From: Hauke Mehrtens Date: Mon, 25 Mar 2019 14:15:57 +0000 (+0100) Subject: xburst: Remove unmaintained target X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=675832de79ec14ddc1183a66d1084aff7a856289;p=openwrt%2Fstaging%2Fxback.git xburst: Remove unmaintained target This target only supports kernel 3.18, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-xburst/Makefile b/package/boot/uboot-xburst/Makefile deleted file mode 100644 index 413289a7f9..0000000000 --- a/package/boot/uboot-xburst/Makefile +++ /dev/null @@ -1,88 +0,0 @@ -# -# Copyright (C) 2010 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=u-boot -PKG_VERSION:=2012.10-rc2 -PKG_RELEASE:=1 - -PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 -PKG_SOURCE_URL:= \ - http://mirror2.openwrt.org/sources \ - ftp://ftp.denx.de/pub/u-boot -PKG_HASH:=6d094cafa7ecea8b671fbdcd21130b6a4f5744fc47dd263e101ed5d3629dffd4 -PKG_TARGETS:=bin - -PKG_LICENSE:=GPL-2.0 GPL-2.0+ -PKG_LICENSE_FILES:=Licenses/README - -include $(INCLUDE_DIR)/package.mk - -define uboot/Default - TITLE:= - CONFIG:= - IMAGE:= -endef - -define uboot/qi_lb60 - TITLE:=U-boot for the qi_lb60 board -endef - -UBOOTS:=qi_lb60 - -define Package/uboot/template -define Package/uboot-xburst-$(1) - SECTION:=boot - CATEGORY:=Boot Loaders - DEPENDS:=@TARGET_xburst - TITLE:=$(2) - URL:=http://www.denx.de/wiki/UBoot/WebHome - VARIANT:=$(1) -endef -endef - -define BuildUbootPackage - $(eval $(uboot/Default)) - $(eval $(uboot/$(1))) - $(call Package/uboot/template,$(1),$(TITLE)) -endef - - -ifdef BUILD_VARIANT -$(eval $(call uboot/$(BUILD_VARIANT))) -UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT)) -UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin) -endif - -define Build/Configure - $(MAKE) -C $(PKG_BUILD_DIR) \ - $(UBOOT_CONFIG)_config -endef - -define Build/Compile - $(MAKE) -C $(PKG_BUILD_DIR) \ - CROSS_COMPILE=$(TARGET_CROSS) -endef - -define Package/uboot/install/template -define Package/uboot-xburst-$(1)/install - $(CP) $(PKG_BUILD_DIR)/u-boot-xburst.bin $(BIN_DIR)/$(2) - rmdir $$(1) -endef -endef - -$(foreach u,$(UBOOTS), \ - $(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.bin)) \ -) - -$(foreach u,$(UBOOTS), \ - $(eval $(call BuildUbootPackage,$(u))) \ - $(eval $(call BuildPackage,uboot-xburst-$(u))) \ -) diff --git a/package/boot/uboot-xburst/patches/0001-qi_lb60-add-nand-spl-support.patch b/package/boot/uboot-xburst/patches/0001-qi_lb60-add-nand-spl-support.patch deleted file mode 100644 index e770243528..0000000000 --- a/package/boot/uboot-xburst/patches/0001-qi_lb60-add-nand-spl-support.patch +++ /dev/null @@ -1,894 +0,0 @@ -From 0329cf7965956a5a7044827e0ce88ae8d5150e54 Mon Sep 17 00:00:00 2001 -From: Xiangfu -Date: Fri, 12 Oct 2012 09:46:58 +0800 -Subject: [PATCH 1/6] qi_lb60: add nand spl support - - The JZ4740 CPU can load 8KB from two different addresses: - 1. the normal area up to 8KB starting from NAND flash address 0x00000000 - 2. the backup area up to 8KB starting from NAND flash address 0x00002000 - -Signed-off-by: Xiangfu ---- - Makefile | 12 +++ - arch/mips/cpu/xburst/Makefile | 7 +- - arch/mips/cpu/xburst/cpu.c | 4 + - arch/mips/cpu/xburst/jz4740.c | 82 +++++++---------- - arch/mips/cpu/xburst/spl/Makefile | 47 ++++++++++ - arch/mips/cpu/xburst/spl/start.S | 63 +++++++++++++ - board/qi/qi_lb60/Makefile | 4 + - board/qi/qi_lb60/qi_lb60-spl.c | 30 +++++++ - board/qi/qi_lb60/qi_lb60.c | 8 +- - board/qi/qi_lb60/u-boot-spl.lds | 61 +++++++++++++ - drivers/mtd/nand/jz4740_nand.c | 39 ++++++++- - include/configs/qi_lb60.h | 175 ++++++++++++++++++------------------- - 12 files changed, 386 insertions(+), 146 deletions(-) - create mode 100644 arch/mips/cpu/xburst/spl/Makefile - create mode 100644 arch/mips/cpu/xburst/spl/start.S - create mode 100644 board/qi/qi_lb60/qi_lb60-spl.c - create mode 100644 board/qi/qi_lb60/u-boot-spl.lds - -diff --git a/Makefile b/Makefile -index 34d9075..a22778e 100644 ---- a/Makefile -+++ b/Makefile -@@ -393,6 +393,10 @@ ALL-y += $(obj)u-boot-nodtb-tegra.bin - endif - endif - -+ifeq ($(CPU),xburst) -+ALL-y += $(obj)u-boot-xburst.bin -+endif -+ - all: $(ALL-y) $(SUBDIR_EXAMPLES) - - $(obj)u-boot.dtb: $(obj)u-boot -@@ -506,6 +510,14 @@ $(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin - endif - endif - -+ifeq ($(CPU),xburst) -+$(obj)u-boot-xburst.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin -+ dd if=$(obj)spl/u-boot-spl.bin of=$(obj)spl/u-boot-pad.bin conv=sync bs=8192 count=1 -+ dd if=$(obj)spl/u-boot-spl.bin of=$(obj)spl/u-boot-pad.bin conv=sync,notrunc oflag=append bs=8192 count=1 -+ tr '\0' '\377' < /dev/zero | dd of=$(obj)spl/u-boot-pad.bin conv=sync,notrunc oflag=append bs=16384 count=1 -+ cat $(obj)spl/u-boot-pad.bin u-boot.bin > $@ -+endif -+ - ifeq ($(CONFIG_SANDBOX),y) - GEN_UBOOT = \ - cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \ -diff --git a/arch/mips/cpu/xburst/Makefile b/arch/mips/cpu/xburst/Makefile -index b1f2ae4..ec35e55 100644 ---- a/arch/mips/cpu/xburst/Makefile -+++ b/arch/mips/cpu/xburst/Makefile -@@ -24,9 +24,12 @@ include $(TOPDIR)/config.mk - - LIB = $(obj)lib$(CPU).o - -+COBJS-y = cpu.o jz_serial.o -+ -+ifneq ($(CONFIG_SPL_BUILD),y) - START = start.o --SOBJS-y = --COBJS-y = cpu.o timer.o jz_serial.o -+COBJS-y += timer.o -+endif - - COBJS-$(CONFIG_JZ4740) += jz4740.o - -diff --git a/arch/mips/cpu/xburst/cpu.c b/arch/mips/cpu/xburst/cpu.c -index ddcbfaa..1432838 100644 ---- a/arch/mips/cpu/xburst/cpu.c -+++ b/arch/mips/cpu/xburst/cpu.c -@@ -42,6 +42,8 @@ - : \ - : "i" (op), "R" (*(unsigned char *)(addr))) - -+#ifndef CONFIG_SPL_BUILD -+ - void __attribute__((weak)) _machine_restart(void) - { - struct jz4740_wdt *wdt = (struct jz4740_wdt *)JZ4740_WDT_BASE; -@@ -109,6 +111,8 @@ void invalidate_dcache_range(ulong start_addr, ulong stop) - cache_op(Hit_Invalidate_D, addr); - } - -+#endif -+ - void flush_icache_all(void) - { - u32 addr, t = 0; -diff --git a/arch/mips/cpu/xburst/jz4740.c b/arch/mips/cpu/xburst/jz4740.c -index c0b9817..8816aa3 100644 ---- a/arch/mips/cpu/xburst/jz4740.c -+++ b/arch/mips/cpu/xburst/jz4740.c -@@ -32,31 +32,19 @@ int disable_interrupts(void) - return 0; - } - --/* -- * PLL output clock = EXTAL * NF / (NR * NO) -- * NF = FD + 2, NR = RD + 2 -- * NO = 1 (if OD = 0), NO = 2 (if OD = 1 or 2), NO = 4 (if OD = 3) -- */ - void pll_init(void) - { - struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE; - -- register unsigned int cfcr, plcr1; -- int n2FR[33] = { -- 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0, -- 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0, -- 9 -- }; -- int div[5] = {1, 3, 3, 3, 3}; /* divisors of I:S:P:L:M */ -- int nf, pllout2; -+ register unsigned int cfcr, plcr; -+ unsigned int nf, pllout2; - - cfcr = CPM_CPCCR_CLKOEN | -- CPM_CPCCR_PCS | -- (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) | -- (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) | -- (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) | -- (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) | -- (n2FR[div[4]] << CPM_CPCCR_LDIV_BIT); -+ (0 << CPM_CPCCR_CDIV_BIT) | -+ (2 << CPM_CPCCR_HDIV_BIT) | -+ (2 << CPM_CPCCR_PDIV_BIT) | -+ (2 << CPM_CPCCR_MDIV_BIT) | -+ (2 << CPM_CPCCR_LDIV_BIT); - - pllout2 = (cfcr & CPM_CPCCR_PCS) ? - CONFIG_SYS_CPU_SPEED : (CONFIG_SYS_CPU_SPEED / 2); -@@ -65,15 +53,18 @@ void pll_init(void) - writel(pllout2 / 48000000 - 1, &cpm->uhccdr); - - nf = CONFIG_SYS_CPU_SPEED * 2 / CONFIG_SYS_EXTAL; -- plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */ -+ plcr = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */ - (0 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */ - (0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */ -- (0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */ -+ (0x32 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */ - CPM_CPPCR_PLLEN; /* enable PLL */ - - /* init PLL */ - writel(cfcr, &cpm->cpccr); -- writel(plcr1, &cpm->cppcr); -+ writel(plcr, &cpm->cppcr); -+ -+ while (!(readl(&cpm->cppcr) & CPM_CPPCR_PLLS)) -+ ; - } - - void sdram_init(void) -@@ -92,26 +83,12 @@ void sdram_init(void) - 2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */ - }; - -- int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32}; -- - cpu_clk = CONFIG_SYS_CPU_SPEED; -- mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()]; -+ mem_clk = 84000000; - - writel(0, &emc->bcr); /* Disable bus release */ - writew(0, &emc->rtcsr); /* Disable clock for counting */ - -- /* Fault DMCR value for mode register setting*/ --#define SDRAM_ROW0 11 --#define SDRAM_COL0 8 --#define SDRAM_BANK40 0 -- -- dmcr0 = ((SDRAM_ROW0 - 11) << EMC_DMCR_RA_BIT) | -- ((SDRAM_COL0 - 8) << EMC_DMCR_CA_BIT) | -- (SDRAM_BANK40 << EMC_DMCR_BA_BIT) | -- (SDRAM_BW16 << EMC_DMCR_BW_BIT) | -- EMC_DMCR_EPIN | -- cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)]; -- - /* Basic DMCR value */ - dmcr = ((SDRAM_ROW - 11) << EMC_DMCR_RA_BIT) | - ((SDRAM_COL - 8) << EMC_DMCR_CA_BIT) | -@@ -128,31 +105,31 @@ void sdram_init(void) - if (tmp > 11) - tmp = 11; - dmcr |= (tmp - 4) << EMC_DMCR_TRAS_BIT; -- tmp = SDRAM_RCD / ns; - -+ tmp = SDRAM_RCD / ns; - if (tmp > 3) - tmp = 3; - dmcr |= tmp << EMC_DMCR_RCD_BIT; -- tmp = SDRAM_TPC / ns; - -+ tmp = SDRAM_TPC / ns; - if (tmp > 7) - tmp = 7; - dmcr |= tmp << EMC_DMCR_TPC_BIT; -- tmp = SDRAM_TRWL / ns; - -+ tmp = SDRAM_TRWL / ns; - if (tmp > 3) - tmp = 3; - dmcr |= tmp << EMC_DMCR_TRWL_BIT; -- tmp = (SDRAM_TRAS + SDRAM_TPC) / ns; - -+ tmp = (SDRAM_TRAS + SDRAM_TPC) / ns; - if (tmp > 14) - tmp = 14; - dmcr |= ((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT; - - /* SDRAM mode value */ -- sdmode = EMC_SDMR_BT_SEQ | -- EMC_SDMR_OM_NORMAL | -- EMC_SDMR_BL_4 | -+ sdmode = EMC_SDMR_BT_SEQ | -+ EMC_SDMR_OM_NORMAL | -+ EMC_SDMR_BL_4 | - cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)]; - - /* Stage 1. Precharge all banks by writing SDMR with DMCR.MRSET=0 */ -@@ -172,8 +149,8 @@ void sdram_init(void) - if (tmp > 0xff) - tmp = 0xff; - writew(tmp, &emc->rtcor); -+ - writew(0, &emc->rtcnt); -- /* Divisor is 64, CKO/64 */ - writew(EMC_RTCSR_CKS_64, &emc->rtcsr); - - /* Wait for number of auto-refresh cycles */ -@@ -182,13 +159,17 @@ void sdram_init(void) - ; - - /* Stage 3. Mode Register Set */ -+ dmcr0 = (11 << EMC_DMCR_RA_BIT) | -+ (8 << EMC_DMCR_CA_BIT) | -+ (0 << EMC_DMCR_BA_BIT) | -+ EMC_DMCR_EPIN | -+ (SDRAM_BW16 << EMC_DMCR_BW_BIT) | -+ cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)]; - writel(dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr); - writeb(0, JZ4740_EMC_SDMR0 | sdmode); - - /* Set back to basic DMCR value */ - writel(dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr); -- -- /* everything is ok now */ - } - - DECLARE_GLOBAL_DATA_PTR; -@@ -232,9 +213,10 @@ void rtc_init(void) - phys_size_t initdram(int board_type) - { - struct jz4740_emc *emc = (struct jz4740_emc *)JZ4740_EMC_BASE; -- u32 dmcr; -- u32 rows, cols, dw, banks; -- ulong size; -+ -+ unsigned int dmcr; -+ unsigned int rows, cols, dw, banks; -+ unsigned long size; - - dmcr = readl(&emc->dmcr); - rows = 11 + ((dmcr & EMC_DMCR_RA_MASK) >> EMC_DMCR_RA_BIT); -diff --git a/arch/mips/cpu/xburst/spl/Makefile b/arch/mips/cpu/xburst/spl/Makefile -new file mode 100644 -index 0000000..f45e8c8 ---- /dev/null -+++ b/arch/mips/cpu/xburst/spl/Makefile -@@ -0,0 +1,47 @@ -+# -+# Copyright (C) 2011 Xiangfu Liu -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = $(obj)lib$(CPU).o -+ -+START = start.o -+SOBJS-y = -+COBJS-y = -+ -+SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) -+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) -+START := $(addprefix $(obj),$(START)) -+ -+all: $(obj).depend $(START) $(LIB) -+ -+$(LIB): $(OBJS) -+ $(call cmd_link_o_target, $(OBJS)) -+ -+######################################################################### -+ -+# defines $(obj).depend target -+include $(SRCTREE)/rules.mk -+ -+sinclude $(obj).depend -+ -+######################################################################### -diff --git a/arch/mips/cpu/xburst/spl/start.S b/arch/mips/cpu/xburst/spl/start.S -new file mode 100644 -index 0000000..e31c4c8 ---- /dev/null -+++ b/arch/mips/cpu/xburst/spl/start.S -@@ -0,0 +1,63 @@ -+/* -+ * Copyright (c) 2010 Xiangfu Liu -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 3 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+ .set noreorder -+ -+ .globl _start -+ .text -+_start: -+ .word JZ4740_NANDBOOT_CFG /* fetched during NAND Boot */ -+reset: -+ /* -+ * STATUS register -+ * CU0=UM=EXL=IE=0, BEV=ERL=1, IP2~7=1 -+ */ -+ li t0, 0x0040FC04 -+ mtc0 t0, CP0_STATUS -+ /* -+ * CAUSE register -+ * IV=1, use the specical interrupt vector (0x200) -+ */ -+ li t1, 0x00800000 -+ mtc0 t1, CP0_CAUSE -+ -+ bal 1f -+ nop -+ .word _GLOBAL_OFFSET_TABLE_ -+1: -+ move gp, ra -+ lw t1, 0(ra) -+ move gp, t1 -+ -+ la sp, 0x80004000 -+ la t9, nand_spl_boot -+ j t9 -+ nop -diff --git a/board/qi/qi_lb60/Makefile b/board/qi/qi_lb60/Makefile -index 5dae11b..e399246 100644 ---- a/board/qi/qi_lb60/Makefile -+++ b/board/qi/qi_lb60/Makefile -@@ -22,7 +22,11 @@ include $(TOPDIR)/config.mk - - LIB = $(obj)lib$(BOARD).o - -+ifeq ($(CONFIG_SPL_BUILD),y) -+COBJS := $(BOARD)-spl.o -+else - COBJS := $(BOARD).o -+endif - - SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) - OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -diff --git a/board/qi/qi_lb60/qi_lb60-spl.c b/board/qi/qi_lb60/qi_lb60-spl.c -new file mode 100644 -index 0000000..3fe3fa3 ---- /dev/null -+++ b/board/qi/qi_lb60/qi_lb60-spl.c -@@ -0,0 +1,30 @@ -+/* -+ * Authors: Xiangfu Liu -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 3 of the License, or (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+void nand_spl_boot(void) -+{ -+ __gpio_as_sdram_16bit_4720(); -+ __gpio_as_uart0(); -+ __gpio_jtag_to_uart0(); -+ -+ serial_init(); -+ -+ pll_init(); -+ sdram_init(); -+ -+ nand_init(); -+ -+ puts("\nQi LB60 SPL: Starting U-Boot ...\n"); -+ nand_boot(); -+} -diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c -index d975209..3bd4e2f 100644 ---- a/board/qi/qi_lb60/qi_lb60.c -+++ b/board/qi/qi_lb60/qi_lb60.c -@@ -1,5 +1,5 @@ - /* -- * Authors: Xiangfu Liu -+ * Authors: Xiangfu Liu - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License -@@ -97,8 +97,10 @@ int board_early_init_f(void) - /* U-Boot common routines */ - int checkboard(void) - { -- printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %ld MHz)\n", -- gd->cpu_clk / 1000000); -+ printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC)\n"); -+ printf(" CPU: %ld\n", gd->cpu_clk); -+ printf(" MEM: %ld\n", gd->mem_clk); -+ printf(" DEV: %ld\n", gd->dev_clk); - - return 0; - } -diff --git a/board/qi/qi_lb60/u-boot-spl.lds b/board/qi/qi_lb60/u-boot-spl.lds -new file mode 100644 -index 0000000..930537f ---- /dev/null -+++ b/board/qi/qi_lb60/u-boot-spl.lds -@@ -0,0 +1,61 @@ -+/* -+ * (C) Copyright 2012 Xiangfu Liu -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips") -+ -+OUTPUT_ARCH(mips) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x80000000; -+ . = ALIGN(4); -+ .text : -+ { -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .sdata : { *(.sdata) } -+ -+ _gp = ALIGN(16); -+ -+ __got_start = .; -+ .got : { *(.got) } -+ __got_end = .; -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ uboot_end_data = .; -+ num_got_entries = (__got_end - __got_start) >> 2; -+ -+ . = ALIGN(4); -+ .sbss : { *(.sbss) } -+ .bss : { *(.bss) } -+ uboot_end = .; -+} -+ASSERT(uboot_end <= 0x80002000, "NAND bootstrap too big"); -diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c -index 3ec34f3..24a4921 100644 ---- a/drivers/mtd/nand/jz4740_nand.c -+++ b/drivers/mtd/nand/jz4740_nand.c -@@ -15,6 +15,9 @@ - #include - #include - -+#ifdef CONFIG_SPL_BUILD -+#define printf(s) puts(s) -+#endif - #define JZ_NAND_DATA_ADDR ((void __iomem *)0xB8000000) - #define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000) - #define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000) -@@ -176,7 +179,7 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, - for (k = 0; k < 9; k++) - writeb(read_ecc[k], &emc->nfpar[k]); - } -- /* Set PRDY */ -+ - writel(readl(&emc->nfecr) | EMC_NFECR_PRDY, &emc->nfecr); - - /* Wait for completion */ -@@ -184,7 +187,7 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, - status = readl(&emc->nfints); - } while (!(status & EMC_NFINTS_DECF)); - -- /* disable ecc */ -+ /* Disable ECC */ - writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr); - - /* Check decoding */ -@@ -192,7 +195,7 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, - return 0; - - if (status & EMC_NFINTS_UNCOR) { -- printf("uncorrectable ecc\n"); -+ printf("JZ4740 uncorrectable ECC\n"); - return -1; - } - -@@ -230,6 +233,32 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, - return errcnt; - } - -+#ifdef CONFIG_SPL_BUILD -+static void jz_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -+{ -+ int i; -+ struct nand_chip *this = mtd->priv; -+ -+#if (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R3) || \ -+ (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R2) -+ for (i = 0; i < len; i += 2) -+ buf[i] = readw(this->IO_ADDR_R); -+#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R3) || \ -+ (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R2) -+ for (i = 0; i < len; i++) -+ buf[i] = readb(this->IO_ADDR_R); -+#else -+ #error JZ4740_NANDBOOT_CFG not defined or wrong -+#endif -+} -+ -+static uint8_t jz_nand_read_byte(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ return readb(this->IO_ADDR_R); -+} -+#endif -+ - /* - * Main initialization routine - */ -@@ -254,6 +283,10 @@ int board_nand_init(struct nand_chip *nand) - nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; - nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; - nand->ecc.layout = &qi_lb60_ecclayout_2gb; -+#ifdef CONFIG_SPL_BUILD -+ nand->read_byte = jz_nand_read_byte; -+ nand->read_buf = jz_nand_read_buf; -+#endif - nand->chip_delay = 50; - nand->options = NAND_USE_FLASH_BBT; - -diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h -index 4bb5bbc..7bff444 100644 ---- a/include/configs/qi_lb60.h -+++ b/include/configs/qi_lb60.h -@@ -1,5 +1,5 @@ - /* -- * Authors: Xiangfu Liu -+ * Authors: Xiangfu Liu - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License -@@ -14,7 +14,6 @@ - #define CONFIG_SYS_LITTLE_ENDIAN - #define CONFIG_JZSOC /* Jz SoC */ - #define CONFIG_JZ4740 /* Jz4740 SoC */ --#define CONFIG_NAND_JZ4740 - - #define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */ - #define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */ -@@ -24,24 +23,43 @@ - #define CONFIG_SYS_UART_BASE JZ4740_UART0_BASE /* Base of the UART channel */ - #define CONFIG_BAUDRATE 57600 - -+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL) -+#define CONFIG_BOOTDELAY 0 -+#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait" -+#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x280000;bootm" -+ -+/* -+ * Miscellaneous configurable options -+ */ -+#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ -+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 -+#define CONFIG_SYS_LOAD_ADDR 0x80600000 -+#define CONFIG_SYS_MEMTEST_START 0x80100000 -+#define CONFIG_SYS_MEMTEST_END 0x80A00000 -+#define CONFIG_SYS_TEXT_BASE 0x80100000 -+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -+ -+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -+#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) -+ -+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -+ -+#define CONFIG_SYS_LONGHELP -+#define CONFIG_SYS_MAXARGS 16 -+#define CONFIG_SYS_PROMPT "NanoNote# " -+ - #define CONFIG_SKIP_LOWLEVEL_INIT - #define CONFIG_BOARD_EARLY_INIT_F - #define CONFIG_SYS_NO_FLASH - #define CONFIG_SYS_FLASH_BASE 0 /* init flash_base as 0 */ --#define CONFIG_ENV_OVERWRITE -- --#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL) --#define CONFIG_BOOTDELAY 0 --#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait" --#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm" - - /* -- * Command line configuration. -+ * Command line configuration - */ - #define CONFIG_CMD_BOOTD /* bootd */ - #define CONFIG_CMD_CONSOLE /* coninfo */ - #define CONFIG_CMD_ECHO /* echo arguments */ -- - #define CONFIG_CMD_LOADB /* loadb */ - #define CONFIG_CMD_LOADS /* loads */ - #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ -@@ -58,45 +76,16 @@ - #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - - /* -- * Miscellaneous configurable options -- */ --#define CONFIG_SYS_MAXARGS 16 --#define CONFIG_SYS_LONGHELP --#define CONFIG_SYS_PROMPT "NanoNote# " --#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ --#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -- --#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) --#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) -- --#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ --#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 --#define CONFIG_SYS_LOAD_ADDR 0x80600000 --#define CONFIG_SYS_MEMTEST_START 0x80100000 --#define CONFIG_SYS_MEMTEST_END 0x80800000 -- --/* -- * Environment -+ * NAND driver configuration - */ --#define CONFIG_ENV_IS_IN_NAND /* use NAND for environment vars */ -- --#define CONFIG_SYS_NAND_5_ADDR_CYCLE --/* -- * if board nand flash is 1GB, set to 1 -- * if board nand flash is 2GB, set to 2 -- * for change the PAGE_SIZE and BLOCK_SIZE -- * will delete when there is no 1GB flash -- */ --#define NANONOTE_NAND_SIZE 2 -- --#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE) --#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10) --/* nand bad block was marked at this page in a block, start from 0 */ -+#define CONFIG_NAND_JZ4740 -+#define CONFIG_SYS_NAND_PAGE_SIZE 4096 -+#define CONFIG_SYS_NAND_BLOCK_SIZE (512 << 10) -+/* NAND bad block was marked at this page in a block, start from 0 */ - #define CONFIG_SYS_NAND_BADBLOCK_PAGE 127 - #define CONFIG_SYS_NAND_PAGE_COUNT 128 - #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 --/* ECC offset position in oob area, default value is 6 if it isn't defined */ --#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE) -+#define CONFIG_SYS_NAND_ECC_POS 12 - #define CONFIG_SYS_NAND_ECCSIZE 512 - #define CONFIG_SYS_NAND_ECCBYTES 9 - #define CONFIG_SYS_NAND_ECCPOS \ -@@ -115,10 +104,9 @@ - #define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE - #define CONFIG_SYS_MAX_NAND_DEVICE 1 - #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/ --#define CONFIG_NAND_SPL_TEXT_BASE 0x80000000 - - /* -- * IPL (Initial Program Loader, integrated inside CPU) -+ * IPL (Initial Program Loader, integrated inside Ingenic Xburst JZ4740 CPU) - * Will load first 8k from NAND (SPL) into cache and execute it from there. - * - * SPL (Secondary Program Loader) -@@ -130,77 +118,88 @@ - * NUB (NAND U-Boot) - * This NAND U-Boot (NUB) is a special U-Boot version which can be started - * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. -- * - */ -+ -+/* -+ * NAND SPL configuration -+ */ -+#define CONFIG_SPL -+#define CONFIG_SPL_LIBGENERIC_SUPPORT -+#define CONFIG_SPL_LIBCOMMON_SUPPORT -+#define CONFIG_SPL_NAND_LOAD -+#define CONFIG_SPL_NAND_SIMPLE -+#define CONFIG_SPL_NAND_SUPPORT -+#define CONFIG_SPL_TEXT_BASE 0x80000000 -+#define CONFIG_SPL_START_S_PATH "arch/mips/cpu/xburst/spl" -+ -+#define CONFIG_SYS_NAND_5_ADDR_CYCLE -+#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST -+#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3 -+ - #define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */ - #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST --/* Start NUB from this addr*/ -+ /* Start NUB from this addr */ -+#define CONFIG_SYS_NAND_U_BOOT_OFFS (32 << 10) /* Offset of NUB */ -+#define CONFIG_SYS_NAND_U_BOOT_SIZE (256 << 10) /* Size of NUB */ - - /* -- * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) -+ * Environment configuration - */ --#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */ --#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */ -- -+#define CONFIG_ENV_OVERWRITE -+#define CONFIG_ENV_IS_IN_NAND - #define CONFIG_ENV_SIZE (4 << 10) - #define CONFIG_ENV_OFFSET \ - (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE) - #define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_SYS_NAND_BLOCK_SIZE) - --#define CONFIG_SYS_TEXT_BASE 0x80100000 --#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -- - /* -- * SDRAM Info. -+ * CPU cache configuration - */ --#define CONFIG_NR_DRAM_BANKS 1 -+#define CONFIG_SYS_DCACHE_SIZE 16384 -+#define CONFIG_SYS_ICACHE_SIZE 16384 -+#define CONFIG_SYS_CACHELINE_SIZE 32 - - /* -- * Cache Configuration -+ * SDRAM configuration - */ --#define CONFIG_SYS_DCACHE_SIZE 16384 --#define CONFIG_SYS_ICACHE_SIZE 16384 --#define CONFIG_SYS_CACHELINE_SIZE 32 -+#define CONFIG_NR_DRAM_BANKS 1 -+ -+#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */ -+#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */ -+#define SDRAM_ROW 13 /* Row address: 11 to 13 */ -+#define SDRAM_COL 9 /* Column address: 8 to 12 */ -+#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */ -+#define SDRAM_TRAS 45 /* RAS# Active Time */ -+#define SDRAM_RCD 20 /* RAS# to CAS# Delay */ -+#define SDRAM_TPC 20 /* RAS# Precharge Time */ -+#define SDRAM_TRWL 7 /* Write Latency Time */ -+#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */ - - /* -- * GPIO definition -+ * GPIO configuration - */ --#define GPIO_LCD_CS (2 * 32 + 21) --#define GPIO_AMP_EN (3 * 32 + 4) -+#define GPIO_LCD_CS (2 * 32 + 21) -+#define GPIO_AMP_EN (3 * 32 + 4) - --#define GPIO_SDPW_EN (3 * 32 + 2) --#define GPIO_SD_DETECT (3 * 32 + 0) -+#define GPIO_SDPW_EN (3 * 32 + 2) -+#define GPIO_SD_DETECT (3 * 32 + 0) - --#define GPIO_BUZZ_PWM (3 * 32 + 27) --#define GPIO_USB_DETECT (3 * 32 + 28) -+#define GPIO_BUZZ_PWM (3 * 32 + 27) -+#define GPIO_USB_DETECT (3 * 32 + 28) - --#define GPIO_AUDIO_POP (1 * 32 + 29) --#define GPIO_COB_TEST (1 * 32 + 30) -+#define GPIO_AUDIO_POP (1 * 32 + 29) -+#define GPIO_COB_TEST (1 * 32 + 30) - - #define GPIO_KEYOUT_BASE (2 * 32 + 10) --#define GPIO_KEYIN_BASE (3 * 32 + 18) --#define GPIO_KEYIN_8 (3 * 32 + 26) -+#define GPIO_KEYIN_BASE (3 * 32 + 18) -+#define GPIO_KEYIN_8 (3 * 32 + 26) - --#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */ -+#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */ - #define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */ - - #define SPEN GPIO_LCD_CS /* LCDCS :Serial command enable */ - #define SPDA (2 * 32 + 22) /* LCDSCL:Serial command clock input */ - #define SPCK (2 * 32 + 23) /* LCDSDA:Serial command data input */ - --/* SDRAM paramters */ --#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */ --#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */ --#define SDRAM_ROW 13 /* Row address: 11 to 13 */ --#define SDRAM_COL 9 /* Column address: 8 to 12 */ --#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */ -- --/* SDRAM Timings, unit: ns */ --#define SDRAM_TRAS 45 /* RAS# Active Time */ --#define SDRAM_RCD 20 /* RAS# to CAS# Delay */ --#define SDRAM_TPC 20 /* RAS# Precharge Time */ --#define SDRAM_TRWL 7 /* Write Latency Time */ --#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */ -- - #endif --- -1.7.9.5 - diff --git a/package/boot/uboot-xburst/patches/0002-qi_lb60-add-software-usbboot-support.patch b/package/boot/uboot-xburst/patches/0002-qi_lb60-add-software-usbboot-support.patch deleted file mode 100644 index feaf297b7c..0000000000 --- a/package/boot/uboot-xburst/patches/0002-qi_lb60-add-software-usbboot-support.patch +++ /dev/null @@ -1,916 +0,0 @@ -From fa51192b912d296b8eec10f7d44c6c17eb1dd368 Mon Sep 17 00:00:00 2001 -From: Xiangfu -Date: Fri, 12 Oct 2012 09:47:39 +0800 -Subject: [PATCH 2/6] qi_lb60: add software usbboot support - - JZ4740 CPU have a internal ROM have such kind of code, that make - JZ4740 can boot from USB - - usbboot.S can downloads user program from the USB port to internal - SRAM and branches to the internal SRAM to execute the program - -Signed-off-by: Xiangfu ---- - board/qi/qi_lb60/Makefile | 1 + - board/qi/qi_lb60/qi_lb60-spl.c | 20 + - board/qi/qi_lb60/usbboot.S | 838 ++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 859 insertions(+) - create mode 100644 board/qi/qi_lb60/usbboot.S - -diff --git a/board/qi/qi_lb60/Makefile b/board/qi/qi_lb60/Makefile -index e399246..6dd8c6f 100644 ---- a/board/qi/qi_lb60/Makefile -+++ b/board/qi/qi_lb60/Makefile -@@ -23,6 +23,7 @@ include $(TOPDIR)/config.mk - LIB = $(obj)lib$(BOARD).o - - ifeq ($(CONFIG_SPL_BUILD),y) -+SOBJS := usbboot.o - COBJS := $(BOARD)-spl.o - else - COBJS := $(BOARD).o -diff --git a/board/qi/qi_lb60/qi_lb60-spl.c b/board/qi/qi_lb60/qi_lb60-spl.c -index 3fe3fa3..aea459c 100644 ---- a/board/qi/qi_lb60/qi_lb60-spl.c -+++ b/board/qi/qi_lb60/qi_lb60-spl.c -@@ -12,6 +12,24 @@ - #include - #include - -+#define KEY_U_OUT (32 * 2 + 16) -+#define KEY_U_IN (32 * 3 + 19) -+ -+extern void usb_boot(void); -+ -+static void check_usb_boot(void) -+{ -+ __gpio_as_input(KEY_U_IN); -+ __gpio_enable_pull(KEY_U_IN); -+ __gpio_as_output(KEY_U_OUT); -+ __gpio_clear_pin(KEY_U_OUT); -+ -+ if (!__gpio_get_pin(KEY_U_IN)) { -+ puts("[U] pressed, goto USBBOOT mode\n"); -+ usb_boot(); -+ } -+} -+ - void nand_spl_boot(void) - { - __gpio_as_sdram_16bit_4720(); -@@ -23,6 +41,8 @@ void nand_spl_boot(void) - pll_init(); - sdram_init(); - -+ check_usb_boot(); -+ - nand_init(); - - puts("\nQi LB60 SPL: Starting U-Boot ...\n"); -diff --git a/board/qi/qi_lb60/usbboot.S b/board/qi/qi_lb60/usbboot.S -new file mode 100644 -index 0000000..c872266 ---- /dev/null -+++ b/board/qi/qi_lb60/usbboot.S -@@ -0,0 +1,838 @@ -+/* -+ * for jz4740 usb boot -+ * -+ * Copyright (c) 2009 Author: -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ .set noreorder -+ .globl usb_boot -+ .text -+ -+/* -+ * Both NAND and USB boot load data to D-Cache first, then transfer -+ * data from D-Cache to I-Cache, and jump to execute the code in I-Cache. -+ * So init caches first and then dispatch to a proper boot routine. -+ */ -+ -+.macro load_addr reg addr -+ li \reg, 0x80000000 -+ addiu \reg, \reg, \addr -+ la $2, usbboot_begin -+ subu \reg, \reg, $2 -+.endm -+ -+usb_boot: -+ /* Initialize PLL: set ICLK to 84MHz and HCLK to 42MHz. */ -+ la $9, 0xB0000000 /* CPCCR: Clock Control Register */ -+ la $8, 0x42041110 /* I:S:M:P=1:2:2:2 */ -+ sw $8, 0($9) -+ -+ la $9, 0xB0000010 /* CPPCR: PLL Control Register */ -+ la $8, 0x06000120 /* M=12 N=0 D=0 CLK=12*(M+2)/(N+2) */ -+ sw $8, 0($9) -+ -+ mtc0 $0, $26 /* CP0_ERRCTL, restore WST reset state */ -+ nop -+ -+ mtc0 $0, $16 /* CP0_CONFIG */ -+ nop -+ -+ /* Relocate code to beginning of the ram */ -+ -+ la $2, usbboot_begin -+ la $3, usbboot_end -+ li $4, 0x80000000 -+ -+1: -+ lw $5, 0($2) -+ sw $5, 0($4) -+ addiu $2, $2, 4 -+ bne $2, $3, 1b -+ addiu $4, $4, 4 -+ -+ li $2, 0x80000000 -+ ori $3, $2, 0 -+ addiu $3, $3, usbboot_end -+ la $4, usbboot_begin -+ subu $3, $3, $4 -+ -+ -+2: -+ cache 0x0, 0($2) /* Index_Invalidate_I */ -+ cache 0x1, 0($2) /* Index_Writeback_Inv_D */ -+ addiu $2, $2, 32 -+ subu $4, $3, $2 -+ bgtz $4, 2b -+ nop -+ -+ load_addr $3, usb_boot_return -+ -+ jr $3 -+ -+usbboot_begin: -+ -+init_caches: -+ li $2, 3 /* cacheable for kseg0 access */ -+ mtc0 $2, $16 /* CP0_CONFIG */ -+ nop -+ -+ li $2, 0x20000000 /* enable idx-store-data cache insn */ -+ mtc0 $2, $26 /* CP0_ERRCTL */ -+ -+ ori $2, $28, 0 /* start address */ -+ ori $3, $2, 0x3fe0 /* end address, total 16KB */ -+ mtc0 $0, $28, 0 /* CP0_TAGLO */ -+ mtc0 $0, $28, 1 /* CP0_DATALO */ -+cache_clear_a_line: -+ cache 0x8, 0($2) /* Index_Store_Tag_I */ -+ cache 0x9, 0($2) /* Index_Store_Tag_D */ -+ bne $2, $3, cache_clear_a_line -+ addiu $2, $2, 32 /* increment CACHE_LINE_SIZE */ -+ -+ ori $2, $28, 0 /* start address */ -+ ori $3, $2, 0x3fe0 /* end address, total 16KB */ -+ la $4, 0x1ffff000 /* physical address and 4KB page mask */ -+cache_alloc_a_line: -+ and $5, $2, $4 -+ ori $5, $5, 1 /* V bit of the physical tag */ -+ mtc0 $5, $28, 0 /* CP0_TAGLO */ -+ cache 0x8, 0($2) /* Index_Store_Tag_I */ -+ cache 0x9, 0($2) /* Index_Store_Tag_D */ -+ bne $2, $3, cache_alloc_a_line -+ addiu $2, $2, 32 /* increment CACHE_LINE_SIZE */ -+ -+ nop -+ nop -+ nop -+ /* -+ * Transfer data from dcache to icache, then jump to icache. -+ * Input parameters: -+ * $19: data length in bytes -+ * $20: jump target address -+ */ -+xfer_d2i: -+ -+ ori $8, $20, 0 -+ addu $9, $8, $19 /* total 16KB */ -+ -+1: -+ cache 0x0, 0($8) /* Index_Invalidate_I */ -+ cache 0x1, 0($8) /* Index_Writeback_Inv_D */ -+ bne $8, $9, 1b -+ addiu $8, $8, 32 -+ -+ /* flush write-buffer */ -+ sync -+ -+ /* Invalidate BTB */ -+ mfc0 $8, $16, 7 /* CP0_CONFIG */ -+ nop -+ ori $8, 2 -+ mtc0 $8, $16, 7 -+ nop -+ -+ /* Overwrite config to disable ram initalisation */ -+ li $2, 0xff -+ sb $2, 20($20) -+ -+ jalr $20 -+ nop -+ -+icache_return: -+ /* User code can return to here after executing itself in -+ icache, by jumping to $31. */ -+ b usb_boot_return -+ nop -+ -+ -+usb_boot_return: -+ /* Enable the USB PHY */ -+ la $9, 0xB0000024 /* CPM_SCR */ -+ lw $8, 0($9) -+ ori $8, 0x40 /* USBPHY_ENABLE */ -+ sw $8, 0($9) -+ -+ /* Initialize USB registers */ -+ la $27, 0xb3040000 /* USB registers base address */ -+ -+ sb $0, 0x0b($27) /* INTRUSBE: disable common USB interrupts */ -+ sh $0, 0x06($27) /* INTRINE: disable EPIN interrutps */ -+ sh $0, 0x08($27) /* INTROUTE: disable EPOUT interrutps */ -+ -+ li $9, 0x61 -+ sb $9, 0x01($27) /* POWER: HSENAB | SUSPENDM | SOFTCONN */ -+ -+ /* Initialize USB states */ -+ li $22, 0 /* set EP0 to IDLE state */ -+ li $23, 1 /* no data stage */ -+ -+ /* Main loop of polling the usb commands */ -+usb_command_loop: -+ lbu $9, 0x0a($27) /* read INTRUSB */ -+ andi $9, 0x04 /* check USB_INTR_RESET */ -+ beqz $9, check_intr_ep0in -+ nop -+ -+ /* 1. Handle USB reset interrupt */ -+handle_reset_intr: -+ lbu $9, 0x01($27) /* read POWER */ -+ andi $9, 0x10 /* test HS_MODE */ -+ bnez $9, _usb_set_maxpktsize -+ li $9, 512 /* max packet size of HS mode */ -+ li $9, 64 /* max packet size of FS mode */ -+ -+_usb_set_maxpktsize: -+ li $8, 1 -+ sb $8, 0x0e($27) /* set INDEX 1 */ -+ -+ sh $9, 0x10($27) /* INMAXP */ -+ sb $0, 0x13($27) /* INCSRH */ -+ sh $9, 0x14($27) /* OUTMAXP */ -+ sb $0, 0x17($27) /* OUTCSRH */ -+ -+_usb_flush_fifo: -+ li $8, 0x48 /* INCSR_CDT && INCSR_FF */ -+ sb $8, 0x12($27) /* INCSR */ -+ li $8, 0x90 /* OUTCSR_CDT && OUTCSR_FF */ -+ sb $8, 0x16($27) /* OUTCSR */ -+ -+ li $22, 0 /* set EP0 to IDLE state */ -+ li $23, 1 /* no data stage */ -+ -+ /* 2. Check and handle EP0 interrupt */ -+check_intr_ep0in: -+ lhu $10, 0x02($27) /* read INTRIN */ -+ andi $9, $10, 0x1 /* check EP0 interrupt */ -+ beqz $9, check_intr_ep1in -+ nop -+ -+handle_ep0_intr: -+ sb $0, 0x0e($27) /* set INDEX 0 */ -+ lbu $11, 0x12($27) /* read CSR0 */ -+ -+ andi $9, $11, 0x04 /* check SENTSTALL */ -+ beqz $9, _ep0_setupend -+ nop -+ -+_ep0_sentstall: -+ andi $9, $11, 0xdb -+ sb $9, 0x12($27) /* clear SENDSTALL and SENTSTALL */ -+ li $22, 0 /* set EP0 to IDLE state */ -+ -+_ep0_setupend: -+ andi $9, $11, 0x10 /* check SETUPEND */ -+ beqz $9, ep0_idle_state -+ nop -+ -+ ori $9, $11, 0x80 -+ sb $9, 0x12($27) /* set SVDSETUPEND */ -+ li $22, 0 /* set EP0 to IDLE state */ -+ -+ep0_idle_state: -+ bnez $22, ep0_tx_state -+ nop -+ -+ /* 2.1 Handle EP0 IDLE state interrupt */ -+ andi $9, $11, 0x01 /* check OUTPKTRDY */ -+ beqz $9, check_intr_ep1in -+ nop -+ -+ /* Read 8-bytes setup packet from the FIFO */ -+ lw $25, 0x20($27) /* first word of setup packet */ -+ lw $26, 0x20($27) /* second word of setup packet */ -+ -+ andi $9, $25, 0x60 /* bRequestType & USB_TYPE_MASK */ -+ beqz $9, _ep0_std_req -+ nop -+ -+ /* 2.1.1 Vendor-specific setup request */ -+_ep0_vend_req: -+ li $22, 0 /* set EP0 to IDLE state */ -+ li $23, 1 /* NoData = 1 */ -+ -+ andi $9, $25, 0xff00 /* check bRequest */ -+ srl $9, $9, 8 -+ beqz $9, __ep0_get_cpu_info -+ sub $8, $9, 0x1 -+ beqz $8, __ep0_set_data_address -+ sub $8, $9, 0x2 -+ beqz $8, __ep0_set_data_length -+ sub $8, $9, 0x3 -+ beqz $8, __ep0_flush_caches -+ sub $8, $9, 0x4 -+ beqz $8, __ep0_prog_start1 -+ sub $8, $9, 0x5 -+ beqz $8, __ep0_prog_start2 -+ nop -+ b _ep0_idle_state_fini /* invalid request */ -+ nop -+ -+__ep0_get_cpu_info: -+ load_addr $20, cpu_info_data /* data pointer to transfer */ -+ li $21, 8 /* bytes left to transfer */ -+ li $22, 1 /* set EP0 to TX state */ -+ li $23, 0 /* NoData = 0 */ -+ -+ b _ep0_idle_state_fini -+ nop -+ -+__ep0_set_data_address: -+ li $9, 0xffff0000 -+ and $9, $25, $9 -+ andi $8, $26, 0xffff -+ or $20, $9, $8 /* data address of next transfer */ -+ -+ b _ep0_idle_state_fini -+ nop -+ -+__ep0_set_data_length: -+ li $9, 0xffff0000 -+ and $9, $25, $9 -+ andi $8, $26, 0xffff -+ or $21, $9, $8 /* data length of next transfer */ -+ -+ li $9, 0x48 /* SVDOUTPKTRDY and DATAEND */ -+ sb $9, 0x12($27) /* CSR0 */ -+ -+ /* We must write packet to FIFO before EP1-IN interrupt here. */ -+ b handle_epin1_intr -+ nop -+ -+__ep0_flush_caches: -+ /* Flush dcache and invalidate icache. */ -+ li $8, 0x80000000 -+ addi $9, $8, 0x3fe0 /* total 16KB */ -+ -+1: -+ cache 0x0, 0($8) /* Index_Invalidate_I */ -+ cache 0x1, 0($8) /* Index_Writeback_Inv_D */ -+ bne $8, $9, 1b -+ addiu $8, $8, 32 -+ -+ /* flush write-buffer */ -+ sync -+ -+ /* Invalidate BTB */ -+ mfc0 $8, $16, 7 /* CP0_CONFIG */ -+ nop -+ ori $8, 2 -+ mtc0 $8, $16, 7 -+ nop -+ -+ b _ep0_idle_state_fini -+ nop -+ -+__ep0_prog_start1: -+ li $9, 0x48 /* SVDOUTPKTRDY and DATAEND */ -+ sb $9, 0x12($27) /* CSR0 */ -+ -+ li $9, 0xffff0000 -+ and $9, $25, $9 -+ andi $8, $26, 0xffff -+ or $20, $9, $8 /* target address */ -+ -+ b xfer_d2i -+ li $19, 0x2000 /* 16KB data length */ -+ -+__ep0_prog_start2: -+ li $9, 0x48 /* SVDOUTPKTRDY and DATAEND */ -+ sb $9, 0x12($27) /* CSR0 */ -+ -+ li $9, 0xffff0000 -+ and $9, $25, $9 -+ andi $8, $26, 0xffff -+ or $20, $9, $8 /* target address */ -+ -+ jalr $20 /* jump, and place the return address in $31 */ -+ nop -+ -+__ep0_prog_start2_return: -+/* User code can return to here after executing itself, by jumping to $31 */ -+ b usb_boot_return -+ nop -+ -+ /* 2.1.2 Standard setup request */ -+_ep0_std_req: -+ andi $12, $25, 0xff00 /* check bRequest */ -+ srl $12, $12, 8 -+ sub $9, $12, 0x05 /* check USB_REQ_SET_ADDRESS */ -+ bnez $9, __ep0_req_set_config -+ nop -+ -+ /* Handle USB_REQ_SET_ADDRESS */ -+__ep0_req_set_addr: -+ srl $9, $25, 16 /* get wValue */ -+ sb $9, 0x0($27) /* set FADDR */ -+ li $23, 1 /* NoData = 1 */ -+ b _ep0_idle_state_fini -+ nop -+ -+__ep0_req_set_config: -+ sub $9, $12, 0x09 /* check USB_REQ_SET_CONFIGURATION */ -+ bnez $9, __ep0_req_get_desc -+ nop -+ -+ /* Handle USB_REQ_SET_CONFIGURATION */ -+ li $23, 1 /* NoData = 1 */ -+ b _ep0_idle_state_fini -+ nop -+ -+__ep0_req_get_desc: -+ sub $9, $12, 0x06 /* check USB_REQ_GET_DESCRIPTOR */ -+ bnez $9, _ep0_idle_state_fini -+ li $23, 1 /* NoData = 1 */ -+ -+ /* Handle USB_REQ_GET_DESCRIPTOR */ -+ li $23, 0 /* NoData = 0 */ -+ -+ srl $9, $25, 24 /* wValue >> 8 */ -+ sub $8, $9, 0x01 /* check USB_DT_DEVICE */ -+ beqz $8, ___ep0_get_dev_desc -+ srl $21, $26, 16 /* get wLength */ -+ sub $8, $9, 0x02 /* check USB_DT_CONFIG */ -+ beqz $8, ___ep0_get_conf_desc -+ sub $8, $9, 0x03 /* check USB_DT_STRING */ -+ beqz $8, ___ep0_get_string_desc -+ sub $8, $9, 0x06 /* check USB_DT_DEVICE_QUALIFIER */ -+ beqz $8, ___ep0_get_dev_qualifier -+ nop -+ b _ep0_idle_state_fini -+ nop -+ -+___ep0_get_dev_desc: -+ load_addr $20, device_desc /* data pointer */ -+ li $22, 1 /* set EP0 to TX state */ -+ sub $8, $21, 18 -+ blez $8, _ep0_idle_state_fini /* wLength <= 18 */ -+ nop -+ li $21, 18 /* max length of device_desc */ -+ b _ep0_idle_state_fini -+ nop -+ -+___ep0_get_dev_qualifier: -+ load_addr $20, dev_qualifier /* data pointer */ -+ li $22, 1 /* set EP0 to TX state */ -+ sub $8, $21, 10 -+ blez $8, _ep0_idle_state_fini /* wLength <= 10 */ -+ nop -+ li $21, 10 /* max length of dev_qualifier */ -+ b _ep0_idle_state_fini -+ nop -+ -+___ep0_get_conf_desc: -+ load_addr $20, config_desc_fs /* data pointer of FS mode */ -+ lbu $8, 0x01($27) /* read POWER */ -+ andi $8, 0x10 /* test HS_MODE */ -+ beqz $8, ___ep0_get_conf_desc2 -+ nop -+ load_addr $20, config_desc_hs /* data pointer of HS mode */ -+ -+___ep0_get_conf_desc2: -+ li $22, 1 /* set EP0 to TX state */ -+ sub $8, $21, 32 -+ blez $8, _ep0_idle_state_fini /* wLength <= 32 */ -+ nop -+ li $21, 32 /* max length of config_desc */ -+ b _ep0_idle_state_fini -+ nop -+ -+___ep0_get_string_desc: -+ li $22, 1 /* set EP0 to TX state */ -+ -+ srl $9, $25, 16 /* wValue & 0xff */ -+ andi $9, 0xff -+ -+ sub $8, $9, 1 -+ beqz $8, ___ep0_get_string_manufacture -+ sub $8, $9, 2 -+ beqz $8, ___ep0_get_string_product -+ nop -+ -+___ep0_get_string_lang_ids: -+ load_addr $20, string_lang_ids /* data pointer */ -+ b _ep0_idle_state_fini -+ li $21, 4 /* data length */ -+ -+___ep0_get_string_manufacture: -+ load_addr $20, string_manufacture /* data pointer */ -+ b _ep0_idle_state_fini -+ li $21, 16 /* data length */ -+ -+___ep0_get_string_product: -+ load_addr $20, string_product /* data pointer */ -+ b _ep0_idle_state_fini -+ li $21, 46 /* data length */ -+ -+_ep0_idle_state_fini: -+ li $9, 0x40 /* SVDOUTPKTRDY */ -+ beqz $23, _ep0_idle_state_fini2 -+ nop -+ ori $9, $9, 0x08 /* DATAEND */ -+_ep0_idle_state_fini2: -+ sb $9, 0x12($27) /* CSR0 */ -+ beqz $22, check_intr_ep1in -+ nop -+ -+ /* 2.2 Handle EP0 TX state interrupt */ -+ep0_tx_state: -+ sub $9, $22, 1 -+ bnez $9, check_intr_ep1in -+ nop -+ -+ sub $9, $21, 64 /* max packetsize */ -+ blez $9, _ep0_tx_state2 /* data count <= 64 */ -+ ori $19, $21, 0 -+ li $19, 64 -+ -+_ep0_tx_state2: -+ beqz $19, _ep0_tx_state3 /* send ZLP */ -+ ori $18, $19, 0 /* record bytes to be transferred */ -+ sub $21, $21, $19 /* decrement data count */ -+ -+_ep0_fifo_write_loop: -+ lbu $9, 0($20) /* read data */ -+ sb $9, 0x20($27) /* load FIFO */ -+ sub $19, $19, 1 /* decrement counter */ -+ bnez $19, _ep0_fifo_write_loop -+ addi $20, $20, 1 /* increment data pointer */ -+ -+ sub $9, $18, 64 /* max packetsize */ -+ beqz $9, _ep0_tx_state4 -+ nop -+ -+_ep0_tx_state3: -+ /* transferred bytes < max packetsize */ -+ li $9, 0x0a /* set INPKTRDY and DATAEND */ -+ sb $9, 0x12($27) /* CSR0 */ -+ li $22, 0 /* set EP0 to IDLE state */ -+ b check_intr_ep1in -+ nop -+ -+_ep0_tx_state4: -+ /* transferred bytes == max packetsize */ -+ li $9, 0x02 /* set INPKTRDY */ -+ sb $9, 0x12($27) /* CSR0 */ -+ b check_intr_ep1in -+ nop -+ -+ /* 3. Check and handle EP1 BULK-IN interrupt */ -+check_intr_ep1in: -+ andi $9, $10, 0x2 /* check EP1 IN interrupt */ -+ beqz $9, check_intr_ep1out -+ nop -+ -+handle_epin1_intr: -+ li $9, 1 -+ sb $9, 0x0e($27) /* set INDEX 1 */ -+ lbu $9, 0x12($27) /* read INCSR */ -+ -+ andi $8, $9, 0x2 /* check INCSR_FFNOTEMPT */ -+ bnez $8, _epin1_tx_state4 -+ nop -+ -+_epin1_write_fifo: -+ lhu $9, 0x10($27) /* get INMAXP */ -+ sub $8, $21, $9 -+ blez $8, _epin1_tx_state1 /* bytes left <= INMAXP */ -+ ori $19, $21, 0 -+ ori $19, $9, 0 -+ -+_epin1_tx_state1: -+ beqz $19, _epin1_tx_state4 /* No data */ -+ nop -+ -+ sub $21, $21, $19 /* decrement data count */ -+ -+ srl $5, $19, 2 /* # of word */ -+ andi $6, $19, 0x3 /* # of byte */ -+ beqz $5, _epin1_tx_state2 -+ nop -+ -+_epin1_fifo_write_word: -+ lw $9, 0($20) /* read data from source address */ -+ sw $9, 0x24($27) /* write FIFO */ -+ sub $5, $5, 1 /* decrement counter */ -+ bnez $5, _epin1_fifo_write_word -+ addiu $20, $20, 4 /* increment dest address */ -+ -+_epin1_tx_state2: -+ beqz $6, _epin1_tx_state3 -+ nop -+ -+_epin1_fifo_write_byte: -+ lbu $9, 0($20) /* read data from source address */ -+ sb $9, 0x24($27) /* write FIFO */ -+ sub $6, $6, 1 /* decrement counter */ -+ bnez $6, _epin1_fifo_write_byte -+ addiu $20, $20, 1 /* increment dest address */ -+ -+_epin1_tx_state3: -+ li $9, 0x1 -+ sb $9, 0x12($27) /* INCSR, set INPKTRDY */ -+ -+_epin1_tx_state4: -+ /* 4. Check and handle EP1 BULK-OUT interrupt */ -+check_intr_ep1out: -+ lhu $9, 0x04($27) /* read INTROUT */ -+ andi $9, 0x2 -+ beqz $9, check_status_next -+ nop -+ -+handle_epout1_intr: -+ li $9, 1 -+ sb $9, 0x0e($27) /* set INDEX 1 */ -+ -+ lbu $9, 0x16($27) /* read OUTCSR */ -+ andi $9, 0x1 /* check OUTPKTRDY */ -+ beqz $9, check_status_next -+ nop -+ -+_epout1_read_fifo: -+ lhu $19, 0x18($27) /* read OUTCOUNT */ -+ srl $5, $19, 2 /* # of word */ -+ andi $6, $19, 0x3 /* # of byte */ -+ beqz $5, _epout1_rx_state1 -+ nop -+ -+_epout1_fifo_read_word: -+ lw $9, 0x24($27) /* read FIFO */ -+ sw $9, 0($20) /* store to dest address */ -+ sub $5, $5, 1 /* decrement counter */ -+ bnez $5, _epout1_fifo_read_word -+ addiu $20, $20, 4 /* increment dest address */ -+ -+_epout1_rx_state1: -+ beqz $6, _epout1_rx_state2 -+ nop -+ -+_epout1_fifo_read_byte: -+ lbu $9, 0x24($27) /* read FIFO */ -+ sb $9, 0($20) /* store to dest address */ -+ sub $6, $6, 1 /* decrement counter */ -+ bnez $6, _epout1_fifo_read_byte -+ addiu $20, $20, 1 /* increment dest address */ -+ -+_epout1_rx_state2: -+ sb $0, 0x16($27) /* clear OUTPKTRDY */ -+ -+check_status_next: -+ b usb_command_loop -+ nop -+ -+/* Device/Configuration/Interface/Endpoint/String Descriptors */ -+ -+ .align 2 -+device_desc: -+ .byte 0x12 /* bLength */ -+ .byte 0x01 /* bDescriptorType */ -+ .byte 0x00 /* bcdUSB */ -+ .byte 0x02 /* bcdUSB */ -+ .byte 0x00 /* bDeviceClass */ -+ .byte 0x00 /* bDeviceSubClass */ -+ .byte 0x00 /* bDeviceProtocol */ -+ .byte 0x40 /* bMaxPacketSize0 */ -+ .byte 0x1a /* idVendor */ -+ .byte 0x60 /* idVendor */ -+ .byte 0x40 /* idProduct */ -+ .byte 0x47 /* idProduct */ -+ .byte 0x00 /* bcdDevice */ -+ .byte 0x01 /* bcdDevice */ -+ .byte 0x01 /* iManufacturer */ -+ .byte 0x02 /* iProduct */ -+ .byte 0x00 /* iSerialNumber */ -+ .byte 0x01 /* bNumConfigurations */ -+ -+ .align 2 -+dev_qualifier: -+ .byte 0x0a /* bLength */ -+ .byte 0x06 /* bDescriptorType */ -+ .byte 0x00 /* bcdUSB */ -+ .byte 0x02 /* bcdUSB */ -+ .byte 0x00 /* bDeviceClass */ -+ .byte 0x00 /* bDeviceSubClass */ -+ .byte 0x00 /* bDeviceProtocol */ -+ .byte 0x40 /* bMaxPacketSize0 */ -+ .byte 0x01 /* bNumConfigurations */ -+ .byte 0x00 /* bRESERVED */ -+ -+ .align 2 -+config_desc_hs: -+ .byte 0x09 /* bLength */ -+ .byte 0x02 /* bDescriptorType */ -+ .byte 0x20 /* wTotalLength */ -+ .byte 0x00 /* wTotalLength */ -+ .byte 0x01 /* bNumInterfaces */ -+ .byte 0x01 /* bConfigurationValue */ -+ .byte 0x00 /* iConfiguration */ -+ .byte 0xc0 /* bmAttributes */ -+ .byte 0x01 /* MaxPower */ -+intf_desc_hs: -+ .byte 0x09 /* bLength */ -+ .byte 0x04 /* bDescriptorType */ -+ .byte 0x00 /* bInterfaceNumber */ -+ .byte 0x00 /* bAlternateSetting */ -+ .byte 0x02 /* bNumEndpoints */ -+ .byte 0xff /* bInterfaceClass */ -+ .byte 0x00 /* bInterfaceSubClass */ -+ .byte 0x50 /* bInterfaceProtocol */ -+ .byte 0x00 /* iInterface */ -+ep1_desc_hs: -+ .byte 0x07 /* bLength */ -+ .byte 0x05 /* bDescriptorType */ -+ .byte 0x01 /* bEndpointAddress */ -+ .byte 0x02 /* bmAttributes */ -+ .byte 0x00 /* wMaxPacketSize */ -+ .byte 0x02 /* wMaxPacketSize */ -+ .byte 0x00 /* bInterval */ -+ep2_desc_hs: -+ .byte 0x07 /* bLength */ -+ .byte 0x05 /* bDescriptorType */ -+ .byte 0x81 /* bEndpointAddress */ -+ .byte 0x02 /* bmAttributes */ -+ .byte 0x00 /* wMaxPacketSize */ -+ .byte 0x02 /* wMaxPacketSize */ -+ .byte 0x00 /* bInterval */ -+ -+ .align 2 -+config_desc_fs: -+ .byte 0x09 /* bLength */ -+ .byte 0x02 /* bDescriptorType */ -+ .byte 0x20 /* wTotalLength */ -+ .byte 0x00 /* wTotalLength */ -+ .byte 0x01 /* bNumInterfaces */ -+ .byte 0x01 /* bConfigurationValue */ -+ .byte 0x00 /* iConfiguration */ -+ .byte 0xc0 /* bmAttributes */ -+ .byte 0x01 /* MaxPower */ -+intf_desc_fs: -+ .byte 0x09 /* bLength */ -+ .byte 0x04 /* bDescriptorType */ -+ .byte 0x00 /* bInterfaceNumber */ -+ .byte 0x00 /* bAlternateSetting */ -+ .byte 0x02 /* bNumEndpoints */ -+ .byte 0xff /* bInterfaceClass */ -+ .byte 0x00 /* bInterfaceSubClass */ -+ .byte 0x50 /* bInterfaceProtocol */ -+ .byte 0x00 /* iInterface */ -+ep1_desc_fs: -+ .byte 0x07 /* bLength */ -+ .byte 0x05 /* bDescriptorType */ -+ .byte 0x01 /* bEndpointAddress */ -+ .byte 0x02 /* bmAttributes */ -+ .byte 0x40 /* wMaxPacketSize */ -+ .byte 0x00 /* wMaxPacketSize */ -+ .byte 0x00 /* bInterval */ -+ep2_desc_fs: -+ .byte 0x07 /* bLength */ -+ .byte 0x05 /* bDescriptorType */ -+ .byte 0x81 /* bEndpointAddress */ -+ .byte 0x02 /* bmAttributes */ -+ .byte 0x40 /* wMaxPacketSize */ -+ .byte 0x00 /* wMaxPacketSize */ -+ .byte 0x00 /* bInterval */ -+ -+ .align 2 -+string_lang_ids: -+ .byte 0x04 -+ .byte 0x03 -+ .byte 0x09 -+ .byte 0x04 -+ -+ .align 2 -+string_manufacture: -+ .byte 0x10 -+ .byte 0x03 -+ .byte 0x49 -+ .byte 0x00 -+ .byte 0x6e -+ .byte 0x00 -+ .byte 0x67 -+ .byte 0x00 -+ .byte 0x65 -+ .byte 0x00 -+ .byte 0x6e -+ .byte 0x00 -+ .byte 0x69 -+ .byte 0x00 -+ .byte 0x63 -+ .byte 0x00 -+ -+ .align 2 -+string_product: -+ .byte 0x2e -+ .byte 0x03 -+ .byte 0x4a -+ .byte 0x00 -+ .byte 0x5a -+ .byte 0x00 -+ .byte 0x34 -+ .byte 0x00 -+ .byte 0x37 -+ .byte 0x00 -+ .byte 0x34 -+ .byte 0x00 -+ .byte 0x30 -+ .byte 0x00 -+ .byte 0x20 -+ .byte 0x00 -+ .byte 0x55 -+ .byte 0x00 -+ .byte 0x53 -+ .byte 0x00 -+ .byte 0x42 -+ .byte 0x00 -+ .byte 0x20 -+ .byte 0x00 -+ .byte 0x42 -+ .byte 0x00 -+ .byte 0x6f -+ .byte 0x00 -+ .byte 0x6f -+ .byte 0x00 -+ .byte 0x74 -+ .byte 0x00 -+ .byte 0x20 -+ .byte 0x00 -+ .byte 0x44 -+ .byte 0x00 -+ .byte 0x65 -+ .byte 0x00 -+ .byte 0x76 -+ .byte 0x00 -+ .byte 0x69 -+ .byte 0x00 -+ .byte 0x63 -+ .byte 0x00 -+ .byte 0x65 -+ .byte 0x00 -+ -+ .align 2 -+cpu_info_data: -+ .byte 0x4a -+ .byte 0x5a -+ .byte 0x34 -+ .byte 0x37 -+ .byte 0x34 -+ .byte 0x30 -+ .byte 0x56 -+ .byte 0x31 -+usbboot_end: -+ -+ .set reorder --- -1.7.9.5 - diff --git a/package/boot/uboot-xburst/patches/0003-add-mmc-support.patch b/package/boot/uboot-xburst/patches/0003-add-mmc-support.patch deleted file mode 100644 index e9baa7c373..0000000000 --- a/package/boot/uboot-xburst/patches/0003-add-mmc-support.patch +++ /dev/null @@ -1,1664 +0,0 @@ -From bd36739e77669e8df45c38f6acfe2cea511534d9 Mon Sep 17 00:00:00 2001 -From: Xiangfu -Date: Wed, 10 Oct 2012 18:19:41 +0800 -Subject: [PATCH 3/6] add mmc support - ---- - arch/mips/include/asm/jz4740.h | 166 ++++++ - board/qi/qi_lb60/qi_lb60.c | 9 +- - drivers/mmc/Makefile | 1 + - drivers/mmc/jz_mmc.c | 1179 ++++++++++++++++++++++++++++++++++++++++ - drivers/mmc/jz_mmc.h | 176 ++++++ - include/configs/qi_lb60.h | 9 + - include/mmc.h | 40 ++ - 7 files changed, 1578 insertions(+), 2 deletions(-) - create mode 100644 drivers/mmc/jz_mmc.c - create mode 100644 drivers/mmc/jz_mmc.h - -diff --git a/arch/mips/include/asm/jz4740.h b/arch/mips/include/asm/jz4740.h -index 7a7cfff..68287fb 100644 ---- a/arch/mips/include/asm/jz4740.h -+++ b/arch/mips/include/asm/jz4740.h -@@ -1146,5 +1146,171 @@ extern void sdram_init(void); - extern void calc_clocks(void); - extern void rtc_init(void); - -+/************************************************************************* -+ * MSC -+ *************************************************************************/ -+#define REG8(addr) *((volatile u8 *)(addr)) -+#define REG16(addr) *((volatile u16 *)(addr)) -+#define REG32(addr) *((volatile u32 *)(addr)) -+ -+#define CPM_BASE 0xB0000000 -+#define CPM_CPCCR (CPM_BASE+0x00) -+#define CPM_MSCCDR (CPM_BASE+0x68) -+#define REG_CPM_MSCCDR REG32(CPM_MSCCDR) -+#define REG_CPM_CPCCR REG32(CPM_CPCCR) -+ -+#define MSC_BASE 0xB0021000 -+ -+#define MSC_STRPCL (MSC_BASE + 0x000) -+#define MSC_STAT (MSC_BASE + 0x004) -+#define MSC_CLKRT (MSC_BASE + 0x008) -+#define MSC_CMDAT (MSC_BASE + 0x00C) -+#define MSC_RESTO (MSC_BASE + 0x010) -+#define MSC_RDTO (MSC_BASE + 0x014) -+#define MSC_BLKLEN (MSC_BASE + 0x018) -+#define MSC_NOB (MSC_BASE + 0x01C) -+#define MSC_SNOB (MSC_BASE + 0x020) -+#define MSC_IMASK (MSC_BASE + 0x024) -+#define MSC_IREG (MSC_BASE + 0x028) -+#define MSC_CMD (MSC_BASE + 0x02C) -+#define MSC_ARG (MSC_BASE + 0x030) -+#define MSC_RES (MSC_BASE + 0x034) -+#define MSC_RXFIFO (MSC_BASE + 0x038) -+#define MSC_TXFIFO (MSC_BASE + 0x03C) -+ -+#define REG_MSC_STRPCL REG16(MSC_STRPCL) -+#define REG_MSC_STAT REG32(MSC_STAT) -+#define REG_MSC_CLKRT REG16(MSC_CLKRT) -+#define REG_MSC_CMDAT REG32(MSC_CMDAT) -+#define REG_MSC_RESTO REG16(MSC_RESTO) -+#define REG_MSC_RDTO REG16(MSC_RDTO) -+#define REG_MSC_BLKLEN REG16(MSC_BLKLEN) -+#define REG_MSC_NOB REG16(MSC_NOB) -+#define REG_MSC_SNOB REG16(MSC_SNOB) -+#define REG_MSC_IMASK REG16(MSC_IMASK) -+#define REG_MSC_IREG REG16(MSC_IREG) -+#define REG_MSC_CMD REG8(MSC_CMD) -+#define REG_MSC_ARG REG32(MSC_ARG) -+#define REG_MSC_RES REG16(MSC_RES) -+#define REG_MSC_RXFIFO REG32(MSC_RXFIFO) -+#define REG_MSC_TXFIFO REG32(MSC_TXFIFO) -+ -+/* MSC Clock and Control Register (MSC_STRPCL) */ -+ -+#define MSC_STRPCL_EXIT_MULTIPLE (1 << 7) -+#define MSC_STRPCL_EXIT_TRANSFER (1 << 6) -+#define MSC_STRPCL_START_READWAIT (1 << 5) -+#define MSC_STRPCL_STOP_READWAIT (1 << 4) -+#define MSC_STRPCL_RESET (1 << 3) -+#define MSC_STRPCL_START_OP (1 << 2) -+#define MSC_STRPCL_CLOCK_CONTROL_BIT 0 -+#define MSC_STRPCL_CLOCK_CONTROL_MASK (0x3 << MSC_STRPCL_CLOCK_CONTROL_BIT) -+ #define MSC_STRPCL_CLOCK_CONTROL_STOP (0x1 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Stop MMC/SD clock */ -+ #define MSC_STRPCL_CLOCK_CONTROL_START (0x2 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Start MMC/SD clock */ -+ -+/* MSC Status Register (MSC_STAT) */ -+ -+#define MSC_STAT_IS_RESETTING (1 << 15) -+#define MSC_STAT_SDIO_INT_ACTIVE (1 << 14) -+#define MSC_STAT_PRG_DONE (1 << 13) -+#define MSC_STAT_DATA_TRAN_DONE (1 << 12) -+#define MSC_STAT_END_CMD_RES (1 << 11) -+#define MSC_STAT_DATA_FIFO_AFULL (1 << 10) -+#define MSC_STAT_IS_READWAIT (1 << 9) -+#define MSC_STAT_CLK_EN (1 << 8) -+#define MSC_STAT_DATA_FIFO_FULL (1 << 7) -+#define MSC_STAT_DATA_FIFO_EMPTY (1 << 6) -+#define MSC_STAT_CRC_RES_ERR (1 << 5) -+#define MSC_STAT_CRC_READ_ERROR (1 << 4) -+#define MSC_STAT_CRC_WRITE_ERROR_BIT 2 -+#define MSC_STAT_CRC_WRITE_ERROR_MASK (0x3 << MSC_STAT_CRC_WRITE_ERROR_BIT) -+ #define MSC_STAT_CRC_WRITE_ERROR_NO (0 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No error on transmission of data */ -+ #define MSC_STAT_CRC_WRITE_ERROR (1 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* Card observed erroneous transmission of data */ -+ #define MSC_STAT_CRC_WRITE_ERROR_NOSTS (2 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No CRC status is sent back */ -+#define MSC_STAT_TIME_OUT_RES (1 << 1) -+#define MSC_STAT_TIME_OUT_READ (1 << 0) -+ -+/* MSC Bus Clock Control Register (MSC_CLKRT) */ -+ -+#define MSC_CLKRT_CLK_RATE_BIT 0 -+#define MSC_CLKRT_CLK_RATE_MASK (0x7 << MSC_CLKRT_CLK_RATE_BIT) -+ #define MSC_CLKRT_CLK_RATE_DIV_1 (0x0 << MSC_CLKRT_CLK_RATE_BIT) /* CLK_SRC */ -+ #define MSC_CLKRT_CLK_RATE_DIV_2 (0x1 << MSC_CLKRT_CLK_RATE_BIT) /* 1/2 of CLK_SRC */ -+ #define MSC_CLKRT_CLK_RATE_DIV_4 (0x2 << MSC_CLKRT_CLK_RATE_BIT) /* 1/4 of CLK_SRC */ -+ #define MSC_CLKRT_CLK_RATE_DIV_8 (0x3 << MSC_CLKRT_CLK_RATE_BIT) /* 1/8 of CLK_SRC */ -+ #define MSC_CLKRT_CLK_RATE_DIV_16 (0x4 << MSC_CLKRT_CLK_RATE_BIT) /* 1/16 of CLK_SRC */ -+ #define MSC_CLKRT_CLK_RATE_DIV_32 (0x5 << MSC_CLKRT_CLK_RATE_BIT) /* 1/32 of CLK_SRC */ -+ #define MSC_CLKRT_CLK_RATE_DIV_64 (0x6 << MSC_CLKRT_CLK_RATE_BIT) /* 1/64 of CLK_SRC */ -+ #define MSC_CLKRT_CLK_RATE_DIV_128 (0x7 << MSC_CLKRT_CLK_RATE_BIT) /* 1/128 of CLK_SRC */ -+ -+/* MSC Command Sequence Control Register (MSC_CMDAT) */ -+ -+#define MSC_CMDAT_IO_ABORT (1 << 11) -+#define MSC_CMDAT_BUS_WIDTH_BIT 9 -+#define MSC_CMDAT_BUS_WIDTH_MASK (0x3 << MSC_CMDAT_BUS_WIDTH_BIT) -+#define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << MSC_CMDAT_BUS_WIDTH_BIT) -+#define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << MSC_CMDAT_BUS_WIDTH_BIT) -+#define MSC_CMDAT_DMA_EN (1 << 8) -+#define MSC_CMDAT_INIT (1 << 7) -+#define MSC_CMDAT_BUSY (1 << 6) -+#define MSC_CMDAT_STREAM_BLOCK (1 << 5) -+#define MSC_CMDAT_WRITE (1 << 4) -+#define MSC_CMDAT_READ (0 << 4) -+#define MSC_CMDAT_DATA_EN (1 << 3) -+#define MSC_CMDAT_RESPONSE_BIT 0 -+#define MSC_CMDAT_RESPONSE_MASK (0x7 << MSC_CMDAT_RESPONSE_BIT) -+#define MSC_CMDAT_RESPONSE_NONE (0x0 << MSC_CMDAT_RESPONSE_BIT) -+#define MSC_CMDAT_RESPONSE_R1 (0x1 << MSC_CMDAT_RESPONSE_BIT) -+#define MSC_CMDAT_RESPONSE_R2 (0x2 << MSC_CMDAT_RESPONSE_BIT) -+#define MSC_CMDAT_RESPONSE_R3 (0x3 << MSC_CMDAT_RESPONSE_BIT) -+#define MSC_CMDAT_RESPONSE_R4 (0x4 << MSC_CMDAT_RESPONSE_BIT) -+#define MSC_CMDAT_RESPONSE_R5 (0x5 << MSC_CMDAT_RESPONSE_BIT) -+#define MSC_CMDAT_RESPONSE_R6 (0x6 << MSC_CMDAT_RESPONSE_BIT) -+ -+/* MSC Interrupts Mask Register (MSC_IMASK) */ -+#define MSC_IMASK_SDIO (1 << 7) -+#define MSC_IMASK_TXFIFO_WR_REQ (1 << 6) -+#define MSC_IMASK_RXFIFO_RD_REQ (1 << 5) -+#define MSC_IMASK_END_CMD_RES (1 << 2) -+#define MSC_IMASK_PRG_DONE (1 << 1) -+#define MSC_IMASK_DATA_TRAN_DONE (1 << 0) -+ -+ -+/* MSC Interrupts Status Register (MSC_IREG) */ -+#define MSC_IREG_SDIO (1 << 7) -+#define MSC_IREG_TXFIFO_WR_REQ (1 << 6) -+#define MSC_IREG_RXFIFO_RD_REQ (1 << 5) -+#define MSC_IREG_END_CMD_RES (1 << 2) -+#define MSC_IREG_PRG_DONE (1 << 1) -+#define MSC_IREG_DATA_TRAN_DONE (1 << 0) -+ -+static __inline__ unsigned int __cpm_get_pllout2(void) -+{ -+ if (REG_CPM_CPCCR & CPM_CPCCR_PCS) -+ return __cpm_get_pllout(); -+ else -+ return __cpm_get_pllout()/2; -+} -+ -+static inline void __cpm_select_msc_clk(int sd) -+{ -+ unsigned int pllout2 = __cpm_get_pllout2(); -+ unsigned int div = 0; -+ -+ if (sd) { -+ div = pllout2 / 24000000; -+ } -+ else { -+ div = pllout2 / 16000000; -+ } -+ -+ REG_CPM_MSCCDR = div - 1; -+} -+#define __msc_reset() \ -+do { \ -+ REG_MSC_STRPCL = MSC_STRPCL_RESET; \ -+ while (REG_MSC_STAT & MSC_STAT_IS_RESETTING); \ -+} while (0) -+ - #endif /* !__ASSEMBLY__ */ - #endif /* __JZ4740_H__ */ -diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c -index 3bd4e2f..a2ba648 100644 ---- a/board/qi/qi_lb60/qi_lb60.c -+++ b/board/qi/qi_lb60/qi_lb60.c -@@ -40,8 +40,13 @@ static void gpio_init(void) - __gpio_clear_pin(GPIO_KEYOUT_BASE + i); - } - -- __gpio_as_input(GPIO_KEYIN_8); -- __gpio_enable_pull(GPIO_KEYIN_8); -+ if (__gpio_get_pin(GPIO_KEYIN_BASE + 2) == 0){ -+ printf("[S] pressed, enable UART0\n"); -+ __gpio_as_uart0(); -+ } else { -+ __gpio_as_input(GPIO_KEYIN_8); -+ __gpio_enable_pull(GPIO_KEYIN_8); -+ } - - /* enable the TP4, TP5 as UART0 */ - __gpio_jtag_to_uart0(); -diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile -index 565ba6a..3c717b1 100644 ---- a/drivers/mmc/Makefile -+++ b/drivers/mmc/Makefile -@@ -47,6 +47,7 @@ COBJS-$(CONFIG_SDHCI) += sdhci.o - COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o - COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o - COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o -+COBJS-$(CONFIG_JZ4740_MMC) += jz_mmc.o - - COBJS := $(COBJS-y) - SRCS := $(COBJS:.o=.c) -diff --git a/drivers/mmc/jz_mmc.c b/drivers/mmc/jz_mmc.c -new file mode 100644 -index 0000000..642cecc ---- /dev/null -+++ b/drivers/mmc/jz_mmc.c -@@ -0,0 +1,1179 @@ -+/* -+ * (C) Copyright 2003 -+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "jz_mmc.h" -+ -+static int sd2_0 = 0; -+static int mmc_ready = 0; -+static int use_4bit; /* Use 4-bit data bus */ -+/* -+ * MMC Events -+ */ -+#define MMC_EVENT_NONE 0x00 /* No events */ -+#define MMC_EVENT_RX_DATA_DONE 0x01 /* Rx data done */ -+#define MMC_EVENT_TX_DATA_DONE 0x02 /* Tx data done */ -+#define MMC_EVENT_PROG_DONE 0x04 /* Programming is done */ -+ -+ -+#define MMC_IRQ_MASK() \ -+do { \ -+ REG_MSC_IMASK = 0xffff; \ -+ REG_MSC_IREG = 0xffff; \ -+} while (0) -+ -+/* -+ * GPIO definition -+ */ -+#if defined(CONFIG_SAKC) -+ -+#define __msc_init_io() \ -+do { \ -+ __gpio_as_input(GPIO_SD_CD_N); \ -+} while (0) -+ -+#else -+#define __msc_init_io() \ -+do { \ -+ __gpio_as_output(GPIO_SD_VCC_EN_N); \ -+ __gpio_as_input(GPIO_SD_CD_N); \ -+} while (0) -+ -+#define __msc_enable_power() \ -+do { \ -+ __gpio_clear_pin(GPIO_SD_VCC_EN_N); \ -+} while (0) -+ -+#define __msc_disable_power() \ -+do { \ -+ __gpio_set_pin(GPIO_SD_VCC_EN_N); \ -+} while (0) -+ -+#endif /* CONFIG_SAKE */ -+ -+#define __msc_card_detected() \ -+({ \ -+ int detected = 1; \ -+ __gpio_as_input(GPIO_SD_CD_N); \ -+ __gpio_disable_pull(GPIO_SD_CD_N); \ -+ if (!