From: Michiel vd Garde Date: Fri, 27 Feb 2015 01:08:29 +0000 (+0100) Subject: USB: serial: cp210x: Adding Seletek device id's X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=675af70856d7cc026be8b6ea7a8b9db10b8b38a1;p=openwrt%2Fstaging%2Fblogic.git USB: serial: cp210x: Adding Seletek device id's These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by: Michiel van de Garde Cc: stable Signed-off-by: Johan Hovold --- diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index f40c856ff758..84ce2d74894c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -147,6 +147,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */ + { USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */ + { USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */ { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */