size) > device_info->threshold) { -+ struct safe_buffer *buf; -+ -+ buf = alloc_safe_buffer(device_info, dma_addr, size, dir); -+ if (!buf) { -+ DO_STATS(device_info->fail_count++); -+ return ARM_MAPPING_ERROR; -+ } -+ -+ DO_STATS(device_info->map_count++); -+ -+ dma_addr = map_single(dev, buf, size, dir, attrs); -+ } -+ -+ return dma_addr; -+} -+ -+/* -+ * see if a mapped address was really a "safe" buffer and if so, copy -+ * the data from the safe buffer back to the unsafe buffer and free up -+ * the safe buffer. (basically return things back to the way they -+ * should be) -+ */ -+static void -+dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, -+ enum dma_data_direction dir, unsigned long attrs) -+{ -+ struct safe_buffer *buf; -+ -+ buf = find_safe_buffer_dev(dev, dma_addr, __func__); -+ if (buf) { -+ DO_STATS(g_dmabounce_device_info->unmap_count++); -+ dma_addr = unmap_single(dev, buf, size, dir, attrs); -+ free_safe_buffer(g_dmabounce_device_info, buf); -+ } -+ -+ arm_dma_ops.sync_single_for_cpu(dev, dma_addr, size, dir); -+} -+ -+/* -+ * A version of dmabounce_map_page that assumes the mapping has already -+ * been created - intended for streaming operation. -+ */ -+static void -+dmabounce_sync_for_device(struct device *dev, dma_addr_t dma_addr, size_t size, -+ enum dma_data_direction dir) -+{ -+ struct safe_buffer *buf; -+ -+ arm_dma_ops.sync_single_for_device(dev, dma_addr, size, dir); -+ -+ buf = find_safe_buffer_dev(dev, dma_addr, __func__); -+ if (buf) { -+ DO_STATS(g_dmabounce_device_info->sync_dev_count++); -+ map_single(dev, buf, size, dir, 0); -+ } -+} -+ -+/* -+ * A version of dmabounce_unmap_page that doesn't destroy the mapping - -+ * intended for streaming operation. -+ */ -+static void -+dmabounce_sync_for_cpu(struct device *dev, dma_addr_t dma_addr, -+ size_t size, enum dma_data_direction dir) -+{ -+ struct safe_buffer *buf; -+ -+ buf = find_safe_buffer_dev(dev, dma_addr, __func__); -+ if (buf) { -+ DO_STATS(g_dmabounce_device_info->sync_cpu_count++); -+ dma_addr = unmap_single(dev, buf, size, dir, 0); -+ } -+ -+ arm_dma_ops.sync_single_for_cpu(dev, dma_addr, size, dir); -+} -+ -+static int dmabounce_dma_supported(struct device *dev, u64 dma_mask) -+{ -+ if (g_dmabounce_device_info) -+ return 0; -+ -+ return arm_dma_ops.dma_supported(dev, dma_mask); -+} -+ -+static int dmabounce_mapping_error(struct device *dev, dma_addr_t dma_addr) -+{ -+ return arm_dma_ops.mapping_error(dev, dma_addr); -+} -+ -+static const struct dma_map_ops dmabounce_ops = { -+ .alloc = arm_dma_alloc, -+ .free = arm_dma_free, -+ .mmap = arm_dma_mmap, -+ .get_sgtable = arm_dma_get_sgtable, -+ .map_page = dmabounce_map_page, -+ .unmap_page = dmabounce_unmap_page, -+ .sync_single_for_cpu = dmabounce_sync_for_cpu, -+ .sync_single_for_device = dmabounce_sync_for_device, -+ .map_sg = arm_dma_map_sg, -+ .unmap_sg = arm_dma_unmap_sg, -+ .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu, -+ .sync_sg_for_device = arm_dma_sync_sg_for_device, -+ .dma_supported = dmabounce_dma_supported, -+ .mapping_error = dmabounce_mapping_error, -+}; -+ -+int brcm_pcie_bounce_register_dev(struct device *dev, -+ unsigned long buffer_size, -+ dma_addr_t threshold) -+{ -+ struct dmabounce_device_info *device_info; -+ int ret; -+ -+ /* Only support a single client */ -+ if (g_dmabounce_device_info) -+ return -EBUSY; -+ -+ ret = bcm2838_dma40_memcpy_init(dev); -+ if (ret) -+ return ret; -+ -+ device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC); -+ if (!device_info) { -+ dev_err(dev, -+ "Could not allocated dmabounce_device_info\n"); -+ return -ENOMEM; -+ } -+ -+ ret = bounce_create(&device_info->pool, dev, buffer_size); -+ if (ret) { -+ dev_err(dev, -+ "dmabounce: could not allocate %ld byte DMA pool\n", -+ buffer_size); -+ goto err_bounce; -+ } -+ -+ device_info->dev = dev; -+ device_info->threshold = threshold; -+ INIT_LIST_HEAD(&device_info->safe_buffers); -+ rwlock_init(&device_info->lock); -+ -+ DO_STATS(device_info->map_count = 0); -+ DO_STATS(device_info->unmap_count = 0); -+ DO_STATS(device_info->sync_dev_count = 0); -+ DO_STATS(device_info->sync_cpu_count = 0); -+ DO_STATS(device_info->fail_count = 0); -+ DO_STATS(device_info->attr_res = -+ device_create_file(dev, &dev_attr_dmabounce_stats)); -+ -+ g_dmabounce_device_info = device_info; -+ set_dma_ops(dev, &dmabounce_ops); -+ -+ dev_info(dev, "dmabounce: registered device - %ld kB, threshold %pad\n", -+ buffer_size / 1024, &threshold); -+ -+ return 0; -+ -+ err_bounce: -+ kfree(device_info); -+ return ret; -+} -+EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); -+ -+void brcm_pcie_bounce_unregister_dev(struct device *dev) -+{ -+ struct dmabounce_device_info *device_info = g_dmabounce_device_info; -+ -+ g_dmabounce_device_info = NULL; -+ set_dma_ops(dev, NULL); -+ -+ if (!device_info) { -+ dev_warn(dev, -+ "Never registered with dmabounce but attempting" -+ "to unregister!\n"); -+ return; -+ } -+ -+ if (!list_empty(&device_info->safe_buffers)) { -+ dev_err(dev, -+ "Removing from dmabounce with pending buffers!\n"); -+ BUG(); -+ } -+ -+ bounce_destroy(&device_info->pool); -+ -+ DO_STATS(if (device_info->attr_res == 0) -+ device_remove_file(dev, &dev_attr_dmabounce_stats)); -+ -+ kfree(device_info); -+ -+ dev_info(dev, "dmabounce: device unregistered\n"); -+} -+EXPORT_SYMBOL(brcm_pcie_bounce_unregister_dev); -+ -+MODULE_AUTHOR("Phil Elwell "); -+MODULE_DESCRIPTION("Dedicate DMA bounce support for pcie-brcmstb"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/pci/controller/pcie-brcmstb-bounce.h -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * Copyright (C) 2019 Raspberry Pi (Trading) Ltd. -+ */ -+ -+#ifndef _PCIE_BRCMSTB_BOUNCE_H -+#define _PCIE_BRCMSTB_BOUNCE_H -+ -+#ifdef CONFIG_ARM -+ -+int brcm_pcie_bounce_register_dev(struct device *dev, unsigned long buffer_size, -+ dma_addr_t threshold); -+ -+int brcm_pcie_bounce_unregister_dev(struct device *dev); -+ -+#else -+ -+static inline int brcm_pcie_bounce_register_dev(struct device *dev, -+ unsigned long buffer_size, -+ dma_addr_t threshold) -+{ -+ return 0; -+} -+ -+static inline int brcm_pcie_bounce_unregister_dev(struct device *dev) -+{ -+ return 0; -+} -+ -+#endif -+ -+#endif /* _PCIE_BRCMSTB_BOUNCE_H */ ---- a/drivers/pci/controller/pcie-brcmstb.c -+++ b/drivers/pci/controller/pcie-brcmstb.c -@@ -29,6 +29,7 @@ - #include - #include - #include "../pci.h" -+#include "pcie-brcmstb-bounce.h" - - /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ - #define BRCM_PCIE_CAP_REGS 0x00ac -@@ -53,6 +54,7 @@ - #define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044 - #define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048 - #define PCIE_MISC_MSI_DATA_CONFIG 0x404c -+#define PCIE_MISC_EOI_CTRL 0x4060 - #define PCIE_MISC_PCIE_CTRL 0x4064 - #define PCIE_MISC_PCIE_STATUS 0x4068 - #define PCIE_MISC_REVISION 0x406c -@@ -260,12 +262,14 @@ struct brcm_pcie { - unsigned int rev; - const int *reg_offsets; - const int *reg_field_info; -+ u32 max_burst_size; - enum pcie_type type; - }; - - struct pcie_cfg_data { - const int *reg_field_info; - const int *offsets; -+ const u32 max_burst_size; - const enum pcie_type type; - }; - -@@ -288,24 +292,27 @@ static const int pcie_offset_bcm7425[] = - static const struct pcie_cfg_data bcm7425_cfg = { - .reg_field_info = pcie_reg_field_info, - .offsets = pcie_offset_bcm7425, -+ .max_burst_size = BURST_SIZE_256, - .type = BCM7425, - }; - - static const int pcie_offsets[] = { - [RGR1_SW_INIT_1] = 0x9210, - [EXT_CFG_INDEX] = 0x9000, -- [EXT_CFG_DATA] = 0x9004, -+ [EXT_CFG_DATA] = 0x8000, - }; - - static const struct pcie_cfg_data bcm7435_cfg = { - .reg_field_info = pcie_reg_field_info, - .offsets = pcie_offsets, -+ .max_burst_size = BURST_SIZE_256, - .type = BCM7435, - }; - - static const struct pcie_cfg_data generic_cfg = { - .reg_field_info = pcie_reg_field_info, - .offsets = pcie_offsets, -+ .max_burst_size = BURST_SIZE_128, // before BURST_SIZE_512 - .type = GENERIC, - }; - -@@ -318,6 +325,7 @@ static const int pcie_offset_bcm7278[] = - static const struct pcie_cfg_data bcm7278_cfg = { - .reg_field_info = pcie_reg_field_info_bcm7278, - .offsets = pcie_offset_bcm7278, -+ .max_burst_size = BURST_SIZE_512, - .type = BCM7278, - }; - -@@ -360,7 +368,6 @@ static struct pci_ops brcm_pcie_ops = { - (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT))) - - static const struct dma_map_ops *arch_dma_ops; --static const struct dma_map_ops *brcm_dma_ops_ptr; - static struct of_pci_range *dma_ranges; - static int num_dma_ranges; - -@@ -369,6 +376,16 @@ static int num_memc; - static int num_pcie; - static DEFINE_MUTEX(brcm_pcie_lock); - -+static unsigned int bounce_buffer = 32*1024*1024; -+module_param(bounce_buffer, uint, 0644); -+MODULE_PARM_DESC(bounce_buffer, "Size of bounce buffer"); -+ -+static unsigned int bounce_threshold = 0xc0000000; -+module_param(bounce_threshold, uint, 0644); -+MODULE_PARM_DESC(bounce_threshold, "Bounce threshold"); -+ -+static struct brcm_pcie *g_pcie; -+ - static dma_addr_t brcm_to_pci(dma_addr_t addr) - { - struct of_pci_range *p; -@@ -457,12 +474,10 @@ static int brcm_map_sg(struct device *de - struct scatterlist *sg; - - for_each_sg(sgl, sg, nents, i) { --#ifdef CONFIG_NEED_SG_DMA_LENGTH -- sg->dma_length = sg->length; --#endif -+ sg_dma_len(sg) = sg->length; - sg->dma_address = -- brcm_dma_ops_ptr->map_page(dev, sg_page(sg), sg->offset, -- sg->length, dir, attrs); -+ brcm_map_page(dev, sg_page(sg), sg->offset, -+ sg->length, dir, attrs); - if (dma_mapping_error(dev, sg->dma_address)) - goto bad_mapping; - } -@@ -470,8 +485,8 @@ static int brcm_map_sg(struct device *de - - bad_mapping: - for_each_sg(sgl, sg, i, j) -- brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg), -- sg_dma_len(sg), dir, attrs); -+ brcm_unmap_page(dev, sg_dma_address(sg), -+ sg_dma_len(sg), dir, attrs); - return 0; - } - -@@ -484,8 +499,8 @@ static void brcm_unmap_sg(struct device - struct scatterlist *sg; - - for_each_sg(sgl, sg, nents, i) -- brcm_dma_ops_ptr->unmap_page(dev, sg_dma_address(sg), -- sg_dma_len(sg), dir, attrs); -+ brcm_unmap_page(dev, sg_dma_address(sg), -+ sg_dma_len(sg), dir, attrs); - } - - static void brcm_sync_single_for_cpu(struct device *dev, -@@ -531,8 +546,8 @@ void brcm_sync_sg_for_cpu(struct device - int i; - - for_each_sg(sgl, sg, nents, i) -- brcm_dma_ops_ptr->sync_single_for_cpu(dev, sg_dma_address(sg), -- sg->length, dir); -+ brcm_sync_single_for_cpu(dev, sg_dma_address(sg), -+ sg->length, dir); - } - - void brcm_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, -@@ -542,9 +557,9 @@ void brcm_sync_sg_for_device(struct devi - int i; - - for_each_sg(sgl, sg, nents, i) -- brcm_dma_ops_ptr->sync_single_for_device(dev, -- sg_dma_address(sg), -- sg->length, dir); -+ brcm_sync_single_for_device(dev, -+ sg_dma_address(sg), -+ sg->length, dir); - } - - static int brcm_mapping_error(struct device *dev, dma_addr_t dma_addr) -@@ -633,17 +648,47 @@ static void brcm_set_dma_ops(struct devi - set_dma_ops(dev, &brcm_dma_ops); - } - -+static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, -+ unsigned int val); - static int brcmstb_platform_notifier(struct notifier_block *nb, - unsigned long event, void *__dev) - { -+ extern unsigned long max_pfn; - struct device *dev = __dev; -+ const char *rc_name = "0000:00:00.0"; - -- brcm_dma_ops_ptr = &brcm_dma_ops; -- if (event != BUS_NOTIFY_ADD_DEVICE) -- return NOTIFY_DONE; -+ switch (event) { -+ case BUS_NOTIFY_ADD_DEVICE: -+ if (max_pfn > (bounce_threshold/PAGE_SIZE) && -+ strcmp(dev->kobj.name, rc_name)) { -+ int ret; -+ -+ ret = brcm_pcie_bounce_register_dev(dev, bounce_buffer, -+ (dma_addr_t)bounce_threshold); -+ if (ret) { -+ dev_err(dev, -+ "brcm_pcie_bounce_register_dev() failed: %d\n", -+ ret); -+ return ret; -+ } -+ } -+ brcm_set_dma_ops(dev); -+ return NOTIFY_OK; -+ -+ case BUS_NOTIFY_DEL_DEVICE: -+ if (!strcmp(dev->kobj.name, rc_name) && g_pcie) { -+ /* Force a bus reset */ -+ brcm_pcie_perst_set(g_pcie, 1); -+ msleep(100); -+ brcm_pcie_perst_set(g_pcie, 0); -+ } else if (max_pfn > (bounce_threshold/PAGE_SIZE)) { -+ brcm_pcie_bounce_unregister_dev(dev); -+ } -+ return NOTIFY_OK; - -- brcm_set_dma_ops(dev); -- return NOTIFY_OK; -+ default: -+ return NOTIFY_DONE; -+ } - } - - static struct notifier_block brcmstb_platform_nb = { -@@ -914,6 +959,7 @@ static void brcm_pcie_msi_isr(struct irq - } - } - chained_irq_exit(chip, desc); -+ bcm_writel(1, msi->base + PCIE_MISC_EOI_CTRL); - } - - static void brcm_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) -@@ -930,7 +976,8 @@ static void brcm_compose_msi_msg(struct - static int brcm_msi_set_affinity(struct irq_data *irq_data, - const struct cpumask *mask, bool force) - { -- return -EINVAL; -+ struct brcm_msi *msi = irq_data_get_irq_chip_data(irq_data); -+ return __irq_set_affinity(msi->irq, mask, force); - } - - static struct irq_chip brcm_msi_bottom_irq_chip = { -@@ -1168,9 +1215,9 @@ static void __iomem *brcm_pcie_map_conf( - return PCI_SLOT(devfn) ? NULL : base + where; - - /* For devices, write to the config space index register */ -- idx = cfg_index(bus->number, devfn, where); -+ idx = cfg_index(bus->number, devfn, 0); - bcm_writel(idx, pcie->base + IDX_ADDR(pcie)); -- return base + DATA_ADDR(pcie) + (where & 0x3); -+ return base + DATA_ADDR(pcie) + where; - } - - static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, -@@ -1238,20 +1285,6 @@ static int brcm_pcie_parse_map_dma_range - num_dma_ranges++; - } - -- for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { -- u64 size = brcmstb_memory_memc_size(i); -- -- if (size == (u64)-1) { -- dev_err(pcie->dev, "cannot get memc%d size", i); -- return -EINVAL; -- } else if (size) { -- scb_size[i] = roundup_pow_of_two_64(size); -- num_memc++; -- } else { -- break; -- } -- } -- - return 0; - } - -@@ -1275,26 +1308,25 @@ static int brcm_pcie_add_controller(stru - if (ret) - goto done; - -- /* Determine num_memc and their sizes */ -- for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { -- u64 size = brcmstb_memory_memc_size(i); -- -- if (size == (u64)-1) { -- dev_err(dev, "cannot get memc%d size\n", i); -- ret = -EINVAL; -- goto done; -- } else if (size) { -- scb_size[i] = roundup_pow_of_two_64(size); -- num_memc++; -- } else { -- break; -+ if (!num_dma_ranges) { -+ /* Determine num_memc and their sizes by other means */ -+ for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) { -+ u64 size = brcmstb_memory_memc_size(i); -+ -+ if (size == (u64)-1) { -+ dev_err(dev, "cannot get memc%d size\n", i); -+ ret = -EINVAL; -+ goto done; -+ } else if (size) { -+ scb_size[i] = roundup_pow_of_two_64(size); -+ } else { -+ break; -+ } - } -- } -- if (!ret && num_memc == 0) { -- ret = -EINVAL; -- goto done; -+ num_memc = i; - } - -+ g_pcie = pcie; - num_pcie++; - done: - mutex_unlock(&brcm_pcie_lock); -@@ -1307,6 +1339,7 @@ static void brcm_pcie_remove_controller( - if (--num_pcie > 0) - goto out; - -+ g_pcie = NULL; - if (brcm_unregister_notifier()) - dev_err(pcie->dev, "failed to unregister pci bus notifier\n"); - kfree(dma_ranges); -@@ -1367,7 +1400,7 @@ static int brcm_pcie_setup(struct brcm_p - void __iomem *base = pcie->base; - unsigned int scb_size_val; - u64 rc_bar2_offset, rc_bar2_size, total_mem_size = 0; -- u32 tmp, burst; -+ u32 tmp; - int i, j, ret, limit; - u16 nlw, cls, lnksta; - bool ssc_good = false; -@@ -1400,20 +1433,15 @@ static int brcm_pcie_setup(struct brcm_p - /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */ - tmp = INSERT_FIELD(0, PCIE_MISC_MISC_CTRL, SCB_ACCESS_EN, 1); - tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, CFG_READ_UR_MODE, 1); -- burst = (pcie->type == GENERIC || pcie->type == BCM7278) -- ? BURST_SIZE_512 : BURST_SIZE_256; -- tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE, burst); -+ tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE, -+ pcie->max_burst_size); - bcm_writel(tmp, base + PCIE_MISC_MISC_CTRL); - - /* - * Set up inbound memory view for the EP (called RC_BAR2, - * not to be confused with the BARs that are advertised by - * the EP). -- */ -- for (i = 0; i < num_memc; i++) -- total_mem_size += scb_size[i]; -- -- /* -+ * - * The PCIe host controller by design must set the inbound - * viewport to be a contiguous arrangement of all of the - * system's memory. In addition, its size mut be a power of -@@ -1429,55 +1457,49 @@ static int brcm_pcie_setup(struct brcm_p - * the controller will know to send outbound memory downstream - * and everything else upstream. - */ -- rc_bar2_size = roundup_pow_of_two_64(total_mem_size); - -- if (dma_ranges) { -+ if (num_dma_ranges) { - /* -- * The best-case scenario is to place the inbound -- * region in the first 4GB of pcie-space, as some -- * legacy devices can only address 32bits. -- * We would also like to put the MSI under 4GB -- * as well, since some devices require a 32bit -- * MSI target address. -+ * Use the base address and size(s) provided in the dma-ranges -+ * property. - */ -- if (total_mem_size <= 0xc0000000ULL && -- rc_bar2_size <= 0x100000000ULL) { -- rc_bar2_offset = 0; -- /* If the viewport is less then 4GB we can fit -- * the MSI target address under 4GB. Otherwise -- * put it right below 64GB. -- */ -- msi_target_addr = -- (rc_bar2_size == 0x100000000ULL) -- ? BRCM_MSI_TARGET_ADDR_GT_4GB -- : BRCM_MSI_TARGET_ADDR_LT_4GB; -- } else { -- /* -- * The system memory is 4GB or larger so we -- * cannot start the inbound region at location -- * 0 (since we have to allow some space for -- * outbound memory @ 3GB). So instead we -- * start it at the 1x multiple of its size -- */ -- rc_bar2_offset = rc_bar2_size; -- -- /* Since we are starting the viewport at 4GB or -- * higher, put the MSI target address below 4GB -- */ -- msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; -- } -- } else { -+ for (i = 0; i < num_dma_ranges; i++) -+ scb_size[i] = roundup_pow_of_two_64(dma_ranges[i].size); -+ -+ num_memc = num_dma_ranges; -+ rc_bar2_offset = dma_ranges[0].pci_addr; -+ } else if (num_memc) { - /* - * Set simple configuration based on memory sizes -- * only. We always start the viewport at address 0, -- * and set the MSI target address accordingly. -+ * only. We always start the viewport at address 0. - */ - rc_bar2_offset = 0; -+ } else { -+ return -EINVAL; -+ } -+ -+ for (i = 0; i < num_memc; i++) -+ total_mem_size += scb_size[i]; -+ -+ rc_bar2_size = roundup_pow_of_two_64(total_mem_size); - -- msi_target_addr = (rc_bar2_size >= 0x100000000ULL) -- ? BRCM_MSI_TARGET_ADDR_GT_4GB -- : BRCM_MSI_TARGET_ADDR_LT_4GB; -+ /* Verify the alignment is correct */ -+ if (rc_bar2_offset & (rc_bar2_size - 1)) { -+ dev_err(dev, "inbound window is misaligned\n"); -+ return -EINVAL; - } -+ -+ /* -+ * Position the MSI target low if possible. -+ * -+ * TO DO: Consider outbound window when choosing MSI target and -+ * verifying configuration. -+ */ -+ msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; -+ if (rc_bar2_offset <= msi_target_addr && -+ rc_bar2_offset + rc_bar2_size > msi_target_addr) -+ msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB; -+ - pcie->msi_target_addr = msi_target_addr; - - tmp = lower_32_bits(rc_bar2_offset); -@@ -1713,6 +1735,7 @@ static int brcm_pcie_probe(struct platfo - data = of_id->data; - pcie->reg_offsets = data->offsets; - pcie->reg_field_info = data->reg_field_info; -+ pcie->max_burst_size = data->max_burst_size; - pcie->type = data->type; - pcie->dn = dn; - pcie->dev = &pdev->dev; -@@ -1732,7 +1755,7 @@ static int brcm_pcie_probe(struct platfo - - pcie->clk = of_clk_get_by_name(dn, "sw_pcie"); - if (IS_ERR(pcie->clk)) { -- dev_err(&pdev->dev, "could not get clock\n"); -+ dev_warn(&pdev->dev, "could not get clock\n"); - pcie->clk = NULL; - } - pcie->base = base; -@@ -1755,7 +1778,8 @@ static int brcm_pcie_probe(struct platfo - - ret = clk_prepare_enable(pcie->clk); - if (ret) { -- dev_err(&pdev->dev, "could not enable clock\n"); -+ if (ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, "could not enable clock\n"); - return ret; - } - -@@ -1818,7 +1842,6 @@ static struct platform_driver brcm_pcie_ - .remove = brcm_pcie_remove, - .driver = { - .name = "brcm-pcie", -- .owner = THIS_MODULE, - .of_match_table = brcm_pcie_match, - .pm = &brcm_pcie_pm_ops, - }, ---- a/drivers/soc/bcm/brcmstb/Makefile -+++ b/drivers/soc/bcm/brcmstb/Makefile -@@ -1,2 +1,2 @@ --obj-y += common.o biuctrl.o -+obj-y += common.o biuctrl.o memory.o - obj-$(CONFIG_BRCMSTB_PM) += pm/ ---- /dev/null -+++ b/drivers/soc/bcm/brcmstb/memory.c -@@ -0,0 +1,158 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* Copyright © 2015-2017 Broadcom */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Macro to help extract property data */ -+#define DT_PROP_DATA_TO_U32(b, offs) (fdt32_to_cpu(*(u32 *)(b + offs))) -+ -+/* Constants used when retrieving memc info */ -+#define NUM_BUS_RANGES 10 -+#define BUS_RANGE_ULIMIT_SHIFT 4 -+#define BUS_RANGE_LLIMIT_SHIFT 4 -+#define BUS_RANGE_PA_SHIFT 12 -+ -+enum { -+ BUSNUM_MCP0 = 0x4, -+ BUSNUM_MCP1 = 0x5, -+ BUSNUM_MCP2 = 0x6, -+}; -+ -+/* -+ * If the DT nodes are handy, determine which MEMC holds the specified -+ * physical address. -+ */ -+#ifdef CONFIG_ARCH_BRCMSTB -+int __brcmstb_memory_phys_addr_to_memc(phys_addr_t pa, void __iomem *base) -+{ -+ int memc = -1; -+ int i; -+ -+ for (i = 0; i < NUM_BUS_RANGES; i++, base += 8) { -+ const u64 ulimit_raw = readl(base); -+ const u64 llimit_raw = readl(base + 4); -+ const u64 ulimit = -+ ((ulimit_raw >> BUS_RANGE_ULIMIT_SHIFT) -+ << BUS_RANGE_PA_SHIFT) | 0xfff; -+ const u64 llimit = (llimit_raw >> BUS_RANGE_LLIMIT_SHIFT) -+ << BUS_RANGE_PA_SHIFT; -+ const u32 busnum = (u32)(ulimit_raw & 0xf); -+ -+ if (pa >= llimit && pa <= ulimit) { -+ if (busnum >= BUSNUM_MCP0 && busnum <= BUSNUM_MCP2) { -+ memc = busnum - BUSNUM_MCP0; -+ break; -+ } -+ } -+ } -+ -+ return memc; -+} -+ -+int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa) -+{ -+ int memc = -1; -+ struct device_node *np; -+ void __iomem *cpubiuctrl; -+ -+ np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl"); -+ if (!np) -+ return memc; -+ -+ cpubiuctrl = of_iomap(np, 0); -+ if (!cpubiuctrl) -+ goto cleanup; -+ -+ memc = __brcmstb_memory_phys_addr_to_memc(pa, cpubiuctrl); -+ iounmap(cpubiuctrl); -+ -+cleanup: -+ of_node_put(np); -+ -+ return memc; -+} -+ -+#elif defined(CONFIG_MIPS) -+int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa) -+{ -+ /* The logic here is fairly simple and hardcoded: if pa <= 0x5000_0000, -+ * then this is MEMC0, else MEMC1. -+ * -+ * For systems with 2GB on MEMC0, MEMC1 starts at 9000_0000, with 1GB -+ * on MEMC0, MEMC1 starts at 6000_0000. -+ */ -+ if (pa >= 0x50000000ULL) -+ return 1; -+ else -+ return 0; -+} -+#endif -+ -+u64 brcmstb_memory_memc_size(int memc) -+{ -+ const void *fdt = initial_boot_params; -+ const int mem_offset = fdt_path_offset(fdt, "/memory"); -+ int addr_cells = 1, size_cells = 1; -+ const struct fdt_property *prop; -+ int proplen, cellslen; -+ u64 memc_size = 0; -+ int i; -+ -+ /* Get root size and address cells if specified */ -+ prop = fdt_get_property(fdt, 0, "#size-cells", &proplen); -+ if (prop) -+ size_cells = DT_PROP_DATA_TO_U32(prop->data, 0); -+ -+ prop = fdt_get_property(fdt, 0, "#address-cells", &proplen); -+ if (prop) -+ addr_cells = DT_PROP_DATA_TO_U32(prop->data, 0); -+ -+ if (mem_offset < 0) -+ return -1; -+ -+ prop = fdt_get_property(fdt, mem_offset, "reg", &proplen); -+ cellslen = (int)sizeof(u32) * (addr_cells + size_cells); -+ if ((proplen % cellslen) != 0) -+ return -1; -+ -+ for (i = 0; i < proplen / cellslen; ++i) { -+ u64 addr = 0; -+ u64 size = 0; -+ int memc_idx; -+ int j; -+ -+ for (j = 0; j < addr_cells; ++j) { -+ int offset = (cellslen * i) + (sizeof(u32) * j); -+ -+ addr |= (u64)DT_PROP_DATA_TO_U32(prop->data, offset) << -+ ((addr_cells - j - 1) * 32); -+ } -+ for (j = 0; j < size_cells; ++j) { -+ int offset = (cellslen * i) + -+ (sizeof(u32) * (j + addr_cells)); -+ -+ size |= (u64)DT_PROP_DATA_TO_U32(prop->data, offset) << -+ ((size_cells - j - 1) * 32); -+ } -+ -+ if ((phys_addr_t)addr != addr) { -+ pr_err("phys_addr_t is smaller than provided address 0x%llx!\n", -+ addr); -+ return -1; -+ } -+ -+ memc_idx = brcmstb_memory_phys_addr_to_memc((phys_addr_t)addr); -+ if (memc_idx == memc) -+ memc_size += size; -+ } -+ -+ return memc_size; -+} -+EXPORT_SYMBOL_GPL(brcmstb_memory_memc_size); -+ diff --git a/target/linux/brcm2708/patches-4.19/950-0532-arm-bcm2835-DMA-can-only-address-1GB.patch b/target/linux/brcm2708/patches-4.19/950-0532-arm-bcm2835-DMA-can-only-address-1GB.patch deleted file mode 100644 index 29942be1f5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0532-arm-bcm2835-DMA-can-only-address-1GB.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 9334afe7293b3a78b7e070a70880b2db7aa98365 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 29 May 2019 15:47:42 +0100 -Subject: [PATCH 532/806] arm: bcm2835: DMA can only address 1GB - -The legacy peripherals can only address the first gigabyte of RAM, so -ensure that DMA allocations are restricted to that region. - -Signed-off-by: Phil Elwell ---- - arch/arm/mach-bcm/board_bcm2835.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/arm/mach-bcm/board_bcm2835.c -+++ b/arch/arm/mach-bcm/board_bcm2835.c -@@ -123,6 +123,9 @@ static const char * const bcm2835_compat - }; - - DT_MACHINE_START(BCM2835, "BCM2835") -+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) -+ .dma_zone_size = SZ_1G, -+#endif - .map_io = bcm2835_map_io, - .init_machine = bcm2835_init, - .dt_compat = bcm2835_compat, diff --git a/target/linux/brcm2708/patches-4.19/950-0532-drm-v3d-Add-support-for-2711.patch b/target/linux/brcm2708/patches-4.19/950-0532-drm-v3d-Add-support-for-2711.patch new file mode 100644 index 0000000000..1d723db61d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0532-drm-v3d-Add-support-for-2711.patch @@ -0,0 +1,20 @@ +From ffd9543f2d74e9215996ce6500fc34dcf7976462 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 4 Oct 2018 17:22:43 -0700 +Subject: [PATCH] drm/v3d: Add support for 2711. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/v3d/v3d_drv.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/gpu/drm/v3d/v3d_drv.c ++++ b/drivers/gpu/drm/v3d/v3d_drv.c +@@ -235,6 +235,7 @@ static struct drm_driver v3d_drm_driver + static const struct of_device_id v3d_of_match[] = { + { .compatible = "brcm,7268-v3d" }, + { .compatible = "brcm,7278-v3d" }, ++ { .compatible = "brcm,2711-v3d" }, + {}, + }; + MODULE_DEVICE_TABLE(of, v3d_of_match); diff --git a/target/linux/brcm2708/patches-4.19/950-0533-drm-v3d-Skip-MMU-flush-if-the-device-is-currently-of.patch b/target/linux/brcm2708/patches-4.19/950-0533-drm-v3d-Skip-MMU-flush-if-the-device-is-currently-of.patch new file mode 100644 index 0000000000..57f8e508c6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0533-drm-v3d-Skip-MMU-flush-if-the-device-is-currently-of.patch @@ -0,0 +1,52 @@ +From f389abea861f9bd3165f98a8d3a1f3407e9fc01a Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 14 Jan 2019 12:35:43 -0800 +Subject: [PATCH] drm/v3d: Skip MMU flush if the device is currently + off. + +If it's off, we know it will be reset on poweron, so the MMU won't +have any TLB cached from before this point. Avoids failed waits for +MMU flush to reply. + +Signed-off-by: Eric Anholt +(cherry picked from commit 3ee4e2e0a9e9587eacbb69b067bbc72ab2cdc47b) +--- + drivers/gpu/drm/v3d/v3d_mmu.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/gpu/drm/v3d/v3d_mmu.c ++++ b/drivers/gpu/drm/v3d/v3d_mmu.c +@@ -18,6 +18,8 @@ + * each client. This is not yet implemented. + */ + ++#include ++ + #include "v3d_drv.h" + #include "v3d_regs.h" + +@@ -34,6 +36,14 @@ static int v3d_mmu_flush_all(struct v3d_ + { + int ret; + ++ /* Keep power on the device on until we're done with this ++ * call, but skip the flush if the device is off and will be ++ * reset when powered back on. ++ */ ++ ret = pm_runtime_get_if_in_use(v3d->dev); ++ if (ret == 0) ++ return 0; ++ + /* Make sure that another flush isn't already running when we + * start this one. + */ +@@ -61,6 +71,9 @@ static int v3d_mmu_flush_all(struct v3d_ + if (ret) + dev_err(v3d->dev, "MMUC flush wait idle failed\n"); + ++ pm_runtime_mark_last_busy(v3d->dev); ++ pm_runtime_put_autosuspend(v3d->dev); ++ + return ret; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0533-mmc-bcm2835-sdhost-Support-64-bit-physical-addresses.patch b/target/linux/brcm2708/patches-4.19/950-0533-mmc-bcm2835-sdhost-Support-64-bit-physical-addresses.patch deleted file mode 100644 index bf0b19b30e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0533-mmc-bcm2835-sdhost-Support-64-bit-physical-addresses.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 8a58288d710a817b5dc7747f0bec1fb167368e7e Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 29 Aug 2018 09:05:15 +0100 -Subject: [PATCH 533/806] mmc: bcm2835-sdhost: Support 64-bit physical - addresses - -Signed-off-by: Phil Elwell ---- - drivers/mmc/host/bcm2835-sdhost.c | 10 ++++++---- - 1 file changed, 6 insertions(+), 4 deletions(-) - ---- a/drivers/mmc/host/bcm2835-sdhost.c -+++ b/drivers/mmc/host/bcm2835-sdhost.c -@@ -148,7 +148,7 @@ struct bcm2835_host { - spinlock_t lock; - - void __iomem *ioaddr; -- u32 bus_addr; -+ phys_addr_t bus_addr; - - struct mmc_host *mmc; - -@@ -246,8 +246,8 @@ static void log_init(struct device *dev, - sdhost_log_buf = dma_zalloc_coherent(dev, LOG_SIZE, &sdhost_log_addr, - GFP_KERNEL); - if (sdhost_log_buf) { -- pr_info("sdhost: log_buf @ %p (%x)\n", -- sdhost_log_buf, (u32)sdhost_log_addr); -+ pr_info("sdhost: log_buf @ %p (%llx)\n", -+ sdhost_log_buf, (u64)sdhost_log_addr); - timer_base = ioremap_nocache(bus_to_phys + 0x7e003000, SZ_4K); - if (!timer_base) - pr_err("sdhost: failed to remap timer\n"); -@@ -2024,6 +2024,7 @@ static int bcm2835_sdhost_probe(struct p - struct mmc_host *mmc; - const __be32 *addr; - u32 msg[3]; -+ int na; - int ret; - - pr_debug("bcm2835_sdhost_probe\n"); -@@ -2047,12 +2048,13 @@ static int bcm2835_sdhost_probe(struct p - goto err; - } - -+ na = of_n_addr_cells(node); - addr = of_get_address(node, 0, NULL, NULL); - if (!addr) { - dev_err(dev, "could not get DMA-register address\n"); - return -ENODEV; - } -- host->bus_addr = be32_to_cpup(addr); -+ host->bus_addr = (phys_addr_t)of_read_number(addr, na); - pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", - (unsigned long)host->ioaddr, - (unsigned long)iomem->start, diff --git a/target/linux/brcm2708/patches-4.19/950-0534-drm-v3d-Hook-up-the-runtime-PM-ops.patch b/target/linux/brcm2708/patches-4.19/950-0534-drm-v3d-Hook-up-the-runtime-PM-ops.patch new file mode 100644 index 0000000000..3286cd0fbd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0534-drm-v3d-Hook-up-the-runtime-PM-ops.patch @@ -0,0 +1,34 @@ +From 30dd82d785715b2ed52a5079595ffcd2ec1f728d Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 14 Jan 2019 14:47:57 -0800 +Subject: [PATCH] drm/v3d: Hook up the runtime PM ops. + +In translating the runtime PM code from vc4, I missed the ".pm" +assignment to actually connect them up. Fixes missing MMU setup if +runtime PM resets V3D. + +Signed-off-by: Eric Anholt +(cherry picked from commit ca197699af29baa8236c74c53d4904ca8957ee06) +--- + drivers/gpu/drm/v3d/v3d_drv.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/v3d/v3d_drv.c ++++ b/drivers/gpu/drm/v3d/v3d_drv.c +@@ -66,7 +66,7 @@ static int v3d_runtime_resume(struct dev + } + #endif + +-static const struct dev_pm_ops v3d_v3d_pm_ops = { ++static const struct dev_pm_ops v3d_pm_ops = { + SET_RUNTIME_PM_OPS(v3d_runtime_suspend, v3d_runtime_resume, NULL) + }; + +@@ -371,6 +371,7 @@ static struct platform_driver v3d_platfo + .driver = { + .name = "v3d", + .of_match_table = v3d_of_match, ++ .pm = &v3d_pm_ops, + }, + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0534-mmc-sdhci-Mask-spurious-interrupts.patch b/target/linux/brcm2708/patches-4.19/950-0534-mmc-sdhci-Mask-spurious-interrupts.patch deleted file mode 100644 index b55c153997..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0534-mmc-sdhci-Mask-spurious-interrupts.patch +++ /dev/null @@ -1,29 +0,0 @@ -From be309b7db77215610d5ac15bf0aacd47ea5b3433 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 28 Sep 2018 16:24:05 +0100 -Subject: [PATCH 534/806] mmc: sdhci: Mask "spurious" interrupts - -Add a filter for "spurious" Transfer Complete interrupts, attempting -to make it as specific as possible: -* INT_DATA_END (transfer complete) is set -* There is a stop command in progress -* There is no data transfer in progress - -Signed-off-by: Phil Elwell ---- - drivers/mmc/host/sdhci.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/mmc/host/sdhci.c -+++ b/drivers/mmc/host/sdhci.c -@@ -2937,6 +2937,10 @@ static irqreturn_t sdhci_irq(int irq, vo - result = IRQ_WAKE_THREAD; - } - -+ if ((intmask & SDHCI_INT_DATA_END) && !host->data && -+ host->cmd && (host->cmd == host->cmd->mrq->stop)) -+ intmask &= ~SDHCI_INT_DATA_END; -+ - if (intmask & SDHCI_INT_CMD_MASK) - sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK, &intmask); - diff --git a/target/linux/brcm2708/patches-4.19/950-0535-drm-v3d-HACK-gut-runtime-pm-for-now.patch b/target/linux/brcm2708/patches-4.19/950-0535-drm-v3d-HACK-gut-runtime-pm-for-now.patch new file mode 100644 index 0000000000..654ef432f3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0535-drm-v3d-HACK-gut-runtime-pm-for-now.patch @@ -0,0 +1,172 @@ +From 2d4f38abdc2a919d8002fbec7bc0be7c1312786a Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 14 Jan 2019 15:13:17 -0800 +Subject: [PATCH] drm/v3d: HACK: gut runtime pm for now. + +Something is still unstable -- on starting a new glxgears from an idle +X11, I get an MMU violation in high addresses. The CTS also failed +quite quickly. With this, CTS progresses for an hour before OOMing +(allocating some big buffers when my board only has 600MB available to +Linux) + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/v3d/v3d_debugfs.c | 16 +--------------- + drivers/gpu/drm/v3d/v3d_drv.c | 7 ------- + drivers/gpu/drm/v3d/v3d_gem.c | 20 -------------------- + 3 files changed, 1 insertion(+), 42 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_debugfs.c ++++ b/drivers/gpu/drm/v3d/v3d_debugfs.c +@@ -4,7 +4,6 @@ + #include + #include + #include +-#include + #include + #include + +@@ -100,11 +99,8 @@ static int v3d_v3d_debugfs_ident(struct + struct drm_device *dev = node->minor->dev; + struct v3d_dev *v3d = to_v3d_dev(dev); + u32 ident0, ident1, ident2, ident3, cores; +- int ret, core; ++ int core; + +- ret = pm_runtime_get_sync(v3d->dev); +- if (ret < 0) +- return ret; + + ident0 = V3D_READ(V3D_HUB_IDENT0); + ident1 = V3D_READ(V3D_HUB_IDENT1); +@@ -157,9 +153,6 @@ static int v3d_v3d_debugfs_ident(struct + (misccfg & V3D_MISCCFG_OVRTMUOUT) != 0); + } + +- pm_runtime_mark_last_busy(v3d->dev); +- pm_runtime_put_autosuspend(v3d->dev); +- + return 0; + } + +@@ -187,11 +180,6 @@ static int v3d_measure_clock(struct seq_ + uint32_t cycles; + int core = 0; + int measure_ms = 1000; +- int ret; +- +- ret = pm_runtime_get_sync(v3d->dev); +- if (ret < 0) +- return ret; + + if (v3d->ver >= 40) { + V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3, +@@ -215,8 +203,6 @@ static int v3d_measure_clock(struct seq_ + cycles / (measure_ms * 1000), + (cycles / (measure_ms * 100)) % 10); + +- pm_runtime_mark_last_busy(v3d->dev); +- pm_runtime_put_autosuspend(v3d->dev); + + return 0; + } +--- a/drivers/gpu/drm/v3d/v3d_drv.c ++++ b/drivers/gpu/drm/v3d/v3d_drv.c +@@ -75,7 +75,6 @@ static int v3d_get_param_ioctl(struct dr + { + struct v3d_dev *v3d = to_v3d_dev(dev); + struct drm_v3d_get_param *args = data; +- int ret; + static const u32 reg_map[] = { + [DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG, + [DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1, +@@ -101,15 +100,12 @@ static int v3d_get_param_ioctl(struct dr + if (args->value != 0) + return -EINVAL; + +- ret = pm_runtime_get_sync(v3d->dev); + if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 && + args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) { + args->value = V3D_CORE_READ(0, offset); + } else { + args->value = V3D_READ(offset); + } +- pm_runtime_mark_last_busy(v3d->dev); +- pm_runtime_put_autosuspend(v3d->dev); + return 0; + } + +@@ -311,9 +307,6 @@ static int v3d_platform_drm_probe(struct + goto dev_free; + } + +- pm_runtime_use_autosuspend(dev); +- pm_runtime_set_autosuspend_delay(dev, 50); +- pm_runtime_enable(dev); + + ret = drm_dev_init(&v3d->drm, &v3d_drm_driver, dev); + if (ret) +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -375,7 +375,6 @@ v3d_exec_cleanup(struct kref *ref) + { + struct v3d_exec_info *exec = container_of(ref, struct v3d_exec_info, + refcount); +- struct v3d_dev *v3d = exec->v3d; + unsigned int i; + struct v3d_bo *bo, *save; + +@@ -396,9 +395,6 @@ v3d_exec_cleanup(struct kref *ref) + drm_gem_object_put_unlocked(&bo->base); + } + +- pm_runtime_mark_last_busy(v3d->dev); +- pm_runtime_put_autosuspend(v3d->dev); +- + kfree(exec); + } + +@@ -412,7 +408,6 @@ v3d_tfu_job_cleanup(struct kref *ref) + { + struct v3d_tfu_job *job = container_of(ref, struct v3d_tfu_job, + refcount); +- struct v3d_dev *v3d = job->v3d; + unsigned int i; + + dma_fence_put(job->in_fence); +@@ -423,9 +418,6 @@ v3d_tfu_job_cleanup(struct kref *ref) + drm_gem_object_put_unlocked(&job->bo[i]->base); + } + +- pm_runtime_mark_last_busy(v3d->dev); +- pm_runtime_put_autosuspend(v3d->dev); +- + kfree(job); + } + +@@ -519,12 +511,6 @@ v3d_submit_cl_ioctl(struct drm_device *d + if (!exec) + return -ENOMEM; + +- ret = pm_runtime_get_sync(v3d->dev); +- if (ret < 0) { +- kfree(exec); +- return ret; +- } +- + kref_init(&exec->refcount); + + ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl, +@@ -643,12 +629,6 @@ v3d_submit_tfu_ioctl(struct drm_device * + if (!job) + return -ENOMEM; + +- ret = pm_runtime_get_sync(v3d->dev); +- if (ret < 0) { +- kfree(job); +- return ret; +- } +- + kref_init(&job->refcount); + + ret = drm_syncobj_find_fence(file_priv, args->in_sync, diff --git a/target/linux/brcm2708/patches-4.19/950-0535-mmc-sdhci-iproc-Add-support-for-emmc2-of-the-BCM2838.patch b/target/linux/brcm2708/patches-4.19/950-0535-mmc-sdhci-iproc-Add-support-for-emmc2-of-the-BCM2838.patch deleted file mode 100644 index 14b4289696..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0535-mmc-sdhci-iproc-Add-support-for-emmc2-of-the-BCM2838.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 0a1c3ff378e60f2a59153cfc1c7529bfe05eb115 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 27 Apr 2019 12:33:57 +0200 -Subject: [PATCH 535/806] mmc: sdhci-iproc: Add support for emmc2 of the - BCM2838 - -The emmc2 interface of the BCM2838 should be integrated in sdhci-iproc -to avoid code redundancy. Except 32 bit only access no other quirks are -known yet. Add an additional compatible string for upstream proposal. - -Signed-off-by: Stefan Wahren ---- - drivers/mmc/host/sdhci-iproc.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/mmc/host/sdhci-iproc.c -+++ b/drivers/mmc/host/sdhci-iproc.c -@@ -250,8 +250,18 @@ static const struct sdhci_iproc_data bcm - .mmc_caps = 0x00000000, - }; - -+static const struct sdhci_pltfm_data sdhci_bcm2838_pltfm_data = { -+ .ops = &sdhci_iproc_32only_ops, -+}; -+ -+static const struct sdhci_iproc_data bcm2838_data = { -+ .pdata = &sdhci_bcm2838_pltfm_data, -+}; -+ - static const struct of_device_id sdhci_iproc_of_match[] = { - { .compatible = "brcm,bcm2835-sdhci", .data = &bcm2835_data }, -+ { .compatible = "brcm,bcm2838-sdhci", .data = &bcm2838_data }, -+ { .compatible = "brcm,bcm2711-emmc2", .data = &bcm2838_data }, - { .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_cygnus_data}, - { .compatible = "brcm,sdhci-iproc", .data = &iproc_data }, - { } diff --git a/target/linux/brcm2708/patches-4.19/950-0536-drm-v3d-Update-to-upstream-IRQ-code.patch b/target/linux/brcm2708/patches-4.19/950-0536-drm-v3d-Update-to-upstream-IRQ-code.patch new file mode 100644 index 0000000000..3c15cc1915 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0536-drm-v3d-Update-to-upstream-IRQ-code.patch @@ -0,0 +1,59 @@ +From 50088003d803f04e536eb09ac2635df35b5c8ae4 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Tue, 12 Mar 2019 09:08:10 -0700 +Subject: [PATCH] drm/v3d: Update to upstream IRQ code. + +--- + drivers/gpu/drm/v3d/v3d_irq.c | 25 +++++++++++++++---------- + 1 file changed, 15 insertions(+), 10 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_irq.c ++++ b/drivers/gpu/drm/v3d/v3d_irq.c +@@ -168,7 +168,7 @@ v3d_hub_irq(int irq, void *arg) + int + v3d_irq_init(struct v3d_dev *v3d) + { +- int ret, core; ++ int irq1, ret, core; + + INIT_WORK(&v3d->overflow_mem_work, v3d_overflow_mem_work); + +@@ -179,24 +179,29 @@ v3d_irq_init(struct v3d_dev *v3d) + V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS); + V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS); + +- if (platform_get_irq(v3d->pdev, 1) < 0) { +- ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), ++ irq1 = platform_get_irq(v3d->pdev, 1); ++ if (irq1 == -EPROBE_DEFER) ++ return irq1; ++ if (irq1 > 0) { ++ ret = devm_request_irq(v3d->dev, irq1, + v3d_irq, IRQF_SHARED, +- "v3d", v3d); +- v3d->single_irq_line = true; +- } else { ++ "v3d_core0", v3d); ++ if (ret) ++ goto fail; + ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), + v3d_hub_irq, IRQF_SHARED, + "v3d_hub", v3d); + if (ret) + goto fail; ++ } else { ++ v3d->single_irq_line = true; + +- ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 1), ++ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), + v3d_irq, IRQF_SHARED, +- "v3d_core0", v3d); ++ "v3d", v3d); ++ if (ret) ++ goto fail; + } +- if (ret) +- goto fail; + + v3d_irq_enable(v3d); + return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0536-hwrng-iproc-rng200-Add-BCM2838-support.patch b/target/linux/brcm2708/patches-4.19/950-0536-hwrng-iproc-rng200-Add-BCM2838-support.patch deleted file mode 100644 index daa10d10be..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0536-hwrng-iproc-rng200-Add-BCM2838-support.patch +++ /dev/null @@ -1,158 +0,0 @@ -From e9c0fd87b6169baf5bd10293a85675d505086191 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 4 May 2019 17:06:15 +0200 -Subject: [PATCH 536/806] hwrng: iproc-rng200: Add BCM2838 support - -The HWRNG on the BCM2838 is compatible to iproc-rng200, so add the -support to this driver instead of bcm2835-rng. - -Signed-off-by: Stefan Wahren ---- - drivers/char/hw_random/Kconfig | 4 +- - drivers/char/hw_random/iproc-rng200.c | 81 +++++++++++++++++++++++++-- - 2 files changed, 79 insertions(+), 6 deletions(-) - ---- a/drivers/char/hw_random/Kconfig -+++ b/drivers/char/hw_random/Kconfig -@@ -89,11 +89,11 @@ config HW_RANDOM_BCM2835 - - config HW_RANDOM_IPROC_RNG200 - tristate "Broadcom iProc/STB RNG200 support" -- depends on ARCH_BCM_IPROC || ARCH_BRCMSTB -+ depends on ARCH_BCM_IPROC || ARCH_BCM2835 || ARCH_BRCMSTB - default HW_RANDOM - ---help--- - This driver provides kernel-side support for the RNG200 -- hardware found on the Broadcom iProc and STB SoCs. -+ hardware found on the Broadcom iProc, BCM2838 and STB SoCs. - - To compile this driver as a module, choose M here: the - module will be called iproc-rng200 ---- a/drivers/char/hw_random/iproc-rng200.c -+++ b/drivers/char/hw_random/iproc-rng200.c -@@ -29,6 +29,7 @@ - #define RNG_CTRL_RNG_RBGEN_MASK 0x00001FFF - #define RNG_CTRL_RNG_RBGEN_ENABLE 0x00000001 - #define RNG_CTRL_RNG_RBGEN_DISABLE 0x00000000 -+#define RNG_CTRL_RNG_DIV_CTRL_SHIFT 13 - - #define RNG_SOFT_RESET_OFFSET 0x04 - #define RNG_SOFT_RESET 0x00000001 -@@ -36,16 +37,23 @@ - #define RBG_SOFT_RESET_OFFSET 0x08 - #define RBG_SOFT_RESET 0x00000001 - -+#define RNG_TOTAL_BIT_COUNT_OFFSET 0x0C -+ -+#define RNG_TOTAL_BIT_COUNT_THRESHOLD_OFFSET 0x10 -+ - #define RNG_INT_STATUS_OFFSET 0x18 - #define RNG_INT_STATUS_MASTER_FAIL_LOCKOUT_IRQ_MASK 0x80000000 - #define RNG_INT_STATUS_STARTUP_TRANSITIONS_MET_IRQ_MASK 0x00020000 - #define RNG_INT_STATUS_NIST_FAIL_IRQ_MASK 0x00000020 - #define RNG_INT_STATUS_TOTAL_BITS_COUNT_IRQ_MASK 0x00000001 - -+#define RNG_INT_ENABLE_OFFSET 0x1C -+ - #define RNG_FIFO_DATA_OFFSET 0x20 - - #define RNG_FIFO_COUNT_OFFSET 0x24 - #define RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK 0x000000FF -+#define RNG_FIFO_COUNT_RNG_FIFO_THRESHOLD_SHIFT 8 - - struct iproc_rng200_dev { - struct hwrng rng; -@@ -166,6 +174,64 @@ static int iproc_rng200_init(struct hwrn - return 0; - } - -+static int bcm2838_rng200_read(struct hwrng *rng, void *buf, size_t max, -+ bool wait) -+{ -+ struct iproc_rng200_dev *priv = to_rng_priv(rng); -+ u32 max_words = max / sizeof(u32); -+ u32 num_words, count, val; -+ -+ /* ensure warm up period has elapsed */ -+ while (1) { -+ val = ioread32(priv->base + RNG_TOTAL_BIT_COUNT_OFFSET); -+ if (val > 16) -+ break; -+ cpu_relax(); -+ } -+ -+ /* ensure fifo is not empty */ -+ while (1) { -+ num_words = ioread32(priv->base + RNG_FIFO_COUNT_OFFSET) & -+ RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK; -+ if (num_words) -+ break; -+ if (!wait) -+ return 0; -+ cpu_relax(); -+ } -+ -+ if (num_words > max_words) -+ num_words = max_words; -+ -+ for (count = 0; count < num_words; count++) { -+ ((u32 *)buf)[count] = ioread32(priv->base + -+ RNG_FIFO_DATA_OFFSET); -+ } -+ -+ return num_words * sizeof(u32); -+} -+ -+static int bcm2838_rng200_init(struct hwrng *rng) -+{ -+ struct iproc_rng200_dev *priv = to_rng_priv(rng); -+ uint32_t val; -+ -+ if (ioread32(priv->base + RNG_CTRL_OFFSET) & RNG_CTRL_RNG_RBGEN_MASK) -+ return 0; -+ -+ /* initial numbers generated are "less random" so will be discarded */ -+ val = 0x40000; -+ iowrite32(val, priv->base + RNG_TOTAL_BIT_COUNT_THRESHOLD_OFFSET); -+ /* min fifo count to generate full interrupt */ -+ val = 2 << RNG_FIFO_COUNT_RNG_FIFO_THRESHOLD_SHIFT; -+ iowrite32(val, priv->base + RNG_FIFO_COUNT_OFFSET); -+ /* enable the rng - 1Mhz sample rate */ -+ val = (0x3 << RNG_CTRL_RNG_DIV_CTRL_SHIFT) | RNG_CTRL_RNG_RBGEN_MASK; -+ iowrite32(val, priv->base + RNG_CTRL_OFFSET); -+ -+ return 0; -+} -+ - static void iproc_rng200_cleanup(struct hwrng *rng) - { - struct iproc_rng200_dev *priv = to_rng_priv(rng); -@@ -202,10 +268,16 @@ static int iproc_rng200_probe(struct pla - return PTR_ERR(priv->base); - } - -- priv->rng.name = "iproc-rng200", -- priv->rng.read = iproc_rng200_read, -- priv->rng.init = iproc_rng200_init, -- priv->rng.cleanup = iproc_rng200_cleanup, -+ priv->rng.name = pdev->name; -+ priv->rng.cleanup = iproc_rng200_cleanup; -+ -+ if (of_device_is_compatible(dev->of_node, "brcm,bcm2838-rng200")) { -+ priv->rng.init = bcm2838_rng200_init; -+ priv->rng.read = bcm2838_rng200_read; -+ } else { -+ priv->rng.init = iproc_rng200_init; -+ priv->rng.read = iproc_rng200_read; -+ } - - /* Register driver */ - ret = devm_hwrng_register(dev, &priv->rng); -@@ -222,6 +294,7 @@ static int iproc_rng200_probe(struct pla - static const struct of_device_id iproc_rng200_of_match[] = { - { .compatible = "brcm,bcm7278-rng200", }, - { .compatible = "brcm,iproc-rng200", }, -+ { .compatible = "brcm,bcm2838-rng200"}, - {}, - }; - MODULE_DEVICE_TABLE(of, iproc_rng200_of_match); diff --git a/target/linux/brcm2708/patches-4.19/950-0537-drm-v3d-Rename-the-fence-signaled-from-IRQs-to-irq_f.patch b/target/linux/brcm2708/patches-4.19/950-0537-drm-v3d-Rename-the-fence-signaled-from-IRQs-to-irq_f.patch new file mode 100644 index 0000000000..55408a0042 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0537-drm-v3d-Rename-the-fence-signaled-from-IRQs-to-irq_f.patch @@ -0,0 +1,117 @@ +From 0d00e0340c1aa9ce36bdff46f927916fe4903cee Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 27 Dec 2018 14:04:44 -0800 +Subject: [PATCH] drm/v3d: Rename the fence signaled from IRQs to + "irq_fence". + +We have another thing called the "done fence" that tracks when the +scheduler considers the job done, and having the shared name was +confusing. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/v3d/v3d_drv.h | 4 ++-- + drivers/gpu/drm/v3d/v3d_gem.c | 6 +++--- + drivers/gpu/drm/v3d/v3d_irq.c | 6 +++--- + drivers/gpu/drm/v3d/v3d_sched.c | 12 ++++++------ + 4 files changed, 14 insertions(+), 14 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -182,7 +182,7 @@ struct v3d_job { + struct dma_fence *in_fence; + + /* v3d fence to be signaled by IRQ handler when the job is complete. */ +- struct dma_fence *done_fence; ++ struct dma_fence *irq_fence; + + /* GPU virtual addresses of the start/end of the CL job. */ + u32 start, end; +@@ -229,7 +229,7 @@ struct v3d_tfu_job { + struct dma_fence *in_fence; + + /* v3d fence to be signaled by IRQ handler when the job is complete. */ +- struct dma_fence *done_fence; ++ struct dma_fence *irq_fence; + + struct v3d_dev *v3d; + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -381,8 +381,8 @@ v3d_exec_cleanup(struct kref *ref) + dma_fence_put(exec->bin.in_fence); + dma_fence_put(exec->render.in_fence); + +- dma_fence_put(exec->bin.done_fence); +- dma_fence_put(exec->render.done_fence); ++ dma_fence_put(exec->bin.irq_fence); ++ dma_fence_put(exec->render.irq_fence); + + dma_fence_put(exec->bin_done_fence); + dma_fence_put(exec->render_done_fence); +@@ -411,7 +411,7 @@ v3d_tfu_job_cleanup(struct kref *ref) + unsigned int i; + + dma_fence_put(job->in_fence); +- dma_fence_put(job->done_fence); ++ dma_fence_put(job->irq_fence); + + for (i = 0; i < ARRAY_SIZE(job->bo); i++) { + if (job->bo[i]) +--- a/drivers/gpu/drm/v3d/v3d_irq.c ++++ b/drivers/gpu/drm/v3d/v3d_irq.c +@@ -93,7 +93,7 @@ v3d_irq(int irq, void *arg) + + if (intsts & V3D_INT_FLDONE) { + struct v3d_fence *fence = +- to_v3d_fence(v3d->bin_job->bin.done_fence); ++ to_v3d_fence(v3d->bin_job->bin.irq_fence); + + trace_v3d_bcl_irq(&v3d->drm, fence->seqno); + dma_fence_signal(&fence->base); +@@ -102,7 +102,7 @@ v3d_irq(int irq, void *arg) + + if (intsts & V3D_INT_FRDONE) { + struct v3d_fence *fence = +- to_v3d_fence(v3d->render_job->render.done_fence); ++ to_v3d_fence(v3d->render_job->render.irq_fence); + + trace_v3d_rcl_irq(&v3d->drm, fence->seqno); + dma_fence_signal(&fence->base); +@@ -138,7 +138,7 @@ v3d_hub_irq(int irq, void *arg) + + if (intsts & V3D_HUB_INT_TFUC) { + struct v3d_fence *fence = +- to_v3d_fence(v3d->tfu_job->done_fence); ++ to_v3d_fence(v3d->tfu_job->irq_fence); + + trace_v3d_tfu_irq(&v3d->drm, fence->seqno); + dma_fence_signal(&fence->base); +--- a/drivers/gpu/drm/v3d/v3d_sched.c ++++ b/drivers/gpu/drm/v3d/v3d_sched.c +@@ -152,9 +152,9 @@ static struct dma_fence *v3d_job_run(str + if (IS_ERR(fence)) + return NULL; + +- if (job->done_fence) +- dma_fence_put(job->done_fence); +- job->done_fence = dma_fence_get(fence); ++ if (job->irq_fence) ++ dma_fence_put(job->irq_fence); ++ job->irq_fence = dma_fence_get(fence); + + trace_v3d_submit_cl(dev, q == V3D_RENDER, to_v3d_fence(fence)->seqno, + job->start, job->end); +@@ -195,9 +195,9 @@ v3d_tfu_job_run(struct drm_sched_job *sc + return NULL; + + v3d->tfu_job = job; +- if (job->done_fence) +- dma_fence_put(job->done_fence); +- job->done_fence = dma_fence_get(fence); ++ if (job->irq_fence) ++ dma_fence_put(job->irq_fence); ++ job->irq_fence = dma_fence_get(fence); + + trace_v3d_submit_tfu(dev, to_v3d_fence(fence)->seqno); + diff --git a/target/linux/brcm2708/patches-4.19/950-0537-thermal-brcmstb_thermal-Add-BCM2838-support.patch b/target/linux/brcm2708/patches-4.19/950-0537-thermal-brcmstb_thermal-Add-BCM2838-support.patch deleted file mode 100644 index 5a59adc788..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0537-thermal-brcmstb_thermal-Add-BCM2838-support.patch +++ /dev/null @@ -1,162 +0,0 @@ -From d49649e2dcf0d5775e92677d37e229e0387fe82a Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sat, 18 May 2019 12:26:11 +0200 -Subject: [PATCH 537/806] thermal: brcmstb_thermal: Add BCM2838 support - -The BCM2838 has an AVS TMON hardware block. This adds the necessary -support to the brcmstb_thermal driver ( no trip handling ). - -Signed-off-by: Stefan Wahren ---- - drivers/thermal/broadcom/Kconfig | 2 +- - drivers/thermal/broadcom/brcmstb_thermal.c | 65 +++++++++++++++++++--- - 2 files changed, 58 insertions(+), 9 deletions(-) - ---- a/drivers/thermal/broadcom/Kconfig -+++ b/drivers/thermal/broadcom/Kconfig -@@ -8,7 +8,7 @@ config BCM2835_THERMAL - - config BRCMSTB_THERMAL - tristate "Broadcom STB AVS TMON thermal driver" -- depends on ARCH_BRCMSTB || COMPILE_TEST -+ depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST - help - Enable this driver if you have a Broadcom STB SoC and would like - thermal framework support. ---- a/drivers/thermal/broadcom/brcmstb_thermal.c -+++ b/drivers/thermal/broadcom/brcmstb_thermal.c -@@ -19,6 +19,7 @@ - #define pr_fmt(fmt) DRV_NAME ": " fmt - - #include -+#include - #include - #include - #include -@@ -31,9 +32,6 @@ - #include - - #define AVS_TMON_STATUS 0x00 -- #define AVS_TMON_STATUS_valid_msk BIT(11) -- #define AVS_TMON_STATUS_data_msk GENMASK(10, 1) -- #define AVS_TMON_STATUS_data_shift 1 - - #define AVS_TMON_EN_OVERTEMP_RESET 0x04 - #define AVS_TMON_EN_OVERTEMP_RESET_msk BIT(0) -@@ -111,10 +109,19 @@ static struct avs_tmon_trip avs_tmon_tri - }, - }; - -+struct brcmstb_thermal_of_data { -+ const struct thermal_zone_of_device_ops *of_ops; -+ u32 status_valid_mask; -+ u32 status_data_mask; -+ u32 status_data_shift; -+}; -+ - struct brcmstb_thermal_priv { - void __iomem *tmon_base; - struct device *dev; - struct thermal_zone_device *thermal; -+ struct clk *clk; -+ const struct brcmstb_thermal_of_data *socdata; - }; - - static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope, -@@ -164,17 +171,18 @@ static inline u32 avs_tmon_temp_to_code( - static int brcmstb_get_temp(void *data, int *temp) - { - struct brcmstb_thermal_priv *priv = data; -+ const struct brcmstb_thermal_of_data *socdata = priv->socdata; - u32 val; - long t; - - val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS); - -- if (!(val & AVS_TMON_STATUS_valid_msk)) { -+ if (!(val & socdata->status_valid_mask)) { - dev_err(priv->dev, "reading not valid\n"); - return -EIO; - } - -- val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift; -+ val = (val & socdata->status_data_mask) >> socdata->status_data_shift; - - t = avs_tmon_code_to_temp(priv->thermal, val); - if (t < 0) -@@ -299,13 +307,34 @@ static int brcmstb_set_trips(void *data, - return 0; - } - --static struct thermal_zone_of_device_ops of_ops = { -+static const struct thermal_zone_of_device_ops bcm7445_thermal_of_ops = { - .get_temp = brcmstb_get_temp, - .set_trips = brcmstb_set_trips, - }; - -+static const struct thermal_zone_of_device_ops bcm2838_thermal_of_ops = { -+ .get_temp = brcmstb_get_temp, -+}; -+ -+static const struct brcmstb_thermal_of_data bcm7445_thermal_of_data = { -+ .of_ops = &bcm7445_thermal_of_ops, -+ .status_valid_mask = BIT(11), -+ .status_data_mask = GENMASK(10, 1), -+ .status_data_shift = 1, -+}; -+ -+static const struct brcmstb_thermal_of_data bcm2838_thermal_of_data = { -+ .of_ops = &bcm2838_thermal_of_ops, -+ .status_valid_mask = BIT(10), -+ .status_data_mask = GENMASK(9, 0), -+ .status_data_shift = 0, -+}; -+ - static const struct of_device_id brcmstb_thermal_id_table[] = { -- { .compatible = "brcm,avs-tmon" }, -+ { .compatible = "brcm,avs-tmon", -+ .data = &bcm7445_thermal_of_data }, -+ { .compatible = "brcm,avs-tmon-bcm2838", -+ .data = &bcm2838_thermal_of_data }, - {}, - }; - MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table); -@@ -326,10 +355,27 @@ static int brcmstb_thermal_probe(struct - if (IS_ERR(priv->tmon_base)) - return PTR_ERR(priv->tmon_base); - -+ priv->socdata = of_device_get_match_data(&pdev->dev); -+ if (!priv->socdata) { -+ dev_err(&pdev->dev, "no device match found\n"); -+ return -ENODEV; -+ } -+ -+ priv->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(priv->clk) && PTR_ERR(priv->clk) == -EPROBE_DEFER) -+ return -EPROBE_DEFER; -+ -+ if (!IS_ERR(priv->clk)) { -+ ret = clk_prepare_enable(priv->clk); -+ if (ret) -+ return ret; -+ } -+ - priv->dev = &pdev->dev; - platform_set_drvdata(pdev, priv); - -- thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops); -+ thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, -+ priv->socdata->of_ops); - if (IS_ERR(thermal)) { - ret = PTR_ERR(thermal); - dev_err(&pdev->dev, "could not register sensor: %d\n", ret); -@@ -369,6 +415,9 @@ static int brcmstb_thermal_exit(struct p - if (thermal) - thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal); - -+ if (!IS_ERR(priv->clk)) -+ clk_disable_unprepare(priv->clk); -+ - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0538-drm-v3d-Refactor-job-management.patch b/target/linux/brcm2708/patches-4.19/950-0538-drm-v3d-Refactor-job-management.patch new file mode 100644 index 0000000000..1192b166d4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0538-drm-v3d-Refactor-job-management.patch @@ -0,0 +1,1104 @@ +From ccf319a0265bfdb4a622a52645f159461bc88079 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 27 Dec 2018 12:11:52 -0800 +Subject: [PATCH] drm/v3d: Refactor job management. + +The CL submission had two jobs embedded in an exec struct. When I +added TFU support, I had to replicate some of the exec stuff and some +of the job stuff. As I went to add CSD, it became clear that actually +what was in exec should just be in the two CL jobs, and it would let +us share a lot more code between the 4 queues. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/v3d/v3d_drv.h | 77 ++++---- + drivers/gpu/drm/v3d/v3d_gem.c | 331 +++++++++++++++++--------------- + drivers/gpu/drm/v3d/v3d_irq.c | 8 +- + drivers/gpu/drm/v3d/v3d_sched.c | 264 ++++++++++++++----------- + 4 files changed, 373 insertions(+), 307 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -67,8 +67,8 @@ struct v3d_dev { + + struct work_struct overflow_mem_work; + +- struct v3d_exec_info *bin_job; +- struct v3d_exec_info *render_job; ++ struct v3d_bin_job *bin_job; ++ struct v3d_render_job *render_job; + struct v3d_tfu_job *tfu_job; + + struct v3d_queue_state queue[V3D_MAX_QUEUES]; +@@ -132,7 +132,7 @@ struct v3d_bo { + struct list_head vmas; /* list of v3d_vma */ + + /* List entry for the BO's position in +- * v3d_exec_info->unref_list ++ * v3d_render_job->unref_list + */ + struct list_head unref_head; + +@@ -176,7 +176,15 @@ to_v3d_fence(struct dma_fence *fence) + struct v3d_job { + struct drm_sched_job base; + +- struct v3d_exec_info *exec; ++ struct kref refcount; ++ ++ struct v3d_dev *v3d; ++ ++ /* This is the array of BOs that were looked up at the start ++ * of submission. ++ */ ++ struct v3d_bo **bo; ++ u32 bo_count; + + /* An optional fence userspace can pass in for the job to depend on. */ + struct dma_fence *in_fence; +@@ -184,59 +192,53 @@ struct v3d_job { + /* v3d fence to be signaled by IRQ handler when the job is complete. */ + struct dma_fence *irq_fence; + ++ /* scheduler fence for when the job is considered complete and ++ * the BO reservations can be released. ++ */ ++ struct dma_fence *done_fence; ++ ++ /* Callback for the freeing of the job on refcount going to 0. */ ++ void (*free)(struct kref *ref); ++}; ++ ++struct v3d_bin_job { ++ struct v3d_job base; ++ + /* GPU virtual addresses of the start/end of the CL job. */ + u32 start, end; + + u32 timedout_ctca, timedout_ctra; +-}; + +-struct v3d_exec_info { +- struct v3d_dev *v3d; ++ /* Corresponding render job, for attaching our overflow memory. */ ++ struct v3d_render_job *render; ++ ++ /* Submitted tile memory allocation start/size, tile state. */ ++ u32 qma, qms, qts; ++}; + +- struct v3d_job bin, render; ++struct v3d_render_job { ++ struct v3d_job base; + +- /* Fence for when the scheduler considers the binner to be +- * done, for render to depend on. ++ /* Optional fence for the binner, to depend on before starting ++ * our job. + */ + struct dma_fence *bin_done_fence; + +- /* Fence for when the scheduler considers the render to be +- * done, for when the BOs reservations should be complete. +- */ +- struct dma_fence *render_done_fence; +- +- struct kref refcount; ++ /* GPU virtual addresses of the start/end of the CL job. */ ++ u32 start, end; + +- /* This is the array of BOs that were looked up at the start of exec. */ +- struct v3d_bo **bo; +- u32 bo_count; ++ u32 timedout_ctca, timedout_ctra; + + /* List of overflow BOs used in the job that need to be + * released once the job is complete. + */ + struct list_head unref_list; +- +- /* Submitted tile memory allocation start/size, tile state. */ +- u32 qma, qms, qts; + }; + + struct v3d_tfu_job { +- struct drm_sched_job base; ++ struct v3d_job base; + + struct drm_v3d_submit_tfu args; +- +- /* An optional fence userspace can pass in for the job to depend on. */ +- struct dma_fence *in_fence; +- +- /* v3d fence to be signaled by IRQ handler when the job is complete. */ +- struct dma_fence *irq_fence; +- +- struct v3d_dev *v3d; +- +- struct kref refcount; +- +- /* This is the array of BOs that were looked up at the start of exec. */ +- struct v3d_bo *bo[4]; + }; + + /** +@@ -306,8 +308,7 @@ int v3d_submit_tfu_ioctl(struct drm_devi + struct drm_file *file_priv); + int v3d_wait_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +-void v3d_exec_put(struct v3d_exec_info *exec); +-void v3d_tfu_job_put(struct v3d_tfu_job *exec); ++void v3d_job_put(struct v3d_job *job); + void v3d_reset(struct v3d_dev *v3d); + void v3d_invalidate_caches(struct v3d_dev *v3d); + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -293,11 +293,11 @@ retry: + } + + /** +- * v3d_cl_lookup_bos() - Sets up exec->bo[] with the GEM objects ++ * v3d_lookup_bos() - Sets up job->bo[] with the GEM objects + * referenced by the job. + * @dev: DRM device + * @file_priv: DRM file for this fd +- * @exec: V3D job being set up ++ * @job: V3D job being set up + * + * The command validator needs to reference BOs by their index within + * the submitted job's BO list. This does the validation of the job's +@@ -307,18 +307,19 @@ retry: + * failure, because that will happen at v3d_exec_cleanup() time. + */ + static int +-v3d_cl_lookup_bos(struct drm_device *dev, +- struct drm_file *file_priv, +- struct drm_v3d_submit_cl *args, +- struct v3d_exec_info *exec) ++v3d_lookup_bos(struct drm_device *dev, ++ struct drm_file *file_priv, ++ struct v3d_job *job, ++ u64 bo_handles, ++ u32 bo_count) + { + u32 *handles; + int ret = 0; + int i; + +- exec->bo_count = args->bo_handle_count; ++ job->bo_count = bo_count; + +- if (!exec->bo_count) { ++ if (!job->bo_count) { + /* See comment on bo_index for why we have to check + * this. + */ +@@ -326,15 +327,15 @@ v3d_cl_lookup_bos(struct drm_device *dev + return -EINVAL; + } + +- exec->bo = kvmalloc_array(exec->bo_count, +- sizeof(struct drm_gem_cma_object *), +- GFP_KERNEL | __GFP_ZERO); +- if (!exec->bo) { ++ job->bo = kvmalloc_array(job->bo_count, ++ sizeof(struct drm_gem_cma_object *), ++ GFP_KERNEL | __GFP_ZERO); ++ if (!job->bo) { + DRM_DEBUG("Failed to allocate validated BO pointers\n"); + return -ENOMEM; + } + +- handles = kvmalloc_array(exec->bo_count, sizeof(u32), GFP_KERNEL); ++ handles = kvmalloc_array(job->bo_count, sizeof(u32), GFP_KERNEL); + if (!handles) { + ret = -ENOMEM; + DRM_DEBUG("Failed to allocate incoming GEM handles\n"); +@@ -342,15 +343,15 @@ v3d_cl_lookup_bos(struct drm_device *dev + } + + if (copy_from_user(handles, +- (void __user *)(uintptr_t)args->bo_handles, +- exec->bo_count * sizeof(u32))) { ++ (void __user *)(uintptr_t)bo_handles, ++ job->bo_count * sizeof(u32))) { + ret = -EFAULT; + DRM_DEBUG("Failed to copy in GEM handles\n"); + goto fail; + } + + spin_lock(&file_priv->table_lock); +- for (i = 0; i < exec->bo_count; i++) { ++ for (i = 0; i < job->bo_count; i++) { + struct drm_gem_object *bo = idr_find(&file_priv->object_idr, + handles[i]); + if (!bo) { +@@ -361,7 +362,7 @@ v3d_cl_lookup_bos(struct drm_device *dev + goto fail; + } + drm_gem_object_get(bo); +- exec->bo[i] = to_v3d_bo(bo); ++ job->bo[i] = to_v3d_bo(bo); + } + spin_unlock(&file_priv->table_lock); + +@@ -371,59 +372,41 @@ fail: + } + + static void +-v3d_exec_cleanup(struct kref *ref) ++v3d_job_free(struct kref *ref) + { +- struct v3d_exec_info *exec = container_of(ref, struct v3d_exec_info, +- refcount); +- unsigned int i; +- struct v3d_bo *bo, *save; +- +- dma_fence_put(exec->bin.in_fence); +- dma_fence_put(exec->render.in_fence); +- +- dma_fence_put(exec->bin.irq_fence); +- dma_fence_put(exec->render.irq_fence); +- +- dma_fence_put(exec->bin_done_fence); +- dma_fence_put(exec->render_done_fence); +- +- for (i = 0; i < exec->bo_count; i++) +- drm_gem_object_put_unlocked(&exec->bo[i]->base); +- kvfree(exec->bo); ++ struct v3d_job *job = container_of(ref, struct v3d_job, refcount); ++ int i; + +- list_for_each_entry_safe(bo, save, &exec->unref_list, unref_head) { +- drm_gem_object_put_unlocked(&bo->base); ++ for (i = 0; i < job->bo_count; i++) { ++ if (job->bo[i]) ++ drm_gem_object_put_unlocked(&job->bo[i]->base); + } ++ kvfree(job->bo); + +- kfree(exec); +-} ++ dma_fence_put(job->in_fence); ++ dma_fence_put(job->irq_fence); ++ dma_fence_put(job->done_fence); + +-void v3d_exec_put(struct v3d_exec_info *exec) +-{ +- kref_put(&exec->refcount, v3d_exec_cleanup); ++ kfree(job); + } + + static void +-v3d_tfu_job_cleanup(struct kref *ref) ++v3d_render_job_free(struct kref *ref) + { +- struct v3d_tfu_job *job = container_of(ref, struct v3d_tfu_job, +- refcount); +- unsigned int i; +- +- dma_fence_put(job->in_fence); +- dma_fence_put(job->irq_fence); ++ struct v3d_render_job *job = container_of(ref, struct v3d_render_job, ++ base.refcount); ++ struct v3d_bo *bo, *save; + +- for (i = 0; i < ARRAY_SIZE(job->bo); i++) { +- if (job->bo[i]) +- drm_gem_object_put_unlocked(&job->bo[i]->base); ++ list_for_each_entry_safe(bo, save, &job->unref_list, unref_head) { ++ drm_gem_object_put_unlocked(&bo->base); + } + +- kfree(job); ++ v3d_job_free(ref); + } + +-void v3d_tfu_job_put(struct v3d_tfu_job *job) ++void v3d_job_put(struct v3d_job *job) + { +- kref_put(&job->refcount, v3d_tfu_job_cleanup); ++ kref_put(&job->refcount, job->free); + } + + int +@@ -476,6 +459,65 @@ v3d_wait_bo_ioctl(struct drm_device *dev + return ret; + } + ++static int ++v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv, ++ struct v3d_job *job, void (*free)(struct kref *ref), ++ u32 in_sync) ++{ ++ int ret; ++ ++ job->v3d = v3d; ++ job->free = free; ++ ++ ret = drm_syncobj_find_fence(file_priv, in_sync, 0, &job->in_fence); ++ if (ret == -EINVAL) ++ return ret; ++ ++ kref_init(&job->refcount); ++ ++ return 0; ++} ++ ++static int ++v3d_push_job(struct v3d_file_priv *v3d_priv, ++ struct v3d_job *job, enum v3d_queue queue) ++{ ++ int ret; ++ ++ ret = drm_sched_job_init(&job->base, &v3d_priv->sched_entity[queue], ++ v3d_priv); ++ if (ret) ++ return ret; ++ ++ job->done_fence = dma_fence_get(&job->base.s_fence->finished); ++ ++ /* put by scheduler job completion */ ++ kref_get(&job->refcount); ++ ++ drm_sched_entity_push_job(&job->base, &v3d_priv->sched_entity[queue]); ++ ++ return 0; ++} ++ ++static void ++v3d_attach_fences_and_unlock_reservation(struct drm_file *file_priv, ++ struct v3d_job *job, ++ struct ww_acquire_ctx *acquire_ctx, ++ u32 out_sync) ++{ ++ struct drm_syncobj *sync_out; ++ ++ v3d_attach_object_fences(job->bo, job->bo_count, job->done_fence); ++ v3d_unlock_bo_reservations(job->bo, job->bo_count, acquire_ctx); ++ ++ /* Update the return sync object for the job */ ++ sync_out = drm_syncobj_find(file_priv, out_sync); ++ if (sync_out) { ++ drm_syncobj_replace_fence(sync_out, job->done_fence); ++ drm_syncobj_put(sync_out); ++ } ++} ++ + /** + * v3d_submit_cl_ioctl() - Submits a job (frame) to the V3D. + * @dev: DRM device +@@ -495,9 +537,9 @@ v3d_submit_cl_ioctl(struct drm_device *d + struct v3d_dev *v3d = to_v3d_dev(dev); + struct v3d_file_priv *v3d_priv = file_priv->driver_priv; + struct drm_v3d_submit_cl *args = data; +- struct v3d_exec_info *exec; ++ struct v3d_bin_job *bin = NULL; ++ struct v3d_render_job *render; + struct ww_acquire_ctx acquire_ctx; +- struct drm_syncobj *sync_out; + int ret = 0; + + trace_v3d_submit_cl_ioctl(&v3d->drm, args->rcl_start, args->rcl_end); +@@ -507,95 +549,84 @@ v3d_submit_cl_ioctl(struct drm_device *d + return -EINVAL; + } + +- exec = kcalloc(1, sizeof(*exec), GFP_KERNEL); +- if (!exec) ++ render = kcalloc(1, sizeof(*render), GFP_KERNEL); ++ if (!render) + return -ENOMEM; + +- kref_init(&exec->refcount); ++ render->start = args->rcl_start; ++ render->end = args->rcl_end; ++ INIT_LIST_HEAD(&render->unref_list); + +- ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl, +- 0, &exec->bin.in_fence); +- if (ret == -EINVAL) +- goto fail; ++ ret = v3d_job_init(v3d, file_priv, &render->base, ++ v3d_render_job_free, args->in_sync_rcl); ++ if (ret) { ++ kfree(bin); ++ kfree(render); ++ return ret; ++ } + +- ret = drm_syncobj_find_fence(file_priv, args->in_sync_rcl, +- 0, &exec->render.in_fence); +- if (ret == -EINVAL) +- goto fail; ++ if (args->bcl_start != args->bcl_end) { ++ bin = kcalloc(1, sizeof(*bin), GFP_KERNEL); ++ if (!bin) ++ return -ENOMEM; ++ ++ ret = v3d_job_init(v3d, file_priv, &bin->base, ++ v3d_job_free, args->in_sync_bcl); ++ if (ret) { ++ v3d_job_put(&render->base); ++ return ret; ++ } + +- exec->qma = args->qma; +- exec->qms = args->qms; +- exec->qts = args->qts; +- exec->bin.exec = exec; +- exec->bin.start = args->bcl_start; +- exec->bin.end = args->bcl_end; +- exec->render.exec = exec; +- exec->render.start = args->rcl_start; +- exec->render.end = args->rcl_end; +- exec->v3d = v3d; +- INIT_LIST_HEAD(&exec->unref_list); ++ bin->start = args->bcl_start; ++ bin->end = args->bcl_end; ++ bin->qma = args->qma; ++ bin->qms = args->qms; ++ bin->qts = args->qts; ++ bin->render = render; ++ } + +- ret = v3d_cl_lookup_bos(dev, file_priv, args, exec); ++ ret = v3d_lookup_bos(dev, file_priv, &render->base, ++ args->bo_handles, args->bo_handle_count); + if (ret) + goto fail; + +- ret = v3d_lock_bo_reservations(exec->bo, exec->bo_count, ++ ret = v3d_lock_bo_reservations(render->base.bo, render->base.bo_count, + &acquire_ctx); + if (ret) + goto fail; + + mutex_lock(&v3d->sched_lock); +- if (exec->bin.start != exec->bin.end) { +- ret = drm_sched_job_init(&exec->bin.base, +- &v3d_priv->sched_entity[V3D_BIN], +- v3d_priv); ++ if (bin) { ++ ret = v3d_push_job(v3d_priv, &bin->base, V3D_BIN); + if (ret) + goto fail_unreserve; + +- exec->bin_done_fence = +- dma_fence_get(&exec->bin.base.s_fence->finished); +- +- kref_get(&exec->refcount); /* put by scheduler job completion */ +- drm_sched_entity_push_job(&exec->bin.base, +- &v3d_priv->sched_entity[V3D_BIN]); ++ render->bin_done_fence = dma_fence_get(bin->base.done_fence); + } + +- ret = drm_sched_job_init(&exec->render.base, +- &v3d_priv->sched_entity[V3D_RENDER], +- v3d_priv); ++ ret = v3d_push_job(v3d_priv, &render->base, V3D_RENDER); + if (ret) + goto fail_unreserve; +- +- exec->render_done_fence = +- dma_fence_get(&exec->render.base.s_fence->finished); +- +- kref_get(&exec->refcount); /* put by scheduler job completion */ +- drm_sched_entity_push_job(&exec->render.base, +- &v3d_priv->sched_entity[V3D_RENDER]); + mutex_unlock(&v3d->sched_lock); + +- v3d_attach_object_fences(exec->bo, exec->bo_count, +- exec->render_done_fence); +- +- v3d_unlock_bo_reservations(exec->bo, exec->bo_count, &acquire_ctx); +- +- /* Update the return sync object for the */ +- sync_out = drm_syncobj_find(file_priv, args->out_sync); +- if (sync_out) { +- drm_syncobj_replace_fence(sync_out, +- exec->render_done_fence); +- drm_syncobj_put(sync_out); +- } +- +- v3d_exec_put(exec); ++ v3d_attach_fences_and_unlock_reservation(file_priv, ++ &render->base, &acquire_ctx, ++ args->out_sync); ++ ++ if (bin) ++ v3d_job_put(&bin->base); ++ v3d_job_put(&render->base); + + return 0; + + fail_unreserve: + mutex_unlock(&v3d->sched_lock); +- v3d_unlock_bo_reservations(exec->bo, exec->bo_count, &acquire_ctx); ++ v3d_unlock_bo_reservations(render->base.bo, ++ render->base.bo_count, &acquire_ctx); + fail: +- v3d_exec_put(exec); ++ if (bin) ++ v3d_job_put(&bin->base); ++ v3d_job_put(&render->base); + + return ret; + } +@@ -618,10 +649,7 @@ v3d_submit_tfu_ioctl(struct drm_device * + struct drm_v3d_submit_tfu *args = data; + struct v3d_tfu_job *job; + struct ww_acquire_ctx acquire_ctx; +- struct drm_syncobj *sync_out; +- struct dma_fence *sched_done_fence; + int ret = 0; +- int bo_count; + + trace_v3d_submit_tfu_ioctl(&v3d->drm, args->iia); + +@@ -629,75 +657,66 @@ v3d_submit_tfu_ioctl(struct drm_device * + if (!job) + return -ENOMEM; + +- kref_init(&job->refcount); +- +- ret = drm_syncobj_find_fence(file_priv, args->in_sync, +- 0, &job->in_fence); +- if (ret == -EINVAL) +- goto fail; ++ ret = v3d_job_init(v3d, file_priv, &job->base, ++ v3d_job_free, args->in_sync); ++ if (ret) { ++ kfree(job); ++ return ret; ++ } + ++ job->base.bo = kcalloc(ARRAY_SIZE(args->bo_handles), ++ sizeof(*job->base.bo), GFP_KERNEL); + job->args = *args; +- job->v3d = v3d; + + spin_lock(&file_priv->table_lock); +- for (bo_count = 0; bo_count < ARRAY_SIZE(job->bo); bo_count++) { ++ for (job->base.bo_count = 0; ++ job->base.bo_count < ARRAY_SIZE(args->bo_handles); ++ job->base.bo_count++) { + struct drm_gem_object *bo; + +- if (!args->bo_handles[bo_count]) ++ if (!args->bo_handles[job->base.bo_count]) + break; + + bo = idr_find(&file_priv->object_idr, +- args->bo_handles[bo_count]); ++ args->bo_handles[job->base.bo_count]); + if (!bo) { + DRM_DEBUG("Failed to look up GEM BO %d: %d\n", +- bo_count, args->bo_handles[bo_count]); ++ job->base.bo_count, ++ args->bo_handles[job->base.bo_count]); + ret = -ENOENT; + spin_unlock(&file_priv->table_lock); + goto fail; + } + drm_gem_object_get(bo); +- job->bo[bo_count] = to_v3d_bo(bo); ++ job->base.bo[job->base.bo_count] = to_v3d_bo(bo); + } + spin_unlock(&file_priv->table_lock); + +- ret = v3d_lock_bo_reservations(job->bo, bo_count, &acquire_ctx); ++ ret = v3d_lock_bo_reservations(job->base.bo, job->base.bo_count, ++ &acquire_ctx); + if (ret) + goto fail; + + mutex_lock(&v3d->sched_lock); +- ret = drm_sched_job_init(&job->base, +- &v3d_priv->sched_entity[V3D_TFU], +- v3d_priv); ++ ret = v3d_push_job(v3d_priv, &job->base, V3D_TFU); + if (ret) + goto fail_unreserve; +- +- sched_done_fence = dma_fence_get(&job->base.s_fence->finished); +- +- kref_get(&job->refcount); /* put by scheduler job completion */ +- drm_sched_entity_push_job(&job->base, &v3d_priv->sched_entity[V3D_TFU]); + mutex_unlock(&v3d->sched_lock); + +- v3d_attach_object_fences(job->bo, bo_count, sched_done_fence); +- +- v3d_unlock_bo_reservations(job->bo, bo_count, &acquire_ctx); +- +- /* Update the return sync object */ +- sync_out = drm_syncobj_find(file_priv, args->out_sync); +- if (sync_out) { +- drm_syncobj_replace_fence(sync_out, sched_done_fence); +- drm_syncobj_put(sync_out); +- } +- dma_fence_put(sched_done_fence); ++ v3d_attach_fences_and_unlock_reservation(file_priv, ++ &job->base, &acquire_ctx, ++ args->out_sync); + +- v3d_tfu_job_put(job); ++ v3d_job_put(&job->base); + + return 0; + + fail_unreserve: + mutex_unlock(&v3d->sched_lock); +- v3d_unlock_bo_reservations(job->bo, bo_count, &acquire_ctx); ++ v3d_unlock_bo_reservations(job->base.bo, job->base.bo_count, ++ &acquire_ctx); + fail: +- v3d_tfu_job_put(job); ++ v3d_job_put(&job->base); + + return ret; + } +@@ -755,7 +774,7 @@ v3d_gem_destroy(struct drm_device *dev) + + v3d_sched_fini(v3d); + +- /* Waiting for exec to finish would need to be done before ++ /* Waiting for jobs to finish would need to be done before + * unregistering V3D. + */ + WARN_ON(v3d->bin_job); +--- a/drivers/gpu/drm/v3d/v3d_irq.c ++++ b/drivers/gpu/drm/v3d/v3d_irq.c +@@ -60,7 +60,7 @@ v3d_overflow_mem_work(struct work_struct + } + + drm_gem_object_get(&bo->base); +- list_add_tail(&bo->unref_head, &v3d->bin_job->unref_list); ++ list_add_tail(&bo->unref_head, &v3d->bin_job->render->unref_list); + spin_unlock_irqrestore(&v3d->job_lock, irqflags); + + V3D_CORE_WRITE(0, V3D_PTB_BPOA, bo->node.start << PAGE_SHIFT); +@@ -93,7 +93,7 @@ v3d_irq(int irq, void *arg) + + if (intsts & V3D_INT_FLDONE) { + struct v3d_fence *fence = +- to_v3d_fence(v3d->bin_job->bin.irq_fence); ++ to_v3d_fence(v3d->bin_job->base.irq_fence); + + trace_v3d_bcl_irq(&v3d->drm, fence->seqno); + dma_fence_signal(&fence->base); +@@ -102,7 +102,7 @@ v3d_irq(int irq, void *arg) + + if (intsts & V3D_INT_FRDONE) { + struct v3d_fence *fence = +- to_v3d_fence(v3d->render_job->render.irq_fence); ++ to_v3d_fence(v3d->render_job->base.irq_fence); + + trace_v3d_rcl_irq(&v3d->drm, fence->seqno); + dma_fence_signal(&fence->base); +@@ -138,7 +138,7 @@ v3d_hub_irq(int irq, void *arg) + + if (intsts & V3D_HUB_INT_TFUC) { + struct v3d_fence *fence = +- to_v3d_fence(v3d->tfu_job->irq_fence); ++ to_v3d_fence(v3d->tfu_job->base.irq_fence); + + trace_v3d_tfu_irq(&v3d->drm, fence->seqno); + dma_fence_signal(&fence->base); +--- a/drivers/gpu/drm/v3d/v3d_sched.c ++++ b/drivers/gpu/drm/v3d/v3d_sched.c +@@ -30,39 +30,43 @@ to_v3d_job(struct drm_sched_job *sched_j + return container_of(sched_job, struct v3d_job, base); + } + +-static struct v3d_tfu_job * +-to_tfu_job(struct drm_sched_job *sched_job) ++static struct v3d_bin_job * ++to_bin_job(struct drm_sched_job *sched_job) + { +- return container_of(sched_job, struct v3d_tfu_job, base); ++ return container_of(sched_job, struct v3d_bin_job, base.base); + } + +-static void +-v3d_job_free(struct drm_sched_job *sched_job) ++static struct v3d_render_job * ++to_render_job(struct drm_sched_job *sched_job) + { +- struct v3d_job *job = to_v3d_job(sched_job); ++ return container_of(sched_job, struct v3d_render_job, base.base); ++} + +- v3d_exec_put(job->exec); ++static struct v3d_tfu_job * ++to_tfu_job(struct drm_sched_job *sched_job) ++{ ++ return container_of(sched_job, struct v3d_tfu_job, base.base); + } + + static void +-v3d_tfu_job_free(struct drm_sched_job *sched_job) ++v3d_job_free(struct drm_sched_job *sched_job) + { +- struct v3d_tfu_job *job = to_tfu_job(sched_job); ++ struct v3d_job *job = to_v3d_job(sched_job); + +- v3d_tfu_job_put(job); ++ v3d_job_put(job); + } + + /** +- * Returns the fences that the bin or render job depends on, one by one. +- * v3d_job_run() won't be called until all of them have been signaled. ++ * Returns the fences that the job depends on, one by one. ++ * ++ * If placed in the scheduler's .dependency method, the corresponding ++ * .run_job won't be called until all of them have been signaled. + */ + static struct dma_fence * + v3d_job_dependency(struct drm_sched_job *sched_job, + struct drm_sched_entity *s_entity) + { + struct v3d_job *job = to_v3d_job(sched_job); +- struct v3d_exec_info *exec = job->exec; +- enum v3d_queue q = job == &exec->bin ? V3D_BIN : V3D_RENDER; + struct dma_fence *fence; + + fence = job->in_fence; +@@ -71,113 +75,132 @@ v3d_job_dependency(struct drm_sched_job + return fence; + } + +- if (q == V3D_RENDER) { +- /* If we had a bin job, the render job definitely depends on +- * it. We first have to wait for bin to be scheduled, so that +- * its done_fence is created. +- */ +- fence = exec->bin_done_fence; +- if (fence) { +- exec->bin_done_fence = NULL; +- return fence; +- } +- } +- +- /* XXX: Wait on a fence for switching the GMP if necessary, +- * and then do so. +- */ +- +- return fence; ++ return NULL; + } + + /** +- * Returns the fences that the TFU job depends on, one by one. +- * v3d_tfu_job_run() won't be called until all of them have been +- * signaled. ++ * Returns the fences that the render job depends on, one by one. ++ * v3d_job_run() won't be called until all of them have been signaled. + */ + static struct dma_fence * +-v3d_tfu_job_dependency(struct drm_sched_job *sched_job, +- struct drm_sched_entity *s_entity) ++v3d_render_job_dependency(struct drm_sched_job *sched_job, ++ struct drm_sched_entity *s_entity) + { +- struct v3d_tfu_job *job = to_tfu_job(sched_job); ++ struct v3d_render_job *job = to_render_job(sched_job); + struct dma_fence *fence; + +- fence = job->in_fence; ++ fence = v3d_job_dependency(sched_job, s_entity); ++ if (fence) ++ return fence; ++ ++ /* If we had a bin job, the render job definitely depends on ++ * it. We first have to wait for bin to be scheduled, so that ++ * its done_fence is created. ++ */ ++ fence = job->bin_done_fence; + if (fence) { +- job->in_fence = NULL; ++ job->bin_done_fence = NULL; + return fence; + } + +- return NULL; ++ /* XXX: Wait on a fence for switching the GMP if necessary, ++ * and then do so. ++ */ ++ ++ return fence; + } + +-static struct dma_fence *v3d_job_run(struct drm_sched_job *sched_job) ++static struct dma_fence *v3d_bin_job_run(struct drm_sched_job *sched_job) + { +- struct v3d_job *job = to_v3d_job(sched_job); +- struct v3d_exec_info *exec = job->exec; +- enum v3d_queue q = job == &exec->bin ? V3D_BIN : V3D_RENDER; +- struct v3d_dev *v3d = exec->v3d; ++ struct v3d_bin_job *job = to_bin_job(sched_job); ++ struct v3d_dev *v3d = job->base.v3d; + struct drm_device *dev = &v3d->drm; + struct dma_fence *fence; + unsigned long irqflags; + +- if (unlikely(job->base.s_fence->finished.error)) ++ if (unlikely(job->base.base.s_fence->finished.error)) + return NULL; + + /* Lock required around bin_job update vs + * v3d_overflow_mem_work(). + */ + spin_lock_irqsave(&v3d->job_lock, irqflags); +- if (q == V3D_BIN) { +- v3d->bin_job = job->exec; ++ v3d->bin_job = job; ++ /* Clear out the overflow allocation, so we don't ++ * reuse the overflow attached to a previous job. ++ */ ++ V3D_CORE_WRITE(0, V3D_PTB_BPOS, 0); ++ spin_unlock_irqrestore(&v3d->job_lock, irqflags); ++ ++ v3d_invalidate_caches(v3d); + +- /* Clear out the overflow allocation, so we don't +- * reuse the overflow attached to a previous job. +- */ +- V3D_CORE_WRITE(0, V3D_PTB_BPOS, 0); +- } else { +- v3d->render_job = job->exec; ++ fence = v3d_fence_create(v3d, V3D_BIN); ++ if (IS_ERR(fence)) ++ return NULL; ++ ++ if (job->base.irq_fence) ++ dma_fence_put(job->base.irq_fence); ++ job->base.irq_fence = dma_fence_get(fence); ++ ++ trace_v3d_submit_cl(dev, false, to_v3d_fence(fence)->seqno, ++ job->start, job->end); ++ ++ /* Set the current and end address of the control list. ++ * Writing the end register is what starts the job. ++ */ ++ if (job->qma) { ++ V3D_CORE_WRITE(0, V3D_CLE_CT0QMA, job->qma); ++ V3D_CORE_WRITE(0, V3D_CLE_CT0QMS, job->qms); + } +- spin_unlock_irqrestore(&v3d->job_lock, irqflags); ++ if (job->qts) { ++ V3D_CORE_WRITE(0, V3D_CLE_CT0QTS, ++ V3D_CLE_CT0QTS_ENABLE | ++ job->qts); ++ } ++ V3D_CORE_WRITE(0, V3D_CLE_CT0QBA, job->start); ++ V3D_CORE_WRITE(0, V3D_CLE_CT0QEA, job->end); ++ ++ return fence; ++} ++ ++static struct dma_fence *v3d_render_job_run(struct drm_sched_job *sched_job) ++{ ++ struct v3d_render_job *job = to_render_job(sched_job); ++ struct v3d_dev *v3d = job->base.v3d; ++ struct drm_device *dev = &v3d->drm; ++ struct dma_fence *fence; ++ ++ if (unlikely(job->base.base.s_fence->finished.error)) ++ return NULL; + +- /* Can we avoid this flush when q==RENDER? We need to be +- * careful of scheduling, though -- imagine job0 rendering to +- * texture and job1 reading, and them being executed as bin0, +- * bin1, render0, render1, so that render1's flush at bin time ++ v3d->render_job = job; ++ ++ /* Can we avoid this flush? We need to be careful of ++ * scheduling, though -- imagine job0 rendering to texture and ++ * job1 reading, and them being executed as bin0, bin1, ++ * render0, render1, so that render1's flush at bin time + * wasn't enough. + */ + v3d_invalidate_caches(v3d); + +- fence = v3d_fence_create(v3d, q); ++ fence = v3d_fence_create(v3d, V3D_RENDER); + if (IS_ERR(fence)) + return NULL; + +- if (job->irq_fence) +- dma_fence_put(job->irq_fence); +- job->irq_fence = dma_fence_get(fence); ++ if (job->base.irq_fence) ++ dma_fence_put(job->base.irq_fence); ++ job->base.irq_fence = dma_fence_get(fence); + +- trace_v3d_submit_cl(dev, q == V3D_RENDER, to_v3d_fence(fence)->seqno, ++ trace_v3d_submit_cl(dev, true, to_v3d_fence(fence)->seqno, + job->start, job->end); + +- if (q == V3D_BIN) { +- if (exec->qma) { +- V3D_CORE_WRITE(0, V3D_CLE_CT0QMA, exec->qma); +- V3D_CORE_WRITE(0, V3D_CLE_CT0QMS, exec->qms); +- } +- if (exec->qts) { +- V3D_CORE_WRITE(0, V3D_CLE_CT0QTS, +- V3D_CLE_CT0QTS_ENABLE | +- exec->qts); +- } +- } else { +- /* XXX: Set the QCFG */ +- } ++ /* XXX: Set the QCFG */ + + /* Set the current and end address of the control list. + * Writing the end register is what starts the job. + */ +- V3D_CORE_WRITE(0, V3D_CLE_CTNQBA(q), job->start); +- V3D_CORE_WRITE(0, V3D_CLE_CTNQEA(q), job->end); ++ V3D_CORE_WRITE(0, V3D_CLE_CT1QBA, job->start); ++ V3D_CORE_WRITE(0, V3D_CLE_CT1QEA, job->end); + + return fence; + } +@@ -186,7 +209,7 @@ static struct dma_fence * + v3d_tfu_job_run(struct drm_sched_job *sched_job) + { + struct v3d_tfu_job *job = to_tfu_job(sched_job); +- struct v3d_dev *v3d = job->v3d; ++ struct v3d_dev *v3d = job->base.v3d; + struct drm_device *dev = &v3d->drm; + struct dma_fence *fence; + +@@ -195,9 +218,9 @@ v3d_tfu_job_run(struct drm_sched_job *sc + return NULL; + + v3d->tfu_job = job; +- if (job->irq_fence) +- dma_fence_put(job->irq_fence); +- job->irq_fence = dma_fence_get(fence); ++ if (job->base.irq_fence) ++ dma_fence_put(job->base.irq_fence); ++ job->base.irq_fence = dma_fence_get(fence); + + trace_v3d_submit_tfu(dev, to_v3d_fence(fence)->seqno); + +@@ -247,25 +270,23 @@ v3d_gpu_reset_for_timeout(struct v3d_dev + mutex_unlock(&v3d->reset_lock); + } + ++/* If the current address or return address have changed, then the GPU ++ * has probably made progress and we should delay the reset. This ++ * could fail if the GPU got in an infinite loop in the CL, but that ++ * is pretty unlikely outside of an i-g-t testcase. ++ */ + static void +-v3d_job_timedout(struct drm_sched_job *sched_job) ++v3d_cl_job_timedout(struct drm_sched_job *sched_job, enum v3d_queue q, ++ u32 *timedout_ctca, u32 *timedout_ctra) + { + struct v3d_job *job = to_v3d_job(sched_job); +- struct v3d_exec_info *exec = job->exec; +- struct v3d_dev *v3d = exec->v3d; +- enum v3d_queue job_q = job == &exec->bin ? V3D_BIN : V3D_RENDER; +- u32 ctca = V3D_CORE_READ(0, V3D_CLE_CTNCA(job_q)); +- u32 ctra = V3D_CORE_READ(0, V3D_CLE_CTNRA(job_q)); +- +- /* If the current address or return address have changed, then +- * the GPU has probably made progress and we should delay the +- * reset. This could fail if the GPU got in an infinite loop +- * in the CL, but that is pretty unlikely outside of an i-g-t +- * testcase. +- */ +- if (job->timedout_ctca != ctca || job->timedout_ctra != ctra) { +- job->timedout_ctca = ctca; +- job->timedout_ctra = ctra; ++ struct v3d_dev *v3d = job->v3d; ++ u32 ctca = V3D_CORE_READ(0, V3D_CLE_CTNCA(q)); ++ u32 ctra = V3D_CORE_READ(0, V3D_CLE_CTNRA(q)); ++ ++ if (*timedout_ctca != ctca || *timedout_ctra != ctra) { ++ *timedout_ctca = ctca; ++ *timedout_ctra = ctra; + schedule_delayed_work(&job->base.work_tdr, + job->base.sched->timeout); + return; +@@ -275,25 +296,50 @@ v3d_job_timedout(struct drm_sched_job *s + } + + static void ++v3d_bin_job_timedout(struct drm_sched_job *sched_job) ++{ ++ struct v3d_bin_job *job = to_bin_job(sched_job); ++ ++ v3d_cl_job_timedout(sched_job, V3D_BIN, ++ &job->timedout_ctca, &job->timedout_ctra); ++} ++ ++static void ++v3d_render_job_timedout(struct drm_sched_job *sched_job) ++{ ++ struct v3d_render_job *job = to_render_job(sched_job); ++ ++ v3d_cl_job_timedout(sched_job, V3D_RENDER, ++ &job->timedout_ctca, &job->timedout_ctra); ++} ++ ++static void + v3d_tfu_job_timedout(struct drm_sched_job *sched_job) + { +- struct v3d_tfu_job *job = to_tfu_job(sched_job); ++ struct v3d_job *job = to_v3d_job(sched_job); + + v3d_gpu_reset_for_timeout(job->v3d, sched_job); + } + +-static const struct drm_sched_backend_ops v3d_sched_ops = { ++static const struct drm_sched_backend_ops v3d_bin_sched_ops = { + .dependency = v3d_job_dependency, +- .run_job = v3d_job_run, +- .timedout_job = v3d_job_timedout, +- .free_job = v3d_job_free ++ .run_job = v3d_bin_job_run, ++ .timedout_job = v3d_bin_job_timedout, ++ .free_job = v3d_job_free, ++}; ++ ++static const struct drm_sched_backend_ops v3d_render_sched_ops = { ++ .dependency = v3d_render_job_dependency, ++ .run_job = v3d_render_job_run, ++ .timedout_job = v3d_render_job_timedout, ++ .free_job = v3d_job_free, + }; + + static const struct drm_sched_backend_ops v3d_tfu_sched_ops = { +- .dependency = v3d_tfu_job_dependency, ++ .dependency = v3d_job_dependency, + .run_job = v3d_tfu_job_run, + .timedout_job = v3d_tfu_job_timedout, +- .free_job = v3d_tfu_job_free ++ .free_job = v3d_job_free, + }; + + int +@@ -305,7 +351,7 @@ v3d_sched_init(struct v3d_dev *v3d) + int ret; + + ret = drm_sched_init(&v3d->queue[V3D_BIN].sched, +- &v3d_sched_ops, ++ &v3d_bin_sched_ops, + hw_jobs_limit, job_hang_limit, + msecs_to_jiffies(hang_limit_ms), + "v3d_bin"); +@@ -315,7 +361,7 @@ v3d_sched_init(struct v3d_dev *v3d) + } + + ret = drm_sched_init(&v3d->queue[V3D_RENDER].sched, +- &v3d_sched_ops, ++ &v3d_render_sched_ops, + hw_jobs_limit, job_hang_limit, + msecs_to_jiffies(hang_limit_ms), + "v3d_render"); diff --git a/target/linux/brcm2708/patches-4.19/950-0538-vchiq-Add-36-bit-address-support.patch b/target/linux/brcm2708/patches-4.19/950-0538-vchiq-Add-36-bit-address-support.patch deleted file mode 100644 index 871ab1effd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0538-vchiq-Add-36-bit-address-support.patch +++ /dev/null @@ -1,196 +0,0 @@ -From d5c6191cc94b358de183cc8c88a5722a79445202 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 1 Nov 2018 17:31:37 +0000 -Subject: [PATCH 538/806] vchiq: Add 36-bit address support - -Conditional on a new compatible string, change the pagelist encoding -such that the top 24 bits are the pfn, leaving 8 bits for run length -(-1). - -Signed-off-by: Phil Elwell ---- - .../interface/vchiq_arm/vchiq_2835_arm.c | 90 ++++++++++++++----- - .../interface/vchiq_arm/vchiq_arm.c | 6 ++ - .../interface/vchiq_arm/vchiq_arm.h | 1 + - 3 files changed, 75 insertions(+), 22 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -@@ -47,6 +47,8 @@ - #include - - #define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32) -+#define VC_SAFE(x) (g_use_36bit_addrs ? ((u32)(x) | 0xc0000000) : (u32)(x)) -+#define IS_VC_SAFE(x) (g_use_36bit_addrs ? !((x) & ~0x3fffffffull) : 1) - - #include "vchiq_arm.h" - #include "vchiq_connected.h" -@@ -96,6 +98,7 @@ static void __iomem *g_regs; - */ - static unsigned int g_cache_line_size; - static struct dma_pool *g_dma_pool; -+static unsigned int g_use_36bit_addrs = 0; - static unsigned int g_fragments_size; - static char *g_fragments_base; - static char *g_free_fragments; -@@ -139,6 +142,8 @@ int vchiq_platform_init(struct platform_ - g_cache_line_size = drvdata->cache_line_size; - g_fragments_size = 2 * g_cache_line_size; - -+ g_use_36bit_addrs = (dev->dma_pfn_offset == 0); -+ - /* Allocate space for the channels in coherent memory */ - slot_mem_size = PAGE_ALIGN(TOTAL_SLOTS * VCHIQ_SLOT_SIZE); - frag_mem_size = PAGE_ALIGN(g_fragments_size * MAX_FRAGMENTS); -@@ -150,14 +155,21 @@ int vchiq_platform_init(struct platform_ - return -ENOMEM; - } - -+ if (!IS_VC_SAFE(slot_phys)) { -+ dev_err(dev, "allocated DMA memory %pad is not VC-safe\n", -+ &slot_phys); -+ return -ENOMEM; -+ } -+ - WARN_ON(((unsigned long)slot_mem & (PAGE_SIZE - 1)) != 0); -+ channelbase = VC_SAFE(slot_phys); - - vchiq_slot_zero = vchiq_init_slots(slot_mem, slot_mem_size); - if (!vchiq_slot_zero) - return -EINVAL; - - vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX] = -- (int)slot_phys + slot_mem_size; -+ channelbase + slot_mem_size; - vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX] = - MAX_FRAGMENTS; - -@@ -193,7 +205,6 @@ int vchiq_platform_init(struct platform_ - } - - /* Send the base address of the slots to VideoCore */ -- channelbase = slot_phys; - err = rpi_firmware_property(fw, RPI_FIRMWARE_VCHIQ_INIT, - &channelbase, sizeof(channelbase)); - if (err || channelbase) { -@@ -282,7 +293,7 @@ vchiq_prepare_bulk_data(VCHIQ_BULK_T *bu - return VCHIQ_ERROR; - - bulk->handle = memhandle; -- bulk->data = (void *)(unsigned long)pagelistinfo->dma_addr; -+ bulk->data = (void *)VC_SAFE(pagelistinfo->dma_addr); - - /* - * Store the pagelistinfo address in remote_data, -@@ -570,25 +581,60 @@ create_pagelist(char __user *buf, size_t - - /* Combine adjacent blocks for performance */ - k = 0; -- for_each_sg(scatterlist, sg, dma_buffers, i) { -- u32 len = sg_dma_len(sg); -- u32 addr = sg_dma_address(sg); -- -- /* Note: addrs is the address + page_count - 1 -- * The firmware expects blocks after the first to be page- -- * aligned and a multiple of the page size -- */ -- WARN_ON(len == 0); -- WARN_ON(i && (i != (dma_buffers - 1)) && (len & ~PAGE_MASK)); -- WARN_ON(i && (addr & ~PAGE_MASK)); -- if (k > 0 && -- ((addrs[k - 1] & PAGE_MASK) + -- (((addrs[k - 1] & ~PAGE_MASK) + 1) << PAGE_SHIFT)) -- == (addr & PAGE_MASK)) -- addrs[k - 1] += ((len + PAGE_SIZE - 1) >> PAGE_SHIFT); -- else -- addrs[k++] = (addr & PAGE_MASK) | -- (((len + PAGE_SIZE - 1) >> PAGE_SHIFT) - 1); -+ if (g_use_36bit_addrs) { -+ for_each_sg(scatterlist, sg, dma_buffers, i) { -+ u32 len = sg_dma_len(sg); -+ u64 addr = sg_dma_address(sg); -+ u32 page_id = (u32)((addr >> 4) & ~0xff); -+ u32 sg_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; -+ -+ /* Note: addrs is the address + page_count - 1 -+ * The firmware expects blocks after the first to be page- -+ * aligned and a multiple of the page size -+ */ -+ WARN_ON(len == 0); -+ WARN_ON(i && -+ (i != (dma_buffers - 1)) && (len & ~PAGE_MASK)); -+ WARN_ON(i && (addr & ~PAGE_MASK)); -+ WARN_ON(upper_32_bits(addr) > 0xf); -+ if (k > 0 && -+ ((addrs[k - 1] & ~0xff) + -+ (((addrs[k - 1] & 0xff) + 1) << 8) -+ == page_id)) { -+ u32 inc_pages = min(sg_pages, -+ 0xff - (addrs[k - 1] & 0xff)); -+ addrs[k - 1] += inc_pages; -+ page_id += inc_pages << 8; -+ sg_pages -= inc_pages; -+ } -+ while (sg_pages) { -+ u32 inc_pages = min(sg_pages, 0x100u); -+ addrs[k++] = page_id | (inc_pages - 1); -+ page_id += inc_pages << 8; -+ sg_pages -= inc_pages; -+ } -+ } -+ } else { -+ for_each_sg(scatterlist, sg, dma_buffers, i) { -+ u32 len = sg_dma_len(sg); -+ u32 addr = VC_SAFE(sg_dma_address(sg)); -+ u32 new_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; -+ -+ /* Note: addrs is the address + page_count - 1 -+ * The firmware expects blocks after the first to be page- -+ * aligned and a multiple of the page size -+ */ -+ WARN_ON(len == 0); -+ WARN_ON(i && (i != (dma_buffers - 1)) && (len & ~PAGE_MASK)); -+ WARN_ON(i && (addr & ~PAGE_MASK)); -+ if (k > 0 && -+ ((addrs[k - 1] & PAGE_MASK) + -+ (((addrs[k - 1] & ~PAGE_MASK) + 1) << PAGE_SHIFT)) -+ == (addr & PAGE_MASK)) -+ addrs[k - 1] += new_pages; -+ else -+ addrs[k++] = (addr & PAGE_MASK) | (new_pages - 1); -+ } - } - - /* Partial cache lines (fragments) require special measures */ ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -181,6 +181,11 @@ static struct vchiq_drvdata bcm2836_drvd - .cache_line_size = 64, - }; - -+static struct vchiq_drvdata bcm2838_drvdata = { -+ .cache_line_size = 64, -+ .use_36bit_addrs = true, -+}; -+ - static const char *const ioctl_names[] = { - "CONNECT", - "SHUTDOWN", -@@ -3618,6 +3623,7 @@ vchiq_register_child(struct platform_dev - static const struct of_device_id vchiq_of_match[] = { - { .compatible = "brcm,bcm2835-vchiq", .data = &bcm2835_drvdata }, - { .compatible = "brcm,bcm2836-vchiq", .data = &bcm2836_drvdata }, -+ { .compatible = "brcm,bcm2838-vchiq", .data = &bcm2838_drvdata }, - {}, - }; - MODULE_DEVICE_TABLE(of, vchiq_of_match); ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.h -@@ -125,6 +125,7 @@ typedef struct vchiq_arm_state_struct { - - struct vchiq_drvdata { - const unsigned int cache_line_size; -+ const bool use_36bit_addrs; - struct rpi_firmware *fw; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0539-bcm2835-pcm.c-Support-multichannel-audio.patch b/target/linux/brcm2708/patches-4.19/950-0539-bcm2835-pcm.c-Support-multichannel-audio.patch deleted file mode 100644 index 781d372630..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0539-bcm2835-pcm.c-Support-multichannel-audio.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 69d7e7d0f958186a0f7667ebeefdb50d1c5c3bd3 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 30 Apr 2019 19:15:30 +0100 -Subject: [PATCH 539/806] bcm2835-pcm.c: Support multichannel audio - ---- - .../vc04_services/bcm2835-audio/bcm2835-pcm.c | 17 +++++++++-------- - 1 file changed, 9 insertions(+), 8 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c -@@ -14,9 +14,9 @@ static const struct snd_pcm_hardware snd - SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR), - .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, -- .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_192000, - .rate_min = 8000, -- .rate_max = 48000, -+ .rate_max = 192000, - .channels_min = 1, - .channels_max = 2, - .buffer_bytes_max = 128 * 1024, -@@ -31,15 +31,16 @@ static const struct snd_pcm_hardware snd - SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_DRAIN_TRIGGER | SNDRV_PCM_INFO_SYNC_APPLPTR), - .formats = SNDRV_PCM_FMTBIT_S16_LE, -- .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 | -- SNDRV_PCM_RATE_48000, -+ .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | -+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | -+ SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000, - .rate_min = 44100, -- .rate_max = 48000, -+ .rate_max = 192000, - .channels_min = 2, -- .channels_max = 2, -- .buffer_bytes_max = 128 * 1024, -+ .channels_max = 8, -+ .buffer_bytes_max = 512 * 1024, - .period_bytes_min = 1 * 1024, -- .period_bytes_max = 128 * 1024, -+ .period_bytes_max = 512 * 1024, - .periods_min = 1, - .periods_max = 128, - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0539-drm-v3d-Add-missing-implicit-synchronization.patch b/target/linux/brcm2708/patches-4.19/950-0539-drm-v3d-Add-missing-implicit-synchronization.patch new file mode 100644 index 0000000000..9c902c64d3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0539-drm-v3d-Add-missing-implicit-synchronization.patch @@ -0,0 +1,279 @@ +From 7713f79b0a5473eb0b8456d36b99ae00815dd8a1 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 27 Mar 2019 17:44:40 -0700 +Subject: [PATCH] drm/v3d: Add missing implicit synchronization. + +It is the expectation of existing userspace (X11 + Mesa, in +particular) that jobs submitted to the kernel against a shared BO will +get implicitly synchronized by their submission order. If we want to +allow clever userspace to disable implicit synchronization, we should +do that under its own submit flag (as amdgpu and lima do). + +Note that we currently only implicitly sync for the rendering pass, +not binning -- if you texture-from-pixmap in the binning vertex shader +(vertex coordinate generation), you'll miss out on synchronization. + +Fixes flickering when multiple clients are running in parallel, +particularly GL apps and compositors. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/v3d/v3d_drv.h | 10 +--- + drivers/gpu/drm/v3d/v3d_gem.c | 98 ++++++++++++++++++++++++++++++--- + drivers/gpu/drm/v3d/v3d_sched.c | 45 ++------------- + 3 files changed, 96 insertions(+), 57 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -186,8 +186,9 @@ struct v3d_job { + struct v3d_bo **bo; + u32 bo_count; + +- /* An optional fence userspace can pass in for the job to depend on. */ +- struct dma_fence *in_fence; ++ struct dma_fence **deps; ++ int deps_count; ++ int deps_size; + + /* v3d fence to be signaled by IRQ handler when the job is complete. */ + struct dma_fence *irq_fence; +@@ -219,11 +220,6 @@ struct v3d_bin_job { + struct v3d_render_job { + struct v3d_job base; + +- /* Optional fence for the binner, to depend on before starting +- * our job. +- */ +- struct dma_fence *bin_done_fence; +- + /* GPU virtual addresses of the start/end of the CL job. */ + u32 start, end; + +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -218,6 +218,71 @@ v3d_unlock_bo_reservations(struct v3d_bo + ww_acquire_fini(acquire_ctx); + } + ++static int ++v3d_add_dep(struct v3d_job *job, struct dma_fence *fence) ++{ ++ if (!fence) ++ return 0; ++ ++ if (job->deps_size == job->deps_count) { ++ int new_deps_size = max(job->deps_size * 2, 4); ++ struct dma_fence **new_deps = ++ krealloc(job->deps, new_deps_size * sizeof(*new_deps), ++ GFP_KERNEL); ++ if (!new_deps) { ++ dma_fence_put(fence); ++ return -ENOMEM; ++ } ++ ++ job->deps = new_deps; ++ job->deps_size = new_deps_size; ++ } ++ ++ job->deps[job->deps_count++] = fence; ++ ++ return 0; ++} ++ ++/** ++ * Adds the required implicit fences before executing the job ++ * ++ * Userspace (X11 + Mesa) requires that a job submitted against a shared BO ++ * from one fd will implicitly synchronize against previous jobs submitted ++ * against that BO from other fds. ++ * ++ * Currently we don't bother trying to track the shared BOs, and instead just ++ * sync everything. However, our synchronization is only for the render pass ++ * -- the binning stage (VS coordinate calculations) ignores implicit sync, ++ * since using shared buffers for texture coordinates seems unlikely, and ++ * implicitly syncing them would break bin/render parallelism. If we want to ++ * fix that, we should introduce a flag when VS texturing has been used in the ++ * binning stage, or a set of flags for which BOs are sampled during binning. ++ */ ++static int ++v3d_add_implicit_fences(struct v3d_job *job, struct v3d_bo *bo) ++{ ++ int i, ret, nr_fences; ++ struct dma_fence **fences; ++ ++ ret = reservation_object_get_fences_rcu(bo->resv, NULL, ++ &nr_fences, &fences); ++ if (ret || !nr_fences) ++ return ret; ++ ++ for (i = 0; i < nr_fences; i++) { ++ ret = v3d_add_dep(job, fences[i]); ++ if (ret) ++ break; ++ } ++ ++ /* Free any remaining fences after error. */ ++ for (; i < nr_fences; i++) ++ dma_fence_put(fences[i]); ++ kfree(fences); ++ ++ return ret; ++} ++ + /* Takes the reservation lock on all the BOs being referenced, so that + * at queue submit time we can update the reservations. + * +@@ -226,10 +291,11 @@ v3d_unlock_bo_reservations(struct v3d_bo + * to v3d, so we don't attach dma-buf fences to them. + */ + static int +-v3d_lock_bo_reservations(struct v3d_bo **bos, +- int bo_count, ++v3d_lock_bo_reservations(struct v3d_job *job, + struct ww_acquire_ctx *acquire_ctx) + { ++ struct v3d_bo **bos = job->bo; ++ int bo_count = job->bo_count; + int contended_lock = -1; + int i, ret; + +@@ -281,6 +347,13 @@ retry: + * before we commit the CL to the hardware. + */ + for (i = 0; i < bo_count; i++) { ++ ret = v3d_add_implicit_fences(job, bos[i]); ++ if (ret) { ++ v3d_unlock_bo_reservations(bos, bo_count, ++ acquire_ctx); ++ return ret; ++ } ++ + ret = reservation_object_reserve_shared(bos[i]->resv); + if (ret) { + v3d_unlock_bo_reservations(bos, bo_count, +@@ -383,7 +456,10 @@ v3d_job_free(struct kref *ref) + } + kvfree(job->bo); + +- dma_fence_put(job->in_fence); ++ for (i = 0; i < job->deps_count; i++) ++ dma_fence_put(job->deps[i]); ++ kfree(job->deps); ++ + dma_fence_put(job->irq_fence); + dma_fence_put(job->done_fence); + +@@ -464,15 +540,20 @@ v3d_job_init(struct v3d_dev *v3d, struct + struct v3d_job *job, void (*free)(struct kref *ref), + u32 in_sync) + { ++ struct dma_fence *in_fence = NULL; + int ret; + + job->v3d = v3d; + job->free = free; + +- ret = drm_syncobj_find_fence(file_priv, in_sync, 0, &job->in_fence); ++ ret = drm_syncobj_find_fence(file_priv, in_sync, 0, &in_fence); + if (ret == -EINVAL) + return ret; + ++ ret = v3d_add_dep(job, in_fence); ++ if (ret) ++ return ret; ++ + kref_init(&job->refcount); + + return 0; +@@ -590,8 +671,7 @@ v3d_submit_cl_ioctl(struct drm_device *d + if (ret) + goto fail; + +- ret = v3d_lock_bo_reservations(render->base.bo, render->base.bo_count, +- &acquire_ctx); ++ ret = v3d_lock_bo_reservations(&render->base, &acquire_ctx); + if (ret) + goto fail; + +@@ -601,7 +681,8 @@ v3d_submit_cl_ioctl(struct drm_device *d + if (ret) + goto fail_unreserve; + +- render->bin_done_fence = dma_fence_get(bin->base.done_fence); ++ ret = v3d_add_dep(&render->base, ++ dma_fence_get(bin->base.done_fence)); + } + + ret = v3d_push_job(v3d_priv, &render->base, V3D_RENDER); +@@ -692,8 +773,7 @@ v3d_submit_tfu_ioctl(struct drm_device * + } + spin_unlock(&file_priv->table_lock); + +- ret = v3d_lock_bo_reservations(job->base.bo, job->base.bo_count, +- &acquire_ctx); ++ ret = v3d_lock_bo_reservations(&job->base, &acquire_ctx); + if (ret) + goto fail; + +--- a/drivers/gpu/drm/v3d/v3d_sched.c ++++ b/drivers/gpu/drm/v3d/v3d_sched.c +@@ -67,47 +67,10 @@ v3d_job_dependency(struct drm_sched_job + struct drm_sched_entity *s_entity) + { + struct v3d_job *job = to_v3d_job(sched_job); +- struct dma_fence *fence; +- +- fence = job->in_fence; +- if (fence) { +- job->in_fence = NULL; +- return fence; +- } +- +- return NULL; +-} + +-/** +- * Returns the fences that the render job depends on, one by one. +- * v3d_job_run() won't be called until all of them have been signaled. +- */ +-static struct dma_fence * +-v3d_render_job_dependency(struct drm_sched_job *sched_job, +- struct drm_sched_entity *s_entity) +-{ +- struct v3d_render_job *job = to_render_job(sched_job); +- struct dma_fence *fence; +- +- fence = v3d_job_dependency(sched_job, s_entity); +- if (fence) +- return fence; +- +- /* If we had a bin job, the render job definitely depends on +- * it. We first have to wait for bin to be scheduled, so that +- * its done_fence is created. +- */ +- fence = job->bin_done_fence; +- if (fence) { +- job->bin_done_fence = NULL; +- return fence; +- } +- +- /* XXX: Wait on a fence for switching the GMP if necessary, +- * and then do so. +- */ +- +- return fence; ++ if (!job->deps_count) ++ return NULL; ++ return job->deps[--job->deps_count]; + } + + static struct dma_fence *v3d_bin_job_run(struct drm_sched_job *sched_job) +@@ -329,7 +292,7 @@ static const struct drm_sched_backend_op + }; + + static const struct drm_sched_backend_ops v3d_render_sched_ops = { +- .dependency = v3d_render_job_dependency, ++ .dependency = v3d_job_dependency, + .run_job = v3d_render_job_run, + .timedout_job = v3d_render_job_timedout, + .free_job = v3d_job_free, diff --git a/target/linux/brcm2708/patches-4.19/950-0540-bcmgenet-constrain-max-DMA-burst-length.patch b/target/linux/brcm2708/patches-4.19/950-0540-bcmgenet-constrain-max-DMA-burst-length.patch deleted file mode 100644 index 55af70e98f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0540-bcmgenet-constrain-max-DMA-burst-length.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 12865021c91e21ca7189c6a84688459d400de204 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Wed, 12 Sep 2018 14:44:53 +0100 -Subject: [PATCH 540/806] bcmgenet: constrain max DMA burst length - ---- - drivers/net/ethernet/broadcom/genet/bcmgenet.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h -+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h -@@ -31,7 +31,7 @@ - #define ENET_PAD 8 - #define ENET_MAX_MTU_SIZE (ETH_DATA_LEN + ETH_HLEN + VLAN_HLEN + \ - ENET_BRCM_TAG_LEN + ETH_FCS_LEN + ENET_PAD) --#define DMA_MAX_BURST_LENGTH 0x10 -+#define DMA_MAX_BURST_LENGTH 0x08 - - /* misc. configuration */ - #define CLEAR_ALL_HFB 0xFF diff --git a/target/linux/brcm2708/patches-4.19/950-0540-drm-vc4-Fix-synchronization-firmwarekms-against-GL-r.patch b/target/linux/brcm2708/patches-4.19/950-0540-drm-vc4-Fix-synchronization-firmwarekms-against-GL-r.patch new file mode 100644 index 0000000000..6a3a6b142d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0540-drm-vc4-Fix-synchronization-firmwarekms-against-GL-r.patch @@ -0,0 +1,44 @@ +From b0fedd829bb6725fef7b2667c85badc6b4a8e5e0 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 28 Mar 2019 11:58:51 -0700 +Subject: [PATCH] drm/vc4: Fix synchronization firmwarekms against GL + rendering. + +We would present the framebuffer immediately without waiting for +rendering to finish first, resulting in stuttering and flickering as a +window was dragged around when the GPU was busy enough to not just win +the race. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -15,6 +15,7 @@ + */ + + #include "drm/drm_atomic_helper.h" ++#include "drm/drm_gem_framebuffer_helper.h" + #include "drm/drm_plane_helper.h" + #include "drm/drm_crtc_helper.h" + #include "drm/drm_fourcc.h" +@@ -291,7 +292,7 @@ static const struct drm_plane_funcs vc4_ + }; + + static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { +- .prepare_fb = NULL, ++ .prepare_fb = drm_gem_fb_prepare_fb, + .cleanup_fb = NULL, + .atomic_check = vc4_plane_atomic_check, + .atomic_update = vc4_primary_plane_atomic_update, +@@ -299,7 +300,7 @@ static const struct drm_plane_helper_fun + }; + + static const struct drm_plane_helper_funcs vc4_cursor_plane_helper_funcs = { +- .prepare_fb = NULL, ++ .prepare_fb = drm_gem_fb_prepare_fb, + .cleanup_fb = NULL, + .atomic_check = vc4_plane_atomic_check, + .atomic_update = vc4_cursor_plane_atomic_update, diff --git a/target/linux/brcm2708/patches-4.19/950-0541-bcmgenet-Better-coalescing-parameter-defaults.patch b/target/linux/brcm2708/patches-4.19/950-0541-bcmgenet-Better-coalescing-parameter-defaults.patch deleted file mode 100644 index f91643342f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0541-bcmgenet-Better-coalescing-parameter-defaults.patch +++ /dev/null @@ -1,43 +0,0 @@ -From bb3075a2edb5c55d0ea7470da8bb44cc9f36aa02 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 27 Mar 2019 13:45:46 +0000 -Subject: [PATCH 541/806] bcmgenet: Better coalescing parameter defaults - -Set defaults for TX and RX packet coalescing to be equivalent to: - - # ethtool -C eth0 tx-frames 10 - # ethtool -C eth0 rx-usecs 50 - -This may be something we want to set via DT parameters in the -future. - -Signed-off-by: Phil Elwell ---- - drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - ---- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c -+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c -@@ -2147,7 +2147,7 @@ static void bcmgenet_init_tx_ring(struct - - bcmgenet_tdma_ring_writel(priv, index, 0, TDMA_PROD_INDEX); - bcmgenet_tdma_ring_writel(priv, index, 0, TDMA_CONS_INDEX); -- bcmgenet_tdma_ring_writel(priv, index, 1, DMA_MBUF_DONE_THRESH); -+ bcmgenet_tdma_ring_writel(priv, index, 10, DMA_MBUF_DONE_THRESH); - /* Disable rate control for now */ - bcmgenet_tdma_ring_writel(priv, index, flow_period_val, - TDMA_FLOW_PERIOD); -@@ -3576,9 +3576,12 @@ static int bcmgenet_probe(struct platfor - netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1); - - /* Set default coalescing parameters */ -- for (i = 0; i < priv->hw_params->rx_queues; i++) -+ for (i = 0; i < priv->hw_params->rx_queues; i++) { - priv->rx_rings[i].rx_max_coalesced_frames = 1; -+ priv->rx_rings[i].rx_coalesce_usecs = 50; -+ } - priv->rx_rings[DESC_INDEX].rx_max_coalesced_frames = 1; -+ priv->rx_rings[DESC_INDEX].rx_coalesce_usecs = 50; - - /* libphy will determine the link state */ - netif_carrier_off(dev); diff --git a/target/linux/brcm2708/patches-4.19/950-0541-drm-vc4-Make-sure-that-vblank-waits-work-without-v3d.patch b/target/linux/brcm2708/patches-4.19/950-0541-drm-vc4-Make-sure-that-vblank-waits-work-without-v3d.patch new file mode 100644 index 0000000000..32eba1c885 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0541-drm-vc4-Make-sure-that-vblank-waits-work-without-v3d.patch @@ -0,0 +1,27 @@ +From 561918ec5e668f9d940051737d861ee0592816f6 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 29 Mar 2019 12:04:36 -0700 +Subject: [PATCH] drm/vc4: Make sure that vblank waits work without v3d + loaded. + +This flag exists to protect legacy drivers, but when vc4's v3d doesn't +probe, it doesn't get set up by vc4_v3d.c's call of drm_irq_install. +This resulted in applications running as fast as possible, and laggy +performance from compton as it had to wait for the latest rendering by +the application for its presentation. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_kms.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -422,6 +422,7 @@ int vc4_kms_load(struct drm_device *dev) + /* Set support for vblank irq fast disable, before drm_vblank_init() */ + dev->vblank_disable_immediate = true; + ++ dev->irq_enabled = true; + ret = drm_vblank_init(dev, dev->mode_config.num_crtc); + if (ret < 0) { + dev_err(dev->dev, "failed to initialize vblank\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0542-drm-vc4-Expose-the-format-modifiers-for-firmware-kms.patch b/target/linux/brcm2708/patches-4.19/950-0542-drm-vc4-Expose-the-format-modifiers-for-firmware-kms.patch new file mode 100644 index 0000000000..7eb5a95f68 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0542-drm-vc4-Expose-the-format-modifiers-for-firmware-kms.patch @@ -0,0 +1,80 @@ +From c7fc1e1cf922bd548ac983ef48b883b6f83e35ae Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 18 Mar 2019 16:38:32 -0700 +Subject: [PATCH] drm/vc4: Expose the format modifiers for firmware + kms. + +This should technically not expose VC4_T_TILED on pi4. However, if we +don't expose anything, then userspace will assume that display can +handle whatever modifiers 3d can do (UIF on 2711). By exposing a +list, that will get intersected with what 3D can do so that we get T +tiling for display on 2710 and linear on 2711. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 33 +++++++++++++++++++++++++- + 1 file changed, 32 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -281,6 +281,27 @@ static void vc4_plane_destroy(struct drm + drm_plane_cleanup(plane); + } + ++static bool vc4_fkms_format_mod_supported(struct drm_plane *plane, ++ uint32_t format, ++ uint64_t modifier) ++{ ++ /* Support T_TILING for RGB formats only. */ ++ switch (format) { ++ case DRM_FORMAT_XRGB8888: ++ case DRM_FORMAT_ARGB8888: ++ switch (modifier) { ++ case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: ++ case DRM_FORMAT_MOD_LINEAR: ++ case DRM_FORMAT_MOD_BROADCOM_UIF: ++ return true; ++ default: ++ return false; ++ } ++ default: ++ return false; ++ } ++} ++ + static const struct drm_plane_funcs vc4_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, +@@ -289,6 +310,7 @@ static const struct drm_plane_funcs vc4_ + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, ++ .format_mod_supported = vc4_fkms_format_mod_supported, + }; + + static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { +@@ -316,6 +338,14 @@ static struct drm_plane *vc4_fkms_plane_ + u32 argb8888 = DRM_FORMAT_ARGB8888; + int ret = 0; + bool primary = (type == DRM_PLANE_TYPE_PRIMARY); ++ static const uint64_t modifiers[] = { ++ DRM_FORMAT_MOD_LINEAR, ++ /* VC4_T_TILED should come after linear, because we ++ * would prefer to scan out linear (less bus traffic). ++ */ ++ DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED, ++ DRM_FORMAT_MOD_INVALID, ++ }; + + vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), + GFP_KERNEL); +@@ -327,7 +357,8 @@ static struct drm_plane *vc4_fkms_plane_ + plane = &vc4_plane->base; + ret = drm_universal_plane_init(dev, plane, 0xff, + &vc4_plane_funcs, +- primary ? &xrgb8888 : &argb8888, 1, NULL, ++ primary ? &xrgb8888 : &argb8888, 1, ++ modifiers, + type, primary ? "primary" : "cursor"); + + if (type == DRM_PLANE_TYPE_PRIMARY) { diff --git a/target/linux/brcm2708/patches-4.19/950-0542-net-genet-enable-link-energy-detect-powerdown-for-ex.patch b/target/linux/brcm2708/patches-4.19/950-0542-net-genet-enable-link-energy-detect-powerdown-for-ex.patch deleted file mode 100644 index 02b5701099..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0542-net-genet-enable-link-energy-detect-powerdown-for-ex.patch +++ /dev/null @@ -1,31 +0,0 @@ -From d8b59e9245f8b2a231eeaa35b4a42f30cdbd5304 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Tue, 14 May 2019 17:17:59 +0100 -Subject: [PATCH 542/806] net: genet: enable link energy detect powerdown for - external PHYs - -There are several warts surrounding bcmgenet_mii_probe() as this -function is called from ndo_open, but it's calling registration-type -functions. The probe should be called at probe time and refactored -such that the PHY device data can be extracted to limit the scope -of this flag to Broadcom PHYs. - -For now, pass this flag in as it puts our attached PHY into a low-power -state when disconnected. - -Signed-off-by: Jonathan Bell ---- - drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/genet/bcmmii.c -+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c -@@ -318,6 +318,8 @@ int bcmgenet_mii_probe(struct net_device - /* Communicate the integrated PHY revision */ - if (priv->internal_phy) - phy_flags = priv->gphy_rev; -+ else -+ phy_flags = PHY_BRCM_AUTO_PWRDWN_ENABLE; - - /* Initialize link state variables that bcmgenet_mii_setup() uses */ - priv->old_link = -1; diff --git a/target/linux/brcm2708/patches-4.19/950-0543-drm-vc4-Fix-vblank-timestamping-for-firmwarekms.patch b/target/linux/brcm2708/patches-4.19/950-0543-drm-vc4-Fix-vblank-timestamping-for-firmwarekms.patch new file mode 100644 index 0000000000..4fb6f66625 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0543-drm-vc4-Fix-vblank-timestamping-for-firmwarekms.patch @@ -0,0 +1,45 @@ +From c0041a9fe33d6031267d9f3e2372833908e97337 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Tue, 2 Apr 2019 13:29:00 -0700 +Subject: [PATCH] drm/vc4: Fix vblank timestamping for firmwarekms. + +The core doesn't expect a false return from the scanoutpos function in +normal usage, so we were doing the precise vblank timestamping path +and thus "immediate" vblank disables (even though firmwarekms can't +actually disable vblanks interrupts, sigh), and the kernel would get +confused when getting timestamp info when also turning vblanks back +on. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 3 --- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 ++++++ + 2 files changed, 6 insertions(+), 3 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -133,9 +133,6 @@ bool vc4_crtc_get_scanoutpos(struct drm_ + int vblank_lines; + bool ret = false; + +- if (vc4->firmware_kms) +- return 0; +- + /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ + + /* Get optional system timestamp before query. */ +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -673,6 +673,12 @@ static int vc4_fkms_bind(struct device * + + vc4->firmware_kms = true; + ++ /* firmware kms doesn't have precise a scanoutpos implementation, so ++ * we can't do the precise vblank timestamp mode. ++ */ ++ drm->driver->get_scanout_position = NULL; ++ drm->driver->get_vblank_timestamp = NULL; ++ + vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); + if (!vc4_crtc) + return -ENOMEM; diff --git a/target/linux/brcm2708/patches-4.19/950-0543-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch b/target/linux/brcm2708/patches-4.19/950-0543-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch deleted file mode 100644 index 633ec4714c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0543-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 8eb54bbd5e6ebb929d390432163589f4c3dc0c14 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Tue, 14 May 2019 17:00:41 +0100 -Subject: [PATCH 543/806] phy: broadcom: split out the BCM54213PE from the - BCM54210E IDs - -The last nibble is a revision ID, and the 54213pe is a later rev -than the 54210e. Running the 54210e setup code on a 54213pe results -in a broken RGMII interface. - -Signed-off-by: Jonathan Bell ---- - drivers/net/phy/broadcom.c | 17 ++++++++++++++--- - include/linux/brcmphy.h | 1 + - 2 files changed, 15 insertions(+), 3 deletions(-) - ---- a/drivers/net/phy/broadcom.c -+++ b/drivers/net/phy/broadcom.c -@@ -222,7 +222,8 @@ static void bcm54xx_adjust_rxrefclk(stru - /* Abort if we are using an untested phy. */ - if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 && - BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 && -- BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M) -+ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M && -+ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54213PE) - return; - - val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); -@@ -604,7 +605,7 @@ static struct phy_driver broadcom_driver - .config_intr = bcm_phy_config_intr, - }, { - .phy_id = PHY_ID_BCM54210E, -- .phy_id_mask = 0xfffffff0, -+ .phy_id_mask = 0xffffffff, - .name = "Broadcom BCM54210E", - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, -@@ -612,6 +613,15 @@ static struct phy_driver broadcom_driver - .ack_interrupt = bcm_phy_ack_intr, - .config_intr = bcm_phy_config_intr, - }, { -+ .phy_id = PHY_ID_BCM54213PE, -+ .phy_id_mask = 0xffffffff, -+ .name = "Broadcom BCM54213PE", -+ .features = PHY_GBIT_FEATURES, -+ .flags = PHY_HAS_INTERRUPT, -+ .config_init = bcm54xx_config_init, -+ .ack_interrupt = bcm_phy_ack_intr, -+ .config_intr = bcm_phy_config_intr, -+}, { - .phy_id = PHY_ID_BCM5461, - .phy_id_mask = 0xfffffff0, - .name = "Broadcom BCM5461", -@@ -748,7 +758,8 @@ module_phy_driver(broadcom_drivers); - static struct mdio_device_id __maybe_unused broadcom_tbl[] = { - { PHY_ID_BCM5411, 0xfffffff0 }, - { PHY_ID_BCM5421, 0xfffffff0 }, -- { PHY_ID_BCM54210E, 0xfffffff0 }, -+ { PHY_ID_BCM54210E, 0xffffffff }, -+ { PHY_ID_BCM54213PE, 0xffffffff }, - { PHY_ID_BCM5461, 0xfffffff0 }, - { PHY_ID_BCM54612E, 0xfffffff0 }, - { PHY_ID_BCM54616S, 0xfffffff0 }, ---- a/include/linux/brcmphy.h -+++ b/include/linux/brcmphy.h -@@ -20,6 +20,7 @@ - #define PHY_ID_BCM5411 0x00206070 - #define PHY_ID_BCM5421 0x002060e0 - #define PHY_ID_BCM54210E 0x600d84a0 -+#define PHY_ID_BCM54213PE 0x600d84a2 - #define PHY_ID_BCM5464 0x002060b0 - #define PHY_ID_BCM5461 0x002060c0 - #define PHY_ID_BCM54612E 0x03625e60 diff --git a/target/linux/brcm2708/patches-4.19/950-0544-gpu-vc4-fkms-Switch-to-the-newer-mailbox-frame-buffe.patch b/target/linux/brcm2708/patches-4.19/950-0544-gpu-vc4-fkms-Switch-to-the-newer-mailbox-frame-buffe.patch new file mode 100644 index 0000000000..ad729c54aa --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0544-gpu-vc4-fkms-Switch-to-the-newer-mailbox-frame-buffe.patch @@ -0,0 +1,216 @@ +From 3819888738de087ba726ceaa2ab20503f164f1ed Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 26 Mar 2019 14:43:06 +0000 +Subject: [PATCH] gpu: vc4-fkms: Switch to the newer mailbox frame + buffer API. + +The old mailbox FB API was ideally deprecated but still used by +the FKMS driver. +Update to the newer API. + +NB This needs current firmware that accepts ARM allocated buffers +through the newer API. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 109 +++++++++++---------- + include/soc/bcm2835/raspberrypi-firmware.h | 10 ++ + 2 files changed, 67 insertions(+), 52 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -28,6 +28,25 @@ + #include "vc4_regs.h" + #include + ++struct fb_alloc_tags { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 xres, yres; ++ struct rpi_firmware_property_tag_header tag2; ++ u32 xres_virtual, yres_virtual; ++ struct rpi_firmware_property_tag_header tag3; ++ u32 bpp; ++ struct rpi_firmware_property_tag_header tag4; ++ u32 xoffset, yoffset; ++ struct rpi_firmware_property_tag_header tag5; ++ u32 base, screen_size; ++ struct rpi_firmware_property_tag_header tag6; ++ u32 pitch; ++ struct rpi_firmware_property_tag_header tag7; ++ u32 alpha_mode; ++ struct rpi_firmware_property_tag_header tag8; ++ u32 layer; ++}; ++ + /* The firmware delivers a vblank interrupt to us through the SMI + * hardware, which has only this one register. + */ +@@ -121,45 +140,39 @@ static void vc4_primary_plane_atomic_upd + struct drm_plane_state *old_state) + { + struct vc4_dev *vc4 = to_vc4_dev(plane->dev); +- struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); + struct drm_plane_state *state = plane->state; + struct drm_framebuffer *fb = state->fb; + struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); +- volatile struct fbinfo_s *fbinfo = vc4_plane->fbinfo; ++ u32 format = fb->format->format; ++ struct fb_alloc_tags fbinfo = { ++ .tag1 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT, ++ 8, 0, }, ++ .xres = state->crtc_w, ++ .yres = state->crtc_h, ++ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT, ++ 8, 0, }, ++ .xres_virtual = state->crtc_w, ++ .yres_virtual = state->crtc_h, ++ .tag3 = { RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH, 4, 0 }, ++ .bpp = 32, ++ .tag4 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET, 8, 0 }, ++ .xoffset = 0, ++ .yoffset = 0, ++ .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, ++ .base = bo->paddr + fb->offsets[0], ++ .screen_size = state->crtc_w * state->crtc_h * 4, ++ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, ++ .pitch = fb->pitches[0], ++ .tag7 = { RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE, 4, 0 }, ++ .alpha_mode = format == DRM_FORMAT_ARGB8888 ? 0 : 2, ++ .tag8 = { RPI_FIRMWARE_FRAMEBUFFER_SET_LAYER, 4, 0 }, ++ .layer = -127, ++ }; + u32 bpp = 32; + int ret; + +- fbinfo->xres = state->crtc_w; +- fbinfo->yres = state->crtc_h; +- fbinfo->xres_virtual = state->crtc_w; +- fbinfo->yres_virtual = state->crtc_h; +- fbinfo->bpp = bpp; +- fbinfo->xoffset = state->crtc_x; +- fbinfo->yoffset = state->crtc_y; +- fbinfo->base = bo->paddr + fb->offsets[0]; +- fbinfo->pitch = fb->pitches[0]; +- + if (fb->modifier == DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED) +- fbinfo->bpp |= BIT(31); +- +- /* A bug in the firmware makes it so that if the fb->base is +- * set to nonzero, the configured pitch gets overwritten with +- * the previous pitch. So, to get the configured pitch +- * recomputed, we have to make it allocate itself a new buffer +- * in VC memory, first. +- */ +- if (vc4_plane->pitch != fb->pitches[0]) { +- u32 saved_base = fbinfo->base; +- fbinfo->base = 0; +- +- ret = rpi_firmware_transaction(vc4->firmware, +- RPI_FIRMWARE_CHAN_FB, +- vc4_plane->fbinfo_bus_addr); +- fbinfo->base = saved_base; +- +- vc4_plane->pitch = fbinfo->pitch; +- WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); +- } ++ fbinfo.bpp |= BIT(31); + + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%pad/%d\n", + plane->base.id, plane->name, +@@ -168,14 +181,13 @@ static void vc4_primary_plane_atomic_upd + bpp, + state->crtc_x, + state->crtc_y, +- &fbinfo->base, ++ &fbinfo.base, + fb->pitches[0]); + +- ret = rpi_firmware_transaction(vc4->firmware, +- RPI_FIRMWARE_CHAN_FB, +- vc4_plane->fbinfo_bus_addr); +- WARN_ON_ONCE(fbinfo->pitch != fb->pitches[0]); +- WARN_ON_ONCE(fbinfo->base != bo->paddr + fb->offsets[0]); ++ ret = rpi_firmware_property_list(vc4->firmware, &fbinfo, ++ sizeof(fbinfo)); ++ WARN_ON_ONCE(fbinfo.pitch != fb->pitches[0]); ++ WARN_ON_ONCE(fbinfo.base != bo->paddr + fb->offsets[0]); + + /* If the CRTC is on (or going to be on) and we're enabled, + * then unblank. Otherwise, stay blank until CRTC enable. +@@ -332,10 +344,10 @@ static const struct drm_plane_helper_fun + static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, + enum drm_plane_type type) + { ++ /* Primary and cursor planes only */ + struct drm_plane *plane = NULL; + struct vc4_fkms_plane *vc4_plane; +- u32 xrgb8888 = DRM_FORMAT_XRGB8888; +- u32 argb8888 = DRM_FORMAT_ARGB8888; ++ u32 formats[] = {DRM_FORMAT_ARGB8888, DRM_FORMAT_XRGB8888}; + int ret = 0; + bool primary = (type == DRM_PLANE_TYPE_PRIMARY); + static const uint64_t modifiers[] = { +@@ -357,22 +369,15 @@ static struct drm_plane *vc4_fkms_plane_ + plane = &vc4_plane->base; + ret = drm_universal_plane_init(dev, plane, 0xff, + &vc4_plane_funcs, +- primary ? &xrgb8888 : &argb8888, 1, +- modifiers, ++ formats, primary ? 2 : 1, modifiers, + type, primary ? "primary" : "cursor"); + +- if (type == DRM_PLANE_TYPE_PRIMARY) { +- vc4_plane->fbinfo = +- dma_alloc_coherent(dev->dev, +- sizeof(*vc4_plane->fbinfo), +- &vc4_plane->fbinfo_bus_addr, +- GFP_KERNEL); +- memset(vc4_plane->fbinfo, 0, sizeof(*vc4_plane->fbinfo)); +- ++ if (type == DRM_PLANE_TYPE_PRIMARY) + drm_plane_helper_add(plane, &vc4_primary_plane_helper_funcs); +- } else { ++ else + drm_plane_helper_add(plane, &vc4_cursor_plane_helper_funcs); +- } ++ ++ drm_plane_create_alpha_property(plane); + + return plane; + fail: +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -111,9 +111,15 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009, + RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a, + RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_LAYER = 0x0004000c, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_TRANSFORM = 0x0004000d, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_VSYNC = 0x0004000e, + RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, + RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, + RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, + RPI_FIRMWARE_FRAMEBUFFER_TEST_DEPTH = 0x00044005, +@@ -122,6 +128,8 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009, + RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b, ++ RPI_FIRMWARE_FRAMEBUFFER_TEST_LAYER = 0x0004400c, ++ RPI_FIRMWARE_FRAMEBUFFER_TEST_TRANSFORM = 0x0004400d, + RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e, + RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, +@@ -134,6 +142,8 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, + RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_LAYER = 0x0004800c, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_TRANSFORM = 0x0004800d, + RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, + + RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, diff --git a/target/linux/brcm2708/patches-4.19/950-0544-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch b/target/linux/brcm2708/patches-4.19/950-0544-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch deleted file mode 100644 index 8c620803db..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0544-phy-bcm54213pe-configure-the-LED-outputs-to-be-more-.patch +++ /dev/null @@ -1,64 +0,0 @@ -From dc2550fdfd0a46c3ec67e5003b3d69c29141406b Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Fri, 17 May 2019 13:31:21 +0100 -Subject: [PATCH 544/806] phy: bcm54213pe: configure the LED outputs to be more - user-friendly - -The default state was both LEDs indicating link speed. - -Change the default configuration to -- Amber: 1000/100 link speed indication -- Green: link present + activity indication - -Signed-off-by: Jonathan Bell ---- - drivers/net/phy/broadcom.c | 17 +++++++++++++++++ - include/linux/brcmphy.h | 4 ++++ - 2 files changed, 21 insertions(+) - ---- a/drivers/net/phy/broadcom.c -+++ b/drivers/net/phy/broadcom.c -@@ -52,6 +52,21 @@ static int bcm54210e_config_init(struct - return 0; - } - -+static void bcm54213pe_config_init(struct phy_device *phydev) -+{ -+ u16 val; -+ -+ /* Enable ACT+LINK indication on ACTIVITY trigger */ -+ val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_LEDCTL); -+ val |= BCM54XX_SHD_LEDCTL_ACTLINK_EN; -+ bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDCTL, val); -+ -+ /* Set ACTIVITY on LED "1" output, LINKSPD[1] on LED "3" output */ -+ val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) | -+ BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD1); -+ bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val); -+} -+ - static int bcm54612e_config_init(struct phy_device *phydev) - { - int reg; -@@ -310,6 +325,8 @@ static int bcm54xx_config_init(struct ph - err = bcm54210e_config_init(phydev); - if (err) - return err; -+ } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54213PE) { -+ bcm54213pe_config_init(phydev); - } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) { - err = bcm54612e_config_init(phydev); - if (err) ---- a/include/linux/brcmphy.h -+++ b/include/linux/brcmphy.h -@@ -168,6 +168,10 @@ - #define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002 - #define BCM54XX_SHD_SCR3_TRDDAPD 0x0004 - -+/* 01001: Additional LED trigger options */ -+#define BCM54XX_SHD_LEDCTL 0x09 -+#define BCM54XX_SHD_LEDCTL_ACTLINK_EN 0x0010 -+ - /* 01010: Auto Power-Down */ - #define BCM54XX_SHD_APD 0x0a - #define BCM_APD_CLR_MASK 0xFE9F /* clear bits 5, 6 & 8 */ diff --git a/target/linux/brcm2708/patches-4.19/950-0545-drm-vc4-Add-an-overlay-plane-to-vc4-firmware-kms.patch b/target/linux/brcm2708/patches-4.19/950-0545-drm-vc4-Add-an-overlay-plane-to-vc4-firmware-kms.patch new file mode 100644 index 0000000000..f3e2851087 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0545-drm-vc4-Add-an-overlay-plane-to-vc4-firmware-kms.patch @@ -0,0 +1,853 @@ +From 953d85d97f59691dccbbca743c478a8b01f92b59 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 27 Mar 2019 17:45:01 +0000 +Subject: [PATCH] drm: vc4: Add an overlay plane to vc4-firmware-kms + +This uses a new API that is exposed via the mailbox service +to stick an element straight on the screen using DispmanX. + +The primary and cursor planes have also been switched to using +the new plane API, and it supports layering based on the DRM +zpos parameter. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 518 ++++++++++++++------- + drivers/gpu/drm/vc4/vc4_kms.c | 1 + + drivers/gpu/drm/vc4/vc_image_types.h | 143 ++++++ + include/soc/bcm2835/raspberrypi-firmware.h | 2 + + 4 files changed, 495 insertions(+), 169 deletions(-) + create mode 100644 drivers/gpu/drm/vc4/vc_image_types.h + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -26,8 +26,46 @@ + #include "linux/of_device.h" + #include "vc4_drv.h" + #include "vc4_regs.h" ++#include "vc_image_types.h" + #include + ++struct set_plane { ++ u8 display; ++ u8 plane_id; ++ u8 vc_image_type; ++ s8 layer; ++ ++ u16 width; ++ u16 height; ++ ++ u16 pitch; ++ u16 vpitch; ++ ++ u32 src_x; /* 16p16 */ ++ u32 src_y; /* 16p16 */ ++ ++ u32 src_w; /* 16p16 */ ++ u32 src_h; /* 16p16 */ ++ ++ s16 dst_x; ++ s16 dst_y; ++ ++ u16 dst_w; ++ u16 dst_h; ++ ++ u8 alpha; ++ u8 num_planes; ++ u8 is_vu; ++ u8 padding; ++ ++ u32 planes[4]; /* DMA address of each plane */ ++}; ++ ++struct mailbox_set_plane { ++ struct rpi_firmware_property_tag_header tag; ++ struct set_plane plane; ++}; ++ + struct fb_alloc_tags { + struct rpi_firmware_property_tag_header tag1; + u32 xres, yres; +@@ -47,6 +85,79 @@ struct fb_alloc_tags { + u32 layer; + }; + ++static const struct vc_image_format { ++ u32 drm; /* DRM_FORMAT_* */ ++ u32 vc_image; /* VC_IMAGE_* */ ++ u32 is_vu; ++} vc_image_formats[] = { ++ { ++ .drm = DRM_FORMAT_XRGB8888, ++ .vc_image = VC_IMAGE_XRGB8888, ++ }, ++ { ++ .drm = DRM_FORMAT_ARGB8888, ++ .vc_image = VC_IMAGE_ARGB8888, ++ }, ++/* ++ * FIXME: Need to resolve which DRM format goes to which vc_image format ++ * for the remaining RGBA and RGBX formats. ++ * { ++ * .drm = DRM_FORMAT_ABGR8888, ++ * .vc_image = VC_IMAGE_RGBA8888, ++ * }, ++ * { ++ * .drm = DRM_FORMAT_XBGR8888, ++ * .vc_image = VC_IMAGE_RGBA8888, ++ * }, ++ */ ++ { ++ .drm = DRM_FORMAT_RGB565, ++ .vc_image = VC_IMAGE_RGB565, ++ }, ++ { ++ .drm = DRM_FORMAT_RGB888, ++ .vc_image = VC_IMAGE_BGR888, ++ }, ++ { ++ .drm = DRM_FORMAT_BGR888, ++ .vc_image = VC_IMAGE_RGB888, ++ }, ++ { ++ .drm = DRM_FORMAT_YUV422, ++ .vc_image = VC_IMAGE_YUV422PLANAR, ++ }, ++ { ++ .drm = DRM_FORMAT_YUV420, ++ .vc_image = VC_IMAGE_YUV420, ++ }, ++ { ++ .drm = DRM_FORMAT_YVU420, ++ .vc_image = VC_IMAGE_YUV420, ++ .is_vu = 1, ++ }, ++ { ++ .drm = DRM_FORMAT_NV12, ++ .vc_image = VC_IMAGE_YUV420SP, ++ }, ++ { ++ .drm = DRM_FORMAT_NV21, ++ .vc_image = VC_IMAGE_YUV420SP, ++ .is_vu = 1, ++ }, ++}; ++ ++static const struct vc_image_format *vc4_get_vc_image_fmt(u32 drm_format) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < ARRAY_SIZE(vc_image_formats); i++) { ++ if (vc_image_formats[i].drm == drm_format) ++ return &vc_image_formats[i]; ++ } ++ ++ return NULL; ++} ++ + /* The firmware delivers a vblank interrupt to us through the SMI + * hardware, which has only this one register. + */ +@@ -113,6 +224,7 @@ struct vc4_fkms_plane { + struct fbinfo_s *fbinfo; + dma_addr_t fbinfo_bus_addr; + u32 pitch; ++ struct mailbox_set_plane mb; + }; + + static inline struct vc4_fkms_plane *to_vc4_fkms_plane(struct drm_plane *plane) +@@ -120,165 +232,183 @@ static inline struct vc4_fkms_plane *to_ + return (struct vc4_fkms_plane *)plane; + } + +-/* Turns the display on/off. */ +-static int vc4_plane_set_primary_blank(struct drm_plane *plane, bool blank) ++static int vc4_plane_set_blank(struct drm_plane *plane, bool blank) + { + struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ struct mailbox_set_plane blank_mb = { ++ .tag = { RPI_FIRMWARE_SET_PLANE, sizeof(struct set_plane), 0 }, ++ .plane = { ++ .display = vc4_plane->mb.plane.display, ++ .plane_id = vc4_plane->mb.plane.plane_id, ++ } ++ }; ++ int ret; + +- u32 packet = blank; +- +- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary plane %s", ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] overlay plane %s", + plane->base.id, plane->name, + blank ? "blank" : "unblank"); + +- return rpi_firmware_property(vc4->firmware, +- RPI_FIRMWARE_FRAMEBUFFER_BLANK, +- &packet, sizeof(packet)); ++ if (blank) ++ ret = rpi_firmware_property_list(vc4->firmware, &blank_mb, ++ sizeof(blank_mb)); ++ else ++ ret = rpi_firmware_property_list(vc4->firmware, &vc4_plane->mb, ++ sizeof(vc4_plane->mb)); ++ ++ WARN_ONCE(ret, "%s: firmware call failed. Please update your firmware", ++ __func__); ++ return ret; + } + +-static void vc4_primary_plane_atomic_update(struct drm_plane *plane, +- struct drm_plane_state *old_state) ++static void vc4_plane_atomic_update(struct drm_plane *plane, ++ struct drm_plane_state *old_state) + { +- struct vc4_dev *vc4 = to_vc4_dev(plane->dev); + struct drm_plane_state *state = plane->state; + struct drm_framebuffer *fb = state->fb; + struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); +- u32 format = fb->format->format; +- struct fb_alloc_tags fbinfo = { +- .tag1 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT, +- 8, 0, }, +- .xres = state->crtc_w, +- .yres = state->crtc_h, +- .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT, +- 8, 0, }, +- .xres_virtual = state->crtc_w, +- .yres_virtual = state->crtc_h, +- .tag3 = { RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH, 4, 0 }, +- .bpp = 32, +- .tag4 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET, 8, 0 }, +- .xoffset = 0, +- .yoffset = 0, +- .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, +- .base = bo->paddr + fb->offsets[0], +- .screen_size = state->crtc_w * state->crtc_h * 4, +- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, +- .pitch = fb->pitches[0], +- .tag7 = { RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE, 4, 0 }, +- .alpha_mode = format == DRM_FORMAT_ARGB8888 ? 0 : 2, +- .tag8 = { RPI_FIRMWARE_FRAMEBUFFER_SET_LAYER, 4, 0 }, +- .layer = -127, +- }; +- u32 bpp = 32; +- int ret; ++ const struct drm_format_info *drm_fmt = fb->format; ++ const struct vc_image_format *vc_fmt = ++ vc4_get_vc_image_fmt(drm_fmt->format); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ struct mailbox_set_plane *mb = &vc4_plane->mb; ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); ++ int num_planes = fb->format->num_planes; ++ struct drm_display_mode *mode = &state->crtc->mode; + +- if (fb->modifier == DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED) +- fbinfo.bpp |= BIT(31); ++ mb->plane.vc_image_type = vc_fmt->vc_image; ++ mb->plane.width = fb->width; ++ mb->plane.height = fb->height; ++ mb->plane.pitch = fb->pitches[0]; ++ mb->plane.src_w = state->src_w; ++ mb->plane.src_h = state->src_h; ++ mb->plane.src_x = state->src_x; ++ mb->plane.src_y = state->src_y; ++ mb->plane.dst_w = state->crtc_w; ++ mb->plane.dst_h = state->crtc_h; ++ mb->plane.dst_x = state->crtc_x; ++ mb->plane.dst_y = state->crtc_y; ++ mb->plane.alpha = state->alpha >> 8; ++ mb->plane.layer = state->normalized_zpos ? ++ state->normalized_zpos : -127; ++ mb->plane.num_planes = num_planes; ++ mb->plane.is_vu = vc_fmt->is_vu; ++ mb->plane.planes[0] = bo->paddr + fb->offsets[0]; + +- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%pad/%d\n", ++ /* FIXME: If the dest rect goes off screen then clip the src rect so we ++ * don't have off-screen pixels. ++ */ ++ if (plane->type == DRM_PLANE_TYPE_CURSOR) { ++ /* There is no scaling on the cursor plane, therefore the calcs ++ * to alter the source crop as the cursor goes off the screen ++ * are simple. ++ */ ++ if (mb->plane.dst_x + mb->plane.dst_w > mode->hdisplay) { ++ mb->plane.dst_w = mode->hdisplay - mb->plane.dst_x; ++ mb->plane.src_w = (mode->hdisplay - mb->plane.dst_x) ++ << 16; ++ } ++ if (mb->plane.dst_y + mb->plane.dst_h > mode->vdisplay) { ++ mb->plane.dst_h = mode->vdisplay - mb->plane.dst_y; ++ mb->plane.src_h = (mode->vdisplay - mb->plane.dst_y) ++ << 16; ++ } ++ } ++ ++ if (num_planes > 1) { ++ /* Assume this must be YUV */ ++ /* Makes assumptions on the stride for the chroma planes as we ++ * can't easily plumb in non-standard pitches. ++ */ ++ mb->plane.planes[1] = bo->paddr + fb->offsets[1]; ++ if (num_planes > 2) ++ mb->plane.planes[2] = bo->paddr + fb->offsets[2]; ++ else ++ mb->plane.planes[2] = 0; ++ ++ /* Special case the YUV420 with U and V as line interleaved ++ * planes as we have special handling for that case. ++ */ ++ if (num_planes == 3 && ++ (fb->offsets[2] - fb->offsets[1]) == fb->pitches[1]) ++ mb->plane.vc_image_type = VC_IMAGE_YUV420_S; ++ } else { ++ mb->plane.planes[1] = 0; ++ mb->plane.planes[2] = 0; ++ } ++ mb->plane.planes[3] = 0; ++ ++ switch (fb->modifier) { ++ case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: ++ switch (mb->plane.vc_image_type) { ++ case VC_IMAGE_RGBX32: ++ mb->plane.vc_image_type = VC_IMAGE_TF_RGBX32; ++ break; ++ case VC_IMAGE_RGBA32: ++ mb->plane.vc_image_type = VC_IMAGE_TF_RGBA32; ++ break; ++ case VC_IMAGE_RGB565: ++ mb->plane.vc_image_type = VC_IMAGE_TF_RGB565; ++ break; ++ } ++ break; ++ case DRM_FORMAT_MOD_BROADCOM_SAND128: ++ mb->plane.vc_image_type = VC_IMAGE_YUV_UV; ++ mb->plane.pitch = fourcc_mod_broadcom_param(fb->modifier); ++ break; ++ } ++ ++ if (vc4_crtc) { ++ mb->plane.dst_x += vc4_crtc->overscan[0]; ++ mb->plane.dst_y += vc4_crtc->overscan[1]; ++ } ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane update %dx%d@%d +dst(%d,%d, %d,%d) +src(%d,%d, %d,%d) 0x%08x/%08x/%08x/%d, alpha %u zpos %u\n", + plane->base.id, plane->name, +- state->crtc_w, +- state->crtc_h, +- bpp, ++ mb->plane.width, ++ mb->plane.height, ++ mb->plane.vc_image_type, + state->crtc_x, + state->crtc_y, +- &fbinfo.base, +- fb->pitches[0]); +- +- ret = rpi_firmware_property_list(vc4->firmware, &fbinfo, +- sizeof(fbinfo)); +- WARN_ON_ONCE(fbinfo.pitch != fb->pitches[0]); +- WARN_ON_ONCE(fbinfo.base != bo->paddr + fb->offsets[0]); +- +- /* If the CRTC is on (or going to be on) and we're enabled, ++ state->crtc_w, ++ state->crtc_h, ++ mb->plane.src_x, ++ mb->plane.src_y, ++ mb->plane.src_w, ++ mb->plane.src_h, ++ mb->plane.planes[0], ++ mb->plane.planes[1], ++ mb->plane.planes[2], ++ fb->pitches[0], ++ state->alpha, ++ state->normalized_zpos); ++ ++ /* ++ * Do NOT set now, as we haven't checked if the crtc is active or not. ++ * Set from vc4_plane_set_blank instead. ++ * ++ * If the CRTC is on (or going to be on) and we're enabled, + * then unblank. Otherwise, stay blank until CRTC enable. +- */ ++ */ + if (state->crtc->state->active) +- vc4_plane_set_primary_blank(plane, false); ++ vc4_plane_set_blank(plane, false); + } + +-static void vc4_primary_plane_atomic_disable(struct drm_plane *plane, +- struct drm_plane_state *old_state) ++static void vc4_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_plane_state *old_state) + { +- vc4_plane_set_primary_blank(plane, true); +-} +- +-static void vc4_cursor_plane_atomic_update(struct drm_plane *plane, +- struct drm_plane_state *old_state) +-{ +- struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ //struct vc4_dev *vc4 = to_vc4_dev(plane->dev); + struct drm_plane_state *state = plane->state; +- struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); +- struct drm_framebuffer *fb = state->fb; +- struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); +- dma_addr_t addr = bo->paddr + fb->offsets[0]; +- int ret; +- u32 packet_state[] = { +- state->crtc->state->active, +- state->crtc_x, +- state->crtc_y, +- 0 +- }; +- WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); + +- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%pad/%d)", ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n", + plane->base.id, plane->name, + state->crtc_w, + state->crtc_h, ++ vc4_plane->mb.plane.vc_image_type, + state->crtc_x, +- state->crtc_y, +- &addr, +- fb->pitches[0]); +- +- /* add on the top/left offsets when overscan is active */ +- if (vc4_crtc) { +- packet_state[1] += vc4_crtc->overscan[0]; +- packet_state[2] += vc4_crtc->overscan[1]; +- } +- +- ret = rpi_firmware_property(vc4->firmware, +- RPI_FIRMWARE_SET_CURSOR_STATE, +- &packet_state, +- sizeof(packet_state)); +- if (ret || packet_state[0] != 0) +- DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); +- +- /* Note: When the cursor contents change, the modesetting +- * driver calls drm_mode_cursor_univeral() with +- * DRM_MODE_CURSOR_BO, which means a new fb will be allocated. +- */ +- if (!old_state || +- state->crtc_w != old_state->crtc_w || +- state->crtc_h != old_state->crtc_h || +- fb != old_state->fb) { +- u32 packet_info[] = { state->crtc_w, state->crtc_h, +- 0, /* unused */ +- addr, +- 0, 0, /* hotx, hoty */}; +- +- ret = rpi_firmware_property(vc4->firmware, +- RPI_FIRMWARE_SET_CURSOR_INFO, +- &packet_info, +- sizeof(packet_info)); +- if (ret || packet_info[0] != 0) +- DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); +- } +-} +- +-static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, +- struct drm_plane_state *old_state) +-{ +- struct vc4_dev *vc4 = to_vc4_dev(plane->dev); +- u32 packet_state[] = { false, 0, 0, 0 }; +- int ret; +- +- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] disabling cursor", plane->base.id, plane->name); +- +- ret = rpi_firmware_property(vc4->firmware, +- RPI_FIRMWARE_SET_CURSOR_STATE, +- &packet_state, +- sizeof(packet_state)); +- if (ret || packet_state[0] != 0) +- DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); ++ state->crtc_y); ++ vc4_plane_set_blank(plane, true); + } + + static int vc4_plane_atomic_check(struct drm_plane *plane, +@@ -301,6 +431,7 @@ static bool vc4_fkms_format_mod_supporte + switch (format) { + case DRM_FORMAT_XRGB8888: + case DRM_FORMAT_ARGB8888: ++ case DRM_FORMAT_RGB565: + switch (modifier) { + case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: + case DRM_FORMAT_MOD_LINEAR: +@@ -309,8 +440,22 @@ static bool vc4_fkms_format_mod_supporte + default: + return false; + } ++ case DRM_FORMAT_NV12: ++ case DRM_FORMAT_NV21: ++ switch (fourcc_mod_broadcom_mod(modifier)) { ++ case DRM_FORMAT_MOD_LINEAR: ++ case DRM_FORMAT_MOD_BROADCOM_SAND128: ++ return true; ++ default: ++ return false; ++ } ++ case DRM_FORMAT_RGB888: ++ case DRM_FORMAT_BGR888: ++ case DRM_FORMAT_YUV422: ++ case DRM_FORMAT_YUV420: ++ case DRM_FORMAT_YVU420: + default: +- return false; ++ return (modifier == DRM_FORMAT_MOD_LINEAR); + } + } + +@@ -325,31 +470,24 @@ static const struct drm_plane_funcs vc4_ + .format_mod_supported = vc4_fkms_format_mod_supported, + }; + +-static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { +- .prepare_fb = drm_gem_fb_prepare_fb, +- .cleanup_fb = NULL, +- .atomic_check = vc4_plane_atomic_check, +- .atomic_update = vc4_primary_plane_atomic_update, +- .atomic_disable = vc4_primary_plane_atomic_disable, +-}; +- +-static const struct drm_plane_helper_funcs vc4_cursor_plane_helper_funcs = { ++static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = { + .prepare_fb = drm_gem_fb_prepare_fb, + .cleanup_fb = NULL, + .atomic_check = vc4_plane_atomic_check, +- .atomic_update = vc4_cursor_plane_atomic_update, +- .atomic_disable = vc4_cursor_plane_atomic_disable, ++ .atomic_update = vc4_plane_atomic_update, ++ .atomic_disable = vc4_plane_atomic_disable, + }; + + static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, +- enum drm_plane_type type) ++ enum drm_plane_type type, ++ u8 plane_id) + { +- /* Primary and cursor planes only */ + struct drm_plane *plane = NULL; + struct vc4_fkms_plane *vc4_plane; +- u32 formats[] = {DRM_FORMAT_ARGB8888, DRM_FORMAT_XRGB8888}; ++ u32 formats[ARRAY_SIZE(vc_image_formats)]; ++ unsigned int default_zpos; ++ u32 num_formats = 0; + int ret = 0; +- bool primary = (type == DRM_PLANE_TYPE_PRIMARY); + static const uint64_t modifiers[] = { + DRM_FORMAT_MOD_LINEAR, + /* VC4_T_TILED should come after linear, because we +@@ -358,6 +496,7 @@ static struct drm_plane *vc4_fkms_plane_ + DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED, + DRM_FORMAT_MOD_INVALID, + }; ++ int i; + + vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), + GFP_KERNEL); +@@ -366,19 +505,48 @@ static struct drm_plane *vc4_fkms_plane_ + goto fail; + } + ++ for (i = 0; i < ARRAY_SIZE(vc_image_formats); i++) ++ formats[num_formats++] = vc_image_formats[i].drm; ++ + plane = &vc4_plane->base; + ret = drm_universal_plane_init(dev, plane, 0xff, + &vc4_plane_funcs, +- formats, primary ? 2 : 1, modifiers, +- type, primary ? "primary" : "cursor"); ++ formats, num_formats, modifiers, ++ type, NULL); + +- if (type == DRM_PLANE_TYPE_PRIMARY) +- drm_plane_helper_add(plane, &vc4_primary_plane_helper_funcs); +- else +- drm_plane_helper_add(plane, &vc4_cursor_plane_helper_funcs); ++ drm_plane_helper_add(plane, &vc4_plane_helper_funcs); + + drm_plane_create_alpha_property(plane); + ++ /* ++ * Default frame buffer setup is with FB on -127, and raspistill etc ++ * tend to drop overlays on layer 2. Cursor plane was on layer +127. ++ * ++ * For F-KMS the mailbox call allows for a s8. ++ * Remap zpos 0 to -127 for the background layer, but leave all the ++ * other layers as requested by KMS. ++ */ ++ switch (type) { ++ case DRM_PLANE_TYPE_PRIMARY: ++ default_zpos = 0; ++ break; ++ case DRM_PLANE_TYPE_OVERLAY: ++ default_zpos = 1; ++ break; ++ case DRM_PLANE_TYPE_CURSOR: ++ default_zpos = 2; ++ break; ++ } ++ drm_plane_create_zpos_property(plane, default_zpos, 0, 127); ++ ++ /* Prepare the static elements of the mailbox structure */ ++ vc4_plane->mb.tag.tag = RPI_FIRMWARE_SET_PLANE; ++ vc4_plane->mb.tag.buf_size = sizeof(struct set_plane); ++ vc4_plane->mb.tag.req_resp_size = 0; ++ vc4_plane->mb.plane.display = 0; ++ vc4_plane->mb.plane.plane_id = plane_id; ++ vc4_plane->mb.plane.layer = default_zpos ? default_zpos : -127; ++ + return plane; + fail: + if (plane) +@@ -400,19 +568,23 @@ static void vc4_crtc_disable(struct drm_ + * whether anything scans out at all, but the firmware doesn't + * give us a CRTC-level control for that. + */ +- vc4_cursor_plane_atomic_disable(crtc->cursor, crtc->cursor->state); +- vc4_plane_set_primary_blank(crtc->primary, true); ++ ++ vc4_plane_atomic_disable(crtc->cursor, crtc->cursor->state); ++ vc4_plane_atomic_disable(crtc->primary, crtc->primary->state); ++ ++ /* FIXME: Disable overlay planes */ + } + + static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { + /* Unblank the planes (if they're supposed to be displayed). */ ++ + if (crtc->primary->state->fb) +- vc4_plane_set_primary_blank(crtc->primary, false); +- if (crtc->cursor->state->fb) { +- vc4_cursor_plane_atomic_update(crtc->cursor, +- crtc->cursor->state); +- } ++ vc4_plane_set_blank(crtc->primary, false); ++ if (crtc->cursor->state->fb) ++ vc4_plane_set_blank(crtc->cursor, crtc->cursor->state); ++ ++ /* FIXME: Enable overlay planes */ + } + + static int vc4_crtc_atomic_check(struct drm_crtc *crtc, +@@ -672,8 +844,10 @@ static int vc4_fkms_bind(struct device * + struct vc4_crtc *vc4_crtc; + struct vc4_fkms_encoder *vc4_encoder; + struct drm_crtc *crtc; +- struct drm_plane *primary_plane, *cursor_plane, *destroy_plane, *temp; ++ struct drm_plane *primary_plane, *overlay_plane, *cursor_plane; ++ struct drm_plane *destroy_plane, *temp; + struct device_node *firmware_node; ++ u32 blank = 1; + int ret; + + vc4->firmware_kms = true; +@@ -702,20 +876,26 @@ static int vc4_fkms_bind(struct device * + if (IS_ERR(vc4_crtc->regs)) + return PTR_ERR(vc4_crtc->regs); + +- /* For now, we create just the primary and the legacy cursor +- * planes. We should be able to stack more planes on easily, +- * but to do that we would need to compute the bandwidth +- * requirement of the plane configuration, and reject ones +- * that will take too much. +- */ +- primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY); ++ /* Blank the firmware provided framebuffer */ ++ rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_BLANK, ++ &blank, sizeof(blank)); ++ ++ primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY, 0); + if (IS_ERR(primary_plane)) { + dev_err(dev, "failed to construct primary plane\n"); + ret = PTR_ERR(primary_plane); + goto err; + } + +- cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR); ++ overlay_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_OVERLAY, 1); ++ if (IS_ERR(overlay_plane)) { ++ dev_err(dev, "failed to construct overlay plane\n"); ++ ret = PTR_ERR(overlay_plane); ++ goto err; ++ } ++ ++ cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR, 2); + if (IS_ERR(cursor_plane)) { + dev_err(dev, "failed to construct cursor plane\n"); + ret = PTR_ERR(cursor_plane); +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -435,6 +435,7 @@ int vc4_kms_load(struct drm_device *dev) + dev->mode_config.preferred_depth = 24; + dev->mode_config.async_page_flip = true; + dev->mode_config.allow_fb_modifiers = true; ++ dev->mode_config.normalize_zpos = true; + + drm_modeset_lock_init(&vc4->ctm_state_lock); + +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc_image_types.h +@@ -0,0 +1,143 @@ ++ ++/* ++ * Copyright (c) 2012, Broadcom Europe Ltd ++ * ++ * Values taken from vc_image_types.h released by Broadcom at ++ * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_types.h ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++enum { ++ VC_IMAGE_MIN = 0, //bounds for error checking ++ ++ VC_IMAGE_RGB565 = 1, ++ VC_IMAGE_1BPP, ++ VC_IMAGE_YUV420, ++ VC_IMAGE_48BPP, ++ VC_IMAGE_RGB888, ++ VC_IMAGE_8BPP, ++ /* 4bpp palettised image */ ++ VC_IMAGE_4BPP, ++ /* A separated format of 16 colour/light shorts followed by 16 z ++ * values ++ */ ++ VC_IMAGE_3D32, ++ /* 16 colours followed by 16 z values */ ++ VC_IMAGE_3D32B, ++ /* A separated format of 16 material/colour/light shorts followed by ++ * 16 z values ++ */ ++ VC_IMAGE_3D32MAT, ++ /* 32 bit format containing 18 bits of 6.6.6 RGB, 9 bits per short */ ++ VC_IMAGE_RGB2X9, ++ /* 32-bit format holding 18 bits of 6.6.6 RGB */ ++ VC_IMAGE_RGB666, ++ /* 4bpp palettised image with embedded palette */ ++ VC_IMAGE_PAL4_OBSOLETE, ++ /* 8bpp palettised image with embedded palette */ ++ VC_IMAGE_PAL8_OBSOLETE, ++ /* RGB888 with an alpha byte after each pixel */ ++ VC_IMAGE_RGBA32, ++ /* a line of Y (32-byte padded), a line of U (16-byte padded), and a ++ * line of V (16-byte padded) ++ */ ++ VC_IMAGE_YUV422, ++ /* RGB565 with a transparent patch */ ++ VC_IMAGE_RGBA565, ++ /* Compressed (4444) version of RGBA32 */ ++ VC_IMAGE_RGBA16, ++ /* VCIII codec format */ ++ VC_IMAGE_YUV_UV, ++ /* VCIII T-format RGBA8888 */ ++ VC_IMAGE_TF_RGBA32, ++ /* VCIII T-format RGBx8888 */ ++ VC_IMAGE_TF_RGBX32, ++ /* VCIII T-format float */ ++ VC_IMAGE_TF_FLOAT, ++ /* VCIII T-format RGBA4444 */ ++ VC_IMAGE_TF_RGBA16, ++ /* VCIII T-format RGB5551 */ ++ VC_IMAGE_TF_RGBA5551, ++ /* VCIII T-format RGB565 */ ++ VC_IMAGE_TF_RGB565, ++ /* VCIII T-format 8-bit luma and 8-bit alpha */ ++ VC_IMAGE_TF_YA88, ++ /* VCIII T-format 8 bit generic sample */ ++ VC_IMAGE_TF_BYTE, ++ /* VCIII T-format 8-bit palette */ ++ VC_IMAGE_TF_PAL8, ++ /* VCIII T-format 4-bit palette */ ++ VC_IMAGE_TF_PAL4, ++ /* VCIII T-format Ericsson Texture Compressed */ ++ VC_IMAGE_TF_ETC1, ++ /* RGB888 with R & B swapped */ ++ VC_IMAGE_BGR888, ++ /* RGB888 with R & B swapped, but with no pitch, i.e. no padding after ++ * each row of pixels ++ */ ++ VC_IMAGE_BGR888_NP, ++ /* Bayer image, extra defines which variant is being used */ ++ VC_IMAGE_BAYER, ++ /* General wrapper for codec images e.g. JPEG from camera */ ++ VC_IMAGE_CODEC, ++ /* VCIII codec format */ ++ VC_IMAGE_YUV_UV32, ++ /* VCIII T-format 8-bit luma */ ++ VC_IMAGE_TF_Y8, ++ /* VCIII T-format 8-bit alpha */ ++ VC_IMAGE_TF_A8, ++ /* VCIII T-format 16-bit generic sample */ ++ VC_IMAGE_TF_SHORT, ++ /* VCIII T-format 1bpp black/white */ ++ VC_IMAGE_TF_1BPP, ++ VC_IMAGE_OPENGL, ++ /* VCIII-B0 HVS YUV 4:4:4 interleaved samples */ ++ VC_IMAGE_YUV444I, ++ /* Y, U, & V planes separately (VC_IMAGE_YUV422 has them interleaved on ++ * a per line basis) ++ */ ++ VC_IMAGE_YUV422PLANAR, ++ /* 32bpp with 8bit alpha at MS byte, with R, G, B (LS byte) */ ++ VC_IMAGE_ARGB8888, ++ /* 32bpp with 8bit unused at MS byte, with R, G, B (LS byte) */ ++ VC_IMAGE_XRGB8888, ++ ++ /* interleaved 8 bit samples of Y, U, Y, V (4 flavours) */ ++ VC_IMAGE_YUV422YUYV, ++ VC_IMAGE_YUV422YVYU, ++ VC_IMAGE_YUV422UYVY, ++ VC_IMAGE_YUV422VYUY, ++ ++ /* 32bpp like RGBA32 but with unused alpha */ ++ VC_IMAGE_RGBX32, ++ /* 32bpp, corresponding to RGBA with unused alpha */ ++ VC_IMAGE_RGBX8888, ++ /* 32bpp, corresponding to BGRA with unused alpha */ ++ VC_IMAGE_BGRX8888, ++ ++ /* Y as a plane, then UV byte interleaved in plane with with same pitch, ++ * half height ++ */ ++ VC_IMAGE_YUV420SP, ++ ++ /* Y, U, & V planes separately 4:4:4 */ ++ VC_IMAGE_YUV444PLANAR, ++ ++ /* T-format 8-bit U - same as TF_Y8 buf from U plane */ ++ VC_IMAGE_TF_U8, ++ /* T-format 8-bit U - same as TF_Y8 buf from V plane */ ++ VC_IMAGE_TF_V8, ++ ++ /* YUV4:2:0 planar, 16bit values */ ++ VC_IMAGE_YUV420_16, ++ /* YUV4:2:0 codec format, 16bit values */ ++ VC_IMAGE_YUV_UV_16, ++ /* YUV4:2:0 with U,V in side-by-side format */ ++ VC_IMAGE_YUV420_S, ++ ++ VC_IMAGE_MAX, /* bounds for error checking */ ++ VC_IMAGE_FORCE_ENUM_16BIT = 0xffff, ++}; +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -148,6 +148,8 @@ enum rpi_firmware_property_tag { + + RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, + ++ RPI_FIRMWARE_SET_PLANE = 0x00048015, ++ + RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, + RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0545-dwc_otg-Choose-appropriate-IRQ-handover-strategy.patch b/target/linux/brcm2708/patches-4.19/950-0545-dwc_otg-Choose-appropriate-IRQ-handover-strategy.patch deleted file mode 100644 index db66e84a38..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0545-dwc_otg-Choose-appropriate-IRQ-handover-strategy.patch +++ /dev/null @@ -1,181 +0,0 @@ -From 856c8fdf68e589c89ed0518aab727c54fdff5afa Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 21 May 2019 13:36:52 +0100 -Subject: [PATCH 545/806] dwc_otg: Choose appropriate IRQ handover strategy - -2711 has no MPHI peripheral, but the ARM Control block can fake -interrupts. Use the size of the DTB "mphi" reg block to determine -which is required. - -Signed-off-by: Phil Elwell ---- - drivers/usb/host/dwc_otg/dwc_otg_driver.c | 9 +++-- - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 21 ++++++---- - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 2 + - drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 12 ++++-- - drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 41 +++++++++++++------- - drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 3 ++ - 6 files changed, 60 insertions(+), 28 deletions(-) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c -@@ -806,14 +806,15 @@ static int dwc_otg_driver_probe( - if (!request_mem_region(_dev->resource[1].start, - _dev->resource[1].end - _dev->resource[1].start + 1, - "dwc_otg")) { -- dev_dbg(&_dev->dev, "error reserving mapped memory\n"); -- retval = -EFAULT; -- goto fail; -- } -+ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); -+ retval = -EFAULT; -+ goto fail; -+ } - - dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start, - _dev->resource[1].end - - _dev->resource[1].start + 1); -+ dwc_otg_device->os_dep.use_swirq = (_dev->resource[1].end - _dev->resource[1].start) == 0x200; - } - - #else ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -@@ -1347,8 +1347,12 @@ void notrace dwc_otg_fiq_fsm(struct fiq_ - /* We got an interrupt, didn't handle it. */ - if (kick_irq) { - state->mphi_int_count++; -- FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); -- FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); -+ if (state->mphi_regs.swirq_set) { -+ FIQ_WRITE(state->mphi_regs.swirq_set, 1); -+ } else { -+ FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); -+ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); -+ } - - } - state->fiq_done++; -@@ -1406,11 +1410,14 @@ void notrace dwc_otg_fiq_nop(struct fiq_ - state->mphi_int_count++; - gintmsk.d32 &= state->gintmsk_saved.d32; - FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); -- /* Force a clear before another dummy send */ -- FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); -- FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); -- FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); -- -+ if (state->mphi_regs.swirq_set) { -+ FIQ_WRITE(state->mphi_regs.swirq_set, 1); -+ } else { -+ /* Force a clear before another dummy send */ -+ FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); -+ FIQ_WRITE(state->mphi_regs.outdda, state->dummy_send_dma); -+ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); -+ } - } - state->fiq_done++; - mb(); ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -@@ -118,6 +118,8 @@ typedef struct { - volatile void* outdda; - volatile void* outddb; - volatile void* intstat; -+ volatile void* swirq_set; -+ volatile void* swirq_clr; - } mphi_regs_t; - - enum fiq_debug_level { ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c -@@ -220,16 +220,20 @@ exit_handler_routine: - - /* The FIQ could have sneaked another interrupt in. If so, don't clear MPHI */ - if ((gintmsk_new.d32 == ~0) && (haintmsk_new.d32 == 0x0000FFFF)) { -+ if (dwc_otg_hcd->fiq_state->mphi_regs.swirq_clr) { -+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.swirq_clr, 1); -+ } else { - DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.intstat, (1<<16)); -- if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) { -- fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR"); -+ } -+ if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) { -+ fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR"); - DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, ((1<<31) + (1<<16))); - while (!(DWC_READ_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & (1 << 17))) - ; - DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, (1<<31)); - dwc_otg_hcd->fiq_state->mphi_int_count = 0; -- } -- int_done++; -+ } -+ int_done++; - } - haintmsk.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); - /* Re-enable interrupts that the FIQ masked (first time round) */ ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -@@ -474,22 +474,37 @@ static void hcd_init_fiq(void *cookie) - set_fiq_regs(®s); - #endif - -- //Set the mphi periph to the required registers -- dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; -- dwc_otg_hcd->fiq_state->mphi_regs.ctrl = otg_dev->os_dep.mphi_base + 0x4c; -- dwc_otg_hcd->fiq_state->mphi_regs.outdda = otg_dev->os_dep.mphi_base + 0x28; -- dwc_otg_hcd->fiq_state->mphi_regs.outddb = otg_dev->os_dep.mphi_base + 0x2c; -- dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50; - dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base; -- DWC_WARN("MPHI regs_base at %px", dwc_otg_hcd->fiq_state->mphi_regs.base); -- //Enable mphi peripheral -- writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); -+ //Set the mphi periph to the required registers -+ dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; -+ if (otg_dev->os_dep.use_swirq) { -+ dwc_otg_hcd->fiq_state->mphi_regs.swirq_set = -+ otg_dev->os_dep.mphi_base + 0x1f0; -+ dwc_otg_hcd->fiq_state->mphi_regs.swirq_clr = -+ otg_dev->os_dep.mphi_base + 0x1f4; -+ DWC_WARN("Fake MPHI regs_base at 0x%08x", -+ (int)dwc_otg_hcd->fiq_state->mphi_regs.base); -+ } else { -+ dwc_otg_hcd->fiq_state->mphi_regs.ctrl = -+ otg_dev->os_dep.mphi_base + 0x4c; -+ dwc_otg_hcd->fiq_state->mphi_regs.outdda -+ = otg_dev->os_dep.mphi_base + 0x28; -+ dwc_otg_hcd->fiq_state->mphi_regs.outddb -+ = otg_dev->os_dep.mphi_base + 0x2c; -+ dwc_otg_hcd->fiq_state->mphi_regs.intstat -+ = otg_dev->os_dep.mphi_base + 0x50; -+ DWC_WARN("MPHI regs_base at %px", -+ dwc_otg_hcd->fiq_state->mphi_regs.base); -+ -+ //Enable mphi peripheral -+ writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); - #ifdef DEBUG -- if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000) -- DWC_WARN("MPHI periph has been enabled"); -- else -- DWC_WARN("MPHI periph has NOT been enabled"); -+ if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000) -+ DWC_WARN("MPHI periph has been enabled"); -+ else -+ DWC_WARN("MPHI periph has NOT been enabled"); - #endif -+ } - // Enable FIQ interrupt from USB peripheral - #ifdef CONFIG_ARM64 - irq = otg_dev->os_dep.fiq_num; ---- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -@@ -102,6 +102,9 @@ typedef struct os_dependent { - /** Base address for MPHI peripheral */ - void *mphi_base; - -+ /** mphi_base actually points to the SWIRQ block */ -+ bool use_swirq; -+ - /** IRQ number (<0 if not valid) */ - int irq_num; - diff --git a/target/linux/brcm2708/patches-4.19/950-0546-drm-vc4-Increase-max-screen-size-to-4096x4096.patch b/target/linux/brcm2708/patches-4.19/950-0546-drm-vc4-Increase-max-screen-size-to-4096x4096.patch new file mode 100644 index 0000000000..c81e7fc919 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0546-drm-vc4-Increase-max-screen-size-to-4096x4096.patch @@ -0,0 +1,26 @@ +From 7c4a99448be56e288a5845f3de77b7eef006a450 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 3 Apr 2019 15:20:05 +0100 +Subject: [PATCH] drm: vc4: Increase max screen size to 4096x4096. + +We now should support 4k screens, therefore this limit needs to +be increased. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_kms.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -429,8 +429,8 @@ int vc4_kms_load(struct drm_device *dev) + return ret; + } + +- dev->mode_config.max_width = 2048; +- dev->mode_config.max_height = 2048; ++ dev->mode_config.max_width = 4096; ++ dev->mode_config.max_height = 4096; + dev->mode_config.funcs = &vc4_mode_funcs; + dev->mode_config.preferred_depth = 24; + dev->mode_config.async_page_flip = true; diff --git a/target/linux/brcm2708/patches-4.19/950-0546-usb-xhci-Disable-the-XHCI-5-second-timeout.patch b/target/linux/brcm2708/patches-4.19/950-0546-usb-xhci-Disable-the-XHCI-5-second-timeout.patch deleted file mode 100644 index f7c2ad866a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0546-usb-xhci-Disable-the-XHCI-5-second-timeout.patch +++ /dev/null @@ -1,29 +0,0 @@ -From ff7222c0771a5e28666335663571058e560ad32b Mon Sep 17 00:00:00 2001 -From: Tim Gover -Date: Fri, 22 Mar 2019 09:47:14 +0000 -Subject: [PATCH 546/806] usb: xhci: Disable the XHCI 5 second timeout - -If the VL805 EEPROM has not been programmed then boot will hang for five -seconds. The timeout seems to be arbitrary and is an unecessary -delay on the first boot. Remove the timeout. - -This is common code and probably can't be upstreamed unless the timeout -can be configurable somehow or perhaps the XHCI driver can be skipped -on the first boot. ---- - drivers/usb/host/xhci.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -196,8 +196,9 @@ int xhci_reset(struct xhci_hcd *xhci) - if (xhci->quirks & XHCI_INTEL_HOST) - udelay(1000); - -+ // Hack: reduce handshake timeout from 10s 0.5s due to unprogrammed vl805 - ret = xhci_handshake(&xhci->op_regs->command, -- CMD_RESET, 0, 10 * 1000 * 1000); -+ CMD_RESET, 0, 500 * 1000); - if (ret) - return ret; - diff --git a/target/linux/brcm2708/patches-4.19/950-0547-drm-vc4-Add-support-for-multiple-displays-to-fkms.patch b/target/linux/brcm2708/patches-4.19/950-0547-drm-vc4-Add-support-for-multiple-displays-to-fkms.patch new file mode 100644 index 0000000000..06f8cf4148 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0547-drm-vc4-Add-support-for-multiple-displays-to-fkms.patch @@ -0,0 +1,280 @@ +From 4817db177a74ac58671e1fe84d98d584375d9697 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 3 Apr 2019 17:15:45 +0100 +Subject: [PATCH] drm: vc4: Add support for multiple displays to fkms + +There is a slightly nasty hack in that all crtcs share the +same SMI interrupt from the firmware. This seems to currently +work well enough, but ought to be fixed at a later date. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 160 +++++++++++++++++-------- + 1 file changed, 113 insertions(+), 47 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -29,6 +29,8 @@ + #include "vc_image_types.h" + #include + ++#define PLANES_PER_CRTC 3 ++ + struct set_plane { + u8 display; + u8 plane_id; +@@ -175,6 +177,7 @@ struct vc4_crtc { + struct drm_pending_vblank_event *event; + u32 overscan[4]; + bool vblank_enabled; ++ u32 display_number; + }; + + static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) +@@ -480,6 +483,7 @@ static const struct drm_plane_helper_fun + + static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, + enum drm_plane_type type, ++ u8 display_num, + u8 plane_id) + { + struct drm_plane *plane = NULL; +@@ -543,7 +547,7 @@ static struct drm_plane *vc4_fkms_plane_ + vc4_plane->mb.tag.tag = RPI_FIRMWARE_SET_PLANE; + vc4_plane->mb.tag.buf_size = sizeof(struct set_plane); + vc4_plane->mb.tag.req_resp_size = 0; +- vc4_plane->mb.plane.display = 0; ++ vc4_plane->mb.plane.display = display_num; + vc4_plane->mb.plane.plane_id = plane_id; + vc4_plane->mb.plane.layer = default_zpos ? default_zpos : -127; + +@@ -630,16 +634,20 @@ static void vc4_crtc_handle_page_flip(st + + static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) + { +- struct vc4_crtc *vc4_crtc = data; +- u32 stat = readl(vc4_crtc->regs + SMICS); ++ struct vc4_crtc **crtc_list = data; ++ int i; ++ u32 stat = readl(crtc_list[0]->regs + SMICS); + irqreturn_t ret = IRQ_NONE; + + if (stat & SMICS_INTERRUPTS) { +- writel(0, vc4_crtc->regs + SMICS); +- if (vc4_crtc->vblank_enabled) +- drm_crtc_handle_vblank(&vc4_crtc->base); +- vc4_crtc_handle_page_flip(vc4_crtc); +- ret = IRQ_HANDLED; ++ writel(0, crtc_list[0]->regs + SMICS); ++ ++ for (i = 0; crtc_list[i]; i++) { ++ if (crtc_list[i]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[i]->base); ++ vc4_crtc_handle_page_flip(crtc_list[i]); ++ ret = IRQ_HANDLED; ++ } + } + + return ret; +@@ -836,66 +844,55 @@ static const struct drm_encoder_helper_f + .disable = vc4_fkms_encoder_disable, + }; + +-static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) ++static int vc4_fkms_create_screen(struct device *dev, struct drm_device *drm, ++ int display_idx, int display_ref, ++ struct vc4_crtc **ret_crtc) + { +- struct platform_device *pdev = to_platform_device(dev); +- struct drm_device *drm = dev_get_drvdata(master); + struct vc4_dev *vc4 = to_vc4_dev(drm); + struct vc4_crtc *vc4_crtc; + struct vc4_fkms_encoder *vc4_encoder; + struct drm_crtc *crtc; + struct drm_plane *primary_plane, *overlay_plane, *cursor_plane; + struct drm_plane *destroy_plane, *temp; +- struct device_node *firmware_node; + u32 blank = 1; + int ret; + +- vc4->firmware_kms = true; +- +- /* firmware kms doesn't have precise a scanoutpos implementation, so +- * we can't do the precise vblank timestamp mode. +- */ +- drm->driver->get_scanout_position = NULL; +- drm->driver->get_vblank_timestamp = NULL; +- + vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); + if (!vc4_crtc) + return -ENOMEM; + crtc = &vc4_crtc->base; + +- firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); +- vc4->firmware = rpi_firmware_get(firmware_node); +- if (!vc4->firmware) { +- DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); +- return -EPROBE_DEFER; +- } +- of_node_put(firmware_node); +- +- /* Map the SMI interrupt reg */ +- vc4_crtc->regs = vc4_ioremap_regs(pdev, 0); +- if (IS_ERR(vc4_crtc->regs)) +- return PTR_ERR(vc4_crtc->regs); ++ vc4_crtc->display_number = display_ref; + + /* Blank the firmware provided framebuffer */ + rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_FRAMEBUFFER_BLANK, + &blank, sizeof(blank)); + +- primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY, 0); ++ primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY, ++ display_ref, ++ 0 + (display_idx * PLANES_PER_CRTC) ++ ); + if (IS_ERR(primary_plane)) { + dev_err(dev, "failed to construct primary plane\n"); + ret = PTR_ERR(primary_plane); + goto err; + } + +- overlay_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_OVERLAY, 1); ++ overlay_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_OVERLAY, ++ display_ref, ++ 1 + (display_idx * PLANES_PER_CRTC) ++ ); + if (IS_ERR(overlay_plane)) { + dev_err(dev, "failed to construct overlay plane\n"); + ret = PTR_ERR(overlay_plane); + goto err; + } + +- cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR, 2); ++ cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR, ++ display_ref, ++ 2 + (display_idx * PLANES_PER_CRTC) ++ ); + if (IS_ERR(cursor_plane)) { + dev_err(dev, "failed to construct cursor plane\n"); + ret = PTR_ERR(cursor_plane); +@@ -922,13 +919,6 @@ static int vc4_fkms_bind(struct device * + goto err_destroy_encoder; + } + +- writel(0, vc4_crtc->regs + SMICS); +- ret = devm_request_irq(dev, platform_get_irq(pdev, 0), +- vc4_crtc_irq_handler, 0, "vc4 firmware kms", +- vc4_crtc); +- if (ret) +- goto err_destroy_connector; +- + ret = rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN, + &vc4_crtc->overscan, +@@ -938,7 +928,7 @@ static int vc4_fkms_bind(struct device * + memset(&vc4_crtc->overscan, 0, sizeof(vc4_crtc->overscan)); + } + +- platform_set_drvdata(pdev, vc4_crtc); ++ *ret_crtc = vc4_crtc; + + return 0; + +@@ -955,15 +945,91 @@ err: + return ret; + } + ++static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct device_node *firmware_node; ++ struct vc4_crtc **crtc_list; ++ u32 num_displays, display_num; ++ int ret; ++ const u32 display_num_lookup[] = {2, 7, 1}; ++ ++ vc4->firmware_kms = true; ++ ++ /* firmware kms doesn't have precise a scanoutpos implementation, so ++ * we can't do the precise vblank timestamp mode. ++ */ ++ drm->driver->get_scanout_position = NULL; ++ drm->driver->get_vblank_timestamp = NULL; ++ ++ firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); ++ vc4->firmware = rpi_firmware_get(firmware_node); ++ if (!vc4->firmware) { ++ DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); ++ return -EPROBE_DEFER; ++ } ++ of_node_put(firmware_node); ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS, ++ &num_displays, sizeof(u32)); ++ ++ /* If we fail to get the number of displays, or it returns 0, then ++ * assume old firmware that doesn't have the mailbox call, so just ++ * set one display ++ */ ++ if (ret || num_displays == 0) { ++ num_displays = 1; ++ DRM_WARN("Unable to determine number of displays's. Assuming 1\n"); ++ ret = 0; ++ } ++ ++ /* Allocate a list, with space for a NULL on the end */ ++ crtc_list = devm_kzalloc(dev, sizeof(crtc_list) * (num_displays + 1), ++ GFP_KERNEL); ++ if (!crtc_list) ++ return -ENOMEM; ++ ++ for (display_num = 0; display_num < num_displays; display_num++) { ++ ret = vc4_fkms_create_screen(dev, drm, display_num, ++ display_num_lookup[display_num], ++ &crtc_list[display_num]); ++ if (ret) ++ DRM_ERROR("Oh dear, failed to create display %u\n", ++ display_num); ++ } ++ ++ /* Map the SMI interrupt reg */ ++ crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(crtc_list[0]->regs)) ++ DRM_ERROR("Oh dear, failed to map registers\n"); ++ ++ writel(0, crtc_list[0]->regs + SMICS); ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), ++ vc4_crtc_irq_handler, 0, "vc4 firmware kms", ++ crtc_list); ++ if (ret) ++ DRM_ERROR("Oh dear, failed to register IRQ\n"); ++ ++ platform_set_drvdata(pdev, crtc_list); ++ ++ return 0; ++} ++ + static void vc4_fkms_unbind(struct device *dev, struct device *master, + void *data) + { + struct platform_device *pdev = to_platform_device(dev); +- struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev); ++ struct vc4_crtc **crtc_list = dev_get_drvdata(dev); ++ int i; + +- vc4_fkms_connector_destroy(vc4_crtc->connector); +- vc4_fkms_encoder_destroy(vc4_crtc->encoder); +- drm_crtc_cleanup(&vc4_crtc->base); ++ for (i = 0; crtc_list[i]; i++) { ++ vc4_fkms_connector_destroy(crtc_list[i]->connector); ++ vc4_fkms_encoder_destroy(crtc_list[i]->encoder); ++ drm_crtc_cleanup(&crtc_list[i]->base); ++ } + + platform_set_drvdata(pdev, NULL); + } diff --git a/target/linux/brcm2708/patches-4.19/950-0547-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch b/target/linux/brcm2708/patches-4.19/950-0547-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch deleted file mode 100644 index 496fb61525..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0547-usb-xhci-Show-that-the-VIA-VL805-supports-LPM.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 94a960e8933fb94b979f88c319aa54c304004b35 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 23 May 2019 15:08:30 +0100 -Subject: [PATCH 547/806] usb: xhci: Show that the VIA VL805 supports LPM - -Signed-off-by: Phil Elwell ---- - drivers/usb/host/xhci-pci.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/usb/host/xhci-pci.c -+++ b/drivers/usb/host/xhci-pci.c -@@ -222,6 +222,10 @@ static void xhci_pci_quirks(struct devic - pdev->device == 0x3432) - xhci->quirks |= XHCI_BROKEN_STREAMS; - -+ if (pdev->vendor == PCI_VENDOR_ID_VIA && -+ pdev->device == 0x3483) -+ xhci->quirks |= XHCI_LPM_SUPPORT; -+ - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && - pdev->device == 0x1042) - xhci->quirks |= XHCI_BROKEN_STREAMS; diff --git a/target/linux/brcm2708/patches-4.19/950-0548-drm-vc4-Fix-build-warning.patch b/target/linux/brcm2708/patches-4.19/950-0548-drm-vc4-Fix-build-warning.patch new file mode 100644 index 0000000000..3e6273afd3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0548-drm-vc4-Fix-build-warning.patch @@ -0,0 +1,21 @@ +From 52d2903959ff9a1d68701a04884e18b31d051f30 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 5 Apr 2019 17:21:56 +0100 +Subject: [PATCH] drm: vc4: Fix build warning + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -932,8 +932,6 @@ static int vc4_fkms_create_screen(struct + + return 0; + +-err_destroy_connector: +- vc4_fkms_connector_destroy(vc4_crtc->connector); + err_destroy_encoder: + vc4_fkms_encoder_destroy(vc4_crtc->encoder); + list_for_each_entry_safe(destroy_plane, temp, diff --git a/target/linux/brcm2708/patches-4.19/950-0548-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.mousep.patch b/target/linux/brcm2708/patches-4.19/950-0548-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.mousep.patch deleted file mode 100644 index bd332715fc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0548-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.mousep.patch +++ /dev/null @@ -1,122 +0,0 @@ -From fa776ef749c924cd3ff3ffa257d7a63a27224399 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Thu, 30 May 2019 10:38:40 +0100 -Subject: [PATCH 548/806] usb: xhci: hack xhci_urb_enqueue to support - hid.mousepoll behaviour - -xHCI creates endpoint contexts directly from the device's endpoint -data, so submitting URBs with urb->interval different from the hardware -interval has no effect. - -Add an explicit reconfiguration of the endpoint context when requested, -which will happen only when the interval is different from the cached -value. In practice, the reconfiguration only happens on the first URB -submitted for the endpoint. - -Signed-off-by: Jonathan Bell ---- - drivers/usb/host/xhci.c | 86 +++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 86 insertions(+) - ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -1425,6 +1425,87 @@ command_cleanup: - } - - /* -+ * RPI: Fixup endpoint intervals when requested -+ * - Check interval versus the (cached) endpoint context -+ * - set the endpoint interval to the new value -+ * - force an endpoint configure command -+ */ -+static void xhci_fixup_interval(struct xhci_hcd *xhci, struct urb *urb, -+ unsigned int slot_id, unsigned int ep_index) -+{ -+ struct xhci_ep_ctx *ep_ctx_out, *ep_ctx_in; -+ struct xhci_command *command; -+ struct xhci_input_control_ctx *ctrl_ctx; -+ struct xhci_virt_device *vdev; -+ int xhci_interval, ep_interval; -+ int ret; -+ unsigned long flags; -+ u32 ep_info_tmp; -+ -+ spin_lock_irqsave(&xhci->lock, flags); -+ -+ vdev = xhci->devs[slot_id]; -+ /* Get context-derived endpoint interval */ -+ ep_ctx_out = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index); -+ ep_ctx_in = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index); -+ xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx_out->ep_info)); -+ ep_interval = urb->interval * 8; -+ -+ if (ep_interval == xhci_interval) { -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ return; -+ } -+ -+ xhci_dbg(xhci, "Fixup interval ep_interval=%d xhci_interval=%d\n", -+ ep_interval, xhci_interval); -+ command = xhci_alloc_command_with_ctx(xhci, true, GFP_ATOMIC); -+ if (!command) { -+ /* Failure here is benign, poll at the original rate */ -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ return; -+ } -+ -+ /* xHCI uses exponents for intervals... */ -+ xhci_interval = fls(ep_interval) - 1; -+ xhci_interval = clamp_val(xhci_interval, 3, 10); -+ ep_info_tmp = le32_to_cpu(ep_ctx_out->ep_info); -+ ep_info_tmp &= ~EP_INTERVAL(255); -+ ep_info_tmp |= EP_INTERVAL(xhci_interval); -+ -+ /* Keep the endpoint context up-to-date while issuing the command. */ -+ xhci_endpoint_copy(xhci, vdev->in_ctx, -+ vdev->out_ctx, ep_index); -+ ep_ctx_in->ep_info = cpu_to_le32(ep_info_tmp); -+ -+ /* -+ * We need to drop the lock, so take an explicit copy -+ * of the ep context. -+ */ -+ xhci_endpoint_copy(xhci, command->in_ctx, vdev->in_ctx, ep_index); -+ -+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); -+ if (!ctrl_ctx) { -+ xhci_warn(xhci, -+ "%s: Could not get input context, bad type.\n", -+ __func__); -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ xhci_free_command(xhci, command); -+ return; -+ } -+ ctrl_ctx->add_flags = xhci_get_endpoint_flag_from_index(ep_index); -+ ctrl_ctx->drop_flags = 0; -+ -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ -+ ret = xhci_configure_endpoint(xhci, urb->dev, command, -+ false, false); -+ if (ret) -+ xhci_warn(xhci, "%s: Configure endpoint failed: %d\n", -+ __func__, ret); -+ xhci_free_command(xhci, command); -+} -+ -+/* - * non-error returns are a promise to giveback() the urb later - * we drop ownership so next owner (or urb unlink) can get it - */ -@@ -1492,6 +1573,11 @@ static int xhci_urb_enqueue(struct usb_h - } - } - -+ if (usb_endpoint_xfer_int(&urb->ep->desc) && -+ (urb->dev->speed == USB_SPEED_FULL || -+ urb->dev->speed == USB_SPEED_LOW)) -+ xhci_fixup_interval(xhci, urb, slot_id, ep_index); -+ - spin_lock_irqsave(&xhci->lock, flags); - - if (xhci->xhc_state & XHCI_STATE_DYING) { diff --git a/target/linux/brcm2708/patches-4.19/950-0549-drm-vc4-Select-display-to-blank-during-initialisatio.patch b/target/linux/brcm2708/patches-4.19/950-0549-drm-vc4-Select-display-to-blank-during-initialisatio.patch new file mode 100644 index 0000000000..0391767e48 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0549-drm-vc4-Select-display-to-blank-during-initialisatio.patch @@ -0,0 +1,54 @@ +From a267031f384a4433fdcd662a97bce7c4949d3fd6 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 5 Apr 2019 17:23:15 +0100 +Subject: [PATCH] drm: vc4: Select display to blank during + initialisation + +Otherwise the rainbow splash screen remained in the display list + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 18 ++++++++++++++---- + 1 file changed, 14 insertions(+), 4 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -87,6 +87,13 @@ struct fb_alloc_tags { + u32 layer; + }; + ++struct mailbox_blank_display { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 display; ++ struct rpi_firmware_property_tag_header tag2; ++ u32 blank; ++}; ++ + static const struct vc_image_format { + u32 drm; /* DRM_FORMAT_* */ + u32 vc_image; /* VC_IMAGE_* */ +@@ -854,7 +861,12 @@ static int vc4_fkms_create_screen(struct + struct drm_crtc *crtc; + struct drm_plane *primary_plane, *overlay_plane, *cursor_plane; + struct drm_plane *destroy_plane, *temp; +- u32 blank = 1; ++ struct mailbox_blank_display blank = { ++ .tag1 = {RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, 4, 0, }, ++ .display = display_idx, ++ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_BLANK, 4, 0, }, ++ .blank = 1, ++ }; + int ret; + + vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); +@@ -865,9 +877,7 @@ static int vc4_fkms_create_screen(struct + vc4_crtc->display_number = display_ref; + + /* Blank the firmware provided framebuffer */ +- rpi_firmware_property(vc4->firmware, +- RPI_FIRMWARE_FRAMEBUFFER_BLANK, +- &blank, sizeof(blank)); ++ rpi_firmware_property_list(vc4->firmware, &blank, sizeof(blank)); + + primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY, + display_ref, diff --git a/target/linux/brcm2708/patches-4.19/950-0549-pinctrl-bcm2835-Add-support-for-BCM2838.patch b/target/linux/brcm2708/patches-4.19/950-0549-pinctrl-bcm2835-Add-support-for-BCM2838.patch deleted file mode 100644 index 655937e303..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0549-pinctrl-bcm2835-Add-support-for-BCM2838.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 9fdab9bd6324314cbdfe96a6da5edef6c29ed5e6 Mon Sep 17 00:00:00 2001 -From: Tim Gover -Date: Wed, 9 Jan 2019 14:43:36 +0000 -Subject: [PATCH 549/806] pinctrl-bcm2835: Add support for BCM2838 - -GPIO configuration on BCM2838 is largely the same as BCM2835 except for -the pull up/down configuration. The old mechanism has been replaced -by new registers which don't require the fixed delay. - -Detect BCN2838 at run-time and use the new mechanism. Backwards -compatibility for the device-tree configuration has been retained. ---- - drivers/pinctrl/bcm/pinctrl-bcm2835.c | 58 ++++++++++++++++++++------- - 1 file changed, 44 insertions(+), 14 deletions(-) - ---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c -+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -67,6 +67,12 @@ - #define GPPUD 0x94 /* Pin Pull-up/down Enable */ - #define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */ - -+/* 2711 has a different mechanism for pin pull-up/down/enable */ -+#define GPPUPPDN0 0xe4 /* Pin pull-up/down for pins 15:0 */ -+#define GPPUPPDN1 0xe8 /* Pin pull-up/down for pins 31:16 */ -+#define GPPUPPDN2 0xec /* Pin pull-up/down for pins 47:32 */ -+#define GPPUPPDN3 0xf0 /* Pin pull-up/down for pins 57:48 */ -+ - #define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4)) - #define FSEL_SHIFT(p) (((p) % 10) * 3) - #define GPIO_REG_OFFSET(p) ((p) / 32) -@@ -915,21 +921,45 @@ static void bcm2835_pull_config_set(stru - unsigned int pin, unsigned int arg) - { - u32 off, bit; -+ /* BCM2835, BCM2836 & BCM2837 return 'gpio' for this unused register */ -+ int is_2835 = bcm2835_gpio_rd(pc, GPPUPPDN3) == 0x6770696f; - -- off = GPIO_REG_OFFSET(pin); -- bit = GPIO_REG_SHIFT(pin); -- -- bcm2835_gpio_wr(pc, GPPUD, arg & 3); -- /* -- * BCM2835 datasheet say to wait 150 cycles, but not of what. -- * But the VideoCore firmware delay for this operation -- * based nearly on the same amount of VPU cycles and this clock -- * runs at 250 MHz. -- */ -- udelay(1); -- bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); -- udelay(1); -- bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); -+ if (is_2835) { -+ off = GPIO_REG_OFFSET(pin); -+ bit = GPIO_REG_SHIFT(pin); -+ /* -+ * BCM2835 datasheet say to wait 150 cycles, but not of what. -+ * But the VideoCore firmware delay for this operation -+ * based nearly on the same amount of VPU cycles and this clock -+ * runs at 250 MHz. -+ */ -+ bcm2835_gpio_wr(pc, GPPUD, arg & 3); -+ udelay(1); -+ bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); -+ udelay(1); -+ bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); -+ } else { -+ u32 reg; -+ int lsb; -+ -+ off = (pin >> 4); -+ if (off > 3) -+ return; -+ lsb = (pin & 0xf) << 1; -+ -+ /* The up/down semantics are reversed compared to BCM2835. -+ * Instead of updating all the device tree files, translate the -+ * values here. -+ */ -+ if (arg == 2) -+ arg = 1; -+ else if (arg == 1) -+ arg = 2; -+ reg = bcm2835_gpio_rd(pc, GPPUPPDN0 + (off *4)); -+ reg &= ~(0x3 << lsb); -+ reg |= (arg & 3) << lsb; -+ bcm2835_gpio_wr(pc, GPPUPPDN0 + (off * 4), reg); -+ } - } - - static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev, diff --git a/target/linux/brcm2708/patches-4.19/950-0550-drm-vc4-Remove-now-unused-structure.patch b/target/linux/brcm2708/patches-4.19/950-0550-drm-vc4-Remove-now-unused-structure.patch new file mode 100644 index 0000000000..08c0995138 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0550-drm-vc4-Remove-now-unused-structure.patch @@ -0,0 +1,41 @@ +From 0bbbf4f4a618072e6987f439784f2d24a81b8f2d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 5 Apr 2019 17:24:20 +0100 +Subject: [PATCH] drm: vc4: Remove now unused structure. + +Cleaning up structure that was unused after +fbb59a2 drm: vc4: Add an overlay plane to vc4-firmware-kms + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 19 ------------------- + 1 file changed, 19 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -68,25 +68,6 @@ struct mailbox_set_plane { + struct set_plane plane; + }; + +-struct fb_alloc_tags { +- struct rpi_firmware_property_tag_header tag1; +- u32 xres, yres; +- struct rpi_firmware_property_tag_header tag2; +- u32 xres_virtual, yres_virtual; +- struct rpi_firmware_property_tag_header tag3; +- u32 bpp; +- struct rpi_firmware_property_tag_header tag4; +- u32 xoffset, yoffset; +- struct rpi_firmware_property_tag_header tag5; +- u32 base, screen_size; +- struct rpi_firmware_property_tag_header tag6; +- u32 pitch; +- struct rpi_firmware_property_tag_header tag7; +- u32 alpha_mode; +- struct rpi_firmware_property_tag_header tag8; +- u32 layer; +-}; +- + struct mailbox_blank_display { + struct rpi_firmware_property_tag_header tag1; + u32 display; diff --git a/target/linux/brcm2708/patches-4.19/950-0550-spi-bcm2835-enable-shared-interrupt-support.patch b/target/linux/brcm2708/patches-4.19/950-0550-spi-bcm2835-enable-shared-interrupt-support.patch deleted file mode 100644 index 9c0a956215..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0550-spi-bcm2835-enable-shared-interrupt-support.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 21dd7cd6dc231287b92a8c8b9ecf9d0844c2d325 Mon Sep 17 00:00:00 2001 -From: Martin Sperl -Date: Mon, 13 May 2019 11:05:27 +0000 -Subject: [PATCH 550/806] spi: bcm2835: enable shared interrupt support - -Add shared interrupt support for this driver. - -Signed-off-by: Martin Sperl ---- - drivers/spi/spi-bcm2835.c | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - ---- a/drivers/spi/spi-bcm2835.c -+++ b/drivers/spi/spi-bcm2835.c -@@ -150,6 +150,10 @@ static irqreturn_t bcm2835_spi_interrupt - struct spi_master *master = dev_id; - struct bcm2835_spi *bs = spi_master_get_devdata(master); - -+ /* check if we got interrupt enabled */ -+ if (!(bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_INTR)) -+ return IRQ_NONE; -+ - /* Read as many bytes as possible from FIFO */ - bcm2835_rd_fifo(bs); - /* Write as many bytes as possible to FIFO */ -@@ -756,7 +760,8 @@ static int bcm2835_spi_probe(struct plat - bcm2835_wr(bs, BCM2835_SPI_CS, - BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); - -- err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0, -+ err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, -+ IRQF_SHARED, - dev_name(&pdev->dev), master); - if (err) { - dev_err(&pdev->dev, "could not request IRQ: %d\n", err); diff --git a/target/linux/brcm2708/patches-4.19/950-0551-drivers-char-add-chardev-for-mmap-ing-Argon-control-.patch b/target/linux/brcm2708/patches-4.19/950-0551-drivers-char-add-chardev-for-mmap-ing-Argon-control-.patch deleted file mode 100644 index 0601ecb872..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0551-drivers-char-add-chardev-for-mmap-ing-Argon-control-.patch +++ /dev/null @@ -1,320 +0,0 @@ -From 0be0d6439128366a8d2ac0afaf88f19209171e51 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Thu, 9 May 2019 14:30:37 +0100 -Subject: [PATCH 551/806] drivers: char: add chardev for mmap'ing Argon control - registers - -Based on the gpiomem driver, allow mapping of the decoder register -spaces such that userspace can access control/status registers. -This driver is intended for use with a custom ffmpeg backend accelerator -prior to a v4l2 driver being written. - -Signed-off-by: Jonathan Bell ---- - drivers/char/broadcom/Kconfig | 8 + - drivers/char/broadcom/Makefile | 1 + - drivers/char/broadcom/argon-mem.c | 277 ++++++++++++++++++++++++++++++ - 3 files changed, 286 insertions(+) - create mode 100644 drivers/char/broadcom/argon-mem.c - ---- a/drivers/char/broadcom/Kconfig -+++ b/drivers/char/broadcom/Kconfig -@@ -49,3 +49,11 @@ config BCM2835_SMI_DEV - This driver provides a character device interface (ioctl + read/write) to - Broadcom's Secondary Memory interface. The low-level functionality is provided - by the SMI driver itself. -+ -+config ARGON_MEM -+ tristate "Character device driver for the Argon decoder hardware" -+ default n -+ help -+ This driver provides a character device interface for memory-map operations -+ so userspace tools can access the control and status registers of the Argon -+ video decoder hardware. ---- a/drivers/char/broadcom/Makefile -+++ b/drivers/char/broadcom/Makefile -@@ -4,3 +4,4 @@ obj-$(CONFIG_BCM_VC_SM) += vc_sm - - obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o - obj-$(CONFIG_BCM2835_SMI_DEV) += bcm2835_smi_dev.o -+obj-$(CONFIG_ARGON_MEM) += argon-mem.o ---- /dev/null -+++ b/drivers/char/broadcom/argon-mem.c -@@ -0,0 +1,277 @@ -+/** -+ * argon-mem.c - character device access to the Argon decoder registers -+ * -+ * Based on bcm2835-gpiomem.c. Provides IO memory access to the decoder -+ * register blocks such that ffmpeg plugins can access the hardware. -+ * -+ * Jonathan Bell -+ * Copyright (c) 2019, Raspberry Pi (Trading) Ltd. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2, as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRIVER_NAME "argon-mem" -+#define DEVICE_MINOR 0 -+ -+struct argon_mem_priv { -+ dev_t devid; -+ struct class *class; -+ struct cdev argon_mem_cdev; -+ unsigned long regs_phys; -+ unsigned long mem_window_len; -+ struct device *dev; -+ const char *name; -+}; -+ -+static int argon_mem_open(struct inode *inode, struct file *file) -+{ -+ int dev = iminor(inode); -+ int ret = 0; -+ struct argon_mem_priv *priv; -+ if (dev != DEVICE_MINOR) -+ ret = -ENXIO; -+ -+ priv = container_of(inode->i_cdev, struct argon_mem_priv, -+ argon_mem_cdev); -+ if (!priv) -+ return -EINVAL; -+ file->private_data = priv; -+ return ret; -+} -+ -+static int argon_mem_release(struct inode *inode, struct file *file) -+{ -+ int dev = iminor(inode); -+ int ret = 0; -+ -+ if (dev != DEVICE_MINOR) -+ ret = -ENXIO; -+ -+ return ret; -+} -+ -+static const struct vm_operations_struct argon_mem_vm_ops = { -+#ifdef CONFIG_HAVE_IOREMAP_PROT -+ .access = generic_access_phys -+#endif -+}; -+ -+static int argon_mem_mmap(struct file *file, struct vm_area_struct *vma) -+{ -+ struct argon_mem_priv *priv; -+ unsigned long pages; -+ -+ priv = file->private_data; -+ pages = priv->regs_phys >> PAGE_SHIFT; -+ /* -+ * The address decode is far larger than the actual number of registers. -+ * Just map the whole lot in. -+ */ -+ vma->vm_page_prot = phys_mem_access_prot(file, pages, -+ priv->mem_window_len, -+ vma->vm_page_prot); -+ vma->vm_ops = &argon_mem_vm_ops; -+ if (remap_pfn_range(vma, vma->vm_start, -+ pages, -+ priv->mem_window_len, -+ vma->vm_page_prot)) { -+ return -EAGAIN; -+ } -+ return 0; -+} -+ -+static const struct file_operations -+argon_mem_fops = { -+ .owner = THIS_MODULE, -+ .open = argon_mem_open, -+ .release = argon_mem_release, -+ .mmap = argon_mem_mmap, -+}; -+ -+static const struct of_device_id argon_mem_of_match[]; -+static int argon_mem_probe(struct platform_device *pdev) -+{ -+ int err; -+ void *ptr_err; -+ const struct of_device_id *id; -+ struct device *dev = &pdev->dev; -+ struct device *argon_mem_dev; -+ struct resource *ioresource; -+ struct argon_mem_priv *priv; -+ -+ -+ /* Allocate buffers and instance data */ -+ -+ priv = kzalloc(sizeof(struct argon_mem_priv), GFP_KERNEL); -+ -+ if (!priv) { -+ err = -ENOMEM; -+ goto failed_inst_alloc; -+ } -+ platform_set_drvdata(pdev, priv); -+ -+ priv->dev = dev; -+ id = of_match_device(argon_mem_of_match, dev); -+ if (!id) -+ return -EINVAL; -+ priv->name = id->data; -+ -+ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (ioresource) { -+ priv->regs_phys = ioresource->start; -+ priv->mem_window_len = ioresource->end - ioresource->start; -+ } else { -+ dev_err(priv->dev, "failed to get IO resource"); -+ err = -ENOENT; -+ goto failed_get_resource; -+ } -+ -+ /* Create character device entries */ -+ -+ err = alloc_chrdev_region(&priv->devid, -+ DEVICE_MINOR, 1, priv->name); -+ if (err != 0) { -+ dev_err(priv->dev, "unable to allocate device number"); -+ goto failed_alloc_chrdev; -+ } -+ cdev_init(&priv->argon_mem_cdev, &argon_mem_fops); -+ priv->argon_mem_cdev.owner = THIS_MODULE; -+ err = cdev_add(&priv->argon_mem_cdev, priv->devid, 1); -+ if (err != 0) { -+ dev_err(priv->dev, "unable to register device"); -+ goto failed_cdev_add; -+ } -+ -+ /* Create sysfs entries */ -+ -+ priv->class = class_create(THIS_MODULE, priv->name); -+ ptr_err = priv->class; -+ if (IS_ERR(ptr_err)) -+ goto failed_class_create; -+ -+ argon_mem_dev = device_create(priv->class, NULL, -+ priv->devid, NULL, -+ priv->name); -+ ptr_err = argon_mem_dev; -+ if (IS_ERR(ptr_err)) -+ goto failed_device_create; -+ -+ dev_info(priv->dev, "%s initialised: Registers at 0x%08lx length 0x%08lx", -+ priv->name, priv->regs_phys, priv->mem_window_len); -+ -+ return 0; -+ -+failed_device_create: -+ class_destroy(priv->class); -+failed_class_create: -+ cdev_del(&priv->argon_mem_cdev); -+ err = PTR_ERR(ptr_err); -+failed_cdev_add: -+ unregister_chrdev_region(priv->devid, 1); -+failed_alloc_chrdev: -+failed_get_resource: -+ kfree(priv); -+failed_inst_alloc: -+ dev_err(priv->dev, "could not load argon_mem"); -+ return err; -+} -+ -+static int argon_mem_remove(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct argon_mem_priv *priv = platform_get_drvdata(pdev); -+ -+ device_destroy(priv->class, priv->devid); -+ class_destroy(priv->class); -+ cdev_del(&priv->argon_mem_cdev); -+ unregister_chrdev_region(priv->devid, 1); -+ kfree(priv); -+ -+ dev_info(dev, "%s driver removed - OK", priv->name); -+ return 0; -+} -+ -+static const char argon_hevc_name[] = "argon-hevcmem"; -+static const char argon_h264_name[] = "argon-h264mem"; -+static const char argon_vp9_name[] = "argon-vp9mem"; -+static const char argon_intc_name[] = "argon-intcmem"; -+ -+static const struct of_device_id argon_mem_of_match[] = { -+ { -+ .compatible = "raspberrypi,argon-hevc-decoder", -+ .data = &argon_hevc_name, -+ }, -+ { -+ .compatible = "raspberrypi,argon-h264-decoder", -+ .data = &argon_h264_name, -+ }, -+ { -+ .compatible = "raspberrypi,argon-vp9-decoder", -+ .data = &argon_vp9_name, -+ }, -+ /* The "intc" is included as this block of hardware contains the -+ * "frame done" status flags. -+ */ -+ { -+ .compatible = "raspberrypi,argon-local-intc", -+ .data = &argon_intc_name, -+ }, -+ { /* sentinel */ }, -+}; -+ -+MODULE_DEVICE_TABLE(of, argon_mem_of_match); -+ -+static struct platform_driver argon_mem_driver = { -+ .probe = argon_mem_probe, -+ .remove = argon_mem_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = argon_mem_of_match, -+ }, -+}; -+ -+module_platform_driver(argon_mem_driver); -+ -+MODULE_ALIAS("platform:argon-mem"); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Driver for accessing Argon decoder registers from userspace"); -+MODULE_AUTHOR("Jonathan Bell "); diff --git a/target/linux/brcm2708/patches-4.19/950-0551-drm-vc4-Query-the-display-ID-for-each-display-in-FKM.patch b/target/linux/brcm2708/patches-4.19/950-0551-drm-vc4-Query-the-display-ID-for-each-display-in-FKM.patch new file mode 100644 index 0000000000..1c349449c5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0551-drm-vc4-Query-the-display-ID-for-each-display-in-FKM.patch @@ -0,0 +1,58 @@ +From 13723c680a129d79a7872ee131c0201374ba62ce Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 9 Apr 2019 12:37:28 +0100 +Subject: [PATCH] drm: vc4: Query the display ID for each display in + FKMS + +Replace the hard coded list of display IDs for a mailbox call +that returns the display ID for each display that has been +detected. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 16 +++++++++++++--- + include/soc/bcm2835/raspberrypi-firmware.h | 1 + + 2 files changed, 14 insertions(+), 3 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -943,7 +943,7 @@ static int vc4_fkms_bind(struct device * + struct vc4_crtc **crtc_list; + u32 num_displays, display_num; + int ret; +- const u32 display_num_lookup[] = {2, 7, 1}; ++ u32 display_id; + + vc4->firmware_kms = true; + +@@ -982,8 +982,18 @@ static int vc4_fkms_bind(struct device * + return -ENOMEM; + + for (display_num = 0; display_num < num_displays; display_num++) { +- ret = vc4_fkms_create_screen(dev, drm, display_num, +- display_num_lookup[display_num], ++ display_id = display_num; ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID, ++ &display_id, sizeof(display_id)); ++ /* FIXME: Determine the correct error handling here. ++ * Should we fail to create the one "screen" but keep the ++ * others, or fail the whole thing? ++ */ ++ if (ret) ++ DRM_ERROR("Failed to get display id %u\n", display_num); ++ ++ ret = vc4_fkms_create_screen(dev, drm, display_num, display_id, + &crtc_list[display_num]); + if (ret) + DRM_ERROR("Oh dear, failed to create display %u\n", +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -117,6 +117,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, + RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, + RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016, + RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013, + RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013, + RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014, diff --git a/target/linux/brcm2708/patches-4.19/950-0552-clk-bcm2835-Don-t-wait-for-pllh-lock.patch b/target/linux/brcm2708/patches-4.19/950-0552-clk-bcm2835-Don-t-wait-for-pllh-lock.patch deleted file mode 100644 index ef5d5dfacf..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0552-clk-bcm2835-Don-t-wait-for-pllh-lock.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 3924edc9bd3c55d48c383c1046d75e163ce3cddb Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 23 Jan 2019 16:11:50 +0000 -Subject: [PATCH 552/806] clk-bcm2835: Don't wait for pllh lock - -Signed-off-by: Phil Elwell ---- - drivers/clk/bcm/clk-bcm2835.c | 18 ++++++++++-------- - 1 file changed, 10 insertions(+), 8 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -627,15 +627,17 @@ static int bcm2835_pll_on(struct clk_hw - spin_unlock(&cprman->regs_lock); - - /* Wait for the PLL to lock. */ -- timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); -- while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) { -- if (ktime_after(ktime_get(), timeout)) { -- dev_err(cprman->dev, "%s: couldn't lock PLL\n", -- clk_hw_get_name(hw)); -- return -ETIMEDOUT; -- } -+ if (strcmp(data->name, "pllh")) { -+ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); -+ while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) { -+ if (ktime_after(ktime_get(), timeout)) { -+ dev_err(cprman->dev, "%s: couldn't lock PLL\n", -+ clk_hw_get_name(hw)); -+ return -ETIMEDOUT; -+ } - -- cpu_relax(); -+ cpu_relax(); -+ } - } - - cprman_write(cprman, data->a2w_ctrl_reg, diff --git a/target/linux/brcm2708/patches-4.19/950-0552-drm-vc4-Set-the-display-number-when-querying-the-dis.patch b/target/linux/brcm2708/patches-4.19/950-0552-drm-vc4-Set-the-display-number-when-querying-the-dis.patch new file mode 100644 index 0000000000..236caaf32f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0552-drm-vc4-Set-the-display-number-when-querying-the-dis.patch @@ -0,0 +1,103 @@ +From 1b9eb8d557c692e5f1dd831b5e7134e6d07a4dd4 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 9 Apr 2019 14:00:07 +0100 +Subject: [PATCH] drm/vc4: Set the display number when querying the + display resolution + +Without this the two displays got set to the same resolution. +(Requires a firmware bug fix to work). + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 37 +++++++++++++++++++------- + 1 file changed, 27 insertions(+), 10 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -75,6 +75,13 @@ struct mailbox_blank_display { + u32 blank; + }; + ++struct mailbox_get_width_height { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 display; ++ struct rpi_firmware_property_tag_header tag2; ++ u32 wh[2]; ++}; ++ + static const struct vc_image_format { + u32 drm; /* DRM_FORMAT_* */ + u32 vc_image; /* VC_IMAGE_* */ +@@ -192,6 +199,7 @@ struct vc4_fkms_connector { + * hook. + */ + struct drm_encoder *encoder; ++ u32 display_idx; + }; + + static inline struct vc4_fkms_connector * +@@ -723,21 +731,27 @@ vc4_fkms_connector_detect(struct drm_con + static int vc4_fkms_connector_get_modes(struct drm_connector *connector) + { + struct drm_device *dev = connector->dev; ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); + struct vc4_dev *vc4 = to_vc4_dev(dev); +- u32 wh[2] = {0, 0}; +- int ret; + struct drm_display_mode *mode; ++ struct mailbox_get_width_height wh = { ++ .tag1 = {RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, 4, 0, }, ++ .display = fkms_connector->display_idx, ++ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, ++ 8, 0, }, ++ }; ++ int ret; ++ ++ ret = rpi_firmware_property_list(vc4->firmware, &wh, sizeof(wh)); + +- ret = rpi_firmware_property(vc4->firmware, +- RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, +- &wh, sizeof(wh)); + if (ret) { + DRM_ERROR("Failed to get screen size: %d (0x%08x 0x%08x)\n", +- ret, wh[0], wh[1]); ++ ret, wh.wh[0], wh.wh[1]); + return 0; + } + +- mode = drm_cvt_mode(dev, wh[0], wh[1], 60 /* vrefresh */, ++ mode = drm_cvt_mode(dev, wh.wh[0], wh.wh[1], 60 /* vrefresh */, + 0, 0, false); + drm_mode_probed_add(connector, mode); + +@@ -772,8 +786,9 @@ static const struct drm_connector_helper + .best_encoder = vc4_fkms_connector_best_encoder, + }; + +-static struct drm_connector *vc4_fkms_connector_init(struct drm_device *dev, +- struct drm_encoder *encoder) ++static struct drm_connector * ++vc4_fkms_connector_init(struct drm_device *dev, struct drm_encoder *encoder, ++ u32 display_idx) + { + struct drm_connector *connector = NULL; + struct vc4_fkms_connector *fkms_connector; +@@ -788,6 +803,7 @@ static struct drm_connector *vc4_fkms_co + connector = &fkms_connector->base; + + fkms_connector->encoder = encoder; ++ fkms_connector->display_idx = display_idx; + + drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, + DRM_MODE_CONNECTOR_HDMIA); +@@ -904,7 +920,8 @@ static int vc4_fkms_create_screen(struct + drm_encoder_helper_add(&vc4_encoder->base, + &vc4_fkms_encoder_helper_funcs); + +- vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base); ++ vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base, ++ display_idx); + if (IS_ERR(vc4_crtc->connector)) { + ret = PTR_ERR(vc4_crtc->connector); + goto err_destroy_encoder; diff --git a/target/linux/brcm2708/patches-4.19/950-0553-bcm2835-pm-Move-bcm2835-watchdog-s-DT-probe-to-an-MF.patch b/target/linux/brcm2708/patches-4.19/950-0553-bcm2835-pm-Move-bcm2835-watchdog-s-DT-probe-to-an-MF.patch deleted file mode 100644 index de360d28cd..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0553-bcm2835-pm-Move-bcm2835-watchdog-s-DT-probe-to-an-MF.patch +++ /dev/null @@ -1,200 +0,0 @@ -From 90964ab2d00546a59086ffd08964da3d2a5cefc9 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 12 Dec 2018 15:51:47 -0800 -Subject: [PATCH 553/806] bcm2835-pm: Move bcm2835-watchdog's DT probe to an - MFD. - -The PM block that the wdt driver was binding to actually has multiple -features we want to expose (power domains, reset, watchdog). Move the -DT attachment to a MFD driver and make WDT probe against MFD. - -Signed-off-by: Eric Anholt -Reviewed-by: Guenter Roeck -Acked-by: Stefan Wahren -Signed-off-by: Stefan Wahren -(cherry picked from commit 5e6acc3e678ed3db746ab4fb53a980861cd711b6) ---- - drivers/mfd/Makefile | 1 + - drivers/mfd/bcm2835-pm.c | 64 ++++++++++++++++++++++++++++++++++ - drivers/watchdog/bcm2835_wdt.c | 26 +++++--------- - include/linux/mfd/bcm2835-pm.h | 13 +++++++ - 4 files changed, 87 insertions(+), 17 deletions(-) - create mode 100644 drivers/mfd/bcm2835-pm.c - create mode 100644 include/linux/mfd/bcm2835-pm.h - ---- a/drivers/mfd/Makefile -+++ b/drivers/mfd/Makefile -@@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_88PM805) += 88pm805.o 8 - obj-$(CONFIG_MFD_ACT8945A) += act8945a.o - obj-$(CONFIG_MFD_SM501) += sm501.o - obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o -+obj-$(CONFIG_ARCH_BCM2835) += bcm2835-pm.o - obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o - obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o - cros_ec_core-objs := cros_ec.o ---- /dev/null -+++ b/drivers/mfd/bcm2835-pm.c -@@ -0,0 +1,64 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * PM MFD driver for Broadcom BCM2835 -+ * -+ * This driver binds to the PM block and creates the MFD device for -+ * the WDT driver. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static const struct mfd_cell bcm2835_pm_devs[] = { -+ { .name = "bcm2835-wdt" }, -+}; -+ -+static int bcm2835_pm_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ struct device *dev = &pdev->dev; -+ struct bcm2835_pm *pm; -+ -+ pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL); -+ if (!pm) -+ return -ENOMEM; -+ platform_set_drvdata(pdev, pm); -+ -+ pm->dev = dev; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ pm->base = devm_ioremap_resource(dev, res); -+ if (IS_ERR(pm->base)) -+ return PTR_ERR(pm->base); -+ -+ return devm_mfd_add_devices(dev, -1, -+ bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs), -+ NULL, 0, NULL); -+} -+ -+static const struct of_device_id bcm2835_pm_of_match[] = { -+ { .compatible = "brcm,bcm2835-pm-wdt", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match); -+ -+static struct platform_driver bcm2835_pm_driver = { -+ .probe = bcm2835_pm_probe, -+ .driver = { -+ .name = "bcm2835-pm", -+ .of_match_table = bcm2835_pm_of_match, -+ }, -+}; -+module_platform_driver(bcm2835_pm_driver); -+ -+MODULE_AUTHOR("Eric Anholt "); -+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM MFD"); -+MODULE_LICENSE("GPL"); ---- a/drivers/watchdog/bcm2835_wdt.c -+++ b/drivers/watchdog/bcm2835_wdt.c -@@ -12,6 +12,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -41,6 +42,8 @@ struct bcm2835_wdt { - spinlock_t lock; - }; - -+static struct bcm2835_wdt *bcm2835_power_off_wdt; -+ - static unsigned int heartbeat; - static bool nowayout = WATCHDOG_NOWAYOUT; - -@@ -163,10 +166,7 @@ static struct watchdog_device bcm2835_wd - */ - static void bcm2835_power_off(void) - { -- struct device_node *np = -- of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt"); -- struct platform_device *pdev = of_find_device_by_node(np); -- struct bcm2835_wdt *wdt = platform_get_drvdata(pdev); -+ struct bcm2835_wdt *wdt = bcm2835_power_off_wdt; - - /* Partition 63 tells the firmware that this is a halt */ - __bcm2835_restart(wdt, 63); -@@ -174,7 +174,7 @@ static void bcm2835_power_off(void) - - static int bcm2835_wdt_probe(struct platform_device *pdev) - { -- struct resource *res; -+ struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent); - struct device *dev = &pdev->dev; - struct bcm2835_wdt *wdt; - int err; -@@ -186,10 +186,7 @@ static int bcm2835_wdt_probe(struct plat - - spin_lock_init(&wdt->lock); - -- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- wdt->base = devm_ioremap_resource(dev, res); -- if (IS_ERR(wdt->base)) -- return PTR_ERR(wdt->base); -+ wdt->base = pm->base; - - watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt); - watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev); -@@ -216,8 +213,10 @@ static int bcm2835_wdt_probe(struct plat - return err; - } - -- if (pm_power_off == NULL) -+ if (pm_power_off == NULL) { - pm_power_off = bcm2835_power_off; -+ bcm2835_power_off_wdt = wdt; -+ } - - dev_info(dev, "Broadcom BCM2835 watchdog timer"); - return 0; -@@ -231,18 +230,11 @@ static int bcm2835_wdt_remove(struct pla - return 0; - } - --static const struct of_device_id bcm2835_wdt_of_match[] = { -- { .compatible = "brcm,bcm2835-pm-wdt", }, -- {}, --}; --MODULE_DEVICE_TABLE(of, bcm2835_wdt_of_match); -- - static struct platform_driver bcm2835_wdt_driver = { - .probe = bcm2835_wdt_probe, - .remove = bcm2835_wdt_remove, - .driver = { - .name = "bcm2835-wdt", -- .of_match_table = bcm2835_wdt_of_match, - }, - }; - module_platform_driver(bcm2835_wdt_driver); ---- /dev/null -+++ b/include/linux/mfd/bcm2835-pm.h -@@ -0,0 +1,13 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+ -+#ifndef BCM2835_MFD_PM_H -+#define BCM2835_MFD_PM_H -+ -+#include -+ -+struct bcm2835_pm { -+ struct device *dev; -+ void __iomem *base; -+}; -+ -+#endif /* BCM2835_MFD_PM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0553-drm-vc4-Need-to-call-drm_crtc_vblank_-on-off-from-vc.patch b/target/linux/brcm2708/patches-4.19/950-0553-drm-vc4-Need-to-call-drm_crtc_vblank_-on-off-from-vc.patch new file mode 100644 index 0000000000..c9ce67fba5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0553-drm-vc4-Need-to-call-drm_crtc_vblank_-on-off-from-vc.patch @@ -0,0 +1,46 @@ +From fe2432615ecc3500cc265d6b84334950b9cbd4bf Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 9 Apr 2019 18:14:44 +0100 +Subject: [PATCH] from + vc4_crtc_[en|dis]able + +vblank needs to be enabled and disabled by the driver to avoid the +DRM framework complaining in the kernel log. + +vc4_fkms_disable_vblank needs to signal that we don't want vblank +callbacks too. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -562,6 +562,8 @@ static void vc4_crtc_mode_set_nofb(struc + + static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { ++ drm_crtc_vblank_off(crtc); ++ + /* Always turn the planes off on CRTC disable. In DRM, planes + * are enabled/disabled through the update/disable hooks + * above, and the CRTC enable/disable independently controls +@@ -577,6 +579,7 @@ static void vc4_crtc_disable(struct drm_ + + static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { ++ drm_crtc_vblank_on(crtc); + /* Unblank the planes (if they're supposed to be displayed). */ + + if (crtc->primary->state->fb) +@@ -673,6 +676,9 @@ static int vc4_fkms_enable_vblank(struct + + static void vc4_fkms_disable_vblank(struct drm_crtc *crtc) + { ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ ++ vc4_crtc->vblank_enabled = false; + } + + static const struct drm_crtc_funcs vc4_crtc_funcs = { diff --git a/target/linux/brcm2708/patches-4.19/950-0554-drm-vc4-Add-support-for-H-V-flips-on-each-plane-for-.patch b/target/linux/brcm2708/patches-4.19/950-0554-drm-vc4-Add-support-for-H-V-flips-on-each-plane-for-.patch new file mode 100644 index 0000000000..c3f48ecbde --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0554-drm-vc4-Add-support-for-H-V-flips-on-each-plane-for-.patch @@ -0,0 +1,86 @@ +From 129100bd38125bef5fe237ab867349dbe8b210ba Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 9 Apr 2019 17:19:51 +0100 +Subject: [PATCH] drm: vc4: Add support for H & V flips on each plane + for FKMS + +They are near zero cost options for the HVS, therefore they +may as well be implemented, and it allows us to invert the +DSI display. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 36 ++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -61,8 +61,21 @@ struct set_plane { + u8 padding; + + u32 planes[4]; /* DMA address of each plane */ ++ ++ u32 transform; + }; + ++/* Values for the transform field */ ++#define TRANSFORM_NO_ROTATE 0 ++#define TRANSFORM_ROTATE_180 BIT(1) ++#define TRANSFORM_FLIP_HRIZ BIT(16) ++#define TRANSFORM_FLIP_VERT BIT(17) ++ ++#define SUPPORTED_ROTATIONS (DRM_MODE_ROTATE_0 | \ ++ DRM_MODE_ROTATE_180 | \ ++ DRM_MODE_REFLECT_X | \ ++ DRM_MODE_REFLECT_Y) ++ + struct mailbox_set_plane { + struct rpi_firmware_property_tag_header tag; + struct set_plane plane; +@@ -274,6 +287,7 @@ static void vc4_plane_atomic_update(stru + struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); + int num_planes = fb->format->num_planes; + struct drm_display_mode *mode = &state->crtc->mode; ++ unsigned int rotation = SUPPORTED_ROTATIONS; + + mb->plane.vc_image_type = vc_fmt->vc_image; + mb->plane.width = fb->width; +@@ -294,6 +308,24 @@ static void vc4_plane_atomic_update(stru + mb->plane.is_vu = vc_fmt->is_vu; + mb->plane.planes[0] = bo->paddr + fb->offsets[0]; + ++ rotation = drm_rotation_simplify(state->rotation, rotation); ++ ++ switch (rotation) { ++ default: ++ case DRM_MODE_ROTATE_0: ++ mb->plane.transform = TRANSFORM_NO_ROTATE; ++ break; ++ case DRM_MODE_ROTATE_180: ++ mb->plane.transform = TRANSFORM_ROTATE_180; ++ break; ++ case DRM_MODE_REFLECT_X: ++ mb->plane.transform = TRANSFORM_FLIP_HRIZ; ++ break; ++ case DRM_MODE_REFLECT_Y: ++ mb->plane.transform = TRANSFORM_FLIP_VERT; ++ break; ++ } ++ + /* FIXME: If the dest rect goes off screen then clip the src rect so we + * don't have off-screen pixels. + */ +@@ -514,9 +546,13 @@ static struct drm_plane *vc4_fkms_plane_ + formats, num_formats, modifiers, + type, NULL); + ++ /* FIXME: Do we need to be checking return values from all these calls? ++ */ + drm_plane_helper_add(plane, &vc4_plane_helper_funcs); + + drm_plane_create_alpha_property(plane); ++ drm_plane_create_rotation_property(plane, DRM_MODE_ROTATE_0, ++ SUPPORTED_ROTATIONS); + + /* + * Default frame buffer setup is with FB on -127, and raspistill etc diff --git a/target/linux/brcm2708/patches-4.19/950-0554-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch b/target/linux/brcm2708/patches-4.19/950-0554-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch deleted file mode 100644 index 2c046a75c1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0554-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch +++ /dev/null @@ -1,825 +0,0 @@ -From fd8ca458728baabe9cae37836088a33c8642d420 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 12 Dec 2018 15:51:48 -0800 -Subject: [PATCH 554/806] soc: bcm: bcm2835-pm: Add support for power domains - under a new binding. - -This provides a free software alternative to raspberrypi-power.c's -firmware calls to manage power domains. It also exposes a reset line, -where previously the vc4 driver had to try to force power off the -domain in order to trigger a reset. - -Signed-off-by: Eric Anholt -Acked-by: Rob Herring -Acked-by: Stefan Wahren -Signed-off-by: Stefan Wahren -(cherry picked from commit 670c672608a1ffcbc7ac0f872734843593bb8b15) ---- - drivers/mfd/bcm2835-pm.c | 36 +- - drivers/soc/bcm/Kconfig | 11 + - drivers/soc/bcm/Makefile | 1 + - drivers/soc/bcm/bcm2835-power.c | 661 +++++++++++++++++++++++++++ - include/dt-bindings/soc/bcm2835-pm.h | 28 ++ - include/linux/mfd/bcm2835-pm.h | 1 + - 6 files changed, 734 insertions(+), 4 deletions(-) - create mode 100644 drivers/soc/bcm/bcm2835-power.c - create mode 100644 include/dt-bindings/soc/bcm2835-pm.h - ---- a/drivers/mfd/bcm2835-pm.c -+++ b/drivers/mfd/bcm2835-pm.c -@@ -3,7 +3,7 @@ - * PM MFD driver for Broadcom BCM2835 - * - * This driver binds to the PM block and creates the MFD device for -- * the WDT driver. -+ * the WDT and power drivers. - */ - - #include -@@ -21,11 +21,16 @@ static const struct mfd_cell bcm2835_pm_ - { .name = "bcm2835-wdt" }, - }; - -+static const struct mfd_cell bcm2835_power_devs[] = { -+ { .name = "bcm2835-power" }, -+}; -+ - static int bcm2835_pm_probe(struct platform_device *pdev) - { - struct resource *res; - struct device *dev = &pdev->dev; - struct bcm2835_pm *pm; -+ int ret; - - pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL); - if (!pm) -@@ -39,13 +44,36 @@ static int bcm2835_pm_probe(struct platf - if (IS_ERR(pm->base)) - return PTR_ERR(pm->base); - -- return devm_mfd_add_devices(dev, -1, -- bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs), -- NULL, 0, NULL); -+ ret = devm_mfd_add_devices(dev, -1, -+ bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs), -+ NULL, 0, NULL); -+ if (ret) -+ return ret; -+ -+ /* We'll use the presence of the AXI ASB regs in the -+ * bcm2835-pm binding as the key for whether we can reference -+ * the full PM register range and support power domains. -+ */ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ if (res) { -+ pm->asb = devm_ioremap_resource(dev, res); -+ if (IS_ERR(pm->asb)) -+ return PTR_ERR(pm->asb); -+ -+ ret = devm_mfd_add_devices(dev, -1, -+ bcm2835_power_devs, -+ ARRAY_SIZE(bcm2835_power_devs), -+ NULL, 0, NULL); -+ if (ret) -+ return ret; -+ } -+ -+ return 0; - } - - static const struct of_device_id bcm2835_pm_of_match[] = { - { .compatible = "brcm,bcm2835-pm-wdt", }, -+ { .compatible = "brcm,bcm2835-pm", }, - {}, - }; - MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match); ---- a/drivers/soc/bcm/Kconfig -+++ b/drivers/soc/bcm/Kconfig -@@ -1,5 +1,16 @@ - menu "Broadcom SoC drivers" - -+config BCM2835_POWER -+ bool "BCM2835 power domain driver" -+ depends on ARCH_BCM2835 || (COMPILE_TEST && OF) -+ select PM_GENERIC_DOMAINS if PM -+ select RESET_CONTROLLER -+ help -+ This enables support for the BCM2835 power domains and reset -+ controller. Any usage of power domains by the Raspberry Pi -+ firmware means that Linux usage of the same power domain -+ must be accessed using the RASPBERRYPI_POWER driver -+ - config RASPBERRYPI_POWER - bool "Raspberry Pi power domain driver" - depends on ARCH_BCM2835 || (COMPILE_TEST && OF) ---- a/drivers/soc/bcm/Makefile -+++ b/drivers/soc/bcm/Makefile -@@ -1,2 +1,3 @@ -+obj-$(CONFIG_BCM2835_POWER) += bcm2835-power.o - obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o - obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ ---- /dev/null -+++ b/drivers/soc/bcm/bcm2835-power.c -@@ -0,0 +1,661 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Power domain driver for Broadcom BCM2835 -+ * -+ * Copyright (C) 2018 Broadcom -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define PM_GNRIC 0x00 -+#define PM_AUDIO 0x04 -+#define PM_STATUS 0x18 -+#define PM_RSTC 0x1c -+#define PM_RSTS 0x20 -+#define PM_WDOG 0x24 -+#define PM_PADS0 0x28 -+#define PM_PADS2 0x2c -+#define PM_PADS3 0x30 -+#define PM_PADS4 0x34 -+#define PM_PADS5 0x38 -+#define PM_PADS6 0x3c -+#define PM_CAM0 0x44 -+#define PM_CAM0_LDOHPEN BIT(2) -+#define PM_CAM0_LDOLPEN BIT(1) -+#define PM_CAM0_CTRLEN BIT(0) -+ -+#define PM_CAM1 0x48 -+#define PM_CAM1_LDOHPEN BIT(2) -+#define PM_CAM1_LDOLPEN BIT(1) -+#define PM_CAM1_CTRLEN BIT(0) -+ -+#define PM_CCP2TX 0x4c -+#define PM_CCP2TX_LDOEN BIT(1) -+#define PM_CCP2TX_CTRLEN BIT(0) -+ -+#define PM_DSI0 0x50 -+#define PM_DSI0_LDOHPEN BIT(2) -+#define PM_DSI0_LDOLPEN BIT(1) -+#define PM_DSI0_CTRLEN BIT(0) -+ -+#define PM_DSI1 0x54 -+#define PM_DSI1_LDOHPEN BIT(2) -+#define PM_DSI1_LDOLPEN BIT(1) -+#define PM_DSI1_CTRLEN BIT(0) -+ -+#define PM_HDMI 0x58 -+#define PM_HDMI_RSTDR BIT(19) -+#define PM_HDMI_LDOPD BIT(1) -+#define PM_HDMI_CTRLEN BIT(0) -+ -+#define PM_USB 0x5c -+/* The power gates must be enabled with this bit before enabling the LDO in the -+ * USB block. -+ */ -+#define PM_USB_CTRLEN BIT(0) -+ -+#define PM_PXLDO 0x60 -+#define PM_PXBG 0x64 -+#define PM_DFT 0x68 -+#define PM_SMPS 0x6c -+#define PM_XOSC 0x70 -+#define PM_SPAREW 0x74 -+#define PM_SPARER 0x78 -+#define PM_AVS_RSTDR 0x7c -+#define PM_AVS_STAT 0x80 -+#define PM_AVS_EVENT 0x84 -+#define PM_AVS_INTEN 0x88 -+#define PM_DUMMY 0xfc -+ -+#define PM_IMAGE 0x108 -+#define PM_GRAFX 0x10c -+#define PM_PROC 0x110 -+#define PM_ENAB BIT(12) -+#define PM_ISPRSTN BIT(8) -+#define PM_H264RSTN BIT(7) -+#define PM_PERIRSTN BIT(6) -+#define PM_V3DRSTN BIT(6) -+#define PM_ISFUNC BIT(5) -+#define PM_MRDONE BIT(4) -+#define PM_MEMREP BIT(3) -+#define PM_ISPOW BIT(2) -+#define PM_POWOK BIT(1) -+#define PM_POWUP BIT(0) -+#define PM_INRUSH_SHIFT 13 -+#define PM_INRUSH_3_5_MA 0 -+#define PM_INRUSH_5_MA 1 -+#define PM_INRUSH_10_MA 2 -+#define PM_INRUSH_20_MA 3 -+#define PM_INRUSH_MASK (3 << PM_INRUSH_SHIFT) -+ -+#define PM_PASSWORD 0x5a000000 -+ -+#define PM_WDOG_TIME_SET 0x000fffff -+#define PM_RSTC_WRCFG_CLR 0xffffffcf -+#define PM_RSTS_HADWRH_SET 0x00000040 -+#define PM_RSTC_WRCFG_SET 0x00000030 -+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 -+#define PM_RSTC_RESET 0x00000102 -+ -+#define PM_READ(reg) readl(power->base + (reg)) -+#define PM_WRITE(reg, val) writel(PM_PASSWORD | (val), power->base + (reg)) -+ -+#define ASB_BRDG_VERSION 0x00 -+#define ASB_CPR_CTRL 0x04 -+ -+#define ASB_V3D_S_CTRL 0x08 -+#define ASB_V3D_M_CTRL 0x0c -+#define ASB_ISP_S_CTRL 0x10 -+#define ASB_ISP_M_CTRL 0x14 -+#define ASB_H264_S_CTRL 0x18 -+#define ASB_H264_M_CTRL 0x1c -+ -+#define ASB_REQ_STOP BIT(0) -+#define ASB_ACK BIT(1) -+#define ASB_EMPTY BIT(2) -+#define ASB_FULL BIT(3) -+ -+#define ASB_AXI_BRDG_ID 0x20 -+ -+#define ASB_READ(reg) readl(power->asb + (reg)) -+#define ASB_WRITE(reg, val) writel(PM_PASSWORD | (val), power->asb + (reg)) -+ -+struct bcm2835_power_domain { -+ struct generic_pm_domain base; -+ struct bcm2835_power *power; -+ u32 domain; -+ struct clk *clk; -+}; -+ -+struct bcm2835_power { -+ struct device *dev; -+ /* PM registers. */ -+ void __iomem *base; -+ /* AXI Async bridge registers. */ -+ void __iomem *asb; -+ -+ struct genpd_onecell_data pd_xlate; -+ struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT]; -+ struct reset_controller_dev reset; -+}; -+ -+static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg) -+{ -+ u64 start = ktime_get_ns(); -+ -+ /* Enable the module's async AXI bridges. */ -+ ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP); -+ while (ASB_READ(reg) & ASB_ACK) { -+ cpu_relax(); -+ if (ktime_get_ns() - start >= 1000) -+ return -ETIMEDOUT; -+ } -+ -+ return 0; -+} -+ -+static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg) -+{ -+ u64 start = ktime_get_ns(); -+ -+ /* Enable the module's async AXI bridges. */ -+ ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP); -+ while (!(ASB_READ(reg) & ASB_ACK)) { -+ cpu_relax(); -+ if (ktime_get_ns() - start >= 1000) -+ return -ETIMEDOUT; -+ } -+ -+ return 0; -+} -+ -+static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg) -+{ -+ struct bcm2835_power *power = pd->power; -+ -+ /* Enable functional isolation */ -+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC); -+ -+ /* Enable electrical isolation */ -+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW); -+ -+ /* Open the power switches. */ -+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_POWUP); -+ -+ return 0; -+} -+ -+static int bcm2835_power_power_on(struct bcm2835_power_domain *pd, u32 pm_reg) -+{ -+ struct bcm2835_power *power = pd->power; -+ struct device *dev = power->dev; -+ u64 start; -+ int ret; -+ int inrush; -+ bool powok; -+ -+ /* If it was already powered on by the fw, leave it that way. */ -+ if (PM_READ(pm_reg) & PM_POWUP) -+ return 0; -+ -+ /* Enable power. Allowing too much current at once may result -+ * in POWOK never getting set, so start low and ramp it up as -+ * necessary to succeed. -+ */ -+ powok = false; -+ for (inrush = PM_INRUSH_3_5_MA; inrush <= PM_INRUSH_20_MA; inrush++) { -+ PM_WRITE(pm_reg, -+ (PM_READ(pm_reg) & ~PM_INRUSH_MASK) | -+ (inrush << PM_INRUSH_SHIFT) | -+ PM_POWUP); -+ -+ start = ktime_get_ns(); -+ while (!(powok = !!(PM_READ(pm_reg) & PM_POWOK))) { -+ cpu_relax(); -+ if (ktime_get_ns() - start >= 3000) -+ break; -+ } -+ } -+ if (!powok) { -+ dev_err(dev, "Timeout waiting for %s power OK\n", -+ pd->base.name); -+ ret = -ETIMEDOUT; -+ goto err_disable_powup; -+ } -+ -+ /* Disable electrical isolation */ -+ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISPOW); -+ -+ /* Repair memory */ -+ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_MEMREP); -+ start = ktime_get_ns(); -+ while (!(PM_READ(pm_reg) & PM_MRDONE)) { -+ cpu_relax(); -+ if (ktime_get_ns() - start >= 1000) { -+ dev_err(dev, "Timeout waiting for %s memory repair\n", -+ pd->base.name); -+ ret = -ETIMEDOUT; -+ goto err_disable_ispow; -+ } -+ } -+ -+ /* Disable functional isolation */ -+ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISFUNC); -+ -+ return 0; -+ -+err_disable_ispow: -+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW); -+err_disable_powup: -+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~(PM_POWUP | PM_INRUSH_MASK)); -+ return ret; -+} -+ -+static int bcm2835_asb_power_on(struct bcm2835_power_domain *pd, -+ u32 pm_reg, -+ u32 asb_m_reg, -+ u32 asb_s_reg, -+ u32 reset_flags) -+{ -+ struct bcm2835_power *power = pd->power; -+ int ret; -+ -+ ret = clk_prepare_enable(pd->clk); -+ if (ret) { -+ dev_err(power->dev, "Failed to enable clock for %s\n", -+ pd->base.name); -+ return ret; -+ } -+ -+ /* Wait 32 clocks for reset to propagate, 1 us will be enough */ -+ udelay(1); -+ -+ clk_disable_unprepare(pd->clk); -+ -+ /* Deassert the resets. */ -+ PM_WRITE(pm_reg, PM_READ(pm_reg) | reset_flags); -+ -+ ret = clk_prepare_enable(pd->clk); -+ if (ret) { -+ dev_err(power->dev, "Failed to enable clock for %s\n", -+ pd->base.name); -+ goto err_enable_resets; -+ } -+ -+ ret = bcm2835_asb_enable(power, asb_m_reg); -+ if (ret) { -+ dev_err(power->dev, "Failed to enable ASB master for %s\n", -+ pd->base.name); -+ goto err_disable_clk; -+ } -+ ret = bcm2835_asb_enable(power, asb_s_reg); -+ if (ret) { -+ dev_err(power->dev, "Failed to enable ASB slave for %s\n", -+ pd->base.name); -+ goto err_disable_asb_master; -+ } -+ -+ return 0; -+ -+err_disable_asb_master: -+ bcm2835_asb_disable(power, asb_m_reg); -+err_disable_clk: -+ clk_disable_unprepare(pd->clk); -+err_enable_resets: -+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags); -+ return ret; -+} -+ -+static int bcm2835_asb_power_off(struct bcm2835_power_domain *pd, -+ u32 pm_reg, -+ u32 asb_m_reg, -+ u32 asb_s_reg, -+ u32 reset_flags) -+{ -+ struct bcm2835_power *power = pd->power; -+ int ret; -+ -+ ret = bcm2835_asb_disable(power, asb_s_reg); -+ if (ret) { -+ dev_warn(power->dev, "Failed to disable ASB slave for %s\n", -+ pd->base.name); -+ return ret; -+ } -+ ret = bcm2835_asb_disable(power, asb_m_reg); -+ if (ret) { -+ dev_warn(power->dev, "Failed to disable ASB master for %s\n", -+ pd->base.name); -+ bcm2835_asb_enable(power, asb_s_reg); -+ return ret; -+ } -+ -+ clk_disable_unprepare(pd->clk); -+ -+ /* Assert the resets. */ -+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags); -+ -+ return 0; -+} -+ -+static int bcm2835_power_pd_power_on(struct generic_pm_domain *domain) -+{ -+ struct bcm2835_power_domain *pd = -+ container_of(domain, struct bcm2835_power_domain, base); -+ struct bcm2835_power *power = pd->power; -+ -+ switch (pd->domain) { -+ case BCM2835_POWER_DOMAIN_GRAFX: -+ return bcm2835_power_power_on(pd, PM_GRAFX); -+ -+ case BCM2835_POWER_DOMAIN_GRAFX_V3D: -+ return bcm2835_asb_power_on(pd, PM_GRAFX, -+ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL, -+ PM_V3DRSTN); -+ -+ case BCM2835_POWER_DOMAIN_IMAGE: -+ return bcm2835_power_power_on(pd, PM_IMAGE); -+ -+ case BCM2835_POWER_DOMAIN_IMAGE_PERI: -+ return bcm2835_asb_power_on(pd, PM_IMAGE, -+ 0, 0, -+ PM_PERIRSTN); -+ -+ case BCM2835_POWER_DOMAIN_IMAGE_ISP: -+ return bcm2835_asb_power_on(pd, PM_IMAGE, -+ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL, -+ PM_ISPRSTN); -+ -+ case BCM2835_POWER_DOMAIN_IMAGE_H264: -+ return bcm2835_asb_power_on(pd, PM_IMAGE, -+ ASB_H264_M_CTRL, ASB_H264_S_CTRL, -+ PM_H264RSTN); -+ -+ case BCM2835_POWER_DOMAIN_USB: -+ PM_WRITE(PM_USB, PM_USB_CTRLEN); -+ return 0; -+ -+ case BCM2835_POWER_DOMAIN_DSI0: -+ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN); -+ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN | PM_DSI0_LDOHPEN); -+ return 0; -+ -+ case BCM2835_POWER_DOMAIN_DSI1: -+ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN); -+ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN | PM_DSI1_LDOHPEN); -+ return 0; -+ -+ case BCM2835_POWER_DOMAIN_CCP2TX: -+ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN); -+ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN | PM_CCP2TX_LDOEN); -+ return 0; -+ -+ case BCM2835_POWER_DOMAIN_HDMI: -+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_RSTDR); -+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_CTRLEN); -+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_LDOPD); -+ usleep_range(100, 200); -+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_RSTDR); -+ return 0; -+ -+ default: -+ dev_err(power->dev, "Invalid domain %d\n", pd->domain); -+ return -EINVAL; -+ } -+} -+ -+static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) -+{ -+ struct bcm2835_power_domain *pd = -+ container_of(domain, struct bcm2835_power_domain, base); -+ struct bcm2835_power *power = pd->power; -+ -+ switch (pd->domain) { -+ case BCM2835_POWER_DOMAIN_GRAFX: -+ return bcm2835_power_power_off(pd, PM_GRAFX); -+ -+ case BCM2835_POWER_DOMAIN_GRAFX_V3D: -+ return bcm2835_asb_power_off(pd, PM_GRAFX, -+ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL, -+ PM_V3DRSTN); -+ -+ case BCM2835_POWER_DOMAIN_IMAGE: -+ return bcm2835_power_power_off(pd, PM_IMAGE); -+ -+ case BCM2835_POWER_DOMAIN_IMAGE_PERI: -+ return bcm2835_asb_power_off(pd, PM_IMAGE, -+ 0, 0, -+ PM_PERIRSTN); -+ -+ case BCM2835_POWER_DOMAIN_IMAGE_ISP: -+ return bcm2835_asb_power_off(pd, PM_IMAGE, -+ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL, -+ PM_ISPRSTN); -+ -+ case BCM2835_POWER_DOMAIN_IMAGE_H264: -+ return bcm2835_asb_power_off(pd, PM_IMAGE, -+ ASB_H264_M_CTRL, ASB_H264_S_CTRL, -+ PM_H264RSTN); -+ -+ case BCM2835_POWER_DOMAIN_USB: -+ PM_WRITE(PM_USB, 0); -+ return 0; -+ -+ case BCM2835_POWER_DOMAIN_DSI0: -+ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN); -+ PM_WRITE(PM_DSI0, 0); -+ return 0; -+ -+ case BCM2835_POWER_DOMAIN_DSI1: -+ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN); -+ PM_WRITE(PM_DSI1, 0); -+ return 0; -+ -+ case BCM2835_POWER_DOMAIN_CCP2TX: -+ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN); -+ PM_WRITE(PM_CCP2TX, 0); -+ return 0; -+ -+ case BCM2835_POWER_DOMAIN_HDMI: -+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_LDOPD); -+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_CTRLEN); -+ return 0; -+ -+ default: -+ dev_err(power->dev, "Invalid domain %d\n", pd->domain); -+ return -EINVAL; -+ } -+} -+ -+static void -+bcm2835_init_power_domain(struct bcm2835_power *power, -+ int pd_xlate_index, const char *name) -+{ -+ struct device *dev = power->dev; -+ struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; -+ -+ dom->clk = devm_clk_get(dev->parent, name); -+ -+ dom->base.name = name; -+ dom->base.power_on = bcm2835_power_pd_power_on; -+ dom->base.power_off = bcm2835_power_pd_power_off; -+ -+ dom->domain = pd_xlate_index; -+ dom->power = power; -+ -+ /* XXX: on/off at boot? */ -+ pm_genpd_init(&dom->base, NULL, true); -+ -+ power->pd_xlate.domains[pd_xlate_index] = &dom->base; -+} -+ -+/** bcm2835_reset_reset - Resets a block that has a reset line in the -+ * PM block. -+ * -+ * The consumer of the reset controller must have the power domain up -+ * -- there's no reset ability with the power domain down. To reset -+ * the sub-block, we just disable its access to memory through the -+ * ASB, reset, and re-enable. -+ */ -+static int bcm2835_reset_reset(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power, -+ reset); -+ struct bcm2835_power_domain *pd; -+ int ret; -+ -+ switch (id) { -+ case BCM2835_RESET_V3D: -+ pd = &power->domains[BCM2835_POWER_DOMAIN_GRAFX_V3D]; -+ break; -+ case BCM2835_RESET_H264: -+ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_H264]; -+ break; -+ case BCM2835_RESET_ISP: -+ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_ISP]; -+ break; -+ default: -+ dev_err(power->dev, "Bad reset id %ld\n", id); -+ return -EINVAL; -+ } -+ -+ ret = bcm2835_power_pd_power_off(&pd->base); -+ if (ret) -+ return ret; -+ -+ return bcm2835_power_pd_power_on(&pd->base); -+} -+ -+static int bcm2835_reset_status(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power, -+ reset); -+ -+ switch (id) { -+ case BCM2835_RESET_V3D: -+ return !PM_READ(PM_GRAFX & PM_V3DRSTN); -+ case BCM2835_RESET_H264: -+ return !PM_READ(PM_IMAGE & PM_H264RSTN); -+ case BCM2835_RESET_ISP: -+ return !PM_READ(PM_IMAGE & PM_ISPRSTN); -+ default: -+ return -EINVAL; -+ } -+} -+ -+const struct reset_control_ops bcm2835_reset_ops = { -+ .reset = bcm2835_reset_reset, -+ .status = bcm2835_reset_status, -+}; -+ -+static const char *const power_domain_names[] = { -+ [BCM2835_POWER_DOMAIN_GRAFX] = "grafx", -+ [BCM2835_POWER_DOMAIN_GRAFX_V3D] = "v3d", -+ -+ [BCM2835_POWER_DOMAIN_IMAGE] = "image", -+ [BCM2835_POWER_DOMAIN_IMAGE_PERI] = "peri_image", -+ [BCM2835_POWER_DOMAIN_IMAGE_H264] = "h264", -+ [BCM2835_POWER_DOMAIN_IMAGE_ISP] = "isp", -+ -+ [BCM2835_POWER_DOMAIN_USB] = "usb", -+ [BCM2835_POWER_DOMAIN_DSI0] = "dsi0", -+ [BCM2835_POWER_DOMAIN_DSI1] = "dsi1", -+ [BCM2835_POWER_DOMAIN_CAM0] = "cam0", -+ [BCM2835_POWER_DOMAIN_CAM1] = "cam1", -+ [BCM2835_POWER_DOMAIN_CCP2TX] = "ccp2tx", -+ [BCM2835_POWER_DOMAIN_HDMI] = "hdmi", -+}; -+ -+static int bcm2835_power_probe(struct platform_device *pdev) -+{ -+ struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent); -+ struct device *dev = &pdev->dev; -+ struct bcm2835_power *power; -+ static const struct { -+ int parent, child; -+ } domain_deps[] = { -+ { BCM2835_POWER_DOMAIN_GRAFX, BCM2835_POWER_DOMAIN_GRAFX_V3D }, -+ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_PERI }, -+ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_H264 }, -+ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_ISP }, -+ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_USB }, -+ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 }, -+ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 }, -+ }; -+ int ret, i; -+ u32 id; -+ -+ power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL); -+ if (!power) -+ return -ENOMEM; -+ platform_set_drvdata(pdev, power); -+ -+ power->dev = dev; -+ power->base = pm->base; -+ power->asb = pm->asb; -+ -+ id = ASB_READ(ASB_AXI_BRDG_ID); -+ if (id != 0x62726467 /* "BRDG" */) { -+ dev_err(dev, "ASB register ID returned 0x%08x\n", id); -+ return -ENODEV; -+ } -+ -+ power->pd_xlate.domains = devm_kcalloc(dev, -+ ARRAY_SIZE(power_domain_names), -+ sizeof(*power->pd_xlate.domains), -+ GFP_KERNEL); -+ if (!power->pd_xlate.domains) -+ return -ENOMEM; -+ -+ power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names); -+ -+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) -+ bcm2835_init_power_domain(power, i, power_domain_names[i]); -+ -+ for (i = 0; i < ARRAY_SIZE(domain_deps); i++) { -+ pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base, -+ &power->domains[domain_deps[i].child].base); -+ } -+ -+ power->reset.owner = THIS_MODULE; -+ power->reset.nr_resets = BCM2835_RESET_COUNT; -+ power->reset.ops = &bcm2835_reset_ops; -+ power->reset.of_node = dev->parent->of_node; -+ -+ ret = devm_reset_controller_register(dev, &power->reset); -+ if (ret) -+ return ret; -+ -+ of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate); -+ -+ dev_info(dev, "Broadcom BCM2835 power domains driver"); -+ return 0; -+} -+ -+static int bcm2835_power_remove(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+static struct platform_driver bcm2835_power_driver = { -+ .probe = bcm2835_power_probe, -+ .remove = bcm2835_power_remove, -+ .driver = { -+ .name = "bcm2835-power", -+ }, -+}; -+module_platform_driver(bcm2835_power_driver); -+ -+MODULE_AUTHOR("Eric Anholt "); -+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM power domains and reset"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/include/dt-bindings/soc/bcm2835-pm.h -@@ -0,0 +1,28 @@ -+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -+ -+#ifndef _DT_BINDINGS_ARM_BCM2835_PM_H -+#define _DT_BINDINGS_ARM_BCM2835_PM_H -+ -+#define BCM2835_POWER_DOMAIN_GRAFX 0 -+#define BCM2835_POWER_DOMAIN_GRAFX_V3D 1 -+#define BCM2835_POWER_DOMAIN_IMAGE 2 -+#define BCM2835_POWER_DOMAIN_IMAGE_PERI 3 -+#define BCM2835_POWER_DOMAIN_IMAGE_ISP 4 -+#define BCM2835_POWER_DOMAIN_IMAGE_H264 5 -+#define BCM2835_POWER_DOMAIN_USB 6 -+#define BCM2835_POWER_DOMAIN_DSI0 7 -+#define BCM2835_POWER_DOMAIN_DSI1 8 -+#define BCM2835_POWER_DOMAIN_CAM0 9 -+#define BCM2835_POWER_DOMAIN_CAM1 10 -+#define BCM2835_POWER_DOMAIN_CCP2TX 11 -+#define BCM2835_POWER_DOMAIN_HDMI 12 -+ -+#define BCM2835_POWER_DOMAIN_COUNT 13 -+ -+#define BCM2835_RESET_V3D 0 -+#define BCM2835_RESET_ISP 1 -+#define BCM2835_RESET_H264 2 -+ -+#define BCM2835_RESET_COUNT 3 -+ -+#endif /* _DT_BINDINGS_ARM_BCM2835_PM_H */ ---- a/include/linux/mfd/bcm2835-pm.h -+++ b/include/linux/mfd/bcm2835-pm.h -@@ -8,6 +8,7 @@ - struct bcm2835_pm { - struct device *dev; - void __iomem *base; -+ void __iomem *asb; - }; - - #endif /* BCM2835_MFD_PM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0555-drm-vc4-Remove-unused-vc4_fkms_cancel_page_flip-func.patch b/target/linux/brcm2708/patches-4.19/950-0555-drm-vc4-Remove-unused-vc4_fkms_cancel_page_flip-func.patch new file mode 100644 index 0000000000..4b6cb39850 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0555-drm-vc4-Remove-unused-vc4_fkms_cancel_page_flip-func.patch @@ -0,0 +1,56 @@ +From 6885af169f6eeb386f410e556029c6518c6b67b2 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 10 Apr 2019 17:35:05 +0100 +Subject: [PATCH] drm: vc4: Remove unused vc4_fkms_cancel_page_flip + function + +"32a3dbe drm/vc4: Nuke preclose hook" removed vc4_cancel_page_flip, +but vc4_fkms_cancel_page_flip was still be added to with the +fkms driver, even though it was never called. +Nuke it too. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_drv.h | 1 - + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 20 -------------------- + 2 files changed, 21 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -724,7 +724,6 @@ extern const struct dma_fence_ops vc4_fe + + /* vc4_firmware_kms.c */ + extern struct platform_driver vc4_firmware_kms_driver; +-void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); + + /* vc4_gem.c */ + void vc4_gem_init(struct drm_device *dev); +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -739,26 +739,6 @@ static const struct drm_crtc_helper_func + .atomic_flush = vc4_crtc_atomic_flush, + }; + +-/* Frees the page flip event when the DRM device is closed with the +- * event still outstanding. +- */ +-void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) +-{ +- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); +- struct drm_device *dev = crtc->dev; +- unsigned long flags; +- +- spin_lock_irqsave(&dev->event_lock, flags); +- +- if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) { +- kfree(&vc4_crtc->event->base); +- drm_crtc_vblank_put(crtc); +- vc4_crtc->event = NULL; +- } +- +- spin_unlock_irqrestore(&dev->event_lock, flags); +-} +- + static const struct of_device_id vc4_firmware_kms_dt_match[] = { + { .compatible = "raspberrypi,rpi-firmware-kms" }, + {} diff --git a/target/linux/brcm2708/patches-4.19/950-0555-soc-bcm-bcm2835-pm-Fix-PM_IMAGE_PERI-power-domain-su.patch b/target/linux/brcm2708/patches-4.19/950-0555-soc-bcm-bcm2835-pm-Fix-PM_IMAGE_PERI-power-domain-su.patch deleted file mode 100644 index 5c6f027745..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0555-soc-bcm-bcm2835-pm-Fix-PM_IMAGE_PERI-power-domain-su.patch +++ /dev/null @@ -1,45 +0,0 @@ -From ea44a81b7daf511788aecaee7575feff359c5d19 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 11 Jan 2019 17:29:10 -0800 -Subject: [PATCH 555/806] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain - support. - -We don't have ASB master/slave regs for this domain, so just skip that -step. - -Signed-off-by: Eric Anholt -Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") ---- - drivers/soc/bcm/bcm2835-power.c | 14 ++++++++++++-- - 1 file changed, 12 insertions(+), 2 deletions(-) - ---- a/drivers/soc/bcm/bcm2835-power.c -+++ b/drivers/soc/bcm/bcm2835-power.c -@@ -150,7 +150,12 @@ struct bcm2835_power { - - static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg) - { -- u64 start = ktime_get_ns(); -+ u64 start; -+ -+ if (!reg) -+ return 0; -+ -+ start = ktime_get_ns(); - - /* Enable the module's async AXI bridges. */ - ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP); -@@ -165,7 +170,12 @@ static int bcm2835_asb_enable(struct bcm - - static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg) - { -- u64 start = ktime_get_ns(); -+ u64 start; -+ -+ if (!reg) -+ return 0; -+ -+ start = ktime_get_ns(); - - /* Enable the module's async AXI bridges. */ - ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP); diff --git a/target/linux/brcm2708/patches-4.19/950-0556-drm-vc4-Iterate-over-all-planes-in-vc4_crtc_-dis-en-.patch b/target/linux/brcm2708/patches-4.19/950-0556-drm-vc4-Iterate-over-all-planes-in-vc4_crtc_-dis-en-.patch new file mode 100644 index 0000000000..ca1b777b4b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0556-drm-vc4-Iterate-over-all-planes-in-vc4_crtc_-dis-en-.patch @@ -0,0 +1,57 @@ +From 501dabdd480e2da1b3b1395b5ebf9d5306fec689 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 10 Apr 2019 17:42:37 +0100 +Subject: [PATCH] drm: vc4: Iterate over all planes in + vc4_crtc_[dis|en]able + +Fixes a FIXME where the overlay plane wouldn't be restored. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 20 +++++++++++--------- + 1 file changed, 11 insertions(+), 9 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -598,6 +598,8 @@ static void vc4_crtc_mode_set_nofb(struc + + static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { ++ struct drm_plane *plane; ++ + drm_crtc_vblank_off(crtc); + + /* Always turn the planes off on CRTC disable. In DRM, planes +@@ -607,23 +609,23 @@ static void vc4_crtc_disable(struct drm_ + * give us a CRTC-level control for that. + */ + +- vc4_plane_atomic_disable(crtc->cursor, crtc->cursor->state); +- vc4_plane_atomic_disable(crtc->primary, crtc->primary->state); +- +- /* FIXME: Disable overlay planes */ ++ drm_atomic_crtc_for_each_plane(plane, crtc) ++ vc4_plane_atomic_disable(plane, plane->state); + } + + static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { ++ struct drm_plane *plane; ++ + drm_crtc_vblank_on(crtc); ++ + /* Unblank the planes (if they're supposed to be displayed). */ ++ drm_atomic_crtc_for_each_plane(plane, crtc) ++ if (plane->state->fb) ++ vc4_plane_set_blank(plane, plane->state->visible); ++} + +- if (crtc->primary->state->fb) +- vc4_plane_set_blank(crtc->primary, false); +- if (crtc->cursor->state->fb) +- vc4_plane_set_blank(crtc->cursor, crtc->cursor->state); + +- /* FIXME: Enable overlay planes */ + } + + static int vc4_crtc_atomic_check(struct drm_crtc *crtc, diff --git a/target/linux/brcm2708/patches-4.19/950-0556-soc-bcm-bcm2835-pm-Fix-error-paths-of-initialization.patch b/target/linux/brcm2708/patches-4.19/950-0556-soc-bcm-bcm2835-pm-Fix-error-paths-of-initialization.patch deleted file mode 100644 index d873ec6335..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0556-soc-bcm-bcm2835-pm-Fix-error-paths-of-initialization.patch +++ /dev/null @@ -1,103 +0,0 @@ -From 8d9f3526529d857376c661c21820a0049c2e62de Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Sat, 12 Jan 2019 08:07:43 -0800 -Subject: [PATCH 556/806] soc: bcm: bcm2835-pm: Fix error paths of - initialization. - -The clock driver may probe after ours and so we need to pass the --EPROBE_DEFER out. Fix the other error path while we're here. - -v2: Use dom->name instead of dom->gov as the flag for initialized - domains, since we aren't setting up a governor. Make sure to - clear ->clk when no clk is present in the DT. - -Signed-off-by: Eric Anholt -Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") ---- - drivers/soc/bcm/bcm2835-power.c | 35 ++++++++++++++++++++++++++++----- - 1 file changed, 30 insertions(+), 5 deletions(-) - ---- a/drivers/soc/bcm/bcm2835-power.c -+++ b/drivers/soc/bcm/bcm2835-power.c -@@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(st - } - } - --static void -+static int - bcm2835_init_power_domain(struct bcm2835_power *power, - int pd_xlate_index, const char *name) - { -@@ -493,6 +493,17 @@ bcm2835_init_power_domain(struct bcm2835 - struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; - - dom->clk = devm_clk_get(dev->parent, name); -+ if (IS_ERR(dom->clk)) { -+ int ret = PTR_ERR(dom->clk); -+ -+ if (ret == -EPROBE_DEFER) -+ return ret; -+ -+ /* Some domains don't have a clk, so make sure that we -+ * don't deref an error pointer later. -+ */ -+ dom->clk = NULL; -+ } - - dom->base.name = name; - dom->base.power_on = bcm2835_power_pd_power_on; -@@ -505,6 +516,8 @@ bcm2835_init_power_domain(struct bcm2835 - pm_genpd_init(&dom->base, NULL, true); - - power->pd_xlate.domains[pd_xlate_index] = &dom->base; -+ -+ return 0; - } - - /** bcm2835_reset_reset - Resets a block that has a reset line in the -@@ -602,7 +615,7 @@ static int bcm2835_power_probe(struct pl - { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 }, - { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 }, - }; -- int ret, i; -+ int ret = 0, i; - u32 id; - - power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL); -@@ -629,8 +642,11 @@ static int bcm2835_power_probe(struct pl - - power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names); - -- for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) -- bcm2835_init_power_domain(power, i, power_domain_names[i]); -+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { -+ ret = bcm2835_init_power_domain(power, i, power_domain_names[i]); -+ if (ret) -+ goto fail; -+ } - - for (i = 0; i < ARRAY_SIZE(domain_deps); i++) { - pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base, -@@ -644,12 +660,21 @@ static int bcm2835_power_probe(struct pl - - ret = devm_reset_controller_register(dev, &power->reset); - if (ret) -- return ret; -+ goto fail; - - of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate); - - dev_info(dev, "Broadcom BCM2835 power domains driver"); - return 0; -+ -+fail: -+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { -+ struct generic_pm_domain *dom = &power->domains[i].base; -+ -+ if (dom->name) -+ pm_genpd_remove(dom); -+ } -+ return ret; - } - - static int bcm2835_power_remove(struct platform_device *pdev) diff --git a/target/linux/brcm2708/patches-4.19/950-0557-drm-vc4-Bring-fkms-into-line-with-kms-in-blocking-do.patch b/target/linux/brcm2708/patches-4.19/950-0557-drm-vc4-Bring-fkms-into-line-with-kms-in-blocking-do.patch new file mode 100644 index 0000000000..af29bdab81 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0557-drm-vc4-Bring-fkms-into-line-with-kms-in-blocking-do.patch @@ -0,0 +1,47 @@ +From d4df2766945e0410d1975434f34e647e7e13b992 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 10 Apr 2019 17:43:57 +0100 +Subject: [PATCH] drm: vc4: Bring fkms into line with kms in blocking + doublescan modes + +Implement vc4_crtc_mode_valid so that it blocks doublescan modes + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +++++++++++++-- + 1 file changed, 13 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -625,7 +625,17 @@ static void vc4_crtc_enable(struct drm_c + vc4_plane_set_blank(plane, plane->state->visible); + } + ++static enum drm_mode_status ++vc4_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode) ++{ ++ /* Do not allow doublescan modes from user space */ ++ if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { ++ DRM_DEBUG_KMS("[CRTC:%d] Doublescan mode rejected.\n", ++ crtc->base.id); ++ return MODE_NO_DBLESCAN; ++ } + ++ return MODE_OK; + } + + static int vc4_crtc_atomic_check(struct drm_crtc *crtc, +@@ -735,10 +745,11 @@ static const struct drm_crtc_funcs vc4_c + + static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { + .mode_set_nofb = vc4_crtc_mode_set_nofb, +- .atomic_disable = vc4_crtc_disable, +- .atomic_enable = vc4_crtc_enable, ++ .mode_valid = vc4_crtc_mode_valid, + .atomic_check = vc4_crtc_atomic_check, + .atomic_flush = vc4_crtc_atomic_flush, ++ .atomic_enable = vc4_crtc_enable, ++ .atomic_disable = vc4_crtc_disable, + }; + + static const struct of_device_id vc4_firmware_kms_dt_match[] = { diff --git a/target/linux/brcm2708/patches-4.19/950-0557-soc-bcm-bcm2835-pm-Add-support-for-2711.patch b/target/linux/brcm2708/patches-4.19/950-0557-soc-bcm-bcm2835-pm-Add-support-for-2711.patch deleted file mode 100644 index 5f547fddfe..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0557-soc-bcm-bcm2835-pm-Add-support-for-2711.patch +++ /dev/null @@ -1,102 +0,0 @@ -From f3470769d4e64084fc7f3060d634aff8fdf8f75d Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 11 Jan 2019 17:31:07 -0800 -Subject: [PATCH 557/806] soc: bcm: bcm2835-pm: Add support for 2711. - -Without the actual power management part any more, there's a lot less -to set up for V3D. We just need to clear the RSTN field for the power -domain, and expose the reset controller for toggling it again. - -This is definitely incomplete -- the old ISP and H264 is in the old -bridge, but since we have no consumers of it I've just done the -minimum to get V3D working. - -Signed-off-by: Eric Anholt ---- - drivers/mfd/bcm2835-pm.c | 11 +++++++++++ - drivers/soc/bcm/bcm2835-power.c | 22 ++++++++++++++++++++++ - include/linux/mfd/bcm2835-pm.h | 1 + - 3 files changed, 34 insertions(+) - ---- a/drivers/mfd/bcm2835-pm.c -+++ b/drivers/mfd/bcm2835-pm.c -@@ -50,6 +50,17 @@ static int bcm2835_pm_probe(struct platf - if (ret) - return ret; - -+ /* Map the ARGON ASB regs if present. */ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2); -+ if (res) { -+ pm->arg_asb = devm_ioremap_resource(dev, res); -+ if (IS_ERR(pm->arg_asb)) { -+ dev_err(dev, "Failed to map ARGON ASB: %ld\n", -+ PTR_ERR(pm->arg_asb)); -+ return PTR_ERR(pm->arg_asb); -+ } -+ } -+ - /* We'll use the presence of the AXI ASB regs in the - * bcm2835-pm binding as the key for whether we can reference - * the full PM register range and support power domains. ---- a/drivers/soc/bcm/bcm2835-power.c -+++ b/drivers/soc/bcm/bcm2835-power.c -@@ -143,6 +143,8 @@ struct bcm2835_power { - /* AXI Async bridge registers. */ - void __iomem *asb; - -+ bool is_2711; -+ - struct genpd_onecell_data pd_xlate; - struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT]; - struct reset_controller_dev reset; -@@ -192,6 +194,10 @@ static int bcm2835_power_power_off(struc - { - struct bcm2835_power *power = pd->power; - -+ /* 2711 has no power domains above the reset controller. */ -+ if (power->is_2711) -+ return 0; -+ - /* Enable functional isolation */ - PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC); - -@@ -213,6 +219,10 @@ static int bcm2835_power_power_on(struct - int inrush; - bool powok; - -+ /* 2711 has no power domains above the reset controller. */ -+ if (power->is_2711) -+ return 0; -+ - /* If it was already powered on by the fw, leave it that way. */ - if (PM_READ(pm_reg) & PM_POWUP) - return 0; -@@ -627,6 +637,18 @@ static int bcm2835_power_probe(struct pl - power->base = pm->base; - power->asb = pm->asb; - -+ /* 2711 hack: the new ARGON ASB took over V3D, which is our -+ * only consumer of this driver so far. The old ASB seems to -+ * still be present with ISP and H264 bits but no V3D, but I -+ * don't know if that's real or not. The V3D is in the same -+ * place in the new ASB as the old one, so just poke the new -+ * one for now. -+ */ -+ if (pm->arg_asb) { -+ power->asb = pm->arg_asb; -+ power->is_2711 = true; -+ } -+ - id = ASB_READ(ASB_AXI_BRDG_ID); - if (id != 0x62726467 /* "BRDG" */) { - dev_err(dev, "ASB register ID returned 0x%08x\n", id); ---- a/include/linux/mfd/bcm2835-pm.h -+++ b/include/linux/mfd/bcm2835-pm.h -@@ -9,6 +9,7 @@ struct bcm2835_pm { - struct device *dev; - void __iomem *base; - void __iomem *asb; -+ void __iomem *arg_asb; - }; - - #endif /* BCM2835_MFD_PM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0558-drm-expand-drm_syncobj_find_fence-to-support-timelin.patch b/target/linux/brcm2708/patches-4.19/950-0558-drm-expand-drm_syncobj_find_fence-to-support-timelin.patch deleted file mode 100644 index 1dc154ba47..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0558-drm-expand-drm_syncobj_find_fence-to-support-timelin.patch +++ /dev/null @@ -1,104 +0,0 @@ -From 7e891cb1f9f57c87706b1292f186d65e1640e0e7 Mon Sep 17 00:00:00 2001 -From: Chunming Zhou -Date: Thu, 30 Aug 2018 14:48:29 +0800 -Subject: [PATCH 558/806] drm: expand drm_syncobj_find_fence to support - timeline point v2 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -we can fetch timeline point fence after expanded. -v2: The parameter fence is the result of the function and should come last. - -Signed-off-by: Chunming Zhou -Reviewed-by: Christian König -Signed-off-by: Christian König -Link: https://patchwork.freedesktop.org/patch/246541/ -(cherry picked from commit 0a6730ea27b68c7ac4171c29a816c29d26a9637a) -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- - drivers/gpu/drm/drm_syncobj.c | 5 +++-- - drivers/gpu/drm/v3d/v3d_gem.c | 4 ++-- - drivers/gpu/drm/vc4/vc4_gem.c | 2 +- - include/drm/drm_syncobj.h | 2 +- - 5 files changed, 8 insertions(+), 7 deletions(-) - ---- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c -+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c -@@ -1105,7 +1105,7 @@ static int amdgpu_syncobj_lookup_and_add - { - int r; - struct dma_fence *fence; -- r = drm_syncobj_find_fence(p->filp, handle, &fence); -+ r = drm_syncobj_find_fence(p->filp, handle, 0, &fence); - if (r) - return r; - ---- a/drivers/gpu/drm/drm_syncobj.c -+++ b/drivers/gpu/drm/drm_syncobj.c -@@ -235,6 +235,7 @@ static int drm_syncobj_assign_null_handl - * drm_syncobj_find_fence - lookup and reference the fence in a sync object - * @file_private: drm file private pointer - * @handle: sync object handle to lookup. -+ * @point: timeline point - * @fence: out parameter for the fence - * - * This is just a convenience function that combines drm_syncobj_find() and -@@ -245,7 +246,7 @@ static int drm_syncobj_assign_null_handl - * dma_fence_put(). - */ - int drm_syncobj_find_fence(struct drm_file *file_private, -- u32 handle, -+ u32 handle, u64 point, - struct dma_fence **fence) - { - struct drm_syncobj *syncobj = drm_syncobj_find(file_private, handle); -@@ -516,7 +517,7 @@ static int drm_syncobj_export_sync_file( - if (fd < 0) - return fd; - -- ret = drm_syncobj_find_fence(file_private, handle, &fence); -+ ret = drm_syncobj_find_fence(file_private, handle, 0, &fence); - if (ret) - goto err_put_fd; - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -521,12 +521,12 @@ v3d_submit_cl_ioctl(struct drm_device *d - kref_init(&exec->refcount); - - ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl, -- &exec->bin.in_fence); -+ 0, &exec->bin.in_fence); - if (ret == -EINVAL) - goto fail; - - ret = drm_syncobj_find_fence(file_priv, args->in_sync_rcl, -- &exec->render.in_fence); -+ 0, &exec->render.in_fence); - if (ret == -EINVAL) - goto fail; - ---- a/drivers/gpu/drm/vc4/vc4_gem.c -+++ b/drivers/gpu/drm/vc4/vc4_gem.c -@@ -1173,7 +1173,7 @@ vc4_submit_cl_ioctl(struct drm_device *d - - if (args->in_sync) { - ret = drm_syncobj_find_fence(file_priv, args->in_sync, -- &in_fence); -+ 0, &in_fence); - if (ret) - goto fail; - ---- a/include/drm/drm_syncobj.h -+++ b/include/drm/drm_syncobj.h -@@ -139,7 +139,7 @@ void drm_syncobj_remove_callback(struct - void drm_syncobj_replace_fence(struct drm_syncobj *syncobj, - struct dma_fence *fence); - int drm_syncobj_find_fence(struct drm_file *file_private, -- u32 handle, -+ u32 handle, u64 point, - struct dma_fence **fence); - void drm_syncobj_free(struct kref *kref); - int drm_syncobj_create(struct drm_syncobj **out_syncobj, uint32_t flags, diff --git a/target/linux/brcm2708/patches-4.19/950-0558-drm-vc4-Increase-max_width-height-to-7680.patch b/target/linux/brcm2708/patches-4.19/950-0558-drm-vc4-Increase-max_width-height-to-7680.patch new file mode 100644 index 0000000000..f2c97479ae --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0558-drm-vc4-Increase-max_width-height-to-7680.patch @@ -0,0 +1,27 @@ +From b4ed0c4f55542b642f16ee6376b69968d6bafc3b Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 29 Apr 2019 18:45:00 +0100 +Subject: [PATCH] drm: vc4: Increase max_width/height to 7680. + +There are some limits still being investigated that stop +us going up to 8192, but 7680 is sufficient for dual 4k +displays. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_kms.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -429,8 +429,8 @@ int vc4_kms_load(struct drm_device *dev) + return ret; + } + +- dev->mode_config.max_width = 4096; +- dev->mode_config.max_height = 4096; ++ dev->mode_config.max_width = 7680; ++ dev->mode_config.max_height = 7680; + dev->mode_config.funcs = &vc4_mode_funcs; + dev->mode_config.preferred_depth = 24; + dev->mode_config.async_page_flip = true; diff --git a/target/linux/brcm2708/patches-4.19/950-0559-drm-v3d-Fix-a-use-after-free-race-accessing-the-sche.patch b/target/linux/brcm2708/patches-4.19/950-0559-drm-v3d-Fix-a-use-after-free-race-accessing-the-sche.patch deleted file mode 100644 index 1692bac2a0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0559-drm-v3d-Fix-a-use-after-free-race-accessing-the-sche.patch +++ /dev/null @@ -1,73 +0,0 @@ -From f5f3df2b1746a9ba9420ae11988fc37a7b93691d Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 28 Sep 2018 16:21:23 -0700 -Subject: [PATCH 559/806] drm/v3d: Fix a use-after-free race accessing the - scheduler's fences. - -Once we push the job, the scheduler could run it and free it. So, if -we want to reference their fences, we need to grab them before then. -I haven't seen this happen in many days of conformance test runtime, -but let's still close the race. - -Signed-off-by: Eric Anholt -Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") -Link: https://patchwork.freedesktop.org/patch/254119/ -Reviewed-by: Boris Brezillon -(cherry picked from commit 34c2c4f632f232ed2fdb66d4e42cc72d322273fe) ---- - drivers/gpu/drm/v3d/v3d_drv.h | 5 +++++ - drivers/gpu/drm/v3d/v3d_gem.c | 8 ++++++-- - 2 files changed, 11 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_drv.h -+++ b/drivers/gpu/drm/v3d/v3d_drv.h -@@ -198,6 +198,11 @@ struct v3d_exec_info { - */ - struct dma_fence *bin_done_fence; - -+ /* Fence for when the scheduler considers the render to be -+ * done, for when the BOs reservations should be complete. -+ */ -+ struct dma_fence *render_done_fence; -+ - struct kref refcount; - - /* This is the array of BOs that were looked up at the start of exec. */ ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -209,7 +209,7 @@ v3d_flush_caches(struct v3d_dev *v3d) - static void - v3d_attach_object_fences(struct v3d_exec_info *exec) - { -- struct dma_fence *out_fence = &exec->render.base.s_fence->finished; -+ struct dma_fence *out_fence = exec->render_done_fence; - struct v3d_bo *bo; - int i; - -@@ -409,6 +409,7 @@ v3d_exec_cleanup(struct kref *ref) - dma_fence_put(exec->render.done_fence); - - dma_fence_put(exec->bin_done_fence); -+ dma_fence_put(exec->render_done_fence); - - for (i = 0; i < exec->bo_count; i++) - drm_gem_object_put_unlocked(&exec->bo[i]->base); -@@ -572,6 +573,9 @@ v3d_submit_cl_ioctl(struct drm_device *d - if (ret) - goto fail_unreserve; - -+ exec->render_done_fence = -+ dma_fence_get(&exec->render.base.s_fence->finished); -+ - kref_get(&exec->refcount); /* put by scheduler job completion */ - drm_sched_entity_push_job(&exec->render.base, - &v3d_priv->sched_entity[V3D_RENDER]); -@@ -585,7 +589,7 @@ v3d_submit_cl_ioctl(struct drm_device *d - sync_out = drm_syncobj_find(file_priv, args->out_sync); - if (sync_out) { - drm_syncobj_replace_fence(sync_out, -- &exec->render.base.s_fence->finished); -+ exec->render_done_fence); - drm_syncobj_put(sync_out); - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0559-drm-vc4-FKMS-reads-the-EDID-from-fw-and-supports-mod.patch b/target/linux/brcm2708/patches-4.19/950-0559-drm-vc4-FKMS-reads-the-EDID-from-fw-and-supports-mod.patch new file mode 100644 index 0000000000..db83c12f59 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0559-drm-vc4-FKMS-reads-the-EDID-from-fw-and-supports-mod.patch @@ -0,0 +1,557 @@ +From 9536044338d9c341e805e288a58090c49a793638 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 9 Apr 2019 18:23:41 +0100 +Subject: [PATCH] drm: vc4: FKMS reads the EDID from fw, and supports + mode setting + +This extends FKMS to read the EDID from the display, and support +requesting a particular mode via KMS. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 334 ++++++++++++++++++--- + include/soc/bcm2835/raspberrypi-firmware.h | 2 + + 2 files changed, 302 insertions(+), 34 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -88,11 +88,60 @@ struct mailbox_blank_display { + u32 blank; + }; + +-struct mailbox_get_width_height { ++struct mailbox_get_edid { + struct rpi_firmware_property_tag_header tag1; +- u32 display; +- struct rpi_firmware_property_tag_header tag2; +- u32 wh[2]; ++ u32 block; ++ u32 display_number; ++ u8 edid[128]; ++}; ++ ++struct set_timings { ++ u8 display; ++ u8 padding; ++ u16 video_id_code; ++ ++ u32 clock; /* in kHz */ ++ ++ u16 hdisplay; ++ u16 hsync_start; ++ ++ u16 hsync_end; ++ u16 htotal; ++ ++ u16 hskew; ++ u16 vdisplay; ++ ++ u16 vsync_start; ++ u16 vsync_end; ++ ++ u16 vtotal; ++ u16 vscan; ++ ++ u16 vrefresh; ++ u16 padding2; ++ ++ u32 flags; ++#define TIMINGS_FLAGS_H_SYNC_POS BIT(0) ++#define TIMINGS_FLAGS_H_SYNC_NEG 0 ++#define TIMINGS_FLAGS_V_SYNC_POS BIT(1) ++#define TIMINGS_FLAGS_V_SYNC_NEG 0 ++ ++#define TIMINGS_FLAGS_ASPECT_MASK GENMASK(7, 4) ++#define TIMINGS_FLAGS_ASPECT_NONE (0 << 4) ++#define TIMINGS_FLAGS_ASPECT_4_3 (1 << 4) ++#define TIMINGS_FLAGS_ASPECT_16_9 (2 << 4) ++#define TIMINGS_FLAGS_ASPECT_64_27 (3 << 4) ++#define TIMINGS_FLAGS_ASPECT_256_135 (4 << 4) ++ ++/* Limited range RGB flag. Not set corresponds to full range. */ ++#define TIMINGS_FLAGS_RGB_LIMITED BIT(8) ++/* DVI monitor, therefore disable infoframes. Not set corresponds to HDMI. */ ++#define TIMINGS_FLAGS_DVI BIT(9) ++}; ++ ++struct mailbox_set_mode { ++ struct rpi_firmware_property_tag_header tag1; ++ struct set_timings timings; + }; + + static const struct vc_image_format { +@@ -186,6 +235,7 @@ struct vc4_crtc { + u32 overscan[4]; + bool vblank_enabled; + u32 display_number; ++ u32 display_type; + }; + + static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) +@@ -195,6 +245,8 @@ static inline struct vc4_crtc *to_vc4_cr + + struct vc4_fkms_encoder { + struct drm_encoder base; ++ bool hdmi_monitor; ++ bool rgb_range_selectable; + }; + + static inline struct vc4_fkms_encoder * +@@ -212,7 +264,9 @@ struct vc4_fkms_connector { + * hook. + */ + struct drm_encoder *encoder; +- u32 display_idx; ++ struct vc4_dev *vc4_dev; ++ u32 display_number; ++ u32 display_type; + }; + + static inline struct vc4_fkms_connector * +@@ -221,6 +275,26 @@ to_vc4_fkms_connector(struct drm_connect + return container_of(connector, struct vc4_fkms_connector, base); + } + ++static u32 vc4_get_display_type(u32 display_number) ++{ ++ const u32 display_types[] = { ++ /* The firmware display (DispmanX) IDs map to specific types in ++ * a fixed manner. ++ */ ++ DRM_MODE_ENCODER_DSI, /* MAIN_LCD */ ++ DRM_MODE_ENCODER_DSI, /* AUX_LCD */ ++ DRM_MODE_ENCODER_TMDS, /* HDMI0 */ ++ DRM_MODE_ENCODER_TVDAC, /* VEC */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_LCD */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_TV */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_OTHER */ ++ DRM_MODE_ENCODER_TMDS, /* HDMI1 */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_TV2 */ ++ }; ++ return display_number > ARRAY_SIZE(display_types) - 1 ? ++ DRM_MODE_ENCODER_NONE : display_types[display_number]; ++} ++ + /* Firmware's structure for making an FB mbox call. */ + struct fbinfo_s { + u32 xres, yres, xres_virtual, yres_virtual; +@@ -255,10 +329,15 @@ static int vc4_plane_set_blank(struct dr + .plane_id = vc4_plane->mb.plane.plane_id, + } + }; ++ static const char * const plane_types[] = { ++ "overlay", ++ "primary", ++ "cursor" ++ }; + int ret; + +- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] overlay plane %s", +- plane->base.id, plane->name, ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] %s plane %s", ++ plane->base.id, plane->name, plane_types[plane->type], + blank ? "blank" : "unblank"); + + if (blank) +@@ -593,13 +672,102 @@ fail: + + static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) + { +- /* Everyting is handled in the planes. */ ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_display_mode *mode = &crtc->state->adjusted_mode; ++ struct vc4_fkms_encoder *vc4_encoder = ++ to_vc4_fkms_encoder(vc4_crtc->encoder); ++ struct mailbox_set_mode mb = { ++ .tag1 = { RPI_FIRMWARE_SET_TIMING, ++ sizeof(struct set_timings), 0}, ++ }; ++ union hdmi_infoframe frame; ++ int ret; ++ ++ ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode, false); ++ if (ret < 0) { ++ DRM_ERROR("couldn't fill AVI infoframe\n"); ++ return; ++ } ++ ++ DRM_DEBUG_KMS("Setting mode for display num %u mode name %s, clk %d, h(disp %d, start %d, end %d, total %d, skew %d) v(disp %d, start %d, end %d, total %d, scan %d), vrefresh %d, par %u\n", ++ vc4_crtc->display_number, mode->name, mode->clock, ++ mode->hdisplay, mode->hsync_start, mode->hsync_end, ++ mode->htotal, mode->hskew, mode->vdisplay, ++ mode->vsync_start, mode->vsync_end, mode->vtotal, ++ mode->vscan, mode->vrefresh, mode->picture_aspect_ratio); ++ mb.timings.display = vc4_crtc->display_number; ++ ++ mb.timings.video_id_code = frame.avi.video_code; ++ ++ mb.timings.clock = mode->clock; ++ mb.timings.hdisplay = mode->hdisplay; ++ mb.timings.hsync_start = mode->hsync_start; ++ mb.timings.hsync_end = mode->hsync_end; ++ mb.timings.htotal = mode->htotal; ++ mb.timings.hskew = mode->hskew; ++ mb.timings.vdisplay = mode->vdisplay; ++ mb.timings.vsync_start = mode->vsync_start; ++ mb.timings.vsync_end = mode->vsync_end; ++ mb.timings.vtotal = mode->vtotal; ++ mb.timings.vscan = mode->vscan; ++ mb.timings.vrefresh = 0; ++ mb.timings.flags = 0; ++ if (mode->flags & DRM_MODE_FLAG_PHSYNC) ++ mb.timings.flags |= TIMINGS_FLAGS_H_SYNC_POS; ++ if (mode->flags & DRM_MODE_FLAG_PVSYNC) ++ mb.timings.flags |= TIMINGS_FLAGS_V_SYNC_POS; ++ ++ switch (frame.avi.picture_aspect) { ++ default: ++ case HDMI_PICTURE_ASPECT_NONE: ++ mode->flags |= TIMINGS_FLAGS_ASPECT_NONE; ++ break; ++ case HDMI_PICTURE_ASPECT_4_3: ++ mode->flags |= TIMINGS_FLAGS_ASPECT_4_3; ++ break; ++ case HDMI_PICTURE_ASPECT_16_9: ++ mode->flags |= TIMINGS_FLAGS_ASPECT_16_9; ++ break; ++ case HDMI_PICTURE_ASPECT_64_27: ++ mode->flags |= TIMINGS_FLAGS_ASPECT_64_27; ++ break; ++ case HDMI_PICTURE_ASPECT_256_135: ++ mode->flags |= TIMINGS_FLAGS_ASPECT_256_135; ++ break; ++ } ++ ++ if (!vc4_encoder->hdmi_monitor) ++ mb.timings.flags |= TIMINGS_FLAGS_DVI; ++ else if (drm_default_rgb_quant_range(mode) == ++ HDMI_QUANTIZATION_RANGE_LIMITED) ++ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; ++ ++ /* ++ FIXME: To implement ++ switch(mode->flag & DRM_MODE_FLAG_3D_MASK) { ++ case DRM_MODE_FLAG_3D_NONE: ++ case DRM_MODE_FLAG_3D_FRAME_PACKING: ++ case DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: ++ case DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: ++ case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: ++ case DRM_MODE_FLAG_3D_L_DEPTH: ++ case DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ++ case DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: ++ case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: ++ } ++ */ ++ ++ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); + } + + static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { + struct drm_plane *plane; + ++ DRM_DEBUG_KMS("[CRTC:%d] vblanks off.\n", ++ crtc->base.id); + drm_crtc_vblank_off(crtc); + + /* Always turn the planes off on CRTC disable. In DRM, planes +@@ -617,6 +785,8 @@ static void vc4_crtc_enable(struct drm_c + { + struct drm_plane *plane; + ++ DRM_DEBUG_KMS("[CRTC:%d] vblanks on.\n", ++ crtc->base.id); + drm_crtc_vblank_on(crtc); + + /* Unblank the planes (if they're supposed to be displayed). */ +@@ -635,12 +805,20 @@ vc4_crtc_mode_valid(struct drm_crtc *crt + return MODE_NO_DBLESCAN; + } + ++ /* Limit the pixel clock until we can get dynamic HDMI 2.0 scrambling ++ * working. ++ */ ++ if (mode->clock > 340000) ++ return MODE_CLOCK_HIGH; ++ + return MODE_OK; + } + + static int vc4_crtc_atomic_check(struct drm_crtc *crtc, + struct drm_crtc_state *state) + { ++ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", ++ crtc->base.id); + return 0; + } + +@@ -650,6 +828,8 @@ static void vc4_crtc_atomic_flush(struct + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + struct drm_device *dev = crtc->dev; + ++ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_flush.\n", ++ crtc->base.id); + if (crtc->state->event) { + unsigned long flags; + +@@ -717,6 +897,8 @@ static int vc4_fkms_enable_vblank(struct + { + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + ++ DRM_DEBUG_KMS("[CRTC:%d] enable_vblank.\n", ++ crtc->base.id); + vc4_crtc->vblank_enabled = true; + + return 0; +@@ -726,6 +908,8 @@ static void vc4_fkms_disable_vblank(stru + { + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + ++ DRM_DEBUG_KMS("[CRTC:%d] disable_vblank.\n", ++ crtc->base.id); + vc4_crtc->vblank_enabled = false; + } + +@@ -760,36 +944,92 @@ static const struct of_device_id vc4_fir + static enum drm_connector_status + vc4_fkms_connector_detect(struct drm_connector *connector, bool force) + { ++ DRM_DEBUG_KMS("connector detect.\n"); + return connector_status_connected; + } + +-static int vc4_fkms_connector_get_modes(struct drm_connector *connector) ++static int vc4_fkms_get_edid_block(void *data, u8 *buf, unsigned int block, ++ size_t len) + { +- struct drm_device *dev = connector->dev; + struct vc4_fkms_connector *fkms_connector = +- to_vc4_fkms_connector(connector); +- struct vc4_dev *vc4 = to_vc4_dev(dev); +- struct drm_display_mode *mode; +- struct mailbox_get_width_height wh = { +- .tag1 = {RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, 4, 0, }, +- .display = fkms_connector->display_idx, +- .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, +- 8, 0, }, ++ (struct vc4_fkms_connector *)data; ++ struct vc4_dev *vc4 = fkms_connector->vc4_dev; ++ struct mailbox_get_edid mb = { ++ .tag1 = { RPI_FIRMWARE_GET_EDID_BLOCK_DISPLAY, ++ 128 + 8, 0 }, ++ .block = block, ++ .display_number = fkms_connector->display_number, + }; +- int ret; ++ int ret = 0; ++ ++ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); ++ ++ if (!ret) ++ memcpy(buf, mb.edid, len); ++ ++ return ret; ++} ++ ++static int vc4_fkms_connector_get_modes(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct drm_encoder *encoder = fkms_connector->encoder; ++ struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); ++ int ret = 0; ++ struct edid *edid; ++ ++ edid = drm_do_get_edid(connector, vc4_fkms_get_edid_block, ++ fkms_connector); ++ ++ /* FIXME: Can we do CEC? ++ * cec_s_phys_addr_from_edid(vc4->hdmi->cec_adap, edid); ++ * if (!edid) ++ * return -ENODEV; ++ */ ++ ++ vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid); + +- ret = rpi_firmware_property_list(vc4->firmware, &wh, sizeof(wh)); ++ if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { ++ vc4_encoder->rgb_range_selectable = ++ drm_rgb_quant_range_selectable(edid); ++ } ++ ++ drm_connector_update_edid_property(connector, edid); ++ ret = drm_add_edid_modes(connector, edid); ++ kfree(edid); ++ ++ return ret; ++} ++ ++/* FIXME: Read LCD mode from the firmware. This is the DSI panel resolution. */ ++static const struct drm_display_mode lcd_mode = { ++ DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, ++ 25979400 / 1000, ++ 800, 800 + 1, 800 + 1 + 2, 800 + 1 + 2 + 46, 0, ++ 480, 480 + 7, 480 + 7 + 2, 480 + 7 + 2 + 21, 0, ++ DRM_MODE_FLAG_INTERLACE) ++}; ++ ++static int vc4_fkms_lcd_connector_get_modes(struct drm_connector *connector) ++{ ++ //struct vc4_fkms_connector *fkms_connector = ++ // to_vc4_fkms_connector(connector); ++ //struct drm_encoder *encoder = fkms_connector->encoder; ++ //struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); ++ struct drm_display_mode *mode; ++ //int ret = 0; + +- if (ret) { +- DRM_ERROR("Failed to get screen size: %d (0x%08x 0x%08x)\n", +- ret, wh.wh[0], wh.wh[1]); +- return 0; ++ mode = drm_mode_duplicate(connector->dev, ++ &lcd_mode); ++ if (!mode) { ++ DRM_ERROR("Failed to create a new display mode\n"); ++ return -ENOMEM; + } + +- mode = drm_cvt_mode(dev, wh.wh[0], wh.wh[1], 60 /* vrefresh */, +- 0, 0, false); + drm_mode_probed_add(connector, mode); + ++ /* We have one mode */ + return 1; + } + +@@ -798,11 +1038,14 @@ vc4_fkms_connector_best_encoder(struct d + { + struct vc4_fkms_connector *fkms_connector = + to_vc4_fkms_connector(connector); ++ DRM_DEBUG_KMS("best_connector.\n"); + return fkms_connector->encoder; + } + + static void vc4_fkms_connector_destroy(struct drm_connector *connector) + { ++ DRM_DEBUG_KMS("[CONNECTOR:%d] destroy.\n", ++ connector->base.id); + drm_connector_unregister(connector); + drm_connector_cleanup(connector); + } +@@ -821,14 +1064,22 @@ static const struct drm_connector_helper + .best_encoder = vc4_fkms_connector_best_encoder, + }; + ++static const struct drm_connector_helper_funcs vc4_fkms_lcd_conn_helper_funcs = { ++ .get_modes = vc4_fkms_lcd_connector_get_modes, ++ .best_encoder = vc4_fkms_connector_best_encoder, ++}; ++ + static struct drm_connector * + vc4_fkms_connector_init(struct drm_device *dev, struct drm_encoder *encoder, +- u32 display_idx) ++ u32 display_num) + { + struct drm_connector *connector = NULL; + struct vc4_fkms_connector *fkms_connector; ++ struct vc4_dev *vc4_dev = to_vc4_dev(dev); + int ret = 0; + ++ DRM_DEBUG_KMS("connector_init, display_num %u\n", display_num); ++ + fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), + GFP_KERNEL); + if (!fkms_connector) { +@@ -838,11 +1089,21 @@ vc4_fkms_connector_init(struct drm_devic + connector = &fkms_connector->base; + + fkms_connector->encoder = encoder; +- fkms_connector->display_idx = display_idx; +- +- drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, +- DRM_MODE_CONNECTOR_HDMIA); +- drm_connector_helper_add(connector, &vc4_fkms_connector_helper_funcs); ++ fkms_connector->display_number = display_num; ++ fkms_connector->display_type = vc4_get_display_type(display_num); ++ fkms_connector->vc4_dev = vc4_dev; ++ ++ if (fkms_connector->display_type == DRM_MODE_ENCODER_DSI) { ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_DSI); ++ drm_connector_helper_add(connector, ++ &vc4_fkms_lcd_conn_helper_funcs); ++ } else { ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_HDMIA); ++ drm_connector_helper_add(connector, ++ &vc4_fkms_connector_helper_funcs); ++ } + + connector->polled = (DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT); +@@ -863,6 +1124,7 @@ vc4_fkms_connector_init(struct drm_devic + + static void vc4_fkms_encoder_destroy(struct drm_encoder *encoder) + { ++ DRM_DEBUG_KMS("Encoder_destroy\n"); + drm_encoder_cleanup(encoder); + } + +@@ -872,10 +1134,12 @@ static const struct drm_encoder_funcs vc + + static void vc4_fkms_encoder_enable(struct drm_encoder *encoder) + { ++ DRM_DEBUG_KMS("Encoder_enable\n"); + } + + static void vc4_fkms_encoder_disable(struct drm_encoder *encoder) + { ++ DRM_DEBUG_KMS("Encoder_disable\n"); + } + + static const struct drm_encoder_helper_funcs vc4_fkms_encoder_helper_funcs = { +@@ -907,6 +1171,7 @@ static int vc4_fkms_create_screen(struct + crtc = &vc4_crtc->base; + + vc4_crtc->display_number = display_ref; ++ vc4_crtc->display_type = vc4_get_display_type(display_ref); + + /* Blank the firmware provided framebuffer */ + rpi_firmware_property_list(vc4->firmware, &blank, sizeof(blank)); +@@ -950,13 +1215,14 @@ static int vc4_fkms_create_screen(struct + return -ENOMEM; + vc4_crtc->encoder = &vc4_encoder->base; + vc4_encoder->base.possible_crtcs |= drm_crtc_mask(crtc) ; ++ + drm_encoder_init(drm, &vc4_encoder->base, &vc4_fkms_encoder_funcs, +- DRM_MODE_ENCODER_TMDS, NULL); ++ vc4_crtc->display_type, NULL); + drm_encoder_helper_add(&vc4_encoder->base, + &vc4_fkms_encoder_helper_funcs); + + vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base, +- display_idx); ++ display_ref); + if (IS_ERR(vc4_crtc->connector)) { + ret = PTR_ERR(vc4_crtc->connector); + goto err_destroy_encoder; +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -78,6 +78,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, + RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, + RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021, ++ RPI_FIRMWARE_GET_EDID_BLOCK_DISPLAY = 0x00030023, + RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, + RPI_FIRMWARE_GET_THROTTLED = 0x00030046, + RPI_FIRMWARE_GET_CLOCK_MEASURED = 0x00030047, +@@ -150,6 +151,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, + + RPI_FIRMWARE_SET_PLANE = 0x00048015, ++ RPI_FIRMWARE_SET_TIMING = 0x00048017, + + RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, + RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, diff --git a/target/linux/brcm2708/patches-4.19/950-0560-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch b/target/linux/brcm2708/patches-4.19/950-0560-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch new file mode 100644 index 0000000000..ca70b9ddbf --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0560-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch @@ -0,0 +1,53 @@ +From bf85b92a97a95161d98874571c520fb1395c5aa2 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 2 May 2019 15:11:05 -0700 +Subject: [PATCH] clk: bcm2835: Add support for setting leaf clock + rates while running. + +As long as you wait for !BUSY, you can do glitch-free updates of clock +rate while the clock is running. + +Signed-off-by: Eric Anholt +--- + drivers/clk/bcm/clk-bcm2835.c | 22 +++++++++++++--------- + 1 file changed, 13 insertions(+), 9 deletions(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1097,15 +1097,19 @@ static int bcm2835_clock_set_rate(struct + + spin_lock(&cprman->regs_lock); + +- /* +- * Setting up frac support +- * +- * In principle it is recommended to stop/start the clock first, +- * but as we set CLK_SET_RATE_GATE during registration of the +- * clock this requirement should be take care of by the +- * clk-framework. ++ ctl = cprman_read(cprman, data->ctl_reg); ++ ++ /* If the clock is running, we have to pause clock generation while ++ * updating the control and div regs. This is glitchless (no clock ++ * signals generated faster than the rate) but each reg access is two ++ * OSC cycles so the clock will slow down for a moment. + */ +- ctl = cprman_read(cprman, data->ctl_reg) & ~CM_FRAC; ++ if (ctl & CM_ENABLE) { ++ cprman_write(cprman, data->ctl_reg, ctl & ~CM_ENABLE); ++ bcm2835_clock_wait_busy(clock); ++ } ++ ++ ctl &= ~CM_FRAC; + ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0; + cprman_write(cprman, data->ctl_reg, ctl); + +@@ -1475,7 +1479,7 @@ static struct clk_hw *bcm2835_register_c + init.ops = &bcm2835_vpu_clock_clk_ops; + } else { + init.ops = &bcm2835_clock_clk_ops; +- init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE; ++ init.flags |= CLK_SET_PARENT_GATE; + + /* If the clock wasn't actually enabled at boot, it's not + * critical. diff --git a/target/linux/brcm2708/patches-4.19/950-0560-drm-v3d-Add-a-little-debugfs-entry-for-measuring-the.patch b/target/linux/brcm2708/patches-4.19/950-0560-drm-v3d-Add-a-little-debugfs-entry-for-measuring-the.patch deleted file mode 100644 index 0daf48360c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0560-drm-v3d-Add-a-little-debugfs-entry-for-measuring-the.patch +++ /dev/null @@ -1,106 +0,0 @@ -From 18f93916e42ea25fc77cab20d1e038620e33d741 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 28 Sep 2018 16:21:24 -0700 -Subject: [PATCH 560/806] drm/v3d: Add a little debugfs entry for measuring the - core clock. - -This adds just enough performance counter support to measure the -clock. We don't have linux kernel drivers for the clock driving the -HW, and this was useful for determining that the V3D HW is running on -a slow clock, not that the driver was slow. - -Signed-off-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-2-eric@anholt.net -Reviewed-by: Boris Brezillon -(cherry picked from commit 6915c9a525e575732429c22b28eb11871a29374b) ---- - drivers/gpu/drm/v3d/v3d_debugfs.c | 35 +++++++++++++++++++++++++++++++ - drivers/gpu/drm/v3d/v3d_regs.h | 30 ++++++++++++++++++++++++++ - 2 files changed, 65 insertions(+) - ---- a/drivers/gpu/drm/v3d/v3d_debugfs.c -+++ b/drivers/gpu/drm/v3d/v3d_debugfs.c -@@ -179,9 +179,44 @@ static int v3d_debugfs_bo_stats(struct s - return 0; - } - -+static int v3d_measure_clock(struct seq_file *m, void *unused) -+{ -+ struct drm_info_node *node = (struct drm_info_node *)m->private; -+ struct drm_device *dev = node->minor->dev; -+ struct v3d_dev *v3d = to_v3d_dev(dev); -+ uint32_t cycles; -+ int core = 0; -+ int measure_ms = 1000; -+ -+ if (v3d->ver >= 40) { -+ V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3, -+ V3D_SET_FIELD(V3D_PCTR_CYCLE_COUNT, -+ V3D_PCTR_S0)); -+ V3D_CORE_WRITE(core, V3D_V4_PCTR_0_CLR, 1); -+ V3D_CORE_WRITE(core, V3D_V4_PCTR_0_EN, 1); -+ } else { -+ V3D_CORE_WRITE(core, V3D_V3_PCTR_0_PCTRS0, -+ V3D_PCTR_CYCLE_COUNT); -+ V3D_CORE_WRITE(core, V3D_V3_PCTR_0_CLR, 1); -+ V3D_CORE_WRITE(core, V3D_V3_PCTR_0_EN, -+ V3D_V3_PCTR_0_EN_ENABLE | -+ 1); -+ } -+ msleep(measure_ms); -+ cycles = V3D_CORE_READ(core, V3D_PCTR_0_PCTR0); -+ -+ seq_printf(m, "cycles: %d (%d.%d Mhz)\n", -+ cycles, -+ cycles / (measure_ms * 1000), -+ (cycles / (measure_ms * 100)) % 10); -+ -+ return 0; -+} -+ - static const struct drm_info_list v3d_debugfs_list[] = { - {"v3d_ident", v3d_v3d_debugfs_ident, 0}, - {"v3d_regs", v3d_v3d_debugfs_regs, 0}, -+ {"measure_clock", v3d_measure_clock, 0}, - {"bo_stats", v3d_debugfs_bo_stats, 0}, - }; - ---- a/drivers/gpu/drm/v3d/v3d_regs.h -+++ b/drivers/gpu/drm/v3d/v3d_regs.h -@@ -267,6 +267,36 @@ - # define V3D_PTB_BXCF_RWORDERDISA BIT(1) - # define V3D_PTB_BXCF_CLIPDISA BIT(0) - -+#define V3D_V3_PCTR_0_EN 0x00674 -+#define V3D_V3_PCTR_0_EN_ENABLE BIT(31) -+#define V3D_V4_PCTR_0_EN 0x00650 -+/* When a bit is set, resets the counter to 0. */ -+#define V3D_V3_PCTR_0_CLR 0x00670 -+#define V3D_V4_PCTR_0_CLR 0x00654 -+#define V3D_PCTR_0_OVERFLOW 0x00658 -+ -+#define V3D_V3_PCTR_0_PCTRS0 0x00684 -+#define V3D_V3_PCTR_0_PCTRS15 0x00660 -+#define V3D_V3_PCTR_0_PCTRSX(x) (V3D_V3_PCTR_0_PCTRS0 + \ -+ 4 * (x)) -+/* Each src reg muxes four counters each. */ -+#define V3D_V4_PCTR_0_SRC_0_3 0x00660 -+#define V3D_V4_PCTR_0_SRC_28_31 0x0067c -+# define V3D_PCTR_S0_MASK V3D_MASK(6, 0) -+# define V3D_PCTR_S0_SHIFT 0 -+# define V3D_PCTR_S1_MASK V3D_MASK(14, 8) -+# define V3D_PCTR_S1_SHIFT 8 -+# define V3D_PCTR_S2_MASK V3D_MASK(22, 16) -+# define V3D_PCTR_S2_SHIFT 16 -+# define V3D_PCTR_S3_MASK V3D_MASK(30, 24) -+# define V3D_PCTR_S3_SHIFT 24 -+# define V3D_PCTR_CYCLE_COUNT 32 -+ -+/* Output values of the counters. */ -+#define V3D_PCTR_0_PCTR0 0x00680 -+#define V3D_PCTR_0_PCTR31 0x006fc -+#define V3D_PCTR_0_PCTRX(x) (V3D_PCTR_0_PCTR0 + \ -+ 4 * (x)) - #define V3D_GMP_STATUS 0x00800 - # define V3D_GMP_STATUS_GMPRST BIT(31) - # define V3D_GMP_STATUS_WR_COUNT_MASK V3D_MASK(30, 24) diff --git a/target/linux/brcm2708/patches-4.19/950-0561-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch b/target/linux/brcm2708/patches-4.19/950-0561-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch new file mode 100644 index 0000000000..490466d7da --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0561-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch @@ -0,0 +1,71 @@ +From d46285327ba5961c992643d468b2862c70f4c7e5 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 2 May 2019 15:24:04 -0700 +Subject: [PATCH] clk: bcm2835: Allow reparenting leaf clocks while + they're running. + +This falls under the same "we can reprogram glitch-free as long as we +pause generation" rule as updating the div/frac fields. This can be +used for runtime reclocking of V3D to manage power leakage. + +Signed-off-by: Eric Anholt +--- + drivers/clk/bcm/clk-bcm2835.c | 19 ++++++++++++++++--- + 1 file changed, 16 insertions(+), 3 deletions(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1086,8 +1086,10 @@ static int bcm2835_clock_on(struct clk_h + return 0; + } + +-static int bcm2835_clock_set_rate(struct clk_hw *hw, +- unsigned long rate, unsigned long parent_rate) ++static int bcm2835_clock_set_rate_and_parent(struct clk_hw *hw, ++ unsigned long rate, ++ unsigned long parent_rate, ++ u8 parent) + { + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; +@@ -1109,6 +1111,11 @@ static int bcm2835_clock_set_rate(struct + bcm2835_clock_wait_busy(clock); + } + ++ if (parent != 0xff) { ++ ctl &= ~(CM_SRC_MASK << CM_SRC_SHIFT); ++ ctl |= parent << CM_SRC_SHIFT; ++ } ++ + ctl &= ~CM_FRAC; + ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0; + cprman_write(cprman, data->ctl_reg, ctl); +@@ -1120,6 +1127,12 @@ static int bcm2835_clock_set_rate(struct + return 0; + } + ++static int bcm2835_clock_set_rate(struct clk_hw *hw, ++ unsigned long rate, unsigned long parent_rate) ++{ ++ return bcm2835_clock_set_rate_and_parent(hw, rate, parent_rate, 0xff); ++} ++ + static bool + bcm2835_clk_is_pllc(struct clk_hw *hw) + { +@@ -1303,6 +1316,7 @@ static const struct clk_ops bcm2835_cloc + .unprepare = bcm2835_clock_off, + .recalc_rate = bcm2835_clock_get_rate, + .set_rate = bcm2835_clock_set_rate, ++ .set_rate_and_parent = bcm2835_clock_set_rate_and_parent, + .determine_rate = bcm2835_clock_determine_rate, + .set_parent = bcm2835_clock_set_parent, + .get_parent = bcm2835_clock_get_parent, +@@ -1479,7 +1493,6 @@ static struct clk_hw *bcm2835_register_c + init.ops = &bcm2835_vpu_clock_clk_ops; + } else { + init.ops = &bcm2835_clock_clk_ops; +- init.flags |= CLK_SET_PARENT_GATE; + + /* If the clock wasn't actually enabled at boot, it's not + * critical. diff --git a/target/linux/brcm2708/patches-4.19/950-0561-drm-v3d-Update-a-comment-about-what-uses-v3d_job_dep.patch b/target/linux/brcm2708/patches-4.19/950-0561-drm-v3d-Update-a-comment-about-what-uses-v3d_job_dep.patch deleted file mode 100644 index 2401885e26..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0561-drm-v3d-Update-a-comment-about-what-uses-v3d_job_dep.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 6351d93a0f1a18c45c4407c472195d957da5d3d0 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 8 Nov 2018 08:16:52 -0800 -Subject: [PATCH 561/806] drm/v3d: Update a comment about what uses - v3d_job_dependency(). - -I merged bin and render's paths in a late refactoring. - -Signed-off-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-3-eric@anholt.net -Reviewed-by: Boris Brezillon -(cherry picked from commit e90e45f6bd45cc494a6f4cd1853c5e7cd4be7f68) ---- - drivers/gpu/drm/v3d/v3d_sched.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/gpu/drm/v3d/v3d_sched.c -+++ b/drivers/gpu/drm/v3d/v3d_sched.c -@@ -39,7 +39,7 @@ v3d_job_free(struct drm_sched_job *sched - } - - /** -- * Returns the fences that the bin job depends on, one by one. -+ * Returns the fences that the bin or render job depends on, one by one. - * v3d_job_run() won't be called until all of them have been signaled. - */ - static struct dma_fence * diff --git a/target/linux/brcm2708/patches-4.19/950-0562-drm-v3d-Add-support-for-compute-shader-dispatch.patch b/target/linux/brcm2708/patches-4.19/950-0562-drm-v3d-Add-support-for-compute-shader-dispatch.patch new file mode 100644 index 0000000000..6db0729839 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0562-drm-v3d-Add-support-for-compute-shader-dispatch.patch @@ -0,0 +1,897 @@ +From 22dbf1420a552d1952d22b92d8c30f8162b026b5 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Tue, 16 Apr 2019 15:58:54 -0700 +Subject: [PATCH] drm/v3d: Add support for compute shader dispatch. + +The compute shader dispatch interface is pretty simple -- just pass in +the regs that userspace has passed us, with no CLs to run. However, +with no CL to run it means that we need to do manual cache flushing of +the L2 after the HW execution completes (for SSBO, atomic, and +image_load_store writes that are the output of compute shaders). + +This doesn't yet expose the L2 cache's ability to have a region of the +address space not write back to memory (which could be used for +shared_var storage). + +So far, the Mesa side has been tested on V3D v4.2 simpenrose (passing +the ES31 tests), and on the kernel side on 7278 (failing atomic +compswap tests in a way that doesn't reproduce on simpenrose). + +v2: Fix excessive allocation for the clean_job (reported by Dan + Carpenter). Keep refs on jobs until clean_job is finished, to + avoid spurious MMU errors if the output BOs are freed by userspace + before L2 cleaning is finished. + +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-4-eric@anholt.net +Acked-by: Rob Clark +--- + drivers/gpu/drm/v3d/v3d_debugfs.c | 22 +++++ + drivers/gpu/drm/v3d/v3d_drv.c | 10 +- + drivers/gpu/drm/v3d/v3d_drv.h | 28 +++++- + drivers/gpu/drm/v3d/v3d_fence.c | 2 + + drivers/gpu/drm/v3d/v3d_gem.c | 156 +++++++++++++++++++++++++++++- + drivers/gpu/drm/v3d/v3d_irq.c | 16 ++- + drivers/gpu/drm/v3d/v3d_regs.h | 73 ++++++++++++++ + drivers/gpu/drm/v3d/v3d_sched.c | 121 +++++++++++++++++++++-- + drivers/gpu/drm/v3d/v3d_trace.h | 94 ++++++++++++++++++ + include/uapi/drm/v3d_drm.h | 28 ++++++ + 10 files changed, 531 insertions(+), 19 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_debugfs.c ++++ b/drivers/gpu/drm/v3d/v3d_debugfs.c +@@ -57,6 +57,17 @@ static const struct v3d_reg_def v3d_core + REGDEF(V3D_GMP_VIO_ADDR), + }; + ++static const struct v3d_reg_def v3d_csd_reg_defs[] = { ++ REGDEF(V3D_CSD_STATUS), ++ REGDEF(V3D_CSD_CURRENT_CFG0), ++ REGDEF(V3D_CSD_CURRENT_CFG1), ++ REGDEF(V3D_CSD_CURRENT_CFG2), ++ REGDEF(V3D_CSD_CURRENT_CFG3), ++ REGDEF(V3D_CSD_CURRENT_CFG4), ++ REGDEF(V3D_CSD_CURRENT_CFG5), ++ REGDEF(V3D_CSD_CURRENT_CFG6), ++}; ++ + static int v3d_v3d_debugfs_regs(struct seq_file *m, void *unused) + { + struct drm_info_node *node = (struct drm_info_node *)m->private; +@@ -88,6 +99,17 @@ static int v3d_v3d_debugfs_regs(struct s + V3D_CORE_READ(core, + v3d_core_reg_defs[i].reg)); + } ++ ++ if (v3d_has_csd(v3d)) { ++ for (i = 0; i < ARRAY_SIZE(v3d_csd_reg_defs); i++) { ++ seq_printf(m, "core %d %s (0x%04x): 0x%08x\n", ++ core, ++ v3d_csd_reg_defs[i].name, ++ v3d_csd_reg_defs[i].reg, ++ V3D_CORE_READ(core, ++ v3d_csd_reg_defs[i].reg)); ++ } ++ } + } + + return 0; +--- a/drivers/gpu/drm/v3d/v3d_drv.c ++++ b/drivers/gpu/drm/v3d/v3d_drv.c +@@ -7,9 +7,9 @@ + * This driver supports the Broadcom V3D 3.3 and 4.1 OpenGL ES GPUs. + * For V3D 2.x support, see the VC4 driver. + * +- * Currently only single-core rendering using the binner and renderer, +- * along with TFU (texture formatting unit) rendering is supported. +- * V3D 4.x's CSD (compute shader dispatch) is not yet supported. ++ * The V3D GPU includes a tiled render (composed of a bin and render ++ * pipelines), the TFU (texture formatting unit), and the CSD (compute ++ * shader dispatch). + */ + + #include +@@ -114,6 +114,9 @@ static int v3d_get_param_ioctl(struct dr + case DRM_V3D_PARAM_SUPPORTS_TFU: + args->value = 1; + return 0; ++ case DRM_V3D_PARAM_SUPPORTS_CSD: ++ args->value = v3d_has_csd(v3d); ++ return 0; + default: + DRM_DEBUG("Unknown parameter %d\n", args->param); + return -EINVAL; +@@ -183,6 +186,7 @@ static const struct drm_ioctl_desc v3d_d + DRM_IOCTL_DEF_DRV(V3D_GET_PARAM, v3d_get_param_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(V3D_GET_BO_OFFSET, v3d_get_bo_offset_ioctl, DRM_RENDER_ALLOW), + DRM_IOCTL_DEF_DRV(V3D_SUBMIT_TFU, v3d_submit_tfu_ioctl, DRM_RENDER_ALLOW | DRM_AUTH), ++ DRM_IOCTL_DEF_DRV(V3D_SUBMIT_CSD, v3d_submit_csd_ioctl, DRM_RENDER_ALLOW | DRM_AUTH), + }; + + static const struct vm_operations_struct v3d_vm_ops = { +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -16,9 +16,11 @@ enum v3d_queue { + V3D_BIN, + V3D_RENDER, + V3D_TFU, ++ V3D_CSD, ++ V3D_CACHE_CLEAN, + }; + +-#define V3D_MAX_QUEUES (V3D_TFU + 1) ++#define V3D_MAX_QUEUES (V3D_CACHE_CLEAN + 1) + + struct v3d_queue_state { + struct drm_gpu_scheduler sched; +@@ -70,6 +72,7 @@ struct v3d_dev { + struct v3d_bin_job *bin_job; + struct v3d_render_job *render_job; + struct v3d_tfu_job *tfu_job; ++ struct v3d_csd_job *csd_job; + + struct v3d_queue_state queue[V3D_MAX_QUEUES]; + +@@ -92,6 +95,12 @@ struct v3d_dev { + */ + struct mutex sched_lock; + ++ /* Lock taken during a cache clean and when initiating an L2 ++ * flush, to keep L2 flushes from interfering with the ++ * synchronous L2 cleans. ++ */ ++ struct mutex cache_clean_lock; ++ + struct { + u32 num_allocated; + u32 pages_allocated; +@@ -104,6 +113,12 @@ to_v3d_dev(struct drm_device *dev) + return (struct v3d_dev *)dev->dev_private; + } + ++static inline bool ++v3d_has_csd(struct v3d_dev *v3d) ++{ ++ return v3d->ver >= 41; ++} ++ + /* The per-fd struct, which tracks the MMU mappings. */ + struct v3d_file_priv { + struct v3d_dev *v3d; +@@ -237,6 +252,14 @@ struct v3d_tfu_job { + struct drm_v3d_submit_tfu args; + }; + ++struct v3d_csd_job { ++ struct v3d_job base; ++ ++ u32 timedout_batches; ++ ++ struct drm_v3d_submit_csd args; ++}; ++ + /** + * _wait_for - magic (register) wait macro + * +@@ -302,11 +325,14 @@ int v3d_submit_cl_ioctl(struct drm_devic + struct drm_file *file_priv); + int v3d_submit_tfu_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); ++int v3d_submit_csd_ioctl(struct drm_device *dev, void *data, ++ struct drm_file *file_priv); + int v3d_wait_bo_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); + void v3d_job_put(struct v3d_job *job); + void v3d_reset(struct v3d_dev *v3d); + void v3d_invalidate_caches(struct v3d_dev *v3d); ++void v3d_clean_caches(struct v3d_dev *v3d); + + /* v3d_irq.c */ + int v3d_irq_init(struct v3d_dev *v3d); +--- a/drivers/gpu/drm/v3d/v3d_fence.c ++++ b/drivers/gpu/drm/v3d/v3d_fence.c +@@ -36,6 +36,8 @@ static const char *v3d_fence_get_timelin + return "v3d-render"; + case V3D_TFU: + return "v3d-tfu"; ++ case V3D_CSD: ++ return "v3d-csd"; + default: + return NULL; + } +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -162,10 +162,52 @@ v3d_flush_l2t(struct v3d_dev *v3d, int c + /* While there is a busy bit (V3D_L2TCACTL_L2TFLS), we don't + * need to wait for completion before dispatching the job -- + * L2T accesses will be stalled until the flush has completed. ++ * However, we do need to make sure we don't try to trigger a ++ * new flush while the L2_CLEAN queue is trying to ++ * synchronously clean after a job. + */ ++ mutex_lock(&v3d->cache_clean_lock); + V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, + V3D_L2TCACTL_L2TFLS | + V3D_SET_FIELD(V3D_L2TCACTL_FLM_FLUSH, V3D_L2TCACTL_FLM)); ++ mutex_unlock(&v3d->cache_clean_lock); ++} ++ ++/* Cleans texture L1 and L2 cachelines (writing back dirty data). ++ * ++ * For cleaning, which happens from the CACHE_CLEAN queue after CSD has ++ * executed, we need to make sure that the clean is done before ++ * signaling job completion. So, we synchronously wait before ++ * returning, and we make sure that L2 invalidates don't happen in the ++ * meantime to confuse our are-we-done checks. ++ */ ++void ++v3d_clean_caches(struct v3d_dev *v3d) ++{ ++ struct drm_device *dev = &v3d->drm; ++ int core = 0; ++ ++ trace_v3d_cache_clean_begin(dev); ++ ++ V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, V3D_L2TCACTL_TMUWCF); ++ if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & ++ V3D_L2TCACTL_L2TFLS), 100)) { ++ DRM_ERROR("Timeout waiting for L1T write combiner flush\n"); ++ } ++ ++ mutex_lock(&v3d->cache_clean_lock); ++ V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, ++ V3D_L2TCACTL_L2TFLS | ++ V3D_SET_FIELD(V3D_L2TCACTL_FLM_CLEAN, V3D_L2TCACTL_FLM)); ++ ++ if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & ++ V3D_L2TCACTL_L2TFLS), 100)) { ++ DRM_ERROR("Timeout waiting for L2T clean\n"); ++ } ++ ++ mutex_unlock(&v3d->cache_clean_lock); ++ ++ trace_v3d_cache_clean_end(dev); + } + + /* Invalidates the slice caches. These are read-only caches. */ +@@ -584,7 +626,8 @@ static void + v3d_attach_fences_and_unlock_reservation(struct drm_file *file_priv, + struct v3d_job *job, + struct ww_acquire_ctx *acquire_ctx, +- u32 out_sync) ++ u32 out_sync, ++ struct dma_fence *done_fence) + { + struct drm_syncobj *sync_out; + +@@ -594,7 +637,7 @@ v3d_attach_fences_and_unlock_reservation + /* Update the return sync object for the job */ + sync_out = drm_syncobj_find(file_priv, out_sync); + if (sync_out) { +- drm_syncobj_replace_fence(sync_out, job->done_fence); ++ drm_syncobj_replace_fence(sync_out, done_fence); + drm_syncobj_put(sync_out); + } + } +@@ -691,8 +734,10 @@ v3d_submit_cl_ioctl(struct drm_device *d + mutex_unlock(&v3d->sched_lock); + + v3d_attach_fences_and_unlock_reservation(file_priv, +- &render->base, &acquire_ctx, +- args->out_sync); ++ &render->base, ++ &acquire_ctx, ++ args->out_sync, ++ render->base.done_fence); + + if (bin) + v3d_job_put(&bin->base); +@@ -785,7 +830,8 @@ v3d_submit_tfu_ioctl(struct drm_device * + + v3d_attach_fences_and_unlock_reservation(file_priv, + &job->base, &acquire_ctx, +- args->out_sync); ++ args->out_sync, ++ job->base.done_fence); + + v3d_job_put(&job->base); + +@@ -801,6 +847,105 @@ fail: + return ret; + } + ++/** ++ * v3d_submit_csd_ioctl() - Submits a CSD (texture formatting) job to the V3D. ++ * @dev: DRM device ++ * @data: ioctl argument ++ * @file_priv: DRM file for this fd ++ * ++ * Userspace provides the register setup for the CSD, which we don't ++ * need to validate since the CSD is behind the MMU. ++ */ ++int ++v3d_submit_csd_ioctl(struct drm_device *dev, void *data, ++ struct drm_file *file_priv) ++{ ++ struct v3d_dev *v3d = to_v3d_dev(dev); ++ struct v3d_file_priv *v3d_priv = file_priv->driver_priv; ++ struct drm_v3d_submit_csd *args = data; ++ struct v3d_csd_job *job; ++ struct v3d_job *clean_job; ++ struct ww_acquire_ctx acquire_ctx; ++ int ret; ++ ++ trace_v3d_submit_csd_ioctl(&v3d->drm, args->cfg[5], args->cfg[6]); ++ ++ if (!v3d_has_csd(v3d)) { ++ DRM_DEBUG("Attempting CSD submit on non-CSD hardware\n"); ++ return -EINVAL; ++ } ++ ++ job = kcalloc(1, sizeof(*job), GFP_KERNEL); ++ if (!job) ++ return -ENOMEM; ++ ++ ret = v3d_job_init(v3d, file_priv, &job->base, ++ v3d_job_free, args->in_sync); ++ if (ret) { ++ kfree(job); ++ return ret; ++ } ++ ++ clean_job = kcalloc(1, sizeof(*clean_job), GFP_KERNEL); ++ if (!clean_job) { ++ v3d_job_put(&job->base); ++ kfree(job); ++ return -ENOMEM; ++ } ++ ++ ret = v3d_job_init(v3d, file_priv, clean_job, v3d_job_free, 0); ++ if (ret) { ++ v3d_job_put(&job->base); ++ kfree(clean_job); ++ return ret; ++ } ++ ++ job->args = *args; ++ ++ ret = v3d_lookup_bos(dev, file_priv, clean_job, ++ args->bo_handles, args->bo_handle_count); ++ if (ret) ++ goto fail; ++ ++ ret = v3d_lock_bo_reservations(clean_job, &acquire_ctx); ++ if (ret) ++ goto fail; ++ ++ mutex_lock(&v3d->sched_lock); ++ ret = v3d_push_job(v3d_priv, &job->base, V3D_CSD); ++ if (ret) ++ goto fail_unreserve; ++ ++ ret = v3d_add_dep(clean_job, dma_fence_get(job->base.done_fence)); ++ if (ret) ++ goto fail_unreserve; ++ ret = v3d_push_job(v3d_priv, clean_job, V3D_CACHE_CLEAN); ++ if (ret) ++ goto fail_unreserve; ++ mutex_unlock(&v3d->sched_lock); ++ ++ v3d_attach_fences_and_unlock_reservation(file_priv, ++ clean_job, ++ &acquire_ctx, ++ args->out_sync, ++ clean_job->done_fence); ++ ++ v3d_job_put(&job->base); ++ v3d_job_put(clean_job); ++ ++ return 0; ++ ++fail_unreserve: ++ mutex_unlock(&v3d->sched_lock); ++ v3d_unlock_bo_reservations(clean_job->bo, clean_job->bo_count, ++ &acquire_ctx); ++fail: ++ v3d_job_put(&job->base); ++ v3d_job_put(clean_job); ++ ++ return ret; ++} ++ + int + v3d_gem_init(struct drm_device *dev) + { +@@ -816,6 +961,7 @@ v3d_gem_init(struct drm_device *dev) + mutex_init(&v3d->bo_lock); + mutex_init(&v3d->reset_lock); + mutex_init(&v3d->sched_lock); ++ mutex_init(&v3d->cache_clean_lock); + + /* Note: We don't allocate address 0. Various bits of HW + * treat 0 as special, such as the occlusion query counters +--- a/drivers/gpu/drm/v3d/v3d_irq.c ++++ b/drivers/gpu/drm/v3d/v3d_irq.c +@@ -4,9 +4,9 @@ + /** + * DOC: Interrupt management for the V3D engine + * +- * When we take a bin, render, or TFU done interrupt, we need to +- * signal the fence for that job so that the scheduler can queue up +- * the next one and unblock any waiters. ++ * When we take a bin, render, TFU done, or CSD done interrupt, we ++ * need to signal the fence for that job so that the scheduler can ++ * queue up the next one and unblock any waiters. + * + * When we take the binner out of memory interrupt, we need to + * allocate some new memory and pass it to the binner so that the +@@ -20,6 +20,7 @@ + #define V3D_CORE_IRQS ((u32)(V3D_INT_OUTOMEM | \ + V3D_INT_FLDONE | \ + V3D_INT_FRDONE | \ ++ V3D_INT_CSDDONE | \ + V3D_INT_GMPV)) + + #define V3D_HUB_IRQS ((u32)(V3D_HUB_INT_MMU_WRV | \ +@@ -108,6 +109,15 @@ v3d_irq(int irq, void *arg) + dma_fence_signal(&fence->base); + status = IRQ_HANDLED; + } ++ ++ if (intsts & V3D_INT_CSDDONE) { ++ struct v3d_fence *fence = ++ to_v3d_fence(v3d->csd_job->base.irq_fence); ++ ++ trace_v3d_csd_irq(&v3d->drm, fence->seqno); ++ dma_fence_signal(&fence->base); ++ status = IRQ_HANDLED; ++ } + + /* We shouldn't be triggering these if we have GMP in + * always-allowed mode. +--- a/drivers/gpu/drm/v3d/v3d_regs.h ++++ b/drivers/gpu/drm/v3d/v3d_regs.h +@@ -238,8 +238,11 @@ + #define V3D_CTL_L2TCACTL 0x00030 + # define V3D_L2TCACTL_TMUWCF BIT(8) + # define V3D_L2TCACTL_L2T_NO_WM BIT(4) ++/* Invalidates cache lines. */ + # define V3D_L2TCACTL_FLM_FLUSH 0 ++/* Removes cachelines without writing dirty lines back. */ + # define V3D_L2TCACTL_FLM_CLEAR 1 ++/* Writes out dirty cachelines and marks them clean, but doesn't invalidate. */ + # define V3D_L2TCACTL_FLM_CLEAN 2 + # define V3D_L2TCACTL_FLM_MASK V3D_MASK(2, 1) + # define V3D_L2TCACTL_FLM_SHIFT 1 +@@ -255,6 +258,8 @@ + #define V3D_CTL_INT_MSK_CLR 0x00064 + # define V3D_INT_QPU_MASK V3D_MASK(27, 16) + # define V3D_INT_QPU_SHIFT 16 ++# define V3D_INT_CSDDONE BIT(7) ++# define V3D_INT_PCTR BIT(6) + # define V3D_INT_GMPV BIT(5) + # define V3D_INT_TRFB BIT(4) + # define V3D_INT_SPILLUSE BIT(3) +@@ -374,4 +379,72 @@ + #define V3D_GMP_PRESERVE_LOAD 0x00818 + #define V3D_GMP_VALID_LINES 0x00820 + ++#define V3D_CSD_STATUS 0x00900 ++# define V3D_CSD_STATUS_NUM_COMPLETED_MASK V3D_MASK(11, 4) ++# define V3D_CSD_STATUS_NUM_COMPLETED_SHIFT 4 ++# define V3D_CSD_STATUS_NUM_ACTIVE_MASK V3D_MASK(3, 2) ++# define V3D_CSD_STATUS_NUM_ACTIVE_SHIFT 2 ++# define V3D_CSD_STATUS_HAVE_CURRENT_DISPATCH BIT(1) ++# define V3D_CSD_STATUS_HAVE_QUEUED_DISPATCH BIT(0) ++ ++#define V3D_CSD_QUEUED_CFG0 0x00904 ++# define V3D_CSD_QUEUED_CFG0_NUM_WGS_X_MASK V3D_MASK(31, 16) ++# define V3D_CSD_QUEUED_CFG0_NUM_WGS_X_SHIFT 16 ++# define V3D_CSD_QUEUED_CFG0_WG_X_OFFSET_MASK V3D_MASK(15, 0) ++# define V3D_CSD_QUEUED_CFG0_WG_X_OFFSET_SHIFT 0 ++ ++#define V3D_CSD_QUEUED_CFG1 0x00908 ++# define V3D_CSD_QUEUED_CFG1_NUM_WGS_Y_MASK V3D_MASK(31, 16) ++# define V3D_CSD_QUEUED_CFG1_NUM_WGS_Y_SHIFT 16 ++# define V3D_CSD_QUEUED_CFG1_WG_Y_OFFSET_MASK V3D_MASK(15, 0) ++# define V3D_CSD_QUEUED_CFG1_WG_Y_OFFSET_SHIFT 0 ++ ++#define V3D_CSD_QUEUED_CFG2 0x0090c ++# define V3D_CSD_QUEUED_CFG2_NUM_WGS_Z_MASK V3D_MASK(31, 16) ++# define V3D_CSD_QUEUED_CFG2_NUM_WGS_Z_SHIFT 16 ++# define V3D_CSD_QUEUED_CFG2_WG_Z_OFFSET_MASK V3D_MASK(15, 0) ++# define V3D_CSD_QUEUED_CFG2_WG_Z_OFFSET_SHIFT 0 ++ ++#define V3D_CSD_QUEUED_CFG3 0x00910 ++# define V3D_CSD_QUEUED_CFG3_OVERLAP_WITH_PREV BIT(26) ++# define V3D_CSD_QUEUED_CFG3_MAX_SG_ID_MASK V3D_MASK(25, 20) ++# define V3D_CSD_QUEUED_CFG3_MAX_SG_ID_SHIFT 20 ++# define V3D_CSD_QUEUED_CFG3_BATCHES_PER_SG_M1_MASK V3D_MASK(19, 12) ++# define V3D_CSD_QUEUED_CFG3_BATCHES_PER_SG_M1_SHIFT 12 ++# define V3D_CSD_QUEUED_CFG3_WGS_PER_SG_MASK V3D_MASK(11, 8) ++# define V3D_CSD_QUEUED_CFG3_WGS_PER_SG_SHIFT 8 ++# define V3D_CSD_QUEUED_CFG3_WG_SIZE_MASK V3D_MASK(7, 0) ++# define V3D_CSD_QUEUED_CFG3_WG_SIZE_SHIFT 0 ++ ++/* Number of batches, minus 1 */ ++#define V3D_CSD_QUEUED_CFG4 0x00914 ++ ++/* Shader address, pnan, singleseg, threading, like a shader record. */ ++#define V3D_CSD_QUEUED_CFG5 0x00918 ++ ++/* Uniforms address (4 byte aligned) */ ++#define V3D_CSD_QUEUED_CFG6 0x0091c ++ ++#define V3D_CSD_CURRENT_CFG0 0x00920 ++#define V3D_CSD_CURRENT_CFG1 0x00924 ++#define V3D_CSD_CURRENT_CFG2 0x00928 ++#define V3D_CSD_CURRENT_CFG3 0x0092c ++#define V3D_CSD_CURRENT_CFG4 0x00930 ++#define V3D_CSD_CURRENT_CFG5 0x00934 ++#define V3D_CSD_CURRENT_CFG6 0x00938 ++ ++#define V3D_CSD_CURRENT_ID0 0x0093c ++# define V3D_CSD_CURRENT_ID0_WG_X_MASK V3D_MASK(31, 16) ++# define V3D_CSD_CURRENT_ID0_WG_X_SHIFT 16 ++# define V3D_CSD_CURRENT_ID0_WG_IN_SG_MASK V3D_MASK(11, 8) ++# define V3D_CSD_CURRENT_ID0_WG_IN_SG_SHIFT 8 ++# define V3D_CSD_CURRENT_ID0_L_IDX_MASK V3D_MASK(7, 0) ++# define V3D_CSD_CURRENT_ID0_L_IDX_SHIFT 0 ++ ++#define V3D_CSD_CURRENT_ID1 0x00940 ++# define V3D_CSD_CURRENT_ID0_WG_Z_MASK V3D_MASK(31, 16) ++# define V3D_CSD_CURRENT_ID0_WG_Z_SHIFT 16 ++# define V3D_CSD_CURRENT_ID0_WG_Y_MASK V3D_MASK(15, 0) ++# define V3D_CSD_CURRENT_ID0_WG_Y_SHIFT 0 ++ + #endif /* V3D_REGS_H */ +--- a/drivers/gpu/drm/v3d/v3d_sched.c ++++ b/drivers/gpu/drm/v3d/v3d_sched.c +@@ -48,6 +48,12 @@ to_tfu_job(struct drm_sched_job *sched_j + return container_of(sched_job, struct v3d_tfu_job, base.base); + } + ++static struct v3d_csd_job * ++to_csd_job(struct drm_sched_job *sched_job) ++{ ++ return container_of(sched_job, struct v3d_csd_job, base.base); ++} ++ + static void + v3d_job_free(struct drm_sched_job *sched_job) + { +@@ -205,6 +211,48 @@ v3d_tfu_job_run(struct drm_sched_job *sc + return fence; + } + ++static struct dma_fence * ++v3d_csd_job_run(struct drm_sched_job *sched_job) ++{ ++ struct v3d_csd_job *job = to_csd_job(sched_job); ++ struct v3d_dev *v3d = job->base.v3d; ++ struct drm_device *dev = &v3d->drm; ++ struct dma_fence *fence; ++ int i; ++ ++ v3d->csd_job = job; ++ ++ v3d_invalidate_caches(v3d); ++ ++ fence = v3d_fence_create(v3d, V3D_CSD); ++ if (IS_ERR(fence)) ++ return NULL; ++ ++ if (job->base.irq_fence) ++ dma_fence_put(job->base.irq_fence); ++ job->base.irq_fence = dma_fence_get(fence); ++ ++ trace_v3d_submit_csd(dev, to_v3d_fence(fence)->seqno); ++ ++ for (i = 1; i <= 6; i++) ++ V3D_CORE_WRITE(0, V3D_CSD_QUEUED_CFG0 + 4 * i, job->args.cfg[i]); ++ /* CFG0 write kicks off the job. */ ++ V3D_CORE_WRITE(0, V3D_CSD_QUEUED_CFG0, job->args.cfg[0]); ++ ++ return fence; ++} ++ ++static struct dma_fence * ++v3d_cache_clean_job_run(struct drm_sched_job *sched_job) ++{ ++ struct v3d_job *job = to_v3d_job(sched_job); ++ struct v3d_dev *v3d = job->v3d; ++ ++ v3d_clean_caches(v3d); ++ ++ return NULL; ++} ++ + static void + v3d_gpu_reset_for_timeout(struct v3d_dev *v3d, struct drm_sched_job *sched_job) + { +@@ -277,13 +325,31 @@ v3d_render_job_timedout(struct drm_sched + } + + static void +-v3d_tfu_job_timedout(struct drm_sched_job *sched_job) ++v3d_generic_job_timedout(struct drm_sched_job *sched_job) + { + struct v3d_job *job = to_v3d_job(sched_job); + + v3d_gpu_reset_for_timeout(job->v3d, sched_job); + } + ++static void ++v3d_csd_job_timedout(struct drm_sched_job *sched_job) ++{ ++ struct v3d_csd_job *job = to_csd_job(sched_job); ++ struct v3d_dev *v3d = job->base.v3d; ++ u32 batches = V3D_CORE_READ(0, V3D_CSD_CURRENT_CFG4); ++ ++ /* If we've made progress, skip reset and let the timer get ++ * rearmed. ++ */ ++ if (job->timedout_batches != batches) { ++ job->timedout_batches = batches; ++ return; ++ } ++ ++ v3d_gpu_reset_for_timeout(v3d, sched_job); ++} ++ + static const struct drm_sched_backend_ops v3d_bin_sched_ops = { + .dependency = v3d_job_dependency, + .run_job = v3d_bin_job_run, +@@ -301,10 +367,24 @@ static const struct drm_sched_backend_op + static const struct drm_sched_backend_ops v3d_tfu_sched_ops = { + .dependency = v3d_job_dependency, + .run_job = v3d_tfu_job_run, +- .timedout_job = v3d_tfu_job_timedout, ++ .timedout_job = v3d_generic_job_timedout, + .free_job = v3d_job_free, + }; + ++static const struct drm_sched_backend_ops v3d_csd_sched_ops = { ++ .dependency = v3d_job_dependency, ++ .run_job = v3d_csd_job_run, ++ .timedout_job = v3d_csd_job_timedout, ++ .free_job = v3d_job_free ++}; ++ ++static const struct drm_sched_backend_ops v3d_cache_clean_sched_ops = { ++ .dependency = v3d_job_dependency, ++ .run_job = v3d_cache_clean_job_run, ++ .timedout_job = v3d_generic_job_timedout, ++ .free_job = v3d_job_free ++}; ++ + int + v3d_sched_init(struct v3d_dev *v3d) + { +@@ -331,7 +411,7 @@ v3d_sched_init(struct v3d_dev *v3d) + if (ret) { + dev_err(v3d->dev, "Failed to create render scheduler: %d.", + ret); +- drm_sched_fini(&v3d->queue[V3D_BIN].sched); ++ v3d_sched_fini(v3d); + return ret; + } + +@@ -343,11 +423,36 @@ v3d_sched_init(struct v3d_dev *v3d) + if (ret) { + dev_err(v3d->dev, "Failed to create TFU scheduler: %d.", + ret); +- drm_sched_fini(&v3d->queue[V3D_RENDER].sched); +- drm_sched_fini(&v3d->queue[V3D_BIN].sched); ++ v3d_sched_fini(v3d); + return ret; + } + ++ if (v3d_has_csd(v3d)) { ++ ret = drm_sched_init(&v3d->queue[V3D_CSD].sched, ++ &v3d_csd_sched_ops, ++ hw_jobs_limit, job_hang_limit, ++ msecs_to_jiffies(hang_limit_ms), ++ "v3d_csd"); ++ if (ret) { ++ dev_err(v3d->dev, "Failed to create CSD scheduler: %d.", ++ ret); ++ v3d_sched_fini(v3d); ++ return ret; ++ } ++ ++ ret = drm_sched_init(&v3d->queue[V3D_CACHE_CLEAN].sched, ++ &v3d_cache_clean_sched_ops, ++ hw_jobs_limit, job_hang_limit, ++ msecs_to_jiffies(hang_limit_ms), ++ "v3d_cache_clean"); ++ if (ret) { ++ dev_err(v3d->dev, "Failed to create CACHE_CLEAN scheduler: %d.", ++ ret); ++ v3d_sched_fini(v3d); ++ return ret; ++ } ++ } ++ + return 0; + } + +@@ -356,6 +461,8 @@ v3d_sched_fini(struct v3d_dev *v3d) + { + enum v3d_queue q; + +- for (q = 0; q < V3D_MAX_QUEUES; q++) +- drm_sched_fini(&v3d->queue[q].sched); ++ for (q = 0; q < V3D_MAX_QUEUES; q++) { ++ if (v3d->queue[q].sched.ops) ++ drm_sched_fini(&v3d->queue[q].sched); ++ } + } +--- a/drivers/gpu/drm/v3d/v3d_trace.h ++++ b/drivers/gpu/drm/v3d/v3d_trace.h +@@ -124,6 +124,26 @@ TRACE_EVENT(v3d_tfu_irq, + __entry->seqno) + ); + ++TRACE_EVENT(v3d_csd_irq, ++ TP_PROTO(struct drm_device *dev, ++ uint64_t seqno), ++ TP_ARGS(dev, seqno), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ __field(u64, seqno) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ __entry->seqno = seqno; ++ ), ++ ++ TP_printk("dev=%u, seqno=%llu", ++ __entry->dev, ++ __entry->seqno) ++); ++ + TRACE_EVENT(v3d_submit_tfu_ioctl, + TP_PROTO(struct drm_device *dev, u32 iia), + TP_ARGS(dev, iia), +@@ -163,6 +183,80 @@ TRACE_EVENT(v3d_submit_tfu, + __entry->seqno) + ); + ++TRACE_EVENT(v3d_submit_csd_ioctl, ++ TP_PROTO(struct drm_device *dev, u32 cfg5, u32 cfg6), ++ TP_ARGS(dev, cfg5, cfg6), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ __field(u32, cfg5) ++ __field(u32, cfg6) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ __entry->cfg5 = cfg5; ++ __entry->cfg6 = cfg6; ++ ), ++ ++ TP_printk("dev=%u, CFG5 0x%08x, CFG6 0x%08x", ++ __entry->dev, ++ __entry->cfg5, ++ __entry->cfg6) ++); ++ ++TRACE_EVENT(v3d_submit_csd, ++ TP_PROTO(struct drm_device *dev, ++ uint64_t seqno), ++ TP_ARGS(dev, seqno), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ __field(u64, seqno) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ __entry->seqno = seqno; ++ ), ++ ++ TP_printk("dev=%u, seqno=%llu", ++ __entry->dev, ++ __entry->seqno) ++); ++ ++TRACE_EVENT(v3d_cache_clean_begin, ++ TP_PROTO(struct drm_device *dev), ++ TP_ARGS(dev), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ ), ++ ++ TP_printk("dev=%u", ++ __entry->dev) ++); ++ ++TRACE_EVENT(v3d_cache_clean_end, ++ TP_PROTO(struct drm_device *dev), ++ TP_ARGS(dev), ++ ++ TP_STRUCT__entry( ++ __field(u32, dev) ++ ), ++ ++ TP_fast_assign( ++ __entry->dev = dev->primary->index; ++ ), ++ ++ TP_printk("dev=%u", ++ __entry->dev) ++); ++ + TRACE_EVENT(v3d_reset_begin, + TP_PROTO(struct drm_device *dev), + TP_ARGS(dev), +--- a/include/uapi/drm/v3d_drm.h ++++ b/include/uapi/drm/v3d_drm.h +@@ -37,6 +37,7 @@ extern "C" { + #define DRM_V3D_GET_PARAM 0x04 + #define DRM_V3D_GET_BO_OFFSET 0x05 + #define DRM_V3D_SUBMIT_TFU 0x06 ++#define DRM_V3D_SUBMIT_CSD 0x07 + + #define DRM_IOCTL_V3D_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl) + #define DRM_IOCTL_V3D_WAIT_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo) +@@ -45,6 +46,7 @@ extern "C" { + #define DRM_IOCTL_V3D_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_PARAM, struct drm_v3d_get_param) + #define DRM_IOCTL_V3D_GET_BO_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_BO_OFFSET, struct drm_v3d_get_bo_offset) + #define DRM_IOCTL_V3D_SUBMIT_TFU DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_TFU, struct drm_v3d_submit_tfu) ++#define DRM_IOCTL_V3D_SUBMIT_CSD DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CSD, struct drm_v3d_submit_csd) + + /** + * struct drm_v3d_submit_cl - ioctl argument for submitting commands to the 3D +@@ -172,6 +174,7 @@ enum drm_v3d_param { + DRM_V3D_PARAM_V3D_CORE0_IDENT1, + DRM_V3D_PARAM_V3D_CORE0_IDENT2, + DRM_V3D_PARAM_SUPPORTS_TFU, ++ DRM_V3D_PARAM_SUPPORTS_CSD, + }; + + struct drm_v3d_get_param { +@@ -212,6 +215,31 @@ struct drm_v3d_submit_tfu { + __u32 out_sync; + }; + ++/* Submits a compute shader for dispatch. This job will block on any ++ * previous compute shaders submitted on this fd, and any other ++ * synchronization must be performed with in_sync/out_sync. ++ */ ++struct drm_v3d_submit_csd { ++ __u32 cfg[7]; ++ __u32 coef[4]; ++ ++ /* Pointer to a u32 array of the BOs that are referenced by the job. ++ */ ++ __u64 bo_handles; ++ ++ /* Number of BO handles passed in (size is that times 4). */ ++ __u32 bo_handle_count; ++ ++ /* sync object to block on before running the CSD job. Each ++ * CSD job will execute in the order submitted to its FD. ++ * Synchronization against rendering/TFU jobs or CSD from ++ * other fds requires using sync objects. ++ */ ++ __u32 in_sync; ++ /* Sync object to signal when the CSD job is done. */ ++ __u32 out_sync; ++}; ++ + #if defined(__cplusplus) + } + #endif diff --git a/target/linux/brcm2708/patches-4.19/950-0562-drm-v3d-Clean-up-the-reservation-object-setup.patch b/target/linux/brcm2708/patches-4.19/950-0562-drm-v3d-Clean-up-the-reservation-object-setup.patch deleted file mode 100644 index ec26c53997..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0562-drm-v3d-Clean-up-the-reservation-object-setup.patch +++ /dev/null @@ -1,102 +0,0 @@ -From 5ca5bd799b4f4a065b969461fa7852415bfb8c6f Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 8 Nov 2018 08:16:53 -0800 -Subject: [PATCH 562/806] drm/v3d: Clean up the reservation object setup. - -The extra to_v3d_bo() calls came from copying this from the vc4 -driver, which stored the cma gem object in the structs. - -v2: Fix an unused var warning - -Signed-off-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-4-eric@anholt.net -Reviewed-by: Boris Brezillon (v1) -(cherry picked from commit 8f1cd826641d677d0f7494253ecfc3335f0bcd4e) ---- - drivers/gpu/drm/v3d/v3d_gem.c | 33 +++++++++++---------------------- - 1 file changed, 11 insertions(+), 22 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -210,14 +210,11 @@ static void - v3d_attach_object_fences(struct v3d_exec_info *exec) - { - struct dma_fence *out_fence = exec->render_done_fence; -- struct v3d_bo *bo; - int i; - - for (i = 0; i < exec->bo_count; i++) { -- bo = to_v3d_bo(&exec->bo[i]->base); -- - /* XXX: Use shared fences for read-only objects. */ -- reservation_object_add_excl_fence(bo->resv, out_fence); -+ reservation_object_add_excl_fence(exec->bo[i]->resv, out_fence); - } - } - -@@ -228,11 +225,8 @@ v3d_unlock_bo_reservations(struct drm_de - { - int i; - -- for (i = 0; i < exec->bo_count; i++) { -- struct v3d_bo *bo = to_v3d_bo(&exec->bo[i]->base); -- -- ww_mutex_unlock(&bo->resv->lock); -- } -+ for (i = 0; i < exec->bo_count; i++) -+ ww_mutex_unlock(&exec->bo[i]->resv->lock); - - ww_acquire_fini(acquire_ctx); - } -@@ -251,13 +245,13 @@ v3d_lock_bo_reservations(struct drm_devi - { - int contended_lock = -1; - int i, ret; -- struct v3d_bo *bo; - - ww_acquire_init(acquire_ctx, &reservation_ww_class); - - retry: - if (contended_lock != -1) { -- bo = to_v3d_bo(&exec->bo[contended_lock]->base); -+ struct v3d_bo *bo = exec->bo[contended_lock]; -+ - ret = ww_mutex_lock_slow_interruptible(&bo->resv->lock, - acquire_ctx); - if (ret) { -@@ -270,19 +264,16 @@ retry: - if (i == contended_lock) - continue; - -- bo = to_v3d_bo(&exec->bo[i]->base); -- -- ret = ww_mutex_lock_interruptible(&bo->resv->lock, acquire_ctx); -+ ret = ww_mutex_lock_interruptible(&exec->bo[i]->resv->lock, -+ acquire_ctx); - if (ret) { - int j; - -- for (j = 0; j < i; j++) { -- bo = to_v3d_bo(&exec->bo[j]->base); -- ww_mutex_unlock(&bo->resv->lock); -- } -+ for (j = 0; j < i; j++) -+ ww_mutex_unlock(&exec->bo[j]->resv->lock); - - if (contended_lock != -1 && contended_lock >= i) { -- bo = to_v3d_bo(&exec->bo[contended_lock]->base); -+ struct v3d_bo *bo = exec->bo[contended_lock]; - - ww_mutex_unlock(&bo->resv->lock); - } -@@ -303,9 +294,7 @@ retry: - * before we commit the CL to the hardware. - */ - for (i = 0; i < exec->bo_count; i++) { -- bo = to_v3d_bo(&exec->bo[i]->base); -- -- ret = reservation_object_reserve_shared(bo->resv); -+ ret = reservation_object_reserve_shared(exec->bo[i]->resv); - if (ret) { - v3d_unlock_bo_reservations(dev, exec, acquire_ctx); - return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0563-drm-v3d-Add-support-for-submitting-jobs-to-the-TFU.patch b/target/linux/brcm2708/patches-4.19/950-0563-drm-v3d-Add-support-for-submitting-jobs-to-the-TFU.patch deleted file mode 100644 index 095a4c8962..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0563-drm-v3d-Add-support-for-submitting-jobs-to-the-TFU.patch +++ /dev/null @@ -1,802 +0,0 @@ -From ba1e90b6c3b3bf0e88ab01c824c4f8fde582e878 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 28 Nov 2018 15:09:25 -0800 -Subject: [PATCH 563/806] drm/v3d: Add support for submitting jobs to the TFU. - -The TFU can copy from raster, UIF, and SAND input images to UIF output -images, with optional mipmap generation. This will certainly be -useful for media EGL image input, but is also useful immediately for -mipmap generation without bogging the V3D core down. - -For now we only run the queue 1 job deep, and don't have any hang -recovery (though I don't think we should need it, with TFU). Queuing -multiple jobs in the HW will require synchronizing the YUV coefficient -regs updates since they don't get FIFOed with the job. - -v2: Change the ioctl to IOW instead of IOWR, always set COEF0, explain - why TFU is AUTH, clarify the syncing docs, drop the unused TFU - interrupt regs (you're expected to use the hub's), don't take - &bo->base for NULL bos. -v3: Fix a little whitespace alignment (noticed by checkpatch), rebase - on drm_sched_job_cleanup() changes. - -Signed-off-by: Eric Anholt -Reviewed-by: Dave Emett (v2) -Link: https://patchwork.freedesktop.org/patch/264607/ -(cherry picked from commit 1584f16ca96ef124aad79efa3303cff5f3530e2c) ---- - drivers/gpu/drm/v3d/v3d_drv.c | 15 ++- - drivers/gpu/drm/v3d/v3d_drv.h | 32 +++++- - drivers/gpu/drm/v3d/v3d_gem.c | 178 ++++++++++++++++++++++++++++---- - drivers/gpu/drm/v3d/v3d_irq.c | 12 ++- - drivers/gpu/drm/v3d/v3d_regs.h | 49 +++++++++ - drivers/gpu/drm/v3d/v3d_sched.c | 148 ++++++++++++++++++++++---- - drivers/gpu/drm/v3d/v3d_trace.h | 20 ++++ - include/uapi/drm/v3d_drm.h | 25 +++++ - 8 files changed, 426 insertions(+), 53 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_drv.c -+++ b/drivers/gpu/drm/v3d/v3d_drv.c -@@ -112,10 +112,15 @@ static int v3d_get_param_ioctl(struct dr - return 0; - } - -- /* Any params that aren't just register reads would go here. */ - -- DRM_DEBUG("Unknown parameter %d\n", args->param); -- return -EINVAL; -+ switch (args->param) { -+ case DRM_V3D_PARAM_SUPPORTS_TFU: -+ args->value = 1; -+ return 0; -+ default: -+ DRM_DEBUG("Unknown parameter %d\n", args->param); -+ return -EINVAL; -+ } - } - - static int -@@ -170,7 +175,8 @@ static const struct file_operations v3d_ - /* DRM_AUTH is required on SUBMIT_CL for now, while we don't have GMP - * protection between clients. Note that render nodes would be be - * able to submit CLs that could access BOs from clients authenticated -- * with the master node. -+ * with the master node. The TFU doesn't use the GMP, so it would -+ * need to stay DRM_AUTH until we do buffer size/offset validation. - */ - static const struct drm_ioctl_desc v3d_drm_ioctls[] = { - DRM_IOCTL_DEF_DRV(V3D_SUBMIT_CL, v3d_submit_cl_ioctl, DRM_RENDER_ALLOW | DRM_AUTH), -@@ -179,6 +185,7 @@ static const struct drm_ioctl_desc v3d_d - DRM_IOCTL_DEF_DRV(V3D_MMAP_BO, v3d_mmap_bo_ioctl, DRM_RENDER_ALLOW), - DRM_IOCTL_DEF_DRV(V3D_GET_PARAM, v3d_get_param_ioctl, DRM_RENDER_ALLOW), - DRM_IOCTL_DEF_DRV(V3D_GET_BO_OFFSET, v3d_get_bo_offset_ioctl, DRM_RENDER_ALLOW), -+ DRM_IOCTL_DEF_DRV(V3D_SUBMIT_TFU, v3d_submit_tfu_ioctl, DRM_RENDER_ALLOW | DRM_AUTH), - }; - - static const struct vm_operations_struct v3d_vm_ops = { ---- a/drivers/gpu/drm/v3d/v3d_drv.h -+++ b/drivers/gpu/drm/v3d/v3d_drv.h -@@ -7,19 +7,18 @@ - #include - #include - #include -+#include "uapi/drm/v3d_drm.h" - - #define GMP_GRANULARITY (128 * 1024) - --/* Enum for each of the V3D queues. We maintain various queue -- * tracking as an array because at some point we'll want to support -- * the TFU (texture formatting unit) as another queue. -- */ -+/* Enum for each of the V3D queues. */ - enum v3d_queue { - V3D_BIN, - V3D_RENDER, -+ V3D_TFU, - }; - --#define V3D_MAX_QUEUES (V3D_RENDER + 1) -+#define V3D_MAX_QUEUES (V3D_TFU + 1) - - struct v3d_queue_state { - struct drm_gpu_scheduler sched; -@@ -68,6 +67,7 @@ struct v3d_dev { - - struct v3d_exec_info *bin_job; - struct v3d_exec_info *render_job; -+ struct v3d_tfu_job *tfu_job; - - struct v3d_queue_state queue[V3D_MAX_QUEUES]; - -@@ -218,6 +218,25 @@ struct v3d_exec_info { - u32 qma, qms, qts; - }; - -+struct v3d_tfu_job { -+ struct drm_sched_job base; -+ -+ struct drm_v3d_submit_tfu args; -+ -+ /* An optional fence userspace can pass in for the job to depend on. */ -+ struct dma_fence *in_fence; -+ -+ /* v3d fence to be signaled by IRQ handler when the job is complete. */ -+ struct dma_fence *done_fence; -+ -+ struct v3d_dev *v3d; -+ -+ struct kref refcount; -+ -+ /* This is the array of BOs that were looked up at the start of exec. */ -+ struct v3d_bo *bo[4]; -+}; -+ - /** - * _wait_for - magic (register) wait macro - * -@@ -281,9 +300,12 @@ int v3d_gem_init(struct drm_device *dev) - void v3d_gem_destroy(struct drm_device *dev); - int v3d_submit_cl_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -+int v3d_submit_tfu_ioctl(struct drm_device *dev, void *data, -+ struct drm_file *file_priv); - int v3d_wait_bo_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); - void v3d_exec_put(struct v3d_exec_info *exec); -+void v3d_tfu_job_put(struct v3d_tfu_job *exec); - void v3d_reset(struct v3d_dev *v3d); - void v3d_invalidate_caches(struct v3d_dev *v3d); - void v3d_flush_caches(struct v3d_dev *v3d); ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -207,26 +207,27 @@ v3d_flush_caches(struct v3d_dev *v3d) - } - - static void --v3d_attach_object_fences(struct v3d_exec_info *exec) -+v3d_attach_object_fences(struct v3d_bo **bos, int bo_count, -+ struct dma_fence *fence) - { -- struct dma_fence *out_fence = exec->render_done_fence; - int i; - -- for (i = 0; i < exec->bo_count; i++) { -+ for (i = 0; i < bo_count; i++) { - /* XXX: Use shared fences for read-only objects. */ -- reservation_object_add_excl_fence(exec->bo[i]->resv, out_fence); -+ reservation_object_add_excl_fence(bos[i]->resv, fence); - } - } - - static void - v3d_unlock_bo_reservations(struct drm_device *dev, -- struct v3d_exec_info *exec, -+ struct v3d_bo **bos, -+ int bo_count, - struct ww_acquire_ctx *acquire_ctx) - { - int i; - -- for (i = 0; i < exec->bo_count; i++) -- ww_mutex_unlock(&exec->bo[i]->resv->lock); -+ for (i = 0; i < bo_count; i++) -+ ww_mutex_unlock(&bos[i]->resv->lock); - - ww_acquire_fini(acquire_ctx); - } -@@ -240,7 +241,8 @@ v3d_unlock_bo_reservations(struct drm_de - */ - static int - v3d_lock_bo_reservations(struct drm_device *dev, -- struct v3d_exec_info *exec, -+ struct v3d_bo **bos, -+ int bo_count, - struct ww_acquire_ctx *acquire_ctx) - { - int contended_lock = -1; -@@ -250,7 +252,7 @@ v3d_lock_bo_reservations(struct drm_devi - - retry: - if (contended_lock != -1) { -- struct v3d_bo *bo = exec->bo[contended_lock]; -+ struct v3d_bo *bo = bos[contended_lock]; - - ret = ww_mutex_lock_slow_interruptible(&bo->resv->lock, - acquire_ctx); -@@ -260,20 +262,20 @@ retry: - } - } - -- for (i = 0; i < exec->bo_count; i++) { -+ for (i = 0; i < bo_count; i++) { - if (i == contended_lock) - continue; - -- ret = ww_mutex_lock_interruptible(&exec->bo[i]->resv->lock, -+ ret = ww_mutex_lock_interruptible(&bos[i]->resv->lock, - acquire_ctx); - if (ret) { - int j; - - for (j = 0; j < i; j++) -- ww_mutex_unlock(&exec->bo[j]->resv->lock); -+ ww_mutex_unlock(&bos[j]->resv->lock); - - if (contended_lock != -1 && contended_lock >= i) { -- struct v3d_bo *bo = exec->bo[contended_lock]; -+ struct v3d_bo *bo = bos[contended_lock]; - - ww_mutex_unlock(&bo->resv->lock); - } -@@ -293,10 +295,11 @@ retry: - /* Reserve space for our shared (read-only) fence references, - * before we commit the CL to the hardware. - */ -- for (i = 0; i < exec->bo_count; i++) { -- ret = reservation_object_reserve_shared(exec->bo[i]->resv); -+ for (i = 0; i < bo_count; i++) { -+ ret = reservation_object_reserve_shared(bos[i]->resv); - if (ret) { -- v3d_unlock_bo_reservations(dev, exec, acquire_ctx); -+ v3d_unlock_bo_reservations(dev, bos, bo_count, -+ acquire_ctx); - return ret; - } - } -@@ -419,6 +422,33 @@ void v3d_exec_put(struct v3d_exec_info * - kref_put(&exec->refcount, v3d_exec_cleanup); - } - -+static void -+v3d_tfu_job_cleanup(struct kref *ref) -+{ -+ struct v3d_tfu_job *job = container_of(ref, struct v3d_tfu_job, -+ refcount); -+ struct v3d_dev *v3d = job->v3d; -+ unsigned int i; -+ -+ dma_fence_put(job->in_fence); -+ dma_fence_put(job->done_fence); -+ -+ for (i = 0; i < ARRAY_SIZE(job->bo); i++) { -+ if (job->bo[i]) -+ drm_gem_object_put_unlocked(&job->bo[i]->base); -+ } -+ -+ pm_runtime_mark_last_busy(v3d->dev); -+ pm_runtime_put_autosuspend(v3d->dev); -+ -+ kfree(job); -+} -+ -+void v3d_tfu_job_put(struct v3d_tfu_job *job) -+{ -+ kref_put(&job->refcount, v3d_tfu_job_cleanup); -+} -+ - int - v3d_wait_bo_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -@@ -536,7 +566,8 @@ v3d_submit_cl_ioctl(struct drm_device *d - if (ret) - goto fail; - -- ret = v3d_lock_bo_reservations(dev, exec, &acquire_ctx); -+ ret = v3d_lock_bo_reservations(dev, exec->bo, exec->bo_count, -+ &acquire_ctx); - if (ret) - goto fail; - -@@ -570,9 +601,10 @@ v3d_submit_cl_ioctl(struct drm_device *d - &v3d_priv->sched_entity[V3D_RENDER]); - mutex_unlock(&v3d->sched_lock); - -- v3d_attach_object_fences(exec); -+ v3d_attach_object_fences(exec->bo, exec->bo_count, -+ exec->render_done_fence); - -- v3d_unlock_bo_reservations(dev, exec, &acquire_ctx); -+ v3d_unlock_bo_reservations(dev, exec->bo, exec->bo_count, &acquire_ctx); - - /* Update the return sync object for the */ - sync_out = drm_syncobj_find(file_priv, args->out_sync); -@@ -588,12 +620,118 @@ v3d_submit_cl_ioctl(struct drm_device *d - - fail_unreserve: - mutex_unlock(&v3d->sched_lock); -- v3d_unlock_bo_reservations(dev, exec, &acquire_ctx); -+ v3d_unlock_bo_reservations(dev, exec->bo, exec->bo_count, &acquire_ctx); - fail: - v3d_exec_put(exec); - - return ret; - } -+ -+/** -+ * v3d_submit_tfu_ioctl() - Submits a TFU (texture formatting) job to the V3D. -+ * @dev: DRM device -+ * @data: ioctl argument -+ * @file_priv: DRM file for this fd -+ * -+ * Userspace provides the register setup for the TFU, which we don't -+ * need to validate since the TFU is behind the MMU. -+ */ -+int -+v3d_submit_tfu_ioctl(struct drm_device *dev, void *data, -+ struct drm_file *file_priv) -+{ -+ struct v3d_dev *v3d = to_v3d_dev(dev); -+ struct v3d_file_priv *v3d_priv = file_priv->driver_priv; -+ struct drm_v3d_submit_tfu *args = data; -+ struct v3d_tfu_job *job; -+ struct ww_acquire_ctx acquire_ctx; -+ struct drm_syncobj *sync_out; -+ struct dma_fence *sched_done_fence; -+ int ret = 0; -+ int bo_count; -+ -+ job = kcalloc(1, sizeof(*job), GFP_KERNEL); -+ if (!job) -+ return -ENOMEM; -+ -+ ret = pm_runtime_get_sync(v3d->dev); -+ if (ret < 0) { -+ kfree(job); -+ return ret; -+ } -+ -+ kref_init(&job->refcount); -+ -+ ret = drm_syncobj_find_fence(file_priv, args->in_sync, -+ 0, &job->in_fence); -+ if (ret == -EINVAL) -+ goto fail; -+ -+ job->args = *args; -+ job->v3d = v3d; -+ -+ spin_lock(&file_priv->table_lock); -+ for (bo_count = 0; bo_count < ARRAY_SIZE(job->bo); bo_count++) { -+ struct drm_gem_object *bo; -+ -+ if (!args->bo_handles[bo_count]) -+ break; -+ -+ bo = idr_find(&file_priv->object_idr, -+ args->bo_handles[bo_count]); -+ if (!bo) { -+ DRM_DEBUG("Failed to look up GEM BO %d: %d\n", -+ bo_count, args->bo_handles[bo_count]); -+ ret = -ENOENT; -+ spin_unlock(&file_priv->table_lock); -+ goto fail; -+ } -+ drm_gem_object_get(bo); -+ job->bo[bo_count] = to_v3d_bo(bo); -+ } -+ spin_unlock(&file_priv->table_lock); -+ -+ ret = v3d_lock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); -+ if (ret) -+ goto fail; -+ -+ mutex_lock(&v3d->sched_lock); -+ ret = drm_sched_job_init(&job->base, -+ &v3d_priv->sched_entity[V3D_TFU], -+ v3d_priv); -+ if (ret) -+ goto fail_unreserve; -+ -+ sched_done_fence = dma_fence_get(&job->base.s_fence->finished); -+ -+ kref_get(&job->refcount); /* put by scheduler job completion */ -+ drm_sched_entity_push_job(&job->base, &v3d_priv->sched_entity[V3D_TFU]); -+ mutex_unlock(&v3d->sched_lock); -+ -+ v3d_attach_object_fences(job->bo, bo_count, sched_done_fence); -+ -+ v3d_unlock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); -+ -+ /* Update the return sync object */ -+ sync_out = drm_syncobj_find(file_priv, args->out_sync); -+ if (sync_out) { -+ drm_syncobj_replace_fence(sync_out, sched_done_fence); -+ drm_syncobj_put(sync_out); -+ } -+ dma_fence_put(sched_done_fence); -+ -+ v3d_tfu_job_put(job); -+ -+ return 0; -+ -+fail_unreserve: -+ mutex_unlock(&v3d->sched_lock); -+ v3d_unlock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); -+fail: -+ v3d_tfu_job_put(job); -+ -+ return ret; -+} - - int - v3d_gem_init(struct drm_device *dev) ---- a/drivers/gpu/drm/v3d/v3d_irq.c -+++ b/drivers/gpu/drm/v3d/v3d_irq.c -@@ -4,8 +4,8 @@ - /** - * DOC: Interrupt management for the V3D engine - * -- * When we take a binning or rendering flush done interrupt, we need -- * to signal the fence for that job so that the scheduler can queue up -+ * When we take a bin, render, or TFU done interrupt, we need to -+ * signal the fence for that job so that the scheduler can queue up - * the next one and unblock any waiters. - * - * When we take the binner out of memory interrupt, we need to -@@ -23,7 +23,8 @@ - - #define V3D_HUB_IRQS ((u32)(V3D_HUB_INT_MMU_WRV | \ - V3D_HUB_INT_MMU_PTI | \ -- V3D_HUB_INT_MMU_CAP)) -+ V3D_HUB_INT_MMU_CAP | \ -+ V3D_HUB_INT_TFUC)) - - static void - v3d_overflow_mem_work(struct work_struct *work) -@@ -117,6 +118,11 @@ v3d_hub_irq(int irq, void *arg) - /* Acknowledge the interrupts we're handling here. */ - V3D_WRITE(V3D_HUB_INT_CLR, intsts); - -+ if (intsts & V3D_HUB_INT_TFUC) { -+ dma_fence_signal(v3d->tfu_job->done_fence); -+ status = IRQ_HANDLED; -+ } -+ - if (intsts & (V3D_HUB_INT_MMU_WRV | - V3D_HUB_INT_MMU_PTI | - V3D_HUB_INT_MMU_CAP)) { ---- a/drivers/gpu/drm/v3d/v3d_regs.h -+++ b/drivers/gpu/drm/v3d/v3d_regs.h -@@ -86,6 +86,55 @@ - # define V3D_TOP_GR_BRIDGE_SW_INIT_1 0x0000c - # define V3D_TOP_GR_BRIDGE_SW_INIT_1_V3D_CLK_108_SW_INIT BIT(0) - -+#define V3D_TFU_CS 0x00400 -+/* Stops current job, empties input fifo. */ -+# define V3D_TFU_CS_TFURST BIT(31) -+# define V3D_TFU_CS_CVTCT_MASK V3D_MASK(23, 16) -+# define V3D_TFU_CS_CVTCT_SHIFT 16 -+# define V3D_TFU_CS_NFREE_MASK V3D_MASK(13, 8) -+# define V3D_TFU_CS_NFREE_SHIFT 8 -+# define V3D_TFU_CS_BUSY BIT(0) -+ -+#define V3D_TFU_SU 0x00404 -+/* Interrupt when FINTTHR input slots are free (0 = disabled) */ -+# define V3D_TFU_SU_FINTTHR_MASK V3D_MASK(13, 8) -+# define V3D_TFU_SU_FINTTHR_SHIFT 8 -+/* Skips resetting the CRC at the start of CRC generation. */ -+# define V3D_TFU_SU_CRCCHAIN BIT(4) -+/* skips writes, computes CRC of the image. miplevels must be 0. */ -+# define V3D_TFU_SU_CRC BIT(3) -+# define V3D_TFU_SU_THROTTLE_MASK V3D_MASK(1, 0) -+# define V3D_TFU_SU_THROTTLE_SHIFT 0 -+ -+#define V3D_TFU_ICFG 0x00408 -+/* Interrupt when the conversion is complete. */ -+# define V3D_TFU_ICFG_IOC BIT(0) -+ -+/* Input Image Address */ -+#define V3D_TFU_IIA 0x0040c -+/* Input Chroma Address */ -+#define V3D_TFU_ICA 0x00410 -+/* Input Image Stride */ -+#define V3D_TFU_IIS 0x00414 -+/* Input Image U-Plane Address */ -+#define V3D_TFU_IUA 0x00418 -+/* Output Image Address */ -+#define V3D_TFU_IOA 0x0041c -+/* Image Output Size */ -+#define V3D_TFU_IOS 0x00420 -+/* TFU YUV Coefficient 0 */ -+#define V3D_TFU_COEF0 0x00424 -+/* Use these regs instead of the defaults. */ -+# define V3D_TFU_COEF0_USECOEF BIT(31) -+/* TFU YUV Coefficient 1 */ -+#define V3D_TFU_COEF1 0x00428 -+/* TFU YUV Coefficient 2 */ -+#define V3D_TFU_COEF2 0x0042c -+/* TFU YUV Coefficient 3 */ -+#define V3D_TFU_COEF3 0x00430 -+ -+#define V3D_TFU_CRC 0x00434 -+ - /* Per-MMU registers. */ - - #define V3D_MMUC_CONTROL 0x01000 ---- a/drivers/gpu/drm/v3d/v3d_sched.c -+++ b/drivers/gpu/drm/v3d/v3d_sched.c -@@ -30,6 +30,12 @@ to_v3d_job(struct drm_sched_job *sched_j - return container_of(sched_job, struct v3d_job, base); - } - -+static struct v3d_tfu_job * -+to_tfu_job(struct drm_sched_job *sched_job) -+{ -+ return container_of(sched_job, struct v3d_tfu_job, base); -+} -+ - static void - v3d_job_free(struct drm_sched_job *sched_job) - { -@@ -38,6 +44,14 @@ v3d_job_free(struct drm_sched_job *sched - v3d_exec_put(job->exec); - } - -+static void -+v3d_tfu_job_free(struct drm_sched_job *sched_job) -+{ -+ struct v3d_tfu_job *job = to_tfu_job(sched_job); -+ -+ v3d_tfu_job_put(job); -+} -+ - /** - * Returns the fences that the bin or render job depends on, one by one. - * v3d_job_run() won't be called until all of them have been signaled. -@@ -76,6 +90,27 @@ v3d_job_dependency(struct drm_sched_job - return fence; - } - -+/** -+ * Returns the fences that the TFU job depends on, one by one. -+ * v3d_tfu_job_run() won't be called until all of them have been -+ * signaled. -+ */ -+static struct dma_fence * -+v3d_tfu_job_dependency(struct drm_sched_job *sched_job, -+ struct drm_sched_entity *s_entity) -+{ -+ struct v3d_tfu_job *job = to_tfu_job(sched_job); -+ struct dma_fence *fence; -+ -+ fence = job->in_fence; -+ if (fence) { -+ job->in_fence = NULL; -+ return fence; -+ } -+ -+ return NULL; -+} -+ - static struct dma_fence *v3d_job_run(struct drm_sched_job *sched_job) - { - struct v3d_job *job = to_v3d_job(sched_job); -@@ -147,31 +182,47 @@ static struct dma_fence *v3d_job_run(str - return fence; - } - --static void --v3d_job_timedout(struct drm_sched_job *sched_job) -+static struct dma_fence * -+v3d_tfu_job_run(struct drm_sched_job *sched_job) - { -- struct v3d_job *job = to_v3d_job(sched_job); -- struct v3d_exec_info *exec = job->exec; -- struct v3d_dev *v3d = exec->v3d; -- enum v3d_queue job_q = job == &exec->bin ? V3D_BIN : V3D_RENDER; -- enum v3d_queue q; -- u32 ctca = V3D_CORE_READ(0, V3D_CLE_CTNCA(job_q)); -- u32 ctra = V3D_CORE_READ(0, V3D_CLE_CTNRA(job_q)); -+ struct v3d_tfu_job *job = to_tfu_job(sched_job); -+ struct v3d_dev *v3d = job->v3d; -+ struct drm_device *dev = &v3d->drm; -+ struct dma_fence *fence; - -- /* If the current address or return address have changed, then -- * the GPU has probably made progress and we should delay the -- * reset. This could fail if the GPU got in an infinite loop -- * in the CL, but that is pretty unlikely outside of an i-g-t -- * testcase. -- */ -- if (job->timedout_ctca != ctca || job->timedout_ctra != ctra) { -- job->timedout_ctca = ctca; -- job->timedout_ctra = ctra; -+ fence = v3d_fence_create(v3d, V3D_TFU); -+ if (IS_ERR(fence)) -+ return NULL; - -- schedule_delayed_work(&job->base.work_tdr, -- job->base.sched->timeout); -- return; -+ v3d->tfu_job = job; -+ if (job->done_fence) -+ dma_fence_put(job->done_fence); -+ job->done_fence = dma_fence_get(fence); -+ -+ trace_v3d_submit_tfu(dev, to_v3d_fence(fence)->seqno); -+ -+ V3D_WRITE(V3D_TFU_IIA, job->args.iia); -+ V3D_WRITE(V3D_TFU_IIS, job->args.iis); -+ V3D_WRITE(V3D_TFU_ICA, job->args.ica); -+ V3D_WRITE(V3D_TFU_IUA, job->args.iua); -+ V3D_WRITE(V3D_TFU_IOA, job->args.ioa); -+ V3D_WRITE(V3D_TFU_IOS, job->args.ios); -+ V3D_WRITE(V3D_TFU_COEF0, job->args.coef[0]); -+ if (job->args.coef[0] & V3D_TFU_COEF0_USECOEF) { -+ V3D_WRITE(V3D_TFU_COEF1, job->args.coef[1]); -+ V3D_WRITE(V3D_TFU_COEF2, job->args.coef[2]); -+ V3D_WRITE(V3D_TFU_COEF3, job->args.coef[3]); - } -+ /* ICFG kicks off the job. */ -+ V3D_WRITE(V3D_TFU_ICFG, job->args.icfg | V3D_TFU_ICFG_IOC); -+ -+ return fence; -+} -+ -+static void -+v3d_gpu_reset_for_timeout(struct v3d_dev *v3d, struct drm_sched_job *sched_job) -+{ -+ enum v3d_queue q; - - mutex_lock(&v3d->reset_lock); - -@@ -196,6 +247,41 @@ v3d_job_timedout(struct drm_sched_job *s - mutex_unlock(&v3d->reset_lock); - } - -+static void -+v3d_job_timedout(struct drm_sched_job *sched_job) -+{ -+ struct v3d_job *job = to_v3d_job(sched_job); -+ struct v3d_exec_info *exec = job->exec; -+ struct v3d_dev *v3d = exec->v3d; -+ enum v3d_queue job_q = job == &exec->bin ? V3D_BIN : V3D_RENDER; -+ u32 ctca = V3D_CORE_READ(0, V3D_CLE_CTNCA(job_q)); -+ u32 ctra = V3D_CORE_READ(0, V3D_CLE_CTNRA(job_q)); -+ -+ /* If the current address or return address have changed, then -+ * the GPU has probably made progress and we should delay the -+ * reset. This could fail if the GPU got in an infinite loop -+ * in the CL, but that is pretty unlikely outside of an i-g-t -+ * testcase. -+ */ -+ if (job->timedout_ctca != ctca || job->timedout_ctra != ctra) { -+ job->timedout_ctca = ctca; -+ job->timedout_ctra = ctra; -+ schedule_delayed_work(&job->base.work_tdr, -+ job->base.sched->timeout); -+ return; -+ } -+ -+ v3d_gpu_reset_for_timeout(v3d, sched_job); -+} -+ -+static void -+v3d_tfu_job_timedout(struct drm_sched_job *sched_job) -+{ -+ struct v3d_tfu_job *job = to_tfu_job(sched_job); -+ -+ v3d_gpu_reset_for_timeout(job->v3d, sched_job); -+} -+ - static const struct drm_sched_backend_ops v3d_sched_ops = { - .dependency = v3d_job_dependency, - .run_job = v3d_job_run, -@@ -203,6 +289,13 @@ static const struct drm_sched_backend_op - .free_job = v3d_job_free - }; - -+static const struct drm_sched_backend_ops v3d_tfu_sched_ops = { -+ .dependency = v3d_tfu_job_dependency, -+ .run_job = v3d_tfu_job_run, -+ .timedout_job = v3d_tfu_job_timedout, -+ .free_job = v3d_tfu_job_free -+}; -+ - int - v3d_sched_init(struct v3d_dev *v3d) - { -@@ -232,6 +325,19 @@ v3d_sched_init(struct v3d_dev *v3d) - drm_sched_fini(&v3d->queue[V3D_BIN].sched); - return ret; - } -+ -+ ret = drm_sched_init(&v3d->queue[V3D_TFU].sched, -+ &v3d_tfu_sched_ops, -+ hw_jobs_limit, job_hang_limit, -+ msecs_to_jiffies(hang_limit_ms), -+ "v3d_tfu"); -+ if (ret) { -+ dev_err(v3d->dev, "Failed to create TFU scheduler: %d.", -+ ret); -+ drm_sched_fini(&v3d->queue[V3D_RENDER].sched); -+ drm_sched_fini(&v3d->queue[V3D_BIN].sched); -+ return ret; -+ } - - return 0; - } ---- a/drivers/gpu/drm/v3d/v3d_trace.h -+++ b/drivers/gpu/drm/v3d/v3d_trace.h -@@ -42,6 +42,26 @@ TRACE_EVENT(v3d_submit_cl, - __entry->ctnqea) - ); - -+TRACE_EVENT(v3d_submit_tfu, -+ TP_PROTO(struct drm_device *dev, -+ uint64_t seqno), -+ TP_ARGS(dev, seqno), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ __field(u64, seqno) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ __entry->seqno = seqno; -+ ), -+ -+ TP_printk("dev=%u, seqno=%llu", -+ __entry->dev, -+ __entry->seqno) -+); -+ - TRACE_EVENT(v3d_reset_begin, - TP_PROTO(struct drm_device *dev), - TP_ARGS(dev), ---- a/include/uapi/drm/v3d_drm.h -+++ b/include/uapi/drm/v3d_drm.h -@@ -36,6 +36,7 @@ extern "C" { - #define DRM_V3D_MMAP_BO 0x03 - #define DRM_V3D_GET_PARAM 0x04 - #define DRM_V3D_GET_BO_OFFSET 0x05 -+#define DRM_V3D_SUBMIT_TFU 0x06 - - #define DRM_IOCTL_V3D_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl) - #define DRM_IOCTL_V3D_WAIT_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo) -@@ -43,6 +44,7 @@ extern "C" { - #define DRM_IOCTL_V3D_MMAP_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_MMAP_BO, struct drm_v3d_mmap_bo) - #define DRM_IOCTL_V3D_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_PARAM, struct drm_v3d_get_param) - #define DRM_IOCTL_V3D_GET_BO_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_BO_OFFSET, struct drm_v3d_get_bo_offset) -+#define DRM_IOCTL_V3D_SUBMIT_TFU DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_TFU, struct drm_v3d_submit_tfu) - - /** - * struct drm_v3d_submit_cl - ioctl argument for submitting commands to the 3D -@@ -169,6 +171,7 @@ enum drm_v3d_param { - DRM_V3D_PARAM_V3D_CORE0_IDENT0, - DRM_V3D_PARAM_V3D_CORE0_IDENT1, - DRM_V3D_PARAM_V3D_CORE0_IDENT2, -+ DRM_V3D_PARAM_SUPPORTS_TFU, - }; - - struct drm_v3d_get_param { -@@ -187,6 +190,28 @@ struct drm_v3d_get_bo_offset { - __u32 offset; - }; - -+struct drm_v3d_submit_tfu { -+ __u32 icfg; -+ __u32 iia; -+ __u32 iis; -+ __u32 ica; -+ __u32 iua; -+ __u32 ioa; -+ __u32 ios; -+ __u32 coef[4]; -+ /* First handle is the output BO, following are other inputs. -+ * 0 for unused. -+ */ -+ __u32 bo_handles[4]; -+ /* sync object to block on before running the TFU job. Each TFU -+ * job will execute in the order submitted to its FD. Synchronization -+ * against rendering jobs requires using sync objects. -+ */ -+ __u32 in_sync; -+ /* Sync object to signal when the TFU job is done. */ -+ __u32 out_sync; -+}; -+ - #if defined(__cplusplus) - } - #endif diff --git a/target/linux/brcm2708/patches-4.19/950-0563-drm-v3d-Clock-V3D-down-when-not-in-use.patch b/target/linux/brcm2708/patches-4.19/950-0563-drm-v3d-Clock-V3D-down-when-not-in-use.patch new file mode 100644 index 0000000000..b4c2c3b5e2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0563-drm-v3d-Clock-V3D-down-when-not-in-use.patch @@ -0,0 +1,157 @@ +From 3e6b687bae81bdf5a430ffaa04aa04ee195a866c Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 2 May 2019 13:22:53 -0700 +Subject: [PATCH] drm/v3d: Clock V3D down when not in use. + +My various attempts at re-enabling runtime PM have failed, so just +crank the clock down when V3D is idle to reduce power consumption. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/v3d/v3d_drv.c | 18 +++++++++++++ + drivers/gpu/drm/v3d/v3d_drv.h | 6 +++++ + drivers/gpu/drm/v3d/v3d_gem.c | 49 +++++++++++++++++++++++++++++++++++ + 3 files changed, 73 insertions(+) + +--- a/drivers/gpu/drm/v3d/v3d_drv.c ++++ b/drivers/gpu/drm/v3d/v3d_drv.c +@@ -297,6 +297,21 @@ static int v3d_platform_drm_probe(struct + } + } + ++ v3d->clk = devm_clk_get(dev, NULL); ++ if (IS_ERR(v3d->clk)) { ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Failed to get clock\n"); ++ goto dev_free; ++ } ++ v3d->clk_up_rate = clk_get_rate(v3d->clk); ++ /* For downclocking, drop it to the minimum frequency we can get from ++ * the CPRMAN clock generator dividing off our parent. The divider is ++ * 4 bits, but ask for just higher than that so that rounding doesn't ++ * make cprman reject our rate. ++ */ ++ v3d->clk_down_rate = ++ (clk_get_rate(clk_get_parent(v3d->clk)) / (1 << 4)) + 10000; ++ + if (v3d->ver < 41) { + ret = map_regs(v3d, &v3d->gca_regs, "gca"); + if (ret) +@@ -331,6 +346,9 @@ static int v3d_platform_drm_probe(struct + if (ret) + goto irq_disable; + ++ ret = clk_set_rate(v3d->clk, v3d->clk_down_rate); ++ WARN_ON_ONCE(ret != 0); ++ + return 0; + + irq_disable: +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -45,6 +45,12 @@ struct v3d_dev { + void __iomem *bridge_regs; + void __iomem *gca_regs; + struct clk *clk; ++ struct delayed_work clk_down_work; ++ unsigned long clk_up_rate, clk_down_rate; ++ struct mutex clk_lock; ++ u32 clk_refcount; ++ bool clk_up; ++ + struct reset_control *reset; + + /* Virtual and DMA addresses of the single shared page table. */ +--- a/drivers/gpu/drm/v3d/v3d_gem.c ++++ b/drivers/gpu/drm/v3d/v3d_gem.c +@@ -3,6 +3,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -17,6 +18,47 @@ + #include "v3d_trace.h" + + static void ++v3d_clock_down_work(struct work_struct *work) ++{ ++ struct v3d_dev *v3d = ++ container_of(work, struct v3d_dev, clk_down_work.work); ++ int ret; ++ ++ ret = clk_set_rate(v3d->clk, v3d->clk_down_rate); ++ v3d->clk_up = false; ++ WARN_ON_ONCE(ret != 0); ++} ++ ++static void ++v3d_clock_up_get(struct v3d_dev *v3d) ++{ ++ mutex_lock(&v3d->clk_lock); ++ if (v3d->clk_refcount++ == 0) { ++ cancel_delayed_work_sync(&v3d->clk_down_work); ++ if (!v3d->clk_up) { ++ int ret; ++ ++ ret = clk_set_rate(v3d->clk, v3d->clk_up_rate); ++ WARN_ON_ONCE(ret != 0); ++ v3d->clk_up = true; ++ } ++ } ++ mutex_unlock(&v3d->clk_lock); ++} ++ ++static void ++v3d_clock_up_put(struct v3d_dev *v3d) ++{ ++ mutex_lock(&v3d->clk_lock); ++ if (--v3d->clk_refcount == 0) { ++ schedule_delayed_work(&v3d->clk_down_work, ++ msecs_to_jiffies(100)); ++ } ++ mutex_unlock(&v3d->clk_lock); ++} ++ ++ ++static void + v3d_init_core(struct v3d_dev *v3d, int core) + { + /* Set OVRTMUOUT, which means that the texture sampler uniform +@@ -490,6 +532,7 @@ static void + v3d_job_free(struct kref *ref) + { + struct v3d_job *job = container_of(ref, struct v3d_job, refcount); ++ struct v3d_dev *v3d = job->v3d; + int i; + + for (i = 0; i < job->bo_count; i++) { +@@ -505,6 +548,8 @@ v3d_job_free(struct kref *ref) + dma_fence_put(job->irq_fence); + dma_fence_put(job->done_fence); + ++ v3d_clock_up_put(v3d); ++ + kfree(job); + } + +@@ -596,6 +641,7 @@ v3d_job_init(struct v3d_dev *v3d, struct + if (ret) + return ret; + ++ v3d_clock_up_get(v3d); + kref_init(&job->refcount); + + return 0; +@@ -963,6 +1009,9 @@ v3d_gem_init(struct drm_device *dev) + mutex_init(&v3d->sched_lock); + mutex_init(&v3d->cache_clean_lock); + ++ mutex_init(&v3d->clk_lock); ++ INIT_DELAYED_WORK(&v3d->clk_down_work, v3d_clock_down_work); ++ + /* Note: We don't allocate address 0. Various bits of HW + * treat 0 as special, such as the occlusion query counters + * where 0 means "disabled". diff --git a/target/linux/brcm2708/patches-4.19/950-0564-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch b/target/linux/brcm2708/patches-4.19/950-0564-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch new file mode 100644 index 0000000000..3a9fa5e715 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0564-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch @@ -0,0 +1,72 @@ +From e5cefebc24b7684f4f84a539259612c8f5a4975b Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Thu, 2 May 2019 23:42:29 +0200 +Subject: [PATCH] HACK: clk-bcm2835: Add BCM2838_CLOCK_EMMC2 support + +The new BCM2838 supports an additional emmc2 clock. So add a new +compatible to register this clock only for BCM2838. + +Signed-off-by: Stefan Wahren +--- + drivers/clk/bcm/clk-bcm2835.c | 20 ++++++++++++++++++-- + include/dt-bindings/clock/bcm2835.h | 2 ++ + 2 files changed, 20 insertions(+), 2 deletions(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -124,6 +124,8 @@ + #define CM_AVEODIV 0x1bc + #define CM_EMMCCTL 0x1c0 + #define CM_EMMCDIV 0x1c4 ++#define CM_EMMC2CTL 0x1d0 ++#define CM_EMMC2DIV 0x1d4 + + /* General bits for the CM_*CTL regs */ + # define CM_ENABLE BIT(4) +@@ -2047,6 +2049,15 @@ static const struct bcm2835_clk_desc clk + .frac_bits = 8, + .tcnt_mux = 39), + ++ /* EMMC2 clock (only available for BCM2838) */ ++ [BCM2838_CLOCK_EMMC2] = REGISTER_PER_CLK( ++ .name = "emmc2", ++ .ctl_reg = CM_EMMC2CTL, ++ .div_reg = CM_EMMC2DIV, ++ .int_bits = 4, ++ .frac_bits = 8, ++ .tcnt_mux = 42), ++ + /* General purpose (GPIO) clocks */ + [BCM2835_CLOCK_GP0] = REGISTER_PER_CLK( + .name = "gp0", +@@ -2276,8 +2287,12 @@ static int bcm2835_clk_probe(struct plat + + for (i = 0; i < asize; i++) { + desc = &clk_desc_array[i]; +- if (desc->clk_register && desc->data) +- hws[i] = desc->clk_register(cprman, desc->data); ++ if (desc->clk_register && desc->data) { ++ if ((i != BCM2838_CLOCK_EMMC2) || ++ of_device_is_compatible(fw_node, "brcm,bcm2838-cprman")) { ++ hws[i] = desc->clk_register(cprman, desc->data); ++ } ++ } + } + + ret = bcm2835_mark_sdc_parent_critical(hws[BCM2835_CLOCK_SDRAM]->clk); +@@ -2297,6 +2312,7 @@ static int bcm2835_clk_probe(struct plat + + static const struct of_device_id bcm2835_clk_of_match[] = { + { .compatible = "brcm,bcm2835-cprman", }, ++ { .compatible = "brcm,bcm2838-cprman", }, + {} + }; + MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match); +--- a/include/dt-bindings/clock/bcm2835.h ++++ b/include/dt-bindings/clock/bcm2835.h +@@ -66,3 +66,5 @@ + #define BCM2835_CLOCK_DSI1E 48 + #define BCM2835_CLOCK_DSI0P 49 + #define BCM2835_CLOCK_DSI1P 50 ++ ++#define BCM2838_CLOCK_EMMC2 51 diff --git a/target/linux/brcm2708/patches-4.19/950-0564-drm-v3d-Drop-the-dev-argument-to-lock-unlock-of-BO-r.patch b/target/linux/brcm2708/patches-4.19/950-0564-drm-v3d-Drop-the-dev-argument-to-lock-unlock-of-BO-r.patch deleted file mode 100644 index 83ee5e3cae..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0564-drm-v3d-Drop-the-dev-argument-to-lock-unlock-of-BO-r.patch +++ /dev/null @@ -1,102 +0,0 @@ -From c95a4208ef87c56349d35480e68304562c7612bd Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 28 Nov 2018 15:09:26 -0800 -Subject: [PATCH 564/806] drm/v3d: Drop the "dev" argument to lock/unlock of BO - reservations. - -They were unused, as Dave Emett noticed in TFU review. - -Signed-off-by: Eric Anholt -Cc: Dave Emett -Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-2-eric@anholt.net -Reviewed-by: Daniel Vetter -(cherry picked from commit e14a07fc4b961a75f6c275d6bd670ba54fbdae14) ---- - drivers/gpu/drm/v3d/v3d_gem.c | 20 +++++++++----------- - 1 file changed, 9 insertions(+), 11 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -219,8 +219,7 @@ v3d_attach_object_fences(struct v3d_bo * - } - - static void --v3d_unlock_bo_reservations(struct drm_device *dev, -- struct v3d_bo **bos, -+v3d_unlock_bo_reservations(struct v3d_bo **bos, - int bo_count, - struct ww_acquire_ctx *acquire_ctx) - { -@@ -240,8 +239,7 @@ v3d_unlock_bo_reservations(struct drm_de - * to v3d, so we don't attach dma-buf fences to them. - */ - static int --v3d_lock_bo_reservations(struct drm_device *dev, -- struct v3d_bo **bos, -+v3d_lock_bo_reservations(struct v3d_bo **bos, - int bo_count, - struct ww_acquire_ctx *acquire_ctx) - { -@@ -298,7 +296,7 @@ retry: - for (i = 0; i < bo_count; i++) { - ret = reservation_object_reserve_shared(bos[i]->resv); - if (ret) { -- v3d_unlock_bo_reservations(dev, bos, bo_count, -+ v3d_unlock_bo_reservations(bos, bo_count, - acquire_ctx); - return ret; - } -@@ -566,7 +564,7 @@ v3d_submit_cl_ioctl(struct drm_device *d - if (ret) - goto fail; - -- ret = v3d_lock_bo_reservations(dev, exec->bo, exec->bo_count, -+ ret = v3d_lock_bo_reservations(exec->bo, exec->bo_count, - &acquire_ctx); - if (ret) - goto fail; -@@ -604,7 +602,7 @@ v3d_submit_cl_ioctl(struct drm_device *d - v3d_attach_object_fences(exec->bo, exec->bo_count, - exec->render_done_fence); - -- v3d_unlock_bo_reservations(dev, exec->bo, exec->bo_count, &acquire_ctx); -+ v3d_unlock_bo_reservations(exec->bo, exec->bo_count, &acquire_ctx); - - /* Update the return sync object for the */ - sync_out = drm_syncobj_find(file_priv, args->out_sync); -@@ -620,7 +618,7 @@ v3d_submit_cl_ioctl(struct drm_device *d - - fail_unreserve: - mutex_unlock(&v3d->sched_lock); -- v3d_unlock_bo_reservations(dev, exec->bo, exec->bo_count, &acquire_ctx); -+ v3d_unlock_bo_reservations(exec->bo, exec->bo_count, &acquire_ctx); - fail: - v3d_exec_put(exec); - -@@ -691,7 +689,7 @@ v3d_submit_tfu_ioctl(struct drm_device * - } - spin_unlock(&file_priv->table_lock); - -- ret = v3d_lock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); -+ ret = v3d_lock_bo_reservations(job->bo, bo_count, &acquire_ctx); - if (ret) - goto fail; - -@@ -710,7 +708,7 @@ v3d_submit_tfu_ioctl(struct drm_device * - - v3d_attach_object_fences(job->bo, bo_count, sched_done_fence); - -- v3d_unlock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); -+ v3d_unlock_bo_reservations(job->bo, bo_count, &acquire_ctx); - - /* Update the return sync object */ - sync_out = drm_syncobj_find(file_priv, args->out_sync); -@@ -726,7 +724,7 @@ v3d_submit_tfu_ioctl(struct drm_device * - - fail_unreserve: - mutex_unlock(&v3d->sched_lock); -- v3d_unlock_bo_reservations(dev, job->bo, bo_count, &acquire_ctx); -+ v3d_unlock_bo_reservations(job->bo, bo_count, &acquire_ctx); - fail: - v3d_tfu_job_put(job); - diff --git a/target/linux/brcm2708/patches-4.19/950-0565-drm-v3d-Add-missing-fence-timeline-name-for-TFU.patch b/target/linux/brcm2708/patches-4.19/950-0565-drm-v3d-Add-missing-fence-timeline-name-for-TFU.patch deleted file mode 100644 index 12e00cbd53..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0565-drm-v3d-Add-missing-fence-timeline-name-for-TFU.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 49281ec9b6f3c7bda94c798133dd35d50eb69649 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 30 Nov 2018 16:57:59 -0800 -Subject: [PATCH 565/806] drm/v3d: Add missing fence timeline name for TFU. - -We shouldn't be returning v3d-render for our new queue. - -Signed-off-by: Eric Anholt -Fixes: 83d5139982db ("drm/v3d: Add support for submitting jobs to the TFU.") -Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-6-eric@anholt.net -Reviewed-by: Dave Emett -(cherry picked from commit db176f6ba1da39ad0016c77b9775a6bb3d0ce88a) ---- - drivers/gpu/drm/v3d/v3d_fence.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_fence.c -+++ b/drivers/gpu/drm/v3d/v3d_fence.c -@@ -29,10 +29,16 @@ static const char *v3d_fence_get_timelin - { - struct v3d_fence *f = to_v3d_fence(fence); - -- if (f->queue == V3D_BIN) -+ switch (f->queue) { -+ case V3D_BIN: - return "v3d-bin"; -- else -+ case V3D_RENDER: - return "v3d-render"; -+ case V3D_TFU: -+ return "v3d-tfu"; -+ default: -+ return NULL; -+ } - } - - const struct dma_fence_ops v3d_fence_ops = { diff --git a/target/linux/brcm2708/patches-4.19/950-0565-drm-vc4-firmware-kms-Remove-incorrect-overscan-suppo.patch b/target/linux/brcm2708/patches-4.19/950-0565-drm-vc4-firmware-kms-Remove-incorrect-overscan-suppo.patch new file mode 100644 index 0000000000..db3f195c45 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0565-drm-vc4-firmware-kms-Remove-incorrect-overscan-suppo.patch @@ -0,0 +1,55 @@ +From 3cd15f787b391db5224a27715fe9dc6fc8559bee Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 3 May 2019 13:58:03 +0100 +Subject: [PATCH] drm: vc4-firmware-kms: Remove incorrect overscan + support. + +The overscan support was required for the old mailbox API +in order to match up the cursor and frame buffer planes. +With the newer API directly talking to dispmanx there is no +difference, therefore FKMS does not need to make any +adjustments. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 --------------- + 1 file changed, 15 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -232,7 +232,6 @@ struct vc4_crtc { + void __iomem *regs; + + struct drm_pending_vblank_event *event; +- u32 overscan[4]; + bool vblank_enabled; + u32 display_number; + u32 display_type; +@@ -468,11 +467,6 @@ static void vc4_plane_atomic_update(stru + break; + } + +- if (vc4_crtc) { +- mb->plane.dst_x += vc4_crtc->overscan[0]; +- mb->plane.dst_y += vc4_crtc->overscan[1]; +- } +- + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane update %dx%d@%d +dst(%d,%d, %d,%d) +src(%d,%d, %d,%d) 0x%08x/%08x/%08x/%d, alpha %u zpos %u\n", + plane->base.id, plane->name, + mb->plane.width, +@@ -1228,15 +1222,6 @@ static int vc4_fkms_create_screen(struct + goto err_destroy_encoder; + } + +- ret = rpi_firmware_property(vc4->firmware, +- RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN, +- &vc4_crtc->overscan, +- sizeof(vc4_crtc->overscan)); +- if (ret) { +- DRM_ERROR("Failed to get overscan state: 0x%08x\n", vc4_crtc->overscan[0]); +- memset(&vc4_crtc->overscan, 0, sizeof(vc4_crtc->overscan)); +- } +- + *ret_crtc = vc4_crtc; + + return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0566-drm-v3d-Add-more-tracepoints-for-V3D-GPU-rendering.patch b/target/linux/brcm2708/patches-4.19/950-0566-drm-v3d-Add-more-tracepoints-for-V3D-GPU-rendering.patch deleted file mode 100644 index b3bb3c7848..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0566-drm-v3d-Add-more-tracepoints-for-V3D-GPU-rendering.patch +++ /dev/null @@ -1,205 +0,0 @@ -From 128adbc39c9826ca137ca3627cff17644e786fdb Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 30 Nov 2018 16:57:58 -0800 -Subject: [PATCH 566/806] drm/v3d: Add more tracepoints for V3D GPU rendering. - -The core scheduler tells us when the job is pushed to the scheduler's -queue, and I had the job_run functions saying when they actually queue -the job to the hardware. By adding tracepoints for the very top of -the ioctls and the IRQs signaling job completion, "perf record -a -e -v3d:.\* -e gpu_scheduler:.\* ; perf script" gets you a pretty -decent timeline. - -Signed-off-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-5-eric@anholt.net -Reviewed-by: Dave Emett -(cherry picked from commit 55a9b74846ed5e6219c7d81a8e1bf96f25d8ad5e) ---- - drivers/gpu/drm/v3d/v3d_gem.c | 4 ++ - drivers/gpu/drm/v3d/v3d_irq.c | 19 +++++- - drivers/gpu/drm/v3d/v3d_trace.h | 101 ++++++++++++++++++++++++++++++++ - 3 files changed, 121 insertions(+), 3 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -521,6 +521,8 @@ v3d_submit_cl_ioctl(struct drm_device *d - struct drm_syncobj *sync_out; - int ret = 0; - -+ trace_v3d_submit_cl_ioctl(&v3d->drm, args->rcl_start, args->rcl_end); -+ - if (args->pad != 0) { - DRM_INFO("pad must be zero: %d\n", args->pad); - return -EINVAL; -@@ -648,6 +650,8 @@ v3d_submit_tfu_ioctl(struct drm_device * - int ret = 0; - int bo_count; - -+ trace_v3d_submit_tfu_ioctl(&v3d->drm, args->iia); -+ - job = kcalloc(1, sizeof(*job), GFP_KERNEL); - if (!job) - return -ENOMEM; ---- a/drivers/gpu/drm/v3d/v3d_irq.c -+++ b/drivers/gpu/drm/v3d/v3d_irq.c -@@ -15,6 +15,7 @@ - - #include "v3d_drv.h" - #include "v3d_regs.h" -+#include "v3d_trace.h" - - #define V3D_CORE_IRQS ((u32)(V3D_INT_OUTOMEM | \ - V3D_INT_FLDONE | \ -@@ -88,12 +89,20 @@ v3d_irq(int irq, void *arg) - } - - if (intsts & V3D_INT_FLDONE) { -- dma_fence_signal(v3d->bin_job->bin.done_fence); -+ struct v3d_fence *fence = -+ to_v3d_fence(v3d->bin_job->bin.done_fence); -+ -+ trace_v3d_bcl_irq(&v3d->drm, fence->seqno); -+ dma_fence_signal(&fence->base); - status = IRQ_HANDLED; - } - - if (intsts & V3D_INT_FRDONE) { -- dma_fence_signal(v3d->render_job->render.done_fence); -+ struct v3d_fence *fence = -+ to_v3d_fence(v3d->render_job->render.done_fence); -+ -+ trace_v3d_rcl_irq(&v3d->drm, fence->seqno); -+ dma_fence_signal(&fence->base); - status = IRQ_HANDLED; - } - -@@ -119,7 +128,11 @@ v3d_hub_irq(int irq, void *arg) - V3D_WRITE(V3D_HUB_INT_CLR, intsts); - - if (intsts & V3D_HUB_INT_TFUC) { -- dma_fence_signal(v3d->tfu_job->done_fence); -+ struct v3d_fence *fence = -+ to_v3d_fence(v3d->tfu_job->done_fence); -+ -+ trace_v3d_tfu_irq(&v3d->drm, fence->seqno); -+ dma_fence_signal(&fence->base); - status = IRQ_HANDLED; - } - ---- a/drivers/gpu/drm/v3d/v3d_trace.h -+++ b/drivers/gpu/drm/v3d/v3d_trace.h -@@ -12,6 +12,28 @@ - #define TRACE_SYSTEM v3d - #define TRACE_INCLUDE_FILE v3d_trace - -+TRACE_EVENT(v3d_submit_cl_ioctl, -+ TP_PROTO(struct drm_device *dev, u32 ct1qba, u32 ct1qea), -+ TP_ARGS(dev, ct1qba, ct1qea), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ __field(u32, ct1qba) -+ __field(u32, ct1qea) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ __entry->ct1qba = ct1qba; -+ __entry->ct1qea = ct1qea; -+ ), -+ -+ TP_printk("dev=%u, RCL 0x%08x..0x%08x", -+ __entry->dev, -+ __entry->ct1qba, -+ __entry->ct1qea) -+); -+ - TRACE_EVENT(v3d_submit_cl, - TP_PROTO(struct drm_device *dev, bool is_render, - uint64_t seqno, -@@ -42,6 +64,85 @@ TRACE_EVENT(v3d_submit_cl, - __entry->ctnqea) - ); - -+TRACE_EVENT(v3d_bcl_irq, -+ TP_PROTO(struct drm_device *dev, -+ uint64_t seqno), -+ TP_ARGS(dev, seqno), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ __field(u64, seqno) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ __entry->seqno = seqno; -+ ), -+ -+ TP_printk("dev=%u, seqno=%llu", -+ __entry->dev, -+ __entry->seqno) -+); -+ -+TRACE_EVENT(v3d_rcl_irq, -+ TP_PROTO(struct drm_device *dev, -+ uint64_t seqno), -+ TP_ARGS(dev, seqno), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ __field(u64, seqno) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ __entry->seqno = seqno; -+ ), -+ -+ TP_printk("dev=%u, seqno=%llu", -+ __entry->dev, -+ __entry->seqno) -+); -+ -+TRACE_EVENT(v3d_tfu_irq, -+ TP_PROTO(struct drm_device *dev, -+ uint64_t seqno), -+ TP_ARGS(dev, seqno), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ __field(u64, seqno) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ __entry->seqno = seqno; -+ ), -+ -+ TP_printk("dev=%u, seqno=%llu", -+ __entry->dev, -+ __entry->seqno) -+); -+ -+TRACE_EVENT(v3d_submit_tfu_ioctl, -+ TP_PROTO(struct drm_device *dev, u32 iia), -+ TP_ARGS(dev, iia), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ __field(u32, iia) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ __entry->iia = iia; -+ ), -+ -+ TP_printk("dev=%u, IIA 0x%08x", -+ __entry->dev, -+ __entry->iia) -+); -+ - TRACE_EVENT(v3d_submit_tfu, - TP_PROTO(struct drm_device *dev, - uint64_t seqno), diff --git a/target/linux/brcm2708/patches-4.19/950-0566-drm-vc4-Log-flags-in-fkms-mode-set.patch b/target/linux/brcm2708/patches-4.19/950-0566-drm-vc4-Log-flags-in-fkms-mode-set.patch new file mode 100644 index 0000000000..59f6f797c8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0566-drm-vc4-Log-flags-in-fkms-mode-set.patch @@ -0,0 +1,31 @@ +From 07288c2bd9733dc9317c5f9b02980a59a05ce3af Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 7 May 2019 12:13:34 +0100 +Subject: [PATCH] drm: vc4: Log flags in fkms mode set + +The flags contain info such as limited/full range RGB, aspect +ratio, and a fwe other useful things. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -685,12 +685,13 @@ static void vc4_crtc_mode_set_nofb(struc + return; + } + +- DRM_DEBUG_KMS("Setting mode for display num %u mode name %s, clk %d, h(disp %d, start %d, end %d, total %d, skew %d) v(disp %d, start %d, end %d, total %d, scan %d), vrefresh %d, par %u\n", ++ DRM_DEBUG_KMS("Setting mode for display num %u mode name %s, clk %d, h(disp %d, start %d, end %d, total %d, skew %d) v(disp %d, start %d, end %d, total %d, scan %d), vrefresh %d, par %u, flags 0x%04x\n", + vc4_crtc->display_number, mode->name, mode->clock, + mode->hdisplay, mode->hsync_start, mode->hsync_end, + mode->htotal, mode->hskew, mode->vdisplay, + mode->vsync_start, mode->vsync_end, mode->vtotal, +- mode->vscan, mode->vrefresh, mode->picture_aspect_ratio); ++ mode->vscan, mode->vrefresh, mode->picture_aspect_ratio, ++ mode->flags); + mb.timings.display = vc4_crtc->display_number; + + mb.timings.video_id_code = frame.avi.video_code; diff --git a/target/linux/brcm2708/patches-4.19/950-0567-drm-v3d-Drop-unused-v3d_flush_caches.patch b/target/linux/brcm2708/patches-4.19/950-0567-drm-v3d-Drop-unused-v3d_flush_caches.patch deleted file mode 100644 index e238f32a98..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0567-drm-v3d-Drop-unused-v3d_flush_caches.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 065c8947cb7c40bfb3e76dcbb9d901b5e8fe0ea4 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 3 Dec 2018 14:24:34 -0800 -Subject: [PATCH 567/806] drm/v3d: Drop unused v3d_flush_caches(). - -Now that I've specified how the end-of-pipeline flushing should work, -we're never going to use this function. - -Signed-off-by: Eric Anholt -Reviewed-by: Dave Emett -Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-2-eric@anholt.net -(cherry picked from commit 2aa34fd5c7754824cf5488b61ac644f30d3c5c85) ---- - drivers/gpu/drm/v3d/v3d_drv.h | 1 - - drivers/gpu/drm/v3d/v3d_gem.c | 21 --------------------- - 2 files changed, 22 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_drv.h -+++ b/drivers/gpu/drm/v3d/v3d_drv.h -@@ -308,7 +308,6 @@ void v3d_exec_put(struct v3d_exec_info * - void v3d_tfu_job_put(struct v3d_tfu_job *exec); - void v3d_reset(struct v3d_dev *v3d); - void v3d_invalidate_caches(struct v3d_dev *v3d); --void v3d_flush_caches(struct v3d_dev *v3d); - - /* v3d_irq.c */ - int v3d_irq_init(struct v3d_dev *v3d); ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -175,20 +175,6 @@ v3d_invalidate_slices(struct v3d_dev *v3 - V3D_SET_FIELD(0xf, V3D_SLCACTL_ICC)); - } - --/* Invalidates texture L2 cachelines */ --static void --v3d_invalidate_l2t(struct v3d_dev *v3d, int core) --{ -- V3D_CORE_WRITE(core, -- V3D_CTL_L2TCACTL, -- V3D_L2TCACTL_L2TFLS | -- V3D_SET_FIELD(V3D_L2TCACTL_FLM_CLEAR, V3D_L2TCACTL_FLM)); -- if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & -- V3D_L2TCACTL_L2TFLS), 100)) { -- DRM_ERROR("Timeout waiting for L2T invalidate\n"); -- } --} -- - void - v3d_invalidate_caches(struct v3d_dev *v3d) - { -@@ -199,13 +185,6 @@ v3d_invalidate_caches(struct v3d_dev *v3 - v3d_flush_l2t(v3d, 0); - } - --void --v3d_flush_caches(struct v3d_dev *v3d) --{ -- v3d_invalidate_l1td(v3d, 0); -- v3d_invalidate_l2t(v3d, 0); --} -- - static void - v3d_attach_object_fences(struct v3d_bo **bos, int bo_count, - struct dma_fence *fence) diff --git a/target/linux/brcm2708/patches-4.19/950-0567-drm-vc4-firmware-kms-Fix-DSI-display-support.patch b/target/linux/brcm2708/patches-4.19/950-0567-drm-vc4-firmware-kms-Fix-DSI-display-support.patch new file mode 100644 index 0000000000..b45df39e4f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0567-drm-vc4-firmware-kms-Fix-DSI-display-support.patch @@ -0,0 +1,25 @@ +From d66b1d056d07b27803ba0756ecdb0d4419bcaaa2 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 16 May 2019 17:49:42 +0100 +Subject: [PATCH] drm: vc4-firmware-kms: Fix DSI display support + +The mode was incorrectly listed as interlaced, which was then +rejected. +Correct this and FKMS works with the DSI display. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -1003,7 +1003,7 @@ static const struct drm_display_mode lcd + 25979400 / 1000, + 800, 800 + 1, 800 + 1 + 2, 800 + 1 + 2 + 46, 0, + 480, 480 + 7, 480 + 7 + 2, 480 + 7 + 2 + 21, 0, +- DRM_MODE_FLAG_INTERLACE) ++ 0) + }; + + static int vc4_fkms_lcd_connector_get_modes(struct drm_connector *connector) diff --git a/target/linux/brcm2708/patches-4.19/950-0568-drm-v3d-Don-t-bother-flushing-L1TD-at-job-start.patch b/target/linux/brcm2708/patches-4.19/950-0568-drm-v3d-Don-t-bother-flushing-L1TD-at-job-start.patch deleted file mode 100644 index f7195c4d23..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0568-drm-v3d-Don-t-bother-flushing-L1TD-at-job-start.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 4a6410a53059d6505680b70fc438b7cfbf8939ca Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 3 Dec 2018 14:24:35 -0800 -Subject: [PATCH 568/806] drm/v3d: Don't bother flushing L1TD at job start. - -This is the write combiner for TMU writes. You're supposed to flush -that at job end if you had dirtied any cachelines. Flushing it at job -start then doesn't make any sense. - -Signed-off-by: Eric Anholt -Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") -Reviewed-by: Dave Emett -Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-3-eric@anholt.net -(cherry picked from commit 2e6dc3bd80478212e84addf1cafd6ec60674b884) ---- - drivers/gpu/drm/v3d/v3d_gem.c | 12 ------------ - 1 file changed, 12 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -139,22 +139,10 @@ v3d_invalidate_l2(struct v3d_dev *v3d, i - V3D_L2CACTL_L2CENA); - } - --static void --v3d_invalidate_l1td(struct v3d_dev *v3d, int core) --{ -- V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, V3D_L2TCACTL_TMUWCF); -- if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & -- V3D_L2TCACTL_L2TFLS), 100)) { -- DRM_ERROR("Timeout waiting for L1T write combiner flush\n"); -- } --} -- - /* Invalidates texture L2 cachelines */ - static void - v3d_flush_l2t(struct v3d_dev *v3d, int core) - { -- v3d_invalidate_l1td(v3d, core); -- - V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, - V3D_L2TCACTL_L2TFLS | - V3D_SET_FIELD(V3D_L2TCACTL_FLM_FLUSH, V3D_L2TCACTL_FLM)); diff --git a/target/linux/brcm2708/patches-4.19/950-0568-drm-vc4-Probe-DPI-DSI-timings-from-the-firmware.patch b/target/linux/brcm2708/patches-4.19/950-0568-drm-vc4-Probe-DPI-DSI-timings-from-the-firmware.patch new file mode 100644 index 0000000000..1a27777ac7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0568-drm-vc4-Probe-DPI-DSI-timings-from-the-firmware.patch @@ -0,0 +1,120 @@ +From b4ffa49d762a4af832d0d8660caf59722c0ff75a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 21 May 2019 11:50:00 +0100 +Subject: [PATCH] drm: vc4: Probe DPI/DSI timings from the firmware + +For DPI and DSI displays query the firmware as to the configuration +and add it as the only mode for DRM. + +In theory we can add plumbing for setting the DPI/DSI mode from +KMS, but this is not being added at present as the support frameworks +aren't present in the firmware. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 60 ++++++++++++++++++---- + include/soc/bcm2835/raspberrypi-firmware.h | 1 + + 2 files changed, 51 insertions(+), 10 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -280,7 +280,7 @@ static u32 vc4_get_display_type(u32 disp + /* The firmware display (DispmanX) IDs map to specific types in + * a fixed manner. + */ +- DRM_MODE_ENCODER_DSI, /* MAIN_LCD */ ++ DRM_MODE_ENCODER_DSI, /* MAIN_LCD - DSI or DPI */ + DRM_MODE_ENCODER_DSI, /* AUX_LCD */ + DRM_MODE_ENCODER_TMDS, /* HDMI0 */ + DRM_MODE_ENCODER_TVDAC, /* VEC */ +@@ -362,7 +362,6 @@ static void vc4_plane_atomic_update(stru + vc4_get_vc_image_fmt(drm_fmt->format); + struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); + struct mailbox_set_plane *mb = &vc4_plane->mb; +- struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); + int num_planes = fb->format->num_planes; + struct drm_display_mode *mode = &state->crtc->mode; + unsigned int rotation = SUPPORTED_ROTATIONS; +@@ -997,7 +996,9 @@ static int vc4_fkms_connector_get_modes( + return ret; + } + +-/* FIXME: Read LCD mode from the firmware. This is the DSI panel resolution. */ ++/* This is the DSI panel resolution. Use this as a default should the firmware ++ * not respond to our request for the timings. ++ */ + static const struct drm_display_mode lcd_mode = { + DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, + 25979400 / 1000, +@@ -1008,15 +1009,54 @@ static const struct drm_display_mode lcd + + static int vc4_fkms_lcd_connector_get_modes(struct drm_connector *connector) + { +- //struct vc4_fkms_connector *fkms_connector = +- // to_vc4_fkms_connector(connector); +- //struct drm_encoder *encoder = fkms_connector->encoder; +- //struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct vc4_dev *vc4 = fkms_connector->vc4_dev; + struct drm_display_mode *mode; +- //int ret = 0; ++ struct mailbox_set_mode mb = { ++ .tag1 = { RPI_FIRMWARE_GET_DISPLAY_TIMING, ++ sizeof(struct set_timings), 0}, ++ .timings = { .display = fkms_connector->display_number }, ++ }; ++ struct drm_display_mode fw_mode; ++ int ret = 0; ++ ++ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); ++ if (!ret) { ++ /* Equivalent to DRM_MODE macro. */ ++ memset(&fw_mode, 0, sizeof(fw_mode)); ++ strncpy(fw_mode.name, "LCD_MODE", sizeof(fw_mode.name)); ++ fw_mode.status = 0; ++ fw_mode.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; ++ fw_mode.clock = mb.timings.clock; ++ fw_mode.hdisplay = mb.timings.hdisplay; ++ fw_mode.hsync_start = mb.timings.hsync_start; ++ fw_mode.hsync_end = mb.timings.hsync_end; ++ fw_mode.htotal = mb.timings.htotal; ++ fw_mode.hskew = 0; ++ fw_mode.vdisplay = mb.timings.vdisplay; ++ fw_mode.vsync_start = mb.timings.vsync_start; ++ fw_mode.vsync_end = mb.timings.vsync_end; ++ fw_mode.vtotal = mb.timings.vtotal; ++ fw_mode.vscan = mb.timings.vscan; ++ if (mb.timings.flags & TIMINGS_FLAGS_H_SYNC_POS) ++ fw_mode.flags |= DRM_MODE_FLAG_PHSYNC; ++ else ++ fw_mode.flags |= DRM_MODE_FLAG_NHSYNC; ++ if (mb.timings.flags & TIMINGS_FLAGS_V_SYNC_POS) ++ fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; ++ else ++ fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; ++ ++ fw_mode.base.type = DRM_MODE_OBJECT_MODE; ++ ++ mode = drm_mode_duplicate(connector->dev, ++ &fw_mode); ++ } else { ++ mode = drm_mode_duplicate(connector->dev, ++ &lcd_mode); ++ } + +- mode = drm_mode_duplicate(connector->dev, +- &lcd_mode); + if (!mode) { + DRM_ERROR("Failed to create a new display mode\n"); + return -ENOMEM; +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -151,6 +151,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, + + RPI_FIRMWARE_SET_PLANE = 0x00048015, ++ RPI_FIRMWARE_GET_DISPLAY_TIMING = 0x00040017, + RPI_FIRMWARE_SET_TIMING = 0x00048017, + + RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, diff --git a/target/linux/brcm2708/patches-4.19/950-0569-drm-v3d-Drop-the-wait-for-L2T-flush-to-complete.patch b/target/linux/brcm2708/patches-4.19/950-0569-drm-v3d-Drop-the-wait-for-L2T-flush-to-complete.patch deleted file mode 100644 index 70c14f1826..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0569-drm-v3d-Drop-the-wait-for-L2T-flush-to-complete.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 9d8fa62500ae52348d36766e70b49c7508addaf3 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 3 Dec 2018 14:24:36 -0800 -Subject: [PATCH 569/806] drm/v3d: Drop the wait for L2T flush to complete. - -According to Dave, once you've started an L2T flush, all L2T accesses -will be blocked until the flush completes. This fixes a consistent -3-4ms stall between the ioctl and running the job, and 3DMMES Taiji -goes from 27fps to 110fps. - -v2: Leave a note about why we don't need to wait for completion. - -Signed-off-by: Eric Anholt -Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") -Reviewed-by: Dave Emett -Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-4-eric@anholt.net -(cherry picked from commit 51c1b6f9eb3dbdec91b0e3c89f623e634c996bbb) ---- - drivers/gpu/drm/v3d/v3d_gem.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -143,13 +143,13 @@ v3d_invalidate_l2(struct v3d_dev *v3d, i - static void - v3d_flush_l2t(struct v3d_dev *v3d, int core) - { -+ /* While there is a busy bit (V3D_L2TCACTL_L2TFLS), we don't -+ * need to wait for completion before dispatching the job -- -+ * L2T accesses will be stalled until the flush has completed. -+ */ - V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, - V3D_L2TCACTL_L2TFLS | - V3D_SET_FIELD(V3D_L2TCACTL_FLM_FLUSH, V3D_L2TCACTL_FLM)); -- if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & -- V3D_L2TCACTL_L2TFLS), 100)) { -- DRM_ERROR("Timeout waiting for L2T flush\n"); -- } - } - - /* Invalidates the slice caches. These are read-only caches. */ diff --git a/target/linux/brcm2708/patches-4.19/950-0569-drm-vc4-handle-the-case-where-there-are-no-available.patch b/target/linux/brcm2708/patches-4.19/950-0569-drm-vc4-handle-the-case-where-there-are-no-available.patch new file mode 100644 index 0000000000..346d32e2d6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0569-drm-vc4-handle-the-case-where-there-are-no-available.patch @@ -0,0 +1,67 @@ +From dd99aa50a3ea7f7fe1ddfd59b1a2e969c744b8a0 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Tue, 28 May 2019 13:56:06 +0100 +Subject: [PATCH] drm: vc4: handle the case where there are no + available displays + +It's reasonable for the firmware to return zero as the number of +attached displays. Handle this case as otherwise drm thinks that +the DSI panel is attached, which is nonsense. + +Signed-off-by: Jonathan Bell +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 32 +++++++++++++++----------- + 1 file changed, 18 insertions(+), 14 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -1309,13 +1309,13 @@ static int vc4_fkms_bind(struct device * + RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS, + &num_displays, sizeof(u32)); + +- /* If we fail to get the number of displays, or it returns 0, then ++ /* If we fail to get the number of displays, then + * assume old firmware that doesn't have the mailbox call, so just + * set one display + */ +- if (ret || num_displays == 0) { ++ if (ret) { + num_displays = 1; +- DRM_WARN("Unable to determine number of displays's. Assuming 1\n"); ++ DRM_WARN("Unable to determine number of displays - assuming 1\n"); + ret = 0; + } + +@@ -1344,17 +1344,21 @@ static int vc4_fkms_bind(struct device * + display_num); + } + +- /* Map the SMI interrupt reg */ +- crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0); +- if (IS_ERR(crtc_list[0]->regs)) +- DRM_ERROR("Oh dear, failed to map registers\n"); +- +- writel(0, crtc_list[0]->regs + SMICS); +- ret = devm_request_irq(dev, platform_get_irq(pdev, 0), +- vc4_crtc_irq_handler, 0, "vc4 firmware kms", +- crtc_list); +- if (ret) +- DRM_ERROR("Oh dear, failed to register IRQ\n"); ++ if (num_displays > 0) { ++ /* Map the SMI interrupt reg */ ++ crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(crtc_list[0]->regs)) ++ DRM_ERROR("Oh dear, failed to map registers\n"); ++ ++ writel(0, crtc_list[0]->regs + SMICS); ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), ++ vc4_crtc_irq_handler, 0, ++ "vc4 firmware kms", crtc_list); ++ if (ret) ++ DRM_ERROR("Oh dear, failed to register IRQ\n"); ++ } else { ++ DRM_WARN("No displays found. Consider forcing hotplug if HDMI is attached\n"); ++ } + + platform_set_drvdata(pdev, crtc_list); + diff --git a/target/linux/brcm2708/patches-4.19/950-0570-drm-v3d-Stop-trying-to-flush-L2C-on-V3D-3.3.patch b/target/linux/brcm2708/patches-4.19/950-0570-drm-v3d-Stop-trying-to-flush-L2C-on-V3D-3.3.patch deleted file mode 100644 index 442eb63c54..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0570-drm-v3d-Stop-trying-to-flush-L2C-on-V3D-3.3.patch +++ /dev/null @@ -1,45 +0,0 @@ -From abee30ca29ec11b62842934de04b5a0033bff21b Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 3 Dec 2018 14:24:37 -0800 -Subject: [PATCH 570/806] drm/v3d: Stop trying to flush L2C on V3D 3.3+ - -This cache was replaced with the slice accessing the L2T in the newer -generations. Noted by Dave during review. - -Signed-off-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-5-eric@anholt.net -Reviewed-by: Dave Emett -(cherry picked from commit 7b9d2fe4350a9c12f66ad8cc78c1098226f6c3c2) ---- - drivers/gpu/drm/v3d/v3d_gem.c | 11 ++++++++--- - 1 file changed, 8 insertions(+), 3 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -130,10 +130,15 @@ v3d_flush_l3(struct v3d_dev *v3d) - } - } - --/* Invalidates the (read-only) L2 cache. */ -+/* Invalidates the (read-only) L2C cache. This was the L2 cache for -+ * uniforms and instructions on V3D 3.2. -+ */ - static void --v3d_invalidate_l2(struct v3d_dev *v3d, int core) -+v3d_invalidate_l2c(struct v3d_dev *v3d, int core) - { -+ if (v3d->ver > 32) -+ return; -+ - V3D_CORE_WRITE(core, V3D_CTL_L2CACTL, - V3D_L2CACTL_L2CCLR | - V3D_L2CACTL_L2CENA); -@@ -168,7 +173,7 @@ v3d_invalidate_caches(struct v3d_dev *v3 - { - v3d_flush_l3(v3d); - -- v3d_invalidate_l2(v3d, 0); -+ v3d_invalidate_l2c(v3d, 0); - v3d_invalidate_slices(v3d, 0); - v3d_flush_l2t(v3d, 0); - } diff --git a/target/linux/brcm2708/patches-4.19/950-0570-drm-vc4-Support-the-VEC-in-FKMS.patch b/target/linux/brcm2708/patches-4.19/950-0570-drm-vc4-Support-the-VEC-in-FKMS.patch new file mode 100644 index 0000000000..29db708769 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0570-drm-vc4-Support-the-VEC-in-FKMS.patch @@ -0,0 +1,62 @@ +From 82ef7a95f5ae86df811253d58d93ca4fb2cbd45a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 24 May 2019 17:59:01 +0100 +Subject: [PATCH] drm/vc4: Support the VEC in FKMS + +Extends the DPI/DSI support to also report the VEC output +which supports interlacing too. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 16 +++++++++++++++- + 1 file changed, 15 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -125,6 +125,7 @@ struct set_timings { + #define TIMINGS_FLAGS_H_SYNC_NEG 0 + #define TIMINGS_FLAGS_V_SYNC_POS BIT(1) + #define TIMINGS_FLAGS_V_SYNC_NEG 0 ++#define TIMINGS_FLAGS_INTERLACE BIT(2) + + #define TIMINGS_FLAGS_ASPECT_MASK GENMASK(7, 4) + #define TIMINGS_FLAGS_ASPECT_NONE (0 << 4) +@@ -1047,6 +1048,12 @@ static int vc4_fkms_lcd_connector_get_mo + fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; + else + fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; ++ if (mb.timings.flags & TIMINGS_FLAGS_V_SYNC_POS) ++ fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; ++ else ++ fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; ++ if (mb.timings.flags & TIMINGS_FLAGS_INTERLACE) ++ fw_mode.flags |= DRM_MODE_FLAG_INTERLACE; + + fw_mode.base.type = DRM_MODE_OBJECT_MODE; + +@@ -1133,17 +1140,24 @@ vc4_fkms_connector_init(struct drm_devic + DRM_MODE_CONNECTOR_DSI); + drm_connector_helper_add(connector, + &vc4_fkms_lcd_conn_helper_funcs); ++ connector->interlace_allowed = 0; ++ } else if (fkms_connector->display_type == DRM_MODE_ENCODER_TVDAC) { ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_Composite); ++ drm_connector_helper_add(connector, ++ &vc4_fkms_lcd_conn_helper_funcs); ++ connector->interlace_allowed = 1; + } else { + drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, + DRM_MODE_CONNECTOR_HDMIA); + drm_connector_helper_add(connector, + &vc4_fkms_connector_helper_funcs); ++ connector->interlace_allowed = 0; + } + + connector->polled = (DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT); + +- connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + drm_connector_attach_encoder(connector, encoder); diff --git a/target/linux/brcm2708/patches-4.19/950-0571-drm-v3d-Invalidate-the-caches-from-the-outside-in.patch b/target/linux/brcm2708/patches-4.19/950-0571-drm-v3d-Invalidate-the-caches-from-the-outside-in.patch deleted file mode 100644 index 3348f43d2a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0571-drm-v3d-Invalidate-the-caches-from-the-outside-in.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 514653cd51ff6bc14268dc0f98ebb37daa8f0e88 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 3 Dec 2018 14:24:38 -0800 -Subject: [PATCH 571/806] drm/v3d: Invalidate the caches from the outside in. - -This would be a fairly obscure race, but let's make sure we don't ever -lose it. - -Signed-off-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-6-eric@anholt.net -Reviewed-by: Dave Emett -(cherry picked from commit aa5beec32e8b78bfcf621e3c3daebfb1644b6365) ---- - drivers/gpu/drm/v3d/v3d_gem.c | 8 ++++++-- - 1 file changed, 6 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -171,11 +171,15 @@ v3d_invalidate_slices(struct v3d_dev *v3 - void - v3d_invalidate_caches(struct v3d_dev *v3d) - { -+ /* Invalidate the caches from the outside in. That way if -+ * another CL's concurrent use of nearby memory were to pull -+ * an invalidated cacheline back in, we wouldn't leave stale -+ * data in the inner cache. -+ */ - v3d_flush_l3(v3d); -- - v3d_invalidate_l2c(v3d, 0); -- v3d_invalidate_slices(v3d, 0); - v3d_flush_l2t(v3d, 0); -+ v3d_invalidate_slices(v3d, 0); - } - - static void diff --git a/target/linux/brcm2708/patches-4.19/950-0571-drm-vc4-Fixup-typo-when-setting-HDMI-aspect-ratio.patch b/target/linux/brcm2708/patches-4.19/950-0571-drm-vc4-Fixup-typo-when-setting-HDMI-aspect-ratio.patch new file mode 100644 index 0000000000..69320e89fd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0571-drm-vc4-Fixup-typo-when-setting-HDMI-aspect-ratio.patch @@ -0,0 +1,39 @@ +From 2d35ddcd988499ac7bfd08997086cecfc6b5acb3 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 7 May 2019 15:00:02 +0100 +Subject: [PATCH] drm: vc4: Fixup typo when setting HDMI aspect ratio + +Assignment was to the wrong structure. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -717,19 +717,19 @@ static void vc4_crtc_mode_set_nofb(struc + switch (frame.avi.picture_aspect) { + default: + case HDMI_PICTURE_ASPECT_NONE: +- mode->flags |= TIMINGS_FLAGS_ASPECT_NONE; ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_NONE; + break; + case HDMI_PICTURE_ASPECT_4_3: +- mode->flags |= TIMINGS_FLAGS_ASPECT_4_3; ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_4_3; + break; + case HDMI_PICTURE_ASPECT_16_9: +- mode->flags |= TIMINGS_FLAGS_ASPECT_16_9; ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_16_9; + break; + case HDMI_PICTURE_ASPECT_64_27: +- mode->flags |= TIMINGS_FLAGS_ASPECT_64_27; ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_64_27; + break; + case HDMI_PICTURE_ASPECT_256_135: +- mode->flags |= TIMINGS_FLAGS_ASPECT_256_135; ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_256_135; + break; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0572-drm-v3d-Fix-BO-stats-accounting-for-dma-buf-imported.patch b/target/linux/brcm2708/patches-4.19/950-0572-drm-v3d-Fix-BO-stats-accounting-for-dma-buf-imported.patch deleted file mode 100644 index 6dd89a9ed3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0572-drm-v3d-Fix-BO-stats-accounting-for-dma-buf-imported.patch +++ /dev/null @@ -1,40 +0,0 @@ -From f91d0382b735a3d7711f6b160d80627cd4be54af Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 7 Feb 2019 15:26:13 -0800 -Subject: [PATCH 572/806] drm/v3d: Fix BO stats accounting for dma-buf-imported - buffers. - -We always decrement at GEM free, so make sure we increment at GEM -creation for dma-bufs. - -Signed-off-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20190207232613.24981-1-eric@anholt.net -Reviewed-by: Daniel Vetter -Signed-off-by: Maxime Ripard -(cherry picked from commit cc3f60cfd4f2752f1bad7eaa3839855c15347abc) ---- - drivers/gpu/drm/v3d/v3d_bo.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/gpu/drm/v3d/v3d_bo.c -+++ b/drivers/gpu/drm/v3d/v3d_bo.c -@@ -282,6 +282,7 @@ v3d_prime_import_sg_table(struct drm_dev - struct dma_buf_attachment *attach, - struct sg_table *sgt) - { -+ struct v3d_dev *v3d = to_v3d_dev(dev); - struct drm_gem_object *obj; - struct v3d_bo *bo; - -@@ -296,6 +297,11 @@ v3d_prime_import_sg_table(struct drm_dev - obj->import_attach = attach; - v3d_bo_get_pages(bo); - -+ mutex_lock(&v3d->bo_lock); -+ v3d->bo_stats.num_allocated++; -+ v3d->bo_stats.pages_allocated += obj->size >> PAGE_SHIFT; -+ mutex_unlock(&v3d->bo_lock); -+ - v3d_mmu_insert_ptes(bo); - - return obj; diff --git a/target/linux/brcm2708/patches-4.19/950-0572-drm-vc4-Correct-SAND-support-for-FKMS.patch b/target/linux/brcm2708/patches-4.19/950-0572-drm-vc4-Correct-SAND-support-for-FKMS.patch new file mode 100644 index 0000000000..4299928ab3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0572-drm-vc4-Correct-SAND-support-for-FKMS.patch @@ -0,0 +1,40 @@ +From 0dbdeb9e76e956df275e162224e12eacb0cc8b02 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 29 May 2019 15:44:11 +0100 +Subject: [PATCH] drm/vc4: Correct SAND support for FKMS. + +It was accepting NV21 which doesn't map through, but +also wasn't advertising the modifier so nothing would know +to request it. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -545,7 +545,6 @@ static bool vc4_fkms_format_mod_supporte + return false; + } + case DRM_FORMAT_NV12: +- case DRM_FORMAT_NV21: + switch (fourcc_mod_broadcom_mod(modifier)) { + case DRM_FORMAT_MOD_LINEAR: + case DRM_FORMAT_MOD_BROADCOM_SAND128: +@@ -553,6 +552,7 @@ static bool vc4_fkms_format_mod_supporte + default: + return false; + } ++ case DRM_FORMAT_NV21: + case DRM_FORMAT_RGB888: + case DRM_FORMAT_BGR888: + case DRM_FORMAT_YUV422: +@@ -599,6 +599,7 @@ static struct drm_plane *vc4_fkms_plane_ + * would prefer to scan out linear (less bus traffic). + */ + DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED, ++ DRM_FORMAT_MOD_BROADCOM_SAND128, + DRM_FORMAT_MOD_INVALID, + }; + int i; diff --git a/target/linux/brcm2708/patches-4.19/950-0573-drm-v3d-Update-top-level-kerneldoc-for-the-addition-.patch b/target/linux/brcm2708/patches-4.19/950-0573-drm-v3d-Update-top-level-kerneldoc-for-the-addition-.patch deleted file mode 100644 index 99a7680e06..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0573-drm-v3d-Update-top-level-kerneldoc-for-the-addition-.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 752f66d4482db75db81e5255f5071de1e47ac121 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 7 Feb 2019 12:09:58 -0800 -Subject: [PATCH 573/806] drm/v3d: Update top-level kerneldoc for the addition - of TFU. - -Signed-off-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20190207201001.5730-1-eric@anholt.net -Reviewed-by: Thomas Spurden -Signed-off-by: Maxime Ripard -(cherry picked from commit fd347df16d4ed2eef565344b8f16a1134bddf185) ---- - drivers/gpu/drm/v3d/v3d_drv.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_drv.c -+++ b/drivers/gpu/drm/v3d/v3d_drv.c -@@ -7,9 +7,9 @@ - * This driver supports the Broadcom V3D 3.3 and 4.1 OpenGL ES GPUs. - * For V3D 2.x support, see the VC4 driver. - * -- * Currently only single-core rendering using the binner and renderer -- * is supported. The TFU (texture formatting unit) and V3D 4.x's CSD -- * (compute shader dispatch) are not yet supported. -+ * Currently only single-core rendering using the binner and renderer, -+ * along with TFU (texture formatting unit) rendering is supported. -+ * V3D 4.x's CSD (compute shader dispatch) is not yet supported. - */ - - #include diff --git a/target/linux/brcm2708/patches-4.19/950-0573-drm-vc4-fkms-to-query-the-VPU-for-HDMI-clock-limits.patch b/target/linux/brcm2708/patches-4.19/950-0573-drm-vc4-fkms-to-query-the-VPU-for-HDMI-clock-limits.patch new file mode 100644 index 0000000000..7f917bdd45 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0573-drm-vc4-fkms-to-query-the-VPU-for-HDMI-clock-limits.patch @@ -0,0 +1,134 @@ +From 23e6a2c2d33050255c76a499ea080e5279d6edfc Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 30 May 2019 13:56:15 +0100 +Subject: [PATCH] drm/vc4: fkms to query the VPU for HDMI clock limits + +The VPU has configured clocks for 4k (or not) via config.txt, +and will limit the choice of video modes based on that. +Make fkms query it for these limits too to avoid selecting modes +that can not be handled by the current clock setup. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_drv.h | 1 + + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 48 ++++++++++++++++++++++ + include/soc/bcm2835/raspberrypi-firmware.h | 1 + + 3 files changed, 50 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -77,6 +77,7 @@ struct vc4_dev { + struct vc4_dsi *dsi1; + struct vc4_vec *vec; + struct vc4_txp *txp; ++ struct vc4_fkms *fkms; + + struct vc4_hang_state *hang_state; + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -29,6 +29,14 @@ + #include "vc_image_types.h" + #include + ++struct get_display_cfg { ++ u32 max_pixel_clock[2]; //Max pixel clock for each display ++}; ++ ++struct vc4_fkms { ++ struct get_display_cfg cfg; ++}; ++ + #define PLANES_PER_CRTC 3 + + struct set_plane { +@@ -794,6 +802,11 @@ static void vc4_crtc_enable(struct drm_c + static enum drm_mode_status + vc4_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode) + { ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_fkms *fkms = vc4->fkms; ++ + /* Do not allow doublescan modes from user space */ + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { + DRM_DEBUG_KMS("[CRTC:%d] Doublescan mode rejected.\n", +@@ -801,6 +814,22 @@ vc4_crtc_mode_valid(struct drm_crtc *crt + return MODE_NO_DBLESCAN; + } + ++ /* Limit the pixel clock based on the HDMI clock limits from the ++ * firmware ++ */ ++ switch (vc4_crtc->display_number) { ++ case 2: /* HDMI0 */ ++ if (fkms->cfg.max_pixel_clock[0] && ++ mode->clock > fkms->cfg.max_pixel_clock[0]) ++ return MODE_CLOCK_HIGH; ++ break; ++ case 7: /* HDMI1 */ ++ if (fkms->cfg.max_pixel_clock[1] && ++ mode->clock > fkms->cfg.max_pixel_clock[1]) ++ return MODE_CLOCK_HIGH; ++ break; ++ } ++ + /* Limit the pixel clock until we can get dynamic HDMI 2.0 scrambling + * working. + */ +@@ -1301,11 +1330,16 @@ static int vc4_fkms_bind(struct device * + struct device_node *firmware_node; + struct vc4_crtc **crtc_list; + u32 num_displays, display_num; ++ struct vc4_fkms *fkms; + int ret; + u32 display_id; + + vc4->firmware_kms = true; + ++ fkms = devm_kzalloc(dev, sizeof(*fkms), GFP_KERNEL); ++ if (!fkms) ++ return -ENOMEM; ++ + /* firmware kms doesn't have precise a scanoutpos implementation, so + * we can't do the precise vblank timestamp mode. + */ +@@ -1334,6 +1368,18 @@ static int vc4_fkms_bind(struct device * + ret = 0; + } + ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_GET_DISPLAY_CFG, ++ &fkms->cfg, sizeof(fkms->cfg)); ++ ++ if (ret) ++ return -EINVAL; ++ /* The firmware works in Hz. This will be compared against kHz, so div ++ * 1000 now rather than multiple times later. ++ */ ++ fkms->cfg.max_pixel_clock[0] /= 1000; ++ fkms->cfg.max_pixel_clock[1] /= 1000; ++ + /* Allocate a list, with space for a NULL on the end */ + crtc_list = devm_kzalloc(dev, sizeof(crtc_list) * (num_displays + 1), + GFP_KERNEL); +@@ -1375,6 +1421,8 @@ static int vc4_fkms_bind(struct device * + DRM_WARN("No displays found. Consider forcing hotplug if HDMI is attached\n"); + } + ++ vc4->fkms = fkms; ++ + platform_set_drvdata(pdev, crtc_list); + + return 0; +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -153,6 +153,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_SET_PLANE = 0x00048015, + RPI_FIRMWARE_GET_DISPLAY_TIMING = 0x00040017, + RPI_FIRMWARE_SET_TIMING = 0x00048017, ++ RPI_FIRMWARE_GET_DISPLAY_CFG = 0x00040018, + + RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, + RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, diff --git a/target/linux/brcm2708/patches-4.19/950-0574-drm-vc4-Fix-oops-at-boot-with-firmwarekms-on-4.19.patch b/target/linux/brcm2708/patches-4.19/950-0574-drm-vc4-Fix-oops-at-boot-with-firmwarekms-on-4.19.patch deleted file mode 100644 index 34e10fdd42..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0574-drm-vc4-Fix-oops-at-boot-with-firmwarekms-on-4.19.patch +++ /dev/null @@ -1,22 +0,0 @@ -From ec551e663ddd1be9140cc23f1eff33b8d270ed60 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 4 Mar 2019 11:59:34 -0800 -Subject: [PATCH 574/806] drm/vc4: Fix oops at boot with firmwarekms on 4.19. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_kms.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_kms.c -@@ -107,6 +107,9 @@ vc4_ctm_commit(struct vc4_dev *vc4, stru - struct vc4_ctm_state *ctm_state = to_vc4_ctm_state(vc4->ctm_manager.state); - struct drm_color_ctm *ctm = ctm_state->ctm; - -+ if (vc4->firmware_kms) -+ return; -+ - if (ctm_state->fifo) { - HVS_WRITE(SCALER_OLEDCOEF2, - VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[0]), diff --git a/target/linux/brcm2708/patches-4.19/950-0574-drm-vc4-Max-resolution-of-7680-is-conditional-on-bei.patch b/target/linux/brcm2708/patches-4.19/950-0574-drm-vc4-Max-resolution-of-7680-is-conditional-on-bei.patch new file mode 100644 index 0000000000..83e1845ff9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0574-drm-vc4-Max-resolution-of-7680-is-conditional-on-bei.patch @@ -0,0 +1,38 @@ +From bce8c3dc146e3287519d5f6bb965dc2458e6684d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 30 May 2019 15:55:15 +0100 +Subject: [PATCH] drm/vc4: Max resolution of 7680 is conditional on + being Pi4 + +The max resolution had been increased from 2048 to 7680 for all +platforms. This code is common with Pi0-3 which have a max render +target for GL of 2048, therefore the increased resolution has to +be conditional on the platform. +Switch based on whether the bcm2835-v3d node is found, as that is +not present on Pi4. (There is a potential configuration on Pi0-3 +with no v3d, but this is very unlikely). + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_kms.c | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -429,8 +429,14 @@ int vc4_kms_load(struct drm_device *dev) + return ret; + } + +- dev->mode_config.max_width = 7680; +- dev->mode_config.max_height = 7680; ++ if (!drm_core_check_feature(dev, DRIVER_RENDER)) { ++ /* No V3D as part of vc4. Assume this is Pi4. */ ++ dev->mode_config.max_width = 7680; ++ dev->mode_config.max_height = 7680; ++ } else { ++ dev->mode_config.max_width = 2048; ++ dev->mode_config.max_height = 2048; ++ } + dev->mode_config.funcs = &vc4_mode_funcs; + dev->mode_config.preferred_depth = 24; + dev->mode_config.async_page_flip = true; diff --git a/target/linux/brcm2708/patches-4.19/950-0575-drm-vc4-Disable-V3D-interactions-if-the-v3d-componen.patch b/target/linux/brcm2708/patches-4.19/950-0575-drm-vc4-Disable-V3D-interactions-if-the-v3d-componen.patch deleted file mode 100644 index eec645b2b3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0575-drm-vc4-Disable-V3D-interactions-if-the-v3d-componen.patch +++ /dev/null @@ -1,167 +0,0 @@ -From f69f2b1354e0a548d2cb6dfdc07d37efb426eee0 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 20 Feb 2019 13:03:41 -0800 -Subject: [PATCH 575/806] drm/vc4: Disable V3D interactions if the v3d - component didn't probe. - -One might want to use the VC4 display stack without using Mesa. -Similar to the debugfs fixes for not having all of the possible -display bits enabled, make sure you can't oops in vc4 if v3d isn't -enabled. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_drv.c | 11 +++++++++++ - drivers/gpu/drm/vc4/vc4_gem.c | 10 ++++++++++ - drivers/gpu/drm/vc4/vc4_irq.c | 9 +++++++++ - drivers/gpu/drm/vc4/vc4_perfmon.c | 18 ++++++++++++++++++ - 4 files changed, 48 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -71,6 +71,9 @@ static int vc4_get_param_ioctl(struct dr - if (args->pad != 0) - return -EINVAL; - -+ if (!vc4->v3d) -+ return -EINVAL; -+ - switch (args->param) { - case DRM_VC4_PARAM_V3D_IDENT0: - ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); -@@ -271,6 +274,7 @@ static int vc4_drm_bind(struct device *d - struct platform_device *pdev = to_platform_device(dev); - struct drm_device *drm; - struct vc4_dev *vc4; -+ struct device_node *node; - int ret = 0; - - dev->coherent_dma_mask = DMA_BIT_MASK(32); -@@ -279,6 +283,13 @@ static int vc4_drm_bind(struct device *d - if (!vc4) - return -ENOMEM; - -+ /* If VC4 V3D is missing, don't advertise render nodes. */ -+ node = of_find_compatible_node(NULL, NULL, "brcm,bcm2835-v3d"); -+ if (node) -+ of_node_put(node); -+ else -+ vc4_drm_driver.driver_features &= ~DRIVER_RENDER; -+ - drm = drm_dev_alloc(&vc4_drm_driver, dev); - if (IS_ERR(drm)) - return PTR_ERR(drm); ---- a/drivers/gpu/drm/vc4/vc4_gem.c -+++ b/drivers/gpu/drm/vc4/vc4_gem.c -@@ -74,6 +74,11 @@ vc4_get_hang_state_ioctl(struct drm_devi - u32 i; - int ret = 0; - -+ if (!vc4->v3d) { -+ DRM_DEBUG("VC4_GET_HANG_STATE with no VC4 V3D probed\n"); -+ return -EINVAL; -+ } -+ - spin_lock_irqsave(&vc4->job_lock, irqflags); - kernel_state = vc4->hang_state; - if (!kernel_state) { -@@ -1124,6 +1129,11 @@ vc4_submit_cl_ioctl(struct drm_device *d - struct dma_fence *in_fence; - int ret = 0; - -+ if (!vc4->v3d) { -+ DRM_DEBUG("VC4_SUBMIT_CL with no VC4 V3D probed\n"); -+ return -EINVAL; -+ } -+ - if ((args->flags & ~(VC4_SUBMIT_CL_USE_CLEAR_COLOR | - VC4_SUBMIT_CL_FIXED_RCL_ORDER | - VC4_SUBMIT_CL_RCL_ORDER_INCREASING_X | ---- a/drivers/gpu/drm/vc4/vc4_irq.c -+++ b/drivers/gpu/drm/vc4/vc4_irq.c -@@ -229,6 +229,9 @@ vc4_irq_preinstall(struct drm_device *de - { - struct vc4_dev *vc4 = to_vc4_dev(dev); - -+ if (!vc4->v3d) -+ return; -+ - init_waitqueue_head(&vc4->job_wait_queue); - INIT_WORK(&vc4->overflow_mem_work, vc4_overflow_mem_work); - -@@ -243,6 +246,9 @@ vc4_irq_postinstall(struct drm_device *d - { - struct vc4_dev *vc4 = to_vc4_dev(dev); - -+ if (!vc4->v3d) -+ return 0; -+ - /* Enable both the render done and out of memory interrupts. */ - V3D_WRITE(V3D_INTENA, V3D_DRIVER_IRQS); - -@@ -254,6 +260,9 @@ vc4_irq_uninstall(struct drm_device *dev - { - struct vc4_dev *vc4 = to_vc4_dev(dev); - -+ if (!vc4->v3d) -+ return; -+ - /* Disable sending interrupts for our driver's IRQs. */ - V3D_WRITE(V3D_INTDIS, V3D_DRIVER_IRQS); - ---- a/drivers/gpu/drm/vc4/vc4_perfmon.c -+++ b/drivers/gpu/drm/vc4/vc4_perfmon.c -@@ -100,12 +100,18 @@ void vc4_perfmon_close_file(struct vc4_f - int vc4_perfmon_create_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) - { -+ struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_file *vc4file = file_priv->driver_priv; - struct drm_vc4_perfmon_create *req = data; - struct vc4_perfmon *perfmon; - unsigned int i; - int ret; - -+ if (!vc4->v3d) { -+ DRM_DEBUG("Creating perfmon no VC4 V3D probed\n"); -+ return -EINVAL; -+ } -+ - /* Number of monitored counters cannot exceed HW limits. */ - if (req->ncounters > DRM_VC4_MAX_PERF_COUNTERS || - !req->ncounters) -@@ -146,10 +152,16 @@ int vc4_perfmon_create_ioctl(struct drm_ - int vc4_perfmon_destroy_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) - { -+ struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_file *vc4file = file_priv->driver_priv; - struct drm_vc4_perfmon_destroy *req = data; - struct vc4_perfmon *perfmon; - -+ if (!vc4->v3d) { -+ DRM_DEBUG("Destroying perfmon no VC4 V3D probed\n"); -+ return -EINVAL; -+ } -+ - mutex_lock(&vc4file->perfmon.lock); - perfmon = idr_remove(&vc4file->perfmon.idr, req->id); - mutex_unlock(&vc4file->perfmon.lock); -@@ -164,11 +176,17 @@ int vc4_perfmon_destroy_ioctl(struct drm - int vc4_perfmon_get_values_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) - { -+ struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_file *vc4file = file_priv->driver_priv; - struct drm_vc4_perfmon_get_values *req = data; - struct vc4_perfmon *perfmon; - int ret; - -+ if (!vc4->v3d) { -+ DRM_DEBUG("Getting perfmon no VC4 V3D probed\n"); -+ return -EINVAL; -+ } -+ - mutex_lock(&vc4file->perfmon.lock); - perfmon = idr_find(&vc4file->perfmon.idr, req->id); - vc4_perfmon_get(perfmon); diff --git a/target/linux/brcm2708/patches-4.19/950-0575-staging-vc-sm-cma-Remove-obsolete-comment-and-make-f.patch b/target/linux/brcm2708/patches-4.19/950-0575-staging-vc-sm-cma-Remove-obsolete-comment-and-make-f.patch new file mode 100644 index 0000000000..86c86afb75 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0575-staging-vc-sm-cma-Remove-obsolete-comment-and-make-f.patch @@ -0,0 +1,28 @@ +From 84b54ee2ff01005f0201c51f50985faf4e79edc6 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 10 Dec 2018 17:35:58 +0000 +Subject: [PATCH] staging: vc-sm-cma: Remove obsolete comment and make + function static + +Removes obsolete comment about wanting to pass a function +pointer into mmal-vchiq as we now do. +As the function is passed as a function pointer, the function itself +can be static. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -594,8 +594,7 @@ error: + return ret; + } + +-/* FIXME: Pass a function pointer to this into vc_vchi_sm.c */ +-void ++static void + vc_sm_vpu_event(struct sm_instance *instance, struct vc_sm_result_t *reply, + int reply_len) + { diff --git a/target/linux/brcm2708/patches-4.19/950-0576-drm-v3d-Add-support-for-V3D-v4.2.patch b/target/linux/brcm2708/patches-4.19/950-0576-drm-v3d-Add-support-for-V3D-v4.2.patch deleted file mode 100644 index 0873dbad63..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0576-drm-v3d-Add-support-for-V3D-v4.2.patch +++ /dev/null @@ -1,207 +0,0 @@ -From b0e7b8814e74be0559e07f737ef18cc3709d4ac4 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 4 Oct 2018 17:22:43 -0700 -Subject: [PATCH 576/806] drm/v3d: Add support for V3D v4.2. - -No compatible string for it yet, just the version-dependent changes. -They've now tied the hub and the core interrupt lines into a single -interrupt line coming out of the block. It also turns out I made a -mistake in modeling the V3D v3.3 and v4.1 bridge as a part of V3D -itself -- the bridge is going away in favor of an external reset -controller in a larger HW module. - -v2: Use consistent checks for whether we're on 4.2, and fix a leak in - an error path. -v3: Use more general means of determining if the current 4.2 changes - are in place, as apparently other platforms may switch back (noted - by Dave). Update the binding doc. - -Signed-off-by: Eric Anholt ---- - .../devicetree/bindings/gpu/brcm,bcm-v3d.txt | 11 ++++-- - drivers/gpu/drm/v3d/v3d_drv.c | 21 +++++++++--- - drivers/gpu/drm/v3d/v3d_drv.h | 2 ++ - drivers/gpu/drm/v3d/v3d_gem.c | 12 ++++++- - drivers/gpu/drm/v3d/v3d_irq.c | 34 ++++++++++++++----- - 5 files changed, 63 insertions(+), 17 deletions(-) - ---- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt -+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt -@@ -6,15 +6,20 @@ For V3D 2.x, see brcm,bcm-vc4.txt. - Required properties: - - compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d" - - reg: Physical base addresses and lengths of the register areas --- reg-names: Names for the register areas. The "hub", "bridge", and "core0" -+- reg-names: Names for the register areas. The "hub" and "core0" - register areas are always required. The "gca" register area -- is required if the GCA cache controller is present. -+ is required if the GCA cache controller is present. The -+ "bridge" register area is required if an external reset -+ controller is not present. - - interrupts: The interrupt numbers. The first interrupt is for the hub, -- while the following interrupts are for the cores. -+ while the following interrupts are separate interrupt lines -+ for the cores (if they don't share the hub's interrupt). - See bindings/interrupt-controller/interrupts.txt - - Optional properties: - - clocks: The core clock the unit runs on -+- resets: The reset line for v3d, if not using a mapping of the bridge -+ See bindings/reset/reset.txt - - v3d { - compatible = "brcm,7268-v3d"; ---- a/drivers/gpu/drm/v3d/v3d_drv.c -+++ b/drivers/gpu/drm/v3d/v3d_drv.c -@@ -19,6 +19,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -265,10 +266,6 @@ static int v3d_platform_drm_probe(struct - v3d->pdev = pdev; - drm = &v3d->drm; - -- ret = map_regs(v3d, &v3d->bridge_regs, "bridge"); -- if (ret) -- goto dev_free; -- - ret = map_regs(v3d, &v3d->hub_regs, "hub"); - if (ret) - goto dev_free; -@@ -283,6 +280,22 @@ static int v3d_platform_drm_probe(struct - v3d->cores = V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_NCORES); - WARN_ON(v3d->cores > 1); /* multicore not yet implemented */ - -+ v3d->reset = devm_reset_control_get_exclusive(dev, NULL); -+ if (IS_ERR(v3d->reset)) { -+ ret = PTR_ERR(v3d->reset); -+ -+ if (ret == -EPROBE_DEFER) -+ goto dev_free; -+ -+ v3d->reset = NULL; -+ ret = map_regs(v3d, &v3d->bridge_regs, "bridge"); -+ if (ret) { -+ dev_err(dev, -+ "Failed to get reset control or bridge regs\n"); -+ goto dev_free; -+ } -+ } -+ - if (v3d->ver < 41) { - ret = map_regs(v3d, &v3d->gca_regs, "gca"); - if (ret) ---- a/drivers/gpu/drm/v3d/v3d_drv.h -+++ b/drivers/gpu/drm/v3d/v3d_drv.h -@@ -34,6 +34,7 @@ struct v3d_dev { - * and revision. - */ - int ver; -+ bool single_irq_line; - - struct device *dev; - struct platform_device *pdev; -@@ -42,6 +43,7 @@ struct v3d_dev { - void __iomem *bridge_regs; - void __iomem *gca_regs; - struct clk *clk; -+ struct reset_control *reset; - - /* Virtual and DMA addresses of the single shared page table. */ - volatile u32 *pt; ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -6,6 +6,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -69,7 +70,7 @@ v3d_idle_gca(struct v3d_dev *v3d) - } - - static void --v3d_reset_v3d(struct v3d_dev *v3d) -+v3d_reset_by_bridge(struct v3d_dev *v3d) - { - int version = V3D_BRIDGE_READ(V3D_TOP_GR_BRIDGE_REVISION); - -@@ -89,6 +90,15 @@ v3d_reset_v3d(struct v3d_dev *v3d) - V3D_TOP_GR_BRIDGE_SW_INIT_1_V3D_CLK_108_SW_INIT); - V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_1, 0); - } -+} -+ -+static void -+v3d_reset_v3d(struct v3d_dev *v3d) -+{ -+ if (v3d->reset) -+ reset_control_reset(v3d->reset); -+ else -+ v3d_reset_by_bridge(v3d); - - v3d_init_hw_state(v3d); - } ---- a/drivers/gpu/drm/v3d/v3d_irq.c -+++ b/drivers/gpu/drm/v3d/v3d_irq.c -@@ -27,6 +27,9 @@ - V3D_HUB_INT_MMU_CAP | \ - V3D_HUB_INT_TFUC)) - -+static irqreturn_t -+v3d_hub_irq(int irq, void *arg); -+ - static void - v3d_overflow_mem_work(struct work_struct *work) - { -@@ -112,6 +115,12 @@ v3d_irq(int irq, void *arg) - if (intsts & V3D_INT_GMPV) - dev_err(v3d->dev, "GMP violation\n"); - -+ /* V3D 4.2 wires the hub and core IRQs together, so if we & -+ * didn't see the common one then check hub for MMU IRQs. -+ */ -+ if (v3d->single_irq_line && status == IRQ_NONE) -+ return v3d_hub_irq(irq, arg); -+ - return status; - } - -@@ -170,15 +179,22 @@ v3d_irq_init(struct v3d_dev *v3d) - V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS); - V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS); - -- ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), -- v3d_hub_irq, IRQF_SHARED, -- "v3d_hub", v3d); -- if (ret) -- goto fail; -- -- ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 1), -- v3d_irq, IRQF_SHARED, -- "v3d_core0", v3d); -+ if (platform_get_irq(v3d->pdev, 1) < 0) { -+ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), -+ v3d_irq, IRQF_SHARED, -+ "v3d", v3d); -+ v3d->single_irq_line = true; -+ } else { -+ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), -+ v3d_hub_irq, IRQF_SHARED, -+ "v3d_hub", v3d); -+ if (ret) -+ goto fail; -+ -+ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 1), -+ v3d_irq, IRQF_SHARED, -+ "v3d_core0", v3d); -+ } - if (ret) - goto fail; - diff --git a/target/linux/brcm2708/patches-4.19/950-0576-staging-vc-sm-cma-Add-in-allocation-for-VPU-requests.patch b/target/linux/brcm2708/patches-4.19/950-0576-staging-vc-sm-cma-Add-in-allocation-for-VPU-requests.patch new file mode 100644 index 0000000000..105309b439 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0576-staging-vc-sm-cma-Add-in-allocation-for-VPU-requests.patch @@ -0,0 +1,1206 @@ +From 275f4673d8c0601e5dbb16e743187d264e7dbed6 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 21 Dec 2018 16:50:53 +0000 +Subject: [PATCH] staging: vc-sm-cma: Add in allocation for VPU + requests. + +Module has to change from tristate to bool as all CMA functions +are boolean. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/vc-sm-cma/Kconfig | 4 +- + .../staging/vc04_services/vc-sm-cma/Makefile | 2 +- + .../staging/vc04_services/vc-sm-cma/vc_sm.c | 642 +++++++++++++++--- + .../staging/vc04_services/vc-sm-cma/vc_sm.h | 30 +- + .../vc04_services/vc-sm-cma/vc_sm_cma.c | 99 +++ + .../vc04_services/vc-sm-cma/vc_sm_cma.h | 39 ++ + .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 10 + + .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.h | 4 + + .../vc04_services/vc-sm-cma/vc_sm_defs.h | 2 + + 9 files changed, 723 insertions(+), 109 deletions(-) + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c + create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h + +--- a/drivers/staging/vc04_services/vc-sm-cma/Kconfig ++++ b/drivers/staging/vc04_services/vc-sm-cma/Kconfig +@@ -1,6 +1,6 @@ + config BCM_VC_SM_CMA +- tristate "VideoCore Shared Memory (CMA) driver" +- depends on BCM2835_VCHIQ ++ bool "VideoCore Shared Memory (CMA) driver" ++ depends on BCM2835_VCHIQ && DMA_CMA + select RBTREE + select DMA_SHARED_BUFFER + help +--- a/drivers/staging/vc04_services/vc-sm-cma/Makefile ++++ b/drivers/staging/vc04_services/vc-sm-cma/Makefile +@@ -3,6 +3,6 @@ ccflags-y += -Idrivers/staging/vc04_serv + ccflags-y += -D__VCCOREVER__=0 + + vc-sm-cma-$(CONFIG_BCM_VC_SM_CMA) := \ +- vc_sm.o vc_sm_cma_vchi.o ++ vc_sm.o vc_sm_cma_vchi.o vc_sm_cma.o + + obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma.o +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -9,10 +9,21 @@ + * and taking some code for CMA/dmabuf handling from the Android Ion + * driver (Google/Linaro). + * +- * This is cut down version to only support import of dma_bufs from +- * other kernel drivers. A more complete implementation of the old +- * vmcs_sm functionality can follow later. + * ++ * This driver has 3 main uses: ++ * 1) Allocating buffers for the kernel or userspace that can be shared with the ++ * VPU. ++ * 2) Importing dmabufs from elsewhere for sharing with the VPU. ++ * 3) Allocating buffers for use by the VPU. ++ * ++ * In the first and second cases the native handle is a dmabuf. Releasing the ++ * resource inherently comes from releasing the dmabuf, and this will trigger ++ * unmapping on the VPU. The underlying allocation and our buffer structure are ++ * retained until the VPU has confirmed that it has finished with it. ++ * ++ * For the VPU allocations the VPU is responsible for triggering the release, ++ * and therefore the released message decrements the dma_buf refcount (with the ++ * VPU mapping having already been marked as released). + */ + + /* ---- Include Files ----------------------------------------------------- */ +@@ -39,6 +50,7 @@ + #include "vc_sm_cma_vchi.h" + + #include "vc_sm.h" ++#include "vc_sm_cma.h" + #include "vc_sm_knl.h" + + /* ---- Private Constants and Types --------------------------------------- */ +@@ -72,6 +84,7 @@ struct sm_state_t { + struct platform_device *pdev; + + struct sm_instance *sm_handle; /* Handle for videocore service. */ ++ struct cma *cma_heap; + + spinlock_t kernelid_map_lock; /* Spinlock protecting kernelid_map */ + struct idr kernelid_map; +@@ -80,6 +93,7 @@ struct sm_state_t { + struct list_head buffer_list; /* List of buffer. */ + + struct vc_sm_privdata_t *data_knl; /* Kernel internal data tracking. */ ++ struct vc_sm_privdata_t *vpu_allocs; /* All allocations from the VPU */ + struct dentry *dir_root; /* Debug fs entries root. */ + struct sm_pde_t dir_state; /* Debug fs entries state sub-tree. */ + +@@ -89,6 +103,12 @@ struct sm_state_t { + u32 int_trans_id; /* Interrupted transaction. */ + }; + ++struct vc_sm_dma_buf_attachment { ++ struct device *dev; ++ struct sg_table *table; ++ struct list_head list; ++}; ++ + /* ---- Private Variables ----------------------------------------------- */ + + static struct sm_state_t *sm_state; +@@ -172,12 +192,14 @@ static int vc_sm_cma_global_state_show(s + resource->size); + seq_printf(s, " DMABUF %p\n", + resource->dma_buf); +- seq_printf(s, " ATTACH %p\n", +- resource->attach); ++ if (resource->imported) { ++ seq_printf(s, " ATTACH %p\n", ++ resource->import.attach); ++ seq_printf(s, " SGT %p\n", ++ resource->import.sgt); ++ } + seq_printf(s, " SG_TABLE %p\n", + resource->sg_table); +- seq_printf(s, " SGT %p\n", +- resource->sgt); + seq_printf(s, " DMA_ADDR %pad\n", + &resource->dma_addr); + seq_printf(s, " VC_HANDLE %08x\n", +@@ -209,17 +231,33 @@ static void vc_sm_add_resource(struct vc + } + + /* +- * Release an allocation. +- * All refcounting is done via the dma buf object. ++ * Cleans up imported dmabuf. + */ +-static void vc_sm_release_resource(struct vc_sm_buffer *buffer, int force) ++static void vc_sm_clean_up_dmabuf(struct vc_sm_buffer *buffer) + { +- mutex_lock(&sm_state->map_lock); +- mutex_lock(&buffer->lock); ++ if (!buffer->imported) ++ return; + +- pr_debug("[%s]: buffer %p (name %s, size %zu)\n", +- __func__, buffer, buffer->name, buffer->size); ++ /* Handle cleaning up imported dmabufs */ ++ mutex_lock(&buffer->lock); ++ if (buffer->import.sgt) { ++ dma_buf_unmap_attachment(buffer->import.attach, ++ buffer->import.sgt, ++ DMA_BIDIRECTIONAL); ++ buffer->import.sgt = NULL; ++ } ++ if (buffer->import.attach) { ++ dma_buf_detach(buffer->dma_buf, buffer->import.attach); ++ buffer->import.attach = NULL; ++ } ++ mutex_unlock(&buffer->lock); ++} + ++/* ++ * Instructs VPU to decrement the refcount on a buffer. ++ */ ++static void vc_sm_vpu_free(struct vc_sm_buffer *buffer) ++{ + if (buffer->vc_handle && buffer->vpu_state == VPU_MAPPED) { + struct vc_sm_free_t free = { buffer->vc_handle, 0 }; + int status = vc_sm_cma_vchi_free(sm_state->sm_handle, &free, +@@ -230,17 +268,32 @@ static void vc_sm_release_resource(struc + } + + if (sm_state->require_released_callback) { +- /* Need to wait for the VPU to confirm the free */ ++ /* Need to wait for the VPU to confirm the free. */ + + /* Retain a reference on this until the VPU has + * released it + */ + buffer->vpu_state = VPU_UNMAPPING; +- goto defer; ++ } else { ++ buffer->vpu_state = VPU_NOT_MAPPED; ++ buffer->vc_handle = 0; + } +- buffer->vpu_state = VPU_NOT_MAPPED; +- buffer->vc_handle = 0; + } ++} ++ ++/* ++ * Release an allocation. ++ * All refcounting is done via the dma buf object. ++ * ++ * Must be called with the mutex held. The function will either release the ++ * mutex (if defering the release) or destroy it. The caller must therefore not ++ * reuse the buffer on return. ++ */ ++static void vc_sm_release_resource(struct vc_sm_buffer *buffer) ++{ ++ pr_debug("[%s]: buffer %p (name %s, size %zu)\n", ++ __func__, buffer, buffer->name, buffer->size); ++ + if (buffer->vc_handle) { + /* We've sent the unmap request but not had the response. */ + pr_err("[%s]: Waiting for VPU unmap response on %p\n", +@@ -248,45 +301,43 @@ static void vc_sm_release_resource(struc + goto defer; + } + if (buffer->in_use) { +- /* Don't release dmabuf here - we await the release */ ++ /* dmabuf still in use - we await the release */ + pr_err("[%s]: buffer %p is still in use\n", + __func__, buffer); + goto defer; + } + +- /* Handle cleaning up imported dmabufs */ +- if (buffer->sgt) { +- dma_buf_unmap_attachment(buffer->attach, buffer->sgt, +- DMA_BIDIRECTIONAL); +- buffer->sgt = NULL; +- } +- if (buffer->attach) { +- dma_buf_detach(buffer->dma_buf, buffer->attach); +- buffer->attach = NULL; +- } +- +- /* Release the dma_buf (whether ours or imported) */ +- if (buffer->import_dma_buf) { +- dma_buf_put(buffer->import_dma_buf); +- buffer->import_dma_buf = NULL; +- buffer->dma_buf = NULL; +- } else if (buffer->dma_buf) { +- dma_buf_put(buffer->dma_buf); +- buffer->dma_buf = NULL; ++ /* Release the allocation (whether imported dmabuf or CMA allocation) */ ++ if (buffer->imported) { ++ pr_debug("%s: Release imported dmabuf %p\n", __func__, ++ buffer->import.dma_buf); ++ if (buffer->import.dma_buf) ++ dma_buf_put(buffer->import.dma_buf); ++ else ++ pr_err("%s: Imported dmabuf already been put for buf %p\n", ++ __func__, buffer); ++ buffer->import.dma_buf = NULL; ++ } else { ++ if (buffer->sg_table) { ++ /* Our own allocation that we need to dma_unmap_sg */ ++ dma_unmap_sg(&sm_state->pdev->dev, ++ buffer->sg_table->sgl, ++ buffer->sg_table->nents, ++ DMA_BIDIRECTIONAL); ++ } ++ pr_debug("%s: Release our allocation\n", __func__); ++ vc_sm_cma_buffer_free(&buffer->alloc); ++ pr_debug("%s: Release our allocation - done\n", __func__); + } + +- if (buffer->sg_table && !buffer->import_dma_buf) { +- /* Our own allocation that we need to dma_unmap_sg */ +- dma_unmap_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, +- buffer->sg_table->nents, DMA_BIDIRECTIONAL); +- } + +- /* Free the local resource. Start by removing it from the list */ +- buffer->private = NULL; ++ /* Free our buffer. Start by removing it from the list */ ++ mutex_lock(&sm_state->map_lock); + list_del(&buffer->global_buffer_list); ++ mutex_unlock(&sm_state->map_lock); + ++ pr_debug("%s: Release our allocation - done\n", __func__); + mutex_unlock(&buffer->lock); +- mutex_unlock(&sm_state->map_lock); + + mutex_destroy(&buffer->lock); + +@@ -295,7 +346,7 @@ static void vc_sm_release_resource(struc + + defer: + mutex_unlock(&buffer->lock); +- mutex_unlock(&sm_state->map_lock); ++ return; + } + + /* Create support for private data tracking. */ +@@ -317,16 +368,267 @@ static struct vc_sm_privdata_t *vc_sm_cm + return file_data; + } + ++static struct sg_table *dup_sg_table(struct sg_table *table) ++{ ++ struct sg_table *new_table; ++ int ret, i; ++ struct scatterlist *sg, *new_sg; ++ ++ new_table = kzalloc(sizeof(*new_table), GFP_KERNEL); ++ if (!new_table) ++ return ERR_PTR(-ENOMEM); ++ ++ ret = sg_alloc_table(new_table, table->nents, GFP_KERNEL); ++ if (ret) { ++ kfree(new_table); ++ return ERR_PTR(-ENOMEM); ++ } ++ ++ new_sg = new_table->sgl; ++ for_each_sg(table->sgl, sg, table->nents, i) { ++ memcpy(new_sg, sg, sizeof(*sg)); ++ sg->dma_address = 0; ++ new_sg = sg_next(new_sg); ++ } ++ ++ return new_table; ++} ++ ++static void free_duped_table(struct sg_table *table) ++{ ++ sg_free_table(table); ++ kfree(table); ++} ++ ++/* Dma buf operations for use with our own allocations */ ++ ++static int vc_sm_dma_buf_attach(struct dma_buf *dmabuf, ++ struct dma_buf_attachment *attachment) ++ ++{ ++ struct vc_sm_dma_buf_attachment *a; ++ struct sg_table *table; ++ struct vc_sm_buffer *buf = dmabuf->priv; ++ ++ a = kzalloc(sizeof(*a), GFP_KERNEL); ++ if (!a) ++ return -ENOMEM; ++ ++ table = dup_sg_table(buf->sg_table); ++ if (IS_ERR(table)) { ++ kfree(a); ++ return -ENOMEM; ++ } ++ ++ a->table = table; ++ INIT_LIST_HEAD(&a->list); ++ ++ attachment->priv = a; ++ ++ mutex_lock(&buf->lock); ++ list_add(&a->list, &buf->attachments); ++ mutex_unlock(&buf->lock); ++ pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); ++ ++ return 0; ++} ++ ++static void vc_sm_dma_buf_detatch(struct dma_buf *dmabuf, ++ struct dma_buf_attachment *attachment) ++{ ++ struct vc_sm_dma_buf_attachment *a = attachment->priv; ++ struct vc_sm_buffer *buf = dmabuf->priv; ++ ++ pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); ++ free_duped_table(a->table); ++ mutex_lock(&buf->lock); ++ list_del(&a->list); ++ mutex_unlock(&buf->lock); ++ ++ kfree(a); ++} ++ ++static struct sg_table *vc_sm_map_dma_buf(struct dma_buf_attachment *attachment, ++ enum dma_data_direction direction) ++{ ++ struct vc_sm_dma_buf_attachment *a = attachment->priv; ++ struct sg_table *table; ++ ++ table = a->table; ++ ++ if (!dma_map_sg(attachment->dev, table->sgl, table->nents, ++ direction)) ++ return ERR_PTR(-ENOMEM); ++ ++ pr_debug("%s attachment %p\n", __func__, attachment); ++ return table; ++} ++ ++static void vc_sm_unmap_dma_buf(struct dma_buf_attachment *attachment, ++ struct sg_table *table, ++ enum dma_data_direction direction) ++{ ++ pr_debug("%s attachment %p\n", __func__, attachment); ++ dma_unmap_sg(attachment->dev, table->sgl, table->nents, direction); ++} ++ ++static int vc_sm_dmabuf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma) ++{ ++ struct vc_sm_buffer *buf = dmabuf->priv; ++ struct sg_table *table = buf->sg_table; ++ unsigned long addr = vma->vm_start; ++ unsigned long offset = vma->vm_pgoff * PAGE_SIZE; ++ struct scatterlist *sg; ++ int i; ++ int ret = 0; ++ ++ pr_debug("%s dmabuf %p, buf %p, vm_start %08lX\n", __func__, dmabuf, ++ buf, addr); ++ ++ mutex_lock(&buf->lock); ++ ++ /* now map it to userspace */ ++ for_each_sg(table->sgl, sg, table->nents, i) { ++ struct page *page = sg_page(sg); ++ unsigned long remainder = vma->vm_end - addr; ++ unsigned long len = sg->length; ++ ++ if (offset >= sg->length) { ++ offset -= sg->length; ++ continue; ++ } else if (offset) { ++ page += offset / PAGE_SIZE; ++ len = sg->length - offset; ++ offset = 0; ++ } ++ len = min(len, remainder); ++ ret = remap_pfn_range(vma, addr, page_to_pfn(page), len, ++ vma->vm_page_prot); ++ if (ret) ++ break; ++ addr += len; ++ if (addr >= vma->vm_end) ++ break; ++ } ++ mutex_unlock(&buf->lock); ++ ++ if (ret) ++ pr_err("%s: failure mapping buffer to userspace\n", ++ __func__); ++ ++ return ret; ++} ++ ++static void vc_sm_dma_buf_release(struct dma_buf *dmabuf) ++{ ++ struct vc_sm_buffer *buffer; ++ ++ if (!dmabuf) ++ return; ++ ++ buffer = (struct vc_sm_buffer *)dmabuf->priv; ++ ++ mutex_lock(&buffer->lock); ++ ++ pr_debug("%s dmabuf %p, buffer %p\n", __func__, dmabuf, buffer); ++ ++ buffer->in_use = 0; ++ ++ /* Unmap on the VPU */ ++ vc_sm_vpu_free(buffer); ++ pr_debug("%s vpu_free done\n", __func__); ++ ++ /* Unmap our dma_buf object (the vc_sm_buffer remains until released ++ * on the VPU). ++ */ ++ vc_sm_clean_up_dmabuf(buffer); ++ pr_debug("%s clean_up dmabuf done\n", __func__); ++ ++ vc_sm_release_resource(buffer); ++ pr_debug("%s done\n", __func__); ++} ++ ++static int vc_sm_dma_buf_begin_cpu_access(struct dma_buf *dmabuf, ++ enum dma_data_direction direction) ++{ ++ struct vc_sm_buffer *buf; ++ struct vc_sm_dma_buf_attachment *a; ++ ++ if (!dmabuf) ++ return -EFAULT; ++ ++ buf = dmabuf->priv; ++ if (!buf) ++ return -EFAULT; ++ ++ mutex_lock(&buf->lock); ++ ++ list_for_each_entry(a, &buf->attachments, list) { ++ dma_sync_sg_for_cpu(a->dev, a->table->sgl, a->table->nents, ++ direction); ++ } ++ mutex_unlock(&buf->lock); ++ ++ return 0; ++} ++ ++static int vc_sm_dma_buf_end_cpu_access(struct dma_buf *dmabuf, ++ enum dma_data_direction direction) ++{ ++ struct vc_sm_buffer *buf; ++ struct vc_sm_dma_buf_attachment *a; ++ ++ if (!dmabuf) ++ return -EFAULT; ++ buf = dmabuf->priv; ++ if (!buf) ++ return -EFAULT; ++ ++ mutex_lock(&buf->lock); ++ ++ list_for_each_entry(a, &buf->attachments, list) { ++ dma_sync_sg_for_device(a->dev, a->table->sgl, a->table->nents, ++ direction); ++ } ++ mutex_unlock(&buf->lock); ++ ++ return 0; ++} ++ ++static void *vc_sm_dma_buf_kmap(struct dma_buf *dmabuf, unsigned long offset) ++{ ++ /* FIXME */ ++ return NULL; ++} ++ ++static void vc_sm_dma_buf_kunmap(struct dma_buf *dmabuf, unsigned long offset, ++ void *ptr) ++{ ++ /* FIXME */ ++} ++ ++static const struct dma_buf_ops dma_buf_ops = { ++ .map_dma_buf = vc_sm_map_dma_buf, ++ .unmap_dma_buf = vc_sm_unmap_dma_buf, ++ .mmap = vc_sm_dmabuf_mmap, ++ .release = vc_sm_dma_buf_release, ++ .attach = vc_sm_dma_buf_attach, ++ .detach = vc_sm_dma_buf_detatch, ++ .begin_cpu_access = vc_sm_dma_buf_begin_cpu_access, ++ .end_cpu_access = vc_sm_dma_buf_end_cpu_access, ++ .map = vc_sm_dma_buf_kmap, ++ .unmap = vc_sm_dma_buf_kunmap, ++}; + /* Dma_buf operations for chaining through to an imported dma_buf */ + static + int vc_sm_import_dma_buf_attach(struct dma_buf *dmabuf, + struct dma_buf_attachment *attachment) + { +- struct vc_sm_buffer *res = dmabuf->priv; ++ struct vc_sm_buffer *buf = dmabuf->priv; + +- if (!res->import_dma_buf) ++ if (!buf->imported) + return -EINVAL; +- return res->import_dma_buf->ops->attach(res->import_dma_buf, ++ return buf->import.dma_buf->ops->attach(buf->import.dma_buf, + attachment); + } + +@@ -334,22 +636,23 @@ static + void vc_sm_import_dma_buf_detatch(struct dma_buf *dmabuf, + struct dma_buf_attachment *attachment) + { +- struct vc_sm_buffer *res = dmabuf->priv; ++ struct vc_sm_buffer *buf = dmabuf->priv; + +- if (!res->import_dma_buf) ++ if (!buf->imported) + return; +- res->import_dma_buf->ops->detach(res->import_dma_buf, attachment); ++ buf->import.dma_buf->ops->detach(buf->import.dma_buf, attachment); + } + + static + struct sg_table *vc_sm_import_map_dma_buf(struct dma_buf_attachment *attachment, + enum dma_data_direction direction) + { +- struct vc_sm_buffer *res = attachment->dmabuf->priv; ++ struct vc_sm_buffer *buf = attachment->dmabuf->priv; + +- if (!res->import_dma_buf) ++ if (!buf->imported) + return NULL; +- return res->import_dma_buf->ops->map_dma_buf(attachment, direction); ++ return buf->import.dma_buf->ops->map_dma_buf(attachment, ++ direction); + } + + static +@@ -357,87 +660,88 @@ void vc_sm_import_unmap_dma_buf(struct d + struct sg_table *table, + enum dma_data_direction direction) + { +- struct vc_sm_buffer *res = attachment->dmabuf->priv; ++ struct vc_sm_buffer *buf = attachment->dmabuf->priv; + +- if (!res->import_dma_buf) ++ if (!buf->imported) + return; +- res->import_dma_buf->ops->unmap_dma_buf(attachment, table, direction); ++ buf->import.dma_buf->ops->unmap_dma_buf(attachment, table, direction); + } + + static + int vc_sm_import_dmabuf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma) + { +- struct vc_sm_buffer *res = dmabuf->priv; ++ struct vc_sm_buffer *buf = dmabuf->priv; + +- pr_debug("%s: mmap dma_buf %p, res %p, imported db %p\n", __func__, +- dmabuf, res, res->import_dma_buf); +- if (!res->import_dma_buf) { ++ pr_debug("%s: mmap dma_buf %p, buf %p, imported db %p\n", __func__, ++ dmabuf, buf, buf->import.dma_buf); ++ if (!buf->imported) { + pr_err("%s: mmap dma_buf %p- not an imported buffer\n", + __func__, dmabuf); + return -EINVAL; + } +- return res->import_dma_buf->ops->mmap(res->import_dma_buf, vma); ++ return buf->import.dma_buf->ops->mmap(buf->import.dma_buf, vma); + } + + static + void vc_sm_import_dma_buf_release(struct dma_buf *dmabuf) + { +- struct vc_sm_buffer *res = dmabuf->priv; ++ struct vc_sm_buffer *buf = dmabuf->priv; + + pr_debug("%s: Relasing dma_buf %p\n", __func__, dmabuf); +- if (!res->import_dma_buf) ++ mutex_lock(&buf->lock); ++ if (!buf->imported) + return; + +- res->in_use = 0; ++ buf->in_use = 0; + +- vc_sm_release_resource(res, 0); ++ vc_sm_vpu_free(buf); ++ ++ vc_sm_release_resource(buf); + } + + static + void *vc_sm_import_dma_buf_kmap(struct dma_buf *dmabuf, + unsigned long offset) + { +- struct vc_sm_buffer *res = dmabuf->priv; ++ struct vc_sm_buffer *buf = dmabuf->priv; + +- if (!res->import_dma_buf) ++ if (!buf->imported) + return NULL; +- return res->import_dma_buf->ops->map(res->import_dma_buf, +- offset); ++ return buf->import.dma_buf->ops->map(buf->import.dma_buf, offset); + } + + static + void vc_sm_import_dma_buf_kunmap(struct dma_buf *dmabuf, + unsigned long offset, void *ptr) + { +- struct vc_sm_buffer *res = dmabuf->priv; ++ struct vc_sm_buffer *buf = dmabuf->priv; + +- if (!res->import_dma_buf) ++ if (!buf->imported) + return; +- res->import_dma_buf->ops->unmap(res->import_dma_buf, +- offset, ptr); ++ buf->import.dma_buf->ops->unmap(buf->import.dma_buf, offset, ptr); + } + + static + int vc_sm_import_dma_buf_begin_cpu_access(struct dma_buf *dmabuf, + enum dma_data_direction direction) + { +- struct vc_sm_buffer *res = dmabuf->priv; ++ struct vc_sm_buffer *buf = dmabuf->priv; + +- if (!res->import_dma_buf) ++ if (!buf->imported) + return -EINVAL; +- return res->import_dma_buf->ops->begin_cpu_access(res->import_dma_buf, +- direction); ++ return buf->import.dma_buf->ops->begin_cpu_access(buf->import.dma_buf, ++ direction); + } + + static + int vc_sm_import_dma_buf_end_cpu_access(struct dma_buf *dmabuf, + enum dma_data_direction direction) + { +- struct vc_sm_buffer *res = dmabuf->priv; ++ struct vc_sm_buffer *buf = dmabuf->priv; + +- if (!res->import_dma_buf) ++ if (!buf->imported) + return -EINVAL; +- return res->import_dma_buf->ops->end_cpu_access(res->import_dma_buf, ++ return buf->import.dma_buf->ops->end_cpu_access(buf->import.dma_buf, + direction); + } + +@@ -516,9 +820,8 @@ vc_sm_cma_import_dmabuf_internal(struct + memcpy(import.name, VC_SM_RESOURCE_NAME_DEFAULT, + sizeof(VC_SM_RESOURCE_NAME_DEFAULT)); + +- pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %pad, size %u\n", +- __func__, import.name, import.type, &dma_addr, +- import.size); ++ pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %pad, size %u.\n", ++ __func__, import.name, import.type, &dma_addr, import.size); + + /* Allocate the videocore buffer. */ + status = vc_sm_cma_vchi_import(sm_state->sm_handle, &import, &result, +@@ -548,12 +851,14 @@ vc_sm_cma_import_dmabuf_internal(struct + buffer->size = import.size; + buffer->vpu_state = VPU_MAPPED; + +- buffer->import_dma_buf = dma_buf; ++ buffer->imported = 1; ++ buffer->import.dma_buf = dma_buf; + +- buffer->attach = attach; +- buffer->sgt = sgt; ++ buffer->import.attach = attach; ++ buffer->import.sgt = sgt; + buffer->dma_addr = dma_addr; + buffer->in_use = 1; ++ buffer->kernel_id = import.kernel_id; + + /* + * We're done - we need to export a new dmabuf chaining through most +@@ -594,6 +899,91 @@ error: + return ret; + } + ++static int vc_sm_cma_vpu_alloc(u32 size, uint32_t align, const char *name, ++ u32 mem_handle, struct vc_sm_buffer **ret_buffer) ++{ ++ DEFINE_DMA_BUF_EXPORT_INFO(exp_info); ++ struct vc_sm_buffer *buffer = NULL; ++ int aligned_size; ++ int ret = 0; ++ ++ /* Align to the user requested align */ ++ aligned_size = ALIGN(size, align); ++ /* and then to a page boundary */ ++ aligned_size = PAGE_ALIGN(aligned_size); ++ ++ if (!aligned_size) ++ return -EINVAL; ++ ++ /* Allocate local buffer to track this allocation. */ ++ buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); ++ if (!buffer) ++ return -ENOMEM; ++ ++ mutex_init(&buffer->lock); ++ ++ if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, ++ aligned_size)) { ++ pr_err("[%s]: cma alloc of %d bytes failed\n", ++ __func__, aligned_size); ++ ret = -ENOMEM; ++ goto error; ++ } ++ buffer->sg_table = buffer->alloc.sg_table; ++ ++ pr_debug("[%s]: cma alloc of %d bytes success\n", ++ __func__, aligned_size); ++ ++ if (dma_map_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, ++ buffer->sg_table->nents, DMA_BIDIRECTIONAL) <= 0) { ++ pr_err("[%s]: dma_map_sg failed\n", __func__); ++ goto error; ++ } ++ ++ INIT_LIST_HEAD(&buffer->attachments); ++ ++ memcpy(buffer->name, name, ++ min(sizeof(buffer->name), strlen(name))); ++ ++ exp_info.ops = &dma_buf_ops; ++ exp_info.size = aligned_size; ++ exp_info.flags = O_RDWR; ++ exp_info.priv = buffer; ++ ++ buffer->dma_buf = dma_buf_export(&exp_info); ++ if (IS_ERR(buffer->dma_buf)) { ++ ret = PTR_ERR(buffer->dma_buf); ++ goto error; ++ } ++ buffer->dma_addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); ++ if ((buffer->dma_addr & 0xC0000000) != 0xC0000000) { ++ pr_err("%s: Expecting an uncached alias for dma_addr %pad\n", ++ __func__, &buffer->dma_addr); ++ buffer->dma_addr |= 0xC0000000; ++ } ++ buffer->private = sm_state->vpu_allocs; ++ ++ buffer->vc_handle = mem_handle; ++ buffer->vpu_state = VPU_MAPPED; ++ buffer->vpu_allocated = 1; ++ buffer->size = size; ++ /* ++ * Create an ID that will be passed along with our message so ++ * that when we service the release reply, we can look up which ++ * resource is being released. ++ */ ++ buffer->kernel_id = get_kernel_id(buffer); ++ ++ vc_sm_add_resource(sm_state->vpu_allocs, buffer); ++ ++ *ret_buffer = buffer; ++ return 0; ++error: ++ if (buffer) ++ vc_sm_release_resource(buffer); ++ return ret; ++} ++ + static void + vc_sm_vpu_event(struct sm_instance *instance, struct vc_sm_result_t *reply, + int reply_len) +@@ -612,21 +1002,61 @@ vc_sm_vpu_event(struct sm_instance *inst + struct vc_sm_released *release = (struct vc_sm_released *)reply; + struct vc_sm_buffer *buffer = + lookup_kernel_id(release->kernel_id); ++ if (!buffer) { ++ pr_err("%s: VC released a buffer that is already released, kernel_id %d\n", ++ __func__, release->kernel_id); ++ break; ++ } ++ mutex_lock(&buffer->lock); + +- /* +- * FIXME: Need to check buffer is still valid and allocated +- * before continuing +- */ + pr_debug("%s: Released addr %08x, size %u, id %08x, mem_handle %08x\n", + __func__, release->addr, release->size, + release->kernel_id, release->vc_handle); +- mutex_lock(&buffer->lock); ++ + buffer->vc_handle = 0; + buffer->vpu_state = VPU_NOT_MAPPED; +- mutex_unlock(&buffer->lock); + free_kernel_id(release->kernel_id); + +- vc_sm_release_resource(buffer, 0); ++ if (buffer->vpu_allocated) { ++ /* VPU allocation, so release the dmabuf which will ++ * trigger the clean up. ++ */ ++ mutex_unlock(&buffer->lock); ++ dma_buf_put(buffer->dma_buf); ++ } else { ++ vc_sm_release_resource(buffer); ++ } ++ } ++ break; ++ case VC_SM_MSG_TYPE_VC_MEM_REQUEST: ++ { ++ struct vc_sm_buffer *buffer = NULL; ++ struct vc_sm_vc_mem_request *req = ++ (struct vc_sm_vc_mem_request *)reply; ++ struct vc_sm_vc_mem_request_result reply; ++ int ret; ++ ++ pr_debug("%s: Request %u bytes of memory, align %d name %s, trans_id %08x\n", ++ __func__, req->size, req->align, req->name, ++ req->trans_id); ++ ret = vc_sm_cma_vpu_alloc(req->size, req->align, req->name, ++ req->vc_handle, &buffer); ++ ++ reply.trans_id = req->trans_id; ++ if (!ret) { ++ reply.addr = buffer->dma_addr; ++ reply.kernel_id = buffer->kernel_id; ++ pr_debug("%s: Allocated resource buffer %p, addr %pad\n", ++ __func__, buffer, &buffer->dma_addr); ++ } else { ++ pr_err("%s: Allocation failed size %u, name %s, vc_handle %u\n", ++ __func__, req->size, req->name, req->vc_handle); ++ reply.addr = 0; ++ reply.kernel_id = 0; ++ } ++ vc_sm_vchi_client_vc_mem_req_reply(sm_state->sm_handle, &reply, ++ &sm_state->int_trans_id); ++ break; + } + break; + default: +@@ -645,6 +1075,14 @@ static void vc_sm_connected_init(void) + + pr_info("[%s]: start\n", __func__); + ++ if (vc_sm_cma_add_heaps(&sm_state->cma_heap) || ++ !sm_state->cma_heap) { ++ pr_err("[%s]: failed to initialise CMA heaps\n", ++ __func__); ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ + /* + * Initialize and create a VCHI connection for the shared memory service + * running on videocore. +@@ -696,7 +1134,7 @@ static void vc_sm_connected_init(void) + goto err_remove_shared_memory; + } + +- version.version = 1; ++ version.version = 2; + ret = vc_sm_cma_vchi_client_version(sm_state->sm_handle, &version, + &version_result, + &sm_state->int_trans_id); +@@ -768,7 +1206,7 @@ static int bcm2835_vc_sm_cma_remove(stru + int vc_sm_cma_int_handle(void *handle) + { + struct dma_buf *dma_buf = (struct dma_buf *)handle; +- struct vc_sm_buffer *res; ++ struct vc_sm_buffer *buf; + + /* Validate we can work with this device. */ + if (!sm_state || !handle) { +@@ -776,8 +1214,8 @@ int vc_sm_cma_int_handle(void *handle) + return 0; + } + +- res = (struct vc_sm_buffer *)dma_buf->priv; +- return res->vc_handle; ++ buf = (struct vc_sm_buffer *)dma_buf->priv; ++ return buf->vc_handle; + } + EXPORT_SYMBOL_GPL(vc_sm_cma_int_handle); + +@@ -804,7 +1242,7 @@ EXPORT_SYMBOL_GPL(vc_sm_cma_free); + int vc_sm_cma_import_dmabuf(struct dma_buf *src_dmabuf, void **handle) + { + struct dma_buf *new_dma_buf; +- struct vc_sm_buffer *res; ++ struct vc_sm_buffer *buf; + int ret; + + /* Validate we can work with this device. */ +@@ -818,7 +1256,7 @@ int vc_sm_cma_import_dmabuf(struct dma_b + + if (!ret) { + pr_debug("%s: imported to ptr %p\n", __func__, new_dma_buf); +- res = (struct vc_sm_buffer *)new_dma_buf->priv; ++ buf = (struct vc_sm_buffer *)new_dma_buf->priv; + + /* Assign valid handle at this time.*/ + *handle = new_dma_buf; +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h +@@ -21,6 +21,8 @@ + #include + #include + ++#include "vc_sm_cma.h" ++ + #define VC_SM_MAX_NAME_LEN 32 + + enum vc_sm_vpu_mapping_state { +@@ -29,31 +31,51 @@ enum vc_sm_vpu_mapping_state { + VPU_UNMAPPING + }; + ++struct vc_sm_imported { ++ struct dma_buf *dma_buf; ++ struct dma_buf_attachment *attach; ++ struct sg_table *sgt; ++}; ++ + struct vc_sm_buffer { + struct list_head global_buffer_list; /* Global list of buffers. */ + ++ /* Index in the kernel_id idr so that we can find the ++ * mmal_msg_context again when servicing the VCHI reply. ++ */ ++ int kernel_id; ++ + size_t size; + + /* Lock over all the following state for this buffer */ + struct mutex lock; +- struct sg_table *sg_table; + struct list_head attachments; + + char name[VC_SM_MAX_NAME_LEN]; + + int in_use:1; /* Kernel is still using this resource */ ++ int imported:1; /* Imported dmabuf */ ++ ++ struct sg_table *sg_table; + + enum vc_sm_vpu_mapping_state vpu_state; + u32 vc_handle; /* VideoCore handle for this buffer */ ++ int vpu_allocated; /* ++ * The VPU made this allocation. Release the ++ * local dma_buf when the VPU releases the ++ * resource. ++ */ + + /* DMABUF related fields */ +- struct dma_buf *import_dma_buf; + struct dma_buf *dma_buf; +- struct dma_buf_attachment *attach; +- struct sg_table *sgt; + dma_addr_t dma_addr; + + struct vc_sm_privdata_t *private; ++ ++ union { ++ struct vc_sm_cma_alloc_data alloc; ++ struct vc_sm_imported import; ++ }; + }; + + #endif +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c +@@ -0,0 +1,99 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * VideoCore Shared Memory CMA allocator ++ * ++ * Copyright: 2018, Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Android ION allocator ++ * Copyright (C) Linaro 2012 ++ * Author: for ST-Ericsson. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "vc_sm_cma.h" ++ ++/* CMA heap operations functions */ ++int vc_sm_cma_buffer_allocate(struct cma *cma_heap, ++ struct vc_sm_cma_alloc_data *buffer, ++ unsigned long len) ++{ ++ /* len should already be page aligned */ ++ unsigned long num_pages = len / PAGE_SIZE; ++ struct sg_table *table; ++ struct page *pages; ++ int ret; ++ ++ pages = cma_alloc(cma_heap, num_pages, 0, GFP_KERNEL); ++ if (!pages) ++ return -ENOMEM; ++ ++ table = kmalloc(sizeof(*table), GFP_KERNEL); ++ if (!table) ++ goto err; ++ ++ ret = sg_alloc_table(table, 1, GFP_KERNEL); ++ if (ret) ++ goto free_mem; ++ ++ sg_set_page(table->sgl, pages, len, 0); ++ ++ buffer->priv_virt = pages; ++ buffer->sg_table = table; ++ buffer->cma_heap = cma_heap; ++ buffer->num_pages = num_pages; ++ return 0; ++ ++free_mem: ++ kfree(table); ++err: ++ cma_release(cma_heap, pages, num_pages); ++ return -ENOMEM; ++} ++ ++void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer) ++{ ++ struct cma *cma_heap = buffer->cma_heap; ++ struct page *pages = buffer->priv_virt; ++ ++ /* release memory */ ++ if (cma_heap) ++ cma_release(cma_heap, pages, buffer->num_pages); ++ ++ /* release sg table */ ++ if (buffer->sg_table) { ++ sg_free_table(buffer->sg_table); ++ kfree(buffer->sg_table); ++ buffer->sg_table = NULL; ++ } ++} ++ ++int __vc_sm_cma_add_heaps(struct cma *cma, void *priv) ++{ ++ struct cma **heap = (struct cma **)priv; ++ const char *name = cma_get_name(cma); ++ ++ if (!(*heap)) { ++ phys_addr_t phys_addr = cma_get_base(cma); ++ ++ pr_debug("%s: Adding cma heap %s (start %pap, size %lu) for use by vcsm\n", ++ __func__, name, &phys_addr, cma_get_size(cma)); ++ *heap = cma; ++ } else { ++ pr_err("%s: Ignoring heap %s as already set\n", ++ __func__, name); ++ } ++ ++ return 0; ++} ++ ++int vc_sm_cma_add_heaps(struct cma **cma_heap) ++{ ++ cma_for_each_area(__vc_sm_cma_add_heaps, cma_heap); ++ return 0; ++} +--- /dev/null ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h +@@ -0,0 +1,39 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++/* ++ * VideoCore Shared Memory CMA allocator ++ * ++ * Copyright: 2018, Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Android ION allocator ++ * Copyright (C) Linaro 2012 ++ * Author: for ST-Ericsson. ++ * ++ * This software is licensed under the terms of the GNU General Public ++ * License version 2, as published by the Free Software Foundation, and ++ * may be copied, distributed, and modified under those terms. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++#ifndef VC_SM_CMA_H ++#define VC_SM_CMA_H ++ ++struct vc_sm_cma_alloc_data { ++ struct cma *cma_heap; ++ unsigned long num_pages; ++ void *priv_virt; ++ struct sg_table *sg_table; ++}; ++ ++int vc_sm_cma_buffer_allocate(struct cma *cma_heap, ++ struct vc_sm_cma_alloc_data *buffer, ++ unsigned long len); ++void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer); ++ ++int vc_sm_cma_add_heaps(struct cma **cma_heap); ++ ++#endif +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c +@@ -500,3 +500,13 @@ int vc_sm_cma_vchi_client_version(struct + msg, sizeof(*msg), NULL, 0, + cur_trans_id, 0); + } ++ ++int vc_sm_vchi_client_vc_mem_req_reply(struct sm_instance *handle, ++ struct vc_sm_vc_mem_request_result *msg, ++ uint32_t *cur_trans_id) ++{ ++ return vc_sm_cma_vchi_send_msg(handle, ++ VC_SM_MSG_TYPE_VC_MEM_REQUEST_REPLY, ++ msg, sizeof(*msg), 0, 0, cur_trans_id, ++ 0); ++} +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.h ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.h +@@ -56,4 +56,8 @@ int vc_sm_cma_vchi_client_version(struct + struct vc_sm_result_t *result, + u32 *cur_trans_id); + ++int vc_sm_vchi_client_vc_mem_req_reply(struct sm_instance *handle, ++ struct vc_sm_vc_mem_request_result *msg, ++ uint32_t *cur_trans_id); ++ + #endif /* __VC_SM_CMA_VCHI_H__INCLUDED__ */ +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_defs.h ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_defs.h +@@ -264,6 +264,8 @@ struct vc_sm_vc_mem_request { + u32 align; + /* resource name (for easier tracking) */ + char name[VC_SM_RESOURCE_NAME]; ++ /* VPU handle for the resource */ ++ u32 vc_handle; + }; + + /* Response from the kernel to provide the VPU with some memory */ diff --git a/target/linux/brcm2708/patches-4.19/950-0577-drm-v3d-Don-t-try-to-set-OVRTMUOUT-on-V3D-4.x.patch b/target/linux/brcm2708/patches-4.19/950-0577-drm-v3d-Don-t-try-to-set-OVRTMUOUT-on-V3D-4.x.patch deleted file mode 100644 index 3feec5f58d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0577-drm-v3d-Don-t-try-to-set-OVRTMUOUT-on-V3D-4.x.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 8011a92f6eabd682e62e268bcd80b45ce3f06af4 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Tue, 16 Oct 2018 10:13:41 -0700 -Subject: [PATCH 577/806] drm/v3d: Don't try to set OVRTMUOUT on V3D 4.x. - -The old field is gone and the register now has a different field, -QRMAXCNT for how many TMU requests get serviced before thread switch. -We were accidentally reducing it from its default of 0x3 (4 requests) -to 0x0 (1). - -v2: Skip setting the reg at all on 4.x, instead of trying to update - only the old field. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/v3d/v3d_gem.c | 3 ++- - drivers/gpu/drm/v3d/v3d_regs.h | 2 ++ - 2 files changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -25,7 +25,8 @@ v3d_init_core(struct v3d_dev *v3d, int c - * type. If you want the default behavior, you can still put - * "2" in the indirect texture state's output_type field. - */ -- V3D_CORE_WRITE(core, V3D_CTL_MISCCFG, V3D_MISCCFG_OVRTMUOUT); -+ if (v3d->ver < 40) -+ V3D_CORE_WRITE(core, V3D_CTL_MISCCFG, V3D_MISCCFG_OVRTMUOUT); - - /* Whenever we flush the L2T cache, we always want to flush - * the whole thing. ---- a/drivers/gpu/drm/v3d/v3d_regs.h -+++ b/drivers/gpu/drm/v3d/v3d_regs.h -@@ -216,6 +216,8 @@ - # define V3D_IDENT2_BCG_INT BIT(28) - - #define V3D_CTL_MISCCFG 0x00018 -+# define V3D_CTL_MISCCFG_QRMAXCNT_MASK V3D_MASK(3, 1) -+# define V3D_CTL_MISCCFG_QRMAXCNT_SHIFT 1 - # define V3D_MISCCFG_OVRTMUOUT BIT(0) - - #define V3D_CTL_L2CACTL 0x00020 diff --git a/target/linux/brcm2708/patches-4.19/950-0577-staging-vc-sm-cma-Update-TODO.patch b/target/linux/brcm2708/patches-4.19/950-0577-staging-vc-sm-cma-Update-TODO.patch new file mode 100644 index 0000000000..c4d303a57d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0577-staging-vc-sm-cma-Update-TODO.patch @@ -0,0 +1,20 @@ +From 753e73267994a88505b6883cdf463d1d0bacf090 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 11 Mar 2019 16:38:32 +0000 +Subject: [PATCH] staging: vc-sm-cma: Update TODO. + +The driver is already a platform driver, so that can be +deleted from the TODO. +There are no known issues that need to be resolved. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/TODO | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/TODO ++++ b/drivers/staging/vc04_services/vc-sm-cma/TODO +@@ -1,2 +1 @@ +-1) Convert to a platform driver. +- ++No currently outstanding tasks except some clean-up. diff --git a/target/linux/brcm2708/patches-4.19/950-0578-drm-v3d-Make-sure-the-GPU-is-on-when-measuring-clock.patch b/target/linux/brcm2708/patches-4.19/950-0578-drm-v3d-Make-sure-the-GPU-is-on-when-measuring-clock.patch deleted file mode 100644 index a7840c97ca..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0578-drm-v3d-Make-sure-the-GPU-is-on-when-measuring-clock.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 19846d53c32be7c9d8d46b369910374c5ea9b9d5 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 14 Jan 2019 17:26:04 -0800 -Subject: [PATCH 578/806] drm/v3d: Make sure the GPU is on when measuring - clocks. - -You'll get garbage measurements if the registers always read back -0xdeadbeef - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/v3d/v3d_debugfs.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/gpu/drm/v3d/v3d_debugfs.c -+++ b/drivers/gpu/drm/v3d/v3d_debugfs.c -@@ -187,6 +187,11 @@ static int v3d_measure_clock(struct seq_ - uint32_t cycles; - int core = 0; - int measure_ms = 1000; -+ int ret; -+ -+ ret = pm_runtime_get_sync(v3d->dev); -+ if (ret < 0) -+ return ret; - - if (v3d->ver >= 40) { - V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3, -@@ -210,6 +215,9 @@ static int v3d_measure_clock(struct seq_ - cycles / (measure_ms * 1000), - (cycles / (measure_ms * 100)) % 10); - -+ pm_runtime_mark_last_busy(v3d->dev); -+ pm_runtime_put_autosuspend(v3d->dev); -+ - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0578-staging-vc-sm-cma-Add-in-userspace-allocation-API.patch b/target/linux/brcm2708/patches-4.19/950-0578-staging-vc-sm-cma-Add-in-userspace-allocation-API.patch new file mode 100644 index 0000000000..53a936e993 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0578-staging-vc-sm-cma-Add-in-userspace-allocation-API.patch @@ -0,0 +1,675 @@ +From 549c0266e570da686f19e4435d76411cd7137954 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 11 Mar 2019 16:35:23 +0000 +Subject: [PATCH] staging: vc-sm-cma: Add in userspace allocation API + +Replacing the functionality from the older vc-sm driver, +add in a userspace API that allows allocation of buffers, +and importing of dma-bufs. +The driver hands out dma-buf fds, therefore much of the +handling around lifespan and odd mmaps from the old driver +goes away. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/vc-sm-cma/vc_sm.c | 371 ++++++++++++++++-- + .../vc04_services/vc-sm-cma/vc_sm_cma.c | 3 +- + .../vc04_services/vc-sm-cma/vc_sm_cma.h | 2 +- + include/linux/broadcom/vc_sm_cma_ioctl.h | 87 ++++ + 4 files changed, 435 insertions(+), 28 deletions(-) + create mode 100644 include/linux/broadcom/vc_sm_cma_ioctl.h + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -36,6 +36,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -52,6 +53,7 @@ + #include "vc_sm.h" + #include "vc_sm_cma.h" + #include "vc_sm_knl.h" ++#include + + /* ---- Private Constants and Types --------------------------------------- */ + +@@ -83,6 +85,8 @@ struct sm_pde_t { + struct sm_state_t { + struct platform_device *pdev; + ++ struct miscdevice misc_dev; ++ + struct sm_instance *sm_handle; /* Handle for videocore service. */ + struct cma *cma_heap; + +@@ -346,7 +350,6 @@ static void vc_sm_release_resource(struc + + defer: + mutex_unlock(&buffer->lock); +- return; + } + + /* Create support for private data tracking. */ +@@ -381,7 +384,7 @@ static struct sg_table *dup_sg_table(str + ret = sg_alloc_table(new_table, table->nents, GFP_KERNEL); + if (ret) { + kfree(new_table); +- return ERR_PTR(-ENOMEM); ++ return ERR_PTR(ret); + } + + new_sg = new_table->sgl; +@@ -417,7 +420,7 @@ static int vc_sm_dma_buf_attach(struct d + table = dup_sg_table(buf->sg_table); + if (IS_ERR(table)) { + kfree(a); +- return -ENOMEM; ++ return PTR_ERR(table); + } + + a->table = table; +@@ -433,8 +436,8 @@ static int vc_sm_dma_buf_attach(struct d + return 0; + } + +-static void vc_sm_dma_buf_detatch(struct dma_buf *dmabuf, +- struct dma_buf_attachment *attachment) ++static void vc_sm_dma_buf_detach(struct dma_buf *dmabuf, ++ struct dma_buf_attachment *attachment) + { + struct vc_sm_dma_buf_attachment *a = attachment->priv; + struct vc_sm_buffer *buf = dmabuf->priv; +@@ -544,6 +547,9 @@ static void vc_sm_dma_buf_release(struct + vc_sm_clean_up_dmabuf(buffer); + pr_debug("%s clean_up dmabuf done\n", __func__); + ++ /* buffer->lock will be destroyed by vc_sm_release_resource if finished ++ * with, otherwise unlocked. Do NOT unlock here. ++ */ + vc_sm_release_resource(buffer); + pr_debug("%s done\n", __func__); + } +@@ -613,7 +619,7 @@ static const struct dma_buf_ops dma_buf_ + .mmap = vc_sm_dmabuf_mmap, + .release = vc_sm_dma_buf_release, + .attach = vc_sm_dma_buf_attach, +- .detach = vc_sm_dma_buf_detatch, ++ .detach = vc_sm_dma_buf_detach, + .begin_cpu_access = vc_sm_dma_buf_begin_cpu_access, + .end_cpu_access = vc_sm_dma_buf_end_cpu_access, + .map = vc_sm_dma_buf_kmap, +@@ -762,6 +768,7 @@ static const struct dma_buf_ops dma_buf_ + int + vc_sm_cma_import_dmabuf_internal(struct vc_sm_privdata_t *private, + struct dma_buf *dma_buf, ++ int fd, + struct dma_buf **imported_buf) + { + DEFINE_DMA_BUF_EXPORT_INFO(exp_info); +@@ -775,10 +782,15 @@ vc_sm_cma_import_dmabuf_internal(struct + int status; + + /* Setup our allocation parameters */ +- pr_debug("%s: importing dma_buf %p\n", __func__, dma_buf); ++ pr_debug("%s: importing dma_buf %p/fd %d\n", __func__, dma_buf, fd); + +- get_dma_buf(dma_buf); +- dma_buf = dma_buf; ++ if (fd < 0) ++ get_dma_buf(dma_buf); ++ else ++ dma_buf = dma_buf_get(fd); ++ ++ if (!dma_buf) ++ return -EINVAL; + + attach = dma_buf_attach(dma_buf, &sm_state->pdev->dev); + if (IS_ERR(attach)) { +@@ -921,6 +933,10 @@ static int vc_sm_cma_vpu_alloc(u32 size, + return -ENOMEM; + + mutex_init(&buffer->lock); ++ /* Acquire the mutex as vc_sm_release_resource will release it in the ++ * error path. ++ */ ++ mutex_lock(&buffer->lock); + + if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, + aligned_size)) { +@@ -976,6 +992,8 @@ static int vc_sm_cma_vpu_alloc(u32 size, + + vc_sm_add_resource(sm_state->vpu_allocs, buffer); + ++ mutex_unlock(&buffer->lock); ++ + *ret_buffer = buffer; + return 0; + error: +@@ -1065,6 +1083,297 @@ vc_sm_vpu_event(struct sm_instance *inst + } + } + ++/* Userspace handling */ ++/* ++ * Open the device. Creates a private state to help track all allocation ++ * associated with this device. ++ */ ++static int vc_sm_cma_open(struct inode *inode, struct file *file) ++{ ++ /* Make sure the device was started properly. */ ++ if (!sm_state) { ++ pr_err("[%s]: invalid device\n", __func__); ++ return -EPERM; ++ } ++ ++ file->private_data = vc_sm_cma_create_priv_data(current->tgid); ++ if (!file->private_data) { ++ pr_err("[%s]: failed to create data tracker\n", __func__); ++ ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++/* ++ * Close the vcsm-cma device. ++ * All allocations are file descriptors to the dmabuf objects, so we will get ++ * the clean up request on those as those are cleaned up. ++ */ ++static int vc_sm_cma_release(struct inode *inode, struct file *file) ++{ ++ struct vc_sm_privdata_t *file_data = ++ (struct vc_sm_privdata_t *)file->private_data; ++ int ret = 0; ++ ++ /* Make sure the device was started properly. */ ++ if (!sm_state || !file_data) { ++ pr_err("[%s]: invalid device\n", __func__); ++ ret = -EPERM; ++ goto out; ++ } ++ ++ pr_debug("[%s]: using private data %p\n", __func__, file_data); ++ ++ /* Terminate the private data. */ ++ kfree(file_data); ++ ++out: ++ return ret; ++} ++ ++/* ++ * Allocate a shared memory handle and block. ++ * Allocation is from CMA, and then imported into the VPU mappings. ++ */ ++int vc_sm_cma_ioctl_alloc(struct vc_sm_privdata_t *private, ++ struct vc_sm_cma_ioctl_alloc *ioparam) ++{ ++ DEFINE_DMA_BUF_EXPORT_INFO(exp_info); ++ struct vc_sm_buffer *buffer = NULL; ++ struct vc_sm_import import = { 0 }; ++ struct vc_sm_import_result result = { 0 }; ++ struct dma_buf *dmabuf = NULL; ++ int aligned_size; ++ int ret = 0; ++ int status; ++ int fd = -1; ++ ++ aligned_size = PAGE_ALIGN(ioparam->size); ++ ++ if (!aligned_size) ++ return -EINVAL; ++ ++ /* Allocate local buffer to track this allocation. */ ++ buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); ++ if (!buffer) { ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, ++ aligned_size)) { ++ pr_err("[%s]: cma alloc of %d bytes failed\n", ++ __func__, aligned_size); ++ kfree(buffer); ++ return -ENOMEM; ++ } ++ buffer->sg_table = buffer->alloc.sg_table; ++ ++ if (dma_map_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, ++ buffer->sg_table->nents, DMA_BIDIRECTIONAL) <= 0) { ++ pr_err("[%s]: dma_map_sg failed\n", __func__); ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ import.type = VC_SM_ALLOC_NON_CACHED; ++ import.allocator = current->tgid; ++ ++ if (*ioparam->name) ++ memcpy(import.name, ioparam->name, sizeof(import.name) - 1); ++ else ++ memcpy(import.name, VC_SM_RESOURCE_NAME_DEFAULT, ++ sizeof(VC_SM_RESOURCE_NAME_DEFAULT)); ++ ++ mutex_init(&buffer->lock); ++ INIT_LIST_HEAD(&buffer->attachments); ++ memcpy(buffer->name, import.name, ++ min(sizeof(buffer->name), sizeof(import.name) - 1)); ++ ++ exp_info.ops = &dma_buf_ops; ++ exp_info.size = aligned_size; ++ exp_info.flags = O_RDWR; ++ exp_info.priv = buffer; ++ ++ dmabuf = dma_buf_export(&exp_info); ++ if (IS_ERR(dmabuf)) { ++ ret = PTR_ERR(dmabuf); ++ goto error; ++ } ++ buffer->dma_buf = dmabuf; ++ ++ import.addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); ++ import.size = aligned_size; ++ import.kernel_id = (uint32_t)buffer; ++ ++ /* Wrap it into a videocore buffer. */ ++ status = vc_sm_cma_vchi_import(sm_state->sm_handle, &import, &result, ++ &sm_state->int_trans_id); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting import memory action restart (trans_id: %u)\n", ++ __func__, sm_state->int_trans_id); ++ ret = -ERESTARTSYS; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_IMPORT; ++ goto error; ++ } else if (status || !result.res_handle) { ++ pr_err("[%s]: failed to import memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, sm_state->int_trans_id); ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ /* Keep track of the buffer we created. */ ++ buffer->private = private; ++ buffer->vc_handle = result.res_handle; ++ buffer->size = import.size; ++ buffer->dma_addr = import.addr; ++ buffer->vpu_state = VPU_MAPPED; ++ //buffer->res_cached = ioparam->cached; ++ ++ fd = dma_buf_fd(dmabuf, O_CLOEXEC); ++ if (fd < 0) ++ goto error; ++ ++ vc_sm_add_resource(private, buffer); ++ ++ pr_debug("[%s]: Added resource as fd %d, buffer %p, private %p, dma_addr %pad\n", ++ __func__, fd, buffer, private, &buffer->dma_addr); ++ ++ /* We're done */ ++ ioparam->handle = fd; ++ ioparam->vc_handle = buffer->vc_handle; ++ ioparam->dma_addr = buffer->dma_addr; ++ return 0; ++ ++error: ++ if (buffer) { ++ pr_err("[%s]: something failed - cleanup. ret %d\n", __func__, ++ ret); ++ ++ dma_buf_put(dmabuf); ++ } ++ return ret; ++} ++ ++static long vc_sm_cma_ioctl(struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ int ret = 0; ++ unsigned int cmdnr = _IOC_NR(cmd); ++ struct vc_sm_privdata_t *file_data = ++ (struct vc_sm_privdata_t *)file->private_data; ++ ++ /* Validate we can work with this device. */ ++ if (!sm_state || !file_data) { ++ pr_err("[%s]: invalid device\n", __func__); ++ return -EPERM; ++ } ++ ++ pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, ++ current->tgid, file_data->pid); ++ ++ /* Action is a re-post of a previously interrupted action? */ ++ if (file_data->restart_sys == -EINTR) { ++ struct vc_sm_action_clean_t action_clean; ++ ++ pr_debug("[%s]: clean up of action %u (trans_id: %u) following EINTR\n", ++ __func__, file_data->int_action, ++ file_data->int_trans_id); ++ ++ action_clean.res_action = file_data->int_action; ++ action_clean.action_trans_id = file_data->int_trans_id; ++ ++ file_data->restart_sys = 0; ++ } ++ ++ /* Now process the command. */ ++ switch (cmdnr) { ++ /* New memory allocation. ++ */ ++ case VC_SM_CMA_CMD_ALLOC: ++ { ++ struct vc_sm_cma_ioctl_alloc ioparam; ++ ++ /* Get the parameter data. */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ break; ++ } ++ ++ ret = vc_sm_cma_ioctl_alloc(file_data, &ioparam); ++ if (!ret && ++ (copy_to_user((void *)arg, &ioparam, ++ sizeof(ioparam)) != 0)) { ++ /* FIXME: Release allocation */ ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ break; ++ } ++ ++ case VC_SM_CMA_CMD_IMPORT_DMABUF: ++ { ++ struct vc_sm_cma_ioctl_import_dmabuf ioparam; ++ struct dma_buf *new_dmabuf; ++ ++ /* Get the parameter data. */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ break; ++ } ++ ++ ret = vc_sm_cma_import_dmabuf_internal(file_data, ++ NULL, ++ ioparam.dmabuf_fd, ++ &new_dmabuf); ++ ++ if (!ret) { ++ struct vc_sm_buffer *buf = new_dmabuf->priv; ++ ++ ioparam.size = buf->size; ++ ioparam.handle = dma_buf_fd(new_dmabuf, ++ O_CLOEXEC); ++ ioparam.vc_handle = buf->vc_handle; ++ ioparam.dma_addr = buf->dma_addr; ++ ++ if (ioparam.handle < 0 || ++ (copy_to_user((void *)arg, &ioparam, ++ sizeof(ioparam)) != 0)) { ++ dma_buf_put(new_dmabuf); ++ /* FIXME: Release allocation */ ++ ret = -EFAULT; ++ } ++ } ++ break; ++ } ++ ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ return ret; ++} ++ ++/* Device operations that we managed in this driver. */ ++static const struct file_operations vc_sm_ops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = vc_sm_cma_ioctl, ++ .open = vc_sm_cma_open, ++ .release = vc_sm_cma_release, ++}; ++ ++/* Driver load/unload functions */ + /* Videocore connected. */ + static void vc_sm_connected_init(void) + { +@@ -1075,12 +1384,11 @@ static void vc_sm_connected_init(void) + + pr_info("[%s]: start\n", __func__); + +- if (vc_sm_cma_add_heaps(&sm_state->cma_heap) || +- !sm_state->cma_heap) { +- pr_err("[%s]: failed to initialise CMA heaps\n", ++ vc_sm_cma_add_heaps(&sm_state->cma_heap); ++ if (!sm_state->cma_heap) { ++ pr_err("[%s]: failed to initialise CMA heap\n", + __func__); +- ret = -EIO; +- goto err_free_mem; ++ return; + } + + /* +@@ -1092,8 +1400,7 @@ static void vc_sm_connected_init(void) + pr_err("[%s]: failed to initialise VCHI instance (ret=%d)\n", + __func__, ret); + +- ret = -EIO; +- goto err_failed; ++ return; + } + + ret = vchi_connect(NULL, 0, vchi_instance); +@@ -1101,8 +1408,7 @@ static void vc_sm_connected_init(void) + pr_err("[%s]: failed to connect VCHI instance (ret=%d)\n", + __func__, ret); + +- ret = -EIO; +- goto err_failed; ++ return; + } + + /* Initialize an instance of the shared memory service. */ +@@ -1112,8 +1418,7 @@ static void vc_sm_connected_init(void) + pr_err("[%s]: failed to initialize shared memory service\n", + __func__); + +- ret = -EPERM; +- goto err_failed; ++ return; + } + + /* Create a debug fs directory entry (root). */ +@@ -1127,11 +1432,22 @@ static void vc_sm_connected_init(void) + + INIT_LIST_HEAD(&sm_state->buffer_list); + ++ /* Create a shared memory device. */ ++ sm_state->misc_dev.minor = MISC_DYNAMIC_MINOR; ++ sm_state->misc_dev.name = DEVICE_NAME; ++ sm_state->misc_dev.fops = &vc_sm_ops; ++ sm_state->misc_dev.parent = NULL; ++ ret = misc_register(&sm_state->misc_dev); ++ if (ret) { ++ pr_err("vcsm-cma: failed to register misc device.\n"); ++ goto err_remove_debugfs; ++ } ++ + sm_state->data_knl = vc_sm_cma_create_priv_data(0); + if (!sm_state->data_knl) { + pr_err("[%s]: failed to create kernel private data tracker\n", + __func__); +- goto err_remove_shared_memory; ++ goto err_remove_misc_dev; + } + + version.version = 2; +@@ -1148,11 +1464,13 @@ static void vc_sm_connected_init(void) + pr_info("[%s]: installed successfully\n", __func__); + return; + +-err_remove_shared_memory: ++err_remove_misc_dev: ++ misc_deregister(&sm_state->misc_dev); ++err_remove_debugfs: + debugfs_remove_recursive(sm_state->dir_root); + vc_sm_cma_vchi_stop(&sm_state->sm_handle); +-err_failed: +- pr_info("[%s]: failed, ret %d\n", __func__, ret); ++ ++ return; + } + + /* Driver loading. */ +@@ -1184,6 +1502,8 @@ static int bcm2835_vc_sm_cma_remove(stru + { + pr_debug("[%s]: start\n", __func__); + if (sm_inited) { ++ misc_deregister(&sm_state->misc_dev); ++ + /* Remove all proc entries. */ + debugfs_remove_recursive(sm_state->dir_root); + +@@ -1202,6 +1522,7 @@ static int bcm2835_vc_sm_cma_remove(stru + return 0; + } + ++/* Kernel API calls */ + /* Get an internal resource handle mapped from the external one. */ + int vc_sm_cma_int_handle(void *handle) + { +@@ -1252,7 +1573,7 @@ int vc_sm_cma_import_dmabuf(struct dma_b + } + + ret = vc_sm_cma_import_dmabuf_internal(sm_state->data_knl, src_dmabuf, +- &new_dma_buf); ++ -1, &new_dma_buf); + + if (!ret) { + pr_debug("%s: imported to ptr %p\n", __func__, new_dma_buf); +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c +@@ -92,8 +92,7 @@ int __vc_sm_cma_add_heaps(struct cma *cm + return 0; + } + +-int vc_sm_cma_add_heaps(struct cma **cma_heap) ++void vc_sm_cma_add_heaps(struct cma **cma_heap) + { + cma_for_each_area(__vc_sm_cma_add_heaps, cma_heap); +- return 0; + } +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h +@@ -34,6 +34,6 @@ int vc_sm_cma_buffer_allocate(struct cma + unsigned long len); + void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer); + +-int vc_sm_cma_add_heaps(struct cma **cma_heap); ++void vc_sm_cma_add_heaps(struct cma **cma_heap); + + #endif +--- /dev/null ++++ b/include/linux/broadcom/vc_sm_cma_ioctl.h +@@ -0,0 +1,87 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++/* ++ * Copyright 2019 Raspberry Pi (Trading) Ltd. All rights reserved. ++ * ++ * Based on vmcs_sm_ioctl.h Copyright Broadcom Corporation. ++ */ ++ ++#ifndef __VC_SM_CMA_IOCTL_H ++#define __VC_SM_CMA_IOCTL_H ++ ++/* ---- Include Files ---------------------------------------------------- */ ++ ++#if defined(__KERNEL__) ++#include /* Needed for standard types */ ++#else ++#include ++#endif ++ ++#include ++ ++/* ---- Constants and Types ---------------------------------------------- */ ++ ++#define VC_SM_CMA_RESOURCE_NAME 32 ++#define VC_SM_CMA_RESOURCE_NAME_DEFAULT "sm-host-resource" ++ ++/* Type define used to create unique IOCTL number */ ++#define VC_SM_CMA_MAGIC_TYPE 'J' ++ ++/* IOCTL commands on /dev/vc-sm-cma */ ++enum vc_sm_cma_cmd_e { ++ VC_SM_CMA_CMD_ALLOC = 0x5A, /* Start at 0x5A arbitrarily */ ++ ++ VC_SM_CMA_CMD_IMPORT_DMABUF, ++ ++ VC_SM_CMA_CMD_LAST /* Do not delete */ ++}; ++ ++/* Cache type supported, conveniently matches the user space definition in ++ * user-vcsm.h. ++ */ ++enum vc_sm_cma_cache_e { ++ VC_SM_CMA_CACHE_NONE, ++ VC_SM_CMA_CACHE_HOST, ++ VC_SM_CMA_CACHE_VC, ++ VC_SM_CMA_CACHE_BOTH, ++}; ++ ++/* IOCTL Data structures */ ++struct vc_sm_cma_ioctl_alloc { ++ /* user -> kernel */ ++ __u32 size; ++ __u32 num; ++ __u32 cached; /* enum vc_sm_cma_cache_e */ ++ __u32 pad; ++ __u8 name[VC_SM_CMA_RESOURCE_NAME]; ++ ++ /* kernel -> user */ ++ __s32 handle; ++ __u32 vc_handle; ++ __u64 dma_addr; ++}; ++ ++struct vc_sm_cma_ioctl_import_dmabuf { ++ /* user -> kernel */ ++ __s32 dmabuf_fd; ++ __u32 cached; /* enum vc_sm_cma_cache_e */ ++ __u8 name[VC_SM_CMA_RESOURCE_NAME]; ++ ++ /* kernel -> user */ ++ __s32 handle; ++ __u32 vc_handle; ++ __u32 size; ++ __u32 pad; ++ __u64 dma_addr; ++}; ++ ++/* IOCTL numbers */ ++#define VC_SM_CMA_IOCTL_MEM_ALLOC\ ++ _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_ALLOC,\ ++ struct vc_sm_cma_ioctl_alloc) ++ ++#define VC_SM_CMA_IOCTL_MEM_IMPORT_DMABUF\ ++ _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_IMPORT_DMABUF,\ ++ struct vc_sm_cma_ioctl_import_dmabuf) ++ ++#endif /* __VC_SM_CMA_IOCTL_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0579-drm-v3d-Add-support-for-2711.patch b/target/linux/brcm2708/patches-4.19/950-0579-drm-v3d-Add-support-for-2711.patch deleted file mode 100644 index d6fa8cb1a0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0579-drm-v3d-Add-support-for-2711.patch +++ /dev/null @@ -1,20 +0,0 @@ -From ffd9543f2d74e9215996ce6500fc34dcf7976462 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 4 Oct 2018 17:22:43 -0700 -Subject: [PATCH 579/806] drm/v3d: Add support for 2711. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/v3d/v3d_drv.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/gpu/drm/v3d/v3d_drv.c -+++ b/drivers/gpu/drm/v3d/v3d_drv.c -@@ -235,6 +235,7 @@ static struct drm_driver v3d_drm_driver - static const struct of_device_id v3d_of_match[] = { - { .compatible = "brcm,7268-v3d" }, - { .compatible = "brcm,7278-v3d" }, -+ { .compatible = "brcm,2711-v3d" }, - {}, - }; - MODULE_DEVICE_TABLE(of, v3d_of_match); diff --git a/target/linux/brcm2708/patches-4.19/950-0579-staging-vcsm-cma-Add-cache-control-ioctls.patch b/target/linux/brcm2708/patches-4.19/950-0579-staging-vcsm-cma-Add-cache-control-ioctls.patch new file mode 100644 index 0000000000..500ec5f0bc --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0579-staging-vcsm-cma-Add-cache-control-ioctls.patch @@ -0,0 +1,245 @@ +From b17f6dc1d79ae057294ac2d8d824aa2258ab09a8 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 20 Mar 2019 10:40:00 +0000 +Subject: [PATCH] staging: vcsm-cma: Add cache control ioctls + +The old driver allowed for direct cache manipulation and that +was used by various clients. Replicate here. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/vc-sm-cma/vc_sm.c | 141 +++++++++++++++++- + include/linux/broadcom/vc_sm_cma_ioctl.h | 27 ++++ + 2 files changed, 165 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -46,6 +46,7 @@ + #include + #include + #include ++#include + + #include "vchiq_connected.h" + #include "vc_sm_cma_vchi.h" +@@ -1258,6 +1259,99 @@ error: + return ret; + } + ++/* Converts VCSM_CACHE_OP_* to an operating function. */ ++static void (*cache_op_to_func(const unsigned int cache_op)) ++ (const void*, const void*) ++{ ++ switch (cache_op) { ++ case VC_SM_CACHE_OP_NOP: ++ return NULL; ++ ++ case VC_SM_CACHE_OP_INV: ++ return dmac_inv_range; ++ ++ case VC_SM_CACHE_OP_CLEAN: ++ return dmac_clean_range; ++ ++ case VC_SM_CACHE_OP_FLUSH: ++ return dmac_flush_range; ++ ++ default: ++ pr_err("[%s]: Invalid cache_op: 0x%08x\n", __func__, cache_op); ++ return NULL; ++ } ++} ++ ++/* ++ * Clean/invalid/flush cache of which buffer is already pinned (i.e. accessed). ++ */ ++static int clean_invalid_contig_2d(const void __user *addr, ++ const size_t block_count, ++ const size_t block_size, ++ const size_t stride, ++ const unsigned int cache_op) ++{ ++ size_t i; ++ void (*op_fn)(const void *start, const void *end); ++ ++ if (!block_size) { ++ pr_err("[%s]: size cannot be 0\n", __func__); ++ return -EINVAL; ++ } ++ ++ op_fn = cache_op_to_func(cache_op); ++ if (!op_fn) ++ return -EINVAL; ++ ++ for (i = 0; i < block_count; i ++, addr += stride) ++ op_fn(addr, addr + block_size); ++ ++ return 0; ++} ++ ++static int vc_sm_cma_clean_invalid2(unsigned int cmdnr, unsigned long arg) ++{ ++ struct vc_sm_cma_ioctl_clean_invalid2 ioparam; ++ struct vc_sm_cma_ioctl_clean_invalid_block *block = NULL; ++ int i, ret = 0; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, (void *)arg, sizeof(ioparam))) { ++ pr_err("[%s]: failed to copy-from-user header for cmd %x\n", ++ __func__, cmdnr); ++ return -EFAULT; ++ } ++ block = kmalloc(ioparam.op_count * sizeof(*block), GFP_KERNEL); ++ if (!block) ++ return -EFAULT; ++ ++ if (copy_from_user(block, (void *)(arg + sizeof(ioparam)), ++ ioparam.op_count * sizeof(*block)) != 0) { ++ pr_err("[%s]: failed to copy-from-user payload for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ for (i = 0; i < ioparam.op_count; i++) { ++ const struct vc_sm_cma_ioctl_clean_invalid_block * const op = block + i; ++ ++ if (op->invalidate_mode == VC_SM_CACHE_OP_NOP) ++ continue; ++ ++ ret = clean_invalid_contig_2d((void __user *)op->start_address, ++ op->block_count, op->block_size, ++ op->inter_block_stride, ++ op->invalidate_mode); ++ if (ret) ++ break; ++ } ++out: ++ kfree(block); ++ ++ return ret; ++} ++ + static long vc_sm_cma_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) + { +@@ -1272,9 +1366,6 @@ static long vc_sm_cma_ioctl(struct file + return -EPERM; + } + +- pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, +- current->tgid, file_data->pid); +- + /* Action is a re-post of a previously interrupted action? */ + if (file_data->restart_sys == -EINTR) { + struct vc_sm_action_clean_t action_clean; +@@ -1357,7 +1448,18 @@ static long vc_sm_cma_ioctl(struct file + break; + } + ++ /* ++ * Flush/Invalidate the cache for a given mapping. ++ * Blocks must be pinned (i.e. accessed) before this call. ++ */ ++ case VC_SM_CMA_CMD_CLEAN_INVALID2: ++ ret = vc_sm_cma_clean_invalid2(cmdnr, arg); ++ break; ++ + default: ++ pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, ++ current->tgid, file_data->pid); ++ + ret = -EINVAL; + break; + } +@@ -1365,10 +1467,43 @@ static long vc_sm_cma_ioctl(struct file + return ret; + } + ++#ifdef CONFIG_COMPAT ++struct vc_sm_cma_ioctl_clean_invalid2_32 { ++ u32 op_count; ++ struct vc_sm_cma_ioctl_clean_invalid_block { ++ u16 invalidate_mode; ++ u16 block_count; ++ compat_uptr_t start_address; ++ u32 block_size; ++ u32 inter_block_stride; ++ } s[0]; ++}; ++ ++#define VC_SM_CMA_CMD_CLEAN_INVALID2_32\ ++ _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_CLEAN_INVALID2,\ ++ struct vc_sm_cma_ioctl_clean_invalid2) ++ ++static long vc_sm_cma_compat_ioctl(struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ switch (cmd) { ++ case VC_SM_CMA_CMD_CLEAN_INVALID2_32: ++ /* FIXME */ ++ break; ++ ++ default: ++ return vc_sm_cma_compat_ioctl(file, cmd, arg); ++ } ++} ++#endif ++ + /* Device operations that we managed in this driver. */ + static const struct file_operations vc_sm_ops = { + .owner = THIS_MODULE, + .unlocked_ioctl = vc_sm_cma_ioctl, ++#ifdef CONFIG_COMPAT ++ .compat_ioctl = vc_sm_cma_compat_ioctl, ++#endif + .open = vc_sm_cma_open, + .release = vc_sm_cma_release, + }; +--- a/include/linux/broadcom/vc_sm_cma_ioctl.h ++++ b/include/linux/broadcom/vc_sm_cma_ioctl.h +@@ -33,6 +33,8 @@ enum vc_sm_cma_cmd_e { + + VC_SM_CMA_CMD_IMPORT_DMABUF, + ++ VC_SM_CMA_CMD_CLEAN_INVALID2, ++ + VC_SM_CMA_CMD_LAST /* Do not delete */ + }; + +@@ -75,6 +77,27 @@ struct vc_sm_cma_ioctl_import_dmabuf { + __u64 dma_addr; + }; + ++/* ++ * Cache functions to be set to struct vc_sm_cma_ioctl_clean_invalid2 ++ * invalidate_mode. ++ */ ++#define VC_SM_CACHE_OP_NOP 0x00 ++#define VC_SM_CACHE_OP_INV 0x01 ++#define VC_SM_CACHE_OP_CLEAN 0x02 ++#define VC_SM_CACHE_OP_FLUSH 0x03 ++ ++struct vc_sm_cma_ioctl_clean_invalid2 { ++ __u32 op_count; ++ __u32 pad; ++ struct vc_sm_cma_ioctl_clean_invalid_block { ++ __u32 invalidate_mode; ++ __u32 block_count; ++ void * __user start_address; ++ __u32 block_size; ++ __u32 inter_block_stride; ++ } s[0]; ++}; ++ + /* IOCTL numbers */ + #define VC_SM_CMA_IOCTL_MEM_ALLOC\ + _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_ALLOC,\ +@@ -84,4 +107,8 @@ struct vc_sm_cma_ioctl_import_dmabuf { + _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_IMPORT_DMABUF,\ + struct vc_sm_cma_ioctl_import_dmabuf) + ++#define VC_SM_CMA_IOCTL_MEM_CLEAN_INVALID2\ ++ _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_CLEAN_INVALID2,\ ++ struct vc_sm_cma_ioctl_clean_invalid2) ++ + #endif /* __VC_SM_CMA_IOCTL_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0580-drm-v3d-Skip-MMU-flush-if-the-device-is-currently-of.patch b/target/linux/brcm2708/patches-4.19/950-0580-drm-v3d-Skip-MMU-flush-if-the-device-is-currently-of.patch deleted file mode 100644 index ea5044c1f7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0580-drm-v3d-Skip-MMU-flush-if-the-device-is-currently-of.patch +++ /dev/null @@ -1,52 +0,0 @@ -From f389abea861f9bd3165f98a8d3a1f3407e9fc01a Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 14 Jan 2019 12:35:43 -0800 -Subject: [PATCH 580/806] drm/v3d: Skip MMU flush if the device is currently - off. - -If it's off, we know it will be reset on poweron, so the MMU won't -have any TLB cached from before this point. Avoids failed waits for -MMU flush to reply. - -Signed-off-by: Eric Anholt -(cherry picked from commit 3ee4e2e0a9e9587eacbb69b067bbc72ab2cdc47b) ---- - drivers/gpu/drm/v3d/v3d_mmu.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/drivers/gpu/drm/v3d/v3d_mmu.c -+++ b/drivers/gpu/drm/v3d/v3d_mmu.c -@@ -18,6 +18,8 @@ - * each client. This is not yet implemented. - */ - -+#include -+ - #include "v3d_drv.h" - #include "v3d_regs.h" - -@@ -34,6 +36,14 @@ static int v3d_mmu_flush_all(struct v3d_ - { - int ret; - -+ /* Keep power on the device on until we're done with this -+ * call, but skip the flush if the device is off and will be -+ * reset when powered back on. -+ */ -+ ret = pm_runtime_get_if_in_use(v3d->dev); -+ if (ret == 0) -+ return 0; -+ - /* Make sure that another flush isn't already running when we - * start this one. - */ -@@ -61,6 +71,9 @@ static int v3d_mmu_flush_all(struct v3d_ - if (ret) - dev_err(v3d->dev, "MMUC flush wait idle failed\n"); - -+ pm_runtime_mark_last_busy(v3d->dev); -+ pm_runtime_put_autosuspend(v3d->dev); -+ - return ret; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0580-staging-vcsm-cma-Alter-dev-node-permissions-to-0666.patch b/target/linux/brcm2708/patches-4.19/950-0580-staging-vcsm-cma-Alter-dev-node-permissions-to-0666.patch new file mode 100644 index 0000000000..ee3d1de7d2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0580-staging-vcsm-cma-Alter-dev-node-permissions-to-0666.patch @@ -0,0 +1,24 @@ +From 4b78daea312bd39e892eb94f8c7905e2d5b682b4 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 13 May 2019 16:47:54 +0100 +Subject: [PATCH] staging: vcsm-cma: Alter dev node permissions to 0666 + +Until the udev rules are updated, open up access to this node by +default. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -1572,6 +1572,8 @@ static void vc_sm_connected_init(void) + sm_state->misc_dev.name = DEVICE_NAME; + sm_state->misc_dev.fops = &vc_sm_ops; + sm_state->misc_dev.parent = NULL; ++ /* Temporarily set as 666 until udev rules have been sorted */ ++ sm_state->misc_dev.mode = 0666; + ret = misc_register(&sm_state->misc_dev); + if (ret) { + pr_err("vcsm-cma: failed to register misc device.\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0581-drm-v3d-Hook-up-the-runtime-PM-ops.patch b/target/linux/brcm2708/patches-4.19/950-0581-drm-v3d-Hook-up-the-runtime-PM-ops.patch deleted file mode 100644 index 55ad2b5f3b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0581-drm-v3d-Hook-up-the-runtime-PM-ops.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 30dd82d785715b2ed52a5079595ffcd2ec1f728d Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 14 Jan 2019 14:47:57 -0800 -Subject: [PATCH 581/806] drm/v3d: Hook up the runtime PM ops. - -In translating the runtime PM code from vc4, I missed the ".pm" -assignment to actually connect them up. Fixes missing MMU setup if -runtime PM resets V3D. - -Signed-off-by: Eric Anholt -(cherry picked from commit ca197699af29baa8236c74c53d4904ca8957ee06) ---- - drivers/gpu/drm/v3d/v3d_drv.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/v3d/v3d_drv.c -+++ b/drivers/gpu/drm/v3d/v3d_drv.c -@@ -66,7 +66,7 @@ static int v3d_runtime_resume(struct dev - } - #endif - --static const struct dev_pm_ops v3d_v3d_pm_ops = { -+static const struct dev_pm_ops v3d_pm_ops = { - SET_RUNTIME_PM_OPS(v3d_runtime_suspend, v3d_runtime_resume, NULL) - }; - -@@ -371,6 +371,7 @@ static struct platform_driver v3d_platfo - .driver = { - .name = "v3d", - .of_match_table = v3d_of_match, -+ .pm = &v3d_pm_ops, - }, - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0581-staging-vcsm-cma-Drop-logging-level-on-messages-in-v.patch b/target/linux/brcm2708/patches-4.19/950-0581-staging-vcsm-cma-Drop-logging-level-on-messages-in-v.patch new file mode 100644 index 0000000000..320552e6c8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0581-staging-vcsm-cma-Drop-logging-level-on-messages-in-v.patch @@ -0,0 +1,33 @@ +From c38256621d4dffbbc0c19737d724724f04b0df9a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 16 May 2019 15:17:19 +0100 +Subject: [PATCH] staging: vcsm-cma: Drop logging level on messages in + vc_sm_release_resource + +They weren't errors but were logged as such. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -301,14 +301,13 @@ static void vc_sm_release_resource(struc + + if (buffer->vc_handle) { + /* We've sent the unmap request but not had the response. */ +- pr_err("[%s]: Waiting for VPU unmap response on %p\n", +- __func__, buffer); ++ pr_debug("[%s]: Waiting for VPU unmap response on %p\n", ++ __func__, buffer); + goto defer; + } + if (buffer->in_use) { + /* dmabuf still in use - we await the release */ +- pr_err("[%s]: buffer %p is still in use\n", +- __func__, buffer); ++ pr_debug("[%s]: buffer %p is still in use\n", __func__, buffer); + goto defer; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0582-drm-v3d-HACK-gut-runtime-pm-for-now.patch b/target/linux/brcm2708/patches-4.19/950-0582-drm-v3d-HACK-gut-runtime-pm-for-now.patch deleted file mode 100644 index 6b2db7306e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0582-drm-v3d-HACK-gut-runtime-pm-for-now.patch +++ /dev/null @@ -1,172 +0,0 @@ -From 2d4f38abdc2a919d8002fbec7bc0be7c1312786a Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 14 Jan 2019 15:13:17 -0800 -Subject: [PATCH 582/806] drm/v3d: HACK: gut runtime pm for now. - -Something is still unstable -- on starting a new glxgears from an idle -X11, I get an MMU violation in high addresses. The CTS also failed -quite quickly. With this, CTS progresses for an hour before OOMing -(allocating some big buffers when my board only has 600MB available to -Linux) - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/v3d/v3d_debugfs.c | 16 +--------------- - drivers/gpu/drm/v3d/v3d_drv.c | 7 ------- - drivers/gpu/drm/v3d/v3d_gem.c | 20 -------------------- - 3 files changed, 1 insertion(+), 42 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_debugfs.c -+++ b/drivers/gpu/drm/v3d/v3d_debugfs.c -@@ -4,7 +4,6 @@ - #include - #include - #include --#include - #include - #include - -@@ -100,11 +99,8 @@ static int v3d_v3d_debugfs_ident(struct - struct drm_device *dev = node->minor->dev; - struct v3d_dev *v3d = to_v3d_dev(dev); - u32 ident0, ident1, ident2, ident3, cores; -- int ret, core; -+ int core; - -- ret = pm_runtime_get_sync(v3d->dev); -- if (ret < 0) -- return ret; - - ident0 = V3D_READ(V3D_HUB_IDENT0); - ident1 = V3D_READ(V3D_HUB_IDENT1); -@@ -157,9 +153,6 @@ static int v3d_v3d_debugfs_ident(struct - (misccfg & V3D_MISCCFG_OVRTMUOUT) != 0); - } - -- pm_runtime_mark_last_busy(v3d->dev); -- pm_runtime_put_autosuspend(v3d->dev); -- - return 0; - } - -@@ -187,11 +180,6 @@ static int v3d_measure_clock(struct seq_ - uint32_t cycles; - int core = 0; - int measure_ms = 1000; -- int ret; -- -- ret = pm_runtime_get_sync(v3d->dev); -- if (ret < 0) -- return ret; - - if (v3d->ver >= 40) { - V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3, -@@ -215,8 +203,6 @@ static int v3d_measure_clock(struct seq_ - cycles / (measure_ms * 1000), - (cycles / (measure_ms * 100)) % 10); - -- pm_runtime_mark_last_busy(v3d->dev); -- pm_runtime_put_autosuspend(v3d->dev); - - return 0; - } ---- a/drivers/gpu/drm/v3d/v3d_drv.c -+++ b/drivers/gpu/drm/v3d/v3d_drv.c -@@ -75,7 +75,6 @@ static int v3d_get_param_ioctl(struct dr - { - struct v3d_dev *v3d = to_v3d_dev(dev); - struct drm_v3d_get_param *args = data; -- int ret; - static const u32 reg_map[] = { - [DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG, - [DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1, -@@ -101,15 +100,12 @@ static int v3d_get_param_ioctl(struct dr - if (args->value != 0) - return -EINVAL; - -- ret = pm_runtime_get_sync(v3d->dev); - if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 && - args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) { - args->value = V3D_CORE_READ(0, offset); - } else { - args->value = V3D_READ(offset); - } -- pm_runtime_mark_last_busy(v3d->dev); -- pm_runtime_put_autosuspend(v3d->dev); - return 0; - } - -@@ -311,9 +307,6 @@ static int v3d_platform_drm_probe(struct - goto dev_free; - } - -- pm_runtime_use_autosuspend(dev); -- pm_runtime_set_autosuspend_delay(dev, 50); -- pm_runtime_enable(dev); - - ret = drm_dev_init(&v3d->drm, &v3d_drm_driver, dev); - if (ret) ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -375,7 +375,6 @@ v3d_exec_cleanup(struct kref *ref) - { - struct v3d_exec_info *exec = container_of(ref, struct v3d_exec_info, - refcount); -- struct v3d_dev *v3d = exec->v3d; - unsigned int i; - struct v3d_bo *bo, *save; - -@@ -396,9 +395,6 @@ v3d_exec_cleanup(struct kref *ref) - drm_gem_object_put_unlocked(&bo->base); - } - -- pm_runtime_mark_last_busy(v3d->dev); -- pm_runtime_put_autosuspend(v3d->dev); -- - kfree(exec); - } - -@@ -412,7 +408,6 @@ v3d_tfu_job_cleanup(struct kref *ref) - { - struct v3d_tfu_job *job = container_of(ref, struct v3d_tfu_job, - refcount); -- struct v3d_dev *v3d = job->v3d; - unsigned int i; - - dma_fence_put(job->in_fence); -@@ -423,9 +418,6 @@ v3d_tfu_job_cleanup(struct kref *ref) - drm_gem_object_put_unlocked(&job->bo[i]->base); - } - -- pm_runtime_mark_last_busy(v3d->dev); -- pm_runtime_put_autosuspend(v3d->dev); -- - kfree(job); - } - -@@ -519,12 +511,6 @@ v3d_submit_cl_ioctl(struct drm_device *d - if (!exec) - return -ENOMEM; - -- ret = pm_runtime_get_sync(v3d->dev); -- if (ret < 0) { -- kfree(exec); -- return ret; -- } -- - kref_init(&exec->refcount); - - ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl, -@@ -643,12 +629,6 @@ v3d_submit_tfu_ioctl(struct drm_device * - if (!job) - return -ENOMEM; - -- ret = pm_runtime_get_sync(v3d->dev); -- if (ret < 0) { -- kfree(job); -- return ret; -- } -- - kref_init(&job->refcount); - - ret = drm_syncobj_find_fence(file_priv, args->in_sync, diff --git a/target/linux/brcm2708/patches-4.19/950-0582-staging-vcsm-cma-Fixup-the-alloc-code-handling-of-ke.patch b/target/linux/brcm2708/patches-4.19/950-0582-staging-vcsm-cma-Fixup-the-alloc-code-handling-of-ke.patch new file mode 100644 index 0000000000..5e5c6bc2de --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0582-staging-vcsm-cma-Fixup-the-alloc-code-handling-of-ke.patch @@ -0,0 +1,35 @@ +From 52f881e3afa89bb1ca9e8b037f7600bcc97626e8 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 22 May 2019 15:40:37 +0100 +Subject: [PATCH] staging: vcsm-cma: Fixup the alloc code handling of + kernel_id + +The allocation code had been copied in from an old branch prior +to having added the IDR for 64bit support. It was therefore pushing +a pointer into the kernel_id field instead of an IDR handle, the +lookup therefore failed, and we never released the buffer. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -1206,7 +1206,7 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p + + import.addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); + import.size = aligned_size; +- import.kernel_id = (uint32_t)buffer; ++ import.kernel_id = get_kernel_id(buffer); + + /* Wrap it into a videocore buffer. */ + status = vc_sm_cma_vchi_import(sm_state->sm_handle, &import, &result, +@@ -1231,6 +1231,7 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p + buffer->size = import.size; + buffer->dma_addr = import.addr; + buffer->vpu_state = VPU_MAPPED; ++ buffer->kernel_id = import.kernel_id; + //buffer->res_cached = ioparam->cached; + + fd = dma_buf_fd(dmabuf, O_CLOEXEC); diff --git a/target/linux/brcm2708/patches-4.19/950-0583-Pulled-in-the-multi-frame-buffer-support-from-the-Pi.patch b/target/linux/brcm2708/patches-4.19/950-0583-Pulled-in-the-multi-frame-buffer-support-from-the-Pi.patch new file mode 100644 index 0000000000..883d947c22 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0583-Pulled-in-the-multi-frame-buffer-support-from-the-Pi.patch @@ -0,0 +1,925 @@ +From 3e33fb46eb8791ba39fe4781f278487bcc2c3356 Mon Sep 17 00:00:00 2001 +From: James Hughes +Date: Thu, 14 Mar 2019 13:27:54 +0000 +Subject: [PATCH] Pulled in the multi frame buffer support from the Pi3 + repo + +--- + drivers/video/fbdev/bcm2708_fb.c | 580 +++++++++++++++------ + include/soc/bcm2835/raspberrypi-firmware.h | 4 + + 2 files changed, 432 insertions(+), 152 deletions(-) + +--- a/drivers/video/fbdev/bcm2708_fb.c ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -2,6 +2,7 @@ + * linux/drivers/video/bcm2708_fb.c + * + * Copyright (C) 2010 Broadcom ++ * Copyright (C) 2018 Raspberry Pi (Trading) Ltd + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive +@@ -13,6 +14,7 @@ + * Copyright 1999-2001 Jeff Garzik + * + */ ++ + #include + #include + #include +@@ -36,6 +38,7 @@ + #include + #include + #include ++#include + + //#define BCM2708_FB_DEBUG + #define MODULE_NAME "bcm2708_fb" +@@ -82,62 +85,139 @@ struct bcm2708_fb_stats { + u32 dma_irqs; + }; + ++struct vc4_display_settings_t { ++ u32 display_num; ++ u32 width; ++ u32 height; ++ u32 pitch; ++ u32 depth; ++ u32 virtual_width; ++ u32 virtual_height; ++ u32 virtual_width_offset; ++ u32 virtual_height_offset; ++ unsigned long fb_bus_address; ++}; ++ ++struct bcm2708_fb_dev; ++ + struct bcm2708_fb { + struct fb_info fb; + struct platform_device *dev; +- struct rpi_firmware *fw; + u32 cmap[16]; + u32 gpu_cmap[256]; ++ struct dentry *debugfs_dir; ++ struct dentry *debugfs_subdir; ++ unsigned long fb_bus_address; ++ struct { u32 base, length; } gpu; ++ struct vc4_display_settings_t display_settings; ++ struct debugfs_regset32 screeninfo_regset; ++ struct bcm2708_fb_dev *fbdev; ++ unsigned int image_size; ++ dma_addr_t dma_addr; ++ void *cpuaddr; ++}; ++ ++#define MAX_FRAMEBUFFERS 3 ++ ++struct bcm2708_fb_dev { ++ int firmware_supports_multifb; ++ /* Protects the DMA system from multiple FB access */ ++ struct mutex dma_mutex; + int dma_chan; + int dma_irq; + void __iomem *dma_chan_base; +- void *cb_base; /* DMA control blocks */ +- dma_addr_t cb_handle; +- struct dentry *debugfs_dir; + wait_queue_head_t dma_waitq; +- struct bcm2708_fb_stats stats; +- unsigned long fb_bus_address; +- struct { u32 base, length; } gpu; ++ bool disable_arm_alloc; ++ struct bcm2708_fb_stats dma_stats; ++ void *cb_base; /* DMA control blocks */ ++ dma_addr_t cb_handle; ++ int instance_count; ++ int num_displays; ++ struct rpi_firmware *fw; ++ struct bcm2708_fb displays[MAX_FRAMEBUFFERS]; + }; + + #define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) + + static void bcm2708_fb_debugfs_deinit(struct bcm2708_fb *fb) + { +- debugfs_remove_recursive(fb->debugfs_dir); +- fb->debugfs_dir = NULL; ++ debugfs_remove_recursive(fb->debugfs_subdir); ++ fb->debugfs_subdir = NULL; ++ ++ fb->fbdev->instance_count--; ++ ++ if (!fb->fbdev->instance_count) { ++ debugfs_remove_recursive(fb->debugfs_dir); ++ fb->debugfs_dir = NULL; ++ } + } + + static int bcm2708_fb_debugfs_init(struct bcm2708_fb *fb) + { ++ char buf[3]; ++ struct bcm2708_fb_dev *fbdev = fb->fbdev; ++ + static struct debugfs_reg32 stats_registers[] = { +- { +- "dma_copies", +- offsetof(struct bcm2708_fb_stats, dma_copies) +- }, +- { +- "dma_irqs", +- offsetof(struct bcm2708_fb_stats, dma_irqs) +- }, ++ {"dma_copies", offsetof(struct bcm2708_fb_stats, dma_copies)}, ++ {"dma_irqs", offsetof(struct bcm2708_fb_stats, dma_irqs)}, + }; + +- fb->debugfs_dir = debugfs_create_dir(DRIVER_NAME, NULL); ++ static struct debugfs_reg32 screeninfo[] = { ++ {"width", offsetof(struct fb_var_screeninfo, xres)}, ++ {"height", offsetof(struct fb_var_screeninfo, yres)}, ++ {"bpp", offsetof(struct fb_var_screeninfo, bits_per_pixel)}, ++ {"xres_virtual", offsetof(struct fb_var_screeninfo, xres_virtual)}, ++ {"yres_virtual", offsetof(struct fb_var_screeninfo, yres_virtual)}, ++ {"xoffset", offsetof(struct fb_var_screeninfo, xoffset)}, ++ {"yoffset", offsetof(struct fb_var_screeninfo, yoffset)}, ++ }; ++ ++ fb->debugfs_dir = debugfs_lookup(DRIVER_NAME, NULL); ++ ++ if (!fb->debugfs_dir) ++ fb->debugfs_dir = debugfs_create_dir(DRIVER_NAME, NULL); ++ + if (!fb->debugfs_dir) { +- pr_warn("%s: could not create debugfs entry\n", +- __func__); ++ dev_warn(fb->fb.dev, "%s: could not create debugfs folder\n", ++ __func__); ++ return -EFAULT; ++ } ++ ++ snprintf(buf, sizeof(buf), "%u", fb->display_settings.display_num); ++ ++ fb->debugfs_subdir = debugfs_create_dir(buf, fb->debugfs_dir); ++ ++ if (!fb->debugfs_subdir) { ++ dev_warn(fb->fb.dev, "%s: could not create debugfs entry %u\n", ++ __func__, fb->display_settings.display_num); + return -EFAULT; + } + +- fb->stats.regset.regs = stats_registers; +- fb->stats.regset.nregs = ARRAY_SIZE(stats_registers); +- fb->stats.regset.base = &fb->stats; +- +- if (!debugfs_create_regset32("stats", 0444, fb->debugfs_dir, +- &fb->stats.regset)) { +- pr_warn("%s: could not create statistics registers\n", +- __func__); ++ fbdev->dma_stats.regset.regs = stats_registers; ++ fbdev->dma_stats.regset.nregs = ARRAY_SIZE(stats_registers); ++ fbdev->dma_stats.regset.base = &fbdev->dma_stats; ++ ++ if (!debugfs_create_regset32("dma_stats", 0444, fb->debugfs_subdir, ++ &fbdev->dma_stats.regset)) { ++ dev_warn(fb->fb.dev, "%s: could not create statistics registers\n", ++ __func__); ++ goto fail; ++ } ++ ++ fb->screeninfo_regset.regs = screeninfo; ++ fb->screeninfo_regset.nregs = ARRAY_SIZE(screeninfo); ++ fb->screeninfo_regset.base = &fb->fb.var; ++ ++ if (!debugfs_create_regset32("screeninfo", 0444, fb->debugfs_subdir, ++ &fb->screeninfo_regset)) { ++ dev_warn(fb->fb.dev, ++ "%s: could not create dimensions registers\n", ++ __func__); + goto fail; + } ++ ++ fbdev->instance_count++; ++ + return 0; + + fail: +@@ -145,6 +225,20 @@ fail: + return -EFAULT; + } + ++static void set_display_num(struct bcm2708_fb *fb) ++{ ++ if (fb && fb->fbdev && fb->fbdev->firmware_supports_multifb) { ++ u32 tmp = fb->display_settings.display_num; ++ ++ if (rpi_firmware_property(fb->fbdev->fw, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, ++ &tmp, ++ sizeof(tmp))) ++ dev_warn_once(fb->fb.dev, ++ "Set display number call failed. Old GPU firmware?"); ++ } ++} ++ + static int bcm2708_fb_set_bitfields(struct fb_var_screeninfo *var) + { + int ret = 0; +@@ -222,11 +316,11 @@ static int bcm2708_fb_check_var(struct f + struct fb_info *info) + { + /* info input, var output */ +- print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", ++ print_debug("%s(%p) %ux%u (%ux%u), %ul, %u\n", + __func__, info, info->var.xres, info->var.yres, + info->var.xres_virtual, info->var.yres_virtual, +- (int)info->screen_size, info->var.bits_per_pixel); +- print_debug("%s(%p) %dx%d (%dx%d), %d\n", __func__, var, var->xres, ++ info->screen_size, info->var.bits_per_pixel); ++ print_debug("%s(%p) %ux%u (%ux%u), %u\n", __func__, var, var->xres, + var->yres, var->xres_virtual, var->yres_virtual, + var->bits_per_pixel); + +@@ -283,23 +377,96 @@ static int bcm2708_fb_set_par(struct fb_ + .xoffset = info->var.xoffset, + .yoffset = info->var.yoffset, + .