From: John Crispin Date: Sat, 3 May 2008 15:48:42 +0000 (+0000) Subject: remove old etrax patches X-Git-Tag: reboot~26611 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6720686d55dd6f13cf527c087f67ee27cb74592a;p=openwrt%2Fstaging%2Fjogo.git remove old etrax patches SVN-Revision: 11027 --- diff --git a/target/linux/etrax/patches/cris/001-include-cris.patch b/target/linux/etrax/patches/cris/001-include-cris.patch deleted file mode 100644 index f384684414..0000000000 --- a/target/linux/etrax/patches/cris/001-include-cris.patch +++ /dev/null @@ -1,4551 +0,0 @@ -diff -urN linux-2.6.19.2.old/include/asm-cris/Kbuild linux-2.6.19.2.dev/include/asm-cris/Kbuild ---- linux-2.6.19.2.old/include/asm-cris/Kbuild 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/Kbuild 2007-02-09 16:51:34.000000000 +0100 -@@ -3,3 +3,6 @@ - header-y += arch-v10/ arch-v32/ - - unifdef-y += rs485.h -+unifdef-y += ethernet.h -+unifdef-y += etraxgpio.h -+unifdef-y += rtc.h -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/Kbuild linux-2.6.19.2.dev/include/asm-cris/arch-v10/Kbuild ---- linux-2.6.19.2.old/include/asm-cris/arch-v10/Kbuild 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/Kbuild 2007-02-26 21:03:05.000000000 +0100 -@@ -1,2 +1,5 @@ - header-y += ptrace.h - header-y += user.h -+header-y += svinto.h -+header-y += sv_addr_ag.h -+header-y += sv_addr.agh -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/bug.h linux-2.6.19.2.dev/include/asm-cris/arch-v10/bug.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v10/bug.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/bug.h 2006-06-21 10:29:16.000000000 +0200 -@@ -0,0 +1,66 @@ -+#ifndef __ASM_CRIS_ARCH_BUG_H -+#define __ASM_CRIS_ARCH_BUG_H -+ -+#include -+ -+#ifdef CONFIG_BUG -+#ifdef CONFIG_DEBUG_BUGVERBOSE -+/* The BUG() macro is used for marking obviously incorrect code paths. -+ * It will cause a message with the file name and line number to be printed, -+ * and then cause an oops. The message is actually printed by handle_BUG() -+ * in arch/cris/kernel/traps.c, and the reason we use this method of storing -+ * the file name and line number is that we do not want to affect the registers -+ * by calling printk() before causing the oops. -+ */ -+ -+#define BUG_PREFIX 0x0D7F -+#define BUG_MAGIC 0x00001234 -+ -+struct bug_frame { -+ unsigned short prefix; -+ unsigned int magic; -+ unsigned short clear; -+ unsigned short movu; -+ unsigned short line; -+ unsigned short jump; -+ unsigned char* filename; -+}; -+ -+#if 0 -+/* Unfortunately this version of the macro does not work due to a problem -+ * with the compiler (aka a bug) when compiling with -O2, which sometimes -+ * erroneously causes the second input to be stored in a register... -+ */ -+#define BUG() \ -+ __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ -+ "movu.w %0,$r0\n\t" \ -+ "jump %1\n\t" \ -+ : : "i" (__LINE__), "i" (__FILE__)) -+#else -+/* This version will have to do for now, until the compiler is fixed. -+ * The drawbacks of this version are that the file name will appear multiple -+ * times in the .rodata section, and that __LINE__ and __FILE__ can probably -+ * not be used like this with newer versions of gcc. -+ */ -+#define BUG() \ -+ __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ -+ "movu.w " __stringify(__LINE__) ",$r0\n\t"\ -+ "jump 0f\n\t" \ -+ ".section .rodata\n" \ -+ "0:\t.string \"" __FILE__ "\"\n\t" \ -+ ".previous") -+#endif -+ -+#else -+ -+/* This just causes an oops. */ -+#define BUG() (*(int *)0 = 0) -+ -+#endif -+ -+#define HAVE_ARCH_BUG -+#endif -+ -+#include -+ -+#endif -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/ide.h linux-2.6.19.2.dev/include/asm-cris/arch-v10/ide.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v10/ide.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/ide.h 2005-08-23 11:44:36.000000000 +0200 -@@ -32,7 +32,7 @@ - * together in a hwgroup, and will serialize accesses. this is good, because - * we can't access more than one interface at the same time on ETRAX100. - */ -- return 4; -+ return 4; - } - - static inline unsigned long ide_default_io_base(int index) -@@ -61,15 +61,15 @@ - /* fill in ports for ATA addresses 0 to 7 */ - - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { -- hw->io_ports[i] = data_port | -- IO_FIELD(R_ATA_CTRL_DATA, addr, i) | -+ hw->io_ports[i] = data_port | -+ IO_FIELD(R_ATA_CTRL_DATA, addr, i) | - IO_STATE(R_ATA_CTRL_DATA, cs0, active); - } - - /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */ - - hw->io_ports[IDE_CONTROL_OFFSET] = data_port | -- IO_FIELD(R_ATA_CTRL_DATA, addr, 6) | -+ IO_FIELD(R_ATA_CTRL_DATA, addr, 6) | - IO_STATE(R_ATA_CTRL_DATA, cs1, active); - - /* whats this for ? */ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/io.h linux-2.6.19.2.dev/include/asm-cris/arch-v10/io.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v10/io.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/io.h 2007-03-06 12:16:16.000000000 +0100 -@@ -56,6 +56,9 @@ - #define LED_RED 0x02 - #define LED_ORANGE (LED_GREEN | LED_RED) - -+#if defined(CONFIG_ETRAX_NO_LEDS) -+#define LED_NETWORK_SET(x) -+#else - #if CONFIG_ETRAX_LED1G == CONFIG_ETRAX_LED1R - #define LED_NETWORK_SET(x) \ - do { \ -@@ -80,6 +83,7 @@ - LED_ACTIVE_SET_R((x) & LED_RED); \ - } while (0) - #endif -+#endif - - #ifdef CONFIG_ETRAX_PA_LEDS - #define LED_NETWORK_SET_G(x) \ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/juliette.h linux-2.6.19.2.dev/include/asm-cris/arch-v10/juliette.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v10/juliette.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/juliette.h 2004-06-03 11:28:57.000000000 +0200 -@@ -0,0 +1,328 @@ -+#ifndef _ASM_JULIETTE_H -+#define _ASM_JULIETTE_H -+ -+#include -+ -+/* juliette _IOC_TYPE, bits 8 to 15 in ioctl cmd */ -+ -+#define JULIOCTYPE 42 -+ -+/* supported ioctl _IOC_NR's */ -+ -+#define JULSTARTDMA 0x1 /* start a picture asynchronously */ -+ -+/* set parameters */ -+ -+#define SETDEFAULT 0x2 /* CCD/VIDEO/SS1M */ -+#define SETPARAMETERS 0x3 /* CCD/VIDEO */ -+#define SETSIZE 0x4 /* CCD/VIDEO/SS1M */ -+#define SETCOMPRESSION 0x5 /* CCD/VIDEO/SS1M */ -+#define SETCOLORLEVEL 0x6 /* CCD/VIDEO */ -+#define SETBRIGHTNESS 0x7 /* CCD */ -+#define SETROTATION 0x8 /* CCD */ -+#define SETTEXT 0x9 /* CCD/VIDEO/SS1M */ -+#define SETCLOCK 0xa /* CCD/VIDEO/SS1M */ -+#define SETDATE 0xb /* CCD/VIDEO/SS1M */ -+#define SETTIMEFORMAT 0xc /* CCD/VIDEO/SS1M */ -+#define SETDATEFORMAT 0xd /* VIDEO */ -+#define SETTEXTALIGNMENT 0xe /* VIDEO */ -+#define SETFPS 0xf /* CCD/VIDEO/SS1M */ -+#define SETVGA 0xff /* VIDEO */ -+#define SETCOMMENT 0xfe /* CCD/VIDEO */ -+ -+/* get parameters */ -+ -+#define GETDRIVERTYPE 0x10 /* CCD/VIDEO/SS1M */ -+#define GETNBROFCAMERAS 0x11 /* CCD/VIDEO/SS1M */ -+#define GETPARAMETERS 0x12 /* CCD/VIDEO/SS1M */ -+#define GETBUFFERSIZE 0x13 /* CCD/VIDEO/SS1M */ -+#define GETVIDEOTYPE 0x14 /* VIDEO/SS1M */ -+#define GETVIDEOSIGNAL 0x15 /* VIDEO */ -+#define GETMODULATION 0x16 /* VIDEO */ -+#define GETDCYVALUES 0xa0 /* CCD /SS1M */ -+#define GETDCYWIDTH 0xa1 /* CCD /SS1M */ -+#define GETDCYHEIGHT 0xa2 /* CCD /SS1M */ -+#define GETSIZE 0xa3 /* CCD/VIDEO */ -+#define GETCOMPRESSION 0xa4 /* CCD/VIDEO */ -+ -+/* detect and get parameters */ -+ -+#define DETECTMODULATION 0x17 /* VIDEO */ -+#define DETECTVIDEOTYPE 0x18 /* VIDEO */ -+#define DETECTVIDEOSIGNAL 0x19 /* VIDEO */ -+ -+/* configure default parameters */ -+ -+#define CONFIGUREDEFAULT 0x20 /* CCD/VIDEO/SS1M */ -+#define DEFSIZE 0x21 /* CCD/VIDEO/SS1M */ -+#define DEFCOMPRESSION 0x22 /* CCD/VIDEO/SS1M */ -+#define DEFCOLORLEVEL 0x23 /* CCD/VIDEO */ -+#define DEFBRIGHTNESS 0x24 /* CCD */ -+#define DEFROTATION 0x25 /* CCD */ -+#define DEFWHITEBALANCE 0x26 /* CCD */ -+#define DEFEXPOSURE 0x27 /* CCD */ -+#define DEFAUTOEXPWINDOW 0x28 /* CCD */ -+#define DEFTEXT 0x29 /* CCD/VIDEO/SS1M */ -+#define DEFCLOCK 0x2a /* CCD/VIDEO/SS1M */ -+#define DEFDATE 0x2b /* CCD/VIDEO/SS1M */ -+#define DEFTIMEFORMAT 0x2c /* CCD/VIDEO/SS1M */ -+#define DEFDATEFORMAT 0x2d /* VIDEO */ -+#define DEFTEXTALIGNMENT 0x2e /* VIDEO */ -+#define DEFFPS 0x2f /* CCD/VIDEO/SS1M */ -+#define DEFTEXTSTRING 0x30 /* CCD/VIDEO/SS1M */ -+#define DEFHEADERINFO 0x31 /* CCD/VIDEO/SS1M */ -+#define DEFWEXAR 0x32 /* CCD */ -+#define DEFLINEDELAY 0x33 /* CCD */ -+#define DEFDISABLEDVIDEO 0x34 /* VIDEO */ -+#define DEFVIDEOTYPE 0x35 /* VIDEO */ -+#define DEFMODULATION 0x36 /* VIDEO */ -+#define DEFXOFFSET 0x37 /* VIDEO */ -+#define DEFYOFFSET 0x38 /* VIDEO */ -+#define DEFYCMODE 0x39 /* VIDEO */ -+#define DEFVCRMODE 0x3a /* VIDEO */ -+#define DEFSTOREDCYVALUES 0x3b /* CCD/VIDEO/SS1M */ -+#define DEFWCDS 0x3c /* CCD */ -+#define DEFVGA 0x3d /* VIDEO */ -+#define DEFCOMMENT 0x3e /* CCD/VIDEO */ -+#define DEFCOMMENTSIZE 0x3f /* CCD/VIDEO */ -+#define DEFCOMMENTTEXT 0x50 /* CCD/VIDEO */ -+#define DEFSTOREDCYTEXT 0x51 /* VIDEO */ -+ -+ -+#define JULABORTDMA 0x70 /* Abort current DMA transfer */ -+ -+/* juliette general i/o port */ -+ -+#define JIO_READBITS 0x40 /* read and return current port bits */ -+#define JIO_SETBITS 0x41 /* set bits marked by 1 in the argument */ -+#define JIO_CLRBITS 0x42 /* clr bits marked by 1 in the argument */ -+#define JIO_READDIR 0x43 /* read direction, 0=input 1=output */ -+#define JIO_SETINPUT 0x44 /* set direction, 0=unchanged 1=input -+ returns current dir */ -+#define JIO_SETOUTPUT 0x45 /* set direction, 0=unchanged 1=output -+ returns current dir */ -+ -+/**** YumYum internal adresses ****/ -+ -+/* Juliette buffer addresses */ -+ -+#define BUFFER1_VIDEO 0x1100 -+#define BUFFER2_VIDEO 0x2800 -+#define ACDC_BUFF_VIDEO 0x0aaa -+#define BUFFER1 0x1700 -+#define BUFFER2 0x2b01 -+#define ACDC_BUFFER 0x1200 -+#define BUFFER1_SS1M 0x1100 -+#define BUFFER2_SS1M 0x2800 -+#define ACDC_BUFF_SS1M 0x0900 -+ -+/* Juliette parameter memory addresses */ -+ -+#define PA_BUFFER_CNT 0x3f09 /* CCD/VIDEO */ -+#define PA_CCD_BUFFER 0x3f10 /* CCD */ -+#define PA_VIDEO_BUFFER 0x3f10 /* VIDEO */ -+#define PA_DCT_BUFFER 0x3f11 /* CCD/VIDEO */ -+#define PA_TEMP 0x3f12 /* CCD/VIDEO */ -+#define PA_VIDEOLINE_RD 0x3f13 /* VIDEO */ -+#define PA_VIDEOLINE_WR 0x3f14 /* VIDEO */ -+#define PA_VI_HDELAY0 0x3f15 /* VIDEO */ -+#define PA_VI_VDELAY0 0x3f16 /* VIDEO */ -+#define PA_VI_HDELAY1 0x3f17 /* VIDEO */ -+#define PA_VI_VDELAY1 0x3f18 /* VIDEO */ -+#define PA_VI_HDELAY2 0x3f19 /* VIDEO */ -+#define PA_VI_VDELAY2 0x3f1a /* VIDEO */ -+#define PA_VI_HDELAY3 0x3f1b /* VIDEO */ -+#define PA_VI_VDELAY3 0x3f1c /* VIDEO */ -+#define PA_VI_CTRL 0x3f20 /* VIDEO */ -+#define PA_JPEG_CTRL 0x3f22 /* CCD/VIDEO */ -+#define PA_BUFFER_SIZE 0x3f24 /* CCD/VIDEO */ -+#define PA_PAL_NTSC 0x3f25 /* VIDEO */ -+#define PA_MACROBLOCKS 0x3f26 /* CCD/VIDEO */ -+#define PA_COLOR 0x3f27 /* VIDEO */ -+#define PA_MEMCH1CNT2 0x3f28 /* CCD/VIDEO */ -+#define PA_MEMCH1CNT3 0x3f29 /* VIDEO */ -+#define PA_MEMCH1STR2 0x3f2a /* CCD/VIDEO */ -+#define PA_MEMCH1STR3 0x3f2b /* VIDEO */ -+#define PA_BUFFERS 0x3f2c /* CCD/VIDEO */ -+#define PA_PROGRAM 0x3f2d /* CCD/VIDEO */ -+#define PA_ROTATION 0x3f2e /* CCD */ -+#define PA_PC 0x3f30 /* CCD/VIDEO */ -+#define PA_PC2 0x3f31 /* VIDEO */ -+#define PA_ODD_LINE 0x3f32 /* VIDEO */ -+#define PA_EXP_DELAY 0x3f34 /* CCD */ -+#define PA_MACROBLOCK_CNT 0x3f35 /* CCD/VIDEO */ -+#define PA_DRAM_PTR1_L 0x3f36 /* CCD/VIDEO */ -+#define PA_CLPOB_CNT 0x3f37 /* CCD */ -+#define PA_DRAM_PTR1_H 0x3f38 /* CCD/VIDEO */ -+#define PA_DRAM_PTR2_L 0x3f3a /* VIDEO */ -+#define PA_DRAM_PTR2_H 0x3f3c /* VIDEO */ -+#define PA_CCD_LINE_CNT 0x3f3f /* CCD */ -+#define PA_VIDEO_LINE_CNT 0x3f3f /* VIDEO */ -+#define PA_TEXT 0x3f41 /* CCD/VIDEO */ -+#define PA_CAMERA_CHANGED 0x3f42 /* VIDEO */ -+#define PA_TEXTALIGNMENT 0x3f43 /* VIDEO */ -+#define PA_DISABLED 0x3f44 /* VIDEO */ -+#define PA_MACROBLOCKTEXT 0x3f45 /* VIDEO */ -+#define PA_VGA 0x3f46 /* VIDEO */ -+#define PA_ZERO 0x3ffe /* VIDEO */ -+#define PA_NULL 0x3fff /* CCD/VIDEO */ -+ -+typedef enum { -+ jpeg = 0, -+ dummy = 1 -+} request_type; -+ -+typedef enum { -+ hugesize = 0, -+ fullsize = 1, -+ halfsize = 2, -+ fieldsize = 3 -+} size_type; -+ -+typedef enum { -+ min = 0, -+ low = 1, -+ medium = 2, -+ high = 3, -+ very_high = 4, -+ very_low = 5, -+ q1 = 6, -+ q2 = 7, -+ q3 = 8, -+ q4 = 9, -+ q5 = 10, -+ q6 = 11 -+} compr_type; -+ -+typedef enum { -+ deg_0 = 0, -+ deg_180 = 1, -+ deg_90 = 2, -+ deg_270 = 3 -+} rotation_type; -+ -+typedef enum { -+ auto_white = 0, -+ hold = 1, -+ fixed_outdoor = 2, -+ fixed_indoor = 3, -+ fixed_fluor = 4 -+} white_balance_type; -+ -+typedef enum { -+ auto_exp = 0, -+ fixed_exp = 1 -+} exposure_type; -+ -+typedef enum { -+ no_window = 0, -+ center = 1, -+ top = 2, -+ lower = 3, -+ left = 4, -+ right = 5, -+ spot = 6, -+ cw = 7 -+} exp_window_type; -+ -+typedef enum { -+ h_24 = 0, -+ h_12 = 1, -+ h_24P = 2 -+} hour_type; -+ -+typedef enum { -+ standard = 0, -+ YYYY_MM_DD = 1, -+ Www_Mmm_DD_YYYY = 2, -+ Www_DD_MM_YYYY = 3 -+} date_type; -+ -+typedef enum { -+ left_align = 0, -+ center_align = 1, -+ right_align = 2 -+} alignment_type; -+ -+typedef enum { -+ off = 0, -+ on = 1, -+ no = 0, -+ yes = 1 -+} enable_type; -+ -+typedef enum { -+ disabled = 0, -+ enabled = 1, -+ extended = 2 -+} comment_type; -+ -+typedef enum { -+ pal = 0, -+ ntsc = 1 -+} video_type; -+ -+typedef enum { -+ pal_bghi_ntsc_m = 0, -+ ntsc_4_43_50hz_pal_4_43_60hz = 1, -+ pal_n_ntsc_4_43_60hz = 2, -+ ntsc_n_pal_m = 3, -+ secam_pal_4_43_60hz = 4 -+} modulation_type; -+ -+typedef enum { -+ cam0 = 0, -+ cam1 = 1, -+ cam2 = 2, -+ cam3 = 3, -+ quad = 32 -+} camera_type; -+ -+typedef enum { -+ video_driver = 0, -+ ccd_driver = 1 -+} driver_type; -+ -+struct jul_param { -+ request_type req_type; -+ size_type size; -+ compr_type compression; -+ rotation_type rotation; -+ int color_level; -+ int brightness; -+ white_balance_type white_balance; -+ exposure_type exposure; -+ exp_window_type auto_exp_window; -+ hour_type time_format; -+ date_type date_format; -+ alignment_type text_alignment; -+ enable_type text; -+ enable_type clock; -+ enable_type date; -+ enable_type fps; -+ enable_type vga; -+ enable_type comment; -+}; -+ -+struct video_param { -+ enable_type disabled; -+ modulation_type modulation; -+ video_type video; -+ enable_type signal; -+ enable_type vcr; -+ int xoffset; -+ int yoffset; -+}; -+ -+/* The juliette_request structure is used during the JULSTARTDMA asynchronous -+ * picture-taking ioctl call as an argument to specify a buffer which will get -+ * the final picture. -+ */ -+ -+struct juliette_request { -+ char *buf; /* Pointer to the buffer to hold picture data */ -+ unsigned int buflen; /* Length of the above buffer */ -+ unsigned int size; /* Resulting length, 0 if the picture is not ready */ -+}; -+ -+#endif -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/Kbuild linux-2.6.19.2.dev/include/asm-cris/arch-v32/Kbuild ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/Kbuild 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/Kbuild 2007-02-09 16:51:34.000000000 +0100 -@@ -1,2 +1,3 @@ - header-y += ptrace.h - header-y += user.h -+header-y += cryptocop.h -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/arbiter.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/arbiter.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/arbiter.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/arbiter.h 2006-10-13 14:45:18.000000000 +0200 -@@ -22,6 +22,7 @@ - - int crisv32_arbiter_allocate_bandwidth(int client, int region, - unsigned long bandwidth); -+void crisv32_arbiter_deallocate_bandwidth(int client, int region); - int crisv32_arbiter_watch(unsigned long start, unsigned long size, - unsigned long clients, unsigned long accesses, - watch_callback* cb); -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/bitops.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/bitops.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/bitops.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/bitops.h 2005-08-23 11:44:37.000000000 +0200 -@@ -16,7 +16,7 @@ - __asm__ __volatile__ ("swapnwbr %0\n\t" - "lz %0,%0" - : "=r" (res) : "0" (w)); -- -+ - return res; - } - -@@ -28,7 +28,7 @@ - __asm__ __volatile__ ("swapwbr %0\n\t" - "lz %0,%0" - : "=r" (res) : "0" (w)); -- -+ - return res; - } - -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/board.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/board.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/board.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/board.h 2007-01-29 15:05:01.000000000 +0100 -@@ -0,0 +1,74 @@ -+/* -+ * linux/include/asm-cris/arch-v32/board.h -+ * -+ * Types for board-specific data. -+ * -+ * Copyright (C) 2007 Axis Communications AB -+ */ -+ -+#ifndef __ARCH_V32_BOARD_H -+#define __ARCH_V32_BOARD_H -+ -+/* A tuple for a regi base and an interrupt. */ -+struct crisv32_regi_n_int { -+ u32 regi; -+ u32 irq; -+}; -+ -+/* -+ * SPI and SD/MMC types, arranged such that the data for mmc_spi is an -+ * add-on to SPI; the SPI data does not contain anything about SD/MMC -+ * and the SPI controller driver can't access it. SPI data is -+ * arranged to allow sharing common functions between SSER and GPIO. -+ */ -+ -+/* Hardware identification for the bitbanged GPIO SPI controller. */ -+struct crisv32_spi_gpio_controller_data { -+ /* Names of the pins. */ -+ const char *cs; -+ const char *miso; -+ const char *mosi; -+ const char *sclk; -+}; -+ -+/* Similar for the SSER SPI controller. */ -+struct crisv32_spi_sser_controller_data { -+ /* How to connect pins and claim the SSER interface and the DMA -+ channels. */ -+ int (*iface_allocate)(struct crisv32_regi_n_int *sser, -+ struct crisv32_regi_n_int *dmain, -+ struct crisv32_regi_n_int *dmaout); -+ void (*iface_free)(void); -+ -+ /* Whether DMA is to be used. */ -+ int using_dma; -+}; -+ -+struct crisv32_mmc_spi_pinstate; -+ -+/* -+ * Regardless of SPI controller, these pins are needed in addition to -+ * the SPI pins when the used as a SD/MMC SPI controller. -+ */ -+struct crisv32_mmc_spi_pindata { -+ /* Names of the pins. */ -+ const char *card_detect; -+ const char *write_protect; -+ -+ /* Related private state to interface to the mmc_spi API. */ -+ struct crisv32_mmc_spi_pinstate *pinstate; -+}; -+ -+/* When SD/MMC SPI on GPIO, here's all the hardware-identifying data. */ -+struct crisv32_mmc_spi_gpio_hwdata { -+ struct crisv32_spi_gpio_controller_data spi; -+ struct crisv32_mmc_spi_pindata mmc; -+}; -+ -+/* Similar for SSER. */ -+struct crisv32_mmc_spi_sser_hwdata { -+ struct crisv32_spi_sser_controller_data spi; -+ struct crisv32_mmc_spi_pindata mmc; -+}; -+ -+#endif /* __ARCH_V32_BOARD_H */ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/bug.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/bug.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/bug.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/bug.h 2006-06-21 10:29:16.000000000 +0200 -@@ -0,0 +1,69 @@ -+#ifndef __ASM_CRIS_ARCH_BUG_H -+#define __ASM_CRIS_ARCH_BUG_H -+ -+#include -+ -+#ifdef CONFIG_BUG -+#ifdef CONFIG_DEBUG_BUGVERBOSE -+/* The BUG() macro is used for marking obviously incorrect code paths. -+ * It will cause a message with the file name and line number to be printed, -+ * and then cause an oops. The message is actually printed by handle_BUG() -+ * in arch/cris/kernel/traps.c, and the reason we use this method of storing -+ * the file name and line number is that we do not want to affect the registers -+ * by calling printk() before causing the oops (this is not entirely true -+ * for CRISv32 since we need to modify the $acr register). -+ */ -+ -+#define BUG_PREFIX 0xFE6F -+#define BUG_MAGIC 0x00001234 -+ -+struct bug_frame { -+ unsigned short prefix; -+ unsigned int magic; -+ unsigned short clear; -+ unsigned short movu; -+ unsigned short line; -+ unsigned short jump; -+ unsigned char* filename; -+}; -+ -+#if 0 -+/* Unfortunately this version of the macro does not work due to a problem -+ * with the compiler (aka a bug) when compiling with -O2, which sometimes -+ * erroneously causes the second input to be stored in a register... -+ */ -+#define BUG() \ -+ __asm__ __volatile__ ("move.d [" __stringify(BUG_MAGIC) "],$acr\n\t"\ -+ "clear.d [$acr]\n\t" \ -+ "movu.w %0,$r0\n\t" \ -+ "jump %1\n\t" \ -+ : : "i" (__LINE__), "i" (__FILE__)) -+#else -+/* This version will have to do for now, until the compiler is fixed. -+ * The drawbacks of this version are that the file name will appear multiple -+ * times in the .rodata section, and that __LINE__ and __FILE__ can probably -+ * not be used like this with newer versions of gcc. -+ */ -+#define BUG() \ -+ __asm__ __volatile__ ("move.d " __stringify(BUG_MAGIC) ",$acr\n\t"\ -+ "clear.d [$acr]\n\t" \ -+ "movu.w " __stringify(__LINE__) ",$r0\n\t"\ -+ "jump 0f\n\t" \ -+ ".section .rodata\n" \ -+ "0:\t.string \"" __FILE__ "\"\n\t" \ -+ ".previous") -+#endif -+ -+#else -+ -+/* This just causes an oops. */ -+#define BUG() (*(int *)0 = 0) -+ -+#endif -+ -+#define HAVE_ARCH_BUG -+#endif -+ -+#include -+ -+#endif -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/cache.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/cache.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/cache.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/cache.h 2007-01-05 09:59:53.000000000 +0100 -@@ -1,8 +1,19 @@ - #ifndef _ASM_CRIS_ARCH_CACHE_H - #define _ASM_CRIS_ARCH_CACHE_H - -+#include -+ - /* A cache-line is 32 bytes. */ - #define L1_CACHE_BYTES 32 - #define L1_CACHE_SHIFT 5 - -+void flush_dma_list(dma_descr_data* descr); -+void flush_dma_descr(dma_descr_data* descr, int flush_buf); -+ -+#define flush_dma_context(c) \ -+ flush_dma_list(phys_to_virt((c)->saved_data)); -+ -+void cris_flush_cache_range(void* buf, unsigned long len); -+void cris_flush_cache(void); -+ - #endif /* _ASM_CRIS_ARCH_CACHE_H */ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/cryptocop.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/cryptocop.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/cryptocop.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/cryptocop.h 2005-04-20 14:33:25.000000000 +0200 -@@ -160,7 +160,7 @@ - cryptocop_source_dma = 0, - cryptocop_source_des, - cryptocop_source_3des, -- cryptocop_source_aes, -+ cryptocop_source_aes, - cryptocop_source_md5, - cryptocop_source_sha1, - cryptocop_source_csum, -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/delay.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/delay.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/delay.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/delay.h 2006-10-11 19:46:19.000000000 +0200 -@@ -1,6 +1,16 @@ - #ifndef _ASM_CRIS_ARCH_DELAY_H - #define _ASM_CRIS_ARCH_DELAY_H - -+extern void cris_delay10ns(u32 n10ns); -+#define udelay(u) cris_delay10ns((u)*100) -+#define ndelay(n) cris_delay10ns(((n)+9)/10) -+ -+/* -+ * Not used anymore for udelay or ndelay. Referenced by -+ * e.g. init/calibrate.c. All other references are likely bugs; -+ * should be replaced by mdelay, udelay or ndelay. -+ */ -+ - static inline void - __delay(int loops) - { -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/dma.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/dma.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/dma.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/dma.h 2005-05-02 12:43:02.000000000 +0200 -@@ -67,7 +67,7 @@ - dma_ext3 - }; - --int crisv32_request_dma(unsigned int dmanr, const char * device_id, -+int crisv32_request_dma(unsigned int dmanr, const char * device_id, - unsigned options, unsigned bandwidth, enum dma_owner owner); - void crisv32_free_dma(unsigned int dmanr); - -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/Makefile linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/Makefile ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/Makefile 2004-01-07 22:16:18.000000000 +0100 -@@ -126,9 +126,9 @@ - - # From /n/asic/projects/guinness/design/ - reg_map.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap -- $(RDES2C) -base 0xb0000000 $^ -+ $(RDES2C) -base 0xb0000000 $^ - reg_map_asm.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap -- $(RDES2C) -base 0xb0000000 -asm -outfile $@ $^ -+ $(RDES2C) -base 0xb0000000 -asm -outfile $@ $^ - - reg_rdwr.h: $(DESIGNDIR)/top/sw/include/reg_rdwr.h - cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ -@@ -171,14 +171,14 @@ - done - - .PHONY: axw --## %.axw - Generate the specified .axw file (doesn't work for all files -+## %.axw - Generate the specified .axw file (doesn't work for all files - ## due to inconsistent naming ir .r files. - %.axw: axw - @for RDES in $(REGDESC); do \ - if echo "$$RDES" | grep $* ; then \ - $(RDES2TXT) $$RDES; \ - fi \ -- done -+ done - - .PHONY: clean - ## clean - Remove .h files and .axw files. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/ata/rtl/ata_regs.r -- * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp -+ * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp - * last modfied: Mon Apr 11 16:06:25 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ata_defs_asm.h ../../inst/ata/rtl/ata_regs.r - * id: $Id: ata_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_core_regs.r -- * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp -+ * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp - * last modfied: Mon Apr 11 16:06:33 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_core_defs_asm.h ../../inst/bif/rtl/bif_core_regs.r - * id: $Id: bif_core_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_dma_regs.r -- * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp -+ * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp - * last modfied: Mon Apr 11 16:06:33 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_dma_defs_asm.h ../../inst/bif/rtl/bif_dma_regs.r - * id: $Id: bif_dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_slave_regs.r -- * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp -+ * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp - * last modfied: Mon Apr 11 16:06:34 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_slave_defs_asm.h ../../inst/bif/rtl/bif_slave_regs.r - * id: $Id: bif_slave_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../rtl/config_regs.r -- * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp -+ * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp - * last modfied: Thu Mar 4 12:34:39 2004 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/config_defs_asm.h ../../rtl/config_regs.r - * id: $Id: config_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h 2005-04-24 20:31:04.000000000 +0200 -@@ -3,7 +3,7 @@ - version . */ - - #ifndef _______INST_CRISP_DOC_CPU_VECT_R --#define _______INST_CRISP_DOC_CPU_VECT_R -+#define _______INST_CRISP_DOC_CPU_VECT_R - #define NMI_INTR_VECT 0x00 - #define RESERVED_1_INTR_VECT 0x01 - #define RESERVED_2_INTR_VECT 0x02 -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/crisp/doc/cris.r -- * id: cris.r,v 1.6 2004/05/05 07:41:12 perz Exp -+ * id: cris.r,v 1.6 2004/05/05 07:41:12 perz Exp - * last modfied: Mon Apr 11 16:06:39 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/cris_defs_asm.h ../../inst/crisp/doc/cris.r - * id: $Id: cris_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/dma/inst/dma_common/rtl/dma_regdes.r -- * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp -+ * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp - * last modfied: Mon Apr 11 16:06:51 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/dma_defs_asm.h ../../inst/dma/inst/dma_common/rtl/dma_regdes.r - * id: $Id: dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/eth/rtl/eth_regs.r -- * id: eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp -+ * id: eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp - * last modfied: Mon Apr 11 16:07:03 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/eth_defs_asm.h ../../inst/eth/rtl/eth_regs.r - * id: $Id: eth_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/gio/rtl/gio_regs.r -- * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp -+ * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp - * last modfied: Mon Apr 11 16:07:47 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/gio_defs_asm.h ../../inst/gio/rtl/gio_regs.r - * id: $Id: gio_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h 2005-04-24 20:31:04.000000000 +0200 -@@ -3,7 +3,7 @@ - version . */ - - #ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R --#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R -+#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R - #define MEMARB_INTR_VECT 0x31 - #define GEN_IO_INTR_VECT 0x32 - #define IOP0_INTR_VECT 0x33 -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/intr_vect/rtl/guinness/ivmask.config.r -- * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp -+ * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp - * last modfied: Mon Apr 11 16:08:03 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/intr_vect_defs_asm.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r - * id: $Id: intr_vect_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../mod/irq_nmi.r - * id: - * last modfied: Thu Jan 22 09:22:43 2004 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/irq_nmi_defs_asm.h ../../mod/irq_nmi.r - * id: $Id: irq_nmi_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -@@ -313,7 +313,7 @@ - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/mmu/doc/mmu_regs.r -- * id: mmu_regs.r,v 1.12 2004/05/06 13:48:45 mikaeln Exp -+ * id: mmu_regs.r,v 1.12 2004/05/06 13:48:45 mikaeln Exp - * last modfied: Mon Apr 11 17:03:20 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/mmu_defs_asm.h ../../inst/mmu/doc/mmu_regs.r - * id: $Id: mmu_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r -- * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp -+ * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp - * last modfied: Mon Apr 11 16:09:11 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/pinmux_defs_asm.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: $Id: pinmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,17 +4,17 @@ - /* - * This file is autogenerated from - * file: ../../mod/fakereg.rmap -- * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp -+ * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp - * last modified: Wed Feb 11 20:53:25 2004 - * file: ../../rtl/global.rmap -- * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp -+ * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp - * last modified: Mon Aug 18 17:08:23 2003 - * file: ../../mod/modreg.rmap -- * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp -+ * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp - * last modified: Fri Feb 20 16:40:04 2004 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/reg_map_asm.h -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap -- * id: $Id: reg_map_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ -+ * id: $Id: reg_map_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/rt_trace/rtl/rt_regs.r -- * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp -+ * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp - * last modfied: Mon Apr 11 16:09:14 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/rt_trace_defs_asm.h ../../inst/rt_trace/rtl/rt_regs.r - * id: $Id: rt_trace_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/ser/rtl/ser_regs.r -- * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp -+ * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp - * last modfied: Mon Apr 11 16:09:21 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ser_defs_asm.h ../../inst/ser/rtl/ser_regs.r - * id: $Id: ser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/syncser/rtl/sser_regs.r -- * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp -+ * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp - * last modfied: Mon Apr 11 16:09:48 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/sser_defs_asm.h ../../inst/syncser/rtl/sser_regs.r - * id: $Id: sser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/strcop/rtl/strcop_regs.r -- * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp -+ * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp - * last modfied: Mon Apr 11 16:09:38 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strcop_defs_asm.h ../../inst/strcop/rtl/strcop_regs.r - * id: $Id: strcop_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/strmux/rtl/guinness/strmux_regs.r -- * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp -+ * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp - * last modfied: Mon Apr 11 16:09:43 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strmux_defs_asm.h ../../inst/strmux/rtl/guinness/strmux_regs.r - * id: $Id: strmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/timer/rtl/timer_regs.r -- * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp -+ * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp - * last modfied: Mon Apr 11 16:09:53 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/timer_defs_asm.h ../../inst/timer/rtl/timer_regs.r - * id: $Id: timer_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/ata_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/ata_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/ata_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/ata_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/ata/rtl/ata_regs.r -- * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp -+ * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp - * last modfied: Mon Apr 11 16:06:25 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile ata_defs.h ../../inst/ata/rtl/ata_regs.r - * id: $Id: ata_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_core_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_core_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_core_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_core_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_core_regs.r -- * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp -+ * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp - * last modfied: Mon Apr 11 16:06:33 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_core_defs.h ../../inst/bif/rtl/bif_core_regs.r - * id: $Id: bif_core_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_dma_regs.r -- * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp -+ * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp - * last modfied: Mon Apr 11 16:06:33 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_dma_defs.h ../../inst/bif/rtl/bif_dma_regs.r - * id: $Id: bif_dma_defs.h,v 1.2 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/bif/rtl/bif_slave_regs.r -- * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp -+ * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp - * last modfied: Mon Apr 11 16:06:34 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_slave_defs.h ../../inst/bif/rtl/bif_slave_regs.r - * id: $Id: bif_slave_defs.h,v 1.2 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/config_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/config_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/config_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/config_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../rtl/config_regs.r -- * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp -+ * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp - * last modfied: Thu Mar 4 12:34:39 2004 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile config_defs.h ../../rtl/config_regs.r - * id: $Id: config_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/cpu_vect.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/cpu_vect.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/cpu_vect.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/cpu_vect.h 2005-04-24 20:30:58.000000000 +0200 -@@ -3,7 +3,7 @@ - version . */ - - #ifndef _______INST_CRISP_DOC_CPU_VECT_R --#define _______INST_CRISP_DOC_CPU_VECT_R -+#define _______INST_CRISP_DOC_CPU_VECT_R - #define NMI_INTR_VECT 0x00 - #define RESERVED_1_INTR_VECT 0x01 - #define RESERVED_2_INTR_VECT 0x02 -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/dma.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/dma.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/dma.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/dma.h 2006-06-25 17:01:59.000000000 +0200 -@@ -1,6 +1,6 @@ --/* $Id: dma.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ -+/* $Id: dma.h,v 1.8 2006/06/25 15:01:59 starvik Exp $ - * -- * DMA C definitions and help macros -+ * DMA C definitions and help macros - * - */ - -@@ -98,10 +98,10 @@ - - // give stream command - #define DMA_WR_CMD( inst, cmd_par ) \ -- do { reg_dma_rw_stream_cmd r = {0}; \ -- do { r = REG_RD( dma, inst, rw_stream_cmd ); } while( r.busy ); \ -- r.cmd = (cmd_par); \ -- REG_WR( dma, inst, rw_stream_cmd, r ); \ -+ do { reg_dma_rw_stream_cmd __x = {0}; \ -+ do { __x = REG_RD( dma, inst, rw_stream_cmd ); } while( __x.busy ); \ -+ __x.cmd = (cmd_par); \ -+ REG_WR( dma, inst, rw_stream_cmd, __x ); \ - } while( 0 ) - - // load: g,c,d:burst -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/dma_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/dma_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/dma_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/dma_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/dma/inst/dma_common/rtl/dma_regdes.r -- * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp -+ * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp - * last modfied: Mon Apr 11 16:06:51 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile dma_defs.h ../../inst/dma/inst/dma_common/rtl/dma_regdes.r - * id: $Id: dma_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/eth_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/eth_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/eth_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/eth_defs.h 2006-01-26 14:45:30.000000000 +0100 -@@ -3,12 +3,12 @@ - - /* - * This file is autogenerated from -- * file: ../../inst/eth/rtl/eth_regs.r -- * id: eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp -- * last modfied: Mon Apr 11 16:07:03 2005 -- * -- * by /n/asic/design/tools/rdesc/src/rdes2c --outfile eth_defs.h ../../inst/eth/rtl/eth_regs.r -- * id: $Id: eth_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ -+ * file: eth.r -+ * id: eth_regs.r,v 1.16 2005/05/20 15:41:22 perz Exp -+ * last modfied: Mon Jan 9 06:06:41 2006 -+ * -+ * by /n/asic/design/tools/rdesc/rdes2c eth.r -+ * id: $Id: eth_defs.h,v 1.7 2006/01/26 13:45:30 karljope Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- -@@ -116,26 +116,28 @@ - - /* Register rw_ga_lo, scope eth, type rw */ - typedef struct { -- unsigned int table : 32; -+ unsigned int tbl : 32; - } reg_eth_rw_ga_lo; - #define REG_RD_ADDR_eth_rw_ga_lo 16 - #define REG_WR_ADDR_eth_rw_ga_lo 16 - - /* Register rw_ga_hi, scope eth, type rw */ - typedef struct { -- unsigned int table : 32; -+ unsigned int tbl : 32; - } reg_eth_rw_ga_hi; - #define REG_RD_ADDR_eth_rw_ga_hi 20 - #define REG_WR_ADDR_eth_rw_ga_hi 20 - - /* Register rw_gen_ctrl, scope eth, type rw */ - typedef struct { -- unsigned int en : 1; -- unsigned int phy : 2; -- unsigned int protocol : 1; -- unsigned int loopback : 1; -- unsigned int flow_ctrl_dis : 1; -- unsigned int dummy1 : 26; -+ unsigned int en : 1; -+ unsigned int phy : 2; -+ unsigned int protocol : 1; -+ unsigned int loopback : 1; -+ unsigned int flow_ctrl : 1; -+ unsigned int gtxclk_out : 1; -+ unsigned int phyrst_n : 1; -+ unsigned int dummy1 : 24; - } reg_eth_rw_gen_ctrl; - #define REG_RD_ADDR_eth_rw_gen_ctrl 24 - #define REG_WR_ADDR_eth_rw_gen_ctrl 24 -@@ -150,22 +152,23 @@ - unsigned int oversize : 1; - unsigned int bad_crc : 1; - unsigned int duplex : 1; -- unsigned int max_size : 1; -- unsigned int dummy1 : 23; -+ unsigned int max_size : 16; -+ unsigned int dummy1 : 8; - } reg_eth_rw_rec_ctrl; - #define REG_RD_ADDR_eth_rw_rec_ctrl 28 - #define REG_WR_ADDR_eth_rw_rec_ctrl 28 - - /* Register rw_tr_ctrl, scope eth, type rw */ - typedef struct { -- unsigned int crc : 1; -- unsigned int pad : 1; -- unsigned int retry : 1; -- unsigned int ignore_col : 1; -- unsigned int cancel : 1; -- unsigned int hsh_delay : 1; -- unsigned int ignore_crs : 1; -- unsigned int dummy1 : 25; -+ unsigned int crc : 1; -+ unsigned int pad : 1; -+ unsigned int retry : 1; -+ unsigned int ignore_col : 1; -+ unsigned int cancel : 1; -+ unsigned int hsh_delay : 1; -+ unsigned int ignore_crs : 1; -+ unsigned int carrier_ext : 1; -+ unsigned int dummy1 : 24; - } reg_eth_rw_tr_ctrl; - #define REG_RD_ADDR_eth_rw_tr_ctrl 32 - #define REG_WR_ADDR_eth_rw_tr_ctrl 32 -@@ -180,13 +183,10 @@ - - /* Register rw_mgm_ctrl, scope eth, type rw */ - typedef struct { -- unsigned int mdio : 1; -- unsigned int mdoe : 1; -- unsigned int mdc : 1; -- unsigned int phyclk : 1; -- unsigned int txdata : 4; -- unsigned int txen : 1; -- unsigned int dummy1 : 23; -+ unsigned int mdio : 1; -+ unsigned int mdoe : 1; -+ unsigned int mdc : 1; -+ unsigned int dummy1 : 29; - } reg_eth_rw_mgm_ctrl; - #define REG_RD_ADDR_eth_rw_mgm_ctrl 40 - #define REG_WR_ADDR_eth_rw_mgm_ctrl 40 -@@ -196,17 +196,8 @@ - unsigned int mdio : 1; - unsigned int exc_col : 1; - unsigned int urun : 1; -- unsigned int phyclk : 1; -- unsigned int txdata : 4; -- unsigned int txen : 1; -- unsigned int col : 1; -- unsigned int crs : 1; -- unsigned int txclk : 1; -- unsigned int rxdata : 4; -- unsigned int rxer : 1; -- unsigned int rxdv : 1; -- unsigned int rxclk : 1; -- unsigned int dummy1 : 13; -+ unsigned int clk_125 : 1; -+ unsigned int dummy1 : 28; - } reg_eth_r_stat; - #define REG_RD_ADDR_eth_r_stat 44 - -@@ -274,83 +265,83 @@ - - /* Register rw_intr_mask, scope eth, type rw */ - typedef struct { -- unsigned int crc : 1; -- unsigned int align : 1; -- unsigned int oversize : 1; -- unsigned int congestion : 1; -- unsigned int single_col : 1; -- unsigned int mult_col : 1; -- unsigned int late_col : 1; -- unsigned int deferred : 1; -- unsigned int carrier_loss : 1; -- unsigned int sqe_test_err : 1; -- unsigned int orun : 1; -- unsigned int urun : 1; -- unsigned int excessive_col : 1; -- unsigned int mdio : 1; -- unsigned int dummy1 : 18; -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; - } reg_eth_rw_intr_mask; - #define REG_RD_ADDR_eth_rw_intr_mask 76 - #define REG_WR_ADDR_eth_rw_intr_mask 76 - - /* Register rw_ack_intr, scope eth, type rw */ - typedef struct { -- unsigned int crc : 1; -- unsigned int align : 1; -- unsigned int oversize : 1; -- unsigned int congestion : 1; -- unsigned int single_col : 1; -- unsigned int mult_col : 1; -- unsigned int late_col : 1; -- unsigned int deferred : 1; -- unsigned int carrier_loss : 1; -- unsigned int sqe_test_err : 1; -- unsigned int orun : 1; -- unsigned int urun : 1; -- unsigned int excessive_col : 1; -- unsigned int mdio : 1; -- unsigned int dummy1 : 18; -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; - } reg_eth_rw_ack_intr; - #define REG_RD_ADDR_eth_rw_ack_intr 80 - #define REG_WR_ADDR_eth_rw_ack_intr 80 - - /* Register r_intr, scope eth, type r */ - typedef struct { -- unsigned int crc : 1; -- unsigned int align : 1; -- unsigned int oversize : 1; -- unsigned int congestion : 1; -- unsigned int single_col : 1; -- unsigned int mult_col : 1; -- unsigned int late_col : 1; -- unsigned int deferred : 1; -- unsigned int carrier_loss : 1; -- unsigned int sqe_test_err : 1; -- unsigned int orun : 1; -- unsigned int urun : 1; -- unsigned int excessive_col : 1; -- unsigned int mdio : 1; -- unsigned int dummy1 : 18; -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; - } reg_eth_r_intr; - #define REG_RD_ADDR_eth_r_intr 84 - - /* Register r_masked_intr, scope eth, type r */ - typedef struct { -- unsigned int crc : 1; -- unsigned int align : 1; -- unsigned int oversize : 1; -- unsigned int congestion : 1; -- unsigned int single_col : 1; -- unsigned int mult_col : 1; -- unsigned int late_col : 1; -- unsigned int deferred : 1; -- unsigned int carrier_loss : 1; -- unsigned int sqe_test_err : 1; -- unsigned int orun : 1; -- unsigned int urun : 1; -- unsigned int excessive_col : 1; -- unsigned int mdio : 1; -- unsigned int dummy1 : 18; -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; - } reg_eth_r_masked_intr; - #define REG_RD_ADDR_eth_r_masked_intr 88 - -@@ -360,12 +351,15 @@ - regk_eth_discard = 0x00000000, - regk_eth_ether = 0x00000000, - regk_eth_full = 0x00000001, -+ regk_eth_gmii = 0x00000003, -+ regk_eth_gtxclk = 0x00000001, - regk_eth_half = 0x00000000, - regk_eth_hsh = 0x00000001, - regk_eth_mii = 0x00000001, -+ regk_eth_mii_arec = 0x00000002, - regk_eth_mii_clk = 0x00000000, -- regk_eth_mii_rec = 0x00000002, - regk_eth_no = 0x00000000, -+ regk_eth_phyrst = 0x00000000, - regk_eth_rec = 0x00000001, - regk_eth_rw_ga_hi_default = 0x00000000, - regk_eth_rw_ga_lo_default = 0x00000000, -@@ -377,8 +371,8 @@ - regk_eth_rw_ma1_lo_default = 0x00000000, - regk_eth_rw_mgm_ctrl_default = 0x00000000, - regk_eth_rw_test_ctrl_default = 0x00000000, -- regk_eth_size1518 = 0x00000000, -- regk_eth_size1522 = 0x00000001, -+ regk_eth_size1518 = 0x000005ee, -+ regk_eth_size1522 = 0x000005f2, - regk_eth_yes = 0x00000001 - }; - #endif /* __eth_defs_h */ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/eth_defs_fs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/eth_defs_fs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/eth_defs_fs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/eth_defs_fs.h 2007-02-07 10:36:10.000000000 +0100 -@@ -0,0 +1,384 @@ -+#ifndef __eth_defs_h -+#define __eth_defs_h -+ -+/* -+ * This file is autogenerated from -+ * file: eth_regs.r -+ * id: eth_regs.r,v 1.17 2006/02/08 16:47:19 perz Exp perz -+ * last modfied: Tue Feb 6 13:57:16 2007 -+ * -+ * by /n/asic/design/io/eth/inst/rdesc/rdes2c eth_regs.r -+ * id: $Id: eth_defs_fs.h,v 1.1 2007/02/07 09:36:10 karljope Exp $ -+ * Any changes here will be lost. -+ * -+ * -*- buffer-read-only: t -*- -+ */ -+/* Main access macros */ -+#ifndef REG_RD -+#define REG_RD( scope, inst, reg ) \ -+ REG_READ( reg_##scope##_##reg, \ -+ (inst) + REG_RD_ADDR_##scope##_##reg ) -+#endif -+ -+#ifndef REG_WR -+#define REG_WR( scope, inst, reg, val ) \ -+ REG_WRITE( reg_##scope##_##reg, \ -+ (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -+#endif -+ -+#ifndef REG_RD_VECT -+#define REG_RD_VECT( scope, inst, reg, index ) \ -+ REG_READ( reg_##scope##_##reg, \ -+ (inst) + REG_RD_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg ) -+#endif -+ -+#ifndef REG_WR_VECT -+#define REG_WR_VECT( scope, inst, reg, index, val ) \ -+ REG_WRITE( reg_##scope##_##reg, \ -+ (inst) + REG_WR_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg, (val) ) -+#endif -+ -+#ifndef REG_RD_INT -+#define REG_RD_INT( scope, inst, reg ) \ -+ REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -+#endif -+ -+#ifndef REG_WR_INT -+#define REG_WR_INT( scope, inst, reg, val ) \ -+ REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -+#endif -+ -+#ifndef REG_RD_INT_VECT -+#define REG_RD_INT_VECT( scope, inst, reg, index ) \ -+ REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg ) -+#endif -+ -+#ifndef REG_WR_INT_VECT -+#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ -+ REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg, (val) ) -+#endif -+ -+#ifndef REG_TYPE_CONV -+#define REG_TYPE_CONV( type, orgtype, val ) \ -+ ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -+#endif -+ -+#ifndef reg_page_size -+#define reg_page_size 8192 -+#endif -+ -+#ifndef REG_ADDR -+#define REG_ADDR( scope, inst, reg ) \ -+ ( (inst) + REG_RD_ADDR_##scope##_##reg ) -+#endif -+ -+#ifndef REG_ADDR_VECT -+#define REG_ADDR_VECT( scope, inst, reg, index ) \ -+ ( (inst) + REG_RD_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg ) -+#endif -+ -+/* C-code for register scope eth */ -+ -+/* Register rw_ma0_lo, scope eth, type rw */ -+typedef struct { -+ unsigned int addr : 32; -+} reg_eth_rw_ma0_lo; -+#define REG_RD_ADDR_eth_rw_ma0_lo 0 -+#define REG_WR_ADDR_eth_rw_ma0_lo 0 -+ -+/* Register rw_ma0_hi, scope eth, type rw */ -+typedef struct { -+ unsigned int addr : 16; -+ unsigned int dummy1 : 16; -+} reg_eth_rw_ma0_hi; -+#define REG_RD_ADDR_eth_rw_ma0_hi 4 -+#define REG_WR_ADDR_eth_rw_ma0_hi 4 -+ -+/* Register rw_ma1_lo, scope eth, type rw */ -+typedef struct { -+ unsigned int addr : 32; -+} reg_eth_rw_ma1_lo; -+#define REG_RD_ADDR_eth_rw_ma1_lo 8 -+#define REG_WR_ADDR_eth_rw_ma1_lo 8 -+ -+/* Register rw_ma1_hi, scope eth, type rw */ -+typedef struct { -+ unsigned int addr : 16; -+ unsigned int dummy1 : 16; -+} reg_eth_rw_ma1_hi; -+#define REG_RD_ADDR_eth_rw_ma1_hi 12 -+#define REG_WR_ADDR_eth_rw_ma1_hi 12 -+ -+/* Register rw_ga_lo, scope eth, type rw */ -+typedef struct { -+ unsigned int table : 32; -+} reg_eth_rw_ga_lo; -+#define REG_RD_ADDR_eth_rw_ga_lo 16 -+#define REG_WR_ADDR_eth_rw_ga_lo 16 -+ -+/* Register rw_ga_hi, scope eth, type rw */ -+typedef struct { -+ unsigned int table : 32; -+} reg_eth_rw_ga_hi; -+#define REG_RD_ADDR_eth_rw_ga_hi 20 -+#define REG_WR_ADDR_eth_rw_ga_hi 20 -+ -+/* Register rw_gen_ctrl, scope eth, type rw */ -+typedef struct { -+ unsigned int en : 1; -+ unsigned int phy : 2; -+ unsigned int protocol : 1; -+ unsigned int loopback : 1; -+ unsigned int flow_ctrl : 1; -+ unsigned int dummy1 : 26; -+} reg_eth_rw_gen_ctrl; -+#define REG_RD_ADDR_eth_rw_gen_ctrl 24 -+#define REG_WR_ADDR_eth_rw_gen_ctrl 24 -+ -+/* Register rw_rec_ctrl, scope eth, type rw */ -+typedef struct { -+ unsigned int ma0 : 1; -+ unsigned int ma1 : 1; -+ unsigned int individual : 1; -+ unsigned int broadcast : 1; -+ unsigned int undersize : 1; -+ unsigned int oversize : 1; -+ unsigned int bad_crc : 1; -+ unsigned int duplex : 1; -+ unsigned int max_size : 1; -+ unsigned int dummy1 : 23; -+} reg_eth_rw_rec_ctrl; -+#define REG_RD_ADDR_eth_rw_rec_ctrl 28 -+#define REG_WR_ADDR_eth_rw_rec_ctrl 28 -+ -+/* Register rw_tr_ctrl, scope eth, type rw */ -+typedef struct { -+ unsigned int crc : 1; -+ unsigned int pad : 1; -+ unsigned int retry : 1; -+ unsigned int ignore_col : 1; -+ unsigned int cancel : 1; -+ unsigned int hsh_delay : 1; -+ unsigned int ignore_crs : 1; -+ unsigned int dummy1 : 25; -+} reg_eth_rw_tr_ctrl; -+#define REG_RD_ADDR_eth_rw_tr_ctrl 32 -+#define REG_WR_ADDR_eth_rw_tr_ctrl 32 -+ -+/* Register rw_clr_err, scope eth, type rw */ -+typedef struct { -+ unsigned int clr : 1; -+ unsigned int dummy1 : 31; -+} reg_eth_rw_clr_err; -+#define REG_RD_ADDR_eth_rw_clr_err 36 -+#define REG_WR_ADDR_eth_rw_clr_err 36 -+ -+/* Register rw_mgm_ctrl, scope eth, type rw */ -+typedef struct { -+ unsigned int mdio : 1; -+ unsigned int mdoe : 1; -+ unsigned int mdc : 1; -+ unsigned int phyclk : 1; -+ unsigned int txdata : 4; -+ unsigned int txen : 1; -+ unsigned int dummy1 : 23; -+} reg_eth_rw_mgm_ctrl; -+#define REG_RD_ADDR_eth_rw_mgm_ctrl 40 -+#define REG_WR_ADDR_eth_rw_mgm_ctrl 40 -+ -+/* Register r_stat, scope eth, type r */ -+typedef struct { -+ unsigned int mdio : 1; -+ unsigned int exc_col : 1; -+ unsigned int urun : 1; -+ unsigned int phyclk : 1; -+ unsigned int txdata : 4; -+ unsigned int txen : 1; -+ unsigned int col : 1; -+ unsigned int crs : 1; -+ unsigned int txclk : 1; -+ unsigned int rxdata : 4; -+ unsigned int rxer : 1; -+ unsigned int rxdv : 1; -+ unsigned int rxclk : 1; -+ unsigned int dummy1 : 13; -+} reg_eth_r_stat; -+#define REG_RD_ADDR_eth_r_stat 44 -+ -+/* Register rs_rec_cnt, scope eth, type rs */ -+typedef struct { -+ unsigned int crc_err : 8; -+ unsigned int align_err : 8; -+ unsigned int oversize : 8; -+ unsigned int congestion : 8; -+} reg_eth_rs_rec_cnt; -+#define REG_RD_ADDR_eth_rs_rec_cnt 48 -+ -+/* Register r_rec_cnt, scope eth, type r */ -+typedef struct { -+ unsigned int crc_err : 8; -+ unsigned int align_err : 8; -+ unsigned int oversize : 8; -+ unsigned int congestion : 8; -+} reg_eth_r_rec_cnt; -+#define REG_RD_ADDR_eth_r_rec_cnt 52 -+ -+/* Register rs_tr_cnt, scope eth, type rs */ -+typedef struct { -+ unsigned int single_col : 8; -+ unsigned int mult_col : 8; -+ unsigned int late_col : 8; -+ unsigned int deferred : 8; -+} reg_eth_rs_tr_cnt; -+#define REG_RD_ADDR_eth_rs_tr_cnt 56 -+ -+/* Register r_tr_cnt, scope eth, type r */ -+typedef struct { -+ unsigned int single_col : 8; -+ unsigned int mult_col : 8; -+ unsigned int late_col : 8; -+ unsigned int deferred : 8; -+} reg_eth_r_tr_cnt; -+#define REG_RD_ADDR_eth_r_tr_cnt 60 -+ -+/* Register rs_phy_cnt, scope eth, type rs */ -+typedef struct { -+ unsigned int carrier_loss : 8; -+ unsigned int sqe_err : 8; -+ unsigned int dummy1 : 16; -+} reg_eth_rs_phy_cnt; -+#define REG_RD_ADDR_eth_rs_phy_cnt 64 -+ -+/* Register r_phy_cnt, scope eth, type r */ -+typedef struct { -+ unsigned int carrier_loss : 8; -+ unsigned int sqe_err : 8; -+ unsigned int dummy1 : 16; -+} reg_eth_r_phy_cnt; -+#define REG_RD_ADDR_eth_r_phy_cnt 68 -+ -+/* Register rw_test_ctrl, scope eth, type rw */ -+typedef struct { -+ unsigned int snmp_inc : 1; -+ unsigned int snmp : 1; -+ unsigned int backoff : 1; -+ unsigned int dummy1 : 29; -+} reg_eth_rw_test_ctrl; -+#define REG_RD_ADDR_eth_rw_test_ctrl 72 -+#define REG_WR_ADDR_eth_rw_test_ctrl 72 -+ -+/* Register rw_intr_mask, scope eth, type rw */ -+typedef struct { -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; -+} reg_eth_rw_intr_mask; -+#define REG_RD_ADDR_eth_rw_intr_mask 76 -+#define REG_WR_ADDR_eth_rw_intr_mask 76 -+ -+/* Register rw_ack_intr, scope eth, type rw */ -+typedef struct { -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; -+} reg_eth_rw_ack_intr; -+#define REG_RD_ADDR_eth_rw_ack_intr 80 -+#define REG_WR_ADDR_eth_rw_ack_intr 80 -+ -+/* Register r_intr, scope eth, type r */ -+typedef struct { -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; -+} reg_eth_r_intr; -+#define REG_RD_ADDR_eth_r_intr 84 -+ -+/* Register r_masked_intr, scope eth, type r */ -+typedef struct { -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; -+} reg_eth_r_masked_intr; -+#define REG_RD_ADDR_eth_r_masked_intr 88 -+ -+ -+/* Constants */ -+enum { -+ regk_eth_discard = 0x00000000, -+ regk_eth_ether = 0x00000000, -+ regk_eth_full = 0x00000001, -+ regk_eth_half = 0x00000000, -+ regk_eth_hsh = 0x00000001, -+ regk_eth_mii = 0x00000001, -+ regk_eth_mii_arec = 0x00000002, -+ regk_eth_mii_clk = 0x00000000, -+ regk_eth_no = 0x00000000, -+ regk_eth_rec = 0x00000001, -+ regk_eth_rw_ga_hi_default = 0x00000000, -+ regk_eth_rw_ga_lo_default = 0x00000000, -+ regk_eth_rw_gen_ctrl_default = 0x00000000, -+ regk_eth_rw_intr_mask_default = 0x00000000, -+ regk_eth_rw_ma0_hi_default = 0x00000000, -+ regk_eth_rw_ma0_lo_default = 0x00000000, -+ regk_eth_rw_ma1_hi_default = 0x00000000, -+ regk_eth_rw_ma1_lo_default = 0x00000000, -+ regk_eth_rw_mgm_ctrl_default = 0x00000000, -+ regk_eth_rw_test_ctrl_default = 0x00000000, -+ regk_eth_size1518 = 0x00000000, -+ regk_eth_size1522 = 0x00000001, -+ regk_eth_yes = 0x00000001 -+}; -+#endif /* __eth_defs_h */ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/extmem_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/extmem_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/extmem_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/extmem_defs.h 2004-06-04 09:15:33.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/ext_mem/mod/extmem_regs.r -- * id: extmem_regs.r,v 1.1 2004/02/16 13:29:30 np Exp -+ * id: extmem_regs.r,v 1.1 2004/02/16 13:29:30 np Exp - * last modfied: Tue Mar 30 22:26:21 2004 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile extmem_defs.h ../../inst/ext_mem/mod/extmem_regs.r - * id: $Id: extmem_defs.h,v 1.5 2004/06/04 07:15:33 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/gio_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/gio_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/gio_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/gio_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/gio/rtl/gio_regs.r -- * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp -+ * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp - * last modfied: Mon Apr 11 16:07:47 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile gio_defs.h ../../inst/gio/rtl/gio_regs.r - * id: $Id: gio_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/intr_vect.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/intr_vect.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/intr_vect.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/intr_vect.h 2005-05-23 14:59:21.000000000 +0200 -@@ -3,7 +3,7 @@ - version . */ - - #ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R --#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R -+#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R - #define MEMARB_INTR_VECT 0x31 - #define GEN_IO_INTR_VECT 0x32 - #define IOP0_INTR_VECT 0x33 -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/intr_vect/rtl/guinness/ivmask.config.r -- * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp -+ * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp - * last modfied: Mon Apr 11 16:08:03 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile intr_vect_defs.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r - * id: $Id: intr_vect_defs.h,v 1.8 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -@@ -209,7 +209,7 @@ - #define REG_RD_ADDR_intr_vect_r_guru 16 - - /* Register rw_ipi, scope intr_vect, type rw */ --typedef struct -+typedef struct - { - unsigned int vector; - } reg_intr_vect_rw_ipi; -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/Makefile linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/Makefile ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/Makefile 2004-01-07 21:34:55.000000000 +0100 -@@ -125,14 +125,14 @@ - done - - .PHONY: axw --## %.axw - Generate the specified .axw file (doesn't work for all files -+## %.axw - Generate the specified .axw file (doesn't work for all files - ## due to inconsistent naming of .r files. - %.axw: axw - @for RDES in $(IOPROCREGDESC); do \ - if echo "$$RDES" | grep $* ; then \ - $(RDES2TXT) $$RDES; \ - fi \ -- done -+ done - - .PHONY: clean - ## clean - Remove .h files and .axw files. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_crc_par.r - * id: - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_crc_par_defs_asm.h ../../inst/io_proc/rtl/iop_crc_par.r - * id: $Id: iop_crc_par_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_dmc_in.r -- * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp -+ * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_dmc_in_defs_asm.h ../../inst/io_proc/rtl/iop_dmc_in.r - * id: $Id: iop_dmc_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_dmc_out.r -- * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp -+ * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_dmc_out_defs_asm.h ../../inst/io_proc/rtl/iop_dmc_out.r - * id: $Id: iop_dmc_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_fifo_in.r - * id: - * last modfied: Mon Apr 11 16:10:07 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_in_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_in.r - * id: $Id: iop_fifo_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_fifo_in_extra.r - * id: - * last modfied: Mon Apr 11 16:10:08 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_in_extra_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_in_extra.r - * id: $Id: iop_fifo_in_extra_defs_asm.h,v 1.1 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_fifo_out.r - * id: - * last modfied: Mon Apr 11 16:10:09 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_out_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_out.r - * id: $Id: iop_fifo_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_fifo_out_extra.r - * id: - * last modfied: Mon Apr 11 16:10:10 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_out_extra_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_out_extra.r - * id: $Id: iop_fifo_out_extra_defs_asm.h,v 1.1 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_mpu.r -- * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp -+ * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_mpu_defs_asm.h ../../inst/io_proc/rtl/iop_mpu.r - * id: $Id: iop_mpu_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -1,5 +1,5 @@ - /* Autogenerated Changes here will be lost! -- * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg -+ * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg - */ - #define iop_version 0 - #define iop_fifo_in0_extra 64 -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_sap_in.r - * id: - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sap_in_defs_asm.h ../../inst/io_proc/rtl/iop_sap_in.r - * id: $Id: iop_sap_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_sap_out.r - * id: - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sap_out_defs_asm.h ../../inst/io_proc/rtl/iop_sap_out.r - * id: $Id: iop_sap_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_scrc_in.r -- * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp -+ * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_scrc_in_defs_asm.h ../../inst/io_proc/rtl/iop_scrc_in.r - * id: $Id: iop_scrc_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_scrc_out.r -- * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp -+ * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_scrc_out_defs_asm.h ../../inst/io_proc/rtl/iop_scrc_out.r - * id: $Id: iop_scrc_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_spu.r - * id: - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_spu_defs_asm.h ../../inst/io_proc/rtl/iop_spu.r - * id: $Id: iop_spu_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_cfg_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r - * id: $Id: iop_sw_cfg_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_cpu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r - * id: $Id: iop_sw_cpu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_mpu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r - * id: $Id: iop_sw_mpu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/guinness/iop_sw_spu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_spu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_spu.r - * id: $Id: iop_sw_spu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_timer_grp.r -- * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp -+ * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_timer_grp_defs_asm.h ../../inst/io_proc/rtl/iop_timer_grp.r - * id: $Id: iop_timer_grp_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_trigger_grp.r -- * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp -+ * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_trigger_grp_defs_asm.h ../../inst/io_proc/rtl/iop_trigger_grp.r - * id: $Id: iop_trigger_grp_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_version.r -- * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp -+ * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp - * last modfied: Mon Apr 11 16:08:44 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_version_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_version.r - * id: $Id: iop_version_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_crc_par.r - * id: - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_crc_par_defs.h ../../inst/io_proc/rtl/iop_crc_par.r - * id: $Id: iop_crc_par_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_dmc_in.r -- * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp -+ * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_dmc_in_defs.h ../../inst/io_proc/rtl/iop_dmc_in.r - * id: $Id: iop_dmc_in_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_dmc_out.r -- * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp -+ * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_dmc_out_defs.h ../../inst/io_proc/rtl/iop_dmc_out.r - * id: $Id: iop_dmc_out_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_fifo_in.r - * id: - * last modfied: Mon Apr 11 16:10:07 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_in_defs.h ../../inst/io_proc/rtl/iop_fifo_in.r - * id: $Id: iop_fifo_in_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_fifo_in_extra.r - * id: - * last modfied: Mon Apr 11 16:10:08 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_in_extra_defs.h ../../inst/io_proc/rtl/iop_fifo_in_extra.r - * id: $Id: iop_fifo_in_extra_defs.h,v 1.1 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_fifo_out.r - * id: - * last modfied: Mon Apr 11 16:10:09 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_out_defs.h ../../inst/io_proc/rtl/iop_fifo_out.r - * id: $Id: iop_fifo_out_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_fifo_out_extra.r - * id: - * last modfied: Mon Apr 11 16:10:10 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_out_extra_defs.h ../../inst/io_proc/rtl/iop_fifo_out_extra.r - * id: $Id: iop_fifo_out_extra_defs.h,v 1.1 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_mpu.r -- * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp -+ * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_mpu_defs.h ../../inst/io_proc/rtl/iop_mpu.r - * id: $Id: iop_mpu_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h 2004-01-07 16:18:30.000000000 +0100 -@@ -96,189 +96,189 @@ - #define MPU_ADD_RRR(S,N,D) (0x4000008C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADD_RRS(S,N,D) (0x4000048C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADD_RSR(S,N,D) (0x4000018C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADD_RSS(S,N,D) (0x4000058C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADD_SRR(S,N,D) (0x4000028C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADD_SRS(S,N,D) (0x4000068C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADD_SSR(S,N,D) (0x4000038C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADD_SSS(S,N,D) (0x4000078C | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDQ_RIR(S,N,D) (0x10000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDQ_IRR(S,N,D) (0x10000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDX_IRR_INSTR(S,N,D) (0xC000008C | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ADDX_RIR_INSTR(S,N,D) (0xC000008C | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ADDX_ISR_INSTR(S,N,D) (0xC000028C | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ADDX_SIR_INSTR(S,N,D) (0xC000028C | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ADDX_IRS_INSTR(S,N,D) (0xC000048C | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ADDX_RIS_INSTR(S,N,D) (0xC000048C | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ADDX_ISS_INSTR(S,N,D) (0xC000068C | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ADDX_SIS_INSTR(S,N,D) (0xC000068C | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ADDX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_AND_RRR(S,N,D) (0x4000008A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_AND_RRS(S,N,D) (0x4000048A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_AND_RSR(S,N,D) (0x4000018A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_AND_RSS(S,N,D) (0x4000058A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_AND_SRR(S,N,D) (0x4000028A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_AND_SRS(S,N,D) (0x4000068A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_AND_SSR(S,N,D) (0x4000038A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_AND_SSS(S,N,D) (0x4000078A | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDQ_RIR(S,N,D) (0x08000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDQ_IRR(S,N,D) (0x08000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDX_RIR_INSTR(S,N,D) (0xC000008A | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ANDX_IRR_INSTR(S,N,D) (0xC000008A | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ANDX_ISR_INSTR(S,N,D) (0xC000028A | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ANDX_SIR_INSTR(S,N,D) (0xC000028A | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ANDX_IRS_INSTR(S,N,D) (0xC000048A | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ANDX_ISS_INSTR(S,N,D) (0xC000068A | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ANDX_RIS_INSTR(S,N,D) (0xC000048A | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ANDX_SIS_INSTR(S,N,D) (0xC000068A | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ANDX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_BA_I(S) (0x60000000 | ((S & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_BAR_R(S) (0x62000000 | ((S & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_BAR_S(S) (0x63000000 | ((S & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_BBC_RII(S,N,D) (0x78000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 21)\ - | ((D & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_BBS_RII(S,N,D) (0x7C000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 21)\ - | ((D & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_BNZ_RI(S,D) (0x74400000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_BMI_RI(S,D) (0x7FE00000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_BPL_RI(S,D) (0x7BE00000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_BZ_RI(S,D) (0x74000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_DI() (0x40000001) - - #define MPU_EI() (0x40000003) -@@ -286,243 +286,243 @@ - #define MPU_HALT() (0x40000002) - - #define MPU_JIR_I(S) (0x60200000 | ((S & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_JIR_R(S) (0x62200000 | ((S & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_JIR_S(S) (0x63200000 | ((S & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_JNT() (0x61000000) - - #define MPU_JSR_I(S) (0x60400000 | ((S & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_JSR_R(S) (0x62400000 | ((S & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_JSR_S(S) (0x63400000 | ((S & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_LSL_RRR(S,N,D) (0x4000008E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSL_RRS(S,N,D) (0x4000048E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSL_RSR(S,N,D) (0x4000018E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSL_RSS(S,N,D) (0x4000058E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSL_SRR(S,N,D) (0x4000028E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSL_SRS(S,N,D) (0x4000068E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSL_SSR(S,N,D) (0x4000038E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSL_SSS(S,N,D) (0x4000078E | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSLQ_RIR(S,N,D) (0x18000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSR_RRR(S,N,D) (0x4000008F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSR_RRS(S,N,D) (0x4000048F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSR_RSR(S,N,D) (0x4000018F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSR_RSS(S,N,D) (0x4000058F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSR_SRR(S,N,D) (0x4000028F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSR_SRS(S,N,D) (0x4000068F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSR_SSR(S,N,D) (0x4000038F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSR_SSS(S,N,D) (0x4000078F | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LSRQ_RIR(S,N,D) (0x1C000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_LW_IR(S,D) (0x64400000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_LW_IS(S,D) (0x64600000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_LW_RR(S,D) (0x66400000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_LW_RS(S,D) (0x66600000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_LW_SR(S,D) (0x67400000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_LW_SS(S,D) (0x67600000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_LW_RIR(S,N,D) (0x66400000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_LW_RIS(S,N,D) (0x66600000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_LW_SIR(S,N,D) (0x67400000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_LW_SIS(S,N,D) (0x67600000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_MOVE_RR(S,D) (0x40000081 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_MOVE_RS(S,D) (0x40000481 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_MOVE_SR(S,D) (0x40000181 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_MOVE_SS(S,D) (0x40000581 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_MOVEQ_IR(S,D) (0x24000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_MOVEQ_IS(S,D) (0x2C000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_MOVEX_IR_INSTR(S,D) (0xC0000081 | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_MOVEX_IR_IMM(S,D) (S & 0xFFFFFFFF) - - #define MPU_MOVEX_IS_INSTR(S,D) (0xC0000481 | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_MOVEX_IS_IMM(S,D) (S & 0xFFFFFFFF) - - #define MPU_NOP() (0x40000000) - - #define MPU_NOT_RR(S,D) (0x40100081 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_NOT_RS(S,D) (0x40100481 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_NOT_SR(S,D) (0x40100181 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_NOT_SS(S,D) (0x40100581 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_OR_RRR(S,N,D) (0x4000008B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_OR_RRS(S,N,D) (0x4000048B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_OR_RSR(S,N,D) (0x4000018B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_OR_RSS(S,N,D) (0x4000058B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_OR_SRR(S,N,D) (0x4000028B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_OR_SRS(S,N,D) (0x4000068B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_OR_SSR(S,N,D) (0x4000038B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_OR_SSS(S,N,D) (0x4000078B | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORQ_RIR(S,N,D) (0x0C000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORQ_IRR(S,N,D) (0x0C000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORX_RIR_INSTR(S,N,D) (0xC000008B | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ORX_IRR_INSTR(S,N,D) (0xC000008B | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ORX_SIR_INSTR(S,N,D) (0xC000028B | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ORX_ISR_INSTR(S,N,D) (0xC000028B | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ORX_RIS_INSTR(S,N,D) (0xC000048B | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ORX_IRS_INSTR(S,N,D) (0xC000048B | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_ORX_SIS_INSTR(S,N,D) (0xC000068B | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_ORX_ISS_INSTR(S,N,D) (0xC000068B | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_ORX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_RET() (0x63003000) -@@ -531,232 +531,232 @@ - - #define MPU_RR_IR(S,D) (0x50000000 | ((S & ((1 << 11) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_RR_SR(S,D) (0x50008000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_RW_RI(S,D) (0x56000000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 11) - 1)) << 0)) -- -+ - #define MPU_RW_RS(S,D) (0x57000000 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_RWQ_II(S,D) (0x58000000 | ((S & ((1 << 16) - 1)) << 11)\ - | ((D & ((1 << 11) - 1)) << 0)) -- -+ - #define MPU_RWQ_IS(S,D) (0x55000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_RWX_II_INSTR(S,D) (0xD4000000 | ((D & ((1 << 11) - 1)) << 0)) -- -+ - #define MPU_RWX_II_IMM(S,D) (S & 0xFFFFFFFF) - - #define MPU_RWX_IS_INSTR(S,D) (0xD5000000 | ((D & ((1 << 5) - 1)) << 16)) -- -+ - #define MPU_RWX_IS_IMM(S,D) (S & 0xFFFFFFFF) - - #define MPU_SUB_RRR(S,N,D) (0x4000008D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUB_RRS(S,N,D) (0x4000048D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUB_RSR(S,N,D) (0x4000018D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUB_RSS(S,N,D) (0x4000058D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUB_SRR(S,N,D) (0x4000028D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUB_SRS(S,N,D) (0x4000068D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUB_SSR(S,N,D) (0x4000038D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUB_SSS(S,N,D) (0x4000078D | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUBQ_RIR(S,N,D) (0x14000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUBX_RIR_INSTR(S,N,D) (0xC000008D | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUBX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_SUBX_SIR_INSTR(S,N,D) (0xC000028D | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUBX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_SUBX_RIS_INSTR(S,N,D) (0xC000048D | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUBX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_SUBX_SIS_INSTR(S,N,D) (0xC000068D | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_SUBX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_SW_RI(S,D) (0x64000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_SW_SI(S,D) (0x64200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_SW_RR(S,D) (0x66000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SW_SR(S,D) (0x66200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SW_RS(S,D) (0x67000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SW_SS(S,D) (0x67200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SW_RIR(S,N,D) (0x66000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SW_SIR(S,N,D) (0x66200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SW_RIS(S,N,D) (0x67000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SW_SIS(S,N,D) (0x67200000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SWX_II_INSTR(S,D) (0xE4000000 | ((D & ((1 << 16) - 1)) << 0)) -- -+ - #define MPU_SWX_II_IMM(S,D) (S & 0xFFFFFFFF) - - #define MPU_SWX_IR_INSTR(S,D) (0xE6000000 | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SWX_IR_IMM(S,D) (S & 0xFFFFFFFF) - - #define MPU_SWX_IS_INSTR(S,D) (0xE7000000 | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SWX_IS_IMM(S,D) (S & 0xFFFFFFFF) - - #define MPU_SWX_IIR_INSTR(S,N,D) (0xE6000000 | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SWX_IIR_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_SWX_IIS_INSTR(S,N,D) (0xE7000000 | ((N & ((1 << 8) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 11)) -- -+ - #define MPU_SWX_IIS_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_XOR_RRR(S,N,D) (0x40000089 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_RRS(S,N,D) (0x40000489 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_RSR(S,N,D) (0x40000189 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_RSS(S,N,D) (0x40000589 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_SRR(S,N,D) (0x40000289 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_SRS(S,N,D) (0x40000689 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_SSR(S,N,D) (0x40000389 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_SSS(S,N,D) (0x40000789 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_RR(S,D) (0x40000088 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_RS(S,D) (0x40000488 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_SR(S,D) (0x40000188 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XOR_SS(S,D) (0x40000588 | ((S & ((1 << 5) - 1)) << 11)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORQ_RIR(S,N,D) (0x04000000 | ((S & ((1 << 5) - 1)) << 16)\ - | ((N & ((1 << 16) - 1)) << 0)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORQ_IRR(S,N,D) (0x04000000 | ((S & ((1 << 16) - 1)) << 0)\ - | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORX_RIR_INSTR(S,N,D) (0xC0000089 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_XORX_IRR_INSTR(S,N,D) (0xC0000089 | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_XORX_SIR_INSTR(S,N,D) (0xC0000289 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_XORX_ISR_INSTR(S,N,D) (0xC0000289 | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_XORX_RIS_INSTR(S,N,D) (0xC0000489 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_XORX_IRS_INSTR(S,N,D) (0xC0000489 | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) - - #define MPU_XORX_SIS_INSTR(S,N,D) (0xC0000689 | ((S & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) - - #define MPU_XORX_ISS_INSTR(S,N,D) (0xC0000689 | ((N & ((1 << 5) - 1)) << 16)\ - | ((D & ((1 << 5) - 1)) << 21)) -- -+ - #define MPU_XORX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) - - -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h 2005-04-24 20:31:05.000000000 +0200 -@@ -1,5 +1,5 @@ - /* Autogenerated Changes here will be lost! -- * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg -+ * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg - */ - #define regi_iop_version (regi_iop + 0) - #define regi_iop_fifo_in0_extra (regi_iop + 64) -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_sap_in.r - * id: - * last modfied: Mon Apr 11 16:08:45 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sap_in_defs.h ../../inst/io_proc/rtl/iop_sap_in.r - * id: $Id: iop_sap_in_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_sap_out.r - * id: - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sap_out_defs.h ../../inst/io_proc/rtl/iop_sap_out.r - * id: $Id: iop_sap_out_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_scrc_in.r -- * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp -+ * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_scrc_in_defs.h ../../inst/io_proc/rtl/iop_scrc_in.r - * id: $Id: iop_scrc_in_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_scrc_out.r -- * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp -+ * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_scrc_out_defs.h ../../inst/io_proc/rtl/iop_scrc_out.r - * id: $Id: iop_scrc_out_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/iop_spu.r - * id: - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_spu_defs.h ../../inst/io_proc/rtl/iop_spu.r - * id: $Id: iop_spu_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_cfg_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r - * id: $Id: iop_sw_cfg_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_cpu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r - * id: $Id: iop_sw_cpu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_mpu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r - * id: $Id: iop_sw_mpu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/io_proc/rtl/guinness/iop_sw_spu.r - * id: - * last modfied: Mon Apr 11 16:10:19 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_spu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_spu.r - * id: $Id: iop_sw_spu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_timer_grp.r -- * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp -+ * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_timer_grp_defs.h ../../inst/io_proc/rtl/iop_timer_grp.r - * id: $Id: iop_timer_grp_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/iop_trigger_grp.r -- * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp -+ * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp - * last modfied: Mon Apr 11 16:08:46 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_trigger_grp_defs.h ../../inst/io_proc/rtl/iop_trigger_grp.r - * id: $Id: iop_trigger_grp_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h 2005-04-24 20:31:05.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/io_proc/rtl/guinness/iop_version.r -- * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp -+ * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp - * last modfied: Mon Apr 11 16:08:44 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_version_defs.h ../../inst/io_proc/rtl/guinness/iop_version.r - * id: $Id: iop_version_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../mod/irq_nmi.r - * id: - * last modfied: Thu Jan 22 09:22:43 2004 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile irq_nmi_defs.h ../../mod/irq_nmi.r - * id: $Id: irq_nmi_defs.h,v 1.1 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h 2004-06-04 09:15:33.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Fri Nov 7 15:36:04 2003 -- * -+ * - * by /n/asic/projects/guinness/design/top/inst/rdesc/rdes2c ../../rtl/global.rmap ../../mod/modreg.rmap -base 0xb0000000 ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_bp_defs.h,v 1.2 2004/06/04 07:15:33 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/marb_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/marb_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/marb_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/marb_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -6,7 +6,7 @@ - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -@@ -265,7 +265,7 @@ - * file: ../../inst/memarb/rtl/guinness/marb_top.r - * id: - * last modfied: Mon Apr 11 16:12:16 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r - * id: $Id: marb_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/pinmux_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/pinmux_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/pinmux_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/pinmux_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r -- * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp -+ * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp - * last modfied: Mon Apr 11 16:09:11 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile pinmux_defs.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r - * id: $Id: pinmux_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/reg_map.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/reg_map.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/reg_map.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/reg_map.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,17 +4,17 @@ - /* - * This file is autogenerated from - * file: ../../mod/fakereg.rmap -- * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp -+ * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp - * last modified: Wed Feb 11 20:53:25 2004 - * file: ../../rtl/global.rmap -- * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp -+ * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp - * last modified: Mon Aug 18 17:08:23 2003 - * file: ../../mod/modreg.rmap -- * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp -+ * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp - * last modified: Fri Feb 20 16:40:04 2004 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c -map -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/io_proc/rtl/guinness/iop_top.r ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap -- * id: $Id: reg_map.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ -+ * id: $Id: reg_map.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. - * - * -*- buffer-read-only: t -*- -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/rt_trace/rtl/rt_regs.r -- * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp -+ * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp - * last modfied: Mon Apr 11 16:09:14 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile rt_trace_defs.h ../../inst/rt_trace/rtl/rt_regs.r - * id: $Id: rt_trace_defs.h,v 1.1 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/ser_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/ser_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/ser_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/ser_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/ser/rtl/ser_regs.r -- * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp -+ * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp - * last modfied: Mon Apr 11 16:09:21 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile ser_defs.h ../../inst/ser/rtl/ser_regs.r - * id: $Id: ser_defs.h,v 1.10 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/sser_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/sser_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/sser_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/sser_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/syncser/rtl/sser_regs.r -- * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp -+ * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp - * last modfied: Mon Apr 11 16:09:48 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile sser_defs.h ../../inst/syncser/rtl/sser_regs.r - * id: $Id: sser_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strcop.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strcop.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strcop.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strcop.h 2003-10-22 15:27:12.000000000 +0200 -@@ -54,4 +54,4 @@ - hash_iv = 1 - }; - -- -+ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strcop_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strcop_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strcop_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strcop_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/strcop/rtl/strcop_regs.r -- * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp -+ * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp - * last modfied: Mon Apr 11 16:09:38 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strcop_defs.h ../../inst/strcop/rtl/strcop_regs.r - * id: $Id: strcop_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strmux_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strmux_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strmux_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strmux_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/strmux/rtl/guinness/strmux_regs.r -- * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp -+ * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp - * last modfied: Mon Apr 11 16:09:43 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strmux_defs.h ../../inst/strmux/rtl/guinness/strmux_regs.r - * id: $Id: strmux_defs.h,v 1.5 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/supp_reg.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/supp_reg.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/supp_reg.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/supp_reg.h 2004-12-17 11:23:03.000000000 +0100 -@@ -37,7 +37,7 @@ - #define RW_MM_TLB_HI 6 - #define RW_MM_TLB_PGD 7 - --#define BANK_GC 0 -+#define BANK_GC 0 - #define BANK_IM 1 - #define BANK_DM 2 - #define BANK_BP 3 -@@ -63,7 +63,7 @@ - SPEC_REG_WR(SPEC_REG_SRS,b); \ - NOP(); \ - NOP(); \ -- NOP(); -+ NOP(); - - #define SUPP_REG_WR(r,v) \ - __asm__ __volatile__ ("move %0, $S" STRINGIFYFY(r) "\n\t" \ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/timer_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/timer_defs.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/timer_defs.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/timer_defs.h 2005-04-24 20:30:58.000000000 +0200 -@@ -4,9 +4,9 @@ - /* - * This file is autogenerated from - * file: ../../inst/timer/rtl/timer_regs.r -- * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp -+ * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp - * last modfied: Mon Apr 11 16:09:53 2005 -- * -+ * - * by /n/asic/design/tools/rdesc/src/rdes2c --outfile timer_defs.h ../../inst/timer/rtl/timer_regs.r - * id: $Id: timer_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ - * Any changes here will be lost. -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/ide.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/ide.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/ide.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/ide.h 2005-08-23 11:44:37.000000000 +0200 -@@ -33,7 +33,7 @@ - * together in a hwgroup, and will serialize accesses. this is good, because - * we can't access more than one interface at the same time on ETRAX100. - */ -- return ATA_INTR_VECT; -+ return ATA_INTR_VECT; - } - - static inline unsigned long ide_default_io_base(int index) -@@ -44,7 +44,7 @@ - * so we can use the io_base to remember that bitfield. - */ - ctrl2.sel = index; -- -+ - return REG_TYPE_CONV(unsigned long, reg_ata_rw_ctrl2, ctrl2); - } - -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/io.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/io.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/io.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/io.h 2006-12-06 14:17:02.000000000 +0100 -@@ -1,6 +1,7 @@ - #ifndef _ASM_ARCH_CRIS_IO_H - #define _ASM_ARCH_CRIS_IO_H - -+#include - #include - #include - #include -@@ -13,10 +14,11 @@ - - struct crisv32_ioport - { -- unsigned long* oe; -- unsigned long* data; -- unsigned long* data_in; -+ volatile unsigned long* oe; -+ volatile unsigned long* data; -+ volatile unsigned long* data_in; - unsigned int pin_count; -+ spinlock_t lock; - }; - - struct crisv32_iopin -@@ -34,22 +36,37 @@ - extern struct crisv32_iopin crisv32_led3_green; - extern struct crisv32_iopin crisv32_led3_red; - -+extern struct crisv32_iopin crisv32_led_net0_green; -+extern struct crisv32_iopin crisv32_led_net0_red; -+extern struct crisv32_iopin crisv32_led_net1_green; -+extern struct crisv32_iopin crisv32_led_net1_red; -+ - static inline void crisv32_io_set(struct crisv32_iopin* iopin, - int val) - { -+ long flags; -+ spin_lock_irqsave(&iopin->port->lock, flags); -+ - if (val) - *iopin->port->data |= iopin->bit; - else - *iopin->port->data &= ~iopin->bit; -+ -+ spin_unlock_irqrestore(&iopin->port->lock, flags); - } - - static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin, - enum crisv32_io_dir dir) - { -+ long flags; -+ spin_lock_irqsave(&iopin->port->lock, flags); -+ - if (dir == crisv32_io_dir_in) - *iopin->port->oe &= ~iopin->bit; - else - *iopin->port->oe |= iopin->bit; -+ -+ spin_unlock_irqrestore(&iopin->port->lock, flags); - } - - static inline int crisv32_io_rd(struct crisv32_iopin* iopin) -@@ -60,28 +77,51 @@ - int crisv32_io_get(struct crisv32_iopin* iopin, - unsigned int port, unsigned int pin); - int crisv32_io_get_name(struct crisv32_iopin* iopin, -- char* name); -+ const char* name); - - #define LED_OFF 0x00 - #define LED_GREEN 0x01 - #define LED_RED 0x02 - #define LED_ORANGE (LED_GREEN | LED_RED) - --#define LED_NETWORK_SET(x) \ -- do { \ -- LED_NETWORK_SET_G((x) & LED_GREEN); \ -- LED_NETWORK_SET_R((x) & LED_RED); \ -+#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) -+#define LED_NETWORK_GRP0_SET(x) \ -+ do { \ -+ LED_NETWORK_GRP0_SET_G((x) & LED_GREEN); \ -+ LED_NETWORK_GRP0_SET_R((x) & LED_RED); \ - } while (0) -+#else -+#define LED_NETWORK_GRP0_SET(x) while (0) {} -+#endif -+ -+#define LED_NETWORK_GRP0_SET_G(x) \ -+ crisv32_io_set(&crisv32_led_net0_green, !(x)); -+ -+#define LED_NETWORK_GRP0_SET_R(x) \ -+ crisv32_io_set(&crisv32_led_net0_red, !(x)); -+ -+#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO) -+#define LED_NETWORK_GRP1_SET(x) \ -+ do { \ -+ LED_NETWORK_GRP1_SET_G((x) & LED_GREEN); \ -+ LED_NETWORK_GRP1_SET_R((x) & LED_RED); \ -+ } while (0) -+#else -+#define LED_NETWORK_GRP1_SET(x) while (0) {} -+#endif -+ -+#define LED_NETWORK_GRP1_SET_G(x) \ -+ crisv32_io_set(&crisv32_led_net1_green, !(x)); -+ -+#define LED_NETWORK_GRP1_SET_R(x) \ -+ crisv32_io_set(&crisv32_led_net1_red, !(x)); -+ - #define LED_ACTIVE_SET(x) \ - do { \ - LED_ACTIVE_SET_G((x) & LED_GREEN); \ - LED_ACTIVE_SET_R((x) & LED_RED); \ - } while (0) - --#define LED_NETWORK_SET_G(x) \ -- crisv32_io_set(&crisv32_led1_green, !(x)); --#define LED_NETWORK_SET_R(x) \ -- crisv32_io_set(&crisv32_led1_red, !(x)); - #define LED_ACTIVE_SET_G(x) \ - crisv32_io_set(&crisv32_led2_green, !(x)); - #define LED_ACTIVE_SET_R(x) \ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/irq.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/irq.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/irq.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/irq.h 2006-10-13 14:45:18.000000000 +0200 -@@ -50,7 +50,7 @@ - #define IRQ_NAME2(nr) nr##_interrupt(void) - #define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) - --/* -+/* - * The reason for setting the S-bit when debugging the kernel is that we want - * hardware breakpoints to remain active while we are in an exception handler. - * Note that we cannot simply copy S1, since we may come here from user-space, -@@ -86,7 +86,7 @@ - "moveq 1, $r11\n\t" \ - "jump ret_from_intr\n\t" \ - "nop\n\t"); --/* -+/* - * This is subtle. The timer interrupt is crucial and it should not be disabled - * for too long. However, if it had been a normal interrupt as per BUILD_IRQ, it - * would have been BLOCK'ed, and then softirq's are run before we return here to -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/juliette.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/juliette.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/juliette.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/juliette.h 2004-06-09 11:20:19.000000000 +0200 -@@ -166,7 +166,7 @@ - #define PA_NULL 0x3fff /* CCD/VIDEO */ - - typedef enum { -- jpeg = 0, -+ jpeg = 0, - dummy = 1 - } request_type; - -@@ -176,8 +176,8 @@ - halfsize = 2, - fieldsize = 3 - } size_type; -- --typedef enum { -+ -+typedef enum { - min = 0, - low = 1, - medium = 2, -@@ -192,14 +192,14 @@ - q6 = 11 - } compr_type; - --typedef enum { -+typedef enum { - deg_0 = 0, - deg_180 = 1, - deg_90 = 2, - deg_270 = 3 - } rotation_type; - --typedef enum { -+typedef enum { - auto_white = 0, - hold = 1, - fixed_outdoor = 2, -@@ -207,12 +207,12 @@ - fixed_fluor = 4 - } white_balance_type; - --typedef enum { -+typedef enum { - auto_exp = 0, - fixed_exp = 1 - } exposure_type; - --typedef enum { -+typedef enum { - no_window = 0, - center = 1, - top = 2, -@@ -242,7 +242,7 @@ - right_align = 2 - } alignment_type; - --typedef enum { -+typedef enum { - off = 0, - on = 1, - no = 0, -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/mmu.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/mmu.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/mmu.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/mmu.h 2004-11-23 19:36:19.000000000 +0100 -@@ -34,7 +34,7 @@ - * +-----+------+--------+-------+--------+-------+---------+ - */ - --/* -+/* - * Defines for accessing the bits. Also define some synonyms for use with - * the software-based defined bits below. - */ -@@ -46,7 +46,7 @@ - #define _PAGE_SILENT_READ (1 << 3) /* Same as above. */ - #define _PAGE_GLOBAL (1 << 4) /* Global page. */ - --/* -+/* - * The hardware doesn't care about these bits, but the kernel uses them in - * software. - */ -@@ -84,9 +84,9 @@ - - #define _KERNPG_TABLE (_PAGE_TABLE | _PAGE_KERNEL) - --/* CRISv32 can do page protection for execute. -+/* CRISv32 can do page protection for execute. - * Write permissions imply read permissions. -- * Note that the numbers are in Execute-Write-Read order! -+ * Note that the numbers are in Execute-Write-Read order! - */ - #define __P000 PAGE_NONE - #define __P001 PAGE_READONLY -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/offset.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/offset.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/offset.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/offset.h 2005-08-29 09:36:28.000000000 +0200 -@@ -27,7 +27,7 @@ - #define THREAD_usp 4 /* offsetof(struct thread_struct, usp) */ - #define THREAD_ccs 8 /* offsetof(struct thread_struct, ccs) */ - --#define TASK_pid 149 /* offsetof(struct task_struct, pid) */ -+#define TASK_pid 151 /* offsetof(struct task_struct, pid) */ - - #define LCLONE_VM 256 /* CLONE_VM */ - #define LCLONE_UNTRACED 8388608 /* CLONE_UNTRACED */ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/page.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/page.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/page.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/page.h 2006-10-13 14:45:18.000000000 +0200 -@@ -11,7 +11,7 @@ - * selected bit it's possible to convert between KSEG_x and 0x40000000 where the - * DRAM really resides. DRAM is virtually at 0xc. - */ --#ifndef CONFIG_ETRAXFS_SIM -+#ifndef CONFIG_ETRAXFS_SIM - #define __pa(x) ((unsigned long)(x) & 0x7fffffff) - #define __va(x) ((void *)((unsigned long)(x) | 0x80000000)) - #else -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/pinmux.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/pinmux.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/pinmux.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/pinmux.h 2005-07-02 14:30:13.000000000 +0200 -@@ -1,7 +1,7 @@ - #ifndef _ASM_CRIS_ARCH_PINMUX_H - #define _ASM_CRIS_ARCH_PINMUX_H - --#define PORT_B 0 -+#define PORT_B 0 - #define PORT_C 1 - #define PORT_D 2 - #define PORT_E 3 -@@ -34,6 +34,7 @@ - int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); - int crisv32_pinmux_alloc_fixed(enum fixed_function function); - int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); -+int crisv32_pinmux_dealloc_fixed(enum fixed_function function); - void crisv32_pinmux_dump(void); - - #endif -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/processor.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/processor.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/processor.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/processor.h 2006-10-13 14:45:18.000000000 +0200 -@@ -19,7 +19,7 @@ - unsigned long ccs; /* Saved flags register. */ - }; - --/* -+/* - * User-space process size. This is hardcoded into a few places, so don't - * changed it unless everything's clear! - */ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/ptrace.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/ptrace.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/ptrace.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/ptrace.h 2004-10-21 13:51:21.000000000 +0200 -@@ -49,7 +49,7 @@ - #define CCS_SHIFT 10 /* Shift count for each level in CCS */ - - /* pt_regs not only specifices the format in the user-struct during -- * ptrace but is also the frame format used in the kernel prologue/epilogues -+ * ptrace but is also the frame format used in the kernel prologue/epilogues - * themselves - */ - -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/spinlock.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/spinlock.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/spinlock.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/spinlock.h 2007-01-09 10:31:32.000000000 +0100 -@@ -19,7 +19,7 @@ - __asm__ volatile ("move.d %1,%0" \ - : "=m" (lock->lock) \ - : "r" (1) \ -- : "memory"); -+ : "memory"); - } - - static inline int _raw_spin_trylock(spinlock_t *lock) -@@ -80,7 +80,7 @@ - { - unsigned long flags; - local_irq_save(flags); -- _raw_spin_lock(&rw->lock); -+ _raw_spin_lock(&rw->lock); - - rw->counter++; - -@@ -92,7 +92,7 @@ - { - unsigned long flags; - local_irq_save(flags); -- _raw_spin_lock(&rw->lock); -+ _raw_spin_lock(&rw->lock); - - rw->counter--; - -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/system.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/system.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/system.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/system.h 2006-10-13 14:45:18.000000000 +0200 -@@ -39,7 +39,7 @@ - #define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long) (x),(ptr),sizeof(*(ptr)))) - --#define tas(ptr) (xchg((ptr),1)) -+#define tas(ptr) (xchg((ptr),1)) - - struct __xchg_dummy { unsigned long a[100]; }; - #define __xg(x) ((struct __xchg_dummy *)(x)) -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/timex.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/timex.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/timex.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/timex.h 2005-08-23 11:44:37.000000000 +0200 -@@ -6,8 +6,8 @@ - #include - - /* -- * The clock runs at 100MHz, we divide it by 1000000. If you change anything -- * here you must check time.c as well. -+ * The clock runs at 100MHz, we divide it by 1000000. If you change anything -+ * here you must check time.c as well. - */ - - #define CLOCK_TICK_RATE 100000000 /* Underlying frequency of the HZ timer */ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/tlb.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/tlb.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/tlb.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/tlb.h 2003-07-02 11:29:45.000000000 +0200 -@@ -2,8 +2,8 @@ - #define _CRIS_ARCH_TLB_H - - /* -- * The TLB is a 64-entry cache. Each entry has a 8-bit page_id that is used -- * to store the "process" it belongs to (=> fast mm context switch). The -+ * The TLB is a 64-entry cache. Each entry has a 8-bit page_id that is used -+ * to store the "process" it belongs to (=> fast mm context switch). The - * last page_id is never used so we can make TLB entries that never matches. - */ - #define NUM_TLB_ENTRIES 64 -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/uaccess.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/uaccess.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/uaccess.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/uaccess.h 2006-01-04 07:13:04.000000000 +0100 -@@ -1,4 +1,4 @@ --/* -+/* - * Authors: Hans-Peter Nilsson (hp@axis.com) - * - */ -diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/unistd.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/unistd.h ---- linux-2.6.19.2.old/include/asm-cris/arch-v32/unistd.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/unistd.h 2005-10-31 09:50:44.000000000 +0100 -@@ -16,7 +16,8 @@ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ -- : "r" (__n_)); \ -+ : "r" (__n_) \ -+ : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ -@@ -33,7 +34,8 @@ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ -- : "r" (__n_), "0" (__a)); \ -+ : "r" (__n_), "0" (__a) \ -+ : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ -@@ -51,7 +53,8 @@ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ -- : "r" (__n_), "0" (__a), "r" (__b)); \ -+ : "r" (__n_), "0" (__a), "r" (__b) \ -+ : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ -@@ -70,7 +73,8 @@ - ".endif\n\t" \ - "break 13" \ - : "=r" (__a) \ -- : "r" (__n_), "0" (__a), "r" (__b), "r" (__c)); \ -+ : "r" (__n_), "0" (__a), "r" (__b), "r" (__c) \ -+ : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ -@@ -91,12 +95,13 @@ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), \ -- "r" (__c), "r" (__d)); \ -+ "r" (__c), "r" (__d)\ -+ : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ - return (type) -1; \ --} -+} - - #define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ - type5,arg5) \ -@@ -114,7 +119,8 @@ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), \ -- "r" (__c), "r" (__d), "h" (__e)); \ -+ "r" (__c), "r" (__d), "h" (__e) \ -+ : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ -@@ -138,7 +144,8 @@ - "break 13" \ - : "=r" (__a) \ - : "r" (__n_), "0" (__a), "r" (__b), \ -- "r" (__c), "r" (__d), "h" (__e), "x" (__f)); \ -+ "r" (__c), "r" (__d), "h" (__e), "x" (__f) \ -+ : "memory"); \ - if (__a >= 0) \ - return (type) __a; \ - errno = -__a; \ -diff -urN linux-2.6.19.2.old/include/asm-cris/atomic.h linux-2.6.19.2.dev/include/asm-cris/atomic.h ---- linux-2.6.19.2.old/include/asm-cris/atomic.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/atomic.h 2006-07-03 15:11:43.000000000 +0200 -@@ -5,6 +5,7 @@ - - #include - #include -+#include - - /* - * Atomic operations that C can't guarantee us. Useful for -@@ -89,7 +90,7 @@ - unsigned long flags; - int retval; - cris_atomic_save(v, flags); -- retval = (v->counter)++; -+ retval = ++(v->counter); - cris_atomic_restore(v, flags); - return retval; - } -@@ -99,7 +100,7 @@ - unsigned long flags; - int retval; - cris_atomic_save(v, flags); -- retval = (v->counter)--; -+ retval = --(v->counter); - cris_atomic_restore(v, flags); - return retval; - } -diff -urN linux-2.6.19.2.old/include/asm-cris/axisflashmap.h linux-2.6.19.2.dev/include/asm-cris/axisflashmap.h ---- linux-2.6.19.2.old/include/asm-cris/axisflashmap.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/axisflashmap.h 2006-09-07 14:24:25.000000000 +0200 -@@ -15,18 +15,18 @@ - /* The partitiontable_head is located at offset +10: */ - struct partitiontable_head { - __u16 magic; /* PARTITION_TABLE_MAGIC */ -- __u16 size; /* Length of ptable block (not header) */ -- __u32 checksum; /* simple longword sum */ -+ __u16 size; /* Length of ptable block (entries + end marker) */ -+ __u32 checksum; /* simple longword sum, over entries + end marker */ - }; - - /* And followed by partition table entries */ - struct partitiontable_entry { -- __u32 offset; /* Offset is relative to the sector the ptable is in */ -- __u32 size; -+ __u32 offset; /* relative to the sector the ptable is in */ -+ __u32 size; /* in bytes */ - __u32 checksum; /* simple longword sum */ -- __u16 type; -- __u16 flags; /* bit 0: ro/rw = 1/0 */ -- __u32 future0; /* 16 bytes reserved for future use */ -+ __u16 type; /* see type codes below */ -+ __u16 flags; /* bit 0: ro/rw = 1/0 */ -+ __u32 future0; /* 16 bytes reserved for future use */ - __u32 future1; - __u32 future2; - __u32 future3; -@@ -35,10 +35,25 @@ - #define PARTITIONTABLE_END_MARKER 0xFFFFFFFF - #define PARTITIONTABLE_END_MARKER_SIZE 4 - --/*#define PARTITION_TYPE_RESCUE 0x0000?