__gpio_get_pin(GPIO_SD_CD_N)) \ -+ detected = 0; \ -+ detected; \ -+}) -+ -+/* -+ * Local functions -+ */ -+ -+extern int -+fat_register_device(block_dev_desc_t *dev_desc, int part_no); -+ -+static block_dev_desc_t mmc_dev; -+ -+block_dev_desc_t * mmc_get_dev(int dev) -+{ -+ return ((block_dev_desc_t *)&mmc_dev); -+} -+ -+/* Stop the MMC clock and wait while it happens */ -+static inline int jz_mmc_stop_clock(void) -+{ -+ int timeout = 1000; -+ -+ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_STOP; -+ -+ while (timeout && (REG_MSC_STAT & MSC_STAT_CLK_EN)) { -+ timeout--; -+ if (timeout == 0) -+ return MMC_ERROR_TIMEOUT; -+ udelay(1); -+ } -+ return MMC_NO_ERROR; -+} -+ -+/* Start the MMC clock and operation */ -+static inline int jz_mmc_start_clock(void) -+{ -+ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_START | MSC_STRPCL_START_OP; -+ return MMC_NO_ERROR; -+} -+ -+static inline u32 jz_mmc_calc_clkrt(int is_sd, u32 rate) -+{ -+ u32 clkrt = 0; -+ u32 clk_src = is_sd ? 24000000 : 16000000; -+ -+ while (rate < clk_src) { -+ clkrt ++; -+ clk_src >>= 1; -+ } -+ -+ return clkrt; -+} -+ -+/* Set the MMC clock frequency */ -+void jz_mmc_set_clock(int sd, u32 rate) -+{ -+ jz_mmc_stop_clock(); -+ -+ /* Select clock source of MSC */ -+ __cpm_select_msc_clk(sd); -+ -+ /* Set clock dividor of MSC */ -+ REG_MSC_CLKRT = jz_mmc_calc_clkrt(sd, rate); -+} -+ -+static int jz_mmc_check_status(struct mmc_request *request) -+{ -+ u32 status = REG_MSC_STAT; -+ -+ /* Checking for response or data timeout */ -+ if (status & (MSC_STAT_TIME_OUT_RES | MSC_STAT_TIME_OUT_READ)) { -+ printf("MMC/SD timeout, MMC_STAT 0x%x CMD %d\n", status, request->cmd); -+ return MMC_ERROR_TIMEOUT; -+ } -+ -+ /* Checking for CRC error */ -+ if (status & (MSC_STAT_CRC_READ_ERROR | MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_RES_ERR)) { -+ printf("MMC/CD CRC error, MMC_STAT 0x%x\n", status); -+ return MMC_ERROR_CRC; -+ } -+ -+ return MMC_NO_ERROR; -+} -+ -+/* Obtain response to the command and store it to response buffer */ -+static void jz_mmc_get_response(struct mmc_request *request) -+{ -+ int i; -+ u8 *buf; -+ u32 data; -+ -+ debug("fetch response for request %d, cmd %d\n", -+ request->rtype, request->cmd); -+ -+ buf = request->response; -+ request->result = MMC_NO_ERROR; -+ -+ switch (request->rtype) { -+ case RESPONSE_R1: case RESPONSE_R1B: case RESPONSE_R6: -+ case RESPONSE_R3: case RESPONSE_R4: case RESPONSE_R5: -+ { -+ data = REG_MSC_RES; -+ buf[0] = (data >> 8) & 0xff; -+ buf[1] = data & 0xff; -+ data = REG_MSC_RES; -+ buf[2] = (data >> 8) & 0xff; -+ buf[3] = data & 0xff; -+ data = REG_MSC_RES; -+ buf[4] = data & 0xff; -+ -+ debug("request %d, response [%02x %02x %02x %02x %02x]\n", -+ request->rtype, buf[0], buf[1], buf[2], buf[3], buf[4]); -+ break; -+ } -+ case RESPONSE_R2_CID: case RESPONSE_R2_CSD: -+ { -+ for (i = 0; i < 16; i += 2) { -+ data = REG_MSC_RES; -+ buf[i] = (data >> 8) & 0xff; -+ buf[i+1] = data & 0xff; -+ } -+ debug("request %d, response [", request->rtype); -+#if CONFIG_MMC_DEBUG_VERBOSE > 2 -+ if (g_mmc_debug >= 3) { -+ int n; -+ for (n = 0; n < 17; n++) -+ printk("%02x ", buf[n]); -+ printk("]\n"); -+ } -+#endif -+ break; -+ } -+ case RESPONSE_NONE: -+ debug("No response\n"); -+ break; -+ -+ default: -+ debug("unhandled response type for request %d\n", request->rtype); -+ break; -+ } -+} -+ -+static int jz_mmc_receive_data(struct mmc_request *req) -+{ -+ u32 stat, timeout, data, cnt; -+ u8 *buf = req->buffer; -+ u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */ -+ -+ timeout = 0x3ffffff; -+ -+ while (timeout) { -+ timeout--; -+ stat = REG_MSC_STAT; -+ -+ if (stat & MSC_STAT_TIME_OUT_READ) -+ return MMC_ERROR_TIMEOUT; -+ else if (stat & MSC_STAT_CRC_READ_ERROR) -+ return MMC_ERROR_CRC; -+ else if (!(stat & MSC_STAT_DATA_FIFO_EMPTY) -+ || (stat & MSC_STAT_DATA_FIFO_AFULL)) { -+ /* Ready to read data */ -+ break; -+ } -+ udelay(1); -+ } -+ if (!timeout) -+ return MMC_ERROR_TIMEOUT; -+ -+ /* Read data from RXFIFO. It could be FULL or PARTIAL FULL */ -+ cnt = wblocklen; -+ while (cnt) { -+ data = REG_MSC_RXFIFO; -+ { -+ *buf++ = (u8)(data >> 0); -+ *buf++ = (u8)(data >> 8); -+ *buf++ = (u8)(data >> 16); -+ *buf++ = (u8)(data >> 24); -+ } -+ cnt --; -+ while (cnt && (REG_MSC_STAT & MSC_STAT_DATA_FIFO_EMPTY)) -+ ; -+ } -+ return MMC_NO_ERROR; -+} -+ -+static int jz_mmc_transmit_data(struct mmc_request *req) -+{ -+#if 0 -+ u32 nob = req->nob; -+ u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */ -+ u8 *buf = req->buffer; -+ u32 *wbuf = (u32 *)buf; -+ u32 waligned = (((u32)buf & 0x3) == 0); /* word aligned ? */ -+ u32 stat, timeout, data, cnt; -+ -+ for (nob; nob >= 1; nob--) { -+ timeout = 0x3FFFFFF; -+ -+ while (timeout) { -+ timeout--; -+ stat = REG_MSC_STAT; -+ -+ if (stat & (MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_WRITE_ERROR_NOSTS)) -+ return MMC_ERROR_CRC; -+ else if (!(stat & MSC_STAT_DATA_FIFO_FULL)) { -+ /* Ready to write data */ -+ break; -+ } -+ -+ udelay(1); -+ } -+ -+ if (!timeout) -+ return MMC_ERROR_TIMEOUT; -+ -+ /* Write data to TXFIFO */ -+ cnt = wblocklen; -+ while (cnt) { -+ while (REG_MSC_STAT & MSC_STAT_DATA_FIFO_FULL) -+ ; -+ -+ if (waligned) { -+ REG_MSC_TXFIFO = *wbuf++; -+ } -+ else { -+ data = *buf++ | (*buf++ << 8) | (*buf++ << 16) | (*buf++ << 24); -+ REG_MSC_TXFIFO = data; -+ } -+ -+ cnt--; -+ } -+ } -+#endif -+ return MMC_NO_ERROR; -+} -+ -+ -+/* -+ * Name: int jz_mmc_exec_cmd() -+ * Function: send command to the card, and get a response -+ * Input: struct mmc_request *req : MMC/SD request -+ * Output: 0: right >0: error code -+ */ -+int jz_mmc_exec_cmd(struct mmc_request *request) -+{ -+ u32 cmdat = 0, events = 0; -+ int retval, timeout = 0x3fffff; -+ -+ /* Indicate we have no result yet */ -+ request->result = MMC_NO_RESPONSE; -+ if (request->cmd == MMC_CIM_RESET) { -+ /* On reset, 1-bit bus width */ -+ use_4bit = 0; -+ -+ /* Reset MMC/SD controller */ -+ __msc_reset(); -+ -+ /* On reset, drop MMC clock down */ -+ jz_mmc_set_clock(0, MMC_CLOCK_SLOW); -+ -+ /* On reset, stop MMC clock */ -+ jz_mmc_stop_clock(); -+ } -+ if (request->cmd == MMC_CMD_SEND_OP_COND) { -+ debug("Have an MMC card\n"); -+ /* always use 1bit for MMC */ -+ use_4bit = 0; -+ } -+ if (request->cmd == SET_BUS_WIDTH) { -+ if (request->arg == 0x2) { -+ printf("Use 4-bit bus width\n"); -+ use_4bit = 1; -+ } else { -+ printf("Use 1-bit bus width\n"); -+ use_4bit = 0; -+ } -+ } -+ -+ /* stop clock */ -+ jz_mmc_stop_clock(); -+ -+ /* mask all interrupts */ -+ REG_MSC_IMASK = 0xffff; -+ -+ /* clear status */ -+ REG_MSC_IREG = 0xffff; -+ -+ /* use 4-bit bus width when possible */ -+ if (use_4bit) -+ cmdat |= MSC_CMDAT_BUS_WIDTH_4BIT; -+ -+ /* Set command type and events */ -+ switch (request->cmd) { -+ /* MMC core extra command */ -+ case MMC_CIM_RESET: -+ cmdat |= MSC_CMDAT_INIT; /* Initialization sequence sent prior to command */ -+ break; -+ -+ /* bc - broadcast - no response */ -+ case MMC_CMD_GO_IDLE_STATE: -+ case MMC_CMD_SET_DSR: -+ break; -+ -+ /* bcr - broadcast with response */ -+ case MMC_CMD_SEND_OP_COND: -+ case MMC_CMD_ALL_SEND_CID: -+ case MMC_GO_IRQ_STATE: -+ break; -+ -+ /* adtc - addressed with data transfer */ -+ case MMC_READ_DAT_UNTIL_STOP: -+ case MMC_CMD_READ_SINGLE_BLOCK: -+ case MMC_CMD_READ_MULTIPLE_BLOCK: -+ case SD_CMD_APP_SEND_SCR: -+ cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_READ; -+ events = MMC_EVENT_RX_DATA_DONE; -+ break; -+ -+ case MMC_WRITE_DAT_UNTIL_STOP: -+ case MMC_CMD_WRITE_SINGLE_BLOCK: -+ case MMC_CMD_WRITE_MULTIPLE_BLOCK: -+ case MMC_PROGRAM_CID: -+ case MMC_PROGRAM_CSD: -+ case MMC_SEND_WRITE_PROT: -+ case MMC_GEN_CMD: -+ case MMC_LOCK_UNLOCK: -+ cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_WRITE; -+ events = MMC_EVENT_TX_DATA_DONE | MMC_EVENT_PROG_DONE; -+ -+ break; -+ -+ case MMC_CMD_STOP_TRANSMISSION: -+ events = MMC_EVENT_PROG_DONE; -+ break; -+ -+ /* ac - no data transfer */ -+ default: -+ break; -+ } -+ -+ /* Set response type */ -+ switch (request->rtype) { -+ case RESPONSE_NONE: -+ break; -+ -+ case RESPONSE_R1B: -+ cmdat |= MSC_CMDAT_BUSY; -+ /*FALLTHRU*/ -+ case RESPONSE_R1: -+ cmdat |= MSC_CMDAT_RESPONSE_R1; -+ break; -+ case RESPONSE_R2_CID: -+ case RESPONSE_R2_CSD: -+ cmdat |= MSC_CMDAT_RESPONSE_R2; -+ break; -+ case RESPONSE_R3: -+ cmdat |= MSC_CMDAT_RESPONSE_R3; -+ break; -+ case RESPONSE_R4: -+ cmdat |= MSC_CMDAT_RESPONSE_R4; -+ break; -+ case RESPONSE_R5: -+ cmdat |= MSC_CMDAT_RESPONSE_R5; -+ break; -+ case RESPONSE_R6: -+ cmdat |= MSC_CMDAT_RESPONSE_R6; -+ break; -+ default: -+ break; -+ } -+ -+ /* Set command index */ -+ if (request->cmd == MMC_CIM_RESET) { -+ REG_MSC_CMD = MMC_CMD_GO_IDLE_STATE; -+ } else { -+ REG_MSC_CMD = request->cmd; -+ } -+ -+ /* Set argument */ -+ REG_MSC_ARG = request->arg; -+ -+ /* Set block length and nob */ -+ if (request->cmd == SD_CMD_APP_SEND_SCR) { /* get SCR from DataFIFO */ -+ REG_MSC_BLKLEN = 8; -+ REG_MSC_NOB = 1; -+ } else { -+ REG_MSC_BLKLEN = request->block_len; -+ REG_MSC_NOB = request->nob; -+ } -+ -+ /* Set command */ -+ REG_MSC_CMDAT = cmdat; -+ -+ debug("Send cmd %d cmdat: %x arg: %x resp %d\n", request->cmd, -+ cmdat, request->arg, request->rtype); -+ -+ /* Start MMC/SD clock and send command to card */ -+ jz_mmc_start_clock(); -+ -+ /* Wait for command completion */ -+ while (timeout-- && !(REG_MSC_STAT & MSC_STAT_END_CMD_RES)) -+ ; -+ -+ if (timeout == 0) -+ return MMC_ERROR_TIMEOUT; -+ -+ REG_MSC_IREG = MSC_IREG_END_CMD_RES; /* clear flag */ -+ -+ /* Check for status */ -+ retval = jz_mmc_check_status(request); -+ if (retval) { -+ return retval; -+ } -+ -+ /* Complete command with no response */ -+ if (request->rtype == RESPONSE_NONE) { -+ return MMC_NO_ERROR; -+ } -+ -+ /* Get response */ -+ jz_mmc_get_response(request); -+ -+ /* Start data operation */ -+ if (events & (MMC_EVENT_RX_DATA_DONE | MMC_EVENT_TX_DATA_DONE)) { -+ if (events & MMC_EVENT_RX_DATA_DONE) { -+ if (request->cmd == SD_CMD_APP_SEND_SCR) { -+ /* SD card returns SCR register as data. -+ MMC core expect it in the response buffer, -+ after normal response. */ -+ request->buffer = (u8 *)((u32)request->response + 5); -+ } -+ jz_mmc_receive_data(request); -+ } -+ -+ if (events & MMC_EVENT_TX_DATA_DONE) { -+ jz_mmc_transmit_data(request); -+ } -+ -+ /* Wait for Data Done */ -+ while (!(REG_MSC_IREG & MSC_IREG_DATA_TRAN_DONE)) -+ ; -+ REG_MSC_IREG = MSC_IREG_DATA_TRAN_DONE; /* clear status */ -+ } -+ -+ /* Wait for Prog Done event */ -+ if (events & MMC_EVENT_PROG_DONE) { -+ while (!(REG_MSC_IREG & MSC_IREG_PRG_DONE)) -+ ; -+ REG_MSC_IREG = MSC_IREG_PRG_DONE; /* clear status */ -+ } -+ -+ /* Command completed */ -+ -+ return MMC_NO_ERROR; /* return successfully */ -+} -+ -+int mmc_block_read(u8 *dst, ulong src, ulong len) -+{ -+ -+ struct mmc_request request; -+ struct mmc_response_r1 r1; -+ int retval = 0; -+ -+ if (len == 0) -+ goto exit; -+ -+ mmc_simple_cmd(&request, MMC_CMD_SEND_STATUS, mmcinfo.rca, RESPONSE_R1); -+ retval = mmc_unpack_r1(&request, &r1, 0); -+ if (retval && (retval != MMC_ERROR_STATE_MISMATCH)) -+ goto exit; -+ -+ mmc_simple_cmd(&request, MMC_CMD_SET_BLOCKLEN, len, RESPONSE_R1); -+ if (retval = mmc_unpack_r1(&request, &r1, 0)) -+ goto exit; -+ -+ if (!sd2_0) -+ src *= mmcinfo.block_len; -+ -+ mmc_send_cmd(&request, MMC_CMD_READ_SINGLE_BLOCK, src, 1, len, RESPONSE_R1, dst); -+ if (retval = mmc_unpack_r1(&request, &r1, 0)) -+ goto exit; -+ -+exit: -+ return retval; -+} -+ -+ulong mmc_bread(int dev_num, ulong blkstart, ulong blkcnt, ulong *dst) -+{ -+ if (!mmc_ready) { -+ printf("Please initial the MMC first\n"); -+ return -1; -+ } -+ -+ int i = 0; -+ ulong dst_tmp = dst; -+ -+ for (i = 0; i < blkcnt; i++) { -+ if ((mmc_block_read((uchar *)(dst_tmp), blkstart, mmcinfo.block_len)) < 0) -+ return -1; -+ -+ dst_tmp += mmcinfo.block_len; -+ blkstart++; -+ } -+ -+ return i; -+} -+ -+int mmc_select_card(void) -+{ -+ struct mmc_request request; -+ struct mmc_response_r1 r1; -+ int retval; -+ -+ mmc_simple_cmd(&request, MMC_CMD_SELECT_CARD, mmcinfo.rca, RESPONSE_R1B); -+ retval = mmc_unpack_r1(&request, &r1, 0); -+ if (retval) { -+ return retval; -+ } -+ -+ if (mmcinfo.sd) { -+ mmc_simple_cmd(&request, MMC_CMD_APP_CMD, mmcinfo.rca, RESPONSE_R1); -+ retval = mmc_unpack_r1(&request,&r1,0); -+ if (retval) { -+ return retval; -+ } -+#if defined(MMC_BUS_WIDTH_1BIT) -+ mmc_simple_cmd(&request, SET_BUS_WIDTH, 1, RESPONSE_R1); -+#else -+ mmc_simple_cmd(&request, SET_BUS_WIDTH, 2, RESPONSE_R1); -+#endif -+ retval = mmc_unpack_r1(&request,&r1,0); -+ if (retval) { -+ return retval; -+ } -+ } -+ return 0; -+} -+ -+/* -+ * Configure card -+ */ -+static void mmc_configure_card(void) -+{ -+ u32 rate; -+ -+ /* Get card info */ -+ if (sd2_0) -+ mmcinfo.block_num = (mmcinfo.csd.c_size + 1) << 10; -+ else -+ mmcinfo.block_num = (mmcinfo.csd.c_size + 1) * (1 << (mmcinfo.csd.c_size_mult + 2)); -+ -+ mmcinfo.block_len = 1 << mmcinfo.csd.read_bl_len; -+ -+ mmc_dev.if_type = IF_TYPE_SD; -+ mmc_dev.part_type = PART_TYPE_DOS; -+ mmc_dev.dev = 0; -+ mmc_dev.lun = 0; -+ mmc_dev.type = 0; -+ mmc_dev.blksz = mmcinfo.block_len; -+ mmc_dev.lba = mmcinfo.block_num; -+ mmc_dev.removable = 0; -+ -+ printf("%s Detected: %lu blocks of %lu bytes\n", -+ sd2_0 == 1 ? "SDHC" : "SD", -+ mmc_dev.lba, -+ mmc_dev.blksz); -+ -+ /* Fix the clock rate */ -+ rate = mmc_tran_speed(mmcinfo.csd.tran_speed); -+ if (rate < MMC_CLOCK_SLOW) -+ rate = MMC_CLOCK_SLOW; -+ if ((mmcinfo.sd == 0) && (rate > MMC_CLOCK_FAST)) -+ rate = MMC_CLOCK_FAST; -+ if ((mmcinfo.sd) && (rate > SD_CLOCK_FAST)) -+ rate = SD_CLOCK_FAST; -+ -+ debug("%s: block_len=%d block_num=%d rate=%d\n", -+ __func__, mmcinfo.block_len, mmcinfo.block_num, rate); -+ -+ jz_mmc_set_clock(mmcinfo.sd, rate); -+} -+ -+/* -+ * State machine routines to initialize card(s) -+ */ -+ -+/* -+ CIM_SINGLE_CARD_ACQ (frequency at 400 kHz) -+ --- Must enter from GO_IDLE_STATE --- -+ 1. SD_SEND_OP_COND (SD Card) [CMD55] + [CMD41] -+ 2. SEND_OP_COND (Full Range) [CMD1] {optional} -+ 3. SEND_OP_COND (Set Range ) [CMD1] -+ If busy, delay and repeat step 2 -+ 4. ALL_SEND_CID [CMD2] -+ If timeout, set an error (no cards found) -+ 5. SET_RELATIVE_ADDR [CMD3] -+ 6. SEND_CSD [CMD9] -+ 7. SET_DSR [CMD4] Only call this if (csd.dsr_imp). -+ 8. Set clock frequency (check available in csd.tran_speed) -+ */ -+ -+#define MMC_INIT_DOING 0 -+#define MMC_INIT_PASSED 1 -+#define MMC_INIT_FAILED 2 -+ -+static int mmc_init_card_state(struct mmc_request *request) -+{ -+ struct mmc_response_r1 r1; -+ struct mmc_response_r3 r3; -+ int retval; -+ int ocr = 0x40300000; -+ int limit_41 = 0; -+ -+ switch (request->cmd) { -+ case MMC_CMD_GO_IDLE_STATE: /* No response to parse */ -+ if (mmcinfo.sd) -+ mmc_simple_cmd(request, 8, 0x1aa, RESPONSE_R1); -+ else -+ mmc_simple_cmd(request, MMC_CMD_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3); -+ break; -+ -+ case 8: -+ retval = mmc_unpack_r1(request,&r1,mmcinfo.state); -+ mmc_simple_cmd(request, MMC_CMD_APP_CMD, 0, RESPONSE_R1); -+ break; -+ -+ case MMC_CMD_APP_CMD: -+ retval = mmc_unpack_r1(request,&r1,mmcinfo.state); -+ if (retval & (limit_41 < 100)) { -+ debug("%s: unable to MMC_APP_CMD error=%d (%s)\n", -+ __func__, retval, mmc_result_to_string(retval)); -+ limit_41++; -+ mmc_simple_cmd(request, SD_CMD_APP_SEND_OP_COND, ocr, RESPONSE_R3); -+ } else if (limit_41 < 100) { -+ limit_41++; -+ mmc_simple_cmd(request, SD_CMD_APP_SEND_OP_COND, ocr, RESPONSE_R3); -+ } else{ -+ /* reset the card to idle*/ -+ mmc_simple_cmd(request, MMC_CMD_GO_IDLE_STATE, 0, RESPONSE_NONE); -+ mmcinfo.sd = 0; -+ } -+ break; -+ -+ case SD_CMD_APP_SEND_OP_COND: -+ retval = mmc_unpack_r3(request, &r3); -+ if (retval) { -+ debug("%s: try MMC card\n", __func__); -+ mmc_simple_cmd(request, SD_CMD_APP_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3); -+ break; -+ } -+ -+ debug("%s: read ocr value = 0x%08x\n", __func__, r3.ocr); -+ -+ if(!(r3.ocr & MMC_CARD_BUSY || ocr == 0)){ -+ udelay(50000); -+ mmc_simple_cmd(request, MMC_CMD_APP_CMD, 0, RESPONSE_R1); -+ } else { -+ mmcinfo.sd = 1; /* SD Card ready */ -+ mmcinfo.state = CARD_STATE_READY; -+ mmc_simple_cmd(request, MMC_CMD_ALL_SEND_CID, 0, RESPONSE_R2_CID); -+ } -+ break; -+ -+ case MMC_CMD_SEND_OP_COND: -+ retval = mmc_unpack_r3(request, &r3); -+ if (retval) { -+ debug("%s: failed SEND_OP_COND error=%d (%s)\n", -+ __func__, retval, mmc_result_to_string(retval)); -+ return MMC_INIT_FAILED; -+ } -+ -+ debug("%s: read ocr value = 0x%08x\n", __func__, r3.ocr); -+ if (!(r3.ocr & MMC_CARD_BUSY)) { -+ mmc_simple_cmd(request, MMC_CMD_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3); -+ } else { -+ mmcinfo.sd = 0; /* MMC Card ready */ -+ mmcinfo.state = CARD_STATE_READY; -+ mmc_simple_cmd(request, MMC_CMD_ALL_SEND_CID, 0, RESPONSE_R2_CID); -+ } -+ break; -+ -+ case MMC_CMD_ALL_SEND_CID: -+ retval = mmc_unpack_cid( request, &mmcinfo.cid ); -+ /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */ -+ if ( retval && (retval != MMC_ERROR_CRC)) { -+ debug("mmc_init_card_state: unable to ALL_SEND_CID error=%d (%s)\n", -+ retval, mmc_result_to_string(retval)); -+ return MMC_INIT_FAILED; -+ } -+ mmcinfo.state = CARD_STATE_IDENT; -+ if(mmcinfo.sd) -+ mmc_simple_cmd(request, MMC_CMD_SET_RELATIVE_ADDR, 0, RESPONSE_R6); -+ else -+ mmc_simple_cmd(request, MMC_CMD_SET_RELATIVE_ADDR, ID_TO_RCA(mmcinfo.id) << 16, RESPONSE_R1); -+ break; -+ -+ case MMC_CMD_SET_RELATIVE_ADDR: -+ if (mmcinfo.sd) { -+ retval = mmc_unpack_r6(request, &r1, mmcinfo.state, &mmcinfo.rca); -+ mmcinfo.rca = mmcinfo.rca << 16; -+ debug("%s: Get RCA from SD: 0x%04x Status: %x\n", -+ __func__, mmcinfo.rca, r1.status); -+ } else { -+ retval = mmc_unpack_r1(request,&r1,mmcinfo.state); -+ mmcinfo.rca = ID_TO_RCA(mmcinfo.id) << 16; -+ } -+ if (retval) { -+ debug("%s: unable to SET_RELATIVE_ADDR error=%d (%s)\n", -+ __func__, retval, mmc_result_to_string(retval)); -+ return MMC_INIT_FAILED; -+ } -+ -+ mmcinfo.state = CARD_STATE_STBY; -+ mmc_simple_cmd(request, MMC_CMD_SEND_CSD, mmcinfo.rca, RESPONSE_R2_CSD); -+ -+ break; -+ -+ case MMC_CMD_SEND_CSD: -+ retval = mmc_unpack_csd(request, &mmcinfo.csd); -+ mmc_ready = 1; -+ /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */ -+ if (retval && (retval != MMC_ERROR_CRC)) { -+ debug("%s: unable to SEND_CSD error=%d (%s)\n", -+ __func__, retval, mmc_result_to_string(retval)); -+ return MMC_INIT_FAILED; -+ } -+ if (mmcinfo.csd.dsr_imp) { -+ debug("%s: driver doesn't support setting DSR\n", __func__); -+ } -+ mmc_configure_card(); -+ return MMC_INIT_PASSED; -+ -+ default: -+ debug("%s: error! Illegal last cmd %d\n", __func__, request->cmd); -+ return MMC_INIT_FAILED; -+ } -+ -+ return MMC_INIT_DOING; -+} -+ -+int mmc_init_card(void) -+{ -+ struct mmc_request request; -+ int retval; -+ -+ mmc_simple_cmd(&request, MMC_CIM_RESET, 0, RESPONSE_NONE); /* reset card */ -+ mmc_simple_cmd(&request, MMC_CMD_GO_IDLE_STATE, 0, RESPONSE_NONE); -+ mmcinfo.sd = 1; /* assuming a SD card */ -+ -+ while ((retval = mmc_init_card_state(&request)) == MMC_INIT_DOING) -+ ; -+ -+ if (retval == MMC_INIT_PASSED) -+ return MMC_NO_ERROR; -+ else -+ return MMC_NO_RESPONSE; -+} -+ -+int mmc_legacy_init(int verbose) -+{ -+ if (!__msc_card_detected()) -+ return 1; -+ -+ /* Step-1: init GPIO */ -+ __gpio_as_msc(); -+ __msc_init_io(); -+ -+ /* Step-2: turn on power of card */ -+#if !defined(CONFIG_SAKC) -+ __msc_enable_power(); -+#endif -+ -+ /* Step-3: Reset MSC Controller. */ -+ __msc_reset(); -+ -+ /* Step-3: mask all IRQs. */ -+ MMC_IRQ_MASK(); -+ -+ /* Step-4: stop MMC/SD clock */ -+ jz_mmc_stop_clock(); -+ mmc_init_card(); -+ mmc_select_card(); -+ -+ mmc_dev.block_read = mmc_bread; -+ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */ -+ -+ return 0; -+} -+ -+/* -+ * Debugging functions -+ */ -+static char * mmc_result_strings[] = { -+ "NO_RESPONSE", -+ "NO_ERROR", -+ "ERROR_OUT_OF_RANGE", -+ "ERROR_ADDRESS", -+ "ERROR_BLOCK_LEN", -+ "ERROR_ERASE_SEQ", -+ "ERROR_ERASE_PARAM", -+ "ERROR_WP_VIOLATION", -+ "ERROR_CARD_IS_LOCKED", -+ "ERROR_LOCK_UNLOCK_FAILED", -+ "ERROR_COM_CRC", -+ "ERROR_ILLEGAL_COMMAND", -+ "ERROR_CARD_ECC_FAILED", -+ "ERROR_CC", -+ "ERROR_GENERAL", -+ "ERROR_UNDERRUN", -+ "ERROR_OVERRUN", -+ "ERROR_CID_CSD_OVERWRITE", -+ "ERROR_STATE_MISMATCH", -+ "ERROR_HEADER_MISMATCH", -+ "ERROR_TIMEOUT", -+ "ERROR_CRC", -+ "ERROR_DRIVER_FAILURE", -+}; -+ -+char * mmc_result_to_string(int i) -+{ -+ return mmc_result_strings[i+1]; -+} -+ -+static char * card_state_strings[] = { -+ "empty", -+ "idle", -+ "ready", -+ "ident", -+ "stby", -+ "tran", -+ "data", -+ "rcv", -+ "prg", -+ "dis", -+}; -+ -+static inline char * card_state_to_string(int i) -+{ -+ return card_state_strings[i+1]; -+} -+ -+/* -+ * Utility functions -+ */ -+ -+#define PARSE_U32(_buf,_index) \ -+ (((u32)_buf[_index]) << 24) | (((u32)_buf[_index+1]) << 16) | \ -+ (((u32)_buf[_index+2]) << 8) | ((u32)_buf[_index+3]); -+ -+#define PARSE_U16(_buf,_index) \ -+ (((u16)_buf[_index]) << 8) | ((u16)_buf[_index+1]); -+ -+int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd) -+{ -+ u8 *buf = request->response; -+ int num = 0; -+ -+ if (request->result) -+ return request->result; -+ -+ if (buf[0] != 0x3f) -+ return MMC_ERROR_HEADER_MISMATCH; -+ -+ csd->csd_structure = (buf[1] & 0xc0) >> 6; -+ if (csd->csd_structure) -+ sd2_0 = 1; -+ else -+ sd2_0 = 0; -+ -+ switch (csd->csd_structure) { -+ case 0 :/* Version 1.01-1.10 -+ * Version 2.00/Standard Capacity */ -+ csd->taac = buf[2]; -+ csd->nsac = buf[3]; -+ csd->tran_speed = buf[4]; -+ csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4); -+ csd->read_bl_len = buf[6] & 0x0f; -+ /* for support 2GB card*/ -+ if (csd->read_bl_len >= 10) -+ { -+ num = csd->read_bl_len - 9; -+ csd->read_bl_len = 9; -+ } -+ -+ csd->read_bl_partial = (buf[7] & 0x80) ? 1 : 0; -+ csd->write_blk_misalign = (buf[7] & 0x40) ? 1 : 0; -+ csd->read_blk_misalign = (buf[7] & 0x20) ? 1 : 0; -+ csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0; -+ csd->c_size = ((((u16)buf[7]) & 0x03) << 10) | (((u16)buf[8]) << 2) | (((u16)buf[9]) & 0xc0) >> 6; -+ -+ if (num) -+ csd->c_size = csd->c_size << num; -+ -+ -+ csd->vdd_r_curr_min = (buf[9] & 0x38) >> 3; -+ csd->vdd_r_curr_max = buf[9] & 0x07; -+ csd->vdd_w_curr_min = (buf[10] & 0xe0) >> 5; -+ csd->vdd_w_curr_max = (buf[10] & 0x1c) >> 2; -+ csd->c_size_mult = ((buf[10] & 0x03) << 1) | ((buf[11] & 0x80) >> 7); -+ csd->sector_size = (buf[11] & 0x7c) >> 2; -+ csd->erase_grp_size = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5); -+ csd->wp_grp_size = buf[12] & 0x1f; -+ csd->wp_grp_enable = (buf[13] & 0x80) ? 1 : 0; -+ csd->default_ecc = (buf[13] & 0x60) >> 5; -+ csd->r2w_factor = (buf[13] & 0x1c) >> 2; -+ csd->write_bl_len = ((buf[13] & 0x03) << 2) | ((buf[14] & 0xc0) >> 6); -+ if (csd->write_bl_len >= 10) -+ csd->write_bl_len = 9; -+ -+ csd->write_bl_partial = (buf[14] & 0x20) ? 1 : 0; -+ csd->file_format_grp = (buf[15] & 0x80) ? 1 : 0; -+ csd->copy = (buf[15] & 0x40) ? 1 : 0; -+ csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0; -+ csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0; -+ csd->file_format = (buf[15] & 0x0c) >> 2; -+ csd->ecc = buf[15] & 0x03; -+ break; -+ case 1 : /* Version 2.00/High Capacity */ -+ csd->taac = 0; -+ csd->nsac = 0; -+ csd->tran_speed = buf[4]; -+ csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4); -+ -+ csd->read_bl_len = 9; -+ csd->read_bl_partial = 0; -+ csd->write_blk_misalign = 0; -+ csd->read_blk_misalign = 0; -+ csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0; -+ csd->c_size = ((((u16)buf[8]) & 0x3f) << 16) | (((u16)buf[9]) << 8) | ((u16)buf[10]) ; -+ csd->sector_size = 0x7f; -+ csd->erase_grp_size = 0; -+ csd->wp_grp_size = 0; -+ csd->wp_grp_enable = 0; -+ csd->default_ecc = (buf[13] & 0x60) >> 5; -+ csd->r2w_factor = 4;/* Unused */ -+ csd->write_bl_len = 9; -+ -+ csd->write_bl_partial = 0; -+ csd->file_format_grp = 0; -+ csd->copy = (buf[15] & 0x40) ? 1 : 0; -+ csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0; -+ csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0; -+ csd->file_format = 0; -+ csd->ecc = buf[15] & 0x03; -+ } -+ -+ return 0; -+} -+ -+int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state) -+{ -+ u8 *buf = request->response; -+ -+ if (request->result) -+ return request->result; -+ -+ r1->cmd = buf[0]; -+ r1->status = PARSE_U32(buf,1); -+ -+ debug("mmc_unpack_r1: cmd=%d status=%08x\n", r1->cmd, r1->status); -+ -+ if (R1_STATUS(r1->status)) { -+ if (r1->status & R1_OUT_OF_RANGE) return MMC_ERROR_OUT_OF_RANGE; -+ if (r1->status & R1_ADDRESS_ERROR) return MMC_ERROR_ADDRESS; -+ if (r1->status & R1_BLOCK_LEN_ERROR) return MMC_ERROR_BLOCK_LEN; -+ if (r1->status & R1_ERASE_SEQ_ERROR) return MMC_ERROR_ERASE_SEQ; -+ if (r1->status & R1_ERASE_PARAM) return MMC_ERROR_ERASE_PARAM; -+ if (r1->status & R1_WP_VIOLATION) return MMC_ERROR_WP_VIOLATION; -+ /*if (r1->status & R1_CARD_IS_LOCKED) return MMC_ERROR_CARD_IS_LOCKED; */ -+ if (r1->status & R1_LOCK_UNLOCK_FAILED) return MMC_ERROR_LOCK_UNLOCK_FAILED; -+ if (r1->status & R1_COM_CRC_ERROR) return MMC_ERROR_COM_CRC; -+ if (r1->status & R1_ILLEGAL_COMMAND) return MMC_ERROR_ILLEGAL_COMMAND; -+ if (r1->status & R1_CARD_ECC_FAILED) return MMC_ERROR_CARD_ECC_FAILED; -+ if (r1->status & R1_CC_ERROR) return MMC_ERROR_CC; -+ if (r1->status & R1_ERROR) return MMC_ERROR_GENERAL; -+ if (r1->status & R1_UNDERRUN) return MMC_ERROR_UNDERRUN; -+ if (r1->status & R1_OVERRUN) return MMC_ERROR_OVERRUN; -+ if (r1->status & R1_CID_CSD_OVERWRITE) return MMC_ERROR_CID_CSD_OVERWRITE; -+ } -+ -+ if (buf[0] != request->cmd) -+ return MMC_ERROR_HEADER_MISMATCH; -+ -+ /* This should be last - it's the least dangerous error */ -+ -+ return 0; -+} -+ -+int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr) -+{ -+ u8 *buf = request->response; -+ if (request->result) -+ return request->result; -+ -+ *scr = PARSE_U32(buf, 5); /* Save SCR returned by the SD Card */ -+ return mmc_unpack_r1(request, r1, state); -+ -+} -+ -+int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca) -+{ -+ u8 *buf = request->response; -+ -+ if (request->result) -+ return request->result; -+ -+ *rca = PARSE_U16(buf,1); /* Save RCA returned by the SD Card */ -+ -+ *(buf+1) = 0; -+ *(buf+2) = 0; -+ -+ return mmc_unpack_r1(request, r1, state); -+} -+ -+int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid) -+{ -+ int i; -+ u8 *buf = request->response; -+ -+ if (request->result) -+ return request->result; -+ -+ cid->mid = buf[1]; -+ cid->oid = PARSE_U16(buf,2); -+ for (i = 0 ; i < 5 ; i++) -+ cid->pnm[i] = buf[4+i]; -+ cid->pnm[6] = 0; -+ cid->prv = buf[10]; -+ cid->psn = PARSE_U32(buf,10); -+ cid->mdt = buf[15]; -+ -+ printf("Man %02x OEM 0x%04x \"%s\" %d.%d 0x%08x " -+ "Date %02u/%04u\n", -+ cid->mid, -+ cid->oid, -+ cid->pnm, -+ cid->prv >> 4, -+ cid->prv & 0xf, -+ cid->psn, -+ cid->mdt & 0xf, -+ (cid->mdt >> 4) + 2000); -+ -+ if (buf[0] != 0x3f) -+ return MMC_ERROR_HEADER_MISMATCH; -+ return 0; -+} -+ -+int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3) -+{ -+ u8 *buf = request->response; -+ -+ if (request->result) -+ return request->result; -+ -+ r3->ocr = PARSE_U32(buf,1); -+ debug("mmc_unpack_r3: ocr=%08x\n", r3->ocr); -+ -+ if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH; -+ return 0; -+} -+ -+#define KBPS 1 -+#define MBPS 1000 -+ -+static u32 ts_exp[] = { 100*KBPS, 1*MBPS, 10*MBPS, 100*MBPS, 0, 0, 0, 0 }; -+static u32 ts_mul[] = { 0, 1000, 1200, 1300, 1500, 2000, 2500, 3000, -+ 3500, 4000, 4500, 5000, 5500, 6000, 7000, 8000 }; -+ -+u32 mmc_tran_speed(u8 ts) -+{ -+ u32 rate = ts_exp[(ts & 0x7)] * ts_mul[(ts & 0x78) >> 3]; -+ -+ if (rate <= 0) { -+ debug("%s: error - unrecognized speed 0x%02x\n", __func__, ts); -+ return 1; -+ } -+ -+ return rate; -+} -+ -+void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg, -+ u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer) -+{ -+ request->cmd = cmd; -+ request->arg = arg; -+ request->rtype = rtype; -+ request->nob = nob; -+ request->block_len = block_len; -+ request->buffer = buffer; -+ request->cnt = nob * block_len; -+ -+ jz_mmc_exec_cmd(request); -+} -diff --git a/drivers/mmc/jz_mmc.h b/drivers/mmc/jz_mmc.h -new file mode 100644 -index 0000000..936c514 ---- /dev/null -+++ b/drivers/mmc/jz_mmc.h -@@ -0,0 +1,176 @@ -+/* -+ * linux/drivers/mmc/jz_mmc.h -+ * -+ * Author: Vladimir Shebordaev, Igor Oblakov -+ * Copyright: MontaVista Software Inc. -+ * -+ * $Id: jz_mmc.h,v 1.3 2007-06-15 08:04:20 jlwei Exp $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __MMC_JZMMC_H__ -+#define __MMC_JZMMC_H__ -+ -+#define ID_TO_RCA(x) ((x)+1) -+#define MMC_OCR_ARG 0x00ff8000 /* Argument of OCR */ -+ -+/* Standard MMC/SD clock speeds */ -+#define MMC_CLOCK_SLOW 400000 /* 400 kHz for initial setup */ -+#define MMC_CLOCK_FAST 20000000 /* 20 MHz for maximum for normal operation */ -+#define SD_CLOCK_FAST 24000000 /* 24 MHz for SD Cards */ -+ -+/* Use negative numbers to disambiguate */ -+#define MMC_CIM_RESET -1 -+#define SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ -+ -+#define R1_OUT_OF_RANGE (1 << 31) /* er, c */ -+#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */ -+#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */ -+#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */ -+#define R1_ERASE_PARAM (1 << 27) /* ex, c */ -+#define R1_WP_VIOLATION (1 << 26) /* erx, c */ -+#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */ -+#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */ -+#define R1_COM_CRC_ERROR (1 << 23) /* er, b */ -+#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */ -+#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */ -+#define R1_CC_ERROR (1 << 20) /* erx, c */ -+#define R1_ERROR (1 << 19) /* erx, c */ -+#define R1_UNDERRUN (1 << 18) /* ex, c */ -+#define R1_OVERRUN (1 << 17) /* ex, c */ -+#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */ -+#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */ -+#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ -+#define R1_ERASE_RESET (1 << 13) /* sr, c */ -+#define R1_STATUS(x) (x & 0xFFFFE000) -+ -+#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */ -+ -+#define MMC_PROGRAM_CID 26 /* adtc R1 */ -+#define MMC_PROGRAM_CSD 27 /* adtc R1 */ -+ -+#define MMC_GO_IRQ_STATE 40 /* bcr R5 */ -+#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1b */ -+#define MMC_LOCK_UNLOCK 42 /* adtc R1b */ -+#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ -+#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ -+#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */ -+ -+ -+enum mmc_result_t { -+ MMC_NO_RESPONSE = -1, -+ MMC_NO_ERROR = 0, -+ MMC_ERROR_OUT_OF_RANGE, -+ MMC_ERROR_ADDRESS, -+ MMC_ERROR_BLOCK_LEN, -+ MMC_ERROR_ERASE_SEQ, -+ MMC_ERROR_ERASE_PARAM, -+ MMC_ERROR_WP_VIOLATION, -+ MMC_ERROR_CARD_IS_LOCKED, -+ MMC_ERROR_LOCK_UNLOCK_FAILED, -+ MMC_ERROR_COM_CRC, -+ MMC_ERROR_ILLEGAL_COMMAND, -+ MMC_ERROR_CARD_ECC_FAILED, -+ MMC_ERROR_CC, -+ MMC_ERROR_GENERAL, -+ MMC_ERROR_UNDERRUN, -+ MMC_ERROR_OVERRUN, -+ MMC_ERROR_CID_CSD_OVERWRITE, -+ MMC_ERROR_STATE_MISMATCH, -+ MMC_ERROR_HEADER_MISMATCH, -+ MMC_ERROR_TIMEOUT, -+ MMC_ERROR_CRC, -+ MMC_ERROR_DRIVER_FAILURE, -+}; -+ -+enum card_state { -+ CARD_STATE_EMPTY = -1, -+ CARD_STATE_IDLE = 0, -+ CARD_STATE_READY = 1, -+ CARD_STATE_IDENT = 2, -+ CARD_STATE_STBY = 3, -+ CARD_STATE_TRAN = 4, -+ CARD_STATE_DATA = 5, -+ CARD_STATE_RCV = 6, -+ CARD_STATE_PRG = 7, -+ CARD_STATE_DIS = 8, -+}; -+ -+enum mmc_rsp_t { -+ RESPONSE_NONE = 0, -+ RESPONSE_R1 = 1, -+ RESPONSE_R1B = 2, -+ RESPONSE_R2_CID = 3, -+ RESPONSE_R2_CSD = 4, -+ RESPONSE_R3 = 5, -+ RESPONSE_R4 = 6, -+ RESPONSE_R5 = 7, -+ RESPONSE_R6 = 8, -+}; -+ -+struct mmc_response_r1 { -+ u8 cmd; -+ u32 status; -+}; -+ -+struct mmc_response_r3 { -+ u32 ocr; -+}; -+ -+/* the information structure of MMC/SD Card */ -+struct mmc_info { -+ int id; /* Card index */ -+ int sd; /* MMC or SD card */ -+ int rca; /* RCA */ -+ u32 scr; /* SCR 63:32*/ -+ int flags; /* Ejected, inserted */ -+ enum card_state state; /* empty, ident, ready, whatever */ -+ -+ /* Card specific information */ -+ struct mmc_cid cid; -+ struct mmc_csd csd; -+ u32 block_num; -+ u32 block_len; -+ u32 erase_unit; -+}; -+ -+struct mmc_info mmcinfo; -+ -+struct mmc_request { -+ int index; /* Slot index - used for CS lines */ -+ int cmd; /* Command to send */ -+ u32 arg; /* Argument to send */ -+ enum mmc_rsp_t rtype; /* Response type expected */ -+ -+ /* Data transfer (these may be modified at the low level) */ -+ u16 nob; /* Number of blocks to transfer*/ -+ u16 block_len; /* Block length */ -+ u8 *buffer; /* Data buffer */ -+ u32 cnt; /* Data length, for PIO */ -+ -+ /* Results */ -+ u8 response[18]; /* Buffer to store response - CRC is optional */ -+ enum mmc_result_t result; -+}; -+ -+char * mmc_result_to_string(int); -+int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd); -+int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state); -+int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca); -+int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr); -+int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid); -+int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3); -+ -+void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg, -+ u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer); -+u32 mmc_tran_speed(u8 ts); -+void jz_mmc_set_clock(int sd, u32 rate); -+ -+static inline void mmc_simple_cmd(struct mmc_request *request, int cmd, u32 arg, enum mmc_rsp_t rtype) -+{ -+ mmc_send_cmd( request, cmd, arg, 0, 0, rtype, 0); -+} -+ -+#endif /* __MMC_JZMMC_H__ */ -diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h -index 7bff444..7b33be0 100644 ---- a/include/configs/qi_lb60.h -+++ b/include/configs/qi_lb60.h -@@ -31,6 +31,15 @@ - /* - * Miscellaneous configurable options - */ -+#define CONFIG_JZ4740_MMC -+#define CONFIG_MMC 1 -+#define CONFIG_FAT 1 -+#define CONFIG_DOS_PARTITION 1 -+#define CONFIG_CMD_MMC -+#define CONFIG_CMD_FAT -+#define CONFIG_CMD_EXT2 -+ -+ - #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ - #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - #define CONFIG_SYS_LOAD_ADDR 0x80600000 -diff --git a/include/mmc.h b/include/mmc.h -index a13e2bd..3c4761c 100644 ---- a/include/mmc.h -+++ b/include/mmc.h -@@ -283,4 +283,44 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); - int mmc_legacy_init(int verbose); - #endif - -+struct mmc_csd -+{ -+ u8 csd_structure:2, -+ spec_vers:4, -+ rsvd1:2; -+ u8 taac; -+ u8 nsac; -+ u8 tran_speed; -+ u16 ccc:12, -+ read_bl_len:4; -+ u32 c_size:22; -+ u64 read_bl_partial:1, -+ write_blk_misalign:1, -+ read_blk_misalign:1, -+ dsr_imp:1, -+ rsvd2:2, -+ vdd_r_curr_min:3, -+ vdd_r_curr_max:3, -+ vdd_w_curr_min:3, -+ vdd_w_curr_max:3, -+ c_size_mult:3, -+ sector_size:5, -+ erase_grp_size:5, -+ wp_grp_size:5, -+ wp_grp_enable:1, -+ default_ecc:2, -+ r2w_factor:3, -+ write_bl_len:4, -+ write_bl_partial:1, -+ rsvd3:5; -+ u8 file_format_grp:1, -+ copy:1, -+ perm_write_protect:1, -+ tmp_write_protect:1, -+ file_format:2, -+ ecc:2; -+ u8 crc:7; -+ u8 one:1; -+}; -+ - #endif /* _MMC_H_ */ --- -1.7.9.5 - diff --git a/package/boot/uboot-xburst/patches/0004-add-more-boot-options-F1-F2-F3-F4-M-S.patch b/package/boot/uboot-xburst/patches/0004-add-more-boot-options-F1-F2-F3-F4-M-S.patch deleted file mode 100644 index 73e03243c3..0000000000 --- a/package/boot/uboot-xburst/patches/0004-add-more-boot-options-F1-F2-F3-F4-M-S.patch +++ /dev/null @@ -1,200 +0,0 @@ -From c52b6168979d03fc31205444c3278c537787472a Mon Sep 17 00:00:00 2001 -From: Xiangfu -Date: Wed, 10 Oct 2012 18:39:55 +0800 -Subject: [PATCH 4/6] add more boot options(F1/F2/F3/F4/M/S) - ---- - arch/mips/include/asm/global_data.h | 3 +++ - arch/mips/lib/bootm.c | 17 ++++++++++++++++- - board/qi/qi_lb60/qi_lb60.c | 26 +++++++++++++++++++++++--- - common/main.c | 21 +++++++++++++++++++-- - include/configs/qi_lb60.h | 32 ++++++++++++++++++++++++++++++++ - 5 files changed, 93 insertions(+), 6 deletions(-) - -diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h -index 6e2cdc7..cd03d7e 100644 ---- a/arch/mips/include/asm/global_data.h -+++ b/arch/mips/include/asm/global_data.h -@@ -59,6 +59,9 @@ typedef struct global_data { - unsigned long env_valid; /* Checksum of Environment valid? */ - void **jt; /* jump table */ - char env_buf[32]; /* buffer for getenv() before reloc. */ -+#if defined(CONFIG_NANONOTE) -+ unsigned long boot_option; -+#endif - } gd_t; - - #include -diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c -index 608c1a7..e00416b 100644 ---- a/arch/mips/lib/bootm.c -+++ b/arch/mips/lib/bootm.c -@@ -47,10 +47,25 @@ int do_bootm_linux(int flag, int argc, char * const argv[], - bootm_headers_t *images) - { - void (*theKernel) (int, char **, char **, int *); -- char *commandline = getenv("bootargs"); -+ char *commandline; - char env_buf[12]; - char *cp; - -+#if defined(CONFIG_NANONOTE) -+ if (gd->boot_option & BOOT_FROM_MEMCARD) -+ commandline = getenv ("bootargsfromsd"); -+ else if (gd->boot_option & BOOT_WITH_F1) -+ commandline = getenv ("bootargsf1"); -+ else if (gd->boot_option & BOOT_WITH_F2) -+ commandline = getenv ("bootargsf2"); -+ else if (gd->boot_option & BOOT_WITH_F3) -+ commandline = getenv ("bootargsf3"); -+ else if (gd->boot_option & BOOT_WITH_F4) -+ commandline = getenv ("bootargsf4"); -+ else -+#endif -+ commandline = getenv ("bootargs"); -+ - if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) - return 1; - -diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c -index a2ba648..d622219 100644 ---- a/board/qi/qi_lb60/qi_lb60.c -+++ b/board/qi/qi_lb60/qi_lb60.c -@@ -15,7 +15,7 @@ DECLARE_GLOBAL_DATA_PTR; - - static void gpio_init(void) - { -- unsigned int i; -+ unsigned int i, j; - - /* Initialize NAND Flash Pins */ - __gpio_as_nand(); -@@ -42,14 +42,34 @@ static void gpio_init(void) - - if (__gpio_get_pin(GPIO_KEYIN_BASE + 2) == 0){ - printf("[S] pressed, enable UART0\n"); -+ gd->boot_option |= BOOT_WITH_ENABLE_UART; - __gpio_as_uart0(); - } else { - __gpio_as_input(GPIO_KEYIN_8); - __gpio_enable_pull(GPIO_KEYIN_8); - } - -- /* enable the TP4, TP5 as UART0 */ -- __gpio_jtag_to_uart0(); -+ if (__gpio_get_pin(GPIO_KEYIN_BASE + 3) == 0) { -+ printf("[M] pressed, boot from memory card\n"); -+ gd->boot_option |= BOOT_FROM_MEMCARD; -+ __gpio_jtag_to_uart0(); -+ } -+ -+ for (j = 0; j < 4; j++) { -+ for (i = 0; i < 4; i++) -+ __gpio_set_pin(GPIO_KEYOUT_BASE + i); -+ -+ __gpio_clear_pin(GPIO_KEYOUT_BASE + j); -+ -+ if (__gpio_get_pin(GPIO_KEYIN_BASE) == 0) { -+ printf("[F%d] pressed", (j + 1)); -+ gd->boot_option |= (1 << (j + 2)); -+ /* BOOT_WITH_F1 (1 << 2) */ -+ /* BOOT_WITH_F2 (1 << 3) */ -+ /* BOOT_WITH_F3 (1 << 4) */ -+ /* BOOT_WITH_F4 (1 << 5) */ -+ } -+ } - - __gpio_as_output(GPIO_AUDIO_POP); - __gpio_set_pin(GPIO_AUDIO_POP); -diff --git a/common/main.c b/common/main.c -index 9507cec..dbfb7ca 100644 ---- a/common/main.c -+++ b/common/main.c -@@ -355,7 +355,11 @@ void main_loop (void) - #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) - s = getenv ("bootdelay"); - bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY; -- -+#if defined(CONFIG_NANONOTE) -+ DECLARE_GLOBAL_DATA_PTR; -+ if (gd->boot_option & BOOT_WITH_ENABLE_UART) -+ bootdelay = 3; -+# endif - debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay); - - #if defined(CONFIG_MENU_SHOW) -@@ -379,7 +383,20 @@ void main_loop (void) - } - else - #endif /* CONFIG_BOOTCOUNT_LIMIT */ -- s = getenv ("bootcmd"); -+#if defined(CONFIG_NANONOTE) -+ if (gd->boot_option & BOOT_FROM_MEMCARD) -+ s = getenv ("bootcmdfromsd"); -+ else if (gd->boot_option & BOOT_WITH_F1) -+ s = getenv ("bootcmdf1"); -+ else if (gd->boot_option & BOOT_WITH_F2) -+ s = getenv ("bootcmdf2"); -+ else if (gd->boot_option & BOOT_WITH_F3) -+ s = getenv ("bootcmdf3"); -+ else if (gd->boot_option & BOOT_WITH_F4) -+ s = getenv ("bootcmdf4"); -+ else -+#endif -+ s = getenv ("bootcmd"); - - debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : ""); - -diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h -index 7b33be0..52b370c 100644 ---- a/include/configs/qi_lb60.h -+++ b/include/configs/qi_lb60.h -@@ -31,6 +31,7 @@ - /* - * Miscellaneous configurable options - */ -+#define CONFIG_NANONOTE - #define CONFIG_JZ4740_MMC - #define CONFIG_MMC 1 - #define CONFIG_FAT 1 -@@ -39,6 +40,37 @@ - #define CONFIG_CMD_FAT - #define CONFIG_CMD_EXT2 - -+#define CONFIG_CMD_UBIFS -+#define CONFIG_CMD_UBI -+#define CONFIG_MTD_PARTITIONS -+#define CONFIG_MTD_DEVICE -+#define CONFIG_CMD_MTDPARTS -+#define CONFIG_CMD_UBI -+#define CONFIG_CMD_UBIFS -+#define CONFIG_LZO -+#define CONFIG_RBTREE -+ -+#define MTDIDS_DEFAULT "nand0=jz4740-nand" -+#define MTDPARTS_DEFAULT "mtdparts=jz4740-nand:4M@0(uboot)ro,4M@4M(kernel)ro,512M@8M(rootfs)ro,-(data)ro" -+ -+#define BOOT_FROM_MEMCARD 1 -+#define BOOT_WITH_ENABLE_UART (1 << 1) /* Vaule for global_data.h gd->boot_option */ -+#define BOOT_WITH_F1 (1 << 2) -+#define BOOT_WITH_F2 (1 << 3) -+#define BOOT_WITH_F3 (1 << 4) -+#define BOOT_WITH_F4 (1 << 5) -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ "bootcmdfromsd=mmc init; ext2load mmc 0 0x80600000 /boot/uImage; bootm;\0" \ -+ "bootargsfromsd=mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait\0" \ -+ "bootcmdf1=mmc init; ext2load mmc 0:1 0x80600000 /boot/uImage; bootm;\0" \ -+ "bootargsf1=mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait\0" \ -+ "bootcmdf2=mmc init; ext2load mmc 0:2 0x80600000 /boot/uImage; bootm;\0" \ -+ "bootargsf2=mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p2 rw rootwait\0" \ -+ "bootcmdf3=mmc init; ext2load mmc 0:3 0x80600000 /boot/uImage; bootm;\0" \ -+ "bootargsf3=mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p3 rw rootwait\0" \ -+ "bootcmdf4=mtdparts default;ubi part rootfs;ubifsmount rootfs;ubifsload 0x80600000 /boot/uImage; bootm;\0" \ -+ "bootargsf4=mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait" - - #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ - #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 --- -1.7.9.5 - diff --git a/package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch b/package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch deleted file mode 100644 index 2c550f7205..0000000000 --- a/package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch +++ /dev/null @@ -1,847 +0,0 @@ -From ca8c5216cfd3ad3fda9867ed2d157ae5a209834b Mon Sep 17 00:00:00 2001 -From: Xiangfu -Date: Wed, 10 Oct 2012 22:05:27 +0800 -Subject: [PATCH 5/6] add nanonote lcd support - ---- - arch/mips/include/asm/global_data.h | 1 + - arch/mips/include/asm/jz4740.h | 90 ++++++++ - arch/mips/lib/board.c | 6 + - common/lcd.c | 9 +- - drivers/video/Makefile | 1 + - drivers/video/nanonote_gpm940b0.c | 400 +++++++++++++++++++++++++++++++++++ - drivers/video/nanonote_gpm940b0.h | 135 ++++++++++++ - include/configs/qi_lb60.h | 7 + - include/lcd.h | 52 ++++- - 9 files changed, 697 insertions(+), 4 deletions(-) - create mode 100644 drivers/video/nanonote_gpm940b0.c - create mode 100644 drivers/video/nanonote_gpm940b0.h - -diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h -index cd03d7e..7cec2de 100644 ---- a/arch/mips/include/asm/global_data.h -+++ b/arch/mips/include/asm/global_data.h -@@ -44,6 +44,7 @@ typedef struct global_data { - unsigned long per_clk; /* Peripheral bus clock */ - unsigned long mem_clk; /* Memory bus clock */ - unsigned long dev_clk; /* Device clock */ -+ unsigned long fb_base; /* base address of framebuffer */ - /* "static data" needed by most of timer.c */ - unsigned long tbl; - unsigned long lastinc; -diff --git a/arch/mips/include/asm/jz4740.h b/arch/mips/include/asm/jz4740.h -index 68287fb..13724a2 100644 ---- a/arch/mips/include/asm/jz4740.h -+++ b/arch/mips/include/asm/jz4740.h -@@ -1312,5 +1312,95 @@ do { \ - while (REG_MSC_STAT & MSC_STAT_IS_RESETTING); \ - } while (0) - -+/************************************************************************* -+ * LCD (LCD Controller) -+ *************************************************************************/ -+#define REG32(addr) *((volatile u32 *)(addr)) -+ -+#define CPM_BASE 0xB0000000 -+#define CPM_CPCCR (CPM_BASE+0x00) -+#define REG_CPM_CPCCR REG32(CPM_CPCCR) -+ -+#define LCD_BASE 0xB3050000 -+#define LCD_CFG (LCD_BASE + 0x00) /* LCD Configure Register */ -+#define LCD_VSYNC (LCD_BASE + 0x04) /* Vertical Synchronize Register */ -+#define LCD_HSYNC (LCD_BASE + 0x08) /* Horizontal Synchronize Register */ -+#define LCD_VAT (LCD_BASE + 0x0c) /* Virtual Area Setting Register */ -+#define LCD_DAH (LCD_BASE + 0x10) /* Display Area Horizontal Start/End Point */ -+#define LCD_DAV (LCD_BASE + 0x14) /* Display Area Vertical Start/End Point */ -+#define LCD_PS (LCD_BASE + 0x18) /* PS Signal Setting */ -+#define LCD_CLS (LCD_BASE + 0x1c) /* CLS Signal Setting */ -+#define LCD_SPL (LCD_BASE + 0x20) /* SPL Signal Setting */ -+#define LCD_REV (LCD_BASE + 0x24) /* REV Signal Setting */ -+#define LCD_CTRL (LCD_BASE + 0x30) /* LCD Control Register */ -+#define LCD_STATE (LCD_BASE + 0x34) /* LCD Status Register */ -+#define LCD_IID (LCD_BASE + 0x38) /* Interrupt ID Register */ -+#define LCD_DA0 (LCD_BASE + 0x40) /* Descriptor Address Register 0 */ -+#define LCD_SA0 (LCD_BASE + 0x44) /* Source Address Register 0 */ -+#define LCD_FID0 (LCD_BASE + 0x48) /* Frame ID Register 0 */ -+#define LCD_CMD0 (LCD_BASE + 0x4c) /* DMA Command Register 0 */ -+#define LCD_DA1 (LCD_BASE + 0x50) /* Descriptor Address Register 1 */ -+#define LCD_SA1 (LCD_BASE + 0x54) /* Source Address Register 1 */ -+#define LCD_FID1 (LCD_BASE + 0x58) /* Frame ID Register 1 */ -+#define LCD_CMD1 (LCD_BASE + 0x5c) /* DMA Command Register 1 */ -+ -+#define REG_LCD_CFG REG32(LCD_CFG) -+#define REG_LCD_VSYNC REG32(LCD_VSYNC) -+#define REG_LCD_HSYNC REG32(LCD_HSYNC) -+#define REG_LCD_VAT REG32(LCD_VAT) -+#define REG_LCD_DAH REG32(LCD_DAH) -+#define REG_LCD_DAV REG32(LCD_DAV) -+#define REG_LCD_PS REG32(LCD_PS) -+#define REG_LCD_CLS REG32(LCD_CLS) -+#define REG_LCD_SPL REG32(LCD_SPL) -+#define REG_LCD_REV REG32(LCD_REV) -+#define REG_LCD_CTRL REG32(LCD_CTRL) -+#define REG_LCD_STATE REG32(LCD_STATE) -+#define REG_LCD_IID REG32(LCD_IID) -+#define REG_LCD_DA0 REG32(LCD_DA0) -+#define REG_LCD_SA0 REG32(LCD_SA0) -+#define REG_LCD_FID0 REG32(LCD_FID0) -+#define REG_LCD_CMD0 REG32(LCD_CMD0) -+#define REG_LCD_DA1 REG32(LCD_DA1) -+#define REG_LCD_SA1 REG32(LCD_SA1) -+#define REG_LCD_FID1 REG32(LCD_FID1) -+#define REG_LCD_CMD1 REG32(LCD_CMD1) -+ -+#define LCD_CTRL_BPP_BIT 0 /* Bits Per Pixel */ -+#define LCD_CTRL_BPP_MASK (0x07 << LCD_CTRL_BPP_BIT) -+ #define LCD_CTRL_BPP_1 (0 << LCD_CTRL_BPP_BIT) /* 1 bpp */ -+ #define LCD_CTRL_BPP_2 (1 << LCD_CTRL_BPP_BIT) /* 2 bpp */ -+ #define LCD_CTRL_BPP_4 (2 << LCD_CTRL_BPP_BIT) /* 4 bpp */ -+ #define LCD_CTRL_BPP_8 (3 << LCD_CTRL_BPP_BIT) /* 8 bpp */ -+ #define LCD_CTRL_BPP_16 (4 << LCD_CTRL_BPP_BIT) /* 15/16 bpp */ -+ #define LCD_CTRL_BPP_18_24 (5 << LCD_CTRL_BPP_BIT) /* 18/24/32 bpp */ -+ -+#define LCD_CTRL_BST_BIT 28 /* Burst Length Selection */ -+#define LCD_CTRL_BST_MASK (0x03 << LCD_CTRL_BST_BIT) -+ #define LCD_CTRL_BST_4 (0 << LCD_CTRL_BST_BIT) /* 4-word */ -+ #define LCD_CTRL_BST_8 (1 << LCD_CTRL_BST_BIT) /* 8-word */ -+ #define LCD_CTRL_BST_16 (2 << LCD_CTRL_BST_BIT) /* 16-word */ -+#define LCD_CTRL_RGB565 (0 << 27) /* RGB565 mode */ -+#define LCD_CTRL_RGB555 (1 << 27) /* RGB555 mode */ -+#define LCD_CTRL_OFUP (1 << 26) /* Output FIFO underrun protection enable */ -+#define LCD_CTRL_FRC_BIT 24 /* STN FRC Algorithm Selection */ -+#define LCD_CTRL_FRC_MASK (0x03 << LCD_CTRL_FRC_BIT) -+ #define LCD_CTRL_FRC_16 (0 << LCD_CTRL_FRC_BIT) /* 16 grayscale */ -+ #define LCD_CTRL_FRC_4 (1 << LCD_CTRL_FRC_BIT) /* 4 grayscale */ -+ #define LCD_CTRL_FRC_2 (2 << LCD_CTRL_FRC_BIT) /* 2 grayscale */ -+ -+#define CPM_LPCDR (CPM_BASE+0x64) -+#define CPM_CLKGR (CPM_BASE+0x20) -+#define REG_CPM_LPCDR REG32(CPM_LPCDR) -+#define REG_CPM_CLKGR REG32(CPM_CLKGR) -+ -+#define __cpm_start_tcu() (REG_CPM_CLKGR &= ~CPM_CLKGR_TCU) -+#define __cpm_stop_lcd() (REG_CPM_CLKGR |= CPM_CLKGR_LCD) -+#define __cpm_set_pixdiv(v) \ -+ (REG_CPM_LPCDR = (REG_CPM_LPCDR & ~CPM_LPCDR_PIXDIV_MASK) | ((v) << (CPM_LPCDR_PIXDIV_BIT))) -+#define __cpm_set_ldiv(v) \ -+ (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_LDIV_MASK) | ((v) << (CPM_CPCCR_LDIV_BIT))) -+#define __cpm_start_lcd() (REG_CPM_CLKGR &= ~CPM_CLKGR_LCD) -+ - #endif /* !__ASSEMBLY__ */ - #endif /* __JZ4740_H__ */ -diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c -index b14b33e..c2e64d9 100644 ---- a/arch/mips/lib/board.c -+++ b/arch/mips/lib/board.c -@@ -172,6 +172,12 @@ void board_init_f(ulong bootflag) - addr &= ~(4096 - 1); - debug("Top of RAM usable for U-Boot at: %08lx\n", addr); - -+#ifdef CONFIG_LCD -+ /* reserve memory for LCD display (always full pages) */ -+ addr = lcd_setmem (addr); -+ gd->fb_base = addr; -+#endif /* CONFIG_LCD */ -+ - /* Reserve memory for U-Boot code, data & bss - * round down to next 16 kB limit - */ -diff --git a/common/lcd.c b/common/lcd.c -index b6be800..af1281a 100644 ---- a/common/lcd.c -+++ b/common/lcd.c -@@ -263,6 +263,13 @@ static void lcd_drawchars(ushort x, ushort y, uchar *str, int count) - lcd_color_fg : lcd_color_bg; - bits <<= 1; - } -+#elif LCD_BPP == LCD_COLOR32 -+ uint *m = (uint *)d; -+ for (c=0; c<32; ++c) { -+ *m++ = (bits & 0x80) ? -+ lcd_color_fg : lcd_color_bg; -+ bits <<= 1; -+ } - #endif - } - #if LCD_BPP == LCD_MONOCHROME -@@ -509,7 +516,7 @@ static inline ushort *configuration_get_cmap(void) - return (ushort *)&(cp->lcd_cmap[255 * sizeof(ushort)]); - #elif defined(CONFIG_ATMEL_LCD) - return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0)); --#elif !defined(CONFIG_ATMEL_HLCD) && !defined(CONFIG_EXYNOS_FB) -+#elif !defined(CONFIG_ATMEL_HLCD) && !defined(CONFIG_EXYNOS_FB) && !defined(CONFIG_VIDEO_GPM940B0) - return panel_info.cmap; - #else - #if defined(CONFIG_LCD_LOGO) -diff --git a/drivers/video/Makefile b/drivers/video/Makefile -index ebb6da8..03625bc 100644 ---- a/drivers/video/Makefile -+++ b/drivers/video/Makefile -@@ -50,6 +50,7 @@ COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o - COBJS-$(CONFIG_VIDEO_SM501) += sm501.o - COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o - COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o -+COBJS-$(CONFIG_VIDEO_GPM940B0) += nanonote_gpm940b0.o - - COBJS := $(sort $(COBJS-y)) - SRCS := $(COBJS:.o=.c) -diff --git a/drivers/video/nanonote_gpm940b0.c b/drivers/video/nanonote_gpm940b0.c -new file mode 100644 -index 0000000..11efb72 ---- /dev/null -+++ b/drivers/video/nanonote_gpm940b0.c -@@ -0,0 +1,400 @@ -+/* -+ * JzRISC lcd controller -+ * -+ * Xiangfu Liu -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+ -+#include /* virt_to_phys() */ -+#include -+ -+#include "nanonote_gpm940b0.h" -+ -+#define align2(n) (n)=((((n)+1)>>1)<<1) -+#define align4(n) (n)=((((n)+3)>>2)<<2) -+#define align8(n) (n)=((((n)+7)>>3)<<3) -+ -+struct jzfb_info { -+ unsigned int cfg; /* panel mode and pin usage etc. */ -+ unsigned int w; -+ unsigned int h; -+ unsigned int bpp; /* bit per pixel */ -+ unsigned int fclk; /* frame clk */ -+ unsigned int hsw; /* hsync width, in pclk */ -+ unsigned int vsw; /* vsync width, in line count */ -+ unsigned int elw; /* end of line, in pclk */ -+ unsigned int blw; /* begin of line, in pclk */ -+ unsigned int efw; /* end of frame, in line count */ -+ unsigned int bfw; /* begin of frame, in line count */ -+}; -+ -+static struct jzfb_info jzfb = { -+ MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N, -+ 320, 240, 32, 70, 1, 1, 273, 140, 1, 20 -+}; -+ -+vidinfo_t panel_info = { -+ 320, 240, LCD_BPP, -+}; -+ -+void *lcd_base; -+void *lcd_console_address; -+int lcd_line_length; -+int lcd_color_fg; -+int lcd_color_bg; -+short console_col; -+short console_row; -+ -+static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid) -+{ -+ u_long palette_mem_size; -+ struct jz_fb_info *fbi = &vid->jz_fb; -+ int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8; -+ -+ fbi->screen = (u_long)lcdbase; -+ fbi->palette_size = 256; -+ palette_mem_size = fbi->palette_size * sizeof(u16); -+ -+ debug("jz_lcd.c palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); -+ /* locate palette and descs at end of page following fb */ -+ fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size; -+ -+ return 0; -+} -+ -+static void jz_lcd_desc_init(vidinfo_t *vid) -+{ -+ struct jz_fb_info * fbi; -+ fbi = &vid->jz_fb; -+ fbi->dmadesc_fblow = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 3*16); -+ fbi->dmadesc_fbhigh = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 2*16); -+ fbi->dmadesc_palette = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 1*16); -+ -+ #define BYTES_PER_PANEL (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8) -+ -+ /* populate descriptors */ -+ fbi->dmadesc_fblow->fdadr = virt_to_phys(fbi->dmadesc_fblow); -+ fbi->dmadesc_fblow->fsadr = virt_to_phys((void *)(fbi->screen + BYTES_PER_PANEL)); -+ fbi->dmadesc_fblow->fidr = 0; -+ fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL / 4 ; -+ -+ fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* only used in dual-panel mode */ -+ -+ fbi->dmadesc_fbhigh->fsadr = virt_to_phys((void *)fbi->screen); -+ fbi->dmadesc_fbhigh->fidr = 0; -+ fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL / 4; /* length in word */ -+ -+ fbi->dmadesc_palette->fsadr = virt_to_phys((void *)fbi->palette); -+ fbi->dmadesc_palette->fidr = 0; -+ fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2)/4 | (1<<28); -+ -+ if(NBITS(vid->vl_bpix) < 12) { -+ /* assume any mode with <12 bpp is palette driven */ -+ fbi->dmadesc_palette->fdadr = virt_to_phys(fbi->dmadesc_fbhigh); -+ fbi->dmadesc_fbhigh->fdadr = virt_to_phys(fbi->dmadesc_palette); -+ /* flips back and forth between pal and fbhigh */ -+ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_palette); -+ } else { -+ /* palette shouldn't be loaded in true-color mode */ -+ fbi->dmadesc_fbhigh->fdadr = virt_to_phys((void *)fbi->dmadesc_fbhigh); -+ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_fbhigh); /* no pal just fbhigh */ -+ } -+} -+ -+static int jz_lcd_hw_init(vidinfo_t *vid) -+{ -+ struct jz_fb_info *fbi = &vid->jz_fb; -+ unsigned int val = 0; -+ unsigned int pclk; -+ unsigned int stnH; -+ int pll_div; -+ -+ /* Setting Control register */ -+ switch (jzfb.bpp) { -+ case 1: -+ val |= LCD_CTRL_BPP_1; -+ break; -+ case 2: -+ val |= LCD_CTRL_BPP_2; -+ break; -+ case 4: -+ val |= LCD_CTRL_BPP_4; -+ break; -+ case 8: -+ val |= LCD_CTRL_BPP_8; -+ break; -+ case 15: -+ val |= LCD_CTRL_RGB555; -+ case 16: -+ val |= LCD_CTRL_BPP_16; -+ break; -+ case 17 ... 32: -+ val |= LCD_CTRL_BPP_18_24; /* target is 4bytes/pixel */ -+ break; -+ -+ default: -+ printf("jz_lcd.c The BPP %d is not supported\n", jzfb.bpp); -+ val |= LCD_CTRL_BPP_16; -+ break; -+ } -+ -+ switch (jzfb.cfg & MODE_MASK) { -+ case MODE_STN_MONO_DUAL: -+ case MODE_STN_COLOR_DUAL: -+ case MODE_STN_MONO_SINGLE: -+ case MODE_STN_COLOR_SINGLE: -+ switch (jzfb.bpp) { -+ case 1: -+ /* val |= LCD_CTRL_PEDN; */ -+ case 2: -+ val |= LCD_CTRL_FRC_2; -+ break; -+ case 4: -+ val |= LCD_CTRL_FRC_4; -+ break; -+ case 8: -+ default: -+ val |= LCD_CTRL_FRC_16; -+ break; -+ } -+ break; -+ } -+ -+ val |= LCD_CTRL_BST_16; /* Burst Length is 16WORD=64Byte */ -+ val |= LCD_CTRL_OFUP; /* OutFIFO underrun protect */ -+ -+ switch (jzfb.cfg & MODE_MASK) { -+ case MODE_STN_MONO_DUAL: -+ case MODE_STN_COLOR_DUAL: -+ case MODE_STN_MONO_SINGLE: -+ case MODE_STN_COLOR_SINGLE: -+ switch (jzfb.cfg & STN_DAT_PINMASK) { -+ case STN_DAT_PIN1: -+ /* Do not adjust the hori-param value. */ -+ break; -+ case STN_DAT_PIN2: -+ align2(jzfb.hsw); -+ align2(jzfb.elw); -+ align2(jzfb.blw); -+ break; -+ case STN_DAT_PIN4: -+ align4(jzfb.hsw); -+ align4(jzfb.elw); -+ align4(jzfb.blw); -+ break; -+ case STN_DAT_PIN8: -+ align8(jzfb.hsw); -+ align8(jzfb.elw); -+ align8(jzfb.blw); -+ break; -+ } -+ break; -+ } -+ -+ REG_LCD_CTRL = val; -+ -+ switch (jzfb.cfg & MODE_MASK) { -+ case MODE_STN_MONO_DUAL: -+ case MODE_STN_COLOR_DUAL: -+ case MODE_STN_MONO_SINGLE: -+ case MODE_STN_COLOR_SINGLE: -+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL) || -+ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL)) -+ stnH = jzfb.h >> 1; -+ else -+ stnH = jzfb.h; -+ -+ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw; -+ REG_LCD_HSYNC = ((jzfb.blw+jzfb.w) << 16) | (jzfb.blw+jzfb.w+jzfb.hsw); -+ -+ /* Screen setting */ -+ REG_LCD_VAT = ((jzfb.blw + jzfb.w + jzfb.hsw + jzfb.elw) << 16) | (stnH + jzfb.vsw + jzfb.bfw + jzfb.efw); -+ REG_LCD_DAH = (jzfb.blw << 16) | (jzfb.blw + jzfb.w); -+ REG_LCD_DAV = (0 << 16) | (stnH); -+ -+ /* AC BIAs signal */ -+ REG_LCD_PS = (0 << 16) | (stnH+jzfb.vsw+jzfb.efw+jzfb.bfw); -+ -+ break; -+ -+ case MODE_TFT_GEN: -+ case MODE_TFT_SHARP: -+ case MODE_TFT_CASIO: -+ case MODE_TFT_SAMSUNG: -+ case MODE_8BIT_SERIAL_TFT: -+ case MODE_TFT_18BIT: -+ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw; -+ REG_LCD_HSYNC = (0 << 16) | jzfb.hsw; -+ REG_LCD_DAV =((jzfb.vsw+jzfb.bfw) << 16) | (jzfb.vsw +jzfb.bfw+jzfb.h); -+ REG_LCD_DAH = ((jzfb.hsw + jzfb.blw) << 16) | (jzfb.hsw + jzfb.blw + jzfb.w ); -+ REG_LCD_VAT = (((jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw)) << 16) \ -+ | (jzfb.vsw + jzfb.bfw + jzfb.h + jzfb.efw); -+ break; -+ } -+ -+ switch (jzfb.cfg & MODE_MASK) { -+ case MODE_TFT_SAMSUNG: -+ { -+ unsigned int total, tp_s, tp_e, ckv_s, ckv_e; -+ unsigned int rev_s, rev_e, inv_s, inv_e; -+ -+ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) * -+ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */ -+ -+ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw; -+ tp_s = jzfb.blw + jzfb.w + 1; -+ tp_e = tp_s + 1; -+ ckv_s = tp_s - pclk/(1000000000/4100); -+ ckv_e = tp_s + total; -+ rev_s = tp_s - 11; /* -11.5 clk */ -+ rev_e = rev_s + total; -+ inv_s = tp_s; -+ inv_e = inv_s + total; -+ REG_LCD_CLS = (tp_s << 16) | tp_e; -+ REG_LCD_PS = (ckv_s << 16) | ckv_e; -+ REG_LCD_SPL = (rev_s << 16) | rev_e; -+ REG_LCD_REV = (inv_s << 16) | inv_e; -+ jzfb.cfg |= STFT_REVHI | STFT_SPLHI; -+ break; -+ } -+ case MODE_TFT_SHARP: -+ { -+ unsigned int total, cls_s, cls_e, ps_s, ps_e; -+ unsigned int spl_s, spl_e, rev_s, rev_e; -+ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw; -+ spl_s = 1; -+ spl_e = spl_s + 1; -+ cls_s = 0; -+ cls_e = total - 60; /* > 4us (pclk = 80ns) */ -+ ps_s = cls_s; -+ ps_e = cls_e; -+ rev_s = total - 40; /* > 3us (pclk = 80ns) */ -+ rev_e = rev_s + total; -+ jzfb.cfg |= STFT_PSHI; -+ REG_LCD_SPL = (spl_s << 16) | spl_e; -+ REG_LCD_CLS = (cls_s << 16) | cls_e; -+ REG_LCD_PS = (ps_s << 16) | ps_e; -+ REG_LCD_REV = (rev_s << 16) | rev_e; -+ break; -+ } -+ case MODE_TFT_CASIO: -+ break; -+ } -+ -+ /* Configure the LCD panel */ -+ REG_LCD_CFG = jzfb.cfg; -+ -+ /* Timing setting */ -+ __cpm_stop_lcd(); -+ -+ val = jzfb.fclk; /* frame clk */ -+ if ( (jzfb.cfg & MODE_MASK) != MODE_8BIT_SERIAL_TFT) { -+ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) * -+ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */ -+ } else { -+ /* serial mode: Hsync period = 3*Width_Pixel */ -+ pclk = val * (jzfb.w*3 + jzfb.hsw + jzfb.elw + jzfb.blw) * -+ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */ -+ } -+ -+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) || -+ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL)) -+ pclk = (pclk * 3); -+ -+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) || -+ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) || -+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_SINGLE) || -+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL)) -+ pclk = pclk >> ((jzfb.cfg & STN_DAT_PINMASK) >> 4); -+ -+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) || -+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL)) -+ pclk >>= 1; -+ -+ pll_div = (REG_CPM_CPCCR & CPM_CPCCR_PCS); /* clock source,0:pllout/2 1: pllout */ -+ pll_div = pll_div ? 