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, +- .base = 0, +- .screen_size = 0, +- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, +- .pitch = 0, ++ /* base and screen_size will be initialised later */ ++ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, ++ /* pitch will be initialised later */ + }; +- int ret; ++ int ret, image_size; ++ + +- print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", __func__, info, ++ print_debug("%s(%p) %dx%d (%dx%d), %d, %d (display %d)\n", __func__, ++ info, + info->var.xres, info->var.yres, info->var.xres_virtual, + info->var.yres_virtual, (int)info->screen_size, +- info->var.bits_per_pixel); ++ info->var.bits_per_pixel, value); ++ ++ /* Need to set the display number to act on first ++ * Cannot do it in the tag list because on older firmware the call ++ * will fail and stop the rest of the list being executed. ++ * We can ignore this call failing as the default at other end is 0 ++ */ ++ set_display_num(fb); ++ ++ /* Try allocating our own buffer. We can specify all the parameters */ ++ image_size = ((info->var.xres * info->var.yres) * ++ info->var.bits_per_pixel) >> 3; ++ ++ if (!fb->fbdev->disable_arm_alloc && ++ (image_size != fb->image_size || !fb->dma_addr)) { ++ if (fb->dma_addr) { ++ dma_free_coherent(info->device, fb->image_size, ++ fb->cpuaddr, fb->dma_addr); ++ fb->image_size = 0; ++ fb->cpuaddr = NULL; ++ fb->dma_addr = 0; ++ } ++ ++ fb->cpuaddr = dma_alloc_coherent(info->device, image_size, ++ &fb->dma_addr, GFP_KERNEL); ++ ++ if (!fb->cpuaddr) { ++ fb->dma_addr = 0; ++ fb->fbdev->disable_arm_alloc = true; ++ } else { ++ fb->image_size = image_size; ++ } ++ } ++ ++ if (fb->cpuaddr) { ++ fbinfo.base = fb->dma_addr; ++ fbinfo.screen_size = image_size; ++ fbinfo.pitch = (info->var.xres * info->var.bits_per_pixel) >> 3; ++ ++ ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, ++ sizeof(fbinfo)); ++ if (ret || fbinfo.base != fb->dma_addr) { ++ /* Firmware either failed, or assigned a different base ++ * address (ie it doesn't support being passed an FB ++ * allocation). ++ * Destroy the allocation, and don't try again. ++ */ ++ dma_free_coherent(info->device, fb->image_size, ++ fb->cpuaddr, fb->dma_addr); ++ fb->image_size = 0; ++ fb->cpuaddr = NULL; ++ fb->dma_addr = 0; ++ fb->fbdev->disable_arm_alloc = true; ++ } ++ } else { ++ /* Our allocation failed - drop into the old scheme of ++ * allocation by the VPU. ++ */ ++ ret = -ENOMEM; ++ } + +- ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); + if (ret) { +- dev_err(info->device, +- "Failed to allocate GPU framebuffer (%d)\n", ret); +- return ret; ++ /* Old scheme: ++ * - FRAMEBUFFER_ALLOCATE passes 0 for base and screen_size. ++ * - GET_PITCH instead of SET_PITCH. ++ */ ++ fbinfo.base = 0; ++ fbinfo.screen_size = 0; ++ fbinfo.tag6.tag = RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH; ++ fbinfo.pitch = 0; ++ ++ ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, ++ sizeof(fbinfo)); ++ if (ret) { ++ dev_err(info->device, ++ "Failed to allocate GPU framebuffer (%d)\n", ++ ret); ++ return ret; ++ } + } + + if (info->var.bits_per_pixel <= 8) +@@ -314,9 +481,17 @@ static int bcm2708_fb_set_par(struct fb_ + fb->fb.fix.smem_start = fbinfo.base; + fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; + fb->fb.screen_size = fbinfo.screen_size; +- if (fb->fb.screen_base) +- iounmap(fb->fb.screen_base); +- fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); ++ ++ if (!fb->dma_addr) { ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ ++ fb->fb.screen_base = ioremap_wc(fbinfo.base, ++ fb->fb.screen_size); ++ } else { ++ fb->fb.screen_base = fb->cpuaddr; ++ } ++ + if (!fb->fb.screen_base) { + /* the console may currently be locked */ + console_trylock(); +@@ -374,7 +549,10 @@ static int bcm2708_fb_setcolreg(unsigned + packet->length = regno + 1; + memcpy(packet->cmap, fb->gpu_cmap, + sizeof(packet->cmap)); +- ret = rpi_firmware_property(fb->fw, ++ ++ set_display_num(fb); ++ ++ ret = rpi_firmware_property(fb->fbdev->fw, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE, + packet, + (2 + packet->length) * sizeof(u32)); +@@ -413,8 +591,11 @@ static int bcm2708_fb_blank(int blank_mo + return -EINVAL; + } + +- ret = rpi_firmware_property(fb->fw, RPI_FIRMWARE_FRAMEBUFFER_BLANK, ++ set_display_num(fb); ++ ++ ret = rpi_firmware_property(fb->fbdev->fw, RPI_FIRMWARE_FRAMEBUFFER_BLANK, + &value, sizeof(value)); ++ + if (ret) + dev_err(info->device, "%s(%d) failed: %d\n", __func__, + blank_mode, ret); +@@ -431,7 +612,7 @@ static int bcm2708_fb_pan_display(struct + info->var.yoffset = var->yoffset; + result = bcm2708_fb_set_par(info); + if (result != 0) +- pr_err("%s(%d,%d) returns=%d\n", __func__, var->xoffset, ++ pr_err("%s(%u,%u) returns=%d\n", __func__, var->xoffset, + var->yoffset, result); + return result; + } +@@ -439,8 +620,9 @@ static int bcm2708_fb_pan_display(struct + static void dma_memcpy(struct bcm2708_fb *fb, dma_addr_t dst, dma_addr_t src, + int size) + { +- int burst_size = (fb->dma_chan == 0) ? 8 : 2; +- struct bcm2708_dma_cb *cb = fb->cb_base; ++ struct bcm2708_fb_dev *fbdev = fb->fbdev; ++ struct bcm2708_dma_cb *cb = fbdev->cb_base; ++ int burst_size = (fbdev->dma_chan == 0) ? 8 : 2; + + cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | + BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | +@@ -453,21 +635,27 @@ static void dma_memcpy(struct bcm2708_fb + cb->pad[1] = 0; + cb->next = 0; + ++ // Not sure what to do if this gets a signal whilst waiting ++ if (mutex_lock_interruptible(&fbdev->dma_mutex)) ++ return; ++ + if (size < dma_busy_wait_threshold) { +- bcm_dma_start(fb->dma_chan_base, fb->cb_handle); +- bcm_dma_wait_idle(fb->dma_chan_base); ++ bcm_dma_start(fbdev->dma_chan_base, fbdev->cb_handle); ++ bcm_dma_wait_idle(fbdev->dma_chan_base); + } else { +- void __iomem *dma_chan = fb->dma_chan_base; ++ void __iomem *local_dma_chan = fbdev->dma_chan_base; + + cb->info |= BCM2708_DMA_INT_EN; +- bcm_dma_start(fb->dma_chan_base, fb->cb_handle); +- while (bcm_dma_is_busy(dma_chan)) { +- wait_event_interruptible(fb->dma_waitq, +- !bcm_dma_is_busy(dma_chan)); ++ bcm_dma_start(fbdev->dma_chan_base, fbdev->cb_handle); ++ while (bcm_dma_is_busy(local_dma_chan)) { ++ wait_event_interruptible(fbdev->dma_waitq, ++ !bcm_dma_is_busy(local_dma_chan)); + } +- fb->stats.dma_irqs++; ++ fbdev->dma_stats.dma_irqs++; + } +- fb->stats.dma_copies++; ++ fbdev->dma_stats.dma_copies++; ++ ++ mutex_unlock(&fbdev->dma_mutex); + } + + /* address with no aliases */ +@@ -542,10 +730,13 @@ static int bcm2708_ioctl(struct fb_info + + switch (cmd) { + case FBIO_WAITFORVSYNC: +- ret = rpi_firmware_property(fb->fw, ++ set_display_num(fb); ++ ++ ret = rpi_firmware_property(fb->fbdev->fw, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC, + &dummy, sizeof(dummy)); + break; ++ + case FBIODMACOPY: + { + struct fb_dmacopy ioparam; +@@ -615,23 +806,22 @@ static int bcm2708_compat_ioctl(struct f + static void bcm2708_fb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) + { +- /* (is called) print_debug("bcm2708_fb_fillrect\n"); */ + cfb_fillrect(info, rect); + } + + /* A helper function for configuring dma control block */ + static void set_dma_cb(struct bcm2708_dma_cb *cb, +- int burst_size, +- dma_addr_t dst, +- int dst_stride, +- dma_addr_t src, +- int src_stride, +- int w, +- int h) ++ int burst_size, ++ dma_addr_t dst, ++ int dst_stride, ++ dma_addr_t src, ++ int src_stride, ++ int w, ++ int h) + { + cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | +- BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | +- BCM2708_DMA_D_INC | BCM2708_DMA_TDMODE; ++ BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | ++ BCM2708_DMA_D_INC | BCM2708_DMA_TDMODE; + cb->dst = dst; + cb->src = src; + /* +@@ -649,15 +839,19 @@ static void bcm2708_fb_copyarea(struct f + const struct fb_copyarea *region) + { + struct bcm2708_fb *fb = to_bcm2708(info); +- struct bcm2708_dma_cb *cb = fb->cb_base; ++ struct bcm2708_fb_dev *fbdev = fb->fbdev; ++ struct bcm2708_dma_cb *cb = fbdev->cb_base; + int bytes_per_pixel = (info->var.bits_per_pixel + 7) >> 3; + + /* Channel 0 supports larger bursts and is a bit faster */ +- int burst_size = (fb->dma_chan == 0) ? 8 : 2; ++ int burst_size = (fbdev->dma_chan == 0) ? 8 : 2; + int pixels = region->width * region->height; + +- /* Fallback to cfb_copyarea() if we don't like something */ +- if (bytes_per_pixel > 4 || ++ /* If DMA is currently in use (ie being used on another FB), then ++ * rather than wait for it to finish, just use the cfb_copyarea ++ */ ++ if (!mutex_trylock(&fbdev->dma_mutex) || ++ bytes_per_pixel > 4 || + info->var.xres * info->var.yres > 1920 * 1200 || + region->width <= 0 || region->width > info->var.xres || + region->height <= 0 || region->height > info->var.yres || +@@ -684,8 +878,8 @@ static void bcm2708_fb_copyarea(struct f + * 1920x1200 resolution at 32bpp pixel depth. + */ + int y; +- dma_addr_t control_block_pa = fb->cb_handle; +- dma_addr_t scratchbuf = fb->cb_handle + 16 * 1024; ++ dma_addr_t control_block_pa = fbdev->cb_handle; ++ dma_addr_t scratchbuf = fbdev->cb_handle + 16 * 1024; + int scanline_size = bytes_per_pixel * region->width; + int scanlines_per_cb = (64 * 1024 - 16 * 1024) / scanline_size; + +@@ -735,10 +929,10 @@ static void bcm2708_fb_copyarea(struct f + } + set_dma_cb(cb, burst_size, + fb->fb_bus_address + dy * fb->fb.fix.line_length + +- bytes_per_pixel * region->dx, ++ bytes_per_pixel * region->dx, + stride, + fb->fb_bus_address + sy * fb->fb.fix.line_length + +- bytes_per_pixel * region->sx, ++ bytes_per_pixel * region->sx, + stride, + region->width * bytes_per_pixel, + region->height); +@@ -748,32 +942,33 @@ static void bcm2708_fb_copyarea(struct f + cb->next = 0; + + if (pixels < dma_busy_wait_threshold) { +- bcm_dma_start(fb->dma_chan_base, fb->cb_handle); +- bcm_dma_wait_idle(fb->dma_chan_base); ++ bcm_dma_start(fbdev->dma_chan_base, fbdev->cb_handle); ++ bcm_dma_wait_idle(fbdev->dma_chan_base); + } else { +- void __iomem *dma_chan = fb->dma_chan_base; ++ void __iomem *local_dma_chan = fbdev->dma_chan_base; + + cb->info |= BCM2708_DMA_INT_EN; +- bcm_dma_start(fb->dma_chan_base, fb->cb_handle); +- while (bcm_dma_is_busy(dma_chan)) { +- wait_event_interruptible(fb->dma_waitq, +- !bcm_dma_is_busy(dma_chan)); ++ bcm_dma_start(fbdev->dma_chan_base, fbdev->cb_handle); ++ while (bcm_dma_is_busy(local_dma_chan)) { ++ wait_event_interruptible(fbdev->dma_waitq, ++ !bcm_dma_is_busy(local_dma_chan)); + } +- fb->stats.dma_irqs++; ++ fbdev->dma_stats.dma_irqs++; + } +- fb->stats.dma_copies++; ++ fbdev->dma_stats.dma_copies++; ++ ++ mutex_unlock(&fbdev->dma_mutex); + } + + static void bcm2708_fb_imageblit(struct fb_info *info, + const struct fb_image *image) + { +- /* (is called) print_debug("bcm2708_fb_imageblit\n"); */ + cfb_imageblit(info, image); + } + + static irqreturn_t bcm2708_fb_dma_irq(int irq, void *cxt) + { +- struct bcm2708_fb *fb = cxt; ++ struct bcm2708_fb_dev *fbdev = cxt; + + /* FIXME: should read status register to check if this is + * actually interrupting us or not, in case this interrupt +@@ -783,9 +978,9 @@ static irqreturn_t bcm2708_fb_dma_irq(in + */ + + /* acknowledge the interrupt */ +- writel(BCM2708_DMA_INT, fb->dma_chan_base + BCM2708_DMA_CS); ++ writel(BCM2708_DMA_INT, fbdev->dma_chan_base + BCM2708_DMA_CS); + +- wake_up(&fb->dma_waitq); ++ wake_up(&fbdev->dma_waitq); + return IRQ_HANDLED; + } + +@@ -821,11 +1016,23 @@ static int bcm2708_fb_register(struct bc + fb->fb.fix.ywrapstep = 0; + fb->fb.fix.accel = FB_ACCEL_NONE; + +- fb->fb.var.xres = fbwidth; +- fb->fb.var.yres = fbheight; +- fb->fb.var.xres_virtual = fbwidth; +- fb->fb.var.yres_virtual = fbheight; +- fb->fb.var.bits_per_pixel = fbdepth; ++ /* If we have data from the VC4 on FB's, use that, otherwise use the ++ * module parameters ++ */ ++ if (fb->display_settings.width) { ++ fb->fb.var.xres = fb->display_settings.width; ++ fb->fb.var.yres = fb->display_settings.height; ++ fb->fb.var.xres_virtual = fb->fb.var.xres; ++ fb->fb.var.yres_virtual = fb->fb.var.yres; ++ fb->fb.var.bits_per_pixel = fb->display_settings.depth; ++ } else { ++ fb->fb.var.xres = fbwidth; ++ fb->fb.var.yres = fbheight; ++ fb->fb.var.xres_virtual = fbwidth; ++ fb->fb.var.yres_virtual = fbheight; ++ fb->fb.var.bits_per_pixel = fbdepth; ++ } ++ + fb->fb.var.vmode = FB_VMODE_NONINTERLACED; + fb->fb.var.activate = FB_ACTIVATE_NOW; + fb->fb.var.nonstd = 0; +@@ -841,26 +1048,23 @@ static int bcm2708_fb_register(struct bc + fb->fb.monspecs.dclkmax = 100000000; + + bcm2708_fb_set_bitfields(&fb->fb.var); +- init_waitqueue_head(&fb->dma_waitq); + + /* + * Allocate colourmap. + */ +- + fb_set_var(&fb->fb, &fb->fb.var); ++ + ret = bcm2708_fb_set_par(&fb->fb); ++ + if (ret) + return ret; + +- print_debug("BCM2708FB: registering framebuffer (%dx%d@%d) (%d)\n", +- fbwidth, fbheight, fbdepth, fbswap); +- + ret = register_framebuffer(&fb->fb); +- print_debug("BCM2708FB: register framebuffer (%d)\n", ret); ++ + if (ret == 0) + goto out; + +- print_debug("BCM2708FB: cannot register framebuffer (%d)\n", ret); ++ dev_warn(fb->fb.dev, "Unable to register framebuffer (%d)\n", ret); + out: + return ret; + } +@@ -869,10 +1073,18 @@ static int bcm2708_fb_probe(struct platf + { + struct device_node *fw_np; + struct rpi_firmware *fw; +- struct bcm2708_fb *fb; +- int ret; ++ int ret, i; ++ u32 num_displays; ++ struct bcm2708_fb_dev *fbdev; ++ struct { u32 base, length; } gpu_mem; ++ ++ fbdev = devm_kzalloc(&dev->dev, sizeof(*fbdev), GFP_KERNEL); ++ ++ if (!fbdev) ++ return -ENOMEM; + + fw_np = of_parse_phandle(dev->dev.of_node, "firmware", 0); ++ + /* Remove comment when booting without Device Tree is no longer supported + * if (!fw_np) { + * dev_err(&dev->dev, "Missing firmware node\n"); +@@ -880,90 +1092,154 @@ static int bcm2708_fb_probe(struct platf + * } + */ + fw = rpi_firmware_get(fw_np); ++ fbdev->fw = fw; ++ + if (!fw) + return -EPROBE_DEFER; + +- fb = kzalloc(sizeof(*fb), GFP_KERNEL); +- if (!fb) { +- ret = -ENOMEM; +- goto free_region; ++ ret = rpi_firmware_property(fw, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS, ++ &num_displays, sizeof(u32)); ++ ++ /* If we fail to get the number of displays, or it returns 0, then ++ * assume old firmware that doesn't have the mailbox call, so just ++ * set one display ++ */ ++ if (ret || num_displays == 0) { ++ num_displays = 1; ++ dev_err(&dev->dev, ++ "Unable to determine number of FB's. Assuming 1\n"); ++ ret = 0; ++ } else { ++ fbdev->firmware_supports_multifb = 1; + } + +- fb->fw = fw; +- bcm2708_fb_debugfs_init(fb); ++ if (num_displays > MAX_FRAMEBUFFERS) { ++ dev_warn(&dev->dev, ++ "More displays reported from firmware than supported in driver (%u vs %u)", ++ num_displays, MAX_FRAMEBUFFERS); ++ num_displays = MAX_FRAMEBUFFERS; ++ } + +- fb->cb_base = dma_alloc_writecombine(&dev->dev, SZ_64K, +- &fb->cb_handle, GFP_KERNEL); +- if (!fb->cb_base) { ++ dev_info(&dev->dev, "FB found %d display(s)\n", num_displays); ++ ++ /* Set up the DMA information. Note we have just one set of DMA ++ * parameters to work with all the FB's so requires synchronising when ++ * being used ++ */ ++ ++ mutex_init(&fbdev->dma_mutex); ++ ++ fbdev->cb_base = dma_alloc_writecombine(&dev->dev, SZ_64K, ++ &fbdev->cb_handle, ++ GFP_KERNEL); ++ if (!fbdev->cb_base) { + dev_err(&dev->dev, "cannot allocate DMA CBs\n"); + ret = -ENOMEM; + goto free_fb; + } + +- pr_info("BCM2708FB: allocated DMA memory %pad\n", &fb->cb_handle); +- + ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_BULK, +- &fb->dma_chan_base, &fb->dma_irq); ++ &fbdev->dma_chan_base, ++ &fbdev->dma_irq); + if (ret < 0) { +- dev_err(&dev->dev, "couldn't allocate a DMA channel\n"); ++ dev_err(&dev->dev, "Couldn't allocate a DMA channel\n"); + goto free_cb; + } +- fb->dma_chan = ret; ++ fbdev->dma_chan = ret; + +- ret = request_irq(fb->dma_irq, bcm2708_fb_dma_irq, +- 0, "bcm2708_fb dma", fb); ++ ret = request_irq(fbdev->dma_irq, bcm2708_fb_dma_irq, ++ 0, "bcm2708_fb DMA", fbdev); + if (ret) { +- pr_err("%s: failed to request DMA irq\n", __func__); ++ dev_err(&dev->dev, ++ "Failed to request DMA irq\n"); + goto free_dma_chan; + } + +- pr_info("BCM2708FB: allocated DMA channel %d\n", fb->dma_chan); ++ rpi_firmware_property(fbdev->fw, ++ RPI_FIRMWARE_GET_VC_MEMORY, ++ &gpu_mem, sizeof(gpu_mem)); ++ ++ for (i = 0; i < num_displays; i++) { ++ struct bcm2708_fb *fb = &fbdev->displays[i]; ++ ++ fb->display_settings.display_num = i; ++ fb->dev = dev; ++ fb->fb.device = &dev->dev; ++ fb->fbdev = fbdev; ++ ++ fb->gpu.base = gpu_mem.base; ++ fb->gpu.length = gpu_mem.length; ++ ++ if (fbdev->firmware_supports_multifb) { ++ ret = rpi_firmware_property(fw, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_SETTINGS, ++ &fb->display_settings, ++ GET_DISPLAY_SETTINGS_PAYLOAD_SIZE); ++ } else { ++ memset(&fb->display_settings, 0, ++ sizeof(fb->display_settings)); ++ } ++ ++ ret = bcm2708_fb_register(fb); + +- fb->dev = dev; +- fb->fb.device = &dev->dev; ++ if (ret == 0) { ++ bcm2708_fb_debugfs_init(fb); + +- /* failure here isn't fatal, but we'll fail in vc_mem_copy if +- * fb->gpu is not valid +- */ +- rpi_firmware_property(fb->fw, RPI_FIRMWARE_GET_VC_MEMORY, &fb->gpu, +- sizeof(fb->gpu)); ++ fbdev->num_displays++; + +- ret = bcm2708_fb_register(fb); +- if (ret == 0) { +- platform_set_drvdata(dev, fb); +- goto out; ++ dev_info(&dev->dev, ++ "Registered framebuffer for display %u, size %ux%u\n", ++ fb->display_settings.display_num, ++ fb->fb.var.xres, ++ fb->fb.var.yres); ++ } else { ++ // Use this to flag if this FB entry is in use. ++ fb->fbdev = NULL; ++ } ++ } ++ ++ // Did we actually successfully create any FB's? ++ if (fbdev->num_displays) { ++ init_waitqueue_head(&fbdev->dma_waitq); ++ platform_set_drvdata(dev, fbdev); ++ return ret; + } + + free_dma_chan: +- bcm_dma_chan_free(fb->dma_chan); ++ bcm_dma_chan_free(fbdev->dma_chan); + free_cb: +- dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); ++ dma_free_writecombine(&dev->dev, SZ_64K, fbdev->cb_base, ++ fbdev->cb_handle); + free_fb: +- kfree(fb); +-free_region: + dev_err(&dev->dev, "probe failed, err %d\n", ret); +-out: ++ + return ret; + } + + static int bcm2708_fb_remove(struct platform_device *dev) + { +- struct bcm2708_fb *fb = platform_get_drvdata(dev); ++ struct bcm2708_fb_dev *fbdev = platform_get_drvdata(dev); ++ int i; + + platform_set_drvdata(dev, NULL); + +- if (fb->fb.screen_base) +- iounmap(fb->fb.screen_base); +- unregister_framebuffer(&fb->fb); +- +- dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); +- bcm_dma_chan_free(fb->dma_chan); +- +- bcm2708_fb_debugfs_deinit(fb); ++ for (i = 0; i < fbdev->num_displays; i++) { ++ if (fbdev->displays[i].fb.screen_base) ++ iounmap(fbdev->displays[i].fb.screen_base); ++ ++ if (fbdev->displays[i].fbdev) { ++ unregister_framebuffer(&fbdev->displays[i].fb); ++ bcm2708_fb_debugfs_deinit(&fbdev->displays[i]); ++ } ++ } + +- free_irq(fb->dma_irq, fb); ++ dma_free_writecombine(&dev->dev, SZ_64K, fbdev->cb_base, ++ fbdev->cb_handle); ++ bcm_dma_chan_free(fbdev->dma_chan); ++ free_irq(fbdev->dma_irq, fbdev); + +- kfree(fb); ++ mutex_destroy(&fbdev->dma_mutex); + + return 0; + } +@@ -978,10 +1254,10 @@ static struct platform_driver bcm2708_fb + .probe = bcm2708_fb_probe, + .remove = bcm2708_fb_remove, + .driver = { +- .name = DRIVER_NAME, +- .owner = THIS_MODULE, +- .of_match_table = bcm2708_fb_of_match_table, +- }, ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2708_fb_of_match_table, ++ }, + }; + + static int __init bcm2708_fb_init(void) +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -138,9 +138,11 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, + RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, + RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, ++ + RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, + RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, +@@ -159,6 +161,8 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, + }; + ++#define GET_DISPLAY_SETTINGS_PAYLOAD_SIZE 64 ++ + #if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE) + int rpi_firmware_property(struct rpi_firmware *fw, + u32 tag, void *data, size_t len); diff --git a/target/linux/brcm2708/patches-4.19/950-0583-drm-v3d-Update-to-upstream-IRQ-code.patch b/target/linux/brcm2708/patches-4.19/950-0583-drm-v3d-Update-to-upstream-IRQ-code.patch deleted file mode 100644 index c3e547aa3d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0583-drm-v3d-Update-to-upstream-IRQ-code.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 50088003d803f04e536eb09ac2635df35b5c8ae4 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Tue, 12 Mar 2019 09:08:10 -0700 -Subject: [PATCH 583/806] drm/v3d: Update to upstream IRQ code. - ---- - drivers/gpu/drm/v3d/v3d_irq.c | 25 +++++++++++++++---------- - 1 file changed, 15 insertions(+), 10 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_irq.c -+++ b/drivers/gpu/drm/v3d/v3d_irq.c -@@ -168,7 +168,7 @@ v3d_hub_irq(int irq, void *arg) - int - v3d_irq_init(struct v3d_dev *v3d) - { -- int ret, core; -+ int irq1, ret, core; - - INIT_WORK(&v3d->overflow_mem_work, v3d_overflow_mem_work); - -@@ -179,24 +179,29 @@ v3d_irq_init(struct v3d_dev *v3d) - V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS); - V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS); - -- if (platform_get_irq(v3d->pdev, 1) < 0) { -- ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), -+ irq1 = platform_get_irq(v3d->pdev, 1); -+ if (irq1 == -EPROBE_DEFER) -+ return irq1; -+ if (irq1 > 0) { -+ ret = devm_request_irq(v3d->dev, irq1, - v3d_irq, IRQF_SHARED, -- "v3d", v3d); -- v3d->single_irq_line = true; -- } else { -+ "v3d_core0", v3d); -+ if (ret) -+ goto fail; - ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), - v3d_hub_irq, IRQF_SHARED, - "v3d_hub", v3d); - if (ret) - goto fail; -+ } else { -+ v3d->single_irq_line = true; - -- ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 1), -+ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), - v3d_irq, IRQF_SHARED, -- "v3d_core0", v3d); -+ "v3d", v3d); -+ if (ret) -+ goto fail; - } -- if (ret) -- goto fail; - - v3d_irq_enable(v3d); - return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0584-ARM-dts-bcm283x-Move-BCM2835-6-7-specific-to-bcm2835.patch b/target/linux/brcm2708/patches-4.19/950-0584-ARM-dts-bcm283x-Move-BCM2835-6-7-specific-to-bcm2835.patch new file mode 100644 index 0000000000..e3ee39abba --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0584-ARM-dts-bcm283x-Move-BCM2835-6-7-specific-to-bcm2835.patch @@ -0,0 +1,189 @@ +From 545c00748a070340e9669740e45afc2672e1fcb6 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren +Date: Sun, 19 May 2019 12:26:21 +0200 +Subject: [PATCH] ARM: dts: bcm283x: Move BCM2835/6/7 specific to + bcm2835-common.dtsi + +We want all common BCM2835/6/7/8 functions in bcm283x.dtsi and all +BCM2835/6/7 specific in the new bcm2835-common.dtsi. + +Signed-off-by: Stefan Wahren +--- + arch/arm/boot/dts/bcm2835-common.dtsi | 53 +++++++++++++++++++++++++++ + arch/arm/boot/dts/bcm2835.dtsi | 1 + + arch/arm/boot/dts/bcm2836.dtsi | 1 + + arch/arm/boot/dts/bcm2837.dtsi | 1 + + arch/arm/boot/dts/bcm283x.dtsi | 43 +--------------------- + 5 files changed, 57 insertions(+), 42 deletions(-) + create mode 100644 arch/arm/boot/dts/bcm2835-common.dtsi + +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2835-common.dtsi +@@ -0,0 +1,53 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++/* This include file covers the common peripherals and configuration between ++ * bcm2835, bcm2836 and bcm2837 implementations. ++ */ ++ ++/ { ++ soc { ++ timer@7e003000 { ++ compatible = "brcm,bcm2835-system-timer"; ++ reg = <0x7e003000 0x1000>; ++ interrupts = <1 0>, <1 1>, <1 2>, <1 3>; ++ /* This could be a reference to BCM2835_CLOCK_TIMER, ++ * but we don't have the driver using the common clock ++ * support yet. ++ */ ++ clock-frequency = <1000000>; ++ }; ++ ++ intc: interrupt-controller@7e00b200 { ++ compatible = "brcm,bcm2835-armctrl-ic"; ++ reg = <0x7e00b200 0x200>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ thermal: thermal@7e212000 { ++ compatible = "brcm,bcm2835-thermal"; ++ reg = <0x7e212000 0x8>; ++ clocks = <&clocks BCM2835_CLOCK_TSENS>; ++ #thermal-sensor-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ v3d: v3d@7ec00000 { ++ compatible = "brcm,bcm2835-v3d"; ++ reg = <0x7ec00000 0x1000>; ++ interrupts = <1 10>; ++ }; ++ }; ++}; ++ ++&gpio { ++ i2c_slave_gpio18: i2c_slave_gpio18 { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = ; ++ }; ++ ++ jtag_gpio4: jtag_gpio4 { ++ brcm,pins = <4 5 6 12 13>; ++ brcm,function = ; ++ }; ++}; +--- a/arch/arm/boot/dts/bcm2835.dtsi ++++ b/arch/arm/boot/dts/bcm2835.dtsi +@@ -1,5 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0 + #include "bcm283x.dtsi" ++#include "bcm2835-common.dtsi" + + / { + compatible = "brcm,bcm2835"; +--- a/arch/arm/boot/dts/bcm2836.dtsi ++++ b/arch/arm/boot/dts/bcm2836.dtsi +@@ -1,5 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0 + #include "bcm283x.dtsi" ++#include "bcm2835-common.dtsi" + + / { + compatible = "brcm,bcm2836"; +--- a/arch/arm/boot/dts/bcm2837.dtsi ++++ b/arch/arm/boot/dts/bcm2837.dtsi +@@ -1,4 +1,5 @@ + #include "bcm283x.dtsi" ++#include "bcm2835-common.dtsi" + + / { + compatible = "brcm,bcm2837"; +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -55,17 +55,6 @@ + #address-cells = <1>; + #size-cells = <1>; + +- timer@7e003000 { +- compatible = "brcm,bcm2835-system-timer"; +- reg = <0x7e003000 0x1000>; +- interrupts = <1 0>, <1 1>, <1 2>, <1 3>; +- /* This could be a reference to BCM2835_CLOCK_TIMER, +- * but we don't have the driver using the common clock +- * support yet. +- */ +- clock-frequency = <1000000>; +- }; +- + txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; +@@ -113,13 +102,6 @@ + brcm,dma-channel-mask = <0x7f35>; + }; + +- intc: interrupt-controller@7e00b200 { +- compatible = "brcm,bcm2835-armctrl-ic"; +- reg = <0x7e00b200 0x200>; +- interrupt-controller; +- #interrupt-cells = <2>; +- }; +- + watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; +@@ -183,8 +165,7 @@ + interrupt-controller; + #interrupt-cells = <2>; + +- /* Defines pin muxing groups according to +- * BCM2835-ARM-Peripherals.pdf page 102. ++ /* Defines common pin muxing groups + * + * While each pin can have its mux selected + * for various functions individually, some +@@ -262,15 +243,7 @@ + brcm,pins = <44 45>; + brcm,function = ; + }; +- i2c_slave_gpio18: i2c_slave_gpio18 { +- brcm,pins = <18 19 20 21>; +- brcm,function = ; +- }; + +- jtag_gpio4: jtag_gpio4 { +- brcm,pins = <4 5 6 12 13>; +- brcm,function = ; +- }; + jtag_gpio22: jtag_gpio22 { + brcm,pins = <22 23 24 25 26 27>; + brcm,function = ; +@@ -487,14 +460,6 @@ + + }; + +- thermal: thermal@7e212000 { +- compatible = "brcm,bcm2835-thermal"; +- reg = <0x7e212000 0x8>; +- clocks = <&clocks BCM2835_CLOCK_TSENS>; +- #thermal-sensor-cells = <0>; +- status = "disabled"; +- }; +- + aux: aux@7e215000 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; +@@ -660,12 +625,6 @@ + phy-names = "usb2-phy"; + }; + +- v3d: v3d@7ec00000 { +- compatible = "brcm,bcm2835-v3d"; +- reg = <0x7ec00000 0x1000>; +- interrupts = <1 10>; +- }; +- + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0584-drm-v3d-Rename-the-fence-signaled-from-IRQs-to-irq_f.patch b/target/linux/brcm2708/patches-4.19/950-0584-drm-v3d-Rename-the-fence-signaled-from-IRQs-to-irq_f.patch deleted file mode 100644 index 3cb72bdefa..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0584-drm-v3d-Rename-the-fence-signaled-from-IRQs-to-irq_f.patch +++ /dev/null @@ -1,117 +0,0 @@ -From 0d00e0340c1aa9ce36bdff46f927916fe4903cee Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 27 Dec 2018 14:04:44 -0800 -Subject: [PATCH 584/806] drm/v3d: Rename the fence signaled from IRQs to - "irq_fence". - -We have another thing called the "done fence" that tracks when the -scheduler considers the job done, and having the shared name was -confusing. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/v3d/v3d_drv.h | 4 ++-- - drivers/gpu/drm/v3d/v3d_gem.c | 6 +++--- - drivers/gpu/drm/v3d/v3d_irq.c | 6 +++--- - drivers/gpu/drm/v3d/v3d_sched.c | 12 ++++++------ - 4 files changed, 14 insertions(+), 14 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_drv.h -+++ b/drivers/gpu/drm/v3d/v3d_drv.h -@@ -182,7 +182,7 @@ struct v3d_job { - struct dma_fence *in_fence; - - /* v3d fence to be signaled by IRQ handler when the job is complete. */ -- struct dma_fence *done_fence; -+ struct dma_fence *irq_fence; - - /* GPU virtual addresses of the start/end of the CL job. */ - u32 start, end; -@@ -229,7 +229,7 @@ struct v3d_tfu_job { - struct dma_fence *in_fence; - - /* v3d fence to be signaled by IRQ handler when the job is complete. */ -- struct dma_fence *done_fence; -+ struct dma_fence *irq_fence; - - struct v3d_dev *v3d; - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -381,8 +381,8 @@ v3d_exec_cleanup(struct kref *ref) - dma_fence_put(exec->bin.in_fence); - dma_fence_put(exec->render.in_fence); - -- dma_fence_put(exec->bin.done_fence); -- dma_fence_put(exec->render.done_fence); -+ dma_fence_put(exec->bin.irq_fence); -+ dma_fence_put(exec->render.irq_fence); - - dma_fence_put(exec->bin_done_fence); - dma_fence_put(exec->render_done_fence); -@@ -411,7 +411,7 @@ v3d_tfu_job_cleanup(struct kref *ref) - unsigned int i; - - dma_fence_put(job->in_fence); -- dma_fence_put(job->done_fence); -+ dma_fence_put(job->irq_fence); - - for (i = 0; i < ARRAY_SIZE(job->bo); i++) { - if (job->bo[i]) ---- a/drivers/gpu/drm/v3d/v3d_irq.c -+++ b/drivers/gpu/drm/v3d/v3d_irq.c -@@ -93,7 +93,7 @@ v3d_irq(int irq, void *arg) - - if (intsts & V3D_INT_FLDONE) { - struct v3d_fence *fence = -- to_v3d_fence(v3d->bin_job->bin.done_fence); -+ to_v3d_fence(v3d->bin_job->bin.irq_fence); - - trace_v3d_bcl_irq(&v3d->drm, fence->seqno); - dma_fence_signal(&fence->base); -@@ -102,7 +102,7 @@ v3d_irq(int irq, void *arg) - - if (intsts & V3D_INT_FRDONE) { - struct v3d_fence *fence = -- to_v3d_fence(v3d->render_job->render.done_fence); -+ to_v3d_fence(v3d->render_job->render.irq_fence); - - trace_v3d_rcl_irq(&v3d->drm, fence->seqno); - dma_fence_signal(&fence->base); -@@ -138,7 +138,7 @@ v3d_hub_irq(int irq, void *arg) - - if (intsts & V3D_HUB_INT_TFUC) { - struct v3d_fence *fence = -- to_v3d_fence(v3d->tfu_job->done_fence); -+ to_v3d_fence(v3d->tfu_job->irq_fence); - - trace_v3d_tfu_irq(&v3d->drm, fence->seqno); - dma_fence_signal(&fence->base); ---- a/drivers/gpu/drm/v3d/v3d_sched.c -+++ b/drivers/gpu/drm/v3d/v3d_sched.c -@@ -152,9 +152,9 @@ static struct dma_fence *v3d_job_run(str - if (IS_ERR(fence)) - return NULL; - -- if (job->done_fence) -- dma_fence_put(job->done_fence); -- job->done_fence = dma_fence_get(fence); -+ if (job->irq_fence) -+ dma_fence_put(job->irq_fence); -+ job->irq_fence = dma_fence_get(fence); - - trace_v3d_submit_cl(dev, q == V3D_RENDER, to_v3d_fence(fence)->seqno, - job->start, job->end); -@@ -195,9 +195,9 @@ v3d_tfu_job_run(struct drm_sched_job *sc - return NULL; - - v3d->tfu_job = job; -- if (job->done_fence) -- dma_fence_put(job->done_fence); -- job->done_fence = dma_fence_get(fence); -+ if (job->irq_fence) -+ dma_fence_put(job->irq_fence); -+ job->irq_fence = dma_fence_get(fence); - - trace_v3d_submit_tfu(dev, to_v3d_fence(fence)->seqno); - diff --git a/target/linux/brcm2708/patches-4.19/950-0585-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch b/target/linux/brcm2708/patches-4.19/950-0585-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch new file mode 100644 index 0000000000..16980a8ba3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0585-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch @@ -0,0 +1,1129 @@ +From ff78cbcd8d7d656a5f43abd2c744e610b8c6c740 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 29 May 2019 13:54:21 +0100 +Subject: [PATCH] ARM: dts: Add bcm2711-rpi-4-b.dts and components + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 320 ++++++++++++ + arch/arm/boot/dts/bcm2711.dtsi | 50 ++ + arch/arm/boot/dts/bcm2838.dtsi | 724 ++++++++++++++++++++++++++ + 4 files changed, 1095 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts + create mode 100644 arch/arm/boot/dts/bcm2711.dtsi + create mode 100644 arch/arm/boot/dts/bcm2838.dtsi + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2708-rpi-zero-w.dtb \ + bcm2709-rpi-2-b.dtb \ + bcm2710-rpi-3-b.dtb \ ++ bcm2711-rpi-4-b.dtb \ + bcm2710-rpi-3-b-plus.dtb \ + bcm2710-rpi-cm3.dtb + +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -0,0 +1,320 @@ ++/dts-v1/; ++ ++#include "bcm2711.dtsi" ++ ++/ { ++ compatible = "raspberrypi,4-model-b", "brcm,bcm2838", "brcm,bcm2837"; ++ model = "Raspberry Pi 4 Model B"; ++ #address-cells = <2>; ++ #size-cells = <1>; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0>; ++ }; ++ ++ chosen { ++ bootargs = "8250.nr_uarts=1 cma=64M"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc0 = &emmc2; ++ mmc1 = &mmcnr; ++ mmc2 = &sdhost; ++ /delete-property/ ethernet; ++ /delete-property/ intc; ++ ethernet0 = &genet; ++ }; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&firmware { ++ expgpio: expgpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ status = "okay"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++// ============================================= ++// Board specific stuff here ++ ++/ { ++ ++ sd_io_1v8_reg: sd_io_1v8_reg { ++ status = "okay"; ++ compatible = "regulator-gpio"; ++ vin-supply = <&vdd_5v0_reg>; ++ regulator-name = "vdd-sd-io"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-settling-time-us = <5000>; ++ ++ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; ++ states = <1800000 0x1 ++ 3300000 0x0>; ++ }; ++}; ++ ++&sdhost { ++ status = "disabled"; ++}; ++ ++&emmc2 { ++ status = "okay"; ++ broken-cd; ++ vqmmc-supply = <&sd_io_1v8_reg>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 42 0>; ++ }; ++ ++ pwr_led: pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&expgpio 2 0>; ++ }; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&sdhost_gpio48 { ++ brcm,pins = <22 23 24 25 26 27>; ++ brcm,function = ; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = ; ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = ; ++ }; ++ ++ spi3_pins: spi3_pins { ++ brcm,pins = <1 2 3>; ++ brcm,function = ; ++ }; ++ ++ spi3_cs_pins: spi3_cs_pins { ++ brcm,pins = <0 24>; ++ brcm,function = ; ++ }; ++ ++ spi4_pins: spi4_pins { ++ brcm,pins = <5 6 7>; ++ brcm,function = ; ++ }; ++ ++ spi4_cs_pins: spi4_cs_pins { ++ brcm,pins = <4 25>; ++ brcm,function = ; ++ }; ++ ++ spi5_pins: spi5_pins { ++ brcm,pins = <13 14 15>; ++ brcm,function = ; ++ }; ++ ++ spi5_cs_pins: spi5_cs_pins { ++ brcm,pins = <12 26>; ++ brcm,function = ; ++ }; ++ ++ spi6_pins: spi6_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = ; ++ }; ++ ++ spi6_cs_pins: spi6_cs_pins { ++ brcm,pins = <18 27>; ++ brcm,function = ; ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = ; ++ }; ++ ++ i2c3_pins: i2c3 { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ }; ++ ++ i2c4_pins: i2c4 { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ }; ++ ++ i2c5_pins: i2c5 { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ }; ++ ++ i2c6_pins: i2c6 { ++ brcm,pins = <22 23>; ++ brcm,function = ; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = ; ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = ; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0 ++ // to fool pinctrl ++ brcm,function = <0>; ++ brcm,pull = <2>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart2_pins: uart2_pins { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart3_pins: uart3_pins { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart4_pins: uart4_pins { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart5_pins: uart5_pins { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 41>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2711.dtsi +@@ -0,0 +1,50 @@ ++#include "bcm2838.dtsi" ++#include "bcm270x.dtsi" ++#include "bcm2708-rpi.dtsi" ++ ++/ { ++ soc { ++ /delete-node/ mailbox@7e00b840; ++ /delete-node/ v3d@7ec00000; ++ }; ++ ++ __overrides__ { ++ arm_freq; ++ }; ++}; ++ ++&dma { ++ brcm,dma-channel-mask = <0x7ef5>; ++}; ++ ++&txp { ++ interrupts = ; ++}; ++ ++&firmwarekms { ++ interrupts = ; ++}; ++ ++&smi { ++ interrupts = ; ++}; ++ ++&mmc { ++ interrupts = ; ++}; ++ ++&mmcnr { ++ interrupts = ; ++}; ++ ++&usb { ++ reg = <0x7e980000 0x10000>, ++ <0x7e00b200 0x200>; ++ interrupts = , ++ ; ++}; ++ ++&gpio { ++ interrupts = , ++ ; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2838.dtsi +@@ -0,0 +1,724 @@ ++// SPDX-License-Identifier: GPL-2.0 ++#include "bcm283x.dtsi" ++ ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm2838", "brcm,bcm2837"; ++ ++ interrupt-parent = <&gicv2>; ++ ++ soc { ++ ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, ++ <0x7c000000 0x0 0xfc000000 0x02000000>, ++ <0x40000000 0x0 0xff800000 0x00800000>; ++ /* Emulate a contiguous 30-bit address range for DMA */ ++ dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; ++ ++ /delete-node/ mailbox@7e00b840; ++ /delete-node/ interrupt-controller@7e00f300; ++ ++ local_intc: local_intc@40000000 { ++ compatible = "brcm,bcm2836-l1-intc"; ++ reg = <0x40000000 0x100>; ++ }; ++ ++ gicv2: gic400@40041000 { ++ interrupt-controller; ++ #interrupt-cells = <3>; ++ compatible = "arm,gic-400"; ++ reg = <0x40041000 0x1000>, ++ <0x40042000 0x2000>, ++ <0x40046000 0x2000>, ++ <0x40048000 0x2000>; ++ }; ++ ++ thermal: thermal@7d5d2200 { ++ compatible = "brcm,avs-tmon-bcm2838"; ++ reg = <0x7d5d2200 0x2c>; ++ interrupts = ; ++ interrupt-names = "tmon"; ++ clocks = <&clocks BCM2835_CLOCK_TSENS>; ++ #thermal-sensor-cells = <0>; ++ status = "okay"; ++ }; ++ ++ pm: watchdog@7e100000 { ++ reg = <0x7e100000 0x114>, ++ <0x7e00a000 0x24>, ++ <0x7ec11000 0x20>; ++ }; ++ ++ rng@7e104000 { ++ interrupts = ; ++ }; ++ ++ uart2: serial@7e201400 { ++ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; ++ reg = <0x7e201400 0x200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_UART>, ++ <&clocks BCM2835_CLOCK_VPU>; ++ clock-names = "uartclk", "apb_pclk"; ++ arm,primecell-periphid = <0x00241011>; ++ status = "disabled"; ++ }; ++ ++ uart3: serial@7e201600 { ++ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; ++ reg = <0x7e201600 0x200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_UART>, ++ <&clocks BCM2835_CLOCK_VPU>; ++ clock-names = "uartclk", "apb_pclk"; ++ arm,primecell-periphid = <0x00241011>; ++ status = "disabled"; ++ }; ++ ++ uart4: serial@7e201800 { ++ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; ++ reg = <0x7e201800 0x200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_UART>, ++ <&clocks BCM2835_CLOCK_VPU>; ++ clock-names = "uartclk", "apb_pclk"; ++ arm,primecell-periphid = <0x00241011>; ++ status = "disabled"; ++ }; ++ ++ uart5: serial@7e201a00 { ++ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; ++ reg = <0x7e201a00 0x200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_UART>, ++ <&clocks BCM2835_CLOCK_VPU>; ++ clock-names = "uartclk", "apb_pclk"; ++ arm,primecell-periphid = <0x00241011>; ++ status = "disabled"; ++ }; ++ ++ spi@7e204000 { ++ reg = <0x7e204000 0x0200>; ++ interrupts = ; ++ }; ++ ++ spi3: spi@7e204600 { ++ compatible = "brcm,bcm2835-spi"; ++ reg = <0x7e204600 0x0200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ spi4: spi@7e204800 { ++ compatible = "brcm,bcm2835-spi"; ++ reg = <0x7e204800 0x0200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ spi5: spi@7e204a00 { ++ compatible = "brcm,bcm2835-spi"; ++ reg = <0x7e204a00 0x0200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ spi6: spi@7e204c00 { ++ compatible = "brcm,bcm2835-spi"; ++ reg = <0x7e204c00 0x0200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ i2c3: i2c@7e205600 { ++ compatible = "brcm,bcm2835-i2c"; ++ reg = <0x7e205600 0x200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ i2c4: i2c@7e205800 { ++ compatible = "brcm,bcm2835-i2c"; ++ reg = <0x7e205800 0x200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ i2c5: i2c@7e205a00 { ++ compatible = "brcm,bcm2835-i2c"; ++ reg = <0x7e205a00 0x200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ i2c6: i2c@7e205c00 { ++ compatible = "brcm,bcm2835-i2c"; ++ reg = <0x7e205c00 0x200>; ++ interrupts = ; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ pixelvalve@7e206000 { ++ interrupts = ; ++ }; ++ ++ pixelvalve@7e207000 { ++ interrupts = ; ++ }; ++ ++ emmc2: emmc2@7e340000 { ++ compatible = "brcm,bcm2711-emmc2"; ++ status = "okay"; ++ interrupts = ; ++ clocks = <&clocks BCM2838_CLOCK_EMMC2>; ++ reg = <0x7e340000 0x100>; ++ }; ++ ++ hvs@7e400000 { ++ interrupts = ; ++ }; ++ ++ pixelvalve@7e807000 { ++ interrupts = ; ++ }; ++ }; ++ ++ arm-pmu { ++ /* ++ * N.B. the A72 PMU support only exists in arch/arm64, hence ++ * the fallback to the A53 version. ++ */ ++ compatible = "arm,cortex-a72-pmu", "arm,cortex-a53-pmu"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ timer { ++ compatible = "arm,armv7-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ arm,cpu-registers-not-fw-configured; ++ always-on; ++ }; ++ ++ cpus: cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit ++ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ reg = <0>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000d8>; ++ }; ++ ++ cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ reg = <1>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000e0>; ++ }; ++ ++ cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ reg = <2>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000e8>; ++ }; ++ ++ cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ reg = <3>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000f0>; ++ }; ++ }; ++ ++ v3dbus { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x7c500000 0x0 0xfc500000 0x03300000>, ++ <0x40000000 0x0 0xff800000 0x00800000>; ++ dma-ranges = <0x00000000 0x0 0x00000000 0x3c000000>; ++ ++ v3d: v3d@7ec04000 { ++ compatible = "brcm,2711-v3d"; ++ reg = ++ <0x7ec00000 0x4000>, ++ <0x7ec04000 0x4000>; ++ reg-names = "hub", "core0"; ++ ++ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; ++ resets = <&pm BCM2835_RESET_V3D>; ++ clocks = <&clocks BCM2835_CLOCK_V3D>; ++ interrupts = ; ++ status = "okay"; ++ }; ++ }; ++ ++ scb: scb { ++ compatible = "simple-bus"; ++ #address-cells = <2>; ++ #size-cells = <1>; ++ ++ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, ++ <0x0 0x40000000 0x0 0xff800000 0x00800000>, ++ <0x6 0x00000000 0x6 0x00000000 0x40000000>, ++ <0x0 0x00000000 0x0 0x00000000 0xfc000000>; ++ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0xfc000000>; ++ ++ pcie_0: pcie@7d500000 { ++ reg = <0x0 0x7d500000 0x9310>, ++ <0x0 0x7e00f300 0x20>; ++ msi-controller; ++ msi-parent = <&pcie_0>; ++ #address-cells = <3>; ++ #interrupt-cells = <1>; ++ #size-cells = <2>; ++ bus-range = <0x0 0x01>; ++ compatible = "brcm,bcm7211-pcie", "brcm,bcm7445-pcie", ++ "brcm,pci-plat-dev"; ++ max-link-speed = <2>; ++ tot-num-pcie = <1>; ++ linux,pci-domain = <0>; ++ interrupts = , ++ ; ++ interrupt-names = "pcie", "msi"; ++ interrupt-map-mask = <0x0 0x0 0x0 0x7>; ++ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 ++ IRQ_TYPE_LEVEL_HIGH ++ 0 0 0 2 &gicv2 GIC_SPI 144 ++ IRQ_TYPE_LEVEL_HIGH ++ 0 0 0 3 &gicv2 GIC_SPI 145 ++ IRQ_TYPE_LEVEL_HIGH ++ 0 0 0 4 &gicv2 GIC_SPI 146 ++ IRQ_TYPE_LEVEL_HIGH>; ++ ++ /* Map outbound accesses from scb:0x6_00000000-03ffffff ++ * to pci:0x0_f8000000-fbffffff ++ */ ++ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 ++ 0x0 0x04000000>; ++ /* Map inbound accesses from pci:0x0_00000000..ffffffff ++ * to scb:0x0_00000000-ffffffff ++ */ ++ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 ++ 0x1 0x00000000>; ++ status = "okay"; ++ }; ++ ++ genet: genet@7d580000 { ++ compatible = "brcm,genet-v5"; ++ reg = <0x0 0x7d580000 0x10000>; ++ status = "okay"; ++ #address-cells = <0x1>; ++ #size-cells = <0x1>; ++ interrupts = , ++ ; ++ phy-handle = <&phy1>; ++ phy-mode = "rgmii"; ++ mdio@e14 { ++ #address-cells = <0x0>; ++ #size-cells = <0x1>; ++ compatible = "brcm,genet-mdio-v5"; ++ reg = <0xe14 0x8>; ++ reg-names = "mdio"; ++ phy1: genet-phy@0 { ++ compatible = ++ "ethernet-phy-ieee802.3-c22"; ++ /* No interrupts - use PHY_POLL */ ++ max-speed = <1000>; ++ reg = <0x1>; ++ }; ++ }; ++ }; ++ ++ xhci: xhci@7e9c0000 { ++ compatible = "generic-xhci"; ++ status = "disabled"; ++ reg = <0x0 0x7e9c0000 0x100000>; ++ interrupts = ; ++ }; ++ ++ vchiq: mailbox@7e00b840 { ++ compatible = "brcm,bcm2838-vchiq"; ++ reg = <0 0x7e00b840 0x3c>; ++ interrupts = ; ++ }; ++ ++ hevc-decoder@7eb00000 { ++ compatible = "raspberrypi,argon-hevc-decoder"; ++ reg = <0x0 0x7eb00000 0x10000>; ++ status = "okay"; ++ }; ++ ++ argon-local-intc@7eb10000 { ++ compatible = "raspberrypi,argon-local-intc"; ++ reg = <0x0 0x7eb10000 0x1000>; ++ status = "okay"; ++ interrupts = ; ++ }; ++ ++ h264-decoder@7eb20000 { ++ compatible = "raspberrypi,argon-h264-decoder"; ++ reg = <0x0 0x7eb20000 0x10000>; ++ status = "okay"; ++ }; ++ ++ vp9-decoder@7eb30000 { ++ compatible = "raspberrypi,argon-vp9-decoder"; ++ reg = <0x0 0x7eb30000 0x10000>; ++ status = "okay"; ++ }; ++ }; ++}; ++ ++&clk_osc { ++ clock-frequency = <54000000>; ++}; ++ ++&clocks { ++ compatible = "brcm,bcm2838-cprman"; ++}; ++ ++&cpu_thermal { ++ coefficients = <(-487) 410040>; ++}; ++ ++&dsi0 { ++ interrupts = ; ++}; ++ ++&dsi1 { ++ interrupts = ; ++}; ++ ++&gpio { ++ gpclk0_gpio49: gpclk0_gpio49 { ++ brcm,pins = <49>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ gpclk1_gpio50: gpclk1_gpio50 { ++ brcm,pins = <50>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ gpclk2_gpio51: gpclk2_gpio51 { ++ brcm,pins = <51>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c0_gpio46: i2c0_gpio46 { ++ brcm,pins = <46 47>; ++ brcm,function = ; ++ }; ++ i2c1_gpio46: i2c1_gpio46 { ++ brcm,pins = <46 47>; ++ brcm,function = ; ++ }; ++ i2c3_gpio2: i2c3_gpio2 { ++ brcm,pins = <2 3>; ++ brcm,function = ; ++ }; ++ i2c3_gpio4: i2c3_gpio4 { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ }; ++ i2c4_gpio6: i2c4_gpio6 { ++ brcm,pins = <6 7>; ++ brcm,function = ; ++ }; ++ i2c4_gpio8: i2c4_gpio8 { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ }; ++ i2c5_gpio10: i2c5_gpio10 { ++ brcm,pins = <10 11>; ++ brcm,function = ; ++ }; ++ i2c5_gpio12: i2c5_gpio12 { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ }; ++ i2c6_gpio0: i2c6_gpio0 { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ }; ++ i2c6_gpio22: i2c6_gpio22 { ++ brcm,pins = <22 23>; ++ brcm,function = ; ++ }; ++ i2c_slave_gpio8: i2c_slave_gpio8 { ++ brcm,pins = <8 9 10 11>; ++ brcm,function = ; ++ }; ++ ++ jtag_gpio48: jtag_gpio48 { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = ; ++ }; ++ ++ mii_gpio28: mii_gpio28 { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = ; ++ }; ++ mii_gpio36: mii_gpio36 { ++ brcm,pins = <36 37 38 39>; ++ brcm,function = ; ++ }; ++ ++ pcm_gpio50: pcm_gpio50 { ++ brcm,pins = <50 51 52 53>; ++ brcm,function = ; ++ }; ++ ++ pwm0_gpio52: pwm0_gpio52 { ++ brcm,pins = <52>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ pwm1_gpio53: pwm1_gpio53 { ++ brcm,pins = <53>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ /* The following group consists of: ++ * RGMII_START_STOP ++ * RGMII_RX_OK ++ */ ++ rgmii_gpio35: rgmii_gpio35 { ++ brcm,pins = <35 36>; ++ brcm,function = ; ++ }; ++ rgmii_irq_gpio34: rgmii_irq_gpio34 { ++ brcm,pins = <34>; ++ brcm,function = ; ++ }; ++ rgmii_irq_gpio39: rgmii_irq_gpio39 { ++ brcm,pins = <39>; ++ brcm,function = ; ++ }; ++ rgmii_mdio_gpio28: rgmii_mdio_gpio28 { ++ brcm,pins = <28 29>; ++ brcm,function = ; ++ }; ++ rgmii_mdio_gpio37: rgmii_mdio_gpio37 { ++ brcm,pins = <37 38>; ++ brcm,function = ; ++ }; ++ ++ spi0_gpio46: spi0_gpio46 { ++ brcm,pins = <46 47 48 49>; ++ brcm,function = ; ++ }; ++ spi2_gpio46: spi2_gpio46 { ++ brcm,pins = <46 47 48 49 50>; ++ brcm,function = ; ++ }; ++ spi3_gpio0: spi3_gpio0 { ++ brcm,pins = <0 1 2 3>; ++ brcm,function = ; ++ }; ++ spi4_gpio4: spi4_gpio4 { ++ brcm,pins = <4 5 6 7>; ++ brcm,function = ; ++ }; ++ spi5_gpio12: spi5_gpio12 { ++ brcm,pins = <12 13 14 15>; ++ brcm,function = ; ++ }; ++ spi6_gpio18: spi6_gpio18 { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = ; ++ }; ++ ++ uart2_gpio0: uart2_gpio0 { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { ++ brcm,pins = <2 3>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ uart3_gpio4: uart3_gpio4 { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { ++ brcm,pins = <6 7>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ uart4_gpio8: uart4_gpio8 { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { ++ brcm,pins = <10 11>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ uart5_gpio12: uart5_gpio12 { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { ++ brcm,pins = <14 15>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++}; ++ ++&vec { ++ interrupts = ; ++}; ++ ++&usb { ++ interrupts = ; ++}; ++ ++&hdmi { ++ interrupts = , ++ ; ++}; ++ ++&uart1 { ++ interrupts = ; ++}; ++ ++&spi1 { ++ interrupts = ; ++}; ++ ++&spi2 { ++ interrupts = ; ++}; ++ ++&csi0 { ++ interrupts = ; ++}; ++ ++&csi1 { ++ interrupts = ; ++}; ++ ++&sdhci { ++ interrupts = ; ++}; ++ ++&i2c0 { ++ interrupts = ; ++}; ++ ++&i2c1 { ++ interrupts = ; ++}; ++ ++&i2c2 { ++ interrupts = ; ++}; ++ ++&gpio { ++ interrupts = , ++ , ++ , ++ ; ++}; ++ ++&mailbox { ++ interrupts = ; ++}; ++ ++&rng { ++ compatible = "brcm,bcm2838-rng200"; ++}; ++ ++&sdhost { ++ interrupts = ; ++}; ++ ++&uart0 { ++ interrupts = ; ++}; ++ ++&dma { ++ interrupts = , ++ , ++ , ++ , ++ , ++ , ++ , ++ , /* dmalite 7 */ ++ , /* dmalite 8 */ ++ , /* dmalite 9 */ ++ , /* dmalite 10 */ ++ /* DMA4 - 40 bit DMA engines */ ++ , /* dma4 11 */ ++ , /* dma4 12 */ ++ , /* dma4 13 */ ++ ; /* dma4 14 */ ++ interrupt-names = "dma0", ++ "dma1", ++ "dma2", ++ "dma3", ++ "dma4", ++ "dma5", ++ "dma6", ++ "dma7", ++ "dma8", ++ "dma9", ++ "dma10", ++ "dma11", ++ "dma12", ++ "dma13", ++ "dma14"; ++ brcm,dma-channel-mask = <0x7ef5>; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0585-drm-v3d-Refactor-job-management.patch b/target/linux/brcm2708/patches-4.19/950-0585-drm-v3d-Refactor-job-management.patch deleted file mode 100644 index 64be2b080d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0585-drm-v3d-Refactor-job-management.patch +++ /dev/null @@ -1,1104 +0,0 @@ -From ccf319a0265bfdb4a622a52645f159461bc88079 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 27 Dec 2018 12:11:52 -0800 -Subject: [PATCH 585/806] drm/v3d: Refactor job management. - -The CL submission had two jobs embedded in an exec struct. When I -added TFU support, I had to replicate some of the exec stuff and some -of the job stuff. As I went to add CSD, it became clear that actually -what was in exec should just be in the two CL jobs, and it would let -us share a lot more code between the 4 queues. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/v3d/v3d_drv.h | 77 ++++---- - drivers/gpu/drm/v3d/v3d_gem.c | 331 +++++++++++++++++--------------- - drivers/gpu/drm/v3d/v3d_irq.c | 8 +- - drivers/gpu/drm/v3d/v3d_sched.c | 264 ++++++++++++++----------- - 4 files changed, 373 insertions(+), 307 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_drv.h -+++ b/drivers/gpu/drm/v3d/v3d_drv.h -@@ -67,8 +67,8 @@ struct v3d_dev { - - struct work_struct overflow_mem_work; - -- struct v3d_exec_info *bin_job; -- struct v3d_exec_info *render_job; -+ struct v3d_bin_job *bin_job; -+ struct v3d_render_job *render_job; - struct v3d_tfu_job *tfu_job; - - struct v3d_queue_state queue[V3D_MAX_QUEUES]; -@@ -132,7 +132,7 @@ struct v3d_bo { - struct list_head vmas; /* list of v3d_vma */ - - /* List entry for the BO's position in -- * v3d_exec_info->unref_list -+ * v3d_render_job->unref_list - */ - struct list_head unref_head; - -@@ -176,7 +176,15 @@ to_v3d_fence(struct dma_fence *fence) - struct v3d_job { - struct drm_sched_job base; - -- struct v3d_exec_info *exec; -+ struct kref refcount; -+ -+ struct v3d_dev *v3d; -+ -+ /* This is the array of BOs that were looked up at the start -+ * of submission. -+ */ -+ struct v3d_bo **bo; -+ u32 bo_count; - - /* An optional fence userspace can pass in for the job to depend on. */ - struct dma_fence *in_fence; -@@ -184,59 +192,53 @@ struct v3d_job { - /* v3d fence to be signaled by IRQ handler when the job is complete. */ - struct dma_fence *irq_fence; - -+ /* scheduler fence for when the job is considered complete and -+ * the BO reservations can be released. -+ */ -+ struct dma_fence *done_fence; -+ -+ /* Callback for the freeing of the job on refcount going to 0. */ -+ void (*free)(struct kref *ref); -+}; -+ -+struct v3d_bin_job { -+ struct v3d_job base; -+ - /* GPU virtual addresses of the start/end of the CL job. */ - u32 start, end; - - u32 timedout_ctca, timedout_ctra; --}; - --struct v3d_exec_info { -- struct v3d_dev *v3d; -+ /* Corresponding render job, for attaching our overflow memory. */ -+ struct v3d_render_job *render; -+ -+ /* Submitted tile memory allocation start/size, tile state. */ -+ u32 qma, qms, qts; -+}; - -- struct v3d_job bin, render; -+struct v3d_render_job { -+ struct v3d_job base; - -- /* Fence for when the scheduler considers the binner to be -- * done, for render to depend on. -+ /* Optional fence for the binner, to depend on before starting -+ * our job. - */ - struct dma_fence *bin_done_fence; - -- /* Fence for when the scheduler considers the render to be -- * done, for when the BOs reservations should be complete. -- */ -- struct dma_fence *render_done_fence; -- -- struct kref refcount; -+ /* GPU virtual addresses of the start/end of the CL job. */ -+ u32 start, end; - -- /* This is the array of BOs that were looked up at the start of exec. */ -- struct v3d_bo **bo; -- u32 bo_count; -+ u32 timedout_ctca, timedout_ctra; - - /* List of overflow BOs used in the job that need to be - * released once the job is complete. - */ - struct list_head unref_list; -- -- /* Submitted tile memory allocation start/size, tile state. */ -- u32 qma, qms, qts; - }; - - struct v3d_tfu_job { -- struct drm_sched_job base; -+ struct v3d_job base; - - struct drm_v3d_submit_tfu args; -- -- /* An optional fence userspace can pass in for the job to depend on. */ -- struct dma_fence *in_fence; -- -- /* v3d fence to be signaled by IRQ handler when the job is complete. */ -- struct dma_fence *irq_fence; -- -- struct v3d_dev *v3d; -- -- struct kref refcount; -- -- /* This is the array of BOs that were looked up at the start of exec. */ -- struct v3d_bo *bo[4]; - }; - - /** -@@ -306,8 +308,7 @@ int v3d_submit_tfu_ioctl(struct drm_devi - struct drm_file *file_priv); - int v3d_wait_bo_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); --void v3d_exec_put(struct v3d_exec_info *exec); --void v3d_tfu_job_put(struct v3d_tfu_job *exec); -+void v3d_job_put(struct v3d_job *job); - void v3d_reset(struct v3d_dev *v3d); - void v3d_invalidate_caches(struct v3d_dev *v3d); - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -293,11 +293,11 @@ retry: - } - - /** -- * v3d_cl_lookup_bos() - Sets up exec->bo[] with the GEM objects -+ * v3d_lookup_bos() - Sets up job->bo[] with the GEM objects - * referenced by the job. - * @dev: DRM device - * @file_priv: DRM file for this fd -- * @exec: V3D job being set up -+ * @job: V3D job being set up - * - * The command validator needs to reference BOs by their index within - * the submitted job's BO list. This does the validation of the job's -@@ -307,18 +307,19 @@ retry: - * failure, because that will happen at v3d_exec_cleanup() time. - */ - static int --v3d_cl_lookup_bos(struct drm_device *dev, -- struct drm_file *file_priv, -- struct drm_v3d_submit_cl *args, -- struct v3d_exec_info *exec) -+v3d_lookup_bos(struct drm_device *dev, -+ struct drm_file *file_priv, -+ struct v3d_job *job, -+ u64 bo_handles, -+ u32 bo_count) - { - u32 *handles; - int ret = 0; - int i; - -- exec->bo_count = args->bo_handle_count; -+ job->bo_count = bo_count; - -- if (!exec->bo_count) { -+ if (!job->bo_count) { - /* See comment on bo_index for why we have to check - * this. - */ -@@ -326,15 +327,15 @@ v3d_cl_lookup_bos(struct drm_device *dev - return -EINVAL; - } - -- exec->bo = kvmalloc_array(exec->bo_count, -- sizeof(struct drm_gem_cma_object *), -- GFP_KERNEL | __GFP_ZERO); -- if (!exec->bo) { -+ job->bo = kvmalloc_array(job->bo_count, -+ sizeof(struct drm_gem_cma_object *), -+ GFP_KERNEL | __GFP_ZERO); -+ if (!job->bo) { - DRM_DEBUG("Failed to allocate validated BO pointers\n"); - return -ENOMEM; - } - -- handles = kvmalloc_array(exec->bo_count, sizeof(u32), GFP_KERNEL); -+ handles = kvmalloc_array(job->bo_count, sizeof(u32), GFP_KERNEL); - if (!handles) { - ret = -ENOMEM; - DRM_DEBUG("Failed to allocate incoming GEM handles\n"); -@@ -342,15 +343,15 @@ v3d_cl_lookup_bos(struct drm_device *dev - } - - if (copy_from_user(handles, -- (void __user *)(uintptr_t)args->bo_handles, -- exec->bo_count * sizeof(u32))) { -+ (void __user *)(uintptr_t)bo_handles, -+ job->bo_count * sizeof(u32))) { - ret = -EFAULT; - DRM_DEBUG("Failed to copy in GEM handles\n"); - goto fail; - } - - spin_lock(&file_priv->table_lock); -- for (i = 0; i < exec->bo_count; i++) { -+ for (i = 0; i < job->bo_count; i++) { - struct drm_gem_object *bo = idr_find(&file_priv->object_idr, - handles[i]); - if (!bo) { -@@ -361,7 +362,7 @@ v3d_cl_lookup_bos(struct drm_device *dev - goto fail; - } - drm_gem_object_get(bo); -- exec->bo[i] = to_v3d_bo(bo); -+ job->bo[i] = to_v3d_bo(bo); - } - spin_unlock(&file_priv->table_lock); - -@@ -371,59 +372,41 @@ fail: - } - - static void --v3d_exec_cleanup(struct kref *ref) -+v3d_job_free(struct kref *ref) - { -- struct v3d_exec_info *exec = container_of(ref, struct v3d_exec_info, -- refcount); -- unsigned int i; -- struct v3d_bo *bo, *save; -- -- dma_fence_put(exec->bin.in_fence); -- dma_fence_put(exec->render.in_fence); -- -- dma_fence_put(exec->bin.irq_fence); -- dma_fence_put(exec->render.irq_fence); -- -- dma_fence_put(exec->bin_done_fence); -- dma_fence_put(exec->render_done_fence); -- -- for (i = 0; i < exec->bo_count; i++) -- drm_gem_object_put_unlocked(&exec->bo[i]->base); -- kvfree(exec->bo); -+ struct v3d_job *job = container_of(ref, struct v3d_job, refcount); -+ int i; - -- list_for_each_entry_safe(bo, save, &exec->unref_list, unref_head) { -- drm_gem_object_put_unlocked(&bo->base); -+ for (i = 0; i < job->bo_count; i++) { -+ if (job->bo[i]) -+ drm_gem_object_put_unlocked(&job->bo[i]->base); - } -+ kvfree(job->bo); - -- kfree(exec); --} -+ dma_fence_put(job->in_fence); -+ dma_fence_put(job->irq_fence); -+ dma_fence_put(job->done_fence); - --void v3d_exec_put(struct v3d_exec_info *exec) --{ -- kref_put(&exec->refcount, v3d_exec_cleanup); -+ kfree(job); - } - - static void --v3d_tfu_job_cleanup(struct kref *ref) -+v3d_render_job_free(struct kref *ref) - { -- struct v3d_tfu_job *job = container_of(ref, struct v3d_tfu_job, -- refcount); -- unsigned int i; -- -- dma_fence_put(job->in_fence); -- dma_fence_put(job->irq_fence); -+ struct v3d_render_job *job = container_of(ref, struct v3d_render_job, -+ base.refcount); -+ struct v3d_bo *bo, *save; - -- for (i = 0; i < ARRAY_SIZE(job->bo); i++) { -- if (job->bo[i]) -- drm_gem_object_put_unlocked(&job->bo[i]->base); -+ list_for_each_entry_safe(bo, save, &job->unref_list, unref_head) { -+ drm_gem_object_put_unlocked(&bo->base); - } - -- kfree(job); -+ v3d_job_free(ref); - } - --void v3d_tfu_job_put(struct v3d_tfu_job *job) -+void v3d_job_put(struct v3d_job *job) - { -- kref_put(&job->refcount, v3d_tfu_job_cleanup); -+ kref_put(&job->refcount, job->free); - } - - int -@@ -476,6 +459,65 @@ v3d_wait_bo_ioctl(struct drm_device *dev - return ret; - } - -+static int -+v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv, -+ struct v3d_job *job, void (*free)(struct kref *ref), -+ u32 in_sync) -+{ -+ int ret; -+ -+ job->v3d = v3d; -+ job->free = free; -+ -+ ret = drm_syncobj_find_fence(file_priv, in_sync, 0, &job->in_fence); -+ if (ret == -EINVAL) -+ return ret; -+ -+ kref_init(&job->refcount); -+ -+ return 0; -+} -+ -+static int -+v3d_push_job(struct v3d_file_priv *v3d_priv, -+ struct v3d_job *job, enum v3d_queue queue) -+{ -+ int ret; -+ -+ ret = drm_sched_job_init(&job->base, &v3d_priv->sched_entity[queue], -+ v3d_priv); -+ if (ret) -+ return ret; -+ -+ job->done_fence = dma_fence_get(&job->base.s_fence->finished); -+ -+ /* put by scheduler job completion */ -+ kref_get(&job->refcount); -+ -+ drm_sched_entity_push_job(&job->base, &v3d_priv->sched_entity[queue]); -+ -+ return 0; -+} -+ -+static void -+v3d_attach_fences_and_unlock_reservation(struct drm_file *file_priv, -+ struct v3d_job *job, -+ struct ww_acquire_ctx *acquire_ctx, -+ u32 out_sync) -+{ -+ struct drm_syncobj *sync_out; -+ -+ v3d_attach_object_fences(job->bo, job->bo_count, job->done_fence); -+ v3d_unlock_bo_reservations(job->bo, job->bo_count, acquire_ctx); -+ -+ /* Update the return sync object for the job */ -+ sync_out = drm_syncobj_find(file_priv, out_sync); -+ if (sync_out) { -+ drm_syncobj_replace_fence(sync_out, job->done_fence); -+ drm_syncobj_put(sync_out); -+ } -+} -+ - /** - * v3d_submit_cl_ioctl() - Submits a job (frame) to the V3D. - * @dev: DRM device -@@ -495,9 +537,9 @@ v3d_submit_cl_ioctl(struct drm_device *d - struct v3d_dev *v3d = to_v3d_dev(dev); - struct v3d_file_priv *v3d_priv = file_priv->driver_priv; - struct drm_v3d_submit_cl *args = data; -- struct v3d_exec_info *exec; -+ struct v3d_bin_job *bin = NULL; -+ struct v3d_render_job *render; - struct ww_acquire_ctx acquire_ctx; -- struct drm_syncobj *sync_out; - int ret = 0; - - trace_v3d_submit_cl_ioctl(&v3d->drm, args->rcl_start, args->rcl_end); -@@ -507,95 +549,84 @@ v3d_submit_cl_ioctl(struct drm_device *d - return -EINVAL; - } - -- exec = kcalloc(1, sizeof(*exec), GFP_KERNEL); -- if (!exec) -+ render = kcalloc(1, sizeof(*render), GFP_KERNEL); -+ if (!render) - return -ENOMEM; - -- kref_init(&exec->refcount); -+ render->start = args->rcl_start; -+ render->end = args->rcl_end; -+ INIT_LIST_HEAD(&render->unref_list); - -- ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl, -- 0, &exec->bin.in_fence); -- if (ret == -EINVAL) -- goto fail; -+ ret = v3d_job_init(v3d, file_priv, &render->base, -+ v3d_render_job_free, args->in_sync_rcl); -+ if (ret) { -+ kfree(bin); -+ kfree(render); -+ return ret; -+ } - -- ret = drm_syncobj_find_fence(file_priv, args->in_sync_rcl, -- 0, &exec->render.in_fence); -- if (ret == -EINVAL) -- goto fail; -+ if (args->bcl_start != args->bcl_end) { -+ bin = kcalloc(1, sizeof(*bin), GFP_KERNEL); -+ if (!bin) -+ return -ENOMEM; -+ -+ ret = v3d_job_init(v3d, file_priv, &bin->base, -+ v3d_job_free, args->in_sync_bcl); -+ if (ret) { -+ v3d_job_put(&render->base); -+ return ret; -+ } - -- exec->qma = args->qma; -- exec->qms = args->qms; -- exec->qts = args->qts; -- exec->bin.exec = exec; -- exec->bin.start = args->bcl_start; -- exec->bin.end = args->bcl_end; -- exec->render.exec = exec; -- exec->render.start = args->rcl_start; -- exec->render.end = args->rcl_end; -- exec->v3d = v3d; -- INIT_LIST_HEAD(&exec->unref_list); -+ bin->start = args->bcl_start; -+ bin->end = args->bcl_end; -+ bin->qma = args->qma; -+ bin->qms = args->qms; -+ bin->qts = args->qts; -+ bin->render = render; -+ } - -- ret = v3d_cl_lookup_bos(dev, file_priv, args, exec); -+ ret = v3d_lookup_bos(dev, file_priv, &render->base, -+ args->bo_handles, args->bo_handle_count); - if (ret) - goto fail; - -- ret = v3d_lock_bo_reservations(exec->bo, exec->bo_count, -+ ret = v3d_lock_bo_reservations(render->base.bo, render->base.bo_count, - &acquire_ctx); - if (ret) - goto fail; - - mutex_lock(&v3d->sched_lock); -- if (exec->bin.start != exec->bin.end) { -- ret = drm_sched_job_init(&exec->bin.base, -- &v3d_priv->sched_entity[V3D_BIN], -- v3d_priv); -+ if (bin) { -+ ret = v3d_push_job(v3d_priv, &bin->base, V3D_BIN); - if (ret) - goto fail_unreserve; - -- exec->bin_done_fence = -- dma_fence_get(&exec->bin.base.s_fence->finished); -- -- kref_get(&exec->refcount); /* put by scheduler job completion */ -- drm_sched_entity_push_job(&exec->bin.base, -- &v3d_priv->sched_entity[V3D_BIN]); -+ render->bin_done_fence = dma_fence_get(bin->base.done_fence); - } - -- ret = drm_sched_job_init(&exec->render.base, -- &v3d_priv->sched_entity[V3D_RENDER], -- v3d_priv); -+ ret = v3d_push_job(v3d_priv, &render->base, V3D_RENDER); - if (ret) - goto fail_unreserve; -- -- exec->render_done_fence = -- dma_fence_get(&exec->render.base.s_fence->finished); -- -- kref_get(&exec->refcount); /* put by scheduler job completion */ -- drm_sched_entity_push_job(&exec->render.base, -- &v3d_priv->sched_entity[V3D_RENDER]); - mutex_unlock(&v3d->sched_lock); - -- v3d_attach_object_fences(exec->bo, exec->bo_count, -- exec->render_done_fence); -- -- v3d_unlock_bo_reservations(exec->bo, exec->bo_count, &acquire_ctx); -- -- /* Update the return sync object for the */ -- sync_out = drm_syncobj_find(file_priv, args->out_sync); -- if (sync_out) { -- drm_syncobj_replace_fence(sync_out, -- exec->render_done_fence); -- drm_syncobj_put(sync_out); -- } -- -- v3d_exec_put(exec); -+ v3d_attach_fences_and_unlock_reservation(file_priv, -+ &render->base, &acquire_ctx, -+ args->out_sync); -+ -+ if (bin) -+ v3d_job_put(&bin->base); -+ v3d_job_put(&render->base); - - return 0; - - fail_unreserve: - mutex_unlock(&v3d->sched_lock); -- v3d_unlock_bo_reservations(exec->bo, exec->bo_count, &acquire_ctx); -+ v3d_unlock_bo_reservations(render->base.bo, -+ render->base.bo_count, &acquire_ctx); - fail: -- v3d_exec_put(exec); -+ if (bin) -+ v3d_job_put(&bin->base); -+ v3d_job_put(&render->base); - - return ret; - } -@@ -618,10 +649,7 @@ v3d_submit_tfu_ioctl(struct drm_device * - struct drm_v3d_submit_tfu *args = data; - struct v3d_tfu_job *job; - struct ww_acquire_ctx acquire_ctx; -- struct drm_syncobj *sync_out; -- struct dma_fence *sched_done_fence; - int ret = 0; -- int bo_count; - - trace_v3d_submit_tfu_ioctl(&v3d->drm, args->iia); - -@@ -629,75 +657,66 @@ v3d_submit_tfu_ioctl(struct drm_device * - if (!job) - return -ENOMEM; - -- kref_init(&job->refcount); -- -- ret = drm_syncobj_find_fence(file_priv, args->in_sync, -- 0, &job->in_fence); -- if (ret == -EINVAL) -- goto fail; -+ ret = v3d_job_init(v3d, file_priv, &job->base, -+ v3d_job_free, args->in_sync); -+ if (ret) { -+ kfree(job); -+ return ret; -+ } - -+ job->base.bo = kcalloc(ARRAY_SIZE(args->bo_handles), -+ sizeof(*job->base.bo), GFP_KERNEL); - job->args = *args; -- job->v3d = v3d; - - spin_lock(&file_priv->table_lock); -- for (bo_count = 0; bo_count < ARRAY_SIZE(job->bo); bo_count++) { -+ for (job->base.bo_count = 0; -+ job->base.bo_count < ARRAY_SIZE(args->bo_handles); -+ job->base.bo_count++) { - struct drm_gem_object *bo; - -- if (!args->bo_handles[bo_count]) -+ if (!args->bo_handles[job->base.bo_count]) - break; - - bo = idr_find(&file_priv->object_idr, -- args->bo_handles[bo_count]); -+ args->bo_handles[job->base.bo_count]); - if (!bo) { - DRM_DEBUG("Failed to look up GEM BO %d: %d\n", -- bo_count, args->bo_handles[bo_count]); -+ job->base.bo_count, -+ args->bo_handles[job->base.bo_count]); - ret = -ENOENT; - spin_unlock(&file_priv->table_lock); - goto fail; - } - drm_gem_object_get(bo); -- job->bo[bo_count] = to_v3d_bo(bo); -+ job->base.bo[job->base.bo_count] = to_v3d_bo(bo); - } - spin_unlock(&file_priv->table_lock); - -- ret = v3d_lock_bo_reservations(job->bo, bo_count, &acquire_ctx); -+ ret = v3d_lock_bo_reservations(job->base.bo, job->base.bo_count, -+ &acquire_ctx); - if (ret) - goto fail; - - mutex_lock(&v3d->sched_lock); -- ret = drm_sched_job_init(&job->base, -- &v3d_priv->sched_entity[V3D_TFU], -- v3d_priv); -+ ret = v3d_push_job(v3d_priv, &job->base, V3D_TFU); - if (ret) - goto fail_unreserve; -- -- sched_done_fence = dma_fence_get(&job->base.s_fence->finished); -- -- kref_get(&job->refcount); /* put by scheduler job completion */ -- drm_sched_entity_push_job(&job->base, &v3d_priv->sched_entity[V3D_TFU]); - mutex_unlock(&v3d->sched_lock); - -- v3d_attach_object_fences(job->bo, bo_count, sched_done_fence); -- -- v3d_unlock_bo_reservations(job->bo, bo_count, &acquire_ctx); -- -- /* Update the return sync object */ -- sync_out = drm_syncobj_find(file_priv, args->out_sync); -- if (sync_out) { -- drm_syncobj_replace_fence(sync_out, sched_done_fence); -- drm_syncobj_put(sync_out); -- } -- dma_fence_put(sched_done_fence); -+ v3d_attach_fences_and_unlock_reservation(file_priv, -+ &job->base, &acquire_ctx, -+ args->out_sync); - -- v3d_tfu_job_put(job); -+ v3d_job_put(&job->base); - - return 0; - - fail_unreserve: - mutex_unlock(&v3d->sched_lock); -- v3d_unlock_bo_reservations(job->bo, bo_count, &acquire_ctx); -+ v3d_unlock_bo_reservations(job->base.bo, job->base.bo_count, -+ &acquire_ctx); - fail: -- v3d_tfu_job_put(job); -+ v3d_job_put(&job->base); - - return ret; - } -@@ -755,7 +774,7 @@ v3d_gem_destroy(struct drm_device *dev) - - v3d_sched_fini(v3d); - -- /* Waiting for exec to finish would need to be done before -+ /* Waiting for jobs to finish would need to be done before - * unregistering V3D. - */ - WARN_ON(v3d->bin_job); ---- a/drivers/gpu/drm/v3d/v3d_irq.c -+++ b/drivers/gpu/drm/v3d/v3d_irq.c -@@ -60,7 +60,7 @@ v3d_overflow_mem_work(struct work_struct - } - - drm_gem_object_get(&bo->base); -- list_add_tail(&bo->unref_head, &v3d->bin_job->unref_list); -+ list_add_tail(&bo->unref_head, &v3d->bin_job->render->unref_list); - spin_unlock_irqrestore(&v3d->job_lock, irqflags); - - V3D_CORE_WRITE(0, V3D_PTB_BPOA, bo->node.start << PAGE_SHIFT); -@@ -93,7 +93,7 @@ v3d_irq(int irq, void *arg) - - if (intsts & V3D_INT_FLDONE) { - struct v3d_fence *fence = -- to_v3d_fence(v3d->bin_job->bin.irq_fence); -+ to_v3d_fence(v3d->bin_job->base.irq_fence); - - trace_v3d_bcl_irq(&v3d->drm, fence->seqno); - dma_fence_signal(&fence->base); -@@ -102,7 +102,7 @@ v3d_irq(int irq, void *arg) - - if (intsts & V3D_INT_FRDONE) { - struct v3d_fence *fence = -- to_v3d_fence(v3d->render_job->render.irq_fence); -+ to_v3d_fence(v3d->render_job->base.irq_fence); - - trace_v3d_rcl_irq(&v3d->drm, fence->seqno); - dma_fence_signal(&fence->base); -@@ -138,7 +138,7 @@ v3d_hub_irq(int irq, void *arg) - - if (intsts & V3D_HUB_INT_TFUC) { - struct v3d_fence *fence = -- to_v3d_fence(v3d->tfu_job->irq_fence); -+ to_v3d_fence(v3d->tfu_job->base.irq_fence); - - trace_v3d_tfu_irq(&v3d->drm, fence->seqno); - dma_fence_signal(&fence->base); ---- a/drivers/gpu/drm/v3d/v3d_sched.c -+++ b/drivers/gpu/drm/v3d/v3d_sched.c -@@ -30,39 +30,43 @@ to_v3d_job(struct drm_sched_job *sched_j - return container_of(sched_job, struct v3d_job, base); - } - --static struct v3d_tfu_job * --to_tfu_job(struct drm_sched_job *sched_job) -+static struct v3d_bin_job * -+to_bin_job(struct drm_sched_job *sched_job) - { -- return container_of(sched_job, struct v3d_tfu_job, base); -+ return container_of(sched_job, struct v3d_bin_job, base.base); - } - --static void --v3d_job_free(struct drm_sched_job *sched_job) -+static struct v3d_render_job * -+to_render_job(struct drm_sched_job *sched_job) - { -- struct v3d_job *job = to_v3d_job(sched_job); -+ return container_of(sched_job, struct v3d_render_job, base.base); -+} - -- v3d_exec_put(job->exec); -+static struct v3d_tfu_job * -+to_tfu_job(struct drm_sched_job *sched_job) -+{ -+ return container_of(sched_job, struct v3d_tfu_job, base.base); - } - - static void --v3d_tfu_job_free(struct drm_sched_job *sched_job) -+v3d_job_free(struct drm_sched_job *sched_job) - { -- struct v3d_tfu_job *job = to_tfu_job(sched_job); -+ struct v3d_job *job = to_v3d_job(sched_job); - -- v3d_tfu_job_put(job); -+ v3d_job_put(job); - } - - /** -- * Returns the fences that the bin or render job depends on, one by one. -- * v3d_job_run() won't be called until all of them have been signaled. -+ * Returns the fences that the job depends on, one by one. -+ * -+ * If placed in the scheduler's .dependency method, the corresponding -+ * .run_job won't be called until all of them have been signaled. - */ - static struct dma_fence * - v3d_job_dependency(struct drm_sched_job *sched_job, - struct drm_sched_entity *s_entity) - { - struct v3d_job *job = to_v3d_job(sched_job); -- struct v3d_exec_info *exec = job->exec; -- enum v3d_queue q = job == &exec->bin ? V3D_BIN : V3D_RENDER; - struct dma_fence *fence; - - fence = job->in_fence; -@@ -71,113 +75,132 @@ v3d_job_dependency(struct drm_sched_job - return fence; - } - -- if (q == V3D_RENDER) { -- /* If we had a bin job, the render job definitely depends on -- * it. We first have to wait for bin to be scheduled, so that -- * its done_fence is created. -- */ -- fence = exec->bin_done_fence; -- if (fence) { -- exec->bin_done_fence = NULL; -- return fence; -- } -- } -- -- /* XXX: Wait on a fence for switching the GMP if necessary, -- * and then do so. -- */ -- -- return fence; -+ return NULL; - } - - /** -- * Returns the fences that the TFU job depends on, one by one. -- * v3d_tfu_job_run() won't be called until all of them have been -- * signaled. -+ * Returns the fences that the render job depends on, one by one. -+ * v3d_job_run() won't be called until all of them have been signaled. - */ - static struct dma_fence * --v3d_tfu_job_dependency(struct drm_sched_job *sched_job, -- struct drm_sched_entity *s_entity) -+v3d_render_job_dependency(struct drm_sched_job *sched_job, -+ struct drm_sched_entity *s_entity) - { -- struct v3d_tfu_job *job = to_tfu_job(sched_job); -+ struct v3d_render_job *job = to_render_job(sched_job); - struct dma_fence *fence; - -- fence = job->in_fence; -+ fence = v3d_job_dependency(sched_job, s_entity); -+ if (fence) -+ return fence; -+ -+ /* If we had a bin job, the render job definitely depends on -+ * it. We first have to wait for bin to be scheduled, so that -+ * its done_fence is created. -+ */ -+ fence = job->bin_done_fence; - if (fence) { -- job->in_fence = NULL; -+ job->bin_done_fence = NULL; - return fence; - } - -- return NULL; -+ /* XXX: Wait on a fence for switching the GMP if necessary, -+ * and then do so. -+ */ -+ -+ return fence; - } - --static struct dma_fence *v3d_job_run(struct drm_sched_job *sched_job) -+static struct dma_fence *v3d_bin_job_run(struct drm_sched_job *sched_job) - { -- struct v3d_job *job = to_v3d_job(sched_job); -- struct v3d_exec_info *exec = job->exec; -- enum v3d_queue q = job == &exec->bin ? V3D_BIN : V3D_RENDER; -- struct v3d_dev *v3d = exec->v3d; -+ struct v3d_bin_job *job = to_bin_job(sched_job); -+ struct v3d_dev *v3d = job->base.v3d; - struct drm_device *dev = &v3d->drm; - struct dma_fence *fence; - unsigned long irqflags; - -- if (unlikely(job->base.s_fence->finished.error)) -+ if (unlikely(job->base.base.s_fence->finished.error)) - return NULL; - - /* Lock required around bin_job update vs - * v3d_overflow_mem_work(). - */ - spin_lock_irqsave(&v3d->job_lock, irqflags); -- if (q == V3D_BIN) { -- v3d->bin_job = job->exec; -+ v3d->bin_job = job; -+ /* Clear out the overflow allocation, so we don't -+ * reuse the overflow attached to a previous job. -+ */ -+ V3D_CORE_WRITE(0, V3D_PTB_BPOS, 0); -+ spin_unlock_irqrestore(&v3d->job_lock, irqflags); -+ -+ v3d_invalidate_caches(v3d); - -- /* Clear out the overflow allocation, so we don't -- * reuse the overflow attached to a previous job. -- */ -- V3D_CORE_WRITE(0, V3D_PTB_BPOS, 0); -- } else { -- v3d->render_job = job->exec; -+ fence = v3d_fence_create(v3d, V3D_BIN); -+ if (IS_ERR(fence)) -+ return NULL; -+ -+ if (job->base.irq_fence) -+ dma_fence_put(job->base.irq_fence); -+ job->base.irq_fence = dma_fence_get(fence); -+ -+ trace_v3d_submit_cl(dev, false, to_v3d_fence(fence)->seqno, -+ job->start, job->end); -+ -+ /* Set the current and end address of the control list. -+ * Writing the end register is what starts the job. -+ */ -+ if (job->qma) { -+ V3D_CORE_WRITE(0, V3D_CLE_CT0QMA, job->qma); -+ V3D_CORE_WRITE(0, V3D_CLE_CT0QMS, job->qms); - } -- spin_unlock_irqrestore(&v3d->job_lock, irqflags); -+ if (job->qts) { -+ V3D_CORE_WRITE(0, V3D_CLE_CT0QTS, -+ V3D_CLE_CT0QTS_ENABLE | -+ job->qts); -+ } -+ V3D_CORE_WRITE(0, V3D_CLE_CT0QBA, job->start); -+ V3D_CORE_WRITE(0, V3D_CLE_CT0QEA, job->end); -+ -+ return fence; -+} -+ -+static struct dma_fence *v3d_render_job_run(struct drm_sched_job *sched_job) -+{ -+ struct v3d_render_job *job = to_render_job(sched_job); -+ struct v3d_dev *v3d = job->base.v3d; -+ struct drm_device *dev = &v3d->drm; -+ struct dma_fence *fence; -+ -+ if (unlikely(job->base.base.s_fence->finished.error)) -+ return NULL; - -- /* Can we avoid this flush when q==RENDER? We need to be -- * careful of scheduling, though -- imagine job0 rendering to -- * texture and job1 reading, and them being executed as bin0, -- * bin1, render0, render1, so that render1's flush at bin time -+ v3d->render_job = job; -+ -+ /* Can we avoid this flush? We need to be careful of -+ * scheduling, though -- imagine job0 rendering to texture and -+ * job1 reading, and them being executed as bin0, bin1, -+ * render0, render1, so that render1's flush at bin time - * wasn't enough. - */ - v3d_invalidate_caches(v3d); - -- fence = v3d_fence_create(v3d, q); -+ fence = v3d_fence_create(v3d, V3D_RENDER); - if (IS_ERR(fence)) - return NULL; - -- if (job->irq_fence) -- dma_fence_put(job->irq_fence); -- job->irq_fence = dma_fence_get(fence); -+ if (job->base.irq_fence) -+ dma_fence_put(job->base.irq_fence); -+ job->base.irq_fence = dma_fence_get(fence); - -- trace_v3d_submit_cl(dev, q == V3D_RENDER, to_v3d_fence(fence)->seqno, -+ trace_v3d_submit_cl(dev, true, to_v3d_fence(fence)->seqno, - job->start, job->end); - -- if (q == V3D_BIN) { -- if (exec->qma) { -- V3D_CORE_WRITE(0, V3D_CLE_CT0QMA, exec->qma); -- V3D_CORE_WRITE(0, V3D_CLE_CT0QMS, exec->qms); -- } -- if (exec->qts) { -- V3D_CORE_WRITE(0, V3D_CLE_CT0QTS, -- V3D_CLE_CT0QTS_ENABLE | -- exec->qts); -- } -- } else { -- /* XXX: Set the QCFG */ -- } -+ /* XXX: Set the QCFG */ - - /* Set the current and end address of the control list. - * Writing the end register is what starts the job. - */ -- V3D_CORE_WRITE(0, V3D_CLE_CTNQBA(q), job->start); -- V3D_CORE_WRITE(0, V3D_CLE_CTNQEA(q), job->end); -+ V3D_CORE_WRITE(0, V3D_CLE_CT1QBA, job->start); -+ V3D_CORE_WRITE(0, V3D_CLE_CT1QEA, job->end); - - return fence; - } -@@ -186,7 +209,7 @@ static struct dma_fence * - v3d_tfu_job_run(struct drm_sched_job *sched_job) - { - struct v3d_tfu_job *job = to_tfu_job(sched_job); -- struct v3d_dev *v3d = job->v3d; -+ struct v3d_dev *v3d = job->base.v3d; - struct drm_device *dev = &v3d->drm; - struct dma_fence *fence; - -@@ -195,9 +218,9 @@ v3d_tfu_job_run(struct drm_sched_job *sc - return NULL; - - v3d->tfu_job = job; -- if (job->irq_fence) -- dma_fence_put(job->irq_fence); -- job->irq_fence = dma_fence_get(fence); -+ if (job->base.irq_fence) -+ dma_fence_put(job->base.irq_fence); -+ job->base.irq_fence = dma_fence_get(fence); - - trace_v3d_submit_tfu(dev, to_v3d_fence(fence)->seqno); - -@@ -247,25 +270,23 @@ v3d_gpu_reset_for_timeout(struct v3d_dev - mutex_unlock(&v3d->reset_lock); - } - -+/* If the current address or return address have changed, then the GPU -+ * has probably made progress and we should delay the reset. This -+ * could fail if the GPU got in an infinite loop in the CL, but that -+ * is pretty unlikely outside of an i-g-t testcase. -+ */ - static void --v3d_job_timedout(struct drm_sched_job *sched_job) -+v3d_cl_job_timedout(struct drm_sched_job *sched_job, enum v3d_queue q, -+ u32 *timedout_ctca, u32 *timedout_ctra) - { - struct v3d_job *job = to_v3d_job(sched_job); -- struct v3d_exec_info *exec = job->exec; -- struct v3d_dev *v3d = exec->v3d; -- enum v3d_queue job_q = job == &exec->bin ? V3D_BIN : V3D_RENDER; -- u32 ctca = V3D_CORE_READ(0, V3D_CLE_CTNCA(job_q)); -- u32 ctra = V3D_CORE_READ(0, V3D_CLE_CTNRA(job_q)); -- -- /* If the current address or return address have changed, then -- * the GPU has probably made progress and we should delay the -- * reset. This could fail if the GPU got in an infinite loop -- * in the CL, but that is pretty unlikely outside of an i-g-t -- * testcase. -- */ -- if (job->timedout_ctca != ctca || job->timedout_ctra != ctra) { -- job->timedout_ctca = ctca; -- job->timedout_ctra = ctra; -+ struct v3d_dev *v3d = job->v3d; -+ u32 ctca = V3D_CORE_READ(0, V3D_CLE_CTNCA(q)); -+ u32 ctra = V3D_CORE_READ(0, V3D_CLE_CTNRA(q)); -+ -+ if (*timedout_ctca != ctca || *timedout_ctra != ctra) { -+ *timedout_ctca = ctca; -+ *timedout_ctra = ctra; - schedule_delayed_work(&job->base.work_tdr, - job->base.sched->timeout); - return; -@@ -275,25 +296,50 @@ v3d_job_timedout(struct drm_sched_job *s - } - - static void -+v3d_bin_job_timedout(struct drm_sched_job *sched_job) -+{ -+ struct v3d_bin_job *job = to_bin_job(sched_job); -+ -+ v3d_cl_job_timedout(sched_job, V3D_BIN, -+ &job->timedout_ctca, &job->timedout_ctra); -+} -+ -+static void -+v3d_render_job_timedout(struct drm_sched_job *sched_job) -+{ -+ struct v3d_render_job *job = to_render_job(sched_job); -+ -+ v3d_cl_job_timedout(sched_job, V3D_RENDER, -+ &job->timedout_ctca, &job->timedout_ctra); -+} -+ -+static void - v3d_tfu_job_timedout(struct drm_sched_job *sched_job) - { -- struct v3d_tfu_job *job = to_tfu_job(sched_job); -+ struct v3d_job *job = to_v3d_job(sched_job); - - v3d_gpu_reset_for_timeout(job->v3d, sched_job); - } - --static const struct drm_sched_backend_ops v3d_sched_ops = { -+static const struct drm_sched_backend_ops v3d_bin_sched_ops = { - .dependency = v3d_job_dependency, -- .run_job = v3d_job_run, -- .timedout_job = v3d_job_timedout, -- .free_job = v3d_job_free -+ .run_job = v3d_bin_job_run, -+ .timedout_job = v3d_bin_job_timedout, -+ .free_job = v3d_job_free, -+}; -+ -+static const struct drm_sched_backend_ops v3d_render_sched_ops = { -+ .dependency = v3d_render_job_dependency, -+ .run_job = v3d_render_job_run, -+ .timedout_job = v3d_render_job_timedout, -+ .free_job = v3d_job_free, - }; - - static const struct drm_sched_backend_ops v3d_tfu_sched_ops = { -- .dependency = v3d_tfu_job_dependency, -+ .dependency = v3d_job_dependency, - .run_job = v3d_tfu_job_run, - .timedout_job = v3d_tfu_job_timedout, -- .free_job = v3d_tfu_job_free -+ .free_job = v3d_job_free, - }; - - int -@@ -305,7 +351,7 @@ v3d_sched_init(struct v3d_dev *v3d) - int ret; - - ret = drm_sched_init(&v3d->queue[V3D_BIN].sched, -- &v3d_sched_ops, -+ &v3d_bin_sched_ops, - hw_jobs_limit, job_hang_limit, - msecs_to_jiffies(hang_limit_ms), - "v3d_bin"); -@@ -315,7 +361,7 @@ v3d_sched_init(struct v3d_dev *v3d) - } - - ret = drm_sched_init(&v3d->queue[V3D_RENDER].sched, -- &v3d_sched_ops, -+ &v3d_render_sched_ops, - hw_jobs_limit, job_hang_limit, - msecs_to_jiffies(hang_limit_ms), - "v3d_render"); diff --git a/target/linux/brcm2708/patches-4.19/950-0586-drm-v3d-Add-missing-implicit-synchronization.patch b/target/linux/brcm2708/patches-4.19/950-0586-drm-v3d-Add-missing-implicit-synchronization.patch deleted file mode 100644 index f9c49fc517..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0586-drm-v3d-Add-missing-implicit-synchronization.patch +++ /dev/null @@ -1,279 +0,0 @@ -From 7713f79b0a5473eb0b8456d36b99ae00815dd8a1 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 27 Mar 2019 17:44:40 -0700 -Subject: [PATCH 586/806] drm/v3d: Add missing implicit synchronization. - -It is the expectation of existing userspace (X11 + Mesa, in -particular) that jobs submitted to the kernel against a shared BO will -get implicitly synchronized by their submission order. If we want to -allow clever userspace to disable implicit synchronization, we should -do that under its own submit flag (as amdgpu and lima do). - -Note that we currently only implicitly sync for the rendering pass, -not binning -- if you texture-from-pixmap in the binning vertex shader -(vertex coordinate generation), you'll miss out on synchronization. - -Fixes flickering when multiple clients are running in parallel, -particularly GL apps and compositors. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/v3d/v3d_drv.h | 10 +--- - drivers/gpu/drm/v3d/v3d_gem.c | 98 ++++++++++++++++++++++++++++++--- - drivers/gpu/drm/v3d/v3d_sched.c | 45 ++------------- - 3 files changed, 96 insertions(+), 57 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_drv.h -+++ b/drivers/gpu/drm/v3d/v3d_drv.h -@@ -186,8 +186,9 @@ struct v3d_job { - struct v3d_bo **bo; - u32 bo_count; - -- /* An optional fence userspace can pass in for the job to depend on. */ -- struct dma_fence *in_fence; -+ struct dma_fence **deps; -+ int deps_count; -+ int deps_size; - - /* v3d fence to be signaled by IRQ handler when the job is complete. */ - struct dma_fence *irq_fence; -@@ -219,11 +220,6 @@ struct v3d_bin_job { - struct v3d_render_job { - struct v3d_job base; - -- /* Optional fence for the binner, to depend on before starting -- * our job. -- */ -- struct dma_fence *bin_done_fence; -- - /* GPU virtual addresses of the start/end of the CL job. */ - u32 start, end; - ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -218,6 +218,71 @@ v3d_unlock_bo_reservations(struct v3d_bo - ww_acquire_fini(acquire_ctx); - } - -+static int -+v3d_add_dep(struct v3d_job *job, struct dma_fence *fence) -+{ -+ if (!fence) -+ return 0; -+ -+ if (job->deps_size == job->deps_count) { -+ int new_deps_size = max(job->deps_size * 2, 4); -+ struct dma_fence **new_deps = -+ krealloc(job->deps, new_deps_size * sizeof(*new_deps), -+ GFP_KERNEL); -+ if (!new_deps) { -+ dma_fence_put(fence); -+ return -ENOMEM; -+ } -+ -+ job->deps = new_deps; -+ job->deps_size = new_deps_size; -+ } -+ -+ job->deps[job->deps_count++] = fence; -+ -+ return 0; -+} -+ -+/** -+ * Adds the required implicit fences before executing the job -+ * -+ * Userspace (X11 + Mesa) requires that a job submitted against a shared BO -+ * from one fd will implicitly synchronize against previous jobs submitted -+ * against that BO from other fds. -+ * -+ * Currently we don't bother trying to track the shared BOs, and instead just -+ * sync everything. However, our synchronization is only for the render pass -+ * -- the binning stage (VS coordinate calculations) ignores implicit sync, -+ * since using shared buffers for texture coordinates seems unlikely, and -+ * implicitly syncing them would break bin/render parallelism. If we want to -+ * fix that, we should introduce a flag when VS texturing has been used in the -+ * binning stage, or a set of flags for which BOs are sampled during binning. -+ */ -+static int -+v3d_add_implicit_fences(struct v3d_job *job, struct v3d_bo *bo) -+{ -+ int i, ret, nr_fences; -+ struct dma_fence **fences; -+ -+ ret = reservation_object_get_fences_rcu(bo->resv, NULL, -+ &nr_fences, &fences); -+ if (ret || !nr_fences) -+ return ret; -+ -+ for (i = 0; i < nr_fences; i++) { -+ ret = v3d_add_dep(job, fences[i]); -+ if (ret) -+ break; -+ } -+ -+ /* Free any remaining fences after error. */ -+ for (; i < nr_fences; i++) -+ dma_fence_put(fences[i]); -+ kfree(fences); -+ -+ return ret; -+} -+ - /* Takes the reservation lock on all the BOs being referenced, so that - * at queue submit time we can update the reservations. - * -@@ -226,10 +291,11 @@ v3d_unlock_bo_reservations(struct v3d_bo - * to v3d, so we don't attach dma-buf fences to them. - */ - static int --v3d_lock_bo_reservations(struct v3d_bo **bos, -- int bo_count, -+v3d_lock_bo_reservations(struct v3d_job *job, - struct ww_acquire_ctx *acquire_ctx) - { -+ struct v3d_bo **bos = job->bo; -+ int bo_count = job->bo_count; - int contended_lock = -1; - int i, ret; - -@@ -281,6 +347,13 @@ retry: - * before we commit the CL to the hardware. - */ - for (i = 0; i < bo_count; i++) { -+ ret = v3d_add_implicit_fences(job, bos[i]); -+ if (ret) { -+ v3d_unlock_bo_reservations(bos, bo_count, -+ acquire_ctx); -+ return ret; -+ } -+ - ret = reservation_object_reserve_shared(bos[i]->resv); - if (ret) { - v3d_unlock_bo_reservations(bos, bo_count, -@@ -383,7 +456,10 @@ v3d_job_free(struct kref *ref) - } - kvfree(job->bo); - -- dma_fence_put(job->in_fence); -+ for (i = 0; i < job->deps_count; i++) -+ dma_fence_put(job->deps[i]); -+ kfree(job->deps); -+ - dma_fence_put(job->irq_fence); - dma_fence_put(job->done_fence); - -@@ -464,15 +540,20 @@ v3d_job_init(struct v3d_dev *v3d, struct - struct v3d_job *job, void (*free)(struct kref *ref), - u32 in_sync) - { -+ struct dma_fence *in_fence = NULL; - int ret; - - job->v3d = v3d; - job->free = free; - -- ret = drm_syncobj_find_fence(file_priv, in_sync, 0, &job->in_fence); -+ ret = drm_syncobj_find_fence(file_priv, in_sync, 0, &in_fence); - if (ret == -EINVAL) - return ret; - -+ ret = v3d_add_dep(job, in_fence); -+ if (ret) -+ return ret; -+ - kref_init(&job->refcount); - - return 0; -@@ -590,8 +671,7 @@ v3d_submit_cl_ioctl(struct drm_device *d - if (ret) - goto fail; - -- ret = v3d_lock_bo_reservations(render->base.bo, render->base.bo_count, -- &acquire_ctx); -+ ret = v3d_lock_bo_reservations(&render->base, &acquire_ctx); - if (ret) - goto fail; - -@@ -601,7 +681,8 @@ v3d_submit_cl_ioctl(struct drm_device *d - if (ret) - goto fail_unreserve; - -- render->bin_done_fence = dma_fence_get(bin->base.done_fence); -+ ret = v3d_add_dep(&render->base, -+ dma_fence_get(bin->base.done_fence)); - } - - ret = v3d_push_job(v3d_priv, &render->base, V3D_RENDER); -@@ -692,8 +773,7 @@ v3d_submit_tfu_ioctl(struct drm_device * - } - spin_unlock(&file_priv->table_lock); - -- ret = v3d_lock_bo_reservations(job->base.bo, job->base.bo_count, -- &acquire_ctx); -+ ret = v3d_lock_bo_reservations(&job->base, &acquire_ctx); - if (ret) - goto fail; - ---- a/drivers/gpu/drm/v3d/v3d_sched.c -+++ b/drivers/gpu/drm/v3d/v3d_sched.c -@@ -67,47 +67,10 @@ v3d_job_dependency(struct drm_sched_job - struct drm_sched_entity *s_entity) - { - struct v3d_job *job = to_v3d_job(sched_job); -- struct dma_fence *fence; -- -- fence = job->in_fence; -- if (fence) { -- job->in_fence = NULL; -- return fence; -- } -- -- return NULL; --} - --/** -- * Returns the fences that the render job depends on, one by one. -- * v3d_job_run() won't be called until all of them have been signaled. -- */ --static struct dma_fence * --v3d_render_job_dependency(struct drm_sched_job *sched_job, -- struct drm_sched_entity *s_entity) --{ -- struct v3d_render_job *job = to_render_job(sched_job); -- struct dma_fence *fence; -- -- fence = v3d_job_dependency(sched_job, s_entity); -- if (fence) -- return fence; -- -- /* If we had a bin job, the render job definitely depends on -- * it. We first have to wait for bin to be scheduled, so that -- * its done_fence is created. -- */ -- fence = job->bin_done_fence; -- if (fence) { -- job->bin_done_fence = NULL; -- return fence; -- } -- -- /* XXX: Wait on a fence for switching the GMP if necessary, -- * and then do so. -- */ -- -- return fence; -+ if (!job->deps_count) -+ return NULL; -+ return job->deps[--job->deps_count]; - } - - static struct dma_fence *v3d_bin_job_run(struct drm_sched_job *sched_job) -@@ -329,7 +292,7 @@ static const struct drm_sched_backend_op - }; - - static const struct drm_sched_backend_ops v3d_render_sched_ops = { -- .dependency = v3d_render_job_dependency, -+ .dependency = v3d_job_dependency, - .run_job = v3d_render_job_run, - .timedout_job = v3d_render_job_timedout, - .free_job = v3d_job_free, diff --git a/target/linux/brcm2708/patches-4.19/950-0586-overlays-Add-i2c3-6-and-uart2-5-overlays.patch b/target/linux/brcm2708/patches-4.19/950-0586-overlays-Add-i2c3-6-and-uart2-5-overlays.patch new file mode 100644 index 0000000000..d1d8f72a0a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0586-overlays-Add-i2c3-6-and-uart2-5-overlays.patch @@ -0,0 +1,359 @@ +From 13be2bbd1a22f1b4d9fd260d80b561698f623ac1 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 30 May 2019 16:44:24 +0100 +Subject: [PATCH] overlays: Add i2c3-6 and uart2-5 overlays + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 8 +++ + arch/arm/boot/dts/overlays/README | 52 ++++++++++++++++++++ + arch/arm/boot/dts/overlays/i2c3-overlay.dts | 27 ++++++++++ + arch/arm/boot/dts/overlays/i2c4-overlay.dts | 27 ++++++++++ + arch/arm/boot/dts/overlays/i2c5-overlay.dts | 27 ++++++++++ + arch/arm/boot/dts/overlays/i2c6-overlay.dts | 27 ++++++++++ + arch/arm/boot/dts/overlays/uart2-overlay.dts | 27 ++++++++++ + arch/arm/boot/dts/overlays/uart3-overlay.dts | 27 ++++++++++ + arch/arm/boot/dts/overlays/uart4-overlay.dts | 27 ++++++++++ + arch/arm/boot/dts/overlays/uart5-overlay.dts | 27 ++++++++++ + 10 files changed, 276 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/i2c3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c5-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c6-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart5-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -65,6 +65,10 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + i2c-sensor.dtbo \ + i2c0-bcm2708.dtbo \ + i2c1-bcm2708.dtbo \ ++ i2c3.dtbo \ ++ i2c4.dtbo \ ++ i2c5.dtbo \ ++ i2c6.dtbo \ + i2s-gpio28-31.dtbo \ + ilitek251x.dtbo \ + iqaudio-codec.dtbo \ +@@ -149,6 +153,10 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + tpm-slb9670.dtbo \ + uart0.dtbo \ + uart1.dtbo \ ++ uart2.dtbo \ ++ uart3.dtbo \ ++ uart4.dtbo \ ++ uart5.dtbo \ + udrc.dtbo \ + upstream.dtbo \ + vc4-fkms-v3d.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1137,6 +1137,34 @@ Params: sda1_pin GPIO pin + "yes") + + ++Name: i2c3 ++Info: Enable the i2c3 bus ++Load: dtoverlay=i2c3, ++Params: pins_2_3 Use GPIOs 2 and 3 ++ pins_4_5 Use GPIOs 4 and 5 (default) ++ ++ ++Name: i2c4 ++Info: Enable the i2c4 bus ++Load: dtoverlay=i2c4, ++Params: pins_6_7 Use GPIOs 6 and 7 ++ pins_8_9 Use GPIOs 8 and 9 (default) ++ ++ ++Name: i2c5 ++Info: Enable the i2c5 bus ++Load: dtoverlay=i2c5, ++Params: pins_10_11 Use GPIOs 10 and 11 ++ pins_12_13 Use GPIOs 12 and 13 (default) ++ ++ ++Name: i2c6 ++Info: Enable the i2c6 bus ++Load: dtoverlay=i2c6, ++Params: pins_0_1 Use GPIOs 0 and 1 ++ pins_22_23 Use GPIOs 22 and 23 (default) ++ ++ + Name: i2s-gpio28-31 + Info: move I2S function block to GPIO 28 to 31 + Load: dtoverlay=i2s-gpio28-31 +@@ -2199,6 +2227,30 @@ Params: txd1_pin GPIO pin + rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) + + ++Name: uart2 ++Info: Enable uart 2 on GPIOs 0-3 ++Load: dtoverlay=uart2, ++Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off) ++ ++ ++Name: uart3 ++Info: Enable uart 3 on GPIOs 4-7 ++Load: dtoverlay=uart3, ++Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off) ++ ++ ++Name: uart4 ++Info: Enable uart 4 on GPIOs 8-11 ++Load: dtoverlay=uart4, ++Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off) ++ ++ ++Name: uart5 ++Info: Enable uart 5 on GPIOs 12-15 ++Load: dtoverlay=uart5, ++Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off) ++ ++ + Name: udrc + Info: Configures the NW Digital Radio UDRC Hat + Load: dtoverlay=udrc,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c3-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&i2c3>; ++ __overlay__ { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c3_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c3_pins>; ++ __dormant__ { ++ brcm,pins = <2 3>; ++ }; ++ }; ++ ++ __overrides__ { ++ pins_2_3 = <0>,"=1"; ++ pins_4_5 = <0>,"!1"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c4-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&i2c4>; ++ __overlay__ { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c4_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c4_pins>; ++ __dormant__ { ++ brcm,pins = <6 7>; ++ }; ++ }; ++ ++ __overrides__ { ++ pins_6_7 = <0>,"=1"; ++ pins_8_9 = <0>,"!1"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c5-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&i2c5>; ++ __overlay__ { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c5_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c5_pins>; ++ __dormant__ { ++ brcm,pins = <10 11>; ++ }; ++ }; ++ ++ __overrides__ { ++ pins_10_11 = <0>,"=1"; ++ pins_12_13 = <0>,"!1"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c6-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&i2c6>; ++ __overlay__ { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c6_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c6_pins>; ++ __dormant__ { ++ brcm,pins = <0 1>; ++ }; ++ }; ++ ++ __overrides__ { ++ pins_0_1 = <0>,"=1"; ++ pins_22_23 = <0>,"!1"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/uart2-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&uart2>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart2_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart2_pins>; ++ __dormant__ { ++ brcm,pins = <0 1 2 3>; ++ brcm,pull = <0 2 2 0>; ++ }; ++ }; ++ ++ __overrides__ { ++ ctsrts = <0>,"=1"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/uart3-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&uart3>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart3_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart3_pins>; ++ __dormant__ { ++ brcm,pins = <4 5 6 7>; ++ brcm,pull = <0 2 2 0>; ++ }; ++ }; ++ ++ __overrides__ { ++ ctsrts = <0>,"=1"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/uart4-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&uart4>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart4_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart4_pins>; ++ __dormant__ { ++ brcm,pins = <8 9 10 11>; ++ brcm,pull = <0 2 2 0>; ++ }; ++ }; ++ ++ __overrides__ { ++ ctsrts = <0>,"=1"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/uart5-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&uart5>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart5_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart5_pins>; ++ __dormant__ { ++ brcm,pins = <12 13 14 15>; ++ brcm,pull = <0 2 2 0>; ++ }; ++ }; ++ ++ __overrides__ { ++ ctsrts = <0>,"=1"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0587-drm-vc4-Fix-synchronization-firmwarekms-against-GL-r.patch b/target/linux/brcm2708/patches-4.19/950-0587-drm-vc4-Fix-synchronization-firmwarekms-against-GL-r.patch deleted file mode 100644 index 27f0d8f707..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0587-drm-vc4-Fix-synchronization-firmwarekms-against-GL-r.patch +++ /dev/null @@ -1,44 +0,0 @@ -From b0fedd829bb6725fef7b2667c85badc6b4a8e5e0 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 28 Mar 2019 11:58:51 -0700 -Subject: [PATCH 587/806] drm/vc4: Fix synchronization firmwarekms against GL - rendering. - -We would present the framebuffer immediately without waiting for -rendering to finish first, resulting in stuttering and flickering as a -window was dragged around when the GPU was busy enough to not just win -the race. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -15,6 +15,7 @@ - */ - - #include "drm/drm_atomic_helper.h" -+#include "drm/drm_gem_framebuffer_helper.h" - #include "drm/drm_plane_helper.h" - #include "drm/drm_crtc_helper.h" - #include "drm/drm_fourcc.h" -@@ -291,7 +292,7 @@ static const struct drm_plane_funcs vc4_ - }; - - static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { -- .prepare_fb = NULL, -+ .prepare_fb = drm_gem_fb_prepare_fb, - .cleanup_fb = NULL, - .atomic_check = vc4_plane_atomic_check, - .atomic_update = vc4_primary_plane_atomic_update, -@@ -299,7 +300,7 @@ static const struct drm_plane_helper_fun - }; - - static const struct drm_plane_helper_funcs vc4_cursor_plane_helper_funcs = { -- .prepare_fb = NULL, -+ .prepare_fb = drm_gem_fb_prepare_fb, - .cleanup_fb = NULL, - .atomic_check = vc4_plane_atomic_check, - .atomic_update = vc4_cursor_plane_atomic_update, diff --git a/target/linux/brcm2708/patches-4.19/950-0587-spi-devicetree-add-overlays-for-spi-3-to-6.patch b/target/linux/brcm2708/patches-4.19/950-0587-spi-devicetree-add-overlays-for-spi-3-to-6.patch new file mode 100644 index 0000000000..27de73d301 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0587-spi-devicetree-add-overlays-for-spi-3-to-6.patch @@ -0,0 +1,581 @@ +From a4ea446a07d7ba010c3c32286a22dc89cffa1e54 Mon Sep 17 00:00:00 2001 +From: Martin Sperl +Date: Sun, 12 May 2019 16:17:08 +0000 +Subject: [PATCH] spi: devicetree: add overlays for spi 3 to 6 + +Signed-off-by: Martin Sperl +--- + arch/arm/boot/dts/overlays/Makefile | 8 ++ + arch/arm/boot/dts/overlays/README | 104 ++++++++++++++++++ + .../boot/dts/overlays/spi3-1cs-overlay.dts | 44 ++++++++ + .../boot/dts/overlays/spi3-2cs-overlay.dts | 56 ++++++++++ + .../boot/dts/overlays/spi4-1cs-overlay.dts | 44 ++++++++ + .../boot/dts/overlays/spi4-2cs-overlay.dts | 56 ++++++++++ + .../boot/dts/overlays/spi5-1cs-overlay.dts | 44 ++++++++ + .../boot/dts/overlays/spi5-2cs-overlay.dts | 56 ++++++++++ + .../boot/dts/overlays/spi6-1cs-overlay.dts | 44 ++++++++ + .../boot/dts/overlays/spi6-2cs-overlay.dts | 56 ++++++++++ + 10 files changed, 512 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -144,6 +144,14 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + spi2-1cs.dtbo \ + spi2-2cs.dtbo \ + spi2-3cs.dtbo \ ++ spi3-1cs.dtbo \ ++ spi3-2cs.dtbo \ ++ spi4-1cs.dtbo \ ++ spi4-2cs.dtbo \ ++ spi5-1cs.dtbo \ ++ spi5-2cs.dtbo \ ++ spi6-1cs.dtbo \ ++ spi6-2cs.dtbo \ + ssd1306.dtbo \ + superaudioboard.dtbo \ + sx150x.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -2085,6 +2085,110 @@ Params: cs0_pin GPIO pin + is 'okay' or enabled). + + ++Name: spi3-1cs ++Info: Enables spi3 with a single chip select (CS) line and associated spidev ++ dev node. The gpio pin number for the CS line and spidev device node ++ creation are configurable. ++Load: dtoverlay=spi3-1cs,= ++Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). ++ cs0_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev3.0 (default ++ is 'on' or enabled). ++ ++ ++Name: spi3-2cs ++Info: Enables spi3 with two chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++Load: dtoverlay=spi3-2cs,= ++Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). ++ cs1_pin GPIO pin for CS1 (default 24 - BCM SPI3_CE1). ++ cs0_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev3.0 (default ++ is 'on' or enabled). ++ cs1_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev3.1 (default ++ is 'on' or enabled). ++ ++ ++Name: spi4-1cs ++Info: Enables spi4 with a single chip select (CS) line and associated spidev ++ dev node. The gpio pin number for the CS line and spidev device node ++ creation are configurable. ++Load: dtoverlay=spi4-1cs,= ++Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). ++ cs0_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev4.0 (default ++ is 'on' or enabled). ++ ++ ++Name: spi4-2cs ++Info: Enables spi4 with two chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++Load: dtoverlay=spi4-2cs,= ++Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). ++ cs1_pin GPIO pin for CS1 (default 25 - BCM SPI4_CE1). ++ cs0_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev4.0 (default ++ is 'on' or enabled). ++ cs1_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev4.1 (default ++ is 'on' or enabled). ++ ++ ++Name: spi5-1cs ++Info: Enables spi5 with a single chip select (CS) line and associated spidev ++ dev node. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++Load: dtoverlay=spi5-1cs,= ++Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). ++ cs0_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev5.0 (default ++ is 'on' or enabled). ++ ++ ++Name: spi5-2cs ++Info: Enables spi5 with two chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++Load: dtoverlay=spi5-2cs,= ++Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). ++ cs1_pin GPIO pin for CS1 (default 26 - BCM SPI5_CE1). ++ cs0_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev5.0 (default ++ is 'on' or enabled). ++ cs1_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev5.1 (default ++ is 'on' or enabled). ++ ++ ++Name: spi6-1cs ++Info: Enables spi6 with a single chip select (CS) line and associated spidev ++ dev node. The gpio pin number for the CS line and spidev device node ++ creation are configurable. ++Load: dtoverlay=spi6-1cs,= ++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). ++ cs0_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev6.0 (default ++ is 'on' or enabled). ++ ++ ++Name: spi6-2cs ++Info: Enables spi6 with two chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++Load: dtoverlay=spi6-2cs,= ++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). ++ cs1_pin GPIO pin for CS1 (default 27 - BCM SPI6_CE1). ++ cs0_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev6.0 (default ++ is 'on' or enabled). ++ cs1_spidev Set to 'off' to prevent the creation of a ++ userspace device node /dev/spidev6.1 (default ++ is 'on' or enabled). ++ ++ + Name: ssd1306 + Info: Overlay for activation of SSD1306 over I2C OLED display framebuffer. + Load: dtoverlay=ssd1306,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts +@@ -0,0 +1,44 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&spi3_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <0>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi3>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi3_pins &spi3_cs_pins>; ++ cs-gpios = <&gpio 0 1>; ++ status = "okay"; ++ ++ spidev3_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs0_spidev = <&spidev3_0>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts +@@ -0,0 +1,56 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&spi3_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <0 24>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi3>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi3_pins &spi3_cs_pins>; ++ cs-gpios = <&gpio 0 1>, <&gpio 24 1>; ++ status = "okay"; ++ ++ spidev3_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ ++ spidev3_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&frag0>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs0_spidev = <&spidev3_0>,"status"; ++ cs1_spidev = <&spidev3_1>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts +@@ -0,0 +1,44 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&spi4_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <4>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi4>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi4_pins &spi4_cs_pins>; ++ cs-gpios = <&gpio 4 1>; ++ status = "okay"; ++ ++ spidev4_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs0_spidev = <&spidev4_0>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts +@@ -0,0 +1,56 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&spi4_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <4 25>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi4>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi4_pins &spi4_cs_pins>; ++ cs-gpios = <&gpio 4 1>, <&gpio 25 1>; ++ status = "okay"; ++ ++ spidev4_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ ++ spidev4_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&frag0>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs0_spidev = <&spidev4_0>,"status"; ++ cs1_spidev = <&spidev4_1>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts +@@ -0,0 +1,44 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&spi5_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <12>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi5>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi5_pins &spi5_cs_pins>; ++ cs-gpios = <&gpio 12 1>; ++ status = "okay"; ++ ++ spidev5_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs0_spidev = <&spidev5_0>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts +@@ -0,0 +1,56 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&spi5_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <12 26>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi5>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi5_pins &spi5_cs_pins>; ++ cs-gpios = <&gpio 12 1>, <&gpio 26 1>; ++ status = "okay"; ++ ++ spidev5_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ ++ spidev5_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&frag0>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs0_spidev = <&spidev5_0>,"status"; ++ cs1_spidev = <&spidev5_1>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts +@@ -0,0 +1,44 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&spi6_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <18>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi6>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi6_pins &spi6_cs_pins>; ++ cs-gpios = <&gpio 18 1>; ++ status = "okay"; ++ ++ spidev6_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs0_spidev = <&spidev6_0>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts +@@ -0,0 +1,56 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2838"; ++ ++ fragment@0 { ++ target = <&spi6_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <18 27>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi6>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi6_pins &spi6_cs_pins>; ++ cs-gpios = <&gpio 18 1>, <&gpio 27 1>; ++ status = "okay"; ++ ++ spidev6_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ ++ spidev6_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&frag0>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs0_spidev = <&spidev6_0>,"status"; ++ cs1_spidev = <&spidev6_1>,"status"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0588-drm-vc4-Make-sure-that-vblank-waits-work-without-v3d.patch b/target/linux/brcm2708/patches-4.19/950-0588-drm-vc4-Make-sure-that-vblank-waits-work-without-v3d.patch deleted file mode 100644 index bb0c8552a2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0588-drm-vc4-Make-sure-that-vblank-waits-work-without-v3d.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 561918ec5e668f9d940051737d861ee0592816f6 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 29 Mar 2019 12:04:36 -0700 -Subject: [PATCH 588/806] drm/vc4: Make sure that vblank waits work without v3d - loaded. - -This flag exists to protect legacy drivers, but when vc4's v3d doesn't -probe, it doesn't get set up by vc4_v3d.c's call of drm_irq_install. -This resulted in applications running as fast as possible, and laggy -performance from compton as it had to wait for the latest rendering by -the application for its presentation. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_kms.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/gpu/drm/vc4/vc4_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_kms.c -@@ -422,6 +422,7 @@ int vc4_kms_load(struct drm_device *dev) - /* Set support for vblank irq fast disable, before drm_vblank_init() */ - dev->vblank_disable_immediate = true; - -+ dev->irq_enabled = true; - ret = drm_vblank_init(dev, dev->mode_config.num_crtc); - if (ret < 0) { - dev_err(dev->dev, "failed to initialize vblank\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0588-overlays-Add-the-spi-gpio40-45-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0588-overlays-Add-the-spi-gpio40-45-overlay.patch new file mode 100644 index 0000000000..26930baadd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0588-overlays-Add-the-spi-gpio40-45-overlay.patch @@ -0,0 +1,80 @@ +From 726da40b8c272d181a41686195f91b914363167b Mon Sep 17 00:00:00 2001 +From: Tim Gover +Date: Tue, 22 Jan 2019 10:49:41 +0000 +Subject: [PATCH] overlays: Add the spi-gpio40-45 overlay + +The 2711 B0 boot EEPROM is programmed via SPI0 on GPIO +pins 40-43 CS0. Add a device tree overlay to optionally +change the SPI0 pinmux from the external GPIO pins to +the boot EEPROM pins. +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 ++++ + .../dts/overlays/spi-gpio40-45-overlay.dts | 36 +++++++++++++++++++ + 3 files changed, 43 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -135,6 +135,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + smi-dev.dtbo \ + smi-nand.dtbo \ + spi-gpio35-39.dtbo \ ++ spi-gpio40-45.dtbo \ + spi-rtc.dtbo \ + spi0-cs.dtbo \ + spi0-hw-cs.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1967,6 +1967,12 @@ Load: dtoverlay=spi-gpio35-39 + Params: + + ++Name: spi-gpio40-45 ++Info: Move SPI function block to GPIOs 40 to 45 ++Load: dtoverlay=spi-gpio40-45 ++Params: ++ ++ + Name: spi-rtc + Info: Adds support for a number of SPI Real Time Clock devices + Load: dtoverlay=spi-rtc,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts +@@ -0,0 +1,36 @@ ++/* ++ * Boot EEPROM overlay ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0_cs_pins>; ++ __overlay__ { ++ brcm,pins = <45 44 43>; ++ brcm,function = <1>; /* output */ ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spi0_pins>; ++ __overlay__ { ++ brcm,pins = <40 41 42>; ++ brcm,function = <3>; /* alt4 */ ++ status = "okay"; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0589-config-Permit-LPAE-and-PCIE_BRCMSTB-on-BCM2835.patch b/target/linux/brcm2708/patches-4.19/950-0589-config-Permit-LPAE-and-PCIE_BRCMSTB-on-BCM2835.patch new file mode 100644 index 0000000000..a38cc6537e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0589-config-Permit-LPAE-and-PCIE_BRCMSTB-on-BCM2835.patch @@ -0,0 +1,44 @@ +From 0e8ed7a892a510383017cdddee7b772473f1f7c8 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 4 Sep 2018 11:50:25 +0100 +Subject: [PATCH] config: Permit LPAE and PCIE_BRCMSTB on BCM2835 + +--- + arch/arm/mach-bcm/Kconfig | 4 ++++ + drivers/pci/controller/Kconfig | 4 ++-- + 2 files changed, 6 insertions(+), 2 deletions(-) + +--- a/arch/arm/mach-bcm/Kconfig ++++ b/arch/arm/mach-bcm/Kconfig +@@ -161,6 +161,7 @@ config ARCH_BCM2835 + select GPIOLIB + select ARM_AMBA + select ARM_ERRATA_411920 if ARCH_MULTI_V6 ++ select ARM_GIC + select ARM_TIMER_SP804 + select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 + select TIMER_OF +@@ -169,6 +170,9 @@ config ARCH_BCM2835 + select PINCTRL + select PINCTRL_BCM2835 + select MFD_SYSCON if ARCH_MULTI_V7 ++ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE ++ select ZONE_DMA if ARM_LPAE ++ select MFD_CORE + help + This enables support for the Broadcom BCM2835 and BCM2836 SoCs. + This SoC is used in the Raspberry Pi and Roku 2 devices. +--- a/drivers/pci/controller/Kconfig ++++ b/drivers/pci/controller/Kconfig +@@ -280,9 +280,9 @@ config VMD + + config PCIE_BRCMSTB + tristate "Broadcom Brcmstb PCIe platform host driver" +- depends on ARCH_BRCMSTB || BMIPS_GENERIC ++ depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM2835 + depends on OF +- depends on SOC_BRCMSTB ++ depends on SOC_BRCMSTB || ARCH_BCM2835 + default ARCH_BRCMSTB || BMIPS_GENERIC + help + Adds support for Broadcom Settop Box PCIe host controller. diff --git a/target/linux/brcm2708/patches-4.19/950-0589-drm-vc4-Expose-the-format-modifiers-for-firmware-kms.patch b/target/linux/brcm2708/patches-4.19/950-0589-drm-vc4-Expose-the-format-modifiers-for-firmware-kms.patch deleted file mode 100644 index a25c567645..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0589-drm-vc4-Expose-the-format-modifiers-for-firmware-kms.patch +++ /dev/null @@ -1,80 +0,0 @@ -From c7fc1e1cf922bd548ac983ef48b883b6f83e35ae Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 18 Mar 2019 16:38:32 -0700 -Subject: [PATCH 589/806] drm/vc4: Expose the format modifiers for firmware - kms. - -This should technically not expose VC4_T_TILED on pi4. However, if we -don't expose anything, then userspace will assume that display can -handle whatever modifiers 3d can do (UIF on 2711). By exposing a -list, that will get intersected with what 3D can do so that we get T -tiling for display on 2710 and linear on 2711. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 33 +++++++++++++++++++++++++- - 1 file changed, 32 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -281,6 +281,27 @@ static void vc4_plane_destroy(struct drm - drm_plane_cleanup(plane); - } - -+static bool vc4_fkms_format_mod_supported(struct drm_plane *plane, -+ uint32_t format, -+ uint64_t modifier) -+{ -+ /* Support T_TILING for RGB formats only. */ -+ switch (format) { -+ case DRM_FORMAT_XRGB8888: -+ case DRM_FORMAT_ARGB8888: -+ switch (modifier) { -+ case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: -+ case DRM_FORMAT_MOD_LINEAR: -+ case DRM_FORMAT_MOD_BROADCOM_UIF: -+ return true; -+ default: -+ return false; -+ } -+ default: -+ return false; -+ } -+} -+ - static const struct drm_plane_funcs vc4_plane_funcs = { - .update_plane = drm_atomic_helper_update_plane, - .disable_plane = drm_atomic_helper_disable_plane, -@@ -289,6 +310,7 @@ static const struct drm_plane_funcs vc4_ - .reset = drm_atomic_helper_plane_reset, - .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, -+ .format_mod_supported = vc4_fkms_format_mod_supported, - }; - - static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { -@@ -316,6 +338,14 @@ static struct drm_plane *vc4_fkms_plane_ - u32 argb8888 = DRM_FORMAT_ARGB8888; - int ret = 0; - bool primary = (type == DRM_PLANE_TYPE_PRIMARY); -+ static const uint64_t modifiers[] = { -+ DRM_FORMAT_MOD_LINEAR, -+ /* VC4_T_TILED should come after linear, because we -+ * would prefer to scan out linear (less bus traffic). -+ */ -+ DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED, -+ DRM_FORMAT_MOD_INVALID, -+ }; - - vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), - GFP_KERNEL); -@@ -327,7 +357,8 @@ static struct drm_plane *vc4_fkms_plane_ - plane = &vc4_plane->base; - ret = drm_universal_plane_init(dev, plane, 0xff, - &vc4_plane_funcs, -- primary ? &xrgb8888 : &argb8888, 1, NULL, -+ primary ? &xrgb8888 : &argb8888, 1, -+ modifiers, - type, primary ? "primary" : "cursor"); - - if (type == DRM_PLANE_TYPE_PRIMARY) { diff --git a/target/linux/brcm2708/patches-4.19/950-0590-2711-Add-basic-64-bit-support.patch b/target/linux/brcm2708/patches-4.19/950-0590-2711-Add-basic-64-bit-support.patch new file mode 100644 index 0000000000..892914befa --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0590-2711-Add-basic-64-bit-support.patch @@ -0,0 +1,33 @@ +From 0e7db01b8ce2c2fb5596e7a9b7104e9947e5c269 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 8 Mar 2019 21:12:39 +0000 +Subject: [PATCH] 2711: Add basic 64-bit support + +This commit adds initial support for 64-bit 2711 builds. However, +it will only work as much as it does if the Pi4 RAM is limited to +1GB - more than that and several things break (SD card, coherent +allocations, etc.) + +Signed-off-by: Phil Elwell +--- + arch/arm64/boot/dts/broadcom/Makefile | 1 + + .../boot/dts/broadcom/bcm2711-rpi-4-b.dts | 3 + + 3 files changed, 1295 insertions(+) + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts + +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp + bcm2837-rpi-3-b-plus.dtb + dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb ++dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb + dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts +@@ -0,0 +1,3 @@ ++#define RPI364 ++ ++#include "../../../../arm/boot/dts/bcm2711-rpi-4-b.dts" diff --git a/target/linux/brcm2708/patches-4.19/950-0590-drm-vc4-Fix-vblank-timestamping-for-firmwarekms.patch b/target/linux/brcm2708/patches-4.19/950-0590-drm-vc4-Fix-vblank-timestamping-for-firmwarekms.patch deleted file mode 100644 index 2ad88a4b39..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0590-drm-vc4-Fix-vblank-timestamping-for-firmwarekms.patch +++ /dev/null @@ -1,45 +0,0 @@ -From c0041a9fe33d6031267d9f3e2372833908e97337 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Tue, 2 Apr 2019 13:29:00 -0700 -Subject: [PATCH 590/806] drm/vc4: Fix vblank timestamping for firmwarekms. - -The core doesn't expect a false return from the scanoutpos function in -normal usage, so we were doing the precise vblank timestamping path -and thus "immediate" vblank disables (even though firmwarekms can't -actually disable vblanks interrupts, sigh), and the kernel would get -confused when getting timestamp info when also turning vblanks back -on. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_crtc.c | 3 --- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 ++++++ - 2 files changed, 6 insertions(+), 3 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -133,9 +133,6 @@ bool vc4_crtc_get_scanoutpos(struct drm_ - int vblank_lines; - bool ret = false; - -- if (vc4->firmware_kms) -- return 0; -- - /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ - - /* Get optional system timestamp before query. */ ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -673,6 +673,12 @@ static int vc4_fkms_bind(struct device * - - vc4->firmware_kms = true; - -+ /* firmware kms doesn't have precise a scanoutpos implementation, so -+ * we can't do the precise vblank timestamp mode. -+ */ -+ drm->driver->get_scanout_position = NULL; -+ drm->driver->get_vblank_timestamp = NULL; -+ - vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); - if (!vc4_crtc) - return -ENOMEM; diff --git a/target/linux/brcm2708/patches-4.19/950-0591-ARM-dts-bcm283x-Correct-vchiq-compatible-string-2840.patch b/target/linux/brcm2708/patches-4.19/950-0591-ARM-dts-bcm283x-Correct-vchiq-compatible-string-2840.patch new file mode 100644 index 0000000000..29f3cdb32a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0591-ARM-dts-bcm283x-Correct-vchiq-compatible-string-2840.patch @@ -0,0 +1,76 @@ +From 91aa97cc3a193cfd29962e328f9d1da0d8e0aaff Mon Sep 17 00:00:00 2001 +From: 6by9 <6by9@users.noreply.github.com> +Date: Wed, 30 Jan 2019 14:22:03 +0000 +Subject: [PATCH] ARM: dts: bcm283x: Correct vchiq compatible string + (#2840) + +commit 499770ede3f829e80539f46b59b5f460dc327aa6 upstream. + +To allow VCHIQ to determine the correct cache line size, use the new +"brcm,bcm2836-vchiq" compatible string on BCM2836 and BCM2837. + +Signed-off-by: Phil Elwell +Acked-by: Stefan Wahren +Signed-off-by: Stefan Wahren +--- + arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +- + arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 2 +- + arch/arm/boot/dts/bcm2836-rpi.dtsi | 6 ++++++ + arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +- + arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 2 +- + 5 files changed, 10 insertions(+), 4 deletions(-) + create mode 100644 arch/arm/boot/dts/bcm2836-rpi.dtsi + +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -30,7 +30,7 @@ + #power-domain-cells = <1>; + }; + +- mailbox@7e00b840 { ++ vchiq: mailbox@7e00b840 { + compatible = "brcm,bcm2835-vchiq"; + reg = <0x7e00b840 0x3c>; + interrupts = <0 2>; +--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +@@ -1,7 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0 + /dts-v1/; + #include "bcm2836.dtsi" +-#include "bcm2835-rpi.dtsi" ++#include "bcm2836-rpi.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi +@@ -0,0 +1,6 @@ ++// SPDX-License-Identifier: GPL-2.0 ++#include "bcm2835-rpi.dtsi" ++ ++&vchiq { ++ compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; ++}; +--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +@@ -1,7 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0 + /dts-v1/; + #include "bcm2837.dtsi" +-#include "bcm2835-rpi.dtsi" ++#include "bcm2836-rpi.dtsi" + #include "bcm283x-rpi-lan7515.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" + +--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +@@ -1,7 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0 + /dts-v1/; + #include "bcm2837.dtsi" +-#include "bcm2835-rpi.dtsi" ++#include "bcm2836-rpi.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" + #include "bcm283x-rpi-usb-host.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" diff --git a/target/linux/brcm2708/patches-4.19/950-0591-gpu-vc4-fkms-Switch-to-the-newer-mailbox-frame-buffe.patch b/target/linux/brcm2708/patches-4.19/950-0591-gpu-vc4-fkms-Switch-to-the-newer-mailbox-frame-buffe.patch deleted file mode 100644 index 0b2e2d7d47..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0591-gpu-vc4-fkms-Switch-to-the-newer-mailbox-frame-buffe.patch +++ /dev/null @@ -1,216 +0,0 @@ -From 3819888738de087ba726ceaa2ab20503f164f1ed Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 26 Mar 2019 14:43:06 +0000 -Subject: [PATCH 591/806] gpu: vc4-fkms: Switch to the newer mailbox frame - buffer API. - -The old mailbox FB API was ideally deprecated but still used by -the FKMS driver. -Update to the newer API. - -NB This needs current firmware that accepts ARM allocated buffers -through the newer API. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 109 +++++++++++---------- - include/soc/bcm2835/raspberrypi-firmware.h | 10 ++ - 2 files changed, 67 insertions(+), 52 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -28,6 +28,25 @@ - #include "vc4_regs.h" - #include - -+struct fb_alloc_tags { -+ struct rpi_firmware_property_tag_header tag1; -+ u32 xres, yres; -+ struct rpi_firmware_property_tag_header tag2; -+ u32 xres_virtual, yres_virtual; -+ struct rpi_firmware_property_tag_header tag3; -+ u32 bpp; -+ struct rpi_firmware_property_tag_header tag4; -+ u32 xoffset, yoffset; -+ struct rpi_firmware_property_tag_header tag5; -+ u32 base, screen_size; -+ struct rpi_firmware_property_tag_header tag6; -+ u32 pitch; -+ struct rpi_firmware_property_tag_header tag7; -+ u32 alpha_mode; -+ struct rpi_firmware_property_tag_header tag8; -+ u32 layer; -+}; -+ - /* The firmware delivers a vblank interrupt to us through the SMI - * hardware, which has only this one register. - */ -@@ -121,45 +140,39 @@ static void vc4_primary_plane_atomic_upd - struct drm_plane_state *old_state) - { - struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -- struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); - struct drm_plane_state *state = plane->state; - struct drm_framebuffer *fb = state->fb; - struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -- volatile struct fbinfo_s *fbinfo = vc4_plane->fbinfo; -+ u32 format = fb->format->format; -+ struct fb_alloc_tags fbinfo = { -+ .tag1 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT, -+ 8, 0, }, -+ .xres = state->crtc_w, -+ .yres = state->crtc_h, -+ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT, -+ 8, 0, }, -+ .xres_virtual = state->crtc_w, -+ .yres_virtual = state->crtc_h, -+ .tag3 = { RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH, 4, 0 }, -+ .bpp = 32, -+ .tag4 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET, 8, 0 }, -+ .xoffset = 0, -+ .yoffset = 0, -+ .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, -+ .base = bo->paddr + fb->offsets[0], -+ .screen_size = state->crtc_w * state->crtc_h * 4, -+ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, -+ .pitch = fb->pitches[0], -+ .tag7 = { RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE, 4, 0 }, -+ .alpha_mode = format == DRM_FORMAT_ARGB8888 ? 0 : 2, -+ .tag8 = { RPI_FIRMWARE_FRAMEBUFFER_SET_LAYER, 4, 0 }, -+ .layer = -127, -+ }; - u32 bpp = 32; - int ret; - -- fbinfo->xres = state->crtc_w; -- fbinfo->yres = state->crtc_h; -- fbinfo->xres_virtual = state->crtc_w; -- fbinfo->yres_virtual = state->crtc_h; -- fbinfo->bpp = bpp; -- fbinfo->xoffset = state->crtc_x; -- fbinfo->yoffset = state->crtc_y; -- fbinfo->base = bo->paddr + fb->offsets[0]; -- fbinfo->pitch = fb->pitches[0]; -- - if (fb->modifier == DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED) -- fbinfo->bpp |= BIT(31); -- -- /* A bug in the firmware makes it so that if the fb->base is -- * set to nonzero, the configured pitch gets overwritten with -- * the previous pitch. So, to get the configured pitch -- * recomputed, we have to make it allocate itself a new buffer -- * in VC memory, first. -- */ -- if (vc4_plane->pitch != fb->pitches[0]) { -- u32 saved_base = fbinfo->base; -- fbinfo->base = 0; -- -- ret = rpi_firmware_transaction(vc4->firmware, -- RPI_FIRMWARE_CHAN_FB, -- vc4_plane->fbinfo_bus_addr); -- fbinfo->base = saved_base; -- -- vc4_plane->pitch = fbinfo->pitch; -- WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); -- } -+ fbinfo.bpp |= BIT(31); - - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%pad/%d\n", - plane->base.id, plane->name, -@@ -168,14 +181,13 @@ static void vc4_primary_plane_atomic_upd - bpp, - state->crtc_x, - state->crtc_y, -- &fbinfo->base, -+ &fbinfo.base, - fb->pitches[0]); - -- ret = rpi_firmware_transaction(vc4->firmware, -- RPI_FIRMWARE_CHAN_FB, -- vc4_plane->fbinfo_bus_addr); -- WARN_ON_ONCE(fbinfo->pitch != fb->pitches[0]); -- WARN_ON_ONCE(fbinfo->base != bo->paddr + fb->offsets[0]); -+ ret = rpi_firmware_property_list(vc4->firmware, &fbinfo, -+ sizeof(fbinfo)); -+ WARN_ON_ONCE(fbinfo.pitch != fb->pitches[0]); -+ WARN_ON_ONCE(fbinfo.base != bo->paddr + fb->offsets[0]); - - /* If the CRTC is on (or going to be on) and we're enabled, - * then unblank. Otherwise, stay blank until CRTC enable. -@@ -332,10 +344,10 @@ static const struct drm_plane_helper_fun - static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, - enum drm_plane_type type) - { -+ /* Primary and cursor planes only */ - struct drm_plane *plane = NULL; - struct vc4_fkms_plane *vc4_plane; -- u32 xrgb8888 = DRM_FORMAT_XRGB8888; -- u32 argb8888 = DRM_FORMAT_ARGB8888; -+ u32 formats[] = {DRM_FORMAT_ARGB8888, DRM_FORMAT_XRGB8888}; - int ret = 0; - bool primary = (type == DRM_PLANE_TYPE_PRIMARY); - static const uint64_t modifiers[] = { -@@ -357,22 +369,15 @@ static struct drm_plane *vc4_fkms_plane_ - plane = &vc4_plane->base; - ret = drm_universal_plane_init(dev, plane, 0xff, - &vc4_plane_funcs, -- primary ? &xrgb8888 : &argb8888, 1, -- modifiers, -+ formats, primary ? 2 : 1, modifiers, - type, primary ? "primary" : "cursor"); - -- if (type == DRM_PLANE_TYPE_PRIMARY) { -- vc4_plane->fbinfo = -- dma_alloc_coherent(dev->dev, -- sizeof(*vc4_plane->fbinfo), -- &vc4_plane->fbinfo_bus_addr, -- GFP_KERNEL); -- memset(vc4_plane->fbinfo, 0, sizeof(*vc4_plane->fbinfo)); -- -+ if (type == DRM_PLANE_TYPE_PRIMARY) - drm_plane_helper_add(plane, &vc4_primary_plane_helper_funcs); -- } else { -+ else - drm_plane_helper_add(plane, &vc4_cursor_plane_helper_funcs); -- } -+ -+ drm_plane_create_alpha_property(plane); - - return plane; - fail: ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -111,9 +111,15 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009, - RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a, - RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_LAYER = 0x0004000c, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_TRANSFORM = 0x0004000d, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_VSYNC = 0x0004000e, - RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, - RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, - RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014, - RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, - RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, - RPI_FIRMWARE_FRAMEBUFFER_TEST_DEPTH = 0x00044005, -@@ -122,6 +128,8 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009, - RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a, - RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b, -+ RPI_FIRMWARE_FRAMEBUFFER_TEST_LAYER = 0x0004400c, -+ RPI_FIRMWARE_FRAMEBUFFER_TEST_TRANSFORM = 0x0004400d, - RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e, - RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, - RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, -@@ -134,6 +142,8 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, - RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, - RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_LAYER = 0x0004800c, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_TRANSFORM = 0x0004800d, - RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, - - RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, diff --git a/target/linux/brcm2708/patches-4.19/950-0592-arm-dts-Change-downstream-vchiq-compatible-string.patch b/target/linux/brcm2708/patches-4.19/950-0592-arm-dts-Change-downstream-vchiq-compatible-string.patch new file mode 100644 index 0000000000..4fda05ef6d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0592-arm-dts-Change-downstream-vchiq-compatible-string.patch @@ -0,0 +1,59 @@ +From 00d8817ab207a9f60e94e87acf4f170155aecd48 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 6 Feb 2019 20:45:16 +0000 +Subject: [PATCH] arm: dts: Change downstream vchiq compatible string + +The new cache line size mechanism requires a different vchiq compatible +string on BCM2836 and BCM2837, but the downstream dts files didn't +inherit the upstream changes. + +See: https://github.com/raspberrypi/linux/issues/2643 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi.dtsi | 2 +- + arch/arm/boot/dts/bcm2709-rpi.dtsi | 5 +++++ + arch/arm/boot/dts/bcm2709.dtsi | 2 +- + arch/arm/boot/dts/bcm2710.dtsi | 2 +- + 4 files changed, 8 insertions(+), 3 deletions(-) + create mode 100644 arch/arm/boot/dts/bcm2709-rpi.dtsi + +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -68,7 +68,7 @@ + status = "disabled"; + }; + +- mailbox@7e00b840 { ++ vchiq: mailbox@7e00b840 { + compatible = "brcm,bcm2835-vchiq"; + reg = <0x7e00b840 0x3c>; + interrupts = <0 2>; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2709-rpi.dtsi +@@ -0,0 +1,5 @@ ++#include "bcm2708-rpi.dtsi" ++ ++&vchiq { ++ compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; ++}; +--- a/arch/arm/boot/dts/bcm2709.dtsi ++++ b/arch/arm/boot/dts/bcm2709.dtsi +@@ -1,6 +1,6 @@ + #include "bcm2836.dtsi" + #include "bcm270x.dtsi" +-#include "bcm2708-rpi.dtsi" ++#include "bcm2709-rpi.dtsi" + + / { + soc { +--- a/arch/arm/boot/dts/bcm2710.dtsi ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -1,6 +1,6 @@ + #include "bcm2837.dtsi" + #include "bcm270x.dtsi" +-#include "bcm2708-rpi.dtsi" ++#include "bcm2709-rpi.dtsi" + + / { + compatible = "brcm,bcm2837", "brcm,bcm2836"; diff --git a/target/linux/brcm2708/patches-4.19/950-0592-drm-vc4-Add-an-overlay-plane-to-vc4-firmware-kms.patch b/target/linux/brcm2708/patches-4.19/950-0592-drm-vc4-Add-an-overlay-plane-to-vc4-firmware-kms.patch deleted file mode 100644 index f374c2a0a4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0592-drm-vc4-Add-an-overlay-plane-to-vc4-firmware-kms.patch +++ /dev/null @@ -1,853 +0,0 @@ -From 953d85d97f59691dccbbca743c478a8b01f92b59 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 27 Mar 2019 17:45:01 +0000 -Subject: [PATCH 592/806] drm: vc4: Add an overlay plane to vc4-firmware-kms - -This uses a new API that is exposed via the mailbox service -to stick an element straight on the screen using DispmanX. - -The primary and cursor planes have also been switched to using -the new plane API, and it supports layering based on the DRM -zpos parameter. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 518 ++++++++++++++------- - drivers/gpu/drm/vc4/vc4_kms.c | 1 + - drivers/gpu/drm/vc4/vc_image_types.h | 143 ++++++ - include/soc/bcm2835/raspberrypi-firmware.h | 2 + - 4 files changed, 495 insertions(+), 169 deletions(-) - create mode 100644 drivers/gpu/drm/vc4/vc_image_types.h - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -26,8 +26,46 @@ - #include "linux/of_device.h" - #include "vc4_drv.h" - #include "vc4_regs.h" -+#include "vc_image_types.h" - #include - -+struct set_plane { -+ u8 display; -+ u8 plane_id; -+ u8 vc_image_type; -+ s8 layer; -+ -+ u16 width; -+ u16 height; -+ -+ u16 pitch; -+ u16 vpitch; -+ -+ u32 src_x; /* 16p16 */ -+ u32 src_y; /* 16p16 */ -+ -+ u32 src_w; /* 16p16 */ -+ u32 src_h; /* 16p16 */ -+ -+ s16 dst_x; -+ s16 dst_y; -+ -+ u16 dst_w; -+ u16 dst_h; -+ -+ u8 alpha; -+ u8 num_planes; -+ u8 is_vu; -+ u8 padding; -+ -+ u32 planes[4]; /* DMA address of each plane */ -+}; -+ -+struct mailbox_set_plane { -+ struct rpi_firmware_property_tag_header tag; -+ struct set_plane plane; -+}; -+ - struct fb_alloc_tags { - struct rpi_firmware_property_tag_header tag1; - u32 xres, yres; -@@ -47,6 +85,79 @@ struct fb_alloc_tags { - u32 layer; - }; - -+static const struct vc_image_format { -+ u32 drm; /* DRM_FORMAT_* */ -+ u32 vc_image; /* VC_IMAGE_* */ -+ u32 is_vu; -+} vc_image_formats[] = { -+ { -+ .drm = DRM_FORMAT_XRGB8888, -+ .vc_image = VC_IMAGE_XRGB8888, -+ }, -+ { -+ .drm = DRM_FORMAT_ARGB8888, -+ .vc_image = VC_IMAGE_ARGB8888, -+ }, -+/* -+ * FIXME: Need to resolve which DRM format goes to which vc_image format -+ * for the remaining RGBA and RGBX formats. -+ * { -+ * .drm = DRM_FORMAT_ABGR8888, -+ * .vc_image = VC_IMAGE_RGBA8888, -+ * }, -+ * { -+ * .drm = DRM_FORMAT_XBGR8888, -+ * .vc_image = VC_IMAGE_RGBA8888, -+ * }, -+ */ -+ { -+ .drm = DRM_FORMAT_RGB565, -+ .vc_image = VC_IMAGE_RGB565, -+ }, -+ { -+ .drm = DRM_FORMAT_RGB888, -+ .vc_image = VC_IMAGE_BGR888, -+ }, -+ { -+ .drm = DRM_FORMAT_BGR888, -+ .vc_image = VC_IMAGE_RGB888, -+ }, -+ { -+ .drm = DRM_FORMAT_YUV422, -+ .vc_image = VC_IMAGE_YUV422PLANAR, -+ }, -+ { -+ .drm = DRM_FORMAT_YUV420, -+ .vc_image = VC_IMAGE_YUV420, -+ }, -+ { -+ .drm = DRM_FORMAT_YVU420, -+ .vc_image = VC_IMAGE_YUV420, -+ .is_vu = 1, -+ }, -+ { -+ .drm = DRM_FORMAT_NV12, -+ .vc_image = VC_IMAGE_YUV420SP, -+ }, -+ { -+ .drm = DRM_FORMAT_NV21, -+ .vc_image = VC_IMAGE_YUV420SP, -+ .is_vu = 1, -+ }, -+}; -+ -+static const struct vc_image_format *vc4_get_vc_image_fmt(u32 drm_format) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < ARRAY_SIZE(vc_image_formats); i++) { -+ if (vc_image_formats[i].drm == drm_format) -+ return &vc_image_formats[i]; -+ } -+ -+ return NULL; -+} -+ - /* The firmware delivers a vblank interrupt to us through the SMI - * hardware, which has only this one register. - */ -@@ -113,6 +224,7 @@ struct vc4_fkms_plane { - struct fbinfo_s *fbinfo; - dma_addr_t fbinfo_bus_addr; - u32 pitch; -+ struct mailbox_set_plane mb; - }; - - static inline struct vc4_fkms_plane *to_vc4_fkms_plane(struct drm_plane *plane) -@@ -120,165 +232,183 @@ static inline struct vc4_fkms_plane *to_ - return (struct vc4_fkms_plane *)plane; - } - --/* Turns the display on/off. */ --static int vc4_plane_set_primary_blank(struct drm_plane *plane, bool blank) -+static int vc4_plane_set_blank(struct drm_plane *plane, bool blank) - { - struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); -+ struct mailbox_set_plane blank_mb = { -+ .tag = { RPI_FIRMWARE_SET_PLANE, sizeof(struct set_plane), 0 }, -+ .plane = { -+ .display = vc4_plane->mb.plane.display, -+ .plane_id = vc4_plane->mb.plane.plane_id, -+ } -+ }; -+ int ret; - -- u32 packet = blank; -- -- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary plane %s", -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] overlay plane %s", - plane->base.id, plane->name, - blank ? "blank" : "unblank"); - -- return rpi_firmware_property(vc4->firmware, -- RPI_FIRMWARE_FRAMEBUFFER_BLANK, -- &packet, sizeof(packet)); -+ if (blank) -+ ret = rpi_firmware_property_list(vc4->firmware, &blank_mb, -+ sizeof(blank_mb)); -+ else -+ ret = rpi_firmware_property_list(vc4->firmware, &vc4_plane->mb, -+ sizeof(vc4_plane->mb)); -+ -+ WARN_ONCE(ret, "%s: firmware call failed. Please update your firmware", -+ __func__); -+ return ret; - } - --static void vc4_primary_plane_atomic_update(struct drm_plane *plane, -- struct drm_plane_state *old_state) -+static void vc4_plane_atomic_update(struct drm_plane *plane, -+ struct drm_plane_state *old_state) - { -- struct vc4_dev *vc4 = to_vc4_dev(plane->dev); - struct drm_plane_state *state = plane->state; - struct drm_framebuffer *fb = state->fb; - struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -- u32 format = fb->format->format; -- struct fb_alloc_tags fbinfo = { -- .tag1 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT, -- 8, 0, }, -- .xres = state->crtc_w, -- .yres = state->crtc_h, -- .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT, -- 8, 0, }, -- .xres_virtual = state->crtc_w, -- .yres_virtual = state->crtc_h, -- .tag3 = { RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH, 4, 0 }, -- .bpp = 32, -- .tag4 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET, 8, 0 }, -- .xoffset = 0, -- .yoffset = 0, -- .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, -- .base = bo->paddr + fb->offsets[0], -- .screen_size = state->crtc_w * state->crtc_h * 4, -- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, -- .pitch = fb->pitches[0], -- .tag7 = { RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE, 4, 0 }, -- .alpha_mode = format == DRM_FORMAT_ARGB8888 ? 0 : 2, -- .tag8 = { RPI_FIRMWARE_FRAMEBUFFER_SET_LAYER, 4, 0 }, -- .layer = -127, -- }; -- u32 bpp = 32; -- int ret; -+ const struct drm_format_info *drm_fmt = fb->format; -+ const struct vc_image_format *vc_fmt = -+ vc4_get_vc_image_fmt(drm_fmt->format); -+ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); -+ struct mailbox_set_plane *mb = &vc4_plane->mb; -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); -+ int num_planes = fb->format->num_planes; -+ struct drm_display_mode *mode = &state->crtc->mode; - -- if (fb->modifier == DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED) -- fbinfo.bpp |= BIT(31); -+ mb->plane.vc_image_type = vc_fmt->vc_image; -+ mb->plane.width = fb->width; -+ mb->plane.height = fb->height; -+ mb->plane.pitch = fb->pitches[0]; -+ mb->plane.src_w = state->src_w; -+ mb->plane.src_h = state->src_h; -+ mb->plane.src_x = state->src_x; -+ mb->plane.src_y = state->src_y; -+ mb->plane.dst_w = state->crtc_w; -+ mb->plane.dst_h = state->crtc_h; -+ mb->plane.dst_x = state->crtc_x; -+ mb->plane.dst_y = state->crtc_y; -+ mb->plane.alpha = state->alpha >> 8; -+ mb->plane.layer = state->normalized_zpos ? -+ state->normalized_zpos : -127; -+ mb->plane.num_planes = num_planes; -+ mb->plane.is_vu = vc_fmt->is_vu; -+ mb->plane.planes[0] = bo->paddr + fb->offsets[0]; - -- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%pad/%d\n", -+ /* FIXME: If the dest rect goes off screen then clip the src rect so we -+ * don't have off-screen pixels. -+ */ -+ if (plane->type == DRM_PLANE_TYPE_CURSOR) { -+ /* There is no scaling on the cursor plane, therefore the calcs -+ * to alter the source crop as the cursor goes off the screen -+ * are simple. -+ */ -+ if (mb->plane.dst_x + mb->plane.dst_w > mode->hdisplay) { -+ mb->plane.dst_w = mode->hdisplay - mb->plane.dst_x; -+ mb->plane.src_w = (mode->hdisplay - mb->plane.dst_x) -+ << 16; -+ } -+ if (mb->plane.dst_y + mb->plane.dst_h > mode->vdisplay) { -+ mb->plane.dst_h = mode->vdisplay - mb->plane.dst_y; -+ mb->plane.src_h = (mode->vdisplay - mb->plane.dst_y) -+ << 16; -+ } -+ } -+ -+ if (num_planes > 1) { -+ /* Assume this must be YUV */ -+ /* Makes assumptions on the stride for the chroma planes as we -+ * can't easily plumb in non-standard pitches. -+ */ -+ mb->plane.planes[1] = bo->paddr + fb->offsets[1]; -+ if (num_planes > 2) -+ mb->plane.planes[2] = bo->paddr + fb->offsets[2]; -+ else -+ mb->plane.planes[2] = 0; -+ -+ /* Special case the YUV420 with U and V as line interleaved -+ * planes as we have special handling for that case. -+ */ -+ if (num_planes == 3 && -+ (fb->offsets[2] - fb->offsets[1]) == fb->pitches[1]) -+ mb->plane.vc_image_type = VC_IMAGE_YUV420_S; -+ } else { -+ mb->plane.planes[1] = 0; -+ mb->plane.planes[2] = 0; -+ } -+ mb->plane.planes[3] = 0; -+ -+ switch (fb->modifier) { -+ case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: -+ switch (mb->plane.vc_image_type) { -+ case VC_IMAGE_RGBX32: -+ mb->plane.vc_image_type = VC_IMAGE_TF_RGBX32; -+ break; -+ case VC_IMAGE_RGBA32: -+ mb->plane.vc_image_type = VC_IMAGE_TF_RGBA32; -+ break; -+ case VC_IMAGE_RGB565: -+ mb->plane.vc_image_type = VC_IMAGE_TF_RGB565; -+ break; -+ } -+ break; -+ case DRM_FORMAT_MOD_BROADCOM_SAND128: -+ mb->plane.vc_image_type = VC_IMAGE_YUV_UV; -+ mb->plane.pitch = fourcc_mod_broadcom_param(fb->modifier); -+ break; -+ } -+ -+ if (vc4_crtc) { -+ mb->plane.dst_x += vc4_crtc->overscan[0]; -+ mb->plane.dst_y += vc4_crtc->overscan[1]; -+ } -+ -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane update %dx%d@%d +dst(%d,%d, %d,%d) +src(%d,%d, %d,%d) 0x%08x/%08x/%08x/%d, alpha %u zpos %u\n", - plane->base.id, plane->name, -- state->crtc_w, -- state->crtc_h, -- bpp, -+ mb->plane.width, -+ mb->plane.height, -+ mb->plane.vc_image_type, - state->crtc_x, - state->crtc_y, -- &fbinfo.base, -- fb->pitches[0]); -- -- ret = rpi_firmware_property_list(vc4->firmware, &fbinfo, -- sizeof(fbinfo)); -- WARN_ON_ONCE(fbinfo.pitch != fb->pitches[0]); -- WARN_ON_ONCE(fbinfo.base != bo->paddr + fb->offsets[0]); -- -- /* If the CRTC is on (or going to be on) and we're enabled, -+ state->crtc_w, -+ state->crtc_h, -+ mb->plane.src_x, -+ mb->plane.src_y, -+ mb->plane.src_w, -+ mb->plane.src_h, -+ mb->plane.planes[0], -+ mb->plane.planes[1], -+ mb->plane.planes[2], -+ fb->pitches[0], -+ state->alpha, -+ state->normalized_zpos); -+ -+ /* -+ * Do NOT set now, as we haven't checked if the crtc is active or not. -+ * Set from vc4_plane_set_blank instead. -+ * -+ * If the CRTC is on (or going to be on) and we're enabled, - * then unblank. Otherwise, stay blank until CRTC enable. -- */ -+ */ - if (state->crtc->state->active) -- vc4_plane_set_primary_blank(plane, false); -+ vc4_plane_set_blank(plane, false); - } - --static void vc4_primary_plane_atomic_disable(struct drm_plane *plane, -- struct drm_plane_state *old_state) -+static void vc4_plane_atomic_disable(struct drm_plane *plane, -+ struct drm_plane_state *old_state) - { -- vc4_plane_set_primary_blank(plane, true); --} -- --static void vc4_cursor_plane_atomic_update(struct drm_plane *plane, -- struct drm_plane_state *old_state) --{ -- struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ //struct vc4_dev *vc4 = to_vc4_dev(plane->dev); - struct drm_plane_state *state = plane->state; -- struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); -- struct drm_framebuffer *fb = state->fb; -- struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -- dma_addr_t addr = bo->paddr + fb->offsets[0]; -- int ret; -- u32 packet_state[] = { -- state->crtc->state->active, -- state->crtc_x, -- state->crtc_y, -- 0 -- }; -- WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); -+ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); - -- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%pad/%d)", -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n", - plane->base.id, plane->name, - state->crtc_w, - state->crtc_h, -+ vc4_plane->mb.plane.vc_image_type, - state->crtc_x, -- state->crtc_y, -- &addr, -- fb->pitches[0]); -- -- /* add on the top/left offsets when overscan is active */ -- if (vc4_crtc) { -- packet_state[1] += vc4_crtc->overscan[0]; -- packet_state[2] += vc4_crtc->overscan[1]; -- } -- -- ret = rpi_firmware_property(vc4->firmware, -- RPI_FIRMWARE_SET_CURSOR_STATE, -- &packet_state, -- sizeof(packet_state)); -- if (ret || packet_state[0] != 0) -- DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); -- -- /* Note: When the cursor contents change, the modesetting -- * driver calls drm_mode_cursor_univeral() with -- * DRM_MODE_CURSOR_BO, which means a new fb will be allocated. -- */ -- if (!old_state || -- state->crtc_w != old_state->crtc_w || -- state->crtc_h != old_state->crtc_h || -- fb != old_state->fb) { -- u32 packet_info[] = { state->crtc_w, state->crtc_h, -- 0, /* unused */ -- addr, -- 0, 0, /* hotx, hoty */}; -- -- ret = rpi_firmware_property(vc4->firmware, -- RPI_FIRMWARE_SET_CURSOR_INFO, -- &packet_info, -- sizeof(packet_info)); -- if (ret || packet_info[0] != 0) -- DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); -- } --} -- --static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, -- struct drm_plane_state *old_state) --{ -- struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -- u32 packet_state[] = { false, 0, 0, 0 }; -- int ret; -- -- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] disabling cursor", plane->base.id, plane->name); -- -- ret = rpi_firmware_property(vc4->firmware, -- RPI_FIRMWARE_SET_CURSOR_STATE, -- &packet_state, -- sizeof(packet_state)); -- if (ret || packet_state[0] != 0) -- DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); -+ state->crtc_y); -+ vc4_plane_set_blank(plane, true); - } - - static int vc4_plane_atomic_check(struct drm_plane *plane, -@@ -301,6 +431,7 @@ static bool vc4_fkms_format_mod_supporte - switch (format) { - case DRM_FORMAT_XRGB8888: - case DRM_FORMAT_ARGB8888: -+ case DRM_FORMAT_RGB565: - switch (modifier) { - case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: - case DRM_FORMAT_MOD_LINEAR: -@@ -309,8 +440,22 @@ static bool vc4_fkms_format_mod_supporte - default: - return false; - } -+ case DRM_FORMAT_NV12: -+ case DRM_FORMAT_NV21: -+ switch (fourcc_mod_broadcom_mod(modifier)) { -+ case DRM_FORMAT_MOD_LINEAR: -+ case DRM_FORMAT_MOD_BROADCOM_SAND128: -+ return true; -+ default: -+ return false; -+ } -+ case DRM_FORMAT_RGB888: -+ case DRM_FORMAT_BGR888: -+ case DRM_FORMAT_YUV422: -+ case DRM_FORMAT_YUV420: -+ case DRM_FORMAT_YVU420: - default: -- return false; -+ return (modifier == DRM_FORMAT_MOD_LINEAR); - } - } - -@@ -325,31 +470,24 @@ static const struct drm_plane_funcs vc4_ - .format_mod_supported = vc4_fkms_format_mod_supported, - }; - --static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { -- .prepare_fb = drm_gem_fb_prepare_fb, -- .cleanup_fb = NULL, -- .atomic_check = vc4_plane_atomic_check, -- .atomic_update = vc4_primary_plane_atomic_update, -- .atomic_disable = vc4_primary_plane_atomic_disable, --}; -- --static const struct drm_plane_helper_funcs vc4_cursor_plane_helper_funcs = { -+static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = { - .prepare_fb = drm_gem_fb_prepare_fb, - .cleanup_fb = NULL, - .atomic_check = vc4_plane_atomic_check, -- .atomic_update = vc4_cursor_plane_atomic_update, -- .atomic_disable = vc4_cursor_plane_atomic_disable, -+ .atomic_update = vc4_plane_atomic_update, -+ .atomic_disable = vc4_plane_atomic_disable, - }; - - static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, -- enum drm_plane_type type) -+ enum drm_plane_type type, -+ u8 plane_id) - { -- /* Primary and cursor planes only */ - struct drm_plane *plane = NULL; - struct vc4_fkms_plane *vc4_plane; -- u32 formats[] = {DRM_FORMAT_ARGB8888, DRM_FORMAT_XRGB8888}; -+ u32 formats[ARRAY_SIZE(vc_image_formats)]; -+ unsigned int default_zpos; -+ u32 num_formats = 0; - int ret = 0; -- bool primary = (type == DRM_PLANE_TYPE_PRIMARY); - static const uint64_t modifiers[] = { - DRM_FORMAT_MOD_LINEAR, - /* VC4_T_TILED should come after linear, because we -@@ -358,6 +496,7 @@ static struct drm_plane *vc4_fkms_plane_ - DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED, - DRM_FORMAT_MOD_INVALID, - }; -+ int i; - - vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), - GFP_KERNEL); -@@ -366,19 +505,48 @@ static struct drm_plane *vc4_fkms_plane_ - goto fail; - } - -+ for (i = 0; i < ARRAY_SIZE(vc_image_formats); i++) -+ formats[num_formats++] = vc_image_formats[i].drm; -+ - plane = &vc4_plane->base; - ret = drm_universal_plane_init(dev, plane, 0xff, - &vc4_plane_funcs, -- formats, primary ? 2 : 1, modifiers, -- type, primary ? "primary" : "cursor"); -+ formats, num_formats, modifiers, -+ type, NULL); - -- if (type == DRM_PLANE_TYPE_PRIMARY) -- drm_plane_helper_add(plane, &vc4_primary_plane_helper_funcs); -- else -- drm_plane_helper_add(plane, &vc4_cursor_plane_helper_funcs); -+ drm_plane_helper_add(plane, &vc4_plane_helper_funcs); - - drm_plane_create_alpha_property(plane); - -+ /* -+ * Default frame buffer setup is with FB on -127, and raspistill etc -+ * tend to drop overlays on layer 2. Cursor plane was on layer +127. -+ * -+ * For F-KMS the mailbox call allows for a s8. -+ * Remap zpos 0 to -127 for the background layer, but leave all the -+ * other layers as requested by KMS. -+ */ -+ switch (type) { -+ case DRM_PLANE_TYPE_PRIMARY: -+ default_zpos = 0; -+ break; -+ case DRM_PLANE_TYPE_OVERLAY: -+ default_zpos = 1; -+ break; -+ case DRM_PLANE_TYPE_CURSOR: -+ default_zpos = 2; -+ break; -+ } -+ drm_plane_create_zpos_property(plane, default_zpos, 0, 127); -+ -+ /* Prepare the static elements of the mailbox structure */ -+ vc4_plane->mb.tag.tag = RPI_FIRMWARE_SET_PLANE; -+ vc4_plane->mb.tag.buf_size = sizeof(struct set_plane); -+ vc4_plane->mb.tag.req_resp_size = 0; -+ vc4_plane->mb.plane.display = 0; -+ vc4_plane->mb.plane.plane_id = plane_id; -+ vc4_plane->mb.plane.layer = default_zpos ? default_zpos : -127; -+ - return plane; - fail: - if (plane) -@@ -400,19 +568,23 @@ static void vc4_crtc_disable(struct drm_ - * whether anything scans out at all, but the firmware doesn't - * give us a CRTC-level control for that. - */ -- vc4_cursor_plane_atomic_disable(crtc->cursor, crtc->cursor->state); -- vc4_plane_set_primary_blank(crtc->primary, true); -+ -+ vc4_plane_atomic_disable(crtc->cursor, crtc->cursor->state); -+ vc4_plane_atomic_disable(crtc->primary, crtc->primary->state); -+ -+ /* FIXME: Disable overlay planes */ - } - - static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { - /* Unblank the planes (if they're supposed to be displayed). */ -+ - if (crtc->primary->state->fb) -- vc4_plane_set_primary_blank(crtc->primary, false); -- if (crtc->cursor->state->fb) { -- vc4_cursor_plane_atomic_update(crtc->cursor, -- crtc->cursor->state); -- } -+ vc4_plane_set_blank(crtc->primary, false); -+ if (crtc->cursor->state->fb) -+ vc4_plane_set_blank(crtc->cursor, crtc->cursor->state); -+ -+ /* FIXME: Enable overlay planes */ - } - - static int vc4_crtc_atomic_check(struct drm_crtc *crtc, -@@ -672,8 +844,10 @@ static int vc4_fkms_bind(struct device * - struct vc4_crtc *vc4_crtc; - struct vc4_fkms_encoder *vc4_encoder; - struct drm_crtc *crtc; -- struct drm_plane *primary_plane, *cursor_plane, *destroy_plane, *temp; -+ struct drm_plane *primary_plane, *overlay_plane, *cursor_plane; -+ struct drm_plane *destroy_plane, *temp; - struct device_node *firmware_node; -+ u32 blank = 1; - int ret; - - vc4->firmware_kms = true; -@@ -702,20 +876,26 @@ static int vc4_fkms_bind(struct device * - if (IS_ERR(vc4_crtc->regs)) - return PTR_ERR(vc4_crtc->regs); - -- /* For now, we create just the primary and the legacy cursor -- * planes. We should be able to stack more planes on easily, -- * but to do that we would need to compute the bandwidth -- * requirement of the plane configuration, and reject ones -- * that will take too much. -- */ -- primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY); -+ /* Blank the firmware provided framebuffer */ -+ rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_FRAMEBUFFER_BLANK, -+ &blank, sizeof(blank)); -+ -+ primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY, 0); - if (IS_ERR(primary_plane)) { - dev_err(dev, "failed to construct primary plane\n"); - ret = PTR_ERR(primary_plane); - goto err; - } - -- cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR); -+ overlay_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_OVERLAY, 1); -+ if (IS_ERR(overlay_plane)) { -+ dev_err(dev, "failed to construct overlay plane\n"); -+ ret = PTR_ERR(overlay_plane); -+ goto err; -+ } -+ -+ cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR, 2); - if (IS_ERR(cursor_plane)) { - dev_err(dev, "failed to construct cursor plane\n"); - ret = PTR_ERR(cursor_plane); ---- a/drivers/gpu/drm/vc4/vc4_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_kms.c -@@ -435,6 +435,7 @@ int vc4_kms_load(struct drm_device *dev) - dev->mode_config.preferred_depth = 24; - dev->mode_config.async_page_flip = true; - dev->mode_config.allow_fb_modifiers = true; -+ dev->mode_config.normalize_zpos = true; - - drm_modeset_lock_init(&vc4->ctm_state_lock); - ---- /dev/null -+++ b/drivers/gpu/drm/vc4/vc_image_types.h -@@ -0,0 +1,143 @@ -+ -+/* -+ * Copyright (c) 2012, Broadcom Europe Ltd -+ * -+ * Values taken from vc_image_types.h released by Broadcom at -+ * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_types.h -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+enum { -+ VC_IMAGE_MIN = 0, //bounds for error checking -+ -+ VC_IMAGE_RGB565 = 1, -+ VC_IMAGE_1BPP, -+ VC_IMAGE_YUV420, -+ VC_IMAGE_48BPP, -+ VC_IMAGE_RGB888, -+ VC_IMAGE_8BPP, -+ /* 4bpp palettised image */ -+ VC_IMAGE_4BPP, -+ /* A separated format of 16 colour/light shorts followed by 16 z -+ * values -+ */ -+ VC_IMAGE_3D32, -+ /* 16 colours followed by 16 z values */ -+ VC_IMAGE_3D32B, -+ /* A separated format of 16 material/colour/light shorts followed by -+ * 16 z values -+ */ -+ VC_IMAGE_3D32MAT, -+ /* 32 bit format containing 18 bits of 6.6.6 RGB, 9 bits per short */ -+ VC_IMAGE_RGB2X9, -+ /* 32-bit format holding 18 bits of 6.6.6 RGB */ -+ VC_IMAGE_RGB666, -+ /* 4bpp palettised image with embedded palette */ -+ VC_IMAGE_PAL4_OBSOLETE, -+ /* 8bpp palettised image with embedded palette */ -+ VC_IMAGE_PAL8_OBSOLETE, -+ /* RGB888 with an alpha byte after each pixel */ -+ VC_IMAGE_RGBA32, -+ /* a line of Y (32-byte padded), a line of U (16-byte padded), and a -+ * line of V (16-byte padded) -+ */ -+ VC_IMAGE_YUV422, -+ /* RGB565 with a transparent patch */ -+ VC_IMAGE_RGBA565, -+ /* Compressed (4444) version of RGBA32 */ -+ VC_IMAGE_RGBA16, -+ /* VCIII codec format */ -+ VC_IMAGE_YUV_UV, -+ /* VCIII T-format RGBA8888 */ -+ VC_IMAGE_TF_RGBA32, -+ /* VCIII T-format RGBx8888 */ -+ VC_IMAGE_TF_RGBX32, -+ /* VCIII T-format float */ -+ VC_IMAGE_TF_FLOAT, -+ /* VCIII T-format RGBA4444 */ -+ VC_IMAGE_TF_RGBA16, -+ /* VCIII T-format RGB5551 */ -+ VC_IMAGE_TF_RGBA5551, -+ /* VCIII T-format RGB565 */ -+ VC_IMAGE_TF_RGB565, -+ /* VCIII T-format 8-bit luma and 8-bit alpha */ -+ VC_IMAGE_TF_YA88, -+ /* VCIII T-format 8 bit generic sample */ -+ VC_IMAGE_TF_BYTE, -+ /* VCIII T-format 8-bit palette */ -+ VC_IMAGE_TF_PAL8, -+ /* VCIII T-format 4-bit palette */ -+ VC_IMAGE_TF_PAL4, -+ /* VCIII T-format Ericsson Texture Compressed */ -+ VC_IMAGE_TF_ETC1, -+ /* RGB888 with R & B swapped */ -+ VC_IMAGE_BGR888, -+ /* RGB888 with R & B swapped, but with no pitch, i.e. no padding after -+ * each row of pixels -+ */ -+ VC_IMAGE_BGR888_NP, -+ /* Bayer image, extra defines which variant is being used */ -+ VC_IMAGE_BAYER, -+ /* General wrapper for codec images e.g. JPEG from camera */ -+ VC_IMAGE_CODEC, -+ /* VCIII codec format */ -+ VC_IMAGE_YUV_UV32, -+ /* VCIII T-format 8-bit luma */ -+ VC_IMAGE_TF_Y8, -+ /* VCIII T-format 8-bit alpha */ -+ VC_IMAGE_TF_A8, -+ /* VCIII T-format 16-bit generic sample */ -+ VC_IMAGE_TF_SHORT, -+ /* VCIII T-format 1bpp black/white */ -+ VC_IMAGE_TF_1BPP, -+ VC_IMAGE_OPENGL, -+ /* VCIII-B0 HVS YUV 4:4:4 interleaved samples */ -+ VC_IMAGE_YUV444I, -+ /* Y, U, & V planes separately (VC_IMAGE_YUV422 has them interleaved on -+ * a per line basis) -+ */ -+ VC_IMAGE_YUV422PLANAR, -+ /* 32bpp with 8bit alpha at MS byte, with R, G, B (LS byte) */ -+ VC_IMAGE_ARGB8888, -+ /* 32bpp with 8bit unused at MS byte, with R, G, B (LS byte) */ -+ VC_IMAGE_XRGB8888, -+ -+ /* interleaved 8 bit samples of Y, U, Y, V (4 flavours) */ -+ VC_IMAGE_YUV422YUYV, -+ VC_IMAGE_YUV422YVYU, -+ VC_IMAGE_YUV422UYVY, -+ VC_IMAGE_YUV422VYUY, -+ -+ /* 32bpp like RGBA32 but with unused alpha */ -+ VC_IMAGE_RGBX32, -+ /* 32bpp, corresponding to RGBA with unused alpha */ -+ VC_IMAGE_RGBX8888, -+ /* 32bpp, corresponding to BGRA with unused alpha */ -+ VC_IMAGE_BGRX8888, -+ -+ /* Y as a plane, then UV byte interleaved in plane with with same pitch, -+ * half height -+ */ -+ VC_IMAGE_YUV420SP, -+ -+ /* Y, U, & V planes separately 4:4:4 */ -+ VC_IMAGE_YUV444PLANAR, -+ -+ /* T-format 8-bit U - same as TF_Y8 buf from U plane */ -+ VC_IMAGE_TF_U8, -+ /* T-format 8-bit U - same as TF_Y8 buf from V plane */ -+ VC_IMAGE_TF_V8, -+ -+ /* YUV4:2:0 planar, 16bit values */ -+ VC_IMAGE_YUV420_16, -+ /* YUV4:2:0 codec format, 16bit values */ -+ VC_IMAGE_YUV_UV_16, -+ /* YUV4:2:0 with U,V in side-by-side format */ -+ VC_IMAGE_YUV420_S, -+ -+ VC_IMAGE_MAX, /* bounds for error checking */ -+ VC_IMAGE_FORCE_ENUM_16BIT = 0xffff, -+}; ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -148,6 +148,8 @@ enum rpi_firmware_property_tag { - - RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, - -+ RPI_FIRMWARE_SET_PLANE = 0x00048015, -+ - RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, - RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0593-bcm2835-dma-Add-proper-40-bit-DMA-support.patch b/target/linux/brcm2708/patches-4.19/950-0593-bcm2835-dma-Add-proper-40-bit-DMA-support.patch new file mode 100644 index 0000000000..7ca14c805e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0593-bcm2835-dma-Add-proper-40-bit-DMA-support.patch @@ -0,0 +1,1018 @@ +From 621fb1606217c3e72feda69255ae6cb6a7ccfec2 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 4 Apr 2019 13:33:47 +0100 +Subject: [PATCH] bcm2835-dma: Add proper 40-bit DMA support + +The 40-bit additions are not fully tested, but it should be +capable of supporting both 40-bit memcpy on BCM2711 and regular +Lite channels on BCM2835. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2838.dtsi | 33 +- + drivers/dma/bcm2835-dma.c | 426 ++++++++++++++----- + drivers/pci/controller/pcie-brcmstb-bounce.c | 30 +- + drivers/pci/controller/pcie-brcmstb-bounce.h | 21 +- + drivers/pci/controller/pcie-brcmstb.c | 23 +- + 5 files changed, 395 insertions(+), 138 deletions(-) + +--- a/arch/arm/boot/dts/bcm2838.dtsi ++++ b/arch/arm/boot/dts/bcm2838.dtsi +@@ -372,6 +372,23 @@ + }; + }; + ++ dma40: dma@7e007b00 { ++ compatible = "brcm,bcm2838-dma"; ++ reg = <0x0 0x7e007b00 0x400>; ++ interrupts = ++ , /* dma4 11 */ ++ , /* dma4 12 */ ++ , /* dma4 13 */ ++ ; /* dma4 14 */ ++ interrupt-names = "dma11", ++ "dma12", ++ "dma13", ++ "dma14"; ++ #dma-cells = <1>; ++ brcm,dma-channel-mask = <0x7000>; ++ }; ++ /* DMA4 - 40 bit DMA engines */ ++ + xhci: xhci@7e9c0000 { + compatible = "generic-xhci"; + status = "disabled"; +@@ -689,6 +706,7 @@ + }; + + &dma { ++ reg = <0x7e007000 0xb00>; + interrupts = , + , + , +@@ -699,12 +717,7 @@ + , /* dmalite 7 */ + , /* dmalite 8 */ + , /* dmalite 9 */ +- , /* dmalite 10 */ +- /* DMA4 - 40 bit DMA engines */ +- , /* dma4 11 */ +- , /* dma4 12 */ +- , /* dma4 13 */ +- ; /* dma4 14 */ ++ ; /* dmalite 10 */ + interrupt-names = "dma0", + "dma1", + "dma2", +@@ -715,10 +728,6 @@ + "dma7", + "dma8", + "dma9", +- "dma10", +- "dma11", +- "dma12", +- "dma13", +- "dma14"; +- brcm,dma-channel-mask = <0x7ef5>; ++ "dma10"; ++ brcm,dma-channel-mask = <0x01f5>; + }; +--- a/drivers/dma/bcm2835-dma.c ++++ b/drivers/dma/bcm2835-dma.c +@@ -50,12 +50,18 @@ + #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14 + #define BCM2835_DMA_CHAN_NAME_SIZE 8 + #define BCM2835_DMA_BULK_MASK BIT(0) ++#define BCM2838_DMA_MEMCPY_CHAN 14 ++ ++struct bcm2835_dma_cfg_data { ++ u32 chan_40bit_mask; ++}; + + struct bcm2835_dmadev { + struct dma_device ddev; + spinlock_t lock; + void __iomem *base; + struct device_dma_parameters dma_parms; ++ const struct bcm2835_dma_cfg_data *cfg_data; + }; + + struct bcm2835_dma_cb { +@@ -100,6 +106,7 @@ struct bcm2835_chan { + unsigned int irq_flags; + + bool is_lite_channel; ++ bool is_40bit_channel; + }; + + struct bcm2835_desc { +@@ -189,7 +196,8 @@ struct bcm2835_desc { + #define BCM2835_DMA_DATA_TYPE_S128 16 + + /* Valid only for channels 0 - 14, 15 has its own base address */ +-#define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */ ++#define BCM2835_DMA_CHAN_SIZE 0x100 ++#define BCM2835_DMA_CHAN(n) ((n) * BCM2835_DMA_CHAN_SIZE) /* Base address */ + #define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n)) + + /* the max dma length for different channels */ +@@ -200,7 +208,7 @@ struct bcm2835_desc { + #define BCM2838_DMA40_CS 0x00 + #define BCM2838_DMA40_CB 0x04 + #define BCM2838_DMA40_DEBUG 0x0c +-#define BCM2858_DMA40_TI 0x10 ++#define BCM2838_DMA40_TI 0x10 + #define BCM2838_DMA40_SRC 0x14 + #define BCM2838_DMA40_SRCI 0x18 + #define BCM2838_DMA40_DEST 0x1c +@@ -209,32 +217,97 @@ struct bcm2835_desc { + #define BCM2838_DMA40_NEXT_CB 0x28 + #define BCM2838_DMA40_DEBUG2 0x2c + +-#define BCM2838_DMA40_CS_ACTIVE BIT(0) +-#define BCM2838_DMA40_CS_END BIT(1) ++#define BCM2838_DMA40_ACTIVE BIT(0) ++#define BCM2838_DMA40_END BIT(1) ++#define BCM2838_DMA40_INT BIT(2) ++#define BCM2838_DMA40_DREQ BIT(3) /* DREQ state */ ++#define BCM2838_DMA40_RD_PAUSED BIT(4) /* Reading is paused */ ++#define BCM2838_DMA40_WR_PAUSED BIT(5) /* Writing is paused */ ++#define BCM2838_DMA40_DREQ_PAUSED BIT(6) /* Is paused by DREQ flow control */ ++#define BCM2838_DMA40_WAITING_FOR_WRITES BIT(7) /* Waiting for last write */ ++#define BCM2838_DMA40_ERR BIT(10) ++#define BCM2838_DMA40_QOS(x) (((x) & 0x1f) << 16) ++#define BCM2838_DMA40_PANIC_QOS(x) (((x) & 0x1f) << 20) ++#define BCM2838_DMA40_WAIT_FOR_WRITES BIT(28) ++#define BCM2838_DMA40_DISDEBUG BIT(29) ++#define BCM2838_DMA40_ABORT BIT(30) ++#define BCM2838_DMA40_HALT BIT(31) ++#define BCM2838_DMA40_CS_FLAGS(x) (x & (BCM2838_DMA40_QOS(15) | \ ++ BCM2838_DMA40_PANIC_QOS(15) | \ ++ BCM2838_DMA40_WAIT_FOR_WRITES | \ ++ BCM2838_DMA40_DISDEBUG)) ++ ++/* Transfer information bits */ ++#define BCM2838_DMA40_INTEN BIT(0) ++#define BCM2838_DMA40_TDMODE BIT(1) /* 2D-Mode */ ++#define BCM2838_DMA40_WAIT_RESP BIT(2) /* wait for AXI write to be acked */ ++#define BCM2838_DMA40_WAIT_RD_RESP BIT(3) /* wait for AXI read to complete */ ++#define BCM2838_DMA40_PER_MAP(x) ((x & 31) << 9) /* REQ source */ ++#define BCM2838_DMA40_S_DREQ BIT(14) /* enable SREQ for source */ ++#define BCM2838_DMA40_D_DREQ BIT(15) /* enable DREQ for destination */ ++#define BCM2838_DMA40_S_WAIT(x) ((x & 0xff) << 16) /* add DMA read-wait cycles */ ++#define BCM2838_DMA40_D_WAIT(x) ((x & 0xff) << 24) /* add DMA write-wait cycles */ + +-#define BCM2838_DMA40_CS_QOS(x) (((x) & 0x1f) << 16) +-#define BCM2838_DMA40_CS_PANIC_QOS(x) (((x) & 0x1f) << 20) +-#define BCM2838_DMA40_CS_WRITE_WAIT BIT(28) ++/* debug register bits */ ++#define BCM2838_DMA40_DEBUG_WRITE_ERR BIT(0) ++#define BCM2838_DMA40_DEBUG_FIFO_ERR BIT(1) ++#define BCM2838_DMA40_DEBUG_READ_ERR BIT(2) ++#define BCM2838_DMA40_DEBUG_READ_CB_ERR BIT(3) ++#define BCM2838_DMA40_DEBUG_IN_ON_ERR BIT(8) ++#define BCM2838_DMA40_DEBUG_ABORT_ON_ERR BIT(9) ++#define BCM2838_DMA40_DEBUG_HALT_ON_ERR BIT(10) ++#define BCM2838_DMA40_DEBUG_DISABLE_CLK_GATE BIT(11) ++#define BCM2838_DMA40_DEBUG_RSTATE_SHIFT 14 ++#define BCM2838_DMA40_DEBUG_RSTATE_BITS 4 ++#define BCM2838_DMA40_DEBUG_WSTATE_SHIFT 18 ++#define BCM2838_DMA40_DEBUG_WSTATE_BITS 4 ++#define BCM2838_DMA40_DEBUG_RESET BIT(23) ++#define BCM2838_DMA40_DEBUG_ID_SHIFT 24 ++#define BCM2838_DMA40_DEBUG_ID_BITS 4 ++#define BCM2838_DMA40_DEBUG_VERSION_SHIFT 28 ++#define BCM2838_DMA40_DEBUG_VERSION_BITS 4 ++ ++/* Valid only for channels 0 - 3 (11 - 14) */ ++#define BCM2838_DMA40_CHAN(n) (((n) + 11) << 8) /* Base address */ ++#define BCM2838_DMA40_CHANIO(base, n) ((base) + BCM2838_DMA_CHAN(n)) + +-#define BCM2838_DMA40_BURST_LEN(x) ((((x) - 1) & 0xf) << 8) +-#define BCM2838_DMA40_INC BIT(12) +-#define BCM2838_DMA40_SIZE_128 (2 << 13) ++/* the max dma length for different channels */ ++#define MAX_DMA40_LEN SZ_1G + +-#define BCM2838_DMA40_MEMCPY_QOS \ +- (BCM2838_DMA40_CS_QOS(0x0) | \ +- BCM2838_DMA40_CS_PANIC_QOS(0x0) | \ +- BCM2838_DMA40_CS_WRITE_WAIT) ++#define BCM2838_DMA40_BURST_LEN(x) ((min(x,16) - 1) << 8) ++#define BCM2838_DMA40_INC BIT(12) ++#define BCM2838_DMA40_SIZE_32 (0 << 13) ++#define BCM2838_DMA40_SIZE_64 (1 << 13) ++#define BCM2838_DMA40_SIZE_128 (2 << 13) ++#define BCM2838_DMA40_SIZE_256 (3 << 13) ++#define BCM2838_DMA40_IGNORE BIT(15) ++#define BCM2838_DMA40_STRIDE(x) ((x) << 16) /* For 2D mode */ ++ ++#define BCM2838_DMA40_MEMCPY_FLAGS \ ++ (BCM2838_DMA40_QOS(0) | \ ++ BCM2838_DMA40_PANIC_QOS(0) | \ ++ BCM2838_DMA40_WAIT_FOR_WRITES | \ ++ BCM2838_DMA40_DISDEBUG) + + #define BCM2838_DMA40_MEMCPY_XFER_INFO \ + (BCM2838_DMA40_SIZE_128 | \ + BCM2838_DMA40_INC | \ + BCM2838_DMA40_BURST_LEN(16)) + ++struct bcm2835_dmadev *memcpy_parent; + static void __iomem *memcpy_chan; + static struct bcm2838_dma40_scb *memcpy_scb; + static dma_addr_t memcpy_scb_dma; + DEFINE_SPINLOCK(memcpy_lock); + ++static const struct bcm2835_dma_cfg_data bcm2835_dma_cfg = { ++ .chan_40bit_mask = 0, ++}; ++ ++static const struct bcm2835_dma_cfg_data bcm2838_dma_cfg = { ++ .chan_40bit_mask = BIT(11) | BIT(12) | BIT(13) | BIT(14), ++}; ++ + static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c) + { + /* lite and normal channels have different max frame length */ +@@ -264,6 +337,32 @@ static inline struct bcm2835_desc *to_bc + return container_of(t, struct bcm2835_desc, vd.tx); + } + ++static inline uint32_t to_bcm2838_ti(uint32_t info) ++{ ++ return ((info & BCM2835_DMA_INT_EN) ? BCM2838_DMA40_INTEN : 0) | ++ ((info & BCM2835_DMA_WAIT_RESP) ? BCM2838_DMA40_WAIT_RESP : 0) | ++ ((info & BCM2835_DMA_S_DREQ) ? ++ (BCM2838_DMA40_S_DREQ | BCM2838_DMA40_WAIT_RD_RESP) : 0) | ++ ((info & BCM2835_DMA_D_DREQ) ? BCM2838_DMA40_D_DREQ : 0) | ++ BCM2838_DMA40_PER_MAP((info >> 16) & 0x1f); ++} ++ ++static inline uint32_t to_bcm2838_srci(uint32_t info) ++{ ++ return ((info & BCM2835_DMA_S_INC) ? BCM2838_DMA40_INC : 0); ++} ++ ++static inline uint32_t to_bcm2838_dsti(uint32_t info) ++{ ++ return ((info & BCM2835_DMA_D_INC) ? BCM2838_DMA40_INC : 0); ++} ++ ++static inline uint32_t to_bcm2838_cbaddr(dma_addr_t addr) ++{ ++ BUG_ON(addr & 0x1f); ++ return (addr >> 5); ++} ++ + static void bcm2835_dma_free_cb_chain(struct bcm2835_desc *desc) + { + size_t i; +@@ -282,45 +381,53 @@ static void bcm2835_dma_desc_free(struct + } + + static void bcm2835_dma_create_cb_set_length( +- struct bcm2835_chan *chan, ++ struct bcm2835_chan *c, + struct bcm2835_dma_cb *control_block, + size_t len, + size_t period_len, + size_t *total_len, + u32 finalextrainfo) + { +- size_t max_len = bcm2835_dma_max_frame_length(chan); ++ size_t max_len = bcm2835_dma_max_frame_length(c); ++ uint32_t cb_len; + + /* set the length taking lite-channel limitations into account */ +- control_block->length = min_t(u32, len, max_len); ++ cb_len = min_t(u32, len, max_len); + +- /* finished if we have no period_length */ +- if (!period_len) +- return; ++ if (period_len) { ++ /* ++ * period_len means: that we need to generate ++ * transfers that are terminating at every ++ * multiple of period_len - this is typically ++ * used to set the interrupt flag in info ++ * which is required during cyclic transfers ++ */ + +- /* +- * period_len means: that we need to generate +- * transfers that are terminating at every +- * multiple of period_len - this is typically +- * used to set the interrupt flag in info +- * which is required during cyclic transfers +- */ ++ /* have we filled in period_length yet? */ ++ if (*total_len + cb_len < period_len) { ++ /* update number of bytes in this period so far */ ++ *total_len += cb_len; ++ } else { ++ /* calculate the length that remains to reach period_len */ ++ cb_len = period_len - *total_len; + +- /* have we filled in period_length yet? */ +- if (*total_len + control_block->length < period_len) { +- /* update number of bytes in this period so far */ +- *total_len += control_block->length; +- return; ++ /* reset total_length for next period */ ++ *total_len = 0; ++ } + } + +- /* calculate the length that remains to reach period_length */ +- control_block->length = period_len - *total_len; +- +- /* reset total_length for next period */ +- *total_len = 0; +- +- /* add extrainfo bits in info */ +- control_block->info |= finalextrainfo; ++ if (c->is_40bit_channel) { ++ struct bcm2838_dma40_scb *scb = ++ (struct bcm2838_dma40_scb *)control_block; ++ ++ scb->len = cb_len; ++ /* add extrainfo bits to ti */ ++ scb->ti |= to_bcm2838_ti(finalextrainfo); ++ } else { ++ control_block->length = cb_len; ++ /* add extrainfo bits to info */ ++ control_block->info |= finalextrainfo; ++ } + } + + static inline size_t bcm2835_dma_count_frames_for_sg( +@@ -343,7 +450,7 @@ static inline size_t bcm2835_dma_count_f + /** + * bcm2835_dma_create_cb_chain - create a control block and fills data in + * +- * @chan: the @dma_chan for which we run this ++ * @c: the @bcm2835_chan for which we run this + * @direction: the direction in which we transfer + * @cyclic: it is a cyclic transfer + * @info: the default info bits to apply per controlblock +@@ -361,12 +468,11 @@ static inline size_t bcm2835_dma_count_f + * @gfp: the GFP flag to use for allocation + */ + static struct bcm2835_desc *bcm2835_dma_create_cb_chain( +- struct dma_chan *chan, enum dma_transfer_direction direction, ++ struct bcm2835_chan *c, enum dma_transfer_direction direction, + bool cyclic, u32 info, u32 finalextrainfo, size_t frames, + dma_addr_t src, dma_addr_t dst, size_t buf_len, + size_t period_len, gfp_t gfp) + { +- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + size_t len = buf_len, total_len; + size_t frame; + struct bcm2835_desc *d; +@@ -399,11 +505,23 @@ static struct bcm2835_desc *bcm2835_dma_ + + /* fill in the control block */ + control_block = cb_entry->cb; +- control_block->info = info; +- control_block->src = src; +- control_block->dst = dst; +- control_block->stride = 0; +- control_block->next = 0; ++ if (c->is_40bit_channel) { ++ struct bcm2838_dma40_scb *scb = ++ (struct bcm2838_dma40_scb *)control_block; ++ scb->ti = to_bcm2838_ti(info); ++ scb->src = lower_32_bits(src); ++ scb->srci= upper_32_bits(src) | to_bcm2838_srci(info); ++ scb->dst = lower_32_bits(dst); ++ scb->dsti = upper_32_bits(dst) | to_bcm2838_dsti(info); ++ scb->next_cb = 0; ++ } else { ++ control_block->info = info; ++ control_block->src = src; ++ control_block->dst = dst; ++ control_block->stride = 0; ++ control_block->next = 0; ++ } ++ + /* set up length in control_block if requested */ + if (buf_len) { + /* calculate length honoring period_length */ +@@ -417,7 +535,10 @@ static struct bcm2835_desc *bcm2835_dma_ + } + + /* link this the last controlblock */ +- if (frame) ++ if (frame && c->is_40bit_channel) ++ d->cb_list[frame - 1].cb->next = ++ to_bcm2838_cbaddr(cb_entry->paddr); ++ if (frame && !c->is_40bit_channel) + d->cb_list[frame - 1].cb->next = cb_entry->paddr; + + /* update src and dst and length */ +@@ -431,7 +552,14 @@ static struct bcm2835_desc *bcm2835_dma_ + } + + /* the last frame requires extra flags */ +- d->cb_list[d->frames - 1].cb->info |= finalextrainfo; ++ if (c->is_40bit_channel) { ++ struct bcm2838_dma40_scb *scb = ++ (struct bcm2838_dma40_scb *)d->cb_list[d->frames-1].cb; ++ ++ scb->ti |= to_bcm2838_ti(finalextrainfo); ++ } else { ++ d->cb_list[d->frames - 1].cb->info |= finalextrainfo; ++ } + + /* detect a size missmatch */ + if (buf_len && (d->size != buf_len)) +@@ -445,28 +573,51 @@ error_cb: + } + + static void bcm2835_dma_fill_cb_chain_with_sg( +- struct dma_chan *chan, ++ struct bcm2835_chan *c, + enum dma_transfer_direction direction, + struct bcm2835_cb_entry *cb, + struct scatterlist *sgl, + unsigned int sg_len) + { +- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + size_t len, max_len; + unsigned int i; + dma_addr_t addr; + struct scatterlist *sgent; + ++ pr_err("dma_fill_chain_with_sg(ch %d, dir %d):\n", c->ch, direction); ++ + max_len = bcm2835_dma_max_frame_length(c); + for_each_sg(sgl, sgent, sg_len, i) { +- for (addr = sg_dma_address(sgent), len = sg_dma_len(sgent); +- len > 0; +- addr += cb->cb->length, len -= cb->cb->length, cb++) { +- if (direction == DMA_DEV_TO_MEM) +- cb->cb->dst = addr; +- else +- cb->cb->src = addr; +- cb->cb->length = min(len, max_len); ++ if (c->is_40bit_channel) { ++ struct bcm2838_dma40_scb *scb = ++ (struct bcm2838_dma40_scb *)cb->cb; ++ for (addr = sg_dma_address(sgent), ++ len = sg_dma_len(sgent); ++ len > 0; ++ addr += scb->len, len -= scb->len, scb++) { ++ if (direction == DMA_DEV_TO_MEM) { ++ scb->dst = lower_32_bits(addr); ++ scb->dsti = upper_32_bits(addr) | BCM2838_DMA40_INC; ++ } else { ++ scb->src = lower_32_bits(addr); ++ scb->srci = upper_32_bits(addr) | BCM2838_DMA40_INC; ++ } ++ scb->len = min(len, max_len); ++ pr_err(" %llx, %x\n", (u64)addr, scb->len); ++ } ++ } else { ++ for (addr = sg_dma_address(sgent), ++ len = sg_dma_len(sgent); ++ len > 0; ++ addr += cb->cb->length, len -= cb->cb->length, ++ cb++) { ++ if (direction == DMA_DEV_TO_MEM) ++ cb->cb->dst = addr; ++ else ++ cb->cb->src = addr; ++ cb->cb->length = min(len, max_len); ++ pr_err(" %llx, %x\n", (u64)addr, cb->cb->length); ++ } + } + } + } +@@ -475,6 +626,10 @@ static int bcm2835_dma_abort(struct bcm2 + { + void __iomem *chan_base = c->chan_base; + long int timeout = 10000; ++ u32 wait_mask = BCM2835_DMA_WAITING_FOR_WRITES; ++ ++ if (c->is_40bit_channel) ++ wait_mask = BCM2838_DMA40_WAITING_FOR_WRITES; + + /* + * A zero control block address means the channel is idle. +@@ -487,8 +642,7 @@ static int bcm2835_dma_abort(struct bcm2 + writel(0, chan_base + BCM2835_DMA_CS); + + /* Wait for any current AXI transfer to complete */ +- while ((readl(chan_base + BCM2835_DMA_CS) & +- BCM2835_DMA_WAITING_FOR_WRITES) && --timeout) ++ while ((readl(chan_base + BCM2835_DMA_CS) & wait_mask) && --timeout) + cpu_relax(); + + /* Peripheral might be stuck and fail to signal AXI write responses */ +@@ -505,6 +659,7 @@ static void bcm2835_dma_start_desc(struc + struct virt_dma_desc *vd = vchan_next_desc(&c->vc); + struct bcm2835_desc *d; + ++ pr_err("dma_start_desc(%px)\n", vd); + if (!vd) { + c->desc = NULL; + return; +@@ -514,9 +669,16 @@ static void bcm2835_dma_start_desc(struc + + c->desc = d = to_bcm2835_dma_desc(&vd->tx); + +- writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); +- writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq), +- c->chan_base + BCM2835_DMA_CS); ++ if (c->is_40bit_channel) { ++ writel(to_bcm2838_cbaddr(d->cb_list[0].paddr), ++ c->chan_base + BCM2838_DMA40_CB); ++ writel(BCM2838_DMA40_ACTIVE | BCM2838_DMA40_CS_FLAGS(c->dreq), ++ c->chan_base + BCM2838_DMA40_CS); ++ } else { ++ writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); ++ writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq), ++ c->chan_base + BCM2835_DMA_CS); ++ } + } + + static irqreturn_t bcm2835_dma_callback(int irq, void *data) +@@ -544,7 +706,8 @@ static irqreturn_t bcm2835_dma_callback( + * will remain idle despite the ACTIVE flag being set. + */ + writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE | +- BCM2835_DMA_CS_FLAGS(c->dreq), ++ (c->is_40bit_channel ? BCM2838_DMA40_CS_FLAGS(c->dreq) : ++ BCM2835_DMA_CS_FLAGS(c->dreq)), + c->chan_base + BCM2835_DMA_CS); + + d = c->desc; +@@ -643,9 +806,17 @@ static enum dma_status bcm2835_dma_tx_st + struct bcm2835_desc *d = c->desc; + dma_addr_t pos; + +- if (d->dir == DMA_MEM_TO_DEV) ++ if (d->dir == DMA_MEM_TO_DEV && c->is_40bit_channel) ++ pos = readl(c->chan_base + BCM2838_DMA40_SRC) + ++ ((readl(c->chan_base + BCM2838_DMA40_SRCI) & ++ 0xff) << 8); ++ else if (d->dir == DMA_MEM_TO_DEV && !c->is_40bit_channel) + pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD); +- else if (d->dir == DMA_DEV_TO_MEM) ++ else if (d->dir == DMA_DEV_TO_MEM && c->is_40bit_channel) ++ pos = readl(c->chan_base + BCM2838_DMA40_DEST) + ++ ((readl(c->chan_base + BCM2838_DMA40_DESTI) & ++ 0xff) << 8); ++ else if (d->dir == DMA_DEV_TO_MEM && !c->is_40bit_channel) + pos = readl(c->chan_base + BCM2835_DMA_DEST_AD); + else + pos = 0; +@@ -691,7 +862,7 @@ static struct dma_async_tx_descriptor *b + frames = bcm2835_dma_frames_for_length(len, max_len); + + /* allocate the CB chain - this also fills in the pointers */ +- d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false, ++ d = bcm2835_dma_create_cb_chain(c, DMA_MEM_TO_MEM, false, + info, extra, frames, + src, dst, len, 0, GFP_KERNEL); + if (!d) +@@ -726,11 +897,21 @@ static struct dma_async_tx_descriptor *b + if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) + return NULL; + src = c->cfg.src_addr; ++ /* ++ * One would think it ought to be possible to get the physical ++ * to dma address mapping information from the dma-ranges DT ++ * property, but I've not found a way yet that doesn't involve ++ * open-coding the whole thing. ++ */ ++ if (c->is_40bit_channel) ++ src |= 0x400000000ull; + info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC; + } else { + if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) + return NULL; + dst = c->cfg.dst_addr; ++ if (c->is_40bit_channel) ++ dst |= 0x400000000ull; + info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC; + } + +@@ -738,7 +919,7 @@ static struct dma_async_tx_descriptor *b + frames = bcm2835_dma_count_frames_for_sg(c, sgl, sg_len); + + /* allocate the CB chain */ +- d = bcm2835_dma_create_cb_chain(chan, direction, false, ++ d = bcm2835_dma_create_cb_chain(c, direction, false, + info, extra, + frames, src, dst, 0, 0, + GFP_KERNEL); +@@ -746,7 +927,7 @@ static struct dma_async_tx_descriptor *b + return NULL; + + /* fill in frames with scatterlist pointers */ +- bcm2835_dma_fill_cb_chain_with_sg(chan, direction, d->cb_list, ++ bcm2835_dma_fill_cb_chain_with_sg(c, direction, d->cb_list, + sgl, sg_len); + + return vchan_tx_prep(&c->vc, &d->vd, flags); +@@ -815,7 +996,7 @@ static struct dma_async_tx_descriptor *b + * note that we need to use GFP_NOWAIT, as the ALSA i2s dmaengine + * implementation calls prep_dma_cyclic with interrupts disabled. + */ +- d = bcm2835_dma_create_cb_chain(chan, direction, true, ++ d = bcm2835_dma_create_cb_chain(c, direction, true, + info, extra, + frames, src, dst, buf_len, + period_len, GFP_NOWAIT); +@@ -823,7 +1004,8 @@ static struct dma_async_tx_descriptor *b + return NULL; + + /* wrap around into a loop */ +- d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr; ++ d->cb_list[d->frames - 1].cb->next = c->is_40bit_channel ? ++ to_bcm2838_cbaddr(d->cb_list[0].paddr) : d->cb_list[0].paddr; + + return vchan_tx_prep(&c->vc, &d->vd, flags); + } +@@ -899,9 +1081,11 @@ static int bcm2835_dma_chan_init(struct + c->irq_number = irq; + c->irq_flags = irq_flags; + +- /* check in DEBUG register if this is a LITE channel */ +- if (readl(c->chan_base + BCM2835_DMA_DEBUG) & +- BCM2835_DMA_DEBUG_LITE) ++ /* check for 40bit and lite channels */ ++ if (d->cfg_data->chan_40bit_mask & BIT(chan_id)) ++ c->is_40bit_channel = true; ++ else if (readl(c->chan_base + BCM2835_DMA_DEBUG) & ++ BCM2835_DMA_DEBUG_LITE) + c->is_lite_channel = true; + + return 0; +@@ -918,18 +1102,16 @@ static void bcm2835_dma_free(struct bcm2 + } + } + +-int bcm2838_dma40_memcpy_init(struct device *dev) ++int bcm2838_dma40_memcpy_init(void) + { +- if (memcpy_scb) +- return 0; ++ if (!memcpy_parent) ++ return -EPROBE_DEFER; + +- memcpy_scb = dma_alloc_coherent(dev, sizeof(*memcpy_scb), +- &memcpy_scb_dma, GFP_KERNEL); ++ if (!memcpy_chan) ++ return -EINVAL; + +- if (!memcpy_scb) { +- pr_err("bcm2838_dma40_memcpy_init failed!\n"); ++ if (!memcpy_scb) + return -ENOMEM; +- } + + return 0; + } +@@ -956,20 +1138,22 @@ void bcm2838_dma40_memcpy(dma_addr_t dst + scb->next_cb = 0; + + writel((u32)(memcpy_scb_dma >> 5), memcpy_chan + BCM2838_DMA40_CB); +- writel(BCM2838_DMA40_MEMCPY_QOS + BCM2838_DMA40_CS_ACTIVE, ++ writel(BCM2838_DMA40_MEMCPY_FLAGS + BCM2838_DMA40_ACTIVE, + memcpy_chan + BCM2838_DMA40_CS); ++ + /* Poll for completion */ +- while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_CS_END)) ++ while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_END)) + cpu_relax(); + +- writel(BCM2838_DMA40_CS_END, memcpy_chan + BCM2838_DMA40_CS); ++ writel(BCM2838_DMA40_END, memcpy_chan + BCM2838_DMA40_CS); + + spin_unlock_irqrestore(&memcpy_lock, flags); + } + EXPORT_SYMBOL(bcm2838_dma40_memcpy); + + static const struct of_device_id bcm2835_dma_of_match[] = { +- { .compatible = "brcm,bcm2835-dma", }, ++ { .compatible = "brcm,bcm2835-dma", .data = &bcm2835_dma_cfg }, ++ { .compatible = "brcm,bcm2838-dma", .data = &bcm2838_dma_cfg }, + {}, + }; + MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match); +@@ -1001,6 +1185,8 @@ static int bcm2835_dma_probe(struct plat + int irq_flags; + uint32_t chans_available; + char chan_name[BCM2835_DMA_CHAN_NAME_SIZE]; ++ const struct of_device_id *of_id; ++ int chan_count, chan_start, chan_end; + + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; +@@ -1022,9 +1208,13 @@ static int bcm2835_dma_probe(struct plat + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); +- rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK); +- if (rc) +- dev_err(&pdev->dev, "Failed to initialize the legacy API\n"); ++ ++ /* The set of channels can be split across multiple instances. */ ++ chan_start = ((u32)base / BCM2835_DMA_CHAN_SIZE) & 0xf; ++ base -= BCM2835_DMA_CHAN(chan_start); ++ chan_count = resource_size(res) / BCM2835_DMA_CHAN_SIZE; ++ chan_end = min(chan_start + chan_count, ++ BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED + 1); + + od->base = base; + +@@ -1054,6 +1244,14 @@ static int bcm2835_dma_probe(struct plat + + platform_set_drvdata(pdev, od); + ++ of_id = of_match_node(bcm2835_dma_of_match, pdev->dev.of_node); ++ if (!of_id) { ++ dev_err(&pdev->dev, "Failed to match compatible string\n"); ++ return -EINVAL; ++ } ++ ++ od->cfg_data = of_id->data; ++ + /* Request DMA channel mask from device tree */ + if (of_property_read_u32(pdev->dev.of_node, + "brcm,dma-channel-mask", +@@ -1063,18 +1261,34 @@ static int bcm2835_dma_probe(struct plat + goto err_no_dma; + } + +- /* Channel 0 is used by the legacy API */ +- chans_available &= ~BCM2835_DMA_BULK_MASK; ++ /* One channel is reserved for the legacy API */ ++ if (chans_available & BCM2835_DMA_BULK_MASK) { ++ rc = bcm_dmaman_probe(pdev, base, ++ chans_available & BCM2835_DMA_BULK_MASK); ++ if (rc) ++ dev_err(&pdev->dev, ++ "Failed to initialize the legacy API\n"); ++ ++ chans_available &= ~BCM2835_DMA_BULK_MASK; ++ } + +- /* We can't use channels 11-13 yet */ +- chans_available &= ~(BIT(11) | BIT(12) | BIT(13)); ++ /* And possibly one for the 40-bit DMA memcpy API */ ++ if (chans_available & od->cfg_data->chan_40bit_mask & ++ BIT(BCM2838_DMA_MEMCPY_CHAN)) { ++ memcpy_parent = od; ++ memcpy_chan = BCM2835_DMA_CHANIO(base, BCM2838_DMA_MEMCPY_CHAN); ++ memcpy_scb = dma_alloc_coherent(memcpy_parent->ddev.dev, ++ sizeof(*memcpy_scb), ++ &memcpy_scb_dma, GFP_KERNEL); ++ if (!memcpy_scb) ++ dev_warn(&pdev->dev, ++ "Failed to allocated memcpy scb\n"); + +- /* Grab channel 14 for the 40-bit DMA memcpy */ +- chans_available &= ~BIT(14); +- memcpy_chan = BCM2835_DMA_CHANIO(base, 14); ++ chans_available &= ~BIT(BCM2838_DMA_MEMCPY_CHAN); ++ } + + /* get irqs for each channel that we support */ +- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { ++ for (i = chan_start; i < chan_end; i++) { + /* skip masked out channels */ + if (!(chans_available & (1 << i))) { + irq[i] = -1; +@@ -1097,13 +1311,17 @@ static int bcm2835_dma_probe(struct plat + irq[i] = platform_get_irq(pdev, i < 11 ? i : 11); + } + ++ chan_count = 0; ++ + /* get irqs for each channel */ +- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { ++ for (i = chan_start; i < chan_end; i++) { + /* skip channels without irq */ + if (irq[i] < 0) + continue; + + /* check if there are other channels that also use this irq */ ++ /* FIXME: This will fail if interrupts are shared across ++ instances */ + irq_flags = 0; + for (j = 0; j <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; j++) + if ((i != j) && (irq[j] == irq[i])) { +@@ -1115,9 +1333,10 @@ static int bcm2835_dma_probe(struct plat + rc = bcm2835_dma_chan_init(od, i, irq[i], irq_flags); + if (rc) + goto err_no_dma; ++ chan_count++; + } + +- dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i); ++ dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", chan_count); + + /* Device-tree DMA controller registration */ + rc = of_dma_controller_register(pdev->dev.of_node, +@@ -1149,6 +1368,13 @@ static int bcm2835_dma_remove(struct pla + + bcm_dmaman_remove(pdev); + dma_async_device_unregister(&od->ddev); ++ if (memcpy_parent == od) { ++ dma_free_coherent(&pdev->dev, sizeof(*memcpy_scb), memcpy_scb, ++ memcpy_scb_dma); ++ memcpy_parent = NULL; ++ memcpy_scb = NULL; ++ memcpy_chan = NULL; ++ } + bcm2835_dma_free(od); + + return 0; +--- a/drivers/pci/controller/pcie-brcmstb-bounce.c ++++ b/drivers/pci/controller/pcie-brcmstb-bounce.c +@@ -91,7 +91,7 @@ struct dmabounce_device_info { + + static struct dmabounce_device_info *g_dmabounce_device_info; + +-extern int bcm2838_dma40_memcpy_init(struct device *dev); ++extern int bcm2838_dma40_memcpy_init(void); + extern void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size); + + #ifdef STATS +@@ -471,9 +471,9 @@ static const struct dma_map_ops dmabounc + .mapping_error = dmabounce_mapping_error, + }; + +-int brcm_pcie_bounce_register_dev(struct device *dev, +- unsigned long buffer_size, +- dma_addr_t threshold) ++int brcm_pcie_bounce_init(struct device *dev, ++ unsigned long buffer_size, ++ dma_addr_t threshold) + { + struct dmabounce_device_info *device_info; + int ret; +@@ -482,9 +482,9 @@ int brcm_pcie_bounce_register_dev(struct + if (g_dmabounce_device_info) + return -EBUSY; + +- ret = bcm2838_dma40_memcpy_init(dev); ++ ret = bcm2838_dma40_memcpy_init(); + if (ret) +- return ret; ++ return ret; + + device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC); + if (!device_info) { +@@ -515,9 +515,8 @@ int brcm_pcie_bounce_register_dev(struct + device_create_file(dev, &dev_attr_dmabounce_stats)); + + g_dmabounce_device_info = device_info; +- set_dma_ops(dev, &dmabounce_ops); + +- dev_info(dev, "dmabounce: registered device - %ld kB, threshold %pad\n", ++ dev_info(dev, "dmabounce: initialised - %ld kB, threshold %pad\n", + buffer_size / 1024, &threshold); + + return 0; +@@ -526,14 +525,13 @@ int brcm_pcie_bounce_register_dev(struct + kfree(device_info); + return ret; + } +-EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); ++EXPORT_SYMBOL(brcm_pcie_bounce_init); + +-void brcm_pcie_bounce_unregister_dev(struct device *dev) ++void brcm_pcie_bounce_uninit(struct device *dev) + { + struct dmabounce_device_info *device_info = g_dmabounce_device_info; + + g_dmabounce_device_info = NULL; +- set_dma_ops(dev, NULL); + + if (!device_info) { + dev_warn(dev, +@@ -554,10 +552,16 @@ void brcm_pcie_bounce_unregister_dev(str + device_remove_file(dev, &dev_attr_dmabounce_stats)); + + kfree(device_info); ++} ++EXPORT_SYMBOL(brcm_pcie_bounce_uninit); ++ ++int brcm_pcie_bounce_register_dev(struct device *dev) ++{ ++ set_dma_ops(dev, &dmabounce_ops); + +- dev_info(dev, "dmabounce: device unregistered\n"); ++ return 0; + } +-EXPORT_SYMBOL(brcm_pcie_bounce_unregister_dev); ++EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); + + MODULE_AUTHOR("Phil Elwell "); + MODULE_DESCRIPTION("Dedicate DMA bounce support for pcie-brcmstb"); +--- a/drivers/pci/controller/pcie-brcmstb-bounce.h ++++ b/drivers/pci/controller/pcie-brcmstb-bounce.h +@@ -8,21 +8,26 @@ + + #ifdef CONFIG_ARM + +-int brcm_pcie_bounce_register_dev(struct device *dev, unsigned long buffer_size, +- dma_addr_t threshold); +- +-int brcm_pcie_bounce_unregister_dev(struct device *dev); ++int brcm_pcie_bounce_init(struct device *dev, unsigned long buffer_size, ++ dma_addr_t threshold); ++int brcm_pcie_bounce_uninit(struct device *dev); ++int brcm_pcie_bounce_register_dev(struct device *dev); + + #else + +-static inline int brcm_pcie_bounce_register_dev(struct device *dev, +- unsigned long buffer_size, +- dma_addr_t threshold) ++static inline int brcm_pcie_bounce_init(struct device *dev, ++ unsigned long buffer_size, ++ dma_addr_t threshold) ++{ ++ return 0; ++} ++ ++static inline int brcm_pcie_bounce_uninit(struct device *dev) + { + return 0; + } + +-static inline int brcm_pcie_bounce_unregister_dev(struct device *dev) ++static inline int brcm_pcie_bounce_register_dev(struct device *dev) + { + return 0; + } +--- a/drivers/pci/controller/pcie-brcmstb.c ++++ b/drivers/pci/controller/pcie-brcmstb.c +@@ -650,6 +650,7 @@ static void brcm_set_dma_ops(struct devi + + static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, + unsigned int val); ++ + static int brcmstb_platform_notifier(struct notifier_block *nb, + unsigned long event, void *__dev) + { +@@ -663,12 +664,11 @@ static int brcmstb_platform_notifier(str + strcmp(dev->kobj.name, rc_name)) { + int ret; + +- ret = brcm_pcie_bounce_register_dev(dev, bounce_buffer, +- (dma_addr_t)bounce_threshold); ++ ret = brcm_pcie_bounce_register_dev(dev); + if (ret) { + dev_err(dev, + "brcm_pcie_bounce_register_dev() failed: %d\n", +- ret); ++ ret); + return ret; + } + } +@@ -681,8 +681,6 @@ static int brcmstb_platform_notifier(str + brcm_pcie_perst_set(g_pcie, 1); + msleep(100); + brcm_pcie_perst_set(g_pcie, 0); +- } else if (max_pfn > (bounce_threshold/PAGE_SIZE)) { +- brcm_pcie_bounce_unregister_dev(dev); + } + return NOTIFY_OK; + +@@ -1718,6 +1716,7 @@ static int brcm_pcie_probe(struct platfo + void __iomem *base; + struct pci_host_bridge *bridge; + struct pci_bus *child; ++ extern unsigned long max_pfn; + + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); + if (!bridge) +@@ -1753,6 +1752,20 @@ static int brcm_pcie_probe(struct platfo + if (IS_ERR(base)) + return PTR_ERR(base); + ++ /* To Do: Add hardware check if this ever gets fixed */ ++ if (max_pfn > (bounce_threshold/PAGE_SIZE)) { ++ int ret; ++ ret = brcm_pcie_bounce_init(&pdev->dev, bounce_buffer, ++ (dma_addr_t)bounce_threshold); ++ if (ret) { ++ if (ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, ++ "could not init bounce buffers: %d\n", ++ ret); ++ return ret; ++ } ++ } ++ + pcie->clk = of_clk_get_by_name(dn, "sw_pcie"); + if (IS_ERR(pcie->clk)) { + dev_warn(&pdev->dev, "could not get clock\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0593-drm-vc4-Increase-max-screen-size-to-4096x4096.patch b/target/linux/brcm2708/patches-4.19/950-0593-drm-vc4-Increase-max-screen-size-to-4096x4096.patch deleted file mode 100644 index 844bdcbb6b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0593-drm-vc4-Increase-max-screen-size-to-4096x4096.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 7c4a99448be56e288a5845f3de77b7eef006a450 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 3 Apr 2019 15:20:05 +0100 -Subject: [PATCH 593/806] drm: vc4: Increase max screen size to 4096x4096. - -We now should support 4k screens, therefore this limit needs to -be increased. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_kms.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_kms.c -@@ -429,8 +429,8 @@ int vc4_kms_load(struct drm_device *dev) - return ret; - } - -- dev->mode_config.max_width = 2048; -- dev->mode_config.max_height = 2048; -+ dev->mode_config.max_width = 4096; -+ dev->mode_config.max_height = 4096; - dev->mode_config.funcs = &vc4_mode_funcs; - dev->mode_config.preferred_depth = 24; - dev->mode_config.async_page_flip = true; diff --git a/target/linux/brcm2708/patches-4.19/950-0594-BCM270X_DT-Leave-bulk-channel-in-dma-channel-mask.patch b/target/linux/brcm2708/patches-4.19/950-0594-BCM270X_DT-Leave-bulk-channel-in-dma-channel-mask.patch new file mode 100644 index 0000000000..20d08ba26c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0594-BCM270X_DT-Leave-bulk-channel-in-dma-channel-mask.patch @@ -0,0 +1,27 @@ +From db81536216256cdd4b8a17879e6628be47c74414 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 5 Jun 2019 21:32:03 +0100 +Subject: [PATCH] BCM270X_DT: Leave bulk channel in dma channel mask + +The updated bcm2835-dma driver does not require the BULK channel +to be removed from the set of available channels, as provided by +dma-channel-mask. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi.dtsi | 4 ---- + 1 file changed, 4 deletions(-) + +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -124,10 +124,6 @@ + }; + }; + +-&dma { +- brcm,dma-channel-mask = <0x7f34>; +-}; +- + &hdmi { + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0594-drm-vc4-Add-support-for-multiple-displays-to-fkms.patch b/target/linux/brcm2708/patches-4.19/950-0594-drm-vc4-Add-support-for-multiple-displays-to-fkms.patch deleted file mode 100644 index b93fa8e121..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0594-drm-vc4-Add-support-for-multiple-displays-to-fkms.patch +++ /dev/null @@ -1,280 +0,0 @@ -From 4817db177a74ac58671e1fe84d98d584375d9697 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 3 Apr 2019 17:15:45 +0100 -Subject: [PATCH 594/806] drm: vc4: Add support for multiple displays to fkms - -There is a slightly nasty hack in that all crtcs share the -same SMI interrupt from the firmware. This seems to currently -work well enough, but ought to be fixed at a later date. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 160 +++++++++++++++++-------- - 1 file changed, 113 insertions(+), 47 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -29,6 +29,8 @@ - #include "vc_image_types.h" - #include - -+#define PLANES_PER_CRTC 3 -+ - struct set_plane { - u8 display; - u8 plane_id; -@@ -175,6 +177,7 @@ struct vc4_crtc { - struct drm_pending_vblank_event *event; - u32 overscan[4]; - bool vblank_enabled; -+ u32 display_number; - }; - - static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) -@@ -480,6 +483,7 @@ static const struct drm_plane_helper_fun - - static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, - enum drm_plane_type type, -+ u8 display_num, - u8 plane_id) - { - struct drm_plane *plane = NULL; -@@ -543,7 +547,7 @@ static struct drm_plane *vc4_fkms_plane_ - vc4_plane->mb.tag.tag = RPI_FIRMWARE_SET_PLANE; - vc4_plane->mb.tag.buf_size = sizeof(struct set_plane); - vc4_plane->mb.tag.req_resp_size = 0; -- vc4_plane->mb.plane.display = 0; -+ vc4_plane->mb.plane.display = display_num; - vc4_plane->mb.plane.plane_id = plane_id; - vc4_plane->mb.plane.layer = default_zpos ? default_zpos : -127; - -@@ -630,16 +634,20 @@ static void vc4_crtc_handle_page_flip(st - - static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) - { -- struct vc4_crtc *vc4_crtc = data; -- u32 stat = readl(vc4_crtc->regs + SMICS); -+ struct vc4_crtc **crtc_list = data; -+ int i; -+ u32 stat = readl(crtc_list[0]->regs + SMICS); - irqreturn_t ret = IRQ_NONE; - - if (stat & SMICS_INTERRUPTS) { -- writel(0, vc4_crtc->regs + SMICS); -- if (vc4_crtc->vblank_enabled) -- drm_crtc_handle_vblank(&vc4_crtc->base); -- vc4_crtc_handle_page_flip(vc4_crtc); -- ret = IRQ_HANDLED; -+ writel(0, crtc_list[0]->regs + SMICS); -+ -+ for (i = 0; crtc_list[i]; i++) { -+ if (crtc_list[i]->vblank_enabled) -+ drm_crtc_handle_vblank(&crtc_list[i]->base); -+ vc4_crtc_handle_page_flip(crtc_list[i]); -+ ret = IRQ_HANDLED; -+ } - } - - return ret; -@@ -836,66 +844,55 @@ static const struct drm_encoder_helper_f - .disable = vc4_fkms_encoder_disable, - }; - --static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) -+static int vc4_fkms_create_screen(struct device *dev, struct drm_device *drm, -+ int display_idx, int display_ref, -+ struct vc4_crtc **ret_crtc) - { -- struct platform_device *pdev = to_platform_device(dev); -- struct drm_device *drm = dev_get_drvdata(master); - struct vc4_dev *vc4 = to_vc4_dev(drm); - struct vc4_crtc *vc4_crtc; - struct vc4_fkms_encoder *vc4_encoder; - struct drm_crtc *crtc; - struct drm_plane *primary_plane, *overlay_plane, *cursor_plane; - struct drm_plane *destroy_plane, *temp; -- struct device_node *firmware_node; - u32 blank = 1; - int ret; - -- vc4->firmware_kms = true; -- -- /* firmware kms doesn't have precise a scanoutpos implementation, so -- * we can't do the precise vblank timestamp mode. -- */ -- drm->driver->get_scanout_position = NULL; -- drm->driver->get_vblank_timestamp = NULL; -- - vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); - if (!vc4_crtc) - return -ENOMEM; - crtc = &vc4_crtc->base; - -- firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); -- vc4->firmware = rpi_firmware_get(firmware_node); -- if (!vc4->firmware) { -- DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); -- return -EPROBE_DEFER; -- } -- of_node_put(firmware_node); -- -- /* Map the SMI interrupt reg */ -- vc4_crtc->regs = vc4_ioremap_regs(pdev, 0); -- if (IS_ERR(vc4_crtc->regs)) -- return PTR_ERR(vc4_crtc->regs); -+ vc4_crtc->display_number = display_ref; - - /* Blank the firmware provided framebuffer */ - rpi_firmware_property(vc4->firmware, - RPI_FIRMWARE_FRAMEBUFFER_BLANK, - &blank, sizeof(blank)); - -- primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY, 0); -+ primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY, -+ display_ref, -+ 0 + (display_idx * PLANES_PER_CRTC) -+ ); - if (IS_ERR(primary_plane)) { - dev_err(dev, "failed to construct primary plane\n"); - ret = PTR_ERR(primary_plane); - goto err; - } - -- overlay_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_OVERLAY, 1); -+ overlay_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_OVERLAY, -+ display_ref, -+ 1 + (display_idx * PLANES_PER_CRTC) -+ ); - if (IS_ERR(overlay_plane)) { - dev_err(dev, "failed to construct overlay plane\n"); - ret = PTR_ERR(overlay_plane); - goto err; - } - -- cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR, 2); -+ cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR, -+ display_ref, -+ 2 + (display_idx * PLANES_PER_CRTC) -+ ); - if (IS_ERR(cursor_plane)) { - dev_err(dev, "failed to construct cursor plane\n"); - ret = PTR_ERR(cursor_plane); -@@ -922,13 +919,6 @@ static int vc4_fkms_bind(struct device * - goto err_destroy_encoder; - } - -- writel(0, vc4_crtc->regs + SMICS); -- ret = devm_request_irq(dev, platform_get_irq(pdev, 0), -- vc4_crtc_irq_handler, 0, "vc4 firmware kms", -- vc4_crtc); -- if (ret) -- goto err_destroy_connector; -- - ret = rpi_firmware_property(vc4->firmware, - RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN, - &vc4_crtc->overscan, -@@ -938,7 +928,7 @@ static int vc4_fkms_bind(struct device * - memset(&vc4_crtc->overscan, 0, sizeof(vc4_crtc->overscan)); - } - -- platform_set_drvdata(pdev, vc4_crtc); -+ *ret_crtc = vc4_crtc; - - return 0; - -@@ -955,15 +945,91 @@ err: - return ret; - } - -+static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct drm_device *drm = dev_get_drvdata(master); -+ struct vc4_dev *vc4 = to_vc4_dev(drm); -+ struct device_node *firmware_node; -+ struct vc4_crtc **crtc_list; -+ u32 num_displays, display_num; -+ int ret; -+ const u32 display_num_lookup[] = {2, 7, 1}; -+ -+ vc4->firmware_kms = true; -+ -+ /* firmware kms doesn't have precise a scanoutpos implementation, so -+ * we can't do the precise vblank timestamp mode. -+ */ -+ drm->driver->get_scanout_position = NULL; -+ drm->driver->get_vblank_timestamp = NULL; -+ -+ firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); -+ vc4->firmware = rpi_firmware_get(firmware_node); -+ if (!vc4->firmware) { -+ DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); -+ return -EPROBE_DEFER; -+ } -+ of_node_put(firmware_node); -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS, -+ &num_displays, sizeof(u32)); -+ -+ /* If we fail to get the number of displays, or it returns 0, then -+ * assume old firmware that doesn't have the mailbox call, so just -+ * set one display -+ */ -+ if (ret || num_displays == 0) { -+ num_displays = 1; -+ DRM_WARN("Unable to determine number of displays's. Assuming 1\n"); -+ ret = 0; -+ } -+ -+ /* Allocate a list, with space for a NULL on the end */ -+ crtc_list = devm_kzalloc(dev, sizeof(crtc_list) * (num_displays + 1), -+ GFP_KERNEL); -+ if (!crtc_list) -+ return -ENOMEM; -+ -+ for (display_num = 0; display_num < num_displays; display_num++) { -+ ret = vc4_fkms_create_screen(dev, drm, display_num, -+ display_num_lookup[display_num], -+ &crtc_list[display_num]); -+ if (ret) -+ DRM_ERROR("Oh dear, failed to create display %u\n", -+ display_num); -+ } -+ -+ /* Map the SMI interrupt reg */ -+ crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0); -+ if (IS_ERR(crtc_list[0]->regs)) -+ DRM_ERROR("Oh dear, failed to map registers\n"); -+ -+ writel(0, crtc_list[0]->regs + SMICS); -+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), -+ vc4_crtc_irq_handler, 0, "vc4 firmware kms", -+ crtc_list); -+ if (ret) -+ DRM_ERROR("Oh dear, failed to register IRQ\n"); -+ -+ platform_set_drvdata(pdev, crtc_list); -+ -+ return 0; -+} -+ - static void vc4_fkms_unbind(struct device *dev, struct device *master, - void *data) - { - struct platform_device *pdev = to_platform_device(dev); -- struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev); -+ struct vc4_crtc **crtc_list = dev_get_drvdata(dev); -+ int i; - -- vc4_fkms_connector_destroy(vc4_crtc->connector); -- vc4_fkms_encoder_destroy(vc4_crtc->encoder); -- drm_crtc_cleanup(&vc4_crtc->base); -+ for (i = 0; crtc_list[i]; i++) { -+ vc4_fkms_connector_destroy(crtc_list[i]->connector); -+ vc4_fkms_encoder_destroy(crtc_list[i]->encoder); -+ drm_crtc_cleanup(&crtc_list[i]->base); -+ } - - platform_set_drvdata(pdev, NULL); - } diff --git a/target/linux/brcm2708/patches-4.19/950-0595-SQUASH-bcm2835-dma-Remove-debugging.patch b/target/linux/brcm2708/patches-4.19/950-0595-SQUASH-bcm2835-dma-Remove-debugging.patch new file mode 100644 index 0000000000..f8d988067d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0595-SQUASH-bcm2835-dma-Remove-debugging.patch @@ -0,0 +1,45 @@ +From eecf4b8568f0a0d6b90364299eed6b12ce63c245 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 6 Jun 2019 09:35:08 +0100 +Subject: [PATCH] SQUASH: bcm2835-dma: Remove debugging + +Signed-off-by: Phil Elwell +--- + drivers/dma/bcm2835-dma.c | 5 ----- + 1 file changed, 5 deletions(-) + +--- a/drivers/dma/bcm2835-dma.c ++++ b/drivers/dma/bcm2835-dma.c +@@ -584,8 +584,6 @@ static void bcm2835_dma_fill_cb_chain_wi + dma_addr_t addr; + struct scatterlist *sgent; + +- pr_err("dma_fill_chain_with_sg(ch %d, dir %d):\n", c->ch, direction); +- + max_len = bcm2835_dma_max_frame_length(c); + for_each_sg(sgl, sgent, sg_len, i) { + if (c->is_40bit_channel) { +@@ -603,7 +601,6 @@ static void bcm2835_dma_fill_cb_chain_wi + scb->srci = upper_32_bits(addr) | BCM2838_DMA40_INC; + } + scb->len = min(len, max_len); +- pr_err(" %llx, %x\n", (u64)addr, scb->len); + } + } else { + for (addr = sg_dma_address(sgent), +@@ -616,7 +613,6 @@ static void bcm2835_dma_fill_cb_chain_wi + else + cb->cb->src = addr; + cb->cb->length = min(len, max_len); +- pr_err(" %llx, %x\n", (u64)addr, cb->cb->length); + } + } + } +@@ -659,7 +655,6 @@ static void bcm2835_dma_start_desc(struc + struct virt_dma_desc *vd = vchan_next_desc(&c->vc); + struct bcm2835_desc *d; + +- pr_err("dma_start_desc(%px)\n", vd); + if (!vd) { + c->desc = NULL; + return; diff --git a/target/linux/brcm2708/patches-4.19/950-0595-drm-vc4-Fix-build-warning.patch b/target/linux/brcm2708/patches-4.19/950-0595-drm-vc4-Fix-build-warning.patch deleted file mode 100644 index 837141c8e1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0595-drm-vc4-Fix-build-warning.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 52d2903959ff9a1d68701a04884e18b31d051f30 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 5 Apr 2019 17:21:56 +0100 -Subject: [PATCH 595/806] drm: vc4: Fix build warning - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -932,8 +932,6 @@ static int vc4_fkms_create_screen(struct - - return 0; - --err_destroy_connector: -- vc4_fkms_connector_destroy(vc4_crtc->connector); - err_destroy_encoder: - vc4_fkms_encoder_destroy(vc4_crtc->encoder); - list_for_each_entry_safe(destroy_plane, temp, diff --git a/target/linux/brcm2708/patches-4.19/950-0596-drm-vc4-Select-display-to-blank-during-initialisatio.patch b/target/linux/brcm2708/patches-4.19/950-0596-drm-vc4-Select-display-to-blank-during-initialisatio.patch deleted file mode 100644 index 7a20bff629..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0596-drm-vc4-Select-display-to-blank-during-initialisatio.patch +++ /dev/null @@ -1,54 +0,0 @@ -From a267031f384a4433fdcd662a97bce7c4949d3fd6 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 5 Apr 2019 17:23:15 +0100 -Subject: [PATCH 596/806] drm: vc4: Select display to blank during - initialisation - -Otherwise the rainbow splash screen remained in the display list - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 18 ++++++++++++++---- - 1 file changed, 14 insertions(+), 4 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -87,6 +87,13 @@ struct fb_alloc_tags { - u32 layer; - }; - -+struct mailbox_blank_display { -+ struct rpi_firmware_property_tag_header tag1; -+ u32 display; -+ struct rpi_firmware_property_tag_header tag2; -+ u32 blank; -+}; -+ - static const struct vc_image_format { - u32 drm; /* DRM_FORMAT_* */ - u32 vc_image; /* VC_IMAGE_* */ -@@ -854,7 +861,12 @@ static int vc4_fkms_create_screen(struct - struct drm_crtc *crtc; - struct drm_plane *primary_plane, *overlay_plane, *cursor_plane; - struct drm_plane *destroy_plane, *temp; -- u32 blank = 1; -+ struct mailbox_blank_display blank = { -+ .tag1 = {RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, 4, 0, }, -+ .display = display_idx, -+ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_BLANK, 4, 0, }, -+ .blank = 1, -+ }; - int ret; - - vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); -@@ -865,9 +877,7 @@ static int vc4_fkms_create_screen(struct - vc4_crtc->display_number = display_ref; - - /* Blank the firmware provided framebuffer */ -- rpi_firmware_property(vc4->firmware, -- RPI_FIRMWARE_FRAMEBUFFER_BLANK, -- &blank, sizeof(blank)); -+ rpi_firmware_property_list(vc4->firmware, &blank, sizeof(blank)); - - primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY, - display_ref, diff --git a/target/linux/brcm2708/patches-4.19/950-0596-dts-Include-CSI-lane-config-for-csi1.patch b/target/linux/brcm2708/patches-4.19/950-0596-dts-Include-CSI-lane-config-for-csi1.patch new file mode 100644 index 0000000000..74cb946313 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0596-dts-Include-CSI-lane-config-for-csi1.patch @@ -0,0 +1,23 @@ +From 2fcb94a04778708b13b6d36390000e97063460e6 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 31 May 2019 17:57:26 +0100 +Subject: [PATCH] dts: Include CSI lane config for csi1 + +Without the include the peripheral is configured to have 0 +data lanes, which doesn't allow much data to be passed. + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2711.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" + + / { + compatible = "raspberrypi,4-model-b", "brcm,bcm2838", "brcm,bcm2837"; diff --git a/target/linux/brcm2708/patches-4.19/950-0597-drm-vc4-Fix-T-format-modifiers-in-FKMS.patch b/target/linux/brcm2708/patches-4.19/950-0597-drm-vc4-Fix-T-format-modifiers-in-FKMS.patch new file mode 100644 index 0000000000..6d3da8da8d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0597-drm-vc4-Fix-T-format-modifiers-in-FKMS.patch @@ -0,0 +1,28 @@ +From ba21a5129def696c154c84df087f07bc748abe7d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 7 Jun 2019 11:31:21 +0100 +Subject: [PATCH] drm/vc4: Fix T-format modifiers in FKMS. + +The wrong vc_image formats were being checked for in the switch +statement. Correct these. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -458,10 +458,10 @@ static void vc4_plane_atomic_update(stru + switch (fb->modifier) { + case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: + switch (mb->plane.vc_image_type) { +- case VC_IMAGE_RGBX32: ++ case VC_IMAGE_XRGB8888: + mb->plane.vc_image_type = VC_IMAGE_TF_RGBX32; + break; +- case VC_IMAGE_RGBA32: ++ case VC_IMAGE_ARGB8888: + mb->plane.vc_image_type = VC_IMAGE_TF_RGBA32; + break; + case VC_IMAGE_RGB565: diff --git a/target/linux/brcm2708/patches-4.19/950-0597-drm-vc4-Remove-now-unused-structure.patch b/target/linux/brcm2708/patches-4.19/950-0597-drm-vc4-Remove-now-unused-structure.patch deleted file mode 100644 index 2e0655b858..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0597-drm-vc4-Remove-now-unused-structure.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 0bbbf4f4a618072e6987f439784f2d24a81b8f2d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 5 Apr 2019 17:24:20 +0100 -Subject: [PATCH 597/806] drm: vc4: Remove now unused structure. - -Cleaning up structure that was unused after -fbb59a2 drm: vc4: Add an overlay plane to vc4-firmware-kms - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 19 ------------------- - 1 file changed, 19 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -68,25 +68,6 @@ struct mailbox_set_plane { - struct set_plane plane; - }; - --struct fb_alloc_tags { -- struct rpi_firmware_property_tag_header tag1; -- u32 xres, yres; -- struct rpi_firmware_property_tag_header tag2; -- u32 xres_virtual, yres_virtual; -- struct rpi_firmware_property_tag_header tag3; -- u32 bpp; -- struct rpi_firmware_property_tag_header tag4; -- u32 xoffset, yoffset; -- struct rpi_firmware_property_tag_header tag5; -- u32 base, screen_size; -- struct rpi_firmware_property_tag_header tag6; -- u32 pitch; -- struct rpi_firmware_property_tag_header tag7; -- u32 alpha_mode; -- struct rpi_firmware_property_tag_header tag8; -- u32 layer; --}; -- - struct mailbox_blank_display { - struct rpi_firmware_property_tag_header tag1; - u32 display; diff --git a/target/linux/brcm2708/patches-4.19/950-0598-bcm2711-dts-Disable-the-v3d-node-by-default.patch b/target/linux/brcm2708/patches-4.19/950-0598-bcm2711-dts-Disable-the-v3d-node-by-default.patch new file mode 100644 index 0000000000..eec00db56a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0598-bcm2711-dts-Disable-the-v3d-node-by-default.patch @@ -0,0 +1,23 @@ +From 27fc1dbeee2a58abcb80ffc1c8f161d3abfeac9a Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 10 Jun 2019 17:22:44 +0100 +Subject: [PATCH] bcm2711 dts: Disable the v3d node by default + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2711.dtsi | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/arch/arm/boot/dts/bcm2711.dtsi ++++ b/arch/arm/boot/dts/bcm2711.dtsi +@@ -13,6 +13,10 @@ + }; + }; + ++&v3d { ++ status = "disabled"; ++}; ++ + &dma { + brcm,dma-channel-mask = <0x7ef5>; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0598-drm-vc4-Query-the-display-ID-for-each-display-in-FKM.patch b/target/linux/brcm2708/patches-4.19/950-0598-drm-vc4-Query-the-display-ID-for-each-display-in-FKM.patch deleted file mode 100644 index d37b2d1695..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0598-drm-vc4-Query-the-display-ID-for-each-display-in-FKM.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 13723c680a129d79a7872ee131c0201374ba62ce Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 9 Apr 2019 12:37:28 +0100 -Subject: [PATCH 598/806] drm: vc4: Query the display ID for each display in - FKMS - -Replace the hard coded list of display IDs for a mailbox call -that returns the display ID for each display that has been -detected. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 16 +++++++++++++--- - include/soc/bcm2835/raspberrypi-firmware.h | 1 + - 2 files changed, 14 insertions(+), 3 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -943,7 +943,7 @@ static int vc4_fkms_bind(struct device * - struct vc4_crtc **crtc_list; - u32 num_displays, display_num; - int ret; -- const u32 display_num_lookup[] = {2, 7, 1}; -+ u32 display_id; - - vc4->firmware_kms = true; - -@@ -982,8 +982,18 @@ static int vc4_fkms_bind(struct device * - return -ENOMEM; - - for (display_num = 0; display_num < num_displays; display_num++) { -- ret = vc4_fkms_create_screen(dev, drm, display_num, -- display_num_lookup[display_num], -+ display_id = display_num; -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID, -+ &display_id, sizeof(display_id)); -+ /* FIXME: Determine the correct error handling here. -+ * Should we fail to create the one "screen" but keep the -+ * others, or fail the whole thing? -+ */ -+ if (ret) -+ DRM_ERROR("Failed to get display id %u\n", display_num); -+ -+ ret = vc4_fkms_create_screen(dev, drm, display_num, display_id, - &crtc_list[display_num]); - if (ret) - DRM_ERROR("Oh dear, failed to create display %u\n", ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -117,6 +117,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, - RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, - RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016, - RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013, - RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013, - RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014, diff --git a/target/linux/brcm2708/patches-4.19/950-0599-drm-vc4-Remove-340MHz-clock-limit-from-FKMS-now-scra.patch b/target/linux/brcm2708/patches-4.19/950-0599-drm-vc4-Remove-340MHz-clock-limit-from-FKMS-now-scra.patch new file mode 100644 index 0000000000..3e3d0704d6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0599-drm-vc4-Remove-340MHz-clock-limit-from-FKMS-now-scra.patch @@ -0,0 +1,29 @@ +From d4a180e5b67c3ca9b8559d4f926f22b6c6705082 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 10 Jun 2019 16:32:51 +0100 +Subject: [PATCH] drm/vc4: Remove 340MHz clock limit from FKMS now + scrambling issues resolved + +Firmware TMDS scrambling is now being correctly configured, so +we can use it. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 ------ + 1 file changed, 6 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -830,12 +830,6 @@ vc4_crtc_mode_valid(struct drm_crtc *crt + break; + } + +- /* Limit the pixel clock until we can get dynamic HDMI 2.0 scrambling +- * working. +- */ +- if (mode->clock > 340000) +- return MODE_CLOCK_HIGH; +- + return MODE_OK; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0599-drm-vc4-Set-the-display-number-when-querying-the-dis.patch b/target/linux/brcm2708/patches-4.19/950-0599-drm-vc4-Set-the-display-number-when-querying-the-dis.patch deleted file mode 100644 index 9f09809f1e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0599-drm-vc4-Set-the-display-number-when-querying-the-dis.patch +++ /dev/null @@ -1,103 +0,0 @@ -From 1b9eb8d557c692e5f1dd831b5e7134e6d07a4dd4 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 9 Apr 2019 14:00:07 +0100 -Subject: [PATCH 599/806] drm/vc4: Set the display number when querying the - display resolution - -Without this the two displays got set to the same resolution. -(Requires a firmware bug fix to work). - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 37 +++++++++++++++++++------- - 1 file changed, 27 insertions(+), 10 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -75,6 +75,13 @@ struct mailbox_blank_display { - u32 blank; - }; - -+struct mailbox_get_width_height { -+ struct rpi_firmware_property_tag_header tag1; -+ u32 display; -+ struct rpi_firmware_property_tag_header tag2; -+ u32 wh[2]; -+}; -+ - static const struct vc_image_format { - u32 drm; /* DRM_FORMAT_* */ - u32 vc_image; /* VC_IMAGE_* */ -@@ -192,6 +199,7 @@ struct vc4_fkms_connector { - * hook. - */ - struct drm_encoder *encoder; -+ u32 display_idx; - }; - - static inline struct vc4_fkms_connector * -@@ -723,21 +731,27 @@ vc4_fkms_connector_detect(struct drm_con - static int vc4_fkms_connector_get_modes(struct drm_connector *connector) - { - struct drm_device *dev = connector->dev; -+ struct vc4_fkms_connector *fkms_connector = -+ to_vc4_fkms_connector(connector); - struct vc4_dev *vc4 = to_vc4_dev(dev); -- u32 wh[2] = {0, 0}; -- int ret; - struct drm_display_mode *mode; -+ struct mailbox_get_width_height wh = { -+ .tag1 = {RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, 4, 0, }, -+ .display = fkms_connector->display_idx, -+ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, -+ 8, 0, }, -+ }; -+ int ret; -+ -+ ret = rpi_firmware_property_list(vc4->firmware, &wh, sizeof(wh)); - -- ret = rpi_firmware_property(vc4->firmware, -- RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, -- &wh, sizeof(wh)); - if (ret) { - DRM_ERROR("Failed to get screen size: %d (0x%08x 0x%08x)\n", -- ret, wh[0], wh[1]); -+ ret, wh.wh[0], wh.wh[1]); - return 0; - } - -- mode = drm_cvt_mode(dev, wh[0], wh[1], 60 /* vrefresh */, -+ mode = drm_cvt_mode(dev, wh.wh[0], wh.wh[1], 60 /* vrefresh */, - 0, 0, false); - drm_mode_probed_add(connector, mode); - -@@ -772,8 +786,9 @@ static const struct drm_connector_helper - .best_encoder = vc4_fkms_connector_best_encoder, - }; - --static struct drm_connector *vc4_fkms_connector_init(struct drm_device *dev, -- struct drm_encoder *encoder) -+static struct drm_connector * -+vc4_fkms_connector_init(struct drm_device *dev, struct drm_encoder *encoder, -+ u32 display_idx) - { - struct drm_connector *connector = NULL; - struct vc4_fkms_connector *fkms_connector; -@@ -788,6 +803,7 @@ static struct drm_connector *vc4_fkms_co - connector = &fkms_connector->base; - - fkms_connector->encoder = encoder; -+ fkms_connector->display_idx = display_idx; - - drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, - DRM_MODE_CONNECTOR_HDMIA); -@@ -904,7 +920,8 @@ static int vc4_fkms_create_screen(struct - drm_encoder_helper_add(&vc4_encoder->base, - &vc4_fkms_encoder_helper_funcs); - -- vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base); -+ vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base, -+ display_idx); - if (IS_ERR(vc4_crtc->connector)) { - ret = PTR_ERR(vc4_crtc->connector); - goto err_destroy_encoder; diff --git a/target/linux/brcm2708/patches-4.19/950-0600-Revert-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.patch b/target/linux/brcm2708/patches-4.19/950-0600-Revert-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.patch new file mode 100644 index 0000000000..0ad70eb1e0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0600-Revert-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.patch @@ -0,0 +1,113 @@ +From 5f6feeaf528cf922a82f11e5b0711f5fe9d7538d Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Fri, 7 Jun 2019 14:50:12 +0100 +Subject: [PATCH] Revert "usb: xhci: hack xhci_urb_enqueue to support + hid.mousepoll behaviour" + +This reverts commit 1cf1071a79f320bc4497a3ade77431f04442eb17. +--- + drivers/usb/host/xhci.c | 86 ----------------------------------------- + 1 file changed, 86 deletions(-) + +--- a/drivers/usb/host/xhci.c ++++ b/drivers/usb/host/xhci.c +@@ -1425,87 +1425,6 @@ command_cleanup: + } + + /* +- * RPI: Fixup endpoint intervals when requested +- * - Check interval versus the (cached) endpoint context +- * - set the endpoint interval to the new value +- * - force an endpoint configure command +- */ +-static void xhci_fixup_interval(struct xhci_hcd *xhci, struct urb *urb, +- unsigned int slot_id, unsigned int ep_index) +-{ +- struct xhci_ep_ctx *ep_ctx_out, *ep_ctx_in; +- struct xhci_command *command; +- struct xhci_input_control_ctx *ctrl_ctx; +- struct xhci_virt_device *vdev; +- int xhci_interval, ep_interval; +- int ret; +- unsigned long flags; +- u32 ep_info_tmp; +- +- spin_lock_irqsave(&xhci->lock, flags); +- +- vdev = xhci->devs[slot_id]; +- /* Get context-derived endpoint interval */ +- ep_ctx_out = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index); +- ep_ctx_in = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index); +- xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx_out->ep_info)); +- ep_interval = urb->interval * 8; +- +- if (ep_interval == xhci_interval) { +- spin_unlock_irqrestore(&xhci->lock, flags); +- return; +- } +- +- xhci_dbg(xhci, "Fixup interval ep_interval=%d xhci_interval=%d\n", +- ep_interval, xhci_interval); +- command = xhci_alloc_command_with_ctx(xhci, true, GFP_ATOMIC); +- if (!command) { +- /* Failure here is benign, poll at the original rate */ +- spin_unlock_irqrestore(&xhci->lock, flags); +- return; +- } +- +- /* xHCI uses exponents for intervals... */ +- xhci_interval = fls(ep_interval) - 1; +- xhci_interval = clamp_val(xhci_interval, 3, 10); +- ep_info_tmp = le32_to_cpu(ep_ctx_out->ep_info); +- ep_info_tmp &= ~EP_INTERVAL(255); +- ep_info_tmp |= EP_INTERVAL(xhci_interval); +- +- /* Keep the endpoint context up-to-date while issuing the command. */ +- xhci_endpoint_copy(xhci, vdev->in_ctx, +- vdev->out_ctx, ep_index); +- ep_ctx_in->ep_info = cpu_to_le32(ep_info_tmp); +- +- /* +- * We need to drop the lock, so take an explicit copy +- * of the ep context. +- */ +- xhci_endpoint_copy(xhci, command->in_ctx, vdev->in_ctx, ep_index); +- +- ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); +- if (!ctrl_ctx) { +- xhci_warn(xhci, +- "%s: Could not get input context, bad type.\n", +- __func__); +- spin_unlock_irqrestore(&xhci->lock, flags); +- xhci_free_command(xhci, command); +- return; +- } +- ctrl_ctx->add_flags = xhci_get_endpoint_flag_from_index(ep_index); +- ctrl_ctx->drop_flags = 0; +- +- spin_unlock_irqrestore(&xhci->lock, flags); +- +- ret = xhci_configure_endpoint(xhci, urb->dev, command, +- false, false); +- if (ret) +- xhci_warn(xhci, "%s: Configure endpoint failed: %d\n", +- __func__, ret); +- xhci_free_command(xhci, command); +-} +- +-/* + * non-error returns are a promise to giveback() the urb later + * we drop ownership so next owner (or urb unlink) can get it + */ +@@ -1573,11 +1492,6 @@ static int xhci_urb_enqueue(struct usb_h + } + } + +- if (usb_endpoint_xfer_int(&urb->ep->desc) && +- (urb->dev->speed == USB_SPEED_FULL || +- urb->dev->speed == USB_SPEED_LOW)) +- xhci_fixup_interval(xhci, urb, slot_id, ep_index); +- + spin_lock_irqsave(&xhci->lock, flags); + + if (xhci->xhc_state & XHCI_STATE_DYING) { diff --git a/target/linux/brcm2708/patches-4.19/950-0600-drm-vc4-Need-to-call-drm_crtc_vblank_-on-off-from-vc.patch b/target/linux/brcm2708/patches-4.19/950-0600-drm-vc4-Need-to-call-drm_crtc_vblank_-on-off-from-vc.patch deleted file mode 100644 index 50f893413e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0600-drm-vc4-Need-to-call-drm_crtc_vblank_-on-off-from-vc.patch +++ /dev/null @@ -1,46 +0,0 @@ -From fe2432615ecc3500cc265d6b84334950b9cbd4bf Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 9 Apr 2019 18:14:44 +0100 -Subject: [PATCH 600/806] drm: vc4: Need to call drm_crtc_vblank_[on|off] from - vc4_crtc_[en|dis]able - -vblank needs to be enabled and disabled by the driver to avoid the -DRM framework complaining in the kernel log. - -vc4_fkms_disable_vblank needs to signal that we don't want vblank -callbacks too. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -562,6 +562,8 @@ static void vc4_crtc_mode_set_nofb(struc - - static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { -+ drm_crtc_vblank_off(crtc); -+ - /* Always turn the planes off on CRTC disable. In DRM, planes - * are enabled/disabled through the update/disable hooks - * above, and the CRTC enable/disable independently controls -@@ -577,6 +579,7 @@ static void vc4_crtc_disable(struct drm_ - - static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { -+ drm_crtc_vblank_on(crtc); - /* Unblank the planes (if they're supposed to be displayed). */ - - if (crtc->primary->state->fb) -@@ -673,6 +676,9 @@ static int vc4_fkms_enable_vblank(struct - - static void vc4_fkms_disable_vblank(struct drm_crtc *crtc) - { -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ -+ vc4_crtc->vblank_enabled = false; - } - - static const struct drm_crtc_funcs vc4_crtc_funcs = { diff --git a/target/linux/brcm2708/patches-4.19/950-0601-drm-vc4-Add-support-for-H-V-flips-on-each-plane-for-.patch b/target/linux/brcm2708/patches-4.19/950-0601-drm-vc4-Add-support-for-H-V-flips-on-each-plane-for-.patch deleted file mode 100644 index 2322a66f51..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0601-drm-vc4-Add-support-for-H-V-flips-on-each-plane-for-.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 129100bd38125bef5fe237ab867349dbe8b210ba Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 9 Apr 2019 17:19:51 +0100 -Subject: [PATCH 601/806] drm: vc4: Add support for H & V flips on each plane - for FKMS - -They are near zero cost options for the HVS, therefore they -may as well be implemented, and it allows us to invert the -DSI display. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 36 ++++++++++++++++++++++++++ - 1 file changed, 36 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -61,8 +61,21 @@ struct set_plane { - u8 padding; - - u32 planes[4]; /* DMA address of each plane */ -+ -+ u32 transform; - }; - -+/* Values for the transform field */ -+#define TRANSFORM_NO_ROTATE 0 -+#define TRANSFORM_ROTATE_180 BIT(1) -+#define TRANSFORM_FLIP_HRIZ BIT(16) -+#define TRANSFORM_FLIP_VERT BIT(17) -+ -+#define SUPPORTED_ROTATIONS (DRM_MODE_ROTATE_0 | \ -+ DRM_MODE_ROTATE_180 | \ -+ DRM_MODE_REFLECT_X | \ -+ DRM_MODE_REFLECT_Y) -+ - struct mailbox_set_plane { - struct rpi_firmware_property_tag_header tag; - struct set_plane plane; -@@ -274,6 +287,7 @@ static void vc4_plane_atomic_update(stru - struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); - int num_planes = fb->format->num_planes; - struct drm_display_mode *mode = &state->crtc->mode; -+ unsigned int rotation = SUPPORTED_ROTATIONS; - - mb->plane.vc_image_type = vc_fmt->vc_image; - mb->plane.width = fb->width; -@@ -294,6 +308,24 @@ static void vc4_plane_atomic_update(stru - mb->plane.is_vu = vc_fmt->is_vu; - mb->plane.planes[0] = bo->paddr + fb->offsets[0]; - -+ rotation = drm_rotation_simplify(state->rotation, rotation); -+ -+ switch (rotation) { -+ default: -+ case DRM_MODE_ROTATE_0: -+ mb->plane.transform = TRANSFORM_NO_ROTATE; -+ break; -+ case DRM_MODE_ROTATE_180: -+ mb->plane.transform = TRANSFORM_ROTATE_180; -+ break; -+ case DRM_MODE_REFLECT_X: -+ mb->plane.transform = TRANSFORM_FLIP_HRIZ; -+ break; -+ case DRM_MODE_REFLECT_Y: -+ mb->plane.transform = TRANSFORM_FLIP_VERT; -+ break; -+ } -+ - /* FIXME: If the dest rect goes off screen then clip the src rect so we - * don't have off-screen pixels. - */ -@@ -514,9 +546,13 @@ static struct drm_plane *vc4_fkms_plane_ - formats, num_formats, modifiers, - type, NULL); - -+ /* FIXME: Do we need to be checking return values from all these calls? -+ */ - drm_plane_helper_add(plane, &vc4_plane_helper_funcs); - - drm_plane_create_alpha_property(plane); -+ drm_plane_create_rotation_property(plane, DRM_MODE_ROTATE_0, -+ SUPPORTED_ROTATIONS); - - /* - * Default frame buffer setup is with FB on -127, and raspistill etc diff --git a/target/linux/brcm2708/patches-4.19/950-0601-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch b/target/linux/brcm2708/patches-4.19/950-0601-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch new file mode 100644 index 0000000000..99c4e4df3f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0601-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch @@ -0,0 +1,104 @@ +From f9c01b35ec7ea3f981c414af38c92c508487671a Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Tue, 11 Jun 2019 10:55:00 +0100 +Subject: [PATCH] usb: add plumbing for updating interrupt endpoint + interval state + +xHCI caches device and endpoint data after the interface is configured, +so an explicit command needs to be issued for any device driver wanting +to alter the polling interval of an endpoint. + +Add usb_fixup_endpoint() to allow drivers to do this. The fixup must be +called after calculating endpoint bandwidth requirements but before any +URBs are submitted. + +If polling intervals are shortened, any bandwidth reservations are no +longer valid but in practice polling intervals are only ever relaxed. + +Limit the scope to interrupt transfers for now. + +Signed-off-by: Jonathan Bell +--- + drivers/usb/core/hcd.c | 10 ++++++++++ + drivers/usb/core/message.c | 15 +++++++++++++++ + include/linux/usb.h | 2 ++ + include/linux/usb/hcd.h | 7 +++++++ + 4 files changed, 34 insertions(+) + +--- a/drivers/usb/core/hcd.c ++++ b/drivers/usb/core/hcd.c +@@ -2071,6 +2071,16 @@ reset: + return ret; + } + ++void usb_hcd_fixup_endpoint(struct usb_device *udev, ++ struct usb_host_endpoint *ep, int interval) ++{ ++ struct usb_hcd *hcd; ++ ++ hcd = bus_to_hcd(udev->bus); ++ if (hcd->driver->fixup_endpoint) ++ hcd->driver->fixup_endpoint(hcd, udev, ep, interval); ++} ++ + /* Disables the endpoint: synchronizes with the hcd to make sure all + * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must + * have been called previously. Use for set_configuration, set_interface, +--- a/drivers/usb/core/message.c ++++ b/drivers/usb/core/message.c +@@ -1113,6 +1113,21 @@ static void remove_intf_ep_devs(struct u + intf->ep_devs_created = 0; + } + ++void usb_fixup_endpoint(struct usb_device *dev, int epaddr, int interval) ++{ ++ unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; ++ struct usb_host_endpoint *ep; ++ ++ if (usb_endpoint_out(epaddr)) ++ ep = dev->ep_out[epnum]; ++ else ++ ep = dev->ep_in[epnum]; ++ ++ if (ep && usb_endpoint_xfer_int(&ep->desc)) ++ usb_hcd_fixup_endpoint(dev, ep, interval); ++} ++EXPORT_SYMBOL_GPL(usb_fixup_endpoint); ++ + /** + * usb_disable_endpoint -- Disable an endpoint by address + * @dev: the device whose endpoint is being disabled +--- a/include/linux/usb.h ++++ b/include/linux/usb.h +@@ -1809,6 +1809,8 @@ extern int usb_clear_halt(struct usb_dev + extern int usb_reset_configuration(struct usb_device *dev); + extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); + extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr); ++extern void usb_fixup_endpoint(struct usb_device *dev, int epaddr, ++ int interval); + + /* this request isn't really synchronous, but it belongs with the others */ + extern int usb_driver_set_configuration(struct usb_device *udev, int config); +--- a/include/linux/usb/hcd.h ++++ b/include/linux/usb/hcd.h +@@ -379,6 +379,11 @@ struct hc_driver { + * or bandwidth constraints. + */ + void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); ++ /* Override the endpoint-derived interval ++ * (if there is any cached hardware state). ++ */ ++ void (*fixup_endpoint)(struct usb_hcd *hcd, struct usb_device *udev, ++ struct usb_host_endpoint *ep, int interval); + /* Returns the hardware-chosen device address */ + int (*address_device)(struct usb_hcd *, struct usb_device *udev); + /* prepares the hardware to send commands to the device */ +@@ -435,6 +440,8 @@ extern void usb_hcd_unmap_urb_setup_for_ + extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *); + extern void usb_hcd_flush_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep); ++extern void usb_hcd_fixup_endpoint(struct usb_device *udev, ++ struct usb_host_endpoint *ep, int interval); + extern void usb_hcd_disable_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep); + extern void usb_hcd_reset_endpoint(struct usb_device *udev, diff --git a/target/linux/brcm2708/patches-4.19/950-0602-drm-vc4-Remove-unused-vc4_fkms_cancel_page_flip-func.patch b/target/linux/brcm2708/patches-4.19/950-0602-drm-vc4-Remove-unused-vc4_fkms_cancel_page_flip-func.patch deleted file mode 100644 index 0da4923729..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0602-drm-vc4-Remove-unused-vc4_fkms_cancel_page_flip-func.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 6885af169f6eeb386f410e556029c6518c6b67b2 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 10 Apr 2019 17:35:05 +0100 -Subject: [PATCH 602/806] drm: vc4: Remove unused vc4_fkms_cancel_page_flip - function - -"32a3dbe drm/vc4: Nuke preclose hook" removed vc4_cancel_page_flip, -but vc4_fkms_cancel_page_flip was still be added to with the -fkms driver, even though it was never called. -Nuke it too. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_drv.h | 1 - - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 20 -------------------- - 2 files changed, 21 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -724,7 +724,6 @@ extern const struct dma_fence_ops vc4_fe - - /* vc4_firmware_kms.c */ - extern struct platform_driver vc4_firmware_kms_driver; --void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); - - /* vc4_gem.c */ - void vc4_gem_init(struct drm_device *dev); ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -739,26 +739,6 @@ static const struct drm_crtc_helper_func - .atomic_flush = vc4_crtc_atomic_flush, - }; - --/* Frees the page flip event when the DRM device is closed with the -- * event still outstanding. -- */ --void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) --{ -- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -- struct drm_device *dev = crtc->dev; -- unsigned long flags; -- -- spin_lock_irqsave(&dev->event_lock, flags); -- -- if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) { -- kfree(&vc4_crtc->event->base); -- drm_crtc_vblank_put(crtc); -- vc4_crtc->event = NULL; -- } -- -- spin_unlock_irqrestore(&dev->event_lock, flags); --} -- - static const struct of_device_id vc4_firmware_kms_dt_match[] = { - { .compatible = "raspberrypi,rpi-firmware-kms" }, - {} diff --git a/target/linux/brcm2708/patches-4.19/950-0602-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch b/target/linux/brcm2708/patches-4.19/950-0602-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch new file mode 100644 index 0000000000..d66b9716a1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0602-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch @@ -0,0 +1,129 @@ +From 903af89ac9a9b82b6e736ab04e3848672a0ab364 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Tue, 11 Jun 2019 11:33:39 +0100 +Subject: [PATCH] xhci: implement xhci_fixup_endpoint for interval + adjustments + +Must be called in a non-atomic context, after the endpoint +has been registered with the hardware via xhci_add_endpoint +and before the first URB is submitted for the endpoint. + +Signed-off-by: Jonathan Bell +--- + drivers/usb/host/xhci.c | 98 +++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 98 insertions(+) + +--- a/drivers/usb/host/xhci.c ++++ b/drivers/usb/host/xhci.c +@@ -1425,6 +1425,103 @@ command_cleanup: + } + + /* ++ * RPI: Fixup endpoint intervals when requested ++ * - Check interval versus the (cached) endpoint context ++ * - set the endpoint interval to the new value ++ * - force an endpoint configure command ++ * XXX: bandwidth is not recalculated. We should probably do that. ++ */ ++static void xhci_fixup_endpoint(struct usb_hcd *hcd, struct usb_device *udev, ++ struct usb_host_endpoint *ep, int interval) ++{ ++ struct xhci_hcd *xhci; ++ struct xhci_ep_ctx *ep_ctx_out, *ep_ctx_in; ++ struct xhci_command *command; ++ struct xhci_input_control_ctx *ctrl_ctx; ++ struct xhci_virt_device *vdev; ++ int xhci_interval; ++ int ret; ++ int ep_index; ++ unsigned long flags; ++ u32 ep_info_tmp; ++ ++ xhci = hcd_to_xhci(hcd); ++ ep_index = xhci_get_endpoint_index(&ep->desc); ++ ++ /* FS/LS interval translations */ ++ if ((udev->speed == USB_SPEED_FULL || ++ udev->speed == USB_SPEED_LOW)) ++ interval *= 8; ++ ++ mutex_lock(&xhci->mutex); ++ ++ spin_lock_irqsave(&xhci->lock, flags); ++ ++ vdev = xhci->devs[udev->slot_id]; ++ /* Get context-derived endpoint interval */ ++ ep_ctx_out = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index); ++ ep_ctx_in = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index); ++ xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx_out->ep_info)); ++ ++ if (interval == xhci_interval) { ++ spin_unlock_irqrestore(&xhci->lock, flags); ++ mutex_unlock(&xhci->mutex); ++ return; ++ } ++ ++ xhci_dbg(xhci, "Fixup interval=%d xhci_interval=%d\n", ++ interval, xhci_interval); ++ command = xhci_alloc_command_with_ctx(xhci, true, GFP_ATOMIC); ++ if (!command) { ++ /* Failure here is benign, poll at the original rate */ ++ spin_unlock_irqrestore(&xhci->lock, flags); ++ mutex_unlock(&xhci->mutex); ++ return; ++ } ++ ++ /* xHCI uses exponents for intervals... */ ++ xhci_interval = fls(interval) - 1; ++ xhci_interval = clamp_val(xhci_interval, 3, 10); ++ ep_info_tmp = le32_to_cpu(ep_ctx_out->ep_info); ++ ep_info_tmp &= ~EP_INTERVAL(255); ++ ep_info_tmp |= EP_INTERVAL(xhci_interval); ++ ++ /* Keep the endpoint context up-to-date while issuing the command. */ ++ xhci_endpoint_copy(xhci, vdev->in_ctx, ++ vdev->out_ctx, ep_index); ++ ep_ctx_in->ep_info = cpu_to_le32(ep_info_tmp); ++ ++ /* ++ * We need to drop the lock, so take an explicit copy ++ * of the ep context. ++ */ ++ xhci_endpoint_copy(xhci, command->in_ctx, vdev->in_ctx, ep_index); ++ ++ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); ++ if (!ctrl_ctx) { ++ xhci_warn(xhci, ++ "%s: Could not get input context, bad type.\n", ++ __func__); ++ spin_unlock_irqrestore(&xhci->lock, flags); ++ xhci_free_command(xhci, command); ++ mutex_unlock(&xhci->mutex); ++ return; ++ } ++ ctrl_ctx->add_flags = xhci_get_endpoint_flag_from_index(ep_index); ++ ctrl_ctx->drop_flags = 0; ++ ++ spin_unlock_irqrestore(&xhci->lock, flags); ++ ++ ret = xhci_configure_endpoint(xhci, udev, command, ++ false, false); ++ if (ret) ++ xhci_warn(xhci, "%s: Configure endpoint failed: %d\n", ++ __func__, ret); ++ xhci_free_command(xhci, command); ++ mutex_unlock(&xhci->mutex); ++} ++ ++/* + * non-error returns are a promise to giveback() the urb later + * we drop ownership so next owner (or urb unlink) can get it + */ +@@ -5217,6 +5314,7 @@ static const struct hc_driver xhci_hc_dr + .endpoint_reset = xhci_endpoint_reset, + .check_bandwidth = xhci_check_bandwidth, + .reset_bandwidth = xhci_reset_bandwidth, ++ .fixup_endpoint = xhci_fixup_endpoint, + .address_device = xhci_address_device, + .enable_device = xhci_enable_device, + .update_hub_device = xhci_update_hub_device, diff --git a/target/linux/brcm2708/patches-4.19/950-0603-drm-vc4-Iterate-over-all-planes-in-vc4_crtc_-dis-en-.patch b/target/linux/brcm2708/patches-4.19/950-0603-drm-vc4-Iterate-over-all-planes-in-vc4_crtc_-dis-en-.patch deleted file mode 100644 index d7b3a50c54..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0603-drm-vc4-Iterate-over-all-planes-in-vc4_crtc_-dis-en-.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 501dabdd480e2da1b3b1395b5ebf9d5306fec689 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 10 Apr 2019 17:42:37 +0100 -Subject: [PATCH 603/806] drm: vc4: Iterate over all planes in - vc4_crtc_[dis|en]able - -Fixes a FIXME where the overlay plane wouldn't be restored. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 20 +++++++++++--------- - 1 file changed, 11 insertions(+), 9 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -598,6 +598,8 @@ static void vc4_crtc_mode_set_nofb(struc - - static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { -+ struct drm_plane *plane; -+ - drm_crtc_vblank_off(crtc); - - /* Always turn the planes off on CRTC disable. In DRM, planes -@@ -607,23 +609,23 @@ static void vc4_crtc_disable(struct drm_ - * give us a CRTC-level control for that. - */ - -- vc4_plane_atomic_disable(crtc->cursor, crtc->cursor->state); -- vc4_plane_atomic_disable(crtc->primary, crtc->primary->state); -- -- /* FIXME: Disable overlay planes */ -+ drm_atomic_crtc_for_each_plane(plane, crtc) -+ vc4_plane_atomic_disable(plane, plane->state); - } - - static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { -+ struct drm_plane *plane; -+ - drm_crtc_vblank_on(crtc); -+ - /* Unblank the planes (if they're supposed to be displayed). */ -+ drm_atomic_crtc_for_each_plane(plane, crtc) -+ if (plane->state->fb) -+ vc4_plane_set_blank(plane, plane->state->visible); -+} - -- if (crtc->primary->state->fb) -- vc4_plane_set_blank(crtc->primary, false); -- if (crtc->cursor->state->fb) -- vc4_plane_set_blank(crtc->cursor, crtc->cursor->state); - -- /* FIXME: Enable overlay planes */ - } - - static int vc4_crtc_atomic_check(struct drm_crtc *crtc, diff --git a/target/linux/brcm2708/patches-4.19/950-0603-usbhid-call-usb_fixup_endpoint-after-mangling-interv.patch b/target/linux/brcm2708/patches-4.19/950-0603-usbhid-call-usb_fixup_endpoint-after-mangling-interv.patch new file mode 100644 index 0000000000..59263196c8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0603-usbhid-call-usb_fixup_endpoint-after-mangling-interv.patch @@ -0,0 +1,23 @@ +From f2c46d48d1aa0f7b87b179434162eac6624122f7 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Tue, 11 Jun 2019 11:42:03 +0100 +Subject: [PATCH] usbhid: call usb_fixup_endpoint after mangling + intervals + +Lets the mousepoll override mechanism work with xhci. + +Signed-off-by: Jonathan Bell +--- + drivers/hid/usbhid/hid-core.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/hid/usbhid/hid-core.c ++++ b/drivers/hid/usbhid/hid-core.c +@@ -1118,6 +1118,7 @@ static int usbhid_start(struct hid_devic + interval = hid_kbpoll_interval; + break; + } ++ usb_fixup_endpoint(dev, endpoint->bEndpointAddress, interval); + + ret = -ENOMEM; + if (usb_endpoint_dir_in(endpoint)) { diff --git a/target/linux/brcm2708/patches-4.19/950-0604-drm-vc4-Add-status-of-which-display-is-updated-throu.patch b/target/linux/brcm2708/patches-4.19/950-0604-drm-vc4-Add-status-of-which-display-is-updated-throu.patch new file mode 100644 index 0000000000..dd5b284ccd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0604-drm-vc4-Add-status-of-which-display-is-updated-throu.patch @@ -0,0 +1,85 @@ +From 77ae227664bc2460a5341be765044d0b8fb184ac Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 4 Jun 2019 12:14:30 +0100 +Subject: [PATCH] drm: vc4: Add status of which display is updated + through vblank + +Previously multiple displays were slaved off the same SMI +interrupt, triggered by HVS channel 1 (HDMI0). +This doesn't work if you only have a DPI or DSI screen (HVS channel +0), and gives slightly erroneous results with dual HDMI as the +events for HDMI1 are incorrect. + +Use SMIDSW0 and SMIDSW1 registers to denote which display has +triggered the vblank. +Handling should be backwards compatible with older firmware. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 41 ++++++++++++++++++++++---- + 1 file changed, 36 insertions(+), 5 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -230,8 +230,13 @@ static const struct vc_image_format *vc4 + * hardware, which has only this one register. + */ + #define SMICS 0x0 ++#define SMIDSW0 0x14 ++#define SMIDSW1 0x1C + #define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) + ++/* Flag to denote that the firmware is giving multiple display callbacks */ ++#define SMI_NEW 0xabcd0000 ++ + #define vc4_crtc vc4_kms_crtc + #define to_vc4_crtc to_vc4_kms_crtc + struct vc4_crtc { +@@ -884,16 +889,42 @@ static irqreturn_t vc4_crtc_irq_handler( + int i; + u32 stat = readl(crtc_list[0]->regs + SMICS); + irqreturn_t ret = IRQ_NONE; ++ u32 chan; + + if (stat & SMICS_INTERRUPTS) { + writel(0, crtc_list[0]->regs + SMICS); + +- for (i = 0; crtc_list[i]; i++) { +- if (crtc_list[i]->vblank_enabled) +- drm_crtc_handle_vblank(&crtc_list[i]->base); +- vc4_crtc_handle_page_flip(crtc_list[i]); +- ret = IRQ_HANDLED; ++ chan = readl(crtc_list[0]->regs + SMIDSW0); ++ ++ if ((chan & 0xFFFF0000) != SMI_NEW) { ++ /* Older firmware. Treat the one interrupt as vblank/ ++ * complete for all crtcs. ++ */ ++ for (i = 0; crtc_list[i]; i++) { ++ if (crtc_list[i]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[i]->base); ++ vc4_crtc_handle_page_flip(crtc_list[i]); ++ } ++ } else { ++ if (chan & 1) { ++ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW0); ++ if (crtc_list[0]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[0]->base); ++ vc4_crtc_handle_page_flip(crtc_list[0]); ++ } ++ ++ /* Check for the secondary display too */ ++ chan = readl(crtc_list[0]->regs + SMIDSW1); ++ ++ if (chan & 1) { ++ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW1); ++ if (crtc_list[1]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[1]->base); ++ vc4_crtc_handle_page_flip(crtc_list[1]); ++ } + } ++ ++ ret = IRQ_HANDLED; + } + + return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0604-drm-vc4-Bring-fkms-into-line-with-kms-in-blocking-do.patch b/target/linux/brcm2708/patches-4.19/950-0604-drm-vc4-Bring-fkms-into-line-with-kms-in-blocking-do.patch deleted file mode 100644 index 8ced2a2b2d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0604-drm-vc4-Bring-fkms-into-line-with-kms-in-blocking-do.patch +++ /dev/null @@ -1,47 +0,0 @@ -From d4df2766945e0410d1975434f34e647e7e13b992 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 10 Apr 2019 17:43:57 +0100 -Subject: [PATCH 604/806] drm: vc4: Bring fkms into line with kms in blocking - doublescan modes - -Implement vc4_crtc_mode_valid so that it blocks doublescan modes - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +++++++++++++-- - 1 file changed, 13 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -625,7 +625,17 @@ static void vc4_crtc_enable(struct drm_c - vc4_plane_set_blank(plane, plane->state->visible); - } - -+static enum drm_mode_status -+vc4_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode) -+{ -+ /* Do not allow doublescan modes from user space */ -+ if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { -+ DRM_DEBUG_KMS("[CRTC:%d] Doublescan mode rejected.\n", -+ crtc->base.id); -+ return MODE_NO_DBLESCAN; -+ } - -+ return MODE_OK; - } - - static int vc4_crtc_atomic_check(struct drm_crtc *crtc, -@@ -735,10 +745,11 @@ static const struct drm_crtc_funcs vc4_c - - static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { - .mode_set_nofb = vc4_crtc_mode_set_nofb, -- .atomic_disable = vc4_crtc_disable, -- .atomic_enable = vc4_crtc_enable, -+ .mode_valid = vc4_crtc_mode_valid, - .atomic_check = vc4_crtc_atomic_check, - .atomic_flush = vc4_crtc_atomic_flush, -+ .atomic_enable = vc4_crtc_enable, -+ .atomic_disable = vc4_crtc_disable, - }; - - static const struct of_device_id vc4_firmware_kms_dt_match[] = { diff --git a/target/linux/brcm2708/patches-4.19/950-0605-drm-vc4-In-FKMS-look-at-the-modifiers-correctly-for-.patch b/target/linux/brcm2708/patches-4.19/950-0605-drm-vc4-In-FKMS-look-at-the-modifiers-correctly-for-.patch new file mode 100644 index 0000000000..a72f1420df --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0605-drm-vc4-In-FKMS-look-at-the-modifiers-correctly-for-.patch @@ -0,0 +1,36 @@ +From 5643e47700d3c1b2a8a1aca56629f12e90df407c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 12 Jun 2019 17:13:21 +0100 +Subject: [PATCH] drm/vc4: In FKMS look at the modifiers correctly for + SAND + +Incorrect masking was used in the switch for the modifier, +therefore for SAND (which puts the column pitch in the +modifier) it didn't match. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -460,7 +460,7 @@ static void vc4_plane_atomic_update(stru + } + mb->plane.planes[3] = 0; + +- switch (fb->modifier) { ++ switch (fourcc_mod_broadcom_mod(fb->modifier)) { + case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: + switch (mb->plane.vc_image_type) { + case VC_IMAGE_XRGB8888: +@@ -476,6 +476,9 @@ static void vc4_plane_atomic_update(stru + break; + case DRM_FORMAT_MOD_BROADCOM_SAND128: + mb->plane.vc_image_type = VC_IMAGE_YUV_UV; ++ /* Note that the column pitch is passed across in lines, not ++ * bytes. ++ */ + mb->plane.pitch = fourcc_mod_broadcom_param(fb->modifier); + break; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0605-drm-vc4-Increase-max_width-height-to-7680.patch b/target/linux/brcm2708/patches-4.19/950-0605-drm-vc4-Increase-max_width-height-to-7680.patch deleted file mode 100644 index 3f05bc1138..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0605-drm-vc4-Increase-max_width-height-to-7680.patch +++ /dev/null @@ -1,27 +0,0 @@ -From b4ed0c4f55542b642f16ee6376b69968d6bafc3b Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 29 Apr 2019 18:45:00 +0100 -Subject: [PATCH 605/806] drm: vc4: Increase max_width/height to 7680. - -There are some limits still being investigated that stop -us going up to 8192, but 7680 is sufficient for dual 4k -displays. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_kms.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_kms.c -@@ -429,8 +429,8 @@ int vc4_kms_load(struct drm_device *dev) - return ret; - } - -- dev->mode_config.max_width = 4096; -- dev->mode_config.max_height = 4096; -+ dev->mode_config.max_width = 7680; -+ dev->mode_config.max_height = 7680; - dev->mode_config.funcs = &vc4_mode_funcs; - dev->mode_config.preferred_depth = 24; - dev->mode_config.async_page_flip = true; diff --git a/target/linux/brcm2708/patches-4.19/950-0606-arm-dts-Fix-Pi4-PWR-LED-configuration.patch b/target/linux/brcm2708/patches-4.19/950-0606-arm-dts-Fix-Pi4-PWR-LED-configuration.patch new file mode 100644 index 0000000000..34772d59b1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0606-arm-dts-Fix-Pi4-PWR-LED-configuration.patch @@ -0,0 +1,29 @@ +From 4d4d714061ee6f54dc5feeaeda4389e2346386aa Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 17 Jun 2019 10:06:55 +0100 +Subject: [PATCH] arm: dts: Fix Pi4 PWR LED configuration + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -126,13 +126,13 @@ + act_led: act { + label = "led0"; + linux,default-trigger = "mmc0"; +- gpios = <&gpio 42 0>; ++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + pwr_led: pwr { + label = "led1"; +- linux,default-trigger = "input"; +- gpios = <&expgpio 2 0>; ++ linux,default-trigger = "default-on"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0606-drm-vc4-FKMS-reads-the-EDID-from-fw-and-supports-mod.patch b/target/linux/brcm2708/patches-4.19/950-0606-drm-vc4-FKMS-reads-the-EDID-from-fw-and-supports-mod.patch deleted file mode 100644 index b56f97005d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0606-drm-vc4-FKMS-reads-the-EDID-from-fw-and-supports-mod.patch +++ /dev/null @@ -1,557 +0,0 @@ -From 9536044338d9c341e805e288a58090c49a793638 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 9 Apr 2019 18:23:41 +0100 -Subject: [PATCH 606/806] drm: vc4: FKMS reads the EDID from fw, and supports - mode setting - -This extends FKMS to read the EDID from the display, and support -requesting a particular mode via KMS. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 334 ++++++++++++++++++--- - include/soc/bcm2835/raspberrypi-firmware.h | 2 + - 2 files changed, 302 insertions(+), 34 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -88,11 +88,60 @@ struct mailbox_blank_display { - u32 blank; - }; - --struct mailbox_get_width_height { -+struct mailbox_get_edid { - struct rpi_firmware_property_tag_header tag1; -- u32 display; -- struct rpi_firmware_property_tag_header tag2; -- u32 wh[2]; -+ u32 block; -+ u32 display_number; -+ u8 edid[128]; -+}; -+ -+struct set_timings { -+ u8 display; -+ u8 padding; -+ u16 video_id_code; -+ -+ u32 clock; /* in kHz */ -+ -+ u16 hdisplay; -+ u16 hsync_start; -+ -+ u16 hsync_end; -+ u16 htotal; -+ -+ u16 hskew; -+ u16 vdisplay; -+ -+ u16 vsync_start; -+ u16 vsync_end; -+ -+ u16 vtotal; -+ u16 vscan; -+ -+ u16 vrefresh; -+ u16 padding2; -+ -+ u32 flags; -+#define TIMINGS_FLAGS_H_SYNC_POS BIT(0) -+#define TIMINGS_FLAGS_H_SYNC_NEG 0 -+#define TIMINGS_FLAGS_V_SYNC_POS BIT(1) -+#define TIMINGS_FLAGS_V_SYNC_NEG 0 -+ -+#define TIMINGS_FLAGS_ASPECT_MASK GENMASK(7, 4) -+#define TIMINGS_FLAGS_ASPECT_NONE (0 << 4) -+#define TIMINGS_FLAGS_ASPECT_4_3 (1 << 4) -+#define TIMINGS_FLAGS_ASPECT_16_9 (2 << 4) -+#define TIMINGS_FLAGS_ASPECT_64_27 (3 << 4) -+#define TIMINGS_FLAGS_ASPECT_256_135 (4 << 4) -+ -+/* Limited range RGB flag. Not set corresponds to full range. */ -+#define TIMINGS_FLAGS_RGB_LIMITED BIT(8) -+/* DVI monitor, therefore disable infoframes. Not set corresponds to HDMI. */ -+#define TIMINGS_FLAGS_DVI BIT(9) -+}; -+ -+struct mailbox_set_mode { -+ struct rpi_firmware_property_tag_header tag1; -+ struct set_timings timings; - }; - - static const struct vc_image_format { -@@ -186,6 +235,7 @@ struct vc4_crtc { - u32 overscan[4]; - bool vblank_enabled; - u32 display_number; -+ u32 display_type; - }; - - static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) -@@ -195,6 +245,8 @@ static inline struct vc4_crtc *to_vc4_cr - - struct vc4_fkms_encoder { - struct drm_encoder base; -+ bool hdmi_monitor; -+ bool rgb_range_selectable; - }; - - static inline struct vc4_fkms_encoder * -@@ -212,7 +264,9 @@ struct vc4_fkms_connector { - * hook. - */ - struct drm_encoder *encoder; -- u32 display_idx; -+ struct vc4_dev *vc4_dev; -+ u32 display_number; -+ u32 display_type; - }; - - static inline struct vc4_fkms_connector * -@@ -221,6 +275,26 @@ to_vc4_fkms_connector(struct drm_connect - return container_of(connector, struct vc4_fkms_connector, base); - } - -+static u32 vc4_get_display_type(u32 display_number) -+{ -+ const u32 display_types[] = { -+ /* The firmware display (DispmanX) IDs map to specific types in -+ * a fixed manner. -+ */ -+ DRM_MODE_ENCODER_DSI, /* MAIN_LCD */ -+ DRM_MODE_ENCODER_DSI, /* AUX_LCD */ -+ DRM_MODE_ENCODER_TMDS, /* HDMI0 */ -+ DRM_MODE_ENCODER_TVDAC, /* VEC */ -+ DRM_MODE_ENCODER_NONE, /* FORCE_LCD */ -+ DRM_MODE_ENCODER_NONE, /* FORCE_TV */ -+ DRM_MODE_ENCODER_NONE, /* FORCE_OTHER */ -+ DRM_MODE_ENCODER_TMDS, /* HDMI1 */ -+ DRM_MODE_ENCODER_NONE, /* FORCE_TV2 */ -+ }; -+ return display_number > ARRAY_SIZE(display_types) - 1 ? -+ DRM_MODE_ENCODER_NONE : display_types[display_number]; -+} -+ - /* Firmware's structure for making an FB mbox call. */ - struct fbinfo_s { - u32 xres, yres, xres_virtual, yres_virtual; -@@ -255,10 +329,15 @@ static int vc4_plane_set_blank(struct dr - .plane_id = vc4_plane->mb.plane.plane_id, - } - }; -+ static const char * const plane_types[] = { -+ "overlay", -+ "primary", -+ "cursor" -+ }; - int ret; - -- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] overlay plane %s", -- plane->base.id, plane->name, -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] %s plane %s", -+ plane->base.id, plane->name, plane_types[plane->type], - blank ? "blank" : "unblank"); - - if (blank) -@@ -593,13 +672,102 @@ fail: - - static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) - { -- /* Everyting is handled in the planes. */ -+ struct drm_device *dev = crtc->dev; -+ struct vc4_dev *vc4 = to_vc4_dev(dev); -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ struct drm_display_mode *mode = &crtc->state->adjusted_mode; -+ struct vc4_fkms_encoder *vc4_encoder = -+ to_vc4_fkms_encoder(vc4_crtc->encoder); -+ struct mailbox_set_mode mb = { -+ .tag1 = { RPI_FIRMWARE_SET_TIMING, -+ sizeof(struct set_timings), 0}, -+ }; -+ union hdmi_infoframe frame; -+ int ret; -+ -+ ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode, false); -+ if (ret < 0) { -+ DRM_ERROR("couldn't fill AVI infoframe\n"); -+ return; -+ } -+ -+ DRM_DEBUG_KMS("Setting mode for display num %u mode name %s, clk %d, h(disp %d, start %d, end %d, total %d, skew %d) v(disp %d, start %d, end %d, total %d, scan %d), vrefresh %d, par %u\n", -+ vc4_crtc->display_number, mode->name, mode->clock, -+ mode->hdisplay, mode->hsync_start, mode->hsync_end, -+ mode->htotal, mode->hskew, mode->vdisplay, -+ mode->vsync_start, mode->vsync_end, mode->vtotal, -+ mode->vscan, mode->vrefresh, mode->picture_aspect_ratio); -+ mb.timings.display = vc4_crtc->display_number; -+ -+ mb.timings.video_id_code = frame.avi.video_code; -+ -+ mb.timings.clock = mode->clock; -+ mb.timings.hdisplay = mode->hdisplay; -+ mb.timings.hsync_start = mode->hsync_start; -+ mb.timings.hsync_end = mode->hsync_end; -+ mb.timings.htotal = mode->htotal; -+ mb.timings.hskew = mode->hskew; -+ mb.timings.vdisplay = mode->vdisplay; -+ mb.timings.vsync_start = mode->vsync_start; -+ mb.timings.vsync_end = mode->vsync_end; -+ mb.timings.vtotal = mode->vtotal; -+ mb.timings.vscan = mode->vscan; -+ mb.timings.vrefresh = 0; -+ mb.timings.flags = 0; -+ if (mode->flags & DRM_MODE_FLAG_PHSYNC) -+ mb.timings.flags |= TIMINGS_FLAGS_H_SYNC_POS; -+ if (mode->flags & DRM_MODE_FLAG_PVSYNC) -+ mb.timings.flags |= TIMINGS_FLAGS_V_SYNC_POS; -+ -+ switch (frame.avi.picture_aspect) { -+ default: -+ case HDMI_PICTURE_ASPECT_NONE: -+ mode->flags |= TIMINGS_FLAGS_ASPECT_NONE; -+ break; -+ case HDMI_PICTURE_ASPECT_4_3: -+ mode->flags |= TIMINGS_FLAGS_ASPECT_4_3; -+ break; -+ case HDMI_PICTURE_ASPECT_16_9: -+ mode->flags |= TIMINGS_FLAGS_ASPECT_16_9; -+ break; -+ case HDMI_PICTURE_ASPECT_64_27: -+ mode->flags |= TIMINGS_FLAGS_ASPECT_64_27; -+ break; -+ case HDMI_PICTURE_ASPECT_256_135: -+ mode->flags |= TIMINGS_FLAGS_ASPECT_256_135; -+ break; -+ } -+ -+ if (!vc4_encoder->hdmi_monitor) -+ mb.timings.flags |= TIMINGS_FLAGS_DVI; -+ else if (drm_default_rgb_quant_range(mode) == -+ HDMI_QUANTIZATION_RANGE_LIMITED) -+ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; -+ -+ /* -+ FIXME: To implement -+ switch(mode->flag & DRM_MODE_FLAG_3D_MASK) { -+ case DRM_MODE_FLAG_3D_NONE: -+ case DRM_MODE_FLAG_3D_FRAME_PACKING: -+ case DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: -+ case DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: -+ case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: -+ case DRM_MODE_FLAG_3D_L_DEPTH: -+ case DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: -+ case DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: -+ case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: -+ } -+ */ -+ -+ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); - } - - static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { - struct drm_plane *plane; - -+ DRM_DEBUG_KMS("[CRTC:%d] vblanks off.\n", -+ crtc->base.id); - drm_crtc_vblank_off(crtc); - - /* Always turn the planes off on CRTC disable. In DRM, planes -@@ -617,6 +785,8 @@ static void vc4_crtc_enable(struct drm_c - { - struct drm_plane *plane; - -+ DRM_DEBUG_KMS("[CRTC:%d] vblanks on.\n", -+ crtc->base.id); - drm_crtc_vblank_on(crtc); - - /* Unblank the planes (if they're supposed to be displayed). */ -@@ -635,12 +805,20 @@ vc4_crtc_mode_valid(struct drm_crtc *crt - return MODE_NO_DBLESCAN; - } - -+ /* Limit the pixel clock until we can get dynamic HDMI 2.0 scrambling -+ * working. -+ */ -+ if (mode->clock > 340000) -+ return MODE_CLOCK_HIGH; -+ - return MODE_OK; - } - - static int vc4_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *state) - { -+ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", -+ crtc->base.id); - return 0; - } - -@@ -650,6 +828,8 @@ static void vc4_crtc_atomic_flush(struct - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); - struct drm_device *dev = crtc->dev; - -+ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_flush.\n", -+ crtc->base.id); - if (crtc->state->event) { - unsigned long flags; - -@@ -717,6 +897,8 @@ static int vc4_fkms_enable_vblank(struct - { - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); - -+ DRM_DEBUG_KMS("[CRTC:%d] enable_vblank.\n", -+ crtc->base.id); - vc4_crtc->vblank_enabled = true; - - return 0; -@@ -726,6 +908,8 @@ static void vc4_fkms_disable_vblank(stru - { - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); - -+ DRM_DEBUG_KMS("[CRTC:%d] disable_vblank.\n", -+ crtc->base.id); - vc4_crtc->vblank_enabled = false; - } - -@@ -760,36 +944,92 @@ static const struct of_device_id vc4_fir - static enum drm_connector_status - vc4_fkms_connector_detect(struct drm_connector *connector, bool force) - { -+ DRM_DEBUG_KMS("connector detect.\n"); - return connector_status_connected; - } - --static int vc4_fkms_connector_get_modes(struct drm_connector *connector) -+static int vc4_fkms_get_edid_block(void *data, u8 *buf, unsigned int block, -+ size_t len) - { -- struct drm_device *dev = connector->dev; - struct vc4_fkms_connector *fkms_connector = -- to_vc4_fkms_connector(connector); -- struct vc4_dev *vc4 = to_vc4_dev(dev); -- struct drm_display_mode *mode; -- struct mailbox_get_width_height wh = { -- .tag1 = {RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, 4, 0, }, -- .display = fkms_connector->display_idx, -- .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, -- 8, 0, }, -+ (struct vc4_fkms_connector *)data; -+ struct vc4_dev *vc4 = fkms_connector->vc4_dev; -+ struct mailbox_get_edid mb = { -+ .tag1 = { RPI_FIRMWARE_GET_EDID_BLOCK_DISPLAY, -+ 128 + 8, 0 }, -+ .block = block, -+ .display_number = fkms_connector->display_number, - }; -- int ret; -+ int ret = 0; -+ -+ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); -+ -+ if (!ret) -+ memcpy(buf, mb.edid, len); -+ -+ return ret; -+} -+ -+static int vc4_fkms_connector_get_modes(struct drm_connector *connector) -+{ -+ struct vc4_fkms_connector *fkms_connector = -+ to_vc4_fkms_connector(connector); -+ struct drm_encoder *encoder = fkms_connector->encoder; -+ struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); -+ int ret = 0; -+ struct edid *edid; -+ -+ edid = drm_do_get_edid(connector, vc4_fkms_get_edid_block, -+ fkms_connector); -+ -+ /* FIXME: Can we do CEC? -+ * cec_s_phys_addr_from_edid(vc4->hdmi->cec_adap, edid); -+ * if (!edid) -+ * return -ENODEV; -+ */ -+ -+ vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid); - -- ret = rpi_firmware_property_list(vc4->firmware, &wh, sizeof(wh)); -+ if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { -+ vc4_encoder->rgb_range_selectable = -+ drm_rgb_quant_range_selectable(edid); -+ } -+ -+ drm_connector_update_edid_property(connector, edid); -+ ret = drm_add_edid_modes(connector, edid); -+ kfree(edid); -+ -+ return ret; -+} -+ -+/* FIXME: Read LCD mode from the firmware. This is the DSI panel resolution. */ -+static const struct drm_display_mode lcd_mode = { -+ DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, -+ 25979400 / 1000, -+ 800, 800 + 1, 800 + 1 + 2, 800 + 1 + 2 + 46, 0, -+ 480, 480 + 7, 480 + 7 + 2, 480 + 7 + 2 + 21, 0, -+ DRM_MODE_FLAG_INTERLACE) -+}; -+ -+static int vc4_fkms_lcd_connector_get_modes(struct drm_connector *connector) -+{ -+ //struct vc4_fkms_connector *fkms_connector = -+ // to_vc4_fkms_connector(connector); -+ //struct drm_encoder *encoder = fkms_connector->encoder; -+ //struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); -+ struct drm_display_mode *mode; -+ //int ret = 0; - -- if (ret) { -- DRM_ERROR("Failed to get screen size: %d (0x%08x 0x%08x)\n", -- ret, wh.wh[0], wh.wh[1]); -- return 0; -+ mode = drm_mode_duplicate(connector->dev, -+ &lcd_mode); -+ if (!mode) { -+ DRM_ERROR("Failed to create a new display mode\n"); -+ return -ENOMEM; - } - -- mode = drm_cvt_mode(dev, wh.wh[0], wh.wh[1], 60 /* vrefresh */, -- 0, 0, false); - drm_mode_probed_add(connector, mode); - -+ /* We have one mode */ - return 1; - } - -@@ -798,11 +1038,14 @@ vc4_fkms_connector_best_encoder(struct d - { - struct vc4_fkms_connector *fkms_connector = - to_vc4_fkms_connector(connector); -+ DRM_DEBUG_KMS("best_connector.\n"); - return fkms_connector->encoder; - } - - static void vc4_fkms_connector_destroy(struct drm_connector *connector) - { -+ DRM_DEBUG_KMS("[CONNECTOR:%d] destroy.\n", -+ connector->base.id); - drm_connector_unregister(connector); - drm_connector_cleanup(connector); - } -@@ -821,14 +1064,22 @@ static const struct drm_connector_helper - .best_encoder = vc4_fkms_connector_best_encoder, - }; - -+static const struct drm_connector_helper_funcs vc4_fkms_lcd_conn_helper_funcs = { -+ .get_modes = vc4_fkms_lcd_connector_get_modes, -+ .best_encoder = vc4_fkms_connector_best_encoder, -+}; -+ - static struct drm_connector * - vc4_fkms_connector_init(struct drm_device *dev, struct drm_encoder *encoder, -- u32 display_idx) -+ u32 display_num) - { - struct drm_connector *connector = NULL; - struct vc4_fkms_connector *fkms_connector; -+ struct vc4_dev *vc4_dev = to_vc4_dev(dev); - int ret = 0; - -+ DRM_DEBUG_KMS("connector_init, display_num %u\n", display_num); -+ - fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), - GFP_KERNEL); - if (!fkms_connector) { -@@ -838,11 +1089,21 @@ vc4_fkms_connector_init(struct drm_devic - connector = &fkms_connector->base; - - fkms_connector->encoder = encoder; -- fkms_connector->display_idx = display_idx; -- -- drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, -- DRM_MODE_CONNECTOR_HDMIA); -- drm_connector_helper_add(connector, &vc4_fkms_connector_helper_funcs); -+ fkms_connector->display_number = display_num; -+ fkms_connector->display_type = vc4_get_display_type(display_num); -+ fkms_connector->vc4_dev = vc4_dev; -+ -+ if (fkms_connector->display_type == DRM_MODE_ENCODER_DSI) { -+ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, -+ DRM_MODE_CONNECTOR_DSI); -+ drm_connector_helper_add(connector, -+ &vc4_fkms_lcd_conn_helper_funcs); -+ } else { -+ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, -+ DRM_MODE_CONNECTOR_HDMIA); -+ drm_connector_helper_add(connector, -+ &vc4_fkms_connector_helper_funcs); -+ } - - connector->polled = (DRM_CONNECTOR_POLL_CONNECT | - DRM_CONNECTOR_POLL_DISCONNECT); -@@ -863,6 +1124,7 @@ vc4_fkms_connector_init(struct drm_devic - - static void vc4_fkms_encoder_destroy(struct drm_encoder *encoder) - { -+ DRM_DEBUG_KMS("Encoder_destroy\n"); - drm_encoder_cleanup(encoder); - } - -@@ -872,10 +1134,12 @@ static const struct drm_encoder_funcs vc - - static void vc4_fkms_encoder_enable(struct drm_encoder *encoder) - { -+ DRM_DEBUG_KMS("Encoder_enable\n"); - } - - static void vc4_fkms_encoder_disable(struct drm_encoder *encoder) - { -+ DRM_DEBUG_KMS("Encoder_disable\n"); - } - - static const struct drm_encoder_helper_funcs vc4_fkms_encoder_helper_funcs = { -@@ -907,6 +1171,7 @@ static int vc4_fkms_create_screen(struct - crtc = &vc4_crtc->base; - - vc4_crtc->display_number = display_ref; -+ vc4_crtc->display_type = vc4_get_display_type(display_ref); - - /* Blank the firmware provided framebuffer */ - rpi_firmware_property_list(vc4->firmware, &blank, sizeof(blank)); -@@ -950,13 +1215,14 @@ static int vc4_fkms_create_screen(struct - return -ENOMEM; - vc4_crtc->encoder = &vc4_encoder->base; - vc4_encoder->base.possible_crtcs |= drm_crtc_mask(crtc) ; -+ - drm_encoder_init(drm, &vc4_encoder->base, &vc4_fkms_encoder_funcs, -- DRM_MODE_ENCODER_TMDS, NULL); -+ vc4_crtc->display_type, NULL); - drm_encoder_helper_add(&vc4_encoder->base, - &vc4_fkms_encoder_helper_funcs); - - vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base, -- display_idx); -+ display_ref); - if (IS_ERR(vc4_crtc->connector)) { - ret = PTR_ERR(vc4_crtc->connector); - goto err_destroy_encoder; ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -78,6 +78,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, - RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, - RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021, -+ RPI_FIRMWARE_GET_EDID_BLOCK_DISPLAY = 0x00030023, - RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, - RPI_FIRMWARE_GET_THROTTLED = 0x00030046, - RPI_FIRMWARE_GET_CLOCK_MEASURED = 0x00030047, -@@ -150,6 +151,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, - - RPI_FIRMWARE_SET_PLANE = 0x00048015, -+ RPI_FIRMWARE_SET_TIMING = 0x00048017, - - RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, - RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, diff --git a/target/linux/brcm2708/patches-4.19/950-0607-bcm2838.dtsi-Correct-gic400-memory-address-ranges.patch b/target/linux/brcm2708/patches-4.19/950-0607-bcm2838.dtsi-Correct-gic400-memory-address-ranges.patch new file mode 100644 index 0000000000..75999d02a6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0607-bcm2838.dtsi-Correct-gic400-memory-address-ranges.patch @@ -0,0 +1,23 @@ +From 43420c9bb90d4290e02bbcaa40c19e00fb347615 Mon Sep 17 00:00:00 2001 +From: dp111 +Date: Sat, 15 Jun 2019 18:19:50 +0100 +Subject: [PATCH] bcm2838.dtsi : Correct gic400 memory address ranges + +It appears to me the addresses for the gic400 are slightly wrong . See section 3.2 https://static.docs.arm.com/ddi0471/a/DDI0471A_gic400_r0p0_trm.pdf +--- + arch/arm/boot/dts/bcm2838.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/bcm2838.dtsi ++++ b/arch/arm/boot/dts/bcm2838.dtsi +@@ -30,8 +30,8 @@ + compatible = "arm,gic-400"; + reg = <0x40041000 0x1000>, + <0x40042000 0x2000>, +- <0x40046000 0x2000>, +- <0x40048000 0x2000>; ++ <0x40044000 0x2000>, ++ <0x40046000 0x2000>; + }; + + thermal: thermal@7d5d2200 { diff --git a/target/linux/brcm2708/patches-4.19/950-0607-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch b/target/linux/brcm2708/patches-4.19/950-0607-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch deleted file mode 100644 index e47071c0f8..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0607-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch +++ /dev/null @@ -1,53 +0,0 @@ -From bf85b92a97a95161d98874571c520fb1395c5aa2 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 2 May 2019 15:11:05 -0700 -Subject: [PATCH 607/806] clk: bcm2835: Add support for setting leaf clock - rates while running. - -As long as you wait for !BUSY, you can do glitch-free updates of clock -rate while the clock is running. - -Signed-off-by: Eric Anholt ---- - drivers/clk/bcm/clk-bcm2835.c | 22 +++++++++++++--------- - 1 file changed, 13 insertions(+), 9 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1097,15 +1097,19 @@ static int bcm2835_clock_set_rate(struct - - spin_lock(&cprman->regs_lock); - -- /* -- * Setting up frac support -- * -- * In principle it is recommended to stop/start the clock first, -- * but as we set CLK_SET_RATE_GATE during registration of the -- * clock this requirement should be take care of by the -- * clk-framework. -+ ctl = cprman_read(cprman, data->ctl_reg); -+ -+ /* If the clock is running, we have to pause clock generation while -+ * updating the control and div regs. This is glitchless (no clock -+ * signals generated faster than the rate) but each reg access is two -+ * OSC cycles so the clock will slow down for a moment. - */ -- ctl = cprman_read(cprman, data->ctl_reg) & ~CM_FRAC; -+ if (ctl & CM_ENABLE) { -+ cprman_write(cprman, data->ctl_reg, ctl & ~CM_ENABLE); -+ bcm2835_clock_wait_busy(clock); -+ } -+ -+ ctl &= ~CM_FRAC; - ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0; - cprman_write(cprman, data->ctl_reg, ctl); - -@@ -1475,7 +1479,7 @@ static struct clk_hw *bcm2835_register_c - init.ops = &bcm2835_vpu_clock_clk_ops; - } else { - init.ops = &bcm2835_clock_clk_ops; -- init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE; -+ init.flags |= CLK_SET_PARENT_GATE; - - /* If the clock wasn't actually enabled at boot, it's not - * critical. diff --git a/target/linux/brcm2708/patches-4.19/950-0608-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch b/target/linux/brcm2708/patches-4.19/950-0608-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch deleted file mode 100644 index 71b7b07b30..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0608-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch +++ /dev/null @@ -1,71 +0,0 @@ -From d46285327ba5961c992643d468b2862c70f4c7e5 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 2 May 2019 15:24:04 -0700 -Subject: [PATCH 608/806] clk: bcm2835: Allow reparenting leaf clocks while - they're running. - -This falls under the same "we can reprogram glitch-free as long as we -pause generation" rule as updating the div/frac fields. This can be -used for runtime reclocking of V3D to manage power leakage. - -Signed-off-by: Eric Anholt ---- - drivers/clk/bcm/clk-bcm2835.c | 19 ++++++++++++++++--- - 1 file changed, 16 insertions(+), 3 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1086,8 +1086,10 @@ static int bcm2835_clock_on(struct clk_h - return 0; - } - --static int bcm2835_clock_set_rate(struct clk_hw *hw, -- unsigned long rate, unsigned long parent_rate) -+static int bcm2835_clock_set_rate_and_parent(struct clk_hw *hw, -+ unsigned long rate, -+ unsigned long parent_rate, -+ u8 parent) - { - struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); - struct bcm2835_cprman *cprman = clock->cprman; -@@ -1109,6 +1111,11 @@ static int bcm2835_clock_set_rate(struct - bcm2835_clock_wait_busy(clock); - } - -+ if (parent != 0xff) { -+ ctl &= ~(CM_SRC_MASK << CM_SRC_SHIFT); -+ ctl |= parent << CM_SRC_SHIFT; -+ } -+ - ctl &= ~CM_FRAC; - ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0; - cprman_write(cprman, data->ctl_reg, ctl); -@@ -1120,6 +1127,12 @@ static int bcm2835_clock_set_rate(struct - return 0; - } - -+static int bcm2835_clock_set_rate(struct clk_hw *hw, -+ unsigned long rate, unsigned long parent_rate) -+{ -+ return bcm2835_clock_set_rate_and_parent(hw, rate, parent_rate, 0xff); -+} -+ - static bool - bcm2835_clk_is_pllc(struct clk_hw *hw) - { -@@ -1303,6 +1316,7 @@ static const struct clk_ops bcm2835_cloc - .unprepare = bcm2835_clock_off, - .recalc_rate = bcm2835_clock_get_rate, - .set_rate = bcm2835_clock_set_rate, -+ .set_rate_and_parent = bcm2835_clock_set_rate_and_parent, - .determine_rate = bcm2835_clock_determine_rate, - .set_parent = bcm2835_clock_set_parent, - .get_parent = bcm2835_clock_get_parent, -@@ -1479,7 +1493,6 @@ static struct clk_hw *bcm2835_register_c - init.ops = &bcm2835_vpu_clock_clk_ops; - } else { - init.ops = &bcm2835_clock_clk_ops; -- init.flags |= CLK_SET_PARENT_GATE; - - /* If the clock wasn't actually enabled at boot, it's not - * critical. diff --git a/target/linux/brcm2708/patches-4.19/950-0608-staging-vchiq-Use-the-old-dma-controller-for-OF-conf.patch b/target/linux/brcm2708/patches-4.19/950-0608-staging-vchiq-Use-the-old-dma-controller-for-OF-conf.patch new file mode 100644 index 0000000000..808fdaf0ca --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0608-staging-vchiq-Use-the-old-dma-controller-for-OF-conf.patch @@ -0,0 +1,51 @@ +From 65a5b304668ed6cb4568ac1a0ffbeabb28208b38 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 18 Jun 2019 12:15:50 +0100 +Subject: [PATCH] staging: vchiq: Use the old dma controller for OF + config on platform devices + +vchiq on Pi4 is no longer under the soc node, therefore it +doesn't get the dma-ranges for the VPU. + +Switch to using the configuration of the old dma controller as +that will set the dma-ranges correctly. + +Signed-off-by: Dave Stevenson +--- + .../interface/vchiq_arm/vchiq_arm.c | 17 ++++++++++++++--- + 1 file changed, 14 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -3599,6 +3599,7 @@ vchiq_register_child(struct platform_dev + { + struct platform_device_info pdevinfo; + struct platform_device *new_dev; ++ struct device_node *np; + + memset(&pdevinfo, 0, sizeof(pdevinfo)); + +@@ -3612,10 +3613,20 @@ vchiq_register_child(struct platform_dev + return NULL; + + /* +- * We want the dma-ranges etc to be copied from the parent VCHIQ device +- * to be passed on to the children too. ++ * We want the dma-ranges etc to be copied from a device with the ++ * correct dma-ranges for the VPU. ++ * VCHIQ on Pi4 is now under scb which doesn't get those dma-ranges. ++ * Take the "dma" node as going to be suitable as it sees the world ++ * through the same eyes as the VPU. + */ +- of_dma_configure(&new_dev->dev, pdev->dev.of_node, true); ++ np = of_find_node_by_path("dma"); ++ if (!np) ++ np = pdev->dev.of_node; ++ ++ of_dma_configure(&new_dev->dev, np, true); ++ ++ if (np != pdev->dev.of_node) ++ of_node_put(np); + + return new_dev; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0609-drm-v3d-Add-support-for-compute-shader-dispatch.patch b/target/linux/brcm2708/patches-4.19/950-0609-drm-v3d-Add-support-for-compute-shader-dispatch.patch deleted file mode 100644 index dc230621dc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0609-drm-v3d-Add-support-for-compute-shader-dispatch.patch +++ /dev/null @@ -1,897 +0,0 @@ -From 22dbf1420a552d1952d22b92d8c30f8162b026b5 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Tue, 16 Apr 2019 15:58:54 -0700 -Subject: [PATCH 609/806] drm/v3d: Add support for compute shader dispatch. - -The compute shader dispatch interface is pretty simple -- just pass in -the regs that userspace has passed us, with no CLs to run. However, -with no CL to run it means that we need to do manual cache flushing of -the L2 after the HW execution completes (for SSBO, atomic, and -image_load_store writes that are the output of compute shaders). - -This doesn't yet expose the L2 cache's ability to have a region of the -address space not write back to memory (which could be used for -shared_var storage). - -So far, the Mesa side has been tested on V3D v4.2 simpenrose (passing -the ES31 tests), and on the kernel side on 7278 (failing atomic -compswap tests in a way that doesn't reproduce on simpenrose). - -v2: Fix excessive allocation for the clean_job (reported by Dan - Carpenter). Keep refs on jobs until clean_job is finished, to - avoid spurious MMU errors if the output BOs are freed by userspace - before L2 cleaning is finished. - -Signed-off-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-4-eric@anholt.net -Acked-by: Rob Clark ---- - drivers/gpu/drm/v3d/v3d_debugfs.c | 22 +++++ - drivers/gpu/drm/v3d/v3d_drv.c | 10 +- - drivers/gpu/drm/v3d/v3d_drv.h | 28 +++++- - drivers/gpu/drm/v3d/v3d_fence.c | 2 + - drivers/gpu/drm/v3d/v3d_gem.c | 156 +++++++++++++++++++++++++++++- - drivers/gpu/drm/v3d/v3d_irq.c | 16 ++- - drivers/gpu/drm/v3d/v3d_regs.h | 73 ++++++++++++++ - drivers/gpu/drm/v3d/v3d_sched.c | 121 +++++++++++++++++++++-- - drivers/gpu/drm/v3d/v3d_trace.h | 94 ++++++++++++++++++ - include/uapi/drm/v3d_drm.h | 28 ++++++ - 10 files changed, 531 insertions(+), 19 deletions(-) - ---- a/drivers/gpu/drm/v3d/v3d_debugfs.c -+++ b/drivers/gpu/drm/v3d/v3d_debugfs.c -@@ -57,6 +57,17 @@ static const struct v3d_reg_def v3d_core - REGDEF(V3D_GMP_VIO_ADDR), - }; - -+static const struct v3d_reg_def v3d_csd_reg_defs[] = { -+ REGDEF(V3D_CSD_STATUS), -+ REGDEF(V3D_CSD_CURRENT_CFG0), -+ REGDEF(V3D_CSD_CURRENT_CFG1), -+ REGDEF(V3D_CSD_CURRENT_CFG2), -+ REGDEF(V3D_CSD_CURRENT_CFG3), -+ REGDEF(V3D_CSD_CURRENT_CFG4), -+ REGDEF(V3D_CSD_CURRENT_CFG5), -+ REGDEF(V3D_CSD_CURRENT_CFG6), -+}; -+ - static int v3d_v3d_debugfs_regs(struct seq_file *m, void *unused) - { - struct drm_info_node *node = (struct drm_info_node *)m->private; -@@ -88,6 +99,17 @@ static int v3d_v3d_debugfs_regs(struct s - V3D_CORE_READ(core, - v3d_core_reg_defs[i].reg)); - } -+ -+ if (v3d_has_csd(v3d)) { -+ for (i = 0; i < ARRAY_SIZE(v3d_csd_reg_defs); i++) { -+ seq_printf(m, "core %d %s (0x%04x): 0x%08x\n", -+ core, -+ v3d_csd_reg_defs[i].name, -+ v3d_csd_reg_defs[i].reg, -+ V3D_CORE_READ(core, -+ v3d_csd_reg_defs[i].reg)); -+ } -+ } - } - - return 0; ---- a/drivers/gpu/drm/v3d/v3d_drv.c -+++ b/drivers/gpu/drm/v3d/v3d_drv.c -@@ -7,9 +7,9 @@ - * This driver supports the Broadcom V3D 3.3 and 4.1 OpenGL ES GPUs. - * For V3D 2.x support, see the VC4 driver. - * -- * Currently only single-core rendering using the binner and renderer, -- * along with TFU (texture formatting unit) rendering is supported. -- * V3D 4.x's CSD (compute shader dispatch) is not yet supported. -+ * The V3D GPU includes a tiled render (composed of a bin and render -+ * pipelines), the TFU (texture formatting unit), and the CSD (compute -+ * shader dispatch). - */ - - #include -@@ -114,6 +114,9 @@ static int v3d_get_param_ioctl(struct dr - case DRM_V3D_PARAM_SUPPORTS_TFU: - args->value = 1; - return 0; -+ case DRM_V3D_PARAM_SUPPORTS_CSD: -+ args->value = v3d_has_csd(v3d); -+ return 0; - default: - DRM_DEBUG("Unknown parameter %d\n", args->param); - return -EINVAL; -@@ -183,6 +186,7 @@ static const struct drm_ioctl_desc v3d_d - DRM_IOCTL_DEF_DRV(V3D_GET_PARAM, v3d_get_param_ioctl, DRM_RENDER_ALLOW), - DRM_IOCTL_DEF_DRV(V3D_GET_BO_OFFSET, v3d_get_bo_offset_ioctl, DRM_RENDER_ALLOW), - DRM_IOCTL_DEF_DRV(V3D_SUBMIT_TFU, v3d_submit_tfu_ioctl, DRM_RENDER_ALLOW | DRM_AUTH), -+ DRM_IOCTL_DEF_DRV(V3D_SUBMIT_CSD, v3d_submit_csd_ioctl, DRM_RENDER_ALLOW | DRM_AUTH), - }; - - static const struct vm_operations_struct v3d_vm_ops = { ---- a/drivers/gpu/drm/v3d/v3d_drv.h -+++ b/drivers/gpu/drm/v3d/v3d_drv.h -@@ -16,9 +16,11 @@ enum v3d_queue { - V3D_BIN, - V3D_RENDER, - V3D_TFU, -+ V3D_CSD, -+ V3D_CACHE_CLEAN, - }; - --#define V3D_MAX_QUEUES (V3D_TFU + 1) -+#define V3D_MAX_QUEUES (V3D_CACHE_CLEAN + 1) - - struct v3d_queue_state { - struct drm_gpu_scheduler sched; -@@ -70,6 +72,7 @@ struct v3d_dev { - struct v3d_bin_job *bin_job; - struct v3d_render_job *render_job; - struct v3d_tfu_job *tfu_job; -+ struct v3d_csd_job *csd_job; - - struct v3d_queue_state queue[V3D_MAX_QUEUES]; - -@@ -92,6 +95,12 @@ struct v3d_dev { - */ - struct mutex sched_lock; - -+ /* Lock taken during a cache clean and when initiating an L2 -+ * flush, to keep L2 flushes from interfering with the -+ * synchronous L2 cleans. -+ */ -+ struct mutex cache_clean_lock; -+ - struct { - u32 num_allocated; - u32 pages_allocated; -@@ -104,6 +113,12 @@ to_v3d_dev(struct drm_device *dev) - return (struct v3d_dev *)dev->dev_private; - } - -+static inline bool -+v3d_has_csd(struct v3d_dev *v3d) -+{ -+ return v3d->ver >= 41; -+} -+ - /* The per-fd struct, which tracks the MMU mappings. */ - struct v3d_file_priv { - struct v3d_dev *v3d; -@@ -237,6 +252,14 @@ struct v3d_tfu_job { - struct drm_v3d_submit_tfu args; - }; - -+struct v3d_csd_job { -+ struct v3d_job base; -+ -+ u32 timedout_batches; -+ -+ struct drm_v3d_submit_csd args; -+}; -+ - /** - * _wait_for - magic (register) wait macro - * -@@ -302,11 +325,14 @@ int v3d_submit_cl_ioctl(struct drm_devic - struct drm_file *file_priv); - int v3d_submit_tfu_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -+int v3d_submit_csd_ioctl(struct drm_device *dev, void *data, -+ struct drm_file *file_priv); - int v3d_wait_bo_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); - void v3d_job_put(struct v3d_job *job); - void v3d_reset(struct v3d_dev *v3d); - void v3d_invalidate_caches(struct v3d_dev *v3d); -+void v3d_clean_caches(struct v3d_dev *v3d); - - /* v3d_irq.c */ - int v3d_irq_init(struct v3d_dev *v3d); ---- a/drivers/gpu/drm/v3d/v3d_fence.c -+++ b/drivers/gpu/drm/v3d/v3d_fence.c -@@ -36,6 +36,8 @@ static const char *v3d_fence_get_timelin - return "v3d-render"; - case V3D_TFU: - return "v3d-tfu"; -+ case V3D_CSD: -+ return "v3d-csd"; - default: - return NULL; - } ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -162,10 +162,52 @@ v3d_flush_l2t(struct v3d_dev *v3d, int c - /* While there is a busy bit (V3D_L2TCACTL_L2TFLS), we don't - * need to wait for completion before dispatching the job -- - * L2T accesses will be stalled until the flush has completed. -+ * However, we do need to make sure we don't try to trigger a -+ * new flush while the L2_CLEAN queue is trying to -+ * synchronously clean after a job. - */ -+ mutex_lock(&v3d->cache_clean_lock); - V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, - V3D_L2TCACTL_L2TFLS | - V3D_SET_FIELD(V3D_L2TCACTL_FLM_FLUSH, V3D_L2TCACTL_FLM)); -+ mutex_unlock(&v3d->cache_clean_lock); -+} -+ -+/* Cleans texture L1 and L2 cachelines (writing back dirty data). -+ * -+ * For cleaning, which happens from the CACHE_CLEAN queue after CSD has -+ * executed, we need to make sure that the clean is done before -+ * signaling job completion. So, we synchronously wait before -+ * returning, and we make sure that L2 invalidates don't happen in the -+ * meantime to confuse our are-we-done checks. -+ */ -+void -+v3d_clean_caches(struct v3d_dev *v3d) -+{ -+ struct drm_device *dev = &v3d->drm; -+ int core = 0; -+ -+ trace_v3d_cache_clean_begin(dev); -+ -+ V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, V3D_L2TCACTL_TMUWCF); -+ if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & -+ V3D_L2TCACTL_L2TFLS), 100)) { -+ DRM_ERROR("Timeout waiting for L1T write combiner flush\n"); -+ } -+ -+ mutex_lock(&v3d->cache_clean_lock); -+ V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, -+ V3D_L2TCACTL_L2TFLS | -+ V3D_SET_FIELD(V3D_L2TCACTL_FLM_CLEAN, V3D_L2TCACTL_FLM)); -+ -+ if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) & -+ V3D_L2TCACTL_L2TFLS), 100)) { -+ DRM_ERROR("Timeout waiting for L2T clean\n"); -+ } -+ -+ mutex_unlock(&v3d->cache_clean_lock); -+ -+ trace_v3d_cache_clean_end(dev); - } - - /* Invalidates the slice caches. These are read-only caches. */ -@@ -584,7 +626,8 @@ static void - v3d_attach_fences_and_unlock_reservation(struct drm_file *file_priv, - struct v3d_job *job, - struct ww_acquire_ctx *acquire_ctx, -- u32 out_sync) -+ u32 out_sync, -+ struct dma_fence *done_fence) - { - struct drm_syncobj *sync_out; - -@@ -594,7 +637,7 @@ v3d_attach_fences_and_unlock_reservation - /* Update the return sync object for the job */ - sync_out = drm_syncobj_find(file_priv, out_sync); - if (sync_out) { -- drm_syncobj_replace_fence(sync_out, job->done_fence); -+ drm_syncobj_replace_fence(sync_out, done_fence); - drm_syncobj_put(sync_out); - } - } -@@ -691,8 +734,10 @@ v3d_submit_cl_ioctl(struct drm_device *d - mutex_unlock(&v3d->sched_lock); - - v3d_attach_fences_and_unlock_reservation(file_priv, -- &render->base, &acquire_ctx, -- args->out_sync); -+ &render->base, -+ &acquire_ctx, -+ args->out_sync, -+ render->base.done_fence); - - if (bin) - v3d_job_put(&bin->base); -@@ -785,7 +830,8 @@ v3d_submit_tfu_ioctl(struct drm_device * - - v3d_attach_fences_and_unlock_reservation(file_priv, - &job->base, &acquire_ctx, -- args->out_sync); -+ args->out_sync, -+ job->base.done_fence); - - v3d_job_put(&job->base); - -@@ -801,6 +847,105 @@ fail: - return ret; - } - -+/** -+ * v3d_submit_csd_ioctl() - Submits a CSD (texture formatting) job to the V3D. -+ * @dev: DRM device -+ * @data: ioctl argument -+ * @file_priv: DRM file for this fd -+ * -+ * Userspace provides the register setup for the CSD, which we don't -+ * need to validate since the CSD is behind the MMU. -+ */ -+int -+v3d_submit_csd_ioctl(struct drm_device *dev, void *data, -+ struct drm_file *file_priv) -+{ -+ struct v3d_dev *v3d = to_v3d_dev(dev); -+ struct v3d_file_priv *v3d_priv = file_priv->driver_priv; -+ struct drm_v3d_submit_csd *args = data; -+ struct v3d_csd_job *job; -+ struct v3d_job *clean_job; -+ struct ww_acquire_ctx acquire_ctx; -+ int ret; -+ -+ trace_v3d_submit_csd_ioctl(&v3d->drm, args->cfg[5], args->cfg[6]); -+ -+ if (!v3d_has_csd(v3d)) { -+ DRM_DEBUG("Attempting CSD submit on non-CSD hardware\n"); -+ return -EINVAL; -+ } -+ -+ job = kcalloc(1, sizeof(*job), GFP_KERNEL); -+ if (!job) -+ return -ENOMEM; -+ -+ ret = v3d_job_init(v3d, file_priv, &job->base, -+ v3d_job_free, args->in_sync); -+ if (ret) { -+ kfree(job); -+ return ret; -+ } -+ -+ clean_job = kcalloc(1, sizeof(*clean_job), GFP_KERNEL); -+ if (!clean_job) { -+ v3d_job_put(&job->base); -+ kfree(job); -+ return -ENOMEM; -+ } -+ -+ ret = v3d_job_init(v3d, file_priv, clean_job, v3d_job_free, 0); -+ if (ret) { -+ v3d_job_put(&job->base); -+ kfree(clean_job); -+ return ret; -+ } -+ -+ job->args = *args; -+ -+ ret = v3d_lookup_bos(dev, file_priv, clean_job, -+ args->bo_handles, args->bo_handle_count); -+ if (ret) -+ goto fail; -+ -+ ret = v3d_lock_bo_reservations(clean_job, &acquire_ctx); -+ if (ret) -+ goto fail; -+ -+ mutex_lock(&v3d->sched_lock); -+ ret = v3d_push_job(v3d_priv, &job->base, V3D_CSD); -+ if (ret) -+ goto fail_unreserve; -+ -+ ret = v3d_add_dep(clean_job, dma_fence_get(job->base.done_fence)); -+ if (ret) -+ goto fail_unreserve; -+ ret = v3d_push_job(v3d_priv, clean_job, V3D_CACHE_CLEAN); -+ if (ret) -+ goto fail_unreserve; -+ mutex_unlock(&v3d->sched_lock); -+ -+ v3d_attach_fences_and_unlock_reservation(file_priv, -+ clean_job, -+ &acquire_ctx, -+ args->out_sync, -+ clean_job->done_fence); -+ -+ v3d_job_put(&job->base); -+ v3d_job_put(clean_job); -+ -+ return 0; -+ -+fail_unreserve: -+ mutex_unlock(&v3d->sched_lock); -+ v3d_unlock_bo_reservations(clean_job->bo, clean_job->bo_count, -+ &acquire_ctx); -+fail: -+ v3d_job_put(&job->base); -+ v3d_job_put(clean_job); -+ -+ return ret; -+} -+ - int - v3d_gem_init(struct drm_device *dev) - { -@@ -816,6 +961,7 @@ v3d_gem_init(struct drm_device *dev) - mutex_init(&v3d->bo_lock); - mutex_init(&v3d->reset_lock); - mutex_init(&v3d->sched_lock); -+ mutex_init(&v3d->cache_clean_lock); - - /* Note: We don't allocate address 0. Various bits of HW - * treat 0 as special, such as the occlusion query counters ---- a/drivers/gpu/drm/v3d/v3d_irq.c -+++ b/drivers/gpu/drm/v3d/v3d_irq.c -@@ -4,9 +4,9 @@ - /** - * DOC: Interrupt management for the V3D engine - * -- * When we take a bin, render, or TFU done interrupt, we need to -- * signal the fence for that job so that the scheduler can queue up -- * the next one and unblock any waiters. -+ * When we take a bin, render, TFU done, or CSD done interrupt, we -+ * need to signal the fence for that job so that the scheduler can -+ * queue up the next one and unblock any waiters. - * - * When we take the binner out of memory interrupt, we need to - * allocate some new memory and pass it to the binner so that the -@@ -20,6 +20,7 @@ - #define V3D_CORE_IRQS ((u32)(V3D_INT_OUTOMEM | \ - V3D_INT_FLDONE | \ - V3D_INT_FRDONE | \ -+ V3D_INT_CSDDONE | \ - V3D_INT_GMPV)) - - #define V3D_HUB_IRQS ((u32)(V3D_HUB_INT_MMU_WRV | \ -@@ -108,6 +109,15 @@ v3d_irq(int irq, void *arg) - dma_fence_signal(&fence->base); - status = IRQ_HANDLED; - } -+ -+ if (intsts & V3D_INT_CSDDONE) { -+ struct v3d_fence *fence = -+ to_v3d_fence(v3d->csd_job->base.irq_fence); -+ -+ trace_v3d_csd_irq(&v3d->drm, fence->seqno); -+ dma_fence_signal(&fence->base); -+ status = IRQ_HANDLED; -+ } - - /* We shouldn't be triggering these if we have GMP in - * always-allowed mode. ---- a/drivers/gpu/drm/v3d/v3d_regs.h -+++ b/drivers/gpu/drm/v3d/v3d_regs.h -@@ -238,8 +238,11 @@ - #define V3D_CTL_L2TCACTL 0x00030 - # define V3D_L2TCACTL_TMUWCF BIT(8) - # define V3D_L2TCACTL_L2T_NO_WM BIT(4) -+/* Invalidates cache lines. */ - # define V3D_L2TCACTL_FLM_FLUSH 0 -+/* Removes cachelines without writing dirty lines back. */ - # define V3D_L2TCACTL_FLM_CLEAR 1 -+/* Writes out dirty cachelines and marks them clean, but doesn't invalidate. */ - # define V3D_L2TCACTL_FLM_CLEAN 2 - # define V3D_L2TCACTL_FLM_MASK V3D_MASK(2, 1) - # define V3D_L2TCACTL_FLM_SHIFT 1 -@@ -255,6 +258,8 @@ - #define V3D_CTL_INT_MSK_CLR 0x00064 - # define V3D_INT_QPU_MASK V3D_MASK(27, 16) - # define V3D_INT_QPU_SHIFT 16 -+# define V3D_INT_CSDDONE BIT(7) -+# define V3D_INT_PCTR BIT(6) - # define V3D_INT_GMPV BIT(5) - # define V3D_INT_TRFB BIT(4) - # define V3D_INT_SPILLUSE BIT(3) -@@ -374,4 +379,72 @@ - #define V3D_GMP_PRESERVE_LOAD 0x00818 - #define V3D_GMP_VALID_LINES 0x00820 - -+#define V3D_CSD_STATUS 0x00900 -+# define V3D_CSD_STATUS_NUM_COMPLETED_MASK V3D_MASK(11, 4) -+# define V3D_CSD_STATUS_NUM_COMPLETED_SHIFT 4 -+# define V3D_CSD_STATUS_NUM_ACTIVE_MASK V3D_MASK(3, 2) -+# define V3D_CSD_STATUS_NUM_ACTIVE_SHIFT 2 -+# define V3D_CSD_STATUS_HAVE_CURRENT_DISPATCH BIT(1) -+# define V3D_CSD_STATUS_HAVE_QUEUED_DISPATCH BIT(0) -+ -+#define V3D_CSD_QUEUED_CFG0 0x00904 -+# define V3D_CSD_QUEUED_CFG0_NUM_WGS_X_MASK V3D_MASK(31, 16) -+# define V3D_CSD_QUEUED_CFG0_NUM_WGS_X_SHIFT 16 -+# define V3D_CSD_QUEUED_CFG0_WG_X_OFFSET_MASK V3D_MASK(15, 0) -+# define V3D_CSD_QUEUED_CFG0_WG_X_OFFSET_SHIFT 0 -+ -+#define V3D_CSD_QUEUED_CFG1 0x00908 -+# define V3D_CSD_QUEUED_CFG1_NUM_WGS_Y_MASK V3D_MASK(31, 16) -+# define V3D_CSD_QUEUED_CFG1_NUM_WGS_Y_SHIFT 16 -+# define V3D_CSD_QUEUED_CFG1_WG_Y_OFFSET_MASK V3D_MASK(15, 0) -+# define V3D_CSD_QUEUED_CFG1_WG_Y_OFFSET_SHIFT 0 -+ -+#define V3D_CSD_QUEUED_CFG2 0x0090c -+# define V3D_CSD_QUEUED_CFG2_NUM_WGS_Z_MASK V3D_MASK(31, 16) -+# define V3D_CSD_QUEUED_CFG2_NUM_WGS_Z_SHIFT 16 -+# define V3D_CSD_QUEUED_CFG2_WG_Z_OFFSET_MASK V3D_MASK(15, 0) -+# define V3D_CSD_QUEUED_CFG2_WG_Z_OFFSET_SHIFT 0 -+ -+#define V3D_CSD_QUEUED_CFG3 0x00910 -+# define V3D_CSD_QUEUED_CFG3_OVERLAP_WITH_PREV BIT(26) -+# define V3D_CSD_QUEUED_CFG3_MAX_SG_ID_MASK V3D_MASK(25, 20) -+# define V3D_CSD_QUEUED_CFG3_MAX_SG_ID_SHIFT 20 -+# define V3D_CSD_QUEUED_CFG3_BATCHES_PER_SG_M1_MASK V3D_MASK(19, 12) -+# define V3D_CSD_QUEUED_CFG3_BATCHES_PER_SG_M1_SHIFT 12 -+# define V3D_CSD_QUEUED_CFG3_WGS_PER_SG_MASK V3D_MASK(11, 8) -+# define V3D_CSD_QUEUED_CFG3_WGS_PER_SG_SHIFT 8 -+# define V3D_CSD_QUEUED_CFG3_WG_SIZE_MASK V3D_MASK(7, 0) -+# define V3D_CSD_QUEUED_CFG3_WG_SIZE_SHIFT 0 -+ -+/* Number of batches, minus 1 */ -+#define V3D_CSD_QUEUED_CFG4 0x00914 -+ -+/* Shader address, pnan, singleseg, threading, like a shader record. */ -+#define V3D_CSD_QUEUED_CFG5 0x00918 -+ -+/* Uniforms address (4 byte aligned) */ -+#define V3D_CSD_QUEUED_CFG6 0x0091c -+ -+#define V3D_CSD_CURRENT_CFG0 0x00920 -+#define V3D_CSD_CURRENT_CFG1 0x00924 -+#define V3D_CSD_CURRENT_CFG2 0x00928 -+#define V3D_CSD_CURRENT_CFG3 0x0092c -+#define V3D_CSD_CURRENT_CFG4 0x00930 -+#define V3D_CSD_CURRENT_CFG5 0x00934 -+#define V3D_CSD_CURRENT_CFG6 0x00938 -+ -+#define V3D_CSD_CURRENT_ID0 0x0093c -+# define V3D_CSD_CURRENT_ID0_WG_X_MASK V3D_MASK(31, 16) -+# define V3D_CSD_CURRENT_ID0_WG_X_SHIFT 16 -+# define V3D_CSD_CURRENT_ID0_WG_IN_SG_MASK V3D_MASK(11, 8) -+# define V3D_CSD_CURRENT_ID0_WG_IN_SG_SHIFT 8 -+# define V3D_CSD_CURRENT_ID0_L_IDX_MASK V3D_MASK(7, 0) -+# define V3D_CSD_CURRENT_ID0_L_IDX_SHIFT 0 -+ -+#define V3D_CSD_CURRENT_ID1 0x00940 -+# define V3D_CSD_CURRENT_ID0_WG_Z_MASK V3D_MASK(31, 16) -+# define V3D_CSD_CURRENT_ID0_WG_Z_SHIFT 16 -+# define V3D_CSD_CURRENT_ID0_WG_Y_MASK V3D_MASK(15, 0) -+# define V3D_CSD_CURRENT_ID0_WG_Y_SHIFT 0 -+ - #endif /* V3D_REGS_H */ ---- a/drivers/gpu/drm/v3d/v3d_sched.c -+++ b/drivers/gpu/drm/v3d/v3d_sched.c -@@ -48,6 +48,12 @@ to_tfu_job(struct drm_sched_job *sched_j - return container_of(sched_job, struct v3d_tfu_job, base.base); - } - -+static struct v3d_csd_job * -+to_csd_job(struct drm_sched_job *sched_job) -+{ -+ return container_of(sched_job, struct v3d_csd_job, base.base); -+} -+ - static void - v3d_job_free(struct drm_sched_job *sched_job) - { -@@ -205,6 +211,48 @@ v3d_tfu_job_run(struct drm_sched_job *sc - return fence; - } - -+static struct dma_fence * -+v3d_csd_job_run(struct drm_sched_job *sched_job) -+{ -+ struct v3d_csd_job *job = to_csd_job(sched_job); -+ struct v3d_dev *v3d = job->base.v3d; -+ struct drm_device *dev = &v3d->drm; -+ struct dma_fence *fence; -+ int i; -+ -+ v3d->csd_job = job; -+ -+ v3d_invalidate_caches(v3d); -+ -+ fence = v3d_fence_create(v3d, V3D_CSD); -+ if (IS_ERR(fence)) -+ return NULL; -+ -+ if (job->base.irq_fence) -+ dma_fence_put(job->base.irq_fence); -+ job->base.irq_fence = dma_fence_get(fence); -+ -+ trace_v3d_submit_csd(dev, to_v3d_fence(fence)->seqno); -+ -+ for (i = 1; i <= 6; i++) -+ V3D_CORE_WRITE(0, V3D_CSD_QUEUED_CFG0 + 4 * i, job->args.cfg[i]); -+ /* CFG0 write kicks off the job. */ -+ V3D_CORE_WRITE(0, V3D_CSD_QUEUED_CFG0, job->args.cfg[0]); -+ -+ return fence; -+} -+ -+static struct dma_fence * -+v3d_cache_clean_job_run(struct drm_sched_job *sched_job) -+{ -+ struct v3d_job *job = to_v3d_job(sched_job); -+ struct v3d_dev *v3d = job->v3d; -+ -+ v3d_clean_caches(v3d); -+ -+ return NULL; -+} -+ - static void - v3d_gpu_reset_for_timeout(struct v3d_dev *v3d, struct drm_sched_job *sched_job) - { -@@ -277,13 +325,31 @@ v3d_render_job_timedout(struct drm_sched - } - - static void --v3d_tfu_job_timedout(struct drm_sched_job *sched_job) -+v3d_generic_job_timedout(struct drm_sched_job *sched_job) - { - struct v3d_job *job = to_v3d_job(sched_job); - - v3d_gpu_reset_for_timeout(job->v3d, sched_job); - } - -+static void -+v3d_csd_job_timedout(struct drm_sched_job *sched_job) -+{ -+ struct v3d_csd_job *job = to_csd_job(sched_job); -+ struct v3d_dev *v3d = job->base.v3d; -+ u32 batches = V3D_CORE_READ(0, V3D_CSD_CURRENT_CFG4); -+ -+ /* If we've made progress, skip reset and let the timer get -+ * rearmed. -+ */ -+ if (job->timedout_batches != batches) { -+ job->timedout_batches = batches; -+ return; -+ } -+ -+ v3d_gpu_reset_for_timeout(v3d, sched_job); -+} -+ - static const struct drm_sched_backend_ops v3d_bin_sched_ops = { - .dependency = v3d_job_dependency, - .run_job = v3d_bin_job_run, -@@ -301,10 +367,24 @@ static const struct drm_sched_backend_op - static const struct drm_sched_backend_ops v3d_tfu_sched_ops = { - .dependency = v3d_job_dependency, - .run_job = v3d_tfu_job_run, -- .timedout_job = v3d_tfu_job_timedout, -+ .timedout_job = v3d_generic_job_timedout, - .free_job = v3d_job_free, - }; - -+static const struct drm_sched_backend_ops v3d_csd_sched_ops = { -+ .dependency = v3d_job_dependency, -+ .run_job = v3d_csd_job_run, -+ .timedout_job = v3d_csd_job_timedout, -+ .free_job = v3d_job_free -+}; -+ -+static const struct drm_sched_backend_ops v3d_cache_clean_sched_ops = { -+ .dependency = v3d_job_dependency, -+ .run_job = v3d_cache_clean_job_run, -+ .timedout_job = v3d_generic_job_timedout, -+ .free_job = v3d_job_free -+}; -+ - int - v3d_sched_init(struct v3d_dev *v3d) - { -@@ -331,7 +411,7 @@ v3d_sched_init(struct v3d_dev *v3d) - if (ret) { - dev_err(v3d->dev, "Failed to create render scheduler: %d.", - ret); -- drm_sched_fini(&v3d->queue[V3D_BIN].sched); -+ v3d_sched_fini(v3d); - return ret; - } - -@@ -343,11 +423,36 @@ v3d_sched_init(struct v3d_dev *v3d) - if (ret) { - dev_err(v3d->dev, "Failed to create TFU scheduler: %d.", - ret); -- drm_sched_fini(&v3d->queue[V3D_RENDER].sched); -- drm_sched_fini(&v3d->queue[V3D_BIN].sched); -+ v3d_sched_fini(v3d); - return ret; - } - -+ if (v3d_has_csd(v3d)) { -+ ret = drm_sched_init(&v3d->queue[V3D_CSD].sched, -+ &v3d_csd_sched_ops, -+ hw_jobs_limit, job_hang_limit, -+ msecs_to_jiffies(hang_limit_ms), -+ "v3d_csd"); -+ if (ret) { -+ dev_err(v3d->dev, "Failed to create CSD scheduler: %d.", -+ ret); -+ v3d_sched_fini(v3d); -+ return ret; -+ } -+ -+ ret = drm_sched_init(&v3d->queue[V3D_CACHE_CLEAN].sched, -+ &v3d_cache_clean_sched_ops, -+ hw_jobs_limit, job_hang_limit, -+ msecs_to_jiffies(hang_limit_ms), -+ "v3d_cache_clean"); -+ if (ret) { -+ dev_err(v3d->dev, "Failed to create CACHE_CLEAN scheduler: %d.", -+ ret); -+ v3d_sched_fini(v3d); -+ return ret; -+ } -+ } -+ - return 0; - } - -@@ -356,6 +461,8 @@ v3d_sched_fini(struct v3d_dev *v3d) - { - enum v3d_queue q; - -- for (q = 0; q < V3D_MAX_QUEUES; q++) -- drm_sched_fini(&v3d->queue[q].sched); -+ for (q = 0; q < V3D_MAX_QUEUES; q++) { -+ if (v3d->queue[q].sched.ops) -+ drm_sched_fini(&v3d->queue[q].sched); -+ } - } ---- a/drivers/gpu/drm/v3d/v3d_trace.h -+++ b/drivers/gpu/drm/v3d/v3d_trace.h -@@ -124,6 +124,26 @@ TRACE_EVENT(v3d_tfu_irq, - __entry->seqno) - ); - -+TRACE_EVENT(v3d_csd_irq, -+ TP_PROTO(struct drm_device *dev, -+ uint64_t seqno), -+ TP_ARGS(dev, seqno), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ __field(u64, seqno) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ __entry->seqno = seqno; -+ ), -+ -+ TP_printk("dev=%u, seqno=%llu", -+ __entry->dev, -+ __entry->seqno) -+); -+ - TRACE_EVENT(v3d_submit_tfu_ioctl, - TP_PROTO(struct drm_device *dev, u32 iia), - TP_ARGS(dev, iia), -@@ -163,6 +183,80 @@ TRACE_EVENT(v3d_submit_tfu, - __entry->seqno) - ); - -+TRACE_EVENT(v3d_submit_csd_ioctl, -+ TP_PROTO(struct drm_device *dev, u32 cfg5, u32 cfg6), -+ TP_ARGS(dev, cfg5, cfg6), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ __field(u32, cfg5) -+ __field(u32, cfg6) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ __entry->cfg5 = cfg5; -+ __entry->cfg6 = cfg6; -+ ), -+ -+ TP_printk("dev=%u, CFG5 0x%08x, CFG6 0x%08x", -+ __entry->dev, -+ __entry->cfg5, -+ __entry->cfg6) -+); -+ -+TRACE_EVENT(v3d_submit_csd, -+ TP_PROTO(struct drm_device *dev, -+ uint64_t seqno), -+ TP_ARGS(dev, seqno), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ __field(u64, seqno) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ __entry->seqno = seqno; -+ ), -+ -+ TP_printk("dev=%u, seqno=%llu", -+ __entry->dev, -+ __entry->seqno) -+); -+ -+TRACE_EVENT(v3d_cache_clean_begin, -+ TP_PROTO(struct drm_device *dev), -+ TP_ARGS(dev), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ ), -+ -+ TP_printk("dev=%u", -+ __entry->dev) -+); -+ -+TRACE_EVENT(v3d_cache_clean_end, -+ TP_PROTO(struct drm_device *dev), -+ TP_ARGS(dev), -+ -+ TP_STRUCT__entry( -+ __field(u32, dev) -+ ), -+ -+ TP_fast_assign( -+ __entry->dev = dev->primary->index; -+ ), -+ -+ TP_printk("dev=%u", -+ __entry->dev) -+); -+ - TRACE_EVENT(v3d_reset_begin, - TP_PROTO(struct drm_device *dev), - TP_ARGS(dev), ---- a/include/uapi/drm/v3d_drm.h -+++ b/include/uapi/drm/v3d_drm.h -@@ -37,6 +37,7 @@ extern "C" { - #define DRM_V3D_GET_PARAM 0x04 - #define DRM_V3D_GET_BO_OFFSET 0x05 - #define DRM_V3D_SUBMIT_TFU 0x06 -+#define DRM_V3D_SUBMIT_CSD 0x07 - - #define DRM_IOCTL_V3D_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl) - #define DRM_IOCTL_V3D_WAIT_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo) -@@ -45,6 +46,7 @@ extern "C" { - #define DRM_IOCTL_V3D_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_PARAM, struct drm_v3d_get_param) - #define DRM_IOCTL_V3D_GET_BO_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_BO_OFFSET, struct drm_v3d_get_bo_offset) - #define DRM_IOCTL_V3D_SUBMIT_TFU DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_TFU, struct drm_v3d_submit_tfu) -+#define DRM_IOCTL_V3D_SUBMIT_CSD DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CSD, struct drm_v3d_submit_csd) - - /** - * struct drm_v3d_submit_cl - ioctl argument for submitting commands to the 3D -@@ -172,6 +174,7 @@ enum drm_v3d_param { - DRM_V3D_PARAM_V3D_CORE0_IDENT1, - DRM_V3D_PARAM_V3D_CORE0_IDENT2, - DRM_V3D_PARAM_SUPPORTS_TFU, -+ DRM_V3D_PARAM_SUPPORTS_CSD, - }; - - struct drm_v3d_get_param { -@@ -212,6 +215,31 @@ struct drm_v3d_submit_tfu { - __u32 out_sync; - }; - -+/* Submits a compute shader for dispatch. This job will block on any -+ * previous compute shaders submitted on this fd, and any other -+ * synchronization must be performed with in_sync/out_sync. -+ */ -+struct drm_v3d_submit_csd { -+ __u32 cfg[7]; -+ __u32 coef[4]; -+ -+ /* Pointer to a u32 array of the BOs that are referenced by the job. -+ */ -+ __u64 bo_handles; -+ -+ /* Number of BO handles passed in (size is that times 4). */ -+ __u32 bo_handle_count; -+ -+ /* sync object to block on before running the CSD job. Each -+ * CSD job will execute in the order submitted to its FD. -+ * Synchronization against rendering/TFU jobs or CSD from -+ * other fds requires using sync objects. -+ */ -+ __u32 in_sync; -+ /* Sync object to signal when the CSD job is done. */ -+ __u32 out_sync; -+}; -+ - #if defined(__cplusplus) - } - #endif diff --git a/target/linux/brcm2708/patches-4.19/950-0609-drm-vc4-Limit-fkms-to-modes-85Hz.patch b/target/linux/brcm2708/patches-4.19/950-0609-drm-vc4-Limit-fkms-to-modes-85Hz.patch new file mode 100644 index 0000000000..b95a4db6d3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0609-drm-vc4-Limit-fkms-to-modes-85Hz.patch @@ -0,0 +1,26 @@ +From 06a0e398e7dcd6ba0a61713596c32ec6d43b47c8 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 18 Jun 2019 21:37:45 +0100 +Subject: [PATCH] drm/vc4: Limit fkms to modes <= 85Hz + +Selecting 1080p100 and 120 has very limited gain, but don't want +to block VGA85 and similar. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -822,6 +822,10 @@ vc4_crtc_mode_valid(struct drm_crtc *crt + return MODE_NO_DBLESCAN; + } + ++ /* Disable refresh rates > 85Hz as limited gain from them */ ++ if (drm_mode_vrefresh(mode) > 85) ++ return MODE_BAD_VVALUE; ++ + /* Limit the pixel clock based on the HDMI clock limits from the + * firmware + */ diff --git a/target/linux/brcm2708/patches-4.19/950-0610-arm-bcm2835-Add-bcm2838-compatible-string.patch b/target/linux/brcm2708/patches-4.19/950-0610-arm-bcm2835-Add-bcm2838-compatible-string.patch new file mode 100644 index 0000000000..1099608c75 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0610-arm-bcm2835-Add-bcm2838-compatible-string.patch @@ -0,0 +1,20 @@ +From aca60a3944ff6a4da66e96d9ae54f4bca271b600 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 11 Jun 2019 17:38:28 +0100 +Subject: [PATCH] arm: bcm2835: Add bcm2838 compatible string. + +Signed-off-by: Phil Elwell +--- + arch/arm/mach-bcm/board_bcm2835.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/mach-bcm/board_bcm2835.c ++++ b/arch/arm/mach-bcm/board_bcm2835.c +@@ -118,6 +118,7 @@ static const char * const bcm2835_compat + #ifdef CONFIG_ARCH_MULTI_V7 + "brcm,bcm2836", + "brcm,bcm2837", ++ "brcm,bcm2838", + #endif + NULL + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0610-drm-v3d-Clock-V3D-down-when-not-in-use.patch b/target/linux/brcm2708/patches-4.19/950-0610-drm-v3d-Clock-V3D-down-when-not-in-use.patch deleted file mode 100644 index d44f76cb39..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0610-drm-v3d-Clock-V3D-down-when-not-in-use.patch +++ /dev/null @@ -1,157 +0,0 @@ -From 3e6b687bae81bdf5a430ffaa04aa04ee195a866c Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 2 May 2019 13:22:53 -0700 -Subject: [PATCH 610/806] drm/v3d: Clock V3D down when not in use. - -My various attempts at re-enabling runtime PM have failed, so just -crank the clock down when V3D is idle to reduce power consumption. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/v3d/v3d_drv.c | 18 +++++++++++++ - drivers/gpu/drm/v3d/v3d_drv.h | 6 +++++ - drivers/gpu/drm/v3d/v3d_gem.c | 49 +++++++++++++++++++++++++++++++++++ - 3 files changed, 73 insertions(+) - ---- a/drivers/gpu/drm/v3d/v3d_drv.c -+++ b/drivers/gpu/drm/v3d/v3d_drv.c -@@ -297,6 +297,21 @@ static int v3d_platform_drm_probe(struct - } - } - -+ v3d->clk = devm_clk_get(dev, NULL); -+ if (IS_ERR(v3d->clk)) { -+ if (ret != -EPROBE_DEFER) -+ dev_err(dev, "Failed to get clock\n"); -+ goto dev_free; -+ } -+ v3d->clk_up_rate = clk_get_rate(v3d->clk); -+ /* For downclocking, drop it to the minimum frequency we can get from -+ * the CPRMAN clock generator dividing off our parent. The divider is -+ * 4 bits, but ask for just higher than that so that rounding doesn't -+ * make cprman reject our rate. -+ */ -+ v3d->clk_down_rate = -+ (clk_get_rate(clk_get_parent(v3d->clk)) / (1 << 4)) + 10000; -+ - if (v3d->ver < 41) { - ret = map_regs(v3d, &v3d->gca_regs, "gca"); - if (ret) -@@ -331,6 +346,9 @@ static int v3d_platform_drm_probe(struct - if (ret) - goto irq_disable; - -+ ret = clk_set_rate(v3d->clk, v3d->clk_down_rate); -+ WARN_ON_ONCE(ret != 0); -+ - return 0; - - irq_disable: ---- a/drivers/gpu/drm/v3d/v3d_drv.h -+++ b/drivers/gpu/drm/v3d/v3d_drv.h -@@ -45,6 +45,12 @@ struct v3d_dev { - void __iomem *bridge_regs; - void __iomem *gca_regs; - struct clk *clk; -+ struct delayed_work clk_down_work; -+ unsigned long clk_up_rate, clk_down_rate; -+ struct mutex clk_lock; -+ u32 clk_refcount; -+ bool clk_up; -+ - struct reset_control *reset; - - /* Virtual and DMA addresses of the single shared page table. */ ---- a/drivers/gpu/drm/v3d/v3d_gem.c -+++ b/drivers/gpu/drm/v3d/v3d_gem.c -@@ -3,6 +3,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -17,6 +18,47 @@ - #include "v3d_trace.h" - - static void -+v3d_clock_down_work(struct work_struct *work) -+{ -+ struct v3d_dev *v3d = -+ container_of(work, struct v3d_dev, clk_down_work.work); -+ int ret; -+ -+ ret = clk_set_rate(v3d->clk, v3d->clk_down_rate); -+ v3d->clk_up = false; -+ WARN_ON_ONCE(ret != 0); -+} -+ -+static void -+v3d_clock_up_get(struct v3d_dev *v3d) -+{ -+ mutex_lock(&v3d->clk_lock); -+ if (v3d->clk_refcount++ == 0) { -+ cancel_delayed_work_sync(&v3d->clk_down_work); -+ if (!v3d->clk_up) { -+ int ret; -+ -+ ret = clk_set_rate(v3d->clk, v3d->clk_up_rate); -+ WARN_ON_ONCE(ret != 0); -+ v3d->clk_up = true; -+ } -+ } -+ mutex_unlock(&v3d->clk_lock); -+} -+ -+static void -+v3d_clock_up_put(struct v3d_dev *v3d) -+{ -+ mutex_lock(&v3d->clk_lock); -+ if (--v3d->clk_refcount == 0) { -+ schedule_delayed_work(&v3d->clk_down_work, -+ msecs_to_jiffies(100)); -+ } -+ mutex_unlock(&v3d->clk_lock); -+} -+ -+ -+static void - v3d_init_core(struct v3d_dev *v3d, int core) - { - /* Set OVRTMUOUT, which means that the texture sampler uniform -@@ -490,6 +532,7 @@ static void - v3d_job_free(struct kref *ref) - { - struct v3d_job *job = container_of(ref, struct v3d_job, refcount); -+ struct v3d_dev *v3d = job->v3d; - int i; - - for (i = 0; i < job->bo_count; i++) { -@@ -505,6 +548,8 @@ v3d_job_free(struct kref *ref) - dma_fence_put(job->irq_fence); - dma_fence_put(job->done_fence); - -+ v3d_clock_up_put(v3d); -+ - kfree(job); - } - -@@ -596,6 +641,7 @@ v3d_job_init(struct v3d_dev *v3d, struct - if (ret) - return ret; - -+ v3d_clock_up_get(v3d); - kref_init(&job->refcount); - - return 0; -@@ -963,6 +1009,9 @@ v3d_gem_init(struct drm_device *dev) - mutex_init(&v3d->sched_lock); - mutex_init(&v3d->cache_clean_lock); - -+ mutex_init(&v3d->clk_lock); -+ INIT_DELAYED_WORK(&v3d->clk_down_work, v3d_clock_down_work); -+ - /* Note: We don't allocate address 0. Various bits of HW - * treat 0 as special, such as the occlusion query counters - * where 0 means "disabled". diff --git a/target/linux/brcm2708/patches-4.19/950-0611-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch b/target/linux/brcm2708/patches-4.19/950-0611-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch deleted file mode 100644 index 8313799f53..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0611-HACK-clk-bcm2835-Add-BCM2838_CLOCK_EMMC2-support.patch +++ /dev/null @@ -1,72 +0,0 @@ -From e5cefebc24b7684f4f84a539259612c8f5a4975b Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Thu, 2 May 2019 23:42:29 +0200 -Subject: [PATCH 611/806] HACK: clk-bcm2835: Add BCM2838_CLOCK_EMMC2 support - -The new BCM2838 supports an additional emmc2 clock. So add a new -compatible to register this clock only for BCM2838. - -Signed-off-by: Stefan Wahren ---- - drivers/clk/bcm/clk-bcm2835.c | 20 ++++++++++++++++++-- - include/dt-bindings/clock/bcm2835.h | 2 ++ - 2 files changed, 20 insertions(+), 2 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -124,6 +124,8 @@ - #define CM_AVEODIV 0x1bc - #define CM_EMMCCTL 0x1c0 - #define CM_EMMCDIV 0x1c4 -+#define CM_EMMC2CTL 0x1d0 -+#define CM_EMMC2DIV 0x1d4 - - /* General bits for the CM_*CTL regs */ - # define CM_ENABLE BIT(4) -@@ -2047,6 +2049,15 @@ static const struct bcm2835_clk_desc clk - .frac_bits = 8, - .tcnt_mux = 39), - -+ /* EMMC2 clock (only available for BCM2838) */ -+ [BCM2838_CLOCK_EMMC2] = REGISTER_PER_CLK( -+ .name = "emmc2", -+ .ctl_reg = CM_EMMC2CTL, -+ .div_reg = CM_EMMC2DIV, -+ .int_bits = 4, -+ .frac_bits = 8, -+ .tcnt_mux = 42), -+ - /* General purpose (GPIO) clocks */ - [BCM2835_CLOCK_GP0] = REGISTER_PER_CLK( - .name = "gp0", -@@ -2276,8 +2287,12 @@ static int bcm2835_clk_probe(struct plat - - for (i = 0; i < asize; i++) { - desc = &clk_desc_array[i]; -- if (desc->clk_register && desc->data) -- hws[i] = desc->clk_register(cprman, desc->data); -+ if (desc->clk_register && desc->data) { -+ if ((i != BCM2838_CLOCK_EMMC2) || -+ of_device_is_compatible(fw_node, "brcm,bcm2838-cprman")) { -+ hws[i] = desc->clk_register(cprman, desc->data); -+ } -+ } - } - - ret = bcm2835_mark_sdc_parent_critical(hws[BCM2835_CLOCK_SDRAM]->clk); -@@ -2297,6 +2312,7 @@ static int bcm2835_clk_probe(struct plat - - static const struct of_device_id bcm2835_clk_of_match[] = { - { .compatible = "brcm,bcm2835-cprman", }, -+ { .compatible = "brcm,bcm2838-cprman", }, - {} - }; - MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match); ---- a/include/dt-bindings/clock/bcm2835.h -+++ b/include/dt-bindings/clock/bcm2835.h -@@ -66,3 +66,5 @@ - #define BCM2835_CLOCK_DSI1E 48 - #define BCM2835_CLOCK_DSI0P 49 - #define BCM2835_CLOCK_DSI1P 50 -+ -+#define BCM2838_CLOCK_EMMC2 51 diff --git a/target/linux/brcm2708/patches-4.19/950-0611-arm-dts-Improve-the-bcm27xx-inclusion-hierarchy.patch b/target/linux/brcm2708/patches-4.19/950-0611-arm-dts-Improve-the-bcm27xx-inclusion-hierarchy.patch new file mode 100644 index 0000000000..875d8917c2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0611-arm-dts-Improve-the-bcm27xx-inclusion-hierarchy.patch @@ -0,0 +1,490 @@ +From d27f2b90df0b787859c2f5665feaecbe87e6b1ff Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 4 Jun 2019 16:22:22 +0100 +Subject: [PATCH] arm: dts: Improve the bcm27xx inclusion hierarchy + +1) The top-level .dts files now include parallel chains of bcm27xx.dtsi + and bcm27xx-rpi.dtsi files, with no cross-inclusion between the two + chains. + +2) Move definitions and deletions to the point of maximum commonality + to reduce redundancy. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi-cm.dtsi | 1 + + arch/arm/boot/dts/bcm2708-rpi-zero-w.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi-zero.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi.dtsi | 63 +++++++--------------- + arch/arm/boot/dts/bcm2708.dtsi | 1 - + arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 1 + + arch/arm/boot/dts/bcm2709.dtsi | 1 - + arch/arm/boot/dts/bcm270x.dtsi | 18 +------ + arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 1 + + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 1 + + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 1 + + arch/arm/boot/dts/bcm2710.dtsi | 1 - + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 15 ++++-- + arch/arm/boot/dts/bcm2711-rpi.dtsi | 7 +++ + arch/arm/boot/dts/bcm2711.dtsi | 10 ---- + arch/arm/boot/dts/bcm2835-rpi.dtsi | 16 ++++++ + arch/arm/boot/dts/bcm2838.dtsi | 33 ++++++++---- + arch/arm/boot/dts/bcm283x.dtsi | 2 +- + 20 files changed, 86 insertions(+), 90 deletions(-) + create mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi + +--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" + +--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" + #include "bcm283x-rpi-smsc9512.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" + +--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi +@@ -1,4 +1,5 @@ + #include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" + + &leds { + act_led: act { +--- a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" + + / { +--- a/arch/arm/boot/dts/bcm2708-rpi-zero.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" + + / { +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -1,6 +1,6 @@ +-/* Downstream version of bcm2835-rpi.dtsi */ ++/* Downstream modifications to bcm2835-rpi.dtsi */ + +-#include ++#include "bcm2835-rpi.dtsi" + + / { + memory { +@@ -49,29 +49,10 @@ + reg = <0x7e200000 0x1000>; + }; + +- firmware: firmware { +- compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; +- #address-cells = <0>; +- #size-cells = <0>; +- mboxes = <&mailbox>; +- }; +- +- power: power { +- compatible = "raspberrypi,bcm2835-power"; +- firmware = <&firmware>; +- #power-domain-cells = <1>; +- }; +- + fb: fb { + compatible = "brcm,bcm2708-fb"; + firmware = <&firmware>; +- status = "disabled"; +- }; +- +- vchiq: mailbox@7e00b840 { +- compatible = "brcm,bcm2835-vchiq"; +- reg = <0x7e00b840 0x3c>; +- interrupts = <0 2>; ++ status = "okay"; + }; + + vcsm: vcsm { +@@ -91,10 +72,6 @@ + sound: sound { + status = "disabled"; + }; +- +- txp: txp@7e004000 { +- status = "disabled"; +- }; + }; + + __overrides__ { +@@ -125,11 +102,23 @@ + }; + + &hdmi { +- power-domains = <&power RPI_POWER_DOMAIN_HDMI>; ++ status = "disabled"; + }; + +-&usb { +- power-domains = <&power RPI_POWER_DOMAIN_USB>; ++&txp { ++ status = "disabled"; ++}; ++ ++&i2c0 { ++ status = "disabled"; ++}; ++ ++&i2c1 { ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ status = "disabled"; + }; + + &clocks { +@@ -141,16 +130,8 @@ sdhost_pins: &sdhost_gpio48 { + }; + + &sdhost { +- pinctrl-names = "default"; +- pinctrl-0 = <&sdhost_gpio48>; +- bus-width = <4>; + brcm,overclock-50 = <0>; + brcm,pio-limit = <1>; +- status = "okay"; +-}; +- +-&fb { +- status = "okay"; + }; + + &cpu_thermal { +@@ -160,11 +141,3 @@ sdhost_pins: &sdhost_gpio48 { + &vec { + status = "disabled"; + }; +- +-&csi0 { +- power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; +-}; +- +-&csi1 { +- power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; +-}; +--- a/arch/arm/boot/dts/bcm2708.dtsi ++++ b/arch/arm/boot/dts/bcm2708.dtsi +@@ -1,6 +1,5 @@ + #include "bcm2835.dtsi" + #include "bcm270x.dtsi" +-#include "bcm2708-rpi.dtsi" + + / { + /delete-node/ cpus; +--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2709.dtsi" ++#include "bcm2709-rpi.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" + +--- a/arch/arm/boot/dts/bcm2709.dtsi ++++ b/arch/arm/boot/dts/bcm2709.dtsi +@@ -1,6 +1,5 @@ + #include "bcm2836.dtsi" + #include "bcm270x.dtsi" +-#include "bcm2709-rpi.dtsi" + + / { + soc { +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -68,7 +68,7 @@ + + /delete-node/ sdhci@7e300000; + +- mmc: mmc@7e300000 { ++ sdhci: mmc: mmc@7e300000 { + compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; + reg = <0x7e300000 0x100>; + interrupts = <2 30>; +@@ -152,22 +152,6 @@ + }; + }; + +- vdd_5v0_reg: fixedregulator_5v0 { +- compatible = "regulator-fixed"; +- regulator-name = "5v0"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- regulator-always-on; +- }; +- +- vdd_3v3_reg: fixedregulator_3v3 { +- compatible = "regulator-fixed"; +- regulator-name = "3v3"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- regulator-always-on; +- }; +- + __overrides__ { + cam0-pwdn-ctrl; + cam0-pwdn; +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" + #include "bcm283x-rpi-lan7515.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" + +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" + #include "bcm283x-rpi-smsc9514.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" + +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" + #include "bcm283x-rpi-csi0-2lane.dtsi" + #include "bcm283x-rpi-csi1-4lane.dtsi" + +--- a/arch/arm/boot/dts/bcm2710.dtsi ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -1,6 +1,5 @@ + #include "bcm2837.dtsi" + #include "bcm270x.dtsi" +-#include "bcm2709-rpi.dtsi" + + / { + compatible = "brcm,bcm2837", "brcm,bcm2836"; +--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -1,13 +1,12 @@ + /dts-v1/; + + #include "bcm2711.dtsi" ++#include "bcm2711-rpi.dtsi" + #include "bcm283x-rpi-csi1-2lane.dtsi" + + / { +- compatible = "raspberrypi,4-model-b", "brcm,bcm2838", "brcm,bcm2837"; ++ compatible = "raspberrypi,4-model-b", "brcm,bcm2838"; + model = "Raspberry Pi 4 Model B"; +- #address-cells = <2>; +- #size-cells = <1>; + + memory { + device_type = "memory"; +@@ -48,10 +47,18 @@ + }; + + &firmware { +- expgpio: expgpio { ++ expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; ++ gpio-line-names = "BT_ON", ++ "WL_ON", ++ "PWR_LED_OFF", ++ "GLOBAL_RESET", ++ "VDD_SD_IO_SEL", ++ "CAM_GPIO", ++ "", ++ ""; + status = "okay"; + }; + }; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi +@@ -0,0 +1,7 @@ ++#include "bcm2708-rpi.dtsi" ++#include "bcm2838-rpi.dtsi" ++ ++&v3d { ++ /* Undo the overwriting by bcm270x.dtsi */ ++ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; ++}; +--- a/arch/arm/boot/dts/bcm2711.dtsi ++++ b/arch/arm/boot/dts/bcm2711.dtsi +@@ -1,10 +1,8 @@ + #include "bcm2838.dtsi" + #include "bcm270x.dtsi" +-#include "bcm2708-rpi.dtsi" + + / { + soc { +- /delete-node/ mailbox@7e00b840; + /delete-node/ v3d@7ec00000; + }; + +@@ -17,14 +15,6 @@ + status = "disabled"; + }; + +-&dma { +- brcm,dma-channel-mask = <0x7ef5>; +-}; +- +-&txp { +- interrupts = ; +-}; +- + &firmwarekms { + interrupts = ; + }; +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -36,6 +36,22 @@ + interrupts = <0 2>; + }; + }; ++ ++ vdd_3v3_reg: fixedregulator_3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vdd_5v0_reg: fixedregulator_5v0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "5v0"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; + }; + + &gpio { +--- a/arch/arm/boot/dts/bcm2838.dtsi ++++ b/arch/arm/boot/dts/bcm2838.dtsi +@@ -5,7 +5,10 @@ + #include + + / { +- compatible = "brcm,bcm2838", "brcm,bcm2837"; ++ compatible = "brcm,bcm2838"; ++ ++ #address-cells = <2>; ++ #size-cells = <1>; + + interrupt-parent = <&gicv2>; + +@@ -16,8 +19,8 @@ + /* Emulate a contiguous 30-bit address range for DMA */ + dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; + +- /delete-node/ mailbox@7e00b840; + /delete-node/ interrupt-controller@7e00f300; ++ /delete-node/ v3d@7ec00000; + + local_intc: local_intc@40000000 { + compatible = "brcm,bcm2836-l1-intc"; +@@ -191,6 +194,16 @@ + interrupts = ; + }; + ++ pwm1: pwm@7e20c800 { ++ compatible = "brcm,bcm2835-pwm"; ++ reg = <0x7e20c800 0x28>; ++ clocks = <&clocks BCM2835_CLOCK_PWM>; ++ assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; ++ assigned-clock-rates = <10000000>; ++ #pwm-cells = <2>; ++ status = "disabled"; ++ }; ++ + emmc2: emmc2@7e340000 { + compatible = "brcm,bcm2711-emmc2"; + status = "okay"; +@@ -385,7 +398,7 @@ + "dma13", + "dma14"; + #dma-cells = <1>; +- brcm,dma-channel-mask = <0x7000>; ++ brcm,dma-channel-mask = <0x7800>; + }; + /* DMA4 - 40 bit DMA engines */ + +@@ -396,12 +409,6 @@ + interrupts = ; + }; + +- vchiq: mailbox@7e00b840 { +- compatible = "brcm,bcm2838-vchiq"; +- reg = <0 0x7e00b840 0x3c>; +- interrupts = ; +- }; +- + hevc-decoder@7eb00000 { + compatible = "raspberrypi,argon-hevc-decoder"; + reg = <0x0 0x7eb00000 0x10000>; +@@ -450,6 +457,8 @@ + }; + + &gpio { ++ compatible = "brcm,bcm2838-gpio", "brcm,bcm2835-gpio"; ++ + gpclk0_gpio49: gpclk0_gpio49 { + brcm,pins = <49>; + brcm,function = ; +@@ -729,5 +738,9 @@ + "dma8", + "dma9", + "dma10"; +- brcm,dma-channel-mask = <0x01f5>; ++ brcm,dma-channel-mask = <0x07f5>; ++}; ++ ++&txp { ++ interrupts = ; + }; +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -55,7 +55,7 @@ + #address-cells = <1>; + #size-cells = <1>; + +- txp@7e004000 { ++ txp: txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; diff --git a/target/linux/brcm2708/patches-4.19/950-0612-arm-dts-First-draft-of-upstream-Pi4-DTS.patch b/target/linux/brcm2708/patches-4.19/950-0612-arm-dts-First-draft-of-upstream-Pi4-DTS.patch new file mode 100644 index 0000000000..0fa4cf338d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0612-arm-dts-First-draft-of-upstream-Pi4-DTS.patch @@ -0,0 +1,176 @@ +From 5216bb8a1257a8216362affe4757a96a36b60b32 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 11 Jun 2019 18:08:05 +0100 +Subject: [PATCH] arm: dts: First draft of upstream Pi4 DTS + +I've attempted to follow the upstream conventions in the DT commits, +but this is just presented here initially as a talking point. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm2838-rpi-4-b.dts | 118 ++++++++++++++++++++++++++ + arch/arm/boot/dts/bcm2838-rpi.dtsi | 25 ++++++ + 3 files changed, 144 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm2838-rpi-4-b.dts + create mode 100644 arch/arm/boot/dts/bcm2838-rpi.dtsi + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -94,6 +94,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2836-rpi-2-b.dtb \ + bcm2837-rpi-3-b.dtb \ + bcm2837-rpi-3-b-plus.dtb \ ++ bcm2838-rpi-4-b.dtb \ + bcm2835-rpi-zero.dtb \ + bcm2835-rpi-zero-w.dtb + dtb-$(CONFIG_ARCH_BCM_5301X) += \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2838-rpi-4-b.dts +@@ -0,0 +1,118 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/dts-v1/; ++#include "bcm2838.dtsi" ++#include "bcm2835-rpi.dtsi" ++#include "bcm2838-rpi.dtsi" ++ ++/ { ++ compatible = "raspberrypi,4-model-b", "brcm,bcm2838"; ++ model = "Raspberry Pi 4 Model B"; ++ ++ chosen { ++ /* 8250 auxiliary UART instead of pl011 */ ++ stdout-path = "serial1:115200n8"; ++ }; ++ ++ memory { ++ reg = <0 0 0x40000000>; ++ }; ++ ++ leds { ++ act { ++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ pwr { ++ label = "PWR"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ wifi_pwrseq: wifi-pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; ++ }; ++ ++ sd_io_1v8_reg: sd_io_1v8_reg { ++ status = "okay"; ++ compatible = "regulator-gpio"; ++ vin-supply = <&vdd_5v0_reg>; ++ regulator-name = "vdd-sd-io"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-settling-time-us = <5000>; ++ ++ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; ++ states = <1800000 0x1 ++ 3300000 0x0>; ++ }; ++}; ++ ++&firmware { ++ expgpio: gpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-line-names = "BT_ON", ++ "WL_ON", ++ "PWR_LED_OFF", ++ "GLOBAL_RESET", ++ "VDD_SD_IO_SEL", ++ "CAM_GPIO", ++ "", ++ ""; ++ status = "okay"; ++ }; ++}; ++ ++&pwm1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; ++ status = "okay"; ++}; ++ ++/* SDHCI is used to control the SDIO for wireless */ ++&sdhci { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_gpio34>; ++ status = "okay"; ++ bus-width = <4>; ++ non-removable; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ }; ++}; ++ ++/* EMMC2 is used to drive the SD card */ ++&emmc2 { ++ status = "okay"; ++ broken-cd; ++ vqmmc-supply = <&sd_io_1v8_reg>; ++}; ++ ++/* uart0 communicates with the BT module */ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; ++ status = "okay"; ++ ++ bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <2000000>; ++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; ++ }; ++}; ++ ++/* uart1 is mapped to the pin header */ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_gpio14>; ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2838-rpi.dtsi +@@ -0,0 +1,25 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++/ { ++ soc { ++ /delete-node/ mailbox@7e00b840; ++ }; ++}; ++ ++&scb { ++ vchiq: mailbox@7e00b840 { ++ compatible = "brcm,bcm2838-vchiq"; ++ reg = <0 0x7e00b840 0x3c>; ++ interrupts = ; ++ }; ++}; ++ ++&dma { ++ /* The VPU firmware uses DMA channel 11 for VCHIQ */ ++ brcm,dma-channel-mask = <0x1f5>; ++}; ++ ++&dma40 { ++ /* The VPU firmware DMA channel 11 for VCHIQ */ ++ brcm,dma-channel-mask = <0x7000>; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0612-drm-vc4-firmware-kms-Remove-incorrect-overscan-suppo.patch b/target/linux/brcm2708/patches-4.19/950-0612-drm-vc4-firmware-kms-Remove-incorrect-overscan-suppo.patch deleted file mode 100644 index 9119ce1ef3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0612-drm-vc4-firmware-kms-Remove-incorrect-overscan-suppo.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 3cd15f787b391db5224a27715fe9dc6fc8559bee Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 3 May 2019 13:58:03 +0100 -Subject: [PATCH 612/806] drm: vc4-firmware-kms: Remove incorrect overscan - support. - -The overscan support was required for the old mailbox API -in order to match up the cursor and frame buffer planes. -With the newer API directly talking to dispmanx there is no -difference, therefore FKMS does not need to make any -adjustments. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 --------------- - 1 file changed, 15 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -232,7 +232,6 @@ struct vc4_crtc { - void __iomem *regs; - - struct drm_pending_vblank_event *event; -- u32 overscan[4]; - bool vblank_enabled; - u32 display_number; - u32 display_type; -@@ -468,11 +467,6 @@ static void vc4_plane_atomic_update(stru - break; - } - -- if (vc4_crtc) { -- mb->plane.dst_x += vc4_crtc->overscan[0]; -- mb->plane.dst_y += vc4_crtc->overscan[1]; -- } -- - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane update %dx%d@%d +dst(%d,%d, %d,%d) +src(%d,%d, %d,%d) 0x%08x/%08x/%08x/%d, alpha %u zpos %u\n", - plane->base.id, plane->name, - mb->plane.width, -@@ -1228,15 +1222,6 @@ static int vc4_fkms_create_screen(struct - goto err_destroy_encoder; - } - -- ret = rpi_firmware_property(vc4->firmware, -- RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN, -- &vc4_crtc->overscan, -- sizeof(vc4_crtc->overscan)); -- if (ret) { -- DRM_ERROR("Failed to get overscan state: 0x%08x\n", vc4_crtc->overscan[0]); -- memset(&vc4_crtc->overscan, 0, sizeof(vc4_crtc->overscan)); -- } -- - *ret_crtc = vc4_crtc; - - return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0613-drm-vc4-Log-flags-in-fkms-mode-set.patch b/target/linux/brcm2708/patches-4.19/950-0613-drm-vc4-Log-flags-in-fkms-mode-set.patch deleted file mode 100644 index ae6f69267f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0613-drm-vc4-Log-flags-in-fkms-mode-set.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 07288c2bd9733dc9317c5f9b02980a59a05ce3af Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 7 May 2019 12:13:34 +0100 -Subject: [PATCH 613/806] drm: vc4: Log flags in fkms mode set - -The flags contain info such as limited/full range RGB, aspect -ratio, and a fwe other useful things. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -685,12 +685,13 @@ static void vc4_crtc_mode_set_nofb(struc - return; - } - -- DRM_DEBUG_KMS("Setting mode for display num %u mode name %s, clk %d, h(disp %d, start %d, end %d, total %d, skew %d) v(disp %d, start %d, end %d, total %d, scan %d), vrefresh %d, par %u\n", -+ DRM_DEBUG_KMS("Setting mode for display num %u mode name %s, clk %d, h(disp %d, start %d, end %d, total %d, skew %d) v(disp %d, start %d, end %d, total %d, scan %d), vrefresh %d, par %u, flags 0x%04x\n", - vc4_crtc->display_number, mode->name, mode->clock, - mode->hdisplay, mode->hsync_start, mode->hsync_end, - mode->htotal, mode->hskew, mode->vdisplay, - mode->vsync_start, mode->vsync_end, mode->vtotal, -- mode->vscan, mode->vrefresh, mode->picture_aspect_ratio); -+ mode->vscan, mode->vrefresh, mode->picture_aspect_ratio, -+ mode->flags); - mb.timings.display = vc4_crtc->display_number; - - mb.timings.video_id_code = frame.avi.video_code; diff --git a/target/linux/brcm2708/patches-4.19/950-0613-overlays-Fix-compatible-string-for-ds1307-RTC.patch b/target/linux/brcm2708/patches-4.19/950-0613-overlays-Fix-compatible-string-for-ds1307-RTC.patch new file mode 100644 index 0000000000..220cd5e092 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0613-overlays-Fix-compatible-string-for-ds1307-RTC.patch @@ -0,0 +1,28 @@ +From 4a5715f95d8865c817c9a747f28f38b234f5df42 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 17 Jun 2019 14:36:12 +0100 +Subject: [PATCH] overlays: Fix compatible string for ds1307 RTC + +Kernels since 4.19 have required the correct manufacture name in the +compatible string for I2C devices, and unfortunately the one for the +Dallas/Maxim DS1307 should have been "dallas,ds1307" and not +"maxim,ds1307". + +See: https://github.com/raspberrypi/linux/issues/3013 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +@@ -30,7 +30,7 @@ + status = "okay"; + + ds1307: ds1307@68 { +- compatible = "maxim,ds1307"; ++ compatible = "dallas,ds1307"; + reg = <0x68>; + status = "okay"; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0614-drm-vc4-firmware-kms-Fix-DSI-display-support.patch b/target/linux/brcm2708/patches-4.19/950-0614-drm-vc4-firmware-kms-Fix-DSI-display-support.patch deleted file mode 100644 index 9ed0c6f48c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0614-drm-vc4-firmware-kms-Fix-DSI-display-support.patch +++ /dev/null @@ -1,25 +0,0 @@ -From d66b1d056d07b27803ba0756ecdb0d4419bcaaa2 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 16 May 2019 17:49:42 +0100 -Subject: [PATCH 614/806] drm: vc4-firmware-kms: Fix DSI display support - -The mode was incorrectly listed as interlaced, which was then -rejected. -Correct this and FKMS works with the DSI display. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -1003,7 +1003,7 @@ static const struct drm_display_mode lcd - 25979400 / 1000, - 800, 800 + 1, 800 + 1 + 2, 800 + 1 + 2 + 46, 0, - 480, 480 + 7, 480 + 7 + 2, 480 + 7 + 2 + 21, 0, -- DRM_MODE_FLAG_INTERLACE) -+ 0) - }; - - static int vc4_fkms_lcd_connector_get_modes(struct drm_connector *connector) diff --git a/target/linux/brcm2708/patches-4.19/950-0614-overlays-Fix-further-maxim-ds1307-references.patch b/target/linux/brcm2708/patches-4.19/950-0614-overlays-Fix-further-maxim-ds1307-references.patch new file mode 100644 index 0000000000..30dcaf4000 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0614-overlays-Fix-further-maxim-ds1307-references.patch @@ -0,0 +1,47 @@ +From ff25f8c70fd995e4f76a3c1245556cc0ec3db19d Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 18 Jun 2019 11:16:13 +0100 +Subject: [PATCH] overlays: Fix further maxim,ds1307 references + +See: https://github.com/raspberrypi/linux/issues/3013 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/balena-fin-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/tinylcd35-overlay.dts | 2 +- + 3 files changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts ++++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts +@@ -84,7 +84,7 @@ + + // rtc clock + ds1307: ds1307@68 { +- compatible = "maxim,ds1307"; ++ compatible = "dallas,ds1307"; + reg = <0x68>; + status = "okay"; + }; +--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts +@@ -46,7 +46,7 @@ + status = "okay"; + + ds1307: ds1307@68 { +- compatible = "maxim,ds1307"; ++ compatible = "dallas,ds1307"; + reg = <0x68>; + status = "okay"; + }; +--- a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts ++++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts +@@ -155,7 +155,7 @@ + status = "okay"; + + ds1307: ds1307@68 { +- compatible = "maxim,ds1307"; ++ compatible = "dallas,ds1307"; + reg = <0x68>; + status = "okay"; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0615-drm-vc4-Probe-DPI-DSI-timings-from-the-firmware.patch b/target/linux/brcm2708/patches-4.19/950-0615-drm-vc4-Probe-DPI-DSI-timings-from-the-firmware.patch deleted file mode 100644 index 0440bd7fc3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0615-drm-vc4-Probe-DPI-DSI-timings-from-the-firmware.patch +++ /dev/null @@ -1,120 +0,0 @@ -From b4ffa49d762a4af832d0d8660caf59722c0ff75a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 21 May 2019 11:50:00 +0100 -Subject: [PATCH 615/806] drm: vc4: Probe DPI/DSI timings from the firmware - -For DPI and DSI displays query the firmware as to the configuration -and add it as the only mode for DRM. - -In theory we can add plumbing for setting the DPI/DSI mode from -KMS, but this is not being added at present as the support frameworks -aren't present in the firmware. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 60 ++++++++++++++++++---- - include/soc/bcm2835/raspberrypi-firmware.h | 1 + - 2 files changed, 51 insertions(+), 10 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -280,7 +280,7 @@ static u32 vc4_get_display_type(u32 disp - /* The firmware display (DispmanX) IDs map to specific types in - * a fixed manner. - */ -- DRM_MODE_ENCODER_DSI, /* MAIN_LCD */ -+ DRM_MODE_ENCODER_DSI, /* MAIN_LCD - DSI or DPI */ - DRM_MODE_ENCODER_DSI, /* AUX_LCD */ - DRM_MODE_ENCODER_TMDS, /* HDMI0 */ - DRM_MODE_ENCODER_TVDAC, /* VEC */ -@@ -362,7 +362,6 @@ static void vc4_plane_atomic_update(stru - vc4_get_vc_image_fmt(drm_fmt->format); - struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); - struct mailbox_set_plane *mb = &vc4_plane->mb; -- struct vc4_crtc *vc4_crtc = to_vc4_crtc(state->crtc); - int num_planes = fb->format->num_planes; - struct drm_display_mode *mode = &state->crtc->mode; - unsigned int rotation = SUPPORTED_ROTATIONS; -@@ -997,7 +996,9 @@ static int vc4_fkms_connector_get_modes( - return ret; - } - --/* FIXME: Read LCD mode from the firmware. This is the DSI panel resolution. */ -+/* This is the DSI panel resolution. Use this as a default should the firmware -+ * not respond to our request for the timings. -+ */ - static const struct drm_display_mode lcd_mode = { - DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, - 25979400 / 1000, -@@ -1008,15 +1009,54 @@ static const struct drm_display_mode lcd - - static int vc4_fkms_lcd_connector_get_modes(struct drm_connector *connector) - { -- //struct vc4_fkms_connector *fkms_connector = -- // to_vc4_fkms_connector(connector); -- //struct drm_encoder *encoder = fkms_connector->encoder; -- //struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); -+ struct vc4_fkms_connector *fkms_connector = -+ to_vc4_fkms_connector(connector); -+ struct vc4_dev *vc4 = fkms_connector->vc4_dev; - struct drm_display_mode *mode; -- //int ret = 0; -+ struct mailbox_set_mode mb = { -+ .tag1 = { RPI_FIRMWARE_GET_DISPLAY_TIMING, -+ sizeof(struct set_timings), 0}, -+ .timings = { .display = fkms_connector->display_number }, -+ }; -+ struct drm_display_mode fw_mode; -+ int ret = 0; -+ -+ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); -+ if (!ret) { -+ /* Equivalent to DRM_MODE macro. */ -+ memset(&fw_mode, 0, sizeof(fw_mode)); -+ strncpy(fw_mode.name, "LCD_MODE", sizeof(fw_mode.name)); -+ fw_mode.status = 0; -+ fw_mode.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; -+ fw_mode.clock = mb.timings.clock; -+ fw_mode.hdisplay = mb.timings.hdisplay; -+ fw_mode.hsync_start = mb.timings.hsync_start; -+ fw_mode.hsync_end = mb.timings.hsync_end; -+ fw_mode.htotal = mb.timings.htotal; -+ fw_mode.hskew = 0; -+ fw_mode.vdisplay = mb.timings.vdisplay; -+ fw_mode.vsync_start = mb.timings.vsync_start; -+ fw_mode.vsync_end = mb.timings.vsync_end; -+ fw_mode.vtotal = mb.timings.vtotal; -+ fw_mode.vscan = mb.timings.vscan; -+ if (mb.timings.flags & TIMINGS_FLAGS_H_SYNC_POS) -+ fw_mode.flags |= DRM_MODE_FLAG_PHSYNC; -+ else -+ fw_mode.flags |= DRM_MODE_FLAG_NHSYNC; -+ if (mb.timings.flags & TIMINGS_FLAGS_V_SYNC_POS) -+ fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; -+ else -+ fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; -+ -+ fw_mode.base.type = DRM_MODE_OBJECT_MODE; -+ -+ mode = drm_mode_duplicate(connector->dev, -+ &fw_mode); -+ } else { -+ mode = drm_mode_duplicate(connector->dev, -+ &lcd_mode); -+ } - -- mode = drm_mode_duplicate(connector->dev, -- &lcd_mode); - if (!mode) { - DRM_ERROR("Failed to create a new display mode\n"); - return -ENOMEM; ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -151,6 +151,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, - - RPI_FIRMWARE_SET_PLANE = 0x00048015, -+ RPI_FIRMWARE_GET_DISPLAY_TIMING = 0x00040017, - RPI_FIRMWARE_SET_TIMING = 0x00048017, - - RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, diff --git a/target/linux/brcm2708/patches-4.19/950-0615-overlays-Cosmetic-change-to-upstream-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0615-overlays-Cosmetic-change-to-upstream-overlay.patch new file mode 100644 index 0000000000..51db874675 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0615-overlays-Cosmetic-change-to-upstream-overlay.patch @@ -0,0 +1,25 @@ +From ce7469a397da34a19112b8d14eb283e02088755b Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 18 Jun 2019 11:19:59 +0100 +Subject: [PATCH] overlays: Cosmetic change to upstream overlay + +The dwc2 overlay no longer uses the dwc2_usb label, and the latest +ovmerge (which generates the upstream overlay) removes unused labels. +Update the checked-in version to match. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/upstream-overlay.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/upstream-overlay.dts ++++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts +@@ -113,7 +113,7 @@ + target = <&usb>; + #address-cells = <1>; + #size-cells = <1>; +- dwc2_usb: __overlay__ { ++ __overlay__ { + compatible = "brcm,bcm2835-usb"; + dr_mode = "otg"; + g-np-tx-fifo-size = <32>; diff --git a/target/linux/brcm2708/patches-4.19/950-0616-drm-vc4-handle-the-case-where-there-are-no-available.patch b/target/linux/brcm2708/patches-4.19/950-0616-drm-vc4-handle-the-case-where-there-are-no-available.patch deleted file mode 100644 index 4de134efb0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0616-drm-vc4-handle-the-case-where-there-are-no-available.patch +++ /dev/null @@ -1,67 +0,0 @@ -From dd99aa50a3ea7f7fe1ddfd59b1a2e969c744b8a0 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Tue, 28 May 2019 13:56:06 +0100 -Subject: [PATCH 616/806] drm: vc4: handle the case where there are no - available displays - -It's reasonable for the firmware to return zero as the number of -attached displays. Handle this case as otherwise drm thinks that -the DSI panel is attached, which is nonsense. - -Signed-off-by: Jonathan Bell ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 32 +++++++++++++++----------- - 1 file changed, 18 insertions(+), 14 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -1309,13 +1309,13 @@ static int vc4_fkms_bind(struct device * - RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS, - &num_displays, sizeof(u32)); - -- /* If we fail to get the number of displays, or it returns 0, then -+ /* If we fail to get the number of displays, then - * assume old firmware that doesn't have the mailbox call, so just - * set one display - */ -- if (ret || num_displays == 0) { -+ if (ret) { - num_displays = 1; -- DRM_WARN("Unable to determine number of displays's. Assuming 1\n"); -+ DRM_WARN("Unable to determine number of displays - assuming 1\n"); - ret = 0; - } - -@@ -1344,17 +1344,21 @@ static int vc4_fkms_bind(struct device * - display_num); - } - -- /* Map the SMI interrupt reg */ -- crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0); -- if (IS_ERR(crtc_list[0]->regs)) -- DRM_ERROR("Oh dear, failed to map registers\n"); -- -- writel(0, crtc_list[0]->regs + SMICS); -- ret = devm_request_irq(dev, platform_get_irq(pdev, 0), -- vc4_crtc_irq_handler, 0, "vc4 firmware kms", -- crtc_list); -- if (ret) -- DRM_ERROR("Oh dear, failed to register IRQ\n"); -+ if (num_displays > 0) { -+ /* Map the SMI interrupt reg */ -+ crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0); -+ if (IS_ERR(crtc_list[0]->regs)) -+ DRM_ERROR("Oh dear, failed to map registers\n"); -+ -+ writel(0, crtc_list[0]->regs + SMICS); -+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), -+ vc4_crtc_irq_handler, 0, -+ "vc4 firmware kms", crtc_list); -+ if (ret) -+ DRM_ERROR("Oh dear, failed to register IRQ\n"); -+ } else { -+ DRM_WARN("No displays found. Consider forcing hotplug if HDMI is attached\n"); -+ } - - platform_set_drvdata(pdev, crtc_list); - diff --git a/target/linux/brcm2708/patches-4.19/950-0616-w1-ds2805-rename-w1_family-struct-fixing-c-p-typo.patch b/target/linux/brcm2708/patches-4.19/950-0616-w1-ds2805-rename-w1_family-struct-fixing-c-p-typo.patch new file mode 100644 index 0000000000..2f33f638c2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0616-w1-ds2805-rename-w1_family-struct-fixing-c-p-typo.patch @@ -0,0 +1,44 @@ +From 4f1fd30b76c1bec76069483b88747783a0654f38 Mon Sep 17 00:00:00 2001 +From: Mariusz Bialonczyk +Date: Sat, 25 May 2019 10:45:38 +0200 +Subject: [PATCH] w1: ds2805: rename w1_family struct, fixing c-p typo + +commit 0e3743d870711ae4daf1e7170c8d9381564e244d upstream. + +The ds2805 has a structure named: w1_family_2d, which surely +comes from a w1_ds2431 module. This commit fixes this name to +prevent confusion and mark a correct family name. + +Signed-off-by: Mariusz Bialonczyk +Signed-off-by: Greg Kroah-Hartman +--- + drivers/w1/slaves/w1_ds2805.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/w1/slaves/w1_ds2805.c ++++ b/drivers/w1/slaves/w1_ds2805.c +@@ -288,7 +288,7 @@ static struct w1_family_ops w1_f0d_fops + .remove_slave = w1_f0d_remove_slave, + }; + +-static struct w1_family w1_family_2d = { ++static struct w1_family w1_family_0d = { + .fid = W1_EEPROM_DS2805, + .fops = &w1_f0d_fops, + }; +@@ -296,13 +296,13 @@ static struct w1_family w1_family_2d = { + static int __init w1_f0d_init(void) + { + pr_info("%s()\n", __func__); +- return w1_register_family(&w1_family_2d); ++ return w1_register_family(&w1_family_0d); + } + + static void __exit w1_f0d_fini(void) + { + pr_info("%s()\n", __func__); +- w1_unregister_family(&w1_family_2d); ++ w1_unregister_family(&w1_family_0d); + } + + module_init(w1_f0d_init); diff --git a/target/linux/brcm2708/patches-4.19/950-0617-drm-vc4-Support-the-VEC-in-FKMS.patch b/target/linux/brcm2708/patches-4.19/950-0617-drm-vc4-Support-the-VEC-in-FKMS.patch deleted file mode 100644 index 80f9c81d48..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0617-drm-vc4-Support-the-VEC-in-FKMS.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 82ef7a95f5ae86df811253d58d93ca4fb2cbd45a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 24 May 2019 17:59:01 +0100 -Subject: [PATCH 617/806] drm/vc4: Support the VEC in FKMS - -Extends the DPI/DSI support to also report the VEC output -which supports interlacing too. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 16 +++++++++++++++- - 1 file changed, 15 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -125,6 +125,7 @@ struct set_timings { - #define TIMINGS_FLAGS_H_SYNC_NEG 0 - #define TIMINGS_FLAGS_V_SYNC_POS BIT(1) - #define TIMINGS_FLAGS_V_SYNC_NEG 0 -+#define TIMINGS_FLAGS_INTERLACE BIT(2) - - #define TIMINGS_FLAGS_ASPECT_MASK GENMASK(7, 4) - #define TIMINGS_FLAGS_ASPECT_NONE (0 << 4) -@@ -1047,6 +1048,12 @@ static int vc4_fkms_lcd_connector_get_mo - fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; - else - fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; -+ if (mb.timings.flags & TIMINGS_FLAGS_V_SYNC_POS) -+ fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; -+ else -+ fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; -+ if (mb.timings.flags & TIMINGS_FLAGS_INTERLACE) -+ fw_mode.flags |= DRM_MODE_FLAG_INTERLACE; - - fw_mode.base.type = DRM_MODE_OBJECT_MODE; - -@@ -1133,17 +1140,24 @@ vc4_fkms_connector_init(struct drm_devic - DRM_MODE_CONNECTOR_DSI); - drm_connector_helper_add(connector, - &vc4_fkms_lcd_conn_helper_funcs); -+ connector->interlace_allowed = 0; -+ } else if (fkms_connector->display_type == DRM_MODE_ENCODER_TVDAC) { -+ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, -+ DRM_MODE_CONNECTOR_Composite); -+ drm_connector_helper_add(connector, -+ &vc4_fkms_lcd_conn_helper_funcs); -+ connector->interlace_allowed = 1; - } else { - drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, - DRM_MODE_CONNECTOR_HDMIA); - drm_connector_helper_add(connector, - &vc4_fkms_connector_helper_funcs); -+ connector->interlace_allowed = 0; - } - - connector->polled = (DRM_CONNECTOR_POLL_CONNECT | - DRM_CONNECTOR_POLL_DISCONNECT); - -- connector->interlace_allowed = 0; - connector->doublescan_allowed = 0; - - drm_connector_attach_encoder(connector, encoder); diff --git a/target/linux/brcm2708/patches-4.19/950-0617-w1-ds2413-output_write-cosmetic-fixes-simplify.patch b/target/linux/brcm2708/patches-4.19/950-0617-w1-ds2413-output_write-cosmetic-fixes-simplify.patch new file mode 100644 index 0000000000..6c0a304f1c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0617-w1-ds2413-output_write-cosmetic-fixes-simplify.patch @@ -0,0 +1,64 @@ +From 3280ce5f5483a351f49e84b48ad98df87989346a Mon Sep 17 00:00:00 2001 +From: Mariusz Bialonczyk +Date: Mon, 20 May 2019 09:05:55 +0200 +Subject: [PATCH] w1: ds2413: output_write() cosmetic fixes / simplify + +commit ae2ee27aa985232f66421d7cd1c7f4b87c7dba7d upstream. + +Make the output_write simpler. +Based on Jean-Francois Dagenais code from: +49695ac46861 ("w1: ds2408: reset on output_write retry with readback") + +Signed-off-by: Mariusz Bialonczyk +Signed-off-by: Greg Kroah-Hartman +--- + drivers/w1/slaves/w1_ds2413.c | 19 +++++++++++-------- + 1 file changed, 11 insertions(+), 8 deletions(-) + +--- a/drivers/w1/slaves/w1_ds2413.c ++++ b/drivers/w1/slaves/w1_ds2413.c +@@ -69,6 +69,7 @@ static ssize_t output_write(struct file + struct w1_slave *sl = kobj_to_w1_slave(kobj); + u8 w1_buf[3]; + unsigned int retries = W1_F3A_RETRIES; ++ ssize_t bytes_written = -EIO; + + if (count != 1 || off != 0) + return -EFAULT; +@@ -78,7 +79,7 @@ static ssize_t output_write(struct file + dev_dbg(&sl->dev, "mutex locked"); + + if (w1_reset_select_slave(sl)) +- goto error; ++ goto out; + + /* according to the DS2413 datasheet the most significant 6 bits + should be set to "1"s, so do it now */ +@@ -91,18 +92,20 @@ static ssize_t output_write(struct file + w1_write_block(sl->master, w1_buf, 3); + + if (w1_read_8(sl->master) == W1_F3A_SUCCESS_CONFIRM_BYTE) { +- mutex_unlock(&sl->master->bus_mutex); +- dev_dbg(&sl->dev, "mutex unlocked, retries:%d", retries); +- return 1; ++ bytes_written = 1; ++ goto out; + } + if (w1_reset_resume_command(sl->master)) +- goto error; ++ goto out; /* unrecoverable error */ ++ ++ dev_warn(&sl->dev, "PIO_ACCESS_WRITE error, retries left: %d\n", retries); + } + +-error: ++out: + mutex_unlock(&sl->master->bus_mutex); +- dev_dbg(&sl->dev, "mutex unlocked in error, retries:%d", retries); +- return -EIO; ++ dev_dbg(&sl->dev, "%s, mutex unlocked, retries: %d\n", ++ (bytes_written > 0) ? "succeeded" : "error", retries); ++ return bytes_written; + } + + static BIN_ATTR(output, S_IRUGO | S_IWUSR | S_IWGRP, NULL, output_write, 1); diff --git a/target/linux/brcm2708/patches-4.19/950-0618-drm-vc4-Fixup-typo-when-setting-HDMI-aspect-ratio.patch b/target/linux/brcm2708/patches-4.19/950-0618-drm-vc4-Fixup-typo-when-setting-HDMI-aspect-ratio.patch deleted file mode 100644 index 19ac6cb4e0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0618-drm-vc4-Fixup-typo-when-setting-HDMI-aspect-ratio.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 2d35ddcd988499ac7bfd08997086cecfc6b5acb3 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 7 May 2019 15:00:02 +0100 -Subject: [PATCH 618/806] drm: vc4: Fixup typo when setting HDMI aspect ratio - -Assignment was to the wrong structure. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -717,19 +717,19 @@ static void vc4_crtc_mode_set_nofb(struc - switch (frame.avi.picture_aspect) { - default: - case HDMI_PICTURE_ASPECT_NONE: -- mode->flags |= TIMINGS_FLAGS_ASPECT_NONE; -+ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_NONE; - break; - case HDMI_PICTURE_ASPECT_4_3: -- mode->flags |= TIMINGS_FLAGS_ASPECT_4_3; -+ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_4_3; - break; - case HDMI_PICTURE_ASPECT_16_9: -- mode->flags |= TIMINGS_FLAGS_ASPECT_16_9; -+ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_16_9; - break; - case HDMI_PICTURE_ASPECT_64_27: -- mode->flags |= TIMINGS_FLAGS_ASPECT_64_27; -+ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_64_27; - break; - case HDMI_PICTURE_ASPECT_256_135: -- mode->flags |= TIMINGS_FLAGS_ASPECT_256_135; -+ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_256_135; - break; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0618-w1-ds2413-add-retry-support-to-state_read.patch b/target/linux/brcm2708/patches-4.19/950-0618-w1-ds2413-add-retry-support-to-state_read.patch new file mode 100644 index 0000000000..07c6157ca5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0618-w1-ds2413-add-retry-support-to-state_read.patch @@ -0,0 +1,74 @@ +From 91e443597cdd8f89d2b68ea5bf0f0823d1853ab7 Mon Sep 17 00:00:00 2001 +From: Mariusz Bialonczyk +Date: Mon, 20 May 2019 09:05:56 +0200 +Subject: [PATCH] w1: ds2413: add retry support to state_read() + +commit c50d09a86172073f55ebac0b92ad5a75907d64e7 upstream. + +The state_read() was calling PIO_ACCESS_READ once and bail out if it +failed for this first time. +This commit is improving this to trying more times before it give up, +similarly as the write call is currently doing. + +Signed-off-by: Mariusz Bialonczyk +Signed-off-by: Greg Kroah-Hartman +--- + drivers/w1/slaves/w1_ds2413.c | 37 +++++++++++++++++++++++------------ + 1 file changed, 24 insertions(+), 13 deletions(-) + +--- a/drivers/w1/slaves/w1_ds2413.c ++++ b/drivers/w1/slaves/w1_ds2413.c +@@ -30,6 +30,9 @@ static ssize_t state_read(struct file *f + size_t count) + { + struct w1_slave *sl = kobj_to_w1_slave(kobj); ++ unsigned int retries = W1_F3A_RETRIES; ++ ssize_t bytes_read = -EIO; ++ + dev_dbg(&sl->dev, + "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", + bin_attr->attr.name, kobj, (unsigned int)off, count, buf); +@@ -42,22 +45,30 @@ static ssize_t state_read(struct file *f + mutex_lock(&sl->master->bus_mutex); + dev_dbg(&sl->dev, "mutex locked"); + +- if (w1_reset_select_slave(sl)) { +- mutex_unlock(&sl->master->bus_mutex); +- return -EIO; +- } ++ if (w1_reset_select_slave(sl)) ++ goto out; + +- w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ); +- *buf = w1_read_8(sl->master); ++ while (retries--) { ++ w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ); + +- mutex_unlock(&sl->master->bus_mutex); +- dev_dbg(&sl->dev, "mutex unlocked"); ++ *buf = w1_read_8(sl->master); ++ /* check for correct complement */ ++ if ((*buf & 0x0F) == ((~*buf >> 4) & 0x0F)) { ++ bytes_read = 1; ++ goto out; ++ } ++ ++ if (w1_reset_resume_command(sl->master)) ++ goto out; /* unrecoverable error */ + +- /* check for correct complement */ +- if ((*buf & 0x0F) != ((~*buf >> 4) & 0x0F)) +- return -EIO; +- else +- return 1; ++ dev_warn(&sl->dev, "PIO_ACCESS_READ error, retries left: %d\n", retries); ++ } ++ ++out: ++ mutex_unlock(&sl->master->bus_mutex); ++ dev_dbg(&sl->dev, "%s, mutex unlocked, retries: %d\n", ++ (bytes_read > 0) ? "succeeded" : "error", retries); ++ return bytes_read; + } + + static BIN_ATTR_RO(state, 1); diff --git a/target/linux/brcm2708/patches-4.19/950-0619-drm-vc4-Correct-SAND-support-for-FKMS.patch b/target/linux/brcm2708/patches-4.19/950-0619-drm-vc4-Correct-SAND-support-for-FKMS.patch deleted file mode 100644 index 07ecf6ef8e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0619-drm-vc4-Correct-SAND-support-for-FKMS.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 0dbdeb9e76e956df275e162224e12eacb0cc8b02 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 29 May 2019 15:44:11 +0100 -Subject: [PATCH 619/806] drm/vc4: Correct SAND support for FKMS. - -It was accepting NV21 which doesn't map through, but -also wasn't advertising the modifier so nothing would know -to request it. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -545,7 +545,6 @@ static bool vc4_fkms_format_mod_supporte - return false; - } - case DRM_FORMAT_NV12: -- case DRM_FORMAT_NV21: - switch (fourcc_mod_broadcom_mod(modifier)) { - case DRM_FORMAT_MOD_LINEAR: - case DRM_FORMAT_MOD_BROADCOM_SAND128: -@@ -553,6 +552,7 @@ static bool vc4_fkms_format_mod_supporte - default: - return false; - } -+ case DRM_FORMAT_NV21: - case DRM_FORMAT_RGB888: - case DRM_FORMAT_BGR888: - case DRM_FORMAT_YUV422: -@@ -599,6 +599,7 @@ static struct drm_plane *vc4_fkms_plane_ - * would prefer to scan out linear (less bus traffic). - */ - DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED, -+ DRM_FORMAT_MOD_BROADCOM_SAND128, - DRM_FORMAT_MOD_INVALID, - }; - int i; diff --git a/target/linux/brcm2708/patches-4.19/950-0619-w1-ds2413-when-the-slave-is-not-responding-during-re.patch b/target/linux/brcm2708/patches-4.19/950-0619-w1-ds2413-when-the-slave-is-not-responding-during-re.patch new file mode 100644 index 0000000000..9d7a94159e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0619-w1-ds2413-when-the-slave-is-not-responding-during-re.patch @@ -0,0 +1,56 @@ +From c84676e57896fedb47a69739fb82bb9941f624c4 Mon Sep 17 00:00:00 2001 +From: Mariusz Bialonczyk +Date: Wed, 22 May 2019 12:40:53 +0200 +Subject: [PATCH] w1: ds2413: when the slave is not responding during + read, select it again + +commit 3856032a0628e6b94badb9131a706dda185e071d upstream. + +The protocol is not allowing to obtain a byte of 0xff for PIO_ACCESS_READ +call. It is very likely that the slave was not addressed properly and +it is just not respoding (leaving the bus in logic high state) during +the read of sampled PIO value. +We cannot just call w1_reset_resume_command() because the problem will +persist, instead try selecting (addressing) the slave again. + +Signed-off-by: Mariusz Bialonczyk +Signed-off-by: Greg Kroah-Hartman +--- + drivers/w1/slaves/w1_ds2413.c | 9 ++++++++- + 1 file changed, 8 insertions(+), 1 deletion(-) + +--- a/drivers/w1/slaves/w1_ds2413.c ++++ b/drivers/w1/slaves/w1_ds2413.c +@@ -24,6 +24,7 @@ + #define W1_F3A_FUNC_PIO_ACCESS_READ 0xF5 + #define W1_F3A_FUNC_PIO_ACCESS_WRITE 0x5A + #define W1_F3A_SUCCESS_CONFIRM_BYTE 0xAA ++#define W1_F3A_INVALID_PIO_STATE 0xFF + + static ssize_t state_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, loff_t off, +@@ -45,6 +46,7 @@ static ssize_t state_read(struct file *f + mutex_lock(&sl->master->bus_mutex); + dev_dbg(&sl->dev, "mutex locked"); + ++next: + if (w1_reset_select_slave(sl)) + goto out; + +@@ -52,10 +54,15 @@ static ssize_t state_read(struct file *f + w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ); + + *buf = w1_read_8(sl->master); +- /* check for correct complement */ + if ((*buf & 0x0F) == ((~*buf >> 4) & 0x0F)) { ++ /* complement is correct */ + bytes_read = 1; + goto out; ++ } else if (*buf == W1_F3A_INVALID_PIO_STATE) { ++ /* slave didn't respond, try to select it again */ ++ dev_warn(&sl->dev, "slave device did not respond to PIO_ACCESS_READ, " \ ++ "reselecting, retries left: %d\n", retries); ++ goto next; + } + + if (w1_reset_resume_command(sl->master)) diff --git a/target/linux/brcm2708/patches-4.19/950-0620-drm-vc4-fkms-to-query-the-VPU-for-HDMI-clock-limits.patch b/target/linux/brcm2708/patches-4.19/950-0620-drm-vc4-fkms-to-query-the-VPU-for-HDMI-clock-limits.patch deleted file mode 100644 index a228910d24..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0620-drm-vc4-fkms-to-query-the-VPU-for-HDMI-clock-limits.patch +++ /dev/null @@ -1,134 +0,0 @@ -From 23e6a2c2d33050255c76a499ea080e5279d6edfc Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 30 May 2019 13:56:15 +0100 -Subject: [PATCH 620/806] drm/vc4: fkms to query the VPU for HDMI clock limits - -The VPU has configured clocks for 4k (or not) via config.txt, -and will limit the choice of video modes based on that. -Make fkms query it for these limits too to avoid selecting modes -that can not be handled by the current clock setup. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_drv.h | 1 + - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 48 ++++++++++++++++++++++ - include/soc/bcm2835/raspberrypi-firmware.h | 1 + - 3 files changed, 50 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -77,6 +77,7 @@ struct vc4_dev { - struct vc4_dsi *dsi1; - struct vc4_vec *vec; - struct vc4_txp *txp; -+ struct vc4_fkms *fkms; - - struct vc4_hang_state *hang_state; - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -29,6 +29,14 @@ - #include "vc_image_types.h" - #include - -+struct get_display_cfg { -+ u32 max_pixel_clock[2]; //Max pixel clock for each display -+}; -+ -+struct vc4_fkms { -+ struct get_display_cfg cfg; -+}; -+ - #define PLANES_PER_CRTC 3 - - struct set_plane { -@@ -794,6 +802,11 @@ static void vc4_crtc_enable(struct drm_c - static enum drm_mode_status - vc4_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode) - { -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ struct drm_device *dev = crtc->dev; -+ struct vc4_dev *vc4 = to_vc4_dev(dev); -+ struct vc4_fkms *fkms = vc4->fkms; -+ - /* Do not allow doublescan modes from user space */ - if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { - DRM_DEBUG_KMS("[CRTC:%d] Doublescan mode rejected.\n", -@@ -801,6 +814,22 @@ vc4_crtc_mode_valid(struct drm_crtc *crt - return MODE_NO_DBLESCAN; - } - -+ /* Limit the pixel clock based on the HDMI clock limits from the -+ * firmware -+ */ -+ switch (vc4_crtc->display_number) { -+ case 2: /* HDMI0 */ -+ if (fkms->cfg.max_pixel_clock[0] && -+ mode->clock > fkms->cfg.max_pixel_clock[0]) -+ return MODE_CLOCK_HIGH; -+ break; -+ case 7: /* HDMI1 */ -+ if (fkms->cfg.max_pixel_clock[1] && -+ mode->clock > fkms->cfg.max_pixel_clock[1]) -+ return MODE_CLOCK_HIGH; -+ break; -+ } -+ - /* Limit the pixel clock until we can get dynamic HDMI 2.0 scrambling - * working. - */ -@@ -1301,11 +1330,16 @@ static int vc4_fkms_bind(struct device * - struct device_node *firmware_node; - struct vc4_crtc **crtc_list; - u32 num_displays, display_num; -+ struct vc4_fkms *fkms; - int ret; - u32 display_id; - - vc4->firmware_kms = true; - -+ fkms = devm_kzalloc(dev, sizeof(*fkms), GFP_KERNEL); -+ if (!fkms) -+ return -ENOMEM; -+ - /* firmware kms doesn't have precise a scanoutpos implementation, so - * we can't do the precise vblank timestamp mode. - */ -@@ -1334,6 +1368,18 @@ static int vc4_fkms_bind(struct device * - ret = 0; - } - -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_GET_DISPLAY_CFG, -+ &fkms->cfg, sizeof(fkms->cfg)); -+ -+ if (ret) -+ return -EINVAL; -+ /* The firmware works in Hz. This will be compared against kHz, so div -+ * 1000 now rather than multiple times later. -+ */ -+ fkms->cfg.max_pixel_clock[0] /= 1000; -+ fkms->cfg.max_pixel_clock[1] /= 1000; -+ - /* Allocate a list, with space for a NULL on the end */ - crtc_list = devm_kzalloc(dev, sizeof(crtc_list) * (num_displays + 1), - GFP_KERNEL); -@@ -1375,6 +1421,8 @@ static int vc4_fkms_bind(struct device * - DRM_WARN("No displays found. Consider forcing hotplug if HDMI is attached\n"); - } - -+ vc4->fkms = fkms; -+ - platform_set_drvdata(pdev, crtc_list); - - return 0; ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -153,6 +153,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_SET_PLANE = 0x00048015, - RPI_FIRMWARE_GET_DISPLAY_TIMING = 0x00040017, - RPI_FIRMWARE_SET_TIMING = 0x00048017, -+ RPI_FIRMWARE_GET_DISPLAY_CFG = 0x00040018, - - RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, - RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, diff --git a/target/linux/brcm2708/patches-4.19/950-0620-w1-ds2413-fix-state-byte-comparision.patch b/target/linux/brcm2708/patches-4.19/950-0620-w1-ds2413-fix-state-byte-comparision.patch new file mode 100644 index 0000000000..3d3b74efc2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0620-w1-ds2413-fix-state-byte-comparision.patch @@ -0,0 +1,48 @@ +From 38ca046063ee6fcef66c9c3bec5844a65f9d48d9 Mon Sep 17 00:00:00 2001 +From: Mariusz Bialonczyk +Date: Thu, 30 May 2019 09:51:25 +0200 +Subject: [PATCH] w1: ds2413: fix state byte comparision + +commit aacd152ecd7b18af5d2d96dea9e7284c1c93abea upstream. + +This commit is fixing a smatch warning: +drivers/w1/slaves/w1_ds2413.c:61 state_read() warn: impossible condition '(*buf == 255) => ((-128)-127 == 255)' +by creating additional u8 variable for the bus reading and comparision + +Reported-by: kbuild test robot +Reported-by: Dan Carpenter +Cc: Dan Carpenter +Fixes: 3856032a0628 ("w1: ds2413: when the slave is not responding during read, select it again") +Signed-off-by: Mariusz Bialonczyk +Signed-off-by: Greg Kroah-Hartman +--- + drivers/w1/slaves/w1_ds2413.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/drivers/w1/slaves/w1_ds2413.c ++++ b/drivers/w1/slaves/w1_ds2413.c +@@ -33,6 +33,7 @@ static ssize_t state_read(struct file *f + struct w1_slave *sl = kobj_to_w1_slave(kobj); + unsigned int retries = W1_F3A_RETRIES; + ssize_t bytes_read = -EIO; ++ u8 state; + + dev_dbg(&sl->dev, + "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", +@@ -53,12 +54,13 @@ next: + while (retries--) { + w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ); + +- *buf = w1_read_8(sl->master); +- if ((*buf & 0x0F) == ((~*buf >> 4) & 0x0F)) { ++ state = w1_read_8(sl->master); ++ if ((state & 0x0F) == ((~state >> 4) & 0x0F)) { + /* complement is correct */ ++ *buf = state; + bytes_read = 1; + goto out; +- } else if (*buf == W1_F3A_INVALID_PIO_STATE) { ++ } else if (state == W1_F3A_INVALID_PIO_STATE) { + /* slave didn't respond, try to select it again */ + dev_warn(&sl->dev, "slave device did not respond to PIO_ACCESS_READ, " \ + "reselecting, retries left: %d\n", retries); diff --git a/target/linux/brcm2708/patches-4.19/950-0621-drm-vc4-Max-resolution-of-7680-is-conditional-on-bei.patch b/target/linux/brcm2708/patches-4.19/950-0621-drm-vc4-Max-resolution-of-7680-is-conditional-on-bei.patch deleted file mode 100644 index 0b45bb1ae7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0621-drm-vc4-Max-resolution-of-7680-is-conditional-on-bei.patch +++ /dev/null @@ -1,38 +0,0 @@ -From bce8c3dc146e3287519d5f6bb965dc2458e6684d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 30 May 2019 15:55:15 +0100 -Subject: [PATCH 621/806] drm/vc4: Max resolution of 7680 is conditional on - being Pi4 - -The max resolution had been increased from 2048 to 7680 for all -platforms. This code is common with Pi0-3 which have a max render -target for GL of 2048, therefore the increased resolution has to -be conditional on the platform. -Switch based on whether the bcm2835-v3d node is found, as that is -not present on Pi4. (There is a potential configuration on Pi0-3 -with no v3d, but this is very unlikely). - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_kms.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_kms.c -@@ -429,8 +429,14 @@ int vc4_kms_load(struct drm_device *dev) - return ret; - } - -- dev->mode_config.max_width = 7680; -- dev->mode_config.max_height = 7680; -+ if (!drm_core_check_feature(dev, DRIVER_RENDER)) { -+ /* No V3D as part of vc4. Assume this is Pi4. */ -+ dev->mode_config.max_width = 7680; -+ dev->mode_config.max_height = 7680; -+ } else { -+ dev->mode_config.max_width = 2048; -+ dev->mode_config.max_height = 2048; -+ } - dev->mode_config.funcs = &vc4_mode_funcs; - dev->mode_config.preferred_depth = 24; - dev->mode_config.async_page_flip = true; diff --git a/target/linux/brcm2708/patches-4.19/950-0621-drm-vc4_dsi-Fix-DMA-channel-and-memory-leak-in-vc4-3.patch b/target/linux/brcm2708/patches-4.19/950-0621-drm-vc4_dsi-Fix-DMA-channel-and-memory-leak-in-vc4-3.patch new file mode 100644 index 0000000000..63b8e8bdb3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0621-drm-vc4_dsi-Fix-DMA-channel-and-memory-leak-in-vc4-3.patch @@ -0,0 +1,135 @@ +From 496b26b154da9a962a5310641d8f4b73200fe590 Mon Sep 17 00:00:00 2001 +From: Chris Miller +Date: Wed, 26 Jun 2019 10:40:30 +0100 +Subject: [PATCH] drm: vc4_dsi: Fix DMA channel and memory leak in vc4 + (#3012) + +Signed-off-by: Chris G Miller +--- + drivers/gpu/drm/vc4/vc4_dsi.c | 35 ++++++++++++++++++++++++----------- + 1 file changed, 24 insertions(+), 11 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_dsi.c ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -1536,9 +1536,11 @@ static int vc4_dsi_bind(struct device *d + /* DSI1 has a broken AXI slave that doesn't respond to writes + * from the ARM. It does handle writes from the DMA engine, + * so set up a channel for talking to it. ++ * Where possible managed resource providers are used, but the DMA channel ++ * must - if acquired - be explicitly released prior to taking an error exit path. + */ + if (dsi->port == 1) { +- dsi->reg_dma_mem = dma_alloc_coherent(dev, 4, ++ dsi->reg_dma_mem = dmam_alloc_coherent(dev, 4, + &dsi->reg_dma_paddr, + GFP_KERNEL); + if (!dsi->reg_dma_mem) { +@@ -1557,6 +1559,8 @@ static int vc4_dsi_bind(struct device *d + return ret; + } + ++ /* From here on, any error exits must release the dma channel */ ++ + /* Get the physical address of the device's registers. The + * struct resource for the regs gives us the bus address + * instead. +@@ -1583,7 +1587,7 @@ static int vc4_dsi_bind(struct device *d + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to get interrupt: %d\n", ret); +- return ret; ++ goto rel_dma_exit; + } + + dsi->escape_clock = devm_clk_get(dev, "escape"); +@@ -1591,7 +1595,7 @@ static int vc4_dsi_bind(struct device *d + ret = PTR_ERR(dsi->escape_clock); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to get escape clock: %d\n", ret); +- return ret; ++ goto rel_dma_exit; + } + + dsi->pll_phy_clock = devm_clk_get(dev, "phy"); +@@ -1599,7 +1603,7 @@ static int vc4_dsi_bind(struct device *d + ret = PTR_ERR(dsi->pll_phy_clock); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to get phy clock: %d\n", ret); +- return ret; ++ goto rel_dma_exit; + } + + dsi->pixel_clock = devm_clk_get(dev, "pixel"); +@@ -1607,7 +1611,7 @@ static int vc4_dsi_bind(struct device *d + ret = PTR_ERR(dsi->pixel_clock); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to get pixel clock: %d\n", ret); +- return ret; ++ goto rel_dma_exit; + } + + ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, +@@ -1622,26 +1626,28 @@ static int vc4_dsi_bind(struct device *d + if (ret == -ENODEV) + return 0; + +- return ret; ++ goto rel_dma_exit; + } + + if (panel) { + dsi->bridge = devm_drm_panel_bridge_add(dev, panel, + DRM_MODE_CONNECTOR_DSI); +- if (IS_ERR(dsi->bridge)) +- return PTR_ERR(dsi->bridge); ++ if (IS_ERR(dsi->bridge)){ ++ ret = PTR_ERR(dsi->bridge); ++ goto rel_dma_exit; ++ } + } + + /* The esc clock rate is supposed to always be 100Mhz. */ + ret = clk_set_rate(dsi->escape_clock, 100 * 1000000); + if (ret) { + dev_err(dev, "Failed to set esc clock: %d\n", ret); +- return ret; ++ goto rel_dma_exit; + } + + ret = vc4_dsi_init_phy_clocks(dsi); + if (ret) +- return ret; ++ goto rel_dma_exit; + + if (dsi->port == 1) + vc4->dsi1 = dsi; +@@ -1653,7 +1659,7 @@ static int vc4_dsi_bind(struct device *d + ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL); + if (ret) { + dev_err(dev, "bridge attach failed: %d\n", ret); +- return ret; ++ goto rel_dma_exit; + } + /* Disable the atomic helper calls into the bridge. We + * manually call the bridge pre_enable / enable / etc. calls +@@ -1665,6 +1671,11 @@ static int vc4_dsi_bind(struct device *d + pm_runtime_enable(dev); + + return 0; ++ ++rel_dma_exit: ++ dma_release_channel(dsi->reg_dma_chan); ++ ++ return ret; + } + + static void vc4_dsi_unbind(struct device *dev, struct device *master, +@@ -1679,6 +1690,8 @@ static void vc4_dsi_unbind(struct device + + vc4_dsi_encoder_destroy(dsi->encoder); + ++ dma_release_channel(dsi->reg_dma_chan); ++ + if (dsi->port == 1) + vc4->dsi1 = NULL; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0622-staging-vc-sm-cma-Remove-obsolete-comment-and-make-f.patch b/target/linux/brcm2708/patches-4.19/950-0622-staging-vc-sm-cma-Remove-obsolete-comment-and-make-f.patch deleted file mode 100644 index 468b21e939..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0622-staging-vc-sm-cma-Remove-obsolete-comment-and-make-f.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 84b54ee2ff01005f0201c51f50985faf4e79edc6 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 10 Dec 2018 17:35:58 +0000 -Subject: [PATCH 622/806] staging: vc-sm-cma: Remove obsolete comment and make - function static - -Removes obsolete comment about wanting to pass a function -pointer into mmal-vchiq as we now do. -As the function is passed as a function pointer, the function itself -can be static. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -594,8 +594,7 @@ error: - return ret; - } - --/* FIXME: Pass a function pointer to this into vc_vchi_sm.c */ --void -+static void - vc_sm_vpu_event(struct sm_instance *instance, struct vc_sm_result_t *reply, - int reply_len) - { diff --git a/target/linux/brcm2708/patches-4.19/950-0622-video-bcm2708_fb-Revert-cma-allocation-attempt.patch b/target/linux/brcm2708/patches-4.19/950-0622-video-bcm2708_fb-Revert-cma-allocation-attempt.patch new file mode 100644 index 0000000000..1eed4f7277 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0622-video-bcm2708_fb-Revert-cma-allocation-attempt.patch @@ -0,0 +1,159 @@ +From b3fe618a47d770f6c9808ade14360fd81a599789 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 19 Jun 2019 03:55:50 +0100 +Subject: [PATCH] video/bcm2708_fb: Revert cma allocation attempt + +"4600e91 Pulled in the multi frame buffer support from the Pi3 repo" +pulled back in the code for allocating the framebuffer from the CMA +heap. +Revert it again. + +Signed-off-by: Dave Stevenson +--- + drivers/video/fbdev/bcm2708_fb.c | 101 +++------------------ + include/soc/bcm2835/raspberrypi-firmware.h | 1 - + 2 files changed, 13 insertions(+), 89 deletions(-) + +--- a/drivers/video/fbdev/bcm2708_fb.c ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -112,9 +112,6 @@ struct bcm2708_fb { + struct vc4_display_settings_t display_settings; + struct debugfs_regset32 screeninfo_regset; + struct bcm2708_fb_dev *fbdev; +- unsigned int image_size; +- dma_addr_t dma_addr; +- void *cpuaddr; + }; + + #define MAX_FRAMEBUFFERS 3 +@@ -377,12 +374,12 @@ static int bcm2708_fb_set_par(struct fb_ + .xoffset = info->var.xoffset, + .yoffset = info->var.yoffset, + .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, +- /* base and screen_size will be initialised later */ +- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, +- /* pitch will be initialised later */ ++ .base = 0, ++ .screen_size = 0, ++ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, ++ .pitch = 0, + }; +- int ret, image_size; +- ++ int ret; + + print_debug("%s(%p) %dx%d (%dx%d), %d, %d (display %d)\n", __func__, + info, +@@ -397,76 +394,12 @@ static int bcm2708_fb_set_par(struct fb_ + */ + set_display_num(fb); + +- /* Try allocating our own buffer. We can specify all the parameters */ +- image_size = ((info->var.xres * info->var.yres) * +- info->var.bits_per_pixel) >> 3; +- +- if (!fb->fbdev->disable_arm_alloc && +- (image_size != fb->image_size || !fb->dma_addr)) { +- if (fb->dma_addr) { +- dma_free_coherent(info->device, fb->image_size, +- fb->cpuaddr, fb->dma_addr); +- fb->image_size = 0; +- fb->cpuaddr = NULL; +- fb->dma_addr = 0; +- } +- +- fb->cpuaddr = dma_alloc_coherent(info->device, image_size, +- &fb->dma_addr, GFP_KERNEL); +- +- if (!fb->cpuaddr) { +- fb->dma_addr = 0; +- fb->fbdev->disable_arm_alloc = true; +- } else { +- fb->image_size = image_size; +- } +- } +- +- if (fb->cpuaddr) { +- fbinfo.base = fb->dma_addr; +- fbinfo.screen_size = image_size; +- fbinfo.pitch = (info->var.xres * info->var.bits_per_pixel) >> 3; +- +- ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, +- sizeof(fbinfo)); +- if (ret || fbinfo.base != fb->dma_addr) { +- /* Firmware either failed, or assigned a different base +- * address (ie it doesn't support being passed an FB +- * allocation). +- * Destroy the allocation, and don't try again. +- */ +- dma_free_coherent(info->device, fb->image_size, +- fb->cpuaddr, fb->dma_addr); +- fb->image_size = 0; +- fb->cpuaddr = NULL; +- fb->dma_addr = 0; +- fb->fbdev->disable_arm_alloc = true; +- } +- } else { +- /* Our allocation failed - drop into the old scheme of +- * allocation by the VPU. +- */ +- ret = -ENOMEM; +- } +- ++ ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, ++ sizeof(fbinfo)); + if (ret) { +- /* Old scheme: +- * - FRAMEBUFFER_ALLOCATE passes 0 for base and screen_size. +- * - GET_PITCH instead of SET_PITCH. +- */ +- fbinfo.base = 0; +- fbinfo.screen_size = 0; +- fbinfo.tag6.tag = RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH; +- fbinfo.pitch = 0; +- +- ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, +- sizeof(fbinfo)); +- if (ret) { +- dev_err(info->device, +- "Failed to allocate GPU framebuffer (%d)\n", +- ret); +- return ret; +- } ++ dev_err(info->device, ++ "Failed to allocate GPU framebuffer (%d)\n", ret); ++ return ret; + } + + if (info->var.bits_per_pixel <= 8) +@@ -481,17 +414,9 @@ static int bcm2708_fb_set_par(struct fb_ + fb->fb.fix.smem_start = fbinfo.base; + fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; + fb->fb.screen_size = fbinfo.screen_size; +- +- if (!fb->dma_addr) { +- if (fb->fb.screen_base) +- iounmap(fb->fb.screen_base); +- +- fb->fb.screen_base = ioremap_wc(fbinfo.base, +- fb->fb.screen_size); +- } else { +- fb->fb.screen_base = fb->cpuaddr; +- } +- ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); + if (!fb->fb.screen_base) { + /* the console may currently be locked */ + console_trylock(); +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -138,7 +138,6 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, + RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, + RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, +- RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, diff --git a/target/linux/brcm2708/patches-4.19/950-0623-drm-vc4-Add-support-for-color-encoding-on-YUV-planes.patch b/target/linux/brcm2708/patches-4.19/950-0623-drm-vc4-Add-support-for-color-encoding-on-YUV-planes.patch new file mode 100644 index 0000000000..ad3732d484 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0623-drm-vc4-Add-support-for-color-encoding-on-YUV-planes.patch @@ -0,0 +1,110 @@ +From ee96684cb2f528ad1036ae9a9126c9118a80dfbe Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 24 Jun 2019 02:29:40 +0100 +Subject: [PATCH] drm/vc4: Add support for color encoding on YUV planes + +Adds signalling for BT601/709/2020, and limited/full range +(on BT601). + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 32 +++++++++++++++++++++++++- + drivers/gpu/drm/vc4/vc_image_types.h | 28 ++++++++++++++++++++++ + 2 files changed, 59 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -66,7 +66,7 @@ struct set_plane { + u8 alpha; + u8 num_planes; + u8 is_vu; +- u8 padding; ++ u8 color_encoding; + + u32 planes[4]; /* DMA address of each plane */ + +@@ -454,6 +454,28 @@ static void vc4_plane_atomic_update(stru + if (num_planes == 3 && + (fb->offsets[2] - fb->offsets[1]) == fb->pitches[1]) + mb->plane.vc_image_type = VC_IMAGE_YUV420_S; ++ ++ switch (state->color_encoding) { ++ default: ++ case DRM_COLOR_YCBCR_BT601: ++ if (state->color_range == DRM_COLOR_YCBCR_LIMITED_RANGE) ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT601; ++ else ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF; ++ break; ++ case DRM_COLOR_YCBCR_BT709: ++ /* Currently no support for a full range BT709 */ ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT709; ++ break; ++ case DRM_COLOR_YCBCR_BT2020: ++ /* Currently no support for a full range BT2020 */ ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_REC_2020; ++ break; ++ } + } else { + mb->plane.planes[1] = 0; + mb->plane.planes[2] = 0; +@@ -643,6 +665,14 @@ static struct drm_plane *vc4_fkms_plane_ + drm_plane_create_alpha_property(plane); + drm_plane_create_rotation_property(plane, DRM_MODE_ROTATE_0, + SUPPORTED_ROTATIONS); ++ drm_plane_create_color_properties(plane, ++ BIT(DRM_COLOR_YCBCR_BT601) | ++ BIT(DRM_COLOR_YCBCR_BT709) | ++ BIT(DRM_COLOR_YCBCR_BT2020), ++ BIT(DRM_COLOR_YCBCR_LIMITED_RANGE) | ++ BIT(DRM_COLOR_YCBCR_FULL_RANGE), ++ DRM_COLOR_YCBCR_BT709, ++ DRM_COLOR_YCBCR_LIMITED_RANGE); + + /* + * Default frame buffer setup is with FB on -127, and raspistill etc +--- a/drivers/gpu/drm/vc4/vc_image_types.h ++++ b/drivers/gpu/drm/vc4/vc_image_types.h +@@ -4,6 +4,8 @@ + * + * Values taken from vc_image_types.h released by Broadcom at + * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_types.h ++ * and vc_image_structs.h at ++ * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_structs.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +@@ -141,3 +143,29 @@ enum { + VC_IMAGE_MAX, /* bounds for error checking */ + VC_IMAGE_FORCE_ENUM_16BIT = 0xffff, + }; ++ ++enum { ++ /* Unknown or unset - defaults to BT601 interstitial */ ++ VC_IMAGE_YUVINFO_UNSPECIFIED = 0, ++ ++ /* colour-space conversions data [4 bits] */ ++ ++ /* ITU-R BT.601-5 [SDTV] (compatible with VideoCore-II) */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT601 = 1, ++ /* ITU-R BT.709-3 [HDTV] */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT709 = 2, ++ /* JPEG JFIF */ ++ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF = 3, ++ /* Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ ++ VC_IMAGE_YUVINFO_CSC_FCC = 4, ++ /* Society of Motion Picture and Television Engineers 240M (1999) */ ++ VC_IMAGE_YUVINFO_CSC_SMPTE_240M = 5, ++ /* ITU-R BT.470-2 System M */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT470_2_M = 6, ++ /* ITU-R BT.470-2 System B,G */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT470_2_BG = 7, ++ /* JPEG JFIF, but with 16..255 luma */ ++ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF_Y16_255 = 8, ++ /* Rec 2020 */ ++ VC_IMAGE_YUVINFO_CSC_REC_2020 = 9, ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0623-staging-vc-sm-cma-Add-in-allocation-for-VPU-requests.patch b/target/linux/brcm2708/patches-4.19/950-0623-staging-vc-sm-cma-Add-in-allocation-for-VPU-requests.patch deleted file mode 100644 index f7501a184c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0623-staging-vc-sm-cma-Add-in-allocation-for-VPU-requests.patch +++ /dev/null @@ -1,1206 +0,0 @@ -From 275f4673d8c0601e5dbb16e743187d264e7dbed6 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 21 Dec 2018 16:50:53 +0000 -Subject: [PATCH 623/806] staging: vc-sm-cma: Add in allocation for VPU - requests. - -Module has to change from tristate to bool as all CMA functions -are boolean. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/vc-sm-cma/Kconfig | 4 +- - .../staging/vc04_services/vc-sm-cma/Makefile | 2 +- - .../staging/vc04_services/vc-sm-cma/vc_sm.c | 642 +++++++++++++++--- - .../staging/vc04_services/vc-sm-cma/vc_sm.h | 30 +- - .../vc04_services/vc-sm-cma/vc_sm_cma.c | 99 +++ - .../vc04_services/vc-sm-cma/vc_sm_cma.h | 39 ++ - .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 10 + - .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.h | 4 + - .../vc04_services/vc-sm-cma/vc_sm_defs.h | 2 + - 9 files changed, 723 insertions(+), 109 deletions(-) - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c - create mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h - ---- a/drivers/staging/vc04_services/vc-sm-cma/Kconfig -+++ b/drivers/staging/vc04_services/vc-sm-cma/Kconfig -@@ -1,6 +1,6 @@ - config BCM_VC_SM_CMA -- tristate "VideoCore Shared Memory (CMA) driver" -- depends on BCM2835_VCHIQ -+ bool "VideoCore Shared Memory (CMA) driver" -+ depends on BCM2835_VCHIQ && DMA_CMA - select RBTREE - select DMA_SHARED_BUFFER - help ---- a/drivers/staging/vc04_services/vc-sm-cma/Makefile -+++ b/drivers/staging/vc04_services/vc-sm-cma/Makefile -@@ -3,6 +3,6 @@ ccflags-y += -Idrivers/staging/vc04_serv - ccflags-y += -D__VCCOREVER__=0 - - vc-sm-cma-$(CONFIG_BCM_VC_SM_CMA) := \ -- vc_sm.o vc_sm_cma_vchi.o -+ vc_sm.o vc_sm_cma_vchi.o vc_sm_cma.o - - obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma.o ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -9,10 +9,21 @@ - * and taking some code for CMA/dmabuf handling from the Android Ion - * driver (Google/Linaro). - * -- * This is cut down version to only support import of dma_bufs from -- * other kernel drivers. A more complete implementation of the old -- * vmcs_sm functionality can follow later. - * -+ * This driver has 3 main uses: -+ * 1) Allocating buffers for the kernel or userspace that can be shared with the -+ * VPU. -+ * 2) Importing dmabufs from elsewhere for sharing with the VPU. -+ * 3) Allocating buffers for use by the VPU. -+ * -+ * In the first and second cases the native handle is a dmabuf. Releasing the -+ * resource inherently comes from releasing the dmabuf, and this will trigger -+ * unmapping on the VPU. The underlying allocation and our buffer structure are -+ * retained until the VPU has confirmed that it has finished with it. -+ * -+ * For the VPU allocations the VPU is responsible for triggering the release, -+ * and therefore the released message decrements the dma_buf refcount (with the -+ * VPU mapping having already been marked as released). - */ - - /* ---- Include Files ----------------------------------------------------- */ -@@ -39,6 +50,7 @@ - #include "vc_sm_cma_vchi.h" - - #include "vc_sm.h" -+#include "vc_sm_cma.h" - #include "vc_sm_knl.h" - - /* ---- Private Constants and Types --------------------------------------- */ -@@ -72,6 +84,7 @@ struct sm_state_t { - struct platform_device *pdev; - - struct sm_instance *sm_handle; /* Handle for videocore service. */ -+ struct cma *cma_heap; - - spinlock_t kernelid_map_lock; /* Spinlock protecting kernelid_map */ - struct idr kernelid_map; -@@ -80,6 +93,7 @@ struct sm_state_t { - struct list_head buffer_list; /* List of buffer. */ - - struct vc_sm_privdata_t *data_knl; /* Kernel internal data tracking. */ -+ struct vc_sm_privdata_t *vpu_allocs; /* All allocations from the VPU */ - struct dentry *dir_root; /* Debug fs entries root. */ - struct sm_pde_t dir_state; /* Debug fs entries state sub-tree. */ - -@@ -89,6 +103,12 @@ struct sm_state_t { - u32 int_trans_id; /* Interrupted transaction. */ - }; - -+struct vc_sm_dma_buf_attachment { -+ struct device *dev; -+ struct sg_table *table; -+ struct list_head list; -+}; -+ - /* ---- Private Variables ----------------------------------------------- */ - - static struct sm_state_t *sm_state; -@@ -172,12 +192,14 @@ static int vc_sm_cma_global_state_show(s - resource->size); - seq_printf(s, " DMABUF %p\n", - resource->dma_buf); -- seq_printf(s, " ATTACH %p\n", -- resource->attach); -+ if (resource->imported) { -+ seq_printf(s, " ATTACH %p\n", -+ resource->import.attach); -+ seq_printf(s, " SGT %p\n", -+ resource->import.sgt); -+ } - seq_printf(s, " SG_TABLE %p\n", - resource->sg_table); -- seq_printf(s, " SGT %p\n", -- resource->sgt); - seq_printf(s, " DMA_ADDR %pad\n", - &resource->dma_addr); - seq_printf(s, " VC_HANDLE %08x\n", -@@ -209,17 +231,33 @@ static void vc_sm_add_resource(struct vc - } - - /* -- * Release an allocation. -- * All refcounting is done via the dma buf object. -+ * Cleans up imported dmabuf. - */ --static void vc_sm_release_resource(struct vc_sm_buffer *buffer, int force) -+static void vc_sm_clean_up_dmabuf(struct vc_sm_buffer *buffer) - { -- mutex_lock(&sm_state->map_lock); -- mutex_lock(&buffer->lock); -+ if (!buffer->imported) -+ return; - -- pr_debug("[%s]: buffer %p (name %s, size %zu)\n", -- __func__, buffer, buffer->name, buffer->size); -+ /* Handle cleaning up imported dmabufs */ -+ mutex_lock(&buffer->lock); -+ if (buffer->import.sgt) { -+ dma_buf_unmap_attachment(buffer->import.attach, -+ buffer->import.sgt, -+ DMA_BIDIRECTIONAL); -+ buffer->import.sgt = NULL; -+ } -+ if (buffer->import.attach) { -+ dma_buf_detach(buffer->dma_buf, buffer->import.attach); -+ buffer->import.attach = NULL; -+ } -+ mutex_unlock(&buffer->lock); -+} - -+/* -+ * Instructs VPU to decrement the refcount on a buffer. -+ */ -+static void vc_sm_vpu_free(struct vc_sm_buffer *buffer) -+{ - if (buffer->vc_handle && buffer->vpu_state == VPU_MAPPED) { - struct vc_sm_free_t free = { buffer->vc_handle, 0 }; - int status = vc_sm_cma_vchi_free(sm_state->sm_handle, &free, -@@ -230,17 +268,32 @@ static void vc_sm_release_resource(struc - } - - if (sm_state->require_released_callback) { -- /* Need to wait for the VPU to confirm the free */ -+ /* Need to wait for the VPU to confirm the free. */ - - /* Retain a reference on this until the VPU has - * released it - */ - buffer->vpu_state = VPU_UNMAPPING; -- goto defer; -+ } else { -+ buffer->vpu_state = VPU_NOT_MAPPED; -+ buffer->vc_handle = 0; - } -- buffer->vpu_state = VPU_NOT_MAPPED; -- buffer->vc_handle = 0; - } -+} -+ -+/* -+ * Release an allocation. -+ * All refcounting is done via the dma buf object. -+ * -+ * Must be called with the mutex held. The function will either release the -+ * mutex (if defering the release) or destroy it. The caller must therefore not -+ * reuse the buffer on return. -+ */ -+static void vc_sm_release_resource(struct vc_sm_buffer *buffer) -+{ -+ pr_debug("[%s]: buffer %p (name %s, size %zu)\n", -+ __func__, buffer, buffer->name, buffer->size); -+ - if (buffer->vc_handle) { - /* We've sent the unmap request but not had the response. */ - pr_err("[%s]: Waiting for VPU unmap response on %p\n", -@@ -248,45 +301,43 @@ static void vc_sm_release_resource(struc - goto defer; - } - if (buffer->in_use) { -- /* Don't release dmabuf here - we await the release */ -+ /* dmabuf still in use - we await the release */ - pr_err("[%s]: buffer %p is still in use\n", - __func__, buffer); - goto defer; - } - -- /* Handle cleaning up imported dmabufs */ -- if (buffer->sgt) { -- dma_buf_unmap_attachment(buffer->attach, buffer->sgt, -- DMA_BIDIRECTIONAL); -- buffer->sgt = NULL; -- } -- if (buffer->attach) { -- dma_buf_detach(buffer->dma_buf, buffer->attach); -- buffer->attach = NULL; -- } -- -- /* Release the dma_buf (whether ours or imported) */ -- if (buffer->import_dma_buf) { -- dma_buf_put(buffer->import_dma_buf); -- buffer->import_dma_buf = NULL; -- buffer->dma_buf = NULL; -- } else if (buffer->dma_buf) { -- dma_buf_put(buffer->dma_buf); -- buffer->dma_buf = NULL; -+ /* Release the allocation (whether imported dmabuf or CMA allocation) */ -+ if (buffer->imported) { -+ pr_debug("%s: Release imported dmabuf %p\n", __func__, -+ buffer->import.dma_buf); -+ if (buffer->import.dma_buf) -+ dma_buf_put(buffer->import.dma_buf); -+ else -+ pr_err("%s: Imported dmabuf already been put for buf %p\n", -+ __func__, buffer); -+ buffer->import.dma_buf = NULL; -+ } else { -+ if (buffer->sg_table) { -+ /* Our own allocation that we need to dma_unmap_sg */ -+ dma_unmap_sg(&sm_state->pdev->dev, -+ buffer->sg_table->sgl, -+ buffer->sg_table->nents, -+ DMA_BIDIRECTIONAL); -+ } -+ pr_debug("%s: Release our allocation\n", __func__); -+ vc_sm_cma_buffer_free(&buffer->alloc); -+ pr_debug("%s: Release our allocation - done\n", __func__); - } - -- if (buffer->sg_table && !buffer->import_dma_buf) { -- /* Our own allocation that we need to dma_unmap_sg */ -- dma_unmap_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, -- buffer->sg_table->nents, DMA_BIDIRECTIONAL); -- } - -- /* Free the local resource. Start by removing it from the list */ -- buffer->private = NULL; -+ /* Free our buffer. Start by removing it from the list */ -+ mutex_lock(&sm_state->map_lock); - list_del(&buffer->global_buffer_list); -+ mutex_unlock(&sm_state->map_lock); - -+ pr_debug("%s: Release our allocation - done\n", __func__); - mutex_unlock(&buffer->lock); -- mutex_unlock(&sm_state->map_lock); - - mutex_destroy(&buffer->lock); - -@@ -295,7 +346,7 @@ static void vc_sm_release_resource(struc - - defer: - mutex_unlock(&buffer->lock); -- mutex_unlock(&sm_state->map_lock); -+ return; - } - - /* Create support for private data tracking. */ -@@ -317,16 +368,267 @@ static struct vc_sm_privdata_t *vc_sm_cm - return file_data; - } - -+static struct sg_table *dup_sg_table(struct sg_table *table) -+{ -+ struct sg_table *new_table; -+ int ret, i; -+ struct scatterlist *sg, *new_sg; -+ -+ new_table = kzalloc(sizeof(*new_table), GFP_KERNEL); -+ if (!new_table) -+ return ERR_PTR(-ENOMEM); -+ -+ ret = sg_alloc_table(new_table, table->nents, GFP_KERNEL); -+ if (ret) { -+ kfree(new_table); -+ return ERR_PTR(-ENOMEM); -+ } -+ -+ new_sg = new_table->sgl; -+ for_each_sg(table->sgl, sg, table->nents, i) { -+ memcpy(new_sg, sg, sizeof(*sg)); -+ sg->dma_address = 0; -+ new_sg = sg_next(new_sg); -+ } -+ -+ return new_table; -+} -+ -+static void free_duped_table(struct sg_table *table) -+{ -+ sg_free_table(table); -+ kfree(table); -+} -+ -+/* Dma buf operations for use with our own allocations */ -+ -+static int vc_sm_dma_buf_attach(struct dma_buf *dmabuf, -+ struct dma_buf_attachment *attachment) -+ -+{ -+ struct vc_sm_dma_buf_attachment *a; -+ struct sg_table *table; -+ struct vc_sm_buffer *buf = dmabuf->priv; -+ -+ a = kzalloc(sizeof(*a), GFP_KERNEL); -+ if (!a) -+ return -ENOMEM; -+ -+ table = dup_sg_table(buf->sg_table); -+ if (IS_ERR(table)) { -+ kfree(a); -+ return -ENOMEM; -+ } -+ -+ a->table = table; -+ INIT_LIST_HEAD(&a->list); -+ -+ attachment->priv = a; -+ -+ mutex_lock(&buf->lock); -+ list_add(&a->list, &buf->attachments); -+ mutex_unlock(&buf->lock); -+ pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); -+ -+ return 0; -+} -+ -+static void vc_sm_dma_buf_detatch(struct dma_buf *dmabuf, -+ struct dma_buf_attachment *attachment) -+{ -+ struct vc_sm_dma_buf_attachment *a = attachment->priv; -+ struct vc_sm_buffer *buf = dmabuf->priv; -+ -+ pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); -+ free_duped_table(a->table); -+ mutex_lock(&buf->lock); -+ list_del(&a->list); -+ mutex_unlock(&buf->lock); -+ -+ kfree(a); -+} -+ -+static struct sg_table *vc_sm_map_dma_buf(struct dma_buf_attachment *attachment, -+ enum dma_data_direction direction) -+{ -+ struct vc_sm_dma_buf_attachment *a = attachment->priv; -+ struct sg_table *table; -+ -+ table = a->table; -+ -+ if (!dma_map_sg(attachment->dev, table->sgl, table->nents, -+ direction)) -+ return ERR_PTR(-ENOMEM); -+ -+ pr_debug("%s attachment %p\n", __func__, attachment); -+ return table; -+} -+ -+static void vc_sm_unmap_dma_buf(struct dma_buf_attachment *attachment, -+ struct sg_table *table, -+ enum dma_data_direction direction) -+{ -+ pr_debug("%s attachment %p\n", __func__, attachment); -+ dma_unmap_sg(attachment->dev, table->sgl, table->nents, direction); -+} -+ -+static int vc_sm_dmabuf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma) -+{ -+ struct vc_sm_buffer *buf = dmabuf->priv; -+ struct sg_table *table = buf->sg_table; -+ unsigned long addr = vma->vm_start; -+ unsigned long offset = vma->vm_pgoff * PAGE_SIZE; -+ struct scatterlist *sg; -+ int i; -+ int ret = 0; -+ -+ pr_debug("%s dmabuf %p, buf %p, vm_start %08lX\n", __func__, dmabuf, -+ buf, addr); -+ -+ mutex_lock(&buf->lock); -+ -+ /* now map it to userspace */ -+ for_each_sg(table->sgl, sg, table->nents, i) { -+ struct page *page = sg_page(sg); -+ unsigned long remainder = vma->vm_end - addr; -+ unsigned long len = sg->length; -+ -+ if (offset >= sg->length) { -+ offset -= sg->length; -+ continue; -+ } else if (offset) { -+ page += offset / PAGE_SIZE; -+ len = sg->length - offset; -+ offset = 0; -+ } -+ len = min(len, remainder); -+ ret = remap_pfn_range(vma, addr, page_to_pfn(page), len, -+ vma->vm_page_prot); -+ if (ret) -+ break; -+ addr += len; -+ if (addr >= vma->vm_end) -+ break; -+ } -+ mutex_unlock(&buf->lock); -+ -+ if (ret) -+ pr_err("%s: failure mapping buffer to userspace\n", -+ __func__); -+ -+ return ret; -+} -+ -+static void vc_sm_dma_buf_release(struct dma_buf *dmabuf) -+{ -+ struct vc_sm_buffer *buffer; -+ -+ if (!dmabuf) -+ return; -+ -+ buffer = (struct vc_sm_buffer *)dmabuf->priv; -+ -+ mutex_lock(&buffer->lock); -+ -+ pr_debug("%s dmabuf %p, buffer %p\n", __func__, dmabuf, buffer); -+ -+ buffer->in_use = 0; -+ -+ /* Unmap on the VPU */ -+ vc_sm_vpu_free(buffer); -+ pr_debug("%s vpu_free done\n", __func__); -+ -+ /* Unmap our dma_buf object (the vc_sm_buffer remains until released -+ * on the VPU). -+ */ -+ vc_sm_clean_up_dmabuf(buffer); -+ pr_debug("%s clean_up dmabuf done\n", __func__); -+ -+ vc_sm_release_resource(buffer); -+ pr_debug("%s done\n", __func__); -+} -+ -+static int vc_sm_dma_buf_begin_cpu_access(struct dma_buf *dmabuf, -+ enum dma_data_direction direction) -+{ -+ struct vc_sm_buffer *buf; -+ struct vc_sm_dma_buf_attachment *a; -+ -+ if (!dmabuf) -+ return -EFAULT; -+ -+ buf = dmabuf->priv; -+ if (!buf) -+ return -EFAULT; -+ -+ mutex_lock(&buf->lock); -+ -+ list_for_each_entry(a, &buf->attachments, list) { -+ dma_sync_sg_for_cpu(a->dev, a->table->sgl, a->table->nents, -+ direction); -+ } -+ mutex_unlock(&buf->lock); -+ -+ return 0; -+} -+ -+static int vc_sm_dma_buf_end_cpu_access(struct dma_buf *dmabuf, -+ enum dma_data_direction direction) -+{ -+ struct vc_sm_buffer *buf; -+ struct vc_sm_dma_buf_attachment *a; -+ -+ if (!dmabuf) -+ return -EFAULT; -+ buf = dmabuf->priv; -+ if (!buf) -+ return -EFAULT; -+ -+ mutex_lock(&buf->lock); -+ -+ list_for_each_entry(a, &buf->attachments, list) { -+ dma_sync_sg_for_device(a->dev, a->table->sgl, a->table->nents, -+ direction); -+ } -+ mutex_unlock(&buf->lock); -+ -+ return 0; -+} -+ -+static void *vc_sm_dma_buf_kmap(struct dma_buf *dmabuf, unsigned long offset) -+{ -+ /* FIXME */ -+ return NULL; -+} -+ -+static void vc_sm_dma_buf_kunmap(struct dma_buf *dmabuf, unsigned long offset, -+ void *ptr) -+{ -+ /* FIXME */ -+} -+ -+static const struct dma_buf_ops dma_buf_ops = { -+ .map_dma_buf = vc_sm_map_dma_buf, -+ .unmap_dma_buf = vc_sm_unmap_dma_buf, -+ .mmap = vc_sm_dmabuf_mmap, -+ .release = vc_sm_dma_buf_release, -+ .attach = vc_sm_dma_buf_attach, -+ .detach = vc_sm_dma_buf_detatch, -+ .begin_cpu_access = vc_sm_dma_buf_begin_cpu_access, -+ .end_cpu_access = vc_sm_dma_buf_end_cpu_access, -+ .map = vc_sm_dma_buf_kmap, -+ .unmap = vc_sm_dma_buf_kunmap, -+}; - /* Dma_buf operations for chaining through to an imported dma_buf */ - static - int vc_sm_import_dma_buf_attach(struct dma_buf *dmabuf, - struct dma_buf_attachment *attachment) - { -- struct vc_sm_buffer *res = dmabuf->priv; -+ struct vc_sm_buffer *buf = dmabuf->priv; - -- if (!res->import_dma_buf) -+ if (!buf->imported) - return -EINVAL; -- return res->import_dma_buf->ops->attach(res->import_dma_buf, -+ return buf->import.dma_buf->ops->attach(buf->import.dma_buf, - attachment); - } - -@@ -334,22 +636,23 @@ static - void vc_sm_import_dma_buf_detatch(struct dma_buf *dmabuf, - struct dma_buf_attachment *attachment) - { -- struct vc_sm_buffer *res = dmabuf->priv; -+ struct vc_sm_buffer *buf = dmabuf->priv; - -- if (!res->import_dma_buf) -+ if (!buf->imported) - return; -- res->import_dma_buf->ops->detach(res->import_dma_buf, attachment); -+ buf->import.dma_buf->ops->detach(buf->import.dma_buf, attachment); - } - - static - struct sg_table *vc_sm_import_map_dma_buf(struct dma_buf_attachment *attachment, - enum dma_data_direction direction) - { -- struct vc_sm_buffer *res = attachment->dmabuf->priv; -+ struct vc_sm_buffer *buf = attachment->dmabuf->priv; - -- if (!res->import_dma_buf) -+ if (!buf->imported) - return NULL; -- return res->import_dma_buf->ops->map_dma_buf(attachment, direction); -+ return buf->import.dma_buf->ops->map_dma_buf(attachment, -+ direction); - } - - static -@@ -357,87 +660,88 @@ void vc_sm_import_unmap_dma_buf(struct d - struct sg_table *table, - enum dma_data_direction direction) - { -- struct vc_sm_buffer *res = attachment->dmabuf->priv; -+ struct vc_sm_buffer *buf = attachment->dmabuf->priv; - -- if (!res->import_dma_buf) -+ if (!buf->imported) - return; -- res->import_dma_buf->ops->unmap_dma_buf(attachment, table, direction); -+ buf->import.dma_buf->ops->unmap_dma_buf(attachment, table, direction); - } - - static - int vc_sm_import_dmabuf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma) - { -- struct vc_sm_buffer *res = dmabuf->priv; -+ struct vc_sm_buffer *buf = dmabuf->priv; - -- pr_debug("%s: mmap dma_buf %p, res %p, imported db %p\n", __func__, -- dmabuf, res, res->import_dma_buf); -- if (!res->import_dma_buf) { -+ pr_debug("%s: mmap dma_buf %p, buf %p, imported db %p\n", __func__, -+ dmabuf, buf, buf->import.dma_buf); -+ if (!buf->imported) { - pr_err("%s: mmap dma_buf %p- not an imported buffer\n", - __func__, dmabuf); - return -EINVAL; - } -- return res->import_dma_buf->ops->mmap(res->import_dma_buf, vma); -+ return buf->import.dma_buf->ops->mmap(buf->import.dma_buf, vma); - } - - static - void vc_sm_import_dma_buf_release(struct dma_buf *dmabuf) - { -- struct vc_sm_buffer *res = dmabuf->priv; -+ struct vc_sm_buffer *buf = dmabuf->priv; - - pr_debug("%s: Relasing dma_buf %p\n", __func__, dmabuf); -- if (!res->import_dma_buf) -+ mutex_lock(&buf->lock); -+ if (!buf->imported) - return; - -- res->in_use = 0; -+ buf->in_use = 0; - -- vc_sm_release_resource(res, 0); -+ vc_sm_vpu_free(buf); -+ -+ vc_sm_release_resource(buf); - } - - static - void *vc_sm_import_dma_buf_kmap(struct dma_buf *dmabuf, - unsigned long offset) - { -- struct vc_sm_buffer *res = dmabuf->priv; -+ struct vc_sm_buffer *buf = dmabuf->priv; - -- if (!res->import_dma_buf) -+ if (!buf->imported) - return NULL; -- return res->import_dma_buf->ops->map(res->import_dma_buf, -- offset); -+ return buf->import.dma_buf->ops->map(buf->import.dma_buf, offset); - } - - static - void vc_sm_import_dma_buf_kunmap(struct dma_buf *dmabuf, - unsigned long offset, void *ptr) - { -- struct vc_sm_buffer *res = dmabuf->priv; -+ struct vc_sm_buffer *buf = dmabuf->priv; - -- if (!res->import_dma_buf) -+ if (!buf->imported) - return; -- res->import_dma_buf->ops->unmap(res->import_dma_buf, -- offset, ptr); -+ buf->import.dma_buf->ops->unmap(buf->import.dma_buf, offset, ptr); - } - - static - int vc_sm_import_dma_buf_begin_cpu_access(struct dma_buf *dmabuf, - enum dma_data_direction direction) - { -- struct vc_sm_buffer *res = dmabuf->priv; -+ struct vc_sm_buffer *buf = dmabuf->priv; - -- if (!res->import_dma_buf) -+ if (!buf->imported) - return -EINVAL; -- return res->import_dma_buf->ops->begin_cpu_access(res->import_dma_buf, -- direction); -+ return buf->import.dma_buf->ops->begin_cpu_access(buf->import.dma_buf, -+ direction); - } - - static - int vc_sm_import_dma_buf_end_cpu_access(struct dma_buf *dmabuf, - enum dma_data_direction direction) - { -- struct vc_sm_buffer *res = dmabuf->priv; -+ struct vc_sm_buffer *buf = dmabuf->priv; - -- if (!res->import_dma_buf) -+ if (!buf->imported) - return -EINVAL; -- return res->import_dma_buf->ops->end_cpu_access(res->import_dma_buf, -+ return buf->import.dma_buf->ops->end_cpu_access(buf->import.dma_buf, - direction); - } - -@@ -516,9 +820,8 @@ vc_sm_cma_import_dmabuf_internal(struct - memcpy(import.name, VC_SM_RESOURCE_NAME_DEFAULT, - sizeof(VC_SM_RESOURCE_NAME_DEFAULT)); - -- pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %pad, size %u\n", -- __func__, import.name, import.type, &dma_addr, -- import.size); -+ pr_debug("[%s]: attempt to import \"%s\" data - type %u, addr %pad, size %u.\n", -+ __func__, import.name, import.type, &dma_addr, import.size); - - /* Allocate the videocore buffer. */ - status = vc_sm_cma_vchi_import(sm_state->sm_handle, &import, &result, -@@ -548,12 +851,14 @@ vc_sm_cma_import_dmabuf_internal(struct - buffer->size = import.size; - buffer->vpu_state = VPU_MAPPED; - -- buffer->import_dma_buf = dma_buf; -+ buffer->imported = 1; -+ buffer->import.dma_buf = dma_buf; - -- buffer->attach = attach; -- buffer->sgt = sgt; -+ buffer->import.attach = attach; -+ buffer->import.sgt = sgt; - buffer->dma_addr = dma_addr; - buffer->in_use = 1; -+ buffer->kernel_id = import.kernel_id; - - /* - * We're done - we need to export a new dmabuf chaining through most -@@ -594,6 +899,91 @@ error: - return ret; - } - -+static int vc_sm_cma_vpu_alloc(u32 size, uint32_t align, const char *name, -+ u32 mem_handle, struct vc_sm_buffer **ret_buffer) -+{ -+ DEFINE_DMA_BUF_EXPORT_INFO(exp_info); -+ struct vc_sm_buffer *buffer = NULL; -+ int aligned_size; -+ int ret = 0; -+ -+ /* Align to the user requested align */ -+ aligned_size = ALIGN(size, align); -+ /* and then to a page boundary */ -+ aligned_size = PAGE_ALIGN(aligned_size); -+ -+ if (!aligned_size) -+ return -EINVAL; -+ -+ /* Allocate local buffer to track this allocation. */ -+ buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); -+ if (!buffer) -+ return -ENOMEM; -+ -+ mutex_init(&buffer->lock); -+ -+ if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, -+ aligned_size)) { -+ pr_err("[%s]: cma alloc of %d bytes failed\n", -+ __func__, aligned_size); -+ ret = -ENOMEM; -+ goto error; -+ } -+ buffer->sg_table = buffer->alloc.sg_table; -+ -+ pr_debug("[%s]: cma alloc of %d bytes success\n", -+ __func__, aligned_size); -+ -+ if (dma_map_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, -+ buffer->sg_table->nents, DMA_BIDIRECTIONAL) <= 0) { -+ pr_err("[%s]: dma_map_sg failed\n", __func__); -+ goto error; -+ } -+ -+ INIT_LIST_HEAD(&buffer->attachments); -+ -+ memcpy(buffer->name, name, -+ min(sizeof(buffer->name), strlen(name))); -+ -+ exp_info.ops = &dma_buf_ops; -+ exp_info.size = aligned_size; -+ exp_info.flags = O_RDWR; -+ exp_info.priv = buffer; -+ -+ buffer->dma_buf = dma_buf_export(&exp_info); -+ if (IS_ERR(buffer->dma_buf)) { -+ ret = PTR_ERR(buffer->dma_buf); -+ goto error; -+ } -+ buffer->dma_addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); -+ if ((buffer->dma_addr & 0xC0000000) != 0xC0000000) { -+ pr_err("%s: Expecting an uncached alias for dma_addr %pad\n", -+ __func__, &buffer->dma_addr); -+ buffer->dma_addr |= 0xC0000000; -+ } -+ buffer->private = sm_state->vpu_allocs; -+ -+ buffer->vc_handle = mem_handle; -+ buffer->vpu_state = VPU_MAPPED; -+ buffer->vpu_allocated = 1; -+ buffer->size = size; -+ /* -+ * Create an ID that will be passed along with our message so -+ * that when we service the release reply, we can look up which -+ * resource is being released. -+ */ -+ buffer->kernel_id = get_kernel_id(buffer); -+ -+ vc_sm_add_resource(sm_state->vpu_allocs, buffer); -+ -+ *ret_buffer = buffer; -+ return 0; -+error: -+ if (buffer) -+ vc_sm_release_resource(buffer); -+ return ret; -+} -+ - static void - vc_sm_vpu_event(struct sm_instance *instance, struct vc_sm_result_t *reply, - int reply_len) -@@ -612,21 +1002,61 @@ vc_sm_vpu_event(struct sm_instance *inst - struct vc_sm_released *release = (struct vc_sm_released *)reply; - struct vc_sm_buffer *buffer = - lookup_kernel_id(release->kernel_id); -+ if (!buffer) { -+ pr_err("%s: VC released a buffer that is already released, kernel_id %d\n", -+ __func__, release->kernel_id); -+ break; -+ } -+ mutex_lock(&buffer->lock); - -- /* -- * FIXME: Need to check buffer is still valid and allocated -- * before continuing -- */ - pr_debug("%s: Released addr %08x, size %u, id %08x, mem_handle %08x\n", - __func__, release->addr, release->size, - release->kernel_id, release->vc_handle); -- mutex_lock(&buffer->lock); -+ - buffer->vc_handle = 0; - buffer->vpu_state = VPU_NOT_MAPPED; -- mutex_unlock(&buffer->lock); - free_kernel_id(release->kernel_id); - -- vc_sm_release_resource(buffer, 0); -+ if (buffer->vpu_allocated) { -+ /* VPU allocation, so release the dmabuf which will -+ * trigger the clean up. -+ */ -+ mutex_unlock(&buffer->lock); -+ dma_buf_put(buffer->dma_buf); -+ } else { -+ vc_sm_release_resource(buffer); -+ } -+ } -+ break; -+ case VC_SM_MSG_TYPE_VC_MEM_REQUEST: -+ { -+ struct vc_sm_buffer *buffer = NULL; -+ struct vc_sm_vc_mem_request *req = -+ (struct vc_sm_vc_mem_request *)reply; -+ struct vc_sm_vc_mem_request_result reply; -+ int ret; -+ -+ pr_debug("%s: Request %u bytes of memory, align %d name %s, trans_id %08x\n", -+ __func__, req->size, req->align, req->name, -+ req->trans_id); -+ ret = vc_sm_cma_vpu_alloc(req->size, req->align, req->name, -+ req->vc_handle, &buffer); -+ -+ reply.trans_id = req->trans_id; -+ if (!ret) { -+ reply.addr = buffer->dma_addr; -+ reply.kernel_id = buffer->kernel_id; -+ pr_debug("%s: Allocated resource buffer %p, addr %pad\n", -+ __func__, buffer, &buffer->dma_addr); -+ } else { -+ pr_err("%s: Allocation failed size %u, name %s, vc_handle %u\n", -+ __func__, req->size, req->name, req->vc_handle); -+ reply.addr = 0; -+ reply.kernel_id = 0; -+ } -+ vc_sm_vchi_client_vc_mem_req_reply(sm_state->sm_handle, &reply, -+ &sm_state->int_trans_id); -+ break; - } - break; - default: -@@ -645,6 +1075,14 @@ static void vc_sm_connected_init(void) - - pr_info("[%s]: start\n", __func__); - -+ if (vc_sm_cma_add_heaps(&sm_state->cma_heap) || -+ !sm_state->cma_heap) { -+ pr_err("[%s]: failed to initialise CMA heaps\n", -+ __func__); -+ ret = -EIO; -+ goto err_free_mem; -+ } -+ - /* - * Initialize and create a VCHI connection for the shared memory service - * running on videocore. -@@ -696,7 +1134,7 @@ static void vc_sm_connected_init(void) - goto err_remove_shared_memory; - } - -- version.version = 1; -+ version.version = 2; - ret = vc_sm_cma_vchi_client_version(sm_state->sm_handle, &version, - &version_result, - &sm_state->int_trans_id); -@@ -768,7 +1206,7 @@ static int bcm2835_vc_sm_cma_remove(stru - int vc_sm_cma_int_handle(void *handle) - { - struct dma_buf *dma_buf = (struct dma_buf *)handle; -- struct vc_sm_buffer *res; -+ struct vc_sm_buffer *buf; - - /* Validate we can work with this device. */ - if (!sm_state || !handle) { -@@ -776,8 +1214,8 @@ int vc_sm_cma_int_handle(void *handle) - return 0; - } - -- res = (struct vc_sm_buffer *)dma_buf->priv; -- return res->vc_handle; -+ buf = (struct vc_sm_buffer *)dma_buf->priv; -+ return buf->vc_handle; - } - EXPORT_SYMBOL_GPL(vc_sm_cma_int_handle); - -@@ -804,7 +1242,7 @@ EXPORT_SYMBOL_GPL(vc_sm_cma_free); - int vc_sm_cma_import_dmabuf(struct dma_buf *src_dmabuf, void **handle) - { - struct dma_buf *new_dma_buf; -- struct vc_sm_buffer *res; -+ struct vc_sm_buffer *buf; - int ret; - - /* Validate we can work with this device. */ -@@ -818,7 +1256,7 @@ int vc_sm_cma_import_dmabuf(struct dma_b - - if (!ret) { - pr_debug("%s: imported to ptr %p\n", __func__, new_dma_buf); -- res = (struct vc_sm_buffer *)new_dma_buf->priv; -+ buf = (struct vc_sm_buffer *)new_dma_buf->priv; - - /* Assign valid handle at this time.*/ - *handle = new_dma_buf; ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h -@@ -21,6 +21,8 @@ - #include - #include - -+#include "vc_sm_cma.h" -+ - #define VC_SM_MAX_NAME_LEN 32 - - enum vc_sm_vpu_mapping_state { -@@ -29,31 +31,51 @@ enum vc_sm_vpu_mapping_state { - VPU_UNMAPPING - }; - -+struct vc_sm_imported { -+ struct dma_buf *dma_buf; -+ struct dma_buf_attachment *attach; -+ struct sg_table *sgt; -+}; -+ - struct vc_sm_buffer { - struct list_head global_buffer_list; /* Global list of buffers. */ - -+ /* Index in the kernel_id idr so that we can find the -+ * mmal_msg_context again when servicing the VCHI reply. -+ */ -+ int kernel_id; -+ - size_t size; - - /* Lock over all the following state for this buffer */ - struct mutex lock; -- struct sg_table *sg_table; - struct list_head attachments; - - char name[VC_SM_MAX_NAME_LEN]; - - int in_use:1; /* Kernel is still using this resource */ -+ int imported:1; /* Imported dmabuf */ -+ -+ struct sg_table *sg_table; - - enum vc_sm_vpu_mapping_state vpu_state; - u32 vc_handle; /* VideoCore handle for this buffer */ -+ int vpu_allocated; /* -+ * The VPU made this allocation. Release the -+ * local dma_buf when the VPU releases the -+ * resource. -+ */ - - /* DMABUF related fields */ -- struct dma_buf *import_dma_buf; - struct dma_buf *dma_buf; -- struct dma_buf_attachment *attach; -- struct sg_table *sgt; - dma_addr_t dma_addr; - - struct vc_sm_privdata_t *private; -+ -+ union { -+ struct vc_sm_cma_alloc_data alloc; -+ struct vc_sm_imported import; -+ }; - }; - - #endif ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c -@@ -0,0 +1,99 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * VideoCore Shared Memory CMA allocator -+ * -+ * Copyright: 2018, Raspberry Pi (Trading) Ltd -+ * -+ * Based on the Android ION allocator -+ * Copyright (C) Linaro 2012 -+ * Author: for ST-Ericsson. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "vc_sm_cma.h" -+ -+/* CMA heap operations functions */ -+int vc_sm_cma_buffer_allocate(struct cma *cma_heap, -+ struct vc_sm_cma_alloc_data *buffer, -+ unsigned long len) -+{ -+ /* len should already be page aligned */ -+ unsigned long num_pages = len / PAGE_SIZE; -+ struct sg_table *table; -+ struct page *pages; -+ int ret; -+ -+ pages = cma_alloc(cma_heap, num_pages, 0, GFP_KERNEL); -+ if (!pages) -+ return -ENOMEM; -+ -+ table = kmalloc(sizeof(*table), GFP_KERNEL); -+ if (!table) -+ goto err; -+ -+ ret = sg_alloc_table(table, 1, GFP_KERNEL); -+ if (ret) -+ goto free_mem; -+ -+ sg_set_page(table->sgl, pages, len, 0); -+ -+ buffer->priv_virt = pages; -+ buffer->sg_table = table; -+ buffer->cma_heap = cma_heap; -+ buffer->num_pages = num_pages; -+ return 0; -+ -+free_mem: -+ kfree(table); -+err: -+ cma_release(cma_heap, pages, num_pages); -+ return -ENOMEM; -+} -+ -+void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer) -+{ -+ struct cma *cma_heap = buffer->cma_heap; -+ struct page *pages = buffer->priv_virt; -+ -+ /* release memory */ -+ if (cma_heap) -+ cma_release(cma_heap, pages, buffer->num_pages); -+ -+ /* release sg table */ -+ if (buffer->sg_table) { -+ sg_free_table(buffer->sg_table); -+ kfree(buffer->sg_table); -+ buffer->sg_table = NULL; -+ } -+} -+ -+int __vc_sm_cma_add_heaps(struct cma *cma, void *priv) -+{ -+ struct cma **heap = (struct cma **)priv; -+ const char *name = cma_get_name(cma); -+ -+ if (!(*heap)) { -+ phys_addr_t phys_addr = cma_get_base(cma); -+ -+ pr_debug("%s: Adding cma heap %s (start %pap, size %lu) for use by vcsm\n", -+ __func__, name, &phys_addr, cma_get_size(cma)); -+ *heap = cma; -+ } else { -+ pr_err("%s: Ignoring heap %s as already set\n", -+ __func__, name); -+ } -+ -+ return 0; -+} -+ -+int vc_sm_cma_add_heaps(struct cma **cma_heap) -+{ -+ cma_for_each_area(__vc_sm_cma_add_heaps, cma_heap); -+ return 0; -+} ---- /dev/null -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h -@@ -0,0 +1,39 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+ -+/* -+ * VideoCore Shared Memory CMA allocator -+ * -+ * Copyright: 2018, Raspberry Pi (Trading) Ltd -+ * -+ * Based on the Android ION allocator -+ * Copyright (C) Linaro 2012 -+ * Author: for ST-Ericsson. -+ * -+ * This software is licensed under the terms of the GNU General Public -+ * License version 2, as published by the Free Software Foundation, and -+ * may be copied, distributed, and modified under those terms. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ */ -+#ifndef VC_SM_CMA_H -+#define VC_SM_CMA_H -+ -+struct vc_sm_cma_alloc_data { -+ struct cma *cma_heap; -+ unsigned long num_pages; -+ void *priv_virt; -+ struct sg_table *sg_table; -+}; -+ -+int vc_sm_cma_buffer_allocate(struct cma *cma_heap, -+ struct vc_sm_cma_alloc_data *buffer, -+ unsigned long len); -+void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer); -+ -+int vc_sm_cma_add_heaps(struct cma **cma_heap); -+ -+#endif ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c -@@ -500,3 +500,13 @@ int vc_sm_cma_vchi_client_version(struct - msg, sizeof(*msg), NULL, 0, - cur_trans_id, 0); - } -+ -+int vc_sm_vchi_client_vc_mem_req_reply(struct sm_instance *handle, -+ struct vc_sm_vc_mem_request_result *msg, -+ uint32_t *cur_trans_id) -+{ -+ return vc_sm_cma_vchi_send_msg(handle, -+ VC_SM_MSG_TYPE_VC_MEM_REQUEST_REPLY, -+ msg, sizeof(*msg), 0, 0, cur_trans_id, -+ 0); -+} ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.h -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.h -@@ -56,4 +56,8 @@ int vc_sm_cma_vchi_client_version(struct - struct vc_sm_result_t *result, - u32 *cur_trans_id); - -+int vc_sm_vchi_client_vc_mem_req_reply(struct sm_instance *handle, -+ struct vc_sm_vc_mem_request_result *msg, -+ uint32_t *cur_trans_id); -+ - #endif /* __VC_SM_CMA_VCHI_H__INCLUDED__ */ ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_defs.h -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_defs.h -@@ -264,6 +264,8 @@ struct vc_sm_vc_mem_request { - u32 align; - /* resource name (for easier tracking) */ - char name[VC_SM_RESOURCE_NAME]; -+ /* VPU handle for the resource */ -+ u32 vc_handle; - }; - - /* Response from the kernel to provide the VPU with some memory */ diff --git a/target/linux/brcm2708/patches-4.19/950-0624-arm-dts-Add-coherent_pool-1M-to-Pi-4-bootargs.patch b/target/linux/brcm2708/patches-4.19/950-0624-arm-dts-Add-coherent_pool-1M-to-Pi-4-bootargs.patch new file mode 100644 index 0000000000..222de5bafb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0624-arm-dts-Add-coherent_pool-1M-to-Pi-4-bootargs.patch @@ -0,0 +1,28 @@ +From f9dfd577dcc8e3173ddce79bca535eeee0fad1a4 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 2 Jul 2019 17:13:05 +0100 +Subject: [PATCH] arm: dts: Add coherent_pool=1M to Pi 4 bootargs + +Downstream Raspberry Pi dts files add "coherent_pool=1M" to the kernel +command line to aid the dwc_otg driver, but this excluded Pi 4 which +uses a new XCHI interface instead. UAS also benefits from a larger +coherent_pool value, so replicate the addition in bcm2711-rpi-4-b.dts. + +See: https://github.com/raspberrypi/linux/pull/3040 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -14,7 +14,7 @@ + }; + + chosen { +- bootargs = "8250.nr_uarts=1 cma=64M"; ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 cma=64M"; + }; + + aliases { diff --git a/target/linux/brcm2708/patches-4.19/950-0624-staging-vc-sm-cma-Update-TODO.patch b/target/linux/brcm2708/patches-4.19/950-0624-staging-vc-sm-cma-Update-TODO.patch deleted file mode 100644 index 658fda4887..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0624-staging-vc-sm-cma-Update-TODO.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 753e73267994a88505b6883cdf463d1d0bacf090 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 11 Mar 2019 16:38:32 +0000 -Subject: [PATCH 624/806] staging: vc-sm-cma: Update TODO. - -The driver is already a platform driver, so that can be -deleted from the TODO. -There are no known issues that need to be resolved. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/TODO | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/TODO -+++ b/drivers/staging/vc04_services/vc-sm-cma/TODO -@@ -1,2 +1 @@ --1) Convert to a platform driver. -- -+No currently outstanding tasks except some clean-up. diff --git a/target/linux/brcm2708/patches-4.19/950-0625-overlays-Correct-gpio-fan-gpio-flags-for-4.19.patch b/target/linux/brcm2708/patches-4.19/950-0625-overlays-Correct-gpio-fan-gpio-flags-for-4.19.patch new file mode 100644 index 0000000000..765874ef29 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0625-overlays-Correct-gpio-fan-gpio-flags-for-4.19.patch @@ -0,0 +1,30 @@ +From 21e4c9306bd20ab4e02f90cd452d90bc4e4a0a98 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 3 Jul 2019 20:37:14 +0100 +Subject: [PATCH] overlays: Correct gpio-fan gpio flags for 4.19 + +The gpio-fan overlay was submitted for the 4.14 kernel where the second +value in the Device Tree gpios declaration was ignored (thanks to an +old-style driver), allowing the fan-control output to be active-high +even though the declaration appears to request it be active-low. +The gpio-fan driver in 4.19 uses GPIO descriptors and honours the +active-low flag that the overlay (accidentally?) supplies. + +Change/correct the flags field to mark the GPIO as active-high. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/gpio-fan-overlay.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts +@@ -45,7 +45,7 @@ + __overlay__ { + fan0: gpio-fan@0 { + compatible = "gpio-fan"; +- gpios = <&gpio 12 1>; ++ gpios = <&gpio 12 0>; + gpio-fan,speed-map = <0 0>, + <5000 1>; + #cooling-cells = <2>; diff --git a/target/linux/brcm2708/patches-4.19/950-0625-staging-vc-sm-cma-Add-in-userspace-allocation-API.patch b/target/linux/brcm2708/patches-4.19/950-0625-staging-vc-sm-cma-Add-in-userspace-allocation-API.patch deleted file mode 100644 index 4ab944eec9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0625-staging-vc-sm-cma-Add-in-userspace-allocation-API.patch +++ /dev/null @@ -1,675 +0,0 @@ -From 549c0266e570da686f19e4435d76411cd7137954 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 11 Mar 2019 16:35:23 +0000 -Subject: [PATCH 625/806] staging: vc-sm-cma: Add in userspace allocation API - -Replacing the functionality from the older vc-sm driver, -add in a userspace API that allows allocation of buffers, -and importing of dma-bufs. -The driver hands out dma-buf fds, therefore much of the -handling around lifespan and odd mmaps from the old driver -goes away. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/vc-sm-cma/vc_sm.c | 371 ++++++++++++++++-- - .../vc04_services/vc-sm-cma/vc_sm_cma.c | 3 +- - .../vc04_services/vc-sm-cma/vc_sm_cma.h | 2 +- - include/linux/broadcom/vc_sm_cma_ioctl.h | 87 ++++ - 4 files changed, 435 insertions(+), 28 deletions(-) - create mode 100644 include/linux/broadcom/vc_sm_cma_ioctl.h - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -36,6 +36,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -52,6 +53,7 @@ - #include "vc_sm.h" - #include "vc_sm_cma.h" - #include "vc_sm_knl.h" -+#include - - /* ---- Private Constants and Types --------------------------------------- */ - -@@ -83,6 +85,8 @@ struct sm_pde_t { - struct sm_state_t { - struct platform_device *pdev; - -+ struct miscdevice misc_dev; -+ - struct sm_instance *sm_handle; /* Handle for videocore service. */ - struct cma *cma_heap; - -@@ -346,7 +350,6 @@ static void vc_sm_release_resource(struc - - defer: - mutex_unlock(&buffer->lock); -- return; - } - - /* Create support for private data tracking. */ -@@ -381,7 +384,7 @@ static struct sg_table *dup_sg_table(str - ret = sg_alloc_table(new_table, table->nents, GFP_KERNEL); - if (ret) { - kfree(new_table); -- return ERR_PTR(-ENOMEM); -+ return ERR_PTR(ret); - } - - new_sg = new_table->sgl; -@@ -417,7 +420,7 @@ static int vc_sm_dma_buf_attach(struct d - table = dup_sg_table(buf->sg_table); - if (IS_ERR(table)) { - kfree(a); -- return -ENOMEM; -+ return PTR_ERR(table); - } - - a->table = table; -@@ -433,8 +436,8 @@ static int vc_sm_dma_buf_attach(struct d - return 0; - } - --static void vc_sm_dma_buf_detatch(struct dma_buf *dmabuf, -- struct dma_buf_attachment *attachment) -+static void vc_sm_dma_buf_detach(struct dma_buf *dmabuf, -+ struct dma_buf_attachment *attachment) - { - struct vc_sm_dma_buf_attachment *a = attachment->priv; - struct vc_sm_buffer *buf = dmabuf->priv; -@@ -544,6 +547,9 @@ static void vc_sm_dma_buf_release(struct - vc_sm_clean_up_dmabuf(buffer); - pr_debug("%s clean_up dmabuf done\n", __func__); - -+ /* buffer->lock will be destroyed by vc_sm_release_resource if finished -+ * with, otherwise unlocked. Do NOT unlock here. -+ */ - vc_sm_release_resource(buffer); - pr_debug("%s done\n", __func__); - } -@@ -613,7 +619,7 @@ static const struct dma_buf_ops dma_buf_ - .mmap = vc_sm_dmabuf_mmap, - .release = vc_sm_dma_buf_release, - .attach = vc_sm_dma_buf_attach, -- .detach = vc_sm_dma_buf_detatch, -+ .detach = vc_sm_dma_buf_detach, - .begin_cpu_access = vc_sm_dma_buf_begin_cpu_access, - .end_cpu_access = vc_sm_dma_buf_end_cpu_access, - .map = vc_sm_dma_buf_kmap, -@@ -762,6 +768,7 @@ static const struct dma_buf_ops dma_buf_ - int - vc_sm_cma_import_dmabuf_internal(struct vc_sm_privdata_t *private, - struct dma_buf *dma_buf, -+ int fd, - struct dma_buf **imported_buf) - { - DEFINE_DMA_BUF_EXPORT_INFO(exp_info); -@@ -775,10 +782,15 @@ vc_sm_cma_import_dmabuf_internal(struct - int status; - - /* Setup our allocation parameters */ -- pr_debug("%s: importing dma_buf %p\n", __func__, dma_buf); -+ pr_debug("%s: importing dma_buf %p/fd %d\n", __func__, dma_buf, fd); - -- get_dma_buf(dma_buf); -- dma_buf = dma_buf; -+ if (fd < 0) -+ get_dma_buf(dma_buf); -+ else -+ dma_buf = dma_buf_get(fd); -+ -+ if (!dma_buf) -+ return -EINVAL; - - attach = dma_buf_attach(dma_buf, &sm_state->pdev->dev); - if (IS_ERR(attach)) { -@@ -921,6 +933,10 @@ static int vc_sm_cma_vpu_alloc(u32 size, - return -ENOMEM; - - mutex_init(&buffer->lock); -+ /* Acquire the mutex as vc_sm_release_resource will release it in the -+ * error path. -+ */ -+ mutex_lock(&buffer->lock); - - if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, - aligned_size)) { -@@ -976,6 +992,8 @@ static int vc_sm_cma_vpu_alloc(u32 size, - - vc_sm_add_resource(sm_state->vpu_allocs, buffer); - -+ mutex_unlock(&buffer->lock); -+ - *ret_buffer = buffer; - return 0; - error: -@@ -1065,6 +1083,297 @@ vc_sm_vpu_event(struct sm_instance *inst - } - } - -+/* Userspace handling */ -+/* -+ * Open the device. Creates a private state to help track all allocation -+ * associated with this device. -+ */ -+static int vc_sm_cma_open(struct inode *inode, struct file *file) -+{ -+ /* Make sure the device was started properly. */ -+ if (!sm_state) { -+ pr_err("[%s]: invalid device\n", __func__); -+ return -EPERM; -+ } -+ -+ file->private_data = vc_sm_cma_create_priv_data(current->tgid); -+ if (!file->private_data) { -+ pr_err("[%s]: failed to create data tracker\n", __func__); -+ -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+/* -+ * Close the vcsm-cma device. -+ * All allocations are file descriptors to the dmabuf objects, so we will get -+ * the clean up request on those as those are cleaned up. -+ */ -+static int vc_sm_cma_release(struct inode *inode, struct file *file) -+{ -+ struct vc_sm_privdata_t *file_data = -+ (struct vc_sm_privdata_t *)file->private_data; -+ int ret = 0; -+ -+ /* Make sure the device was started properly. */ -+ if (!sm_state || !file_data) { -+ pr_err("[%s]: invalid device\n", __func__); -+ ret = -EPERM; -+ goto out; -+ } -+ -+ pr_debug("[%s]: using private data %p\n", __func__, file_data); -+ -+ /* Terminate the private data. */ -+ kfree(file_data); -+ -+out: -+ return ret; -+} -+ -+/* -+ * Allocate a shared memory handle and block. -+ * Allocation is from CMA, and then imported into the VPU mappings. -+ */ -+int vc_sm_cma_ioctl_alloc(struct vc_sm_privdata_t *private, -+ struct vc_sm_cma_ioctl_alloc *ioparam) -+{ -+ DEFINE_DMA_BUF_EXPORT_INFO(exp_info); -+ struct vc_sm_buffer *buffer = NULL; -+ struct vc_sm_import import = { 0 }; -+ struct vc_sm_import_result result = { 0 }; -+ struct dma_buf *dmabuf = NULL; -+ int aligned_size; -+ int ret = 0; -+ int status; -+ int fd = -1; -+ -+ aligned_size = PAGE_ALIGN(ioparam->size); -+ -+ if (!aligned_size) -+ return -EINVAL; -+ -+ /* Allocate local buffer to track this allocation. */ -+ buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); -+ if (!buffer) { -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, -+ aligned_size)) { -+ pr_err("[%s]: cma alloc of %d bytes failed\n", -+ __func__, aligned_size); -+ kfree(buffer); -+ return -ENOMEM; -+ } -+ buffer->sg_table = buffer->alloc.sg_table; -+ -+ if (dma_map_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, -+ buffer->sg_table->nents, DMA_BIDIRECTIONAL) <= 0) { -+ pr_err("[%s]: dma_map_sg failed\n", __func__); -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ import.type = VC_SM_ALLOC_NON_CACHED; -+ import.allocator = current->tgid; -+ -+ if (*ioparam->name) -+ memcpy(import.name, ioparam->name, sizeof(import.name) - 1); -+ else -+ memcpy(import.name, VC_SM_RESOURCE_NAME_DEFAULT, -+ sizeof(VC_SM_RESOURCE_NAME_DEFAULT)); -+ -+ mutex_init(&buffer->lock); -+ INIT_LIST_HEAD(&buffer->attachments); -+ memcpy(buffer->name, import.name, -+ min(sizeof(buffer->name), sizeof(import.name) - 1)); -+ -+ exp_info.ops = &dma_buf_ops; -+ exp_info.size = aligned_size; -+ exp_info.flags = O_RDWR; -+ exp_info.priv = buffer; -+ -+ dmabuf = dma_buf_export(&exp_info); -+ if (IS_ERR(dmabuf)) { -+ ret = PTR_ERR(dmabuf); -+ goto error; -+ } -+ buffer->dma_buf = dmabuf; -+ -+ import.addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); -+ import.size = aligned_size; -+ import.kernel_id = (uint32_t)buffer; -+ -+ /* Wrap it into a videocore buffer. */ -+ status = vc_sm_cma_vchi_import(sm_state->sm_handle, &import, &result, -+ &sm_state->int_trans_id); -+ if (status == -EINTR) { -+ pr_debug("[%s]: requesting import memory action restart (trans_id: %u)\n", -+ __func__, sm_state->int_trans_id); -+ ret = -ERESTARTSYS; -+ private->restart_sys = -EINTR; -+ private->int_action = VC_SM_MSG_TYPE_IMPORT; -+ goto error; -+ } else if (status || !result.res_handle) { -+ pr_err("[%s]: failed to import memory on videocore (status: %u, trans_id: %u)\n", -+ __func__, status, sm_state->int_trans_id); -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ /* Keep track of the buffer we created. */ -+ buffer->private = private; -+ buffer->vc_handle = result.res_handle; -+ buffer->size = import.size; -+ buffer->dma_addr = import.addr; -+ buffer->vpu_state = VPU_MAPPED; -+ //buffer->res_cached = ioparam->cached; -+ -+ fd = dma_buf_fd(dmabuf, O_CLOEXEC); -+ if (fd < 0) -+ goto error; -+ -+ vc_sm_add_resource(private, buffer); -+ -+ pr_debug("[%s]: Added resource as fd %d, buffer %p, private %p, dma_addr %pad\n", -+ __func__, fd, buffer, private, &buffer->dma_addr); -+ -+ /* We're done */ -+ ioparam->handle = fd; -+ ioparam->vc_handle = buffer->vc_handle; -+ ioparam->dma_addr = buffer->dma_addr; -+ return 0; -+ -+error: -+ if (buffer) { -+ pr_err("[%s]: something failed - cleanup. ret %d\n", __func__, -+ ret); -+ -+ dma_buf_put(dmabuf); -+ } -+ return ret; -+} -+ -+static long vc_sm_cma_ioctl(struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ int ret = 0; -+ unsigned int cmdnr = _IOC_NR(cmd); -+ struct vc_sm_privdata_t *file_data = -+ (struct vc_sm_privdata_t *)file->private_data; -+ -+ /* Validate we can work with this device. */ -+ if (!sm_state || !file_data) { -+ pr_err("[%s]: invalid device\n", __func__); -+ return -EPERM; -+ } -+ -+ pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, -+ current->tgid, file_data->pid); -+ -+ /* Action is a re-post of a previously interrupted action? */ -+ if (file_data->restart_sys == -EINTR) { -+ struct vc_sm_action_clean_t action_clean; -+ -+ pr_debug("[%s]: clean up of action %u (trans_id: %u) following EINTR\n", -+ __func__, file_data->int_action, -+ file_data->int_trans_id); -+ -+ action_clean.res_action = file_data->int_action; -+ action_clean.action_trans_id = file_data->int_trans_id; -+ -+ file_data->restart_sys = 0; -+ } -+ -+ /* Now process the command. */ -+ switch (cmdnr) { -+ /* New memory allocation. -+ */ -+ case VC_SM_CMA_CMD_ALLOC: -+ { -+ struct vc_sm_cma_ioctl_alloc ioparam; -+ -+ /* Get the parameter data. */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ break; -+ } -+ -+ ret = vc_sm_cma_ioctl_alloc(file_data, &ioparam); -+ if (!ret && -+ (copy_to_user((void *)arg, &ioparam, -+ sizeof(ioparam)) != 0)) { -+ /* FIXME: Release allocation */ -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ } -+ break; -+ } -+ -+ case VC_SM_CMA_CMD_IMPORT_DMABUF: -+ { -+ struct vc_sm_cma_ioctl_import_dmabuf ioparam; -+ struct dma_buf *new_dmabuf; -+ -+ /* Get the parameter data. */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ break; -+ } -+ -+ ret = vc_sm_cma_import_dmabuf_internal(file_data, -+ NULL, -+ ioparam.dmabuf_fd, -+ &new_dmabuf); -+ -+ if (!ret) { -+ struct vc_sm_buffer *buf = new_dmabuf->priv; -+ -+ ioparam.size = buf->size; -+ ioparam.handle = dma_buf_fd(new_dmabuf, -+ O_CLOEXEC); -+ ioparam.vc_handle = buf->vc_handle; -+ ioparam.dma_addr = buf->dma_addr; -+ -+ if (ioparam.handle < 0 || -+ (copy_to_user((void *)arg, &ioparam, -+ sizeof(ioparam)) != 0)) { -+ dma_buf_put(new_dmabuf); -+ /* FIXME: Release allocation */ -+ ret = -EFAULT; -+ } -+ } -+ break; -+ } -+ -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ -+ return ret; -+} -+ -+/* Device operations that we managed in this driver. */ -+static const struct file_operations vc_sm_ops = { -+ .owner = THIS_MODULE, -+ .unlocked_ioctl = vc_sm_cma_ioctl, -+ .open = vc_sm_cma_open, -+ .release = vc_sm_cma_release, -+}; -+ -+/* Driver load/unload functions */ - /* Videocore connected. */ - static void vc_sm_connected_init(void) - { -@@ -1075,12 +1384,11 @@ static void vc_sm_connected_init(void) - - pr_info("[%s]: start\n", __func__); - -- if (vc_sm_cma_add_heaps(&sm_state->cma_heap) || -- !sm_state->cma_heap) { -- pr_err("[%s]: failed to initialise CMA heaps\n", -+ vc_sm_cma_add_heaps(&sm_state->cma_heap); -+ if (!sm_state->cma_heap) { -+ pr_err("[%s]: failed to initialise CMA heap\n", - __func__); -- ret = -EIO; -- goto err_free_mem; -+ return; - } - - /* -@@ -1092,8 +1400,7 @@ static void vc_sm_connected_init(void) - pr_err("[%s]: failed to initialise VCHI instance (ret=%d)\n", - __func__, ret); - -- ret = -EIO; -- goto err_failed; -+ return; - } - - ret = vchi_connect(NULL, 0, vchi_instance); -@@ -1101,8 +1408,7 @@ static void vc_sm_connected_init(void) - pr_err("[%s]: failed to connect VCHI instance (ret=%d)\n", - __func__, ret); - -- ret = -EIO; -- goto err_failed; -+ return; - } - - /* Initialize an instance of the shared memory service. */ -@@ -1112,8 +1418,7 @@ static void vc_sm_connected_init(void) - pr_err("[%s]: failed to initialize shared memory service\n", - __func__); - -- ret = -EPERM; -- goto err_failed; -+ return; - } - - /* Create a debug fs directory entry (root). */ -@@ -1127,11 +1432,22 @@ static void vc_sm_connected_init(void) - - INIT_LIST_HEAD(&sm_state->buffer_list); - -+ /* Create a shared memory device. */ -+ sm_state->misc_dev.minor = MISC_DYNAMIC_MINOR; -+ sm_state->misc_dev.name = DEVICE_NAME; -+ sm_state->misc_dev.fops = &vc_sm_ops; -+ sm_state->misc_dev.parent = NULL; -+ ret = misc_register(&sm_state->misc_dev); -+ if (ret) { -+ pr_err("vcsm-cma: failed to register misc device.\n"); -+ goto err_remove_debugfs; -+ } -+ - sm_state->data_knl = vc_sm_cma_create_priv_data(0); - if (!sm_state->data_knl) { - pr_err("[%s]: failed to create kernel private data tracker\n", - __func__); -- goto err_remove_shared_memory; -+ goto err_remove_misc_dev; - } - - version.version = 2; -@@ -1148,11 +1464,13 @@ static void vc_sm_connected_init(void) - pr_info("[%s]: installed successfully\n", __func__); - return; - --err_remove_shared_memory: -+err_remove_misc_dev: -+ misc_deregister(&sm_state->misc_dev); -+err_remove_debugfs: - debugfs_remove_recursive(sm_state->dir_root); - vc_sm_cma_vchi_stop(&sm_state->sm_handle); --err_failed: -- pr_info("[%s]: failed, ret %d\n", __func__, ret); -+ -+ return; - } - - /* Driver loading. */ -@@ -1184,6 +1502,8 @@ static int bcm2835_vc_sm_cma_remove(stru - { - pr_debug("[%s]: start\n", __func__); - if (sm_inited) { -+ misc_deregister(&sm_state->misc_dev); -+ - /* Remove all proc entries. */ - debugfs_remove_recursive(sm_state->dir_root); - -@@ -1202,6 +1522,7 @@ static int bcm2835_vc_sm_cma_remove(stru - return 0; - } - -+/* Kernel API calls */ - /* Get an internal resource handle mapped from the external one. */ - int vc_sm_cma_int_handle(void *handle) - { -@@ -1252,7 +1573,7 @@ int vc_sm_cma_import_dmabuf(struct dma_b - } - - ret = vc_sm_cma_import_dmabuf_internal(sm_state->data_knl, src_dmabuf, -- &new_dma_buf); -+ -1, &new_dma_buf); - - if (!ret) { - pr_debug("%s: imported to ptr %p\n", __func__, new_dma_buf); ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c -@@ -92,8 +92,7 @@ int __vc_sm_cma_add_heaps(struct cma *cm - return 0; - } - --int vc_sm_cma_add_heaps(struct cma **cma_heap) -+void vc_sm_cma_add_heaps(struct cma **cma_heap) - { - cma_for_each_area(__vc_sm_cma_add_heaps, cma_heap); -- return 0; - } ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h -@@ -34,6 +34,6 @@ int vc_sm_cma_buffer_allocate(struct cma - unsigned long len); - void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer); - --int vc_sm_cma_add_heaps(struct cma **cma_heap); -+void vc_sm_cma_add_heaps(struct cma **cma_heap); - - #endif ---- /dev/null -+++ b/include/linux/broadcom/vc_sm_cma_ioctl.h -@@ -0,0 +1,87 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+ -+/* -+ * Copyright 2019 Raspberry Pi (Trading) Ltd. All rights reserved. -+ * -+ * Based on vmcs_sm_ioctl.h Copyright Broadcom Corporation. -+ */ -+ -+#ifndef __VC_SM_CMA_IOCTL_H -+#define __VC_SM_CMA_IOCTL_H -+ -+/* ---- Include Files ---------------------------------------------------- */ -+ -+#if defined(__KERNEL__) -+#include /* Needed for standard types */ -+#else -+#include -+#endif -+ -+#include -+ -+/* ---- Constants and Types ---------------------------------------------- */ -+ -+#define VC_SM_CMA_RESOURCE_NAME 32 -+#define VC_SM_CMA_RESOURCE_NAME_DEFAULT "sm-host-resource" -+ -+/* Type define used to create unique IOCTL number */ -+#define VC_SM_CMA_MAGIC_TYPE 'J' -+ -+/* IOCTL commands on /dev/vc-sm-cma */ -+enum vc_sm_cma_cmd_e { -+ VC_SM_CMA_CMD_ALLOC = 0x5A, /* Start at 0x5A arbitrarily */ -+ -+ VC_SM_CMA_CMD_IMPORT_DMABUF, -+ -+ VC_SM_CMA_CMD_LAST /* Do not delete */ -+}; -+ -+/* Cache type supported, conveniently matches the user space definition in -+ * user-vcsm.h. -+ */ -+enum vc_sm_cma_cache_e { -+ VC_SM_CMA_CACHE_NONE, -+ VC_SM_CMA_CACHE_HOST, -+ VC_SM_CMA_CACHE_VC, -+ VC_SM_CMA_CACHE_BOTH, -+}; -+ -+/* IOCTL Data structures */ -+struct vc_sm_cma_ioctl_alloc { -+ /* user -> kernel */ -+ __u32 size; -+ __u32 num; -+ __u32 cached; /* enum vc_sm_cma_cache_e */ -+ __u32 pad; -+ __u8 name[VC_SM_CMA_RESOURCE_NAME]; -+ -+ /* kernel -> user */ -+ __s32 handle; -+ __u32 vc_handle; -+ __u64 dma_addr; -+}; -+ -+struct vc_sm_cma_ioctl_import_dmabuf { -+ /* user -> kernel */ -+ __s32 dmabuf_fd; -+ __u32 cached; /* enum vc_sm_cma_cache_e */ -+ __u8 name[VC_SM_CMA_RESOURCE_NAME]; -+ -+ /* kernel -> user */ -+ __s32 handle; -+ __u32 vc_handle; -+ __u32 size; -+ __u32 pad; -+ __u64 dma_addr; -+}; -+ -+/* IOCTL numbers */ -+#define VC_SM_CMA_IOCTL_MEM_ALLOC\ -+ _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_ALLOC,\ -+ struct vc_sm_cma_ioctl_alloc) -+ -+#define VC_SM_CMA_IOCTL_MEM_IMPORT_DMABUF\ -+ _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_IMPORT_DMABUF,\ -+ struct vc_sm_cma_ioctl_import_dmabuf) -+ -+#endif /* __VC_SM_CMA_IOCTL_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0626-staging-vcsm-cma-Add-cache-control-ioctls.patch b/target/linux/brcm2708/patches-4.19/950-0626-staging-vcsm-cma-Add-cache-control-ioctls.patch deleted file mode 100644 index 35d1e49e5e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0626-staging-vcsm-cma-Add-cache-control-ioctls.patch +++ /dev/null @@ -1,245 +0,0 @@ -From b17f6dc1d79ae057294ac2d8d824aa2258ab09a8 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 20 Mar 2019 10:40:00 +0000 -Subject: [PATCH 626/806] staging: vcsm-cma: Add cache control ioctls - -The old driver allowed for direct cache manipulation and that -was used by various clients. Replicate here. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/vc-sm-cma/vc_sm.c | 141 +++++++++++++++++- - include/linux/broadcom/vc_sm_cma_ioctl.h | 27 ++++ - 2 files changed, 165 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -46,6 +46,7 @@ - #include - #include - #include -+#include - - #include "vchiq_connected.h" - #include "vc_sm_cma_vchi.h" -@@ -1258,6 +1259,99 @@ error: - return ret; - } - -+/* Converts VCSM_CACHE_OP_* to an operating function. */ -+static void (*cache_op_to_func(const unsigned int cache_op)) -+ (const void*, const void*) -+{ -+ switch (cache_op) { -+ case VC_SM_CACHE_OP_NOP: -+ return NULL; -+ -+ case VC_SM_CACHE_OP_INV: -+ return dmac_inv_range; -+ -+ case VC_SM_CACHE_OP_CLEAN: -+ return dmac_clean_range; -+ -+ case VC_SM_CACHE_OP_FLUSH: -+ return dmac_flush_range; -+ -+ default: -+ pr_err("[%s]: Invalid cache_op: 0x%08x\n", __func__, cache_op); -+ return NULL; -+ } -+} -+ -+/* -+ * Clean/invalid/flush cache of which buffer is already pinned (i.e. accessed). -+ */ -+static int clean_invalid_contig_2d(const void __user *addr, -+ const size_t block_count, -+ const size_t block_size, -+ const size_t stride, -+ const unsigned int cache_op) -+{ -+ size_t i; -+ void (*op_fn)(const void *start, const void *end); -+ -+ if (!block_size) { -+ pr_err("[%s]: size cannot be 0\n", __func__); -+ return -EINVAL; -+ } -+ -+ op_fn = cache_op_to_func(cache_op); -+ if (!op_fn) -+ return -EINVAL; -+ -+ for (i = 0; i < block_count; i ++, addr += stride) -+ op_fn(addr, addr + block_size); -+ -+ return 0; -+} -+ -+static int vc_sm_cma_clean_invalid2(unsigned int cmdnr, unsigned long arg) -+{ -+ struct vc_sm_cma_ioctl_clean_invalid2 ioparam; -+ struct vc_sm_cma_ioctl_clean_invalid_block *block = NULL; -+ int i, ret = 0; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, (void *)arg, sizeof(ioparam))) { -+ pr_err("[%s]: failed to copy-from-user header for cmd %x\n", -+ __func__, cmdnr); -+ return -EFAULT; -+ } -+ block = kmalloc(ioparam.op_count * sizeof(*block), GFP_KERNEL); -+ if (!block) -+ return -EFAULT; -+ -+ if (copy_from_user(block, (void *)(arg + sizeof(ioparam)), -+ ioparam.op_count * sizeof(*block)) != 0) { -+ pr_err("[%s]: failed to copy-from-user payload for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ for (i = 0; i < ioparam.op_count; i++) { -+ const struct vc_sm_cma_ioctl_clean_invalid_block * const op = block + i; -+ -+ if (op->invalidate_mode == VC_SM_CACHE_OP_NOP) -+ continue; -+ -+ ret = clean_invalid_contig_2d((void __user *)op->start_address, -+ op->block_count, op->block_size, -+ op->inter_block_stride, -+ op->invalidate_mode); -+ if (ret) -+ break; -+ } -+out: -+ kfree(block); -+ -+ return ret; -+} -+ - static long vc_sm_cma_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) - { -@@ -1272,9 +1366,6 @@ static long vc_sm_cma_ioctl(struct file - return -EPERM; - } - -- pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, -- current->tgid, file_data->pid); -- - /* Action is a re-post of a previously interrupted action? */ - if (file_data->restart_sys == -EINTR) { - struct vc_sm_action_clean_t action_clean; -@@ -1357,7 +1448,18 @@ static long vc_sm_cma_ioctl(struct file - break; - } - -+ /* -+ * Flush/Invalidate the cache for a given mapping. -+ * Blocks must be pinned (i.e. accessed) before this call. -+ */ -+ case VC_SM_CMA_CMD_CLEAN_INVALID2: -+ ret = vc_sm_cma_clean_invalid2(cmdnr, arg); -+ break; -+ - default: -+ pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, -+ current->tgid, file_data->pid); -+ - ret = -EINVAL; - break; - } -@@ -1365,10 +1467,43 @@ static long vc_sm_cma_ioctl(struct file - return ret; - } - -+#ifdef CONFIG_COMPAT -+struct vc_sm_cma_ioctl_clean_invalid2_32 { -+ u32 op_count; -+ struct vc_sm_cma_ioctl_clean_invalid_block { -+ u16 invalidate_mode; -+ u16 block_count; -+ compat_uptr_t start_address; -+ u32 block_size; -+ u32 inter_block_stride; -+ } s[0]; -+}; -+ -+#define VC_SM_CMA_CMD_CLEAN_INVALID2_32\ -+ _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_CLEAN_INVALID2,\ -+ struct vc_sm_cma_ioctl_clean_invalid2) -+ -+static long vc_sm_cma_compat_ioctl(struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ switch (cmd) { -+ case VC_SM_CMA_CMD_CLEAN_INVALID2_32: -+ /* FIXME */ -+ break; -+ -+ default: -+ return vc_sm_cma_compat_ioctl(file, cmd, arg); -+ } -+} -+#endif -+ - /* Device operations that we managed in this driver. */ - static const struct file_operations vc_sm_ops = { - .owner = THIS_MODULE, - .unlocked_ioctl = vc_sm_cma_ioctl, -+#ifdef CONFIG_COMPAT -+ .compat_ioctl = vc_sm_cma_compat_ioctl, -+#endif - .open = vc_sm_cma_open, - .release = vc_sm_cma_release, - }; ---- a/include/linux/broadcom/vc_sm_cma_ioctl.h -+++ b/include/linux/broadcom/vc_sm_cma_ioctl.h -@@ -33,6 +33,8 @@ enum vc_sm_cma_cmd_e { - - VC_SM_CMA_CMD_IMPORT_DMABUF, - -+ VC_SM_CMA_CMD_CLEAN_INVALID2, -+ - VC_SM_CMA_CMD_LAST /* Do not delete */ - }; - -@@ -75,6 +77,27 @@ struct vc_sm_cma_ioctl_import_dmabuf { - __u64 dma_addr; - }; - -+/* -+ * Cache functions to be set to struct vc_sm_cma_ioctl_clean_invalid2 -+ * invalidate_mode. -+ */ -+#define VC_SM_CACHE_OP_NOP 0x00 -+#define VC_SM_CACHE_OP_INV 0x01 -+#define VC_SM_CACHE_OP_CLEAN 0x02 -+#define VC_SM_CACHE_OP_FLUSH 0x03 -+ -+struct vc_sm_cma_ioctl_clean_invalid2 { -+ __u32 op_count; -+ __u32 pad; -+ struct vc_sm_cma_ioctl_clean_invalid_block { -+ __u32 invalidate_mode; -+ __u32 block_count; -+ void * __user start_address; -+ __u32 block_size; -+ __u32 inter_block_stride; -+ } s[0]; -+}; -+ - /* IOCTL numbers */ - #define VC_SM_CMA_IOCTL_MEM_ALLOC\ - _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_ALLOC,\ -@@ -84,4 +107,8 @@ struct vc_sm_cma_ioctl_import_dmabuf { - _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_IMPORT_DMABUF,\ - struct vc_sm_cma_ioctl_import_dmabuf) - -+#define VC_SM_CMA_IOCTL_MEM_CLEAN_INVALID2\ -+ _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_CLEAN_INVALID2,\ -+ struct vc_sm_cma_ioctl_clean_invalid2) -+ - #endif /* __VC_SM_CMA_IOCTL_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0626-staging-vcsm-cma-Remove-cache-manipulation-ioctl-fro.patch b/target/linux/brcm2708/patches-4.19/950-0626-staging-vcsm-cma-Remove-cache-manipulation-ioctl-fro.patch new file mode 100644 index 0000000000..38bff7a7f6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0626-staging-vcsm-cma-Remove-cache-manipulation-ioctl-fro.patch @@ -0,0 +1,78 @@ +From b30537425b4bf90311b8d43c95484d9d339be25f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 25 Jun 2019 00:29:44 +0100 +Subject: [PATCH] staging: vcsm-cma: Remove cache manipulation ioctl + from ARM64 + +The cache flushing ioctls are used by the Pi3 HEVC hw-assisted +decoder as it needs finer grained flushing control than dma_ops +allow. +These cache calls are not present for ARM64, therefore disable +them. We are not actively supporting 64bit kernels at present, +and the use case of the HEVC decoder is fairly limited. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -1259,6 +1259,7 @@ error: + return ret; + } + ++#ifndef CONFIG_ARM64 + /* Converts VCSM_CACHE_OP_* to an operating function. */ + static void (*cache_op_to_func(const unsigned int cache_op)) + (const void*, const void*) +@@ -1351,6 +1352,7 @@ out: + + return ret; + } ++#endif + + static long vc_sm_cma_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +@@ -1448,6 +1450,7 @@ static long vc_sm_cma_ioctl(struct file + break; + } + ++#ifndef CONFIG_ARM64 + /* + * Flush/Invalidate the cache for a given mapping. + * Blocks must be pinned (i.e. accessed) before this call. +@@ -1455,6 +1458,7 @@ static long vc_sm_cma_ioctl(struct file + case VC_SM_CMA_CMD_CLEAN_INVALID2: + ret = vc_sm_cma_clean_invalid2(cmdnr, arg); + break; ++#endif + + default: + pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, +@@ -1467,6 +1471,7 @@ static long vc_sm_cma_ioctl(struct file + return ret; + } + ++#ifndef CONFIG_ARM64 + #ifdef CONFIG_COMPAT + struct vc_sm_cma_ioctl_clean_invalid2_32 { + u32 op_count; +@@ -1496,14 +1501,17 @@ static long vc_sm_cma_compat_ioctl(struc + } + } + #endif ++#endif + + /* Device operations that we managed in this driver. */ + static const struct file_operations vc_sm_ops = { + .owner = THIS_MODULE, + .unlocked_ioctl = vc_sm_cma_ioctl, ++#ifndef CONFIG_ARM64 + #ifdef CONFIG_COMPAT + .compat_ioctl = vc_sm_cma_compat_ioctl, + #endif ++#endif + .open = vc_sm_cma_open, + .release = vc_sm_cma_release, + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0627-staging-vcsm-cma-Alter-dev-node-permissions-to-0666.patch b/target/linux/brcm2708/patches-4.19/950-0627-staging-vcsm-cma-Alter-dev-node-permissions-to-0666.patch deleted file mode 100644 index 3acfe65b52..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0627-staging-vcsm-cma-Alter-dev-node-permissions-to-0666.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 4b78daea312bd39e892eb94f8c7905e2d5b682b4 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 13 May 2019 16:47:54 +0100 -Subject: [PATCH 627/806] staging: vcsm-cma: Alter dev node permissions to 0666 - -Until the udev rules are updated, open up access to this node by -default. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -1572,6 +1572,8 @@ static void vc_sm_connected_init(void) - sm_state->misc_dev.name = DEVICE_NAME; - sm_state->misc_dev.fops = &vc_sm_ops; - sm_state->misc_dev.parent = NULL; -+ /* Temporarily set as 666 until udev rules have been sorted */ -+ sm_state->misc_dev.mode = 0666; - ret = misc_register(&sm_state->misc_dev); - if (ret) { - pr_err("vcsm-cma: failed to register misc device.\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0627-staging-vcsm-cma-Rework-to-use-dma-APIs-not-CMA.patch b/target/linux/brcm2708/patches-4.19/950-0627-staging-vcsm-cma-Rework-to-use-dma-APIs-not-CMA.patch new file mode 100644 index 0000000000..e8896c09a0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0627-staging-vcsm-cma-Rework-to-use-dma-APIs-not-CMA.patch @@ -0,0 +1,758 @@ +From e4cb138abe457a6ab9b98458660a1c8e548fab7f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 1 Jul 2019 11:57:25 +0100 +Subject: [PATCH] staging: vcsm-cma: Rework to use dma APIs, not CMA + +Due to a misunderstanding of the DMA mapping APIs, I made +the wrong decision on how to implement this. + +Rework to use dma_alloc_coherent instead of the CMA +API. This also allows it to be built as a module easily. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/vc-sm-cma/Kconfig | 4 +- + .../staging/vc04_services/vc-sm-cma/Makefile | 2 +- + .../staging/vc04_services/vc-sm-cma/vc_sm.c | 291 ++++++++++-------- + .../staging/vc04_services/vc-sm-cma/vc_sm.h | 13 +- + .../vc04_services/vc-sm-cma/vc_sm_cma.c | 98 ------ + .../vc04_services/vc-sm-cma/vc_sm_cma.h | 39 --- + 6 files changed, 168 insertions(+), 279 deletions(-) + delete mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c + delete mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h + +--- a/drivers/staging/vc04_services/vc-sm-cma/Kconfig ++++ b/drivers/staging/vc04_services/vc-sm-cma/Kconfig +@@ -1,6 +1,6 @@ + config BCM_VC_SM_CMA +- bool "VideoCore Shared Memory (CMA) driver" +- depends on BCM2835_VCHIQ && DMA_CMA ++ tristate "VideoCore Shared Memory (CMA) driver" ++ depends on BCM2835_VCHIQ + select RBTREE + select DMA_SHARED_BUFFER + help +--- a/drivers/staging/vc04_services/vc-sm-cma/Makefile ++++ b/drivers/staging/vc04_services/vc-sm-cma/Makefile +@@ -3,6 +3,6 @@ ccflags-y += -Idrivers/staging/vc04_serv + ccflags-y += -D__VCCOREVER__=0 + + vc-sm-cma-$(CONFIG_BCM_VC_SM_CMA) := \ +- vc_sm.o vc_sm_cma_vchi.o vc_sm_cma.o ++ vc_sm.o vc_sm_cma_vchi.o + + obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma.o +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -6,8 +6,8 @@ + * Dave Stevenson + * + * Based on vmcs_sm driver from Broadcom Corporation for some API, +- * and taking some code for CMA/dmabuf handling from the Android Ion +- * driver (Google/Linaro). ++ * and taking some code for buffer allocation and dmabuf handling from ++ * videobuf2. + * + * + * This driver has 3 main uses: +@@ -52,7 +52,6 @@ + #include "vc_sm_cma_vchi.h" + + #include "vc_sm.h" +-#include "vc_sm_cma.h" + #include "vc_sm_knl.h" + #include + +@@ -89,7 +88,6 @@ struct sm_state_t { + struct miscdevice misc_dev; + + struct sm_instance *sm_handle; /* Handle for videocore service. */ +- struct cma *cma_heap; + + spinlock_t kernelid_map_lock; /* Spinlock protecting kernelid_map */ + struct idr kernelid_map; +@@ -110,8 +108,9 @@ struct sm_state_t { + + struct vc_sm_dma_buf_attachment { + struct device *dev; +- struct sg_table *table; ++ struct sg_table sg_table; + struct list_head list; ++ enum dma_data_direction dma_dir; + }; + + /* ---- Private Variables ----------------------------------------------- */ +@@ -202,9 +201,10 @@ static int vc_sm_cma_global_state_show(s + resource->import.attach); + seq_printf(s, " SGT %p\n", + resource->import.sgt); ++ } else { ++ seq_printf(s, " SGT %p\n", ++ resource->alloc.sg_table); + } +- seq_printf(s, " SG_TABLE %p\n", +- resource->sg_table); + seq_printf(s, " DMA_ADDR %pad\n", + &resource->dma_addr); + seq_printf(s, " VC_HANDLE %08x\n", +@@ -296,8 +296,9 @@ static void vc_sm_vpu_free(struct vc_sm_ + */ + static void vc_sm_release_resource(struct vc_sm_buffer *buffer) + { +- pr_debug("[%s]: buffer %p (name %s, size %zu)\n", +- __func__, buffer, buffer->name, buffer->size); ++ pr_debug("[%s]: buffer %p (name %s, size %zu), imported %u\n", ++ __func__, buffer, buffer->name, buffer->size, ++ buffer->imported); + + if (buffer->vc_handle) { + /* We've sent the unmap request but not had the response. */ +@@ -313,8 +314,6 @@ static void vc_sm_release_resource(struc + + /* Release the allocation (whether imported dmabuf or CMA allocation) */ + if (buffer->imported) { +- pr_debug("%s: Release imported dmabuf %p\n", __func__, +- buffer->import.dma_buf); + if (buffer->import.dma_buf) + dma_buf_put(buffer->import.dma_buf); + else +@@ -322,16 +321,8 @@ static void vc_sm_release_resource(struc + __func__, buffer); + buffer->import.dma_buf = NULL; + } else { +- if (buffer->sg_table) { +- /* Our own allocation that we need to dma_unmap_sg */ +- dma_unmap_sg(&sm_state->pdev->dev, +- buffer->sg_table->sgl, +- buffer->sg_table->nents, +- DMA_BIDIRECTIONAL); +- } +- pr_debug("%s: Release our allocation\n", __func__); +- vc_sm_cma_buffer_free(&buffer->alloc); +- pr_debug("%s: Release our allocation - done\n", __func__); ++ dma_free_coherent(&sm_state->pdev->dev, buffer->size, ++ buffer->cookie, buffer->dma_addr); + } + + +@@ -371,38 +362,6 @@ static struct vc_sm_privdata_t *vc_sm_cm + return file_data; + } + +-static struct sg_table *dup_sg_table(struct sg_table *table) +-{ +- struct sg_table *new_table; +- int ret, i; +- struct scatterlist *sg, *new_sg; +- +- new_table = kzalloc(sizeof(*new_table), GFP_KERNEL); +- if (!new_table) +- return ERR_PTR(-ENOMEM); +- +- ret = sg_alloc_table(new_table, table->nents, GFP_KERNEL); +- if (ret) { +- kfree(new_table); +- return ERR_PTR(ret); +- } +- +- new_sg = new_table->sgl; +- for_each_sg(table->sgl, sg, table->nents, i) { +- memcpy(new_sg, sg, sizeof(*sg)); +- sg->dma_address = 0; +- new_sg = sg_next(new_sg); +- } +- +- return new_table; +-} +- +-static void free_duped_table(struct sg_table *table) +-{ +- sg_free_table(table); +- kfree(table); +-} +- + /* Dma buf operations for use with our own allocations */ + + static int vc_sm_dma_buf_attach(struct dma_buf *dmabuf, +@@ -410,28 +369,45 @@ static int vc_sm_dma_buf_attach(struct d + + { + struct vc_sm_dma_buf_attachment *a; +- struct sg_table *table; ++ struct sg_table *sgt; + struct vc_sm_buffer *buf = dmabuf->priv; ++ struct scatterlist *rd, *wr; ++ int ret, i; + + a = kzalloc(sizeof(*a), GFP_KERNEL); + if (!a) + return -ENOMEM; + +- table = dup_sg_table(buf->sg_table); +- if (IS_ERR(table)) { ++ pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); ++ ++ mutex_lock(&buf->lock); ++ ++ INIT_LIST_HEAD(&a->list); ++ ++ sgt = &a->sg_table; ++ ++ /* Copy the buf->base_sgt scatter list to the attachment, as we can't ++ * map the same scatter list to multiple attachments at the same time. ++ */ ++ ret = sg_alloc_table(sgt, buf->alloc.sg_table->orig_nents, GFP_KERNEL); ++ if (ret) { + kfree(a); +- return PTR_ERR(table); ++ return -ENOMEM; + } + +- a->table = table; +- INIT_LIST_HEAD(&a->list); ++ rd = buf->alloc.sg_table->sgl; ++ wr = sgt->sgl; ++ for (i = 0; i < sgt->orig_nents; ++i) { ++ sg_set_page(wr, sg_page(rd), rd->length, rd->offset); ++ rd = sg_next(rd); ++ wr = sg_next(wr); ++ } + ++ a->dma_dir = DMA_NONE; + attachment->priv = a; + +- mutex_lock(&buf->lock); + list_add(&a->list, &buf->attachments); + mutex_unlock(&buf->lock); +- pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); + + return 0; + } +@@ -441,9 +417,20 @@ static void vc_sm_dma_buf_detach(struct + { + struct vc_sm_dma_buf_attachment *a = attachment->priv; + struct vc_sm_buffer *buf = dmabuf->priv; ++ struct sg_table *sgt; + + pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); +- free_duped_table(a->table); ++ if (!a) ++ return; ++ ++ sgt = &a->sg_table; ++ ++ /* release the scatterlist cache */ ++ if (a->dma_dir != DMA_NONE) ++ dma_unmap_sg(attachment->dev, sgt->sgl, sgt->orig_nents, ++ a->dma_dir); ++ sg_free_table(sgt); ++ + mutex_lock(&buf->lock); + list_del(&a->list); + mutex_unlock(&buf->lock); +@@ -455,13 +442,38 @@ static struct sg_table *vc_sm_map_dma_bu + enum dma_data_direction direction) + { + struct vc_sm_dma_buf_attachment *a = attachment->priv; ++ /* stealing dmabuf mutex to serialize map/unmap operations */ ++ struct mutex *lock = &attachment->dmabuf->lock; + struct sg_table *table; + +- table = a->table; ++ mutex_lock(lock); ++ pr_debug("%s attachment %p\n", __func__, attachment); ++ table = &a->sg_table; ++ ++ /* return previously mapped sg table */ ++ if (a->dma_dir == direction) { ++ mutex_unlock(lock); ++ return table; ++ } ++ ++ /* release any previous cache */ ++ if (a->dma_dir != DMA_NONE) { ++ dma_unmap_sg(attachment->dev, table->sgl, table->orig_nents, ++ a->dma_dir); ++ a->dma_dir = DMA_NONE; ++ } ++ ++ /* mapping to the client with new direction */ ++ table->nents = dma_map_sg(attachment->dev, table->sgl, ++ table->orig_nents, direction); ++ if (!table->nents) { ++ pr_err("failed to map scatterlist\n"); ++ mutex_unlock(lock); ++ return ERR_PTR(-EIO); ++ } + +- if (!dma_map_sg(attachment->dev, table->sgl, table->nents, +- direction)) +- return ERR_PTR(-ENOMEM); ++ a->dma_dir = direction; ++ mutex_unlock(lock); + + pr_debug("%s attachment %p\n", __func__, attachment); + return table; +@@ -478,41 +490,26 @@ static void vc_sm_unmap_dma_buf(struct d + static int vc_sm_dmabuf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma) + { + struct vc_sm_buffer *buf = dmabuf->priv; +- struct sg_table *table = buf->sg_table; +- unsigned long addr = vma->vm_start; +- unsigned long offset = vma->vm_pgoff * PAGE_SIZE; +- struct scatterlist *sg; +- int i; +- int ret = 0; ++ int ret; + + pr_debug("%s dmabuf %p, buf %p, vm_start %08lX\n", __func__, dmabuf, +- buf, addr); ++ buf, vma->vm_start); + + mutex_lock(&buf->lock); + + /* now map it to userspace */ +- for_each_sg(table->sgl, sg, table->nents, i) { +- struct page *page = sg_page(sg); +- unsigned long remainder = vma->vm_end - addr; +- unsigned long len = sg->length; ++ vma->vm_pgoff = 0; + +- if (offset >= sg->length) { +- offset -= sg->length; +- continue; +- } else if (offset) { +- page += offset / PAGE_SIZE; +- len = sg->length - offset; +- offset = 0; +- } +- len = min(len, remainder); +- ret = remap_pfn_range(vma, addr, page_to_pfn(page), len, +- vma->vm_page_prot); +- if (ret) +- break; +- addr += len; +- if (addr >= vma->vm_end) +- break; ++ ret = dma_mmap_coherent(&sm_state->pdev->dev, vma, buf->cookie, ++ buf->dma_addr, buf->size); ++ ++ if (ret) { ++ pr_err("Remapping memory failed, error: %d\n", ret); ++ return ret; + } ++ ++ vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; ++ + mutex_unlock(&buf->lock); + + if (ret) +@@ -570,8 +567,8 @@ static int vc_sm_dma_buf_begin_cpu_acces + mutex_lock(&buf->lock); + + list_for_each_entry(a, &buf->attachments, list) { +- dma_sync_sg_for_cpu(a->dev, a->table->sgl, a->table->nents, +- direction); ++ dma_sync_sg_for_cpu(a->dev, a->sg_table.sgl, ++ a->sg_table.nents, direction); + } + mutex_unlock(&buf->lock); + +@@ -593,8 +590,8 @@ static int vc_sm_dma_buf_end_cpu_access( + mutex_lock(&buf->lock); + + list_for_each_entry(a, &buf->attachments, list) { +- dma_sync_sg_for_device(a->dev, a->table->sgl, a->table->nents, +- direction); ++ dma_sync_sg_for_device(a->dev, a->sg_table.sgl, ++ a->sg_table.nents, direction); + } + mutex_unlock(&buf->lock); + +@@ -625,7 +622,9 @@ static const struct dma_buf_ops dma_buf_ + .map = vc_sm_dma_buf_kmap, + .unmap = vc_sm_dma_buf_kunmap, + }; ++ + /* Dma_buf operations for chaining through to an imported dma_buf */ ++ + static + int vc_sm_import_dma_buf_attach(struct dma_buf *dmabuf, + struct dma_buf_attachment *attachment) +@@ -819,7 +818,7 @@ vc_sm_cma_import_dmabuf_internal(struct + + import.type = VC_SM_ALLOC_NON_CACHED; + dma_addr = sg_dma_address(sgt->sgl); +- import.addr = (uint32_t)dma_addr; ++ import.addr = (u32)dma_addr; + if ((import.addr & 0xC0000000) != 0xC0000000) { + pr_err("%s: Expecting an uncached alias for dma_addr %pad\n", + __func__, &dma_addr); +@@ -911,11 +910,12 @@ error: + return ret; + } + +-static int vc_sm_cma_vpu_alloc(u32 size, uint32_t align, const char *name, ++static int vc_sm_cma_vpu_alloc(u32 size, u32 align, const char *name, + u32 mem_handle, struct vc_sm_buffer **ret_buffer) + { + DEFINE_DMA_BUF_EXPORT_INFO(exp_info); + struct vc_sm_buffer *buffer = NULL; ++ struct sg_table *sgt; + int aligned_size; + int ret = 0; + +@@ -938,23 +938,34 @@ static int vc_sm_cma_vpu_alloc(u32 size, + */ + mutex_lock(&buffer->lock); + +- if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, +- aligned_size)) { +- pr_err("[%s]: cma alloc of %d bytes failed\n", ++ buffer->cookie = dma_alloc_coherent(&sm_state->pdev->dev, ++ aligned_size, &buffer->dma_addr, ++ GFP_KERNEL); ++ if (!buffer->cookie) { ++ pr_err("[%s]: dma_alloc_coherent alloc of %d bytes failed\n", + __func__, aligned_size); + ret = -ENOMEM; + goto error; + } +- buffer->sg_table = buffer->alloc.sg_table; + +- pr_debug("[%s]: cma alloc of %d bytes success\n", ++ pr_debug("[%s]: alloc of %d bytes success\n", + __func__, aligned_size); + +- if (dma_map_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, +- buffer->sg_table->nents, DMA_BIDIRECTIONAL) <= 0) { +- pr_err("[%s]: dma_map_sg failed\n", __func__); ++ sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); ++ if (!sgt) { ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ ret = dma_get_sgtable(&sm_state->pdev->dev, sgt, buffer->cookie, ++ buffer->dma_addr, buffer->size); ++ if (ret < 0) { ++ pr_err("failed to get scatterlist from DMA API\n"); ++ kfree(sgt); ++ ret = -ENOMEM; + goto error; + } ++ buffer->alloc.sg_table = sgt; + + INIT_LIST_HEAD(&buffer->attachments); + +@@ -971,10 +982,10 @@ static int vc_sm_cma_vpu_alloc(u32 size, + ret = PTR_ERR(buffer->dma_buf); + goto error; + } +- buffer->dma_addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); ++ buffer->dma_addr = (u32)sg_dma_address(buffer->alloc.sg_table->sgl); + if ((buffer->dma_addr & 0xC0000000) != 0xC0000000) { +- pr_err("%s: Expecting an uncached alias for dma_addr %pad\n", +- __func__, &buffer->dma_addr); ++ pr_warn_once("%s: Expecting an uncached alias for dma_addr %pad\n", ++ __func__, &buffer->dma_addr); + buffer->dma_addr |= 0xC0000000; + } + buffer->private = sm_state->vpu_allocs; +@@ -1145,6 +1156,7 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p + struct vc_sm_import import = { 0 }; + struct vc_sm_import_result result = { 0 }; + struct dma_buf *dmabuf = NULL; ++ struct sg_table *sgt; + int aligned_size; + int ret = 0; + int status; +@@ -1162,18 +1174,13 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p + goto error; + } + +- if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, +- aligned_size)) { +- pr_err("[%s]: cma alloc of %d bytes failed\n", ++ buffer->cookie = dma_alloc_coherent(&sm_state->pdev->dev, ++ aligned_size, ++ &buffer->dma_addr, ++ GFP_KERNEL); ++ if (!buffer->cookie) { ++ pr_err("[%s]: dma_alloc_coherent alloc of %d bytes failed\n", + __func__, aligned_size); +- kfree(buffer); +- return -ENOMEM; +- } +- buffer->sg_table = buffer->alloc.sg_table; +- +- if (dma_map_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, +- buffer->sg_table->nents, DMA_BIDIRECTIONAL) <= 0) { +- pr_err("[%s]: dma_map_sg failed\n", __func__); + ret = -ENOMEM; + goto error; + } +@@ -1204,7 +1211,7 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p + } + buffer->dma_buf = dmabuf; + +- import.addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); ++ import.addr = buffer->dma_addr; + import.size = aligned_size; + import.kernel_id = get_kernel_id(buffer); + +@@ -1229,10 +1236,25 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p + buffer->private = private; + buffer->vc_handle = result.res_handle; + buffer->size = import.size; +- buffer->dma_addr = import.addr; + buffer->vpu_state = VPU_MAPPED; + buffer->kernel_id = import.kernel_id; +- //buffer->res_cached = ioparam->cached; ++ ++ sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); ++ if (!sgt) { ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ ret = dma_get_sgtable(&sm_state->pdev->dev, sgt, buffer->cookie, ++ buffer->dma_addr, buffer->size); ++ if (ret < 0) { ++ /* FIXME: error handling */ ++ pr_err("failed to get scatterlist from DMA API\n"); ++ kfree(sgt); ++ ret = -ENOMEM; ++ goto error; ++ } ++ buffer->alloc.sg_table = sgt; + + fd = dma_buf_fd(dmabuf, O_CLOEXEC); + if (fd < 0) +@@ -1250,11 +1272,19 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p + return 0; + + error: +- if (buffer) { +- pr_err("[%s]: something failed - cleanup. ret %d\n", __func__, +- ret); ++ pr_err("[%s]: something failed - cleanup. ret %d\n", __func__, ret); + ++ if (dmabuf) { ++ /* dmabuf has been exported, therefore allow dmabuf cleanup to ++ * deal with this ++ */ + dma_buf_put(dmabuf); ++ } else { ++ /* No dmabuf, therefore just free the buffer here */ ++ if (buffer->cookie) ++ dma_free_coherent(&sm_state->pdev->dev, buffer->size, ++ buffer->cookie, buffer->dma_addr); ++ kfree(buffer); + } + return ret; + } +@@ -1527,13 +1557,6 @@ static void vc_sm_connected_init(void) + + pr_info("[%s]: start\n", __func__); + +- vc_sm_cma_add_heaps(&sm_state->cma_heap); +- if (!sm_state->cma_heap) { +- pr_err("[%s]: failed to initialise CMA heap\n", +- __func__); +- return; +- } +- + /* + * Initialize and create a VCHI connection for the shared memory service + * running on videocore. +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h +@@ -21,8 +21,6 @@ + #include + #include + +-#include "vc_sm_cma.h" +- + #define VC_SM_MAX_NAME_LEN 32 + + enum vc_sm_vpu_mapping_state { +@@ -31,6 +29,12 @@ enum vc_sm_vpu_mapping_state { + VPU_UNMAPPING + }; + ++struct vc_sm_alloc_data { ++ unsigned long num_pages; ++ void *priv_virt; ++ struct sg_table *sg_table; ++}; ++ + struct vc_sm_imported { + struct dma_buf *dma_buf; + struct dma_buf_attachment *attach; +@@ -56,8 +60,6 @@ struct vc_sm_buffer { + int in_use:1; /* Kernel is still using this resource */ + int imported:1; /* Imported dmabuf */ + +- struct sg_table *sg_table; +- + enum vc_sm_vpu_mapping_state vpu_state; + u32 vc_handle; /* VideoCore handle for this buffer */ + int vpu_allocated; /* +@@ -69,11 +71,12 @@ struct vc_sm_buffer { + /* DMABUF related fields */ + struct dma_buf *dma_buf; + dma_addr_t dma_addr; ++ void *cookie; + + struct vc_sm_privdata_t *private; + + union { +- struct vc_sm_cma_alloc_data alloc; ++ struct vc_sm_alloc_data alloc; + struct vc_sm_imported import; + }; + }; +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c ++++ /dev/null +@@ -1,98 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0 +-/* +- * VideoCore Shared Memory CMA allocator +- * +- * Copyright: 2018, Raspberry Pi (Trading) Ltd +- * +- * Based on the Android ION allocator +- * Copyright (C) Linaro 2012 +- * Author: for ST-Ericsson. +- * +- */ +- +-#include +-#include +-#include +-#include +-#include +- +-#include "vc_sm_cma.h" +- +-/* CMA heap operations functions */ +-int vc_sm_cma_buffer_allocate(struct cma *cma_heap, +- struct vc_sm_cma_alloc_data *buffer, +- unsigned long len) +-{ +- /* len should already be page aligned */ +- unsigned long num_pages = len / PAGE_SIZE; +- struct sg_table *table; +- struct page *pages; +- int ret; +- +- pages = cma_alloc(cma_heap, num_pages, 0, GFP_KERNEL); +- if (!pages) +- return -ENOMEM; +- +- table = kmalloc(sizeof(*table), GFP_KERNEL); +- if (!table) +- goto err; +- +- ret = sg_alloc_table(table, 1, GFP_KERNEL); +- if (ret) +- goto free_mem; +- +- sg_set_page(table->sgl, pages, len, 0); +- +- buffer->priv_virt = pages; +- buffer->sg_table = table; +- buffer->cma_heap = cma_heap; +- buffer->num_pages = num_pages; +- return 0; +- +-free_mem: +- kfree(table); +-err: +- cma_release(cma_heap, pages, num_pages); +- return -ENOMEM; +-} +- +-void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer) +-{ +- struct cma *cma_heap = buffer->cma_heap; +- struct page *pages = buffer->priv_virt; +- +- /* release memory */ +- if (cma_heap) +- cma_release(cma_heap, pages, buffer->num_pages); +- +- /* release sg table */ +- if (buffer->sg_table) { +- sg_free_table(buffer->sg_table); +- kfree(buffer->sg_table); +- buffer->sg_table = NULL; +- } +-} +- +-int __vc_sm_cma_add_heaps(struct cma *cma, void *priv) +-{ +- struct cma **heap = (struct cma **)priv; +- const char *name = cma_get_name(cma); +- +- if (!(*heap)) { +- phys_addr_t phys_addr = cma_get_base(cma); +- +- pr_debug("%s: Adding cma heap %s (start %pap, size %lu) for use by vcsm\n", +- __func__, name, &phys_addr, cma_get_size(cma)); +- *heap = cma; +- } else { +- pr_err("%s: Ignoring heap %s as already set\n", +- __func__, name); +- } +- +- return 0; +-} +- +-void vc_sm_cma_add_heaps(struct cma **cma_heap) +-{ +- cma_for_each_area(__vc_sm_cma_add_heaps, cma_heap); +-} +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h ++++ /dev/null +@@ -1,39 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0 */ +- +-/* +- * VideoCore Shared Memory CMA allocator +- * +- * Copyright: 2018, Raspberry Pi (Trading) Ltd +- * +- * Based on the Android ION allocator +- * Copyright (C) Linaro 2012 +- * Author: for ST-Ericsson. +- * +- * This software is licensed under the terms of the GNU General Public +- * License version 2, as published by the Free Software Foundation, and +- * may be copied, distributed, and modified under those terms. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- */ +-#ifndef VC_SM_CMA_H +-#define VC_SM_CMA_H +- +-struct vc_sm_cma_alloc_data { +- struct cma *cma_heap; +- unsigned long num_pages; +- void *priv_virt; +- struct sg_table *sg_table; +-}; +- +-int vc_sm_cma_buffer_allocate(struct cma *cma_heap, +- struct vc_sm_cma_alloc_data *buffer, +- unsigned long len); +-void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer); +- +-void vc_sm_cma_add_heaps(struct cma **cma_heap); +- +-#endif diff --git a/target/linux/brcm2708/patches-4.19/950-0628-staging-vc-sm-cma-Fix-the-few-remaining-coding-style.patch b/target/linux/brcm2708/patches-4.19/950-0628-staging-vc-sm-cma-Fix-the-few-remaining-coding-style.patch new file mode 100644 index 0000000000..6c61023cad --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0628-staging-vc-sm-cma-Fix-the-few-remaining-coding-style.patch @@ -0,0 +1,188 @@ +From 38ae4957840ff9578a497422a8ca758549f734d5 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 2 Jul 2019 17:19:04 +0100 +Subject: [PATCH] staging: vc-sm-cma: Fix the few remaining coding + style issues + +Fix a few minor checkpatch complaints to make the driver clean + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/vc-sm-cma/vc_sm.c | 6 +- + .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 128 +++++++++--------- + 2 files changed, 65 insertions(+), 69 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -325,7 +325,6 @@ static void vc_sm_release_resource(struc + buffer->cookie, buffer->dma_addr); + } + +- + /* Free our buffer. Start by removing it from the list */ + mutex_lock(&sm_state->map_lock); + list_del(&buffer->global_buffer_list); +@@ -1365,7 +1364,8 @@ static int vc_sm_cma_clean_invalid2(unsi + } + + for (i = 0; i < ioparam.op_count; i++) { +- const struct vc_sm_cma_ioctl_clean_invalid_block * const op = block + i; ++ const struct vc_sm_cma_ioctl_clean_invalid_block * const op = ++ block + i; + + if (op->invalidate_mode == VC_SM_CACHE_OP_NOP) + continue; +@@ -1637,8 +1637,6 @@ err_remove_misc_dev: + err_remove_debugfs: + debugfs_remove_recursive(sm_state->dir_root); + vc_sm_cma_vchi_stop(&sm_state->sm_handle); +- +- return; + } + + /* Driver loading. */ +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c +@@ -188,79 +188,77 @@ static int vc_sm_cma_vchi_videocore_io(v + if (svc_use) + vchi_service_release(instance->vchi_handle[0]); + svc_use = 0; +- if (!wait_for_completion_interruptible(&instance->io_cmplt)) { +- vchi_service_use(instance->vchi_handle[0]); +- svc_use = 1; +- +- do { +- /* +- * Get new command and move it to response list +- */ +- mutex_lock(&instance->lock); +- if (list_empty(&instance->cmd_list)) { +- /* no more commands to process */ +- mutex_unlock(&instance->lock); +- break; +- } +- cmd = +- list_first_entry(&instance->cmd_list, +- struct sm_cmd_rsp_blk, +- head); +- list_move(&cmd->head, &instance->rsp_list); +- cmd->sent = 1; +- mutex_unlock(&instance->lock); + +- /* Send the command */ +- status = bcm2835_vchi_msg_queue( +- instance->vchi_handle[0], +- cmd->msg, cmd->length); +- if (status) { +- pr_err("%s: failed to queue message (%d)", +- __func__, status); +- } +- +- /* If no reply is needed then we're done */ +- if (!cmd->wait) { +- mutex_lock(&instance->lock); +- list_del(&cmd->head); +- mutex_unlock(&instance->lock); +- vc_vchi_cmd_delete(instance, cmd); +- continue; +- } +- +- if (status) { +- complete(&cmd->cmplt); +- continue; +- } +- +- } while (1); +- +- while (!vchi_msg_peek(instance->vchi_handle[0], +- (void **)&reply, &reply_len, +- VCHI_FLAGS_NONE)) { +- if (reply->trans_id & 0x80000000) { +- /* Async event or cmd from the VPU */ +- if (instance->vpu_event) +- instance->vpu_event( +- instance, reply, +- reply_len); +- } else { +- vc_sm_cma_vchi_rx_ack(instance, cmd, +- reply, reply_len); +- } ++ if (wait_for_completion_interruptible(&instance->io_cmplt)) ++ continue; + +- vchi_msg_remove(instance->vchi_handle[0]); +- } ++ vchi_service_use(instance->vchi_handle[0]); ++ svc_use = 1; + +- /* Go through the dead list and free them */ ++ do { ++ /* ++ * Get new command and move it to response list ++ */ + mutex_lock(&instance->lock); +- list_for_each_entry_safe(cmd, cmd_tmp, +- &instance->dead_list, head) { ++ if (list_empty(&instance->cmd_list)) { ++ /* no more commands to process */ ++ mutex_unlock(&instance->lock); ++ break; ++ } ++ cmd = list_first_entry(&instance->cmd_list, ++ struct sm_cmd_rsp_blk, head); ++ list_move(&cmd->head, &instance->rsp_list); ++ cmd->sent = 1; ++ mutex_unlock(&instance->lock); ++ ++ /* Send the command */ ++ status = ++ bcm2835_vchi_msg_queue(instance->vchi_handle[0], ++ cmd->msg, cmd->length); ++ if (status) { ++ pr_err("%s: failed to queue message (%d)", ++ __func__, status); ++ } ++ ++ /* If no reply is needed then we're done */ ++ if (!cmd->wait) { ++ mutex_lock(&instance->lock); + list_del(&cmd->head); ++ mutex_unlock(&instance->lock); + vc_vchi_cmd_delete(instance, cmd); ++ continue; + } +- mutex_unlock(&instance->lock); ++ ++ if (status) { ++ complete(&cmd->cmplt); ++ continue; ++ } ++ ++ } while (1); ++ ++ while (!vchi_msg_peek(instance->vchi_handle[0], (void **)&reply, ++ &reply_len, VCHI_FLAGS_NONE)) { ++ if (reply->trans_id & 0x80000000) { ++ /* Async event or cmd from the VPU */ ++ if (instance->vpu_event) ++ instance->vpu_event(instance, reply, ++ reply_len); ++ } else { ++ vc_sm_cma_vchi_rx_ack(instance, cmd, reply, ++ reply_len); ++ } ++ ++ vchi_msg_remove(instance->vchi_handle[0]); ++ } ++ ++ /* Go through the dead list and free them */ ++ mutex_lock(&instance->lock); ++ list_for_each_entry_safe(cmd, cmd_tmp, &instance->dead_list, ++ head) { ++ list_del(&cmd->head); ++ vc_vchi_cmd_delete(instance, cmd); + } ++ mutex_unlock(&instance->lock); + } + + return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0628-staging-vcsm-cma-Drop-logging-level-on-messages-in-v.patch b/target/linux/brcm2708/patches-4.19/950-0628-staging-vcsm-cma-Drop-logging-level-on-messages-in-v.patch deleted file mode 100644 index e237407081..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0628-staging-vcsm-cma-Drop-logging-level-on-messages-in-v.patch +++ /dev/null @@ -1,33 +0,0 @@ -From c38256621d4dffbbc0c19737d724724f04b0df9a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 16 May 2019 15:17:19 +0100 -Subject: [PATCH 628/806] staging: vcsm-cma: Drop logging level on messages in - vc_sm_release_resource - -They weren't errors but were logged as such. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -301,14 +301,13 @@ static void vc_sm_release_resource(struc - - if (buffer->vc_handle) { - /* We've sent the unmap request but not had the response. */ -- pr_err("[%s]: Waiting for VPU unmap response on %p\n", -- __func__, buffer); -+ pr_debug("[%s]: Waiting for VPU unmap response on %p\n", -+ __func__, buffer); - goto defer; - } - if (buffer->in_use) { - /* dmabuf still in use - we await the release */ -- pr_err("[%s]: buffer %p is still in use\n", -- __func__, buffer); -+ pr_debug("[%s]: buffer %p is still in use\n", __func__, buffer); - goto defer; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0629-Revert-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-bu.patch b/target/linux/brcm2708/patches-4.19/950-0629-Revert-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-bu.patch new file mode 100644 index 0000000000..8161bb2659 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0629-Revert-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-bu.patch @@ -0,0 +1,55 @@ +From 768ab361410487b05561de854a994a2888cd430a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 28 Jun 2019 11:30:49 +0100 +Subject: [PATCH] Revert "media: vb2: Allow reqbufs(0) with "in use" + MMAP buffers" + +This reverts commit a2c73e18c1f657de6d654f51effa0a94863abbd8. +An alternative version was accepted upstream. Revert this patch to +apply that one. + +Signed-off-by: Dave Stevenson +--- + .../media/common/videobuf2/videobuf2-core.c | 23 +++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/drivers/media/common/videobuf2/videobuf2-core.c ++++ b/drivers/media/common/videobuf2/videobuf2-core.c +@@ -554,6 +554,20 @@ bool vb2_buffer_in_use(struct vb2_queue + } + EXPORT_SYMBOL(vb2_buffer_in_use); + ++/* ++ * __buffers_in_use() - return true if any buffers on the queue are in use and ++ * the queue cannot be freed (by the means of REQBUFS(0)) call ++ */ ++static bool __buffers_in_use(struct vb2_queue *q) ++{ ++ unsigned int buffer; ++ for (buffer = 0; buffer < q->num_buffers; ++buffer) { ++ if (vb2_buffer_in_use(q, q->bufs[buffer])) ++ return true; ++ } ++ return false; ++} ++ + void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb) + { + call_void_bufop(q, fill_user_buffer, q->bufs[index], pb); +@@ -665,7 +679,16 @@ int vb2_core_reqbufs(struct vb2_queue *q + + if (*count == 0 || q->num_buffers != 0 || + (q->memory != VB2_MEMORY_UNKNOWN && q->memory != memory)) { ++ /* ++ * We already have buffers allocated, so first check if they ++ * are not in use and can be freed. ++ */ + mutex_lock(&q->mmap_lock); ++ if (q->memory == VB2_MEMORY_MMAP && __buffers_in_use(q)) { ++ mutex_unlock(&q->mmap_lock); ++ dprintk(1, "memory in use, cannot free\n"); ++ return -EBUSY; ++ } + + /* + * Call queue_cancel to clean up any buffers in the PREPARED or diff --git a/target/linux/brcm2708/patches-4.19/950-0629-staging-vcsm-cma-Fixup-the-alloc-code-handling-of-ke.patch b/target/linux/brcm2708/patches-4.19/950-0629-staging-vcsm-cma-Fixup-the-alloc-code-handling-of-ke.patch deleted file mode 100644 index 24c4fe8044..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0629-staging-vcsm-cma-Fixup-the-alloc-code-handling-of-ke.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 52f881e3afa89bb1ca9e8b037f7600bcc97626e8 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 22 May 2019 15:40:37 +0100 -Subject: [PATCH 629/806] staging: vcsm-cma: Fixup the alloc code handling of - kernel_id - -The allocation code had been copied in from an old branch prior -to having added the IDR for 64bit support. It was therefore pushing -a pointer into the kernel_id field instead of an IDR handle, the -lookup therefore failed, and we never released the buffer. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -1206,7 +1206,7 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p - - import.addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); - import.size = aligned_size; -- import.kernel_id = (uint32_t)buffer; -+ import.kernel_id = get_kernel_id(buffer); - - /* Wrap it into a videocore buffer. */ - status = vc_sm_cma_vchi_import(sm_state->sm_handle, &import, &result, -@@ -1231,6 +1231,7 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p - buffer->size = import.size; - buffer->dma_addr = import.addr; - buffer->vpu_state = VPU_MAPPED; -+ buffer->kernel_id = import.kernel_id; - //buffer->res_cached = ioparam->cached; - - fd = dma_buf_fd(dmabuf, O_CLOEXEC); diff --git a/target/linux/brcm2708/patches-4.19/950-0630-Pulled-in-the-multi-frame-buffer-support-from-the-Pi.patch b/target/linux/brcm2708/patches-4.19/950-0630-Pulled-in-the-multi-frame-buffer-support-from-the-Pi.patch deleted file mode 100644 index eb07457cb2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0630-Pulled-in-the-multi-frame-buffer-support-from-the-Pi.patch +++ /dev/null @@ -1,925 +0,0 @@ -From 3e33fb46eb8791ba39fe4781f278487bcc2c3356 Mon Sep 17 00:00:00 2001 -From: James Hughes -Date: Thu, 14 Mar 2019 13:27:54 +0000 -Subject: [PATCH 630/806] Pulled in the multi frame buffer support from the Pi3 - repo - ---- - drivers/video/fbdev/bcm2708_fb.c | 580 +++++++++++++++------ - include/soc/bcm2835/raspberrypi-firmware.h | 4 + - 2 files changed, 432 insertions(+), 152 deletions(-) - ---- a/drivers/video/fbdev/bcm2708_fb.c -+++ b/drivers/video/fbdev/bcm2708_fb.c -@@ -2,6 +2,7 @@ - * linux/drivers/video/bcm2708_fb.c - * - * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2018 Raspberry Pi (Trading) Ltd - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive -@@ -13,6 +14,7 @@ - * Copyright 1999-2001 Jeff Garzik - * - */ -+ - #include - #include - #include -@@ -36,6 +38,7 @@ - #include - #include - #include -+#include - - //#define BCM2708_FB_DEBUG - #define MODULE_NAME "bcm2708_fb" -@@ -82,62 +85,139 @@ struct bcm2708_fb_stats { - u32 dma_irqs; - }; - -+struct vc4_display_settings_t { -+ u32 display_num; -+ u32 width; -+ u32 height; -+ u32 pitch; -+ u32 depth; -+ u32 virtual_width; -+ u32 virtual_height; -+ u32 virtual_width_offset; -+ u32 virtual_height_offset; -+ unsigned long fb_bus_address; -+}; -+ -+struct bcm2708_fb_dev; -+ - struct bcm2708_fb { - struct fb_info fb; - struct platform_device *dev; -- struct rpi_firmware *fw; - u32 cmap[16]; - u32 gpu_cmap[256]; -+ struct dentry *debugfs_dir; -+ struct dentry *debugfs_subdir; -+ unsigned long fb_bus_address; -+ struct { u32 base, length; } gpu; -+ struct vc4_display_settings_t display_settings; -+ struct debugfs_regset32 screeninfo_regset; -+ struct bcm2708_fb_dev *fbdev; -+ unsigned int image_size; -+ dma_addr_t dma_addr; -+ void *cpuaddr; -+}; -+ -+#define MAX_FRAMEBUFFERS 3 -+ -+struct bcm2708_fb_dev { -+ int firmware_supports_multifb; -+ /* Protects the DMA system from multiple FB access */ -+ struct mutex dma_mutex; - int dma_chan; - int dma_irq; - void __iomem *dma_chan_base; -- void *cb_base; /* DMA control blocks */ -- dma_addr_t cb_handle; -- struct dentry *debugfs_dir; - wait_queue_head_t dma_waitq; -- struct bcm2708_fb_stats stats; -- unsigned long fb_bus_address; -- struct { u32 base, length; } gpu; -+ bool disable_arm_alloc; -+ struct bcm2708_fb_stats dma_stats; -+ void *cb_base; /* DMA control blocks */ -+ dma_addr_t cb_handle; -+ int instance_count; -+ int num_displays; -+ struct rpi_firmware *fw; -+ struct bcm2708_fb displays[MAX_FRAMEBUFFERS]; - }; - - #define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) - - static void bcm2708_fb_debugfs_deinit(struct bcm2708_fb *fb) - { -- debugfs_remove_recursive(fb->debugfs_dir); -- fb->debugfs_dir = NULL; -+ debugfs_remove_recursive(fb->debugfs_subdir); -+ fb->debugfs_subdir = NULL; -+ -+ fb->fbdev->instance_count--; -+ -+ if (!fb->fbdev->instance_count) { -+ debugfs_remove_recursive(fb->debugfs_dir); -+ fb->debugfs_dir = NULL; -+ } - } - - static int bcm2708_fb_debugfs_init(struct bcm2708_fb *fb) - { -+ char buf[3]; -+ struct bcm2708_fb_dev *fbdev = fb->fbdev; -+ - static struct debugfs_reg32 stats_registers[] = { -- { -- "dma_copies", -- offsetof(struct bcm2708_fb_stats, dma_copies) -- }, -- { -- "dma_irqs", -- offsetof(struct bcm2708_fb_stats, dma_irqs) -- }, -+ {"dma_copies", offsetof(struct bcm2708_fb_stats, dma_copies)}, -+ {"dma_irqs", offsetof(struct bcm2708_fb_stats, dma_irqs)}, - }; - -- fb->debugfs_dir = debugfs_create_dir(DRIVER_NAME, NULL); -+ static struct debugfs_reg32 screeninfo[] = { -+ {"width", offsetof(struct fb_var_screeninfo, xres)}, -+ {"height", offsetof(struct fb_var_screeninfo, yres)}, -+ {"bpp", offsetof(struct fb_var_screeninfo, bits_per_pixel)}, -+ {"xres_virtual", offsetof(struct fb_var_screeninfo, xres_virtual)}, -+ {"yres_virtual", offsetof(struct fb_var_screeninfo, yres_virtual)}, -+ {"xoffset", offsetof(struct fb_var_screeninfo, xoffset)}, -+ {"yoffset", offsetof(struct fb_var_screeninfo, yoffset)}, -+ }; -+ -+ fb->debugfs_dir = debugfs_lookup(DRIVER_NAME, NULL); -+ -+ if (!fb->debugfs_dir) -+ fb->debugfs_dir = debugfs_create_dir(DRIVER_NAME, NULL); -+ - if (!fb->debugfs_dir) { -- pr_warn("%s: could not create debugfs entry\n", -- __func__); -+ dev_warn(fb->fb.dev, "%s: could not create debugfs folder\n", -+ __func__); -+ return -EFAULT; -+ } -+ -+ snprintf(buf, sizeof(buf), "%u", fb->display_settings.display_num); -+ -+ fb->debugfs_subdir = debugfs_create_dir(buf, fb->debugfs_dir); -+ -+ if (!fb->debugfs_subdir) { -+ dev_warn(fb->fb.dev, "%s: could not create debugfs entry %u\n", -+ __func__, fb->display_settings.display_num); - return -EFAULT; - } - -- fb->stats.regset.regs = stats_registers; -- fb->stats.regset.nregs = ARRAY_SIZE(stats_registers); -- fb->stats.regset.base = &fb->stats; -- -- if (!debugfs_create_regset32("stats", 0444, fb->debugfs_dir, -- &fb->stats.regset)) { -- pr_warn("%s: could not create statistics registers\n", -- __func__); -+ fbdev->dma_stats.regset.regs = stats_registers; -+ fbdev->dma_stats.regset.nregs = ARRAY_SIZE(stats_registers); -+ fbdev->dma_stats.regset.base = &fbdev->dma_stats; -+ -+ if (!debugfs_create_regset32("dma_stats", 0444, fb->debugfs_subdir, -+ &fbdev->dma_stats.regset)) { -+ dev_warn(fb->fb.dev, "%s: could not create statistics registers\n", -+ __func__); -+ goto fail; -+ } -+ -+ fb->screeninfo_regset.regs = screeninfo; -+ fb->screeninfo_regset.nregs = ARRAY_SIZE(screeninfo); -+ fb->screeninfo_regset.base = &fb->fb.var; -+ -+ if (!debugfs_create_regset32("screeninfo", 0444, fb->debugfs_subdir, -+ &fb->screeninfo_regset)) { -+ dev_warn(fb->fb.dev, -+ "%s: could not create dimensions registers\n", -+ __func__); - goto fail; - } -+ -+ fbdev->instance_count++; -+ - return 0; - - fail: -@@ -145,6 +225,20 @@ fail: - return -EFAULT; - } - -+static void set_display_num(struct bcm2708_fb *fb) -+{ -+ if (fb && fb->fbdev && fb->fbdev->firmware_supports_multifb) { -+ u32 tmp = fb->display_settings.display_num; -+ -+ if (rpi_firmware_property(fb->fbdev->fw, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, -+ &tmp, -+ sizeof(tmp))) -+ dev_warn_once(fb->fb.dev, -+ "Set display number call failed. Old GPU firmware?"); -+ } -+} -+ - static int bcm2708_fb_set_bitfields(struct fb_var_screeninfo *var) - { - int ret = 0; -@@ -222,11 +316,11 @@ static int bcm2708_fb_check_var(struct f - struct fb_info *info) - { - /* info input, var output */ -- print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", -+ print_debug("%s(%p) %ux%u (%ux%u), %ul, %u\n", - __func__, info, info->var.xres, info->var.yres, - info->var.xres_virtual, info->var.yres_virtual, -- (int)info->screen_size, info->var.bits_per_pixel); -- print_debug("%s(%p) %dx%d (%dx%d), %d\n", __func__, var, var->xres, -+ info->screen_size, info->var.bits_per_pixel); -+ print_debug("%s(%p) %ux%u (%ux%u), %u\n", __func__, var, var->xres, - var->yres, var->xres_virtual, var->yres_virtual, - var->bits_per_pixel); - -@@ -283,23 +377,96 @@ static int bcm2708_fb_set_par(struct fb_ - .xoffset = info->var.xoffset, - .yoffset = info->var.yoffset, - .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, -- .base = 0, -- .screen_size = 0, -- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, -- .pitch = 0, -+ /* base and screen_size will be initialised later */ -+ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, -+ /* pitch will be initialised later */ - }; -- int ret; -+ int ret, image_size; -+ - -- print_debug("%s(%p) %dx%d (%dx%d), %d, %d\n", __func__, info, -+ print_debug("%s(%p) %dx%d (%dx%d), %d, %d (display %d)\n", __func__, -+ info, - info->var.xres, info->var.yres, info->var.xres_virtual, - info->var.yres_virtual, (int)info->screen_size, -- info->var.bits_per_pixel); -+ info->var.bits_per_pixel, value); -+ -+ /* Need to set the display number to act on first -+ * Cannot do it in the tag list because on older firmware the call -+ * will fail and stop the rest of the list being executed. -+ * We can ignore this call failing as the default at other end is 0 -+ */ -+ set_display_num(fb); -+ -+ /* Try allocating our own buffer. We can specify all the parameters */ -+ image_size = ((info->var.xres * info->var.yres) * -+ info->var.bits_per_pixel) >> 3; -+ -+ if (!fb->fbdev->disable_arm_alloc && -+ (image_size != fb->image_size || !fb->dma_addr)) { -+ if (fb->dma_addr) { -+ dma_free_coherent(info->device, fb->image_size, -+ fb->cpuaddr, fb->dma_addr); -+ fb->image_size = 0; -+ fb->cpuaddr = NULL; -+ fb->dma_addr = 0; -+ } -+ -+ fb->cpuaddr = dma_alloc_coherent(info->device, image_size, -+ &fb->dma_addr, GFP_KERNEL); -+ -+ if (!fb->cpuaddr) { -+ fb->dma_addr = 0; -+ fb->fbdev->disable_arm_alloc = true; -+ } else { -+ fb->image_size = image_size; -+ } -+ } -+ -+ if (fb->cpuaddr) { -+ fbinfo.base = fb->dma_addr; -+ fbinfo.screen_size = image_size; -+ fbinfo.pitch = (info->var.xres * info->var.bits_per_pixel) >> 3; -+ -+ ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, -+ sizeof(fbinfo)); -+ if (ret || fbinfo.base != fb->dma_addr) { -+ /* Firmware either failed, or assigned a different base -+ * address (ie it doesn't support being passed an FB -+ * allocation). -+ * Destroy the allocation, and don't try again. -+ */ -+ dma_free_coherent(info->device, fb->image_size, -+ fb->cpuaddr, fb->dma_addr); -+ fb->image_size = 0; -+ fb->cpuaddr = NULL; -+ fb->dma_addr = 0; -+ fb->fbdev->disable_arm_alloc = true; -+ } -+ } else { -+ /* Our allocation failed - drop into the old scheme of -+ * allocation by the VPU. -+ */ -+ ret = -ENOMEM; -+ } - -- ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); - if (ret) { -- dev_err(info->device, -- "Failed to allocate GPU framebuffer (%d)\n", ret); -- return ret; -+ /* Old scheme: -+ * - FRAMEBUFFER_ALLOCATE passes 0 for base and screen_size. -+ * - GET_PITCH instead of SET_PITCH. -+ */ -+ fbinfo.base = 0; -+ fbinfo.screen_size = 0; -+ fbinfo.tag6.tag = RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH; -+ fbinfo.pitch = 0; -+ -+ ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, -+ sizeof(fbinfo)); -+ if (ret) { -+ dev_err(info->device, -+ "Failed to allocate GPU framebuffer (%d)\n", -+ ret); -+ return ret; -+ } - } - - if (info->var.bits_per_pixel <= 8) -@@ -314,9 +481,17 @@ static int bcm2708_fb_set_par(struct fb_ - fb->fb.fix.smem_start = fbinfo.base; - fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; - fb->fb.screen_size = fbinfo.screen_size; -- if (fb->fb.screen_base) -- iounmap(fb->fb.screen_base); -- fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); -+ -+ if (!fb->dma_addr) { -+ if (fb->fb.screen_base) -+ iounmap(fb->fb.screen_base); -+ -+ fb->fb.screen_base = ioremap_wc(fbinfo.base, -+ fb->fb.screen_size); -+ } else { -+ fb->fb.screen_base = fb->cpuaddr; -+ } -+ - if (!fb->fb.screen_base) { - /* the console may currently be locked */ - console_trylock(); -@@ -374,7 +549,10 @@ static int bcm2708_fb_setcolreg(unsigned - packet->length = regno + 1; - memcpy(packet->cmap, fb->gpu_cmap, - sizeof(packet->cmap)); -- ret = rpi_firmware_property(fb->fw, -+ -+ set_display_num(fb); -+ -+ ret = rpi_firmware_property(fb->fbdev->fw, - RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE, - packet, - (2 + packet->length) * sizeof(u32)); -@@ -413,8 +591,11 @@ static int bcm2708_fb_blank(int blank_mo - return -EINVAL; - } - -- ret = rpi_firmware_property(fb->fw, RPI_FIRMWARE_FRAMEBUFFER_BLANK, -+ set_display_num(fb); -+ -+ ret = rpi_firmware_property(fb->fbdev->fw, RPI_FIRMWARE_FRAMEBUFFER_BLANK, - &value, sizeof(value)); -+ - if (ret) - dev_err(info->device, "%s(%d) failed: %d\n", __func__, - blank_mode, ret); -@@ -431,7 +612,7 @@ static int bcm2708_fb_pan_display(struct - info->var.yoffset = var->yoffset; - result = bcm2708_fb_set_par(info); - if (result != 0) -- pr_err("%s(%d,%d) returns=%d\n", __func__, var->xoffset, -+ pr_err("%s(%u,%u) returns=%d\n", __func__, var->xoffset, - var->yoffset, result); - return result; - } -@@ -439,8 +620,9 @@ static int bcm2708_fb_pan_display(struct - static void dma_memcpy(struct bcm2708_fb *fb, dma_addr_t dst, dma_addr_t src, - int size) - { -- int burst_size = (fb->dma_chan == 0) ? 8 : 2; -- struct bcm2708_dma_cb *cb = fb->cb_base; -+ struct bcm2708_fb_dev *fbdev = fb->fbdev; -+ struct bcm2708_dma_cb *cb = fbdev->cb_base; -+ int burst_size = (fbdev->dma_chan == 0) ? 8 : 2; - - cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | - BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | -@@ -453,21 +635,27 @@ static void dma_memcpy(struct bcm2708_fb - cb->pad[1] = 0; - cb->next = 0; - -+ // Not sure what to do if this gets a signal whilst waiting -+ if (mutex_lock_interruptible(&fbdev->dma_mutex)) -+ return; -+ - if (size < dma_busy_wait_threshold) { -- bcm_dma_start(fb->dma_chan_base, fb->cb_handle); -- bcm_dma_wait_idle(fb->dma_chan_base); -+ bcm_dma_start(fbdev->dma_chan_base, fbdev->cb_handle); -+ bcm_dma_wait_idle(fbdev->dma_chan_base); - } else { -- void __iomem *dma_chan = fb->dma_chan_base; -+ void __iomem *local_dma_chan = fbdev->dma_chan_base; - - cb->info |= BCM2708_DMA_INT_EN; -- bcm_dma_start(fb->dma_chan_base, fb->cb_handle); -- while (bcm_dma_is_busy(dma_chan)) { -- wait_event_interruptible(fb->dma_waitq, -- !bcm_dma_is_busy(dma_chan)); -+ bcm_dma_start(fbdev->dma_chan_base, fbdev->cb_handle); -+ while (bcm_dma_is_busy(local_dma_chan)) { -+ wait_event_interruptible(fbdev->dma_waitq, -+ !bcm_dma_is_busy(local_dma_chan)); - } -- fb->stats.dma_irqs++; -+ fbdev->dma_stats.dma_irqs++; - } -- fb->stats.dma_copies++; -+ fbdev->dma_stats.dma_copies++; -+ -+ mutex_unlock(&fbdev->dma_mutex); - } - - /* address with no aliases */ -@@ -542,10 +730,13 @@ static int bcm2708_ioctl(struct fb_info - - switch (cmd) { - case FBIO_WAITFORVSYNC: -- ret = rpi_firmware_property(fb->fw, -+ set_display_num(fb); -+ -+ ret = rpi_firmware_property(fb->fbdev->fw, - RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC, - &dummy, sizeof(dummy)); - break; -+ - case FBIODMACOPY: - { - struct fb_dmacopy ioparam; -@@ -615,23 +806,22 @@ static int bcm2708_compat_ioctl(struct f - static void bcm2708_fb_fillrect(struct fb_info *info, - const struct fb_fillrect *rect) - { -- /* (is called) print_debug("bcm2708_fb_fillrect\n"); */ - cfb_fillrect(info, rect); - } - - /* A helper function for configuring dma control block */ - static void set_dma_cb(struct bcm2708_dma_cb *cb, -- int burst_size, -- dma_addr_t dst, -- int dst_stride, -- dma_addr_t src, -- int src_stride, -- int w, -- int h) -+ int burst_size, -+ dma_addr_t dst, -+ int dst_stride, -+ dma_addr_t src, -+ int src_stride, -+ int w, -+ int h) - { - cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | -- BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | -- BCM2708_DMA_D_INC | BCM2708_DMA_TDMODE; -+ BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | -+ BCM2708_DMA_D_INC | BCM2708_DMA_TDMODE; - cb->dst = dst; - cb->src = src; - /* -@@ -649,15 +839,19 @@ static void bcm2708_fb_copyarea(struct f - const struct fb_copyarea *region) - { - struct bcm2708_fb *fb = to_bcm2708(info); -- struct bcm2708_dma_cb *cb = fb->cb_base; -+ struct bcm2708_fb_dev *fbdev = fb->fbdev; -+ struct bcm2708_dma_cb *cb = fbdev->cb_base; - int bytes_per_pixel = (info->var.bits_per_pixel + 7) >> 3; - - /* Channel 0 supports larger bursts and is a bit faster */ -- int burst_size = (fb->dma_chan == 0) ? 8 : 2; -+ int burst_size = (fbdev->dma_chan == 0) ? 8 : 2; - int pixels = region->width * region->height; - -- /* Fallback to cfb_copyarea() if we don't like something */ -- if (bytes_per_pixel > 4 || -+ /* If DMA is currently in use (ie being used on another FB), then -+ * rather than wait for it to finish, just use the cfb_copyarea -+ */ -+ if (!mutex_trylock(&fbdev->dma_mutex) || -+ bytes_per_pixel > 4 || - info->var.xres * info->var.yres > 1920 * 1200 || - region->width <= 0 || region->width > info->var.xres || - region->height <= 0 || region->height > info->var.yres || -@@ -684,8 +878,8 @@ static void bcm2708_fb_copyarea(struct f - * 1920x1200 resolution at 32bpp pixel depth. - */ - int y; -- dma_addr_t control_block_pa = fb->cb_handle; -- dma_addr_t scratchbuf = fb->cb_handle + 16 * 1024; -+ dma_addr_t control_block_pa = fbdev->cb_handle; -+ dma_addr_t scratchbuf = fbdev->cb_handle + 16 * 1024; - int scanline_size = bytes_per_pixel * region->width; - int scanlines_per_cb = (64 * 1024 - 16 * 1024) / scanline_size; - -@@ -735,10 +929,10 @@ static void bcm2708_fb_copyarea(struct f - } - set_dma_cb(cb, burst_size, - fb->fb_bus_address + dy * fb->fb.fix.line_length + -- bytes_per_pixel * region->dx, -+ bytes_per_pixel * region->dx, - stride, - fb->fb_bus_address + sy * fb->fb.fix.line_length + -- bytes_per_pixel * region->sx, -+ bytes_per_pixel * region->sx, - stride, - region->width * bytes_per_pixel, - region->height); -@@ -748,32 +942,33 @@ static void bcm2708_fb_copyarea(struct f - cb->next = 0; - - if (pixels < dma_busy_wait_threshold) { -- bcm_dma_start(fb->dma_chan_base, fb->cb_handle); -- bcm_dma_wait_idle(fb->dma_chan_base); -+ bcm_dma_start(fbdev->dma_chan_base, fbdev->cb_handle); -+ bcm_dma_wait_idle(fbdev->dma_chan_base); - } else { -- void __iomem *dma_chan = fb->dma_chan_base; -+ void __iomem *local_dma_chan = fbdev->dma_chan_base; - - cb->info |= BCM2708_DMA_INT_EN; -- bcm_dma_start(fb->dma_chan_base, fb->cb_handle); -- while (bcm_dma_is_busy(dma_chan)) { -- wait_event_interruptible(fb->dma_waitq, -- !bcm_dma_is_busy(dma_chan)); -+ bcm_dma_start(fbdev->dma_chan_base, fbdev->cb_handle); -+ while (bcm_dma_is_busy(local_dma_chan)) { -+ wait_event_interruptible(fbdev->dma_waitq, -+ !bcm_dma_is_busy(local_dma_chan)); - } -- fb->stats.dma_irqs++; -+ fbdev->dma_stats.dma_irqs++; - } -- fb->stats.dma_copies++; -+ fbdev->dma_stats.dma_copies++; -+ -+ mutex_unlock(&fbdev->dma_mutex); - } - - static void bcm2708_fb_imageblit(struct fb_info *info, - const struct fb_image *image) - { -- /* (is called) print_debug("bcm2708_fb_imageblit\n"); */ - cfb_imageblit(info, image); - } - - static irqreturn_t bcm2708_fb_dma_irq(int irq, void *cxt) - { -- struct bcm2708_fb *fb = cxt; -+ struct bcm2708_fb_dev *fbdev = cxt; - - /* FIXME: should read status register to check if this is - * actually interrupting us or not, in case this interrupt -@@ -783,9 +978,9 @@ static irqreturn_t bcm2708_fb_dma_irq(in - */ - - /* acknowledge the interrupt */ -- writel(BCM2708_DMA_INT, fb->dma_chan_base + BCM2708_DMA_CS); -+ writel(BCM2708_DMA_INT, fbdev->dma_chan_base + BCM2708_DMA_CS); - -- wake_up(&fb->dma_waitq); -+ wake_up(&fbdev->dma_waitq); - return IRQ_HANDLED; - } - -@@ -821,11 +1016,23 @@ static int bcm2708_fb_register(struct bc - fb->fb.fix.ywrapstep = 0; - fb->fb.fix.accel = FB_ACCEL_NONE; - -- fb->fb.var.xres = fbwidth; -- fb->fb.var.yres = fbheight; -- fb->fb.var.xres_virtual = fbwidth; -- fb->fb.var.yres_virtual = fbheight; -- fb->fb.var.bits_per_pixel = fbdepth; -+ /* If we have data from the VC4 on FB's, use that, otherwise use the -+ * module parameters -+ */ -+ if (fb->display_settings.width) { -+ fb->fb.var.xres = fb->display_settings.width; -+ fb->fb.var.yres = fb->display_settings.height; -+ fb->fb.var.xres_virtual = fb->fb.var.xres; -+ fb->fb.var.yres_virtual = fb->fb.var.yres; -+ fb->fb.var.bits_per_pixel = fb->display_settings.depth; -+ } else { -+ fb->fb.var.xres = fbwidth; -+ fb->fb.var.yres = fbheight; -+ fb->fb.var.xres_virtual = fbwidth; -+ fb->fb.var.yres_virtual = fbheight; -+ fb->fb.var.bits_per_pixel = fbdepth; -+ } -+ - fb->fb.var.vmode = FB_VMODE_NONINTERLACED; - fb->fb.var.activate = FB_ACTIVATE_NOW; - fb->fb.var.nonstd = 0; -@@ -841,26 +1048,23 @@ static int bcm2708_fb_register(struct bc - fb->fb.monspecs.dclkmax = 100000000; - - bcm2708_fb_set_bitfields(&fb->fb.var); -- init_waitqueue_head(&fb->dma_waitq); - - /* - * Allocate colourmap. - */ -- - fb_set_var(&fb->fb, &fb->fb.var); -+ - ret = bcm2708_fb_set_par(&fb->fb); -+ - if (ret) - return ret; - -- print_debug("BCM2708FB: registering framebuffer (%dx%d@%d) (%d)\n", -- fbwidth, fbheight, fbdepth, fbswap); -- - ret = register_framebuffer(&fb->fb); -- print_debug("BCM2708FB: register framebuffer (%d)\n", ret); -+ - if (ret == 0) - goto out; - -- print_debug("BCM2708FB: cannot register framebuffer (%d)\n", ret); -+ dev_warn(fb->fb.dev, "Unable to register framebuffer (%d)\n", ret); - out: - return ret; - } -@@ -869,10 +1073,18 @@ static int bcm2708_fb_probe(struct platf - { - struct device_node *fw_np; - struct rpi_firmware *fw; -- struct bcm2708_fb *fb; -- int ret; -+ int ret, i; -+ u32 num_displays; -+ struct bcm2708_fb_dev *fbdev; -+ struct { u32 base, length; } gpu_mem; -+ -+ fbdev = devm_kzalloc(&dev->dev, sizeof(*fbdev), GFP_KERNEL); -+ -+ if (!fbdev) -+ return -ENOMEM; - - fw_np = of_parse_phandle(dev->dev.of_node, "firmware", 0); -+ - /* Remove comment when booting without Device Tree is no longer supported - * if (!fw_np) { - * dev_err(&dev->dev, "Missing firmware node\n"); -@@ -880,90 +1092,154 @@ static int bcm2708_fb_probe(struct platf - * } - */ - fw = rpi_firmware_get(fw_np); -+ fbdev->fw = fw; -+ - if (!fw) - return -EPROBE_DEFER; - -- fb = kzalloc(sizeof(*fb), GFP_KERNEL); -- if (!fb) { -- ret = -ENOMEM; -- goto free_region; -+ ret = rpi_firmware_property(fw, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS, -+ &num_displays, sizeof(u32)); -+ -+ /* If we fail to get the number of displays, or it returns 0, then -+ * assume old firmware that doesn't have the mailbox call, so just -+ * set one display -+ */ -+ if (ret || num_displays == 0) { -+ num_displays = 1; -+ dev_err(&dev->dev, -+ "Unable to determine number of FB's. Assuming 1\n"); -+ ret = 0; -+ } else { -+ fbdev->firmware_supports_multifb = 1; - } - -- fb->fw = fw; -- bcm2708_fb_debugfs_init(fb); -+ if (num_displays > MAX_FRAMEBUFFERS) { -+ dev_warn(&dev->dev, -+ "More displays reported from firmware than supported in driver (%u vs %u)", -+ num_displays, MAX_FRAMEBUFFERS); -+ num_displays = MAX_FRAMEBUFFERS; -+ } - -- fb->cb_base = dma_alloc_writecombine(&dev->dev, SZ_64K, -- &fb->cb_handle, GFP_KERNEL); -- if (!fb->cb_base) { -+ dev_info(&dev->dev, "FB found %d display(s)\n", num_displays); -+ -+ /* Set up the DMA information. Note we have just one set of DMA -+ * parameters to work with all the FB's so requires synchronising when -+ * being used -+ */ -+ -+ mutex_init(&fbdev->dma_mutex); -+ -+ fbdev->cb_base = dma_alloc_writecombine(&dev->dev, SZ_64K, -+ &fbdev->cb_handle, -+ GFP_KERNEL); -+ if (!fbdev->cb_base) { - dev_err(&dev->dev, "cannot allocate DMA CBs\n"); - ret = -ENOMEM; - goto free_fb; - } - -- pr_info("BCM2708FB: allocated DMA memory %pad\n", &fb->cb_handle); -- - ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_BULK, -- &fb->dma_chan_base, &fb->dma_irq); -+ &fbdev->dma_chan_base, -+ &fbdev->dma_irq); - if (ret < 0) { -- dev_err(&dev->dev, "couldn't allocate a DMA channel\n"); -+ dev_err(&dev->dev, "Couldn't allocate a DMA channel\n"); - goto free_cb; - } -- fb->dma_chan = ret; -+ fbdev->dma_chan = ret; - -- ret = request_irq(fb->dma_irq, bcm2708_fb_dma_irq, -- 0, "bcm2708_fb dma", fb); -+ ret = request_irq(fbdev->dma_irq, bcm2708_fb_dma_irq, -+ 0, "bcm2708_fb DMA", fbdev); - if (ret) { -- pr_err("%s: failed to request DMA irq\n", __func__); -+ dev_err(&dev->dev, -+ "Failed to request DMA irq\n"); - goto free_dma_chan; - } - -- pr_info("BCM2708FB: allocated DMA channel %d\n", fb->dma_chan); -+ rpi_firmware_property(fbdev->fw, -+ RPI_FIRMWARE_GET_VC_MEMORY, -+ &gpu_mem, sizeof(gpu_mem)); -+ -+ for (i = 0; i < num_displays; i++) { -+ struct bcm2708_fb *fb = &fbdev->displays[i]; -+ -+ fb->display_settings.display_num = i; -+ fb->dev = dev; -+ fb->fb.device = &dev->dev; -+ fb->fbdev = fbdev; -+ -+ fb->gpu.base = gpu_mem.base; -+ fb->gpu.length = gpu_mem.length; -+ -+ if (fbdev->firmware_supports_multifb) { -+ ret = rpi_firmware_property(fw, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_SETTINGS, -+ &fb->display_settings, -+ GET_DISPLAY_SETTINGS_PAYLOAD_SIZE); -+ } else { -+ memset(&fb->display_settings, 0, -+ sizeof(fb->display_settings)); -+ } -+ -+ ret = bcm2708_fb_register(fb); - -- fb->dev = dev; -- fb->fb.device = &dev->dev; -+ if (ret == 0) { -+ bcm2708_fb_debugfs_init(fb); - -- /* failure here isn't fatal, but we'll fail in vc_mem_copy if -- * fb->gpu is not valid -- */ -- rpi_firmware_property(fb->fw, RPI_FIRMWARE_GET_VC_MEMORY, &fb->gpu, -- sizeof(fb->gpu)); -+ fbdev->num_displays++; - -- ret = bcm2708_fb_register(fb); -- if (ret == 0) { -- platform_set_drvdata(dev, fb); -- goto out; -+ dev_info(&dev->dev, -+ "Registered framebuffer for display %u, size %ux%u\n", -+ fb->display_settings.display_num, -+ fb->fb.var.xres, -+ fb->fb.var.yres); -+ } else { -+ // Use this to flag if this FB entry is in use. -+ fb->fbdev = NULL; -+ } -+ } -+ -+ // Did we actually successfully create any FB's? -+ if (fbdev->num_displays) { -+ init_waitqueue_head(&fbdev->dma_waitq); -+ platform_set_drvdata(dev, fbdev); -+ return ret; - } - - free_dma_chan: -- bcm_dma_chan_free(fb->dma_chan); -+ bcm_dma_chan_free(fbdev->dma_chan); - free_cb: -- dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); -+ dma_free_writecombine(&dev->dev, SZ_64K, fbdev->cb_base, -+ fbdev->cb_handle); - free_fb: -- kfree(fb); --free_region: - dev_err(&dev->dev, "probe failed, err %d\n", ret); --out: -+ - return ret; - } - - static int bcm2708_fb_remove(struct platform_device *dev) - { -- struct bcm2708_fb *fb = platform_get_drvdata(dev); -+ struct bcm2708_fb_dev *fbdev = platform_get_drvdata(dev); -+ int i; - - platform_set_drvdata(dev, NULL); - -- if (fb->fb.screen_base) -- iounmap(fb->fb.screen_base); -- unregister_framebuffer(&fb->fb); -- -- dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); -- bcm_dma_chan_free(fb->dma_chan); -- -- bcm2708_fb_debugfs_deinit(fb); -+ for (i = 0; i < fbdev->num_displays; i++) { -+ if (fbdev->displays[i].fb.screen_base) -+ iounmap(fbdev->displays[i].fb.screen_base); -+ -+ if (fbdev->displays[i].fbdev) { -+ unregister_framebuffer(&fbdev->displays[i].fb); -+ bcm2708_fb_debugfs_deinit(&fbdev->displays[i]); -+ } -+ } - -- free_irq(fb->dma_irq, fb); -+ dma_free_writecombine(&dev->dev, SZ_64K, fbdev->cb_base, -+ fbdev->cb_handle); -+ bcm_dma_chan_free(fbdev->dma_chan); -+ free_irq(fbdev->dma_irq, fbdev); - -- kfree(fb); -+ mutex_destroy(&fbdev->dma_mutex); - - return 0; - } -@@ -978,10 +1254,10 @@ static struct platform_driver bcm2708_fb - .probe = bcm2708_fb_probe, - .remove = bcm2708_fb_remove, - .driver = { -- .name = DRIVER_NAME, -- .owner = THIS_MODULE, -- .of_match_table = bcm2708_fb_of_match_table, -- }, -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = bcm2708_fb_of_match_table, -+ }, - }; - - static int __init bcm2708_fb_init(void) ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -138,9 +138,11 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, - RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, - RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, - RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, - RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, - RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, -+ - RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, - RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, - RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, -@@ -159,6 +161,8 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, - }; - -+#define GET_DISPLAY_SETTINGS_PAYLOAD_SIZE 64 -+ - #if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE) - int rpi_firmware_property(struct rpi_firmware *fw, - u32 tag, void *data, size_t len); diff --git a/target/linux/brcm2708/patches-4.19/950-0630-media-videodev2.h-add-new-capabilities-for-buffer-ty.patch b/target/linux/brcm2708/patches-4.19/950-0630-media-videodev2.h-add-new-capabilities-for-buffer-ty.patch new file mode 100644 index 0000000000..8f3e72c447 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0630-media-videodev2.h-add-new-capabilities-for-buffer-ty.patch @@ -0,0 +1,136 @@ +From ebd995296afa99a5c53f164e595f7a6d41d32a01 Mon Sep 17 00:00:00 2001 +From: Hans Verkuil +Date: Thu, 23 Aug 2018 09:56:22 -0400 +Subject: [PATCH] media: videodev2.h: add new capabilities for buffer + types + +Upstream commit f35f5d72e70e6b91389eb98fcabf43b79f40587f + +VIDIOC_REQBUFS and VIDIOC_CREATE_BUFFERS will return capabilities +telling userspace what the given buffer type is capable of. + +Signed-off-by: Hans Verkuil +Reviewed-by: Tomasz Figa +Acked-by: Sakari Ailus +Signed-off-by: Mauro Carvalho Chehab +--- + .../media/uapi/v4l/vidioc-create-bufs.rst | 14 ++++++- + .../media/uapi/v4l/vidioc-reqbufs.rst | 42 ++++++++++++++++++- + include/uapi/linux/videodev2.h | 13 +++++- + 3 files changed, 65 insertions(+), 4 deletions(-) + +--- a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst ++++ b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst +@@ -102,7 +102,19 @@ than the number requested. + - ``format`` + - Filled in by the application, preserved by the driver. + * - __u32 +- - ``reserved``\ [8] ++ - ``capabilities`` ++ - Set by the driver. If 0, then the driver doesn't support ++ capabilities. In that case all you know is that the driver is ++ guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support ++ other :c:type:`v4l2_memory` types. It will not support any others ++ capabilities. See :ref:`here ` for a list of the ++ capabilities. ++ ++ If you want to just query the capabilities without making any ++ other changes, then set ``count`` to 0, ``memory`` to ++ ``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type. ++ * - __u32 ++ - ``reserved``\ [7] + - A place holder for future extensions. Drivers and applications + must set the array to zero. + +--- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst ++++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst +@@ -88,10 +88,50 @@ any DMA in progress, an implicit + ``V4L2_MEMORY_DMABUF`` or ``V4L2_MEMORY_USERPTR``. See + :c:type:`v4l2_memory`. + * - __u32 +- - ``reserved``\ [2] ++ - ``capabilities`` ++ - Set by the driver. If 0, then the driver doesn't support ++ capabilities. In that case all you know is that the driver is ++ guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support ++ other :c:type:`v4l2_memory` types. It will not support any others ++ capabilities. ++ ++ If you want to query the capabilities with a minimum of side-effects, ++ then this can be called with ``count`` set to 0, ``memory`` set to ++ ``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will ++ free any previously allocated buffers, so this is typically something ++ that will be done at the start of the application. ++ * - __u32 ++ - ``reserved``\ [1] + - A place holder for future extensions. Drivers and applications + must set the array to zero. + ++.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}| ++ ++.. _v4l2-buf-capabilities: ++.. _V4L2-BUF-CAP-SUPPORTS-MMAP: ++.. _V4L2-BUF-CAP-SUPPORTS-USERPTR: ++.. _V4L2-BUF-CAP-SUPPORTS-DMABUF: ++.. _V4L2-BUF-CAP-SUPPORTS-REQUESTS: ++ ++.. cssclass:: longtable ++ ++.. flat-table:: V4L2 Buffer Capabilities Flags ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 3 1 4 ++ ++ * - ``V4L2_BUF_CAP_SUPPORTS_MMAP`` ++ - 0x00000001 ++ - This buffer type supports the ``V4L2_MEMORY_MMAP`` streaming mode. ++ * - ``V4L2_BUF_CAP_SUPPORTS_USERPTR`` ++ - 0x00000002 ++ - This buffer type supports the ``V4L2_MEMORY_USERPTR`` streaming mode. ++ * - ``V4L2_BUF_CAP_SUPPORTS_DMABUF`` ++ - 0x00000004 ++ - This buffer type supports the ``V4L2_MEMORY_DMABUF`` streaming mode. ++ * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS`` ++ - 0x00000008 ++ - This buffer type supports :ref:`requests `. + + Return Value + ============ +--- a/include/uapi/linux/videodev2.h ++++ b/include/uapi/linux/videodev2.h +@@ -872,9 +872,16 @@ struct v4l2_requestbuffers { + __u32 count; + __u32 type; /* enum v4l2_buf_type */ + __u32 memory; /* enum v4l2_memory */ +- __u32 reserved[2]; ++ __u32 capabilities; ++ __u32 reserved[1]; + }; + ++/* capabilities for struct v4l2_requestbuffers and v4l2_create_buffers */ ++#define V4L2_BUF_CAP_SUPPORTS_MMAP (1 << 0) ++#define V4L2_BUF_CAP_SUPPORTS_USERPTR (1 << 1) ++#define V4L2_BUF_CAP_SUPPORTS_DMABUF (1 << 2) ++#define V4L2_BUF_CAP_SUPPORTS_REQUESTS (1 << 3) ++ + /** + * struct v4l2_plane - plane info for multi-planar buffers + * @bytesused: number of bytes occupied by data in the plane (payload) +@@ -2318,6 +2325,7 @@ struct v4l2_dbg_chip_info { + * return: number of created buffers + * @memory: enum v4l2_memory; buffer memory type + * @format: frame format, for which buffers are requested ++ * @capabilities: capabilities of this buffer type. + * @reserved: future extensions + */ + struct v4l2_create_buffers { +@@ -2325,7 +2333,8 @@ struct v4l2_create_buffers { + __u32 count; + __u32 memory; + struct v4l2_format format; +- __u32 reserved[8]; ++ __u32 capabilities; ++ __u32 reserved[7]; + }; + + /* diff --git a/target/linux/brcm2708/patches-4.19/950-0631-ARM-dts-bcm283x-Move-BCM2835-6-7-specific-to-bcm2835.patch b/target/linux/brcm2708/patches-4.19/950-0631-ARM-dts-bcm283x-Move-BCM2835-6-7-specific-to-bcm2835.patch deleted file mode 100644 index 6a10e58288..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0631-ARM-dts-bcm283x-Move-BCM2835-6-7-specific-to-bcm2835.patch +++ /dev/null @@ -1,189 +0,0 @@ -From 545c00748a070340e9669740e45afc2672e1fcb6 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sun, 19 May 2019 12:26:21 +0200 -Subject: [PATCH 631/806] ARM: dts: bcm283x: Move BCM2835/6/7 specific to - bcm2835-common.dtsi - -We want all common BCM2835/6/7/8 functions in bcm283x.dtsi and all -BCM2835/6/7 specific in the new bcm2835-common.dtsi. - -Signed-off-by: Stefan Wahren ---- - arch/arm/boot/dts/bcm2835-common.dtsi | 53 +++++++++++++++++++++++++++ - arch/arm/boot/dts/bcm2835.dtsi | 1 + - arch/arm/boot/dts/bcm2836.dtsi | 1 + - arch/arm/boot/dts/bcm2837.dtsi | 1 + - arch/arm/boot/dts/bcm283x.dtsi | 43 +--------------------- - 5 files changed, 57 insertions(+), 42 deletions(-) - create mode 100644 arch/arm/boot/dts/bcm2835-common.dtsi - ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2835-common.dtsi -@@ -0,0 +1,53 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+/* This include file covers the common peripherals and configuration between -+ * bcm2835, bcm2836 and bcm2837 implementations. -+ */ -+ -+/ { -+ soc { -+ timer@7e003000 { -+ compatible = "brcm,bcm2835-system-timer"; -+ reg = <0x7e003000 0x1000>; -+ interrupts = <1 0>, <1 1>, <1 2>, <1 3>; -+ /* This could be a reference to BCM2835_CLOCK_TIMER, -+ * but we don't have the driver using the common clock -+ * support yet. -+ */ -+ clock-frequency = <1000000>; -+ }; -+ -+ intc: interrupt-controller@7e00b200 { -+ compatible = "brcm,bcm2835-armctrl-ic"; -+ reg = <0x7e00b200 0x200>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ }; -+ -+ thermal: thermal@7e212000 { -+ compatible = "brcm,bcm2835-thermal"; -+ reg = <0x7e212000 0x8>; -+ clocks = <&clocks BCM2835_CLOCK_TSENS>; -+ #thermal-sensor-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ v3d: v3d@7ec00000 { -+ compatible = "brcm,bcm2835-v3d"; -+ reg = <0x7ec00000 0x1000>; -+ interrupts = <1 10>; -+ }; -+ }; -+}; -+ -+&gpio { -+ i2c_slave_gpio18: i2c_slave_gpio18 { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = ; -+ }; -+ -+ jtag_gpio4: jtag_gpio4 { -+ brcm,pins = <4 5 6 12 13>; -+ brcm,function = ; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm2835.dtsi -+++ b/arch/arm/boot/dts/bcm2835.dtsi -@@ -1,5 +1,6 @@ - // SPDX-License-Identifier: GPL-2.0 - #include "bcm283x.dtsi" -+#include "bcm2835-common.dtsi" - - / { - compatible = "brcm,bcm2835"; ---- a/arch/arm/boot/dts/bcm2836.dtsi -+++ b/arch/arm/boot/dts/bcm2836.dtsi -@@ -1,5 +1,6 @@ - // SPDX-License-Identifier: GPL-2.0 - #include "bcm283x.dtsi" -+#include "bcm2835-common.dtsi" - - / { - compatible = "brcm,bcm2836"; ---- a/arch/arm/boot/dts/bcm2837.dtsi -+++ b/arch/arm/boot/dts/bcm2837.dtsi -@@ -1,4 +1,5 @@ - #include "bcm283x.dtsi" -+#include "bcm2835-common.dtsi" - - / { - compatible = "brcm,bcm2837"; ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -55,17 +55,6 @@ - #address-cells = <1>; - #size-cells = <1>; - -- timer@7e003000 { -- compatible = "brcm,bcm2835-system-timer"; -- reg = <0x7e003000 0x1000>; -- interrupts = <1 0>, <1 1>, <1 2>, <1 3>; -- /* This could be a reference to BCM2835_CLOCK_TIMER, -- * but we don't have the driver using the common clock -- * support yet. -- */ -- clock-frequency = <1000000>; -- }; -- - txp@7e004000 { - compatible = "brcm,bcm2835-txp"; - reg = <0x7e004000 0x20>; -@@ -113,13 +102,6 @@ - brcm,dma-channel-mask = <0x7f35>; - }; - -- intc: interrupt-controller@7e00b200 { -- compatible = "brcm,bcm2835-armctrl-ic"; -- reg = <0x7e00b200 0x200>; -- interrupt-controller; -- #interrupt-cells = <2>; -- }; -- - watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; -@@ -183,8 +165,7 @@ - interrupt-controller; - #interrupt-cells = <2>; - -- /* Defines pin muxing groups according to -- * BCM2835-ARM-Peripherals.pdf page 102. -+ /* Defines common pin muxing groups - * - * While each pin can have its mux selected - * for various functions individually, some -@@ -262,15 +243,7 @@ - brcm,pins = <44 45>; - brcm,function = ; - }; -- i2c_slave_gpio18: i2c_slave_gpio18 { -- brcm,pins = <18 19 20 21>; -- brcm,function = ; -- }; - -- jtag_gpio4: jtag_gpio4 { -- brcm,pins = <4 5 6 12 13>; -- brcm,function = ; -- }; - jtag_gpio22: jtag_gpio22 { - brcm,pins = <22 23 24 25 26 27>; - brcm,function = ; -@@ -487,14 +460,6 @@ - - }; - -- thermal: thermal@7e212000 { -- compatible = "brcm,bcm2835-thermal"; -- reg = <0x7e212000 0x8>; -- clocks = <&clocks BCM2835_CLOCK_TSENS>; -- #thermal-sensor-cells = <0>; -- status = "disabled"; -- }; -- - aux: aux@7e215000 { - compatible = "brcm,bcm2835-aux"; - #clock-cells = <1>; -@@ -660,12 +625,6 @@ - phy-names = "usb2-phy"; - }; - -- v3d: v3d@7ec00000 { -- compatible = "brcm,bcm2835-v3d"; -- reg = <0x7ec00000 0x1000>; -- interrupts = <1 10>; -- }; -- - vc4: gpu { - compatible = "brcm,bcm2835-vc4"; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0631-media-vb2-set-reqbufs-create_bufs-capabilities.patch b/target/linux/brcm2708/patches-4.19/950-0631-media-vb2-set-reqbufs-create_bufs-capabilities.patch new file mode 100644 index 0000000000..52f999ec14 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0631-media-vb2-set-reqbufs-create_bufs-capabilities.patch @@ -0,0 +1,190 @@ +From 7410e35a4936b89f2e227c52058c11f1574bbfca Mon Sep 17 00:00:00 2001 +From: Hans Verkuil +Date: Thu, 23 Aug 2018 10:18:35 -0400 +Subject: [PATCH] media: vb2: set reqbufs/create_bufs capabilities + +Upstream commit e5079cf11373e4cc98be8b1072aece429eb2d4d2. + +Set the capabilities field of v4l2_requestbuffers and v4l2_create_buffers. + +The various mapping modes were easy, but for signaling the request capability +a new 'supports_requests' bitfield was added to videobuf2-core.h (and set in +vim2m and vivid). Drivers have to set this bitfield for any queue where +requests are supported. + +Signed-off-by: Hans Verkuil +Reviewed-by: Tomasz Figa +Acked-by: Sakari Ailus +Signed-off-by: Mauro Carvalho Chehab + +Minor modifications required on the backport +--- + drivers/media/common/videobuf2/videobuf2-v4l2.c | 17 +++++++++++++++++ + drivers/media/platform/vim2m.c | 1 + + drivers/media/platform/vivid/vivid-core.c | 5 +++++ + drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 4 +++- + drivers/media/v4l2-core/v4l2-ioctl.c | 4 ++-- + include/media/videobuf2-core.h | 2 ++ + 6 files changed, 30 insertions(+), 3 deletions(-) + +--- a/drivers/media/common/videobuf2/videobuf2-v4l2.c ++++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c +@@ -482,10 +482,24 @@ int vb2_querybuf(struct vb2_queue *q, st + } + EXPORT_SYMBOL(vb2_querybuf); + ++static void fill_buf_caps(struct vb2_queue *q, u32 *caps) ++{ ++ *caps = 0; ++ if (q->io_modes & VB2_MMAP) ++ *caps |= V4L2_BUF_CAP_SUPPORTS_MMAP; ++ if (q->io_modes & VB2_USERPTR) ++ *caps |= V4L2_BUF_CAP_SUPPORTS_USERPTR; ++ if (q->io_modes & VB2_DMABUF) ++ *caps |= V4L2_BUF_CAP_SUPPORTS_DMABUF; ++ if (q->supports_requests) ++ *caps |= V4L2_BUF_CAP_SUPPORTS_REQUESTS; ++} ++ + int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) + { + int ret = vb2_verify_memory_type(q, req->memory, req->type); + ++ fill_buf_caps(q, &req->capabilities); + return ret ? ret : vb2_core_reqbufs(q, req->memory, &req->count); + } + EXPORT_SYMBOL_GPL(vb2_reqbufs); +@@ -513,6 +527,7 @@ int vb2_create_bufs(struct vb2_queue *q, + int ret = vb2_verify_memory_type(q, create->memory, f->type); + unsigned i; + ++ fill_buf_caps(q, &create->capabilities); + create->index = q->num_buffers; + if (create->count == 0) + return ret != -EBUSY ? ret : 0; +@@ -713,6 +728,7 @@ int vb2_ioctl_reqbufs(struct file *file, + struct video_device *vdev = video_devdata(file); + int res = vb2_verify_memory_type(vdev->queue, p->memory, p->type); + ++ fill_buf_caps(vdev->queue, &p->capabilities); + if (res) + return res; + if (vb2_queue_is_busy(vdev, file)) +@@ -734,6 +750,7 @@ int vb2_ioctl_create_bufs(struct file *f + p->format.type); + + p->index = vdev->queue->num_buffers; ++ fill_buf_caps(vdev->queue, &p->capabilities); + /* + * If count == 0, then just check if memory and type are valid. + * Any -EBUSY result from vb2_verify_memory_type can be mapped to 0. +--- a/drivers/media/platform/vim2m.c ++++ b/drivers/media/platform/vim2m.c +@@ -840,6 +840,7 @@ static int queue_init(void *priv, struct + src_vq->mem_ops = &vb2_vmalloc_memops; + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + src_vq->lock = &ctx->dev->dev_mutex; ++ src_vq->supports_requests = true; + + ret = vb2_queue_init(src_vq); + if (ret) +--- a/drivers/media/platform/vivid/vivid-core.c ++++ b/drivers/media/platform/vivid/vivid-core.c +@@ -1060,6 +1060,7 @@ static int vivid_create_instance(struct + q->min_buffers_needed = 2; + q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ++ q->supports_requests = true; + + ret = vb2_queue_init(q); + if (ret) +@@ -1080,6 +1081,7 @@ static int vivid_create_instance(struct + q->min_buffers_needed = 2; + q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ++ q->supports_requests = true; + + ret = vb2_queue_init(q); + if (ret) +@@ -1100,6 +1102,7 @@ static int vivid_create_instance(struct + q->min_buffers_needed = 2; + q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ++ q->supports_requests = true; + + ret = vb2_queue_init(q); + if (ret) +@@ -1120,6 +1123,7 @@ static int vivid_create_instance(struct + q->min_buffers_needed = 2; + q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ++ q->supports_requests = true; + + ret = vb2_queue_init(q); + if (ret) +@@ -1139,6 +1143,7 @@ static int vivid_create_instance(struct + q->min_buffers_needed = 8; + q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ++ q->supports_requests = true; + + ret = vb2_queue_init(q); + if (ret) +--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c ++++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +@@ -251,7 +251,8 @@ struct v4l2_create_buffers32 { + __u32 count; + __u32 memory; /* enum v4l2_memory */ + struct v4l2_format32 format; +- __u32 reserved[8]; ++ __u32 capabilities; ++ __u32 reserved[7]; + }; + + static int __bufsize_v4l2_format(struct v4l2_format32 __user *p32, u32 *size) +@@ -411,6 +412,7 @@ static int put_v4l2_create32(struct v4l2 + if (!access_ok(VERIFY_WRITE, p32, sizeof(*p32)) || + copy_in_user(p32, p64, + offsetof(struct v4l2_create_buffers32, format)) || ++ assign_in_user(&p32->capabilities, &p64->capabilities) || + copy_in_user(p32->reserved, p64->reserved, sizeof(p64->reserved))) + return -EFAULT; + return __put_v4l2_format32(&p64->format, &p32->format); +--- a/drivers/media/v4l2-core/v4l2-ioctl.c ++++ b/drivers/media/v4l2-core/v4l2-ioctl.c +@@ -1879,7 +1879,7 @@ static int v4l_reqbufs(const struct v4l2 + if (ret) + return ret; + +- CLEAR_AFTER_FIELD(p, memory); ++ CLEAR_AFTER_FIELD(p, capabilities); + + return ops->vidioc_reqbufs(file, fh, p); + } +@@ -1920,7 +1920,7 @@ static int v4l_create_bufs(const struct + if (ret) + return ret; + +- CLEAR_AFTER_FIELD(create, format); ++ CLEAR_AFTER_FIELD(create, capabilities); + + v4l_sanitize_format(&create->format); + +--- a/include/media/videobuf2-core.h ++++ b/include/media/videobuf2-core.h +@@ -449,6 +449,7 @@ struct vb2_buf_ops { + * @quirk_poll_must_check_waiting_for_buffers: Return %EPOLLERR at poll when QBUF + * has not been called. This is a vb1 idiom that has been adopted + * also by vb2. ++ * @supports_requests: this queue supports the Request API. + * @lock: pointer to a mutex that protects the &struct vb2_queue. The + * driver can set this to a mutex to let the v4l2 core serialize + * the queuing ioctls. If the driver wants to handle locking +@@ -516,6 +517,7 @@ struct vb2_queue { + unsigned fileio_write_immediately:1; + unsigned allow_zero_bytesused:1; + unsigned quirk_poll_must_check_waiting_for_buffers:1; ++ unsigned supports_requests:1; + + struct mutex *lock; + void *owner; diff --git a/target/linux/brcm2708/patches-4.19/950-0632-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch b/target/linux/brcm2708/patches-4.19/950-0632-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch deleted file mode 100644 index 9be01fb6bf..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0632-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch +++ /dev/null @@ -1,1129 +0,0 @@ -From ff78cbcd8d7d656a5f43abd2c744e610b8c6c740 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 29 May 2019 13:54:21 +0100 -Subject: [PATCH 632/806] ARM: dts: Add bcm2711-rpi-4-b.dts and components - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 320 ++++++++++++ - arch/arm/boot/dts/bcm2711.dtsi | 50 ++ - arch/arm/boot/dts/bcm2838.dtsi | 724 ++++++++++++++++++++++++++ - 4 files changed, 1095 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts - create mode 100644 arch/arm/boot/dts/bcm2711.dtsi - create mode 100644 arch/arm/boot/dts/bcm2838.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2708-rpi-zero-w.dtb \ - bcm2709-rpi-2-b.dtb \ - bcm2710-rpi-3-b.dtb \ -+ bcm2711-rpi-4-b.dtb \ - bcm2710-rpi-3-b-plus.dtb \ - bcm2710-rpi-cm3.dtb - ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -0,0 +1,320 @@ -+/dts-v1/; -+ -+#include "bcm2711.dtsi" -+ -+/ { -+ compatible = "raspberrypi,4-model-b", "brcm,bcm2838", "brcm,bcm2837"; -+ model = "Raspberry Pi 4 Model B"; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x0 0x0 0x0>; -+ }; -+ -+ chosen { -+ bootargs = "8250.nr_uarts=1 cma=64M"; -+ }; -+ -+ aliases { -+ serial0 = &uart1; -+ serial1 = &uart0; -+ mmc0 = &emmc2; -+ mmc1 = &mmcnr; -+ mmc2 = &sdhost; -+ /delete-property/ ethernet; -+ /delete-property/ intc; -+ ethernet0 = &genet; -+ }; -+}; -+ -+&soc { -+ virtgpio: virtgpio { -+ compatible = "brcm,bcm2835-virtgpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+}; -+ -+&mmcnr { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&firmware { -+ expgpio: expgpio { -+ compatible = "raspberrypi,firmware-gpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ status = "okay"; -+ }; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins &bt_pins>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+// ============================================= -+// Board specific stuff here -+ -+/ { -+ -+ sd_io_1v8_reg: sd_io_1v8_reg { -+ status = "okay"; -+ compatible = "regulator-gpio"; -+ vin-supply = <&vdd_5v0_reg>; -+ regulator-name = "vdd-sd-io"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-settling-time-us = <5000>; -+ -+ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; -+ states = <1800000 0x1 -+ 3300000 0x0>; -+ }; -+}; -+ -+&sdhost { -+ status = "disabled"; -+}; -+ -+&emmc2 { -+ status = "okay"; -+ broken-cd; -+ vqmmc-supply = <&sd_io_1v8_reg>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 42 0>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "input"; -+ gpios = <&expgpio 2 0>; -+ }; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+&sdhost_gpio48 { -+ brcm,pins = <22 23 24 25 26 27>; -+ brcm,function = ; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = ; -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = ; -+ }; -+ -+ spi3_pins: spi3_pins { -+ brcm,pins = <1 2 3>; -+ brcm,function = ; -+ }; -+ -+ spi3_cs_pins: spi3_cs_pins { -+ brcm,pins = <0 24>; -+ brcm,function = ; -+ }; -+ -+ spi4_pins: spi4_pins { -+ brcm,pins = <5 6 7>; -+ brcm,function = ; -+ }; -+ -+ spi4_cs_pins: spi4_cs_pins { -+ brcm,pins = <4 25>; -+ brcm,function = ; -+ }; -+ -+ spi5_pins: spi5_pins { -+ brcm,pins = <13 14 15>; -+ brcm,function = ; -+ }; -+ -+ spi5_cs_pins: spi5_cs_pins { -+ brcm,pins = <12 26>; -+ brcm,function = ; -+ }; -+ -+ spi6_pins: spi6_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = ; -+ }; -+ -+ spi6_cs_pins: spi6_cs_pins { -+ brcm,pins = <18 27>; -+ brcm,function = ; -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = ; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = ; -+ }; -+ -+ i2c3_pins: i2c3 { -+ brcm,pins = <4 5>; -+ brcm,function = ; -+ }; -+ -+ i2c4_pins: i2c4 { -+ brcm,pins = <8 9>; -+ brcm,function = ; -+ }; -+ -+ i2c5_pins: i2c5 { -+ brcm,pins = <12 13>; -+ brcm,function = ; -+ }; -+ -+ i2c6_pins: i2c6 { -+ brcm,pins = <22 23>; -+ brcm,function = ; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = ; -+ }; -+ -+ sdio_pins: sdio_pins { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,function = ; // alt3 = SD1 -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ bt_pins: bt_pins { -+ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0 -+ // to fool pinctrl -+ brcm,function = <0>; -+ brcm,pull = <2>; -+ }; -+ -+ uart0_pins: uart0_pins { -+ brcm,pins = <32 33>; -+ brcm,function = ; -+ brcm,pull = <0 2>; -+ }; -+ -+ uart1_pins: uart1_pins { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ -+ uart2_pins: uart2_pins { -+ brcm,pins = <0 1>; -+ brcm,function = ; -+ brcm,pull = <0 2>; -+ }; -+ -+ uart3_pins: uart3_pins { -+ brcm,pins = <4 5>; -+ brcm,function = ; -+ brcm,pull = <0 2>; -+ }; -+ -+ uart4_pins: uart4_pins { -+ brcm,pins = <8 9>; -+ brcm,function = ; -+ brcm,pull = <0 2>; -+ }; -+ -+ uart5_pins: uart5_pins { -+ brcm,pins = <12 13>; -+ brcm,function = ; -+ brcm,pull = <0 2>; -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 41>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2711.dtsi -@@ -0,0 +1,50 @@ -+#include "bcm2838.dtsi" -+#include "bcm270x.dtsi" -+#include "bcm2708-rpi.dtsi" -+ -+/ { -+ soc { -+ /delete-node/ mailbox@7e00b840; -+ /delete-node/ v3d@7ec00000; -+ }; -+ -+ __overrides__ { -+ arm_freq; -+ }; -+}; -+ -+&dma { -+ brcm,dma-channel-mask = <0x7ef5>; -+}; -+ -+&txp { -+ interrupts = ; -+}; -+ -+&firmwarekms { -+ interrupts = ; -+}; -+ -+&smi { -+ interrupts = ; -+}; -+ -+&mmc { -+ interrupts = ; -+}; -+ -+&mmcnr { -+ interrupts = ; -+}; -+ -+&usb { -+ reg = <0x7e980000 0x10000>, -+ <0x7e00b200 0x200>; -+ interrupts = , -+ ; -+}; -+ -+&gpio { -+ interrupts = , -+ ; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2838.dtsi -@@ -0,0 +1,724 @@ -+// SPDX-License-Identifier: GPL-2.0 -+#include "bcm283x.dtsi" -+ -+#include -+#include -+ -+/ { -+ compatible = "brcm,bcm2838", "brcm,bcm2837"; -+ -+ interrupt-parent = <&gicv2>; -+ -+ soc { -+ ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, -+ <0x7c000000 0x0 0xfc000000 0x02000000>, -+ <0x40000000 0x0 0xff800000 0x00800000>; -+ /* Emulate a contiguous 30-bit address range for DMA */ -+ dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; -+ -+ /delete-node/ mailbox@7e00b840; -+ /delete-node/ interrupt-controller@7e00f300; -+ -+ local_intc: local_intc@40000000 { -+ compatible = "brcm,bcm2836-l1-intc"; -+ reg = <0x40000000 0x100>; -+ }; -+ -+ gicv2: gic400@40041000 { -+ interrupt-controller; -+ #interrupt-cells = <3>; -+ compatible = "arm,gic-400"; -+ reg = <0x40041000 0x1000>, -+ <0x40042000 0x2000>, -+ <0x40046000 0x2000>, -+ <0x40048000 0x2000>; -+ }; -+ -+ thermal: thermal@7d5d2200 { -+ compatible = "brcm,avs-tmon-bcm2838"; -+ reg = <0x7d5d2200 0x2c>; -+ interrupts = ; -+ interrupt-names = "tmon"; -+ clocks = <&clocks BCM2835_CLOCK_TSENS>; -+ #thermal-sensor-cells = <0>; -+ status = "okay"; -+ }; -+ -+ pm: watchdog@7e100000 { -+ reg = <0x7e100000 0x114>, -+ <0x7e00a000 0x24>, -+ <0x7ec11000 0x20>; -+ }; -+ -+ rng@7e104000 { -+ interrupts = ; -+ }; -+ -+ uart2: serial@7e201400 { -+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; -+ reg = <0x7e201400 0x200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_UART>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ clock-names = "uartclk", "apb_pclk"; -+ arm,primecell-periphid = <0x00241011>; -+ status = "disabled"; -+ }; -+ -+ uart3: serial@7e201600 { -+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; -+ reg = <0x7e201600 0x200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_UART>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ clock-names = "uartclk", "apb_pclk"; -+ arm,primecell-periphid = <0x00241011>; -+ status = "disabled"; -+ }; -+ -+ uart4: serial@7e201800 { -+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; -+ reg = <0x7e201800 0x200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_UART>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ clock-names = "uartclk", "apb_pclk"; -+ arm,primecell-periphid = <0x00241011>; -+ status = "disabled"; -+ }; -+ -+ uart5: serial@7e201a00 { -+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; -+ reg = <0x7e201a00 0x200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_UART>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ clock-names = "uartclk", "apb_pclk"; -+ arm,primecell-periphid = <0x00241011>; -+ status = "disabled"; -+ }; -+ -+ spi@7e204000 { -+ reg = <0x7e204000 0x0200>; -+ interrupts = ; -+ }; -+ -+ spi3: spi@7e204600 { -+ compatible = "brcm,bcm2835-spi"; -+ reg = <0x7e204600 0x0200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ spi4: spi@7e204800 { -+ compatible = "brcm,bcm2835-spi"; -+ reg = <0x7e204800 0x0200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ spi5: spi@7e204a00 { -+ compatible = "brcm,bcm2835-spi"; -+ reg = <0x7e204a00 0x0200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ spi6: spi@7e204c00 { -+ compatible = "brcm,bcm2835-spi"; -+ reg = <0x7e204c00 0x0200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ i2c3: i2c@7e205600 { -+ compatible = "brcm,bcm2835-i2c"; -+ reg = <0x7e205600 0x200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ i2c4: i2c@7e205800 { -+ compatible = "brcm,bcm2835-i2c"; -+ reg = <0x7e205800 0x200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ i2c5: i2c@7e205a00 { -+ compatible = "brcm,bcm2835-i2c"; -+ reg = <0x7e205a00 0x200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ i2c6: i2c@7e205c00 { -+ compatible = "brcm,bcm2835-i2c"; -+ reg = <0x7e205c00 0x200>; -+ interrupts = ; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ pixelvalve@7e206000 { -+ interrupts = ; -+ }; -+ -+ pixelvalve@7e207000 { -+ interrupts = ; -+ }; -+ -+ emmc2: emmc2@7e340000 { -+ compatible = "brcm,bcm2711-emmc2"; -+ status = "okay"; -+ interrupts = ; -+ clocks = <&clocks BCM2838_CLOCK_EMMC2>; -+ reg = <0x7e340000 0x100>; -+ }; -+ -+ hvs@7e400000 { -+ interrupts = ; -+ }; -+ -+ pixelvalve@7e807000 { -+ interrupts = ; -+ }; -+ }; -+ -+ arm-pmu { -+ /* -+ * N.B. the A72 PMU support only exists in arch/arm64, hence -+ * the fallback to the A53 version. -+ */ -+ compatible = "arm,cortex-a72-pmu", "arm,cortex-a53-pmu"; -+ interrupts = , -+ , -+ , -+ ; -+ }; -+ -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupts = , -+ , -+ , -+ ; -+ arm,cpu-registers-not-fw-configured; -+ always-on; -+ }; -+ -+ cpus: cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit -+ -+ cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <0>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000d8>; -+ }; -+ -+ cpu1: cpu@1 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <1>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000e0>; -+ }; -+ -+ cpu2: cpu@2 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <2>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000e8>; -+ }; -+ -+ cpu3: cpu@3 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <3>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000f0>; -+ }; -+ }; -+ -+ v3dbus { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x7c500000 0x0 0xfc500000 0x03300000>, -+ <0x40000000 0x0 0xff800000 0x00800000>; -+ dma-ranges = <0x00000000 0x0 0x00000000 0x3c000000>; -+ -+ v3d: v3d@7ec04000 { -+ compatible = "brcm,2711-v3d"; -+ reg = -+ <0x7ec00000 0x4000>, -+ <0x7ec04000 0x4000>; -+ reg-names = "hub", "core0"; -+ -+ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; -+ resets = <&pm BCM2835_RESET_V3D>; -+ clocks = <&clocks BCM2835_CLOCK_V3D>; -+ interrupts = ; -+ status = "okay"; -+ }; -+ }; -+ -+ scb: scb { -+ compatible = "simple-bus"; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ -+ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, -+ <0x0 0x40000000 0x0 0xff800000 0x00800000>, -+ <0x6 0x00000000 0x6 0x00000000 0x40000000>, -+ <0x0 0x00000000 0x0 0x00000000 0xfc000000>; -+ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0xfc000000>; -+ -+ pcie_0: pcie@7d500000 { -+ reg = <0x0 0x7d500000 0x9310>, -+ <0x0 0x7e00f300 0x20>; -+ msi-controller; -+ msi-parent = <&pcie_0>; -+ #address-cells = <3>; -+ #interrupt-cells = <1>; -+ #size-cells = <2>; -+ bus-range = <0x0 0x01>; -+ compatible = "brcm,bcm7211-pcie", "brcm,bcm7445-pcie", -+ "brcm,pci-plat-dev"; -+ max-link-speed = <2>; -+ tot-num-pcie = <1>; -+ linux,pci-domain = <0>; -+ interrupts = , -+ ; -+ interrupt-names = "pcie", "msi"; -+ interrupt-map-mask = <0x0 0x0 0x0 0x7>; -+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 -+ IRQ_TYPE_LEVEL_HIGH -+ 0 0 0 2 &gicv2 GIC_SPI 144 -+ IRQ_TYPE_LEVEL_HIGH -+ 0 0 0 3 &gicv2 GIC_SPI 145 -+ IRQ_TYPE_LEVEL_HIGH -+ 0 0 0 4 &gicv2 GIC_SPI 146 -+ IRQ_TYPE_LEVEL_HIGH>; -+ -+ /* Map outbound accesses from scb:0x6_00000000-03ffffff -+ * to pci:0x0_f8000000-fbffffff -+ */ -+ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 -+ 0x0 0x04000000>; -+ /* Map inbound accesses from pci:0x0_00000000..ffffffff -+ * to scb:0x0_00000000-ffffffff -+ */ -+ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 -+ 0x1 0x00000000>; -+ status = "okay"; -+ }; -+ -+ genet: genet@7d580000 { -+ compatible = "brcm,genet-v5"; -+ reg = <0x0 0x7d580000 0x10000>; -+ status = "okay"; -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ interrupts = , -+ ; -+ phy-handle = <&phy1>; -+ phy-mode = "rgmii"; -+ mdio@e14 { -+ #address-cells = <0x0>; -+ #size-cells = <0x1>; -+ compatible = "brcm,genet-mdio-v5"; -+ reg = <0xe14 0x8>; -+ reg-names = "mdio"; -+ phy1: genet-phy@0 { -+ compatible = -+ "ethernet-phy-ieee802.3-c22"; -+ /* No interrupts - use PHY_POLL */ -+ max-speed = <1000>; -+ reg = <0x1>; -+ }; -+ }; -+ }; -+ -+ xhci: xhci@7e9c0000 { -+ compatible = "generic-xhci"; -+ status = "disabled"; -+ reg = <0x0 0x7e9c0000 0x100000>; -+ interrupts = ; -+ }; -+ -+ vchiq: mailbox@7e00b840 { -+ compatible = "brcm,bcm2838-vchiq"; -+ reg = <0 0x7e00b840 0x3c>; -+ interrupts = ; -+ }; -+ -+ hevc-decoder@7eb00000 { -+ compatible = "raspberrypi,argon-hevc-decoder"; -+ reg = <0x0 0x7eb00000 0x10000>; -+ status = "okay"; -+ }; -+ -+ argon-local-intc@7eb10000 { -+ compatible = "raspberrypi,argon-local-intc"; -+ reg = <0x0 0x7eb10000 0x1000>; -+ status = "okay"; -+ interrupts = ; -+ }; -+ -+ h264-decoder@7eb20000 { -+ compatible = "raspberrypi,argon-h264-decoder"; -+ reg = <0x0 0x7eb20000 0x10000>; -+ status = "okay"; -+ }; -+ -+ vp9-decoder@7eb30000 { -+ compatible = "raspberrypi,argon-vp9-decoder"; -+ reg = <0x0 0x7eb30000 0x10000>; -+ status = "okay"; -+ }; -+ }; -+}; -+ -+&clk_osc { -+ clock-frequency = <54000000>; -+}; -+ -+&clocks { -+ compatible = "brcm,bcm2838-cprman"; -+}; -+ -+&cpu_thermal { -+ coefficients = <(-487) 410040>; -+}; -+ -+&dsi0 { -+ interrupts = ; -+}; -+ -+&dsi1 { -+ interrupts = ; -+}; -+ -+&gpio { -+ gpclk0_gpio49: gpclk0_gpio49 { -+ brcm,pins = <49>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ gpclk1_gpio50: gpclk1_gpio50 { -+ brcm,pins = <50>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ gpclk2_gpio51: gpclk2_gpio51 { -+ brcm,pins = <51>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ -+ i2c0_gpio46: i2c0_gpio46 { -+ brcm,pins = <46 47>; -+ brcm,function = ; -+ }; -+ i2c1_gpio46: i2c1_gpio46 { -+ brcm,pins = <46 47>; -+ brcm,function = ; -+ }; -+ i2c3_gpio2: i2c3_gpio2 { -+ brcm,pins = <2 3>; -+ brcm,function = ; -+ }; -+ i2c3_gpio4: i2c3_gpio4 { -+ brcm,pins = <4 5>; -+ brcm,function = ; -+ }; -+ i2c4_gpio6: i2c4_gpio6 { -+ brcm,pins = <6 7>; -+ brcm,function = ; -+ }; -+ i2c4_gpio8: i2c4_gpio8 { -+ brcm,pins = <8 9>; -+ brcm,function = ; -+ }; -+ i2c5_gpio10: i2c5_gpio10 { -+ brcm,pins = <10 11>; -+ brcm,function = ; -+ }; -+ i2c5_gpio12: i2c5_gpio12 { -+ brcm,pins = <12 13>; -+ brcm,function = ; -+ }; -+ i2c6_gpio0: i2c6_gpio0 { -+ brcm,pins = <0 1>; -+ brcm,function = ; -+ }; -+ i2c6_gpio22: i2c6_gpio22 { -+ brcm,pins = <22 23>; -+ brcm,function = ; -+ }; -+ i2c_slave_gpio8: i2c_slave_gpio8 { -+ brcm,pins = <8 9 10 11>; -+ brcm,function = ; -+ }; -+ -+ jtag_gpio48: jtag_gpio48 { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = ; -+ }; -+ -+ mii_gpio28: mii_gpio28 { -+ brcm,pins = <28 29 30 31>; -+ brcm,function = ; -+ }; -+ mii_gpio36: mii_gpio36 { -+ brcm,pins = <36 37 38 39>; -+ brcm,function = ; -+ }; -+ -+ pcm_gpio50: pcm_gpio50 { -+ brcm,pins = <50 51 52 53>; -+ brcm,function = ; -+ }; -+ -+ pwm0_gpio52: pwm0_gpio52 { -+ brcm,pins = <52>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ pwm1_gpio53: pwm1_gpio53 { -+ brcm,pins = <53>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ -+ /* The following group consists of: -+ * RGMII_START_STOP -+ * RGMII_RX_OK -+ */ -+ rgmii_gpio35: rgmii_gpio35 { -+ brcm,pins = <35 36>; -+ brcm,function = ; -+ }; -+ rgmii_irq_gpio34: rgmii_irq_gpio34 { -+ brcm,pins = <34>; -+ brcm,function = ; -+ }; -+ rgmii_irq_gpio39: rgmii_irq_gpio39 { -+ brcm,pins = <39>; -+ brcm,function = ; -+ }; -+ rgmii_mdio_gpio28: rgmii_mdio_gpio28 { -+ brcm,pins = <28 29>; -+ brcm,function = ; -+ }; -+ rgmii_mdio_gpio37: rgmii_mdio_gpio37 { -+ brcm,pins = <37 38>; -+ brcm,function = ; -+ }; -+ -+ spi0_gpio46: spi0_gpio46 { -+ brcm,pins = <46 47 48 49>; -+ brcm,function = ; -+ }; -+ spi2_gpio46: spi2_gpio46 { -+ brcm,pins = <46 47 48 49 50>; -+ brcm,function = ; -+ }; -+ spi3_gpio0: spi3_gpio0 { -+ brcm,pins = <0 1 2 3>; -+ brcm,function = ; -+ }; -+ spi4_gpio4: spi4_gpio4 { -+ brcm,pins = <4 5 6 7>; -+ brcm,function = ; -+ }; -+ spi5_gpio12: spi5_gpio12 { -+ brcm,pins = <12 13 14 15>; -+ brcm,function = ; -+ }; -+ spi6_gpio18: spi6_gpio18 { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = ; -+ }; -+ -+ uart2_gpio0: uart2_gpio0 { -+ brcm,pins = <0 1>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { -+ brcm,pins = <2 3>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ uart3_gpio4: uart3_gpio4 { -+ brcm,pins = <4 5>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { -+ brcm,pins = <6 7>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ uart4_gpio8: uart4_gpio8 { -+ brcm,pins = <8 9>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { -+ brcm,pins = <10 11>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ uart5_gpio12: uart5_gpio12 { -+ brcm,pins = <12 13>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+ uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { -+ brcm,pins = <14 15>; -+ brcm,function = ; -+ brcm,pull = ; -+ }; -+}; -+ -+&vec { -+ interrupts = ; -+}; -+ -+&usb { -+ interrupts = ; -+}; -+ -+&hdmi { -+ interrupts = , -+ ; -+}; -+ -+&uart1 { -+ interrupts = ; -+}; -+ -+&spi1 { -+ interrupts = ; -+}; -+ -+&spi2 { -+ interrupts = ; -+}; -+ -+&csi0 { -+ interrupts = ; -+}; -+ -+&csi1 { -+ interrupts = ; -+}; -+ -+&sdhci { -+ interrupts = ; -+}; -+ -+&i2c0 { -+ interrupts = ; -+}; -+ -+&i2c1 { -+ interrupts = ; -+}; -+ -+&i2c2 { -+ interrupts = ; -+}; -+ -+&gpio { -+ interrupts = , -+ , -+ , -+ ; -+}; -+ -+&mailbox { -+ interrupts = ; -+}; -+ -+&rng { -+ compatible = "brcm,bcm2838-rng200"; -+}; -+ -+&sdhost { -+ interrupts = ; -+}; -+ -+&uart0 { -+ interrupts = ; -+}; -+ -+&dma { -+ interrupts = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , /* dmalite 7 */ -+ , /* dmalite 8 */ -+ , /* dmalite 9 */ -+ , /* dmalite 10 */ -+ /* DMA4 - 40 bit DMA engines */ -+ , /* dma4 11 */ -+ , /* dma4 12 */ -+ , /* dma4 13 */ -+ ; /* dma4 14 */ -+ interrupt-names = "dma0", -+ "dma1", -+ "dma2", -+ "dma3", -+ "dma4", -+ "dma5", -+ "dma6", -+ "dma7", -+ "dma8", -+ "dma9", -+ "dma10", -+ "dma11", -+ "dma12", -+ "dma13", -+ "dma14"; -+ brcm,dma-channel-mask = <0x7ef5>; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0632-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch b/target/linux/brcm2708/patches-4.19/950-0632-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch new file mode 100644 index 0000000000..755ca34440 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0632-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch @@ -0,0 +1,130 @@ +From 16cf378051d7fff6772a7acaecbacddec7822330 Mon Sep 17 00:00:00 2001 +From: John Sheu +Date: Thu, 15 Nov 2018 10:57:16 -0500 +Subject: [PATCH] media: vb2: Allow reqbufs(0) with "in use" MMAP + buffers + +Upstream commit d644cca50f366cd109845ae92e37c09ed79adf81 + +Videobuf2 presently does not allow VIDIOC_REQBUFS to destroy outstanding +buffers if the queue is of type V4L2_MEMORY_MMAP, and if the buffers are +considered "in use". This is different behavior than for other memory +types and prevents us from deallocating buffers in following two cases: + +1) There are outstanding mmap()ed views on the buffer. However even if + we put the buffer in reqbufs(0), there will be remaining references, + due to vma .open/close() adjusting vb2 buffer refcount appropriately. + This means that the buffer will be in fact freed only when the last + mmap()ed view is unmapped. + +2) Buffer has been exported as a DMABUF. Refcount of the vb2 buffer + is managed properly by VB2 DMABUF ops, i.e. incremented on DMABUF + get and decremented on DMABUF release. This means that the buffer + will be alive until all importers release it. + +Considering both cases above, there does not seem to be any need to +prevent reqbufs(0) operation, because buffer lifetime is already +properly managed by both mmap() and DMABUF code paths. Let's remove it +and allow userspace freeing the queue (and potentially allocating a new +one) even though old buffers might be still in processing. + +To let userspace know that the kernel now supports orphaning buffers +that are still in use, add a new V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS +to be set by reqbufs and create_bufs. + +[p.zabel@pengutronix.de: added V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS, + updated documentation, and added back debug message] + +Signed-off-by: John Sheu +Reviewed-by: Pawel Osciak +Signed-off-by: Tomasz Figa +Signed-off-by: Philipp Zabel +Acked-by: Sakari Ailus +Signed-off-by: Hans Verkuil +[hverkuil-cisco@xs4all.nl: added V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS ref] +Signed-off-by: Mauro Carvalho Chehab +--- + Documentation/media/uapi/v4l/vidioc-reqbufs.rst | 17 ++++++++++++++--- + drivers/media/common/videobuf2/videobuf2-core.c | 8 +++----- + drivers/media/common/videobuf2/videobuf2-v4l2.c | 2 +- + include/uapi/linux/videodev2.h | 1 + + 4 files changed, 19 insertions(+), 9 deletions(-) + +--- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst ++++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst +@@ -59,9 +59,14 @@ When the I/O method is not supported the + code. + + Applications can call :ref:`VIDIOC_REQBUFS` again to change the number of +-buffers, however this cannot succeed when any buffers are still mapped. +-A ``count`` value of zero frees all buffers, after aborting or finishing +-any DMA in progress, an implicit ++buffers. Note that if any buffers are still mapped or exported via DMABUF, ++then :ref:`VIDIOC_REQBUFS` can only succeed if the ++``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` capability is set. Otherwise ++:ref:`VIDIOC_REQBUFS` will return the ``EBUSY`` error code. ++If ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` is set, then these buffers are ++orphaned and will be freed when they are unmapped or when the exported DMABUF ++fds are closed. A ``count`` value of zero frees or orphans all buffers, after ++aborting or finishing any DMA in progress, an implicit + :ref:`VIDIOC_STREAMOFF `. + + +@@ -112,6 +117,7 @@ any DMA in progress, an implicit + .. _V4L2-BUF-CAP-SUPPORTS-USERPTR: + .. _V4L2-BUF-CAP-SUPPORTS-DMABUF: + .. _V4L2-BUF-CAP-SUPPORTS-REQUESTS: ++.. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS: + + .. cssclass:: longtable + +@@ -132,6 +138,11 @@ any DMA in progress, an implicit + * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS`` + - 0x00000008 + - This buffer type supports :ref:`requests `. ++ * - ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` ++ - 0x00000010 ++ - The kernel allows calling :ref:`VIDIOC_REQBUFS` while buffers are still ++ mapped or exported via DMABUF. These orphaned buffers will be freed ++ when they are unmapped or when the exported DMABUF fds are closed. + + Return Value + ============ +--- a/drivers/media/common/videobuf2/videobuf2-core.c ++++ b/drivers/media/common/videobuf2/videobuf2-core.c +@@ -684,11 +684,9 @@ int vb2_core_reqbufs(struct vb2_queue *q + * are not in use and can be freed. + */ + mutex_lock(&q->mmap_lock); +- if (q->memory == VB2_MEMORY_MMAP && __buffers_in_use(q)) { +- mutex_unlock(&q->mmap_lock); +- dprintk(1, "memory in use, cannot free\n"); +- return -EBUSY; +- } ++ if (debug && q->memory == VB2_MEMORY_MMAP && ++ __buffers_in_use(q)) ++ dprintk(1, "memory in use, orphaning buffers\n"); + + /* + * Call queue_cancel to clean up any buffers in the PREPARED or +--- a/drivers/media/common/videobuf2/videobuf2-v4l2.c ++++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c +@@ -484,7 +484,7 @@ EXPORT_SYMBOL(vb2_querybuf); + + static void fill_buf_caps(struct vb2_queue *q, u32 *caps) + { +- *caps = 0; ++ *caps = V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS; + if (q->io_modes & VB2_MMAP) + *caps |= V4L2_BUF_CAP_SUPPORTS_MMAP; + if (q->io_modes & VB2_USERPTR) +--- a/include/uapi/linux/videodev2.h ++++ b/include/uapi/linux/videodev2.h +@@ -881,6 +881,7 @@ struct v4l2_requestbuffers { + #define V4L2_BUF_CAP_SUPPORTS_USERPTR (1 << 1) + #define V4L2_BUF_CAP_SUPPORTS_DMABUF (1 << 2) + #define V4L2_BUF_CAP_SUPPORTS_REQUESTS (1 << 3) ++#define V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS (1 << 4) + + /** + * struct v4l2_plane - plane info for multi-planar buffers diff --git a/target/linux/brcm2708/patches-4.19/950-0633-overlays-Add-i2c3-6-and-uart2-5-overlays.patch b/target/linux/brcm2708/patches-4.19/950-0633-overlays-Add-i2c3-6-and-uart2-5-overlays.patch deleted file mode 100644 index 84e015aa67..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0633-overlays-Add-i2c3-6-and-uart2-5-overlays.patch +++ /dev/null @@ -1,359 +0,0 @@ -From 13be2bbd1a22f1b4d9fd260d80b561698f623ac1 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 30 May 2019 16:44:24 +0100 -Subject: [PATCH 633/806] overlays: Add i2c3-6 and uart2-5 overlays - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 8 +++ - arch/arm/boot/dts/overlays/README | 52 ++++++++++++++++++++ - arch/arm/boot/dts/overlays/i2c3-overlay.dts | 27 ++++++++++ - arch/arm/boot/dts/overlays/i2c4-overlay.dts | 27 ++++++++++ - arch/arm/boot/dts/overlays/i2c5-overlay.dts | 27 ++++++++++ - arch/arm/boot/dts/overlays/i2c6-overlay.dts | 27 ++++++++++ - arch/arm/boot/dts/overlays/uart2-overlay.dts | 27 ++++++++++ - arch/arm/boot/dts/overlays/uart3-overlay.dts | 27 ++++++++++ - arch/arm/boot/dts/overlays/uart4-overlay.dts | 27 ++++++++++ - arch/arm/boot/dts/overlays/uart5-overlay.dts | 27 ++++++++++ - 10 files changed, 276 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/i2c3-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c4-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c5-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c6-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart2-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart3-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart4-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart5-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -65,6 +65,10 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - i2c-sensor.dtbo \ - i2c0-bcm2708.dtbo \ - i2c1-bcm2708.dtbo \ -+ i2c3.dtbo \ -+ i2c4.dtbo \ -+ i2c5.dtbo \ -+ i2c6.dtbo \ - i2s-gpio28-31.dtbo \ - ilitek251x.dtbo \ - iqaudio-codec.dtbo \ -@@ -149,6 +153,10 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - tpm-slb9670.dtbo \ - uart0.dtbo \ - uart1.dtbo \ -+ uart2.dtbo \ -+ uart3.dtbo \ -+ uart4.dtbo \ -+ uart5.dtbo \ - udrc.dtbo \ - upstream.dtbo \ - vc4-fkms-v3d.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1137,6 +1137,34 @@ Params: sda1_pin GPIO pin - "yes") - - -+Name: i2c3 -+Info: Enable the i2c3 bus -+Load: dtoverlay=i2c3, -+Params: pins_2_3 Use GPIOs 2 and 3 -+ pins_4_5 Use GPIOs 4 and 5 (default) -+ -+ -+Name: i2c4 -+Info: Enable the i2c4 bus -+Load: dtoverlay=i2c4, -+Params: pins_6_7 Use GPIOs 6 and 7 -+ pins_8_9 Use GPIOs 8 and 9 (default) -+ -+ -+Name: i2c5 -+Info: Enable the i2c5 bus -+Load: dtoverlay=i2c5, -+Params: pins_10_11 Use GPIOs 10 and 11 -+ pins_12_13 Use GPIOs 12 and 13 (default) -+ -+ -+Name: i2c6 -+Info: Enable the i2c6 bus -+Load: dtoverlay=i2c6, -+Params: pins_0_1 Use GPIOs 0 and 1 -+ pins_22_23 Use GPIOs 22 and 23 (default) -+ -+ - Name: i2s-gpio28-31 - Info: move I2S function block to GPIO 28 to 31 - Load: dtoverlay=i2s-gpio28-31 -@@ -2199,6 +2227,30 @@ Params: txd1_pin GPIO pin - rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) - - -+Name: uart2 -+Info: Enable uart 2 on GPIOs 0-3 -+Load: dtoverlay=uart2, -+Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off) -+ -+ -+Name: uart3 -+Info: Enable uart 3 on GPIOs 4-7 -+Load: dtoverlay=uart3, -+Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off) -+ -+ -+Name: uart4 -+Info: Enable uart 4 on GPIOs 8-11 -+Load: dtoverlay=uart4, -+Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off) -+ -+ -+Name: uart5 -+Info: Enable uart 5 on GPIOs 12-15 -+Load: dtoverlay=uart5, -+Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off) -+ -+ - Name: udrc - Info: Configures the NW Digital Radio UDRC Hat - Load: dtoverlay=udrc,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c3-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&i2c3>; -+ __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c3_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c3_pins>; -+ __dormant__ { -+ brcm,pins = <2 3>; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_2_3 = <0>,"=1"; -+ pins_4_5 = <0>,"!1"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c4-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&i2c4>; -+ __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c4_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c4_pins>; -+ __dormant__ { -+ brcm,pins = <6 7>; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_6_7 = <0>,"=1"; -+ pins_8_9 = <0>,"!1"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c5-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&i2c5>; -+ __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c5_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c5_pins>; -+ __dormant__ { -+ brcm,pins = <10 11>; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_10_11 = <0>,"=1"; -+ pins_12_13 = <0>,"!1"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c6-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&i2c6>; -+ __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c6_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c6_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_0_1 = <0>,"=1"; -+ pins_22_23 = <0>,"!1"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart2-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&uart2>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart2_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart2_pins>; -+ __dormant__ { -+ brcm,pins = <0 1 2 3>; -+ brcm,pull = <0 2 2 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ ctsrts = <0>,"=1"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart3-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&uart3>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart3_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart3_pins>; -+ __dormant__ { -+ brcm,pins = <4 5 6 7>; -+ brcm,pull = <0 2 2 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ ctsrts = <0>,"=1"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart4-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&uart4>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart4_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart4_pins>; -+ __dormant__ { -+ brcm,pins = <8 9 10 11>; -+ brcm,pull = <0 2 2 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ ctsrts = <0>,"=1"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart5-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&uart5>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart5_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart5_pins>; -+ __dormant__ { -+ brcm,pins = <12 13 14 15>; -+ brcm,pull = <0 2 2 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ ctsrts = <0>,"=1"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0633-overlays-Add-real-parameters-to-the-rpi-poe-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0633-overlays-Add-real-parameters-to-the-rpi-poe-overlay.patch new file mode 100644 index 0000000000..51dd1d7661 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0633-overlays-Add-real-parameters-to-the-rpi-poe-overlay.patch @@ -0,0 +1,33 @@ +From a11b6221e69ba4177ee428e2cb6fb4e4bd68c5f4 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 5 Jul 2019 09:22:10 +0100 +Subject: [PATCH] overlays: Add real parameters to the rpi-poe overlay + +As a result of being loaded by the POE HAT EEPROM, the rpi-poe overlay +doesn't expose parameters in the usual way; instead it adds them to +the base Device Tree, and the user is expected to use "dtparam=..." +to access them. + +To make the documentation correct and to protect users who load the +overlay explicitly, expecting to be able to use the parameters, add +real parameters to the overlay as well. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/rpi-poe-overlay.dts | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts +@@ -60,4 +60,11 @@ + poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; + }; + }; ++ ++ __overrides__ { ++ poe_fan_temp0 = <&trip0>,"temperature:0"; ++ poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; ++ poe_fan_temp1 = <&trip1>,"temperature:0"; ++ poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; ++ }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0634-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch b/target/linux/brcm2708/patches-4.19/950-0634-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch new file mode 100644 index 0000000000..669306d15b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0634-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch @@ -0,0 +1,587 @@ +From c46811a3b0e0fb76015ac956172e40bce4e6d9b3 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 5 Jul 2019 14:49:22 +0100 +Subject: [PATCH] overlays: Rename pi3- overlays to be less + model-specific (#3052) + +Rename the various pi3- overlays to be more generic, listing +the devices they apply to in the README. The original names are +retained for backwards compatibility as files that just include +the new versions - the README marks them as being deprecated. + +See: https://github.com/raspberrypi/firmware/issues/1174 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 4 + + arch/arm/boot/dts/overlays/README | 97 ++++++++++++------- + .../arm/boot/dts/overlays/act-led-overlay.dts | 27 ++++++ + .../boot/dts/overlays/disable-bt-overlay.dts | 55 +++++++++++ + .../dts/overlays/disable-wifi-overlay.dts | 20 ++++ + .../boot/dts/overlays/miniuart-bt-overlay.dts | 74 ++++++++++++++ + .../boot/dts/overlays/pi3-act-led-overlay.dts | 28 +----- + .../dts/overlays/pi3-disable-bt-overlay.dts | 56 +---------- + .../dts/overlays/pi3-disable-wifi-overlay.dts | 21 +--- + .../dts/overlays/pi3-miniuart-bt-overlay.dts | 75 +------------- + 10 files changed, 246 insertions(+), 211 deletions(-) + create mode 100644 arch/arm/boot/dts/overlays/act-led-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/disable-bt-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/disable-wifi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -1,6 +1,7 @@ + # Overlays for the Raspberry Pi platform + + dtbo-$(CONFIG_ARCH_BCM2835) += \ ++ act-led.dtbo \ + adau1977-adc.dtbo \ + adau7002-simple.dtbo \ + ads1015.dtbo \ +@@ -26,6 +27,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + dht11.dtbo \ + dionaudio-loco.dtbo \ + dionaudio-loco-v2.dtbo \ ++ disable-bt.dtbo \ ++ disable-wifi.dtbo \ + dpi18.dtbo \ + dpi24.dtbo \ + draws.dtbo \ +@@ -91,6 +94,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + media-center.dtbo \ + midi-uart0.dtbo \ + midi-uart1.dtbo \ ++ miniuart-bt.dtbo \ + mmc.dtbo \ + mpu6050.dtbo \ + mz61581.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -180,14 +180,16 @@ Params: + + act_led_activelow Set to "on" to invert the sense of the LED + (default "off") +- N.B. For Pi3 see pi3-act-led overlay. ++ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led ++ overlay. + + act_led_gpio Set which GPIO to use for the activity LED + (in case you want to connect it to an external + device) + (default "16" on a non-Plus board, "47" on a + Plus or Pi 2) +- N.B. For Pi3 see pi3-act-led overlay. ++ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led ++ overlay. + + pwr_led_trigger + pwr_led_activelow +@@ -205,6 +207,23 @@ Params: + and the other i2c baudrate parameters. + + ++Name: act-led ++Info: Pi 3B, 3B+, 3A+ and 4B use a GPIO expander to drive the LEDs which can ++ only be accessed from the VPU. There is a special driver for this with a ++ separate DT node, which has the unfortunate consequence of breaking the ++ act_led_gpio and act_led_activelow dtparams. ++ This overlay changes the GPIO controller back to the standard one and ++ restores the dtparams. ++Load: dtoverlay=act-led,= ++Params: activelow Set to "on" to invert the sense of the LED ++ (default "off") ++ ++ gpio Set which GPIO to use for the activity LED ++ (in case you want to connect it to an external ++ device) ++ REQUIRED ++ ++ + Name: adau1977-adc + Info: Overlay for activation of ADAU1977 ADC codec over I2C for control + and I2S for data. +@@ -509,6 +528,21 @@ Params: 24db_digital_gain Allow ga + that does not result in clipping/distortion!) + + ++Name: disable-bt ++Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring ++ UART0/ttyAMA0 over GPIOs 14 & 15. ++ N.B. To disable the systemd service that initialises the modem so it ++ doesn't use the UART, use 'sudo systemctl disable hciuart'. ++Load: dtoverlay=disable-bt ++Params: ++ ++ ++Name: disable-wifi ++Info: Disable onboard WiFi on Pi 3B, 3B+, 3A+, 4B and Zero W. ++Load: dtoverlay=disable-wifi ++Params: ++ ++ + Name: dpi18 + Info: Overlay for a generic 18-bit DPI display + This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output +@@ -1447,6 +1481,20 @@ Load: dtoverlay=midi-uart1 + Params: + + ++Name: miniuart-bt ++Info: Switch the onboard Bluetooth function on Pi 3B, 3B+, 3A+, 4B and Zero W ++ to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & ++ 15. Note that this may reduce the maximum usable baudrate. ++ N.B. It is also necessary to edit /lib/systemd/system/hciuart.service ++ and replace ttyAMA0 with ttyS0, unless using Raspbian or another ++ distribution with udev rules that create /dev/serial0 and /dev/serial1, ++ in which case use /dev/serial1 instead because it will always be ++ correct. Furthermore, you must also set core_freq and core_freq_min to ++ the same value in config.txt or the miniuart will not work. ++Load: dtoverlay=miniuart-bt ++Params: ++ ++ + Name: mmc + Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock + Load: dtoverlay=mmc,= +@@ -1509,48 +1557,27 @@ Params: panel Display + + + Name: pi3-act-led +-Info: Pi3 uses a GPIO expander to drive the LEDs which can only be accessed +- from the VPU. There is a special driver for this with a separate DT +- node, which has the unfortunate consequence of breaking the +- act_led_gpio and act_led_activelow dtparams. +- This overlay changes the GPIO controller back to the standard one and +- restores the dtparams. +-Load: dtoverlay=pi3-act-led,= +-Params: activelow Set to "on" to invert the sense of the LED +- (default "off") +- +- gpio Set which GPIO to use for the activity LED +- (in case you want to connect it to an external +- device) +- REQUIRED ++Info: This overlay has been renamed act-led, keeping pi3-act-led as an alias ++ for backwards compatibility. ++Load: + + + Name: pi3-disable-bt +-Info: Disable Pi3 Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15 +- N.B. To disable the systemd service that initialises the modem so it +- doesn't use the UART, use 'sudo systemctl disable hciuart'. +-Load: dtoverlay=pi3-disable-bt +-Params: ++Info: This overlay has been renamed disable-bt, keeping pi3-disable-bt as an ++ alias for backwards compatibility. ++Load: + + + Name: pi3-disable-wifi +-Info: Disable Pi3 onboard WiFi +-Load: dtoverlay=pi3-disable-wifi +-Params: ++Info: This overlay has been renamed disable-wifi, keeping pi3-disable-wifi as ++ an alias for backwards compatibility. ++Load: + + + Name: pi3-miniuart-bt +-Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore +- UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum +- usable baudrate. +- N.B. It is also necessary to edit /lib/systemd/system/hciuart.service +- and replace ttyAMA0 with ttyS0, unless you have a system with udev rules +- that create /dev/serial0 and /dev/serial1, in which case use +- /dev/serial1 instead because it will always be correct. Furthermore, +- you must also set core_freq=250 in config.txt or the miniuart will not +- work. +-Load: dtoverlay=pi3-miniuart-bt +-Params: ++Info: This overlay has been renamed miniuart-bt, keeping pi3-miniuart-bt as ++ an alias for backwards compatibility. ++Load: + + + Name: pibell +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/act-led-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed ++ from the VPU. There is a special driver for this with a separate DT node, ++ which has the unfortunate consequence of breaking the act_led_gpio and ++ act_led_activelow dtparams. ++ ++ This overlay changes the GPIO controller back to the standard one and ++ restores the dtparams. ++*/ ++ ++/{ ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&act_led>; ++ frag0: __overlay__ { ++ gpios = <&gpio 0 0>; ++ }; ++ }; ++ ++ __overrides__ { ++ gpio = <&frag0>,"gpios:4"; ++ activelow = <&frag0>,"gpios:8"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/disable-bt-overlay.dts +@@ -0,0 +1,55 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. ++ To disable the systemd service that initialises the modem so it doesn't use ++ the UART: ++ ++ sudo systemctl disable hciuart ++*/ ++ ++/{ ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&uart1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&uart0_pins>; ++ __overlay__ { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&bt_pins>; ++ __overlay__ { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/aliases"; ++ __overlay__ { ++ serial0 = "/soc/serial@7e201000"; ++ serial1 = "/soc/serial@7e215040"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/disable-wifi-overlay.dts +@@ -0,0 +1,20 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&mmc>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&mmcnr>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts +@@ -0,0 +1,74 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore ++ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum ++ usable baudrate. ++ ++ It is also necessary to edit /lib/systemd/system/hciuart.service and ++ replace ttyAMA0 with ttyS0, unless you have a system with udev rules ++ that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1 ++ instead because it will always be correct. ++ ++ If cmdline.txt uses the alias serial0 to refer to the user-accessable port ++ then the firmware will replace with the appropriate port whether or not ++ this overlay is used. ++*/ ++ ++/{ ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&uart0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart1>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&uart0_pins>; ++ __overlay__ { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&uart1_pins>; ++ __overlay__ { ++ brcm,pins = <32 33>; ++ brcm,function = <2>; /* alt5=UART1 */ ++ brcm,pull = <0 2>; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&gpio>; ++ __overlay__ { ++ fake_bt_cts: fake_bt_cts { ++ brcm,pins = <31>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target-path = "/aliases"; ++ __overlay__ { ++ serial0 = "/soc/serial@7e201000"; ++ serial1 = "/soc/serial@7e215040"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts +@@ -1,27 +1 @@ +-/dts-v1/; +-/plugin/; +- +-/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed +- from the VPU. There is a special driver for this with a separate DT node, +- which has the unfortunate consequence of breaking the act_led_gpio and +- act_led_activelow dtparams. +- +- This overlay changes the GPIO controller back to the standard one and +- restores the dtparams. +-*/ +- +-/{ +- compatible = "brcm,bcm2835"; +- +- fragment@0 { +- target = <&act_led>; +- frag0: __overlay__ { +- gpios = <&gpio 0 0>; +- }; +- }; +- +- __overrides__ { +- gpio = <&frag0>,"gpios:4"; +- activelow = <&frag0>,"gpios:8"; +- }; +-}; ++#include "act-led-overlay.dts" +--- a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts +@@ -1,55 +1 @@ +-/dts-v1/; +-/plugin/; +- +-/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. +- To disable the systemd service that initialises the modem so it doesn't use +- the UART: +- +- sudo systemctl disable hciuart +-*/ +- +-/{ +- compatible = "brcm,bcm2835"; +- +- fragment@0 { +- target = <&uart1>; +- __overlay__ { +- status = "disabled"; +- }; +- }; +- +- fragment@1 { +- target = <&uart0>; +- __overlay__ { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins>; +- status = "okay"; +- }; +- }; +- +- fragment@2 { +- target = <&uart0_pins>; +- __overlay__ { +- brcm,pins; +- brcm,function; +- brcm,pull; +- }; +- }; +- +- fragment@3 { +- target = <&bt_pins>; +- __overlay__ { +- brcm,pins; +- brcm,function; +- brcm,pull; +- }; +- }; +- +- fragment@4 { +- target-path = "/aliases"; +- __overlay__ { +- serial0 = "/soc/serial@7e201000"; +- serial1 = "/soc/serial@7e215040"; +- }; +- }; +-}; ++#include "disable-bt-overlay.dts" +--- a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts +@@ -1,20 +1 @@ +-/dts-v1/; +-/plugin/; +- +-/{ +- compatible = "brcm,bcm2835"; +- +- fragment@0 { +- target = <&mmc>; +- __overlay__ { +- status = "disabled"; +- }; +- }; +- +- fragment@1 { +- target = <&mmcnr>; +- __overlay__ { +- status = "disabled"; +- }; +- }; +-}; ++#include "disable-wifi-overlay.dts" +--- a/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts +@@ -1,74 +1 @@ +-/dts-v1/; +-/plugin/; +- +-/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore +- UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum +- usable baudrate. +- +- It is also necessary to edit /lib/systemd/system/hciuart.service and +- replace ttyAMA0 with ttyS0, unless you have a system with udev rules +- that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1 +- instead because it will always be correct. +- +- If cmdline.txt uses the alias serial0 to refer to the user-accessable port +- then the firmware will replace with the appropriate port whether or not +- this overlay is used. +-*/ +- +-/{ +- compatible = "brcm,bcm2835"; +- +- fragment@0 { +- target = <&uart0>; +- __overlay__ { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart0_pins>; +- status = "okay"; +- }; +- }; +- +- fragment@1 { +- target = <&uart1>; +- __overlay__ { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>; +- status = "okay"; +- }; +- }; +- +- fragment@2 { +- target = <&uart0_pins>; +- __overlay__ { +- brcm,pins; +- brcm,function; +- brcm,pull; +- }; +- }; +- +- fragment@3 { +- target = <&uart1_pins>; +- __overlay__ { +- brcm,pins = <32 33>; +- brcm,function = <2>; /* alt5=UART1 */ +- brcm,pull = <0 2>; +- }; +- }; +- +- fragment@4 { +- target = <&gpio>; +- __overlay__ { +- fake_bt_cts: fake_bt_cts { +- brcm,pins = <31>; +- brcm,function = <1>; /* output */ +- }; +- }; +- }; +- +- fragment@5 { +- target-path = "/aliases"; +- __overlay__ { +- serial0 = "/soc/serial@7e201000"; +- serial1 = "/soc/serial@7e215040"; +- }; +- }; +-}; ++#include "miniuart-bt-overlay.dts" diff --git a/target/linux/brcm2708/patches-4.19/950-0634-spi-devicetree-add-overlays-for-spi-3-to-6.patch b/target/linux/brcm2708/patches-4.19/950-0634-spi-devicetree-add-overlays-for-spi-3-to-6.patch deleted file mode 100644 index a59cd5cecf..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0634-spi-devicetree-add-overlays-for-spi-3-to-6.patch +++ /dev/null @@ -1,581 +0,0 @@ -From a4ea446a07d7ba010c3c32286a22dc89cffa1e54 Mon Sep 17 00:00:00 2001 -From: Martin Sperl -Date: Sun, 12 May 2019 16:17:08 +0000 -Subject: [PATCH 634/806] spi: devicetree: add overlays for spi 3 to 6 - -Signed-off-by: Martin Sperl ---- - arch/arm/boot/dts/overlays/Makefile | 8 ++ - arch/arm/boot/dts/overlays/README | 104 ++++++++++++++++++ - .../boot/dts/overlays/spi3-1cs-overlay.dts | 44 ++++++++ - .../boot/dts/overlays/spi3-2cs-overlay.dts | 56 ++++++++++ - .../boot/dts/overlays/spi4-1cs-overlay.dts | 44 ++++++++ - .../boot/dts/overlays/spi4-2cs-overlay.dts | 56 ++++++++++ - .../boot/dts/overlays/spi5-1cs-overlay.dts | 44 ++++++++ - .../boot/dts/overlays/spi5-2cs-overlay.dts | 56 ++++++++++ - .../boot/dts/overlays/spi6-1cs-overlay.dts | 44 ++++++++ - .../boot/dts/overlays/spi6-2cs-overlay.dts | 56 ++++++++++ - 10 files changed, 512 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -144,6 +144,14 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - spi2-1cs.dtbo \ - spi2-2cs.dtbo \ - spi2-3cs.dtbo \ -+ spi3-1cs.dtbo \ -+ spi3-2cs.dtbo \ -+ spi4-1cs.dtbo \ -+ spi4-2cs.dtbo \ -+ spi5-1cs.dtbo \ -+ spi5-2cs.dtbo \ -+ spi6-1cs.dtbo \ -+ spi6-2cs.dtbo \ - ssd1306.dtbo \ - superaudioboard.dtbo \ - sx150x.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -2085,6 +2085,110 @@ Params: cs0_pin GPIO pin - is 'okay' or enabled). - - -+Name: spi3-1cs -+Info: Enables spi3 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi3-1cs,= -+Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev3.0 (default -+ is 'on' or enabled). -+ -+ -+Name: spi3-2cs -+Info: Enables spi3 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi3-2cs,= -+Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). -+ cs1_pin GPIO pin for CS1 (default 24 - BCM SPI3_CE1). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev3.0 (default -+ is 'on' or enabled). -+ cs1_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev3.1 (default -+ is 'on' or enabled). -+ -+ -+Name: spi4-1cs -+Info: Enables spi4 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi4-1cs,= -+Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev4.0 (default -+ is 'on' or enabled). -+ -+ -+Name: spi4-2cs -+Info: Enables spi4 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi4-2cs,= -+Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). -+ cs1_pin GPIO pin for CS1 (default 25 - BCM SPI4_CE1). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev4.0 (default -+ is 'on' or enabled). -+ cs1_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev4.1 (default -+ is 'on' or enabled). -+ -+ -+Name: spi5-1cs -+Info: Enables spi5 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi5-1cs,= -+Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev5.0 (default -+ is 'on' or enabled). -+ -+ -+Name: spi5-2cs -+Info: Enables spi5 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi5-2cs,= -+Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). -+ cs1_pin GPIO pin for CS1 (default 26 - BCM SPI5_CE1). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev5.0 (default -+ is 'on' or enabled). -+ cs1_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev5.1 (default -+ is 'on' or enabled). -+ -+ -+Name: spi6-1cs -+Info: Enables spi6 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi6-1cs,= -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev6.0 (default -+ is 'on' or enabled). -+ -+ -+Name: spi6-2cs -+Info: Enables spi6 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi6-2cs,= -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). -+ cs1_pin GPIO pin for CS1 (default 27 - BCM SPI6_CE1). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev6.0 (default -+ is 'on' or enabled). -+ cs1_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev6.1 (default -+ is 'on' or enabled). -+ -+ - Name: ssd1306 - Info: Overlay for activation of SSD1306 over I2C OLED display framebuffer. - Load: dtoverlay=ssd1306,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&spi3_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <0>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi3>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi3_pins &spi3_cs_pins>; -+ cs-gpios = <&gpio 0 1>; -+ status = "okay"; -+ -+ spidev3_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev3_0>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts -@@ -0,0 +1,56 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&spi3_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <0 24>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi3>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi3_pins &spi3_cs_pins>; -+ cs-gpios = <&gpio 0 1>, <&gpio 24 1>; -+ status = "okay"; -+ -+ spidev3_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev3_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev3_0>,"status"; -+ cs1_spidev = <&spidev3_1>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&spi4_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <4>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi4>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi4_pins &spi4_cs_pins>; -+ cs-gpios = <&gpio 4 1>; -+ status = "okay"; -+ -+ spidev4_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev4_0>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts -@@ -0,0 +1,56 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&spi4_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <4 25>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi4>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi4_pins &spi4_cs_pins>; -+ cs-gpios = <&gpio 4 1>, <&gpio 25 1>; -+ status = "okay"; -+ -+ spidev4_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev4_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev4_0>,"status"; -+ cs1_spidev = <&spidev4_1>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&spi5_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <12>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi5>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi5_pins &spi5_cs_pins>; -+ cs-gpios = <&gpio 12 1>; -+ status = "okay"; -+ -+ spidev5_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev5_0>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts -@@ -0,0 +1,56 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&spi5_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <12 26>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi5>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi5_pins &spi5_cs_pins>; -+ cs-gpios = <&gpio 12 1>, <&gpio 26 1>; -+ status = "okay"; -+ -+ spidev5_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev5_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev5_0>,"status"; -+ cs1_spidev = <&spidev5_1>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&spi6_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <18>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi6>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi6_pins &spi6_cs_pins>; -+ cs-gpios = <&gpio 18 1>; -+ status = "okay"; -+ -+ spidev6_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev6_0>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts -@@ -0,0 +1,56 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ fragment@0 { -+ target = <&spi6_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <18 27>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi6>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi6_pins &spi6_cs_pins>; -+ cs-gpios = <&gpio 18 1>, <&gpio 27 1>; -+ status = "okay"; -+ -+ spidev6_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev6_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev6_0>,"status"; -+ cs1_spidev = <&spidev6_1>,"status"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0635-i2c-bcm2835-Move-IRQ-request-after-clock-code-in-pro.patch b/target/linux/brcm2708/patches-4.19/950-0635-i2c-bcm2835-Move-IRQ-request-after-clock-code-in-pro.patch new file mode 100644 index 0000000000..b363e753ea --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0635-i2c-bcm2835-Move-IRQ-request-after-clock-code-in-pro.patch @@ -0,0 +1,66 @@ +From 614cade3a68f7214939e1c72acd5fcc9d49beeef Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Fri, 21 Jun 2019 03:52:49 -0700 +Subject: [PATCH] i2c: bcm2835: Move IRQ request after clock code in + probe + +Commit 4a5cfa39465cad25dd736d7ceba8a5d32eea4ecc upstream. + +If any of the clock code in the probe fails and returns, the IRQ +will not be freed. Moving the IRQ request to last allows it to +be freed on any errors further up in the probe function. devm_ +calls can apparently not be used because there are some potential +race conditions that will arise. + +Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") +Signed-off-by: Annaliese McDermond +Acked-by: Stefan Wahren +Signed-off-by: Wolfram Sang +--- + drivers/i2c/busses/i2c-bcm2835.c | 28 ++++++++++++++-------------- + 1 file changed, 14 insertions(+), 14 deletions(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -521,20 +521,6 @@ static int bcm2835_i2c_probe(struct plat + if (IS_ERR(i2c_dev->regs)) + return PTR_ERR(i2c_dev->regs); + +- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); +- if (!irq) { +- dev_err(&pdev->dev, "No IRQ resource\n"); +- return -ENODEV; +- } +- i2c_dev->irq = irq->start; +- +- ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, +- dev_name(&pdev->dev), i2c_dev); +- if (ret) { +- dev_err(&pdev->dev, "Could not request IRQ\n"); +- return -ENODEV; +- } +- + mclk_name = of_clk_get_parent_name(pdev->dev.of_node, 0); + + bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk_name, i2c_dev); +@@ -564,6 +550,20 @@ static int bcm2835_i2c_probe(struct plat + return ret; + } + ++ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!irq) { ++ dev_err(&pdev->dev, "No IRQ resource\n"); ++ return -ENODEV; ++ } ++ i2c_dev->irq = irq->start; ++ ++ ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, ++ dev_name(&pdev->dev), i2c_dev); ++ if (ret) { ++ dev_err(&pdev->dev, "Could not request IRQ\n"); ++ return -ENODEV; ++ } ++ + adap = &i2c_dev->adapter; + i2c_set_adapdata(adap, i2c_dev); + adap->owner = THIS_MODULE; diff --git a/target/linux/brcm2708/patches-4.19/950-0635-overlays-Add-the-spi-gpio40-45-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0635-overlays-Add-the-spi-gpio40-45-overlay.patch deleted file mode 100644 index 7315658408..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0635-overlays-Add-the-spi-gpio40-45-overlay.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 726da40b8c272d181a41686195f91b914363167b Mon Sep 17 00:00:00 2001 -From: Tim Gover -Date: Tue, 22 Jan 2019 10:49:41 +0000 -Subject: [PATCH 635/806] overlays: Add the spi-gpio40-45 overlay - -The 2711 B0 boot EEPROM is programmed via SPI0 on GPIO -pins 40-43 CS0. Add a device tree overlay to optionally -change the SPI0 pinmux from the external GPIO pins to -the boot EEPROM pins. ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 ++++ - .../dts/overlays/spi-gpio40-45-overlay.dts | 36 +++++++++++++++++++ - 3 files changed, 43 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -135,6 +135,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - smi-dev.dtbo \ - smi-nand.dtbo \ - spi-gpio35-39.dtbo \ -+ spi-gpio40-45.dtbo \ - spi-rtc.dtbo \ - spi0-cs.dtbo \ - spi0-hw-cs.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1967,6 +1967,12 @@ Load: dtoverlay=spi-gpio35-39 - Params: - - -+Name: spi-gpio40-45 -+Info: Move SPI function block to GPIOs 40 to 45 -+Load: dtoverlay=spi-gpio40-45 -+Params: -+ -+ - Name: spi-rtc - Info: Adds support for a number of SPI Real Time Clock devices - Load: dtoverlay=spi-rtc,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts -@@ -0,0 +1,36 @@ -+/* -+ * Boot EEPROM overlay -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0_cs_pins>; -+ __overlay__ { -+ brcm,pins = <45 44 43>; -+ brcm,function = <1>; /* output */ -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0_pins>; -+ __overlay__ { -+ brcm,pins = <40 41 42>; -+ brcm,function = <3>; /* alt4 */ -+ status = "okay"; -+ }; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0636-config-Permit-LPAE-and-PCIE_BRCMSTB-on-BCM2835.patch b/target/linux/brcm2708/patches-4.19/950-0636-config-Permit-LPAE-and-PCIE_BRCMSTB-on-BCM2835.patch deleted file mode 100644 index 8f990e1eef..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0636-config-Permit-LPAE-and-PCIE_BRCMSTB-on-BCM2835.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 0e8ed7a892a510383017cdddee7b772473f1f7c8 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 4 Sep 2018 11:50:25 +0100 -Subject: [PATCH 636/806] config: Permit LPAE and PCIE_BRCMSTB on BCM2835 - ---- - arch/arm/mach-bcm/Kconfig | 4 ++++ - drivers/pci/controller/Kconfig | 4 ++-- - 2 files changed, 6 insertions(+), 2 deletions(-) - ---- a/arch/arm/mach-bcm/Kconfig -+++ b/arch/arm/mach-bcm/Kconfig -@@ -161,6 +161,7 @@ config ARCH_BCM2835 - select GPIOLIB - select ARM_AMBA - select ARM_ERRATA_411920 if ARCH_MULTI_V6 -+ select ARM_GIC - select ARM_TIMER_SP804 - select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 - select TIMER_OF -@@ -169,6 +170,9 @@ config ARCH_BCM2835 - select PINCTRL - select PINCTRL_BCM2835 - select MFD_SYSCON if ARCH_MULTI_V7 -+ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE -+ select ZONE_DMA if ARM_LPAE -+ select MFD_CORE - help - This enables support for the Broadcom BCM2835 and BCM2836 SoCs. - This SoC is used in the Raspberry Pi and Roku 2 devices. ---- a/drivers/pci/controller/Kconfig -+++ b/drivers/pci/controller/Kconfig -@@ -280,9 +280,9 @@ config VMD - - config PCIE_BRCMSTB - tristate "Broadcom Brcmstb PCIe platform host driver" -- depends on ARCH_BRCMSTB || BMIPS_GENERIC -+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM2835 - depends on OF -- depends on SOC_BRCMSTB -+ depends on SOC_BRCMSTB || ARCH_BCM2835 - default ARCH_BRCMSTB || BMIPS_GENERIC - help - Adds support for Broadcom Settop Box PCIe host controller. diff --git a/target/linux/brcm2708/patches-4.19/950-0636-i2c-bcm2835-Ensure-clock-exists-when-probing.patch b/target/linux/brcm2708/patches-4.19/950-0636-i2c-bcm2835-Ensure-clock-exists-when-probing.patch new file mode 100644 index 0000000000..4a468f0291 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0636-i2c-bcm2835-Ensure-clock-exists-when-probing.patch @@ -0,0 +1,72 @@ +From 1a5122f1756ef4fc5779324ad26b6a04142166b5 Mon Sep 17 00:00:00 2001 +From: Annaliese McDermond +Date: Fri, 21 Jun 2019 03:52:50 -0700 +Subject: [PATCH] i2c: bcm2835: Ensure clock exists when probing + +Commit 9de93b04df16b055824e3f1f13fedb90fbcf2e4f upstream. + +Probe function fails to recognize that upstream clock actually +doesn't yet exist because clock driver has not been initialized. +Actually try to go get the clock and test for its existence +before trying to set up a downstream clock based upon it. + +This fixes a bug that causes the i2c driver not to work with +monolithic kernels. + +Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") +Signed-off-by: Annaliese McDermond +Acked-by: Stefan Wahren +Signed-off-by: Wolfram Sang +--- + drivers/i2c/busses/i2c-bcm2835.c | 16 ++++++++++++---- + 1 file changed, 12 insertions(+), 4 deletions(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -244,15 +244,18 @@ static const struct clk_ops clk_bcm2835_ + }; + + static struct clk *bcm2835_i2c_register_div(struct device *dev, +- const char *mclk_name, ++ struct clk *mclk, + struct bcm2835_i2c_dev *i2c_dev) + { + struct clk_init_data init; + struct clk_bcm2835_i2c *priv; + char name[32]; ++ const char *mclk_name; + + snprintf(name, sizeof(name), "%s_div", dev_name(dev)); + ++ mclk_name = __clk_get_name(mclk); ++ + init.ops = &clk_bcm2835_i2c_ops; + init.name = name; + init.parent_names = (const char* []) { mclk_name }; +@@ -505,8 +508,8 @@ static int bcm2835_i2c_probe(struct plat + struct resource *mem, *irq; + int ret; + struct i2c_adapter *adap; +- const char *mclk_name; + struct clk *bus_clk; ++ struct clk *mclk; + u32 bus_clk_rate; + + i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); +@@ -521,9 +524,14 @@ static int bcm2835_i2c_probe(struct plat + if (IS_ERR(i2c_dev->regs)) + return PTR_ERR(i2c_dev->regs); + +- mclk_name = of_clk_get_parent_name(pdev->dev.of_node, 0); ++ mclk = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(mclk)) { ++ if (PTR_ERR(mclk) != -EPROBE_DEFER) ++ dev_err(&pdev->dev, "Could not get clock\n"); ++ return PTR_ERR(mclk); ++ } + +- bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk_name, i2c_dev); ++ bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk, i2c_dev); + + if (IS_ERR(bus_clk)) { + dev_err(&pdev->dev, "Could not register clock\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0637-overlays-i2c-gpio-Fix-the-bus-parameter.patch b/target/linux/brcm2708/patches-4.19/950-0637-overlays-i2c-gpio-Fix-the-bus-parameter.patch new file mode 100644 index 0000000000..9a6d15506e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0637-overlays-i2c-gpio-Fix-the-bus-parameter.patch @@ -0,0 +1,35 @@ +From d562b2187263b40aacc1a50d3f25db2cf28696d6 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 9 Jul 2019 10:32:40 +0100 +Subject: [PATCH] overlays: i2c-gpio: Fix the "bus" parameter + +The "bus" parameter has two functions - providing unique names for +multiple instances of the overlay, and allowing the number of the bus +(i.e. "i2c-") to be specified. The second function hasn't worked +as intended because the overlay doesn't include a "reg" property and +the firmware intentionally won't create a "reg" property if one doesn't +already exist. + +Allow the bus numbering scheme to work as intended by providing a "reg" +with a default value that means "the next available one". + +See: https://github.com/raspberrypi/linux/issues/3062 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts +@@ -7,8 +7,10 @@ + + fragment@0 { + target-path = "/"; ++ + __overlay__ { + i2c_gpio: i2c@0 { ++ reg = <0xffffffff>; + compatible = "i2c-gpio"; + gpios = <&gpio 23 0 /* sda */ + &gpio 24 0 /* scl */ diff --git a/target/linux/brcm2708/patches-4.19/950-0638-2711-Add-basic-64-bit-support.patch b/target/linux/brcm2708/patches-4.19/950-0638-2711-Add-basic-64-bit-support.patch deleted file mode 100644 index 9cd94de352..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0638-2711-Add-basic-64-bit-support.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 0e7db01b8ce2c2fb5596e7a9b7104e9947e5c269 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 8 Mar 2019 21:12:39 +0000 -Subject: [PATCH 638/806] 2711: Add basic 64-bit support - -This commit adds initial support for 64-bit 2711 builds. However, -it will only work as much as it does if the Pi4 RAM is limited to -1GB - more than that and several things break (SD card, coherent -allocations, etc.) - -Signed-off-by: Phil Elwell ---- - arch/arm64/boot/dts/broadcom/Makefile | 1 + - .../boot/dts/broadcom/bcm2711-rpi-4-b.dts | 3 + - 3 files changed, 1295 insertions(+) - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts - ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp - bcm2837-rpi-3-b-plus.dtb - dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb - dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2711-rpi-4-b.dts" diff --git a/target/linux/brcm2708/patches-4.19/950-0638-tty-amba-pl011-Make-TX-optimisation-conditional.patch b/target/linux/brcm2708/patches-4.19/950-0638-tty-amba-pl011-Make-TX-optimisation-conditional.patch new file mode 100644 index 0000000000..8d40afb444 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0638-tty-amba-pl011-Make-TX-optimisation-conditional.patch @@ -0,0 +1,85 @@ +From 3e3c13488e4efa0236c47a98ee5e759bf1f7c757 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 11 Jul 2019 13:13:39 +0100 +Subject: [PATCH] tty: amba-pl011: Make TX optimisation conditional + +pl011_tx_chars takes a "from_irq" parameter to reduce the number of +register accesses. When from_irq is true the function assumes that the +FIFO is half empty and writes up to half a FIFO's worth of bytes +without polling the FIFO status register, the reasoning being that +the function is being called as a result of the TX interrupt being +raised. This logic would work were it not for the fact that +pl011_rx_chars, called from pl011_int before pl011_tx_chars, releases +the spinlock before calling tty_flip_buffer_push. + +A user thread writing to the UART claims the spinlock and ultimately +calls pl011_tx_chars with from_irq set to false. This reverts to the +older logic that polls the FIFO status register before sending every +byte. If this happen on an SMP system during the section of the IRQ +handler where the spinlock has been released, then by the time the TX +interrupt handler is called, the FIFO may already be full, and any +further writes are likely to be lost. + +The fix involves adding a per-port flag that is true iff running from +within the interrupt handler and the spinlock has not yet been released. +This flag is then used as the value for the from_irq parameter of +pl011_tx_chars, causing polling to be used in the unsafe case. + +Fixes: 1e84d22322ce ("serial/amba-pl011: Refactor and simplify TX FIFO handling") + +Signed-off-by: Phil Elwell +--- + drivers/tty/serial/amba-pl011.c | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +--- a/drivers/tty/serial/amba-pl011.c ++++ b/drivers/tty/serial/amba-pl011.c +@@ -270,6 +270,7 @@ struct uart_amba_port { + unsigned int old_cr; /* state during shutdown */ + unsigned int fixed_baud; /* vendor-set fixed baud rate */ + char type[12]; ++ bool irq_locked; /* in irq, unreleased lock */ + #ifdef CONFIG_DMA_ENGINE + /* DMA stuff */ + bool using_tx_dma; +@@ -813,6 +814,7 @@ __acquires(&uap->port.lock) + if (!uap->using_tx_dma) + return; + ++ uap->irq_locked = 0; + dmaengine_terminate_async(uap->dmatx.chan); + + if (uap->dmatx.queued) { +@@ -939,6 +941,7 @@ static void pl011_dma_rx_chars(struct ua + fifotaken = pl011_fifo_to_tty(uap); + } + ++ uap->irq_locked = 0; + spin_unlock(&uap->port.lock); + dev_vdbg(uap->port.dev, + "Took %d chars from DMA buffer and %d chars from the FIFO\n", +@@ -1347,6 +1350,7 @@ __acquires(&uap->port.lock) + { + pl011_fifo_to_tty(uap); + ++ uap->irq_locked = 0; + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(&uap->port.state->port); + /* +@@ -1482,6 +1486,7 @@ static irqreturn_t pl011_int(int irq, vo + int handled = 0; + + spin_lock_irqsave(&uap->port.lock, flags); ++ uap->irq_locked = 1; + status = pl011_read(uap, REG_RIS) & uap->im; + if (status) { + do { +@@ -1501,7 +1506,7 @@ static irqreturn_t pl011_int(int irq, vo + UART011_CTSMIS|UART011_RIMIS)) + pl011_modem_status(uap); + if (status & UART011_TXIS) +- pl011_tx_chars(uap, true); ++ pl011_tx_chars(uap, uap->irq_locked); + + if (pass_counter-- == 0) + break; diff --git a/target/linux/brcm2708/patches-4.19/950-0639-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch b/target/linux/brcm2708/patches-4.19/950-0639-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch new file mode 100644 index 0000000000..3e413c7d00 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0639-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch @@ -0,0 +1,90 @@ +From 705bc230789927f96d6c9c70dc5475ebaf08aa54 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Thu, 11 Jul 2019 17:55:43 +0100 +Subject: [PATCH] xhci: add quirk for host controllers that don't + update endpoint DCS + +Seen on a VLI VL805 PCIe to USB controller. For non-stream endpoints +at least, if the xHC halts on a particular TRB due to an error then +the DCS field in the Out Endpoint Context maintained by the hardware +is not updated with the current cycle state. + +Using the quirk XHCI_EP_CTX_BROKEN_DCS and instead fetch the DCS bit +from the TRB that the xHC stopped on. + +See: https://github.com/raspberrypi/linux/issues/3060 + +Signed-off-by: Jonathan Bell +--- + drivers/usb/host/xhci-pci.c | 4 +++- + drivers/usb/host/xhci-ring.c | 26 +++++++++++++++++++++++++- + drivers/usb/host/xhci.h | 1 + + 3 files changed, 29 insertions(+), 2 deletions(-) + +--- a/drivers/usb/host/xhci-pci.c ++++ b/drivers/usb/host/xhci-pci.c +@@ -223,8 +223,10 @@ static void xhci_pci_quirks(struct devic + xhci->quirks |= XHCI_BROKEN_STREAMS; + + if (pdev->vendor == PCI_VENDOR_ID_VIA && +- pdev->device == 0x3483) ++ pdev->device == 0x3483) { + xhci->quirks |= XHCI_LPM_SUPPORT; ++ xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS; ++ } + + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == 0x1042) +--- a/drivers/usb/host/xhci-ring.c ++++ b/drivers/usb/host/xhci-ring.c +@@ -520,7 +520,10 @@ void xhci_find_new_dequeue_state(struct + struct xhci_virt_ep *ep = &dev->eps[ep_index]; + struct xhci_ring *ep_ring; + struct xhci_segment *new_seg; ++ struct xhci_segment *halted_seg = NULL; + union xhci_trb *new_deq; ++ union xhci_trb *halted_trb; ++ int index = 0; + dma_addr_t addr; + u64 hw_dequeue; + bool cycle_found = false; +@@ -541,7 +544,28 @@ void xhci_find_new_dequeue_state(struct + hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id); + new_seg = ep_ring->deq_seg; + new_deq = ep_ring->dequeue; +- state->new_cycle_state = hw_dequeue & 0x1; ++ ++ /* ++ * Quirk: xHC write-back of the DCS field in the hardware dequeue ++ * pointer is wrong - use the cycle state of the TRB pointed to by ++ * the dequeue pointer. ++ */ ++ if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS && ++ !(ep->ep_state & EP_HAS_STREAMS)) ++ halted_seg = trb_in_td(xhci, cur_td->start_seg, ++ cur_td->first_trb, cur_td->last_trb, ++ hw_dequeue & ~0xf, false); ++ if (halted_seg) { ++ index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) / ++ sizeof(*halted_trb); ++ halted_trb = &halted_seg->trbs[index]; ++ state->new_cycle_state = halted_trb->generic.field[3] & 0x1; ++ xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n", ++ (u8)(hw_dequeue & 0x1), index, ++ state->new_cycle_state); ++ } else { ++ state->new_cycle_state = hw_dequeue & 0x1; ++ } + state->stream_id = stream_id; + + /* +--- a/drivers/usb/host/xhci.h ++++ b/drivers/usb/host/xhci.h +@@ -1865,6 +1865,7 @@ struct xhci_hcd { + #define XHCI_ZERO_64B_REGS BIT_ULL(32) + #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) + #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) ++#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(36) + + unsigned int num_active_eps; + unsigned int limit_active_eps; diff --git a/target/linux/brcm2708/patches-4.19/950-0640-i2c-bcm2835-Set-clock-stretch-timeout-to-35ms.patch b/target/linux/brcm2708/patches-4.19/950-0640-i2c-bcm2835-Set-clock-stretch-timeout-to-35ms.patch new file mode 100644 index 0000000000..280cddf9f2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0640-i2c-bcm2835-Set-clock-stretch-timeout-to-35ms.patch @@ -0,0 +1,47 @@ +From 8d453e2193951057db696e37b9c10e7e35c18cb0 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 12 Jul 2019 15:38:35 +0100 +Subject: [PATCH] i2c: bcm2835: Set clock-stretch timeout to 35ms + +The BCM2835 I2C blocks have a register to set the clock-stretch +timeout - how long the device is allowed to hold SCL low - in bus +cycles. The current driver doesn't write to the register, therefore +the default value of 64 cycles is being used for all devices. + +Set the timeout to the value recommended for SMBus - 35ms. + +See: https://github.com/raspberrypi/linux/issues/3064 + +Signed-off-by: Phil Elwell +--- + drivers/i2c/busses/i2c-bcm2835.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -194,6 +194,7 @@ static int clk_bcm2835_i2c_set_rate(stru + { + struct clk_bcm2835_i2c *div = to_clk_bcm2835_i2c(hw); + u32 redl, fedl; ++ u32 clk_tout; + u32 divider = clk_bcm2835_i2c_calc_divider(rate, parent_rate); + + if (divider == -EINVAL) +@@ -217,6 +218,17 @@ static int clk_bcm2835_i2c_set_rate(stru + bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_DEL, + (fedl << BCM2835_I2C_FEDL_SHIFT) | + (redl << BCM2835_I2C_REDL_SHIFT)); ++ ++ /* ++ * Set the clock stretch timeout to the SMBUs-recommended 35ms. ++ */ ++ if (rate > 0xffff*1000/35) ++ clk_tout = 0xffff; ++ else ++ clk_tout = 35*rate/1000; ++ ++ bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_CLKT, clk_tout); ++ + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0641-ARM-dts-bcm283x-Correct-vchiq-compatible-string-2840.patch b/target/linux/brcm2708/patches-4.19/950-0641-ARM-dts-bcm283x-Correct-vchiq-compatible-string-2840.patch deleted file mode 100644 index fd0fce1db8..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0641-ARM-dts-bcm283x-Correct-vchiq-compatible-string-2840.patch +++ /dev/null @@ -1,76 +0,0 @@ -From 91aa97cc3a193cfd29962e328f9d1da0d8e0aaff Mon Sep 17 00:00:00 2001 -From: 6by9 <6by9@users.noreply.github.com> -Date: Wed, 30 Jan 2019 14:22:03 +0000 -Subject: [PATCH 641/806] ARM: dts: bcm283x: Correct vchiq compatible string - (#2840) - -commit 499770ede3f829e80539f46b59b5f460dc327aa6 upstream. - -To allow VCHIQ to determine the correct cache line size, use the new -"brcm,bcm2836-vchiq" compatible string on BCM2836 and BCM2837. - -Signed-off-by: Phil Elwell -Acked-by: Stefan Wahren -Signed-off-by: Stefan Wahren ---- - arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +- - arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 2 +- - arch/arm/boot/dts/bcm2836-rpi.dtsi | 6 ++++++ - arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +- - arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 2 +- - 5 files changed, 10 insertions(+), 4 deletions(-) - create mode 100644 arch/arm/boot/dts/bcm2836-rpi.dtsi - ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -30,7 +30,7 @@ - #power-domain-cells = <1>; - }; - -- mailbox@7e00b840 { -+ vchiq: mailbox@7e00b840 { - compatible = "brcm,bcm2835-vchiq"; - reg = <0x7e00b840 0x3c>; - interrupts = <0 2>; ---- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -@@ -1,7 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0 - /dts-v1/; - #include "bcm2836.dtsi" --#include "bcm2835-rpi.dtsi" -+#include "bcm2836-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi -@@ -0,0 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0 -+#include "bcm2835-rpi.dtsi" -+ -+&vchiq { -+ compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; -+}; ---- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts -@@ -1,7 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0 - /dts-v1/; - #include "bcm2837.dtsi" --#include "bcm2835-rpi.dtsi" -+#include "bcm2836-rpi.dtsi" - #include "bcm283x-rpi-lan7515.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" - ---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -@@ -1,7 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0 - /dts-v1/; - #include "bcm2837.dtsi" --#include "bcm2835-rpi.dtsi" -+#include "bcm2836-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" diff --git a/target/linux/brcm2708/patches-4.19/950-0641-arm64-bcm2835-Add-missing-dependency-on-MFD_CORE.patch b/target/linux/brcm2708/patches-4.19/950-0641-arm64-bcm2835-Add-missing-dependency-on-MFD_CORE.patch new file mode 100644 index 0000000000..c82ac8d61d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0641-arm64-bcm2835-Add-missing-dependency-on-MFD_CORE.patch @@ -0,0 +1,28 @@ +From 39964e4a3a2ea18b48be5c31d7980895f0bdd99c Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 8 Mar 2019 13:02:16 -0800 +Subject: [PATCH] arm64: bcm2835: Add missing dependency on MFD_CORE. + +commit 7a9b6be9fe58194d9a349159176e8cc0d8f10ef8 upstream. + +When adding the MFD dependency for power domains and WDT in bcm2835, I +added it only on the arm32 side and missed it for arm64. + +Fixes: 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.") +Signed-off-by: Eric Anholt +Reported-by: Stefan Wahren +Acked-by: Stefan Wahren +--- + arch/arm64/Kconfig.platforms | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -20,6 +20,7 @@ config ARCH_BCM2835 + bool "Broadcom BCM2835 family" + select TIMER_OF + select GPIOLIB ++ select MFD_CORE + select PINCTRL + select PINCTRL_BCM2835 + select ARM_AMBA diff --git a/target/linux/brcm2708/patches-4.19/950-0642-arm-dts-Change-downstream-vchiq-compatible-string.patch b/target/linux/brcm2708/patches-4.19/950-0642-arm-dts-Change-downstream-vchiq-compatible-string.patch deleted file mode 100644 index a4e4da5e96..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0642-arm-dts-Change-downstream-vchiq-compatible-string.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 00d8817ab207a9f60e94e87acf4f170155aecd48 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 6 Feb 2019 20:45:16 +0000 -Subject: [PATCH 642/806] arm: dts: Change downstream vchiq compatible string - -The new cache line size mechanism requires a different vchiq compatible -string on BCM2836 and BCM2837, but the downstream dts files didn't -inherit the upstream changes. - -See: https://github.com/raspberrypi/linux/issues/2643 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2708-rpi.dtsi | 2 +- - arch/arm/boot/dts/bcm2709-rpi.dtsi | 5 +++++ - arch/arm/boot/dts/bcm2709.dtsi | 2 +- - arch/arm/boot/dts/bcm2710.dtsi | 2 +- - 4 files changed, 8 insertions(+), 3 deletions(-) - create mode 100644 arch/arm/boot/dts/bcm2709-rpi.dtsi - ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -68,7 +68,7 @@ - status = "disabled"; - }; - -- mailbox@7e00b840 { -+ vchiq: mailbox@7e00b840 { - compatible = "brcm,bcm2835-vchiq"; - reg = <0x7e00b840 0x3c>; - interrupts = <0 2>; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2709-rpi.dtsi -@@ -0,0 +1,5 @@ -+#include "bcm2708-rpi.dtsi" -+ -+&vchiq { -+ compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; -+}; ---- a/arch/arm/boot/dts/bcm2709.dtsi -+++ b/arch/arm/boot/dts/bcm2709.dtsi -@@ -1,6 +1,6 @@ - #include "bcm2836.dtsi" - #include "bcm270x.dtsi" --#include "bcm2708-rpi.dtsi" -+#include "bcm2709-rpi.dtsi" - - / { - soc { ---- a/arch/arm/boot/dts/bcm2710.dtsi -+++ b/arch/arm/boot/dts/bcm2710.dtsi -@@ -1,6 +1,6 @@ - #include "bcm2837.dtsi" - #include "bcm270x.dtsi" --#include "bcm2708-rpi.dtsi" -+#include "bcm2709-rpi.dtsi" - - / { - compatible = "brcm,bcm2837", "brcm,bcm2836"; diff --git a/target/linux/brcm2708/patches-4.19/950-0642-overlays-Add-PCF2129-RTC.patch b/target/linux/brcm2708/patches-4.19/950-0642-overlays-Add-PCF2129-RTC.patch new file mode 100644 index 0000000000..7bddfdc6aa --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0642-overlays-Add-PCF2129-RTC.patch @@ -0,0 +1,187 @@ +From 2308f60bb68de69306c542de3983be0007cad37b Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 15 Jul 2019 10:39:05 +0100 +Subject: [PATCH] overlays: Add PCF2129 RTC + +Add support for the PCF2129 RTC to i2c-rtc and i2c-rtc-gpio overlays. +Also add rv3028 to i2c-rtc-gpio (it was missed previously), and don't +attempt to set an alternate address for the PCF2127. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 11 ++++- + .../dts/overlays/i2c-rtc-gpio-overlay.dts | 41 +++++++++++++++++-- + .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 19 ++++++++- + 3 files changed, 64 insertions(+), 7 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1022,6 +1022,8 @@ Params: abx80x Select o + + pcf2127 Select the PCF2127 device + ++ pcf2129 Select the PCF2129 device ++ + pcf8523 Select the PCF8523 device + + pcf8563 Select the PCF8563 device +@@ -1067,10 +1069,14 @@ Params: abx80x Select o + + pcf2127 Select the PCF2127 device + ++ pcf2129 Select the PCF2129 device ++ + pcf8523 Select the PCF8523 device + + pcf8563 Select the PCF8563 device + ++ rv3028 Select the Micro Crystal RV3028 device ++ + addr Sets the address for the RTC. Note that the + device must be configured to use the specified + address. +@@ -1079,11 +1085,14 @@ Params: abx80x Select o + "schottky" (ABx80x only) + + trickle-resistor-ohms Resistor value for trickle charge (DS1339, +- ABx80x) ++ ABx80x, RV3028) + + wakeup-source Specify that the RTC can be used as a wakeup + source + ++ backup-switchover-mode Backup power supply switch mode. Must be 0 for ++ off or 1 for Vdd < VBackup (RV3028 only) ++ + i2c_gpio_sda GPIO used for I2C data (default "23") + + i2c_gpio_scl GPIO used for I2C clock (default "24") +--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts +@@ -121,7 +121,7 @@ + #size-cells = <0>; + status = "okay"; + +- pcf2127: pcf2127@51 { ++ pcf2127@51 { + compatible = "nxp,pcf2127"; + reg = <0x51>; + status = "okay"; +@@ -174,6 +174,36 @@ + }; + }; + ++ fragment@11 { ++ target = <&i2c_gpio>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ rv3028: rv3028@52 { ++ compatible = "microcrystal,rv3028"; ++ reg = <0x52>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@12 { ++ target = <&i2c_gpio>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcf2129@51 { ++ compatible = "nxp,pcf2129"; ++ reg = <0x51>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ + __overrides__ { + abx80x = <0>,"+1"; + ds1307 = <0>,"+2"; +@@ -185,6 +215,8 @@ + pcf8523 = <0>,"+8"; + pcf8563 = <0>,"+9"; + m41t62 = <0>,"+10"; ++ rv3028 = <0>,"+11"; ++ pcf2129 = <0>,"+12"; + + addr = <&abx80x>, "reg:0", + <&ds1307>, "reg:0", +@@ -192,18 +224,19 @@ + <&ds3231>, "reg:0", + <&mcp7940x>, "reg:0", + <&mcp7941x>, "reg:0", +- <&pcf2127>, "reg:0", + <&pcf8523>, "reg:0", + <&pcf8563>, "reg:0", + <&m41t62>, "reg:0"; + + trickle-diode-type = <&abx80x>,"abracon,tc-diode"; + trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", +- <&abx80x>,"abracon,tc-resistor"; ++ <&abx80x>,"abracon,tc-resistor", ++ <&rv3028>,"trickle-resistor-ohms:0"; ++ backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; + wakeup-source = <&ds1339>,"wakeup-source?", + <&ds3231>,"wakeup-source?", + <&mcp7940x>,"wakeup-source?", +- <&mcp7941x>,"wakeup-source?"; ++ <&mcp7941x>,"wakeup-source?"; + i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; + i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; + i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; +--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +@@ -105,7 +105,7 @@ + #size-cells = <0>; + status = "okay"; + +- pcf2127: pcf2127@51 { ++ pcf2127@51 { + compatible = "nxp,pcf2127"; + reg = <0x51>; + status = "okay"; +@@ -173,6 +173,21 @@ + }; + }; + ++ fragment@11 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcf2129@51 { ++ compatible = "nxp,pcf2129"; ++ reg = <0x51>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ + __overrides__ { + abx80x = <0>,"+0"; + ds1307 = <0>,"+1"; +@@ -185,6 +200,7 @@ + pcf8563 = <0>,"+8"; + m41t62 = <0>,"+9"; + rv3028 = <0>,"+10"; ++ pcf2129 = <0>,"+11"; + + addr = <&abx80x>, "reg:0", + <&ds1307>, "reg:0", +@@ -192,7 +208,6 @@ + <&ds3231>, "reg:0", + <&mcp7940x>, "reg:0", + <&mcp7941x>, "reg:0", +- <&pcf2127>, "reg:0", + <&pcf8523>, "reg:0", + <&pcf8563>, "reg:0", + <&m41t62>, "reg:0"; diff --git a/target/linux/brcm2708/patches-4.19/950-0643-bcm2835-dma-Add-proper-40-bit-DMA-support.patch b/target/linux/brcm2708/patches-4.19/950-0643-bcm2835-dma-Add-proper-40-bit-DMA-support.patch deleted file mode 100644 index 94d2c9a9b2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0643-bcm2835-dma-Add-proper-40-bit-DMA-support.patch +++ /dev/null @@ -1,1018 +0,0 @@ -From 621fb1606217c3e72feda69255ae6cb6a7ccfec2 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 4 Apr 2019 13:33:47 +0100 -Subject: [PATCH 643/806] bcm2835-dma: Add proper 40-bit DMA support - -The 40-bit additions are not fully tested, but it should be -capable of supporting both 40-bit memcpy on BCM2711 and regular -Lite channels on BCM2835. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2838.dtsi | 33 +- - drivers/dma/bcm2835-dma.c | 426 ++++++++++++++----- - drivers/pci/controller/pcie-brcmstb-bounce.c | 30 +- - drivers/pci/controller/pcie-brcmstb-bounce.h | 21 +- - drivers/pci/controller/pcie-brcmstb.c | 23 +- - 5 files changed, 395 insertions(+), 138 deletions(-) - ---- a/arch/arm/boot/dts/bcm2838.dtsi -+++ b/arch/arm/boot/dts/bcm2838.dtsi -@@ -372,6 +372,23 @@ - }; - }; - -+ dma40: dma@7e007b00 { -+ compatible = "brcm,bcm2838-dma"; -+ reg = <0x0 0x7e007b00 0x400>; -+ interrupts = -+ , /* dma4 11 */ -+ , /* dma4 12 */ -+ , /* dma4 13 */ -+ ; /* dma4 14 */ -+ interrupt-names = "dma11", -+ "dma12", -+ "dma13", -+ "dma14"; -+ #dma-cells = <1>; -+ brcm,dma-channel-mask = <0x7000>; -+ }; -+ /* DMA4 - 40 bit DMA engines */ -+ - xhci: xhci@7e9c0000 { - compatible = "generic-xhci"; - status = "disabled"; -@@ -689,6 +706,7 @@ - }; - - &dma { -+ reg = <0x7e007000 0xb00>; - interrupts = , - , - , -@@ -699,12 +717,7 @@ - , /* dmalite 7 */ - , /* dmalite 8 */ - , /* dmalite 9 */ -- , /* dmalite 10 */ -- /* DMA4 - 40 bit DMA engines */ -- , /* dma4 11 */ -- , /* dma4 12 */ -- , /* dma4 13 */ -- ; /* dma4 14 */ -+ ; /* dmalite 10 */ - interrupt-names = "dma0", - "dma1", - "dma2", -@@ -715,10 +728,6 @@ - "dma7", - "dma8", - "dma9", -- "dma10", -- "dma11", -- "dma12", -- "dma13", -- "dma14"; -- brcm,dma-channel-mask = <0x7ef5>; -+ "dma10"; -+ brcm,dma-channel-mask = <0x01f5>; - }; ---- a/drivers/dma/bcm2835-dma.c -+++ b/drivers/dma/bcm2835-dma.c -@@ -50,12 +50,18 @@ - #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14 - #define BCM2835_DMA_CHAN_NAME_SIZE 8 - #define BCM2835_DMA_BULK_MASK BIT(0) -+#define BCM2838_DMA_MEMCPY_CHAN 14 -+ -+struct bcm2835_dma_cfg_data { -+ u32 chan_40bit_mask; -+}; - - struct bcm2835_dmadev { - struct dma_device ddev; - spinlock_t lock; - void __iomem *base; - struct device_dma_parameters dma_parms; -+ const struct bcm2835_dma_cfg_data *cfg_data; - }; - - struct bcm2835_dma_cb { -@@ -100,6 +106,7 @@ struct bcm2835_chan { - unsigned int irq_flags; - - bool is_lite_channel; -+ bool is_40bit_channel; - }; - - struct bcm2835_desc { -@@ -189,7 +196,8 @@ struct bcm2835_desc { - #define BCM2835_DMA_DATA_TYPE_S128 16 - - /* Valid only for channels 0 - 14, 15 has its own base address */ --#define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */ -+#define BCM2835_DMA_CHAN_SIZE 0x100 -+#define BCM2835_DMA_CHAN(n) ((n) * BCM2835_DMA_CHAN_SIZE) /* Base address */ - #define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n)) - - /* the max dma length for different channels */ -@@ -200,7 +208,7 @@ struct bcm2835_desc { - #define BCM2838_DMA40_CS 0x00 - #define BCM2838_DMA40_CB 0x04 - #define BCM2838_DMA40_DEBUG 0x0c --#define BCM2858_DMA40_TI 0x10 -+#define BCM2838_DMA40_TI 0x10 - #define BCM2838_DMA40_SRC 0x14 - #define BCM2838_DMA40_SRCI 0x18 - #define BCM2838_DMA40_DEST 0x1c -@@ -209,32 +217,97 @@ struct bcm2835_desc { - #define BCM2838_DMA40_NEXT_CB 0x28 - #define BCM2838_DMA40_DEBUG2 0x2c - --#define BCM2838_DMA40_CS_ACTIVE BIT(0) --#define BCM2838_DMA40_CS_END BIT(1) -+#define BCM2838_DMA40_ACTIVE BIT(0) -+#define BCM2838_DMA40_END BIT(1) -+#define BCM2838_DMA40_INT BIT(2) -+#define BCM2838_DMA40_DREQ BIT(3) /* DREQ state */ -+#define BCM2838_DMA40_RD_PAUSED BIT(4) /* Reading is paused */ -+#define BCM2838_DMA40_WR_PAUSED BIT(5) /* Writing is paused */ -+#define BCM2838_DMA40_DREQ_PAUSED BIT(6) /* Is paused by DREQ flow control */ -+#define BCM2838_DMA40_WAITING_FOR_WRITES BIT(7) /* Waiting for last write */ -+#define BCM2838_DMA40_ERR BIT(10) -+#define BCM2838_DMA40_QOS(x) (((x) & 0x1f) << 16) -+#define BCM2838_DMA40_PANIC_QOS(x) (((x) & 0x1f) << 20) -+#define BCM2838_DMA40_WAIT_FOR_WRITES BIT(28) -+#define BCM2838_DMA40_DISDEBUG BIT(29) -+#define BCM2838_DMA40_ABORT BIT(30) -+#define BCM2838_DMA40_HALT BIT(31) -+#define BCM2838_DMA40_CS_FLAGS(x) (x & (BCM2838_DMA40_QOS(15) | \ -+ BCM2838_DMA40_PANIC_QOS(15) | \ -+ BCM2838_DMA40_WAIT_FOR_WRITES | \ -+ BCM2838_DMA40_DISDEBUG)) -+ -+/* Transfer information bits */ -+#define BCM2838_DMA40_INTEN BIT(0) -+#define BCM2838_DMA40_TDMODE BIT(1) /* 2D-Mode */ -+#define BCM2838_DMA40_WAIT_RESP BIT(2) /* wait for AXI write to be acked */ -+#define BCM2838_DMA40_WAIT_RD_RESP BIT(3) /* wait for AXI read to complete */ -+#define BCM2838_DMA40_PER_MAP(x) ((x & 31) << 9) /* REQ source */ -+#define BCM2838_DMA40_S_DREQ BIT(14) /* enable SREQ for source */ -+#define BCM2838_DMA40_D_DREQ BIT(15) /* enable DREQ for destination */ -+#define BCM2838_DMA40_S_WAIT(x) ((x & 0xff) << 16) /* add DMA read-wait cycles */ -+#define BCM2838_DMA40_D_WAIT(x) ((x & 0xff) << 24) /* add DMA write-wait cycles */ - --#define BCM2838_DMA40_CS_QOS(x) (((x) & 0x1f) << 16) --#define BCM2838_DMA40_CS_PANIC_QOS(x) (((x) & 0x1f) << 20) --#define BCM2838_DMA40_CS_WRITE_WAIT BIT(28) -+/* debug register bits */ -+#define BCM2838_DMA40_DEBUG_WRITE_ERR BIT(0) -+#define BCM2838_DMA40_DEBUG_FIFO_ERR BIT(1) -+#define BCM2838_DMA40_DEBUG_READ_ERR BIT(2) -+#define BCM2838_DMA40_DEBUG_READ_CB_ERR BIT(3) -+#define BCM2838_DMA40_DEBUG_IN_ON_ERR BIT(8) -+#define BCM2838_DMA40_DEBUG_ABORT_ON_ERR BIT(9) -+#define BCM2838_DMA40_DEBUG_HALT_ON_ERR BIT(10) -+#define BCM2838_DMA40_DEBUG_DISABLE_CLK_GATE BIT(11) -+#define BCM2838_DMA40_DEBUG_RSTATE_SHIFT 14 -+#define BCM2838_DMA40_DEBUG_RSTATE_BITS 4 -+#define BCM2838_DMA40_DEBUG_WSTATE_SHIFT 18 -+#define BCM2838_DMA40_DEBUG_WSTATE_BITS 4 -+#define BCM2838_DMA40_DEBUG_RESET BIT(23) -+#define BCM2838_DMA40_DEBUG_ID_SHIFT 24 -+#define BCM2838_DMA40_DEBUG_ID_BITS 4 -+#define BCM2838_DMA40_DEBUG_VERSION_SHIFT 28 -+#define BCM2838_DMA40_DEBUG_VERSION_BITS 4 -+ -+/* Valid only for channels 0 - 3 (11 - 14) */ -+#define BCM2838_DMA40_CHAN(n) (((n) + 11) << 8) /* Base address */ -+#define BCM2838_DMA40_CHANIO(base, n) ((base) + BCM2838_DMA_CHAN(n)) - --#define BCM2838_DMA40_BURST_LEN(x) ((((x) - 1) & 0xf) << 8) --#define BCM2838_DMA40_INC BIT(12) --#define BCM2838_DMA40_SIZE_128 (2 << 13) -+/* the max dma length for different channels */ -+#define MAX_DMA40_LEN SZ_1G - --#define BCM2838_DMA40_MEMCPY_QOS \ -- (BCM2838_DMA40_CS_QOS(0x0) | \ -- BCM2838_DMA40_CS_PANIC_QOS(0x0) | \ -- BCM2838_DMA40_CS_WRITE_WAIT) -+#define BCM2838_DMA40_BURST_LEN(x) ((min(x,16) - 1) << 8) -+#define BCM2838_DMA40_INC BIT(12) -+#define BCM2838_DMA40_SIZE_32 (0 << 13) -+#define BCM2838_DMA40_SIZE_64 (1 << 13) -+#define BCM2838_DMA40_SIZE_128 (2 << 13) -+#define BCM2838_DMA40_SIZE_256 (3 << 13) -+#define BCM2838_DMA40_IGNORE BIT(15) -+#define BCM2838_DMA40_STRIDE(x) ((x) << 16) /* For 2D mode */ -+ -+#define BCM2838_DMA40_MEMCPY_FLAGS \ -+ (BCM2838_DMA40_QOS(0) | \ -+ BCM2838_DMA40_PANIC_QOS(0) | \ -+ BCM2838_DMA40_WAIT_FOR_WRITES | \ -+ BCM2838_DMA40_DISDEBUG) - - #define BCM2838_DMA40_MEMCPY_XFER_INFO \ - (BCM2838_DMA40_SIZE_128 | \ - BCM2838_DMA40_INC | \ - BCM2838_DMA40_BURST_LEN(16)) - -+struct bcm2835_dmadev *memcpy_parent; - static void __iomem *memcpy_chan; - static struct bcm2838_dma40_scb *memcpy_scb; - static dma_addr_t memcpy_scb_dma; - DEFINE_SPINLOCK(memcpy_lock); - -+static const struct bcm2835_dma_cfg_data bcm2835_dma_cfg = { -+ .chan_40bit_mask = 0, -+}; -+ -+static const struct bcm2835_dma_cfg_data bcm2838_dma_cfg = { -+ .chan_40bit_mask = BIT(11) | BIT(12) | BIT(13) | BIT(14), -+}; -+ - static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c) - { - /* lite and normal channels have different max frame length */ -@@ -264,6 +337,32 @@ static inline struct bcm2835_desc *to_bc - return container_of(t, struct bcm2835_desc, vd.tx); - } - -+static inline uint32_t to_bcm2838_ti(uint32_t info) -+{ -+ return ((info & BCM2835_DMA_INT_EN) ? BCM2838_DMA40_INTEN : 0) | -+ ((info & BCM2835_DMA_WAIT_RESP) ? BCM2838_DMA40_WAIT_RESP : 0) | -+ ((info & BCM2835_DMA_S_DREQ) ? -+ (BCM2838_DMA40_S_DREQ | BCM2838_DMA40_WAIT_RD_RESP) : 0) | -+ ((info & BCM2835_DMA_D_DREQ) ? BCM2838_DMA40_D_DREQ : 0) | -+ BCM2838_DMA40_PER_MAP((info >> 16) & 0x1f); -+} -+ -+static inline uint32_t to_bcm2838_srci(uint32_t info) -+{ -+ return ((info & BCM2835_DMA_S_INC) ? BCM2838_DMA40_INC : 0); -+} -+ -+static inline uint32_t to_bcm2838_dsti(uint32_t info) -+{ -+ return ((info & BCM2835_DMA_D_INC) ? BCM2838_DMA40_INC : 0); -+} -+ -+static inline uint32_t to_bcm2838_cbaddr(dma_addr_t addr) -+{ -+ BUG_ON(addr & 0x1f); -+ return (addr >> 5); -+} -+ - static void bcm2835_dma_free_cb_chain(struct bcm2835_desc *desc) - { - size_t i; -@@ -282,45 +381,53 @@ static void bcm2835_dma_desc_free(struct - } - - static void bcm2835_dma_create_cb_set_length( -- struct bcm2835_chan *chan, -+ struct bcm2835_chan *c, - struct bcm2835_dma_cb *control_block, - size_t len, - size_t period_len, - size_t *total_len, - u32 finalextrainfo) - { -- size_t max_len = bcm2835_dma_max_frame_length(chan); -+ size_t max_len = bcm2835_dma_max_frame_length(c); -+ uint32_t cb_len; - - /* set the length taking lite-channel limitations into account */ -- control_block->length = min_t(u32, len, max_len); -+ cb_len = min_t(u32, len, max_len); - -- /* finished if we have no period_length */ -- if (!period_len) -- return; -+ if (period_len) { -+ /* -+ * period_len means: that we need to generate -+ * transfers that are terminating at every -+ * multiple of period_len - this is typically -+ * used to set the interrupt flag in info -+ * which is required during cyclic transfers -+ */ - -- /* -- * period_len means: that we need to generate -- * transfers that are terminating at every -- * multiple of period_len - this is typically -- * used to set the interrupt flag in info -- * which is required during cyclic transfers -- */ -+ /* have we filled in period_length yet? */ -+ if (*total_len + cb_len < period_len) { -+ /* update number of bytes in this period so far */ -+ *total_len += cb_len; -+ } else { -+ /* calculate the length that remains to reach period_len */ -+ cb_len = period_len - *total_len; - -- /* have we filled in period_length yet? */ -- if (*total_len + control_block->length < period_len) { -- /* update number of bytes in this period so far */ -- *total_len += control_block->length; -- return; -+ /* reset total_length for next period */ -+ *total_len = 0; -+ } - } - -- /* calculate the length that remains to reach period_length */ -- control_block->length = period_len - *total_len; -- -- /* reset total_length for next period */ -- *total_len = 0; -- -- /* add extrainfo bits in info */ -- control_block->info |= finalextrainfo; -+ if (c->is_40bit_channel) { -+ struct bcm2838_dma40_scb *scb = -+ (struct bcm2838_dma40_scb *)control_block; -+ -+ scb->len = cb_len; -+ /* add extrainfo bits to ti */ -+ scb->ti |= to_bcm2838_ti(finalextrainfo); -+ } else { -+ control_block->length = cb_len; -+ /* add extrainfo bits to info */ -+ control_block->info |= finalextrainfo; -+ } - } - - static inline size_t bcm2835_dma_count_frames_for_sg( -@@ -343,7 +450,7 @@ static inline size_t bcm2835_dma_count_f - /** - * bcm2835_dma_create_cb_chain - create a control block and fills data in - * -- * @chan: the @dma_chan for which we run this -+ * @c: the @bcm2835_chan for which we run this - * @direction: the direction in which we transfer - * @cyclic: it is a cyclic transfer - * @info: the default info bits to apply per controlblock -@@ -361,12 +468,11 @@ static inline size_t bcm2835_dma_count_f - * @gfp: the GFP flag to use for allocation - */ - static struct bcm2835_desc *bcm2835_dma_create_cb_chain( -- struct dma_chan *chan, enum dma_transfer_direction direction, -+ struct bcm2835_chan *c, enum dma_transfer_direction direction, - bool cyclic, u32 info, u32 finalextrainfo, size_t frames, - dma_addr_t src, dma_addr_t dst, size_t buf_len, - size_t period_len, gfp_t gfp) - { -- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); - size_t len = buf_len, total_len; - size_t frame; - struct bcm2835_desc *d; -@@ -399,11 +505,23 @@ static struct bcm2835_desc *bcm2835_dma_ - - /* fill in the control block */ - control_block = cb_entry->cb; -- control_block->info = info; -- control_block->src = src; -- control_block->dst = dst; -- control_block->stride = 0; -- control_block->next = 0; -+ if (c->is_40bit_channel) { -+ struct bcm2838_dma40_scb *scb = -+ (struct bcm2838_dma40_scb *)control_block; -+ scb->ti = to_bcm2838_ti(info); -+ scb->src = lower_32_bits(src); -+ scb->srci= upper_32_bits(src) | to_bcm2838_srci(info); -+ scb->dst = lower_32_bits(dst); -+ scb->dsti = upper_32_bits(dst) | to_bcm2838_dsti(info); -+ scb->next_cb = 0; -+ } else { -+ control_block->info = info; -+ control_block->src = src; -+ control_block->dst = dst; -+ control_block->stride = 0; -+ control_block->next = 0; -+ } -+ - /* set up length in control_block if requested */ - if (buf_len) { - /* calculate length honoring period_length */ -@@ -417,7 +535,10 @@ static struct bcm2835_desc *bcm2835_dma_ - } - - /* link this the last controlblock */ -- if (frame) -+ if (frame && c->is_40bit_channel) -+ d->cb_list[frame - 1].cb->next = -+ to_bcm2838_cbaddr(cb_entry->paddr); -+ if (frame && !c->is_40bit_channel) - d->cb_list[frame - 1].cb->next = cb_entry->paddr; - - /* update src and dst and length */ -@@ -431,7 +552,14 @@ static struct bcm2835_desc *bcm2835_dma_ - } - - /* the last frame requires extra flags */ -- d->cb_list[d->frames - 1].cb->info |= finalextrainfo; -+ if (c->is_40bit_channel) { -+ struct bcm2838_dma40_scb *scb = -+ (struct bcm2838_dma40_scb *)d->cb_list[d->frames-1].cb; -+ -+ scb->ti |= to_bcm2838_ti(finalextrainfo); -+ } else { -+ d->cb_list[d->frames - 1].cb->info |= finalextrainfo; -+ } - - /* detect a size missmatch */ - if (buf_len && (d->size != buf_len)) -@@ -445,28 +573,51 @@ error_cb: - } - - static void bcm2835_dma_fill_cb_chain_with_sg( -- struct dma_chan *chan, -+ struct bcm2835_chan *c, - enum dma_transfer_direction direction, - struct bcm2835_cb_entry *cb, - struct scatterlist *sgl, - unsigned int sg_len) - { -- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); - size_t len, max_len; - unsigned int i; - dma_addr_t addr; - struct scatterlist *sgent; - -+ pr_err("dma_fill_chain_with_sg(ch %d, dir %d):\n", c->ch, direction); -+ - max_len = bcm2835_dma_max_frame_length(c); - for_each_sg(sgl, sgent, sg_len, i) { -- for (addr = sg_dma_address(sgent), len = sg_dma_len(sgent); -- len > 0; -- addr += cb->cb->length, len -= cb->cb->length, cb++) { -- if (direction == DMA_DEV_TO_MEM) -- cb->cb->dst = addr; -- else -- cb->cb->src = addr; -- cb->cb->length = min(len, max_len); -+ if (c->is_40bit_channel) { -+ struct bcm2838_dma40_scb *scb = -+ (struct bcm2838_dma40_scb *)cb->cb; -+ for (addr = sg_dma_address(sgent), -+ len = sg_dma_len(sgent); -+ len > 0; -+ addr += scb->len, len -= scb->len, scb++) { -+ if (direction == DMA_DEV_TO_MEM) { -+ scb->dst = lower_32_bits(addr); -+ scb->dsti = upper_32_bits(addr) | BCM2838_DMA40_INC; -+ } else { -+ scb->src = lower_32_bits(addr); -+ scb->srci = upper_32_bits(addr) | BCM2838_DMA40_INC; -+ } -+ scb->len = min(len, max_len); -+ pr_err(" %llx, %x\n", (u64)addr, scb->len); -+ } -+ } else { -+ for (addr = sg_dma_address(sgent), -+ len = sg_dma_len(sgent); -+ len > 0; -+ addr += cb->cb->length, len -= cb->cb->length, -+ cb++) { -+ if (direction == DMA_DEV_TO_MEM) -+ cb->cb->dst = addr; -+ else -+ cb->cb->src = addr; -+ cb->cb->length = min(len, max_len); -+ pr_err(" %llx, %x\n", (u64)addr, cb->cb->length); -+ } - } - } - } -@@ -475,6 +626,10 @@ static int bcm2835_dma_abort(struct bcm2 - { - void __iomem *chan_base = c->chan_base; - long int timeout = 10000; -+ u32 wait_mask = BCM2835_DMA_WAITING_FOR_WRITES; -+ -+ if (c->is_40bit_channel) -+ wait_mask = BCM2838_DMA40_WAITING_FOR_WRITES; - - /* - * A zero control block address means the channel is idle. -@@ -487,8 +642,7 @@ static int bcm2835_dma_abort(struct bcm2 - writel(0, chan_base + BCM2835_DMA_CS); - - /* Wait for any current AXI transfer to complete */ -- while ((readl(chan_base + BCM2835_DMA_CS) & -- BCM2835_DMA_WAITING_FOR_WRITES) && --timeout) -+ while ((readl(chan_base + BCM2835_DMA_CS) & wait_mask) && --timeout) - cpu_relax(); - - /* Peripheral might be stuck and fail to signal AXI write responses */ -@@ -505,6 +659,7 @@ static void bcm2835_dma_start_desc(struc - struct virt_dma_desc *vd = vchan_next_desc(&c->vc); - struct bcm2835_desc *d; - -+ pr_err("dma_start_desc(%px)\n", vd); - if (!vd) { - c->desc = NULL; - return; -@@ -514,9 +669,16 @@ static void bcm2835_dma_start_desc(struc - - c->desc = d = to_bcm2835_dma_desc(&vd->tx); - -- writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); -- writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq), -- c->chan_base + BCM2835_DMA_CS); -+ if (c->is_40bit_channel) { -+ writel(to_bcm2838_cbaddr(d->cb_list[0].paddr), -+ c->chan_base + BCM2838_DMA40_CB); -+ writel(BCM2838_DMA40_ACTIVE | BCM2838_DMA40_CS_FLAGS(c->dreq), -+ c->chan_base + BCM2838_DMA40_CS); -+ } else { -+ writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); -+ writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq), -+ c->chan_base + BCM2835_DMA_CS); -+ } - } - - static irqreturn_t bcm2835_dma_callback(int irq, void *data) -@@ -544,7 +706,8 @@ static irqreturn_t bcm2835_dma_callback( - * will remain idle despite the ACTIVE flag being set. - */ - writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE | -- BCM2835_DMA_CS_FLAGS(c->dreq), -+ (c->is_40bit_channel ? BCM2838_DMA40_CS_FLAGS(c->dreq) : -+ BCM2835_DMA_CS_FLAGS(c->dreq)), - c->chan_base + BCM2835_DMA_CS); - - d = c->desc; -@@ -643,9 +806,17 @@ static enum dma_status bcm2835_dma_tx_st - struct bcm2835_desc *d = c->desc; - dma_addr_t pos; - -- if (d->dir == DMA_MEM_TO_DEV) -+ if (d->dir == DMA_MEM_TO_DEV && c->is_40bit_channel) -+ pos = readl(c->chan_base + BCM2838_DMA40_SRC) + -+ ((readl(c->chan_base + BCM2838_DMA40_SRCI) & -+ 0xff) << 8); -+ else if (d->dir == DMA_MEM_TO_DEV && !c->is_40bit_channel) - pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD); -- else if (d->dir == DMA_DEV_TO_MEM) -+ else if (d->dir == DMA_DEV_TO_MEM && c->is_40bit_channel) -+ pos = readl(c->chan_base + BCM2838_DMA40_DEST) + -+ ((readl(c->chan_base + BCM2838_DMA40_DESTI) & -+ 0xff) << 8); -+ else if (d->dir == DMA_DEV_TO_MEM && !c->is_40bit_channel) - pos = readl(c->chan_base + BCM2835_DMA_DEST_AD); - else - pos = 0; -@@ -691,7 +862,7 @@ static struct dma_async_tx_descriptor *b - frames = bcm2835_dma_frames_for_length(len, max_len); - - /* allocate the CB chain - this also fills in the pointers */ -- d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false, -+ d = bcm2835_dma_create_cb_chain(c, DMA_MEM_TO_MEM, false, - info, extra, frames, - src, dst, len, 0, GFP_KERNEL); - if (!d) -@@ -726,11 +897,21 @@ static struct dma_async_tx_descriptor *b - if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) - return NULL; - src = c->cfg.src_addr; -+ /* -+ * One would think it ought to be possible to get the physical -+ * to dma address mapping information from the dma-ranges DT -+ * property, but I've not found a way yet that doesn't involve -+ * open-coding the whole thing. -+ */ -+ if (c->is_40bit_channel) -+ src |= 0x400000000ull; - info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC; - } else { - if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) - return NULL; - dst = c->cfg.dst_addr; -+ if (c->is_40bit_channel) -+ dst |= 0x400000000ull; - info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC; - } - -@@ -738,7 +919,7 @@ static struct dma_async_tx_descriptor *b - frames = bcm2835_dma_count_frames_for_sg(c, sgl, sg_len); - - /* allocate the CB chain */ -- d = bcm2835_dma_create_cb_chain(chan, direction, false, -+ d = bcm2835_dma_create_cb_chain(c, direction, false, - info, extra, - frames, src, dst, 0, 0, - GFP_KERNEL); -@@ -746,7 +927,7 @@ static struct dma_async_tx_descriptor *b - return NULL; - - /* fill in frames with scatterlist pointers */ -- bcm2835_dma_fill_cb_chain_with_sg(chan, direction, d->cb_list, -+ bcm2835_dma_fill_cb_chain_with_sg(c, direction, d->cb_list, - sgl, sg_len); - - return vchan_tx_prep(&c->vc, &d->vd, flags); -@@ -815,7 +996,7 @@ static struct dma_async_tx_descriptor *b - * note that we need to use GFP_NOWAIT, as the ALSA i2s dmaengine - * implementation calls prep_dma_cyclic with interrupts disabled. - */ -- d = bcm2835_dma_create_cb_chain(chan, direction, true, -+ d = bcm2835_dma_create_cb_chain(c, direction, true, - info, extra, - frames, src, dst, buf_len, - period_len, GFP_NOWAIT); -@@ -823,7 +1004,8 @@ static struct dma_async_tx_descriptor *b - return NULL; - - /* wrap around into a loop */ -- d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr; -+ d->cb_list[d->frames - 1].cb->next = c->is_40bit_channel ? -+ to_bcm2838_cbaddr(d->cb_list[0].paddr) : d->cb_list[0].paddr; - - return vchan_tx_prep(&c->vc, &d->vd, flags); - } -@@ -899,9 +1081,11 @@ static int bcm2835_dma_chan_init(struct - c->irq_number = irq; - c->irq_flags = irq_flags; - -- /* check in DEBUG register if this is a LITE channel */ -- if (readl(c->chan_base + BCM2835_DMA_DEBUG) & -- BCM2835_DMA_DEBUG_LITE) -+ /* check for 40bit and lite channels */ -+ if (d->cfg_data->chan_40bit_mask & BIT(chan_id)) -+ c->is_40bit_channel = true; -+ else if (readl(c->chan_base + BCM2835_DMA_DEBUG) & -+ BCM2835_DMA_DEBUG_LITE) - c->is_lite_channel = true; - - return 0; -@@ -918,18 +1102,16 @@ static void bcm2835_dma_free(struct bcm2 - } - } - --int bcm2838_dma40_memcpy_init(struct device *dev) -+int bcm2838_dma40_memcpy_init(void) - { -- if (memcpy_scb) -- return 0; -+ if (!memcpy_parent) -+ return -EPROBE_DEFER; - -- memcpy_scb = dma_alloc_coherent(dev, sizeof(*memcpy_scb), -- &memcpy_scb_dma, GFP_KERNEL); -+ if (!memcpy_chan) -+ return -EINVAL; - -- if (!memcpy_scb) { -- pr_err("bcm2838_dma40_memcpy_init failed!\n"); -+ if (!memcpy_scb) - return -ENOMEM; -- } - - return 0; - } -@@ -956,20 +1138,22 @@ void bcm2838_dma40_memcpy(dma_addr_t dst - scb->next_cb = 0; - - writel((u32)(memcpy_scb_dma >> 5), memcpy_chan + BCM2838_DMA40_CB); -- writel(BCM2838_DMA40_MEMCPY_QOS + BCM2838_DMA40_CS_ACTIVE, -+ writel(BCM2838_DMA40_MEMCPY_FLAGS + BCM2838_DMA40_ACTIVE, - memcpy_chan + BCM2838_DMA40_CS); -+ - /* Poll for completion */ -- while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_CS_END)) -+ while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_END)) - cpu_relax(); - -- writel(BCM2838_DMA40_CS_END, memcpy_chan + BCM2838_DMA40_CS); -+ writel(BCM2838_DMA40_END, memcpy_chan + BCM2838_DMA40_CS); - - spin_unlock_irqrestore(&memcpy_lock, flags); - } - EXPORT_SYMBOL(bcm2838_dma40_memcpy); - - static const struct of_device_id bcm2835_dma_of_match[] = { -- { .compatible = "brcm,bcm2835-dma", }, -+ { .compatible = "brcm,bcm2835-dma", .data = &bcm2835_dma_cfg }, -+ { .compatible = "brcm,bcm2838-dma", .data = &bcm2838_dma_cfg }, - {}, - }; - MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match); -@@ -1001,6 +1185,8 @@ static int bcm2835_dma_probe(struct plat - int irq_flags; - uint32_t chans_available; - char chan_name[BCM2835_DMA_CHAN_NAME_SIZE]; -+ const struct of_device_id *of_id; -+ int chan_count, chan_start, chan_end; - - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -@@ -1022,9 +1208,13 @@ static int bcm2835_dma_probe(struct plat - base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); -- rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK); -- if (rc) -- dev_err(&pdev->dev, "Failed to initialize the legacy API\n"); -+ -+ /* The set of channels can be split across multiple instances. */ -+ chan_start = ((u32)base / BCM2835_DMA_CHAN_SIZE) & 0xf; -+ base -= BCM2835_DMA_CHAN(chan_start); -+ chan_count = resource_size(res) / BCM2835_DMA_CHAN_SIZE; -+ chan_end = min(chan_start + chan_count, -+ BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED + 1); - - od->base = base; - -@@ -1054,6 +1244,14 @@ static int bcm2835_dma_probe(struct plat - - platform_set_drvdata(pdev, od); - -+ of_id = of_match_node(bcm2835_dma_of_match, pdev->dev.of_node); -+ if (!of_id) { -+ dev_err(&pdev->dev, "Failed to match compatible string\n"); -+ return -EINVAL; -+ } -+ -+ od->cfg_data = of_id->data; -+ - /* Request DMA channel mask from device tree */ - if (of_property_read_u32(pdev->dev.of_node, - "brcm,dma-channel-mask", -@@ -1063,18 +1261,34 @@ static int bcm2835_dma_probe(struct plat - goto err_no_dma; - } - -- /* Channel 0 is used by the legacy API */ -- chans_available &= ~BCM2835_DMA_BULK_MASK; -+ /* One channel is reserved for the legacy API */ -+ if (chans_available & BCM2835_DMA_BULK_MASK) { -+ rc = bcm_dmaman_probe(pdev, base, -+ chans_available & BCM2835_DMA_BULK_MASK); -+ if (rc) -+ dev_err(&pdev->dev, -+ "Failed to initialize the legacy API\n"); -+ -+ chans_available &= ~BCM2835_DMA_BULK_MASK; -+ } - -- /* We can't use channels 11-13 yet */ -- chans_available &= ~(BIT(11) | BIT(12) | BIT(13)); -+ /* And possibly one for the 40-bit DMA memcpy API */ -+ if (chans_available & od->cfg_data->chan_40bit_mask & -+ BIT(BCM2838_DMA_MEMCPY_CHAN)) { -+ memcpy_parent = od; -+ memcpy_chan = BCM2835_DMA_CHANIO(base, BCM2838_DMA_MEMCPY_CHAN); -+ memcpy_scb = dma_alloc_coherent(memcpy_parent->ddev.dev, -+ sizeof(*memcpy_scb), -+ &memcpy_scb_dma, GFP_KERNEL); -+ if (!memcpy_scb) -+ dev_warn(&pdev->dev, -+ "Failed to allocated memcpy scb\n"); - -- /* Grab channel 14 for the 40-bit DMA memcpy */ -- chans_available &= ~BIT(14); -- memcpy_chan = BCM2835_DMA_CHANIO(base, 14); -+ chans_available &= ~BIT(BCM2838_DMA_MEMCPY_CHAN); -+ } - - /* get irqs for each channel that we support */ -- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { -+ for (i = chan_start; i < chan_end; i++) { - /* skip masked out channels */ - if (!(chans_available & (1 << i))) { - irq[i] = -1; -@@ -1097,13 +1311,17 @@ static int bcm2835_dma_probe(struct plat - irq[i] = platform_get_irq(pdev, i < 11 ? i : 11); - } - -+ chan_count = 0; -+ - /* get irqs for each channel */ -- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { -+ for (i = chan_start; i < chan_end; i++) { - /* skip channels without irq */ - if (irq[i] < 0) - continue; - - /* check if there are other channels that also use this irq */ -+ /* FIXME: This will fail if interrupts are shared across -+ instances */ - irq_flags = 0; - for (j = 0; j <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; j++) - if ((i != j) && (irq[j] == irq[i])) { -@@ -1115,9 +1333,10 @@ static int bcm2835_dma_probe(struct plat - rc = bcm2835_dma_chan_init(od, i, irq[i], irq_flags); - if (rc) - goto err_no_dma; -+ chan_count++; - } - -- dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i); -+ dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", chan_count); - - /* Device-tree DMA controller registration */ - rc = of_dma_controller_register(pdev->dev.of_node, -@@ -1149,6 +1368,13 @@ static int bcm2835_dma_remove(struct pla - - bcm_dmaman_remove(pdev); - dma_async_device_unregister(&od->ddev); -+ if (memcpy_parent == od) { -+ dma_free_coherent(&pdev->dev, sizeof(*memcpy_scb), memcpy_scb, -+ memcpy_scb_dma); -+ memcpy_parent = NULL; -+ memcpy_scb = NULL; -+ memcpy_chan = NULL; -+ } - bcm2835_dma_free(od); - - return 0; ---- a/drivers/pci/controller/pcie-brcmstb-bounce.c -+++ b/drivers/pci/controller/pcie-brcmstb-bounce.c -@@ -91,7 +91,7 @@ struct dmabounce_device_info { - - static struct dmabounce_device_info *g_dmabounce_device_info; - --extern int bcm2838_dma40_memcpy_init(struct device *dev); -+extern int bcm2838_dma40_memcpy_init(void); - extern void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size); - - #ifdef STATS -@@ -471,9 +471,9 @@ static const struct dma_map_ops dmabounc - .mapping_error = dmabounce_mapping_error, - }; - --int brcm_pcie_bounce_register_dev(struct device *dev, -- unsigned long buffer_size, -- dma_addr_t threshold) -+int brcm_pcie_bounce_init(struct device *dev, -+ unsigned long buffer_size, -+ dma_addr_t threshold) - { - struct dmabounce_device_info *device_info; - int ret; -@@ -482,9 +482,9 @@ int brcm_pcie_bounce_register_dev(struct - if (g_dmabounce_device_info) - return -EBUSY; - -- ret = bcm2838_dma40_memcpy_init(dev); -+ ret = bcm2838_dma40_memcpy_init(); - if (ret) -- return ret; -+ return ret; - - device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC); - if (!device_info) { -@@ -515,9 +515,8 @@ int brcm_pcie_bounce_register_dev(struct - device_create_file(dev, &dev_attr_dmabounce_stats)); - - g_dmabounce_device_info = device_info; -- set_dma_ops(dev, &dmabounce_ops); - -- dev_info(dev, "dmabounce: registered device - %ld kB, threshold %pad\n", -+ dev_info(dev, "dmabounce: initialised - %ld kB, threshold %pad\n", - buffer_size / 1024, &threshold); - - return 0; -@@ -526,14 +525,13 @@ int brcm_pcie_bounce_register_dev(struct - kfree(device_info); - return ret; - } --EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); -+EXPORT_SYMBOL(brcm_pcie_bounce_init); - --void brcm_pcie_bounce_unregister_dev(struct device *dev) -+void brcm_pcie_bounce_uninit(struct device *dev) - { - struct dmabounce_device_info *device_info = g_dmabounce_device_info; - - g_dmabounce_device_info = NULL; -- set_dma_ops(dev, NULL); - - if (!device_info) { - dev_warn(dev, -@@ -554,10 +552,16 @@ void brcm_pcie_bounce_unregister_dev(str - device_remove_file(dev, &dev_attr_dmabounce_stats)); - - kfree(device_info); -+} -+EXPORT_SYMBOL(brcm_pcie_bounce_uninit); -+ -+int brcm_pcie_bounce_register_dev(struct device *dev) -+{ -+ set_dma_ops(dev, &dmabounce_ops); - -- dev_info(dev, "dmabounce: device unregistered\n"); -+ return 0; - } --EXPORT_SYMBOL(brcm_pcie_bounce_unregister_dev); -+EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); - - MODULE_AUTHOR("Phil Elwell "); - MODULE_DESCRIPTION("Dedicate DMA bounce support for pcie-brcmstb"); ---- a/drivers/pci/controller/pcie-brcmstb-bounce.h -+++ b/drivers/pci/controller/pcie-brcmstb-bounce.h -@@ -8,21 +8,26 @@ - - #ifdef CONFIG_ARM - --int brcm_pcie_bounce_register_dev(struct device *dev, unsigned long buffer_size, -- dma_addr_t threshold); -- --int brcm_pcie_bounce_unregister_dev(struct device *dev); -+int brcm_pcie_bounce_init(struct device *dev, unsigned long buffer_size, -+ dma_addr_t threshold); -+int brcm_pcie_bounce_uninit(struct device *dev); -+int brcm_pcie_bounce_register_dev(struct device *dev); - - #else - --static inline int brcm_pcie_bounce_register_dev(struct device *dev, -- unsigned long buffer_size, -- dma_addr_t threshold) -+static inline int brcm_pcie_bounce_init(struct device *dev, -+ unsigned long buffer_size, -+ dma_addr_t threshold) -+{ -+ return 0; -+} -+ -+static inline int brcm_pcie_bounce_uninit(struct device *dev) - { - return 0; - } - --static inline int brcm_pcie_bounce_unregister_dev(struct device *dev) -+static inline int brcm_pcie_bounce_register_dev(struct device *dev) - { - return 0; - } ---- a/drivers/pci/controller/pcie-brcmstb.c -+++ b/drivers/pci/controller/pcie-brcmstb.c -@@ -650,6 +650,7 @@ static void brcm_set_dma_ops(struct devi - - static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, - unsigned int val); -+ - static int brcmstb_platform_notifier(struct notifier_block *nb, - unsigned long event, void *__dev) - { -@@ -663,12 +664,11 @@ static int brcmstb_platform_notifier(str - strcmp(dev->kobj.name, rc_name)) { - int ret; - -- ret = brcm_pcie_bounce_register_dev(dev, bounce_buffer, -- (dma_addr_t)bounce_threshold); -+ ret = brcm_pcie_bounce_register_dev(dev); - if (ret) { - dev_err(dev, - "brcm_pcie_bounce_register_dev() failed: %d\n", -- ret); -+ ret); - return ret; - } - } -@@ -681,8 +681,6 @@ static int brcmstb_platform_notifier(str - brcm_pcie_perst_set(g_pcie, 1); - msleep(100); - brcm_pcie_perst_set(g_pcie, 0); -- } else if (max_pfn > (bounce_threshold/PAGE_SIZE)) { -- brcm_pcie_bounce_unregister_dev(dev); - } - return NOTIFY_OK; - -@@ -1718,6 +1716,7 @@ static int brcm_pcie_probe(struct platfo - void __iomem *base; - struct pci_host_bridge *bridge; - struct pci_bus *child; -+ extern unsigned long max_pfn; - - bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); - if (!bridge) -@@ -1753,6 +1752,20 @@ static int brcm_pcie_probe(struct platfo - if (IS_ERR(base)) - return PTR_ERR(base); - -+ /* To Do: Add hardware check if this ever gets fixed */ -+ if (max_pfn > (bounce_threshold/PAGE_SIZE)) { -+ int ret; -+ ret = brcm_pcie_bounce_init(&pdev->dev, bounce_buffer, -+ (dma_addr_t)bounce_threshold); -+ if (ret) { -+ if (ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, -+ "could not init bounce buffers: %d\n", -+ ret); -+ return ret; -+ } -+ } -+ - pcie->clk = of_clk_get_by_name(dn, "sw_pcie"); - if (IS_ERR(pcie->clk)) { - dev_warn(&pdev->dev, "could not get clock\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0643-overlays-dpi18-and-dpi24-vc4-compatibility.patch b/target/linux/brcm2708/patches-4.19/950-0643-overlays-dpi18-and-dpi24-vc4-compatibility.patch new file mode 100644 index 0000000000..0b3e8ec079 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0643-overlays-dpi18-and-dpi24-vc4-compatibility.patch @@ -0,0 +1,52 @@ +From a5e0d604116189331d5608c9d128f37df17db2e3 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 16 Jul 2019 15:24:12 +0100 +Subject: [PATCH] overlays: dpi18 and dpi24 vc4 compatibility + +The dpi overlays use the fb device tree node as a place to hang the +necessary pinctrl changes. With one of the VC4 overlays loaded, the +fb node is disabled so the changes have no effect. + +Modify the overlays to also use the vc4 node, to cover both use +cases. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/dpi18-overlay.dts | 8 ++++++++ + arch/arm/boot/dts/overlays/dpi24-overlay.dts | 8 ++++++++ + 2 files changed, 16 insertions(+) + +--- a/arch/arm/boot/dts/overlays/dpi18-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts +@@ -17,6 +17,14 @@ + }; + + fragment@1 { ++ target = <&vc4>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dpi18_pins>; ++ }; ++ }; ++ ++ fragment@2 { + target = <&gpio>; + __overlay__ { + dpi18_pins: dpi18_pins { +--- a/arch/arm/boot/dts/overlays/dpi24-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts +@@ -17,6 +17,14 @@ + }; + + fragment@1 { ++ target = <&vc4>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dpi24_pins>; ++ }; ++ }; ++ ++ fragment@2 { + target = <&gpio>; + __overlay__ { + dpi24_pins: dpi24_pins { diff --git a/target/linux/brcm2708/patches-4.19/950-0644-BCM270X_DT-Leave-bulk-channel-in-dma-channel-mask.patch b/target/linux/brcm2708/patches-4.19/950-0644-BCM270X_DT-Leave-bulk-channel-in-dma-channel-mask.patch deleted file mode 100644 index 157566aef2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0644-BCM270X_DT-Leave-bulk-channel-in-dma-channel-mask.patch +++ /dev/null @@ -1,27 +0,0 @@ -From db81536216256cdd4b8a17879e6628be47c74414 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 5 Jun 2019 21:32:03 +0100 -Subject: [PATCH 644/806] BCM270X_DT: Leave bulk channel in dma channel mask - -The updated bcm2835-dma driver does not require the BULK channel -to be removed from the set of available channels, as provided by -dma-channel-mask. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2708-rpi.dtsi | 4 ---- - 1 file changed, 4 deletions(-) - ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -124,10 +124,6 @@ - }; - }; - --&dma { -- brcm,dma-channel-mask = <0x7f34>; --}; -- - &hdmi { - power-domains = <&power RPI_POWER_DOMAIN_HDMI>; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0644-overlays-Add-i2c0-and-i2c1-for-regularity.patch b/target/linux/brcm2708/patches-4.19/950-0644-overlays-Add-i2c0-and-i2c1-for-regularity.patch new file mode 100644 index 0000000000..5b2c17bed7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0644-overlays-Add-i2c0-and-i2c1-for-regularity.patch @@ -0,0 +1,340 @@ +From 9c0f4b3e3b197d5c81f4bd6679f2c2456ab45c9e Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 17 Jul 2019 10:08:55 +0100 +Subject: [PATCH] overlays: Add i2c0 and i2c1 for regularity + +The new i2c overlays for pi4 (i2c3, i2c4, i2c5, i2c6) have a +standardised interface that allows pin groups to be chosen +atomically rather than as individual pins. Add i2c0 and i2c1 +overlays to fit the naming scheme and parameter usage, deprecating +i2c0-bcm2708 and i2c1-bcm2708. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 2 + + arch/arm/boot/dts/overlays/README | 33 +++++--- + .../dts/overlays/i2c0-bcm2708-overlay.dts | 77 +++---------------- + arch/arm/boot/dts/overlays/i2c0-overlay.dts | 61 +++++++++++++++ + .../dts/overlays/i2c1-bcm2708-overlay.dts | 46 ++--------- + arch/arm/boot/dts/overlays/i2c1-overlay.dts | 44 +++++++++++ + 6 files changed, 147 insertions(+), 116 deletions(-) + create mode 100644 arch/arm/boot/dts/overlays/i2c0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c1-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -66,7 +66,9 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + i2c-rtc.dtbo \ + i2c-rtc-gpio.dtbo \ + i2c-sensor.dtbo \ ++ i2c0.dtbo \ + i2c0-bcm2708.dtbo \ ++ i2c1.dtbo \ + i2c1-bcm2708.dtbo \ + i2c3.dtbo \ + i2c4.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1151,14 +1151,12 @@ Params: addr Set the + sensor + + +-Name: i2c0-bcm2708 ++Name: i2c0 + Info: Change i2c0 pin usage. Not all pin combinations are usable on all + platforms - platforms other then Compute Modules can only use this + to disable transaction combining. +-Load: dtoverlay=i2c0-bcm2708,= +-Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) +- scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) +- pins_0_1 Use pins 0 and 1 (default) ++Load: dtoverlay=i2c0,= ++Params: pins_0_1 Use pins 0 and 1 (default) + pins_28_29 Use pins 28 and 29 + pins_44_45 Use pins 44 and 45 + pins_46_47 Use pins 46 and 47 +@@ -1166,18 +1164,33 @@ Params: sda0_pin GPIO pin + "yes") + + +-Name: i2c1-bcm2708 ++Name: i2c0-bcm2708 ++Info: Deprecated, legacy version of i2c0, from which it inherits its ++ parameters, just adding the explicit individual pin specifiers. ++Load: ++Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) ++ scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) ++ ++ ++Name: i2c1 + Info: Change i2c1 pin usage. Not all pin combinations are usable on all + platforms - platforms other then Compute Modules can only use this + to disable transaction combining. +-Info: Enable the i2c_bcm2708 driver for the i2c1 bus +-Load: dtoverlay=i2c1-bcm2708,= ++Load: dtoverlay=i2c1,= ++Params: pins_2_3 Use pins 2 and 3 (default) ++ pins_44_45 Use pins 44 and 45 ++ combine Allow transactions to be combined (default ++ "yes") ++ ++ ++Name: i2c1-bcm2708 ++Info: Deprecated, legacy version of i2c1, from which it inherits its ++ parameters, just adding the explicit individual pin specifiers. ++Load: + Params: sda1_pin GPIO pin for SDA1 (2 or 44 - default 2) + scl1_pin GPIO pin for SCL1 (3 or 45 - default 3) + pin_func Alternative pin function (4 (alt0), 6 (alt2) - + default 4) +- combine Allow transactions to be combined (default +- "yes") + + + Name: i2c3 +--- a/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts +@@ -1,69 +1,14 @@ +-/* +- * Device tree overlay for i2c_bcm2708, i2c0 bus +- * +- * Compile: +- * dtc -@ -I dts -O dtb -o i2c0-bcm2708-overlay.dtb i2c0-bcm2708-overlay.dts +- */ +- +-/dts-v1/; +-/plugin/; ++#include "i2c0-overlay.dts" + + /{ +- compatible = "brcm,bcm2835"; +- +- fragment@0 { +- target = <&i2c0>; +- __overlay__ { +- status = "okay"; +- }; +- }; +- +- fragment@1 { +- target = <&i2c0_pins>; +- frag1: __overlay__ { +- brcm,pins = <0 1>; +- brcm,function = <4>; /* alt0 */ +- }; +- }; +- +- fragment@2 { +- target = <&i2c0_pins>; +- __dormant__ { +- brcm,pins = <28 29>; +- brcm,function = <4>; /* alt0 */ +- }; +- }; +- +- fragment@3 { +- target = <&i2c0_pins>; +- __dormant__ { +- brcm,pins = <44 45>; +- brcm,function = <5>; /* alt1 */ +- }; +- }; +- +- fragment@4 { +- target = <&i2c0_pins>; +- __dormant__ { +- brcm,pins = <46 47>; +- brcm,function = <4>; /* alt0 */ +- }; +- }; +- +- fragment@5 { +- target = <&i2c0>; +- __dormant__ { +- compatible = "brcm,bcm2708-i2c"; +- }; +- }; +- +- __overrides__ { +- sda0_pin = <&frag1>,"brcm,pins:0"; +- scl0_pin = <&frag1>,"brcm,pins:4"; +- pins_0_1 = <0>,"+1-2-3-4"; +- pins_28_29 = <0>,"-1+2-3-4"; +- pins_44_45 = <0>,"-1-2+3-4"; +- pins_46_47 = <0>,"-1-2-3+4"; +- combine = <0>, "!5"; +- }; ++ __overrides__ { ++ sda0_pin = <&pins1>,"brcm,pins:0", ++ <&pins2>,"brcm,pins:0", ++ <&pins3>,"brcm,pins:0", ++ <&pins4>,"brcm,pins:0"; ++ scl0_pin = <&pins1>,"brcm,pins:4", ++ <&pins2>,"brcm,pins:4", ++ <&pins3>,"brcm,pins:4", ++ <&pins4>,"brcm,pins:4"; ++ }; + }; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c0-overlay.dts +@@ -0,0 +1,61 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&i2c0>; ++ __overlay__ { ++ status = "okay"; ++ pinctrl-0 = <&i2c0_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c0_pins>; ++ pins1: __overlay__ { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c0_pins>; ++ pins2: __dormant__ { ++ brcm,pins = <28 29>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2c0_pins>; ++ pins3: __dormant__ { ++ brcm,pins = <44 45>; ++ brcm,function = <5>; /* alt1 */ ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&i2c0_pins>; ++ pins4: __dormant__ { ++ brcm,pins = <46 47>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&i2c0>; ++ __dormant__ { ++ compatible = "brcm,bcm2708-i2c"; ++ }; ++ }; ++ ++ __overrides__ { ++ pins_0_1 = <0>,"+1-2-3-4"; ++ pins_28_29 = <0>,"-1+2-3-4"; ++ pins_44_45 = <0>,"-1-2+3-4"; ++ pins_46_47 = <0>,"-1-2-3+4"; ++ combine = <0>, "!5"; ++ }; ++}; +--- a/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts +@@ -1,43 +1,9 @@ +-/* +- * Device tree overlay for i2c_bcm2708, i2c1 bus +- * +- * Compile: +- * dtc -@ -I dts -O dtb -o i2c1-bcm2708-overlay.dtb i2c1-bcm2708-overlay.dts +- */ +- +-/dts-v1/; +-/plugin/; ++#include "i2c1-overlay.dts" + + /{ +- compatible = "brcm,bcm2835"; +- +- fragment@0 { +- target = <&i2c1>; +- __overlay__ { +- pinctrl-0 = <&i2c1_pins>; +- status = "okay"; +- }; +- }; +- +- fragment@1 { +- target = <&i2c1_pins>; +- pins: __overlay__ { +- brcm,pins = <2 3>; +- brcm,function = <4>; /* alt 0 */ +- }; +- }; +- +- fragment@2 { +- target = <&i2c1>; +- __dormant__ { +- compatible = "brcm,bcm2708-i2c"; +- }; +- }; +- +- __overrides__ { +- sda1_pin = <&pins>,"brcm,pins:0"; +- scl1_pin = <&pins>,"brcm,pins:4"; +- pin_func = <&pins>,"brcm,function:0"; +- combine = <0>, "!2"; +- }; ++ __overrides__ { ++ sda1_pin = <&pins1>,"brcm,pins:0", <&pins2>,"brcm,pins:0"; ++ scl1_pin = <&pins1>,"brcm,pins:4", <&pins1>,"brcm,pins:4"; ++ pin_func = <&pins1>,"brcm,function:0", <&pins2>,"brcm,function:0"; ++ }; + }; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c1-overlay.dts +@@ -0,0 +1,44 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&i2c1>; ++ __overlay__ { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1_pins>; ++ pins1: __overlay__ { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; /* alt 0 */ ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1_pins>; ++ pins2: __dormant__ { ++ brcm,pins = <44 45>; ++ brcm,function = <6>; /* alt 2 */ ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2c1>; ++ __dormant__ { ++ compatible = "brcm,bcm2708-i2c"; ++ }; ++ }; ++ ++ __overrides__ { ++ pins_2_3 = <0>,"=1!2"; ++ pins_44_45 = <0>,"!1=2"; ++ combine = <0>, "!3"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0645-Pisound-Remove-spinlock-usage-around-spi_sync.patch b/target/linux/brcm2708/patches-4.19/950-0645-Pisound-Remove-spinlock-usage-around-spi_sync.patch new file mode 100644 index 0000000000..5dee4cb1d1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0645-Pisound-Remove-spinlock-usage-around-spi_sync.patch @@ -0,0 +1,31 @@ +From ace4e8240d581e6053f0165b2682a2db745d49dc Mon Sep 17 00:00:00 2001 +From: Giedrius +Date: Fri, 12 Jul 2019 17:45:55 +0300 +Subject: [PATCH] Pisound: Remove spinlock usage around spi_sync + +--- + sound/soc/bcm/pisound.c | 5 ----- + 1 file changed, 5 deletions(-) + +--- a/sound/soc/bcm/pisound.c ++++ b/sound/soc/bcm/pisound.c +@@ -286,9 +286,6 @@ static irqreturn_t data_available_interr + return IRQ_HANDLED; + } + +-static DEFINE_SPINLOCK(spilock); +-static unsigned long spilockflags; +- + static uint16_t spi_transfer16(uint16_t val) + { + uint8_t txbuf[2]; +@@ -333,9 +330,7 @@ static void spi_transfer(const uint8_t * + transfer.delay_usecs = 10; + spi_message_add_tail(&transfer, &msg); + +- spin_lock_irqsave(&spilock, spilockflags); + err = spi_sync(pisnd_spi_device, &msg); +- spin_unlock_irqrestore(&spilock, spilockflags); + + if (err < 0) { + printe("spi_sync error %d\n", err); diff --git a/target/linux/brcm2708/patches-4.19/950-0645-SQUASH-bcm2835-dma-Remove-debugging.patch b/target/linux/brcm2708/patches-4.19/950-0645-SQUASH-bcm2835-dma-Remove-debugging.patch deleted file mode 100644 index 11b4805b06..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0645-SQUASH-bcm2835-dma-Remove-debugging.patch +++ /dev/null @@ -1,45 +0,0 @@ -From eecf4b8568f0a0d6b90364299eed6b12ce63c245 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 6 Jun 2019 09:35:08 +0100 -Subject: [PATCH 645/806] SQUASH: bcm2835-dma: Remove debugging - -Signed-off-by: Phil Elwell ---- - drivers/dma/bcm2835-dma.c | 5 ----- - 1 file changed, 5 deletions(-) - ---- a/drivers/dma/bcm2835-dma.c -+++ b/drivers/dma/bcm2835-dma.c -@@ -584,8 +584,6 @@ static void bcm2835_dma_fill_cb_chain_wi - dma_addr_t addr; - struct scatterlist *sgent; - -- pr_err("dma_fill_chain_with_sg(ch %d, dir %d):\n", c->ch, direction); -- - max_len = bcm2835_dma_max_frame_length(c); - for_each_sg(sgl, sgent, sg_len, i) { - if (c->is_40bit_channel) { -@@ -603,7 +601,6 @@ static void bcm2835_dma_fill_cb_chain_wi - scb->srci = upper_32_bits(addr) | BCM2838_DMA40_INC; - } - scb->len = min(len, max_len); -- pr_err(" %llx, %x\n", (u64)addr, scb->len); - } - } else { - for (addr = sg_dma_address(sgent), -@@ -616,7 +613,6 @@ static void bcm2835_dma_fill_cb_chain_wi - else - cb->cb->src = addr; - cb->cb->length = min(len, max_len); -- pr_err(" %llx, %x\n", (u64)addr, cb->cb->length); - } - } - } -@@ -659,7 +655,6 @@ static void bcm2835_dma_start_desc(struc - struct virt_dma_desc *vd = vchan_next_desc(&c->vc); - struct bcm2835_desc *d; - -- pr_err("dma_start_desc(%px)\n", vd); - if (!vd) { - c->desc = NULL; - return; diff --git a/target/linux/brcm2708/patches-4.19/950-0646-arm64-mm-Limit-the-DMA-zone-for-arm64.patch b/target/linux/brcm2708/patches-4.19/950-0646-arm64-mm-Limit-the-DMA-zone-for-arm64.patch new file mode 100644 index 0000000000..41261cd0d1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0646-arm64-mm-Limit-the-DMA-zone-for-arm64.patch @@ -0,0 +1,25 @@ +From 2722f08c4c59901bd506184e2dcbbbd532aef0b3 Mon Sep 17 00:00:00 2001 +From: Andrei Gherzan +Date: Tue, 16 Jul 2019 13:28:22 +0100 +Subject: [PATCH] arm64/mm: Limit the DMA zone for arm64 + +On RaspberryPi, only the first 1Gb can be used for DMA[1]. + +[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2019-July/665986.html + +Signed-off-by: Andrei Gherzan +--- + arch/arm64/mm/init.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/mm/init.c ++++ b/arch/arm64/mm/init.c +@@ -224,7 +224,7 @@ static void __init reserve_elfcorehdr(vo + static phys_addr_t __init max_zone_dma_phys(void) + { + phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32); +- return min(offset + (1ULL << 32), memblock_end_of_DRAM()); ++ return min(offset + (1ULL << 30), memblock_end_of_DRAM()); + } + + #ifdef CONFIG_NUMA diff --git a/target/linux/brcm2708/patches-4.19/950-0647-drm-vc4-Query-firmware-for-custom-HDMI-mode.patch b/target/linux/brcm2708/patches-4.19/950-0647-drm-vc4-Query-firmware-for-custom-HDMI-mode.patch new file mode 100644 index 0000000000..00d0252deb --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0647-drm-vc4-Query-firmware-for-custom-HDMI-mode.patch @@ -0,0 +1,194 @@ +From 5620f5eda349027a6e00e23391bc59617d25b449 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 3 Jul 2019 17:44:53 +0100 +Subject: [PATCH] drm/vc4: Query firmware for custom HDMI mode + +Allow custom HDMI modes to be specified from config.txt, +and these then override EDID parsing. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 142 ++++++++++++++----------- + 1 file changed, 81 insertions(+), 61 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -1035,6 +1035,58 @@ vc4_fkms_connector_detect(struct drm_con + return connector_status_connected; + } + ++/* Queries the firmware to populate a drm_mode structure for this display */ ++static int vc4_fkms_get_fw_mode(struct vc4_fkms_connector *fkms_connector, ++ struct drm_display_mode *mode) ++{ ++ struct vc4_dev *vc4 = fkms_connector->vc4_dev; ++ struct set_timings timings = { 0 }; ++ int ret; ++ ++ timings.display = fkms_connector->display_number; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_GET_DISPLAY_TIMING, &timings, ++ sizeof(timings)); ++ if (ret || !timings.clock) ++ /* No mode returned - abort */ ++ return -1; ++ ++ /* Equivalent to DRM_MODE macro. */ ++ memset(mode, 0, sizeof(*mode)); ++ strncpy(mode->name, "FIXED_MODE", sizeof(mode->name)); ++ mode->status = 0; ++ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; ++ mode->clock = timings.clock; ++ mode->hdisplay = timings.hdisplay; ++ mode->hsync_start = timings.hsync_start; ++ mode->hsync_end = timings.hsync_end; ++ mode->htotal = timings.htotal; ++ mode->hskew = 0; ++ mode->vdisplay = timings.vdisplay; ++ mode->vsync_start = timings.vsync_start; ++ mode->vsync_end = timings.vsync_end; ++ mode->vtotal = timings.vtotal; ++ mode->vscan = timings.vscan; ++ ++ if (timings.flags & TIMINGS_FLAGS_H_SYNC_POS) ++ mode->flags |= DRM_MODE_FLAG_PHSYNC; ++ else ++ mode->flags |= DRM_MODE_FLAG_NHSYNC; ++ ++ if (timings.flags & TIMINGS_FLAGS_V_SYNC_POS) ++ mode->flags |= DRM_MODE_FLAG_PVSYNC; ++ else ++ mode->flags |= DRM_MODE_FLAG_NVSYNC; ++ ++ if (timings.flags & TIMINGS_FLAGS_INTERLACE) ++ mode->flags |= DRM_MODE_FLAG_INTERLACE; ++ ++ mode->base.type = DRM_MODE_OBJECT_MODE; ++ ++ return 0; ++} ++ + static int vc4_fkms_get_edid_block(void *data, u8 *buf, unsigned int block, + size_t len) + { +@@ -1063,30 +1115,40 @@ static int vc4_fkms_connector_get_modes( + to_vc4_fkms_connector(connector); + struct drm_encoder *encoder = fkms_connector->encoder; + struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); +- int ret = 0; ++ struct drm_display_mode fw_mode; ++ struct drm_display_mode *mode; + struct edid *edid; ++ int num_modes; + +- edid = drm_do_get_edid(connector, vc4_fkms_get_edid_block, +- fkms_connector); ++ if (!vc4_fkms_get_fw_mode(fkms_connector, &fw_mode)) { ++ drm_mode_debug_printmodeline(&fw_mode); ++ mode = drm_mode_duplicate(connector->dev, ++ &fw_mode); ++ drm_mode_probed_add(connector, mode); ++ num_modes = 1; /* 1 mode */ ++ } else { ++ edid = drm_do_get_edid(connector, vc4_fkms_get_edid_block, ++ fkms_connector); + +- /* FIXME: Can we do CEC? +- * cec_s_phys_addr_from_edid(vc4->hdmi->cec_adap, edid); +- * if (!edid) +- * return -ENODEV; +- */ +- +- vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid); +- +- if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { +- vc4_encoder->rgb_range_selectable = +- drm_rgb_quant_range_selectable(edid); ++ /* FIXME: Can we do CEC? ++ * cec_s_phys_addr_from_edid(vc4->hdmi->cec_adap, edid); ++ * if (!edid) ++ * return -ENODEV; ++ */ ++ ++ vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid); ++ ++ if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { ++ vc4_encoder->rgb_range_selectable = ++ drm_rgb_quant_range_selectable(edid); ++ } ++ ++ drm_connector_update_edid_property(connector, edid); ++ num_modes = drm_add_edid_modes(connector, edid); ++ kfree(edid); + } + +- drm_connector_update_edid_property(connector, edid); +- ret = drm_add_edid_modes(connector, edid); +- kfree(edid); +- +- return ret; ++ return num_modes; + } + + /* This is the DSI panel resolution. Use this as a default should the firmware +@@ -1104,57 +1166,15 @@ static int vc4_fkms_lcd_connector_get_mo + { + struct vc4_fkms_connector *fkms_connector = + to_vc4_fkms_connector(connector); +- struct vc4_dev *vc4 = fkms_connector->vc4_dev; + struct drm_display_mode *mode; +- struct mailbox_set_mode mb = { +- .tag1 = { RPI_FIRMWARE_GET_DISPLAY_TIMING, +- sizeof(struct set_timings), 0}, +- .timings = { .display = fkms_connector->display_number }, +- }; + struct drm_display_mode fw_mode; +- int ret = 0; +- +- ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); +- if (!ret) { +- /* Equivalent to DRM_MODE macro. */ +- memset(&fw_mode, 0, sizeof(fw_mode)); +- strncpy(fw_mode.name, "LCD_MODE", sizeof(fw_mode.name)); +- fw_mode.status = 0; +- fw_mode.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; +- fw_mode.clock = mb.timings.clock; +- fw_mode.hdisplay = mb.timings.hdisplay; +- fw_mode.hsync_start = mb.timings.hsync_start; +- fw_mode.hsync_end = mb.timings.hsync_end; +- fw_mode.htotal = mb.timings.htotal; +- fw_mode.hskew = 0; +- fw_mode.vdisplay = mb.timings.vdisplay; +- fw_mode.vsync_start = mb.timings.vsync_start; +- fw_mode.vsync_end = mb.timings.vsync_end; +- fw_mode.vtotal = mb.timings.vtotal; +- fw_mode.vscan = mb.timings.vscan; +- if (mb.timings.flags & TIMINGS_FLAGS_H_SYNC_POS) +- fw_mode.flags |= DRM_MODE_FLAG_PHSYNC; +- else +- fw_mode.flags |= DRM_MODE_FLAG_NHSYNC; +- if (mb.timings.flags & TIMINGS_FLAGS_V_SYNC_POS) +- fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; +- else +- fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; +- if (mb.timings.flags & TIMINGS_FLAGS_V_SYNC_POS) +- fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; +- else +- fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; +- if (mb.timings.flags & TIMINGS_FLAGS_INTERLACE) +- fw_mode.flags |= DRM_MODE_FLAG_INTERLACE; +- +- fw_mode.base.type = DRM_MODE_OBJECT_MODE; + ++ if (!vc4_fkms_get_fw_mode(fkms_connector, &fw_mode) && fw_mode.clock) + mode = drm_mode_duplicate(connector->dev, + &fw_mode); +- } else { ++ else + mode = drm_mode_duplicate(connector->dev, + &lcd_mode); +- } + + if (!mode) { + DRM_ERROR("Failed to create a new display mode\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0647-dts-Include-CSI-lane-config-for-csi1.patch b/target/linux/brcm2708/patches-4.19/950-0647-dts-Include-CSI-lane-config-for-csi1.patch deleted file mode 100644 index 0bca2ae787..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0647-dts-Include-CSI-lane-config-for-csi1.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 2fcb94a04778708b13b6d36390000e97063460e6 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 31 May 2019 17:57:26 +0100 -Subject: [PATCH 647/806] dts: Include CSI lane config for csi1 - -Without the include the peripheral is configured to have 0 -data lanes, which doesn't allow much data to be passed. - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2711.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,4-model-b", "brcm,bcm2838", "brcm,bcm2837"; diff --git a/target/linux/brcm2708/patches-4.19/950-0648-drm-vc4-Fix-T-format-modifiers-in-FKMS.patch b/target/linux/brcm2708/patches-4.19/950-0648-drm-vc4-Fix-T-format-modifiers-in-FKMS.patch deleted file mode 100644 index 4098d15e9b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0648-drm-vc4-Fix-T-format-modifiers-in-FKMS.patch +++ /dev/null @@ -1,28 +0,0 @@ -From ba21a5129def696c154c84df087f07bc748abe7d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 7 Jun 2019 11:31:21 +0100 -Subject: [PATCH 648/806] drm/vc4: Fix T-format modifiers in FKMS. - -The wrong vc_image formats were being checked for in the switch -statement. Correct these. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -458,10 +458,10 @@ static void vc4_plane_atomic_update(stru - switch (fb->modifier) { - case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: - switch (mb->plane.vc_image_type) { -- case VC_IMAGE_RGBX32: -+ case VC_IMAGE_XRGB8888: - mb->plane.vc_image_type = VC_IMAGE_TF_RGBX32; - break; -- case VC_IMAGE_RGBA32: -+ case VC_IMAGE_ARGB8888: - mb->plane.vc_image_type = VC_IMAGE_TF_RGBA32; - break; - case VC_IMAGE_RGB565: diff --git a/target/linux/brcm2708/patches-4.19/950-0648-drm-vc4-Pass-the-drm-vrefresh-to-the-firmware-on-mod.patch b/target/linux/brcm2708/patches-4.19/950-0648-drm-vc4-Pass-the-drm-vrefresh-to-the-firmware-on-mod.patch new file mode 100644 index 0000000000..9f5b9e14a0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0648-drm-vc4-Pass-the-drm-vrefresh-to-the-firmware-on-mod.patch @@ -0,0 +1,37 @@ +From 2c0bfade955e4e660941db287020d06c9e22267f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 11 Jul 2019 15:12:05 +0100 +Subject: [PATCH] drm/vc4: Pass the drm vrefresh to the firmware on + mode set + +More for completeness than need, but use drm_mode_vrefresh +to compute the vrefresh value, and pass that down to the +firmware on mode set. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -737,8 +737,8 @@ static void vc4_crtc_mode_set_nofb(struc + mode->hdisplay, mode->hsync_start, mode->hsync_end, + mode->htotal, mode->hskew, mode->vdisplay, + mode->vsync_start, mode->vsync_end, mode->vtotal, +- mode->vscan, mode->vrefresh, mode->picture_aspect_ratio, +- mode->flags); ++ mode->vscan, drm_mode_vrefresh(mode), ++ mode->picture_aspect_ratio, mode->flags); + mb.timings.display = vc4_crtc->display_number; + + mb.timings.video_id_code = frame.avi.video_code; +@@ -754,7 +754,7 @@ static void vc4_crtc_mode_set_nofb(struc + mb.timings.vsync_end = mode->vsync_end; + mb.timings.vtotal = mode->vtotal; + mb.timings.vscan = mode->vscan; +- mb.timings.vrefresh = 0; ++ mb.timings.vrefresh = drm_mode_vrefresh(mode); + mb.timings.flags = 0; + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + mb.timings.flags |= TIMINGS_FLAGS_H_SYNC_POS; diff --git a/target/linux/brcm2708/patches-4.19/950-0649-overlays-audremap-Support-GPIOs-18-19.patch b/target/linux/brcm2708/patches-4.19/950-0649-overlays-audremap-Support-GPIOs-18-19.patch new file mode 100644 index 0000000000..667e104b47 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0649-overlays-audremap-Support-GPIOs-18-19.patch @@ -0,0 +1,68 @@ +From f42cc245e1f3e586f1a26550e5760489b6c329ab Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 23 Jul 2019 12:55:07 +0100 +Subject: [PATCH] overlays: audremap: Support GPIOs 18 & 19 + +PWM audio can also be used on GPIOs 18 and 19, so add the pins_18_19 +parameter to select that location. pins_12_13 explicitly chooses GPIOs +12 and 13, although this is the default behaviour so is there only for +completeness. + +See: https://github.com/raspberrypi/firmware/issues/1178 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 4 +++- + arch/arm/boot/dts/overlays/audremap-overlay.dts | 16 ++++++++++++++++ + 2 files changed, 19 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -475,12 +475,14 @@ Params: + + + Name: audremap +-Info: Switches PWM sound output to pins 12 (Right) & 13 (Left) ++Info: Switches PWM sound output to GPIOs on the 40-pin header + Load: dtoverlay=audremap,= + Params: swap_lr Reverse the channel allocation, which will also + swap the audio jack outputs (default off) + enable_jack Don't switch off the audio jack output + (default off) ++ pins_12_13 Select GPIOs 12 & 13 (default) ++ pins_18_19 Select GPIOs 18 & 19 + + + Name: balena-fin +--- a/arch/arm/boot/dts/overlays/audremap-overlay.dts ++++ b/arch/arm/boot/dts/overlays/audremap-overlay.dts +@@ -7,13 +7,29 @@ + fragment@0 { + target = <&audio_pins>; + frag0: __overlay__ { ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&audio_pins>; ++ __overlay__ { + brcm,pins = < 12 13 >; + brcm,function = < 4 >; /* alt0 alt0 */ + }; + }; + ++ fragment@2 { ++ target = <&audio_pins>; ++ __dormant__ { ++ brcm,pins = < 18 19 >; ++ brcm,function = < 2 >; /* alt5 alt5 */ ++ }; ++ }; ++ + __overrides__ { + swap_lr = <&frag0>, "swap_lr?"; + enable_jack = <&frag0>, "enable_jack?"; ++ pins_12_13 = <0>,"+1-2"; ++ pins_18_19 = <0>,"-1+2"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0650-bcm2711-dts-Disable-the-v3d-node-by-default.patch b/target/linux/brcm2708/patches-4.19/950-0650-bcm2711-dts-Disable-the-v3d-node-by-default.patch deleted file mode 100644 index 935aa157a4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0650-bcm2711-dts-Disable-the-v3d-node-by-default.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 27fc1dbeee2a58abcb80ffc1c8f161d3abfeac9a Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 10 Jun 2019 17:22:44 +0100 -Subject: [PATCH 650/806] bcm2711 dts: Disable the v3d node by default - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2711.dtsi | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/bcm2711.dtsi -+++ b/arch/arm/boot/dts/bcm2711.dtsi -@@ -13,6 +13,10 @@ - }; - }; - -+&v3d { -+ status = "disabled"; -+}; -+ - &dma { - brcm,dma-channel-mask = <0x7ef5>; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0650-drm-connector-Fix-drm_mode_create_tv_properties-doc.patch b/target/linux/brcm2708/patches-4.19/950-0650-drm-connector-Fix-drm_mode_create_tv_properties-doc.patch new file mode 100644 index 0000000000..8cc04b78d9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0650-drm-connector-Fix-drm_mode_create_tv_properties-doc.patch @@ -0,0 +1,29 @@ +From ce5c3d732efb5e3da50119ed876f0d6661f08b84 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 6 Dec 2018 15:24:35 +0100 +Subject: [PATCH] drm/connector: Fix drm_mode_create_tv_properties() + doc + +Commit eda6887f1961e0d2fb866b1a520b2de5b3828de5 upstream. + +The in the kernel-doc header did not match the function name. + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Acked-by: Daniel Vetter +Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-2-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/drm_connector.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/drm_connector.c ++++ b/drivers/gpu/drm/drm_connector.c +@@ -1110,7 +1110,7 @@ void drm_hdmi_avi_infoframe_content_type + EXPORT_SYMBOL(drm_hdmi_avi_infoframe_content_type); + + /** +- * drm_create_tv_properties - create TV specific connector properties ++ * drm_mode_create_tv_properties - create TV specific connector properties + * @dev: DRM device + * @num_modes: number of different TV formats (modes) supported + * @modes: array of pointers to strings containing name of each format diff --git a/target/linux/brcm2708/patches-4.19/950-0651-drm-connector-Clarify-the-unit-of-TV-margins.patch b/target/linux/brcm2708/patches-4.19/950-0651-drm-connector-Clarify-the-unit-of-TV-margins.patch new file mode 100644 index 0000000000..85b56a3511 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0651-drm-connector-Clarify-the-unit-of-TV-margins.patch @@ -0,0 +1,58 @@ +From 4589a8a086094061e7476d41578e31349accc190 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 6 Dec 2018 15:24:36 +0100 +Subject: [PATCH] drm/connector: Clarify the unit of TV margins + +Commit 56406e15b5e83256151ef74eb1a219cbf13d91c8 upstream. + +All margins are expressed in pixels. Clarify that in the doc. + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Acked-by: Daniel Vetter +Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-3-boris.brezillon@bootlin.com +--- + include/drm/drm_connector.h | 2 +- + include/drm/drm_mode_config.h | 8 ++++---- + 2 files changed, 5 insertions(+), 5 deletions(-) + +--- a/include/drm/drm_connector.h ++++ b/include/drm/drm_connector.h +@@ -346,7 +346,7 @@ int drm_display_info_set_bus_formats(str + /** + * struct drm_tv_connector_state - TV connector related states + * @subconnector: selected subconnector +- * @margins: margins ++ * @margins: margins (all margins are expressed in pixels) + * @margins.left: left margin + * @margins.right: right margin + * @margins.top: top margin +--- a/include/drm/drm_mode_config.h ++++ b/include/drm/drm_mode_config.h +@@ -668,22 +668,22 @@ struct drm_mode_config { + struct drm_property *tv_mode_property; + /** + * @tv_left_margin_property: Optional TV property to set the left +- * margin. ++ * margin (expressed in pixels). + */ + struct drm_property *tv_left_margin_property; + /** + * @tv_right_margin_property: Optional TV property to set the right +- * margin. ++ * margin (expressed in pixels). + */ + struct drm_property *tv_right_margin_property; + /** + * @tv_top_margin_property: Optional TV property to set the right +- * margin. ++ * margin (expressed in pixels). + */ + struct drm_property *tv_top_margin_property; + /** + * @tv_bottom_margin_property: Optional TV property to set the right +- * margin. ++ * margin (expressed in pixels). + */ + struct drm_property *tv_bottom_margin_property; + /** diff --git a/target/linux/brcm2708/patches-4.19/950-0651-drm-vc4-Remove-340MHz-clock-limit-from-FKMS-now-scra.patch b/target/linux/brcm2708/patches-4.19/950-0651-drm-vc4-Remove-340MHz-clock-limit-from-FKMS-now-scra.patch deleted file mode 100644 index 44e63de562..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0651-drm-vc4-Remove-340MHz-clock-limit-from-FKMS-now-scra.patch +++ /dev/null @@ -1,29 +0,0 @@ -From d4a180e5b67c3ca9b8559d4f926f22b6c6705082 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 10 Jun 2019 16:32:51 +0100 -Subject: [PATCH 651/806] drm/vc4: Remove 340MHz clock limit from FKMS now - scrambling issues resolved - -Firmware TMDS scrambling is now being correctly configured, so -we can use it. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 ------ - 1 file changed, 6 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -830,12 +830,6 @@ vc4_crtc_mode_valid(struct drm_crtc *crt - break; - } - -- /* Limit the pixel clock until we can get dynamic HDMI 2.0 scrambling -- * working. -- */ -- if (mode->clock > 340000) -- return MODE_CLOCK_HIGH; -- - return MODE_OK; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0652-Revert-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.patch b/target/linux/brcm2708/patches-4.19/950-0652-Revert-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.patch deleted file mode 100644 index 6ea178b5be..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0652-Revert-usb-xhci-hack-xhci_urb_enqueue-to-support-hid.patch +++ /dev/null @@ -1,113 +0,0 @@ -From 5f6feeaf528cf922a82f11e5b0711f5fe9d7538d Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Fri, 7 Jun 2019 14:50:12 +0100 -Subject: [PATCH 652/806] Revert "usb: xhci: hack xhci_urb_enqueue to support - hid.mousepoll behaviour" - -This reverts commit 1cf1071a79f320bc4497a3ade77431f04442eb17. ---- - drivers/usb/host/xhci.c | 86 ----------------------------------------- - 1 file changed, 86 deletions(-) - ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -1425,87 +1425,6 @@ command_cleanup: - } - - /* -- * RPI: Fixup endpoint intervals when requested -- * - Check interval versus the (cached) endpoint context -- * - set the endpoint interval to the new value -- * - force an endpoint configure command -- */ --static void xhci_fixup_interval(struct xhci_hcd *xhci, struct urb *urb, -- unsigned int slot_id, unsigned int ep_index) --{ -- struct xhci_ep_ctx *ep_ctx_out, *ep_ctx_in; -- struct xhci_command *command; -- struct xhci_input_control_ctx *ctrl_ctx; -- struct xhci_virt_device *vdev; -- int xhci_interval, ep_interval; -- int ret; -- unsigned long flags; -- u32 ep_info_tmp; -- -- spin_lock_irqsave(&xhci->lock, flags); -- -- vdev = xhci->devs[slot_id]; -- /* Get context-derived endpoint interval */ -- ep_ctx_out = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index); -- ep_ctx_in = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index); -- xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx_out->ep_info)); -- ep_interval = urb->interval * 8; -- -- if (ep_interval == xhci_interval) { -- spin_unlock_irqrestore(&xhci->lock, flags); -- return; -- } -- -- xhci_dbg(xhci, "Fixup interval ep_interval=%d xhci_interval=%d\n", -- ep_interval, xhci_interval); -- command = xhci_alloc_command_with_ctx(xhci, true, GFP_ATOMIC); -- if (!command) { -- /* Failure here is benign, poll at the original rate */ -- spin_unlock_irqrestore(&xhci->lock, flags); -- return; -- } -- -- /* xHCI uses exponents for intervals... */ -- xhci_interval = fls(ep_interval) - 1; -- xhci_interval = clamp_val(xhci_interval, 3, 10); -- ep_info_tmp = le32_to_cpu(ep_ctx_out->ep_info); -- ep_info_tmp &= ~EP_INTERVAL(255); -- ep_info_tmp |= EP_INTERVAL(xhci_interval); -- -- /* Keep the endpoint context up-to-date while issuing the command. */ -- xhci_endpoint_copy(xhci, vdev->in_ctx, -- vdev->out_ctx, ep_index); -- ep_ctx_in->ep_info = cpu_to_le32(ep_info_tmp); -- -- /* -- * We need to drop the lock, so take an explicit copy -- * of the ep context. -- */ -- xhci_endpoint_copy(xhci, command->in_ctx, vdev->in_ctx, ep_index); -- -- ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); -- if (!ctrl_ctx) { -- xhci_warn(xhci, -- "%s: Could not get input context, bad type.\n", -- __func__); -- spin_unlock_irqrestore(&xhci->lock, flags); -- xhci_free_command(xhci, command); -- return; -- } -- ctrl_ctx->add_flags = xhci_get_endpoint_flag_from_index(ep_index); -- ctrl_ctx->drop_flags = 0; -- -- spin_unlock_irqrestore(&xhci->lock, flags); -- -- ret = xhci_configure_endpoint(xhci, urb->dev, command, -- false, false); -- if (ret) -- xhci_warn(xhci, "%s: Configure endpoint failed: %d\n", -- __func__, ret); -- xhci_free_command(xhci, command); --} -- --/* - * non-error returns are a promise to giveback() the urb later - * we drop ownership so next owner (or urb unlink) can get it - */ -@@ -1573,11 +1492,6 @@ static int xhci_urb_enqueue(struct usb_h - } - } - -- if (usb_endpoint_xfer_int(&urb->ep->desc) && -- (urb->dev->speed == USB_SPEED_FULL || -- urb->dev->speed == USB_SPEED_LOW)) -- xhci_fixup_interval(xhci, urb, slot_id, ep_index); -- - spin_lock_irqsave(&xhci->lock, flags); - - if (xhci->xhc_state & XHCI_STATE_DYING) { diff --git a/target/linux/brcm2708/patches-4.19/950-0652-drm-connector-Allow-creation-of-margin-props-alone.patch b/target/linux/brcm2708/patches-4.19/950-0652-drm-connector-Allow-creation-of-margin-props-alone.patch new file mode 100644 index 0000000000..1b242f46e3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0652-drm-connector-Allow-creation-of-margin-props-alone.patch @@ -0,0 +1,136 @@ +From 4f2277b18d6bbb6fac50b751c4e513619849b23c Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 6 Dec 2018 15:24:37 +0100 +Subject: [PATCH] drm/connector: Allow creation of margin props alone + +Commit 6c4f52dca36f5e3e2354c30591d38e92f4657ed9 upstream. + +TV margins properties can only be added as part of the SDTV TV +connector properties creation, but we might need those props for HDMI +TVs too, so let's move the margins props creation in a separate +function and expose it to drivers. + +We also add an helper to attach margins props to a connector. + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Acked-by: Daniel Vetter +Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-4-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/drm_connector.c | 83 ++++++++++++++++++++++++++------- + include/drm/drm_connector.h | 2 + + 2 files changed, 67 insertions(+), 18 deletions(-) + +--- a/drivers/gpu/drm/drm_connector.c ++++ b/drivers/gpu/drm/drm_connector.c +@@ -1110,6 +1110,70 @@ void drm_hdmi_avi_infoframe_content_type + EXPORT_SYMBOL(drm_hdmi_avi_infoframe_content_type); + + /** ++ * drm_mode_attach_tv_margin_properties - attach TV connector margin properties ++ * @connector: DRM connector ++ * ++ * Called by a driver when it needs to attach TV margin props to a connector. ++ * Typically used on SDTV and HDMI connectors. ++ */ ++void drm_connector_attach_tv_margin_properties(struct drm_connector *connector) ++{ ++ struct drm_device *dev = connector->dev; ++ ++ drm_object_attach_property(&connector->base, ++ dev->mode_config.tv_left_margin_property, ++ 0); ++ drm_object_attach_property(&connector->base, ++ dev->mode_config.tv_right_margin_property, ++ 0); ++ drm_object_attach_property(&connector->base, ++ dev->mode_config.tv_top_margin_property, ++ 0); ++ drm_object_attach_property(&connector->base, ++ dev->mode_config.tv_bottom_margin_property, ++ 0); ++} ++EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties); ++ ++/** ++ * drm_mode_create_tv_margin_properties - create TV connector margin properties ++ * @dev: DRM device ++ * ++ * Called by a driver's HDMI connector initialization routine, this function ++ * creates the TV margin properties for a given device. No need to call this ++ * function for an SDTV connector, it's already called from ++ * drm_mode_create_tv_properties(). ++ */ ++int drm_mode_create_tv_margin_properties(struct drm_device *dev) ++{ ++ if (dev->mode_config.tv_left_margin_property) ++ return 0; ++ ++ dev->mode_config.tv_left_margin_property = ++ drm_property_create_range(dev, 0, "left margin", 0, 100); ++ if (!dev->mode_config.tv_left_margin_property) ++ return -ENOMEM; ++ ++ dev->mode_config.tv_right_margin_property = ++ drm_property_create_range(dev, 0, "right margin", 0, 100); ++ if (!dev->mode_config.tv_right_margin_property) ++ return -ENOMEM; ++ ++ dev->mode_config.tv_top_margin_property = ++ drm_property_create_range(dev, 0, "top margin", 0, 100); ++ if (!dev->mode_config.tv_top_margin_property) ++ return -ENOMEM; ++ ++ dev->mode_config.tv_bottom_margin_property = ++ drm_property_create_range(dev, 0, "bottom margin", 0, 100); ++ if (!dev->mode_config.tv_bottom_margin_property) ++ return -ENOMEM; ++ ++ return 0; ++} ++EXPORT_SYMBOL(drm_mode_create_tv_margin_properties); ++ ++/** + * drm_mode_create_tv_properties - create TV specific connector properties + * @dev: DRM device + * @num_modes: number of different TV formats (modes) supported +@@ -1155,24 +1219,7 @@ int drm_mode_create_tv_properties(struct + /* + * Other, TV specific properties: margins & TV modes. + */ +- dev->mode_config.tv_left_margin_property = +- drm_property_create_range(dev, 0, "left margin", 0, 100); +- if (!dev->mode_config.tv_left_margin_property) +- goto nomem; +- +- dev->mode_config.tv_right_margin_property = +- drm_property_create_range(dev, 0, "right margin", 0, 100); +- if (!dev->mode_config.tv_right_margin_property) +- goto nomem; +- +- dev->mode_config.tv_top_margin_property = +- drm_property_create_range(dev, 0, "top margin", 0, 100); +- if (!dev->mode_config.tv_top_margin_property) +- goto nomem; +- +- dev->mode_config.tv_bottom_margin_property = +- drm_property_create_range(dev, 0, "bottom margin", 0, 100); +- if (!dev->mode_config.tv_bottom_margin_property) ++ if (drm_mode_create_tv_margin_properties(dev)) + goto nomem; + + dev->mode_config.tv_mode_property = +--- a/include/drm/drm_connector.h ++++ b/include/drm/drm_connector.h +@@ -1175,9 +1175,11 @@ const char *drm_get_tv_select_name(int v + const char *drm_get_content_protection_name(int val); + + int drm_mode_create_dvi_i_properties(struct drm_device *dev); ++int drm_mode_create_tv_margin_properties(struct drm_device *dev); + int drm_mode_create_tv_properties(struct drm_device *dev, + unsigned int num_modes, + const char * const modes[]); ++void drm_connector_attach_tv_margin_properties(struct drm_connector *conn); + int drm_mode_create_scaling_mode_property(struct drm_device *dev); + int drm_connector_attach_content_type_property(struct drm_connector *dev); + int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, diff --git a/target/linux/brcm2708/patches-4.19/950-0653-drm-vc4-Take-margin-setup-into-account-when-updating.patch b/target/linux/brcm2708/patches-4.19/950-0653-drm-vc4-Take-margin-setup-into-account-when-updating.patch new file mode 100644 index 0000000000..a50be7a986 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0653-drm-vc4-Take-margin-setup-into-account-when-updating.patch @@ -0,0 +1,185 @@ +From 0d592a7685e41d0bb1816a4fedb11d3570474417 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 6 Dec 2018 15:24:38 +0100 +Subject: [PATCH] drm/vc4: Take margin setup into account when updating + planes + +Commit 666e73587f90f42d90385c1bea1009a650bf73f4 upstream. + +Applyin margins is just a matter of scaling all planes appropriately +and adjusting the CRTC X/Y offset to account for the +left/right/top/bottom borders. + +Create a vc4_plane_margins_adj() function doing that and call it from +vc4_plane_setup_clipping_and_scaling() so that we are ready to attach +margins properties to the HDMI connector. + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Acked-by: Daniel Vetter +Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-5-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 43 +++++++++++++++++++++++++++ + drivers/gpu/drm/vc4/vc4_drv.h | 3 ++ + drivers/gpu/drm/vc4/vc4_plane.c | 51 +++++++++++++++++++++++++++++++++ + 3 files changed, 97 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -48,6 +48,13 @@ struct vc4_crtc_state { + struct drm_mm_node mm; + bool feed_txp; + bool txp_armed; ++ ++ struct { ++ unsigned int left; ++ unsigned int right; ++ unsigned int top; ++ unsigned int bottom; ++ } margins; + }; + + static inline struct vc4_crtc_state * +@@ -623,6 +630,37 @@ static enum drm_mode_status vc4_crtc_mod + return MODE_OK; + } + ++void vc4_crtc_get_margins(struct drm_crtc_state *state, ++ unsigned int *left, unsigned int *right, ++ unsigned int *top, unsigned int *bottom) ++{ ++ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state); ++ struct drm_connector_state *conn_state; ++ struct drm_connector *conn; ++ int i; ++ ++ *left = vc4_state->margins.left; ++ *right = vc4_state->margins.right; ++ *top = vc4_state->margins.top; ++ *bottom = vc4_state->margins.bottom; ++ ++ /* We have to interate over all new connector states because ++ * vc4_crtc_get_margins() might be called before ++ * vc4_crtc_atomic_check() which means margins info in vc4_crtc_state ++ * might be outdated. ++ */ ++ for_each_new_connector_in_state(state->state, conn, conn_state, i) { ++ if (conn_state->crtc != state->crtc) ++ continue; ++ ++ *left = conn_state->tv.margins.left; ++ *right = conn_state->tv.margins.right; ++ *top = conn_state->tv.margins.top; ++ *bottom = conn_state->tv.margins.bottom; ++ break; ++ } ++} ++ + static int vc4_crtc_atomic_check(struct drm_crtc *crtc, + struct drm_crtc_state *state) + { +@@ -670,6 +708,10 @@ static int vc4_crtc_atomic_check(struct + vc4_state->feed_txp = false; + } + ++ vc4_state->margins.left = conn_state->tv.margins.left; ++ vc4_state->margins.right = conn_state->tv.margins.right; ++ vc4_state->margins.top = conn_state->tv.margins.top; ++ vc4_state->margins.bottom = conn_state->tv.margins.bottom; + break; + } + +@@ -971,6 +1013,7 @@ static struct drm_crtc_state *vc4_crtc_d + + old_vc4_state = to_vc4_crtc_state(crtc->state); + vc4_state->feed_txp = old_vc4_state->feed_txp; ++ vc4_state->margins = old_vc4_state->margins; + + __drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base); + return &vc4_state->base; +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -705,6 +705,9 @@ bool vc4_crtc_get_scanoutpos(struct drm_ + const struct drm_display_mode *mode); + void vc4_crtc_handle_vblank(struct vc4_crtc *crtc); + void vc4_crtc_txp_armed(struct drm_crtc_state *state); ++void vc4_crtc_get_margins(struct drm_crtc_state *state, ++ unsigned int *right, unsigned int *left, ++ unsigned int *top, unsigned int *bottom); + + /* vc4_debugfs.c */ + int vc4_debugfs_init(struct drm_minor *minor); +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -258,6 +258,52 @@ static u32 vc4_get_scl_field(struct drm_ + } + } + ++static int vc4_plane_margins_adj(struct drm_plane_state *pstate) ++{ ++ struct vc4_plane_state *vc4_pstate = to_vc4_plane_state(pstate); ++ unsigned int left, right, top, bottom, adjhdisplay, adjvdisplay; ++ struct drm_crtc_state *crtc_state; ++ ++ crtc_state = drm_atomic_get_new_crtc_state(pstate->state, ++ pstate->crtc); ++ ++ vc4_crtc_get_margins(crtc_state, &left, &right, &top, &bottom); ++ if (!left && !right && !top && !bottom) ++ return 0; ++ ++ if (left + right >= crtc_state->mode.hdisplay || ++ top + bottom >= crtc_state->mode.vdisplay) ++ return -EINVAL; ++ ++ adjhdisplay = crtc_state->mode.hdisplay - (left + right); ++ vc4_pstate->crtc_x = DIV_ROUND_CLOSEST(vc4_pstate->crtc_x * ++ adjhdisplay, ++ crtc_state->mode.hdisplay); ++ vc4_pstate->crtc_x += left; ++ if (vc4_pstate->crtc_x > crtc_state->mode.hdisplay - left) ++ vc4_pstate->crtc_x = crtc_state->mode.hdisplay - left; ++ ++ adjvdisplay = crtc_state->mode.vdisplay - (top + bottom); ++ vc4_pstate->crtc_y = DIV_ROUND_CLOSEST(vc4_pstate->crtc_y * ++ adjvdisplay, ++ crtc_state->mode.vdisplay); ++ vc4_pstate->crtc_y += top; ++ if (vc4_pstate->crtc_y > crtc_state->mode.vdisplay - top) ++ vc4_pstate->crtc_y = crtc_state->mode.vdisplay - top; ++ ++ vc4_pstate->crtc_w = DIV_ROUND_CLOSEST(vc4_pstate->crtc_w * ++ adjhdisplay, ++ crtc_state->mode.hdisplay); ++ vc4_pstate->crtc_h = DIV_ROUND_CLOSEST(vc4_pstate->crtc_h * ++ adjvdisplay, ++ crtc_state->mode.vdisplay); ++ ++ if (!vc4_pstate->crtc_w || !vc4_pstate->crtc_h) ++ return -EINVAL; ++ ++ return 0; ++} ++ + static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) + { + struct drm_plane *plane = state->plane; +@@ -269,6 +315,7 @@ static int vc4_plane_setup_clipping_and_ + int num_planes = fb->format->num_planes; + u32 h_subsample = 1; + u32 v_subsample = 1; ++ int ret; + int i; + + for (i = 0; i < num_planes; i++) +@@ -292,6 +339,10 @@ static int vc4_plane_setup_clipping_and_ + vc4_state->crtc_w = state->crtc_w; + vc4_state->crtc_h = state->crtc_h; + ++ ret = vc4_plane_margins_adj(state); ++ if (ret) ++ return ret; ++ + vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0], + vc4_state->crtc_w); + vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0], diff --git a/target/linux/brcm2708/patches-4.19/950-0653-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch b/target/linux/brcm2708/patches-4.19/950-0653-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch deleted file mode 100644 index 25faf7a7b5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0653-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch +++ /dev/null @@ -1,104 +0,0 @@ -From f9c01b35ec7ea3f981c414af38c92c508487671a Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Tue, 11 Jun 2019 10:55:00 +0100 -Subject: [PATCH 653/806] usb: add plumbing for updating interrupt endpoint - interval state - -xHCI caches device and endpoint data after the interface is configured, -so an explicit command needs to be issued for any device driver wanting -to alter the polling interval of an endpoint. - -Add usb_fixup_endpoint() to allow drivers to do this. The fixup must be -called after calculating endpoint bandwidth requirements but before any -URBs are submitted. - -If polling intervals are shortened, any bandwidth reservations are no -longer valid but in practice polling intervals are only ever relaxed. - -Limit the scope to interrupt transfers for now. - -Signed-off-by: Jonathan Bell ---- - drivers/usb/core/hcd.c | 10 ++++++++++ - drivers/usb/core/message.c | 15 +++++++++++++++ - include/linux/usb.h | 2 ++ - include/linux/usb/hcd.h | 7 +++++++ - 4 files changed, 34 insertions(+) - ---- a/drivers/usb/core/hcd.c -+++ b/drivers/usb/core/hcd.c -@@ -2071,6 +2071,16 @@ reset: - return ret; - } - -+void usb_hcd_fixup_endpoint(struct usb_device *udev, -+ struct usb_host_endpoint *ep, int interval) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = bus_to_hcd(udev->bus); -+ if (hcd->driver->fixup_endpoint) -+ hcd->driver->fixup_endpoint(hcd, udev, ep, interval); -+} -+ - /* Disables the endpoint: synchronizes with the hcd to make sure all - * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must - * have been called previously. Use for set_configuration, set_interface, ---- a/drivers/usb/core/message.c -+++ b/drivers/usb/core/message.c -@@ -1113,6 +1113,21 @@ static void remove_intf_ep_devs(struct u - intf->ep_devs_created = 0; - } - -+void usb_fixup_endpoint(struct usb_device *dev, int epaddr, int interval) -+{ -+ unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; -+ struct usb_host_endpoint *ep; -+ -+ if (usb_endpoint_out(epaddr)) -+ ep = dev->ep_out[epnum]; -+ else -+ ep = dev->ep_in[epnum]; -+ -+ if (ep && usb_endpoint_xfer_int(&ep->desc)) -+ usb_hcd_fixup_endpoint(dev, ep, interval); -+} -+EXPORT_SYMBOL_GPL(usb_fixup_endpoint); -+ - /** - * usb_disable_endpoint -- Disable an endpoint by address - * @dev: the device whose endpoint is being disabled ---- a/include/linux/usb.h -+++ b/include/linux/usb.h -@@ -1809,6 +1809,8 @@ extern int usb_clear_halt(struct usb_dev - extern int usb_reset_configuration(struct usb_device *dev); - extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); - extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr); -+extern void usb_fixup_endpoint(struct usb_device *dev, int epaddr, -+ int interval); - - /* this request isn't really synchronous, but it belongs with the others */ - extern int usb_driver_set_configuration(struct usb_device *udev, int config); ---- a/include/linux/usb/hcd.h -+++ b/include/linux/usb/hcd.h -@@ -379,6 +379,11 @@ struct hc_driver { - * or bandwidth constraints. - */ - void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); -+ /* Override the endpoint-derived interval -+ * (if there is any cached hardware state). -+ */ -+ void (*fixup_endpoint)(struct usb_hcd *hcd, struct usb_device *udev, -+ struct usb_host_endpoint *ep, int interval); - /* Returns the hardware-chosen device address */ - int (*address_device)(struct usb_hcd *, struct usb_device *udev); - /* prepares the hardware to send commands to the device */ -@@ -435,6 +440,8 @@ extern void usb_hcd_unmap_urb_setup_for_ - extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *); - extern void usb_hcd_flush_endpoint(struct usb_device *udev, - struct usb_host_endpoint *ep); -+extern void usb_hcd_fixup_endpoint(struct usb_device *udev, -+ struct usb_host_endpoint *ep, int interval); - extern void usb_hcd_disable_endpoint(struct usb_device *udev, - struct usb_host_endpoint *ep); - extern void usb_hcd_reset_endpoint(struct usb_device *udev, diff --git a/target/linux/brcm2708/patches-4.19/950-0654-drm-vc4-Attach-margin-props-to-the-HDMI-connector.patch b/target/linux/brcm2708/patches-4.19/950-0654-drm-vc4-Attach-margin-props-to-the-HDMI-connector.patch new file mode 100644 index 0000000000..906caba71e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0654-drm-vc4-Attach-margin-props-to-the-HDMI-connector.patch @@ -0,0 +1,71 @@ +From efd1df5cd92e4436f863730f666117494613693b Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 6 Dec 2018 15:24:39 +0100 +Subject: [PATCH] drm/vc4: Attach margin props to the HDMI connector + +Commit db999538fdb0679629d90652f8a1437df1e85a7d upstream. + +Now that the plane code takes the margins setup into account, we can +safely attach margin props to the HDMI connector. + +We also take care of filling AVI infoframes correctly to expose the +top/botton/left/right bar. + +Note that those margin props match pretty well the +overscan_{left,right,top,bottom} properties defined in config.txt and +parsed by the VC4 firmware. + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Acked-by: Daniel Vetter +Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-6-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -310,6 +310,7 @@ static struct drm_connector *vc4_hdmi_co + { + struct drm_connector *connector; + struct vc4_hdmi_connector *hdmi_connector; ++ int ret; + + hdmi_connector = devm_kzalloc(dev->dev, sizeof(*hdmi_connector), + GFP_KERNEL); +@@ -323,6 +324,13 @@ static struct drm_connector *vc4_hdmi_co + DRM_MODE_CONNECTOR_HDMIA); + drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs); + ++ /* Create and attach TV margin props to this connector. */ ++ ret = drm_mode_create_tv_margin_properties(dev); ++ if (ret) ++ return ERR_PTR(ret); ++ ++ drm_connector_attach_tv_margin_properties(connector); ++ + connector->polled = (DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT); + +@@ -408,6 +416,9 @@ static void vc4_hdmi_write_infoframe(str + static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder) + { + struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder); ++ struct vc4_dev *vc4 = encoder->dev->dev_private; ++ struct vc4_hdmi *hdmi = vc4->hdmi; ++ struct drm_connector_state *cstate = hdmi->connector->state; + struct drm_crtc *crtc = encoder->crtc; + const struct drm_display_mode *mode = &crtc->state->adjusted_mode; + union hdmi_infoframe frame; +@@ -426,6 +437,11 @@ static void vc4_hdmi_set_avi_infoframe(s + vc4_encoder->rgb_range_selectable, + false); + ++ frame.avi.right_bar = cstate->tv.margins.right; ++ frame.avi.left_bar = cstate->tv.margins.left; ++ frame.avi.top_bar = cstate->tv.margins.top; ++ frame.avi.bottom_bar = cstate->tv.margins.bottom; ++ + vc4_hdmi_write_infoframe(encoder, &frame); + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0654-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch b/target/linux/brcm2708/patches-4.19/950-0654-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch deleted file mode 100644 index ffcb9ba41f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0654-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch +++ /dev/null @@ -1,129 +0,0 @@ -From 903af89ac9a9b82b6e736ab04e3848672a0ab364 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Tue, 11 Jun 2019 11:33:39 +0100 -Subject: [PATCH 654/806] xhci: implement xhci_fixup_endpoint for interval - adjustments - -Must be called in a non-atomic context, after the endpoint -has been registered with the hardware via xhci_add_endpoint -and before the first URB is submitted for the endpoint. - -Signed-off-by: Jonathan Bell ---- - drivers/usb/host/xhci.c | 98 +++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 98 insertions(+) - ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -1425,6 +1425,103 @@ command_cleanup: - } - - /* -+ * RPI: Fixup endpoint intervals when requested -+ * - Check interval versus the (cached) endpoint context -+ * - set the endpoint interval to the new value -+ * - force an endpoint configure command -+ * XXX: bandwidth is not recalculated. We should probably do that. -+ */ -+static void xhci_fixup_endpoint(struct usb_hcd *hcd, struct usb_device *udev, -+ struct usb_host_endpoint *ep, int interval) -+{ -+ struct xhci_hcd *xhci; -+ struct xhci_ep_ctx *ep_ctx_out, *ep_ctx_in; -+ struct xhci_command *command; -+ struct xhci_input_control_ctx *ctrl_ctx; -+ struct xhci_virt_device *vdev; -+ int xhci_interval; -+ int ret; -+ int ep_index; -+ unsigned long flags; -+ u32 ep_info_tmp; -+ -+ xhci = hcd_to_xhci(hcd); -+ ep_index = xhci_get_endpoint_index(&ep->desc); -+ -+ /* FS/LS interval translations */ -+ if ((udev->speed == USB_SPEED_FULL || -+ udev->speed == USB_SPEED_LOW)) -+ interval *= 8; -+ -+ mutex_lock(&xhci->mutex); -+ -+ spin_lock_irqsave(&xhci->lock, flags); -+ -+ vdev = xhci->devs[udev->slot_id]; -+ /* Get context-derived endpoint interval */ -+ ep_ctx_out = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index); -+ ep_ctx_in = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index); -+ xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx_out->ep_info)); -+ -+ if (interval == xhci_interval) { -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ mutex_unlock(&xhci->mutex); -+ return; -+ } -+ -+ xhci_dbg(xhci, "Fixup interval=%d xhci_interval=%d\n", -+ interval, xhci_interval); -+ command = xhci_alloc_command_with_ctx(xhci, true, GFP_ATOMIC); -+ if (!command) { -+ /* Failure here is benign, poll at the original rate */ -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ mutex_unlock(&xhci->mutex); -+ return; -+ } -+ -+ /* xHCI uses exponents for intervals... */ -+ xhci_interval = fls(interval) - 1; -+ xhci_interval = clamp_val(xhci_interval, 3, 10); -+ ep_info_tmp = le32_to_cpu(ep_ctx_out->ep_info); -+ ep_info_tmp &= ~EP_INTERVAL(255); -+ ep_info_tmp |= EP_INTERVAL(xhci_interval); -+ -+ /* Keep the endpoint context up-to-date while issuing the command. */ -+ xhci_endpoint_copy(xhci, vdev->in_ctx, -+ vdev->out_ctx, ep_index); -+ ep_ctx_in->ep_info = cpu_to_le32(ep_info_tmp); -+ -+ /* -+ * We need to drop the lock, so take an explicit copy -+ * of the ep context. -+ */ -+ xhci_endpoint_copy(xhci, command->in_ctx, vdev->in_ctx, ep_index); -+ -+ ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); -+ if (!ctrl_ctx) { -+ xhci_warn(xhci, -+ "%s: Could not get input context, bad type.\n", -+ __func__); -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ xhci_free_command(xhci, command); -+ mutex_unlock(&xhci->mutex); -+ return; -+ } -+ ctrl_ctx->add_flags = xhci_get_endpoint_flag_from_index(ep_index); -+ ctrl_ctx->drop_flags = 0; -+ -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ -+ ret = xhci_configure_endpoint(xhci, udev, command, -+ false, false); -+ if (ret) -+ xhci_warn(xhci, "%s: Configure endpoint failed: %d\n", -+ __func__, ret); -+ xhci_free_command(xhci, command); -+ mutex_unlock(&xhci->mutex); -+} -+ -+/* - * non-error returns are a promise to giveback() the urb later - * we drop ownership so next owner (or urb unlink) can get it - */ -@@ -5217,6 +5314,7 @@ static const struct hc_driver xhci_hc_dr - .endpoint_reset = xhci_endpoint_reset, - .check_bandwidth = xhci_check_bandwidth, - .reset_bandwidth = xhci_reset_bandwidth, -+ .fixup_endpoint = xhci_fixup_endpoint, - .address_device = xhci_address_device, - .enable_device = xhci_enable_device, - .update_hub_device = xhci_update_hub_device, diff --git a/target/linux/brcm2708/patches-4.19/950-0655-drm-vc4-Add-support-for-margins-to-fkms.patch b/target/linux/brcm2708/patches-4.19/950-0655-drm-vc4-Add-support-for-margins-to-fkms.patch new file mode 100644 index 0000000000..12f1606db0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0655-drm-vc4-Add-support-for-margins-to-fkms.patch @@ -0,0 +1,328 @@ +From a4e8051901a5d858a69732a3f9734835afc00af5 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 19 Jul 2019 15:35:13 +0100 +Subject: [PATCH] drm/vc4: Add support for margins to fkms + +Allows for overscan to be configured under FKMS. +NB This is rescaling the planes, not reducing the size of the +display mode. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 241 +++++++++++++++++++------ + 1 file changed, 190 insertions(+), 51 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -256,6 +256,23 @@ static inline struct vc4_crtc *to_vc4_cr + return container_of(crtc, struct vc4_crtc, base); + } + ++struct vc4_crtc_state { ++ struct drm_crtc_state base; ++ ++ struct { ++ unsigned int left; ++ unsigned int right; ++ unsigned int top; ++ unsigned int bottom; ++ } margins; ++}; ++ ++static inline struct vc4_crtc_state * ++to_vc4_crtc_state(struct drm_crtc_state *crtc_state) ++{ ++ return (struct vc4_crtc_state *)crtc_state; ++} ++ + struct vc4_fkms_encoder { + struct drm_encoder base; + bool hdmi_monitor; +@@ -365,17 +382,127 @@ static int vc4_plane_set_blank(struct dr + return ret; + } + ++static void vc4_fkms_crtc_get_margins(struct drm_crtc_state *state, ++ unsigned int *left, unsigned int *right, ++ unsigned int *top, unsigned int *bottom) ++{ ++ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state); ++ struct drm_connector_state *conn_state; ++ struct drm_connector *conn; ++ int i; ++ ++ *left = vc4_state->margins.left; ++ *right = vc4_state->margins.right; ++ *top = vc4_state->margins.top; ++ *bottom = vc4_state->margins.bottom; ++ ++ /* We have to interate over all new connector states because ++ * vc4_fkms_crtc_get_margins() might be called before ++ * vc4_fkms_crtc_atomic_check() which means margins info in ++ * vc4_crtc_state might be outdated. ++ */ ++ for_each_new_connector_in_state(state->state, conn, conn_state, i) { ++ if (conn_state->crtc != state->crtc) ++ continue; ++ ++ *left = conn_state->tv.margins.left; ++ *right = conn_state->tv.margins.right; ++ *top = conn_state->tv.margins.top; ++ *bottom = conn_state->tv.margins.bottom; ++ break; ++ } ++} ++ ++static int vc4_fkms_margins_adj(struct drm_plane_state *pstate, ++ struct set_plane *plane) ++{ ++ unsigned int left, right, top, bottom; ++ int adjhdisplay, adjvdisplay; ++ struct drm_crtc_state *crtc_state; ++ ++ crtc_state = drm_atomic_get_new_crtc_state(pstate->state, ++ pstate->crtc); ++ ++ vc4_fkms_crtc_get_margins(crtc_state, &left, &right, &top, &bottom); ++ ++ if (!left && !right && !top && !bottom) ++ return 0; ++ ++ if (left + right >= crtc_state->mode.hdisplay || ++ top + bottom >= crtc_state->mode.vdisplay) ++ return -EINVAL; ++ ++ adjhdisplay = crtc_state->mode.hdisplay - (left + right); ++ plane->dst_x = DIV_ROUND_CLOSEST(plane->dst_x * adjhdisplay, ++ (int)crtc_state->mode.hdisplay); ++ plane->dst_x += left; ++ if (plane->dst_x > (int)(crtc_state->mode.hdisplay - left)) ++ plane->dst_x = crtc_state->mode.hdisplay - left; ++ ++ adjvdisplay = crtc_state->mode.vdisplay - (top + bottom); ++ plane->dst_y = DIV_ROUND_CLOSEST(plane->dst_y * adjvdisplay, ++ (int)crtc_state->mode.vdisplay); ++ plane->dst_y += top; ++ if (plane->dst_y > (int)(crtc_state->mode.vdisplay - top)) ++ plane->dst_y = crtc_state->mode.vdisplay - top; ++ ++ plane->dst_w = DIV_ROUND_CLOSEST(plane->dst_w * adjhdisplay, ++ crtc_state->mode.hdisplay); ++ plane->dst_h = DIV_ROUND_CLOSEST(plane->dst_h * adjvdisplay, ++ crtc_state->mode.vdisplay); ++ ++ if (!plane->dst_w || !plane->dst_h) ++ return -EINVAL; ++ ++ return 0; ++} ++ + static void vc4_plane_atomic_update(struct drm_plane *plane, + struct drm_plane_state *old_state) + { + struct drm_plane_state *state = plane->state; ++ ++ /* ++ * Do NOT set now, as we haven't checked if the crtc is active or not. ++ * Set from vc4_plane_set_blank instead. ++ * ++ * If the CRTC is on (or going to be on) and we're enabled, ++ * then unblank. Otherwise, stay blank until CRTC enable. ++ */ ++ if (state->crtc->state->active) ++ vc4_plane_set_blank(plane, false); ++} ++ ++static void vc4_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct drm_plane_state *state = plane->state; ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n", ++ plane->base.id, plane->name, ++ state->crtc_w, ++ state->crtc_h, ++ vc4_plane->mb.plane.vc_image_type, ++ state->crtc_x, ++ state->crtc_y); ++ vc4_plane_set_blank(plane, true); ++} ++ ++static bool plane_enabled(struct drm_plane_state *state) ++{ ++ return state->fb && state->crtc; ++} ++ ++static int vc4_plane_to_mb(struct drm_plane *plane, ++ struct mailbox_set_plane *mb, ++ struct drm_plane_state *state) ++{ + struct drm_framebuffer *fb = state->fb; + struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); + const struct drm_format_info *drm_fmt = fb->format; + const struct vc_image_format *vc_fmt = + vc4_get_vc_image_fmt(drm_fmt->format); +- struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); +- struct mailbox_set_plane *mb = &vc4_plane->mb; + int num_planes = fb->format->num_planes; + struct drm_display_mode *mode = &state->crtc->mode; + unsigned int rotation = SUPPORTED_ROTATIONS; +@@ -417,25 +544,7 @@ static void vc4_plane_atomic_update(stru + break; + } + +- /* FIXME: If the dest rect goes off screen then clip the src rect so we +- * don't have off-screen pixels. +- */ +- if (plane->type == DRM_PLANE_TYPE_CURSOR) { +- /* There is no scaling on the cursor plane, therefore the calcs +- * to alter the source crop as the cursor goes off the screen +- * are simple. +- */ +- if (mb->plane.dst_x + mb->plane.dst_w > mode->hdisplay) { +- mb->plane.dst_w = mode->hdisplay - mb->plane.dst_x; +- mb->plane.src_w = (mode->hdisplay - mb->plane.dst_x) +- << 16; +- } +- if (mb->plane.dst_y + mb->plane.dst_h > mode->vdisplay) { +- mb->plane.dst_h = mode->vdisplay - mb->plane.dst_y; +- mb->plane.src_h = (mode->vdisplay - mb->plane.dst_y) +- << 16; +- } +- } ++ vc4_fkms_margins_adj(state, &mb->plane); + + if (num_planes > 1) { + /* Assume this must be YUV */ +@@ -525,38 +634,19 @@ static void vc4_plane_atomic_update(stru + state->alpha, + state->normalized_zpos); + +- /* +- * Do NOT set now, as we haven't checked if the crtc is active or not. +- * Set from vc4_plane_set_blank instead. +- * +- * If the CRTC is on (or going to be on) and we're enabled, +- * then unblank. Otherwise, stay blank until CRTC enable. +- */ +- if (state->crtc->state->active) +- vc4_plane_set_blank(plane, false); ++ return 0; + } + +-static void vc4_plane_atomic_disable(struct drm_plane *plane, +- struct drm_plane_state *old_state) ++static int vc4_plane_atomic_check(struct drm_plane *plane, ++ struct drm_plane_state *state) + { +- //struct vc4_dev *vc4 = to_vc4_dev(plane->dev); +- struct drm_plane_state *state = plane->state; + struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); + +- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n", +- plane->base.id, plane->name, +- state->crtc_w, +- state->crtc_h, +- vc4_plane->mb.plane.vc_image_type, +- state->crtc_x, +- state->crtc_y); +- vc4_plane_set_blank(plane, true); +-} ++ if (!plane_enabled(state)) ++ return 0; ++ ++ return vc4_plane_to_mb(plane, &vc4_plane->mb, state); + +-static int vc4_plane_atomic_check(struct drm_plane *plane, +- struct drm_plane_state *state) +-{ +- return 0; + } + + static void vc4_plane_destroy(struct drm_plane *plane) +@@ -878,8 +968,23 @@ vc4_crtc_mode_valid(struct drm_crtc *crt + static int vc4_crtc_atomic_check(struct drm_crtc *crtc, + struct drm_crtc_state *state) + { +- DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", +- crtc->base.id); ++ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state); ++ struct drm_connector *conn; ++ struct drm_connector_state *conn_state; ++ int i; ++ ++ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", crtc->base.id); ++ ++ for_each_new_connector_in_state(state->state, conn, conn_state, i) { ++ if (conn_state->crtc != crtc) ++ continue; ++ ++ vc4_state->margins.left = conn_state->tv.margins.left; ++ vc4_state->margins.right = conn_state->tv.margins.right; ++ vc4_state->margins.top = conn_state->tv.margins.top; ++ vc4_state->margins.bottom = conn_state->tv.margins.bottom; ++ break; ++ } + return 0; + } + +@@ -980,6 +1085,33 @@ static int vc4_page_flip(struct drm_crtc + return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx); + } + ++static struct drm_crtc_state * ++vc4_crtc_duplicate_state(struct drm_crtc *crtc) ++{ ++ struct vc4_crtc_state *vc4_state, *old_vc4_state; ++ ++ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL); ++ if (!vc4_state) ++ return NULL; ++ ++ old_vc4_state = to_vc4_crtc_state(crtc->state); ++ vc4_state->margins = old_vc4_state->margins; ++ ++ __drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base); ++ return &vc4_state->base; ++} ++ ++static void ++vc4_crtc_reset(struct drm_crtc *crtc) ++{ ++ if (crtc->state) ++ __drm_atomic_helper_crtc_destroy_state(crtc->state); ++ ++ crtc->state = kzalloc(sizeof(*crtc->state), GFP_KERNEL); ++ if (crtc->state) ++ crtc->state->crtc = crtc; ++} ++ + static int vc4_fkms_enable_vblank(struct drm_crtc *crtc) + { + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); +@@ -1007,8 +1139,8 @@ static const struct drm_crtc_funcs vc4_c + .set_property = NULL, + .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ + .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ +- .reset = drm_atomic_helper_crtc_reset, +- .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, ++ .reset = vc4_crtc_reset, ++ .atomic_duplicate_state = vc4_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, + .enable_vblank = vc4_fkms_enable_vblank, + .disable_vblank = vc4_fkms_disable_vblank, +@@ -1267,6 +1399,13 @@ vc4_fkms_connector_init(struct drm_devic + connector->interlace_allowed = 0; + } + ++ /* Create and attach TV margin props to this connector. */ ++ ret = drm_mode_create_tv_margin_properties(dev); ++ if (ret) ++ return ERR_PTR(ret); ++ ++ drm_connector_attach_tv_margin_properties(connector); ++ + connector->polled = (DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT); + diff --git a/target/linux/brcm2708/patches-4.19/950-0655-usbhid-call-usb_fixup_endpoint-after-mangling-interv.patch b/target/linux/brcm2708/patches-4.19/950-0655-usbhid-call-usb_fixup_endpoint-after-mangling-interv.patch deleted file mode 100644 index 2fa7e317dc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0655-usbhid-call-usb_fixup_endpoint-after-mangling-interv.patch +++ /dev/null @@ -1,23 +0,0 @@ -From f2c46d48d1aa0f7b87b179434162eac6624122f7 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Tue, 11 Jun 2019 11:42:03 +0100 -Subject: [PATCH 655/806] usbhid: call usb_fixup_endpoint after mangling - intervals - -Lets the mousepoll override mechanism work with xhci. - -Signed-off-by: Jonathan Bell ---- - drivers/hid/usbhid/hid-core.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/hid/usbhid/hid-core.c -+++ b/drivers/hid/usbhid/hid-core.c -@@ -1118,6 +1118,7 @@ static int usbhid_start(struct hid_devic - interval = hid_kbpoll_interval; - break; - } -+ usb_fixup_endpoint(dev, endpoint->bEndpointAddress, interval); - - ret = -ENOMEM; - if (usb_endpoint_dir_in(endpoint)) { diff --git a/target/linux/brcm2708/patches-4.19/950-0656-drm-vc4-Add-status-of-which-display-is-updated-throu.patch b/target/linux/brcm2708/patches-4.19/950-0656-drm-vc4-Add-status-of-which-display-is-updated-throu.patch deleted file mode 100644 index c477a3c50d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0656-drm-vc4-Add-status-of-which-display-is-updated-throu.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 77ae227664bc2460a5341be765044d0b8fb184ac Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 4 Jun 2019 12:14:30 +0100 -Subject: [PATCH 656/806] drm: vc4: Add status of which display is updated - through vblank - -Previously multiple displays were slaved off the same SMI -interrupt, triggered by HVS channel 1 (HDMI0). -This doesn't work if you only have a DPI or DSI screen (HVS channel -0), and gives slightly erroneous results with dual HDMI as the -events for HDMI1 are incorrect. - -Use SMIDSW0 and SMIDSW1 registers to denote which display has -triggered the vblank. -Handling should be backwards compatible with older firmware. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 41 ++++++++++++++++++++++---- - 1 file changed, 36 insertions(+), 5 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -230,8 +230,13 @@ static const struct vc_image_format *vc4 - * hardware, which has only this one register. - */ - #define SMICS 0x0 -+#define SMIDSW0 0x14 -+#define SMIDSW1 0x1C - #define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) - -+/* Flag to denote that the firmware is giving multiple display callbacks */ -+#define SMI_NEW 0xabcd0000 -+ - #define vc4_crtc vc4_kms_crtc - #define to_vc4_crtc to_vc4_kms_crtc - struct vc4_crtc { -@@ -884,16 +889,42 @@ static irqreturn_t vc4_crtc_irq_handler( - int i; - u32 stat = readl(crtc_list[0]->regs + SMICS); - irqreturn_t ret = IRQ_NONE; -+ u32 chan; - - if (stat & SMICS_INTERRUPTS) { - writel(0, crtc_list[0]->regs + SMICS); - -- for (i = 0; crtc_list[i]; i++) { -- if (crtc_list[i]->vblank_enabled) -- drm_crtc_handle_vblank(&crtc_list[i]->base); -- vc4_crtc_handle_page_flip(crtc_list[i]); -- ret = IRQ_HANDLED; -+ chan = readl(crtc_list[0]->regs + SMIDSW0); -+ -+ if ((chan & 0xFFFF0000) != SMI_NEW) { -+ /* Older firmware. Treat the one interrupt as vblank/ -+ * complete for all crtcs. -+ */ -+ for (i = 0; crtc_list[i]; i++) { -+ if (crtc_list[i]->vblank_enabled) -+ drm_crtc_handle_vblank(&crtc_list[i]->base); -+ vc4_crtc_handle_page_flip(crtc_list[i]); -+ } -+ } else { -+ if (chan & 1) { -+ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW0); -+ if (crtc_list[0]->vblank_enabled) -+ drm_crtc_handle_vblank(&crtc_list[0]->base); -+ vc4_crtc_handle_page_flip(crtc_list[0]); -+ } -+ -+ /* Check for the secondary display too */ -+ chan = readl(crtc_list[0]->regs + SMIDSW1); -+ -+ if (chan & 1) { -+ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW1); -+ if (crtc_list[1]->vblank_enabled) -+ drm_crtc_handle_vblank(&crtc_list[1]->base); -+ vc4_crtc_handle_page_flip(crtc_list[1]); -+ } - } -+ -+ ret = IRQ_HANDLED; - } - - return ret; diff --git a/target/linux/brcm2708/patches-4.19/950-0656-drm-vc4-Ensure-zpos-is-always-initialised.patch b/target/linux/brcm2708/patches-4.19/950-0656-drm-vc4-Ensure-zpos-is-always-initialised.patch new file mode 100644 index 0000000000..bd13a32d2f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0656-drm-vc4-Ensure-zpos-is-always-initialised.patch @@ -0,0 +1,26 @@ +From cf80e05ebb55c121c1567ac42b9e1a885fc346a3 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 19 Jul 2019 17:49:00 +0100 +Subject: [PATCH] drm/vc4: Ensure zpos is always initialised + +The compiler is warning that default_zpos can be used +uninitialised as there is no default case to catch all plane +types. +No other plane types should ever be presented to vc4_fkms_plane_init, +but add a default case regardless. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -773,6 +773,7 @@ static struct drm_plane *vc4_fkms_plane_ + * other layers as requested by KMS. + */ + switch (type) { ++ default: + case DRM_PLANE_TYPE_PRIMARY: + default_zpos = 0; + break; diff --git a/target/linux/brcm2708/patches-4.19/950-0657-drm-vc4-In-FKMS-look-at-the-modifiers-correctly-for-.patch b/target/linux/brcm2708/patches-4.19/950-0657-drm-vc4-In-FKMS-look-at-the-modifiers-correctly-for-.patch deleted file mode 100644 index 8434033b32..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0657-drm-vc4-In-FKMS-look-at-the-modifiers-correctly-for-.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 5643e47700d3c1b2a8a1aca56629f12e90df407c Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 12 Jun 2019 17:13:21 +0100 -Subject: [PATCH 657/806] drm/vc4: In FKMS look at the modifiers correctly for - SAND - -Incorrect masking was used in the switch for the modifier, -therefore for SAND (which puts the column pitch in the -modifier) it didn't match. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -460,7 +460,7 @@ static void vc4_plane_atomic_update(stru - } - mb->plane.planes[3] = 0; - -- switch (fb->modifier) { -+ switch (fourcc_mod_broadcom_mod(fb->modifier)) { - case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: - switch (mb->plane.vc_image_type) { - case VC_IMAGE_XRGB8888: -@@ -476,6 +476,9 @@ static void vc4_plane_atomic_update(stru - break; - case DRM_FORMAT_MOD_BROADCOM_SAND128: - mb->plane.vc_image_type = VC_IMAGE_YUV_UV; -+ /* Note that the column pitch is passed across in lines, not -+ * bytes. -+ */ - mb->plane.pitch = fourcc_mod_broadcom_param(fb->modifier); - break; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0657-dts-bcm2838-add-missing-properties-for-pmu-and-gic-n.patch b/target/linux/brcm2708/patches-4.19/950-0657-dts-bcm2838-add-missing-properties-for-pmu-and-gic-n.patch new file mode 100644 index 0000000000..553c16c9dd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0657-dts-bcm2838-add-missing-properties-for-pmu-and-gic-n.patch @@ -0,0 +1,45 @@ +From a78d4d81c585a5de61e7fc7d574e6e3f769c18a6 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Wed, 24 Jul 2019 14:36:53 +0100 +Subject: [PATCH] dts: bcm2838: add missing properties for pmu and gic + nodes + +The GIC has a virtual interface maintenance interrupt and the PMU +interrupts need affinity mappings as they are wired to generic SPIs. + +Also, delete incorrect PMU compatible string. + +Signed-off-by: Jonathan Bell +--- + arch/arm/boot/dts/bcm2838.dtsi | 9 ++++----- + 1 file changed, 4 insertions(+), 5 deletions(-) + +--- a/arch/arm/boot/dts/bcm2838.dtsi ++++ b/arch/arm/boot/dts/bcm2838.dtsi +@@ -35,6 +35,8 @@ + <0x40042000 0x2000>, + <0x40044000 0x2000>, + <0x40046000 0x2000>; ++ interrupts = ; + }; + + thermal: thermal@7d5d2200 { +@@ -222,15 +224,12 @@ + }; + + arm-pmu { +- /* +- * N.B. the A72 PMU support only exists in arch/arm64, hence +- * the fallback to the A53 version. +- */ +- compatible = "arm,cortex-a72-pmu", "arm,cortex-a53-pmu"; ++ compatible = "arm,cortex-a72-pmu"; + interrupts = , + , + , + ; ++ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { diff --git a/target/linux/brcm2708/patches-4.19/950-0658-adds-the-Hifiberry-DAC-ADC-PRO-version.patch b/target/linux/brcm2708/patches-4.19/950-0658-adds-the-Hifiberry-DAC-ADC-PRO-version.patch new file mode 100644 index 0000000000..427053d2dc --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0658-adds-the-Hifiberry-DAC-ADC-PRO-version.patch @@ -0,0 +1,701 @@ +From bab5f8832c6b2859caea1cb5af1ffcb6276c2f74 Mon Sep 17 00:00:00 2001 +From: Joerg Schambacher +Date: Tue, 23 Jul 2019 16:57:35 +0200 +Subject: [PATCH] adds the Hifiberry DAC+ADC PRO version + +This adds the driver for the DAC+ADC PRO version of the Hifiberry soundcard with software controlled PCM1863 ADC +Signed-off-by: Joerg Schambacher joerg@i2audio.com +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 21 + + .../hifiberry-dacplusadcpro-overlay.dts | 64 +++ + sound/soc/bcm/Kconfig | 8 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/hifiberry_dacplusadcpro.c | 538 ++++++++++++++++++ + 9 files changed, 637 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts + create mode 100644 sound/soc/bcm/hifiberry_dacplusadcpro.c + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -53,6 +53,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + hifiberry-dac.dtbo \ + hifiberry-dacplus.dtbo \ + hifiberry-dacplusadc.dtbo \ ++ hifiberry-dacplusadcpro.dtbo \ + hifiberry-digi.dtbo \ + hifiberry-digi-pro.dtbo \ + hy28a.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -883,6 +883,27 @@ Params: 24db_digital_gain Allow ga + master for bit clock and frame clock. + + ++Name: hifiberry-dacplusadcpro ++Info: Configures the HifiBerry DAC+ADC PRO audio card ++Load: dtoverlay=hifiberry-dacplusadcpro,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=hifiberry-dacplusadcpro,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ slave Force DAC+ADC Pro into slave mode, using Pi as ++ master for bit clock and frame clock. ++ ++ + Name: hifiberry-digi + Info: Configures the HifiBerry Digi and Digi+ audio card + Load: dtoverlay=hifiberry-digi +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts +@@ -0,0 +1,64 @@ ++// Definitions for HiFiBerry DAC+ADC PRO ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/clocks"; ++ __overlay__ { ++ dacpro_osc: dacpro_osc { ++ compatible = "hifiberry,dacpro-clk"; ++ #clock-cells = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ hb_dac: pcm5122@4d { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4d>; ++ clocks = <&dacpro_osc>; ++ status = "okay"; ++ }; ++ hb_adc: pcm186x@4a { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm1863"; ++ reg = <0x4a>; ++ clocks = <&dacpro_osc>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&sound>; ++ hifiberry_dacplusadcpro: __overlay__ { ++ compatible = "hifiberry,hifiberry-dacplusadcpro"; ++ audio-codec = <&hb_dac &hb_adc>; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = ++ <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,24db_digital_gain?"; ++ slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?"; ++ }; ++}; +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -48,6 +48,14 @@ config SND_BCM2708_SOC_HIFIBERRY_DACPLUS + help + Say Y or M if you want to add support for HifiBerry DAC+ADC. + ++config SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO ++ tristate "Support for HifiBerry DAC+ADC PRO" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x_I2C ++ select SND_SOC_PCM186X_I2C ++ help ++ Say Y or M if you want to add support for HifiBerry DAC+ADC PRO. ++ + config SND_BCM2708_SOC_HIFIBERRY_DIGI + tristate "Support for HifiBerry Digi" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -14,6 +14,7 @@ snd-soc-googlevoicehat-codec-objs := goo + # BCM2708 Machine Support + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o ++snd-soc-hifiberry-dacplusadcpro-objs := hifiberry_dacplusadcpro.o + snd-soc-justboom-dac-objs := justboom-dac.o + snd-soc-rpi-cirrus-objs := rpi-cirrus.o + snd-soc-rpi-proto-objs := rpi-proto.o +@@ -38,6 +39,7 @@ snd-soc-rpi-wm8804-soundcard-objs := rpi + obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO) += snd-soc-hifiberry-dacplusadcpro.o + obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_dacplusadcpro.c +@@ -0,0 +1,538 @@ ++/* ++ * ASoC Driver for HiFiBerry DAC+ / DAC Pro with ADC PRO Version (SW control) ++ * ++ * Author: Daniel Matuschek, Stuart MacLean ++ * Copyright 2014-2015 ++ * based on code by Florian Meier ++ * ADC added by Joerg Schambacher ++ * Copyright 2018-19 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/pcm512x.h" ++#include "../codecs/pcm186x.h" ++ ++#define HIFIBERRY_DACPRO_NOCLOCK 0 ++#define HIFIBERRY_DACPRO_CLK44EN 1 ++#define HIFIBERRY_DACPRO_CLK48EN 2 ++ ++struct pcm512x_priv { ++ struct regmap *regmap; ++ struct clk *sclk; ++}; ++ ++/* Clock rate of CLK44EN attached to GPIO6 pin */ ++#define CLK_44EN_RATE 22579200UL ++/* Clock rate of CLK48EN attached to GPIO3 pin */ ++#define CLK_48EN_RATE 24576000UL ++ ++static bool slave; ++static bool snd_rpi_hifiberry_is_dacpro; ++static bool digital_gain_0db_limit = true; ++ ++static const unsigned int pcm186x_adc_input_channel_sel_value[] = { ++ 0x00, 0x01, 0x02, 0x03, 0x10 ++}; ++ ++static const char * const pcm186x_adcl_input_channel_sel_text[] = { ++ "No Select", ++ "VINL1[SE]", /* Default for ADCL */ ++ "VINL2[SE]", ++ "VINL2[SE] + VINL1[SE]", ++ "{VIN1P, VIN1M}[DIFF]" ++}; ++ ++static const char * const pcm186x_adcr_input_channel_sel_text[] = { ++ "No Select", ++ "VINR1[SE]", /* Default for ADCR */ ++ "VINR2[SE]", ++ "VINR2[SE] + VINR1[SE]", ++ "{VIN2P, VIN2M}[DIFF]" ++}; ++ ++static const struct soc_enum pcm186x_adc_input_channel_sel[] = { ++ SOC_VALUE_ENUM_SINGLE(PCM186X_ADC1_INPUT_SEL_L, 0, ++ PCM186X_ADC_INPUT_SEL_MASK, ++ ARRAY_SIZE(pcm186x_adcl_input_channel_sel_text), ++ pcm186x_adcl_input_channel_sel_text, ++ pcm186x_adc_input_channel_sel_value), ++ SOC_VALUE_ENUM_SINGLE(PCM186X_ADC1_INPUT_SEL_R, 0, ++ PCM186X_ADC_INPUT_SEL_MASK, ++ ARRAY_SIZE(pcm186x_adcr_input_channel_sel_text), ++ pcm186x_adcr_input_channel_sel_text, ++ pcm186x_adc_input_channel_sel_value), ++}; ++ ++static const unsigned int pcm186x_mic_bias_sel_value[] = { ++ 0x00, 0x01, 0x11 ++}; ++ ++static const char * const pcm186x_mic_bias_sel_text[] = { ++ "Mic Bias off", ++ "Mic Bias on", ++ "Mic Bias with Bypass Resistor" ++}; ++ ++static const struct soc_enum pcm186x_mic_bias_sel[] = { ++ SOC_VALUE_ENUM_SINGLE(PCM186X_MIC_BIAS_CTRL, 0, ++ GENMASK(4, 0), ++ ARRAY_SIZE(pcm186x_mic_bias_sel_text), ++ pcm186x_mic_bias_sel_text, ++ pcm186x_mic_bias_sel_value), ++}; ++ ++static const unsigned int pcm186x_gain_sel_value[] = { ++ 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef, ++ 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, ++ 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff, ++ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, ++ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, ++ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, ++ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, ++ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, ++ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, ++ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, ++ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, ++ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, ++ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, ++ 0x50 ++}; ++ ++static const char * const pcm186x_gain_sel_text[] = { ++ "-12.0dB", "-11.5dB", "-11.0dB", "-10.5dB", "-10.0dB", "-9.5dB", ++ "-9.0dB", "-8.5dB", "-8.0dB", "-7.5dB", "-7.0dB", "-6.5dB", ++ "-6.0dB", "-5.5dB", "-5.0dB", "-4.5dB", "-4.0dB", "-3.5dB", ++ "-3.0dB", "-2.5dB", "-2.0dB", "-1.5dB", "-1.0dB", "-0.5dB", ++ "0.0dB", "0.5dB", "1.0dB", "1.5dB", "2.0dB", "2.5dB", ++ "3.0dB", "3.5dB", "4.0dB", "4.5dB", "5.0dB", "5.5dB", ++ "6.0dB", "6.5dB", "7.0dB", "7.5dB", "8.0dB", "8.5dB", ++ "9.0dB", "9.5dB", "10.0dB", "10.5dB", "11.0dB", "11.5dB", ++ "12.0dB", "12.5dB", "13.0dB", "13.5dB", "14.0dB", "14.5dB", ++ "15.0dB", "15.5dB", "16.0dB", "16.5dB", "17.0dB", "17.5dB", ++ "18.0dB", "18.5dB", "19.0dB", "19.5dB", "20.0dB", "20.5dB", ++ "21.0dB", "21.5dB", "22.0dB", "22.5dB", "23.0dB", "23.5dB", ++ "24.0dB", "24.5dB", "25.0dB", "25.5dB", "26.0dB", "26.5dB", ++ "27.0dB", "27.5dB", "28.0dB", "28.5dB", "29.0dB", "29.5dB", ++ "30.0dB", "30.5dB", "31.0dB", "31.5dB", "32.0dB", "32.5dB", ++ "33.0dB", "33.5dB", "34.0dB", "34.5dB", "35.0dB", "35.5dB", ++ "36.0dB", "36.5dB", "37.0dB", "37.5dB", "38.0dB", "38.5dB", ++ "39.0dB", "39.5dB", "40.0dB"}; ++ ++static const struct soc_enum pcm186x_gain_sel[] = { ++ SOC_VALUE_ENUM_SINGLE(PCM186X_PGA_VAL_CH1_L, 0, ++ 0xff, ++ ARRAY_SIZE(pcm186x_gain_sel_text), ++ pcm186x_gain_sel_text, ++ pcm186x_gain_sel_value), ++ SOC_VALUE_ENUM_SINGLE(PCM186X_PGA_VAL_CH1_R, 0, ++ 0xff, ++ ARRAY_SIZE(pcm186x_gain_sel_text), ++ pcm186x_gain_sel_text, ++ pcm186x_gain_sel_value), ++}; ++ ++static const struct snd_kcontrol_new pcm1863_snd_controls_card[] = { ++ SOC_ENUM("ADC Left Input", pcm186x_adc_input_channel_sel[0]), ++ SOC_ENUM("ADC Right Input", pcm186x_adc_input_channel_sel[1]), ++ SOC_ENUM("ADC Mic Bias", pcm186x_mic_bias_sel), ++ SOC_ENUM("PGA Gain Left", pcm186x_gain_sel[0]), ++ SOC_ENUM("PGA Gain Right", pcm186x_gain_sel[1]), ++}; ++ ++static int pcm1863_add_controls(struct snd_soc_component *component) ++{ ++ snd_soc_add_component_controls(component, ++ pcm1863_snd_controls_card, ++ ARRAY_SIZE(pcm1863_snd_controls_card)); ++ return 0; ++} ++ ++static void snd_rpi_hifiberry_dacplusadcpro_select_clk( ++ struct snd_soc_component *component, int clk_id) ++{ ++ switch (clk_id) { ++ case HIFIBERRY_DACPRO_NOCLOCK: ++ snd_soc_component_update_bits(component, ++ PCM512x_GPIO_CONTROL_1, 0x24, 0x00); ++ break; ++ case HIFIBERRY_DACPRO_CLK44EN: ++ snd_soc_component_update_bits(component, ++ PCM512x_GPIO_CONTROL_1, 0x24, 0x20); ++ break; ++ case HIFIBERRY_DACPRO_CLK48EN: ++ snd_soc_component_update_bits(component, ++ PCM512x_GPIO_CONTROL_1, 0x24, 0x04); ++ break; ++ } ++} ++ ++static void snd_rpi_hifiberry_dacplusadcpro_clk_gpio(struct snd_soc_component *component) ++{ ++ snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x24, 0x24); ++ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_3, 0x0f, 0x02); ++ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_6, 0x0f, 0x02); ++} ++ ++static bool snd_rpi_hifiberry_dacplusadcpro_is_sclk(struct snd_soc_component *component) ++{ ++ unsigned int sck; ++ ++ snd_soc_component_read(component, PCM512x_RATE_DET_4, &sck); ++ return (!(sck & 0x40)); ++} ++ ++static bool snd_rpi_hifiberry_dacplusadcpro_is_sclk_sleep( ++ struct snd_soc_component *component) ++{ ++ msleep(2); ++ return snd_rpi_hifiberry_dacplusadcpro_is_sclk(component); ++} ++ ++static bool snd_rpi_hifiberry_dacplusadcpro_is_pro_card(struct snd_soc_component *component) ++{ ++ bool isClk44EN, isClk48En, isNoClk; ++ ++ snd_rpi_hifiberry_dacplusadcpro_clk_gpio(component); ++ ++ snd_rpi_hifiberry_dacplusadcpro_select_clk(component, HIFIBERRY_DACPRO_CLK44EN); ++ isClk44EN = snd_rpi_hifiberry_dacplusadcpro_is_sclk_sleep(component); ++ ++ snd_rpi_hifiberry_dacplusadcpro_select_clk(component, HIFIBERRY_DACPRO_NOCLOCK); ++ isNoClk = snd_rpi_hifiberry_dacplusadcpro_is_sclk_sleep(component); ++ ++ snd_rpi_hifiberry_dacplusadcpro_select_clk(component, HIFIBERRY_DACPRO_CLK48EN); ++ isClk48En = snd_rpi_hifiberry_dacplusadcpro_is_sclk_sleep(component); ++ ++ return (isClk44EN && isClk48En && !isNoClk); ++} ++ ++static int snd_rpi_hifiberry_dacplusadcpro_clk_for_rate(int sample_rate) ++{ ++ int type; ++ ++ switch (sample_rate) { ++ case 11025: ++ case 22050: ++ case 44100: ++ case 88200: ++ case 176400: ++ case 352800: ++ type = HIFIBERRY_DACPRO_CLK44EN; ++ break; ++ default: ++ type = HIFIBERRY_DACPRO_CLK48EN; ++ break; ++ } ++ return type; ++} ++ ++static void snd_rpi_hifiberry_dacplusadcpro_set_sclk(struct snd_soc_component *component, ++ int sample_rate) ++{ ++ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); ++ ++ if (!IS_ERR(pcm512x->sclk)) { ++ int ctype; ++ ++ ctype = snd_rpi_hifiberry_dacplusadcpro_clk_for_rate(sample_rate); ++ clk_set_rate(pcm512x->sclk, (ctype == HIFIBERRY_DACPRO_CLK44EN) ++ ? CLK_44EN_RATE : CLK_48EN_RATE); ++ snd_rpi_hifiberry_dacplusadcpro_select_clk(component, ctype); ++ } ++} ++ ++static int snd_rpi_hifiberry_dacplusadcpro_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_component *dac = rtd->codec_dais[0]->component; ++ struct snd_soc_component *adc = rtd->codec_dais[1]->component; ++ struct snd_soc_dai_driver *adc_driver = rtd->codec_dais[1]->driver; ++ struct pcm512x_priv *priv; ++ int ret; ++ ++ if (slave) ++ snd_rpi_hifiberry_is_dacpro = false; ++ else ++ snd_rpi_hifiberry_is_dacpro = ++ snd_rpi_hifiberry_dacplusadcpro_is_pro_card(dac); ++ ++ if (snd_rpi_hifiberry_is_dacpro) { ++ struct snd_soc_dai_link *dai = rtd->dai_link; ++ ++ dai->name = "HiFiBerry DAC+ADC Pro"; ++ dai->stream_name = "HiFiBerry DAC+ADC Pro HiFi"; ++ ++ // set DAC DAI configuration ++ ret = snd_soc_dai_set_fmt(rtd->codec_dais[0], ++ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM); ++ if (ret < 0) ++ return ret; ++ ++ // set ADC DAI configuration ++ ret = snd_soc_dai_set_fmt(rtd->codec_dais[1], ++ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBS_CFS); ++ if (ret < 0) ++ return ret; ++ ++ // set CPU DAI configuration ++ ret = snd_soc_dai_set_fmt(rtd->cpu_dai, ++ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); ++ if (ret < 0) ++ return ret; ++ ++ snd_soc_component_update_bits(dac, PCM512x_BCLK_LRCLK_CFG, 0x31, 0x11); ++ snd_soc_component_update_bits(dac, PCM512x_MASTER_MODE, 0x03, 0x03); ++ snd_soc_component_update_bits(dac, PCM512x_MASTER_CLKDIV_2, 0x7f, 63); ++ } else { ++ priv = snd_soc_component_get_drvdata(dac); ++ priv->sclk = ERR_PTR(-ENOENT); ++ } ++ ++ /* disable 24bit mode as long as I2S module does not have sign extension fixed */ ++ adc_driver->capture.