*/ /* Not used, maybe it should? */ -+#define PARTITIONTABLE_END_PAD 10 -+ -+/* Complete structure for whole partition table */ -+/* note that table may end before CONFIG_ETRAX_PTABLE_ENTRIES by setting -+ * offset of the last entry + 1 to PARTITIONTABLE_END_MARKER. -+ */ -+struct partitiontable { -+ __u8 skip[PARTITION_TABLE_OFFSET]; -+ struct partitiontable_head head; -+ struct partitiontable_entry entries[]; -+}; -+ - #define PARTITION_TYPE_PARAM 0x0001 - #define PARTITION_TYPE_KERNEL 0x0002 - #define PARTITION_TYPE_JFFS 0x0003 -+#define PARTITION_TYPE_JFFS2 0x0000 -+ -+#define PARTITION_FLAGS_READONLY_MASK 0x0001 -+#define PARTITION_FLAGS_READONLY 0x0001 - - /* The master mtd for the entire flash. */ - extern struct mtd_info* axisflash_mtd; -diff -urN linux-2.6.19.2.old/include/asm-cris/bitops.h linux-2.6.19.2.dev/include/asm-cris/bitops.h ---- linux-2.6.19.2.old/include/asm-cris/bitops.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/bitops.h 2007-01-09 10:31:32.000000000 +0100 -@@ -155,7 +155,7 @@ - #include - #include - --#include -+//#include - - #define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) - #define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) -diff -urN linux-2.6.19.2.old/include/asm-cris/bug.h linux-2.6.19.2.dev/include/asm-cris/bug.h ---- linux-2.6.19.2.old/include/asm-cris/bug.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/bug.h 2006-06-21 10:29:15.000000000 +0200 -@@ -1,4 +1,4 @@ - #ifndef _CRIS_BUG_H - #define _CRIS_BUG_H --#include -+#include - #endif -diff -urN linux-2.6.19.2.old/include/asm-cris/delay.h linux-2.6.19.2.dev/include/asm-cris/delay.h ---- linux-2.6.19.2.old/include/asm-cris/delay.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/delay.h 2006-10-11 19:46:19.000000000 +0200 -@@ -13,10 +13,13 @@ - - extern unsigned long loops_per_usec; /* arch/cris/mm/init.c */ - -+/* May be defined by arch/delay.h. */ -+#ifndef udelay - static inline void udelay(unsigned long usecs) - { - __delay(usecs * loops_per_usec); - } -+#endif - - #endif /* defined(_CRIS_DELAY_H) */ - -diff -urN linux-2.6.19.2.old/include/asm-cris/ethernet.h linux-2.6.19.2.dev/include/asm-cris/ethernet.h ---- linux-2.6.19.2.old/include/asm-cris/ethernet.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/ethernet.h 2006-07-06 07:58:52.000000000 +0200 -@@ -15,4 +15,7 @@ - #define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3 /* Auto neg duplex */ - #define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4 /* Full duplex */ - #define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5 /* Half duplex */ -+#define SET_ETH_ENABLE_LEDS SIOCDEVPRIVATE+6 /* Enable net LEDs */ -+#define SET_ETH_DISABLE_LEDS SIOCDEVPRIVATE+7 /* Disable net LEDs */ -+#define SET_ETH_AUTONEG SIOCDEVPRIVATE+8 - #endif /* _CRIS_ETHERNET_H */ -diff -urN linux-2.6.19.2.old/include/asm-cris/etraxgpio.h linux-2.6.19.2.dev/include/asm-cris/etraxgpio.h ---- linux-2.6.19.2.old/include/asm-cris/etraxgpio.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/etraxgpio.h 2007-01-09 10:31:32.000000000 +0100 -@@ -16,15 +16,19 @@ - * For ETRAX FS (ARCH_V32): - * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction - * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction -- * /dev/gpioc minor 2, 18 bit GPIO, each bit can change direction -- * /dev/gpiod minor 3, 18 bit GPIO, each bit can change direction -- * /dev/gpioe minor 4, 18 bit GPIO, each bit can change direction -- * /dev/leds minor 5, Access to leds depending on kernelconfig -+ * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction -+ * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction -+ * /dev/gpioe minor 5, 18 bit GPIO, each bit can change direction -+ * /dev/leds minor 2, Access to leds depending on kernelconfig - * - */ - #ifndef _ASM_ETRAXGPIO_H - #define _ASM_ETRAXGPIO_H - -+#ifndef __KERNEL__ -+#include -+#endif -+ - /* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */ - #ifdef CONFIG_ETRAX_ARCH_V10 - #define ETRAXGPIO_IOCTYPE 43 -@@ -42,8 +46,13 @@ - #define GPIO_MINOR_C 3 - #define GPIO_MINOR_D 4 - #define GPIO_MINOR_E 5 -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+#define GPIO_MINOR_V 6 -+#define GPIO_MINOR_LAST 6 -+#else - #define GPIO_MINOR_LAST 5 - #endif -+#endif - - /* supported ioctl _IOC_NR's */ - -diff -urN linux-2.6.19.2.old/include/asm-cris/fasttimer.h linux-2.6.19.2.dev/include/asm-cris/fasttimer.h ---- linux-2.6.19.2.old/include/asm-cris/fasttimer.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/fasttimer.h 2006-12-11 12:22:38.000000000 +0100 -@@ -1,9 +1,9 @@ --/* $Id: fasttimer.h,v 1.3 2004/05/14 10:19:19 starvik Exp $ -+/* - * linux/include/asm-cris/fasttimer.h - * - * Fast timers for ETRAX100LX - * This may be useful in other OS than Linux so use 2 space indentation... -- * Copyright (C) 2000, 2002 Axis Communications AB -+ * Copyright (C) 2000-2006 Axis Communications AB - */ - #include /* struct timeval */ - #include -@@ -12,11 +12,16 @@ - - typedef void fast_timer_function_type(unsigned long); - -+struct fasttime_t { -+ unsigned long tv_jiff; /* jiffies */ -+ unsigned long tv_usec; /* microseconds */ -+}; -+ - struct fast_timer{ /* Close to timer_list */ - struct fast_timer *next; - struct fast_timer *prev; -- struct timeval tv_set; -- struct timeval tv_expires; -+ struct fasttime_t tv_set; -+ struct fasttime_t tv_expires; - unsigned long delay_us; - fast_timer_function_type *function; - unsigned long data; -@@ -38,6 +43,6 @@ - void schedule_usleep(unsigned long us); - - --void fast_timer_init(void); -+int fast_timer_init(void); - - #endif -diff -urN linux-2.6.19.2.old/include/asm-cris/hardirq.h linux-2.6.19.2.dev/include/asm-cris/hardirq.h ---- linux-2.6.19.2.old/include/asm-cris/hardirq.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/hardirq.h 2005-10-31 09:50:43.000000000 +0100 -@@ -1,6 +1,7 @@ - #ifndef __ASM_HARDIRQ_H - #define __ASM_HARDIRQ_H - -+#include - #include - #include - -diff -urN linux-2.6.19.2.old/include/asm-cris/io.h linux-2.6.19.2.dev/include/asm-cris/io.h ---- linux-2.6.19.2.old/include/asm-cris/io.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/io.h 2006-01-04 07:13:03.000000000 +0100 -@@ -127,8 +127,8 @@ - - #define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(b),(c),(d)) - --/* The following is junk needed for the arch-independent code but which -- * we never use in the CRIS port -+/* I/O port access. Normally there is no I/O space on CRIS but when Cardbus/PCI -+ * is enable the request is passed through the bridge. - */ - - #define IO_SPACE_LIMIT 0xffff -diff -urN linux-2.6.19.2.old/include/asm-cris/irq_regs.h linux-2.6.19.2.dev/include/asm-cris/irq_regs.h ---- linux-2.6.19.2.old/include/asm-cris/irq_regs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/irq_regs.h 2007-01-09 10:31:32.000000000 +0100 -@@ -0,0 +1 @@ -+#include -diff -urN linux-2.6.19.2.old/include/asm-cris/pgtable.h linux-2.6.19.2.dev/include/asm-cris/pgtable.h ---- linux-2.6.19.2.old/include/asm-cris/pgtable.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/pgtable.h 2007-01-12 15:41:37.000000000 +0100 -@@ -279,7 +279,7 @@ - #define pte_unmap(pte) do { } while (0) - #define pte_unmap_nested(pte) do { } while (0) - #define pte_pfn(x) ((unsigned long)(__va((x).pte)) >> PAGE_SHIFT) --#define pfn_pte(pfn, prot) __pte((__pa((pfn) << PAGE_SHIFT)) | pgprot_val(prot)) -+#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - - #define pte_ERROR(e) \ - printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), pte_val(e)) -diff -urN linux-2.6.19.2.old/include/asm-cris/semaphore-helper.h linux-2.6.19.2.dev/include/asm-cris/semaphore-helper.h ---- linux-2.6.19.2.old/include/asm-cris/semaphore-helper.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/semaphore-helper.h 2005-08-23 11:44:35.000000000 +0200 -@@ -20,12 +20,12 @@ - /* - * These two _must_ execute atomically wrt each other. - */ --extern inline void wake_one_more(struct semaphore * sem) -+static inline void wake_one_more(struct semaphore * sem) - { - atomic_inc(&sem->waking); - } - --extern inline int waking_non_zero(struct semaphore *sem) -+static inline int waking_non_zero(struct semaphore *sem) - { - unsigned long flags; - int ret = 0; -@@ -40,7 +40,7 @@ - return ret; - } - --extern inline int waking_non_zero_interruptible(struct semaphore *sem, -+static inline int waking_non_zero_interruptible(struct semaphore *sem, - struct task_struct *tsk) - { - int ret = 0; -@@ -59,7 +59,7 @@ - return ret; - } - --extern inline int waking_non_zero_trylock(struct semaphore *sem) -+static inline int waking_non_zero_trylock(struct semaphore *sem) - { - int ret = 1; - unsigned long flags; -diff -urN linux-2.6.19.2.old/include/asm-cris/semaphore.h linux-2.6.19.2.dev/include/asm-cris/semaphore.h ---- linux-2.6.19.2.old/include/asm-cris/semaphore.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/semaphore.h 2006-01-04 07:13:03.000000000 +0100 -@@ -51,7 +51,6 @@ - { - sema_init(sem, 0); - } -- - extern void __down(struct semaphore * sem); - extern int __down_interruptible(struct semaphore * sem); - extern int __down_trylock(struct semaphore * sem); -diff -urN linux-2.6.19.2.old/include/asm-cris/smp.h linux-2.6.19.2.dev/include/asm-cris/smp.h ---- linux-2.6.19.2.old/include/asm-cris/smp.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/smp.h 2005-10-31 09:50:43.000000000 +0100 -@@ -4,7 +4,7 @@ - #include - - extern cpumask_t phys_cpu_present_map; --#define cpu_possible_map phys_cpu_present_map -+extern cpumask_t cpu_possible_map; - - #define __smp_processor_id() (current_thread_info()->cpu) - -diff -urN linux-2.6.19.2.old/include/asm-cris/sync_serial.h linux-2.6.19.2.dev/include/asm-cris/sync_serial.h ---- linux-2.6.19.2.old/include/asm-cris/sync_serial.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/sync_serial.h 2005-11-10 15:43:16.000000000 +0100 -@@ -1,9 +1,9 @@ --/* -+/* - * ioctl defines for synchronous serial port driver - * - * Copyright (c) 2001-2003 Axis Communications AB -- * -- * Author: Mikael Starvik -+ * -+ * Author: Mikael Starvik - * - */ - -@@ -24,7 +24,7 @@ - #define SSP150 0 - #define SSP300 1 - #define SSP600 2 --#define SSP1200 3 -+#define SSP1200 3 - #define SSP2400 4 - #define SSP4800 5 - #define SSP9600 6 -@@ -67,6 +67,7 @@ - /* Values for SSP_FRAME_SYNC */ - #define NORMAL_SYNC 1 - #define EARLY_SYNC 2 -+#define SECOND_WORD_SYNC 0x40000 - - #define BIT_SYNC 4 - #define WORD_SYNC 8 -@@ -86,6 +87,8 @@ - #define CLOCK_GATED 0x10000 - #define CLOCK_NOT_GATED 0x20000 - -+ -+ - /* Values for SSP_IPOLARITY and SSP_OPOLARITY */ - #define CLOCK_NORMAL 1 - #define CLOCK_INVERT 2 -diff -urN linux-2.6.19.2.old/include/asm-cris/thread_info.h linux-2.6.19.2.dev/include/asm-cris/thread_info.h ---- linux-2.6.19.2.old/include/asm-cris/thread_info.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/include/asm-cris/thread_info.h 2006-03-22 11:01:27.000000000 +0100 -@@ -32,6 +32,7 @@ - unsigned long flags; /* low level flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ -+ __u32 tls; /* TLS for this thread */ - - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF for user-thead -@@ -82,6 +83,7 @@ - #define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ - #define TIF_SIGPENDING 2 /* signal pending */ - #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -+#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ - #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ - #define TIF_MEMDIE 17 - -@@ -89,6 +91,7 @@ - #define _TIF_NOTIFY_RESUME (1< - -@@ -321,6 +353,7 @@ - #define __ARCH_WANT_SYS_SIGPENDING - #define __ARCH_WANT_SYS_SIGPROCMASK - #define __ARCH_WANT_SYS_RT_SIGACTION -+#define __ARCH_WANT_SYS_RT_SIGSUSPEND - - /* - * "Conditional" syscalls diff --git a/target/linux/etrax/patches/cris/002-arch-cris.patch b/target/linux/etrax/patches/cris/002-arch-cris.patch deleted file mode 100644 index ee35210cd5..0000000000 --- a/target/linux/etrax/patches/cris/002-arch-cris.patch +++ /dev/null @@ -1,24914 +0,0 @@ -diff -urN linux-2.6.19.2.old/arch/cris/Kconfig linux-2.6.19.2.dev/arch/cris/Kconfig ---- linux-2.6.19.2.old/arch/cris/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/Kconfig 2007-01-17 18:17:18.000000000 +0100 -@@ -16,6 +16,10 @@ - config RWSEM_XCHGADD_ALGORITHM - bool - -+config GENERIC_IOMAP -+ bool -+ default y -+ - config GENERIC_FIND_NEXT_BIT - bool - default y -@@ -42,6 +46,29 @@ - - source "fs/Kconfig.binfmt" - -+config GENERIC_HARDIRQS -+ bool -+ default y -+ -+config SMP -+ bool "SMP" -+ help -+ SMP support. Always Say N. -+ -+config NR_CPUS -+ int -+ depends on SMP -+ default 2 -+ -+config SCHED_MC -+ bool "Multi-core scheduler support" -+ depends on SMP -+ default y -+ help -+ Multi-core scheduler support improves the CPU scheduler's decision -+ making when dealing with multi-core CPU chips at a cost of slightly -+ increased overhead in some places. If unsure say N here. -+ - config ETRAX_CMDLINE - string "Kernel command line" - default "root=/dev/mtdblock3" -@@ -70,17 +97,11 @@ - timers). - This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled. - --config PREEMPT -- bool "Preemptible Kernel" -- help -- This option reduces the latency of the kernel when reacting to -- real-time or interactive events by allowing a low priority process to -- be preempted even if it is in kernel mode executing a system call. -- This allows applications to run more reliably even when the system is -- under load. -+config OOM_REBOOT -+ bool "Enable reboot at out of memory" - -- Say Y here if you are building a kernel for a desktop, embedded -- or real-time system. Say N if you are unsure. -+source "kernel/Kconfig.preempt" -+source "kernel/Kconfig.sched" - - source mm/Kconfig - -@@ -107,6 +128,16 @@ - help - Support the xsim ETRAX Simulator. - -+config ETRAXFS -+ bool "ETRAX-FS-V32" -+ help -+ Support CRIS V32. -+ -+config ETRAXFS_SIM -+ bool "ETRAX-FS-V32-Simulator" -+ help -+ Support CRIS V32 VCS simualtor. -+ - endchoice - - config ETRAX_ARCH_V10 -@@ -114,6 +145,11 @@ - default y if ETRAX100LX || ETRAX100LX_V2 - default n if !(ETRAX100LX || ETRAX100LX_V2) - -+config ETRAX_ARCH_V32 -+ bool -+ default y if ETRAXFS || ETRAXFS_SIM -+ default n if !(ETRAXFS || ETRAXFS_SIM) -+ - config ETRAX_DRAM_SIZE - int "DRAM size (dec, in MB)" - default "8" -@@ -121,12 +157,23 @@ - Size of DRAM (decimal in MB) typically 2, 8 or 16. - - config ETRAX_FLASH_BUSWIDTH -- int "Buswidth of flash in bytes" -+ int "Buswidth of NOR flash in bytes" - default "2" - help -- Width in bytes of the Flash bus (1, 2 or 4). Is usually 2. -+ Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2. - --source arch/cris/arch-v10/Kconfig -+config ETRAX_NANDFLASH_BUSWIDTH -+ int "Buswidth of NAND flash in bytes" -+ default "1" -+ help -+ Width in bytes of the NAND flash (1 or 2). -+ -+config ETRAX_FLASH1_SIZE -+ int "FLASH1 size (dec, in MB. 0 = Unknown)" -+ default "0" -+ -+# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32) -+source arch/cris/arch/Kconfig - - endmenu - -@@ -134,7 +181,8 @@ - - # bring in ETRAX built-in drivers - menu "Drivers for built-in interfaces" --source arch/cris/arch-v10/drivers/Kconfig -+# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32) -+source arch/cris/arch/drivers/Kconfig - - endmenu - -@@ -181,6 +229,10 @@ - - source "sound/Kconfig" - -+source "drivers/pcmcia/Kconfig" -+ -+source "drivers/pci/Kconfig" -+ - source "drivers/usb/Kconfig" - - source "arch/cris/Kconfig.debug" -diff -urN linux-2.6.19.2.old/arch/cris/Kconfig.debug linux-2.6.19.2.dev/arch/cris/Kconfig.debug ---- linux-2.6.19.2.old/arch/cris/Kconfig.debug 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/Kconfig.debug 2005-10-31 09:48:02.000000000 +0100 -@@ -1,14 +1,15 @@ - menu "Kernel hacking" - -+source "lib/Kconfig.debug" -+ - #bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC -+ - config PROFILING - bool "Kernel profiling support" - - config SYSTEM_PROFILER - bool "System profiling support" - --source "lib/Kconfig.debug" -- - config ETRAX_KGDB - bool "Use kernel GDB debugger" - depends on DEBUG_KERNEL -diff -urN linux-2.6.19.2.old/arch/cris/Makefile linux-2.6.19.2.dev/arch/cris/Makefile ---- linux-2.6.19.2.old/arch/cris/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/Makefile 2006-11-29 17:05:40.000000000 +0100 -@@ -1,4 +1,4 @@ --# $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $ -+# $Id: Makefile,v 1.41 2006/11/29 16:05:40 ricardw Exp $ - # cris/Makefile - # - # This file is included by the global makefile so that you can add your own -@@ -10,14 +10,11 @@ - # License. See the file "COPYING" in the main directory of this archive - # for more details. - --# A bug in ld prevents us from having a (constant-value) symbol in a --# "ORIGIN =" or "LENGTH =" expression. -- - arch-y := v10 - arch-$(CONFIG_ETRAX_ARCH_V10) := v10 - arch-$(CONFIG_ETRAX_ARCH_V32) := v32 - --# No config avaiable for make clean etc -+# No config available for make clean etc - ifneq ($(arch-y),) - SARCH := arch-$(arch-y) - else -@@ -52,79 +49,58 @@ - # cris object files path - OBJ_ARCH = $(objtree)/arch/$(ARCH) - --target_boot_arch_dir = $(OBJ_ARCH)/$(SARCH)/boot --target_boot_dir = $(OBJ_ARCH)/boot --src_boot_dir = $(SRC_ARCH)/boot --target_compressed_dir = $(OBJ_ARCH)/boot/compressed --src_compressed_dir = $(SRC_ARCH)/boot/compressed --target_rescue_dir = $(OBJ_ARCH)/boot/rescue --src_rescue_dir = $(SRC_ARCH)/boot/rescue -- --export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir -- --vmlinux.bin: vmlinux -- $(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin -- --timage: vmlinux.bin -- cat vmlinux.bin cramfs.img >timage -- --simimage: timage -- cp vmlinux.bin simvmlinux.bin -- --# the following will remake timage without compiling the kernel --# it does of course require that all object files exist... -- --cramfs: --## cramfs - Creates a cramfs image -- mkcramfs -b 8192 -m romfs_meta.txt root cramfs.img -- cat vmlinux.bin cramfs.img >timage -- --clinux: vmlinux.bin decompress.bin rescue.bin -- --decompress.bin: $(target_boot_dir) -- @$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin -- --$(target_rescue_dir)/rescue.bin: $(target_boot_dir) -- @$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin -+boot := arch/$(ARCH)/boot -+MACHINE := arch/$(ARCH)/$(SARCH) - --zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin --## zImage - Compressed kernel (gzip) -- @$(MAKE) -f $(src_boot_dir)/Makefile zImage -+all: zImage - --$(target_boot_dir): $(target_boot_arch_dir) -- ln -sfn $< $@ -- --$(target_boot_arch_dir): -- mkdir -p $@ -- --compressed: zImage -- --archmrproper: --archclean: -- @if [ -d arch/$(ARCH)/boot ]; then \ -- $(MAKE) $(clean)=arch/$(ARCH)/boot ; \ -- fi -- rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img -- rm -rf $(LD_SCRIPT).tmp -+zImage Image: vmlinux -+ $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ - - archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch - - # Create some links to make all tools happy - $(SRC_ARCH)/.links: - @rm -rf $(SRC_ARCH)/drivers -- @ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers -+ @ln -sfn $(SARCH)/drivers $(SRC_ARCH)/drivers - @rm -rf $(SRC_ARCH)/boot -- @ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot -+ @ln -sfn $(SARCH)/boot $(SRC_ARCH)/boot - @rm -rf $(SRC_ARCH)/lib -- @ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib -- @ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch -- @ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S -- @ln -sfn $(SRC_ARCH)/$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c -+ @ln -sfn $(SARCH)/lib $(SRC_ARCH)/lib -+ @rm -rf $(SRC_ARCH)/arch -+ @ln -sfn $(SARCH) $(SRC_ARCH)/arch -+ @rm -rf $(SRC_ARCH)/kernel/vmlinux.lds.S -+ @ln -sfn ../$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S -+ @rm -rf $(SRC_ARCH)/kernel/asm-offsets.c -+ @ln -sfn ../$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c - @touch $@ - - # Create link to sub arch includes - $(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) -- @echo ' Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink' -+ @echo ' SYMLINK include/asm-$(ARCH)/arch -> include/asm-$(ARCH)/$(SARCH)' - @rm -f include/asm-$(ARCH)/arch -- @ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch -+ @ln -sf $(SARCH) $(srctree)/include/asm-$(ARCH)/arch - @touch $@ -+ -+archclean: -+ $(Q)if [ -e arch/$(ARCH)/boot ]; then \ -+ $(MAKE) $(clean)=arch/$(ARCH)/boot; \ -+ fi -+ -+CLEAN_FILES += \ -+ $(MACHINE)/boot/zImage \ -+ $(SRC_ARCH)/.links \ -+ $(srctree)/include/asm-$(ARCH)/.arch -+ -+MRPROPER_FILES += \ -+ $(SRC_ARCH)/drivers \ -+ $(SRC_ARCH)/boot \ -+ $(SRC_ARCH)/lib \ -+ $(SRC_ARCH)/arch \ -+ $(SRC_ARCH)/kernel/vmlinux.lds.S \ -+ $(SRC_ARCH)/kernel/asm-offsets.c -+ -+define archhelp -+ echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' -+ echo '* Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' -+endef -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/README.mm linux-2.6.19.2.dev/arch/cris/arch-v10/README.mm ---- linux-2.6.19.2.old/arch/cris/arch-v10/README.mm 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/README.mm 2005-08-23 11:44:32.000000000 +0200 -@@ -3,6 +3,9 @@ - HISTORY: - - $Log: README.mm,v $ -+Revision 1.2 2005/08/23 09:44:32 starvik -+extern inline -> static inline. Patch provided by Adrian Bunk -+ - Revision 1.1 2001/12/17 13:59:27 bjornw - Initial revision - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/boot/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/Makefile 2006-11-29 17:05:40.000000000 +0100 -@@ -1,13 +1,21 @@ - # --# arch/cris/boot/Makefile -+# arch/cris/arch-v10/boot/Makefile - # --target = $(target_boot_dir) --src = $(src_boot_dir) - --zImage: compressed/vmlinuz -+OBJCOPY = objcopy-cris -+OBJCOPYFLAGS = -O binary --remove-section=.bss - --compressed/vmlinuz: -- @$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz -+subdir- := compressed rescue -+targets := Image - --clean: -- @$(MAKE) -f $(src)/compressed/Makefile clean -+$(obj)/Image: vmlinux FORCE -+ $(call if_changed,objcopy) -+ @echo ' Kernel: $@ is ready' -+ -+$(obj)/compressed/vmlinux: $(obj)/Image FORCE -+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@ -+ $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin -+ -+$(obj)/zImage: $(obj)/compressed/vmlinux -+ @cp $< $@ -+ @echo ' Kernel: $@ is ready' -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/Makefile 2006-10-11 17:47:04.000000000 +0200 -@@ -1,45 +1,34 @@ - # --# create a compressed vmlinuz image from the binary vmlinux.bin file -+# arch/cris/arch-v10/boot/compressed/Makefile - # --target = $(target_compressed_dir) --src = $(src_compressed_dir) - - CC = gcc-cris -melf $(LINUXINCLUDE) - CFLAGS = -O2 - LD = ld-cris -+LDFLAGS = -T $(obj)/decompress.ld -+OBJECTS = $(obj)/head.o $(obj)/misc.o - OBJCOPY = objcopy-cris - OBJCOPYFLAGS = -O binary --remove-section=.bss --OBJECTS = $(target)/head.o $(target)/misc.o - --# files to compress --SYSTEM = $(objtree)/vmlinux.bin -+quiet_cmd_image = BUILD $@ -+cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ - --all: $(target_compressed_dir)/vmlinuz -+targets := vmlinux piggy.gz decompress.o decompress.bin - --$(target)/decompress.bin: $(OBJECTS) -- $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS) -- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin -+$(obj)/decompress.o: $(OBJECTS) FORCE -+ $(call if_changed,ld) - --# Create vmlinuz image in top-level build directory --$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin -- @echo " COMPR vmlinux.bin --> vmlinuz" -- @cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz -- @rm -f piggy.img -+$(obj)/decompress.bin: $(obj)/decompress.o FORCE -+ $(call if_changed,objcopy) - --$(target)/head.o: $(src)/head.S -- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ -+$(obj)/head.o: $(obj)/head.S .config -+ @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ - --$(target)/misc.o: $(src)/misc.c -- $(CC) -D__KERNEL__ -c $< -o $@ -+$(obj)/misc.o: $(obj)/misc.c .config -+ @$(CC) -D__KERNEL__ -c $< -o $@ - --# gzip the kernel image -- --piggy.img: $(SYSTEM) -- @cat $(SYSTEM) | gzip -f -9 > piggy.img -- --$(target): -- mkdir -p $(target) -- --clean: -- rm -f piggy.img $(objtree)/vmlinuz -+$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE -+ $(call if_changed,image) - -+$(obj)/piggy.gz: $(obj)/../Image FORCE -+ $(call if_changed,gzip) -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/misc.c linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/misc.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/misc.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/misc.c 2006-10-13 14:43:10.000000000 +0200 -@@ -1,7 +1,7 @@ - /* - * misc.c - * -- * $Id: misc.c,v 1.6 2003/10/27 08:04:31 starvik Exp $ -+ * $Id: misc.c,v 1.7 2006/10/13 12:43:10 starvik Exp $ - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/Makefile 2006-11-30 11:42:39.000000000 +0100 -@@ -1,56 +1,38 @@ - # --# Makefile for rescue code -+# Makefile for rescue (bootstrap) code - # --target = $(target_rescue_dir) --src = $(src_rescue_dir) - - CC = gcc-cris -mlinux $(LINUXINCLUDE) - CFLAGS = -O2 --LD = gcc-cris -mlinux -nostdlib -+AFLAGS = -traditional -+LD = gcc-cris -mlinux -nostdlib -+LDFLAGS = -T $(obj)/rescue.ld - OBJCOPY = objcopy-cris - OBJCOPYFLAGS = -O binary --remove-section=.bss -+obj-y = head.o -+OBJECT = $(obj)/$(obj-y) - --all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin -+targets := rescue.o rescue.bin - --$(target)/rescue.bin: $(target) $(target)/head.o -- $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o -- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin --# Place a copy in top-level build directory -- cp -p $(target)/rescue.bin $(objtree) -+$(obj)/rescue.o: $(OBJECT) FORCE -+ $(call if_changed,ld) - --$(target)/testrescue.bin: $(target) $(target)/testrescue.o -- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin -+$(obj)/rescue.bin: $(obj)/rescue.o FORCE -+ $(call if_changed,objcopy) -+ cp -p $(obj)/rescue.bin $(objtree) -+ -+$(obj)/testrescue.bin: $(obj)/testrescue.o -+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin - # Pad it to 784 bytes - dd if=/dev/zero of=tmp2423 bs=1 count=784 - cat tr.bin tmp2423 >testrescue_tmp.bin -- dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784 -+ dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784 - rm tr.bin tmp2423 testrescue_tmp.bin - --$(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o -- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin -+$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o -+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin - # Pad it to 784 bytes, that's what the rescue loader expects - dd if=/dev/zero of=tmp2423 bs=1 count=784 - cat ktr.bin tmp2423 >kimagerescue_tmp.bin -- dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784 -+ dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784 - rm ktr.bin tmp2423 kimagerescue_tmp.bin -- --$(target): -- mkdir -p $(target) -- --$(target)/head.o: $(src)/head.S -- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o -- --$(target)/testrescue.o: $(src)/testrescue.S -- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o -- --$(target)/kimagerescue.o: $(src)/kimagerescue.S -- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o -- --clean: -- rm -f $(target)/*.o $(target)/*.bin -- --fastdep: -- --modules: -- --modules-install: -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/head.S linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/head.S ---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/head.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/head.S 2006-10-13 14:43:10.000000000 +0200 -@@ -1,4 +1,4 @@ --/* $Id: head.S,v 1.7 2005/03/07 12:11:06 starvik Exp $ -+/* $Id: head.S,v 1.9 2006/10/13 12:43:10 starvik Exp $ - * - * Rescue code, made to reside at the beginning of the - * flash-memory. when it starts, it checks a partition -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/kimagerescue.S linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/kimagerescue.S ---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/kimagerescue.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/kimagerescue.S 2006-11-29 17:05:41.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: kimagerescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ -+/* $Id: kimagerescue.S,v 1.3 2006/11/29 16:05:41 ricardw Exp $ - * - * Rescue code to be prepended on a kimage and copied to the - * rescue serial port. -@@ -7,7 +7,7 @@ - */ - - #define ASSEMBLER_MACROS_ONLY --#include -+#include - - #define CODE_START 0x40004000 - #define CODE_LENGTH 784 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/testrescue.S linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/testrescue.S ---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/testrescue.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/testrescue.S 2006-11-29 17:05:41.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: testrescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ -+/* $Id: testrescue.S,v 1.2 2006/11/29 16:05:41 ricardw Exp $ - * - * Simple testcode to download by the rescue block. - * Just lits some LEDs to show it was downloaded correctly. -@@ -7,7 +7,7 @@ - */ - - #define ASSEMBLER_MACROS_ONLY --#include -+#include - - .text - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/defconfig linux-2.6.19.2.dev/arch/cris/arch-v10/defconfig ---- linux-2.6.19.2.old/arch/cris/arch-v10/defconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/defconfig 2006-01-03 15:48:23.000000000 +0100 -@@ -106,7 +106,6 @@ - CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y - # CONFIG_ETRAX_I2C_EEPROM is not set - CONFIG_ETRAX_GPIO=y --CONFIG_ETRAX_PA_BUTTON_BITMASK=02 - CONFIG_ETRAX_PA_CHANGEABLE_DIR=00 - CONFIG_ETRAX_PA_CHANGEABLE_BITS=FF - CONFIG_ETRAX_PB_CHANGEABLE_DIR=00 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Kconfig linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Kconfig ---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Kconfig 2007-01-09 10:29:18.000000000 +0100 -@@ -6,6 +6,12 @@ - This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet - controller. - -+config ETRAX_NO_PHY -+ bool "PHY not present" -+ depends on ETRAX_ETHERNET -+ help -+ Enable if PHY is not present. -+ - choice - prompt "Network LED behavior" - depends on ETRAX_ETHERNET -@@ -90,7 +96,7 @@ - - config ETRAX_SERIAL_PORT0_DMA6_OUT - bool "DMA 6" -- -+ depends on !ETRAX_DEBUG_PORT0 - endchoice - - choice -@@ -103,7 +109,7 @@ - - config ETRAX_SERIAL_PORT0_DMA7_IN - bool "DMA 7" -- -+ depends on !ETRAX_DEBUG_PORT0 - endchoice - - choice -@@ -204,7 +210,7 @@ - - config ETRAX_SERIAL_PORT1_DMA8_OUT - bool "DMA 8" -- -+ depends on !ETRAX_DEBUG_PORT1 - endchoice - - choice -@@ -217,7 +223,7 @@ - - config ETRAX_SERIAL_PORT1_DMA9_IN - bool "DMA 9" -- -+ depends on !ETRAX_DEBUG_PORT1 - endchoice - - choice -@@ -321,7 +327,7 @@ - - config ETRAX_SERIAL_PORT2_DMA2_OUT - bool "DMA 2" -- -+ depends on !ETRAX_DEBUG_PORT2 - endchoice - - choice -@@ -334,7 +340,7 @@ - - config ETRAX_SERIAL_PORT2_DMA3_IN - bool "DMA 3" -- -+ depends on !ETRAX_DEBUG_PORT2 - endchoice - - choice -@@ -435,7 +441,7 @@ - - config ETRAX_SERIAL_PORT3_DMA4_OUT - bool "DMA 4" -- -+ depends on !ETRAX_DEBUG_PORT3 - endchoice - - choice -@@ -448,7 +454,7 @@ - - config ETRAX_SERIAL_PORT3_DMA5_IN - bool "DMA 5" -- -+ depends on !ETRAX_DEBUG_PORT3 - endchoice - - choice -@@ -514,8 +520,7 @@ - bool "RS-485 support" - depends on ETRAX_SERIAL - help -- Enables support for RS-485 serial communication. For a primer on -- RS-485, see . -+ Enables support for RS-485 serial communication. - - config ETRAX_RS485_ON_PA - bool "RS-485 mode on PA" -@@ -541,6 +546,27 @@ - loopback. Not all products are able to do this in software only. - Axis 2400/2401 must disable receiver. - -+config ETRAX_SYNCHRONOUS_SERIAL -+ bool "Synchronous serial port driver" -+ help -+ Select this to enable the synchronous serial port driver. -+ -+config ETRAX_SYNCHRONOUS_SERIAL_PORT0 -+ bool "Synchronous serial port 0 enabled (sser1)" -+ depends on ETRAX_SYNCHRONOUS_SERIAL -+ -+config ETRAX_SYNCHRONOUS_SERIAL0_DMA -+ bool "Use DMA for synchronous serial port 0" -+ depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0 -+ -+config ETRAX_SYNCHRONOUS_SERIAL_PORT1 -+ bool "Synchronous serial port 1 enabled (sser3)" -+ depends on ETRAX_SYNCHRONOUS_SERIAL -+ -+config ETRAX_SYNCHRONOUS_SERIAL1_DMA -+ bool "Use DMA for synchronous serial port 1" -+ depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1 -+ - config ETRAX_IDE - bool "ATA/IDE support" - select IDE -@@ -604,8 +630,7 @@ - select MTD - select MTD_CFI - select MTD_CFI_AMDSTD -- select MTD_OBSOLETE_CHIPS -- select MTD_AMDSTD -+ select MTD_JEDECPROBE - select MTD_CHAR - select MTD_BLOCK - select MTD_PARTITIONS -@@ -615,6 +640,15 @@ - This option enables MTD mapping of flash devices. Needed to use - flash memories. If unsure, say Y. - -+config ETRAX_AXISFLASHMAP_MTD0WHOLE -+ bool "MTD0 is whole boot flash device" -+ depends on ETRAX_AXISFLASHMAP -+ default N -+ help -+ When this option is not set, mtd0 refers to the first partition -+ on the boot flash device. When set, mtd0 refers to the whole -+ device, with mtd1 referring to the first partition etc. -+ - config ETRAX_PTABLE_SECTOR - int "Byte-offset of partition table sector" - depends on ETRAX_AXISFLASHMAP -@@ -715,19 +749,6 @@ - Remember that you need to setup the port directions appropriately in - the General configuration. - --config ETRAX_PA_BUTTON_BITMASK -- hex "PA-buttons bitmask" -- depends on ETRAX_GPIO -- default "02" -- help -- This is a bitmask with information about what bits on PA that -- are used for buttons. -- Most products has a so called TEST button on PA1, if that's true -- use 02 here. -- Use 00 if there are no buttons on PA. -- If the bitmask is <> 00 a button driver will be included in the gpio -- driver. ETRAX general I/O support must be enabled. -- - config ETRAX_PA_CHANGEABLE_DIR - hex "PA user changeable dir mask" - depends on ETRAX_GPIO -@@ -768,6 +789,40 @@ - Bit set = changeable. - You probably want 00 here. - -+config ETRAX_DEF_R_PORT_G_DIR -+ bool "Port G Output" -+ help -+ CONFIG_ETRAX_DEF_R_PORT_G_DIR: -+ Set the direction of specified pins to output. -+ -+config ETRAX_DEF_R_PORT_G0_DIR_OUT -+ bool "G0" -+ depends on ETRAX_DEF_R_PORT_G_DIR -+ help -+ CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT: -+ Set G0 to output. -+ -+config ETRAX_DEF_R_PORT_G8_15_DIR_OUT -+ bool "G8-G15" -+ depends on ETRAX_DEF_R_PORT_G_DIR -+ help -+ CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT: -+ Set G8-G15 to output. -+ -+config ETRAX_DEF_R_PORT_G16_23_DIR_OUT -+ bool "G16-G23" -+ depends on ETRAX_DEF_R_PORT_G_DIR -+ help -+ CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT: -+ Set G16-G23 to output. -+ -+config ETRAX_DEF_R_PORT_G24_DIR_OUT -+ bool "G24" -+ depends on ETRAX_DEF_R_PORT_G_DIR -+ help -+ CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT: -+ Set G24 to output. -+ - config ETRAX_RTC - bool "Real Time Clock support" - depends on ETRAX_ARCH_V10 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Makefile 2005-12-12 10:05:46.000000000 +0100 -@@ -8,5 +8,5 @@ - obj-$(CONFIG_ETRAX_GPIO) += gpio.o - obj-$(CONFIG_ETRAX_DS1302) += ds1302.o - obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o -- -+obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/axisflashmap.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/axisflashmap.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/axisflashmap.c 2006-11-22 13:26:55.000000000 +0100 -@@ -11,6 +11,26 @@ - * partition split defined below. - * - * $Log: axisflashmap.c,v $ -+ * Revision 1.17 2006/11/22 12:26:55 ricardw -+ * Added CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE option which when enabled puts mtd0 -+ * as whole device, with first partition at mtd1, etc. -+ * -+ * Revision 1.16 2006/10/30 15:17:57 pkj -+ * Avoid a compiler warning. -+ * -+ * Revision 1.15 2006/10/13 12:43:10 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.14 2006/08/30 13:20:00 karljope -+ * Do not use deprecated amd_flash to probe flash memory. -+ * Probe for flash chip with CFI first and if no chip was found try jedec_probe. -+ * -+ * Revision 1.13 2006/01/04 06:09:45 starvik -+ * Merge of Linux 2.6.15 -+ * -+ * Revision 1.12 2005/06/21 09:13:06 starvik -+ * Change const char* to const char[] to save space (from domen@coderock.org). -+ * - * Revision 1.11 2004/11/15 10:27:14 starvik - * Corrected typo (Thanks to Milton Miller ). - * -@@ -300,6 +320,15 @@ - }, - }; - -+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE -+/* Main flash device */ -+static struct mtd_partition main_partition = { -+ .name = "main", -+ .size = 0, -+ .offset = 0 -+}; -+#endif -+ - /* - * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash - * chips in that order (because the amd_flash-driver is faster). -@@ -312,12 +341,12 @@ - "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", - map_cs->name, map_cs->size, map_cs->map_priv_1); - --#ifdef CONFIG_MTD_AMDSTD -- mtd_cs = do_map_probe("amd_flash", map_cs); --#endif - #ifdef CONFIG_MTD_CFI -+ mtd_cs = do_map_probe("cfi_probe", map_cs); -+#endif -+#ifdef CONFIG_MTD_JEDECPROBE - if (!mtd_cs) { -- mtd_cs = do_map_probe("cfi_probe", map_cs); -+ mtd_cs = do_map_probe("jedec_probe", map_cs); - } - #endif - -@@ -396,7 +425,7 @@ - struct partitiontable_head *ptable_head = NULL; - struct partitiontable_entry *ptable; - int use_default_ptable = 1; /* Until proven otherwise. */ -- const char *pmsg = " /dev/flash%d at 0x%08x, size 0x%08x\n"; -+ const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n"; - - if (!(mymtd = flash_probe())) { - /* There's no reason to use this module if no flash chip can -@@ -491,6 +520,16 @@ - pidx++; - } - -+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE -+ if (mymtd) { -+ main_partition.size = mymtd->size; -+ err = add_mtd_partitions(mymtd, &main_partition, 1); -+ if (err) -+ panic("axisflashmap: Could not initialize " -+ "partition for whole main mtd device!\n"); -+ } -+#endif -+ - if (mymtd) { - if (use_default_ptable) { - printk(KERN_INFO " Using default partition table.\n"); -@@ -524,7 +563,7 @@ - } - - printk(KERN_INFO " Adding RAM partition for romfs image:\n"); -- printk(pmsg, pidx, romfs_start, romfs_length); -+ printk(pmsg, pidx, (unsigned)romfs_start, (unsigned)romfs_length); - - err = mtdram_init_device(mtd_ram, (void*)romfs_start, - romfs_length, "romfs"); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/ds1302.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/ds1302.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/ds1302.c 2006-10-27 16:31:23.000000000 +0200 -@@ -6,136 +6,9 @@ - *! - *! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init - *! --*! $Log: ds1302.c,v $ --*! Revision 1.18 2005/01/24 09:11:26 mikaelam --*! Minor changes to get DS1302 RTC chip driver to work --*! --*! Revision 1.17 2005/01/05 06:11:22 starvik --*! No need to do local_irq_disable after local_irq_save. --*! --*! Revision 1.16 2004/12/13 12:21:52 starvik --*! Added I/O and DMA allocators from Linux 2.4 --*! --*! Revision 1.14 2004/08/24 06:48:43 starvik --*! Whitespace cleanup --*! --*! Revision 1.13 2004/05/28 09:26:59 starvik --*! Modified I2C initialization to work in 2.6. --*! --*! Revision 1.12 2004/05/14 07:58:03 starvik --*! Merge of changes from 2.4 --*! --*! Revision 1.10 2004/02/04 09:25:12 starvik --*! Merge of Linux 2.6.2 --*! --*! Revision 1.9 2003/07/04 08:27:37 starvik --*! Merge of Linux 2.5.74 --*! --*! Revision 1.8 2003/04/09 05:20:47 starvik --*! Merge of Linux 2.5.67 --*! --*! Revision 1.6 2003/01/09 14:42:51 starvik --*! Merge of Linux 2.5.55 --*! --*! Revision 1.4 2002/12/11 13:13:57 starvik --*! Added arch/ to v10 specific includes --*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) --*! --*! Revision 1.3 2002/11/20 11:56:10 starvik --*! Merge of Linux 2.5.48 --*! --*! Revision 1.2 2002/11/18 13:16:06 starvik --*! Linux 2.5 port of latest 2.4 drivers --*! --*! Revision 1.15 2002/10/11 16:14:33 johana --*! Added CONFIG_ETRAX_DS1302_TRICKLE_CHARGE and initial setting of the --*! trcklecharge register. --*! --*! Revision 1.14 2002/10/10 12:15:38 magnusmn --*! Added support for having the RST signal on bit g0 --*! --*! Revision 1.13 2002/05/29 15:16:08 johana --*! Removed unused variables. --*! --*! Revision 1.12 2002/04/10 15:35:25 johana --*! Moved probe function closer to init function and marked it __init. --*! --*! Revision 1.11 2001/06/14 12:35:52 jonashg --*! The ATA hack is back. It is unfortunately the only way to set g27 to output. --*! --*! Revision 1.9 2001/06/14 10:00:14 jonashg --*! No need for tempudelay to be inline anymore (had to adjust the usec to --*! loops conversion because of this to make it slow enough to be a udelay). --*! --*! Revision 1.8 2001/06/14 08:06:32 jonashg --*! Made tempudelay delay usecs (well, just a tad more). --*! --*! Revision 1.7 2001/06/13 14:18:11 jonashg --*! Only allow processes with SYS_TIME capability to set time and charge. --*! --*! Revision 1.6 2001/06/12 15:22:07 jonashg --*! * Made init function __init. --*! * Parameter to out_byte() is unsigned char. --*! * The magic number 42 has got a name. --*! * Removed comment about /proc (nothing is exported there). --*! --*! Revision 1.5 2001/06/12 14:35:13 jonashg --*! Gave the module a name and added it to printk's. --*! --*! Revision 1.4 2001/05/31 14:53:40 jonashg --*! Made tempudelay() inline so that the watchdog doesn't reset (see --*! function comment). --*! --*! Revision 1.3 2001/03/26 16:03:06 bjornw --*! Needs linux/config.h --*! --*! Revision 1.2 2001/03/20 19:42:00 bjornw --*! Use the ETRAX prefix on the DS1302 options --*! --*! Revision 1.1 2001/03/20 09:13:50 magnusmn --*! Linux 2.4 port --*! --*! Revision 1.10 2000/07/05 15:38:23 bjornw --*! Dont update kernel time when a RTC_SET_TIME is done --*! --*! Revision 1.9 2000/03/02 15:42:59 macce --*! * Hack to make RTC work on all 2100/2400 --*! --*! Revision 1.8 2000/02/23 16:59:18 torbjore --*! added setup of R_GEN_CONFIG when RTC is connected to the generic port. --*! --*! Revision 1.7 2000/01/17 15:51:43 johana --*! Added RTC_SET_CHARGE ioctl to enable trickle charger. --*! --*! Revision 1.6 1999/10/27 13:19:47 bjornw --*! Added update_xtime_from_cmos which reads back the updated RTC into the kernel. --*! /dev/rtc calls it now. --*! --*! Revision 1.5 1999/10/27 12:39:37 bjornw --*! Disabled superuser check. Anyone can now set the time. --*! --*! Revision 1.4 1999/09/02 13:27:46 pkj --*! Added shadow for R_PORT_PB_CONFIG. --*! Renamed port_g_shadow to port_g_data_shadow. --*! --*! Revision 1.3 1999/09/02 08:28:06 pkj --*! Made it possible to select either port PB or the generic port for the RST --*! signal line to the DS1302 RTC. --*! Also make sure the RST bit is configured as output on Port PB (if used). --*! --*! Revision 1.2 1999/09/01 14:47:20 bjornw --*! Added support for /dev/rtc operations with ioctl RD_TIME and SET_TIME to read --*! and set the date. Register as major 121. --*! --*! Revision 1.1 1999/09/01 09:45:29 bjornw --*! Implemented a DS1302 RTC driver. --*! --*! - *! --------------------------------------------------------------------------- - *! --*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB, LUND, SWEDEN --*! --*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $ -+*! (C) Copyright 1999-2006 Axis Communications AB, LUND, SWEDEN - *! - *!***************************************************************************/ - -@@ -305,14 +178,7 @@ - void - ds1302_writereg(int reg, unsigned char val) - { --#ifndef CONFIG_ETRAX_RTC_READONLY - int do_writereg = 1; --#else -- int do_writereg = 0; -- -- if (reg == RTC_TRICKLECHARGER) -- do_writereg = 1; --#endif - - if (do_writereg) { - ds1302_wenable(); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/eeprom.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/eeprom.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/eeprom.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/eeprom.c 2006-10-13 14:43:10.000000000 +0200 -@@ -20,6 +20,9 @@ - *! in the spin-lock. - *! - *! $Log: eeprom.c,v $ -+*! Revision 1.13 2006/10/13 12:43:10 starvik -+*! Merge of 2.6.18 -+*! - *! Revision 1.12 2005/06/19 17:06:46 starvik - *! Merge of Linux 2.6.12. - *! -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/gpio.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/gpio.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/gpio.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/gpio.c 2007-02-05 12:54:34.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: gpio.c,v 1.17 2005/06/19 17:06:46 starvik Exp $ -+/* $Id: gpio.c,v 1.28 2007/02/05 11:54:34 pkj Exp $ - * - * Etrax general port I/O device - * -@@ -9,6 +9,40 @@ - * Johan Adolfsson (read/set directions, write, port G) - * - * $Log: gpio.c,v $ -+ * Revision 1.28 2007/02/05 11:54:34 pkj -+ * Merge of Linux 2.6.19 -+ * -+ * Revision 1.27 2006/12/12 11:08:30 edgar -+ * In etrax_gpio_wake_up_check(), make flags unsigned long. -+ * -+ * Revision 1.26 2006/11/02 10:54:29 pkj -+ * Restored unique device id for request_irq() which was lost in the -+ * merge of 2.6.18. -+ * -+ * Revision 1.25 2006/10/13 12:43:10 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.24 2006/07/13 07:42:20 starvik -+ * Set unique device id in request_irq -+ * -+ * Revision 1.23 2006/06/21 09:38:46 starvik -+ * Use correct spinlock macros -+ * -+ * Revision 1.22 2005/08/29 07:32:16 starvik -+ * Merge of 2.6.13 -+ * -+ * Revision 1.21 2005/08/16 17:10:54 edgar -+ * dont leave locked spinlocks when returning. -+ * -+ * Revision 1.20 2005/08/15 13:10:47 orjanf -+ * Don't link struct into alarmlist until fully initialized. -+ * -+ * Revision 1.19 2005/07/13 11:43:11 karljope -+ * Corrected typo -+ * -+ * Revision 1.18 2005/06/21 12:26:53 starvik -+ * Improved alarm list locking. -+ * - * Revision 1.17 2005/06/19 17:06:46 starvik - * Merge of Linux 2.6.12. - * -@@ -277,7 +311,7 @@ - unsigned int mask = 0; - struct gpio_private *priv = (struct gpio_private *)file->private_data; - unsigned long data; -- spin_lock(&gpio_lock); -+ spin_lock_irq(&gpio_lock); - poll_wait(file, &priv->alarm_wq, wait); - if (priv->minor == GPIO_MINOR_A) { - unsigned long flags; -@@ -297,15 +331,17 @@ - data = *R_PORT_PB_DATA; - else if (priv->minor == GPIO_MINOR_G) - data = *R_PORT_G_DATA; -- else -+ else { -+ spin_unlock_irq(&gpio_lock); - return 0; -+ } - - if ((data & priv->highalarm) || - (~data & priv->lowalarm)) { - mask = POLLIN|POLLRDNORM; - } - -- spin_unlock(&gpio_lock); -+ spin_unlock_irq(&gpio_lock); - - DP(printk("gpio_poll ready: mask 0x%08X\n", mask)); - -@@ -314,10 +350,12 @@ - - int etrax_gpio_wake_up_check(void) - { -- struct gpio_private *priv = alarmlist; -+ struct gpio_private *priv; - unsigned long data = 0; - int ret = 0; -- spin_lock(&gpio_lock); -+ unsigned long flags; -+ spin_lock_irqsave(&gpio_lock, flags); -+ priv = alarmlist; - while (priv) { - if (USE_PORTS(priv)) { - data = *priv->port; -@@ -332,12 +370,12 @@ - } - priv = priv->next; - } -- spin_unlock(&gpio_lock); -+ spin_unlock_irqrestore(&gpio_lock, flags); - return ret; - } - - static irqreturn_t --gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+gpio_poll_timer_interrupt(int irq, void *dev_id) - { - if (gpio_some_alarms) { - etrax_gpio_wake_up_check(); -@@ -347,7 +385,7 @@ - } - - static irqreturn_t --gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+gpio_pa_interrupt(int irq, void *dev_id) - { - unsigned long tmp; - spin_lock(&gpio_lock); -@@ -376,9 +414,6 @@ - struct gpio_private *priv = (struct gpio_private *)file->private_data; - unsigned char data, clk_mask, data_mask, write_msb; - unsigned long flags; -- -- spin_lock(&gpio_lock); -- - ssize_t retval = count; - if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) { - return -EFAULT; -@@ -394,6 +429,7 @@ - if (clk_mask == 0 || data_mask == 0) { - return -EPERM; - } -+ spin_lock_irq(&gpio_lock); - write_msb = priv->write_msb; - D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb)); - while (count--) { -@@ -425,7 +461,7 @@ - } - } - } -- spin_unlock(&gpio_lock); -+ spin_unlock_irq(&gpio_lock); - return retval; - } - -@@ -445,13 +481,12 @@ - - if (!priv) - return -ENOMEM; -+ memset(priv, 0, sizeof(*priv)); - - priv->minor = p; - -- /* initialize the io/alarm struct and link it into our alarmlist */ -+ /* initialize the io/alarm struct */ - -- priv->next = alarmlist; -- alarmlist = priv; - if (USE_PORTS(priv)) { /* A and B */ - priv->port = ports[p]; - priv->shadow = shads[p]; -@@ -476,6 +511,12 @@ - - filp->private_data = (void *)priv; - -+ /* link it into our alarmlist */ -+ spin_lock_irq(&gpio_lock); -+ priv->next = alarmlist; -+ alarmlist = priv; -+ spin_unlock_irq(&gpio_lock); -+ - return 0; - } - -@@ -485,10 +526,10 @@ - struct gpio_private *p; - struct gpio_private *todel; - -- spin_lock(&gpio_lock); -+ spin_lock_irq(&gpio_lock); - -- p = alarmlist; -- todel = (struct gpio_private *)filp->private_data; -+ p = alarmlist; -+ todel = (struct gpio_private *)filp->private_data; - - /* unlink from alarmlist and free the private structure */ - -@@ -506,12 +547,13 @@ - while (p) { - if (p->highalarm | p->lowalarm) { - gpio_some_alarms = 1; -+ spin_unlock_irq(&gpio_lock); - return 0; - } - p = p->next; - } - gpio_some_alarms = 0; -- spin_unlock(&gpio_lock); -+ spin_unlock_irq(&gpio_lock); - return 0; - } - -@@ -691,6 +733,8 @@ - /* Must update gpio_some_alarms */ - struct gpio_private *p = alarmlist; - int some_alarms; -+ spin_lock_irq(&gpio_lock); -+ p = alarmlist; - some_alarms = 0; - while (p) { - if (p->highalarm | p->lowalarm) { -@@ -700,6 +744,7 @@ - p = p->next; - } - gpio_some_alarms = some_alarms; -+ spin_unlock_irq(&gpio_lock); - } - break; - case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ -@@ -937,11 +982,11 @@ - * in some tests. - */ - if (request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt, -- IRQF_SHARED | IRQF_DISABLED,"gpio poll", NULL)) { -+ IRQF_SHARED | IRQF_DISABLED,"gpio poll", gpio_name)) { - printk(KERN_CRIT "err: timer0 irq for gpio\n"); - } - if (request_irq(PA_IRQ_NBR, gpio_pa_interrupt, -- IRQF_SHARED | IRQF_DISABLED,"gpio PA", NULL)) { -+ IRQF_SHARED | IRQF_DISABLED,"gpio PA", gpio_name)) { - printk(KERN_CRIT "err: PA irq for gpio\n"); - } - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/i2c.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/i2c.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/i2c.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/i2c.c 2006-10-13 14:43:10.000000000 +0200 -@@ -11,7 +11,25 @@ - *! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff - - *! don't use PB_I2C if DS1302 uses same bits, - *! use PB. -+*! June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now -+*! generates nack on last received byte, -+*! instead of ack. -+*! i2c_getack changed data level while clock -+*! was high, causing DS75 to see a stop condition -+*! - *! $Log: i2c.c,v $ -+*! Revision 1.17 2006/10/13 12:43:10 starvik -+*! Merge of 2.6.18 -+*! -+*! Revision 1.16 2005/09/29 13:33:35 bjarne -+*! If "first" should have any purpos it should probably change value.... -+*! -+*! Revision 1.15 2005/08/29 07:32:16 starvik -+*! Merge of 2.6.13 -+*! -+*! Revision 1.14 2005/06/30 18:07:31 starvik -+*! Added the sendnack patch from 2.4. -+*! - *! Revision 1.13 2005/03/07 13:13:07 starvik - *! Added spinlocks to protect states etc - *! -@@ -84,7 +102,7 @@ - *! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN - *! - *!***************************************************************************/ --/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */ -+/* $Id: i2c.c,v 1.17 2006/10/13 12:43:10 starvik Exp $ */ - - /****************** INCLUDE FILES SECTION ***********************************/ - -@@ -480,7 +498,7 @@ - i2c_delay(CLOCK_HIGH_TIME); - i2c_clk(I2C_CLOCK_LOW); - i2c_delay(CLOCK_LOW_TIME); -- -+ - i2c_dir_in(); - } - -@@ -622,7 +640,7 @@ - * last received byte needs to be nacked - * instead of acked - */ -- i2c_sendack(); -+ i2c_sendnack(); - /* - * end sequence - */ -@@ -708,6 +726,7 @@ - if (!first) { - return res; - } -+ first = 0; - - /* Setup and enable the Port B I2C interface */ - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/pcf8563.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/pcf8563.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/pcf8563.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/pcf8563.c 2006-10-27 17:22:12.000000000 +0200 -@@ -8,14 +8,13 @@ - * low detector are also provided. All address and data are transferred - * serially via two-line bidirectional I2C-bus. Maximum bus speed is - * 400 kbits/s. The built-in word address register is incremented -- * automatically after each written or read bute. -+ * automatically after each written or read byte. - * -- * Copyright (c) 2002, Axis Communications AB -+ * Copyright (c) 2002-2006, Axis Communications AB - * All rights reserved. - * - * Author: Tobias Anderberg . - * -- * $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $ - */ - - #include -@@ -27,93 +26,105 @@ - #include - #include - #include --#include - - #include - #include - #include --#include - #include -+ - #include "i2c.h" - --#define PCF8563_MAJOR 121 /* Local major number. */ --#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ --#define PCF8563_NAME "PCF8563" --#define DRIVER_VERSION "$Revision: 1.11 $" -- --/* I2C bus slave registers. */ --#define RTC_I2C_READ 0xa3 --#define RTC_I2C_WRITE 0xa2 -+#define PCF8563_MAJOR 121 /* Local major number. */ -+#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ -+#define PCF8563_NAME "PCF8563" -+#define DRIVER_VERSION "$Revision: 1.18 $" - - /* Two simple wrapper macros, saves a few keystrokes. */ - #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) - #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) - - static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */ -- -+ - static const unsigned char days_in_month[] = - { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; - - int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); - -+/* Cache VL bit value read at driver init since writing the RTC_SECOND -+ * register clears the VL status. -+ */ -+static int voltage_low = 0; -+ - static struct file_operations pcf8563_fops = { -- .owner = THIS_MODULE, -- .ioctl = pcf8563_ioctl, -+ owner: THIS_MODULE, -+ ioctl: pcf8563_ioctl, - }; - - unsigned char --pcf8563_readreg(int reg) -+pcf8563_readreg(int reg) - { -- unsigned char res = i2c_readreg(RTC_I2C_READ, reg); -+ unsigned char res = rtc_read(reg); - -- /* The PCF8563 does not return 0 for unimplemented bits */ -- switch(reg) -- { -+ /* The PCF8563 does not return 0 for unimplemented bits. */ -+ switch (reg) { - case RTC_SECONDS: - case RTC_MINUTES: -- res &= 0x7f; -- break; -+ res &= 0x7F; -+ break; - case RTC_HOURS: - case RTC_DAY_OF_MONTH: -- res &= 0x3f; -- break; -+ res &= 0x3F; -+ break; -+ case RTC_WEEKDAY: -+ res &= 0x07; -+ break; - case RTC_MONTH: -- res = (res & 0x1f) - 1; /* PCF8563 returns month in range 1-12 */ -- break; -+ res &= 0x1F; -+ break; -+ case RTC_CONTROL1: -+ res &= 0xA8; -+ break; -+ case RTC_CONTROL2: -+ res &= 0x1F; -+ break; -+ case RTC_CLOCKOUT_FREQ: -+ case RTC_TIMER_CONTROL: -+ res &= 0x83; -+ break; - } - return res; - } - - void --pcf8563_writereg(int reg, unsigned char val) -+pcf8563_writereg(int reg, unsigned char val) - { --#ifdef CONFIG_ETRAX_RTC_READONLY -- if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR)) -- return; --#endif -- - rtc_write(reg, val); - } - - void - get_rtc_time(struct rtc_time *tm) - { -- tm->tm_sec = rtc_read(RTC_SECONDS); -- tm->tm_min = rtc_read(RTC_MINUTES); -+ tm->tm_sec = rtc_read(RTC_SECONDS); -+ tm->tm_min = rtc_read(RTC_MINUTES); - tm->tm_hour = rtc_read(RTC_HOURS); - tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH); -- tm->tm_mon = rtc_read(RTC_MONTH); -+ tm->tm_wday = rtc_read(RTC_WEEKDAY); -+ tm->tm_mon = rtc_read(RTC_MONTH); - tm->tm_year = rtc_read(RTC_YEAR); - -- if (tm->tm_sec & 0x80) -- printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME); -+ if (tm->tm_sec & 0x80) { -+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " -+ "information is no longer guaranteed!\n", PCF8563_NAME); -+ } - -- tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0); -- tm->tm_sec &= 0x7f; -- tm->tm_min &= 0x7f; -- tm->tm_hour &= 0x3f; -- tm->tm_mday &= 0x3f; -- tm->tm_mon &= 0x1f; -+ tm->tm_year = BCD_TO_BIN(tm->tm_year) + -+ ((tm->tm_mon & 0x80) ? 100 : 0); -+ tm->tm_sec &= 0x7F; -+ tm->tm_min &= 0x7F; -+ tm->tm_hour &= 0x3F; -+ tm->tm_mday &= 0x3F; -+ tm->tm_wday &= 0x07; /* Not coded in BCD. */ -+ tm->tm_mon &= 0x1F; - - BCD_TO_BIN(tm->tm_sec); - BCD_TO_BIN(tm->tm_min); -@@ -126,17 +137,25 @@ - int __init - pcf8563_init(void) - { -- int ret; -+ static int res = 0; -+ static int first = 1; -+ -+ if (!first) { -+ return res; -+ } -+ first = 0; - -- if ((ret = i2c_init())) { -- printk(KERN_CRIT "pcf8563_init: failed to init i2c\n"); -- return ret; -+ /* Initiate the i2c protocol. */ -+ res = i2c_init(); -+ if (res < 0) { -+ printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n"); -+ return res; - } - - /* - * First of all we need to reset the chip. This is done by -- * clearing control1, control2 and clk freq, clear the -- * Voltage Low bit, and resetting all alarms. -+ * clearing control1, control2 and clk freq and resetting -+ * all alarms. - */ - if (rtc_write(RTC_CONTROL1, 0x00) < 0) - goto err; -@@ -147,41 +166,44 @@ - if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0) - goto err; - -- /* Clear the VL bit in the seconds register. */ -- ret = rtc_read(RTC_SECONDS); -- -- if (rtc_write(RTC_SECONDS, (ret & 0x7f)) < 0) -+ if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0) - goto err; -- -+ - /* Reset the alarms. */ -- if (rtc_write(RTC_MINUTE_ALARM, 0x00) < 0) -+ if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0) - goto err; -- -- if (rtc_write(RTC_HOUR_ALARM, 0x00) < 0) -+ -+ if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0) - goto err; -- -- if (rtc_write(RTC_DAY_ALARM, 0x00) < 0) -+ -+ if (rtc_write(RTC_DAY_ALARM, 0x80) < 0) - goto err; -- -- if (rtc_write(RTC_WEEKDAY_ALARM, 0x00) < 0) -+ -+ if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0) - goto err; -- -- /* Check for low voltage, and warn about it.. */ -- if (rtc_read(RTC_SECONDS) & 0x80) -- printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME); -- -- return 0; -+ -+ /* Check for low voltage, and warn about it. */ -+ if (rtc_read(RTC_SECONDS) & 0x80) { -+ voltage_low = 1; -+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable " -+ "date/time information is no longer guaranteed!\n", -+ PCF8563_NAME); -+ } -+ -+ return res; - - err: - printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME); -- return -1; -+ res = -1; -+ return res; - } - - void __exit - pcf8563_exit(void) - { - if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) { -- printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME); -+ printk(KERN_INFO "%s: Unable to unregister device.\n", -+ PCF8563_NAME); - } - } - -@@ -190,7 +212,8 @@ - * POSIX says so! - */ - int --pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) -+pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, -+ unsigned long arg) - { - /* Some sanity checks. */ - if (_IOC_TYPE(cmd) != RTC_MAGIC) -@@ -201,123 +224,151 @@ - - switch (cmd) { - case RTC_RD_TIME: -- { -- struct rtc_time tm; -- -- spin_lock(&rtc_lock); -- get_rtc_time(&tm); -+ { -+ struct rtc_time tm; - -- if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) { -- spin_unlock(&rtc_lock); -- return -EFAULT; -- } -+ spin_lock(&rtc_lock); -+ memset(&tm, 0, sizeof tm); -+ get_rtc_time(&tm); - -+ if (copy_to_user((struct rtc_time *) arg, &tm, -+ sizeof tm)) { - spin_unlock(&rtc_lock); -- return 0; -+ return -EFAULT; - } -- break; -+ -+ spin_unlock(&rtc_lock); -+ -+ return 0; -+ } - case RTC_SET_TIME: -- { --#ifdef CONFIG_ETRAX_RTC_READONLY -+ { -+ int leap; -+ int year; -+ int century; -+ struct rtc_time tm; -+ -+ memset(&tm, 0, sizeof tm); -+ if (!capable(CAP_SYS_TIME)) - return -EPERM; --#else -- int leap; -- int century; -- struct rtc_time tm; -- -- memset(&tm, 0, sizeof (struct rtc_time)); -- if (!capable(CAP_SYS_TIME)) -- return -EPERM; -- -- if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) -- return -EFAULT; -- -- /* Convert from struct tm to struct rtc_time. */ -- tm.tm_year += 1900; -- tm.tm_mon += 1; -- -- leap = ((tm.tm_mon == 2) && ((tm.tm_year % 4) == 0)) ? 1 : 0; -- -- /* Perform some sanity checks. */ -- if ((tm.tm_year < 1970) || -- (tm.tm_mon > 12) || -- (tm.tm_mday == 0) || -- (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || -- (tm.tm_hour >= 24) || -- (tm.tm_min >= 60) || -- (tm.tm_sec >= 60)) -- return -EINVAL; -- -- century = (tm.tm_year >= 2000) ? 0x80 : 0; -- tm.tm_year = tm.tm_year % 100; -- -- BIN_TO_BCD(tm.tm_year); -- BIN_TO_BCD(tm.tm_mday); -- BIN_TO_BCD(tm.tm_hour); -- BIN_TO_BCD(tm.tm_min); -- BIN_TO_BCD(tm.tm_sec); -- tm.tm_mon |= century; -- -- spin_lock(&rtc_lock); -- -- rtc_write(RTC_YEAR, tm.tm_year); -- rtc_write(RTC_MONTH, tm.tm_mon); -- rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); -- rtc_write(RTC_HOURS, tm.tm_hour); -- rtc_write(RTC_MINUTES, tm.tm_min); -- rtc_write(RTC_SECONDS, tm.tm_sec); - -- spin_unlock(&rtc_lock); -+ if (copy_from_user(&tm, (struct rtc_time *) arg, -+ sizeof tm)) { -+ return -EFAULT; -+ } - -- return 0; --#endif /* !CONFIG_ETRAX_RTC_READONLY */ -+ /* Convert from struct tm to struct rtc_time. */ -+ tm.tm_year += 1900; -+ tm.tm_mon += 1; -+ -+ /* -+ * Check if tm.tm_year is a leap year. A year is a leap -+ * year if it is divisible by 4 but not 100, except -+ * that years divisible by 400 _are_ leap years. -+ */ -+ year = tm.tm_year; -+ leap = (tm.tm_mon == 2) && -+ ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); -+ -+ /* Perform some sanity checks. */ -+ if ((tm.tm_year < 1970) || -+ (tm.tm_mon > 12) || -+ (tm.tm_mday == 0) || -+ (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || -+ (tm.tm_wday >= 7) || -+ (tm.tm_hour >= 24) || -+ (tm.tm_min >= 60) || -+ (tm.tm_sec >= 60)) { -+ return -EINVAL; - } - -- case RTC_VLOW_RD: -- { -- int vl_bit = 0; -+ century = (tm.tm_year >= 2000) ? 0x80 : 0; -+ tm.tm_year = tm.tm_year % 100; - -- if (rtc_read(RTC_SECONDS) & 0x80) { -- vl_bit = 1; -- printk(KERN_WARNING "%s: RTC Voltage Low - reliable " -- "date/time information is no longer guaranteed!\n", -- PCF8563_NAME); -- } -- if (copy_to_user((int *) arg, &vl_bit, sizeof(int))) -- return -EFAULT; -+ BIN_TO_BCD(tm.tm_year); -+ BIN_TO_BCD(tm.tm_mon); -+ BIN_TO_BCD(tm.tm_mday); -+ BIN_TO_BCD(tm.tm_hour); -+ BIN_TO_BCD(tm.tm_min); -+ BIN_TO_BCD(tm.tm_sec); -+ tm.tm_mon |= century; -+ -+ spin_lock(&rtc_lock); -+ -+ rtc_write(RTC_YEAR, tm.tm_year); -+ rtc_write(RTC_MONTH, tm.tm_mon); -+ rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ -+ rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); -+ rtc_write(RTC_HOURS, tm.tm_hour); -+ rtc_write(RTC_MINUTES, tm.tm_min); -+ rtc_write(RTC_SECONDS, tm.tm_sec); -+ -+ spin_unlock(&rtc_lock); - - return 0; - } -+ case RTC_VLOW_RD: -+ if (voltage_low) { -+ printk(KERN_WARNING "%s: RTC Voltage Low - " -+ "reliable date/time information is no " -+ "longer guaranteed!\n", PCF8563_NAME); -+ } -+ -+ if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) { -+ return -EFAULT; -+ } -+ -+ return 0; - - case RTC_VLOW_SET: - { -- /* Clear the VL bit in the seconds register */ -+ /* Clear the VL bit in the seconds register in case -+ * the time has not been set already (which would -+ * have cleared it). This does not really matter -+ * because of the cached voltage_low value but do it -+ * anyway for consistency. */ -+ - int ret = rtc_read(RTC_SECONDS); - - rtc_write(RTC_SECONDS, (ret & 0x7F)); - -+ /* Clear the cached value. */ -+ voltage_low = 0; -+ - return 0; - } -- - default: -- return -ENOTTY; -+ return -ENOTTY; - } - - return 0; - } - --static int __init -+static int __init - pcf8563_register(void) - { -- pcf8563_init(); -+ if (pcf8563_init() < 0) { -+ printk(KERN_INFO "%s: Unable to initialize Real-Time Clock " -+ "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); -+ return -1; -+ } -+ - if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { -- printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n", -- PCF8563_NAME, PCF8563_MAJOR); -+ printk(KERN_INFO "%s: Unable to get major numer %d for RTC " -+ "device.\n", PCF8563_NAME, PCF8563_MAJOR); - return -1; - } - -- printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); -- return 0; -+ printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, -+ DRIVER_VERSION); -+ -+ /* Check for low voltage, and warn about it. */ -+ if (voltage_low) { -+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " -+ "information is no longer guaranteed!\n", PCF8563_NAME); -+ } -+ -+ return 0; - } - - module_init(pcf8563_register); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/sync_serial.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/sync_serial.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/sync_serial.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/sync_serial.c 2007-02-05 12:56:34.000000000 +0100 -@@ -0,0 +1,1329 @@ -+/* -+ * Simple synchronous serial port driver for ETRAX 100LX. -+ * -+ * Synchronous serial ports are used for continuous streamed data like audio. -+ * The default setting for this driver is compatible with the STA 013 MP3 -+ * decoder. The driver can easily be tuned to fit other audio encoder/decoders -+ * and SPI -+ * -+ * Copyright (c) 2001-2006 Axis Communications AB -+ * -+ * Author: Mikael Starvik, Johan Adolfsson -+ * -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* The receiver is a bit tricky beacuse of the continuous stream of data.*/ -+/* */ -+/* Three DMA descriptors are linked together. Each DMA descriptor is */ -+/* responsible for port->bufchunk of a common buffer. */ -+/* */ -+/* +---------------------------------------------+ */ -+/* | +----------+ +----------+ +----------+ | */ -+/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */ -+/* +----------+ +----------+ +----------+ */ -+/* | | | */ -+/* v v v */ -+/* +-------------------------------------+ */ -+/* | BUFFER | */ -+/* +-------------------------------------+ */ -+/* |<- data_avail ->| */ -+/* readp writep */ -+/* */ -+/* If the application keeps up the pace readp will be right after writep.*/ -+/* If the application can't keep the pace we have to throw away data. */ -+/* The idea is that readp should be ready with the data pointed out by */ -+/* Descr[i] when the DMA has filled in Descr[i+1]. */ -+/* Otherwise we will discard */ -+/* the rest of the data pointed out by Descr1 and set readp to the start */ -+/* of Descr2 */ -+ -+#define SYNC_SERIAL_MAJOR 125 -+ -+/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */ -+/* words can be handled */ -+#define IN_BUFFER_SIZE 12288 -+#define IN_DESCR_SIZE 256 -+#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) -+#define OUT_BUFFER_SIZE 4096 -+ -+#define DEFAULT_FRAME_RATE 0 -+#define DEFAULT_WORD_RATE 7 -+ -+/* NOTE: Enabling some debug will likely cause overrun or underrun, -+ * especially if manual mode is use. -+ */ -+#define DEBUG(x) -+#define DEBUGREAD(x) -+#define DEBUGWRITE(x) -+#define DEBUGPOLL(x) -+#define DEBUGRXINT(x) -+#define DEBUGTXINT(x) -+ -+/* Define some macros to access ETRAX 100 registers */ -+#define SETF(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \ -+ IO_FIELD_(reg##_, field##_, val) -+#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \ -+ IO_STATE_(reg##_, field##_, _##val) -+ -+typedef struct sync_port -+{ -+ /* Etrax registers and bits*/ -+ const volatile unsigned * const status; -+ volatile unsigned * const ctrl_data; -+ volatile unsigned * const output_dma_first; -+ volatile unsigned char * const output_dma_cmd; -+ volatile unsigned char * const output_dma_clr_irq; -+ volatile unsigned * const input_dma_first; -+ volatile unsigned char * const input_dma_cmd; -+ volatile unsigned * const input_dma_descr; -+ /* 8*4 */ -+ volatile unsigned char * const input_dma_clr_irq; -+ volatile unsigned * const data_out; -+ const volatile unsigned * const data_in; -+ char data_avail_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ -+ char transmitter_ready_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ -+ char input_dma_descr_bit; /* In R_IRQ_MASK2_RD */ -+ -+ char output_dma_bit; /* In R_IRQ_MASK2_RD */ -+ /* End of fields initialised in array */ -+ char started; /* 1 if port has been started */ -+ char port_nbr; /* Port 0 or 1 */ -+ char busy; /* 1 if port is busy */ -+ -+ char enabled; /* 1 if port is enabled */ -+ char use_dma; /* 1 if port uses dma */ -+ char tr_running; -+ -+ char init_irqs; -+ -+ unsigned int ctrl_data_shadow; /* Register shadow */ -+ volatile unsigned int out_count; /* Remaining bytes for current transfer */ -+ unsigned char* outp; /* Current position in out_buffer */ -+ /* 16*4 */ -+ volatile unsigned char* volatile readp; /* Next byte to be read by application */ -+ volatile unsigned char* volatile writep; /* Next byte to be written by etrax */ -+ unsigned int in_buffer_size; -+ unsigned int inbufchunk; -+ struct etrax_dma_descr out_descr __attribute__ ((aligned(32))); -+ struct etrax_dma_descr in_descr[NUM_IN_DESCR] __attribute__ ((aligned(32))); -+ unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32))); -+ unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32))); -+ unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32))); -+ struct etrax_dma_descr* next_rx_desc; -+ struct etrax_dma_descr* prev_rx_desc; -+ int full; -+ -+ wait_queue_head_t out_wait_q; -+ wait_queue_head_t in_wait_q; -+} sync_port; -+ -+ -+static int etrax_sync_serial_init(void); -+static void initialize_port(int portnbr); -+static inline int sync_data_avail(struct sync_port *port); -+ -+static int sync_serial_open(struct inode *, struct file*); -+static int sync_serial_release(struct inode*, struct file*); -+static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); -+ -+static int sync_serial_ioctl(struct inode*, struct file*, -+ unsigned int cmd, unsigned long arg); -+static ssize_t sync_serial_write(struct file * file, const char * buf, -+ size_t count, loff_t *ppos); -+static ssize_t sync_serial_read(struct file *file, char *buf, -+ size_t count, loff_t *ppos); -+ -+#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ -+ defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ -+ (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ -+ defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) -+#define SYNC_SER_DMA -+#endif -+ -+static void send_word(sync_port* port); -+static void start_dma(struct sync_port *port, const char* data, int count); -+static void start_dma_in(sync_port* port); -+#ifdef SYNC_SER_DMA -+static irqreturn_t tr_interrupt(int irq, void *dev_id); -+static irqreturn_t rx_interrupt(int irq, void *dev_id); -+#endif -+#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ -+ !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ -+ (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ -+ !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) -+#define SYNC_SER_MANUAL -+#endif -+#ifdef SYNC_SER_MANUAL -+static irqreturn_t manual_interrupt(int irq, void *dev_id); -+#endif -+ -+/* The ports */ -+static struct sync_port ports[]= -+{ -+ { -+ .status = R_SYNC_SERIAL1_STATUS, -+ .ctrl_data = R_SYNC_SERIAL1_CTRL, -+ .output_dma_first = R_DMA_CH8_FIRST, -+ .output_dma_cmd = R_DMA_CH8_CMD, -+ .output_dma_clr_irq = R_DMA_CH8_CLR_INTR, -+ .input_dma_first = R_DMA_CH9_FIRST, -+ .input_dma_cmd = R_DMA_CH9_CMD, -+ .input_dma_descr = R_DMA_CH9_DESCR, -+ .input_dma_clr_irq = R_DMA_CH9_CLR_INTR, -+ .data_out = R_SYNC_SERIAL1_TR_DATA, -+ .data_in = R_SYNC_SERIAL1_REC_DATA, -+ .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_data), -+ .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_ready), -+ .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma9_descr), -+ .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma8_eop), -+ .init_irqs = 1, -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) -+ .use_dma = 1, -+#else -+ .use_dma = 0, -+#endif -+ }, -+ { -+ .status = R_SYNC_SERIAL3_STATUS, -+ .ctrl_data = R_SYNC_SERIAL3_CTRL, -+ .output_dma_first = R_DMA_CH4_FIRST, -+ .output_dma_cmd = R_DMA_CH4_CMD, -+ .output_dma_clr_irq = R_DMA_CH4_CLR_INTR, -+ .input_dma_first = R_DMA_CH5_FIRST, -+ .input_dma_cmd = R_DMA_CH5_CMD, -+ .input_dma_descr = R_DMA_CH5_DESCR, -+ .input_dma_clr_irq = R_DMA_CH5_CLR_INTR, -+ .data_out = R_SYNC_SERIAL3_TR_DATA, -+ .data_in = R_SYNC_SERIAL3_REC_DATA, -+ .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_data), -+ .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_ready), -+ .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma5_descr), -+ .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma4_eop), -+ .init_irqs = 1, -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) -+ .use_dma = 1, -+#else -+ .use_dma = 0, -+#endif -+ } -+}; -+ -+/* Register shadows */ -+static unsigned sync_serial_prescale_shadow = 0; -+ -+#define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port)) -+ -+static struct file_operations sync_serial_fops = { -+ .owner = THIS_MODULE, -+ .write = sync_serial_write, -+ .read = sync_serial_read, -+ .poll = sync_serial_poll, -+ .ioctl = sync_serial_ioctl, -+ .open = sync_serial_open, -+ .release = sync_serial_release -+}; -+ -+static int __init etrax_sync_serial_init(void) -+{ -+ ports[0].enabled = 0; -+ ports[1].enabled = 0; -+ -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) -+ if (cris_request_io_interface(if_sync_serial_1, "sync_ser1")) { -+ printk(KERN_CRIT "ETRAX100LX sync_serial: Could not allocate IO group for port %d\n", 0); -+ return -EBUSY; -+ } -+#endif -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) -+ if (cris_request_io_interface(if_sync_serial_3, "sync_ser3")) { -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) -+ cris_free_io_interface(if_sync_serial_1); -+#endif -+ printk(KERN_CRIT "ETRAX100LX sync_serial: Could not allocate IO group for port %d\n", 1); -+ return -EBUSY; -+ } -+#endif -+ -+ if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 ) -+ { -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) -+ cris_free_io_interface(if_sync_serial_3); -+#endif -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) -+ cris_free_io_interface(if_sync_serial_1); -+#endif -+ printk("unable to get major for synchronous serial port\n"); -+ return -EBUSY; -+ } -+ -+ /* Deselect synchronous serial ports while configuring. */ -+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); -+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); -+ *R_GEN_CONFIG_II = gen_config_ii_shadow; -+ -+ /* Initialize Ports */ -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) -+ ports[0].enabled = 1; -+ SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser1, ss1extra); -+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) -+ ports[0].use_dma = 1; -+#else -+ ports[0].use_dma = 0; -+#endif -+ initialize_port(0); -+#endif -+ -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) -+ ports[1].enabled = 1; -+ SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser3, ss3extra); -+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); -+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) -+ ports[1].use_dma = 1; -+#else -+ ports[1].use_dma = 0; -+#endif -+ initialize_port(1); -+#endif -+ -+ *R_PORT_PB_I2C = port_pb_i2c_shadow; /* Use PB4/PB7 */ -+ -+ /* Set up timing */ -+ *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow = ( -+ IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec) | -+ IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u1, external) | -+ IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec) | -+ IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u3, external) | -+ IO_STATE(R_SYNC_SERIAL_PRESCALE, prescaler, div4) | -+ IO_FIELD(R_SYNC_SERIAL_PRESCALE, frame_rate, DEFAULT_FRAME_RATE) | -+ IO_FIELD(R_SYNC_SERIAL_PRESCALE, word_rate, DEFAULT_WORD_RATE) | -+ IO_STATE(R_SYNC_SERIAL_PRESCALE, warp_mode, normal)); -+ -+ /* Select synchronous ports */ -+ *R_GEN_CONFIG_II = gen_config_ii_shadow; -+ -+ printk("ETRAX 100LX synchronous serial port driver\n"); -+ return 0; -+} -+ -+static void __init initialize_port(int portnbr) -+{ -+ struct sync_port* port = &ports[portnbr]; -+ -+ DEBUG(printk("Init sync serial port %d\n", portnbr)); -+ -+ port->started = 0; -+ port->port_nbr = portnbr; -+ port->busy = 0; -+ port->tr_running = 0; -+ -+ port->out_count = 0; -+ port->outp = port->out_buffer; -+ -+ port->readp = port->flip; -+ port->writep = port->flip; -+ port->in_buffer_size = IN_BUFFER_SIZE; -+ port->inbufchunk = IN_DESCR_SIZE; -+ port->next_rx_desc = &port->in_descr[0]; -+ port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1]; -+ port->prev_rx_desc->ctrl = d_eol; -+ -+ init_waitqueue_head(&port->out_wait_q); -+ init_waitqueue_head(&port->in_wait_q); -+ -+ port->ctrl_data_shadow = -+ IO_STATE(R_SYNC_SERIAL1_CTRL, tr_baud, c115k2Hz) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, mode, master_output) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, error, ignore) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, rec_enable, disable) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, f_synctype, normal) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, f_syncsize, word) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, f_sync, on) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_mode, normal) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_halt, stopped) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, bitorder, msb) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, tr_enable, disable) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, buf_empty, lmt_8) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, buf_full, lmt_8) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_polarity, neg) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, frame_polarity, normal)| -+ IO_STATE(R_SYNC_SERIAL1_CTRL, status_polarity, inverted)| -+ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_driver, normal) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, frame_driver, normal) | -+ IO_STATE(R_SYNC_SERIAL1_CTRL, status_driver, normal)| -+ IO_STATE(R_SYNC_SERIAL1_CTRL, def_out0, high); -+ -+ if (port->use_dma) -+ port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, dma_enable, on); -+ else -+ port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, dma_enable, off); -+ -+ *port->ctrl_data = port->ctrl_data_shadow; -+} -+ -+static inline int sync_data_avail(struct sync_port *port) -+{ -+ int avail; -+ unsigned char *start; -+ unsigned char *end; -+ -+ start = (unsigned char*)port->readp; /* cast away volatile */ -+ end = (unsigned char*)port->writep; /* cast away volatile */ -+ /* 0123456789 0123456789 -+ * ----- - ----- -+ * ^rp ^wp ^wp ^rp -+ */ -+ -+ if (end >= start) -+ avail = end - start; -+ else -+ avail = port->in_buffer_size - (start - end); -+ return avail; -+} -+ -+static inline int sync_data_avail_to_end(struct sync_port *port) -+{ -+ int avail; -+ unsigned char *start; -+ unsigned char *end; -+ -+ start = (unsigned char*)port->readp; /* cast away volatile */ -+ end = (unsigned char*)port->writep; /* cast away volatile */ -+ /* 0123456789 0123456789 -+ * ----- ----- -+ * ^rp ^wp ^wp ^rp -+ */ -+ -+ if (end >= start) -+ avail = end - start; -+ else -+ avail = port->flip + port->in_buffer_size - start; -+ return avail; -+} -+ -+ -+static int sync_serial_open(struct inode *inode, struct file *file) -+{ -+ int dev = MINOR(inode->i_rdev); -+ sync_port* port; -+ int mode; -+ -+ DEBUG(printk("Open sync serial port %d\n", dev)); -+ -+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) -+ { -+ DEBUG(printk("Invalid minor %d\n", dev)); -+ return -ENODEV; -+ } -+ port = &ports[dev]; -+ /* Allow open this device twice (assuming one reader and one writer) */ -+ if (port->busy == 2) -+ { -+ DEBUG(printk("Device is busy.. \n")); -+ return -EBUSY; -+ } -+ if (port->init_irqs) { -+ if (port->use_dma) { -+ if (port == &ports[0]){ -+#ifdef SYNC_SER_DMA -+ if(request_irq(24, -+ tr_interrupt, -+ 0, -+ "synchronous serial 1 dma tr", -+ &ports[0])) { -+ printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ"); -+ return -EBUSY; -+ } else if(request_irq(25, -+ rx_interrupt, -+ 0, -+ "synchronous serial 1 dma rx", -+ &ports[0])) { -+ free_irq(24, &port[0]); -+ printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ"); -+ return -EBUSY; -+ } else if (cris_request_dma(8, -+ "synchronous serial 1 dma tr", -+ DMA_VERBOSE_ON_ERROR, -+ dma_ser1)) { -+ free_irq(24, &port[0]); -+ free_irq(25, &port[0]); -+ printk(KERN_CRIT "Can't allocate sync serial port 1 TX DMA channel"); -+ return -EBUSY; -+ } else if (cris_request_dma(9, -+ "synchronous serial 1 dma rec", -+ DMA_VERBOSE_ON_ERROR, -+ dma_ser1)) { -+ cris_free_dma(8, NULL); -+ free_irq(24, &port[0]); -+ free_irq(25, &port[0]); -+ printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel"); -+ return -EBUSY; -+ } -+#endif -+ RESET_DMA(8); WAIT_DMA(8); -+ RESET_DMA(9); WAIT_DMA(9); -+ *R_DMA_CH8_CLR_INTR = IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) | -+ IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do); -+ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do) | -+ IO_STATE(R_DMA_CH9_CLR_INTR, clr_descr, do); -+ *R_IRQ_MASK2_SET = -+ IO_STATE(R_IRQ_MASK2_SET, dma8_eop, set) | -+ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); -+ } -+ else if (port == &ports[1]){ -+#ifdef SYNC_SER_DMA -+ if (request_irq(20, -+ tr_interrupt, -+ 0, -+ "synchronous serial 3 dma tr", -+ &ports[1])) { -+ printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); -+ return -EBUSY; -+ } else if (request_irq(21, -+ rx_interrupt, -+ 0, -+ "synchronous serial 3 dma rx", -+ &ports[1])) { -+ free_irq(20, &ports[1]); -+ printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); -+ return -EBUSY; -+ } else if (cris_request_dma(4, -+ "synchronous serial 3 dma tr", -+ DMA_VERBOSE_ON_ERROR, -+ dma_ser3)) { -+ free_irq(21, &ports[1]); -+ free_irq(20, &ports[1]); -+ printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); -+ return -EBUSY; -+ } else if (cris_request_dma(5, -+ "synchronous serial 3 dma rec", -+ DMA_VERBOSE_ON_ERROR, -+ dma_ser3)) { -+ cris_free_dma(4, NULL); -+ free_irq(21, &ports[1]); -+ free_irq(20, &ports[1]); -+ printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel"); -+ return -EBUSY; -+ } -+#endif -+ RESET_DMA(4); WAIT_DMA(4); -+ RESET_DMA(5); WAIT_DMA(5); -+ *R_DMA_CH4_CLR_INTR = IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) | -+ IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do); -+ *R_DMA_CH5_CLR_INTR = IO_STATE(R_DMA_CH5_CLR_INTR, clr_eop, do) | -+ IO_STATE(R_DMA_CH5_CLR_INTR, clr_descr, do); -+ *R_IRQ_MASK2_SET = -+ IO_STATE(R_IRQ_MASK2_SET, dma4_eop, set) | -+ IO_STATE(R_IRQ_MASK2_SET, dma5_descr, set); -+ } -+ start_dma_in(port); -+ port->init_irqs = 0; -+ } else { /* !port->use_dma */ -+#ifdef SYNC_SER_MANUAL -+ if (port == &ports[0]) { -+ if (request_irq(8, -+ manual_interrupt, -+ IRQF_SHARED | IRQF_DISABLED, -+ "synchronous serial manual irq", -+ &ports[0])) { -+ printk("Can't allocate sync serial manual irq"); -+ return -EBUSY; -+ } -+ } else if (port == &ports[1]) { -+ if (request_irq(8, -+ manual_interrupt, -+ IRQF_SHARED | IRQF_DISABLED, -+ "synchronous serial manual irq", -+ &ports[1])) { -+ printk(KERN_CRIT "Can't allocate sync serial manual irq"); -+ return -EBUSY; -+ } -+ } -+ port->init_irqs = 0; -+#else -+ panic("sync_serial: Manual mode not supported.\n"); -+#endif /* SYNC_SER_MANUAL */ -+ } -+ } /* port->init_irqs */ -+ -+ port->busy++; -+ /* Start port if we use it as input */ -+ mode = IO_EXTRACT(R_SYNC_SERIAL1_CTRL, mode, port->ctrl_data_shadow); -+ if (mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_input) || -+ mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_input) || -+ mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_bidir) || -+ mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_bidir)) { -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, running); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, enable); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, enable); -+ port->started = 1; -+ *port->ctrl_data = port->ctrl_data_shadow; -+ if (!port->use_dma) -+ *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; -+ DEBUG(printk("sser%d rec started\n", dev)); -+ } -+ return 0; -+} -+ -+static int sync_serial_release(struct inode *inode, struct file *file) -+{ -+ int dev = MINOR(inode->i_rdev); -+ sync_port* port; -+ -+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) -+ { -+ DEBUG(printk("Invalid minor %d\n", dev)); -+ return -ENODEV; -+ } -+ port = &ports[dev]; -+ if (port->busy) -+ port->busy--; -+ if (!port->busy) -+ *R_IRQ_MASK1_CLR = ((1 << port->data_avail_bit) | -+ (1 << port->transmitter_ready_bit)); -+ -+ return 0; -+} -+ -+ -+ -+static unsigned int sync_serial_poll(struct file *file, poll_table *wait) -+{ -+ int dev = MINOR(file->f_dentry->d_inode->i_rdev); -+ unsigned int mask = 0; -+ sync_port* port; -+ DEBUGPOLL( static unsigned int prev_mask = 0; ); -+ -+ port = &ports[dev]; -+ poll_wait(file, &port->out_wait_q, wait); -+ poll_wait(file, &port->in_wait_q, wait); -+ /* Some room to write */ -+ if (port->out_count < OUT_BUFFER_SIZE) -+ mask |= POLLOUT | POLLWRNORM; -+ /* At least an inbufchunk of data */ -+ if (sync_data_avail(port) >= port->inbufchunk) -+ mask |= POLLIN | POLLRDNORM; -+ -+ DEBUGPOLL(if (mask != prev_mask) -+ printk("sync_serial_poll: mask 0x%08X %s %s\n", mask, -+ mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":""); -+ prev_mask = mask; -+ ); -+ return mask; -+} -+ -+static int sync_serial_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ int return_val = 0; -+ unsigned long flags; -+ -+ int dev = MINOR(file->f_dentry->d_inode->i_rdev); -+ sync_port* port; -+ -+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) -+ { -+ DEBUG(printk("Invalid minor %d\n", dev)); -+ return -1; -+ } -+ port = &ports[dev]; -+ -+ local_irq_save(flags); -+ /* Disable port while changing config */ -+ if (dev) -+ { -+ if (port->use_dma) { -+ RESET_DMA(4); WAIT_DMA(4); -+ port->tr_running = 0; -+ port->out_count = 0; -+ port->outp = port->out_buffer; -+ *R_DMA_CH4_CLR_INTR = IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) | -+ IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do); -+ } -+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); -+ } -+ else -+ { -+ if (port->use_dma) { -+ RESET_DMA(8); WAIT_DMA(8); -+ port->tr_running = 0; -+ port->out_count = 0; -+ port->outp = port->out_buffer; -+ *R_DMA_CH8_CLR_INTR = IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) | -+ IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do); -+ } -+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); -+ } -+ *R_GEN_CONFIG_II = gen_config_ii_shadow; -+ local_irq_restore(flags); -+ -+ switch(cmd) -+ { -+ case SSP_SPEED: -+ if (GET_SPEED(arg) == CODEC) -+ { -+ if (dev) -+ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec); -+ else -+ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec); -+ -+ SETF(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, prescaler, GET_FREQ(arg)); -+ SETF(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, frame_rate, GET_FRAME_RATE(arg)); -+ SETF(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, word_rate, GET_WORD_RATE(arg)); -+ } -+ else -+ { -+ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_baud, GET_SPEED(arg)); -+ if (dev) -+ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u3, baudrate); -+ else -+ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u1, baudrate); -+ } -+ break; -+ case SSP_MODE: -+ if (arg > 5) -+ return -EINVAL; -+ if (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT) -+ *R_IRQ_MASK1_CLR = 1 << port->data_avail_bit; -+ else if (!port->use_dma) -+ *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; -+ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, arg); -+ break; -+ case SSP_FRAME_SYNC: -+ if (arg & NORMAL_SYNC) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, normal); -+ else if (arg & EARLY_SYNC) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, early); -+ -+ if (arg & BIT_SYNC) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, bit); -+ else if (arg & WORD_SYNC) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, word); -+ else if (arg & EXTENDED_SYNC) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, extended); -+ -+ if (arg & SYNC_ON) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on); -+ else if (arg & SYNC_OFF) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, off); -+ -+ if (arg & WORD_SIZE_8) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size8bit); -+ else if (arg & WORD_SIZE_12) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size12bit); -+ else if (arg & WORD_SIZE_16) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size16bit); -+ else if (arg & WORD_SIZE_24) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size24bit); -+ else if (arg & WORD_SIZE_32) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size32bit); -+ -+ if (arg & BIT_ORDER_MSB) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, msb); -+ else if (arg & BIT_ORDER_LSB) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, lsb); -+ -+ if (arg & FLOW_CONTROL_ENABLE) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled); -+ else if (arg & FLOW_CONTROL_DISABLE) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, disabled); -+ -+ if (arg & CLOCK_NOT_GATED) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_mode, normal); -+ else if (arg & CLOCK_GATED) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_mode, gated); -+ -+ break; -+ case SSP_IPOLARITY: -+ /* NOTE!! negedge is considered NORMAL */ -+ if (arg & CLOCK_NORMAL) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_polarity, neg); -+ else if (arg & CLOCK_INVERT) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_polarity, pos); -+ -+ if (arg & FRAME_NORMAL) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_polarity, normal); -+ else if (arg & FRAME_INVERT) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_polarity, inverted); -+ -+ if (arg & STATUS_NORMAL) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_polarity, normal); -+ else if (arg & STATUS_INVERT) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_polarity, inverted); -+ break; -+ case SSP_OPOLARITY: -+ if (arg & CLOCK_NORMAL) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_driver, normal); -+ else if (arg & CLOCK_INVERT) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_driver, inverted); -+ -+ if (arg & FRAME_NORMAL) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_driver, normal); -+ else if (arg & FRAME_INVERT) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_driver, inverted); -+ -+ if (arg & STATUS_NORMAL) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_driver, normal); -+ else if (arg & STATUS_INVERT) -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_driver, inverted); -+ break; -+ case SSP_SPI: -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, disabled); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, msb); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size8bit); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, word); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, normal); -+ if (arg & SPI_SLAVE) -+ { -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_polarity, inverted); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_polarity, neg); -+ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, SLAVE_INPUT); -+ } -+ else -+ { -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_driver, inverted); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_driver, inverted); -+ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, MASTER_OUTPUT); -+ } -+ break; -+ case SSP_INBUFCHUNK: -+#if 0 -+ if (arg > port->in_buffer_size/NUM_IN_DESCR) -+ return -EINVAL; -+ port->inbufchunk = arg; -+ /* Make sure in_buffer_size is a multiple of inbufchunk */ -+ port->in_buffer_size = (port->in_buffer_size/port->inbufchunk) * port->inbufchunk; -+ DEBUG(printk("inbufchunk %i in_buffer_size: %i\n", port->inbufchunk, port->in_buffer_size)); -+ if (port->use_dma) { -+ if (port->port_nbr == 0) { -+ RESET_DMA(9); -+ WAIT_DMA(9); -+ } else { -+ RESET_DMA(5); -+ WAIT_DMA(5); -+ } -+ start_dma_in(port); -+ } -+#endif -+ break; -+ default: -+ return_val = -1; -+ } -+ /* Make sure we write the config without interruption */ -+ local_irq_save(flags); -+ /* Set config and enable port */ -+ *port->ctrl_data = port->ctrl_data_shadow; -+ nop(); nop(); nop(); nop(); -+ *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow; -+ nop(); nop(); nop(); nop(); -+ if (dev) -+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); -+ else -+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); -+ -+ *R_GEN_CONFIG_II = gen_config_ii_shadow; -+ /* Reset DMA. At readout from serial port the data could be shifted -+ * one byte if not resetting DMA. -+ */ -+ if (port->use_dma) { -+ if (port->port_nbr == 0) { -+ RESET_DMA(9); -+ WAIT_DMA(9); -+ } else { -+ RESET_DMA(5); -+ WAIT_DMA(5); -+ } -+ start_dma_in(port); -+ } -+ local_irq_restore(flags); -+ return return_val; -+} -+ -+ -+static ssize_t sync_serial_write(struct file * file, const char * buf, -+ size_t count, loff_t *ppos) -+{ -+ int dev = MINOR(file->f_dentry->d_inode->i_rdev); -+ DECLARE_WAITQUEUE(wait, current); -+ sync_port *port; -+ unsigned long flags; -+ unsigned long c, c1; -+ unsigned long free_outp; -+ unsigned long outp; -+ unsigned long out_buffer; -+ -+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) -+ { -+ DEBUG(printk("Invalid minor %d\n", dev)); -+ return -ENODEV; -+ } -+ port = &ports[dev]; -+ -+ DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE)); -+ /* Space to end of buffer */ -+ /* -+ * out_buffer 012345<- c ->OUT_BUFFER_SIZE -+ * outp^ +out_count -+ ^free_outp -+ * out_buffer 45<- c ->0123OUT_BUFFER_SIZE -+ * +out_count outp^ -+ * free_outp -+ * -+ */ -+ -+ /* Read variables that may be updated by interrupts */ -+ local_irq_save(flags); -+ count = count > OUT_BUFFER_SIZE - port->out_count ? OUT_BUFFER_SIZE - port->out_count : count; -+ outp = (unsigned long)port->outp; -+ free_outp = outp + port->out_count; -+ local_irq_restore(flags); -+ out_buffer = (unsigned long)port->out_buffer; -+ -+ /* Find out where and how much to write */ -+ if (free_outp >= out_buffer + OUT_BUFFER_SIZE) -+ free_outp -= OUT_BUFFER_SIZE; -+ if (free_outp >= outp) -+ c = out_buffer + OUT_BUFFER_SIZE - free_outp; -+ else -+ c = outp - free_outp; -+ if (c > count) -+ c = count; -+ -+// DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c)); -+ if (copy_from_user((void*)free_outp, buf, c)) -+ return -EFAULT; -+ -+ if (c != count) { -+ buf += c; -+ c1 = count - c; -+ DEBUGWRITE(printk("w2 fi %lu c %lu c1 %lu\n", free_outp-out_buffer, c, c1)); -+ if (copy_from_user((void*)out_buffer, buf, c1)) -+ return -EFAULT; -+ } -+ local_irq_save(flags); -+ port->out_count += count; -+ local_irq_restore(flags); -+ -+ /* Make sure transmitter/receiver is running */ -+ if (!port->started) -+ { -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, running); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, enable); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, enable); -+ port->started = 1; -+ } -+ -+ *port->ctrl_data = port->ctrl_data_shadow; -+ -+ if (file->f_flags & O_NONBLOCK) { -+ local_irq_save(flags); -+ if (!port->tr_running) { -+ if (!port->use_dma) { -+ /* Start sender by writing data */ -+ send_word(port); -+ /* and enable transmitter ready IRQ */ -+ *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit; -+ } else { -+ start_dma(port, (unsigned char* volatile )port->outp, c); -+ } -+ } -+ local_irq_restore(flags); -+ DEBUGWRITE(printk("w d%d c %lu NB\n", -+ port->port_nbr, count)); -+ return count; -+ } -+ -+ /* Sleep until all sent */ -+ -+ add_wait_queue(&port->out_wait_q, &wait); -+ set_current_state(TASK_INTERRUPTIBLE); -+ local_irq_save(flags); -+ if (!port->tr_running) { -+ if (!port->use_dma) { -+ /* Start sender by writing data */ -+ send_word(port); -+ /* and enable transmitter ready IRQ */ -+ *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit; -+ } else { -+ start_dma(port, port->outp, c); -+ } -+ } -+ local_irq_restore(flags); -+ schedule(); -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&port->out_wait_q, &wait); -+ if (signal_pending(current)) -+ { -+ return -EINTR; -+ } -+ DEBUGWRITE(printk("w d%d c %lu\n", port->port_nbr, count)); -+ return count; -+} -+ -+static ssize_t sync_serial_read(struct file * file, char * buf, -+ size_t count, loff_t *ppos) -+{ -+ int dev = MINOR(file->f_dentry->d_inode->i_rdev); -+ int avail; -+ sync_port *port; -+ unsigned char* start; -+ unsigned char* end; -+ unsigned long flags; -+ -+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) -+ { -+ DEBUG(printk("Invalid minor %d\n", dev)); -+ return -ENODEV; -+ } -+ port = &ports[dev]; -+ -+ DEBUGREAD(printk("R%d c %d ri %lu wi %lu /%lu\n", dev, count, port->readp - port->flip, port->writep - port->flip, port->in_buffer_size)); -+ -+ if (!port->started) -+ { -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, running); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, enable); -+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, enable); -+ port->started = 1; -+ } -+ *port->ctrl_data = port->ctrl_data_shadow; -+ -+ -+ /* Calculate number of available bytes */ -+ /* Save pointers to avoid that they are modified by interrupt */ -+ local_irq_save(flags); -+ start = (unsigned char*)port->readp; /* cast away volatile */ -+ end = (unsigned char*)port->writep; /* cast away volatile */ -+ local_irq_restore(flags); -+ while ((start == end) && !port->full) /* No data */ -+ { -+ if (file->f_flags & O_NONBLOCK) -+ { -+ return -EAGAIN; -+ } -+ -+ interruptible_sleep_on(&port->in_wait_q); -+ if (signal_pending(current)) -+ { -+ return -EINTR; -+ } -+ local_irq_save(flags); -+ start = (unsigned char*)port->readp; /* cast away volatile */ -+ end = (unsigned char*)port->writep; /* cast away volatile */ -+ local_irq_restore(flags); -+ } -+ -+ /* Lazy read, never return wrapped data. */ -+ if (port->full) -+ avail = port->in_buffer_size; -+ else if (end > start) -+ avail = end - start; -+ else -+ avail = port->flip + port->in_buffer_size - start; -+ -+ count = count > avail ? avail : count; -+ if (copy_to_user(buf, start, count)) -+ return -EFAULT; -+ /* Disable interrupts while updating readp */ -+ local_irq_save(flags); -+ port->readp += count; -+ if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ -+ port->readp = port->flip; -+ port->full = 0; -+ local_irq_restore(flags); -+ DEBUGREAD(printk("r %d\n", count)); -+ return count; -+} -+ -+static void send_word(sync_port* port) -+{ -+ switch(IO_EXTRACT(R_SYNC_SERIAL1_CTRL, wordsize, port->ctrl_data_shadow)) -+ { -+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): -+ port->out_count--; -+ *port->data_out = *port->outp++; -+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) -+ port->outp = port->out_buffer; -+ break; -+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): -+ { -+ int data = (*port->outp++) << 8; -+ data |= *port->outp++; -+ port->out_count-=2; -+ *port->data_out = data; -+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) -+ port->outp = port->out_buffer; -+ } -+ break; -+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): -+ port->out_count-=2; -+ *port->data_out = *(unsigned short *)port->outp; -+ port->outp+=2; -+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) -+ port->outp = port->out_buffer; -+ break; -+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): -+ port->out_count-=3; -+ *port->data_out = *(unsigned int *)port->outp; -+ port->outp+=3; -+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) -+ port->outp = port->out_buffer; -+ break; -+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): -+ port->out_count-=4; -+ *port->data_out = *(unsigned int *)port->outp; -+ port->outp+=4; -+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) -+ port->outp = port->out_buffer; -+ break; -+ } -+} -+ -+ -+static void start_dma(struct sync_port* port, const char* data, int count) -+{ -+ port->tr_running = 1; -+ port->out_descr.hw_len = 0; -+ port->out_descr.next = 0; -+ port->out_descr.ctrl = d_eol | d_eop; /* No d_wait to avoid glitches */ -+ port->out_descr.sw_len = count; -+ port->out_descr.buf = virt_to_phys((char*)data); -+ port->out_descr.status = 0; -+ -+ *port->output_dma_first = virt_to_phys(&port->out_descr); -+ *port->output_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); -+ DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count)); -+} -+ -+static void start_dma_in(sync_port* port) -+{ -+ int i; -+ unsigned long buf; -+ port->writep = port->flip; -+ -+ if (port->writep > port->flip + port->in_buffer_size) -+ { -+ panic("Offset too large in sync serial driver\n"); -+ return; -+ } -+ buf = virt_to_phys(port->in_buffer); -+ for (i = 0; i < NUM_IN_DESCR; i++) { -+ port->in_descr[i].sw_len = port->inbufchunk; -+ port->in_descr[i].ctrl = d_int; -+ port->in_descr[i].next = virt_to_phys(&port->in_descr[i+1]); -+ port->in_descr[i].buf = buf; -+ port->in_descr[i].hw_len = 0; -+ port->in_descr[i].status = 0; -+ port->in_descr[i].fifo_len = 0; -+ buf += port->inbufchunk; -+ prepare_rx_descriptor(&port->in_descr[i]); -+ } -+ /* Link the last descriptor to the first */ -+ port->in_descr[i-1].next = virt_to_phys(&port->in_descr[0]); -+ port->in_descr[i-1].ctrl |= d_eol; -+ port->next_rx_desc = &port->in_descr[0]; -+ port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1]; -+ *port->input_dma_first = virt_to_phys(port->next_rx_desc); -+ *port->input_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); -+} -+ -+#ifdef SYNC_SER_DMA -+static irqreturn_t tr_interrupt(int irq, void *dev_id) -+{ -+ unsigned long ireg = *R_IRQ_MASK2_RD; -+ int i; -+ struct etrax_dma_descr *descr; -+ unsigned int sentl; -+ int handled = 0; -+ -+ for (i = 0; i < NUMBER_OF_PORTS; i++) -+ { -+ sync_port *port = &ports[i]; -+ if (!port->enabled || !port->use_dma ) -+ continue; -+ -+ if (ireg & (1 << port->output_dma_bit)) /* IRQ active for the port? */ -+ { -+ handled = 1; -+ -+ /* Clear IRQ */ -+ *port->output_dma_clr_irq = -+ IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do) | -+ IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do); -+ -+ descr = &port->out_descr; -+ if (!(descr->status & d_stop)) { -+ sentl = descr->sw_len; -+ } else -+ /* otherwise we find the amount of data sent here */ -+ sentl = descr->hw_len; -+ port->out_count -= sentl; -+ port->outp += sentl; -+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) -+ port->outp = port->out_buffer; -+ if (port->out_count) { -+ int c; -+ c = port->out_buffer + OUT_BUFFER_SIZE - port->outp; -+ if (c > port->out_count) -+ c = port->out_count; -+ DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c)); -+ start_dma(port, port->outp, c); -+ } else { -+ DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl)); -+ port->tr_running = 0; -+ } -+ wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */ -+ } -+ } -+ return IRQ_RETVAL(handled); -+} /* tr_interrupt */ -+ -+static irqreturn_t rx_interrupt(int irq, void *dev_id) -+{ -+ unsigned long ireg = *R_IRQ_MASK2_RD; -+ int i; -+ int handled = 0; -+ -+ for (i = 0; i < NUMBER_OF_PORTS; i++) -+ { -+ sync_port *port = &ports[i]; -+ -+ if (!port->enabled || !port->use_dma ) -+ continue; -+ -+ if (ireg & (1 << port->input_dma_descr_bit)) /* Descriptor interrupt */ -+ { -+ handled = 1; -+ while (*port->input_dma_descr != virt_to_phys(port->next_rx_desc)) { -+ -+ if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) { -+ int first_size = port->flip + port->in_buffer_size - port->writep; -+ memcpy(port->writep, phys_to_virt(port->next_rx_desc->buf), first_size); -+ memcpy(port->flip, phys_to_virt(port->next_rx_desc->buf+first_size), port->inbufchunk - first_size); -+ port->writep = port->flip + port->inbufchunk - first_size; -+ } else { -+ memcpy(port->writep, phys_to_virt(port->next_rx_desc->buf), port->inbufchunk); -+ port->writep += port->inbufchunk; -+ if (port->writep >= port->flip + port->in_buffer_size) -+ port->writep = port->flip; -+ } -+ if (port->writep == port->readp) -+ { -+ port->full = 1; -+ } -+ -+ prepare_rx_descriptor(port->next_rx_desc); -+ port->next_rx_desc->ctrl |= d_eol; -+ port->prev_rx_desc->ctrl &= ~d_eol; -+ port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc); -+ port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next); -+ wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */ -+ *port->input_dma_cmd = IO_STATE(R_DMA_CH1_CMD, cmd, restart); -+ /* DMA has reached end of descriptor */ -+ *port->input_dma_clr_irq = -+ IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do); -+ } -+ } -+ } -+ -+ return IRQ_RETVAL(handled); -+} /* rx_interrupt */ -+#endif /* SYNC_SER_DMA */ -+ -+#ifdef SYNC_SER_MANUAL -+static irqreturn_t manual_interrupt(int irq, void *dev_id) -+{ -+ int i; -+ int handled = 0; -+ -+ for (i = 0; i < NUMBER_OF_PORTS; i++) -+ { -+ sync_port* port = &ports[i]; -+ -+ if (!port->enabled || port->use_dma) -+ { -+ continue; -+ } -+ -+ if (*R_IRQ_MASK1_RD & (1 << port->data_avail_bit)) /* Data received? */ -+ { -+ handled = 1; -+ /* Read data */ -+ switch(port->ctrl_data_shadow & IO_MASK(R_SYNC_SERIAL1_CTRL, wordsize)) -+ { -+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): -+ *port->writep++ = *(volatile char *)port->data_in; -+ break; -+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): -+ { -+ int data = *(unsigned short *)port->data_in; -+ *port->writep = (data & 0x0ff0) >> 4; -+ *(port->writep + 1) = data & 0x0f; -+ port->writep+=2; -+ } -+ break; -+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): -+ *(unsigned short*)port->writep = *(volatile unsigned short *)port->data_in; -+ port->writep+=2; -+ break; -+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): -+ *(unsigned int*)port->writep = *port->data_in; -+ port->writep+=3; -+ break; -+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): -+ *(unsigned int*)port->writep = *port->data_in; -+ port->writep+=4; -+ break; -+ } -+ -+ if (port->writep >= port->flip + port->in_buffer_size) /* Wrap? */ -+ port->writep = port->flip; -+ if (port->writep == port->readp) { -+ /* receive buffer overrun, discard oldest data -+ */ -+ port->readp++; -+ if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ -+ port->readp = port->flip; -+ } -+ if (sync_data_avail(port) >= port->inbufchunk) -+ wake_up_interruptible(&port->in_wait_q); /* Wake up application */ -+ } -+ -+ if (*R_IRQ_MASK1_RD & (1 << port->transmitter_ready_bit)) /* Transmitter ready? */ -+ { -+ if (port->out_count > 0) /* More data to send */ -+ send_word(port); -+ else /* transmission finished */ -+ { -+ *R_IRQ_MASK1_CLR = 1 << port->transmitter_ready_bit; /* Turn off IRQ */ -+ wake_up_interruptible(&port->out_wait_q); /* Wake up application */ -+ } -+ } -+ } -+ return IRQ_RETVAL(handled); -+} -+#endif -+ -+module_init(etrax_sync_serial_init); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/debugport.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/debugport.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/debugport.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/debugport.c 2006-10-30 16:17:57.000000000 +0100 -@@ -12,6 +12,34 @@ - * init_etrax_debug() - * - * $Log: debugport.c,v $ -+ * Revision 1.36 2006/10/30 15:17:57 pkj -+ * Avoid a compiler warning. -+ * -+ * Revision 1.35 2006/10/13 12:43:11 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.34 2006/09/29 10:32:01 starvik -+ * Don't reference serial driver if not present -+ * -+ * Revision 1.33 2006/09/08 07:59:29 karljope -+ * Makes v10 boot again when watchdog is enabled -+ * -+ * Revision 1.32 2006/06/20 08:23:36 pkj -+ * Reverted incorrect merge. -+ * -+ * Revision 1.31 2006/05/17 12:22:10 edgar -+ * check port before disable ints -+ * -+ * Revision 1.30 2005/11/15 12:08:42 starvik -+ * Set index when no debug port is defined -+ * -+ * Revision 1.29 2005/08/29 07:32:17 starvik -+ * Merge of 2.6.13 -+ * -+ * Revision 1.28 2005/07/02 12:29:35 starvik -+ * Use the generic oops_in_progress instead of the raw_printk hack. -+ * Moved some functions to achr-independent code. -+ * - * Revision 1.27 2005/06/10 10:34:14 starvik - * Real console support - * -@@ -112,6 +140,8 @@ - #include - #include /* Get SIMCOUT. */ - -+extern void reset_watchdog(void); -+ - struct dbg_port - { - unsigned int index; -@@ -188,7 +218,9 @@ - } - }; - -+#ifdef CONFIG_ETRAX_SERIAL - extern struct tty_driver *serial_driver; -+#endif - - struct dbg_port* port = - #if defined(CONFIG_ETRAX_DEBUG_PORT0) -@@ -368,11 +400,12 @@ - { - int i; - unsigned long flags; -- local_irq_save(flags); -- -+ - if (!port) - return; -- -+ -+ local_irq_save(flags); -+ - /* Send data */ - for (i = 0; i < len; i++) { - /* LF -> CRLF */ -@@ -386,26 +419,16 @@ - ; - *port->write = buf[i]; - } -- local_irq_restore(flags); --} - --int raw_printk(const char *fmt, ...) --{ -- static char buf[1024]; -- int printed_len; -- static int first = 1; -- if (first) { -- /* Force reinitialization of the port to get manual mode. */ -- port->started = 0; -- start_port(port); -- first = 0; -- } -- va_list args; -- va_start(args, fmt); -- printed_len = vsnprintf(buf, sizeof(buf), fmt, args); -- va_end(args); -- console_write_direct(NULL, buf, strlen(buf)); -- return printed_len; -+ /* -+ * Feed the watchdog, otherwise it will reset the chip during boot. -+ * The time to send an ordinary boot message line (10-90 chars) -+ * varies between 1-8ms at 115200. What makes up for the additional -+ * 90ms that allows the watchdog to bite? -+ */ -+ reset_watchdog(); -+ -+ local_irq_restore(flags); - } - - static void -@@ -500,6 +523,7 @@ - return 0; - } - -+ - /* This is a dummy serial device that throws away anything written to it. - * This is used when no debug output is wanted. - */ -@@ -555,7 +579,13 @@ - { - if (port) - *index = port->index; -+ else -+ *index = 0; -+#ifdef CONFIG_ETRAX_SERIAL - return port ? serial_driver : &dummy_driver; -+#else -+ return &dummy_driver; -+#endif - } - - static struct console sercons = { -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/entry.S linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/entry.S ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/entry.