From: Tom Lendacky Date: Wed, 23 May 2018 16:38:38 +0000 (-0500) Subject: amd-xgbe: Remove field that indicates SFP diagnostic support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=67cea0c92264a657230ba14e1956c34132ca6161;p=openwrt%2Fstaging%2Fblogic.git amd-xgbe: Remove field that indicates SFP diagnostic support The driver currently sets an indication of whether the SFP supports, and that the driver can obtain, diagnostics data. This isn't currently used by the driver and the logic to set this indicator is flawed because the field is cleared each time the SFP is checked and only set when a new SFP is detected. Remove this field and the logic supporting it. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c index 05003be89ff5..cb15cafd5209 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c @@ -343,7 +343,6 @@ struct xgbe_phy_data { unsigned int sfp_rx_los; unsigned int sfp_tx_fault; unsigned int sfp_mod_absent; - unsigned int sfp_diags; unsigned int sfp_changed; unsigned int sfp_phy_avail; unsigned int sfp_cable_len; @@ -1211,13 +1210,6 @@ static int xgbe_phy_sfp_read_eeprom(struct xgbe_prv_data *pdata) memcpy(&phy_data->sfp_eeprom, &sfp_eeprom, sizeof(sfp_eeprom)); - if (sfp_eeprom.extd[XGBE_SFP_EXTD_SFF_8472]) { - u8 diag_type = sfp_eeprom.extd[XGBE_SFP_EXTD_DIAG]; - - if (!(diag_type & XGBE_SFP_EXTD_DIAG_ADDR_CHANGE)) - phy_data->sfp_diags = 1; - } - xgbe_phy_free_phy_device(pdata); } else { phy_data->sfp_changed = 0; @@ -1267,7 +1259,6 @@ static void xgbe_phy_sfp_reset(struct xgbe_phy_data *phy_data) phy_data->sfp_rx_los = 0; phy_data->sfp_tx_fault = 0; phy_data->sfp_mod_absent = 1; - phy_data->sfp_diags = 0; phy_data->sfp_base = XGBE_SFP_BASE_UNKNOWN; phy_data->sfp_cable = XGBE_SFP_CABLE_UNKNOWN; phy_data->sfp_speed = XGBE_SFP_SPEED_UNKNOWN;