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE; ++ ++ snd_soc_component_update_bits(dac, PCM512x_GPIO_EN, 0x08, 0x08); ++ snd_soc_component_update_bits(dac, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); ++ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ ++ ret = pcm1863_add_controls(adc); ++ if (ret < 0) ++ dev_warn(rtd->dev, "Failed to add pcm1863 controls: %d\n", ++ ret); ++ ++ /* set GPIO2 to output, GPIO3 input */ ++ snd_soc_component_write(adc, PCM186X_GPIO3_2_CTRL, 0x00); ++ snd_soc_component_write(adc, PCM186X_GPIO3_2_DIR_CTRL, 0x04); ++ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x40); ++ ++ if (digital_gain_0db_limit) { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dacplusadcpro_update_rate_den( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_component *component = rtd->codec_dais[0]->component; /* only use DAC */ ++ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); ++ struct snd_ratnum *rats_no_pll; ++ unsigned int num = 0, den = 0; ++ int err; ++ ++ rats_no_pll = devm_kzalloc(rtd->dev, sizeof(*rats_no_pll), GFP_KERNEL); ++ if (!rats_no_pll) ++ return -ENOMEM; ++ ++ rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64; ++ rats_no_pll->den_min = 1; ++ rats_no_pll->den_max = 128; ++ rats_no_pll->den_step = 1; ++ ++ err = snd_interval_ratnum(hw_param_interval(params, ++ SNDRV_PCM_HW_PARAM_RATE), 1, rats_no_pll, &num, &den); ++ if (err >= 0 && den) { ++ params->rate_num = num; ++ params->rate_den = den; ++ } ++ ++ devm_kfree(rtd->dev, rats_no_pll); ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dacplusadcpro_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ int ret = 0; ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ int channels = params_channels(params); ++ int width = 32; ++ struct snd_soc_component *dac = rtd->codec_dais[0]->component; ++ ++ if (snd_rpi_hifiberry_is_dacpro) { ++ ++ width = snd_pcm_format_physical_width(params_format(params)); ++ ++ snd_rpi_hifiberry_dacplusadcpro_set_sclk(dac, ++ params_rate(params)); ++ ++ ret = snd_rpi_hifiberry_dacplusadcpro_update_rate_den( ++ substream, params); ++ if (ret) ++ return ret; ++ } ++ ++ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x03, 0x03, ++ channels, width); ++ if (ret) ++ return ret; ++ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dais[0], 0x03, 0x03, ++ channels, width); ++ if (ret) ++ return ret; ++ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dais[1], 0x03, 0x03, ++ channels, width); ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_dacplusadcpro_startup( ++ struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_component *dac = rtd->codec_dais[0]->component; ++ struct snd_soc_component *adc = rtd->codec_dais[1]->component; ++ ++ /* switch on respective LED */ ++ if (!substream->stream) ++ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ else ++ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x40); ++ return 0; ++} ++ ++static void snd_rpi_hifiberry_dacplusadcpro_shutdown( ++ struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_component *dac = rtd->codec_dais[0]->component; ++ struct snd_soc_component *adc = rtd->codec_dais[1]->component; ++ ++ /* switch off respective LED */ ++ if (!substream->stream) ++ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); ++ else ++ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x00); ++} ++ ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_hifiberry_dacplusadcpro_ops = { ++ .hw_params = snd_rpi_hifiberry_dacplusadcpro_hw_params, ++ .startup = snd_rpi_hifiberry_dacplusadcpro_startup, ++ .shutdown = snd_rpi_hifiberry_dacplusadcpro_shutdown, ++}; ++ ++static struct snd_soc_dai_link_component snd_rpi_hifiberry_dacplusadcpro_codecs[] = { ++ { ++ .name = "pcm512x.1-004d", ++ .dai_name = "pcm512x-hifi", ++ }, ++ { ++ .name = "pcm186x.1-004a", ++ .dai_name = "pcm1863-aif", ++ }, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_dacplusadcpro_dai[] = { ++{ ++ .name = "HiFiBerry DAC+ADC PRO", ++ .stream_name = "HiFiBerry DAC+ADC PRO HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .platform_name = "bcm2708-i2s.0", ++ .codecs = snd_rpi_hifiberry_dacplusadcpro_codecs, ++ .num_codecs = 2, ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_hifiberry_dacplusadcpro_ops, ++ .init = snd_rpi_hifiberry_dacplusadcpro_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_hifiberry_dacplusadcpro = { ++ .name = "snd_rpi_hifiberry_dacplusadcpro", ++ .driver_name = "HifiberryDacpAdcPro", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_dacplusadcpro_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dacplusadcpro_dai), ++}; ++ ++static int snd_rpi_hifiberry_dacplusadcpro_probe(struct platform_device *pdev) ++{ ++ int ret = 0, i = 0; ++ struct snd_soc_card *card = &snd_rpi_hifiberry_dacplusadcpro; ++ ++ snd_rpi_hifiberry_dacplusadcpro.dev = &pdev->dev; ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai; ++ ++ dai = &snd_rpi_hifiberry_dacplusadcpro_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ if (i2s_node) { ++ for (i = 0; i < card->num_links; i++) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ } ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "hifiberry-dacplusadcpro,24db_digital_gain"); ++ slave = of_property_read_bool(pdev->dev.of_node, ++ "hifiberry-dacplusadcpro,slave"); ++ ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplusadcpro); ++ if (ret && ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static const struct of_device_id snd_rpi_hifiberry_dacplusadcpro_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-dacplusadcpro", }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplusadcpro_of_match); ++ ++static struct platform_driver snd_rpi_hifiberry_dacplusadcpro_driver = { ++ .driver = { ++ .name = "snd-rpi-hifiberry-dacplusadcpro", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_dacplusadcpro_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_dacplusadcpro_probe, ++}; ++ ++module_platform_driver(snd_rpi_hifiberry_dacplusadcpro_driver); ++ ++MODULE_AUTHOR("Joerg Schambacher "); ++MODULE_AUTHOR("Daniel Matuschek "); ++MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+ADC"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.19/950-0658-arm-dts-Fix-Pi4-PWR-LED-configuration.patch b/target/linux/brcm2708/patches-4.19/950-0658-arm-dts-Fix-Pi4-PWR-LED-configuration.patch deleted file mode 100644 index 8abb4db634..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0658-arm-dts-Fix-Pi4-PWR-LED-configuration.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 4d4d714061ee6f54dc5feeaeda4389e2346386aa Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 17 Jun 2019 10:06:55 +0100 -Subject: [PATCH 658/806] arm: dts: Fix Pi4 PWR LED configuration - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -126,13 +126,13 @@ - act_led: act { - label = "led0"; - linux,default-trigger = "mmc0"; -- gpios = <&gpio 42 0>; -+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; - }; - - pwr_led: pwr { - label = "led1"; -- linux,default-trigger = "input"; -- gpios = <&expgpio 2 0>; -+ linux,default-trigger = "default-on"; -+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; - }; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0659-bcm2838.dtsi-Correct-gic400-memory-address-ranges.patch b/target/linux/brcm2708/patches-4.19/950-0659-bcm2838.dtsi-Correct-gic400-memory-address-ranges.patch deleted file mode 100644 index cb76771149..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0659-bcm2838.dtsi-Correct-gic400-memory-address-ranges.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 43420c9bb90d4290e02bbcaa40c19e00fb347615 Mon Sep 17 00:00:00 2001 -From: dp111 -Date: Sat, 15 Jun 2019 18:19:50 +0100 -Subject: [PATCH 659/806] bcm2838.dtsi : Correct gic400 memory address ranges - -It appears to me the addresses for the gic400 are slightly wrong . See section 3.2 https://static.docs.arm.com/ddi0471/a/DDI0471A_gic400_r0p0_trm.pdf ---- - arch/arm/boot/dts/bcm2838.dtsi | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm2838.dtsi -+++ b/arch/arm/boot/dts/bcm2838.dtsi -@@ -30,8 +30,8 @@ - compatible = "arm,gic-400"; - reg = <0x40041000 0x1000>, - <0x40042000 0x2000>, -- <0x40046000 0x2000>, -- <0x40048000 0x2000>; -+ <0x40044000 0x2000>, -+ <0x40046000 0x2000>; - }; - - thermal: thermal@7d5d2200 { diff --git a/target/linux/brcm2708/patches-4.19/950-0659-codecs-Correct-Katana-minimum-volume.patch b/target/linux/brcm2708/patches-4.19/950-0659-codecs-Correct-Katana-minimum-volume.patch new file mode 100644 index 0000000000..fca281014e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0659-codecs-Correct-Katana-minimum-volume.patch @@ -0,0 +1,23 @@ +From 43866e3396623775215943f3062a98c642fcae95 Mon Sep 17 00:00:00 2001 +From: allo-com +Date: Mon, 29 Jul 2019 15:06:57 +0530 +Subject: [PATCH] codecs: Correct Katana minimum volume + +Update Katana minimum volume to get the exact 0.5 dB value in each step. + +Signed-off-by: Sudeep Kumar +--- + sound/soc/bcm/allo-katana-codec.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/sound/soc/bcm/allo-katana-codec.c ++++ b/sound/soc/bcm/allo-katana-codec.c +@@ -126,7 +126,7 @@ static SOC_VALUE_ENUM_SINGLE_DECL(katana + katana_codec_deemphasis_texts, + katana_codec_deemphasis_values); + +-static const SNDRV_CTL_TLVD_DECLARE_DB_MINMAX(master_tlv, -12700, 0); ++static const SNDRV_CTL_TLVD_DECLARE_DB_MINMAX(master_tlv, -12750, 0); + + static const struct snd_kcontrol_new katana_codec_controls[] = { + SOC_DOUBLE_R_TLV("Master Playback Volume", KATANA_CODEC_VOLUME_1, diff --git a/target/linux/brcm2708/patches-4.19/950-0660-drm-vc4-A-present-but-empty-dmas-disables-audio.patch b/target/linux/brcm2708/patches-4.19/950-0660-drm-vc4-A-present-but-empty-dmas-disables-audio.patch new file mode 100644 index 0000000000..2d38456ae6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0660-drm-vc4-A-present-but-empty-dmas-disables-audio.patch @@ -0,0 +1,33 @@ +From 8befbf55f2668a4dae739588ed3c0b0d06fccacd Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 31 Jul 2019 17:36:34 +0100 +Subject: [PATCH] drm/vc4: A present but empty dmas disables audio + +Overlays are unable to remove properties in the base DTB, but they +can overwrite them. Allow a present but empty 'dmas' property +to also disable the HDMI audio interface. + +See: https://github.com/raspberrypi/linux/issues/2489 + +Signed-off-by: Phil Elwell +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -1087,10 +1087,12 @@ static int vc4_hdmi_audio_init(struct vc + struct device *dev = &hdmi->pdev->dev; + const __be32 *addr; + int ret; ++ int len; + +- if (!of_find_property(dev->of_node, "dmas", NULL)) { ++ if (!of_find_property(dev->of_node, "dmas", &len) || ++ len == 0) { + dev_warn(dev, +- "'dmas' DT property is missing, no HDMI audio\n"); ++ "'dmas' DT property is missing or empty, no HDMI audio\n"); + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0660-staging-vchiq-Use-the-old-dma-controller-for-OF-conf.patch b/target/linux/brcm2708/patches-4.19/950-0660-staging-vchiq-Use-the-old-dma-controller-for-OF-conf.patch deleted file mode 100644 index 59e9ebdb40..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0660-staging-vchiq-Use-the-old-dma-controller-for-OF-conf.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 65a5b304668ed6cb4568ac1a0ffbeabb28208b38 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 18 Jun 2019 12:15:50 +0100 -Subject: [PATCH 660/806] staging: vchiq: Use the old dma controller for OF - config on platform devices - -vchiq on Pi4 is no longer under the soc node, therefore it -doesn't get the dma-ranges for the VPU. - -Switch to using the configuration of the old dma controller as -that will set the dma-ranges correctly. - -Signed-off-by: Dave Stevenson ---- - .../interface/vchiq_arm/vchiq_arm.c | 17 ++++++++++++++--- - 1 file changed, 14 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -3599,6 +3599,7 @@ vchiq_register_child(struct platform_dev - { - struct platform_device_info pdevinfo; - struct platform_device *new_dev; -+ struct device_node *np; - - memset(&pdevinfo, 0, sizeof(pdevinfo)); - -@@ -3612,10 +3613,20 @@ vchiq_register_child(struct platform_dev - return NULL; - - /* -- * We want the dma-ranges etc to be copied from the parent VCHIQ device -- * to be passed on to the children too. -+ * We want the dma-ranges etc to be copied from a device with the -+ * correct dma-ranges for the VPU. -+ * VCHIQ on Pi4 is now under scb which doesn't get those dma-ranges. -+ * Take the "dma" node as going to be suitable as it sees the world -+ * through the same eyes as the VPU. - */ -- of_dma_configure(&new_dev->dev, pdev->dev.of_node, true); -+ np = of_find_node_by_path("dma"); -+ if (!np) -+ np = pdev->dev.of_node; -+ -+ of_dma_configure(&new_dev->dev, np, true); -+ -+ if (np != pdev->dev.of_node) -+ of_node_put(np); - - return new_dev; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0661-drm-vc4-Limit-fkms-to-modes-85Hz.patch b/target/linux/brcm2708/patches-4.19/950-0661-drm-vc4-Limit-fkms-to-modes-85Hz.patch deleted file mode 100644 index a2bed490d1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0661-drm-vc4-Limit-fkms-to-modes-85Hz.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 06a0e398e7dcd6ba0a61713596c32ec6d43b47c8 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 18 Jun 2019 21:37:45 +0100 -Subject: [PATCH 661/806] drm/vc4: Limit fkms to modes <= 85Hz - -Selecting 1080p100 and 120 has very limited gain, but don't want -to block VGA85 and similar. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -822,6 +822,10 @@ vc4_crtc_mode_valid(struct drm_crtc *crt - return MODE_NO_DBLESCAN; - } - -+ /* Disable refresh rates > 85Hz as limited gain from them */ -+ if (drm_mode_vrefresh(mode) > 85) -+ return MODE_BAD_VVALUE; -+ - /* Limit the pixel clock based on the HDMI clock limits from the - * firmware - */ diff --git a/target/linux/brcm2708/patches-4.19/950-0661-overlays-Add-audio-parameter-to-vc4-kms-v3d.patch b/target/linux/brcm2708/patches-4.19/950-0661-overlays-Add-audio-parameter-to-vc4-kms-v3d.patch new file mode 100644 index 0000000000..a70d50eecd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0661-overlays-Add-audio-parameter-to-vc4-kms-v3d.patch @@ -0,0 +1,49 @@ +From 418ca5973ad807f9d7f99e68af2bd21c7e8baa4d Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 31 Jul 2019 17:39:37 +0100 +Subject: [PATCH] overlays: Add audio parameter to vc4-kms-v3d + +The audio parameter to the vc4-kms-v3d overlay allows audio support +to be disabled (it defaults to on) by adding "audio=off" to the +dtoverlay parameters. + +See: https://github.com/raspberrypi/linux/issues/2489 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 1 + + arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 8 ++++++++ + 2 files changed, 9 insertions(+) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -2480,6 +2480,7 @@ Params: cma-256 CMA is 2 + cma-128 CMA is 128MB + cma-96 CMA is 96MB + cma-64 CMA is 64MB ++ audio Enable or disable audio over HDMI (default "on") + + + Name: vga666 +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -134,11 +134,19 @@ + }; + }; + ++ fragment@17 { ++ target = <&hdmi>; ++ __dormant__ { ++ dmas; ++ }; ++ }; ++ + __overrides__ { + cma-256 = <0>,"+0-1-2-3-4"; + cma-192 = <0>,"-0+1-2-3-4"; + cma-128 = <0>,"-0-1+2-3-4"; + cma-96 = <0>,"-0-1-2+3-4"; + cma-64 = <0>,"-0-1-2-3+4"; ++ audio = <0>,"!17"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0662-arm-bcm2835-Add-bcm2838-compatible-string.patch b/target/linux/brcm2708/patches-4.19/950-0662-arm-bcm2835-Add-bcm2838-compatible-string.patch deleted file mode 100644 index 14d289660a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0662-arm-bcm2835-Add-bcm2838-compatible-string.patch +++ /dev/null @@ -1,20 +0,0 @@ -From aca60a3944ff6a4da66e96d9ae54f4bca271b600 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 11 Jun 2019 17:38:28 +0100 -Subject: [PATCH 662/806] arm: bcm2835: Add bcm2838 compatible string. - -Signed-off-by: Phil Elwell ---- - arch/arm/mach-bcm/board_bcm2835.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/mach-bcm/board_bcm2835.c -+++ b/arch/arm/mach-bcm/board_bcm2835.c -@@ -118,6 +118,7 @@ static const char * const bcm2835_compat - #ifdef CONFIG_ARCH_MULTI_V7 - "brcm,bcm2836", - "brcm,bcm2837", -+ "brcm,bcm2838", - #endif - NULL - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0662-overlays-Update-the-upstream-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0662-overlays-Update-the-upstream-overlay.patch new file mode 100644 index 0000000000..6cec8140f0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0662-overlays-Update-the-upstream-overlay.patch @@ -0,0 +1,28 @@ +From a14162d8da62fb570df916d7386febe51d6ed2bc Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 31 Jul 2019 17:41:47 +0100 +Subject: [PATCH] overlays: Update the upstream overlay + +The recent vc4-kms-v3d commit has changed the content of the +upstream overlay (even though the extra fragment is disabled). + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/upstream-overlay.dts | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/arch/arm/boot/dts/overlays/upstream-overlay.dts ++++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts +@@ -110,6 +110,12 @@ + }; + }; + fragment@17 { ++ target = <&hdmi>; ++ __dormant__ { ++ dmas; ++ }; ++ }; ++ fragment@18 { + target = <&usb>; + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/brcm2708/patches-4.19/950-0663-Fixup-FKMS-interrupt-handing-for-non-existent-displa.patch b/target/linux/brcm2708/patches-4.19/950-0663-Fixup-FKMS-interrupt-handing-for-non-existent-displa.patch new file mode 100644 index 0000000000..2626658d16 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0663-Fixup-FKMS-interrupt-handing-for-non-existent-displa.patch @@ -0,0 +1,39 @@ +From c2957d7709a43c81e5345d537feaa6980ffcc1a4 Mon Sep 17 00:00:00 2001 +From: James Hughes +Date: Mon, 29 Jul 2019 12:02:59 +0100 +Subject: [PATCH] Fixup FKMS interrupt handing for non-existent display + +If an errant interrupt flag was received from a non-existent display, +a NULL pointer access was made. Protect against this by checking if a +second display is present prior to checking the interrupt flags. +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 17 ++++++++++------- + 1 file changed, 10 insertions(+), 7 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -1056,14 +1056,17 @@ static irqreturn_t vc4_crtc_irq_handler( + vc4_crtc_handle_page_flip(crtc_list[0]); + } + +- /* Check for the secondary display too */ +- chan = readl(crtc_list[0]->regs + SMIDSW1); ++ if (crtc_list[1]) { ++ /* Check for the secondary display too */ ++ chan = readl(crtc_list[0]->regs + SMIDSW1); + +- if (chan & 1) { +- writel(SMI_NEW, crtc_list[0]->regs + SMIDSW1); +- if (crtc_list[1]->vblank_enabled) +- drm_crtc_handle_vblank(&crtc_list[1]->base); +- vc4_crtc_handle_page_flip(crtc_list[1]); ++ if (chan & 1) { ++ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW1); ++ ++ if (crtc_list[1]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[1]->base); ++ vc4_crtc_handle_page_flip(crtc_list[1]); ++ } + } + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0663-arm-dts-Improve-the-bcm27xx-inclusion-hierarchy.patch b/target/linux/brcm2708/patches-4.19/950-0663-arm-dts-Improve-the-bcm27xx-inclusion-hierarchy.patch deleted file mode 100644 index cf364e05d9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0663-arm-dts-Improve-the-bcm27xx-inclusion-hierarchy.patch +++ /dev/null @@ -1,490 +0,0 @@ -From d27f2b90df0b787859c2f5665feaecbe87e6b1ff Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 4 Jun 2019 16:22:22 +0100 -Subject: [PATCH 663/806] arm: dts: Improve the bcm27xx inclusion hierarchy - -1) The top-level .dts files now include parallel chains of bcm27xx.dtsi - and bcm27xx-rpi.dtsi files, with no cross-inclusion between the two - chains. - -2) Move definitions and deletions to the point of maximum commonality - to reduce redundancy. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi-cm.dtsi | 1 + - arch/arm/boot/dts/bcm2708-rpi-zero-w.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi-zero.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi.dtsi | 63 +++++++--------------- - arch/arm/boot/dts/bcm2708.dtsi | 1 - - arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 1 + - arch/arm/boot/dts/bcm2709.dtsi | 1 - - arch/arm/boot/dts/bcm270x.dtsi | 18 +------ - arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 1 + - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 1 + - arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 1 + - arch/arm/boot/dts/bcm2710.dtsi | 1 - - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 15 ++++-- - arch/arm/boot/dts/bcm2711-rpi.dtsi | 7 +++ - arch/arm/boot/dts/bcm2711.dtsi | 10 ---- - arch/arm/boot/dts/bcm2835-rpi.dtsi | 16 ++++++ - arch/arm/boot/dts/bcm2838.dtsi | 33 ++++++++---- - arch/arm/boot/dts/bcm283x.dtsi | 2 +- - 20 files changed, 86 insertions(+), 90 deletions(-) - create mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi - ---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" - ---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" - #include "bcm283x-rpi-smsc9512.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" - ---- a/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi -@@ -1,4 +1,5 @@ - #include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" - - &leds { - act_led: act { ---- a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" - - / { ---- a/arch/arm/boot/dts/bcm2708-rpi-zero.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" - - / { ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -1,6 +1,6 @@ --/* Downstream version of bcm2835-rpi.dtsi */ -+/* Downstream modifications to bcm2835-rpi.dtsi */ - --#include -+#include "bcm2835-rpi.dtsi" - - / { - memory { -@@ -49,29 +49,10 @@ - reg = <0x7e200000 0x1000>; - }; - -- firmware: firmware { -- compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; -- #address-cells = <0>; -- #size-cells = <0>; -- mboxes = <&mailbox>; -- }; -- -- power: power { -- compatible = "raspberrypi,bcm2835-power"; -- firmware = <&firmware>; -- #power-domain-cells = <1>; -- }; -- - fb: fb { - compatible = "brcm,bcm2708-fb"; - firmware = <&firmware>; -- status = "disabled"; -- }; -- -- vchiq: mailbox@7e00b840 { -- compatible = "brcm,bcm2835-vchiq"; -- reg = <0x7e00b840 0x3c>; -- interrupts = <0 2>; -+ status = "okay"; - }; - - vcsm: vcsm { -@@ -91,10 +72,6 @@ - sound: sound { - status = "disabled"; - }; -- -- txp: txp@7e004000 { -- status = "disabled"; -- }; - }; - - __overrides__ { -@@ -125,11 +102,23 @@ - }; - - &hdmi { -- power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "disabled"; - }; - --&usb { -- power-domains = <&power RPI_POWER_DOMAIN_USB>; -+&txp { -+ status = "disabled"; -+}; -+ -+&i2c0 { -+ status = "disabled"; -+}; -+ -+&i2c1 { -+ status = "disabled"; -+}; -+ -+&i2c2 { -+ status = "disabled"; - }; - - &clocks { -@@ -141,16 +130,8 @@ sdhost_pins: &sdhost_gpio48 { - }; - - &sdhost { -- pinctrl-names = "default"; -- pinctrl-0 = <&sdhost_gpio48>; -- bus-width = <4>; - brcm,overclock-50 = <0>; - brcm,pio-limit = <1>; -- status = "okay"; --}; -- --&fb { -- status = "okay"; - }; - - &cpu_thermal { -@@ -160,11 +141,3 @@ sdhost_pins: &sdhost_gpio48 { - &vec { - status = "disabled"; - }; -- --&csi0 { -- power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; --}; -- --&csi1 { -- power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; --}; ---- a/arch/arm/boot/dts/bcm2708.dtsi -+++ b/arch/arm/boot/dts/bcm2708.dtsi -@@ -1,6 +1,5 @@ - #include "bcm2835.dtsi" - #include "bcm270x.dtsi" --#include "bcm2708-rpi.dtsi" - - / { - /delete-node/ cpus; ---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2709.dtsi" -+#include "bcm2709-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" - ---- a/arch/arm/boot/dts/bcm2709.dtsi -+++ b/arch/arm/boot/dts/bcm2709.dtsi -@@ -1,6 +1,5 @@ - #include "bcm2836.dtsi" - #include "bcm270x.dtsi" --#include "bcm2709-rpi.dtsi" - - / { - soc { ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -68,7 +68,7 @@ - - /delete-node/ sdhci@7e300000; - -- mmc: mmc@7e300000 { -+ sdhci: mmc: mmc@7e300000 { - compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; - reg = <0x7e300000 0x100>; - interrupts = <2 30>; -@@ -152,22 +152,6 @@ - }; - }; - -- vdd_5v0_reg: fixedregulator_5v0 { -- compatible = "regulator-fixed"; -- regulator-name = "5v0"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- regulator-always-on; -- }; -- -- vdd_3v3_reg: fixedregulator_3v3 { -- compatible = "regulator-fixed"; -- regulator-name = "3v3"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -- regulator-always-on; -- }; -- - __overrides__ { - cam0-pwdn-ctrl; - cam0-pwdn; ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2710.dtsi" -+#include "bcm2709-rpi.dtsi" - #include "bcm283x-rpi-lan7515.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" - ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2710.dtsi" -+#include "bcm2709-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" - ---- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2710.dtsi" -+#include "bcm2709-rpi.dtsi" - #include "bcm283x-rpi-csi0-2lane.dtsi" - #include "bcm283x-rpi-csi1-4lane.dtsi" - ---- a/arch/arm/boot/dts/bcm2710.dtsi -+++ b/arch/arm/boot/dts/bcm2710.dtsi -@@ -1,6 +1,5 @@ - #include "bcm2837.dtsi" - #include "bcm270x.dtsi" --#include "bcm2709-rpi.dtsi" - - / { - compatible = "brcm,bcm2837", "brcm,bcm2836"; ---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -1,13 +1,12 @@ - /dts-v1/; - - #include "bcm2711.dtsi" -+#include "bcm2711-rpi.dtsi" - #include "bcm283x-rpi-csi1-2lane.dtsi" - - / { -- compatible = "raspberrypi,4-model-b", "brcm,bcm2838", "brcm,bcm2837"; -+ compatible = "raspberrypi,4-model-b", "brcm,bcm2838"; - model = "Raspberry Pi 4 Model B"; -- #address-cells = <2>; -- #size-cells = <1>; - - memory { - device_type = "memory"; -@@ -48,10 +47,18 @@ - }; - - &firmware { -- expgpio: expgpio { -+ expgpio: gpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; -+ gpio-line-names = "BT_ON", -+ "WL_ON", -+ "PWR_LED_OFF", -+ "GLOBAL_RESET", -+ "VDD_SD_IO_SEL", -+ "CAM_GPIO", -+ "", -+ ""; - status = "okay"; - }; - }; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi -@@ -0,0 +1,7 @@ -+#include "bcm2708-rpi.dtsi" -+#include "bcm2838-rpi.dtsi" -+ -+&v3d { -+ /* Undo the overwriting by bcm270x.dtsi */ -+ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; -+}; ---- a/arch/arm/boot/dts/bcm2711.dtsi -+++ b/arch/arm/boot/dts/bcm2711.dtsi -@@ -1,10 +1,8 @@ - #include "bcm2838.dtsi" - #include "bcm270x.dtsi" --#include "bcm2708-rpi.dtsi" - - / { - soc { -- /delete-node/ mailbox@7e00b840; - /delete-node/ v3d@7ec00000; - }; - -@@ -17,14 +15,6 @@ - status = "disabled"; - }; - --&dma { -- brcm,dma-channel-mask = <0x7ef5>; --}; -- --&txp { -- interrupts = ; --}; -- - &firmwarekms { - interrupts = ; - }; ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -36,6 +36,22 @@ - interrupts = <0 2>; - }; - }; -+ -+ vdd_3v3_reg: fixedregulator_3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vdd_5v0_reg: fixedregulator_5v0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "5v0"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; - }; - - &gpio { ---- a/arch/arm/boot/dts/bcm2838.dtsi -+++ b/arch/arm/boot/dts/bcm2838.dtsi -@@ -5,7 +5,10 @@ - #include - - / { -- compatible = "brcm,bcm2838", "brcm,bcm2837"; -+ compatible = "brcm,bcm2838"; -+ -+ #address-cells = <2>; -+ #size-cells = <1>; - - interrupt-parent = <&gicv2>; - -@@ -16,8 +19,8 @@ - /* Emulate a contiguous 30-bit address range for DMA */ - dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; - -- /delete-node/ mailbox@7e00b840; - /delete-node/ interrupt-controller@7e00f300; -+ /delete-node/ v3d@7ec00000; - - local_intc: local_intc@40000000 { - compatible = "brcm,bcm2836-l1-intc"; -@@ -191,6 +194,16 @@ - interrupts = ; - }; - -+ pwm1: pwm@7e20c800 { -+ compatible = "brcm,bcm2835-pwm"; -+ reg = <0x7e20c800 0x28>; -+ clocks = <&clocks BCM2835_CLOCK_PWM>; -+ assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; -+ assigned-clock-rates = <10000000>; -+ #pwm-cells = <2>; -+ status = "disabled"; -+ }; -+ - emmc2: emmc2@7e340000 { - compatible = "brcm,bcm2711-emmc2"; - status = "okay"; -@@ -385,7 +398,7 @@ - "dma13", - "dma14"; - #dma-cells = <1>; -- brcm,dma-channel-mask = <0x7000>; -+ brcm,dma-channel-mask = <0x7800>; - }; - /* DMA4 - 40 bit DMA engines */ - -@@ -396,12 +409,6 @@ - interrupts = ; - }; - -- vchiq: mailbox@7e00b840 { -- compatible = "brcm,bcm2838-vchiq"; -- reg = <0 0x7e00b840 0x3c>; -- interrupts = ; -- }; -- - hevc-decoder@7eb00000 { - compatible = "raspberrypi,argon-hevc-decoder"; - reg = <0x0 0x7eb00000 0x10000>; -@@ -450,6 +457,8 @@ - }; - - &gpio { -+ compatible = "brcm,bcm2838-gpio", "brcm,bcm2835-gpio"; -+ - gpclk0_gpio49: gpclk0_gpio49 { - brcm,pins = <49>; - brcm,function = ; -@@ -729,5 +738,9 @@ - "dma8", - "dma9", - "dma10"; -- brcm,dma-channel-mask = <0x01f5>; -+ brcm,dma-channel-mask = <0x07f5>; -+}; -+ -+&txp { -+ interrupts = ; - }; ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -55,7 +55,7 @@ - #address-cells = <1>; - #size-cells = <1>; - -- txp@7e004000 { -+ txp: txp@7e004000 { - compatible = "brcm,bcm2835-txp"; - reg = <0x7e004000 0x20>; - interrupts = <1 11>; diff --git a/target/linux/brcm2708/patches-4.19/950-0664-arm-dts-First-draft-of-upstream-Pi4-DTS.patch b/target/linux/brcm2708/patches-4.19/950-0664-arm-dts-First-draft-of-upstream-Pi4-DTS.patch deleted file mode 100644 index af5e22da11..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0664-arm-dts-First-draft-of-upstream-Pi4-DTS.patch +++ /dev/null @@ -1,176 +0,0 @@ -From 5216bb8a1257a8216362affe4757a96a36b60b32 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 11 Jun 2019 18:08:05 +0100 -Subject: [PATCH 664/806] arm: dts: First draft of upstream Pi4 DTS - -I've attempted to follow the upstream conventions in the DT commits, -but this is just presented here initially as a talking point. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm2838-rpi-4-b.dts | 118 ++++++++++++++++++++++++++ - arch/arm/boot/dts/bcm2838-rpi.dtsi | 25 ++++++ - 3 files changed, 144 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm2838-rpi-4-b.dts - create mode 100644 arch/arm/boot/dts/bcm2838-rpi.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -94,6 +94,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2836-rpi-2-b.dtb \ - bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb \ -+ bcm2838-rpi-4-b.dtb \ - bcm2835-rpi-zero.dtb \ - bcm2835-rpi-zero-w.dtb - dtb-$(CONFIG_ARCH_BCM_5301X) += \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2838-rpi-4-b.dts -@@ -0,0 +1,118 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/dts-v1/; -+#include "bcm2838.dtsi" -+#include "bcm2835-rpi.dtsi" -+#include "bcm2838-rpi.dtsi" -+ -+/ { -+ compatible = "raspberrypi,4-model-b", "brcm,bcm2838"; -+ model = "Raspberry Pi 4 Model B"; -+ -+ chosen { -+ /* 8250 auxiliary UART instead of pl011 */ -+ stdout-path = "serial1:115200n8"; -+ }; -+ -+ memory { -+ reg = <0 0 0x40000000>; -+ }; -+ -+ leds { -+ act { -+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ pwr { -+ label = "PWR"; -+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ wifi_pwrseq: wifi-pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; -+ }; -+ -+ sd_io_1v8_reg: sd_io_1v8_reg { -+ status = "okay"; -+ compatible = "regulator-gpio"; -+ vin-supply = <&vdd_5v0_reg>; -+ regulator-name = "vdd-sd-io"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-settling-time-us = <5000>; -+ -+ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; -+ states = <1800000 0x1 -+ 3300000 0x0>; -+ }; -+}; -+ -+&firmware { -+ expgpio: gpio { -+ compatible = "raspberrypi,firmware-gpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ gpio-line-names = "BT_ON", -+ "WL_ON", -+ "PWR_LED_OFF", -+ "GLOBAL_RESET", -+ "VDD_SD_IO_SEL", -+ "CAM_GPIO", -+ "", -+ ""; -+ status = "okay"; -+ }; -+}; -+ -+&pwm1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; -+ status = "okay"; -+}; -+ -+/* SDHCI is used to control the SDIO for wireless */ -+&sdhci { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emmc_gpio34>; -+ status = "okay"; -+ bus-width = <4>; -+ non-removable; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ -+ brcmf: wifi@1 { -+ reg = <1>; -+ compatible = "brcm,bcm4329-fmac"; -+ }; -+}; -+ -+/* EMMC2 is used to drive the SD card */ -+&emmc2 { -+ status = "okay"; -+ broken-cd; -+ vqmmc-supply = <&sd_io_1v8_reg>; -+}; -+ -+/* uart0 communicates with the BT module */ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; -+ status = "okay"; -+ -+ bluetooth { -+ compatible = "brcm,bcm43438-bt"; -+ max-speed = <2000000>; -+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; -+ }; -+}; -+ -+/* uart1 is mapped to the pin header */ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_gpio14>; -+ status = "okay"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2838-rpi.dtsi -@@ -0,0 +1,25 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+/ { -+ soc { -+ /delete-node/ mailbox@7e00b840; -+ }; -+}; -+ -+&scb { -+ vchiq: mailbox@7e00b840 { -+ compatible = "brcm,bcm2838-vchiq"; -+ reg = <0 0x7e00b840 0x3c>; -+ interrupts = ; -+ }; -+}; -+ -+&dma { -+ /* The VPU firmware uses DMA channel 11 for VCHIQ */ -+ brcm,dma-channel-mask = <0x1f5>; -+}; -+ -+&dma40 { -+ /* The VPU firmware DMA channel 11 for VCHIQ */ -+ brcm,dma-channel-mask = <0x7000>; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0664-drivers-char-Use-correct-name-for-the-Raspberry-Pi-v.patch b/target/linux/brcm2708/patches-4.19/950-0664-drivers-char-Use-correct-name-for-the-Raspberry-Pi-v.patch new file mode 100644 index 0000000000..92ecf120ba --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0664-drivers-char-Use-correct-name-for-the-Raspberry-Pi-v.patch @@ -0,0 +1,689 @@ +From 6c8c9ca56ce6039ade09d26c069132538e4de9f0 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Sun, 28 Jul 2019 22:22:36 +0100 +Subject: [PATCH] drivers: char: Use correct name for the Raspberry Pi + video decoder + +Replace the old code name with a more appropriate name - RPiVid. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2838.dtsi | 10 +- + drivers/char/broadcom/Kconfig | 8 +- + drivers/char/broadcom/Makefile | 2 +- + .../broadcom/{argon-mem.c => rpivid-mem.c} | 105 +++++++++--------- + drivers/mfd/bcm2835-pm.c | 12 +- + drivers/soc/bcm/bcm2835-power.c | 6 +- + include/linux/mfd/bcm2835-pm.h | 2 +- + 8 files changed, 71 insertions(+), 76 deletions(-) + rename drivers/char/broadcom/{argon-mem.c => rpivid-mem.c} (69%) + +--- a/arch/arm/boot/dts/bcm2838.dtsi ++++ b/arch/arm/boot/dts/bcm2838.dtsi +@@ -409,26 +409,26 @@ + }; + + hevc-decoder@7eb00000 { +- compatible = "raspberrypi,argon-hevc-decoder"; ++ compatible = "raspberrypi,rpivid-hevc-decoder"; + reg = <0x0 0x7eb00000 0x10000>; + status = "okay"; + }; + +- argon-local-intc@7eb10000 { +- compatible = "raspberrypi,argon-local-intc"; ++ rpivid-local-intc@7eb10000 { ++ compatible = "raspberrypi,rpivid-local-intc"; + reg = <0x0 0x7eb10000 0x1000>; + status = "okay"; + interrupts = ; + }; + + h264-decoder@7eb20000 { +- compatible = "raspberrypi,argon-h264-decoder"; ++ compatible = "raspberrypi,rpivid-h264-decoder"; + reg = <0x0 0x7eb20000 0x10000>; + status = "okay"; + }; + + vp9-decoder@7eb30000 { +- compatible = "raspberrypi,argon-vp9-decoder"; ++ compatible = "raspberrypi,rpivid-vp9-decoder"; + reg = <0x0 0x7eb30000 0x10000>; + status = "okay"; + }; +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -50,10 +50,10 @@ config BCM2835_SMI_DEV + Broadcom's Secondary Memory interface. The low-level functionality is provided + by the SMI driver itself. + +-config ARGON_MEM +- tristate "Character device driver for the Argon decoder hardware" ++config RPIVID_MEM ++ tristate "Character device driver for the Raspberry Pi RPIVid video decoder hardware" + default n + help + This driver provides a character device interface for memory-map operations +- so userspace tools can access the control and status registers of the Argon +- video decoder hardware. ++ so userspace tools can access the control and status registers of the ++ Raspberry Pi RPiVid video decoder hardware. +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -4,4 +4,4 @@ obj-$(CONFIG_BCM_VC_SM) += vc_sm + + obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o + obj-$(CONFIG_BCM2835_SMI_DEV) += bcm2835_smi_dev.o +-obj-$(CONFIG_ARGON_MEM) += argon-mem.o ++obj-$(CONFIG_RPIVID_MEM) += rpivid-mem.o +--- a/drivers/char/broadcom/argon-mem.c ++++ /dev/null +@@ -1,277 +0,0 @@ +-/** +- * argon-mem.c - character device access to the Argon decoder registers +- * +- * Based on bcm2835-gpiomem.c. Provides IO memory access to the decoder +- * register blocks such that ffmpeg plugins can access the hardware. +- * +- * Jonathan Bell +- * Copyright (c) 2019, Raspberry Pi (Trading) Ltd. +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions +- * are met: +- * 1. Redistributions of source code must retain the above copyright +- * notice, this list of conditions, and the following disclaimer, +- * without modification. +- * 2. Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * 3. The names of the above-listed copyright holders may not be used +- * to endorse or promote products derived from this software without +- * specific prior written permission. +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") version 2, as published by the Free +- * Software Foundation. +- * +- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS +- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, +- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +- */ +- +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +- +-#define DRIVER_NAME "argon-mem" +-#define DEVICE_MINOR 0 +- +-struct argon_mem_priv { +- dev_t devid; +- struct class *class; +- struct cdev argon_mem_cdev; +- unsigned long regs_phys; +- unsigned long mem_window_len; +- struct device *dev; +- const char *name; +-}; +- +-static int argon_mem_open(struct inode *inode, struct file *file) +-{ +- int dev = iminor(inode); +- int ret = 0; +- struct argon_mem_priv *priv; +- if (dev != DEVICE_MINOR) +- ret = -ENXIO; +- +- priv = container_of(inode->i_cdev, struct argon_mem_priv, +- argon_mem_cdev); +- if (!priv) +- return -EINVAL; +- file->private_data = priv; +- return ret; +-} +- +-static int argon_mem_release(struct inode *inode, struct file *file) +-{ +- int dev = iminor(inode); +- int ret = 0; +- +- if (dev != DEVICE_MINOR) +- ret = -ENXIO; +- +- return ret; +-} +- +-static const struct vm_operations_struct argon_mem_vm_ops = { +-#ifdef CONFIG_HAVE_IOREMAP_PROT +- .access = generic_access_phys +-#endif +-}; +- +-static int argon_mem_mmap(struct file *file, struct vm_area_struct *vma) +-{ +- struct argon_mem_priv *priv; +- unsigned long pages; +- +- priv = file->private_data; +- pages = priv->regs_phys >> PAGE_SHIFT; +- /* +- * The address decode is far larger than the actual number of registers. +- * Just map the whole lot in. +- */ +- vma->vm_page_prot = phys_mem_access_prot(file, pages, +- priv->mem_window_len, +- vma->vm_page_prot); +- vma->vm_ops = &argon_mem_vm_ops; +- if (remap_pfn_range(vma, vma->vm_start, +- pages, +- priv->mem_window_len, +- vma->vm_page_prot)) { +- return -EAGAIN; +- } +- return 0; +-} +- +-static const struct file_operations +-argon_mem_fops = { +- .owner = THIS_MODULE, +- .open = argon_mem_open, +- .release = argon_mem_release, +- .mmap = argon_mem_mmap, +-}; +- +-static const struct of_device_id argon_mem_of_match[]; +-static int argon_mem_probe(struct platform_device *pdev) +-{ +- int err; +- void *ptr_err; +- const struct of_device_id *id; +- struct device *dev = &pdev->dev; +- struct device *argon_mem_dev; +- struct resource *ioresource; +- struct argon_mem_priv *priv; +- +- +- /* Allocate buffers and instance data */ +- +- priv = kzalloc(sizeof(struct argon_mem_priv), GFP_KERNEL); +- +- if (!priv) { +- err = -ENOMEM; +- goto failed_inst_alloc; +- } +- platform_set_drvdata(pdev, priv); +- +- priv->dev = dev; +- id = of_match_device(argon_mem_of_match, dev); +- if (!id) +- return -EINVAL; +- priv->name = id->data; +- +- ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- if (ioresource) { +- priv->regs_phys = ioresource->start; +- priv->mem_window_len = ioresource->end - ioresource->start; +- } else { +- dev_err(priv->dev, "failed to get IO resource"); +- err = -ENOENT; +- goto failed_get_resource; +- } +- +- /* Create character device entries */ +- +- err = alloc_chrdev_region(&priv->devid, +- DEVICE_MINOR, 1, priv->name); +- if (err != 0) { +- dev_err(priv->dev, "unable to allocate device number"); +- goto failed_alloc_chrdev; +- } +- cdev_init(&priv->argon_mem_cdev, &argon_mem_fops); +- priv->argon_mem_cdev.owner = THIS_MODULE; +- err = cdev_add(&priv->argon_mem_cdev, priv->devid, 1); +- if (err != 0) { +- dev_err(priv->dev, "unable to register device"); +- goto failed_cdev_add; +- } +- +- /* Create sysfs entries */ +- +- priv->class = class_create(THIS_MODULE, priv->name); +- ptr_err = priv->class; +- if (IS_ERR(ptr_err)) +- goto failed_class_create; +- +- argon_mem_dev = device_create(priv->class, NULL, +- priv->devid, NULL, +- priv->name); +- ptr_err = argon_mem_dev; +- if (IS_ERR(ptr_err)) +- goto failed_device_create; +- +- dev_info(priv->dev, "%s initialised: Registers at 0x%08lx length 0x%08lx", +- priv->name, priv->regs_phys, priv->mem_window_len); +- +- return 0; +- +-failed_device_create: +- class_destroy(priv->class); +-failed_class_create: +- cdev_del(&priv->argon_mem_cdev); +- err = PTR_ERR(ptr_err); +-failed_cdev_add: +- unregister_chrdev_region(priv->devid, 1); +-failed_alloc_chrdev: +-failed_get_resource: +- kfree(priv); +-failed_inst_alloc: +- dev_err(priv->dev, "could not load argon_mem"); +- return err; +-} +- +-static int argon_mem_remove(struct platform_device *pdev) +-{ +- struct device *dev = &pdev->dev; +- struct argon_mem_priv *priv = platform_get_drvdata(pdev); +- +- device_destroy(priv->class, priv->devid); +- class_destroy(priv->class); +- cdev_del(&priv->argon_mem_cdev); +- unregister_chrdev_region(priv->devid, 1); +- kfree(priv); +- +- dev_info(dev, "%s driver removed - OK", priv->name); +- return 0; +-} +- +-static const char argon_hevc_name[] = "argon-hevcmem"; +-static const char argon_h264_name[] = "argon-h264mem"; +-static const char argon_vp9_name[] = "argon-vp9mem"; +-static const char argon_intc_name[] = "argon-intcmem"; +- +-static const struct of_device_id argon_mem_of_match[] = { +- { +- .compatible = "raspberrypi,argon-hevc-decoder", +- .data = &argon_hevc_name, +- }, +- { +- .compatible = "raspberrypi,argon-h264-decoder", +- .data = &argon_h264_name, +- }, +- { +- .compatible = "raspberrypi,argon-vp9-decoder", +- .data = &argon_vp9_name, +- }, +- /* The "intc" is included as this block of hardware contains the +- * "frame done" status flags. +- */ +- { +- .compatible = "raspberrypi,argon-local-intc", +- .data = &argon_intc_name, +- }, +- { /* sentinel */ }, +-}; +- +-MODULE_DEVICE_TABLE(of, argon_mem_of_match); +- +-static struct platform_driver argon_mem_driver = { +- .probe = argon_mem_probe, +- .remove = argon_mem_remove, +- .driver = { +- .name = DRIVER_NAME, +- .owner = THIS_MODULE, +- .of_match_table = argon_mem_of_match, +- }, +-}; +- +-module_platform_driver(argon_mem_driver); +- +-MODULE_ALIAS("platform:argon-mem"); +-MODULE_LICENSE("GPL"); +-MODULE_DESCRIPTION("Driver for accessing Argon decoder registers from userspace"); +-MODULE_AUTHOR("Jonathan Bell "); +--- /dev/null ++++ b/drivers/char/broadcom/rpivid-mem.c +@@ -0,0 +1,272 @@ ++/** ++ * rpivid-mem.c - character device access to the RPiVid decoder registers ++ * ++ * Based on bcm2835-gpiomem.c. Provides IO memory access to the decoder ++ * register blocks such that ffmpeg plugins can access the hardware. ++ * ++ * Jonathan Bell ++ * Copyright (c) 2019, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "rpivid-mem" ++#define DEVICE_MINOR 0 ++ ++struct rpivid_mem_priv { ++ dev_t devid; ++ struct class *class; ++ struct cdev rpivid_mem_cdev; ++ unsigned long regs_phys; ++ unsigned long mem_window_len; ++ struct device *dev; ++ const char *name; ++}; ++ ++static int rpivid_mem_open(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ int ret = 0; ++ struct rpivid_mem_priv *priv; ++ if (dev != DEVICE_MINOR) ++ ret = -ENXIO; ++ ++ priv = container_of(inode->i_cdev, struct rpivid_mem_priv, ++ rpivid_mem_cdev); ++ if (!priv) ++ return -EINVAL; ++ file->private_data = priv; ++ return ret; ++} ++ ++static int rpivid_mem_release(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ int ret = 0; ++ ++ if (dev != DEVICE_MINOR) ++ ret = -ENXIO; ++ ++ return ret; ++} ++ ++static const struct vm_operations_struct rpivid_mem_vm_ops = { ++#ifdef CONFIG_HAVE_IOREMAP_PROT ++ .access = generic_access_phys ++#endif ++}; ++ ++static int rpivid_mem_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ struct rpivid_mem_priv *priv; ++ unsigned long pages; ++ ++ priv = file->private_data; ++ pages = priv->regs_phys >> PAGE_SHIFT; ++ /* ++ * The address decode is far larger than the actual number of registers. ++ * Just map the whole lot in. ++ */ ++ vma->vm_page_prot = phys_mem_access_prot(file, pages, ++ priv->mem_window_len, ++ vma->vm_page_prot); ++ vma->vm_ops = &rpivid_mem_vm_ops; ++ if (remap_pfn_range(vma, vma->vm_start, ++ pages, ++ priv->mem_window_len, ++ vma->vm_page_prot)) { ++ return -EAGAIN; ++ } ++ return 0; ++} ++ ++static const struct file_operations ++rpivid_mem_fops = { ++ .owner = THIS_MODULE, ++ .open = rpivid_mem_open, ++ .release = rpivid_mem_release, ++ .mmap = rpivid_mem_mmap, ++}; ++ ++static const struct of_device_id rpivid_mem_of_match[]; ++static int rpivid_mem_probe(struct platform_device *pdev) ++{ ++ int err; ++ void *ptr_err; ++ const struct of_device_id *id; ++ struct device *dev = &pdev->dev; ++ struct device *rpivid_mem_dev; ++ struct resource *ioresource; ++ struct rpivid_mem_priv *priv; ++ ++ ++ /* Allocate buffers and instance data */ ++ ++ priv = kzalloc(sizeof(struct rpivid_mem_priv), GFP_KERNEL); ++ ++ if (!priv) { ++ err = -ENOMEM; ++ goto failed_inst_alloc; ++ } ++ platform_set_drvdata(pdev, priv); ++ ++ priv->dev = dev; ++ id = of_match_device(rpivid_mem_of_match, dev); ++ if (!id) ++ return -EINVAL; ++ priv->name = id->data; ++ ++ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (ioresource) { ++ priv->regs_phys = ioresource->start; ++ priv->mem_window_len = ioresource->end - ioresource->start; ++ } else { ++ dev_err(priv->dev, "failed to get IO resource"); ++ err = -ENOENT; ++ goto failed_get_resource; ++ } ++ ++ /* Create character device entries */ ++ ++ err = alloc_chrdev_region(&priv->devid, ++ DEVICE_MINOR, 1, priv->name); ++ if (err != 0) { ++ dev_err(priv->dev, "unable to allocate device number"); ++ goto failed_alloc_chrdev; ++ } ++ cdev_init(&priv->rpivid_mem_cdev, &rpivid_mem_fops); ++ priv->rpivid_mem_cdev.owner = THIS_MODULE; ++ err = cdev_add(&priv->rpivid_mem_cdev, priv->devid, 1); ++ if (err != 0) { ++ dev_err(priv->dev, "unable to register device"); ++ goto failed_cdev_add; ++ } ++ ++ /* Create sysfs entries */ ++ ++ priv->class = class_create(THIS_MODULE, priv->name); ++ ptr_err = priv->class; ++ if (IS_ERR(ptr_err)) ++ goto failed_class_create; ++ ++ rpivid_mem_dev = device_create(priv->class, NULL, ++ priv->devid, NULL, ++ priv->name); ++ ptr_err = rpivid_mem_dev; ++ if (IS_ERR(ptr_err)) ++ goto failed_device_create; ++ ++ dev_info(priv->dev, "%s initialised: Registers at 0x%08lx length 0x%08lx", ++ priv->name, priv->regs_phys, priv->mem_window_len); ++ ++ return 0; ++ ++failed_device_create: ++ class_destroy(priv->class); ++failed_class_create: ++ cdev_del(&priv->rpivid_mem_cdev); ++ err = PTR_ERR(ptr_err); ++failed_cdev_add: ++ unregister_chrdev_region(priv->devid, 1); ++failed_alloc_chrdev: ++failed_get_resource: ++ kfree(priv); ++failed_inst_alloc: ++ dev_err(priv->dev, "could not load rpivid_mem"); ++ return err; ++} ++ ++static int rpivid_mem_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct rpivid_mem_priv *priv = platform_get_drvdata(pdev); ++ ++ device_destroy(priv->class, priv->devid); ++ class_destroy(priv->class); ++ cdev_del(&priv->rpivid_mem_cdev); ++ unregister_chrdev_region(priv->devid, 1); ++ kfree(priv); ++ ++ dev_info(dev, "%s driver removed - OK", priv->name); ++ return 0; ++} ++ ++static const struct of_device_id rpivid_mem_of_match[] = { ++ { ++ .compatible = "raspberrypi,rpivid-hevc-decoder", ++ .data = "rpivid-hevcmem", ++ }, ++ { ++ .compatible = "raspberrypi,rpivid-h264-decoder", ++ .data = "rpivid-h264mem", ++ }, ++ { ++ .compatible = "raspberrypi,rpivid-vp9-decoder", ++ .data = "rpivid-vp9mem", ++ }, ++ /* The "intc" is included as this block of hardware contains the ++ * "frame done" status flags. ++ */ ++ { ++ .compatible = "raspberrypi,rpivid-local-intc", ++ .data = "rpivid-intcmem", ++ }, ++ { /* sentinel */ }, ++}; ++ ++MODULE_DEVICE_TABLE(of, rpivid_mem_of_match); ++ ++static struct platform_driver rpivid_mem_driver = { ++ .probe = rpivid_mem_probe, ++ .remove = rpivid_mem_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = rpivid_mem_of_match, ++ }, ++}; ++ ++module_platform_driver(rpivid_mem_driver); ++ ++MODULE_ALIAS("platform:rpivid-mem"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Driver for accessing RPiVid decoder registers from userspace"); ++MODULE_AUTHOR("Jonathan Bell "); +--- a/drivers/mfd/bcm2835-pm.c ++++ b/drivers/mfd/bcm2835-pm.c +@@ -50,14 +50,14 @@ static int bcm2835_pm_probe(struct platf + if (ret) + return ret; + +- /* Map the ARGON ASB regs if present. */ ++ /* Map the RPiVid ASB regs if present. */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + if (res) { +- pm->arg_asb = devm_ioremap_resource(dev, res); +- if (IS_ERR(pm->arg_asb)) { +- dev_err(dev, "Failed to map ARGON ASB: %ld\n", +- PTR_ERR(pm->arg_asb)); +- return PTR_ERR(pm->arg_asb); ++ pm->rpivid_asb = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pm->rpivid_asb)) { ++ dev_err(dev, "Failed to map RPiVid ASB: %ld\n", ++ PTR_ERR(pm->rpivid_asb)); ++ return PTR_ERR(pm->rpivid_asb); + } + } + +--- a/drivers/soc/bcm/bcm2835-power.c ++++ b/drivers/soc/bcm/bcm2835-power.c +@@ -637,15 +637,15 @@ static int bcm2835_power_probe(struct pl + power->base = pm->base; + power->asb = pm->asb; + +- /* 2711 hack: the new ARGON ASB took over V3D, which is our ++ /* 2711 hack: the new RPiVid ASB took over V3D, which is our + * only consumer of this driver so far. The old ASB seems to + * still be present with ISP and H264 bits but no V3D, but I + * don't know if that's real or not. The V3D is in the same + * place in the new ASB as the old one, so just poke the new + * one for now. + */ +- if (pm->arg_asb) { +- power->asb = pm->arg_asb; ++ if (pm->rpivid_asb) { ++ power->asb = pm->rpivid_asb; + power->is_2711 = true; + } + +--- a/include/linux/mfd/bcm2835-pm.h ++++ b/include/linux/mfd/bcm2835-pm.h +@@ -9,7 +9,7 @@ struct bcm2835_pm { + struct device *dev; + void __iomem *base; + void __iomem *asb; +- void __iomem *arg_asb; ++ void __iomem *rpivid_asb; + }; + + #endif /* BCM2835_MFD_PM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0665-driver-char-rpivid-also-support-legacy-name.patch b/target/linux/brcm2708/patches-4.19/950-0665-driver-char-rpivid-also-support-legacy-name.patch new file mode 100644 index 0000000000..34dd24208c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0665-driver-char-rpivid-also-support-legacy-name.patch @@ -0,0 +1,71 @@ +From 80c20ff00542b050733780ae6088e50663ee8d78 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 29 Jul 2019 12:03:21 +0100 +Subject: [PATCH] driver: char: rpivid - also support legacy name + +Provide transitional support for the previous names of +the character devices. + +Signed-off-by: Phil Elwell +--- + drivers/char/broadcom/rpivid-mem.c | 22 ++++++++++++++++++---- + 1 file changed, 18 insertions(+), 4 deletions(-) + +--- a/drivers/char/broadcom/rpivid-mem.c ++++ b/drivers/char/broadcom/rpivid-mem.c +@@ -66,7 +66,7 @@ static int rpivid_mem_open(struct inode + int dev = iminor(inode); + int ret = 0; + struct rpivid_mem_priv *priv; +- if (dev != DEVICE_MINOR) ++ if (dev != DEVICE_MINOR && dev != DEVICE_MINOR + 1) + ret = -ENXIO; + + priv = container_of(inode->i_cdev, struct rpivid_mem_priv, +@@ -82,7 +82,7 @@ static int rpivid_mem_release(struct ino + int dev = iminor(inode); + int ret = 0; + +- if (dev != DEVICE_MINOR) ++ if (dev != DEVICE_MINOR && dev != DEVICE_MINOR + 1) + ret = -ENXIO; + + return ret; +@@ -167,14 +167,14 @@ static int rpivid_mem_probe(struct platf + /* Create character device entries */ + + err = alloc_chrdev_region(&priv->devid, +- DEVICE_MINOR, 1, priv->name); ++ DEVICE_MINOR, 2, priv->name); + if (err != 0) { + dev_err(priv->dev, "unable to allocate device number"); + goto failed_alloc_chrdev; + } + cdev_init(&priv->rpivid_mem_cdev, &rpivid_mem_fops); + priv->rpivid_mem_cdev.owner = THIS_MODULE; +- err = cdev_add(&priv->rpivid_mem_cdev, priv->devid, 1); ++ err = cdev_add(&priv->rpivid_mem_cdev, priv->devid, 2); + if (err != 0) { + dev_err(priv->dev, "unable to register device"); + goto failed_cdev_add; +@@ -194,6 +194,20 @@ static int rpivid_mem_probe(struct platf + if (IS_ERR(ptr_err)) + goto failed_device_create; + ++ /* Legacy alias */ ++ { ++ char *oldname = kstrdup(priv->name, GFP_KERNEL); ++ ++ oldname[1] = 'a'; ++ oldname[2] = 'r'; ++ oldname[3] = 'g'; ++ oldname[4] = 'o'; ++ oldname[5] = 'n'; ++ (void)device_create(priv->class, NULL, priv->devid + 1, NULL, ++ oldname + 1); ++ kfree(oldname); ++ } ++ + dev_info(priv->dev, "%s initialised: Registers at 0x%08lx length 0x%08lx", + priv->name, priv->regs_phys, priv->mem_window_len); + diff --git a/target/linux/brcm2708/patches-4.19/950-0665-overlays-Fix-compatible-string-for-ds1307-RTC.patch b/target/linux/brcm2708/patches-4.19/950-0665-overlays-Fix-compatible-string-for-ds1307-RTC.patch deleted file mode 100644 index f1279f6ca0..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0665-overlays-Fix-compatible-string-for-ds1307-RTC.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 4a5715f95d8865c817c9a747f28f38b234f5df42 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 17 Jun 2019 14:36:12 +0100 -Subject: [PATCH 665/806] overlays: Fix compatible string for ds1307 RTC - -Kernels since 4.19 have required the correct manufacture name in the -compatible string for I2C devices, and unfortunately the one for the -Dallas/Maxim DS1307 should have been "dallas,ds1307" and not -"maxim,ds1307". - -See: https://github.com/raspberrypi/linux/issues/3013 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -@@ -30,7 +30,7 @@ - status = "okay"; - - ds1307: ds1307@68 { -- compatible = "maxim,ds1307"; -+ compatible = "dallas,ds1307"; - reg = <0x68>; - status = "okay"; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0666-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch b/target/linux/brcm2708/patches-4.19/950-0666-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch new file mode 100644 index 0000000000..8c00945122 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0666-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch @@ -0,0 +1,63 @@ +From 16c1e20b50e121f836f434bb6c22c73e2f51d29f Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Thu, 1 Aug 2019 16:41:20 +0100 +Subject: [PATCH] hid: usb: Add device quirks for Freeway Airmouse T3 + and MX3 + +These wireless mouse/keyboard combo remote control devices specify +multiple "wheel" events in their report descriptors. The wheel events +are incorrectly defined and apparently map to accelerometer data, leading +to spurious mouse scroll events being generated at an extreme rate when +the device is moved. + +As a workaround, use HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE to mask +feeding the extra wheel events to the input subsystem. + +See: https://github.com/raspberrypi/firmware/issues/1189 + +Signed-off-by: Jonathan Bell +--- + drivers/hid/hid-ids.h | 6 ++++++ + drivers/hid/hid-quirks.c | 2 ++ + 2 files changed, 8 insertions(+) + +--- a/drivers/hid/hid-ids.h ++++ b/drivers/hid/hid-ids.h +@@ -222,6 +222,9 @@ + #define USB_VENDOR_ID_BAANTO 0x2453 + #define USB_DEVICE_ID_BAANTO_MT_190W2 0x0100 + ++#define USB_VENDOR_ID_BEKEN 0x25a7 ++#define USB_DEVICE_ID_AIRMOUSE_T3 0x2402 ++ + #define USB_VENDOR_ID_BELKIN 0x050d + #define USB_DEVICE_ID_FLIP_KVM 0x3201 + +@@ -1192,6 +1195,9 @@ + #define USB_VENDOR_ID_XAT 0x2505 + #define USB_DEVICE_ID_XAT_CSR 0x0220 + ++#define USB_VENDOR_ID_XENTA 0x1d57 ++#define USB_DEVICE_ID_AIRMOUSE_MX3 0xad03 ++ + #define USB_VENDOR_ID_XIN_MO 0x16c0 + #define USB_DEVICE_ID_XIN_MO_DUAL_ARCADE 0x05e1 + #define USB_DEVICE_ID_THT_2P_ARCADE 0x75e1 +--- a/drivers/hid/hid-quirks.c ++++ b/drivers/hid/hid-quirks.c +@@ -43,6 +43,7 @@ static const struct hid_device_id hid_qu + { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682), HID_QUIRK_NOGET }, + { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS692), HID_QUIRK_NOGET }, + { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM), HID_QUIRK_NOGET }, ++ { HID_USB_DEVICE(USB_VENDOR_ID_BEKEN, USB_DEVICE_ID_AIRMOUSE_T3), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, + { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH), HID_QUIRK_MULTI_INPUT }, + { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE2), HID_QUIRK_ALWAYS_POLL }, +@@ -174,6 +175,7 @@ static const struct hid_device_id hid_qu + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET), HID_QUIRK_MULTI_INPUT }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD2, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS), HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD), HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, ++ { HID_USB_DEVICE(USB_VENDOR_ID_XENTA, USB_DEVICE_ID_AIRMOUSE_MX3), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, + + { 0 } + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0666-overlays-Fix-further-maxim-ds1307-references.patch b/target/linux/brcm2708/patches-4.19/950-0666-overlays-Fix-further-maxim-ds1307-references.patch deleted file mode 100644 index 703d92dcc7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0666-overlays-Fix-further-maxim-ds1307-references.patch +++ /dev/null @@ -1,47 +0,0 @@ -From ff25f8c70fd995e4f76a3c1245556cc0ec3db19d Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 18 Jun 2019 11:16:13 +0100 -Subject: [PATCH 666/806] overlays: Fix further maxim,ds1307 references - -See: https://github.com/raspberrypi/linux/issues/3013 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/balena-fin-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/tinylcd35-overlay.dts | 2 +- - 3 files changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -@@ -84,7 +84,7 @@ - - // rtc clock - ds1307: ds1307@68 { -- compatible = "maxim,ds1307"; -+ compatible = "dallas,ds1307"; - reg = <0x68>; - status = "okay"; - }; ---- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -@@ -46,7 +46,7 @@ - status = "okay"; - - ds1307: ds1307@68 { -- compatible = "maxim,ds1307"; -+ compatible = "dallas,ds1307"; - reg = <0x68>; - status = "okay"; - }; ---- a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts -+++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts -@@ -155,7 +155,7 @@ - status = "okay"; - - ds1307: ds1307@68 { -- compatible = "maxim,ds1307"; -+ compatible = "dallas,ds1307"; - reg = <0x68>; - status = "okay"; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0667-drm-vc4-Add-Broadcast-RGB-connector-property.patch b/target/linux/brcm2708/patches-4.19/950-0667-drm-vc4-Add-Broadcast-RGB-connector-property.patch new file mode 100644 index 0000000000..26da5d94f2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0667-drm-vc4-Add-Broadcast-RGB-connector-property.patch @@ -0,0 +1,302 @@ +From b96e24487cc48a2cb593f27c24074087a21de848 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 14 Jun 2019 10:12:07 +0100 +Subject: [PATCH] drm/vc4: Add "Broadcast RGB" connector property + +Some HDMI monitors do not abide by the full or limited +(16-235) range RGB flags in the AVI infoframe. This can +result in images looking washed out (if given limited and +interpreting as full), or detail disappearing at the extremes +(given full and interpreting as limited). + +Copy the Intel i915 driver's approach of adding an override +property ("Broadcast RGB") to force one mode or the other. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 190 +++++++++++++++++++++++-- + 1 file changed, 177 insertions(+), 13 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -285,6 +285,13 @@ to_vc4_fkms_encoder(struct drm_encoder * + return container_of(encoder, struct vc4_fkms_encoder, base); + } + ++/* "Broadcast RGB" property. ++ * Allows overriding of HDMI full or limited range RGB ++ */ ++#define VC4_BROADCAST_RGB_AUTO 0 ++#define VC4_BROADCAST_RGB_FULL 1 ++#define VC4_BROADCAST_RGB_LIMITED 2 ++ + /* VC4 FKMS connector KMS struct */ + struct vc4_fkms_connector { + struct drm_connector base; +@@ -297,6 +304,8 @@ struct vc4_fkms_connector { + struct vc4_dev *vc4_dev; + u32 display_number; + u32 display_type; ++ ++ struct drm_property *broadcast_rgb_property; + }; + + static inline struct vc4_fkms_connector * +@@ -305,6 +314,16 @@ to_vc4_fkms_connector(struct drm_connect + return container_of(connector, struct vc4_fkms_connector, base); + } + ++/* VC4 FKMS connector state */ ++struct vc4_fkms_connector_state { ++ struct drm_connector_state base; ++ ++ int broadcast_rgb; ++}; ++ ++#define to_vc4_fkms_connector_state(x) \ ++ container_of(x, struct vc4_fkms_connector_state, base) ++ + static u32 vc4_get_display_type(u32 display_number) + { + const u32 display_types[] = { +@@ -832,8 +851,6 @@ static void vc4_crtc_mode_set_nofb(struc + mode->picture_aspect_ratio, mode->flags); + mb.timings.display = vc4_crtc->display_number; + +- mb.timings.video_id_code = frame.avi.video_code; +- + mb.timings.clock = mode->clock; + mb.timings.hdisplay = mode->hdisplay; + mb.timings.hsync_start = mode->hsync_start; +@@ -871,11 +888,30 @@ static void vc4_crtc_mode_set_nofb(struc + break; + } + +- if (!vc4_encoder->hdmi_monitor) ++ if (!vc4_encoder->hdmi_monitor) { + mb.timings.flags |= TIMINGS_FLAGS_DVI; +- else if (drm_default_rgb_quant_range(mode) == ++ mb.timings.video_id_code = frame.avi.video_code; ++ } else { ++ struct vc4_fkms_connector_state *conn_state = ++ to_vc4_fkms_connector_state(vc4_crtc->connector->state); ++ ++ /* Do not provide a VIC as the HDMI spec requires that we do not ++ * signal the opposite of the defined range in the AVI ++ * infoframe. ++ */ ++ mb.timings.video_id_code = 0; ++ ++ if (conn_state->broadcast_rgb == VC4_BROADCAST_RGB_AUTO) { ++ /* See CEA-861-E - 5.1 Default Encoding Parameters */ ++ if (drm_default_rgb_quant_range(mode) == + HDMI_QUANTIZATION_RANGE_LIMITED) +- mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; ++ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; ++ } else { ++ if (conn_state->broadcast_rgb == ++ VC4_BROADCAST_RGB_LIMITED) ++ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; ++ } ++ } + + /* + FIXME: To implement +@@ -1340,13 +1376,95 @@ static void vc4_fkms_connector_destroy(s + drm_connector_cleanup(connector); + } + ++/** ++ * vc4_connector_duplicate_state - duplicate connector state ++ * @connector: digital connector ++ * ++ * Allocates and returns a copy of the connector state (both common and ++ * digital connector specific) for the specified connector. ++ * ++ * Returns: The newly allocated connector state, or NULL on failure. ++ */ ++struct drm_connector_state * ++vc4_connector_duplicate_state(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector_state *state; ++ ++ state = kmemdup(connector->state, sizeof(*state), GFP_KERNEL); ++ if (!state) ++ return NULL; ++ ++ __drm_atomic_helper_connector_duplicate_state(connector, &state->base); ++ return &state->base; ++} ++ ++/** ++ * vc4_connector_atomic_get_property - hook for connector->atomic_get_property. ++ * @connector: Connector to get the property for. ++ * @state: Connector state to retrieve the property from. ++ * @property: Property to retrieve. ++ * @val: Return value for the property. ++ * ++ * Returns the atomic property value for a digital connector. ++ */ ++int vc4_connector_atomic_get_property(struct drm_connector *connector, ++ const struct drm_connector_state *state, ++ struct drm_property *property, ++ uint64_t *val) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct vc4_fkms_connector_state *vc4_conn_state = ++ to_vc4_fkms_connector_state(state); ++ ++ if (property == fkms_connector->broadcast_rgb_property) { ++ *val = vc4_conn_state->broadcast_rgb; ++ } else { ++ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", ++ property->base.id, property->name); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * vc4_connector_atomic_set_property - hook for connector->atomic_set_property. ++ * @connector: Connector to set the property for. ++ * @state: Connector state to set the property on. ++ * @property: Property to set. ++ * @val: New value for the property. ++ * ++ * Sets the atomic property value for a digital connector. ++ */ ++int vc4_connector_atomic_set_property(struct drm_connector *connector, ++ struct drm_connector_state *state, ++ struct drm_property *property, ++ uint64_t val) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct vc4_fkms_connector_state *vc4_conn_state = ++ to_vc4_fkms_connector_state(state); ++ ++ if (property == fkms_connector->broadcast_rgb_property) { ++ vc4_conn_state->broadcast_rgb = val; ++ return 0; ++ } ++ ++ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", ++ property->base.id, property->name); ++ return -EINVAL; ++} ++ + static const struct drm_connector_funcs vc4_fkms_connector_funcs = { + .detect = vc4_fkms_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = vc4_fkms_connector_destroy, +- .reset = drm_atomic_helper_connector_reset, +- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, ++ .atomic_duplicate_state = vc4_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++ .atomic_get_property = vc4_connector_atomic_get_property, ++ .atomic_set_property = vc4_connector_atomic_set_property, + }; + + static const struct drm_connector_helper_funcs vc4_fkms_connector_helper_funcs = { +@@ -1359,12 +1477,40 @@ static const struct drm_connector_helper + .best_encoder = vc4_fkms_connector_best_encoder, + }; + ++static const struct drm_prop_enum_list broadcast_rgb_names[] = { ++ { VC4_BROADCAST_RGB_AUTO, "Automatic" }, ++ { VC4_BROADCAST_RGB_FULL, "Full" }, ++ { VC4_BROADCAST_RGB_LIMITED, "Limited 16:235" }, ++}; ++ ++static void ++vc4_attach_broadcast_rgb_property(struct vc4_fkms_connector *fkms_connector) ++{ ++ struct drm_device *dev = fkms_connector->base.dev; ++ struct drm_property *prop; ++ ++ prop = fkms_connector->broadcast_rgb_property; ++ if (!prop) { ++ prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, ++ "Broadcast RGB", ++ broadcast_rgb_names, ++ ARRAY_SIZE(broadcast_rgb_names)); ++ if (!prop) ++ return; ++ ++ fkms_connector->broadcast_rgb_property = prop; ++ } ++ ++ drm_object_attach_property(&fkms_connector->base.base, prop, 0); ++} ++ + static struct drm_connector * + vc4_fkms_connector_init(struct drm_device *dev, struct drm_encoder *encoder, + u32 display_num) + { + struct drm_connector *connector = NULL; + struct vc4_fkms_connector *fkms_connector; ++ struct vc4_fkms_connector_state *conn_state = NULL; + struct vc4_dev *vc4_dev = to_vc4_dev(dev); + int ret = 0; + +@@ -1373,9 +1519,18 @@ vc4_fkms_connector_init(struct drm_devic + fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), + GFP_KERNEL); + if (!fkms_connector) { +- ret = -ENOMEM; +- goto fail; ++ return ERR_PTR(-ENOMEM); ++ } ++ ++ /* ++ * Allocate enough memory to hold vc4_fkms_connector_state, ++ */ ++ conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL); ++ if (!conn_state) { ++ kfree(fkms_connector); ++ return ERR_PTR(-ENOMEM); + } ++ + connector = &fkms_connector->base; + + fkms_connector->encoder = encoder; +@@ -1383,6 +1538,9 @@ vc4_fkms_connector_init(struct drm_devic + fkms_connector->display_type = vc4_get_display_type(display_num); + fkms_connector->vc4_dev = vc4_dev; + ++ __drm_atomic_helper_connector_reset(connector, ++ &conn_state->base); ++ + if (fkms_connector->display_type == DRM_MODE_ENCODER_DSI) { + drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, + DRM_MODE_CONNECTOR_DSI); +@@ -1403,10 +1561,14 @@ vc4_fkms_connector_init(struct drm_devic + connector->interlace_allowed = 0; + } + +- /* Create and attach TV margin props to this connector. */ +- ret = drm_mode_create_tv_margin_properties(dev); +- if (ret) +- return ERR_PTR(ret); ++ /* Create and attach TV margin props to this connector. ++ * Already done for SDTV outputs. ++ */ ++ if (fkms_connector->display_type != DRM_MODE_ENCODER_TVDAC) { ++ ret = drm_mode_create_tv_margin_properties(dev); ++ if (ret) ++ goto fail; ++ } + + drm_connector_attach_tv_margin_properties(connector); + +@@ -1415,6 +1577,8 @@ vc4_fkms_connector_init(struct drm_devic + + connector->doublescan_allowed = 0; + ++ vc4_attach_broadcast_rgb_property(fkms_connector); ++ + drm_connector_attach_encoder(connector, encoder); + + return connector; diff --git a/target/linux/brcm2708/patches-4.19/950-0667-overlays-Cosmetic-change-to-upstream-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0667-overlays-Cosmetic-change-to-upstream-overlay.patch deleted file mode 100644 index 34272ca87f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0667-overlays-Cosmetic-change-to-upstream-overlay.patch +++ /dev/null @@ -1,25 +0,0 @@ -From ce7469a397da34a19112b8d14eb283e02088755b Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 18 Jun 2019 11:19:59 +0100 -Subject: [PATCH 667/806] overlays: Cosmetic change to upstream overlay - -The dwc2 overlay no longer uses the dwc2_usb label, and the latest -ovmerge (which generates the upstream overlay) removes unused labels. -Update the checked-in version to match. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/upstream-overlay.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/upstream-overlay.dts -+++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts -@@ -113,7 +113,7 @@ - target = <&usb>; - #address-cells = <1>; - #size-cells = <1>; -- dwc2_usb: __overlay__ { -+ __overlay__ { - compatible = "brcm,bcm2835-usb"; - dr_mode = "otg"; - g-np-tx-fifo-size = <32>; diff --git a/target/linux/brcm2708/patches-4.19/950-0668-drm-connector-Add-documentation-for-drm_cmdline_mode.patch b/target/linux/brcm2708/patches-4.19/950-0668-drm-connector-Add-documentation-for-drm_cmdline_mode.patch new file mode 100644 index 0000000000..16b84bc037 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0668-drm-connector-Add-documentation-for-drm_cmdline_mode.patch @@ -0,0 +1,125 @@ +From 7c0f4f4d81958f63abf696e71b342e8b75a6e530 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 19 Jun 2019 12:17:48 +0200 +Subject: [PATCH] drm/connector: Add documentation for drm_cmdline_mode +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +commit 772cd52c5574b04b00a97d638b2cfe94c0c1a9b6 upstream. + +The struct drm_cmdline_mode holds the result of the command line parsers. +However, it wasn't documented so far, so let's do that. + +Reviewed-by: Noralf Trønnes +Signed-off-by: Maxime Ripard +Link: https://patchwork.freedesktop.org/patch/msgid/963c893c16c6a25fc469b53c726f493d99bdc578.1560783090.git-series.maxime.ripard@bootlin.com +--- + include/drm/drm_connector.h | 86 ++++++++++++++++++++++++++++++++++++- + 1 file changed, 84 insertions(+), 2 deletions(-) + +--- a/include/drm/drm_connector.h ++++ b/include/drm/drm_connector.h +@@ -755,18 +755,100 @@ struct drm_connector_funcs { + const struct drm_connector_state *state); + }; + +-/* mode specified on the command line */ ++/** ++ * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line ++ * ++ * Each connector can have an initial mode with additional options ++ * passed through the kernel command line. This structure allows to ++ * express those parameters and will be filled by the command-line ++ * parser. ++ */ + struct drm_cmdline_mode { ++ /** ++ * @specified: ++ * ++ * Has a mode been read from the command-line? ++ */ + bool specified; ++ ++ /** ++ * @refresh_specified: ++ * ++ * Did the mode have a preferred refresh rate? ++ */ + bool refresh_specified; ++ ++ /** ++ * @bpp_specified: ++ * ++ * Did the mode have a preferred BPP? ++ */ + bool bpp_specified; +- int xres, yres; ++ ++ /** ++ * @xres: ++ * ++ * Active resolution on the X axis, in pixels. ++ */ ++ int xres; ++ ++ /** ++ * @yres: ++ * ++ * Active resolution on the Y axis, in pixels. ++ */ ++ int yres; ++ ++ /** ++ * @bpp: ++ * ++ * Bits per pixels for the mode. ++ */ + int bpp; ++ ++ /** ++ * @refresh: ++ * ++ * Refresh rate, in Hertz. ++ */ + int refresh; ++ ++ /** ++ * @rb: ++ * ++ * Do we need to use reduced blanking? ++ */ + bool rb; ++ ++ /** ++ * @interlace: ++ * ++ * The mode is interlaced. ++ */ + bool interlace; ++ ++ /** ++ * @cvt: ++ * ++ * The timings will be calculated using the VESA Coordinated ++ * Video Timings instead of looking up the mode from a table. ++ */ + bool cvt; ++ ++ /** ++ * @margins: ++ * ++ * Add margins to the mode calculation (1.8% of xres rounded ++ * down to 8 pixels and 1.8% of yres). ++ */ + bool margins; ++ ++ /** ++ * @force: ++ * ++ * Ignore the hotplug state of the connector, and force its ++ * state to one of the DRM_FORCE_* values. ++ */ + enum drm_connector_force force; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0668-w1-ds2805-rename-w1_family-struct-fixing-c-p-typo.patch b/target/linux/brcm2708/patches-4.19/950-0668-w1-ds2805-rename-w1_family-struct-fixing-c-p-typo.patch deleted file mode 100644 index 353a71d66a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0668-w1-ds2805-rename-w1_family-struct-fixing-c-p-typo.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 4f1fd30b76c1bec76069483b88747783a0654f38 Mon Sep 17 00:00:00 2001 -From: Mariusz Bialonczyk -Date: Sat, 25 May 2019 10:45:38 +0200 -Subject: [PATCH 668/806] w1: ds2805: rename w1_family struct, fixing c-p typo - -commit 0e3743d870711ae4daf1e7170c8d9381564e244d upstream. - -The ds2805 has a structure named: w1_family_2d, which surely -comes from a w1_ds2431 module. This commit fixes this name to -prevent confusion and mark a correct family name. - -Signed-off-by: Mariusz Bialonczyk -Signed-off-by: Greg Kroah-Hartman ---- - drivers/w1/slaves/w1_ds2805.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/w1/slaves/w1_ds2805.c -+++ b/drivers/w1/slaves/w1_ds2805.c -@@ -288,7 +288,7 @@ static struct w1_family_ops w1_f0d_fops - .remove_slave = w1_f0d_remove_slave, - }; - --static struct w1_family w1_family_2d = { -+static struct w1_family w1_family_0d = { - .fid = W1_EEPROM_DS2805, - .fops = &w1_f0d_fops, - }; -@@ -296,13 +296,13 @@ static struct w1_family w1_family_2d = { - static int __init w1_f0d_init(void) - { - pr_info("%s()\n", __func__); -- return w1_register_family(&w1_family_2d); -+ return w1_register_family(&w1_family_0d); - } - - static void __exit w1_f0d_fini(void) - { - pr_info("%s()\n", __func__); -- w1_unregister_family(&w1_family_2d); -+ w1_unregister_family(&w1_family_0d); - } - - module_init(w1_f0d_init); diff --git a/target/linux/brcm2708/patches-4.19/950-0669-drm-modes-Rewrite-the-command-line-parser.patch b/target/linux/brcm2708/patches-4.19/950-0669-drm-modes-Rewrite-the-command-line-parser.patch new file mode 100644 index 0000000000..24c25d6944 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0669-drm-modes-Rewrite-the-command-line-parser.patch @@ -0,0 +1,392 @@ +From 3508a8548f13be68b6d098ad99a7bc1fc1810f76 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 19 Jun 2019 12:17:49 +0200 +Subject: [PATCH] drm/modes: Rewrite the command line parser +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +commit e08ab74bd4c7a5fe311bc05f32dbb4f1e7fa3428 upstream. + +Rewrite the command line parser in order to get away from the state machine +parsing the video mode lines. + +Hopefully, this will allow to extend it more easily to support named modes +and / or properties set directly on the command line. + +Reviewed-by: Noralf Trønnes +Signed-off-by: Maxime Ripard +Link: https://patchwork.freedesktop.org/patch/msgid/e32cd4009153b184103554009135c7bf7c9975d7.1560783090.git-series.maxime.ripard@bootlin.com +--- + drivers/gpu/drm/drm_modes.c | 325 +++++++++++++++++++++++------------- + 1 file changed, 210 insertions(+), 115 deletions(-) + +--- a/drivers/gpu/drm/drm_modes.c ++++ b/drivers/gpu/drm/drm_modes.c +@@ -30,6 +30,7 @@ + * authorization from the copyright holder(s) and author(s). + */ + ++#include + #include + #include + #include +@@ -1414,6 +1415,151 @@ void drm_connector_list_update(struct dr + } + EXPORT_SYMBOL(drm_connector_list_update); + ++static int drm_mode_parse_cmdline_bpp(const char *str, char **end_ptr, ++ struct drm_cmdline_mode *mode) ++{ ++ unsigned int bpp; ++ ++ if (str[0] != '-') ++ return -EINVAL; ++ ++ str++; ++ bpp = simple_strtol(str, end_ptr, 10); ++ if (*end_ptr == str) ++ return -EINVAL; ++ ++ mode->bpp = bpp; ++ mode->bpp_specified = true; ++ ++ return 0; ++} ++ ++static int drm_mode_parse_cmdline_refresh(const char *str, char **end_ptr, ++ struct drm_cmdline_mode *mode) ++{ ++ unsigned int refresh; ++ ++ if (str[0] != '@') ++ return -EINVAL; ++ ++ str++; ++ refresh = simple_strtol(str, end_ptr, 10); ++ if (*end_ptr == str) ++ return -EINVAL; ++ ++ mode->refresh = refresh; ++ mode->refresh_specified = true; ++ ++ return 0; ++} ++ ++static int drm_mode_parse_cmdline_extra(const char *str, int length, ++ struct drm_connector *connector, ++ struct drm_cmdline_mode *mode) ++{ ++ int i; ++ ++ for (i = 0; i < length; i++) { ++ switch (str[i]) { ++ case 'i': ++ mode->interlace = true; ++ break; ++ case 'm': ++ mode->margins = true; ++ break; ++ case 'D': ++ if (mode->force != DRM_FORCE_UNSPECIFIED) ++ return -EINVAL; ++ ++ if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) && ++ (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) ++ mode->force = DRM_FORCE_ON; ++ else ++ mode->force = DRM_FORCE_ON_DIGITAL; ++ break; ++ case 'd': ++ if (mode->force != DRM_FORCE_UNSPECIFIED) ++ return -EINVAL; ++ ++ mode->force = DRM_FORCE_OFF; ++ break; ++ case 'e': ++ if (mode->force != DRM_FORCE_UNSPECIFIED) ++ return -EINVAL; ++ ++ mode->force = DRM_FORCE_ON; ++ break; ++ default: ++ return -EINVAL; ++ } ++ } ++ ++ return 0; ++} ++ ++static int drm_mode_parse_cmdline_res_mode(const char *str, unsigned int length, ++ bool extras, ++ struct drm_connector *connector, ++ struct drm_cmdline_mode *mode) ++{ ++ const char *str_start = str; ++ bool rb = false, cvt = false; ++ int xres = 0, yres = 0; ++ int remaining, i; ++ char *end_ptr; ++ ++ xres = simple_strtol(str, &end_ptr, 10); ++ if (end_ptr == str) ++ return -EINVAL; ++ ++ if (end_ptr[0] != 'x') ++ return -EINVAL; ++ end_ptr++; ++ ++ str = end_ptr; ++ yres = simple_strtol(str, &end_ptr, 10); ++ if (end_ptr == str) ++ return -EINVAL; ++ ++ remaining = length - (end_ptr - str_start); ++ if (remaining < 0) ++ return -EINVAL; ++ ++ for (i = 0; i < remaining; i++) { ++ switch (end_ptr[i]) { ++ case 'M': ++ cvt = true; ++ break; ++ case 'R': ++ rb = true; ++ break; ++ default: ++ /* ++ * Try to pass that to our extras parsing ++ * function to handle the case where the ++ * extras are directly after the resolution ++ */ ++ if (extras) { ++ int ret = drm_mode_parse_cmdline_extra(end_ptr + i, ++ 1, ++ connector, ++ mode); ++ if (ret) ++ return ret; ++ } else { ++ return -EINVAL; ++ } ++ } ++ } ++ ++ mode->xres = xres; ++ mode->yres = yres; ++ mode->cvt = cvt; ++ mode->rb = rb; ++ ++ return 0; ++} ++ + /** + * drm_mode_parse_command_line_for_connector - parse command line modeline for connector + * @mode_option: optional per connector mode option +@@ -1440,13 +1586,12 @@ bool drm_mode_parse_command_line_for_con + struct drm_cmdline_mode *mode) + { + const char *name; +- unsigned int namelen; +- bool res_specified = false, bpp_specified = false, refresh_specified = false; +- unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0; +- bool yres_specified = false, cvt = false, rb = false; +- bool interlace = false, margins = false, was_digit = false; +- int i; +- enum drm_connector_force force = DRM_FORCE_UNSPECIFIED; ++ bool parse_extras = false; ++ unsigned int bpp_off = 0, refresh_off = 0; ++ unsigned int mode_end = 0; ++ char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL; ++ char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL; ++ int ret; + + #ifdef CONFIG_FB + if (!mode_option) +@@ -1459,127 +1604,77 @@ bool drm_mode_parse_command_line_for_con + } + + name = mode_option; +- namelen = strlen(name); +- for (i = namelen-1; i >= 0; i--) { +- switch (name[i]) { +- case '@': +- if (!refresh_specified && !bpp_specified && +- !yres_specified && !cvt && !rb && was_digit) { +- refresh = simple_strtol(&name[i+1], NULL, 10); +- refresh_specified = true; +- was_digit = false; +- } else +- goto done; +- break; +- case '-': +- if (!bpp_specified && !yres_specified && !cvt && +- !rb && was_digit) { +- bpp = simple_strtol(&name[i+1], NULL, 10); +- bpp_specified = true; +- was_digit = false; +- } else +- goto done; +- break; +- case 'x': +- if (!yres_specified && was_digit) { +- yres = simple_strtol(&name[i+1], NULL, 10); +- yres_specified = true; +- was_digit = false; +- } else +- goto done; +- break; +- case '0' ... '9': +- was_digit = true; +- break; +- case 'M': +- if (yres_specified || cvt || was_digit) +- goto done; +- cvt = true; +- break; +- case 'R': +- if (yres_specified || cvt || rb || was_digit) +- goto done; +- rb = true; +- break; +- case 'm': +- if (cvt || yres_specified || was_digit) +- goto done; +- margins = true; +- break; +- case 'i': +- if (cvt || yres_specified || was_digit) +- goto done; +- interlace = true; +- break; +- case 'e': +- if (yres_specified || bpp_specified || refresh_specified || +- was_digit || (force != DRM_FORCE_UNSPECIFIED)) +- goto done; + +- force = DRM_FORCE_ON; +- break; +- case 'D': +- if (yres_specified || bpp_specified || refresh_specified || +- was_digit || (force != DRM_FORCE_UNSPECIFIED)) +- goto done; ++ if (!isdigit(name[0])) ++ return false; + +- if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) && +- (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) +- force = DRM_FORCE_ON; +- else +- force = DRM_FORCE_ON_DIGITAL; +- break; +- case 'd': +- if (yres_specified || bpp_specified || refresh_specified || +- was_digit || (force != DRM_FORCE_UNSPECIFIED)) +- goto done; ++ /* Try to locate the bpp and refresh specifiers, if any */ ++ bpp_ptr = strchr(name, '-'); ++ if (bpp_ptr) { ++ bpp_off = bpp_ptr - name; ++ mode->bpp_specified = true; ++ } + +- force = DRM_FORCE_OFF; +- break; +- default: +- goto done; +- } ++ refresh_ptr = strchr(name, '@'); ++ if (refresh_ptr) { ++ refresh_off = refresh_ptr - name; ++ mode->refresh_specified = true; + } + +- if (i < 0 && yres_specified) { +- char *ch; +- xres = simple_strtol(name, &ch, 10); +- if ((ch != NULL) && (*ch == 'x')) +- res_specified = true; +- else +- i = ch - name; +- } else if (!yres_specified && was_digit) { +- /* catch mode that begins with digits but has no 'x' */ +- i = 0; +- } +-done: +- if (i >= 0) { +- pr_warn("[drm] parse error at position %i in video mode '%s'\n", +- i, name); +- mode->specified = false; +- return false; ++ /* Locate the end of the name / resolution, and parse it */ ++ if (bpp_ptr && refresh_ptr) { ++ mode_end = min(bpp_off, refresh_off); ++ } else if (bpp_ptr) { ++ mode_end = bpp_off; ++ } else if (refresh_ptr) { ++ mode_end = refresh_off; ++ } else { ++ mode_end = strlen(name); ++ parse_extras = true; + } + +- if (res_specified) { +- mode->specified = true; +- mode->xres = xres; +- mode->yres = yres; ++ ret = drm_mode_parse_cmdline_res_mode(name, mode_end, ++ parse_extras, ++ connector, ++ mode); ++ if (ret) ++ return false; ++ mode->specified = true; ++ ++ if (bpp_ptr) { ++ ret = drm_mode_parse_cmdline_bpp(bpp_ptr, &bpp_end_ptr, mode); ++ if (ret) ++ return false; + } + +- if (refresh_specified) { +- mode->refresh_specified = true; +- mode->refresh = refresh; ++ if (refresh_ptr) { ++ ret = drm_mode_parse_cmdline_refresh(refresh_ptr, ++ &refresh_end_ptr, mode); ++ if (ret) ++ return false; + } + +- if (bpp_specified) { +- mode->bpp_specified = true; +- mode->bpp = bpp; ++ /* ++ * Locate the end of the bpp / refresh, and parse the extras ++ * if relevant ++ */ ++ if (bpp_ptr && refresh_ptr) ++ extra_ptr = max(bpp_end_ptr, refresh_end_ptr); ++ else if (bpp_ptr) ++ extra_ptr = bpp_end_ptr; ++ else if (refresh_ptr) ++ extra_ptr = refresh_end_ptr; ++ ++ if (extra_ptr) { ++ int remaining = strlen(name) - (extra_ptr - name); ++ ++ /* ++ * We still have characters to process, while ++ * we shouldn't have any ++ */ ++ if (remaining > 0) ++ return false; + } +- mode->rb = rb; +- mode->cvt = cvt; +- mode->interlace = interlace; +- mode->margins = margins; +- mode->force = force; + + return true; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0669-w1-ds2413-output_write-cosmetic-fixes-simplify.patch b/target/linux/brcm2708/patches-4.19/950-0669-w1-ds2413-output_write-cosmetic-fixes-simplify.patch deleted file mode 100644 index f158d5def1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0669-w1-ds2413-output_write-cosmetic-fixes-simplify.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 3280ce5f5483a351f49e84b48ad98df87989346a Mon Sep 17 00:00:00 2001 -From: Mariusz Bialonczyk -Date: Mon, 20 May 2019 09:05:55 +0200 -Subject: [PATCH 669/806] w1: ds2413: output_write() cosmetic fixes / simplify - -commit ae2ee27aa985232f66421d7cd1c7f4b87c7dba7d upstream. - -Make the output_write simpler. -Based on Jean-Francois Dagenais code from: -49695ac46861 ("w1: ds2408: reset on output_write retry with readback") - -Signed-off-by: Mariusz Bialonczyk -Signed-off-by: Greg Kroah-Hartman ---- - drivers/w1/slaves/w1_ds2413.c | 19 +++++++++++-------- - 1 file changed, 11 insertions(+), 8 deletions(-) - ---- a/drivers/w1/slaves/w1_ds2413.c -+++ b/drivers/w1/slaves/w1_ds2413.c -@@ -69,6 +69,7 @@ static ssize_t output_write(struct file - struct w1_slave *sl = kobj_to_w1_slave(kobj); - u8 w1_buf[3]; - unsigned int retries = W1_F3A_RETRIES; -+ ssize_t bytes_written = -EIO; - - if (count != 1 || off != 0) - return -EFAULT; -@@ -78,7 +79,7 @@ static ssize_t output_write(struct file - dev_dbg(&sl->dev, "mutex locked"); - - if (w1_reset_select_slave(sl)) -- goto error; -+ goto out; - - /* according to the DS2413 datasheet the most significant 6 bits - should be set to "1"s, so do it now */ -@@ -91,18 +92,20 @@ static ssize_t output_write(struct file - w1_write_block(sl->master, w1_buf, 3); - - if (w1_read_8(sl->master) == W1_F3A_SUCCESS_CONFIRM_BYTE) { -- mutex_unlock(&sl->master->bus_mutex); -- dev_dbg(&sl->dev, "mutex unlocked, retries:%d", retries); -- return 1; -+ bytes_written = 1; -+ goto out; - } - if (w1_reset_resume_command(sl->master)) -- goto error; -+ goto out; /* unrecoverable error */ -+ -+ dev_warn(&sl->dev, "PIO_ACCESS_WRITE error, retries left: %d\n", retries); - } - --error: -+out: - mutex_unlock(&sl->master->bus_mutex); -- dev_dbg(&sl->dev, "mutex unlocked in error, retries:%d", retries); -- return -EIO; -+ dev_dbg(&sl->dev, "%s, mutex unlocked, retries: %d\n", -+ (bytes_written > 0) ? "succeeded" : "error", retries); -+ return bytes_written; - } - - static BIN_ATTR(output, S_IRUGO | S_IWUSR | S_IWGRP, NULL, output_write, 1); diff --git a/target/linux/brcm2708/patches-4.19/950-0670-drm-modes-Support-modes-names-on-the-command-line.patch b/target/linux/brcm2708/patches-4.19/950-0670-drm-modes-Support-modes-names-on-the-command-line.patch new file mode 100644 index 0000000000..aee684a955 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0670-drm-modes-Support-modes-names-on-the-command-line.patch @@ -0,0 +1,174 @@ +From 2cea4924c69b6be5cfe8d976810ccf76a3991230 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 19 Jun 2019 12:17:50 +0200 +Subject: [PATCH] drm/modes: Support modes names on the command line +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +commit 3aeeb13d899627fe2b86bdbdcd0927cf7192234f upstream. +Minor conflict resolution as upstream has moved functions +from drm_fb_helper.c to a new drm_client_modeset.c + +The drm subsystem also uses the video= kernel parameter, and in the +documentation refers to the fbdev documentation for that parameter. + +However, that documentation also says that instead of giving the mode using +its resolution we can also give a name. However, DRM doesn't handle that +case at the moment. Even though in most case it shouldn't make any +difference, it might be useful for analog modes, where different standards +might have the same resolution, but still have a few different parameters +that are not encoded in the modes (NTSC vs NTSC-J vs PAL-M for example). + +Reviewed-by: Noralf Trønnes +Signed-off-by: Maxime Ripard +Link: https://patchwork.freedesktop.org/patch/msgid/18443e0c3bdbbd16cea4ec63bc7f2079b820b43b.1560783090.git-series.maxime.ripard@bootlin.com +--- + drivers/gpu/drm/drm_connector.c | 3 +- + drivers/gpu/drm/drm_fb_helper.c | 4 +++ + drivers/gpu/drm/drm_modes.c | 62 ++++++++++++++++++++++++--------- + include/drm/drm_connector.h | 7 ++++ + 4 files changed, 59 insertions(+), 17 deletions(-) + +--- a/drivers/gpu/drm/drm_connector.c ++++ b/drivers/gpu/drm/drm_connector.c +@@ -135,8 +135,9 @@ static void drm_connector_get_cmdline_mo + connector->force = mode->force; + } + +- DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n", ++ DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n", + connector->name, ++ mode->name ? mode->name : "", + mode->xres, mode->yres, + mode->refresh_specified ? mode->refresh : 60, + mode->rb ? " reduced blanking" : "", +--- a/drivers/gpu/drm/drm_fb_helper.c ++++ b/drivers/gpu/drm/drm_fb_helper.c +@@ -2099,6 +2099,10 @@ struct drm_display_mode *drm_pick_cmdlin + prefer_non_interlace = !cmdline_mode->interlace; + again: + list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) { ++ /* Check (optional) mode name first */ ++ if (!strcmp(mode->name, cmdline_mode->name)) ++ return mode; ++ + /* check width/height */ + if (mode->hdisplay != cmdline_mode->xres || + mode->vdisplay != cmdline_mode->yres) +--- a/drivers/gpu/drm/drm_modes.c ++++ b/drivers/gpu/drm/drm_modes.c +@@ -1586,7 +1586,7 @@ bool drm_mode_parse_command_line_for_con + struct drm_cmdline_mode *mode) + { + const char *name; +- bool parse_extras = false; ++ bool named_mode = false, parse_extras = false; + unsigned int bpp_off = 0, refresh_off = 0; + unsigned int mode_end = 0; + char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL; +@@ -1605,8 +1605,22 @@ bool drm_mode_parse_command_line_for_con + + name = mode_option; + +- if (!isdigit(name[0])) +- return false; ++ /* ++ * This is a bit convoluted. To differentiate between the ++ * named modes and poorly formatted resolutions, we need a ++ * bunch of things: ++ * - We need to make sure that the first character (which ++ * would be our resolution in X) is a digit. ++ * - However, if the X resolution is missing, then we end up ++ * with something like x, with our first character ++ * being an alpha-numerical character, which would be ++ * considered a named mode. ++ * ++ * If this isn't enough, we should add more heuristics here, ++ * and matching unit-tests. ++ */ ++ if (!isdigit(name[0]) && name[0] != 'x') ++ named_mode = true; + + /* Try to locate the bpp and refresh specifiers, if any */ + bpp_ptr = strchr(name, '-'); +@@ -1617,6 +1631,9 @@ bool drm_mode_parse_command_line_for_con + + refresh_ptr = strchr(name, '@'); + if (refresh_ptr) { ++ if (named_mode) ++ return false; ++ + refresh_off = refresh_ptr - name; + mode->refresh_specified = true; + } +@@ -1633,12 +1650,16 @@ bool drm_mode_parse_command_line_for_con + parse_extras = true; + } + +- ret = drm_mode_parse_cmdline_res_mode(name, mode_end, +- parse_extras, +- connector, +- mode); +- if (ret) +- return false; ++ if (named_mode) { ++ strncpy(mode->name, name, mode_end); ++ } else { ++ ret = drm_mode_parse_cmdline_res_mode(name, mode_end, ++ parse_extras, ++ connector, ++ mode); ++ if (ret) ++ return false; ++ } + mode->specified = true; + + if (bpp_ptr) { +@@ -1666,14 +1687,23 @@ bool drm_mode_parse_command_line_for_con + extra_ptr = refresh_end_ptr; + + if (extra_ptr) { +- int remaining = strlen(name) - (extra_ptr - name); ++ if (!named_mode) { ++ int len = strlen(name) - (extra_ptr - name); + +- /* +- * We still have characters to process, while +- * we shouldn't have any +- */ +- if (remaining > 0) +- return false; ++ ret = drm_mode_parse_cmdline_extra(extra_ptr, len, ++ connector, mode); ++ if (ret) ++ return false; ++ } else { ++ int remaining = strlen(name) - (extra_ptr - name); ++ ++ /* ++ * We still have characters to process, while ++ * we shouldn't have any ++ */ ++ if (remaining > 0) ++ return false; ++ } + } + + return true; +--- a/include/drm/drm_connector.h ++++ b/include/drm/drm_connector.h +@@ -765,6 +765,13 @@ struct drm_connector_funcs { + */ + struct drm_cmdline_mode { + /** ++ * @name: ++ * ++ * Name of the mode. ++ */ ++ char name[DRM_DISPLAY_MODE_LEN]; ++ ++ /** + * @specified: + * + * Has a mode been read from the command-line? diff --git a/target/linux/brcm2708/patches-4.19/950-0670-w1-ds2413-add-retry-support-to-state_read.patch b/target/linux/brcm2708/patches-4.19/950-0670-w1-ds2413-add-retry-support-to-state_read.patch deleted file mode 100644 index 4e532df12d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0670-w1-ds2413-add-retry-support-to-state_read.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 91e443597cdd8f89d2b68ea5bf0f0823d1853ab7 Mon Sep 17 00:00:00 2001 -From: Mariusz Bialonczyk -Date: Mon, 20 May 2019 09:05:56 +0200 -Subject: [PATCH 670/806] w1: ds2413: add retry support to state_read() - -commit c50d09a86172073f55ebac0b92ad5a75907d64e7 upstream. - -The state_read() was calling PIO_ACCESS_READ once and bail out if it -failed for this first time. -This commit is improving this to trying more times before it give up, -similarly as the write call is currently doing. - -Signed-off-by: Mariusz Bialonczyk -Signed-off-by: Greg Kroah-Hartman ---- - drivers/w1/slaves/w1_ds2413.c | 37 +++++++++++++++++++++++------------ - 1 file changed, 24 insertions(+), 13 deletions(-) - ---- a/drivers/w1/slaves/w1_ds2413.c -+++ b/drivers/w1/slaves/w1_ds2413.c -@@ -30,6 +30,9 @@ static ssize_t state_read(struct file *f - size_t count) - { - struct w1_slave *sl = kobj_to_w1_slave(kobj); -+ unsigned int retries = W1_F3A_RETRIES; -+ ssize_t bytes_read = -EIO; -+ - dev_dbg(&sl->dev, - "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", - bin_attr->attr.name, kobj, (unsigned int)off, count, buf); -@@ -42,22 +45,30 @@ static ssize_t state_read(struct file *f - mutex_lock(&sl->master->bus_mutex); - dev_dbg(&sl->dev, "mutex locked"); - -- if (w1_reset_select_slave(sl)) { -- mutex_unlock(&sl->master->bus_mutex); -- return -EIO; -- } -+ if (w1_reset_select_slave(sl)) -+ goto out; - -- w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ); -- *buf = w1_read_8(sl->master); -+ while (retries--) { -+ w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ); - -- mutex_unlock(&sl->master->bus_mutex); -- dev_dbg(&sl->dev, "mutex unlocked"); -+ *buf = w1_read_8(sl->master); -+ /* check for correct complement */ -+ if ((*buf & 0x0F) == ((~*buf >> 4) & 0x0F)) { -+ bytes_read = 1; -+ goto out; -+ } -+ -+ if (w1_reset_resume_command(sl->master)) -+ goto out; /* unrecoverable error */ - -- /* check for correct complement */ -- if ((*buf & 0x0F) != ((~*buf >> 4) & 0x0F)) -- return -EIO; -- else -- return 1; -+ dev_warn(&sl->dev, "PIO_ACCESS_READ error, retries left: %d\n", retries); -+ } -+ -+out: -+ mutex_unlock(&sl->master->bus_mutex); -+ dev_dbg(&sl->dev, "%s, mutex unlocked, retries: %d\n", -+ (bytes_read > 0) ? "succeeded" : "error", retries); -+ return bytes_read; - } - - static BIN_ATTR_RO(state, 1); diff --git a/target/linux/brcm2708/patches-4.19/950-0671-drm-modes-Allow-to-specify-rotation-and-reflection-o.patch b/target/linux/brcm2708/patches-4.19/950-0671-drm-modes-Allow-to-specify-rotation-and-reflection-o.patch new file mode 100644 index 0000000000..f9ba856c44 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0671-drm-modes-Allow-to-specify-rotation-and-reflection-o.patch @@ -0,0 +1,277 @@ +From 5a8ccd79b6bad32e52620a94199bf1af2e19708e Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 19 Jun 2019 12:17:51 +0200 +Subject: [PATCH] drm/modes: Allow to specify rotation and reflection + on the commandline +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Commit 1bf4e09227c345e246062285eba4b8fe660e512e upstream. +Minor conflict resolution as upstream has moved functions +from drm_fb_helper.c to a new drm_client_modeset.c + +Rotations and reflections setup are needed in some scenarios to initialise +properly the initial framebuffer. Some drivers already had a bunch of +quirks to deal with this, such as either a private kernel command line +parameter (omapdss) or on the device tree (various panels). + +In order to accomodate this, let's create a video mode parameter to deal +with the rotation and reflexion. + +Reviewed-by: Noralf Trønnes +Signed-off-by: Maxime Ripard +Link: https://patchwork.freedesktop.org/patch/msgid/777da16e42db757c1f5b414b5ca34507097fed5c.1560783090.git-series.maxime.ripard@bootlin.com +--- + Documentation/fb/modedb.txt | 12 ++++ + drivers/gpu/drm/drm_fb_helper.c | 30 +++++++++ + drivers/gpu/drm/drm_modes.c | 114 ++++++++++++++++++++++++++------ + include/drm/drm_connector.h | 10 +++ + 4 files changed, 146 insertions(+), 20 deletions(-) + +--- a/Documentation/fb/modedb.txt ++++ b/Documentation/fb/modedb.txt +@@ -51,6 +51,18 @@ To force the VGA output to be enabled an + Specifying the option multiple times for different ports is possible, e.g.: + video=LVDS-1:d video=HDMI-1:D + ++Options can also be passed after the mode, using commas as separator. ++ ++ Sample usage: 720x480,rotate=180 - 720x480 mode, rotated by 180 degrees ++ ++Valid options are: ++ ++ - reflect_x (boolean): Perform an axial symmetry on the X axis ++ - reflect_y (boolean): Perform an axial symmetry on the Y axis ++ - rotate (integer): Rotate the initial framebuffer by x ++ degrees. Valid values are 0, 90, 180 and 270. ++ ++ + ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** + + What is the VESA(TM) Coordinated Video Timings (CVT)? +--- a/drivers/gpu/drm/drm_fb_helper.c ++++ b/drivers/gpu/drm/drm_fb_helper.c +@@ -2464,6 +2464,7 @@ static void drm_setup_crtc_rotation(stru + struct drm_connector *connector) + { + struct drm_plane *plane = fb_crtc->mode_set.crtc->primary; ++ struct drm_cmdline_mode *cmdline; + uint64_t valid_mask = 0; + int i, rotation; + +@@ -2483,6 +2484,35 @@ static void drm_setup_crtc_rotation(stru + rotation = DRM_MODE_ROTATE_0; + } + ++ /** ++ * The panel already defined the default rotation ++ * through its orientation. Whatever has been provided ++ * on the command line needs to be added to that. ++ * ++ * Unfortunately, the rotations are at different bit ++ * indices, so the math to add them up are not as ++ * trivial as they could. ++ * ++ * Reflections on the other hand are pretty trivial to deal with, a ++ * simple XOR between the two handle the addition nicely. ++ */ ++ cmdline = &connector->cmdline_mode; ++ if (cmdline->specified) { ++ unsigned int cmdline_rest, panel_rest; ++ unsigned int cmdline_rot, panel_rot; ++ unsigned int sum_rot, sum_rest; ++ ++ panel_rot = ilog2(rotation & DRM_MODE_ROTATE_MASK); ++ cmdline_rot = ilog2(cmdline->rotation_reflection & DRM_MODE_ROTATE_MASK); ++ sum_rot = (panel_rot + cmdline_rot) % 4; ++ ++ panel_rest = rotation & ~DRM_MODE_ROTATE_MASK; ++ cmdline_rest = cmdline->rotation_reflection & ~DRM_MODE_ROTATE_MASK; ++ sum_rest = panel_rest ^ cmdline_rest; ++ ++ rotation = (1 << sum_rot) | sum_rest; ++ } ++ + /* + * TODO: support 90 / 270 degree hardware rotation, + * depending on the hardware this may require the framebuffer +--- a/drivers/gpu/drm/drm_modes.c ++++ b/drivers/gpu/drm/drm_modes.c +@@ -1560,6 +1560,71 @@ static int drm_mode_parse_cmdline_res_mo + return 0; + } + ++static int drm_mode_parse_cmdline_options(char *str, size_t len, ++ struct drm_connector *connector, ++ struct drm_cmdline_mode *mode) ++{ ++ unsigned int rotation = 0; ++ char *sep = str; ++ ++ while ((sep = strchr(sep, ','))) { ++ char *delim, *option; ++ ++ option = sep + 1; ++ delim = strchr(option, '='); ++ if (!delim) { ++ delim = strchr(option, ','); ++ ++ if (!delim) ++ delim = str + len; ++ } ++ ++ if (!strncmp(option, "rotate", delim - option)) { ++ const char *value = delim + 1; ++ unsigned int deg; ++ ++ deg = simple_strtol(value, &sep, 10); ++ ++ /* Make sure we have parsed something */ ++ if (sep == value) ++ return -EINVAL; ++ ++ switch (deg) { ++ case 0: ++ rotation |= DRM_MODE_ROTATE_0; ++ break; ++ ++ case 90: ++ rotation |= DRM_MODE_ROTATE_90; ++ break; ++ ++ case 180: ++ rotation |= DRM_MODE_ROTATE_180; ++ break; ++ ++ case 270: ++ rotation |= DRM_MODE_ROTATE_270; ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ } else if (!strncmp(option, "reflect_x", delim - option)) { ++ rotation |= DRM_MODE_REFLECT_X; ++ sep = delim; ++ } else if (!strncmp(option, "reflect_y", delim - option)) { ++ rotation |= DRM_MODE_REFLECT_Y; ++ sep = delim; ++ } else { ++ return -EINVAL; ++ } ++ } ++ ++ mode->rotation_reflection = rotation; ++ ++ return 0; ++} ++ + /** + * drm_mode_parse_command_line_for_connector - parse command line modeline for connector + * @mode_option: optional per connector mode option +@@ -1575,6 +1640,10 @@ static int drm_mode_parse_cmdline_res_mo + * + * x[M][R][-][@][i][m][eDd] + * ++ * Additionals options can be provided following the mode, using a comma to ++ * separate each option. Valid options can be found in ++ * Documentation/fb/modedb.txt. ++ * + * The intermediate drm_cmdline_mode structure is required to store additional + * options from the command line modline like the force-enable/disable flag. + * +@@ -1587,9 +1656,10 @@ bool drm_mode_parse_command_line_for_con + { + const char *name; + bool named_mode = false, parse_extras = false; +- unsigned int bpp_off = 0, refresh_off = 0; ++ unsigned int bpp_off = 0, refresh_off = 0, options_off = 0; + unsigned int mode_end = 0; + char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL; ++ char *options_ptr = NULL; + char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL; + int ret; + +@@ -1638,13 +1708,18 @@ bool drm_mode_parse_command_line_for_con + mode->refresh_specified = true; + } + ++ /* Locate the start of named options */ ++ options_ptr = strchr(name, ','); ++ if (options_ptr) ++ options_off = options_ptr - name; ++ + /* Locate the end of the name / resolution, and parse it */ +- if (bpp_ptr && refresh_ptr) { +- mode_end = min(bpp_off, refresh_off); +- } else if (bpp_ptr) { ++ if (bpp_ptr) { + mode_end = bpp_off; + } else if (refresh_ptr) { + mode_end = refresh_off; ++ } else if (options_ptr) { ++ mode_end = options_off; + } else { + mode_end = strlen(name); + parse_extras = true; +@@ -1686,24 +1761,23 @@ bool drm_mode_parse_command_line_for_con + else if (refresh_ptr) + extra_ptr = refresh_end_ptr; + +- if (extra_ptr) { +- if (!named_mode) { +- int len = strlen(name) - (extra_ptr - name); +- +- ret = drm_mode_parse_cmdline_extra(extra_ptr, len, +- connector, mode); +- if (ret) +- return false; +- } else { +- int remaining = strlen(name) - (extra_ptr - name); ++ if (extra_ptr && ++ extra_ptr != options_ptr) { ++ int len = strlen(name) - (extra_ptr - name); + +- /* +- * We still have characters to process, while +- * we shouldn't have any +- */ +- if (remaining > 0) +- return false; +- } ++ ret = drm_mode_parse_cmdline_extra(extra_ptr, len, ++ connector, mode); ++ if (ret) ++ return false; ++ } ++ ++ if (options_ptr) { ++ int len = strlen(name) - (options_ptr - name); ++ ++ ret = drm_mode_parse_cmdline_options(options_ptr, len, ++ connector, mode); ++ if (ret) ++ return false; + } + + return true; +--- a/include/drm/drm_connector.h ++++ b/include/drm/drm_connector.h +@@ -857,6 +857,16 @@ struct drm_cmdline_mode { + * state to one of the DRM_FORCE_* values. + */ + enum drm_connector_force force; ++ ++ /** ++ * @rotation_reflection: ++ * ++ * Initial rotation and reflection of the mode setup from the ++ * command line. See DRM_MODE_ROTATE_* and ++ * DRM_MODE_REFLECT_*. The only rotations supported are ++ * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180. ++ */ ++ unsigned int rotation_reflection; + }; + + /** diff --git a/target/linux/brcm2708/patches-4.19/950-0671-w1-ds2413-when-the-slave-is-not-responding-during-re.patch b/target/linux/brcm2708/patches-4.19/950-0671-w1-ds2413-when-the-slave-is-not-responding-during-re.patch deleted file mode 100644 index 43d4a5e859..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0671-w1-ds2413-when-the-slave-is-not-responding-during-re.patch +++ /dev/null @@ -1,56 +0,0 @@ -From c84676e57896fedb47a69739fb82bb9941f624c4 Mon Sep 17 00:00:00 2001 -From: Mariusz Bialonczyk -Date: Wed, 22 May 2019 12:40:53 +0200 -Subject: [PATCH 671/806] w1: ds2413: when the slave is not responding during - read, select it again - -commit 3856032a0628e6b94badb9131a706dda185e071d upstream. - -The protocol is not allowing to obtain a byte of 0xff for PIO_ACCESS_READ -call. It is very likely that the slave was not addressed properly and -it is just not respoding (leaving the bus in logic high state) during -the read of sampled PIO value. -We cannot just call w1_reset_resume_command() because the problem will -persist, instead try selecting (addressing) the slave again. - -Signed-off-by: Mariusz Bialonczyk -Signed-off-by: Greg Kroah-Hartman ---- - drivers/w1/slaves/w1_ds2413.c | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - ---- a/drivers/w1/slaves/w1_ds2413.c -+++ b/drivers/w1/slaves/w1_ds2413.c -@@ -24,6 +24,7 @@ - #define W1_F3A_FUNC_PIO_ACCESS_READ 0xF5 - #define W1_F3A_FUNC_PIO_ACCESS_WRITE 0x5A - #define W1_F3A_SUCCESS_CONFIRM_BYTE 0xAA -+#define W1_F3A_INVALID_PIO_STATE 0xFF - - static ssize_t state_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, char *buf, loff_t off, -@@ -45,6 +46,7 @@ static ssize_t state_read(struct file *f - mutex_lock(&sl->master->bus_mutex); - dev_dbg(&sl->dev, "mutex locked"); - -+next: - if (w1_reset_select_slave(sl)) - goto out; - -@@ -52,10 +54,15 @@ static ssize_t state_read(struct file *f - w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ); - - *buf = w1_read_8(sl->master); -- /* check for correct complement */ - if ((*buf & 0x0F) == ((~*buf >> 4) & 0x0F)) { -+ /* complement is correct */ - bytes_read = 1; - goto out; -+ } else if (*buf == W1_F3A_INVALID_PIO_STATE) { -+ /* slave didn't respond, try to select it again */ -+ dev_warn(&sl->dev, "slave device did not respond to PIO_ACCESS_READ, " \ -+ "reselecting, retries left: %d\n", retries); -+ goto next; - } - - if (w1_reset_resume_command(sl->master)) diff --git a/target/linux/brcm2708/patches-4.19/950-0672-drm-connector-Introduce-a-TV-margins-structure.patch b/target/linux/brcm2708/patches-4.19/950-0672-drm-connector-Introduce-a-TV-margins-structure.patch new file mode 100644 index 0000000000..7c6f415402 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0672-drm-connector-Introduce-a-TV-margins-structure.patch @@ -0,0 +1,81 @@ +From 6261047a83258900e57a0a699ec7954360c6e7f3 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 19 Jun 2019 12:17:51 +0200 +Subject: [PATCH] drm/connector: Introduce a TV margins structure +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Commit 22045e8e52bd802f743f0471242782fc3b479707 upstream. + +The TV margins has been defined as a structure inside the +drm_connector_state structure so far. However, we will need it in other +structures as well, so let's move that structure definition so that it can +be reused. + +Reviewed-by: Noralf Trønnes +Signed-off-by: Maxime Ripard +Link: https://patchwork.freedesktop.org/patch/msgid/38b773b03f15ec7a135cdf8f7db669e5ada20cf2.1560783090.git-series.maxime.ripard@bootlin.com +--- + include/drm/drm_connector.h | 41 +++++++++++++++++++++++++++---------- + 1 file changed, 30 insertions(+), 11 deletions(-) + +--- a/include/drm/drm_connector.h ++++ b/include/drm/drm_connector.h +@@ -344,13 +344,37 @@ int drm_display_info_set_bus_formats(str + unsigned int num_formats); + + /** ++ * struct drm_connector_tv_margins - TV connector related margins ++ * ++ * Describes the margins in pixels to put around the image on TV ++ * connectors to deal with overscan. ++ */ ++struct drm_connector_tv_margins { ++ /** ++ * @bottom: Bottom margin in pixels. ++ */ ++ unsigned int bottom; ++ ++ /** ++ * @left: Left margin in pixels. ++ */ ++ unsigned int left; ++ ++ /** ++ * @right: Right margin in pixels. ++ */ ++ unsigned int right; ++ ++ /** ++ * @top: Top margin in pixels. ++ */ ++ unsigned int top; ++}; ++ ++/** + * struct drm_tv_connector_state - TV connector related states + * @subconnector: selected subconnector +- * @margins: margins (all margins are expressed in pixels) +- * @margins.left: left margin +- * @margins.right: right margin +- * @margins.top: top margin +- * @margins.bottom: bottom margin ++ * @margins: TV margins + * @mode: TV mode + * @brightness: brightness in percent + * @contrast: contrast in percent +@@ -361,12 +385,7 @@ int drm_display_info_set_bus_formats(str + */ + struct drm_tv_connector_state { + enum drm_mode_subconnector subconnector; +- struct { +- unsigned int left; +- unsigned int right; +- unsigned int top; +- unsigned int bottom; +- } margins; ++ struct drm_connector_tv_margins margins; + unsigned int mode; + unsigned int brightness; + unsigned int contrast; diff --git a/target/linux/brcm2708/patches-4.19/950-0672-w1-ds2413-fix-state-byte-comparision.patch b/target/linux/brcm2708/patches-4.19/950-0672-w1-ds2413-fix-state-byte-comparision.patch deleted file mode 100644 index dc99ef9ea6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0672-w1-ds2413-fix-state-byte-comparision.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 38ca046063ee6fcef66c9c3bec5844a65f9d48d9 Mon Sep 17 00:00:00 2001 -From: Mariusz Bialonczyk -Date: Thu, 30 May 2019 09:51:25 +0200 -Subject: [PATCH 672/806] w1: ds2413: fix state byte comparision - -commit aacd152ecd7b18af5d2d96dea9e7284c1c93abea upstream. - -This commit is fixing a smatch warning: -drivers/w1/slaves/w1_ds2413.c:61 state_read() warn: impossible condition '(*buf == 255) => ((-128)-127 == 255)' -by creating additional u8 variable for the bus reading and comparision - -Reported-by: kbuild test robot -Reported-by: Dan Carpenter -Cc: Dan Carpenter -Fixes: 3856032a0628 ("w1: ds2413: when the slave is not responding during read, select it again") -Signed-off-by: Mariusz Bialonczyk -Signed-off-by: Greg Kroah-Hartman ---- - drivers/w1/slaves/w1_ds2413.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - ---- a/drivers/w1/slaves/w1_ds2413.c -+++ b/drivers/w1/slaves/w1_ds2413.c -@@ -33,6 +33,7 @@ static ssize_t state_read(struct file *f - struct w1_slave *sl = kobj_to_w1_slave(kobj); - unsigned int retries = W1_F3A_RETRIES; - ssize_t bytes_read = -EIO; -+ u8 state; - - dev_dbg(&sl->dev, - "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", -@@ -53,12 +54,13 @@ next: - while (retries--) { - w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ); - -- *buf = w1_read_8(sl->master); -- if ((*buf & 0x0F) == ((~*buf >> 4) & 0x0F)) { -+ state = w1_read_8(sl->master); -+ if ((state & 0x0F) == ((~state >> 4) & 0x0F)) { - /* complement is correct */ -+ *buf = state; - bytes_read = 1; - goto out; -- } else if (*buf == W1_F3A_INVALID_PIO_STATE) { -+ } else if (state == W1_F3A_INVALID_PIO_STATE) { - /* slave didn't respond, try to select it again */ - dev_warn(&sl->dev, "slave device did not respond to PIO_ACCESS_READ, " \ - "reselecting, retries left: %d\n", retries); diff --git a/target/linux/brcm2708/patches-4.19/950-0673-drm-modes-Parse-overscan-properties.patch b/target/linux/brcm2708/patches-4.19/950-0673-drm-modes-Parse-overscan-properties.patch new file mode 100644 index 0000000000..f8de9b5fc3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0673-drm-modes-Parse-overscan-properties.patch @@ -0,0 +1,102 @@ +From 99b367ee521e48beae92bea59515dd0f08f2e55b Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 19 Jun 2019 12:17:51 +0200 +Subject: [PATCH] drm/modes: Parse overscan properties +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Commit 3d46a3007cd8f73bae502bf5c171977b91d7aacc upstream. + +Properly configuring the overscan properties might be needed for the +initial setup of the framebuffer for display that still have overscan. +Let's allow for more properties on the kernel command line to setup each +margin. + +Reviewed-by: Noralf Trønnes +Signed-off-by: Maxime Ripard +Link: https://patchwork.freedesktop.org/patch/msgid/e481f1628e3768ca49226ec2115cfa4dfcbd5e4c.1560783090.git-series.maxime.ripard@bootlin.com +--- + Documentation/fb/modedb.txt | 2 ++ + drivers/gpu/drm/drm_modes.c | 44 +++++++++++++++++++++++++++++++++++++ + include/drm/drm_connector.h | 5 +++++ + 3 files changed, 51 insertions(+) + +--- a/Documentation/fb/modedb.txt ++++ b/Documentation/fb/modedb.txt +@@ -57,6 +57,8 @@ Options can also be passed after the mod + + Valid options are: + ++ - margin_top, margin_bottom, margin_left, margin_right (integer): ++ Number of pixels in the margins, typically to deal with overscan on TVs + - reflect_x (boolean): Perform an axial symmetry on the X axis + - reflect_y (boolean): Perform an axial symmetry on the Y axis + - rotate (integer): Rotate the initial framebuffer by x +--- a/drivers/gpu/drm/drm_modes.c ++++ b/drivers/gpu/drm/drm_modes.c +@@ -1615,6 +1615,50 @@ static int drm_mode_parse_cmdline_option + } else if (!strncmp(option, "reflect_y", delim - option)) { + rotation |= DRM_MODE_REFLECT_Y; + sep = delim; ++ } else if (!strncmp(option, "margin_right", delim - option)) { ++ const char *value = delim + 1; ++ unsigned int margin; ++ ++ margin = simple_strtol(value, &sep, 10); ++ ++ /* Make sure we have parsed something */ ++ if (sep == value) ++ return -EINVAL; ++ ++ mode->tv_margins.right = margin; ++ } else if (!strncmp(option, "margin_left", delim - option)) { ++ const char *value = delim + 1; ++ unsigned int margin; ++ ++ margin = simple_strtol(value, &sep, 10); ++ ++ /* Make sure we have parsed something */ ++ if (sep == value) ++ return -EINVAL; ++ ++ mode->tv_margins.left = margin; ++ } else if (!strncmp(option, "margin_top", delim - option)) { ++ const char *value = delim + 1; ++ unsigned int margin; ++ ++ margin = simple_strtol(value, &sep, 10); ++ ++ /* Make sure we have parsed something */ ++ if (sep == value) ++ return -EINVAL; ++ ++ mode->tv_margins.top = margin; ++ } else if (!strncmp(option, "margin_bottom", delim - option)) { ++ const char *value = delim + 1; ++ unsigned int margin; ++ ++ margin = simple_strtol(value, &sep, 10); ++ ++ /* Make sure we have parsed something */ ++ if (sep == value) ++ return -EINVAL; ++ ++ mode->tv_margins.bottom = margin; + } else { + return -EINVAL; + } +--- a/include/drm/drm_connector.h ++++ b/include/drm/drm_connector.h +@@ -886,6 +886,11 @@ struct drm_cmdline_mode { + * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180. + */ + unsigned int rotation_reflection; ++ ++ /** ++ * @tv_margins: TV margins to apply to the mode. ++ */ ++ struct drm_connector_tv_margins tv_margins; + }; + + /** diff --git a/target/linux/brcm2708/patches-4.19/950-0673-drm-vc4_dsi-Fix-DMA-channel-and-memory-leak-in-vc4-3.patch b/target/linux/brcm2708/patches-4.19/950-0673-drm-vc4_dsi-Fix-DMA-channel-and-memory-leak-in-vc4-3.patch deleted file mode 100644 index 6414ceb062..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0673-drm-vc4_dsi-Fix-DMA-channel-and-memory-leak-in-vc4-3.patch +++ /dev/null @@ -1,135 +0,0 @@ -From 496b26b154da9a962a5310641d8f4b73200fe590 Mon Sep 17 00:00:00 2001 -From: Chris Miller -Date: Wed, 26 Jun 2019 10:40:30 +0100 -Subject: [PATCH 673/806] drm: vc4_dsi: Fix DMA channel and memory leak in vc4 - (#3012) - -Signed-off-by: Chris G Miller ---- - drivers/gpu/drm/vc4/vc4_dsi.c | 35 ++++++++++++++++++++++++----------- - 1 file changed, 24 insertions(+), 11 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_dsi.c -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -1536,9 +1536,11 @@ static int vc4_dsi_bind(struct device *d - /* DSI1 has a broken AXI slave that doesn't respond to writes - * from the ARM. It does handle writes from the DMA engine, - * so set up a channel for talking to it. -+ * Where possible managed resource providers are used, but the DMA channel -+ * must - if acquired - be explicitly released prior to taking an error exit path. - */ - if (dsi->port == 1) { -- dsi->reg_dma_mem = dma_alloc_coherent(dev, 4, -+ dsi->reg_dma_mem = dmam_alloc_coherent(dev, 4, - &dsi->reg_dma_paddr, - GFP_KERNEL); - if (!dsi->reg_dma_mem) { -@@ -1557,6 +1559,8 @@ static int vc4_dsi_bind(struct device *d - return ret; - } - -+ /* From here on, any error exits must release the dma channel */ -+ - /* Get the physical address of the device's registers. The - * struct resource for the regs gives us the bus address - * instead. -@@ -1583,7 +1587,7 @@ static int vc4_dsi_bind(struct device *d - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get interrupt: %d\n", ret); -- return ret; -+ goto rel_dma_exit; - } - - dsi->escape_clock = devm_clk_get(dev, "escape"); -@@ -1591,7 +1595,7 @@ static int vc4_dsi_bind(struct device *d - ret = PTR_ERR(dsi->escape_clock); - if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get escape clock: %d\n", ret); -- return ret; -+ goto rel_dma_exit; - } - - dsi->pll_phy_clock = devm_clk_get(dev, "phy"); -@@ -1599,7 +1603,7 @@ static int vc4_dsi_bind(struct device *d - ret = PTR_ERR(dsi->pll_phy_clock); - if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get phy clock: %d\n", ret); -- return ret; -+ goto rel_dma_exit; - } - - dsi->pixel_clock = devm_clk_get(dev, "pixel"); -@@ -1607,7 +1611,7 @@ static int vc4_dsi_bind(struct device *d - ret = PTR_ERR(dsi->pixel_clock); - if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get pixel clock: %d\n", ret); -- return ret; -+ goto rel_dma_exit; - } - - ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, -@@ -1622,26 +1626,28 @@ static int vc4_dsi_bind(struct device *d - if (ret == -ENODEV) - return 0; - -- return ret; -+ goto rel_dma_exit; - } - - if (panel) { - dsi->bridge = devm_drm_panel_bridge_add(dev, panel, - DRM_MODE_CONNECTOR_DSI); -- if (IS_ERR(dsi->bridge)) -- return PTR_ERR(dsi->bridge); -+ if (IS_ERR(dsi->bridge)){ -+ ret = PTR_ERR(dsi->bridge); -+ goto rel_dma_exit; -+ } - } - - /* The esc clock rate is supposed to always be 100Mhz. */ - ret = clk_set_rate(dsi->escape_clock, 100 * 1000000); - if (ret) { - dev_err(dev, "Failed to set esc clock: %d\n", ret); -- return ret; -+ goto rel_dma_exit; - } - - ret = vc4_dsi_init_phy_clocks(dsi); - if (ret) -- return ret; -+ goto rel_dma_exit; - - if (dsi->port == 1) - vc4->dsi1 = dsi; -@@ -1653,7 +1659,7 @@ static int vc4_dsi_bind(struct device *d - ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL); - if (ret) { - dev_err(dev, "bridge attach failed: %d\n", ret); -- return ret; -+ goto rel_dma_exit; - } - /* Disable the atomic helper calls into the bridge. We - * manually call the bridge pre_enable / enable / etc. calls -@@ -1665,6 +1671,11 @@ static int vc4_dsi_bind(struct device *d - pm_runtime_enable(dev); - - return 0; -+ -+rel_dma_exit: -+ dma_release_channel(dsi->reg_dma_chan); -+ -+ return ret; - } - - static void vc4_dsi_unbind(struct device *dev, struct device *master, -@@ -1679,6 +1690,8 @@ static void vc4_dsi_unbind(struct device - - vc4_dsi_encoder_destroy(dsi->encoder); - -+ dma_release_channel(dsi->reg_dma_chan); -+ - if (dsi->port == 1) - vc4->dsi1 = NULL; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0674-drm-atomic-Add-a-function-to-reset-connector-TV-prop.patch b/target/linux/brcm2708/patches-4.19/950-0674-drm-atomic-Add-a-function-to-reset-connector-TV-prop.patch new file mode 100644 index 0000000000..9f509437d8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0674-drm-atomic-Add-a-function-to-reset-connector-TV-prop.patch @@ -0,0 +1,63 @@ +From 8dd1e4d73fdbc4a533a58c2c74a72877257c558c Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 19 Jun 2019 12:17:52 +0200 +Subject: [PATCH] drm/atomic: Add a function to reset connector TV + properties +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Commit 731514b446fe6748d5a55a3dff202efb45c7d8df upstream. +Reworked as functions have been moved from drm_atomic_helper.[c|h] +to drm_atomic_state_helper.[c|h]. + +During the connector reset, if that connector has a TV property, it needs +to be reset to the value provided on the command line. + +Provide a helper to do that. + +Reviewed-by: Noralf Trønnes +Signed-off-by: Maxime Ripard +Link: https://patchwork.freedesktop.org/patch/msgid/84a7b657f09303a2850e1cc79e68f623547f3fdd.1560783090.git-series.maxime.ripard@bootlin.com +--- + drivers/gpu/drm/drm_atomic_helper.c | 18 ++++++++++++++++++ + include/drm/drm_atomic_helper.h | 1 + + 2 files changed, 19 insertions(+) + +--- a/drivers/gpu/drm/drm_atomic_helper.c ++++ b/drivers/gpu/drm/drm_atomic_helper.c +@@ -3737,6 +3737,24 @@ void drm_atomic_helper_connector_reset(s + EXPORT_SYMBOL(drm_atomic_helper_connector_reset); + + /** ++ * drm_atomic_helper_connector_tv_reset - Resets TV connector properties ++ * @connector: DRM connector ++ * ++ * Resets the TV-related properties attached to a connector. ++ */ ++void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector) ++{ ++ struct drm_cmdline_mode *cmdline = &connector->cmdline_mode; ++ struct drm_connector_state *state = connector->state; ++ ++ state->tv.margins.left = cmdline->tv_margins.left; ++ state->tv.margins.right = cmdline->tv_margins.right; ++ state->tv.margins.top = cmdline->tv_margins.top; ++ state->tv.margins.bottom = cmdline->tv_margins.bottom; ++} ++EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset); ++ ++/** + * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state + * @connector: connector object + * @state: atomic connector state +--- a/include/drm/drm_atomic_helper.h ++++ b/include/drm/drm_atomic_helper.h +@@ -168,6 +168,7 @@ void drm_atomic_helper_plane_destroy_sta + void __drm_atomic_helper_connector_reset(struct drm_connector *connector, + struct drm_connector_state *conn_state); + void drm_atomic_helper_connector_reset(struct drm_connector *connector); ++void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector); + void + __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector, + struct drm_connector_state *state); diff --git a/target/linux/brcm2708/patches-4.19/950-0674-video-bcm2708_fb-Revert-cma-allocation-attempt.patch b/target/linux/brcm2708/patches-4.19/950-0674-video-bcm2708_fb-Revert-cma-allocation-attempt.patch deleted file mode 100644 index dd2c150d01..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0674-video-bcm2708_fb-Revert-cma-allocation-attempt.patch +++ /dev/null @@ -1,159 +0,0 @@ -From b3fe618a47d770f6c9808ade14360fd81a599789 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 19 Jun 2019 03:55:50 +0100 -Subject: [PATCH 674/806] video/bcm2708_fb: Revert cma allocation attempt - -"4600e91 Pulled in the multi frame buffer support from the Pi3 repo" -pulled back in the code for allocating the framebuffer from the CMA -heap. -Revert it again. - -Signed-off-by: Dave Stevenson ---- - drivers/video/fbdev/bcm2708_fb.c | 101 +++------------------ - include/soc/bcm2835/raspberrypi-firmware.h | 1 - - 2 files changed, 13 insertions(+), 89 deletions(-) - ---- a/drivers/video/fbdev/bcm2708_fb.c -+++ b/drivers/video/fbdev/bcm2708_fb.c -@@ -112,9 +112,6 @@ struct bcm2708_fb { - struct vc4_display_settings_t display_settings; - struct debugfs_regset32 screeninfo_regset; - struct bcm2708_fb_dev *fbdev; -- unsigned int image_size; -- dma_addr_t dma_addr; -- void *cpuaddr; - }; - - #define MAX_FRAMEBUFFERS 3 -@@ -377,12 +374,12 @@ static int bcm2708_fb_set_par(struct fb_ - .xoffset = info->var.xoffset, - .yoffset = info->var.yoffset, - .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, -- /* base and screen_size will be initialised later */ -- .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH, 4, 0 }, -- /* pitch will be initialised later */ -+ .base = 0, -+ .screen_size = 0, -+ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, -+ .pitch = 0, - }; -- int ret, image_size; -- -+ int ret; - - print_debug("%s(%p) %dx%d (%dx%d), %d, %d (display %d)\n", __func__, - info, -@@ -397,76 +394,12 @@ static int bcm2708_fb_set_par(struct fb_ - */ - set_display_num(fb); - -- /* Try allocating our own buffer. We can specify all the parameters */ -- image_size = ((info->var.xres * info->var.yres) * -- info->var.bits_per_pixel) >> 3; -- -- if (!fb->fbdev->disable_arm_alloc && -- (image_size != fb->image_size || !fb->dma_addr)) { -- if (fb->dma_addr) { -- dma_free_coherent(info->device, fb->image_size, -- fb->cpuaddr, fb->dma_addr); -- fb->image_size = 0; -- fb->cpuaddr = NULL; -- fb->dma_addr = 0; -- } -- -- fb->cpuaddr = dma_alloc_coherent(info->device, image_size, -- &fb->dma_addr, GFP_KERNEL); -- -- if (!fb->cpuaddr) { -- fb->dma_addr = 0; -- fb->fbdev->disable_arm_alloc = true; -- } else { -- fb->image_size = image_size; -- } -- } -- -- if (fb->cpuaddr) { -- fbinfo.base = fb->dma_addr; -- fbinfo.screen_size = image_size; -- fbinfo.pitch = (info->var.xres * info->var.bits_per_pixel) >> 3; -- -- ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, -- sizeof(fbinfo)); -- if (ret || fbinfo.base != fb->dma_addr) { -- /* Firmware either failed, or assigned a different base -- * address (ie it doesn't support being passed an FB -- * allocation). -- * Destroy the allocation, and don't try again. -- */ -- dma_free_coherent(info->device, fb->image_size, -- fb->cpuaddr, fb->dma_addr); -- fb->image_size = 0; -- fb->cpuaddr = NULL; -- fb->dma_addr = 0; -- fb->fbdev->disable_arm_alloc = true; -- } -- } else { -- /* Our allocation failed - drop into the old scheme of -- * allocation by the VPU. -- */ -- ret = -ENOMEM; -- } -- -+ ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, -+ sizeof(fbinfo)); - if (ret) { -- /* Old scheme: -- * - FRAMEBUFFER_ALLOCATE passes 0 for base and screen_size. -- * - GET_PITCH instead of SET_PITCH. -- */ -- fbinfo.base = 0; -- fbinfo.screen_size = 0; -- fbinfo.tag6.tag = RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH; -- fbinfo.pitch = 0; -- -- ret = rpi_firmware_property_list(fb->fbdev->fw, &fbinfo, -- sizeof(fbinfo)); -- if (ret) { -- dev_err(info->device, -- "Failed to allocate GPU framebuffer (%d)\n", -- ret); -- return ret; -- } -+ dev_err(info->device, -+ "Failed to allocate GPU framebuffer (%d)\n", ret); -+ return ret; - } - - if (info->var.bits_per_pixel <= 8) -@@ -481,17 +414,9 @@ static int bcm2708_fb_set_par(struct fb_ - fb->fb.fix.smem_start = fbinfo.base; - fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; - fb->fb.screen_size = fbinfo.screen_size; -- -- if (!fb->dma_addr) { -- if (fb->fb.screen_base) -- iounmap(fb->fb.screen_base); -- -- fb->fb.screen_base = ioremap_wc(fbinfo.base, -- fb->fb.screen_size); -- } else { -- fb->fb.screen_base = fb->cpuaddr; -- } -- -+ if (fb->fb.screen_base) -+ iounmap(fb->fb.screen_base); -+ fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); - if (!fb->fb.screen_base) { - /* the console may currently be locked */ - console_trylock(); ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -138,7 +138,6 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, - RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, - RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, -- RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, - RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, - RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, - RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, diff --git a/target/linux/brcm2708/patches-4.19/950-0675-drm-vc4-Add-support-for-color-encoding-on-YUV-planes.patch b/target/linux/brcm2708/patches-4.19/950-0675-drm-vc4-Add-support-for-color-encoding-on-YUV-planes.patch deleted file mode 100644 index aa430490fc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0675-drm-vc4-Add-support-for-color-encoding-on-YUV-planes.patch +++ /dev/null @@ -1,110 +0,0 @@ -From ee96684cb2f528ad1036ae9a9126c9118a80dfbe Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 24 Jun 2019 02:29:40 +0100 -Subject: [PATCH 675/806] drm/vc4: Add support for color encoding on YUV planes - -Adds signalling for BT601/709/2020, and limited/full range -(on BT601). - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 32 +++++++++++++++++++++++++- - drivers/gpu/drm/vc4/vc_image_types.h | 28 ++++++++++++++++++++++ - 2 files changed, 59 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -66,7 +66,7 @@ struct set_plane { - u8 alpha; - u8 num_planes; - u8 is_vu; -- u8 padding; -+ u8 color_encoding; - - u32 planes[4]; /* DMA address of each plane */ - -@@ -454,6 +454,28 @@ static void vc4_plane_atomic_update(stru - if (num_planes == 3 && - (fb->offsets[2] - fb->offsets[1]) == fb->pitches[1]) - mb->plane.vc_image_type = VC_IMAGE_YUV420_S; -+ -+ switch (state->color_encoding) { -+ default: -+ case DRM_COLOR_YCBCR_BT601: -+ if (state->color_range == DRM_COLOR_YCBCR_LIMITED_RANGE) -+ mb->plane.color_encoding = -+ VC_IMAGE_YUVINFO_CSC_ITUR_BT601; -+ else -+ mb->plane.color_encoding = -+ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF; -+ break; -+ case DRM_COLOR_YCBCR_BT709: -+ /* Currently no support for a full range BT709 */ -+ mb->plane.color_encoding = -+ VC_IMAGE_YUVINFO_CSC_ITUR_BT709; -+ break; -+ case DRM_COLOR_YCBCR_BT2020: -+ /* Currently no support for a full range BT2020 */ -+ mb->plane.color_encoding = -+ VC_IMAGE_YUVINFO_CSC_REC_2020; -+ break; -+ } - } else { - mb->plane.planes[1] = 0; - mb->plane.planes[2] = 0; -@@ -643,6 +665,14 @@ static struct drm_plane *vc4_fkms_plane_ - drm_plane_create_alpha_property(plane); - drm_plane_create_rotation_property(plane, DRM_MODE_ROTATE_0, - SUPPORTED_ROTATIONS); -+ drm_plane_create_color_properties(plane, -+ BIT(DRM_COLOR_YCBCR_BT601) | -+ BIT(DRM_COLOR_YCBCR_BT709) | -+ BIT(DRM_COLOR_YCBCR_BT2020), -+ BIT(DRM_COLOR_YCBCR_LIMITED_RANGE) | -+ BIT(DRM_COLOR_YCBCR_FULL_RANGE), -+ DRM_COLOR_YCBCR_BT709, -+ DRM_COLOR_YCBCR_LIMITED_RANGE); - - /* - * Default frame buffer setup is with FB on -127, and raspistill etc ---- a/drivers/gpu/drm/vc4/vc_image_types.h -+++ b/drivers/gpu/drm/vc4/vc_image_types.h -@@ -4,6 +4,8 @@ - * - * Values taken from vc_image_types.h released by Broadcom at - * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_types.h -+ * and vc_image_structs.h at -+ * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_structs.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as -@@ -141,3 +143,29 @@ enum { - VC_IMAGE_MAX, /* bounds for error checking */ - VC_IMAGE_FORCE_ENUM_16BIT = 0xffff, - }; -+ -+enum { -+ /* Unknown or unset - defaults to BT601 interstitial */ -+ VC_IMAGE_YUVINFO_UNSPECIFIED = 0, -+ -+ /* colour-space conversions data [4 bits] */ -+ -+ /* ITU-R BT.601-5 [SDTV] (compatible with VideoCore-II) */ -+ VC_IMAGE_YUVINFO_CSC_ITUR_BT601 = 1, -+ /* ITU-R BT.709-3 [HDTV] */ -+ VC_IMAGE_YUVINFO_CSC_ITUR_BT709 = 2, -+ /* JPEG JFIF */ -+ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF = 3, -+ /* Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ -+ VC_IMAGE_YUVINFO_CSC_FCC = 4, -+ /* Society of Motion Picture and Television Engineers 240M (1999) */ -+ VC_IMAGE_YUVINFO_CSC_SMPTE_240M = 5, -+ /* ITU-R BT.470-2 System M */ -+ VC_IMAGE_YUVINFO_CSC_ITUR_BT470_2_M = 6, -+ /* ITU-R BT.470-2 System B,G */ -+ VC_IMAGE_YUVINFO_CSC_ITUR_BT470_2_BG = 7, -+ /* JPEG JFIF, but with 16..255 luma */ -+ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF_Y16_255 = 8, -+ /* Rec 2020 */ -+ VC_IMAGE_YUVINFO_CSC_REC_2020 = 9, -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0675-drm-vc4-hdmi-Set-default-state-margin-at-reset.patch b/target/linux/brcm2708/patches-4.19/950-0675-drm-vc4-hdmi-Set-default-state-margin-at-reset.patch new file mode 100644 index 0000000000..b1b554ed52 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0675-drm-vc4-hdmi-Set-default-state-margin-at-reset.patch @@ -0,0 +1,41 @@ +From 1adef5f9443f148db0817099504df0a7fb7350dd Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 19 Jun 2019 12:17:53 +0200 +Subject: [PATCH] drm/vc4: hdmi: Set default state margin at reset +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Now that the TV margins are properly parsed and filled into +drm_cmdline_mode, we just need to initialise the first state at reset to +get those values and start using them. + +Acked-by: Eric Anholt +Reviewed-by: Noralf Trønnes +Signed-off-by: Maxime Ripard +Link: https://patchwork.freedesktop.org/patch/msgid/44e24172e300be6a41578517021ef6a6e90ed682.1560783090.git-series.maxime.ripard@bootlin.com +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -292,11 +292,17 @@ static int vc4_hdmi_connector_get_modes( + return ret; + } + ++static void vc4_hdmi_connector_reset(struct drm_connector *connector) ++{ ++ drm_atomic_helper_connector_reset(connector); ++ drm_atomic_helper_connector_tv_reset(connector); ++} ++ + static const struct drm_connector_funcs vc4_hdmi_connector_funcs = { + .detect = vc4_hdmi_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = vc4_hdmi_connector_destroy, +- .reset = drm_atomic_helper_connector_reset, ++ .reset = vc4_hdmi_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0676-drm-vc4-fkms-Set-default-state-margin-at-reset.patch b/target/linux/brcm2708/patches-4.19/950-0676-drm-vc4-fkms-Set-default-state-margin-at-reset.patch new file mode 100644 index 0000000000..c9e095f6e5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0676-drm-vc4-fkms-Set-default-state-margin-at-reset.patch @@ -0,0 +1,34 @@ +From 2cf6bd979b0a5fdb179842308b1670691f6a2ce4 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 23 Jul 2019 11:09:26 +0100 +Subject: [PATCH] drm/vc4: fkms: Set default state margin at reset + +Now that the TV margins are properly parsed and filled into +drm_cmdline_mode, we just need to initialise the first state at reset to +get those values and start using them. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -1457,10 +1457,17 @@ int vc4_connector_atomic_set_property(st + return -EINVAL; + } + ++static void vc4_hdmi_connector_reset(struct drm_connector *connector) ++{ ++ drm_atomic_helper_connector_reset(connector); ++ drm_atomic_helper_connector_tv_reset(connector); ++} ++ + static const struct drm_connector_funcs vc4_fkms_connector_funcs = { + .detect = vc4_fkms_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = vc4_fkms_connector_destroy, ++ .reset = vc4_hdmi_connector_reset, + .atomic_duplicate_state = vc4_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + .atomic_get_property = vc4_connector_atomic_get_property, diff --git a/target/linux/brcm2708/patches-4.19/950-0677-drm-modes-Don-t-apply-cmdline-s-rotation-if-it-wasn-.patch b/target/linux/brcm2708/patches-4.19/950-0677-drm-modes-Don-t-apply-cmdline-s-rotation-if-it-wasn-.patch new file mode 100644 index 0000000000..4cb0a543c0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0677-drm-modes-Don-t-apply-cmdline-s-rotation-if-it-wasn-.patch @@ -0,0 +1,34 @@ +From 6eb9a89c28590203658c0ebcbf29d5b41eb8596a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 23 Jul 2019 14:10:31 +0100 +Subject: [PATCH] drm/modes: Don't apply cmdline's rotation if it + wasn't specified + +Taken from the dri-devel mailing list (11/7/2019) to fixup the cmdline +parsing, but requires changes as things have moved between 4.19 and 5.2. + +From: Dmitry Osipenko + +The rotation mode from cmdline shouldn't be taken into account if it +wasn't specified in the cmdline. This fixes ignored default display +orientation when display mode is given using cmdline without the +rotation being specified. + +Fixes: 1bf4e09227c3 ("drm/modes: Allow to specify rotation and reflection on the commandline") +Signed-off-by: Dmitry Osipenko +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/drm_fb_helper.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/drm_fb_helper.c ++++ b/drivers/gpu/drm/drm_fb_helper.c +@@ -2497,7 +2497,7 @@ static void drm_setup_crtc_rotation(stru + * simple XOR between the two handle the addition nicely. + */ + cmdline = &connector->cmdline_mode; +- if (cmdline->specified) { ++ if (cmdline->specified && cmdline->rotation_reflection) { + unsigned int cmdline_rest, panel_rest; + unsigned int cmdline_rot, panel_rot; + unsigned int sum_rot, sum_rest; diff --git a/target/linux/brcm2708/patches-4.19/950-0678-arm-dts-Add-coherent_pool-1M-to-Pi-4-bootargs.patch b/target/linux/brcm2708/patches-4.19/950-0678-arm-dts-Add-coherent_pool-1M-to-Pi-4-bootargs.patch deleted file mode 100644 index 1ef5063079..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0678-arm-dts-Add-coherent_pool-1M-to-Pi-4-bootargs.patch +++ /dev/null @@ -1,28 +0,0 @@ -From f9dfd577dcc8e3173ddce79bca535eeee0fad1a4 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 2 Jul 2019 17:13:05 +0100 -Subject: [PATCH 678/806] arm: dts: Add coherent_pool=1M to Pi 4 bootargs - -Downstream Raspberry Pi dts files add "coherent_pool=1M" to the kernel -command line to aid the dwc_otg driver, but this excluded Pi 4 which -uses a new XCHI interface instead. UAS also benefits from a larger -coherent_pool value, so replicate the addition in bcm2711-rpi-4-b.dts. - -See: https://github.com/raspberrypi/linux/pull/3040 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -14,7 +14,7 @@ - }; - - chosen { -- bootargs = "8250.nr_uarts=1 cma=64M"; -+ bootargs = "coherent_pool=1M 8250.nr_uarts=1 cma=64M"; - }; - - aliases { diff --git a/target/linux/brcm2708/patches-4.19/950-0678-staging-bcm2835-codec-switch-to-multi-planar-API.patch b/target/linux/brcm2708/patches-4.19/950-0678-staging-bcm2835-codec-switch-to-multi-planar-API.patch new file mode 100644 index 0000000000..ce590c9645 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0678-staging-bcm2835-codec-switch-to-multi-planar-API.patch @@ -0,0 +1,351 @@ +From cb053a15c5c23e775647d6b65fef4c378bf34b5b Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Thu, 18 Jul 2019 17:07:05 +0800 +Subject: [PATCH] staging: bcm2835-codec: switch to multi-planar API + +There are two APIs for mem2mem devices, the older single-planar API and +the newer multi-planar one. Without making things overly complex, the +driver can only support one or the other. However the userspace libv4l2 +library has a plugin that allows multi-planar API devices to service +single-planar consumers. + +Chromium supports the multi-planar API exclusively, though this is +currently limited to ChromiumOS. It would be possible to add support +for generic Linux. + +Switching to the multi-planar API would allow usage of both APIs from +userspace. + +Signed-off-by: Chen-Yu Tsai +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 145 +++++++++--------- + 1 file changed, 76 insertions(+), 69 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -504,7 +504,7 @@ static struct bcm2835_codec_fmt *find_fo + + for (k = 0; k < fmts->num_entries; k++) { + fmt = &fmts->list[k]; +- if (fmt->fourcc == f->fmt.pix.pixelformat) ++ if (fmt->fourcc == f->fmt.pix_mp.pixelformat) + break; + } + if (k == fmts->num_entries) +@@ -522,9 +522,9 @@ static struct bcm2835_codec_q_data *get_ + enum v4l2_buf_type type) + { + switch (type) { +- case V4L2_BUF_TYPE_VIDEO_OUTPUT: ++ case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + return &ctx->q_data[V4L2_M2M_SRC]; +- case V4L2_BUF_TYPE_VIDEO_CAPTURE: ++ case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + return &ctx->q_data[V4L2_M2M_DST]; + default: + v4l2_err(&ctx->dev->v4l2_dev, "%s: Invalid queue type %u\n", +@@ -541,9 +541,9 @@ static struct vchiq_mmal_port *get_port_ + return NULL; + + switch (type) { +- case V4L2_BUF_TYPE_VIDEO_OUTPUT: ++ case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + return &ctx->component->input[0]; +- case V4L2_BUF_TYPE_VIDEO_CAPTURE: ++ case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + return &ctx->component->output[0]; + default: + v4l2_err(&ctx->dev->v4l2_dev, "%s: Invalid queue type %u\n", +@@ -752,7 +752,7 @@ static void handle_fmt_changed(struct bc + format->es.video.crop.width, format->es.video.crop.height, + format->es.video.color_space); + +- q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); ++ q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); + q_data->crop_width = format->es.video.crop.width; + q_data->crop_height = format->es.video.crop.height; + q_data->bytesperline = format->es.video.crop.width; +@@ -945,7 +945,7 @@ static int vidioc_querycap(struct file * + strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + MEM2MEM_NAME); +- cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; ++ cap->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; + } +@@ -996,16 +996,20 @@ static int vidioc_g_fmt(struct bcm2835_c + + q_data = get_q_data(ctx, f->type); + +- f->fmt.pix.width = q_data->crop_width; +- f->fmt.pix.height = q_data->height; +- f->fmt.pix.field = V4L2_FIELD_NONE; +- f->fmt.pix.pixelformat = q_data->fmt->fourcc; +- f->fmt.pix.bytesperline = q_data->bytesperline; +- f->fmt.pix.sizeimage = q_data->sizeimage; +- f->fmt.pix.colorspace = ctx->colorspace; +- f->fmt.pix.xfer_func = ctx->xfer_func; +- f->fmt.pix.ycbcr_enc = ctx->ycbcr_enc; +- f->fmt.pix.quantization = ctx->quant; ++ f->fmt.pix_mp.width = q_data->crop_width; ++ f->fmt.pix_mp.height = q_data->height; ++ f->fmt.pix_mp.pixelformat = q_data->fmt->fourcc; ++ f->fmt.pix_mp.field = V4L2_FIELD_NONE; ++ f->fmt.pix_mp.colorspace = ctx->colorspace; ++ f->fmt.pix_mp.plane_fmt[0].sizeimage = q_data->sizeimage; ++ f->fmt.pix_mp.plane_fmt[0].bytesperline = q_data->bytesperline; ++ f->fmt.pix_mp.num_planes = 1; ++ f->fmt.pix_mp.ycbcr_enc = ctx->ycbcr_enc; ++ f->fmt.pix_mp.quantization = ctx->quant; ++ f->fmt.pix_mp.xfer_func = ctx->xfer_func; ++ ++ memset(f->fmt.pix_mp.plane_fmt[0].reserved, 0, ++ sizeof(f->fmt.pix_mp.plane_fmt[0].reserved)); + + return 0; + } +@@ -1029,17 +1033,17 @@ static int vidioc_try_fmt(struct bcm2835 + * The V4L2 specification requires the driver to correct the format + * struct if any of the dimensions is unsupported + */ +- if (f->fmt.pix.width > MAX_W) +- f->fmt.pix.width = MAX_W; +- if (f->fmt.pix.height > MAX_H) +- f->fmt.pix.height = MAX_H; ++ if (f->fmt.pix_mp.width > MAX_W) ++ f->fmt.pix_mp.width = MAX_W; ++ if (f->fmt.pix_mp.height > MAX_H) ++ f->fmt.pix_mp.height = MAX_H; + + if (!fmt->flags & V4L2_FMT_FLAG_COMPRESSED) { + /* Only clip min w/h on capture. Treat 0x0 as unknown. */ +- if (f->fmt.pix.width < MIN_W) +- f->fmt.pix.width = MIN_W; +- if (f->fmt.pix.height < MIN_H) +- f->fmt.pix.height = MIN_H; ++ if (f->fmt.pix_mp.width < MIN_W) ++ f->fmt.pix_mp.width = MIN_W; ++ if (f->fmt.pix_mp.height < MIN_H) ++ f->fmt.pix_mp.height = MIN_H; + + /* + * For codecs the buffer must have a vertical alignment of 16 +@@ -1048,16 +1052,18 @@ static int vidioc_try_fmt(struct bcm2835 + * some of the pixels are active. + */ + if (ctx->dev->role != ISP) +- f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); ++ f->fmt.pix_mp.height = ALIGN(f->fmt.pix_mp.height, 16); + } +- f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, +- fmt); +- f->fmt.pix.sizeimage = get_sizeimage(f->fmt.pix.bytesperline, +- f->fmt.pix.width, +- f->fmt.pix.height, +- fmt); ++ f->fmt.pix_mp.num_planes = 1; ++ f->fmt.pix_mp.plane_fmt[0].bytesperline = ++ get_bytesperline(f->fmt.pix_mp.width, fmt); ++ f->fmt.pix_mp.plane_fmt[0].sizeimage = ++ get_sizeimage(f->fmt.pix_mp.plane_fmt[0].bytesperline, ++ f->fmt.pix_mp.width, f->fmt.pix_mp.height, fmt); ++ memset(f->fmt.pix_mp.plane_fmt[0].reserved, 0, ++ sizeof(f->fmt.pix_mp.plane_fmt[0].reserved)); + +- f->fmt.pix.field = V4L2_FIELD_NONE; ++ f->fmt.pix_mp.field = V4L2_FIELD_NONE; + + return 0; + } +@@ -1070,8 +1076,8 @@ static int vidioc_try_fmt_vid_cap(struct + + fmt = find_format(f, ctx->dev, true); + if (!fmt) { +- f->fmt.pix.pixelformat = get_default_format(ctx->dev, +- true)->fourcc; ++ f->fmt.pix_mp.pixelformat = get_default_format(ctx->dev, ++ true)->fourcc; + fmt = find_format(f, ctx->dev, true); + } + +@@ -1086,13 +1092,13 @@ static int vidioc_try_fmt_vid_out(struct + + fmt = find_format(f, ctx->dev, false); + if (!fmt) { +- f->fmt.pix.pixelformat = get_default_format(ctx->dev, +- false)->fourcc; ++ f->fmt.pix_mp.pixelformat = get_default_format(ctx->dev, ++ false)->fourcc; + fmt = find_format(f, ctx->dev, false); + } + +- if (!f->fmt.pix.colorspace) +- f->fmt.pix.colorspace = ctx->colorspace; ++ if (!f->fmt.pix_mp.colorspace) ++ f->fmt.pix_mp.colorspace = ctx->colorspace; + + return vidioc_try_fmt(ctx, f, fmt); + } +@@ -1106,9 +1112,10 @@ static int vidioc_s_fmt(struct bcm2835_c + bool update_capture_port = false; + int ret; + +- v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", +- f->type, f->fmt.pix.width, f->fmt.pix.height, +- f->fmt.pix.pixelformat, f->fmt.pix.sizeimage); ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", ++ f->type, f->fmt.pix_mp.width, f->fmt.pix_mp.height, ++ f->fmt.pix_mp.pixelformat, f->fmt.pix_mp.plane_fmt[0].sizeimage); ++ + + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); + if (!vq) +@@ -1124,9 +1131,9 @@ static int vidioc_s_fmt(struct bcm2835_c + } + + q_data->fmt = find_format(f, ctx->dev, +- f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE); +- q_data->crop_width = f->fmt.pix.width; +- q_data->height = f->fmt.pix.height; ++ f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); ++ q_data->crop_width = f->fmt.pix_mp.width; ++ q_data->height = f->fmt.pix_mp.height; + if (!q_data->selection_set) + q_data->crop_height = requested_height; + +@@ -1134,21 +1141,21 @@ static int vidioc_s_fmt(struct bcm2835_c + * Copying the behaviour of vicodec which retains a single set of + * colorspace parameters for both input and output. + */ +- ctx->colorspace = f->fmt.pix.colorspace; +- ctx->xfer_func = f->fmt.pix.xfer_func; +- ctx->ycbcr_enc = f->fmt.pix.ycbcr_enc; +- ctx->quant = f->fmt.pix.quantization; ++ ctx->colorspace = f->fmt.pix_mp.colorspace; ++ ctx->xfer_func = f->fmt.pix_mp.xfer_func; ++ ctx->ycbcr_enc = f->fmt.pix_mp.ycbcr_enc; ++ ctx->quant = f->fmt.pix_mp.quantization; + + /* All parameters should have been set correctly by try_fmt */ +- q_data->bytesperline = f->fmt.pix.bytesperline; +- q_data->sizeimage = f->fmt.pix.sizeimage; ++ q_data->bytesperline = f->fmt.pix_mp.plane_fmt[0].bytesperline; ++ q_data->sizeimage = f->fmt.pix_mp.plane_fmt[0].sizeimage; + + v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Calulated bpl as %u, size %u\n", + q_data->bytesperline, q_data->sizeimage); + + if (ctx->dev->role == DECODE && + q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED && +- f->fmt.pix.width && f->fmt.pix.height) { ++ q_data->crop_width && q_data->height) { + /* + * On the decoder, if provided with a resolution on the input + * side, then replicate that to the output side. +@@ -1165,7 +1172,7 @@ static int vidioc_s_fmt(struct bcm2835_c + q_data_dst->height = ALIGN(q_data->crop_height, 16); + + q_data_dst->bytesperline = +- get_bytesperline(f->fmt.pix.width, q_data_dst->fmt); ++ get_bytesperline(f->fmt.pix_mp.width, q_data_dst->fmt); + q_data_dst->sizeimage = get_sizeimage(q_data_dst->bytesperline, + q_data_dst->crop_width, + q_data_dst->height, +@@ -1215,7 +1222,7 @@ static int vidioc_s_fmt(struct bcm2835_c + static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) + { +- unsigned int height = f->fmt.pix.height; ++ unsigned int height = f->fmt.pix_mp.height; + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); +@@ -1228,7 +1235,7 @@ static int vidioc_s_fmt_vid_cap(struct f + static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) + { +- unsigned int height = f->fmt.pix.height; ++ unsigned int height = f->fmt.pix_mp.height; + int ret; + + ret = vidioc_try_fmt_vid_out(file, priv, f); +@@ -1244,7 +1251,7 @@ static int vidioc_g_selection(struct fil + { + struct bcm2835_codec_ctx *ctx = file2ctx(file); + struct bcm2835_codec_q_data *q_data; +- bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? ++ bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ? + true : false; + + if ((ctx->dev->role == DECODE && !capture_queue) || +@@ -1307,7 +1314,7 @@ static int vidioc_s_selection(struct fil + { + struct bcm2835_codec_ctx *ctx = file2ctx(file); + struct bcm2835_codec_q_data *q_data = NULL; +- bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? ++ bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ? + true : false; + + v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: ctx %p, type %d, q_data %p, target %d, rect x/y %d/%d, w/h %ux%u\n", +@@ -1368,7 +1375,7 @@ static int vidioc_s_parm(struct file *fi + { + struct bcm2835_codec_ctx *ctx = file2ctx(file); + +- if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) ++ if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return -EINVAL; + + ctx->framerate_num = +@@ -1738,15 +1745,15 @@ static int vidioc_encoder_cmd(struct fil + static const struct v4l2_ioctl_ops bcm2835_codec_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + +- .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, +- .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, +- .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, +- .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, +- +- .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, +- .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, +- .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, +- .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, ++ .vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap, ++ .vidioc_g_fmt_vid_cap_mplane = vidioc_g_fmt_vid_cap, ++ .vidioc_try_fmt_vid_cap_mplane = vidioc_try_fmt_vid_cap, ++ .vidioc_s_fmt_vid_cap_mplane = vidioc_s_fmt_vid_cap, ++ ++ .vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out, ++ .vidioc_g_fmt_vid_out_mplane = vidioc_g_fmt_vid_out, ++ .vidioc_try_fmt_vid_out_mplane = vidioc_try_fmt_vid_out, ++ .vidioc_s_fmt_vid_out_mplane = vidioc_s_fmt_vid_out, + + .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, +@@ -2089,7 +2096,7 @@ static int bcm2835_codec_start_streaming + ctx->component_enabled = true; + } + +- if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { ++ if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + /* + * Create the EOS buffer. + * We only need the MMAL part, and want to NOT attach a memory +@@ -2216,7 +2223,7 @@ static int queue_init(void *priv, struct + struct bcm2835_codec_ctx *ctx = priv; + int ret; + +- src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; ++ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_MMAP | VB2_DMABUF; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct m2m_mmal_buffer); +@@ -2230,7 +2237,7 @@ static int queue_init(void *priv, struct + if (ret) + return ret; + +- dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_MMAP | VB2_DMABUF; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct m2m_mmal_buffer); diff --git a/target/linux/brcm2708/patches-4.19/950-0679-staging-bcm2835-codec-implement-V4L2_CID_MIN_BUFFERS.patch b/target/linux/brcm2708/patches-4.19/950-0679-staging-bcm2835-codec-implement-V4L2_CID_MIN_BUFFERS.patch new file mode 100644 index 0000000000..cd19bc2573 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0679-staging-bcm2835-codec-implement-V4L2_CID_MIN_BUFFERS.patch @@ -0,0 +1,46 @@ +From 1f524b04b040978e2d96380ff40c3e80feba49a5 Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Mon, 22 Jul 2019 22:13:30 +0800 +Subject: [PATCH] staging: bcm2835-codec: implement + V4L2_CID_MIN_BUFFERS_FOR_CAPTURE + +The stateful decoder specification shows an optional step for retrieving +the miminum number of capture buffers required for the decoder to +proceed. While not a required parameter, having it makes some +applications happy. + +bcm2835-codec is a little different from other decoder implementations +in that there is an intermediate format conversion between the hardware +and V4L2 buffers. The number of capture buffers required is therefore +independent of the stream and DPB etc. + +There are plans to remove the conversion, but it requires a fair amount +of rework within the firmware. Until that is done, simply return a value +of 1. + +Signed-off-by: Chen-Yu Tsai +--- + .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -2357,6 +2357,18 @@ static int bcm2835_codec_open(struct fil + } + ctx->fh.ctrl_handler = hdl; + v4l2_ctrl_handler_setup(hdl); ++ } else if (dev->role == DECODE) { ++ v4l2_ctrl_handler_init(hdl, 1); ++ ++ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, ++ V4L2_CID_MIN_BUFFERS_FOR_CAPTURE, ++ 1, 1, 1, 1); ++ if (hdl->error) { ++ rc = hdl->error; ++ goto free_ctrl_handler; ++ } ++ ctx->fh.ctrl_handler = hdl; ++ v4l2_ctrl_handler_setup(hdl); + } + + ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); diff --git a/target/linux/brcm2708/patches-4.19/950-0680-staging-bcm2835-codec-set-device_caps-in-struct-vide.patch b/target/linux/brcm2708/patches-4.19/950-0680-staging-bcm2835-codec-set-device_caps-in-struct-vide.patch new file mode 100644 index 0000000000..f7243f34b1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0680-staging-bcm2835-codec-set-device_caps-in-struct-vide.patch @@ -0,0 +1,40 @@ +From c369e173f9ff254ed3c3b9062e04917122e3536e Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Mon, 22 Jul 2019 22:20:55 +0800 +Subject: [PATCH] staging: bcm2835-codec: set device_caps in struct + video_device + +Instead of filling in the struct v4l2_capability device_caps +field, fill in the struct video_device device_caps field. + +That way the V4L2 core knows what the capabilities of the +video device are. + +This is similar to a cleanup series by Hans Verkuil [1]. + +[1] https://www.spinics.net/lists/linux-media/msg153313.html + +Signed-off-by: Chen-Yu Tsai +--- + .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -945,8 +945,6 @@ static int vidioc_querycap(struct file * + strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + MEM2MEM_NAME); +- cap->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; +- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; + } + +@@ -2600,6 +2598,7 @@ static int bcm2835_codec_create(struct p + vfd = &dev->vfd; + vfd->lock = &dev->dev_mutex; + vfd->v4l2_dev = &dev->v4l2_dev; ++ vfd->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; + + switch (role) { + case DECODE: diff --git a/target/linux/brcm2708/patches-4.19/950-0681-Add-HDMI1-facility-to-the-driver.patch b/target/linux/brcm2708/patches-4.19/950-0681-Add-HDMI1-facility-to-the-driver.patch new file mode 100644 index 0000000000..7594d16a41 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0681-Add-HDMI1-facility-to-the-driver.patch @@ -0,0 +1,85 @@ +From 0a37470a112260ef1c9a016a400fdf1f8792eadc Mon Sep 17 00:00:00 2001 +From: James Hughes +Date: Tue, 16 Jul 2019 12:18:21 +0100 +Subject: [PATCH] Add HDMI1 facility to the driver. + +For generic ALSA, all you need is the bcm2835.h change, but +have also added structures for IEC958 HDMI. Not sure how to +test those. +--- + .../vc04_services/bcm2835-audio/bcm2835.c | 29 ++++++++++++++++--- + .../vc04_services/bcm2835-audio/bcm2835.h | 4 ++- + 2 files changed, 28 insertions(+), 5 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +@@ -79,7 +79,11 @@ static int bcm2835_audio_alsa_newpcm(str + if (err) + return err; + +- err = snd_bcm2835_new_pcm(chip, "bcm2835 IEC958/HDMI", 1, 0, 1, true); ++ err = snd_bcm2835_new_pcm(chip, "bcm2835 IEC958/HDMI", 1, AUDIO_DEST_HDMI0, 1, true); ++ if (err) ++ return err; ++ ++ err = snd_bcm2835_new_pcm(chip, "bcm2835 IEC958/HDMI1", 2, AUDIO_DEST_HDMI1, 1, true); + if (err) + return err; + +@@ -106,7 +110,7 @@ static struct bcm2835_audio_driver bcm28 + .newctl = snd_bcm2835_new_ctl, + }; + +-static struct bcm2835_audio_driver bcm2835_audio_hdmi = { ++static struct bcm2835_audio_driver bcm2835_audio_hdmi0 = { + .driver = { + .name = "bcm2835_hdmi", + .owner = THIS_MODULE, +@@ -116,7 +120,20 @@ static struct bcm2835_audio_driver bcm28 + .minchannels = 1, + .newpcm = bcm2835_audio_simple_newpcm, + .newctl = snd_bcm2835_new_hdmi_ctl, +- .route = AUDIO_DEST_HDMI ++ .route = AUDIO_DEST_HDMI0 ++}; ++ ++static struct bcm2835_audio_driver bcm2835_audio_hdmi1 = { ++ .driver = { ++ .name = "bcm2835_hdmi", ++ .owner = THIS_MODULE, ++ }, ++ .shortname = "bcm2835 HDMI 1", ++ .longname = "bcm2835 HDMI 1", ++ .minchannels = 1, ++ .newpcm = bcm2835_audio_simple_newpcm, ++ .newctl = snd_bcm2835_new_hdmi_ctl, ++ .route = AUDIO_DEST_HDMI1 + }; + + static struct bcm2835_audio_driver bcm2835_audio_headphones = { +@@ -143,7 +160,11 @@ static struct bcm2835_audio_drivers chil + .is_enabled = &enable_compat_alsa, + }, + { +- .audio_driver = &bcm2835_audio_hdmi, ++ .audio_driver = &bcm2835_audio_hdmi0, ++ .is_enabled = &enable_hdmi, ++ }, ++ { ++ .audio_driver = &bcm2835_audio_hdmi1, + .is_enabled = &enable_hdmi, + }, + { +--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h ++++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +@@ -33,7 +33,9 @@ enum { + enum snd_bcm2835_route { + AUDIO_DEST_AUTO = 0, + AUDIO_DEST_HEADPHONES = 1, +- AUDIO_DEST_HDMI = 2, ++ AUDIO_DEST_HDMI = 2, // for backwards compatibility. ++ AUDIO_DEST_HDMI0 = 2, ++ AUDIO_DEST_HDMI1 = 3, + AUDIO_DEST_MAX, + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0682-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch b/target/linux/brcm2708/patches-4.19/950-0682-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch new file mode 100644 index 0000000000..5ec631f7fd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0682-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch @@ -0,0 +1,194 @@ +From 114845b6010b6e6a320804f2d86ab4d5dc5a06de Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 5 Aug 2019 14:17:14 +0100 +Subject: [PATCH] overlays: Add baudrate parameter to i2c3-i2c6 + +The overlays for enabling the new BCM2711 I2C interfaces were lacking +the means to configure the baud/clock rate. + +Also explictly set the default pins, rather than relying on the values +in the base DTB. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 8 ++++++++ + arch/arm/boot/dts/overlays/i2c3-overlay.dts | 15 ++++++++++++--- + arch/arm/boot/dts/overlays/i2c4-overlay.dts | 15 ++++++++++++--- + arch/arm/boot/dts/overlays/i2c5-overlay.dts | 15 ++++++++++++--- + arch/arm/boot/dts/overlays/i2c6-overlay.dts | 15 ++++++++++++--- + 5 files changed, 56 insertions(+), 12 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1221,6 +1221,8 @@ Info: Enable the i2c3 bus + Load: dtoverlay=i2c3, + Params: pins_2_3 Use GPIOs 2 and 3 + pins_4_5 Use GPIOs 4 and 5 (default) ++ baudrate Set the baudrate for the interface (default ++ "100000") + + + Name: i2c4 +@@ -1228,6 +1230,8 @@ Info: Enable the i2c4 bus + Load: dtoverlay=i2c4, + Params: pins_6_7 Use GPIOs 6 and 7 + pins_8_9 Use GPIOs 8 and 9 (default) ++ baudrate Set the baudrate for the interface (default ++ "100000") + + + Name: i2c5 +@@ -1235,6 +1239,8 @@ Info: Enable the i2c5 bus + Load: dtoverlay=i2c5, + Params: pins_10_11 Use GPIOs 10 and 11 + pins_12_13 Use GPIOs 12 and 13 (default) ++ baudrate Set the baudrate for the interface (default ++ "100000") + + + Name: i2c6 +@@ -1242,6 +1248,8 @@ Info: Enable the i2c6 bus + Load: dtoverlay=i2c6, + Params: pins_0_1 Use GPIOs 0 and 1 + pins_22_23 Use GPIOs 22 and 23 (default) ++ baudrate Set the baudrate for the interface (default ++ "100000") + + + Name: i2s-gpio28-31 +--- a/arch/arm/boot/dts/overlays/i2c3-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c3-overlay.dts +@@ -6,10 +6,11 @@ + + fragment@0 { + target = <&i2c3>; +- __overlay__ { ++ frag0: __overlay__ { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; ++ clock-frequency = <100000>; + }; + }; + +@@ -20,8 +21,16 @@ + }; + }; + ++ fragment@2 { ++ target = <&i2c3_pins>; ++ __overlay__ { ++ brcm,pins = <4 5>; ++ }; ++ }; ++ + __overrides__ { +- pins_2_3 = <0>,"=1"; +- pins_4_5 = <0>,"!1"; ++ pins_2_3 = <0>,"=1!2"; ++ pins_4_5 = <0>,"!1=2"; ++ baudrate = <&frag0>, "clock-frequency:0"; + }; + }; +--- a/arch/arm/boot/dts/overlays/i2c4-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c4-overlay.dts +@@ -6,10 +6,11 @@ + + fragment@0 { + target = <&i2c4>; +- __overlay__ { ++ frag0: __overlay__ { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; ++ clock-frequency = <100000>; + }; + }; + +@@ -20,8 +21,16 @@ + }; + }; + ++ fragment@2 { ++ target = <&i2c4_pins>; ++ __overlay__ { ++ brcm,pins = <8 9>; ++ }; ++ }; ++ + __overrides__ { +- pins_6_7 = <0>,"=1"; +- pins_8_9 = <0>,"!1"; ++ pins_6_7 = <0>,"=1!2"; ++ pins_8_9 = <0>,"!1=2"; ++ baudrate = <&frag0>, "clock-frequency:0"; + }; + }; +--- a/arch/arm/boot/dts/overlays/i2c5-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c5-overlay.dts +@@ -6,10 +6,11 @@ + + fragment@0 { + target = <&i2c5>; +- __overlay__ { ++ frag0: __overlay__ { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; ++ clock-frequency = <100000>; + }; + }; + +@@ -20,8 +21,16 @@ + }; + }; + ++ fragment@2 { ++ target = <&i2c5_pins>; ++ __overlay__ { ++ brcm,pins = <12 13>; ++ }; ++ }; ++ + __overrides__ { +- pins_10_11 = <0>,"=1"; +- pins_12_13 = <0>,"!1"; ++ pins_10_11 = <0>,"=1!2"; ++ pins_12_13 = <0>,"!1=2"; ++ baudrate = <&frag0>, "clock-frequency:0"; + }; + }; +--- a/arch/arm/boot/dts/overlays/i2c6-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c6-overlay.dts +@@ -6,10 +6,11 @@ + + fragment@0 { + target = <&i2c6>; +- __overlay__ { ++ frag0: __overlay__ { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; ++ clock-frequency = <100000>; + }; + }; + +@@ -20,8 +21,16 @@ + }; + }; + ++ fragment@2 { ++ target = <&i2c6_pins>; ++ __overlay__ { ++ brcm,pins = <22 23>; ++ }; ++ }; ++ + __overrides__ { +- pins_0_1 = <0>,"=1"; +- pins_22_23 = <0>,"!1"; ++ pins_0_1 = <0>,"=1!2"; ++ pins_22_23 = <0>,"!1=2"; ++ baudrate = <&frag0>, "clock-frequency:0"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0682-overlays-Correct-gpio-fan-gpio-flags-for-4.19.patch b/target/linux/brcm2708/patches-4.19/950-0682-overlays-Correct-gpio-fan-gpio-flags-for-4.19.patch deleted file mode 100644 index 0e4a020e54..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0682-overlays-Correct-gpio-fan-gpio-flags-for-4.19.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 21e4c9306bd20ab4e02f90cd452d90bc4e4a0a98 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 3 Jul 2019 20:37:14 +0100 -Subject: [PATCH 682/806] overlays: Correct gpio-fan gpio flags for 4.19 - -The gpio-fan overlay was submitted for the 4.14 kernel where the second -value in the Device Tree gpios declaration was ignored (thanks to an -old-style driver), allowing the fan-control output to be active-high -even though the declaration appears to request it be active-low. -The gpio-fan driver in 4.19 uses GPIO descriptors and honours the -active-low flag that the overlay (accidentally?) supplies. - -Change/correct the flags field to mark the GPIO as active-high. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/gpio-fan-overlay.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts -+++ b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts -@@ -45,7 +45,7 @@ - __overlay__ { - fan0: gpio-fan@0 { - compatible = "gpio-fan"; -- gpios = <&gpio 12 1>; -+ gpios = <&gpio 12 0>; - gpio-fan,speed-map = <0 0>, - <5000 1>; - #cooling-cells = <2>; diff --git a/target/linux/brcm2708/patches-4.19/950-0683-drm-vc4-Resolve-the-vblank-warnings-on-mode-switchin.patch b/target/linux/brcm2708/patches-4.19/950-0683-drm-vc4-Resolve-the-vblank-warnings-on-mode-switchin.patch new file mode 100644 index 0000000000..e88bfc6be8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0683-drm-vc4-Resolve-the-vblank-warnings-on-mode-switchin.patch @@ -0,0 +1,100 @@ +From df276f0a5aa865c7926d9d148605d1a59d1d4fbb Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 25 Jul 2019 17:27:44 +0100 +Subject: [PATCH] drm/vc4: Resolve the vblank warnings on mode + switching + +The details over when and how a driver is to service the +vblank events are sketchy, and the fkms driver was triggering +a kernel warning every time the crtc was enabled or disabled. + +Copy the event handling as used by the vc4-kms driver slightly +more closely, and we avoid the warnings. + +https://github.com/raspberrypi/linux/issues/3020 + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 48 ++++++++++++++++++-------- + 1 file changed, 33 insertions(+), 15 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -933,6 +933,7 @@ static void vc4_crtc_mode_set_nofb(struc + + static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) + { ++ struct drm_device *dev = crtc->dev; + struct drm_plane *plane; + + DRM_DEBUG_KMS("[CRTC:%d] vblanks off.\n", +@@ -948,6 +949,35 @@ static void vc4_crtc_disable(struct drm_ + + drm_atomic_crtc_for_each_plane(plane, crtc) + vc4_plane_atomic_disable(plane, plane->state); ++ ++ /* ++ * Make sure we issue a vblank event after disabling the CRTC if ++ * someone was waiting it. ++ */ ++ if (crtc->state->event) { ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ drm_crtc_send_vblank_event(crtc, crtc->state->event); ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++ } ++} ++ ++static void vc4_crtc_consume_event(struct drm_crtc *crtc) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ crtc->state->event->pipe = drm_crtc_index(crtc); ++ ++ WARN_ON(drm_crtc_vblank_get(crtc) != 0); ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ vc4_crtc->event = crtc->state->event; ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); + } + + static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) +@@ -957,6 +987,7 @@ static void vc4_crtc_enable(struct drm_c + DRM_DEBUG_KMS("[CRTC:%d] vblanks on.\n", + crtc->base.id); + drm_crtc_vblank_on(crtc); ++ vc4_crtc_consume_event(crtc); + + /* Unblank the planes (if they're supposed to be displayed). */ + drm_atomic_crtc_for_each_plane(plane, crtc) +@@ -1028,23 +1059,10 @@ static int vc4_crtc_atomic_check(struct + static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_crtc_state *old_state) + { +- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); +- struct drm_device *dev = crtc->dev; +- + DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_flush.\n", + crtc->base.id); +- if (crtc->state->event) { +- unsigned long flags; +- +- crtc->state->event->pipe = drm_crtc_index(crtc); +- +- WARN_ON(drm_crtc_vblank_get(crtc) != 0); +- +- spin_lock_irqsave(&dev->event_lock, flags); +- vc4_crtc->event = crtc->state->event; +- crtc->state->event = NULL; +- spin_unlock_irqrestore(&dev->event_lock, flags); +- } ++ if (crtc->state->active && old_state->active && crtc->state->event) ++ vc4_crtc_consume_event(crtc); + } + + static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) diff --git a/target/linux/brcm2708/patches-4.19/950-0683-staging-vcsm-cma-Remove-cache-manipulation-ioctl-fro.patch b/target/linux/brcm2708/patches-4.19/950-0683-staging-vcsm-cma-Remove-cache-manipulation-ioctl-fro.patch deleted file mode 100644 index 7463d0750c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0683-staging-vcsm-cma-Remove-cache-manipulation-ioctl-fro.patch +++ /dev/null @@ -1,78 +0,0 @@ -From b30537425b4bf90311b8d43c95484d9d339be25f Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 25 Jun 2019 00:29:44 +0100 -Subject: [PATCH 683/806] staging: vcsm-cma: Remove cache manipulation ioctl - from ARM64 - -The cache flushing ioctls are used by the Pi3 HEVC hw-assisted -decoder as it needs finer grained flushing control than dma_ops -allow. -These cache calls are not present for ARM64, therefore disable -them. We are not actively supporting 64bit kernels at present, -and the use case of the HEVC decoder is fairly limited. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -1259,6 +1259,7 @@ error: - return ret; - } - -+#ifndef CONFIG_ARM64 - /* Converts VCSM_CACHE_OP_* to an operating function. */ - static void (*cache_op_to_func(const unsigned int cache_op)) - (const void*, const void*) -@@ -1351,6 +1352,7 @@ out: - - return ret; - } -+#endif - - static long vc_sm_cma_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -@@ -1448,6 +1450,7 @@ static long vc_sm_cma_ioctl(struct file - break; - } - -+#ifndef CONFIG_ARM64 - /* - * Flush/Invalidate the cache for a given mapping. - * Blocks must be pinned (i.e. accessed) before this call. -@@ -1455,6 +1458,7 @@ static long vc_sm_cma_ioctl(struct file - case VC_SM_CMA_CMD_CLEAN_INVALID2: - ret = vc_sm_cma_clean_invalid2(cmdnr, arg); - break; -+#endif - - default: - pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, -@@ -1467,6 +1471,7 @@ static long vc_sm_cma_ioctl(struct file - return ret; - } - -+#ifndef CONFIG_ARM64 - #ifdef CONFIG_COMPAT - struct vc_sm_cma_ioctl_clean_invalid2_32 { - u32 op_count; -@@ -1496,14 +1501,17 @@ static long vc_sm_cma_compat_ioctl(struc - } - } - #endif -+#endif - - /* Device operations that we managed in this driver. */ - static const struct file_operations vc_sm_ops = { - .owner = THIS_MODULE, - .unlocked_ioctl = vc_sm_cma_ioctl, -+#ifndef CONFIG_ARM64 - #ifdef CONFIG_COMPAT - .compat_ioctl = vc_sm_cma_compat_ioctl, - #endif -+#endif - .open = vc_sm_cma_open, - .release = vc_sm_cma_release, - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0684-drm-vc4-Remove-unused-mode-variable.patch b/target/linux/brcm2708/patches-4.19/950-0684-drm-vc4-Remove-unused-mode-variable.patch new file mode 100644 index 0000000000..e12cac2c85 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0684-drm-vc4-Remove-unused-mode-variable.patch @@ -0,0 +1,27 @@ +From b2f463facb358b917380683b5e86c5d1cb3db123 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 25 Jul 2019 17:34:29 +0100 +Subject: [PATCH] drm/vc4: Remove unused mode variable + +"89d1376 drm/vc4: Add support for margins to fkms" removed +the requirement for having the mode structure from vc4_plane_to_mb, +but didn't remove it as a local to the function, causing a +compiler warning. + +Remove the unused variable. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -523,7 +523,6 @@ static int vc4_plane_to_mb(struct drm_pl + const struct vc_image_format *vc_fmt = + vc4_get_vc_image_fmt(drm_fmt->format); + int num_planes = fb->format->num_planes; +- struct drm_display_mode *mode = &state->crtc->mode; + unsigned int rotation = SUPPORTED_ROTATIONS; + + mb->plane.vc_image_type = vc_fmt->vc_image; diff --git a/target/linux/brcm2708/patches-4.19/950-0684-staging-vcsm-cma-Rework-to-use-dma-APIs-not-CMA.patch b/target/linux/brcm2708/patches-4.19/950-0684-staging-vcsm-cma-Rework-to-use-dma-APIs-not-CMA.patch deleted file mode 100644 index f0f51ef1f3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0684-staging-vcsm-cma-Rework-to-use-dma-APIs-not-CMA.patch +++ /dev/null @@ -1,758 +0,0 @@ -From e4cb138abe457a6ab9b98458660a1c8e548fab7f Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 1 Jul 2019 11:57:25 +0100 -Subject: [PATCH 684/806] staging: vcsm-cma: Rework to use dma APIs, not CMA - -Due to a misunderstanding of the DMA mapping APIs, I made -the wrong decision on how to implement this. - -Rework to use dma_alloc_coherent instead of the CMA -API. This also allows it to be built as a module easily. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/vc-sm-cma/Kconfig | 4 +- - .../staging/vc04_services/vc-sm-cma/Makefile | 2 +- - .../staging/vc04_services/vc-sm-cma/vc_sm.c | 291 ++++++++++-------- - .../staging/vc04_services/vc-sm-cma/vc_sm.h | 13 +- - .../vc04_services/vc-sm-cma/vc_sm_cma.c | 98 ------ - .../vc04_services/vc-sm-cma/vc_sm_cma.h | 39 --- - 6 files changed, 168 insertions(+), 279 deletions(-) - delete mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c - delete mode 100644 drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h - ---- a/drivers/staging/vc04_services/vc-sm-cma/Kconfig -+++ b/drivers/staging/vc04_services/vc-sm-cma/Kconfig -@@ -1,6 +1,6 @@ - config BCM_VC_SM_CMA -- bool "VideoCore Shared Memory (CMA) driver" -- depends on BCM2835_VCHIQ && DMA_CMA -+ tristate "VideoCore Shared Memory (CMA) driver" -+ depends on BCM2835_VCHIQ - select RBTREE - select DMA_SHARED_BUFFER - help ---- a/drivers/staging/vc04_services/vc-sm-cma/Makefile -+++ b/drivers/staging/vc04_services/vc-sm-cma/Makefile -@@ -3,6 +3,6 @@ ccflags-y += -Idrivers/staging/vc04_serv - ccflags-y += -D__VCCOREVER__=0 - - vc-sm-cma-$(CONFIG_BCM_VC_SM_CMA) := \ -- vc_sm.o vc_sm_cma_vchi.o vc_sm_cma.o -+ vc_sm.o vc_sm_cma_vchi.o - - obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma.o ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -6,8 +6,8 @@ - * Dave Stevenson - * - * Based on vmcs_sm driver from Broadcom Corporation for some API, -- * and taking some code for CMA/dmabuf handling from the Android Ion -- * driver (Google/Linaro). -+ * and taking some code for buffer allocation and dmabuf handling from -+ * videobuf2. - * - * - * This driver has 3 main uses: -@@ -52,7 +52,6 @@ - #include "vc_sm_cma_vchi.h" - - #include "vc_sm.h" --#include "vc_sm_cma.h" - #include "vc_sm_knl.h" - #include - -@@ -89,7 +88,6 @@ struct sm_state_t { - struct miscdevice misc_dev; - - struct sm_instance *sm_handle; /* Handle for videocore service. */ -- struct cma *cma_heap; - - spinlock_t kernelid_map_lock; /* Spinlock protecting kernelid_map */ - struct idr kernelid_map; -@@ -110,8 +108,9 @@ struct sm_state_t { - - struct vc_sm_dma_buf_attachment { - struct device *dev; -- struct sg_table *table; -+ struct sg_table sg_table; - struct list_head list; -+ enum dma_data_direction dma_dir; - }; - - /* ---- Private Variables ----------------------------------------------- */ -@@ -202,9 +201,10 @@ static int vc_sm_cma_global_state_show(s - resource->import.attach); - seq_printf(s, " SGT %p\n", - resource->import.sgt); -+ } else { -+ seq_printf(s, " SGT %p\n", -+ resource->alloc.sg_table); - } -- seq_printf(s, " SG_TABLE %p\n", -- resource->sg_table); - seq_printf(s, " DMA_ADDR %pad\n", - &resource->dma_addr); - seq_printf(s, " VC_HANDLE %08x\n", -@@ -296,8 +296,9 @@ static void vc_sm_vpu_free(struct vc_sm_ - */ - static void vc_sm_release_resource(struct vc_sm_buffer *buffer) - { -- pr_debug("[%s]: buffer %p (name %s, size %zu)\n", -- __func__, buffer, buffer->name, buffer->size); -+ pr_debug("[%s]: buffer %p (name %s, size %zu), imported %u\n", -+ __func__, buffer, buffer->name, buffer->size, -+ buffer->imported); - - if (buffer->vc_handle) { - /* We've sent the unmap request but not had the response. */ -@@ -313,8 +314,6 @@ static void vc_sm_release_resource(struc - - /* Release the allocation (whether imported dmabuf or CMA allocation) */ - if (buffer->imported) { -- pr_debug("%s: Release imported dmabuf %p\n", __func__, -- buffer->import.dma_buf); - if (buffer->import.dma_buf) - dma_buf_put(buffer->import.dma_buf); - else -@@ -322,16 +321,8 @@ static void vc_sm_release_resource(struc - __func__, buffer); - buffer->import.dma_buf = NULL; - } else { -- if (buffer->sg_table) { -- /* Our own allocation that we need to dma_unmap_sg */ -- dma_unmap_sg(&sm_state->pdev->dev, -- buffer->sg_table->sgl, -- buffer->sg_table->nents, -- DMA_BIDIRECTIONAL); -- } -- pr_debug("%s: Release our allocation\n", __func__); -- vc_sm_cma_buffer_free(&buffer->alloc); -- pr_debug("%s: Release our allocation - done\n", __func__); -+ dma_free_coherent(&sm_state->pdev->dev, buffer->size, -+ buffer->cookie, buffer->dma_addr); - } - - -@@ -371,38 +362,6 @@ static struct vc_sm_privdata_t *vc_sm_cm - return file_data; - } - --static struct sg_table *dup_sg_table(struct sg_table *table) --{ -- struct sg_table *new_table; -- int ret, i; -- struct scatterlist *sg, *new_sg; -- -- new_table = kzalloc(sizeof(*new_table), GFP_KERNEL); -- if (!new_table) -- return ERR_PTR(-ENOMEM); -- -- ret = sg_alloc_table(new_table, table->nents, GFP_KERNEL); -- if (ret) { -- kfree(new_table); -- return ERR_PTR(ret); -- } -- -- new_sg = new_table->sgl; -- for_each_sg(table->sgl, sg, table->nents, i) { -- memcpy(new_sg, sg, sizeof(*sg)); -- sg->dma_address = 0; -- new_sg = sg_next(new_sg); -- } -- -- return new_table; --} -- --static void free_duped_table(struct sg_table *table) --{ -- sg_free_table(table); -- kfree(table); --} -- - /* Dma buf operations for use with our own allocations */ - - static int vc_sm_dma_buf_attach(struct dma_buf *dmabuf, -@@ -410,28 +369,45 @@ static int vc_sm_dma_buf_attach(struct d - - { - struct vc_sm_dma_buf_attachment *a; -- struct sg_table *table; -+ struct sg_table *sgt; - struct vc_sm_buffer *buf = dmabuf->priv; -+ struct scatterlist *rd, *wr; -+ int ret, i; - - a = kzalloc(sizeof(*a), GFP_KERNEL); - if (!a) - return -ENOMEM; - -- table = dup_sg_table(buf->sg_table); -- if (IS_ERR(table)) { -+ pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); -+ -+ mutex_lock(&buf->lock); -+ -+ INIT_LIST_HEAD(&a->list); -+ -+ sgt = &a->sg_table; -+ -+ /* Copy the buf->base_sgt scatter list to the attachment, as we can't -+ * map the same scatter list to multiple attachments at the same time. -+ */ -+ ret = sg_alloc_table(sgt, buf->alloc.sg_table->orig_nents, GFP_KERNEL); -+ if (ret) { - kfree(a); -- return PTR_ERR(table); -+ return -ENOMEM; - } - -- a->table = table; -- INIT_LIST_HEAD(&a->list); -+ rd = buf->alloc.sg_table->sgl; -+ wr = sgt->sgl; -+ for (i = 0; i < sgt->orig_nents; ++i) { -+ sg_set_page(wr, sg_page(rd), rd->length, rd->offset); -+ rd = sg_next(rd); -+ wr = sg_next(wr); -+ } - -+ a->dma_dir = DMA_NONE; - attachment->priv = a; - -- mutex_lock(&buf->lock); - list_add(&a->list, &buf->attachments); - mutex_unlock(&buf->lock); -- pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); - - return 0; - } -@@ -441,9 +417,20 @@ static void vc_sm_dma_buf_detach(struct - { - struct vc_sm_dma_buf_attachment *a = attachment->priv; - struct vc_sm_buffer *buf = dmabuf->priv; -+ struct sg_table *sgt; - - pr_debug("%s dmabuf %p attachment %p\n", __func__, dmabuf, attachment); -- free_duped_table(a->table); -+ if (!a) -+ return; -+ -+ sgt = &a->sg_table; -+ -+ /* release the scatterlist cache */ -+ if (a->dma_dir != DMA_NONE) -+ dma_unmap_sg(attachment->dev, sgt->sgl, sgt->orig_nents, -+ a->dma_dir); -+ sg_free_table(sgt); -+ - mutex_lock(&buf->lock); - list_del(&a->list); - mutex_unlock(&buf->lock); -@@ -455,13 +442,38 @@ static struct sg_table *vc_sm_map_dma_bu - enum dma_data_direction direction) - { - struct vc_sm_dma_buf_attachment *a = attachment->priv; -+ /* stealing dmabuf mutex to serialize map/unmap operations */ -+ struct mutex *lock = &attachment->dmabuf->lock; - struct sg_table *table; - -- table = a->table; -+ mutex_lock(lock); -+ pr_debug("%s attachment %p\n", __func__, attachment); -+ table = &a->sg_table; -+ -+ /* return previously mapped sg table */ -+ if (a->dma_dir == direction) { -+ mutex_unlock(lock); -+ return table; -+ } -+ -+ /* release any previous cache */ -+ if (a->dma_dir != DMA_NONE) { -+ dma_unmap_sg(attachment->dev, table->sgl, table->orig_nents, -+ a->dma_dir); -+ a->dma_dir = DMA_NONE; -+ } -+ -+ /* mapping to the client with new direction */ -+ table->nents = dma_map_sg(attachment->dev, table->sgl, -+ table->orig_nents, direction); -+ if (!table->nents) { -+ pr_err("failed to map scatterlist\n"); -+ mutex_unlock(lock); -+ return ERR_PTR(-EIO); -+ } - -- if (!dma_map_sg(attachment->dev, table->sgl, table->nents, -- direction)) -- return ERR_PTR(-ENOMEM); -+ a->dma_dir = direction; -+ mutex_unlock(lock); - - pr_debug("%s attachment %p\n", __func__, attachment); - return table; -@@ -478,41 +490,26 @@ static void vc_sm_unmap_dma_buf(struct d - static int vc_sm_dmabuf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma) - { - struct vc_sm_buffer *buf = dmabuf->priv; -- struct sg_table *table = buf->sg_table; -- unsigned long addr = vma->vm_start; -- unsigned long offset = vma->vm_pgoff * PAGE_SIZE; -- struct scatterlist *sg; -- int i; -- int ret = 0; -+ int ret; - - pr_debug("%s dmabuf %p, buf %p, vm_start %08lX\n", __func__, dmabuf, -- buf, addr); -+ buf, vma->vm_start); - - mutex_lock(&buf->lock); - - /* now map it to userspace */ -- for_each_sg(table->sgl, sg, table->nents, i) { -- struct page *page = sg_page(sg); -- unsigned long remainder = vma->vm_end - addr; -- unsigned long len = sg->length; -+ vma->vm_pgoff = 0; - -- if (offset >= sg->length) { -- offset -= sg->length; -- continue; -- } else if (offset) { -- page += offset / PAGE_SIZE; -- len = sg->length - offset; -- offset = 0; -- } -- len = min(len, remainder); -- ret = remap_pfn_range(vma, addr, page_to_pfn(page), len, -- vma->vm_page_prot); -- if (ret) -- break; -- addr += len; -- if (addr >= vma->vm_end) -- break; -+ ret = dma_mmap_coherent(&sm_state->pdev->dev, vma, buf->cookie, -+ buf->dma_addr, buf->size); -+ -+ if (ret) { -+ pr_err("Remapping memory failed, error: %d\n", ret); -+ return ret; - } -+ -+ vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; -+ - mutex_unlock(&buf->lock); - - if (ret) -@@ -570,8 +567,8 @@ static int vc_sm_dma_buf_begin_cpu_acces - mutex_lock(&buf->lock); - - list_for_each_entry(a, &buf->attachments, list) { -- dma_sync_sg_for_cpu(a->dev, a->table->sgl, a->table->nents, -- direction); -+ dma_sync_sg_for_cpu(a->dev, a->sg_table.sgl, -+ a->sg_table.nents, direction); - } - mutex_unlock(&buf->lock); - -@@ -593,8 +590,8 @@ static int vc_sm_dma_buf_end_cpu_access( - mutex_lock(&buf->lock); - - list_for_each_entry(a, &buf->attachments, list) { -- dma_sync_sg_for_device(a->dev, a->table->sgl, a->table->nents, -- direction); -+ dma_sync_sg_for_device(a->dev, a->sg_table.sgl, -+ a->sg_table.nents, direction); - } - mutex_unlock(&buf->lock); - -@@ -625,7 +622,9 @@ static const struct dma_buf_ops dma_buf_ - .map = vc_sm_dma_buf_kmap, - .unmap = vc_sm_dma_buf_kunmap, - }; -+ - /* Dma_buf operations for chaining through to an imported dma_buf */ -+ - static - int vc_sm_import_dma_buf_attach(struct dma_buf *dmabuf, - struct dma_buf_attachment *attachment) -@@ -819,7 +818,7 @@ vc_sm_cma_import_dmabuf_internal(struct - - import.type = VC_SM_ALLOC_NON_CACHED; - dma_addr = sg_dma_address(sgt->sgl); -- import.addr = (uint32_t)dma_addr; -+ import.addr = (u32)dma_addr; - if ((import.addr & 0xC0000000) != 0xC0000000) { - pr_err("%s: Expecting an uncached alias for dma_addr %pad\n", - __func__, &dma_addr); -@@ -911,11 +910,12 @@ error: - return ret; - } - --static int vc_sm_cma_vpu_alloc(u32 size, uint32_t align, const char *name, -+static int vc_sm_cma_vpu_alloc(u32 size, u32 align, const char *name, - u32 mem_handle, struct vc_sm_buffer **ret_buffer) - { - DEFINE_DMA_BUF_EXPORT_INFO(exp_info); - struct vc_sm_buffer *buffer = NULL; -+ struct sg_table *sgt; - int aligned_size; - int ret = 0; - -@@ -938,23 +938,34 @@ static int vc_sm_cma_vpu_alloc(u32 size, - */ - mutex_lock(&buffer->lock); - -- if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, -- aligned_size)) { -- pr_err("[%s]: cma alloc of %d bytes failed\n", -+ buffer->cookie = dma_alloc_coherent(&sm_state->pdev->dev, -+ aligned_size, &buffer->dma_addr, -+ GFP_KERNEL); -+ if (!buffer->cookie) { -+ pr_err("[%s]: dma_alloc_coherent alloc of %d bytes failed\n", - __func__, aligned_size); - ret = -ENOMEM; - goto error; - } -- buffer->sg_table = buffer->alloc.sg_table; - -- pr_debug("[%s]: cma alloc of %d bytes success\n", -+ pr_debug("[%s]: alloc of %d bytes success\n", - __func__, aligned_size); - -- if (dma_map_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, -- buffer->sg_table->nents, DMA_BIDIRECTIONAL) <= 0) { -- pr_err("[%s]: dma_map_sg failed\n", __func__); -+ sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); -+ if (!sgt) { -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ ret = dma_get_sgtable(&sm_state->pdev->dev, sgt, buffer->cookie, -+ buffer->dma_addr, buffer->size); -+ if (ret < 0) { -+ pr_err("failed to get scatterlist from DMA API\n"); -+ kfree(sgt); -+ ret = -ENOMEM; - goto error; - } -+ buffer->alloc.sg_table = sgt; - - INIT_LIST_HEAD(&buffer->attachments); - -@@ -971,10 +982,10 @@ static int vc_sm_cma_vpu_alloc(u32 size, - ret = PTR_ERR(buffer->dma_buf); - goto error; - } -- buffer->dma_addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); -+ buffer->dma_addr = (u32)sg_dma_address(buffer->alloc.sg_table->sgl); - if ((buffer->dma_addr & 0xC0000000) != 0xC0000000) { -- pr_err("%s: Expecting an uncached alias for dma_addr %pad\n", -- __func__, &buffer->dma_addr); -+ pr_warn_once("%s: Expecting an uncached alias for dma_addr %pad\n", -+ __func__, &buffer->dma_addr); - buffer->dma_addr |= 0xC0000000; - } - buffer->private = sm_state->vpu_allocs; -@@ -1145,6 +1156,7 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p - struct vc_sm_import import = { 0 }; - struct vc_sm_import_result result = { 0 }; - struct dma_buf *dmabuf = NULL; -+ struct sg_table *sgt; - int aligned_size; - int ret = 0; - int status; -@@ -1162,18 +1174,13 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p - goto error; - } - -- if (vc_sm_cma_buffer_allocate(sm_state->cma_heap, &buffer->alloc, -- aligned_size)) { -- pr_err("[%s]: cma alloc of %d bytes failed\n", -+ buffer->cookie = dma_alloc_coherent(&sm_state->pdev->dev, -+ aligned_size, -+ &buffer->dma_addr, -+ GFP_KERNEL); -+ if (!buffer->cookie) { -+ pr_err("[%s]: dma_alloc_coherent alloc of %d bytes failed\n", - __func__, aligned_size); -- kfree(buffer); -- return -ENOMEM; -- } -- buffer->sg_table = buffer->alloc.sg_table; -- -- if (dma_map_sg(&sm_state->pdev->dev, buffer->sg_table->sgl, -- buffer->sg_table->nents, DMA_BIDIRECTIONAL) <= 0) { -- pr_err("[%s]: dma_map_sg failed\n", __func__); - ret = -ENOMEM; - goto error; - } -@@ -1204,7 +1211,7 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p - } - buffer->dma_buf = dmabuf; - -- import.addr = (uint32_t)sg_dma_address(buffer->sg_table->sgl); -+ import.addr = buffer->dma_addr; - import.size = aligned_size; - import.kernel_id = get_kernel_id(buffer); - -@@ -1229,10 +1236,25 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p - buffer->private = private; - buffer->vc_handle = result.res_handle; - buffer->size = import.size; -- buffer->dma_addr = import.addr; - buffer->vpu_state = VPU_MAPPED; - buffer->kernel_id = import.kernel_id; -- //buffer->res_cached = ioparam->cached; -+ -+ sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); -+ if (!sgt) { -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ ret = dma_get_sgtable(&sm_state->pdev->dev, sgt, buffer->cookie, -+ buffer->dma_addr, buffer->size); -+ if (ret < 0) { -+ /* FIXME: error handling */ -+ pr_err("failed to get scatterlist from DMA API\n"); -+ kfree(sgt); -+ ret = -ENOMEM; -+ goto error; -+ } -+ buffer->alloc.sg_table = sgt; - - fd = dma_buf_fd(dmabuf, O_CLOEXEC); - if (fd < 0) -@@ -1250,11 +1272,19 @@ int vc_sm_cma_ioctl_alloc(struct vc_sm_p - return 0; - - error: -- if (buffer) { -- pr_err("[%s]: something failed - cleanup. ret %d\n", __func__, -- ret); -+ pr_err("[%s]: something failed - cleanup. ret %d\n", __func__, ret); - -+ if (dmabuf) { -+ /* dmabuf has been exported, therefore allow dmabuf cleanup to -+ * deal with this -+ */ - dma_buf_put(dmabuf); -+ } else { -+ /* No dmabuf, therefore just free the buffer here */ -+ if (buffer->cookie) -+ dma_free_coherent(&sm_state->pdev->dev, buffer->size, -+ buffer->cookie, buffer->dma_addr); -+ kfree(buffer); - } - return ret; - } -@@ -1527,13 +1557,6 @@ static void vc_sm_connected_init(void) - - pr_info("[%s]: start\n", __func__); - -- vc_sm_cma_add_heaps(&sm_state->cma_heap); -- if (!sm_state->cma_heap) { -- pr_err("[%s]: failed to initialise CMA heap\n", -- __func__); -- return; -- } -- - /* - * Initialize and create a VCHI connection for the shared memory service - * running on videocore. ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.h -@@ -21,8 +21,6 @@ - #include - #include - --#include "vc_sm_cma.h" -- - #define VC_SM_MAX_NAME_LEN 32 - - enum vc_sm_vpu_mapping_state { -@@ -31,6 +29,12 @@ enum vc_sm_vpu_mapping_state { - VPU_UNMAPPING - }; - -+struct vc_sm_alloc_data { -+ unsigned long num_pages; -+ void *priv_virt; -+ struct sg_table *sg_table; -+}; -+ - struct vc_sm_imported { - struct dma_buf *dma_buf; - struct dma_buf_attachment *attach; -@@ -56,8 +60,6 @@ struct vc_sm_buffer { - int in_use:1; /* Kernel is still using this resource */ - int imported:1; /* Imported dmabuf */ - -- struct sg_table *sg_table; -- - enum vc_sm_vpu_mapping_state vpu_state; - u32 vc_handle; /* VideoCore handle for this buffer */ - int vpu_allocated; /* -@@ -69,11 +71,12 @@ struct vc_sm_buffer { - /* DMABUF related fields */ - struct dma_buf *dma_buf; - dma_addr_t dma_addr; -+ void *cookie; - - struct vc_sm_privdata_t *private; - - union { -- struct vc_sm_cma_alloc_data alloc; -+ struct vc_sm_alloc_data alloc; - struct vc_sm_imported import; - }; - }; ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.c -+++ /dev/null -@@ -1,98 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0 --/* -- * VideoCore Shared Memory CMA allocator -- * -- * Copyright: 2018, Raspberry Pi (Trading) Ltd -- * -- * Based on the Android ION allocator -- * Copyright (C) Linaro 2012 -- * Author: for ST-Ericsson. -- * -- */ -- --#include --#include --#include --#include --#include -- --#include "vc_sm_cma.h" -- --/* CMA heap operations functions */ --int vc_sm_cma_buffer_allocate(struct cma *cma_heap, -- struct vc_sm_cma_alloc_data *buffer, -- unsigned long len) --{ -- /* len should already be page aligned */ -- unsigned long num_pages = len / PAGE_SIZE; -- struct sg_table *table; -- struct page *pages; -- int ret; -- -- pages = cma_alloc(cma_heap, num_pages, 0, GFP_KERNEL); -- if (!pages) -- return -ENOMEM; -- -- table = kmalloc(sizeof(*table), GFP_KERNEL); -- if (!table) -- goto err; -- -- ret = sg_alloc_table(table, 1, GFP_KERNEL); -- if (ret) -- goto free_mem; -- -- sg_set_page(table->sgl, pages, len, 0); -- -- buffer->priv_virt = pages; -- buffer->sg_table = table; -- buffer->cma_heap = cma_heap; -- buffer->num_pages = num_pages; -- return 0; -- --free_mem: -- kfree(table); --err: -- cma_release(cma_heap, pages, num_pages); -- return -ENOMEM; --} -- --void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer) --{ -- struct cma *cma_heap = buffer->cma_heap; -- struct page *pages = buffer->priv_virt; -- -- /* release memory */ -- if (cma_heap) -- cma_release(cma_heap, pages, buffer->num_pages); -- -- /* release sg table */ -- if (buffer->sg_table) { -- sg_free_table(buffer->sg_table); -- kfree(buffer->sg_table); -- buffer->sg_table = NULL; -- } --} -- --int __vc_sm_cma_add_heaps(struct cma *cma, void *priv) --{ -- struct cma **heap = (struct cma **)priv; -- const char *name = cma_get_name(cma); -- -- if (!(*heap)) { -- phys_addr_t phys_addr = cma_get_base(cma); -- -- pr_debug("%s: Adding cma heap %s (start %pap, size %lu) for use by vcsm\n", -- __func__, name, &phys_addr, cma_get_size(cma)); -- *heap = cma; -- } else { -- pr_err("%s: Ignoring heap %s as already set\n", -- __func__, name); -- } -- -- return 0; --} -- --void vc_sm_cma_add_heaps(struct cma **cma_heap) --{ -- cma_for_each_area(__vc_sm_cma_add_heaps, cma_heap); --} ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma.h -+++ /dev/null -@@ -1,39 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ -- --/* -- * VideoCore Shared Memory CMA allocator -- * -- * Copyright: 2018, Raspberry Pi (Trading) Ltd -- * -- * Based on the Android ION allocator -- * Copyright (C) Linaro 2012 -- * Author: for ST-Ericsson. -- * -- * This software is licensed under the terms of the GNU General Public -- * License version 2, as published by the Free Software Foundation, and -- * may be copied, distributed, and modified under those terms. -- * -- * This program is distributed in the hope that it will be useful, -- * but WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- * GNU General Public License for more details. -- * -- */ --#ifndef VC_SM_CMA_H --#define VC_SM_CMA_H -- --struct vc_sm_cma_alloc_data { -- struct cma *cma_heap; -- unsigned long num_pages; -- void *priv_virt; -- struct sg_table *sg_table; --}; -- --int vc_sm_cma_buffer_allocate(struct cma *cma_heap, -- struct vc_sm_cma_alloc_data *buffer, -- unsigned long len); --void vc_sm_cma_buffer_free(struct vc_sm_cma_alloc_data *buffer); -- --void vc_sm_cma_add_heaps(struct cma **cma_heap); -- --#endif diff --git a/target/linux/brcm2708/patches-4.19/950-0685-staging-bcm2835-codec-Expand-logging-on-format-setti.patch b/target/linux/brcm2708/patches-4.19/950-0685-staging-bcm2835-codec-Expand-logging-on-format-setti.patch new file mode 100644 index 0000000000..f74fc4b730 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0685-staging-bcm2835-codec-Expand-logging-on-format-setti.patch @@ -0,0 +1,42 @@ +From 9a9ef8123467579c431ced1e98827364d66c615f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 11 Jul 2019 14:57:09 +0100 +Subject: [PATCH] staging:bcm2835-codec: Expand logging on format + setting + +Adds some more useful logging during format changed events and +s_fmt. + +Reported by: zillevdr +Signed-off-by: Dave Stevenson +--- + .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 10 +++++++--- + 1 file changed, 7 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -753,6 +753,10 @@ static void handle_fmt_changed(struct bc + format->es.video.color_space); + + q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Format was %ux%u, crop %ux%u\n", ++ __func__, q_data->bytesperline, q_data->height, ++ q_data->crop_width, q_data->crop_height); ++ + q_data->crop_width = format->es.video.crop.width; + q_data->crop_height = format->es.video.crop.height; + q_data->bytesperline = format->es.video.crop.width; +@@ -1110,10 +1114,10 @@ static int vidioc_s_fmt(struct bcm2835_c + bool update_capture_port = false; + int ret; + +- v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", ++ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: " V4L2_FOURCC_CONV ", size %u\n", + f->type, f->fmt.pix_mp.width, f->fmt.pix_mp.height, +- f->fmt.pix_mp.pixelformat, f->fmt.pix_mp.plane_fmt[0].sizeimage); +- ++ V4L2_FOURCC_CONV_ARGS(f->fmt.pix_mp.pixelformat), ++ f->fmt.pix_mp.plane_fmt[0].sizeimage); + + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); + if (!vq) diff --git a/target/linux/brcm2708/patches-4.19/950-0686-staging-bcm2835-codec-Correct-bytesperline-on-format.patch b/target/linux/brcm2708/patches-4.19/950-0686-staging-bcm2835-codec-Correct-bytesperline-on-format.patch new file mode 100644 index 0000000000..96f3351c04 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0686-staging-bcm2835-codec-Correct-bytesperline-on-format.patch @@ -0,0 +1,30 @@ +From bcb6e267ca61ce685ed2debc0cee327527cea20d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 11 Jul 2019 14:58:35 +0100 +Subject: [PATCH] staging: bcm2835-codec: Correct bytesperline on + format changed + +The handling of format changed events incorrectly set bytesperline +to the cropped width, which ignored padding and formats with +more than 8bpp. +Fix these. + +Reported by: zillevdr +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -759,7 +759,9 @@ static void handle_fmt_changed(struct bc + + q_data->crop_width = format->es.video.crop.width; + q_data->crop_height = format->es.video.crop.height; +- q_data->bytesperline = format->es.video.crop.width; ++ q_data->bytesperline = get_bytesperline(format->es.video.width, ++ q_data->fmt); ++ + q_data->height = format->es.video.height; + q_data->sizeimage = format->buffer_size_min; + if (format->es.video.color_space) diff --git a/target/linux/brcm2708/patches-4.19/950-0687-drm-vc4-Add-missing-NULL-check-to-vc4_crtc_consume_e.patch b/target/linux/brcm2708/patches-4.19/950-0687-drm-vc4-Add-missing-NULL-check-to-vc4_crtc_consume_e.patch new file mode 100644 index 0000000000..8a97747e17 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0687-drm-vc4-Add-missing-NULL-check-to-vc4_crtc_consume_e.patch @@ -0,0 +1,28 @@ +From cbe5c2a67fb145b210652be20a84690e09e4eb25 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 7 Aug 2019 11:31:08 +0100 +Subject: [PATCH] drm/vc4: Add missing NULL check to + vc4_crtc_consume_event + +vc4_crtc_consume_event wasn't checking crtc->state->event was +set before dereferencing it, leading to an OOPS. + +Fixes "a5b534b drm/vc4: Resolve the vblank warnings on mode switching" + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -969,6 +969,9 @@ static void vc4_crtc_consume_event(struc + struct drm_device *dev = crtc->dev; + unsigned long flags; + ++ if (!crtc->state->event) ++ return; ++ + crtc->state->event->pipe = drm_crtc_index(crtc); + + WARN_ON(drm_crtc_vblank_get(crtc) != 0); diff --git a/target/linux/brcm2708/patches-4.19/950-0687-staging-vc-sm-cma-Fix-the-few-remaining-coding-style.patch b/target/linux/brcm2708/patches-4.19/950-0687-staging-vc-sm-cma-Fix-the-few-remaining-coding-style.patch deleted file mode 100644 index 1f2878eaf6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0687-staging-vc-sm-cma-Fix-the-few-remaining-coding-style.patch +++ /dev/null @@ -1,188 +0,0 @@ -From 38ae4957840ff9578a497422a8ca758549f734d5 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 2 Jul 2019 17:19:04 +0100 -Subject: [PATCH 687/806] staging: vc-sm-cma: Fix the few remaining coding - style issues - -Fix a few minor checkpatch complaints to make the driver clean - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/vc-sm-cma/vc_sm.c | 6 +- - .../vc04_services/vc-sm-cma/vc_sm_cma_vchi.c | 128 +++++++++--------- - 2 files changed, 65 insertions(+), 69 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -325,7 +325,6 @@ static void vc_sm_release_resource(struc - buffer->cookie, buffer->dma_addr); - } - -- - /* Free our buffer. Start by removing it from the list */ - mutex_lock(&sm_state->map_lock); - list_del(&buffer->global_buffer_list); -@@ -1365,7 +1364,8 @@ static int vc_sm_cma_clean_invalid2(unsi - } - - for (i = 0; i < ioparam.op_count; i++) { -- const struct vc_sm_cma_ioctl_clean_invalid_block * const op = block + i; -+ const struct vc_sm_cma_ioctl_clean_invalid_block * const op = -+ block + i; - - if (op->invalidate_mode == VC_SM_CACHE_OP_NOP) - continue; -@@ -1637,8 +1637,6 @@ err_remove_misc_dev: - err_remove_debugfs: - debugfs_remove_recursive(sm_state->dir_root); - vc_sm_cma_vchi_stop(&sm_state->sm_handle); -- -- return; - } - - /* Driver loading. */ ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm_cma_vchi.c -@@ -188,79 +188,77 @@ static int vc_sm_cma_vchi_videocore_io(v - if (svc_use) - vchi_service_release(instance->vchi_handle[0]); - svc_use = 0; -- if (!wait_for_completion_interruptible(&instance->io_cmplt)) { -- vchi_service_use(instance->vchi_handle[0]); -- svc_use = 1; -- -- do { -- /* -- * Get new command and move it to response list -- */ -- mutex_lock(&instance->lock); -- if (list_empty(&instance->cmd_list)) { -- /* no more commands to process */ -- mutex_unlock(&instance->lock); -- break; -- } -- cmd = -- list_first_entry(&instance->cmd_list, -- struct sm_cmd_rsp_blk, -- head); -- list_move(&cmd->head, &instance->rsp_list); -- cmd->sent = 1; -- mutex_unlock(&instance->lock); - -- /* Send the command */ -- status = bcm2835_vchi_msg_queue( -- instance->vchi_handle[0], -- cmd->msg, cmd->length); -- if (status) { -- pr_err("%s: failed to queue message (%d)", -- __func__, status); -- } -- -- /* If no reply is needed then we're done */ -- if (!cmd->wait) { -- mutex_lock(&instance->lock); -- list_del(&cmd->head); -- mutex_unlock(&instance->lock); -- vc_vchi_cmd_delete(instance, cmd); -- continue; -- } -- -- if (status) { -- complete(&cmd->cmplt); -- continue; -- } -- -- } while (1); -- -- while (!vchi_msg_peek(instance->vchi_handle[0], -- (void **)&reply, &reply_len, -- VCHI_FLAGS_NONE)) { -- if (reply->trans_id & 0x80000000) { -- /* Async event or cmd from the VPU */ -- if (instance->vpu_event) -- instance->vpu_event( -- instance, reply, -- reply_len); -- } else { -- vc_sm_cma_vchi_rx_ack(instance, cmd, -- reply, reply_len); -- } -+ if (wait_for_completion_interruptible(&instance->io_cmplt)) -+ continue; - -- vchi_msg_remove(instance->vchi_handle[0]); -- } -+ vchi_service_use(instance->vchi_handle[0]); -+ svc_use = 1; - -- /* Go through the dead list and free them */ -+ do { -+ /* -+ * Get new command and move it to response list -+ */ - mutex_lock(&instance->lock); -- list_for_each_entry_safe(cmd, cmd_tmp, -- &instance->dead_list, head) { -+ if (list_empty(&instance->cmd_list)) { -+ /* no more commands to process */ -+ mutex_unlock(&instance->lock); -+ break; -+ } -+ cmd = list_first_entry(&instance->cmd_list, -+ struct sm_cmd_rsp_blk, head); -+ list_move(&cmd->head, &instance->rsp_list); -+ cmd->sent = 1; -+ mutex_unlock(&instance->lock); -+ -+ /* Send the command */ -+ status = -+ bcm2835_vchi_msg_queue(instance->vchi_handle[0], -+ cmd->msg, cmd->length); -+ if (status) { -+ pr_err("%s: failed to queue message (%d)", -+ __func__, status); -+ } -+ -+ /* If no reply is needed then we're done */ -+ if (!cmd->wait) { -+ mutex_lock(&instance->lock); - list_del(&cmd->head); -+ mutex_unlock(&instance->lock); - vc_vchi_cmd_delete(instance, cmd); -+ continue; - } -- mutex_unlock(&instance->lock); -+ -+ if (status) { -+ complete(&cmd->cmplt); -+ continue; -+ } -+ -+ } while (1); -+ -+ while (!vchi_msg_peek(instance->vchi_handle[0], (void **)&reply, -+ &reply_len, VCHI_FLAGS_NONE)) { -+ if (reply->trans_id & 0x80000000) { -+ /* Async event or cmd from the VPU */ -+ if (instance->vpu_event) -+ instance->vpu_event(instance, reply, -+ reply_len); -+ } else { -+ vc_sm_cma_vchi_rx_ack(instance, cmd, reply, -+ reply_len); -+ } -+ -+ vchi_msg_remove(instance->vchi_handle[0]); -+ } -+ -+ /* Go through the dead list and free them */ -+ mutex_lock(&instance->lock); -+ list_for_each_entry_safe(cmd, cmd_tmp, &instance->dead_list, -+ head) { -+ list_del(&cmd->head); -+ vc_vchi_cmd_delete(instance, cmd); - } -+ mutex_unlock(&instance->lock); - } - - return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0688-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch b/target/linux/brcm2708/patches-4.19/950-0688-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch new file mode 100644 index 0000000000..beeeb2f9f1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0688-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch @@ -0,0 +1,52 @@ +From 103afc4641ab8d6587e981a5e3fda27427a8bf4b Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 9 Aug 2019 08:51:43 +0100 +Subject: [PATCH] net: bcmgenet: Workaround #2 for Pi4 Ethernet fail + +Some combinations of Pi 4Bs and Ethernet switches don't reliably get a +DCHP-assigned IP address, leaving the unit with a self=assigned 169.254 +address. In the failure case, the Pi is left able to receive packets +but not send them, suggesting that the MAC<->PHY link is getting into +a bad state. + +It has been found empirically that skipping a reset step by the genet +driver prevents the failures. No downsides have been discovered yet, +and unlike the forced renegotiation it doesn't increase the time to +get an IP address, so the workaround is enabled by default; add + + genet.skip_umac_reset=n + +to the command line to disable it. + +See: https://github.com/raspberrypi/linux/issues/3108 + +Signed-off-by: Phil Elwell +--- + drivers/net/ethernet/broadcom/genet/bcmgenet.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c ++++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c +@@ -72,6 +72,10 @@ + #define GENET_RDMA_REG_OFF (priv->hw_params->rdma_offset + \ + TOTAL_DESC * DMA_DESC_SIZE) + ++static bool skip_umac_reset = true; ++module_param(skip_umac_reset, bool, 0444); ++MODULE_PARM_DESC(skip_umac_reset, "Skip UMAC reset step"); ++ + static inline void bcmgenet_writel(u32 value, void __iomem *offset) + { + /* MIPS chips strapped for BE will automagically configure the +@@ -1993,6 +1997,11 @@ static void reset_umac(struct bcmgenet_p + bcmgenet_rbuf_ctrl_set(priv, 0); + udelay(10); + ++ if (skip_umac_reset) { ++ pr_warn("Skipping UMAC reset\n"); ++ return; ++ } ++ + /* disable MAC while updating its registers */ + bcmgenet_umac_writel(priv, 0, UMAC_CMD); + diff --git a/target/linux/brcm2708/patches-4.19/950-0689-Revert-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-bu.patch b/target/linux/brcm2708/patches-4.19/950-0689-Revert-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-bu.patch deleted file mode 100644 index 4c05cc3978..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0689-Revert-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-bu.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 768ab361410487b05561de854a994a2888cd430a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 28 Jun 2019 11:30:49 +0100 -Subject: [PATCH 689/806] Revert "media: vb2: Allow reqbufs(0) with "in use" - MMAP buffers" - -This reverts commit a2c73e18c1f657de6d654f51effa0a94863abbd8. -An alternative version was accepted upstream. Revert this patch to -apply that one. - -Signed-off-by: Dave Stevenson ---- - .../media/common/videobuf2/videobuf2-core.c | 23 +++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/drivers/media/common/videobuf2/videobuf2-core.c -+++ b/drivers/media/common/videobuf2/videobuf2-core.c -@@ -554,6 +554,20 @@ bool vb2_buffer_in_use(struct vb2_queue - } - EXPORT_SYMBOL(vb2_buffer_in_use); - -+/* -+ * __buffers_in_use() - return true if any buffers on the queue are in use and -+ * the queue cannot be freed (by the means of REQBUFS(0)) call -+ */ -+static bool __buffers_in_use(struct vb2_queue *q) -+{ -+ unsigned int buffer; -+ for (buffer = 0; buffer < q->num_buffers; ++buffer) { -+ if (vb2_buffer_in_use(q, q->bufs[buffer])) -+ return true; -+ } -+ return false; -+} -+ - void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb) - { - call_void_bufop(q, fill_user_buffer, q->bufs[index], pb); -@@ -665,7 +679,16 @@ int vb2_core_reqbufs(struct vb2_queue *q - - if (*count == 0 || q->num_buffers != 0 || - (q->memory != VB2_MEMORY_UNKNOWN && q->memory != memory)) { -+ /* -+ * We already have buffers allocated, so first check if they -+ * are not in use and can be freed. -+ */ - mutex_lock(&q->mmap_lock); -+ if (q->memory == VB2_MEMORY_MMAP && __buffers_in_use(q)) { -+ mutex_unlock(&q->mmap_lock); -+ dprintk(1, "memory in use, cannot free\n"); -+ return -EBUSY; -+ } - - /* - * Call queue_cancel to clean up any buffers in the PREPARED or diff --git a/target/linux/brcm2708/patches-4.19/950-0689-drm-vc4-Fix-TILE_Y_OFFSET-definitions.patch b/target/linux/brcm2708/patches-4.19/950-0689-drm-vc4-Fix-TILE_Y_OFFSET-definitions.patch new file mode 100644 index 0000000000..bffed9e856 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0689-drm-vc4-Fix-TILE_Y_OFFSET-definitions.patch @@ -0,0 +1,27 @@ +From c1fffc2a7dbf7e59aaef36378fb14d1c3dc016a6 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 3 Aug 2018 11:22:27 +0200 +Subject: [PATCH] drm/vc4: Fix TILE_Y_OFFSET definitions + +Y_OFFSET field starts at bit 8 not 7. + +Signed-off-by: Eric Anholt +Signed-off-by: Boris Brezillon +Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-1-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/vc4/vc4_regs.h | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -1043,8 +1043,8 @@ enum hvs_pixel_format { + #define SCALER_PITCH0_TILE_LINE_DIR BIT(15) + #define SCALER_PITCH0_TILE_INITIAL_LINE_DIR BIT(14) + /* Y offset within a tile. */ +-#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 7) +-#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 7 ++#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 8) ++#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 8 + #define SCALER_PITCH0_TILE_WIDTH_R_MASK VC4_MASK(6, 0) + #define SCALER_PITCH0_TILE_WIDTH_R_SHIFT 0 + diff --git a/target/linux/brcm2708/patches-4.19/950-0690-drm-vc4-Define-missing-PITCH0_SINK_PIX-field.patch b/target/linux/brcm2708/patches-4.19/950-0690-drm-vc4-Define-missing-PITCH0_SINK_PIX-field.patch new file mode 100644 index 0000000000..b1be6322f1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0690-drm-vc4-Define-missing-PITCH0_SINK_PIX-field.patch @@ -0,0 +1,28 @@ +From d0b90f9c68a96f2bee66d796cb33367d205e586a Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 3 Aug 2018 11:22:28 +0200 +Subject: [PATCH] drm/vc4: Define missing PITCH0_SINK_PIX field + +This is needed to support X/Y negative placement of planes using +T-format buffers. + +Signed-off-by: Eric Anholt +Signed-off-by: Boris Brezillon +Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-2-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/vc4/vc4_regs.h | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -1037,6 +1037,10 @@ enum hvs_pixel_format { + #define SCALER_TILE_HEIGHT_MASK VC4_MASK(15, 0) + #define SCALER_TILE_HEIGHT_SHIFT 0 + ++/* Common PITCH0 fields */ ++#define SCALER_PITCH0_SINK_PIX_MASK VC4_MASK(31, 26) ++#define SCALER_PITCH0_SINK_PIX_SHIFT 26 ++ + /* PITCH0 fields for T-tiled. */ + #define SCALER_PITCH0_TILE_WIDTH_L_MASK VC4_MASK(22, 16) + #define SCALER_PITCH0_TILE_WIDTH_L_SHIFT 16 diff --git a/target/linux/brcm2708/patches-4.19/950-0690-media-videodev2.h-add-new-capabilities-for-buffer-ty.patch b/target/linux/brcm2708/patches-4.19/950-0690-media-videodev2.h-add-new-capabilities-for-buffer-ty.patch deleted file mode 100644 index ffe6237bce..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0690-media-videodev2.h-add-new-capabilities-for-buffer-ty.patch +++ /dev/null @@ -1,136 +0,0 @@ -From ebd995296afa99a5c53f164e595f7a6d41d32a01 Mon Sep 17 00:00:00 2001 -From: Hans Verkuil -Date: Thu, 23 Aug 2018 09:56:22 -0400 -Subject: [PATCH 690/806] media: videodev2.h: add new capabilities for buffer - types - -Upstream commit f35f5d72e70e6b91389eb98fcabf43b79f40587f - -VIDIOC_REQBUFS and VIDIOC_CREATE_BUFFERS will return capabilities -telling userspace what the given buffer type is capable of. - -Signed-off-by: Hans Verkuil -Reviewed-by: Tomasz Figa -Acked-by: Sakari Ailus -Signed-off-by: Mauro Carvalho Chehab ---- - .../media/uapi/v4l/vidioc-create-bufs.rst | 14 ++++++- - .../media/uapi/v4l/vidioc-reqbufs.rst | 42 ++++++++++++++++++- - include/uapi/linux/videodev2.h | 13 +++++- - 3 files changed, 65 insertions(+), 4 deletions(-) - ---- a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst -+++ b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst -@@ -102,7 +102,19 @@ than the number requested. - - ``format`` - - Filled in by the application, preserved by the driver. - * - __u32 -- - ``reserved``\ [8] -+ - ``capabilities`` -+ - Set by the driver. If 0, then the driver doesn't support -+ capabilities. In that case all you know is that the driver is -+ guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support -+ other :c:type:`v4l2_memory` types. It will not support any others -+ capabilities. See :ref:`here ` for a list of the -+ capabilities. -+ -+ If you want to just query the capabilities without making any -+ other changes, then set ``count`` to 0, ``memory`` to -+ ``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type. -+ * - __u32 -+ - ``reserved``\ [7] - - A place holder for future extensions. Drivers and applications - must set the array to zero. - ---- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst -+++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst -@@ -88,10 +88,50 @@ any DMA in progress, an implicit - ``V4L2_MEMORY_DMABUF`` or ``V4L2_MEMORY_USERPTR``. See - :c:type:`v4l2_memory`. - * - __u32 -- - ``reserved``\ [2] -+ - ``capabilities`` -+ - Set by the driver. If 0, then the driver doesn't support -+ capabilities. In that case all you know is that the driver is -+ guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support -+ other :c:type:`v4l2_memory` types. It will not support any others -+ capabilities. -+ -+ If you want to query the capabilities with a minimum of side-effects, -+ then this can be called with ``count`` set to 0, ``memory`` set to -+ ``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will -+ free any previously allocated buffers, so this is typically something -+ that will be done at the start of the application. -+ * - __u32 -+ - ``reserved``\ [1] - - A place holder for future extensions. Drivers and applications - must set the array to zero. - -+.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}| -+ -+.. _v4l2-buf-capabilities: -+.. _V4L2-BUF-CAP-SUPPORTS-MMAP: -+.. _V4L2-BUF-CAP-SUPPORTS-USERPTR: -+.. _V4L2-BUF-CAP-SUPPORTS-DMABUF: -+.. _V4L2-BUF-CAP-SUPPORTS-REQUESTS: -+ -+.. cssclass:: longtable -+ -+.. flat-table:: V4L2 Buffer Capabilities Flags -+ :header-rows: 0 -+ :stub-columns: 0 -+ :widths: 3 1 4 -+ -+ * - ``V4L2_BUF_CAP_SUPPORTS_MMAP`` -+ - 0x00000001 -+ - This buffer type supports the ``V4L2_MEMORY_MMAP`` streaming mode. -+ * - ``V4L2_BUF_CAP_SUPPORTS_USERPTR`` -+ - 0x00000002 -+ - This buffer type supports the ``V4L2_MEMORY_USERPTR`` streaming mode. -+ * - ``V4L2_BUF_CAP_SUPPORTS_DMABUF`` -+ - 0x00000004 -+ - This buffer type supports the ``V4L2_MEMORY_DMABUF`` streaming mode. -+ * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS`` -+ - 0x00000008 -+ - This buffer type supports :ref:`requests `. - - Return Value - ============ ---- a/include/uapi/linux/videodev2.h -+++ b/include/uapi/linux/videodev2.h -@@ -872,9 +872,16 @@ struct v4l2_requestbuffers { - __u32 count; - __u32 type; /* enum v4l2_buf_type */ - __u32 memory; /* enum v4l2_memory */ -- __u32 reserved[2]; -+ __u32 capabilities; -+ __u32 reserved[1]; - }; - -+/* capabilities for struct v4l2_requestbuffers and v4l2_create_buffers */ -+#define V4L2_BUF_CAP_SUPPORTS_MMAP (1 << 0) -+#define V4L2_BUF_CAP_SUPPORTS_USERPTR (1 << 1) -+#define V4L2_BUF_CAP_SUPPORTS_DMABUF (1 << 2) -+#define V4L2_BUF_CAP_SUPPORTS_REQUESTS (1 << 3) -+ - /** - * struct v4l2_plane - plane info for multi-planar buffers - * @bytesused: number of bytes occupied by data in the plane (payload) -@@ -2318,6 +2325,7 @@ struct v4l2_dbg_chip_info { - * return: number of created buffers - * @memory: enum v4l2_memory; buffer memory type - * @format: frame format, for which buffers are requested -+ * @capabilities: capabilities of this buffer type. - * @reserved: future extensions - */ - struct v4l2_create_buffers { -@@ -2325,7 +2333,8 @@ struct v4l2_create_buffers { - __u32 count; - __u32 memory; - struct v4l2_format format; -- __u32 reserved[8]; -+ __u32 capabilities; -+ __u32 reserved[7]; - }; - - /* diff --git a/target/linux/brcm2708/patches-4.19/950-0691-drm-vc4-Use-drm_atomic_helper_check_plane_state-to-s.patch b/target/linux/brcm2708/patches-4.19/950-0691-drm-vc4-Use-drm_atomic_helper_check_plane_state-to-s.patch new file mode 100644 index 0000000000..3ead02cbbf --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0691-drm-vc4-Use-drm_atomic_helper_check_plane_state-to-s.patch @@ -0,0 +1,157 @@ +From 2a98dc34696c6510a49a684eb56d3a9c2a150571 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 3 Aug 2018 11:22:29 +0200 +Subject: [PATCH] drm/vc4: Use drm_atomic_helper_check_plane_state() to + simplify the logic + +drm_atomic_helper_check_plane_state() takes care of checking the +scaling capabilities and calculating the clipped X/Y offsets for us. + +Rely on this function instead of open-coding the logic. + +Incidentally, it seems to fix a problem we had with negative X/Y +positioning of YUV planes. + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-3-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/vc4/vc4_plane.c | 103 ++++++++++++++++---------------- + 1 file changed, 52 insertions(+), 51 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -313,31 +313,59 @@ static int vc4_plane_setup_clipping_and_ + u32 subpixel_src_mask = (1 << 16) - 1; + u32 format = fb->format->format; + int num_planes = fb->format->num_planes; +- u32 h_subsample = 1; +- u32 v_subsample = 1; +- int ret; +- int i; ++ int min_scale = 1, max_scale = INT_MAX; ++ struct drm_crtc_state *crtc_state; ++ u32 h_subsample, v_subsample; ++ int i, ret; ++ ++ crtc_state = drm_atomic_get_existing_crtc_state(state->state, ++ state->crtc); ++ if (!crtc_state) { ++ DRM_DEBUG_KMS("Invalid crtc state\n"); ++ return -EINVAL; ++ } ++ ++ /* No configuring scaling on the cursor plane, since it gets ++ * non-vblank-synced updates, and scaling requires LBM changes which ++ * have to be vblank-synced. ++ */ ++ if (plane->type == DRM_PLANE_TYPE_CURSOR) { ++ min_scale = DRM_PLANE_HELPER_NO_SCALING; ++ max_scale = DRM_PLANE_HELPER_NO_SCALING; ++ } else { ++ min_scale = 1; ++ max_scale = INT_MAX; ++ } ++ ++ ret = drm_atomic_helper_check_plane_state(state, crtc_state, ++ min_scale, max_scale, ++ true, true); ++ if (ret) ++ return ret; ++ ++ h_subsample = drm_format_horz_chroma_subsampling(format); ++ v_subsample = drm_format_vert_chroma_subsampling(format); + + for (i = 0; i < num_planes; i++) + vc4_state->offsets[i] = bo->paddr + fb->offsets[i]; + + /* We don't support subpixel source positioning for scaling. */ +- if ((state->src_x & subpixel_src_mask) || +- (state->src_y & subpixel_src_mask) || +- (state->src_w & subpixel_src_mask) || +- (state->src_h & subpixel_src_mask)) { ++ if ((state->src.x1 & subpixel_src_mask) || ++ (state->src.x2 & subpixel_src_mask) || ++ (state->src.y1 & subpixel_src_mask) || ++ (state->src.y2 & subpixel_src_mask)) { + return -EINVAL; + } + +- vc4_state->src_x = state->src_x >> 16; +- vc4_state->src_y = state->src_y >> 16; +- vc4_state->src_w[0] = state->src_w >> 16; +- vc4_state->src_h[0] = state->src_h >> 16; +- +- vc4_state->crtc_x = state->crtc_x; +- vc4_state->crtc_y = state->crtc_y; +- vc4_state->crtc_w = state->crtc_w; +- vc4_state->crtc_h = state->crtc_h; ++ vc4_state->src_x = state->src.x1 >> 16; ++ vc4_state->src_y = state->src.y1 >> 16; ++ vc4_state->src_w[0] = (state->src.x2 - state->src.x1) >> 16; ++ vc4_state->src_h[0] = (state->src.y2 - state->src.y1) >> 16; ++ ++ vc4_state->crtc_x = state->dst.x1; ++ vc4_state->crtc_y = state->dst.y1; ++ vc4_state->crtc_w = state->dst.x2 - state->dst.x1; ++ vc4_state->crtc_h = state->dst.y2 - state->dst.y1; + + ret = vc4_plane_margins_adj(state); + if (ret) +@@ -354,8 +382,6 @@ static int vc4_plane_setup_clipping_and_ + if (num_planes > 1) { + vc4_state->is_yuv = true; + +- h_subsample = drm_format_horz_chroma_subsampling(format); +- v_subsample = drm_format_vert_chroma_subsampling(format); + vc4_state->src_w[1] = vc4_state->src_w[0] / h_subsample; + vc4_state->src_h[1] = vc4_state->src_h[0] / v_subsample; + +@@ -380,39 +406,14 @@ static int vc4_plane_setup_clipping_and_ + vc4_state->y_scaling[1] = VC4_SCALING_NONE; + } + +- /* No configuring scaling on the cursor plane, since it gets +- non-vblank-synced updates, and scaling requires requires +- LBM changes which have to be vblank-synced. +- */ +- if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity) +- return -EINVAL; +- +- /* Clamp the on-screen start x/y to 0. The hardware doesn't +- * support negative y, and negative x wastes bandwidth. +- */ +- if (vc4_state->crtc_x < 0) { +- for (i = 0; i < num_planes; i++) { +- u32 cpp = fb->format->cpp[i]; +- u32 subs = ((i == 0) ? 1 : h_subsample); +- +- vc4_state->offsets[i] += (cpp * +- (-vc4_state->crtc_x) / subs); +- } +- vc4_state->src_w[0] += vc4_state->crtc_x; +- vc4_state->src_w[1] += vc4_state->crtc_x / h_subsample; +- vc4_state->crtc_x = 0; +- } +- +- if (vc4_state->crtc_y < 0) { +- for (i = 0; i < num_planes; i++) { +- u32 subs = ((i == 0) ? 1 : v_subsample); +- +- vc4_state->offsets[i] += (fb->pitches[i] * +- (-vc4_state->crtc_y) / subs); +- } +- vc4_state->src_h[0] += vc4_state->crtc_y; +- vc4_state->src_h[1] += vc4_state->crtc_y / v_subsample; +- vc4_state->crtc_y = 0; ++ /* Adjust the base pointer to the first pixel to be scanned out. */ ++ for (i = 0; i < num_planes; i++) { ++ vc4_state->offsets[i] += (vc4_state->src_y / ++ (i ? v_subsample : 1)) * ++ fb->pitches[i]; ++ vc4_state->offsets[i] += (vc4_state->src_x / ++ (i ? h_subsample : 1)) * ++ fb->format->cpp[i]; + } + + return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0691-media-vb2-set-reqbufs-create_bufs-capabilities.patch b/target/linux/brcm2708/patches-4.19/950-0691-media-vb2-set-reqbufs-create_bufs-capabilities.patch deleted file mode 100644 index 233857f5d1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0691-media-vb2-set-reqbufs-create_bufs-capabilities.patch +++ /dev/null @@ -1,190 +0,0 @@ -From 7410e35a4936b89f2e227c52058c11f1574bbfca Mon Sep 17 00:00:00 2001 -From: Hans Verkuil -Date: Thu, 23 Aug 2018 10:18:35 -0400 -Subject: [PATCH 691/806] media: vb2: set reqbufs/create_bufs capabilities - -Upstream commit e5079cf11373e4cc98be8b1072aece429eb2d4d2. - -Set the capabilities field of v4l2_requestbuffers and v4l2_create_buffers. - -The various mapping modes were easy, but for signaling the request capability -a new 'supports_requests' bitfield was added to videobuf2-core.h (and set in -vim2m and vivid). Drivers have to set this bitfield for any queue where -requests are supported. - -Signed-off-by: Hans Verkuil -Reviewed-by: Tomasz Figa -Acked-by: Sakari Ailus -Signed-off-by: Mauro Carvalho Chehab - -Minor modifications required on the backport ---- - drivers/media/common/videobuf2/videobuf2-v4l2.c | 17 +++++++++++++++++ - drivers/media/platform/vim2m.c | 1 + - drivers/media/platform/vivid/vivid-core.c | 5 +++++ - drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 4 +++- - drivers/media/v4l2-core/v4l2-ioctl.c | 4 ++-- - include/media/videobuf2-core.h | 2 ++ - 6 files changed, 30 insertions(+), 3 deletions(-) - ---- a/drivers/media/common/videobuf2/videobuf2-v4l2.c -+++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c -@@ -482,10 +482,24 @@ int vb2_querybuf(struct vb2_queue *q, st - } - EXPORT_SYMBOL(vb2_querybuf); - -+static void fill_buf_caps(struct vb2_queue *q, u32 *caps) -+{ -+ *caps = 0; -+ if (q->io_modes & VB2_MMAP) -+ *caps |= V4L2_BUF_CAP_SUPPORTS_MMAP; -+ if (q->io_modes & VB2_USERPTR) -+ *caps |= V4L2_BUF_CAP_SUPPORTS_USERPTR; -+ if (q->io_modes & VB2_DMABUF) -+ *caps |= V4L2_BUF_CAP_SUPPORTS_DMABUF; -+ if (q->supports_requests) -+ *caps |= V4L2_BUF_CAP_SUPPORTS_REQUESTS; -+} -+ - int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) - { - int ret = vb2_verify_memory_type(q, req->memory, req->type); - -+ fill_buf_caps(q, &req->capabilities); - return ret ? ret : vb2_core_reqbufs(q, req->memory, &req->count); - } - EXPORT_SYMBOL_GPL(vb2_reqbufs); -@@ -513,6 +527,7 @@ int vb2_create_bufs(struct vb2_queue *q, - int ret = vb2_verify_memory_type(q, create->memory, f->type); - unsigned i; - -+ fill_buf_caps(q, &create->capabilities); - create->index = q->num_buffers; - if (create->count == 0) - return ret != -EBUSY ? ret : 0; -@@ -713,6 +728,7 @@ int vb2_ioctl_reqbufs(struct file *file, - struct video_device *vdev = video_devdata(file); - int res = vb2_verify_memory_type(vdev->queue, p->memory, p->type); - -+ fill_buf_caps(vdev->queue, &p->capabilities); - if (res) - return res; - if (vb2_queue_is_busy(vdev, file)) -@@ -734,6 +750,7 @@ int vb2_ioctl_create_bufs(struct file *f - p->format.type); - - p->index = vdev->queue->num_buffers; -+ fill_buf_caps(vdev->queue, &p->capabilities); - /* - * If count == 0, then just check if memory and type are valid. - * Any -EBUSY result from vb2_verify_memory_type can be mapped to 0. ---- a/drivers/media/platform/vim2m.c -+++ b/drivers/media/platform/vim2m.c -@@ -840,6 +840,7 @@ static int queue_init(void *priv, struct - src_vq->mem_ops = &vb2_vmalloc_memops; - src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; - src_vq->lock = &ctx->dev->dev_mutex; -+ src_vq->supports_requests = true; - - ret = vb2_queue_init(src_vq); - if (ret) ---- a/drivers/media/platform/vivid/vivid-core.c -+++ b/drivers/media/platform/vivid/vivid-core.c -@@ -1060,6 +1060,7 @@ static int vivid_create_instance(struct - q->min_buffers_needed = 2; - q->lock = &dev->mutex; - q->dev = dev->v4l2_dev.dev; -+ q->supports_requests = true; - - ret = vb2_queue_init(q); - if (ret) -@@ -1080,6 +1081,7 @@ static int vivid_create_instance(struct - q->min_buffers_needed = 2; - q->lock = &dev->mutex; - q->dev = dev->v4l2_dev.dev; -+ q->supports_requests = true; - - ret = vb2_queue_init(q); - if (ret) -@@ -1100,6 +1102,7 @@ static int vivid_create_instance(struct - q->min_buffers_needed = 2; - q->lock = &dev->mutex; - q->dev = dev->v4l2_dev.dev; -+ q->supports_requests = true; - - ret = vb2_queue_init(q); - if (ret) -@@ -1120,6 +1123,7 @@ static int vivid_create_instance(struct - q->min_buffers_needed = 2; - q->lock = &dev->mutex; - q->dev = dev->v4l2_dev.dev; -+ q->supports_requests = true; - - ret = vb2_queue_init(q); - if (ret) -@@ -1139,6 +1143,7 @@ static int vivid_create_instance(struct - q->min_buffers_needed = 8; - q->lock = &dev->mutex; - q->dev = dev->v4l2_dev.dev; -+ q->supports_requests = true; - - ret = vb2_queue_init(q); - if (ret) ---- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c -+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c -@@ -251,7 +251,8 @@ struct v4l2_create_buffers32 { - __u32 count; - __u32 memory; /* enum v4l2_memory */ - struct v4l2_format32 format; -- __u32 reserved[8]; -+ __u32 capabilities; -+ __u32 reserved[7]; - }; - - static int __bufsize_v4l2_format(struct v4l2_format32 __user *p32, u32 *size) -@@ -411,6 +412,7 @@ static int put_v4l2_create32(struct v4l2 - if (!access_ok(VERIFY_WRITE, p32, sizeof(*p32)) || - copy_in_user(p32, p64, - offsetof(struct v4l2_create_buffers32, format)) || -+ assign_in_user(&p32->capabilities, &p64->capabilities) || - copy_in_user(p32->reserved, p64->reserved, sizeof(p64->reserved))) - return -EFAULT; - return __put_v4l2_format32(&p64->format, &p32->format); ---- a/drivers/media/v4l2-core/v4l2-ioctl.c -+++ b/drivers/media/v4l2-core/v4l2-ioctl.c -@@ -1879,7 +1879,7 @@ static int v4l_reqbufs(const struct v4l2 - if (ret) - return ret; - -- CLEAR_AFTER_FIELD(p, memory); -+ CLEAR_AFTER_FIELD(p, capabilities); - - return ops->vidioc_reqbufs(file, fh, p); - } -@@ -1920,7 +1920,7 @@ static int v4l_create_bufs(const struct - if (ret) - return ret; - -- CLEAR_AFTER_FIELD(create, format); -+ CLEAR_AFTER_FIELD(create, capabilities); - - v4l_sanitize_format(&create->format); - ---- a/include/media/videobuf2-core.h -+++ b/include/media/videobuf2-core.h -@@ -449,6 +449,7 @@ struct vb2_buf_ops { - * @quirk_poll_must_check_waiting_for_buffers: Return %EPOLLERR at poll when QBUF - * has not been called. This is a vb1 idiom that has been adopted - * also by vb2. -+ * @supports_requests: this queue supports the Request API. - * @lock: pointer to a mutex that protects the &struct vb2_queue. The - * driver can set this to a mutex to let the v4l2 core serialize - * the queuing ioctls. If the driver wants to handle locking -@@ -516,6 +517,7 @@ struct vb2_queue { - unsigned fileio_write_immediately:1; - unsigned allow_zero_bytesused:1; - unsigned quirk_poll_must_check_waiting_for_buffers:1; -+ unsigned supports_requests:1; - - struct mutex *lock; - void *owner; diff --git a/target/linux/brcm2708/patches-4.19/950-0692-drm-vc4-Move-offsets-adjustment-out-of-setup_clippin.patch b/target/linux/brcm2708/patches-4.19/950-0692-drm-vc4-Move-offsets-adjustment-out-of-setup_clippin.patch new file mode 100644 index 0000000000..9820c91d60 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0692-drm-vc4-Move-offsets-adjustment-out-of-setup_clippin.patch @@ -0,0 +1,73 @@ +From 58a92eae6ed463c294381e72eefec701d23fcdaf Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 3 Aug 2018 11:22:30 +0200 +Subject: [PATCH] adjustment out of + setup_clipping_and_scaling() + +The offset adjustment depends on the framebuffer modified, so let's +just move this operation in the DRM_FORMAT_MOD_LINEAR case inside +vc4_plane_mode_set(). + +This we'll be able to fix offset calculation for +DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED and DRM_FORMAT_MOD_BROADCOM_SANDXXX. + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-4-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/vc4/vc4_plane.c | 26 ++++++++++++++++---------- + 1 file changed, 16 insertions(+), 10 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -406,16 +406,6 @@ static int vc4_plane_setup_clipping_and_ + vc4_state->y_scaling[1] = VC4_SCALING_NONE; + } + +- /* Adjust the base pointer to the first pixel to be scanned out. */ +- for (i = 0; i < num_planes; i++) { +- vc4_state->offsets[i] += (vc4_state->src_y / +- (i ? v_subsample : 1)) * +- fb->pitches[i]; +- vc4_state->offsets[i] += (vc4_state->src_x / +- (i ? h_subsample : 1)) * +- fb->format->cpp[i]; +- } +- + return 0; + } + +@@ -523,6 +513,7 @@ static int vc4_plane_mode_set(struct drm + const struct hvs_format *format = vc4_get_hvs_format(fb->format->format); + u64 base_format_mod = fourcc_mod_broadcom_mod(fb->modifier); + int num_planes = drm_format_num_planes(format->drm); ++ u32 h_subsample, v_subsample; + bool mix_plane_alpha; + bool covers_screen; + u32 scl0, scl1, pitch0; +@@ -568,10 +559,25 @@ static int vc4_plane_mode_set(struct drm + scl1 = vc4_get_scl_field(state, 0); + } + ++ h_subsample = drm_format_horz_chroma_subsampling(format->drm); ++ v_subsample = drm_format_vert_chroma_subsampling(format->drm); ++ + switch (base_format_mod) { + case DRM_FORMAT_MOD_LINEAR: + tiling = SCALER_CTL0_TILING_LINEAR; + pitch0 = VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH); ++ ++ /* Adjust the base pointer to the first pixel to be scanned ++ * out. ++ */ ++ for (i = 0; i < num_planes; i++) { ++ vc4_state->offsets[i] += vc4_state->src_y / ++ (i ? v_subsample : 1) * ++ fb->pitches[i]; ++ vc4_state->offsets[i] += vc4_state->src_x / ++ (i ? h_subsample : 1) * ++ fb->format->cpp[i]; ++ } + break; + + case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: { diff --git a/target/linux/brcm2708/patches-4.19/950-0692-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch b/target/linux/brcm2708/patches-4.19/950-0692-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch deleted file mode 100644 index 0a6f540145..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0692-media-vb2-Allow-reqbufs-0-with-in-use-MMAP-buffers.patch +++ /dev/null @@ -1,130 +0,0 @@ -From 16cf378051d7fff6772a7acaecbacddec7822330 Mon Sep 17 00:00:00 2001 -From: John Sheu -Date: Thu, 15 Nov 2018 10:57:16 -0500 -Subject: [PATCH 692/806] media: vb2: Allow reqbufs(0) with "in use" MMAP - buffers - -Upstream commit d644cca50f366cd109845ae92e37c09ed79adf81 - -Videobuf2 presently does not allow VIDIOC_REQBUFS to destroy outstanding -buffers if the queue is of type V4L2_MEMORY_MMAP, and if the buffers are -considered "in use". This is different behavior than for other memory -types and prevents us from deallocating buffers in following two cases: - -1) There are outstanding mmap()ed views on the buffer. However even if - we put the buffer in reqbufs(0), there will be remaining references, - due to vma .open/close() adjusting vb2 buffer refcount appropriately. - This means that the buffer will be in fact freed only when the last - mmap()ed view is unmapped. - -2) Buffer has been exported as a DMABUF. Refcount of the vb2 buffer - is managed properly by VB2 DMABUF ops, i.e. incremented on DMABUF - get and decremented on DMABUF release. This means that the buffer - will be alive until all importers release it. - -Considering both cases above, there does not seem to be any need to -prevent reqbufs(0) operation, because buffer lifetime is already -properly managed by both mmap() and DMABUF code paths. Let's remove it -and allow userspace freeing the queue (and potentially allocating a new -one) even though old buffers might be still in processing. - -To let userspace know that the kernel now supports orphaning buffers -that are still in use, add a new V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS -to be set by reqbufs and create_bufs. - -[p.zabel@pengutronix.de: added V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS, - updated documentation, and added back debug message] - -Signed-off-by: John Sheu -Reviewed-by: Pawel Osciak -Signed-off-by: Tomasz Figa -Signed-off-by: Philipp Zabel -Acked-by: Sakari Ailus -Signed-off-by: Hans Verkuil -[hverkuil-cisco@xs4all.nl: added V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS ref] -Signed-off-by: Mauro Carvalho Chehab ---- - Documentation/media/uapi/v4l/vidioc-reqbufs.rst | 17 ++++++++++++++--- - drivers/media/common/videobuf2/videobuf2-core.c | 8 +++----- - drivers/media/common/videobuf2/videobuf2-v4l2.c | 2 +- - include/uapi/linux/videodev2.h | 1 + - 4 files changed, 19 insertions(+), 9 deletions(-) - ---- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst -+++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst -@@ -59,9 +59,14 @@ When the I/O method is not supported the - code. - - Applications can call :ref:`VIDIOC_REQBUFS` again to change the number of --buffers, however this cannot succeed when any buffers are still mapped. --A ``count`` value of zero frees all buffers, after aborting or finishing --any DMA in progress, an implicit -+buffers. Note that if any buffers are still mapped or exported via DMABUF, -+then :ref:`VIDIOC_REQBUFS` can only succeed if the -+``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` capability is set. Otherwise -+:ref:`VIDIOC_REQBUFS` will return the ``EBUSY`` error code. -+If ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` is set, then these buffers are -+orphaned and will be freed when they are unmapped or when the exported DMABUF -+fds are closed. A ``count`` value of zero frees or orphans all buffers, after -+aborting or finishing any DMA in progress, an implicit - :ref:`VIDIOC_STREAMOFF `. - - -@@ -112,6 +117,7 @@ any DMA in progress, an implicit - .. _V4L2-BUF-CAP-SUPPORTS-USERPTR: - .. _V4L2-BUF-CAP-SUPPORTS-DMABUF: - .. _V4L2-BUF-CAP-SUPPORTS-REQUESTS: -+.. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS: - - .. cssclass:: longtable - -@@ -132,6 +138,11 @@ any DMA in progress, an implicit - * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS`` - - 0x00000008 - - This buffer type supports :ref:`requests `. -+ * - ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` -+ - 0x00000010 -+ - The kernel allows calling :ref:`VIDIOC_REQBUFS` while buffers are still -+ mapped or exported via DMABUF. These orphaned buffers will be freed -+ when they are unmapped or when the exported DMABUF fds are closed. - - Return Value - ============ ---- a/drivers/media/common/videobuf2/videobuf2-core.c -+++ b/drivers/media/common/videobuf2/videobuf2-core.c -@@ -684,11 +684,9 @@ int vb2_core_reqbufs(struct vb2_queue *q - * are not in use and can be freed. - */ - mutex_lock(&q->mmap_lock); -- if (q->memory == VB2_MEMORY_MMAP && __buffers_in_use(q)) { -- mutex_unlock(&q->mmap_lock); -- dprintk(1, "memory in use, cannot free\n"); -- return -EBUSY; -- } -+ if (debug && q->memory == VB2_MEMORY_MMAP && -+ __buffers_in_use(q)) -+ dprintk(1, "memory in use, orphaning buffers\n"); - - /* - * Call queue_cancel to clean up any buffers in the PREPARED or ---- a/drivers/media/common/videobuf2/videobuf2-v4l2.c -+++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c -@@ -484,7 +484,7 @@ EXPORT_SYMBOL(vb2_querybuf); - - static void fill_buf_caps(struct vb2_queue *q, u32 *caps) - { -- *caps = 0; -+ *caps = V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS; - if (q->io_modes & VB2_MMAP) - *caps |= V4L2_BUF_CAP_SUPPORTS_MMAP; - if (q->io_modes & VB2_USERPTR) ---- a/include/uapi/linux/videodev2.h -+++ b/include/uapi/linux/videodev2.h -@@ -881,6 +881,7 @@ struct v4l2_requestbuffers { - #define V4L2_BUF_CAP_SUPPORTS_USERPTR (1 << 1) - #define V4L2_BUF_CAP_SUPPORTS_DMABUF (1 << 2) - #define V4L2_BUF_CAP_SUPPORTS_REQUESTS (1 << 3) -+#define V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS (1 << 4) - - /** - * struct v4l2_plane - plane info for multi-planar buffers diff --git a/target/linux/brcm2708/patches-4.19/950-0693-drm-vc4-Fix-X-Y-positioning-of-planes-using-T_TILES-.patch b/target/linux/brcm2708/patches-4.19/950-0693-drm-vc4-Fix-X-Y-positioning-of-planes-using-T_TILES-.patch new file mode 100644 index 0000000000..6197d9076a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0693-drm-vc4-Fix-X-Y-positioning-of-planes-using-T_TILES-.patch @@ -0,0 +1,86 @@ +From 010e3665babdf589e26e2fb098ac1f39e519c0f6 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 3 Aug 2018 11:22:31 +0200 +Subject: [PATCH] drm/vc4: Fix X/Y positioning of planes using T_TILES + modifier + +X/Y positioning of T-format buffers is quite tricky and the current +implementation was failing to position a plane using this format +correctly when the CRTC X, Y or both X and Y offsets were negative. +It was also failing when the SRC X/Y offsets were != 0. + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-5-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/vc4/vc4_plane.c | 50 ++++++++++++++++++++++++++++----- + 1 file changed, 43 insertions(+), 7 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -578,22 +578,58 @@ static int vc4_plane_mode_set(struct drm + (i ? h_subsample : 1) * + fb->format->cpp[i]; + } ++ + break; + + case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: { +- /* For T-tiled, the FB pitch is "how many bytes from +- * one row to the next, such that pitch * tile_h == +- * tile_size * tiles_per_row." +- */ + u32 tile_size_shift = 12; /* T tiles are 4kb */ ++ /* Whole-tile offsets, mostly for setting the pitch. */ ++ u32 tile_w_shift = fb->format->cpp[0] == 2 ? 6 : 5; + u32 tile_h_shift = 5; /* 16 and 32bpp are 32 pixels high */ ++ u32 tile_w_mask = (1 << tile_w_shift) - 1; ++ /* The height mask on 32-bit-per-pixel tiles is 63, i.e. twice ++ * the height (in pixels) of a 4k tile. ++ */ ++ u32 tile_h_mask = (2 << tile_h_shift) - 1; ++ /* For T-tiled, the FB pitch is "how many bytes from one row to ++ * the next, such that ++ * ++ * pitch * tile_h == tile_size * tiles_per_row ++ */ + u32 tiles_w = fb->pitches[0] >> (tile_size_shift - tile_h_shift); ++ u32 tiles_l = vc4_state->src_x >> tile_w_shift; ++ u32 tiles_r = tiles_w - tiles_l; ++ u32 tiles_t = vc4_state->src_y >> tile_h_shift; ++ /* Intra-tile offsets, which modify the base address (the ++ * SCALER_PITCH0_TILE_Y_OFFSET tells HVS how to walk from that ++ * base address). ++ */ ++ u32 tile_y = (vc4_state->src_y >> 4) & 1; ++ u32 subtile_y = (vc4_state->src_y >> 2) & 3; ++ u32 utile_y = vc4_state->src_y & 3; ++ u32 x_off = vc4_state->src_x & tile_w_mask; ++ u32 y_off = vc4_state->src_y & tile_h_mask; + + tiling = SCALER_CTL0_TILING_256B_OR_T; ++ pitch0 = (VC4_SET_FIELD(x_off, SCALER_PITCH0_SINK_PIX) | ++ VC4_SET_FIELD(y_off, SCALER_PITCH0_TILE_Y_OFFSET) | ++ VC4_SET_FIELD(tiles_l, SCALER_PITCH0_TILE_WIDTH_L) | ++ VC4_SET_FIELD(tiles_r, SCALER_PITCH0_TILE_WIDTH_R)); ++ vc4_state->offsets[0] += tiles_t * (tiles_w << tile_size_shift); ++ vc4_state->offsets[0] += subtile_y << 8; ++ vc4_state->offsets[0] += utile_y << 4; ++ ++ /* Rows of tiles alternate left-to-right and right-to-left. */ ++ if (tiles_t & 1) { ++ pitch0 |= SCALER_PITCH0_TILE_INITIAL_LINE_DIR; ++ vc4_state->offsets[0] += (tiles_w - tiles_l) << ++ tile_size_shift; ++ vc4_state->offsets[0] -= (1 + !tile_y) << 10; ++ } else { ++ vc4_state->offsets[0] += tiles_l << tile_size_shift; ++ vc4_state->offsets[0] += tile_y << 10; ++ } + +- pitch0 = (VC4_SET_FIELD(0, SCALER_PITCH0_TILE_Y_OFFSET) | +- VC4_SET_FIELD(0, SCALER_PITCH0_TILE_WIDTH_L) | +- VC4_SET_FIELD(tiles_w, SCALER_PITCH0_TILE_WIDTH_R)); + break; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0693-overlays-Add-real-parameters-to-the-rpi-poe-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0693-overlays-Add-real-parameters-to-the-rpi-poe-overlay.patch deleted file mode 100644 index efc5964afc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0693-overlays-Add-real-parameters-to-the-rpi-poe-overlay.patch +++ /dev/null @@ -1,33 +0,0 @@ -From a11b6221e69ba4177ee428e2cb6fb4e4bd68c5f4 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 5 Jul 2019 09:22:10 +0100 -Subject: [PATCH 693/806] overlays: Add real parameters to the rpi-poe overlay - -As a result of being loaded by the POE HAT EEPROM, the rpi-poe overlay -doesn't expose parameters in the usual way; instead it adds them to -the base Device Tree, and the user is expected to use "dtparam=..." -to access them. - -To make the documentation correct and to protect users who load the -overlay explicitly, expecting to be able to use the parameters, add -real parameters to the overlay as well. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/rpi-poe-overlay.dts | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -@@ -60,4 +60,11 @@ - poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; - }; - }; -+ -+ __overrides__ { -+ poe_fan_temp0 = <&trip0>,"temperature:0"; -+ poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; -+ poe_fan_temp1 = <&trip1>,"temperature:0"; -+ poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; -+ }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0694-drm-vc4-Fix-NULL-pointer-dereference-in-the-async-up.patch b/target/linux/brcm2708/patches-4.19/950-0694-drm-vc4-Fix-NULL-pointer-dereference-in-the-async-up.patch new file mode 100644 index 0000000000..c9e779878b --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0694-drm-vc4-Fix-NULL-pointer-dereference-in-the-async-up.patch @@ -0,0 +1,57 @@ +From 0e81807e647c5e12fd897f3d520252ea60de3ff9 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 15 Nov 2018 11:58:51 +0100 +Subject: [PATCH] drm/vc4: Fix NULL pointer dereference in the async + update path + +vc4_plane_atomic_async_update() calls vc4_plane_atomic_check() +which in turn calls vc4_plane_setup_clipping_and_scaling(), and since +commit 58a6a36fe8e0 ("drm/vc4: Use +drm_atomic_helper_check_plane_state() to simplify the logic"), this +function accesses plane_state->state which will be NULL when called +from the async update path because we're passing the current plane +state, and plane_state->state has been assigned to NULL in +drm_atomic_helper_swap_state(). + +Pass the new state instead of the current one (the new state has +->state set to a non-NULL value). + +Fixes: 58a6a36fe8e0 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic") +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-1-boris.brezillon@bootlin.com +--- + drivers/gpu/drm/vc4/vc4_plane.c | 15 +++++++++++++-- + 1 file changed, 13 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -905,7 +905,7 @@ void vc4_plane_async_set_fb(struct drm_p + static void vc4_plane_atomic_async_update(struct drm_plane *plane, + struct drm_plane_state *state) + { +- struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state); ++ struct vc4_plane_state *vc4_state, *new_vc4_state; + + if (plane->state->fb != state->fb) { + vc4_plane_async_set_fb(plane, state->fb); +@@ -927,7 +927,18 @@ static void vc4_plane_atomic_async_updat + plane->state->src_y = state->src_y; + + /* Update the display list based on the new crtc_x/y. */ +- vc4_plane_atomic_check(plane, plane->state); ++ vc4_plane_atomic_check(plane, state); ++ ++ new_vc4_state = to_vc4_plane_state(state); ++ vc4_state = to_vc4_plane_state(plane->state); ++ ++ /* Update the current vc4_state pos0, pos2 and ptr0 dlist entries. */ ++ vc4_state->dlist[vc4_state->pos0_offset] = ++ new_vc4_state->dlist[vc4_state->pos0_offset]; ++ vc4_state->dlist[vc4_state->pos2_offset] = ++ new_vc4_state->dlist[vc4_state->pos2_offset]; ++ vc4_state->dlist[vc4_state->ptr0_offset] = ++ new_vc4_state->dlist[vc4_state->ptr0_offset]; + + /* Note that we can't just call vc4_plane_write_dlist() + * because that would smash the context data that the HVS is diff --git a/target/linux/brcm2708/patches-4.19/950-0694-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch b/target/linux/brcm2708/patches-4.19/950-0694-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch deleted file mode 100644 index f4137bbdd9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0694-overlays-Rename-pi3-overlays-to-be-less-model-specif.patch +++ /dev/null @@ -1,587 +0,0 @@ -From c46811a3b0e0fb76015ac956172e40bce4e6d9b3 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 5 Jul 2019 14:49:22 +0100 -Subject: [PATCH 694/806] overlays: Rename pi3- overlays to be less - model-specific (#3052) - -Rename the various pi3- overlays to be more generic, listing -the devices they apply to in the README. The original names are -retained for backwards compatibility as files that just include -the new versions - the README marks them as being deprecated. - -See: https://github.com/raspberrypi/firmware/issues/1174 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 4 + - arch/arm/boot/dts/overlays/README | 97 ++++++++++++------- - .../arm/boot/dts/overlays/act-led-overlay.dts | 27 ++++++ - .../boot/dts/overlays/disable-bt-overlay.dts | 55 +++++++++++ - .../dts/overlays/disable-wifi-overlay.dts | 20 ++++ - .../boot/dts/overlays/miniuart-bt-overlay.dts | 74 ++++++++++++++ - .../boot/dts/overlays/pi3-act-led-overlay.dts | 28 +----- - .../dts/overlays/pi3-disable-bt-overlay.dts | 56 +---------- - .../dts/overlays/pi3-disable-wifi-overlay.dts | 21 +--- - .../dts/overlays/pi3-miniuart-bt-overlay.dts | 75 +------------- - 10 files changed, 246 insertions(+), 211 deletions(-) - create mode 100644 arch/arm/boot/dts/overlays/act-led-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/disable-bt-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/disable-wifi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -1,6 +1,7 @@ - # Overlays for the Raspberry Pi platform - - dtbo-$(CONFIG_ARCH_BCM2835) += \ -+ act-led.dtbo \ - adau1977-adc.dtbo \ - adau7002-simple.dtbo \ - ads1015.dtbo \ -@@ -26,6 +27,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - dht11.dtbo \ - dionaudio-loco.dtbo \ - dionaudio-loco-v2.dtbo \ -+ disable-bt.dtbo \ -+ disable-wifi.dtbo \ - dpi18.dtbo \ - dpi24.dtbo \ - draws.dtbo \ -@@ -91,6 +94,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - media-center.dtbo \ - midi-uart0.dtbo \ - midi-uart1.dtbo \ -+ miniuart-bt.dtbo \ - mmc.dtbo \ - mpu6050.dtbo \ - mz61581.