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/entry.S 2007-01-09 10:36:17.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: entry.S,v 1.28 2005/06/20 05:06:30 starvik Exp $ -+/* $Id: entry.S,v 1.38 2007/01/09 09:36:17 starvik Exp $ - * - * linux/arch/cris/entry.S - * -@@ -7,6 +7,41 @@ - * Authors: Bjorn Wesen (bjornw@axis.com) - * - * $Log: entry.S,v $ -+ * Revision 1.38 2007/01/09 09:36:17 starvik -+ * Corrected kernel_execve -+ * -+ * Revision 1.37 2007/01/09 09:29:18 starvik -+ * Merge of Linux 2.6.19 -+ * -+ * Revision 1.36 2006/12/08 13:08:54 orjanf -+ * Copied from Linux 2.4: -+ * * Return from an pin-generated NMI the same way as for other interrupts. -+ * * Reverse check order between external nmi and watchdog nmi to avoid false -+ * watchdog oops in case of a glitch on the nmi pin. -+ * -+ * Revision 1.35 2006/10/13 12:43:11 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.34 2006/06/25 15:00:09 starvik -+ * Merge of Linux 2.6.17 -+ * -+ * Revision 1.33 2006/05/19 12:23:09 orjanf -+ * * Moved blocking of ethernet rx/tx irq from ethernet interrupt handler to -+ * low-level asm interrupt handlers. Fixed in the multiple interrupt handler -+ * also. Copied from Linux 2.4. -+ * -+ * Revision 1.32 2006/03/23 14:53:57 starvik -+ * Corrected signal handling. -+ * -+ * Revision 1.31 2006/03/22 09:56:55 starvik -+ * Merge of Linux 2.6.16 -+ * -+ * Revision 1.30 2005/10/31 08:48:03 starvik -+ * Merge of Linux 2.6.14 -+ * -+ * Revision 1.29 2005/08/29 07:32:17 starvik -+ * Merge of 2.6.13 -+ * - * Revision 1.28 2005/06/20 05:06:30 starvik - * Remove unnecessary diff to kernel.org tree - * -@@ -500,9 +535,8 @@ - ;; deal with pending signals and notify-resume requests - - move.d $r9, $r10 ; do_notify_resume syscall/irq param -- moveq 0, $r11 ; oldset param - 0 in this case -- move.d $sp, $r12 ; the regs param -- move.d $r1, $r13 ; the thread_info_flags parameter -+ move.d $sp, $r11 ; the regs param -+ move.d $r1, $r12 ; the thread_info_flags parameter - jsr do_notify_resume - - ba _Rexit -@@ -653,7 +687,7 @@ - ;; special handlers for breakpoint and NMI - hwbreakpoint: - push $dccr -- di -+ di - push $r10 - push $r11 - move.d [hw_bp_trig_ptr],$r10 -@@ -678,13 +712,19 @@ - push $r10 ; push orig_r10 - clear.d [$sp=$sp-4] ; frametype == 0, normal frame - -+ ;; If there is a glitch on the NMI pin shorter than ~100ns -+ ;; (i.e. non-active by the time we get here) then the nmi_pin bit -+ ;; in R_IRQ_MASK0_RD will already be cleared. The watchdog_nmi bit -+ ;; is cleared by us however (when feeding the watchdog), which is why -+ ;; we use that bit to determine what brought us here. -+ - move.d [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog? -- and.d 0x80000000, $r1 -- beq wdog -+ and.d (1<<30), $r1 -+ bne wdog - move.d $sp, $r10 - jsr handle_nmi - setf m ; Enable NMI again -- retb ; Return from NMI -+ ba _Rexit ; Return the standard way - nop - wdog: - #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) -@@ -774,23 +814,10 @@ - movem $r13, [$sp] - push $r10 ; push orig_r10 - clear.d [$sp=$sp-4] ; frametype == 0, normal frame -- -- moveq 2, $r2 ; first bit we care about is the timer0 irq -- move.d [R_VECT_MASK_RD], $r0; read the irq bits that triggered the multiple irq -- move.d $r0, [R_VECT_MASK_CLR] ; Block all active IRQs --1: -- btst $r2, $r0 ; check for the irq given by bit r2 -- bpl 2f -- move.d $r2, $r10 ; First argument to do_IRQ -- move.d $sp, $r11 ; second argument to do_IRQ -- jsr do_IRQ --2: -- addq 1, $r2 ; next vector bit -- cmp.b 32, $r2 -- bne 1b ; process all irq's up to and including number 31 -- moveq 0, $r9 ; make ret_from_intr realise we came from an ir -- -- move.d $r0, [R_VECT_MASK_SET] ; Unblock all the IRQs -+ -+ move.d $sp, $r10 -+ jsr do_multiple_IRQ -+ - jump ret_from_intr - - do_sigtrap: -@@ -836,6 +863,13 @@ - pop $r0 ; Restore r0. - ba do_sigtrap ; SIGTRAP the offending process. - pop $dccr ; Restore dccr in delay slot. -+ -+ .global kernel_execve -+kernel_execve: -+ move.d __NR_execve, $r9 -+ break 13 -+ ret -+ nop - - .data - -@@ -1135,7 +1169,38 @@ - .long sys_add_key - .long sys_request_key - .long sys_keyctl -- -+ .long sys_ioprio_set -+ .long sys_ioprio_get /* 290 */ -+ .long sys_inotify_init -+ .long sys_inotify_add_watch -+ .long sys_inotify_rm_watch -+ .long sys_migrate_pages -+ .long sys_openat /* 295 */ -+ .long sys_mkdirat -+ .long sys_mknodat -+ .long sys_fchownat -+ .long sys_futimesat -+ .long sys_fstatat64 /* 300 */ -+ .long sys_unlinkat -+ .long sys_renameat -+ .long sys_linkat -+ .long sys_symlinkat -+ .long sys_readlinkat /* 305 */ -+ .long sys_fchmodat -+ .long sys_faccessat -+ .long sys_pselect6 -+ .long sys_ppoll -+ .long sys_unshare /* 310 */ -+ .long sys_set_robust_list -+ .long sys_get_robust_list -+ .long sys_splice -+ .long sys_sync_file_range -+ .long sys_tee /* 315 */ -+ .long sys_vmsplice -+ .long sys_move_pages -+ .long sys_getcpu -+ .long sys_epoll_pwait -+ - /* - * NOTE!! This doesn't have to be exact - we just have - * to make sure we have _enough_ of the "sys_ni_syscall" -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/fasttimer.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/fasttimer.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/fasttimer.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/fasttimer.c 2007-02-05 12:54:34.000000000 +0100 -@@ -1,97 +1,10 @@ --/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $ -+/* - * linux/arch/cris/kernel/fasttimer.c - * - * Fast timers for ETRAX100/ETRAX100LX - * This may be useful in other OS than Linux so use 2 space indentation... - * -- * $Log: fasttimer.c,v $ -- * Revision 1.9 2005/03/04 08:16:16 starvik -- * Merge of Linux 2.6.11. -- * -- * Revision 1.8 2005/01/05 06:09:29 starvik -- * cli()/sti() will be obsolete in 2.6.11. -- * -- * Revision 1.7 2005/01/03 13:35:46 starvik -- * Removed obsolete stuff. -- * Mark fast timer IRQ as not shared. -- * -- * Revision 1.6 2004/05/14 10:18:39 starvik -- * Export fast_timer_list -- * -- * Revision 1.5 2004/05/14 07:58:01 starvik -- * Merge of changes from 2.4 -- * -- * Revision 1.4 2003/07/04 08:27:41 starvik -- * Merge of Linux 2.5.74 -- * -- * Revision 1.3 2002/12/12 08:26:32 starvik -- * Don't use C-comments inside CVS comments -- * -- * Revision 1.2 2002/12/11 15:42:02 starvik -- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/ -- * -- * Revision 1.1 2002/11/18 07:58:06 starvik -- * Fast timers (from Linux 2.4) -- * -- * Revision 1.5 2002/10/15 06:21:39 starvik -- * Added call to init_waitqueue_head -- * -- * Revision 1.4 2002/05/28 17:47:59 johana -- * Added del_fast_timer() -- * -- * Revision 1.3 2002/05/28 16:16:07 johana -- * Handle empty fast_timer_list -- * -- * Revision 1.2 2002/05/27 15:38:42 johana -- * Made it compile without warnings on Linux 2.4. -- * (includes, wait_queue, PROC_FS and snprintf) -- * -- * Revision 1.1 2002/05/27 15:32:25 johana -- * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree. -- * -- * Revision 1.8 2001/11/27 13:50:40 pkj -- * Disable interrupts while stopping the timer and while modifying the -- * list of active timers in timer1_handler() as it may be interrupted -- * by other interrupts (e.g., the serial interrupt) which may add fast -- * timers. -- * -- * Revision 1.7 2001/11/22 11:50:32 pkj -- * * Only store information about the last 16 timers. -- * * proc_fasttimer_read() now uses an allocated buffer, since it -- * requires more space than just a page even for only writing the -- * last 16 timers. The buffer is only allocated on request, so -- * unless /proc/fasttimer is read, it is never allocated. -- * * Renamed fast_timer_started to fast_timers_started to match -- * fast_timers_added and fast_timers_expired. -- * * Some clean-up. -- * -- * Revision 1.6 2000/12/13 14:02:08 johana -- * Removed volatile for fast_timer_list -- * -- * Revision 1.5 2000/12/13 13:55:35 johana -- * Added DEBUG_LOG, added som cli() and cleanup -- * -- * Revision 1.4 2000/12/05 13:48:50 johana -- * Added range check when writing proc file, modified timer int handling -- * -- * Revision 1.3 2000/11/23 10:10:20 johana -- * More debug/logging possibilities. -- * Moved GET_JIFFIES_USEC() to timex.h and time.c -- * -- * Revision 1.2 2000/11/01 13:41:04 johana -- * Clean up and bugfixes. -- * Created new do_gettimeofday_fast() that gets a timeval struct -- * with time based on jiffies and *R_TIMER0_DATA, uses a table -- * for fast conversion of timer value to microseconds. -- * (Much faster the standard do_gettimeofday() and we don't really -- * wan't to use the true time - we wan't the "uptime" so timers don't screw up -- * when we change the time. -- * TODO: Add efficient support for continuous timers as well. -- * -- * Revision 1.1 2000/10/26 15:49:16 johana -- * Added fasttimer, highresolution timers. -- * -- * Copyright (C) 2000,2001 2002 Axis Communications AB, Lund, Sweden -+ * Copyright (C) 2000-2006 Axis Communications AB, Lund, Sweden - */ - - #include -@@ -136,13 +49,13 @@ - - #define __INLINE__ inline - --static int fast_timer_running = 0; --static int fast_timers_added = 0; --static int fast_timers_started = 0; --static int fast_timers_expired = 0; --static int fast_timers_deleted = 0; --static int fast_timer_is_init = 0; --static int fast_timer_ints = 0; -+static unsigned int fast_timer_running = 0; -+static unsigned int fast_timers_added = 0; -+static unsigned int fast_timers_started = 0; -+static unsigned int fast_timers_expired = 0; -+static unsigned int fast_timers_deleted = 0; -+static unsigned int fast_timer_is_init = 0; -+static unsigned int fast_timer_ints = 0; - - struct fast_timer *fast_timer_list = NULL; - -@@ -150,8 +63,8 @@ - #define DEBUG_LOG_MAX 128 - static const char * debug_log_string[DEBUG_LOG_MAX]; - static unsigned long debug_log_value[DEBUG_LOG_MAX]; --static int debug_log_cnt = 0; --static int debug_log_cnt_wrapped = 0; -+static unsigned int debug_log_cnt = 0; -+static unsigned int debug_log_cnt_wrapped = 0; - - #define DEBUG_LOG(string, value) \ - { \ -@@ -206,41 +119,25 @@ - int timer_delay_settings[NUM_TIMER_STATS]; - - /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */ --void __INLINE__ do_gettimeofday_fast(struct timeval *tv) -+void __INLINE__ do_gettimeofday_fast(struct fasttime_t *tv) - { -- unsigned long sec = jiffies; -- unsigned long usec = GET_JIFFIES_USEC(); -- -- usec += (sec % HZ) * (1000000 / HZ); -- sec = sec / HZ; -- -- if (usec > 1000000) -- { -- usec -= 1000000; -- sec++; -- } -- tv->tv_sec = sec; -- tv->tv_usec = usec; -+ tv->tv_jiff = jiffies; -+ tv->tv_usec = GET_JIFFIES_USEC(); - } - --int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1) -+int __INLINE__ timeval_cmp(struct fasttime_t *t0, struct fasttime_t *t1) - { -- if (t0->tv_sec < t1->tv_sec) -- { -+ /* Compare jiffies. Takes care of wrapping */ -+ if (time_before(t0->tv_jiff, t1->tv_jiff)) - return -1; -- } -- else if (t0->tv_sec > t1->tv_sec) -- { -+ else if (time_after(t0->tv_jiff, t1->tv_jiff)) - return 1; -- } -+ -+ /* Compare us */ - if (t0->tv_usec < t1->tv_usec) -- { - return -1; -- } - else if (t0->tv_usec > t1->tv_usec) -- { - return 1; -- } - return 0; - } - -@@ -340,7 +237,7 @@ - printk(KERN_WARNING - "timer name: %s data: 0x%08lX already in list!\n", name, data); - sanity_failed++; -- return; -+ goto done; - } - else - { -@@ -356,11 +253,11 @@ - t->name = name; - - t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000; -- t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000; -+ t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ; - if (t->tv_expires.tv_usec > 1000000) - { - t->tv_expires.tv_usec -= 1000000; -- t->tv_expires.tv_sec++; -+ t->tv_expires.tv_jiff += HZ; - } - #ifdef FAST_TIMER_LOG - timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t; -@@ -401,6 +298,7 @@ - - D2(printk("start_one_shot_timer: %d us done\n", delay_us)); - -+done: - local_irq_restore(flags); - } /* start_one_shot_timer */ - -@@ -444,11 +342,18 @@ - /* Timer 1 interrupt handler */ - - static irqreturn_t --timer1_handler(int irq, void *dev_id, struct pt_regs *regs) -+timer1_handler(int irq, void *dev_id) - { - struct fast_timer *t; - unsigned long flags; - -+ /* We keep interrupts disabled not only when we modify the -+ * fast timer list, but any time we hold a reference to a -+ * timer in the list, since del_fast_timer may be called -+ * from (another) interrupt context. Thus, the only time -+ * when interrupts are enabled is when calling the timer -+ * callback function. -+ */ - local_irq_save(flags); - - /* Clear timer1 irq */ -@@ -466,16 +371,16 @@ - fast_timer_running = 0; - fast_timer_ints++; - -- local_irq_restore(flags); -- - t = fast_timer_list; - while (t) - { -- struct timeval tv; -+ struct fasttime_t tv; -+ fast_timer_function_type *f; -+ unsigned long d; - - /* Has it really expired? */ - do_gettimeofday_fast(&tv); -- D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec)); -+ D1(printk("t: %is %06ius\n", tv.tv_jiff, tv.tv_usec)); - - if (timeval_cmp(&t->tv_expires, &tv) <= 0) - { -@@ -486,7 +391,6 @@ - fast_timers_expired++; - - /* Remove this timer before call, since it may reuse the timer */ -- local_irq_save(flags); - if (t->prev) - { - t->prev->next = t->next; -@@ -501,11 +405,21 @@ - } - t->prev = NULL; - t->next = NULL; -- local_irq_restore(flags); - -- if (t->function != NULL) -+ /* Save function callback data before enabling interrupts, -+ * since the timer may be removed and we don't know how it -+ * was allocated (e.g. ->function and ->data may become -+ * overwritten after deletion if the timer was stack-allocated). -+ */ -+ f = t->function; -+ d = t->data; -+ -+ if (f != NULL) - { -- t->function(t->data); -+ /* Run the callback function with interrupts enabled. */ -+ local_irq_restore(flags); -+ f(d); -+ local_irq_save(flags); - } - else - { -@@ -518,16 +432,19 @@ - D1(printk(".\n")); - } - -- local_irq_save(flags); - if ((t = fast_timer_list) != NULL) - { - /* Start next timer.. */ -- long us; -- struct timeval tv; -+ long us = 0; -+ struct fasttime_t tv; - - do_gettimeofday_fast(&tv); -- us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 + -- t->tv_expires.tv_usec - tv.tv_usec); -+ -+ /* time_after_eq takes care of wrapping */ -+ if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff)) -+ us = ((t->tv_expires.tv_jiff - tv.tv_jiff) * 1000000 / HZ + -+ t->tv_expires.tv_usec - tv.tv_usec); -+ - if (us > 0) - { - if (!fast_timer_running) -@@ -537,7 +454,6 @@ - #endif - start_timer1(us); - } -- local_irq_restore(flags); - break; - } - else -@@ -548,9 +464,10 @@ - D1(printk("e! %d\n", us)); - } - } -- local_irq_restore(flags); - } - -+ local_irq_restore(flags); -+ - if (!t) - { - D1(printk("t1 stop!\n")); -@@ -575,28 +492,17 @@ - void schedule_usleep(unsigned long us) - { - struct fast_timer t; --#ifdef DECLARE_WAITQUEUE - wait_queue_head_t sleep_wait; - init_waitqueue_head(&sleep_wait); -- { -- DECLARE_WAITQUEUE(wait, current); --#else -- struct wait_queue *sleep_wait = NULL; -- struct wait_queue wait = { current, NULL }; --#endif - - D1(printk("schedule_usleep(%d)\n", us)); -- add_wait_queue(&sleep_wait, &wait); -- set_current_state(TASK_INTERRUPTIBLE); - start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us, - "usleep"); -- schedule(); -- set_current_state(TASK_RUNNING); -- remove_wait_queue(&sleep_wait, &wait); -+ /* Uninterruptible sleep on the fast timer. (The condition is somewhat -+ redundant since the timer is what wakes us up.) */ -+ wait_event(sleep_wait, !fast_timer_pending(&t)); -+ - D1(printk("done schedule_usleep(%d)\n", us)); --#ifdef DECLARE_WAITQUEUE -- } --#endif - } - - #ifdef CONFIG_PROC_FS -@@ -616,7 +522,7 @@ - unsigned long flags; - int i = 0; - int num_to_show; -- struct timeval tv; -+ struct fasttime_t tv; - struct fast_timer *t, *nextt; - static char *bigbuf = NULL; - static unsigned long used; -@@ -624,7 +530,8 @@ - if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE))) - { - used = 0; -- bigbuf[0] = '\0'; -+ if (buf) -+ buf[0] = '\0'; - return 0; - } - -@@ -646,7 +553,7 @@ - used += sprintf(bigbuf + used, "Fast timer running: %s\n", - fast_timer_running ? "yes" : "no"); - used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n", -- (unsigned long)tv.tv_sec, -+ (unsigned long)tv.tv_jiff, - (unsigned long)tv.tv_usec); - #ifdef FAST_TIMER_SANITY_CHECKS - used += sprintf(bigbuf + used, "Sanity failed: %i\n", -@@ -696,9 +603,9 @@ - "d: %6li us data: 0x%08lX" - "\n", - t->name, -- (unsigned long)t->tv_set.tv_sec, -+ (unsigned long)t->tv_set.tv_jiff, - (unsigned long)t->tv_set.tv_usec, -- (unsigned long)t->tv_expires.tv_sec, -+ (unsigned long)t->tv_expires.tv_jiff, - (unsigned long)t->tv_expires.tv_usec, - t->delay_us, - t->data -@@ -718,9 +625,9 @@ - "d: %6li us data: 0x%08lX" - "\n", - t->name, -- (unsigned long)t->tv_set.tv_sec, -+ (unsigned long)t->tv_set.tv_jiff, - (unsigned long)t->tv_set.tv_usec, -- (unsigned long)t->tv_expires.tv_sec, -+ (unsigned long)t->tv_expires.tv_jiff, - (unsigned long)t->tv_expires.tv_usec, - t->delay_us, - t->data -@@ -738,9 +645,9 @@ - "d: %6li us data: 0x%08lX" - "\n", - t->name, -- (unsigned long)t->tv_set.tv_sec, -+ (unsigned long)t->tv_set.tv_jiff, - (unsigned long)t->tv_set.tv_usec, -- (unsigned long)t->tv_expires.tv_sec, -+ (unsigned long)t->tv_expires.tv_jiff, - (unsigned long)t->tv_expires.tv_usec, - t->delay_us, - t->data -@@ -761,15 +668,15 @@ - /* " func: 0x%08lX" */ - "\n", - t->name, -- (unsigned long)t->tv_set.tv_sec, -+ (unsigned long)t->tv_set.tv_jiff, - (unsigned long)t->tv_set.tv_usec, -- (unsigned long)t->tv_expires.tv_sec, -+ (unsigned long)t->tv_expires.tv_jiff, - (unsigned long)t->tv_expires.tv_usec, - t->delay_us, - t->data - /* , t->function */ - ); -- local_irq_disable(); -+ local_irq_save(flags); - if (t->next != nextt) - { - printk(KERN_WARNING "timer removed!\n"); -@@ -798,7 +705,7 @@ - static struct fast_timer tr[10]; - static int exp_num[10]; - --static struct timeval tv_exp[100]; -+static struct fasttime_t tv_exp[100]; - - static void test_timeout(unsigned long data) - { -@@ -836,7 +743,7 @@ - int prev_num; - int j; - -- struct timeval tv, tv0, tv1, tv2; -+ struct fasttime_t tv, tv0, tv1, tv2; - - printk("fast_timer_test() start\n"); - do_gettimeofday_fast(&tv); -@@ -849,7 +756,7 @@ - { - do_gettimeofday_fast(&tv_exp[j]); - } -- printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec); -+ printk("fast_timer_test() %is %06i\n", tv.tv_jiff, tv.tv_usec); - - for (j = 0; j < 1000; j++) - { -@@ -859,11 +766,11 @@ - for (j = 0; j < 100; j++) - { - printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n", -- tv_exp[j].tv_sec,tv_exp[j].tv_usec, -- tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec, -- tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec, -- tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec, -- tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec); -+ tv_exp[j].tv_jiff,tv_exp[j].tv_usec, -+ tv_exp[j+1].tv_jiff,tv_exp[j+1].tv_usec, -+ tv_exp[j+2].tv_jiff,tv_exp[j+2].tv_usec, -+ tv_exp[j+3].tv_jiff,tv_exp[j+3].tv_usec, -+ tv_exp[j+4].tv_jiff,tv_exp[j+4].tv_usec); - j += 4; - } - do_gettimeofday_fast(&tv0); -@@ -895,9 +802,9 @@ - } - } - do_gettimeofday_fast(&tv2); -- printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec); -- printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec); -- printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec); -+ printk("Timers started %is %06i\n", tv0.tv_jiff, tv0.tv_usec); -+ printk("Timers started at %is %06i\n", tv1.tv_jiff, tv1.tv_usec); -+ printk("Timers done %is %06i\n", tv2.tv_jiff, tv2.tv_usec); - DP(printk("buf0:\n"); - printk(buf0); - printk("buf1:\n"); -@@ -919,9 +826,9 @@ - printk("%-10s set: %6is %06ius exp: %6is %06ius " - "data: 0x%08X func: 0x%08X\n", - t->name, -- t->tv_set.tv_sec, -+ t->tv_set.tv_jiff, - t->tv_set.tv_usec, -- t->tv_expires.tv_sec, -+ t->tv_expires.tv_jiff, - t->tv_expires.tv_usec, - t->data, - t->function -@@ -929,10 +836,10 @@ - - printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n", - t->delay_us, -- tv_exp[j].tv_sec, -+ tv_exp[j].tv_jiff, - tv_exp[j].tv_usec, - exp_num[j], -- (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); -+ (tv_exp[j].tv_jiff - t->tv_expires.tv_jiff)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); - } - proc_fasttimer_read(buf5, NULL, 0, 0, 0); - printk("buf5 after all done:\n"); -@@ -942,7 +849,7 @@ - #endif - - --void fast_timer_init(void) -+int fast_timer_init(void) - { - /* For some reason, request_irq() hangs when called froom time_init() */ - if (!fast_timer_is_init) -@@ -975,4 +882,6 @@ - fast_timer_test(); - #endif - } -+ return 0; - } -+__initcall(fast_timer_init); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/head.S linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/head.S ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/head.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/head.S 2006-10-20 09:33:26.000000000 +0200 -@@ -1,4 +1,4 @@ --/* $Id: head.S,v 1.10 2005/06/20 05:12:54 starvik Exp $ -+/* $Id: head.S,v 1.13 2006/10/20 07:33:26 kjelld Exp $ - * - * Head of the kernel - alter with care - * -@@ -7,6 +7,19 @@ - * Authors: Bjorn Wesen (bjornw@axis.com) - * - * $Log: head.S,v $ -+ * Revision 1.13 2006/10/20 07:33:26 kjelld -+ * If serial port 2 is used, select it in R_GEN_CONFIG. -+ * If serial port 2 is used, setup the control registers for the port. -+ * This is done to avoid a puls on the TXD line during start up. -+ * This puls could disturbe some units (e.g. some Axis 214 with internal -+ * ver. 1.08). -+ * -+ * Revision 1.12 2006/10/13 12:43:11 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.11 2005/08/29 07:32:17 starvik -+ * Merge of 2.6.13 -+ * - * Revision 1.10 2005/06/20 05:12:54 starvik - * Remove unnecessary diff to kernel.org tree - * -@@ -595,11 +608,17 @@ - - moveq 0,$r0 - -+ ;; Select or disable serial port 2 -+#ifdef CONFIG_ETRAX_SERIAL_PORT2 -+ or.d IO_STATE (R_GEN_CONFIG, ser2, select),$r0 -+#else -+ or.d IO_STATE (R_GEN_CONFIG, ser2, disable),$r0 -+#endif -+ - ;; Init interfaces (disable them). - or.d IO_STATE (R_GEN_CONFIG, scsi0, disable) \ - | IO_STATE (R_GEN_CONFIG, ata, disable) \ - | IO_STATE (R_GEN_CONFIG, par0, disable) \ -- | IO_STATE (R_GEN_CONFIG, ser2, disable) \ - | IO_STATE (R_GEN_CONFIG, mio, disable) \ - | IO_STATE (R_GEN_CONFIG, scsi1, disable) \ - | IO_STATE (R_GEN_CONFIG, scsi0w, disable) \ -@@ -801,6 +820,41 @@ - | IO_STATE (R_SERIAL1_TR_CTRL, tr_bitnr, tr_8bit),$r0 - move.b $r0,[R_SERIAL1_TR_CTRL] - -+#ifdef CONFIG_ETRAX_SERIAL_PORT2 -+ ;; setup the serial port 2 at 115200 baud for debug purposes -+ -+ moveq IO_STATE (R_SERIAL2_XOFF, tx_stop, enable) \ -+ | IO_STATE (R_SERIAL2_XOFF, auto_xoff, disable) \ -+ | IO_FIELD (R_SERIAL2_XOFF, xoff_char, 0),$r0 -+ move.d $r0,[R_SERIAL2_XOFF] -+ -+ ; 115.2kbaud for both transmit and receive -+ move.b IO_STATE (R_SERIAL2_BAUD, tr_baud, c115k2Hz) \ -+ | IO_STATE (R_SERIAL2_BAUD, rec_baud, c115k2Hz),$r0 -+ move.b $r0,[R_SERIAL2_BAUD] -+ -+ ; Set up and enable the serial2 receiver. -+ move.b IO_STATE (R_SERIAL2_REC_CTRL, dma_err, stop) \ -+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_enable, enable) \ -+ | IO_STATE (R_SERIAL2_REC_CTRL, rts_, active) \ -+ | IO_STATE (R_SERIAL2_REC_CTRL, sampling, middle) \ -+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_stick_par, normal) \ -+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_par, even) \ -+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_par_en, disable) \ -+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_bitnr, rec_8bit),$r0 -+ move.b $r0,[R_SERIAL2_REC_CTRL] -+ -+ ; Set up and enable the serial2 transmitter. -+ move.b IO_FIELD (R_SERIAL2_TR_CTRL, txd, 0) \ -+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_enable, enable) \ -+ | IO_STATE (R_SERIAL2_TR_CTRL, auto_cts, disabled) \ -+ | IO_STATE (R_SERIAL2_TR_CTRL, stop_bits, one_bit) \ -+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_stick_par, normal) \ -+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_par, even) \ -+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_par_en, disable) \ -+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_bitnr, tr_8bit),$r0 -+ move.b $r0,[R_SERIAL2_TR_CTRL] -+#endif - - #ifdef CONFIG_ETRAX_SERIAL_PORT3 - ;; setup the serial port 3 at 115200 baud for debug purposes -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/io_interface_mux.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/io_interface_mux.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/io_interface_mux.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/io_interface_mux.c 2006-10-04 20:21:18.000000000 +0200 -@@ -1,10 +1,10 @@ - /* IO interface mux allocator for ETRAX100LX. -- * Copyright 2004, Axis Communications AB -- * $Id: io_interface_mux.c,v 1.2 2004/12/21 12:08:38 starvik Exp $ -+ * Copyright 2004-2006, Axis Communications AB -+ * $Id: io_interface_mux.c,v 1.4 2006/10/04 18:21:18 henriken Exp $ - */ - - --/* C.f. ETRAX100LX Designer's Reference 20.9 */ -+/* C.f. ETRAX100LX Designer's Reference 19.9 */ - - #include - #include -@@ -35,7 +35,7 @@ - struct watcher - { - void (*notify)(const unsigned int gpio_in_available, -- const unsigned int gpio_out_available, -+ const unsigned int gpio_out_available, - const unsigned char pa_available, - const unsigned char pb_available); - struct watcher *next; -@@ -45,17 +45,40 @@ - struct if_group - { - enum io_if_group group; -- unsigned char used; -- enum cris_io_interface owner; -+ // name - the name of the group 'A' to 'F' -+ char *name; -+ // used - a bit mask of all pins in the group in the order listed -+ // in in the tables in 19.9.1 to 19.9.6. Note that no -+ // distinction is made between in, out and in/out pins. -+ unsigned int used; - }; - - - struct interface - { - enum cris_io_interface ioif; -+ // name - the name of the interface -+ char *name; -+ // groups - OR'ed together io_if_group flags describing what pin groups -+ // the interface uses pins in. - unsigned char groups; -+ // used - set when the interface is allocated. - unsigned char used; - char *owner; -+ // group_a through group_f - bit masks describing what pins in the -+ // pin groups the interface uses. -+ unsigned int group_a; -+ unsigned int group_b; -+ unsigned int group_c; -+ unsigned int group_d; -+ unsigned int group_e; -+ unsigned int group_f; -+ -+ // gpio_g_in, gpio_g_out, gpio_b - bit masks telling what pins in the -+ // GPIO ports the interface uses. This -+ // could be reconstucted using the group_X -+ // masks and a table of what pins the GPIO -+ // ports use, but that would be messy. - unsigned int gpio_g_in; - unsigned int gpio_g_out; - unsigned char gpio_b; -@@ -64,26 +87,32 @@ - static struct if_group if_groups[6] = { - { - .group = group_a, -+ .name = "A", - .used = 0, - }, - { - .group = group_b, -+ .name = "B", - .used = 0, - }, - { - .group = group_c, -+ .name = "C", - .used = 0, - }, - { - .group = group_d, -+ .name = "D", - .used = 0, - }, - { - .group = group_e, -+ .name = "E", - .used = 0, - }, - { - .group = group_f, -+ .name = "F", - .used = 0, - } - }; -@@ -94,14 +123,32 @@ - /* Begin Non-multiplexed interfaces */ - { - .ioif = if_eth, -+ .name = "ethernet", - .groups = 0, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0, - .gpio_g_out = 0, - .gpio_b = 0 - }, - { - .ioif = if_serial_0, -+ .name = "serial_0", - .groups = 0, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0, - .gpio_g_out = 0, - .gpio_b = 0 -@@ -109,172 +156,385 @@ - /* End Non-multiplexed interfaces */ - { - .ioif = if_serial_1, -+ .name = "serial_1", - .groups = group_e, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0x0f, -+ .group_f = 0, -+ - .gpio_g_in = 0x00000000, - .gpio_g_out = 0x00000000, - .gpio_b = 0x00 - }, - { - .ioif = if_serial_2, -+ .name = "serial_2", - .groups = group_b, -+ -+ .group_a = 0, -+ .group_b = 0x0f, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x000000c0, - .gpio_g_out = 0x000000c0, - .gpio_b = 0x00 - }, - { - .ioif = if_serial_3, -+ .name = "serial_3", - .groups = group_c, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0x0f, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0xc0000000, - .gpio_g_out = 0xc0000000, - .gpio_b = 0x00 - }, - { - .ioif = if_sync_serial_1, -- .groups = group_e | group_f, /* if_sync_serial_1 and if_sync_serial_3 -- can be used simultaneously */ -+ .name = "sync_serial_1", -+ .groups = group_e | group_f, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0x0f, -+ .group_f = 0x10, -+ - .gpio_g_in = 0x00000000, - .gpio_g_out = 0x00000000, - .gpio_b = 0x10 - }, - { - .ioif = if_sync_serial_3, -+ .name = "sync_serial_3", - .groups = group_c | group_f, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0x0f, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0x80, -+ - .gpio_g_in = 0xc0000000, - .gpio_g_out = 0xc0000000, - .gpio_b = 0x80 - }, - { - .ioif = if_shared_ram, -+ .name = "shared_ram", - .groups = group_a, -+ -+ .group_a = 0x7f8ff, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x0000ff3e, - .gpio_g_out = 0x0000ff38, - .gpio_b = 0x00 - }, - { - .ioif = if_shared_ram_w, -+ .name = "shared_ram_w", - .groups = group_a | group_d, -+ -+ .group_a = 0x7f8ff, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0xff, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x00ffff3e, - .gpio_g_out = 0x00ffff38, - .gpio_b = 0x00 - }, - { - .ioif = if_par_0, -+ .name = "par_0", - .groups = group_a, -+ -+ .group_a = 0x7fbff, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x0000ff3e, - .gpio_g_out = 0x0000ff3e, - .gpio_b = 0x00 - }, - { - .ioif = if_par_1, -+ .name = "par_1", - .groups = group_d, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0x7feff, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x3eff0000, - .gpio_g_out = 0x3eff0000, - .gpio_b = 0x00 - }, - { - .ioif = if_par_w, -+ .name = "par_w", - .groups = group_a | group_d, -+ -+ .group_a = 0x7fbff, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0xff, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x00ffff3e, - .gpio_g_out = 0x00ffff3e, - .gpio_b = 0x00 - }, - { - .ioif = if_scsi8_0, -- .groups = group_a | group_b | group_f, /* if_scsi8_0 and if_scsi8_1 -- can be used simultaneously */ -+ .name = "scsi8_0", -+ .groups = group_a | group_b | group_f, -+ -+ .group_a = 0x7ffff, -+ .group_b = 0x0f, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0x10, -+ - .gpio_g_in = 0x0000ffff, - .gpio_g_out = 0x0000ffff, - .gpio_b = 0x10 - }, - { - .ioif = if_scsi8_1, -- .groups = group_c | group_d | group_f, /* if_scsi8_0 and if_scsi8_1 -- can be used simultaneously */ -+ .name = "scsi8_1", -+ .groups = group_c | group_d | group_f, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0x0f, -+ .group_d = 0x7ffff, -+ .group_e = 0, -+ .group_f = 0x80, -+ - .gpio_g_in = 0xffff0000, - .gpio_g_out = 0xffff0000, - .gpio_b = 0x80 - }, - { - .ioif = if_scsi_w, -+ .name = "scsi_w", - .groups = group_a | group_b | group_d | group_f, -+ -+ .group_a = 0x7ffff, -+ .group_b = 0x0f, -+ .group_c = 0, -+ .group_d = 0x601ff, -+ .group_e = 0, -+ .group_f = 0x90, -+ - .gpio_g_in = 0x01ffffff, - .gpio_g_out = 0x07ffffff, - .gpio_b = 0x80 - }, - { - .ioif = if_ata, -+ .name = "ata", - .groups = group_a | group_b | group_c | group_d, -+ -+ .group_a = 0x7ffff, -+ .group_b = 0x0f, -+ .group_c = 0x0f, -+ .group_d = 0x7cfff, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0xf9ffffff, - .gpio_g_out = 0xffffffff, - .gpio_b = 0x80 - }, - { - .ioif = if_csp, -- .groups = group_f, /* if_csp and if_i2c can be used simultaneously */ -+ .name = "csp", -+ .groups = group_f, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0xfc, -+ - .gpio_g_in = 0x00000000, - .gpio_g_out = 0x00000000, - .gpio_b = 0xfc - }, - { - .ioif = if_i2c, -- .groups = group_f, /* if_csp and if_i2c can be used simultaneously */ -+ .name = "i2c", -+ .groups = group_f, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0x03, -+ - .gpio_g_in = 0x00000000, - .gpio_g_out = 0x00000000, - .gpio_b = 0x03 - }, - { - .ioif = if_usb_1, -+ .name = "usb_1", - .groups = group_e | group_f, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0x0f, -+ .group_f = 0x2c, -+ - .gpio_g_in = 0x00000000, - .gpio_g_out = 0x00000000, - .gpio_b = 0x2c - }, - { - .ioif = if_usb_2, -+ .name = "usb_2", - .groups = group_d, -- .gpio_g_in = 0x0e000000, -- .gpio_g_out = 0x3c000000, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0x33e00, -+ .group_f = 0, -+ -+ .gpio_g_in = 0x3e000000, -+ .gpio_g_out = 0x0c000000, - .gpio_b = 0x00 - }, - /* GPIO pins */ - { - .ioif = if_gpio_grp_a, -+ .name = "gpio_a", - .groups = group_a, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x0000ff3f, - .gpio_g_out = 0x0000ff3f, - .gpio_b = 0x00 - }, - { - .ioif = if_gpio_grp_b, -+ .name = "gpio_b", - .groups = group_b, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x000000c0, - .gpio_g_out = 0x000000c0, - .gpio_b = 0x00 - }, - { - .ioif = if_gpio_grp_c, -+ .name = "gpio_c", - .groups = group_c, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0xc0000000, - .gpio_g_out = 0xc0000000, - .gpio_b = 0x00 - }, - { - .ioif = if_gpio_grp_d, -+ .name = "gpio_d", - .groups = group_d, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x3fff0000, - .gpio_g_out = 0x3fff0000, - .gpio_b = 0x00 - }, - { - .ioif = if_gpio_grp_e, -+ .name = "gpio_e", - .groups = group_e, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x00000000, - .gpio_g_out = 0x00000000, - .gpio_b = 0x00 - }, - { - .ioif = if_gpio_grp_f, -+ .name = "gpio_f", - .groups = group_f, -+ -+ .group_a = 0, -+ .group_b = 0, -+ .group_c = 0, -+ .group_d = 0, -+ .group_e = 0, -+ .group_f = 0, -+ - .gpio_g_in = 0x00000000, - .gpio_g_out = 0x00000000, - .gpio_b = 0xff -@@ -284,11 +544,13 @@ - - static struct watcher *watchers = NULL; - -+// The pins that are free to use in the GPIO ports. - static unsigned int gpio_in_pins = 0xffffffff; - static unsigned int gpio_out_pins = 0xffffffff; - static unsigned char gpio_pb_pins = 0xff; - static unsigned char gpio_pa_pins = 0xff; - -+// Identifiers for the owners of the GPIO pins. - static enum cris_io_interface gpio_pa_owners[8]; - static enum cris_io_interface gpio_pb_owners[8]; - static enum cris_io_interface gpio_pg_owners[32]; -@@ -318,7 +580,7 @@ - struct watcher *w = watchers; - - DBG(printk("io_interface_mux: notifying watchers\n")); -- -+ - while (NULL != w) { - w->notify((const unsigned int)gpio_in_pins, - (const unsigned int)gpio_out_pins, -@@ -354,37 +616,48 @@ - - if (interfaces[ioif].used) { - local_irq_restore(flags); -- printk(KERN_CRIT "cris_io_interface: Cannot allocate interface for %s, in use by %s\n", -+ printk(KERN_CRIT "cris_io_interface: Cannot allocate interface %s for %s, in use by %s\n", -+ interfaces[ioif].name, - device_id, - interfaces[ioif].owner); - return -EBUSY; - } - -- /* Check that all required groups are free before allocating, */ -+ /* Check that all required pins in the used groups are free -+ * before allocating. */ - group_set = interfaces[ioif].groups; - while (NULL != (grp = get_group(group_set))) { -- if (grp->used) { -- if (grp->group == group_f) { -- if ((if_sync_serial_1 == ioif) || -- (if_sync_serial_3 == ioif)) { -- if ((grp->owner != if_sync_serial_1) && -- (grp->owner != if_sync_serial_3)) { -- local_irq_restore(flags); -- return -EBUSY; -- } -- } else if ((if_scsi8_0 == ioif) || -- (if_scsi8_1 == ioif)) { -- if ((grp->owner != if_scsi8_0) && -- (grp->owner != if_scsi8_1)) { -- local_irq_restore(flags); -- return -EBUSY; -- } -- } -- } else { -- local_irq_restore(flags); -- return -EBUSY; -- } -+ unsigned int if_group_use = 0; -+ -+ switch(grp->group) { -+ case group_a: -+ if_group_use = interfaces[ioif].group_a; -+ break; -+ case group_b: -+ if_group_use = interfaces[ioif].group_b; -+ break; -+ case group_c: -+ if_group_use = interfaces[ioif].group_c; -+ break; -+ case group_d: -+ if_group_use = interfaces[ioif].group_d; -+ break; -+ case group_e: -+ if_group_use = interfaces[ioif].group_e; -+ break; -+ case group_f: -+ if_group_use = interfaces[ioif].group_f; -+ break; -+ default: -+ BUG_ON(1); - } -+ -+ if(if_group_use & grp->used) { -+ local_irq_restore(flags); -+ printk(KERN_INFO "cris_request_io_interface: group %s needed by %s not available\n", grp->name, interfaces[ioif].name); -+ return -EBUSY; -+ } -+ - group_set = clear_group_from_set(group_set, grp); - } - -@@ -392,22 +665,16 @@ - if (((interfaces[ioif].gpio_g_in & gpio_in_pins) != interfaces[ioif].gpio_g_in) || - ((interfaces[ioif].gpio_g_out & gpio_out_pins) != interfaces[ioif].gpio_g_out) || - ((interfaces[ioif].gpio_b & gpio_pb_pins) != interfaces[ioif].gpio_b)) { -- printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %u\n", -- ioif); -+ local_irq_restore(flags); -+ printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %s\n", -+ interfaces[ioif].name); - return -EBUSY; - } - -- /* All needed I/O pins and pin groups are free, allocate. */ -- group_set = interfaces[ioif].groups; -- while (NULL != (grp = get_group(group_set))) { -- grp->used = 1; -- grp->owner = ioif; -- group_set = clear_group_from_set(group_set, grp); -- } -- -+ /* Check which registers need to be reconfigured. */ - gens = genconfig_shadow; - gens_ii = gen_config_ii_shadow; -- -+ - set_gen_config = 1; - switch (ioif) - { -@@ -494,9 +761,43 @@ - set_gen_config = 0; - break; - default: -- panic("cris_request_io_interface: Bad interface %u submitted for %s\n", -- ioif, -- device_id); -+ local_irq_restore(flags); -+ printk(KERN_INFO "cris_request_io_interface: Bad interface %u submitted for %s\n", -+ ioif, -+ device_id); -+ return -EBUSY; -+ } -+ -+ /* All needed I/O pins and pin groups are free, allocate. */ -+ group_set = interfaces[ioif].groups; -+ while (NULL != (grp = get_group(group_set))) { -+ unsigned int if_group_use = 0; -+ -+ switch(grp->group) { -+ case group_a: -+ if_group_use = interfaces[ioif].group_a; -+ break; -+ case group_b: -+ if_group_use = interfaces[ioif].group_b; -+ break; -+ case group_c: -+ if_group_use = interfaces[ioif].group_c; -+ break; -+ case group_d: -+ if_group_use = interfaces[ioif].group_d; -+ break; -+ case group_e: -+ if_group_use = interfaces[ioif].group_e; -+ break; -+ case group_f: -+ if_group_use = interfaces[ioif].group_f; -+ break; -+ default: -+ BUG_ON(1); -+ } -+ grp->used |= if_group_use; -+ -+ group_set = clear_group_from_set(group_set, grp); - } - - interfaces[ioif].used = 1; -@@ -528,7 +829,7 @@ - - DBG(printk("GPIO pins: available after: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", - gpio_in_pins, gpio_out_pins, gpio_pb_pins)); -- -+ - local_irq_restore(flags); - - notify_watchers(); -@@ -559,43 +860,36 @@ - } - group_set = interfaces[ioif].groups; - while (NULL != (grp = get_group(group_set))) { -- if (grp->group == group_f) { -- switch (ioif) -- { -- case if_sync_serial_1: -- if ((grp->owner == if_sync_serial_1) && -- interfaces[if_sync_serial_3].used) { -- grp->owner = if_sync_serial_3; -- } else -- grp->used = 0; -- break; -- case if_sync_serial_3: -- if ((grp->owner == if_sync_serial_3) && -- interfaces[if_sync_serial_1].used) { -- grp->owner = if_sync_serial_1; -- } else -- grp->used = 0; -- break; -- case if_scsi8_0: -- if ((grp->owner == if_scsi8_0) && -- interfaces[if_scsi8_1].used) { -- grp->owner = if_scsi8_1; -- } else -- grp->used = 0; -- break; -- case if_scsi8_1: -- if ((grp->owner == if_scsi8_1) && -- interfaces[if_scsi8_0].used) { -- grp->owner = if_scsi8_0; -- } else -- grp->used = 0; -- break; -- default: -- grp->used = 0; -- } -- } else { -- grp->used = 0; -+ unsigned int if_group_use = 0; -+ -+ switch(grp->group) { -+ case group_a: -+ if_group_use = interfaces[ioif].group_a; -+ break; -+ case group_b: -+ if_group_use = interfaces[ioif].group_b; -+ break; -+ case group_c: -+ if_group_use = interfaces[ioif].group_c; -+ break; -+ case group_d: -+ if_group_use = interfaces[ioif].group_d; -+ break; -+ case group_e: -+ if_group_use = interfaces[ioif].group_e; -+ break; -+ case group_f: -+ if_group_use = interfaces[ioif].group_f; -+ break; -+ default: -+ BUG_ON(1); - } -+ -+ if ((grp->used & if_group_use) != if_group_use) { -+ BUG_ON(1); -+ } -+ grp->used = grp->used & ~if_group_use; -+ - group_set = clear_group_from_set(group_set, grp); - } - interfaces[ioif].used = 0; -@@ -784,7 +1078,7 @@ - - for (i = start_bit; i <= stop_bit; i++) { - owners[i] = if_unclaimed; -- } -+ } - local_irq_restore(flags); - notify_watchers(); - -@@ -821,7 +1115,7 @@ - } - - void cris_io_interface_delete_watcher(void (*notify)(const unsigned int gpio_in_available, -- const unsigned int gpio_out_available, -+ const unsigned int gpio_out_available, - const unsigned char pa_available, - const unsigned char pb_available)) - { -@@ -870,7 +1164,7 @@ - - module_init(cris_io_interface_init); - -- -+ - EXPORT_SYMBOL(cris_request_io_interface); - EXPORT_SYMBOL(cris_free_io_interface); - EXPORT_SYMBOL(cris_io_interface_allocate_pins); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/irq.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/irq.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/irq.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/irq.c 2006-10-30 16:17:03.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: irq.c,v 1.4 2005/01/04 12:22:28 starvik Exp $ -+/* $Id: irq.c,v 1.9 2006/10/30 15:17:03 pkj Exp $ - * - * linux/arch/cris/kernel/irq.c - * -@@ -12,7 +12,9 @@ - */ - - #include -+#include - #include -+#include - #include - #include - -@@ -75,8 +77,8 @@ - BUILD_IRQ(13, 0x2000) - void mmu_bus_fault(void); /* IRQ 14 is the bus fault interrupt */ - void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */ --BUILD_IRQ(16, 0x10000) --BUILD_IRQ(17, 0x20000) -+BUILD_IRQ(16, 0x10000 | 0x20000) /* ethernet tx interrupt needs to block rx */ -+BUILD_IRQ(17, 0x20000 | 0x10000) /* ...and vice versa */ - BUILD_IRQ(18, 0x40000) - BUILD_IRQ(19, 0x80000) - BUILD_IRQ(20, 0x100000) -@@ -147,6 +149,55 @@ - void do_sigtrap(void); /* from entry.S */ - void gdb_handle_breakpoint(void); /* from entry.S */ - -+extern void do_IRQ(int irq, struct pt_regs * regs); -+ -+/* Handle multiple IRQs */ -+void do_multiple_IRQ(struct pt_regs* regs) -+{ -+ int bit; -+ unsigned masked; -+ unsigned mask; -+ unsigned ethmask = 0; -+ -+ /* Get interrupts to mask and handle */ -+ mask = masked = *R_VECT_MASK_RD; -+ -+ /* Never mask timer IRQ */ -+ mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0)); -+ -+ /* -+ * If either ethernet interrupt (rx or tx) is active then block -+ * the other one too. Unblock afterwards also. -+ */ -+ if (mask & -+ (IO_STATE(R_VECT_MASK_RD, dma0, active) | -+ IO_STATE(R_VECT_MASK_RD, dma1, active))) { -+ ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) | -+ IO_MASK(R_VECT_MASK_RD, dma1)); -+ } -+ -+ /* Block them */ -+ *R_VECT_MASK_CLR = (mask | ethmask); -+ -+ /* An extra irq_enter here to prevent softIRQs to run after -+ * each do_IRQ. This will decrease the interrupt latency. -+ */ -+ irq_enter(); -+ -+ /* Handle all IRQs */ -+ for (bit = 2; bit < 32; bit++) { -+ if (masked & (1 << bit)) { -+ do_IRQ(bit, regs); -+ } -+ } -+ -+ /* This irq_exit() will trigger the soft IRQs. */ -+ irq_exit(); -+ -+ /* Unblock the IRQs again */ -+ *R_VECT_MASK_SET = (masked | ethmask); -+} -+ - /* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and - setting the irq vector table. - */ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/kgdb.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/kgdb.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/kgdb.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/kgdb.c 2006-03-22 10:56:55.000000000 +0100 -@@ -18,6 +18,10 @@ - *! Jul 21 1999 Bjorn Wesen eLinux port - *! - *! $Log: kgdb.c,v $ -+*! Revision 1.7 2006/03/22 09:56:55 starvik -+*! Merge of Linux 2.6.16 -+*! -+*! - *! Revision 1.6 2005/01/14 10:12:17 starvik - *! KGDB on separate port. - *! Console fixes from 2.4. -@@ -75,7 +79,7 @@ - *! - *!--------------------------------------------------------------------------- - *! --*! $Id: kgdb.c,v 1.6 2005/01/14 10:12:17 starvik Exp $ -+*! $Id: kgdb.c,v 1.7 2006/03/22 09:56:55 starvik Exp $ - *! - *! (C) Copyright 1999, Axis Communications AB, LUND, SWEDEN - *! -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/process.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/process.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/process.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/process.c 2006-10-13 14:43:11.000000000 +0200 -@@ -1,4 +1,4 @@ --/* $Id: process.c,v 1.12 2004/12/27 11:18:32 starvik Exp $ -+/* $Id: process.c,v 1.14 2006/10/13 12:43:11 starvik Exp $ - * - * linux/arch/cris/kernel/process.c - * -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/ptrace.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/ptrace.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/ptrace.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/ptrace.c 2006-10-30 16:17:57.000000000 +0100 -@@ -66,6 +66,7 @@ - ptrace_disable(struct task_struct *child) - { - /* Todo - pending singlesteps? */ -+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - } - - /* -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/setup.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/setup.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/setup.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/setup.c 2006-10-13 14:43:11.000000000 +0200 -@@ -1,4 +1,4 @@ --/* -+/* - * - * linux/arch/cris/arch-v10/kernel/setup.c - * -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - - #ifdef CONFIG_PROC_FS - #define HAS_FPU 0x0001 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/signal.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/signal.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/signal.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/signal.c 2006-03-22 10:56:55.000000000 +0100 -@@ -41,7 +41,7 @@ - */ - #define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->irp -= 2; - --int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs); -+void do_signal(int canrestart, struct pt_regs *regs); - - /* - * Atomically swap in the new signal mask, and wait for a signal. Define -@@ -52,68 +52,16 @@ - sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof, - long srp, struct pt_regs *regs) - { -- sigset_t saveset; -- - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); -- saveset = current->blocked; -- siginitset(¤t->blocked, mask); -- recalc_sigpending(); -- spin_unlock_irq(¤t->sighand->siglock); -- -- regs->r10 = -EINTR; -- while (1) { -- current->state = TASK_INTERRUPTIBLE; -- schedule(); -- if (do_signal(0, &saveset, regs)) -- /* We will get here twice: once to call the signal -- handler, then again to return from the -- sigsuspend system call. When calling the -- signal handler, R10 holds the signal number as -- set through do_signal. The sigsuspend call -- will return with the restored value set above; -- always -EINTR. */ -- return regs->r10; -- } --} -- --/* Define dummy arguments to be able to reach the regs argument. (Note that -- * this arrangement relies on size_t occupying one register.) -- */ --int --sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13, -- long mof, long srp, struct pt_regs *regs) --{ -- sigset_t saveset, newset; -- -- /* XXX: Don't preclude handling different sized sigset_t's. */ -- if (sigsetsize != sizeof(sigset_t)) -- return -EINVAL; -- -- if (copy_from_user(&newset, unewset, sizeof(newset))) -- return -EFAULT; -- sigdelsetmask(&newset, ~_BLOCKABLE); -- -- spin_lock_irq(¤t->sighand->siglock); -- saveset = current->blocked; -- current->blocked = newset; -+ current->saved_sigmask = current->blocked; -+ siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); -- -- regs->r10 = -EINTR; -- while (1) { -- current->state = TASK_INTERRUPTIBLE; -- schedule(); -- if (do_signal(0, &saveset, regs)) -- /* We will get here twice: once to call the signal -- handler, then again to return from the -- sigsuspend system call. When calling the -- signal handler, R10 holds the signal number as -- set through do_signal. The sigsuspend call -- will return with the restored value set above; -- always -EINTR. */ -- return regs->r10; -- } -+ current->state = TASK_INTERRUPTIBLE; -+ schedule(); -+ set_thread_flag(TIF_RESTORE_SIGMASK); -+ return -ERESTARTNOHAND; - } - - int -@@ -353,8 +301,8 @@ - * user-mode trampoline. - */ - --static void setup_frame(int sig, struct k_sigaction *ka, -- sigset_t *set, struct pt_regs * regs) -+static int setup_frame(int sig, struct k_sigaction *ka, -+ sigset_t *set, struct pt_regs * regs) - { - struct sigframe __user *frame; - unsigned long return_ip; -@@ -402,14 +350,15 @@ - - wrusp((unsigned long)frame); - -- return; -+ return 0; - - give_sigsegv: - force_sigsegv(sig, current); -+ return -EFAULT; - } - --static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, -- sigset_t *set, struct pt_regs * regs) -+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, -+ sigset_t *set, struct pt_regs * regs) - { - struct rt_sigframe __user *frame; - unsigned long return_ip; -@@ -466,21 +415,24 @@ - - wrusp((unsigned long)frame); - -- return; -+ return 0; - - give_sigsegv: - force_sigsegv(sig, current); -+ return -EFAULT; - } - - /* - * OK, we're invoking a handler - */ - --static inline void -+static inline int - handle_signal(int canrestart, unsigned long sig, - siginfo_t *info, struct k_sigaction *ka, - sigset_t *oldset, struct pt_regs * regs) - { -+ int ret; -+ - /* Are we from a system call? */ - if (canrestart) { - /* If so, check system call restarting.. */ -@@ -510,19 +462,20 @@ - - /* Set up the stack frame */ - if (ka->sa.sa_flags & SA_SIGINFO) -- setup_rt_frame(sig, ka, info, oldset, regs); -+ ret = setup_rt_frame(sig, ka, info, oldset, regs); - else -- setup_frame(sig, ka, oldset, regs); -+ ret = setup_frame(sig, ka, oldset, regs); - -- if (ka->sa.sa_flags & SA_ONESHOT) -- ka->sa.sa_handler = SIG_DFL; -+ if (ret == 0) { -+ spin_lock_irq(¤t->sighand->siglock); -+ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); -+ if (!(ka->sa.sa_flags & SA_NODEFER)) -+ sigaddset(¤t->blocked,sig); -+ recalc_sigpending(); -+ spin_unlock_irq(¤t->sighand->siglock); -+ } - -- spin_lock_irq(¤t->sighand->siglock); -- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); -- if (!(ka->sa.sa_flags & SA_NODEFER)) -- sigaddset(¤t->blocked,sig); -- recalc_sigpending(); -- spin_unlock_irq(¤t->sighand->siglock); -+ return ret; - } - - /* -@@ -537,12 +490,13 @@ - * mode below. - */ - --int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs) -+void do_signal(int canrestart, struct pt_regs *regs) - { - siginfo_t info; - int signr; - struct k_sigaction ka; -- -+ sigset_t *oldset; -+ - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from -@@ -550,16 +504,26 @@ - * if so. - */ - if (!user_mode(regs)) -- return 1; -+ return; - -- if (!oldset) -+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) -+ oldset = ¤t->saved_sigmask; -+ else - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, NULL); - if (signr > 0) { - /* Whee! Actually deliver the signal. */ -- handle_signal(canrestart, signr, &info, &ka, oldset, regs); -- return 1; -+ if (handle_signal(canrestart, signr, &info, &ka, oldset, regs)) { -+ /* a signal was successfully delivered; the saved -+ * sigmask will have been stored in the signal frame, -+ * and will be restored by sigreturn, so we can simply -+ * clear the TIF_RESTORE_SIGMASK flag */ -+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) -+ clear_thread_flag(TIF_RESTORE_SIGMASK); -+ } -+ -+ return; - } - - /* Did we come from a system call? */ -@@ -575,5 +539,11 @@ - regs->irp -= 2; - } - } -- return 0; -+ -+ /* if there's no signal to deliver, we just put the saved sigmask -+ * back */ -+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) { -+ clear_thread_flag(TIF_RESTORE_SIGMASK); -+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); -+ } - } -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/time.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/time.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/time.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/time.c 2007-01-09 10:29:18.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: time.c,v 1.5 2004/09/29 06:12:46 starvik Exp $ -+/* $Id: time.c,v 1.10 2007/01/09 09:29:18 starvik Exp $ - * - * linux/arch/cris/arch-v10/kernel/time.c - * -@@ -20,6 +20,7 @@ - #include - #include - #include -+#include - - /* define this if you need to use print_timestamp */ - /* it will make jiffies at 96 hz instead of 100 hz though */ -@@ -202,8 +203,9 @@ - extern void cris_do_profile(struct pt_regs *regs); - - static inline irqreturn_t --timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+timer_interrupt(int irq, void *dev_id) - { -+ struct pt_regs* regs = get_irq_regs(); - /* acknowledge the timer irq */ - - #ifdef USE_CASCADE_TIMERS -@@ -222,9 +224,11 @@ - #endif - - /* reset watchdog otherwise it resets us! */ -- - reset_watchdog(); - -+ /* Update statistics. */ -+ update_process_times(user_mode(regs)); -+ - /* call the real timer interrupt handler */ - - do_timer(1); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/traps.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/traps.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/traps.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/traps.c 2006-12-11 14:04:24.000000000 +0100 -@@ -1,13 +1,10 @@ --/* $Id: traps.c,v 1.4 2005/04/24 18:47:55 starvik Exp $ -+/* -+ * Helper functions for trap handlers - * -- * linux/arch/cris/arch-v10/traps.c -+ * Copyright (C) 2000-2006, Axis Communications AB. - * -- * Heler functions for trap handlers -- * -- * Copyright (C) 2000-2002 Axis Communications AB -- * -- * Authors: Bjorn Wesen -- * Hans-Peter Nilsson -+ * Authors: Bjorn Wesen -+ * Hans-Peter Nilsson - * - */ - -@@ -15,124 +12,118 @@ - #include - #include - --extern int raw_printk(const char *fmt, ...); -- --void --show_registers(struct pt_regs * regs) -+void -+show_registers(struct pt_regs *regs) - { -- /* We either use rdusp() - the USP register, which might not -- correspond to the current process for all cases we're called, -- or we use the current->thread.usp, which is not up to date for -- the current process. Experience shows we want the USP -- register. */ -+ /* -+ * It's possible to use either the USP register or current->thread.usp. -+ * USP might not correspond to the current process for all cases this -+ * function is called, and current->thread.usp isn't up to date for the -+ * current process. Experience shows that using USP is the way to go. -+ */ - unsigned long usp = rdusp(); - -- raw_printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", -- regs->irp, regs->srp, regs->dccr, usp, regs->mof ); -- raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", -+ printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", -+ regs->irp, regs->srp, regs->dccr, usp, regs->mof); -+ -+ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", - regs->r0, regs->r1, regs->r2, regs->r3); -- raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", -+ -+ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", - regs->r4, regs->r5, regs->r6, regs->r7); -- raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", -+ -+ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", - regs->r8, regs->r9, regs->r10, regs->r11); -- raw_printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n", -- regs->r12, regs->r13, regs->orig_r10, regs); -- raw_printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE); -- raw_printk("Process %s (pid: %d, stackpage=%08lx)\n", -+ -+ printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n", -+ regs->r12, regs->r13, regs->orig_r10, (long unsigned)regs); -+ -+ printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE); -+ -+ printk("Process %s (pid: %d, stackpage=%08lx)\n", - current->comm, current->pid, (unsigned long)current); - - /* -- * When in-kernel, we also print out the stack and code at the -- * time of the fault.. -- */ -- if (! user_mode(regs)) { -- int i; -+ * When in-kernel, we also print out the stack and code at the -+ * time of the fault.. -+ */ -+ if (!user_mode(regs)) { -+ int i; - -- show_stack(NULL, (unsigned long*)usp); -+ show_stack(NULL, (unsigned long *)usp); - -- /* Dump kernel stack if the previous dump wasn't one. */ -+ /* -+ * If the previous stack-dump wasn't a kernel one, dump the -+ * kernel stack now. -+ */ - if (usp != 0) -- show_stack (NULL, NULL); -+ show_stack(NULL, NULL); - -- raw_printk("\nCode: "); -- if(regs->irp < PAGE_OFFSET) -- goto bad; -- -- /* Often enough the value at regs->irp does not point to -- the interesting instruction, which is most often the -- _previous_ instruction. So we dump at an offset large -- enough that instruction decoding should be in sync at -- the interesting point, but small enough to fit on a row -- (sort of). We point out the regs->irp location in a -- ksymoops-friendly way by wrapping the byte for that -- address in parentheses. */ -- for(i = -12; i < 12; i++) -- { -- unsigned char c; -- if(__get_user(c, &((unsigned char*)regs->irp)[i])) { --bad: -- raw_printk(" Bad IP value."); -- break; -- } -+ printk("\nCode: "); -+ -+ if (regs->irp < PAGE_OFFSET) -+ goto bad_value; -+ -+ /* -+ * Quite often the value at regs->irp doesn't point to the -+ * interesting instruction, which often is the previous -+ * instruction. So dump at an offset large enough that the -+ * instruction decoding should be in sync at the interesting -+ * point, but small enough to fit on a row. The regs->irp -+ * location is pointed out in a ksymoops-friendly way by -+ * wrapping the byte for that address in parenthesises. -+ */ -+ for (i = -12; i < 12; i++) { -+ unsigned char c; -+ -+ if (__get_user(c, &((unsigned char *)regs->irp)[i])) { -+bad_value: -+ printk(" Bad IP value."); -+ break; -+ } - - if (i == 0) -- raw_printk("(%02x) ", c); -+ printk("(%02x) ", c); - else -- raw_printk("%02x ", c); -- } -- raw_printk("\n"); -- } -+ printk("%02x ", c); -+ } -+ printk("\n"); -+ } - } - --/* Called from entry.S when the watchdog has bitten -- * We print out something resembling an oops dump, and if -- * we have the nice doggy development flag set, we halt here -- * instead of rebooting. -- */ -- --extern void reset_watchdog(void); --extern void stop_watchdog(void); -- -- - void --watchdog_bite_hook(struct pt_regs *regs) -+arch_enable_nmi(void) - { --#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY -- local_irq_disable(); -- stop_watchdog(); -- show_registers(regs); -- while(1) /* nothing */; --#else -- show_registers(regs); --#endif -+ asm volatile ("setf m"); - } - --/* This is normally the 'Oops' routine */ --void --die_if_kernel(const char * str, struct pt_regs * regs, long err) -+extern void (*nmi_handler)(struct pt_regs*); -+void handle_nmi(struct pt_regs* regs) - { -- if(user_mode(regs)) -- return; -- --#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY -- /* This printout might take too long and trigger the -- * watchdog normally. If we're in the nice doggy -- * development mode, stop the watchdog during printout. -- */ -- stop_watchdog(); --#endif -- -- raw_printk("%s: %04lx\n", str, err & 0xffff); -- -- show_registers(regs); -+ if (nmi_handler) -+ nmi_handler(regs); - --#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY -- reset_watchdog(); --#endif -- do_exit(SIGSEGV); -+ /* Wait until nmi is no longer active. (We enable NMI immediately after -+ returning from this function, and we don't want it happening while -+ exiting from the NMI interrupt handler.) */ -+ while(*R_IRQ_MASK0_RD & IO_STATE(R_IRQ_MASK0_RD, nmi_pin, active)); - } - --void arch_enable_nmi(void) -+#ifdef CONFIG_DEBUG_BUGVERBOSE -+void -+handle_BUG(struct pt_regs *regs) - { -- asm volatile("setf m"); -+ struct bug_frame f; -+ unsigned char c; -+ unsigned long irp = regs->irp; -+ -+ if (__copy_from_user(&f, (const void __user *)(irp - 8), sizeof f)) -+ return; -+ if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC) -+ return; -+ if (__get_user(c, f.filename)) -+ f.filename = ""; -+ -+ printk("kernel BUG at %s:%d!\n", f.filename, f.line); - } -+#endif -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksum.S linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksum.S ---- linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksum.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksum.S 2005-08-16 12:38:52.000000000 +0200 -@@ -1,4 +1,4 @@ --/* $Id: checksum.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ -+/* $Id: checksum.S,v 1.2 2005/08/16 10:38:52 edgar Exp $ - * A fast checksum routine using movem - * Copyright (c) 1998-2001 Axis Communications AB - * -@@ -61,8 +61,6 @@ - - ax - addq 0,$r12 -- ax ; do it again, since we might have generated a carry -- addq 0,$r12 - - subq 10*4,$r11 - bge _mloop -@@ -88,10 +86,6 @@ - lsrq 16,$r13 ; r13 = checksum >> 16 - and.d $r9,$r12 ; checksum = checksum & 0xffff - add.d $r13,$r12 ; checksum += r13 -- move.d $r12,$r13 ; do the same again, maybe we got a carry last add -- lsrq 16,$r13 -- and.d $r9,$r12 -- add.d $r13,$r12 - - _no_fold: - cmpq 2,$r11 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksumcopy.S linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksumcopy.S ---- linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksumcopy.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksumcopy.S 2005-08-16 12:38:52.000000000 +0200 -@@ -1,4 +1,4 @@ --/* $Id: checksumcopy.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ -+/* $Id: checksumcopy.S,v 1.2 2005/08/16 10:38:52 edgar Exp $ - * A fast checksum+copy routine using movem - * Copyright (c) 1998, 2001 Axis Communications AB - * -@@ -67,8 +67,6 @@ - - ax - addq 0,$r13 -- ax ; do it again, since we might have generated a carry -- addq 0,$r13 - - subq 10*4,$r12 - bge _mloop -@@ -91,10 +89,6 @@ - lsrq 16,$r9 ; r0 = checksum >> 16 - and.d 0xffff,$r13 ; checksum = checksum & 0xffff - add.d $r9,$r13 ; checksum += r0 -- move.d $r13,$r9 ; do the same again, maybe we got a carry last add -- lsrq 16,$r9 -- and.d 0xffff,$r13 -- add.d $r9,$r13 - - _no_fold: - cmpq 2,$r12 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/lib/dram_init.S linux-2.6.19.2.dev/arch/cris/arch-v10/lib/dram_init.S ---- linux-2.6.19.2.old/arch/cris/arch-v10/lib/dram_init.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/lib/dram_init.S 2006-10-13 14:43:11.000000000 +0200 -@@ -1,4 +1,4 @@ --/* $Id: dram_init.S,v 1.4 2003/09/22 09:21:59 starvik Exp $ -+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ - * - * DRAM/SDRAM initialization - alter with care - * This file is intended to be included from other assembler files -@@ -11,6 +11,9 @@ - * Authors: Mikael Starvik (starvik@axis.com) - * - * $Log: dram_init.S,v $ -+ * Revision 1.5 2006/10/13 12:43:11 starvik -+ * Merge of 2.6.18 -+ * - * Revision 1.4 2003/09/22 09:21:59 starvik - * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx - * so we need to mask off 12 bits. -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/mm/fault.c linux-2.6.19.2.dev/arch/cris/arch-v10/mm/fault.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/mm/fault.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/mm/fault.c 2006-12-11 12:32:10.000000000 +0100 -@@ -73,7 +73,7 @@ - /* leave it to the MM system fault handler */ - if (miss) - do_page_fault(address, regs, 0, writeac); -- else -+ else - do_page_fault(address, regs, 1, we); - - /* Reload TLB with new entry to avoid an extra miss exception. -@@ -84,12 +84,13 @@ - local_irq_disable(); - pmd = (pmd_t *)(pgd + pgd_index(address)); - if (pmd_none(*pmd)) -- return; -+ goto exit; - pte = *pte_offset_kernel(pmd, address); - if (!pte_present(pte)) -- return; -+ goto exit; - *R_TLB_SELECT = select; - *R_TLB_HI = cause; - *R_TLB_LO = pte_val(pte); -+exit: - local_irq_restore(flags); - } -diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/mm/tlb.c linux-2.6.19.2.dev/arch/cris/arch-v10/mm/tlb.c ---- linux-2.6.19.2.old/arch/cris/arch-v10/mm/tlb.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v10/mm/tlb.c 2006-08-07 12:08:35.000000000 +0200 -@@ -179,23 +179,26 @@ - switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) - { -- /* make sure we have a context */ -+ if (prev != next) { -+ /* make sure we have a context */ -+ get_mmu_context(next); -+ -+ /* remember the pgd for the fault handlers -+ * this is similar to the pgd register in some other CPU's. -+ * we need our own copy of it because current and active_mm -+ * might be invalid at points where we still need to derefer -+ * the pgd. -+ */ - -- get_mmu_context(next); -+ per_cpu(current_pgd, smp_processor_id()) = next->pgd; - -- /* remember the pgd for the fault handlers -- * this is similar to the pgd register in some other CPU's. -- * we need our own copy of it because current and active_mm -- * might be invalid at points where we still need to derefer -- * the pgd. -- */ -- -- per_cpu(current_pgd, smp_processor_id()) = next->pgd; -- -- /* switch context in the MMU */ -+ /* switch context in the MMU */ - -- D(printk("switching mmu_context to %d (%p)\n", next->context, next)); -+ D(printk("switching mmu_context to %d (%p)\n", -+ next->context, next)); - -- *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT, page_id, next->context.page_id); -+ *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT, -+ page_id, next->context.page_id); -+ } - } - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/Kconfig linux-2.6.19.2.dev/arch/cris/arch-v32/Kconfig ---- linux-2.6.19.2.old/arch/cris/arch-v32/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/Kconfig 2007-01-09 10:29:18.000000000 +0100 -@@ -1,23 +1,66 @@ -+source drivers/cpufreq/Kconfig -+ - config ETRAX_DRAM_VIRTUAL_BASE - hex - depends on ETRAX_ARCH_V32 - default "c0000000" - --config ETRAX_LED1G -- string "First green LED bit" -+choice -+ prompt "Nbr of Ethernet LED groups" - depends on ETRAX_ARCH_V32 -+ default ETRAX_NBR_LED_GRP_ONE -+ help -+ Select how many Ethernet LED groups that can be used. Usually one per Ethernet -+ interface is a good choice. -+ -+config ETRAX_NBR_LED_GRP_ZERO -+ bool "Use zero LED groups" -+ help -+ Select this if you do not want any Ethernet LEDs. -+ -+config ETRAX_NBR_LED_GRP_ONE -+ bool "Use one LED group" -+ help -+ Select this if you want one Ethernet LED group. This LED group can be used for -+ one or more Ethernet interfaces. However, it is recomended that each Ethernet -+ interface use a dedicated LED group. -+ -+config ETRAX_NBR_LED_GRP_TWO -+ bool "Use two LED groups" -+ help -+ Select this if you want two Ethernet LED groups. This is the best choice if you -+ have more than one Ethernet interface and would like to have separate LEDs for -+ the interfaces. -+ -+endchoice -+ -+config ETRAX_LED_G_NET0 -+ string "Ethernet LED group 0 green LED bit" -+ depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) - default "PA3" - help -- Bit to use for the first green LED (network LED). -- Most Axis products use bit A3 here. -+ Bit to use for the green LED in Ethernet LED group 0. - --config ETRAX_LED1R -- string "First red LED bit" -- depends on ETRAX_ARCH_V32 -+config ETRAX_LED_R_NET0 -+ string "Ethernet LED group 0 red LED bit" -+ depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) - default "PA4" - help -- Bit to use for the first red LED (network LED). -- Most Axis products use bit A4 here. -+ Bit to use for the red LED in Ethernet LED group 0. -+ -+config ETRAX_LED_G_NET1 -+ string "Ethernet group 1 green LED bit" -+ depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO -+ default "" -+ help -+ Bit to use for the green LED in Ethernet LED group 1. -+ -+config ETRAX_LED_R_NET1 -+ string "Ethernet group 1 red LED bit" -+ depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO -+ default "" -+ help -+ Bit to use for the red LED in Ethernet LED group 1. - - config ETRAX_LED2G - string "Second green LED bit" -@@ -294,3 +337,22 @@ - help - Configures the initial data for the general port E bits. Most - products should use 00000 here. -+ -+config ETRAX_DEF_GIO_PV_OE -+ hex "GIO_PV_OE" -+ depends on ETRAX_VIRTUAL_GPIO -+ default "0000" -+ help -+ Configures the direction of virtual general port V bits. 1 is out, -+ 0 is in. This is often totally different depending on the product -+ used. These bits are used for all kinds of stuff. If you don't know -+ what to use, it is always safe to put all as inputs, although -+ floating inputs isn't good. -+ -+config ETRAX_DEF_GIO_PV_OUT -+ hex "GIO_PV_OUT" -+ depends on ETRAX_VIRTUAL_GPIO -+ default "0000" -+ help -+ Configures the initial data for the virtual general port V bits. -+ Most products should use 0000 here. -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/boot/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/Makefile 2006-11-29 17:05:41.000000000 +0100 -@@ -1,14 +1,21 @@ - # - # arch/cris/arch-v32/boot/Makefile - # --target = $(target_boot_dir) --src = $(src_boot_dir) - --zImage: compressed/vmlinuz -+OBJCOPY = objcopy-cris -+OBJCOPYFLAGS = -O binary -R .note -R .comment - --compressed/vmlinuz: $(objtree)/vmlinux -- @$(MAKE) -f $(src)/compressed/Makefile $(objtree)/vmlinuz -+subdir- := compressed rescue -+targets := Image - --clean: -- rm -f zImage tools/build compressed/vmlinux.out -- @$(MAKE) -f $(src)/compressed/Makefile clean -+$(obj)/Image: vmlinux FORCE -+ $(call if_changed,objcopy) -+ @echo ' Kernel: $@ is ready' -+ -+$(obj)/compressed/vmlinux: $(obj)/Image FORCE -+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@ -+ $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin -+ -+$(obj)/zImage: $(obj)/compressed/vmlinux -+ @cp $< $@ -+ @echo ' Kernel: $@ is ready' -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/Makefile 2006-11-29 17:05:42.000000000 +0100 -@@ -1,41 +1,29 @@ - # --# lx25/arch/cris/arch-v32/boot/compressed/Makefile -+# arch/cris/arch-v32/boot/compressed/Makefile - # --# create a compressed vmlinux image from the original vmlinux files and romfs --# -- --target = $(target_compressed_dir) --src = $(src_compressed_dir) - - CC = gcc-cris -mlinux -march=v32 -I $(TOPDIR)/include - CFLAGS = -O2 - LD = gcc-cris -mlinux -march=v32 -nostdlib -+LDFLAGS = -T $(obj)/decompress.ld -+obj-y = head.o misc.o -+OBJECTS = $(obj)/head.o $(obj)/misc.o - OBJCOPY = objcopy-cris - OBJCOPYFLAGS = -O binary --remove-section=.bss --OBJECTS = $(target)/head.o $(target)/misc.o -- --# files to compress --SYSTEM = $(objtree)/vmlinux.bin -- --all: vmlinuz -- --$(target)/decompress.bin: $(OBJECTS) -- $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS) -- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin - --$(objtree)/vmlinuz: $(target) piggy.img $(target)/decompress.bin -- cat $(target)/decompress.bin piggy.img > $(objtree)/vmlinuz -- rm -f piggy.img -- cp $(objtree)/vmlinuz $(src) -+quiet_cmd_image = BUILD $@ -+cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ - --$(target)/head.o: $(src)/head.S -- $(CC) -D__ASSEMBLY__ -c $< -o $@ -+targets := vmlinux piggy.gz decompress.o decompress.bin - --# gzip the kernel image -+$(obj)/decompress.o: $(OBJECTS) FORCE -+ $(call if_changed,ld) - --piggy.img: $(SYSTEM) -- cat $(SYSTEM) | gzip -f -9 > piggy.img -+$(obj)/decompress.bin: $(obj)/decompress.o FORCE -+ $(call if_changed,objcopy) - --clean: -- rm -f piggy.img $(objtree)/vmlinuz vmlinuz.o decompress.o decompress.bin $(OBJECTS) -+$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE -+ $(call if_changed,image) - -+$(obj)/piggy.gz: $(obj)/../Image FORCE -+ $(call if_changed,gzip) -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/README linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/README ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/README 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/README 2003-08-21 11:37:03.000000000 +0200 -@@ -5,14 +5,14 @@ - This can be slightly confusing because it's a process with many steps. - - The kernel object built by the arch/etrax100/Makefile, vmlinux, is split --by that makefile into text and data binary files, vmlinux.text and -+by that makefile into text and data binary files, vmlinux.text and - vmlinux.data. - - Those files together with a ROM filesystem can be catted together and - burned into a flash or executed directly at the DRAM origin. - - They can also be catted together and compressed with gzip, which is what --happens in this makefile. Together they make up piggy.img. -+happens in this makefile. Together they make up piggy.img. - - The decompressor is built into the file decompress.o. It is turned into - the binary file decompress.bin, which is catted together with piggy.img -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/decompress.ld linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/decompress.ld ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/decompress.ld 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/decompress.ld 2003-08-21 11:57:56.000000000 +0200 -@@ -1,7 +1,7 @@ - /*#OUTPUT_FORMAT(elf32-us-cris) */ - OUTPUT_ARCH (crisv32) - --MEMORY -+MEMORY - { - dram : ORIGIN = 0x40700000, - LENGTH = 0x00100000 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/head.S linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/head.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/head.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/head.S 2007-01-09 10:29:20.000000000 +0100 -@@ -2,19 +2,19 @@ - * Code that sets up the DRAM registers, calls the - * decompressor to unpack the piggybacked kernel, and jumps. - * -- * Copyright (C) 1999 - 2003, Axis Communications AB -+ * Copyright (C) 1999 - 2006, Axis Communications AB - */ - - #define ASSEMBLER_MACROS_ONLY - #include - #include - #include -- -+ - #define RAM_INIT_MAGIC 0x56902387 - #define COMMAND_LINE_MAGIC 0x87109563 - - ;; Exported symbols -- -+ - .globl input_data - - .text -@@ -29,53 +29,16 @@ - REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 - move.d $r0, [$r1] - -- ;; If booting from NAND flash we first have to copy some -- ;; data from NAND flash to internal RAM to get the code -- ;; that initializes the SDRAM. Lets copy 20 KB. This -- ;; code executes at 0x38010000 if booting from NAND and -- ;; we are guaranted that at least 0x200 bytes are good so -- ;; lets start from there. The first 8192 bytes in the nand -- ;; flash is spliced with zeroes and is thus 16384 bytes. -- move.d 0x38010200, $r10 -- move.d 0x14200, $r11 ; Start offset in NAND flash 0x10200 + 16384 -- move.d 0x5000, $r12 ; Length of copy -- -- ;; Before this code the tools add a partitiontable so the PC -- ;; has an offset from the linked address. --offset1: -- lapcq ., $r13 ; get PC -- add.d first_copy_complete-offset1, $r13 -- --#include "../../lib/nand_init.S" -- --first_copy_complete: -- ;; Initialze the DRAM registers. -+ ;; Initialize the DRAM registers. - cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? - beq dram_init_finished - nop - - #include "../../lib/dram_init.S" -- -+ - dram_init_finished: -- lapcq ., $r13 ; get PC -- add.d second_copy_complete-dram_init_finished, $r13 -- -- move.d REG_ADDR(config, regi_config, r_bootsel), $r0 -- move.d [$r0], $r0 -- and.d REG_MASK(config, r_bootsel, boot_mode), $r0 -- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 -- bne second_copy_complete ; No NAND boot -- nop -- -- ;; Copy 2MB from NAND flash to SDRAM (at 2-4MB into the SDRAM) -- move.d 0x40204000, $r10 -- move.d 0x8000, $r11 -- move.d 0x200000, $r12 -- ba copy_nand_to_ram -- nop --second_copy_complete: -- -- ;; Initiate the PA port. -+ -+ ;; Initiate the GIO ports. - move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 - move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 - move.d $r0, [$r1] -@@ -84,57 +47,74 @@ - move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 - move.d $r0, [$r1] - -+ move.d CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0 -+ move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r1 -+ move.d $r0, [$r1] -+ -+ move.d CONFIG_ETRAX_DEF_GIO_PB_OE, $r0 -+ move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r1 -+ move.d $r0, [$r1] -+ -+ move.d CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0 -+ move.d REG_ADDR(gio, regi_gio, rw_pc_dout), $r1 -+ move.d $r0, [$r1] -+ -+ move.d CONFIG_ETRAX_DEF_GIO_PC_OE, $r0 -+ move.d REG_ADDR(gio, regi_gio, rw_pc_oe), $r1 -+ move.d $r0, [$r1] -+ -+ move.d CONFIG_ETRAX_DEF_GIO_PD_OUT, $r0 -+ move.d REG_ADDR(gio, regi_gio, rw_pd_dout), $r1 -+ move.d $r0, [$r1] -+ -+ move.d CONFIG_ETRAX_DEF_GIO_PD_OE, $r0 -+ move.d REG_ADDR(gio, regi_gio, rw_pd_oe), $r1 -+ move.d $r0, [$r1] -+ -+ move.d CONFIG_ETRAX_DEF_GIO_PE_OUT, $r0 -+ move.d REG_ADDR(gio, regi_gio, rw_pe_dout), $r1 -+ move.d $r0, [$r1] -+ -+ move.d CONFIG_ETRAX_DEF_GIO_PE_OE, $r0 -+ move.d REG_ADDR(gio, regi_gio, rw_pe_oe), $r1 -+ move.d $r0, [$r1] -+ - ;; Setup the stack to a suitably high address. -- ;; We assume 8 MB is the minimum DRAM and put -+ ;; We assume 8 MB is the minimum DRAM and put - ;; the SP at the top for now. - - move.d 0x40800000, $sp - -- ;; Figure out where the compressed piggyback image is -- ;; in the flash (since we wont try to copy it to DRAM -- ;; before unpacking). It is at _edata, but in flash. -+ ;; Figure out where the compressed piggyback image is. -+ ;; It is either in [NOR] flash (we don't want to copy it -+ ;; to DRAM before unpacking), or copied to DRAM -+ ;; by the [NAND] flash boot loader. -+ ;; The piggyback image is at _edata, but relative to where the -+ ;; image is actually located in memory, not where it is linked -+ ;; (the decompressor is linked at 0x40700000+ and runs there). - ;; Use (_edata - herami) as offset to the current PC. - -- move.d REG_ADDR(config, regi_config, r_bootsel), $r0 -- move.d [$r0], $r0 -- and.d REG_MASK(config, r_bootsel, boot_mode), $r0 -- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 -- beq hereami2 -- nop --hereami: -+hereami: - lapcq ., $r5 ; get PC - and.d 0x7fffffff, $r5 ; strip any non-cache bit -- move.d $r5, $r0 ; save for later - flash address of 'herami' -+ move.d $r5, $r0 ; source address of 'herami' - add.d _edata, $r5 - sub.d hereami, $r5 ; r5 = flash address of '_edata' - move.d hereami, $r1 ; destination -- ba 2f -- nop --hereami2: -- lapcq ., $r5 ; get PC -- and.d 0x00ffffff, $r5 ; strip any non-cache bit -- move.d $r5, $r6 -- or.d 0x40200000, $r6 -- move.d $r6, $r0 ; save for later - flash address of 'herami' -- add.d _edata, $r5 -- sub.d hereami2, $r5 ; r5 = flash address of '_edata' -- add.d 0x40200000, $r5 -- move.d hereami2, $r1 ; destination --2: -- ;; Copy text+data to DRAM - -+ ;; Copy text+data to DRAM -+ - move.d _edata, $r2 ; end destination --1: move.w [$r0+], $r3 -- move.w $r3, [$r1+] -- cmp.d $r2, $r1 -+1: move.w [$r0+], $r3 ; from herami+ source -+ move.w $r3, [$r1+] ; to hereami+ destination (linked address) -+ cmp.d $r2, $r1 ; finish when destination == _edata - bcs 1b - nop -- -- move.d input_data, $r0 ; for the decompressor -+ move.d input_data, $r0 ; for the decompressor - move.d $r5, [$r0] ; for the decompressor - - ;; Clear the decompressors BSS (between _edata and _end) -- -+ - moveq 0, $r0 - move.d _edata, $r1 - move.d _end, $r2 -@@ -144,40 +124,47 @@ - nop - - ;; Save command line magic and address. -- move.d _cmd_line_magic, $r12 -- move.d $r10, [$r12] -- move.d _cmd_line_addr, $r12 -- move.d $r11, [$r12] -- -+ move.d _cmd_line_magic, $r0 -+ move.d $r10, [$r0] -+ move.d _cmd_line_addr, $r0 -+ move.d $r11, [$r0] -+ -+ ;; Save boot source indicator -+ move.d _boot_source, $r0 -+ move.d $r12, [$r0] -+ - ;; Do the decompression and save compressed size in _inptr - - jsr decompress_kernel - nop - -+ ;; Restore boot source indicator -+ move.d _boot_source, $r12 -+ move.d [$r12], $r12 -+ - ;; Restore command line magic and address. - move.d _cmd_line_magic, $r10 - move.d [$r10], $r10 - move.d _cmd_line_addr, $r11 - move.d [$r11], $r11 -- -+ - ;; Put start address of root partition in r9 so the kernel can use it - ;; when mounting from flash - move.d input_data, $r0 - move.d [$r0], $r9 ; flash address of compressed kernel - move.d inptr, $r0 - add.d [$r0], $r9 ; size of compressed kernel -- cmp.d 0x40200000, $r9 -- blo enter_kernel -- nop -- sub.d 0x40200000, $r9 -- add.d 0x4000, $r9 -- --enter_kernel: -+ cmp.d 0x40000000, $r9 ; image in DRAM ? -+ blo enter_kernel ; no, must be [NOR] flash, jump -+ nop ; delay slot -+ and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M -+ -+enter_kernel: - ;; Enter the decompressed kernel - move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized - jump 0x40004000 ; kernel is linked to this address - nop -- -+ - .data - - input_data: -@@ -185,8 +172,8 @@ - _cmd_line_magic: - .dword 0 - _cmd_line_addr: -+ .dword 0 -+_boot_source: - .dword 0 --is_nand_boot: -- .dword 0 -- -+ - #include "../../lib/hw_settings.S" -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/misc.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/misc.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/misc.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/misc.c 2006-11-03 11:35:51.000000000 +0100 -@@ -1,15 +1,15 @@ - /* - * misc.c - * -- * $Id: misc.c,v 1.8 2005/04/24 18:34:29 starvik Exp $ -- * -- * This is a collection of several routines from gzip-1.0.3 -+ * $Id: misc.c,v 1.12 2006/11/03 10:35:51 pkj Exp $ -+ * -+ * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * adoptation for Linux/CRIS Axis Communications AB, 1999 -- * -+ * - */ - - /* where the piggybacked kernel image expects itself to live. -@@ -20,11 +20,11 @@ - - #define KERNEL_LOAD_ADR 0x40004000 - -- - #include - #include - #include - #include -+#include - - /* - * gzip declarations -@@ -66,8 +66,8 @@ - #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ - #define RESERVED 0xC0 /* bit 6,7: reserved */ - --#define get_byte() inbuf[inptr++] -- -+#define get_byte() inbuf[inptr++] -+ - /* Diagnostic functions */ - #ifdef DEBUG - # define Assert(cond,msg) {if(!(cond)) error(msg);} -@@ -96,20 +96,20 @@ - static long bytes_out = 0; - static uch *output_data; - static unsigned long output_ptr = 0; -- -+ - static void *malloc(int size); - static void free(void *where); - static void error(char *m); - static void gzip_mark(void **); - static void gzip_release(void **); -- -+ - static void puts(const char *); - - /* the "heap" is put directly after the BSS ends, at end */ -- -+ - extern int _end; - static long free_mem_ptr = (long)&_end; -- -+ - #include "../../../../../lib/inflate.c" - - static void *malloc(int size) -@@ -152,7 +152,7 @@ - rs = REG_RD(ser, regi_ser, rs_stat_din); - } - while (!rs.tr_rdy);/* Wait for tranceiver. */ -- -+ - REG_WR(ser, regi_ser, rw_dout, dout); - } - -@@ -209,9 +209,9 @@ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; -- -+ - in = window; -- out = &output_data[output_ptr]; -+ out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); -@@ -225,9 +225,9 @@ - static void - error(char *x) - { -- puts("\n\n"); -+ puts("\r\n\n"); - puts(x); -- puts("\n\n -- System halted\n"); -+ puts("\r\n\n -- System halted\n"); - - while(1); /* Halt */ - } -@@ -246,13 +246,13 @@ - reg_ser_rw_rec_ctrl rec_ctrl; - reg_ser_rw_tr_baud_div tr_baud; - reg_ser_rw_rec_baud_div rec_baud; -- -+ - /* Turn off XOFF. */ - xoff = REG_RD(ser, regi_ser, rw_xoff); -- -+ - xoff.chr = 0; - xoff.automatic = regk_ser_no; -- -+ - REG_WR(ser, regi_ser, rw_xoff, xoff); - - /* Set baudrate and stopbits. */ -@@ -260,19 +260,21 @@ - rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); - tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div); - rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div); -- -+ - tr_ctrl.stop_bits = 1; /* 2 stop bits. */ -- -- /* -- * The baudrate setup is a bit fishy, but in the end the tranceiver is -- * set to 4800 and the receiver to 115200. The magic value is -- * 29.493 MHz. -+ tr_ctrl.en = 1; /* enable transmitter */ -+ rec_ctrl.en = 1; /* enabler receiver */ -+ -+ /* -+ * The baudrate setup used to be a bit fishy, but now transmitter and -+ * receiver are both set to the intended baud rate, 115200. -+ * The magic value is 29.493 MHz. - */ - tr_ctrl.base_freq = regk_ser_f29_493; - rec_ctrl.base_freq = regk_ser_f29_493; -- tr_baud.div = (29493000 / 8) / 4800; -+ tr_baud.div = (29493000 / 8) / 115200; - rec_baud.div = (29493000 / 8) / 115200; -- -+ - REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); - REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud); - REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); -@@ -283,22 +285,28 @@ - decompress_kernel() - { - char revision; -- -+ reg_pinmux_rw_hwprot hwprot; -+ - /* input_data is set in head.S */ - inbuf = input_data; -- -+ -+ hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); - #ifdef CONFIG_ETRAX_DEBUG_PORT0 - serial_setup(regi_ser0); - #endif - #ifdef CONFIG_ETRAX_DEBUG_PORT1 -+ hwprot.ser1 = regk_pinmux_yes; - serial_setup(regi_ser1); - #endif - #ifdef CONFIG_ETRAX_DEBUG_PORT2 -+ hwprot.ser2 = regk_pinmux_yes; - serial_setup(regi_ser2); - #endif - #ifdef CONFIG_ETRAX_DEBUG_PORT3 -+ hwprot.ser3 = regk_pinmux_yes; - serial_setup(regi_ser3); - #endif -+ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); - - setup_normal_output_buffer(); - -@@ -307,11 +315,11 @@ - __asm__ volatile ("move $vr,%0" : "=rm" (revision)); - if (revision < 32) - { -- puts("You need an ETRAX FS to run Linux 2.6/crisv32.\n"); -+ puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n"); - while(1); - } - -- puts("Uncompressing Linux...\n"); -+ puts("Uncompressing Linux...\r\n"); - gunzip(); -- puts("Done. Now booting the kernel.\n"); -+ puts("Done. Now booting the kernel.\r\n"); - } -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/Makefile 2007-01-17 14:24:50.000000000 +0100 -@@ -1,36 +1,29 @@ - # --# Makefile for rescue code -+# Makefile for rescue (bootstrap) code - # --target = $(target_rescue_dir) --src = $(src_rescue_dir) - - CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) - CFLAGS = -O2 --LD = gcc-cris -mlinux -march=v32 -nostdlib -+LD = gcc-cris -mlinux -march=v32 -nostdlib -+LDFLAGS = -T $(obj)/rescue.ld -+LDPOSTFLAGS = -lgcc - OBJCOPY = objcopy-cris - OBJCOPYFLAGS = -O binary --remove-section=.bss -- --all: $(target)/rescue.bin -- --rescue: rescue.bin -- # do nothing -- --$(target)/rescue.bin: $(target) $(target)/head.o -- $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o -- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin -- cp -p $(target)/rescue.bin $(objtree) -- --$(target): -- mkdir -p $(target) -- --$(target)/head.o: $(src)/head.S -- $(CC) -D__ASSEMBLY__ -c $< -o $*.o -- --clean: -- rm -f $(target)/*.o $(target)/*.bin -- --fastdep: -- --modules: -- --modules-install: -+obj-y = head.o bootload.o crisv32_nand.o nand_base.o nand_ids.o nand_ecc.o \ -+ lib.o -+OBJECTS = $(obj)/head.o $(obj)/bootload.o \ -+ $(obj)/crisv32_nand.o $(obj)/nand_base.o \ -+ $(obj)/nand_ids.o $(obj)/nand_ecc.o \ -+ $(obj)/lib.o $(obj)/../../lib/lib.a -+ -+targets := rescue.o rescue.bin -+ -+quiet_cmd_ldlibgcc = LD $@ -+cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@ -+ -+$(obj)/rescue.o: $(OBJECTS) FORCE -+ $(call if_changed,ldlibgcc) -+ -+$(obj)/rescue.bin: $(obj)/rescue.o FORCE -+ $(call if_changed,objcopy) -+ cp -p $(obj)/rescue.bin $(objtree) -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/bootload.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/bootload.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/bootload.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/bootload.c 2006-11-28 11:05:39.000000000 +0100 -@@ -0,0 +1,277 @@ -+/* -+ * bootload.c -+ * Simple boot loader for NAND chips on Etrax FS -+ * -+ * $Id: bootload.c,v 1.8 2006/11/28 10:05:39 ricardw Exp $ -+ * -+ */ -+ -+#include -+#include -+ -+#include "mtd.h" -+#include "nand.h" -+ -+#include -+#include -+#include -+ -+#include "lib.h" -+ -+#define BOOT_ADDR (CONFIG_ETRAX_PTABLE_SECTOR + 0x40200000) -+ -+/* bits for nand_rw() `cmd'; or together as needed */ -+ -+#define NANDRW_READ 0x01 -+#define NANDRW_WRITE 0x00 -+#define NANDRW_JFFS2 0x02 -+#define NANDRW_JFFS2_SKIP 0x04 -+ -+#define ROUND_DOWN(value, boundary) ((value) & (~((boundary)-1))) -+ -+/* set $r8 to RAM_INIT_MAGIC, $r12 to NAND_BOOT_MAGIC then jump */ -+#define BOOT(addr) __asm__ volatile (" \ -+ move.d 0x56902387, $r8\n\ -+ move.d 0x9A9DB001, $r12\n\ -+ jump %0\n\ -+ nop\n\ -+ " : : "r" (addr)) -+ -+#define D(x) -+ -+extern struct mtd_info *crisv32_nand_flash_probe(void); -+ -+extern int _end, _bss, _edata; -+ -+/* -+ * NAND read/write from U-Boot 1.4.4 -+ * Modified for newer mtd and use of mtd interface instead of nand directly. -+ * -+ * cmd: 0: NANDRW_WRITE write, fail on bad block -+ * 1: NANDRW_READ read, fail on bad block -+ * 2: NANDRW_WRITE | NANDRW_JFFS2 write, skip bad blocks -+ * 3: NANDRW_READ | NANDRW_JFFS2 read, data all 0xff for bad blocks -+ * 7: NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP read, skip bad blocks -+ */ -+static int -+nand_rw (struct mtd_info* mtd, int cmd, -+ size_t start, size_t len, -+ size_t *retlen, u_char * buf) -+{ -+ int ret = 0, n, total = 0; -+ -+ /* eblk (once set) is the start of the erase block containing the -+ * data being processed. -+ */ -+ size_t eblk = ~0; /* force mismatch on first pass */ -+ size_t erasesize = mtd->erasesize; -+ -+ while (len) { -+ if ((start & (-erasesize)) != eblk) { -+ /* have crossed into new erase block, deal with -+ * it if it is marked bad. -+ */ -+ eblk = start & (-erasesize); /* start of block */ -+ D( -+ puts("New block "); -+ putx(eblk); -+ putnl(); -+ ) -+ if (mtd->block_isbad(mtd, eblk)) { -+ if (cmd == (NANDRW_READ | NANDRW_JFFS2)) { -+ while (len > 0 && -+ start - eblk < erasesize) { -+ *(buf++) = 0xff; -+ ++start; -+ ++total; -+ --len; -+ } -+ continue; -+ } else if (cmd == (NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP)) { -+ start += erasesize; -+ continue; -+ } else if (cmd == (NANDRW_WRITE | NANDRW_JFFS2)) { -+ /* skip bad block */ -+ start += erasesize; -+ continue; -+ } else { -+ ret = 1; -+ break; -+ } -+ } -+ } -+ /* The ECC will not be calculated correctly if -+ less than 512 is written or read */ -+ /* Is request at least 512 bytes AND it starts on a proper boundry */ -+ if((start != ROUND_DOWN(start, 0x200)) || (len < 0x200)) -+ puts("Warning block writes should be at least 512 bytes and start on a 512 byte boundry\r\n"); -+ -+#if 0 -+ buf = (void *) 0x38008000; /* to fixed address, for testing */ -+#endif -+ -+ if (cmd & NANDRW_READ) { -+ ret = mtd->read_ecc(mtd, start, -+ min(len, eblk + erasesize - start), -+ (size_t *)&n, (u_char*)buf, -+ NULL, NULL); -+ } else { -+ ret = mtd->write_ecc(mtd, start, -+ min(len, eblk + erasesize - start), -+ (size_t *)&n, (u_char*)buf, -+ NULL, NULL); -+ } -+ -+ if (ret) { -+ break; -+ } -+ -+ start += n; -+ buf += n; -+ total += n; -+ len -= n; -+ } -+ if (retlen) -+ *retlen = total; -+ -+ return ret; -+} -+ -+ -+void -+bootload() -+{ -+ char revision; -+ struct mtd_info *mtd; -+ -+ serial_init(); -+ -+ __asm__ volatile ("move $vr,%0" : "=rm" (revision)); -+ if (revision < 32) -+ { -+ puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n"); -+ while(1); -+ } -+ -+ puts("\r\n\nETRAX FS NAND boot loader\r\n"); -+ puts("=========================\r\n"); -+ puts("Rev 1, " __DATE__ " " __TIME__ "\r\n"); -+ -+ puts("CPU revision: "); -+ putx(revision); -+ putnl(); -+ -+ puts("Bootloader main at ") ; -+ putx((int) bootload); -+ putnl(); -+ -+ puts("Data end: "); -+ putx((long) &_edata); -+ putnl(); -+ -+ puts("Bss: "); -+ putx((long) &_bss); -+ putnl(); -+ -+ puts("Heap: "); -+ putx((long) &_end); -+ putnl(); -+ -+#if 0 /* loop calibration */ -+ volatile int i; -+ puts ("10000 loops..."); -+ for (i = 0; i < 10000; i++) -+ udelay(1000); -+ puts("done\r\n"); -+#endif -+ -+ puts("Identifying nand chip...\r\n"); -+ mtd = crisv32_nand_flash_probe(); -+ puts("Done.\r\n"); -+ -+ if (mtd) { -+ puts("Chip identified. "); -+#if 0 /* print chip parameters */ -+ if (mtd->name) -+ puts(mtd->name); -+ -+ puts("\r\ntype: "); -+ putx(mtd->type); -+ puts("\r\nflags: "); -+ putx(mtd->flags); -+ puts("\r\nsize: "); -+ putx(mtd->size); -+ puts("\r\nerasesize: "); -+ putx(mtd->erasesize); -+ puts("\r\noobblock: "); -+ putx(mtd->oobblock); -+ puts("\r\noobsize: "); -+ putx(mtd->oobsize); -+ puts("\r\necctype: "); -+ putx(mtd->ecctype); -+ puts("\r\neccsize: "); -+ putx(mtd->eccsize); -+#endif -+ putnl(); -+ -+ puts("Bad blocks:\r\n"); -+ -+ int i; -+ for (i = 0; i < mtd->size; i += mtd->erasesize) { -+ if (mtd->block_isbad(mtd, i)) { -+ putx(i); -+ putnl(); -+ } -+ } -+ -+#if 0 /* print oob parameters */ -+ puts("Oob info:\r\n"); -+ puts("useecc: "); -+ putx(mtd->oobinfo.useecc); -+ puts("\r\neccbytes: "); -+ putx(mtd->oobinfo.eccbytes); -+ puts("\r\neccpos: "); -+ for (i = 0; i < mtd->oobinfo.eccbytes; i++) { -+ putx(mtd->oobinfo.eccpos[i]); -+ putc(' '); -+ } -+ putnl(); -+#endif -+ -+ puts("Bootload in progress..."); -+ int res, copied; -+ res = nand_rw(mtd, -+ NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP, -+ CONFIG_ETRAX_PTABLE_SECTOR, -+ 0x200000, /* 2 megs */ -+ &copied, -+ (void *) BOOT_ADDR); -+ -+ puts("complete, status "); -+ putx(res); -+ puts(", loaded "); -+ putx(copied); -+ puts(" bytes\r\n"); -+#if 1 -+ puts("Data in DRAM:\r\n"); -+ putx(* (int *) (BOOT_ADDR + 0)); -+ putc(' '); -+ putx(* (int *) (BOOT_ADDR + 4)); -+ putc(' '); -+ putx(* (int *) (BOOT_ADDR + 8)); -+ putnl(); -+#endif -+ -+ if (res) -+ error("Corrupt data in NAND flash."); -+ else -+ { -+ puts("Booting...\r\n"); -+ BOOT(BOOT_ADDR); -+ } -+ } else -+ error("No NAND flash chip found to boot from."); -+ -+ while (1) -+ ; /* hang around until hell freezes over */ -+} -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/crisv32_nand.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/crisv32_nand.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/crisv32_nand.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/crisv32_nand.c 2006-11-21 15:40:02.000000000 +0100 -@@ -0,0 +1,157 @@ -+/* -+ * Taken from arch/cris/arch-v32/drivers/nandflash.c -+ * and modified to use for boot loader. -+ * -+ * Copyright (c) 2004 -+ * -+ * Derived from drivers/mtd/nand/spia.c -+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) -+ * -+ * $Id: crisv32_nand.c,v 1.2 2006/11/21 14:40:02 ricardw Exp $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include "mtd.h" -+#include "nand.h" -+ -+#if 0 -+#include -+#endif -+ -+#if 0 -+#include -+#endif -+ -+#include -+#include -+#include -+#include -+ -+#include "lib.h" -+ -+/* Hardware */ -+ -+#define CE_BIT 4 -+#define CLE_BIT 5 -+#define ALE_BIT 6 -+#define BY_BIT 7 -+ -+#define NAND_RD_ADDR 0x90000000 /* read address */ -+#define NAND_WR_ADDR 0x94000000 /* write address */ -+ -+static struct mtd_info *crisv32_mtd = NULL; -+ -+/* -+ * hardware specific access to control-lines -+ */ -+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd) -+{ -+ unsigned long flags; -+ reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout); -+ -+ switch(cmd){ -+ case NAND_CTL_SETCLE: -+ dout.data |= (1<> BY_BIT); -+} -+ -+/* -+ * Main initialization routine -+ */ -+struct mtd_info* crisv32_nand_flash_probe (void) -+{ -+ reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core, rw_grp3_cfg); -+ reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe); -+ struct nand_chip *this; -+ int err = 0; -+ -+ /* Allocate memory for MTD device structure and private data */ -+ crisv32_mtd = malloc (sizeof(struct mtd_info) + sizeof (struct nand_chip)); -+ if (!crisv32_mtd) { -+ puts ("Unable to allocate CRISv32 NAND MTD device structure.\r\n"); -+ err = -ENOMEM; -+ return NULL; -+ } -+ -+ /* Get pointer to private data */ -+ this = (struct nand_chip *) (&crisv32_mtd[1]); -+ -+ pa_oe.oe |= 1 << CE_BIT; -+ pa_oe.oe |= 1 << ALE_BIT; -+ pa_oe.oe |= 1 << CLE_BIT; -+ pa_oe.oe &= ~ (1 << BY_BIT); -+ REG_WR(gio, regi_gio, rw_pa_oe, pa_oe); -+ -+ bif_cfg.gated_csp0 = regk_bif_core_rd; -+ bif_cfg.gated_csp1 = regk_bif_core_wr; -+ REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg); -+ -+ /* Initialize structures */ -+ memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info)); -+ memset((char *) this, 0, sizeof(struct nand_chip)); -+ -+ /* Link the private data with the MTD structure */ -+ crisv32_mtd->priv = this; -+ -+ /* Set address of NAND IO lines */ -+ this->IO_ADDR_R = (void *) NAND_RD_ADDR; -+ this->IO_ADDR_W = (void *) NAND_WR_ADDR; -+ this->hwcontrol = crisv32_hwcontrol; -+ this->dev_ready = crisv32_device_ready; -+ /* 20 us command delay time */ -+ this->chip_delay = 20; -+ this->eccmode = NAND_ECC_SOFT; -+ -+#if 0 /* don't use BBT in boot loader */ -+ /* Enable the following for a flash based bad block table */ -+ this->options = NAND_USE_FLASH_BBT; -+#endif -+ /* don't scan for BBT */ -+ this->options = NAND_SKIP_BBTSCAN; -+ -+ /* Scan to find existance of the device */ -+ if (nand_scan (crisv32_mtd, 1)) { -+ err = -ENXIO; -+ puts ("nand_scan failed\r\n"); -+ free (crisv32_mtd); -+ return NULL; -+ } -+ -+ return crisv32_mtd; -+} -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/head.S linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/head.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/head.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/head.S 2007-01-31 16:52:19.000000000 +0100 -@@ -1,14 +1,85 @@ --/* $Id: head.S,v 1.4 2004/11/01 16:10:28 starvik Exp $ -- * -- * This used to be the rescue code but now that is handled by the -- * RedBoot based RFL instead. Nothing to see here, move along. -+/* $Id: head.S,v 1.16 2007/01/31 15:52:19 pkj Exp $ -+ * -+ * Simple boot loader which can also handle NAND chips. - */ - --#include --#include -+#include -+#include -+ -+#define RAM_INIT_MAGIC 0x56902387 -+#define NAND_BOOT_MAGIC 0x9A9DB001 -+ -+;; Debugging. Normally all these are set to 0. -+#define LEDS (0) -+#define LEDTEST (0) -+#define FLASH_LEDS_INSTEAD_OF_BOOT (0) -+#define SERIAL_DUMP (0) -+#define SERIAL_PORT (0) -+#define SERIAL_RECEIVE (0) -+ -+#if LEDS -+#include -+#include -+#include -+#endif -+ -+#if SERIAL_DUMP -+#include -+#include -+#endif -+ -+ -+#if (SERIAL_PORT == 0) -+#define regi_serial regi_ser0 -+#endif -+#if (SERIAL_PORT == 1) -+#define regi_serial regi_ser1 -+#endif -+ -+;; Macros -+ -+#if LEDS -+.macro SAY x -+ orq 31, $r9 -+ and.d ~(\x), $r9 -+ move.d $r9, [$r8] -+.endm -+#else -+.macro SAY x -+ ;; nothing -+.endm -+#endif -+ -+#if SERIAL_DUMP -+.macro DISPLAY x -+ move.d \x, $r6 ; save value -+ moveq 28, $r5 ; counter / shift amount -+8: -+ move.d $r6, $r3 ; fetch value -+ bsr nybbleout -+ lsr.d $r5, $r3 ; shift nybble we want (delay slot) -+ subq 4, $r5 ; count down bits -+ bpl 8b ; loop -+ nop -+ bsr serout -+ moveq 13, $r3 ; delay slot -+ bsr serout -+ moveq 10, $r3 ; delay slot -+.endm -+#else -+.macro DISPLAY x -+ ;; nothing -+.endm -+#endif -+ -+ -+;; Code - - .text -+start: - -+ ;; TODO: Add code for Ronny's search-for-good-block boot rom algorithm -+ - ;; Start clocks for used blocks. - move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 - move.d [$r1], $r0 -@@ -17,22 +88,258 @@ - REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 - move.d $r0, [$r1] - -- ;; Copy 68KB NAND flash to Internal RAM (if NAND boot) -- move.d 0x38004000, $r10 -- move.d 0x8000, $r11 -- move.d 0x11000, $r12 -- move.d copy_complete, $r13 -- and.d 0x000fffff, $r13 -- or.d 0x38000000, $r13 -+ -+#if LEDS -+ ;; set up for led control on PB 0..4 -+ move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r8 ; output reg -+ move.d [$r8], $r9 ; shadow -+ -+ ;; set up pinmux -+ move.d REG_ADDR(pinmux, regi_pinmux, rw_pb_gio), $r2 -+ move.d [$r2], $r3 -+ orq 31, $r3 -+ move.d $r3, [$r2] -+ -+ ;; set up GPIO -+ ;; set to outputs -+ move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r2 -+ move.d [$r2], $r3 -+ orq 31, $r3 -+ move.d $r3, [$r2] -+ -+ -+#if LEDTEST -+ ;; led test -+ -+ moveq 0, $r1 ; led 5-bit binary counter -+1: -+ or.d 31, $r9 -+ xor $r1, $r9 -+ move.d $r9, [$r8] -+ addq 1, $r1 -+ -+ move.d 100000000, $r2 ; delay loop (100e6 => 1s @200Mc) -+2: -+ bne 2b -+ subq 1, $r2 -+ -+ ba 1b ; loop -+ nop -+#endif -+ -+#endif -+ -+ -+check_nand_boot: -+ ;; Check boot source by checking highest nybble of PC: -+ ;; If we're running at address 0x0XXXXXXX, we're in flash/eprom/sram -+ ;; If we're running at address 0x38000000, we're in internal RAM, -+ ;; so we're most likely coming from NAND. -+ ;; If we're running at address 0x40000000, we're in SDRAM, -+ ;; so we've most likely been started by some sort of bootstrapper -+ ;; e.g. fsboot, which in turn implies NAND, else we would be booting -+ ;; normally at 0x0XXXXXXX -+ -+ SAY 1 -+ -+here: -+ lapcq ., $r0 ; get PC -+ sub.d (here-start), $r0 ; offset from here -+ beq normal_boot ; running at address 0 - normal boot -+ move.d $r0, $r13 ; save offset for later (unused delay slot) -+ lsrq 28, $r0 ; get highest nybble -+ -+ SAY 2 -+ -+ ;; Prepare to copy 128KB of the NAND flash to internal RAM -+ move.d 0x38000200, $r10 ; dest in internal RAM -+ move.d 0x1fe00, $r12 ; #bytes -+ cmpq 4, $r0 ; running in RAM => started by fsboot -+ bhs copy_from_ram -+ movu.w 0x0200, $r11 ; source in flash (byte address) (DELAY SLOT) - - #include "../../lib/nand_init.S" - -- ;; No NAND found -+#if LEDS -+ ;; must set up registers again (clobbered by nand_init) -+ move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r8 ; output reg -+ move.d [$r8], $r9 ; shadow -+#endif -+ -+ SAY 3 -+ -+ ba copy_complete -+ nop -+ -+ ; Since the code above has to reside within the first 256 bytes of -+ ; NAND flash, verify that the code so far hasn't gone past this -+ ; limit. If you're considering removing this, you haven't -+ ; properly understood the problem; see nand_init.S for details. -+ .org PAGE_SIZE_ADDRESSES ; from nand_init.S -+ .org PAGE_SIZE_BYTES ; from nand_init.S -+ -+normal_boot: -+ SAY 4 -+ -+ ;; Normal NOR boot - move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10 -- jump $r10 ; Jump to decompresser -+ jump $r10 ; Jump to decompresser -+ nop -+ -+copy_from_ram: -+ add.d $r13, $r11 ; mem offs + src offs -> src addr -+1: -+ move.d [$r11+], $r0 ; read source -+ subq 4, $r12 ; 4 bytes at a time -+ bne 1b ; loop until done -+ move.d $r0, [$r10+] ; write dest (DELAY SLOT) -+ jump copy_complete ; jump to internal RAM -+ nop ; delay slot -+ -+copy_complete: -+ SAY 5 -+ -+#if FLASH_LEDS_INSTEAD_OF_BOOT -+ -+flash: -+ -+ ;; led test -+ -+ moveq 0, $r1 ; led binary counter -+1: -+ or.d 31, $r9 -+ xor $r1, $r9 -+ move.d $r9, [$r8] -+ addq 1, $r1 -+ -+ move.d 100000000, $r2 ; delay loop (100e6 => 1s) -+2: -+ bne 2b -+ subq 1, $r2 -+ -+ ba 1b ; loop forever - nop -+#endif - --copy_complete: -- move.d 0x38000000 + CONFIG_ETRAX_PTABLE_SECTOR, $r10 -- jump $r10 ; Jump to decompresser -+ -+#if SERIAL_DUMP -+ ;; dump memory to serial port -+ -+#if (SERIAL_PORT == 1) -+ ;; set up serial-1 pins -+ move.d REG_ADDR(pinmux, regi_pinmux, rw_hwprot), $r1 -+ move.d [$r1], $r0 -+ or.d REG_STATE(pinmux, rw_hwprot, ser1, yes), $r0 -+ move.d $r0, [$r1] -+#endif -+ -+ ;; rw_xoff: chr and automatic = 0 -+ move.d REG_ADDR(ser, regi_serial, rw_xoff), $r1 -+ move.d [$r1], $r0 -+ and.d ~(REG_MASK(ser, rw_xoff, automatic) | REG_MASK(ser, rw_xoff, chr)), $r0 -+ move.d $r0, [$r1] -+ -+ ;; tr control -+ move.d REG_ADDR(ser, regi_serial, rw_tr_ctrl), $r1 -+ move.d [$r1], $r0 -+ and.d ~(REG_MASK(ser, rw_tr_ctrl, base_freq) | REG_MASK(ser, rw_tr_ctrl, stop_bits)), $r0 -+ or.d REG_STATE(ser, rw_tr_ctrl, stop_bits, bits2) | REG_STATE(ser, rw_tr_ctrl, base_freq, f29_493) | REG_STATE(ser, rw_tr_ctrl, en, yes), $r0 -+ move.d $r0, [$r1] -+ -+ ;; tr baud -+ move.d REG_ADDR(ser, regi_serial, rw_tr_baud_div), $r1 -+ move.d [$r1], $r0 -+ move.w (29493000 / 8) / 115200, $r0 -+ move.d $r0, [$r1] -+ -+#if SERIAL_RECEIVE -+ ;; rec control -+ move.d REG_ADDR(ser, regi_serial, rw_rec_ctrl), $r1 -+ move.d [$r1], $r0 -+ and.d ~(REG_MASK(ser, rw_rec_ctrl, base_freq)), $r0 -+ or.d REG_STATE(ser, rw_rec_ctrl, base_freq, f29_493) | REG_STATE(ser, rw_tr_ctrl, en, yes), $r0 -+ move.d $r0, [$r1] -+ -+ ;; rec baud -+ move.d REG_ADDR(ser, regi_serial, rw_rec_baud_div), $r1 -+ move.d [$r1], $r0 -+ move.w (29493000 / 8) / 115200, $r0 -+ move.d $r0, [$r1] -+#endif -+ -+ ;; dump memory -+ -+ move.d 0x38000000, $r5 ; pointer -+ -+ bsr serout -+ moveq 13, $r3 -+ bsr serout -+ moveq 10, $r3 -+ bsr serout -+ moveq 10, $r3 -+ -+1: -+ movu.b [$r5+], $r3 ; get value -+ move.d $r3, $r6 ; save -+ -+ bsr nybbleout -+ lsrq 4, $r3 ; high nybble (delay slot) -+ -+ move.d $r6, $r3 ; restore -+ bsr nybbleout -+ andq 15, $r3 ; delay slot -+ -+ movu.b 32, $r3 -+ bsr serout - nop -+ -+ move.d $r5, $r3 -+ andq 15, $r3 -+ bne 1b -+ nop -+ -+ bsr serout -+ moveq 13, $r3 ; delay slot -+ bsr serout -+ moveq 10, $r3 ; delay slot -+ -+ ba 1b ; loop forever -+ nop -+ -+nybbleout: -+ cmpq 10, $r3 -+ blo 1f -+ addq 48, $r3 ; delay slot -+ addq 7, $r3 -+1: -+serout: -+ move.d REG_ADDR(ser, regi_serial, rs_stat_din), $r1 -+ move.d REG_ADDR(ser, regi_serial, rw_dout), $r2 -+2: -+ move.d [$r1], $r4 -+ btstq REG_BIT(ser, rs_stat_din, tr_rdy), $r4 -+ bpl 2b -+ nop -+ ret -+ move.d $r3, [$r2] ; delay slot -+ -+#endif -+ -+;; Init DRAM -+ -+#include "../../lib/dram_init.S" -+ move.d RAM_INIT_MAGIC, $r8 ; tell kernel boot loader dram init'd -+ move.d NAND_BOOT_MAGIC, $r12 ; booted from NAND flash -+ -+;; TODO: Clear .bss (not needed yet because size of .bss is zero) -+;; TODO: Change .ld script so that BSS is in DRAM? -+ -+;; Ok, time to do something. Continue with boot loader in C. -+;; Must set up minimal C environment first though. -+ -+ move.d 0x38020000, $sp ; stack pointer at top of internal RAM -+ -+ move.d bootload, $r10 -+ jump $r10 ; Jump to boot loader -+ nop -+ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.c 2006-11-03 11:35:52.000000000 +0100 -@@ -0,0 +1,243 @@ -+/* -+ * lib.c -+ * Small practical functions for boot loader -+ * malloc/free -+ * memcpy/memset -+ * writeb/writew/readb/readw -+ * putc/puts/putnybble/putx -+ * error/error2/BUG -+ * serial_init -+ * -+ * $Id: lib.c,v 1.4 2006/11/03 10:35:52 pkj Exp $ -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "lib.h" -+ -+/* the "heap" is put directly after BSS ends, at _end */ -+ -+extern int _end; -+static long free_mem_ptr = (long)&_end; -+ -+void *malloc(int size) -+{ -+ void *p; -+ -+ if (size <0) error("Malloc error"); -+ -+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ -+ -+ p = (void *)free_mem_ptr; -+ free_mem_ptr += size; -+ -+ return p; -+} -+ -+void free(void *where) -+{ /* Don't care */ -+} -+ -+/* I/O */ -+ -+unsigned char readb(const volatile void *addr) -+{ -+ return *(volatile unsigned char *) addr; -+} -+ -+unsigned short readw(const volatile void *addr) -+{ -+ return *(volatile unsigned short *) addr; -+} -+ -+void writeb(unsigned char b, volatile void *addr) -+{ -+ *(volatile unsigned char *) addr = b; -+} -+ -+void writew(unsigned short b, volatile void *addr) -+{ -+ *(volatile unsigned short *) addr = b; -+} -+ -+/* info and error messages to serial console */ -+ -+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL -+static inline void -+serout(const char c, reg_scope_instances regi_ser) -+{ -+ reg_ser_rs_stat_din rs; -+ reg_ser_rw_dout dout = {.data = c}; -+ -+ do { -+ rs = REG_RD(ser, regi_ser, rs_stat_din); -+ } -+ while (!rs.tr_rdy);/* Wait for tranceiver. */ -+ -+ REG_WR(ser, regi_ser, rw_dout, dout); -+} -+ -+ -+void -+putc(const char c) -+{ -+#ifdef CONFIG_ETRAX_DEBUG_PORT0 -+ serout(c, regi_ser0); -+#endif -+#ifdef CONFIG_ETRAX_DEBUG_PORT1 -+ serout(c, regi_ser1); -+#endif -+#ifdef CONFIG_ETRAX_DEBUG_PORT2 -+ serout(c, regi_ser2); -+#endif -+#ifdef CONFIG_ETRAX_DEBUG_PORT3 -+ serout(c, regi_ser3); -+#endif -+} -+ -+ -+void -+puts(const char *s) -+{ -+ while (*s) -+ putc(*s++); -+} -+ -+void -+putnybble(int n) -+{ -+ putc("0123456789abcdef"[n & 15]); -+} -+ -+void -+putx(int x) -+{ -+ int i; -+ -+ puts("0x"); -+ for (i = 7; i >= 0; i--) -+ putnybble(x >> 4*i); -+} -+ -+void -+putnl() -+{ -+ puts("\r\n"); -+} -+ -+#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */ -+ -+void* -+memset(void* s, int c, size_t n) -+{ -+ int i; -+ char *ss = (char*)s; -+ -+ for (i=0;i -+ -+/* nice stuff we need without having any library around */ -+ -+void* memset(void* s, int c, size_t n); -+void* memcpy(void* __dest, __const void* __src, -+ size_t __n); -+ -+#define memzero(s, n) memset ((s), 0, (n)) -+ -+#undef BUG -+#define BUG() error2("BUG in " __FILE__, __LINE__, __FUNCTION__) -+ -+void *malloc(int size); -+void free(void *where); -+void error(const char *m); -+void error2(const char *m, int l, const char *f); -+void serial_init(void); -+ -+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL -+void putc(const char); -+void puts(const char *); -+void putnybble(int n); -+void putx(int x); -+void putnl(); -+#else -+#define putc(ch) -+#define puts(str) -+#define putnybble(nyb) -+#define putx(x) -+#define putnl() -+#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */ -+ -+unsigned char readb(const volatile void *addr); -+unsigned short readw(const volatile void *addr); -+void writeb(unsigned char b, volatile void *addr); -+void writew(unsigned short b, volatile void *addr); -+ -+#endif /* _LIB_H */ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd-abi.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd-abi.h ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd-abi.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd-abi.h 2006-09-06 11:21:07.000000000 +0200 -@@ -0,0 +1,121 @@ -+/* -+ * $Id: mtd-abi.h,v 1.1 2006/09/06 09:21:07 ricardw Exp $ -+ * -+ * Portions of MTD ABI definition which are shared by kernel and user space -+ */ -+ -+#ifndef __MTD_ABI_H__ -+#define __MTD_ABI_H__ -+ -+#ifndef __KERNEL__ /* Urgh. The whole point of splitting this out into -+ separate files was to avoid #ifdef __KERNEL__ */ -+#define __user -+#endif -+ -+struct erase_info_user { -+ uint32_t start; -+ uint32_t length; -+}; -+ -+struct mtd_oob_buf { -+ uint32_t start; -+ uint32_t length; -+ unsigned char __user *ptr; -+}; -+ -+#define MTD_ABSENT 0 -+#define MTD_RAM 1 -+#define MTD_ROM 2 -+#define MTD_NORFLASH 3 -+#define MTD_NANDFLASH 4 -+#define MTD_PEROM 5 -+#define MTD_DATAFLASH 6 -+#define MTD_OTHER 14 -+#define MTD_UNKNOWN 15 -+ -+#define MTD_CLEAR_BITS 1 // Bits can be cleared (flash) -+#define MTD_SET_BITS 2 // Bits can be set -+#define MTD_ERASEABLE 4 // Has an erase function -+#define MTD_WRITEB_WRITEABLE 8 // Direct IO is possible -+#define MTD_VOLATILE 16 // Set for RAMs -+#define MTD_XIP 32 // eXecute-In-Place possible -+#define MTD_OOB 64 // Out-of-band data (NAND flash) -+#define MTD_ECC 128 // Device capable of automatic ECC -+#define MTD_NO_VIRTBLOCKS 256 // Virtual blocks not allowed -+#define MTD_PROGRAM_REGIONS 512 // Configurable Programming Regions -+ -+// Some common devices / combinations of capabilities -+#define MTD_CAP_ROM 0 -+#define MTD_CAP_RAM (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE) -+#define MTD_CAP_NORFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE) -+#define MTD_CAP_NANDFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB) -+#define MTD_WRITEABLE (MTD_CLEAR_BITS|MTD_SET_BITS) -+ -+ -+// Types of automatic ECC/Checksum available -+#define MTD_ECC_NONE 0 // No automatic ECC available -+#define MTD_ECC_RS_DiskOnChip 1 // Automatic ECC on DiskOnChip -+#define MTD_ECC_SW 2 // SW ECC for Toshiba & Samsung devices -+ -+/* ECC byte placement */ -+#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended) -+#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode) -+#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme -+#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read) -+#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default -+ -+/* OTP mode selection */ -+#define MTD_OTP_OFF 0 -+#define MTD_OTP_FACTORY 1 -+#define MTD_OTP_USER 2 -+ -+struct mtd_info_user { -+ uint8_t type; -+ uint32_t flags; -+ uint32_t size; // Total size of the MTD -+ uint32_t erasesize; -+ uint32_t oobblock; // Size of OOB blocks (e.g. 512) -+ uint32_t oobsize; // Amount of OOB data per block (e.g. 16) -+ uint32_t ecctype; -+ uint32_t eccsize; -+}; -+ -+struct region_info_user { -+ uint32_t offset; /* At which this region starts, -+ * from the beginning of the MTD */ -+ uint32_t erasesize; /* For this region */ -+ uint32_t numblocks; /* Number of blocks in this region */ -+ uint32_t regionindex; -+}; -+ -+struct otp_info { -+ uint32_t start; -+ uint32_t length; -+ uint32_t locked; -+}; -+ -+#define MEMGETINFO _IOR('M', 1, struct mtd_info_user) -+#define MEMERASE _IOW('M', 2, struct erase_info_user) -+#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) -+#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) -+#define MEMLOCK _IOW('M', 5, struct erase_info_user) -+#define MEMUNLOCK _IOW('M', 6, struct erase_info_user) -+#define MEMGETREGIONCOUNT _IOR('M', 7, int) -+#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) -+#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) -+#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) -+#define MEMGETBADBLOCK _IOW('M', 11, loff_t) -+#define MEMSETBADBLOCK _IOW('M', 12, loff_t) -+#define OTPSELECT _IOR('M', 13, int) -+#define OTPGETREGIONCOUNT _IOW('M', 14, int) -+#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) -+#define OTPLOCK _IOR('M', 16, struct otp_info) -+ -+struct nand_oobinfo { -+ uint32_t useecc; -+ uint32_t eccbytes; -+ uint32_t oobfree[8][2]; -+ uint32_t eccpos[32]; -+}; -+ -+#endif /* __MTD_ABI_H__ */ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd.h ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd.h 2006-12-14 07:59:24.000000000 +0100 -@@ -0,0 +1,270 @@ -+/* -+ * $Id: mtd.h,v 1.5 2006/12/14 06:59:24 ricardw Exp $ -+ * -+ * Copyright (C) 1999-2003 David Woodhouse et al. -+ * -+ * Released under GPL -+ */ -+ -+#ifndef __MTD_MTD_H__ -+#define __MTD_MTD_H__ -+ -+#ifndef __KERNEL__ -+#error This is a kernel header. Perhaps include mtd-user.h instead? -+#endif -+ -+/* only include absolutely necessary linux headers which will not change -+ * significantly -+ */ -+#include -+#include -+ -+#if 0 -+#include -+#include -+#include -+ -+#include -+#include -+#endif -+ -+#include "mtd-abi.h" -+ -+/* local config, we don't want linux/config.h here */ -+/* any undef/define pairs here avoid warnings due to linux autoconf includes */ -+#undef CONFIG_MTD_PARTITIONS -+#undef CONFIG_MTD_DEBUG -+#undef CONFIG_MTD_NAND_VERIFY_WRITE -+#define CONFIG_MTD_NAND_VERIFY_WRITE -+ -+/* our MTD config */ -+ -+#define NAND_BBT_SUPPORT 0 -+#define NAND_WRITE_SUPPORT 0 -+#define NAND_ERASE_SUPPORT 0 -+#define NAND_MULTICHIP_SUPPORT 0 -+#define NAND_HWECC_SUPPORT 0 -+#define NAND_KVEC_SUPPORT 0 -+ -+ -+#define MTD_CHAR_MAJOR 90 -+#define MTD_BLOCK_MAJOR 31 -+#define MAX_MTD_DEVICES 16 -+ -+#define MTD_ERASE_PENDING 0x01 -+#define MTD_ERASING 0x02 -+#define MTD_ERASE_SUSPEND 0x04 -+#define MTD_ERASE_DONE 0x08 -+#define MTD_ERASE_FAILED 0x10 -+ -+/* If the erase fails, fail_addr might indicate exactly which block failed. If -+ fail_addr = 0xffffffff, the failure was not at the device level or was not -+ specific to any particular block. */ -+struct erase_info { -+ struct mtd_info *mtd; -+ u_int32_t addr; -+ u_int32_t len; -+ u_int32_t fail_addr; -+ u_long time; -+ u_long retries; -+ u_int dev; -+ u_int cell; -+ void (*callback) (struct erase_info *self); -+ u_long priv; -+ u_char state; -+ struct erase_info *next; -+}; -+ -+struct mtd_erase_region_info { -+ u_int32_t offset; /* At which this region starts, from the beginning of the MTD */ -+ u_int32_t erasesize; /* For this region */ -+ u_int32_t numblocks; /* Number of blocks of erasesize in this region */ -+}; -+ -+struct mtd_info { -+ u_char type; -+ u_int32_t flags; -+ u_int32_t size; // Total size of the MTD -+ -+ /* "Major" erase size for the device. Naïve users may take this -+ * to be the only erase size available, or may use the more detailed -+ * information below if they desire -+ */ -+ u_int32_t erasesize; -+ -+ u_int32_t oobblock; // Size of OOB blocks (e.g. 512) -+ u_int32_t oobsize; // Amount of OOB data per block (e.g. 16) -+ u_int32_t ecctype; -+ u_int32_t eccsize; -+ -+ /* -+ * Reuse some of the above unused fields in the case of NOR flash -+ * with configurable programming regions to avoid modifying the -+ * user visible structure layout/size. Only valid when the -+ * MTD_PROGRAM_REGIONS flag is set. -+ * (Maybe we should have an union for those?) -+ */ -+#define MTD_PROGREGION_SIZE(mtd) (mtd)->oobblock -+#define MTD_PROGREGION_CTRLMODE_VALID(mtd) (mtd)->oobsize -+#define MTD_PROGREGION_CTRLMODE_INVALID(mtd) (mtd)->ecctype -+ -+ // Kernel-only stuff starts here. -+ char *name; -+ int index; -+ -+ // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) -+ struct nand_oobinfo oobinfo; -+ u_int32_t oobavail; // Number of bytes in OOB area available for fs -+ -+ /* Data for variable erase regions. If numeraseregions is zero, -+ * it means that the whole device has erasesize as given above. -+ */ -+ int numeraseregions; -+ struct mtd_erase_region_info *eraseregions; -+ -+ /* This really shouldn't be here. It can go away in 2.5 */ -+ u_int32_t bank_size; -+ -+ int (*erase) (struct mtd_info *mtd, struct erase_info *instr); -+ -+ /* This stuff for eXecute-In-Place */ -+ int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); -+ -+ /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ -+ void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len); -+ -+ -+ int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); -+ int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); -+ -+ int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); -+ int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); -+ -+ int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); -+ int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); -+ -+ /* -+ * Methods to access the protection register area, present in some -+ * flash devices. The user data is one time programmable but the -+ * factory data is read only. -+ */ -+ int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); -+ int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); -+ int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); -+ int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); -+ int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); -+ int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len); -+ -+#if NAND_KVEC_SUPPORT -+ /* kvec-based read/write methods. We need these especially for NAND flash, -+ with its limited number of write cycles per erase. -+ NB: The 'count' parameter is the number of _vectors_, each of -+ which contains an (ofs, len) tuple. -+ */ -+ int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen); -+ int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, -+ size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); -+ int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); -+ int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, -+ size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); -+#endif -+ -+ /* Sync */ -+ void (*sync) (struct mtd_info *mtd); -+ -+ /* Chip-supported device locking */ -+ int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len); -+ int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len); -+ -+ /* Power Management functions */ -+ int (*suspend) (struct mtd_info *mtd); -+ void (*resume) (struct mtd_info *mtd); -+ -+ /* Bad block management functions */ -+ int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); -+ int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); -+ -+#if 0 /* don't know what this is for */ -+ struct notifier_block reboot_notifier; /* default mode before reboot */ -+#endif -+ -+ void *priv; -+ -+ struct module *owner; -+ int usecount; -+}; -+ -+#if 0 /* don't need these */ -+ /* Kernel-side ioctl definitions */ -+ -+extern int add_mtd_device(struct mtd_info *mtd); -+extern int del_mtd_device (struct mtd_info *mtd); -+ -+extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); -+ -+extern void put_mtd_device(struct mtd_info *mtd); -+ -+ -+struct mtd_notifier { -+ void (*add)(struct mtd_info *mtd); -+ void (*remove)(struct mtd_info *mtd); -+ struct list_head list; -+}; -+ -+ -+extern void register_mtd_user (struct mtd_notifier *new); -+extern int unregister_mtd_user (struct mtd_notifier *old); -+#endif -+ -+#if NAND_KVEC_SUPPORT -+int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, -+ unsigned long count, loff_t to, size_t *retlen); -+ -+int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, -+ unsigned long count, loff_t from, size_t *retlen); -+#endif -+ -+#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args) -+#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d)) -+#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg) -+#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args) -+#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args) -+#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args) -+#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args) -+#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args) -+#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args) -+#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args) -+#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args) -+#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0) -+ -+ -+#ifdef CONFIG_MTD_PARTITIONS -+void mtd_erase_callback(struct erase_info *instr); -+#else -+static inline void mtd_erase_callback(struct erase_info *instr) -+{ -+ if (instr->callback) -+ instr->callback(instr); -+} -+#endif -+ -+/* -+ * Debugging macro and defines -+ */ -+#define MTD_DEBUG_LEVEL0 (0) /* Quiet */ -+#define MTD_DEBUG_LEVEL1 (1) /* Audible */ -+#define MTD_DEBUG_LEVEL2 (2) /* Loud */ -+#define MTD_DEBUG_LEVEL3 (3) /* Noisy */ -+ -+#ifdef CONFIG_MTD_DEBUG -+#define DEBUG(n, args...) \ -+ do { \ -+ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ -+ printk(KERN_INFO args); \ -+ } while(0) -+#else /* CONFIG_MTD_DEBUG */ -+#define DEBUG(n, args...) do { } while(0) -+ -+#endif /* CONFIG_MTD_DEBUG */ -+ -+#endif /* __MTD_MTD_H__ */ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand.h ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand.h 2006-11-03 11:35:52.000000000 +0100 -@@ -0,0 +1,521 @@ -+/* -+ * linux/include/linux/mtd/nand.h -+ * -+ * Copyright (c) 2000 David Woodhouse -+ * Steven J. Hill -+ * Thomas Gleixner -+ * -+ * $Id: nand.h,v 1.4 2006/11/03 10:35:52 pkj Exp $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Info: -+ * Contains standard defines and IDs for NAND flash devices -+ * -+ * Changelog: -+ * 01-31-2000 DMW Created -+ * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers -+ * so it can be used by other NAND flash device -+ * drivers. I also changed the copyright since none -+ * of the original contents of this file are specific -+ * to DoC devices. David can whack me with a baseball -+ * bat later if I did something naughty. -+ * 10-11-2000 SJH Added private NAND flash structure for driver -+ * 10-24-2000 SJH Added prototype for 'nand_scan' function -+ * 10-29-2001 TG changed nand_chip structure to support -+ * hardwarespecific function for accessing control lines -+ * 02-21-2002 TG added support for different read/write adress and -+ * ready/busy line access function -+ * 02-26-2002 TG added chip_delay to nand_chip structure to optimize -+ * command delay times for different chips -+ * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate -+ * defines in jffs2/wbuf.c -+ * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if -+ * CONFIG_MTD_NAND_ECC_JFFS2 is not set -+ * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC -+ * -+ * 08-29-2002 tglx nand_chip structure: data_poi for selecting -+ * internal / fs-driver buffer -+ * support for 6byte/512byte hardware ECC -+ * read_ecc, write_ecc extended for different oob-layout -+ * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB, -+ * NAND_YAFFS_OOB -+ * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL -+ * Split manufacturer and device ID structures -+ * -+ * 02-08-2004 tglx added option field to nand structure for chip anomalities -+ * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id -+ * update of nand_chip structure description -+ * 01-17-2005 dmarlin added extended commands for AG-AND device and added option -+ * for BBT_AUTO_REFRESH. -+ * 01-20-2005 dmarlin added optional pointer to hardware specific callback for -+ * extra error status checks. -+ */ -+#ifndef __LINUX_MTD_NAND_H -+#define __LINUX_MTD_NAND_H -+ -+#if 0 /* avoid these as much as possible */ -+#include -+#include -+#include -+#endif -+ -+#include "mtd.h" /* local */ -+ -+#include /* we do need this though ... */ -+ -+struct mtd_info; -+/* Scan and identify a NAND device */ -+extern int nand_scan (struct mtd_info *mtd, int max_chips); -+/* Free resources held by the NAND device */ -+extern void nand_release (struct mtd_info *mtd); -+ -+/* Read raw data from the device without ECC */ -+extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen); -+ -+ -+/* The maximum number of NAND chips in an array */ -+#define NAND_MAX_CHIPS 8 -+ -+/* This constant declares the max. oobsize / page, which -+ * is supported now. If you add a chip with bigger oobsize/page -+ * adjust this accordingly. -+ */ -+#define NAND_MAX_OOBSIZE 64 -+ -+/* -+ * Constants for hardware specific CLE/ALE/NCE function -+*/ -+/* Select the chip by setting nCE to low */ -+#define NAND_CTL_SETNCE 1 -+/* Deselect the chip by setting nCE to high */ -+#define NAND_CTL_CLRNCE 2 -+/* Select the command latch by setting CLE to high */ -+#define NAND_CTL_SETCLE 3 -+/* Deselect the command latch by setting CLE to low */ -+#define NAND_CTL_CLRCLE 4 -+/* Select the address latch by setting ALE to high */ -+#define NAND_CTL_SETALE 5 -+/* Deselect the address latch by setting ALE to low */ -+#define NAND_CTL_CLRALE 6 -+/* Set write protection by setting WP to high. Not used! */ -+#define NAND_CTL_SETWP 7 -+/* Clear write protection by setting WP to low. Not used! */ -+#define NAND_CTL_CLRWP 8 -+ -+/* -+ * Standard NAND flash commands -+ */ -+#define NAND_CMD_READ0 0 -+#define NAND_CMD_READ1 1 -+#define NAND_CMD_PAGEPROG 0x10 -+#define NAND_CMD_READOOB 0x50 -+#define NAND_CMD_ERASE1 0x60 -+#define NAND_CMD_STATUS 0x70 -+#define NAND_CMD_STATUS_MULTI 0x71 -+#define NAND_CMD_SEQIN 0x80 -+#define NAND_CMD_READID 0x90 -+#define NAND_CMD_ERASE2 0xd0 -+#define NAND_CMD_RESET 0xff -+ -+/* Extended commands for large page devices */ -+#define NAND_CMD_READSTART 0x30 -+#define NAND_CMD_CACHEDPROG 0x15 -+ -+/* Extended commands for AG-AND device */ -+/* -+ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but -+ * there is no way to distinguish that from NAND_CMD_READ0 -+ * until the remaining sequence of commands has been completed -+ * so add a high order bit and mask it off in the command. -+ */ -+#define NAND_CMD_DEPLETE1 0x100 -+#define NAND_CMD_DEPLETE2 0x38 -+#define NAND_CMD_STATUS_MULTI 0x71 -+#define NAND_CMD_STATUS_ERROR 0x72 -+/* multi-bank error status (banks 0-3) */ -+#define NAND_CMD_STATUS_ERROR0 0x73 -+#define NAND_CMD_STATUS_ERROR1 0x74 -+#define NAND_CMD_STATUS_ERROR2 0x75 -+#define NAND_CMD_STATUS_ERROR3 0x76 -+#define NAND_CMD_STATUS_RESET 0x7f -+#define NAND_CMD_STATUS_CLEAR 0xff -+ -+/* Status bits */ -+#define NAND_STATUS_FAIL 0x01 -+#define NAND_STATUS_FAIL_N1 0x02 -+#define NAND_STATUS_TRUE_READY 0x20 -+#define NAND_STATUS_READY 0x40 -+#define NAND_STATUS_WP 0x80 -+ -+/* -+ * Constants for ECC_MODES -+ */ -+ -+/* No ECC. Usage is not recommended ! */ -+#define NAND_ECC_NONE 0 -+/* Software ECC 3 byte ECC per 256 Byte data */ -+#define NAND_ECC_SOFT 1 -+/* Hardware ECC 3 byte ECC per 256 Byte data */ -+#define NAND_ECC_HW3_256 2 -+/* Hardware ECC 3 byte ECC per 512 Byte data */ -+#define NAND_ECC_HW3_512 3 -+/* Hardware ECC 3 byte ECC per 512 Byte data */ -+#define NAND_ECC_HW6_512 4 -+/* Hardware ECC 8 byte ECC per 512 Byte data */ -+#define NAND_ECC_HW8_512 6 -+/* Hardware ECC 12 byte ECC per 2048 Byte data */ -+#define NAND_ECC_HW12_2048 7 -+ -+/* -+ * Constants for Hardware ECC -+ */ -+/* Reset Hardware ECC for read */ -+#define NAND_ECC_READ 0 -+/* Reset Hardware ECC for write */ -+#define NAND_ECC_WRITE 1 -+/* Enable Hardware ECC before syndrom is read back from flash */ -+#define NAND_ECC_READSYN 2 -+ -+/* Bit mask for flags passed to do_nand_read_ecc */ -+#define NAND_GET_DEVICE 0x80 -+ -+ -+/* Option constants for bizarre disfunctionality and real -+* features -+*/ -+/* Chip can not auto increment pages */ -+#define NAND_NO_AUTOINCR 0x00000001 -+/* Buswitdh is 16 bit */ -+#define NAND_BUSWIDTH_16 0x00000002 -+/* Device supports partial programming without padding */ -+#define NAND_NO_PADDING 0x00000004 -+/* Chip has cache program function */ -+#define NAND_CACHEPRG 0x00000008 -+/* Chip has copy back function */ -+#define NAND_COPYBACK 0x00000010 -+/* AND Chip which has 4 banks and a confusing page / block -+ * assignment. See Renesas datasheet for further information */ -+#define NAND_IS_AND 0x00000020 -+/* Chip has a array of 4 pages which can be read without -+ * additional ready /busy waits */ -+#define NAND_4PAGE_ARRAY 0x00000040 -+/* Chip requires that BBT is periodically rewritten to prevent -+ * bits from adjacent blocks from 'leaking' in altering data. -+ * This happens with the Renesas AG-AND chips, possibly others. */ -+#define BBT_AUTO_REFRESH 0x00000080 -+ -+/* Options valid for Samsung large page devices */ -+#define NAND_SAMSUNG_LP_OPTIONS \ -+ (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) -+ -+/* Macros to identify the above */ -+#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR)) -+#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) -+#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) -+#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) -+ -+/* Mask to zero out the chip options, which come from the id table */ -+#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) -+ -+/* Non chip related options */ -+/* Use a flash based bad block table. This option is passed to the -+ * default bad block table function. */ -+#define NAND_USE_FLASH_BBT 0x00010000 -+/* The hw ecc generator provides a syndrome instead a ecc value on read -+ * This can only work if we have the ecc bytes directly behind the -+ * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ -+#define NAND_HWECC_SYNDROME 0x00020000 -+/* This option skips the bbt scan during initialization. */ -+#define NAND_SKIP_BBTSCAN 0x00040000 -+ -+/* Options set by nand scan */ -+/* Nand scan has allocated oob_buf */ -+#define NAND_OOBBUF_ALLOC 0x40000000 -+/* Nand scan has allocated data_buf */ -+#define NAND_DATABUF_ALLOC 0x80000000 -+ -+ -+/* -+ * nand_state_t - chip states -+ * Enumeration for NAND flash chip state -+ */ -+typedef enum { -+ FL_READY, -+ FL_READING, -+ FL_WRITING, -+ FL_ERASING, -+ FL_SYNCING, -+ FL_CACHEDPRG, -+ FL_PM_SUSPENDED, -+} nand_state_t; -+ -+/* Keep gcc happy */ -+struct nand_chip; -+ -+/** -+ * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices -+ * @lock: protection lock -+ * @active: the mtd device which holds the controller currently -+ * @wq: wait queue to sleep on if a NAND operation is in progress -+ * used instead of the per chip wait queue when a hw controller is available -+ */ -+#if NAND_HWECC_SUPPORT -+struct nand_hw_control { -+ spinlock_t lock; -+ struct nand_chip *active; -+ wait_queue_head_t wq; -+}; -+#endif -+ -+/** -+ * struct nand_chip - NAND Private Flash Chip Data -+ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device -+ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device -+ * @read_byte: [REPLACEABLE] read one byte from the chip -+ * @write_byte: [REPLACEABLE] write one byte to the chip -+ * @read_word: [REPLACEABLE] read one word from the chip -+ * @write_word: [REPLACEABLE] write one word to the chip -+ * @write_buf: [REPLACEABLE] write data from the buffer to the chip -+ * @read_buf: [REPLACEABLE] read data from the chip into the buffer -+ * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data -+ * @select_chip: [REPLACEABLE] select chip nr -+ * @block_bad: [REPLACEABLE] check, if the block is bad -+ * @block_markbad: [REPLACEABLE] mark the block bad -+ * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines -+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line -+ * If set to NULL no access to ready/busy is available and the ready/busy information -+ * is read from the chip status register -+ * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip -+ * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready -+ * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware -+ * @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw) -+ * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only -+ * be provided if a hardware ECC is available -+ * @erase_cmd: [INTERN] erase command write function, selectable due to AND support -+ * @scan_bbt: [REPLACEABLE] function to scan bad block table -+ * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines -+ * @eccsize: [INTERN] databytes used per ecc-calculation -+ * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step -+ * @eccsteps: [INTERN] number of ecc calculation steps per page -+ * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) -+ * @chip_lock: [INTERN] spinlock used to protect access to this structure and the chip -+ * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress -+ * @state: [INTERN] the current state of the NAND device -+ * @page_shift: [INTERN] number of address bits in a page (column address bits) -+ * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock -+ * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry -+ * @chip_shift: [INTERN] number of address bits in one chip -+ * @data_buf: [INTERN] internal buffer for one page + oob -+ * @oob_buf: [INTERN] oob buffer for one eraseblock -+ * @oobdirty: [INTERN] indicates that oob_buf must be reinitialized -+ * @data_poi: [INTERN] pointer to a data buffer -+ * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about -+ * special functionality. See the defines for further explanation -+ * @badblockpos: [INTERN] position of the bad block marker in the oob area -+ * @numchips: [INTERN] number of physical chips -+ * @chipsize: [INTERN] the size of one chip for multichip arrays -+ * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 -+ * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf -+ * @autooob: [REPLACEABLE] the default (auto)placement scheme -+ * @bbt: [INTERN] bad block table pointer -+ * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup -+ * @bbt_md: [REPLACEABLE] bad block table mirror descriptor -+ * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan -+ * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices -+ * @priv: [OPTIONAL] pointer to private chip date -+ * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks -+ * (determine if errors are correctable) -+ */ -+ -+struct nand_chip { -+ void __iomem *IO_ADDR_R; -+ void __iomem *IO_ADDR_W; -+ -+ u_char (*read_byte)(struct mtd_info *mtd); -+ void (*write_byte)(struct mtd_info *mtd, u_char byte); -+ u16 (*read_word)(struct mtd_info *mtd); -+ void (*write_word)(struct mtd_info *mtd, u16 word); -+ -+ void (*write_buf)(struct mtd_info *mtd, const u_char *buf, int len); -+ void (*read_buf)(struct mtd_info *mtd, u_char *buf, int len); -+ int (*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len); -+ void (*select_chip)(struct mtd_info *mtd, int chip); -+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); -+ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); -+ void (*hwcontrol)(struct mtd_info *mtd, int cmd); -+ int (*dev_ready)(struct mtd_info *mtd); -+ void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); -+ int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); -+ int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); -+ int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); -+ void (*enable_hwecc)(struct mtd_info *mtd, int mode); -+ void (*erase_cmd)(struct mtd_info *mtd, int page); -+ int (*scan_bbt)(struct mtd_info *mtd); -+ int eccmode; -+ int eccsize; -+ int eccbytes; -+ int eccsteps; -+ int chip_delay; -+#if 0 /* no spinlocks or wait queues in boot loader */ -+ spinlock_t chip_lock; -+ wait_queue_head_t wq; -+#endif -+ nand_state_t state; -+ int page_shift; -+ int phys_erase_shift; -+ int bbt_erase_shift; -+ int chip_shift; -+ u_char *data_buf; -+ u_char *oob_buf; -+ int oobdirty; -+ u_char *data_poi; -+ unsigned int options; -+ int badblockpos; -+ int numchips; -+ unsigned long chipsize; -+ int pagemask; -+ int pagebuf; -+ struct nand_oobinfo *autooob; -+ uint8_t *bbt; -+ struct nand_bbt_descr *bbt_td; -+ struct nand_bbt_descr *bbt_md; -+ struct nand_bbt_descr *badblock_pattern; -+ struct nand_hw_control *controller; -+ void *priv; -+ int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); -+}; -+ -+/* -+ * NAND Flash Manufacturer ID Codes -+ */ -+#define NAND_MFR_TOSHIBA 0x98 -+#define NAND_MFR_SAMSUNG 0xec -+#define NAND_MFR_FUJITSU 0x04 -+#define NAND_MFR_NATIONAL 0x8f -+#define NAND_MFR_RENESAS 0x07 -+#define NAND_MFR_STMICRO 0x20 -+#define NAND_MFR_HYNIX 0xad -+ -+/** -+ * struct nand_flash_dev - NAND Flash Device ID Structure -+ * -+ * @name: Identify the device type -+ * @id: device ID code -+ * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 -+ * If the pagesize is 0, then the real pagesize -+ * and the eraseize are determined from the -+ * extended id bytes in the chip -+ * @erasesize: Size of an erase block in the flash device. -+ * @chipsize: Total chipsize in Mega Bytes -+ * @options: Bitfield to store chip relevant options -+ */ -+struct nand_flash_dev { -+ char *name; -+ int id; -+ unsigned long pagesize; -+ unsigned long chipsize; -+ unsigned long erasesize; -+ unsigned long options; -+}; -+ -+/** -+ * struct nand_manufacturers - NAND Flash Manufacturer ID Structure -+ * @name: Manufacturer name -+ * @id: manufacturer ID code of device. -+*/ -+struct nand_manufacturers { -+ int id; -+ char * name; -+}; -+ -+extern struct nand_flash_dev nand_flash_ids[]; -+extern struct nand_manufacturers nand_manuf_ids[]; -+ -+/** -+ * struct nand_bbt_descr - bad block table descriptor -+ * @options: options for this descriptor -+ * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE -+ * when bbt is searched, then we store the found bbts pages here. -+ * Its an array and supports up to 8 chips now -+ * @offs: offset of the pattern in the oob area of the page -+ * @veroffs: offset of the bbt version counter in the oob are of the page -+ * @version: version read from the bbt page during scan -+ * @len: length of the pattern, if 0 no pattern check is performed -+ * @maxblocks: maximum number of blocks to search for a bbt. This number of -+ * blocks is reserved at the end of the device where the tables are -+ * written. -+ * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than -+ * bad) block in the stored bbt -+ * @pattern: pattern to identify bad block table or factory marked good / -+ * bad blocks, can be NULL, if len = 0 -+ * -+ * Descriptor for the bad block table marker and the descriptor for the -+ * pattern which identifies good and bad blocks. The assumption is made -+ * that the pattern and the version count are always located in the oob area -+ * of the first block. -+ */ -+struct nand_bbt_descr { -+ int options; -+ int pages[NAND_MAX_CHIPS]; -+ int offs; -+ int veroffs; -+ uint8_t version[NAND_MAX_CHIPS]; -+ int len; -+ int maxblocks; -+ int reserved_block_code; -+ uint8_t *pattern; -+}; -+ -+/* Options for the bad block table descriptors */ -+ -+/* The number of bits used per block in the bbt on the device */ -+#define NAND_BBT_NRBITS_MSK 0x0000000F -+#define NAND_BBT_1BIT 0x00000001 -+#define NAND_BBT_2BIT 0x00000002 -+#define NAND_BBT_4BIT 0x00000004 -+#define NAND_BBT_8BIT 0x00000008 -+/* The bad block table is in the last good block of the device */ -+#define NAND_BBT_LASTBLOCK 0x00000010 -+/* The bbt is at the given page, else we must scan for the bbt */ -+#define NAND_BBT_ABSPAGE 0x00000020 -+/* The bbt is at the given page, else we must scan for the bbt */ -+#define NAND_BBT_SEARCH 0x00000040 -+/* bbt is stored per chip on multichip devices */ -+#define NAND_BBT_PERCHIP 0x00000080 -+/* bbt has a version counter at offset veroffs */ -+#define NAND_BBT_VERSION 0x00000100 -+/* Create a bbt if none axists */ -+#define NAND_BBT_CREATE 0x00000200 -+/* Search good / bad pattern through all pages of a block */ -+#define NAND_BBT_SCANALLPAGES 0x00000400 -+/* Scan block empty during good / bad block scan */ -+#define NAND_BBT_SCANEMPTY 0x00000800 -+/* Write bbt if neccecary */ -+#define NAND_BBT_WRITE 0x00001000 -+/* Read and write back block contents when writing bbt */ -+#define NAND_BBT_SAVECONTENT 0x00002000 -+/* Search good / bad pattern on the first and the second page */ -+#define NAND_BBT_SCAN2NDPAGE 0x00004000 -+ -+/* The maximum number of blocks to scan for a bbt */ -+#define NAND_BBT_SCAN_MAXBLOCKS 4 -+ -+extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd); -+extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs); -+extern int nand_default_bbt (struct mtd_info *mtd); -+extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt); -+extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); -+extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, -+ size_t * retlen, u_char * buf, u_char * oob_buf, -+ struct nand_oobinfo *oobsel, int flags); -+ -+/* -+* Constants for oob configuration -+*/ -+#define NAND_SMALL_BADBLOCK_POS 5 -+#define NAND_LARGE_BADBLOCK_POS 0 -+ -+#endif /* __LINUX_MTD_NAND_H */ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_base.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_base.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_base.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_base.c 2006-11-10 09:55:58.000000000 +0100 -@@ -0,0 +1,2910 @@ -+/* -+ * Snitched from drivers/mtd/nand_base.c -+ * Modified to run outside Linux. -+ * #if 0'd to remove non-essential functionality -+ * -+ * Overview: -+ * This is the generic MTD driver for NAND flash devices. It should be -+ * capable of working with almost all NAND chips currently available. -+ * Basic support for AG-AND chips is provided. -+ * -+ * Additional technical information is available on -+ * http://www.linux-mtd.infradead.org/tech/nand.html -+ * -+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) -+ * 2002 Thomas Gleixner (tglx@linutronix.de) -+ * -+ * 02-08-2004 tglx: support for strange chips, which cannot auto increment -+ * pages on read / read_oob -+ * -+ * 03-17-2004 tglx: Check ready before auto increment check. Simon Bayes -+ * pointed this out, as he marked an auto increment capable chip -+ * as NOAUTOINCR in the board driver. -+ * Make reads over block boundaries work too -+ * -+ * 04-14-2004 tglx: first working version for 2k page size chips -+ * -+ * 05-19-2004 tglx: Basic support for Renesas AG-AND chips -+ * -+ * 09-24-2004 tglx: add support for hardware controllers (e.g. ECC) shared -+ * among multiple independend devices. Suggestions and initial patch -+ * from Ben Dooks -+ * -+ * 12-05-2004 dmarlin: add workaround for Renesas AG-AND chips "disturb" issue. -+ * Basically, any block not rewritten may lose data when surrounding blocks -+ * are rewritten many times. JFFS2 ensures this doesn't happen for blocks -+ * it uses, but the Bad Block Table(s) may not be rewritten. To ensure they -+ * do not lose data, force them to be rewritten when some of the surrounding -+ * blocks are erased. Rather than tracking a specific nearby block (which -+ * could itself go bad), use a page address 'mask' to select several blocks -+ * in the same area, and rewrite the BBT when any of them are erased. -+ * -+ * 01-03-2005 dmarlin: added support for the device recovery command sequence for Renesas -+ * AG-AND chips. If there was a sudden loss of power during an erase operation, -+ * a "device recovery" operation must be performed when power is restored -+ * to ensure correct operation. -+ * -+ * 01-20-2005 dmarlin: added support for optional hardware specific callback routine to -+ * perform extra error status checks on erase and write failures. This required -+ * adding a wrapper function for nand_read_ecc. -+ * -+ * 08-20-2005 vwool: suspend/resume added -+ * -+ * Credits: -+ * David Woodhouse for adding multichip support -+ * -+ * Aleph One Ltd. and Toby Churchill Ltd. for supporting the -+ * rework for 2K page size chips -+ * -+ * TODO: -+ * Enable cached programming for 2k page size chips -+ * Check, if mtd->ecctype should be set to MTD_ECC_HW -+ * if we have HW ecc support. -+ * The AG-AND chips have nice features for speed improvement, -+ * which are not supported yet. Read / program 4 pages in one go. -+ * -+ * $Id: nand_base.c,v 1.11 2006/11/10 08:55:58 ricardw Exp $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#if 0 -+#include -+#include -+#endif -+ -+#include "mtd.h" -+#include "nand.h" -+#include "nand_ecc.h" -+ -+#if 0 -+#include -+#include -+#include -+#include -+#endif -+ -+#ifdef CONFIG_MTD_PARTITIONS -+#include -+ -+#endif -+ -+#include "lib.h" -+ -+#define GPIO_SYNC 0 -+ -+#undef DEBUG /* from mtd.h */ -+#define DEBUG(n, args...) do { } while(0) -+ -+#define D(x) -+ -+/* Define default oob placement schemes for large and small page devices */ -+static struct nand_oobinfo nand_oob_8 = { -+ .useecc = MTD_NANDECC_AUTOPLACE, -+ .eccbytes = 3, -+ .eccpos = {0, 1, 2}, -+ .oobfree = { {3, 2}, {6, 2} } -+}; -+ -+static struct nand_oobinfo nand_oob_16 = { -+ .useecc = MTD_NANDECC_AUTOPLACE, -+ .eccbytes = 6, -+ .eccpos = {0, 1, 2, 3, 6, 7}, -+ .oobfree = { {8, 8} } -+}; -+ -+static struct nand_oobinfo nand_oob_64 = { -+ .useecc = MTD_NANDECC_AUTOPLACE, -+ .eccbytes = 24, -+ .eccpos = { -+ 40, 41, 42, 43, 44, 45, 46, 47, -+ 48, 49, 50, 51, 52, 53, 54, 55, -+ 56, 57, 58, 59, 60, 61, 62, 63}, -+ .oobfree = { {2, 38} } -+}; -+ -+/* This is used for padding purposes in nand_write_oob */ -+#if NAND_WRITE_SUPPORT -+static u_char ffchars[] = { -+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -+}; -+#endif -+ -+/* -+ * NAND low-level MTD interface functions -+ */ -+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len); -+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len); -+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len); -+ -+static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); -+static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, -+ size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); -+static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); -+static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf); -+static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, -+ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); -+static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf); -+#if NAND_KVEC_SUPPORT -+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, -+ unsigned long count, loff_t to, size_t * retlen); -+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, -+ unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); -+#endif -+static int nand_erase (struct mtd_info *mtd, struct erase_info *instr); -+static void nand_sync (struct mtd_info *mtd); -+ -+/* Some internal functions */ -+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, -+ struct nand_oobinfo *oobsel, int mode); -+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE -+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, -+ u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode); -+#else -+#define nand_verify_pages(...) (0) -+#endif -+ -+static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state); -+ -+/** -+ * nand_release_device - [GENERIC] release chip -+ * @mtd: MTD device structure -+ * -+ * Deselect, release chip lock and wake up anyone waiting on the device -+ */ -+static void nand_release_device (struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ /* De-select the NAND device */ -+ this->select_chip(mtd, -1); -+#if 0 -+ -+ if (this->controller) { -+ /* Release the controller and the chip */ -+ spin_lock(&this->controller->lock); -+ this->controller->active = NULL; -+ this->state = FL_READY; -+ wake_up(&this->controller->wq); -+ spin_unlock(&this->controller->lock); -+ } else { -+ /* Release the chip */ -+ spin_lock(&this->chip_lock); -+ this->state = FL_READY; -+ wake_up(&this->wq); -+ spin_unlock(&this->chip_lock); -+ } -+#endif -+} -+ -+/** -+ * nand_read_byte - [DEFAULT] read one byte from the chip -+ * @mtd: MTD device structure -+ * -+ * Default read function for 8bit buswith -+ */ -+static u_char nand_read_byte(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ return readb(this->IO_ADDR_R); -+} -+ -+/** -+ * nand_write_byte - [DEFAULT] write one byte to the chip -+ * @mtd: MTD device structure -+ * @byte: pointer to data byte to write -+ * -+ * Default write function for 8it buswith -+ */ -+static void nand_write_byte(struct mtd_info *mtd, u_char byte) -+{ -+ struct nand_chip *this = mtd->priv; -+ writeb(byte, this->IO_ADDR_W); -+ -+#if GPIO_SYNC -+ /* Bus sync: Read from address we just wrote. -+ * This generates no signal to the NAND flash, since only chip -+ * select lines are pulled out to the chip, and read is not -+ * gated with chip select for the write area. -+ * Turns out this is (probably) the wrong way to do it; the -+ * right way is to set up suitable wait states in the kernel -+ * config (CONFIG_ETRAX_MEM_GRP3_CONFIG). -+ */ -+ (void) readb(this->IO_ADDR_W); /* that's right, IO_ADDR_W */ -+#endif -+} -+ -+/** -+ * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip -+ * @mtd: MTD device structure -+ * -+ * Default read function for 16bit buswith with -+ * endianess conversion -+ */ -+static u_char nand_read_byte16(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ return (u_char) cpu_to_le16(readw(this->IO_ADDR_R)); -+} -+ -+/** -+ * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip -+ * @mtd: MTD device structure -+ * @byte: pointer to data byte to write -+ * -+ * Default write function for 16bit buswith with -+ * endianess conversion -+ */ -+static void nand_write_byte16(struct mtd_info *mtd, u_char byte) -+{ -+ struct nand_chip *this = mtd->priv; -+ writew(le16_to_cpu((u16) byte), this->IO_ADDR_W); -+} -+ -+/** -+ * nand_read_word - [DEFAULT] read one word from the chip -+ * @mtd: MTD device structure -+ * -+ * Default read function for 16bit buswith without -+ * endianess conversion -+ */ -+static u16 nand_read_word(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ return readw(this->IO_ADDR_R); -+} -+ -+/** -+ * nand_write_word - [DEFAULT] write one word to the chip -+ * @mtd: MTD device structure -+ * @word: data word to write -+ * -+ * Default write function for 16bit buswith without -+ * endianess conversion -+ */ -+static void nand_write_word(struct mtd_info *mtd, u16 word) -+{ -+ struct nand_chip *this = mtd->priv; -+ writew(word, this->IO_ADDR_W); -+} -+ -+/** -+ * nand_select_chip - [DEFAULT] control CE line -+ * @mtd: MTD device structure -+ * @chip: chipnumber to select, -1 for deselect -+ * -+ * Default select function for 1 chip devices. -+ */ -+static void nand_select_chip(struct mtd_info *mtd, int chip) -+{ -+ struct nand_chip *this = mtd->priv; -+ switch(chip) { -+ case -1: -+ this->hwcontrol(mtd, NAND_CTL_CLRNCE); -+ break; -+ case 0: -+ this->hwcontrol(mtd, NAND_CTL_SETNCE); -+ break; -+ -+ default: -+ BUG(); -+ } -+} -+ -+/** -+ * nand_write_buf - [DEFAULT] write buffer to chip -+ * @mtd: MTD device structure -+ * @buf: data buffer -+ * @len: number of bytes to write -+ * -+ * Default write function for 8bit buswith -+ */ -+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) -+{ -+ int i; -+ struct nand_chip *this = mtd->priv; -+ -+ for (i=0; iIO_ADDR_W); -+} -+ -+/** -+ * nand_read_buf - [DEFAULT] read chip data into buffer -+ * @mtd: MTD device structure -+ * @buf: buffer to store date -+ * @len: number of bytes to read -+ * -+ * Default read function for 8bit buswith -+ */ -+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) -+{ -+ int i; -+ struct nand_chip *this = mtd->priv; -+ -+ for (i=0; iIO_ADDR_R); -+} -+ -+/** -+ * nand_verify_buf - [DEFAULT] Verify chip data against buffer -+ * @mtd: MTD device structure -+ * @buf: buffer containing the data to compare -+ * @len: number of bytes to compare -+ * -+ * Default verify function for 8bit buswith -+ */ -+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -+{ -+ int i; -+ struct nand_chip *this = mtd->priv; -+ -+ for (i=0; iIO_ADDR_R)) -+ return -EFAULT; -+ -+ return 0; -+} -+ -+/** -+ * nand_write_buf16 - [DEFAULT] write buffer to chip -+ * @mtd: MTD device structure -+ * @buf: data buffer -+ * @len: number of bytes to write -+ * -+ * Default write function for 16bit buswith -+ */ -+static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len) -+{ -+ int i; -+ struct nand_chip *this = mtd->priv; -+ u16 *p = (u16 *) buf; -+ len >>= 1; -+ -+ for (i=0; iIO_ADDR_W); -+ -+} -+ -+/** -+ * nand_read_buf16 - [DEFAULT] read chip data into buffer -+ * @mtd: MTD device structure -+ * @buf: buffer to store date -+ * @len: number of bytes to read -+ * -+ * Default read function for 16bit buswith -+ */ -+static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len) -+{ -+ int i; -+ struct nand_chip *this = mtd->priv; -+ u16 *p = (u16 *) buf; -+ len >>= 1; -+ -+ for (i=0; iIO_ADDR_R); -+} -+ -+/** -+ * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer -+ * @mtd: MTD device structure -+ * @buf: buffer containing the data to compare -+ * @len: number of bytes to compare -+ * -+ * Default verify function for 16bit buswith -+ */ -+static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) -+{ -+ int i; -+ struct nand_chip *this = mtd->priv; -+ u16 *p = (u16 *) buf; -+ len >>= 1; -+ -+ for (i=0; iIO_ADDR_R)) -+ return -EFAULT; -+ -+ return 0; -+} -+ -+/** -+ * nand_block_bad - [DEFAULT] Read bad block marker from the chip -+ * @mtd: MTD device structure -+ * @ofs: offset from device start -+ * @getchip: 0, if the chip is already selected -+ * -+ * Check, if the block is bad. -+ */ -+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) -+{ -+ int page, chipnr, res = 0; -+ struct nand_chip *this = mtd->priv; -+ u16 bad; -+ -+ if (getchip) { -+ page = (int)(ofs >> this->page_shift); -+ chipnr = (int)(ofs >> this->chip_shift); -+ -+ /* Grab the lock and see if the device is available */ -+ nand_get_device (this, mtd, FL_READING); -+ -+ /* Select the NAND device */ -+ this->select_chip(mtd, chipnr); -+ } else -+ page = (int) ofs; -+ -+ if (this->options & NAND_BUSWIDTH_16) { -+ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask); -+ bad = cpu_to_le16(this->read_word(mtd)); -+ if (this->badblockpos & 0x1) -+ bad >>= 8; -+ if ((bad & 0xFF) != 0xff) -+ res = 1; -+ } else { -+ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask); -+ if (this->read_byte(mtd) != 0xff) -+ res = 1; -+ } -+ -+ if (getchip) { -+ /* Deselect and wake up anyone waiting on the device */ -+ nand_release_device(mtd); -+ } -+ -+ return res; -+} -+ -+/** -+ * nand_default_block_markbad - [DEFAULT] mark a block bad -+ * @mtd: MTD device structure -+ * @ofs: offset from device start -+ * -+ * This is the default implementation, which can be overridden by -+ * a hardware specific driver. -+*/ -+#if NAND_WRITE_SUPPORT -+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) -+{ -+ struct nand_chip *this = mtd->priv; -+ u_char buf[2] = {0, 0}; -+ size_t retlen; -+ int block; -+ -+ /* Get block number */ -+ block = ((int) ofs) >> this->bbt_erase_shift; -+ if (this->bbt) -+ this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); -+ -+#if NAND_BBT_SUPPORT -+ /* Do we have a flash based bad block table ? */ -+ if (this->options & NAND_USE_FLASH_BBT) -+ return nand_update_bbt (mtd, ofs); -+#endif -+ -+ /* We write two bytes, so we dont have to mess with 16 bit access */ -+ ofs += mtd->oobsize + (this->badblockpos & ~0x01); -+ return nand_write_oob (mtd, ofs , 2, &retlen, buf); -+} -+#endif -+ -+/** -+ * nand_check_wp - [GENERIC] check if the chip is write protected -+ * @mtd: MTD device structure -+ * Check, if the device is write protected -+ * -+ * The function expects, that the device is already selected -+ */ -+#if NAND_WRITE_SUPPORT -+static int nand_check_wp (struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ /* Check the WP bit */ -+ this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); -+ return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; -+} -+#endif -+ -+/** -+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad -+ * @mtd: MTD device structure -+ * @ofs: offset from device start -+ * @getchip: 0, if the chip is already selected -+ * @allowbbt: 1, if its allowed to access the bbt area -+ * -+ * Check, if the block is bad. Either by reading the bad block table or -+ * calling of the scan function. -+ */ -+static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ if (!this->bbt) -+ return this->block_bad(mtd, ofs, getchip); -+ -+#if NAND_BBT_SUPPORT -+ /* Return info from the table */ -+ return nand_isbad_bbt (mtd, ofs, allowbbt); -+#endif -+ BUG(); /* should not happen */ -+} -+ -+/* -+ * Wait for the ready pin, after a command -+ * The timeout is catched later. -+ */ -+static void nand_wait_ready(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+#if 0 -+ unsigned long timeo = jiffies + 2; -+#endif -+ -+ /* wait until command is processed or timeout occures */ -+ do { -+ if (this->dev_ready(mtd)) -+ return; -+#if 0 -+ touch_softlockup_watchdog(); -+ } while (time_before(jiffies, timeo)); -+#endif -+ } while (1); -+} -+ -+/** -+ * nand_command - [DEFAULT] Send command to NAND device -+ * @mtd: MTD device structure -+ * @command: the command to be sent -+ * @column: the column address for this command, -1 if none -+ * @page_addr: the page address for this command, -1 if none -+ * -+ * Send command to NAND device. This function is used for small page -+ * devices (256/512 Bytes per page) -+ */ -+static void nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr) -+{ -+ register struct nand_chip *this = mtd->priv; -+ -+ /* Begin command latch cycle */ -+ this->hwcontrol(mtd, NAND_CTL_SETCLE); -+ /* -+ * Write out the command to the device. -+ */ -+ if (command == NAND_CMD_SEQIN) { -+ int readcmd; -+ -+ if (column >= mtd->oobblock) { -+ /* OOB area */ -+ column -= mtd->oobblock; -+ readcmd = NAND_CMD_READOOB; -+ } else if (column < 256) { -+ /* First 256 bytes --> READ0 */ -+ readcmd = NAND_CMD_READ0; -+ } else { -+ column -= 256; -+ readcmd = NAND_CMD_READ1; -+ } -+ this->write_byte(mtd, readcmd); -+ } -+ this->write_byte(mtd, command); -+ -+ /* Set ALE and clear CLE to start address cycle */ -+ this->hwcontrol(mtd, NAND_CTL_CLRCLE); -+ -+ if (column != -1 || page_addr != -1) { -+ this->hwcontrol(mtd, NAND_CTL_SETALE); -+ -+ /* Serially input address */ -+ if (column != -1) { -+ /* Adjust columns for 16 bit buswidth */ -+ if (this->options & NAND_BUSWIDTH_16) -+ column >>= 1; -+ this->write_byte(mtd, column); -+ } -+ if (page_addr != -1) { -+ this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); -+ this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); -+ /* One more address cycle for devices > 32MiB */ -+ if (this->chipsize > (32 << 20)) -+ this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f)); -+ } -+ /* Latch in address */ -+ this->hwcontrol(mtd, NAND_CTL_CLRALE); -+ } -+ -+ /* -+ * program and erase have their own busy handlers -+ * status and sequential in needs no delay -+ */ -+ switch (command) { -+ -+ case NAND_CMD_PAGEPROG: -+ case NAND_CMD_ERASE1: -+ case NAND_CMD_ERASE2: -+ case NAND_CMD_SEQIN: -+ case NAND_CMD_STATUS: -+ return; -+ -+ case NAND_CMD_RESET: -+ if (this->dev_ready) -+ break; -+ udelay(this->chip_delay); -+ this->hwcontrol(mtd, NAND_CTL_SETCLE); -+ this->write_byte(mtd, NAND_CMD_STATUS); -+ this->hwcontrol(mtd, NAND_CTL_CLRCLE); -+ while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); -+ return; -+ -+ /* This applies to read commands */ -+ default: -+ /* -+ * If we don't have access to the busy pin, we apply the given -+ * command delay -+ */ -+ if (!this->dev_ready) { -+ udelay (this->chip_delay); -+ return; -+ } -+ } -+ /* Apply this short delay always to ensure that we do wait tWB in -+ * any case on any machine. */ -+ ndelay (100); -+ -+ nand_wait_ready(mtd); -+} -+ -+/** -+ * nand_command_lp - [DEFAULT] Send command to NAND large page device -+ * @mtd: MTD device structure -+ * @command: the command to be sent -+ * @column: the column address for this command, -1 if none -+ * @page_addr: the page address for this command, -1 if none -+ * -+ * Send command to NAND device. This is the version for the new large page devices -+ * We dont have the seperate regions as we have in the small page devices. -+ * We must emulate NAND_CMD_READOOB to keep the code compatible. -+ * -+ */ -+static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, int page_addr) -+{ -+ register struct nand_chip *this = mtd->priv; -+ -+ /* Emulate NAND_CMD_READOOB */ -+ if (command == NAND_CMD_READOOB) { -+ column += mtd->oobblock; -+ command = NAND_CMD_READ0; -+ } -+ -+ -+ /* Begin command latch cycle */ -+ this->hwcontrol(mtd, NAND_CTL_SETCLE); -+ /* Write out the command to the device. */ -+ this->write_byte(mtd, (command & 0xff)); -+ /* End command latch cycle */ -+ this->hwcontrol(mtd, NAND_CTL_CLRCLE); -+ -+ if (column != -1 || page_addr != -1) { -+ this->hwcontrol(mtd, NAND_CTL_SETALE); -+ -+ /* Serially input address */ -+ if (column != -1) { -+ /* Adjust columns for 16 bit buswidth */ -+ if (this->options & NAND_BUSWIDTH_16) -+ column >>= 1; -+ this->write_byte(mtd, column & 0xff); -+ this->write_byte(mtd, column >> 8); -+ } -+ if (page_addr != -1) { -+ this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); -+ this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); -+ /* One more address cycle for devices > 128MiB */ -+ if (this->chipsize > (128 << 20)) -+ this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0xff)); -+ } -+ /* Latch in address */ -+ this->hwcontrol(mtd, NAND_CTL_CLRALE); -+ } -+ -+ /* -+ * program and erase have their own busy handlers -+ * status, sequential in, and deplete1 need no delay -+ */ -+ switch (command) { -+ -+ case NAND_CMD_CACHEDPROG: -+ case NAND_CMD_PAGEPROG: -+ case NAND_CMD_ERASE1: -+ case NAND_CMD_ERASE2: -+ case NAND_CMD_SEQIN: -+ case NAND_CMD_STATUS: -+ case NAND_CMD_DEPLETE1: -+ return; -+ -+ /* -+ * read error status commands require only a short delay -+ */ -+ case NAND_CMD_STATUS_ERROR: -+ case NAND_CMD_STATUS_ERROR0: -+ case NAND_CMD_STATUS_ERROR1: -+ case NAND_CMD_STATUS_ERROR2: -+ case NAND_CMD_STATUS_ERROR3: -+ udelay(this->chip_delay); -+ return; -+ -+ case NAND_CMD_RESET: -+ if (this->dev_ready) -+ break; -+ udelay(this->chip_delay); -+ this->hwcontrol(mtd, NAND_CTL_SETCLE); -+ this->write_byte(mtd, NAND_CMD_STATUS); -+ this->hwcontrol(mtd, NAND_CTL_CLRCLE); -+ while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); -+ return; -+ -+ case NAND_CMD_READ0: -+ /* Begin command latch cycle */ -+ this->hwcontrol(mtd, NAND_CTL_SETCLE); -+ /* Write out the start read command */ -+ this->write_byte(mtd, NAND_CMD_READSTART); -+ /* End command latch cycle */ -+ this->hwcontrol(mtd, NAND_CTL_CLRCLE); -+ /* Fall through into ready check */ -+ -+ /* This applies to read commands */ -+ default: -+ /* -+ * If we don't have access to the busy pin, we apply the given -+ * command delay -+ */ -+ if (!this->dev_ready) { -+ udelay (this->chip_delay); -+ return; -+ } -+ } -+ -+ /* Apply this short delay always to ensure that we do wait tWB in -+ * any case on any machine. */ -+ ndelay (100); -+ -+ nand_wait_ready(mtd); -+} -+ -+/** -+ * nand_get_device - [GENERIC] Get chip for selected access -+ * @this: the nand chip descriptor -+ * @mtd: MTD device structure -+ * @new_state: the state which is requested -+ * -+ * Get the device and lock it for exclusive access -+ */ -+static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) -+{ -+ this->state = new_state; -+ return 0; -+#if 0 -+ struct nand_chip *active; -+ spinlock_t *lock; -+ wait_queue_head_t *wq; -+ DECLARE_WAITQUEUE (wait, current); -+ -+ lock = (this->controller) ? &this->controller->lock : &this->chip_lock; -+ wq = (this->controller) ? &this->controller->wq : &this->wq; -+retry: -+ active = this; -+ spin_lock(lock); -+ -+ /* Hardware controller shared among independend devices */ -+ if (this->controller) { -+ if (this->controller->active) -+ active = this->controller->active; -+ else -+ this->controller->active = this; -+ } -+ if (active == this && this->state == FL_READY) { -+ this->state = new_state; -+ spin_unlock(lock); -+ return 0; -+ } -+ if (new_state == FL_PM_SUSPENDED) { -+ spin_unlock(lock); -+ return (this->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN; -+ } -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ add_wait_queue(wq, &wait); -+ spin_unlock(lock); -+ schedule(); -+ remove_wait_queue(wq, &wait); -+ goto retry; -+#endif -+} -+ -+/** -+ * nand_wait - [DEFAULT] wait until the command is done -+ * @mtd: MTD device structure -+ * @this: NAND chip structure -+ * @state: state to select the max. timeout value -+ * -+ * Wait for command done. This applies to erase and program only -+ * Erase can take up to 400ms and program up to 20ms according to -+ * general NAND and SmartMedia specs -+ * -+*/ -+static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) -+{ -+ -+#if 0 -+ unsigned long timeo = jiffies; -+#endif -+ int status; -+ -+#if 0 -+ if (state == FL_ERASING) -+ timeo += (HZ * 400) / 1000; -+ else -+ timeo += (HZ * 20) / 1000; -+#endif -+ -+ /* Apply this short delay always to ensure that we do wait tWB in -+ * any case on any machine. */ -+ ndelay (100); -+ -+ if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) -+ this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1); -+ else -+ this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); -+ -+#if 0 -+ while (time_before(jiffies, timeo)) { -+ /* Check, if we were interrupted */ -+ if (this->state != state) -+ return 0; -+#endif -+ while (1) { /* wait indefinitely */ -+ -+ if (this->dev_ready) { -+ if (this->dev_ready(mtd)) -+ break; -+ } else { -+ if (this->read_byte(mtd) & NAND_STATUS_READY) -+ break; -+ } -+ -+#if 0 -+ cond_resched(); -+#endif -+ } -+ status = (int) this->read_byte(mtd); -+ return status; -+} -+ -+/** -+ * nand_write_page - [GENERIC] write one page -+ * @mtd: MTD device structure -+ * @this: NAND chip structure -+ * @page: startpage inside the chip, must be called with (page & this->pagemask) -+ * @oob_buf: out of band data buffer -+ * @oobsel: out of band selecttion structre -+ * @cached: 1 = enable cached programming if supported by chip -+ * -+ * Nand_page_program function is used for write and writev ! -+ * This function will always program a full page of data -+ * If you call it with a non page aligned buffer, you're lost :) -+ * -+ * Cached programming is not supported yet. -+ */ -+#if NAND_WRITE_SUPPORT -+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, -+ u_char *oob_buf, struct nand_oobinfo *oobsel, int cached) -+{ -+ int i, status; -+ u_char ecc_code[32]; -+ int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; -+ int *oob_config = oobsel->eccpos; -+ int datidx = 0, eccidx = 0, eccsteps = this->eccsteps; -+ int eccbytes = 0; -+ -+ /* FIXME: Enable cached programming */ -+ cached = 0; -+ -+ /* Send command to begin auto page programming */ -+ this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page); -+ -+ /* Write out complete page of data, take care of eccmode */ -+ switch (eccmode) { -+ /* No ecc, write all */ -+ case NAND_ECC_NONE: -+ puts ("Writing data without ECC to NAND-FLASH is not recommended\r\n"); -+ this->write_buf(mtd, this->data_poi, mtd->oobblock); -+ break; -+ -+ /* Software ecc 3/256, write all */ -+ case NAND_ECC_SOFT: -+ for (; eccsteps; eccsteps--) { -+ this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code); -+ for (i = 0; i < 3; i++, eccidx++) -+ oob_buf[oob_config[eccidx]] = ecc_code[i]; -+ datidx += this->eccsize; -+ } -+ this->write_buf(mtd, this->data_poi, mtd->oobblock); -+ break; -+ default: -+ eccbytes = this->eccbytes; -+ for (; eccsteps; eccsteps--) { -+ /* enable hardware ecc logic for write */ -+ this->enable_hwecc(mtd, NAND_ECC_WRITE); -+ this->write_buf(mtd, &this->data_poi[datidx], this->eccsize); -+ this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code); -+ for (i = 0; i < eccbytes; i++, eccidx++) -+ oob_buf[oob_config[eccidx]] = ecc_code[i]; -+ /* If the hardware ecc provides syndromes then -+ * the ecc code must be written immidiately after -+ * the data bytes (words) */ -+ if (this->options & NAND_HWECC_SYNDROME) -+ this->write_buf(mtd, ecc_code, eccbytes); -+ datidx += this->eccsize; -+ } -+ break; -+ } -+ -+ /* Write out OOB data */ -+ if (this->options & NAND_HWECC_SYNDROME) -+ this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes); -+ else -+ this->write_buf(mtd, oob_buf, mtd->oobsize); -+ -+ /* Send command to actually program the data */ -+ this->cmdfunc (mtd, cached ? NAND_CMD_CACHEDPROG : NAND_CMD_PAGEPROG, -1, -1); -+ -+ if (!cached) { -+ /* call wait ready function */ -+ status = this->waitfunc (mtd, this, FL_WRITING); -+ -+ /* See if operation failed and additional status checks are available */ -+ if ((status & NAND_STATUS_FAIL) && (this->errstat)) { -+ status = this->errstat(mtd, this, FL_WRITING, status, page); -+ } -+ -+ /* See if device thinks it succeeded */ -+ if (status & NAND_STATUS_FAIL) { -+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page); -+ return -EIO; -+ } -+ } else { -+ /* FIXME: Implement cached programming ! */ -+ /* wait until cache is ready*/ -+ // status = this->waitfunc (mtd, this, FL_CACHEDRPG); -+ } -+ return 0; -+} -+#endif -+ -+#if NAND_WRITE_SUPPORT -+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE -+/** -+ * nand_verify_pages - [GENERIC] verify the chip contents after a write -+ * @mtd: MTD device structure -+ * @this: NAND chip structure -+ * @page: startpage inside the chip, must be called with (page & this->pagemask) -+ * @numpages: number of pages to verify -+ * @oob_buf: out of band data buffer -+ * @oobsel: out of band selecttion structre -+ * @chipnr: number of the current chip -+ * @oobmode: 1 = full buffer verify, 0 = ecc only -+ * -+ * The NAND device assumes that it is always writing to a cleanly erased page. -+ * Hence, it performs its internal write verification only on bits that -+ * transitioned from 1 to 0. The device does NOT verify the whole page on a -+ * byte by byte basis. It is possible that the page was not completely erased -+ * or the page is becoming unusable due to wear. The read with ECC would catch -+ * the error later when the ECC page check fails, but we would rather catch -+ * it early in the page write stage. Better to write no data than invalid data. -+ */ -+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, -+ u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode) -+{ -+ int i, j, datidx = 0, oobofs = 0, res = -EIO; -+ int eccsteps = this->eccsteps; -+ int hweccbytes; -+ u_char oobdata[64]; -+ -+ hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0; -+ -+ /* Send command to read back the first page */ -+ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page); -+ -+ for(;;) { -+ for (j = 0; j < eccsteps; j++) { -+ /* Loop through and verify the data */ -+ if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) { -+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); -+ goto out; -+ } -+ datidx += mtd->eccsize; -+ /* Have we a hw generator layout ? */ -+ if (!hweccbytes) -+ continue; -+ if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) { -+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); -+ goto out; -+ } -+ oobofs += hweccbytes; -+ } -+ -+ /* check, if we must compare all data or if we just have to -+ * compare the ecc bytes -+ */ -+ if (oobmode) { -+ if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) { -+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); -+ goto out; -+ } -+ } else { -+ /* Read always, else autoincrement fails */ -+ this->read_buf(mtd, oobdata, mtd->oobsize - hweccbytes * eccsteps); -+ -+ if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) { -+ int ecccnt = oobsel->eccbytes; -+ -+ for (i = 0; i < ecccnt; i++) { -+ int idx = oobsel->eccpos[i]; -+ if (oobdata[idx] != oob_buf[oobofs + idx] ) { -+ DEBUG (MTD_DEBUG_LEVEL0, -+ "%s: Failed ECC write " -+ "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i); -+ goto out; -+ } -+ } -+ } -+ } -+ oobofs += mtd->oobsize - hweccbytes * eccsteps; -+ page++; -+ numpages--; -+ -+ /* Apply delay or wait for ready/busy pin -+ * Do this before the AUTOINCR check, so no problems -+ * arise if a chip which does auto increment -+ * is marked as NOAUTOINCR by the board driver. -+ * Do this also before returning, so the chip is -+ * ready for the next command. -+ */ -+ if (!this->dev_ready) -+ udelay (this->chip_delay); -+ else -+ nand_wait_ready(mtd); -+ -+ /* All done, return happy */ -+ if (!numpages) -+ return 0; -+ -+ -+ /* Check, if the chip supports auto page increment */ -+ if (!NAND_CANAUTOINCR(this)) -+ this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page); -+ } -+ /* -+ * Terminate the read command. We come here in case of an error -+ * So we must issue a reset command. -+ */ -+out: -+ this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1); -+ return res; -+} -+#endif -+#endif -+ -+/** -+ * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc -+ * @mtd: MTD device structure -+ * @from: offset to read from -+ * @len: number of bytes to read -+ * @retlen: pointer to variable to store the number of read bytes -+ * @buf: the databuffer to put data -+ * -+ * This function simply calls nand_do_read_ecc with oob buffer and oobsel = NULL -+ * and flags = 0xff -+ */ -+static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) -+{ -+ return nand_do_read_ecc (mtd, from, len, retlen, buf, NULL, &mtd->oobinfo, 0xff); -+} -+ -+ -+/** -+ * nand_read_ecc - [MTD Interface] MTD compability function for nand_do_read_ecc -+ * @mtd: MTD device structure -+ * @from: offset to read from -+ * @len: number of bytes to read -+ * @retlen: pointer to variable to store the number of read bytes -+ * @buf: the databuffer to put data -+ * @oob_buf: filesystem supplied oob data buffer -+ * @oobsel: oob selection structure -+ * -+ * This function simply calls nand_do_read_ecc with flags = 0xff -+ */ -+static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, -+ size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel) -+{ -+ /* use userspace supplied oobinfo, if zero */ -+ if (oobsel == NULL) -+ oobsel = &mtd->oobinfo; -+ return nand_do_read_ecc(mtd, from, len, retlen, buf, oob_buf, oobsel, 0xff); -+} -+ -+ -+/** -+ * nand_do_read_ecc - [MTD Interface] Read data with ECC -+ * @mtd: MTD device structure -+ * @from: offset to read from -+ * @len: number of bytes to read -+ * @retlen: pointer to variable to store the number of read bytes -+ * @buf: the databuffer to put data -+ * @oob_buf: filesystem supplied oob data buffer (can be NULL) -+ * @oobsel: oob selection structure -+ * @flags: flag to indicate if nand_get_device/nand_release_device should be preformed -+ * and how many corrected error bits are acceptable: -+ * bits 0..7 - number of tolerable errors -+ * bit 8 - 0 == do not get/release chip, 1 == get/release chip -+ * -+ * NAND read with ECC -+ */ -+int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, -+ size_t * retlen, u_char * buf, u_char * oob_buf, -+ struct nand_oobinfo *oobsel, int flags) -+{ -+ -+ int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1; -+ int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0; -+ struct nand_chip *this = mtd->priv; -+ u_char *data_poi, *oob_data = oob_buf; -+ u_char ecc_calc[32]; -+ u_char ecc_code[32]; -+ int eccmode, eccsteps; -+ int *oob_config, datidx; -+ int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; -+ int eccbytes; -+ int compareecc = 1; -+ int oobreadlen; -+ -+ -+ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); -+ D( -+ puts ("nand_read_ecc: from = "); -+ putx (from); -+ puts (", len = "); -+ putx(len); -+ putnl(); -+ ) -+ -+ /* Do not allow reads past end of device */ -+ if ((from + len) > mtd->size) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n"); -+ D(puts("nand_read_ecc: Attempt read beyond end of device\r\n")); -+ *retlen = 0; -+ return -EINVAL; -+ } -+ -+ /* Grab the lock and see if the device is available */ -+ if (flags & NAND_GET_DEVICE) -+ nand_get_device (this, mtd, FL_READING); -+ -+ /* Autoplace of oob data ? Use the default placement scheme */ -+ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) -+ oobsel = this->autooob; -+ -+ eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; -+ oob_config = oobsel->eccpos; -+ -+ /* Select the NAND device */ -+ chipnr = (int)(from >> this->chip_shift); -+ this->select_chip(mtd, chipnr); -+ -+ /* First we calculate the starting page */ -+ realpage = (int) (from >> this->page_shift); -+ page = realpage & this->pagemask; -+ -+ /* Get raw starting column */ -+ col = from & (mtd->oobblock - 1); -+ -+ end = mtd->oobblock; -+ ecc = this->eccsize; -+ eccbytes = this->eccbytes; -+ -+ if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME)) -+ compareecc = 0; -+ -+ oobreadlen = mtd->oobsize; -+ if (this->options & NAND_HWECC_SYNDROME) -+ oobreadlen -= oobsel->eccbytes; -+ -+ /* Loop until all data read */ -+ while (read < len) { -+ -+ int aligned = (!col && (len - read) >= end); -+ /* -+ * If the read is not page aligned, we have to read into data buffer -+ * due to ecc, else we read into return buffer direct -+ */ -+ if (aligned) -+ data_poi = &buf[read]; -+ else -+ data_poi = this->data_buf; -+ -+ /* Check, if we have this page in the buffer -+ * -+ * FIXME: Make it work when we must provide oob data too, -+ * check the usage of data_buf oob field -+ */ -+ if (realpage == this->pagebuf && !oob_buf) { -+ /* aligned read ? */ -+ if (aligned) -+ memcpy (data_poi, this->data_buf, end); -+ goto readdata; -+ } -+ -+ /* Check, if we must send the read command */ -+ if (sndcmd) { -+ this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page); -+ sndcmd = 0; -+ } -+ -+ /* get oob area, if we have no oob buffer from fs-driver */ -+ if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE || -+ oobsel->useecc == MTD_NANDECC_AUTOPL_USR) -+ oob_data = &this->data_buf[end]; -+ -+ eccsteps = this->eccsteps; -+ -+ switch (eccmode) { -+ case NAND_ECC_NONE: { /* No ECC, Read in a page */ -+#if 0 -+ static unsigned long lastwhinge = 0; -+ if ((lastwhinge / HZ) != (jiffies / HZ)) { -+ puts ("Reading data from NAND FLASH without ECC is not recommended\r\n"); -+ lastwhinge = jiffies; -+ } -+#endif -+ this->read_buf(mtd, data_poi, end); -+ break; -+ } -+ -+ case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */ -+ this->read_buf(mtd, data_poi, end); -+ for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc) -+ this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]); -+ break; -+ -+ default: -+#if NAND_HWECC_SUPPORT -+ for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) { -+ this->enable_hwecc(mtd, NAND_ECC_READ); -+ this->read_buf(mtd, &data_poi[datidx], ecc); -+ -+ /* HW ecc with syndrome calculation must read the -+ * syndrome from flash immidiately after the data */ -+ if (!compareecc) { -+ /* Some hw ecc generators need to know when the -+ * syndrome is read from flash */ -+ this->enable_hwecc(mtd, NAND_ECC_READSYN); -+ this->read_buf(mtd, &oob_data[i], eccbytes); -+ /* We calc error correction directly, it checks the hw -+ * generator for an error, reads back the syndrome and -+ * does the error correction on the fly */ -+ ecc_status = this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]); -+ if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " -+ "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr); -+ ecc_failed++; -+ } -+ } else { -+ this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]); -+ } -+ } -+#endif -+ break; -+ } -+ -+ /* read oobdata */ -+ this->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen); -+ -+ /* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */ -+ if (!compareecc) -+ goto readoob; -+ -+ /* Pick the ECC bytes out of the oob data */ -+ for (j = 0; j < oobsel->eccbytes; j++) -+ ecc_code[j] = oob_data[oob_config[j]]; -+ -+ /* correct data, if neccecary */ -+ for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) { -+ ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]); -+ -+ /* Get next chunk of ecc bytes */ -+ j += eccbytes; -+ -+ /* Check, if we have a fs supplied oob-buffer, -+ * This is the legacy mode. Used by YAFFS1 -+ * Should go away some day -+ */ -+ if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) { -+ int *p = (int *)(&oob_data[mtd->oobsize]); -+ p[i] = ecc_status; -+ } -+ -+ if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page); -+ D( -+ puts ("nand_read_ecc: " "Failed ECC read, page "); -+ putx (page); -+ putnl(); -+ ) -+ ecc_failed++; -+ } -+ } -+ -+ readoob: -+ /* check, if we have a fs supplied oob-buffer */ -+ if (oob_buf) { -+ /* without autoplace. Legacy mode used by YAFFS1 */ -+ switch(oobsel->useecc) { -+ case MTD_NANDECC_AUTOPLACE: -+ case MTD_NANDECC_AUTOPL_USR: -+ /* Walk through the autoplace chunks */ -+ for (i = 0; oobsel->oobfree[i][1]; i++) { -+ int from = oobsel->oobfree[i][0]; -+ int num = oobsel->oobfree[i][1]; -+ memcpy(&oob_buf[oob], &oob_data[from], num); -+ oob += num; -+ } -+ break; -+ case MTD_NANDECC_PLACE: -+ /* YAFFS1 legacy mode */ -+ oob_data += this->eccsteps * sizeof (int); -+ default: -+ oob_data += mtd->oobsize; -+ } -+ } -+ readdata: -+ /* Partial page read, transfer data into fs buffer */ -+ if (!aligned) { -+ for (j = col; j < end && read < len; j++) -+ buf[read++] = data_poi[j]; -+ this->pagebuf = realpage; -+ } else -+ read += mtd->oobblock; -+ -+ /* Apply delay or wait for ready/busy pin -+ * Do this before the AUTOINCR check, so no problems -+ * arise if a chip which does auto increment -+ * is marked as NOAUTOINCR by the board driver. -+ */ -+ if (!this->dev_ready) -+ udelay (this->chip_delay); -+ else -+ nand_wait_ready(mtd); -+ -+ if (read == len) -+ break; -+ -+ /* For subsequent reads align to page boundary. */ -+ col = 0; -+ /* Increment page address */ -+ realpage++; -+ -+ page = realpage & this->pagemask; -+ /* Check, if we cross a chip boundary */ -+ if (!page) { -+ chipnr++; -+ this->select_chip(mtd, -1); -+ this->select_chip(mtd, chipnr); -+ } -+ /* Check, if the chip supports auto page increment -+ * or if we have hit a block boundary. -+ */ -+ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) -+ sndcmd = 1; -+ } -+ -+ /* Deselect and wake up anyone waiting on the device */ -+ if (flags & NAND_GET_DEVICE) -+ nand_release_device(mtd); -+ -+ /* -+ * Return success, if no ECC failures, else -EBADMSG -+ * fs driver will take care of that, because -+ * retlen == desired len and result == -EBADMSG -+ */ -+ *retlen = read; -+ return ecc_failed ? -EBADMSG : 0; -+} -+ -+/** -+ * nand_read_oob - [MTD Interface] NAND read out-of-band -+ * @mtd: MTD device structure -+ * @from: offset to read from -+ * @len: number of bytes to read -+ * @retlen: pointer to variable to store the number of read bytes -+ * @buf: the databuffer to put data -+ * -+ * NAND read out-of-band data from the spare area -+ */ -+static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) -+{ -+ int i, col, page, chipnr; -+ struct nand_chip *this = mtd->priv; -+ int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; -+ -+ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); -+ -+ /* Shift to get page */ -+ page = (int)(from >> this->page_shift); -+ chipnr = (int)(from >> this->chip_shift); -+ -+ /* Mask to get column */ -+ col = from & (mtd->oobsize - 1); -+ -+ /* Initialize return length value */ -+ *retlen = 0; -+ -+ /* Do not allow reads past end of device */ -+ if ((from + len) > mtd->size) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n"); -+ *retlen = 0; -+ return -EINVAL; -+ } -+ -+ /* Grab the lock and see if the device is available */ -+ nand_get_device (this, mtd , FL_READING); -+ -+ /* Select the NAND device */ -+ this->select_chip(mtd, chipnr); -+ -+ /* Send the read command */ -+ this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask); -+ /* -+ * Read the data, if we read more than one page -+ * oob data, let the device transfer the data ! -+ */ -+ i = 0; -+ while (i < len) { -+ int thislen = mtd->oobsize - col; -+ thislen = min_t(int, thislen, len); -+ this->read_buf(mtd, &buf[i], thislen); -+ i += thislen; -+ -+ /* Read more ? */ -+ if (i < len) { -+ page++; -+ col = 0; -+ -+ /* Check, if we cross a chip boundary */ -+ if (!(page & this->pagemask)) { -+ chipnr++; -+ this->select_chip(mtd, -1); -+ this->select_chip(mtd, chipnr); -+ } -+ -+ /* Apply delay or wait for ready/busy pin -+ * Do this before the AUTOINCR check, so no problems -+ * arise if a chip which does auto increment -+ * is marked as NOAUTOINCR by the board driver. -+ */ -+ if (!this->dev_ready) -+ udelay (this->chip_delay); -+ else -+ nand_wait_ready(mtd); -+ -+ /* Check, if the chip supports auto page increment -+ * or if we have hit a block boundary. -+ */ -+ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) { -+ /* For subsequent page reads set offset to 0 */ -+ this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask); -+ } -+ } -+ } -+ -+ /* Deselect and wake up anyone waiting on the device */ -+ nand_release_device(mtd); -+ -+ /* Return happy */ -+ *retlen = len; -+ return 0; -+} -+ -+/** -+ * nand_read_raw - [GENERIC] Read raw data including oob into buffer -+ * @mtd: MTD device structure -+ * @buf: temporary buffer -+ * @from: offset to read from -+ * @len: number of bytes to read -+ * @ooblen: number of oob data bytes to read -+ * -+ * Read raw data including oob into buffer -+ */ -+int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen) -+{ -+ struct nand_chip *this = mtd->priv; -+ int page = (int) (from >> this->page_shift); -+ int chip = (int) (from >> this->chip_shift); -+ int sndcmd = 1; -+ int cnt = 0; -+ int pagesize = mtd->oobblock + mtd->oobsize; -+ int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; -+ -+ /* Do not allow reads past end of device */ -+ if ((from + len) > mtd->size) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n"); -+ return -EINVAL; -+ } -+ -+ /* Grab the lock and see if the device is available */ -+ nand_get_device (this, mtd , FL_READING); -+ -+ this->select_chip (mtd, chip); -+ -+ /* Add requested oob length */ -+ len += ooblen; -+ -+ while (len) { -+ if (sndcmd) -+ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask); -+ sndcmd = 0; -+ -+ this->read_buf (mtd, &buf[cnt], pagesize); -+ -+ len -= pagesize; -+ cnt += pagesize; -+ page++; -+ -+ if (!this->dev_ready) -+ udelay (this->chip_delay); -+ else -+ nand_wait_ready(mtd); -+ -+ /* Check, if the chip supports auto page increment */ -+ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) -+ sndcmd = 1; -+ } -+ -+ /* Deselect and wake up anyone waiting on the device */ -+ nand_release_device(mtd); -+ return 0; -+} -+ -+ -+/** -+ * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer -+ * @mtd: MTD device structure -+ * @fsbuf: buffer given by fs driver -+ * @oobsel: out of band selection structre -+ * @autoplace: 1 = place given buffer into the oob bytes -+ * @numpages: number of pages to prepare -+ * -+ * Return: -+ * 1. Filesystem buffer available and autoplacement is off, -+ * return filesystem buffer -+ * 2. No filesystem buffer or autoplace is off, return internal -+ * buffer -+ * 3. Filesystem buffer is given and autoplace selected -+ * put data from fs buffer into internal buffer and -+ * retrun internal buffer -+ * -+ * Note: The internal buffer is filled with 0xff. This must -+ * be done only once, when no autoplacement happens -+ * Autoplacement sets the buffer dirty flag, which -+ * forces the 0xff fill before using the buffer again. -+ * -+*/ -+#if NAND_WRITE_SUPPORT -+static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel, -+ int autoplace, int numpages) -+{ -+ struct nand_chip *this = mtd->priv; -+ int i, len, ofs; -+ -+ /* Zero copy fs supplied buffer */ -+ if (fsbuf && !autoplace) -+ return fsbuf; -+ -+ /* Check, if the buffer must be filled with ff again */ -+ if (this->oobdirty) { -+ memset (this->oob_buf, 0xff, -+ mtd->oobsize << (this->phys_erase_shift - this->page_shift)); -+ this->oobdirty = 0; -+ } -+ -+ /* If we have no autoplacement or no fs buffer use the internal one */ -+ if (!autoplace || !fsbuf) -+ return this->oob_buf; -+ -+ /* Walk through the pages and place the data */ -+ this->oobdirty = 1; -+ ofs = 0; -+ while (numpages--) { -+ for (i = 0, len = 0; len < mtd->oobavail; i++) { -+ int to = ofs + oobsel->oobfree[i][0]; -+ int num = oobsel->oobfree[i][1]; -+ memcpy (&this->oob_buf[to], fsbuf, num); -+ len += num; -+ fsbuf += num; -+ } -+ ofs += mtd->oobavail; -+ } -+ return this->oob_buf; -+} -+#endif -+ -+#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0 -+ -+/** -+ * nand_write - [MTD Interface] compability function for nand_write_ecc -+ * @mtd: MTD device structure -+ * @to: offset to write to -+ * @len: number of bytes to write -+ * @retlen: pointer to variable to store the number of written bytes -+ * @buf: the data to write -+ * -+ * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL -+ * -+*/ -+#if NAND_WRITE_SUPPORT -+static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) -+{ -+ return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL)); -+} -+#endif -+ -+/** -+ * nand_write_ecc - [MTD Interface] NAND write with ECC -+ * @mtd: MTD device structure -+ * @to: offset to write to -+ * @len: number of bytes to write -+ * @retlen: pointer to variable to store the number of written bytes -+ * @buf: the data to write -+ * @eccbuf: filesystem supplied oob data buffer -+ * @oobsel: oob selection structure -+ * -+ * NAND write with ECC -+ */ -+#if NAND_WRITE_SUPPORT -+static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, -+ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel) -+{ -+ int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr; -+ int autoplace = 0, numpages, totalpages; -+ struct nand_chip *this = mtd->priv; -+ u_char *oobbuf, *bufstart; -+ int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); -+ -+ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); -+ -+ /* Initialize retlen, in case of early exit */ -+ *retlen = 0; -+ -+ /* Do not allow write past end of device */ -+ if ((to + len) > mtd->size) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n"); -+ return -EINVAL; -+ } -+ -+ /* reject writes, which are not page aligned */ -+ if (NOTALIGNED (to) || NOTALIGNED(len)) { -+ puts ("nand_write_ecc: Attempt to write not page aligned data\r\n"); -+ return -EINVAL; -+ } -+ -+ /* Grab the lock and see if the device is available */ -+ nand_get_device (this, mtd, FL_WRITING); -+ -+ /* Calculate chipnr */ -+ chipnr = (int)(to >> this->chip_shift); -+ /* Select the NAND device */ -+ this->select_chip(mtd, chipnr); -+ -+ /* Check, if it is write protected */ -+ if (nand_check_wp(mtd)) -+ goto out; -+ -+ /* if oobsel is NULL, use chip defaults */ -+ if (oobsel == NULL) -+ oobsel = &mtd->oobinfo; -+ -+ /* Autoplace of oob data ? Use the default placement scheme */ -+ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { -+ oobsel = this->autooob; -+ autoplace = 1; -+ } -+ if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) -+ autoplace = 1; -+ -+ /* Setup variables and oob buffer */ -+ totalpages = len >> this->page_shift; -+ page = (int) (to >> this->page_shift); -+ /* Invalidate the page cache, if we write to the cached page */ -+ if (page <= this->pagebuf && this->pagebuf < (page + totalpages)) -+ this->pagebuf = -1; -+ -+ /* Set it relative to chip */ -+ page &= this->pagemask; -+ startpage = page; -+ /* Calc number of pages we can write in one go */ -+ numpages = min (ppblock - (startpage & (ppblock - 1)), totalpages); -+ oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages); -+ bufstart = (u_char *)buf; -+ -+ /* Loop until all data is written */ -+ while (written < len) { -+ -+ this->data_poi = (u_char*) &buf[written]; -+ /* Write one page. If this is the last page to write -+ * or the last page in this block, then use the -+ * real pageprogram command, else select cached programming -+ * if supported by the chip. -+ */ -+ ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0)); -+ if (ret) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret); -+ goto out; -+ } -+ /* Next oob page */ -+ oob += mtd->oobsize; -+ /* Update written bytes count */ -+ written += mtd->oobblock; -+ if (written == len) -+ goto cmp; -+ -+ /* Increment page address */ -+ page++; -+ -+ /* Have we hit a block boundary ? Then we have to verify and -+ * if verify is ok, we have to setup the oob buffer for -+ * the next pages. -+ */ -+ if (!(page & (ppblock - 1))){ -+ int ofs; -+ this->data_poi = bufstart; -+ ret = nand_verify_pages (mtd, this, startpage, -+ page - startpage, -+ oobbuf, oobsel, chipnr, (eccbuf != NULL)); -+ if (ret) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); -+ goto out; -+ } -+ *retlen = written; -+ -+ ofs = autoplace ? mtd->oobavail : mtd->oobsize; -+ if (eccbuf) -+ eccbuf += (page - startpage) * ofs; -+ totalpages -= page - startpage; -+ numpages = min (totalpages, ppblock); -+ page &= this->pagemask; -+ startpage = page; -+ oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, -+ autoplace, numpages); -+ oob = 0; -+ /* Check, if we cross a chip boundary */ -+ if (!page) { -+ chipnr++; -+ this->select_chip(mtd, -1); -+ this->select_chip(mtd, chipnr); -+ } -+ } -+ } -+ /* Verify the remaining pages */ -+cmp: -+ this->data_poi = bufstart; -+ ret = nand_verify_pages (mtd, this, startpage, totalpages, -+ oobbuf, oobsel, chipnr, (eccbuf != NULL)); -+ if (!ret) -+ *retlen = written; -+ else -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); -+ -+out: -+ /* Deselect and wake up anyone waiting on the device */ -+ nand_release_device(mtd); -+ -+ return ret; -+} -+#endif -+ -+ -+/** -+ * nand_write_oob - [MTD Interface] NAND write out-of-band -+ * @mtd: MTD device structure -+ * @to: offset to write to -+ * @len: number of bytes to write -+ * @retlen: pointer to variable to store the number of written bytes -+ * @buf: the data to write -+ * -+ * NAND write out-of-band -+ */ -+#if NAND_WRITE_SUPPORT -+static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) -+{ -+ int column, page, status, ret = -EIO, chipnr; -+ struct nand_chip *this = mtd->priv; -+ -+ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); -+ -+ /* Shift to get page */ -+ page = (int) (to >> this->page_shift); -+ chipnr = (int) (to >> this->chip_shift); -+ -+ /* Mask to get column */ -+ column = to & (mtd->oobsize - 1); -+ -+ /* Initialize return length value */ -+ *retlen = 0; -+ -+ /* Do not allow write past end of page */ -+ if ((column + len) > mtd->oobsize) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n"); -+ return -EINVAL; -+ } -+ -+ /* Grab the lock and see if the device is available */ -+ nand_get_device (this, mtd, FL_WRITING); -+ -+ /* Select the NAND device */ -+ this->select_chip(mtd, chipnr); -+ -+ /* Reset the chip. Some chips (like the Toshiba TC5832DC found -+ in one of my DiskOnChip 2000 test units) will clear the whole -+ data page too if we don't do this. I have no clue why, but -+ I seem to have 'fixed' it in the doc2000 driver in -+ August 1999. dwmw2. */ -+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); -+ -+ /* Check, if it is write protected */ -+ if (nand_check_wp(mtd)) -+ goto out; -+ -+ /* Invalidate the page cache, if we write to the cached page */ -+ if (page == this->pagebuf) -+ this->pagebuf = -1; -+ -+ if (NAND_MUST_PAD(this)) { -+ /* Write out desired data */ -+ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask); -+ /* prepad 0xff for partial programming */ -+ this->write_buf(mtd, ffchars, column); -+ /* write data */ -+ this->write_buf(mtd, buf, len); -+ /* postpad 0xff for partial programming */ -+ this->write_buf(mtd, ffchars, mtd->oobsize - (len+column)); -+ } else { -+ /* Write out desired data */ -+ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock + column, page & this->pagemask); -+ /* write data */ -+ this->write_buf(mtd, buf, len); -+ } -+ /* Send command to program the OOB data */ -+ this->cmdfunc (mtd, NAND_CMD_PAGEPROG, -1, -1); -+ -+ status = this->waitfunc (mtd, this, FL_WRITING); -+ -+ /* See if device thinks it succeeded */ -+ if (status & NAND_STATUS_FAIL) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page); -+ ret = -EIO; -+ goto out; -+ } -+ /* Return happy */ -+ *retlen = len; -+ -+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE -+ /* Send command to read back the data */ -+ this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask); -+ -+ if (this->verify_buf(mtd, buf, len)) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page); -+ ret = -EIO; -+ goto out; -+ } -+#endif -+ ret = 0; -+out: -+ /* Deselect and wake up anyone waiting on the device */ -+ nand_release_device(mtd); -+ -+ return ret; -+} -+#endif -+ -+ -+/** -+ * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc -+ * @mtd: MTD device structure -+ * @vecs: the iovectors to write -+ * @count: number of vectors -+ * @to: offset to write to -+ * @retlen: pointer to variable to store the number of written bytes -+ * -+ * NAND write with kvec. This just calls the ecc function -+ */ -+#if NAND_KVEC_SUPPORT -+#if NAND_WRITE_SUPPORT -+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, -+ loff_t to, size_t * retlen) -+{ -+ return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL)); -+} -+#endif -+#endif -+ -+/** -+ * nand_writev_ecc - [MTD Interface] write with iovec with ecc -+ * @mtd: MTD device structure -+ * @vecs: the iovectors to write -+ * @count: number of vectors -+ * @to: offset to write to -+ * @retlen: pointer to variable to store the number of written bytes -+ * @eccbuf: filesystem supplied oob data buffer -+ * @oobsel: oob selection structure -+ * -+ * NAND write with iovec with ecc -+ */ -+#if NAND_KVEC_SUPPORT -+#if NAND_WRITE_SUPPORT -+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, -+ loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel) -+{ -+ int i, page, len, total_len, ret = -EIO, written = 0, chipnr; -+ int oob, numpages, autoplace = 0, startpage; -+ struct nand_chip *this = mtd->priv; -+ int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); -+ u_char *oobbuf, *bufstart; -+ -+ /* Preset written len for early exit */ -+ *retlen = 0; -+ -+ /* Calculate total length of data */ -+ total_len = 0; -+ for (i = 0; i < count; i++) -+ total_len += (int) vecs[i].iov_len; -+ -+ DEBUG (MTD_DEBUG_LEVEL3, -+ "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count); -+ -+ /* Do not allow write past end of page */ -+ if ((to + total_len) > mtd->size) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n"); -+ return -EINVAL; -+ } -+ -+ /* reject writes, which are not page aligned */ -+ if (NOTALIGNED (to) || NOTALIGNED(total_len)) { -+ puts ("nand_write_ecc: Attempt to write not page aligned data\r\n"); -+ return -EINVAL; -+ } -+ -+ /* Grab the lock and see if the device is available */ -+ nand_get_device (this, mtd, FL_WRITING); -+ -+ /* Get the current chip-nr */ -+ chipnr = (int) (to >> this->chip_shift); -+ /* Select the NAND device */ -+ this->select_chip(mtd, chipnr); -+ -+ /* Check, if it is write protected */ -+ if (nand_check_wp(mtd)) -+ goto out; -+ -+ /* if oobsel is NULL, use chip defaults */ -+ if (oobsel == NULL) -+ oobsel = &mtd->oobinfo; -+ -+ /* Autoplace of oob data ? Use the default placement scheme */ -+ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { -+ oobsel = this->autooob; -+ autoplace = 1; -+ } -+ if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) -+ autoplace = 1; -+ -+ /* Setup start page */ -+ page = (int) (to >> this->page_shift); -+ /* Invalidate the page cache, if we write to the cached page */ -+ if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift)) -+ this->pagebuf = -1; -+ -+ startpage = page & this->pagemask; -+ -+ /* Loop until all kvec' data has been written */ -+ len = 0; -+ while (count) { -+ /* If the given tuple is >= pagesize then -+ * write it out from the iov -+ */ -+ if ((vecs->iov_len - len) >= mtd->oobblock) { -+ /* Calc number of pages we can write -+ * out of this iov in one go */ -+ numpages = (vecs->iov_len - len) >> this->page_shift; -+ /* Do not cross block boundaries */ -+ numpages = min (ppblock - (startpage & (ppblock - 1)), numpages); -+ oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages); -+ bufstart = (u_char *)vecs->iov_base; -+ bufstart += len; -+ this->data_poi = bufstart; -+ oob = 0; -+ for (i = 1; i <= numpages; i++) { -+ /* Write one page. If this is the last page to write -+ * then use the real pageprogram command, else select -+ * cached programming if supported by the chip. -+ */ -+ ret = nand_write_page (mtd, this, page & this->pagemask, -+ &oobbuf[oob], oobsel, i != numpages); -+ if (ret) -+ goto out; -+ this->data_poi += mtd->oobblock; -+ len += mtd->oobblock; -+ oob += mtd->oobsize; -+ page++; -+ } -+ /* Check, if we have to switch to the next tuple */ -+ if (len >= (int) vecs->iov_len) { -+ vecs++; -+ len = 0; -+ count--; -+ } -+ } else { -+ /* We must use the internal buffer, read data out of each -+ * tuple until we have a full page to write -+ */ -+ int cnt = 0; -+ while (cnt < mtd->oobblock) { -+ if (vecs->iov_base != NULL && vecs->iov_len) -+ this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++]; -+ /* Check, if we have to switch to the next tuple */ -+ if (len >= (int) vecs->iov_len) { -+ vecs++; -+ len = 0; -+ count--; -+ } -+ } -+ this->pagebuf = page; -+ this->data_poi = this->data_buf; -+ bufstart = this->data_poi; -+ numpages = 1; -+ oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages); -+ ret = nand_write_page (mtd, this, page & this->pagemask, -+ oobbuf, oobsel, 0); -+ if (ret) -+ goto out; -+ page++; -+ } -+ -+ this->data_poi = bufstart; -+ ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0); -+ if (ret) -+ goto out; -+ -+ written += mtd->oobblock * numpages; -+ /* All done ? */ -+ if (!count) -+ break; -+ -+ startpage = page & this->pagemask; -+ /* Check, if we cross a chip boundary */ -+ if (!startpage) { -+ chipnr++; -+ this->select_chip(mtd, -1); -+ this->select_chip(mtd, chipnr); -+ } -+ } -+ ret = 0; -+out: -+ /* Deselect and wake up anyone waiting on the device */ -+ nand_release_device(mtd); -+ -+ *retlen = written; -+ return ret; -+} -+#endif -+#endif -+ -+/** -+ * single_erease_cmd - [GENERIC] NAND standard block erase command function -+ * @mtd: MTD device structure -+ * @page: the page address of the block which will be erased -+ * -+ * Standard erase command for NAND chips -+ */ -+#if NAND_ERASE_SUPPORT -+static void single_erase_cmd (struct mtd_info *mtd, int page) -+{ -+ struct nand_chip *this = mtd->priv; -+ /* Send commands to erase a block */ -+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page); -+ this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1); -+} -+#endif -+ -+/** -+ * multi_erease_cmd - [GENERIC] AND specific block erase command function -+ * @mtd: MTD device structure -+ * @page: the page address of the block which will be erased -+ * -+ * AND multi block erase command function -+ * Erase 4 consecutive blocks -+ */ -+#if NAND_ERASE_SUPPORT -+static void multi_erase_cmd (struct mtd_info *mtd, int page) -+{ -+ struct nand_chip *this = mtd->priv; -+ /* Send commands to erase a block */ -+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); -+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); -+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); -+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page); -+ this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1); -+} -+#endif -+ -+/** -+ * nand_erase - [MTD Interface] erase block(s) -+ * @mtd: MTD device structure -+ * @instr: erase instruction -+ * -+ * Erase one ore more blocks -+ */ -+#if NAND_ERASE_SUPPORT -+static int nand_erase (struct mtd_info *mtd, struct erase_info *instr) -+{ -+ return nand_erase_nand (mtd, instr, 0); -+} -+#endif -+ -+#define BBT_PAGE_MASK 0xffffff3f -+/** -+ * nand_erase_intern - [NAND Interface] erase block(s) -+ * @mtd: MTD device structure -+ * @instr: erase instruction -+ * @allowbbt: allow erasing the bbt area -+ * -+ * Erase one ore more blocks -+ */ -+#if NAND_ERASE_SUPPORT -+int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt) -+{ -+ int page, len, status, pages_per_block, ret, chipnr; -+ struct nand_chip *this = mtd->priv; -+ int rewrite_bbt[NAND_MAX_CHIPS]={0}; /* flags to indicate the page, if bbt needs to be rewritten. */ -+ unsigned int bbt_masked_page; /* bbt mask to compare to page being erased. */ -+ /* It is used to see if the current page is in the same */ -+ /* 256 block group and the same bank as the bbt. */ -+ -+ DEBUG (MTD_DEBUG_LEVEL3, -+ "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len); -+ -+ /* Start address must align on block boundary */ -+ if (instr->addr & ((1 << this->phys_erase_shift) - 1)) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n"); -+ return -EINVAL; -+ } -+ -+ /* Length must align on block boundary */ -+ if (instr->len & ((1 << this->phys_erase_shift) - 1)) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n"); -+ return -EINVAL; -+ } -+ -+ /* Do not allow erase past end of device */ -+ if ((instr->len + instr->addr) > mtd->size) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n"); -+ return -EINVAL; -+ } -+ -+ instr->fail_addr = 0xffffffff; -+ -+ /* Grab the lock and see if the device is available */ -+ nand_get_device (this, mtd, FL_ERASING); -+ -+ /* Shift to get first page */ -+ page = (int) (instr->addr >> this->page_shift); -+ chipnr = (int) (instr->addr >> this->chip_shift); -+ -+ /* Calculate pages in each block */ -+ pages_per_block = 1 << (this->phys_erase_shift - this->page_shift); -+ -+ /* Select the NAND device */ -+ this->select_chip(mtd, chipnr); -+ -+ /* Check the WP bit */ -+ /* Check, if it is write protected */ -+ if (nand_check_wp(mtd)) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n"); -+ instr->state = MTD_ERASE_FAILED; -+ goto erase_exit; -+ } -+ -+ /* if BBT requires refresh, set the BBT page mask to see if the BBT should be rewritten */ -+ if (this->options & BBT_AUTO_REFRESH) { -+ bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; -+ } else { -+ bbt_masked_page = 0xffffffff; /* should not match anything */ -+ } -+ -+ /* Loop through the pages */ -+ len = instr->len; -+ -+ instr->state = MTD_ERASING; -+ -+ while (len) { -+ /* Check if we have a bad block, we do not erase bad blocks ! */ -+ if (nand_block_checkbad(mtd, ((loff_t) page) << this->page_shift, 0, allowbbt)) { -+ puts ("nand_erase: attempt to erase a bad block at page "); -+ putx (page); -+ putnl (); -+ instr->state = MTD_ERASE_FAILED; -+ goto erase_exit; -+ } -+ -+ /* Invalidate the page cache, if we erase the block which contains -+ the current cached page */ -+ if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block)) -+ this->pagebuf = -1; -+ -+ this->erase_cmd (mtd, page & this->pagemask); -+ -+ status = this->waitfunc (mtd, this, FL_ERASING); -+ -+ /* See if operation failed and additional status checks are available */ -+ if ((status & NAND_STATUS_FAIL) && (this->errstat)) { -+ status = this->errstat(mtd, this, FL_ERASING, status, page); -+ } -+ -+ /* See if block erase succeeded */ -+ if (status & NAND_STATUS_FAIL) { -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); -+ instr->state = MTD_ERASE_FAILED; -+ instr->fail_addr = (page << this->page_shift); -+ goto erase_exit; -+ } -+ -+ /* if BBT requires refresh, set the BBT rewrite flag to the page being erased */ -+ if (this->options & BBT_AUTO_REFRESH) { -+ if (((page & BBT_PAGE_MASK) == bbt_masked_page) && -+ (page != this->bbt_td->pages[chipnr])) { -+ rewrite_bbt[chipnr] = (page << this->page_shift); -+ } -+ } -+ -+ /* Increment page address and decrement length */ -+ len -= (1 << this->phys_erase_shift); -+ page += pages_per_block; -+ -+ /* Check, if we cross a chip boundary */ -+ if (len && !(page & this->pagemask)) { -+ chipnr++; -+ this->select_chip(mtd, -1); -+ this->select_chip(mtd, chipnr); -+ -+ /* if BBT requires refresh and BBT-PERCHIP, -+ * set the BBT page mask to see if this BBT should be rewritten */ -+ if ((this->options & BBT_AUTO_REFRESH) && (this->bbt_td->options & NAND_BBT_PERCHIP)) { -+ bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; -+ } -+ -+ } -+ } -+ instr->state = MTD_ERASE_DONE; -+ -+erase_exit: -+ -+ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; -+#if 0 -+ /* Do call back function */ -+ if (!ret) -+ mtd_erase_callback(instr); -+#endif -+ -+ /* Deselect and wake up anyone waiting on the device */ -+ nand_release_device(mtd); -+ -+#if NAND_BBT_SUPPORT -+ /* if BBT requires refresh and erase was successful, rewrite any selected bad block tables */ -+ if ((this->options & BBT_AUTO_REFRESH) && (!ret)) { -+ for (chipnr = 0; chipnr < this->numchips; chipnr++) { -+ if (rewrite_bbt[chipnr]) { -+ /* update the BBT for chip */ -+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt (%d:0x%0x 0x%0x)\n", -+ chipnr, rewrite_bbt[chipnr], this->bbt_td->pages[chipnr]); -+ nand_update_bbt (mtd, rewrite_bbt[chipnr]); -+ } -+ } -+ } -+#endif -+ -+ /* Return more or less happy */ -+ return ret; -+} -+#endif -+ -+/** -+ * nand_sync - [MTD Interface] sync -+ * @mtd: MTD device structure -+ * -+ * Sync is actually a wait for chip ready function -+ */ -+#if 0 /* not needed */ -+static void nand_sync (struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n"); -+ -+ /* Grab the lock and see if the device is available */ -+ nand_get_device (this, mtd, FL_SYNCING); -+ /* Release it and go back */ -+ nand_release_device (mtd); -+} -+#endif -+ -+ -+/** -+ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad -+ * @mtd: MTD device structure -+ * @ofs: offset relative to mtd start -+ */ -+static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs) -+{ -+ /* Check for invalid offset */ -+ if (ofs > mtd->size) -+ return -EINVAL; -+ -+ return nand_block_checkbad (mtd, ofs, 1, 0); -+} -+ -+/** -+ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad -+ * @mtd: MTD device structure -+ * @ofs: offset relative to mtd start -+ */ -+#if NAND_WRITE_SUPPORT -+static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs) -+{ -+ struct nand_chip *this = mtd->priv; -+ int ret; -+ -+ if ((ret = nand_block_isbad(mtd, ofs))) { -+ /* If it was bad already, return success and do nothing. */ -+ if (ret > 0) -+ return 0; -+ return ret; -+ } -+ -+ return this->block_markbad(mtd, ofs); -+} -+#endif -+ -+/** -+ * nand_suspend - [MTD Interface] Suspend the NAND flash -+ * @mtd: MTD device structure -+ */ -+#if 0 /* don't need it */ -+static int nand_suspend(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ return nand_get_device (this, mtd, FL_PM_SUSPENDED); -+} -+#endif -+ -+/** -+ * nand_resume - [MTD Interface] Resume the NAND flash -+ * @mtd: MTD device structure -+ */ -+#if 0 /* don't need it */ -+static void nand_resume(struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ if (this->state == FL_PM_SUSPENDED) -+ nand_release_device(mtd); -+ else -+ puts("resume() called for the chip which is not in suspended state\n"); -+ -+} -+#endif -+ -+ -+/** -+ * nand_scan - [NAND Interface] Scan for the NAND device -+ * @mtd: MTD device structure -+ * @maxchips: Number of chips to scan for -+ * -+ * This fills out all the not initialized function pointers -+ * with the defaults. -+ * The flash ID is read and the mtd/chip structures are -+ * filled with the appropriate values. Buffers are allocated if -+ * they are not provided by the board driver -+ * -+ */ -+int nand_scan (struct mtd_info *mtd, int maxchips) -+{ -+ int i, nand_maf_id, nand_dev_id, busw, maf_id; -+ struct nand_chip *this = mtd->priv; -+ -+ /* Get buswidth to select the correct functions*/ -+ busw = this->options & NAND_BUSWIDTH_16; -+ -+ /* check for proper chip_delay setup, set 20us if not */ -+ if (!this->chip_delay) -+ this->chip_delay = 20; -+ -+ /* check, if a user supplied command function given */ -+ if (this->cmdfunc == NULL) -+ this->cmdfunc = nand_command; -+ -+ /* check, if a user supplied wait function given */ -+ if (this->waitfunc == NULL) -+ this->waitfunc = nand_wait; -+ -+ if (!this->select_chip) -+ this->select_chip = nand_select_chip; -+ if (!this->write_byte) -+ this->write_byte = busw ? nand_write_byte16 : nand_write_byte; -+ if (!this->read_byte) -+ this->read_byte = busw ? nand_read_byte16 : nand_read_byte; -+ if (!this->write_word) -+ this->write_word = nand_write_word; -+ if (!this->read_word) -+ this->read_word = nand_read_word; -+ if (!this->block_bad) -+ this->block_bad = nand_block_bad; -+#if NAND_WRITE_SUPPORT -+ if (!this->block_markbad) -+ this->block_markbad = nand_default_block_markbad; -+#endif -+ if (!this->write_buf) -+ this->write_buf = busw ? nand_write_buf16 : nand_write_buf; -+ if (!this->read_buf) -+ this->read_buf = busw ? nand_read_buf16 : nand_read_buf; -+ if (!this->verify_buf) -+ this->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; -+#if NAND_BBT_SUPPORT -+ if (!this->scan_bbt) -+ this->scan_bbt = nand_default_bbt; -+#endif -+ -+ /* Select the device */ -+ this->select_chip(mtd, 0); -+ -+ /* Send the command for reading device ID */ -+ this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1); -+ -+ /* Read manufacturer and device IDs */ -+ nand_maf_id = this->read_byte(mtd); -+ nand_dev_id = this->read_byte(mtd); -+ -+ /* Print and store flash device information */ -+ for (i = 0; nand_flash_ids[i].name != NULL; i++) { -+ -+ if (nand_dev_id != nand_flash_ids[i].id) -+ continue; -+ -+ if (!mtd->name) mtd->name = nand_flash_ids[i].name; -+ this->chipsize = nand_flash_ids[i].chipsize << 20; -+ -+ /* New devices have all the information in additional id bytes */ -+ if (!nand_flash_ids[i].pagesize) { -+ int extid; -+ /* The 3rd id byte contains non relevant data ATM */ -+ extid = this->read_byte(mtd); -+ /* The 4th id byte is the important one */ -+ extid = this->read_byte(mtd); -+ /* Calc pagesize */ -+ mtd->oobblock = 1024 << (extid & 0x3); -+ extid >>= 2; -+ /* Calc oobsize */ -+ mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock >> 9); -+ extid >>= 2; -+ /* Calc blocksize. Blocksize is multiples of 64KiB */ -+ mtd->erasesize = (64 * 1024) << (extid & 0x03); -+ extid >>= 2; -+ /* Get buswidth information */ -+ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; -+ -+ } else { -+ /* Old devices have this data hardcoded in the -+ * device id table */ -+ mtd->erasesize = nand_flash_ids[i].erasesize; -+ mtd->oobblock = nand_flash_ids[i].pagesize; -+ mtd->oobsize = mtd->oobblock / 32; -+ busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16; -+ } -+ -+ /* Try to identify manufacturer */ -+ for (maf_id = 0; nand_manuf_ids[maf_id].id != 0x0; maf_id++) { -+ if (nand_manuf_ids[maf_id].id == nand_maf_id) -+ break; -+ } -+ -+ /* Check, if buswidth is correct. Hardware drivers should set -+ * this correct ! */ -+ if (busw != (this->options & NAND_BUSWIDTH_16)) { -+#if 0 -+ puts ("Manufacturer ID: "); -+ putx (nand_maf_id); -+ puts (", Chip ID: "); -+ putx (nand_dev_id); -+ puts (" ("); -+ puts (nand_manuf_ids[maf_id].name); -+ putc (' '); -+ puts (mtd->name); -+ puts (")\r\n"); -+#endif -+ puts ("Expected NAND bus width "); -+ putx ((this->options & NAND_BUSWIDTH_16) ? 16 : 8); -+ puts (",found "); -+ putx (busw ? 16 : 8); -+ putnl(); -+ this->select_chip(mtd, -1); -+ return 1; -+ } -+ -+ /* Calculate the address shift from the page size */ -+ this->page_shift = ffs(mtd->oobblock) - 1; -+ this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1; -+ this->chip_shift = ffs(this->chipsize) - 1; -+ -+ /* Set the bad block position */ -+ this->badblockpos = mtd->oobblock > 512 ? -+ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS; -+ -+ /* Get chip options, preserve non chip based options */ -+ this->options &= ~NAND_CHIPOPTIONS_MSK; -+ this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK; -+ /* Set this as a default. Board drivers can override it, if neccecary */ -+ this->options |= NAND_NO_AUTOINCR; -+ /* Check if this is a not a samsung device. Do not clear the options -+ * for chips which are not having an extended id. -+ */ -+ if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize) -+ this->options &= ~NAND_SAMSUNG_LP_OPTIONS; -+ -+#if NAND_ERASE_SUPPORT -+ /* Check for AND chips with 4 page planes */ -+ if (this->options & NAND_4PAGE_ARRAY) -+ this->erase_cmd = multi_erase_cmd; -+ else -+ this->erase_cmd = single_erase_cmd; -+#endif -+ -+ /* Do not replace user supplied command function ! */ -+ if (mtd->oobblock > 512 && this->cmdfunc == nand_command) -+ this->cmdfunc = nand_command_lp; -+ -+ puts ("Manufacturer ID / Chip ID: "); -+ putx (nand_maf_id << 8 | nand_dev_id); -+ puts (" ("); -+ puts (nand_manuf_ids[maf_id].name); -+ putc (' '); -+ puts (nand_flash_ids[i].name); -+ puts (")\r\n"); -+ break; -+ } -+ -+ if (!nand_flash_ids[i].name) { -+ puts ("No NAND device found!!!