1 : 2; -+ val = (__cpm_get_pllout() / pll_div) / pclk; -+ val--; -+ if (val > 0x1ff) { -+ printf("CPM_LPCDR too large, set it to 0x1ff\n"); -+ val = 0x1ff; -+ } -+ __cpm_set_pixdiv(val); -+ -+ val = pclk * 3 ; /* LCDClock > 2.5*Pixclock */ -+ if (val > 150000000) { -+ printf("Warning: LCDClock=%d\n, LCDClock must less or equal to 150MHz.\n", val); -+ printf("Change LCDClock to 150MHz\n"); -+ val = 150000000; -+ } -+ val = (__cpm_get_pllout() / pll_div) / val; -+ val--; -+ if (val > 0x1f) { -+ printf("CPM_CPCCR.LDIV too large, set it to 0x1f\n"); -+ val = 0x1f; -+ } -+ __cpm_set_ldiv( val ); -+ REG_CPM_CPCCR |= CPM_CPCCR_CE ; /* update divide */ -+ -+ __cpm_start_lcd(); -+ udelay(1000); -+ -+ REG_LCD_DA0 = fbi->fdadr0; /* frame descripter*/ -+ -+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) || -+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL)) -+ REG_LCD_DA1 = fbi->fdadr1; /* frame descripter*/ -+ -+ return 0; -+} -+ -+void lcd_ctrl_init (void *lcdbase) -+{ -+ __lcd_display_pin_init(); -+ __lcd_display_on() ; -+ -+ jz_lcd_init_mem(lcdbase, &panel_info); -+ jz_lcd_desc_init(&panel_info); -+ jz_lcd_hw_init(&panel_info); -+ -+} -+ -+/* -+ * Before enabled lcd controller, lcd registers should be configured correctly. -+ */ -+void lcd_enable (void) -+{ -+ REG_LCD_CTRL &= ~(1<<4); /* LCDCTRL.DIS */ -+ REG_LCD_CTRL |= 1<<3; /* LCDCTRL.ENA*/ -+} -+ -+void lcd_disable (void) -+{ -+ REG_LCD_CTRL |= (1<<4); -+} -+ -+void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) -+{ -+} -+ -+void lcd_initcolregs (void) -+{ -+} -diff --git a/drivers/video/nanonote_gpm940b0.h b/drivers/video/nanonote_gpm940b0.h -new file mode 100644 -index 0000000..efe491e ---- /dev/null -+++ b/drivers/video/nanonote_gpm940b0.h -@@ -0,0 +1,135 @@ -+/* -+ * JzRISC lcd controller -+ * -+ * Xiangfu Liu -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __QI_LB60_GPM940B0_H__ -+#define __QI_LB60_GPM940B0_H__ -+ -+struct lcd_desc{ -+ unsigned int next_desc; /* LCDDAx */ -+ unsigned int databuf; /* LCDSAx */ -+ unsigned int frame_id; /* LCDFIDx */ -+ unsigned int cmd; /* LCDCMDx */ -+}; -+ -+#define MODE_MASK 0x0f -+#define MODE_TFT_GEN 0x00 -+#define MODE_TFT_SHARP 0x01 -+#define MODE_TFT_CASIO 0x02 -+#define MODE_TFT_SAMSUNG 0x03 -+#define MODE_CCIR656_NONINT 0x04 -+#define MODE_CCIR656_INT 0x05 -+#define MODE_STN_COLOR_SINGLE 0x08 -+#define MODE_STN_MONO_SINGLE 0x09 -+#define MODE_STN_COLOR_DUAL 0x0a -+#define MODE_STN_MONO_DUAL 0x0b -+#define MODE_8BIT_SERIAL_TFT 0x0c -+ -+#define MODE_TFT_18BIT (1<<7) -+ -+#define STN_DAT_PIN1 (0x00 << 4) -+#define STN_DAT_PIN2 (0x01 << 4) -+#define STN_DAT_PIN4 (0x02 << 4) -+#define STN_DAT_PIN8 (0x03 << 4) -+#define STN_DAT_PINMASK STN_DAT_PIN8 -+ -+#define STFT_PSHI (1 << 15) -+#define STFT_CLSHI (1 << 14) -+#define STFT_SPLHI (1 << 13) -+#define STFT_REVHI (1 << 12) -+ -+#define SYNC_MASTER (0 << 16) -+#define SYNC_SLAVE (1 << 16) -+ -+#define DE_P (0 << 9) -+#define DE_N (1 << 9) -+ -+#define PCLK_P (0 << 10) -+#define PCLK_N (1 << 10) -+ -+#define HSYNC_P (0 << 11) -+#define HSYNC_N (1 << 11) -+ -+#define VSYNC_P (0 << 8) -+#define VSYNC_N (1 << 8) -+ -+#define DATA_NORMAL (0 << 17) -+#define DATA_INVERSE (1 << 17) -+ -+ -+/* Jz LCDFB supported I/O controls. */ -+#define FBIOSETBACKLIGHT 0x4688 -+#define FBIODISPON 0x4689 -+#define FBIODISPOFF 0x468a -+#define FBIORESET 0x468b -+#define FBIOPRINT_REG 0x468c -+ -+/* -+ * LCD panel specific definition -+ */ -+#define MODE (0xc9) /* 8bit serial RGB */ -+ -+#define __spi_write_reg1(reg, val) \ -+do { \ -+ unsigned char no; \ -+ unsigned short value; \ -+ unsigned char a=reg; \ -+ unsigned char b=val; \ -+ __gpio_set_pin(SPEN); \ -+ __gpio_set_pin(SPCK); \ -+ __gpio_clear_pin(SPDA); \ -+ __gpio_clear_pin(SPEN); \ -+ value=((a<<8)|(b&0xFF)); \ -+ for(no=0;no<16;no++) \ -+ { \ -+ __gpio_clear_pin(SPCK); \ -+ if((value&0x8000)==0x8000) \ -+ __gpio_set_pin(SPDA); \ -+ else \ -+ __gpio_clear_pin(SPDA); \ -+ __gpio_set_pin(SPCK); \ -+ value=(value<<1); \ -+ } \ -+ __gpio_set_pin(SPEN); \ -+} while (0) -+ -+#define __lcd_display_pin_init() \ -+do { \ -+ __cpm_start_tcu(); \ -+ __gpio_as_output(SPEN); /* use SPDA */ \ -+ __gpio_as_output(SPCK); /* use SPCK */ \ -+ __gpio_as_output(SPDA); /* use SPDA */ \ -+} while (0) -+ -+#define __lcd_display_on() \ -+do { \ -+ __spi_write_reg1(0x05, 0x1e); \ -+ __spi_write_reg1(0x05, 0x5e); \ -+ __spi_write_reg1(0x07, 0x8d); \ -+ __spi_write_reg1(0x13, 0x01); \ -+ __spi_write_reg1(0x05, 0x5f); \ -+} while (0) -+ -+#define __lcd_display_off() \ -+do { \ -+ __spi_write_reg1(0x05, 0x5e); \ -+} while (0) -+ -+#endif /* __QI_LB60_GPM940B0_H__ */ -diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h -index 52b370c..d3e78ad 100644 ---- a/include/configs/qi_lb60.h -+++ b/include/configs/qi_lb60.h -@@ -32,6 +32,13 @@ - * Miscellaneous configurable options - */ - #define CONFIG_NANONOTE -+ -+#define CONFIG_LCD -+#define CONFIG_SYS_WHITE_ON_BLACK -+#define LCD_BPP LCD_COLOR32 -+#define CONFIG_VIDEO_GPM940B0 -+ -+ - #define CONFIG_JZ4740_MMC - #define CONFIG_MMC 1 - #define CONFIG_FAT 1 -diff --git a/include/lcd.h b/include/lcd.h -index 42070d7..6de5482 100644 ---- a/include/lcd.h -+++ b/include/lcd.h -@@ -263,8 +263,44 @@ typedef struct vidinfo { - - void init_panel_info(vidinfo_t *vid); - --#else -+#elif defined(CONFIG_JZSOC) -+/* -+ * LCD controller stucture for JZSOC: JZ4740 -+ */ -+struct jz_fb_dma_descriptor { -+ u_long fdadr; /* Frame descriptor address register */ -+ u_long fsadr; /* Frame source address register */ -+ u_long fidr; /* Frame ID register */ -+ u_long ldcmd; /* Command register */ -+}; -+ -+/* -+ * Jz LCD info -+ */ -+struct jz_fb_info { -+ -+ u_long fdadr0; /* physical address of frame/palette descriptor */ -+ u_long fdadr1; /* physical address of frame descriptor */ -+ -+ /* DMA descriptors */ -+ struct jz_fb_dma_descriptor * dmadesc_fblow; -+ struct jz_fb_dma_descriptor * dmadesc_fbhigh; -+ struct jz_fb_dma_descriptor * dmadesc_palette; -+ u_long screen; /* address of frame buffer */ -+ u_long palette; /* address of palette memory */ -+ u_int palette_size; -+}; -+typedef struct vidinfo { -+ ushort vl_col; /* Number of columns (i.e. 640) */ -+ ushort vl_row; /* Number of rows (i.e. 480) */ -+ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ -+ -+ struct jz_fb_info jz_fb; -+} vidinfo_t; -+ -+extern vidinfo_t panel_info; - -+#else - typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 160) */ - ushort vl_row; /* Number of rows (i.e. 100) */ -@@ -318,6 +354,7 @@ void lcd_show_board_info(void); - #define LCD_COLOR4 2 - #define LCD_COLOR8 3 - #define LCD_COLOR16 4 -+#define LCD_COLOR32 5 - - /*----------------------------------------------------------------------*/ - #if defined(CONFIG_LCD_INFO_BELOW_LOGO) -@@ -369,7 +406,7 @@ void lcd_show_board_info(void); - # define CONSOLE_COLOR_GREY 14 - # define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ - --#else -+#elif LCD_BPP == LCD_COLOR16 - - /* - * 16bpp color definitions -@@ -377,6 +414,15 @@ void lcd_show_board_info(void); - # define CONSOLE_COLOR_BLACK 0x0000 - # define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ - -+#elif LCD_BPP == LCD_COLOR32 -+/* -+ * 18,24,32 bpp color definitions -+ */ -+# define CONSOLE_COLOR_BLACK 0x00000000 -+# define CONSOLE_COLOR_WHITE 0xffffffff /* Must remain last / highest */ -+ -+#else -+ - #endif /* color definitions */ - - /************************************************************************/ -@@ -406,7 +452,7 @@ void lcd_show_board_info(void); - #if LCD_BPP == LCD_MONOCHROME - # define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \ - (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7) --#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) -+#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) || (LCD_BPP == LCD_COLOR32) - # define COLOR_MASK(c) (c) - #else - # error Unsupported LCD BPP. --- -1.7.9.5 - diff --git a/package/boot/uboot-xburst/patches/0006-enable-silent-console.patch b/package/boot/uboot-xburst/patches/0006-enable-silent-console.patch deleted file mode 100644 index ebd6a6a7bf..0000000000 --- a/package/boot/uboot-xburst/patches/0006-enable-silent-console.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 5eb4d4c598f2806bd1b3d1140e917bfead7851ad Mon Sep 17 00:00:00 2001 -From: Xiangfu -Date: Wed, 10 Oct 2012 23:51:26 +0800 -Subject: [PATCH 6/6] enable silent console - ---- - common/console.c | 16 ++++++++++++++++ - include/configs/qi_lb60.h | 2 ++ - 2 files changed, 18 insertions(+) - -diff --git a/common/console.c b/common/console.c -index 1177f7d..e8a2078 100644 ---- a/common/console.c -+++ b/common/console.c -@@ -685,6 +685,14 @@ done: - - gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ - -+#ifdef CONFIG_SILENT_CONSOLE -+ /* Check one more time the contents of the silent environment -+ * variable, because if the environment is loaded from NAND it was -+ * not available when console_init_f() was called */ -+ if (getenv("silent") != NULL) -+ gd->flags |= GD_FLG_SILENT; -+#endif -+ - stdio_print_current_devices(); - - #ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE -@@ -760,6 +768,14 @@ int console_init_r(void) - - gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ - -+#ifdef CONFIG_SILENT_CONSOLE -+ /* Check one more time the contents of the silent environment -+ * variable, because if the environment is loaded from NAND it was -+ * not available when console_init_f() was called */ -+ if (getenv("silent") != NULL) -+ gd->flags |= GD_FLG_SILENT; -+#endif -+ - stdio_print_current_devices(); - - /* Setting environment variables */ -diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h -index d3e78ad..a3534ff 100644 ---- a/include/configs/qi_lb60.h -+++ b/include/configs/qi_lb60.h -@@ -102,6 +102,8 @@ - #define CONFIG_SYS_NO_FLASH - #define CONFIG_SYS_FLASH_BASE 0 /* init flash_base as 0 */ - -+#define CONFIG_SILENT_CONSOLE 1 /* Enable silent console */ -+ - /* - * Command line configuration - */ --- -1.7.9.5 - diff --git a/target/linux/xburst/Makefile b/target/linux/xburst/Makefile deleted file mode 100644 index 16d0b8b1b4..0000000000 --- a/target/linux/xburst/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# -# Copyright (C) 2009-2011 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mipsel -BOARD:=xburst -BOARDNAME:=Ingenic XBurst -FEATURES:=targz nand ubifs audio source-only -SUBTARGETS:=qi_lb60 - -KERNEL_PATCHVER:=3.18 - -DEVICE_TYPE:=other - -define Target/Description - Build firmware images for XBurst JZ47x0 based boards. -endef - -include $(INCLUDE_DIR)/target.mk - -$(eval $(call BuildTarget)) diff --git a/target/linux/xburst/base-files/etc/board.d/01_system b/target/linux/xburst/base-files/etc/board.d/01_system deleted file mode 100755 index 16f4987aae..0000000000 --- a/target/linux/xburst/base-files/etc/board.d/01_system +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -. /lib/functions/uci-defaults.sh - -board_config_update - -ucidef_set_hostname "BenNanoNote" -ucidef_set_ntpserver - -board_config_flush - -exit 0 diff --git a/target/linux/xburst/base-files/etc/config/fstab b/target/linux/xburst/base-files/etc/config/fstab deleted file mode 100644 index 522356112f..0000000000 --- a/target/linux/xburst/base-files/etc/config/fstab +++ /dev/null @@ -1,6 +0,0 @@ -config mount - option target /card - option device /dev/mmcblk0p1 - option fstype auto - option options rw,sync - option enabled 1 diff --git a/target/linux/xburst/base-files/etc/config/network b/target/linux/xburst/base-files/etc/config/network deleted file mode 100644 index a086003e32..0000000000 --- a/target/linux/xburst/base-files/etc/config/network +++ /dev/null @@ -1,13 +0,0 @@ -# Copyright (C) 2006 OpenWrt.org - -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname usb0 - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 diff --git a/target/linux/xburst/config-3.18 b/target/linux/xburst/config-3.18 deleted file mode 100644 index 099f5b0ed6..0000000000 --- a/target/linux/xburst/config-3.18 +++ /dev/null @@ -1,346 +0,0 @@ -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -# CONFIG_ARCH_HAS_SG_CHAIN is not set -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_BACKLIGHT_PWM is not set -CONFIG_BATTERY_JZ4740=y -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CHARGER_GPIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -CONFIG_CPU_MIPSR1=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CRC16=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_JZ4740=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_DW_DMAC_CORE is not set -CONFIG_EARLY_PRINTK=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_EXT4_FS=y -CONFIG_FAT_FS=y -CONFIG_FB=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_JZ4740=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_IMAGEBLIT=y -CONFIG_FONTS=y -# CONFIG_FONT_10x18 is not set -# CONFIG_FONT_6x10 is not set -CONFIG_FONT_6x11=y -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_SUN8x16 is not set -CONFIG_FONT_SUPPORT=y -CONFIG_FORCE_MAX_ZONEORDER=12 -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FREEZER=y -CONFIG_FS_MBCACHE=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HW_CONSOLE=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_INPUT=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_MATRIXKMAP=y -CONFIG_INPUT_MOUSE=y -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_PWM_BEEPER=y -CONFIG_INPUT_UINPUT=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_JZ4740_QI_LB60=y -CONFIG_KALLSYMS=y -CONFIG_KEXEC=y -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_MATRIX=y -# CONFIG_LCD_AMS369FG06 is not set -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_ILI8960=y -# CONFIG_LCD_L4F00242T03 is not set -# CONFIG_LCD_LD9040 is not set -# CONFIG_LCD_LMS283GF05 is not set -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_PLATFORM is not set -# CONFIG_LCD_S6E63M0 is not set -# CONFIG_LCD_TDO24M is not set -# CONFIG_LCD_VGG2432A4 is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=2 -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_JZ4740=y -CONFIG_MFD_CORE=y -CONFIG_MFD_JZ4740_ADC=y -CONFIG_MIPS=y -# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_JZ4740=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_CYAPA is not set -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_JZ4740=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_BLOCK is not set -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUSB_PIO_ONLY=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NLS=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_CODEPAGE_874=y -CONFIG_NLS_CODEPAGE_932=y -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_CODEPAGE_949=y -CONFIG_NLS_CODEPAGE_950=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_8=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -CONFIG_NOP_USB_XCEIV=y -# CONFIG_NO_IOPORT_MAP is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PM=y -CONFIG_PM_CLK=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_POWER_SUPPLY=y -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_RCU=y -CONFIG_PRINTK_TIME=y -CONFIG_PWM=y -CONFIG_PWM_JZ4740=y -CONFIG_PWM_SYSFS=y -# CONFIG_RCU_BOOST is not set -CONFIG_RCU_CPU_STALL_VERBOSE=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -CONFIG_RTC_DRV_JZ4740=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIO=y -CONFIG_SERIO_LIBPS2=y -CONFIG_SND=y -CONFIG_SND_COMPRESS_OFFLOAD=y -CONFIG_SND_DMAENGINE_PCM=y -# CONFIG_SND_EMU10K1_SEQ is not set -CONFIG_SND_JACK=y -CONFIG_SND_JZ4740_SOC=y -CONFIG_SND_JZ4740_SOC_I2S=y -CONFIG_SND_JZ4740_SOC_QI_LB60=y -# CONFIG_SND_OPL3_LIB_SEQ is not set -# CONFIG_SND_OPL4_LIB_SEQ is not set -CONFIG_SND_PCM=y -# CONFIG_SND_RAWMIDI_SEQ is not set -# CONFIG_SND_SBAWE_SEQ is not set -CONFIG_SND_SOC=y -# CONFIG_SND_SOC_FSL_SSI is not set -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -CONFIG_SND_SOC_I2C_AND_SPI=y -# CONFIG_SND_SOC_IMX_AUDMUX is not set -CONFIG_SND_SOC_JZ4740_CODEC=y -CONFIG_SND_TIMER=y -CONFIG_SOUND=y -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -# CONFIG_SQUASHFS is not set -# CONFIG_STAGING is not set -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SYN_COOKIES is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TREE_PREEMPT_RCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_USB=y -# CONFIG_USB_AUDIO is not set -CONFIG_USB_COMMON=y -# CONFIG_USB_EHCI_HCD is not set -CONFIG_USB_ETH=y -# CONFIG_USB_ETH_EEM is not set -# CONFIG_USB_ETH_RNDIS is not set -CONFIG_USB_F_ECM=y -CONFIG_USB_F_SUBSET=y -CONFIG_USB_GADGET=y -CONFIG_USB_LIBCOMPOSITE=y -# CONFIG_USB_MUSB_DUAL_ROLE is not set -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_HDRC=y -# CONFIG_USB_MUSB_HOST is not set -CONFIG_USB_MUSB_JZ4740=y -# CONFIG_USB_MUSB_TUSB6010 is not set -# CONFIG_USB_MUSB_UX500 is not set -CONFIG_USB_OTG_BLACKLIST_HUB=y -CONFIG_USB_PHY=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_U_ETHER=y -CONFIG_VFAT_FS=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_WATCHDOG is not set -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/xburst/image/Makefile b/target/linux/xburst/image/Makefile deleted file mode 100644 index ff25fbebcc..0000000000 --- a/target/linux/xburst/image/Makefile +++ /dev/null @@ -1,46 +0,0 @@ -# -# Copyright (C) 2009-2010 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -JFFS2_BLOCKSIZE=256k 512k - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -ifneq ($(CONFIG_TARGET_xburst_qi_lb60),) -UBI_OPTS = -m 4096 -p 512KiB -UBIFS_OPTS = -m 4096 -e 516096 -c 4095 -else -UBI_OPTS = -m 2048 -p 128KiB -s 512 -UBIFS_OPTS = -m 2048 -e 126KiB -c 4096 -endif - -UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage.bin - -define MkImageGzip - gzip -9n -c $(1) > $(1).gz - mkimage -A mips -O linux -T kernel -a 0x80010000 -C gzip \ - -e 0x80010000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ - -d $(1).gz $(2) -endef - -define Image/Prepare - $(call MkImageGzip,$(KDIR)/vmlinux,$(KDIR)/uimage) -endef - -define Image/BuildKernel - cp $(KDIR)/uimage $(UIMAGE) -endef - -define Image/Build/squashfs - $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) -endef - -define Image/Build - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/xburst/image/ubinize.cfg b/target/linux/xburst/image/ubinize.cfg deleted file mode 100644 index 49d55b9840..0000000000 --- a/target/linux/xburst/image/ubinize.cfg +++ /dev/null @@ -1,14 +0,0 @@ -[rootfs] -# Volume mode (other option is static) -mode=ubi -# Source image -image=root.ubifs -# Volume ID in UBI image -vol_id=0 -# Allow for dynamic resize -vol_type=dynamic -# Volume name -vol_name=rootfs -# Autoresize volume at first mount -vol_flags=autoresize - diff --git a/target/linux/xburst/modules.mk b/target/linux/xburst/modules.mk deleted file mode 100644 index 95cebdad6a..0000000000 --- a/target/linux/xburst/modules.mk +++ /dev/null @@ -1,40 +0,0 @@ - - -SOUND_MENU:=Sound Support - -define KernelPackage/sound-soc-jz4740 - SUBMENU:=$(SOUND_MENU) - DEPENDS:=kmod-sound-soc-core @TARGET_xburst @BROKEN - TITLE:=JZ4740 SoC sound support - KCONFIG:=CONFIG_SND_JZ4740_SOC CONFIG_SND_JZ4740_SOC_I2S - FILES:= \ - $(LINUX_DIR)/sound/soc/jz4740/snd-soc-jz4740.ko \ - $(LINUX_DIR)/sound/soc/jz4740/snd-soc-jz4740-i2s.ko - AUTOLOAD:=$(call AutoLoad,60,snd-soc-jz4740 snd-soc-jz4740-i2s) -endef - -define KernelPackage/sound-soc-jz4740-codec - SUBMENU:=$(SOUND_MENU) - DEPENDS:=kmod-sound-soc-core @TARGET_xburst @BROKEN - TITLE:=JZ4740 SoC internal codec support - KCONFIG:=CONFIG_SND_SOC_JZ4740_CODEC - FILES:=$(LINUX_DIR)/sound/soc/codecs/snd-soc-jz4740-codec.ko - AUTOLOAD:=$(call AutoLoad,60,snd-soc-jz4740-codec) -endef - -define KernelPackage/sound-soc-xburst/default - SUBMENU:=$(SOUND_MENU) - DEPENDS:=kmod-sound-soc-jz4740 kmod-sound-soc-jz4740-codec @TARGET_xburst_$(if $(4),$(4),$(3)) @BROKEN - TITLE:=$(1) sound support - KCONFIG:=CONFIG_SND_JZ4740_SOC_$(2) - FILES:=$(LINUX_DIR)/sound/soc/jz4740/snd-soc-$(3).ko - AUTOLOAD:=$(call AutoLoad,65,snd-soc-$(3)) -endef - -define KernelPackage/sound-soc-qilb60 -$(call KernelPackage/sound-soc-xburst/default,QI NanoNote,QI_LB60,qi-lb60,qi_lb60) -endef - -$(eval $(call KernelPackage,sound-soc-jz4740)) -$(eval $(call KernelPackage,sound-soc-jz4740-codec)) -$(eval $(call KernelPackage,sound-soc-qilb60)) diff --git a/target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch b/target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch deleted file mode 100644 index 93851d7283..0000000000 --- a/target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch +++ /dev/null @@ -1,20 +0,0 @@ -From b0eb5175e0de3e5134a36a7da382d8811562af12 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Tue, 15 Mar 2011 12:49:15 +0100 -Subject: [PATCH 1/7] ubi: Read only the vid header instead of the whole page - ---- - drivers/mtd/ubi/io.