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -180,14 +180,16 @@ Params: - - act_led_activelow Set to "on" to invert the sense of the LED - (default "off") -- N.B. For Pi3 see pi3-act-led overlay. -+ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led -+ overlay. - - act_led_gpio Set which GPIO to use for the activity LED - (in case you want to connect it to an external - device) - (default "16" on a non-Plus board, "47" on a - Plus or Pi 2) -- N.B. For Pi3 see pi3-act-led overlay. -+ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led -+ overlay. - - pwr_led_trigger - pwr_led_activelow -@@ -205,6 +207,23 @@ Params: - and the other i2c baudrate parameters. - - -+Name: act-led -+Info: Pi 3B, 3B+, 3A+ and 4B use a GPIO expander to drive the LEDs which can -+ only be accessed from the VPU. There is a special driver for this with a -+ separate DT node, which has the unfortunate consequence of breaking the -+ act_led_gpio and act_led_activelow dtparams. -+ This overlay changes the GPIO controller back to the standard one and -+ restores the dtparams. -+Load: dtoverlay=act-led,= -+Params: activelow Set to "on" to invert the sense of the LED -+ (default "off") -+ -+ gpio Set which GPIO to use for the activity LED -+ (in case you want to connect it to an external -+ device) -+ REQUIRED -+ -+ - Name: adau1977-adc - Info: Overlay for activation of ADAU1977 ADC codec over I2C for control - and I2S for data. -@@ -509,6 +528,21 @@ Params: 24db_digital_gain Allow ga - that does not result in clipping/distortion!) - - -+Name: disable-bt -+Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring -+ UART0/ttyAMA0 over GPIOs 14 & 15. -+ N.B. To disable the systemd service that initialises the modem so it -+ doesn't use the UART, use 'sudo systemctl disable hciuart'. -+Load: dtoverlay=disable-bt -+Params: -+ -+ -+Name: disable-wifi -+Info: Disable onboard WiFi on Pi 3B, 3B+, 3A+, 4B and Zero W. -+Load: dtoverlay=disable-wifi -+Params: -+ -+ - Name: dpi18 - Info: Overlay for a generic 18-bit DPI display - This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output -@@ -1447,6 +1481,20 @@ Load: dtoverlay=midi-uart1 - Params: - - -+Name: miniuart-bt -+Info: Switch the onboard Bluetooth function on Pi 3B, 3B+, 3A+, 4B and Zero W -+ to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & -+ 15. Note that this may reduce the maximum usable baudrate. -+ N.B. It is also necessary to edit /lib/systemd/system/hciuart.service -+ and replace ttyAMA0 with ttyS0, unless using Raspbian or another -+ distribution with udev rules that create /dev/serial0 and /dev/serial1, -+ in which case use /dev/serial1 instead because it will always be -+ correct. Furthermore, you must also set core_freq and core_freq_min to -+ the same value in config.txt or the miniuart will not work. -+Load: dtoverlay=miniuart-bt -+Params: -+ -+ - Name: mmc - Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock - Load: dtoverlay=mmc,= -@@ -1509,48 +1557,27 @@ Params: panel Display - - - Name: pi3-act-led --Info: Pi3 uses a GPIO expander to drive the LEDs which can only be accessed -- from the VPU. There is a special driver for this with a separate DT -- node, which has the unfortunate consequence of breaking the -- act_led_gpio and act_led_activelow dtparams. -- This overlay changes the GPIO controller back to the standard one and -- restores the dtparams. --Load: dtoverlay=pi3-act-led,= --Params: activelow Set to "on" to invert the sense of the LED -- (default "off") -- -- gpio Set which GPIO to use for the activity LED -- (in case you want to connect it to an external -- device) -- REQUIRED -+Info: This overlay has been renamed act-led, keeping pi3-act-led as an alias -+ for backwards compatibility. -+Load: - - - Name: pi3-disable-bt --Info: Disable Pi3 Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15 -- N.B. To disable the systemd service that initialises the modem so it -- doesn't use the UART, use 'sudo systemctl disable hciuart'. --Load: dtoverlay=pi3-disable-bt --Params: -+Info: This overlay has been renamed disable-bt, keeping pi3-disable-bt as an -+ alias for backwards compatibility. -+Load: - - - Name: pi3-disable-wifi --Info: Disable Pi3 onboard WiFi --Load: dtoverlay=pi3-disable-wifi --Params: -+Info: This overlay has been renamed disable-wifi, keeping pi3-disable-wifi as -+ an alias for backwards compatibility. -+Load: - - - Name: pi3-miniuart-bt --Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore -- UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum -- usable baudrate. -- N.B. It is also necessary to edit /lib/systemd/system/hciuart.service -- and replace ttyAMA0 with ttyS0, unless you have a system with udev rules -- that create /dev/serial0 and /dev/serial1, in which case use -- /dev/serial1 instead because it will always be correct. Furthermore, -- you must also set core_freq=250 in config.txt or the miniuart will not -- work. --Load: dtoverlay=pi3-miniuart-bt --Params: -+Info: This overlay has been renamed miniuart-bt, keeping pi3-miniuart-bt as -+ an alias for backwards compatibility. -+Load: - - - Name: pibell ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/act-led-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed -+ from the VPU. There is a special driver for this with a separate DT node, -+ which has the unfortunate consequence of breaking the act_led_gpio and -+ act_led_activelow dtparams. -+ -+ This overlay changes the GPIO controller back to the standard one and -+ restores the dtparams. -+*/ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&act_led>; -+ frag0: __overlay__ { -+ gpios = <&gpio 0 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ gpio = <&frag0>,"gpios:4"; -+ activelow = <&frag0>,"gpios:8"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/disable-bt-overlay.dts -@@ -0,0 +1,55 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. -+ To disable the systemd service that initialises the modem so it doesn't use -+ the UART: -+ -+ sudo systemctl disable hciuart -+*/ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&uart1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart0>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&uart0_pins>; -+ __overlay__ { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&bt_pins>; -+ __overlay__ { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "/aliases"; -+ __overlay__ { -+ serial0 = "/soc/serial@7e201000"; -+ serial1 = "/soc/serial@7e215040"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/disable-wifi-overlay.dts -@@ -0,0 +1,20 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&mmc>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&mmcnr>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts -@@ -0,0 +1,74 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore -+ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum -+ usable baudrate. -+ -+ It is also necessary to edit /lib/systemd/system/hciuart.service and -+ replace ttyAMA0 with ttyS0, unless you have a system with udev rules -+ that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1 -+ instead because it will always be correct. -+ -+ If cmdline.txt uses the alias serial0 to refer to the user-accessable port -+ then the firmware will replace with the appropriate port whether or not -+ this overlay is used. -+*/ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&uart0>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart1>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&uart0_pins>; -+ __overlay__ { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&uart1_pins>; -+ __overlay__ { -+ brcm,pins = <32 33>; -+ brcm,function = <2>; /* alt5=UART1 */ -+ brcm,pull = <0 2>; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ fake_bt_cts: fake_bt_cts { -+ brcm,pins = <31>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "/aliases"; -+ __overlay__ { -+ serial0 = "/soc/serial@7e201000"; -+ serial1 = "/soc/serial@7e215040"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts -@@ -1,27 +1 @@ --/dts-v1/; --/plugin/; -- --/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed -- from the VPU. There is a special driver for this with a separate DT node, -- which has the unfortunate consequence of breaking the act_led_gpio and -- act_led_activelow dtparams. -- -- This overlay changes the GPIO controller back to the standard one and -- restores the dtparams. --*/ -- --/{ -- compatible = "brcm,bcm2835"; -- -- fragment@0 { -- target = <&act_led>; -- frag0: __overlay__ { -- gpios = <&gpio 0 0>; -- }; -- }; -- -- __overrides__ { -- gpio = <&frag0>,"gpios:4"; -- activelow = <&frag0>,"gpios:8"; -- }; --}; -+#include "act-led-overlay.dts" ---- a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts -@@ -1,55 +1 @@ --/dts-v1/; --/plugin/; -- --/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. -- To disable the systemd service that initialises the modem so it doesn't use -- the UART: -- -- sudo systemctl disable hciuart --*/ -- --/{ -- compatible = "brcm,bcm2835"; -- -- fragment@0 { -- target = <&uart1>; -- __overlay__ { -- status = "disabled"; -- }; -- }; -- -- fragment@1 { -- target = <&uart0>; -- __overlay__ { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart0_pins>; -- status = "okay"; -- }; -- }; -- -- fragment@2 { -- target = <&uart0_pins>; -- __overlay__ { -- brcm,pins; -- brcm,function; -- brcm,pull; -- }; -- }; -- -- fragment@3 { -- target = <&bt_pins>; -- __overlay__ { -- brcm,pins; -- brcm,function; -- brcm,pull; -- }; -- }; -- -- fragment@4 { -- target-path = "/aliases"; -- __overlay__ { -- serial0 = "/soc/serial@7e201000"; -- serial1 = "/soc/serial@7e215040"; -- }; -- }; --}; -+#include "disable-bt-overlay.dts" ---- a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts -@@ -1,20 +1 @@ --/dts-v1/; --/plugin/; -- --/{ -- compatible = "brcm,bcm2835"; -- -- fragment@0 { -- target = <&mmc>; -- __overlay__ { -- status = "disabled"; -- }; -- }; -- -- fragment@1 { -- target = <&mmcnr>; -- __overlay__ { -- status = "disabled"; -- }; -- }; --}; -+#include "disable-wifi-overlay.dts" ---- a/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts -@@ -1,74 +1 @@ --/dts-v1/; --/plugin/; -- --/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore -- UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum -- usable baudrate. -- -- It is also necessary to edit /lib/systemd/system/hciuart.service and -- replace ttyAMA0 with ttyS0, unless you have a system with udev rules -- that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1 -- instead because it will always be correct. -- -- If cmdline.txt uses the alias serial0 to refer to the user-accessable port -- then the firmware will replace with the appropriate port whether or not -- this overlay is used. --*/ -- --/{ -- compatible = "brcm,bcm2835"; -- -- fragment@0 { -- target = <&uart0>; -- __overlay__ { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart0_pins>; -- status = "okay"; -- }; -- }; -- -- fragment@1 { -- target = <&uart1>; -- __overlay__ { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>; -- status = "okay"; -- }; -- }; -- -- fragment@2 { -- target = <&uart0_pins>; -- __overlay__ { -- brcm,pins; -- brcm,function; -- brcm,pull; -- }; -- }; -- -- fragment@3 { -- target = <&uart1_pins>; -- __overlay__ { -- brcm,pins = <32 33>; -- brcm,function = <2>; /* alt5=UART1 */ -- brcm,pull = <0 2>; -- }; -- }; -- -- fragment@4 { -- target = <&gpio>; -- __overlay__ { -- fake_bt_cts: fake_bt_cts { -- brcm,pins = <31>; -- brcm,function = <1>; /* output */ -- }; -- }; -- }; -- -- fragment@5 { -- target-path = "/aliases"; -- __overlay__ { -- serial0 = "/soc/serial@7e201000"; -- serial1 = "/soc/serial@7e215040"; -- }; -- }; --}; -+#include "miniuart-bt-overlay.dts" diff --git a/target/linux/brcm2708/patches-4.19/950-0695-ARM-dts-bcm2711-rpi-4-b-I2C-aliases-and-pulls.patch b/target/linux/brcm2708/patches-4.19/950-0695-ARM-dts-bcm2711-rpi-4-b-I2C-aliases-and-pulls.patch new file mode 100644 index 0000000000..daae20c0d5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0695-ARM-dts-bcm2711-rpi-4-b-I2C-aliases-and-pulls.patch @@ -0,0 +1,67 @@ +From 188bd7c0085ac5b3d966aa899c6be644907157ea Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 12 Aug 2019 15:48:39 +0100 +Subject: [PATCH] ARM: dts: bcm2711-rpi-4-b: I2C aliases and pulls + +The I2C interface nodes need aliases to give them fixed bus numbers, +and setting the pulls on the GPIOs (particularly 9-13) increases the +chances of the bus working with weak or absent external pulls. + +See: https://www.raspberrypi.org/forums/posting.php?mode=reply&f=107&t=248439 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -23,6 +23,10 @@ + mmc0 = &emmc2; + mmc1 = &mmcnr; + mmc2 = &sdhost; ++ i2c3 = &i2c3; ++ i2c4 = &i2c4; ++ i2c5 = &i2c5; ++ i2c6 = &i2c6; + /delete-property/ ethernet; + /delete-property/ intc; + ethernet0 = &genet; +@@ -207,31 +211,37 @@ + i2c0_pins: i2c0 { + brcm,pins = <0 1>; + brcm,function = ; ++ brcm,pull = ; + }; + + i2c1_pins: i2c1 { + brcm,pins = <2 3>; + brcm,function = ; ++ brcm,pull = ; + }; + + i2c3_pins: i2c3 { + brcm,pins = <4 5>; + brcm,function = ; ++ brcm,pull = ; + }; + + i2c4_pins: i2c4 { + brcm,pins = <8 9>; + brcm,function = ; ++ brcm,pull = ; + }; + + i2c5_pins: i2c5 { + brcm,pins = <12 13>; + brcm,function = ; ++ brcm,pull = ; + }; + + i2c6_pins: i2c6 { + brcm,pins = <22 23>; + brcm,function = ; ++ brcm,pull = ; + }; + + i2s_pins: i2s { diff --git a/target/linux/brcm2708/patches-4.19/950-0695-i2c-bcm2835-Move-IRQ-request-after-clock-code-in-pro.patch b/target/linux/brcm2708/patches-4.19/950-0695-i2c-bcm2835-Move-IRQ-request-after-clock-code-in-pro.patch deleted file mode 100644 index ef556367f3..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0695-i2c-bcm2835-Move-IRQ-request-after-clock-code-in-pro.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 614cade3a68f7214939e1c72acd5fcc9d49beeef Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Fri, 21 Jun 2019 03:52:49 -0700 -Subject: [PATCH 695/806] i2c: bcm2835: Move IRQ request after clock code in - probe - -Commit 4a5cfa39465cad25dd736d7ceba8a5d32eea4ecc upstream. - -If any of the clock code in the probe fails and returns, the IRQ -will not be freed. Moving the IRQ request to last allows it to -be freed on any errors further up in the probe function. devm_ -calls can apparently not be used because there are some potential -race conditions that will arise. - -Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") -Signed-off-by: Annaliese McDermond -Acked-by: Stefan Wahren -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-bcm2835.c | 28 ++++++++++++++-------------- - 1 file changed, 14 insertions(+), 14 deletions(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -521,20 +521,6 @@ static int bcm2835_i2c_probe(struct plat - if (IS_ERR(i2c_dev->regs)) - return PTR_ERR(i2c_dev->regs); - -- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -- if (!irq) { -- dev_err(&pdev->dev, "No IRQ resource\n"); -- return -ENODEV; -- } -- i2c_dev->irq = irq->start; -- -- ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, -- dev_name(&pdev->dev), i2c_dev); -- if (ret) { -- dev_err(&pdev->dev, "Could not request IRQ\n"); -- return -ENODEV; -- } -- - mclk_name = of_clk_get_parent_name(pdev->dev.of_node, 0); - - bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk_name, i2c_dev); -@@ -564,6 +550,20 @@ static int bcm2835_i2c_probe(struct plat - return ret; - } - -+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ if (!irq) { -+ dev_err(&pdev->dev, "No IRQ resource\n"); -+ return -ENODEV; -+ } -+ i2c_dev->irq = irq->start; -+ -+ ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, -+ dev_name(&pdev->dev), i2c_dev); -+ if (ret) { -+ dev_err(&pdev->dev, "Could not request IRQ\n"); -+ return -ENODEV; -+ } -+ - adap = &i2c_dev->adapter; - i2c_set_adapdata(adap, i2c_dev); - adap->owner = THIS_MODULE; diff --git a/target/linux/brcm2708/patches-4.19/950-0696-i2c-bcm2835-Ensure-clock-exists-when-probing.patch b/target/linux/brcm2708/patches-4.19/950-0696-i2c-bcm2835-Ensure-clock-exists-when-probing.patch deleted file mode 100644 index 3cd1d376b1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0696-i2c-bcm2835-Ensure-clock-exists-when-probing.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 1a5122f1756ef4fc5779324ad26b6a04142166b5 Mon Sep 17 00:00:00 2001 -From: Annaliese McDermond -Date: Fri, 21 Jun 2019 03:52:50 -0700 -Subject: [PATCH 696/806] i2c: bcm2835: Ensure clock exists when probing - -Commit 9de93b04df16b055824e3f1f13fedb90fbcf2e4f upstream. - -Probe function fails to recognize that upstream clock actually -doesn't yet exist because clock driver has not been initialized. -Actually try to go get the clock and test for its existence -before trying to set up a downstream clock based upon it. - -This fixes a bug that causes the i2c driver not to work with -monolithic kernels. - -Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") -Signed-off-by: Annaliese McDermond -Acked-by: Stefan Wahren -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-bcm2835.c | 16 ++++++++++++---- - 1 file changed, 12 insertions(+), 4 deletions(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -244,15 +244,18 @@ static const struct clk_ops clk_bcm2835_ - }; - - static struct clk *bcm2835_i2c_register_div(struct device *dev, -- const char *mclk_name, -+ struct clk *mclk, - struct bcm2835_i2c_dev *i2c_dev) - { - struct clk_init_data init; - struct clk_bcm2835_i2c *priv; - char name[32]; -+ const char *mclk_name; - - snprintf(name, sizeof(name), "%s_div", dev_name(dev)); - -+ mclk_name = __clk_get_name(mclk); -+ - init.ops = &clk_bcm2835_i2c_ops; - init.name = name; - init.parent_names = (const char* []) { mclk_name }; -@@ -505,8 +508,8 @@ static int bcm2835_i2c_probe(struct plat - struct resource *mem, *irq; - int ret; - struct i2c_adapter *adap; -- const char *mclk_name; - struct clk *bus_clk; -+ struct clk *mclk; - u32 bus_clk_rate; - - i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); -@@ -521,9 +524,14 @@ static int bcm2835_i2c_probe(struct plat - if (IS_ERR(i2c_dev->regs)) - return PTR_ERR(i2c_dev->regs); - -- mclk_name = of_clk_get_parent_name(pdev->dev.of_node, 0); -+ mclk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(mclk)) { -+ if (PTR_ERR(mclk) != -EPROBE_DEFER) -+ dev_err(&pdev->dev, "Could not get clock\n"); -+ return PTR_ERR(mclk); -+ } - -- bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk_name, i2c_dev); -+ bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk, i2c_dev); - - if (IS_ERR(bus_clk)) { - dev_err(&pdev->dev, "Could not register clock\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0696-xhci-Use-more-event-ring-segment-table-entries.patch b/target/linux/brcm2708/patches-4.19/950-0696-xhci-Use-more-event-ring-segment-table-entries.patch new file mode 100644 index 0000000000..0949f97f62 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0696-xhci-Use-more-event-ring-segment-table-entries.patch @@ -0,0 +1,60 @@ +From c2e02902a3b75b24306dac06cb6f75b683fa0267 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Tue, 13 Aug 2019 15:53:29 +0100 +Subject: [PATCH] xhci: Use more event ring segment table entries + +Users have reported log spam created by "Event Ring Full" xHC event +TRBs. These are caused by interrupt latency in conjunction with a very +busy set of devices on the bus. The errors are benign, but throughput +will suffer as the xHC will pause processing of transfers until the +event ring is drained by the kernel. Expand the number of event TRB slots +available by increasing the number of event ring segments in the ERST. + +Controllers have a hardware-defined limit as to the number of ERST +entries they can process, so make the actual number in use +min(ERST_MAX_SEGS, hw_max). + +Signed-off-by: Jonathan Bell +--- + drivers/usb/host/xhci-mem.c | 8 +++++--- + drivers/usb/host/xhci.h | 4 ++-- + 2 files changed, 7 insertions(+), 5 deletions(-) + +--- a/drivers/usb/host/xhci-mem.c ++++ b/drivers/usb/host/xhci-mem.c +@@ -2495,9 +2495,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, + * Event ring setup: Allocate a normal ring, but also setup + * the event ring segment table (ERST). Section 4.9.3. + */ ++ val2 = 1 << HCS_ERST_MAX(xhci->hcs_params2); ++ val2 = min_t(unsigned int, ERST_MAX_SEGS, val2); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Allocating event ring"); +- xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, 1, TYPE_EVENT, +- 0, flags); ++ xhci->event_ring = xhci_ring_alloc(xhci, val2, 1, TYPE_EVENT, ++ 0, flags); + if (!xhci->event_ring) + goto fail; + if (xhci_check_trb_in_td_math(xhci) < 0) +@@ -2510,7 +2512,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, + /* set ERST count with the number of entries in the segment table */ + val = readl(&xhci->ir_set->erst_size); + val &= ERST_SIZE_MASK; +- val |= ERST_NUM_SEGS; ++ val |= val2; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Write ERST size = %i to ir_set 0 (some bits preserved)", + val); +--- a/drivers/usb/host/xhci.h ++++ b/drivers/usb/host/xhci.h +@@ -1643,8 +1643,8 @@ struct urb_priv { + * Each segment table entry is 4*32bits long. 1K seems like an ok size: + * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table, + * meaning 64 ring segments. +- * Initial allocated size of the ERST, in number of entries */ +-#define ERST_NUM_SEGS 1 ++ * Maximum number of segments in the ERST */ ++#define ERST_MAX_SEGS 8 + /* Initial allocated size of the ERST, in number of entries */ + #define ERST_SIZE 64 + /* Initial number of event segment rings allocated */ diff --git a/target/linux/brcm2708/patches-4.19/950-0697-dwc_otg-use-align_buf-for-small-IN-control-transfers.patch b/target/linux/brcm2708/patches-4.19/950-0697-dwc_otg-use-align_buf-for-small-IN-control-transfers.patch new file mode 100644 index 0000000000..fbfef019b0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0697-dwc_otg-use-align_buf-for-small-IN-control-transfers.patch @@ -0,0 +1,59 @@ +From 0c6190fa3cfeafd773b51b751a473d6775c23309 Mon Sep 17 00:00:00 2001 +From: P33M <2474547+P33M@users.noreply.github.com> +Date: Wed, 14 Aug 2019 14:35:50 +0100 +Subject: [PATCH] dwc_otg: use align_buf for small IN control transfers + (#3150) + +The hardware will do a 4-byte write to memory on any IN packet received +that is between 1 and 3 bytes long. This tramples memory in the uvcvideo +driver, as it uses a sequence of 1- and 2-byte control transfers to +query the min/max/range/step of each individual camera control and +gives us buffers that are offsets into a struct. + +Catch small control transfers in the data phase and use the align_buf +to bounce the correct number of bytes into the URB's buffer. + +In general, short packets on non-control endpoints should be OK as URBs +should have enough buffer space for a wMaxPacket size transfer. + +See: https://github.com/raspberrypi/linux/issues/3148 + +Signed-off-by: Jonathan Bell +--- + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -1182,6 +1182,7 @@ static void assign_and_init_hc(dwc_otg_h + dwc_otg_qtd_t *qtd; + dwc_otg_hcd_urb_t *urb; + void* ptr = NULL; ++ uint16_t wLength; + uint32_t intr_enable; + unsigned long flags; + gintmsk_data_t gintmsk = { .d32 = 0, }; +@@ -1293,6 +1294,23 @@ static void assign_and_init_hc(dwc_otg_h + break; + case DWC_OTG_CONTROL_DATA: + DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); ++ /* ++ * Hardware bug: small IN packets with length < 4 ++ * cause a 4-byte write to memory. We can only catch ++ * the case where we know a short packet is going to be ++ * returned in a control transfer, as the length is ++ * specified in the setup packet. This is only an issue ++ * for drivers that insist on packing a device's various ++ * properties into a struct and querying them one at a ++ * time (uvcvideo). ++ * Force the use of align_buf so that the subsequent ++ * memcpy puts the right number of bytes in the URB's ++ * buffer. ++ */ ++ wLength = ((uint16_t *)urb->setup_packet)[3]; ++ if (hc->ep_is_in && wLength < 4) ++ ptr = hc->xfer_buff; ++ + hc->data_pid_start = qtd->data_toggle; + break; + case DWC_OTG_CONTROL_STATUS: diff --git a/target/linux/brcm2708/patches-4.19/950-0697-overlays-i2c-gpio-Fix-the-bus-parameter.patch b/target/linux/brcm2708/patches-4.19/950-0697-overlays-i2c-gpio-Fix-the-bus-parameter.patch deleted file mode 100644 index 32c19a5412..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0697-overlays-i2c-gpio-Fix-the-bus-parameter.patch +++ /dev/null @@ -1,35 +0,0 @@ -From d562b2187263b40aacc1a50d3f25db2cf28696d6 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 9 Jul 2019 10:32:40 +0100 -Subject: [PATCH 697/806] overlays: i2c-gpio: Fix the "bus" parameter - -The "bus" parameter has two functions - providing unique names for -multiple instances of the overlay, and allowing the number of the bus -(i.e. "i2c-") to be specified. The second function hasn't worked -as intended because the overlay doesn't include a "reg" property and -the firmware intentionally won't create a "reg" property if one doesn't -already exist. - -Allow the bus numbering scheme to work as intended by providing a "reg" -with a default value that means "the next available one". - -See: https://github.com/raspberrypi/linux/issues/3062 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts -@@ -7,8 +7,10 @@ - - fragment@0 { - target-path = "/"; -+ - __overlay__ { - i2c_gpio: i2c@0 { -+ reg = <0xffffffff>; - compatible = "i2c-gpio"; - gpios = <&gpio 23 0 /* sda */ - &gpio 24 0 /* scl */ diff --git a/target/linux/brcm2708/patches-4.19/950-0698-Ported-pcie-brcmstb-bounce-buffer-implementation-to-.patch b/target/linux/brcm2708/patches-4.19/950-0698-Ported-pcie-brcmstb-bounce-buffer-implementation-to-.patch new file mode 100644 index 0000000000..c69a8ca16e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0698-Ported-pcie-brcmstb-bounce-buffer-implementation-to-.patch @@ -0,0 +1,818 @@ +From ccd23ce562e8223ba7c6acf7dcb7058ff89ff7ec Mon Sep 17 00:00:00 2001 +From: yaroslavros +Date: Wed, 14 Aug 2019 15:22:55 +0100 +Subject: [PATCH] Ported pcie-brcmstb bounce buffer implementation to + ARM64. (#3144) + +Ported pcie-brcmstb bounce buffer implementation to ARM64. +This enables full 4G RAM usage on Raspberry Pi in 64-bit mode. + +Signed-off-by: Yaroslav Rosomakho +--- + arch/arm64/include/asm/dma-mapping.h | 21 + + arch/arm64/mm/dma-mapping.c | 50 ++ + drivers/pci/controller/Makefile | 3 + + drivers/pci/controller/pcie-brcmstb-bounce.h | 2 +- + .../pci/controller/pcie-brcmstb-bounce64.c | 576 ++++++++++++++++++ + drivers/pci/controller/pcie-brcmstb.c | 30 +- + 6 files changed, 658 insertions(+), 24 deletions(-) + create mode 100644 drivers/pci/controller/pcie-brcmstb-bounce64.c + +--- a/arch/arm64/include/asm/dma-mapping.h ++++ b/arch/arm64/include/asm/dma-mapping.h +@@ -24,6 +24,27 @@ + #include + #include + ++extern void *arm64_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, ++ gfp_t gfp, unsigned long attrs); ++extern void arm64_dma_free(struct device *dev, size_t size, void *cpu_addr, ++ dma_addr_t handle, unsigned long attrs); ++extern int arm64_dma_mmap(struct device *dev, struct vm_area_struct *vma, ++ void *cpu_addr, dma_addr_t dma_addr, size_t size, ++ unsigned long attrs); ++extern int arm64_dma_get_sgtable(struct device *dev, struct sg_table *sgt, ++ void *cpu_addr, dma_addr_t dma_addr, size_t size, ++ unsigned long attrs); ++extern int arm64_dma_map_sg(struct device *dev, struct scatterlist *sgl, int nelems, ++ enum dma_data_direction dir, unsigned long attrs); ++extern void arm64_dma_unmap_sg(struct device *dev, struct scatterlist *sgl, int, ++ enum dma_data_direction dir, unsigned long attrs); ++extern void arm64_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl, int nelems, ++ enum dma_data_direction dir); ++extern void arm64_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, int nelems, ++ enum dma_data_direction dir); ++ ++ ++ + extern const struct dma_map_ops dummy_dma_ops; + + static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) +--- a/arch/arm64/mm/dma-mapping.c ++++ b/arch/arm64/mm/dma-mapping.c +@@ -138,6 +138,12 @@ no_mem: + return NULL; + } + ++void *arm64_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, ++ gfp_t gfp, unsigned long attrs) ++{ ++ return __dma_alloc(dev, size, handle, gfp, attrs); ++} ++ + static void __dma_free(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + unsigned long attrs) +@@ -154,6 +160,12 @@ static void __dma_free(struct device *de + swiotlb_free(dev, size, swiotlb_addr, dma_handle, attrs); + } + ++void arm64_dma_free(struct device *dev, size_t size, void *cpu_addr, ++ dma_addr_t handle, unsigned long attrs) ++{ ++ __dma_free(dev, size, cpu_addr, handle, attrs); ++} ++ + static dma_addr_t __swiotlb_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir, +@@ -197,6 +209,12 @@ static int __swiotlb_map_sg_attrs(struct + return ret; + } + ++int arm64_dma_map_sg(struct device *dev, struct scatterlist *sgl, int nelems, ++ enum dma_data_direction dir, unsigned long attrs) ++{ ++ return __swiotlb_map_sg_attrs(dev, sgl, nelems, dir, attrs); ++} ++ + static void __swiotlb_unmap_sg_attrs(struct device *dev, + struct scatterlist *sgl, int nelems, + enum dma_data_direction dir, +@@ -213,6 +231,12 @@ static void __swiotlb_unmap_sg_attrs(str + swiotlb_unmap_sg_attrs(dev, sgl, nelems, dir, attrs); + } + ++void arm64_dma_unmap_sg(struct device *dev, struct scatterlist *sgl, int nelems, ++ enum dma_data_direction dir, unsigned long attrs) ++{ ++ __swiotlb_unmap_sg_attrs(dev, sgl, nelems, dir, attrs); ++} ++ + static void __swiotlb_sync_single_for_cpu(struct device *dev, + dma_addr_t dev_addr, size_t size, + enum dma_data_direction dir) +@@ -245,6 +269,12 @@ static void __swiotlb_sync_sg_for_cpu(st + swiotlb_sync_sg_for_cpu(dev, sgl, nelems, dir); + } + ++void arm64_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl, int nelems, ++ enum dma_data_direction dir) ++{ ++ __swiotlb_sync_sg_for_cpu(dev, sgl, nelems, dir); ++} ++ + static void __swiotlb_sync_sg_for_device(struct device *dev, + struct scatterlist *sgl, int nelems, + enum dma_data_direction dir) +@@ -259,6 +289,12 @@ static void __swiotlb_sync_sg_for_device + sg->length, dir); + } + ++void arm64_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, int nelems, ++ enum dma_data_direction dir) ++{ ++ __swiotlb_sync_sg_for_device(dev, sgl, nelems, dir); ++} ++ + static int __swiotlb_mmap_pfn(struct vm_area_struct *vma, + unsigned long pfn, size_t size) + { +@@ -294,6 +330,13 @@ static int __swiotlb_mmap(struct device + return __swiotlb_mmap_pfn(vma, pfn, size); + } + ++int arm64_dma_mmap(struct device *dev, struct vm_area_struct *vma, ++ void *cpu_addr, dma_addr_t dma_addr, size_t size, ++ unsigned long attrs) ++{ ++ return __swiotlb_mmap(dev, vma, cpu_addr, dma_addr, size, attrs); ++} ++ + static int __swiotlb_get_sgtable_page(struct sg_table *sgt, + struct page *page, size_t size) + { +@@ -314,6 +357,13 @@ static int __swiotlb_get_sgtable(struct + return __swiotlb_get_sgtable_page(sgt, page, size); + } + ++int arm64_dma_get_sgtable(struct device *dev, struct sg_table *sgt, ++ void *cpu_addr, dma_addr_t dma_addr, size_t size, ++ unsigned long attrs) ++{ ++ return __swiotlb_get_sgtable(dev, sgt, cpu_addr, dma_addr, size, attrs); ++} ++ + static int __swiotlb_dma_supported(struct device *hwdev, u64 mask) + { + if (swiotlb) +--- a/drivers/pci/controller/Makefile ++++ b/drivers/pci/controller/Makefile +@@ -32,6 +32,9 @@ obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcms + ifdef CONFIG_ARM + obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb-bounce.o + endif ++ifdef CONFIG_ARM64 ++obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb-bounce64.o ++endif + + obj-$(CONFIG_VMD) += vmd.o + # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW +--- a/drivers/pci/controller/pcie-brcmstb-bounce.h ++++ b/drivers/pci/controller/pcie-brcmstb-bounce.h +@@ -6,7 +6,7 @@ + #ifndef _PCIE_BRCMSTB_BOUNCE_H + #define _PCIE_BRCMSTB_BOUNCE_H + +-#ifdef CONFIG_ARM ++#if defined(CONFIG_ARM) || defined(CONFIG_ARM64) + + int brcm_pcie_bounce_init(struct device *dev, unsigned long buffer_size, + dma_addr_t threshold); +--- /dev/null ++++ b/drivers/pci/controller/pcie-brcmstb-bounce64.c +@@ -0,0 +1,576 @@ ++/* ++ * This code started out as a version of arch/arm/common/dmabounce.c, ++ * modified to cope with highmem pages. Now it has been changed heavily - ++ * it now preallocates a large block (currently 4MB) and carves it up ++ * sequentially in ring fashion, and DMA is used to copy the data - to the ++ * point where very little of the original remains. ++ * ++ * Copyright (C) 2019 Raspberry Pi (Trading) Ltd. ++ * ++ * Original version by Brad Parker (brad@heeltoe.com) ++ * Re-written by Christopher Hoover ++ * Made generic by Deepak Saxena ++ * ++ * Copyright (C) 2002 Hewlett Packard Company. ++ * Copyright (C) 2004 MontaVista Software, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define STATS ++ ++#ifdef STATS ++#define DO_STATS(X) do { X ; } while (0) ++#else ++#define DO_STATS(X) do { } while (0) ++#endif ++ ++/* ************************************************** */ ++ ++struct safe_buffer { ++ struct list_head node; ++ ++ /* original request */ ++ size_t size; ++ int direction; ++ ++ struct dmabounce_pool *pool; ++ void *safe; ++ dma_addr_t unsafe_dma_addr; ++ dma_addr_t safe_dma_addr; ++}; ++ ++struct dmabounce_pool { ++ unsigned long pages; ++ void *virt_addr; ++ dma_addr_t dma_addr; ++ unsigned long *alloc_map; ++ unsigned long alloc_pos; ++ spinlock_t lock; ++ struct device *dev; ++ unsigned long num_pages; ++#ifdef STATS ++ size_t max_size; ++ unsigned long num_bufs; ++ unsigned long max_bufs; ++ unsigned long max_pages; ++#endif ++}; ++ ++struct dmabounce_device_info { ++ struct device *dev; ++ dma_addr_t threshold; ++ struct list_head safe_buffers; ++ struct dmabounce_pool pool; ++ rwlock_t lock; ++#ifdef STATS ++ unsigned long map_count; ++ unsigned long unmap_count; ++ unsigned long sync_dev_count; ++ unsigned long sync_cpu_count; ++ unsigned long fail_count; ++ int attr_res; ++#endif ++}; ++ ++static struct dmabounce_device_info *g_dmabounce_device_info; ++ ++extern int bcm2838_dma40_memcpy_init(void); ++extern void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size); ++ ++#ifdef STATS ++static ssize_t ++bounce_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ struct dmabounce_device_info *device_info = g_dmabounce_device_info; ++ return sprintf(buf, "m:%lu/%lu s:%lu/%lu f:%lu s:%zu b:%lu/%lu a:%lu/%lu\n", ++ device_info->map_count, ++ device_info->unmap_count, ++ device_info->sync_dev_count, ++ device_info->sync_cpu_count, ++ device_info->fail_count, ++ device_info->pool.max_size, ++ device_info->pool.num_bufs, ++ device_info->pool.max_bufs, ++ device_info->pool.num_pages * PAGE_SIZE, ++ device_info->pool.max_pages * PAGE_SIZE); ++} ++ ++static DEVICE_ATTR(dmabounce_stats, 0444, bounce_show, NULL); ++#endif ++ ++static int bounce_create(struct dmabounce_pool *pool, struct device *dev, ++ unsigned long buffer_size) ++{ ++ int ret = -ENOMEM; ++ pool->pages = (buffer_size + PAGE_SIZE - 1)/PAGE_SIZE; ++ pool->alloc_map = bitmap_zalloc(pool->pages, GFP_KERNEL); ++ if (!pool->alloc_map) ++ goto err_bitmap; ++ pool->virt_addr = dma_alloc_coherent(dev, pool->pages * PAGE_SIZE, ++ &pool->dma_addr, GFP_KERNEL); ++ if (!pool->virt_addr) ++ goto err_dmabuf; ++ ++ pool->alloc_pos = 0; ++ spin_lock_init(&pool->lock); ++ pool->dev = dev; ++ pool->num_pages = 0; ++ ++ DO_STATS(pool->max_size = 0); ++ DO_STATS(pool->num_bufs = 0); ++ DO_STATS(pool->max_bufs = 0); ++ DO_STATS(pool->max_pages = 0); ++ ++ return 0; ++ ++err_dmabuf: ++ bitmap_free(pool->alloc_map); ++err_bitmap: ++ return ret; ++} ++ ++static void bounce_destroy(struct dmabounce_pool *pool) ++{ ++ dma_free_coherent(pool->dev, pool->pages * PAGE_SIZE, pool->virt_addr, ++ pool->dma_addr); ++ ++ bitmap_free(pool->alloc_map); ++} ++ ++static void *bounce_alloc(struct dmabounce_pool *pool, size_t size, ++ dma_addr_t *dmaaddrp) ++{ ++ unsigned long pages; ++ unsigned long flags; ++ unsigned long pos; ++ ++ pages = (size + PAGE_SIZE - 1)/PAGE_SIZE; ++ ++ DO_STATS(pool->max_size = max(size, pool->max_size)); ++ ++ spin_lock_irqsave(&pool->lock, flags); ++ pos = bitmap_find_next_zero_area(pool->alloc_map, pool->pages, ++ pool->alloc_pos, pages, 0); ++ /* If not found, try from the start */ ++ if (pos >= pool->pages && pool->alloc_pos) ++ pos = bitmap_find_next_zero_area(pool->alloc_map, pool->pages, ++ 0, pages, 0); ++ ++ if (pos >= pool->pages) { ++ spin_unlock_irqrestore(&pool->lock, flags); ++ return NULL; ++ } ++ ++ bitmap_set(pool->alloc_map, pos, pages); ++ pool->alloc_pos = (pos + pages) % pool->pages; ++ pool->num_pages += pages; ++ ++ DO_STATS(pool->num_bufs++); ++ DO_STATS(pool->max_bufs = max(pool->num_bufs, pool->max_bufs)); ++ DO_STATS(pool->max_pages = max(pool->num_pages, pool->max_pages)); ++ ++ spin_unlock_irqrestore(&pool->lock, flags); ++ ++ *dmaaddrp = pool->dma_addr + pos * PAGE_SIZE; ++ ++ return pool->virt_addr + pos * PAGE_SIZE; ++} ++ ++static void ++bounce_free(struct dmabounce_pool *pool, void *buf, size_t size) ++{ ++ unsigned long pages; ++ unsigned long flags; ++ unsigned long pos; ++ ++ pages = (size + PAGE_SIZE - 1)/PAGE_SIZE; ++ pos = (buf - pool->virt_addr)/PAGE_SIZE; ++ ++ BUG_ON((buf - pool->virt_addr) & (PAGE_SIZE - 1)); ++ ++ spin_lock_irqsave(&pool->lock, flags); ++ bitmap_clear(pool->alloc_map, pos, pages); ++ pool->num_pages -= pages; ++ if (pool->num_pages == 0) ++ pool->alloc_pos = 0; ++ DO_STATS(pool->num_bufs--); ++ spin_unlock_irqrestore(&pool->lock, flags); ++} ++ ++/* allocate a 'safe' buffer and keep track of it */ ++static struct safe_buffer * ++alloc_safe_buffer(struct dmabounce_device_info *device_info, ++ dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) ++{ ++ struct safe_buffer *buf; ++ struct dmabounce_pool *pool = &device_info->pool; ++ struct device *dev = device_info->dev; ++ unsigned long flags; ++ ++ /* ++ * Although one might expect this to be called in thread context, ++ * using GFP_KERNEL here leads to hard-to-debug lockups. in_atomic() ++ * was previously used to select the appropriate allocation mode, ++ * but this is unsafe. ++ */ ++ buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC); ++ if (!buf) { ++ dev_warn(dev, "%s: kmalloc failed\n", __func__); ++ return NULL; ++ } ++ ++ buf->unsafe_dma_addr = dma_addr; ++ buf->size = size; ++ buf->direction = dir; ++ buf->pool = pool; ++ ++ buf->safe = bounce_alloc(pool, size, &buf->safe_dma_addr); ++ ++ if (!buf->safe) { ++ dev_warn(dev, ++ "%s: could not alloc dma memory (size=%d)\n", ++ __func__, size); ++ kfree(buf); ++ return NULL; ++ } ++ ++ write_lock_irqsave(&device_info->lock, flags); ++ list_add(&buf->node, &device_info->safe_buffers); ++ write_unlock_irqrestore(&device_info->lock, flags); ++ ++ return buf; ++} ++ ++/* determine if a buffer is from our "safe" pool */ ++static struct safe_buffer * ++find_safe_buffer(struct dmabounce_device_info *device_info, ++ dma_addr_t safe_dma_addr) ++{ ++ struct safe_buffer *b, *rb = NULL; ++ unsigned long flags; ++ ++ read_lock_irqsave(&device_info->lock, flags); ++ ++ list_for_each_entry(b, &device_info->safe_buffers, node) ++ if (b->safe_dma_addr <= safe_dma_addr && ++ b->safe_dma_addr + b->size > safe_dma_addr) { ++ rb = b; ++ break; ++ } ++ ++ read_unlock_irqrestore(&device_info->lock, flags); ++ return rb; ++} ++ ++static void ++free_safe_buffer(struct dmabounce_device_info *device_info, ++ struct safe_buffer *buf) ++{ ++ unsigned long flags; ++ ++ write_lock_irqsave(&device_info->lock, flags); ++ list_del(&buf->node); ++ write_unlock_irqrestore(&device_info->lock, flags); ++ ++ bounce_free(buf->pool, buf->safe, buf->size); ++ ++ kfree(buf); ++} ++ ++/* ************************************************** */ ++ ++static struct safe_buffer * ++find_safe_buffer_dev(struct device *dev, dma_addr_t dma_addr, const char *where) ++{ ++ if (!dev || !g_dmabounce_device_info) ++ return NULL; ++ if (dma_mapping_error(dev, dma_addr)) { ++ dev_err(dev, "Trying to %s invalid mapping\n", where); ++ return NULL; ++ } ++ return find_safe_buffer(g_dmabounce_device_info, dma_addr); ++} ++ ++static dma_addr_t ++map_single(struct device *dev, struct safe_buffer *buf, size_t size, ++ enum dma_data_direction dir, unsigned long attrs) ++{ ++ BUG_ON(buf->size != size); ++ BUG_ON(buf->direction != dir); ++ ++ dev_dbg(dev, "map: %llx->%llx\n", (u64)buf->unsafe_dma_addr, ++ (u64)buf->safe_dma_addr); ++ ++ if ((dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) && ++ !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) ++ bcm2838_dma40_memcpy(buf->safe_dma_addr, buf->unsafe_dma_addr, ++ size); ++ ++ return buf->safe_dma_addr; ++} ++ ++static dma_addr_t ++unmap_single(struct device *dev, struct safe_buffer *buf, size_t size, ++ enum dma_data_direction dir, unsigned long attrs) ++{ ++ BUG_ON(buf->size != size); ++ BUG_ON(buf->direction != dir); ++ ++ if ((dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) && ++ !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) { ++ dev_dbg(dev, "unmap: %llx->%llx\n", (u64)buf->safe_dma_addr, ++ (u64)buf->unsafe_dma_addr); ++ ++ bcm2838_dma40_memcpy(buf->unsafe_dma_addr, buf->safe_dma_addr, ++ size); ++ } ++ return buf->unsafe_dma_addr; ++} ++ ++/* ************************************************** */ ++ ++/* ++ * see if a buffer address is in an 'unsafe' range. if it is ++ * allocate a 'safe' buffer and copy the unsafe buffer into it. ++ * substitute the safe buffer for the unsafe one. ++ * (basically move the buffer from an unsafe area to a safe one) ++ */ ++static dma_addr_t ++dmabounce_map_page(struct device *dev, struct page *page, unsigned long offset, ++ size_t size, enum dma_data_direction dir, ++ unsigned long attrs) ++{ ++ struct dmabounce_device_info *device_info = g_dmabounce_device_info; ++ dma_addr_t dma_addr; ++ ++ dma_addr = phys_to_dma(dev, page_to_phys(page)) + offset; ++ ++ swiotlb_sync_single_for_device(dev, dma_addr, size, dir); ++ if (!is_device_dma_coherent(dev)) ++ __dma_map_area(phys_to_virt(dma_to_phys(dev, dma_addr)), size, dir); ++ ++ if (device_info && (dma_addr + size) > device_info->threshold) { ++ struct safe_buffer *buf; ++ ++ buf = alloc_safe_buffer(device_info, dma_addr, size, dir); ++ if (!buf) { ++ DO_STATS(device_info->fail_count++); ++ return (~(dma_addr_t)0x0); ++ } ++ ++ DO_STATS(device_info->map_count++); ++ ++ dma_addr = map_single(dev, buf, size, dir, attrs); ++ } ++ return dma_addr; ++} ++ ++/* ++ * see if a mapped address was really a "safe" buffer and if so, copy ++ * the data from the safe buffer back to the unsafe buffer and free up ++ * the safe buffer. (basically return things back to the way they ++ * should be) ++ */ ++static void ++dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, ++ enum dma_data_direction dir, unsigned long attrs) ++{ ++ struct safe_buffer *buf; ++ ++ buf = find_safe_buffer_dev(dev, dma_addr, __func__); ++ if (buf) { ++ DO_STATS(g_dmabounce_device_info->unmap_count++); ++ dma_addr = unmap_single(dev, buf, size, dir, attrs); ++ free_safe_buffer(g_dmabounce_device_info, buf); ++ } ++ ++ if (!is_device_dma_coherent(dev)) ++ __dma_unmap_area(phys_to_virt(dma_to_phys(dev, dma_addr)), size, dir); ++ swiotlb_sync_single_for_cpu(dev, dma_addr, size, dir); ++} ++ ++/* ++ * A version of dmabounce_map_page that assumes the mapping has already ++ * been created - intended for streaming operation. ++ */ ++static void ++dmabounce_sync_for_device(struct device *dev, dma_addr_t dma_addr, size_t size, ++ enum dma_data_direction dir) ++{ ++ struct safe_buffer *buf; ++ ++ swiotlb_sync_single_for_device(dev, dma_addr, size, dir); ++ if (!is_device_dma_coherent(dev)) ++ __dma_map_area(phys_to_virt(dma_to_phys(dev, dma_addr)), size, dir); ++ ++ buf = find_safe_buffer_dev(dev, dma_addr, __func__); ++ if (buf) { ++ DO_STATS(g_dmabounce_device_info->sync_dev_count++); ++ map_single(dev, buf, size, dir, 0); ++ } ++} ++ ++/* ++ * A version of dmabounce_unmap_page that doesn't destroy the mapping - ++ * intended for streaming operation. ++ */ ++static void ++dmabounce_sync_for_cpu(struct device *dev, dma_addr_t dma_addr, ++ size_t size, enum dma_data_direction dir) ++{ ++ struct safe_buffer *buf; ++ ++ buf = find_safe_buffer_dev(dev, dma_addr, __func__); ++ if (buf) { ++ DO_STATS(g_dmabounce_device_info->sync_cpu_count++); ++ dma_addr = unmap_single(dev, buf, size, dir, 0); ++ } ++ ++ if (!is_device_dma_coherent(dev)) ++ __dma_unmap_area(phys_to_virt(dma_to_phys(dev, dma_addr)), size, dir); ++ swiotlb_sync_single_for_cpu(dev, dma_addr, size, dir); ++} ++ ++static int dmabounce_dma_supported(struct device *dev, u64 dma_mask) ++{ ++ if (g_dmabounce_device_info) ++ return 0; ++ ++ return swiotlb_dma_supported(dev, dma_mask); ++} ++ ++static int dmabounce_mapping_error(struct device *dev, dma_addr_t dma_addr) ++{ ++ return swiotlb_dma_mapping_error(dev, dma_addr); ++} ++ ++static const struct dma_map_ops dmabounce_ops = { ++ .alloc = arm64_dma_alloc, ++ .free = arm64_dma_free, ++ .mmap = arm64_dma_mmap, ++ .get_sgtable = arm64_dma_get_sgtable, ++ .map_page = dmabounce_map_page, ++ .unmap_page = dmabounce_unmap_page, ++ .sync_single_for_cpu = dmabounce_sync_for_cpu, ++ .sync_single_for_device = dmabounce_sync_for_device, ++ .map_sg = arm64_dma_map_sg, ++ .unmap_sg = arm64_dma_unmap_sg, ++ .sync_sg_for_cpu = arm64_dma_sync_sg_for_cpu, ++ .sync_sg_for_device = arm64_dma_sync_sg_for_device, ++ .dma_supported = dmabounce_dma_supported, ++ .mapping_error = dmabounce_mapping_error, ++}; ++ ++int brcm_pcie_bounce_init(struct device *dev, ++ unsigned long buffer_size, ++ dma_addr_t threshold) ++{ ++ struct dmabounce_device_info *device_info; ++ int ret; ++ ++ /* Only support a single client */ ++ if (g_dmabounce_device_info) ++ return -EBUSY; ++ ++ ret = bcm2838_dma40_memcpy_init(); ++ if (ret) ++ return ret; ++ ++ device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC); ++ if (!device_info) { ++ dev_err(dev, ++ "Could not allocated dmabounce_device_info\n"); ++ return -ENOMEM; ++ } ++ ++ ret = bounce_create(&device_info->pool, dev, buffer_size); ++ if (ret) { ++ dev_err(dev, ++ "dmabounce: could not allocate %ld byte DMA pool\n", ++ buffer_size); ++ goto err_bounce; ++ } ++ ++ device_info->dev = dev; ++ device_info->threshold = threshold; ++ INIT_LIST_HEAD(&device_info->safe_buffers); ++ rwlock_init(&device_info->lock); ++ ++ DO_STATS(device_info->map_count = 0); ++ DO_STATS(device_info->unmap_count = 0); ++ DO_STATS(device_info->sync_dev_count = 0); ++ DO_STATS(device_info->sync_cpu_count = 0); ++ DO_STATS(device_info->fail_count = 0); ++ DO_STATS(device_info->attr_res = ++ device_create_file(dev, &dev_attr_dmabounce_stats)); ++ ++ g_dmabounce_device_info = device_info; ++ ++ dev_err(dev, "dmabounce: initialised - %ld kB, threshold %pad\n", ++ buffer_size / 1024, &threshold); ++ ++ return 0; ++ ++ err_bounce: ++ kfree(device_info); ++ return ret; ++} ++EXPORT_SYMBOL(brcm_pcie_bounce_init); ++ ++void brcm_pcie_bounce_uninit(struct device *dev) ++{ ++ struct dmabounce_device_info *device_info = g_dmabounce_device_info; ++ ++ g_dmabounce_device_info = NULL; ++ ++ if (!device_info) { ++ dev_warn(dev, ++ "Never registered with dmabounce but attempting" ++ "to unregister!\n"); ++ return; ++ } ++ ++ if (!list_empty(&device_info->safe_buffers)) { ++ dev_err(dev, ++ "Removing from dmabounce with pending buffers!\n"); ++ BUG(); ++ } ++ ++ bounce_destroy(&device_info->pool); ++ ++ DO_STATS(if (device_info->attr_res == 0) ++ device_remove_file(dev, &dev_attr_dmabounce_stats)); ++ ++ kfree(device_info); ++} ++EXPORT_SYMBOL(brcm_pcie_bounce_uninit); ++ ++int brcm_pcie_bounce_register_dev(struct device *dev) ++{ ++ set_dma_ops(dev, &dmabounce_ops); ++ ++ return 0; ++} ++EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); ++ ++MODULE_AUTHOR("Phil Elwell "); ++MODULE_DESCRIPTION("Dedicate DMA bounce support for pcie-brcmstb"); ++MODULE_LICENSE("GPL"); +--- a/drivers/pci/controller/pcie-brcmstb.c ++++ b/drivers/pci/controller/pcie-brcmstb.c +@@ -617,28 +617,6 @@ static const struct dma_map_ops brcm_dma + + static void brcm_set_dma_ops(struct device *dev) + { +- int ret; +- +- if (IS_ENABLED(CONFIG_ARM64)) { +- /* +- * We are going to invoke get_dma_ops(). That +- * function, at this point in time, invokes +- * get_arch_dma_ops(), and for ARM64 that function +- * returns a pointer to dummy_dma_ops. So then we'd +- * like to call arch_setup_dma_ops(), but that isn't +- * exported. Instead, we call of_dma_configure(), +- * which is exported, and this calls +- * arch_setup_dma_ops(). Once we do this the call to +- * get_dma_ops() will work properly because +- * dev->dma_ops will be set. +- */ +- ret = of_dma_configure(dev, dev->of_node, true); +- if (ret) { +- dev_err(dev, "of_dma_configure() failed: %d\n", ret); +- return; +- } +- } +- + arch_dma_ops = get_dma_ops(dev); + if (!arch_dma_ops) { + dev_err(dev, "failed to get arch_dma_ops\n"); +@@ -657,12 +635,12 @@ static int brcmstb_platform_notifier(str + extern unsigned long max_pfn; + struct device *dev = __dev; + const char *rc_name = "0000:00:00.0"; ++ int ret; + + switch (event) { + case BUS_NOTIFY_ADD_DEVICE: + if (max_pfn > (bounce_threshold/PAGE_SIZE) && + strcmp(dev->kobj.name, rc_name)) { +- int ret; + + ret = brcm_pcie_bounce_register_dev(dev); + if (ret) { +@@ -671,6 +649,12 @@ static int brcmstb_platform_notifier(str + ret); + return ret; + } ++ } else if (IS_ENABLED(CONFIG_ARM64)) { ++ ret = of_dma_configure(dev, dev->of_node, true); ++ if (ret) { ++ dev_err(dev, "of_dma_configure() failed: %d\n", ret); ++ return; ++ } + } + brcm_set_dma_ops(dev); + return NOTIFY_OK; diff --git a/target/linux/brcm2708/patches-4.19/950-0698-tty-amba-pl011-Make-TX-optimisation-conditional.patch b/target/linux/brcm2708/patches-4.19/950-0698-tty-amba-pl011-Make-TX-optimisation-conditional.patch deleted file mode 100644 index 6b7ab56859..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0698-tty-amba-pl011-Make-TX-optimisation-conditional.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 3e3c13488e4efa0236c47a98ee5e759bf1f7c757 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 11 Jul 2019 13:13:39 +0100 -Subject: [PATCH 698/806] tty: amba-pl011: Make TX optimisation conditional - -pl011_tx_chars takes a "from_irq" parameter to reduce the number of -register accesses. When from_irq is true the function assumes that the -FIFO is half empty and writes up to half a FIFO's worth of bytes -without polling the FIFO status register, the reasoning being that -the function is being called as a result of the TX interrupt being -raised. This logic would work were it not for the fact that -pl011_rx_chars, called from pl011_int before pl011_tx_chars, releases -the spinlock before calling tty_flip_buffer_push. - -A user thread writing to the UART claims the spinlock and ultimately -calls pl011_tx_chars with from_irq set to false. This reverts to the -older logic that polls the FIFO status register before sending every -byte. If this happen on an SMP system during the section of the IRQ -handler where the spinlock has been released, then by the time the TX -interrupt handler is called, the FIFO may already be full, and any -further writes are likely to be lost. - -The fix involves adding a per-port flag that is true iff running from -within the interrupt handler and the spinlock has not yet been released. -This flag is then used as the value for the from_irq parameter of -pl011_tx_chars, causing polling to be used in the unsafe case. - -Fixes: 1e84d22322ce ("serial/amba-pl011: Refactor and simplify TX FIFO handling") - -Signed-off-by: Phil Elwell ---- - drivers/tty/serial/amba-pl011.c | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - ---- a/drivers/tty/serial/amba-pl011.c -+++ b/drivers/tty/serial/amba-pl011.c -@@ -270,6 +270,7 @@ struct uart_amba_port { - unsigned int old_cr; /* state during shutdown */ - unsigned int fixed_baud; /* vendor-set fixed baud rate */ - char type[12]; -+ bool irq_locked; /* in irq, unreleased lock */ - #ifdef CONFIG_DMA_ENGINE - /* DMA stuff */ - bool using_tx_dma; -@@ -813,6 +814,7 @@ __acquires(&uap->port.lock) - if (!uap->using_tx_dma) - return; - -+ uap->irq_locked = 0; - dmaengine_terminate_async(uap->dmatx.chan); - - if (uap->dmatx.queued) { -@@ -939,6 +941,7 @@ static void pl011_dma_rx_chars(struct ua - fifotaken = pl011_fifo_to_tty(uap); - } - -+ uap->irq_locked = 0; - spin_unlock(&uap->port.lock); - dev_vdbg(uap->port.dev, - "Took %d chars from DMA buffer and %d chars from the FIFO\n", -@@ -1347,6 +1350,7 @@ __acquires(&uap->port.lock) - { - pl011_fifo_to_tty(uap); - -+ uap->irq_locked = 0; - spin_unlock(&uap->port.lock); - tty_flip_buffer_push(&uap->port.state->port); - /* -@@ -1482,6 +1486,7 @@ static irqreturn_t pl011_int(int irq, vo - int handled = 0; - - spin_lock_irqsave(&uap->port.lock, flags); -+ uap->irq_locked = 1; - status = pl011_read(uap, REG_RIS) & uap->im; - if (status) { - do { -@@ -1501,7 +1506,7 @@ static irqreturn_t pl011_int(int irq, vo - UART011_CTSMIS|UART011_RIMIS)) - pl011_modem_status(uap); - if (status & UART011_TXIS) -- pl011_tx_chars(uap, true); -+ pl011_tx_chars(uap, uap->irq_locked); - - if (pass_counter-- == 0) - break; diff --git a/target/linux/brcm2708/patches-4.19/950-0699-configs-arm64-vcm2711-Enable-V3D.patch b/target/linux/brcm2708/patches-4.19/950-0699-configs-arm64-vcm2711-Enable-V3D.patch new file mode 100644 index 0000000000..e09e57b6c4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0699-configs-arm64-vcm2711-Enable-V3D.patch @@ -0,0 +1,27 @@ +From 709962264bec8f8483df374da5e946c982348e87 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 15 Aug 2019 12:02:34 +0100 +Subject: [PATCH] configs: arm64/vcm2711: Enable V3D + +Enable the V3D driver, which depends on BCM2835_POWER. + +Originally submitted by GitHub user 'phire' in a slightly different +form. + +See: https://github.com/raspberrypi/linux/pull/3063 + +Signed-off-by: Phil Elwell +--- + drivers/gpu/drm/v3d/Kconfig | 2 +- + 2 files changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/v3d/Kconfig ++++ b/drivers/gpu/drm/v3d/Kconfig +@@ -1,6 +1,6 @@ + config DRM_V3D + tristate "Broadcom V3D 3.x and newer" +- depends on ARCH_BCM || ARCH_BCMSTB || COMPILE_TEST ++ depends on ARCH_BCM || ARCH_BCMSTB || ARCH_BCM2835 || COMPILE_TEST + depends on DRM + depends on COMMON_CLK + depends on MMU diff --git a/target/linux/brcm2708/patches-4.19/950-0699-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch b/target/linux/brcm2708/patches-4.19/950-0699-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch deleted file mode 100644 index becbe1502e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0699-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 705bc230789927f96d6c9c70dc5475ebaf08aa54 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Thu, 11 Jul 2019 17:55:43 +0100 -Subject: [PATCH 699/806] xhci: add quirk for host controllers that don't - update endpoint DCS - -Seen on a VLI VL805 PCIe to USB controller. For non-stream endpoints -at least, if the xHC halts on a particular TRB due to an error then -the DCS field in the Out Endpoint Context maintained by the hardware -is not updated with the current cycle state. - -Using the quirk XHCI_EP_CTX_BROKEN_DCS and instead fetch the DCS bit -from the TRB that the xHC stopped on. - -See: https://github.com/raspberrypi/linux/issues/3060 - -Signed-off-by: Jonathan Bell ---- - drivers/usb/host/xhci-pci.c | 4 +++- - drivers/usb/host/xhci-ring.c | 26 +++++++++++++++++++++++++- - drivers/usb/host/xhci.h | 1 + - 3 files changed, 29 insertions(+), 2 deletions(-) - ---- a/drivers/usb/host/xhci-pci.c -+++ b/drivers/usb/host/xhci-pci.c -@@ -223,8 +223,10 @@ static void xhci_pci_quirks(struct devic - xhci->quirks |= XHCI_BROKEN_STREAMS; - - if (pdev->vendor == PCI_VENDOR_ID_VIA && -- pdev->device == 0x3483) -+ pdev->device == 0x3483) { - xhci->quirks |= XHCI_LPM_SUPPORT; -+ xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS; -+ } - - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && - pdev->device == 0x1042) ---- a/drivers/usb/host/xhci-ring.c -+++ b/drivers/usb/host/xhci-ring.c -@@ -520,7 +520,10 @@ void xhci_find_new_dequeue_state(struct - struct xhci_virt_ep *ep = &dev->eps[ep_index]; - struct xhci_ring *ep_ring; - struct xhci_segment *new_seg; -+ struct xhci_segment *halted_seg = NULL; - union xhci_trb *new_deq; -+ union xhci_trb *halted_trb; -+ int index = 0; - dma_addr_t addr; - u64 hw_dequeue; - bool cycle_found = false; -@@ -541,7 +544,28 @@ void xhci_find_new_dequeue_state(struct - hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id); - new_seg = ep_ring->deq_seg; - new_deq = ep_ring->dequeue; -- state->new_cycle_state = hw_dequeue & 0x1; -+ -+ /* -+ * Quirk: xHC write-back of the DCS field in the hardware dequeue -+ * pointer is wrong - use the cycle state of the TRB pointed to by -+ * the dequeue pointer. -+ */ -+ if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS && -+ !(ep->ep_state & EP_HAS_STREAMS)) -+ halted_seg = trb_in_td(xhci, cur_td->start_seg, -+ cur_td->first_trb, cur_td->last_trb, -+ hw_dequeue & ~0xf, false); -+ if (halted_seg) { -+ index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) / -+ sizeof(*halted_trb); -+ halted_trb = &halted_seg->trbs[index]; -+ state->new_cycle_state = halted_trb->generic.field[3] & 0x1; -+ xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n", -+ (u8)(hw_dequeue & 0x1), index, -+ state->new_cycle_state); -+ } else { -+ state->new_cycle_state = hw_dequeue & 0x1; -+ } - state->stream_id = stream_id; - - /* ---- a/drivers/usb/host/xhci.h -+++ b/drivers/usb/host/xhci.h -@@ -1865,6 +1865,7 @@ struct xhci_hcd { - #define XHCI_ZERO_64B_REGS BIT_ULL(32) - #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) - #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) -+#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(36) - - unsigned int num_active_eps; - unsigned int limit_active_eps; diff --git a/target/linux/brcm2708/patches-4.19/950-0700-i2c-bcm2835-Set-clock-stretch-timeout-to-35ms.patch b/target/linux/brcm2708/patches-4.19/950-0700-i2c-bcm2835-Set-clock-stretch-timeout-to-35ms.patch deleted file mode 100644 index cd2394d23e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0700-i2c-bcm2835-Set-clock-stretch-timeout-to-35ms.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 8d453e2193951057db696e37b9c10e7e35c18cb0 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 12 Jul 2019 15:38:35 +0100 -Subject: [PATCH 700/806] i2c: bcm2835: Set clock-stretch timeout to 35ms - -The BCM2835 I2C blocks have a register to set the clock-stretch -timeout - how long the device is allowed to hold SCL low - in bus -cycles. The current driver doesn't write to the register, therefore -the default value of 64 cycles is being used for all devices. - -Set the timeout to the value recommended for SMBus - 35ms. - -See: https://github.com/raspberrypi/linux/issues/3064 - -Signed-off-by: Phil Elwell ---- - drivers/i2c/busses/i2c-bcm2835.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -194,6 +194,7 @@ static int clk_bcm2835_i2c_set_rate(stru - { - struct clk_bcm2835_i2c *div = to_clk_bcm2835_i2c(hw); - u32 redl, fedl; -+ u32 clk_tout; - u32 divider = clk_bcm2835_i2c_calc_divider(rate, parent_rate); - - if (divider == -EINVAL) -@@ -217,6 +218,17 @@ static int clk_bcm2835_i2c_set_rate(stru - bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_DEL, - (fedl << BCM2835_I2C_FEDL_SHIFT) | - (redl << BCM2835_I2C_REDL_SHIFT)); -+ -+ /* -+ * Set the clock stretch timeout to the SMBUs-recommended 35ms. -+ */ -+ if (rate > 0xffff*1000/35) -+ clk_tout = 0xffff; -+ else -+ clk_tout = 35*rate/1000; -+ -+ bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_CLKT, clk_tout); -+ - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0700-overlays-sc16ic752-i2c-Fix-xtal-parameter.patch b/target/linux/brcm2708/patches-4.19/950-0700-overlays-sc16ic752-i2c-Fix-xtal-parameter.patch new file mode 100644 index 0000000000..d148696640 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0700-overlays-sc16ic752-i2c-Fix-xtal-parameter.patch @@ -0,0 +1,24 @@ +From ee24998ecaed3d03890a7a5e04dddb8c5d073e97 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Sat, 17 Aug 2019 19:47:30 +0100 +Subject: [PATCH] overlays: sc16ic752-i2c: Fix xtal parameter + +The xtal parameter is targetting the wrong node - fix it. + +See: https://github.com/raspberrypi/linux/issues/3156 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts +@@ -35,6 +35,6 @@ + __overrides__ { + int_pin = <&sc16is752>,"interrupts:0"; + addr = <&sc16is752>,"reg:0",<&sc16is752_clk>,"name"; +- xtal = <&sc16is752>,"clock-frequency:0"; ++ xtal = <&sc16is752_clk>,"clock-frequency:0"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0701-arm64-bcm2835-Add-missing-dependency-on-MFD_CORE.patch b/target/linux/brcm2708/patches-4.19/950-0701-arm64-bcm2835-Add-missing-dependency-on-MFD_CORE.patch deleted file mode 100644 index f6befd75aa..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0701-arm64-bcm2835-Add-missing-dependency-on-MFD_CORE.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 39964e4a3a2ea18b48be5c31d7980895f0bdd99c Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 8 Mar 2019 13:02:16 -0800 -Subject: [PATCH 701/806] arm64: bcm2835: Add missing dependency on MFD_CORE. - -commit 7a9b6be9fe58194d9a349159176e8cc0d8f10ef8 upstream. - -When adding the MFD dependency for power domains and WDT in bcm2835, I -added it only on the arm32 side and missed it for arm64. - -Fixes: 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.") -Signed-off-by: Eric Anholt -Reported-by: Stefan Wahren -Acked-by: Stefan Wahren ---- - arch/arm64/Kconfig.platforms | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/Kconfig.platforms -+++ b/arch/arm64/Kconfig.platforms -@@ -20,6 +20,7 @@ config ARCH_BCM2835 - bool "Broadcom BCM2835 family" - select TIMER_OF - select GPIOLIB -+ select MFD_CORE - select PINCTRL - select PINCTRL_BCM2835 - select ARM_AMBA diff --git a/target/linux/brcm2708/patches-4.19/950-0701-vc-sm-cma-Fix-compatibility-ioctl.patch b/target/linux/brcm2708/patches-4.19/950-0701-vc-sm-cma-Fix-compatibility-ioctl.patch new file mode 100644 index 0000000000..af453ec307 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0701-vc-sm-cma-Fix-compatibility-ioctl.patch @@ -0,0 +1,64 @@ +From a24a0a621486b36bcdf5c5e0afb05a5d1dd30003 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 19 Aug 2019 15:45:20 +0100 +Subject: [PATCH] vc-sm-cma: Fix compatibility ioctl + +This code path hasn't been used previously. +Fixed up after testing with kodi on 32-bit userland and 64-bit kernel + +Signed-off-by: popcornmix +--- + drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 12 ++++-------- + 1 file changed, 4 insertions(+), 8 deletions(-) + +--- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c ++++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c +@@ -1501,11 +1501,10 @@ static long vc_sm_cma_ioctl(struct file + return ret; + } + +-#ifndef CONFIG_ARM64 + #ifdef CONFIG_COMPAT + struct vc_sm_cma_ioctl_clean_invalid2_32 { + u32 op_count; +- struct vc_sm_cma_ioctl_clean_invalid_block { ++ struct vc_sm_cma_ioctl_clean_invalid_block_32 { + u16 invalidate_mode; + u16 block_count; + compat_uptr_t start_address; +@@ -1516,7 +1515,7 @@ struct vc_sm_cma_ioctl_clean_invalid2_32 + + #define VC_SM_CMA_CMD_CLEAN_INVALID2_32\ + _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_CLEAN_INVALID2,\ +- struct vc_sm_cma_ioctl_clean_invalid2) ++ struct vc_sm_cma_ioctl_clean_invalid2_32) + + static long vc_sm_cma_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +@@ -1524,24 +1523,21 @@ static long vc_sm_cma_compat_ioctl(struc + switch (cmd) { + case VC_SM_CMA_CMD_CLEAN_INVALID2_32: + /* FIXME */ +- break; ++ return -EINVAL; + + default: +- return vc_sm_cma_compat_ioctl(file, cmd, arg); ++ return vc_sm_cma_ioctl(file, cmd, arg); + } + } + #endif +-#endif + + /* Device operations that we managed in this driver. */ + static const struct file_operations vc_sm_ops = { + .owner = THIS_MODULE, + .unlocked_ioctl = vc_sm_cma_ioctl, +-#ifndef CONFIG_ARM64 + #ifdef CONFIG_COMPAT + .compat_ioctl = vc_sm_cma_compat_ioctl, + #endif +-#endif + .open = vc_sm_cma_open, + .release = vc_sm_cma_release, + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0702-overlays-Add-PCF2129-RTC.patch b/target/linux/brcm2708/patches-4.19/950-0702-overlays-Add-PCF2129-RTC.patch deleted file mode 100644 index 9eaa75ac50..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0702-overlays-Add-PCF2129-RTC.patch +++ /dev/null @@ -1,187 +0,0 @@ -From 2308f60bb68de69306c542de3983be0007cad37b Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 15 Jul 2019 10:39:05 +0100 -Subject: [PATCH 702/806] overlays: Add PCF2129 RTC - -Add support for the PCF2129 RTC to i2c-rtc and i2c-rtc-gpio overlays. -Also add rv3028 to i2c-rtc-gpio (it was missed previously), and don't -attempt to set an alternate address for the PCF2127. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 11 ++++- - .../dts/overlays/i2c-rtc-gpio-overlay.dts | 41 +++++++++++++++++-- - .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 19 ++++++++- - 3 files changed, 64 insertions(+), 7 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1022,6 +1022,8 @@ Params: abx80x Select o - - pcf2127 Select the PCF2127 device - -+ pcf2129 Select the PCF2129 device -+ - pcf8523 Select the PCF8523 device - - pcf8563 Select the PCF8563 device -@@ -1067,10 +1069,14 @@ Params: abx80x Select o - - pcf2127 Select the PCF2127 device - -+ pcf2129 Select the PCF2129 device -+ - pcf8523 Select the PCF8523 device - - pcf8563 Select the PCF8563 device - -+ rv3028 Select the Micro Crystal RV3028 device -+ - addr Sets the address for the RTC. Note that the - device must be configured to use the specified - address. -@@ -1079,11 +1085,14 @@ Params: abx80x Select o - "schottky" (ABx80x only) - - trickle-resistor-ohms Resistor value for trickle charge (DS1339, -- ABx80x) -+ ABx80x, RV3028) - - wakeup-source Specify that the RTC can be used as a wakeup - source - -+ backup-switchover-mode Backup power supply switch mode. Must be 0 for -+ off or 1 for Vdd < VBackup (RV3028 only) -+ - i2c_gpio_sda GPIO used for I2C data (default "23") - - i2c_gpio_scl GPIO used for I2C clock (default "24") ---- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -@@ -121,7 +121,7 @@ - #size-cells = <0>; - status = "okay"; - -- pcf2127: pcf2127@51 { -+ pcf2127@51 { - compatible = "nxp,pcf2127"; - reg = <0x51>; - status = "okay"; -@@ -174,6 +174,36 @@ - }; - }; - -+ fragment@11 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ rv3028: rv3028@52 { -+ compatible = "microcrystal,rv3028"; -+ reg = <0x52>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@12 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf2129@51 { -+ compatible = "nxp,pcf2129"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ - __overrides__ { - abx80x = <0>,"+1"; - ds1307 = <0>,"+2"; -@@ -185,6 +215,8 @@ - pcf8523 = <0>,"+8"; - pcf8563 = <0>,"+9"; - m41t62 = <0>,"+10"; -+ rv3028 = <0>,"+11"; -+ pcf2129 = <0>,"+12"; - - addr = <&abx80x>, "reg:0", - <&ds1307>, "reg:0", -@@ -192,18 +224,19 @@ - <&ds3231>, "reg:0", - <&mcp7940x>, "reg:0", - <&mcp7941x>, "reg:0", -- <&pcf2127>, "reg:0", - <&pcf8523>, "reg:0", - <&pcf8563>, "reg:0", - <&m41t62>, "reg:0"; - - trickle-diode-type = <&abx80x>,"abracon,tc-diode"; - trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", -- <&abx80x>,"abracon,tc-resistor"; -+ <&abx80x>,"abracon,tc-resistor", -+ <&rv3028>,"trickle-resistor-ohms:0"; -+ backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; - wakeup-source = <&ds1339>,"wakeup-source?", - <&ds3231>,"wakeup-source?", - <&mcp7940x>,"wakeup-source?", -- <&mcp7941x>,"wakeup-source?"; -+ <&mcp7941x>,"wakeup-source?"; - i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; - i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; - i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; ---- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -@@ -105,7 +105,7 @@ - #size-cells = <0>; - status = "okay"; - -- pcf2127: pcf2127@51 { -+ pcf2127@51 { - compatible = "nxp,pcf2127"; - reg = <0x51>; - status = "okay"; -@@ -173,6 +173,21 @@ - }; - }; - -+ fragment@11 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf2129@51 { -+ compatible = "nxp,pcf2129"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ - __overrides__ { - abx80x = <0>,"+0"; - ds1307 = <0>,"+1"; -@@ -185,6 +200,7 @@ - pcf8563 = <0>,"+8"; - m41t62 = <0>,"+9"; - rv3028 = <0>,"+10"; -+ pcf2129 = <0>,"+11"; - - addr = <&abx80x>, "reg:0", - <&ds1307>, "reg:0", -@@ -192,7 +208,6 @@ - <&ds3231>, "reg:0", - <&mcp7940x>, "reg:0", - <&mcp7941x>, "reg:0", -- <&pcf2127>, "reg:0", - <&pcf8523>, "reg:0", - <&pcf8563>, "reg:0", - <&m41t62>, "reg:0"; diff --git a/target/linux/brcm2708/patches-4.19/950-0702-staging-bcm2835-codec-add-support-for-V4L2_CID_MPEG_.patch b/target/linux/brcm2708/patches-4.19/950-0702-staging-bcm2835-codec-add-support-for-V4L2_CID_MPEG_.patch new file mode 100644 index 0000000000..aabb005703 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0702-staging-bcm2835-codec-add-support-for-V4L2_CID_MPEG_.patch @@ -0,0 +1,55 @@ +From ae6dba510ac29ef7b0e6c838fb1bcc8b9eb474b7 Mon Sep 17 00:00:00 2001 +From: Aman Gupta +Date: Thu, 22 Aug 2019 22:31:37 +0000 +Subject: [PATCH] staging: bcm2835-codec: add support for + V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME + +fixes #3171 + +Signed-off-by: Aman Gupta +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 19 ++++++++++++++++++- + 1 file changed, 18 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -1587,6 +1587,20 @@ static int bcm2835_codec_s_ctrl(struct v + ret = bcm2835_codec_set_level_profile(ctx, ctrl); + break; + ++ case V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME: { ++ u32 mmal_bool = 1; ++ ++ if (!ctx->component) ++ break; ++ ++ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, ++ &ctx->component->output[0], ++ MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME, ++ &mmal_bool, ++ sizeof(mmal_bool)); ++ break; ++ } ++ + default: + v4l2_err(&ctx->dev->v4l2_dev, "Invalid control\n"); + return -EINVAL; +@@ -2311,7 +2325,7 @@ static int bcm2835_codec_open(struct fil + hdl = &ctx->hdl; + if (dev->role == ENCODE) { + /* Encode controls */ +- v4l2_ctrl_handler_init(hdl, 6); ++ v4l2_ctrl_handler_init(hdl, 7); + + v4l2_ctrl_new_std_menu(hdl, &bcm2835_codec_ctrl_ops, + V4L2_CID_MPEG_VIDEO_BITRATE_MODE, +@@ -2355,6 +2369,9 @@ static int bcm2835_codec_open(struct fil + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) | + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_HIGH)), + V4L2_MPEG_VIDEO_H264_PROFILE_HIGH); ++ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, ++ V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME, ++ 0, 0, 0, 0); + if (hdl->error) { + rc = hdl->error; + goto free_ctrl_handler; diff --git a/target/linux/brcm2708/patches-4.19/950-0703-staging-bcm2835-codec-remove-unnecessary-padding-on-.patch b/target/linux/brcm2708/patches-4.19/950-0703-staging-bcm2835-codec-remove-unnecessary-padding-on-.patch new file mode 100644 index 0000000000..3bdbb0b3aa --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0703-staging-bcm2835-codec-remove-unnecessary-padding-on-.patch @@ -0,0 +1,30 @@ +From 9a2eab654b11d27bcc5a32ebd374f6c9acc38ce4 Mon Sep 17 00:00:00 2001 +From: Aman Gupta +Date: Fri, 23 Aug 2019 16:29:07 -0700 +Subject: [PATCH] staging: bcm2835-codec: remove unnecessary padding on + encoder input + +The ISP and ENCODE roles have the same underlying hardware. Neither requires vertical alignment. + +Signed-off-by: Aman Gupta +--- + .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -1050,12 +1050,12 @@ static int vidioc_try_fmt(struct bcm2835 + f->fmt.pix_mp.height = MIN_H; + + /* +- * For codecs the buffer must have a vertical alignment of 16 ++ * For decoders the buffer must have a vertical alignment of 16 + * lines. + * The selection will reflect any cropping rectangle when only + * some of the pixels are active. + */ +- if (ctx->dev->role != ISP) ++ if (ctx->dev->role == DECODE) + f->fmt.pix_mp.height = ALIGN(f->fmt.pix_mp.height, 16); + } + f->fmt.pix_mp.num_planes = 1; diff --git a/target/linux/brcm2708/patches-4.19/950-0704-arm-dts-add-missing-Raspberry-Pi-model-names.patch b/target/linux/brcm2708/patches-4.19/950-0704-arm-dts-add-missing-Raspberry-Pi-model-names.patch new file mode 100644 index 0000000000..516e2a5147 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0704-arm-dts-add-missing-Raspberry-Pi-model-names.patch @@ -0,0 +1,58 @@ +From ac6c4a17f6f7aeb977b04dd4dc7e801b7776499f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Thu, 29 Aug 2019 16:26:22 +0200 +Subject: [PATCH] arm: dts: add missing Raspberry Pi model names +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is needed to identify the different models on distributions like OpenWrt. + +Signed-off-by: Álvaro Fernández Rojas +--- + arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi-cm.dts | 1 + + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 1 + + 4 files changed, 4 insertions(+) + +--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -6,6 +6,7 @@ + #include "bcm283x-rpi-csi1-2lane.dtsi" + + / { ++ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; + model = "Raspberry Pi Model B+"; + }; + +--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -6,6 +6,7 @@ + #include "bcm283x-rpi-csi1-2lane.dtsi" + + / { ++ compatible = "raspberrypi,model-b", "brcm,bcm2835"; + model = "Raspberry Pi Model B"; + }; + +--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +@@ -5,6 +5,7 @@ + #include "bcm283x-rpi-csi1-4lane.dtsi" + + / { ++ compatible = "raspberrypi,compute-module", "brcm,bcm2835"; + model = "Raspberry Pi Compute Module"; + }; + +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -6,6 +6,7 @@ + #include "bcm283x-rpi-csi1-4lane.dtsi" + + / { ++ compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; + model = "Raspberry Pi Compute Module 3"; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0704-overlays-dpi18-and-dpi24-vc4-compatibility.patch b/target/linux/brcm2708/patches-4.19/950-0704-overlays-dpi18-and-dpi24-vc4-compatibility.patch deleted file mode 100644 index 8b3c75c4de..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0704-overlays-dpi18-and-dpi24-vc4-compatibility.patch +++ /dev/null @@ -1,52 +0,0 @@ -From a5e0d604116189331d5608c9d128f37df17db2e3 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 16 Jul 2019 15:24:12 +0100 -Subject: [PATCH 704/806] overlays: dpi18 and dpi24 vc4 compatibility - -The dpi overlays use the fb device tree node as a place to hang the -necessary pinctrl changes. With one of the VC4 overlays loaded, the -fb node is disabled so the changes have no effect. - -Modify the overlays to also use the vc4 node, to cover both use -cases. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/dpi18-overlay.dts | 8 ++++++++ - arch/arm/boot/dts/overlays/dpi24-overlay.dts | 8 ++++++++ - 2 files changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/overlays/dpi18-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts -@@ -17,6 +17,14 @@ - }; - - fragment@1 { -+ target = <&vc4>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi18_pins>; -+ }; -+ }; -+ -+ fragment@2 { - target = <&gpio>; - __overlay__ { - dpi18_pins: dpi18_pins { ---- a/arch/arm/boot/dts/overlays/dpi24-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts -@@ -17,6 +17,14 @@ - }; - - fragment@1 { -+ target = <&vc4>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi24_pins>; -+ }; -+ }; -+ -+ fragment@2 { - target = <&gpio>; - __overlay__ { - dpi24_pins: dpi24_pins { diff --git a/target/linux/brcm2708/patches-4.19/950-0705-arch-arm-Add-model-string-to-cpuinfo.patch b/target/linux/brcm2708/patches-4.19/950-0705-arch-arm-Add-model-string-to-cpuinfo.patch new file mode 100644 index 0000000000..cd33961de1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0705-arch-arm-Add-model-string-to-cpuinfo.patch @@ -0,0 +1,36 @@ +From d9f55647637be79ff42cb85497e43ca8b9a69a7b Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 3 Sep 2019 18:16:56 +0100 +Subject: [PATCH] arch/arm: Add model string to cpuinfo + +Signed-off-by: Phil Elwell +--- + arch/arm/kernel/setup.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/kernel/setup.c ++++ b/arch/arm/kernel/setup.c +@@ -1238,6 +1238,8 @@ static int c_show(struct seq_file *m, vo + { + int i, j; + u32 cpuid; ++ struct device_node *np; ++ const char *model; + + for_each_online_cpu(i) { + /* +@@ -1297,6 +1299,14 @@ static int c_show(struct seq_file *m, vo + seq_printf(m, "Revision\t: %04x\n", system_rev); + seq_printf(m, "Serial\t\t: %s\n", system_serial); + ++ np = of_find_node_by_path("/"); ++ if (np) { ++ if (!of_property_read_string(np, "model", ++ &model)) ++ seq_printf(m, "Model\t\t: %s\n", model); ++ of_node_put(np); ++ } ++ + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0705-overlays-Add-i2c0-and-i2c1-for-regularity.patch b/target/linux/brcm2708/patches-4.19/950-0705-overlays-Add-i2c0-and-i2c1-for-regularity.patch deleted file mode 100644 index ba5383c86b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0705-overlays-Add-i2c0-and-i2c1-for-regularity.patch +++ /dev/null @@ -1,340 +0,0 @@ -From 9c0f4b3e3b197d5c81f4bd6679f2c2456ab45c9e Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 17 Jul 2019 10:08:55 +0100 -Subject: [PATCH 705/806] overlays: Add i2c0 and i2c1 for regularity - -The new i2c overlays for pi4 (i2c3, i2c4, i2c5, i2c6) have a -standardised interface that allows pin groups to be chosen -atomically rather than as individual pins. Add i2c0 and i2c1 -overlays to fit the naming scheme and parameter usage, deprecating -i2c0-bcm2708 and i2c1-bcm2708. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 2 + - arch/arm/boot/dts/overlays/README | 33 +++++--- - .../dts/overlays/i2c0-bcm2708-overlay.dts | 77 +++---------------- - arch/arm/boot/dts/overlays/i2c0-overlay.dts | 61 +++++++++++++++ - .../dts/overlays/i2c1-bcm2708-overlay.dts | 46 ++--------- - arch/arm/boot/dts/overlays/i2c1-overlay.dts | 44 +++++++++++ - 6 files changed, 147 insertions(+), 116 deletions(-) - create mode 100644 arch/arm/boot/dts/overlays/i2c0-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c1-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -66,7 +66,9 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - i2c-rtc.dtbo \ - i2c-rtc-gpio.dtbo \ - i2c-sensor.dtbo \ -+ i2c0.dtbo \ - i2c0-bcm2708.dtbo \ -+ i2c1.dtbo \ - i2c1-bcm2708.dtbo \ - i2c3.dtbo \ - i2c4.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1151,14 +1151,12 @@ Params: addr Set the - sensor - - --Name: i2c0-bcm2708 -+Name: i2c0 - Info: Change i2c0 pin usage. Not all pin combinations are usable on all - platforms - platforms other then Compute Modules can only use this - to disable transaction combining. --Load: dtoverlay=i2c0-bcm2708,= --Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) -- scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) -- pins_0_1 Use pins 0 and 1 (default) -+Load: dtoverlay=i2c0,= -+Params: pins_0_1 Use pins 0 and 1 (default) - pins_28_29 Use pins 28 and 29 - pins_44_45 Use pins 44 and 45 - pins_46_47 Use pins 46 and 47 -@@ -1166,18 +1164,33 @@ Params: sda0_pin GPIO pin - "yes") - - --Name: i2c1-bcm2708 -+Name: i2c0-bcm2708 -+Info: Deprecated, legacy version of i2c0, from which it inherits its -+ parameters, just adding the explicit individual pin specifiers. -+Load: -+Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) -+ scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) -+ -+ -+Name: i2c1 - Info: Change i2c1 pin usage. Not all pin combinations are usable on all - platforms - platforms other then Compute Modules can only use this - to disable transaction combining. --Info: Enable the i2c_bcm2708 driver for the i2c1 bus --Load: dtoverlay=i2c1-bcm2708,= -+Load: dtoverlay=i2c1,= -+Params: pins_2_3 Use pins 2 and 3 (default) -+ pins_44_45 Use pins 44 and 45 -+ combine Allow transactions to be combined (default -+ "yes") -+ -+ -+Name: i2c1-bcm2708 -+Info: Deprecated, legacy version of i2c1, from which it inherits its -+ parameters, just adding the explicit individual pin specifiers. -+Load: - Params: sda1_pin GPIO pin for SDA1 (2 or 44 - default 2) - scl1_pin GPIO pin for SCL1 (3 or 45 - default 3) - pin_func Alternative pin function (4 (alt0), 6 (alt2) - - default 4) -- combine Allow transactions to be combined (default -- "yes") - - - Name: i2c3 ---- a/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts -@@ -1,69 +1,14 @@ --/* -- * Device tree overlay for i2c_bcm2708, i2c0 bus -- * -- * Compile: -- * dtc -@ -I dts -O dtb -o i2c0-bcm2708-overlay.dtb i2c0-bcm2708-overlay.dts -- */ -- --/dts-v1/; --/plugin/; -+#include "i2c0-overlay.dts" - - /{ -- compatible = "brcm,bcm2835"; -- -- fragment@0 { -- target = <&i2c0>; -- __overlay__ { -- status = "okay"; -- }; -- }; -- -- fragment@1 { -- target = <&i2c0_pins>; -- frag1: __overlay__ { -- brcm,pins = <0 1>; -- brcm,function = <4>; /* alt0 */ -- }; -- }; -- -- fragment@2 { -- target = <&i2c0_pins>; -- __dormant__ { -- brcm,pins = <28 29>; -- brcm,function = <4>; /* alt0 */ -- }; -- }; -- -- fragment@3 { -- target = <&i2c0_pins>; -- __dormant__ { -- brcm,pins = <44 45>; -- brcm,function = <5>; /* alt1 */ -- }; -- }; -- -- fragment@4 { -- target = <&i2c0_pins>; -- __dormant__ { -- brcm,pins = <46 47>; -- brcm,function = <4>; /* alt0 */ -- }; -- }; -- -- fragment@5 { -- target = <&i2c0>; -- __dormant__ { -- compatible = "brcm,bcm2708-i2c"; -- }; -- }; -- -- __overrides__ { -- sda0_pin = <&frag1>,"brcm,pins:0"; -- scl0_pin = <&frag1>,"brcm,pins:4"; -- pins_0_1 = <0>,"+1-2-3-4"; -- pins_28_29 = <0>,"-1+2-3-4"; -- pins_44_45 = <0>,"-1-2+3-4"; -- pins_46_47 = <0>,"-1-2-3+4"; -- combine = <0>, "!5"; -- }; -+ __overrides__ { -+ sda0_pin = <&pins1>,"brcm,pins:0", -+ <&pins2>,"brcm,pins:0", -+ <&pins3>,"brcm,pins:0", -+ <&pins4>,"brcm,pins:0"; -+ scl0_pin = <&pins1>,"brcm,pins:4", -+ <&pins2>,"brcm,pins:4", -+ <&pins3>,"brcm,pins:4", -+ <&pins4>,"brcm,pins:4"; -+ }; - }; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c0-overlay.dts -@@ -0,0 +1,61 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c0>; -+ __overlay__ { -+ status = "okay"; -+ pinctrl-0 = <&i2c0_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c0_pins>; -+ pins1: __overlay__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c0_pins>; -+ pins2: __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c0_pins>; -+ pins3: __dormant__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c0_pins>; -+ pins4: __dormant__ { -+ brcm,pins = <46 47>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&i2c0>; -+ __dormant__ { -+ compatible = "brcm,bcm2708-i2c"; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_0_1 = <0>,"+1-2-3-4"; -+ pins_28_29 = <0>,"-1+2-3-4"; -+ pins_44_45 = <0>,"-1-2+3-4"; -+ pins_46_47 = <0>,"-1-2-3+4"; -+ combine = <0>, "!5"; -+ }; -+}; ---- a/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts -@@ -1,43 +1,9 @@ --/* -- * Device tree overlay for i2c_bcm2708, i2c1 bus -- * -- * Compile: -- * dtc -@ -I dts -O dtb -o i2c1-bcm2708-overlay.dtb i2c1-bcm2708-overlay.dts -- */ -- --/dts-v1/; --/plugin/; -+#include "i2c1-overlay.dts" - - /{ -- compatible = "brcm,bcm2835"; -- -- fragment@0 { -- target = <&i2c1>; -- __overlay__ { -- pinctrl-0 = <&i2c1_pins>; -- status = "okay"; -- }; -- }; -- -- fragment@1 { -- target = <&i2c1_pins>; -- pins: __overlay__ { -- brcm,pins = <2 3>; -- brcm,function = <4>; /* alt 0 */ -- }; -- }; -- -- fragment@2 { -- target = <&i2c1>; -- __dormant__ { -- compatible = "brcm,bcm2708-i2c"; -- }; -- }; -- -- __overrides__ { -- sda1_pin = <&pins>,"brcm,pins:0"; -- scl1_pin = <&pins>,"brcm,pins:4"; -- pin_func = <&pins>,"brcm,function:0"; -- combine = <0>, "!2"; -- }; -+ __overrides__ { -+ sda1_pin = <&pins1>,"brcm,pins:0", <&pins2>,"brcm,pins:0"; -+ scl1_pin = <&pins1>,"brcm,pins:4", <&pins1>,"brcm,pins:4"; -+ pin_func = <&pins1>,"brcm,function:0", <&pins2>,"brcm,function:0"; -+ }; - }; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c1-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1_pins>; -+ pins1: __overlay__ { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; /* alt 0 */ -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1_pins>; -+ pins2: __dormant__ { -+ brcm,pins = <44 45>; -+ brcm,function = <6>; /* alt 2 */ -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c1>; -+ __dormant__ { -+ compatible = "brcm,bcm2708-i2c"; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_2_3 = <0>,"=1!2"; -+ pins_44_45 = <0>,"!1=2"; -+ combine = <0>, "!3"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0706-Pisound-Remove-spinlock-usage-around-spi_sync.patch b/target/linux/brcm2708/patches-4.19/950-0706-Pisound-Remove-spinlock-usage-around-spi_sync.patch deleted file mode 100644 index 50803008e6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0706-Pisound-Remove-spinlock-usage-around-spi_sync.patch +++ /dev/null @@ -1,31 +0,0 @@ -From ace4e8240d581e6053f0165b2682a2db745d49dc Mon Sep 17 00:00:00 2001 -From: Giedrius -Date: Fri, 12 Jul 2019 17:45:55 +0300 -Subject: [PATCH 706/806] Pisound: Remove spinlock usage around spi_sync - ---- - sound/soc/bcm/pisound.c | 5 ----- - 1 file changed, 5 deletions(-) - ---- a/sound/soc/bcm/pisound.c -+++ b/sound/soc/bcm/pisound.c -@@ -286,9 +286,6 @@ static irqreturn_t data_available_interr - return IRQ_HANDLED; - } - --static DEFINE_SPINLOCK(spilock); --static unsigned long spilockflags; -- - static uint16_t spi_transfer16(uint16_t val) - { - uint8_t txbuf[2]; -@@ -333,9 +330,7 @@ static void spi_transfer(const uint8_t * - transfer.delay_usecs = 10; - spi_message_add_tail(&transfer, &msg); - -- spin_lock_irqsave(&spilock, spilockflags); - err = spi_sync(pisnd_spi_device, &msg); -- spin_unlock_irqrestore(&spilock, spilockflags); - - if (err < 0) { - printe("spi_sync error %d\n", err); diff --git a/target/linux/brcm2708/patches-4.19/950-0706-arch-arm64-Add-Revision-Serial-Model-to-cpuinfo.patch b/target/linux/brcm2708/patches-4.19/950-0706-arch-arm64-Add-Revision-Serial-Model-to-cpuinfo.patch new file mode 100644 index 0000000000..5e29b47e57 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0706-arch-arm64-Add-Revision-Serial-Model-to-cpuinfo.patch @@ -0,0 +1,58 @@ +From aabfcb0abbc34ca5f3c4b4f872123166eca2e100 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 3 Sep 2019 18:17:25 +0100 +Subject: [PATCH] arch/arm64: Add Revision, Serial, Model to cpuinfo + +Signed-off-by: Phil Elwell +--- + arch/arm64/kernel/cpuinfo.c | 25 +++++++++++++++++++++++++ + 1 file changed, 25 insertions(+) + +--- a/arch/arm64/kernel/cpuinfo.c ++++ b/arch/arm64/kernel/cpuinfo.c +@@ -27,6 +27,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -126,6 +127,10 @@ static int c_show(struct seq_file *m, vo + { + int i, j; + bool compat = personality(current->personality) == PER_LINUX32; ++ struct device_node *np; ++ const char *model; ++ const char *serial; ++ u32 revision; + + for_each_online_cpu(i) { + struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i); +@@ -177,6 +182,26 @@ static int c_show(struct seq_file *m, vo + seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr)); + } + ++ seq_printf(m, "Hardware\t: BCM2835\n"); ++ ++ np = of_find_node_by_path("/system"); ++ if (np) { ++ if (!of_property_read_u32(np, "linux,revision", &revision)) ++ seq_printf(m, "Revision\t: %04x\n", revision); ++ of_node_put(np); ++ } ++ ++ np = of_find_node_by_path("/"); ++ if (np) { ++ if (!of_property_read_string(np, "serial-number", ++ &serial)) ++ seq_printf(m, "Serial\t\t: %s\n", serial); ++ if (!of_property_read_string(np, "model", ++ &model)) ++ seq_printf(m, "Model\t\t: %s\n", model); ++ of_node_put(np); ++ } ++ + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0707-arm64-mm-Limit-the-DMA-zone-for-arm64.patch b/target/linux/brcm2708/patches-4.19/950-0707-arm64-mm-Limit-the-DMA-zone-for-arm64.patch deleted file mode 100644 index 1715165b68..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0707-arm64-mm-Limit-the-DMA-zone-for-arm64.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 2722f08c4c59901bd506184e2dcbbbd532aef0b3 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Tue, 16 Jul 2019 13:28:22 +0100 -Subject: [PATCH 707/806] arm64/mm: Limit the DMA zone for arm64 - -On RaspberryPi, only the first 1Gb can be used for DMA[1]. - -[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2019-July/665986.html - -Signed-off-by: Andrei Gherzan ---- - arch/arm64/mm/init.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/mm/init.c -+++ b/arch/arm64/mm/init.c -@@ -224,7 +224,7 @@ static void __init reserve_elfcorehdr(vo - static phys_addr_t __init max_zone_dma_phys(void) - { - phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32); -- return min(offset + (1ULL << 32), memblock_end_of_DRAM()); -+ return min(offset + (1ULL << 30), memblock_end_of_DRAM()); - } - - #ifdef CONFIG_NUMA diff --git a/target/linux/brcm2708/patches-4.19/950-0707-media-dt-bindings-Add-binding-for-the-Sony-IMX219-se.patch b/target/linux/brcm2708/patches-4.19/950-0707-media-dt-bindings-Add-binding-for-the-Sony-IMX219-se.patch new file mode 100644 index 0000000000..30fa9b3081 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0707-media-dt-bindings-Add-binding-for-the-Sony-IMX219-se.patch @@ -0,0 +1,77 @@ +From 2d8a780a994098f7c532b712abd7298e0bca5a12 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 28 Aug 2019 13:34:30 +0100 +Subject: [PATCH] media: dt-bindings: Add binding for the Sony IMX219 + sensor + +The IMX219 is an 8MPix CSI2 sensor, supporting 2 or 4 data lanes. +Document the binding for this device. + +Signed-off-by: Dave Stevenson +--- + .../devicetree/bindings/media/i2c/imx219.txt | 59 +++++++++++++++++++ + 1 file changed, 59 insertions(+) + create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/media/i2c/imx219.txt +@@ -0,0 +1,59 @@ ++* Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor ++ ++The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor with ++an active array size of 3280H x 2464V. It is programmable through I2C ++interface. The I2C address is fixed to 0x10 as per sensor data sheet. ++Image data is sent through MIPI CSI-2, which is configured as either 2 or 4 ++data lanes. ++ ++Required Properties: ++- compatible: value should be "sony,imx219" for imx219 sensor ++- reg: I2C bus address of the device ++- clocks: reference to the xclk input clock. ++- clock-names: should be "xclk". ++- DOVDD-supply: Digital I/O voltage supply, 1.8 volts ++- AVDD-supply: Analog voltage supply, 2.8 volts ++- DVDD-supply: Digital core voltage supply, 1.2 volts ++ ++Optional Properties: ++- xclr-gpios: reference to the GPIO connected to the xclr pin, if any. Must be ++ released after all supplies are applied. ++ This is an active high signal to the imx219. ++ ++The imx219 device node should contain one 'port' child node with ++an 'endpoint' subnode. For further reading on port node refer to ++Documentation/devicetree/bindings/media/video-interfaces.txt. ++ ++Endpoint node required properties for CSI-2 connection are: ++- remote-endpoint: a phandle to the bus receiver's endpoint node. ++- clock-lanes: should be set to <0> (clock lane on hardware lane 0) ++- data-lanes: should be set to <1 2>, or <1 2 3 4> (two or four lane CSI-2 ++ supported) ++ ++Example: ++ sensor@10 { ++ compatible = "sony,imx219"; ++ reg = <0x10>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ clocks = <&imx219_clk>; ++ clock-names = "xclk"; ++ xclr-gpios = <&gpio_sensor 0 0>; ++ DOVDD-supply = <&vgen4_reg>; /* 1.8v */ ++ AVDD-supply = <&vgen3_reg>; /* 2.8v */ ++ DVDD-supply = <&vgen2_reg>; /* 1.2v */ ++ ++ imx219_clk: camera-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24000000>; ++ }; ++ ++ port { ++ sensor_out: endpoint { ++ remote-endpoint = <&csiss_in>; ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ }; ++ }; ++ }; diff --git a/target/linux/brcm2708/patches-4.19/950-0708-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch b/target/linux/brcm2708/patches-4.19/950-0708-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch new file mode 100644 index 0000000000..70b9d54c4e --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0708-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch @@ -0,0 +1,1146 @@ +From 2186344c6d83ccd169e16c048c8b43aff95545e2 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 28 Aug 2019 13:34:49 +0100 +Subject: [PATCH] media: i2c: Add driver for Sony IMX219 sensor + +Adds a driver for the 8MPix Sony IMX219 CSI2 sensor. +Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver +currently only supports 2 lanes. +8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned) +@ 30fps are currently supported. + +Signed-off-by: Dave Stevenson +Tested-by: Kieran Bingham +--- + drivers/media/i2c/Kconfig | 11 + + drivers/media/i2c/Makefile | 1 + + drivers/media/i2c/imx219.c | 1093 ++++++++++++++++++++++++++++++++++++ + 3 files changed, 1105 insertions(+) + create mode 100644 drivers/media/i2c/imx219.c + +--- a/drivers/media/i2c/Kconfig ++++ b/drivers/media/i2c/Kconfig +@@ -597,6 +597,17 @@ config VIDEO_APTINA_PLL + config VIDEO_SMIAPP_PLL + tristate + ++config VIDEO_IMX219 ++ tristate "Sony IMX219 sensor support" ++ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API ++ depends on MEDIA_CAMERA_SUPPORT ++ help ++ This is a Video4Linux2 sensor driver for the Sony ++ IMX219 camera. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called imx219. ++ + config VIDEO_IMX258 + tristate "Sony IMX258 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API +--- a/drivers/media/i2c/Makefile ++++ b/drivers/media/i2c/Makefile +@@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o + obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o + obj-$(CONFIG_VIDEO_OV2659) += ov2659.o + obj-$(CONFIG_VIDEO_TC358743) += tc358743.o ++obj-$(CONFIG_VIDEO_IMX219) += imx219.o + obj-$(CONFIG_VIDEO_IMX258) += imx258.o + obj-$(CONFIG_VIDEO_IMX274) += imx274.o + +--- /dev/null ++++ b/drivers/media/i2c/imx219.c +@@ -0,0 +1,1093 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * A V4L2 driver for Sony IMX219 cameras. ++ * Copyright (C) 2019, Raspberry Pi (Trading) Ltd ++ * ++ * Based on Sony imx258 camera driver ++ * Copyright (C) 2018 Intel Corporation ++ * ++ * DT / fwnode changes, and regulator / GPIO control taken from ov5640.c ++ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. ++ * Copyright (C) 2014-2017 Mentor Graphics Inc. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define IMX219_REG_VALUE_08BIT 1 ++#define IMX219_REG_VALUE_16BIT 2 ++ ++#define IMX219_REG_MODE_SELECT 0x0100 ++#define IMX219_MODE_STANDBY 0x00 ++#define IMX219_MODE_STREAMING 0x01 ++ ++/* Chip ID */ ++#define IMX219_REG_CHIP_ID 0x0000 ++#define IMX219_CHIP_ID 0x0219 ++ ++/* V_TIMING internal */ ++#define IMX219_REG_VTS 0x0160 ++#define IMX219_VTS_15FPS 0x0dc6 ++#define IMX219_VTS_30FPS_1080P 0x06e3 ++#define IMX219_VTS_30FPS_BINNED 0x06e3 ++#define IMX219_VTS_MAX 0xffff ++ ++/*Frame Length Line*/ ++#define IMX219_FLL_MIN 0x08a6 ++#define IMX219_FLL_MAX 0xffff ++#define IMX219_FLL_STEP 1 ++#define IMX219_FLL_DEFAULT 0x0c98 ++ ++/* HBLANK control - read only */ ++#define IMX219_PPL_DEFAULT 5352 ++ ++/* Exposure control */ ++#define IMX219_REG_EXPOSURE 0x015a ++#define IMX219_EXPOSURE_MIN 4 ++#define IMX219_EXPOSURE_STEP 1 ++#define IMX219_EXPOSURE_DEFAULT 0x640 ++#define IMX219_EXPOSURE_MAX 65535 ++ ++/* Analog gain control */ ++#define IMX219_REG_ANALOG_GAIN 0x0157 ++#define IMX219_ANA_GAIN_MIN 0 ++#define IMX219_ANA_GAIN_MAX 232 ++#define IMX219_ANA_GAIN_STEP 1 ++#define IMX219_ANA_GAIN_DEFAULT 0x0 ++ ++/* Digital gain control */ ++#define IMX219_REG_DIGITAL_GAIN 0x0158 ++#define IMX219_DGTL_GAIN_MIN 0x0100 ++#define IMX219_DGTL_GAIN_MAX 0x0fff ++#define IMX219_DGTL_GAIN_DEFAULT 0x0100 ++#define IMX219_DGTL_GAIN_STEP 1 ++ ++/* Test Pattern Control */ ++#define IMX219_REG_TEST_PATTERN 0x0600 ++#define IMX219_TEST_PATTERN_DISABLE 0 ++#define IMX219_TEST_PATTERN_SOLID_COLOR 1 ++#define IMX219_TEST_PATTERN_COLOR_BARS 2 ++#define IMX219_TEST_PATTERN_GREY_COLOR 3 ++#define IMX219_TEST_PATTERN_PN9 4 ++ ++struct imx219_reg { ++ u16 address; ++ u8 val; ++}; ++ ++struct imx219_reg_list { ++ u32 num_of_regs; ++ const struct imx219_reg *regs; ++}; ++ ++/* Mode : resolution and related config&values */ ++struct imx219_mode { ++ /* Frame width */ ++ u32 width; ++ /* Frame height */ ++ u32 height; ++ ++ /* V-timing */ ++ u32 vts_def; ++ ++ /* Default register values */ ++ struct imx219_reg_list reg_list; ++}; ++ ++/* ++ * Register sets lifted off the i2C interface from the Raspberry Pi firmware ++ * driver. ++ * 3280x2464 = mode 2, 1920x1080 = mode 1, and 1640x1232 = mode 4. ++ */ ++static const struct imx219_reg mode_3280x2464_regs[] = { ++ {0x0100, 0x00}, ++ {0x30eb, 0x0c}, ++ {0x30eb, 0x05}, ++ {0x300a, 0xff}, ++ {0x300b, 0xff}, ++ {0x30eb, 0x05}, ++ {0x30eb, 0x09}, ++ {0x0114, 0x01}, ++ {0x0128, 0x00}, ++ {0x012a, 0x18}, ++ {0x012b, 0x00}, ++ {0x0164, 0x00}, ++ {0x0165, 0x00}, ++ {0x0166, 0x0c}, ++ {0x0167, 0xcf}, ++ {0x0168, 0x00}, ++ {0x0169, 0x00}, ++ {0x016a, 0x09}, ++ {0x016b, 0x9f}, ++ {0x016c, 0x0c}, ++ {0x016d, 0xd0}, ++ {0x016e, 0x09}, ++ {0x016f, 0xa0}, ++ {0x0170, 0x01}, ++ {0x0171, 0x01}, ++ {0x0174, 0x00}, ++ {0x0175, 0x00}, ++ {0x018c, 0x0a}, ++ {0x018d, 0x0a}, ++ {0x0301, 0x05}, ++ {0x0303, 0x01}, ++ {0x0304, 0x03}, ++ {0x0305, 0x03}, ++ {0x0306, 0x00}, ++ {0x0307, 0x39}, ++ {0x0309, 0x0a}, ++ {0x030b, 0x01}, ++ {0x030c, 0x00}, ++ {0x030d, 0x72}, ++ {0x0624, 0x0c}, ++ {0x0625, 0xd0}, ++ {0x0626, 0x09}, ++ {0x0627, 0xa0}, ++ {0x455e, 0x00}, ++ {0x471e, 0x4b}, ++ {0x4767, 0x0f}, ++ {0x4750, 0x14}, ++ {0x4540, 0x00}, ++ {0x47b4, 0x14}, ++ {0x4713, 0x30}, ++ {0x478b, 0x10}, ++ {0x478f, 0x10}, ++ {0x4793, 0x10}, ++ {0x4797, 0x0e}, ++ {0x479b, 0x0e}, ++ ++ {0x0172, 0x03}, ++ {0x0162, 0x0d}, ++ {0x0163, 0x78}, ++}; ++ ++static const struct imx219_reg mode_1920_1080_regs[] = { ++ {0x0100, 0x00}, ++ {0x30eb, 0x05}, ++ {0x30eb, 0x0c}, ++ {0x300a, 0xff}, ++ {0x300b, 0xff}, ++ {0x30eb, 0x05}, ++ {0x30eb, 0x09}, ++ {0x0114, 0x01}, ++ {0x0128, 0x00}, ++ {0x012a, 0x18}, ++ {0x012b, 0x00}, ++ {0x0162, 0x0d}, ++ {0x0163, 0x78}, ++ {0x0164, 0x02}, ++ {0x0165, 0xa8}, ++ {0x0166, 0x0a}, ++ {0x0167, 0x27}, ++ {0x0168, 0x02}, ++ {0x0169, 0xb4}, ++ {0x016a, 0x06}, ++ {0x016b, 0xeb}, ++ {0x016c, 0x07}, ++ {0x016d, 0x80}, ++ {0x016e, 0x04}, ++ {0x016f, 0x38}, ++ {0x0170, 0x01}, ++ {0x0171, 0x01}, ++ {0x0174, 0x00}, ++ {0x0175, 0x00}, ++ {0x018c, 0x0a}, ++ {0x018d, 0x0a}, ++ {0x0301, 0x05}, ++ {0x0303, 0x01}, ++ {0x0304, 0x03}, ++ {0x0305, 0x03}, ++ {0x0306, 0x00}, ++ {0x0307, 0x39}, ++ {0x0309, 0x0a}, ++ {0x030b, 0x01}, ++ {0x030c, 0x00}, ++ {0x030d, 0x72}, ++ {0x455e, 0x00}, ++ {0x471e, 0x4b}, ++ {0x4767, 0x0f}, ++ {0x4750, 0x14}, ++ {0x4540, 0x00}, ++ {0x47b4, 0x14}, ++ {0x4713, 0x30}, ++ {0x478b, 0x10}, ++ {0x478f, 0x10}, ++ {0x4793, 0x10}, ++ {0x4797, 0x0e}, ++ {0x479b, 0x0e}, ++ ++ {0x0172, 0x03}, ++ {0x0162, 0x0d}, ++ {0x0163, 0x78}, ++}; ++ ++static const struct imx219_reg mode_1640_1232_regs[] = { ++ {0x30eb, 0x0c}, ++ {0x30eb, 0x05}, ++ {0x300a, 0xff}, ++ {0x300b, 0xff}, ++ {0x30eb, 0x05}, ++ {0x30eb, 0x09}, ++ {0x0114, 0x01}, ++ {0x0128, 0x00}, ++ {0x012a, 0x18}, ++ {0x012b, 0x00}, ++ {0x0164, 0x00}, ++ {0x0165, 0x00}, ++ {0x0166, 0x0c}, ++ {0x0167, 0xcf}, ++ {0x0168, 0x00}, ++ {0x0169, 0x00}, ++ {0x016a, 0x09}, ++ {0x016b, 0x9f}, ++ {0x016c, 0x06}, ++ {0x016d, 0x68}, ++ {0x016e, 0x04}, ++ {0x016f, 0xd0}, ++ {0x0170, 0x01}, ++ {0x0171, 0x01}, ++ {0x0174, 0x01}, ++ {0x0175, 0x01}, ++ {0x018c, 0x0a}, ++ {0x018d, 0x0a}, ++ {0x0301, 0x05}, ++ {0x0303, 0x01}, ++ {0x0304, 0x03}, ++ {0x0305, 0x03}, ++ {0x0306, 0x00}, ++ {0x0307, 0x39}, ++ {0x0309, 0x0a}, ++ {0x030b, 0x01}, ++ {0x030c, 0x00}, ++ {0x030d, 0x72}, ++ {0x455e, 0x00}, ++ {0x471e, 0x4b}, ++ {0x4767, 0x0f}, ++ {0x4750, 0x14}, ++ {0x4540, 0x00}, ++ {0x47b4, 0x14}, ++ {0x4713, 0x30}, ++ {0x478b, 0x10}, ++ {0x478f, 0x10}, ++ {0x4793, 0x10}, ++ {0x4797, 0x0e}, ++ {0x479b, 0x0e}, ++ ++ {0x0172, 0x03}, ++ {0x0162, 0x0d}, ++ {0x0163, 0x78}, ++}; ++ ++static const char * const imx219_test_pattern_menu[] = { ++ "Disabled", ++ "Color Bars", ++ "Solid Color", ++ "Grey Color Bars", ++ "PN9" ++}; ++ ++static const int imx219_test_pattern_val[] = { ++ IMX219_TEST_PATTERN_DISABLE, ++ IMX219_TEST_PATTERN_COLOR_BARS, ++ IMX219_TEST_PATTERN_SOLID_COLOR, ++ IMX219_TEST_PATTERN_GREY_COLOR, ++ IMX219_TEST_PATTERN_PN9, ++}; ++ ++/* regulator supplies */ ++static const char * const imx219_supply_name[] = { ++ /* Supplies can be enabled in any order */ ++ "VANA", /* Analog (2.8V) supply */ ++ "VDIG", /* Digital Core (1.8V) supply */ ++ "VDDL", /* IF (1.2V) supply */ ++}; ++ ++#define IMX219_NUM_SUPPLIES ARRAY_SIZE(imx219_supply_name) ++ ++#define IMX219_XCLR_DELAY_MS 10 /* Initialisation delay after XCLR low->high */ ++ ++/* Mode configs */ ++static const struct imx219_mode supported_modes[] = { ++ { ++ /* 8MPix 15fps mode */ ++ .width = 3280, ++ .height = 2464, ++ .vts_def = IMX219_VTS_15FPS, ++ .reg_list = { ++ .num_of_regs = ARRAY_SIZE(mode_3280x2464_regs), ++ .regs = mode_3280x2464_regs, ++ }, ++ }, ++ { ++ /* 1080P 30fps cropped */ ++ .width = 1920, ++ .height = 1080, ++ .vts_def = IMX219_VTS_30FPS_1080P, ++ .reg_list = { ++ .num_of_regs = ARRAY_SIZE(mode_1920_1080_regs), ++ .regs = mode_1920_1080_regs, ++ }, ++ }, ++ { ++ /* 2x2 binned 30fps mode */ ++ .width = 1640, ++ .height = 1232, ++ .vts_def = IMX219_VTS_30FPS_BINNED, ++ .reg_list = { ++ .num_of_regs = ARRAY_SIZE(mode_1640_1232_regs), ++ .regs = mode_1640_1232_regs, ++ }, ++ }, ++}; ++ ++struct imx219 { ++ struct v4l2_subdev sd; ++ struct media_pad pad; ++ ++ struct v4l2_fwnode_endpoint ep; /* the parsed DT endpoint info */ ++ struct clk *xclk; /* system clock to IMX219 */ ++ u32 xclk_freq; ++ ++ struct gpio_desc *xclr_gpio; ++ struct regulator_bulk_data supplies[IMX219_NUM_SUPPLIES]; ++ ++ struct v4l2_ctrl_handler ctrl_handler; ++ /* V4L2 Controls */ ++ struct v4l2_ctrl *pixel_rate; ++ struct v4l2_ctrl *exposure; ++ ++ /* Current mode */ ++ const struct imx219_mode *mode; ++ ++ /* ++ * Mutex for serialized access: ++ * Protect sensor module set pad format and start/stop streaming safely. ++ */ ++ struct mutex mutex; ++ ++ int power_count; ++ /* Streaming on/off */ ++ bool streaming; ++}; ++ ++static inline struct imx219 *to_imx219(struct v4l2_subdev *_sd) ++{ ++ return container_of(_sd, struct imx219, sd); ++} ++ ++/* Read registers up to 2 at a time */ ++static int imx219_read_reg(struct imx219 *imx219, u16 reg, u32 len, u32 *val) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ struct i2c_msg msgs[2]; ++ u8 addr_buf[2] = { reg >> 8, reg & 0xff }; ++ u8 data_buf[4] = { 0, }; ++ int ret; ++ ++ if (len > 4) ++ return -EINVAL; ++ ++ /* Write register address */ ++ msgs[0].addr = client->addr; ++ msgs[0].flags = 0; ++ msgs[0].len = ARRAY_SIZE(addr_buf); ++ msgs[0].buf = addr_buf; ++ ++ /* Read data from register */ ++ msgs[1].addr = client->addr; ++ msgs[1].flags = I2C_M_RD; ++ msgs[1].len = len; ++ msgs[1].buf = &data_buf[4 - len]; ++ ++ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); ++ if (ret != ARRAY_SIZE(msgs)) ++ return -EIO; ++ ++ *val = get_unaligned_be32(data_buf); ++ ++ return 0; ++} ++ ++/* Write registers up to 2 at a time */ ++static int imx219_write_reg(struct imx219 *imx219, u16 reg, u32 len, u32 val) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ u8 buf[6]; ++ ++ if (len > 4) ++ return -EINVAL; ++ ++ put_unaligned_be16(reg, buf); ++ put_unaligned_be32(val << (8 * (4 - len)), buf + 2); ++ if (i2c_master_send(client, buf, len + 2) != len + 2) ++ return -EIO; ++ ++ return 0; ++} ++ ++/* Write a list of registers */ ++static int imx219_write_regs(struct imx219 *imx219, ++ const struct imx219_reg *regs, u32 len) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ unsigned int i; ++ int ret; ++ ++ for (i = 0; i < len; i++) { ++ ret = imx219_write_reg(imx219, regs[i].address, 1, regs[i].val); ++ if (ret) { ++ dev_err_ratelimited(&client->dev, ++ "Failed to write reg 0x%4.4x. error = %d\n", ++ regs[i].address, ret); ++ ++ return ret; ++ } ++ } ++ ++ return 0; ++} ++ ++/* Power/clock management functions */ ++static void imx219_power(struct imx219 *imx219, bool enable) ++{ ++ gpiod_set_value_cansleep(imx219->xclr_gpio, enable ? 1 : 0); ++} ++ ++static int imx219_set_power_on(struct imx219 *imx219) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ int ret; ++ ++ ret = clk_prepare_enable(imx219->xclk); ++ if (ret) { ++ dev_err(&client->dev, "%s: failed to enable clock\n", ++ __func__); ++ return ret; ++ } ++ ++ ret = regulator_bulk_enable(IMX219_NUM_SUPPLIES, ++ imx219->supplies); ++ if (ret) { ++ dev_err(&client->dev, "%s: failed to enable regulators\n", ++ __func__); ++ goto xclk_off; ++ } ++ ++ imx219_power(imx219, true); ++ msleep(IMX219_XCLR_DELAY_MS); ++ ++ return 0; ++xclk_off: ++ clk_disable_unprepare(imx219->xclk); ++ return ret; ++} ++ ++static void imx219_set_power_off(struct imx219 *imx219) ++{ ++ imx219_power(imx219, false); ++ regulator_bulk_disable(IMX219_NUM_SUPPLIES, imx219->supplies); ++ clk_disable_unprepare(imx219->xclk); ++} ++ ++static int imx219_set_power(struct imx219 *imx219, bool on) ++{ ++ int ret = 0; ++ ++ if (on) { ++ ret = imx219_set_power_on(imx219); ++ if (ret) ++ return ret; ++ } else { ++ imx219_set_power_off(imx219); ++ } ++ ++ return 0; ++} ++ ++/* Open sub-device */ ++static int imx219_s_power(struct v4l2_subdev *sd, int on) ++{ ++ struct imx219 *imx219 = to_imx219(sd); ++ int ret = 0; ++ ++ mutex_lock(&imx219->mutex); ++ ++ /* ++ * If the power count is modified from 0 to != 0 or from != 0 to 0, ++ * update the power state. ++ */ ++ if (imx219->power_count == !on) { ++ ret = imx219_set_power(imx219, !!on); ++ if (ret) ++ goto out; ++ } ++ ++ /* Update the power count. */ ++ imx219->power_count += on ? 1 : -1; ++ WARN_ON(imx219->power_count < 0); ++out: ++ mutex_unlock(&imx219->mutex); ++ ++ return ret; ++} ++ ++static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) ++{ ++ struct v4l2_mbus_framefmt *try_fmt = ++ v4l2_subdev_get_try_format(sd, fh->pad, 0); ++ ++ /* Initialize try_fmt */ ++ try_fmt->width = supported_modes[0].width; ++ try_fmt->height = supported_modes[0].height; ++ try_fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10; ++ try_fmt->field = V4L2_FIELD_NONE; ++ ++ return 0; ++} ++ ++static int imx219_set_ctrl(struct v4l2_ctrl *ctrl) ++{ ++ struct imx219 *imx219 = ++ container_of(ctrl->handler, struct imx219, ctrl_handler); ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ int ret = 0; ++ ++ /* ++ * Applying V4L2 control value only happens ++ * when power is up for streaming ++ */ ++ if (pm_runtime_get_if_in_use(&client->dev) == 0) ++ return 0; ++ ++ switch (ctrl->id) { ++ case V4L2_CID_ANALOGUE_GAIN: ++ ret = imx219_write_reg(imx219, IMX219_REG_ANALOG_GAIN, ++ IMX219_REG_VALUE_08BIT, ctrl->val); ++ break; ++ case V4L2_CID_EXPOSURE: ++ ret = imx219_write_reg(imx219, IMX219_REG_EXPOSURE, ++ IMX219_REG_VALUE_16BIT, ctrl->val); ++ break; ++ case V4L2_CID_DIGITAL_GAIN: ++ ret = imx219_write_reg(imx219, IMX219_REG_DIGITAL_GAIN, ++ IMX219_REG_VALUE_16BIT, ctrl->val); ++ break; ++ case V4L2_CID_TEST_PATTERN: ++ ret = imx219_write_reg(imx219, IMX219_REG_TEST_PATTERN, ++ IMX219_REG_VALUE_16BIT, ++ imx219_test_pattern_val[ctrl->val]); ++ break; ++ default: ++ dev_info(&client->dev, ++ "ctrl(id:0x%x,val:0x%x) is not handled\n", ++ ctrl->id, ctrl->val); ++ ret = -EINVAL; ++ break; ++ } ++ ++ pm_runtime_put(&client->dev); ++ ++ return ret; ++} ++ ++static const struct v4l2_ctrl_ops imx219_ctrl_ops = { ++ .s_ctrl = imx219_set_ctrl, ++}; ++ ++static int imx219_enum_mbus_code(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_mbus_code_enum *code) ++{ ++ /* Only one bayer order(GRBG) is supported */ ++ if (code->index > 0) ++ return -EINVAL; ++ ++ code->code = MEDIA_BUS_FMT_SBGGR10_1X10; ++ ++ return 0; ++} ++ ++static int imx219_enum_frame_size(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_frame_size_enum *fse) ++{ ++ if (fse->index >= ARRAY_SIZE(supported_modes)) ++ return -EINVAL; ++ ++ if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10) ++ return -EINVAL; ++ ++ fse->min_width = supported_modes[fse->index].width; ++ fse->max_width = fse->min_width; ++ fse->min_height = supported_modes[fse->index].height; ++ fse->max_height = fse->min_height; ++ ++ return 0; ++} ++ ++static void imx219_update_pad_format(const struct imx219_mode *mode, ++ struct v4l2_subdev_format *fmt) ++{ ++ fmt->format.width = mode->width; ++ fmt->format.height = mode->height; ++ fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10; ++ fmt->format.field = V4L2_FIELD_NONE; ++} ++ ++static int __imx219_get_pad_format(struct imx219 *imx219, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_format *fmt) ++{ ++ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) ++ fmt->format = *v4l2_subdev_get_try_format(&imx219->sd, cfg, ++ fmt->pad); ++ else ++ imx219_update_pad_format(imx219->mode, fmt); ++ ++ return 0; ++} ++ ++static int imx219_get_pad_format(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_format *fmt) ++{ ++ struct imx219 *imx219 = to_imx219(sd); ++ int ret; ++ ++ mutex_lock(&imx219->mutex); ++ ret = __imx219_get_pad_format(imx219, cfg, fmt); ++ mutex_unlock(&imx219->mutex); ++ ++ return ret; ++} ++ ++static int imx219_set_pad_format(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_format *fmt) ++{ ++ struct imx219 *imx219 = to_imx219(sd); ++ const struct imx219_mode *mode; ++ struct v4l2_mbus_framefmt *framefmt; ++ ++ mutex_lock(&imx219->mutex); ++ ++ /* Only one raw bayer(BGGR) order is supported */ ++ fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10; ++ ++ mode = v4l2_find_nearest_size(supported_modes, ++ ARRAY_SIZE(supported_modes), ++ width, height, ++ fmt->format.width, fmt->format.height); ++ imx219_update_pad_format(mode, fmt); ++ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { ++ framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); ++ *framefmt = fmt->format; ++ } else { ++ imx219->mode = mode; ++ } ++ ++ mutex_unlock(&imx219->mutex); ++ ++ return 0; ++} ++ ++/* Start streaming */ ++static int imx219_start_streaming(struct imx219 *imx219) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ const struct imx219_reg_list *reg_list; ++ int ret; ++ ++ /* Apply default values of current mode */ ++ reg_list = &imx219->mode->reg_list; ++ ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs); ++ if (ret) { ++ dev_err(&client->dev, "%s failed to set mode\n", __func__); ++ return ret; ++ } ++ ++ /* ++ * Set VTS appropriately for frame rate control. ++ * Currently fixed per mode. ++ */ ++ ret = imx219_write_reg(imx219, IMX219_REG_VTS, ++ IMX219_REG_VALUE_16BIT, imx219->mode->vts_def); ++ if (ret) ++ return ret; ++ ++ /* Apply customized values from user */ ++ ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler); ++ if (ret) ++ return ret; ++ ++ /* set stream on register */ ++ return imx219_write_reg(imx219, IMX219_REG_MODE_SELECT, ++ IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING); ++} ++ ++/* Stop streaming */ ++static int imx219_stop_streaming(struct imx219 *imx219) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ int ret; ++ ++ /* set stream off register */ ++ ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT, ++ IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY); ++ if (ret) ++ dev_err(&client->dev, "%s failed to set stream\n", __func__); ++ ++ /* ++ * Return success even if it was an error, as there is nothing the ++ * caller can do about it. ++ */ ++ return 0; ++} ++ ++static int imx219_set_stream(struct v4l2_subdev *sd, int enable) ++{ ++ struct imx219 *imx219 = to_imx219(sd); ++ struct i2c_client *client = v4l2_get_subdevdata(sd); ++ int ret = 0; ++ ++ mutex_lock(&imx219->mutex); ++ if (imx219->streaming == enable) { ++ mutex_unlock(&imx219->mutex); ++ return 0; ++ } ++ ++ if (enable) { ++ ret = pm_runtime_get_sync(&client->dev); ++ if (ret < 0) { ++ pm_runtime_put_noidle(&client->dev); ++ goto err_unlock; ++ } ++ ++ /* ++ * Apply default & customized values ++ * and then start streaming. ++ */ ++ ret = imx219_start_streaming(imx219); ++ if (ret) { ++ pm_runtime_put(&client->dev); ++ goto err_unlock; ++ } ++ } else { ++ imx219_stop_streaming(imx219); ++ pm_runtime_put(&client->dev); ++ } ++ ++ imx219->streaming = enable; ++ mutex_unlock(&imx219->mutex); ++ ++ return ret; ++ ++err_unlock: ++ mutex_unlock(&imx219->mutex); ++ ++ return ret; ++} ++ ++static int __maybe_unused imx219_suspend(struct device *dev) ++{ ++ struct i2c_client *client = to_i2c_client(dev); ++ struct v4l2_subdev *sd = i2c_get_clientdata(client); ++ struct imx219 *imx219 = to_imx219(sd); ++ ++ if (imx219->streaming) ++ imx219_stop_streaming(imx219); ++ ++ return 0; ++} ++ ++static int __maybe_unused imx219_resume(struct device *dev) ++{ ++ struct i2c_client *client = to_i2c_client(dev); ++ struct v4l2_subdev *sd = i2c_get_clientdata(client); ++ struct imx219 *imx219 = to_imx219(sd); ++ int ret; ++ ++ if (imx219->streaming) { ++ ret = imx219_start_streaming(imx219); ++ if (ret) ++ goto error; ++ } ++ ++ return 0; ++ ++error: ++ imx219_stop_streaming(imx219); ++ imx219->streaming = 0; ++ return ret; ++} ++ ++static int imx219_get_regulators(struct imx219 *imx219) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ int i; ++ ++ for (i = 0; i < IMX219_NUM_SUPPLIES; i++) ++ imx219->supplies[i].supply = imx219_supply_name[i]; ++ ++ return devm_regulator_bulk_get(&client->dev, ++ IMX219_NUM_SUPPLIES, ++ imx219->supplies); ++} ++ ++/* Verify chip ID */ ++static int imx219_identify_module(struct imx219 *imx219) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ int ret; ++ u32 val; ++ ++ ret = imx219_set_power_on(imx219); ++ if (ret) ++ return ret; ++ ++ ret = imx219_read_reg(imx219, IMX219_REG_CHIP_ID, ++ IMX219_REG_VALUE_16BIT, &val); ++ if (ret) { ++ dev_err(&client->dev, "failed to read chip id %x\n", ++ IMX219_CHIP_ID); ++ goto power_off; ++ } ++ ++ if (val != IMX219_CHIP_ID) { ++ dev_err(&client->dev, "chip id mismatch: %x!=%x\n", ++ IMX219_CHIP_ID, val); ++ ret = -EIO; ++ } ++ ++power_off: ++ imx219_set_power_off(imx219); ++ return ret; ++} ++ ++static const struct v4l2_subdev_core_ops imx219_core_ops = { ++ .s_power = imx219_s_power, ++}; ++ ++static const struct v4l2_subdev_video_ops imx219_video_ops = { ++ .s_stream = imx219_set_stream, ++}; ++ ++static const struct v4l2_subdev_pad_ops imx219_pad_ops = { ++ .enum_mbus_code = imx219_enum_mbus_code, ++ .get_fmt = imx219_get_pad_format, ++ .set_fmt = imx219_set_pad_format, ++ .enum_frame_size = imx219_enum_frame_size, ++}; ++ ++static const struct v4l2_subdev_ops imx219_subdev_ops = { ++ .core = &imx219_core_ops, ++ .video = &imx219_video_ops, ++ .pad = &imx219_pad_ops, ++}; ++ ++static const struct v4l2_subdev_internal_ops imx219_internal_ops = { ++ .open = imx219_open, ++}; ++ ++/* Initialize control handlers */ ++static int imx219_init_controls(struct imx219 *imx219) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); ++ struct v4l2_ctrl_handler *ctrl_hdlr; ++ int ret; ++ ++ ctrl_hdlr = &imx219->ctrl_handler; ++ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8); ++ if (ret) ++ return ret; ++ ++ mutex_init(&imx219->mutex); ++ ctrl_hdlr->lock = &imx219->mutex; ++ ++ imx219->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, ++ V4L2_CID_EXPOSURE, ++ IMX219_EXPOSURE_MIN, ++ IMX219_EXPOSURE_MAX, ++ IMX219_EXPOSURE_STEP, ++ IMX219_EXPOSURE_DEFAULT); ++ ++ v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, ++ IMX219_ANA_GAIN_MIN, IMX219_ANA_GAIN_MAX, ++ IMX219_ANA_GAIN_STEP, IMX219_ANA_GAIN_DEFAULT); ++ ++ v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_DIGITAL_GAIN, ++ IMX219_DGTL_GAIN_MIN, IMX219_DGTL_GAIN_MAX, ++ IMX219_DGTL_GAIN_STEP, IMX219_DGTL_GAIN_DEFAULT); ++ ++ v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx219_ctrl_ops, ++ V4L2_CID_TEST_PATTERN, ++ ARRAY_SIZE(imx219_test_pattern_menu) - 1, ++ 0, 0, imx219_test_pattern_menu); ++ ++ if (ctrl_hdlr->error) { ++ ret = ctrl_hdlr->error; ++ dev_err(&client->dev, "%s control init failed (%d)\n", ++ __func__, ret); ++ goto error; ++ } ++ ++ imx219->sd.ctrl_handler = ctrl_hdlr; ++ ++ return 0; ++ ++error: ++ v4l2_ctrl_handler_free(ctrl_hdlr); ++ mutex_destroy(&imx219->mutex); ++ ++ return ret; ++} ++ ++static void imx219_free_controls(struct imx219 *imx219) ++{ ++ v4l2_ctrl_handler_free(imx219->sd.ctrl_handler); ++ mutex_destroy(&imx219->mutex); ++} ++ ++static int imx219_probe(struct i2c_client *client, ++ const struct i2c_device_id *id) ++{ ++ struct device *dev = &client->dev; ++ struct fwnode_handle *endpoint; ++ struct imx219 *imx219; ++ int ret; ++ ++ imx219 = devm_kzalloc(&client->dev, sizeof(*imx219), GFP_KERNEL); ++ if (!imx219) ++ return -ENOMEM; ++ ++ /* Initialize subdev */ ++ v4l2_i2c_subdev_init(&imx219->sd, client, &imx219_subdev_ops); ++ ++ /* Get CSI2 bus config */ ++ endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), ++ NULL); ++ if (!endpoint) { ++ dev_err(dev, "endpoint node not found\n"); ++ return -EINVAL; ++ } ++ ++ ret = v4l2_fwnode_endpoint_parse(endpoint, &imx219->ep); ++ fwnode_handle_put(endpoint); ++ if (ret) { ++ dev_err(dev, "Could not parse endpoint\n"); ++ return ret; ++ } ++ ++ /* Get system clock (xclk) */ ++ imx219->xclk = devm_clk_get(dev, "xclk"); ++ if (IS_ERR(imx219->xclk)) { ++ dev_err(dev, "failed to get xclk\n"); ++ return PTR_ERR(imx219->xclk); ++ } ++ ++ imx219->xclk_freq = clk_get_rate(imx219->xclk); ++ if (imx219->xclk_freq != 24000000) { ++ dev_err(dev, "xclk frequency not supported: %d Hz\n", ++ imx219->xclk_freq); ++ return -EINVAL; ++ } ++ ++ ret = imx219_get_regulators(imx219); ++ if (ret) ++ return ret; ++ ++ /* request optional power down pin */ ++ imx219->xclr_gpio = devm_gpiod_get_optional(dev, "xclr", ++ GPIOD_OUT_HIGH); ++ ++ /* Check module identity */ ++ ret = imx219_identify_module(imx219); ++ if (ret) ++ return ret; ++ ++ /* Set default mode to max resolution */ ++ imx219->mode = &supported_modes[0]; ++ ++ ret = imx219_init_controls(imx219); ++ if (ret) ++ return ret; ++ ++ /* Initialize subdev */ ++ imx219->sd.internal_ops = &imx219_internal_ops; ++ imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; ++ imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; ++ ++ /* Initialize source pad */ ++ imx219->pad.flags = MEDIA_PAD_FL_SOURCE; ++ ++ ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad); ++ if (ret) ++ goto error_handler_free; ++ ++ ret = v4l2_async_register_subdev_sensor_common(&imx219->sd); ++ if (ret < 0) ++ goto error_media_entity; ++ ++ pm_runtime_set_active(&client->dev); ++ pm_runtime_enable(&client->dev); ++ pm_runtime_idle(&client->dev); ++ ++ return 0; ++ ++error_media_entity: ++ media_entity_cleanup(&imx219->sd.entity); ++ ++error_handler_free: ++ imx219_free_controls(imx219); ++ ++ return ret; ++} ++ ++static int imx219_remove(struct i2c_client *client) ++{ ++ struct v4l2_subdev *sd = i2c_get_clientdata(client); ++ struct imx219 *imx219 = to_imx219(sd); ++ ++ v4l2_async_unregister_subdev(sd); ++ media_entity_cleanup(&sd->entity); ++ imx219_free_controls(imx219); ++ ++ pm_runtime_disable(&client->dev); ++ pm_runtime_set_suspended(&client->dev); ++ ++ return 0; ++} ++ ++static const struct of_device_id imx219_dt_ids[] = { ++ { .compatible = "sony,imx219" }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, imx219_dt_ids); ++ ++static struct i2c_driver imx219_i2c_driver = { ++ .driver = { ++ .name = "imx219", ++ .of_match_table = imx219_dt_ids, ++ }, ++ .probe = imx219_probe, ++ .remove = imx219_remove, ++}; ++ ++module_i2c_driver(imx219_i2c_driver); ++ ++MODULE_AUTHOR("Dave Stevenson +Date: Wed, 28 Aug 2019 13:35:19 +0100 +Subject: [PATCH] dtoverlays: Add overlay for the Sony IMX219 image + sensor. + +Adds an overlay for the IMX219 image sensor, connected to the +Unicam CSI2 receiver peripheral. + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 12 ++ + arch/arm/boot/dts/overlays/imx219-overlay.dts | 129 ++++++++++++++++++ + 3 files changed, 142 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/imx219-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -77,6 +77,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + i2c6.dtbo \ + i2s-gpio28-31.dtbo \ + ilitek251x.dtbo \ ++ imx219.dtbo \ + iqaudio-codec.dtbo \ + iqaudio-dac.dtbo \ + iqaudio-dacplus.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1269,6 +1269,18 @@ Params: interrupt GPIO use + touchscreen (in pixels) + + ++Name: imx219 ++Info: Sony IMX219 camera module. ++ Uses Unicam 1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=imx219,= ++Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. ++ Useful on Compute Modules. ++ ++ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. ++ This is required for Pi B+, 2, 0, and 0W. ++ ++ + Name: iqaudio-codec + Info: Configures the IQaudio Codec audio card + Load: dtoverlay=iqaudio-codec +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/imx219-overlay.dts +@@ -0,0 +1,129 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++// Definitions for IMX219 camera module on VC I2C bus ++/dts-v1/; ++/plugin/; ++ ++#include ++ ++/{ ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&i2c_vc>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ imx219: imx219@10 { ++ compatible = "sony,imx219"; ++ reg = <0x10>; ++ status = "okay"; ++ ++ clocks = <&imx219_clk>; ++ clock-names = "xclk"; ++ ++ VANA-supply = <&imx219_vana>; /* 2.8v */ ++ VDIG-supply = <&imx219_vdig>; /* 1.8v */ ++ VDDL-supply = <&imx219_vddl>; /* 1.2v */ ++ ++ imx219_clk: camera-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24000000>; ++ }; ++ ++ port { ++ imx219_0: endpoint { ++ remote-endpoint = <&csi1_ep>; ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ clock-noncontinuous; ++ link-frequencies = ++ /bits/ 64 <297000000>; ++ }; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&csi1>; ++ __overlay__ { ++ status = "okay"; ++ ++ port { ++ csi1_ep: endpoint { ++ remote-endpoint = <&imx219_0>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <28 29>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ fragment@3 { ++ target = <&i2c0_pins>; ++ __overlay__ { ++ brcm,pins = <44 45>; ++ brcm,function = <5>; /* alt1 */ ++ }; ++ }; ++ fragment@4 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ fragment@5 { ++ target = <&i2c_vc>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@6 { ++ target-path="/"; ++ __overlay__ { ++ imx219_vana: fixedregulator@0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "imx219_vana"; ++ regulator-min-microvolt = <2800000>; ++ regulator-max-microvolt = <2800000>; ++ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ imx219_vdig: fixedregulator@1 { ++ compatible = "regulator-fixed"; ++ regulator-name = "imx219_vdig"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ }; ++ imx219_vddl: fixedregulator@2 { ++ compatible = "regulator-fixed"; ++ regulator-name = "imx219_vddl"; ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ }; ++ }; ++ }; ++ ++ fragment@7 { ++ target-path="/__overrides__"; ++ __overlay__ { ++ cam0-pwdn-ctrl = <&imx219_vana>,"gpio:0"; ++ cam0-pwdn = <&imx219_vana>,"gpio:4"; ++ }; ++ }; ++ ++ __overrides__ { ++ i2c_pins_0_1 = <0>,"-2-3+4"; ++ i2c_pins_28_29 = <0>,"+2-3-4"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.19/950-0710-drm-vc4-Query-firmware-for-custom-HDMI-mode.patch b/target/linux/brcm2708/patches-4.19/950-0710-drm-vc4-Query-firmware-for-custom-HDMI-mode.patch deleted file mode 100644 index af49437cc2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0710-drm-vc4-Query-firmware-for-custom-HDMI-mode.patch +++ /dev/null @@ -1,194 +0,0 @@ -From 5620f5eda349027a6e00e23391bc59617d25b449 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 3 Jul 2019 17:44:53 +0100 -Subject: [PATCH 710/806] drm/vc4: Query firmware for custom HDMI mode - -Allow custom HDMI modes to be specified from config.txt, -and these then override EDID parsing. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 142 ++++++++++++++----------- - 1 file changed, 81 insertions(+), 61 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -1035,6 +1035,58 @@ vc4_fkms_connector_detect(struct drm_con - return connector_status_connected; - } - -+/* Queries the firmware to populate a drm_mode structure for this display */ -+static int vc4_fkms_get_fw_mode(struct vc4_fkms_connector *fkms_connector, -+ struct drm_display_mode *mode) -+{ -+ struct vc4_dev *vc4 = fkms_connector->vc4_dev; -+ struct set_timings timings = { 0 }; -+ int ret; -+ -+ timings.display = fkms_connector->display_number; -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_GET_DISPLAY_TIMING, &timings, -+ sizeof(timings)); -+ if (ret || !timings.clock) -+ /* No mode returned - abort */ -+ return -1; -+ -+ /* Equivalent to DRM_MODE macro. */ -+ memset(mode, 0, sizeof(*mode)); -+ strncpy(mode->name, "FIXED_MODE", sizeof(mode->name)); -+ mode->status = 0; -+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; -+ mode->clock = timings.clock; -+ mode->hdisplay = timings.hdisplay; -+ mode->hsync_start = timings.hsync_start; -+ mode->hsync_end = timings.hsync_end; -+ mode->htotal = timings.htotal; -+ mode->hskew = 0; -+ mode->vdisplay = timings.vdisplay; -+ mode->vsync_start = timings.vsync_start; -+ mode->vsync_end = timings.vsync_end; -+ mode->vtotal = timings.vtotal; -+ mode->vscan = timings.vscan; -+ -+ if (timings.flags & TIMINGS_FLAGS_H_SYNC_POS) -+ mode->flags |= DRM_MODE_FLAG_PHSYNC; -+ else -+ mode->flags |= DRM_MODE_FLAG_NHSYNC; -+ -+ if (timings.flags & TIMINGS_FLAGS_V_SYNC_POS) -+ mode->flags |= DRM_MODE_FLAG_PVSYNC; -+ else -+ mode->flags |= DRM_MODE_FLAG_NVSYNC; -+ -+ if (timings.flags & TIMINGS_FLAGS_INTERLACE) -+ mode->flags |= DRM_MODE_FLAG_INTERLACE; -+ -+ mode->base.type = DRM_MODE_OBJECT_MODE; -+ -+ return 0; -+} -+ - static int vc4_fkms_get_edid_block(void *data, u8 *buf, unsigned int block, - size_t len) - { -@@ -1063,30 +1115,40 @@ static int vc4_fkms_connector_get_modes( - to_vc4_fkms_connector(connector); - struct drm_encoder *encoder = fkms_connector->encoder; - struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); -- int ret = 0; -+ struct drm_display_mode fw_mode; -+ struct drm_display_mode *mode; - struct edid *edid; -+ int num_modes; - -- edid = drm_do_get_edid(connector, vc4_fkms_get_edid_block, -- fkms_connector); -+ if (!vc4_fkms_get_fw_mode(fkms_connector, &fw_mode)) { -+ drm_mode_debug_printmodeline(&fw_mode); -+ mode = drm_mode_duplicate(connector->dev, -+ &fw_mode); -+ drm_mode_probed_add(connector, mode); -+ num_modes = 1; /* 1 mode */ -+ } else { -+ edid = drm_do_get_edid(connector, vc4_fkms_get_edid_block, -+ fkms_connector); - -- /* FIXME: Can we do CEC? -- * cec_s_phys_addr_from_edid(vc4->hdmi->cec_adap, edid); -- * if (!edid) -- * return -ENODEV; -- */ -- -- vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid); -- -- if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { -- vc4_encoder->rgb_range_selectable = -- drm_rgb_quant_range_selectable(edid); -+ /* FIXME: Can we do CEC? -+ * cec_s_phys_addr_from_edid(vc4->hdmi->cec_adap, edid); -+ * if (!edid) -+ * return -ENODEV; -+ */ -+ -+ vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid); -+ -+ if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { -+ vc4_encoder->rgb_range_selectable = -+ drm_rgb_quant_range_selectable(edid); -+ } -+ -+ drm_connector_update_edid_property(connector, edid); -+ num_modes = drm_add_edid_modes(connector, edid); -+ kfree(edid); - } - -- drm_connector_update_edid_property(connector, edid); -- ret = drm_add_edid_modes(connector, edid); -- kfree(edid); -- -- return ret; -+ return num_modes; - } - - /* This is the DSI panel resolution. Use this as a default should the firmware -@@ -1104,57 +1166,15 @@ static int vc4_fkms_lcd_connector_get_mo - { - struct vc4_fkms_connector *fkms_connector = - to_vc4_fkms_connector(connector); -- struct vc4_dev *vc4 = fkms_connector->vc4_dev; - struct drm_display_mode *mode; -- struct mailbox_set_mode mb = { -- .tag1 = { RPI_FIRMWARE_GET_DISPLAY_TIMING, -- sizeof(struct set_timings), 0}, -- .timings = { .display = fkms_connector->display_number }, -- }; - struct drm_display_mode fw_mode; -- int ret = 0; -- -- ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); -- if (!ret) { -- /* Equivalent to DRM_MODE macro. */ -- memset(&fw_mode, 0, sizeof(fw_mode)); -- strncpy(fw_mode.name, "LCD_MODE", sizeof(fw_mode.name)); -- fw_mode.status = 0; -- fw_mode.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; -- fw_mode.clock = mb.timings.clock; -- fw_mode.hdisplay = mb.timings.hdisplay; -- fw_mode.hsync_start = mb.timings.hsync_start; -- fw_mode.hsync_end = mb.timings.hsync_end; -- fw_mode.htotal = mb.timings.htotal; -- fw_mode.hskew = 0; -- fw_mode.vdisplay = mb.timings.vdisplay; -- fw_mode.vsync_start = mb.timings.vsync_start; -- fw_mode.vsync_end = mb.timings.vsync_end; -- fw_mode.vtotal = mb.timings.vtotal; -- fw_mode.vscan = mb.timings.vscan; -- if (mb.timings.flags & TIMINGS_FLAGS_H_SYNC_POS) -- fw_mode.flags |= DRM_MODE_FLAG_PHSYNC; -- else -- fw_mode.flags |= DRM_MODE_FLAG_NHSYNC; -- if (mb.timings.flags & TIMINGS_FLAGS_V_SYNC_POS) -- fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; -- else -- fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; -- if (mb.timings.flags & TIMINGS_FLAGS_V_SYNC_POS) -- fw_mode.flags |= DRM_MODE_FLAG_PVSYNC; -- else -- fw_mode.flags |= DRM_MODE_FLAG_NVSYNC; -- if (mb.timings.flags & TIMINGS_FLAGS_INTERLACE) -- fw_mode.flags |= DRM_MODE_FLAG_INTERLACE; -- -- fw_mode.base.type = DRM_MODE_OBJECT_MODE; - -+ if (!vc4_fkms_get_fw_mode(fkms_connector, &fw_mode) && fw_mode.clock) - mode = drm_mode_duplicate(connector->dev, - &fw_mode); -- } else { -+ else - mode = drm_mode_duplicate(connector->dev, - &lcd_mode); -- } - - if (!mode) { - DRM_ERROR("Failed to create a new display mode\n"); diff --git a/target/linux/brcm2708/patches-4.19/950-0710-staging-bcm2835-codec-Fix-non-documentation-comment-.patch b/target/linux/brcm2708/patches-4.19/950-0710-staging-bcm2835-codec-Fix-non-documentation-comment-.patch new file mode 100644 index 0000000000..116d16899c --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0710-staging-bcm2835-codec-Fix-non-documentation-comment-.patch @@ -0,0 +1,27 @@ +From d4fc8b1d50522b416baeb1d1f5e5498000af5a7f Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Sun, 28 Apr 2019 12:15:35 +0200 +Subject: [PATCH] staging: bcm2835-codec: Fix non-documentation comment + block + +The job_ready comment is incorrectly using the documentation prefix +(/**) which causes a warning at build time. + +Simplify it. + +Signed-off-by: Kieran Bingham +--- + .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -557,7 +557,7 @@ static struct vchiq_mmal_port *get_port_ + * mem2mem callbacks + */ + +-/** ++/* + * job_ready() - check whether an instance is ready to be scheduled to run + */ + static int job_ready(void *priv) diff --git a/target/linux/brcm2708/patches-4.19/950-0711-drm-vc4-Pass-the-drm-vrefresh-to-the-firmware-on-mod.patch b/target/linux/brcm2708/patches-4.19/950-0711-drm-vc4-Pass-the-drm-vrefresh-to-the-firmware-on-mod.patch deleted file mode 100644 index ec8a468d63..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0711-drm-vc4-Pass-the-drm-vrefresh-to-the-firmware-on-mod.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 2c0bfade955e4e660941db287020d06c9e22267f Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 11 Jul 2019 15:12:05 +0100 -Subject: [PATCH 711/806] drm/vc4: Pass the drm vrefresh to the firmware on - mode set - -More for completeness than need, but use drm_mode_vrefresh -to compute the vrefresh value, and pass that down to the -firmware on mode set. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -737,8 +737,8 @@ static void vc4_crtc_mode_set_nofb(struc - mode->hdisplay, mode->hsync_start, mode->hsync_end, - mode->htotal, mode->hskew, mode->vdisplay, - mode->vsync_start, mode->vsync_end, mode->vtotal, -- mode->vscan, mode->vrefresh, mode->picture_aspect_ratio, -- mode->flags); -+ mode->vscan, drm_mode_vrefresh(mode), -+ mode->picture_aspect_ratio, mode->flags); - mb.timings.display = vc4_crtc->display_number; - - mb.timings.video_id_code = frame.avi.video_code; -@@ -754,7 +754,7 @@ static void vc4_crtc_mode_set_nofb(struc - mb.timings.vsync_end = mode->vsync_end; - mb.timings.vtotal = mode->vtotal; - mb.timings.vscan = mode->vscan; -- mb.timings.vrefresh = 0; -+ mb.timings.vrefresh = drm_mode_vrefresh(mode); - mb.timings.flags = 0; - if (mode->flags & DRM_MODE_FLAG_PHSYNC) - mb.timings.flags |= TIMINGS_FLAGS_H_SYNC_POS; diff --git a/target/linux/brcm2708/patches-4.19/950-0711-staging-bcm2835-codec-Fix-declaration-of-roles.patch b/target/linux/brcm2708/patches-4.19/950-0711-staging-bcm2835-codec-Fix-declaration-of-roles.patch new file mode 100644 index 0000000000..05ea839e00 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0711-staging-bcm2835-codec-Fix-declaration-of-roles.patch @@ -0,0 +1,26 @@ +From 2d17824e8e5b2b6a6b830b8fe26c71a7d396f760 Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Wed, 20 Mar 2019 11:42:39 +0000 +Subject: [PATCH] staging: bcm2835-codec: Fix declaration of roles + +The static role text is declared incorrectly. The static should be +first, and the roles should also be constified. + +Convert from "const static char *" to "static const char * const". + +Signed-off-by: Kieran Bingham +--- + .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -77,7 +77,7 @@ enum bcm2835_codec_role { + ISP, + }; + +-const static char *roles[] = { ++static const char * const roles[] = { + "decode", + "encode", + "isp" diff --git a/target/linux/brcm2708/patches-4.19/950-0712-overlays-audremap-Support-GPIOs-18-19.patch b/target/linux/brcm2708/patches-4.19/950-0712-overlays-audremap-Support-GPIOs-18-19.patch deleted file mode 100644 index a14a603f8c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0712-overlays-audremap-Support-GPIOs-18-19.patch +++ /dev/null @@ -1,68 +0,0 @@ -From f42cc245e1f3e586f1a26550e5760489b6c329ab Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 23 Jul 2019 12:55:07 +0100 -Subject: [PATCH 712/806] overlays: audremap: Support GPIOs 18 & 19 - -PWM audio can also be used on GPIOs 18 and 19, so add the pins_18_19 -parameter to select that location. pins_12_13 explicitly chooses GPIOs -12 and 13, although this is the default behaviour so is there only for -completeness. - -See: https://github.com/raspberrypi/firmware/issues/1178 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 4 +++- - arch/arm/boot/dts/overlays/audremap-overlay.dts | 16 ++++++++++++++++ - 2 files changed, 19 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -475,12 +475,14 @@ Params: - - - Name: audremap --Info: Switches PWM sound output to pins 12 (Right) & 13 (Left) -+Info: Switches PWM sound output to GPIOs on the 40-pin header - Load: dtoverlay=audremap,= - Params: swap_lr Reverse the channel allocation, which will also - swap the audio jack outputs (default off) - enable_jack Don't switch off the audio jack output - (default off) -+ pins_12_13 Select GPIOs 12 & 13 (default) -+ pins_18_19 Select GPIOs 18 & 19 - - - Name: balena-fin ---- a/arch/arm/boot/dts/overlays/audremap-overlay.dts -+++ b/arch/arm/boot/dts/overlays/audremap-overlay.dts -@@ -7,13 +7,29 @@ - fragment@0 { - target = <&audio_pins>; - frag0: __overlay__ { -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&audio_pins>; -+ __overlay__ { - brcm,pins = < 12 13 >; - brcm,function = < 4 >; /* alt0 alt0 */ - }; - }; - -+ fragment@2 { -+ target = <&audio_pins>; -+ __dormant__ { -+ brcm,pins = < 18 19 >; -+ brcm,function = < 2 >; /* alt5 alt5 */ -+ }; -+ }; -+ - __overrides__ { - swap_lr = <&frag0>, "swap_lr?"; - enable_jack = <&frag0>, "enable_jack?"; -+ pins_12_13 = <0>,"+1-2"; -+ pins_18_19 = <0>,"-1+2"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0712-staging-bcm2835-codec-Add-role-to-device-name.patch b/target/linux/brcm2708/patches-4.19/950-0712-staging-bcm2835-codec-Add-role-to-device-name.patch new file mode 100644 index 0000000000..4afdf8c698 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0712-staging-bcm2835-codec-Add-role-to-device-name.patch @@ -0,0 +1,45 @@ +From ca613ed735fc52e68189d2ad0880f1007b931d78 Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Wed, 20 Mar 2019 11:55:43 +0000 +Subject: [PATCH] staging: bcm2835-codec: Add role to device name + +Three entities are created, Decode, Encode and ISP but all of the video +nodes use the same video name string "bcm2835-codec" which makes it +difficult to identify each role. + +Append the role-name to the video name to facilitate identifying a +specific instance from userspace. + +The Card-Type is also extended with the role name to support identifying +the device context from within QUERY_CAP operations. + +Signed-off-by: Kieran Bingham +--- + .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -947,8 +947,10 @@ static void device_run(void *priv) + static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) + { ++ struct bcm2835_codec_dev *dev = video_drvdata(file); ++ + strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); +- strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); ++ strncpy(cap->card, dev->vfd.name, sizeof(cap->card) - 1); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + MEM2MEM_NAME); + return 0; +@@ -2657,8 +2659,8 @@ static int bcm2835_codec_create(struct p + } + + video_set_drvdata(vfd, dev); +- snprintf(vfd->name, sizeof(vfd->name), "%s", +- bcm2835_codec_videodev.name); ++ snprintf(vfd->name, sizeof(vfd->name), "%s-%s", ++ bcm2835_codec_videodev.name, roles[role]); + v4l2_info(&dev->v4l2_dev, "Device registered as /dev/video%d\n", + vfd->num); + diff --git a/target/linux/brcm2708/patches-4.19/950-0713-drm-connector-Fix-drm_mode_create_tv_properties-doc.patch b/target/linux/brcm2708/patches-4.19/950-0713-drm-connector-Fix-drm_mode_create_tv_properties-doc.patch deleted file mode 100644 index 7ab0f36c3b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0713-drm-connector-Fix-drm_mode_create_tv_properties-doc.patch +++ /dev/null @@ -1,29 +0,0 @@ -From ce5c3d732efb5e3da50119ed876f0d6661f08b84 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Thu, 6 Dec 2018 15:24:35 +0100 -Subject: [PATCH 713/806] drm/connector: Fix drm_mode_create_tv_properties() - doc - -Commit eda6887f1961e0d2fb866b1a520b2de5b3828de5 upstream. - -The in the kernel-doc header did not match the function name. - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Acked-by: Daniel Vetter -Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-2-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/drm_connector.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/gpu/drm/drm_connector.c -+++ b/drivers/gpu/drm/drm_connector.c -@@ -1110,7 +1110,7 @@ void drm_hdmi_avi_infoframe_content_type - EXPORT_SYMBOL(drm_hdmi_avi_infoframe_content_type); - - /** -- * drm_create_tv_properties - create TV specific connector properties -+ * drm_mode_create_tv_properties - create TV specific connector properties - * @dev: DRM device - * @num_modes: number of different TV formats (modes) supported - * @modes: array of pointers to strings containing name of each format diff --git a/target/linux/brcm2708/patches-4.19/950-0713-staging-bcm2835-codec-Pass-driver-context-to-create-.patch b/target/linux/brcm2708/patches-4.19/950-0713-staging-bcm2835-codec-Pass-driver-context-to-create-.patch new file mode 100644 index 0000000000..083e75b21f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0713-staging-bcm2835-codec-Pass-driver-context-to-create-.patch @@ -0,0 +1,61 @@ +From 9243f7de67345adfcac52198f78bd12cfebb6867 Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Wed, 20 Mar 2019 11:35:26 +0000 +Subject: [PATCH] staging: bcm2835-codec: Pass driver context to create + entities + +Pass the bcm2835_codec_driver driver context directly into the +bcm2835_codec_create() so that it can be used to store driver global +state. Pass the struct platform_device *pdev by adding it to the driver +global state. + +Signed-off-by: Kieran Bingham +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -457,6 +457,8 @@ struct bcm2835_codec_ctx { + }; + + struct bcm2835_codec_driver { ++ struct platform_device *pdev; ++ + struct bcm2835_codec_dev *encode; + struct bcm2835_codec_dev *decode; + struct bcm2835_codec_dev *isp; +@@ -2587,10 +2589,11 @@ destroy_component: + return ret; + } + +-static int bcm2835_codec_create(struct platform_device *pdev, ++static int bcm2835_codec_create(struct bcm2835_codec_driver *drv, + struct bcm2835_codec_dev **new_dev, + enum bcm2835_codec_role role) + { ++ struct platform_device *pdev = drv->pdev; + struct bcm2835_codec_dev *dev; + struct video_device *vfd; + int video_nr; +@@ -2711,15 +2714,17 @@ static int bcm2835_codec_probe(struct pl + if (!drv) + return -ENOMEM; + +- ret = bcm2835_codec_create(pdev, &drv->decode, DECODE); ++ drv->pdev = pdev; ++ ++ ret = bcm2835_codec_create(drv, &drv->decode, DECODE); + if (ret) + goto out; + +- ret = bcm2835_codec_create(pdev, &drv->encode, ENCODE); ++ ret = bcm2835_codec_create(drv, &drv->encode, ENCODE); + if (ret) + goto out; + +- ret = bcm2835_codec_create(pdev, &drv->isp, ISP); ++ ret = bcm2835_codec_create(drv, &drv->isp, ISP); + if (ret) + goto out; + diff --git a/target/linux/brcm2708/patches-4.19/950-0714-drm-connector-Clarify-the-unit-of-TV-margins.patch b/target/linux/brcm2708/patches-4.19/950-0714-drm-connector-Clarify-the-unit-of-TV-margins.patch deleted file mode 100644 index 04d022ab11..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0714-drm-connector-Clarify-the-unit-of-TV-margins.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 4589a8a086094061e7476d41578e31349accc190 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Thu, 6 Dec 2018 15:24:36 +0100 -Subject: [PATCH 714/806] drm/connector: Clarify the unit of TV margins - -Commit 56406e15b5e83256151ef74eb1a219cbf13d91c8 upstream. - -All margins are expressed in pixels. Clarify that in the doc. - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Acked-by: Daniel Vetter -Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-3-boris.brezillon@bootlin.com ---- - include/drm/drm_connector.h | 2 +- - include/drm/drm_mode_config.h | 8 ++++---- - 2 files changed, 5 insertions(+), 5 deletions(-) - ---- a/include/drm/drm_connector.h -+++ b/include/drm/drm_connector.h -@@ -346,7 +346,7 @@ int drm_display_info_set_bus_formats(str - /** - * struct drm_tv_connector_state - TV connector related states - * @subconnector: selected subconnector -- * @margins: margins -+ * @margins: margins (all margins are expressed in pixels) - * @margins.left: left margin - * @margins.right: right margin - * @margins.top: top margin ---- a/include/drm/drm_mode_config.h -+++ b/include/drm/drm_mode_config.h -@@ -668,22 +668,22 @@ struct drm_mode_config { - struct drm_property *tv_mode_property; - /** - * @tv_left_margin_property: Optional TV property to set the left -- * margin. -+ * margin (expressed in pixels). - */ - struct drm_property *tv_left_margin_property; - /** - * @tv_right_margin_property: Optional TV property to set the right -- * margin. -+ * margin (expressed in pixels). - */ - struct drm_property *tv_right_margin_property; - /** - * @tv_top_margin_property: Optional TV property to set the right -- * margin. -+ * margin (expressed in pixels). - */ - struct drm_property *tv_top_margin_property; - /** - * @tv_bottom_margin_property: Optional TV property to set the right -- * margin. -+ * margin (expressed in pixels). - */ - struct drm_property *tv_bottom_margin_property; - /** diff --git a/target/linux/brcm2708/patches-4.19/950-0714-staging-bcm2835-codec-add-media-controller-support.patch b/target/linux/brcm2708/patches-4.19/950-0714-staging-bcm2835-codec-add-media-controller-support.patch new file mode 100644 index 0000000000..a42fa7dfe1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0714-staging-bcm2835-codec-add-media-controller-support.patch @@ -0,0 +1,163 @@ +From d1ceb85b7c6c7c3eec8b424e0172c29e93a570f2 Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Wed, 20 Mar 2019 12:54:15 +0000 +Subject: [PATCH] staging: bcm2835-codec: add media controller support + +Provide a single media device to contain all of the bcm2835_codec +devices created. + +Signed-off-by: Kieran Bingham +--- + .../vc04_services/bcm2835-codec/Kconfig | 2 +- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 41 +++++++++++++++++-- + 2 files changed, 38 insertions(+), 5 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/Kconfig ++++ b/drivers/staging/vc04_services/bcm2835-codec/Kconfig +@@ -1,6 +1,6 @@ + config VIDEO_CODEC_BCM2835 + tristate "BCM2835 Video codec support" +- depends on MEDIA_SUPPORT ++ depends on MEDIA_SUPPORT && MEDIA_CONTROLLER + depends on VIDEO_V4L2 && (ARCH_BCM2835 || COMPILE_TEST) + select BCM2835_VCHIQ_MMAL + select VIDEOBUF2_DMA_CONTIG +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -458,6 +458,7 @@ struct bcm2835_codec_ctx { + + struct bcm2835_codec_driver { + struct platform_device *pdev; ++ struct media_device mdev; + + struct bcm2835_codec_dev *encode; + struct bcm2835_codec_dev *decode; +@@ -2596,6 +2597,7 @@ static int bcm2835_codec_create(struct b + struct platform_device *pdev = drv->pdev; + struct bcm2835_codec_dev *dev; + struct video_device *vfd; ++ int function; + int video_nr; + int ret; + +@@ -2615,18 +2617,21 @@ static int bcm2835_codec_create(struct b + if (ret) + goto vchiq_finalise; + +- ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); +- if (ret) +- goto vchiq_finalise; +- + atomic_set(&dev->num_inst, 0); + mutex_init(&dev->dev_mutex); + ++ /* Initialise the video device */ + dev->vfd = bcm2835_codec_videodev; ++ + vfd = &dev->vfd; + vfd->lock = &dev->dev_mutex; + vfd->v4l2_dev = &dev->v4l2_dev; + vfd->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; ++ vfd->v4l2_dev->mdev = &drv->mdev; ++ ++ ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); ++ if (ret) ++ goto vchiq_finalise; + + switch (role) { + case DECODE: +@@ -2634,11 +2639,13 @@ static int bcm2835_codec_create(struct b + v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); + v4l2_disable_ioctl(vfd, VIDIOC_S_PARM); + v4l2_disable_ioctl(vfd, VIDIOC_G_PARM); ++ function = MEDIA_ENT_F_PROC_VIDEO_DECODER; + video_nr = decode_video_nr; + break; + case ENCODE: + v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); + v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); ++ function = MEDIA_ENT_F_PROC_VIDEO_ENCODER; + video_nr = encode_video_nr; + break; + case ISP: +@@ -2648,6 +2655,7 @@ static int bcm2835_codec_create(struct b + v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); + v4l2_disable_ioctl(vfd, VIDIOC_S_PARM); + v4l2_disable_ioctl(vfd, VIDIOC_G_PARM); ++ function = MEDIA_ENT_F_PROC_VIDEO_SCALER; + video_nr = isp_video_nr; + break; + default: +@@ -2676,6 +2684,10 @@ static int bcm2835_codec_create(struct b + goto err_m2m; + } + ++ ret = v4l2_m2m_register_media_controller(dev->m2m_dev, vfd, function); ++ if (ret) ++ goto err_m2m; ++ + v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s\n", + roles[role]); + return 0; +@@ -2697,6 +2709,7 @@ static int bcm2835_codec_destroy(struct + + v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME ", %s\n", + roles[dev->role]); ++ v4l2_m2m_unregister_media_controller(dev->m2m_dev); + v4l2_m2m_release(dev->m2m_dev); + video_unregister_device(&dev->vfd); + v4l2_device_unregister(&dev->v4l2_dev); +@@ -2708,6 +2721,7 @@ static int bcm2835_codec_destroy(struct + static int bcm2835_codec_probe(struct platform_device *pdev) + { + struct bcm2835_codec_driver *drv; ++ struct media_device *mdev; + int ret = 0; + + drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); +@@ -2715,6 +2729,17 @@ static int bcm2835_codec_probe(struct pl + return -ENOMEM; + + drv->pdev = pdev; ++ mdev = &drv->mdev; ++ mdev->dev = &pdev->dev; ++ ++ strscpy(mdev->model, bcm2835_codec_videodev.name, sizeof(mdev->model)); ++ strscpy(mdev->serial, "0000", sizeof(mdev->serial)); ++ snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s", ++ pdev->name); ++ ++ /* This should return the vgencmd version information or such .. */ ++ mdev->hw_revision = 1; ++ media_device_init(mdev); + + ret = bcm2835_codec_create(drv, &drv->decode, DECODE); + if (ret) +@@ -2728,6 +2753,10 @@ static int bcm2835_codec_probe(struct pl + if (ret) + goto out; + ++ /* Register the media device node */ ++ if (media_device_register(mdev) < 0) ++ goto out; ++ + platform_set_drvdata(pdev, drv); + + return 0; +@@ -2748,12 +2777,16 @@ static int bcm2835_codec_remove(struct p + { + struct bcm2835_codec_driver *drv = platform_get_drvdata(pdev); + ++ media_device_unregister(&drv->mdev); ++ + bcm2835_codec_destroy(drv->isp); + + bcm2835_codec_destroy(drv->encode); + + bcm2835_codec_destroy(drv->decode); + ++ media_device_cleanup(&drv->mdev); ++ + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.19/950-0715-drm-connector-Allow-creation-of-margin-props-alone.patch b/target/linux/brcm2708/patches-4.19/950-0715-drm-connector-Allow-creation-of-margin-props-alone.patch deleted file mode 100644 index c048f26241..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0715-drm-connector-Allow-creation-of-margin-props-alone.patch +++ /dev/null @@ -1,136 +0,0 @@ -From 4f2277b18d6bbb6fac50b751c4e513619849b23c Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Thu, 6 Dec 2018 15:24:37 +0100 -Subject: [PATCH 715/806] drm/connector: Allow creation of margin props alone - -Commit 6c4f52dca36f5e3e2354c30591d38e92f4657ed9 upstream. - -TV margins properties can only be added as part of the SDTV TV -connector properties creation, but we might need those props for HDMI -TVs too, so let's move the margins props creation in a separate -function and expose it to drivers. - -We also add an helper to attach margins props to a connector. - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Acked-by: Daniel Vetter -Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-4-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/drm_connector.c | 83 ++++++++++++++++++++++++++------- - include/drm/drm_connector.h | 2 + - 2 files changed, 67 insertions(+), 18 deletions(-) - ---- a/drivers/gpu/drm/drm_connector.c -+++ b/drivers/gpu/drm/drm_connector.c -@@ -1110,6 +1110,70 @@ void drm_hdmi_avi_infoframe_content_type - EXPORT_SYMBOL(drm_hdmi_avi_infoframe_content_type); - - /** -+ * drm_mode_attach_tv_margin_properties - attach TV connector margin properties -+ * @connector: DRM connector -+ * -+ * Called by a driver when it needs to attach TV margin props to a connector. -+ * Typically used on SDTV and HDMI connectors. -+ */ -+void drm_connector_attach_tv_margin_properties(struct drm_connector *connector) -+{ -+ struct drm_device *dev = connector->dev; -+ -+ drm_object_attach_property(&connector->base, -+ dev->mode_config.tv_left_margin_property, -+ 0); -+ drm_object_attach_property(&connector->base, -+ dev->mode_config.tv_right_margin_property, -+ 0); -+ drm_object_attach_property(&connector->base, -+ dev->mode_config.tv_top_margin_property, -+ 0); -+ drm_object_attach_property(&connector->base, -+ dev->mode_config.tv_bottom_margin_property, -+ 0); -+} -+EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties); -+ -+/** -+ * drm_mode_create_tv_margin_properties - create TV connector margin properties -+ * @dev: DRM device -+ * -+ * Called by a driver's HDMI connector initialization routine, this function -+ * creates the TV margin properties for a given device. No need to call this -+ * function for an SDTV connector, it's already called from -+ * drm_mode_create_tv_properties(). -+ */ -+int drm_mode_create_tv_margin_properties(struct drm_device *dev) -+{ -+ if (dev->mode_config.tv_left_margin_property) -+ return 0; -+ -+ dev->mode_config.tv_left_margin_property = -+ drm_property_create_range(dev, 0, "left margin", 0, 100); -+ if (!dev->mode_config.tv_left_margin_property) -+ return -ENOMEM; -+ -+ dev->mode_config.tv_right_margin_property = -+ drm_property_create_range(dev, 0, "right margin", 0, 100); -+ if (!dev->mode_config.tv_right_margin_property) -+ return -ENOMEM; -+ -+ dev->mode_config.tv_top_margin_property = -+ drm_property_create_range(dev, 0, "top margin", 0, 100); -+ if (!dev->mode_config.tv_top_margin_property) -+ return -ENOMEM; -+ -+ dev->mode_config.tv_bottom_margin_property = -+ drm_property_create_range(dev, 0, "bottom margin", 0, 100); -+ if (!dev->mode_config.tv_bottom_margin_property) -+ return -ENOMEM; -+ -+ return 0; -+} -+EXPORT_SYMBOL(drm_mode_create_tv_margin_properties); -+ -+/** - * drm_mode_create_tv_properties - create TV specific connector properties - * @dev: DRM device - * @num_modes: number of different TV formats (modes) supported -@@ -1155,24 +1219,7 @@ int drm_mode_create_tv_properties(struct - /* - * Other, TV specific properties: margins & TV modes. - */ -- dev->mode_config.tv_left_margin_property = -- drm_property_create_range(dev, 0, "left margin", 0, 100); -- if (!dev->mode_config.tv_left_margin_property) -- goto nomem; -- -- dev->mode_config.tv_right_margin_property = -- drm_property_create_range(dev, 0, "right margin", 0, 100); -- if (!dev->mode_config.tv_right_margin_property) -- goto nomem; -- -- dev->mode_config.tv_top_margin_property = -- drm_property_create_range(dev, 0, "top margin", 0, 100); -- if (!dev->mode_config.tv_top_margin_property) -- goto nomem; -- -- dev->mode_config.tv_bottom_margin_property = -- drm_property_create_range(dev, 0, "bottom margin", 0, 100); -- if (!dev->mode_config.tv_bottom_margin_property) -+ if (drm_mode_create_tv_margin_properties(dev)) - goto nomem; - - dev->mode_config.tv_mode_property = ---- a/include/drm/drm_connector.h -+++ b/include/drm/drm_connector.h -@@ -1175,9 +1175,11 @@ const char *drm_get_tv_select_name(int v - const char *drm_get_content_protection_name(int val); - - int drm_mode_create_dvi_i_properties(struct drm_device *dev); -+int drm_mode_create_tv_margin_properties(struct drm_device *dev); - int drm_mode_create_tv_properties(struct drm_device *dev, - unsigned int num_modes, - const char * const modes[]); -+void drm_connector_attach_tv_margin_properties(struct drm_connector *conn); - int drm_mode_create_scaling_mode_property(struct drm_device *dev); - int drm_connector_attach_content_type_property(struct drm_connector *dev); - int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, diff --git a/target/linux/brcm2708/patches-4.19/950-0715-media-bcm2835-unicam-Reduce-scope-of-local-function.patch b/target/linux/brcm2708/patches-4.19/950-0715-media-bcm2835-unicam-Reduce-scope-of-local-function.patch new file mode 100644 index 0000000000..1e9d4b445f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0715-media-bcm2835-unicam-Reduce-scope-of-local-function.patch @@ -0,0 +1,29 @@ +From 4924b7b5517c9c334cf5faa3c7a29adf9a0c0ba1 Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Wed, 28 Aug 2019 15:54:19 +0100 +Subject: [PATCH] media: bcm2835: unicam: Reduce scope of local + function + +unicam_start_rx() is not used outside of the unicam module. Its current +definition produces a compiler warning, that no function prototype +exists. + +As the function is only used within the local scope of the module, +convert it to a static function. + +Signed-off-by: Kieran Bingham +--- + drivers/media/platform/bcm2835/bcm2835-unicam.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/media/platform/bcm2835/bcm2835-unicam.c ++++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c +@@ -963,7 +963,7 @@ static void unicam_cfg_image_id(struct u + } + } + +-void unicam_start_rx(struct unicam_device *dev, unsigned long addr) ++static void unicam_start_rx(struct unicam_device *dev, unsigned long addr) + { + struct unicam_cfg *cfg = &dev->cfg; + int line_int_freq = dev->v_fmt.fmt.pix.height >> 2; diff --git a/target/linux/brcm2708/patches-4.19/950-0716-drm-vc4-Take-margin-setup-into-account-when-updating.patch b/target/linux/brcm2708/patches-4.19/950-0716-drm-vc4-Take-margin-setup-into-account-when-updating.patch deleted file mode 100644 index 22b909efe8..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0716-drm-vc4-Take-margin-setup-into-account-when-updating.patch +++ /dev/null @@ -1,185 +0,0 @@ -From 0d592a7685e41d0bb1816a4fedb11d3570474417 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Thu, 6 Dec 2018 15:24:38 +0100 -Subject: [PATCH 716/806] drm/vc4: Take margin setup into account when updating - planes - -Commit 666e73587f90f42d90385c1bea1009a650bf73f4 upstream. - -Applyin margins is just a matter of scaling all planes appropriately -and adjusting the CRTC X/Y offset to account for the -left/right/top/bottom borders. - -Create a vc4_plane_margins_adj() function doing that and call it from -vc4_plane_setup_clipping_and_scaling() so that we are ready to attach -margins properties to the HDMI connector. - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Acked-by: Daniel Vetter -Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-5-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/vc4/vc4_crtc.c | 43 +++++++++++++++++++++++++++ - drivers/gpu/drm/vc4/vc4_drv.h | 3 ++ - drivers/gpu/drm/vc4/vc4_plane.c | 51 +++++++++++++++++++++++++++++++++ - 3 files changed, 97 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -48,6 +48,13 @@ struct vc4_crtc_state { - struct drm_mm_node mm; - bool feed_txp; - bool txp_armed; -+ -+ struct { -+ unsigned int left; -+ unsigned int right; -+ unsigned int top; -+ unsigned int bottom; -+ } margins; - }; - - static inline struct vc4_crtc_state * -@@ -623,6 +630,37 @@ static enum drm_mode_status vc4_crtc_mod - return MODE_OK; - } - -+void vc4_crtc_get_margins(struct drm_crtc_state *state, -+ unsigned int *left, unsigned int *right, -+ unsigned int *top, unsigned int *bottom) -+{ -+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state); -+ struct drm_connector_state *conn_state; -+ struct drm_connector *conn; -+ int i; -+ -+ *left = vc4_state->margins.left; -+ *right = vc4_state->margins.right; -+ *top = vc4_state->margins.top; -+ *bottom = vc4_state->margins.bottom; -+ -+ /* We have to interate over all new connector states because -+ * vc4_crtc_get_margins() might be called before -+ * vc4_crtc_atomic_check() which means margins info in vc4_crtc_state -+ * might be outdated. -+ */ -+ for_each_new_connector_in_state(state->state, conn, conn_state, i) { -+ if (conn_state->crtc != state->crtc) -+ continue; -+ -+ *left = conn_state->tv.margins.left; -+ *right = conn_state->tv.margins.right; -+ *top = conn_state->tv.margins.top; -+ *bottom = conn_state->tv.margins.bottom; -+ break; -+ } -+} -+ - static int vc4_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *state) - { -@@ -670,6 +708,10 @@ static int vc4_crtc_atomic_check(struct - vc4_state->feed_txp = false; - } - -+ vc4_state->margins.left = conn_state->tv.margins.left; -+ vc4_state->margins.right = conn_state->tv.margins.right; -+ vc4_state->margins.top = conn_state->tv.margins.top; -+ vc4_state->margins.bottom = conn_state->tv.margins.bottom; - break; - } - -@@ -971,6 +1013,7 @@ static struct drm_crtc_state *vc4_crtc_d - - old_vc4_state = to_vc4_crtc_state(crtc->state); - vc4_state->feed_txp = old_vc4_state->feed_txp; -+ vc4_state->margins = old_vc4_state->margins; - - __drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base); - return &vc4_state->base; ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -705,6 +705,9 @@ bool vc4_crtc_get_scanoutpos(struct drm_ - const struct drm_display_mode *mode); - void vc4_crtc_handle_vblank(struct vc4_crtc *crtc); - void vc4_crtc_txp_armed(struct drm_crtc_state *state); -+void vc4_crtc_get_margins(struct drm_crtc_state *state, -+ unsigned int *right, unsigned int *left, -+ unsigned int *top, unsigned int *bottom); - - /* vc4_debugfs.c */ - int vc4_debugfs_init(struct drm_minor *minor); ---- a/drivers/gpu/drm/vc4/vc4_plane.c -+++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -258,6 +258,52 @@ static u32 vc4_get_scl_field(struct drm_ - } - } - -+static int vc4_plane_margins_adj(struct drm_plane_state *pstate) -+{ -+ struct vc4_plane_state *vc4_pstate = to_vc4_plane_state(pstate); -+ unsigned int left, right, top, bottom, adjhdisplay, adjvdisplay; -+ struct drm_crtc_state *crtc_state; -+ -+ crtc_state = drm_atomic_get_new_crtc_state(pstate->state, -+ pstate->crtc); -+ -+ vc4_crtc_get_margins(crtc_state, &left, &right, &top, &bottom); -+ if (!left && !right && !top && !bottom) -+ return 0; -+ -+ if (left + right >= crtc_state->mode.hdisplay || -+ top + bottom >= crtc_state->mode.vdisplay) -+ return -EINVAL; -+ -+ adjhdisplay = crtc_state->mode.hdisplay - (left + right); -+ vc4_pstate->crtc_x = DIV_ROUND_CLOSEST(vc4_pstate->crtc_x * -+ adjhdisplay, -+ crtc_state->mode.hdisplay); -+ vc4_pstate->crtc_x += left; -+ if (vc4_pstate->crtc_x > crtc_state->mode.hdisplay - left) -+ vc4_pstate->crtc_x = crtc_state->mode.hdisplay - left; -+ -+ adjvdisplay = crtc_state->mode.vdisplay - (top + bottom); -+ vc4_pstate->crtc_y = DIV_ROUND_CLOSEST(vc4_pstate->crtc_y * -+ adjvdisplay, -+ crtc_state->mode.vdisplay); -+ vc4_pstate->crtc_y += top; -+ if (vc4_pstate->crtc_y > crtc_state->mode.vdisplay - top) -+ vc4_pstate->crtc_y = crtc_state->mode.vdisplay - top; -+ -+ vc4_pstate->crtc_w = DIV_ROUND_CLOSEST(vc4_pstate->crtc_w * -+ adjhdisplay, -+ crtc_state->mode.hdisplay); -+ vc4_pstate->crtc_h = DIV_ROUND_CLOSEST(vc4_pstate->crtc_h * -+ adjvdisplay, -+ crtc_state->mode.vdisplay); -+ -+ if (!vc4_pstate->crtc_w || !vc4_pstate->crtc_h) -+ return -EINVAL; -+ -+ return 0; -+} -+ - static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) - { - struct drm_plane *plane = state->plane; -@@ -269,6 +315,7 @@ static int vc4_plane_setup_clipping_and_ - int num_planes = fb->format->num_planes; - u32 h_subsample = 1; - u32 v_subsample = 1; -+ int ret; - int i; - - for (i = 0; i < num_planes; i++) -@@ -292,6 +339,10 @@ static int vc4_plane_setup_clipping_and_ - vc4_state->crtc_w = state->crtc_w; - vc4_state->crtc_h = state->crtc_h; - -+ ret = vc4_plane_margins_adj(state); -+ if (ret) -+ return ret; -+ - vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0], - vc4_state->crtc_w); - vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0], diff --git a/target/linux/brcm2708/patches-4.19/950-0716-media-bcm2835-unicam-add-media-controller-support.patch b/target/linux/brcm2708/patches-4.19/950-0716-media-bcm2835-unicam-add-media-controller-support.patch new file mode 100644 index 0000000000..e84721258d --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0716-media-bcm2835-unicam-add-media-controller-support.patch @@ -0,0 +1,128 @@ +From 06cd9857f8faa63321506a75988c475906a32970 Mon Sep 17 00:00:00 2001 +From: Kieran Bingham +Date: Wed, 20 Mar 2019 12:54:47 +0000 +Subject: [PATCH] media: bcm2835: unicam: add media controller support + +Add a media controller device node to represent the Unicam device. +The attached sensor will be automatically added to the media graph by +V4L2 core. + +Signed-off-by: Kieran Bingham +--- + drivers/media/platform/bcm2835/Kconfig | 2 +- + .../media/platform/bcm2835/bcm2835-unicam.c | 46 ++++++++++++++++++- + 2 files changed, 45 insertions(+), 3 deletions(-) + +--- a/drivers/media/platform/bcm2835/Kconfig ++++ b/drivers/media/platform/bcm2835/Kconfig +@@ -2,7 +2,7 @@ + + config VIDEO_BCM2835_UNICAM + tristate "Broadcom BCM2835 Unicam video capture driver" +- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API ++ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER + depends on ARCH_BCM2835 || COMPILE_TEST + select VIDEOBUF2_DMA_CONTIG + select V4L2_FWNODE +--- a/drivers/media/platform/bcm2835/bcm2835-unicam.c ++++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c +@@ -314,6 +314,9 @@ struct unicam_device { + struct clk *clock; + /* V4l2 device */ + struct v4l2_device v4l2_dev; ++ struct media_device mdev; ++ struct media_pad pad; ++ + /* parent device */ + struct platform_device *pdev; + /* subdevice async Notifier */ +@@ -1912,6 +1915,8 @@ static int unicam_probe_complete(struct + unicam->v4l2_dev.ctrl_handler = NULL; + + video_set_drvdata(vdev, unicam); ++ vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT; ++ + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + if (ret) { + unicam_err(unicam, "Unable to register video device.\n"); +@@ -1953,6 +1958,16 @@ static int unicam_probe_complete(struct + return ret; + } + ++ ret = media_create_pad_link(&unicam->sensor->entity, 0, ++ &unicam->video_dev.entity, 0, ++ MEDIA_LNK_FL_ENABLED | ++ MEDIA_LNK_FL_IMMUTABLE); ++ if (ret) { ++ unicam_err(unicam, "Unable to create pad links.\n"); ++ video_unregister_device(&unicam->video_dev); ++ return ret; ++ } ++ + return 0; + } + +@@ -2155,18 +2170,38 @@ static int unicam_probe(struct platform_ + return -EINVAL; + } + ++ unicam->mdev.dev = &pdev->dev; ++ strscpy(unicam->mdev.model, UNICAM_MODULE_NAME, ++ sizeof(unicam->mdev.model)); ++ strscpy(unicam->mdev.serial, "", sizeof(unicam->mdev.serial)); ++ snprintf(unicam->mdev.bus_info, sizeof(unicam->mdev.bus_info), ++ "platform:%s", pdev->name); ++ unicam->mdev.hw_revision = 1; ++ ++ media_entity_pads_init(&unicam->video_dev.entity, 1, &unicam->pad); ++ media_device_init(&unicam->mdev); ++ ++ unicam->v4l2_dev.mdev = &unicam->mdev; ++ + ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev); + if (ret) { + unicam_err(unicam, + "Unable to register v4l2 device.\n"); +- return ret; ++ goto media_cleanup; ++ } ++ ++ ret = media_device_register(&unicam->mdev); ++ if (ret < 0) { ++ unicam_err(unicam, ++ "Unable to register media-controller device.\n"); ++ goto probe_out_v4l2_unregister; + } + + /* Reserve space for the controls */ + hdl = &unicam->ctrl_handler; + ret = v4l2_ctrl_handler_init(hdl, 16); + if (ret < 0) +- goto probe_out_v4l2_unregister; ++ goto media_unregister; + unicam->v4l2_dev.ctrl_handler = hdl; + + /* set the driver data in platform device */ +@@ -2185,8 +2220,13 @@ static int unicam_probe(struct platform_ + + free_hdl: + v4l2_ctrl_handler_free(hdl); ++media_unregister: ++ media_device_unregister(&unicam->mdev); + probe_out_v4l2_unregister: + v4l2_device_unregister(&unicam->v4l2_dev); ++media_cleanup: ++ media_device_cleanup(&unicam->mdev); ++ + return ret; + } + +@@ -2204,6 +2244,8 @@ static int unicam_remove(struct platform + video_unregister_device(&unicam->video_dev); + if (unicam->sensor_config) + v4l2_subdev_free_pad_config(unicam->sensor_config); ++ media_device_unregister(&unicam->mdev); ++ media_device_cleanup(&unicam->mdev); + + return 0; + } diff --git a/target/linux/brcm2708/patches-4.19/950-0717-Limit-max_req_size-under-arm64-or-any-other-platform.patch b/target/linux/brcm2708/patches-4.19/950-0717-Limit-max_req_size-under-arm64-or-any-other-platform.patch new file mode 100644 index 0000000000..87b4e9b58a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0717-Limit-max_req_size-under-arm64-or-any-other-platform.patch @@ -0,0 +1,33 @@ +From 7bfcb31431f06efc233e4cc4d7ab65e10a6522cd Mon Sep 17 00:00:00 2001 +From: Yaroslav Rosomakho +Date: Fri, 23 Aug 2019 11:02:22 +0200 +Subject: [PATCH] Limit max_req_size under arm64 (or any other platform + that uses swiotlb) to prevent potential buffer overflow due to bouncing. + +Signed-off-by: Yaroslav Rosomakho +--- + drivers/mmc/host/bcm2835-mmc.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/mmc/host/bcm2835-mmc.c ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -38,6 +38,7 @@ + #include + #include + #include ++#include + + #include "sdhci.h" + +@@ -1374,7 +1375,10 @@ static int bcm2835_mmc_add_host(struct b + } + #endif + mmc->max_segs = 128; +- mmc->max_req_size = 524288; ++ if (swiotlb_max_segment()) ++ mmc->max_req_size = (1 << IO_TLB_SHIFT) * IO_TLB_SEGSIZE; ++ else ++ mmc->max_req_size = 524288; + mmc->max_seg_size = mmc->max_req_size; + mmc->max_blk_size = 512; + mmc->max_blk_count = 65535; diff --git a/target/linux/brcm2708/patches-4.19/950-0717-drm-vc4-Attach-margin-props-to-the-HDMI-connector.patch b/target/linux/brcm2708/patches-4.19/950-0717-drm-vc4-Attach-margin-props-to-the-HDMI-connector.patch deleted file mode 100644 index 4aa19c59c7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0717-drm-vc4-Attach-margin-props-to-the-HDMI-connector.patch +++ /dev/null @@ -1,71 +0,0 @@ -From efd1df5cd92e4436f863730f666117494613693b Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Thu, 6 Dec 2018 15:24:39 +0100 -Subject: [PATCH 717/806] drm/vc4: Attach margin props to the HDMI connector - -Commit db999538fdb0679629d90652f8a1437df1e85a7d upstream. - -Now that the plane code takes the margins setup into account, we can -safely attach margin props to the HDMI connector. - -We also take care of filling AVI infoframes correctly to expose the -top/botton/left/right bar. - -Note that those margin props match pretty well the -overscan_{left,right,top,bottom} properties defined in config.txt and -parsed by the VC4 firmware. - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Acked-by: Daniel Vetter -Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-6-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/vc4/vc4_hdmi.c | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_hdmi.c -+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -310,6 +310,7 @@ static struct drm_connector *vc4_hdmi_co - { - struct drm_connector *connector; - struct vc4_hdmi_connector *hdmi_connector; -+ int ret; - - hdmi_connector = devm_kzalloc(dev->dev, sizeof(*hdmi_connector), - GFP_KERNEL); -@@ -323,6 +324,13 @@ static struct drm_connector *vc4_hdmi_co - DRM_MODE_CONNECTOR_HDMIA); - drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs); - -+ /* Create and attach TV margin props to this connector. */ -+ ret = drm_mode_create_tv_margin_properties(dev); -+ if (ret) -+ return ERR_PTR(ret); -+ -+ drm_connector_attach_tv_margin_properties(connector); -+ - connector->polled = (DRM_CONNECTOR_POLL_CONNECT | - DRM_CONNECTOR_POLL_DISCONNECT); - -@@ -408,6 +416,9 @@ static void vc4_hdmi_write_infoframe(str - static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder) - { - struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder); -+ struct vc4_dev *vc4 = encoder->dev->dev_private; -+ struct vc4_hdmi *hdmi = vc4->hdmi; -+ struct drm_connector_state *cstate = hdmi->connector->state; - struct drm_crtc *crtc = encoder->crtc; - const struct drm_display_mode *mode = &crtc->state->adjusted_mode; - union hdmi_infoframe frame; -@@ -426,6 +437,11 @@ static void vc4_hdmi_set_avi_infoframe(s - vc4_encoder->rgb_range_selectable, - false); - -+ frame.avi.right_bar = cstate->tv.margins.right; -+ frame.avi.left_bar = cstate->tv.margins.left; -+ frame.avi.top_bar = cstate->tv.margins.top; -+ frame.avi.bottom_bar = cstate->tv.margins.bottom; -+ - vc4_hdmi_write_infoframe(encoder, &frame); - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0718-Add-missing-dma_unmap_sg-calls-to-free-relevant-swio.patch b/target/linux/brcm2708/patches-4.19/950-0718-Add-missing-dma_unmap_sg-calls-to-free-relevant-swio.patch new file mode 100644 index 0000000000..0a14126fbd --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0718-Add-missing-dma_unmap_sg-calls-to-free-relevant-swio.patch @@ -0,0 +1,46 @@ +From f8554985b77df2dac55f2d7c85e0f0cc3497a1fd Mon Sep 17 00:00:00 2001 +From: Yaroslav Rosomakho +Date: Fri, 23 Aug 2019 11:05:51 +0200 +Subject: [PATCH] Add missing dma_unmap_sg calls to free relevant + swiotlb bounce buffers. This prevents DMA leaks. + +Signed-off-by: Yaroslav Rosomakho +--- + drivers/mmc/host/bcm2835-mmc.c | 15 +++++++++------ + 1 file changed, 9 insertions(+), 6 deletions(-) + +--- a/drivers/mmc/host/bcm2835-mmc.c ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -345,16 +345,17 @@ static void bcm2835_mmc_dma_complete(voi + + host->use_dma = false; + +- if (host->data && !(host->data->flags & MMC_DATA_WRITE)) { +- /* otherwise handled in SDHCI IRQ */ ++ if (host->data) { + dma_chan = host->dma_chan_rxtx; +- dir_data = DMA_FROM_DEVICE; +- ++ if (host->data->flags & MMC_DATA_WRITE) ++ dir_data = DMA_TO_DEVICE; ++ else ++ dir_data = DMA_FROM_DEVICE; + dma_unmap_sg(dma_chan->device->dev, + host->data->sg, host->data->sg_len, + dir_data); +- +- bcm2835_mmc_finish_data(host); ++ if (! (host->data->flags & MMC_DATA_WRITE)) ++ bcm2835_mmc_finish_data(host); + } else if (host->wait_for_dma) { + host->wait_for_dma = false; + tasklet_schedule(&host->finish_tasklet); +@@ -540,6 +541,8 @@ static void bcm2835_mmc_transfer_dma(str + spin_unlock_irqrestore(&host->lock, flags); + dmaengine_submit(desc); + dma_async_issue_pending(dma_chan); ++ } else { ++ dma_unmap_sg(dma_chan->device->dev, host->data->sg, len, dir_data); + } + + } diff --git a/target/linux/brcm2708/patches-4.19/950-0718-drm-vc4-Add-support-for-margins-to-fkms.patch b/target/linux/brcm2708/patches-4.19/950-0718-drm-vc4-Add-support-for-margins-to-fkms.patch deleted file mode 100644 index 1e937cdd89..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0718-drm-vc4-Add-support-for-margins-to-fkms.patch +++ /dev/null @@ -1,328 +0,0 @@ -From a4e8051901a5d858a69732a3f9734835afc00af5 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 19 Jul 2019 15:35:13 +0100 -Subject: [PATCH 718/806] drm/vc4: Add support for margins to fkms - -Allows for overscan to be configured under FKMS. -NB This is rescaling the planes, not reducing the size of the -display mode. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 241 +++++++++++++++++++------ - 1 file changed, 190 insertions(+), 51 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -256,6 +256,23 @@ static inline struct vc4_crtc *to_vc4_cr - return container_of(crtc, struct vc4_crtc, base); - } - -+struct vc4_crtc_state { -+ struct drm_crtc_state base; -+ -+ struct { -+ unsigned int left; -+ unsigned int right; -+ unsigned int top; -+ unsigned int bottom; -+ } margins; -+}; -+ -+static inline struct vc4_crtc_state * -+to_vc4_crtc_state(struct drm_crtc_state *crtc_state) -+{ -+ return (struct vc4_crtc_state *)crtc_state; -+} -+ - struct vc4_fkms_encoder { - struct drm_encoder base; - bool hdmi_monitor; -@@ -365,17 +382,127 @@ static int vc4_plane_set_blank(struct dr - return ret; - } - -+static void vc4_fkms_crtc_get_margins(struct drm_crtc_state *state, -+ unsigned int *left, unsigned int *right, -+ unsigned int *top, unsigned int *bottom) -+{ -+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state); -+ struct drm_connector_state *conn_state; -+ struct drm_connector *conn; -+ int i; -+ -+ *left = vc4_state->margins.left; -+ *right = vc4_state->margins.right; -+ *top = vc4_state->margins.top; -+ *bottom = vc4_state->margins.bottom; -+ -+ /* We have to interate over all new connector states because -+ * vc4_fkms_crtc_get_margins() might be called before -+ * vc4_fkms_crtc_atomic_check() which means margins info in -+ * vc4_crtc_state might be outdated. -+ */ -+ for_each_new_connector_in_state(state->state, conn, conn_state, i) { -+ if (conn_state->crtc != state->crtc) -+ continue; -+ -+ *left = conn_state->tv.margins.left; -+ *right = conn_state->tv.margins.right; -+ *top = conn_state->tv.margins.top; -+ *bottom = conn_state->tv.margins.bottom; -+ break; -+ } -+} -+ -+static int vc4_fkms_margins_adj(struct drm_plane_state *pstate, -+ struct set_plane *plane) -+{ -+ unsigned int left, right, top, bottom; -+ int adjhdisplay, adjvdisplay; -+ struct drm_crtc_state *crtc_state; -+ -+ crtc_state = drm_atomic_get_new_crtc_state(pstate->state, -+ pstate->crtc); -+ -+ vc4_fkms_crtc_get_margins(crtc_state, &left, &right, &top, &bottom); -+ -+ if (!left && !right && !top && !bottom) -+ return 0; -+ -+ if (left + right >= crtc_state->mode.hdisplay || -+ top + bottom >= crtc_state->mode.vdisplay) -+ return -EINVAL; -+ -+ adjhdisplay = crtc_state->mode.hdisplay - (left + right); -+ plane->dst_x = DIV_ROUND_CLOSEST(plane->dst_x * adjhdisplay, -+ (int)crtc_state->mode.hdisplay); -+ plane->dst_x += left; -+ if (plane->dst_x > (int)(crtc_state->mode.hdisplay - left)) -+ plane->dst_x = crtc_state->mode.hdisplay - left; -+ -+ adjvdisplay = crtc_state->mode.vdisplay - (top + bottom); -+ plane->dst_y = DIV_ROUND_CLOSEST(plane->dst_y * adjvdisplay, -+ (int)crtc_state->mode.vdisplay); -+ plane->dst_y += top; -+ if (plane->dst_y > (int)(crtc_state->mode.vdisplay - top)) -+ plane->dst_y = crtc_state->mode.vdisplay - top; -+ -+ plane->dst_w = DIV_ROUND_CLOSEST(plane->dst_w * adjhdisplay, -+ crtc_state->mode.hdisplay); -+ plane->dst_h = DIV_ROUND_CLOSEST(plane->dst_h * adjvdisplay, -+ crtc_state->mode.vdisplay); -+ -+ if (!plane->dst_w || !plane->dst_h) -+ return -EINVAL; -+ -+ return 0; -+} -+ - static void vc4_plane_atomic_update(struct drm_plane *plane, - struct drm_plane_state *old_state) - { - struct drm_plane_state *state = plane->state; -+ -+ /* -+ * Do NOT set now, as we haven't checked if the crtc is active or not. -+ * Set from vc4_plane_set_blank instead. -+ * -+ * If the CRTC is on (or going to be on) and we're enabled, -+ * then unblank. Otherwise, stay blank until CRTC enable. -+ */ -+ if (state->crtc->state->active) -+ vc4_plane_set_blank(plane, false); -+} -+ -+static void vc4_plane_atomic_disable(struct drm_plane *plane, -+ struct drm_plane_state *old_state) -+{ -+ struct drm_plane_state *state = plane->state; -+ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); -+ -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n", -+ plane->base.id, plane->name, -+ state->crtc_w, -+ state->crtc_h, -+ vc4_plane->mb.plane.vc_image_type, -+ state->crtc_x, -+ state->crtc_y); -+ vc4_plane_set_blank(plane, true); -+} -+ -+static bool plane_enabled(struct drm_plane_state *state) -+{ -+ return state->fb && state->crtc; -+} -+ -+static int vc4_plane_to_mb(struct drm_plane *plane, -+ struct mailbox_set_plane *mb, -+ struct drm_plane_state *state) -+{ - struct drm_framebuffer *fb = state->fb; - struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); - const struct drm_format_info *drm_fmt = fb->format; - const struct vc_image_format *vc_fmt = - vc4_get_vc_image_fmt(drm_fmt->format); -- struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); -- struct mailbox_set_plane *mb = &vc4_plane->mb; - int num_planes = fb->format->num_planes; - struct drm_display_mode *mode = &state->crtc->mode; - unsigned int rotation = SUPPORTED_ROTATIONS; -@@ -417,25 +544,7 @@ static void vc4_plane_atomic_update(stru - break; - } - -- /* FIXME: If the dest rect goes off screen then clip the src rect so we -- * don't have off-screen pixels. -- */ -- if (plane->type == DRM_PLANE_TYPE_CURSOR) { -- /* There is no scaling on the cursor plane, therefore the calcs -- * to alter the source crop as the cursor goes off the screen -- * are simple. -- */ -- if (mb->plane.dst_x + mb->plane.dst_w > mode->hdisplay) { -- mb->plane.dst_w = mode->hdisplay - mb->plane.dst_x; -- mb->plane.src_w = (mode->hdisplay - mb->plane.dst_x) -- << 16; -- } -- if (mb->plane.dst_y + mb->plane.dst_h > mode->vdisplay) { -- mb->plane.dst_h = mode->vdisplay - mb->plane.dst_y; -- mb->plane.src_h = (mode->vdisplay - mb->plane.dst_y) -- << 16; -- } -- } -+ vc4_fkms_margins_adj(state, &mb->plane); - - if (num_planes > 1) { - /* Assume this must be YUV */ -@@ -525,38 +634,19 @@ static void vc4_plane_atomic_update(stru - state->alpha, - state->normalized_zpos); - -- /* -- * Do NOT set now, as we haven't checked if the crtc is active or not. -- * Set from vc4_plane_set_blank instead. -- * -- * If the CRTC is on (or going to be on) and we're enabled, -- * then unblank. Otherwise, stay blank until CRTC enable. -- */ -- if (state->crtc->state->active) -- vc4_plane_set_blank(plane, false); -+ return 0; - } - --static void vc4_plane_atomic_disable(struct drm_plane *plane, -- struct drm_plane_state *old_state) -+static int vc4_plane_atomic_check(struct drm_plane *plane, -+ struct drm_plane_state *state) - { -- //struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -- struct drm_plane_state *state = plane->state; - struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); - -- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n", -- plane->base.id, plane->name, -- state->crtc_w, -- state->crtc_h, -- vc4_plane->mb.plane.vc_image_type, -- state->crtc_x, -- state->crtc_y); -- vc4_plane_set_blank(plane, true); --} -+ if (!plane_enabled(state)) -+ return 0; -+ -+ return vc4_plane_to_mb(plane, &vc4_plane->mb, state); - --static int vc4_plane_atomic_check(struct drm_plane *plane, -- struct drm_plane_state *state) --{ -- return 0; - } - - static void vc4_plane_destroy(struct drm_plane *plane) -@@ -878,8 +968,23 @@ vc4_crtc_mode_valid(struct drm_crtc *crt - static int vc4_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *state) - { -- DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", -- crtc->base.id); -+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state); -+ struct drm_connector *conn; -+ struct drm_connector_state *conn_state; -+ int i; -+ -+ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", crtc->base.id); -+ -+ for_each_new_connector_in_state(state->state, conn, conn_state, i) { -+ if (conn_state->crtc != crtc) -+ continue; -+ -+ vc4_state->margins.left = conn_state->tv.margins.left; -+ vc4_state->margins.right = conn_state->tv.margins.right; -+ vc4_state->margins.top = conn_state->tv.margins.top; -+ vc4_state->margins.bottom = conn_state->tv.margins.bottom; -+ break; -+ } - return 0; - } - -@@ -980,6 +1085,33 @@ static int vc4_page_flip(struct drm_crtc - return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx); - } - -+static struct drm_crtc_state * -+vc4_crtc_duplicate_state(struct drm_crtc *crtc) -+{ -+ struct vc4_crtc_state *vc4_state, *old_vc4_state; -+ -+ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL); -+ if (!vc4_state) -+ return NULL; -+ -+ old_vc4_state = to_vc4_crtc_state(crtc->state); -+ vc4_state->margins = old_vc4_state->margins; -+ -+ __drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base); -+ return &vc4_state->base; -+} -+ -+static void -+vc4_crtc_reset(struct drm_crtc *crtc) -+{ -+ if (crtc->state) -+ __drm_atomic_helper_crtc_destroy_state(crtc->state); -+ -+ crtc->state = kzalloc(sizeof(*crtc->state), GFP_KERNEL); -+ if (crtc->state) -+ crtc->state->crtc = crtc; -+} -+ - static int vc4_fkms_enable_vblank(struct drm_crtc *crtc) - { - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -@@ -1007,8 +1139,8 @@ static const struct drm_crtc_funcs vc4_c - .set_property = NULL, - .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ - .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ -- .reset = drm_atomic_helper_crtc_reset, -- .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, -+ .reset = vc4_crtc_reset, -+ .atomic_duplicate_state = vc4_crtc_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, - .enable_vblank = vc4_fkms_enable_vblank, - .disable_vblank = vc4_fkms_disable_vblank, -@@ -1267,6 +1399,13 @@ vc4_fkms_connector_init(struct drm_devic - connector->interlace_allowed = 0; - } - -+ /* Create and attach TV margin props to this connector. */ -+ ret = drm_mode_create_tv_margin_properties(dev); -+ if (ret) -+ return ERR_PTR(ret); -+ -+ drm_connector_attach_tv_margin_properties(connector); -+ - connector->polled = (DRM_CONNECTOR_POLL_CONNECT | - DRM_CONNECTOR_POLL_DISCONNECT); - diff --git a/target/linux/brcm2708/patches-4.19/950-0719-drm-vc4-Ensure-zpos-is-always-initialised.patch b/target/linux/brcm2708/patches-4.19/950-0719-drm-vc4-Ensure-zpos-is-always-initialised.patch deleted file mode 100644 index 2eba1bdd42..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0719-drm-vc4-Ensure-zpos-is-always-initialised.patch +++ /dev/null @@ -1,26 +0,0 @@ -From cf80e05ebb55c121c1567ac42b9e1a885fc346a3 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 19 Jul 2019 17:49:00 +0100 -Subject: [PATCH 719/806] drm/vc4: Ensure zpos is always initialised - -The compiler is warning that default_zpos can be used -uninitialised as there is no default case to catch all plane -types. -No other plane types should ever be presented to vc4_fkms_plane_init, -but add a default case regardless. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -773,6 +773,7 @@ static struct drm_plane *vc4_fkms_plane_ - * other layers as requested by KMS. - */ - switch (type) { -+ default: - case DRM_PLANE_TYPE_PRIMARY: - default_zpos = 0; - break; diff --git a/target/linux/brcm2708/patches-4.19/950-0719-overlays-mcp23017-rename-the-GPIO-pins-node-with-the.patch b/target/linux/brcm2708/patches-4.19/950-0719-overlays-mcp23017-rename-the-GPIO-pins-node-with-the.patch new file mode 100644 index 0000000000..09dbf4a021 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0719-overlays-mcp23017-rename-the-GPIO-pins-node-with-the.patch @@ -0,0 +1,37 @@ +From 9802671acf4250d6541d175ba599da03cee8acc1 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 5 Sep 2019 17:36:38 +0100 +Subject: [PATCH] overlays: mcp23017: rename the GPIO pins node with + the device + +In order to allow the overlay to be loaded multiple times the +GPIO node for the interrupt line needs to be unique. +Rename it based on the MCP23017 I2C address + +https://github.com/raspberrypi/linux/issues/3207 + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts +@@ -16,7 +16,7 @@ + fragment@1 { + target = <&gpio>; + __overlay__ { +- mcp23017_pins: mcp23017_pins { ++ mcp23017_pins: mcp23017_pins@20 { + brcm,pins = <4>; + brcm,function = <0>; + }; +@@ -55,7 +55,7 @@ + __overrides__ { + gpiopin = <&mcp23017_pins>,"brcm,pins:0", + <&mcp23017>,"interrupts:0"; +- addr = <&mcp23017>,"reg:0"; ++ addr = <&mcp23017>,"reg:0", <&mcp23017_pins>,"reg:0"; + mcp23008 = <0>,"=3"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.19/950-0720-dts-bcm2838-add-missing-properties-for-pmu-and-gic-n.patch b/target/linux/brcm2708/patches-4.19/950-0720-dts-bcm2838-add-missing-properties-for-pmu-and-gic-n.patch deleted file mode 100644 index d850ca7512..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0720-dts-bcm2838-add-missing-properties-for-pmu-and-gic-n.patch +++ /dev/null @@ -1,45 +0,0 @@ -From a78d4d81c585a5de61e7fc7d574e6e3f769c18a6 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Wed, 24 Jul 2019 14:36:53 +0100 -Subject: [PATCH 720/806] dts: bcm2838: add missing properties for pmu and gic - nodes - -The GIC has a virtual interface maintenance interrupt and the PMU -interrupts need affinity mappings as they are wired to generic SPIs. - -Also, delete incorrect PMU compatible string. - -Signed-off-by: Jonathan Bell ---- - arch/arm/boot/dts/bcm2838.dtsi | 9 ++++----- - 1 file changed, 4 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/bcm2838.dtsi -+++ b/arch/arm/boot/dts/bcm2838.dtsi -@@ -35,6 +35,8 @@ - <0x40042000 0x2000>, - <0x40044000 0x2000>, - <0x40046000 0x2000>; -+ interrupts = ; - }; - - thermal: thermal@7d5d2200 { -@@ -222,15 +224,12 @@ - }; - - arm-pmu { -- /* -- * N.B. the A72 PMU support only exists in arch/arm64, hence -- * the fallback to the A53 version. -- */ -- compatible = "arm,cortex-a72-pmu", "arm,cortex-a53-pmu"; -+ compatible = "arm,cortex-a72-pmu"; - interrupts = , - , - , - ; -+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - timer { diff --git a/target/linux/brcm2708/patches-4.19/950-0720-overlays-mcp23017-Add-option-for-not-connecting-the-.patch b/target/linux/brcm2708/patches-4.19/950-0720-overlays-mcp23017-Add-option-for-not-connecting-the-.patch new file mode 100644 index 0000000000..e6376d7f68 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0720-overlays-mcp23017-Add-option-for-not-connecting-the-.patch @@ -0,0 +1,66 @@ +From b37ac8c50684c3517fb9c6f737e7ea444a7d7405 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 5 Sep 2019 17:41:46 +0100 +Subject: [PATCH] overlays: mcp23017: Add option for not connecting the + int GPIO + +The interrupt GPIO is optional to the driver, therefore add an +option to not configure it. + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/overlays/README | 1 + + .../boot/dts/overlays/mcp23017-overlay.dts | 21 +++++++++++++------ + 2 files changed, 16 insertions(+), 6 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1427,6 +1427,7 @@ Params: gpiopin Gpio pin + addr I2C address of the MCP23017 (default: 0x20) + + mcp23008 Configure an MCP23008 instead. ++ noints Disable the interrupt GPIO line. + + + Name: mcp23s17 +--- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts +@@ -34,11 +34,6 @@ + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; +- #interrupt-cells=<2>; +- interrupt-parent = <&gpio>; +- interrupts = <4 2>; +- interrupt-controller; +- microchip,irq-mirror; + + status = "okay"; + }; +@@ -52,11 +47,25 @@ + }; + }; + ++ fragment@4 { ++ target = <&i2c1>; ++ __overlay__ { ++ mcp23017_irq: mcp@20 { ++ #interrupt-cells=<2>; ++ interrupt-parent = <&gpio>; ++ interrupts = <4 2>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ }; ++ + __overrides__ { + gpiopin = <&mcp23017_pins>,"brcm,pins:0", +- <&mcp23017>,"interrupts:0"; ++ <&mcp23017_irq>,"interrupts:0"; + addr = <&mcp23017>,"reg:0", <&mcp23017_pins>,"reg:0"; + mcp23008 = <0>,"=3"; ++ noints = <0>,"!1!4"; + }; + }; + diff --git a/target/linux/brcm2708/patches-4.19/950-0721-adds-the-Hifiberry-DAC-ADC-PRO-version.patch b/target/linux/brcm2708/patches-4.19/950-0721-adds-the-Hifiberry-DAC-ADC-PRO-version.patch deleted file mode 100644 index 2e52e9c0eb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0721-adds-the-Hifiberry-DAC-ADC-PRO-version.patch +++ /dev/null @@ -1,701 +0,0 @@ -From bab5f8832c6b2859caea1cb5af1ffcb6276c2f74 Mon Sep 17 00:00:00 2001 -From: Joerg Schambacher -Date: Tue, 23 Jul 2019 16:57:35 +0200 -Subject: [PATCH 721/806] adds the Hifiberry DAC+ADC PRO version - -This adds the driver for the DAC+ADC PRO version of the Hifiberry soundcard with software controlled PCM1863 ADC -Signed-off-by: Joerg Schambacher joerg@i2audio.com ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 21 + - .../hifiberry-dacplusadcpro-overlay.dts | 64 +++ - sound/soc/bcm/Kconfig | 8 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/hifiberry_dacplusadcpro.c | 538 ++++++++++++++++++ - 9 files changed, 637 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts - create mode 100644 sound/soc/bcm/hifiberry_dacplusadcpro.c - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -53,6 +53,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - hifiberry-dac.dtbo \ - hifiberry-dacplus.dtbo \ - hifiberry-dacplusadc.dtbo \ -+ hifiberry-dacplusadcpro.dtbo \ - hifiberry-digi.dtbo \ - hifiberry-digi-pro.dtbo \ - hy28a.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -883,6 +883,27 @@ Params: 24db_digital_gain Allow ga - master for bit clock and frame clock. - - -+Name: hifiberry-dacplusadcpro -+Info: Configures the HifiBerry DAC+ADC PRO audio card -+Load: dtoverlay=hifiberry-dacplusadcpro,= -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=hifiberry-dacplusadcpro,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ slave Force DAC+ADC Pro into slave mode, using Pi as -+ master for bit clock and frame clock. -+ -+ - Name: hifiberry-digi - Info: Configures the HifiBerry Digi and Digi+ audio card - Load: dtoverlay=hifiberry-digi ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts -@@ -0,0 +1,64 @@ -+// Definitions for HiFiBerry DAC+ADC PRO -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ dacpro_osc: dacpro_osc { -+ compatible = "hifiberry,dacpro-clk"; -+ #clock-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ hb_dac: pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ clocks = <&dacpro_osc>; -+ status = "okay"; -+ }; -+ hb_adc: pcm186x@4a { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm1863"; -+ reg = <0x4a>; -+ clocks = <&dacpro_osc>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ hifiberry_dacplusadcpro: __overlay__ { -+ compatible = "hifiberry,hifiberry-dacplusadcpro"; -+ audio-codec = <&hb_dac &hb_adc>; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = -+ <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,24db_digital_gain?"; -+ slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?"; -+ }; -+}; ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -48,6 +48,14 @@ config SND_BCM2708_SOC_HIFIBERRY_DACPLUS - help - Say Y or M if you want to add support for HifiBerry DAC+ADC. - -+config SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO -+ tristate "Support for HifiBerry DAC+ADC PRO" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM512x_I2C -+ select SND_SOC_PCM186X_I2C -+ help -+ Say Y or M if you want to add support for HifiBerry DAC+ADC PRO. -+ - config SND_BCM2708_SOC_HIFIBERRY_DIGI - tristate "Support for HifiBerry Digi" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -14,6 +14,7 @@ snd-soc-googlevoicehat-codec-objs := goo - # BCM2708 Machine Support - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o - snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o -+snd-soc-hifiberry-dacplusadcpro-objs := hifiberry_dacplusadcpro.o - snd-soc-justboom-dac-objs := justboom-dac.o - snd-soc-rpi-cirrus-objs := rpi-cirrus.o - snd-soc-rpi-proto-objs := rpi-proto.o -@@ -38,6 +39,7 @@ snd-soc-rpi-wm8804-soundcard-objs := rpi - obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO) += snd-soc-hifiberry-dacplusadcpro.o - obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o ---- /dev/null -+++ b/sound/soc/bcm/hifiberry_dacplusadcpro.c -@@ -0,0 +1,538 @@ -+/* -+ * ASoC Driver for HiFiBerry DAC+ / DAC Pro with ADC PRO Version (SW control) -+ * -+ * Author: Daniel Matuschek, Stuart MacLean -+ * Copyright 2014-2015 -+ * based on code by Florian Meier -+ * ADC added by Joerg Schambacher -+ * Copyright 2018-19 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/pcm512x.h" -+#include "../codecs/pcm186x.h" -+ -+#define HIFIBERRY_DACPRO_NOCLOCK 0 -+#define HIFIBERRY_DACPRO_CLK44EN 1 -+#define HIFIBERRY_DACPRO_CLK48EN 2 -+ -+struct pcm512x_priv { -+ struct regmap *regmap; -+ struct clk *sclk; -+}; -+ -+/* Clock rate of CLK44EN attached to GPIO6 pin */ -+#define CLK_44EN_RATE 22579200UL -+/* Clock rate of CLK48EN attached to GPIO3 pin */ -+#define CLK_48EN_RATE 24576000UL -+ -+static bool slave; -+static bool snd_rpi_hifiberry_is_dacpro; -+static bool digital_gain_0db_limit = true; -+ -+static const unsigned int pcm186x_adc_input_channel_sel_value[] = { -+ 0x00, 0x01, 0x02, 0x03, 0x10 -+}; -+ -+static const char * const pcm186x_adcl_input_channel_sel_text[] = { -+ "No Select", -+ "VINL1[SE]", /* Default for ADCL */ -+ "VINL2[SE]", -+ "VINL2[SE] + VINL1[SE]", -+ "{VIN1P, VIN1M}[DIFF]" -+}; -+ -+static const char * const pcm186x_adcr_input_channel_sel_text[] = { -+ "No Select", -+ "VINR1[SE]", /* Default for ADCR */ -+ "VINR2[SE]", -+ "VINR2[SE] + VINR1[SE]", -+ "{VIN2P, VIN2M}[DIFF]" -+}; -+ -+static const struct soc_enum pcm186x_adc_input_channel_sel[] = { -+ SOC_VALUE_ENUM_SINGLE(PCM186X_ADC1_INPUT_SEL_L, 0, -+ PCM186X_ADC_INPUT_SEL_MASK, -+ ARRAY_SIZE(pcm186x_adcl_input_channel_sel_text), -+ pcm186x_adcl_input_channel_sel_text, -+ pcm186x_adc_input_channel_sel_value), -+ SOC_VALUE_ENUM_SINGLE(PCM186X_ADC1_INPUT_SEL_R, 0, -+ PCM186X_ADC_INPUT_SEL_MASK, -+ ARRAY_SIZE(pcm186x_adcr_input_channel_sel_text), -+ pcm186x_adcr_input_channel_sel_text, -+ pcm186x_adc_input_channel_sel_value), -+}; -+ -+static const unsigned int pcm186x_mic_bias_sel_value[] = { -+ 0x00, 0x01, 0x11 -+}; -+ -+static const char * const pcm186x_mic_bias_sel_text[] = { -+ "Mic Bias off", -+ "Mic Bias on", -+ "Mic Bias with Bypass Resistor" -+}; -+ -+static const struct soc_enum pcm186x_mic_bias_sel[] = { -+ SOC_VALUE_ENUM_SINGLE(PCM186X_MIC_BIAS_CTRL, 0, -+ GENMASK(4, 0), -+ ARRAY_SIZE(pcm186x_mic_bias_sel_text), -+ pcm186x_mic_bias_sel_text, -+ pcm186x_mic_bias_sel_value), -+}; -+ -+static const unsigned int pcm186x_gain_sel_value[] = { -+ 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef, -+ 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, -+ 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff, -+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, -+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, -+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, -+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, -+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, -+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, -+ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, -+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, -+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, -+ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, -+ 0x50 -+}; -+ -+static const char * const pcm186x_gain_sel_text[] = { -+ "-12.0dB", "-11.5dB", "-11.0dB", "-10.5dB", "-10.0dB", "-9.5dB", -+ "-9.0dB", "-8.5dB", "-8.0dB", "-7.5dB", "-7.0dB", "-6.5dB", -+ "-6.0dB", "-5.5dB", "-5.0dB", "-4.5dB", "-4.0dB", "-3.5dB", -+ "-3.0dB", "-2.5dB", "-2.0dB", "-1.5dB", "-1.0dB", "-0.5dB", -+ "0.0dB", "0.5dB", "1.0dB", "1.5dB", "2.0dB", "2.5dB", -+ "3.0dB", "3.5dB", "4.0dB", "4.5dB", "5.0dB", "5.5dB", -+ "6.0dB", "6.5dB", "7.0dB", "7.5dB", "8.0dB", "8.5dB", -+ "9.0dB", "9.5dB", "10.0dB", "10.5dB", "11.0dB", "11.5dB", -+ "12.0dB", "12.5dB", "13.0dB", "13.5dB", "14.0dB", "14.5dB", -+ "15.0dB", "15.5dB", "16.0dB", "16.5dB", "17.0dB", "17.5dB", -+ "18.0dB", "18.5dB", "19.0dB", "19.5dB", "20.0dB", "20.5dB", -+ "21.0dB", "21.5dB", "22.0dB", "22.5dB", "23.0dB", "23.5dB", -+ "24.0dB", "24.5dB", "25.0dB", "25.5dB", "26.0dB", "26.5dB", -+ "27.0dB", "27.5dB", "28.0dB", "28.5dB", "29.0dB", "29.5dB", -+ "30.0dB", "30.5dB", "31.0dB", "31.5dB", "32.0dB", "32.5dB", -+ "33.0dB", "33.5dB", "34.0dB", "34.5dB", "35.0dB", "35.5dB", -+ "36.0dB", "36.5dB", "37.0dB", "37.5dB", "38.0dB", "38.5dB", -+ "39.0dB", "39.5dB", "40.0dB"}; -+ -+static const struct soc_enum pcm186x_gain_sel[] = { -+ SOC_VALUE_ENUM_SINGLE(PCM186X_PGA_VAL_CH1_L, 0, -+ 0xff, -+ ARRAY_SIZE(pcm186x_gain_sel_text), -+ pcm186x_gain_sel_text, -+ pcm186x_gain_sel_value), -+ SOC_VALUE_ENUM_SINGLE(PCM186X_PGA_VAL_CH1_R, 0, -+ 0xff, -+ ARRAY_SIZE(pcm186x_gain_sel_text), -+ pcm186x_gain_sel_text, -+ pcm186x_gain_sel_value), -+}; -+ -+static const struct snd_kcontrol_new pcm1863_snd_controls_card[] = { -+ SOC_ENUM("ADC Left Input", pcm186x_adc_input_channel_sel[0]), -+ SOC_ENUM("ADC Right Input", pcm186x_adc_input_channel_sel[1]), -+ SOC_ENUM("ADC Mic Bias", pcm186x_mic_bias_sel), -+ SOC_ENUM("PGA Gain Left", pcm186x_gain_sel[0]), -+ SOC_ENUM("PGA Gain Right", pcm186x_gain_sel[1]), -+}; -+ -+static int pcm1863_add_controls(struct snd_soc_component *component) -+{ -+ snd_soc_add_component_controls(component, -+ pcm1863_snd_controls_card, -+ ARRAY_SIZE(pcm1863_snd_controls_card)); -+ return 0; -+} -+ -+static void snd_rpi_hifiberry_dacplusadcpro_select_clk( -+ struct snd_soc_component *component, int clk_id) -+{ -+ switch (clk_id) { -+ case HIFIBERRY_DACPRO_NOCLOCK: -+ snd_soc_component_update_bits(component, -+ PCM512x_GPIO_CONTROL_1, 0x24, 0x00); -+ break; -+ case HIFIBERRY_DACPRO_CLK44EN: -+ snd_soc_component_update_bits(component, -+ PCM512x_GPIO_CONTROL_1, 0x24, 0x20); -+ break; -+ case HIFIBERRY_DACPRO_CLK48EN: -+ snd_soc_component_update_bits(component, -+ PCM512x_GPIO_CONTROL_1, 0x24, 0x04); -+ break; -+ } -+} -+ -+static void snd_rpi_hifiberry_dacplusadcpro_clk_gpio(struct snd_soc_component *component) -+{ -+ snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x24, 0x24); -+ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_3, 0x0f, 0x02); -+ snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_6, 0x0f, 0x02); -+} -+ -+static bool snd_rpi_hifiberry_dacplusadcpro_is_sclk(struct snd_soc_component *component) -+{ -+ unsigned int sck; -+ -+ snd_soc_component_read(component, PCM512x_RATE_DET_4, &sck); -+ return (!(sck & 0x40)); -+} -+ -+static bool snd_rpi_hifiberry_dacplusadcpro_is_sclk_sleep( -+ struct snd_soc_component *component) -+{ -+ msleep(2); -+ return snd_rpi_hifiberry_dacplusadcpro_is_sclk(component); -+} -+ -+static bool snd_rpi_hifiberry_dacplusadcpro_is_pro_card(struct snd_soc_component *component) -+{ -+ bool isClk44EN, isClk48En, isNoClk; -+ -+ snd_rpi_hifiberry_dacplusadcpro_clk_gpio(component); -+ -+ snd_rpi_hifiberry_dacplusadcpro_select_clk(component, HIFIBERRY_DACPRO_CLK44EN); -+ isClk44EN = snd_rpi_hifiberry_dacplusadcpro_is_sclk_sleep(component); -+ -+ snd_rpi_hifiberry_dacplusadcpro_select_clk(component, HIFIBERRY_DACPRO_NOCLOCK); -+ isNoClk = snd_rpi_hifiberry_dacplusadcpro_is_sclk_sleep(component); -+ -+ snd_rpi_hifiberry_dacplusadcpro_select_clk(component, HIFIBERRY_DACPRO_CLK48EN); -+ isClk48En = snd_rpi_hifiberry_dacplusadcpro_is_sclk_sleep(component); -+ -+ return (isClk44EN && isClk48En && !isNoClk); -+} -+ -+static int snd_rpi_hifiberry_dacplusadcpro_clk_for_rate(int sample_rate) -+{ -+ int type; -+ -+ switch (sample_rate) { -+ case 11025: -+ case 22050: -+ case 44100: -+ case 88200: -+ case 176400: -+ case 352800: -+ type = HIFIBERRY_DACPRO_CLK44EN; -+ break; -+ default: -+ type = HIFIBERRY_DACPRO_CLK48EN; -+ break; -+ } -+ return type; -+} -+ -+static void snd_rpi_hifiberry_dacplusadcpro_set_sclk(struct snd_soc_component *component, -+ int sample_rate) -+{ -+ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); -+ -+ if (!IS_ERR(pcm512x->sclk)) { -+ int ctype; -+ -+ ctype = snd_rpi_hifiberry_dacplusadcpro_clk_for_rate(sample_rate); -+ clk_set_rate(pcm512x->sclk, (ctype == HIFIBERRY_DACPRO_CLK44EN) -+ ? CLK_44EN_RATE : CLK_48EN_RATE); -+ snd_rpi_hifiberry_dacplusadcpro_select_clk(component, ctype); -+ } -+} -+ -+static int snd_rpi_hifiberry_dacplusadcpro_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_component *dac = rtd->codec_dais[0]->component; -+ struct snd_soc_component *adc = rtd->codec_dais[1]->component; -+ struct snd_soc_dai_driver *adc_driver = rtd->codec_dais[1]->driver; -+ struct pcm512x_priv *priv; -+ int ret; -+ -+ if (slave) -+ snd_rpi_hifiberry_is_dacpro = false; -+ else -+ snd_rpi_hifiberry_is_dacpro = -+ snd_rpi_hifiberry_dacplusadcpro_is_pro_card(dac); -+ -+ if (snd_rpi_hifiberry_is_dacpro) { -+ struct snd_soc_dai_link *dai = rtd->dai_link; -+ -+ dai->name = "HiFiBerry DAC+ADC Pro"; -+ dai->stream_name = "HiFiBerry DAC+ADC Pro HiFi"; -+ -+ // set DAC DAI configuration -+ ret = snd_soc_dai_set_fmt(rtd->codec_dais[0], -+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBM_CFM); -+ if (ret < 0) -+ return ret; -+ -+ // set ADC DAI configuration -+ ret = snd_soc_dai_set_fmt(rtd->codec_dais[1], -+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBS_CFS); -+ if (ret < 0) -+ return ret; -+ -+ // set CPU DAI configuration -+ ret = snd_soc_dai_set_fmt(rtd->cpu_dai, -+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); -+ if (ret < 0) -+ return ret; -+ -+ snd_soc_component_update_bits(dac, PCM512x_BCLK_LRCLK_CFG, 0x31, 0x11); -+ snd_soc_component_update_bits(dac, PCM512x_MASTER_MODE, 0x03, 0x03); -+ snd_soc_component_update_bits(dac, PCM512x_MASTER_CLKDIV_2, 0x7f, 63); -+ } else { -+ priv = snd_soc_component_get_drvdata(dac); -+ priv->sclk = ERR_PTR(-ENOENT); -+ } -+ -+ /* disable 24bit mode as long as I2S module does not have sign extension fixed */ -+ adc_driver->capture.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE; -+ -+ snd_soc_component_update_bits(dac, PCM512x_GPIO_EN, 0x08, 0x08); -+ snd_soc_component_update_bits(dac, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); -+ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); -+ -+ ret = pcm1863_add_controls(adc); -+ if (ret < 0) -+ dev_warn(rtd->dev, "Failed to add pcm1863 controls: %d\n", -+ ret); -+ -+ /* set GPIO2 to output, GPIO3 input */ -+ snd_soc_component_write(adc, PCM186X_GPIO3_2_CTRL, 0x00); -+ snd_soc_component_write(adc, PCM186X_GPIO3_2_DIR_CTRL, 0x04); -+ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x40); -+ -+ if (digital_gain_0db_limit) { -+ int ret; -+ struct snd_soc_card *card = rtd->card; -+ -+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); -+ } -+ -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_dacplusadcpro_update_rate_den( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_component *component = rtd->codec_dais[0]->component; /* only use DAC */ -+ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component); -+ struct snd_ratnum *rats_no_pll; -+ unsigned int num = 0, den = 0; -+ int err; -+ -+ rats_no_pll = devm_kzalloc(rtd->dev, sizeof(*rats_no_pll), GFP_KERNEL); -+ if (!rats_no_pll) -+ return -ENOMEM; -+ -+ rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64; -+ rats_no_pll->den_min = 1; -+ rats_no_pll->den_max = 128; -+ rats_no_pll->den_step = 1; -+ -+ err = snd_interval_ratnum(hw_param_interval(params, -+ SNDRV_PCM_HW_PARAM_RATE), 1, rats_no_pll, &num, &den); -+ if (err >= 0 && den) { -+ params->rate_num = num; -+ params->rate_den = den; -+ } -+ -+ devm_kfree(rtd->dev, rats_no_pll); -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_dacplusadcpro_hw_params( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ int ret = 0; -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ int channels = params_channels(params); -+ int width = 32; -+ struct snd_soc_component *dac = rtd->codec_dais[0]->component; -+ -+ if (snd_rpi_hifiberry_is_dacpro) { -+ -+ width = snd_pcm_format_physical_width(params_format(params)); -+ -+ snd_rpi_hifiberry_dacplusadcpro_set_sclk(dac, -+ params_rate(params)); -+ -+ ret = snd_rpi_hifiberry_dacplusadcpro_update_rate_den( -+ substream, params); -+ if (ret) -+ return ret; -+ } -+ -+ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x03, 0x03, -+ channels, width); -+ if (ret) -+ return ret; -+ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dais[0], 0x03, 0x03, -+ channels, width); -+ if (ret) -+ return ret; -+ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dais[1], 0x03, 0x03, -+ channels, width); -+ return ret; -+} -+ -+static int snd_rpi_hifiberry_dacplusadcpro_startup( -+ struct snd_pcm_substream *substream) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_component *dac = rtd->codec_dais[0]->component; -+ struct snd_soc_component *adc = rtd->codec_dais[1]->component; -+ -+ /* switch on respective LED */ -+ if (!substream->stream) -+ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); -+ else -+ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x40); -+ return 0; -+} -+ -+static void snd_rpi_hifiberry_dacplusadcpro_shutdown( -+ struct snd_pcm_substream *substream) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_component *dac = rtd->codec_dais[0]->component; -+ struct snd_soc_component *adc = rtd->codec_dais[1]->component; -+ -+ /* switch off respective LED */ -+ if (!substream->stream) -+ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); -+ else -+ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x00); -+} -+ -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_hifiberry_dacplusadcpro_ops = { -+ .hw_params = snd_rpi_hifiberry_dacplusadcpro_hw_params, -+ .startup = snd_rpi_hifiberry_dacplusadcpro_startup, -+ .shutdown = snd_rpi_hifiberry_dacplusadcpro_shutdown, -+}; -+ -+static struct snd_soc_dai_link_component snd_rpi_hifiberry_dacplusadcpro_codecs[] = { -+ { -+ .name = "pcm512x.1-004d", -+ .dai_name = "pcm512x-hifi", -+ }, -+ { -+ .name = "pcm186x.1-004a", -+ .dai_name = "pcm1863-aif", -+ }, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_hifiberry_dacplusadcpro_dai[] = { -+{ -+ .name = "HiFiBerry DAC+ADC PRO", -+ .stream_name = "HiFiBerry DAC+ADC PRO HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .platform_name = "bcm2708-i2s.0", -+ .codecs = snd_rpi_hifiberry_dacplusadcpro_codecs, -+ .num_codecs = 2, -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_hifiberry_dacplusadcpro_ops, -+ .init = snd_rpi_hifiberry_dacplusadcpro_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_hifiberry_dacplusadcpro = { -+ .name = "snd_rpi_hifiberry_dacplusadcpro", -+ .driver_name = "HifiberryDacpAdcPro", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_hifiberry_dacplusadcpro_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dacplusadcpro_dai), -+}; -+ -+static int snd_rpi_hifiberry_dacplusadcpro_probe(struct platform_device *pdev) -+{ -+ int ret = 0, i = 0; -+ struct snd_soc_card *card = &snd_rpi_hifiberry_dacplusadcpro; -+ -+ snd_rpi_hifiberry_dacplusadcpro.dev = &pdev->dev; -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai; -+ -+ dai = &snd_rpi_hifiberry_dacplusadcpro_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ if (i2s_node) { -+ for (i = 0; i < card->num_links; i++) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ } -+ } -+ digital_gain_0db_limit = !of_property_read_bool( -+ pdev->dev.of_node, "hifiberry-dacplusadcpro,24db_digital_gain"); -+ slave = of_property_read_bool(pdev->dev.of_node, -+ "hifiberry-dacplusadcpro,slave"); -+ ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplusadcpro); -+ if (ret && ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static const struct of_device_id snd_rpi_hifiberry_dacplusadcpro_of_match[] = { -+ { .compatible = "hifiberry,hifiberry-dacplusadcpro", }, -+ {}, -+}; -+ -+MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplusadcpro_of_match); -+ -+static struct platform_driver snd_rpi_hifiberry_dacplusadcpro_driver = { -+ .driver = { -+ .name = "snd-rpi-hifiberry-dacplusadcpro", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_hifiberry_dacplusadcpro_of_match, -+ }, -+ .probe = snd_rpi_hifiberry_dacplusadcpro_probe, -+}; -+ -+module_platform_driver(snd_rpi_hifiberry_dacplusadcpro_driver); -+ -+MODULE_AUTHOR("Joerg Schambacher "); -+MODULE_AUTHOR("Daniel Matuschek "); -+MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+ADC"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.19/950-0721-v4l2-Add-a-Greyworld-AWB-mode.patch b/target/linux/brcm2708/patches-4.19/950-0721-v4l2-Add-a-Greyworld-AWB-mode.patch new file mode 100644 index 0000000000..aca98372a2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0721-v4l2-Add-a-Greyworld-AWB-mode.patch @@ -0,0 +1,34 @@ +From c8f63d006ff5f84ad629f4c06cdc9fee34fdfe3d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 6 Sep 2019 15:04:51 +0100 +Subject: [PATCH] v4l2: Add a Greyworld AWB mode. + +Adds a simple greyworld white balance preset, mainly for use +with cameras without an IR filter (eg Raspberry Pi NoIR) + +Signed-off-by: Dave Stevenson +--- + drivers/media/v4l2-core/v4l2-ctrls.c | 1 + + include/uapi/linux/v4l2-controls.h | 1 + + 2 files changed, 2 insertions(+) + +--- a/drivers/media/v4l2-core/v4l2-ctrls.c ++++ b/drivers/media/v4l2-core/v4l2-ctrls.c +@@ -275,6 +275,7 @@ const char * const *v4l2_ctrl_get_menu(u + "Flash", + "Cloudy", + "Shade", ++ "Greyworld", + NULL, + }; + static const char * const camera_iso_sensitivity_auto[] = { +--- a/include/uapi/linux/v4l2-controls.h ++++ b/include/uapi/linux/v4l2-controls.h +@@ -815,6 +815,7 @@ enum v4l2_auto_n_preset_white_balance { + V4L2_WHITE_BALANCE_FLASH = 7, + V4L2_WHITE_BALANCE_CLOUDY = 8, + V4L2_WHITE_BALANCE_SHADE = 9, ++ V4L2_WHITE_BALANCE_GREYWORLD = 10, + }; + + #define V4L2_CID_WIDE_DYNAMIC_RANGE (V4L2_CID_CAMERA_CLASS_BASE+21) diff --git a/target/linux/brcm2708/patches-4.19/950-0722-codecs-Correct-Katana-minimum-volume.patch b/target/linux/brcm2708/patches-4.19/950-0722-codecs-Correct-Katana-minimum-volume.patch deleted file mode 100644 index 0ec68610dc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0722-codecs-Correct-Katana-minimum-volume.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 43866e3396623775215943f3062a98c642fcae95 Mon Sep 17 00:00:00 2001 -From: allo-com -Date: Mon, 29 Jul 2019 15:06:57 +0530 -Subject: [PATCH 722/806] codecs: Correct Katana minimum volume - -Update Katana minimum volume to get the exact 0.5 dB value in each step. - -Signed-off-by: Sudeep Kumar ---- - sound/soc/bcm/allo-katana-codec.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/sound/soc/bcm/allo-katana-codec.c -+++ b/sound/soc/bcm/allo-katana-codec.c -@@ -126,7 +126,7 @@ static SOC_VALUE_ENUM_SINGLE_DECL(katana - katana_codec_deemphasis_texts, - katana_codec_deemphasis_values); - --static const SNDRV_CTL_TLVD_DECLARE_DB_MINMAX(master_tlv, -12700, 0); -+static const SNDRV_CTL_TLVD_DECLARE_DB_MINMAX(master_tlv, -12750, 0); - - static const struct snd_kcontrol_new katana_codec_controls[] = { - SOC_DOUBLE_R_TLV("Master Playback Volume", KATANA_CODEC_VOLUME_1, diff --git a/target/linux/brcm2708/patches-4.19/950-0722-staging-bcm2835-camera-Add-greyworld-AWB-mode.patch b/target/linux/brcm2708/patches-4.19/950-0722-staging-bcm2835-camera-Add-greyworld-AWB-mode.patch new file mode 100644 index 0000000000..a1e4149771 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0722-staging-bcm2835-camera-Add-greyworld-AWB-mode.patch @@ -0,0 +1,48 @@ +From b5ec436637af67f37efad1550945b750101527d4 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 6 Sep 2019 15:13:06 +0100 +Subject: [PATCH] staging: bcm2835-camera: Add greyworld AWB mode + +This is mainly used for the NoIR camera which has no IR +filter and can completely confuse normal AWB presets. + +Signed-off-by: Dave Stevenson +--- + drivers/staging/vc04_services/bcm2835-camera/controls.c | 8 ++++++-- + .../staging/vc04_services/vchiq-mmal/mmal-parameters.h | 1 + + 2 files changed, 7 insertions(+), 2 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c ++++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c +@@ -481,6 +481,10 @@ static int ctrl_set_awb_mode(struct bm28 + case V4L2_WHITE_BALANCE_SHADE: + u32_value = MMAL_PARAM_AWBMODE_SHADE; + break; ++ ++ case V4L2_WHITE_BALANCE_GREYWORLD: ++ u32_value = MMAL_PARAM_AWBMODE_GREYWORLD; ++ break; + } + + return vchiq_mmal_port_parameter_set(dev->instance, control, +@@ -1008,8 +1012,8 @@ static const struct bm2835_mmal_v4l2_ctr + { + V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, + MMAL_CONTROL_TYPE_STD_MENU, +- ~0x3ff, V4L2_WHITE_BALANCE_SHADE, V4L2_WHITE_BALANCE_AUTO, 0, +- NULL, ++ ~0x7ff, V4L2_WHITE_BALANCE_GREYWORLD, V4L2_WHITE_BALANCE_AUTO, ++ 0, NULL, + MMAL_PARAMETER_AWB_MODE, + &ctrl_set_awb_mode, + false +--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h ++++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h +@@ -313,6 +313,7 @@ enum mmal_parameter_awbmode { + MMAL_PARAM_AWBMODE_INCANDESCENT, + MMAL_PARAM_AWBMODE_FLASH, + MMAL_PARAM_AWBMODE_HORIZON, ++ MMAL_PARAM_AWBMODE_GREYWORLD, + }; + + enum mmal_parameter_imagefx { diff --git a/target/linux/brcm2708/patches-4.19/950-0723-PCI-brcmstb-Fix-compilation-warning.patch b/target/linux/brcm2708/patches-4.19/950-0723-PCI-brcmstb-Fix-compilation-warning.patch new file mode 100644 index 0000000000..978a656100 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0723-PCI-brcmstb-Fix-compilation-warning.patch @@ -0,0 +1,24 @@ +From 2245d8c6d0feaa94ca55fa8ecfe3ca9c0c05c566 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 9 Sep 2019 10:16:08 +0100 +Subject: [PATCH] PCI: brcmstb: Fix compilation warning + +Fixes: ea2c11a187c0e248343452846457b94715e04969 +Fixes: https://github.com/raspberrypi/linux/issues/3216 + +Signed-off-by: Phil Elwell +--- + drivers/pci/controller/pcie-brcmstb.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/controller/pcie-brcmstb.c ++++ b/drivers/pci/controller/pcie-brcmstb.c +@@ -653,7 +653,7 @@ static int brcmstb_platform_notifier(str + ret = of_dma_configure(dev, dev->of_node, true); + if (ret) { + dev_err(dev, "of_dma_configure() failed: %d\n", ret); +- return; ++ return ret; + } + } + brcm_set_dma_ops(dev); diff --git a/target/linux/brcm2708/patches-4.19/950-0723-drm-vc4-A-present-but-empty-dmas-disables-audio.patch b/target/linux/brcm2708/patches-4.19/950-0723-drm-vc4-A-present-but-empty-dmas-disables-audio.patch deleted file mode 100644 index b84ed733a7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0723-drm-vc4-A-present-but-empty-dmas-disables-audio.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 8befbf55f2668a4dae739588ed3c0b0d06fccacd Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 31 Jul 2019 17:36:34 +0100 -Subject: [PATCH 723/806] drm/vc4: A present but empty dmas disables audio - -Overlays are unable to remove properties in the base DTB, but they -can overwrite them. Allow a present but empty 'dmas' property -to also disable the HDMI audio interface. - -See: https://github.com/raspberrypi/linux/issues/2489 - -Signed-off-by: Phil Elwell ---- - drivers/gpu/drm/vc4/vc4_hdmi.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_hdmi.c -+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -1087,10 +1087,12 @@ static int vc4_hdmi_audio_init(struct vc - struct device *dev = &hdmi->pdev->dev; - const __be32 *addr; - int ret; -+ int len; - -- if (!of_find_property(dev->of_node, "dmas", NULL)) { -+ if (!of_find_property(dev->of_node, "dmas", &len) || -+ len == 0) { - dev_warn(dev, -- "'dmas' DT property is missing, no HDMI audio\n"); -+ "'dmas' DT property is missing or empty, no HDMI audio\n"); - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0724-drm-vc4-Fix-for-margins-in-composite-SDTV-mode-3223.patch b/target/linux/brcm2708/patches-4.19/950-0724-drm-vc4-Fix-for-margins-in-composite-SDTV-mode-3223.patch new file mode 100644 index 0000000000..203804df6f --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0724-drm-vc4-Fix-for-margins-in-composite-SDTV-mode-3223.patch @@ -0,0 +1,34 @@ +From 1e37bc9f0ea83fa4b3f1714b4382edb7b256a251 Mon Sep 17 00:00:00 2001 +From: James Hughes +Date: Wed, 11 Sep 2019 14:57:18 +0100 +Subject: [PATCH] drm/vc4: Fix for margins in composite/SDTV mode + (#3223) + +Margins were incorrectly assumed to be setup in SDTV mode, but were +not actually done, so this make the setup non-conditional on mode. + +Signed-off-by: James Hughes +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -1588,14 +1588,9 @@ vc4_fkms_connector_init(struct drm_devic + connector->interlace_allowed = 0; + } + +- /* Create and attach TV margin props to this connector. +- * Already done for SDTV outputs. +- */ +- if (fkms_connector->display_type != DRM_MODE_ENCODER_TVDAC) { +- ret = drm_mode_create_tv_margin_properties(dev); +- if (ret) +- goto fail; +- } ++ ret = drm_mode_create_tv_margin_properties(dev); ++ if (ret) ++ goto fail; + + drm_connector_attach_tv_margin_properties(connector); + diff --git a/target/linux/brcm2708/patches-4.19/950-0724-overlays-Add-audio-parameter-to-vc4-kms-v3d.patch b/target/linux/brcm2708/patches-4.19/950-0724-overlays-Add-audio-parameter-to-vc4-kms-v3d.patch deleted file mode 100644 index 5394faa1cc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0724-overlays-Add-audio-parameter-to-vc4-kms-v3d.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 418ca5973ad807f9d7f99e68af2bd21c7e8baa4d Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 31 Jul 2019 17:39:37 +0100 -Subject: [PATCH 724/806] overlays: Add audio parameter to vc4-kms-v3d - -The audio parameter to the vc4-kms-v3d overlay allows audio support -to be disabled (it defaults to on) by adding "audio=off" to the -dtoverlay parameters. - -See: https://github.com/raspberrypi/linux/issues/2489 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 1 + - arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 8 ++++++++ - 2 files changed, 9 insertions(+) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -2480,6 +2480,7 @@ Params: cma-256 CMA is 2 - cma-128 CMA is 128MB - cma-96 CMA is 96MB - cma-64 CMA is 64MB -+ audio Enable or disable audio over HDMI (default "on") - - - Name: vga666 ---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -@@ -134,11 +134,19 @@ - }; - }; - -+ fragment@17 { -+ target = <&hdmi>; -+ __dormant__ { -+ dmas; -+ }; -+ }; -+ - __overrides__ { - cma-256 = <0>,"+0-1-2-3-4"; - cma-192 = <0>,"-0+1-2-3-4"; - cma-128 = <0>,"-0-1+2-3-4"; - cma-96 = <0>,"-0-1-2+3-4"; - cma-64 = <0>,"-0-1-2-3+4"; -+ audio = <0>,"!17"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0725-Add-Hifiberry-DAC-DSP-soundcard-driver-3224.patch b/target/linux/brcm2708/patches-4.19/950-0725-Add-Hifiberry-DAC-DSP-soundcard-driver-3224.patch new file mode 100644 index 0000000000..0ff97759d9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0725-Add-Hifiberry-DAC-DSP-soundcard-driver-3224.patch @@ -0,0 +1,246 @@ +From f0715f5e178f2f7c0afb719a3a35c8ac250b7586 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?J=C3=B6rg=20Schambacher?= + +Date: Thu, 12 Sep 2019 14:57:32 +0200 +Subject: [PATCH] Add Hifiberry DAC+DSP soundcard driver (#3224) + +Adds the driver for the Hifiberry DAC+DSP. It supports capture and +playback depending on the DSP firmware. + +Signed-off-by: Joerg Schambacher +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 ++ + .../overlays/hifiberry-dacplusdsp-overlay.dts | 34 +++++++ + sound/soc/bcm/Kconfig | 7 ++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/hifiberry_dacplusdsp.c | 90 +++++++++++++++++++ + sound/soc/bcm/rpi-simple-soundcard.c | 19 ++++ + 10 files changed, 162 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts + create mode 100644 sound/soc/bcm/hifiberry_dacplusdsp.c + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -54,6 +54,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + hifiberry-dacplus.dtbo \ + hifiberry-dacplusadc.dtbo \ + hifiberry-dacplusadcpro.dtbo \ ++ hifiberry-dacplusdsp.dtbo \ + hifiberry-digi.dtbo \ + hifiberry-digi-pro.dtbo \ + hy28a.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -904,6 +904,12 @@ Params: 24db_digital_gain Allow ga + master for bit clock and frame clock. + + ++Name: hifiberry-dacplusdsp ++Info: Configures the HifiBerry DAC+DSP audio card ++Load: dtoverlay=hifiberry-dacplusdsp ++Params: ++ ++ + Name: hifiberry-digi + Info: Configures the HifiBerry Digi and Digi+ audio card + Load: dtoverlay=hifiberry-digi +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for hifiberry DAC+DSP soundcard overlay ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ dacplusdsp-codec { ++ #sound-dai-cells = <0>; ++ compatible = "hifiberry,dacplusdsp"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberrydacplusdsp,hifiberrydacplusdsp-soundcard"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -56,6 +56,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DACPLUS + help + Say Y or M if you want to add support for HifiBerry DAC+ADC PRO. + ++config SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP ++ tristate "Support for HifiBerry DAC+DSP" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_RPI_SIMPLE_SOUNDCARD ++ help ++ Say Y or M if you want to add support for HifiBerry DSP-DAC. ++ + config SND_BCM2708_SOC_HIFIBERRY_DIGI + tristate "Support for HifiBerry Digi" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -15,6 +15,7 @@ snd-soc-googlevoicehat-codec-objs := goo + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o + snd-soc-hifiberry-dacplusadcpro-objs := hifiberry_dacplusadcpro.o ++snd-soc-hifiberry-dacplusdsp-objs := hifiberry_dacplusdsp.o + snd-soc-justboom-dac-objs := justboom-dac.o + snd-soc-rpi-cirrus-objs := rpi-cirrus.o + snd-soc-rpi-proto-objs := rpi-proto.o +@@ -40,6 +41,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICE + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO) += snd-soc-hifiberry-dacplusadcpro.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP) += snd-soc-hifiberry-dacplusdsp.o + obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_dacplusdsp.c +@@ -0,0 +1,90 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * ASoC Driver for HiFiBerry DAC + DSP ++ * ++ * Author: Joerg Schambacher ++ * Copyright 2018 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++static struct snd_soc_component_driver dacplusdsp_component_driver; ++ ++static struct snd_soc_dai_driver dacplusdsp_dai = { ++ .name = "dacplusdsp-hifi", ++ .capture = { ++ .stream_name = "DAC+DSP Capture", ++ .channels_min = 2, ++ .channels_max = 2, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE | ++ SNDRV_PCM_FMTBIT_S24_LE | ++ SNDRV_PCM_FMTBIT_S32_LE, ++ }, ++ .playback = { ++ .stream_name = "DACP+DSP Playback", ++ .channels_min = 2, ++ .channels_max = 2, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE | ++ SNDRV_PCM_FMTBIT_S24_LE | ++ SNDRV_PCM_FMTBIT_S32_LE, ++ }, ++ .symmetric_rates = 1}; ++ ++#ifdef CONFIG_OF ++static const struct of_device_id dacplusdsp_ids[] = { ++ { ++ .compatible = "hifiberry,dacplusdsp", ++ }, ++ {} }; ++MODULE_DEVICE_TABLE(of, dacplusdsp_ids); ++#endif ++ ++static int dacplusdsp_platform_probe(struct platform_device *pdev) ++{ ++ int ret; ++ ++ ret = snd_soc_register_component(&pdev->dev, ++ &dacplusdsp_component_driver, &dacplusdsp_dai, 1); ++ if (ret) { ++ pr_alert("snd_soc_register_component failed\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int dacplusdsp_platform_remove(struct platform_device *pdev) ++{ ++ snd_soc_unregister_component(&pdev->dev); ++ return 0; ++} ++ ++static struct platform_driver dacplusdsp_driver = { ++ .driver = { ++ .name = "hifiberry-dacplusdsp-codec", ++ .of_match_table = of_match_ptr(dacplusdsp_ids), ++ }, ++ .probe = dacplusdsp_platform_probe, ++ .remove = dacplusdsp_platform_remove, ++}; ++ ++module_platform_driver(dacplusdsp_driver); ++ ++MODULE_AUTHOR("Joerg Schambacher "); ++MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+DSP"); ++MODULE_LICENSE("GPL v2"); +--- a/sound/soc/bcm/rpi-simple-soundcard.c ++++ b/sound/soc/bcm/rpi-simple-soundcard.c +@@ -136,6 +136,23 @@ static struct snd_rpi_simple_drvdata drv + .dai = snd_googlevoicehat_soundcard_dai, + }; + ++static struct snd_soc_dai_link snd_hifiberrydacplusdsp_soundcard_dai[] = { ++{ ++ .name = "Hifiberry DAC+DSP SoundCard", ++ .stream_name = "Hifiberry DAC+DSP SoundCard HiFi", ++ .codec_dai_name = "dacplusdsp-hifi", ++ .codec_name = "dacplusdsp-codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++}, ++}; ++ ++static struct snd_rpi_simple_drvdata drvdata_hifiberrydacplusdsp = { ++ .card_name = "snd_rpi_hifiberrydacplusdsp_soundcard", ++ .dai = snd_hifiberrydacplusdsp_soundcard_dai, ++}; ++ + static struct snd_soc_dai_link snd_hifiberry_amp_dai[] = { + { + .name = "HifiBerry AMP", +@@ -193,6 +210,8 @@ static const struct of_device_id snd_rpi + .data = (void *) &drvdata_adau1977 }, + { .compatible = "googlevoicehat,googlevoicehat-soundcard", + .data = (void *) &drvdata_googlevoicehat }, ++ { .compatible = "hifiberrydacplusdsp,hifiberrydacplusdsp-soundcard", ++ .data = (void *) &drvdata_hifiberrydacplusdsp }, + { .compatible = "hifiberry,hifiberry-amp", + .data = (void *) &drvdata_hifiberry_amp }, + { .compatible = "hifiberry,hifiberry-dac", diff --git a/target/linux/brcm2708/patches-4.19/950-0725-overlays-Update-the-upstream-overlay.patch b/target/linux/brcm2708/patches-4.19/950-0725-overlays-Update-the-upstream-overlay.patch deleted file mode 100644 index 7bd6f9cfc1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0725-overlays-Update-the-upstream-overlay.patch +++ /dev/null @@ -1,28 +0,0 @@ -From a14162d8da62fb570df916d7386febe51d6ed2bc Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 31 Jul 2019 17:41:47 +0100 -Subject: [PATCH 725/806] overlays: Update the upstream overlay - -The recent vc4-kms-v3d commit has changed the content of the -upstream overlay (even though the extra fragment is disabled). - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/upstream-overlay.dts | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/arch/arm/boot/dts/overlays/upstream-overlay.dts -+++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts -@@ -110,6 +110,12 @@ - }; - }; - fragment@17 { -+ target = <&hdmi>; -+ __dormant__ { -+ dmas; -+ }; -+ }; -+ fragment@18 { - target = <&usb>; - #address-cells = <1>; - #size-cells = <1>; diff --git a/target/linux/brcm2708/patches-4.19/950-0726-staging-bcm2835-codec-Allow-height-of-1920.patch b/target/linux/brcm2708/patches-4.19/950-0726-staging-bcm2835-codec-Allow-height-of-1920.patch new file mode 100644 index 0000000000..3004f89c9a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0726-staging-bcm2835-codec-Allow-height-of-1920.patch @@ -0,0 +1,27 @@ +From b25d17959484972a6585d6e1f7cb2cfb93d1540e Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 6 Sep 2019 17:24:55 +0100 +Subject: [PATCH] staging: bcm2835-codec: Allow height of 1920. + +The codec is happy with video up to 1920 high if the width +is suitably reduced to stay within level limits. eg 1080x1920 +is OK to decode. + +Increase the height limit accordingly. + +Signed-off-by: Dave Stevenson +--- + .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -92,7 +92,7 @@ static const char * const components[] = + #define MIN_W 32 + #define MIN_H 32 + #define MAX_W 1920 +-#define MAX_H 1088 ++#define MAX_H 1920 + #define BPL_ALIGN 32 + #define DEFAULT_WIDTH 640 + #define DEFAULT_HEIGHT 480 diff --git a/target/linux/brcm2708/patches-4.19/950-0727-Fixup-FKMS-interrupt-handing-for-non-existent-displa.patch b/target/linux/brcm2708/patches-4.19/950-0727-Fixup-FKMS-interrupt-handing-for-non-existent-displa.patch deleted file mode 100644 index cf29f5b4dc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0727-Fixup-FKMS-interrupt-handing-for-non-existent-displa.patch +++ /dev/null @@ -1,39 +0,0 @@ -From c2957d7709a43c81e5345d537feaa6980ffcc1a4 Mon Sep 17 00:00:00 2001 -From: James Hughes -Date: Mon, 29 Jul 2019 12:02:59 +0100 -Subject: [PATCH 727/806] Fixup FKMS interrupt handing for non-existent display - -If an errant interrupt flag was received from a non-existent display, -a NULL pointer access was made. Protect against this by checking if a -second display is present prior to checking the interrupt flags. ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 17 ++++++++++------- - 1 file changed, 10 insertions(+), 7 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -1056,14 +1056,17 @@ static irqreturn_t vc4_crtc_irq_handler( - vc4_crtc_handle_page_flip(crtc_list[0]); - } - -- /* Check for the secondary display too */ -- chan = readl(crtc_list[0]->regs + SMIDSW1); -+ if (crtc_list[1]) { -+ /* Check for the secondary display too */ -+ chan = readl(crtc_list[0]->regs + SMIDSW1); - -- if (chan & 1) { -- writel(SMI_NEW, crtc_list[0]->regs + SMIDSW1); -- if (crtc_list[1]->vblank_enabled) -- drm_crtc_handle_vblank(&crtc_list[1]->base); -- vc4_crtc_handle_page_flip(crtc_list[1]); -+ if (chan & 1) { -+ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW1); -+ -+ if (crtc_list[1]->vblank_enabled) -+ drm_crtc_handle_vblank(&crtc_list[1]->base); -+ vc4_crtc_handle_page_flip(crtc_list[1]); -+ } - } - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0727-staging-bcm2835-codec-Correct-g-s_selection-API-MPLA.patch b/target/linux/brcm2708/patches-4.19/950-0727-staging-bcm2835-codec-Correct-g-s_selection-API-MPLA.patch new file mode 100644 index 0000000000..36c5d1c23a --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0727-staging-bcm2835-codec-Correct-g-s_selection-API-MPLA.patch @@ -0,0 +1,107 @@ +From 956fd55c1071c48f00285d82507698c501633e7a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 13 Sep 2019 15:11:47 +0100 +Subject: [PATCH] staging: bcm2835-codec: Correct g/s_selection API + MPLANE support + +The g_selection and s_selection API is messed up and requires +the driver to expect the non-MPLANE buffer types, not the MPLANE +ones even if they are supported. The V4L2 core will convert the +MPLANE ones to non-MPLANE should they be passed in + +Fixes: 5e484a3 staging: bcm2835-codec: switch to multi-planar API +Signed-off-by: Dave Stevenson +--- + .../bcm2835-codec/bcm2835-v4l2-codec.c | 67 +++++++++++++------ + 1 file changed, 47 insertions(+), 20 deletions(-) + +--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c ++++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c +@@ -1260,17 +1260,30 @@ static int vidioc_g_selection(struct fil + { + struct bcm2835_codec_ctx *ctx = file2ctx(file); + struct bcm2835_codec_q_data *q_data; +- bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ? +- true : false; + +- if ((ctx->dev->role == DECODE && !capture_queue) || +- (ctx->dev->role == ENCODE && capture_queue)) +- /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ +- return -EINVAL; +- +- q_data = get_q_data(ctx, s->type); +- if (!q_data) ++ /* ++ * The selection API takes V4L2_BUF_TYPE_VIDEO_CAPTURE and ++ * V4L2_BUF_TYPE_VIDEO_OUTPUT, even if the device implements the MPLANE ++ * API. The V4L2 core will have converted the MPLANE variants to ++ * non-MPLANE. ++ * Open code this instead of using get_q_data in this case. ++ */ ++ switch (s->type) { ++ case V4L2_BUF_TYPE_VIDEO_CAPTURE: ++ /* CAPTURE on encoder is not valid. */ ++ if (ctx->dev->role == ENCODE) ++ return -EINVAL; ++ q_data = &ctx->q_data[V4L2_M2M_DST]; ++ break; ++ case V4L2_BUF_TYPE_VIDEO_OUTPUT: ++ /* OUTPUT on deoder is not valid. */ ++ if (ctx->dev->role == DECODE) ++ return -EINVAL; ++ q_data = &ctx->q_data[V4L2_M2M_SRC]; ++ break; ++ default: + return -EINVAL; ++ } + + switch (ctx->dev->role) { + case DECODE: +@@ -1323,22 +1336,36 @@ static int vidioc_s_selection(struct fil + { + struct bcm2835_codec_ctx *ctx = file2ctx(file); + struct bcm2835_codec_q_data *q_data = NULL; +- bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ? +- true : false; ++ ++ /* ++ * The selection API takes V4L2_BUF_TYPE_VIDEO_CAPTURE and ++ * V4L2_BUF_TYPE_VIDEO_OUTPUT, even if the device implements the MPLANE ++ * API. The V4L2 core will have converted the MPLANE variants to ++ * non-MPLANE. ++ * ++ * Open code this instead of using get_q_data in this case. ++ */ ++ switch (s->type) { ++ case V4L2_BUF_TYPE_VIDEO_CAPTURE: ++ /* CAPTURE on encoder is not valid. */ ++ if (ctx->dev->role == ENCODE) ++ return -EINVAL; ++ q_data = &ctx->q_data[V4L2_M2M_DST]; ++ break; ++ case V4L2_BUF_TYPE_VIDEO_OUTPUT: ++ /* OUTPUT on deoder is not valid. */ ++ if (ctx->dev->role == DECODE) ++ return -EINVAL; ++ q_data = &ctx->q_data[V4L2_M2M_SRC]; ++ break; ++ default: ++ return -EINVAL; ++ } + + v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: ctx %p, type %d, q_data %p, target %d, rect x/y %d/%d, w/h %ux%u\n", + __func__, ctx, s->type, q_data, s->target, s->r.left, s->r.top, + s->r.width, s->r.height); + +- if ((ctx->dev->role == DECODE && !capture_queue) || +- (ctx->dev->role == ENCODE && capture_queue)) +- /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ +- return -EINVAL; +- +- q_data = get_q_data(ctx, s->type); +- if (!q_data) +- return -EINVAL; +- + switch (ctx->dev->role) { + case DECODE: + switch (s->target) { diff --git a/target/linux/brcm2708/patches-4.19/950-0728-drivers-char-Use-correct-name-for-the-Raspberry-Pi-v.patch b/target/linux/brcm2708/patches-4.19/950-0728-drivers-char-Use-correct-name-for-the-Raspberry-Pi-v.patch deleted file mode 100644 index 1436038cf8..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0728-drivers-char-Use-correct-name-for-the-Raspberry-Pi-v.patch +++ /dev/null @@ -1,689 +0,0 @@ -From 6c8c9ca56ce6039ade09d26c069132538e4de9f0 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Sun, 28 Jul 2019 22:22:36 +0100 -Subject: [PATCH 728/806] drivers: char: Use correct name for the Raspberry Pi - video decoder - -Replace the old code name with a more appropriate name - RPiVid. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2838.dtsi | 10 +- - drivers/char/broadcom/Kconfig | 8 +- - drivers/char/broadcom/Makefile | 2 +- - .../broadcom/{argon-mem.c => rpivid-mem.c} | 105 +++++++++--------- - drivers/mfd/bcm2835-pm.c | 12 +- - drivers/soc/bcm/bcm2835-power.c | 6 +- - include/linux/mfd/bcm2835-pm.h | 2 +- - 8 files changed, 71 insertions(+), 76 deletions(-) - rename drivers/char/broadcom/{argon-mem.c => rpivid-mem.c} (69%) - ---- a/arch/arm/boot/dts/bcm2838.dtsi -+++ b/arch/arm/boot/dts/bcm2838.dtsi -@@ -409,26 +409,26 @@ - }; - - hevc-decoder@7eb00000 { -- compatible = "raspberrypi,argon-hevc-decoder"; -+ compatible = "raspberrypi,rpivid-hevc-decoder"; - reg = <0x0 0x7eb00000 0x10000>; - status = "okay"; - }; - -- argon-local-intc@7eb10000 { -- compatible = "raspberrypi,argon-local-intc"; -+ rpivid-local-intc@7eb10000 { -+ compatible = "raspberrypi,rpivid-local-intc"; - reg = <0x0 0x7eb10000 0x1000>; - status = "okay"; - interrupts = ; - }; - - h264-decoder@7eb20000 { -- compatible = "raspberrypi,argon-h264-decoder"; -+ compatible = "raspberrypi,rpivid-h264-decoder"; - reg = <0x0 0x7eb20000 0x10000>; - status = "okay"; - }; - - vp9-decoder@7eb30000 { -- compatible = "raspberrypi,argon-vp9-decoder"; -+ compatible = "raspberrypi,rpivid-vp9-decoder"; - reg = <0x0 0x7eb30000 0x10000>; - status = "okay"; - }; ---- a/drivers/char/broadcom/Kconfig -+++ b/drivers/char/broadcom/Kconfig -@@ -50,10 +50,10 @@ config BCM2835_SMI_DEV - Broadcom's Secondary Memory interface. The low-level functionality is provided - by the SMI driver itself. - --config ARGON_MEM -- tristate "Character device driver for the Argon decoder hardware" -+config RPIVID_MEM -+ tristate "Character device driver for the Raspberry Pi RPIVid video decoder hardware" - default n - help - This driver provides a character device interface for memory-map operations -- so userspace tools can access the control and status registers of the Argon -- video decoder hardware. -+ so userspace tools can access the control and status registers of the -+ Raspberry Pi RPiVid video decoder hardware. ---- a/drivers/char/broadcom/Makefile -+++ b/drivers/char/broadcom/Makefile -@@ -4,4 +4,4 @@ obj-$(CONFIG_BCM_VC_SM) += vc_sm - - obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o - obj-$(CONFIG_BCM2835_SMI_DEV) += bcm2835_smi_dev.o --obj-$(CONFIG_ARGON_MEM) += argon-mem.o -+obj-$(CONFIG_RPIVID_MEM) += rpivid-mem.o ---- a/drivers/char/broadcom/argon-mem.c -+++ /dev/null -@@ -1,277 +0,0 @@ --/** -- * argon-mem.c - character device access to the Argon decoder registers -- * -- * Based on bcm2835-gpiomem.c. Provides IO memory access to the decoder -- * register blocks such that ffmpeg plugins can access the hardware. -- * -- * Jonathan Bell -- * Copyright (c) 2019, Raspberry Pi (Trading) Ltd. -- * -- * Redistribution and use in source and binary forms, with or without -- * modification, are permitted provided that the following conditions -- * are met: -- * 1. Redistributions of source code must retain the above copyright -- * notice, this list of conditions, and the following disclaimer, -- * without modification. -- * 2. Redistributions in binary form must reproduce the above copyright -- * notice, this list of conditions and the following disclaimer in the -- * documentation and/or other materials provided with the distribution. -- * 3. The names of the above-listed copyright holders may not be used -- * to endorse or promote products derived from this software without -- * specific prior written permission. -- * -- * ALTERNATIVELY, this software may be distributed under the terms of the -- * GNU General Public License ("GPL") version 2, as published by the Free -- * Software Foundation. -- * -- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -- */ -- --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include -- --#define DRIVER_NAME "argon-mem" --#define DEVICE_MINOR 0 -- --struct argon_mem_priv { -- dev_t devid; -- struct class *class; -- struct cdev argon_mem_cdev; -- unsigned long regs_phys; -- unsigned long mem_window_len; -- struct device *dev; -- const char *name; --}; -- --static int argon_mem_open(struct inode *inode, struct file *file) --{ -- int dev = iminor(inode); -- int ret = 0; -- struct argon_mem_priv *priv; -- if (dev != DEVICE_MINOR) -- ret = -ENXIO; -- -- priv = container_of(inode->i_cdev, struct argon_mem_priv, -- argon_mem_cdev); -- if (!priv) -- return -EINVAL; -- file->private_data = priv; -- return ret; --} -- --static int argon_mem_release(struct inode *inode, struct file *file) --{ -- int dev = iminor(inode); -- int ret = 0; -- -- if (dev != DEVICE_MINOR) -- ret = -ENXIO; -- -- return ret; --} -- --static const struct vm_operations_struct argon_mem_vm_ops = { --#ifdef CONFIG_HAVE_IOREMAP_PROT -- .access = generic_access_phys --#endif --}; -- --static int argon_mem_mmap(struct file *file, struct vm_area_struct *vma) --{ -- struct argon_mem_priv *priv; -- unsigned long pages; -- -- priv = file->private_data; -- pages = priv->regs_phys >> PAGE_SHIFT; -- /* -- * The address decode is far larger than the actual number of registers. -- * Just map the whole lot in. -- */ -- vma->vm_page_prot = phys_mem_access_prot(file, pages, -- priv->mem_window_len, -- vma->vm_page_prot); -- vma->vm_ops = &argon_mem_vm_ops; -- if (remap_pfn_range(vma, vma->vm_start, -- pages, -- priv->mem_window_len, -- vma->vm_page_prot)) { -- return -EAGAIN; -- } -- return 0; --} -- --static const struct file_operations --argon_mem_fops = { -- .owner = THIS_MODULE, -- .open = argon_mem_open, -- .release = argon_mem_release, -- .mmap = argon_mem_mmap, --}; -- --static const struct of_device_id argon_mem_of_match[]; --static int argon_mem_probe(struct platform_device *pdev) --{ -- int err; -- void *ptr_err; -- const struct of_device_id *id; -- struct device *dev = &pdev->dev; -- struct device *argon_mem_dev; -- struct resource *ioresource; -- struct argon_mem_priv *priv; -- -- -- /* Allocate buffers and instance data */ -- -- priv = kzalloc(sizeof(struct argon_mem_priv), GFP_KERNEL); -- -- if (!priv) { -- err = -ENOMEM; -- goto failed_inst_alloc; -- } -- platform_set_drvdata(pdev, priv); -- -- priv->dev = dev; -- id = of_match_device(argon_mem_of_match, dev); -- if (!id) -- return -EINVAL; -- priv->name = id->data; -- -- ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- if (ioresource) { -- priv->regs_phys = ioresource->start; -- priv->mem_window_len = ioresource->end - ioresource->start; -- } else { -- dev_err(priv->dev, "failed to get IO resource"); -- err = -ENOENT; -- goto failed_get_resource; -- } -- -- /* Create character device entries */ -- -- err = alloc_chrdev_region(&priv->devid, -- DEVICE_MINOR, 1, priv->name); -- if (err != 0) { -- dev_err(priv->dev, "unable to allocate device number"); -- goto failed_alloc_chrdev; -- } -- cdev_init(&priv->argon_mem_cdev, &argon_mem_fops); -- priv->argon_mem_cdev.owner = THIS_MODULE; -- err = cdev_add(&priv->argon_mem_cdev, priv->devid, 1); -- if (err != 0) { -- dev_err(priv->dev, "unable to register device"); -- goto failed_cdev_add; -- } -- -- /* Create sysfs entries */ -- -- priv->class = class_create(THIS_MODULE, priv->name); -- ptr_err = priv->class; -- if (IS_ERR(ptr_err)) -- goto failed_class_create; -- -- argon_mem_dev = device_create(priv->class, NULL, -- priv->devid, NULL, -- priv->name); -- ptr_err = argon_mem_dev; -- if (IS_ERR(ptr_err)) -- goto failed_device_create; -- -- dev_info(priv->dev, "%s initialised: Registers at 0x%08lx length 0x%08lx", -- priv->name, priv->regs_phys, priv->mem_window_len); -- -- return 0; -- --failed_device_create: -- class_destroy(priv->class); --failed_class_create: -- cdev_del(&priv->argon_mem_cdev); -- err = PTR_ERR(ptr_err); --failed_cdev_add: -- unregister_chrdev_region(priv->devid, 1); --failed_alloc_chrdev: --failed_get_resource: -- kfree(priv); --failed_inst_alloc: -- dev_err(priv->dev, "could not load argon_mem"); -- return err; --} -- --static int argon_mem_remove(struct platform_device *pdev) --{ -- struct device *dev = &pdev->dev; -- struct argon_mem_priv *priv = platform_get_drvdata(pdev); -- -- device_destroy(priv->class, priv->devid); -- class_destroy(priv->class); -- cdev_del(&priv->argon_mem_cdev); -- unregister_chrdev_region(priv->devid, 1); -- kfree(priv); -- -- dev_info(dev, "%s driver removed - OK", priv->name); -- return 0; --} -- --static const char argon_hevc_name[] = "argon-hevcmem"; --static const char argon_h264_name[] = "argon-h264mem"; --static const char argon_vp9_name[] = "argon-vp9mem"; --static const char argon_intc_name[] = "argon-intcmem"; -- --static const struct of_device_id argon_mem_of_match[] = { -- { -- .compatible = "raspberrypi,argon-hevc-decoder", -- .data = &argon_hevc_name, -- }, -- { -- .compatible = "raspberrypi,argon-h264-decoder", -- .data = &argon_h264_name, -- }, -- { -- .compatible = "raspberrypi,argon-vp9-decoder", -- .data = &argon_vp9_name, -- }, -- /* The "intc" is included as this block of hardware contains the -- * "frame done" status flags. -- */ -- { -- .compatible = "raspberrypi,argon-local-intc", -- .data = &argon_intc_name, -- }, -- { /* sentinel */ }, --}; -- --MODULE_DEVICE_TABLE(of, argon_mem_of_match); -- --static struct platform_driver argon_mem_driver = { -- .probe = argon_mem_probe, -- .remove = argon_mem_remove, -- .driver = { -- .name = DRIVER_NAME, -- .owner = THIS_MODULE, -- .of_match_table = argon_mem_of_match, -- }, --}; -- --module_platform_driver(argon_mem_driver); -- --MODULE_ALIAS("platform:argon-mem"); --MODULE_LICENSE("GPL"); --MODULE_DESCRIPTION("Driver for accessing Argon decoder registers from userspace"); --MODULE_AUTHOR("Jonathan Bell "); ---- /dev/null -+++ b/drivers/char/broadcom/rpivid-mem.c -@@ -0,0 +1,272 @@ -+/** -+ * rpivid-mem.c - character device access to the RPiVid decoder registers -+ * -+ * Based on bcm2835-gpiomem.c. Provides IO memory access to the decoder -+ * register blocks such that ffmpeg plugins can access the hardware. -+ * -+ * Jonathan Bell -+ * Copyright (c) 2019, Raspberry Pi (Trading) Ltd. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2, as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRIVER_NAME "rpivid-mem" -+#define DEVICE_MINOR 0 -+ -+struct rpivid_mem_priv { -+ dev_t devid; -+ struct class *class; -+ struct cdev rpivid_mem_cdev; -+ unsigned long regs_phys; -+ unsigned long mem_window_len; -+ struct device *dev; -+ const char *name; -+}; -+ -+static int rpivid_mem_open(struct inode *inode, struct file *file) -+{ -+ int dev = iminor(inode); -+ int ret = 0; -+ struct rpivid_mem_priv *priv; -+ if (dev != DEVICE_MINOR) -+ ret = -ENXIO; -+ -+ priv = container_of(inode->i_cdev, struct rpivid_mem_priv, -+ rpivid_mem_cdev); -+ if (!priv) -+ return -EINVAL; -+ file->private_data = priv; -+ return ret; -+} -+ -+static int rpivid_mem_release(struct inode *inode, struct file *file) -+{ -+ int dev = iminor(inode); -+ int ret = 0; -+ -+ if (dev != DEVICE_MINOR) -+ ret = -ENXIO; -+ -+ return ret; -+} -+ -+static const struct vm_operations_struct rpivid_mem_vm_ops = { -+#ifdef CONFIG_HAVE_IOREMAP_PROT -+ .access = generic_access_phys -+#endif -+}; -+ -+static int rpivid_mem_mmap(struct file *file, struct vm_area_struct *vma) -+{ -+ struct rpivid_mem_priv *priv; -+ unsigned long pages; -+ -+ priv = file->private_data; -+ pages = priv->regs_phys >> PAGE_SHIFT; -+ /* -+ * The address decode is far larger than the actual number of registers. -+ * Just map the whole lot in. -+ */ -+ vma->vm_page_prot = phys_mem_access_prot(file, pages, -+ priv->mem_window_len, -+ vma->vm_page_prot); -+ vma->vm_ops = &rpivid_mem_vm_ops; -+ if (remap_pfn_range(vma, vma->vm_start, -+ pages, -+ priv->mem_window_len, -+ vma->vm_page_prot)) { -+ return -EAGAIN; -+ } -+ return 0; -+} -+ -+static const struct file_operations -+rpivid_mem_fops = { -+ .owner = THIS_MODULE, -+ .open = rpivid_mem_open, -+ .release = rpivid_mem_release, -+ .mmap = rpivid_mem_mmap, -+}; -+ -+static const struct of_device_id rpivid_mem_of_match[]; -+static int rpivid_mem_probe(struct platform_device *pdev) -+{ -+ int err; -+ void *ptr_err; -+ const struct of_device_id *id; -+ struct device *dev = &pdev->dev; -+ struct device *rpivid_mem_dev; -+ struct resource *ioresource; -+ struct rpivid_mem_priv *priv; -+ -+ -+ /* Allocate buffers and instance data */ -+ -+ priv = kzalloc(sizeof(struct rpivid_mem_priv), GFP_KERNEL); -+ -+ if (!priv) { -+ err = -ENOMEM; -+ goto failed_inst_alloc; -+ } -+ platform_set_drvdata(pdev, priv); -+ -+ priv->dev = dev; -+ id = of_match_device(rpivid_mem_of_match, dev); -+ if (!id) -+ return -EINVAL; -+ priv->name = id->data; -+ -+ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (ioresource) { -+ priv->regs_phys = ioresource->start; -+ priv->mem_window_len = ioresource->end - ioresource->start; -+ } else { -+ dev_err(priv->dev, "failed to get IO resource"); -+ err = -ENOENT; -+ goto failed_get_resource; -+ } -+ -+ /* Create character device entries */ -+ -+ err = alloc_chrdev_region(&priv->devid, -+ DEVICE_MINOR, 1, priv->name); -+ if (err != 0) { -+ dev_err(priv->dev, "unable to allocate device number"); -+ goto failed_alloc_chrdev; -+ } -+ cdev_init(&priv->rpivid_mem_cdev, &rpivid_mem_fops); -+ priv->rpivid_mem_cdev.owner = THIS_MODULE; -+ err = cdev_add(&priv->rpivid_mem_cdev, priv->devid, 1); -+ if (err != 0) { -+ dev_err(priv->dev, "unable to register device"); -+ goto failed_cdev_add; -+ } -+ -+ /* Create sysfs entries */ -+ -+ priv->class = class_create(THIS_MODULE, priv->name); -+ ptr_err = priv->class; -+ if (IS_ERR(ptr_err)) -+ goto failed_class_create; -+ -+ rpivid_mem_dev = device_create(priv->class, NULL, -+ priv->devid, NULL, -+ priv->name); -+ ptr_err = rpivid_mem_dev; -+ if (IS_ERR(ptr_err)) -+ goto failed_device_create; -+ -+ dev_info(priv->dev, "%s initialised: Registers at 0x%08lx length 0x%08lx", -+ priv->name, priv->regs_phys, priv->mem_window_len); -+ -+ return 0; -+ -+failed_device_create: -+ class_destroy(priv->class); -+failed_class_create: -+ cdev_del(&priv->rpivid_mem_cdev); -+ err = PTR_ERR(ptr_err); -+failed_cdev_add: -+ unregister_chrdev_region(priv->devid, 1); -+failed_alloc_chrdev: -+failed_get_resource: -+ kfree(priv); -+failed_inst_alloc: -+ dev_err(priv->dev, "could not load rpivid_mem"); -+ return err; -+} -+ -+static int rpivid_mem_remove(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct rpivid_mem_priv *priv = platform_get_drvdata(pdev); -+ -+ device_destroy(priv->class, priv->devid); -+ class_destroy(priv->class); -+ cdev_del(&priv->rpivid_mem_cdev); -+ unregister_chrdev_region(priv->devid, 1); -+ kfree(priv); -+ -+ dev_info(dev, "%s driver removed - OK", priv->name); -+ return 0; -+} -+ -+static const struct of_device_id rpivid_mem_of_match[] = { -+ { -+ .compatible = "raspberrypi,rpivid-hevc-decoder", -+ .data = "rpivid-hevcmem", -+ }, -+ { -+ .compatible = "raspberrypi,rpivid-h264-decoder", -+ .data = "rpivid-h264mem", -+ }, -+ { -+ .compatible = "raspberrypi,rpivid-vp9-decoder", -+ .data = "rpivid-vp9mem", -+ }, -+ /* The "intc" is included as this block of hardware contains the -+ * "frame done" status flags. -+ */ -+ { -+ .compatible = "raspberrypi,rpivid-local-intc", -+ .data = "rpivid-intcmem", -+ }, -+ { /* sentinel */ }, -+}; -+ -+MODULE_DEVICE_TABLE(of, rpivid_mem_of_match); -+ -+static struct platform_driver rpivid_mem_driver = { -+ .probe = rpivid_mem_probe, -+ .remove = rpivid_mem_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = rpivid_mem_of_match, -+ }, -+}; -+ -+module_platform_driver(rpivid_mem_driver); -+ -+MODULE_ALIAS("platform:rpivid-mem"); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Driver for accessing RPiVid decoder registers from userspace"); -+MODULE_AUTHOR("Jonathan Bell "); ---- a/drivers/mfd/bcm2835-pm.c -+++ b/drivers/mfd/bcm2835-pm.c -@@ -50,14 +50,14 @@ static int bcm2835_pm_probe(struct platf - if (ret) - return ret; - -- /* Map the ARGON ASB regs if present. */ -+ /* Map the RPiVid ASB regs if present. */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - if (res) { -- pm->arg_asb = devm_ioremap_resource(dev, res); -- if (IS_ERR(pm->arg_asb)) { -- dev_err(dev, "Failed to map ARGON ASB: %ld\n", -- PTR_ERR(pm->arg_asb)); -- return PTR_ERR(pm->arg_asb); -+ pm->rpivid_asb = devm_ioremap_resource(dev, res); -+ if (IS_ERR(pm->rpivid_asb)) { -+ dev_err(dev, "Failed to map RPiVid ASB: %ld\n", -+ PTR_ERR(pm->rpivid_asb)); -+ return PTR_ERR(pm->rpivid_asb); - } - } - ---- a/drivers/soc/bcm/bcm2835-power.c -+++ b/drivers/soc/bcm/bcm2835-power.c -@@ -637,15 +637,15 @@ static int bcm2835_power_probe(struct pl - power->base = pm->base; - power->asb = pm->asb; - -- /* 2711 hack: the new ARGON ASB took over V3D, which is our -+ /* 2711 hack: the new RPiVid ASB took over V3D, which is our - * only consumer of this driver so far. The old ASB seems to - * still be present with ISP and H264 bits but no V3D, but I - * don't know if that's real or not. The V3D is in the same - * place in the new ASB as the old one, so just poke the new - * one for now. - */ -- if (pm->arg_asb) { -- power->asb = pm->arg_asb; -+ if (pm->rpivid_asb) { -+ power->asb = pm->rpivid_asb; - power->is_2711 = true; - } - ---- a/include/linux/mfd/bcm2835-pm.h -+++ b/include/linux/mfd/bcm2835-pm.h -@@ -9,7 +9,7 @@ struct bcm2835_pm { - struct device *dev; - void __iomem *base; - void __iomem *asb; -- void __iomem *arg_asb; -+ void __iomem *rpivid_asb; - }; - - #endif /* BCM2835_MFD_PM_H */ diff --git a/target/linux/brcm2708/patches-4.19/950-0728-regulator-gpio-Allow-nonexclusive-GPIO-access.patch b/target/linux/brcm2708/patches-4.19/950-0728-regulator-gpio-Allow-nonexclusive-GPIO-access.patch new file mode 100644 index 0000000000..e0ffaae209 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0728-regulator-gpio-Allow-nonexclusive-GPIO-access.patch @@ -0,0 +1,79 @@ +From f6d983b7bc9ae79d0eb4dea7bc30a1ad5ff428a7 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Fri, 12 Oct 2018 14:54:12 +0200 +Subject: [PATCH] regulator/gpio: Allow nonexclusive GPIO access + +commit b0ce7b29bfcd090ddba476f45a75ec0a797b048a upstream. + +[ This is a partial cherry-pick, omitting the regulator +change which isn't required ] + +This allows nonexclusive (simultaneous) access to a single +GPIO line for the fixed regulator enable line. This happens +when several regulators use the same GPIO for enabling and +disabling a regulator, and all need a handle on their GPIO +descriptor. + +This solution with a special flag is not entirely elegant +and should ideally be replaced by something more careful as +this makes it possible for several consumers to +enable/disable the same GPIO line to the left and right +without any consistency. The current use inside the regulator +core should however be fine as it takes special care to +handle this. + +For the state of the GPIO backend, this is still the +lesser evil compared to going back to global GPIO +numbers. + +Cc: Marek Szyprowski +Cc: Jon Hunter +Fixes: efdfeb079cc3 ("regulator: fixed: Convert to use GPIO descriptor only") +Reported-by: Marek Szyprowski +Tested-by: Jon Hunter +Tested-by: Marek Szyprowski +Signed-off-by: Linus Walleij +Signed-off-by: Mark Brown +--- + drivers/gpio/gpiolib.c | 19 +++++++++++++++++-- + include/linux/gpio/consumer.h | 1 + + 2 files changed, 18 insertions(+), 2 deletions(-) + +--- a/drivers/gpio/gpiolib.c ++++ b/drivers/gpio/gpiolib.c +@@ -3979,8 +3979,23 @@ struct gpio_desc *__must_check gpiod_get + * the device name as label + */ + status = gpiod_request(desc, con_id ? con_id : devname); +- if (status < 0) +- return ERR_PTR(status); ++ if (status < 0) { ++ if (status == -EBUSY && flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE) { ++ /* ++ * This happens when there are several consumers for ++ * the same GPIO line: we just return here without ++ * further initialization. It is a bit if a hack. ++ * This is necessary to support fixed regulators. ++ * ++ * FIXME: Make this more sane and safe. ++ */ ++ dev_info(dev, "nonexclusive access to GPIO for %s\n", ++ con_id ? con_id : devname); ++ return desc; ++ } else { ++ return ERR_PTR(status); ++ } ++ } + + status = gpiod_configure_flags(desc, con_id, lookupflags, flags); + if (status < 0) { +--- a/include/linux/gpio/consumer.h ++++ b/include/linux/gpio/consumer.h +@@ -30,6 +30,7 @@ struct gpio_descs { + #define GPIOD_FLAGS_BIT_DIR_OUT BIT(1) + #define GPIOD_FLAGS_BIT_DIR_VAL BIT(2) + #define GPIOD_FLAGS_BIT_OPEN_DRAIN BIT(3) ++#define GPIOD_FLAGS_BIT_NONEXCLUSIVE BIT(4) + + /** + * Optional flags that can be passed to one of gpiod_* to configure direction diff --git a/target/linux/brcm2708/patches-4.19/950-0729-driver-char-rpivid-also-support-legacy-name.patch b/target/linux/brcm2708/patches-4.19/950-0729-driver-char-rpivid-also-support-legacy-name.patch deleted file mode 100644 index cffd29eda1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0729-driver-char-rpivid-also-support-legacy-name.