\r\n"); -+ this->select_chip(mtd, -1); -+ return 1; -+ } -+ -+#if NAND_MULTICHIP_SUPPORT -+ for (i=1; i < maxchips; i++) { -+ this->select_chip(mtd, i); -+ -+ /* Send the command for reading device ID */ -+ this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1); -+ -+ /* Read manufacturer and device IDs */ -+ if (nand_maf_id != this->read_byte(mtd) || -+ nand_dev_id != this->read_byte(mtd)) -+ break; -+ } -+ if (i > 1) { -+ putx (i); -+ puts (" NAND chips detected\r\n"); -+ } -+#endif -+ -+ /* Allocate buffers, if neccecary */ -+ if (!this->oob_buf) { -+ size_t len; -+ len = mtd->oobsize << (this->phys_erase_shift - this->page_shift); -+ this->oob_buf = malloc (len); -+ if (!this->oob_buf) { -+ puts ("nand_scan(): Cannot allocate oob_buf\r\n"); -+ return -ENOMEM; -+ } -+ this->options |= NAND_OOBBUF_ALLOC; -+ } -+ -+ if (!this->data_buf) { -+ size_t len; -+ len = mtd->oobblock + mtd->oobsize; -+ this->data_buf = malloc (len); -+ if (!this->data_buf) { -+ if (this->options & NAND_OOBBUF_ALLOC) -+ free (this->oob_buf); -+ puts ("nand_scan(): Cannot allocate data_buf\r\n"); -+ return -ENOMEM; -+ } -+ this->options |= NAND_DATABUF_ALLOC; -+ } -+ -+#if NAND_MULTICHIP_SUPP0RT -+ /* Store the number of chips and calc total size for mtd */ -+ this->numchips = i; -+ mtd->size = i * this->chipsize; -+#else -+ /* Store the number of chips and calc total size for mtd */ -+ this->numchips = 1; -+ mtd->size = this->chipsize; -+#endif -+ -+ /* Convert chipsize to number of pages per chip -1. */ -+ this->pagemask = (this->chipsize >> this->page_shift) - 1; -+ /* Preset the internal oob buffer */ -+ memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift)); -+ -+ /* If no default placement scheme is given, select an -+ * appropriate one */ -+ if (!this->autooob) { -+ /* Select the appropriate default oob placement scheme for -+ * placement agnostic filesystems */ -+ switch (mtd->oobsize) { -+ case 8: -+ this->autooob = &nand_oob_8; -+ break; -+ case 16: -+ this->autooob = &nand_oob_16; -+ break; -+ case 64: -+ this->autooob = &nand_oob_64; -+ break; -+ default: -+ puts ("No oob scheme defined for oobsize "); -+ putx (mtd->oobsize); -+ putnl (); -+ BUG(); -+ } -+ } -+ -+ /* The number of bytes available for the filesystem to place fs dependend -+ * oob data */ -+ mtd->oobavail = 0; -+ for (i = 0; this->autooob->oobfree[i][1]; i++) -+ mtd->oobavail += this->autooob->oobfree[i][1]; -+ -+ /* -+ * check ECC mode, default to software -+ * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize -+ * fallback to software ECC -+ */ -+ this->eccsize = 256; /* set default eccsize */ -+ this->eccbytes = 3; -+ -+ switch (this->eccmode) { -+#if NAND_HWECC_SUPPORT -+ case NAND_ECC_HW12_2048: -+ if (mtd->oobblock < 2048) { -+ puts ("2048 byte HW ECC not possible on "); -+ putx (mtd->oobblock); -+ puts (" byte page size, fallback to SW ECC\r\n"); -+ this->eccmode = NAND_ECC_SOFT; -+ this->calculate_ecc = nand_calculate_ecc; -+ this->correct_data = nand_correct_data; -+ } else -+ this->eccsize = 2048; -+ break; -+ -+ case NAND_ECC_HW3_512: -+ case NAND_ECC_HW6_512: -+ case NAND_ECC_HW8_512: -+ if (mtd->oobblock == 256) { -+ puts ("512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC\r\n"); -+ this->eccmode = NAND_ECC_SOFT; -+ this->calculate_ecc = nand_calculate_ecc; -+ this->correct_data = nand_correct_data; -+ } else -+ this->eccsize = 512; /* set eccsize to 512 */ -+ break; -+ -+ case NAND_ECC_HW3_256: -+ break; -+#endif -+ -+ case NAND_ECC_NONE: -+ puts ("NAND_ECC_NONE selected by board driver. This is not recommended !!\r\n"); -+ this->eccmode = NAND_ECC_NONE; -+ break; -+ -+ case NAND_ECC_SOFT: -+ this->calculate_ecc = nand_calculate_ecc; -+ this->correct_data = nand_correct_data; -+ break; -+ -+ default: -+ puts ("Invalid NAND_ECC_MODE "); -+ putx (this->eccmode); -+ putnl (); -+ BUG(); -+ } -+ -+ /* Check hardware ecc function availability and adjust number of ecc bytes per -+ * calculation step -+ */ -+ switch (this->eccmode) { -+ case NAND_ECC_HW12_2048: -+ this->eccbytes += 4; -+ case NAND_ECC_HW8_512: -+ this->eccbytes += 2; -+ case NAND_ECC_HW6_512: -+ this->eccbytes += 3; -+ case NAND_ECC_HW3_512: -+ case NAND_ECC_HW3_256: -+ if (this->calculate_ecc && this->correct_data && this->enable_hwecc) -+ break; -+ puts ("No ECC functions supplied, Hardware ECC not possible\r\n"); -+ BUG(); -+ } -+ -+ mtd->eccsize = this->eccsize; -+ -+ /* Set the number of read / write steps for one page to ensure ECC generation */ -+ switch (this->eccmode) { -+ case NAND_ECC_HW12_2048: -+ this->eccsteps = mtd->oobblock / 2048; -+ break; -+ case NAND_ECC_HW3_512: -+ case NAND_ECC_HW6_512: -+ case NAND_ECC_HW8_512: -+ this->eccsteps = mtd->oobblock / 512; -+ break; -+ case NAND_ECC_HW3_256: -+ case NAND_ECC_SOFT: -+ this->eccsteps = mtd->oobblock / 256; -+ break; -+ -+ case NAND_ECC_NONE: -+ this->eccsteps = 1; -+ break; -+ } -+ -+ /* Initialize state, waitqueue and spinlock */ -+ this->state = FL_READY; -+#if 0 -+ init_waitqueue_head (&this->wq); -+ spin_lock_init (&this->chip_lock); -+#endif -+ -+ /* De-select the device */ -+ this->select_chip(mtd, -1); -+ -+ /* Invalidate the pagebuffer reference */ -+ this->pagebuf = -1; -+ -+ /* Fill in remaining MTD driver data */ -+ mtd->type = MTD_NANDFLASH; -+ mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC; -+ mtd->ecctype = MTD_ECC_SW; -+#if NAND_ERASE_SUPPORT -+ mtd->erase = nand_erase; -+#endif -+#if 0 /* not needed */ -+ mtd->point = NULL; -+ mtd->unpoint = NULL; -+#endif -+ mtd->read = nand_read; -+#if NAND_WRITE_SUPPORT -+ mtd->write = nand_write; -+#endif -+ mtd->read_ecc = nand_read_ecc; -+#if NAND_WRITE_SUPPORT -+ mtd->write_ecc = nand_write_ecc; -+#endif -+ mtd->read_oob = nand_read_oob; -+#if NAND_WRITE_SUPPORT -+ mtd->write_oob = nand_write_oob; -+#endif -+#if NAND_KVEC_SUPPORT -+ mtd->readv = NULL; -+#endif -+#if NAND_WRITE_SUPPORT && NAND_KVEC_SUPPORT -+ mtd->writev = nand_writev; -+ mtd->writev_ecc = nand_writev_ecc; -+#endif -+#if 0 /* not needed */ -+ mtd->sync = nand_sync; -+ mtd->lock = NULL; -+ mtd->unlock = NULL; -+ mtd->suspend = nand_suspend; -+ mtd->resume = nand_resume; -+#endif -+ mtd->block_isbad = nand_block_isbad; -+#if NAND_WRITE_SUPPORT -+ mtd->block_markbad = nand_block_markbad; -+#endif -+ -+ /* and make the autooob the default one */ -+ memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); -+ -+#ifdef THIS_MODULE /* normally isn't for us */ -+ mtd->owner = THIS_MODULE; -+#endif -+ -+ /* Check, if we should skip the bad block table scan */ -+ if (this->options & NAND_SKIP_BBTSCAN) -+ return 0; -+ -+#if NAND_BBT_SUPPORT -+ /* Build bad block table */ -+ return this->scan_bbt (mtd); -+#else -+ return -1; -+#endif -+} -+ -+/** -+ * nand_release - [NAND Interface] Free resources held by the NAND device -+ * @mtd: MTD device structure -+*/ -+#if 0 /* don't need it */ -+void nand_release (struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+#if 0 -+#ifdef CONFIG_MTD_PARTITIONS -+ /* Deregister partitions */ -+ del_mtd_partitions (mtd); -+#endif -+ /* Deregister the device */ -+ del_mtd_device (mtd); -+#endif -+ -+ /* Free bad block table memory */ -+ free (this->bbt); -+ /* Buffer allocated by nand_scan ? */ -+ if (this->options & NAND_OOBBUF_ALLOC) -+ free (this->oob_buf); -+ /* Buffer allocated by nand_scan ? */ -+ if (this->options & NAND_DATABUF_ALLOC) -+ free (this->data_buf); -+} -+#endif -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_bbt.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_bbt.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_bbt.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_bbt.c 2006-11-10 09:55:58.000000000 +0100 -@@ -0,0 +1,1151 @@ -+/* -+ * drivers/mtd/nand_bbt.c -+ * -+ * Overview: -+ * Bad block table support for the NAND driver -+ * -+ * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) -+ * -+ * $Id: nand_bbt.c,v 1.5 2006/11/10 08:55:58 ricardw Exp $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Description: -+ * -+ * When nand_scan_bbt is called, then it tries to find the bad block table -+ * depending on the options in the bbt descriptor(s). If a bbt is found -+ * then the contents are read and the memory based bbt is created. If a -+ * mirrored bbt is selected then the mirror is searched too and the -+ * versions are compared. If the mirror has a greater version number -+ * than the mirror bbt is used to build the memory based bbt. -+ * If the tables are not versioned, then we "or" the bad block information. -+ * If one of the bbt's is out of date or does not exist it is (re)created. -+ * If no bbt exists at all then the device is scanned for factory marked -+ * good / bad blocks and the bad block tables are created. -+ * -+ * For manufacturer created bbts like the one found on M-SYS DOC devices -+ * the bbt is searched and read but never created -+ * -+ * The autogenerated bad block table is located in the last good blocks -+ * of the device. The table is mirrored, so it can be updated eventually. -+ * The table is marked in the oob area with an ident pattern and a version -+ * number which indicates which of both tables is more up to date. -+ * -+ * The table uses 2 bits per block -+ * 11b: block is good -+ * 00b: block is factory marked bad -+ * 01b, 10b: block is marked bad due to wear -+ * -+ * The memory bad block table uses the following scheme: -+ * 00b: block is good -+ * 01b: block is marked bad due to wear -+ * 10b: block is reserved (to protect the bbt area) -+ * 11b: block is factory marked bad -+ * -+ * Multichip devices like DOC store the bad block info per floor. -+ * -+ * Following assumptions are made: -+ * - bbts start at a page boundary, if autolocated on a block boundary -+ * - the space neccecary for a bbt in FLASH does not exceed a block boundary -+ * -+ */ -+ -+#if 0 -+#include -+#endif -+ -+#include -+#include "mtd.h" -+#include "nand.h" -+#include "nand_ecc.h" -+ -+#if 0 -+#include -+#include -+#endif -+ -+#include -+ -+#include "lib.h" -+ -+ -+/** -+ * check_pattern - [GENERIC] check if a pattern is in the buffer -+ * @buf: the buffer to search -+ * @len: the length of buffer to search -+ * @paglen: the pagelength -+ * @td: search pattern descriptor -+ * -+ * Check for a pattern at the given place. Used to search bad block -+ * tables and good / bad block identifiers. -+ * If the SCAN_EMPTY option is set then check, if all bytes except the -+ * pattern area contain 0xff -+ * -+*/ -+static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) -+{ -+ int i, end = 0; -+ uint8_t *p = buf; -+ -+ end = paglen + td->offs; -+ if (td->options & NAND_BBT_SCANEMPTY) { -+ for (i = 0; i < end; i++) { -+ if (p[i] != 0xff) -+ return -1; -+ } -+ } -+ p += end; -+ -+ /* Compare the pattern */ -+ for (i = 0; i < td->len; i++) { -+ if (p[i] != td->pattern[i]) -+ return -1; -+ } -+ -+ if (td->options & NAND_BBT_SCANEMPTY) { -+ p += td->len; -+ end += td->len; -+ for (i = end; i < len; i++) { -+ if (*p++ != 0xff) -+ return -1; -+ } -+ } -+ return 0; -+} -+ -+/** -+ * check_short_pattern - [GENERIC] check if a pattern is in the buffer -+ * @buf: the buffer to search -+ * @td: search pattern descriptor -+ * -+ * Check for a pattern at the given place. Used to search bad block -+ * tables and good / bad block identifiers. Same as check_pattern, but -+ * no optional empty check -+ * -+*/ -+static int check_short_pattern (uint8_t *buf, struct nand_bbt_descr *td) -+{ -+ int i; -+ uint8_t *p = buf; -+ -+ /* Compare the pattern */ -+ for (i = 0; i < td->len; i++) { -+ if (p[td->offs + i] != td->pattern[i]) -+ return -1; -+ } -+ return 0; -+} -+ -+/** -+ * read_bbt - [GENERIC] Read the bad block table starting from page -+ * @mtd: MTD device structure -+ * @buf: temporary buffer -+ * @page: the starting page -+ * @num: the number of bbt descriptors to read -+ * @bits: number of bits per block -+ * @offs: offset in the memory table -+ * @reserved_block_code: Pattern to identify reserved blocks -+ * -+ * Read the bad block table starting from page. -+ * -+ */ -+static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num, -+ int bits, int offs, int reserved_block_code) -+{ -+ int res, i, j, act = 0; -+ struct nand_chip *this = mtd->priv; -+ size_t retlen, len, totlen; -+ loff_t from; -+ uint8_t msk = (uint8_t) ((1 << bits) - 1); -+ -+ totlen = (num * bits) >> 3; -+ from = ((loff_t)page) << this->page_shift; -+ -+ while (totlen) { -+ len = min (totlen, (size_t) (1 << this->bbt_erase_shift)); -+ res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob); -+ if (res < 0) { -+ if (retlen != len) { -+ puts ("nand_bbt: Error reading bad block table\n"); -+ return res; -+ } -+ puts ("nand_bbt: ECC error while reading bad block table\n"); -+ } -+ -+ /* Analyse data */ -+ for (i = 0; i < len; i++) { -+ uint8_t dat = buf[i]; -+ for (j = 0; j < 8; j += bits, act += 2) { -+ uint8_t tmp = (dat >> j) & msk; -+ if (tmp == msk) -+ continue; -+ if (reserved_block_code && -+ (tmp == reserved_block_code)) { -+ puts ("nand_read_bbt: Reserved block at"); -+ putx (((offs << 2) + (act >> 1)) << this->bbt_erase_shift); -+ putnl (); -+ this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06); -+ continue; -+ } -+ /* Leave it for now, if its matured we can move this -+ * message to MTD_DEBUG_LEVEL0 */ -+ puts ("nand_read_bbt: Bad block at "); -+ putx (((offs << 2) + (act >> 1)) << this->bbt_erase_shift); -+ putnl (); -+ /* Factory marked bad or worn out ? */ -+ if (tmp == 0) -+ this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06); -+ else -+ this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06); -+ } -+ } -+ totlen -= len; -+ from += len; -+ } -+ return 0; -+} -+ -+/** -+ * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page -+ * @mtd: MTD device structure -+ * @buf: temporary buffer -+ * @td: descriptor for the bad block table -+ * @chip: read the table for a specific chip, -1 read all chips. -+ * Applies only if NAND_BBT_PERCHIP option is set -+ * -+ * Read the bad block table for all chips starting at a given page -+ * We assume that the bbt bits are in consecutive order. -+*/ -+static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip) -+{ -+ struct nand_chip *this = mtd->priv; -+ int res = 0, i; -+ int bits; -+ -+ bits = td->options & NAND_BBT_NRBITS_MSK; -+ if (td->options & NAND_BBT_PERCHIP) { -+ int offs = 0; -+ for (i = 0; i < this->numchips; i++) { -+ if (chip == -1 || chip == i) -+ res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code); -+ if (res) -+ return res; -+ offs += this->chipsize >> (this->bbt_erase_shift + 2); -+ } -+ } else { -+ res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code); -+ if (res) -+ return res; -+ } -+ return 0; -+} -+ -+/** -+ * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page -+ * @mtd: MTD device structure -+ * @buf: temporary buffer -+ * @td: descriptor for the bad block table -+ * @md: descriptor for the bad block table mirror -+ * -+ * Read the bad block table(s) for all chips starting at a given page -+ * We assume that the bbt bits are in consecutive order. -+ * -+*/ -+static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, -+ struct nand_bbt_descr *md) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ /* Read the primary version, if available */ -+ if (td->options & NAND_BBT_VERSION) { -+ nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); -+ td->version[0] = buf[mtd->oobblock + td->veroffs]; -+ puts ("Bad block table at page "); -+ putx (td->pages[0]); -+ puts (", version "); -+ putx (td->version[0]); -+ putnl (); -+ } -+ -+ /* Read the mirror version, if available */ -+ if (md && (md->options & NAND_BBT_VERSION)) { -+ nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); -+ md->version[0] = buf[mtd->oobblock + md->veroffs]; -+ puts ("Bad block table at page "); -+ putx (md->pages[0]); -+ puts (", version "); -+ putx (md->version[0]); -+ putnl (); -+ } -+ -+ return 1; -+} -+ -+/** -+ * create_bbt - [GENERIC] Create a bad block table by scanning the device -+ * @mtd: MTD device structure -+ * @buf: temporary buffer -+ * @bd: descriptor for the good/bad block search pattern -+ * @chip: create the table for a specific chip, -1 read all chips. -+ * Applies only if NAND_BBT_PERCHIP option is set -+ * -+ * Create a bad block table by scanning the device -+ * for the given good/bad block identify pattern -+ */ -+static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) -+{ -+ struct nand_chip *this = mtd->priv; -+ int i, j, numblocks, len, scanlen; -+ int startblock; -+ loff_t from; -+ size_t readlen, ooblen; -+ -+ puts ("Scanning device for bad blocks\n"); -+ -+ if (bd->options & NAND_BBT_SCANALLPAGES) -+ len = 1 << (this->bbt_erase_shift - this->page_shift); -+ else { -+ if (bd->options & NAND_BBT_SCAN2NDPAGE) -+ len = 2; -+ else -+ len = 1; -+ } -+ -+ if (!(bd->options & NAND_BBT_SCANEMPTY)) { -+ /* We need only read few bytes from the OOB area */ -+ scanlen = ooblen = 0; -+ readlen = bd->len; -+ } else { -+ /* Full page content should be read */ -+ scanlen = mtd->oobblock + mtd->oobsize; -+ readlen = len * mtd->oobblock; -+ ooblen = len * mtd->oobsize; -+ } -+ -+ if (chip == -1) { -+ /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it -+ * makes shifting and masking less painful */ -+ numblocks = mtd->size >> (this->bbt_erase_shift - 1); -+ startblock = 0; -+ from = 0; -+ } else { -+ if (chip >= this->numchips) { -+ puts ("create_bbt(): chipnr ("); -+ putx (chip + 1); -+ puts (" > available chips "); -+ putx (this->numchips); -+ putnl (); -+ return -EINVAL; -+ } -+ numblocks = this->chipsize >> (this->bbt_erase_shift - 1); -+ startblock = chip * numblocks; -+ numblocks += startblock; -+ from = startblock << (this->bbt_erase_shift - 1); -+ } -+ -+ for (i = startblock; i < numblocks;) { -+ int ret; -+ -+ if (bd->options & NAND_BBT_SCANEMPTY) -+ if ((ret = nand_read_raw (mtd, buf, from, readlen, ooblen))) -+ return ret; -+ -+ for (j = 0; j < len; j++) { -+ if (!(bd->options & NAND_BBT_SCANEMPTY)) { -+ size_t retlen; -+ -+ /* Read the full oob until read_oob is fixed to -+ * handle single byte reads for 16 bit buswidth */ -+ ret = mtd->read_oob(mtd, from + j * mtd->oobblock, -+ mtd->oobsize, &retlen, buf); -+ if (ret) -+ return ret; -+ -+ if (check_short_pattern (buf, bd)) { -+ this->bbt[i >> 3] |= 0x03 << (i & 0x6); -+ puts ("Bad eraseblock "); -+ putx (i >> 1); -+ puts (" at "); -+ putx ((unsigned int) from); -+ putnl (); -+ break; -+ } -+ } else { -+ if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { -+ this->bbt[i >> 3] |= 0x03 << (i & 0x6); -+ puts ("Bad eraseblock "); -+ putx (i >> 1); -+ puts (" at "); -+ putx ((unsigned int) from); -+ putnl (); -+ break; -+ } -+ } -+ } -+ i += 2; -+ from += (1 << this->bbt_erase_shift); -+ } -+ return 0; -+} -+ -+/** -+ * search_bbt - [GENERIC] scan the device for a specific bad block table -+ * @mtd: MTD device structure -+ * @buf: temporary buffer -+ * @td: descriptor for the bad block table -+ * -+ * Read the bad block table by searching for a given ident pattern. -+ * Search is preformed either from the beginning up or from the end of -+ * the device downwards. The search starts always at the start of a -+ * block. -+ * If the option NAND_BBT_PERCHIP is given, each chip is searched -+ * for a bbt, which contains the bad block information of this chip. -+ * This is neccecary to provide support for certain DOC devices. -+ * -+ * The bbt ident pattern resides in the oob area of the first page -+ * in a block. -+ */ -+static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td) -+{ -+ struct nand_chip *this = mtd->priv; -+ int i, chips; -+ int bits, startblock, block, dir; -+ int scanlen = mtd->oobblock + mtd->oobsize; -+ int bbtblocks; -+ -+ /* Search direction top -> down ? */ -+ if (td->options & NAND_BBT_LASTBLOCK) { -+ startblock = (mtd->size >> this->bbt_erase_shift) -1; -+ dir = -1; -+ } else { -+ startblock = 0; -+ dir = 1; -+ } -+ -+ /* Do we have a bbt per chip ? */ -+ if (td->options & NAND_BBT_PERCHIP) { -+ chips = this->numchips; -+ bbtblocks = this->chipsize >> this->bbt_erase_shift; -+ startblock &= bbtblocks - 1; -+ } else { -+ chips = 1; -+ bbtblocks = mtd->size >> this->bbt_erase_shift; -+ } -+ -+ /* Number of bits for each erase block in the bbt */ -+ bits = td->options & NAND_BBT_NRBITS_MSK; -+ -+ for (i = 0; i < chips; i++) { -+ /* Reset version information */ -+ td->version[i] = 0; -+ td->pages[i] = -1; -+ /* Scan the maximum number of blocks */ -+ for (block = 0; block < td->maxblocks; block++) { -+ int actblock = startblock + dir * block; -+ /* Read first page */ -+ nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize); -+ if (!check_pattern(buf, scanlen, mtd->oobblock, td)) { -+ td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift); -+ if (td->options & NAND_BBT_VERSION) { -+ td->version[i] = buf[mtd->oobblock + td->veroffs]; -+ } -+ break; -+ } -+ } -+ startblock += this->chipsize >> this->bbt_erase_shift; -+ } -+ /* Check, if we found a bbt for each requested chip */ -+ for (i = 0; i < chips; i++) { -+ if (td->pages[i] == -1) { -+ puts ("Bad block table not found for chip "); -+ putx (i); -+ putnl (); -+ } else { -+ puts ("Bad block table found at page "); -+ putx (td->pages[i]); -+ puts (" version "); -+ putx (td->version[i]); -+ putnl (); -+ } -+ } -+ return 0; -+} -+ -+/** -+ * search_read_bbts - [GENERIC] scan the device for bad block table(s) -+ * @mtd: MTD device structure -+ * @buf: temporary buffer -+ * @td: descriptor for the bad block table -+ * @md: descriptor for the bad block table mirror -+ * -+ * Search and read the bad block table(s) -+*/ -+static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf, -+ struct nand_bbt_descr *td, struct nand_bbt_descr *md) -+{ -+ /* Search the primary table */ -+ search_bbt (mtd, buf, td); -+ -+ /* Search the mirror table */ -+ if (md) -+ search_bbt (mtd, buf, md); -+ -+ /* Force result check */ -+ return 1; -+} -+ -+ -+/** -+ * write_bbt - [GENERIC] (Re)write the bad block table -+ * -+ * @mtd: MTD device structure -+ * @buf: temporary buffer -+ * @td: descriptor for the bad block table -+ * @md: descriptor for the bad block table mirror -+ * @chipsel: selector for a specific chip, -1 for all -+ * -+ * (Re)write the bad block table -+ * -+*/ -+static int write_bbt (struct mtd_info *mtd, uint8_t *buf, -+ struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel) -+{ -+ struct nand_chip *this = mtd->priv; -+ struct nand_oobinfo oobinfo; -+ struct erase_info einfo; -+ int i, j, res, chip = 0; -+ int bits, startblock, dir, page, offs, numblocks, sft, sftmsk; -+ int nrchips, bbtoffs, pageoffs; -+ uint8_t msk[4]; -+ uint8_t rcode = td->reserved_block_code; -+ size_t retlen, len = 0; -+ loff_t to; -+ -+ if (!rcode) -+ rcode = 0xff; -+ /* Write bad block table per chip rather than per device ? */ -+ if (td->options & NAND_BBT_PERCHIP) { -+ numblocks = (int) (this->chipsize >> this->bbt_erase_shift); -+ /* Full device write or specific chip ? */ -+ if (chipsel == -1) { -+ nrchips = this->numchips; -+ } else { -+ nrchips = chipsel + 1; -+ chip = chipsel; -+ } -+ } else { -+ numblocks = (int) (mtd->size >> this->bbt_erase_shift); -+ nrchips = 1; -+ } -+ -+ /* Loop through the chips */ -+ for (; chip < nrchips; chip++) { -+ -+ /* There was already a version of the table, reuse the page -+ * This applies for absolute placement too, as we have the -+ * page nr. in td->pages. -+ */ -+ if (td->pages[chip] != -1) { -+ page = td->pages[chip]; -+ goto write; -+ } -+ -+ /* Automatic placement of the bad block table */ -+ /* Search direction top -> down ? */ -+ if (td->options & NAND_BBT_LASTBLOCK) { -+ startblock = numblocks * (chip + 1) - 1; -+ dir = -1; -+ } else { -+ startblock = chip * numblocks; -+ dir = 1; -+ } -+ -+ for (i = 0; i < td->maxblocks; i++) { -+ int block = startblock + dir * i; -+ /* Check, if the block is bad */ -+ switch ((this->bbt[block >> 2] >> (2 * (block & 0x03))) & 0x03) { -+ case 0x01: -+ case 0x03: -+ continue; -+ } -+ page = block << (this->bbt_erase_shift - this->page_shift); -+ /* Check, if the block is used by the mirror table */ -+ if (!md || md->pages[chip] != page) -+ goto write; -+ } -+ puts ("No space left to write bad block table\r\n"); -+ return -ENOSPC; -+write: -+ -+ /* Set up shift count and masks for the flash table */ -+ bits = td->options & NAND_BBT_NRBITS_MSK; -+ switch (bits) { -+ case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x01; break; -+ case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x03; break; -+ case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; msk[2] = ~rcode; msk[3] = 0x0f; break; -+ case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break; -+ default: return -EINVAL; -+ } -+ -+ bbtoffs = chip * (numblocks >> 2); -+ -+ to = ((loff_t) page) << this->page_shift; -+ -+ memcpy (&oobinfo, this->autooob, sizeof(oobinfo)); -+ oobinfo.useecc = MTD_NANDECC_PLACEONLY; -+ -+ /* Must we save the block contents ? */ -+ if (td->options & NAND_BBT_SAVECONTENT) { -+ /* Make it block aligned */ -+ to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1)); -+ len = 1 << this->bbt_erase_shift; -+ res = mtd->read_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo); -+ if (res < 0) { -+ if (retlen != len) { -+ puts ("nand_bbt: Error reading block for writing the bad block table\r\n"); -+ return res; -+ } -+ puts ("nand_bbt: ECC error while reading block for writing bad block table\r\n"); -+ } -+ /* Calc the byte offset in the buffer */ -+ pageoffs = page - (int)(to >> this->page_shift); -+ offs = pageoffs << this->page_shift; -+ /* Preset the bbt area with 0xff */ -+ memset (&buf[offs], 0xff, (size_t)(numblocks >> sft)); -+ /* Preset the bbt's oob area with 0xff */ -+ memset (&buf[len + pageoffs * mtd->oobsize], 0xff, -+ ((len >> this->page_shift) - pageoffs) * mtd->oobsize); -+ if (td->options & NAND_BBT_VERSION) { -+ buf[len + (pageoffs * mtd->oobsize) + td->veroffs] = td->version[chip]; -+ } -+ } else { -+ /* Calc length */ -+ len = (size_t) (numblocks >> sft); -+ /* Make it page aligned ! */ -+ len = (len + (mtd->oobblock-1)) & ~(mtd->oobblock-1); -+ /* Preset the buffer with 0xff */ -+ memset (buf, 0xff, len + (len >> this->page_shift) * mtd->oobsize); -+ offs = 0; -+ /* Pattern is located in oob area of first page */ -+ memcpy (&buf[len + td->offs], td->pattern, td->len); -+ if (td->options & NAND_BBT_VERSION) { -+ buf[len + td->veroffs] = td->version[chip]; -+ } -+ } -+ -+ /* walk through the memory table */ -+ for (i = 0; i < numblocks; ) { -+ uint8_t dat; -+ dat = this->bbt[bbtoffs + (i >> 2)]; -+ for (j = 0; j < 4; j++ , i++) { -+ int sftcnt = (i << (3 - sft)) & sftmsk; -+ /* Do not store the reserved bbt blocks ! */ -+ buf[offs + (i >> sft)] &= ~(msk[dat & 0x03] << sftcnt); -+ dat >>= 2; -+ } -+ } -+ -+ memset (&einfo, 0, sizeof (einfo)); -+ einfo.mtd = mtd; -+ einfo.addr = (unsigned long) to; -+ einfo.len = 1 << this->bbt_erase_shift; -+ res = nand_erase_nand (mtd, &einfo, 1); -+ if (res < 0) { -+ puts ("nand_bbt: Error during block erase: "); -+ putx (res); -+ putnl(); -+ return res; -+ } -+ -+ res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo); -+ if (res < 0) { -+ puts ("nand_bbt: Error while writing bad block table "); -+ putx (res); -+ putnl (); -+ return res; -+ } -+ puts ("Bad block table written to "); -+ putx ((unsigned int) to); -+ puts (", version "); -+ putx (td->version[chip]); -+ putnl (); -+ -+ /* Mark it as used */ -+ td->pages[chip] = page; -+ } -+ return 0; -+} -+ -+/** -+ * nand_memory_bbt - [GENERIC] create a memory based bad block table -+ * @mtd: MTD device structure -+ * @bd: descriptor for the good/bad block search pattern -+ * -+ * The function creates a memory based bbt by scanning the device -+ * for manufacturer / software marked good / bad blocks -+*/ -+static inline int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ bd->options &= ~NAND_BBT_SCANEMPTY; -+ return create_bbt (mtd, this->data_buf, bd, -1); -+} -+ -+/** -+ * check_create - [GENERIC] create and write bbt(s) if neccecary -+ * @mtd: MTD device structure -+ * @buf: temporary buffer -+ * @bd: descriptor for the good/bad block search pattern -+ * -+ * The function checks the results of the previous call to read_bbt -+ * and creates / updates the bbt(s) if neccecary -+ * Creation is neccecary if no bbt was found for the chip/device -+ * Update is neccecary if one of the tables is missing or the -+ * version nr. of one table is less than the other -+*/ -+static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd) -+{ -+ int i, chips, writeops, chipsel, res; -+ struct nand_chip *this = mtd->priv; -+ struct nand_bbt_descr *td = this->bbt_td; -+ struct nand_bbt_descr *md = this->bbt_md; -+ struct nand_bbt_descr *rd, *rd2; -+ -+ /* Do we have a bbt per chip ? */ -+ if (td->options & NAND_BBT_PERCHIP) -+ chips = this->numchips; -+ else -+ chips = 1; -+ -+ for (i = 0; i < chips; i++) { -+ writeops = 0; -+ rd = NULL; -+ rd2 = NULL; -+ /* Per chip or per device ? */ -+ chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1; -+ /* Mirrored table avilable ? */ -+ if (md) { -+ if (td->pages[i] == -1 && md->pages[i] == -1) { -+ writeops = 0x03; -+ goto create; -+ } -+ -+ if (td->pages[i] == -1) { -+ rd = md; -+ td->version[i] = md->version[i]; -+ writeops = 1; -+ goto writecheck; -+ } -+ -+ if (md->pages[i] == -1) { -+ rd = td; -+ md->version[i] = td->version[i]; -+ writeops = 2; -+ goto writecheck; -+ } -+ -+ if (td->version[i] == md->version[i]) { -+ rd = td; -+ if (!(td->options & NAND_BBT_VERSION)) -+ rd2 = md; -+ goto writecheck; -+ } -+ -+ if (((int8_t) (td->version[i] - md->version[i])) > 0) { -+ rd = td; -+ md->version[i] = td->version[i]; -+ writeops = 2; -+ } else { -+ rd = md; -+ td->version[i] = md->version[i]; -+ writeops = 1; -+ } -+ -+ goto writecheck; -+ -+ } else { -+ if (td->pages[i] == -1) { -+ writeops = 0x01; -+ goto create; -+ } -+ rd = td; -+ goto writecheck; -+ } -+create: -+ /* Create the bad block table by scanning the device ? */ -+ if (!(td->options & NAND_BBT_CREATE)) -+ continue; -+ -+ /* Create the table in memory by scanning the chip(s) */ -+ create_bbt (mtd, buf, bd, chipsel); -+ -+ td->version[i] = 1; -+ if (md) -+ md->version[i] = 1; -+writecheck: -+ /* read back first ? */ -+ if (rd) -+ read_abs_bbt (mtd, buf, rd, chipsel); -+ /* If they weren't versioned, read both. */ -+ if (rd2) -+ read_abs_bbt (mtd, buf, rd2, chipsel); -+ -+ /* Write the bad block table to the device ? */ -+ if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) { -+ res = write_bbt (mtd, buf, td, md, chipsel); -+ if (res < 0) -+ return res; -+ } -+ -+ /* Write the mirror bad block table to the device ? */ -+ if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) { -+ res = write_bbt (mtd, buf, md, td, chipsel); -+ if (res < 0) -+ return res; -+ } -+ } -+ return 0; -+} -+ -+/** -+ * mark_bbt_regions - [GENERIC] mark the bad block table regions -+ * @mtd: MTD device structure -+ * @td: bad block table descriptor -+ * -+ * The bad block table regions are marked as "bad" to prevent -+ * accidental erasures / writes. The regions are identified by -+ * the mark 0x02. -+*/ -+static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td) -+{ -+ struct nand_chip *this = mtd->priv; -+ int i, j, chips, block, nrblocks, update; -+ uint8_t oldval, newval; -+ -+ /* Do we have a bbt per chip ? */ -+ if (td->options & NAND_BBT_PERCHIP) { -+ chips = this->numchips; -+ nrblocks = (int)(this->chipsize >> this->bbt_erase_shift); -+ } else { -+ chips = 1; -+ nrblocks = (int)(mtd->size >> this->bbt_erase_shift); -+ } -+ -+ for (i = 0; i < chips; i++) { -+ if ((td->options & NAND_BBT_ABSPAGE) || -+ !(td->options & NAND_BBT_WRITE)) { -+ if (td->pages[i] == -1) continue; -+ block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift); -+ block <<= 1; -+ oldval = this->bbt[(block >> 3)]; -+ newval = oldval | (0x2 << (block & 0x06)); -+ this->bbt[(block >> 3)] = newval; -+ if ((oldval != newval) && td->reserved_block_code) -+ nand_update_bbt(mtd, block << (this->bbt_erase_shift - 1)); -+ continue; -+ } -+ update = 0; -+ if (td->options & NAND_BBT_LASTBLOCK) -+ block = ((i + 1) * nrblocks) - td->maxblocks; -+ else -+ block = i * nrblocks; -+ block <<= 1; -+ for (j = 0; j < td->maxblocks; j++) { -+ oldval = this->bbt[(block >> 3)]; -+ newval = oldval | (0x2 << (block & 0x06)); -+ this->bbt[(block >> 3)] = newval; -+ if (oldval != newval) update = 1; -+ block += 2; -+ } -+ /* If we want reserved blocks to be recorded to flash, and some -+ new ones have been marked, then we need to update the stored -+ bbts. This should only happen once. */ -+ if (update && td->reserved_block_code) -+ nand_update_bbt(mtd, (block - 2) << (this->bbt_erase_shift - 1)); -+ } -+} -+ -+/** -+ * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s) -+ * @mtd: MTD device structure -+ * @bd: descriptor for the good/bad block search pattern -+ * -+ * The function checks, if a bad block table(s) is/are already -+ * available. If not it scans the device for manufacturer -+ * marked good / bad blocks and writes the bad block table(s) to -+ * the selected place. -+ * -+ * The bad block table memory is allocated here. It must be freed -+ * by calling the nand_free_bbt function. -+ * -+*/ -+int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) -+{ -+ struct nand_chip *this = mtd->priv; -+ int len, res = 0; -+ uint8_t *buf; -+ struct nand_bbt_descr *td = this->bbt_td; -+ struct nand_bbt_descr *md = this->bbt_md; -+ -+ len = mtd->size >> (this->bbt_erase_shift + 2); -+ /* Allocate memory (2bit per block) */ -+ this->bbt = malloc (len); -+ if (!this->bbt) { -+ puts ("nand_scan_bbt: Out of memory\r\n"); -+ return -ENOMEM; -+ } -+ /* Clear the memory bad block table */ -+ memset (this->bbt, 0x00, len); -+ -+ /* If no primary table decriptor is given, scan the device -+ * to build a memory based bad block table -+ */ -+ if (!td) { -+ if ((res = nand_memory_bbt(mtd, bd))) { -+ puts ("nand_bbt: Can't scan flash and build the RAM-based BBT\r\n"); -+ free (this->bbt); -+ this->bbt = NULL; -+ } -+ return res; -+ } -+ -+ /* Allocate a temporary buffer for one eraseblock incl. oob */ -+ len = (1 << this->bbt_erase_shift); -+ len += (len >> this->page_shift) * mtd->oobsize; -+ buf = malloc (len); -+ if (!buf) { -+ puts ("nand_bbt: Out of memory\r\n"); -+ free (this->bbt); -+ this->bbt = NULL; -+ return -ENOMEM; -+ } -+ -+ /* Is the bbt at a given page ? */ -+ if (td->options & NAND_BBT_ABSPAGE) { -+ res = read_abs_bbts (mtd, buf, td, md); -+ } else { -+ /* Search the bad block table using a pattern in oob */ -+ res = search_read_bbts (mtd, buf, td, md); -+ } -+ -+ if (res) -+ res = check_create (mtd, buf, bd); -+ -+ /* Prevent the bbt regions from erasing / writing */ -+ mark_bbt_region (mtd, td); -+ if (md) -+ mark_bbt_region (mtd, md); -+ -+ free (buf); -+ return res; -+} -+ -+ -+/** -+ * nand_update_bbt - [NAND Interface] update bad block table(s) -+ * @mtd: MTD device structure -+ * @offs: the offset of the newly marked block -+ * -+ * The function updates the bad block table(s) -+*/ -+int nand_update_bbt (struct mtd_info *mtd, loff_t offs) -+{ -+ struct nand_chip *this = mtd->priv; -+ int len, res = 0, writeops = 0; -+ int chip, chipsel; -+ uint8_t *buf; -+ struct nand_bbt_descr *td = this->bbt_td; -+ struct nand_bbt_descr *md = this->bbt_md; -+ -+ if (!this->bbt || !td) -+ return -EINVAL; -+ -+ len = mtd->size >> (this->bbt_erase_shift + 2); -+ /* Allocate a temporary buffer for one eraseblock incl. oob */ -+ len = (1 << this->bbt_erase_shift); -+ len += (len >> this->page_shift) * mtd->oobsize; -+ buf = malloc (len); -+ if (!buf) { -+ puts ("nand_update_bbt: Out of memory\r\n"); -+ return -ENOMEM; -+ } -+ -+ writeops = md != NULL ? 0x03 : 0x01; -+ -+ /* Do we have a bbt per chip ? */ -+ if (td->options & NAND_BBT_PERCHIP) { -+ chip = (int) (offs >> this->chip_shift); -+ chipsel = chip; -+ } else { -+ chip = 0; -+ chipsel = -1; -+ } -+ -+ td->version[chip]++; -+ if (md) -+ md->version[chip]++; -+ -+ /* Write the bad block table to the device ? */ -+ if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) { -+ res = write_bbt (mtd, buf, td, md, chipsel); -+ if (res < 0) -+ goto out; -+ } -+ /* Write the mirror bad block table to the device ? */ -+ if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) { -+ res = write_bbt (mtd, buf, md, td, chipsel); -+ } -+ -+out: -+ free (buf); -+ return res; -+} -+ -+/* Define some generic bad / good block scan pattern which are used -+ * while scanning a device for factory marked good / bad blocks. */ -+static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; -+ -+static struct nand_bbt_descr smallpage_memorybased = { -+ .options = NAND_BBT_SCAN2NDPAGE, -+ .offs = 5, -+ .len = 1, -+ .pattern = scan_ff_pattern -+}; -+ -+static struct nand_bbt_descr largepage_memorybased = { -+ .options = 0, -+ .offs = 0, -+ .len = 2, -+ .pattern = scan_ff_pattern -+}; -+ -+static struct nand_bbt_descr smallpage_flashbased = { -+ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, -+ .offs = 5, -+ .len = 1, -+ .pattern = scan_ff_pattern -+}; -+ -+static struct nand_bbt_descr largepage_flashbased = { -+ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, -+ .offs = 0, -+ .len = 2, -+ .pattern = scan_ff_pattern -+}; -+ -+static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 }; -+ -+static struct nand_bbt_descr agand_flashbased = { -+ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, -+ .offs = 0x20, -+ .len = 6, -+ .pattern = scan_agand_pattern -+}; -+ -+/* Generic flash bbt decriptors -+*/ -+static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; -+static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' }; -+ -+static struct nand_bbt_descr bbt_main_descr = { -+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE -+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, -+ .offs = 8, -+ .len = 4, -+ .veroffs = 12, -+ .maxblocks = 4, -+ .pattern = bbt_pattern -+}; -+ -+static struct nand_bbt_descr bbt_mirror_descr = { -+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE -+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, -+ .offs = 8, -+ .len = 4, -+ .veroffs = 12, -+ .maxblocks = 4, -+ .pattern = mirror_pattern -+}; -+ -+/** -+ * nand_default_bbt - [NAND Interface] Select a default bad block table for the device -+ * @mtd: MTD device structure -+ * -+ * This function selects the default bad block table -+ * support for the device and calls the nand_scan_bbt function -+ * -+*/ -+int nand_default_bbt (struct mtd_info *mtd) -+{ -+ struct nand_chip *this = mtd->priv; -+ -+ /* Default for AG-AND. We must use a flash based -+ * bad block table as the devices have factory marked -+ * _good_ blocks. Erasing those blocks leads to loss -+ * of the good / bad information, so we _must_ store -+ * this information in a good / bad table during -+ * startup -+ */ -+ if (this->options & NAND_IS_AND) { -+ /* Use the default pattern descriptors */ -+ if (!this->bbt_td) { -+ this->bbt_td = &bbt_main_descr; -+ this->bbt_md = &bbt_mirror_descr; -+ } -+ this->options |= NAND_USE_FLASH_BBT; -+ return nand_scan_bbt (mtd, &agand_flashbased); -+ } -+ -+ -+ /* Is a flash based bad block table requested ? */ -+ if (this->options & NAND_USE_FLASH_BBT) { -+ /* Use the default pattern descriptors */ -+ if (!this->bbt_td) { -+ this->bbt_td = &bbt_main_descr; -+ this->bbt_md = &bbt_mirror_descr; -+ } -+ if (!this->badblock_pattern) { -+ this->badblock_pattern = (mtd->oobblock > 512) ? -+ &largepage_flashbased : &smallpage_flashbased; -+ } -+ } else { -+ this->bbt_td = NULL; -+ this->bbt_md = NULL; -+ if (!this->badblock_pattern) { -+ this->badblock_pattern = (mtd->oobblock > 512) ? -+ &largepage_memorybased : &smallpage_memorybased; -+ } -+ } -+ return nand_scan_bbt (mtd, this->badblock_pattern); -+} -+ -+/** -+ * nand_isbad_bbt - [NAND Interface] Check if a block is bad -+ * @mtd: MTD device structure -+ * @offs: offset in the device -+ * @allowbbt: allow access to bad block table region -+ * -+*/ -+int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt) -+{ -+ struct nand_chip *this = mtd->priv; -+ int block; -+ uint8_t res; -+ -+ /* Get block number * 2 */ -+ block = (int) (offs >> (this->bbt_erase_shift - 1)); -+ res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; -+ -+ DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", -+ (unsigned int)offs, block >> 1, res); -+ -+ switch ((int)res) { -+ case 0x00: return 0; -+ case 0x01: return 1; -+ case 0x02: return allowbbt ? 0 : 1; -+ } -+ return 1; -+} -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.c 2006-08-04 16:38:14.000000000 +0200 -@@ -0,0 +1,246 @@ -+/* -+ * This file contains an ECC algorithm from Toshiba that detects and -+ * corrects 1 bit errors in a 256 byte block of data. -+ * -+ * Taken from drivers/mtd/nand/nand_ecc.c, modified for -+ * NAND flash boot on Etrax FS. -+ * -+ * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com) -+ * Toshiba America Electronics Components, Inc. -+ * -+ * $Id: nand_ecc.c,v 1.1 2006/08/04 14:38:14 ricardw Exp $ -+ * -+ * This file is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 or (at your option) any -+ * later version. -+ * -+ * This file is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this file; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. -+ * -+ * As a special exception, if other files instantiate templates or use -+ * macros or inline functions from these files, or you compile these -+ * files and link them with other works to produce a work based on these -+ * files, these files do not by themselves cause the resulting work to be -+ * covered by the GNU General Public License. However the source code for -+ * these files must still be made available in accordance with section (3) -+ * of the GNU General Public License. -+ * -+ * This exception does not invalidate any other reasons why a work based on -+ * this file might be covered by the GNU General Public License. -+ */ -+ -+#include -+#if 0 -+#include -+#include -+#endif -+#include "nand_ecc.h" -+ -+/* -+ * Pre-calculated 256-way 1 byte column parity -+ */ -+static const u_char nand_ecc_precalc_table[] = { -+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00, -+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, -+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, -+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, -+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, -+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, -+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, -+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, -+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, -+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, -+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, -+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, -+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, -+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, -+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, -+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00 -+}; -+ -+ -+/** -+ * nand_trans_result - [GENERIC] create non-inverted ECC -+ * @reg2: line parity reg 2 -+ * @reg3: line parity reg 3 -+ * @ecc_code: ecc -+ * -+ * Creates non-inverted ECC code from line parity -+ */ -+static void nand_trans_result(u_char reg2, u_char reg3, -+ u_char *ecc_code) -+{ -+ u_char a, b, i, tmp1, tmp2; -+ -+ /* Initialize variables */ -+ a = b = 0x80; -+ tmp1 = tmp2 = 0; -+ -+ /* Calculate first ECC byte */ -+ for (i = 0; i < 4; i++) { -+ if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */ -+ tmp1 |= b; -+ b >>= 1; -+ if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */ -+ tmp1 |= b; -+ b >>= 1; -+ a >>= 1; -+ } -+ -+ /* Calculate second ECC byte */ -+ b = 0x80; -+ for (i = 0; i < 4; i++) { -+ if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */ -+ tmp2 |= b; -+ b >>= 1; -+ if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */ -+ tmp2 |= b; -+ b >>= 1; -+ a >>= 1; -+ } -+ -+ /* Store two of the ECC bytes */ -+ ecc_code[0] = tmp1; -+ ecc_code[1] = tmp2; -+} -+ -+/** -+ * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block -+ * @mtd: MTD block structure -+ * @dat: raw data -+ * @ecc_code: buffer for ECC -+ */ -+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) -+{ -+ u_char idx, reg1, reg2, reg3; -+ int j; -+ -+ /* Initialize variables */ -+ reg1 = reg2 = reg3 = 0; -+ ecc_code[0] = ecc_code[1] = ecc_code[2] = 0; -+ -+ /* Build up column parity */ -+ for(j = 0; j < 256; j++) { -+ -+ /* Get CP0 - CP5 from table */ -+ idx = nand_ecc_precalc_table[dat[j]]; -+ reg1 ^= (idx & 0x3f); -+ -+ /* All bit XOR = 1 ? */ -+ if (idx & 0x40) { -+ reg3 ^= (u_char) j; -+ reg2 ^= ~((u_char) j); -+ } -+ } -+ -+ /* Create non-inverted ECC code from line parity */ -+ nand_trans_result(reg2, reg3, ecc_code); -+ -+ /* Calculate final ECC code */ -+ ecc_code[0] = ~ecc_code[0]; -+ ecc_code[1] = ~ecc_code[1]; -+ ecc_code[2] = ((~reg1) << 2) | 0x03; -+ return 0; -+} -+ -+/** -+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s) -+ * @mtd: MTD block structure -+ * @dat: raw data read from the chip -+ * @read_ecc: ECC from the chip -+ * @calc_ecc: the ECC calculated from raw data -+ * -+ * Detect and correct a 1 bit error for 256 byte block -+ */ -+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) -+{ -+ u_char a, b, c, d1, d2, d3, add, bit, i; -+ -+ /* Do error detection */ -+ d1 = calc_ecc[0] ^ read_ecc[0]; -+ d2 = calc_ecc[1] ^ read_ecc[1]; -+ d3 = calc_ecc[2] ^ read_ecc[2]; -+ -+ if ((d1 | d2 | d3) == 0) { -+ /* No errors */ -+ return 0; -+ } -+ else { -+ a = (d1 ^ (d1 >> 1)) & 0x55; -+ b = (d2 ^ (d2 >> 1)) & 0x55; -+ c = (d3 ^ (d3 >> 1)) & 0x54; -+ -+ /* Found and will correct single bit error in the data */ -+ if ((a == 0x55) && (b == 0x55) && (c == 0x54)) { -+ c = 0x80; -+ add = 0; -+ a = 0x80; -+ for (i=0; i<4; i++) { -+ if (d1 & c) -+ add |= a; -+ c >>= 2; -+ a >>= 1; -+ } -+ c = 0x80; -+ for (i=0; i<4; i++) { -+ if (d2 & c) -+ add |= a; -+ c >>= 2; -+ a >>= 1; -+ } -+ bit = 0; -+ b = 0x04; -+ c = 0x80; -+ for (i=0; i<3; i++) { -+ if (d3 & c) -+ bit |= b; -+ c >>= 2; -+ b >>= 1; -+ } -+ b = 0x01; -+ a = dat[add]; -+ a ^= (b << bit); -+ dat[add] = a; -+ return 1; -+ } -+ else { -+ i = 0; -+ while (d1) { -+ if (d1 & 0x01) -+ ++i; -+ d1 >>= 1; -+ } -+ while (d2) { -+ if (d2 & 0x01) -+ ++i; -+ d2 >>= 1; -+ } -+ while (d3) { -+ if (d3 & 0x01) -+ ++i; -+ d3 >>= 1; -+ } -+ if (i == 1) { -+ /* ECC Code Error Correction */ -+ read_ecc[0] = calc_ecc[0]; -+ read_ecc[1] = calc_ecc[1]; -+ read_ecc[2] = calc_ecc[2]; -+ return 2; -+ } -+ else { -+ /* Uncorrectable Error */ -+ return -1; -+ } -+ } -+ } -+ -+ /* Should never happen */ -+ return -1; -+} -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.h ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.h 2006-08-04 16:38:14.000000000 +0200 -@@ -0,0 +1,30 @@ -+/* -+ * drivers/mtd/nand_ecc.h -+ * -+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) -+ * -+ * $Id: nand_ecc.h,v 1.1 2006/08/04 14:38:14 ricardw Exp $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This file is the header for the ECC algorithm. -+ */ -+ -+#ifndef __MTD_NAND_ECC_H__ -+#define __MTD_NAND_ECC_H__ -+ -+struct mtd_info; -+ -+/* -+ * Calculate 3 byte ECC code for 256 byte block -+ */ -+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); -+ -+/* -+ * Detect and correct a 1 bit error for 256 byte block -+ */ -+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); -+ -+#endif /* __MTD_NAND_ECC_H__ */ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ids.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ids.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ids.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ids.c 2006-08-04 16:38:14.000000000 +0200 -@@ -0,0 +1,133 @@ -+/* -+ * drivers/mtd/nandids.c -+ * -+ * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) -+ * -+ * $Id: nand_ids.c,v 1.1 2006/08/04 14:38:14 ricardw Exp $ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+#if 0 -+#include -+#endif -+ -+#include "nand.h" -+/* -+* Chip ID list -+* -+* Name. ID code, pagesize, chipsize in MegaByte, eraseblock size, -+* options -+* -+* Pagesize; 0, 256, 512 -+* 0 get this information from the extended chip ID -++ 256 256 Byte page size -+* 512 512 Byte page size -+*/ -+struct nand_flash_dev nand_flash_ids[] = { -+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0}, -+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0}, -+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0}, -+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0}, -+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0}, -+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0}, -+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0}, -+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0}, -+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0}, -+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0}, -+ -+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0}, -+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0}, -+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16}, -+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16}, -+ -+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0}, -+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0}, -+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16}, -+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16}, -+ -+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0}, -+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0}, -+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16}, -+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16}, -+ -+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0}, -+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0}, -+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16}, -+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, -+ -+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, -+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0}, -+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, -+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, -+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16}, -+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, -+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16}, -+ -+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, -+ -+ /* These are the new chips with large page size. The pagesize -+ * and the erasesize is determined from the extended id bytes -+ */ -+ /*512 Megabit */ -+ {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ -+ /* 1 Gigabit */ -+ {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ -+ /* 2 Gigabit */ -+ {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ -+ /* 4 Gigabit */ -+ {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ -+ /* 8 Gigabit */ -+ {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ -+ /* 16 Gigabit */ -+ {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, -+ {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, -+ -+ /* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout ! -+ * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes -+ * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 -+ * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go -+ * There are more speed improvements for reads and writes possible, but not implemented now -+ */ -+ {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH}, -+ -+ {NULL,} -+}; -+ -+/* -+* Manufacturer ID list -+*/ -+struct nand_manufacturers nand_manuf_ids[] = { -+ {NAND_MFR_TOSHIBA, "Toshiba"}, -+ {NAND_MFR_SAMSUNG, "Samsung"}, -+ {NAND_MFR_FUJITSU, "Fujitsu"}, -+ {NAND_MFR_NATIONAL, "National"}, -+ {NAND_MFR_RENESAS, "Renesas"}, -+ {NAND_MFR_STMICRO, "ST Micro"}, -+ {NAND_MFR_HYNIX, "Hynix"}, -+ {0x0, "Unknown"} -+}; -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/rescue.ld linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/rescue.ld ---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/rescue.ld 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/rescue.ld 2006-10-18 10:52:47.000000000 +0200 -@@ -1,20 +1,40 @@ --MEMORY -+/*#OUTPUT_FORMAT(elf32-us-cris) */ -+OUTPUT_ARCH (crisv32) -+ -+MEMORY - { -- flash : ORIGIN = 0x00000000, -- LENGTH = 0x00100000 -+ bootblk : ORIGIN = 0x38000000, -+ LENGTH = 0x00004000 -+ intmem : ORIGIN = 0x38004000, -+ LENGTH = 0x00005000 - } - - SECTIONS - { - .text : - { -- stext = . ; -+ _stext = . ; - *(.text) -- etext = . ; -- } > flash -+ *(.rodata) -+ *(.rodata.*) -+ _etext = . ; -+ } > bootblk - .data : - { - *(.data) -- edata = . ; -- } > flash -+ _edata = . ; -+ } > bootblk -+ .bss : -+ { -+ _bss = . ; -+ *(.bss) -+ _end = ALIGN( 0x10 ) ; -+ } > intmem -+ -+ /* Get rid of stuff from EXPORT_SYMBOL(foo). */ -+ /DISCARD/ : -+ { -+ *(__ksymtab_strings) -+ *(__ksymtab) -+ } - } -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Kconfig linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Kconfig ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Kconfig 2007-01-29 16:14:16.000000000 +0100 -@@ -6,14 +6,6 @@ - This option enables the ETRAX FS built-in 10/100Mbit Ethernet - controller. - --config ETRAX_ETHERNET_HW_CSUM -- bool "Hardware accelerated ethernet checksum and scatter/gather" -- depends on ETRAX_ETHERNET -- depends on ETRAX_STREAMCOPROC -- default y -- help -- Hardware acceleration of checksumming and scatter/gather -- - config ETRAX_ETHERNET_IFACE0 - depends on ETRAX_ETHERNET - bool "Enable network interface 0" -@@ -23,6 +15,52 @@ - bool "Enable network interface 1 (uses DMA6 and DMA7)" - - choice -+ prompt "Eth0 led group" -+ depends on ETRAX_ETHERNET_IFACE0 -+ default ETRAX_ETH0_USE_LEDGRP0 -+ -+config ETRAX_ETH0_USE_LEDGRP0 -+ bool "Use LED grp 0" -+ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO -+ help -+ Use LED grp 0 for eth0 -+ -+config ETRAX_ETH0_USE_LEDGRP1 -+ bool "Use LED grp 1" -+ depends on ETRAX_NBR_LED_GRP_TWO -+ help -+ Use LED grp 1 for eth0 -+ -+config ETRAX_ETH0_USE_LEDGRPNULL -+ bool "Use no LEDs for eth0" -+ help -+ Use no LEDs for eth0 -+endchoice -+ -+choice -+ prompt "Eth1 led group" -+ depends on ETRAX_ETHERNET_IFACE1 -+ default ETRAX_ETH1_USE_LEDGRP1 -+ -+config ETRAX_ETH1_USE_LEDGRP0 -+ bool "Use LED grp 0" -+ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO -+ help -+ Use LED grp 0 for eth1 -+ -+config ETRAX_ETH1_USE_LEDGRP1 -+ bool "Use LED grp 1" -+ depends on ETRAX_NBR_LED_GRP_TWO -+ help -+ Use LED grp 1 for eth1 -+ -+config ETRAX_ETH1_USE_LEDGRPNULL -+ bool "Use no LEDs for eth1" -+ help -+ Use no LEDs for eth1 -+endchoice -+ -+choice - prompt "Network LED behavior" - depends on ETRAX_ETHERNET - default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY -@@ -56,10 +94,25 @@ - config ETRAXFS_SERIAL - bool "Serial-port support" - depends on ETRAX_ARCH_V32 -+ select SERIAL_CORE -+ select SERIAL_CORE_CONSOLE - help - Enables the ETRAX FS serial driver for ser0 (ttyS0) - You probably want this enabled. - -+config ETRAX_RS485 -+ bool "RS-485 support" -+ depends on ETRAXFS_SERIAL -+ help -+ Enables support for RS-485 serial communication. -+ -+config ETRAX_RS485_DISABLE_RECEIVER -+ bool "Disable serial receiver" -+ depends on ETRAX_RS485 -+ help -+ It is necessary to disable the serial receiver to avoid serial -+ loopback. Not all products are able to do this in software only. -+ - config ETRAX_SERIAL_PORT0 - bool "Serial port 0 enabled" - depends on ETRAXFS_SERIAL -@@ -70,6 +123,31 @@ - ser0 can use dma4 or dma6 for output and dma5 or dma7 for input. - - choice -+ prompt "Ser0 default port type " -+ depends on ETRAX_SERIAL_PORT0 -+ default ETRAX_SERIAL_PORT0_TYPE_232 -+ help -+ Type of serial port. -+ -+config ETRAX_SERIAL_PORT0_TYPE_232 -+ bool "Ser0 is a RS-232 port" -+ help -+ Configure serial port 0 to be a RS-232 port. -+ -+config ETRAX_SERIAL_PORT0_TYPE_485HD -+ bool "Ser0 is a half duplex RS-485 port" -+ depends on ETRAX_RS485 -+ help -+ Configure serial port 0 to be a half duplex (two wires) RS-485 port. -+ -+config ETRAX_SERIAL_PORT0_TYPE_485FD -+ bool "Ser0 is a full duplex RS-485 port" -+ depends on ETRAX_RS485 -+ help -+ Configure serial port 0 to be a full duplex (four wires) RS-485 port. -+endchoice -+ -+choice - prompt "Ser0 DMA in channel " - depends on ETRAX_SERIAL_PORT0 - default ETRAX_SERIAL_PORT0_NO_DMA_IN -@@ -139,6 +217,31 @@ - Enables the ETRAX FS serial driver for ser1 (ttyS1). - - choice -+ prompt "Ser1 default port type" -+ depends on ETRAX_SERIAL_PORT1 -+ default ETRAX_SERIAL_PORT1_TYPE_232 -+ help -+ Type of serial port. -+ -+config ETRAX_SERIAL_PORT1_TYPE_232 -+ bool "Ser1 is a RS-232 port" -+ help -+ Configure serial port 1 to be a RS-232 port. -+ -+config ETRAX_SERIAL_PORT1_TYPE_485HD -+ bool "Ser1 is a half duplex RS-485 port" -+ depends on ETRAX_RS485 -+ help -+ Configure serial port 1 to be a half duplex (two wires) RS-485 port. -+ -+config ETRAX_SERIAL_PORT1_TYPE_485FD -+ bool "Ser1 is a full duplex RS-485 port" -+ depends on ETRAX_RS485 -+ help -+ Configure serial port 1 to be a full duplex (four wires) RS-485 port. -+endchoice -+ -+choice - prompt "Ser1 DMA in channel " - depends on ETRAX_SERIAL_PORT1 - default ETRAX_SERIAL_PORT1_NO_DMA_IN -@@ -210,6 +313,31 @@ - Enables the ETRAX FS serial driver for ser2 (ttyS2). - - choice -+ prompt "Ser2 default port type" -+ depends on ETRAX_SERIAL_PORT2 -+ default ETRAX_SERIAL_PORT2_TYPE_232 -+ help -+ What DMA channel to use for ser2 -+ -+config ETRAX_SERIAL_PORT2_TYPE_232 -+ bool "Ser2 is a RS-232 port" -+ help -+ Configure serial port 2 to be a RS-232 port. -+ -+config ETRAX_SERIAL_PORT2_TYPE_485HD -+ bool "Ser2 is a half duplex RS-485 port" -+ depends on ETRAX_RS485 -+ help -+ Configure serial port 2 to be a half duplex (two wires) RS-485 port. -+ -+config ETRAX_SERIAL_PORT2_TYPE_485FD -+ bool "Ser2 is a full duplex RS-485 port" -+ depends on ETRAX_RS485 -+ help -+ Configure serial port 2 to be a full duplex (four wires) RS-485 port. -+endchoice -+ -+choice - prompt "Ser2 DMA in channel " - depends on ETRAX_SERIAL_PORT2 - default ETRAX_SERIAL_PORT2_NO_DMA_IN -@@ -279,6 +407,31 @@ - Enables the ETRAX FS serial driver for ser3 (ttyS3). - - choice -+ prompt "Ser3 default port type" -+ depends on ETRAX_SERIAL_PORT3 -+ default ETRAX_SERIAL_PORT3_TYPE_232 -+ help -+ What DMA channel to use for ser3. -+ -+config ETRAX_SERIAL_PORT3_TYPE_232 -+ bool "Ser3 is a RS-232 port" -+ help -+ Configure serial port 3 to be a RS-232 port. -+ -+config ETRAX_SERIAL_PORT3_TYPE_485HD -+ bool "Ser3 is a half duplex RS-485 port" -+ depends on ETRAX_RS485 -+ help -+ Configure serial port 3 to be a half duplex (two wires) RS-485 port. -+ -+config ETRAX_SERIAL_PORT3_TYPE_485FD -+ bool "Ser3 is a full duplex RS-485 port" -+ depends on ETRAX_RS485 -+ help -+ Configure serial port 3 to be a full duplex (four wires) RS-485 port. -+endchoice -+ -+choice - prompt "Ser3 DMA in channel " - depends on ETRAX_SERIAL_PORT3 - default ETRAX_SERIAL_PORT3_NO_DMA_IN -@@ -341,38 +494,6 @@ - string "Ser 3 CD bit (empty = not used)" - depends on ETRAX_SERIAL_PORT3 - --config ETRAX_RS485 -- bool "RS-485 support" -- depends on ETRAX_SERIAL -- help -- Enables support for RS-485 serial communication. For a primer on -- RS-485, see . -- --config ETRAX_RS485_DISABLE_RECEIVER -- bool "Disable serial receiver" -- depends on ETRAX_RS485 -- help -- It is necessary to disable the serial receiver to avoid serial -- loopback. Not all products are able to do this in software only. -- Axis 2400/2401 must disable receiver. -- --config ETRAX_AXISFLASHMAP -- bool "Axis flash-map support" -- depends on ETRAX_ARCH_V32 -- select MTD -- select MTD_CFI -- select MTD_CFI_AMDSTD -- select MTD_OBSOLETE_CHIPS -- select MTD_AMDSTD -- select MTD_CHAR -- select MTD_BLOCK -- select MTD_PARTITIONS -- select MTD_CONCAT -- select MTD_COMPLEX_MAPPINGS -- help -- This option enables MTD mapping of flash devices. Needed to use -- flash memories. If unsure, say Y. -- - config ETRAX_SYNCHRONOUS_SERIAL - bool "Synchronous serial-port support" - depends on ETRAX_ARCH_V32 -@@ -405,6 +526,31 @@ - A synchronous serial port can run in manual or DMA mode. - Selecting this option will make it run in DMA mode. - -+config ETRAX_AXISFLASHMAP -+ bool "Axis flash-map support" -+ depends on ETRAX_ARCH_V32 -+ select MTD -+ select MTD_CFI -+ select MTD_CFI_AMDSTD -+ select MTD_JEDECPROBE -+ select MTD_CHAR -+ select MTD_BLOCK -+ select MTD_PARTITIONS -+ select MTD_CONCAT -+ select MTD_COMPLEX_MAPPINGS -+ help -+ This option enables MTD mapping of flash devices. Needed to use -+ flash memories. If unsure, say Y. -+ -+config ETRAX_AXISFLASHMAP_MTD0WHOLE -+ bool "MTD0 is whole boot flash device" -+ depends on ETRAX_AXISFLASHMAP -+ default N -+ help -+ When this option is not set, mtd0 refers to the first partition -+ on the boot flash device. When set, mtd0 refers to the whole -+ device, with mtd1 referring to the first partition etc. -+ - config ETRAX_PTABLE_SECTOR - int "Byte-offset of partition table sector" - depends on ETRAX_AXISFLASHMAP -@@ -425,11 +571,19 @@ - This option enables MTD mapping of NAND flash devices. Needed to use - NAND flash memories. If unsure, say Y. - -+config ETRAX_NANDBOOT -+ bool "Boot from NAND flash" -+ depends on ETRAX_NANDFLASH -+ help -+ This options enables booting from NAND flash devices. -+ Say Y if your boot code, kernel and root file system is in -+ NAND flash. Say N if they are in NOR flash. -+ - config ETRAX_I2C - bool "I2C driver" - depends on ETRAX_ARCH_V32 - help -- This option enabled the I2C driver used by e.g. the RTC driver. -+ This option enables the I2C driver used by e.g. the RTC driver. - - config ETRAX_I2C_DATA_PORT - string "I2C data pin" -@@ -476,18 +630,19 @@ - Remember that you need to setup the port directions appropriately in - the General configuration. - --config ETRAX_PA_BUTTON_BITMASK -- hex "PA-buttons bitmask" -+config ETRAX_VIRTUAL_GPIO -+ bool "Virtual GPIO support" - depends on ETRAX_GPIO -- default "0x02" - help -- This is a bitmask (8 bits) with information about what bits on PA -- that are used for buttons. -- Most products has a so called TEST button on PA1, if that is true -- use 0x02 here. -- Use 00 if there are no buttons on PA. -- If the bitmask is <> 00 a button driver will be included in the gpio -- driver. ETRAX general I/O support must be enabled. -+ Enables the virtual Etrax general port device (major 120, minor 6). -+ It uses an I/O expander for the I2C-bus. -+ -+config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN -+ int "Virtual GPIO interrupt pin on PA pin" -+ range 0 7 -+ depends on ETRAX_VIRTUAL_GPIO -+ help -+ The pin to use on PA for virtual gpio interrupt. - - config ETRAX_PA_CHANGEABLE_DIR - hex "PA user changeable dir mask" -@@ -584,6 +739,25 @@ - that a user can change the value on using ioctl's. - Bit set = changeable. - -+config ETRAX_PV_CHANGEABLE_DIR -+ hex "PV user changeable dir mask" -+ depends on ETRAX_VIRTUAL_GPIO -+ default "0x0000" -+ help -+ This is a bitmask (16 bits) with information of what bits in PV -+ that a user can change direction on using ioctl's. -+ Bit set = changeable. -+ You probably want 0x0000 here, but it depends on your hardware. -+ -+config ETRAX_PV_CHANGEABLE_BITS -+ hex "PV user changeable bits mask" -+ depends on ETRAX_VIRTUAL_GPIO -+ default "0x0000" -+ help -+ This is a bitmask (16 bits) with information of what bits in PV -+ that a user can change the value on using ioctl's. -+ Bit set = changeable. -+ - config ETRAX_IDE - bool "ATA/IDE support" - depends on ETRAX_ARCH_V32 -@@ -603,11 +777,11 @@ - select HOTPLUG - select PCCARD_NONSTATIC - help -- Enabled the ETRAX Carbus driver. -+ Enabled the ETRAX Carbus driver. - - config PCI - bool -- depends on ETRAX_CARDBUS -+ depends on ETRAX_CARDBUS - default y - - config ETRAX_IOP_FW_LOAD -@@ -623,3 +797,175 @@ - help - This option enables a driver for the stream co-processor - for cryptographic operations. -+ -+source drivers/mmc/Kconfig -+ -+config ETRAX_SPI_MMC -+# Make this one of several "choices" (possible simultaneously but -+# suggested uniquely) when an IOP driver emerges for "real" MMC/SD -+# protocol support. -+ tristate -+ depends on MMC -+ default MMC -+ select SPI -+ select MMC_SPI -+ select ETRAX_SPI_MMC_BOARD -+ -+# For the parts that can't be a module (due to restrictions in -+# framework elsewhere). -+config ETRAX_SPI_MMC_BOARD -+ boolean -+ default n -+ -+# While the board info is MMC_SPI only, the drivers are written to be -+# independent of MMC_SPI, so we'll keep SPI non-dependent on the -+# MMC_SPI config choices (well, except for a single depends-on-line -+# for the board-info file until a separate non-MMC SPI board file -+# emerges). -+# FIXME: When that happens, we'll need to be able to ask for and -+# configure non-MMC SPI ports together with MMC_SPI ports (if multiple -+# SPI ports are enabled). -+ -+config ETRAX_SPI_SSER0 -+ tristate "SPI using synchronous serial port 0 (sser0)" -+ depends on ETRAX_SPI_MMC -+ default m if MMC_SPI=m -+ default y if MMC_SPI=y -+ default y if MMC_SPI=n -+ select SPI_ETRAX_SSER -+ help -+ Say Y for an MMC/SD socket connected to synchronous serial port 0, -+ or for devices using the SPI protocol on that port. Say m if you -+ want to build it as a module, which will be named spi_crisv32_sser. -+ (You need to select MMC separately.) -+ -+config ETRAX_SPI_SSER0_DMA -+ bool "DMA for SPI on sser0 enabled" -+ depends on ETRAX_SPI_SSER0 -+ depends on !ETRAX_SERIAL_PORT1_DMA4_OUT && !ETRAX_SERIAL_PORT1_DMA5_IN -+ default y -+ help -+ Say Y if using DMA (dma4/dma5) for SPI on synchronous serial port 0. -+ -+config ETRAX_SPI_MMC_CD_SSER0_PIN -+ string "MMC/SD card detect pin for SPI on sser0" -+ depends on ETRAX_SPI_SSER0 && MMC_SPI -+ default "pd11" -+ help -+ The pin to use for SD/MMC card detect. This pin should be pulled up -+ and grounded when a card is present. If defined as " " (space), no -+ pin is selected. A card must then always be inserted for proper -+ action. -+ -+config ETRAX_SPI_MMC_WP_SSER0_PIN -+ string "MMC/SD card write-protect pin for SPI on sser0" -+ depends on ETRAX_SPI_SSER0 && MMC_SPI -+ default "pd10" -+ help -+ The pin to use for the SD/MMC write-protect signal for a memory -+ card. If defined as " " (space), the card is considered writable. -+ -+config ETRAX_SPI_SSER1 -+ tristate "SPI using synchronous serial port 1 (sser1)" -+ depends on ETRAX_SPI_MMC -+ default m if MMC_SPI=m && ETRAX_SPI_SSER0=n -+ default y if MMC_SPI=y && ETRAX_SPI_SSER0=n -+ default y if MMC_SPI=n && ETRAX_SPI_SSER0=n -+ select SPI_ETRAX_SSER -+ help -+ Say Y for an MMC/SD socket connected to synchronous serial port 1, -+ or for devices using the SPI protocol on that port. Say m if you -+ want to build it as a module, which will be named spi_crisv32_sser. -+ (You need to select MMC separately.) -+ -+config ETRAX_SPI_SSER1_DMA -+ bool "DMA for SPI on sser1 enabled" -+ depends on ETRAX_SPI_SSER1 && !ETRAX_ETHERNET_IFACE1 -+ depends on !ETRAX_SERIAL_PORT0_DMA6_OUT && !ETRAX_SERIAL_PORT0_DMA7_IN -+ default y -+ help -+ Say Y if using DMA (dma6/dma7) for SPI on synchronous serial port 1. -+ -+config ETRAX_SPI_MMC_CD_SSER1_PIN -+ string "MMC/SD card detect pin for SPI on sser1" -+ depends on ETRAX_SPI_SSER1 && MMC_SPI -+ default "pd12" -+ help -+ The pin to use for SD/MMC card detect. This pin should be pulled up -+ and grounded when a card is present. If defined as " " (space), no -+ pin is selected. A card must then always be inserted for proper -+ action. -+ -+config ETRAX_SPI_MMC_WP_SSER1_PIN -+ string "MMC/SD card write-protect pin for SPI on sser1" -+ depends on ETRAX_SPI_SSER1 && MMC_SPI -+ default "pd9" -+ help -+ The pin to use for the SD/MMC write-protect signal for a memory -+ card. If defined as " " (space), the card is considered writable. -+ -+config ETRAX_SPI_GPIO -+ tristate "Bitbanged SPI using gpio pins" -+ depends on ETRAX_SPI_MMC -+ select SPI_ETRAX_GPIO -+ default m if MMC_SPI=m && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n -+ default y if MMC_SPI=y && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n -+ default y if MMC_SPI=n && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n -+ help -+ Say Y for an MMC/SD socket connected to general I/O pins (but not -+ a complete synchronous serial ports), or for devices using the SPI -+ protocol on general I/O pins. Slow and slows down the system. -+ Say m to build it as a module, which will be called spi_crisv32_gpio. -+ (You need to select MMC separately.) -+ -+# The default match that of sser0, only because that's how it was tested. -+config ETRAX_SPI_CS_PIN -+ string "SPI chip select pin" -+ depends on ETRAX_SPI_GPIO -+ default "pc3" -+ help -+ The pin to use for SPI chip select. -+ -+config ETRAX_SPI_CLK_PIN -+ string "SPI clock pin" -+ depends on ETRAX_SPI_GPIO -+ default "pc1" -+ help -+ The pin to use for the SPI clock. -+ -+config ETRAX_SPI_DATAIN_PIN -+ string "SPI MISO (data in) pin" -+ depends on ETRAX_SPI_GPIO -+ default "pc16" -+ help -+ The pin to use for SPI data in from the device. -+ -+config ETRAX_SPI_DATAOUT_PIN -+ string "SPI MOSI (data out) pin" -+ depends on ETRAX_SPI_GPIO -+ default "pc0" -+ help -+ The pin to use for SPI data out to the device. -+ -+config ETRAX_SPI_MMC_CD_GPIO_PIN -+ string "MMC/SD card detect pin for SPI using gpio (space for none)" -+ depends on ETRAX_SPI_GPIO && MMC_SPI -+ default "pd11" -+ help -+ The pin to use for SD/MMC card detect. This pin should be pulled up -+ and grounded when a card is present. If defined as " " (space), no -+ pin is selected. A card must then always be inserted for proper -+ action. -+ -+config ETRAX_SPI_MMC_WP_GPIO_PIN -+ string "MMC/SD card write-protect pin for SPI using gpio (space for none)" -+ depends on ETRAX_SPI_GPIO && MMC_SPI -+ default "pd10" -+ help -+ The pin to use for the SD/MMC write-protect signal for a memory -+ card. If defined as " " (space), the card is considered writable. -+ -+# Avoid choices causing non-working configs by conditionalizing the inclusion. -+if ETRAX_SPI_MMC -+source drivers/spi/Kconfig -+endif -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Makefile 2007-01-29 16:14:16.000000000 +0100 -@@ -11,3 +11,4 @@ - obj-$(CONFIG_ETRAX_I2C) += i2c.o - obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o - obj-$(CONFIG_PCI) += pci/ -+obj-$(CONFIG_ETRAX_SPI_MMC_BOARD) += board_mmcspi.o -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/axisflashmap.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/axisflashmap.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/axisflashmap.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/axisflashmap.c 2007-02-06 17:37:50.000000000 +0100 -@@ -11,7 +11,7 @@ - * partition split defined below. - * - * Copy of os/lx25/arch/cris/arch-v10/drivers/axisflashmap.c 1.5 -- * with minor changes. -+ * with quite a few changes now. - * - */ - -@@ -27,6 +27,8 @@ - #include - #include - -+#include -+ - #include - #include - #include -@@ -37,16 +39,24 @@ - #define FLASH_UNCACHED_ADDR KSEG_E - #define FLASH_CACHED_ADDR KSEG_F - -+#define PAGESIZE (512) -+ - #if CONFIG_ETRAX_FLASH_BUSWIDTH==1 - #define flash_data __u8 - #elif CONFIG_ETRAX_FLASH_BUSWIDTH==2 - #define flash_data __u16 - #elif CONFIG_ETRAX_FLASH_BUSWIDTH==4 --#define flash_data __u16 -+#define flash_data __u32 - #endif - - /* From head.S */ --extern unsigned long romfs_start, romfs_length, romfs_in_flash; -+extern unsigned long romfs_in_flash; /* 1 when romfs_start, _length in flash */ -+extern unsigned long romfs_start, romfs_length; -+extern unsigned long nand_boot; /* 1 when booted from nand flash */ -+ -+struct partition_name { -+ char name[6]; -+}; - - /* The master mtd for the entire flash. */ - struct mtd_info* axisflash_mtd = NULL; -@@ -112,32 +122,20 @@ - .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE - }; - --/* If no partition-table was found, we use this default-set. */ --#define MAX_PARTITIONS 7 --#define NUM_DEFAULT_PARTITIONS 3 -+#define MAX_PARTITIONS 7 -+#ifdef CONFIG_ETRAX_NANDBOOT -+#define NUM_DEFAULT_PARTITIONS 4 -+#define DEFAULT_ROOTFS_PARTITION_NO 2 -+#define DEFAULT_MEDIA_SIZE 0x2000000 /* 32 megs */ -+#else -+#define NUM_DEFAULT_PARTITIONS 3 -+#define DEFAULT_ROOTFS_PARTITION_NO (-1) -+#define DEFAULT_MEDIA_SIZE 0x800000 /* 8 megs */ -+#endif - --/* -- * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the -- * size of one flash block and "filesystem"-partition needs 5 blocks to be able -- * to use JFFS. -- */ --static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { -- { -- .name = "boot firmware", -- .size = CONFIG_ETRAX_PTABLE_SECTOR, -- .offset = 0 -- }, -- { -- .name = "kernel", -- .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), -- .offset = CONFIG_ETRAX_PTABLE_SECTOR -- }, -- { -- .name = "filesystem", -- .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, -- .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) -- } --}; -+#if (MAX_PARTITIONS < NUM_DEFAULT_PARTITIONS) -+#error MAX_PARTITIONS must be >= than NUM_DEFAULT_PARTITIONS -+#endif - - /* Initialize the ones normally used. */ - static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { -@@ -178,6 +176,56 @@ - }, - }; - -+ -+/* If no partition-table was found, we use this default-set. -+ * Default flash size is 8MB (NOR). CONFIG_ETRAX_PTABLE_SECTOR is most -+ * likely the size of one flash block and "filesystem"-partition needs -+ * to be >=5 blocks to be able to use JFFS. -+ */ -+static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { -+ { -+ .name = "boot firmware", -+ .size = CONFIG_ETRAX_PTABLE_SECTOR, -+ .offset = 0 -+ }, -+ { -+ .name = "kernel", -+ .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR, -+ .offset = CONFIG_ETRAX_PTABLE_SECTOR -+ }, -+#define FILESYSTEM_SECTOR (11 * CONFIG_ETRAX_PTABLE_SECTOR) -+#ifdef CONFIG_ETRAX_NANDBOOT -+ { -+ .name = "rootfs", -+ .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR, -+ .offset = FILESYSTEM_SECTOR -+ }, -+#undef FILESYSTEM_SECTOR -+#define FILESYSTEM_SECTOR (21 * CONFIG_ETRAX_PTABLE_SECTOR) -+#endif -+ { -+ .name = "rwfs", -+ .size = DEFAULT_MEDIA_SIZE - FILESYSTEM_SECTOR, -+ .offset = FILESYSTEM_SECTOR -+ } -+}; -+ -+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE -+/* Main flash device */ -+static struct mtd_partition main_partition = { -+ .name = "main", -+ .size = 0, -+ .offset = 0 -+}; -+#endif -+ -+/* Auxilliary partition if we find another flash */ -+static struct mtd_partition aux_partition = { -+ .name = "aux", -+ .size = 0, -+ .offset = 0 -+}; -+ - /* - * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash - * chips in that order (because the amd_flash-driver is faster). -@@ -186,23 +234,23 @@ - { - struct mtd_info *mtd_cs = NULL; - -- printk(KERN_INFO -+ printk(KERN_INFO - "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", - map_cs->name, map_cs->size, map_cs->map_priv_1); - --#ifdef CONFIG_MTD_AMDSTD -- mtd_cs = do_map_probe("amd_flash", map_cs); --#endif - #ifdef CONFIG_MTD_CFI -+ mtd_cs = do_map_probe("cfi_probe", map_cs); -+#endif -+#ifdef CONFIG_MTD_JEDECPROBE - if (!mtd_cs) { -- mtd_cs = do_map_probe("cfi_probe", map_cs); -+ mtd_cs = do_map_probe("jedec_probe", map_cs); - } - #endif - - return mtd_cs; - } - --/* -+/* - * Probe each chip select individually for flash chips. If there are chips on - * both cse0 and cse1, the mtd_info structs will be concatenated to one struct - * so that MTD partitions can cross chip boundries. -@@ -217,22 +265,17 @@ - { - struct mtd_info *mtd_cse0; - struct mtd_info *mtd_cse1; -- struct mtd_info *mtd_nand = NULL; - struct mtd_info *mtd_total; -- struct mtd_info *mtds[3]; -+ struct mtd_info *mtds[2]; - int count = 0; - - if ((mtd_cse0 = probe_cs(&map_cse0)) != NULL) - mtds[count++] = mtd_cse0; - if ((mtd_cse1 = probe_cs(&map_cse1)) != NULL) - mtds[count++] = mtd_cse1; -+ - --#ifdef CONFIG_ETRAX_NANDFLASH -- if ((mtd_nand = crisv32_nand_flash_probe()) != NULL) -- mtds[count++] = mtd_nand; --#endif -- -- if (!mtd_cse0 && !mtd_cse1 && !mtd_nand) { -+ if (!mtd_cse0 && !mtd_cse1) { - /* No chip found. */ - return NULL; - } -@@ -248,7 +291,7 @@ - */ - mtd_total = mtd_concat_create(mtds, - count, -- "cse0+cse1+nand"); -+ "cse0+cse1"); - #else - printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel " - "(mis)configuration!\n", map_cse0.name, map_cse1.name); -@@ -260,57 +303,155 @@ - - /* The best we can do now is to only use what we found - * at cse0. -- */ -+ */ - mtd_total = mtd_cse0; - map_destroy(mtd_cse1); - } - } else { -- mtd_total = mtd_cse0? mtd_cse0 : mtd_cse1 ? mtd_cse1 : mtd_nand; -- -+ mtd_total = mtd_cse0 ? mtd_cse0 : mtd_cse1; -+ - } - - return mtd_total; - } - --extern unsigned long crisv32_nand_boot; --extern unsigned long crisv32_nand_cramfs_offset; -- - /* - * Probe the flash chip(s) and, if it succeeds, read the partition-table - * and register the partitions with MTD. - */ - static int __init init_axis_flash(void) - { -- struct mtd_info *mymtd; -+ struct mtd_info *main_mtd; -+ struct mtd_info *aux_mtd = NULL; - int err = 0; - int pidx = 0; - struct partitiontable_head *ptable_head = NULL; - struct partitiontable_entry *ptable; -- int use_default_ptable = 1; /* Until proven otherwise. */ -- const char *pmsg = KERN_INFO " /dev/flash%d at 0x%08x, size 0x%08x\n"; -- static char page[512]; -+ int ptable_ok = 0; -+ static char page[PAGESIZE]; - size_t len; -+ int ram_rootfs_partition = -1; /* -1 => no RAM rootfs partition */ -+ int part; -+ -+ /* We need a root fs. If it resides in RAM, we need to use an -+ * MTDRAM device, so it must be enabled in the kernel config, -+ * but its size must be configured as 0 so as not to conflict -+ * with our usage. -+ */ -+#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) -+ if (!romfs_in_flash && !nand_boot) { -+ printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " -+ "device; configure CONFIG_MTD_MTDRAM with size = 0!\n"); -+ panic("This kernel cannot boot from RAM!\n"); -+ } -+#endif - - #ifndef CONFIG_ETRAXFS_SIM -- mymtd = flash_probe(); -- mymtd->read(mymtd, CONFIG_ETRAX_PTABLE_SECTOR, 512, &len, page); -- ptable_head = (struct partitiontable_head *)(page + PARTITION_TABLE_OFFSET); -+ main_mtd = flash_probe(); -+ if (main_mtd) -+ printk(KERN_INFO "%s: 0x%08x bytes of NOR flash memory.\n", -+ main_mtd->name, main_mtd->size); -+ -+#ifdef CONFIG_ETRAX_NANDFLASH -+ aux_mtd = crisv32_nand_flash_probe(); -+ if (aux_mtd) -+ printk(KERN_INFO "%s: 0x%08x bytes of NAND flash memory.\n", -+ aux_mtd->name, aux_mtd->size); - -- if (!mymtd) { -+#ifdef CONFIG_ETRAX_NANDBOOT -+ { -+ struct mtd_info *tmp_mtd; -+ -+ printk(KERN_INFO "axisflashmap: Set to boot from NAND flash, " -+ "making NAND flash primary device.\n"); -+ tmp_mtd = main_mtd; -+ main_mtd = aux_mtd; -+ aux_mtd = tmp_mtd; -+ } -+#endif /* CONFIG_ETRAX_NANDBOOT */ -+#endif /* CONFIG_ETRAX_NANDFLASH */ -+ -+ if (!main_mtd && !aux_mtd) { - /* There's no reason to use this module if no flash chip can - * be identified. Make sure that's understood. - */ - printk(KERN_INFO "axisflashmap: Found no flash chip.\n"); -- } else { -- printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n", -- mymtd->name, mymtd->size); -- axisflash_mtd = mymtd; - } - -- if (mymtd) { -- mymtd->owner = THIS_MODULE; -+#if 0 /* Dump flash memory so we can see what is going on */ -+ if (main_mtd) { -+ int sectoraddr, i; -+ for (sectoraddr = 0; sectoraddr < 2*65536+4096; sectoraddr += PAGESIZE) { -+ main_mtd->read(main_mtd, sectoraddr, PAGESIZE, &len, page); -+ printk(KERN_INFO -+ "Sector at %d (length %d):\n", -+ sectoraddr, len); -+ for (i = 0; i < PAGESIZE; i += 16) { -+ printk(KERN_INFO -+ "%02x %02x %02x %02x %02x %02x %02x %02x " -+ "%02x %02x %02x %02x %02x %02x %02x %02x\n", -+ page[i] & 255, page[i+1] & 255, -+ page[i+2] & 255, page[i+3] & 255, -+ page[i+4] & 255, page[i+5] & 255, -+ page[i+6] & 255, page[i+7] & 255, -+ page[i+8] & 255, page[i+9] & 255, -+ page[i+10] & 255, page[i+11] & 255, -+ page[i+12] & 255, page[i+13] & 255, -+ page[i+14] & 255, page[i+15] & 255); -+ } -+ -+ } -+ } -+#endif -+ -+ if (main_mtd) { -+ main_mtd->owner = THIS_MODULE; -+ axisflash_mtd = main_mtd; -+ -+ loff_t ptable_sector = CONFIG_ETRAX_PTABLE_SECTOR; -+ -+ pidx++; /* First partition (rescue) is always set to the default. */ -+#ifdef CONFIG_ETRAX_NANDBOOT -+ /* We know where the partition table should be located, -+ * it will be in first good block after that. -+ */ -+ int blockstat; -+ do { -+ blockstat = main_mtd->block_isbad(main_mtd, ptable_sector); -+ if (blockstat < 0) -+ ptable_sector = 0; /* read error */ -+ else if (blockstat) -+ ptable_sector += main_mtd->erasesize; -+ } while (blockstat && ptable_sector); -+#endif -+ if (ptable_sector) { -+ main_mtd->read(main_mtd, ptable_sector, PAGESIZE, &len, page); -+ ptable_head = &((struct partitiontable *) page)->head; -+ } -+ -+#if 0 /* Dump partition table so we can see what is going on */ -+ printk(KERN_INFO -+ "axisflashmap: flash read %d bytes at 0x%08x, data: " -+ "%02x %02x %02x %02x %02x %02x %02x %02x\n", -+ len, CONFIG_ETRAX_PTABLE_SECTOR, -+ page[0] & 255, page[1] & 255, -+ page[2] & 255, page[3] & 255, -+ page[4] & 255, page[5] & 255, -+ page[6] & 255, page[7] & 255); -+ printk(KERN_INFO -+ "axisflashmap: partition table offset %d, data: " -+ "%02x %02x %02x %02x %02x %02x %02x %02x\n", -+ PARTITION_TABLE_OFFSET, -+ page[PARTITION_TABLE_OFFSET+0] & 255, -+ page[PARTITION_TABLE_OFFSET+1] & 255, -+ page[PARTITION_TABLE_OFFSET+2] & 255, -+ page[PARTITION_TABLE_OFFSET+3] & 255, -+ page[PARTITION_TABLE_OFFSET+4] & 255, -+ page[PARTITION_TABLE_OFFSET+5] & 255, -+ page[PARTITION_TABLE_OFFSET+6] & 255, -+ page[PARTITION_TABLE_OFFSET+7] & 255); -+#endif - } -- pidx++; /* First partition is always set to the default. */ - - if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC) - && (ptable_head->size < -@@ -323,7 +464,6 @@ - /* Looks like a start, sane length and end of a - * partition table, lets check csum etc. - */ -- int ptable_ok = 0; - struct partitiontable_entry *max_addr = - (struct partitiontable_entry *) - ((unsigned long)ptable_head + sizeof(*ptable_head) + -@@ -331,7 +471,7 @@ - unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR; - unsigned char *p; - unsigned long csum = 0; -- -+ - ptable = (struct partitiontable_entry *) - ((unsigned long)ptable_head + sizeof(*ptable_head)); - -@@ -343,108 +483,177 @@ - csum += *p++; - csum += *p++; - csum += *p++; -- } -+ } - ptable_ok = (csum == ptable_head->checksum); - - /* Read the entries and use/show the info. */ -- printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n", -+ printk(KERN_INFO "axisflashmap: " -+ "Found a%s partition table at 0x%p-0x%p.\n", - (ptable_ok ? " valid" : "n invalid"), ptable_head, - max_addr); - - /* We have found a working bootblock. Now read the -- * partition table. Scan the table. It ends when -- * there is 0xffffffff, that is, empty flash. -+ * partition table. Scan the table. It ends with 0xffffffff. - */ - while (ptable_ok -- && ptable->offset != 0xffffffff -+ && ptable->offset != PARTITIONTABLE_END_MARKER - && ptable < max_addr -- && pidx < MAX_PARTITIONS) { -+ && pidx < MAX_PARTITIONS - 1) { - -- axis_partitions[pidx].offset = offset + ptable->offset + (crisv32_nand_boot ? 16384 : 0); -- axis_partitions[pidx].size = ptable->size; -- -- printk(pmsg, pidx, axis_partitions[pidx].offset, -- axis_partitions[pidx].size); -+ axis_partitions[pidx].offset = offset + ptable->offset; -+#ifdef CONFIG_ETRAX_NANDFLASH -+ if (main_mtd->type == MTD_NANDFLASH) { -+ axis_partitions[pidx].size = -+ (((ptable+1)->offset == -+ PARTITIONTABLE_END_MARKER) ? -+ main_mtd->size : -+ ((ptable+1)->offset + offset)) - -+ (ptable->offset + offset); -+ -+ } else -+#endif /* CONFIG_ETRAX_NANDFLASH */ -+ axis_partitions[pidx].size = ptable->size; -+#ifdef CONFIG_ETRAX_NANDBOOT -+ /* Save partition number of jffs2 ro partition. -+ * Needed if RAM booting or root file system in RAM. -+ */ -+ if (!nand_boot && -+ ram_rootfs_partition < 0 && /* not already set */ -+ ptable->type == PARTITION_TYPE_JFFS2 && -+ (ptable->flags & PARTITION_FLAGS_READONLY_MASK) == -+ PARTITION_FLAGS_READONLY) -+ ram_rootfs_partition = pidx; -+#endif /* CONFIG_ETRAX_NANDBOOT */ - pidx++; - ptable++; - } -- use_default_ptable = !ptable_ok; - } - -- if (romfs_in_flash) { -- /* Add an overlapping device for the root partition (romfs). */ -+ /* Decide whether to use default partition table. */ -+ /* Only use default table if we actually have a device (main_mtd) */ - -- axis_partitions[pidx].name = "romfs"; -- if (crisv32_nand_boot) { -- char* data = kmalloc(1024, GFP_KERNEL); -- int len; -- int offset = crisv32_nand_cramfs_offset & ~(1024-1); -- char* tmp; -- -- mymtd->read(mymtd, offset, 1024, &len, data); -- tmp = &data[crisv32_nand_cramfs_offset % 512]; -- axis_partitions[pidx].size = *(unsigned*)(tmp + 4); -- axis_partitions[pidx].offset = crisv32_nand_cramfs_offset; -- kfree(data); -- } else { -- axis_partitions[pidx].size = romfs_length; -- axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; -- } -+ struct mtd_partition *partition = &axis_partitions[0]; -+ if (main_mtd && !ptable_ok) { -+ memcpy(axis_partitions, axis_default_partitions, -+ sizeof(axis_default_partitions)); -+ pidx = NUM_DEFAULT_PARTITIONS; -+ ram_rootfs_partition = DEFAULT_ROOTFS_PARTITION_NO; -+ } - -+ /* Add artificial partitions for rootfs if necessary */ -+ if (romfs_in_flash) { -+ /* rootfs is in directly accessible flash memory = NOR flash. -+ Add an overlapping device for the rootfs partition. */ -+ printk(KERN_INFO "axisflashmap: Adding partition for " -+ "overlapping root file system image\n"); -+ axis_partitions[pidx].size = romfs_length; -+ axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; -+ axis_partitions[pidx].name = "romfs"; - axis_partitions[pidx].mask_flags |= MTD_WRITEABLE; -- -- printk(KERN_INFO -- " Adding readonly flash partition for romfs image:\n"); -- printk(pmsg, pidx, axis_partitions[pidx].offset, -- axis_partitions[pidx].size); -+ ram_rootfs_partition = -1; - pidx++; - } -- -- if (mymtd) { -- if (use_default_ptable) { -- printk(KERN_INFO " Using default partition table.\n"); -- err = add_mtd_partitions(mymtd, axis_default_partitions, -- NUM_DEFAULT_PARTITIONS); -- } else { -- err = add_mtd_partitions(mymtd, axis_partitions, pidx); -+ else if (romfs_length && !nand_boot) { -+ /* romfs exists in memory, but not in flash, so must be in RAM. -+ * Configure an MTDRAM partition. */ -+ if (ram_rootfs_partition < 0) { /* none set yet */ -+ ram_rootfs_partition = pidx; /* put it at the end */ -+ pidx++; - } -+ printk(KERN_INFO "axisflashmap: Adding partition for " -+ "root file system image in RAM\n"); -+ axis_partitions[ram_rootfs_partition].size = romfs_length; -+ axis_partitions[ram_rootfs_partition].offset = romfs_start; -+ axis_partitions[ram_rootfs_partition].name = "romfs"; -+ axis_partitions[ram_rootfs_partition].mask_flags |= -+ MTD_WRITEABLE; -+ } - -- if (err) { -- panic("axisflashmap could not add MTD partitions!\n"); -- } -+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE -+ if (main_mtd) { -+ main_partition.size = main_mtd->size; -+ err = add_mtd_partitions(main_mtd, &main_partition, 1); -+ if (err) -+ panic("axisflashmap: Could not initialize " -+ "partition for whole main mtd device!\n"); - } --/* CONFIG_EXTRAXFS_SIM */ - #endif - -- if (!romfs_in_flash) { -- /* Create an RAM device for the root partition (romfs). */ -+ /* Now, register all partitions with mtd. -+ * We do this one at a time so we can slip in an MTDRAM device -+ * in the proper place if required. */ -+ -+ for (part = 0; part < pidx; part++) { -+ if (part == ram_rootfs_partition) { -+ /* add MTDRAM partition here */ -+ struct mtd_info *mtd_ram; -+ -+ mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); -+ if (!mtd_ram) -+ panic("axisflashmap: Couldn't allocate memory " -+ "for mtd_info!\n"); -+ printk(KERN_INFO "axisflashmap: Adding RAM partition " -+ "for rootfs image.\n"); -+ err = mtdram_init_device(mtd_ram, -+ (void *)partition[part].offset, -+ partition[part].size, -+ partition[part].name); -+ if (err) -+ panic("axisflashmap: Could not initialize " -+ "MTD RAM device!\n"); -+ /* JFFS2 likes to have an erasesize. Keep potential -+ * JFFS2 rootfs happy by providing one. Since image -+ * was most likely created for main mtd, use that -+ * erasesize, if available. Otherwise, make a guess. */ -+ mtd_ram->erasesize = (main_mtd ? main_mtd->erasesize : -+ CONFIG_ETRAX_PTABLE_SECTOR); -+ } else { -+ err = add_mtd_partitions(main_mtd, -+ &partition[part], 1); -+ if (err) -+ panic("axisflashmap: Could not add mtd " -+ "partition %d\n", part); -+ } -+ } - --#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) -- /* No use trying to boot this kernel from RAM. Panic! */ -- printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " -- "device due to kernel (mis)configuration!\n"); -- panic("This kernel cannot boot from RAM!\n"); --#else -- struct mtd_info *mtd_ram; -+#endif /* CONFIG_EXTRAXFS_SIM */ - -- mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info), -- GFP_KERNEL); -- if (!mtd_ram) { -- panic("axisflashmap couldn't allocate memory for " -- "mtd_info!\n"); -- } -+#ifdef CONFIG_ETRAXFS_SIM -+ /* For simulator, always use a RAM partition. -+ * The rootfs will be found after the kernel in RAM, -+ * with romfs_start and romfs_end indicating location and size. -+ */ -+ struct mtd_info *mtd_ram; -+ -+ mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info), -+ GFP_KERNEL); -+ if (!mtd_ram) { -+ panic("axisflashmap: Couldn't allocate memory for " -+ "mtd_info!\n"); -+ } - -- printk(KERN_INFO " Adding RAM partition for romfs image:\n"); -- printk(pmsg, pidx, romfs_start, romfs_length); -+ printk(KERN_INFO "axisflashmap: Adding RAM partition for romfs, " -+ "at %u, size %u\n", -+ (unsigned) romfs_start, (unsigned) romfs_length); -+ -+ err = mtdram_init_device(mtd_ram, (void*)romfs_start, -+ romfs_length, "romfs"); -+ if (err) { -+ panic("axisflashmap: Could not initialize MTD RAM " -+ "device!\n"); -+ } -+#endif /* CONFIG_EXTRAXFS_SIM */ -+ -+#ifndef CONFIG_ETRAXFS_SIM -+ if (aux_mtd) { -+ aux_partition.size = aux_mtd->size; -+ err = add_mtd_partitions(aux_mtd, &aux_partition, 1); -+ if (err) -+ panic("axisflashmap: Could not initialize " -+ "aux mtd device!\n"); - -- err = mtdram_init_device(mtd_ram, (void*)romfs_start, -- romfs_length, "romfs"); -- if (err) { -- panic("axisflashmap could not initialize MTD RAM " -- "device!\n"); -- } --#endif - } -+#endif /* CONFIG_EXTRAXFS_SIM */ - - return err; - } -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/board_mmcspi.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/board_mmcspi.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/board_mmcspi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/board_mmcspi.c 2007-01-29 15:51:19.000000000 +0100 -@@ -0,0 +1,686 @@ -+/* -+ * Somewhat generic "board-side" code to support SPI drivers for chips -+ * with a CRIS v32 and later. Not really board-specific, and only for -+ * registration of SPI devices for MMC, hence the "mmcspi" part of the -+ * name instead of a proper board name. -+ * -+ * Copyright (c) 2007 Axis Communications AB -+ * -+ * TODO: SDIO interrupt-pin support (though can't be done until -+ * there's support added in both the mmc_spi and the mmc frameworks). -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* We need some housekeeping. */ -+#define CONCAT_(a, b) a ## b -+#define CONCAT(a, b) CONCAT_(a, b) -+#define CONCAT3(a, b, c) CONCAT(CONCAT(a, b), c) -+ -+/* Grr. Why not define them as usual in autoconf, #ifdef REVEAL_MODULES? */ -+#if !defined(CONFIG_SPI_ETRAX_SSER) && defined(CONFIG_SPI_ETRAX_SSER_MODULE) -+#define CONFIG_SPI_ETRAX_SSER -+#endif -+ -+#if !defined(CONFIG_ETRAX_SPI_SSER0) && defined(CONFIG_ETRAX_SPI_SSER0_MODULE) -+#define CONFIG_ETRAX_SPI_SSER0 -+#endif -+ -+#if !defined(CONFIG_ETRAX_SPI_SSER1) && defined(CONFIG_ETRAX_SPI_SSER1_MODULE) -+#define CONFIG_ETRAX_SPI_SSER1 -+#endif -+ -+#if !defined(CONFIG_SPI_ETRAX_GPIO) && defined(CONFIG_SPI_ETRAX_GPIO_MODULE) -+#define CONFIG_SPI_ETRAX_GPIO -+#endif -+ -+#define CONFIGURED_PIN(x) ((x) != NULL && *(x) != 0 && *(x) != ' ') -+ -+/* Helper function to configure an iopin for input. */ -+ -+static int crisv32_config_pin_in(struct crisv32_iopin *pin, const char *name) -+{ -+ int ret = crisv32_io_get_name(pin, name); -+ if (ret) -+ return ret; -+ -+ crisv32_io_set_dir(pin, crisv32_io_dir_in); -+ return 0; -+} -+ -+/* -+ * Writable data pointed to by the constant parts of each MMC_SPI bus -+ * interface. Should only hold MMC-specific state (for the -+ * MMC-specific pins), nothing SPI-generic. -+ */ -+ -+struct crisv32_mmc_spi_pinstate { -+ struct crisv32_iopin write_protect_pin; -+ struct crisv32_iopin card_detect_pin; -+ -+ /* We must poll for card-detect, which we do each: */ -+#define CARD_DETECT_CHECK_INTERVAL (2*HZ) -+ /* We poll using a self-arming workqueue function. */ -+ struct work_struct cd_work; -+ -+ /* When we detect a change in card presence, we call this -+ * function, supplied by the mmc_spi framework: */ -+ irqreturn_t (*detectfunc)(int, void *); -+ -+ /* -+ * We call that function with this parameter as the second -+ * one. We must assume the other parameters are unused, as we -+ * don't have an interrupt context. -+ */ -+ void *detectfunc_param2; -+ -+ /* State for the card-detect worker. */ -+ int card_present; -+}; -+ -+/* Rearming "work" function for card-detect polling. */ -+ -+static void crisv32_cd_worker(void *x) -+{ -+ struct crisv32_mmc_spi_pinstate *state = x; -+ -+ /* It's a pull-up, so a card is present when 0. */ -+ int card_present = crisv32_io_rd(&state->card_detect_pin) == 0; -+ -+ if (card_present != state->card_present) { -+ state->card_present = card_present; -+ state->detectfunc(0, state->detectfunc_param2); -+ } -+ schedule_delayed_work(&state->cd_work, CARD_DETECT_CHECK_INTERVAL); -+} -+ -+/* The parts of MMC-specific configuration common to GPIO and SSER. */ -+ -+static int crisv32_mmcspi_config_common(struct spi_device *spidev, -+ irqreturn_t (*intfunc)(int, void *), -+ struct mmc_host *mmc_host, -+ const struct crisv32_mmc_spi_pindata *pd) -+{ -+ int ret = 0; -+ struct crisv32_mmc_spi_pinstate *ps = pd->pinstate; -+ -+ /* -+ * If we don't have a card-detect pin, the card must be -+ * present at startup (including insmod/modprobe). No -+ * re-scans are done if no card is present at that time. -+ */ -+ if (CONFIGURED_PIN(pd->card_detect)) { -+ ret = crisv32_config_pin_in(&ps->card_detect_pin, -+ pd->card_detect); -+ -+ if (ret != 0) -+ goto bad_card_detect; -+ -+ /* Need to cast away const from pd, unfortunately. */ -+ INIT_WORK(&ps->cd_work, crisv32_cd_worker, (void *) ps); -+ ps->card_present = 1; -+ ps->detectfunc = intfunc; -+ ps->detectfunc_param2 = mmc_host; -+ crisv32_cd_worker(ps); -+ } else -+ ps->detectfunc = NULL; -+ -+ /* -+ * We set up for checking for presence of a write-protect pin -+ * as pin.port being non-NULL. -+ */ -+ memset(&ps->write_protect_pin, 0, sizeof ps->write_protect_pin); -+ if (CONFIGURED_PIN(pd->write_protect)) { -+ ret = crisv32_config_pin_in(&ps->write_protect_pin, -+ pd->write_protect); -+ -+ if (ret != 0) -+ goto bad_write_protect; -+ } -+ -+ return 0; -+ -+ bad_write_protect: -+ if (ps->detectfunc) { -+ cancel_rearming_delayed_work(&ps->cd_work); -+ ps->detectfunc = NULL; -+ } -+ -+ bad_card_detect: -+ return ret; -+} -+ -+/* A function to undo crisv32_mmcspi_config_common. */ -+ -+static void crisv32_mmcspi_deconfig_common(const struct -+ crisv32_mmc_spi_pindata *pd) -+{ -+ if (pd->pinstate->detectfunc) { -+ cancel_rearming_delayed_work(&pd->pinstate->cd_work); -+ pd->pinstate->detectfunc = NULL; -+ } -+ -+ /* We don't have to undo the pin allocations, being GPIO. */ -+} -+ -+/* Helper function for write-protect sense. */ -+ -+static int crisv32_mmcspi_get_ro_helper(struct crisv32_mmc_spi_pinstate *ps) -+{ -+ return ps->write_protect_pin.port != NULL -+ && crisv32_io_rd(&ps->write_protect_pin) != 0; -+} -+ -+/* The hardware-interface-specific SPI+MMC parts. */ -+ -+#ifdef CONFIG_SPI_ETRAX_SSER -+static const char crisv32_matching_spi_sser_driver_name[] __init_or_module -+ = "spi_crisv32_sser"; -+ -+/* -+ * Make up something we can use in tables and function without -+ * #ifdef-cluttering. -+ */ -+#ifdef CONFIG_ETRAX_SPI_SSER0_DMA -+#define WITH_ETRAX_SPI_SSER0_DMA 1 -+#else -+#define WITH_ETRAX_SPI_SSER0_DMA 0 -+#endif -+#ifdef CONFIG_ETRAX_SPI_SSER1_DMA -+#define WITH_ETRAX_SPI_SSER1_DMA 1 -+#else -+#define WITH_ETRAX_SPI_SSER1_DMA 0 -+#endif -+ -+/* Write-protect sense for the SSER interface. */ -+ -+static int crisv32_mmcspi_sser_get_ro(struct device *dev) -+{ -+ struct spi_device *spidev = to_spi_device(dev); -+ struct crisv32_mmc_spi_sser_hwdata *sser_defs -+ = spidev->controller_data; -+ struct crisv32_mmc_spi_pindata *pd = &sser_defs->mmc; -+ return crisv32_mmcspi_get_ro_helper(pd->pinstate); -+} -+ -+/* Initialize the MMC-specific parts of the MMC+SPI interface, SSER. */ -+ -+static int crisv32_mmcspi_sser_init(struct device *dev, -+ irqreturn_t (*intfunc)(int, void *), -+ void *xmmc_host) -+{ -+ struct mmc_host *mmc_host = xmmc_host; -+ struct spi_device *spidev = to_spi_device(dev); -+ struct crisv32_mmc_spi_sser_hwdata *sser_defs -+ = spidev->controller_data; -+ int ret = crisv32_mmcspi_config_common(spidev, intfunc, mmc_host, -+ &sser_defs->mmc); -+ if (ret != 0) -+ return ret; -+ -+ mmc_host->f_max = spidev->max_speed_hz; -+ -+ /* -+ * Let's just set this to ceil(100e6/65536). It wouldn't be -+ * hard to change the base frequency to support down to 450Hz, -+ * but there's no apparent requirement from known hardware. -+ * Would also require adjustments to the SPI code, not just -+ * here. -+ * -+ * On second thought, let's not set f_min unconditionally, as -+ * mmc doesn't treat it as a limit, but as the frequency to -+ * use at initialization. We stick with what mmc_spi sets, if -+ * it fits. -+ */ -+ if (mmc_host->f_min < 1526) -+ mmc_host->f_min = 1526; -+ -+ dev_info(dev, "CRIS v32 mmc_spi support hooked to SPI on sser%d" -+ " (cd: %s, wp: %s)\n", -+ spidev->master->bus_num, -+ CONFIGURED_PIN(sser_defs->mmc.card_detect) -+ ? sser_defs->mmc.card_detect : "(none)", -+ CONFIGURED_PIN(sser_defs->mmc.write_protect) -+ ? sser_defs->mmc.write_protect : "(none)"); -+ return 0; -+} -+ -+/* Similarly, to undo crisv32_mmcspi_sser_init. */ -+ -+static void crisv32_mmcspi_sser_exit(struct device *dev, void *xmmc_host) -+{ -+ struct spi_device *spidev = to_spi_device(dev); -+ struct crisv32_mmc_spi_sser_hwdata *sser_defs -+ = spidev->controller_data; -+ -+ crisv32_mmcspi_deconfig_common(&sser_defs->mmc); -+} -+ -+/* -+ * Connect sser and DMA channels and return the proper numbers to use. -+ * -+ * This function exists really only to avoid having the following constants -+ * tabled: regi_sserN, SSERn_INTR_VECT, pinmux_sserN, SYNC_SERn_TX_DMA_NBR, -+ * SYNC_SERn_RX_DMA_NBR dma_sserN, regi_dmaM, regi_dmaN, DMAm_INTR_VECT, -+ * DMAn_INTR_VECT. I might have missed some. :-) -+ */ -+static int crisv32_allocate_sser(struct crisv32_regi_n_int *sserp, -+ struct crisv32_regi_n_int *dmainp, -+ struct crisv32_regi_n_int *dmaoutp, -+ u32 sserno) -+{ -+ int ret; -+ u32 regi_sser = sserno == 0 ? regi_sser0 : regi_sser1; -+ u32 sser_irq = sserno == 0 ? SSER0_INTR_VECT : SSER1_INTR_VECT; -+ BUG_ON(sserno > 1 || sserp == NULL); -+ -+ ret = crisv32_pinmux_alloc_fixed(sserno == 0 -+ ? pinmux_sser0 : pinmux_sser1); -+ if (ret != 0) -+ return ret; -+ -+ sserp->regi = regi_sser; -+ sserp->irq = sser_irq; -+ -+ if (dmaoutp) { -+ crisv32_request_dma(sserno == 0 -+ ? SYNC_SER0_TX_DMA_NBR -+ : SYNC_SER1_TX_DMA_NBR, -+ "SD/MMC SPI dma tr", -+ DMA_VERBOSE_ON_ERROR | DMA_PANIC_ON_ERROR, -+ /* Let's be brave and ask for the -+ max. Except it's simplex, so -+ let's request half the max -+ speed in either direction. */ -+ 50 * 1000 * 1000 / 8 / 2, -+ sserno == 0 ? dma_sser0 : dma_sser1); -+ dmaoutp->regi = sserno == 0 -+ ? CONCAT(regi_dma, SYNC_SER0_TX_DMA_NBR) -+ : CONCAT(regi_dma, SYNC_SER1_TX_DMA_NBR); -+ dmaoutp->irq = sserno == 0 -+ ? CONCAT3(DMA, SYNC_SER0_TX_DMA_NBR, _INTR_VECT) -+ : CONCAT3(DMA, SYNC_SER1_TX_DMA_NBR, _INTR_VECT); -+ } -+ -+ if (dmainp) { -+ crisv32_request_dma(sserno == 0 -+ ? SYNC_SER0_RX_DMA_NBR -+ : SYNC_SER1_RX_DMA_NBR, -+ "SD/MMC SPI dma rec", -+ DMA_VERBOSE_ON_ERROR | DMA_PANIC_ON_ERROR, -+ 50 * 1000 * 1000 / 8 / 2, -+ sserno == 0 ? dma_sser0 : dma_sser1); -+ dmainp->regi = sserno == 0 -+ ? CONCAT(regi_dma, SYNC_SER0_RX_DMA_NBR) -+ : CONCAT(regi_dma, SYNC_SER1_RX_DMA_NBR); -+ dmainp->irq = sserno == 0 -+ ? CONCAT3(DMA, SYNC_SER0_RX_DMA_NBR, _INTR_VECT) -+ : CONCAT3(DMA, SYNC_SER1_RX_DMA_NBR, _INTR_VECT); -+ } -+ -+ return 0; -+} -+ -+/* Undo whatever allocations et. al. that crisv32_allocate_sser did. */ -+ -+static void crisv32_free_sser(u32 sserno, int with_dma) -+{ -+ int ret; -+ -+ if (with_dma) { -+ crisv32_free_dma(sserno == 0 -+ ? SYNC_SER0_RX_DMA_NBR -+ : SYNC_SER1_RX_DMA_NBR); -+ crisv32_free_dma(sserno == 0 -+ ? SYNC_SER0_TX_DMA_NBR -+ : SYNC_SER1_TX_DMA_NBR); -+ } -+ -+ ret = crisv32_pinmux_dealloc_fixed(sserno == 0 -+ ? pinmux_sser0 : pinmux_sser1); -+ -+ if (ret != 0) -+ panic("%s: crisv32_pinmux_dealloc_fixed returned %d\n", -+ __FUNCTION__, ret); -+} -+ -+/* Convenience-macro to avoid typos causing diffs between sser ports. */ -+ -+#define SSER_CDATA(n) \ -+ { \ -+ { \ -+ .using_dma = WITH_ETRAX_SPI_SSER##n##_DMA, \ -+ .iface_allocate = crisv32_allocate_sser##n, \ -+ .iface_free = crisv32_free_sser##n \ -+ }, \ -+ { \ -+ .card_detect \ -+ = CONFIG_ETRAX_SPI_MMC_CD_SSER##n##_PIN,\ -+ .write_protect \ -+ = CONFIG_ETRAX_SPI_MMC_WP_SSER##n##_PIN,\ -+ .pinstate \ -+ = &crisv32_mmcspi_sser##n##_pinstate \ -+ } \ -+ } -+ -+#ifdef CONFIG_ETRAX_SPI_SSER0 -+ -+/* Allocate hardware to go with sser0 and fill in the right numbers. */ -+ -+static int crisv32_allocate_sser0(struct crisv32_regi_n_int *sserp, -+ struct crisv32_regi_n_int *dmainp, -+ struct crisv32_regi_n_int *dmaoutp) -+{ -+ return crisv32_allocate_sser(sserp, dmainp, dmaoutp, 0); -+} -+ -+/* Undo those allocations. */ -+ -+static void crisv32_free_sser0(void) -+{ -+ crisv32_free_sser(0, WITH_ETRAX_SPI_SSER0_DMA); -+} -+ -+static struct crisv32_mmc_spi_pinstate crisv32_mmcspi_sser0_pinstate; -+static const struct crisv32_mmc_spi_sser_hwdata crisv32_mmcspi_sser0_cdata -+ = SSER_CDATA(0); -+#endif /* CONFIG_ETRAX_SPI_SSER0 */ -+ -+#ifdef CONFIG_ETRAX_SPI_SSER1 -+ -+/* Allocate hardware to go with sser0 and fill in the right numbers. */ -+ -+static int crisv32_allocate_sser1(struct crisv32_regi_n_int *sserp, -+ struct crisv32_regi_n_int *dmainp, -+ struct crisv32_regi_n_int *dmaoutp) -+{ -+ return crisv32_allocate_sser(sserp, dmainp, dmaoutp, 1); -+} -+ -+/* Undo those allocations. */ -+ -+static void crisv32_free_sser1(void) -+{ -+ crisv32_free_sser(1, WITH_ETRAX_SPI_SSER1_DMA); -+} -+ -+static struct crisv32_mmc_spi_pinstate crisv32_mmcspi_sser1_pinstate; -+static const struct crisv32_mmc_spi_sser_hwdata crisv32_mmcspi_sser1_cdata -+ = SSER_CDATA(1); -+ -+#endif /* CONFIG_ETRAX_SPI_SSER1 */ -+ -+static struct mmc_spi_platform_data crisv32_mmcspi_sser_pdata = { -+ .init = crisv32_mmcspi_sser_init, -+ .exit = __devexit_p(crisv32_mmcspi_sser_exit), -+ .detect_delay = 0, -+ .get_ro = crisv32_mmcspi_sser_get_ro, -+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, -+ .setpower = NULL -+}; -+ -+#endif /* CONFIG_SPI_ETRAX_SSER */ -+ -+#ifdef CONFIG_SPI_ETRAX_GPIO -+ -+static const char crisv32_matching_spi_gpio_driver_name[] __init_or_module -+ = "spi_crisv32_gpio"; -+ -+/* Write-protect sense for the GPIO interface. */ -+ -+static int crisv32_mmcspi_gpio_get_ro(struct device *dev) -+{ -+ struct spi_device *spidev = to_spi_device(dev); -+ struct crisv32_mmc_spi_gpio_hwdata *gpio_defs -+ = spidev->controller_data; -+ struct crisv32_mmc_spi_pindata *pd = &gpio_defs->mmc; -+ -+ return crisv32_mmcspi_get_ro_helper(pd->pinstate); -+} -+ -+/* Initialize the MMC-specific parts of the MMC+SPI interface, GPIO. */ -+ -+static int crisv32_mmcspi_gpio_init(struct device *dev, -+ irqreturn_t (*intfunc)(int, void *), -+ void *xmmc_host) -+{ -+ struct mmc_host *mmc_host = xmmc_host; -+ struct spi_device *spidev = to_spi_device(dev); -+ struct crisv32_mmc_spi_gpio_hwdata *gpio_defs -+ = spidev->controller_data; -+ int ret = crisv32_mmcspi_config_common(spidev, intfunc, mmc_host, -+ &gpio_defs->mmc); -+ if (ret) -+ return ret; -+ -+ mmc_host->f_max = spidev->max_speed_hz; -+ -+ /* -+ * We don't set f_min, as the mmc code doesn't treat it as a -+ * limit, but as the frequency to use at initialization. We -+ * stick with what mmc_spi sets. -+ */ -+ dev_info(dev, "CRIS v32 mmc_spi support hooked to SPI on GPIO" -+ " (bus #%d, cd: %s, wp: %s)\n", -+ spidev->master->bus_num, -+ CONFIGURED_PIN(gpio_defs->mmc.card_detect) -+ ? gpio_defs->mmc.card_detect : "(none)", -+ CONFIGURED_PIN(gpio_defs->mmc.write_protect) -+ ? gpio_defs->mmc.write_protect : "(none)"); -+ return 0; -+} -+ -+/* Similarly, to undo crisv32_mmcspi_gpio_init. */ -+ -+static void crisv32_mmcspi_gpio_exit(struct device *dev, void *xmmc_host) -+{ -+ struct spi_device *spidev = to_spi_device(dev); -+ struct crisv32_mmc_spi_gpio_hwdata *gpio_defs -+ = spidev->controller_data; -+ -+ crisv32_mmcspi_deconfig_common(&gpio_defs->mmc); -+} -+ -+static const struct mmc_spi_platform_data crisv32_mmcspi_gpio_pdata = { -+ .init = crisv32_mmcspi_gpio_init, -+ .exit = __devexit_p(crisv32_mmcspi_gpio_exit), -+ .detect_delay = 0, -+ .get_ro = crisv32_mmcspi_gpio_get_ro, -+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, -+ .setpower = NULL -+}; -+ -+static struct crisv32_mmc_spi_pinstate crisv32_mmcspi_gpio_pinstate; -+static const struct crisv32_mmc_spi_gpio_hwdata crisv32_mmcspi_gpio_cdata = { -+ { -+ .cs = CONFIG_ETRAX_SPI_CS_PIN, -+ .miso = CONFIG_ETRAX_SPI_DATAIN_PIN, -+ .mosi = CONFIG_ETRAX_SPI_DATAOUT_PIN, -+ .sclk = CONFIG_ETRAX_SPI_CLK_PIN -+ }, -+ { -+ .card_detect = CONFIG_ETRAX_SPI_MMC_CD_GPIO_PIN, -+ .write_protect = CONFIG_ETRAX_SPI_MMC_WP_GPIO_PIN, -+ .pinstate = &crisv32_mmcspi_gpio_pinstate -+ } -+}; -+#endif /* CONFIG_SPI_ETRAX_GPIO */ -+ -+struct crisv32_s_b_i_and_driver_info { -+ struct spi_board_info sbi; -+ const char *driver_name; -+ -+ /* -+ * We have to adjust the platform device at time of creation -+ * below, to allow the Linux DMA framework to handle DMA. In -+ * the name of simplicity, we state the dma:able property -+ * twice, a bit redundantly; here and in the controller_data -+ * structure pointed to by spi_board_info. -+ */ -+ int dma_able; -+}; -+ -+/* Convenience-macro to avoid typos causing diffs between sser ports. */ -+ -+#define SSER_CONFIG(n) \ -+ { \ -+ /* \ -+ * No meaningful values for .irq or .chip_select, \ -+ * so we leave them out. \ -+ */ \ -+ { \ -+ .modalias = "mmc_spi", \ -+ .platform_data \ -+ = &crisv32_mmcspi_sser_pdata, \ -+ /* \ -+ * Casting to avoid a compiler const-warning. \ -+ */ \ -+ .controller_data \ -+ = ((void *) \ -+ &crisv32_mmcspi_sser##n##_cdata), \ -+ .max_speed_hz = 50 * 1000 * 1000, \ -+ .bus_num = n, \ -+ /* \ -+ * We only provide one mode, so it must be \ -+ * default. \ -+ */ \ -+ .mode = SPI_MODE_3 \ -+ }, \ -+ crisv32_matching_spi_sser_driver_name, \ -+ WITH_ETRAX_SPI_SSER##n##_DMA \ -+ } -+ -+static const struct crisv32_s_b_i_and_driver_info -+crisv32_mmcspi_devices[] __initdata = { -+#ifdef CONFIG_ETRAX_SPI_SSER0 -+ SSER_CONFIG(0), -+#endif -+#ifdef CONFIG_ETRAX_SPI_SSER1 -+ SSER_CONFIG(1), -+#endif -+#ifdef CONFIG_SPI_ETRAX_GPIO -+ { -+ { -+ .modalias = "mmc_spi", -+ .platform_data = &crisv32_mmcspi_gpio_pdata, -+ /* Casting to avoid a compiler const-warning. */ -+ .controller_data -+ = (void *) &crisv32_mmcspi_gpio_cdata, -+ -+ /* No, we can't even reach this number with GPIO. */ -+ .max_speed_hz = 5 * 1000 * 1000, -+ .bus_num = 2 -+ }, -+ crisv32_matching_spi_gpio_driver_name, -+ 0 -+ }, -+#endif -+}; -+ -+/* Must not be __initdata. */ -+static const char controller_data_ptr_name[] = "controller_data_ptr"; -+static u64 allmem_mask = ~(u32) 0; -+ -+/* -+ * We have to register the SSER and GPIO "platform_device"s separately -+ * from the "spi_board_info"s in order to have the drivers separated -+ * from the hardware instance info. -+ */ -+ -+static int __init crisv32_register_mmcspi(void) -+{ -+ int ret; -+ void *retp; -+ const struct crisv32_s_b_i_and_driver_info *sbip; -+ -+ for (sbip = crisv32_mmcspi_devices; -+ sbip < crisv32_mmcspi_devices -+ + ARRAY_SIZE(crisv32_mmcspi_devices); -+ sbip++) { -+ -+ /* -+ * We have to pass the controller data as a device -+ * "resource" (FIXME: too?), so it can be available -+ * for the setup *before* starting the SPI core - -+ * which is where .controller_data makes it to the SPI -+ * structure! -+ */ -+ struct resource mmcspi_res = { -+ .start = (resource_size_t) sbip->sbi.controller_data, -+ .end = (resource_size_t) sbip->sbi.controller_data, -+ .name = controller_data_ptr_name -+ }; -+ -+ /* -+ * Presumably we could pass the irqs and register -+ * addresses and... as individual resources here -+ * instead of privately in spi_board_info -+ * .controller_data, and make that part a bit more -+ * readable. Maybe not worthwhile. -+ */ -+ /* Need to cast away const here. FIXME: fix the pdrs API. */ -+ retp = platform_device_alloc(sbip->driver_name, -+ sbip->sbi.bus_num); -+ if (IS_ERR_VALUE(PTR_ERR(retp))) -+ return PTR_ERR(retp); -+ -+ /* -+ * We can't use platform_device_register_simple as we -+ * want to set stuff in the device to mark that we'd -+ * prefer buffers explicitly passed as DMA-able. -+ * Disabling/omitting the "if" below, cause testing of -+ * the non-DMA-mem execution path of a DMA-capable -+ * driver. -+ */ -+ if (sbip->dma_able) { -+ struct platform_device *pdev = retp; -+ -+ pdev->dev.dma_mask = &allmem_mask; -+ pdev->dev.coherent_dma_mask = allmem_mask; -+ } -+ -+ if ((ret = platform_device_add_resources(retp, &mmcspi_res, 1)) != 0 -+ || (ret = platform_device_add(retp)) != 0) { -+ platform_device_put(retp); -+ return ret; -+ } -+ -+ /* -+ * The cost of keeping all info rooted at -+ * crisv32_mmcspi_devices is the allocation overhead -+ * for allocating separately each board info (in the -+ * unlikely event that there's more than one). -+ */ -+ ret = spi_register_board_info(&sbip->sbi, 1); -+ if (ret != 0) -+ return ret; -+ } -+ -+ return 0; -+} -+#ifdef MODULE -+#error "Non-module because spi_register_board_info is one-way; there's no unregister function" -+#endif -+ -+/* -+ * Needs to be called before __initcall/module_init because the SPI -+ * bus scanning happens when the actual driver registers with the SPI -+ * machinery (spi_bitbang_start/spi_register_master), not when the -+ * device registers (spi_register_board_info). -+ */ -+subsys_initcall(crisv32_register_mmcspi); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/cryptocop.