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/ubi/io.c -+++ b/drivers/mtd/ubi/io.c -@@ -1014,7 +1014,7 @@ int ubi_io_read_vid_hdr(struct ubi_devic - - p = (char *)vid_hdr - ubi->vid_hdr_shift; - read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset, -- ubi->vid_hdr_alsize); -+ UBI_VID_HDR_SIZE + ubi->vid_hdr_shift); - if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err)) - return read_err; - diff --git a/target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch b/target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch deleted file mode 100644 index ce87452a16..0000000000 --- a/target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 98d33db1c87e2447b9b203399d2f995e05ecdb52 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Sat, 26 Feb 2011 15:30:07 +0100 -Subject: [PATCH 2/7] NAND: Optimize NAND_ECC_HW_OOB_FIRST read - -Avoid sending unnecessary READ commands to the chip. ---- - drivers/mtd/nand/nand_base.c | 17 +++++++++++++---- - 1 file changed, 13 insertions(+), 4 deletions(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -1365,9 +1365,16 @@ static int nand_read_page_hwecc_oob_firs - unsigned int max_bitflips = 0; - - /* Read the OOB area first */ -- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); -- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); -+ /* Read the OOB area first */ -+ if (mtd->writesize > 512) { -+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page); -+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1); -+ } else { -+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); -+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); -+ } - - for (i = 0; i < chip->ecc.total; i++) - ecc_code[i] = chip->oob_poi[eccpos[i]]; -@@ -1580,7 +1587,9 @@ static int nand_do_read_ops(struct mtd_i - __func__, buf); - - read_retry: -- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); -+ if (chip->ecc.mode != NAND_ECC_HW_OOB_FIRST) { -+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); -+ } - - /* - * Now read the page into the buffer. Absent an error, diff --git a/target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch b/target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch deleted file mode 100644 index 65e739d479..0000000000 --- a/target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch +++ /dev/null @@ -1,104 +0,0 @@ -From 6031a240816d1c9a10f596d0648e586f6b878809 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Tue, 15 Mar 2011 12:33:41 +0100 -Subject: [PATCH 3/7] NAND: Add support for subpage reads for - NAND_ECC_HW_OOB_FIRST - ---- - drivers/mtd/nand/nand_base.c | 77 +++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 76 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -1398,6 +1398,75 @@ static int nand_read_page_hwecc_oob_firs - } - - /** -+ * nand_read_subpage_hwecc_oob_first - [REPLACABLE] hw ecc based sub-page read function -+ * @mtd: mtd info structure -+ * @chip: nand chip info structure -+ * @data_offs: offset of requested data within the page -+ * @readlen: data length -+ * @bufpoi: buffer to store read data -+ * @page: page number to read -+ * -+ * Hardware ECC for large page chips, require OOB to be read first. -+ * For this ECC mode, the write_page method is re-used from ECC_HW. -+ * These methods read/write ECC from the OOB area, unlike the -+ * ECC_HW_SYNDROME support with multiple ECC steps, follows the -+ * "infix ECC" scheme and reads/writes ECC from the data area, by -+ * overwriting the NAND manufacturer bad block markings. -+ */ -+static int nand_read_subpage_hwecc_oob_first(struct mtd_info *mtd, struct nand_chip *chip, -+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page) -+{ -+ int start_step, end_step, num_steps; -+ uint32_t *eccpos = chip->ecc.layout->eccpos; -+ uint8_t *p; -+ int data_col_addr; -+ int eccsize = chip->ecc.size; -+ int eccbytes = chip->ecc.bytes; -+ uint8_t *ecc_code = chip->buffers->ecccode; -+ uint8_t *ecc_calc = chip->buffers->ecccalc; -+ int i; -+ -+ /* Column address wihin the page aligned to ECC size */ -+ start_step = data_offs / chip->ecc.size; -+ end_step = (data_offs + readlen - 1) / chip->ecc.size; -+ num_steps = end_step - start_step + 1; -+ -+ data_col_addr = start_step * chip->ecc.size; -+ -+ /* Read the OOB area first */ -+ if (mtd->writesize > 512) { -+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page); -+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); -+ } else { -+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); -+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ chip->cmdfunc(mtd, NAND_CMD_READ0, data_col_addr, page); -+ } -+ -+ for (i = 0; i < chip->ecc.total; i++) -+ ecc_code[i] = chip->oob_poi[eccpos[i]]; -+ -+ p = bufpoi + data_col_addr; -+ -+ for (i = eccbytes * start_step; num_steps; num_steps--, i += eccbytes, p += eccsize) { -+ int stat; -+ -+ chip->ecc.hwctl(mtd, NAND_ECC_READ); -+ chip->read_buf(mtd, p, eccsize); -+ chip->ecc.calculate(mtd, p, &ecc_calc[i]); -+ -+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); -+ if (stat < 0) -+ mtd->ecc_stats.failed++; -+ else -+ mtd->ecc_stats.corrected += stat; -+ } -+ -+ return 0; -+} -+ -+/** - * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read - * @mtd: mtd info structure - * @chip: nand chip info structure -@@ -3961,8 +4030,14 @@ int nand_scan_tail(struct mtd_info *mtd) - pr_warn("No ECC functions supplied; hardware ECC not possible\n"); - BUG(); - } -- if (!ecc->read_page) -+ -+ if (!ecc->read_page) { - ecc->read_page = nand_read_page_hwecc_oob_first; -+ if (!ecc->read_subpage) { -+ ecc->read_subpage = nand_read_subpage_hwecc_oob_first; -+ chip->options |= NAND_SUBPAGE_READ; -+ } -+ } - - case NAND_ECC_HW: - /* Use standard hwecc read page function? */ diff --git a/target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch b/target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch deleted file mode 100644 index f2c26ade09..0000000000 --- a/target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 1a1095927d224403af8ad57c354cc64521bf3081 Mon Sep 17 00:00:00 2001 -From: Paul Cercueil -Date: Sat, 16 Jun 2012 19:36:31 +0200 -Subject: [PATCH 4/7] ASoC: JZ4740: delay activation of the DAC to work around - a sound bug. - -A proper fix of that bug would require a big rewrite of the driver, -which (I hope) will be done eventually. ---- - sound/soc/codecs/jz4740.c | 9 ++++++--- - 1 file changed, 6 insertions(+), 3 deletions(-) - ---- a/sound/soc/codecs/jz4740.c -+++ b/sound/soc/codecs/jz4740.c -@@ -249,12 +249,15 @@ static int jz4740_codec_set_bias_level(s - case SND_SOC_BIAS_ON: - break; - case SND_SOC_BIAS_PREPARE: -- mask = JZ4740_CODEC_1_VREF_DISABLE | -- JZ4740_CODEC_1_VREF_AMP_DISABLE | -- JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M; -+ mask = JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M; - value = 0; - - regmap_update_bits(regmap, JZ4740_REG_CODEC_1, mask, value); -+ -+ msleep(500); -+ mask = JZ4740_CODEC_1_VREF_DISABLE | -+ JZ4740_CODEC_1_VREF_AMP_DISABLE; -+ regmap_update_bits(regmap, JZ4740_REG_CODEC_1, mask, 0); - break; - case SND_SOC_BIAS_STANDBY: - /* The only way to clear the suspend flag is to reset the codec */ diff --git a/target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch b/target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch deleted file mode 100644 index f38483ab5c..0000000000 --- a/target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch +++ /dev/null @@ -1,55 +0,0 @@ -From f05b1ecd7e4fde7e69320a4b7be461636e982991 Mon Sep 17 00:00:00 2001 -From: Paul Cercueil -Date: Thu, 13 Sep 2012 00:09:20 +0200 -Subject: [PATCH 5/7] RTC: JZ4740: Init the "regulator" register on startup. - -This register controls the accuracy of the RTC. uC/OS-II use -the RTC as a 100Hz clock, and writes a completely wrong value -on that register, that we have to overwrite if we want a working -real-time clock. - -Signed-off-by: Paul Cercueil ---- - drivers/rtc/rtc-jz4740.c | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/drivers/rtc/rtc-jz4740.c -+++ b/drivers/rtc/rtc-jz4740.c -@@ -15,6 +15,7 @@ - */ - - #include -+#include - #include - #include - #include -@@ -216,6 +217,7 @@ static int jz4740_rtc_probe(struct platf - struct jz4740_rtc *rtc; - uint32_t scratchpad; - struct resource *mem; -+ struct clk *rtc_clk; - - rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL); - if (!rtc) -@@ -263,6 +265,21 @@ static int jz4740_rtc_probe(struct platf - } - } - -+ rtc_clk = clk_get(&pdev->dev, "rtc"); -+ if (IS_ERR(rtc_clk)) { -+ dev_err(&pdev->dev, "Failed to get RTC clock\n"); -+ return PTR_ERR(rtc_clk); -+ } -+ -+ /* TODO: initialize the ADJC bits (25:16) to fine-tune -+ * the accuracy of the RTC */ -+ ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_REGULATOR, -+ (clk_get_rate(rtc_clk) - 1) & 0xffff); -+ clk_put(rtc_clk); -+ -+ if (ret) -+ dev_warn(&pdev->dev, "Could not update RTC regulator register\n"); -+ - return 0; - } - diff --git a/target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch b/target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch deleted file mode 100644 index dc12d93409..0000000000 --- a/target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch +++ /dev/null @@ -1,309 +0,0 @@ -From 8741ead92bc93e66740237e51b88b8690ebcbba3 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Sun, 1 Aug 2010 21:19:40 +0200 -Subject: [PATCH 6/7] Add ili8960 lcd driver - -Includes the following changes from the jz-3.5 branch: -- Use module_spi_driver -- Use devm_kzalloc -- Use kstrtoul - -Signed-off-by: Lars-Peter Clausen ---- - drivers/video/backlight/Kconfig | 7 + - drivers/video/backlight/Makefile | 1 + - drivers/video/backlight/ili8960.c | 262 +++++++++++++++++++++++++++++++++++++ - 3 files changed, 270 insertions(+) - create mode 100644 drivers/video/backlight/ili8960.c - ---- a/drivers/video/backlight/Kconfig -+++ b/drivers/video/backlight/Kconfig -@@ -59,6 +59,13 @@ config LCD_LTV350QV - - The LTV350QV panel is present on all ATSTK1000 boards. - -+config LCD_ILI8960 -+ tristate "Ilitek ili8960 LCD driver" -+ depends on LCD_CLASS_DEVICE && SPI -+ default n -+ help -+ Driver for the Ilitek ili8960 LCD controller chip. -+ - config LCD_ILI922X - tristate "ILI Technology ILI9221/ILI9222 support" - depends on SPI ---- a/drivers/video/backlight/Makefile -+++ b/drivers/video/backlight/Makefile -@@ -5,6 +5,7 @@ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o - obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o - obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o - obj-$(CONFIG_LCD_HX8357) += hx8357.o -+obj-$(CONFIG_LCD_ILI8960) += ili8960.o - obj-$(CONFIG_LCD_ILI922X) += ili922x.o - obj-$(CONFIG_LCD_ILI9320) += ili9320.o - obj-$(CONFIG_LCD_L4F00242T03) += l4f00242t03.o ---- /dev/null -+++ b/drivers/video/backlight/ili8960.c -@@ -0,0 +1,262 @@ -+/* -+ * Copyright (C) 2009-2010, Lars-Peter Clausen -+ * Driver for Ilitek ili8960 LCD -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+struct ili8960 { -+ struct spi_device *spi; -+ struct lcd_device *lcd; -+ bool enabled; -+ unsigned int brightness; -+}; -+ -+#define ILI8960_REG_BRIGHTNESS 0x03 -+#define ILI8960_REG_POWER 0x05 -+#define ILI8960_REG_CONTRAST 0x0d -+ -+static int ili8960_write_reg(struct spi_device *spi, uint8_t reg, -+ uint8_t data) -+{ -+ uint8_t buf[2]; -+ buf[0] = ((reg & 0x40) << 1) | (reg & 0x3f); -+ buf[1] = data; -+ -+ return spi_write(spi, buf, sizeof(buf)); -+} -+ -+static int ili8960_programm_power(struct spi_device *spi, bool enabled) -+{ -+ int ret; -+ -+ if (enabled) -+ mdelay(20); -+ -+ ret = ili8960_write_reg(spi, ILI8960_REG_POWER, enabled ? 0xc7 : 0xc6); -+ -+ if (!enabled) -+ mdelay(20); -+ -+ return ret; -+} -+ -+static int ili8960_set_power(struct lcd_device *lcd, int power) -+{ -+ struct ili8960 *ili8960 = lcd_get_data(lcd); -+ -+ switch (power) { -+ case FB_BLANK_UNBLANK: -+ ili8960->enabled = true; -+ break; -+ default: -+ return 0; -+ } -+ -+ return ili8960_programm_power(ili8960->spi, ili8960->enabled); -+} -+ -+static int ili8960_early_set_power(struct lcd_device *lcd, int power) -+{ -+ struct ili8960 *ili8960 = lcd_get_data(lcd); -+ -+ switch (power) { -+ case FB_BLANK_UNBLANK: -+ return 0; -+ default: -+ ili8960->enabled = false; -+ break; -+ } -+ -+ return ili8960_programm_power(ili8960->spi, ili8960->enabled); -+} -+ -+static int ili8960_get_power(struct lcd_device *lcd) -+{ -+ struct ili8960 *ili8960 = lcd_get_data(lcd); -+ return ili8960->enabled ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN; -+} -+ -+static int ili8960_set_contrast(struct lcd_device *lcd, int contrast) -+{ -+ struct ili8960 *ili8960 = lcd_get_data(lcd); -+ -+ return ili8960_write_reg(ili8960->spi, ILI8960_REG_CONTRAST, contrast); -+} -+ -+static int ili8960_set_mode(struct lcd_device *lcd, struct fb_videomode *mode) -+{ -+ if (mode->xres != 320 && mode->yres != 240) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+static int ili8960_set_brightness(struct ili8960 *ili8960, int brightness) -+{ -+ int ret; -+ -+ ret = ili8960_write_reg(ili8960->spi, ILI8960_REG_BRIGHTNESS, brightness); -+ -+ if (ret == 0) -+ ili8960->brightness = brightness; -+ -+ return ret; -+} -+ -+static ssize_t ili8960_show_brightness(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct lcd_device *ld = to_lcd_device(dev); -+ struct ili8960 *ili8960 = lcd_get_data(ld); -+ -+ return sprintf(buf, "%u\n", ili8960->brightness); -+} -+ -+static ssize_t ili8960_store_brightness(struct device *dev, -+ struct device_attribute *attr, const char *buf, size_t count) -+{ -+ struct lcd_device *ld = to_lcd_device(dev); -+ struct ili8960 *ili8960 = lcd_get_data(ld); -+ unsigned long brightness; -+ int ret; -+ -+ ret = kstrtoul(buf, 0, &brightness); -+ if (ret) -+ return ret; -+ -+ if (brightness > 255) -+ return -EINVAL; -+ -+ ili8960_set_brightness(ili8960, brightness); -+ -+ return count; -+} -+ -+ -+static DEVICE_ATTR(brightness, 0644, ili8960_show_brightness, -+ ili8960_store_brightness); -+ -+static struct lcd_ops ili8960_lcd_ops = { -+ .set_power = ili8960_set_power, -+ .early_set_power = ili8960_early_set_power, -+ .get_power = ili8960_get_power, -+ .set_contrast = ili8960_set_contrast, -+ .set_mode = ili8960_set_mode, -+}; -+ -+static int ili8960_probe(struct spi_device *spi) -+{ -+ int ret; -+ struct ili8960 *ili8960; -+ -+ ili8960 = devm_kzalloc(&spi->dev, sizeof(*ili8960), GFP_KERNEL); -+ if (!ili8960) -+ return -ENOMEM; -+ -+ spi->bits_per_word = 8; -+ spi->mode = SPI_MODE_3; -+ -+ ret = spi_setup(spi); -+ if (ret) { -+ dev_err(&spi->dev, "Failed to setup spi\n"); -+ return ret; -+ } -+ -+ ili8960->spi = spi; -+ -+ ili8960->lcd = lcd_device_register("ili8960-lcd", &spi->dev, ili8960, -+ &ili8960_lcd_ops); -+ -+ if (IS_ERR(ili8960->lcd)) { -+ ret = PTR_ERR(ili8960->lcd); -+ dev_err(&spi->dev, "Failed to register lcd device: %d\n", ret); -+ return ret; -+ } -+ -+ ili8960->lcd->props.max_contrast = 255; -+ -+ ret = device_create_file(&ili8960->lcd->dev, &dev_attr_brightness); -+ if (ret) -+ goto err_unregister_lcd; -+ -+ ili8960_programm_power(ili8960->spi, true); -+ ili8960->enabled = true; -+ -+ spi_set_drvdata(spi, ili8960); -+ -+ ili8960_write_reg(spi, 0x13, 0x01); -+ -+ return 0; -+err_unregister_lcd: -+ lcd_device_unregister(ili8960->lcd); -+ return ret; -+} -+ -+static int ili8960_remove(struct spi_device *spi) -+{ -+ struct ili8960 *ili8960 = spi_get_drvdata(spi); -+ -+ device_remove_file(&ili8960->lcd->dev, &dev_attr_brightness); -+ lcd_device_unregister(ili8960->lcd); -+ -+ spi_set_drvdata(spi, NULL); -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+ -+static int ili8960_suspend(struct spi_device *spi, pm_message_t state) -+{ -+ struct ili8960 *ili8960 = spi_get_drvdata(spi); -+ -+ if (ili8960->enabled) -+ ili8960_programm_power(ili8960->spi, false); -+ -+ return 0; -+} -+ -+static int ili8960_resume(struct spi_device *spi) -+{ -+ struct ili8960 *ili8960 = spi_get_drvdata(spi); -+ -+ if (ili8960->enabled) -+ ili8960_programm_power(ili8960->spi, true); -+ -+ return 0; -+} -+ -+#else -+#define ili8960_suspend NULL -+#define ili8960_resume NULL -+#endif -+ -+static struct spi_driver ili8960_driver = { -+ .driver = { -+ .name = "ili8960", -+ .owner = THIS_MODULE, -+ }, -+ .probe = ili8960_probe, -+ .remove = ili8960_remove, -+ .suspend = ili8960_suspend, -+ .resume = ili8960_resume, -+}; -+module_spi_driver(ili8960_driver); -+ -+MODULE_AUTHOR("Lars-Peter Clausen"); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("LCD driver for Ilitek ili8960"); -+MODULE_ALIAS("spi:ili8960"); diff --git a/target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch b/target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch deleted file mode 100644 index fd89ad3bca..0000000000 --- a/target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 4371d60ae342c76708c4317e06fb7dcf0159c2f1 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Wed, 13 Oct 2010 01:17:24 +0200 -Subject: [PATCH 7/7] qi_lb60: Don't use 3-wire spi mode for the display for - now - -The spi_gpio driver does not support 3-wire mode. ---- - arch/mips/jz4740/board-qi_lb60.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/arch/mips/jz4740/board-qi_lb60.c -+++ b/arch/mips/jz4740/board-qi_lb60.c -@@ -313,7 +313,6 @@ static struct spi_board_info qi_lb60_spi - .chip_select = 0, - .bus_num = 1, - .max_speed_hz = 30 * 1000, -- .mode = SPI_3WIRE, - }, - }; - diff --git a/target/linux/xburst/qi_lb60/config-default b/target/linux/xburst/qi_lb60/config-default deleted file mode 100644 index 1fd421b5fc..0000000000 --- a/target/linux/xburst/qi_lb60/config-default +++ /dev/null @@ -1,33 +0,0 @@ -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_INPUT_MATRIXKMAP=y -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_MATRIX=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_ILI8960=y -# CONFIG_LCD_L4F00242T03 is not set -# CONFIG_LCD_LMS283GF05 is not set -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_PLATFORM is not set -# CONFIG_LCD_TDO24M is not set -# CONFIG_LCD_VGG2432A4 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_REGMAP_SPI=y -CONFIG_SND_HWDEP=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_SEQUENCER=y -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_SEQ_DUMMY=y -# CONFIG_SND_VIRMIDI is not set -CONFIG_SOUND_OSS_CORE=y -CONFIG_SOUND_OSS_CORE_PRECLAIM=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -# CONFIG_USB_FUSB300 is not set -CONFIG_USB_JZ4740=y diff --git a/target/linux/xburst/qi_lb60/target.mk b/target/linux/xburst/qi_lb60/target.mk deleted file mode 100644 index 8ae71bd9cb..0000000000 --- a/target/linux/xburst/qi_lb60/target.mk +++ /dev/null @@ -1 +0,0 @@ -BOARDNAME:=QI Ben Nanonote (qi_lb60)