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 80c20ff00542b050733780ae6088e50663ee8d78 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 29 Jul 2019 12:03:21 +0100 -Subject: [PATCH 729/806] driver: char: rpivid - also support legacy name - -Provide transitional support for the previous names of -the character devices. - -Signed-off-by: Phil Elwell ---- - drivers/char/broadcom/rpivid-mem.c | 22 ++++++++++++++++++---- - 1 file changed, 18 insertions(+), 4 deletions(-) - ---- a/drivers/char/broadcom/rpivid-mem.c -+++ b/drivers/char/broadcom/rpivid-mem.c -@@ -66,7 +66,7 @@ static int rpivid_mem_open(struct inode - int dev = iminor(inode); - int ret = 0; - struct rpivid_mem_priv *priv; -- if (dev != DEVICE_MINOR) -+ if (dev != DEVICE_MINOR && dev != DEVICE_MINOR + 1) - ret = -ENXIO; - - priv = container_of(inode->i_cdev, struct rpivid_mem_priv, -@@ -82,7 +82,7 @@ static int rpivid_mem_release(struct ino - int dev = iminor(inode); - int ret = 0; - -- if (dev != DEVICE_MINOR) -+ if (dev != DEVICE_MINOR && dev != DEVICE_MINOR + 1) - ret = -ENXIO; - - return ret; -@@ -167,14 +167,14 @@ static int rpivid_mem_probe(struct platf - /* Create character device entries */ - - err = alloc_chrdev_region(&priv->devid, -- DEVICE_MINOR, 1, priv->name); -+ DEVICE_MINOR, 2, priv->name); - if (err != 0) { - dev_err(priv->dev, "unable to allocate device number"); - goto failed_alloc_chrdev; - } - cdev_init(&priv->rpivid_mem_cdev, &rpivid_mem_fops); - priv->rpivid_mem_cdev.owner = THIS_MODULE; -- err = cdev_add(&priv->rpivid_mem_cdev, priv->devid, 1); -+ err = cdev_add(&priv->rpivid_mem_cdev, priv->devid, 2); - if (err != 0) { - dev_err(priv->dev, "unable to register device"); - goto failed_cdev_add; -@@ -194,6 +194,20 @@ static int rpivid_mem_probe(struct platf - if (IS_ERR(ptr_err)) - goto failed_device_create; - -+ /* Legacy alias */ -+ { -+ char *oldname = kstrdup(priv->name, GFP_KERNEL); -+ -+ oldname[1] = 'a'; -+ oldname[2] = 'r'; -+ oldname[3] = 'g'; -+ oldname[4] = 'o'; -+ oldname[5] = 'n'; -+ (void)device_create(priv->class, NULL, priv->devid + 1, NULL, -+ oldname + 1); -+ kfree(oldname); -+ } -+ - dev_info(priv->dev, "%s initialised: Registers at 0x%08lx length 0x%08lx", - priv->name, priv->regs_phys, priv->mem_window_len); - diff --git a/target/linux/brcm2708/patches-4.19/950-0729-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch b/target/linux/brcm2708/patches-4.19/950-0729-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch new file mode 100644 index 0000000000..e8e63a2798 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0729-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch @@ -0,0 +1,34 @@ +From 76870d237adff4c8e419064e7d4f5a8ef87c1085 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Thu, 6 Dec 2018 13:43:44 +0100 +Subject: [PATCH] gpio: Enable nonexclusive gpiods from DT nodes + +commit ec757001c818c175e6b610e8ef80c2a25d1ed1a5 upstream. + +This makes gpiod_get_from_of_node() respect the +GPIOD_FLAGS_BIT_NONEXCLUSIVE flag which is especially +nice when getting regulator GPIOs right out of device +tree nodes. + +Suggested-by: Marek Szyprowski +Fixes: b0ce7b29bfcd ("regulator/gpio: Allow nonexclusive GPIO access") +Signed-off-by: Linus Walleij +Reviewed-by: Marek Szyprowski +Tested-by: Marek Szyprowski +Reviewed-by: Charles Keepax +Signed-off-by: Mark Brown +--- + drivers/gpio/gpiolib.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/gpio/gpiolib.c ++++ b/drivers/gpio/gpiolib.c +@@ -4053,6 +4053,8 @@ struct gpio_desc *gpiod_get_from_of_node + transitory = flags & OF_GPIO_TRANSITORY; + + ret = gpiod_request(desc, label); ++ if (ret == -EBUSY && (flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE)) ++ return desc; + if (ret) + return ERR_PTR(ret); + diff --git a/target/linux/brcm2708/patches-4.19/950-0730-Fix-poll-rate-on-touchscreen-3238.patch b/target/linux/brcm2708/patches-4.19/950-0730-Fix-poll-rate-on-touchscreen-3238.patch new file mode 100644 index 0000000000..b47c8190fc --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0730-Fix-poll-rate-on-touchscreen-3238.patch @@ -0,0 +1,29 @@ +From a37a706547897d77b3194fc507b2546197def430 Mon Sep 17 00:00:00 2001 +From: James Hughes +Date: Tue, 17 Sep 2019 16:22:09 +0100 +Subject: [PATCH] Fix poll rate on touchscreen (#3238) + +Was running at 25Hz, rather than he expected 60. Only been doing it +for the last 5 years.... + +Replace msleep_interruptible with usleep_range as the msleep call +is not accurate for times < 20ms. + +Fixes: https://github.com/raspberrypi/linux/issues/3227 + +Signed-off-by: James Hughes +--- + drivers/input/touchscreen/rpi-ft5406.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/input/touchscreen/rpi-ft5406.c ++++ b/drivers/input/touchscreen/rpi-ft5406.c +@@ -78,7 +78,7 @@ static int ft5406_thread(void *arg) + + while (!kthread_should_stop()) { + /* 60fps polling */ +- msleep_interruptible(17); ++ usleep_range(16600, 16700); + memcpy_fromio(®s, ts->ts_base, sizeof(struct ft5406_regs)); + iowrite8(99, + ts->ts_base + diff --git a/target/linux/brcm2708/patches-4.19/950-0730-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch b/target/linux/brcm2708/patches-4.19/950-0730-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch deleted file mode 100644 index 051399fc04..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0730-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 16c1e20b50e121f836f434bb6c22c73e2f51d29f Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Thu, 1 Aug 2019 16:41:20 +0100 -Subject: [PATCH 730/806] hid: usb: Add device quirks for Freeway Airmouse T3 - and MX3 - -These wireless mouse/keyboard combo remote control devices specify -multiple "wheel" events in their report descriptors. The wheel events -are incorrectly defined and apparently map to accelerometer data, leading -to spurious mouse scroll events being generated at an extreme rate when -the device is moved. - -As a workaround, use HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE to mask -feeding the extra wheel events to the input subsystem. - -See: https://github.com/raspberrypi/firmware/issues/1189 - -Signed-off-by: Jonathan Bell ---- - drivers/hid/hid-ids.h | 6 ++++++ - drivers/hid/hid-quirks.c | 2 ++ - 2 files changed, 8 insertions(+) - ---- a/drivers/hid/hid-ids.h -+++ b/drivers/hid/hid-ids.h -@@ -222,6 +222,9 @@ - #define USB_VENDOR_ID_BAANTO 0x2453 - #define USB_DEVICE_ID_BAANTO_MT_190W2 0x0100 - -+#define USB_VENDOR_ID_BEKEN 0x25a7 -+#define USB_DEVICE_ID_AIRMOUSE_T3 0x2402 -+ - #define USB_VENDOR_ID_BELKIN 0x050d - #define USB_DEVICE_ID_FLIP_KVM 0x3201 - -@@ -1192,6 +1195,9 @@ - #define USB_VENDOR_ID_XAT 0x2505 - #define USB_DEVICE_ID_XAT_CSR 0x0220 - -+#define USB_VENDOR_ID_XENTA 0x1d57 -+#define USB_DEVICE_ID_AIRMOUSE_MX3 0xad03 -+ - #define USB_VENDOR_ID_XIN_MO 0x16c0 - #define USB_DEVICE_ID_XIN_MO_DUAL_ARCADE 0x05e1 - #define USB_DEVICE_ID_THT_2P_ARCADE 0x75e1 ---- a/drivers/hid/hid-quirks.c -+++ b/drivers/hid/hid-quirks.c -@@ -43,6 +43,7 @@ static const struct hid_device_id hid_qu - { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682), HID_QUIRK_NOGET }, - { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS692), HID_QUIRK_NOGET }, - { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM), HID_QUIRK_NOGET }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_BEKEN, USB_DEVICE_ID_AIRMOUSE_T3), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, - { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH), HID_QUIRK_MULTI_INPUT }, - { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL }, - { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE2), HID_QUIRK_ALWAYS_POLL }, -@@ -174,6 +175,7 @@ static const struct hid_device_id hid_qu - { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET), HID_QUIRK_MULTI_INPUT }, - { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD2, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS), HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, - { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD), HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, -+ { HID_USB_DEVICE(USB_VENDOR_ID_XENTA, USB_DEVICE_ID_AIRMOUSE_MX3), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, - - { 0 } - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0731-drm-vc4-Add-Broadcast-RGB-connector-property.patch b/target/linux/brcm2708/patches-4.19/950-0731-drm-vc4-Add-Broadcast-RGB-connector-property.patch deleted file mode 100644 index 2d1f9b9643..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0731-drm-vc4-Add-Broadcast-RGB-connector-property.patch +++ /dev/null @@ -1,302 +0,0 @@ -From b96e24487cc48a2cb593f27c24074087a21de848 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 14 Jun 2019 10:12:07 +0100 -Subject: [PATCH 731/806] drm/vc4: Add "Broadcast RGB" connector property - -Some HDMI monitors do not abide by the full or limited -(16-235) range RGB flags in the AVI infoframe. This can -result in images looking washed out (if given limited and -interpreting as full), or detail disappearing at the extremes -(given full and interpreting as limited). - -Copy the Intel i915 driver's approach of adding an override -property ("Broadcast RGB") to force one mode or the other. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 190 +++++++++++++++++++++++-- - 1 file changed, 177 insertions(+), 13 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -285,6 +285,13 @@ to_vc4_fkms_encoder(struct drm_encoder * - return container_of(encoder, struct vc4_fkms_encoder, base); - } - -+/* "Broadcast RGB" property. -+ * Allows overriding of HDMI full or limited range RGB -+ */ -+#define VC4_BROADCAST_RGB_AUTO 0 -+#define VC4_BROADCAST_RGB_FULL 1 -+#define VC4_BROADCAST_RGB_LIMITED 2 -+ - /* VC4 FKMS connector KMS struct */ - struct vc4_fkms_connector { - struct drm_connector base; -@@ -297,6 +304,8 @@ struct vc4_fkms_connector { - struct vc4_dev *vc4_dev; - u32 display_number; - u32 display_type; -+ -+ struct drm_property *broadcast_rgb_property; - }; - - static inline struct vc4_fkms_connector * -@@ -305,6 +314,16 @@ to_vc4_fkms_connector(struct drm_connect - return container_of(connector, struct vc4_fkms_connector, base); - } - -+/* VC4 FKMS connector state */ -+struct vc4_fkms_connector_state { -+ struct drm_connector_state base; -+ -+ int broadcast_rgb; -+}; -+ -+#define to_vc4_fkms_connector_state(x) \ -+ container_of(x, struct vc4_fkms_connector_state, base) -+ - static u32 vc4_get_display_type(u32 display_number) - { - const u32 display_types[] = { -@@ -832,8 +851,6 @@ static void vc4_crtc_mode_set_nofb(struc - mode->picture_aspect_ratio, mode->flags); - mb.timings.display = vc4_crtc->display_number; - -- mb.timings.video_id_code = frame.avi.video_code; -- - mb.timings.clock = mode->clock; - mb.timings.hdisplay = mode->hdisplay; - mb.timings.hsync_start = mode->hsync_start; -@@ -871,11 +888,30 @@ static void vc4_crtc_mode_set_nofb(struc - break; - } - -- if (!vc4_encoder->hdmi_monitor) -+ if (!vc4_encoder->hdmi_monitor) { - mb.timings.flags |= TIMINGS_FLAGS_DVI; -- else if (drm_default_rgb_quant_range(mode) == -+ mb.timings.video_id_code = frame.avi.video_code; -+ } else { -+ struct vc4_fkms_connector_state *conn_state = -+ to_vc4_fkms_connector_state(vc4_crtc->connector->state); -+ -+ /* Do not provide a VIC as the HDMI spec requires that we do not -+ * signal the opposite of the defined range in the AVI -+ * infoframe. -+ */ -+ mb.timings.video_id_code = 0; -+ -+ if (conn_state->broadcast_rgb == VC4_BROADCAST_RGB_AUTO) { -+ /* See CEA-861-E - 5.1 Default Encoding Parameters */ -+ if (drm_default_rgb_quant_range(mode) == - HDMI_QUANTIZATION_RANGE_LIMITED) -- mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; -+ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; -+ } else { -+ if (conn_state->broadcast_rgb == -+ VC4_BROADCAST_RGB_LIMITED) -+ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; -+ } -+ } - - /* - FIXME: To implement -@@ -1340,13 +1376,95 @@ static void vc4_fkms_connector_destroy(s - drm_connector_cleanup(connector); - } - -+/** -+ * vc4_connector_duplicate_state - duplicate connector state -+ * @connector: digital connector -+ * -+ * Allocates and returns a copy of the connector state (both common and -+ * digital connector specific) for the specified connector. -+ * -+ * Returns: The newly allocated connector state, or NULL on failure. -+ */ -+struct drm_connector_state * -+vc4_connector_duplicate_state(struct drm_connector *connector) -+{ -+ struct vc4_fkms_connector_state *state; -+ -+ state = kmemdup(connector->state, sizeof(*state), GFP_KERNEL); -+ if (!state) -+ return NULL; -+ -+ __drm_atomic_helper_connector_duplicate_state(connector, &state->base); -+ return &state->base; -+} -+ -+/** -+ * vc4_connector_atomic_get_property - hook for connector->atomic_get_property. -+ * @connector: Connector to get the property for. -+ * @state: Connector state to retrieve the property from. -+ * @property: Property to retrieve. -+ * @val: Return value for the property. -+ * -+ * Returns the atomic property value for a digital connector. -+ */ -+int vc4_connector_atomic_get_property(struct drm_connector *connector, -+ const struct drm_connector_state *state, -+ struct drm_property *property, -+ uint64_t *val) -+{ -+ struct vc4_fkms_connector *fkms_connector = -+ to_vc4_fkms_connector(connector); -+ struct vc4_fkms_connector_state *vc4_conn_state = -+ to_vc4_fkms_connector_state(state); -+ -+ if (property == fkms_connector->broadcast_rgb_property) { -+ *val = vc4_conn_state->broadcast_rgb; -+ } else { -+ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", -+ property->base.id, property->name); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/** -+ * vc4_connector_atomic_set_property - hook for connector->atomic_set_property. -+ * @connector: Connector to set the property for. -+ * @state: Connector state to set the property on. -+ * @property: Property to set. -+ * @val: New value for the property. -+ * -+ * Sets the atomic property value for a digital connector. -+ */ -+int vc4_connector_atomic_set_property(struct drm_connector *connector, -+ struct drm_connector_state *state, -+ struct drm_property *property, -+ uint64_t val) -+{ -+ struct vc4_fkms_connector *fkms_connector = -+ to_vc4_fkms_connector(connector); -+ struct vc4_fkms_connector_state *vc4_conn_state = -+ to_vc4_fkms_connector_state(state); -+ -+ if (property == fkms_connector->broadcast_rgb_property) { -+ vc4_conn_state->broadcast_rgb = val; -+ return 0; -+ } -+ -+ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", -+ property->base.id, property->name); -+ return -EINVAL; -+} -+ - static const struct drm_connector_funcs vc4_fkms_connector_funcs = { - .detect = vc4_fkms_connector_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = vc4_fkms_connector_destroy, -- .reset = drm_atomic_helper_connector_reset, -- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, -+ .atomic_duplicate_state = vc4_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -+ .atomic_get_property = vc4_connector_atomic_get_property, -+ .atomic_set_property = vc4_connector_atomic_set_property, - }; - - static const struct drm_connector_helper_funcs vc4_fkms_connector_helper_funcs = { -@@ -1359,12 +1477,40 @@ static const struct drm_connector_helper - .best_encoder = vc4_fkms_connector_best_encoder, - }; - -+static const struct drm_prop_enum_list broadcast_rgb_names[] = { -+ { VC4_BROADCAST_RGB_AUTO, "Automatic" }, -+ { VC4_BROADCAST_RGB_FULL, "Full" }, -+ { VC4_BROADCAST_RGB_LIMITED, "Limited 16:235" }, -+}; -+ -+static void -+vc4_attach_broadcast_rgb_property(struct vc4_fkms_connector *fkms_connector) -+{ -+ struct drm_device *dev = fkms_connector->base.dev; -+ struct drm_property *prop; -+ -+ prop = fkms_connector->broadcast_rgb_property; -+ if (!prop) { -+ prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, -+ "Broadcast RGB", -+ broadcast_rgb_names, -+ ARRAY_SIZE(broadcast_rgb_names)); -+ if (!prop) -+ return; -+ -+ fkms_connector->broadcast_rgb_property = prop; -+ } -+ -+ drm_object_attach_property(&fkms_connector->base.base, prop, 0); -+} -+ - static struct drm_connector * - vc4_fkms_connector_init(struct drm_device *dev, struct drm_encoder *encoder, - u32 display_num) - { - struct drm_connector *connector = NULL; - struct vc4_fkms_connector *fkms_connector; -+ struct vc4_fkms_connector_state *conn_state = NULL; - struct vc4_dev *vc4_dev = to_vc4_dev(dev); - int ret = 0; - -@@ -1373,9 +1519,18 @@ vc4_fkms_connector_init(struct drm_devic - fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), - GFP_KERNEL); - if (!fkms_connector) { -- ret = -ENOMEM; -- goto fail; -+ return ERR_PTR(-ENOMEM); -+ } -+ -+ /* -+ * Allocate enough memory to hold vc4_fkms_connector_state, -+ */ -+ conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL); -+ if (!conn_state) { -+ kfree(fkms_connector); -+ return ERR_PTR(-ENOMEM); - } -+ - connector = &fkms_connector->base; - - fkms_connector->encoder = encoder; -@@ -1383,6 +1538,9 @@ vc4_fkms_connector_init(struct drm_devic - fkms_connector->display_type = vc4_get_display_type(display_num); - fkms_connector->vc4_dev = vc4_dev; - -+ __drm_atomic_helper_connector_reset(connector, -+ &conn_state->base); -+ - if (fkms_connector->display_type == DRM_MODE_ENCODER_DSI) { - drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, - DRM_MODE_CONNECTOR_DSI); -@@ -1403,10 +1561,14 @@ vc4_fkms_connector_init(struct drm_devic - connector->interlace_allowed = 0; - } - -- /* Create and attach TV margin props to this connector. */ -- ret = drm_mode_create_tv_margin_properties(dev); -- if (ret) -- return ERR_PTR(ret); -+ /* Create and attach TV margin props to this connector. -+ * Already done for SDTV outputs. -+ */ -+ if (fkms_connector->display_type != DRM_MODE_ENCODER_TVDAC) { -+ ret = drm_mode_create_tv_margin_properties(dev); -+ if (ret) -+ goto fail; -+ } - - drm_connector_attach_tv_margin_properties(connector); - -@@ -1415,6 +1577,8 @@ vc4_fkms_connector_init(struct drm_devic - - connector->doublescan_allowed = 0; - -+ vc4_attach_broadcast_rgb_property(fkms_connector); -+ - drm_connector_attach_encoder(connector, encoder); - - return connector; diff --git a/target/linux/brcm2708/patches-4.19/950-0731-dts-Add-DTS-for-Pi-2B-rev-1.2-with-BCM2837-3235.patch b/target/linux/brcm2708/patches-4.19/950-0731-dts-Add-DTS-for-Pi-2B-rev-1.2-with-BCM2837-3235.patch new file mode 100644 index 0000000000..1f690a2582 --- /dev/null +++ b/target/linux/brcm2708/patches-4.19/950-0731-dts-Add-DTS-for-Pi-2B-rev-1.2-with-BCM2837-3235.patch @@ -0,0 +1,171 @@ +From 75967d69ea58555d12a7d9058653a69210d2ba86 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 18 Sep 2019 09:02:10 +0100 +Subject: [PATCH] dts: Add DTS for Pi 2B rev 1.2 with BCM2837 (#3235) + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm2710-rpi-2-b.dts | 125 ++++++++++++++++++ + arch/arm64/boot/dts/broadcom/Makefile | 2 + + .../boot/dts/broadcom/bcm2710-rpi-2-b.dts | 3 + + 4 files changed, 131 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm2710-rpi-2-b.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-2-b.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2708-rpi-zero.dtb \ + bcm2708-rpi-zero-w.dtb \ + bcm2709-rpi-2-b.dtb \ ++ bcm2710-rpi-2-b.dtb \ + bcm2710-rpi-3-b.dtb \ + bcm2711-rpi-4-b.dtb \ + bcm2710-rpi-3-b-plus.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts +@@ -0,0 +1,125 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++ ++/ { ++ compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837"; ++ model = "Raspberry Pi 2 Model B rev 1.2"; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++ ++ pwr_led: pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&gpio 35 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ }; ++}; +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -1,7 +1,9 @@ + # SPDX-License-Identifier: GPL-2.0 + dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ + bcm2837-rpi-3-b-plus.dtb ++dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-2-b.dtb + dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb ++dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-2-b.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-2-b.dts +@@ -0,0 +1,3 @@ ++#define RPI364 ++ ++#include "../../../../arm/boot/dts/bcm2710-rpi-2-b.dts" diff --git a/target/linux/brcm2708/patches-4.19/950-0732-drm-connector-Add-documentation-for-drm_cmdline_mode.patch b/target/linux/brcm2708/patches-4.19/950-0732-drm-connector-Add-documentation-for-drm_cmdline_mode.patch deleted file mode 100644 index 215b944d59..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0732-drm-connector-Add-documentation-for-drm_cmdline_mode.patch +++ /dev/null @@ -1,125 +0,0 @@ -From 7c0f4f4d81958f63abf696e71b342e8b75a6e530 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 19 Jun 2019 12:17:48 +0200 -Subject: [PATCH 732/806] drm/connector: Add documentation for drm_cmdline_mode -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -commit 772cd52c5574b04b00a97d638b2cfe94c0c1a9b6 upstream. - -The struct drm_cmdline_mode holds the result of the command line parsers. -However, it wasn't documented so far, so let's do that. - -Reviewed-by: Noralf Trønnes -Signed-off-by: Maxime Ripard -Link: https://patchwork.freedesktop.org/patch/msgid/963c893c16c6a25fc469b53c726f493d99bdc578.1560783090.git-series.maxime.ripard@bootlin.com ---- - include/drm/drm_connector.h | 86 ++++++++++++++++++++++++++++++++++++- - 1 file changed, 84 insertions(+), 2 deletions(-) - ---- a/include/drm/drm_connector.h -+++ b/include/drm/drm_connector.h -@@ -755,18 +755,100 @@ struct drm_connector_funcs { - const struct drm_connector_state *state); - }; - --/* mode specified on the command line */ -+/** -+ * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line -+ * -+ * Each connector can have an initial mode with additional options -+ * passed through the kernel command line. This structure allows to -+ * express those parameters and will be filled by the command-line -+ * parser. -+ */ - struct drm_cmdline_mode { -+ /** -+ * @specified: -+ * -+ * Has a mode been read from the command-line? -+ */ - bool specified; -+ -+ /** -+ * @refresh_specified: -+ * -+ * Did the mode have a preferred refresh rate? -+ */ - bool refresh_specified; -+ -+ /** -+ * @bpp_specified: -+ * -+ * Did the mode have a preferred BPP? -+ */ - bool bpp_specified; -- int xres, yres; -+ -+ /** -+ * @xres: -+ * -+ * Active resolution on the X axis, in pixels. -+ */ -+ int xres; -+ -+ /** -+ * @yres: -+ * -+ * Active resolution on the Y axis, in pixels. -+ */ -+ int yres; -+ -+ /** -+ * @bpp: -+ * -+ * Bits per pixels for the mode. -+ */ - int bpp; -+ -+ /** -+ * @refresh: -+ * -+ * Refresh rate, in Hertz. -+ */ - int refresh; -+ -+ /** -+ * @rb: -+ * -+ * Do we need to use reduced blanking? -+ */ - bool rb; -+ -+ /** -+ * @interlace: -+ * -+ * The mode is interlaced. -+ */ - bool interlace; -+ -+ /** -+ * @cvt: -+ * -+ * The timings will be calculated using the VESA Coordinated -+ * Video Timings instead of looking up the mode from a table. -+ */ - bool cvt; -+ -+ /** -+ * @margins: -+ * -+ * Add margins to the mode calculation (1.8% of xres rounded -+ * down to 8 pixels and 1.8% of yres). -+ */ - bool margins; -+ -+ /** -+ * @force: -+ * -+ * Ignore the hotplug state of the connector, and force its -+ * state to one of the DRM_FORCE_* values. -+ */ - enum drm_connector_force force; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0733-drm-modes-Rewrite-the-command-line-parser.patch b/target/linux/brcm2708/patches-4.19/950-0733-drm-modes-Rewrite-the-command-line-parser.patch deleted file mode 100644 index 1c0e2d372c..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0733-drm-modes-Rewrite-the-command-line-parser.patch +++ /dev/null @@ -1,392 +0,0 @@ -From 3508a8548f13be68b6d098ad99a7bc1fc1810f76 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 19 Jun 2019 12:17:49 +0200 -Subject: [PATCH 733/806] drm/modes: Rewrite the command line parser -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -commit e08ab74bd4c7a5fe311bc05f32dbb4f1e7fa3428 upstream. - -Rewrite the command line parser in order to get away from the state machine -parsing the video mode lines. - -Hopefully, this will allow to extend it more easily to support named modes -and / or properties set directly on the command line. - -Reviewed-by: Noralf Trønnes -Signed-off-by: Maxime Ripard -Link: https://patchwork.freedesktop.org/patch/msgid/e32cd4009153b184103554009135c7bf7c9975d7.1560783090.git-series.maxime.ripard@bootlin.com ---- - drivers/gpu/drm/drm_modes.c | 325 +++++++++++++++++++++++------------- - 1 file changed, 210 insertions(+), 115 deletions(-) - ---- a/drivers/gpu/drm/drm_modes.c -+++ b/drivers/gpu/drm/drm_modes.c -@@ -30,6 +30,7 @@ - * authorization from the copyright holder(s) and author(s). - */ - -+#include - #include - #include - #include -@@ -1414,6 +1415,151 @@ void drm_connector_list_update(struct dr - } - EXPORT_SYMBOL(drm_connector_list_update); - -+static int drm_mode_parse_cmdline_bpp(const char *str, char **end_ptr, -+ struct drm_cmdline_mode *mode) -+{ -+ unsigned int bpp; -+ -+ if (str[0] != '-') -+ return -EINVAL; -+ -+ str++; -+ bpp = simple_strtol(str, end_ptr, 10); -+ if (*end_ptr == str) -+ return -EINVAL; -+ -+ mode->bpp = bpp; -+ mode->bpp_specified = true; -+ -+ return 0; -+} -+ -+static int drm_mode_parse_cmdline_refresh(const char *str, char **end_ptr, -+ struct drm_cmdline_mode *mode) -+{ -+ unsigned int refresh; -+ -+ if (str[0] != '@') -+ return -EINVAL; -+ -+ str++; -+ refresh = simple_strtol(str, end_ptr, 10); -+ if (*end_ptr == str) -+ return -EINVAL; -+ -+ mode->refresh = refresh; -+ mode->refresh_specified = true; -+ -+ return 0; -+} -+ -+static int drm_mode_parse_cmdline_extra(const char *str, int length, -+ struct drm_connector *connector, -+ struct drm_cmdline_mode *mode) -+{ -+ int i; -+ -+ for (i = 0; i < length; i++) { -+ switch (str[i]) { -+ case 'i': -+ mode->interlace = true; -+ break; -+ case 'm': -+ mode->margins = true; -+ break; -+ case 'D': -+ if (mode->force != DRM_FORCE_UNSPECIFIED) -+ return -EINVAL; -+ -+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) && -+ (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) -+ mode->force = DRM_FORCE_ON; -+ else -+ mode->force = DRM_FORCE_ON_DIGITAL; -+ break; -+ case 'd': -+ if (mode->force != DRM_FORCE_UNSPECIFIED) -+ return -EINVAL; -+ -+ mode->force = DRM_FORCE_OFF; -+ break; -+ case 'e': -+ if (mode->force != DRM_FORCE_UNSPECIFIED) -+ return -EINVAL; -+ -+ mode->force = DRM_FORCE_ON; -+ break; -+ default: -+ return -EINVAL; -+ } -+ } -+ -+ return 0; -+} -+ -+static int drm_mode_parse_cmdline_res_mode(const char *str, unsigned int length, -+ bool extras, -+ struct drm_connector *connector, -+ struct drm_cmdline_mode *mode) -+{ -+ const char *str_start = str; -+ bool rb = false, cvt = false; -+ int xres = 0, yres = 0; -+ int remaining, i; -+ char *end_ptr; -+ -+ xres = simple_strtol(str, &end_ptr, 10); -+ if (end_ptr == str) -+ return -EINVAL; -+ -+ if (end_ptr[0] != 'x') -+ return -EINVAL; -+ end_ptr++; -+ -+ str = end_ptr; -+ yres = simple_strtol(str, &end_ptr, 10); -+ if (end_ptr == str) -+ return -EINVAL; -+ -+ remaining = length - (end_ptr - str_start); -+ if (remaining < 0) -+ return -EINVAL; -+ -+ for (i = 0; i < remaining; i++) { -+ switch (end_ptr[i]) { -+ case 'M': -+ cvt = true; -+ break; -+ case 'R': -+ rb = true; -+ break; -+ default: -+ /* -+ * Try to pass that to our extras parsing -+ * function to handle the case where the -+ * extras are directly after the resolution -+ */ -+ if (extras) { -+ int ret = drm_mode_parse_cmdline_extra(end_ptr + i, -+ 1, -+ connector, -+ mode); -+ if (ret) -+ return ret; -+ } else { -+ return -EINVAL; -+ } -+ } -+ } -+ -+ mode->xres = xres; -+ mode->yres = yres; -+ mode->cvt = cvt; -+ mode->rb = rb; -+ -+ return 0; -+} -+ - /** - * drm_mode_parse_command_line_for_connector - parse command line modeline for connector - * @mode_option: optional per connector mode option -@@ -1440,13 +1586,12 @@ bool drm_mode_parse_command_line_for_con - struct drm_cmdline_mode *mode) - { - const char *name; -- unsigned int namelen; -- bool res_specified = false, bpp_specified = false, refresh_specified = false; -- unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0; -- bool yres_specified = false, cvt = false, rb = false; -- bool interlace = false, margins = false, was_digit = false; -- int i; -- enum drm_connector_force force = DRM_FORCE_UNSPECIFIED; -+ bool parse_extras = false; -+ unsigned int bpp_off = 0, refresh_off = 0; -+ unsigned int mode_end = 0; -+ char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL; -+ char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL; -+ int ret; - - #ifdef CONFIG_FB - if (!mode_option) -@@ -1459,127 +1604,77 @@ bool drm_mode_parse_command_line_for_con - } - - name = mode_option; -- namelen = strlen(name); -- for (i = namelen-1; i >= 0; i--) { -- switch (name[i]) { -- case '@': -- if (!refresh_specified && !bpp_specified && -- !yres_specified && !cvt && !rb && was_digit) { -- refresh = simple_strtol(&name[i+1], NULL, 10); -- refresh_specified = true; -- was_digit = false; -- } else -- goto done; -- break; -- case '-': -- if (!bpp_specified && !yres_specified && !cvt && -- !rb && was_digit) { -- bpp = simple_strtol(&name[i+1], NULL, 10); -- bpp_specified = true; -- was_digit = false; -- } else -- goto done; -- break; -- case 'x': -- if (!yres_specified && was_digit) { -- yres = simple_strtol(&name[i+1], NULL, 10); -- yres_specified = true; -- was_digit = false; -- } else -- goto done; -- break; -- case '0' ... '9': -- was_digit = true; -- break; -- case 'M': -- if (yres_specified || cvt || was_digit) -- goto done; -- cvt = true; -- break; -- case 'R': -- if (yres_specified || cvt || rb || was_digit) -- goto done; -- rb = true; -- break; -- case 'm': -- if (cvt || yres_specified || was_digit) -- goto done; -- margins = true; -- break; -- case 'i': -- if (cvt || yres_specified || was_digit) -- goto done; -- interlace = true; -- break; -- case 'e': -- if (yres_specified || bpp_specified || refresh_specified || -- was_digit || (force != DRM_FORCE_UNSPECIFIED)) -- goto done; - -- force = DRM_FORCE_ON; -- break; -- case 'D': -- if (yres_specified || bpp_specified || refresh_specified || -- was_digit || (force != DRM_FORCE_UNSPECIFIED)) -- goto done; -+ if (!isdigit(name[0])) -+ return false; - -- if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) && -- (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) -- force = DRM_FORCE_ON; -- else -- force = DRM_FORCE_ON_DIGITAL; -- break; -- case 'd': -- if (yres_specified || bpp_specified || refresh_specified || -- was_digit || (force != DRM_FORCE_UNSPECIFIED)) -- goto done; -+ /* Try to locate the bpp and refresh specifiers, if any */ -+ bpp_ptr = strchr(name, '-'); -+ if (bpp_ptr) { -+ bpp_off = bpp_ptr - name; -+ mode->bpp_specified = true; -+ } - -- force = DRM_FORCE_OFF; -- break; -- default: -- goto done; -- } -+ refresh_ptr = strchr(name, '@'); -+ if (refresh_ptr) { -+ refresh_off = refresh_ptr - name; -+ mode->refresh_specified = true; - } - -- if (i < 0 && yres_specified) { -- char *ch; -- xres = simple_strtol(name, &ch, 10); -- if ((ch != NULL) && (*ch == 'x')) -- res_specified = true; -- else -- i = ch - name; -- } else if (!yres_specified && was_digit) { -- /* catch mode that begins with digits but has no 'x' */ -- i = 0; -- } --done: -- if (i >= 0) { -- pr_warn("[drm] parse error at position %i in video mode '%s'\n", -- i, name); -- mode->specified = false; -- return false; -+ /* Locate the end of the name / resolution, and parse it */ -+ if (bpp_ptr && refresh_ptr) { -+ mode_end = min(bpp_off, refresh_off); -+ } else if (bpp_ptr) { -+ mode_end = bpp_off; -+ } else if (refresh_ptr) { -+ mode_end = refresh_off; -+ } else { -+ mode_end = strlen(name); -+ parse_extras = true; - } - -- if (res_specified) { -- mode->specified = true; -- mode->xres = xres; -- mode->yres = yres; -+ ret = drm_mode_parse_cmdline_res_mode(name, mode_end, -+ parse_extras, -+ connector, -+ mode); -+ if (ret) -+ return false; -+ mode->specified = true; -+ -+ if (bpp_ptr) { -+ ret = drm_mode_parse_cmdline_bpp(bpp_ptr, &bpp_end_ptr, mode); -+ if (ret) -+ return false; - } - -- if (refresh_specified) { -- mode->refresh_specified = true; -- mode->refresh = refresh; -+ if (refresh_ptr) { -+ ret = drm_mode_parse_cmdline_refresh(refresh_ptr, -+ &refresh_end_ptr, mode); -+ if (ret) -+ return false; - } - -- if (bpp_specified) { -- mode->bpp_specified = true; -- mode->bpp = bpp; -+ /* -+ * Locate the end of the bpp / refresh, and parse the extras -+ * if relevant -+ */ -+ if (bpp_ptr && refresh_ptr) -+ extra_ptr = max(bpp_end_ptr, refresh_end_ptr); -+ else if (bpp_ptr) -+ extra_ptr = bpp_end_ptr; -+ else if (refresh_ptr) -+ extra_ptr = refresh_end_ptr; -+ -+ if (extra_ptr) { -+ int remaining = strlen(name) - (extra_ptr - name); -+ -+ /* -+ * We still have characters to process, while -+ * we shouldn't have any -+ */ -+ if (remaining > 0) -+ return false; - } -- mode->rb = rb; -- mode->cvt = cvt; -- mode->interlace = interlace; -- mode->margins = margins; -- mode->force = force; - - return true; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0734-drm-modes-Support-modes-names-on-the-command-line.patch b/target/linux/brcm2708/patches-4.19/950-0734-drm-modes-Support-modes-names-on-the-command-line.patch deleted file mode 100644 index 0ab7cd2abb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0734-drm-modes-Support-modes-names-on-the-command-line.patch +++ /dev/null @@ -1,174 +0,0 @@ -From 2cea4924c69b6be5cfe8d976810ccf76a3991230 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 19 Jun 2019 12:17:50 +0200 -Subject: [PATCH 734/806] drm/modes: Support modes names on the command line -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -commit 3aeeb13d899627fe2b86bdbdcd0927cf7192234f upstream. -Minor conflict resolution as upstream has moved functions -from drm_fb_helper.c to a new drm_client_modeset.c - -The drm subsystem also uses the video= kernel parameter, and in the -documentation refers to the fbdev documentation for that parameter. - -However, that documentation also says that instead of giving the mode using -its resolution we can also give a name. However, DRM doesn't handle that -case at the moment. Even though in most case it shouldn't make any -difference, it might be useful for analog modes, where different standards -might have the same resolution, but still have a few different parameters -that are not encoded in the modes (NTSC vs NTSC-J vs PAL-M for example). - -Reviewed-by: Noralf Trønnes -Signed-off-by: Maxime Ripard -Link: https://patchwork.freedesktop.org/patch/msgid/18443e0c3bdbbd16cea4ec63bc7f2079b820b43b.1560783090.git-series.maxime.ripard@bootlin.com ---- - drivers/gpu/drm/drm_connector.c | 3 +- - drivers/gpu/drm/drm_fb_helper.c | 4 +++ - drivers/gpu/drm/drm_modes.c | 62 ++++++++++++++++++++++++--------- - include/drm/drm_connector.h | 7 ++++ - 4 files changed, 59 insertions(+), 17 deletions(-) - ---- a/drivers/gpu/drm/drm_connector.c -+++ b/drivers/gpu/drm/drm_connector.c -@@ -135,8 +135,9 @@ static void drm_connector_get_cmdline_mo - connector->force = mode->force; - } - -- DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n", -+ DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n", - connector->name, -+ mode->name ? mode->name : "", - mode->xres, mode->yres, - mode->refresh_specified ? mode->refresh : 60, - mode->rb ? " reduced blanking" : "", ---- a/drivers/gpu/drm/drm_fb_helper.c -+++ b/drivers/gpu/drm/drm_fb_helper.c -@@ -2099,6 +2099,10 @@ struct drm_display_mode *drm_pick_cmdlin - prefer_non_interlace = !cmdline_mode->interlace; - again: - list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) { -+ /* Check (optional) mode name first */ -+ if (!strcmp(mode->name, cmdline_mode->name)) -+ return mode; -+ - /* check width/height */ - if (mode->hdisplay != cmdline_mode->xres || - mode->vdisplay != cmdline_mode->yres) ---- a/drivers/gpu/drm/drm_modes.c -+++ b/drivers/gpu/drm/drm_modes.c -@@ -1586,7 +1586,7 @@ bool drm_mode_parse_command_line_for_con - struct drm_cmdline_mode *mode) - { - const char *name; -- bool parse_extras = false; -+ bool named_mode = false, parse_extras = false; - unsigned int bpp_off = 0, refresh_off = 0; - unsigned int mode_end = 0; - char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL; -@@ -1605,8 +1605,22 @@ bool drm_mode_parse_command_line_for_con - - name = mode_option; - -- if (!isdigit(name[0])) -- return false; -+ /* -+ * This is a bit convoluted. To differentiate between the -+ * named modes and poorly formatted resolutions, we need a -+ * bunch of things: -+ * - We need to make sure that the first character (which -+ * would be our resolution in X) is a digit. -+ * - However, if the X resolution is missing, then we end up -+ * with something like x, with our first character -+ * being an alpha-numerical character, which would be -+ * considered a named mode. -+ * -+ * If this isn't enough, we should add more heuristics here, -+ * and matching unit-tests. -+ */ -+ if (!isdigit(name[0]) && name[0] != 'x') -+ named_mode = true; - - /* Try to locate the bpp and refresh specifiers, if any */ - bpp_ptr = strchr(name, '-'); -@@ -1617,6 +1631,9 @@ bool drm_mode_parse_command_line_for_con - - refresh_ptr = strchr(name, '@'); - if (refresh_ptr) { -+ if (named_mode) -+ return false; -+ - refresh_off = refresh_ptr - name; - mode->refresh_specified = true; - } -@@ -1633,12 +1650,16 @@ bool drm_mode_parse_command_line_for_con - parse_extras = true; - } - -- ret = drm_mode_parse_cmdline_res_mode(name, mode_end, -- parse_extras, -- connector, -- mode); -- if (ret) -- return false; -+ if (named_mode) { -+ strncpy(mode->name, name, mode_end); -+ } else { -+ ret = drm_mode_parse_cmdline_res_mode(name, mode_end, -+ parse_extras, -+ connector, -+ mode); -+ if (ret) -+ return false; -+ } - mode->specified = true; - - if (bpp_ptr) { -@@ -1666,14 +1687,23 @@ bool drm_mode_parse_command_line_for_con - extra_ptr = refresh_end_ptr; - - if (extra_ptr) { -- int remaining = strlen(name) - (extra_ptr - name); -+ if (!named_mode) { -+ int len = strlen(name) - (extra_ptr - name); - -- /* -- * We still have characters to process, while -- * we shouldn't have any -- */ -- if (remaining > 0) -- return false; -+ ret = drm_mode_parse_cmdline_extra(extra_ptr, len, -+ connector, mode); -+ if (ret) -+ return false; -+ } else { -+ int remaining = strlen(name) - (extra_ptr - name); -+ -+ /* -+ * We still have characters to process, while -+ * we shouldn't have any -+ */ -+ if (remaining > 0) -+ return false; -+ } - } - - return true; ---- a/include/drm/drm_connector.h -+++ b/include/drm/drm_connector.h -@@ -765,6 +765,13 @@ struct drm_connector_funcs { - */ - struct drm_cmdline_mode { - /** -+ * @name: -+ * -+ * Name of the mode. -+ */ -+ char name[DRM_DISPLAY_MODE_LEN]; -+ -+ /** - * @specified: - * - * Has a mode been read from the command-line? diff --git a/target/linux/brcm2708/patches-4.19/950-0735-drm-modes-Allow-to-specify-rotation-and-reflection-o.patch b/target/linux/brcm2708/patches-4.19/950-0735-drm-modes-Allow-to-specify-rotation-and-reflection-o.patch deleted file mode 100644 index aeb60d182b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0735-drm-modes-Allow-to-specify-rotation-and-reflection-o.patch +++ /dev/null @@ -1,277 +0,0 @@ -From 5a8ccd79b6bad32e52620a94199bf1af2e19708e Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 19 Jun 2019 12:17:51 +0200 -Subject: [PATCH 735/806] drm/modes: Allow to specify rotation and reflection - on the commandline -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Commit 1bf4e09227c345e246062285eba4b8fe660e512e upstream. -Minor conflict resolution as upstream has moved functions -from drm_fb_helper.c to a new drm_client_modeset.c - -Rotations and reflections setup are needed in some scenarios to initialise -properly the initial framebuffer. Some drivers already had a bunch of -quirks to deal with this, such as either a private kernel command line -parameter (omapdss) or on the device tree (various panels). - -In order to accomodate this, let's create a video mode parameter to deal -with the rotation and reflexion. - -Reviewed-by: Noralf Trønnes -Signed-off-by: Maxime Ripard -Link: https://patchwork.freedesktop.org/patch/msgid/777da16e42db757c1f5b414b5ca34507097fed5c.1560783090.git-series.maxime.ripard@bootlin.com ---- - Documentation/fb/modedb.txt | 12 ++++ - drivers/gpu/drm/drm_fb_helper.c | 30 +++++++++ - drivers/gpu/drm/drm_modes.c | 114 ++++++++++++++++++++++++++------ - include/drm/drm_connector.h | 10 +++ - 4 files changed, 146 insertions(+), 20 deletions(-) - ---- a/Documentation/fb/modedb.txt -+++ b/Documentation/fb/modedb.txt -@@ -51,6 +51,18 @@ To force the VGA output to be enabled an - Specifying the option multiple times for different ports is possible, e.g.: - video=LVDS-1:d video=HDMI-1:D - -+Options can also be passed after the mode, using commas as separator. -+ -+ Sample usage: 720x480,rotate=180 - 720x480 mode, rotated by 180 degrees -+ -+Valid options are: -+ -+ - reflect_x (boolean): Perform an axial symmetry on the X axis -+ - reflect_y (boolean): Perform an axial symmetry on the Y axis -+ - rotate (integer): Rotate the initial framebuffer by x -+ degrees. Valid values are 0, 90, 180 and 270. -+ -+ - ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** - - What is the VESA(TM) Coordinated Video Timings (CVT)? ---- a/drivers/gpu/drm/drm_fb_helper.c -+++ b/drivers/gpu/drm/drm_fb_helper.c -@@ -2464,6 +2464,7 @@ static void drm_setup_crtc_rotation(stru - struct drm_connector *connector) - { - struct drm_plane *plane = fb_crtc->mode_set.crtc->primary; -+ struct drm_cmdline_mode *cmdline; - uint64_t valid_mask = 0; - int i, rotation; - -@@ -2483,6 +2484,35 @@ static void drm_setup_crtc_rotation(stru - rotation = DRM_MODE_ROTATE_0; - } - -+ /** -+ * The panel already defined the default rotation -+ * through its orientation. Whatever has been provided -+ * on the command line needs to be added to that. -+ * -+ * Unfortunately, the rotations are at different bit -+ * indices, so the math to add them up are not as -+ * trivial as they could. -+ * -+ * Reflections on the other hand are pretty trivial to deal with, a -+ * simple XOR between the two handle the addition nicely. -+ */ -+ cmdline = &connector->cmdline_mode; -+ if (cmdline->specified) { -+ unsigned int cmdline_rest, panel_rest; -+ unsigned int cmdline_rot, panel_rot; -+ unsigned int sum_rot, sum_rest; -+ -+ panel_rot = ilog2(rotation & DRM_MODE_ROTATE_MASK); -+ cmdline_rot = ilog2(cmdline->rotation_reflection & DRM_MODE_ROTATE_MASK); -+ sum_rot = (panel_rot + cmdline_rot) % 4; -+ -+ panel_rest = rotation & ~DRM_MODE_ROTATE_MASK; -+ cmdline_rest = cmdline->rotation_reflection & ~DRM_MODE_ROTATE_MASK; -+ sum_rest = panel_rest ^ cmdline_rest; -+ -+ rotation = (1 << sum_rot) | sum_rest; -+ } -+ - /* - * TODO: support 90 / 270 degree hardware rotation, - * depending on the hardware this may require the framebuffer ---- a/drivers/gpu/drm/drm_modes.c -+++ b/drivers/gpu/drm/drm_modes.c -@@ -1560,6 +1560,71 @@ static int drm_mode_parse_cmdline_res_mo - return 0; - } - -+static int drm_mode_parse_cmdline_options(char *str, size_t len, -+ struct drm_connector *connector, -+ struct drm_cmdline_mode *mode) -+{ -+ unsigned int rotation = 0; -+ char *sep = str; -+ -+ while ((sep = strchr(sep, ','))) { -+ char *delim, *option; -+ -+ option = sep + 1; -+ delim = strchr(option, '='); -+ if (!delim) { -+ delim = strchr(option, ','); -+ -+ if (!delim) -+ delim = str + len; -+ } -+ -+ if (!strncmp(option, "rotate", delim - option)) { -+ const char *value = delim + 1; -+ unsigned int deg; -+ -+ deg = simple_strtol(value, &sep, 10); -+ -+ /* Make sure we have parsed something */ -+ if (sep == value) -+ return -EINVAL; -+ -+ switch (deg) { -+ case 0: -+ rotation |= DRM_MODE_ROTATE_0; -+ break; -+ -+ case 90: -+ rotation |= DRM_MODE_ROTATE_90; -+ break; -+ -+ case 180: -+ rotation |= DRM_MODE_ROTATE_180; -+ break; -+ -+ case 270: -+ rotation |= DRM_MODE_ROTATE_270; -+ break; -+ -+ default: -+ return -EINVAL; -+ } -+ } else if (!strncmp(option, "reflect_x", delim - option)) { -+ rotation |= DRM_MODE_REFLECT_X; -+ sep = delim; -+ } else if (!strncmp(option, "reflect_y", delim - option)) { -+ rotation |= DRM_MODE_REFLECT_Y; -+ sep = delim; -+ } else { -+ return -EINVAL; -+ } -+ } -+ -+ mode->rotation_reflection = rotation; -+ -+ return 0; -+} -+ - /** - * drm_mode_parse_command_line_for_connector - parse command line modeline for connector - * @mode_option: optional per connector mode option -@@ -1575,6 +1640,10 @@ static int drm_mode_parse_cmdline_res_mo - * - * x[M][R][-][@][i][m][eDd] - * -+ * Additionals options can be provided following the mode, using a comma to -+ * separate each option. Valid options can be found in -+ * Documentation/fb/modedb.txt. -+ * - * The intermediate drm_cmdline_mode structure is required to store additional - * options from the command line modline like the force-enable/disable flag. - * -@@ -1587,9 +1656,10 @@ bool drm_mode_parse_command_line_for_con - { - const char *name; - bool named_mode = false, parse_extras = false; -- unsigned int bpp_off = 0, refresh_off = 0; -+ unsigned int bpp_off = 0, refresh_off = 0, options_off = 0; - unsigned int mode_end = 0; - char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL; -+ char *options_ptr = NULL; - char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL; - int ret; - -@@ -1638,13 +1708,18 @@ bool drm_mode_parse_command_line_for_con - mode->refresh_specified = true; - } - -+ /* Locate the start of named options */ -+ options_ptr = strchr(name, ','); -+ if (options_ptr) -+ options_off = options_ptr - name; -+ - /* Locate the end of the name / resolution, and parse it */ -- if (bpp_ptr && refresh_ptr) { -- mode_end = min(bpp_off, refresh_off); -- } else if (bpp_ptr) { -+ if (bpp_ptr) { - mode_end = bpp_off; - } else if (refresh_ptr) { - mode_end = refresh_off; -+ } else if (options_ptr) { -+ mode_end = options_off; - } else { - mode_end = strlen(name); - parse_extras = true; -@@ -1686,24 +1761,23 @@ bool drm_mode_parse_command_line_for_con - else if (refresh_ptr) - extra_ptr = refresh_end_ptr; - -- if (extra_ptr) { -- if (!named_mode) { -- int len = strlen(name) - (extra_ptr - name); -- -- ret = drm_mode_parse_cmdline_extra(extra_ptr, len, -- connector, mode); -- if (ret) -- return false; -- } else { -- int remaining = strlen(name) - (extra_ptr - name); -+ if (extra_ptr && -+ extra_ptr != options_ptr) { -+ int len = strlen(name) - (extra_ptr - name); - -- /* -- * We still have characters to process, while -- * we shouldn't have any -- */ -- if (remaining > 0) -- return false; -- } -+ ret = drm_mode_parse_cmdline_extra(extra_ptr, len, -+ connector, mode); -+ if (ret) -+ return false; -+ } -+ -+ if (options_ptr) { -+ int len = strlen(name) - (options_ptr - name); -+ -+ ret = drm_mode_parse_cmdline_options(options_ptr, len, -+ connector, mode); -+ if (ret) -+ return false; - } - - return true; ---- a/include/drm/drm_connector.h -+++ b/include/drm/drm_connector.h -@@ -857,6 +857,16 @@ struct drm_cmdline_mode { - * state to one of the DRM_FORCE_* values. - */ - enum drm_connector_force force; -+ -+ /** -+ * @rotation_reflection: -+ * -+ * Initial rotation and reflection of the mode setup from the -+ * command line. See DRM_MODE_ROTATE_* and -+ * DRM_MODE_REFLECT_*. The only rotations supported are -+ * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180. -+ */ -+ unsigned int rotation_reflection; - }; - - /** diff --git a/target/linux/brcm2708/patches-4.19/950-0736-drm-connector-Introduce-a-TV-margins-structure.patch b/target/linux/brcm2708/patches-4.19/950-0736-drm-connector-Introduce-a-TV-margins-structure.patch deleted file mode 100644 index ee4cc20b92..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0736-drm-connector-Introduce-a-TV-margins-structure.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 6261047a83258900e57a0a699ec7954360c6e7f3 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 19 Jun 2019 12:17:51 +0200 -Subject: [PATCH 736/806] drm/connector: Introduce a TV margins structure -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Commit 22045e8e52bd802f743f0471242782fc3b479707 upstream. - -The TV margins has been defined as a structure inside the -drm_connector_state structure so far. However, we will need it in other -structures as well, so let's move that structure definition so that it can -be reused. - -Reviewed-by: Noralf Trønnes -Signed-off-by: Maxime Ripard -Link: https://patchwork.freedesktop.org/patch/msgid/38b773b03f15ec7a135cdf8f7db669e5ada20cf2.1560783090.git-series.maxime.ripard@bootlin.com ---- - include/drm/drm_connector.h | 41 +++++++++++++++++++++++++++---------- - 1 file changed, 30 insertions(+), 11 deletions(-) - ---- a/include/drm/drm_connector.h -+++ b/include/drm/drm_connector.h -@@ -344,13 +344,37 @@ int drm_display_info_set_bus_formats(str - unsigned int num_formats); - - /** -+ * struct drm_connector_tv_margins - TV connector related margins -+ * -+ * Describes the margins in pixels to put around the image on TV -+ * connectors to deal with overscan. -+ */ -+struct drm_connector_tv_margins { -+ /** -+ * @bottom: Bottom margin in pixels. -+ */ -+ unsigned int bottom; -+ -+ /** -+ * @left: Left margin in pixels. -+ */ -+ unsigned int left; -+ -+ /** -+ * @right: Right margin in pixels. -+ */ -+ unsigned int right; -+ -+ /** -+ * @top: Top margin in pixels. -+ */ -+ unsigned int top; -+}; -+ -+/** - * struct drm_tv_connector_state - TV connector related states - * @subconnector: selected subconnector -- * @margins: margins (all margins are expressed in pixels) -- * @margins.left: left margin -- * @margins.right: right margin -- * @margins.top: top margin -- * @margins.bottom: bottom margin -+ * @margins: TV margins - * @mode: TV mode - * @brightness: brightness in percent - * @contrast: contrast in percent -@@ -361,12 +385,7 @@ int drm_display_info_set_bus_formats(str - */ - struct drm_tv_connector_state { - enum drm_mode_subconnector subconnector; -- struct { -- unsigned int left; -- unsigned int right; -- unsigned int top; -- unsigned int bottom; -- } margins; -+ struct drm_connector_tv_margins margins; - unsigned int mode; - unsigned int brightness; - unsigned int contrast; diff --git a/target/linux/brcm2708/patches-4.19/950-0737-drm-modes-Parse-overscan-properties.patch b/target/linux/brcm2708/patches-4.19/950-0737-drm-modes-Parse-overscan-properties.patch deleted file mode 100644 index 9077034af6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0737-drm-modes-Parse-overscan-properties.patch +++ /dev/null @@ -1,102 +0,0 @@ -From 99b367ee521e48beae92bea59515dd0f08f2e55b Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 19 Jun 2019 12:17:51 +0200 -Subject: [PATCH 737/806] drm/modes: Parse overscan properties -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Commit 3d46a3007cd8f73bae502bf5c171977b91d7aacc upstream. - -Properly configuring the overscan properties might be needed for the -initial setup of the framebuffer for display that still have overscan. -Let's allow for more properties on the kernel command line to setup each -margin. - -Reviewed-by: Noralf Trønnes -Signed-off-by: Maxime Ripard -Link: https://patchwork.freedesktop.org/patch/msgid/e481f1628e3768ca49226ec2115cfa4dfcbd5e4c.1560783090.git-series.maxime.ripard@bootlin.com ---- - Documentation/fb/modedb.txt | 2 ++ - drivers/gpu/drm/drm_modes.c | 44 +++++++++++++++++++++++++++++++++++++ - include/drm/drm_connector.h | 5 +++++ - 3 files changed, 51 insertions(+) - ---- a/Documentation/fb/modedb.txt -+++ b/Documentation/fb/modedb.txt -@@ -57,6 +57,8 @@ Options can also be passed after the mod - - Valid options are: - -+ - margin_top, margin_bottom, margin_left, margin_right (integer): -+ Number of pixels in the margins, typically to deal with overscan on TVs - - reflect_x (boolean): Perform an axial symmetry on the X axis - - reflect_y (boolean): Perform an axial symmetry on the Y axis - - rotate (integer): Rotate the initial framebuffer by x ---- a/drivers/gpu/drm/drm_modes.c -+++ b/drivers/gpu/drm/drm_modes.c -@@ -1615,6 +1615,50 @@ static int drm_mode_parse_cmdline_option - } else if (!strncmp(option, "reflect_y", delim - option)) { - rotation |= DRM_MODE_REFLECT_Y; - sep = delim; -+ } else if (!strncmp(option, "margin_right", delim - option)) { -+ const char *value = delim + 1; -+ unsigned int margin; -+ -+ margin = simple_strtol(value, &sep, 10); -+ -+ /* Make sure we have parsed something */ -+ if (sep == value) -+ return -EINVAL; -+ -+ mode->tv_margins.right = margin; -+ } else if (!strncmp(option, "margin_left", delim - option)) { -+ const char *value = delim + 1; -+ unsigned int margin; -+ -+ margin = simple_strtol(value, &sep, 10); -+ -+ /* Make sure we have parsed something */ -+ if (sep == value) -+ return -EINVAL; -+ -+ mode->tv_margins.left = margin; -+ } else if (!strncmp(option, "margin_top", delim - option)) { -+ const char *value = delim + 1; -+ unsigned int margin; -+ -+ margin = simple_strtol(value, &sep, 10); -+ -+ /* Make sure we have parsed something */ -+ if (sep == value) -+ return -EINVAL; -+ -+ mode->tv_margins.top = margin; -+ } else if (!strncmp(option, "margin_bottom", delim - option)) { -+ const char *value = delim + 1; -+ unsigned int margin; -+ -+ margin = simple_strtol(value, &sep, 10); -+ -+ /* Make sure we have parsed something */ -+ if (sep == value) -+ return -EINVAL; -+ -+ mode->tv_margins.bottom = margin; - } else { - return -EINVAL; - } ---- a/include/drm/drm_connector.h -+++ b/include/drm/drm_connector.h -@@ -886,6 +886,11 @@ struct drm_cmdline_mode { - * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180. - */ - unsigned int rotation_reflection; -+ -+ /** -+ * @tv_margins: TV margins to apply to the mode. -+ */ -+ struct drm_connector_tv_margins tv_margins; - }; - - /** diff --git a/target/linux/brcm2708/patches-4.19/950-0738-drm-atomic-Add-a-function-to-reset-connector-TV-prop.patch b/target/linux/brcm2708/patches-4.19/950-0738-drm-atomic-Add-a-function-to-reset-connector-TV-prop.patch deleted file mode 100644 index cc02184516..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0738-drm-atomic-Add-a-function-to-reset-connector-TV-prop.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 8dd1e4d73fdbc4a533a58c2c74a72877257c558c Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 19 Jun 2019 12:17:52 +0200 -Subject: [PATCH 738/806] drm/atomic: Add a function to reset connector TV - properties -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Commit 731514b446fe6748d5a55a3dff202efb45c7d8df upstream. -Reworked as functions have been moved from drm_atomic_helper.[c|h] -to drm_atomic_state_helper.[c|h]. - -During the connector reset, if that connector has a TV property, it needs -to be reset to the value provided on the command line. - -Provide a helper to do that. - -Reviewed-by: Noralf Trønnes -Signed-off-by: Maxime Ripard -Link: https://patchwork.freedesktop.org/patch/msgid/84a7b657f09303a2850e1cc79e68f623547f3fdd.1560783090.git-series.maxime.ripard@bootlin.com ---- - drivers/gpu/drm/drm_atomic_helper.c | 18 ++++++++++++++++++ - include/drm/drm_atomic_helper.h | 1 + - 2 files changed, 19 insertions(+) - ---- a/drivers/gpu/drm/drm_atomic_helper.c -+++ b/drivers/gpu/drm/drm_atomic_helper.c -@@ -3737,6 +3737,24 @@ void drm_atomic_helper_connector_reset(s - EXPORT_SYMBOL(drm_atomic_helper_connector_reset); - - /** -+ * drm_atomic_helper_connector_tv_reset - Resets TV connector properties -+ * @connector: DRM connector -+ * -+ * Resets the TV-related properties attached to a connector. -+ */ -+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector) -+{ -+ struct drm_cmdline_mode *cmdline = &connector->cmdline_mode; -+ struct drm_connector_state *state = connector->state; -+ -+ state->tv.margins.left = cmdline->tv_margins.left; -+ state->tv.margins.right = cmdline->tv_margins.right; -+ state->tv.margins.top = cmdline->tv_margins.top; -+ state->tv.margins.bottom = cmdline->tv_margins.bottom; -+} -+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset); -+ -+/** - * __drm_atomic_helper_connector_duplicate_state - copy atomic connector state - * @connector: connector object - * @state: atomic connector state ---- a/include/drm/drm_atomic_helper.h -+++ b/include/drm/drm_atomic_helper.h -@@ -168,6 +168,7 @@ void drm_atomic_helper_plane_destroy_sta - void __drm_atomic_helper_connector_reset(struct drm_connector *connector, - struct drm_connector_state *conn_state); - void drm_atomic_helper_connector_reset(struct drm_connector *connector); -+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector); - void - __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector, - struct drm_connector_state *state); diff --git a/target/linux/brcm2708/patches-4.19/950-0739-drm-vc4-hdmi-Set-default-state-margin-at-reset.patch b/target/linux/brcm2708/patches-4.19/950-0739-drm-vc4-hdmi-Set-default-state-margin-at-reset.patch deleted file mode 100644 index 9ee07712f5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0739-drm-vc4-hdmi-Set-default-state-margin-at-reset.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 1adef5f9443f148db0817099504df0a7fb7350dd Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 19 Jun 2019 12:17:53 +0200 -Subject: [PATCH 739/806] drm/vc4: hdmi: Set default state margin at reset -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Now that the TV margins are properly parsed and filled into -drm_cmdline_mode, we just need to initialise the first state at reset to -get those values and start using them. - -Acked-by: Eric Anholt -Reviewed-by: Noralf Trønnes -Signed-off-by: Maxime Ripard -Link: https://patchwork.freedesktop.org/patch/msgid/44e24172e300be6a41578517021ef6a6e90ed682.1560783090.git-series.maxime.ripard@bootlin.com ---- - drivers/gpu/drm/vc4/vc4_hdmi.c | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_hdmi.c -+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -292,11 +292,17 @@ static int vc4_hdmi_connector_get_modes( - return ret; - } - -+static void vc4_hdmi_connector_reset(struct drm_connector *connector) -+{ -+ drm_atomic_helper_connector_reset(connector); -+ drm_atomic_helper_connector_tv_reset(connector); -+} -+ - static const struct drm_connector_funcs vc4_hdmi_connector_funcs = { - .detect = vc4_hdmi_connector_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = vc4_hdmi_connector_destroy, -- .reset = drm_atomic_helper_connector_reset, -+ .reset = vc4_hdmi_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0740-drm-vc4-fkms-Set-default-state-margin-at-reset.patch b/target/linux/brcm2708/patches-4.19/950-0740-drm-vc4-fkms-Set-default-state-margin-at-reset.patch deleted file mode 100644 index 649f36c3ea..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0740-drm-vc4-fkms-Set-default-state-margin-at-reset.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2cf6bd979b0a5fdb179842308b1670691f6a2ce4 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 23 Jul 2019 11:09:26 +0100 -Subject: [PATCH 740/806] drm/vc4: fkms: Set default state margin at reset - -Now that the TV margins are properly parsed and filled into -drm_cmdline_mode, we just need to initialise the first state at reset to -get those values and start using them. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -1457,10 +1457,17 @@ int vc4_connector_atomic_set_property(st - return -EINVAL; - } - -+static void vc4_hdmi_connector_reset(struct drm_connector *connector) -+{ -+ drm_atomic_helper_connector_reset(connector); -+ drm_atomic_helper_connector_tv_reset(connector); -+} -+ - static const struct drm_connector_funcs vc4_fkms_connector_funcs = { - .detect = vc4_fkms_connector_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = vc4_fkms_connector_destroy, -+ .reset = vc4_hdmi_connector_reset, - .atomic_duplicate_state = vc4_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, - .atomic_get_property = vc4_connector_atomic_get_property, diff --git a/target/linux/brcm2708/patches-4.19/950-0741-drm-modes-Don-t-apply-cmdline-s-rotation-if-it-wasn-.patch b/target/linux/brcm2708/patches-4.19/950-0741-drm-modes-Don-t-apply-cmdline-s-rotation-if-it-wasn-.patch deleted file mode 100644 index b7691f1b35..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0741-drm-modes-Don-t-apply-cmdline-s-rotation-if-it-wasn-.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 6eb9a89c28590203658c0ebcbf29d5b41eb8596a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Tue, 23 Jul 2019 14:10:31 +0100 -Subject: [PATCH 741/806] drm/modes: Don't apply cmdline's rotation if it - wasn't specified - -Taken from the dri-devel mailing list (11/7/2019) to fixup the cmdline -parsing, but requires changes as things have moved between 4.19 and 5.2. - -From: Dmitry Osipenko - -The rotation mode from cmdline shouldn't be taken into account if it -wasn't specified in the cmdline. This fixes ignored default display -orientation when display mode is given using cmdline without the -rotation being specified. - -Fixes: 1bf4e09227c3 ("drm/modes: Allow to specify rotation and reflection on the commandline") -Signed-off-by: Dmitry Osipenko -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/drm_fb_helper.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/gpu/drm/drm_fb_helper.c -+++ b/drivers/gpu/drm/drm_fb_helper.c -@@ -2497,7 +2497,7 @@ static void drm_setup_crtc_rotation(stru - * simple XOR between the two handle the addition nicely. - */ - cmdline = &connector->cmdline_mode; -- if (cmdline->specified) { -+ if (cmdline->specified && cmdline->rotation_reflection) { - unsigned int cmdline_rest, panel_rest; - unsigned int cmdline_rot, panel_rot; - unsigned int sum_rot, sum_rest; diff --git a/target/linux/brcm2708/patches-4.19/950-0743-staging-bcm2835-codec-switch-to-multi-planar-API.patch b/target/linux/brcm2708/patches-4.19/950-0743-staging-bcm2835-codec-switch-to-multi-planar-API.patch deleted file mode 100644 index f45dd0bb79..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0743-staging-bcm2835-codec-switch-to-multi-planar-API.patch +++ /dev/null @@ -1,351 +0,0 @@ -From cb053a15c5c23e775647d6b65fef4c378bf34b5b Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Thu, 18 Jul 2019 17:07:05 +0800 -Subject: [PATCH 743/806] staging: bcm2835-codec: switch to multi-planar API - -There are two APIs for mem2mem devices, the older single-planar API and -the newer multi-planar one. Without making things overly complex, the -driver can only support one or the other. However the userspace libv4l2 -library has a plugin that allows multi-planar API devices to service -single-planar consumers. - -Chromium supports the multi-planar API exclusively, though this is -currently limited to ChromiumOS. It would be possible to add support -for generic Linux. - -Switching to the multi-planar API would allow usage of both APIs from -userspace. - -Signed-off-by: Chen-Yu Tsai ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 145 +++++++++--------- - 1 file changed, 76 insertions(+), 69 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -504,7 +504,7 @@ static struct bcm2835_codec_fmt *find_fo - - for (k = 0; k < fmts->num_entries; k++) { - fmt = &fmts->list[k]; -- if (fmt->fourcc == f->fmt.pix.pixelformat) -+ if (fmt->fourcc == f->fmt.pix_mp.pixelformat) - break; - } - if (k == fmts->num_entries) -@@ -522,9 +522,9 @@ static struct bcm2835_codec_q_data *get_ - enum v4l2_buf_type type) - { - switch (type) { -- case V4L2_BUF_TYPE_VIDEO_OUTPUT: -+ case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - return &ctx->q_data[V4L2_M2M_SRC]; -- case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: - return &ctx->q_data[V4L2_M2M_DST]; - default: - v4l2_err(&ctx->dev->v4l2_dev, "%s: Invalid queue type %u\n", -@@ -541,9 +541,9 @@ static struct vchiq_mmal_port *get_port_ - return NULL; - - switch (type) { -- case V4L2_BUF_TYPE_VIDEO_OUTPUT: -+ case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - return &ctx->component->input[0]; -- case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: - return &ctx->component->output[0]; - default: - v4l2_err(&ctx->dev->v4l2_dev, "%s: Invalid queue type %u\n", -@@ -752,7 +752,7 @@ static void handle_fmt_changed(struct bc - format->es.video.crop.width, format->es.video.crop.height, - format->es.video.color_space); - -- q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); -+ q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); - q_data->crop_width = format->es.video.crop.width; - q_data->crop_height = format->es.video.crop.height; - q_data->bytesperline = format->es.video.crop.width; -@@ -945,7 +945,7 @@ static int vidioc_querycap(struct file * - strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); - snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", - MEM2MEM_NAME); -- cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; -+ cap->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; - cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; - return 0; - } -@@ -996,16 +996,20 @@ static int vidioc_g_fmt(struct bcm2835_c - - q_data = get_q_data(ctx, f->type); - -- f->fmt.pix.width = q_data->crop_width; -- f->fmt.pix.height = q_data->height; -- f->fmt.pix.field = V4L2_FIELD_NONE; -- f->fmt.pix.pixelformat = q_data->fmt->fourcc; -- f->fmt.pix.bytesperline = q_data->bytesperline; -- f->fmt.pix.sizeimage = q_data->sizeimage; -- f->fmt.pix.colorspace = ctx->colorspace; -- f->fmt.pix.xfer_func = ctx->xfer_func; -- f->fmt.pix.ycbcr_enc = ctx->ycbcr_enc; -- f->fmt.pix.quantization = ctx->quant; -+ f->fmt.pix_mp.width = q_data->crop_width; -+ f->fmt.pix_mp.height = q_data->height; -+ f->fmt.pix_mp.pixelformat = q_data->fmt->fourcc; -+ f->fmt.pix_mp.field = V4L2_FIELD_NONE; -+ f->fmt.pix_mp.colorspace = ctx->colorspace; -+ f->fmt.pix_mp.plane_fmt[0].sizeimage = q_data->sizeimage; -+ f->fmt.pix_mp.plane_fmt[0].bytesperline = q_data->bytesperline; -+ f->fmt.pix_mp.num_planes = 1; -+ f->fmt.pix_mp.ycbcr_enc = ctx->ycbcr_enc; -+ f->fmt.pix_mp.quantization = ctx->quant; -+ f->fmt.pix_mp.xfer_func = ctx->xfer_func; -+ -+ memset(f->fmt.pix_mp.plane_fmt[0].reserved, 0, -+ sizeof(f->fmt.pix_mp.plane_fmt[0].reserved)); - - return 0; - } -@@ -1029,17 +1033,17 @@ static int vidioc_try_fmt(struct bcm2835 - * The V4L2 specification requires the driver to correct the format - * struct if any of the dimensions is unsupported - */ -- if (f->fmt.pix.width > MAX_W) -- f->fmt.pix.width = MAX_W; -- if (f->fmt.pix.height > MAX_H) -- f->fmt.pix.height = MAX_H; -+ if (f->fmt.pix_mp.width > MAX_W) -+ f->fmt.pix_mp.width = MAX_W; -+ if (f->fmt.pix_mp.height > MAX_H) -+ f->fmt.pix_mp.height = MAX_H; - - if (!fmt->flags & V4L2_FMT_FLAG_COMPRESSED) { - /* Only clip min w/h on capture. Treat 0x0 as unknown. */ -- if (f->fmt.pix.width < MIN_W) -- f->fmt.pix.width = MIN_W; -- if (f->fmt.pix.height < MIN_H) -- f->fmt.pix.height = MIN_H; -+ if (f->fmt.pix_mp.width < MIN_W) -+ f->fmt.pix_mp.width = MIN_W; -+ if (f->fmt.pix_mp.height < MIN_H) -+ f->fmt.pix_mp.height = MIN_H; - - /* - * For codecs the buffer must have a vertical alignment of 16 -@@ -1048,16 +1052,18 @@ static int vidioc_try_fmt(struct bcm2835 - * some of the pixels are active. - */ - if (ctx->dev->role != ISP) -- f->fmt.pix.height = ALIGN(f->fmt.pix.height, 16); -+ f->fmt.pix_mp.height = ALIGN(f->fmt.pix_mp.height, 16); - } -- f->fmt.pix.bytesperline = get_bytesperline(f->fmt.pix.width, -- fmt); -- f->fmt.pix.sizeimage = get_sizeimage(f->fmt.pix.bytesperline, -- f->fmt.pix.width, -- f->fmt.pix.height, -- fmt); -+ f->fmt.pix_mp.num_planes = 1; -+ f->fmt.pix_mp.plane_fmt[0].bytesperline = -+ get_bytesperline(f->fmt.pix_mp.width, fmt); -+ f->fmt.pix_mp.plane_fmt[0].sizeimage = -+ get_sizeimage(f->fmt.pix_mp.plane_fmt[0].bytesperline, -+ f->fmt.pix_mp.width, f->fmt.pix_mp.height, fmt); -+ memset(f->fmt.pix_mp.plane_fmt[0].reserved, 0, -+ sizeof(f->fmt.pix_mp.plane_fmt[0].reserved)); - -- f->fmt.pix.field = V4L2_FIELD_NONE; -+ f->fmt.pix_mp.field = V4L2_FIELD_NONE; - - return 0; - } -@@ -1070,8 +1076,8 @@ static int vidioc_try_fmt_vid_cap(struct - - fmt = find_format(f, ctx->dev, true); - if (!fmt) { -- f->fmt.pix.pixelformat = get_default_format(ctx->dev, -- true)->fourcc; -+ f->fmt.pix_mp.pixelformat = get_default_format(ctx->dev, -+ true)->fourcc; - fmt = find_format(f, ctx->dev, true); - } - -@@ -1086,13 +1092,13 @@ static int vidioc_try_fmt_vid_out(struct - - fmt = find_format(f, ctx->dev, false); - if (!fmt) { -- f->fmt.pix.pixelformat = get_default_format(ctx->dev, -- false)->fourcc; -+ f->fmt.pix_mp.pixelformat = get_default_format(ctx->dev, -+ false)->fourcc; - fmt = find_format(f, ctx->dev, false); - } - -- if (!f->fmt.pix.colorspace) -- f->fmt.pix.colorspace = ctx->colorspace; -+ if (!f->fmt.pix_mp.colorspace) -+ f->fmt.pix_mp.colorspace = ctx->colorspace; - - return vidioc_try_fmt(ctx, f, fmt); - } -@@ -1106,9 +1112,10 @@ static int vidioc_s_fmt(struct bcm2835_c - bool update_capture_port = false; - int ret; - -- v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", -- f->type, f->fmt.pix.width, f->fmt.pix.height, -- f->fmt.pix.pixelformat, f->fmt.pix.sizeimage); -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", -+ f->type, f->fmt.pix_mp.width, f->fmt.pix_mp.height, -+ f->fmt.pix_mp.pixelformat, f->fmt.pix_mp.plane_fmt[0].sizeimage); -+ - - vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); - if (!vq) -@@ -1124,9 +1131,9 @@ static int vidioc_s_fmt(struct bcm2835_c - } - - q_data->fmt = find_format(f, ctx->dev, -- f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE); -- q_data->crop_width = f->fmt.pix.width; -- q_data->height = f->fmt.pix.height; -+ f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); -+ q_data->crop_width = f->fmt.pix_mp.width; -+ q_data->height = f->fmt.pix_mp.height; - if (!q_data->selection_set) - q_data->crop_height = requested_height; - -@@ -1134,21 +1141,21 @@ static int vidioc_s_fmt(struct bcm2835_c - * Copying the behaviour of vicodec which retains a single set of - * colorspace parameters for both input and output. - */ -- ctx->colorspace = f->fmt.pix.colorspace; -- ctx->xfer_func = f->fmt.pix.xfer_func; -- ctx->ycbcr_enc = f->fmt.pix.ycbcr_enc; -- ctx->quant = f->fmt.pix.quantization; -+ ctx->colorspace = f->fmt.pix_mp.colorspace; -+ ctx->xfer_func = f->fmt.pix_mp.xfer_func; -+ ctx->ycbcr_enc = f->fmt.pix_mp.ycbcr_enc; -+ ctx->quant = f->fmt.pix_mp.quantization; - - /* All parameters should have been set correctly by try_fmt */ -- q_data->bytesperline = f->fmt.pix.bytesperline; -- q_data->sizeimage = f->fmt.pix.sizeimage; -+ q_data->bytesperline = f->fmt.pix_mp.plane_fmt[0].bytesperline; -+ q_data->sizeimage = f->fmt.pix_mp.plane_fmt[0].sizeimage; - - v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Calulated bpl as %u, size %u\n", - q_data->bytesperline, q_data->sizeimage); - - if (ctx->dev->role == DECODE && - q_data->fmt->flags & V4L2_FMT_FLAG_COMPRESSED && -- f->fmt.pix.width && f->fmt.pix.height) { -+ q_data->crop_width && q_data->height) { - /* - * On the decoder, if provided with a resolution on the input - * side, then replicate that to the output side. -@@ -1165,7 +1172,7 @@ static int vidioc_s_fmt(struct bcm2835_c - q_data_dst->height = ALIGN(q_data->crop_height, 16); - - q_data_dst->bytesperline = -- get_bytesperline(f->fmt.pix.width, q_data_dst->fmt); -+ get_bytesperline(f->fmt.pix_mp.width, q_data_dst->fmt); - q_data_dst->sizeimage = get_sizeimage(q_data_dst->bytesperline, - q_data_dst->crop_width, - q_data_dst->height, -@@ -1215,7 +1222,7 @@ static int vidioc_s_fmt(struct bcm2835_c - static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) - { -- unsigned int height = f->fmt.pix.height; -+ unsigned int height = f->fmt.pix_mp.height; - int ret; - - ret = vidioc_try_fmt_vid_cap(file, priv, f); -@@ -1228,7 +1235,7 @@ static int vidioc_s_fmt_vid_cap(struct f - static int vidioc_s_fmt_vid_out(struct file *file, void *priv, - struct v4l2_format *f) - { -- unsigned int height = f->fmt.pix.height; -+ unsigned int height = f->fmt.pix_mp.height; - int ret; - - ret = vidioc_try_fmt_vid_out(file, priv, f); -@@ -1244,7 +1251,7 @@ static int vidioc_g_selection(struct fil - { - struct bcm2835_codec_ctx *ctx = file2ctx(file); - struct bcm2835_codec_q_data *q_data; -- bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? -+ bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ? - true : false; - - if ((ctx->dev->role == DECODE && !capture_queue) || -@@ -1307,7 +1314,7 @@ static int vidioc_s_selection(struct fil - { - struct bcm2835_codec_ctx *ctx = file2ctx(file); - struct bcm2835_codec_q_data *q_data = NULL; -- bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? -+ bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ? - true : false; - - v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: ctx %p, type %d, q_data %p, target %d, rect x/y %d/%d, w/h %ux%u\n", -@@ -1368,7 +1375,7 @@ static int vidioc_s_parm(struct file *fi - { - struct bcm2835_codec_ctx *ctx = file2ctx(file); - -- if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) -+ if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) - return -EINVAL; - - ctx->framerate_num = -@@ -1738,15 +1745,15 @@ static int vidioc_encoder_cmd(struct fil - static const struct v4l2_ioctl_ops bcm2835_codec_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - -- .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, -- .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, -- .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, -- .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, -- -- .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, -- .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, -- .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, -- .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, -+ .vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap, -+ .vidioc_g_fmt_vid_cap_mplane = vidioc_g_fmt_vid_cap, -+ .vidioc_try_fmt_vid_cap_mplane = vidioc_try_fmt_vid_cap, -+ .vidioc_s_fmt_vid_cap_mplane = vidioc_s_fmt_vid_cap, -+ -+ .vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out, -+ .vidioc_g_fmt_vid_out_mplane = vidioc_g_fmt_vid_out, -+ .vidioc_try_fmt_vid_out_mplane = vidioc_try_fmt_vid_out, -+ .vidioc_s_fmt_vid_out_mplane = vidioc_s_fmt_vid_out, - - .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, - .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, -@@ -2089,7 +2096,7 @@ static int bcm2835_codec_start_streaming - ctx->component_enabled = true; - } - -- if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { -+ if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { - /* - * Create the EOS buffer. - * We only need the MMAL part, and want to NOT attach a memory -@@ -2216,7 +2223,7 @@ static int queue_init(void *priv, struct - struct bcm2835_codec_ctx *ctx = priv; - int ret; - -- src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; -+ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; - src_vq->io_modes = VB2_MMAP | VB2_DMABUF; - src_vq->drv_priv = ctx; - src_vq->buf_struct_size = sizeof(struct m2m_mmal_buffer); -@@ -2230,7 +2237,7 @@ static int queue_init(void *priv, struct - if (ret) - return ret; - -- dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; -+ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; - dst_vq->io_modes = VB2_MMAP | VB2_DMABUF; - dst_vq->drv_priv = ctx; - dst_vq->buf_struct_size = sizeof(struct m2m_mmal_buffer); diff --git a/target/linux/brcm2708/patches-4.19/950-0744-staging-bcm2835-codec-implement-V4L2_CID_MIN_BUFFERS.patch b/target/linux/brcm2708/patches-4.19/950-0744-staging-bcm2835-codec-implement-V4L2_CID_MIN_BUFFERS.patch deleted file mode 100644 index 372d17a812..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0744-staging-bcm2835-codec-implement-V4L2_CID_MIN_BUFFERS.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 1f524b04b040978e2d96380ff40c3e80feba49a5 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 22 Jul 2019 22:13:30 +0800 -Subject: [PATCH 744/806] staging: bcm2835-codec: implement - V4L2_CID_MIN_BUFFERS_FOR_CAPTURE - -The stateful decoder specification shows an optional step for retrieving -the miminum number of capture buffers required for the decoder to -proceed. While not a required parameter, having it makes some -applications happy. - -bcm2835-codec is a little different from other decoder implementations -in that there is an intermediate format conversion between the hardware -and V4L2 buffers. The number of capture buffers required is therefore -independent of the stream and DPB etc. - -There are plans to remove the conversion, but it requires a fair amount -of rework within the firmware. Until that is done, simply return a value -of 1. - -Signed-off-by: Chen-Yu Tsai ---- - .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -2357,6 +2357,18 @@ static int bcm2835_codec_open(struct fil - } - ctx->fh.ctrl_handler = hdl; - v4l2_ctrl_handler_setup(hdl); -+ } else if (dev->role == DECODE) { -+ v4l2_ctrl_handler_init(hdl, 1); -+ -+ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, -+ V4L2_CID_MIN_BUFFERS_FOR_CAPTURE, -+ 1, 1, 1, 1); -+ if (hdl->error) { -+ rc = hdl->error; -+ goto free_ctrl_handler; -+ } -+ ctx->fh.ctrl_handler = hdl; -+ v4l2_ctrl_handler_setup(hdl); - } - - ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); diff --git a/target/linux/brcm2708/patches-4.19/950-0745-staging-bcm2835-codec-set-device_caps-in-struct-vide.patch b/target/linux/brcm2708/patches-4.19/950-0745-staging-bcm2835-codec-set-device_caps-in-struct-vide.patch deleted file mode 100644 index a5202e826f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0745-staging-bcm2835-codec-set-device_caps-in-struct-vide.patch +++ /dev/null @@ -1,40 +0,0 @@ -From c369e173f9ff254ed3c3b9062e04917122e3536e Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 22 Jul 2019 22:20:55 +0800 -Subject: [PATCH 745/806] staging: bcm2835-codec: set device_caps in struct - video_device - -Instead of filling in the struct v4l2_capability device_caps -field, fill in the struct video_device device_caps field. - -That way the V4L2 core knows what the capabilities of the -video device are. - -This is similar to a cleanup series by Hans Verkuil [1]. - -[1] https://www.spinics.net/lists/linux-media/msg153313.html - -Signed-off-by: Chen-Yu Tsai ---- - .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -945,8 +945,6 @@ static int vidioc_querycap(struct file * - strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); - snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", - MEM2MEM_NAME); -- cap->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; -- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; - return 0; - } - -@@ -2600,6 +2598,7 @@ static int bcm2835_codec_create(struct p - vfd = &dev->vfd; - vfd->lock = &dev->dev_mutex; - vfd->v4l2_dev = &dev->v4l2_dev; -+ vfd->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; - - switch (role) { - case DECODE: diff --git a/target/linux/brcm2708/patches-4.19/950-0746-Add-HDMI1-facility-to-the-driver.patch b/target/linux/brcm2708/patches-4.19/950-0746-Add-HDMI1-facility-to-the-driver.patch deleted file mode 100644 index eaa6318d3d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0746-Add-HDMI1-facility-to-the-driver.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 0a37470a112260ef1c9a016a400fdf1f8792eadc Mon Sep 17 00:00:00 2001 -From: James Hughes -Date: Tue, 16 Jul 2019 12:18:21 +0100 -Subject: [PATCH 746/806] Add HDMI1 facility to the driver. - -For generic ALSA, all you need is the bcm2835.h change, but -have also added structures for IEC958 HDMI. Not sure how to -test those. ---- - .../vc04_services/bcm2835-audio/bcm2835.c | 29 ++++++++++++++++--- - .../vc04_services/bcm2835-audio/bcm2835.h | 4 ++- - 2 files changed, 28 insertions(+), 5 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c -@@ -79,7 +79,11 @@ static int bcm2835_audio_alsa_newpcm(str - if (err) - return err; - -- err = snd_bcm2835_new_pcm(chip, "bcm2835 IEC958/HDMI", 1, 0, 1, true); -+ err = snd_bcm2835_new_pcm(chip, "bcm2835 IEC958/HDMI", 1, AUDIO_DEST_HDMI0, 1, true); -+ if (err) -+ return err; -+ -+ err = snd_bcm2835_new_pcm(chip, "bcm2835 IEC958/HDMI1", 2, AUDIO_DEST_HDMI1, 1, true); - if (err) - return err; - -@@ -106,7 +110,7 @@ static struct bcm2835_audio_driver bcm28 - .newctl = snd_bcm2835_new_ctl, - }; - --static struct bcm2835_audio_driver bcm2835_audio_hdmi = { -+static struct bcm2835_audio_driver bcm2835_audio_hdmi0 = { - .driver = { - .name = "bcm2835_hdmi", - .owner = THIS_MODULE, -@@ -116,7 +120,20 @@ static struct bcm2835_audio_driver bcm28 - .minchannels = 1, - .newpcm = bcm2835_audio_simple_newpcm, - .newctl = snd_bcm2835_new_hdmi_ctl, -- .route = AUDIO_DEST_HDMI -+ .route = AUDIO_DEST_HDMI0 -+}; -+ -+static struct bcm2835_audio_driver bcm2835_audio_hdmi1 = { -+ .driver = { -+ .name = "bcm2835_hdmi", -+ .owner = THIS_MODULE, -+ }, -+ .shortname = "bcm2835 HDMI 1", -+ .longname = "bcm2835 HDMI 1", -+ .minchannels = 1, -+ .newpcm = bcm2835_audio_simple_newpcm, -+ .newctl = snd_bcm2835_new_hdmi_ctl, -+ .route = AUDIO_DEST_HDMI1 - }; - - static struct bcm2835_audio_driver bcm2835_audio_headphones = { -@@ -143,7 +160,11 @@ static struct bcm2835_audio_drivers chil - .is_enabled = &enable_compat_alsa, - }, - { -- .audio_driver = &bcm2835_audio_hdmi, -+ .audio_driver = &bcm2835_audio_hdmi0, -+ .is_enabled = &enable_hdmi, -+ }, -+ { -+ .audio_driver = &bcm2835_audio_hdmi1, - .is_enabled = &enable_hdmi, - }, - { ---- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h -@@ -33,7 +33,9 @@ enum { - enum snd_bcm2835_route { - AUDIO_DEST_AUTO = 0, - AUDIO_DEST_HEADPHONES = 1, -- AUDIO_DEST_HDMI = 2, -+ AUDIO_DEST_HDMI = 2, // for backwards compatibility. -+ AUDIO_DEST_HDMI0 = 2, -+ AUDIO_DEST_HDMI1 = 3, - AUDIO_DEST_MAX, - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0747-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch b/target/linux/brcm2708/patches-4.19/950-0747-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch deleted file mode 100644 index 6d8a803524..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0747-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch +++ /dev/null @@ -1,194 +0,0 @@ -From 114845b6010b6e6a320804f2d86ab4d5dc5a06de Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 5 Aug 2019 14:17:14 +0100 -Subject: [PATCH 747/806] overlays: Add baudrate parameter to i2c3-i2c6 - -The overlays for enabling the new BCM2711 I2C interfaces were lacking -the means to configure the baud/clock rate. - -Also explictly set the default pins, rather than relying on the values -in the base DTB. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 8 ++++++++ - arch/arm/boot/dts/overlays/i2c3-overlay.dts | 15 ++++++++++++--- - arch/arm/boot/dts/overlays/i2c4-overlay.dts | 15 ++++++++++++--- - arch/arm/boot/dts/overlays/i2c5-overlay.dts | 15 ++++++++++++--- - arch/arm/boot/dts/overlays/i2c6-overlay.dts | 15 ++++++++++++--- - 5 files changed, 56 insertions(+), 12 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1221,6 +1221,8 @@ Info: Enable the i2c3 bus - Load: dtoverlay=i2c3, - Params: pins_2_3 Use GPIOs 2 and 3 - pins_4_5 Use GPIOs 4 and 5 (default) -+ baudrate Set the baudrate for the interface (default -+ "100000") - - - Name: i2c4 -@@ -1228,6 +1230,8 @@ Info: Enable the i2c4 bus - Load: dtoverlay=i2c4, - Params: pins_6_7 Use GPIOs 6 and 7 - pins_8_9 Use GPIOs 8 and 9 (default) -+ baudrate Set the baudrate for the interface (default -+ "100000") - - - Name: i2c5 -@@ -1235,6 +1239,8 @@ Info: Enable the i2c5 bus - Load: dtoverlay=i2c5, - Params: pins_10_11 Use GPIOs 10 and 11 - pins_12_13 Use GPIOs 12 and 13 (default) -+ baudrate Set the baudrate for the interface (default -+ "100000") - - - Name: i2c6 -@@ -1242,6 +1248,8 @@ Info: Enable the i2c6 bus - Load: dtoverlay=i2c6, - Params: pins_0_1 Use GPIOs 0 and 1 - pins_22_23 Use GPIOs 22 and 23 (default) -+ baudrate Set the baudrate for the interface (default -+ "100000") - - - Name: i2s-gpio28-31 ---- a/arch/arm/boot/dts/overlays/i2c3-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c3-overlay.dts -@@ -6,10 +6,11 @@ - - fragment@0 { - target = <&i2c3>; -- __overlay__ { -+ frag0: __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; -+ clock-frequency = <100000>; - }; - }; - -@@ -20,8 +21,16 @@ - }; - }; - -+ fragment@2 { -+ target = <&i2c3_pins>; -+ __overlay__ { -+ brcm,pins = <4 5>; -+ }; -+ }; -+ - __overrides__ { -- pins_2_3 = <0>,"=1"; -- pins_4_5 = <0>,"!1"; -+ pins_2_3 = <0>,"=1!2"; -+ pins_4_5 = <0>,"!1=2"; -+ baudrate = <&frag0>, "clock-frequency:0"; - }; - }; ---- a/arch/arm/boot/dts/overlays/i2c4-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c4-overlay.dts -@@ -6,10 +6,11 @@ - - fragment@0 { - target = <&i2c4>; -- __overlay__ { -+ frag0: __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins>; -+ clock-frequency = <100000>; - }; - }; - -@@ -20,8 +21,16 @@ - }; - }; - -+ fragment@2 { -+ target = <&i2c4_pins>; -+ __overlay__ { -+ brcm,pins = <8 9>; -+ }; -+ }; -+ - __overrides__ { -- pins_6_7 = <0>,"=1"; -- pins_8_9 = <0>,"!1"; -+ pins_6_7 = <0>,"=1!2"; -+ pins_8_9 = <0>,"!1=2"; -+ baudrate = <&frag0>, "clock-frequency:0"; - }; - }; ---- a/arch/arm/boot/dts/overlays/i2c5-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c5-overlay.dts -@@ -6,10 +6,11 @@ - - fragment@0 { - target = <&i2c5>; -- __overlay__ { -+ frag0: __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; -+ clock-frequency = <100000>; - }; - }; - -@@ -20,8 +21,16 @@ - }; - }; - -+ fragment@2 { -+ target = <&i2c5_pins>; -+ __overlay__ { -+ brcm,pins = <12 13>; -+ }; -+ }; -+ - __overrides__ { -- pins_10_11 = <0>,"=1"; -- pins_12_13 = <0>,"!1"; -+ pins_10_11 = <0>,"=1!2"; -+ pins_12_13 = <0>,"!1=2"; -+ baudrate = <&frag0>, "clock-frequency:0"; - }; - }; ---- a/arch/arm/boot/dts/overlays/i2c6-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c6-overlay.dts -@@ -6,10 +6,11 @@ - - fragment@0 { - target = <&i2c6>; -- __overlay__ { -+ frag0: __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; -+ clock-frequency = <100000>; - }; - }; - -@@ -20,8 +21,16 @@ - }; - }; - -+ fragment@2 { -+ target = <&i2c6_pins>; -+ __overlay__ { -+ brcm,pins = <22 23>; -+ }; -+ }; -+ - __overrides__ { -- pins_0_1 = <0>,"=1"; -- pins_22_23 = <0>,"!1"; -+ pins_0_1 = <0>,"=1!2"; -+ pins_22_23 = <0>,"!1=2"; -+ baudrate = <&frag0>, "clock-frequency:0"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0749-drm-vc4-Resolve-the-vblank-warnings-on-mode-switchin.patch b/target/linux/brcm2708/patches-4.19/950-0749-drm-vc4-Resolve-the-vblank-warnings-on-mode-switchin.patch deleted file mode 100644 index a80cfba3e4..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0749-drm-vc4-Resolve-the-vblank-warnings-on-mode-switchin.patch +++ /dev/null @@ -1,100 +0,0 @@ -From df276f0a5aa865c7926d9d148605d1a59d1d4fbb Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 25 Jul 2019 17:27:44 +0100 -Subject: [PATCH 749/806] drm/vc4: Resolve the vblank warnings on mode - switching - -The details over when and how a driver is to service the -vblank events are sketchy, and the fkms driver was triggering -a kernel warning every time the crtc was enabled or disabled. - -Copy the event handling as used by the vc4-kms driver slightly -more closely, and we avoid the warnings. - -https://github.com/raspberrypi/linux/issues/3020 - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 48 ++++++++++++++++++-------- - 1 file changed, 33 insertions(+), 15 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -933,6 +933,7 @@ static void vc4_crtc_mode_set_nofb(struc - - static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) - { -+ struct drm_device *dev = crtc->dev; - struct drm_plane *plane; - - DRM_DEBUG_KMS("[CRTC:%d] vblanks off.\n", -@@ -948,6 +949,35 @@ static void vc4_crtc_disable(struct drm_ - - drm_atomic_crtc_for_each_plane(plane, crtc) - vc4_plane_atomic_disable(plane, plane->state); -+ -+ /* -+ * Make sure we issue a vblank event after disabling the CRTC if -+ * someone was waiting it. -+ */ -+ if (crtc->state->event) { -+ unsigned long flags; -+ -+ spin_lock_irqsave(&dev->event_lock, flags); -+ drm_crtc_send_vblank_event(crtc, crtc->state->event); -+ crtc->state->event = NULL; -+ spin_unlock_irqrestore(&dev->event_lock, flags); -+ } -+} -+ -+static void vc4_crtc_consume_event(struct drm_crtc *crtc) -+{ -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ struct drm_device *dev = crtc->dev; -+ unsigned long flags; -+ -+ crtc->state->event->pipe = drm_crtc_index(crtc); -+ -+ WARN_ON(drm_crtc_vblank_get(crtc) != 0); -+ -+ spin_lock_irqsave(&dev->event_lock, flags); -+ vc4_crtc->event = crtc->state->event; -+ crtc->state->event = NULL; -+ spin_unlock_irqrestore(&dev->event_lock, flags); - } - - static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) -@@ -957,6 +987,7 @@ static void vc4_crtc_enable(struct drm_c - DRM_DEBUG_KMS("[CRTC:%d] vblanks on.\n", - crtc->base.id); - drm_crtc_vblank_on(crtc); -+ vc4_crtc_consume_event(crtc); - - /* Unblank the planes (if they're supposed to be displayed). */ - drm_atomic_crtc_for_each_plane(plane, crtc) -@@ -1028,23 +1059,10 @@ static int vc4_crtc_atomic_check(struct - static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state) - { -- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -- struct drm_device *dev = crtc->dev; -- - DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_flush.\n", - crtc->base.id); -- if (crtc->state->event) { -- unsigned long flags; -- -- crtc->state->event->pipe = drm_crtc_index(crtc); -- -- WARN_ON(drm_crtc_vblank_get(crtc) != 0); -- -- spin_lock_irqsave(&dev->event_lock, flags); -- vc4_crtc->event = crtc->state->event; -- crtc->state->event = NULL; -- spin_unlock_irqrestore(&dev->event_lock, flags); -- } -+ if (crtc->state->active && old_state->active && crtc->state->event) -+ vc4_crtc_consume_event(crtc); - } - - static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) diff --git a/target/linux/brcm2708/patches-4.19/950-0750-drm-vc4-Remove-unused-mode-variable.patch b/target/linux/brcm2708/patches-4.19/950-0750-drm-vc4-Remove-unused-mode-variable.patch deleted file mode 100644 index af6109b511..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0750-drm-vc4-Remove-unused-mode-variable.patch +++ /dev/null @@ -1,27 +0,0 @@ -From b2f463facb358b917380683b5e86c5d1cb3db123 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 25 Jul 2019 17:34:29 +0100 -Subject: [PATCH 750/806] drm/vc4: Remove unused mode variable - -"89d1376 drm/vc4: Add support for margins to fkms" removed -the requirement for having the mode structure from vc4_plane_to_mb, -but didn't remove it as a local to the function, causing a -compiler warning. - -Remove the unused variable. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -523,7 +523,6 @@ static int vc4_plane_to_mb(struct drm_pl - const struct vc_image_format *vc_fmt = - vc4_get_vc_image_fmt(drm_fmt->format); - int num_planes = fb->format->num_planes; -- struct drm_display_mode *mode = &state->crtc->mode; - unsigned int rotation = SUPPORTED_ROTATIONS; - - mb->plane.vc_image_type = vc_fmt->vc_image; diff --git a/target/linux/brcm2708/patches-4.19/950-0751-staging-bcm2835-codec-Expand-logging-on-format-setti.patch b/target/linux/brcm2708/patches-4.19/950-0751-staging-bcm2835-codec-Expand-logging-on-format-setti.patch deleted file mode 100644 index d36226a6b7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0751-staging-bcm2835-codec-Expand-logging-on-format-setti.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 9a9ef8123467579c431ced1e98827364d66c615f Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 11 Jul 2019 14:57:09 +0100 -Subject: [PATCH 751/806] staging:bcm2835-codec: Expand logging on format - setting - -Adds some more useful logging during format changed events and -s_fmt. - -Reported by: zillevdr -Signed-off-by: Dave Stevenson ---- - .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 10 +++++++--- - 1 file changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -753,6 +753,10 @@ static void handle_fmt_changed(struct bc - format->es.video.color_space); - - q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: Format was %ux%u, crop %ux%u\n", -+ __func__, q_data->bytesperline, q_data->height, -+ q_data->crop_width, q_data->crop_height); -+ - q_data->crop_width = format->es.video.crop.width; - q_data->crop_height = format->es.video.crop.height; - q_data->bytesperline = format->es.video.crop.width; -@@ -1110,10 +1114,10 @@ static int vidioc_s_fmt(struct bcm2835_c - bool update_capture_port = false; - int ret; - -- v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: %08x, size %u\n", -+ v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "Setting format for type %d, wxh: %dx%d, fmt: " V4L2_FOURCC_CONV ", size %u\n", - f->type, f->fmt.pix_mp.width, f->fmt.pix_mp.height, -- f->fmt.pix_mp.pixelformat, f->fmt.pix_mp.plane_fmt[0].sizeimage); -- -+ V4L2_FOURCC_CONV_ARGS(f->fmt.pix_mp.pixelformat), -+ f->fmt.pix_mp.plane_fmt[0].sizeimage); - - vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); - if (!vq) diff --git a/target/linux/brcm2708/patches-4.19/950-0752-staging-bcm2835-codec-Correct-bytesperline-on-format.patch b/target/linux/brcm2708/patches-4.19/950-0752-staging-bcm2835-codec-Correct-bytesperline-on-format.patch deleted file mode 100644 index 9625f9604d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0752-staging-bcm2835-codec-Correct-bytesperline-on-format.patch +++ /dev/null @@ -1,30 +0,0 @@ -From bcb6e267ca61ce685ed2debc0cee327527cea20d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 11 Jul 2019 14:58:35 +0100 -Subject: [PATCH 752/806] staging: bcm2835-codec: Correct bytesperline on - format changed - -The handling of format changed events incorrectly set bytesperline -to the cropped width, which ignored padding and formats with -more than 8bpp. -Fix these. - -Reported by: zillevdr -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -759,7 +759,9 @@ static void handle_fmt_changed(struct bc - - q_data->crop_width = format->es.video.crop.width; - q_data->crop_height = format->es.video.crop.height; -- q_data->bytesperline = format->es.video.crop.width; -+ q_data->bytesperline = get_bytesperline(format->es.video.width, -+ q_data->fmt); -+ - q_data->height = format->es.video.height; - q_data->sizeimage = format->buffer_size_min; - if (format->es.video.color_space) diff --git a/target/linux/brcm2708/patches-4.19/950-0753-drm-vc4-Add-missing-NULL-check-to-vc4_crtc_consume_e.patch b/target/linux/brcm2708/patches-4.19/950-0753-drm-vc4-Add-missing-NULL-check-to-vc4_crtc_consume_e.patch deleted file mode 100644 index 8d4effacdb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0753-drm-vc4-Add-missing-NULL-check-to-vc4_crtc_consume_e.patch +++ /dev/null @@ -1,28 +0,0 @@ -From cbe5c2a67fb145b210652be20a84690e09e4eb25 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 7 Aug 2019 11:31:08 +0100 -Subject: [PATCH 753/806] drm/vc4: Add missing NULL check to - vc4_crtc_consume_event - -vc4_crtc_consume_event wasn't checking crtc->state->event was -set before dereferencing it, leading to an OOPS. - -Fixes "a5b534b drm/vc4: Resolve the vblank warnings on mode switching" - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -969,6 +969,9 @@ static void vc4_crtc_consume_event(struc - struct drm_device *dev = crtc->dev; - unsigned long flags; - -+ if (!crtc->state->event) -+ return; -+ - crtc->state->event->pipe = drm_crtc_index(crtc); - - WARN_ON(drm_crtc_vblank_get(crtc) != 0); diff --git a/target/linux/brcm2708/patches-4.19/950-0755-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch b/target/linux/brcm2708/patches-4.19/950-0755-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch deleted file mode 100644 index fbce45ed20..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0755-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 103afc4641ab8d6587e981a5e3fda27427a8bf4b Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 9 Aug 2019 08:51:43 +0100 -Subject: [PATCH 755/806] net: bcmgenet: Workaround #2 for Pi4 Ethernet fail - -Some combinations of Pi 4Bs and Ethernet switches don't reliably get a -DCHP-assigned IP address, leaving the unit with a self=assigned 169.254 -address. In the failure case, the Pi is left able to receive packets -but not send them, suggesting that the MAC<->PHY link is getting into -a bad state. - -It has been found empirically that skipping a reset step by the genet -driver prevents the failures. No downsides have been discovered yet, -and unlike the forced renegotiation it doesn't increase the time to -get an IP address, so the workaround is enabled by default; add - - genet.skip_umac_reset=n - -to the command line to disable it. - -See: https://github.com/raspberrypi/linux/issues/3108 - -Signed-off-by: Phil Elwell ---- - drivers/net/ethernet/broadcom/genet/bcmgenet.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c -+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c -@@ -72,6 +72,10 @@ - #define GENET_RDMA_REG_OFF (priv->hw_params->rdma_offset + \ - TOTAL_DESC * DMA_DESC_SIZE) - -+static bool skip_umac_reset = true; -+module_param(skip_umac_reset, bool, 0444); -+MODULE_PARM_DESC(skip_umac_reset, "Skip UMAC reset step"); -+ - static inline void bcmgenet_writel(u32 value, void __iomem *offset) - { - /* MIPS chips strapped for BE will automagically configure the -@@ -1993,6 +1997,11 @@ static void reset_umac(struct bcmgenet_p - bcmgenet_rbuf_ctrl_set(priv, 0); - udelay(10); - -+ if (skip_umac_reset) { -+ pr_warn("Skipping UMAC reset\n"); -+ return; -+ } -+ - /* disable MAC while updating its registers */ - bcmgenet_umac_writel(priv, 0, UMAC_CMD); - diff --git a/target/linux/brcm2708/patches-4.19/950-0756-drm-vc4-Fix-TILE_Y_OFFSET-definitions.patch b/target/linux/brcm2708/patches-4.19/950-0756-drm-vc4-Fix-TILE_Y_OFFSET-definitions.patch deleted file mode 100644 index 5854d1f51f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0756-drm-vc4-Fix-TILE_Y_OFFSET-definitions.patch +++ /dev/null @@ -1,27 +0,0 @@ -From c1fffc2a7dbf7e59aaef36378fb14d1c3dc016a6 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 3 Aug 2018 11:22:27 +0200 -Subject: [PATCH 756/806] drm/vc4: Fix TILE_Y_OFFSET definitions - -Y_OFFSET field starts at bit 8 not 7. - -Signed-off-by: Eric Anholt -Signed-off-by: Boris Brezillon -Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-1-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/vc4/vc4_regs.h | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_regs.h -+++ b/drivers/gpu/drm/vc4/vc4_regs.h -@@ -1043,8 +1043,8 @@ enum hvs_pixel_format { - #define SCALER_PITCH0_TILE_LINE_DIR BIT(15) - #define SCALER_PITCH0_TILE_INITIAL_LINE_DIR BIT(14) - /* Y offset within a tile. */ --#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 7) --#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 7 -+#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 8) -+#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 8 - #define SCALER_PITCH0_TILE_WIDTH_R_MASK VC4_MASK(6, 0) - #define SCALER_PITCH0_TILE_WIDTH_R_SHIFT 0 - diff --git a/target/linux/brcm2708/patches-4.19/950-0757-drm-vc4-Define-missing-PITCH0_SINK_PIX-field.patch b/target/linux/brcm2708/patches-4.19/950-0757-drm-vc4-Define-missing-PITCH0_SINK_PIX-field.patch deleted file mode 100644 index 34eb57c4d2..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0757-drm-vc4-Define-missing-PITCH0_SINK_PIX-field.patch +++ /dev/null @@ -1,28 +0,0 @@ -From d0b90f9c68a96f2bee66d796cb33367d205e586a Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 3 Aug 2018 11:22:28 +0200 -Subject: [PATCH 757/806] drm/vc4: Define missing PITCH0_SINK_PIX field - -This is needed to support X/Y negative placement of planes using -T-format buffers. - -Signed-off-by: Eric Anholt -Signed-off-by: Boris Brezillon -Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-2-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/vc4/vc4_regs.h | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_regs.h -+++ b/drivers/gpu/drm/vc4/vc4_regs.h -@@ -1037,6 +1037,10 @@ enum hvs_pixel_format { - #define SCALER_TILE_HEIGHT_MASK VC4_MASK(15, 0) - #define SCALER_TILE_HEIGHT_SHIFT 0 - -+/* Common PITCH0 fields */ -+#define SCALER_PITCH0_SINK_PIX_MASK VC4_MASK(31, 26) -+#define SCALER_PITCH0_SINK_PIX_SHIFT 26 -+ - /* PITCH0 fields for T-tiled. */ - #define SCALER_PITCH0_TILE_WIDTH_L_MASK VC4_MASK(22, 16) - #define SCALER_PITCH0_TILE_WIDTH_L_SHIFT 16 diff --git a/target/linux/brcm2708/patches-4.19/950-0758-drm-vc4-Use-drm_atomic_helper_check_plane_state-to-s.patch b/target/linux/brcm2708/patches-4.19/950-0758-drm-vc4-Use-drm_atomic_helper_check_plane_state-to-s.patch deleted file mode 100644 index fa0fa6b208..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0758-drm-vc4-Use-drm_atomic_helper_check_plane_state-to-s.patch +++ /dev/null @@ -1,157 +0,0 @@ -From 2a98dc34696c6510a49a684eb56d3a9c2a150571 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Fri, 3 Aug 2018 11:22:29 +0200 -Subject: [PATCH 758/806] drm/vc4: Use drm_atomic_helper_check_plane_state() to - simplify the logic - -drm_atomic_helper_check_plane_state() takes care of checking the -scaling capabilities and calculating the clipped X/Y offsets for us. - -Rely on this function instead of open-coding the logic. - -Incidentally, it seems to fix a problem we had with negative X/Y -positioning of YUV planes. - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-3-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/vc4/vc4_plane.c | 103 ++++++++++++++++---------------- - 1 file changed, 52 insertions(+), 51 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_plane.c -+++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -313,31 +313,59 @@ static int vc4_plane_setup_clipping_and_ - u32 subpixel_src_mask = (1 << 16) - 1; - u32 format = fb->format->format; - int num_planes = fb->format->num_planes; -- u32 h_subsample = 1; -- u32 v_subsample = 1; -- int ret; -- int i; -+ int min_scale = 1, max_scale = INT_MAX; -+ struct drm_crtc_state *crtc_state; -+ u32 h_subsample, v_subsample; -+ int i, ret; -+ -+ crtc_state = drm_atomic_get_existing_crtc_state(state->state, -+ state->crtc); -+ if (!crtc_state) { -+ DRM_DEBUG_KMS("Invalid crtc state\n"); -+ return -EINVAL; -+ } -+ -+ /* No configuring scaling on the cursor plane, since it gets -+ * non-vblank-synced updates, and scaling requires LBM changes which -+ * have to be vblank-synced. -+ */ -+ if (plane->type == DRM_PLANE_TYPE_CURSOR) { -+ min_scale = DRM_PLANE_HELPER_NO_SCALING; -+ max_scale = DRM_PLANE_HELPER_NO_SCALING; -+ } else { -+ min_scale = 1; -+ max_scale = INT_MAX; -+ } -+ -+ ret = drm_atomic_helper_check_plane_state(state, crtc_state, -+ min_scale, max_scale, -+ true, true); -+ if (ret) -+ return ret; -+ -+ h_subsample = drm_format_horz_chroma_subsampling(format); -+ v_subsample = drm_format_vert_chroma_subsampling(format); - - for (i = 0; i < num_planes; i++) - vc4_state->offsets[i] = bo->paddr + fb->offsets[i]; - - /* We don't support subpixel source positioning for scaling. */ -- if ((state->src_x & subpixel_src_mask) || -- (state->src_y & subpixel_src_mask) || -- (state->src_w & subpixel_src_mask) || -- (state->src_h & subpixel_src_mask)) { -+ if ((state->src.x1 & subpixel_src_mask) || -+ (state->src.x2 & subpixel_src_mask) || -+ (state->src.y1 & subpixel_src_mask) || -+ (state->src.y2 & subpixel_src_mask)) { - return -EINVAL; - } - -- vc4_state->src_x = state->src_x >> 16; -- vc4_state->src_y = state->src_y >> 16; -- vc4_state->src_w[0] = state->src_w >> 16; -- vc4_state->src_h[0] = state->src_h >> 16; -- -- vc4_state->crtc_x = state->crtc_x; -- vc4_state->crtc_y = state->crtc_y; -- vc4_state->crtc_w = state->crtc_w; -- vc4_state->crtc_h = state->crtc_h; -+ vc4_state->src_x = state->src.x1 >> 16; -+ vc4_state->src_y = state->src.y1 >> 16; -+ vc4_state->src_w[0] = (state->src.x2 - state->src.x1) >> 16; -+ vc4_state->src_h[0] = (state->src.y2 - state->src.y1) >> 16; -+ -+ vc4_state->crtc_x = state->dst.x1; -+ vc4_state->crtc_y = state->dst.y1; -+ vc4_state->crtc_w = state->dst.x2 - state->dst.x1; -+ vc4_state->crtc_h = state->dst.y2 - state->dst.y1; - - ret = vc4_plane_margins_adj(state); - if (ret) -@@ -354,8 +382,6 @@ static int vc4_plane_setup_clipping_and_ - if (num_planes > 1) { - vc4_state->is_yuv = true; - -- h_subsample = drm_format_horz_chroma_subsampling(format); -- v_subsample = drm_format_vert_chroma_subsampling(format); - vc4_state->src_w[1] = vc4_state->src_w[0] / h_subsample; - vc4_state->src_h[1] = vc4_state->src_h[0] / v_subsample; - -@@ -380,39 +406,14 @@ static int vc4_plane_setup_clipping_and_ - vc4_state->y_scaling[1] = VC4_SCALING_NONE; - } - -- /* No configuring scaling on the cursor plane, since it gets -- non-vblank-synced updates, and scaling requires requires -- LBM changes which have to be vblank-synced. -- */ -- if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity) -- return -EINVAL; -- -- /* Clamp the on-screen start x/y to 0. The hardware doesn't -- * support negative y, and negative x wastes bandwidth. -- */ -- if (vc4_state->crtc_x < 0) { -- for (i = 0; i < num_planes; i++) { -- u32 cpp = fb->format->cpp[i]; -- u32 subs = ((i == 0) ? 1 : h_subsample); -- -- vc4_state->offsets[i] += (cpp * -- (-vc4_state->crtc_x) / subs); -- } -- vc4_state->src_w[0] += vc4_state->crtc_x; -- vc4_state->src_w[1] += vc4_state->crtc_x / h_subsample; -- vc4_state->crtc_x = 0; -- } -- -- if (vc4_state->crtc_y < 0) { -- for (i = 0; i < num_planes; i++) { -- u32 subs = ((i == 0) ? 1 : v_subsample); -- -- vc4_state->offsets[i] += (fb->pitches[i] * -- (-vc4_state->crtc_y) / subs); -- } -- vc4_state->src_h[0] += vc4_state->crtc_y; -- vc4_state->src_h[1] += vc4_state->crtc_y / v_subsample; -- vc4_state->crtc_y = 0; -+ /* Adjust the base pointer to the first pixel to be scanned out. */ -+ for (i = 0; i < num_planes; i++) { -+ vc4_state->offsets[i] += (vc4_state->src_y / -+ (i ? v_subsample : 1)) * -+ fb->pitches[i]; -+ vc4_state->offsets[i] += (vc4_state->src_x / -+ (i ? h_subsample : 1)) * -+ fb->format->cpp[i]; - } - - return 0; diff --git a/target/linux/brcm2708/patches-4.19/950-0759-drm-vc4-Move-offsets-adjustment-out-of-setup_clippin.patch b/target/linux/brcm2708/patches-4.19/950-0759-drm-vc4-Move-offsets-adjustment-out-of-setup_clippin.patch deleted file mode 100644 index 20a543d762..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0759-drm-vc4-Move-offsets-adjustment-out-of-setup_clippin.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 58a92eae6ed463c294381e72eefec701d23fcdaf Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Fri, 3 Aug 2018 11:22:30 +0200 -Subject: [PATCH 759/806] drm/vc4: Move ->offsets[] adjustment out of - setup_clipping_and_scaling() - -The offset adjustment depends on the framebuffer modified, so let's -just move this operation in the DRM_FORMAT_MOD_LINEAR case inside -vc4_plane_mode_set(). - -This we'll be able to fix offset calculation for -DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED and DRM_FORMAT_MOD_BROADCOM_SANDXXX. - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-4-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/vc4/vc4_plane.c | 26 ++++++++++++++++---------- - 1 file changed, 16 insertions(+), 10 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_plane.c -+++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -406,16 +406,6 @@ static int vc4_plane_setup_clipping_and_ - vc4_state->y_scaling[1] = VC4_SCALING_NONE; - } - -- /* Adjust the base pointer to the first pixel to be scanned out. */ -- for (i = 0; i < num_planes; i++) { -- vc4_state->offsets[i] += (vc4_state->src_y / -- (i ? v_subsample : 1)) * -- fb->pitches[i]; -- vc4_state->offsets[i] += (vc4_state->src_x / -- (i ? h_subsample : 1)) * -- fb->format->cpp[i]; -- } -- - return 0; - } - -@@ -523,6 +513,7 @@ static int vc4_plane_mode_set(struct drm - const struct hvs_format *format = vc4_get_hvs_format(fb->format->format); - u64 base_format_mod = fourcc_mod_broadcom_mod(fb->modifier); - int num_planes = drm_format_num_planes(format->drm); -+ u32 h_subsample, v_subsample; - bool mix_plane_alpha; - bool covers_screen; - u32 scl0, scl1, pitch0; -@@ -568,10 +559,25 @@ static int vc4_plane_mode_set(struct drm - scl1 = vc4_get_scl_field(state, 0); - } - -+ h_subsample = drm_format_horz_chroma_subsampling(format->drm); -+ v_subsample = drm_format_vert_chroma_subsampling(format->drm); -+ - switch (base_format_mod) { - case DRM_FORMAT_MOD_LINEAR: - tiling = SCALER_CTL0_TILING_LINEAR; - pitch0 = VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH); -+ -+ /* Adjust the base pointer to the first pixel to be scanned -+ * out. -+ */ -+ for (i = 0; i < num_planes; i++) { -+ vc4_state->offsets[i] += vc4_state->src_y / -+ (i ? v_subsample : 1) * -+ fb->pitches[i]; -+ vc4_state->offsets[i] += vc4_state->src_x / -+ (i ? h_subsample : 1) * -+ fb->format->cpp[i]; -+ } - break; - - case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: { diff --git a/target/linux/brcm2708/patches-4.19/950-0760-drm-vc4-Fix-X-Y-positioning-of-planes-using-T_TILES-.patch b/target/linux/brcm2708/patches-4.19/950-0760-drm-vc4-Fix-X-Y-positioning-of-planes-using-T_TILES-.patch deleted file mode 100644 index 765ace65bb..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0760-drm-vc4-Fix-X-Y-positioning-of-planes-using-T_TILES-.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 010e3665babdf589e26e2fb098ac1f39e519c0f6 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Fri, 3 Aug 2018 11:22:31 +0200 -Subject: [PATCH 760/806] drm/vc4: Fix X/Y positioning of planes using T_TILES - modifier - -X/Y positioning of T-format buffers is quite tricky and the current -implementation was failing to position a plane using this format -correctly when the CRTC X, Y or both X and Y offsets were negative. -It was also failing when the SRC X/Y offsets were != 0. - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-5-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/vc4/vc4_plane.c | 50 ++++++++++++++++++++++++++++----- - 1 file changed, 43 insertions(+), 7 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_plane.c -+++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -578,22 +578,58 @@ static int vc4_plane_mode_set(struct drm - (i ? h_subsample : 1) * - fb->format->cpp[i]; - } -+ - break; - - case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: { -- /* For T-tiled, the FB pitch is "how many bytes from -- * one row to the next, such that pitch * tile_h == -- * tile_size * tiles_per_row." -- */ - u32 tile_size_shift = 12; /* T tiles are 4kb */ -+ /* Whole-tile offsets, mostly for setting the pitch. */ -+ u32 tile_w_shift = fb->format->cpp[0] == 2 ? 6 : 5; - u32 tile_h_shift = 5; /* 16 and 32bpp are 32 pixels high */ -+ u32 tile_w_mask = (1 << tile_w_shift) - 1; -+ /* The height mask on 32-bit-per-pixel tiles is 63, i.e. twice -+ * the height (in pixels) of a 4k tile. -+ */ -+ u32 tile_h_mask = (2 << tile_h_shift) - 1; -+ /* For T-tiled, the FB pitch is "how many bytes from one row to -+ * the next, such that -+ * -+ * pitch * tile_h == tile_size * tiles_per_row -+ */ - u32 tiles_w = fb->pitches[0] >> (tile_size_shift - tile_h_shift); -+ u32 tiles_l = vc4_state->src_x >> tile_w_shift; -+ u32 tiles_r = tiles_w - tiles_l; -+ u32 tiles_t = vc4_state->src_y >> tile_h_shift; -+ /* Intra-tile offsets, which modify the base address (the -+ * SCALER_PITCH0_TILE_Y_OFFSET tells HVS how to walk from that -+ * base address). -+ */ -+ u32 tile_y = (vc4_state->src_y >> 4) & 1; -+ u32 subtile_y = (vc4_state->src_y >> 2) & 3; -+ u32 utile_y = vc4_state->src_y & 3; -+ u32 x_off = vc4_state->src_x & tile_w_mask; -+ u32 y_off = vc4_state->src_y & tile_h_mask; - - tiling = SCALER_CTL0_TILING_256B_OR_T; -+ pitch0 = (VC4_SET_FIELD(x_off, SCALER_PITCH0_SINK_PIX) | -+ VC4_SET_FIELD(y_off, SCALER_PITCH0_TILE_Y_OFFSET) | -+ VC4_SET_FIELD(tiles_l, SCALER_PITCH0_TILE_WIDTH_L) | -+ VC4_SET_FIELD(tiles_r, SCALER_PITCH0_TILE_WIDTH_R)); -+ vc4_state->offsets[0] += tiles_t * (tiles_w << tile_size_shift); -+ vc4_state->offsets[0] += subtile_y << 8; -+ vc4_state->offsets[0] += utile_y << 4; -+ -+ /* Rows of tiles alternate left-to-right and right-to-left. */ -+ if (tiles_t & 1) { -+ pitch0 |= SCALER_PITCH0_TILE_INITIAL_LINE_DIR; -+ vc4_state->offsets[0] += (tiles_w - tiles_l) << -+ tile_size_shift; -+ vc4_state->offsets[0] -= (1 + !tile_y) << 10; -+ } else { -+ vc4_state->offsets[0] += tiles_l << tile_size_shift; -+ vc4_state->offsets[0] += tile_y << 10; -+ } - -- pitch0 = (VC4_SET_FIELD(0, SCALER_PITCH0_TILE_Y_OFFSET) | -- VC4_SET_FIELD(0, SCALER_PITCH0_TILE_WIDTH_L) | -- VC4_SET_FIELD(tiles_w, SCALER_PITCH0_TILE_WIDTH_R)); - break; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0761-drm-vc4-Fix-NULL-pointer-dereference-in-the-async-up.patch b/target/linux/brcm2708/patches-4.19/950-0761-drm-vc4-Fix-NULL-pointer-dereference-in-the-async-up.patch deleted file mode 100644 index ef4da86e14..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0761-drm-vc4-Fix-NULL-pointer-dereference-in-the-async-up.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0e81807e647c5e12fd897f3d520252ea60de3ff9 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Thu, 15 Nov 2018 11:58:51 +0100 -Subject: [PATCH 761/806] drm/vc4: Fix NULL pointer dereference in the async - update path - -vc4_plane_atomic_async_update() calls vc4_plane_atomic_check() -which in turn calls vc4_plane_setup_clipping_and_scaling(), and since -commit 58a6a36fe8e0 ("drm/vc4: Use -drm_atomic_helper_check_plane_state() to simplify the logic"), this -function accesses plane_state->state which will be NULL when called -from the async update path because we're passing the current plane -state, and plane_state->state has been assigned to NULL in -drm_atomic_helper_swap_state(). - -Pass the new state instead of the current one (the new state has -->state set to a non-NULL value). - -Fixes: 58a6a36fe8e0 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic") -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-1-boris.brezillon@bootlin.com ---- - drivers/gpu/drm/vc4/vc4_plane.c | 15 +++++++++++++-- - 1 file changed, 13 insertions(+), 2 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_plane.c -+++ b/drivers/gpu/drm/vc4/vc4_plane.c -@@ -905,7 +905,7 @@ void vc4_plane_async_set_fb(struct drm_p - static void vc4_plane_atomic_async_update(struct drm_plane *plane, - struct drm_plane_state *state) - { -- struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state); -+ struct vc4_plane_state *vc4_state, *new_vc4_state; - - if (plane->state->fb != state->fb) { - vc4_plane_async_set_fb(plane, state->fb); -@@ -927,7 +927,18 @@ static void vc4_plane_atomic_async_updat - plane->state->src_y = state->src_y; - - /* Update the display list based on the new crtc_x/y. */ -- vc4_plane_atomic_check(plane, plane->state); -+ vc4_plane_atomic_check(plane, state); -+ -+ new_vc4_state = to_vc4_plane_state(state); -+ vc4_state = to_vc4_plane_state(plane->state); -+ -+ /* Update the current vc4_state pos0, pos2 and ptr0 dlist entries. */ -+ vc4_state->dlist[vc4_state->pos0_offset] = -+ new_vc4_state->dlist[vc4_state->pos0_offset]; -+ vc4_state->dlist[vc4_state->pos2_offset] = -+ new_vc4_state->dlist[vc4_state->pos2_offset]; -+ vc4_state->dlist[vc4_state->ptr0_offset] = -+ new_vc4_state->dlist[vc4_state->ptr0_offset]; - - /* Note that we can't just call vc4_plane_write_dlist() - * because that would smash the context data that the HVS is diff --git a/target/linux/brcm2708/patches-4.19/950-0764-ARM-dts-bcm2711-rpi-4-b-I2C-aliases-and-pulls.patch b/target/linux/brcm2708/patches-4.19/950-0764-ARM-dts-bcm2711-rpi-4-b-I2C-aliases-and-pulls.patch deleted file mode 100644 index 3434aec44d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0764-ARM-dts-bcm2711-rpi-4-b-I2C-aliases-and-pulls.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 188bd7c0085ac5b3d966aa899c6be644907157ea Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 12 Aug 2019 15:48:39 +0100 -Subject: [PATCH 764/806] ARM: dts: bcm2711-rpi-4-b: I2C aliases and pulls - -The I2C interface nodes need aliases to give them fixed bus numbers, -and setting the pulls on the GPIOs (particularly 9-13) increases the -chances of the bus working with weak or absent external pulls. - -See: https://www.raspberrypi.org/forums/posting.php?mode=reply&f=107&t=248439 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -23,6 +23,10 @@ - mmc0 = &emmc2; - mmc1 = &mmcnr; - mmc2 = &sdhost; -+ i2c3 = &i2c3; -+ i2c4 = &i2c4; -+ i2c5 = &i2c5; -+ i2c6 = &i2c6; - /delete-property/ ethernet; - /delete-property/ intc; - ethernet0 = &genet; -@@ -207,31 +211,37 @@ - i2c0_pins: i2c0 { - brcm,pins = <0 1>; - brcm,function = ; -+ brcm,pull = ; - }; - - i2c1_pins: i2c1 { - brcm,pins = <2 3>; - brcm,function = ; -+ brcm,pull = ; - }; - - i2c3_pins: i2c3 { - brcm,pins = <4 5>; - brcm,function = ; -+ brcm,pull = ; - }; - - i2c4_pins: i2c4 { - brcm,pins = <8 9>; - brcm,function = ; -+ brcm,pull = ; - }; - - i2c5_pins: i2c5 { - brcm,pins = <12 13>; - brcm,function = ; -+ brcm,pull = ; - }; - - i2c6_pins: i2c6 { - brcm,pins = <22 23>; - brcm,function = ; -+ brcm,pull = ; - }; - - i2s_pins: i2s { diff --git a/target/linux/brcm2708/patches-4.19/950-0765-xhci-Use-more-event-ring-segment-table-entries.patch b/target/linux/brcm2708/patches-4.19/950-0765-xhci-Use-more-event-ring-segment-table-entries.patch deleted file mode 100644 index e2bc7469fc..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0765-xhci-Use-more-event-ring-segment-table-entries.patch +++ /dev/null @@ -1,60 +0,0 @@ -From c2e02902a3b75b24306dac06cb6f75b683fa0267 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Tue, 13 Aug 2019 15:53:29 +0100 -Subject: [PATCH 765/806] xhci: Use more event ring segment table entries - -Users have reported log spam created by "Event Ring Full" xHC event -TRBs. These are caused by interrupt latency in conjunction with a very -busy set of devices on the bus. The errors are benign, but throughput -will suffer as the xHC will pause processing of transfers until the -event ring is drained by the kernel. Expand the number of event TRB slots -available by increasing the number of event ring segments in the ERST. - -Controllers have a hardware-defined limit as to the number of ERST -entries they can process, so make the actual number in use -min(ERST_MAX_SEGS, hw_max). - -Signed-off-by: Jonathan Bell ---- - drivers/usb/host/xhci-mem.c | 8 +++++--- - drivers/usb/host/xhci.h | 4 ++-- - 2 files changed, 7 insertions(+), 5 deletions(-) - ---- a/drivers/usb/host/xhci-mem.c -+++ b/drivers/usb/host/xhci-mem.c -@@ -2495,9 +2495,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, - * Event ring setup: Allocate a normal ring, but also setup - * the event ring segment table (ERST). Section 4.9.3. - */ -+ val2 = 1 << HCS_ERST_MAX(xhci->hcs_params2); -+ val2 = min_t(unsigned int, ERST_MAX_SEGS, val2); - xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Allocating event ring"); -- xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, 1, TYPE_EVENT, -- 0, flags); -+ xhci->event_ring = xhci_ring_alloc(xhci, val2, 1, TYPE_EVENT, -+ 0, flags); - if (!xhci->event_ring) - goto fail; - if (xhci_check_trb_in_td_math(xhci) < 0) -@@ -2510,7 +2512,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, - /* set ERST count with the number of entries in the segment table */ - val = readl(&xhci->ir_set->erst_size); - val &= ERST_SIZE_MASK; -- val |= ERST_NUM_SEGS; -+ val |= val2; - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "// Write ERST size = %i to ir_set 0 (some bits preserved)", - val); ---- a/drivers/usb/host/xhci.h -+++ b/drivers/usb/host/xhci.h -@@ -1643,8 +1643,8 @@ struct urb_priv { - * Each segment table entry is 4*32bits long. 1K seems like an ok size: - * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table, - * meaning 64 ring segments. -- * Initial allocated size of the ERST, in number of entries */ --#define ERST_NUM_SEGS 1 -+ * Maximum number of segments in the ERST */ -+#define ERST_MAX_SEGS 8 - /* Initial allocated size of the ERST, in number of entries */ - #define ERST_SIZE 64 - /* Initial number of event segment rings allocated */ diff --git a/target/linux/brcm2708/patches-4.19/950-0766-dwc_otg-use-align_buf-for-small-IN-control-transfers.patch b/target/linux/brcm2708/patches-4.19/950-0766-dwc_otg-use-align_buf-for-small-IN-control-transfers.patch deleted file mode 100644 index a2065c8261..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0766-dwc_otg-use-align_buf-for-small-IN-control-transfers.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 0c6190fa3cfeafd773b51b751a473d6775c23309 Mon Sep 17 00:00:00 2001 -From: P33M <2474547+P33M@users.noreply.github.com> -Date: Wed, 14 Aug 2019 14:35:50 +0100 -Subject: [PATCH 766/806] dwc_otg: use align_buf for small IN control transfers - (#3150) - -The hardware will do a 4-byte write to memory on any IN packet received -that is between 1 and 3 bytes long. This tramples memory in the uvcvideo -driver, as it uses a sequence of 1- and 2-byte control transfers to -query the min/max/range/step of each individual camera control and -gives us buffers that are offsets into a struct. - -Catch small control transfers in the data phase and use the align_buf -to bounce the correct number of bytes into the URB's buffer. - -In general, short packets on non-control endpoints should be OK as URBs -should have enough buffer space for a wMaxPacket size transfer. - -See: https://github.com/raspberrypi/linux/issues/3148 - -Signed-off-by: Jonathan Bell ---- - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -1182,6 +1182,7 @@ static void assign_and_init_hc(dwc_otg_h - dwc_otg_qtd_t *qtd; - dwc_otg_hcd_urb_t *urb; - void* ptr = NULL; -+ uint16_t wLength; - uint32_t intr_enable; - unsigned long flags; - gintmsk_data_t gintmsk = { .d32 = 0, }; -@@ -1293,6 +1294,23 @@ static void assign_and_init_hc(dwc_otg_h - break; - case DWC_OTG_CONTROL_DATA: - DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); -+ /* -+ * Hardware bug: small IN packets with length < 4 -+ * cause a 4-byte write to memory. We can only catch -+ * the case where we know a short packet is going to be -+ * returned in a control transfer, as the length is -+ * specified in the setup packet. This is only an issue -+ * for drivers that insist on packing a device's various -+ * properties into a struct and querying them one at a -+ * time (uvcvideo). -+ * Force the use of align_buf so that the subsequent -+ * memcpy puts the right number of bytes in the URB's -+ * buffer. -+ */ -+ wLength = ((uint16_t *)urb->setup_packet)[3]; -+ if (hc->ep_is_in && wLength < 4) -+ ptr = hc->xfer_buff; -+ - hc->data_pid_start = qtd->data_toggle; - break; - case DWC_OTG_CONTROL_STATUS: diff --git a/target/linux/brcm2708/patches-4.19/950-0767-Ported-pcie-brcmstb-bounce-buffer-implementation-to-.patch b/target/linux/brcm2708/patches-4.19/950-0767-Ported-pcie-brcmstb-bounce-buffer-implementation-to-.patch deleted file mode 100644 index a8f0b0186b..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0767-Ported-pcie-brcmstb-bounce-buffer-implementation-to-.patch +++ /dev/null @@ -1,818 +0,0 @@ -From ccd23ce562e8223ba7c6acf7dcb7058ff89ff7ec Mon Sep 17 00:00:00 2001 -From: yaroslavros -Date: Wed, 14 Aug 2019 15:22:55 +0100 -Subject: [PATCH 767/806] Ported pcie-brcmstb bounce buffer implementation to - ARM64. (#3144) - -Ported pcie-brcmstb bounce buffer implementation to ARM64. -This enables full 4G RAM usage on Raspberry Pi in 64-bit mode. - -Signed-off-by: Yaroslav Rosomakho ---- - arch/arm64/include/asm/dma-mapping.h | 21 + - arch/arm64/mm/dma-mapping.c | 50 ++ - drivers/pci/controller/Makefile | 3 + - drivers/pci/controller/pcie-brcmstb-bounce.h | 2 +- - .../pci/controller/pcie-brcmstb-bounce64.c | 576 ++++++++++++++++++ - drivers/pci/controller/pcie-brcmstb.c | 30 +- - 6 files changed, 658 insertions(+), 24 deletions(-) - create mode 100644 drivers/pci/controller/pcie-brcmstb-bounce64.c - ---- a/arch/arm64/include/asm/dma-mapping.h -+++ b/arch/arm64/include/asm/dma-mapping.h -@@ -24,6 +24,27 @@ - #include - #include - -+extern void *arm64_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, -+ gfp_t gfp, unsigned long attrs); -+extern void arm64_dma_free(struct device *dev, size_t size, void *cpu_addr, -+ dma_addr_t handle, unsigned long attrs); -+extern int arm64_dma_mmap(struct device *dev, struct vm_area_struct *vma, -+ void *cpu_addr, dma_addr_t dma_addr, size_t size, -+ unsigned long attrs); -+extern int arm64_dma_get_sgtable(struct device *dev, struct sg_table *sgt, -+ void *cpu_addr, dma_addr_t dma_addr, size_t size, -+ unsigned long attrs); -+extern int arm64_dma_map_sg(struct device *dev, struct scatterlist *sgl, int nelems, -+ enum dma_data_direction dir, unsigned long attrs); -+extern void arm64_dma_unmap_sg(struct device *dev, struct scatterlist *sgl, int, -+ enum dma_data_direction dir, unsigned long attrs); -+extern void arm64_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl, int nelems, -+ enum dma_data_direction dir); -+extern void arm64_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, int nelems, -+ enum dma_data_direction dir); -+ -+ -+ - extern const struct dma_map_ops dummy_dma_ops; - - static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) ---- a/arch/arm64/mm/dma-mapping.c -+++ b/arch/arm64/mm/dma-mapping.c -@@ -138,6 +138,12 @@ no_mem: - return NULL; - } - -+void *arm64_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, -+ gfp_t gfp, unsigned long attrs) -+{ -+ return __dma_alloc(dev, size, handle, gfp, attrs); -+} -+ - static void __dma_free(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle, - unsigned long attrs) -@@ -154,6 +160,12 @@ static void __dma_free(struct device *de - swiotlb_free(dev, size, swiotlb_addr, dma_handle, attrs); - } - -+void arm64_dma_free(struct device *dev, size_t size, void *cpu_addr, -+ dma_addr_t handle, unsigned long attrs) -+{ -+ __dma_free(dev, size, cpu_addr, handle, attrs); -+} -+ - static dma_addr_t __swiotlb_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir, -@@ -197,6 +209,12 @@ static int __swiotlb_map_sg_attrs(struct - return ret; - } - -+int arm64_dma_map_sg(struct device *dev, struct scatterlist *sgl, int nelems, -+ enum dma_data_direction dir, unsigned long attrs) -+{ -+ return __swiotlb_map_sg_attrs(dev, sgl, nelems, dir, attrs); -+} -+ - static void __swiotlb_unmap_sg_attrs(struct device *dev, - struct scatterlist *sgl, int nelems, - enum dma_data_direction dir, -@@ -213,6 +231,12 @@ static void __swiotlb_unmap_sg_attrs(str - swiotlb_unmap_sg_attrs(dev, sgl, nelems, dir, attrs); - } - -+void arm64_dma_unmap_sg(struct device *dev, struct scatterlist *sgl, int nelems, -+ enum dma_data_direction dir, unsigned long attrs) -+{ -+ __swiotlb_unmap_sg_attrs(dev, sgl, nelems, dir, attrs); -+} -+ - static void __swiotlb_sync_single_for_cpu(struct device *dev, - dma_addr_t dev_addr, size_t size, - enum dma_data_direction dir) -@@ -245,6 +269,12 @@ static void __swiotlb_sync_sg_for_cpu(st - swiotlb_sync_sg_for_cpu(dev, sgl, nelems, dir); - } - -+void arm64_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl, int nelems, -+ enum dma_data_direction dir) -+{ -+ __swiotlb_sync_sg_for_cpu(dev, sgl, nelems, dir); -+} -+ - static void __swiotlb_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, int nelems, - enum dma_data_direction dir) -@@ -259,6 +289,12 @@ static void __swiotlb_sync_sg_for_device - sg->length, dir); - } - -+void arm64_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, int nelems, -+ enum dma_data_direction dir) -+{ -+ __swiotlb_sync_sg_for_device(dev, sgl, nelems, dir); -+} -+ - static int __swiotlb_mmap_pfn(struct vm_area_struct *vma, - unsigned long pfn, size_t size) - { -@@ -294,6 +330,13 @@ static int __swiotlb_mmap(struct device - return __swiotlb_mmap_pfn(vma, pfn, size); - } - -+int arm64_dma_mmap(struct device *dev, struct vm_area_struct *vma, -+ void *cpu_addr, dma_addr_t dma_addr, size_t size, -+ unsigned long attrs) -+{ -+ return __swiotlb_mmap(dev, vma, cpu_addr, dma_addr, size, attrs); -+} -+ - static int __swiotlb_get_sgtable_page(struct sg_table *sgt, - struct page *page, size_t size) - { -@@ -314,6 +357,13 @@ static int __swiotlb_get_sgtable(struct - return __swiotlb_get_sgtable_page(sgt, page, size); - } - -+int arm64_dma_get_sgtable(struct device *dev, struct sg_table *sgt, -+ void *cpu_addr, dma_addr_t dma_addr, size_t size, -+ unsigned long attrs) -+{ -+ return __swiotlb_get_sgtable(dev, sgt, cpu_addr, dma_addr, size, attrs); -+} -+ - static int __swiotlb_dma_supported(struct device *hwdev, u64 mask) - { - if (swiotlb) ---- a/drivers/pci/controller/Makefile -+++ b/drivers/pci/controller/Makefile -@@ -32,6 +32,9 @@ obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcms - ifdef CONFIG_ARM - obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb-bounce.o - endif -+ifdef CONFIG_ARM64 -+obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb-bounce64.o -+endif - - obj-$(CONFIG_VMD) += vmd.o - # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW ---- a/drivers/pci/controller/pcie-brcmstb-bounce.h -+++ b/drivers/pci/controller/pcie-brcmstb-bounce.h -@@ -6,7 +6,7 @@ - #ifndef _PCIE_BRCMSTB_BOUNCE_H - #define _PCIE_BRCMSTB_BOUNCE_H - --#ifdef CONFIG_ARM -+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64) - - int brcm_pcie_bounce_init(struct device *dev, unsigned long buffer_size, - dma_addr_t threshold); ---- /dev/null -+++ b/drivers/pci/controller/pcie-brcmstb-bounce64.c -@@ -0,0 +1,576 @@ -+/* -+ * This code started out as a version of arch/arm/common/dmabounce.c, -+ * modified to cope with highmem pages. Now it has been changed heavily - -+ * it now preallocates a large block (currently 4MB) and carves it up -+ * sequentially in ring fashion, and DMA is used to copy the data - to the -+ * point where very little of the original remains. -+ * -+ * Copyright (C) 2019 Raspberry Pi (Trading) Ltd. -+ * -+ * Original version by Brad Parker (brad@heeltoe.com) -+ * Re-written by Christopher Hoover -+ * Made generic by Deepak Saxena -+ * -+ * Copyright (C) 2002 Hewlett Packard Company. -+ * Copyright (C) 2004 MontaVista Software, Inc. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define STATS -+ -+#ifdef STATS -+#define DO_STATS(X) do { X ; } while (0) -+#else -+#define DO_STATS(X) do { } while (0) -+#endif -+ -+/* ************************************************** */ -+ -+struct safe_buffer { -+ struct list_head node; -+ -+ /* original request */ -+ size_t size; -+ int direction; -+ -+ struct dmabounce_pool *pool; -+ void *safe; -+ dma_addr_t unsafe_dma_addr; -+ dma_addr_t safe_dma_addr; -+}; -+ -+struct dmabounce_pool { -+ unsigned long pages; -+ void *virt_addr; -+ dma_addr_t dma_addr; -+ unsigned long *alloc_map; -+ unsigned long alloc_pos; -+ spinlock_t lock; -+ struct device *dev; -+ unsigned long num_pages; -+#ifdef STATS -+ size_t max_size; -+ unsigned long num_bufs; -+ unsigned long max_bufs; -+ unsigned long max_pages; -+#endif -+}; -+ -+struct dmabounce_device_info { -+ struct device *dev; -+ dma_addr_t threshold; -+ struct list_head safe_buffers; -+ struct dmabounce_pool pool; -+ rwlock_t lock; -+#ifdef STATS -+ unsigned long map_count; -+ unsigned long unmap_count; -+ unsigned long sync_dev_count; -+ unsigned long sync_cpu_count; -+ unsigned long fail_count; -+ int attr_res; -+#endif -+}; -+ -+static struct dmabounce_device_info *g_dmabounce_device_info; -+ -+extern int bcm2838_dma40_memcpy_init(void); -+extern void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size); -+ -+#ifdef STATS -+static ssize_t -+bounce_show(struct device *dev, struct device_attribute *attr, char *buf) -+{ -+ struct dmabounce_device_info *device_info = g_dmabounce_device_info; -+ return sprintf(buf, "m:%lu/%lu s:%lu/%lu f:%lu s:%zu b:%lu/%lu a:%lu/%lu\n", -+ device_info->map_count, -+ device_info->unmap_count, -+ device_info->sync_dev_count, -+ device_info->sync_cpu_count, -+ device_info->fail_count, -+ device_info->pool.max_size, -+ device_info->pool.num_bufs, -+ device_info->pool.max_bufs, -+ device_info->pool.num_pages * PAGE_SIZE, -+ device_info->pool.max_pages * PAGE_SIZE); -+} -+ -+static DEVICE_ATTR(dmabounce_stats, 0444, bounce_show, NULL); -+#endif -+ -+static int bounce_create(struct dmabounce_pool *pool, struct device *dev, -+ unsigned long buffer_size) -+{ -+ int ret = -ENOMEM; -+ pool->pages = (buffer_size + PAGE_SIZE - 1)/PAGE_SIZE; -+ pool->alloc_map = bitmap_zalloc(pool->pages, GFP_KERNEL); -+ if (!pool->alloc_map) -+ goto err_bitmap; -+ pool->virt_addr = dma_alloc_coherent(dev, pool->pages * PAGE_SIZE, -+ &pool->dma_addr, GFP_KERNEL); -+ if (!pool->virt_addr) -+ goto err_dmabuf; -+ -+ pool->alloc_pos = 0; -+ spin_lock_init(&pool->lock); -+ pool->dev = dev; -+ pool->num_pages = 0; -+ -+ DO_STATS(pool->max_size = 0); -+ DO_STATS(pool->num_bufs = 0); -+ DO_STATS(pool->max_bufs = 0); -+ DO_STATS(pool->max_pages = 0); -+ -+ return 0; -+ -+err_dmabuf: -+ bitmap_free(pool->alloc_map); -+err_bitmap: -+ return ret; -+} -+ -+static void bounce_destroy(struct dmabounce_pool *pool) -+{ -+ dma_free_coherent(pool->dev, pool->pages * PAGE_SIZE, pool->virt_addr, -+ pool->dma_addr); -+ -+ bitmap_free(pool->alloc_map); -+} -+ -+static void *bounce_alloc(struct dmabounce_pool *pool, size_t size, -+ dma_addr_t *dmaaddrp) -+{ -+ unsigned long pages; -+ unsigned long flags; -+ unsigned long pos; -+ -+ pages = (size + PAGE_SIZE - 1)/PAGE_SIZE; -+ -+ DO_STATS(pool->max_size = max(size, pool->max_size)); -+ -+ spin_lock_irqsave(&pool->lock, flags); -+ pos = bitmap_find_next_zero_area(pool->alloc_map, pool->pages, -+ pool->alloc_pos, pages, 0); -+ /* If not found, try from the start */ -+ if (pos >= pool->pages && pool->alloc_pos) -+ pos = bitmap_find_next_zero_area(pool->alloc_map, pool->pages, -+ 0, pages, 0); -+ -+ if (pos >= pool->pages) { -+ spin_unlock_irqrestore(&pool->lock, flags); -+ return NULL; -+ } -+ -+ bitmap_set(pool->alloc_map, pos, pages); -+ pool->alloc_pos = (pos + pages) % pool->pages; -+ pool->num_pages += pages; -+ -+ DO_STATS(pool->num_bufs++); -+ DO_STATS(pool->max_bufs = max(pool->num_bufs, pool->max_bufs)); -+ DO_STATS(pool->max_pages = max(pool->num_pages, pool->max_pages)); -+ -+ spin_unlock_irqrestore(&pool->lock, flags); -+ -+ *dmaaddrp = pool->dma_addr + pos * PAGE_SIZE; -+ -+ return pool->virt_addr + pos * PAGE_SIZE; -+} -+ -+static void -+bounce_free(struct dmabounce_pool *pool, void *buf, size_t size) -+{ -+ unsigned long pages; -+ unsigned long flags; -+ unsigned long pos; -+ -+ pages = (size + PAGE_SIZE - 1)/PAGE_SIZE; -+ pos = (buf - pool->virt_addr)/PAGE_SIZE; -+ -+ BUG_ON((buf - pool->virt_addr) & (PAGE_SIZE - 1)); -+ -+ spin_lock_irqsave(&pool->lock, flags); -+ bitmap_clear(pool->alloc_map, pos, pages); -+ pool->num_pages -= pages; -+ if (pool->num_pages == 0) -+ pool->alloc_pos = 0; -+ DO_STATS(pool->num_bufs--); -+ spin_unlock_irqrestore(&pool->lock, flags); -+} -+ -+/* allocate a 'safe' buffer and keep track of it */ -+static struct safe_buffer * -+alloc_safe_buffer(struct dmabounce_device_info *device_info, -+ dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) -+{ -+ struct safe_buffer *buf; -+ struct dmabounce_pool *pool = &device_info->pool; -+ struct device *dev = device_info->dev; -+ unsigned long flags; -+ -+ /* -+ * Although one might expect this to be called in thread context, -+ * using GFP_KERNEL here leads to hard-to-debug lockups. in_atomic() -+ * was previously used to select the appropriate allocation mode, -+ * but this is unsafe. -+ */ -+ buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC); -+ if (!buf) { -+ dev_warn(dev, "%s: kmalloc failed\n", __func__); -+ return NULL; -+ } -+ -+ buf->unsafe_dma_addr = dma_addr; -+ buf->size = size; -+ buf->direction = dir; -+ buf->pool = pool; -+ -+ buf->safe = bounce_alloc(pool, size, &buf->safe_dma_addr); -+ -+ if (!buf->safe) { -+ dev_warn(dev, -+ "%s: could not alloc dma memory (size=%d)\n", -+ __func__, size); -+ kfree(buf); -+ return NULL; -+ } -+ -+ write_lock_irqsave(&device_info->lock, flags); -+ list_add(&buf->node, &device_info->safe_buffers); -+ write_unlock_irqrestore(&device_info->lock, flags); -+ -+ return buf; -+} -+ -+/* determine if a buffer is from our "safe" pool */ -+static struct safe_buffer * -+find_safe_buffer(struct dmabounce_device_info *device_info, -+ dma_addr_t safe_dma_addr) -+{ -+ struct safe_buffer *b, *rb = NULL; -+ unsigned long flags; -+ -+ read_lock_irqsave(&device_info->lock, flags); -+ -+ list_for_each_entry(b, &device_info->safe_buffers, node) -+ if (b->safe_dma_addr <= safe_dma_addr && -+ b->safe_dma_addr + b->size > safe_dma_addr) { -+ rb = b; -+ break; -+ } -+ -+ read_unlock_irqrestore(&device_info->lock, flags); -+ return rb; -+} -+ -+static void -+free_safe_buffer(struct dmabounce_device_info *device_info, -+ struct safe_buffer *buf) -+{ -+ unsigned long flags; -+ -+ write_lock_irqsave(&device_info->lock, flags); -+ list_del(&buf->node); -+ write_unlock_irqrestore(&device_info->lock, flags); -+ -+ bounce_free(buf->pool, buf->safe, buf->size); -+ -+ kfree(buf); -+} -+ -+/* ************************************************** */ -+ -+static struct safe_buffer * -+find_safe_buffer_dev(struct device *dev, dma_addr_t dma_addr, const char *where) -+{ -+ if (!dev || !g_dmabounce_device_info) -+ return NULL; -+ if (dma_mapping_error(dev, dma_addr)) { -+ dev_err(dev, "Trying to %s invalid mapping\n", where); -+ return NULL; -+ } -+ return find_safe_buffer(g_dmabounce_device_info, dma_addr); -+} -+ -+static dma_addr_t -+map_single(struct device *dev, struct safe_buffer *buf, size_t size, -+ enum dma_data_direction dir, unsigned long attrs) -+{ -+ BUG_ON(buf->size != size); -+ BUG_ON(buf->direction != dir); -+ -+ dev_dbg(dev, "map: %llx->%llx\n", (u64)buf->unsafe_dma_addr, -+ (u64)buf->safe_dma_addr); -+ -+ if ((dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) && -+ !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) -+ bcm2838_dma40_memcpy(buf->safe_dma_addr, buf->unsafe_dma_addr, -+ size); -+ -+ return buf->safe_dma_addr; -+} -+ -+static dma_addr_t -+unmap_single(struct device *dev, struct safe_buffer *buf, size_t size, -+ enum dma_data_direction dir, unsigned long attrs) -+{ -+ BUG_ON(buf->size != size); -+ BUG_ON(buf->direction != dir); -+ -+ if ((dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) && -+ !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) { -+ dev_dbg(dev, "unmap: %llx->%llx\n", (u64)buf->safe_dma_addr, -+ (u64)buf->unsafe_dma_addr); -+ -+ bcm2838_dma40_memcpy(buf->unsafe_dma_addr, buf->safe_dma_addr, -+ size); -+ } -+ return buf->unsafe_dma_addr; -+} -+ -+/* ************************************************** */ -+ -+/* -+ * see if a buffer address is in an 'unsafe' range. if it is -+ * allocate a 'safe' buffer and copy the unsafe buffer into it. -+ * substitute the safe buffer for the unsafe one. -+ * (basically move the buffer from an unsafe area to a safe one) -+ */ -+static dma_addr_t -+dmabounce_map_page(struct device *dev, struct page *page, unsigned long offset, -+ size_t size, enum dma_data_direction dir, -+ unsigned long attrs) -+{ -+ struct dmabounce_device_info *device_info = g_dmabounce_device_info; -+ dma_addr_t dma_addr; -+ -+ dma_addr = phys_to_dma(dev, page_to_phys(page)) + offset; -+ -+ swiotlb_sync_single_for_device(dev, dma_addr, size, dir); -+ if (!is_device_dma_coherent(dev)) -+ __dma_map_area(phys_to_virt(dma_to_phys(dev, dma_addr)), size, dir); -+ -+ if (device_info && (dma_addr + size) > device_info->threshold) { -+ struct safe_buffer *buf; -+ -+ buf = alloc_safe_buffer(device_info, dma_addr, size, dir); -+ if (!buf) { -+ DO_STATS(device_info->fail_count++); -+ return (~(dma_addr_t)0x0); -+ } -+ -+ DO_STATS(device_info->map_count++); -+ -+ dma_addr = map_single(dev, buf, size, dir, attrs); -+ } -+ return dma_addr; -+} -+ -+/* -+ * see if a mapped address was really a "safe" buffer and if so, copy -+ * the data from the safe buffer back to the unsafe buffer and free up -+ * the safe buffer. (basically return things back to the way they -+ * should be) -+ */ -+static void -+dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, -+ enum dma_data_direction dir, unsigned long attrs) -+{ -+ struct safe_buffer *buf; -+ -+ buf = find_safe_buffer_dev(dev, dma_addr, __func__); -+ if (buf) { -+ DO_STATS(g_dmabounce_device_info->unmap_count++); -+ dma_addr = unmap_single(dev, buf, size, dir, attrs); -+ free_safe_buffer(g_dmabounce_device_info, buf); -+ } -+ -+ if (!is_device_dma_coherent(dev)) -+ __dma_unmap_area(phys_to_virt(dma_to_phys(dev, dma_addr)), size, dir); -+ swiotlb_sync_single_for_cpu(dev, dma_addr, size, dir); -+} -+ -+/* -+ * A version of dmabounce_map_page that assumes the mapping has already -+ * been created - intended for streaming operation. -+ */ -+static void -+dmabounce_sync_for_device(struct device *dev, dma_addr_t dma_addr, size_t size, -+ enum dma_data_direction dir) -+{ -+ struct safe_buffer *buf; -+ -+ swiotlb_sync_single_for_device(dev, dma_addr, size, dir); -+ if (!is_device_dma_coherent(dev)) -+ __dma_map_area(phys_to_virt(dma_to_phys(dev, dma_addr)), size, dir); -+ -+ buf = find_safe_buffer_dev(dev, dma_addr, __func__); -+ if (buf) { -+ DO_STATS(g_dmabounce_device_info->sync_dev_count++); -+ map_single(dev, buf, size, dir, 0); -+ } -+} -+ -+/* -+ * A version of dmabounce_unmap_page that doesn't destroy the mapping - -+ * intended for streaming operation. -+ */ -+static void -+dmabounce_sync_for_cpu(struct device *dev, dma_addr_t dma_addr, -+ size_t size, enum dma_data_direction dir) -+{ -+ struct safe_buffer *buf; -+ -+ buf = find_safe_buffer_dev(dev, dma_addr, __func__); -+ if (buf) { -+ DO_STATS(g_dmabounce_device_info->sync_cpu_count++); -+ dma_addr = unmap_single(dev, buf, size, dir, 0); -+ } -+ -+ if (!is_device_dma_coherent(dev)) -+ __dma_unmap_area(phys_to_virt(dma_to_phys(dev, dma_addr)), size, dir); -+ swiotlb_sync_single_for_cpu(dev, dma_addr, size, dir); -+} -+ -+static int dmabounce_dma_supported(struct device *dev, u64 dma_mask) -+{ -+ if (g_dmabounce_device_info) -+ return 0; -+ -+ return swiotlb_dma_supported(dev, dma_mask); -+} -+ -+static int dmabounce_mapping_error(struct device *dev, dma_addr_t dma_addr) -+{ -+ return swiotlb_dma_mapping_error(dev, dma_addr); -+} -+ -+static const struct dma_map_ops dmabounce_ops = { -+ .alloc = arm64_dma_alloc, -+ .free = arm64_dma_free, -+ .mmap = arm64_dma_mmap, -+ .get_sgtable = arm64_dma_get_sgtable, -+ .map_page = dmabounce_map_page, -+ .unmap_page = dmabounce_unmap_page, -+ .sync_single_for_cpu = dmabounce_sync_for_cpu, -+ .sync_single_for_device = dmabounce_sync_for_device, -+ .map_sg = arm64_dma_map_sg, -+ .unmap_sg = arm64_dma_unmap_sg, -+ .sync_sg_for_cpu = arm64_dma_sync_sg_for_cpu, -+ .sync_sg_for_device = arm64_dma_sync_sg_for_device, -+ .dma_supported = dmabounce_dma_supported, -+ .mapping_error = dmabounce_mapping_error, -+}; -+ -+int brcm_pcie_bounce_init(struct device *dev, -+ unsigned long buffer_size, -+ dma_addr_t threshold) -+{ -+ struct dmabounce_device_info *device_info; -+ int ret; -+ -+ /* Only support a single client */ -+ if (g_dmabounce_device_info) -+ return -EBUSY; -+ -+ ret = bcm2838_dma40_memcpy_init(); -+ if (ret) -+ return ret; -+ -+ device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC); -+ if (!device_info) { -+ dev_err(dev, -+ "Could not allocated dmabounce_device_info\n"); -+ return -ENOMEM; -+ } -+ -+ ret = bounce_create(&device_info->pool, dev, buffer_size); -+ if (ret) { -+ dev_err(dev, -+ "dmabounce: could not allocate %ld byte DMA pool\n", -+ buffer_size); -+ goto err_bounce; -+ } -+ -+ device_info->dev = dev; -+ device_info->threshold = threshold; -+ INIT_LIST_HEAD(&device_info->safe_buffers); -+ rwlock_init(&device_info->lock); -+ -+ DO_STATS(device_info->map_count = 0); -+ DO_STATS(device_info->unmap_count = 0); -+ DO_STATS(device_info->sync_dev_count = 0); -+ DO_STATS(device_info->sync_cpu_count = 0); -+ DO_STATS(device_info->fail_count = 0); -+ DO_STATS(device_info->attr_res = -+ device_create_file(dev, &dev_attr_dmabounce_stats)); -+ -+ g_dmabounce_device_info = device_info; -+ -+ dev_err(dev, "dmabounce: initialised - %ld kB, threshold %pad\n", -+ buffer_size / 1024, &threshold); -+ -+ return 0; -+ -+ err_bounce: -+ kfree(device_info); -+ return ret; -+} -+EXPORT_SYMBOL(brcm_pcie_bounce_init); -+ -+void brcm_pcie_bounce_uninit(struct device *dev) -+{ -+ struct dmabounce_device_info *device_info = g_dmabounce_device_info; -+ -+ g_dmabounce_device_info = NULL; -+ -+ if (!device_info) { -+ dev_warn(dev, -+ "Never registered with dmabounce but attempting" -+ "to unregister!\n"); -+ return; -+ } -+ -+ if (!list_empty(&device_info->safe_buffers)) { -+ dev_err(dev, -+ "Removing from dmabounce with pending buffers!\n"); -+ BUG(); -+ } -+ -+ bounce_destroy(&device_info->pool); -+ -+ DO_STATS(if (device_info->attr_res == 0) -+ device_remove_file(dev, &dev_attr_dmabounce_stats)); -+ -+ kfree(device_info); -+} -+EXPORT_SYMBOL(brcm_pcie_bounce_uninit); -+ -+int brcm_pcie_bounce_register_dev(struct device *dev) -+{ -+ set_dma_ops(dev, &dmabounce_ops); -+ -+ return 0; -+} -+EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); -+ -+MODULE_AUTHOR("Phil Elwell "); -+MODULE_DESCRIPTION("Dedicate DMA bounce support for pcie-brcmstb"); -+MODULE_LICENSE("GPL"); ---- a/drivers/pci/controller/pcie-brcmstb.c -+++ b/drivers/pci/controller/pcie-brcmstb.c -@@ -617,28 +617,6 @@ static const struct dma_map_ops brcm_dma - - static void brcm_set_dma_ops(struct device *dev) - { -- int ret; -- -- if (IS_ENABLED(CONFIG_ARM64)) { -- /* -- * We are going to invoke get_dma_ops(). That -- * function, at this point in time, invokes -- * get_arch_dma_ops(), and for ARM64 that function -- * returns a pointer to dummy_dma_ops. So then we'd -- * like to call arch_setup_dma_ops(), but that isn't -- * exported. Instead, we call of_dma_configure(), -- * which is exported, and this calls -- * arch_setup_dma_ops(). Once we do this the call to -- * get_dma_ops() will work properly because -- * dev->dma_ops will be set. -- */ -- ret = of_dma_configure(dev, dev->of_node, true); -- if (ret) { -- dev_err(dev, "of_dma_configure() failed: %d\n", ret); -- return; -- } -- } -- - arch_dma_ops = get_dma_ops(dev); - if (!arch_dma_ops) { - dev_err(dev, "failed to get arch_dma_ops\n"); -@@ -657,12 +635,12 @@ static int brcmstb_platform_notifier(str - extern unsigned long max_pfn; - struct device *dev = __dev; - const char *rc_name = "0000:00:00.0"; -+ int ret; - - switch (event) { - case BUS_NOTIFY_ADD_DEVICE: - if (max_pfn > (bounce_threshold/PAGE_SIZE) && - strcmp(dev->kobj.name, rc_name)) { -- int ret; - - ret = brcm_pcie_bounce_register_dev(dev); - if (ret) { -@@ -671,6 +649,12 @@ static int brcmstb_platform_notifier(str - ret); - return ret; - } -+ } else if (IS_ENABLED(CONFIG_ARM64)) { -+ ret = of_dma_configure(dev, dev->of_node, true); -+ if (ret) { -+ dev_err(dev, "of_dma_configure() failed: %d\n", ret); -+ return; -+ } - } - brcm_set_dma_ops(dev); - return NOTIFY_OK; diff --git a/target/linux/brcm2708/patches-4.19/950-0768-configs-arm64-vcm2711-Enable-V3D.patch b/target/linux/brcm2708/patches-4.19/950-0768-configs-arm64-vcm2711-Enable-V3D.patch deleted file mode 100644 index 339ba31a39..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0768-configs-arm64-vcm2711-Enable-V3D.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 709962264bec8f8483df374da5e946c982348e87 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 15 Aug 2019 12:02:34 +0100 -Subject: [PATCH 768/806] configs: arm64/vcm2711: Enable V3D - -Enable the V3D driver, which depends on BCM2835_POWER. - -Originally submitted by GitHub user 'phire' in a slightly different -form. - -See: https://github.com/raspberrypi/linux/pull/3063 - -Signed-off-by: Phil Elwell ---- - drivers/gpu/drm/v3d/Kconfig | 2 +- - 2 files changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/gpu/drm/v3d/Kconfig -+++ b/drivers/gpu/drm/v3d/Kconfig -@@ -1,6 +1,6 @@ - config DRM_V3D - tristate "Broadcom V3D 3.x and newer" -- depends on ARCH_BCM || ARCH_BCMSTB || COMPILE_TEST -+ depends on ARCH_BCM || ARCH_BCMSTB || ARCH_BCM2835 || COMPILE_TEST - depends on DRM - depends on COMMON_CLK - depends on MMU diff --git a/target/linux/brcm2708/patches-4.19/950-0769-overlays-sc16ic752-i2c-Fix-xtal-parameter.patch b/target/linux/brcm2708/patches-4.19/950-0769-overlays-sc16ic752-i2c-Fix-xtal-parameter.patch deleted file mode 100644 index 1e3147f00e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0769-overlays-sc16ic752-i2c-Fix-xtal-parameter.patch +++ /dev/null @@ -1,24 +0,0 @@ -From ee24998ecaed3d03890a7a5e04dddb8c5d073e97 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Sat, 17 Aug 2019 19:47:30 +0100 -Subject: [PATCH 769/806] overlays: sc16ic752-i2c: Fix xtal parameter - -The xtal parameter is targetting the wrong node - fix it. - -See: https://github.com/raspberrypi/linux/issues/3156 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts -@@ -35,6 +35,6 @@ - __overrides__ { - int_pin = <&sc16is752>,"interrupts:0"; - addr = <&sc16is752>,"reg:0",<&sc16is752_clk>,"name"; -- xtal = <&sc16is752>,"clock-frequency:0"; -+ xtal = <&sc16is752_clk>,"clock-frequency:0"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0770-vc-sm-cma-Fix-compatibility-ioctl.patch b/target/linux/brcm2708/patches-4.19/950-0770-vc-sm-cma-Fix-compatibility-ioctl.patch deleted file mode 100644 index fe67ab1e06..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0770-vc-sm-cma-Fix-compatibility-ioctl.patch +++ /dev/null @@ -1,64 +0,0 @@ -From a24a0a621486b36bcdf5c5e0afb05a5d1dd30003 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 19 Aug 2019 15:45:20 +0100 -Subject: [PATCH 770/806] vc-sm-cma: Fix compatibility ioctl - -This code path hasn't been used previously. -Fixed up after testing with kodi on 32-bit userland and 64-bit kernel - -Signed-off-by: popcornmix ---- - drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 12 ++++-------- - 1 file changed, 4 insertions(+), 8 deletions(-) - ---- a/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -+++ b/drivers/staging/vc04_services/vc-sm-cma/vc_sm.c -@@ -1501,11 +1501,10 @@ static long vc_sm_cma_ioctl(struct file - return ret; - } - --#ifndef CONFIG_ARM64 - #ifdef CONFIG_COMPAT - struct vc_sm_cma_ioctl_clean_invalid2_32 { - u32 op_count; -- struct vc_sm_cma_ioctl_clean_invalid_block { -+ struct vc_sm_cma_ioctl_clean_invalid_block_32 { - u16 invalidate_mode; - u16 block_count; - compat_uptr_t start_address; -@@ -1516,7 +1515,7 @@ struct vc_sm_cma_ioctl_clean_invalid2_32 - - #define VC_SM_CMA_CMD_CLEAN_INVALID2_32\ - _IOR(VC_SM_CMA_MAGIC_TYPE, VC_SM_CMA_CMD_CLEAN_INVALID2,\ -- struct vc_sm_cma_ioctl_clean_invalid2) -+ struct vc_sm_cma_ioctl_clean_invalid2_32) - - static long vc_sm_cma_compat_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -@@ -1524,24 +1523,21 @@ static long vc_sm_cma_compat_ioctl(struc - switch (cmd) { - case VC_SM_CMA_CMD_CLEAN_INVALID2_32: - /* FIXME */ -- break; -+ return -EINVAL; - - default: -- return vc_sm_cma_compat_ioctl(file, cmd, arg); -+ return vc_sm_cma_ioctl(file, cmd, arg); - } - } - #endif --#endif - - /* Device operations that we managed in this driver. */ - static const struct file_operations vc_sm_ops = { - .owner = THIS_MODULE, - .unlocked_ioctl = vc_sm_cma_ioctl, --#ifndef CONFIG_ARM64 - #ifdef CONFIG_COMPAT - .compat_ioctl = vc_sm_cma_compat_ioctl, - #endif --#endif - .open = vc_sm_cma_open, - .release = vc_sm_cma_release, - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0772-staging-bcm2835-codec-add-support-for-V4L2_CID_MPEG_.patch b/target/linux/brcm2708/patches-4.19/950-0772-staging-bcm2835-codec-add-support-for-V4L2_CID_MPEG_.patch deleted file mode 100644 index 01795ba0db..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0772-staging-bcm2835-codec-add-support-for-V4L2_CID_MPEG_.patch +++ /dev/null @@ -1,55 +0,0 @@ -From ae6dba510ac29ef7b0e6c838fb1bcc8b9eb474b7 Mon Sep 17 00:00:00 2001 -From: Aman Gupta -Date: Thu, 22 Aug 2019 22:31:37 +0000 -Subject: [PATCH 772/806] staging: bcm2835-codec: add support for - V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME - -fixes #3171 - -Signed-off-by: Aman Gupta ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 19 ++++++++++++++++++- - 1 file changed, 18 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -1587,6 +1587,20 @@ static int bcm2835_codec_s_ctrl(struct v - ret = bcm2835_codec_set_level_profile(ctx, ctrl); - break; - -+ case V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME: { -+ u32 mmal_bool = 1; -+ -+ if (!ctx->component) -+ break; -+ -+ ret = vchiq_mmal_port_parameter_set(ctx->dev->instance, -+ &ctx->component->output[0], -+ MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME, -+ &mmal_bool, -+ sizeof(mmal_bool)); -+ break; -+ } -+ - default: - v4l2_err(&ctx->dev->v4l2_dev, "Invalid control\n"); - return -EINVAL; -@@ -2311,7 +2325,7 @@ static int bcm2835_codec_open(struct fil - hdl = &ctx->hdl; - if (dev->role == ENCODE) { - /* Encode controls */ -- v4l2_ctrl_handler_init(hdl, 6); -+ v4l2_ctrl_handler_init(hdl, 7); - - v4l2_ctrl_new_std_menu(hdl, &bcm2835_codec_ctrl_ops, - V4L2_CID_MPEG_VIDEO_BITRATE_MODE, -@@ -2355,6 +2369,9 @@ static int bcm2835_codec_open(struct fil - BIT(V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) | - BIT(V4L2_MPEG_VIDEO_H264_PROFILE_HIGH)), - V4L2_MPEG_VIDEO_H264_PROFILE_HIGH); -+ v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops, -+ V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME, -+ 0, 0, 0, 0); - if (hdl->error) { - rc = hdl->error; - goto free_ctrl_handler; diff --git a/target/linux/brcm2708/patches-4.19/950-0773-staging-bcm2835-codec-remove-unnecessary-padding-on-.patch b/target/linux/brcm2708/patches-4.19/950-0773-staging-bcm2835-codec-remove-unnecessary-padding-on-.patch deleted file mode 100644 index bf1b347aa1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0773-staging-bcm2835-codec-remove-unnecessary-padding-on-.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 9a2eab654b11d27bcc5a32ebd374f6c9acc38ce4 Mon Sep 17 00:00:00 2001 -From: Aman Gupta -Date: Fri, 23 Aug 2019 16:29:07 -0700 -Subject: [PATCH 773/806] staging: bcm2835-codec: remove unnecessary padding on - encoder input - -The ISP and ENCODE roles have the same underlying hardware. Neither requires vertical alignment. - -Signed-off-by: Aman Gupta ---- - .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -1050,12 +1050,12 @@ static int vidioc_try_fmt(struct bcm2835 - f->fmt.pix_mp.height = MIN_H; - - /* -- * For codecs the buffer must have a vertical alignment of 16 -+ * For decoders the buffer must have a vertical alignment of 16 - * lines. - * The selection will reflect any cropping rectangle when only - * some of the pixels are active. - */ -- if (ctx->dev->role != ISP) -+ if (ctx->dev->role == DECODE) - f->fmt.pix_mp.height = ALIGN(f->fmt.pix_mp.height, 16); - } - f->fmt.pix_mp.num_planes = 1; diff --git a/target/linux/brcm2708/patches-4.19/950-0774-arm-dts-add-missing-Raspberry-Pi-model-names.patch b/target/linux/brcm2708/patches-4.19/950-0774-arm-dts-add-missing-Raspberry-Pi-model-names.patch deleted file mode 100644 index e4593e8371..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0774-arm-dts-add-missing-Raspberry-Pi-model-names.patch +++ /dev/null @@ -1,58 +0,0 @@ -From ac6c4a17f6f7aeb977b04dd4dc7e801b7776499f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= -Date: Thu, 29 Aug 2019 16:26:22 +0200 -Subject: [PATCH 774/806] arm: dts: add missing Raspberry Pi model names -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This is needed to identify the different models on distributions like OpenWrt. - -Signed-off-by: Álvaro Fernández Rojas ---- - arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi-cm.dts | 1 + - arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 1 + - 4 files changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -@@ -6,6 +6,7 @@ - #include "bcm283x-rpi-csi1-2lane.dtsi" - - / { -+ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; - model = "Raspberry Pi Model B+"; - }; - ---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts -@@ -6,6 +6,7 @@ - #include "bcm283x-rpi-csi1-2lane.dtsi" - - / { -+ compatible = "raspberrypi,model-b", "brcm,bcm2835"; - model = "Raspberry Pi Model B"; - }; - ---- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts -@@ -5,6 +5,7 @@ - #include "bcm283x-rpi-csi1-4lane.dtsi" - - / { -+ compatible = "raspberrypi,compute-module", "brcm,bcm2835"; - model = "Raspberry Pi Compute Module"; - }; - ---- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -@@ -6,6 +6,7 @@ - #include "bcm283x-rpi-csi1-4lane.dtsi" - - / { -+ compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; - model = "Raspberry Pi Compute Module 3"; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0776-arch-arm-Add-model-string-to-cpuinfo.patch b/target/linux/brcm2708/patches-4.19/950-0776-arch-arm-Add-model-string-to-cpuinfo.patch deleted file mode 100644 index e298f85db1..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0776-arch-arm-Add-model-string-to-cpuinfo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From d9f55647637be79ff42cb85497e43ca8b9a69a7b Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 3 Sep 2019 18:16:56 +0100 -Subject: [PATCH 776/806] arch/arm: Add model string to cpuinfo - -Signed-off-by: Phil Elwell ---- - arch/arm/kernel/setup.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/kernel/setup.c -+++ b/arch/arm/kernel/setup.c -@@ -1238,6 +1238,8 @@ static int c_show(struct seq_file *m, vo - { - int i, j; - u32 cpuid; -+ struct device_node *np; -+ const char *model; - - for_each_online_cpu(i) { - /* -@@ -1297,6 +1299,14 @@ static int c_show(struct seq_file *m, vo - seq_printf(m, "Revision\t: %04x\n", system_rev); - seq_printf(m, "Serial\t\t: %s\n", system_serial); - -+ np = of_find_node_by_path("/"); -+ if (np) { -+ if (!of_property_read_string(np, "model", -+ &model)) -+ seq_printf(m, "Model\t\t: %s\n", model); -+ of_node_put(np); -+ } -+ - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0777-arch-arm64-Add-Revision-Serial-Model-to-cpuinfo.patch b/target/linux/brcm2708/patches-4.19/950-0777-arch-arm64-Add-Revision-Serial-Model-to-cpuinfo.patch deleted file mode 100644 index 6ec99e3529..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0777-arch-arm64-Add-Revision-Serial-Model-to-cpuinfo.patch +++ /dev/null @@ -1,58 +0,0 @@ -From aabfcb0abbc34ca5f3c4b4f872123166eca2e100 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 3 Sep 2019 18:17:25 +0100 -Subject: [PATCH 777/806] arch/arm64: Add Revision, Serial, Model to cpuinfo - -Signed-off-by: Phil Elwell ---- - arch/arm64/kernel/cpuinfo.c | 25 +++++++++++++++++++++++++ - 1 file changed, 25 insertions(+) - ---- a/arch/arm64/kernel/cpuinfo.c -+++ b/arch/arm64/kernel/cpuinfo.c -@@ -27,6 +27,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -126,6 +127,10 @@ static int c_show(struct seq_file *m, vo - { - int i, j; - bool compat = personality(current->personality) == PER_LINUX32; -+ struct device_node *np; -+ const char *model; -+ const char *serial; -+ u32 revision; - - for_each_online_cpu(i) { - struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i); -@@ -177,6 +182,26 @@ static int c_show(struct seq_file *m, vo - seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr)); - } - -+ seq_printf(m, "Hardware\t: BCM2835\n"); -+ -+ np = of_find_node_by_path("/system"); -+ if (np) { -+ if (!of_property_read_u32(np, "linux,revision", &revision)) -+ seq_printf(m, "Revision\t: %04x\n", revision); -+ of_node_put(np); -+ } -+ -+ np = of_find_node_by_path("/"); -+ if (np) { -+ if (!of_property_read_string(np, "serial-number", -+ &serial)) -+ seq_printf(m, "Serial\t\t: %s\n", serial); -+ if (!of_property_read_string(np, "model", -+ &model)) -+ seq_printf(m, "Model\t\t: %s\n", model); -+ of_node_put(np); -+ } -+ - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0778-media-dt-bindings-Add-binding-for-the-Sony-IMX219-se.patch b/target/linux/brcm2708/patches-4.19/950-0778-media-dt-bindings-Add-binding-for-the-Sony-IMX219-se.patch deleted file mode 100644 index 5aecde540a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0778-media-dt-bindings-Add-binding-for-the-Sony-IMX219-se.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 2d8a780a994098f7c532b712abd7298e0bca5a12 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 28 Aug 2019 13:34:30 +0100 -Subject: [PATCH 778/806] media: dt-bindings: Add binding for the Sony IMX219 - sensor - -The IMX219 is an 8MPix CSI2 sensor, supporting 2 or 4 data lanes. -Document the binding for this device. - -Signed-off-by: Dave Stevenson ---- - .../devicetree/bindings/media/i2c/imx219.txt | 59 +++++++++++++++++++ - 1 file changed, 59 insertions(+) - create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/media/i2c/imx219.txt -@@ -0,0 +1,59 @@ -+* Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor -+ -+The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor with -+an active array size of 3280H x 2464V. It is programmable through I2C -+interface. The I2C address is fixed to 0x10 as per sensor data sheet. -+Image data is sent through MIPI CSI-2, which is configured as either 2 or 4 -+data lanes. -+ -+Required Properties: -+- compatible: value should be "sony,imx219" for imx219 sensor -+- reg: I2C bus address of the device -+- clocks: reference to the xclk input clock. -+- clock-names: should be "xclk". -+- DOVDD-supply: Digital I/O voltage supply, 1.8 volts -+- AVDD-supply: Analog voltage supply, 2.8 volts -+- DVDD-supply: Digital core voltage supply, 1.2 volts -+ -+Optional Properties: -+- xclr-gpios: reference to the GPIO connected to the xclr pin, if any. Must be -+ released after all supplies are applied. -+ This is an active high signal to the imx219. -+ -+The imx219 device node should contain one 'port' child node with -+an 'endpoint' subnode. For further reading on port node refer to -+Documentation/devicetree/bindings/media/video-interfaces.txt. -+ -+Endpoint node required properties for CSI-2 connection are: -+- remote-endpoint: a phandle to the bus receiver's endpoint node. -+- clock-lanes: should be set to <0> (clock lane on hardware lane 0) -+- data-lanes: should be set to <1 2>, or <1 2 3 4> (two or four lane CSI-2 -+ supported) -+ -+Example: -+ sensor@10 { -+ compatible = "sony,imx219"; -+ reg = <0x10>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&imx219_clk>; -+ clock-names = "xclk"; -+ xclr-gpios = <&gpio_sensor 0 0>; -+ DOVDD-supply = <&vgen4_reg>; /* 1.8v */ -+ AVDD-supply = <&vgen3_reg>; /* 2.8v */ -+ DVDD-supply = <&vgen2_reg>; /* 1.2v */ -+ -+ imx219_clk: camera-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24000000>; -+ }; -+ -+ port { -+ sensor_out: endpoint { -+ remote-endpoint = <&csiss_in>; -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ }; -+ }; -+ }; diff --git a/target/linux/brcm2708/patches-4.19/950-0779-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch b/target/linux/brcm2708/patches-4.19/950-0779-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch deleted file mode 100644 index be6430ea5e..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0779-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch +++ /dev/null @@ -1,1146 +0,0 @@ -From 2186344c6d83ccd169e16c048c8b43aff95545e2 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Wed, 28 Aug 2019 13:34:49 +0100 -Subject: [PATCH 779/806] media: i2c: Add driver for Sony IMX219 sensor - -Adds a driver for the 8MPix Sony IMX219 CSI2 sensor. -Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver -currently only supports 2 lanes. -8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned) -@ 30fps are currently supported. - -Signed-off-by: Dave Stevenson -Tested-by: Kieran Bingham ---- - drivers/media/i2c/Kconfig | 11 + - drivers/media/i2c/Makefile | 1 + - drivers/media/i2c/imx219.c | 1093 ++++++++++++++++++++++++++++++++++++ - 3 files changed, 1105 insertions(+) - create mode 100644 drivers/media/i2c/imx219.c - ---- a/drivers/media/i2c/Kconfig -+++ b/drivers/media/i2c/Kconfig -@@ -597,6 +597,17 @@ config VIDEO_APTINA_PLL - config VIDEO_SMIAPP_PLL - tristate - -+config VIDEO_IMX219 -+ tristate "Sony IMX219 sensor support" -+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API -+ depends on MEDIA_CAMERA_SUPPORT -+ help -+ This is a Video4Linux2 sensor driver for the Sony -+ IMX219 camera. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called imx219. -+ - config VIDEO_IMX258 - tristate "Sony IMX258 sensor support" - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API ---- a/drivers/media/i2c/Makefile -+++ b/drivers/media/i2c/Makefile -@@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o - obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o - obj-$(CONFIG_VIDEO_OV2659) += ov2659.o - obj-$(CONFIG_VIDEO_TC358743) += tc358743.o -+obj-$(CONFIG_VIDEO_IMX219) += imx219.o - obj-$(CONFIG_VIDEO_IMX258) += imx258.o - obj-$(CONFIG_VIDEO_IMX274) += imx274.o - ---- /dev/null -+++ b/drivers/media/i2c/imx219.c -@@ -0,0 +1,1093 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * A V4L2 driver for Sony IMX219 cameras. -+ * Copyright (C) 2019, Raspberry Pi (Trading) Ltd -+ * -+ * Based on Sony imx258 camera driver -+ * Copyright (C) 2018 Intel Corporation -+ * -+ * DT / fwnode changes, and regulator / GPIO control taken from ov5640.c -+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. -+ * Copyright (C) 2014-2017 Mentor Graphics Inc. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define IMX219_REG_VALUE_08BIT 1 -+#define IMX219_REG_VALUE_16BIT 2 -+ -+#define IMX219_REG_MODE_SELECT 0x0100 -+#define IMX219_MODE_STANDBY 0x00 -+#define IMX219_MODE_STREAMING 0x01 -+ -+/* Chip ID */ -+#define IMX219_REG_CHIP_ID 0x0000 -+#define IMX219_CHIP_ID 0x0219 -+ -+/* V_TIMING internal */ -+#define IMX219_REG_VTS 0x0160 -+#define IMX219_VTS_15FPS 0x0dc6 -+#define IMX219_VTS_30FPS_1080P 0x06e3 -+#define IMX219_VTS_30FPS_BINNED 0x06e3 -+#define IMX219_VTS_MAX 0xffff -+ -+/*Frame Length Line*/ -+#define IMX219_FLL_MIN 0x08a6 -+#define IMX219_FLL_MAX 0xffff -+#define IMX219_FLL_STEP 1 -+#define IMX219_FLL_DEFAULT 0x0c98 -+ -+/* HBLANK control - read only */ -+#define IMX219_PPL_DEFAULT 5352 -+ -+/* Exposure control */ -+#define IMX219_REG_EXPOSURE 0x015a -+#define IMX219_EXPOSURE_MIN 4 -+#define IMX219_EXPOSURE_STEP 1 -+#define IMX219_EXPOSURE_DEFAULT 0x640 -+#define IMX219_EXPOSURE_MAX 65535 -+ -+/* Analog gain control */ -+#define IMX219_REG_ANALOG_GAIN 0x0157 -+#define IMX219_ANA_GAIN_MIN 0 -+#define IMX219_ANA_GAIN_MAX 232 -+#define IMX219_ANA_GAIN_STEP 1 -+#define IMX219_ANA_GAIN_DEFAULT 0x0 -+ -+/* Digital gain control */ -+#define IMX219_REG_DIGITAL_GAIN 0x0158 -+#define IMX219_DGTL_GAIN_MIN 0x0100 -+#define IMX219_DGTL_GAIN_MAX 0x0fff -+#define IMX219_DGTL_GAIN_DEFAULT 0x0100 -+#define IMX219_DGTL_GAIN_STEP 1 -+ -+/* Test Pattern Control */ -+#define IMX219_REG_TEST_PATTERN 0x0600 -+#define IMX219_TEST_PATTERN_DISABLE 0 -+#define IMX219_TEST_PATTERN_SOLID_COLOR 1 -+#define IMX219_TEST_PATTERN_COLOR_BARS 2 -+#define IMX219_TEST_PATTERN_GREY_COLOR 3 -+#define IMX219_TEST_PATTERN_PN9 4 -+ -+struct imx219_reg { -+ u16 address; -+ u8 val; -+}; -+ -+struct imx219_reg_list { -+ u32 num_of_regs; -+ const struct imx219_reg *regs; -+}; -+ -+/* Mode : resolution and related config&values */ -+struct imx219_mode { -+ /* Frame width */ -+ u32 width; -+ /* Frame height */ -+ u32 height; -+ -+ /* V-timing */ -+ u32 vts_def; -+ -+ /* Default register values */ -+ struct imx219_reg_list reg_list; -+}; -+ -+/* -+ * Register sets lifted off the i2C interface from the Raspberry Pi firmware -+ * driver. -+ * 3280x2464 = mode 2, 1920x1080 = mode 1, and 1640x1232 = mode 4. -+ */ -+static const struct imx219_reg mode_3280x2464_regs[] = { -+ {0x0100, 0x00}, -+ {0x30eb, 0x0c}, -+ {0x30eb, 0x05}, -+ {0x300a, 0xff}, -+ {0x300b, 0xff}, -+ {0x30eb, 0x05}, -+ {0x30eb, 0x09}, -+ {0x0114, 0x01}, -+ {0x0128, 0x00}, -+ {0x012a, 0x18}, -+ {0x012b, 0x00}, -+ {0x0164, 0x00}, -+ {0x0165, 0x00}, -+ {0x0166, 0x0c}, -+ {0x0167, 0xcf}, -+ {0x0168, 0x00}, -+ {0x0169, 0x00}, -+ {0x016a, 0x09}, -+ {0x016b, 0x9f}, -+ {0x016c, 0x0c}, -+ {0x016d, 0xd0}, -+ {0x016e, 0x09}, -+ {0x016f, 0xa0}, -+ {0x0170, 0x01}, -+ {0x0171, 0x01}, -+ {0x0174, 0x00}, -+ {0x0175, 0x00}, -+ {0x018c, 0x0a}, -+ {0x018d, 0x0a}, -+ {0x0301, 0x05}, -+ {0x0303, 0x01}, -+ {0x0304, 0x03}, -+ {0x0305, 0x03}, -+ {0x0306, 0x00}, -+ {0x0307, 0x39}, -+ {0x0309, 0x0a}, -+ {0x030b, 0x01}, -+ {0x030c, 0x00}, -+ {0x030d, 0x72}, -+ {0x0624, 0x0c}, -+ {0x0625, 0xd0}, -+ {0x0626, 0x09}, -+ {0x0627, 0xa0}, -+ {0x455e, 0x00}, -+ {0x471e, 0x4b}, -+ {0x4767, 0x0f}, -+ {0x4750, 0x14}, -+ {0x4540, 0x00}, -+ {0x47b4, 0x14}, -+ {0x4713, 0x30}, -+ {0x478b, 0x10}, -+ {0x478f, 0x10}, -+ {0x4793, 0x10}, -+ {0x4797, 0x0e}, -+ {0x479b, 0x0e}, -+ -+ {0x0172, 0x03}, -+ {0x0162, 0x0d}, -+ {0x0163, 0x78}, -+}; -+ -+static const struct imx219_reg mode_1920_1080_regs[] = { -+ {0x0100, 0x00}, -+ {0x30eb, 0x05}, -+ {0x30eb, 0x0c}, -+ {0x300a, 0xff}, -+ {0x300b, 0xff}, -+ {0x30eb, 0x05}, -+ {0x30eb, 0x09}, -+ {0x0114, 0x01}, -+ {0x0128, 0x00}, -+ {0x012a, 0x18}, -+ {0x012b, 0x00}, -+ {0x0162, 0x0d}, -+ {0x0163, 0x78}, -+ {0x0164, 0x02}, -+ {0x0165, 0xa8}, -+ {0x0166, 0x0a}, -+ {0x0167, 0x27}, -+ {0x0168, 0x02}, -+ {0x0169, 0xb4}, -+ {0x016a, 0x06}, -+ {0x016b, 0xeb}, -+ {0x016c, 0x07}, -+ {0x016d, 0x80}, -+ {0x016e, 0x04}, -+ {0x016f, 0x38}, -+ {0x0170, 0x01}, -+ {0x0171, 0x01}, -+ {0x0174, 0x00}, -+ {0x0175, 0x00}, -+ {0x018c, 0x0a}, -+ {0x018d, 0x0a}, -+ {0x0301, 0x05}, -+ {0x0303, 0x01}, -+ {0x0304, 0x03}, -+ {0x0305, 0x03}, -+ {0x0306, 0x00}, -+ {0x0307, 0x39}, -+ {0x0309, 0x0a}, -+ {0x030b, 0x01}, -+ {0x030c, 0x00}, -+ {0x030d, 0x72}, -+ {0x455e, 0x00}, -+ {0x471e, 0x4b}, -+ {0x4767, 0x0f}, -+ {0x4750, 0x14}, -+ {0x4540, 0x00}, -+ {0x47b4, 0x14}, -+ {0x4713, 0x30}, -+ {0x478b, 0x10}, -+ {0x478f, 0x10}, -+ {0x4793, 0x10}, -+ {0x4797, 0x0e}, -+ {0x479b, 0x0e}, -+ -+ {0x0172, 0x03}, -+ {0x0162, 0x0d}, -+ {0x0163, 0x78}, -+}; -+ -+static const struct imx219_reg mode_1640_1232_regs[] = { -+ {0x30eb, 0x0c}, -+ {0x30eb, 0x05}, -+ {0x300a, 0xff}, -+ {0x300b, 0xff}, -+ {0x30eb, 0x05}, -+ {0x30eb, 0x09}, -+ {0x0114, 0x01}, -+ {0x0128, 0x00}, -+ {0x012a, 0x18}, -+ {0x012b, 0x00}, -+ {0x0164, 0x00}, -+ {0x0165, 0x00}, -+ {0x0166, 0x0c}, -+ {0x0167, 0xcf}, -+ {0x0168, 0x00}, -+ {0x0169, 0x00}, -+ {0x016a, 0x09}, -+ {0x016b, 0x9f}, -+ {0x016c, 0x06}, -+ {0x016d, 0x68}, -+ {0x016e, 0x04}, -+ {0x016f, 0xd0}, -+ {0x0170, 0x01}, -+ {0x0171, 0x01}, -+ {0x0174, 0x01}, -+ {0x0175, 0x01}, -+ {0x018c, 0x0a}, -+ {0x018d, 0x0a}, -+ {0x0301, 0x05}, -+ {0x0303, 0x01}, -+ {0x0304, 0x03}, -+ {0x0305, 0x03}, -+ {0x0306, 0x00}, -+ {0x0307, 0x39}, -+ {0x0309, 0x0a}, -+ {0x030b, 0x01}, -+ {0x030c, 0x00}, -+ {0x030d, 0x72}, -+ {0x455e, 0x00}, -+ {0x471e, 0x4b}, -+ {0x4767, 0x0f}, -+ {0x4750, 0x14}, -+ {0x4540, 0x00}, -+ {0x47b4, 0x14}, -+ {0x4713, 0x30}, -+ {0x478b, 0x10}, -+ {0x478f, 0x10}, -+ {0x4793, 0x10}, -+ {0x4797, 0x0e}, -+ {0x479b, 0x0e}, -+ -+ {0x0172, 0x03}, -+ {0x0162, 0x0d}, -+ {0x0163, 0x78}, -+}; -+ -+static const char * const imx219_test_pattern_menu[] = { -+ "Disabled", -+ "Color Bars", -+ "Solid Color", -+ "Grey Color Bars", -+ "PN9" -+}; -+ -+static const int imx219_test_pattern_val[] = { -+ IMX219_TEST_PATTERN_DISABLE, -+ IMX219_TEST_PATTERN_COLOR_BARS, -+ IMX219_TEST_PATTERN_SOLID_COLOR, -+ IMX219_TEST_PATTERN_GREY_COLOR, -+ IMX219_TEST_PATTERN_PN9, -+}; -+ -+/* regulator supplies */ -+static const char * const imx219_supply_name[] = { -+ /* Supplies can be enabled in any order */ -+ "VANA", /* Analog (2.8V) supply */ -+ "VDIG", /* Digital Core (1.8V) supply */ -+ "VDDL", /* IF (1.2V) supply */ -+}; -+ -+#define IMX219_NUM_SUPPLIES ARRAY_SIZE(imx219_supply_name) -+ -+#define IMX219_XCLR_DELAY_MS 10 /* Initialisation delay after XCLR low->high */ -+ -+/* Mode configs */ -+static const struct imx219_mode supported_modes[] = { -+ { -+ /* 8MPix 15fps mode */ -+ .width = 3280, -+ .height = 2464, -+ .vts_def = IMX219_VTS_15FPS, -+ .reg_list = { -+ .num_of_regs = ARRAY_SIZE(mode_3280x2464_regs), -+ .regs = mode_3280x2464_regs, -+ }, -+ }, -+ { -+ /* 1080P 30fps cropped */ -+ .width = 1920, -+ .height = 1080, -+ .vts_def = IMX219_VTS_30FPS_1080P, -+ .reg_list = { -+ .num_of_regs = ARRAY_SIZE(mode_1920_1080_regs), -+ .regs = mode_1920_1080_regs, -+ }, -+ }, -+ { -+ /* 2x2 binned 30fps mode */ -+ .width = 1640, -+ .height = 1232, -+ .vts_def = IMX219_VTS_30FPS_BINNED, -+ .reg_list = { -+ .num_of_regs = ARRAY_SIZE(mode_1640_1232_regs), -+ .regs = mode_1640_1232_regs, -+ }, -+ }, -+}; -+ -+struct imx219 { -+ struct v4l2_subdev sd; -+ struct media_pad pad; -+ -+ struct v4l2_fwnode_endpoint ep; /* the parsed DT endpoint info */ -+ struct clk *xclk; /* system clock to IMX219 */ -+ u32 xclk_freq; -+ -+ struct gpio_desc *xclr_gpio; -+ struct regulator_bulk_data supplies[IMX219_NUM_SUPPLIES]; -+ -+ struct v4l2_ctrl_handler ctrl_handler; -+ /* V4L2 Controls */ -+ struct v4l2_ctrl *pixel_rate; -+ struct v4l2_ctrl *exposure; -+ -+ /* Current mode */ -+ const struct imx219_mode *mode; -+ -+ /* -+ * Mutex for serialized access: -+ * Protect sensor module set pad format and start/stop streaming safely. -+ */ -+ struct mutex mutex; -+ -+ int power_count; -+ /* Streaming on/off */ -+ bool streaming; -+}; -+ -+static inline struct imx219 *to_imx219(struct v4l2_subdev *_sd) -+{ -+ return container_of(_sd, struct imx219, sd); -+} -+ -+/* Read registers up to 2 at a time */ -+static int imx219_read_reg(struct imx219 *imx219, u16 reg, u32 len, u32 *val) -+{ -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ struct i2c_msg msgs[2]; -+ u8 addr_buf[2] = { reg >> 8, reg & 0xff }; -+ u8 data_buf[4] = { 0, }; -+ int ret; -+ -+ if (len > 4) -+ return -EINVAL; -+ -+ /* Write register address */ -+ msgs[0].addr = client->addr; -+ msgs[0].flags = 0; -+ msgs[0].len = ARRAY_SIZE(addr_buf); -+ msgs[0].buf = addr_buf; -+ -+ /* Read data from register */ -+ msgs[1].addr = client->addr; -+ msgs[1].flags = I2C_M_RD; -+ msgs[1].len = len; -+ msgs[1].buf = &data_buf[4 - len]; -+ -+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); -+ if (ret != ARRAY_SIZE(msgs)) -+ return -EIO; -+ -+ *val = get_unaligned_be32(data_buf); -+ -+ return 0; -+} -+ -+/* Write registers up to 2 at a time */ -+static int imx219_write_reg(struct imx219 *imx219, u16 reg, u32 len, u32 val) -+{ -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ u8 buf[6]; -+ -+ if (len > 4) -+ return -EINVAL; -+ -+ put_unaligned_be16(reg, buf); -+ put_unaligned_be32(val << (8 * (4 - len)), buf + 2); -+ if (i2c_master_send(client, buf, len + 2) != len + 2) -+ return -EIO; -+ -+ return 0; -+} -+ -+/* Write a list of registers */ -+static int imx219_write_regs(struct imx219 *imx219, -+ const struct imx219_reg *regs, u32 len) -+{ -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ unsigned int i; -+ int ret; -+ -+ for (i = 0; i < len; i++) { -+ ret = imx219_write_reg(imx219, regs[i].address, 1, regs[i].val); -+ if (ret) { -+ dev_err_ratelimited(&client->dev, -+ "Failed to write reg 0x%4.4x. error = %d\n", -+ regs[i].address, ret); -+ -+ return ret; -+ } -+ } -+ -+ return 0; -+} -+ -+/* Power/clock management functions */ -+static void imx219_power(struct imx219 *imx219, bool enable) -+{ -+ gpiod_set_value_cansleep(imx219->xclr_gpio, enable ? 1 : 0); -+} -+ -+static int imx219_set_power_on(struct imx219 *imx219) -+{ -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ int ret; -+ -+ ret = clk_prepare_enable(imx219->xclk); -+ if (ret) { -+ dev_err(&client->dev, "%s: failed to enable clock\n", -+ __func__); -+ return ret; -+ } -+ -+ ret = regulator_bulk_enable(IMX219_NUM_SUPPLIES, -+ imx219->supplies); -+ if (ret) { -+ dev_err(&client->dev, "%s: failed to enable regulators\n", -+ __func__); -+ goto xclk_off; -+ } -+ -+ imx219_power(imx219, true); -+ msleep(IMX219_XCLR_DELAY_MS); -+ -+ return 0; -+xclk_off: -+ clk_disable_unprepare(imx219->xclk); -+ return ret; -+} -+ -+static void imx219_set_power_off(struct imx219 *imx219) -+{ -+ imx219_power(imx219, false); -+ regulator_bulk_disable(IMX219_NUM_SUPPLIES, imx219->supplies); -+ clk_disable_unprepare(imx219->xclk); -+} -+ -+static int imx219_set_power(struct imx219 *imx219, bool on) -+{ -+ int ret = 0; -+ -+ if (on) { -+ ret = imx219_set_power_on(imx219); -+ if (ret) -+ return ret; -+ } else { -+ imx219_set_power_off(imx219); -+ } -+ -+ return 0; -+} -+ -+/* Open sub-device */ -+static int imx219_s_power(struct v4l2_subdev *sd, int on) -+{ -+ struct imx219 *imx219 = to_imx219(sd); -+ int ret = 0; -+ -+ mutex_lock(&imx219->mutex); -+ -+ /* -+ * If the power count is modified from 0 to != 0 or from != 0 to 0, -+ * update the power state. -+ */ -+ if (imx219->power_count == !on) { -+ ret = imx219_set_power(imx219, !!on); -+ if (ret) -+ goto out; -+ } -+ -+ /* Update the power count. */ -+ imx219->power_count += on ? 1 : -1; -+ WARN_ON(imx219->power_count < 0); -+out: -+ mutex_unlock(&imx219->mutex); -+ -+ return ret; -+} -+ -+static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) -+{ -+ struct v4l2_mbus_framefmt *try_fmt = -+ v4l2_subdev_get_try_format(sd, fh->pad, 0); -+ -+ /* Initialize try_fmt */ -+ try_fmt->width = supported_modes[0].width; -+ try_fmt->height = supported_modes[0].height; -+ try_fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10; -+ try_fmt->field = V4L2_FIELD_NONE; -+ -+ return 0; -+} -+ -+static int imx219_set_ctrl(struct v4l2_ctrl *ctrl) -+{ -+ struct imx219 *imx219 = -+ container_of(ctrl->handler, struct imx219, ctrl_handler); -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ int ret = 0; -+ -+ /* -+ * Applying V4L2 control value only happens -+ * when power is up for streaming -+ */ -+ if (pm_runtime_get_if_in_use(&client->dev) == 0) -+ return 0; -+ -+ switch (ctrl->id) { -+ case V4L2_CID_ANALOGUE_GAIN: -+ ret = imx219_write_reg(imx219, IMX219_REG_ANALOG_GAIN, -+ IMX219_REG_VALUE_08BIT, ctrl->val); -+ break; -+ case V4L2_CID_EXPOSURE: -+ ret = imx219_write_reg(imx219, IMX219_REG_EXPOSURE, -+ IMX219_REG_VALUE_16BIT, ctrl->val); -+ break; -+ case V4L2_CID_DIGITAL_GAIN: -+ ret = imx219_write_reg(imx219, IMX219_REG_DIGITAL_GAIN, -+ IMX219_REG_VALUE_16BIT, ctrl->val); -+ break; -+ case V4L2_CID_TEST_PATTERN: -+ ret = imx219_write_reg(imx219, IMX219_REG_TEST_PATTERN, -+ IMX219_REG_VALUE_16BIT, -+ imx219_test_pattern_val[ctrl->val]); -+ break; -+ default: -+ dev_info(&client->dev, -+ "ctrl(id:0x%x,val:0x%x) is not handled\n", -+ ctrl->id, ctrl->val); -+ ret = -EINVAL; -+ break; -+ } -+ -+ pm_runtime_put(&client->dev); -+ -+ return ret; -+} -+ -+static const struct v4l2_ctrl_ops imx219_ctrl_ops = { -+ .s_ctrl = imx219_set_ctrl, -+}; -+ -+static int imx219_enum_mbus_code(struct v4l2_subdev *sd, -+ struct v4l2_subdev_pad_config *cfg, -+ struct v4l2_subdev_mbus_code_enum *code) -+{ -+ /* Only one bayer order(GRBG) is supported */ -+ if (code->index > 0) -+ return -EINVAL; -+ -+ code->code = MEDIA_BUS_FMT_SBGGR10_1X10; -+ -+ return 0; -+} -+ -+static int imx219_enum_frame_size(struct v4l2_subdev *sd, -+ struct v4l2_subdev_pad_config *cfg, -+ struct v4l2_subdev_frame_size_enum *fse) -+{ -+ if (fse->index >= ARRAY_SIZE(supported_modes)) -+ return -EINVAL; -+ -+ if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10) -+ return -EINVAL; -+ -+ fse->min_width = supported_modes[fse->index].width; -+ fse->max_width = fse->min_width; -+ fse->min_height = supported_modes[fse->index].height; -+ fse->max_height = fse->min_height; -+ -+ return 0; -+} -+ -+static void imx219_update_pad_format(const struct imx219_mode *mode, -+ struct v4l2_subdev_format *fmt) -+{ -+ fmt->format.width = mode->width; -+ fmt->format.height = mode->height; -+ fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10; -+ fmt->format.field = V4L2_FIELD_NONE; -+} -+ -+static int __imx219_get_pad_format(struct imx219 *imx219, -+ struct v4l2_subdev_pad_config *cfg, -+ struct v4l2_subdev_format *fmt) -+{ -+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) -+ fmt->format = *v4l2_subdev_get_try_format(&imx219->sd, cfg, -+ fmt->pad); -+ else -+ imx219_update_pad_format(imx219->mode, fmt); -+ -+ return 0; -+} -+ -+static int imx219_get_pad_format(struct v4l2_subdev *sd, -+ struct v4l2_subdev_pad_config *cfg, -+ struct v4l2_subdev_format *fmt) -+{ -+ struct imx219 *imx219 = to_imx219(sd); -+ int ret; -+ -+ mutex_lock(&imx219->mutex); -+ ret = __imx219_get_pad_format(imx219, cfg, fmt); -+ mutex_unlock(&imx219->mutex); -+ -+ return ret; -+} -+ -+static int imx219_set_pad_format(struct v4l2_subdev *sd, -+ struct v4l2_subdev_pad_config *cfg, -+ struct v4l2_subdev_format *fmt) -+{ -+ struct imx219 *imx219 = to_imx219(sd); -+ const struct imx219_mode *mode; -+ struct v4l2_mbus_framefmt *framefmt; -+ -+ mutex_lock(&imx219->mutex); -+ -+ /* Only one raw bayer(BGGR) order is supported */ -+ fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10; -+ -+ mode = v4l2_find_nearest_size(supported_modes, -+ ARRAY_SIZE(supported_modes), -+ width, height, -+ fmt->format.width, fmt->format.height); -+ imx219_update_pad_format(mode, fmt); -+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { -+ framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); -+ *framefmt = fmt->format; -+ } else { -+ imx219->mode = mode; -+ } -+ -+ mutex_unlock(&imx219->mutex); -+ -+ return 0; -+} -+ -+/* Start streaming */ -+static int imx219_start_streaming(struct imx219 *imx219) -+{ -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ const struct imx219_reg_list *reg_list; -+ int ret; -+ -+ /* Apply default values of current mode */ -+ reg_list = &imx219->mode->reg_list; -+ ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs); -+ if (ret) { -+ dev_err(&client->dev, "%s failed to set mode\n", __func__); -+ return ret; -+ } -+ -+ /* -+ * Set VTS appropriately for frame rate control. -+ * Currently fixed per mode. -+ */ -+ ret = imx219_write_reg(imx219, IMX219_REG_VTS, -+ IMX219_REG_VALUE_16BIT, imx219->mode->vts_def); -+ if (ret) -+ return ret; -+ -+ /* Apply customized values from user */ -+ ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler); -+ if (ret) -+ return ret; -+ -+ /* set stream on register */ -+ return imx219_write_reg(imx219, IMX219_REG_MODE_SELECT, -+ IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING); -+} -+ -+/* Stop streaming */ -+static int imx219_stop_streaming(struct imx219 *imx219) -+{ -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ int ret; -+ -+ /* set stream off register */ -+ ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT, -+ IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY); -+ if (ret) -+ dev_err(&client->dev, "%s failed to set stream\n", __func__); -+ -+ /* -+ * Return success even if it was an error, as there is nothing the -+ * caller can do about it. -+ */ -+ return 0; -+} -+ -+static int imx219_set_stream(struct v4l2_subdev *sd, int enable) -+{ -+ struct imx219 *imx219 = to_imx219(sd); -+ struct i2c_client *client = v4l2_get_subdevdata(sd); -+ int ret = 0; -+ -+ mutex_lock(&imx219->mutex); -+ if (imx219->streaming == enable) { -+ mutex_unlock(&imx219->mutex); -+ return 0; -+ } -+ -+ if (enable) { -+ ret = pm_runtime_get_sync(&client->dev); -+ if (ret < 0) { -+ pm_runtime_put_noidle(&client->dev); -+ goto err_unlock; -+ } -+ -+ /* -+ * Apply default & customized values -+ * and then start streaming. -+ */ -+ ret = imx219_start_streaming(imx219); -+ if (ret) { -+ pm_runtime_put(&client->dev); -+ goto err_unlock; -+ } -+ } else { -+ imx219_stop_streaming(imx219); -+ pm_runtime_put(&client->dev); -+ } -+ -+ imx219->streaming = enable; -+ mutex_unlock(&imx219->mutex); -+ -+ return ret; -+ -+err_unlock: -+ mutex_unlock(&imx219->mutex); -+ -+ return ret; -+} -+ -+static int __maybe_unused imx219_suspend(struct device *dev) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct v4l2_subdev *sd = i2c_get_clientdata(client); -+ struct imx219 *imx219 = to_imx219(sd); -+ -+ if (imx219->streaming) -+ imx219_stop_streaming(imx219); -+ -+ return 0; -+} -+ -+static int __maybe_unused imx219_resume(struct device *dev) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct v4l2_subdev *sd = i2c_get_clientdata(client); -+ struct imx219 *imx219 = to_imx219(sd); -+ int ret; -+ -+ if (imx219->streaming) { -+ ret = imx219_start_streaming(imx219); -+ if (ret) -+ goto error; -+ } -+ -+ return 0; -+ -+error: -+ imx219_stop_streaming(imx219); -+ imx219->streaming = 0; -+ return ret; -+} -+ -+static int imx219_get_regulators(struct imx219 *imx219) -+{ -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ int i; -+ -+ for (i = 0; i < IMX219_NUM_SUPPLIES; i++) -+ imx219->supplies[i].supply = imx219_supply_name[i]; -+ -+ return devm_regulator_bulk_get(&client->dev, -+ IMX219_NUM_SUPPLIES, -+ imx219->supplies); -+} -+ -+/* Verify chip ID */ -+static int imx219_identify_module(struct imx219 *imx219) -+{ -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ int ret; -+ u32 val; -+ -+ ret = imx219_set_power_on(imx219); -+ if (ret) -+ return ret; -+ -+ ret = imx219_read_reg(imx219, IMX219_REG_CHIP_ID, -+ IMX219_REG_VALUE_16BIT, &val); -+ if (ret) { -+ dev_err(&client->dev, "failed to read chip id %x\n", -+ IMX219_CHIP_ID); -+ goto power_off; -+ } -+ -+ if (val != IMX219_CHIP_ID) { -+ dev_err(&client->dev, "chip id mismatch: %x!=%x\n", -+ IMX219_CHIP_ID, val); -+ ret = -EIO; -+ } -+ -+power_off: -+ imx219_set_power_off(imx219); -+ return ret; -+} -+ -+static const struct v4l2_subdev_core_ops imx219_core_ops = { -+ .s_power = imx219_s_power, -+}; -+ -+static const struct v4l2_subdev_video_ops imx219_video_ops = { -+ .s_stream = imx219_set_stream, -+}; -+ -+static const struct v4l2_subdev_pad_ops imx219_pad_ops = { -+ .enum_mbus_code = imx219_enum_mbus_code, -+ .get_fmt = imx219_get_pad_format, -+ .set_fmt = imx219_set_pad_format, -+ .enum_frame_size = imx219_enum_frame_size, -+}; -+ -+static const struct v4l2_subdev_ops imx219_subdev_ops = { -+ .core = &imx219_core_ops, -+ .video = &imx219_video_ops, -+ .pad = &imx219_pad_ops, -+}; -+ -+static const struct v4l2_subdev_internal_ops imx219_internal_ops = { -+ .open = imx219_open, -+}; -+ -+/* Initialize control handlers */ -+static int imx219_init_controls(struct imx219 *imx219) -+{ -+ struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); -+ struct v4l2_ctrl_handler *ctrl_hdlr; -+ int ret; -+ -+ ctrl_hdlr = &imx219->ctrl_handler; -+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8); -+ if (ret) -+ return ret; -+ -+ mutex_init(&imx219->mutex); -+ ctrl_hdlr->lock = &imx219->mutex; -+ -+ imx219->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, -+ V4L2_CID_EXPOSURE, -+ IMX219_EXPOSURE_MIN, -+ IMX219_EXPOSURE_MAX, -+ IMX219_EXPOSURE_STEP, -+ IMX219_EXPOSURE_DEFAULT); -+ -+ v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, -+ IMX219_ANA_GAIN_MIN, IMX219_ANA_GAIN_MAX, -+ IMX219_ANA_GAIN_STEP, IMX219_ANA_GAIN_DEFAULT); -+ -+ v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_DIGITAL_GAIN, -+ IMX219_DGTL_GAIN_MIN, IMX219_DGTL_GAIN_MAX, -+ IMX219_DGTL_GAIN_STEP, IMX219_DGTL_GAIN_DEFAULT); -+ -+ v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx219_ctrl_ops, -+ V4L2_CID_TEST_PATTERN, -+ ARRAY_SIZE(imx219_test_pattern_menu) - 1, -+ 0, 0, imx219_test_pattern_menu); -+ -+ if (ctrl_hdlr->error) { -+ ret = ctrl_hdlr->error; -+ dev_err(&client->dev, "%s control init failed (%d)\n", -+ __func__, ret); -+ goto error; -+ } -+ -+ imx219->sd.ctrl_handler = ctrl_hdlr; -+ -+ return 0; -+ -+error: -+ v4l2_ctrl_handler_free(ctrl_hdlr); -+ mutex_destroy(&imx219->mutex); -+ -+ return ret; -+} -+ -+static void imx219_free_controls(struct imx219 *imx219) -+{ -+ v4l2_ctrl_handler_free(imx219->sd.ctrl_handler); -+ mutex_destroy(&imx219->mutex); -+} -+ -+static int imx219_probe(struct i2c_client *client, -+ const struct i2c_device_id *id) -+{ -+ struct device *dev = &client->dev; -+ struct fwnode_handle *endpoint; -+ struct imx219 *imx219; -+ int ret; -+ -+ imx219 = devm_kzalloc(&client->dev, sizeof(*imx219), GFP_KERNEL); -+ if (!imx219) -+ return -ENOMEM; -+ -+ /* Initialize subdev */ -+ v4l2_i2c_subdev_init(&imx219->sd, client, &imx219_subdev_ops); -+ -+ /* Get CSI2 bus config */ -+ endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), -+ NULL); -+ if (!endpoint) { -+ dev_err(dev, "endpoint node not found\n"); -+ return -EINVAL; -+ } -+ -+ ret = v4l2_fwnode_endpoint_parse(endpoint, &imx219->ep); -+ fwnode_handle_put(endpoint); -+ if (ret) { -+ dev_err(dev, "Could not parse endpoint\n"); -+ return ret; -+ } -+ -+ /* Get system clock (xclk) */ -+ imx219->xclk = devm_clk_get(dev, "xclk"); -+ if (IS_ERR(imx219->xclk)) { -+ dev_err(dev, "failed to get xclk\n"); -+ return PTR_ERR(imx219->xclk); -+ } -+ -+ imx219->xclk_freq = clk_get_rate(imx219->xclk); -+ if (imx219->xclk_freq != 24000000) { -+ dev_err(dev, "xclk frequency not supported: %d Hz\n", -+ imx219->xclk_freq); -+ return -EINVAL; -+ } -+ -+ ret = imx219_get_regulators(imx219); -+ if (ret) -+ return ret; -+ -+ /* request optional power down pin */ -+ imx219->xclr_gpio = devm_gpiod_get_optional(dev, "xclr", -+ GPIOD_OUT_HIGH); -+ -+ /* Check module identity */ -+ ret = imx219_identify_module(imx219); -+ if (ret) -+ return ret; -+ -+ /* Set default mode to max resolution */ -+ imx219->mode = &supported_modes[0]; -+ -+ ret = imx219_init_controls(imx219); -+ if (ret) -+ return ret; -+ -+ /* Initialize subdev */ -+ imx219->sd.internal_ops = &imx219_internal_ops; -+ imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; -+ imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; -+ -+ /* Initialize source pad */ -+ imx219->pad.flags = MEDIA_PAD_FL_SOURCE; -+ -+ ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad); -+ if (ret) -+ goto error_handler_free; -+ -+ ret = v4l2_async_register_subdev_sensor_common(&imx219->sd); -+ if (ret < 0) -+ goto error_media_entity; -+ -+ pm_runtime_set_active(&client->dev); -+ pm_runtime_enable(&client->dev); -+ pm_runtime_idle(&client->dev); -+ -+ return 0; -+ -+error_media_entity: -+ media_entity_cleanup(&imx219->sd.entity); -+ -+error_handler_free: -+ imx219_free_controls(imx219); -+ -+ return ret; -+} -+ -+static int imx219_remove(struct i2c_client *client) -+{ -+ struct v4l2_subdev *sd = i2c_get_clientdata(client); -+ struct imx219 *imx219 = to_imx219(sd); -+ -+ v4l2_async_unregister_subdev(sd); -+ media_entity_cleanup(&sd->entity); -+ imx219_free_controls(imx219); -+ -+ pm_runtime_disable(&client->dev); -+ pm_runtime_set_suspended(&client->dev); -+ -+ return 0; -+} -+ -+static const struct of_device_id imx219_dt_ids[] = { -+ { .compatible = "sony,imx219" }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, imx219_dt_ids); -+ -+static struct i2c_driver imx219_i2c_driver = { -+ .driver = { -+ .name = "imx219", -+ .of_match_table = imx219_dt_ids, -+ }, -+ .probe = imx219_probe, -+ .remove = imx219_remove, -+}; -+ -+module_i2c_driver(imx219_i2c_driver); -+ -+MODULE_AUTHOR("Dave Stevenson -Date: Wed, 28 Aug 2019 13:35:19 +0100 -Subject: [PATCH 781/806] dtoverlays: Add overlay for the Sony IMX219 image - sensor. - -Adds an overlay for the IMX219 image sensor, connected to the -Unicam CSI2 receiver peripheral. - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 12 ++ - arch/arm/boot/dts/overlays/imx219-overlay.dts | 129 ++++++++++++++++++ - 3 files changed, 142 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/imx219-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -77,6 +77,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - i2c6.dtbo \ - i2s-gpio28-31.dtbo \ - ilitek251x.dtbo \ -+ imx219.dtbo \ - iqaudio-codec.dtbo \ - iqaudio-dac.dtbo \ - iqaudio-dacplus.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1269,6 +1269,18 @@ Params: interrupt GPIO use - touchscreen (in pixels) - - -+Name: imx219 -+Info: Sony IMX219 camera module. -+ Uses Unicam 1, which is the standard camera connector on most Pi -+ variants. -+Load: dtoverlay=imx219,= -+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ -+ - Name: iqaudio-codec - Info: Configures the IQaudio Codec audio card - Load: dtoverlay=iqaudio-codec ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/imx219-overlay.dts -@@ -0,0 +1,129 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for IMX219 camera module on VC I2C bus -+/dts-v1/; -+/plugin/; -+ -+#include -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ imx219: imx219@10 { -+ compatible = "sony,imx219"; -+ reg = <0x10>; -+ status = "okay"; -+ -+ clocks = <&imx219_clk>; -+ clock-names = "xclk"; -+ -+ VANA-supply = <&imx219_vana>; /* 2.8v */ -+ VDIG-supply = <&imx219_vdig>; /* 1.8v */ -+ VDDL-supply = <&imx219_vddl>; /* 1.2v */ -+ -+ imx219_clk: camera-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24000000>; -+ }; -+ -+ port { -+ imx219_0: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ clock-noncontinuous; -+ link-frequencies = -+ /bits/ 64 <297000000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&csi1>; -+ __overlay__ { -+ status = "okay"; -+ -+ port { -+ csi1_ep: endpoint { -+ remote-endpoint = <&imx219_0>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@3 { -+ target = <&i2c0_pins>; -+ __overlay__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@5 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@6 { -+ target-path="/"; -+ __overlay__ { -+ imx219_vana: fixedregulator@0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "imx219_vana"; -+ regulator-min-microvolt = <2800000>; -+ regulator-max-microvolt = <2800000>; -+ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ imx219_vdig: fixedregulator@1 { -+ compatible = "regulator-fixed"; -+ regulator-name = "imx219_vdig"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ }; -+ imx219_vddl: fixedregulator@2 { -+ compatible = "regulator-fixed"; -+ regulator-name = "imx219_vddl"; -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <1200000>; -+ }; -+ }; -+ }; -+ -+ fragment@7 { -+ target-path="/__overrides__"; -+ __overlay__ { -+ cam0-pwdn-ctrl = <&imx219_vana>,"gpio:0"; -+ cam0-pwdn = <&imx219_vana>,"gpio:4"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_pins_0_1 = <0>,"-2-3+4"; -+ i2c_pins_28_29 = <0>,"+2-3-4"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.19/950-0782-staging-bcm2835-codec-Fix-non-documentation-comment-.patch b/target/linux/brcm2708/patches-4.19/950-0782-staging-bcm2835-codec-Fix-non-documentation-comment-.patch deleted file mode 100644 index 2f9cc38d01..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0782-staging-bcm2835-codec-Fix-non-documentation-comment-.patch +++ /dev/null @@ -1,27 +0,0 @@ -From d4fc8b1d50522b416baeb1d1f5e5498000af5a7f Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Sun, 28 Apr 2019 12:15:35 +0200 -Subject: [PATCH 782/806] staging: bcm2835-codec: Fix non-documentation comment - block - -The job_ready comment is incorrectly using the documentation prefix -(/**) which causes a warning at build time. - -Simplify it. - -Signed-off-by: Kieran Bingham ---- - .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -557,7 +557,7 @@ static struct vchiq_mmal_port *get_port_ - * mem2mem callbacks - */ - --/** -+/* - * job_ready() - check whether an instance is ready to be scheduled to run - */ - static int job_ready(void *priv) diff --git a/target/linux/brcm2708/patches-4.19/950-0783-staging-bcm2835-codec-Fix-declaration-of-roles.patch b/target/linux/brcm2708/patches-4.19/950-0783-staging-bcm2835-codec-Fix-declaration-of-roles.patch deleted file mode 100644 index 98bc159bc7..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0783-staging-bcm2835-codec-Fix-declaration-of-roles.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 2d17824e8e5b2b6a6b830b8fe26c71a7d396f760 Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Wed, 20 Mar 2019 11:42:39 +0000 -Subject: [PATCH 783/806] staging: bcm2835-codec: Fix declaration of roles - -The static role text is declared incorrectly. The static should be -first, and the roles should also be constified. - -Convert from "const static char *" to "static const char * const". - -Signed-off-by: Kieran Bingham ---- - .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -77,7 +77,7 @@ enum bcm2835_codec_role { - ISP, - }; - --const static char *roles[] = { -+static const char * const roles[] = { - "decode", - "encode", - "isp" diff --git a/target/linux/brcm2708/patches-4.19/950-0784-staging-bcm2835-codec-Add-role-to-device-name.patch b/target/linux/brcm2708/patches-4.19/950-0784-staging-bcm2835-codec-Add-role-to-device-name.patch deleted file mode 100644 index de7263ba64..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0784-staging-bcm2835-codec-Add-role-to-device-name.patch +++ /dev/null @@ -1,45 +0,0 @@ -From ca613ed735fc52e68189d2ad0880f1007b931d78 Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Wed, 20 Mar 2019 11:55:43 +0000 -Subject: [PATCH 784/806] staging: bcm2835-codec: Add role to device name - -Three entities are created, Decode, Encode and ISP but all of the video -nodes use the same video name string "bcm2835-codec" which makes it -difficult to identify each role. - -Append the role-name to the video name to facilitate identifying a -specific instance from userspace. - -The Card-Type is also extended with the role name to support identifying -the device context from within QUERY_CAP operations. - -Signed-off-by: Kieran Bingham ---- - .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -947,8 +947,10 @@ static void device_run(void *priv) - static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) - { -+ struct bcm2835_codec_dev *dev = video_drvdata(file); -+ - strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); -- strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); -+ strncpy(cap->card, dev->vfd.name, sizeof(cap->card) - 1); - snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", - MEM2MEM_NAME); - return 0; -@@ -2657,8 +2659,8 @@ static int bcm2835_codec_create(struct p - } - - video_set_drvdata(vfd, dev); -- snprintf(vfd->name, sizeof(vfd->name), "%s", -- bcm2835_codec_videodev.name); -+ snprintf(vfd->name, sizeof(vfd->name), "%s-%s", -+ bcm2835_codec_videodev.name, roles[role]); - v4l2_info(&dev->v4l2_dev, "Device registered as /dev/video%d\n", - vfd->num); - diff --git a/target/linux/brcm2708/patches-4.19/950-0785-staging-bcm2835-codec-Pass-driver-context-to-create-.patch b/target/linux/brcm2708/patches-4.19/950-0785-staging-bcm2835-codec-Pass-driver-context-to-create-.patch deleted file mode 100644 index 514d1cc731..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0785-staging-bcm2835-codec-Pass-driver-context-to-create-.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 9243f7de67345adfcac52198f78bd12cfebb6867 Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Wed, 20 Mar 2019 11:35:26 +0000 -Subject: [PATCH 785/806] staging: bcm2835-codec: Pass driver context to create - entities - -Pass the bcm2835_codec_driver driver context directly into the -bcm2835_codec_create() so that it can be used to store driver global -state. Pass the struct platform_device *pdev by adding it to the driver -global state. - -Signed-off-by: Kieran Bingham ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 13 +++++++++---- - 1 file changed, 9 insertions(+), 4 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -457,6 +457,8 @@ struct bcm2835_codec_ctx { - }; - - struct bcm2835_codec_driver { -+ struct platform_device *pdev; -+ - struct bcm2835_codec_dev *encode; - struct bcm2835_codec_dev *decode; - struct bcm2835_codec_dev *isp; -@@ -2587,10 +2589,11 @@ destroy_component: - return ret; - } - --static int bcm2835_codec_create(struct platform_device *pdev, -+static int bcm2835_codec_create(struct bcm2835_codec_driver *drv, - struct bcm2835_codec_dev **new_dev, - enum bcm2835_codec_role role) - { -+ struct platform_device *pdev = drv->pdev; - struct bcm2835_codec_dev *dev; - struct video_device *vfd; - int video_nr; -@@ -2711,15 +2714,17 @@ static int bcm2835_codec_probe(struct pl - if (!drv) - return -ENOMEM; - -- ret = bcm2835_codec_create(pdev, &drv->decode, DECODE); -+ drv->pdev = pdev; -+ -+ ret = bcm2835_codec_create(drv, &drv->decode, DECODE); - if (ret) - goto out; - -- ret = bcm2835_codec_create(pdev, &drv->encode, ENCODE); -+ ret = bcm2835_codec_create(drv, &drv->encode, ENCODE); - if (ret) - goto out; - -- ret = bcm2835_codec_create(pdev, &drv->isp, ISP); -+ ret = bcm2835_codec_create(drv, &drv->isp, ISP); - if (ret) - goto out; - diff --git a/target/linux/brcm2708/patches-4.19/950-0786-staging-bcm2835-codec-add-media-controller-support.patch b/target/linux/brcm2708/patches-4.19/950-0786-staging-bcm2835-codec-add-media-controller-support.patch deleted file mode 100644 index c910bf1a87..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0786-staging-bcm2835-codec-add-media-controller-support.patch +++ /dev/null @@ -1,163 +0,0 @@ -From d1ceb85b7c6c7c3eec8b424e0172c29e93a570f2 Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Wed, 20 Mar 2019 12:54:15 +0000 -Subject: [PATCH 786/806] staging: bcm2835-codec: add media controller support - -Provide a single media device to contain all of the bcm2835_codec -devices created. - -Signed-off-by: Kieran Bingham ---- - .../vc04_services/bcm2835-codec/Kconfig | 2 +- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 41 +++++++++++++++++-- - 2 files changed, 38 insertions(+), 5 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/Kconfig -+++ b/drivers/staging/vc04_services/bcm2835-codec/Kconfig -@@ -1,6 +1,6 @@ - config VIDEO_CODEC_BCM2835 - tristate "BCM2835 Video codec support" -- depends on MEDIA_SUPPORT -+ depends on MEDIA_SUPPORT && MEDIA_CONTROLLER - depends on VIDEO_V4L2 && (ARCH_BCM2835 || COMPILE_TEST) - select BCM2835_VCHIQ_MMAL - select VIDEOBUF2_DMA_CONTIG ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -458,6 +458,7 @@ struct bcm2835_codec_ctx { - - struct bcm2835_codec_driver { - struct platform_device *pdev; -+ struct media_device mdev; - - struct bcm2835_codec_dev *encode; - struct bcm2835_codec_dev *decode; -@@ -2596,6 +2597,7 @@ static int bcm2835_codec_create(struct b - struct platform_device *pdev = drv->pdev; - struct bcm2835_codec_dev *dev; - struct video_device *vfd; -+ int function; - int video_nr; - int ret; - -@@ -2615,18 +2617,21 @@ static int bcm2835_codec_create(struct b - if (ret) - goto vchiq_finalise; - -- ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); -- if (ret) -- goto vchiq_finalise; -- - atomic_set(&dev->num_inst, 0); - mutex_init(&dev->dev_mutex); - -+ /* Initialise the video device */ - dev->vfd = bcm2835_codec_videodev; -+ - vfd = &dev->vfd; - vfd->lock = &dev->dev_mutex; - vfd->v4l2_dev = &dev->v4l2_dev; - vfd->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; -+ vfd->v4l2_dev->mdev = &drv->mdev; -+ -+ ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); -+ if (ret) -+ goto vchiq_finalise; - - switch (role) { - case DECODE: -@@ -2634,11 +2639,13 @@ static int bcm2835_codec_create(struct b - v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); - v4l2_disable_ioctl(vfd, VIDIOC_S_PARM); - v4l2_disable_ioctl(vfd, VIDIOC_G_PARM); -+ function = MEDIA_ENT_F_PROC_VIDEO_DECODER; - video_nr = decode_video_nr; - break; - case ENCODE: - v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); - v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); -+ function = MEDIA_ENT_F_PROC_VIDEO_ENCODER; - video_nr = encode_video_nr; - break; - case ISP: -@@ -2648,6 +2655,7 @@ static int bcm2835_codec_create(struct b - v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); - v4l2_disable_ioctl(vfd, VIDIOC_S_PARM); - v4l2_disable_ioctl(vfd, VIDIOC_G_PARM); -+ function = MEDIA_ENT_F_PROC_VIDEO_SCALER; - video_nr = isp_video_nr; - break; - default: -@@ -2676,6 +2684,10 @@ static int bcm2835_codec_create(struct b - goto err_m2m; - } - -+ ret = v4l2_m2m_register_media_controller(dev->m2m_dev, vfd, function); -+ if (ret) -+ goto err_m2m; -+ - v4l2_info(&dev->v4l2_dev, "Loaded V4L2 %s\n", - roles[role]); - return 0; -@@ -2697,6 +2709,7 @@ static int bcm2835_codec_destroy(struct - - v4l2_info(&dev->v4l2_dev, "Removing " MEM2MEM_NAME ", %s\n", - roles[dev->role]); -+ v4l2_m2m_unregister_media_controller(dev->m2m_dev); - v4l2_m2m_release(dev->m2m_dev); - video_unregister_device(&dev->vfd); - v4l2_device_unregister(&dev->v4l2_dev); -@@ -2708,6 +2721,7 @@ static int bcm2835_codec_destroy(struct - static int bcm2835_codec_probe(struct platform_device *pdev) - { - struct bcm2835_codec_driver *drv; -+ struct media_device *mdev; - int ret = 0; - - drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); -@@ -2715,6 +2729,17 @@ static int bcm2835_codec_probe(struct pl - return -ENOMEM; - - drv->pdev = pdev; -+ mdev = &drv->mdev; -+ mdev->dev = &pdev->dev; -+ -+ strscpy(mdev->model, bcm2835_codec_videodev.name, sizeof(mdev->model)); -+ strscpy(mdev->serial, "0000", sizeof(mdev->serial)); -+ snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s", -+ pdev->name); -+ -+ /* This should return the vgencmd version information or such .. */ -+ mdev->hw_revision = 1; -+ media_device_init(mdev); - - ret = bcm2835_codec_create(drv, &drv->decode, DECODE); - if (ret) -@@ -2728,6 +2753,10 @@ static int bcm2835_codec_probe(struct pl - if (ret) - goto out; - -+ /* Register the media device node */ -+ if (media_device_register(mdev) < 0) -+ goto out; -+ - platform_set_drvdata(pdev, drv); - - return 0; -@@ -2748,12 +2777,16 @@ static int bcm2835_codec_remove(struct p - { - struct bcm2835_codec_driver *drv = platform_get_drvdata(pdev); - -+ media_device_unregister(&drv->mdev); -+ - bcm2835_codec_destroy(drv->isp); - - bcm2835_codec_destroy(drv->encode); - - bcm2835_codec_destroy(drv->decode); - -+ media_device_cleanup(&drv->mdev); -+ - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.19/950-0787-media-bcm2835-unicam-Reduce-scope-of-local-function.patch b/target/linux/brcm2708/patches-4.19/950-0787-media-bcm2835-unicam-Reduce-scope-of-local-function.patch deleted file mode 100644 index 31567c0fce..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0787-media-bcm2835-unicam-Reduce-scope-of-local-function.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 4924b7b5517c9c334cf5faa3c7a29adf9a0c0ba1 Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Wed, 28 Aug 2019 15:54:19 +0100 -Subject: [PATCH 787/806] media: bcm2835: unicam: Reduce scope of local - function - -unicam_start_rx() is not used outside of the unicam module. Its current -definition produces a compiler warning, that no function prototype -exists. - -As the function is only used within the local scope of the module, -convert it to a static function. - -Signed-off-by: Kieran Bingham ---- - drivers/media/platform/bcm2835/bcm2835-unicam.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/media/platform/bcm2835/bcm2835-unicam.c -+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c -@@ -963,7 +963,7 @@ static void unicam_cfg_image_id(struct u - } - } - --void unicam_start_rx(struct unicam_device *dev, unsigned long addr) -+static void unicam_start_rx(struct unicam_device *dev, unsigned long addr) - { - struct unicam_cfg *cfg = &dev->cfg; - int line_int_freq = dev->v_fmt.fmt.pix.height >> 2; diff --git a/target/linux/brcm2708/patches-4.19/950-0788-media-bcm2835-unicam-add-media-controller-support.patch b/target/linux/brcm2708/patches-4.19/950-0788-media-bcm2835-unicam-add-media-controller-support.patch deleted file mode 100644 index 2209841dc6..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0788-media-bcm2835-unicam-add-media-controller-support.patch +++ /dev/null @@ -1,128 +0,0 @@ -From 06cd9857f8faa63321506a75988c475906a32970 Mon Sep 17 00:00:00 2001 -From: Kieran Bingham -Date: Wed, 20 Mar 2019 12:54:47 +0000 -Subject: [PATCH 788/806] media: bcm2835: unicam: add media controller support - -Add a media controller device node to represent the Unicam device. -The attached sensor will be automatically added to the media graph by -V4L2 core. - -Signed-off-by: Kieran Bingham ---- - drivers/media/platform/bcm2835/Kconfig | 2 +- - .../media/platform/bcm2835/bcm2835-unicam.c | 46 ++++++++++++++++++- - 2 files changed, 45 insertions(+), 3 deletions(-) - ---- a/drivers/media/platform/bcm2835/Kconfig -+++ b/drivers/media/platform/bcm2835/Kconfig -@@ -2,7 +2,7 @@ - - config VIDEO_BCM2835_UNICAM - tristate "Broadcom BCM2835 Unicam video capture driver" -- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API -+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER - depends on ARCH_BCM2835 || COMPILE_TEST - select VIDEOBUF2_DMA_CONTIG - select V4L2_FWNODE ---- a/drivers/media/platform/bcm2835/bcm2835-unicam.c -+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c -@@ -314,6 +314,9 @@ struct unicam_device { - struct clk *clock; - /* V4l2 device */ - struct v4l2_device v4l2_dev; -+ struct media_device mdev; -+ struct media_pad pad; -+ - /* parent device */ - struct platform_device *pdev; - /* subdevice async Notifier */ -@@ -1912,6 +1915,8 @@ static int unicam_probe_complete(struct - unicam->v4l2_dev.ctrl_handler = NULL; - - video_set_drvdata(vdev, unicam); -+ vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT; -+ - ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); - if (ret) { - unicam_err(unicam, "Unable to register video device.\n"); -@@ -1953,6 +1958,16 @@ static int unicam_probe_complete(struct - return ret; - } - -+ ret = media_create_pad_link(&unicam->sensor->entity, 0, -+ &unicam->video_dev.entity, 0, -+ MEDIA_LNK_FL_ENABLED | -+ MEDIA_LNK_FL_IMMUTABLE); -+ if (ret) { -+ unicam_err(unicam, "Unable to create pad links.\n"); -+ video_unregister_device(&unicam->video_dev); -+ return ret; -+ } -+ - return 0; - } - -@@ -2155,18 +2170,38 @@ static int unicam_probe(struct platform_ - return -EINVAL; - } - -+ unicam->mdev.dev = &pdev->dev; -+ strscpy(unicam->mdev.model, UNICAM_MODULE_NAME, -+ sizeof(unicam->mdev.model)); -+ strscpy(unicam->mdev.serial, "", sizeof(unicam->mdev.serial)); -+ snprintf(unicam->mdev.bus_info, sizeof(unicam->mdev.bus_info), -+ "platform:%s", pdev->name); -+ unicam->mdev.hw_revision = 1; -+ -+ media_entity_pads_init(&unicam->video_dev.entity, 1, &unicam->pad); -+ media_device_init(&unicam->mdev); -+ -+ unicam->v4l2_dev.mdev = &unicam->mdev; -+ - ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev); - if (ret) { - unicam_err(unicam, - "Unable to register v4l2 device.\n"); -- return ret; -+ goto media_cleanup; -+ } -+ -+ ret = media_device_register(&unicam->mdev); -+ if (ret < 0) { -+ unicam_err(unicam, -+ "Unable to register media-controller device.\n"); -+ goto probe_out_v4l2_unregister; - } - - /* Reserve space for the controls */ - hdl = &unicam->ctrl_handler; - ret = v4l2_ctrl_handler_init(hdl, 16); - if (ret < 0) -- goto probe_out_v4l2_unregister; -+ goto media_unregister; - unicam->v4l2_dev.ctrl_handler = hdl; - - /* set the driver data in platform device */ -@@ -2185,8 +2220,13 @@ static int unicam_probe(struct platform_ - - free_hdl: - v4l2_ctrl_handler_free(hdl); -+media_unregister: -+ media_device_unregister(&unicam->mdev); - probe_out_v4l2_unregister: - v4l2_device_unregister(&unicam->v4l2_dev); -+media_cleanup: -+ media_device_cleanup(&unicam->mdev); -+ - return ret; - } - -@@ -2204,6 +2244,8 @@ static int unicam_remove(struct platform - video_unregister_device(&unicam->video_dev); - if (unicam->sensor_config) - v4l2_subdev_free_pad_config(unicam->sensor_config); -+ media_device_unregister(&unicam->mdev); -+ media_device_cleanup(&unicam->mdev); - - return 0; - } diff --git a/target/linux/brcm2708/patches-4.19/950-0789-Limit-max_req_size-under-arm64-or-any-other-platform.patch b/target/linux/brcm2708/patches-4.19/950-0789-Limit-max_req_size-under-arm64-or-any-other-platform.patch deleted file mode 100644 index 9bb869fe8a..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0789-Limit-max_req_size-under-arm64-or-any-other-platform.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 7bfcb31431f06efc233e4cc4d7ab65e10a6522cd Mon Sep 17 00:00:00 2001 -From: Yaroslav Rosomakho -Date: Fri, 23 Aug 2019 11:02:22 +0200 -Subject: [PATCH 789/806] Limit max_req_size under arm64 (or any other platform - that uses swiotlb) to prevent potential buffer overflow due to bouncing. - -Signed-off-by: Yaroslav Rosomakho ---- - drivers/mmc/host/bcm2835-mmc.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - ---- a/drivers/mmc/host/bcm2835-mmc.c -+++ b/drivers/mmc/host/bcm2835-mmc.c -@@ -38,6 +38,7 @@ - #include - #include - #include -+#include - - #include "sdhci.h" - -@@ -1374,7 +1375,10 @@ static int bcm2835_mmc_add_host(struct b - } - #endif - mmc->max_segs = 128; -- mmc->max_req_size = 524288; -+ if (swiotlb_max_segment()) -+ mmc->max_req_size = (1 << IO_TLB_SHIFT) * IO_TLB_SEGSIZE; -+ else -+ mmc->max_req_size = 524288; - mmc->max_seg_size = mmc->max_req_size; - mmc->max_blk_size = 512; - mmc->max_blk_count = 65535; diff --git a/target/linux/brcm2708/patches-4.19/950-0790-Add-missing-dma_unmap_sg-calls-to-free-relevant-swio.patch b/target/linux/brcm2708/patches-4.19/950-0790-Add-missing-dma_unmap_sg-calls-to-free-relevant-swio.patch deleted file mode 100644 index f4413c8fd9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0790-Add-missing-dma_unmap_sg-calls-to-free-relevant-swio.patch +++ /dev/null @@ -1,46 +0,0 @@ -From f8554985b77df2dac55f2d7c85e0f0cc3497a1fd Mon Sep 17 00:00:00 2001 -From: Yaroslav Rosomakho -Date: Fri, 23 Aug 2019 11:05:51 +0200 -Subject: [PATCH 790/806] Add missing dma_unmap_sg calls to free relevant - swiotlb bounce buffers. This prevents DMA leaks. - -Signed-off-by: Yaroslav Rosomakho ---- - drivers/mmc/host/bcm2835-mmc.c | 15 +++++++++------ - 1 file changed, 9 insertions(+), 6 deletions(-) - ---- a/drivers/mmc/host/bcm2835-mmc.c -+++ b/drivers/mmc/host/bcm2835-mmc.c -@@ -345,16 +345,17 @@ static void bcm2835_mmc_dma_complete(voi - - host->use_dma = false; - -- if (host->data && !(host->data->flags & MMC_DATA_WRITE)) { -- /* otherwise handled in SDHCI IRQ */ -+ if (host->data) { - dma_chan = host->dma_chan_rxtx; -- dir_data = DMA_FROM_DEVICE; -- -+ if (host->data->flags & MMC_DATA_WRITE) -+ dir_data = DMA_TO_DEVICE; -+ else -+ dir_data = DMA_FROM_DEVICE; - dma_unmap_sg(dma_chan->device->dev, - host->data->sg, host->data->sg_len, - dir_data); -- -- bcm2835_mmc_finish_data(host); -+ if (! (host->data->flags & MMC_DATA_WRITE)) -+ bcm2835_mmc_finish_data(host); - } else if (host->wait_for_dma) { - host->wait_for_dma = false; - tasklet_schedule(&host->finish_tasklet); -@@ -540,6 +541,8 @@ static void bcm2835_mmc_transfer_dma(str - spin_unlock_irqrestore(&host->lock, flags); - dmaengine_submit(desc); - dma_async_issue_pending(dma_chan); -+ } else { -+ dma_unmap_sg(dma_chan->device->dev, host->data->sg, len, dir_data); - } - - } diff --git a/target/linux/brcm2708/patches-4.19/950-0791-overlays-mcp23017-rename-the-GPIO-pins-node-with-the.patch b/target/linux/brcm2708/patches-4.19/950-0791-overlays-mcp23017-rename-the-GPIO-pins-node-with-the.patch deleted file mode 100644 index e72d775cc9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0791-overlays-mcp23017-rename-the-GPIO-pins-node-with-the.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 9802671acf4250d6541d175ba599da03cee8acc1 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 5 Sep 2019 17:36:38 +0100 -Subject: [PATCH 791/806] overlays: mcp23017: rename the GPIO pins node with - the device - -In order to allow the overlay to be loaded multiple times the -GPIO node for the interrupt line needs to be unique. -Rename it based on the MCP23017 I2C address - -https://github.com/raspberrypi/linux/issues/3207 - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -@@ -16,7 +16,7 @@ - fragment@1 { - target = <&gpio>; - __overlay__ { -- mcp23017_pins: mcp23017_pins { -+ mcp23017_pins: mcp23017_pins@20 { - brcm,pins = <4>; - brcm,function = <0>; - }; -@@ -55,7 +55,7 @@ - __overrides__ { - gpiopin = <&mcp23017_pins>,"brcm,pins:0", - <&mcp23017>,"interrupts:0"; -- addr = <&mcp23017>,"reg:0"; -+ addr = <&mcp23017>,"reg:0", <&mcp23017_pins>,"reg:0"; - mcp23008 = <0>,"=3"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.19/950-0792-overlays-mcp23017-Add-option-for-not-connecting-the-.patch b/target/linux/brcm2708/patches-4.19/950-0792-overlays-mcp23017-Add-option-for-not-connecting-the-.patch deleted file mode 100644 index f9a1208dca..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0792-overlays-mcp23017-Add-option-for-not-connecting-the-.patch +++ /dev/null @@ -1,66 +0,0 @@ -From b37ac8c50684c3517fb9c6f737e7ea444a7d7405 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 5 Sep 2019 17:41:46 +0100 -Subject: [PATCH 792/806] overlays: mcp23017: Add option for not connecting the - int GPIO - -The interrupt GPIO is optional to the driver, therefore add an -option to not configure it. - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/overlays/README | 1 + - .../boot/dts/overlays/mcp23017-overlay.dts | 21 +++++++++++++------ - 2 files changed, 16 insertions(+), 6 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1427,6 +1427,7 @@ Params: gpiopin Gpio pin - addr I2C address of the MCP23017 (default: 0x20) - - mcp23008 Configure an MCP23008 instead. -+ noints Disable the interrupt GPIO line. - - - Name: mcp23s17 ---- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -@@ -34,11 +34,6 @@ - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; -- #interrupt-cells=<2>; -- interrupt-parent = <&gpio>; -- interrupts = <4 2>; -- interrupt-controller; -- microchip,irq-mirror; - - status = "okay"; - }; -@@ -52,11 +47,25 @@ - }; - }; - -+ fragment@4 { -+ target = <&i2c1>; -+ __overlay__ { -+ mcp23017_irq: mcp@20 { -+ #interrupt-cells=<2>; -+ interrupt-parent = <&gpio>; -+ interrupts = <4 2>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ }; -+ - __overrides__ { - gpiopin = <&mcp23017_pins>,"brcm,pins:0", -- <&mcp23017>,"interrupts:0"; -+ <&mcp23017_irq>,"interrupts:0"; - addr = <&mcp23017>,"reg:0", <&mcp23017_pins>,"reg:0"; - mcp23008 = <0>,"=3"; -+ noints = <0>,"!1!4"; - }; - }; - diff --git a/target/linux/brcm2708/patches-4.19/950-0793-v4l2-Add-a-Greyworld-AWB-mode.patch b/target/linux/brcm2708/patches-4.19/950-0793-v4l2-Add-a-Greyworld-AWB-mode.patch deleted file mode 100644 index 6f8ba62b4d..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0793-v4l2-Add-a-Greyworld-AWB-mode.patch +++ /dev/null @@ -1,34 +0,0 @@ -From c8f63d006ff5f84ad629f4c06cdc9fee34fdfe3d Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 6 Sep 2019 15:04:51 +0100 -Subject: [PATCH 793/806] v4l2: Add a Greyworld AWB mode. - -Adds a simple greyworld white balance preset, mainly for use -with cameras without an IR filter (eg Raspberry Pi NoIR) - -Signed-off-by: Dave Stevenson ---- - drivers/media/v4l2-core/v4l2-ctrls.c | 1 + - include/uapi/linux/v4l2-controls.h | 1 + - 2 files changed, 2 insertions(+) - ---- a/drivers/media/v4l2-core/v4l2-ctrls.c -+++ b/drivers/media/v4l2-core/v4l2-ctrls.c -@@ -275,6 +275,7 @@ const char * const *v4l2_ctrl_get_menu(u - "Flash", - "Cloudy", - "Shade", -+ "Greyworld", - NULL, - }; - static const char * const camera_iso_sensitivity_auto[] = { ---- a/include/uapi/linux/v4l2-controls.h -+++ b/include/uapi/linux/v4l2-controls.h -@@ -815,6 +815,7 @@ enum v4l2_auto_n_preset_white_balance { - V4L2_WHITE_BALANCE_FLASH = 7, - V4L2_WHITE_BALANCE_CLOUDY = 8, - V4L2_WHITE_BALANCE_SHADE = 9, -+ V4L2_WHITE_BALANCE_GREYWORLD = 10, - }; - - #define V4L2_CID_WIDE_DYNAMIC_RANGE (V4L2_CID_CAMERA_CLASS_BASE+21) diff --git a/target/linux/brcm2708/patches-4.19/950-0794-staging-bcm2835-camera-Add-greyworld-AWB-mode.patch b/target/linux/brcm2708/patches-4.19/950-0794-staging-bcm2835-camera-Add-greyworld-AWB-mode.patch deleted file mode 100644 index 241875d67f..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0794-staging-bcm2835-camera-Add-greyworld-AWB-mode.patch +++ /dev/null @@ -1,48 +0,0 @@ -From b5ec436637af67f37efad1550945b750101527d4 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 6 Sep 2019 15:13:06 +0100 -Subject: [PATCH 794/806] staging: bcm2835-camera: Add greyworld AWB mode - -This is mainly used for the NoIR camera which has no IR -filter and can completely confuse normal AWB presets. - -Signed-off-by: Dave Stevenson ---- - drivers/staging/vc04_services/bcm2835-camera/controls.c | 8 ++++++-- - .../staging/vc04_services/vchiq-mmal/mmal-parameters.h | 1 + - 2 files changed, 7 insertions(+), 2 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-camera/controls.c -+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c -@@ -481,6 +481,10 @@ static int ctrl_set_awb_mode(struct bm28 - case V4L2_WHITE_BALANCE_SHADE: - u32_value = MMAL_PARAM_AWBMODE_SHADE; - break; -+ -+ case V4L2_WHITE_BALANCE_GREYWORLD: -+ u32_value = MMAL_PARAM_AWBMODE_GREYWORLD; -+ break; - } - - return vchiq_mmal_port_parameter_set(dev->instance, control, -@@ -1008,8 +1012,8 @@ static const struct bm2835_mmal_v4l2_ctr - { - V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, - MMAL_CONTROL_TYPE_STD_MENU, -- ~0x3ff, V4L2_WHITE_BALANCE_SHADE, V4L2_WHITE_BALANCE_AUTO, 0, -- NULL, -+ ~0x7ff, V4L2_WHITE_BALANCE_GREYWORLD, V4L2_WHITE_BALANCE_AUTO, -+ 0, NULL, - MMAL_PARAMETER_AWB_MODE, - &ctrl_set_awb_mode, - false ---- a/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h -+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h -@@ -313,6 +313,7 @@ enum mmal_parameter_awbmode { - MMAL_PARAM_AWBMODE_INCANDESCENT, - MMAL_PARAM_AWBMODE_FLASH, - MMAL_PARAM_AWBMODE_HORIZON, -+ MMAL_PARAM_AWBMODE_GREYWORLD, - }; - - enum mmal_parameter_imagefx { diff --git a/target/linux/brcm2708/patches-4.19/950-0797-PCI-brcmstb-Fix-compilation-warning.patch b/target/linux/brcm2708/patches-4.19/950-0797-PCI-brcmstb-Fix-compilation-warning.patch deleted file mode 100644 index 71a1c1ad70..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0797-PCI-brcmstb-Fix-compilation-warning.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 2245d8c6d0feaa94ca55fa8ecfe3ca9c0c05c566 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 9 Sep 2019 10:16:08 +0100 -Subject: [PATCH 797/806] PCI: brcmstb: Fix compilation warning - -Fixes: ea2c11a187c0e248343452846457b94715e04969 -Fixes: https://github.com/raspberrypi/linux/issues/3216 - -Signed-off-by: Phil Elwell ---- - drivers/pci/controller/pcie-brcmstb.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/pci/controller/pcie-brcmstb.c -+++ b/drivers/pci/controller/pcie-brcmstb.c -@@ -653,7 +653,7 @@ static int brcmstb_platform_notifier(str - ret = of_dma_configure(dev, dev->of_node, true); - if (ret) { - dev_err(dev, "of_dma_configure() failed: %d\n", ret); -- return; -+ return ret; - } - } - brcm_set_dma_ops(dev); diff --git a/target/linux/brcm2708/patches-4.19/950-0798-drm-vc4-Fix-for-margins-in-composite-SDTV-mode-3223.patch b/target/linux/brcm2708/patches-4.19/950-0798-drm-vc4-Fix-for-margins-in-composite-SDTV-mode-3223.patch deleted file mode 100644 index 7f7d3d2334..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0798-drm-vc4-Fix-for-margins-in-composite-SDTV-mode-3223.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 1e37bc9f0ea83fa4b3f1714b4382edb7b256a251 Mon Sep 17 00:00:00 2001 -From: James Hughes -Date: Wed, 11 Sep 2019 14:57:18 +0100 -Subject: [PATCH 798/806] drm/vc4: Fix for margins in composite/SDTV mode - (#3223) - -Margins were incorrectly assumed to be setup in SDTV mode, but were -not actually done, so this make the setup non-conditional on mode. - -Signed-off-by: James Hughes ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -1588,14 +1588,9 @@ vc4_fkms_connector_init(struct drm_devic - connector->interlace_allowed = 0; - } - -- /* Create and attach TV margin props to this connector. -- * Already done for SDTV outputs. -- */ -- if (fkms_connector->display_type != DRM_MODE_ENCODER_TVDAC) { -- ret = drm_mode_create_tv_margin_properties(dev); -- if (ret) -- goto fail; -- } -+ ret = drm_mode_create_tv_margin_properties(dev); -+ if (ret) -+ goto fail; - - drm_connector_attach_tv_margin_properties(connector); - diff --git a/target/linux/brcm2708/patches-4.19/950-0799-Add-Hifiberry-DAC-DSP-soundcard-driver-3224.patch b/target/linux/brcm2708/patches-4.19/950-0799-Add-Hifiberry-DAC-DSP-soundcard-driver-3224.patch deleted file mode 100644 index 9a5ef9ceb5..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0799-Add-Hifiberry-DAC-DSP-soundcard-driver-3224.patch +++ /dev/null @@ -1,246 +0,0 @@ -From f0715f5e178f2f7c0afb719a3a35c8ac250b7586 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?J=C3=B6rg=20Schambacher?= - -Date: Thu, 12 Sep 2019 14:57:32 +0200 -Subject: [PATCH 799/806] Add Hifiberry DAC+DSP soundcard driver (#3224) - -Adds the driver for the Hifiberry DAC+DSP. It supports capture and -playback depending on the DSP firmware. - -Signed-off-by: Joerg Schambacher ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 ++ - .../overlays/hifiberry-dacplusdsp-overlay.dts | 34 +++++++ - sound/soc/bcm/Kconfig | 7 ++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/hifiberry_dacplusdsp.c | 90 +++++++++++++++++++ - sound/soc/bcm/rpi-simple-soundcard.c | 19 ++++ - 10 files changed, 162 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts - create mode 100644 sound/soc/bcm/hifiberry_dacplusdsp.c - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -54,6 +54,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - hifiberry-dacplus.dtbo \ - hifiberry-dacplusadc.dtbo \ - hifiberry-dacplusadcpro.dtbo \ -+ hifiberry-dacplusdsp.dtbo \ - hifiberry-digi.dtbo \ - hifiberry-digi-pro.dtbo \ - hy28a.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -904,6 +904,12 @@ Params: 24db_digital_gain Allow ga - master for bit clock and frame clock. - - -+Name: hifiberry-dacplusdsp -+Info: Configures the HifiBerry DAC+DSP audio card -+Load: dtoverlay=hifiberry-dacplusdsp -+Params: -+ -+ - Name: hifiberry-digi - Info: Configures the HifiBerry Digi and Digi+ audio card - Load: dtoverlay=hifiberry-digi ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts -@@ -0,0 +1,34 @@ -+// Definitions for hifiberry DAC+DSP soundcard overlay -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ dacplusdsp-codec { -+ #sound-dai-cells = <0>; -+ compatible = "hifiberry,dacplusdsp"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberrydacplusdsp,hifiberrydacplusdsp-soundcard"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -56,6 +56,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DACPLUS - help - Say Y or M if you want to add support for HifiBerry DAC+ADC PRO. - -+config SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP -+ tristate "Support for HifiBerry DAC+DSP" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_RPI_SIMPLE_SOUNDCARD -+ help -+ Say Y or M if you want to add support for HifiBerry DSP-DAC. -+ - config SND_BCM2708_SOC_HIFIBERRY_DIGI - tristate "Support for HifiBerry Digi" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -15,6 +15,7 @@ snd-soc-googlevoicehat-codec-objs := goo - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o - snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o - snd-soc-hifiberry-dacplusadcpro-objs := hifiberry_dacplusadcpro.o -+snd-soc-hifiberry-dacplusdsp-objs := hifiberry_dacplusdsp.o - snd-soc-justboom-dac-objs := justboom-dac.o - snd-soc-rpi-cirrus-objs := rpi-cirrus.o - snd-soc-rpi-proto-objs := rpi-proto.o -@@ -40,6 +41,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICE - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO) += snd-soc-hifiberry-dacplusadcpro.o -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP) += snd-soc-hifiberry-dacplusdsp.o - obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o ---- /dev/null -+++ b/sound/soc/bcm/hifiberry_dacplusdsp.c -@@ -0,0 +1,90 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * ASoC Driver for HiFiBerry DAC + DSP -+ * -+ * Author: Joerg Schambacher -+ * Copyright 2018 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+static struct snd_soc_component_driver dacplusdsp_component_driver; -+ -+static struct snd_soc_dai_driver dacplusdsp_dai = { -+ .name = "dacplusdsp-hifi", -+ .capture = { -+ .stream_name = "DAC+DSP Capture", -+ .channels_min = 2, -+ .channels_max = 2, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE | -+ SNDRV_PCM_FMTBIT_S24_LE | -+ SNDRV_PCM_FMTBIT_S32_LE, -+ }, -+ .playback = { -+ .stream_name = "DACP+DSP Playback", -+ .channels_min = 2, -+ .channels_max = 2, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE | -+ SNDRV_PCM_FMTBIT_S24_LE | -+ SNDRV_PCM_FMTBIT_S32_LE, -+ }, -+ .symmetric_rates = 1}; -+ -+#ifdef CONFIG_OF -+static const struct of_device_id dacplusdsp_ids[] = { -+ { -+ .compatible = "hifiberry,dacplusdsp", -+ }, -+ {} }; -+MODULE_DEVICE_TABLE(of, dacplusdsp_ids); -+#endif -+ -+static int dacplusdsp_platform_probe(struct platform_device *pdev) -+{ -+ int ret; -+ -+ ret = snd_soc_register_component(&pdev->dev, -+ &dacplusdsp_component_driver, &dacplusdsp_dai, 1); -+ if (ret) { -+ pr_alert("snd_soc_register_component failed\n"); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int dacplusdsp_platform_remove(struct platform_device *pdev) -+{ -+ snd_soc_unregister_component(&pdev->dev); -+ return 0; -+} -+ -+static struct platform_driver dacplusdsp_driver = { -+ .driver = { -+ .name = "hifiberry-dacplusdsp-codec", -+ .of_match_table = of_match_ptr(dacplusdsp_ids), -+ }, -+ .probe = dacplusdsp_platform_probe, -+ .remove = dacplusdsp_platform_remove, -+}; -+ -+module_platform_driver(dacplusdsp_driver); -+ -+MODULE_AUTHOR("Joerg Schambacher "); -+MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+DSP"); -+MODULE_LICENSE("GPL v2"); ---- a/sound/soc/bcm/rpi-simple-soundcard.c -+++ b/sound/soc/bcm/rpi-simple-soundcard.c -@@ -136,6 +136,23 @@ static struct snd_rpi_simple_drvdata drv - .dai = snd_googlevoicehat_soundcard_dai, - }; - -+static struct snd_soc_dai_link snd_hifiberrydacplusdsp_soundcard_dai[] = { -+{ -+ .name = "Hifiberry DAC+DSP SoundCard", -+ .stream_name = "Hifiberry DAC+DSP SoundCard HiFi", -+ .codec_dai_name = "dacplusdsp-hifi", -+ .codec_name = "dacplusdsp-codec", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | -+ SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+}, -+}; -+ -+static struct snd_rpi_simple_drvdata drvdata_hifiberrydacplusdsp = { -+ .card_name = "snd_rpi_hifiberrydacplusdsp_soundcard", -+ .dai = snd_hifiberrydacplusdsp_soundcard_dai, -+}; -+ - static struct snd_soc_dai_link snd_hifiberry_amp_dai[] = { - { - .name = "HifiBerry AMP", -@@ -193,6 +210,8 @@ static const struct of_device_id snd_rpi - .data = (void *) &drvdata_adau1977 }, - { .compatible = "googlevoicehat,googlevoicehat-soundcard", - .data = (void *) &drvdata_googlevoicehat }, -+ { .compatible = "hifiberrydacplusdsp,hifiberrydacplusdsp-soundcard", -+ .data = (void *) &drvdata_hifiberrydacplusdsp }, - { .compatible = "hifiberry,hifiberry-amp", - .data = (void *) &drvdata_hifiberry_amp }, - { .compatible = "hifiberry,hifiberry-dac", diff --git a/target/linux/brcm2708/patches-4.19/950-0800-staging-bcm2835-codec-Allow-height-of-1920.patch b/target/linux/brcm2708/patches-4.19/950-0800-staging-bcm2835-codec-Allow-height-of-1920.patch deleted file mode 100644 index 44b1ccd123..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0800-staging-bcm2835-codec-Allow-height-of-1920.patch +++ /dev/null @@ -1,27 +0,0 @@ -From b25d17959484972a6585d6e1f7cb2cfb93d1540e Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 6 Sep 2019 17:24:55 +0100 -Subject: [PATCH 800/806] staging: bcm2835-codec: Allow height of 1920. - -The codec is happy with video up to 1920 high if the width -is suitably reduced to stay within level limits. eg 1080x1920 -is OK to decode. - -Increase the height limit accordingly. - -Signed-off-by: Dave Stevenson ---- - .../staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -92,7 +92,7 @@ static const char * const components[] = - #define MIN_W 32 - #define MIN_H 32 - #define MAX_W 1920 --#define MAX_H 1088 -+#define MAX_H 1920 - #define BPL_ALIGN 32 - #define DEFAULT_WIDTH 640 - #define DEFAULT_HEIGHT 480 diff --git a/target/linux/brcm2708/patches-4.19/950-0801-staging-bcm2835-codec-Correct-g-s_selection-API-MPLA.patch b/target/linux/brcm2708/patches-4.19/950-0801-staging-bcm2835-codec-Correct-g-s_selection-API-MPLA.patch deleted file mode 100644 index 5eb5068538..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0801-staging-bcm2835-codec-Correct-g-s_selection-API-MPLA.patch +++ /dev/null @@ -1,107 +0,0 @@ -From 956fd55c1071c48f00285d82507698c501633e7a Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Fri, 13 Sep 2019 15:11:47 +0100 -Subject: [PATCH 801/806] staging: bcm2835-codec: Correct g/s_selection API - MPLANE support - -The g_selection and s_selection API is messed up and requires -the driver to expect the non-MPLANE buffer types, not the MPLANE -ones even if they are supported. The V4L2 core will convert the -MPLANE ones to non-MPLANE should they be passed in - -Fixes: 5e484a3 staging: bcm2835-codec: switch to multi-planar API -Signed-off-by: Dave Stevenson ---- - .../bcm2835-codec/bcm2835-v4l2-codec.c | 67 +++++++++++++------ - 1 file changed, 47 insertions(+), 20 deletions(-) - ---- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c -@@ -1260,17 +1260,30 @@ static int vidioc_g_selection(struct fil - { - struct bcm2835_codec_ctx *ctx = file2ctx(file); - struct bcm2835_codec_q_data *q_data; -- bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ? -- true : false; - -- if ((ctx->dev->role == DECODE && !capture_queue) || -- (ctx->dev->role == ENCODE && capture_queue)) -- /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ -- return -EINVAL; -- -- q_data = get_q_data(ctx, s->type); -- if (!q_data) -+ /* -+ * The selection API takes V4L2_BUF_TYPE_VIDEO_CAPTURE and -+ * V4L2_BUF_TYPE_VIDEO_OUTPUT, even if the device implements the MPLANE -+ * API. The V4L2 core will have converted the MPLANE variants to -+ * non-MPLANE. -+ * Open code this instead of using get_q_data in this case. -+ */ -+ switch (s->type) { -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ /* CAPTURE on encoder is not valid. */ -+ if (ctx->dev->role == ENCODE) -+ return -EINVAL; -+ q_data = &ctx->q_data[V4L2_M2M_DST]; -+ break; -+ case V4L2_BUF_TYPE_VIDEO_OUTPUT: -+ /* OUTPUT on deoder is not valid. */ -+ if (ctx->dev->role == DECODE) -+ return -EINVAL; -+ q_data = &ctx->q_data[V4L2_M2M_SRC]; -+ break; -+ default: - return -EINVAL; -+ } - - switch (ctx->dev->role) { - case DECODE: -@@ -1323,22 +1336,36 @@ static int vidioc_s_selection(struct fil - { - struct bcm2835_codec_ctx *ctx = file2ctx(file); - struct bcm2835_codec_q_data *q_data = NULL; -- bool capture_queue = s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ? -- true : false; -+ -+ /* -+ * The selection API takes V4L2_BUF_TYPE_VIDEO_CAPTURE and -+ * V4L2_BUF_TYPE_VIDEO_OUTPUT, even if the device implements the MPLANE -+ * API. The V4L2 core will have converted the MPLANE variants to -+ * non-MPLANE. -+ * -+ * Open code this instead of using get_q_data in this case. -+ */ -+ switch (s->type) { -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ /* CAPTURE on encoder is not valid. */ -+ if (ctx->dev->role == ENCODE) -+ return -EINVAL; -+ q_data = &ctx->q_data[V4L2_M2M_DST]; -+ break; -+ case V4L2_BUF_TYPE_VIDEO_OUTPUT: -+ /* OUTPUT on deoder is not valid. */ -+ if (ctx->dev->role == DECODE) -+ return -EINVAL; -+ q_data = &ctx->q_data[V4L2_M2M_SRC]; -+ break; -+ default: -+ return -EINVAL; -+ } - - v4l2_dbg(1, debug, &ctx->dev->v4l2_dev, "%s: ctx %p, type %d, q_data %p, target %d, rect x/y %d/%d, w/h %ux%u\n", - __func__, ctx, s->type, q_data, s->target, s->r.left, s->r.top, - s->r.width, s->r.height); - -- if ((ctx->dev->role == DECODE && !capture_queue) || -- (ctx->dev->role == ENCODE && capture_queue)) -- /* OUTPUT on decoder and CAPTURE on encoder are not valid. */ -- return -EINVAL; -- -- q_data = get_q_data(ctx, s->type); -- if (!q_data) -- return -EINVAL; -- - switch (ctx->dev->role) { - case DECODE: - switch (s->target) { diff --git a/target/linux/brcm2708/patches-4.19/950-0802-regulator-gpio-Allow-nonexclusive-GPIO-access.patch b/target/linux/brcm2708/patches-4.19/950-0802-regulator-gpio-Allow-nonexclusive-GPIO-access.patch deleted file mode 100644 index 6276642997..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0802-regulator-gpio-Allow-nonexclusive-GPIO-access.patch +++ /dev/null @@ -1,79 +0,0 @@ -From f6d983b7bc9ae79d0eb4dea7bc30a1ad5ff428a7 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Fri, 12 Oct 2018 14:54:12 +0200 -Subject: [PATCH 802/806] regulator/gpio: Allow nonexclusive GPIO access - -commit b0ce7b29bfcd090ddba476f45a75ec0a797b048a upstream. - -[ This is a partial cherry-pick, omitting the regulator -change which isn't required ] - -This allows nonexclusive (simultaneous) access to a single -GPIO line for the fixed regulator enable line. This happens -when several regulators use the same GPIO for enabling and -disabling a regulator, and all need a handle on their GPIO -descriptor. - -This solution with a special flag is not entirely elegant -and should ideally be replaced by something more careful as -this makes it possible for several consumers to -enable/disable the same GPIO line to the left and right -without any consistency. The current use inside the regulator -core should however be fine as it takes special care to -handle this. - -For the state of the GPIO backend, this is still the -lesser evil compared to going back to global GPIO -numbers. - -Cc: Marek Szyprowski -Cc: Jon Hunter -Fixes: efdfeb079cc3 ("regulator: fixed: Convert to use GPIO descriptor only") -Reported-by: Marek Szyprowski -Tested-by: Jon Hunter -Tested-by: Marek Szyprowski -Signed-off-by: Linus Walleij -Signed-off-by: Mark Brown ---- - drivers/gpio/gpiolib.c | 19 +++++++++++++++++-- - include/linux/gpio/consumer.h | 1 + - 2 files changed, 18 insertions(+), 2 deletions(-) - ---- a/drivers/gpio/gpiolib.c -+++ b/drivers/gpio/gpiolib.c -@@ -3979,8 +3979,23 @@ struct gpio_desc *__must_check gpiod_get - * the device name as label - */ - status = gpiod_request(desc, con_id ? con_id : devname); -- if (status < 0) -- return ERR_PTR(status); -+ if (status < 0) { -+ if (status == -EBUSY && flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE) { -+ /* -+ * This happens when there are several consumers for -+ * the same GPIO line: we just return here without -+ * further initialization. It is a bit if a hack. -+ * This is necessary to support fixed regulators. -+ * -+ * FIXME: Make this more sane and safe. -+ */ -+ dev_info(dev, "nonexclusive access to GPIO for %s\n", -+ con_id ? con_id : devname); -+ return desc; -+ } else { -+ return ERR_PTR(status); -+ } -+ } - - status = gpiod_configure_flags(desc, con_id, lookupflags, flags); - if (status < 0) { ---- a/include/linux/gpio/consumer.h -+++ b/include/linux/gpio/consumer.h -@@ -30,6 +30,7 @@ struct gpio_descs { - #define GPIOD_FLAGS_BIT_DIR_OUT BIT(1) - #define GPIOD_FLAGS_BIT_DIR_VAL BIT(2) - #define GPIOD_FLAGS_BIT_OPEN_DRAIN BIT(3) -+#define GPIOD_FLAGS_BIT_NONEXCLUSIVE BIT(4) - - /** - * Optional flags that can be passed to one of gpiod_* to configure direction diff --git a/target/linux/brcm2708/patches-4.19/950-0803-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch b/target/linux/brcm2708/patches-4.19/950-0803-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch deleted file mode 100644 index d8e87919cf..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0803-gpio-Enable-nonexclusive-gpiods-from-DT-nodes.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 76870d237adff4c8e419064e7d4f5a8ef87c1085 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Thu, 6 Dec 2018 13:43:44 +0100 -Subject: [PATCH 803/806] gpio: Enable nonexclusive gpiods from DT nodes - -commit ec757001c818c175e6b610e8ef80c2a25d1ed1a5 upstream. - -This makes gpiod_get_from_of_node() respect the -GPIOD_FLAGS_BIT_NONEXCLUSIVE flag which is especially -nice when getting regulator GPIOs right out of device -tree nodes. - -Suggested-by: Marek Szyprowski -Fixes: b0ce7b29bfcd ("regulator/gpio: Allow nonexclusive GPIO access") -Signed-off-by: Linus Walleij -Reviewed-by: Marek Szyprowski -Tested-by: Marek Szyprowski -Reviewed-by: Charles Keepax -Signed-off-by: Mark Brown ---- - drivers/gpio/gpiolib.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/gpio/gpiolib.c -+++ b/drivers/gpio/gpiolib.c -@@ -4053,6 +4053,8 @@ struct gpio_desc *gpiod_get_from_of_node - transitory = flags & OF_GPIO_TRANSITORY; - - ret = gpiod_request(desc, label); -+ if (ret == -EBUSY && (flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE)) -+ return desc; - if (ret) - return ERR_PTR(ret); - diff --git a/target/linux/brcm2708/patches-4.19/950-0804-Fix-poll-rate-on-touchscreen-3238.patch b/target/linux/brcm2708/patches-4.19/950-0804-Fix-poll-rate-on-touchscreen-3238.patch deleted file mode 100644 index 5dbbd846c9..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0804-Fix-poll-rate-on-touchscreen-3238.patch +++ /dev/null @@ -1,29 +0,0 @@ -From a37a706547897d77b3194fc507b2546197def430 Mon Sep 17 00:00:00 2001 -From: James Hughes -Date: Tue, 17 Sep 2019 16:22:09 +0100 -Subject: [PATCH 804/806] Fix poll rate on touchscreen (#3238) - -Was running at 25Hz, rather than he expected 60. Only been doing it -for the last 5 years.... - -Replace msleep_interruptible with usleep_range as the msleep call -is not accurate for times < 20ms. - -Fixes: https://github.com/raspberrypi/linux/issues/3227 - -Signed-off-by: James Hughes ---- - drivers/input/touchscreen/rpi-ft5406.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/input/touchscreen/rpi-ft5406.c -+++ b/drivers/input/touchscreen/rpi-ft5406.c -@@ -78,7 +78,7 @@ static int ft5406_thread(void *arg) - - while (!kthread_should_stop()) { - /* 60fps polling */ -- msleep_interruptible(17); -+ usleep_range(16600, 16700); - memcpy_fromio(®s, ts->ts_base, sizeof(struct ft5406_regs)); - iowrite8(99, - ts->ts_base + diff --git a/target/linux/brcm2708/patches-4.19/950-0806-dts-Add-DTS-for-Pi-2B-rev-1.2-with-BCM2837-3235.patch b/target/linux/brcm2708/patches-4.19/950-0806-dts-Add-DTS-for-Pi-2B-rev-1.2-with-BCM2837-3235.patch deleted file mode 100644 index abb9fcc300..0000000000 --- a/target/linux/brcm2708/patches-4.19/950-0806-dts-Add-DTS-for-Pi-2B-rev-1.2-with-BCM2837-3235.patch +++ /dev/null @@ -1,171 +0,0 @@ -From 75967d69ea58555d12a7d9058653a69210d2ba86 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 18 Sep 2019 09:02:10 +0100 -Subject: [PATCH 806/806] dts: Add DTS for Pi 2B rev 1.2 with BCM2837 (#3235) - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm2710-rpi-2-b.dts | 125 ++++++++++++++++++ - arch/arm64/boot/dts/broadcom/Makefile | 2 + - .../boot/dts/broadcom/bcm2710-rpi-2-b.dts | 3 + - 4 files changed, 131 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm2710-rpi-2-b.dts - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-2-b.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2708-rpi-zero.dtb \ - bcm2708-rpi-zero-w.dtb \ - bcm2709-rpi-2-b.dtb \ -+ bcm2710-rpi-2-b.dtb \ - bcm2710-rpi-3-b.dtb \ - bcm2711-rpi-4-b.dtb \ - bcm2710-rpi-3-b-plus.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts -@@ -0,0 +1,125 @@ -+/dts-v1/; -+ -+#include "bcm2710.dtsi" -+#include "bcm2709-rpi.dtsi" -+#include "bcm283x-rpi-smsc9514.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837"; -+ model = "Raspberry Pi 2 Model B rev 1.2"; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 45>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "input"; -+ gpios = <&gpio 35 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ }; -+}; ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -1,7 +1,9 @@ - # SPDX-License-Identifier: GPL-2.0 - dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb -+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-2-b.dtb - dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-2-b.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-2-b.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2710-rpi-2-b.dts"