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/cryptocop.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/cryptocop.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/cryptocop.c 2007-01-09 10:29:20.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: cryptocop.c,v 1.13 2005/04/21 17:27:55 henriken Exp $ -+/* $Id: cryptocop.c,v 1.22 2007/01/09 09:29:20 starvik Exp $ - * - * Stream co-processor driver for the ETRAX FS - * -@@ -1718,7 +1718,7 @@ - * i = i + 1 - * } - * i = Nk -- * -+ * - * while (i < (Nb * (Nr + 1))) { - * temp = w[i - 1] - * if ((i mod Nk) == 0) { -@@ -1886,7 +1886,7 @@ - } - - static irqreturn_t --dma_done_interrupt(int irq, void *dev_id, struct pt_regs * regs) -+dma_done_interrupt(int irq, void *dev_id) - { - struct cryptocop_prio_job *done_job; - reg_dma_rw_ack_intr ack_intr = { -@@ -2226,6 +2226,7 @@ - &pj->iop->ctx_out, (char*)virt_to_phys(&pj->iop->ctx_out))); - - /* Start input DMA. */ -+ flush_dma_context(&pj->iop->ctx_in); - DMA_START_CONTEXT(regi_dma9, virt_to_phys(&pj->iop->ctx_in)); - - /* Start output DMA. */ -@@ -3459,7 +3460,7 @@ - int err; - int i; - static int initialized = 0; -- -+ - if (initialized) - return 0; - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/gpio.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/gpio.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/gpio.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/gpio.c 2007-01-09 10:29:20.000000000 +0100 -@@ -1,68 +1,15 @@ --/* $Id: gpio.c,v 1.16 2005/06/19 17:06:49 starvik Exp $ -- * -+/* - * ETRAX CRISv32 general port I/O device - * -- * Copyright (c) 1999, 2000, 2001, 2002, 2003 Axis Communications AB -+ * Copyright (c) 1999-2006 Axis Communications AB - * - * Authors: Bjorn Wesen (initial version) - * Ola Knutsson (LED handling) - * Johan Adolfsson (read/set directions, write, port G, - * port to ETRAX FS. - * -- * $Log: gpio.c,v $ -- * Revision 1.16 2005/06/19 17:06:49 starvik -- * Merge of Linux 2.6.12. -- * -- * Revision 1.15 2005/05/25 08:22:20 starvik -- * Changed GPIO port order to fit packages/devices/axis-2.4. -- * -- * Revision 1.14 2005/04/24 18:35:08 starvik -- * Updated with final register headers. -- * -- * Revision 1.13 2005/03/15 15:43:00 starvik -- * dev_id needs to be supplied for shared IRQs. -- * -- * Revision 1.12 2005/03/10 17:12:00 starvik -- * Protect alarm list with spinlock. -- * -- * Revision 1.11 2005/01/05 06:08:59 starvik -- * No need to do local_irq_disable after local_irq_save. -- * -- * Revision 1.10 2004/11/19 08:38:31 starvik -- * Removed old crap. -- * -- * Revision 1.9 2004/05/14 07:58:02 starvik -- * Merge of changes from 2.4 -- * -- * Revision 1.8 2003/09/11 07:29:50 starvik -- * Merge of Linux 2.6.0-test5 -- * -- * Revision 1.7 2003/07/10 13:25:46 starvik -- * Compiles for 2.5.74 -- * Lindented ethernet.c -- * -- * Revision 1.6 2003/07/04 08:27:46 starvik -- * Merge of Linux 2.5.74 -- * -- * Revision 1.5 2003/06/10 08:26:37 johana -- * Etrax -> ETRAX CRISv32 -- * -- * Revision 1.4 2003/06/05 14:22:48 johana -- * Initialise some_alarms. -- * -- * Revision 1.3 2003/06/05 10:15:46 johana -- * New INTR_VECT macros. -- * Enable interrupts in global config. -- * -- * Revision 1.2 2003/06/03 15:52:50 johana -- * Initial CRIS v32 version. -- * -- * Revision 1.1 2003/06/03 08:53:15 johana -- * Copy of os/lx25/arch/cris/arch-v10/drivers/gpio.c version 1.7. -- * - */ - -- - #include - #include - #include -@@ -85,6 +32,13 @@ - #include - #include - -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+#include "i2c.h" -+ -+#define VIRT_I2C_ADDR 0x40 -+#endif -+ -+ - /* The following gio ports on ETRAX FS is available: - * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge - * pb 18 bits -@@ -111,6 +65,10 @@ - static wait_queue_head_t *gpio_wq; - #endif - -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, -+ unsigned long arg); -+#endif - static int gpio_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); - static ssize_t gpio_write(struct file * file, const char * buf, size_t count, -@@ -148,55 +106,75 @@ - #define GIO_REG_RD_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg ) - #define GIO_REG_WR_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg ) - unsigned long led_dummy; -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+static unsigned long virtual_dummy; -+static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE; -+static unsigned short cached_virtual_gpio_read = 0; -+#endif - --static volatile unsigned long *data_out[NUM_PORTS] = { -- GIO_REG_WR_ADDR(rw_pa_dout), -- GIO_REG_WR_ADDR(rw_pb_dout), -+static volatile unsigned long *data_out[NUM_PORTS] = { -+ GIO_REG_WR_ADDR(rw_pa_dout), -+ GIO_REG_WR_ADDR(rw_pb_dout), - &led_dummy, -- GIO_REG_WR_ADDR(rw_pc_dout), -- GIO_REG_WR_ADDR(rw_pd_dout), -+ GIO_REG_WR_ADDR(rw_pc_dout), -+ GIO_REG_WR_ADDR(rw_pd_dout), - GIO_REG_WR_ADDR(rw_pe_dout), -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ &virtual_dummy, -+#endif - }; - --static volatile unsigned long *data_in[NUM_PORTS] = { -- GIO_REG_RD_ADDR(r_pa_din), -- GIO_REG_RD_ADDR(r_pb_din), -+static volatile unsigned long *data_in[NUM_PORTS] = { -+ GIO_REG_RD_ADDR(r_pa_din), -+ GIO_REG_RD_ADDR(r_pb_din), - &led_dummy, -- GIO_REG_RD_ADDR(r_pc_din), -- GIO_REG_RD_ADDR(r_pd_din), -+ GIO_REG_RD_ADDR(r_pc_din), -+ GIO_REG_RD_ADDR(r_pd_din), - GIO_REG_RD_ADDR(r_pe_din), -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ &virtual_dummy, -+#endif - }; - --static unsigned long changeable_dir[NUM_PORTS] = { -+static unsigned long changeable_dir[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_DIR, - CONFIG_ETRAX_PB_CHANGEABLE_DIR, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_DIR, -- CONFIG_ETRAX_PD_CHANGEABLE_DIR, -+ CONFIG_ETRAX_PD_CHANGEABLE_DIR, - CONFIG_ETRAX_PE_CHANGEABLE_DIR, -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ CONFIG_ETRAX_PV_CHANGEABLE_DIR, -+#endif - }; - --static unsigned long changeable_bits[NUM_PORTS] = { -+static unsigned long changeable_bits[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_BITS, - CONFIG_ETRAX_PB_CHANGEABLE_BITS, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_BITS, - CONFIG_ETRAX_PD_CHANGEABLE_BITS, - CONFIG_ETRAX_PE_CHANGEABLE_BITS, -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ CONFIG_ETRAX_PV_CHANGEABLE_BITS, -+#endif - }; - --static volatile unsigned long *dir_oe[NUM_PORTS] = { -- GIO_REG_WR_ADDR(rw_pa_oe), -- GIO_REG_WR_ADDR(rw_pb_oe), -+static volatile unsigned long *dir_oe[NUM_PORTS] = { -+ GIO_REG_WR_ADDR(rw_pa_oe), -+ GIO_REG_WR_ADDR(rw_pb_oe), - &led_dummy, -- GIO_REG_WR_ADDR(rw_pc_oe), -- GIO_REG_WR_ADDR(rw_pd_oe), -+ GIO_REG_WR_ADDR(rw_pc_oe), -+ GIO_REG_WR_ADDR(rw_pd_oe), - GIO_REG_WR_ADDR(rw_pe_oe), -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ &virtual_rw_pv_oe, -+#endif - }; - - - --static unsigned int -+static unsigned int - gpio_poll(struct file *file, - poll_table *wait) - { -@@ -278,7 +256,7 @@ - return 0; - - if ((data & priv->highalarm) || -- (~data & priv->lowalarm)) { -+ (~data & priv->lowalarm)) { - mask = POLLIN|POLLRDNORM; - } - -@@ -288,11 +266,26 @@ - - int etrax_gpio_wake_up_check(void) - { -- struct gpio_private *priv = alarmlist; -+ struct gpio_private *priv; - unsigned long data = 0; -+ unsigned long flags; - int ret = 0; -+ spin_lock_irqsave(&alarm_lock, flags); -+ priv = alarmlist; - while (priv) { -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ if (priv->minor == GPIO_MINOR_V) { -+ data = (unsigned long)cached_virtual_gpio_read; -+ } -+ else { -+ data = *data_in[priv->minor]; -+ if (priv->minor == GPIO_MINOR_A) { -+ priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -+ } -+ } -+#else - data = *data_in[priv->minor]; -+#endif - if ((data & priv->highalarm) || - (~data & priv->lowalarm)) { - DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor)); -@@ -301,11 +294,12 @@ - } - priv = priv->next; - } -+ spin_unlock_irqrestore(&alarm_lock, flags); - return ret; - } - --static irqreturn_t --gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+static irqreturn_t -+gpio_poll_timer_interrupt(int irq, void *dev_id) - { - if (gpio_some_alarms) { - return IRQ_RETVAL(etrax_gpio_wake_up_check()); -@@ -314,14 +308,17 @@ - } - - static irqreturn_t --gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+gpio_pa_interrupt(int irq, void *dev_id) - { - reg_gio_rw_intr_mask intr_mask; - reg_gio_r_masked_intr masked_intr; - reg_gio_rw_ack_intr ack_intr; - unsigned long tmp; - unsigned long tmp2; -- -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ unsigned char enable_gpiov_ack = 0; -+#endif -+ - /* Find what PA interrupts are active */ - masked_intr = REG_RD(gio, regi_gio, r_masked_intr); - tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr); -@@ -331,6 +328,17 @@ - tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms); - spin_unlock(&alarm_lock); - -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ /* Something changed on virtual GPIO. Interrupt is acked by -+ * reading the device. -+ */ -+ if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) { -+ i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read, -+ sizeof(cached_virtual_gpio_read)); -+ enable_gpiov_ack = 1; -+ } -+#endif -+ - /* Ack them */ - ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp); - REG_WR(gio, regi_gio, rw_ack_intr, ack_intr); -@@ -339,13 +347,21 @@ - intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); - tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask); - tmp2 &= ~tmp; -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ /* Do not disable interrupt on virtual GPIO. Changes on virtual -+ * pins are only noticed by an interrupt. -+ */ -+ if (enable_gpiov_ack) { -+ tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -+ } -+#endif - intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2); - REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); - - if (gpio_some_alarms) { - return IRQ_RETVAL(etrax_gpio_wake_up_check()); - } -- return IRQ_NONE; -+ return IRQ_NONE; - } - - -@@ -358,8 +374,13 @@ - unsigned long shadow; - volatile unsigned long *port; - ssize_t retval = count; -- /* Only bits 0-7 may be used for write operations but allow all -+ /* Only bits 0-7 may be used for write operations but allow all - devices except leds... */ -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ if (priv->minor == GPIO_MINOR_V) { -+ return -EFAULT; -+ } -+#endif - if (priv->minor == GPIO_MINOR_LEDS) { - return -EFAULT; - } -@@ -416,25 +437,24 @@ - - static int - gpio_open(struct inode *inode, struct file *filp) --{ -+{ - struct gpio_private *priv; - int p = iminor(inode); - - if (p > GPIO_MINOR_LAST) - return -EINVAL; - -- priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private), -+ priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private), - GFP_KERNEL); - - if (!priv) - return -ENOMEM; -+ memset(priv, 0, sizeof(*priv)); - - priv->minor = p; - -- /* initialize the io/alarm struct and link it into our alarmlist */ -+ /* initialize the io/alarm struct */ - -- priv->next = alarmlist; -- alarmlist = priv; - priv->clk_mask = 0; - priv->data_mask = 0; - priv->highalarm = 0; -@@ -443,20 +463,30 @@ - - filp->private_data = (void *)priv; - -+ /* link it into our alarmlist */ -+ spin_lock_irq(&alarm_lock); -+ priv->next = alarmlist; -+ alarmlist = priv; -+ spin_unlock_irq(&alarm_lock); -+ - return 0; - } - - static int - gpio_release(struct inode *inode, struct file *filp) - { -- struct gpio_private *p = alarmlist; -- struct gpio_private *todel = (struct gpio_private *)filp->private_data; -+ struct gpio_private *p; -+ struct gpio_private *todel; - /* local copies while updating them: */ - unsigned long a_high, a_low; - unsigned long some_alarms; - - /* unlink from alarmlist and free the private structure */ - -+ spin_lock_irq(&alarm_lock); -+ p = alarmlist; -+ todel = (struct gpio_private *)filp->private_data; -+ - if (p == todel) { - alarmlist = todel->next; - } else { -@@ -473,6 +503,9 @@ - a_low = 0; - while (p) { - if (p->minor == GPIO_MINOR_A) { -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -+#endif - a_high |= p->highalarm; - a_low |= p->lowalarm; - } -@@ -483,23 +516,30 @@ - p = p->next; - } - -- spin_lock(&alarm_lock); -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ /* Variables 'some_alarms' and 'a_low' needs to be set here again -+ * to ensure that interrupt for virtual GPIO is handled. -+ */ -+ some_alarms = 1; -+ a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -+#endif -+ - gpio_some_alarms = some_alarms; - gpio_pa_high_alarms = a_high; - gpio_pa_low_alarms = a_low; -- spin_unlock(&alarm_lock); -+ spin_unlock_irq(&alarm_lock); - - return 0; - } - --/* Main device API. ioctl's to read/set/clear bits, as well as to -+/* Main device API. ioctl's to read/set/clear bits, as well as to - * set alarms to wait for using a subsequent select(). - */ - - unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) - { -- /* Set direction 0=unchanged 1=input, -- * return mask with 1=input -+ /* Set direction 0=unchanged 1=input, -+ * return mask with 1=input - */ - unsigned long flags; - unsigned long dir_shadow; -@@ -512,6 +552,10 @@ - - if (priv->minor == GPIO_MINOR_A) - dir_shadow ^= 0xFF; /* Only 8 bits */ -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ else if (priv->minor == GPIO_MINOR_V) -+ dir_shadow ^= 0xFFFF; /* Only 16 bits */ -+#endif - else - dir_shadow ^= 0x3FFFF; /* Only 18 bits */ - return dir_shadow; -@@ -546,6 +590,11 @@ - return -EINVAL; - } - -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ if (priv->minor == GPIO_MINOR_V) -+ return virtual_gpio_ioctl(file, cmd, arg); -+#endif -+ - switch (_IOC_NR(cmd)) { - case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ - // read the port -@@ -553,8 +602,6 @@ - break; - case IO_SETBITS: - local_irq_save(flags); -- if (arg & 0x04) -- printk("GPIO SET 2\n"); - // set changeable bits with a 1 in arg - shadow = *data_out[priv->minor]; - shadow |= (arg & changeable_bits[priv->minor]); -@@ -563,8 +610,6 @@ - break; - case IO_CLRBITS: - local_irq_save(flags); -- if (arg & 0x04) -- printk("GPIO CLR 2\n"); - // clear changeable bits with a 1 in arg - shadow = *data_out[priv->minor]; - shadow &= ~(arg & changeable_bits[priv->minor]); -@@ -574,52 +619,52 @@ - case IO_HIGHALARM: - // set alarm when bits with 1 in arg go high - priv->highalarm |= arg; -- spin_lock(&alarm_lock); -+ spin_lock_irqsave(&alarm_lock, flags); - gpio_some_alarms = 1; - if (priv->minor == GPIO_MINOR_A) { - gpio_pa_high_alarms |= arg; - } -- spin_unlock(&alarm_lock); -+ spin_unlock_irqrestore(&alarm_lock, flags); - break; - case IO_LOWALARM: - // set alarm when bits with 1 in arg go low - priv->lowalarm |= arg; -- spin_lock(&alarm_lock); -+ spin_lock_irqsave(&alarm_lock, flags); - gpio_some_alarms = 1; - if (priv->minor == GPIO_MINOR_A) { - gpio_pa_low_alarms |= arg; - } -- spin_unlock(&alarm_lock); -+ spin_unlock_irqrestore(&alarm_lock, flags); - break; - case IO_CLRALARM: - // clear alarm for bits with 1 in arg - priv->highalarm &= ~arg; - priv->lowalarm &= ~arg; -- spin_lock(&alarm_lock); -+ spin_lock_irqsave(&alarm_lock, flags); - if (priv->minor == GPIO_MINOR_A) { -- if (gpio_pa_high_alarms & arg || -+ if (gpio_pa_high_alarms & arg || - gpio_pa_low_alarms & arg) { - /* Must update the gpio_pa_*alarms masks */ - } - } -- spin_unlock(&alarm_lock); -+ spin_unlock_irqrestore(&alarm_lock, flags); - break; - case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ - /* Read direction 0=input 1=output */ - return *dir_oe[priv->minor]; - case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ -- /* Set direction 0=unchanged 1=input, -- * return mask with 1=input -+ /* Set direction 0=unchanged 1=input, -+ * return mask with 1=input - */ - return setget_input(priv, arg); - break; - case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ -- /* Set direction 0=unchanged 1=output, -- * return mask with 1=output -+ /* Set direction 0=unchanged 1=output, -+ * return mask with 1=output - */ - return setget_output(priv, arg); - -- case IO_CFG_WRITE_MODE: -+ case IO_CFG_WRITE_MODE: - { - unsigned long dir_shadow; - dir_shadow = *dir_oe[priv->minor]; -@@ -641,7 +686,7 @@ - } - break; - } -- case IO_READ_INBITS: -+ case IO_READ_INBITS: - /* *arg is result of reading the input pins */ - val = *data_in[priv->minor]; - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) -@@ -654,7 +699,7 @@ - if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) - return -EFAULT; - break; -- case IO_SETGET_INPUT: -+ case IO_SETGET_INPUT: - /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ -@@ -684,6 +729,132 @@ - return 0; - } - -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+static int -+virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ unsigned long flags; -+ unsigned short val; -+ unsigned short shadow; -+ struct gpio_private *priv = (struct gpio_private *)file->private_data; -+ -+ switch (_IOC_NR(cmd)) { -+ case IO_SETBITS: -+ local_irq_save(flags); -+ // set changeable bits with a 1 in arg -+ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); -+ shadow |= ~*dir_oe[priv->minor]; -+ shadow |= (arg & changeable_bits[priv->minor]); -+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); -+ local_irq_restore(flags); -+ break; -+ case IO_CLRBITS: -+ local_irq_save(flags); -+ // clear changeable bits with a 1 in arg -+ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); -+ shadow |= ~*dir_oe[priv->minor]; -+ shadow &= ~(arg & changeable_bits[priv->minor]); -+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); -+ local_irq_restore(flags); -+ break; -+ case IO_HIGHALARM: -+ // set alarm when bits with 1 in arg go high -+ priv->highalarm |= arg; -+ spin_lock(&alarm_lock); -+ gpio_some_alarms = 1; -+ spin_unlock(&alarm_lock); -+ break; -+ case IO_LOWALARM: -+ // set alarm when bits with 1 in arg go low -+ priv->lowalarm |= arg; -+ spin_lock(&alarm_lock); -+ gpio_some_alarms = 1; -+ spin_unlock(&alarm_lock); -+ break; -+ case IO_CLRALARM: -+ // clear alarm for bits with 1 in arg -+ priv->highalarm &= ~arg; -+ priv->lowalarm &= ~arg; -+ spin_lock(&alarm_lock); -+ spin_unlock(&alarm_lock); -+ break; -+ case IO_CFG_WRITE_MODE: -+ { -+ unsigned long dir_shadow; -+ dir_shadow = *dir_oe[priv->minor]; -+ -+ priv->clk_mask = arg & 0xFF; -+ priv->data_mask = (arg >> 8) & 0xFF; -+ priv->write_msb = (arg >> 16) & 0x01; -+ /* Check if we're allowed to change the bits and -+ * the direction is correct -+ */ -+ if (!((priv->clk_mask & changeable_bits[priv->minor]) && -+ (priv->data_mask & changeable_bits[priv->minor]) && -+ (priv->clk_mask & dir_shadow) && -+ (priv->data_mask & dir_shadow))) -+ { -+ priv->clk_mask = 0; -+ priv->data_mask = 0; -+ return -EPERM; -+ } -+ break; -+ } -+ case IO_READ_INBITS: -+ /* *arg is result of reading the input pins */ -+ val = cached_virtual_gpio_read; -+ val &= ~*dir_oe[priv->minor]; -+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) -+ return -EFAULT; -+ return 0; -+ break; -+ case IO_READ_OUTBITS: -+ /* *arg is result of reading the output shadow */ -+ i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val)); -+ val &= *dir_oe[priv->minor]; -+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) -+ return -EFAULT; -+ break; -+ case IO_SETGET_INPUT: -+ { -+ /* bits set in *arg is set to input, -+ * *arg updated with current input pins. -+ */ -+ unsigned short input_mask = ~*dir_oe[priv->minor]; -+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) -+ return -EFAULT; -+ val = setget_input(priv, val); -+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) -+ return -EFAULT; -+ if ((input_mask & val) != input_mask) { -+ /* Input pins changed. All ports desired as input -+ * should be set to logic 1. -+ */ -+ unsigned short change = input_mask ^ val; -+ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); -+ shadow &= ~change; -+ shadow |= val; -+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); -+ } -+ break; -+ } -+ case IO_SETGET_OUTPUT: -+ /* bits set in *arg is set to output, -+ * *arg updated with current output pins. -+ */ -+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) -+ return -EFAULT; -+ val = setget_output(priv, val); -+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) -+ return -EFAULT; -+ break; -+ default: -+ return -EINVAL; -+ } /* switch */ -+ return 0; -+} -+#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */ -+ - static int - gpio_leds_ioctl(unsigned int cmd, unsigned long arg) - { -@@ -714,6 +885,66 @@ - .release = gpio_release, - }; - -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+static void -+virtual_gpio_init(void) -+{ -+ reg_gio_rw_intr_cfg intr_cfg; -+ reg_gio_rw_intr_mask intr_mask; -+ unsigned short shadow; -+ -+ shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */ -+ shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT; -+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); -+ -+ /* Set interrupt mask and on what state the interrupt shall trigger. -+ * For virtual gpio the interrupt shall trigger on logic '0'. -+ */ -+ intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); -+ intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); -+ -+ switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) { -+ case 0: -+ intr_cfg.pa0 = regk_gio_lo; -+ intr_mask.pa0 = regk_gio_yes; -+ break; -+ case 1: -+ intr_cfg.pa1 = regk_gio_lo; -+ intr_mask.pa1 = regk_gio_yes; -+ break; -+ case 2: -+ intr_cfg.pa2 = regk_gio_lo; -+ intr_mask.pa2 = regk_gio_yes; -+ break; -+ case 3: -+ intr_cfg.pa3 = regk_gio_lo; -+ intr_mask.pa3 = regk_gio_yes; -+ break; -+ case 4: -+ intr_cfg.pa4 = regk_gio_lo; -+ intr_mask.pa4 = regk_gio_yes; -+ break; -+ case 5: -+ intr_cfg.pa5 = regk_gio_lo; -+ intr_mask.pa5 = regk_gio_yes; -+ break; -+ case 6: -+ intr_cfg.pa6 = regk_gio_lo; -+ intr_mask.pa6 = regk_gio_yes; -+ break; -+ case 7: -+ intr_cfg.pa7 = regk_gio_lo; -+ intr_mask.pa7 = regk_gio_yes; -+ break; -+ } -+ -+ REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); -+ REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); -+ -+ gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -+ gpio_some_alarms = 1; -+} -+#endif - - /* main driver initialization routine, called from mem.c */ - -@@ -732,17 +963,18 @@ - } - - /* Clear all leds */ -- LED_NETWORK_SET(0); -+ LED_NETWORK_GRP0_SET(0); -+ LED_NETWORK_GRP1_SET(0); - LED_ACTIVE_SET(0); - LED_DISK_READ(0); - LED_DISK_WRITE(0); - -- printk("ETRAX FS GPIO driver v2.5, (c) 2003-2005 Axis Communications AB\n"); -+ printk("ETRAX FS GPIO driver v2.5, (c) 2003-2006 Axis Communications AB\n"); - /* We call etrax_gpio_wake_up_check() from timer interrupt and - * from cpu_idle() in kernel/process.c - * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms - * in some tests. -- */ -+ */ - if (request_irq(TIMER_INTR_VECT, gpio_poll_timer_interrupt, - IRQF_SHARED | IRQF_DISABLED,"gpio poll", &alarmlist)) { - printk("err: timer0 irq for gpio\n"); -@@ -757,6 +989,10 @@ - intr_mask.gen_io = 1; - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); - -+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -+ virtual_gpio_init(); -+#endif -+ - return res; - } - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.c 2006-11-06 16:48:06.000000000 +0100 -@@ -8,11 +8,11 @@ - *! - *! Nov 30 1998 Torbjorn Eliasson Initial version. - *! Bjorn Wesen Elinux kernel version. --*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff - -+*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff - - *! don't use PB_I2C if DS1302 uses same bits, - *! use PB. - *| June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now --*| generates nack on last received byte, -+*| generates nack on last received byte, - *| instead of ack. - *| i2c_getack changed data level while clock - *| was high, causing DS75 to see a stop condition -@@ -22,7 +22,7 @@ - *! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN - *! - *!***************************************************************************/ --/* $Id: i2c.c,v 1.2 2005/05/09 15:29:49 starvik Exp $ */ -+/* $Id: i2c.c,v 1.6 2006/11/06 15:48:06 imres Exp $ */ - /****************** INCLUDE FILES SECTION ***********************************/ - - #include -@@ -60,8 +60,8 @@ - #define I2C_DATA_HIGH 1 - #define I2C_DATA_LOW 0 - --#define i2c_enable() --#define i2c_disable() -+#define i2c_enable() -+#define i2c_disable() - - /* enable or disable output-enable, to select output or input on the i2c bus */ - -@@ -79,6 +79,8 @@ - - #define i2c_delay(usecs) udelay(usecs) - -+static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */ -+ - /****************** VARIABLE SECTION ************************************/ - - static struct crisv32_iopin cris_i2c_clk; -@@ -154,7 +156,7 @@ - } else { - i2c_data(I2C_DATA_LOW); - } -- -+ - i2c_delay(CLOCK_LOW_TIME/2); - i2c_clk(I2C_CLOCK_HIGH); - i2c_delay(CLOCK_HIGH_TIME); -@@ -213,7 +215,7 @@ - } - i2c_clk(I2C_CLOCK_HIGH); - i2c_delay(CLOCK_HIGH_TIME); -- -+ - /* - * we leave the clock low, getbyte is usually followed - * by sendack/nack, they assume the clock to be low -@@ -252,6 +254,7 @@ - * generate ACK clock pulse - */ - i2c_clk(I2C_CLOCK_HIGH); -+#if 0 - /* - * Use PORT PB instead of I2C - * for input. (I2C not working) -@@ -264,6 +267,8 @@ - i2c_data(1); - i2c_disable(); - i2c_dir_in(); -+#endif -+ - /* - * now wait for ack - */ -@@ -285,13 +290,15 @@ - * before we enable our output. If we keep data high - * and enable output, we would generate a stop condition. - */ -+#if 0 - i2c_data(I2C_DATA_LOW); -- -+ - /* - * end clock pulse - */ - i2c_enable(); - i2c_dir_out(); -+#endif - i2c_clk(I2C_CLOCK_LOW); - i2c_delay(CLOCK_HIGH_TIME/4); - /* -@@ -338,7 +345,7 @@ - */ - i2c_data(I2C_DATA_HIGH); - i2c_delay(CLOCK_LOW_TIME); -- -+ - i2c_dir_in(); - } - -@@ -369,24 +376,160 @@ - i2c_delay(CLOCK_HIGH_TIME); - i2c_clk(I2C_CLOCK_LOW); - i2c_delay(CLOCK_LOW_TIME); -- -+ - i2c_dir_in(); - } - - /*#--------------------------------------------------------------------------- - *# -+*# FUNCTION NAME: i2c_write -+*# -+*# DESCRIPTION : Writes a value to an I2C device -+*# -+*#--------------------------------------------------------------------------*/ -+int -+i2c_write(unsigned char theSlave, void *data, size_t nbytes) -+{ -+ int error, cntr = 3; -+ unsigned char bytes_wrote = 0; -+ unsigned char value; -+ unsigned long flags; -+ -+ spin_lock(&i2c_lock); -+ -+ do { -+ error = 0; -+ /* -+ * we don't like to be interrupted -+ */ -+ local_irq_save(flags); -+ -+ i2c_start(); -+ /* -+ * send slave address -+ */ -+ i2c_outbyte((theSlave & 0xfe)); -+ /* -+ * wait for ack -+ */ -+ if(!i2c_getack()) -+ error = 1; -+ /* -+ * send data -+ */ -+ for (bytes_wrote = 0; bytes_wrote < nbytes; bytes_wrote++) { -+ memcpy(&value, data + bytes_wrote, sizeof value); -+ i2c_outbyte(value); -+ /* -+ * now it's time to wait for ack -+ */ -+ if (!i2c_getack()) -+ error |= 4; -+ } -+ /* -+ * end byte stream -+ */ -+ i2c_stop(); -+ /* -+ * enable interrupt again -+ */ -+ local_irq_restore(flags); -+ -+ } while(error && cntr--); -+ -+ i2c_delay(CLOCK_LOW_TIME); -+ -+ spin_unlock(&i2c_lock); -+ -+ return -error; -+} -+ -+/*#--------------------------------------------------------------------------- -+*# -+*# FUNCTION NAME: i2c_read -+*# -+*# DESCRIPTION : Reads a value from an I2C device -+*# -+*#--------------------------------------------------------------------------*/ -+int -+i2c_read(unsigned char theSlave, void *data, size_t nbytes) -+{ -+ unsigned char b = 0; -+ unsigned char bytes_read = 0; -+ int error, cntr = 3; -+ unsigned long flags; -+ -+ spin_lock(&i2c_lock); -+ -+ do { -+ error = 0; -+ memset(data, 0, nbytes); -+ /* -+ * we don't like to be interrupted -+ */ -+ local_irq_save(flags); -+ /* -+ * generate start condition -+ */ -+ i2c_start(); -+ -+ /* -+ * send slave address -+ */ -+ i2c_outbyte((theSlave | 0x01)); -+ /* -+ * wait for ack -+ */ -+ if(!i2c_getack()) -+ error = 1; -+ /* -+ * fetch data -+ */ -+ for (bytes_read = 0; bytes_read < nbytes; bytes_read++) { -+ b = i2c_inbyte(); -+ memcpy(data + bytes_read, &b, sizeof b); -+ -+ if (bytes_read < (nbytes - 1)) { -+ i2c_sendack(); -+ } -+ } -+ /* -+ * last received byte needs to be nacked -+ * instead of acked -+ */ -+ i2c_sendnack(); -+ /* -+ * end sequence -+ */ -+ i2c_stop(); -+ /* -+ * enable interrupt again -+ */ -+ local_irq_restore(flags); -+ -+ } while(error && cntr--); -+ -+ spin_unlock(&i2c_lock); -+ -+ return -error; -+} -+ -+/*#--------------------------------------------------------------------------- -+*# - *# FUNCTION NAME: i2c_writereg - *# - *# DESCRIPTION : Writes a value to an I2C device - *# - *#--------------------------------------------------------------------------*/ - int --i2c_writereg(unsigned char theSlave, unsigned char theReg, -+i2c_writereg(unsigned char theSlave, unsigned char theReg, - unsigned char theValue) - { - int error, cntr = 3; - unsigned long flags; - -+ spin_lock(&i2c_lock); -+ - do { - error = 0; - /* -@@ -431,10 +574,12 @@ - * enable interrupt again - */ - local_irq_restore(flags); -- -+ - } while(error && cntr--); - - i2c_delay(CLOCK_LOW_TIME); -+ -+ spin_unlock(&i2c_lock); - - return -error; - } -@@ -453,6 +598,8 @@ - int error, cntr = 3; - unsigned long flags; - -+ spin_lock(&i2c_lock); -+ - do { - error = 0; - /* -@@ -463,7 +610,7 @@ - * generate start condition - */ - i2c_start(); -- -+ - /* - * send slave address - */ -@@ -482,7 +629,7 @@ - * now it's time to wait for ack - */ - if(!i2c_getack()) -- error = 1; -+ error |= 2; - /* - * repeat start condition - */ -@@ -496,7 +643,7 @@ - * wait for ack - */ - if(!i2c_getack()) -- error = 1; -+ error |= 4; - /* - * fetch register - */ -@@ -514,9 +661,11 @@ - * enable interrupt again - */ - local_irq_restore(flags); -- -+ - } while(error && cntr--); - -+ spin_unlock(&i2c_lock); -+ - return b; - } - -@@ -546,7 +695,7 @@ - switch (_IOC_NR(cmd)) { - case I2C_WRITEREG: - /* write to an i2c slave */ -- D(printk("i2cw %d %d %d\n", -+ D(printk("i2cw %d %d %d\n", - I2C_ARGSLAVE(arg), - I2C_ARGREG(arg), - I2C_ARGVALUE(arg))); -@@ -558,18 +707,18 @@ - { - unsigned char val; - /* read from an i2c slave */ -- D(printk("i2cr %d %d ", -+ D(printk("i2cr %d %d ", - I2C_ARGSLAVE(arg), - I2C_ARGREG(arg))); - val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg)); - D(printk("= %d\n", val)); - return val; -- } -+ } - default: - return -EINVAL; - - } -- -+ - return 0; - } - -@@ -583,28 +732,53 @@ - int __init - i2c_init(void) - { -- int res; -+ static int res = 0; -+ static int first = 1; -+ -+ if (!first) { -+ return res; -+ } -+ first = 0; - -- /* Setup and enable the Port B I2C interface */ -+ /* Setup and enable the DATA and CLK pins */ - -- crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT); -- crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT); -+ res = crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT); -+ if (res < 0) { -+ return res; -+ } -+ -+ res = crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT); -+ crisv32_io_set_dir(&cris_i2c_clk, crisv32_io_dir_out); -+ -+ return res; -+} - -- /* register char device */ - -+int __init -+i2c_register(void) -+{ -+ -+ int res; -+ -+ res = i2c_init(); -+ if (res < 0) { -+ return res; -+ } -+ -+ /* register char device */ - res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops); - if(res < 0) { - printk(KERN_ERR "i2c: couldn't get a major number.\n"); - return res; - } - -- printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n"); -- -+ printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n"); -+ - return 0; - } - - /* this makes sure that i2c_init is called during boot */ - --module_init(i2c_init); -+module_init(i2c_register); - - /****************** END OF FILE i2c.c ********************************/ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.h linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.h ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.h 2006-11-06 16:48:06.000000000 +0100 -@@ -3,6 +3,8 @@ - - /* High level I2C actions */ - int __init i2c_init(void); -+int i2c_write(unsigned char theSlave, void *data, size_t nbytes); -+int i2c_read(unsigned char theSlave, void *data, size_t nbytes); - int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue); - unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg); - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/iop_fw_load.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/iop_fw_load.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/iop_fw_load.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/iop_fw_load.c 2005-04-07 11:27:46.000000000 +0200 -@@ -67,12 +67,12 @@ - return -ENODEV; - - /* get firmware */ -- retval = request_firmware(&fw_entry, -- fw_name, -+ retval = request_firmware(&fw_entry, -+ fw_name, - &iop_spu_device[spu_inst]); - if (retval != 0) - { -- printk(KERN_ERR -+ printk(KERN_ERR - "iop_load_spu: Failed to load firmware \"%s\"\n", - fw_name); - return retval; -@@ -123,7 +123,7 @@ - return retval; - } - --int iop_fw_load_mpu(unsigned char *fw_name) -+int iop_fw_load_mpu(unsigned char *fw_name) - { - const unsigned int start_addr = 0; - reg_iop_mpu_rw_ctrl mpu_ctrl; -@@ -135,13 +135,13 @@ - retval = request_firmware(&fw_entry, fw_name, &iop_mpu_device); - if (retval != 0) - { -- printk(KERN_ERR -+ printk(KERN_ERR - "iop_load_spu: Failed to load firmware \"%s\"\n", - fw_name); - return retval; - } - data = (u32 *) fw_entry->data; -- -+ - /* disable MPU */ - mpu_ctrl.en = regk_iop_mpu_no; - REG_WR(iop_mpu, regi_iop_mpu, rw_ctrl, mpu_ctrl); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/nandflash.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/nandflash.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/nandflash.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/nandflash.c 2006-10-16 14:56:46.000000000 +0200 -@@ -5,8 +5,8 @@ - * - * Derived from drivers/mtd/nand/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) -- * -- * $Id: nandflash.c,v 1.3 2005/06/01 10:57:12 starvik Exp $ -+ * -+ * $Id: nandflash.c,v 1.8 2006/10/16 12:56:46 ricardw Exp $ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as -@@ -32,37 +32,53 @@ - #define ALE_BIT 6 - #define BY_BIT 7 - -+/* Bitmask for control pins */ -+#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT)) -+ -+/* Bitmask for mtd nand control bits */ -+#define CTRL_BITMASK (NAND_NCE | NAND_CLE | NAND_ALE) -+ -+ - static struct mtd_info *crisv32_mtd = NULL; --/* -+/* - * hardware specific access to control-lines - */ --static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd) -+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd, -+ unsigned int ctrl) - { - unsigned long flags; -- reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout); -+ reg_gio_rw_pa_dout dout; -+ struct nand_chip *this = mtd->priv; - - local_irq_save(flags); -- switch(cmd){ -- case NAND_CTL_SETCLE: -- dout.data |= (1<IO_ADDR_W); -+ - local_irq_restore(flags); - } - -@@ -129,26 +145,26 @@ - /* Set address of NAND IO lines */ - this->IO_ADDR_R = read_cs; - this->IO_ADDR_W = write_cs; -- this->hwcontrol = crisv32_hwcontrol; -+ this->cmd_ctrl = crisv32_hwcontrol; - this->dev_ready = crisv32_device_ready; - /* 20 us command delay time */ -- this->chip_delay = 20; -- this->eccmode = NAND_ECC_SOFT; -+ this->chip_delay = 20; -+ this->ecc.mode = NAND_ECC_SOFT; - - /* Enable the following for a flash based bad block table */ -- this->options = NAND_USE_FLASH_BBT; -+ /* this->options = NAND_USE_FLASH_BBT; */ - - /* Scan to find existance of the device */ - if (nand_scan (crisv32_mtd, 1)) { - err = -ENXIO; - goto out_ior; - } -- -+ - return crisv32_mtd; -- -+ - out_ior: - iounmap((void *)read_cs); -- iounmap((void *)write_cs); -+ iounmap((void *)write_cs); - out_mtd: - kfree (crisv32_mtd); - return NULL; -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pcf8563.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pcf8563.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pcf8563.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pcf8563.c 2006-10-27 17:22:13.000000000 +0200 -@@ -10,7 +10,7 @@ - * 400 kbits/s. The built-in word address register is incremented - * automatically after each written or read byte. - * -- * Copyright (c) 2002-2003, Axis Communications AB -+ * Copyright (c) 2002-2006, Axis Communications AB - * All rights reserved. - * - * Author: Tobias Anderberg . -@@ -37,24 +37,27 @@ - #define PCF8563_MAJOR 121 /* Local major number. */ - #define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ - #define PCF8563_NAME "PCF8563" --#define DRIVER_VERSION "$Revision: 1.1 $" -+#define DRIVER_VERSION "$Revision: 1.9 $" - - /* Two simple wrapper macros, saves a few keystrokes. */ - #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) - #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) - -+static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */ -+ - static const unsigned char days_in_month[] = - { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; - - int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); --int pcf8563_open(struct inode *, struct file *); --int pcf8563_release(struct inode *, struct file *); -+ -+/* Cache VL bit value read at driver init since writing the RTC_SECOND -+ * register clears the VL status. -+ */ -+static int voltage_low = 0; - - static struct file_operations pcf8563_fops = { - owner: THIS_MODULE, - ioctl: pcf8563_ioctl, -- open: pcf8563_open, -- release: pcf8563_release, - }; - - unsigned char -@@ -62,7 +65,7 @@ - { - unsigned char res = rtc_read(reg); - -- /* The PCF8563 does not return 0 for unimplemented bits */ -+ /* The PCF8563 does not return 0 for unimplemented bits. */ - switch (reg) { - case RTC_SECONDS: - case RTC_MINUTES: -@@ -95,11 +98,6 @@ - void - pcf8563_writereg(int reg, unsigned char val) - { --#ifdef CONFIG_ETRAX_RTC_READONLY -- if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR)) -- return; --#endif -- - rtc_write(reg, val); - } - -@@ -114,11 +112,13 @@ - tm->tm_mon = rtc_read(RTC_MONTH); - tm->tm_year = rtc_read(RTC_YEAR); - -- if (tm->tm_sec & 0x80) -+ if (tm->tm_sec & 0x80) { - printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " - "information is no longer guaranteed!\n", PCF8563_NAME); -+ } - -- tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0); -+ tm->tm_year = BCD_TO_BIN(tm->tm_year) + -+ ((tm->tm_mon & 0x80) ? 100 : 0); - tm->tm_sec &= 0x7F; - tm->tm_min &= 0x7F; - tm->tm_hour &= 0x3F; -@@ -137,8 +137,20 @@ - int __init - pcf8563_init(void) - { -+ static int res = 0; -+ static int first = 1; -+ -+ if (!first) { -+ return res; -+ } -+ first = 0; -+ - /* Initiate the i2c protocol. */ -- i2c_init(); -+ res = i2c_init(); -+ if (res < 0) { -+ printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n"); -+ return res; -+ } - - /* - * First of all we need to reset the chip. This is done by -@@ -170,31 +182,28 @@ - if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0) - goto err; - -- if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { -- printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n", -- PCF8563_NAME, PCF8563_MAJOR); -- return -1; -+ /* Check for low voltage, and warn about it. */ -+ if (rtc_read(RTC_SECONDS) & 0x80) { -+ voltage_low = 1; -+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable " -+ "date/time information is no longer guaranteed!\n", -+ PCF8563_NAME); - } - -- printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); -- -- /* Check for low voltage, and warn about it.. */ -- if (rtc_read(RTC_SECONDS) & 0x80) -- printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " -- "information is no longer guaranteed!\n", PCF8563_NAME); -- -- return 0; -+ return res; - - err: - printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME); -- return -1; -+ res = -1; -+ return res; - } - - void __exit - pcf8563_exit(void) - { - if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) { -- printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME); -+ printk(KERN_INFO "%s: Unable to unregister device.\n", -+ PCF8563_NAME); - } - } - -@@ -203,7 +212,8 @@ - * POSIX says so! - */ - int --pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) -+pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, -+ unsigned long arg) - { - /* Some sanity checks. */ - if (_IOC_TYPE(cmd) != RTC_MAGIC) -@@ -217,31 +227,35 @@ - { - struct rtc_time tm; - -- memset(&tm, 0, sizeof (struct rtc_time)); -+ spin_lock(&rtc_lock); -+ memset(&tm, 0, sizeof tm); - get_rtc_time(&tm); - -- if (copy_to_user((struct rtc_time *) arg, &tm, sizeof tm)) { -+ if (copy_to_user((struct rtc_time *) arg, &tm, -+ sizeof tm)) { -+ spin_unlock(&rtc_lock); - return -EFAULT; - } - -+ spin_unlock(&rtc_lock); -+ - return 0; - } -- - case RTC_SET_TIME: - { --#ifdef CONFIG_ETRAX_RTC_READONLY -- return -EPERM; --#else - int leap; - int year; - int century; - struct rtc_time tm; - -+ memset(&tm, 0, sizeof tm); - if (!capable(CAP_SYS_TIME)) - return -EPERM; - -- if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm)) -+ if (copy_from_user(&tm, (struct rtc_time *) arg, -+ sizeof tm)) { - return -EFAULT; -+ } - - /* Convert from struct tm to struct rtc_time. */ - tm.tm_year += 1900; -@@ -253,7 +267,8 @@ - * that years divisible by 400 _are_ leap years. - */ - year = tm.tm_year; -- leap = (tm.tm_mon == 2) && ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); -+ leap = (tm.tm_mon == 2) && -+ ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); - - /* Perform some sanity checks. */ - if ((tm.tm_year < 1970) || -@@ -263,19 +278,23 @@ - (tm.tm_wday >= 7) || - (tm.tm_hour >= 24) || - (tm.tm_min >= 60) || -- (tm.tm_sec >= 60)) -+ (tm.tm_sec >= 60)) { - return -EINVAL; -+ } - - century = (tm.tm_year >= 2000) ? 0x80 : 0; - tm.tm_year = tm.tm_year % 100; - - BIN_TO_BCD(tm.tm_year); -+ BIN_TO_BCD(tm.tm_mon); - BIN_TO_BCD(tm.tm_mday); - BIN_TO_BCD(tm.tm_hour); - BIN_TO_BCD(tm.tm_min); - BIN_TO_BCD(tm.tm_sec); - tm.tm_mon |= century; - -+ spin_lock(&rtc_lock); -+ - rtc_write(RTC_YEAR, tm.tm_year); - rtc_write(RTC_MONTH, tm.tm_mon); - rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ -@@ -284,36 +303,40 @@ - rtc_write(RTC_MINUTES, tm.tm_min); - rtc_write(RTC_SECONDS, tm.tm_sec); - -+ spin_unlock(&rtc_lock); -+ - return 0; --#endif /* !CONFIG_ETRAX_RTC_READONLY */ - } -- - case RTC_VLOW_RD: -- { -- int vl_bit = 0; -- -- if (rtc_read(RTC_SECONDS) & 0x80) { -- vl_bit = 1; -- printk(KERN_WARNING "%s: RTC Voltage Low - reliable " -- "date/time information is no longer guaranteed!\n", -- PCF8563_NAME); -+ if (voltage_low) { -+ printk(KERN_WARNING "%s: RTC Voltage Low - " -+ "reliable date/time information is no " -+ "longer guaranteed!\n", PCF8563_NAME); - } -- if (copy_to_user((int *) arg, &vl_bit, sizeof(int))) -- return -EFAULT; - -+ if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) { -+ return -EFAULT; -+ } -+ - return 0; -- } - - case RTC_VLOW_SET: - { -- /* Clear the VL bit in the seconds register */ -+ /* Clear the VL bit in the seconds register in case -+ * the time has not been set already (which would -+ * have cleared it). This does not really matter -+ * because of the cached voltage_low value but do it -+ * anyway for consistency. */ -+ - int ret = rtc_read(RTC_SECONDS); - - rtc_write(RTC_SECONDS, (ret & 0x7F)); - -+ /* Clear the cached value. */ -+ voltage_low = 0; -+ - return 0; - } -- - default: - return -ENOTTY; - } -@@ -321,17 +344,32 @@ - return 0; - } - --int --pcf8563_open(struct inode *inode, struct file *filp) -+static int __init -+pcf8563_register(void) - { -- return 0; --} -+ if (pcf8563_init() < 0) { -+ printk(KERN_INFO "%s: Unable to initialize Real-Time Clock " -+ "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); -+ return -1; -+ } -+ -+ if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { -+ printk(KERN_INFO "%s: Unable to get major numer %d for RTC " -+ "device.\n", PCF8563_NAME, PCF8563_MAJOR); -+ return -1; -+ } -+ -+ printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, -+ DRIVER_VERSION); -+ -+ /* Check for low voltage, and warn about it. */ -+ if (voltage_low) { -+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " -+ "information is no longer guaranteed!\n", PCF8563_NAME); -+ } - --int --pcf8563_release(struct inode *inode, struct file *filp) --{ - return 0; - } - --module_init(pcf8563_init); -+module_init(pcf8563_register); - module_exit(pcf8563_exit); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/bios.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/bios.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/bios.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/bios.c 2006-10-13 14:43:15.000000000 +0200 -@@ -60,7 +60,7 @@ - u16 cmd, old_cmd; - int idx; - struct resource *r; -- -+ - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for(idx=0; idx<6; idx++) { -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/dma.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/dma.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/dma.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/dma.c 2005-10-31 09:48:04.000000000 +0100 -@@ -62,7 +62,7 @@ - { - struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; - int order = get_order(size); -- -+ - if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { - int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; - -@@ -120,7 +120,7 @@ - void dma_release_declared_memory(struct device *dev) - { - struct dma_coherent_mem *mem = dev->dma_mem; -- -+ - if(!mem) - return; - dev->dma_mem = NULL; -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/sync_serial.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/sync_serial.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/sync_serial.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/sync_serial.c 2007-01-09 10:29:20.000000000 +0100 -@@ -50,7 +50,7 @@ - /* readp writep */ - /* */ - /* If the application keeps up the pace readp will be right after writep.*/ --/* If the application can't keep the pace we have to throw away data. */ -+/* If the application can't keep the pace we have to throw away data. */ - /* The idea is that readp should be ready with the data pointed out by */ - /* Descr[i] when the DMA has filled in Descr[i+1]. */ - /* Otherwise we will discard */ -@@ -65,6 +65,7 @@ - #define IN_DESCR_SIZE 256 - #define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) - #define OUT_BUFFER_SIZE 4096 -+#define NUM_OUT_DESCRS 4 - - #define DEFAULT_FRAME_RATE 0 - #define DEFAULT_WORD_RATE 7 -@@ -112,7 +113,7 @@ - - dma_descr_data in_descr[NUM_IN_DESCR] __attribute__ ((__aligned__(16))); - dma_descr_context in_context __attribute__ ((__aligned__(32))); -- dma_descr_data out_descr __attribute__ ((__aligned__(16))); -+ dma_descr_data out_descr[NUM_OUT_DESCRS] __attribute__ ((__aligned__(16))); - dma_descr_context out_context __attribute__ ((__aligned__(32))); - wait_queue_head_t out_wait_q; - wait_queue_head_t in_wait_q; -@@ -130,9 +131,9 @@ - - static int sync_serial_ioctl(struct inode*, struct file*, - unsigned int cmd, unsigned long arg); --static ssize_t sync_serial_write(struct file * file, const char * buf, -+static ssize_t sync_serial_write(struct file * file, const char * buf, - size_t count, loff_t *ppos); --static ssize_t sync_serial_read(struct file *file, char *buf, -+static ssize_t sync_serial_read(struct file *file, char *buf, - size_t count, loff_t *ppos); - - #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ -@@ -146,8 +147,8 @@ - static void start_dma(struct sync_port *port, const char* data, int count); - static void start_dma_in(sync_port* port); - #ifdef SYNC_SER_DMA --static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs); --static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs); -+static irqreturn_t tr_interrupt(int irq, void *dev_id); -+static irqreturn_t rx_interrupt(int irq, void *dev_id); - #endif - - #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ -@@ -157,7 +158,7 @@ - #define SYNC_SER_MANUAL - #endif - #ifdef SYNC_SER_MANUAL --static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs); -+static irqreturn_t manual_interrupt(int irq, void *dev_id); - #endif - - /* The ports */ -@@ -201,8 +202,8 @@ - { - ports[0].enabled = 0; - ports[1].enabled = 0; -- -- if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 ) -+ -+ if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 ) - { - printk("unable to get major for synchronous serial port\n"); - return -EBUSY; -@@ -243,13 +244,13 @@ - - DEBUG(printk("Init sync serial port %d\n", portnbr)); - -- port->port_nbr = portnbr; -+ port->port_nbr = portnbr; - port->init_irqs = 1; - - port->outp = port->out_buffer; - port->output = 1; - port->input = 0; -- -+ - port->readp = port->flip; - port->writep = port->flip; - port->in_buffer_size = IN_BUFFER_SIZE; -@@ -286,11 +287,16 @@ - tr_cfg.sample_size = 7; - tr_cfg.sh_dir = regk_sser_msbfirst; - tr_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; -+#if 0 - tr_cfg.rate_ctrl = regk_sser_bulk; - tr_cfg.data_pin_use = regk_sser_dout; -+#else -+ tr_cfg.rate_ctrl = regk_sser_iso; -+ tr_cfg.data_pin_use = regk_sser_dout; -+#endif - tr_cfg.bulk_wspace = 1; - REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); -- -+ - rec_cfg.sample_size = 7; - rec_cfg.sh_dir = regk_sser_msbfirst; - rec_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; -@@ -303,17 +309,17 @@ - int avail; - unsigned char *start; - unsigned char *end; -- -+ - start = (unsigned char*)port->readp; /* cast away volatile */ - end = (unsigned char*)port->writep; /* cast away volatile */ - /* 0123456789 0123456789 - * ----- - ----- - * ^rp ^wp ^wp ^rp - */ -- -+ - if (end >= start) - avail = end - start; -- else -+ else - avail = port->in_buffer_size - (start - end); - return avail; - } -@@ -323,17 +329,17 @@ - int avail; - unsigned char *start; - unsigned char *end; -- -+ - start = (unsigned char*)port->readp; /* cast away volatile */ - end = (unsigned char*)port->writep; /* cast away volatile */ - /* 0123456789 0123456789 - * ----- ----- - * ^rp ^wp ^wp ^rp - */ -- -+ - if (end >= start) - avail = end - start; -- else -+ else - avail = port->flip + port->in_buffer_size - start; - return avail; - } -@@ -343,10 +349,10 @@ - int dev = iminor(inode); - sync_port* port; - reg_dma_rw_cfg cfg = {.en = regk_dma_yes}; -- reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; -- -- DEBUG(printk("Open sync serial port %d\n", dev)); -+ reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; - -+ DEBUG(printk("Open sync serial port %d\n", dev)); -+ - if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) - { - DEBUG(printk("Invalid minor %d\n", dev)); -@@ -354,7 +360,7 @@ - } - port = &ports[dev]; - /* Allow open this device twice (assuming one reader and one writer) */ -- if (port->busy == 2) -+ if (port->busy == 2) - { - DEBUG(printk("Device is busy.. \n")); - return -EBUSY; -@@ -422,8 +428,8 @@ - DMA_VERBOSE_ON_ERROR, - 0, - dma_sser1)) { -- free_irq(21, &ports[1]); -- free_irq(20, &ports[1]); -+ free_irq(DMA6_INTR_VECT, &ports[1]); -+ free_irq(DMA7_INTR_VECT, &ports[1]); - printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); - return -EBUSY; - } else if (crisv32_request_dma(SYNC_SER1_RX_DMA_NBR, -@@ -446,7 +452,7 @@ - /* Enable DMA IRQs */ - REG_WR(dma, port->regi_dmain, rw_intr_mask, intr_mask); - REG_WR(dma, port->regi_dmaout, rw_intr_mask, intr_mask); -- /* Set up wordsize = 2 for DMAs. */ -+ /* Set up wordsize = 1 for DMAs. */ - DMA_WR_CMD (port->regi_dmain, regk_dma_set_w_size1); - DMA_WR_CMD (port->regi_dmaout, regk_dma_set_w_size1); - -@@ -497,7 +503,7 @@ - port = &ports[dev]; - if (port->busy) - port->busy--; -- if (!port->busy) -+ if (!port->busy) - /* XXX */ ; - return 0; - } -@@ -508,17 +514,29 @@ - unsigned int mask = 0; - sync_port* port; - DEBUGPOLL( static unsigned int prev_mask = 0; ); -- -+ - port = &ports[dev]; -+ -+ if (!port->started) -+ { -+ reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); -+ reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); -+ cfg.en = regk_sser_yes; -+ rec_cfg.rec_en = port->input; -+ REG_WR(sser, port->regi_sser, rw_cfg, cfg); -+ REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); -+ port->started = 1; -+ } -+ - poll_wait(file, &port->out_wait_q, wait); - poll_wait(file, &port->in_wait_q, wait); - /* Some room to write */ -- if (port->out_count < OUT_BUFFER_SIZE) -+ if (port->output && port->out_count < OUT_BUFFER_SIZE) - mask |= POLLOUT | POLLWRNORM; - /* At least an inbufchunk of data */ -- if (sync_data_avail(port) >= port->inbufchunk) -+ if (port->input && sync_data_avail(port) >= port->inbufchunk) - mask |= POLLIN | POLLRDNORM; -- -+ - DEBUGPOLL(if (mask != prev_mask) - printk("sync_serial_poll: mask 0x%08X %s %s\n", mask, - mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":""); -@@ -531,14 +549,15 @@ - unsigned int cmd, unsigned long arg) - { - int return_val = 0; -+ int dma_w_size = regk_dma_set_w_size1; - int dev = iminor(file->f_dentry->d_inode); - sync_port* port; - reg_sser_rw_tr_cfg tr_cfg; - reg_sser_rw_rec_cfg rec_cfg; -- reg_sser_rw_frm_cfg frm_cfg; -+ reg_sser_rw_frm_cfg frm_cfg; - reg_sser_rw_cfg gen_cfg; - reg_sser_rw_intr_mask intr_mask; -- -+ - if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) - { - DEBUG(printk("Invalid minor %d\n", dev)); -@@ -558,9 +577,32 @@ - case SSP_SPEED: - if (GET_SPEED(arg) == CODEC) - { -+ unsigned int freq; -+ - gen_cfg.base_freq = regk_sser_f32; -- /* FREQ = 0 => 4 MHz => clk_div = 7*/ -- gen_cfg.clk_div = 6 + (1 << GET_FREQ(arg)); -+ -+ /* Clock divider will internally be -+ * gen_cfg.clk_div + 1. -+ */ -+ -+ freq = GET_FREQ(arg); -+ switch (freq) -+ { -+ case FREQ_32kHz: -+ case FREQ_64kHz: -+ case FREQ_128kHz: -+ case FREQ_256kHz: -+ gen_cfg.clk_div = 125 * (1 << (freq - FREQ_256kHz)) - 1; -+ break; -+ case FREQ_512kHz: -+ gen_cfg.clk_div = 62; -+ break; -+ case FREQ_1MHz: -+ case FREQ_2MHz: -+ case FREQ_4MHz: -+ gen_cfg.clk_div = 8 * (1 << freq) - 1; -+ break; -+ } - } - else - { -@@ -625,87 +667,118 @@ - case MASTER_OUTPUT: - port->output = 1; - port->input = 0; -+ frm_cfg.out_on = regk_sser_tr; -+ frm_cfg.frame_pin_dir = regk_sser_out; - gen_cfg.clk_dir = regk_sser_out; - break; - case SLAVE_OUTPUT: - port->output = 1; - port->input = 0; -+ frm_cfg.frame_pin_dir = regk_sser_in; - gen_cfg.clk_dir = regk_sser_in; - break; - case MASTER_INPUT: - port->output = 0; - port->input = 1; -+ frm_cfg.frame_pin_dir = regk_sser_out; -+ frm_cfg.out_on = regk_sser_intern_tb; - gen_cfg.clk_dir = regk_sser_out; - break; - case SLAVE_INPUT: - port->output = 0; - port->input = 1; -+ frm_cfg.frame_pin_dir = regk_sser_in; - gen_cfg.clk_dir = regk_sser_in; - break; - case MASTER_BIDIR: - port->output = 1; - port->input = 1; -+ frm_cfg.frame_pin_dir = regk_sser_out; -+ frm_cfg.out_on = regk_sser_intern_tb; - gen_cfg.clk_dir = regk_sser_out; - break; - case SLAVE_BIDIR: - port->output = 1; - port->input = 1; -+ frm_cfg.frame_pin_dir = regk_sser_in; - gen_cfg.clk_dir = regk_sser_in; - break; - default: - spin_unlock_irq(&port->lock); - return -EINVAL; -- -+ - } - if (!port->use_dma || (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)) - intr_mask.rdav = regk_sser_yes; - break; - case SSP_FRAME_SYNC: -- if (arg & NORMAL_SYNC) -+ if (arg & NORMAL_SYNC) { -+ frm_cfg.rec_delay = 1; - frm_cfg.tr_delay = 1; -+ } - else if (arg & EARLY_SYNC) -- frm_cfg.tr_delay = 0; -+ frm_cfg.rec_delay = frm_cfg.tr_delay = 0; -+ else if (arg & SECOND_WORD_SYNC) { -+ frm_cfg.rec_delay = 17; -+ frm_cfg.tr_delay = 1; -+ } -+ -+ - - tr_cfg.bulk_wspace = frm_cfg.tr_delay; - frm_cfg.early_wend = regk_sser_yes; -- if (arg & BIT_SYNC) -+ if (arg & BIT_SYNC) - frm_cfg.type = regk_sser_edge; - else if (arg & WORD_SYNC) - frm_cfg.type = regk_sser_level; - else if (arg & EXTENDED_SYNC) - frm_cfg.early_wend = regk_sser_no; -- -+ - if (arg & SYNC_ON) - frm_cfg.frame_pin_use = regk_sser_frm; - else if (arg & SYNC_OFF) - frm_cfg.frame_pin_use = regk_sser_gio0; -- -- if (arg & WORD_SIZE_8) -+ -+ if (arg & WORD_SIZE_8) { - rec_cfg.sample_size = tr_cfg.sample_size = 7; -- else if (arg & WORD_SIZE_12) -+ dma_w_size = regk_dma_set_w_size1; -+ } -+ else if (arg & WORD_SIZE_12) { - rec_cfg.sample_size = tr_cfg.sample_size = 11; -- else if (arg & WORD_SIZE_16) -+ dma_w_size = regk_dma_set_w_size2; -+ } -+ else if (arg & WORD_SIZE_16) { - rec_cfg.sample_size = tr_cfg.sample_size = 15; -- else if (arg & WORD_SIZE_24) -+ dma_w_size = regk_dma_set_w_size2; -+ } -+ else if (arg & WORD_SIZE_24) { - rec_cfg.sample_size = tr_cfg.sample_size = 23; -- else if (arg & WORD_SIZE_32) -+ dma_w_size = regk_dma_set_w_size2; -+ } -+ else if (arg & WORD_SIZE_32) { - rec_cfg.sample_size = tr_cfg.sample_size = 31; -+ dma_w_size = regk_dma_set_w_size2; -+ } - - if (arg & BIT_ORDER_MSB) - rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst; - else if (arg & BIT_ORDER_LSB) - rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_lsbfirst; -- -- if (arg & FLOW_CONTROL_ENABLE) -+ -+ if (arg & FLOW_CONTROL_ENABLE) { -+ frm_cfg.status_pin_use = regk_sser_frm; - rec_cfg.fifo_thr = regk_sser_thr16; -- else if (arg & FLOW_CONTROL_DISABLE) -+ } -+ else if (arg & FLOW_CONTROL_DISABLE) { -+ frm_cfg.status_pin_use = regk_sser_gio0; - rec_cfg.fifo_thr = regk_sser_inf; -+ } - - if (arg & CLOCK_NOT_GATED) - gen_cfg.gate_clk = regk_sser_no; - else if (arg & CLOCK_GATED) - gen_cfg.gate_clk = regk_sser_yes; -- -+ - break; - case SSP_IPOLARITY: - /* NOTE!! negedge is considered NORMAL */ -@@ -713,12 +786,12 @@ - rec_cfg.clk_pol = regk_sser_neg; - else if (arg & CLOCK_INVERT) - rec_cfg.clk_pol = regk_sser_pos; -- -+ - if (arg & FRAME_NORMAL) - frm_cfg.level = regk_sser_pos_hi; - else if (arg & FRAME_INVERT) - frm_cfg.level = regk_sser_neg_lo; -- -+ - if (arg & STATUS_NORMAL) - gen_cfg.hold_pol = regk_sser_pos; - else if (arg & STATUS_INVERT) -@@ -726,15 +799,15 @@ - break; - case SSP_OPOLARITY: - if (arg & CLOCK_NORMAL) -- gen_cfg.out_clk_pol = regk_sser_neg; -- else if (arg & CLOCK_INVERT) - gen_cfg.out_clk_pol = regk_sser_pos; -- -+ else if (arg & CLOCK_INVERT) -+ gen_cfg.out_clk_pol = regk_sser_neg; -+ - if (arg & FRAME_NORMAL) - frm_cfg.level = regk_sser_pos_hi; - else if (arg & FRAME_INVERT) - frm_cfg.level = regk_sser_neg_lo; -- -+ - if (arg & STATUS_NORMAL) - gen_cfg.hold_pol = regk_sser_pos; - else if (arg & STATUS_INVERT) -@@ -772,9 +845,10 @@ - - if (port->started) - { -- tr_cfg.tr_en = port->output; - rec_cfg.rec_en = port->input; -+ gen_cfg.en = (port->output | port->input); - } -+ - - REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); - REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); -@@ -782,11 +856,24 @@ - REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); - REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); - -+ -+ if (cmd == SSP_FRAME_SYNC && -+ (arg & (WORD_SIZE_8 | WORD_SIZE_12 | WORD_SIZE_16 | WORD_SIZE_24 | WORD_SIZE_32))) { -+ int en = gen_cfg.en; -+ gen_cfg.en = 0; -+ REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); -+ /* ##### Should DMA be stoped before we change dma size? */ -+ DMA_WR_CMD (port->regi_dmain, dma_w_size); -+ DMA_WR_CMD (port->regi_dmaout, dma_w_size); -+ gen_cfg.en = en; -+ REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); -+ } -+ - spin_unlock_irq(&port->lock); - return return_val; - } - --static ssize_t sync_serial_write(struct file * file, const char * buf, -+static ssize_t sync_serial_write(struct file * file, const char * buf, - size_t count, loff_t *ppos) - { - int dev = iminor(file->f_dentry->d_inode); -@@ -807,7 +894,7 @@ - - DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE)); - /* Space to end of buffer */ -- /* -+ /* - * out_buffer 012345<- c ->OUT_BUFFER_SIZE - * outp^ +out_count - ^free_outp -@@ -824,7 +911,7 @@ - free_outp = outp + port->out_count; - spin_unlock_irqrestore(&port->lock, flags); - out_buffer = (unsigned long)port->out_buffer; -- -+ - /* Find out where and how much to write */ - if (free_outp >= out_buffer + OUT_BUFFER_SIZE) - free_outp -= OUT_BUFFER_SIZE; -@@ -834,7 +921,7 @@ - c = outp - free_outp; - if (c > count) - c = count; -- -+ - // DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c)); - if (copy_from_user((void*)free_outp, buf, c)) - return -EFAULT; -@@ -854,13 +941,10 @@ - if (!port->started) - { - reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); -- reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); - reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); - cfg.en = regk_sser_yes; -- tr_cfg.tr_en = port->output; - rec_cfg.rec_en = port->input; - REG_WR(sser, port->regi_sser, rw_cfg, cfg); -- REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); - REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); - port->started = 1; - } -@@ -887,7 +971,7 @@ - } - - /* Sleep until all sent */ -- -+ - add_wait_queue(&port->out_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); - spin_lock_irqsave(&port->lock, flags); -@@ -916,13 +1000,13 @@ - return count; - } - --static ssize_t sync_serial_read(struct file * file, char * buf, -+static ssize_t sync_serial_read(struct file * file, char * buf, - size_t count, loff_t *ppos) - { - int dev = iminor(file->f_dentry->d_inode); - int avail; - sync_port *port; -- unsigned char* start; -+ unsigned char* start; - unsigned char* end; - unsigned long flags; - -@@ -949,7 +1033,7 @@ - port->started = 1; - } - -- -+ - /* Calculate number of available bytes */ - /* Save pointers to avoid that they are modified by interrupt */ - spin_lock_irqsave(&port->lock, flags); -@@ -958,11 +1042,12 @@ - spin_unlock_irqrestore(&port->lock, flags); - while ((start == end) && !port->full) /* No data */ - { -+ DEBUGREAD(printk("&")); - if (file->f_flags & O_NONBLOCK) -- { -+ { - return -EAGAIN; - } -- -+ - interruptible_sleep_on(&port->in_wait_q); - if (signal_pending(current)) - { -@@ -979,9 +1064,9 @@ - avail = port->in_buffer_size; - else if (end > start) - avail = end - start; -- else -+ else - avail = port->flip + port->in_buffer_size - start; -- -+ - count = count > avail ? avail : count; - if (copy_to_user(buf, start, count)) - return -EFAULT; -@@ -1016,7 +1101,7 @@ - data |= *port->outp++; - port->out_count-=2; - tr_data.data = data; -- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); -+ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) - port->outp = port->out_buffer; - } -@@ -1032,7 +1117,7 @@ - case 24: - port->out_count-=3; - tr_data.data = *(unsigned short *)port->outp; -- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); -+ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - port->outp+=2; - tr_data.data = *port->outp++; - REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); -@@ -1042,10 +1127,10 @@ - case 32: - port->out_count-=4; - tr_data.data = *(unsigned short *)port->outp; -- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); -+ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - port->outp+=2; - tr_data.data = *(unsigned short *)port->outp; -- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); -+ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); - port->outp+=2; - if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) - port->outp = port->out_buffer; -@@ -1056,15 +1141,27 @@ - - static void start_dma(struct sync_port* port, const char* data, int count) - { -+ int i; -+ reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); - port->tr_running = 1; -- port->out_descr.buf = (char*)virt_to_phys((char*)data); -- port->out_descr.after = port->out_descr.buf + count; -- port->out_descr.eol = port->out_descr.intr = 1; -+ for (i = 0; i < NUM_OUT_DESCRS; i++) -+ { -+ port->out_descr[i].buf = (char*)virt_to_phys(port->out_buffer + 1024*i); -+ port->out_descr[i].after = port->out_descr[i].buf + 1024; -+ port->out_descr[i].eol = 0; -+ port->out_descr[i].intr = 1; -+ port->out_descr[i].next = virt_to_phys(&port->out_descr[i+1]); -+ } -+ port->out_descr[i-1].next = virt_to_phys(&port->out_descr[0]); - -- port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr); -- port->out_context.saved_data_buf = port->out_descr.buf; -+ port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr[0]); -+ port->out_context.saved_data_buf = port->out_descr[0].buf; - - DMA_START_CONTEXT(port->regi_dmaout, virt_to_phys((char*)&port->out_context)); -+ -+ tr_cfg.tr_en = regk_sser_yes; -+ REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); -+ - DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count)); - } - -@@ -1073,7 +1170,7 @@ - int i; - char* buf; - port->writep = port->flip; -- -+ - if (port->writep > port->flip + port->in_buffer_size) - { - panic("Offset too large in sync serial driver\n"); -@@ -1099,7 +1196,7 @@ - } - - #ifdef SYNC_SER_DMA --static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs) -+static irqreturn_t tr_interrupt(int irq, void *dev_id) - { - reg_dma_r_masked_intr masked; - reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; -@@ -1108,7 +1205,7 @@ - unsigned int sentl; - int found = 0; - -- for (i = 0; i < NUMBER_OF_PORTS; i++) -+ for (i = 0; i < NUMBER_OF_PORTS; i++) - { - sync_port *port = &ports[i]; - if (!port->enabled || !port->use_dma ) -@@ -1133,18 +1230,21 @@ - if (c > port->out_count) - c = port->out_count; - DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c)); -- start_dma(port, port->outp, c); -+ //start_dma(port, port->outp, c); - } else { -- DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl)); -+ reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); -+ DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl)); - port->tr_running = 0; -+ tr_cfg.tr_en = regk_sser_no; -+ REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); - } - wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */ -- } -+ } - } - return IRQ_RETVAL(found); - } /* tr_interrupt */ - --static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs) -+static irqreturn_t rx_interrupt(int irq, void *dev_id) - { - reg_dma_r_masked_intr masked; - reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; -@@ -1152,7 +1252,7 @@ - int i; - int found = 0; - -- for (i = 0; i < NUMBER_OF_PORTS; i++) -+ for (i = 0; i < NUMBER_OF_PORTS; i++) - { - sync_port *port = &ports[i]; - -@@ -1164,17 +1264,17 @@ - if (masked.data) /* Descriptor interrupt */ - { - found = 1; -- while (REG_RD(dma, port->regi_dmain, rw_data) != -+ while (REG_RD(dma, port->regi_dmain, rw_data) != - virt_to_phys(port->next_rx_desc)) { -- -+ DEBUGRXINT(printk("!")); - if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) { - int first_size = port->flip + port->in_buffer_size - port->writep; - memcpy((char*)port->writep, phys_to_virt((unsigned)port->next_rx_desc->buf), first_size); - memcpy(port->flip, phys_to_virt((unsigned)port->next_rx_desc->buf+first_size), port->inbufchunk - first_size); - port->writep = port->flip + port->inbufchunk - first_size; - } else { -- memcpy((char*)port->writep, -- phys_to_virt((unsigned)port->next_rx_desc->buf), -+ memcpy((char*)port->writep, -+ phys_to_virt((unsigned)port->next_rx_desc->buf), - port->inbufchunk); - port->writep += port->inbufchunk; - if (port->writep >= port->flip + port->in_buffer_size) -@@ -1184,11 +1284,13 @@ - { - port->full = 1; - } -- -- port->next_rx_desc->eol = 0; -- port->prev_rx_desc->eol = 1; -- port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc); -+ -+ port->next_rx_desc->eol = 1; -+ port->prev_rx_desc->eol = 0; -+ flush_dma_descr(port->prev_rx_desc,0); // Cache bug workaround -+ port->prev_rx_desc = port->next_rx_desc; - port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next); -+ flush_dma_descr(port->prev_rx_desc,1); // Cache bug workaround - wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */ - DMA_CONTINUE(port->regi_dmain); - REG_WR(dma, port->regi_dmain, rw_ack_intr, ack_intr); -@@ -1201,7 +1303,7 @@ - #endif /* SYNC_SER_DMA */ - - #ifdef SYNC_SER_MANUAL --static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs) -+static irqreturn_t manual_interrupt(int irq, void *dev_id) - { - int i; - int found = 0; -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/Makefile 2006-12-06 14:17:02.000000000 +0100 -@@ -1,4 +1,4 @@ --# $Id: Makefile,v 1.11 2004/12/17 10:16:13 starvik Exp $ -+# $Id: Makefile,v 1.13 2006/12/06 13:17:02 starvik Exp $ - # - # Makefile for the linux kernel. - # -@@ -8,7 +8,7 @@ - - obj-y := entry.o traps.o irq.o debugport.o dma.o pinmux.o \ - process.o ptrace.o setup.o signal.o traps.o time.o \ -- arbiter.o io.o -+ arbiter.o io.o cache.o cacheflush.o - - obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o - -@@ -16,6 +16,7 @@ - obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o - obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o - obj-$(CONFIG_MODULES) += crisksyms.o -+obj-$(CONFIG_CPU_FREQ) += cpufreq.o - - clean: - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/arbiter.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/arbiter.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/arbiter.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/arbiter.c 2006-10-13 14:43:13.000000000 +0200 -@@ -6,7 +6,7 @@ - * bandwidth (e.g. ethernet) and then the remaining slots are divided - * on all the active clients. - * -- * Copyright (c) 2004, 2005 Axis Communications AB. -+ * Copyright (c) 2004, 2005, 2006 Axis Communications AB. - */ - - #include -@@ -44,35 +44,88 @@ - {regi_marb_bp3} - }; - --static int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS]; --static int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS]; -+static u8 requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS]; -+static u8 active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS]; - static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH}; - - DEFINE_SPINLOCK(arbiter_lock); - --static irqreturn_t -+static irqreturn_t - crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs); - --static void crisv32_arbiter_config(int region) -+/* -+ * "I'm the arbiter, I know the score. -+ * From square one I'll be watching all 64." -+ * (memory arbiter slots, that is) -+ * -+ * Or in other words: -+ * Program the memory arbiter slots for "region" according to what's -+ * in requested_slots[] and active_clients[], while minimizing -+ * latency. A caller may pass a non-zero positive amount for -+ * "unused_slots", which must then be the unallocated, remaining -+ * number of slots, free to hand out to any client. -+ */ -+ -+static void crisv32_arbiter_config(int region, int unused_slots) - { - int slot; - int client; - int interval = 0; -- int val[NBR_OF_SLOTS]; -+ -+ /* -+ * This vector corresponds to the hardware arbiter slots (see -+ * the hardware documentation for semantics). We initialize -+ * each slot with a suitable sentinel value outside the valid -+ * range {0 .. NBR_OF_CLIENTS - 1} and replace them with -+ * client indexes. Then it's fed to the hardware. -+ */ -+ s8 val[NBR_OF_SLOTS]; - - for (slot = 0; slot < NBR_OF_SLOTS; slot++) -- val[slot] = NBR_OF_CLIENTS + 1; -+ val[slot] = -1; - - for (client = 0; client < NBR_OF_CLIENTS; client++) - { - int pos; -+ /* Allocate the requested non-zero number of slots, but -+ * also give clients with zero-requests one slot each -+ * while stocks last. We do the latter here, in client -+ * order. This makes sure zero-request clients are the -+ * first to get to any spare slots, else those slots -+ * could, when bandwidth is allocated close to the limit, -+ * all be allocated to low-index non-zero-request clients -+ * in the default-fill loop below. Another positive but -+ * secondary effect is a somewhat better spread of the -+ * zero-bandwidth clients in the vector, avoiding some of -+ * the latency that could otherwise be caused by the -+ * partitioning of non-zero-bandwidth clients at low -+ * indexes and zero-bandwidth clients at high -+ * indexes. (Note that this spreading can only affect the -+ * unallocated bandwidth.) All the above only matters for -+ * memory-intensive situations, of course. -+ */ - if (!requested_slots[region][client]) -- continue; -- interval = NBR_OF_SLOTS / requested_slots[region][client]; -+ { -+ /* -+ * Skip inactive clients. Also skip zero-slot -+ * allocations in this pass when there are no known -+ * free slots. -+ */ -+ if (!active_clients[region][client] || unused_slots <= 0) -+ continue; -+ -+ unused_slots--; -+ -+ /* Only allocate one slot for this client. */ -+ interval = NBR_OF_SLOTS; -+ } -+ else -+ interval = NBR_OF_SLOTS / requested_slots[region][client]; -+ - pos = 0; - while (pos < NBR_OF_SLOTS) - { -- if (val[pos] != NBR_OF_CLIENTS + 1) -+ if (val[pos] >= 0) - pos++; - else - { -@@ -85,7 +138,13 @@ - client = 0; - for (slot = 0; slot < NBR_OF_SLOTS; slot++) - { -- if (val[slot] == NBR_OF_CLIENTS + 1) -+ /* -+ * Allocate remaining slots in round-robin -+ * client-number order for active clients. For this -+ * pass, we ignore requested bandwidth and previous -+ * allocations. -+ */ -+ if (val[slot] < 0) - { - int first = client; - while(!active_clients[region][client]) { -@@ -100,7 +159,7 @@ - REG_WR_INT_VECT(marb, regi_marb, rw_ext_slots, slot, val[slot]); - else if (region == INT_REGION) - REG_WR_INT_VECT(marb, regi_marb, rw_int_slots, slot, val[slot]); -- } -+ } - } - - extern char _stext, _etext; -@@ -111,18 +170,28 @@ - - if (initialized) - return; -- -+ - initialized = 1; - -- /* CPU caches are active. */ -- active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1; -- crisv32_arbiter_config(EXT_REGION); -- crisv32_arbiter_config(INT_REGION); -+ /* -+ * CPU caches are always set to active, but with zero -+ * bandwidth allocated. It should be ok to allocate zero -+ * bandwidth for the caches, because DMA for other channels -+ * will supposedly finish, once their programmed amount is -+ * done, and then the caches will get access according to the -+ * "fixed scheme" for unclaimed slots. Though, if for some -+ * use-case somewhere, there's a maximum CPU latency for -+ * e.g. some interrupt, we have to start allocating specific -+ * bandwidth for the CPU caches too. -+ */ -+ active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1; -+ crisv32_arbiter_config(EXT_REGION, 0); -+ crisv32_arbiter_config(INT_REGION, 0); - - if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, IRQF_DISABLED, - "arbiter", NULL)) - printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); -- -+ - #ifndef CONFIG_ETRAX_KGDB - /* Global watch for writes to kernel text segment. */ - crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext, -@@ -130,6 +199,7 @@ - #endif - } - -+/* Main entry for bandwidth allocation. */ - - - int crisv32_arbiter_allocate_bandwidth(int client, int region, -@@ -141,39 +211,76 @@ - int req; - - crisv32_arbiter_init(); -- -+ - for (i = 0; i < NBR_OF_CLIENTS; i++) - { - total_assigned += requested_slots[region][i]; - total_clients += active_clients[region][i]; - } -- req = NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth); - -- if (total_assigned + total_clients + req + 1 > NBR_OF_SLOTS) -+ /* Avoid division by 0 for 0-bandwidth requests. */ -+ req = bandwidth == 0 -+ ? 0 : NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth); -+ -+ /* -+ * We make sure that there are enough slots only for non-zero -+ * requests. Requesting 0 bandwidth *may* allocate slots, -+ * though if all bandwidth is allocated, such a client won't -+ * get any and will have to rely on getting memory access -+ * according to the fixed scheme that's the default when one -+ * of the slot-allocated clients doesn't claim their slot. -+ */ -+ if (total_assigned + req > NBR_OF_SLOTS) - return -ENOMEM; - - active_clients[region][client] = 1; - requested_slots[region][client] = req; -- crisv32_arbiter_config(region); -+ crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned); - - return 0; - } - -+/* -+ * Main entry for bandwidth deallocation. -+ * -+ * Strictly speaking, for a somewhat constant set of clients where -+ * each client gets a constant bandwidth and is just enabled or -+ * disabled (somewhat dynamically), no action is necessary here to -+ * avoid starvation for non-zero-allocation clients, as the allocated -+ * slots will just be unused. However, handing out those unused slots -+ * to active clients avoids needless latency if the "fixed scheme" -+ * would give unclaimed slots to an eager low-index client. -+ */ -+ -+void crisv32_arbiter_deallocate_bandwidth(int client, int region) -+{ -+ int i; -+ int total_assigned = 0; -+ -+ requested_slots[region][client] = 0; -+ active_clients[region][client] = 0; -+ -+ for (i = 0; i < NBR_OF_CLIENTS; i++) -+ total_assigned += requested_slots[region][i]; -+ -+ crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned); -+} -+ - int crisv32_arbiter_watch(unsigned long start, unsigned long size, - unsigned long clients, unsigned long accesses, - watch_callback* cb) - { - int i; -- -+ - crisv32_arbiter_init(); -- -+ - if (start > 0x80000000) { - printk("Arbiter: %lX doesn't look like a physical address", start); - return -EFAULT; - } - - spin_lock(&arbiter_lock); -- -+ - for (i = 0; i < NUMBER_OF_BP; i++) { - if (!watches[i].used) { - reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask); -@@ -214,7 +321,7 @@ - crisv32_arbiter_init(); - - spin_lock(&arbiter_lock); -- -+ - if ((id < 0) || (id >= NUMBER_OF_BP) || (!watches[id].used)) { - spin_unlock(&arbiter_lock); - return -EINVAL; -@@ -239,7 +346,7 @@ - - extern void show_registers(struct pt_regs *regs); - --static irqreturn_t -+static irqreturn_t - crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs) - { - reg_marb_r_masked_intr masked_intr = REG_RD(marb, regi_marb, r_masked_intr); -@@ -248,10 +355,10 @@ - reg_marb_bp_r_brk_op r_op; - reg_marb_bp_r_brk_first_client r_first; - reg_marb_bp_r_brk_size r_size; -- reg_marb_bp_rw_ack ack = {0}; -+ reg_marb_bp_rw_ack ack = {0}; - reg_marb_rw_ack_intr ack_intr = {.bp0=1,.bp1=1,.bp2=1,.bp3=1}; - struct crisv32_watch_entry* watch; -- -+ - if (masked_intr.bp0) { - watch = &watches[0]; - ack_intr.bp0 = regk_marb_yes; -@@ -291,6 +398,6 @@ - if (watch->cb) - watch->cb(); - -- -+ - return IRQ_HANDLED; - } -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/asm-offsets.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/asm-offsets.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/asm-offsets.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/asm-offsets.c 2003-06-02 10:39:38.000000000 +0200 -@@ -16,8 +16,8 @@ - { - #define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry)) - ENTRY(orig_r10); -- ENTRY(r13); -- ENTRY(r12); -+ ENTRY(r13); -+ ENTRY(r12); - ENTRY(r11); - ENTRY(r10); - ENTRY(r9); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cache.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cache.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cache.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cache.c 2007-01-23 13:09:57.000000000 +0100 -@@ -0,0 +1,31 @@ -+#include -+#include -+#include -+#include -+ -+// This file is used to workaround a cache bug, Guinness TR 106 -+ -+inline void flush_dma_descr(dma_descr_data* descr, int flush_buf) -+{ -+ // Flush descriptor to make sure we get correct in_eop and after -+ asm volatile ("ftagd [%0]" :: "r" (descr)); -+ // Flush buffer pointed out by descriptor -+ if (flush_buf) -+ cris_flush_cache_range(phys_to_virt((unsigned)descr->buf), (unsigned)(descr->after - descr->buf)); -+} -+ -+void flush_dma_list(dma_descr_data* descr) -+{ -+ while(1) -+ { -+ flush_dma_descr(descr, 1); -+ if (descr->eol) -+ break; -+ descr = phys_to_virt((unsigned)descr->next); -+ } -+} -+ -+EXPORT_SYMBOL(flush_dma_list); -+EXPORT_SYMBOL(flush_dma_descr); -+EXPORT_SYMBOL(cris_flush_cache); -+EXPORT_SYMBOL(cris_flush_cache_range); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cacheflush.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cacheflush.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cacheflush.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cacheflush.S 2006-12-06 14:17:02.000000000 +0100 -@@ -0,0 +1,93 @@ -+ .global cris_flush_cache_range -+cris_flush_cache_range: -+ move.d 1024, $r12 -+ cmp.d $r11, $r12 -+ bhi cris_flush_1KB -+ nop -+ add.d $r10, $r11 -+cris_flush_last: -+ addq 32, $r10 -+ cmp.d $r11, $r10 -+ blt cris_flush_last -+ ftagd [$r10] -+ ret -+ nop -+cris_flush_1KB: -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ftagd [$r10] -+ addq 32, $r10 -+ ba cris_flush_cache_range -+ sub.d $r12, $r11 -+ -+ .global cris_flush_cache -+cris_flush_cache: -+ moveq 0, $r10 -+cris_flush_line: -+ move.d 16*1024, $r11 -+ addq 16, $r10 -+ cmp.d $r10, $r11 -+ blt cris_flush_line -+ fidxd [$r10] -+ ret -+ nop -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cpufreq.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cpufreq.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cpufreq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cpufreq.c 2006-11-03 11:35:52.000000000 +0100 -@@ -0,0 +1,147 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static int -+cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, void *data); -+ -+static struct notifier_block cris_sdram_freq_notifier_block = { -+ .notifier_call = cris_sdram_freq_notifier -+}; -+ -+static struct cpufreq_frequency_table cris_freq_table[] = { -+ {0x01, 6000}, -+ {0x02, 200000}, -+ {0, CPUFREQ_TABLE_END}, -+}; -+ -+static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) -+{ -+ reg_config_rw_clk_ctrl clk_ctrl; -+ clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); -+ return clk_ctrl.pll ? 200000 : 6000; -+} -+ -+static void cris_freq_set_cpu_state (unsigned int state) -+{ -+ int i; -+ struct cpufreq_freqs freqs; -+ reg_config_rw_clk_ctrl clk_ctrl; -+ clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); -+ -+ for_each_cpu(i) { -+ freqs.old = cris_freq_get_cpu_frequency(i); -+ freqs.new = cris_freq_table[state].frequency; -+ freqs.cpu = i; -+ } -+ -+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); -+ -+ local_irq_disable(); -+ -+ // Even though we may be SMP they will share the same clock -+ // so all settings are made on CPU0. -+ if (cris_freq_table[state].frequency == 200000) -+ clk_ctrl.pll = 1; -+ else -+ clk_ctrl.pll = 0; -+ REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl); -+ -+ local_irq_enable(); -+ -+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -+}; -+ -+static int cris_freq_verify (struct cpufreq_policy *policy) -+{ -+ return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]); -+} -+ -+static int cris_freq_target (struct cpufreq_policy *policy, -+ unsigned int target_freq, -+ unsigned int relation) -+{ -+ unsigned int newstate = 0; -+ -+ if (cpufreq_frequency_table_target(policy, cris_freq_table, target_freq, relation, &newstate)) -+ return -EINVAL; -+ -+ cris_freq_set_cpu_state(newstate); -+ -+ return 0; -+} -+ -+static int cris_freq_cpu_init(struct cpufreq_policy *policy) -+{ -+ int result; -+ -+ /* cpuinfo and default policy values */ -+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR; -+ policy->cpuinfo.transition_latency = 1000000; /* 1ms */ -+ policy->cur = cris_freq_get_cpu_frequency(0); -+ -+ result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table); -+ if (result) -+ return (result); -+ -+ cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu); -+ -+ return 0; -+} -+ -+ -+static int cris_freq_cpu_exit(struct cpufreq_policy *policy) -+{ -+ cpufreq_frequency_table_put_attr(policy->cpu); -+ return 0; -+} -+ -+ -+static struct freq_attr* cris_freq_attr[] = { -+ &cpufreq_freq_attr_scaling_available_freqs, -+ NULL, -+}; -+ -+static struct cpufreq_driver cris_freq_driver = { -+ .get = cris_freq_get_cpu_frequency, -+ .verify = cris_freq_verify, -+ .target = cris_freq_target, -+ .init = cris_freq_cpu_init, -+ .exit = cris_freq_cpu_exit, -+ .name = "cris_freq", -+ .owner = THIS_MODULE, -+ .attr = cris_freq_attr, -+}; -+ -+static int __init cris_freq_init(void) -+{ -+ int ret; -+ ret = cpufreq_register_driver(&cris_freq_driver); -+ cpufreq_register_notifier(&cris_sdram_freq_notifier_block, -+ CPUFREQ_TRANSITION_NOTIFIER); -+ return ret; -+} -+ -+static int -+cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, void *data) -+{ -+ int i; -+ struct cpufreq_freqs *freqs = data; -+ if (val == CPUFREQ_PRECHANGE) { -+ reg_bif_core_rw_sdram_timing timing = -+ REG_RD(bif_core, regi_bif_core, rw_sdram_timing); -+ timing.cpd = (freqs->new == 200000 ? 0 : 1); -+ -+ if (freqs->new == 200000) -+ for (i = 0; i < 50000; i++); -+ REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing); -+ } -+ return 0; -+} -+ -+ -+module_init(cris_freq_init); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/crisksyms.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/crisksyms.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/crisksyms.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/crisksyms.c 2006-11-21 04:21:34.000000000 +0100 -@@ -3,6 +3,7 @@ - #include - #include - #include -+#include - - /* Functions for allocating DMA channels */ - EXPORT_SYMBOL(crisv32_request_dma); -@@ -16,7 +17,11 @@ - - /* Functions for handling pinmux */ - EXPORT_SYMBOL(crisv32_pinmux_alloc); -+EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed); - EXPORT_SYMBOL(crisv32_pinmux_dealloc); -+EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed); -+EXPORT_SYMBOL(crisv32_io_get_name); -+EXPORT_SYMBOL(crisv32_io_get); - - /* Functions masking/unmasking interrupts */ - EXPORT_SYMBOL(mask_irq); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/debugport.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/debugport.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/debugport.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/debugport.c 2006-10-13 14:43:13.000000000 +0200 -@@ -4,18 +4,13 @@ - - #include - #include --#include --#include --#include - #include --#include -+#include -+#include - #include - #include - #include - --#include --#include -- - struct dbg_port - { - unsigned char nbr; -@@ -26,7 +21,7 @@ - unsigned int bits; - }; - --struct dbg_port ports[] = -+struct dbg_port ports[] = - { - { - 0, -@@ -89,15 +84,6 @@ - #endif - #endif - --#ifdef CONFIG_ETRAXFS_SIM --extern void print_str( const char *str ); --static char buffer[1024]; --static char msg[] = "Debug: "; --static int buffer_pos = sizeof(msg) - 1; --#endif -- --extern struct tty_driver *serial_driver; -- - static void - start_port(struct dbg_port* p) - { -@@ -118,7 +104,7 @@ - /* Set up serial port registers */ - reg_ser_rw_tr_ctrl tr_ctrl = {0}; - reg_ser_rw_tr_dma_en tr_dma_en = {0}; -- -+ - reg_ser_rw_rec_ctrl rec_ctrl = {0}; - reg_ser_rw_tr_baud_div tr_baud_div = {0}; - reg_ser_rw_rec_baud_div rec_baud_div = {0}; -@@ -148,6 +134,7 @@ - tr_ctrl.data_bits = regk_ser_bits7; - rec_ctrl.data_bits = regk_ser_bits7; - } -+ - - REG_WR (ser, p->instance, rw_tr_baud_div, tr_baud_div); - REG_WR (ser, p->instance, rw_rec_baud_div, rec_baud_div); -@@ -156,124 +143,21 @@ - REG_WR (ser, p->instance, rw_rec_ctrl, rec_ctrl); - } - --/* No debug */ --#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL -- --static void --console_write(struct console *co, const char *buf, unsigned int len) --{ -- return; --} -- --/* Target debug */ --#elif !defined(CONFIG_ETRAXFS_SIM) -- --static void --console_write_direct(struct console *co, const char *buf, unsigned int len) --{ -- int i; -- reg_ser_r_stat_din stat; -- reg_ser_rw_tr_dma_en tr_dma_en, old; -- -- /* Switch to manual mode */ -- tr_dma_en = old = REG_RD (ser, port->instance, rw_tr_dma_en); -- if (tr_dma_en.en == regk_ser_yes) { -- tr_dma_en.en = regk_ser_no; -- REG_WR(ser, port->instance, rw_tr_dma_en, tr_dma_en); -- } -- -- /* Send data */ -- for (i = 0; i < len; i++) { -- /* LF -> CRLF */ -- if (buf[i] == '\n') { -- do { -- stat = REG_RD (ser, port->instance, r_stat_din); -- } while (!stat.tr_rdy); -- REG_WR_INT (ser, port->instance, rw_dout, '\r'); -- } -- /* Wait until transmitter is ready and send.*/ -- do { -- stat = REG_RD (ser, port->instance, r_stat_din); -- } while (!stat.tr_rdy); -- REG_WR_INT (ser, port->instance, rw_dout, buf[i]); -- } -- -- /* Restore mode */ -- if (tr_dma_en.en != old.en) -- REG_WR(ser, port->instance, rw_tr_dma_en, old); --} -- --static void --console_write(struct console *co, const char *buf, unsigned int len) --{ -- if (!port) -- return; -- console_write_direct(co, buf, len); --} -- -- -- --#else -- --/* VCS debug */ -- --static void --console_write(struct console *co, const char *buf, unsigned int len) --{ -- char* pos; -- pos = memchr(buf, '\n', len); -- if (pos) { -- int l = ++pos - buf; -- memcpy(buffer + buffer_pos, buf, l); -- memcpy(buffer, msg, sizeof(msg) - 1); -- buffer[buffer_pos + l] = '\0'; -- print_str(buffer); -- buffer_pos = sizeof(msg) - 1; -- if (pos - buf != len) { -- memcpy(buffer + buffer_pos, pos, len - l); -- buffer_pos += len - l; -- } -- } else { -- memcpy(buffer + buffer_pos, buf, len); -- buffer_pos += len; -- } --} -- --#endif -- --int raw_printk(const char *fmt, ...) --{ -- static char buf[1024]; -- int printed_len; -- va_list args; -- va_start(args, fmt); -- printed_len = vsnprintf(buf, sizeof(buf), fmt, args); -- va_end(args); -- console_write(NULL, buf, strlen(buf)); -- return printed_len; --} -- --void --stupid_debug(char* buf) --{ -- console_write(NULL, buf, strlen(buf)); --} -- - #ifdef CONFIG_ETRAX_KGDB - /* Use polling to get a single character from the kernel debug port */ - int - getDebugChar(void) - { -- reg_ser_rs_status_data stat; -+ reg_ser_rs_stat_din stat; - reg_ser_rw_ack_intr ack_intr = { 0 }; - - do { -- stat = REG_RD(ser, kgdb_instance, rs_status_data); -- } while (!stat.data_avail); -+ stat = REG_RD(ser, kgdb_port->instance, rs_stat_din); -+ } while (!stat.dav); - - /* Ack the data_avail interrupt. */ -- ack_intr.data_avail = 1; -- REG_WR(ser, kgdb_instance, rw_ack_intr, ack_intr); -+ ack_intr.dav = 1; -+ REG_WR(ser, kgdb_port->instance, rw_ack_intr, ack_intr); - - return stat.data; - } -@@ -282,173 +166,18 @@ - void - putDebugChar(int val) - { -- reg_ser_r_status_data stat; -+ reg_ser_r_stat_din stat; - do { -- stat = REG_RD (ser, kgdb_instance, r_status_data); -- } while (!stat.tr_ready); -- REG_WR (ser, kgdb_instance, rw_data_out, REG_TYPE_CONV(reg_ser_rw_data_out, int, val)); -+ stat = REG_RD (ser, kgdb_port->instance, r_stat_din); -+ } while (!stat.tr_rdy); -+ REG_WR_INT (ser, kgdb_port->instance, rw_dout, val); - } - #endif /* CONFIG_ETRAX_KGDB */ - --static int __init --console_setup(struct console *co, char *options) --{ -- char* s; -- -- if (options) { -- port = &ports[co->index]; -- port->baudrate = 115200; -- port->parity = 'N'; -- port->bits = 8; -- port->baudrate = simple_strtoul(options, NULL, 10); -- s = options; -- while(*s >= '0' && *s <= '9') -- s++; -- if (*s) port->parity = *s++; -- if (*s) port->bits = *s++ - '0'; -- port->started = 0; -- start_port(port); -- } -- return 0; --} -- --/* This is a dummy serial device that throws away anything written to it. -- * This is used when no debug output is wanted. -- */ --static struct tty_driver dummy_driver; -- --static int dummy_open(struct tty_struct *tty, struct file * filp) --{ -- return 0; --} -- --static void dummy_close(struct tty_struct *tty, struct file * filp) --{ --} -- --static int dummy_write(struct tty_struct * tty, -- const unsigned char *buf, int count) --{ -- return count; --} -- --static int --dummy_write_room(struct tty_struct *tty) --{ -- return 8192; --} -- --void __init --init_dummy_console(void) --{ -- memset(&dummy_driver, 0, sizeof(struct tty_driver)); -- dummy_driver.driver_name = "serial"; -- dummy_driver.name = "ttyS"; -- dummy_driver.major = TTY_MAJOR; -- dummy_driver.minor_start = 68; -- dummy_driver.num = 1; /* etrax100 has 4 serial ports */ -- dummy_driver.type = TTY_DRIVER_TYPE_SERIAL; -- dummy_driver.subtype = SERIAL_TYPE_NORMAL; -- dummy_driver.init_termios = tty_std_termios; -- dummy_driver.init_termios.c_cflag = -- B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ -- dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; -- -- dummy_driver.open = dummy_open; -- dummy_driver.close = dummy_close; -- dummy_driver.write = dummy_write; -- dummy_driver.write_room = dummy_write_room; -- if (tty_register_driver(&dummy_driver)) -- panic("Couldn't register dummy serial driver\n"); --} -- --static struct tty_driver* --crisv32_console_device(struct console* co, int *index) --{ -- if (port) -- *index = port->nbr; -- return port ? serial_driver : &dummy_driver; --} -- --static struct console sercons = { -- name : "ttyS", -- write: console_write, -- read : NULL, -- device : crisv32_console_device, -- unblank : NULL, -- setup : console_setup, -- flags : CON_PRINTBUFFER, -- index : -1, -- cflag : 0, -- next : NULL --}; --static struct console sercons0 = { -- name : "ttyS", -- write: console_write, -- read : NULL, -- device : crisv32_console_device, -- unblank : NULL, -- setup : console_setup, -- flags : CON_PRINTBUFFER, -- index : 0, -- cflag : 0, -- next : NULL --}; -- --static struct console sercons1 = { -- name : "ttyS", -- write: console_write, -- read : NULL, -- device : crisv32_console_device, -- unblank : NULL, -- setup : console_setup, -- flags : CON_PRINTBUFFER, -- index : 1, -- cflag : 0, -- next : NULL --}; --static struct console sercons2 = { -- name : "ttyS", -- write: console_write, -- read : NULL, -- device : crisv32_console_device, -- unblank : NULL, -- setup : console_setup, -- flags : CON_PRINTBUFFER, -- index : 2, -- cflag : 0, -- next : NULL --}; --static struct console sercons3 = { -- name : "ttyS", -- write: console_write, -- read : NULL, -- device : crisv32_console_device, -- unblank : NULL, -- setup : console_setup, -- flags : CON_PRINTBUFFER, -- index : 3, -- cflag : 0, -- next : NULL --}; -- - /* Register console for printk's, etc. */ - int __init - init_etrax_debug(void) - { -- static int first = 1; -- -- if (!first) { -- unregister_console(&sercons); -- register_console(&sercons0); -- register_console(&sercons1); -- register_console(&sercons2); -- register_console(&sercons3); -- init_dummy_console(); -- return 0; -- } -- first = 0; -- register_console(&sercons); - start_port(port); - - #ifdef CONFIG_ETRAX_KGDB -@@ -456,5 +185,3 @@ - #endif /* CONFIG_ETRAX_KGDB */ - return 0; - } -- --__initcall(init_etrax_debug); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/dma.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/dma.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/dma.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/dma.c 2007-02-02 08:45:22.000000000 +0100 -@@ -12,6 +12,16 @@ - #include - #include - -+/* -+ * The memory region we allocated bandwidth for is stored in -+ * used_dma_channels as an in-use flag. -+ */ -+enum dma_region_allocated_marker { -+ DMA_NO_REGION_ALLOCATED = 0, -+ DMA_INT_REGION_ALLOCATED = 1, -+ DMA_EXT_REGION_ALLOCATED = 2 -+}; -+ - static char used_dma_channels[MAX_DMA_CHANNELS]; - static const char * used_dma_channels_users[MAX_DMA_CHANNELS]; - -@@ -74,7 +84,7 @@ - if (options & DMA_VERBOSE_ON_ERROR) { - printk("Failed to request DMA %i for %s, only 0-%i valid)\n", dmanr, device_id, MAX_DMA_CHANNELS-1); - } -- -+ - if (options & DMA_PANIC_ON_ERROR) - panic("request_dma error!"); - return -EINVAL; -@@ -202,13 +212,14 @@ - if (dmanr == 3) - strmux_cfg.dma3 = regk_strmux_ext3; - else if (dmanr == 9) -- strmux_cfg.dma9 = regk_strmux_ext2; -+ strmux_cfg.dma9 = regk_strmux_ext3; - else -- panic("Invalid DMA channel for ext2\n"); -+ panic("Invalid DMA channel for ext3\n"); - break; - } - -- used_dma_channels[dmanr] = 1; -+ used_dma_channels[dmanr] = options & DMA_INT_MEM -+ ? DMA_INT_REGION_ALLOCATED : DMA_EXT_REGION_ALLOCATED; - used_dma_channels_users[dmanr] = device_id; - REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl); - REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); -@@ -218,7 +229,12 @@ - - void crisv32_free_dma(unsigned int dmanr) - { -+ int region; -+ - spin_lock(&dma_lock); -+ region = used_dma_channels[dmanr] == DMA_INT_REGION_ALLOCATED -+ ? INT_REGION : EXT_REGION; - used_dma_channels[dmanr] = 0; -+ crisv32_arbiter_deallocate_bandwidth(dmanr, region); - spin_unlock(&dma_lock); - } -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/entry.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/entry.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/entry.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/entry.S 2007-01-09 10:29:19.000000000 +0100 -@@ -11,7 +11,7 @@ - * - * Stack layout in 'ret_from_system_call': - * ptrace needs to have all regs on the stack. -- * if the order here is changed, it needs to be -+ * if the order here is changed, it needs to be - * updated in fork.c:copy_process, signal.c:do_signal, - * ptrace.c and ptrace.h - * -@@ -40,7 +40,7 @@ - .globl sys_call_table - - ; Check if preemptive kernel scheduling should be done. --#ifdef CONFIG_PREEMPT -+#ifdef CONFIG_PREEMPT - _resume_kernel: - di - ; Load current task struct. -@@ -81,7 +81,7 @@ - nop - ba ret_from_sys_call - nop -- -+ - ret_from_intr: - ;; Check for resched if preemptive kernel, or if we're going back to - ;; user-mode. This test matches the user_regs(regs) macro. Don't simply -@@ -93,7 +93,7 @@ - bpl _resume_kernel - - ; Note that di below is in delay slot. -- -+ - _resume_userspace: - di ; So need_resched and sigpending don't change. - -@@ -107,19 +107,19 @@ - nop - ba _Rexit - nop -- -+ - ;; The system_call is called by a BREAK instruction, which looks pretty - ;; much like any other exception. - ;; - ;; System calls can't be made from interrupts but we still stack ERP - ;; to have a complete stack frame. -- ;; -+ ;; - ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12, - ;; r13,mof,srp - ;; - ;; This function looks on the _surface_ like spaghetti programming, but it's -- ;; really designed so that the fast-path does not force cache-loading of -- ;; non-used instructions. Only the non-common cases cause the outlined code -+ ;; really designed so that the fast-path does not force cache-loading of -+ ;; non-used instructions. Only the non-common cases cause the outlined code - ;; to run.. - - system_call: -@@ -151,7 +151,7 @@ - or.d (1<<9), $r0 - move $r0, $ccs - #endif -- -+ - movs.w -ENOSYS, $r0 - addoq +PT_r10, $sp, $acr - move.d $r0, [$acr] -@@ -166,9 +166,9 @@ - bmi _syscall_trace_entry - nop - --_syscall_traced: -+_syscall_traced: - ;; Check for sanity in the requested syscall number. -- cmpu.w NR_syscalls, $r9 -+ cmpu.w NR_syscalls, $r9 - bhs ret_from_sys_call - lslq 2, $r9 ; Multiply by 4, in the delay slot. - -@@ -177,7 +177,7 @@ - move.d $sp, $r0 - subq 4, $sp - move.d $r0, [$sp] -- -+ - ;; The registers carrying parameters (R10-R13) are intact. The optional - ;; fifth and sixth parameters is in MOF and SRP respectivly. Put them - ;; back on the stack. -@@ -185,33 +185,33 @@ - move $srp, [$sp] - subq 4, $sp - move $mof, [$sp] -- -+ - ;; Actually to the system call. - addo.d +sys_call_table, $r9, $acr - move.d [$acr], $acr - jsr $acr - nop -- -+ - addq 3*4, $sp ; Pop the mof, srp and regs parameters. - addoq +PT_r10, $sp, $acr - move.d $r10, [$acr] ; Save the return value. - -- moveq 1, $r9 ; "Parameter" to ret_from_sys_call to -+ moveq 1, $r9 ; "Parameter" to ret_from_sys_call to - ; show it was a sys call. -- -+ - ;; Fall through into ret_from_sys_call to return. -- -+ - ret_from_sys_call: - ;; R9 is a parameter: - ;; >= 1 from syscall - ;; 0 from irq -- -+ - ;; Get the current task-struct pointer. -- movs.w -8192, $r0 ; THREAD_SIZE == 8192 -+ movs.w -8192, $r0 ; THREAD_SIZE == 8192 - and.d $sp, $r0 - - di ; Make sure need_resched and sigpending don't change. -- -+ - addoq +TI_flags, $r0, $acr - move.d [$acr], $r1 - and.d _TIF_ALLWORK_MASK, $r1 -@@ -253,14 +253,14 @@ - move.d $r1, $r9 - ba _resume_userspace - nop -- -+ - _work_pending: - addoq +TI_flags, $r0, $acr - move.d [$acr], $r10 - btstq TIF_NEED_RESCHED, $r10 ; Need resched? - bpl _work_notifysig ; No, must be signal/notify. - nop -- -+ - _work_resched: - move.d $r9, $r1 ; Preserve R9. - jsr schedule -@@ -281,28 +281,26 @@ - ;; Deal with pending signals and notify-resume requests. - - addoq +TI_flags, $r0, $acr -- move.d [$acr], $r13 ; The thread_info_flags parameter. -- move.d $r9, $r10 ; do_notify_resume syscall/irq param. -- moveq 0, $r11 ; oldset param - 0 in this case. -- move.d $sp, $r12 ; The regs param. -+ move.d [$acr], $r12 ; The thread_info_flags parameter. -+ move.d $sp, $r11 ; The regs param. - jsr do_notify_resume -- nop -- -+ move.d $r9, $r10 ; do_notify_resume syscall/irq param. -+ - ba _Rexit - nop - - ;; We get here as a sidetrack when we've entered a syscall with the - ;; trace-bit set. We need to call do_syscall_trace and then continue - ;; with the call. -- -+ - _syscall_trace_entry: - ;; PT_r10 in the frame contains -ENOSYS as required, at this point. -- -+ - jsr do_syscall_trace - nop - - ;; Now re-enter the syscall code to do the syscall itself. We need to -- ;; restore R9 here to contain the wanted syscall, and the other -+ ;; restore R9 here to contain the wanted syscall, and the other - ;; parameter-bearing registers. - addoq +PT_r9, $sp, $acr - move.d [$acr], $r9 -@@ -318,10 +316,10 @@ - move [$acr], $mof - addoq +PT_srp, $sp, $acr - move [$acr], $srp -- -+ - ba _syscall_traced - nop -- -+ - ;; Resume performs the actual task-switching, by switching stack - ;; pointers. Input arguments are: - ;; -@@ -331,7 +329,7 @@ - ;; - ;; Returns old current in R10. - --resume: -+resume: - subq 4, $sp - move $srp, [$sp] ; Keep old/new PC on the stack. - add.d $r12, $r10 ; R10 = current tasks tss. -@@ -341,14 +339,14 @@ - - addoq +THREAD_usp, $r10, $acr - move $usp, [$acr] ; Save user-mode stackpointer. -- -+ - ;; See copy_thread for the reason why register R9 is saved. - subq 10*4, $sp - movem $r9, [$sp] ; Save non-scratch registers and R9. -- -+ - addoq +THREAD_ksp, $r10, $acr - move.d $sp, [$acr] ; Save kernel SP for old task. -- -+ - move.d $sp, $r10 ; Return last running task in R10. - and.d -8192, $r10 ; Get thread_info from stackpointer. - addoq +TI_task, $r10, $acr -@@ -360,7 +358,7 @@ - - addoq +THREAD_usp, $r11, $acr - move [$acr], $usp ; Restore user-mode stackpointer. -- -+ - addoq +THREAD_ccs, $r11, $acr - move [$acr], $ccs ; Restore IRQ enable status. - move.d [$sp+], $acr -@@ -407,7 +405,7 @@ - movem [$sp+], $r13 - move.d [$sp+], $acr - move [$sp], $srs -- addq 4, $sp -+ addq 4, $sp - move [$sp+], $mof - move [$sp+], $spc - move [$sp+], $ccs -@@ -419,7 +417,7 @@ - - .comm cause_of_death, 4 ;; Don't declare this anywhere. - --spurious_interrupt: -+spurious_interrupt: - di - jump hard_reset_now - nop -@@ -494,31 +492,38 @@ - ;; thread_info as first parameter - move.d $r9, $r10 - moveq 5, $r11 ; SIGTRAP as second argument. -- jsr ugdb_trap_user -+ jsr ugdb_trap_user - nop - jump ret_from_intr ; Use the return routine for interrupts. - nop -- --gdb_handle_exception: -+ -+gdb_handle_exception: - subq 4, $sp - move.d $r0, [$sp] - #ifdef CONFIG_ETRAX_KGDB -- move $ccs, $r0 ; U-flag not affected by previous insns. -+ move $ccs, $r0 ; U-flag not affected by previous insns. - btstq 16, $r0 ; Test the U-flag. -- bmi _ugdb_handle_exception ; Go to user mode debugging. -- nop ; Empty delay-slot (cannot pop R0 here). -+ bmi _ugdb_handle_exception ; Go to user mode debugging. -+ nop ; Empty delay-slot (cannot pop R0 here). - ba kgdb_handle_exception ; Go to kernel debugging. - move.d [$sp+], $r0 ; Restore R0 in delay slot. - #endif -- -+ - _ugdb_handle_exception: - ba do_sigtrap ; SIGTRAP the offending process. - move.d [$sp+], $r0 ; Restore R0 in delay slot. - -+ .global kernel_execve -+kernel_execve: -+ move.d __NR_execve, $r9 -+ break 13 -+ ret -+ nop -+ - .data - - .section .rodata,"a" --sys_call_table: -+sys_call_table: - .long sys_restart_syscall ; 0 - old "setup()" system call, used - ; for restarting. - .long sys_exit -@@ -647,7 +652,7 @@ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_sigprocmask -- .long sys_ni_syscall /* old "create_module" */ -+ .long sys_ni_syscall /* old "create_module" */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130: old "get_kernel_syms" */ -@@ -789,7 +794,7 @@ - .long sys_clock_getres - .long sys_clock_nanosleep - .long sys_statfs64 -- .long sys_fstatfs64 -+ .long sys_fstatfs64 - .long sys_tgkill /* 270 */ - .long sys_utimes - .long sys_fadvise64_64 -@@ -805,7 +810,43 @@ - .long sys_mq_getsetattr - .long sys_ni_syscall /* reserved for kexec */ - .long sys_waitid -- -+ .long sys_ni_syscall /* 285 */ /* available */ -+ .long sys_add_key -+ .long sys_request_key -+ .long sys_keyctl -+ .long sys_ioprio_set -+ .long sys_ioprio_get /* 290 */ -+ .long sys_inotify_init -+ .long sys_inotify_add_watch -+ .long sys_inotify_rm_watch -+ .long sys_migrate_pages -+ .long sys_openat /* 295 */ -+ .long sys_mkdirat -+ .long sys_mknodat -+ .long sys_fchownat -+ .long sys_futimesat -+ .long sys_fstatat64 /* 300 */ -+ .long sys_unlinkat -+ .long sys_renameat -+ .long sys_linkat -+ .long sys_symlinkat -+ .long sys_readlinkat /* 305 */ -+ .long sys_fchmodat -+ .long sys_faccessat -+ .long sys_pselect6 -+ .long sys_ppoll -+ .long sys_unshare /* 310 */ -+ .long sys_set_robust_list -+ .long sys_set_robust_list -+ .long sys_get_robust_list -+ .long sys_splice -+ .long sys_sync_file_range -+ .long sys_tee /* 315 */ -+ .long sys_vmsplice -+ .long sys_move_pages -+ .long sys_getcpu -+ .long sys_epoll_pwait -+ - /* - * NOTE!! This doesn't have to be exact - we just have - * to make sure we have _enough_ of the "sys_ni_syscall" -@@ -816,4 +857,4 @@ - .rept NR_syscalls - (.-sys_call_table) / 4 - .long sys_ni_syscall - .endr -- -+ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/fasttimer.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/fasttimer.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/fasttimer.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/fasttimer.c 2007-01-09 10:29:19.000000000 +0100 -@@ -1,110 +1,10 @@ --/* $Id: fasttimer.c,v 1.11 2005/01/04 11:15:46 starvik Exp $ -+/* - * linux/arch/cris/kernel/fasttimer.c - * - * Fast timers for ETRAX FS - * This may be useful in other OS than Linux so use 2 space indentation... - * -- * $Log: fasttimer.c,v $ -- * Revision 1.11 2005/01/04 11:15:46 starvik -- * Don't share timer IRQ. -- * -- * Revision 1.10 2004/12/07 09:19:38 starvik -- * Corrected includes. -- * Use correct interrupt macros. -- * -- * Revision 1.9 2004/05/14 10:18:58 starvik -- * Export fast_timer_list -- * -- * Revision 1.8 2004/05/14 07:58:03 starvik -- * Merge of changes from 2.4 -- * -- * Revision 1.7 2003/07/10 12:06:14 starvik -- * Return IRQ_NONE if irq wasn't handled -- * -- * Revision 1.6 2003/07/04 08:27:49 starvik -- * Merge of Linux 2.5.74 -- * -- * Revision 1.5 2003/06/05 10:16:22 johana -- * New INTR_VECT macros. -- * -- * Revision 1.4 2003/06/03 08:49:45 johana -- * Fixed typo. -- * -- * Revision 1.3 2003/06/02 12:51:27 johana -- * Now compiles. -- * Commented some include files that probably can be removed. -- * -- * Revision 1.2 2003/06/02 12:09:41 johana -- * Ported to ETRAX FS using the trig interrupt instead of timer1. -- * -- * Revision 1.3 2002/12/12 08:26:32 starvik -- * Don't use C-comments inside CVS comments -- * -- * Revision 1.2 2002/12/11 15:42:02 starvik -- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/ -- * -- * Revision 1.1 2002/11/18 07:58:06 starvik -- * Fast timers (from Linux 2.4) -- * -- * Revision 1.5 2002/10/15 06:21:39 starvik -- * Added call to init_waitqueue_head -- * -- * Revision 1.4 2002/05/28 17:47:59 johana -- * Added del_fast_timer() -- * -- * Revision 1.3 2002/05/28 16:16:07 johana -- * Handle empty fast_timer_list -- * -- * Revision 1.2 2002/05/27 15:38:42 johana -- * Made it compile without warnings on Linux 2.4. -- * (includes, wait_queue, PROC_FS and snprintf) -- * -- * Revision 1.1 2002/05/27 15:32:25 johana -- * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree. -- * -- * Revision 1.8 2001/11/27 13:50:40 pkj -- * Disable interrupts while stopping the timer and while modifying the -- * list of active timers in timer1_handler() as it may be interrupted -- * by other interrupts (e.g., the serial interrupt) which may add fast -- * timers. -- * -- * Revision 1.7 2001/11/22 11:50:32 pkj -- * * Only store information about the last 16 timers. -- * * proc_fasttimer_read() now uses an allocated buffer, since it -- * requires more space than just a page even for only writing the -- * last 16 timers. The buffer is only allocated on request, so -- * unless /proc/fasttimer is read, it is never allocated. -- * * Renamed fast_timer_started to fast_timers_started to match -- * fast_timers_added and fast_timers_expired. -- * * Some clean-up. -- * -- * Revision 1.6 2000/12/13 14:02:08 johana -- * Removed volatile for fast_timer_list -- * -- * Revision 1.5 2000/12/13 13:55:35 johana -- * Added DEBUG_LOG, added som cli() and cleanup -- * -- * Revision 1.4 2000/12/05 13:48:50 johana -- * Added range check when writing proc file, modified timer int handling -- * -- * Revision 1.3 2000/11/23 10:10:20 johana -- * More debug/logging possibilities. -- * Moved GET_JIFFIES_USEC() to timex.h and time.c -- * -- * Revision 1.2 2000/11/01 13:41:04 johana -- * Clean up and bugfixes. -- * Created new do_gettimeofday_fast() that gets a timeval struct -- * with time based on jiffies and *R_TIMER0_DATA, uses a table -- * for fast conversion of timer value to microseconds. -- * (Much faster the standard do_gettimeofday() and we don't really -- * wan't to use the true time - we wan't the "uptime" so timers don't screw up -- * when we change the time. -- * TODO: Add efficient support for continuous timers as well. -- * -- * Revision 1.1 2000/10/26 15:49:16 johana -- * Added fasttimer, highresolution timers. -- * -- * Copyright (C) 2000,2001 2002, 2003 Axis Communications AB, Lund, Sweden -+ * Copyright (C) 2000-2006 Axis Communications AB, Lund, Sweden - */ - - #include -@@ -128,13 +28,13 @@ - #include - #include - --/* -- * timer0 is running at 100MHz and generating jiffies timer ticks -+/* -+ * timer0 is running at 100MHz and generating jiffies timer ticks - * at 100 or 1000 HZ. - * fasttimer gives an API that gives timers that expire "between" the jiffies - * giving microsecond resolution (10 ns). - * fasttimer uses reg_timer_rw_trig register to get interrupt when -- * r_time reaches a certain value. -+ * r_time reaches a certain value. - */ - - -@@ -151,19 +51,19 @@ - #define SANITYCHECK(x) - #endif - --#define D1(x) --#define D2(x) --#define DP(x) -+#define D1(x) -+#define D2(x) -+#define DP(x) - - #define __INLINE__ inline - --static int fast_timer_running = 0; --static int fast_timers_added = 0; --static int fast_timers_started = 0; --static int fast_timers_expired = 0; --static int fast_timers_deleted = 0; --static int fast_timer_is_init = 0; --static int fast_timer_ints = 0; -+static unsigned int fast_timer_running = 0; -+static unsigned int fast_timers_added = 0; -+static unsigned int fast_timers_started = 0; -+static unsigned int fast_timers_expired = 0; -+static unsigned int fast_timers_deleted = 0; -+static unsigned int fast_timer_is_init = 0; -+static unsigned int fast_timer_ints = 0; - - struct fast_timer *fast_timer_list = NULL; - -@@ -171,8 +71,8 @@ - #define DEBUG_LOG_MAX 128 - static const char * debug_log_string[DEBUG_LOG_MAX]; - static unsigned long debug_log_value[DEBUG_LOG_MAX]; --static int debug_log_cnt = 0; --static int debug_log_cnt_wrapped = 0; -+static unsigned int debug_log_cnt = 0; -+static unsigned int debug_log_cnt_wrapped = 0; - - #define DEBUG_LOG(string, value) \ - { \ -@@ -202,48 +102,33 @@ - int timer_div_settings[NUM_TIMER_STATS]; - int timer_delay_settings[NUM_TIMER_STATS]; - -+struct work_struct fast_work; - - static void --timer_trig_handler(void); -+timer_trig_handler(void* dummy); - - - - /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */ --void __INLINE__ do_gettimeofday_fast(struct timeval *tv) -+void __INLINE__ do_gettimeofday_fast(struct fasttime_t *tv) - { -- unsigned long sec = jiffies; -- unsigned long usec = GET_JIFFIES_USEC(); -- -- usec += (sec % HZ) * (1000000 / HZ); -- sec = sec / HZ; -- -- if (usec > 1000000) -- { -- usec -= 1000000; -- sec++; -- } -- tv->tv_sec = sec; -- tv->tv_usec = usec; -+ tv->tv_jiff = jiffies; -+ tv->tv_usec = GET_JIFFIES_USEC(); - } - --int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1) -+int __INLINE__ timeval_cmp(struct fasttime_t *t0, struct fasttime_t *t1) - { -- if (t0->tv_sec < t1->tv_sec) -- { -+ /* Compare jiffies. Takes care of wrapping */ -+ if (time_before(t0->tv_jiff, t1->tv_jiff)) - return -1; -- } -- else if (t0->tv_sec > t1->tv_sec) -- { -+ else if (time_after(t0->tv_jiff, t1->tv_jiff)) - return 1; -- } -+ -+ /* Compare us */ - if (t0->tv_usec < t1->tv_usec) -- { - return -1; -- } - else if (t0->tv_usec > t1->tv_usec) -- { - return 1; -- } - return 0; - } - -@@ -254,20 +139,23 @@ - reg_timer_rw_intr_mask intr_mask; - reg_timer_rw_trig trig; - reg_timer_rw_trig_cfg trig_cfg = { 0 }; -- reg_timer_r_time r_time; -- -- r_time = REG_RD(timer, regi_timer, r_time); -+ reg_timer_r_time r_time0; -+ reg_timer_r_time r_time1; -+ unsigned char trig_wrap; -+ unsigned char time_wrap; - -+ r_time0 = REG_RD(timer, regi_timer, r_time); -+ - D1(printk("start_timer_trig : %d us freq: %i div: %i\n", - delay_us, freq_index, div)); - /* Clear trig irq */ - intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); - intr_mask.trig = 0; - REG_WR(timer, regi_timer, rw_intr_mask, intr_mask); -- -- /* Set timer values */ -+ -+ /* Set timer values and check if trigger wraps. */ - /* r_time is 100MHz (10 ns resolution) */ -- trig = r_time + delay_us*(1000/10); -+ trig_wrap = (trig = r_time0 + delay_us*(1000/10)) < r_time0; - - timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = trig; - timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us; -@@ -275,15 +163,17 @@ - /* Ack interrupt */ - ack_intr.trig = 1; - REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); -- -+ - /* Start timer */ - REG_WR(timer, regi_timer, rw_trig, trig); - trig_cfg.tmr = regk_timer_time; - REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); - - /* Check if we have already passed the trig time */ -- r_time = REG_RD(timer, regi_timer, r_time); -- if (r_time < trig) { -+ r_time1 = REG_RD(timer, regi_timer, r_time); -+ time_wrap = r_time1 < r_time0; -+ -+ if ((trig_wrap && !time_wrap) || (r_time1 < trig)) { - /* No, Enable trig irq */ - intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); - intr_mask.trig = 1; -@@ -291,16 +181,17 @@ - fast_timers_started++; - fast_timer_running = 1; - } -- else -+ else - { - /* We have passed the time, disable trig point, ack intr */ - trig_cfg.tmr = regk_timer_off; - REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); - REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); -- /* call the int routine directly */ -- timer_trig_handler(); -+ /* call the int routine */ -+ INIT_WORK(&fast_work, timer_trig_handler, (void*)NULL); -+ schedule_work(&fast_work); - } -- -+ - } - - /* In version 1.4 this function takes 27 - 50 us */ -@@ -327,7 +218,7 @@ - { - printk("timer name: %s data: 0x%08lX already in list!\n", name, data); - sanity_failed++; -- return; -+ goto done; - } - else - { -@@ -343,11 +234,11 @@ - t->name = name; - - t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000; -- t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000; -+ t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ; - if (t->tv_expires.tv_usec > 1000000) - { - t->tv_expires.tv_usec -= 1000000; -- t->tv_expires.tv_sec++; -+ t->tv_expires.tv_jiff += HZ; - } - #ifdef FAST_TIMER_LOG - timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t; -@@ -388,6 +279,7 @@ - - D2(printk("start_one_shot_timer: %d us done\n", delay_us)); - -+done: - local_irq_restore(flags); - } /* start_one_shot_timer */ - -@@ -431,26 +323,32 @@ - /* Timer interrupt handler for trig interrupts */ - - static irqreturn_t --timer_trig_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+timer_trig_interrupt(int irq, void *dev_id) - { - reg_timer_r_masked_intr masked_intr; -- - /* Check if the timer interrupt is for us (a trig int) */ - masked_intr = REG_RD(timer, regi_timer, r_masked_intr); - if (!masked_intr.trig) - return IRQ_NONE; -- timer_trig_handler(); -+ timer_trig_handler(NULL); - return IRQ_HANDLED; - } - --static void timer_trig_handler(void) -+static void timer_trig_handler(void* dummy) - { - reg_timer_rw_ack_intr ack_intr = { 0 }; - reg_timer_rw_intr_mask intr_mask; - reg_timer_rw_trig_cfg trig_cfg = { 0 }; - struct fast_timer *t; -- unsigned long flags; -+ unsigned long flags; - -+ /* We keep interrupts disabled not only when we modify the -+ * fast timer list, but any time we hold a reference to a -+ * timer in the list, since del_fast_timer may be called -+ * from (another) interrupt context. Thus, the only time -+ * when interrupts are enabled is when calling the timer -+ * callback function. -+ */ - local_irq_save(flags); - - /* Clear timer trig interrupt */ -@@ -470,16 +368,17 @@ - fast_timer_running = 0; - fast_timer_ints++; - -- local_irq_restore(flags); -+ fast_timer_function_type *f; -+ unsigned long d; - - t = fast_timer_list; - while (t) - { -- struct timeval tv; -+ struct fasttime_t tv; - - /* Has it really expired? */ - do_gettimeofday_fast(&tv); -- D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec)); -+ D1(printk("t: %is %06ius\n", tv.tv_jiff, tv.tv_usec)); - - if (timeval_cmp(&t->tv_expires, &tv) <= 0) - { -@@ -490,7 +389,6 @@ - fast_timers_expired++; - - /* Remove this timer before call, since it may reuse the timer */ -- local_irq_save(flags); - if (t->prev) - { - t->prev->next = t->next; -@@ -505,11 +403,21 @@ - } - t->prev = NULL; - t->next = NULL; -- local_irq_restore(flags); - -- if (t->function != NULL) -+ /* Save function callback data before enabling interrupts, -+ * since the timer may be removed and we don't know how it -+ * was allocated (e.g. ->function and ->data may become -+ * overwritten after deletion if the timer was stack-allocated). -+ */ -+ f = t->function; -+ d = t->data; -+ -+ if (f != NULL) - { -- t->function(t->data); -+ /* Run the callback function with interrupts enabled. */ -+ local_irq_restore(flags); -+ f(d); -+ local_irq_save(flags); - } - else - { -@@ -522,16 +430,19 @@ - D1(printk(".\n")); - } - -- local_irq_save(flags); - if ((t = fast_timer_list) != NULL) - { - /* Start next timer.. */ -- long us; -- struct timeval tv; -+ long us = 0; -+ struct fasttime_t tv; - - do_gettimeofday_fast(&tv); -- us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 + -- t->tv_expires.tv_usec - tv.tv_usec); -+ -+ /* time_after_eq takes care of wrapping */ -+ if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff)) -+ us = ((t->tv_expires.tv_jiff - tv.tv_jiff) * 1000000 / HZ + -+ t->tv_expires.tv_usec - tv.tv_usec); -+ - if (us > 0) - { - if (!fast_timer_running) -@@ -541,7 +452,6 @@ - #endif - start_timer_trig(us); - } -- local_irq_restore(flags); - break; - } - else -@@ -552,9 +462,10 @@ - D1(printk("e! %d\n", us)); - } - } -- local_irq_restore(flags); - } - -+ local_irq_restore(flags); -+ - if (!t) - { - D1(printk("ttrig stop!\n")); -@@ -577,28 +488,17 @@ - void schedule_usleep(unsigned long us) - { - struct fast_timer t; --#ifdef DECLARE_WAITQUEUE - wait_queue_head_t sleep_wait; - init_waitqueue_head(&sleep_wait); -- { -- DECLARE_WAITQUEUE(wait, current); --#else -- struct wait_queue *sleep_wait = NULL; -- struct wait_queue wait = { current, NULL }; --#endif - - D1(printk("schedule_usleep(%d)\n", us)); -- add_wait_queue(&sleep_wait, &wait); -- set_current_state(TASK_INTERRUPTIBLE); - start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us, - "usleep"); -- schedule(); -- set_current_state(TASK_RUNNING); -- remove_wait_queue(&sleep_wait, &wait); -+ /* Uninterruptible sleep on the fast timer. (The condition is somewhat -+ redundant since the timer is what wakes us up.) */ -+ wait_event(sleep_wait, !fast_timer_pending(&t)); -+ - D1(printk("done schedule_usleep(%d)\n", us)); --#ifdef DECLARE_WAITQUEUE -- } --#endif - } - - #ifdef CONFIG_PROC_FS -@@ -638,7 +538,7 @@ - unsigned long flags; - int i = 0; - int num_to_show; -- struct timeval tv; -+ struct fasttime_t tv; - struct fast_timer *t, *nextt; - static char *bigbuf = NULL; - static unsigned long used; -@@ -646,7 +546,8 @@ - if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE))) - { - used = 0; -- bigbuf[0] = '\0'; -+ if (buf) -+ buf[0] = '\0'; - return 0; - } - -@@ -668,7 +569,7 @@ - used += sprintf(bigbuf + used, "Fast timer running: %s\n", - fast_timer_running ? "yes" : "no"); - used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n", -- (unsigned long)tv.tv_sec, -+ (unsigned long)tv.tv_jiff, - (unsigned long)tv.tv_usec); - #ifdef FAST_TIMER_SANITY_CHECKS - used += sprintf(bigbuf + used, "Sanity failed: %i\n", -@@ -717,9 +618,9 @@ - "d: %6li us data: 0x%08lX" - "\n", - t->name, -- (unsigned long)t->tv_set.tv_sec, -+ (unsigned long)t->tv_set.tv_jiff, - (unsigned long)t->tv_set.tv_usec, -- (unsigned long)t->tv_expires.tv_sec, -+ (unsigned long)t->tv_expires.tv_jiff, - (unsigned long)t->tv_expires.tv_usec, - t->delay_us, - t->data -@@ -739,9 +640,9 @@ - "d: %6li us data: 0x%08lX" - "\n", - t->name, -- (unsigned long)t->tv_set.tv_sec, -+ (unsigned long)t->tv_set.tv_jiff, - (unsigned long)t->tv_set.tv_usec, -- (unsigned long)t->tv_expires.tv_sec, -+ (unsigned long)t->tv_expires.tv_jiff, - (unsigned long)t->tv_expires.tv_usec, - t->delay_us, - t->data -@@ -759,9 +660,9 @@ - "d: %6li us data: 0x%08lX" - "\n", - t->name, -- (unsigned long)t->tv_set.tv_sec, -+ (unsigned long)t->tv_set.tv_jiff, - (unsigned long)t->tv_set.tv_usec, -- (unsigned long)t->tv_expires.tv_sec, -+ (unsigned long)t->tv_expires.tv_jiff, - (unsigned long)t->tv_expires.tv_usec, - t->delay_us, - t->data -@@ -772,7 +673,6 @@ - - used += sprintf(bigbuf + used, "Active timers:\n"); - local_irq_save(flags); -- local_irq_save(flags); - t = fast_timer_list; - while (t != NULL && (used+100 < BIG_BUF_SIZE)) - { -@@ -783,15 +683,15 @@ - /* " func: 0x%08lX" */ - "\n", - t->name, -- (unsigned long)t->tv_set.tv_sec, -+ (unsigned long)t->tv_set.tv_jiff, - (unsigned long)t->tv_set.tv_usec, -- (unsigned long)t->tv_expires.tv_sec, -+ (unsigned long)t->tv_expires.tv_jiff, - (unsigned long)t->tv_expires.tv_usec, - t->delay_us, - t->data - /* , t->function */ - ); -- local_irq_disable(); -+ local_irq_save(flags); - if (t->next != nextt) - { - printk("timer removed!\n"); -@@ -822,7 +722,7 @@ - static struct fast_timer tr[10]; - static int exp_num[10]; - --static struct timeval tv_exp[100]; -+static struct fasttime_t tv_exp[100]; - - static void test_timeout(unsigned long data) - { -@@ -860,7 +760,7 @@ - int prev_num; - int j; - -- struct timeval tv, tv0, tv1, tv2; -+ struct fasttime_t tv, tv0, tv1, tv2; - - printk("fast_timer_test() start\n"); - do_gettimeofday_fast(&tv); -@@ -873,7 +773,7 @@ - { - do_gettimeofday_fast(&tv_exp[j]); - } -- printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec); -+ printk("fast_timer_test() %is %06i\n", tv.tv_jiff, tv.tv_usec); - - for (j = 0; j < 1000; j++) - { -@@ -883,11 +783,11 @@ - for (j = 0; j < 100; j++) - { - printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n", -- tv_exp[j].tv_sec,tv_exp[j].tv_usec, -- tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec, -- tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec, -- tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec, -- tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec); -+ tv_exp[j].tv_jiff,tv_exp[j].tv_usec, -+ tv_exp[j+1].tv_jiff,tv_exp[j+1].tv_usec, -+ tv_exp[j+2].tv_jiff,tv_exp[j+2].tv_usec, -+ tv_exp[j+3].tv_jiff,tv_exp[j+3].tv_usec, -+ tv_exp[j+4].tv_jiff,tv_exp[j+4].tv_usec); - j += 4; - } - do_gettimeofday_fast(&tv0); -@@ -919,9 +819,9 @@ - } - } - do_gettimeofday_fast(&tv2); -- printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec); -- printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec); -- printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec); -+ printk("Timers started %is %06i\n", tv0.tv_jiff, tv0.tv_usec); -+ printk("Timers started at %is %06i\n", tv1.tv_jiff, tv1.tv_usec); -+ printk("Timers done %is %06i\n", tv2.tv_jiff, tv2.tv_usec); - DP(printk("buf0:\n"); - printk(buf0); - printk("buf1:\n"); -@@ -943,9 +843,9 @@ - printk("%-10s set: %6is %06ius exp: %6is %06ius " - "data: 0x%08X func: 0x%08X\n", - t->name, -- t->tv_set.tv_sec, -+ t->tv_set.tv_jiff, - t->tv_set.tv_usec, -- t->tv_expires.tv_sec, -+ t->tv_expires.tv_jiff, - t->tv_expires.tv_usec, - t->data, - t->function -@@ -953,10 +853,10 @@ - - printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n", - t->delay_us, -- tv_exp[j].tv_sec, -+ tv_exp[j].tv_jiff, - tv_exp[j].tv_usec, - exp_num[j], -- (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); -+ (tv_exp[j].tv_jiff - t->tv_expires.tv_jiff)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); - } - proc_fasttimer_read(buf5, NULL, 0, 0, 0); - printk("buf5 after all done:\n"); -@@ -966,7 +866,7 @@ - #endif - - --void fast_timer_init(void) -+int fast_timer_init(void) - { - /* For some reason, request_irq() hangs when called froom time_init() */ - if (!fast_timer_is_init) -@@ -981,10 +881,10 @@ - proc_register_dynamic(&proc_root, &fasttimer_proc_entry); - #endif - #endif /* PROC_FS */ -- if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, IRQF_DISABLED, -- "fast timer int", NULL)) -+ if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, SA_SHIRQ | SA_INTERRUPT, -+ "fast timer int", &fast_timer_list)) - { -- printk("err: timer1 irq\n"); -+ printk("err: fasttimer irq\n"); - } - fast_timer_is_init = 1; - #ifdef FAST_TIMER_TEST -@@ -992,4 +892,6 @@ - fast_timer_test(); - #endif - } -+ return 0; - } -+__initcall(fast_timer_init); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/head.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/head.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/head.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/head.S 2007-01-09 10:29:19.000000000 +0100 -@@ -4,7 +4,6 @@ - * Copyright (C) 2003, Axis Communications AB - */ - -- - #define ASSEMBLER_MACROS_ONLY - - /* -@@ -12,14 +11,21 @@ - * -traditional must not be used when assembling this file. - */ - #include -+#include -+#include - #include - #include - #include - #include -- -+#include -+#include -+ - #define CRAMFS_MAGIC 0x28cd3d45 -+#define JHEAD_MAGIC 0x1FF528A6 -+#define JHEAD_SIZE 8 - #define RAM_INIT_MAGIC 0x56902387 --#define COMMAND_LINE_MAGIC 0x87109563 -+#define COMMAND_LINE_MAGIC 0x87109563 -+#define NAND_BOOT_MAGIC 0x9a9db001 - - ;; NOTE: R8 and R9 carry information from the decompressor (if the - ;; kernel was compressed). They must not be used in the code below -@@ -30,11 +36,10 @@ - .global romfs_start - .global romfs_length - .global romfs_in_flash -+ .global nand_boot - .global swapper_pg_dir -- .global crisv32_nand_boot -- .global crisv32_nand_cramfs_offset - -- ;; Dummy section to make it bootable with current VCS simulator -+ ;; Dummy section to make it bootable with current VCS simulator - #ifdef CONFIG_ETRAXFS_SIM - .section ".boot", "ax" - ba tstart -@@ -42,13 +47,13 @@ - #endif - - .text --tstart: -+tstart: - ;; This is the entry point of the kernel. The CPU is currently in - ;; supervisor mode. -- ;; -+ ;; - ;; 0x00000000 if flash. - ;; 0x40004000 if DRAM. -- ;; -+ ;; - di - - ;; Start clocks for used blocks. -@@ -72,20 +77,25 @@ - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0 - move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1 - move.d $r1, [$r0] -- --#ifdef CONFIG_ETRAXFS_SIM -+ -+#ifdef CONFIG_ETRAXFS_SIM - ;; Set up minimal flash waitstates - move.d 0, $r10 - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11 - move.d $r10, [$r11] --#endif -+#endif - -+#ifdef CONFIG_SMP -+secondary_cpu_entry: /* Entry point for secondary CPUs */ -+ di -+#endif -+ - ;; Setup and enable the MMU. Use same configuration for both the data - ;; and the instruction MMU. - ;; - ;; Note; 3 cycles is needed for a bank-select to take effect. Further; - ;; bank 1 is the instruction MMU, bank 2 is the data MMU. --#ifndef CONFIG_ETRAXFS_SIM -+#ifndef CONFIG_ETRAXFS_SIM - move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \ - | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \ - | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0 -@@ -96,7 +106,7 @@ - | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0) \ - | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) \ - | REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0 --#endif -+#endif - - ;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00. - move.d REG_FIELD(mmu, rw_mm_kbase_lo, base_4, 4) \ -@@ -146,8 +156,8 @@ - | REG_STATE(mmu, rw_mm_cfg, seg_2, page) \ - | REG_STATE(mmu, rw_mm_cfg, seg_1, page) \ - | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2 --#endif -- -+#endif -+ - ;; Update instruction MMU. - move 1, $srs - nop -@@ -165,7 +175,7 @@ - move $r0, $s2 ; kbase_hi. - move $r1, $s1 ; kbase_lo - move $r2, $s0 ; mm_cfg, virtual memory configuration. -- -+ - ;; Enable data and instruction MMU. - move 0, $srs - moveq 0xf, $r0 ; IMMU, DMMU, DCache, Icache on -@@ -183,17 +193,11 @@ - nop - nop - nop -- move $s10, $r0 -+ move $s12, $r0 - cmpq 0, $r0 - beq master_cpu - nop - slave_cpu: -- ; A slave waits for cpu_now_booting to be equal to CPU ID. -- move.d cpu_now_booting, $r1 --slave_wait: -- cmp.d [$r1], $r0 -- bne slave_wait -- nop - ; Time to boot-up. Get stack location provided by master CPU. - move.d smp_init_current_idle_thread, $r1 - move.d [$r1], $sp -@@ -203,9 +207,16 @@ - jsr smp_callin - nop - master_cpu: --#endif -+ /* Set up entry point for secondary CPUs. The boot ROM has set up -+ * EBP at start of internal memory. The CPU will get there -+ * later when we issue an IPI to them... */ -+ move.d MEM_INTMEM_START + IPI_INTR_VECT * 4, $r0 -+ move.d secondary_cpu_entry, $r1 -+ move.d $r1, [$r0] -+#endif - #ifndef CONFIG_ETRAXFS_SIM -- ;; Check if starting from DRAM or flash. -+ ; Check if starting from DRAM (network->RAM boot or unpacked -+ ; compressed kernel), or directly from flash. - lapcq ., $r0 - and.d 0x7fffffff, $r0 ; Mask off the non-cache bit. - cmp.d 0x10000, $r0 ; Arbitrary, something above this code. -@@ -238,6 +249,7 @@ - ;; Copy the text and data section to DRAM. This depends on that the - ;; variables used below are correctly set up by the linker script. - ;; The calculated value stored in R4 is used below. -+ ;; Leave the cramfs file system (piggybacked after the kernel) in flash. - moveq 0, $r0 ; Source. - move.d text_start, $r1 ; Destination. - move.d __vmlinux_end, $r2 -@@ -249,7 +261,7 @@ - blo 1b - nop - -- ;; Keep CRAMFS in flash. -+ ;; Check for cramfs. - moveq 0, $r0 - move.d romfs_length, $r1 - move.d $r0, [$r1] -@@ -257,7 +269,8 @@ - cmp.d CRAMFS_MAGIC, $r0 - bne 1f - nop -- -+ -+ ;; Set length and start of cramfs, set romfs_in_flash flag - addoq +4, $r4, $acr - move.d [$acr], $r0 - move.d romfs_length, $r1 -@@ -273,35 +286,32 @@ - nop - - _inram: -- ;; Check if booting from NAND flash (in that case we just remember the offset -- ;; into the flash where cramfs should be). -- move.d REG_ADDR(config, regi_config, r_bootsel), $r0 -- move.d [$r0], $r0 -- and.d REG_MASK(config, r_bootsel, boot_mode), $r0 -- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 -- bne move_cramfs -- moveq 1,$r0 -- move.d crisv32_nand_boot, $r1 -- move.d $r0, [$r1] -- move.d crisv32_nand_cramfs_offset, $r1 -- move.d $r9, [$r1] -+ ;; Check if booting from NAND flash; if so, set appropriate flags -+ ;; and move on. -+ cmp.d NAND_BOOT_MAGIC, $r12 -+ bne move_cramfs ; not nand, jump - moveq 1, $r0 -- move.d romfs_in_flash, $r1 -+ move.d nand_boot, $r1 ; tell axisflashmap we're booting from NAND -+ move.d $r0, [$r1] -+ moveq 0, $r0 ; tell axisflashmap romfs is not in -+ move.d romfs_in_flash, $r1 ; (directly accessed) flash - move.d $r0, [$r1] -- jump _start_it -+ jump _start_it ; continue with boot - nop - --move_cramfs: -- ;; Move the cramfs after BSS. -+move_cramfs: -+ ;; kernel is in DRAM. -+ ;; Must figure out if there is a piggybacked rootfs image or not. -+ ;; Set romfs_length to 0 => no rootfs image available by default. - moveq 0, $r0 - move.d romfs_length, $r1 - move.d $r0, [$r1] - --#ifndef CONFIG_ETRAXFS_SIM -+#ifndef CONFIG_ETRAXFS_SIM - ;; The kernel could have been unpacked to DRAM by the loader, but -- ;; the cramfs image could still be inte the flash immediately -- ;; following the compressed kernel image. The loaded passes the address -- ;; of the bute succeeding the last compressed byte in the flash in -+ ;; the cramfs image could still be in the flash immediately -+ ;; following the compressed kernel image. The loader passes the address -+ ;; of the byte succeeding the last compressed byte in the flash in - ;; register R9 when starting the kernel. - cmp.d 0x0ffffff8, $r9 - bhs _no_romfs_in_flash ; R9 points outside the flash area. -@@ -309,12 +319,14 @@ - #else - ba _no_romfs_in_flash - nop --#endif -+#endif -+ ;; cramfs rootfs might to be in flash. Check for it. - move.d [$r9], $r0 ; cramfs_super.magic - cmp.d CRAMFS_MAGIC, $r0 - bne _no_romfs_in_flash - nop - -+ ;; found cramfs in flash. set address and size, and romfs_in_flash flag. - addoq +4, $r9, $acr - move.d [$acr], $r0 - move.d romfs_length, $r1 -@@ -330,29 +342,45 @@ - nop - - _no_romfs_in_flash: -- ;; Look for cramfs. --#ifndef CONFIG_ETRAXFS_SIM -+ ;; No romfs in flash, so look for cramfs, or jffs2 with jhead, -+ ;; after kernel in RAM, as is the case with network->RAM boot. -+ ;; For cramfs, partition starts with magic and length. -+ ;; For jffs2, a jhead is prepended which contains with magic and length. -+ ;; The jhead is not part of the jffs2 partition however. -+#ifndef CONFIG_ETRAXFS_SIM - move.d __vmlinux_end, $r0 - #else -- move.d __end, $r0 --#endif -+ move.d __end, $r0 -+#endif - move.d [$r0], $r1 -- cmp.d CRAMFS_MAGIC, $r1 -- bne 2f -+ cmp.d CRAMFS_MAGIC, $r1 ; cramfs magic? -+ beq 2f ; yes, jump -+ nop -+ cmp.d JHEAD_MAGIC, $r1 ; jffs2 (jhead) magic? -+ bne 4f ; no, skip copy -+ nop -+ addq 4, $r0 ; location of jffs2 size -+ move.d [$r0+], $r2 ; fetch jffs2 size -> r2 -+ ; r0 now points to start of jffs2 -+ ba 3f - nop -+2: -+ addoq +4, $r0, $acr ; location of cramfs size -+ move.d [$acr], $r2 ; fetch cramfs size -> r2 -+ ; r0 still points to start of cramfs -+3: -+ ;; Now, move the root fs to after kernel's BSS - -- addoq +4, $r0, $acr -- move.d [$acr], $r2 -- move.d _end, $r1 -+ move.d _end, $r1 ; start of cramfs -> r1 - move.d romfs_start, $r3 -- move.d $r1, [$r3] -+ move.d $r1, [$r3] ; store at romfs_start (for axisflashmap) - move.d romfs_length, $r3 -- move.d $r2, [$r3] -+ move.d $r2, [$r3] ; store size at romfs_length - --#ifndef CONFIG_ETRAXFS_SIM -- add.d $r2, $r0 -+#ifndef CONFIG_ETRAXFS_SIM -+ add.d $r2, $r0 ; copy from end and downwards - add.d $r2, $r1 -- -+ - lsrq 1, $r2 ; Size is in bytes, we copy words. - addq 1, $r2 - 1: -@@ -364,17 +392,24 @@ - bne 1b - nop - #endif -- --2: -+ -+4: -+ ;; BSS move done. -+ ;; Clear romfs_in_flash flag, as we now know romfs is in DRAM -+ ;; Also clear nand_boot flag; if we got here, we know we've not -+ ;; booted from NAND flash. - moveq 0, $r0 - move.d romfs_in_flash, $r1 - move.d $r0, [$r1] -+ moveq 0, $r0 -+ move.d nand_boot, $r1 -+ move.d $r0, [$r1] - - jump _start_it ; Jump to cached code. - nop -- -+ - _start_it: -- -+ - ;; Check if kernel command line is supplied - cmp.d COMMAND_LINE_MAGIC, $r10 - bne no_command_line -@@ -383,9 +418,9 @@ - move.d 256, $r13 - move.d cris_command_line, $r10 - or.d 0x80000000, $r11 ; Make it virtual --1: -- move.b [$r11+], $r12 -- move.b $r12, [$r10+] -+1: -+ move.b [$r11+], $r1 -+ move.b $r1, [$r10+] - subq 1, $r13 - bne 1b - nop -@@ -401,7 +436,7 @@ - move.d etrax_irv, $r1 ; Set the exception base register and pointer. - move.d $r0, [$r1] - --#ifndef CONFIG_ETRAXFS_SIM -+#ifndef CONFIG_ETRAXFS_SIM - ;; Clear the BSS region from _bss_start to _end. - move.d __bss_start, $r0 - move.d _end, $r1 -@@ -429,17 +464,31 @@ - .data - etrax_irv: - .dword 0 -+ -+; Variables for communication with the Axis flash map driver (axisflashmap), -+; and for setting up memory in arch/cris/kernel/setup.c . -+ -+; romfs_start is set to the start of the root file system, if it exists -+; in directly accessible memory (i.e. NOR Flash when booting from Flash, -+; or RAM when booting directly from a network-downloaded RAM image) - romfs_start: - .dword 0 -+ -+; romfs_length is set to the size of the root file system image, if it exists -+; in directly accessible memory (see romfs_start). Otherwise it is set to 0. - romfs_length: - .dword 0 -+ -+; romfs_in_flash is set to 1 if the root file system resides in directly -+; accessible flash memory (i.e. NOR flash). It is set to 0 for RAM boot -+; or NAND flash boot. - romfs_in_flash: - .dword 0 --crisv32_nand_boot: -- .dword 0 --crisv32_nand_cramfs_offset: -- .dword 0 - -+; nand_boot is set to 1 when the kernel has been booted from NAND flash -+nand_boot: -+ .dword 0 -+ - swapper_pg_dir = 0xc0002000 - - .section ".init.data", "aw" -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/io.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/io.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/io.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/io.c 2006-11-21 00:04:55.000000000 +0100 -@@ -1,7 +1,7 @@ --/* -+/* - * Helper functions for I/O pins. - * -- * Copyright (c) 2004 Axis Communications AB. -+ * Copyright (c) 2004, 2006 Axis Communications AB. - */ - - #include -@@ -15,6 +15,10 @@ - #include - #include - -+#ifndef DEBUG -+#define DEBUG(x) -+#endif -+ - struct crisv32_ioport crisv32_ioports[] = - { - { -@@ -46,13 +50,15 @@ - (unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_dout), - (unsigned long*)REG_ADDR(gio, regi_gio, r_pe_din), - 18 -- } -+ } - }; - - #define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport) - --struct crisv32_iopin crisv32_led1_green; --struct crisv32_iopin crisv32_led1_red; -+struct crisv32_iopin crisv32_led_net0_green; -+struct crisv32_iopin crisv32_led_net0_red; -+struct crisv32_iopin crisv32_led_net1_green; -+struct crisv32_iopin crisv32_led_net1_red; - struct crisv32_iopin crisv32_led2_green; - struct crisv32_iopin crisv32_led2_red; - struct crisv32_iopin crisv32_led3_green; -@@ -76,34 +82,54 @@ - static int __init crisv32_io_init(void) - { - int ret = 0; -+ -+ u32 i; -+ -+ /* Locks *should* be dynamically initialized. */ -+ for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) -+ spin_lock_init (&crisv32_ioports[i].lock); -+ spin_lock_init (&dummy_port.lock); -+ - /* Initialize LEDs */ -- ret += crisv32_io_get_name(&crisv32_led1_green, CONFIG_ETRAX_LED1G); -- ret += crisv32_io_get_name(&crisv32_led1_red, CONFIG_ETRAX_LED1R); -+#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) -+ ret += crisv32_io_get_name(&crisv32_led_net0_green, CONFIG_ETRAX_LED_G_NET0); -+ crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); -+ if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { -+ ret += crisv32_io_get_name(&crisv32_led_net0_red, CONFIG_ETRAX_LED_R_NET0); -+ crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); -+ } else -+ crisv32_led_net0_red = dummy_led; -+#endif -+ -+#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO -+ ret += crisv32_io_get_name(&crisv32_led_net1_green, CONFIG_ETRAX_LED_G_NET1); -+ crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out); -+ if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) { -+ crisv32_io_get_name(&crisv32_led_net1_red, CONFIG_ETRAX_LED_R_NET1); -+ crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out); -+ } else -+ crisv32_led_net1_red = dummy_led; -+#endif -+ - ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_LED2G); - ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_LED2R); - ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_LED3G); - ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_LED3R); -- crisv32_io_set_dir(&crisv32_led1_green, crisv32_io_dir_out); -- crisv32_io_set_dir(&crisv32_led1_red, crisv32_io_dir_out); -+ - crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); - -- if (!strcmp(CONFIG_ETRAX_LED1G, CONFIG_ETRAX_LED1R)) -- crisv32_led1_red = dummy_led; -- if (!strcmp(CONFIG_ETRAX_LED2G, CONFIG_ETRAX_LED2R)) -- crisv32_led2_red = dummy_led; -- - return ret; - } - - __initcall(crisv32_io_init); - --int crisv32_io_get(struct crisv32_iopin* iopin, -+int crisv32_io_get(struct crisv32_iopin* iopin, - unsigned int port, unsigned int pin) - { -- if (port > NBR_OF_PORTS) -+ if (port > NBR_OF_PORTS) - return -EINVAL; - if (port > crisv32_ioports[port].pin_count) - return -EINVAL; -@@ -111,14 +137,17 @@ - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - -- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) -+ /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ -+ /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ -+ if (port != 0 && crisv32_pinmux_alloc(port-1, pin, pin, pinmux_gpio)) - return -EIO; -- -+ DEBUG(printk("crisv32_io_get: Allocated pin %d on port %d\n", pin, port )); -+ - return 0; - } - - int crisv32_io_get_name(struct crisv32_iopin* iopin, -- char* name) -+ const char* name) - { - int port; - int pin; -@@ -128,7 +157,7 @@ - - if (toupper(*name) < 'A' || toupper(*name) > 'E') - return -EINVAL; -- -+ - port = toupper(*name) - 'A'; - name++; - pin = simple_strtoul(name, NULL, 10); -@@ -139,9 +168,12 @@ - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - -- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) -+ /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ -+ /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ -+ if (port != 0 && crisv32_pinmux_alloc(port-1, pin, pin, pinmux_gpio)) - return -EIO; - -+ DEBUG(printk("crisv32_io_get_name: Allocated pin %d on port %d\n", pin, port)); - return 0; - } - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/irq.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/irq.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/irq.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/irq.c 2006-10-13 14:43:13.000000000 +0200 -@@ -44,10 +44,10 @@ - cpumask_t mask; /* The CPUs to which the IRQ may be allocated. */ - }; - --struct cris_irq_allocation irq_allocations[NR_IRQS] = -+struct cris_irq_allocation irq_allocations[NR_IRQS] = - {[0 ... NR_IRQS - 1] = {0, CPU_MASK_ALL}}; - --static unsigned long irq_regs[NR_CPUS] = -+static unsigned long irq_regs[NR_CPUS] = - { - regi_irq, - #ifdef CONFIG_SMP -@@ -79,9 +79,9 @@ - extern void kgdb_init(void); - extern void breakpoint(void); - --/* -- * Build the IRQ handler stubs using macros from irq.h. First argument is the -- * IRQ number, the second argument is the corresponding bit in -+/* -+ * Build the IRQ handler stubs using macros from irq.h. First argument is the -+ * IRQ number, the second argument is the corresponding bit in - * intr_rw_vect_mask found in asm/arch/hwregs/intr_vect_defs.h. - */ - BUILD_IRQ(0x31, (1 << 0)) /* memarb */ -@@ -139,7 +139,7 @@ - - spin_lock_irqsave(&irq_lock, flags); - intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); -- -+ - /* Remember; 1 let thru, 0 block. */ - intr_mask &= ~(1 << (irq - FIRST_IRQ)); - -@@ -152,10 +152,10 @@ - { - int intr_mask; - unsigned long flags; -- -+ - spin_lock_irqsave(&irq_lock, flags); - intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); -- -+ - /* Remember; 1 let thru, 0 block. */ - intr_mask |= (1 << (irq - FIRST_IRQ)); - -@@ -168,7 +168,7 @@ - { - int cpu; - unsigned long flags; -- -+ - spin_lock_irqsave(&irq_lock, flags); - cpu = irq_allocations[irq - FIRST_IRQ].cpu; - -@@ -178,12 +178,12 @@ - spin_unlock_irqrestore(&irq_lock, flags); - return smp_processor_id(); - } -- -+ - - /* Let the interrupt stay if possible */ - if (cpu_isset(cpu, irq_allocations[irq - FIRST_IRQ].mask)) - goto out; -- -+ - /* IRQ must be moved to another CPU. */ - cpu = first_cpu(irq_allocations[irq - FIRST_IRQ].mask); - irq_allocations[irq - FIRST_IRQ].cpu = cpu; -@@ -287,7 +287,7 @@ - * interrupt from the CPU and software has to sort out which - * interrupts that happened. There are two special cases here: - * -- * 1. Timer interrupts may never be blocked because of the -+ * 1. Timer interrupts may never be blocked because of the - * watchdog (refer to comment in include/asr/arch/irq.h) - * 2. GDB serial port IRQs are unhandled here and will be handled - * as a single IRQ when it strikes again because the GDB -@@ -304,33 +304,33 @@ - cpu = smp_processor_id(); - - /* An extra irq_enter here to prevent softIRQs to run after -- * each do_IRQ. This will decrease the interrupt latency. -+ * each do_IRQ. This will decrease the interrupt latency. - */ - irq_enter(); - - /* Get which IRQs that happend. */ - masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect); -- -+ - /* Calculate new IRQ mask with these IRQs disabled. */ - mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); - mask &= ~masked; - - /* Timer IRQ is never masked */ - if (masked & TIMER_MASK) -- mask |= TIMER_MASK; -+ mask |= TIMER_MASK; - - /* Block all the IRQs */ - REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask); -- -+ - /* Check for timer IRQ and handle it special. */ - if (masked & TIMER_MASK) { - masked &= ~TIMER_MASK; -- do_IRQ(TIMER_INTR_VECT, regs); -+ do_IRQ(TIMER_INTR_VECT, regs); - } - - #ifdef IGNORE_MASK - /* Remove IRQs that can't be handled as multiple. */ -- masked &= ~IGNORE_MASK; -+ masked &= ~IGNORE_MASK; - #endif - - /* Handle the rest of the IRQs. */ -@@ -377,7 +377,7 @@ - irq_desc[TIMER_INTR_VECT].status |= IRQ_PER_CPU; - irq_allocations[IPI_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED; - irq_desc[IPI_INTR_VECT].status |= IRQ_PER_CPU; -- -+ - set_exception_vector(0x00, nmi_interrupt); - set_exception_vector(0x30, multiple_interrupt); - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb.c 2005-07-06 11:40:49.000000000 +0200 -@@ -25,7 +25,7 @@ - * kgdb usage notes: - * ----------------- - * -- * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be -+ * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be - * built with different gcc flags: "-g" is added to get debug infos, and - * "-fomit-frame-pointer" is omitted to make debugging easier. Since the - * resulting kernel will be quite big (approx. > 7 MB), it will be stripped -@@ -118,7 +118,7 @@ - * call to kgdb_init() is necessary in order to allow any breakpoints - * or error conditions to be properly intercepted and reported to gdb. - * Two, a breakpoint needs to be generated to begin communication. This -- * is most easily accomplished by a call to breakpoint(). -+ * is most easily accomplished by a call to breakpoint(). - * - * The following gdb commands are supported: - * -@@ -382,8 +382,8 @@ - int getDebugChar(void); - - #ifdef CONFIG_ETRAXFS_SIM --int getDebugChar(void) --{ -+int getDebugChar(void) -+{ - return socketread(); - } - #endif -@@ -490,7 +490,7 @@ - - /********************************** Breakpoint *******************************/ - /* Use an internal stack in the breakpoint and interrupt response routines. -- FIXME: How do we know the size of this stack is enough? -+ FIXME: How do we know the size of this stack is enough? - Global so it can be reached from assembler code. */ - #define INTERNAL_STACK_SIZE 1024 - char internal_stack[INTERNAL_STACK_SIZE]; -@@ -511,7 +511,7 @@ - gdb_cris_strcpy(char *s1, const char *s2) - { - char *s = s1; -- -+ - for (s = s1; (*s++ = *s2++) != '\0'; ) - ; - return s1; -@@ -522,7 +522,7 @@ - gdb_cris_strlen(const char *s) - { - const char *sc; -- -+ - for (sc = s; *sc != '\0'; sc++) - ; - return (sc - s); -@@ -534,7 +534,7 @@ - { - const unsigned char uc = c; - const unsigned char *su; -- -+ - for (su = s; 0 < n; ++su, --n) - if (*su == uc) - return (void *)su; -@@ -549,15 +549,15 @@ - char *s1; - char *sd; - int x = 0; -- -+ - for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1) - x = x * base + (sd - hexchars); -- -+ - if (endptr) { - /* Unconverted suffix is stored in endptr unless endptr is NULL. */ - *endptr = s1; - } -- -+ - return x; - } - -@@ -629,7 +629,7 @@ - } else if (regno == PID) { - /* 32-bit register. */ - *valptr = *(unsigned int *)((char *)®.pid); -- -+ - } else if (regno == SRS) { - /* 8-bit register. */ - *valptr = (unsigned int)(*(unsigned char *)((char *)®.srs)); -@@ -726,7 +726,7 @@ - *buf++ = highhex (ch); - *buf++ = lowhex (ch); - } -- -+ - /* Terminate properly. */ - *buf = '\0'; - return buf; -@@ -804,7 +804,7 @@ - continue; - - buffer[count] = 0; -- -+ - if (ch == '#') { - xmitcsum = hex(getDebugChar()) << 4; - xmitcsum += hex(getDebugChar()); -@@ -836,7 +836,7 @@ - int checksum; - int runlen; - int encode; -- -+ - do { - char *src = buffer; - putDebugChar('$'); -@@ -905,42 +905,42 @@ - { - char *ptr = output_buffer; - unsigned int reg_cont; -- -+ - /* Send trap type (converted to signal) */ - -- *ptr++ = 'T'; -+ *ptr++ = 'T'; - *ptr++ = highhex(sigval); - *ptr++ = lowhex(sigval); - - if (((reg.exs & 0xff00) >> 8) == 0xc) { -- -+ - /* Some kind of hardware watchpoint triggered. Find which one - and determine its type (read/write/access). */ - int S, bp, trig_bits = 0, rw_bits = 0; - int trig_mask = 0; - unsigned int *bp_d_regs = &sreg.s3_3; - /* In a lot of cases, the stopped data address will simply be EDA. -- In some cases, we adjust it to match the watched data range. -+ In some cases, we adjust it to match the watched data range. - (We don't want to change the actual EDA though). */ - unsigned int stopped_data_address; - /* The S field of EXS. */ - S = (reg.exs & 0xffff0000) >> 16; -- -+ - if (S & 1) { - /* Instruction watchpoint. */ - /* FIXME: Check against, and possibly adjust reported EDA. */ - } else { - /* Data watchpoint. Find the one that triggered. */ - for (bp = 0; bp < 6; bp++) { -- -+ - /* Dx_RD, Dx_WR in the S field of EXS for this BP. */ - int bitpos_trig = 1 + bp * 2; - /* Dx_BPRD, Dx_BPWR in BP_CTRL for this BP. */ - int bitpos_config = 2 + bp * 4; -- -+ - /* Get read/write trig bits for this BP. */ - trig_bits = (S & (3 << bitpos_trig)) >> bitpos_trig; -- -+ - /* Read/write config bits for this BP. */ - rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config; - if (trig_bits) { -@@ -949,11 +949,11 @@ - if ((rw_bits == 0x1 && trig_bits != 0x1) || - (rw_bits == 0x2 && trig_bits != 0x2)) - panic("Invalid r/w trigging for this BP"); -- -+ - /* Mark this BP as trigged for future reference. */ - trig_mask |= (1 << bp); -- -- if (reg.eda >= bp_d_regs[bp * 2] && -+ -+ if (reg.eda >= bp_d_regs[bp * 2] && - reg.eda <= bp_d_regs[bp * 2 + 1]) { - /* EDA withing range for this BP; it must be the one - we're looking for. */ -@@ -972,7 +972,7 @@ - - /* Read/write config bits for this BP (needed later). */ - rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config; -- -+ - if (trig_mask & (1 << bp)) { - /* EDA within 31 bytes of the configured start address? */ - if (reg.eda + 31 >= bp_d_regs[bp * 2]) { -@@ -987,12 +987,12 @@ - } - } - } -- -+ - /* No match yet? */ - BUG_ON(bp >= 6); - /* Note that we report the type according to what the BP is configured - for (otherwise we'd never report an 'awatch'), not according to how -- it trigged. We did check that the trigged bits match what the BP is -+ it trigged. We did check that the trigged bits match what the BP is - configured for though. */ - if (rw_bits == 0x1) { - /* read */ -@@ -1110,12 +1110,12 @@ - - if (sigval == SIGTRAP) { - /* Break 8, single step or hardware breakpoint exception. */ -- -+ - /* Check IDX field of EXS. */ - if (((reg.exs & 0xff00) >> 8) == 0x18) { - - /* Break 8. */ -- -+ - /* Static (compiled) breakpoints must return to the next instruction - in order to avoid infinite loops (default value of ERP). Dynamic - (gdb-invoked) must subtract the size of the break instruction from -@@ -1132,7 +1132,7 @@ - reg.pc -= 2; - } - } -- -+ - } else if (((reg.exs & 0xff00) >> 8) == 0x3) { - /* Single step. */ - /* Don't fiddle with S1. */ -@@ -1190,10 +1190,10 @@ - unsigned int *bp_d_regs = &sreg.s3_3; - - /* The watchpoint allocation scheme is the simplest possible. -- For example, if a region is watched for read and -+ For example, if a region is watched for read and - a write watch is requested, a new watchpoint will - be used. Also, if a watch for a region that is already -- covered by one or more existing watchpoints, a new -+ covered by one or more existing watchpoints, a new - watchpoint will be used. */ - - /* First, find a free data watchpoint. */ -@@ -1205,13 +1205,13 @@ - break; - } - } -- -+ - if (bp > 5) { - /* We're out of watchpoints. */ - gdb_cris_strcpy(output_buffer, error_message[E04]); - return; - } -- -+ - /* Configure the control register first. */ - if (type == '3' || type == '4') { - /* Trigger on read. */ -@@ -1221,11 +1221,11 @@ - /* Trigger on write. */ - sreg.s0_3 |= (2 << (2 + bp * 4)); - } -- -+ - /* Ugly pointer arithmetics to configure the watched range. */ - bp_d_regs[bp * 2] = addr; - bp_d_regs[bp * 2 + 1] = (addr + len - 1); -- } -+ } - - /* Set the S1 flag to enable watchpoints. */ - reg.ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT)); -@@ -1258,7 +1258,7 @@ - /* Not in use. */ - gdb_cris_strcpy(output_buffer, error_message[E04]); - return; -- } -+ } - /* Deconfigure. */ - sreg.s1_3 = 0; - sreg.s2_3 = 0; -@@ -1268,8 +1268,8 @@ - unsigned int *bp_d_regs = &sreg.s3_3; - /* Try to find a watchpoint that is configured for the - specified range, then check that read/write also matches. */ -- -- /* Ugly pointer arithmetic, since I cannot rely on a -+ -+ /* Ugly pointer arithmetic, since I cannot rely on a - single switch (addr) as there may be several watchpoints with - the same start address for example. */ - -@@ -1279,7 +1279,7 @@ - /* Matching range. */ - int bitpos = 2 + bp * 4; - int rw_bits; -- -+ - /* Read/write bits for this BP. */ - rw_bits = (sreg.s0_3 & (0x3 << bitpos)) >> bitpos; - -@@ -1347,7 +1347,7 @@ - (char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)), - 16 * sizeof(unsigned int)); - break; -- } -+ } - case 'G': - /* Write registers. GXX..XX - Each byte of register data is described by two hex digits. -@@ -1357,11 +1357,11 @@ - hex2mem((char *)®, &input_buffer[1], sizeof(registers)); - /* Support registers. */ - hex2mem((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)), -- &input_buffer[1] + sizeof(registers), -+ &input_buffer[1] + sizeof(registers), - 16 * sizeof(unsigned int)); - gdb_cris_strcpy(output_buffer, "OK"); - break; -- -+ - case 'P': - /* Write register. Pn...=r... - Write register n..., hex value without 0x, with value r..., -@@ -1393,7 +1393,7 @@ - } - } - break; -- -+ - case 'm': - /* Read from memory. mAA..AA,LLLL - AA..AA is the address and LLLL is the length. -@@ -1416,7 +1416,7 @@ - mem2hex(output_buffer, addr, len); - } - break; -- -+ - case 'X': - /* Write to memory. XAA..AA,LLLL:XX..XX - AA..AA is the start address, LLLL is the number of bytes, and -@@ -1448,7 +1448,7 @@ - } - } - break; -- -+ - case 'c': - /* Continue execution. cAA..AA - AA..AA is the address where execution is resumed. If AA..AA is -@@ -1472,15 +1472,15 @@ - if ((sreg.s0_3 & 0x3fff) == 0) { - reg.ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT)); - } -- -+ - return; -- -+ - case 's': - /* Step. sAA..AA - AA..AA is the address where execution is resumed. If AA..AA is - omitted, resume at the present address. Success: return to the - executing thread. Failure: will never know. */ -- -+ - if (input_buffer[1] != '\0') { - /* FIXME: Doesn't handle address argument. */ - gdb_cris_strcpy(output_buffer, error_message[E04]); -@@ -1497,7 +1497,7 @@ - return; - - case 'Z': -- -+ - /* Insert breakpoint or watchpoint, Ztype,addr,length. - Remote protocol says: A remote target shall return an empty string - for an unrecognized breakpoint or watchpoint packet type. */ -@@ -1522,7 +1522,7 @@ - int addr = gdb_cris_strtol(&input_buffer[3], &lenptr, 16); - int len = gdb_cris_strtol(lenptr + 1, &dataptr, 16); - char type = input_buffer[1]; -- -+ - remove_watchpoint(type, addr, len); - break; - } -@@ -1537,14 +1537,14 @@ - output_buffer[2] = lowhex(sigval); - output_buffer[3] = 0; - break; -- -+ - case 'D': - /* Detach from host. D - Success: OK, and return to the executing thread. - Failure: will never know */ - putpacket("OK"); - return; -- -+ - case 'k': - case 'r': - /* kill request or reset request. -@@ -1552,7 +1552,7 @@ - Failure: will never know. */ - kill_restart(); - break; -- -+ - case 'C': - case 'S': - case '!': -@@ -1570,7 +1570,7 @@ - and ignored (below)? */ - gdb_cris_strcpy(output_buffer, error_message[E04]); - break; -- -+ - default: - /* The stub should ignore other request and send an empty - response ($#). This way we can extend the protocol and GDB -@@ -1587,7 +1587,7 @@ - { - reg_intr_vect_rw_mask intr_mask; - reg_ser_rw_intr_mask ser_intr_mask; -- -+ - /* Configure the kgdb serial port. */ - #if defined(CONFIG_ETRAX_KGDB_PORT0) - /* Note: no shortcut registered (not handled by multiple_interrupt). -@@ -1597,9 +1597,9 @@ - intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); - intr_mask.ser0 = 1; - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); -- -+ - ser_intr_mask = REG_RD(ser, regi_ser0, rw_intr_mask); -- ser_intr_mask.data_avail = regk_ser_yes; -+ ser_intr_mask.dav = regk_ser_yes; - REG_WR(ser, regi_ser0, rw_intr_mask, ser_intr_mask); - #elif defined(CONFIG_ETRAX_KGDB_PORT1) - /* Note: no shortcut registered (not handled by multiple_interrupt). -@@ -1609,9 +1609,9 @@ - intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); - intr_mask.ser1 = 1; - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); -- -+ - ser_intr_mask = REG_RD(ser, regi_ser1, rw_intr_mask); -- ser_intr_mask.data_avail = regk_ser_yes; -+ ser_intr_mask.dav = regk_ser_yes; - REG_WR(ser, regi_ser1, rw_intr_mask, ser_intr_mask); - #elif defined(CONFIG_ETRAX_KGDB_PORT2) - /* Note: no shortcut registered (not handled by multiple_interrupt). -@@ -1621,9 +1621,9 @@ - intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); - intr_mask.ser2 = 1; - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); -- -+ - ser_intr_mask = REG_RD(ser, regi_ser2, rw_intr_mask); -- ser_intr_mask.data_avail = regk_ser_yes; -+ ser_intr_mask.dav = regk_ser_yes; - REG_WR(ser, regi_ser2, rw_intr_mask, ser_intr_mask); - #elif defined(CONFIG_ETRAX_KGDB_PORT3) - /* Note: no shortcut registered (not handled by multiple_interrupt). -@@ -1635,7 +1635,7 @@ - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); - - ser_intr_mask = REG_RD(ser, regi_ser3, rw_intr_mask); -- ser_intr_mask.data_avail = regk_ser_yes; -+ ser_intr_mask.dav = regk_ser_yes; - REG_WR(ser, regi_ser3, rw_intr_mask, ser_intr_mask); - #endif - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb_asm.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb_asm.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb_asm.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb_asm.S 2006-10-13 14:43:13.000000000 +0200 -@@ -11,7 +11,7 @@ - .globl kgdb_handle_exception - - kgdb_handle_exception: -- -+ - ;; Create a register image of the caller. - ;; - ;; First of all, save the ACR on the stack since we need it for address calculations. -@@ -262,7 +262,7 @@ - ;; Nothing in S15, bank 3 - clear.d [$acr] - addq 4, $acr -- -+ - ;; Check what got us here: get IDX field of EXS. - move $exs, $r10 - and.d 0xff00, $r10 -@@ -307,7 +307,7 @@ - handle_comm: - move.d internal_stack+1020, $sp ; Use the internal stack which grows upwards - jsr handle_exception ; Interactive routine -- nop -+ nop - - ;; - ;; Return to the caller -@@ -345,7 +345,7 @@ - ;; Nothing in S6 - S7, bank 0. - addq 4, $acr - addq 4, $acr -- -+ - move.d [$acr], $r0 - move $r0, $s8 - addq 4, $acr -@@ -507,7 +507,7 @@ - addq 8, $acr - - ;; Skip BZ, VR. -- addq 2, $acr -+ addq 2, $acr - - move [$acr], $pid ; Restore PID - addq 4, $acr -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/pinmux.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/pinmux.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/pinmux.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/pinmux.c 2006-08-11 10:32:21.000000000 +0200 -@@ -1,7 +1,7 @@ --/* -+/* - * Allocator for I/O pins. All pins are allocated to GPIO at bootup. - * Unassigned pins and GPIO pins can be allocated to a fixed interface -- * or the I/O processor instead. -+ * or the I/O processor instead. - * - * Copyright (c) 2004 Axis Communications AB. - */ -@@ -33,9 +33,10 @@ - - if (!initialized) { - reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa); -+ REG_WR_INT(pinmux, regi_pinmux, rw_hwprot, 0); - initialized = 1; -- pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 = -- pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes; -+ pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 = -+ pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes; - REG_WR(pinmux, regi_pinmux, rw_pa, pa); - crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio); - crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio); -@@ -46,124 +47,137 @@ - return 0; - } - --int --crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode) -+/* -+ * must be called with the pinmux_lock held. -+ */ -+static int __crisv32_pinmux_alloc(int port, int first_pin, int last_pin, -+ enum pin_mode mode) - { - int i; -- unsigned long flags; - -- crisv32_pinmux_init(); -- -- if (port > PORTS) -+ if (port >= PORTS || -+ first_pin < 0 || last_pin >= PORT_PINS || last_pin < first_pin) - return -EINVAL; -- -- spin_lock_irqsave(&pinmux_lock, flags); -- -- for (i = first_pin; i <= last_pin; i++) -+ -+ for (i = first_pin; i <= last_pin; i++) - { -- if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) && -- (pins[port][i] != mode)) -+ if ((pins[port][i] != pinmux_none) -+ && (pins[port][i] != pinmux_gpio) -+ && (pins[port][i] != mode)) - { -- spin_unlock_irqrestore(&pinmux_lock, flags); - #ifdef DEBUG - panic("Pinmux alloc failed!\n"); - #endif - return -EPERM; - } - } -- -+ - for (i = first_pin; i <= last_pin; i++) - pins[port][i] = mode; - - crisv32_pinmux_set(port); -- -- spin_unlock_irqrestore(&pinmux_lock, flags); -- - return 0; - } - - int -+crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode) -+{ -+ int r; -+ unsigned long flags; -+ -+ crisv32_pinmux_init(); -+ -+ spin_lock_irqsave(&pinmux_lock, flags); -+ r = __crisv32_pinmux_alloc(port, first_pin, last_pin, mode); -+ spin_unlock_irqrestore(&pinmux_lock, flags); -+ return r; -+} -+ -+int - crisv32_pinmux_alloc_fixed(enum fixed_function function) - { - int ret = -EINVAL; - char saved[sizeof pins]; - unsigned long flags; -- -+ reg_pinmux_rw_hwprot hwprot; -+ -+ crisv32_pinmux_init(); -+ - spin_lock_irqsave(&pinmux_lock, flags); - - /* Save internal data for recovery */ - memcpy(saved, pins, sizeof pins); -- -- reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); -- -+ -+ hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); -+ - switch(function) - { - case pinmux_ser1: -- ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed); - hwprot.ser1 = regk_pinmux_yes; - break; - case pinmux_ser2: -- ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed); - hwprot.ser2 = regk_pinmux_yes; - break; - case pinmux_ser3: -- ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed); - hwprot.ser3 = regk_pinmux_yes; - break; - case pinmux_sser0: -- ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed); -- ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed); -+ ret |= __crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); - hwprot.sser0 = regk_pinmux_yes; - break; - case pinmux_sser1: -- ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); - hwprot.sser1 = regk_pinmux_yes; - break; - case pinmux_ata0: -- ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed); -- ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed); -+ ret |= __crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed); - hwprot.ata0 = regk_pinmux_yes; - break; - case pinmux_ata1: -- ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); -- ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); -+ ret |= __crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed); - hwprot.ata1 = regk_pinmux_yes; - break; - case pinmux_ata2: -- ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed); -- ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed); -+ ret |= __crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed); - hwprot.ata2 = regk_pinmux_yes; - break; - case pinmux_ata3: -- ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed); -- ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed); -+ ret |= __crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed); - hwprot.ata2 = regk_pinmux_yes; - break; - case pinmux_ata: -- ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed); -- ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed); -+ ret |= __crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed); - hwprot.ata = regk_pinmux_yes; - break; - case pinmux_eth1: -- ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed); - hwprot.eth1 = regk_pinmux_yes; - hwprot.eth1_mgm = regk_pinmux_yes; - break; - case pinmux_timer: -- ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); -+ ret = __crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); - hwprot.timer = regk_pinmux_yes; - spin_unlock_irqrestore(&pinmux_lock, flags); - return ret; - } -- -+ - if (!ret) - REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); - else - memcpy(pins, saved, sizeof pins); -- -- spin_unlock_irqrestore(&pinmux_lock, flags); -- -- return ret; -+ -+ spin_unlock_irqrestore(&pinmux_lock, flags); -+ -+ return ret; - } - - void -@@ -189,33 +203,126 @@ - #endif - } - --int --crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) -+/* -+ * must be called with the pinmux_lock held. -+ */ -+static int __crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) - { - int i; -+ -+ if (port > PORTS) -+ return -EINVAL; -+ -+ for (i = first_pin; i <= last_pin; i++) -+ pins[port][i] = pinmux_none; -+ -+ crisv32_pinmux_set(port); -+ -+ return 0; -+} -+ -+int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) -+{ -+ int r; - unsigned long flags; - - crisv32_pinmux_init(); -+ -+ spin_lock_irqsave(&pinmux_lock, flags); -+ r = __crisv32_pinmux_dealloc(port, first_pin, last_pin); -+ spin_unlock_irqrestore(&pinmux_lock, flags); -+ return r; -+} - -- if (port > PORTS) -- return -EINVAL; -+int -+crisv32_pinmux_dealloc_fixed(enum fixed_function function) -+{ -+ int ret = -EINVAL; -+ char saved[sizeof pins]; -+ unsigned long flags; - - spin_lock_irqsave(&pinmux_lock, flags); - -- for (i = first_pin; i <= last_pin; i++) -- pins[port][i] = pinmux_none; -+ /* Save internal data for recovery */ -+ memcpy(saved, pins, sizeof pins); -+ -+ reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); -+ -+ switch(function) -+ { -+ case pinmux_ser1: -+ ret = __crisv32_pinmux_dealloc(PORT_C, 4, 7); -+ hwprot.ser1 = regk_pinmux_no; -+ break; -+ case pinmux_ser2: -+ ret = __crisv32_pinmux_dealloc(PORT_C, 8, 11); -+ hwprot.ser2 = regk_pinmux_no; -+ break; -+ case pinmux_ser3: -+ ret = __crisv32_pinmux_dealloc(PORT_C, 12, 15); -+ hwprot.ser3 = regk_pinmux_no; -+ break; -+ case pinmux_sser0: -+ ret = __crisv32_pinmux_dealloc(PORT_C, 0, 3); -+ ret |= __crisv32_pinmux_dealloc(PORT_C, 16, 16); -+ hwprot.sser0 = regk_pinmux_no; -+ break; -+ case pinmux_sser1: -+ ret = __crisv32_pinmux_dealloc(PORT_D, 0, 4); -+ hwprot.sser1 = regk_pinmux_no; -+ break; -+ case pinmux_ata0: -+ ret = __crisv32_pinmux_dealloc(PORT_D, 5, 7); -+ ret |= __crisv32_pinmux_dealloc(PORT_D, 15, 17); -+ hwprot.ata0 = regk_pinmux_no; -+ break; -+ case pinmux_ata1: -+ ret = __crisv32_pinmux_dealloc(PORT_D, 0, 4); -+ ret |= __crisv32_pinmux_dealloc(PORT_E, 17, 17); -+ hwprot.ata1 = regk_pinmux_no; -+ break; -+ case pinmux_ata2: -+ ret = __crisv32_pinmux_dealloc(PORT_C, 11, 15); -+ ret |= __crisv32_pinmux_dealloc(PORT_E, 3, 3); -+ hwprot.ata2 = regk_pinmux_no; -+ break; -+ case pinmux_ata3: -+ ret = __crisv32_pinmux_dealloc(PORT_C, 8, 10); -+ ret |= __crisv32_pinmux_dealloc(PORT_C, 0, 2); -+ hwprot.ata2 = regk_pinmux_no; -+ break; -+ case pinmux_ata: -+ ret = __crisv32_pinmux_dealloc(PORT_B, 0, 15); -+ ret |= __crisv32_pinmux_dealloc(PORT_D, 8, 15); -+ hwprot.ata = regk_pinmux_no; -+ break; -+ case pinmux_eth1: -+ ret = __crisv32_pinmux_dealloc(PORT_E, 0, 17); -+ hwprot.eth1 = regk_pinmux_no; -+ hwprot.eth1_mgm = regk_pinmux_no; -+ break; -+ case pinmux_timer: -+ ret = __crisv32_pinmux_dealloc(PORT_C, 16, 16); -+ hwprot.timer = regk_pinmux_no; -+ spin_unlock_irqrestore(&pinmux_lock, flags); -+ return ret; -+ } -+ -+ if (!ret) -+ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); -+ else -+ memcpy(pins, saved, sizeof pins); - -- crisv32_pinmux_set(port); - spin_unlock_irqrestore(&pinmux_lock, flags); -- -- return 0; -+ -+ return ret; - } - - void - crisv32_pinmux_dump(void) - { - int i, j; -- -+ - crisv32_pinmux_init(); - - for (i = 0; i < PORTS; i++) -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/process.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/process.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/process.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/process.c 2006-10-13 14:43:13.000000000 +0200 -@@ -74,9 +74,9 @@ - #else - { - reg_timer_rw_wd_ctrl wd_ctrl = {0}; -- -+ - stop_watchdog(); -- -+ - wd_ctrl.key = 16; /* Arbitrary key. */ - wd_ctrl.cnt = 1; /* Minimum time. */ - wd_ctrl.cmd = regk_timer_start; -@@ -141,7 +141,7 @@ - { - struct pt_regs *childregs; - struct switch_stack *swstack; -- -+ - /* - * Put the pt_regs structure at the end of the new kernel stack page and - * fix it up. Note: the task_struct doubles as the kernel stack for the -@@ -152,7 +152,7 @@ - p->set_child_tid = p->clear_child_tid = NULL; - childregs->r10 = 0; /* Child returns 0 after a fork/clone. */ - -- /* Set a new TLS ? -+ /* Set a new TLS ? - * The TLS is in $mof beacuse it is the 5th argument to sys_clone. - */ - if (p->mm && (clone_flags & CLONE_SETTLS)) { -@@ -165,20 +165,20 @@ - /* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */ - swstack->r9 = 0; - -- /* -+ /* - * We want to return into ret_from_sys_call after the _resume. - * ret_from_fork will call ret_from_sys_call. - */ - swstack->return_ip = (unsigned long) ret_from_fork; -- -+ - /* Fix the user-mode and kernel-mode stackpointer. */ -- p->thread.usp = usp; -+ p->thread.usp = usp; - p->thread.ksp = (unsigned long) swstack; - - return 0; - } - --/* -+/* - * Be aware of the "magic" 7th argument in the four system-calls below. - * They need the latest stackframe, which is put as the 7th argument by - * entry.S. The previous arguments are dummies or actually used, but need -@@ -200,7 +200,7 @@ - - /* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */ - asmlinkage int --sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid, -+sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid, - unsigned long tls, long srp, struct pt_regs *regs) - { - if (!newusp) -@@ -209,11 +209,11 @@ - return do_fork(flags, newusp, regs, 0, parent_tid, child_tid); - } - --/* -+/* - * vfork is a system call in i386 because of register-pressure - maybe - * we can remove it and handle it in libc but we put it here until then. - */ --asmlinkage int -+asmlinkage int - sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp, - struct pt_regs *regs) - { -@@ -222,7 +222,7 @@ - - /* sys_execve() executes a new program. */ - asmlinkage int --sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp, -+sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp, - struct pt_regs *regs) - { - int error; -@@ -254,13 +254,13 @@ - unsigned long usp = rdusp(); - printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", - regs->erp, regs->srp, regs->ccs, usp, regs->mof); -- -+ - printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", - regs->r0, regs->r1, regs->r2, regs->r3); -- -+ - printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", - regs->r4, regs->r5, regs->r6, regs->r7); -- -+ - printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", - regs->r8, regs->r9, regs->r10, regs->r11); - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/ptrace.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/ptrace.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/ptrace.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/ptrace.c 2006-03-22 10:56:56.000000000 +0100 -@@ -20,7 +20,7 @@ - #include - #include - --/* -+/* - * Determines which bits in CCS the user has access to. - * 1 = access, 0 = no access. - */ -@@ -84,7 +84,7 @@ - * - * Make sure the single step bit is not set. - */ --void -+void - ptrace_disable(struct task_struct *child) - { - unsigned long tmp; -@@ -105,7 +105,7 @@ - unsigned long __user *datap = (unsigned long __user *)data; - - switch (request) { -- /* Read word at location address. */ -+ /* Read word at location address. */ - case PTRACE_PEEKTEXT: - case PTRACE_PEEKDATA: { - unsigned long tmp; -@@ -122,11 +122,11 @@ - tmp = *(unsigned long*)addr; - } else { - copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); -- -+ - if (copied != sizeof(tmp)) - break; - } -- -+ - ret = put_user(tmp,datap); - break; - } -@@ -143,18 +143,18 @@ - ret = put_user(tmp, datap); - break; - } -- -+ - /* Write the word at location address. */ - case PTRACE_POKETEXT: - case PTRACE_POKEDATA: - ret = 0; -- -+ - if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data)) - break; -- -+ - ret = -EIO; - break; -- -+ - /* Write the word at location address in the USER area. */ - case PTRACE_POKEUSR: - ret = -EIO; -@@ -178,10 +178,10 @@ - case PTRACE_SYSCALL: - case PTRACE_CONT: - ret = -EIO; -- -+ - if (!valid_signal(data)) - break; -- -+ - /* Continue means no single-step. */ - put_reg(child, PT_SPC, 0); - -@@ -198,27 +198,27 @@ - else { - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - } -- -+ - child->exit_code = data; -- -+ - /* TODO: make sure any pending breakpoint is killed */ - wake_up_process(child); - ret = 0; -- -+ - break; -- -+ - /* Make the child exit by sending it a sigkill. */ - case PTRACE_KILL: - ret = 0; -- -+ - if (child->exit_state == EXIT_ZOMBIE) - break; -- -+ - child->exit_code = SIGKILL; -- -+ - /* Deconfigure single-step and h/w bp. */ - ptrace_disable(child); -- -+ - /* TODO: make sure any pending breakpoint is killed */ - wake_up_process(child); - break; -@@ -227,7 +227,7 @@ - case PTRACE_SINGLESTEP: { - unsigned long tmp; - ret = -EIO; -- -+ - /* Set up SPC if not set already (in which case we have - no other choice but to trust it). */ - if (!get_reg(child, PT_SPC)) { -@@ -240,7 +240,7 @@ - - if (!valid_signal(data)) - break; -- -+ - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - - /* TODO: set some clever breakpoint mechanism... */ -@@ -259,15 +259,15 @@ - case PTRACE_GETREGS: { - int i; - unsigned long tmp; -- -+ - for (i = 0; i <= PT_MAX; i++) { - tmp = get_reg(child, i); -- -+ - if (put_user(tmp, datap)) { - ret = -EFAULT; - goto out_tsk; - } -- -+ - datap++; - } - -@@ -279,22 +279,22 @@ - case PTRACE_SETREGS: { - int i; - unsigned long tmp; -- -+ - for (i = 0; i <= PT_MAX; i++) { - if (get_user(tmp, datap)) { - ret = -EFAULT; - goto out_tsk; - } -- -+ - if (i == PT_CCS) { - tmp &= CCS_MASK; - tmp |= get_reg(child, PT_CCS) & ~CCS_MASK; - } -- -+ - put_reg(child, i, tmp); - datap++; - } -- -+ - ret = 0; - break; - } -@@ -304,6 +304,7 @@ - break; - } - -+out_tsk: - return ret; - } - -@@ -311,15 +312,15 @@ - { - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; -- -+ - if (!(current->ptrace & PT_PTRACED)) - return; -- -+ - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); -- -+ - /* - * This isn't the same as continuing with a signal, but it will do for - * normal use. -@@ -338,7 +339,7 @@ - int copied; - int opsize = 0; - -- /* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */ -+ /* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */ - copied = access_process_vm(child, pc, &opcode, sizeof(opcode), 0); - if (copied != sizeof(opcode)) - return 0; -@@ -361,7 +362,7 @@ - opsize = 6; - break; - default: -- panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n", -+ panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n", - opcode, pc); - } - -@@ -378,7 +379,7 @@ - /* Delay slot bit set. Report as stopped on proper - instruction. */ - if (spc) { -- /* Rely on SPC if set. FIXME: We might want to check -+ /* Rely on SPC if set. FIXME: We might want to check - that EXS indicates we stopped due to a single-step - exception. */ - pc = spc; -@@ -422,7 +423,7 @@ - register int old_srs; - - #ifdef CONFIG_ETRAX_KGDB -- /* Ignore write, but pretend it was ok if value is 0 -+ /* Ignore write, but pretend it was ok if value is 0 - (we don't want POKEUSR/SETREGS failing unnessecarily). */ - return (data == 0) ? ret : -1; - #endif -@@ -431,7 +432,7 @@ - if (!bp_owner) - bp_owner = pid; - else if (bp_owner != pid) { -- /* Ignore write, but pretend it was ok if value is 0 -+ /* Ignore write, but pretend it was ok if value is 0 - (we don't want POKEUSR/SETREGS failing unnessecarily). */ - return (data == 0) ? ret : -1; - } -@@ -440,7 +441,7 @@ - SPEC_REG_RD(SPEC_REG_SRS, old_srs); - /* Switch to BP bank. */ - SUPP_BANK_SEL(BANK_BP); -- -+ - switch (regno - PT_BP) { - case 0: - SUPP_REG_WR(0, data); break; -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/setup.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/setup.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/setup.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/setup.c 2006-10-13 14:43:13.000000000 +0200 -@@ -40,12 +40,12 @@ - - {"ETRAX 100LX", 10, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB - | HAS_MMU | HAS_MMU_BUG}, -- -+ - {"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB - | HAS_MMU}, -- -+ - {"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU}, -- -+ - {"Unknown", 0, 0, 0} - }; - -@@ -67,7 +67,7 @@ - #endif - - revision = rdvr(); -- -+ - for (i = 0; i < entries; i++) { - if (cpinfo[i].rev == revision) { - info = &cpinfo[i]; -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/signal.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/signal.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/signal.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/signal.c 2006-03-22 10:56:56.000000000 +0100 -@@ -50,7 +50,7 @@ - unsigned char retcode[8]; /* Trampoline code. */ - }; - --int do_signal(int restart, sigset_t *oldset, struct pt_regs *regs); -+void do_signal(int restart, struct pt_regs *regs); - void keep_debug_flags(unsigned long oldccs, unsigned long oldspc, - struct pt_regs *regs); - /* -@@ -61,74 +61,16 @@ - sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof, - long srp, struct pt_regs *regs) - { -- sigset_t saveset; -- - mask &= _BLOCKABLE; -- - spin_lock_irq(¤t->sighand->siglock); -- -- saveset = current->blocked; -- -+ current->saved_sigmask = current->blocked; - siginitset(¤t->blocked, mask); -- - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); -- -- regs->r10 = -EINTR; -- -- while (1) { -- current->state = TASK_INTERRUPTIBLE; -- schedule(); -- -- if (do_signal(0, &saveset, regs)) { -- /* -- * This point is reached twice: once to call -- * the signal handler, then again to return -- * from the sigsuspend system call. When -- * calling the signal handler, R10 hold the -- * signal number as set by do_signal(). The -- * sigsuspend call will always return with -- * the restored value above; -EINTR. -- */ -- return regs->r10; -- } -- } --} -- --/* Define some dummy arguments to be able to reach the regs argument. */ --int --sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13, -- long mof, long srp, struct pt_regs *regs) --{ -- sigset_t saveset; -- sigset_t newset; -- -- if (sigsetsize != sizeof(sigset_t)) -- return -EINVAL; -- -- if (copy_from_user(&newset, unewset, sizeof(newset))) -- return -EFAULT; -- -- sigdelsetmask(&newset, ~_BLOCKABLE); -- spin_lock_irq(¤t->sighand->siglock); -- -- saveset = current->blocked; -- current->blocked = newset; -- -- recalc_sigpending(); -- spin_unlock_irq(¤t->sighand->siglock); -- -- regs->r10 = -EINTR; -- -- while (1) { -- current->state = TASK_INTERRUPTIBLE; -- schedule(); -- -- if (do_signal(0, &saveset, regs)) { -- /* See comment in function above. */ -- return regs->r10; -- } -- } -+ current->state = TASK_INTERRUPTIBLE; -+ schedule(); -+ set_thread_flag(TIF_RESTORE_SIGMASK); -+ return -ERESTARTNOHAND; - } - - int -@@ -263,7 +205,7 @@ - unsigned long oldccs = regs->ccs; - - frame = (struct rt_signal_frame *) rdusp(); -- -+ - /* - * Since the signal is stacked on a dword boundary, the frame - * should be dword aligned here as well. It it's not, then the -@@ -285,7 +227,7 @@ - - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); -- -+ - if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) - goto badframe; - -@@ -311,7 +253,7 @@ - - err = 0; - usp = rdusp(); -- -+ - /* - * Copy the registers. They are located first in sc, so it's - * possible to use sc directly. -@@ -351,7 +293,7 @@ - * which performs the syscall sigreturn(), or a provided user-mode - * trampoline. - */ --static void -+static int - setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, - struct pt_regs * regs) - { -@@ -388,7 +330,7 @@ - /* Trampoline - the desired return ip is in the signal return page. */ - return_ip = cris_signal_return_page; - -- /* -+ /* - * This is movu.w __NR_sigreturn, r9; break 13; - * - * WE DO NOT USE IT ANY MORE! It's only left here for historical -@@ -402,7 +344,7 @@ - - if (err) - goto give_sigsegv; -- -+ - /* - * Set up registers for signal handler. - * -@@ -417,16 +359,17 @@ - /* Actually move the USP to reflect the stacked frame. */ - wrusp((unsigned long)frame); - -- return; -+ return 0; - - give_sigsegv: - if (sig == SIGSEGV) - ka->sa.sa_handler = SIG_DFL; -- -+ - force_sig(SIGSEGV, current); -+ return -EFAULT; - } - --static void -+static int - setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs * regs) - { -@@ -441,11 +384,11 @@ - goto give_sigsegv; - - /* TODO: what is the current->exec_domain stuff and invmap ? */ -- -+ - err |= __put_user(&frame->info, &frame->pinfo); - err |= __put_user(&frame->uc, &frame->puc); - err |= copy_siginfo_to_user(&frame->info, info); -- -+ - if (err) - goto give_sigsegv; - -@@ -467,7 +410,7 @@ - /* Trampoline - the desired return ip is in the signal return page. */ - return_ip = cris_signal_return_page + 6; - -- /* -+ /* - * This is movu.w __NR_rt_sigreturn, r9; break 13; - * - * WE DO NOT USE IT ANY MORE! It's only left here for historical -@@ -478,7 +421,7 @@ - - err |= __put_user(__NR_rt_sigreturn, - (short __user*)(frame->retcode+2)); -- -+ - err |= __put_user(0xe93d, (short __user*)(frame->retcode+4)); - } - -@@ -503,21 +446,24 @@ - /* Actually move the usp to reflect the stacked frame. */ - wrusp((unsigned long)frame); - -- return; -+ return 0; - - give_sigsegv: - if (sig == SIGSEGV) - ka->sa.sa_handler = SIG_DFL; -- -+ - force_sig(SIGSEGV, current); -+ return -EFAULT; - } - - /* Invoke a singal handler to, well, handle the signal. */ --static inline void -+static inline int - handle_signal(int canrestart, unsigned long sig, - siginfo_t *info, struct k_sigaction *ka, - sigset_t *oldset, struct pt_regs * regs) - { -+ int ret; -+ - /* Check if this got called from a system call. */ - if (canrestart) { - /* If so, check system call restarting. */ -@@ -561,19 +507,23 @@ - - /* Set up the stack frame. */ - if (ka->sa.sa_flags & SA_SIGINFO) -- setup_rt_frame(sig, ka, info, oldset, regs); -+ ret = setup_rt_frame(sig, ka, info, oldset, regs); - else -- setup_frame(sig, ka, oldset, regs); -+ ret = setup_frame(sig, ka, oldset, regs); - - if (ka->sa.sa_flags & SA_ONESHOT) - ka->sa.sa_handler = SIG_DFL; - -- spin_lock_irq(¤t->sighand->siglock); -- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); -- if (!(ka->sa.sa_flags & SA_NODEFER)) -- sigaddset(¤t->blocked,sig); -- recalc_sigpending(); -- spin_unlock_irq(¤t->sighand->siglock); -+ if (ret == 0) { -+ spin_lock_irq(¤t->sighand->siglock); -+ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); -+ if (!(ka->sa.sa_flags & SA_NODEFER)) -+ sigaddset(¤t->blocked,sig); -+ recalc_sigpending(); -+ spin_unlock_irq(¤t->sighand->siglock); -+ } -+ -+ return ret; - } - - /* -@@ -587,12 +537,13 @@ - * we can use user_mode(regs) to see if we came directly from kernel or user - * mode below. - */ --int --do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs) -+void -+do_signal(int canrestart, struct pt_regs *regs) - { - int signr; - siginfo_t info; - struct k_sigaction ka; -+ sigset_t *oldset; - - /* - * The common case should go fast, which is why this point is -@@ -600,17 +551,27 @@ - * without doing anything. - */ - if (!user_mode(regs)) -- return 1; -+ return; - -- if (!oldset) -+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) -+ oldset = ¤t->saved_sigmask; -+ else - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, NULL); -- -+ - if (signr > 0) { -- /* Deliver the signal. */ -- handle_signal(canrestart, signr, &info, &ka, oldset, regs); -- return 1; -+ /* Whee! Actually deliver the signal. */ -+ if (handle_signal(canrestart, signr, &info, &ka, oldset, regs)) { -+ /* a signal was successfully delivered; the saved -+ * sigmask will have been stored in the signal frame, -+ * and will be restored by sigreturn, so we can simply -+ * clear the TIF_RESTORE_SIGMASK flag */ -+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) -+ clear_thread_flag(TIF_RESTORE_SIGMASK); -+ } -+ -+ return; - } - - /* Got here from a system call? */ -@@ -621,14 +582,19 @@ - regs->r10 == -ERESTARTNOINTR) { - RESTART_CRIS_SYS(regs); - } -- -+ - if (regs->r10 == -ERESTART_RESTARTBLOCK){ - regs->r10 = __NR_restart_syscall; - regs->erp -= 2; - } - } -- -- return 0; -+ -+ /* if there's no signal to deliver, we just put the saved sigmask -+ * back */ -+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) { -+ clear_thread_flag(TIF_RESTORE_SIGMASK); -+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); -+ } - } - - asmlinkage void -@@ -651,7 +617,7 @@ - sys_kill(ti->task->pid, sig); - } - --void -+void - keep_debug_flags(unsigned long oldccs, unsigned long oldspc, - struct pt_regs *regs) - { -@@ -666,7 +632,7 @@ - regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT)); - /* Assume the SPC is valid and interesting. */ - regs->spc = oldspc; -- -+ - } else if (oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT))) { - /* If a h/w bp was set in the signal handler we need - to keep the S flag. */ -@@ -679,7 +645,7 @@ - have forgotten all about it. */ - regs->spc = 0; - regs->ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT)); -- } -+ } - } - - /* Set up the trampolines on the signal return page. */ -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/smp.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/smp.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/smp.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/smp.c 2007-01-09 10:29:19.000000000 +0100 -@@ -20,6 +20,7 @@ - #define IPI_SCHEDULE 1 - #define IPI_CALL 2 - #define IPI_FLUSH_TLB 4 -+#define IPI_BOOT 8 - - #define FLUSH_ALL (void*)0xffffffff - -@@ -30,6 +31,8 @@ - cpumask_t cpu_online_map = CPU_MASK_NONE; - EXPORT_SYMBOL(cpu_online_map); - cpumask_t phys_cpu_present_map = CPU_MASK_NONE; -+cpumask_t cpu_possible_map; -+EXPORT_SYMBOL(cpu_possible_map); - EXPORT_SYMBOL(phys_cpu_present_map); - - /* Variables used during SMP boot */ -@@ -55,7 +58,7 @@ - extern int setup_irq(int, struct irqaction *); - - /* Mode registers */ --static unsigned long irq_regs[NR_CPUS] = -+static unsigned long irq_regs[NR_CPUS] = - { - regi_irq, - regi_irq2 -@@ -97,6 +100,7 @@ - - cpu_set(0, cpu_online_map); - cpu_set(0, phys_cpu_present_map); -+ cpu_set(0, cpu_possible_map); - } - - void __init smp_cpus_done(unsigned int max_cpus) -@@ -109,6 +113,7 @@ - { - unsigned timeout; - struct task_struct *idle; -+ cpumask_t cpu_mask = CPU_MASK_NONE; - - idle = fork_idle(cpuid); - if (IS_ERR(idle)) -@@ -120,6 +125,12 @@ - smp_init_current_idle_thread = task_thread_info(idle); - cpu_now_booting = cpuid; - -+ /* Kick it */ -+ cpu_set(cpuid, cpu_online_map); -+ cpu_set(cpuid, cpu_mask); -+ send_ipi(IPI_BOOT, 0, cpu_mask); -+ cpu_clear(cpuid, cpu_online_map); -+ - /* Wait for CPU to come online */ - for (timeout = 0; timeout < 10000; timeout++) { - if(cpu_online(cpuid)) { -@@ -142,7 +153,7 @@ - * specific stuff such as the local timer and the MMU. */ - void __init smp_callin(void) - { -- extern void cpu_idle(void); -+ extern void cpu_idle(void); - - int cpu = cpu_now_booting; - reg_intr_vect_rw_mask vect_mask = {0}; -@@ -190,8 +201,8 @@ - - /* cache_decay_ticks is used by the scheduler to decide if a process - * is "hot" on one CPU. A higher value means a higher penalty to move -- * a process to another CPU. Our cache is rather small so we report -- * 1 tick. -+ * a process to another CPU. Our cache is rather small so we report -+ * 1 tick. - */ - unsigned long cache_decay_ticks = 1; - -@@ -205,14 +216,14 @@ - { - cpumask_t cpu_mask = CPU_MASK_NONE; - cpu_set(cpu, cpu_mask); -- send_ipi(IPI_SCHEDULE, 0, cpu_mask); -+ send_ipi(IPI_SCHEDULE, 0, cpu_mask); - } - - /* TLB flushing - * - * Flush needs to be done on the local CPU and on any other CPU that - * may have the same mapping. The mm->cpu_vm_mask is used to keep track -- * of which CPUs that a specific process has been executed on. -+ * of which CPUs that a specific process has been executed on. - */ - void flush_tlb_common(struct mm_struct* mm, struct vm_area_struct* vma, unsigned long addr) - { -@@ -244,7 +255,7 @@ - cpu_set(smp_processor_id(), mm->cpu_vm_mask); - } - --void flush_tlb_page(struct vm_area_struct *vma, -+void flush_tlb_page(struct vm_area_struct *vma, - unsigned long addr) - { - __flush_tlb_page(vma, addr); -@@ -252,8 +263,8 @@ - } - - /* Inter processor interrupts -- * -- * The IPIs are used for: -+ * -+ * The IPIs are used for: - * * Force a schedule on a CPU - * * FLush TLB on other CPUs - * * Call a function on other CPUs -@@ -341,7 +352,7 @@ - else if (flush_vma == FLUSH_ALL) - __flush_tlb_mm(flush_mm); - else -- __flush_tlb_page(flush_vma, flush_addr); -+ __flush_tlb_page(flush_vma, flush_addr); - } - - ipi.vector = 0; -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/time.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/time.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/time.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/time.c 2007-01-09 10:29:19.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: time.c,v 1.19 2005/04/29 05:40:09 starvik Exp $ -+/* $Id: time.c,v 1.25 2007/01/09 09:29:19 starvik Exp $ - * - * linux/arch/cris/arch-v32/kernel/time.c - * -@@ -14,12 +14,14 @@ - #include - #include - #include -+#include - #include - #include - #include - #include - #include - #include -+#include - - #include - #include -@@ -31,7 +33,7 @@ - #define ETRAX_WD_HZ 763 /* watchdog counts at 763 Hz */ - #define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1) /* Number of 763 counts before watchdog bites */ - --unsigned long timer_regs[NR_CPUS] = -+unsigned long timer_regs[NR_CPUS] = - { - regi_timer, - #ifdef CONFIG_SMP -@@ -44,6 +46,15 @@ - extern int setup_irq(int, struct irqaction *); - extern int have_rtc; - -+#ifdef CONFIG_CPU_FREQ -+static int -+cris_time_freq_notifier(struct notifier_block *nb, unsigned long val, void *data); -+ -+static struct notifier_block cris_time_freq_notifier_block = { -+ .notifier_call = cris_time_freq_notifier -+}; -+#endif -+ - unsigned long get_ns_in_jiffie(void) - { - reg_timer_r_tmr0_data data; -@@ -63,7 +74,7 @@ - static unsigned long jiffies_p = 0; - - /* -- * cache volatile jiffies temporarily; we have IRQs turned off. -+ * cache volatile jiffies temporarily; we have IRQs turned off. - */ - unsigned long jiffies_t; - -@@ -82,7 +93,7 @@ - */ - if( jiffies_t == jiffies_p ) { - if( count > count_p ) { -- /* Timer wrapped, use new count and prescale -+ /* Timer wrapped, use new count and prescale - * increase the time corresponding to one jiffie - */ - usec_count = 1000000/HZ; -@@ -101,7 +112,7 @@ - * The watchdog timer is an 8-bit timer with a configurable start value. - * Once started the whatchdog counts downwards with a frequency of 763 Hz - * (100/131072 MHz). When the watchdog counts down to 1, it generates an -- * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the -+ * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the - * chip. - */ - /* This gives us 1.3 ms to do something useful when the NMI comes */ -@@ -124,7 +135,7 @@ - { - #if defined(CONFIG_ETRAX_WATCHDOG) - reg_timer_rw_wd_ctrl wd_ctrl = { 0 }; -- -+ - /* only keep watchdog happy as long as we have memory left! */ - if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) { - /* reset the watchdog with the inverse of the old key */ -@@ -139,7 +150,7 @@ - - /* stop the watchdog - we still need the correct key */ - --void -+void - stop_watchdog(void) - { - #if defined(CONFIG_ETRAX_WATCHDOG) -@@ -149,7 +160,7 @@ - wd_ctrl.cmd = regk_timer_stop; - wd_ctrl.key = watchdog_key; - REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl); --#endif -+#endif - } - - extern void show_registers(struct pt_regs *regs); -@@ -160,7 +171,8 @@ - #if defined(CONFIG_ETRAX_WATCHDOG) - extern int cause_of_death; - -- raw_printk("Watchdog bite\n"); -+ oops_in_progress = 1; -+ printk("Watchdog bite\n"); - - /* Check if forced restart or unexpected watchdog */ - if (cause_of_death == 0xbedead) { -@@ -169,8 +181,9 @@ - - /* Unexpected watchdog, stop the watchdog and dump registers*/ - stop_watchdog(); -- raw_printk("Oops: bitten by watchdog\n"); -- show_registers(regs); -+ printk("Oops: bitten by watchdog\n"); -+ show_registers(regs); -+ oops_in_progress = 0; - #ifndef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY - reset_watchdog(); - #endif -@@ -191,8 +204,9 @@ - extern void cris_do_profile(struct pt_regs *regs); - - static inline irqreturn_t --timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+timer_interrupt(int irq, void *dev_id) - { -+ struct pt_regs* regs = get_irq_regs(); - int cpu = smp_processor_id(); - reg_timer_r_masked_intr masked_intr; - reg_timer_rw_ack_intr ack_intr = { 0 }; -@@ -226,7 +240,7 @@ - * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be - * called as close as possible to 500 ms before the new second starts. - * -- * The division here is not time critical since it will run once in -+ * The division here is not time critical since it will run once in - * 11 minutes - */ - if ((time_status & STA_UNSYNC) == 0 && -@@ -246,7 +260,7 @@ - */ - - static struct irqaction irq_timer = { -- .mask = timer_interrupt, -+ .handler = timer_interrupt, - .flags = IRQF_SHARED | IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "timer" -@@ -262,7 +276,7 @@ - - /* Setup the etrax timers - * Base frequency is 100MHz, divider 1000000 -> 100 HZ -- * We use timer0, so timer1 is free. -+ * We use timer0, so timer1 is free. - * The trig timer is used by the fasttimer API if enabled. - */ - -@@ -284,11 +298,11 @@ - { - reg_intr_vect_rw_mask intr_mask; - -- /* probe for the RTC and read it if it exists -- * Before the RTC can be probed the loops_per_usec variable needs -- * to be initialized to make usleep work. A better value for -- * loops_per_usec is calculated by the kernel later once the -- * clock has started. -+ /* probe for the RTC and read it if it exists -+ * Before the RTC can be probed the loops_per_usec variable needs -+ * to be initialized to make usleep work. A better value for -+ * loops_per_usec is calculated by the kernel later once the -+ * clock has started. - */ - loops_per_usec = 50; - -@@ -297,7 +311,7 @@ - xtime.tv_sec = 0; - xtime.tv_nsec = 0; - have_rtc = 0; -- } else { -+ } else { - /* get the current time */ - have_rtc = 1; - update_xtime_from_cmos(); -@@ -316,9 +330,9 @@ - intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); - intr_mask.timer = 1; - REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); -- -+ - /* now actually register the timer irq handler that calls timer_interrupt() */ -- -+ - setup_irq(TIMER_INTR_VECT, &irq_timer); - - /* enable watchdog if we should use one */ -@@ -330,10 +344,7 @@ - /* If we use the hardware watchdog, we want to trap it as an NMI - and dump registers before it resets us. For this to happen, we - must set the "m" NMI enable flag (which once set, is unset only -- when an NMI is taken). -- -- The same goes for the external NMI, but that doesn't have any -- driver or infrastructure support yet. */ -+ when an NMI is taken). */ - { - unsigned long flags; - local_save_flags(flags); -@@ -341,4 +352,27 @@ - local_irq_restore(flags); - } - #endif -+ -+#ifdef CONFIG_CPU_FREQ -+ cpufreq_register_notifier(&cris_time_freq_notifier_block, -+ CPUFREQ_TRANSITION_NOTIFIER); -+#endif -+} -+ -+#ifdef CONFIG_CPU_FREQ -+static int -+cris_time_freq_notifier(struct notifier_block *nb, unsigned long val, void *data) -+{ -+ struct cpufreq_freqs *freqs = data; -+ if (val == CPUFREQ_POSTCHANGE) { -+ reg_timer_r_tmr0_data data; -+ reg_timer_rw_tmr0_div div = (freqs->new * 500) / HZ; -+ do -+ { -+ data = REG_RD(timer, timer_regs[freqs->cpu], r_tmr0_data); -+ } while (data > 20); -+ REG_WR(timer, timer_regs[freqs->cpu], rw_tmr0_div, div); -+ } -+ return 0; - } -+#endif -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/traps.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/traps.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/traps.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/traps.c 2006-12-11 14:04:24.000000000 +0100 -@@ -1,50 +1,43 @@ - /* -- * Copyright (C) 2003, Axis Communications AB. -+ * Copyright (C) 2003-2006, Axis Communications AB. - */ - - #include - #include -- - #include -- --extern void reset_watchdog(void); --extern void stop_watchdog(void); -- --extern int raw_printk(const char *fmt, ...); -+#include - - void - show_registers(struct pt_regs *regs) - { - /* - * It's possible to use either the USP register or current->thread.usp. -- * USP might not correspond to the current proccess for all cases this -+ * USP might not correspond to the current process for all cases this - * function is called, and current->thread.usp isn't up to date for the -- * current proccess. Experience shows that using USP is the way to go. -+ * current process. Experience shows that using USP is the way to go. - */ -- unsigned long usp; -+ unsigned long usp = rdusp(); - unsigned long d_mmu_cause; - unsigned long i_mmu_cause; - -- usp = rdusp(); -+ printk("CPU: %d\n", smp_processor_id()); - -- raw_printk("CPU: %d\n", smp_processor_id()); -+ printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", -+ regs->erp, regs->srp, regs->ccs, usp, regs->mof); - -- raw_printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", -- regs->erp, regs->srp, regs->ccs, usp, regs->mof); -+ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", -+ regs->r0, regs->r1, regs->r2, regs->r3); - -- raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", -- regs->r0, regs->r1, regs->r2, regs->r3); -+ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", -+ regs->r4, regs->r5, regs->r6, regs->r7); - -- raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", -- regs->r4, regs->r5, regs->r6, regs->r7); -+ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", -+ regs->r8, regs->r9, regs->r10, regs->r11); - -- raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", -- regs->r8, regs->r9, regs->r10, regs->r11); -+ printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n", -+ regs->r12, regs->r13, regs->orig_r10, regs->acr); - -- raw_printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n", -- regs->r12, regs->r13, regs->orig_r10, regs->acr); -- -- raw_printk("sp: %08lx\n", regs); -+ printk(" sp: %08lx\n", (unsigned long)regs); - - SUPP_BANK_SEL(BANK_IM); - SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause); -@@ -52,18 +45,20 @@ - SUPP_BANK_SEL(BANK_DM); - SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause); - -- raw_printk(" Data MMU Cause: %08lx\n", d_mmu_cause); -- raw_printk("Instruction MMU Cause: %08lx\n", i_mmu_cause); -+ printk(" Data MMU Cause: %08lx\n", d_mmu_cause); -+ printk("Instruction MMU Cause: %08lx\n", i_mmu_cause); - -- raw_printk("Process %s (pid: %d, stackpage: %08lx)\n", -- current->comm, current->pid, (unsigned long) current); -+ printk("Process %s (pid: %d, stackpage=%08lx)\n", -+ current->comm, current->pid, (unsigned long)current); - -- /* Show additional info if in kernel-mode. */ -+ /* -+ * When in-kernel, we also print out the stack and code at the -+ * time of the fault.. -+ */ - if (!user_mode(regs)) { - int i; -- unsigned char c; - -- show_stack(NULL, (unsigned long *) usp); -+ show_stack(NULL, (unsigned long *)usp); - - /* - * If the previous stack-dump wasn't a kernel one, dump the -@@ -72,7 +67,7 @@ - if (usp != 0) - show_stack(NULL, NULL); - -- raw_printk("\nCode: "); -+ printk("\nCode: "); - - if (regs->erp < PAGE_OFFSET) - goto bad_value; -@@ -84,76 +79,65 @@ - * instruction decoding should be in sync at the interesting - * point, but small enough to fit on a row. The regs->erp - * location is pointed out in a ksymoops-friendly way by -- * wrapping the byte for that address in parenthesis. -+ * wrapping the byte for that address in parenthesises. - */ - for (i = -12; i < 12; i++) { -- if (__get_user(c, &((unsigned char *) regs->erp)[i])) { -+ unsigned char c; -+ -+ if (__get_user(c, &((unsigned char *)regs->erp)[i])) { - bad_value: -- raw_printk(" Bad IP value."); -+ printk(" Bad IP value."); - break; - } - - if (i == 0) -- raw_printk("(%02x) ", c); -+ printk("(%02x) ", c); - else -- raw_printk("%02x ", c); -+ printk("%02x ", c); - } -- -- raw_printk("\n"); -+ printk("\n"); - } - } - --/* -- * This gets called from entry.S when the watchdog has bitten. Show something -- * similiar to an Oops dump, and if the kernel if configured to be a nice doggy; -- * halt instead of reboot. -- */ - void --watchdog_bite_hook(struct pt_regs *regs) -+arch_enable_nmi(void) - { --#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY -- local_irq_disable(); -- stop_watchdog(); -- show_registers(regs); -- -- while (1) -- ; /* Do nothing. */ --#else -- show_registers(regs); --#endif -+ unsigned long flags; -+ -+ local_save_flags(flags); -+ flags |= (1 << 30); /* NMI M flag is at bit 30 */ -+ local_irq_restore(flags); - } - --/* This is normally the Oops function. */ --void --die_if_kernel(const char *str, struct pt_regs *regs, long err) -+extern void (*nmi_handler)(struct pt_regs*); -+void handle_nmi(struct pt_regs* regs) - { -- if (user_mode(regs)) -- return; -+ reg_intr_vect_r_nmi r; - --#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY -- /* -- * This printout might take too long and could trigger -- * the watchdog normally. If NICE_DOGGY is set, simply -- * stop the watchdog during the printout. -- */ -- stop_watchdog(); --#endif -- -- raw_printk("%s: %04lx\n", str, err & 0xffff); -+ if (nmi_handler) -+ nmi_handler(regs); - -- show_registers(regs); -- --#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY -- reset_watchdog(); --#endif -- -- do_exit(SIGSEGV); -+ /* Wait until nmi is no longer active. */ -+ do { -+ r = REG_RD(intr_vect, regi_irq, r_nmi); -+ } while (r.ext == regk_intr_vect_on); - } - --void arch_enable_nmi(void) -+#ifdef CONFIG_DEBUG_BUGVERBOSE -+void -+handle_BUG(struct pt_regs *regs) - { -- unsigned long flags; -- local_save_flags(flags); -- flags |= (1<<30); /* NMI M flag is at bit 30 */ -- local_irq_restore(flags); -+ struct bug_frame f; -+ unsigned char c; -+ unsigned long erp = regs->erp; -+ -+ if (__copy_from_user(&f, (const void __user *)(erp - 8), sizeof f)) -+ return; -+ if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC) -+ return; -+ if (__get_user(c, f.filename)) -+ f.filename = ""; -+ -+ printk("kernel BUG at %s:%d!\n", f.filename, f.line); - } -+#endif -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.c 1970-01-01 01:00:00.000000000 +0100 -@@ -1,96 +0,0 @@ --// $Id: vcs_hook.c,v 1.2 2003/08/12 12:01:06 starvik Exp $ --// --// Call simulator hook. This is the part running in the --// simulated program. --// -- --#include "vcs_hook.h" --#include --#include --#include -- --#define HOOK_TRIG_ADDR 0xb7000000 /* hook cvlog model reg address */ --#define HOOK_MEM_BASE_ADDR 0xa0000000 /* csp4 (shared mem) base addr */ -- --#define HOOK_DATA(offset) ((unsigned*) HOOK_MEM_BASE_ADDR)[offset] --#define VHOOK_DATA(offset) ((volatile unsigned*) HOOK_MEM_BASE_ADDR)[offset] --#define HOOK_TRIG(funcid) do { *((unsigned *) HOOK_TRIG_ADDR) = funcid; } while(0) --#define HOOK_DATA_BYTE(offset) ((unsigned char*) HOOK_MEM_BASE_ADDR)[offset] -- -- --// ------------------------------------------------------------------ hook_call --int hook_call( unsigned id, unsigned pcnt, ...) { -- va_list ap; -- unsigned i; -- unsigned ret; --#ifdef USING_SOS -- PREEMPT_OFF_SAVE(); --#endif -- -- // pass parameters -- HOOK_DATA(0) = id; -- -- /* Have to make hook_print_str a special case since we call with a -- parameter of byte type. Should perhaps be a separate -- hook_call. */ -- -- if (id == hook_print_str) { -- int i; -- char *str; -- -- HOOK_DATA(1) = pcnt; -- -- va_start(ap, pcnt); -- str = (char*)va_arg(ap,unsigned); -- -- for (i=0; i!=pcnt; i++) { -- HOOK_DATA_BYTE(8+i) = str[i]; -- } -- HOOK_DATA_BYTE(8+i) = 0; /* null byte */ -- } -- else { -- va_start(ap, pcnt); -- for( i = 1; i <= pcnt; i++ ) HOOK_DATA(i) = va_arg(ap,unsigned); -- va_end(ap); -- } -- -- // read from mem to make sure data has propagated to memory before trigging -- *((volatile unsigned*) HOOK_MEM_BASE_ADDR); -- -- // trigger hook -- HOOK_TRIG(id); -- -- // wait for call to finish -- while( VHOOK_DATA(0) > 0 ) {} -- -- // extract return value -- -- ret = VHOOK_DATA(1); -- --#ifdef USING_SOS -- PREEMPT_RESTORE(); --#endif -- return ret; --} -- --unsigned --hook_buf(unsigned i) --{ -- return (HOOK_DATA(i)); --} -- --void print_str( const char *str ) { -- int i; -- for (i=1; str[i]; i++); /* find null at end of string */ -- hook_call(hook_print_str, i, str); --} -- --// --------------------------------------------------------------- CPU_KICK_DOG --void CPU_KICK_DOG(void) { -- (void) hook_call( hook_kick_dog, 0 ); --} -- --// ------------------------------------------------------- CPU_WATCHDOG_TIMEOUT --void CPU_WATCHDOG_TIMEOUT( unsigned t ) { -- (void) hook_call( hook_dog_timeout, 1, t ); --} -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.h linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.h ---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.h 1970-01-01 01:00:00.000000000 +0100 -@@ -1,42 +0,0 @@ --// $Id: vcs_hook.h,v 1.1 2003/08/12 12:01:06 starvik Exp $ --// --// Call simulator hook functions -- --#ifndef HOOK_H --#define HOOK_H -- --int hook_call( unsigned id, unsigned pcnt, ...); -- --enum hook_ids { -- hook_debug_on = 1, -- hook_debug_off, -- hook_stop_sim_ok, -- hook_stop_sim_fail, -- hook_alloc_shared, -- hook_ptr_shared, -- hook_free_shared, -- hook_file2shared, -- hook_cmp_shared, -- hook_print_params, -- hook_sim_time, -- hook_stop_sim, -- hook_kick_dog, -- hook_dog_timeout, -- hook_rand, -- hook_srand, -- hook_rand_range, -- hook_print_str, -- hook_print_hex, -- hook_cmp_offset_shared, -- hook_fill_random_shared, -- hook_alloc_random_data, -- hook_calloc_random_data, -- hook_print_int, -- hook_print_uint, -- hook_fputc, -- hook_init_fd, -- hook_sbrk -- --}; -- --#endif -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/lib/Makefile ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/Makefile 2006-10-11 19:29:20.000000000 +0200 -@@ -2,5 +2,5 @@ - # Makefile for Etrax-specific library files.. - # - --lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o -+lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o delay.o - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksum.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksum.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksum.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksum.S 2005-08-15 15:53:12.000000000 +0200 -@@ -7,15 +7,15 @@ - - .globl csum_partial - csum_partial: -- -+ - ;; r10 - src - ;; r11 - length - ;; r12 - checksum - - ;; check for breakeven length between movem and normal word looping versions -- ;; we also do _NOT_ want to compute a checksum over more than the -+ ;; we also do _NOT_ want to compute a checksum over more than the - ;; actual length when length < 40 -- -+ - cmpu.w 80,$r11 - blo _word_loop - nop -@@ -24,17 +24,17 @@ - ;; this overhead is why we have a check above for breakeven length - ;; only r0 - r8 have to be saved, the other ones are clobber-able - ;; according to the ABI -- -+ - subq 9*4,$sp - subq 10*4,$r11 ; update length for the first loop - movem $r8,[$sp] -- -+ - ;; do a movem checksum - - _mloop: movem [$r10+],$r9 ; read 10 longwords - - ;; perform dword checksumming on the 10 longwords -- -+ - add.d $r0,$r12 - addc $r1,$r12 - addc $r2,$r12 -@@ -48,9 +48,8 @@ - - ;; fold the carry into the checksum, to avoid having to loop the carry - ;; back into the top -- -+ - addc 0,$r12 -- addc 0,$r12 ; do it again, since we might have generated a carry - - subq 10*4,$r11 - bge _mloop -@@ -68,34 +67,30 @@ - - ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below. - ;; r9 and r13 can be used as temporaries. -- -+ - moveq -1,$r9 ; put 0xffff in r9, faster than move.d 0xffff,r9 - lsrq 16,$r9 -- -+ - move.d $r12,$r13 - lsrq 16,$r13 ; r13 = checksum >> 16 - and.d $r9,$r12 ; checksum = checksum & 0xffff - add.d $r13,$r12 ; checksum += r13 -- move.d $r12,$r13 ; do the same again, maybe we got a carry last add -- lsrq 16,$r13 -- and.d $r9,$r12 -- add.d $r13,$r12 - - _no_fold: - cmpq 2,$r11 - blt _no_words - nop -- -+ - ;; checksum the rest of the words -- -+ - subq 2,$r11 -- -+ - _wloop: subq 2,$r11 - bge _wloop - addu.w [$r10+],$r12 -- -+ - addq 2,$r11 -- -+ - _no_words: - ;; see if we have one odd byte more - cmpq 1,$r11 -@@ -104,7 +99,7 @@ - ret - move.d $r12,$r10 - --_do_byte: -+_do_byte: - ;; copy and checksum the last byte - addu.b [$r10],$r12 - ret -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksumcopy.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksumcopy.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksumcopy.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksumcopy.S 2005-08-15 15:53:12.000000000 +0200 -@@ -3,23 +3,23 @@ - * Copyright (c) 1998, 2001, 2003 Axis Communications AB - * - * Authors: Bjorn Wesen -- * -+ * - * csum_partial_copy_nocheck(const char *src, char *dst, - * int len, unsigned int sum) - */ - - .globl csum_partial_copy_nocheck --csum_partial_copy_nocheck: -- -+csum_partial_copy_nocheck: -+ - ;; r10 - src - ;; r11 - dst - ;; r12 - length - ;; r13 - checksum - - ;; check for breakeven length between movem and normal word looping versions -- ;; we also do _NOT_ want to compute a checksum over more than the -+ ;; we also do _NOT_ want to compute a checksum over more than the - ;; actual length when length < 40 -- -+ - cmpu.w 80,$r12 - blo _word_loop - nop -@@ -28,19 +28,19 @@ - ;; this overhead is why we have a check above for breakeven length - ;; only r0 - r8 have to be saved, the other ones are clobber-able - ;; according to the ABI -- -+ - subq 9*4,$sp - subq 10*4,$r12 ; update length for the first loop - movem $r8,[$sp] -- -+ - ;; do a movem copy and checksum -- -+ - 1: ;; A failing userspace access (the read) will have this as PC. - _mloop: movem [$r10+],$r9 ; read 10 longwords - movem $r9,[$r11+] ; write 10 longwords - - ;; perform dword checksumming on the 10 longwords -- -+ - add.d $r0,$r13 - addc $r1,$r13 - addc $r2,$r13 -@@ -54,9 +54,8 @@ - - ;; fold the carry into the checksum, to avoid having to loop the carry - ;; back into the top -- -+ - addc 0,$r13 -- addc 0,$r13 ; do it again, since we might have generated a carry - - subq 10*4,$r12 - bge _mloop -@@ -74,34 +73,30 @@ - - ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below - ;; r9 can be used as temporary. -- -+ - move.d $r13,$r9 - lsrq 16,$r9 ; r0 = checksum >> 16 - and.d 0xffff,$r13 ; checksum = checksum & 0xffff - add.d $r9,$r13 ; checksum += r0 -- move.d $r13,$r9 ; do the same again, maybe we got a carry last add -- lsrq 16,$r9 -- and.d 0xffff,$r13 -- add.d $r9,$r13 -- -+ - _no_fold: - cmpq 2,$r12 - blt _no_words - nop -- -+ - ;; copy and checksum the rest of the words -- -+ - subq 2,$r12 -- -+ - 2: ;; A failing userspace access for the read below will have this as PC. - _wloop: move.w [$r10+],$r9 - addu.w $r9,$r13 - subq 2,$r12 - bge _wloop - move.w $r9,[$r11+] -- -+ - addq 2,$r12 -- -+ - _no_words: - ;; see if we have one odd byte more - cmpq 1,$r12 -@@ -110,7 +105,7 @@ - ret - move.d $r13,$r10 - --_do_byte: -+_do_byte: - ;; copy and checksum the last byte - 3: ;; A failing userspace access for the read below will have this as PC. - move.b [$r10],$r9 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/delay.c linux-2.6.19.2.dev/arch/cris/arch-v32/lib/delay.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/delay.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/delay.c 2006-10-16 01:08:41.000000000 +0200 -@@ -0,0 +1,28 @@ -+/* -+ * Precise Delay Loops for ETRAX FS -+ * -+ * Copyright (C) 2006 Axis Communications AB. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * On ETRAX FS, we can check the free-running read-only 100MHz timer -+ * getting 32-bit 10ns precision, theoretically good for 42.94967295 -+ * seconds. Unsigned arithmetic and careful expression handles -+ * wrapping. -+ */ -+ -+void cris_delay10ns(u32 n10ns) -+{ -+ u32 t0 = REG_RD(timer, regi_timer, r_time); -+ while (REG_RD(timer, regi_timer, r_time) - t0 < n10ns) -+ ; -+} -+EXPORT_SYMBOL(cris_delay10ns); -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/dram_init.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/dram_init.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/dram_init.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/dram_init.S 2006-11-28 11:06:19.000000000 +0100 -@@ -1,14 +1,14 @@ --/* $Id: dram_init.S,v 1.4 2005/04/24 18:48:32 starvik Exp $ -- * -+/* $Id: dram_init.S,v 1.9 2006/11/28 10:06:19 ricardw Exp $ -+ * - * DRAM/SDRAM initialization - alter with care - * This file is intended to be included from other assembler files - * -- * Note: This file may not modify r8 or r9 because they are used to -- * carry information from the decompresser to the kernel -+ * Note: This file may not modify r8 .. r12 because they are used to -+ * carry information from the decompressor to the kernel - * - * Copyright (C) 2000-2003 Axis Communications AB - * -- * Authors: Mikael Starvik (starvik@axis.com) -+ * Authors: Mikael Starvik (starvik@axis.com) - */ - - /* Just to be certain the config file is included, we include it here -@@ -18,13 +18,13 @@ - - #include - #include -- -- ;; WARNING! The registers r8 and r9 are used as parameters carrying -- ;; information from the decompressor (if the kernel was compressed). -+ -+ ;; WARNING! The registers r8 .. r12 are used as parameters carrying -+ ;; information from the decompressor (if the kernel was compressed). - ;; They should not be used in the code below. - - ; Refer to BIF MDS for a description of SDRAM initialization -- -+ - ; Bank configuration - move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0), $r0 - move.d CONFIG_ETRAX_SDRAM_GRP0_CONFIG, $r1 -@@ -33,7 +33,7 @@ - move.d CONFIG_ETRAX_SDRAM_GRP1_CONFIG, $r1 - move.d $r1, [$r0] - -- ; Calculate value of mrs_data -+ ; Calculate value of mrs_data - ; CAS latency = 2 && bus_width = 32 => 0x40 - ; CAS latency = 3 && bus_width = 32 => 0x60 - ; CAS latency = 2 && bus_width = 16 => 0x20 -@@ -43,7 +43,7 @@ - move.d CONFIG_ETRAX_SDRAM_COMMAND, $r2 - bne _set_timing - nop -- -+ - move.d 0x40, $r4 ; Assume 32 bits and CAS latency = 2 - move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 - and.d 0x07, $r1 ; Get CAS latency -@@ -51,7 +51,7 @@ - beq _bw_check - nop - move.d 0x60, $r4 -- -+ - _bw_check: - ; Assume that group 0 width is equal to group 1. This assumption - ; is wrong for a group 1 only hardware (such as the grand old -@@ -67,23 +67,27 @@ - move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 - and.d ~(3 << reg_bif_core_rw_sdram_timing___ref___lsb), $r1 - move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0 -- move.d $r1, [$r0] -+ move.d $r1, [$r0] -+ -+ ; Wait 200us -+ move.d 10000, $r2 -+1: bne 1b -+ subq 1, $r2 - - ; Issue NOP command - move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd), $r5 - moveq regk_bif_core_nop, $r1 - move.d $r1, [$r5] -- -+ - ; Wait 200us - move.d 10000, $r2 - 1: bne 1b - subq 1, $r2 -- -+ - ; Issue initialization command sequence -- move.d _sdram_commands_start, $r2 -- and.d 0x000fffff, $r2 ; Make sure commands are read from flash -- move.d _sdram_commands_end, $r3 -- and.d 0x000fffff, $r3 -+ lapc.d _sdram_commands_start, $r2 ; position-independent -+ lapc.d _sdram_commands_end, $r3 ; position-independent -+ - 1: clear.d $r6 - move.b [$r2+], $r6 ; Load command - or.d $r4, $r6 ; Add calculated mrs -@@ -100,7 +104,7 @@ - move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 - move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0 - move.d $r1, [$r0] -- -+ - ; Initialization finished - ba _sdram_commands_end - nop -@@ -116,4 +120,4 @@ - .byte regk_bif_core_ref ; refresh - .byte regk_bif_core_ref ; refresh - .byte regk_bif_core_mrs ; mrs --_sdram_commands_end: -+_sdram_commands_end: -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/hw_settings.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/hw_settings.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/hw_settings.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/hw_settings.S 2006-10-13 14:43:15.000000000 +0200 -@@ -1,25 +1,25 @@ - /* -- * $Id: hw_settings.S,v 1.3 2005/04/24 18:36:57 starvik Exp $ -- * -+ * $Id: hw_settings.S,v 1.5 2006/10/13 12:43:15 starvik Exp $ -+ * - * This table is used by some tools to extract hardware parameters. - * The table should be included in the kernel and the decompressor. - * Don't forget to update the tools if you change this table. - * - * Copyright (C) 2001 Axis Communications AB - * -- * Authors: Mikael Starvik (starvik@axis.com) -+ * Authors: Mikael Starvik (starvik@axis.com) - */ - - #include - #include - #include -- -+ - .ascii "HW_PARAM_MAGIC" ; Magic number - .dword 0xc0004000 ; Kernel start address - - ; Debug port - #ifdef CONFIG_ETRAX_DEBUG_PORT0 -- .dword 0 -+ .dword 0 - #elif defined(CONFIG_ETRAX_DEBUG_PORT1) - .dword 1 - #elif defined(CONFIG_ETRAX_DEBUG_PORT2) -@@ -28,9 +28,9 @@ - .dword 3 - #else - .dword 4 ; No debug --#endif -+#endif - -- ; Register values -+ ; Register values - .dword REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg) - .dword CONFIG_ETRAX_MEM_GRP1_CONFIG - .dword REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg) -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/memset.c linux-2.6.19.2.dev/arch/cris/arch-v32/lib/memset.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/memset.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/memset.c 2003-07-02 05:00:14.000000000 +0200 -@@ -66,7 +66,7 @@ - - { - register char *dst __asm__ ("r13") = pdst; -- -+ - /* This is NONPORTABLE, but since this whole routine is */ - /* grossly nonportable that doesn't matter. */ - -@@ -156,7 +156,7 @@ - } - - /* Either we directly starts copying, using dword copying -- in a loop, or we copy as much as possible with 'movem' -+ in a loop, or we copy as much as possible with 'movem' - and then the last block (<44 bytes) is copied here. - This will work since 'movem' will have updated src,dst,n. */ - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/nand_init.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/nand_init.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/nand_init.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/nand_init.S 2007-01-31 16:52:19.000000000 +0100 -@@ -9,14 +9,16 @@ - ## - ## Some notes about the bug/feature for future reference: - ## The bootrom copies the first 127 KB from NAND flash to internal --## memory. The problem is that it does a bytewise copy. NAND flashes --## does autoincrement on the address so for a 16-bite device each --## read/write increases the address by two. So the copy loop in the -+## memory. The problem is that it does a bytewise copy, copying -+## a single byte from the lowest byte of the bus for each address. -+## NAND flashes autoincrement on the address so for a 16 bit device -+## each read/write increases the address by two. So the copy loop in the - ## bootrom will discard every second byte. This is solved by inserting --## zeroes in every second byte in the first erase block. -+## zeroes in every second byte in the first erase block, in order -+## to get contiguous code. - ## - ## The bootrom also incorrectly assumes that it can read the flash --## linear with only one read command but the flash will actually -+## linearly with only one read command but the flash will actually - ## switch between normal area and spare area if you do that so we - ## can't trust more than the first 256 bytes. - ## -@@ -29,14 +31,16 @@ - #include - - ;; There are 8-bit NAND flashes and 16-bit NAND flashes. --;; We need to treat them slightly different. --#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 --#define PAGE_SIZE 256 -+;; We need to treat them slightly differently. -+#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2 -+#define PAGE_SIZE_ADDRESSES 256 - #else --#error 2 --#define PAGE_SIZE 512 -+#define PAGE_SIZE_ADDRESSES 512 - #endif -+ -+;; Block size for erase - #define ERASE_BLOCK 16384 -+#define PAGE_SIZE_BYTES 512 - - ;; GPIO pins connected to NAND flash - #define CE 4 -@@ -49,6 +53,7 @@ - #define NAND_WR_ADDR 0x94000000 - - #define READ_CMD 0x00 -+#define RESET_CMD 0xFF - - ;; Readability macros - #define CSP_MASK \ -@@ -58,6 +63,10 @@ - REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \ - REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr) - -+;; Normally we initialize GPIO and bus interfaces. -+;; This is strictly not necessary; boot ROM does this for us. -+#define INTERFACE_SETUP (1) -+ - ;;---------------------------------------------------------------------------- - ;; Macros to set/clear GPIO bits - -@@ -71,16 +80,41 @@ - move.d $r9, [$r2] - .endm - -+.macro GPIO_SYNC -+;; Originally, we read back data written to nand flash in order -+;; to flush the pipeline. It turned out however, that the real -+;; culprit was a lack of wait states. -+;; This macro remains in the code however in case this conclusion -+;; is wrong too. -+;; -+;; move.d [$r2], $r9 ; read back to flush pipeline -+.endm -+ - ;;---------------------------------------------------------------------------- -+;; Read value from bus to temporary register to sync with previous write -+;; This generates no signal to the NAND flash, since only chip select lines are -+;; pulled out to the chip, and read is not gated with chip select for the write -+;; area. - --nand_boot: -- ;; Check if nand boot was selected -- move.d REG_ADDR(config, regi_config, r_bootsel), $r0 -- move.d [$r0], $r0 -- and.d REG_MASK(config, r_bootsel, boot_mode), $r0 -- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 -- bne normal_boot ; No NAND boot -- nop -+.macro BUS_SYNC r -+ move.b [$r1], \r -+.endm -+ -+;;---------------------------------------------------------------------------- -+;; Delay macro -+;; x = delay = 10*x + 20 ns, e.g. DELAY 25 => 270ns delay, max 63 (650 ns) -+;;(@200Mc) -+;; r is temp reg used -+;; Macro currently not used, save for a rainy day. -+ -+.macro DELAY x, r -+ clear.d \r -+ addq (\x),\r ; addq zero-extends its argument -+7: bne 7b -+ subq 1, \r -+.endm -+ -+;;---------------------------------------------------------------------------- - - copy_nand_to_ram: - ;; copy_nand_to_ram -@@ -88,7 +122,6 @@ - ;; r10 - destination - ;; r11 - source offset - ;; r12 - size -- ;; r13 - Address to jump to after completion - ;; Note : r10-r12 are clobbered on return - ;; Registers used: - ;; r0 - NAND_RD_ADDR -@@ -96,83 +129,99 @@ - ;; r2 - reg_gio_rw_pa_dout - ;; r3 - reg_gio_r_pa_din - ;; r4 - tmp -- ;; r5 - byte counter within a page -- ;; r6 - reg_pinmux_rw_pa -- ;; r7 - reg_gio_rw_pa_oe -- ;; r8 - reg_bif_core_rw_grp3_cfg -+ ;; r5 - byte counter within a page / tmp2 -+ ;; r6 - r_bootsel masked w/ 0x18 -+ ;; r7 - n/u -+ ;; r8 - n/u - ;; r9 - reg_gio_rw_pa_dout shadow -- move.d 0x90000000, $r0 -- move.d 0x94000000, $r1 -+ move.d NAND_RD_ADDR, $r0 -+ move.d NAND_WR_ADDR, $r1 - move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2 - move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3 -- move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6 -- move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7 -- move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8 - --#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 -+#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2 - lsrq 1, $r11 - #endif -+ -+#if INTERFACE_SETUP -+ ;; Set up pinmux -+ move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r5 -+ move.d [$r5], $r4 -+ or.b 0xf0, $r4 ; bits 4,5,6,7 -+ move.d $r4, [$r5] -+ - ;; Set up GPIO -- move.d [$r2], $r9 -- move.d [$r7], $r4 -+ move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r5 -+ move.d [$r5], $r4 - or.b (1<3, 08=>4, 18=>5 cycles) - - 1: ;; Copy one page - CLR CE - SET CLE -+ GPIO_SYNC - moveq READ_CMD, $r4 - move.b $r4, [$r1] -- moveq 20, $r4 --2: bne 2b -- subq 1, $r4 -+ BUS_SYNC $r4 - CLR CLE - SET ALE -- clear.w [$r1] ; Column address = 0 -- move.d $r11, $r4 -+ GPIO_SYNC -+ clear.b [$r1] ; Column address = 0 -+ move.d $r11, $r4 ; Address -+ lsrq 9, $r4 ; Row address is A9 and up -+ move.b $r4, [$r1] ; Row address byte #0 - lsrq 8, $r4 -- move.b $r4, [$r1] ; Row address -+ cmpq 0x08, $r6 ; 8 => Z, 0 => C, 18h => NZ,NC -+ bcs 4f ; C (3 cycles) => jump -+ move.b $r4, [$r1] ; Row address byte #1 (DELAY SLOT) (no flagset) -+ beq 3f ; Z (4 cycles) => jump -+ lsrq 8, $r4 ; (DELAY SLOT) -+ move.b $r4, [$r1] ; Row address byte #2 (5 cyc only) - lsrq 8, $r4 -- move.b $r4, [$r1] ; Row adddress -- moveq 20, $r4 --2: bne 2b -- subq 1, $r4 -+3: -+ move.b $r4, [$r1] ; Row address byte #3 (5 cyc) or #2 (4 cyc) -+4: -+ BUS_SYNC $r4 - CLR ALE -+ GPIO_SYNC -+ - 2: move.d [$r3], $r4 - and.d 1 << BY, $r4 - beq 2b -- movu.w PAGE_SIZE, $r5 -+ nop -+ movu.w PAGE_SIZE_ADDRESSES, $r5 - 2: ; Copy one byte/word --#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 -+#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2 - move.w [$r0], $r4 - #else - move.b [$r0], $r4 - #endif - subq 1, $r5 - bne 2b --#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 -+#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2 - move.w $r4, [$r10+] -- subu.w PAGE_SIZE*2, $r12 - #else - move.b $r4, [$r10+] -- subu.w PAGE_SIZE, $r12 - #endif -- bpl 1b -- addu.w PAGE_SIZE, $r11 -+ subu.w PAGE_SIZE_BYTES, $r12 -+ bhi 1b -+ addu.w PAGE_SIZE_ADDRESSES, $r11 - -- ;; End of copy -- jump $r13 -- nop -+ SET CE - -- ;; This will warn if the code above is too large. If you consider -- ;; to remove this you don't understand the bug/feature. -- .org 256 -- .org ERASE_BLOCK -- --normal_boot: -+ ;; End of copy -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/spinlock.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/spinlock.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/spinlock.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/spinlock.S 2006-05-24 11:38:43.000000000 +0200 -@@ -1,22 +1,22 @@ - ;; Core of the spinlock implementation - ;; --;; Copyright (C) 2004 Axis Communications AB. -+;; Copyright (C) 2004 Axis Communications AB. - ;; --;; Author: Mikael Starvik -- -+;; Author: Mikael Starvik - -+ - .global cris_spin_lock - .global cris_spin_trylock - - .text -- -+ - cris_spin_lock: - clearf p --1: test.d [$r10] -+1: test.b [$r10] - beq 1b - clearf p - ax -- clear.d [$r10] -+ clear.b [$r10] - bcs 1b - clearf p - ret -@@ -24,10 +24,10 @@ - - cris_spin_trylock: - clearf p --1: move.d [$r10], $r11 -+1: move.b [$r10], $r11 - ax -- clear.d [$r10] -+ clear.b [$r10] - bcs 1b - clearf p - ret -- move.d $r11,$r10 -+ movu.b $r11,$r10 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/string.c linux-2.6.19.2.dev/arch/cris/arch-v32/lib/string.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/string.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/string.c 2003-07-02 05:00:14.000000000 +0200 -@@ -48,8 +48,8 @@ - register char *dst __asm__ ("r13") = pdst; - register const char *src __asm__ ("r11") = psrc; - register int n __asm__ ("r12") = pn; -- -- -+ -+ - /* When src is aligned but not dst, this makes a few extra needless - cycles. I believe it would take as many to check that the - re-alignment was unnecessary. */ -@@ -117,13 +117,13 @@ - ;; Restore registers from stack \n\ - movem [$sp+],$r10" - -- /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) -+ /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) - /* Inputs */ : "0" (dst), "1" (src), "2" (n)); -- -+ - } - - /* Either we directly starts copying, using dword copying -- in a loop, or we copy as much as possible with 'movem' -+ in a loop, or we copy as much as possible with 'movem' - and then the last block (<44 bytes) is copied here. - This will work since 'movem' will have updated src,dst,n. */ - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/init.c linux-2.6.19.2.dev/arch/cris/arch-v32/mm/init.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/mm/init.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/init.c 2006-10-13 14:43:14.000000000 +0200 -@@ -34,12 +34,12 @@ - unsigned long mmu_kbase_hi; - unsigned long mmu_kbase_lo; - unsigned short mmu_page_id; -- -- /* -+ -+ /* - * Make sure the current pgd table points to something sane, even if it - * is most probably not used until the next switch_mm. - */ -- per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd; -+ per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd; - - #ifdef CONFIG_SMP - { -@@ -65,7 +65,7 @@ - REG_STATE(mmu, rw_mm_cfg, seg_d, page) | - REG_STATE(mmu, rw_mm_cfg, seg_c, linear) | - REG_STATE(mmu, rw_mm_cfg, seg_b, linear) | --#ifndef CONFIG_ETRAXFS_SIM -+#ifndef CONFIG_ETRAXFS_SIM - REG_STATE(mmu, rw_mm_cfg, seg_a, page) | - #else - REG_STATE(mmu, rw_mm_cfg, seg_a, linear) | -@@ -115,7 +115,7 @@ - SUPP_REG_WR(RW_MM_KBASE_HI, mmu_kbase_hi); - SUPP_REG_WR(RW_MM_KBASE_LO, mmu_kbase_lo); - SUPP_REG_WR(RW_MM_TLB_HI, mmu_page_id); -- -+ - /* Update the data MMU. */ - SUPP_BANK_SEL(BANK_DM); - SUPP_REG_WR(RW_MM_CFG, mmu_config); -@@ -125,7 +125,7 @@ - - SPEC_REG_WR(SPEC_REG_PID, 0); - -- /* -+ /* - * The MMU has been enabled ever since head.S but just to make it - * totally obvious enable it here as well. - */ -@@ -133,7 +133,7 @@ - SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */ - } - --void __init -+void __init - paging_init(void) - { - int i; -@@ -160,13 +160,13 @@ - for (i = 1; i < MAX_NR_ZONES; i++) - zones_size[i] = 0; - -- /* -+ /* - * Use free_area_init_node instead of free_area_init, because it is -- * designed for systems where the DRAM starts at an address -+ * designed for systems where the DRAM starts at an address - * substantially higher than 0, like us (we start at PAGE_OFFSET). This - * saves space in the mem_map page array. - */ - free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0); -- -+ - mem_map = contig_page_data.node_mem_map; - } -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/intmem.c linux-2.6.19.2.dev/arch/cris/arch-v32/mm/intmem.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/mm/intmem.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/intmem.c 2006-01-02 12:27:04.000000000 +0100 -@@ -27,7 +27,7 @@ - { - static int initiated = 0; - if (!initiated) { -- struct intmem_allocation* alloc = -+ struct intmem_allocation* alloc = - (struct intmem_allocation*)kmalloc(sizeof *alloc, GFP_KERNEL); - INIT_LIST_HEAD(&intmem_allocations); - intmem_virtual = ioremap(MEM_INTMEM_START, MEM_INTMEM_SIZE); -@@ -44,7 +44,7 @@ - struct intmem_allocation* allocation; - struct intmem_allocation* tmp; - void* ret = NULL; -- -+ - preempt_disable(); - crisv32_intmem_init(); - -@@ -55,7 +55,7 @@ - if (allocation->status == STATUS_FREE && - allocation->size >= size + alignment) { - if (allocation->size > size + alignment) { -- struct intmem_allocation* alloc = -+ struct intmem_allocation* alloc = - (struct intmem_allocation*) - kmalloc(sizeof *alloc, GFP_ATOMIC); - alloc->status = STATUS_FREE; -@@ -73,13 +73,13 @@ - allocation->offset += alignment; - list_add_tail(&tmp->entry, &allocation->entry); - } -- } -+ } - allocation->status = STATUS_ALLOCATED; - allocation->size = size; - ret = (void*)((int)intmem_virtual + allocation->offset); - } - } -- preempt_enable(); -+ preempt_enable(); - return ret; - } - -@@ -96,22 +96,22 @@ - - list_for_each_entry_safe(allocation, tmp, &intmem_allocations, entry) { - if (allocation->offset == (int)(addr - intmem_virtual)) { -- struct intmem_allocation* prev = -- list_entry(allocation->entry.prev, -+ struct intmem_allocation* prev = -+ list_entry(allocation->entry.prev, - struct intmem_allocation, entry); -- struct intmem_allocation* next = -- list_entry(allocation->entry.next, -+ struct intmem_allocation* next = -+ list_entry(allocation->entry.next, - struct intmem_allocation, entry); - - allocation->status = STATUS_FREE; - /* Join with prev and/or next if also free */ -- if (prev->status == STATUS_FREE) { -+ if ((prev != &intmem_allocations) && (prev->status == STATUS_FREE)) { - prev->size += allocation->size; - list_del(&allocation->entry); - kfree(allocation); - allocation = prev; - } -- if (next->status == STATUS_FREE) { -+ if ((next != &intmem_allocations) && (next->status == STATUS_FREE)) { - allocation->size += next->size; - list_del(&next->entry); - kfree(next); -@@ -125,13 +125,13 @@ - - void* crisv32_intmem_phys_to_virt(unsigned long addr) - { -- return (void*)(addr - MEM_INTMEM_START+ -+ return (void*)(addr - MEM_INTMEM_START+ - (unsigned long)intmem_virtual); - } - - unsigned long crisv32_intmem_virt_to_phys(void* addr) - { -- return (unsigned long)((unsigned long )addr - -+ return (unsigned long)((unsigned long )addr - - (unsigned long)intmem_virtual + MEM_INTMEM_START); - } - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/mmu.S linux-2.6.19.2.dev/arch/cris/arch-v32/mm/mmu.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/mm/mmu.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/mmu.S 2006-08-04 10:10:20.000000000 +0200 -@@ -1,3 +1,5 @@ -+; WARNING : The refill handler has been modified, see below !!! -+ - /* - * Copyright (C) 2003 Axis Communications AB - * -@@ -9,7 +11,7 @@ - - #include - #include -- -+ - ; Save all register. Must save in same order as struct pt_regs. - .macro SAVE_ALL - subq 12, $sp -@@ -29,11 +31,11 @@ - subq 14*4, $sp - movem $r13, [$sp] - subq 4, $sp -- move.d $r10, [$sp] -+ move.d $r10, [$sp] - .endm - - ; Bus fault handler. Extracts relevant information and calls mm subsystem --; to handle the fault. -+; to handle the fault. - .macro MMU_BUS_FAULT_HANDLER handler, mmu, we, ex - .globl \handler - \handler: -@@ -45,7 +47,7 @@ - orq \ex << 1, $r13 ; execute? - move $s3, $r10 ; rw_mm_cause - and.d ~8191, $r10 ; Get faulting page start address -- -+ - jsr do_page_fault - nop - ba ret_from_intr -@@ -59,15 +61,28 @@ - ; The code below handles case 1 and calls the mm subsystem for case 2 and 3. - ; Do not touch this code without very good reasons and extensive testing. - ; Note that the code is optimized to minimize stalls (makes the code harder --; to read). -+; to read). -+; -+; WARNING !!! -+; Modified by Mikael Asker 060725: added a workaround for strange TLB -+; behavior. If the same PTE is present in more than one set, the TLB -+; doesn't recognize it and we get stuck in a loop of refill exceptions. -+; The workaround detects such loops and exits them by flushing -+; the TLB contents. The problem and workaround were verified -+; in VCS by Mikael Starvik. - ; - ; Each page is 8 KB. Each PMD holds 8192/4 PTEs (each PTE is 4 bytes) so each --; PMD holds 16 MB of virtual memory. -+; PMD holds 16 MB of virtual memory. - ; Bits 0-12 : Offset within a page - ; Bits 13-23 : PTE offset within a PMD - ; Bits 24-31 : PMD offset within the PGD -- -+ - .macro MMU_REFILL_HANDLER handler, mmu -+ .data -+1: .dword 0 ; refill_count -+ ; == 0 <=> last_refill_cause is invalid -+2: .dword 0 ; last_refill_cause -+ .text - .globl \handler - \handler: - subq 4, $sp -@@ -76,40 +91,88 @@ - subq 4, $sp - move \mmu, $srs ; Select MMU support register bank - move.d $acr, [$sp] -- subq 4, $sp -- move.d $r0, [$sp] --#ifdef CONFIG_SMP -+ subq 12, $sp -+ move.d 1b, $acr ; Point to refill_count -+ movem $r2, [$sp] -+ -+ test.d [$acr] ; refill_count == 0 ? -+ beq 5f ; yes, last_refill_cause is invalid -+ move.d $acr, $r1 -+ -+ ; last_refill_cause is valid, investigate cause -+ addq 4, $r1 ; Point to last_refill_cause -+ move $s3, $r0 ; Get rw_mm_cause -+ move.d [$r1], $r2 ; Get last_refill_cause -+ cmp.d $r0, $r2 ; rw_mm_cause == last_refill_cause ? -+ beq 6f ; yes, increment count -+ moveq 1, $r2 -+ -+ ; rw_mm_cause != last_refill_cause -+ move.d $r2, [$acr] ; refill_count = 1 -+ move.d $r0, [$r1] ; last_refill_cause = rw_mm_cause -+ -+3: ; Probably not in a loop, continue normal processing -+#ifdef CONFIG_SMP - move $s7, $acr ; PGD - #else - move.d per_cpu__current_pgd, $acr ; PGD - #endif - ; Look up PMD in PGD -- move $s3, $r0 ; rw_mm_cause - lsrq 24, $r0 ; Get PMD index into PGD (bit 24-31) - move.d [$acr], $acr ; PGD for the current process - addi $r0.d, $acr, $acr - move $s3, $r0 ; rw_mm_cause - move.d [$acr], $acr ; Get PMD -- beq 1f -+ beq 8f - ; Look up PTE in PMD - lsrq PAGE_SHIFT, $r0 - and.w PAGE_MASK, $acr ; Remove PMD flags - and.d 0x7ff, $r0 ; Get PTE index into PMD (bit 13-23) - addi $r0.d, $acr, $acr - move.d [$acr], $acr ; Get PTE -- beq 2f -- move.d [$sp+], $r0 ; Pop r0 in delayslot -+ beq 9f -+ movem [$sp], $r2 ; Restore r0-r2 in delay slot -+ addq 12, $sp - ; Store in TLB - move $acr, $s5 -- ; Return -+4: ; Return - move.d [$sp+], $acr - move [$sp], $srs - addq 4, $sp - rete - rfe --1: ; PMD missing, let the mm subsystem fix it up. -- move.d [$sp+], $r0 ; Pop r0 --2: ; PTE missing, let the mm subsystem fix it up. -+ -+5: ; last_refill_cause is invalid -+ moveq 1, $r2 -+ addq 4, $r1 ; Point to last_refill_cause -+ move.d $r2, [$acr] ; refill_count = 1 -+ move $s3, $r0 ; Get rw_mm_cause -+ ba 3b ; Continue normal processing -+ move.d $r0,[$r1] ; last_refill_cause = rw_mm_cause -+ -+6: ; rw_mm_cause == last_refill_cause -+ move.d [$acr], $r2 ; Get refill_count -+ cmpq 4, $r2 ; refill_count > 4 ? -+ bhi 7f ; yes -+ addq 1, $r2 ; refill_count++ -+ ba 3b ; Continue normal processing -+ move.d $r2, [$acr] -+ -+7: ; refill_count > 4, error -+ subq 4, $sp -+ move $srp, [$sp] -+ jsr __flush_tlb_all -+ move.d $acr, $r0 ; Save pointer to refill_count -+ move [$sp+], $srp -+ clear.d [$r0] ; refill_count = 0 -+ movem [$sp], $r2 -+ ba 4b ; Return -+ addq 12, $sp -+ -+8: ; PMD missing, let the mm subsystem fix it up. -+ movem [$sp], $r2 ; Restore r0-r2 -+9: ; PTE missing, let the mm subsystem fix it up. -+ addq 12, $sp - move.d [$sp+], $acr - move [$sp], $srs - addq 4, $sp -@@ -128,7 +191,7 @@ - ba ret_from_intr - nop - .endm -- -+ - ; This is the MMU bus fault handlers. - - MMU_REFILL_HANDLER i_mmu_refill, 1 -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/tlb.c linux-2.6.19.2.dev/arch/cris/arch-v32/mm/tlb.c ---- linux-2.6.19.2.old/arch/cris/arch-v32/mm/tlb.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/tlb.c 2006-08-07 12:06:44.000000000 +0200 -@@ -2,7 +2,7 @@ - * Low level TLB handling. - * - * Copyright (C) 2000-2003, Axis Communications AB. -- * -+ * - * Authors: Bjorn Wesen - * Tobias Anderberg , CRISv32 port. - */ -@@ -79,7 +79,7 @@ - void - __flush_tlb_mm(struct mm_struct *mm) - { -- int i; -+ int i; - int mmu; - unsigned long flags; - unsigned long page_id; -@@ -90,7 +90,7 @@ - - if (page_id == NO_CONTEXT) - return; -- -+ - /* Mark the TLB entries that match the page_id as invalid. */ - local_save_flags(flags); - local_irq_disable(); -@@ -99,15 +99,15 @@ - SUPP_BANK_SEL(mmu); - for (i = 0; i < NUM_TLB_ENTRIES; i++) { - UPDATE_TLB_SEL_IDX(i); -- -+ - /* Get the page_id */ - SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi); - - /* Check if the page_id match. */ - if ((tlb_hi & 0xff) == page_id) { - mmu_tlb_hi = (REG_FIELD(mmu, rw_mm_tlb_hi, pid, -- INVALID_PAGEID) -- | REG_FIELD(mmu, rw_mm_tlb_hi, vpn, -+ INVALID_PAGEID) -+ | REG_FIELD(mmu, rw_mm_tlb_hi, vpn, - i & 0xf)); - - UPDATE_TLB_HILO(mmu_tlb_hi, 0); -@@ -135,7 +135,7 @@ - return; - - addr &= PAGE_MASK; -- -+ - /* - * Invalidate those TLB entries that match both the mm context and the - * requested virtual address. -@@ -150,11 +150,11 @@ - SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi); - - /* Check if page_id and address matches */ -- if (((tlb_hi & 0xff) == page_id) && -+ if (((tlb_hi & 0xff) == page_id) && - ((tlb_hi & PAGE_MASK) == addr)) { - mmu_tlb_hi = REG_FIELD(mmu, rw_mm_tlb_hi, pid, - INVALID_PAGEID) | addr; -- -+ - UPDATE_TLB_HILO(mmu_tlb_hi, 0); - } - } -@@ -178,33 +178,35 @@ - static DEFINE_SPINLOCK(mmu_context_lock); - - /* Called in schedule() just before actually doing the switch_to. */ --void -+void - switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) --{ -- int cpu = smp_processor_id(); -- -- /* Make sure there is a MMU context. */ -- spin_lock(&mmu_context_lock); -- get_mmu_context(next); -- cpu_set(cpu, next->cpu_vm_mask); -- spin_unlock(&mmu_context_lock); -- -- /* -- * Remember the pgd for the fault handlers. Keep a seperate copy of it -- * because current and active_mm might be invalid at points where -- * there's still a need to derefer the pgd. -- */ -- per_cpu(current_pgd, cpu) = next->pgd; -- -- /* Switch context in the MMU. */ -- if (tsk && task_thread_info(tsk)) -- { -- SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | task_thread_info(tsk)->tls); -- } -- else -- { -- SPEC_REG_WR(SPEC_REG_PID, next->context.page_id); -- } -+{ -+ if (prev != next) { -+ int cpu = smp_processor_id(); -+ -+ /* Make sure there is a MMU context. */ -+ spin_lock(&mmu_context_lock); -+ get_mmu_context(next); -+ cpu_set(cpu, next->cpu_vm_mask); -+ spin_unlock(&mmu_context_lock); -+ -+ /* -+ * Remember the pgd for the fault handlers. Keep a seperate copy of it -+ * because current and active_mm might be invalid at points where -+ * there's still a need to derefer the pgd. -+ */ -+ per_cpu(current_pgd, cpu) = next->pgd; -+ -+ /* Switch context in the MMU. */ -+ if (tsk && task_thread_info(tsk)) -+ { -+ SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | task_thread_info(tsk)->tls); -+ } -+ else -+ { -+ SPEC_REG_WR(SPEC_REG_PID, next->context.page_id); -+ } -+ } - } - -diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/vmlinux.lds.S linux-2.6.19.2.dev/arch/cris/arch-v32/vmlinux.lds.S ---- linux-2.6.19.2.old/arch/cris/arch-v32/vmlinux.lds.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/arch-v32/vmlinux.lds.S 2006-10-13 14:43:11.000000000 +0200 -@@ -5,11 +5,11 @@ - * script. It is for example quite vital that all generated sections - * that are used are actually named here, otherwise the linker will - * put them at the end, where the init stuff is which is FREED after -- * the kernel has booted. -- */ -+ * the kernel has booted. -+ */ - - #include -- -+ - jiffies = jiffies_64; - SECTIONS - { -@@ -20,7 +20,7 @@ - /* The boot section is only necessary until the VCS top level testbench */ - /* includes both flash and DRAM. */ - .boot : { *(.boot) } -- -+ - . = DRAM_VIRTUAL_BASE + 0x4000; /* See head.S and pages reserved at the start. */ - - _text = .; /* Text and read-only data. */ -@@ -35,7 +35,7 @@ - *(.text.__*) - } - -- _etext = . ; /* End of text section. */ -+ _etext = . ; /* End of text section. */ - __etext = .; - - . = ALIGN(4); /* Exception table. */ -@@ -59,7 +59,7 @@ - - . = ALIGN(8192); /* Init code and data. */ - __init_begin = .; -- .init.text : { -+ .init.text : { - _sinittext = .; - *(.init.text) - _einittext = .; -@@ -81,7 +81,7 @@ - *(.initcall5.init); - *(.initcall6.init); - *(.initcall7.init); -- __initcall_end = .; -+ __initcall_end = .; - } - - .con_initcall.init : { -@@ -94,20 +94,20 @@ - __per_cpu_start = .; - .data.percpu : { *(.data.percpu) } - __per_cpu_end = .; -- -+ - .init.ramfs : { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; -- /* -+ /* - * We fill to the next page, so we can discard all init - * pages without needing to consider what payload might be - * appended to the kernel image. - */ -- FILL (0); -+ FILL (0); - . = ALIGN (8192); - } -- -+ - __vmlinux_end = .; /* Last address of the physical file. */ - __init_end = .; - -diff -urN linux-2.6.19.2.old/arch/cris/kernel/crisksyms.c linux-2.6.19.2.dev/arch/cris/kernel/crisksyms.c ---- linux-2.6.19.2.old/arch/cris/kernel/crisksyms.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/crisksyms.c 2006-11-03 13:49:17.000000000 +0100 -@@ -9,7 +9,7 @@ - #include - #include - #include -- -+ - #include - #include - #include -@@ -28,6 +28,7 @@ - extern void __ashldi3(void); - extern void __ashrdi3(void); - extern void __lshrdi3(void); -+extern void __negdi2(void); - extern void iounmap(volatile void * __iomem); - - /* Platform dependent support */ -@@ -35,18 +36,7 @@ - EXPORT_SYMBOL(get_cmos_time); - EXPORT_SYMBOL(loops_per_usec); - --/* String functions */ --EXPORT_SYMBOL(memcmp); --EXPORT_SYMBOL(memmove); --EXPORT_SYMBOL(strstr); --EXPORT_SYMBOL(strcpy); --EXPORT_SYMBOL(strchr); --EXPORT_SYMBOL(strcmp); --EXPORT_SYMBOL(strlen); --EXPORT_SYMBOL(strcat); --EXPORT_SYMBOL(strncat); --EXPORT_SYMBOL(strncmp); --EXPORT_SYMBOL(strncpy); -+EXPORT_SYMBOL(ktime_get_ts); - - /* Math functions */ - EXPORT_SYMBOL(__Udiv); -@@ -56,6 +46,7 @@ - EXPORT_SYMBOL(__ashldi3); - EXPORT_SYMBOL(__ashrdi3); - EXPORT_SYMBOL(__lshrdi3); -+EXPORT_SYMBOL(__negdi2); - - /* Memory functions */ - EXPORT_SYMBOL(__ioremap); -@@ -85,4 +76,4 @@ - EXPORT_SYMBOL(del_fast_timer); - EXPORT_SYMBOL(schedule_usleep); - #endif -- -+EXPORT_SYMBOL(csum_partial); -diff -urN linux-2.6.19.2.old/arch/cris/kernel/irq.c linux-2.6.19.2.dev/arch/cris/kernel/irq.c ---- linux-2.6.19.2.old/arch/cris/kernel/irq.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/irq.c 2007-01-09 10:29:20.000000000 +0100 -@@ -92,14 +92,16 @@ - asmlinkage void do_IRQ(int irq, struct pt_regs * regs) - { - unsigned long sp; -+ struct pt_regs *old_regs = set_irq_regs(regs); - irq_enter(); - sp = rdsp(); - if (unlikely((sp & (PAGE_SIZE - 1)) < (PAGE_SIZE/8))) { - printk("do_IRQ: stack overflow: %lX\n", sp); - show_stack(NULL, (unsigned long *)sp); - } -- __do_IRQ(irq, regs); -+ __do_IRQ(irq); - irq_exit(); -+ set_irq_regs(old_regs); - } - - void weird_irq(void) -diff -urN linux-2.6.19.2.old/arch/cris/kernel/process.c linux-2.6.19.2.dev/arch/cris/kernel/process.c ---- linux-2.6.19.2.old/arch/cris/kernel/process.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/process.c 2006-06-25 17:00:10.000000000 +0200 -@@ -1,4 +1,4 @@ --/* $Id: process.c,v 1.21 2005/03/04 08:16:17 starvik Exp $ -+/* $Id: process.c,v 1.26 2006/06/25 15:00:10 starvik Exp $ - * - * linux/arch/cris/kernel/process.c - * -@@ -8,6 +8,21 @@ - * Authors: Bjorn Wesen (bjornw@axis.com) - * - * $Log: process.c,v $ -+ * Revision 1.26 2006/06/25 15:00:10 starvik -+ * Merge of Linux 2.6.17 -+ * -+ * Revision 1.25 2006/03/22 09:56:56 starvik -+ * Merge of Linux 2.6.16 -+ * -+ * Revision 1.24 2006/01/04 06:09:48 starvik -+ * Merge of Linux 2.6.15 -+ * -+ * Revision 1.23 2005/08/29 07:32:19 starvik -+ * Merge of 2.6.13 -+ * -+ * Revision 1.22 2005/08/18 08:33:18 starvik -+ * Corrected signature of machine_restart -+ * - * Revision 1.21 2005/03/04 08:16:17 starvik - * Merge of Linux 2.6.11. - * -@@ -195,12 +210,18 @@ - */ - void (*pm_idle)(void); - -+extern void default_idle(void); -+ -+void (*pm_power_off)(void); -+EXPORT_SYMBOL(pm_power_off); -+ - /* - * The idle thread. There's no useful work to be - * done, so just try to conserve power and have a - * low exit latency (ie sit in a loop waiting for - * somebody to say that they'd like to reschedule) - */ -+ - void cpu_idle (void) - { - /* endless idle loop with no priority at all */ -diff -urN linux-2.6.19.2.old/arch/cris/kernel/profile.c linux-2.6.19.2.dev/arch/cris/kernel/profile.c ---- linux-2.6.19.2.old/arch/cris/kernel/profile.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/profile.c 2004-10-05 08:22:44.000000000 +0200 -@@ -42,7 +42,7 @@ - return count; - } - --static ssize_t -+static ssize_t - write_cris_profile(struct file *file, const char __user *buf, - size_t count, loff_t *ppos) - { -diff -urN linux-2.6.19.2.old/arch/cris/kernel/ptrace.c linux-2.6.19.2.dev/arch/cris/kernel/ptrace.c ---- linux-2.6.19.2.old/arch/cris/kernel/ptrace.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/ptrace.c 2006-03-23 15:54:02.000000000 +0100 -@@ -8,6 +8,9 @@ - * Authors: Bjorn Wesen - * - * $Log: ptrace.c,v $ -+ * Revision 1.11 2006/03/23 14:54:02 starvik -+ * Corrected signal handling. -+ * - * Revision 1.10 2004/09/22 11:50:01 orjanf - * * Moved get_reg/put_reg to arch-specific files. - * * Added functions to access debug registers (CRISv32). -@@ -82,13 +85,13 @@ - /* notification of userspace execution resumption - * - triggered by current->work.notify_resume - */ --extern int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs); -+extern int do_signal(int canrestart, struct pt_regs *regs); - - --void do_notify_resume(int canrestart, sigset_t *oldset, struct pt_regs *regs, -+void do_notify_resume(int canrestart, struct pt_regs *regs, - __u32 thread_info_flags ) - { - /* deal with pending signal delivery */ - if (thread_info_flags & _TIF_SIGPENDING) -- do_signal(canrestart,oldset,regs); -+ do_signal(canrestart,regs); - } -diff -urN linux-2.6.19.2.old/arch/cris/kernel/semaphore.c linux-2.6.19.2.dev/arch/cris/kernel/semaphore.c ---- linux-2.6.19.2.old/arch/cris/kernel/semaphore.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/semaphore.c 2005-10-31 09:48:05.000000000 +0100 -@@ -4,7 +4,7 @@ - */ - - #include --#include -+#include - #include - - /* -@@ -95,6 +95,7 @@ - tsk->state = TASK_RUNNING; \ - remove_wait_queue(&sem->wait, &wait); - -+ - void __sched __down(struct semaphore * sem) - { - DOWN_VAR -diff -urN linux-2.6.19.2.old/arch/cris/kernel/setup.c linux-2.6.19.2.dev/arch/cris/kernel/setup.c ---- linux-2.6.19.2.old/arch/cris/kernel/setup.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/setup.c 2007-01-09 10:29:20.000000000 +0100 -@@ -18,7 +18,7 @@ - #include - #include - #include -- -+#include - #include - - /* -@@ -36,6 +36,8 @@ - - extern unsigned long romfs_start, romfs_length, romfs_in_flash; /* from head.S */ - -+static struct cpu cpu_devices[NR_CPUS]; -+ - extern void show_etrax_copyright(void); /* arch-vX/kernel/setup.c */ - - /* This mainly sets up the memory area, and can be really confusing. -@@ -187,4 +189,14 @@ - .show = show_cpuinfo, - }; - -+static int __init topology_init(void) -+{ -+ int i; -+ -+ for_each_possible_cpu(i) { -+ return register_cpu(&cpu_devices[i], i); -+ } -+} -+ -+subsys_initcall(topology_init); - -diff -urN linux-2.6.19.2.old/arch/cris/kernel/sys_cris.c linux-2.6.19.2.dev/arch/cris/kernel/sys_cris.c ---- linux-2.6.19.2.old/arch/cris/kernel/sys_cris.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/sys_cris.c 2007-01-09 10:29:20.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: sys_cris.c,v 1.6 2004/03/11 11:38:40 starvik Exp $ -+/* $Id: sys_cris.c,v 1.7 2007/01/09 09:29:20 starvik Exp $ - * - * linux/arch/cris/kernel/sys_cris.c - * -@@ -172,3 +172,4 @@ - return -ENOSYS; - } - } -+ -diff -urN linux-2.6.19.2.old/arch/cris/kernel/time.c linux-2.6.19.2.dev/arch/cris/kernel/time.c ---- linux-2.6.19.2.old/arch/cris/kernel/time.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/time.c 2007-01-09 10:29:20.000000000 +0100 -@@ -1,4 +1,4 @@ --/* $Id: time.c,v 1.18 2005/03/04 08:16:17 starvik Exp $ -+/* $Id: time.c,v 1.23 2007/01/09 09:29:20 starvik Exp $ - * - * linux/arch/cris/kernel/time.c - * -@@ -172,10 +172,6 @@ - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - -- printk(KERN_DEBUG -- "rtc: sec 0x%x min 0x%x hour 0x%x day 0x%x mon 0x%x year 0x%x\n", -- sec, min, hour, day, mon, year); -- - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); -@@ -208,11 +204,11 @@ - cris_do_profile(struct pt_regs* regs) - { - --#if CONFIG_SYSTEM_PROFILER -+#ifdef CONFIG_SYSTEM_PROFILER - cris_profile_sample(regs); - #endif - --#if CONFIG_PROFILING -+#ifdef CONFIG_PROFILING - profile_tick(CPU_PROFILING, regs); - #endif - } -@@ -222,10 +218,15 @@ - */ - unsigned long long sched_clock(void) - { -- return (unsigned long long)jiffies * (1000000000 / HZ); -+ unsigned long long ns; -+ -+ ns = jiffies; -+ ns *= 1000000000 / HZ; -+ ns += get_ns_in_jiffie(); -+ return ns; - } - --static int -+static int - __init init_udelay(void) - { - loops_per_usec = (loops_per_jiffy * HZ) / 1000000; -diff -urN linux-2.6.19.2.old/arch/cris/kernel/traps.c linux-2.6.19.2.dev/arch/cris/kernel/traps.c ---- linux-2.6.19.2.old/arch/cris/kernel/traps.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/kernel/traps.c 2006-12-11 14:04:23.000000000 +0100 -@@ -1,66 +1,78 @@ --/* $Id: traps.c,v 1.11 2005/01/24 16:03:19 orjanf Exp $ -- * -+/* - * linux/arch/cris/traps.c - * -- * Here we handle the break vectors not used by the system call -- * mechanism, as well as some general stack/register dumping -+ * Here we handle the break vectors not used by the system call -+ * mechanism, as well as some general stack/register dumping - * things. -- * -- * Copyright (C) 2000-2002 Axis Communications AB -+ * -+ * Copyright (C) 2000-2006 Axis Communications AB - * - * Authors: Bjorn Wesen -- * Hans-Peter Nilsson -+ * Hans-Peter Nilsson - * - */ - - #include - #include -+ - #include - #include - -+extern void arch_enable_nmi(void); -+extern void stop_watchdog(void); -+extern void reset_watchdog(void); -+extern void show_registers(struct pt_regs *regs); -+ -+#ifdef CONFIG_DEBUG_BUGVERBOSE -+extern void handle_BUG(struct pt_regs *regs); -+#else -+#define handle_BUG(regs) -+#endif -+ - static int kstack_depth_to_print = 24; - --extern int raw_printk(const char *fmt, ...); -+void (*nmi_handler)(struct pt_regs*); - --void show_trace(unsigned long * stack) -+void -+show_trace(unsigned long *stack) - { - unsigned long addr, module_start, module_end; - extern char _stext, _etext; - int i; - -- raw_printk("\nCall Trace: "); -+ printk("\nCall Trace: "); - -- i = 1; -- module_start = VMALLOC_START; -- module_end = VMALLOC_END; -+ i = 1; -+ module_start = VMALLOC_START; -+ module_end = VMALLOC_END; - -- while (((long) stack & (THREAD_SIZE-1)) != 0) { -- if (__get_user (addr, stack)) { -+ while (((long)stack & (THREAD_SIZE-1)) != 0) { -+ if (__get_user(addr, stack)) { - /* This message matches "failing address" marked - s390 in ksymoops, so lines containing it will - not be filtered out by ksymoops. */ -- raw_printk ("Failing address 0x%lx\n", (unsigned long)stack); -+ printk("Failing address 0x%lx\n", (unsigned long)stack); - break; - } - stack++; - -- /* -- * If the address is either in the text segment of the -- * kernel, or in the region which contains vmalloc'ed -- * memory, it *may* be the address of a calling -- * routine; if so, print it so that someone tracing -- * down the cause of the crash will be able to figure -- * out the call path that was taken. -- */ -- if (((addr >= (unsigned long) &_stext) && -- (addr <= (unsigned long) &_etext)) || -- ((addr >= module_start) && (addr <= module_end))) { -- if (i && ((i % 8) == 0)) -- raw_printk("\n "); -- raw_printk("[<%08lx>] ", addr); -- i++; -- } -- } -+ /* -+ * If the address is either in the text segment of the -+ * kernel, or in the region which contains vmalloc'ed -+ * memory, it *may* be the address of a calling -+ * routine; if so, print it so that someone tracing -+ * down the cause of the crash will be able to figure -+ * out the call path that was taken. -+ */ -+ if (((addr >= (unsigned long)&_stext) && -+ (addr <= (unsigned long)&_etext)) || -+ ((addr >= module_start) && (addr <= module_end))) { -+ if (i && ((i % 8) == 0)) -+ printk("\n "); -+ printk("[<%08lx>] ", addr); -+ i++; -+ } -+ } - } - - /* -@@ -78,109 +90,150 @@ - * with the ksymoops maintainer. - */ - --void -+void - show_stack(struct task_struct *task, unsigned long *sp) - { -- unsigned long *stack, addr; -- int i; -+ unsigned long *stack, addr; -+ int i; - - /* - * debugging aid: "show_stack(NULL);" prints a - * back trace. - */ - -- if(sp == NULL) { -+ if (sp == NULL) { - if (task) - sp = (unsigned long*)task->thread.ksp; - else - sp = (unsigned long*)rdsp(); - } - -- stack = sp; -+ stack = sp; - -- raw_printk("\nStack from %08lx:\n ", (unsigned long)stack); -- for(i = 0; i < kstack_depth_to_print; i++) { -- if (((long) stack & (THREAD_SIZE-1)) == 0) -- break; -- if (i && ((i % 8) == 0)) -- raw_printk("\n "); -- if (__get_user (addr, stack)) { -+ printk("\nStack from %08lx:\n ", (unsigned long)stack); -+ for (i = 0; i < kstack_depth_to_print; i++) { -+ if (((long)stack & (THREAD_SIZE-1)) == 0) -+ break; -+ if (i && ((i % 8) == 0)) -+ printk("\n "); -+ if (__get_user(addr, stack)) { - /* This message matches "failing address" marked - s390 in ksymoops, so lines containing it will - not be filtered out by ksymoops. */ -- raw_printk ("Failing address 0x%lx\n", (unsigned long)stack); -+ printk("Failing address 0x%lx\n", (unsigned long)stack); - break; - } - stack++; -- raw_printk("%08lx ", addr); -- } -+ printk("%08lx ", addr); -+ } - show_trace(sp); - } - --static void (*nmi_handler)(struct pt_regs*); --extern void arch_enable_nmi(void); -+#if 0 -+/* displays a short stack trace */ - --void set_nmi_handler(void (*handler)(struct pt_regs*)) -+int -+show_stack(void) - { -- nmi_handler = handler; -- arch_enable_nmi(); -+ unsigned long *sp = (unsigned long *)rdusp(); -+ int i; -+ -+ printk("Stack dump [0x%08lx]:\n", (unsigned long)sp); -+ for (i = 0; i < 16; i++) -+ printk("sp + %d: 0x%08lx\n", i*4, sp[i]); -+ return 0; - } -+#endif - --void handle_nmi(struct pt_regs* regs) -+void -+dump_stack(void) - { -- if (nmi_handler) -- nmi_handler(regs); -+ show_stack(NULL, NULL); -+} -+ -+EXPORT_SYMBOL(dump_stack); -+ -+void -+set_nmi_handler(void (*handler)(struct pt_regs*)) -+{ -+ nmi_handler = handler; -+ arch_enable_nmi(); - } - - #ifdef CONFIG_DEBUG_NMI_OOPS --void oops_nmi_handler(struct pt_regs* regs) -+void -+oops_nmi_handler(struct pt_regs* regs) - { -- stop_watchdog(); -- raw_printk("NMI!\n"); -- show_registers(regs); -+ stop_watchdog(); -+ oops_in_progress = 1; -+ printk("NMI!\n"); -+ show_registers(regs); -+ oops_in_progress = 0; - } - --static int --__init oops_nmi_register(void) -+static int __init -+oops_nmi_register(void) - { -- set_nmi_handler(oops_nmi_handler); -- return 0; -+ set_nmi_handler(oops_nmi_handler); -+ return 0; - } - - __initcall(oops_nmi_register); - - #endif - --#if 0 --/* displays a short stack trace */ -- --int --show_stack() -+/* -+ * This gets called from entry.S when the watchdog has bitten. Show something -+ * similiar to an Oops dump, and if the kernel is configured to be a nice -+ * doggy, then halt instead of reboot. -+ */ -+void -+watchdog_bite_hook(struct pt_regs *regs) - { -- unsigned long *sp = (unsigned long *)rdusp(); -- int i; -- raw_printk("Stack dump [0x%08lx]:\n", (unsigned long)sp); -- for(i = 0; i < 16; i++) -- raw_printk("sp + %d: 0x%08lx\n", i*4, sp[i]); -- return 0; --} -+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY -+ local_irq_disable(); -+ stop_watchdog(); -+ show_registers(regs); -+ -+ while (1) -+ ; /* Do nothing. */ -+#else -+ show_registers(regs); - #endif -+} - --void dump_stack(void) -+/* This is normally the Oops function. */ -+void -+die_if_kernel(const char *str, struct pt_regs *regs, long err) - { -- show_stack(NULL, NULL); --} -+ if (user_mode(regs)) -+ return; - --EXPORT_SYMBOL(dump_stack); -+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY -+ /* -+ * This printout might take too long and could trigger -+ * the watchdog normally. If NICE_DOGGY is set, simply -+ * stop the watchdog during the printout. -+ */ -+ stop_watchdog(); -+#endif - --void __init --trap_init(void) --{ -- /* Nothing needs to be done */ -+ handle_BUG(regs); -+ -+ printk("%s: %04lx\n", str, err & 0xffff); -+ -+ show_registers(regs); -+ -+ oops_in_progress = 0; -+ -+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY -+ reset_watchdog(); -+#endif -+ do_exit(SIGSEGV); - } - --void spinning_cpu(void* addr) -+void __init -+trap_init(void) - { -- raw_printk("CPU %d spinning on %X\n", smp_processor_id(), addr); -- dump_stack(); -+ /* Nothing needs to be done */ - } -diff -urN linux-2.6.19.2.old/arch/cris/mm/fault.c linux-2.6.19.2.dev/arch/cris/mm/fault.c ---- linux-2.6.19.2.old/arch/cris/mm/fault.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/mm/fault.c 2006-09-29 13:14:06.000000000 +0200 -@@ -1,11 +1,27 @@ - /* - * linux/arch/cris/mm/fault.c - * -- * Copyright (C) 2000, 2001 Axis Communications AB -+ * Copyright (C) 2000-2006 Axis Communications AB -+ * -+ * Authors: Bjorn Wesen - * -- * Authors: Bjorn Wesen -- * - * $Log: fault.c,v $ -+ * Revision 1.25 2006/09/29 11:14:06 orjanf -+ * * Use arch-independent macro to get irp/erp for v10/v32. -+ * -+ * Revision 1.24 2006/09/29 10:58:09 orjanf -+ * * Added user mode SIGSEGV printk. -+ * -+ * Revision 1.23 2006/06/20 07:42:56 pkj -+ * Removed an unnecessary reference to raw_printk(). -+ * -+ * Revision 1.22 2005/08/29 07:32:20 starvik -+ * Merge of 2.6.13 -+ * -+ * Revision 1.21 2005/07/02 12:29:37 starvik -+ * Use the generic oops_in_progress instead of the raw_printk hack. -+ * Moved some functions to achr-independent code. -+ * - * Revision 1.20 2005/03/04 08:16:18 starvik - * Merge of Linux 2.6.11. - * -@@ -135,7 +151,6 @@ - - extern int find_fixup_code(struct pt_regs *); - extern void die_if_kernel(const char *, struct pt_regs *, long); --extern int raw_printk(const char *fmt, ...); - - /* debug of low-level TLB reload */ - #undef DEBUG -@@ -164,8 +179,8 @@ - * address. - * - * error_code: -- * bit 0 == 0 means no page found, 1 means protection fault -- * bit 1 == 0 means read, 1 means write -+ * bit 0 == 0 means no page found, 1 means protection fault -+ * bit 1 == 0 means read, 1 means write - * - * If this routine detects a bad access, it returns 1, otherwise it - * returns 0. -@@ -180,9 +195,9 @@ - struct vm_area_struct * vma; - siginfo_t info; - -- D(printk("Page fault for %lX on %X at %lX, prot %d write %d\n", -- address, smp_processor_id(), instruction_pointer(regs), -- protection, writeaccess)); -+ D(printk("Page fault for %lX on %X at %lX, prot %d write %d\n", -+ address, smp_processor_id(), instruction_pointer(regs), -+ protection, writeaccess)); - - tsk = current; - -@@ -318,6 +333,8 @@ - /* info.si_code has been set above */ - info.si_addr = (void *)address; - force_sig_info(SIGSEGV, &info, tsk); -+ printk(KERN_NOTICE "%s (pid %d) segfaults for page address %08lx at pc %08lx\n", -+ tsk->comm, tsk->pid, address, instruction_pointer(regs)); - return; - } - -@@ -325,7 +342,7 @@ - - /* Are we prepared to handle this kernel fault? - * -- * (The kernel has valid exception-points in the source -+ * (The kernel has valid exception-points in the source - * when it acesses user-memory. When it fails in one - * of those points, we find it in a table and do a jump - * to some fixup code that loads an appropriate error -@@ -340,13 +357,17 @@ - * terminate things with extreme prejudice. - */ - -- if ((unsigned long) (address) < PAGE_SIZE) -- raw_printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); -- else -- raw_printk(KERN_ALERT "Unable to handle kernel access"); -- raw_printk(" at virtual address %08lx\n",address); -+ if (!oops_in_progress) { -+ oops_in_progress = 1; -+ if ((unsigned long) (address) < PAGE_SIZE) -+ printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); -+ else -+ printk(KERN_ALERT "Unable to handle kernel access"); -+ printk(" at virtual address %08lx\n",address); - -- die_if_kernel("Oops", regs, (writeaccess << 1) | protection); -+ die_if_kernel("Oops", regs, (writeaccess << 1) | protection); -+ oops_in_progress = 0; -+ } - - do_exit(SIGKILL); - -@@ -405,8 +426,8 @@ - /* Since we're two-level, we don't need to do both - * set_pgd and set_pmd (they do the same thing). If - * we go three-level at some point, do the right thing -- * with pgd_present and set_pgd here. -- * -+ * with pgd_present and set_pgd here. -+ * - * Also, since the vmalloc area is global, we don't - * need to copy individual PTE's, it is enough to - * copy the pgd pointer into the pte page of the -diff -urN linux-2.6.19.2.old/arch/cris/mm/init.c linux-2.6.19.2.dev/arch/cris/mm/init.c ---- linux-2.6.19.2.old/arch/cris/mm/init.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/arch/cris/mm/init.c 2006-06-25 17:00:10.000000000 +0200 -@@ -7,6 +7,15 @@ - * Authors: Bjorn Wesen (bjornw@axis.com) - * - * $Log: init.c,v $ -+ * Revision 1.14 2006/06/25 15:00:10 starvik -+ * Merge of Linux 2.6.17 -+ * -+ * Revision 1.13 2005/06/20 05:30:00 starvik -+ * Remove unnecessary diff to kernel.org tree -+ * -+ * Revision 1.12 2004/08/16 12:37:24 starvik -+ * Merge of Linux 2.6.8 -+ * - * Revision 1.11 2004/05/28 09:28:56 starvik - * Calculation of loops_per_usec moved because initalization order has changed - * in Linux 2.6. diff --git a/target/linux/etrax/patches/cris/003-drivers-cris.patch b/target/linux/etrax/patches/cris/003-drivers-cris.patch deleted file mode 100644 index 1f42fc86e6..0000000000 --- a/target/linux/etrax/patches/cris/003-drivers-cris.patch +++ /dev/null @@ -1,22601 +0,0 @@ -diff -urN linux-2.6.19.2.orig/drivers/ide/cris/ide-cris.c linux-2.6.19.2.dev/drivers/ide/cris/ide-cris.c ---- linux-2.6.19.2.orig/drivers/ide/cris/ide-cris.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/ide/cris/ide-cris.c 2006-12-06 14:17:02.000000000 +0100 -@@ -1,8 +1,8 @@ --/* $Id: cris-ide-driver.patch,v 1.1 2005/06/29 21:39:07 akpm Exp $ -+/* $Id: ide-cris.c,v 1.10 2006/12/06 13:17:02 starvik Exp $ - * - * Etrax specific IDE functions, like init and PIO-mode setting etc. - * Almost the entire ide.c is used for the rest of the Etrax ATA driver. -- * Copyright (c) 2000-2005 Axis Communications AB -+ * Copyright (c) 2000-2006 Axis Communications AB - * - * Authors: Bjorn Wesen (initial version) - * Mikael Starvik (crisv32 port) -@@ -43,8 +43,8 @@ - - #define IDE_REGISTER_TIMEOUT 300 - --#define LOWDB(x) --#define D(x) -+#define LOWDB(x) -+#define D(x) - - enum /* Transfer types */ - { -@@ -88,12 +88,50 @@ - #define ATA_PIO0_STROBE 39 - #define ATA_PIO0_HOLD 9 - --int -+/* -+ * On ETRAX FS, an interrupt remains latched and active until ack:ed. -+ * Further, ATA acks are without effect as long as INTRQ is asserted, as the -+ * corresponding ATA interrupt is continuously set to active. There will be a -+ * clearing ack at the usual cris_ide_ack_intr call, but that serves just to -+ * gracefully handle an actual spurious interrupt or similar situation (which -+ * will cause an early return without further actions, see the ide_intr -+ * function). -+ * -+ * However, the normal case at time of this writing is that nothing has -+ * changed from when INTRQ was asserted until the cris_ide_ack_intr call; no -+ * ATA registers written and no status register read, so INTRQ will *remain* -+ * asserted, thus *another* interrupt will be latched, and will be seen as a -+ * spurious interrupt after the "real" interrupt is serviced. With lots of -+ * ATA traffic (as in a trivial file-copy between two drives), this will trig -+ * the condition desc->irqs_unhandled > 99900 in -+ * kernel/irq/spurious.c:note_interrupt and the system will halt. -+ * -+ * To actually get rid of the interrupt corresponding to the current INTRQ -+ * assertion, we make a second ack after the next ATA register read or write; -+ * i.e. when INTRQ must be deasserted. At that time, we don't have the hwif -+ * pointer available, so we need to stash a local copy (safe, because it'll be -+ * set and cleared within the same spin_lock_irqsave region). The pointer -+ * serves doubly as a boolean flag that an ack is needed. The caller must -+ * NULL the pointer after the "second ack". -+ */ -+ -+static ide_hwif_t *hwif_to_ack; -+ -+static int - cris_ide_ack_intr(ide_hwif_t* hwif) - { -- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, -+ /* -+ * The interrupt is shared so we need to find the interface bit number -+ * to ack. We define the ATA I/O register addresses to have the -+ * format of ata rw_ctrl2 register contents, conveniently holding this -+ * number. -+ */ -+ reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, - int, hwif->io_ports[0]); - REG_WR_INT(ata, regi_ata, rw_ack_intr, 1 << ctrl2.sel); -+ -+ /* Prepare to ack again, see above. */ -+ hwif_to_ack = hwif; - return 1; - } - -@@ -122,8 +160,24 @@ - - static void - cris_ide_write_command(unsigned long command) --{ -+{ - REG_WR_INT(ata, regi_ata, rw_ctrl2, command); /* write data to the drive's register */ -+ -+ /* -+ * Perform a pending ack if needed; see hwif_ack definition. Perhaps -+ * we should check closer that this call is really a part of the -+ * preparation to read the ATA status register or write to the ATA -+ * command register (causing deassert of INTRQ; see the ATA standard), -+ * but at time of this writing (and expected to sanely remain so), the -+ * first ATA register activity after an cris_ide_ack_intr call is -+ * certain to do exactly that. -+ */ -+ if (hwif_to_ack) { -+ /* The drive may take this long to deassert INTRQ. */ -+ ndelay(400); -+ cris_ide_ack_intr(hwif_to_ack); -+ hwif_to_ack = NULL; -+ } - } - - static void -@@ -160,8 +214,8 @@ - { - reg_ata_rw_ctrl2 ctrl2 = {0}; - ctrl2.addr = addr; -- ctrl2.cs1 = cs1; -- ctrl2.cs0 = cs0; -+ ctrl2.cs1 = !cs1; -+ ctrl2.cs0 = !cs0; - return REG_TYPE_CONV(int, reg_ata_rw_ctrl2, ctrl2); - } - -@@ -184,14 +238,14 @@ - - intr_mask.bus0 = regk_ata_yes; - intr_mask.bus1 = regk_ata_yes; -- intr_mask.bus2 = regk_ata_yes; -+ intr_mask.bus2 = regk_ata_yes; - intr_mask.bus3 = regk_ata_yes; - - REG_WR(ata, regi_ata, rw_intr_mask, intr_mask); - - crisv32_request_dma(2, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata); - crisv32_request_dma(3, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata); -- -+ - crisv32_pinmux_alloc_fixed(pinmux_ata); - crisv32_pinmux_alloc_fixed(pinmux_ata0); - crisv32_pinmux_alloc_fixed(pinmux_ata1); -@@ -204,14 +258,15 @@ - DMA_ENABLE(regi_dma3); - - DMA_WR_CMD (regi_dma2, regk_dma_set_w_size2); -- DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2); -+ DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2); - } - - static dma_descr_context mycontext __attribute__ ((__aligned__(32))); - - #define cris_dma_descr_type dma_descr_data --#define cris_pio_read regk_ata_rd --#define cris_ultra_mask 0x7 -+#define cris_pio_read (regk_ata_rd << 24) -+#define cris_ultra_mask 0x0 /* 0x7 for UDMA */ -+#define IRQ ATA_INTR_VECT - #define MAX_DESCR_SIZE 0xffffffffUL - - static unsigned long -@@ -226,6 +281,8 @@ - d->buf = (char*)virt_to_phys(buf); - d->after = d->buf + len; - d->eol = last; -+ /* assume descriptors are consecutively placed in memory */ -+ d->next = last ? 0 : (cris_dma_descr_type*)virt_to_phys(d+1); - } - - static void -@@ -237,8 +294,10 @@ - mycontext.saved_data = (dma_descr_data*)virt_to_phys(d); - mycontext.saved_data_buf = d->buf; - /* start the dma channel */ -+ if (dir) -+ flush_dma_context(&mycontext); // Cache bug workaround - DMA_START_CONTEXT(dir ? regi_dma3 : regi_dma2, virt_to_phys(&mycontext)); -- -+ - /* initiate a multi word dma read using PIO handshaking */ - trf_cnt.cnt = len >> 1; - /* Due to a "feature" the transfer count has to be one extra word for UDMA. */ -@@ -248,7 +307,7 @@ - - ctrl2.rw = dir ? regk_ata_rd : regk_ata_wr; - ctrl2.trf_mode = regk_ata_dma; -- ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio : -+ ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio : - type == TYPE_DMA ? regk_ata_dma : regk_ata_udma; - ctrl2.multi = regk_ata_yes; - ctrl2.dma_size = regk_ata_word; -@@ -339,7 +398,7 @@ - #define ATA_PIO0_STROBE 19 - #define ATA_PIO0_HOLD 4 - --int -+int - cris_ide_ack_intr(ide_hwif_t* hwif) - { - return 1; -@@ -348,13 +407,13 @@ - static inline int - cris_ide_busy(void) - { -- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ; -+ return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ; - } - - static inline int - cris_ide_ready(void) - { -- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ; -+ return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ; - } - - static inline int -@@ -364,12 +423,12 @@ - *data = (unsigned short)status; - return status & IO_MASK(R_ATA_STATUS_DATA, dav); - } -- -+ - static void - cris_ide_write_command(unsigned long command) - { -- *R_ATA_CTRL_DATA = command; --} -+ *R_ATA_CTRL_DATA = command; -+} - - static void - cris_ide_set_speed(int type, int setup, int strobe, int hold) -@@ -406,8 +465,8 @@ - cris_ide_reg_addr(unsigned long addr, int cs0, int cs1) - { - return IO_FIELD(R_ATA_CTRL_DATA, addr, addr) | -- IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0) | -- IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1); -+ IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0 ? 0 : 1) | -+ IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1 ? 0 : 1); - } - - static __init void -@@ -484,6 +543,7 @@ - #define cris_dma_descr_type etrax_dma_descr - #define cris_pio_read IO_STATE(R_ATA_CTRL_DATA, rw, read) - #define cris_ultra_mask 0x0 -+#define IRQ 4 - #define MAX_DESCR_SIZE 0x10000UL - - static unsigned long -@@ -497,8 +557,8 @@ - { - d->buf = virt_to_phys(buf); - d->sw_len = len == MAX_DESCR_SIZE ? 0 : len; -- if (last) -- d->ctrl |= d_eol; -+ d->ctrl = last ? d_eol : 0; -+ d->next = last ? 0 : virt_to_phys(d+1); /* assumes descr's in array */ - } - - static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir, int type, int len) -@@ -521,14 +581,14 @@ - *R_DMA_CH2_FIRST = virt_to_phys(d); - *R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, start); - } -- -+ - /* initiate a multi word dma read using DMA handshaking */ - - *R_ATA_TRANSFER_CNT = - IO_FIELD(R_ATA_TRANSFER_CNT, count, len >> 1); - - cmd = dir ? IO_STATE(R_ATA_CTRL_DATA, rw, read) : IO_STATE(R_ATA_CTRL_DATA, rw, write); -- cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) : -+ cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) : - IO_STATE(R_ATA_CTRL_DATA, handsh, dma); - *R_ATA_CTRL_DATA = - cmd | -@@ -570,7 +630,7 @@ - } - - #endif -- -+ - void - cris_ide_outw(unsigned short data, unsigned long reg) { - int timeleft; -@@ -597,7 +657,7 @@ - if(!timeleft) - printk("ATA timeout reg 0x%lx := 0x%x\n", reg, data); - -- cris_ide_write_command(reg|data); /* write data to the drive's register */ -+ cris_ide_write_command(reg|data); /* write data to the drive's register */ - - timeleft = IDE_REGISTER_TIMEOUT; - /* wait for transmitter ready */ -@@ -684,13 +744,15 @@ - static void cris_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int); - static int cris_dma_off (ide_drive_t *drive); - static int cris_dma_on (ide_drive_t *drive); -+static int cris_dma_host_off (ide_drive_t *drive); -+static int cris_dma_host_on (ide_drive_t *drive); - - static void tune_cris_ide(ide_drive_t *drive, u8 pio) - { - int setup, strobe, hold; - - switch(pio) -- { -+ { - case 0: - setup = ATA_PIO0_SETUP; - strobe = ATA_PIO0_STROBE; -@@ -715,7 +777,7 @@ - setup = ATA_PIO4_SETUP; - strobe = ATA_PIO4_STROBE; - hold = ATA_PIO4_HOLD; -- break; -+ break; - default: - return; - } -@@ -733,7 +795,7 @@ - } - - switch(speed) -- { -+ { - case XFER_UDMA_0: - cyc = ATA_UDMA0_CYC; - dvs = ATA_UDMA0_DVS; -@@ -765,7 +827,7 @@ - if (speed >= XFER_UDMA_0) - cris_ide_set_speed(TYPE_UDMA, cyc, dvs, 0); - else -- cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); -+ cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); - - return 0; - } -@@ -790,11 +852,13 @@ - - for(h = 0; h < MAX_HWIFS; h++) { - ide_hwif_t *hwif = &ide_hwifs[h]; -- ide_setup_ports(&hw, cris_ide_base_address(h), -+ memset(&hw, 0, sizeof(hw)); -+ ide_setup_ports(&hw, cris_ide_base_address(h), - ide_offsets, - 0, 0, cris_ide_ack_intr, -- ide_default_irq(0)); -+ IRQ); - ide_register_hw(&hw, &hwif); -+ hwif->irq = IRQ; - hwif->mmio = 2; - hwif->chipset = ide_etrax100; - hwif->tuneproc = &tune_cris_ide; -@@ -814,13 +878,15 @@ - hwif->OUTBSYNC = &cris_ide_outbsync; - hwif->INB = &cris_ide_inb; - hwif->INW = &cris_ide_inw; -- hwif->ide_dma_host_off = &cris_dma_off; -- hwif->ide_dma_host_on = &cris_dma_on; -+ hwif->ide_dma_host_off = &cris_dma_host_off; -+ hwif->ide_dma_host_on = &cris_dma_host_on; - hwif->ide_dma_off_quietly = &cris_dma_off; -+ hwif->ide_dma_on = &cris_dma_on; - hwif->udma_four = 0; - hwif->ultra_mask = cris_ultra_mask; - hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */ - hwif->swdma_mask = 0x07; /* Singleword DMA 0-2 */ -+ hwif->rqsize = 256; - } - - /* Reset pulse */ -@@ -835,13 +901,25 @@ - cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0); - } - -+static int cris_dma_host_off (ide_drive_t *drive) -+{ -+ return 0; -+} -+ -+static int cris_dma_host_on (ide_drive_t *drive) -+{ -+ return 0; -+} -+ - static int cris_dma_off (ide_drive_t *drive) - { -+ drive->using_dma = 0; - return 0; - } - - static int cris_dma_on (ide_drive_t *drive) - { -+ drive->using_dma = 1; - return 0; - } - -@@ -958,30 +1036,28 @@ - size += sg_dma_len(sg); - } - -- /* did we run out of descriptors? */ -- -- if(count >= MAX_DMA_DESCRS) { -- printk("%s: too few DMA descriptors\n", drive->name); -- return 1; -- } -- -- /* however, this case is more difficult - rw_trf_cnt cannot be more -- than 65536 words per transfer, so in that case we need to either -+ /* rw_trf_cnt cannot be more than 131072 words per transfer, -+ (- 1 word for UDMA CRC) so in that case we need to either: - 1) use a DMA interrupt to re-trigger rw_trf_cnt and continue with - the descriptors, or - 2) simply do the request here, and get dma_intr to only ide_end_request on - those blocks that were actually set-up for transfer. -+ (The ide framework will issue a new request for the remainder) - */ - -- if(ata_tot_size + size > 131072) { -+ if(ata_tot_size + size > 262140) { - printk("too large total ATA DMA request, %d + %d!\n", ata_tot_size, (int)size); - return 1; - } - -- /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. Since we -- don't handle size > 131072 only one split is necessary */ -+ /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. */ - -- if(size > MAX_DESCR_SIZE) { -+ while (size > MAX_DESCR_SIZE) { -+ /* did we run out of descriptors? */ -+ if(count >= MAX_DMA_DESCRS) { -+ printk("%s: too few DMA descriptors\n", drive->name); -+ return 1; -+ } - cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, MAX_DESCR_SIZE, 0); - count++; - ata_tot_size += MAX_DESCR_SIZE; -@@ -989,6 +1065,11 @@ - addr += MAX_DESCR_SIZE; - } - -+ /* did we run out of descriptors? */ -+ if(count >= MAX_DMA_DESCRS) { -+ printk("%s: too few DMA descriptors\n", drive->name); -+ return 1; -+ } - cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, size,i ? 0 : 1); - count++; - ata_tot_size += size; -@@ -1050,8 +1131,12 @@ - - if (id && (id->capability & 1)) { - if (ide_use_dma(drive)) { -- if (cris_config_drive_for_dma(drive)) -- return hwif->ide_dma_on(drive); -+ if (cris_config_drive_for_dma(drive)) { -+ if (hwif->ide_dma_on) -+ return hwif->ide_dma_on(drive); -+ else -+ return 1; -+ } - } - } - ---- linux-2.6.19.2.orig/drivers/serial/crisv10.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/serial/crisv10.c 2007-01-09 10:30:54.000000000 +0100 -@@ -2,7 +2,7 @@ - * - * Serial port driver for the ETRAX 100LX chip - * -- * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Axis Communications AB -+ * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB - * - * Many, many authors. Based once upon a time on serial.c for 16x50. - * -@@ -445,6 +445,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -454,8 +455,9 @@ - /* non-arch dependent serial structures are in linux/serial.h */ - #include - /* while we keep our own stuff (struct e100_serial) in a local .h file */ --#include "serial.h" -+#include "crisv10.h" - #include -+#include - - #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER - #ifndef CONFIG_ETRAX_FAST_TIMER -@@ -586,11 +588,10 @@ - static void change_speed(struct e100_serial *info); - static void rs_throttle(struct tty_struct * tty); - static void rs_wait_until_sent(struct tty_struct *tty, int timeout); --static int rs_write(struct tty_struct * tty, int from_user, -+static int rs_write(struct tty_struct * tty, - const unsigned char *buf, int count); - #ifdef CONFIG_ETRAX_RS485 --static int e100_write_rs485(struct tty_struct * tty, int from_user, -- const unsigned char *buf, int count); -+static int e100_write_rs485(struct tty_struct * tty, const unsigned char *buf, int count); - #endif - static int get_lsr_info(struct e100_serial * info, unsigned int *value); - -@@ -677,20 +678,39 @@ - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 2, -+ .dma_owner = dma_ser0, -+ .io_if = if_serial_0, - #ifdef CONFIG_ETRAX_SERIAL_PORT0 - .enabled = 1, - #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT - .dma_out_enabled = 1, -+ .dma_out_nbr = SER0_TX_DMA_NBR, -+ .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR, -+ .dma_out_irq_flags = IRQF_DISABLED, -+ .dma_out_irq_description = "serial 0 dma tr", - #else - .dma_out_enabled = 0, -+ .dma_out_nbr = UINT_MAX, -+ .dma_out_irq_nbr = 0, -+ .dma_out_irq_flags = 0, -+ .dma_out_irq_description = NULL, - #endif - #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN - .dma_in_enabled = 1, -+ .dma_in_nbr = SER0_RX_DMA_NBR, -+ .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR, -+ .dma_in_irq_flags = IRQF_DISABLED, -+ .dma_in_irq_description = "serial 0 dma rec", - #else -- .dma_in_enabled = 0 -+ .dma_in_enabled = 0, -+ .dma_in_nbr = UINT_MAX, -+ .dma_in_irq_nbr = 0, -+ .dma_in_irq_flags = 0, -+ .dma_in_irq_description = NULL, - #endif - #else - .enabled = 0, -+ .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 - #endif -@@ -712,20 +732,42 @@ - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 3, -+ .dma_owner = dma_ser1, -+ .io_if = if_serial_1, - #ifdef CONFIG_ETRAX_SERIAL_PORT1 - .enabled = 1, -+ .io_if_description = "ser1", - #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT - .dma_out_enabled = 1, -+ .dma_out_nbr = SER1_TX_DMA_NBR, -+ .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR, -+ .dma_out_irq_flags = IRQF_DISABLED, -+ .dma_out_irq_description = "serial 1 dma tr", - #else - .dma_out_enabled = 0, -+ .dma_out_nbr = UINT_MAX, -+ .dma_out_irq_nbr = 0, -+ .dma_out_irq_flags = 0, -+ .dma_out_irq_description = NULL, - #endif - #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN - .dma_in_enabled = 1, -+ .dma_in_nbr = SER1_RX_DMA_NBR, -+ .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR, -+ .dma_in_irq_flags = IRQF_DISABLED, -+ .dma_in_irq_description = "serial 1 dma rec", - #else -- .dma_in_enabled = 0 -+ .dma_in_enabled = 0, -+ .dma_in_enabled = 0, -+ .dma_in_nbr = UINT_MAX, -+ .dma_in_irq_nbr = 0, -+ .dma_in_irq_flags = 0, -+ .dma_in_irq_description = NULL, - #endif - #else - .enabled = 0, -+ .io_if_description = NULL, -+ .dma_in_irq_nbr = 0, - .dma_out_enabled = 0, - .dma_in_enabled = 0 - #endif -@@ -746,20 +788,40 @@ - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 0, -+ .dma_owner = dma_ser2, -+ .io_if = if_serial_2, - #ifdef CONFIG_ETRAX_SERIAL_PORT2 - .enabled = 1, -+ .io_if_description = "ser2", - #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT - .dma_out_enabled = 1, -+ .dma_out_nbr = SER2_TX_DMA_NBR, -+ .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR, -+ .dma_out_irq_flags = IRQF_DISABLED, -+ .dma_out_irq_description = "serial 2 dma tr", - #else - .dma_out_enabled = 0, -+ .dma_in_nbr = UINT_MAX, -+ .dma_in_irq_nbr = 0, -+ .dma_in_irq_flags = 0, -+ .dma_in_irq_description = NULL, - #endif - #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN - .dma_in_enabled = 1, -+ .dma_in_nbr = SER2_RX_DMA_NBR, -+ .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR, -+ .dma_in_irq_flags = IRQF_DISABLED, -+ .dma_in_irq_description = "serial 2 dma rec", - #else -- .dma_in_enabled = 0 -+ .dma_in_enabled = 0, -+ .dma_in_nbr = UINT_MAX, -+ .dma_in_irq_nbr = 0, -+ .dma_in_irq_flags = 0, -+ .dma_in_irq_description = NULL, - #endif - #else - .enabled = 0, -+ .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 - #endif -@@ -780,20 +842,40 @@ - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 1, -+ .dma_owner = dma_ser3, -+ .io_if = if_serial_3, - #ifdef CONFIG_ETRAX_SERIAL_PORT3 - .enabled = 1, -+ .io_if_description = "ser3", - #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT - .dma_out_enabled = 1, -+ .dma_out_nbr = SER3_TX_DMA_NBR, -+ .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR, -+ .dma_out_irq_flags = IRQF_DISABLED, -+ .dma_out_irq_description = "serial 3 dma tr", - #else - .dma_out_enabled = 0, -+ .dma_out_nbr = UINT_MAX, -+ .dma_out_irq_nbr = 0, -+ .dma_out_irq_flags = 0, -+ .dma_out_irq_description = NULL, - #endif - #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN - .dma_in_enabled = 1, -+ .dma_in_nbr = SER3_RX_DMA_NBR, -+ .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR, -+ .dma_in_irq_flags = IRQF_DISABLED, -+ .dma_in_irq_description = "serial 3 dma rec", - #else -- .dma_in_enabled = 0 -+ .dma_in_enabled = 0, -+ .dma_in_nbr = UINT_MAX, -+ .dma_in_irq_nbr = 0, -+ .dma_in_irq_flags = 0, -+ .dma_in_irq_description = NULL - #endif - #else - .enabled = 0, -+ .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 - #endif -@@ -1414,12 +1496,11 @@ - { - unsigned long flags; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - *e100_modem_pins[info->line].dtr_shadow &= ~mask; - *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; -- restore_flags(flags); -+ local_irq_restore(flags); - } - - #ifdef SERIAL_DEBUG_IO -@@ -1438,12 +1519,11 @@ - { - #ifndef CONFIG_SVINTO_SIM - unsigned long flags; -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - info->rx_ctrl &= ~E100_RTS_MASK; - info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ - info->port[REG_REC_CTRL] = info->rx_ctrl; -- restore_flags(flags); -+ local_irq_restore(flags); - #ifdef SERIAL_DEBUG_IO - printk("ser%i rts %i\n", info->line, set); - #endif -@@ -1461,12 +1541,11 @@ - unsigned char mask = e100_modem_pins[info->line].ri_mask; - unsigned long flags; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - *e100_modem_pins[info->line].ri_shadow &= ~mask; - *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; -- restore_flags(flags); -+ local_irq_restore(flags); - } - #endif - } -@@ -1479,12 +1558,11 @@ - unsigned char mask = e100_modem_pins[info->line].cd_mask; - unsigned long flags; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - *e100_modem_pins[info->line].cd_shadow &= ~mask; - *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; -- restore_flags(flags); -+ local_irq_restore(flags); - } - #endif - } -@@ -1558,8 +1636,7 @@ - /* Disable output DMA channel for the serial port in question - * ( set to something other then serialX) - */ -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); - if (info->line == 0) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == -@@ -1587,7 +1664,7 @@ - } - } - *R_GEN_CONFIG = genconfig_shadow; -- restore_flags(flags); -+ local_irq_restore(flags); - } - - -@@ -1595,8 +1672,7 @@ - { - unsigned long flags; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); - /* Enable output DMA channel for the serial port in question */ - if (info->line == 0) { -@@ -1613,7 +1689,7 @@ - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); - } - *R_GEN_CONFIG = genconfig_shadow; -- restore_flags(flags); -+ local_irq_restore(flags); - } - - static void e100_disable_rxdma_channel(struct e100_serial *info) -@@ -1623,8 +1699,7 @@ - /* Disable input DMA channel for the serial port in question - * ( set to something other then serialX) - */ -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - if (info->line == 0) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == - IO_STATE(R_GEN_CONFIG, dma7, serial0)) { -@@ -1651,7 +1726,7 @@ - } - } - *R_GEN_CONFIG = genconfig_shadow; -- restore_flags(flags); -+ local_irq_restore(flags); - } - - -@@ -1659,8 +1734,7 @@ - { - unsigned long flags; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - /* Enable input DMA channel for the serial port in question */ - if (info->line == 0) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); -@@ -1676,7 +1750,7 @@ - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); - } - *R_GEN_CONFIG = genconfig_shadow; -- restore_flags(flags); -+ local_irq_restore(flags); - } - - #ifdef SERIAL_HANDLE_EARLY_ERRORS -@@ -1783,7 +1857,7 @@ - } - - static int --e100_write_rs485(struct tty_struct *tty, int from_user, -+e100_write_rs485(struct tty_struct *tty, - const unsigned char *buf, int count) - { - struct e100_serial * info = (struct e100_serial *)tty->driver_data; -@@ -1796,7 +1870,7 @@ - */ - info->rs485.enabled = 1; - /* rs_write now deals with RS485 if enabled */ -- count = rs_write(tty, from_user, buf, count); -+ count = rs_write(tty, buf, count); - info->rs485.enabled = old_enabled; - return count; - } -@@ -1834,7 +1908,7 @@ - unsigned long flags; - unsigned long xoff; - -- save_flags(flags); cli(); -+ local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", - CIRC_CNT(info->xmit.head, - info->xmit.tail,SERIAL_XMIT_SIZE))); -@@ -1846,7 +1920,7 @@ - } - - *((unsigned long *)&info->port[REG_XOFF]) = xoff; -- restore_flags(flags); -+ local_irq_restore(flags); - } - } - -@@ -1858,7 +1932,7 @@ - unsigned long flags; - unsigned long xoff; - -- save_flags(flags); cli(); -+ local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", - CIRC_CNT(info->xmit.head, - info->xmit.tail,SERIAL_XMIT_SIZE))); -@@ -1873,7 +1947,7 @@ - info->xmit.head != info->xmit.tail && info->xmit.buf) - e100_enable_serial_tx_ready_irq(info); - -- restore_flags(flags); -+ local_irq_restore(flags); - } - } - -@@ -2053,8 +2127,7 @@ - static void flush_timeout_function(unsigned long data); - #define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ - unsigned long timer_flags; \ -- save_flags(timer_flags); \ -- cli(); \ -+ local_irq_save(timer_flags); \ - if (fast_timers[info->line].function == NULL) { \ - serial_fast_timer_started++; \ - TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ -@@ -2068,7 +2141,7 @@ - else { \ - TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ - } \ -- restore_flags(timer_flags); \ -+ local_irq_restore(timer_flags); \ - } - #define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) - -@@ -2097,8 +2170,7 @@ - { - unsigned long flags; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - - if (!info->first_recv_buffer) - info->first_recv_buffer = buffer; -@@ -2111,7 +2183,7 @@ - if (info->recv_cnt > info->max_recv_cnt) - info->max_recv_cnt = info->recv_cnt; - -- restore_flags(flags); -+ local_irq_restore(flags); - } - - static int -@@ -2131,11 +2203,7 @@ - info->icount.rx++; - } else { - struct tty_struct *tty = info->tty; -- *tty->flip.char_buf_ptr = data; -- *tty->flip.flag_buf_ptr = flag; -- tty->flip.flag_buf_ptr++; -- tty->flip.char_buf_ptr++; -- tty->flip.count++; -+ tty_insert_flip_char(tty, data, flag); - info->icount.rx++; - } - -@@ -2320,7 +2388,6 @@ - */ - return; - #endif -- info->tty->flip.count = 0; - if (info->uses_dma_in) { - /* reset the input dma channel to be sure it works */ - -@@ -2482,70 +2549,21 @@ - { - struct tty_struct *tty; - struct etrax_recv_buffer *buffer; -- unsigned int length; - unsigned long flags; -- int max_flip_size; -- -- if (!info->first_recv_buffer) -- return; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); -+ tty = info->tty; - -- if (!(tty = info->tty)) { -- restore_flags(flags); -+ if (!tty) { -+ local_irq_restore(flags); - return; - } - -- length = tty->flip.count; -- /* Don't flip more than the ldisc has room for. -- * The return value from ldisc.receive_room(tty) - might not be up to -- * date, the previous flip of up to TTY_FLIPBUF_SIZE might be on the -- * processed and not accounted for yet. -- * Since we use DMA, 1 SERIAL_DESCR_BUF_SIZE could be on the way. -- * Lets buffer data here and let flow control take care of it. -- * Since we normally flip large chunks, the ldisc don't react -- * with throttle until too late if we flip to much. -- */ -- max_flip_size = tty->ldisc.receive_room(tty); -- if (max_flip_size < 0) -- max_flip_size = 0; -- if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */ -- length + info->recv_cnt + /* We have this queued */ -- 2*SERIAL_DESCR_BUF_SIZE + /* This could be on the way */ -- TTY_THRESHOLD_THROTTLE)) { /* Some slack */ -- /* check TTY_THROTTLED first so it indicates our state */ -- if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) { -- DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles room %lu\n", max_flip_size)); -- rs_throttle(tty); -- } --#if 0 -- else if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */ -- length + info->recv_cnt + /* We have this queued */ -- SERIAL_DESCR_BUF_SIZE + /* This could be on the way */ -- TTY_THRESHOLD_THROTTLE)) { /* Some slack */ -- DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles again! %lu\n", max_flip_size)); -- rs_throttle(tty); -- } --#endif -- } -- -- if (max_flip_size > TTY_FLIPBUF_SIZE) -- max_flip_size = TTY_FLIPBUF_SIZE; -- -- while ((buffer = info->first_recv_buffer) && length < max_flip_size) { -+ while ((buffer = info->first_recv_buffer)) { - unsigned int count = buffer->length; - -- if (length + count > max_flip_size) -- count = max_flip_size - length; -- -- memcpy(tty->flip.char_buf_ptr + length, buffer->buffer, count); -- memset(tty->flip.flag_buf_ptr + length, TTY_NORMAL, count); -- tty->flip.flag_buf_ptr[length] = buffer->error; -- -- length += count; -+ tty_insert_flip_string(tty, buffer->buffer, count); - info->recv_cnt -= count; -- DFLIP(DEBUG_LOG(info->line,"flip: %i\n", length)); - - if (count == buffer->length) { - info->first_recv_buffer = buffer->next; -@@ -2560,24 +2578,7 @@ - if (!info->first_recv_buffer) - info->last_recv_buffer = NULL; - -- tty->flip.count = length; -- DFLIP(if (tty->ldisc.chars_in_buffer(tty) > 3500) { -- DEBUG_LOG(info->line, "ldisc %lu\n", -- tty->ldisc.chars_in_buffer(tty)); -- DEBUG_LOG(info->line, "flip.count %lu\n", -- tty->flip.count); -- } -- ); -- restore_flags(flags); -- -- DFLIP( -- if (1) { -- DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx); -- DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty)); -- DEBUG_LOG(info->line, "room %lu\n", tty->ldisc.receive_room(tty)); -- } -- -- ); -+ local_irq_restore(flags); - - /* this includes a check for low-latency */ - tty_flip_buffer_push(tty); -@@ -2722,21 +2723,7 @@ - printk("!NO TTY!\n"); - return info; - } -- if (tty->flip.count >= TTY_FLIPBUF_SIZE - TTY_THRESHOLD_THROTTLE) { -- /* check TTY_THROTTLED first so it indicates our state */ -- if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) { -- DFLOW(DEBUG_LOG(info->line, "rs_throttle flip.count: %i\n", tty->flip.count)); -- rs_throttle(tty); -- } -- } -- if (tty->flip.count >= TTY_FLIPBUF_SIZE) { -- DEBUG_LOG(info->line, "force FLIP! %i\n", tty->flip.count); -- tty->flip.work.func((void *) tty); -- if (tty->flip.count >= TTY_FLIPBUF_SIZE) { -- DEBUG_LOG(info->line, "FLIP FULL! %i\n", tty->flip.count); -- return info; /* if TTY_DONT_FLIP is set */ -- } -- } -+ - /* Read data and status at the same time */ - data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); - more_data: -@@ -2789,27 +2776,25 @@ - DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); - info->errorcode = ERRCODE_INSERT_BREAK; - } else { -+ unsigned char data = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); -+ char flag = TTY_NORMAL; - if (info->errorcode == ERRCODE_INSERT_BREAK) { -- info->icount.brk++; -- *tty->flip.char_buf_ptr = 0; -- *tty->flip.flag_buf_ptr = TTY_BREAK; -- tty->flip.flag_buf_ptr++; -- tty->flip.char_buf_ptr++; -- tty->flip.count++; -+ struct tty_struct *tty = info->tty; -+ tty_insert_flip_char(tty, 0, flag); - info->icount.rx++; - } -- *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); - - if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { - info->icount.parity++; -- *tty->flip.flag_buf_ptr = TTY_PARITY; -+ flag = TTY_PARITY; - } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { - info->icount.overrun++; -- *tty->flip.flag_buf_ptr = TTY_OVERRUN; -+ flag = TTY_OVERRUN; - } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { - info->icount.frame++; -- *tty->flip.flag_buf_ptr = TTY_FRAME; -+ flag = TTY_FRAME; - } -+ tty_insert_flip_char(tty, data, flag); - info->errorcode = 0; - } - info->break_detected_cnt = 0; -@@ -2825,16 +2810,12 @@ - log_int(rdpc(), 0, 0); - } - ); -- *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); -- *tty->flip.flag_buf_ptr = 0; -+ tty_insert_flip_char(tty, IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), TTY_NORMAL); - } else { - DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); - } - - -- tty->flip.flag_buf_ptr++; -- tty->flip.char_buf_ptr++; -- tty->flip.count++; - info->icount.rx++; - data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); - if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { -@@ -2972,7 +2953,7 @@ - if (info->x_char) { - unsigned char rstat; - DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); -- save_flags(flags); cli(); -+ local_irq_save(flags); - rstat = info->port[REG_STATUS]; - DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - -@@ -2981,7 +2962,7 @@ - info->x_char = 0; - /* We must enable since it is disabled in ser_interrupt */ - e100_enable_serial_tx_ready_irq(info); -- restore_flags(flags); -+ local_irq_restore(flags); - return; - } - if (info->uses_dma_out) { -@@ -2989,7 +2970,7 @@ - int i; - /* We only use normal tx interrupt when sending x_char */ - DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); -- save_flags(flags); cli(); -+ local_irq_save(flags); - rstat = info->port[REG_STATUS]; - DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - e100_disable_serial_tx_ready_irq(info); -@@ -3002,7 +2983,7 @@ - nop(); - - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); -- restore_flags(flags); -+ local_irq_restore(flags); - return; - } - /* Normal char-by-char interrupt */ -@@ -3016,7 +2997,7 @@ - } - DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); - /* Send a byte, rs485 timing is critical so turn of ints */ -- save_flags(flags); cli(); -+ local_irq_save(flags); - info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; - info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); - info->icount.tx++; -@@ -3040,7 +3021,7 @@ - /* We must enable since it is disabled in ser_interrupt */ - e100_enable_serial_tx_ready_irq(info); - } -- restore_flags(flags); -+ local_irq_restore(flags); - - if (CIRC_CNT(info->xmit.head, - info->xmit.tail, -@@ -3065,7 +3046,7 @@ - int handled = 0; - static volatile unsigned long reentered_ready_mask = 0; - -- save_flags(flags); cli(); -+ local_irq_save(flags); - irq_mask1_rd = *R_IRQ_MASK1_RD; - /* First handle all rx interrupts with ints disabled */ - info = rs_table; -@@ -3110,7 +3091,7 @@ - /* Unblock the serial interrupt */ - *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); - -- sti(); -+ local_irq_enable(); - ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ - info = rs_table; - for (i = 0; i < NR_PORTS; i++) { -@@ -3123,11 +3104,11 @@ - ready_mask <<= 2; - } - /* handle_ser_tx_interrupt enables tr_ready interrupts */ -- cli(); -+ local_irq_disable(); - /* Handle reentered TX interrupt */ - irq_mask1_rd = reentered_ready_mask; - } -- cli(); -+ local_irq_disable(); - tx_started = 0; - } else { - unsigned long ready_mask; -@@ -3143,7 +3124,7 @@ - } - } - -- restore_flags(flags); -+ local_irq_restore(flags); - return IRQ_RETVAL(handled); - } /* ser_interrupt */ - #endif -@@ -3192,13 +3173,12 @@ - if (!xmit_page) - return -ENOMEM; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - - /* if it was already initialized, skip this */ - - if (info->flags & ASYNC_INITIALIZED) { -- restore_flags(flags); -+ local_irq_restore(flags); - free_page(xmit_page); - return 0; - } -@@ -3324,7 +3304,7 @@ - - info->flags |= ASYNC_INITIALIZED; - -- restore_flags(flags); -+ local_irq_restore(flags); - return 0; - } - -@@ -3375,8 +3355,7 @@ - info->irq); - #endif - -- save_flags(flags); -- cli(); /* Disable interrupts */ -+ local_irq_save(flags); - - if (info->xmit.buf) { - free_page((unsigned long)info->xmit.buf); -@@ -3400,7 +3379,7 @@ - set_bit(TTY_IO_ERROR, &info->tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; -- restore_flags(flags); -+ local_irq_restore(flags); - } - - -@@ -3492,8 +3471,7 @@ - - #ifndef CONFIG_SVINTO_SIM - /* start with default settings and then fill in changes */ -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - /* 8 bit, no/even parity */ - info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | - IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | -@@ -3557,7 +3535,7 @@ - } - - *((unsigned long *)&info->port[REG_XOFF]) = xoff; -- restore_flags(flags); -+ local_irq_restore(flags); - #endif /* !CONFIG_SVINTO_SIM */ - - update_char_time(info); -@@ -3585,13 +3563,12 @@ - - /* this protection might not exactly be necessary here */ - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - start_transmit(info); -- restore_flags(flags); -+ local_irq_restore(flags); - } - --static int rs_raw_write(struct tty_struct * tty, int from_user, -+static int rs_raw_write(struct tty_struct * tty, - const unsigned char *buf, int count) - { - int c, ret = 0; -@@ -3614,72 +3591,37 @@ - SIMCOUT(buf, count); - return count; - #endif -- save_flags(flags); -+ local_save_flags(flags); - DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); - DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); - - -- /* the cli/restore_flags pairs below are needed because the -+ /* the local_irq_disable/restore_flags pairs below are needed because the - * DMA interrupt handler moves the info->xmit values. the memcpy - * needs to be in the critical region unfortunately, because we - * need to read xmit values, memcpy, write xmit values in one - * atomic operation... this could perhaps be avoided by more clever - * design. - */ -- if (from_user) { -- mutex_lock(&tmp_buf_mutex); -- while (1) { -- int c1; -- c = CIRC_SPACE_TO_END(info->xmit.head, -- info->xmit.tail, -- SERIAL_XMIT_SIZE); -- if (count < c) -- c = count; -- if (c <= 0) -- break; -- -- c -= copy_from_user(tmp_buf, buf, c); -- if (!c) { -- if (!ret) -- ret = -EFAULT; -- break; -- } -- cli(); -- c1 = CIRC_SPACE_TO_END(info->xmit.head, -- info->xmit.tail, -- SERIAL_XMIT_SIZE); -- if (c1 < c) -- c = c1; -- memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c); -- info->xmit.head = ((info->xmit.head + c) & -- (SERIAL_XMIT_SIZE-1)); -- restore_flags(flags); -- buf += c; -- count -= c; -- ret += c; -- } -- mutex_unlock(&tmp_buf_mutex); -- } else { -- cli(); -- while (count) { -- c = CIRC_SPACE_TO_END(info->xmit.head, -- info->xmit.tail, -- SERIAL_XMIT_SIZE); -- -- if (count < c) -- c = count; -- if (c <= 0) -- break; -- -- memcpy(info->xmit.buf + info->xmit.head, buf, c); -- info->xmit.head = (info->xmit.head + c) & -- (SERIAL_XMIT_SIZE-1); -- buf += c; -- count -= c; -- ret += c; -- } -- restore_flags(flags); -+ local_irq_disable(); -+ while (count) { -+ c = CIRC_SPACE_TO_END(info->xmit.head, -+ info->xmit.tail, -+ SERIAL_XMIT_SIZE); -+ -+ if (count < c) -+ c = count; -+ if (c <= 0) -+ break; -+ -+ memcpy(info->xmit.buf + info->xmit.head, buf, c); -+ info->xmit.head = (info->xmit.head + c) & -+ (SERIAL_XMIT_SIZE-1); -+ buf += c; -+ count -= c; -+ ret += c; - } -+ local_irq_restore(flags); - - /* enable transmitter if not running, unless the tty is stopped - * this does not need IRQ protection since if tr_running == 0 -@@ -3698,7 +3640,7 @@ - } /* raw_raw_write() */ - - static int --rs_write(struct tty_struct * tty, int from_user, -+rs_write(struct tty_struct * tty, - const unsigned char *buf, int count) - { - #if defined(CONFIG_ETRAX_RS485) -@@ -3725,7 +3667,7 @@ - } - #endif /* CONFIG_ETRAX_RS485 */ - -- count = rs_raw_write(tty, from_user, buf, count); -+ count = rs_raw_write(tty, buf, count); - - #if defined(CONFIG_ETRAX_RS485) - if (info->rs485.enabled) -@@ -3793,10 +3735,9 @@ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - info->xmit.head = info->xmit.tail = 0; -- restore_flags(flags); -+ local_irq_restore(flags); - - wake_up_interruptible(&tty->write_wait); - -@@ -3818,7 +3759,7 @@ - { - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; -- save_flags(flags); cli(); -+ local_irq_save(flags); - if (info->uses_dma_out) { - /* Put the DMA on hold and disable the channel */ - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); -@@ -3835,7 +3776,7 @@ - DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); - info->x_char = ch; - e100_enable_serial_tx_ready_irq(info); -- restore_flags(flags); -+ local_irq_restore(flags); - } - - /* -@@ -4085,61 +4026,6 @@ - return 0; - } - -- --static int --set_modem_info(struct e100_serial * info, unsigned int cmd, -- unsigned int *value) --{ -- unsigned int arg; -- -- if (copy_from_user(&arg, value, sizeof(int))) -- return -EFAULT; -- -- switch (cmd) { -- case TIOCMBIS: -- if (arg & TIOCM_RTS) { -- e100_rts(info, 1); -- } -- if (arg & TIOCM_DTR) { -- e100_dtr(info, 1); -- } -- /* Handle FEMALE behaviour */ -- if (arg & TIOCM_RI) { -- e100_ri_out(info, 1); -- } -- if (arg & TIOCM_CD) { -- e100_cd_out(info, 1); -- } -- break; -- case TIOCMBIC: -- if (arg & TIOCM_RTS) { -- e100_rts(info, 0); -- } -- if (arg & TIOCM_DTR) { -- e100_dtr(info, 0); -- } -- /* Handle FEMALE behaviour */ -- if (arg & TIOCM_RI) { -- e100_ri_out(info, 0); -- } -- if (arg & TIOCM_CD) { -- e100_cd_out(info, 0); -- } -- break; -- case TIOCMSET: -- e100_rts(info, arg & TIOCM_RTS); -- e100_dtr(info, arg & TIOCM_DTR); -- /* Handle FEMALE behaviour */ -- e100_ri_out(info, arg & TIOCM_RI); -- e100_cd_out(info, arg & TIOCM_CD); -- break; -- default: -- return -EINVAL; -- } -- return 0; --} -- -- - static void - rs_break(struct tty_struct *tty, int break_state) - { -@@ -4149,8 +4035,7 @@ - if (!info->port) - return; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - if (break_state == -1) { - /* Go to manual mode and set the txd pin to 0 */ - info->tx_ctrl &= 0x3F; /* Clear bit 7 (txd) and 6 (tr_enable) */ -@@ -4158,7 +4043,42 @@ - info->tx_ctrl |= (0x80 | 0x40); /* Set bit 7 (txd) and 6 (tr_enable) */ - } - info->port[REG_TR_CTRL] = info->tx_ctrl; -- restore_flags(flags); -+ local_irq_restore(flags); -+} -+ -+static int -+rs_tiocmset(struct tty_struct *tty, struct file * file, unsigned int set, unsigned int clear) -+{ -+ struct e100_serial * info = (struct e100_serial *)tty->driver_data; -+ -+ if (clear & TIOCM_RTS) { -+ e100_rts(info, 0); -+ } -+ if (clear & TIOCM_DTR) { -+ e100_dtr(info, 0); -+ } -+ /* Handle FEMALE behaviour */ -+ if (clear & TIOCM_RI) { -+ e100_ri_out(info, 0); -+ } -+ if (clear & TIOCM_CD) { -+ e100_cd_out(info, 0); -+ } -+ -+ if (set & TIOCM_RTS) { -+ e100_rts(info, 1); -+ } -+ if (set & TIOCM_DTR) { -+ e100_dtr(info, 1); -+ } -+ /* Handle FEMALE behaviour */ -+ if (set & TIOCM_RI) { -+ e100_ri_out(info, 1); -+ } -+ if (set & TIOCM_CD) { -+ e100_cd_out(info, 1); -+ } -+ return 0; - } - - static int -@@ -4177,10 +4097,6 @@ - switch (cmd) { - case TIOCMGET: - return get_modem_info(info, (unsigned int *) arg); -- case TIOCMBIS: -- case TIOCMBIC: -- case TIOCMSET: -- return set_modem_info(info, cmd, (unsigned int *) arg); - case TIOCGSERIAL: - return get_serial_info(info, - (struct serial_struct *) arg); -@@ -4212,7 +4128,7 @@ - if (copy_from_user(&rs485wr, (struct rs485_write*)arg, sizeof(rs485wr))) - return -EFAULT; - -- return e100_write_rs485(tty, 1, rs485wr.outc, rs485wr.outc_size); -+ return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size); - } - #endif - -@@ -4242,46 +4158,6 @@ - - } - --/* In debugport.c - register a console write function that uses the normal -- * serial driver -- */ --typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len); -- --extern debugport_write_function debug_write_function; -- --static int rs_debug_write_function(int i, const char *buf, unsigned int len) --{ -- int cnt; -- int written = 0; -- struct tty_struct *tty; -- static int recurse_cnt = 0; -- -- tty = rs_table[i].tty; -- if (tty) { -- unsigned long flags; -- if (recurse_cnt > 5) /* We skip this debug output */ -- return 1; -- -- local_irq_save(flags); -- recurse_cnt++; -- local_irq_restore(flags); -- do { -- cnt = rs_write(tty, 0, buf + written, len); -- if (cnt >= 0) { -- written += cnt; -- buf += cnt; -- len -= cnt; -- } else -- len = cnt; -- } while(len > 0); -- local_irq_save(flags); -- recurse_cnt--; -- local_irq_restore(flags); -- return 1; -- } -- return 0; --} -- - /* - * ------------------------------------------------------------ - * rs_close() -@@ -4303,11 +4179,10 @@ - - /* interrupts are disabled for this entire function */ - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - - if (tty_hung_up_p(filp)) { -- restore_flags(flags); -+ local_irq_restore(flags); - return; - } - -@@ -4334,7 +4209,7 @@ - info->count = 0; - } - if (info->count) { -- restore_flags(flags); -+ local_irq_restore(flags); - return; - } - info->flags |= ASYNC_CLOSING; -@@ -4388,7 +4263,7 @@ - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); -- restore_flags(flags); -+ local_irq_restore(flags); - - /* port closed */ - -@@ -4410,6 +4285,28 @@ - #endif - } - #endif -+ -+ /* -+ * Release any allocated DMA irq's. -+ */ -+ if (info->dma_in_enabled) { -+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); -+ free_irq(info->dma_in_irq_nbr, -+ info); -+ info->uses_dma_in = 0; -+#ifdef SERIAL_DEBUG_OPEN -+ printk("DMA irq '%s' freed\n", info->dma_in_irq_description); -+#endif -+ } -+ if (info->dma_out_enabled) { -+ free_irq(info->dma_out_irq_nbr, -+ info); -+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); -+ info->uses_dma_out = 0; -+#ifdef SERIAL_DEBUG_OPEN -+ printk("DMA irq '%s' freed\n", info->dma_out_irq_description); -+#endif -+ } - } - - /* -@@ -4485,7 +4382,7 @@ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) -- interruptible_sleep_on(&info->close_wait); -+ wait_event_interruptible(info->close_wait, 0); - #ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; -@@ -4523,21 +4420,19 @@ - printk("block_til_ready before block: ttyS%d, count = %d\n", - info->line, info->count); - #endif -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - if (!tty_hung_up_p(filp)) { - extra_count++; - info->count--; - } -- restore_flags(flags); -+ local_irq_restore(flags); - info->blocked_open++; - while (1) { -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - /* assert RTS and DTR */ - e100_rts(info, 1); - e100_dtr(info, 1); -- restore_flags(flags); -+ local_irq_restore(flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { -@@ -4589,9 +4484,9 @@ - struct e100_serial *info; - int retval, line; - unsigned long page; -+ int allocated_resources = 0; - - /* find which port we want to open */ -- - line = tty->index; - - if (line < 0 || line >= NR_PORTS) -@@ -4632,7 +4527,7 @@ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) -- interruptible_sleep_on(&info->close_wait); -+ wait_event_interruptible(info->close_wait, 0); - #ifdef SERIAL_DO_RESTART - return ((info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); -@@ -4642,12 +4537,79 @@ - } - - /* -+ * If DMA is enabled try to allocate the irq's. -+ */ -+ if (info->count == 1) { -+ allocated_resources = 1; -+ if (info->dma_in_enabled) { -+ if (request_irq(info->dma_in_irq_nbr, -+ rec_interrupt, -+ info->dma_in_irq_flags, -+ info->dma_in_irq_description, -+ info)) { -+ printk(KERN_WARNING "DMA irq '%s' busy; falling back to non-DMA mode\n", info->dma_in_irq_description); -+ /* Make sure we never try to use DMA in for the port again. */ -+ info->dma_in_enabled = 0; -+ } else if (cris_request_dma(info->dma_in_nbr, -+ info->dma_in_irq_description, -+ DMA_VERBOSE_ON_ERROR, -+ info->dma_owner)) { -+ free_irq(info->dma_in_irq_nbr, info); -+ printk(KERN_WARNING "DMA '%s' busy; falling back to non-DMA mode\n", info->dma_in_irq_description); -+ /* Make sure we never try to use DMA in for the port again. */ -+ info->dma_in_enabled = 0; -+ } -+#ifdef SERIAL_DEBUG_OPEN -+ else printk("DMA irq '%s' allocated\n", info->dma_in_irq_description); -+#endif -+ } -+ if (info->dma_out_enabled) { -+ if (request_irq(info->dma_out_irq_nbr, -+ tr_interrupt, -+ info->dma_out_irq_flags, -+ info->dma_out_irq_description, -+ info)) { -+ printk(KERN_WARNING "DMA irq '%s' busy; falling back to non-DMA mode\n", info->dma_out_irq_description); -+ /* Make sure we never try to use DMA out for the port again. */ -+ info->dma_out_enabled = 0; -+ } else if (cris_request_dma(info->dma_out_nbr, -+ info->dma_out_irq_description, -+ DMA_VERBOSE_ON_ERROR, -+ info->dma_owner)) { -+ free_irq(info->dma_out_irq_nbr, info); -+ printk(KERN_WARNING "DMA '%s' busy; falling back to non-DMA mode\n", info->dma_out_irq_description); -+ /* Make sure we never try to use DMA in for the port again. */ -+ info->dma_out_enabled = 0; -+ } -+#ifdef SERIAL_DEBUG_OPEN -+ else printk("DMA irq '%s' allocated\n", info->dma_out_irq_description); -+#endif -+ } -+ } -+ -+ /* - * Start up the serial port - */ - - retval = startup(info); -- if (retval) -- return retval; -+ if (retval) { -+ if (allocated_resources) { -+ if (info->dma_out_enabled) { -+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); -+ free_irq(info->dma_out_irq_nbr, -+ info); -+ } -+ if (info->dma_in_enabled) { -+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); -+ free_irq(info->dma_in_irq_nbr, -+ info); -+ } -+ } -+ /* FIXME Decrease count info->count here too? */ -+ return retval; -+ -+ } -+ - - retval = block_til_ready(tty, filp, info); - if (retval) { -@@ -4655,6 +4617,19 @@ - printk("rs_open returning after block_til_ready with %d\n", - retval); - #endif -+ if (allocated_resources) { -+ if (info->dma_out_enabled) { -+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); -+ free_irq(info->dma_out_irq_nbr, -+ info); -+ } -+ if (info->dma_in_enabled) { -+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); -+ free_irq(info->dma_in_irq_nbr, -+ info); -+ } -+ } -+ - return retval; - } - -@@ -4844,6 +4819,7 @@ - .send_xchar = rs_send_xchar, - .wait_until_sent = rs_wait_until_sent, - .read_proc = rs_read_proc, -+ .tiocmset = rs_tiocmset - }; - - static int __init -@@ -4863,7 +4839,22 @@ - #if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) - init_timer(&flush_timer); - flush_timer.function = timed_flush_handler; -- mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); -+ mod_timer(&flush_timer, jiffies + 5); -+#endif -+ -+#if defined(CONFIG_ETRAX_RS485) -+#if defined(CONFIG_ETRAX_RS485_ON_PA) -+ if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, rs485_pa_bit)) { -+ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate RS485 pin\n"); -+ return -EBUSY; -+ } -+#endif -+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) -+ if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, rs485_port_g_bit)) { -+ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate RS485 pin\n"); -+ return -EBUSY; -+ } -+#endif - #endif - - /* Initialize the tty_driver structure */ -@@ -4888,6 +4879,14 @@ - /* do some initializing for the separate ports */ - - for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { -+ if (info->enabled) { -+ if (cris_request_io_interface(info->io_if, info->io_if_description)) { -+ printk(KERN_CRIT "ETRAX100LX async serial: Could not allocate IO pins for %s, port %d\n", -+ info->io_if_description, -+ i); -+ info->enabled = 0; -+ } -+ } - info->uses_dma_in = 0; - info->uses_dma_out = 0; - info->line = i; -@@ -4939,64 +4938,16 @@ - #endif - - #ifndef CONFIG_SVINTO_SIM -+#ifndef CONFIG_ETRAX_KGDB - /* Not needed in simulator. May only complicate stuff. */ - /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ - -- if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL)) -- panic("irq8"); -- --#ifdef CONFIG_ETRAX_SERIAL_PORT0 --#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT -- if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL)) -- panic("irq22"); --#endif --#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN -- if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL)) -- panic("irq23"); --#endif --#endif -- --#ifdef CONFIG_ETRAX_SERIAL_PORT1 --#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT -- if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL)) -- panic("irq24"); --#endif --#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN -- if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL)) -- panic("irq25"); --#endif --#endif --#ifdef CONFIG_ETRAX_SERIAL_PORT2 -- /* DMA Shared with par0 (and SCSI0 and ATA) */ --#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT -- if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL)) -- panic("irq18"); --#endif --#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN -- if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL)) -- panic("irq19"); --#endif --#endif --#ifdef CONFIG_ETRAX_SERIAL_PORT3 -- /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */ --#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT -- if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL)) -- panic("irq20"); --#endif --#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN -- if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL)) -- panic("irq21"); --#endif --#endif -+ if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", driver)) -+ panic("%s: Failed to request irq8", __FUNCTION__); - --#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST -- if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED, -- "fast serial dma timeout", NULL)) { -- printk(KERN_CRIT "err: timer1 irq\n"); -- } - #endif - #endif /* CONFIG_SVINTO_SIM */ -- debug_write_function = rs_debug_write_function; -+ - return 0; - } - ---- linux-2.6.19.2.orig/drivers/serial/crisv10.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/serial/crisv10.h 2006-10-13 14:44:38.000000000 +0200 -@@ -9,6 +9,8 @@ - - #include - #include -+#include -+#include - - /* Software state per channel */ - -@@ -61,6 +63,19 @@ - u8 dma_in_enabled:1; /* Set to 1 if DMA should be used */ - - /* end of fields defined in rs_table[] in .c-file */ -+ int dma_owner; -+ unsigned int dma_in_nbr; -+ unsigned int dma_out_nbr; -+ unsigned int dma_in_irq_nbr; -+ unsigned int dma_out_irq_nbr; -+ unsigned long dma_in_irq_flags; -+ unsigned long dma_out_irq_flags; -+ char *dma_in_irq_description; -+ char *dma_out_irq_description; -+ -+ enum cris_io_interface io_if; -+ char *io_if_description; -+ - u8 uses_dma_in; /* Set to 1 if DMA is used */ - u8 uses_dma_out; /* Set to 1 if DMA is used */ - u8 forced_eop; /* a fifo eop has been forced */ ---- linux-2.6.19.2.orig/drivers/serial/crisv32.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/serial/crisv32.c 2007-01-05 09:59:53.000000000 +0100 -@@ -0,0 +1,2333 @@ -+/* $Id: crisv32.c,v 1.78 2007/01/05 08:59:53 starvik Exp $ -+ * -+ * Serial port driver for the ETRAX FS chip -+ * -+ * Copyright (C) 1998-2006 Axis Communications AB -+ * -+ * Many, many authors. Based once upon a time on serial.c for 16x50. -+ * -+ * Johan Adolfsson - port to ETRAX FS -+ * Mikael Starvik - port to serial_core framework -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define UART_NR 5 /* 4 ports + dummy port */ -+#define SERIAL_RECV_DESCRIPTORS 8 -+ -+/* We only buffer 255 characters here, no need for more tx descriptors. */ -+#define SERIAL_TX_DESCRIPTORS 4 -+ -+/* Kept for experimental purposes. */ -+#define ETRAX_SER_FIFO_SIZE 1 -+#define SERIAL_DESCR_BUF_SIZE 256 -+#define regi_NULL 0 -+#define DMA_WAIT_UNTIL_RESET(inst) \ -+ do { \ -+ reg_dma_rw_stat r; \ -+ do { \ -+ r = REG_RD(dma, (inst), rw_stat); \ -+ } while (r.mode != regk_dma_rst); \ -+ } while (0) -+ -+/* Macro to set up control lines for a port. */ -+#define SETUP_PINS(port) \ -+ if (serial_cris_ports[port].used) { \ -+ if (strcmp(CONFIG_ETRAX_SER##port##_DTR_BIT, "")) \ -+ crisv32_io_get_name(&serial_cris_ports[port].dtr_pin, \ -+ CONFIG_ETRAX_SER##port##_DTR_BIT); \ -+ else \ -+ serial_cris_ports[port].dtr_pin = dummy_pin; \ -+ if (strcmp(CONFIG_ETRAX_SER##port##_DSR_BIT, "")) \ -+ crisv32_io_get_name(&serial_cris_ports[port].dsr_pin, \ -+ CONFIG_ETRAX_SER##port##_DSR_BIT); \ -+ else \ -+ serial_cris_ports[port].dsr_pin = dummy_pin; \ -+ if (strcmp(CONFIG_ETRAX_SER##port##_RI_BIT, "")) \ -+ crisv32_io_get_name(&serial_cris_ports[port].ri_pin, \ -+ CONFIG_ETRAX_SER##port##_RI_BIT); \ -+ else \ -+ serial_cris_ports[port].ri_pin = dummy_pin; \ -+ if (strcmp(CONFIG_ETRAX_SER##port##_CD_BIT, "")) \ -+ crisv32_io_get_name(&serial_cris_ports[port].cd_pin, \ -+ CONFIG_ETRAX_SER##port##_CD_BIT); \ -+ else \ -+ serial_cris_ports[port].cd_pin = dummy_pin; \ -+ } -+ -+/* Set a serial port register if anything has changed. */ -+#define MODIFY_REG(instance, reg, var) \ -+ if (REG_RD_INT(ser, instance, reg) \ -+ != REG_TYPE_CONV(int, reg_ser_##reg, var)) \ -+ REG_WR(ser, instance, reg, var); -+ -+/* -+ * Regarding RS485 operation in crisv32 serial driver. -+ * --------------------------------------------------- -+ * RS485 can be run in two modes, full duplex using four wires (485FD) and -+ * half duplex using two wires (485HD). The default mode of each serial port -+ * is configured in the kernel configuration. The available modes are: -+ * RS-232, RS-485 half duplex, and RS-485 full duplex. -+ * -+ * In the 485HD mode the direction of the data bus must be able to switch. -+ * The direction of the transceiver is controlled by the RTS signal. Hence -+ * the auto_rts function in the ETRAX FS chip is enabled in this mode, which -+ * automatically toggle RTS when transmitting. The initial direction of the -+ * port is receiving. -+ * -+ * In the 485FD mode two transceivers will be used, one in each direction. -+ * Usually the hardware can handle both 485HD and 485FD, which implies that -+ * one of the transceivers can change direction. Consequently that transceiver -+ * must be tied to operate in the opposite direction of the other one, setting -+ * and keeping RTS to a fixed value do this. -+ * -+ * There are two special "ioctl" that can configure the ports. These two are -+ * left for backward compatible with older applications. The effects of using -+ * them are described below: -+ * The TIOCSERSETRS485: -+ * This ioctl sets a serial port in 232 mode to 485HD mode or vise versa. The -+ * state of the port is kept when closing the port. Note that this ioctl has no -+ * effect on a serial port in the 485FD mode. -+ * The TIOCSERWRRS485: -+ * This ioctl set a serial port in 232 mode to 485HD mode and writes the data -+ * "included" in the ioctl to the port. The port will then stay in 485HD mode. -+ * Using this ioctl on a serial port in the 485HD mode will transmit the data -+ * without changing the mode. Using this ioctl on a serial port in 485FD mode -+ * will not change the mode and simply send the data using the 485FD mode. -+ */ -+ -+#define TYPE_232 0 -+#define TYPE_485HD 1 -+#define TYPE_485FD 2 -+ -+struct etrax_recv_buffer { -+ struct etrax_recv_buffer *next; -+ unsigned short length; -+ unsigned char error; -+ unsigned char pad; -+ -+ unsigned char buffer[0]; -+}; -+ -+struct uart_cris_port { -+ struct uart_port port; -+ -+ int initialized; -+ int used; -+ int irq; -+ -+ /* Used to check if port enabled as well by testing for zero. */ -+ reg_scope_instances regi_ser; -+ reg_scope_instances regi_dmain; -+ reg_scope_instances regi_dmaout; -+ -+ struct crisv32_iopin dtr_pin; -+ struct crisv32_iopin dsr_pin; -+ struct crisv32_iopin ri_pin; -+ struct crisv32_iopin cd_pin; -+ -+ struct dma_descr_context tr_context_descr -+ __attribute__ ((__aligned__(32))); -+ struct dma_descr_data tr_descr[SERIAL_TX_DESCRIPTORS] -+ __attribute__ ((__aligned__(32))); -+ struct dma_descr_context rec_context_descr -+ __attribute__ ((__aligned__(32))); -+ struct dma_descr_data rec_descr[SERIAL_RECV_DESCRIPTORS] -+ __attribute__ ((__aligned__(32))); -+ -+ /* This is the first one in the list the HW is working on now. */ -+ struct dma_descr_data* first_tx_descr; -+ -+ /* This is the last one in the list the HW is working on now. */ -+ struct dma_descr_data* last_tx_descr; -+ -+ /* This is how many characters the HW is working on now. */ -+ unsigned int tx_pending_chars; -+ -+ int tx_started; -+ unsigned int cur_rec_descr; -+ struct etrax_recv_buffer *first_recv_buffer; -+ struct etrax_recv_buffer *last_recv_buffer; -+ -+ unsigned int recv_cnt; -+ unsigned int max_recv_cnt; -+ -+ /* The time for 1 char, in usecs. */ -+ unsigned long char_time_usec; -+ -+ /* Last tx usec in the jiffies. */ -+ unsigned long last_tx_active_usec; -+ -+ /* Last tx time in jiffies. */ -+ unsigned long last_tx_active; -+ -+ /* Last rx usec in the jiffies. */ -+ unsigned long last_rx_active_usec; -+ -+ /* Last rx time in jiffies. */ -+ unsigned long last_rx_active; -+ -+#ifdef CONFIG_ETRAX_RS485 -+ /* RS-485 support, duh. */ -+ struct rs485_control rs485; -+#endif -+ int port_type; -+}; -+ -+extern struct uart_driver serial_cris_driver; -+static struct uart_port *console_port; -+static int console_baud = 115200; -+static struct uart_cris_port serial_cris_ports[UART_NR] = { -+{ -+#ifdef CONFIG_ETRAX_SERIAL_PORT0 -+ .used = 1, -+ .irq = SER0_INTR_VECT, -+ .regi_ser = regi_ser0, -+ /* -+ * We initialize the dma stuff like this to get a compiler error -+ * if a CONFIG is missing -+ */ -+ .regi_dmain = -+# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN -+ regi_dma7, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN -+ regi_NULL, -+# endif -+ -+ .regi_dmaout = -+# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT -+ regi_dma6, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT -+ regi_NULL, -+# endif -+ -+# ifdef CONFIG_ETRAX_RS485 -+# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485HD -+ .port_type = TYPE_485HD, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485FD -+ .port_type = TYPE_485FD, -+# endif -+# endif -+#else -+ .regi_ser = regi_NULL, -+ .regi_dmain = regi_NULL, -+ .regi_dmaout = regi_NULL, -+#endif -+}, /* ttyS0 */ -+{ -+#ifdef CONFIG_ETRAX_SERIAL_PORT1 -+ .used = 1, -+ .irq = SER1_INTR_VECT, -+ .regi_ser = regi_ser1, -+ .regi_dmain = -+# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN -+ regi_dma5, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN -+ regi_NULL, -+# endif -+ -+ .regi_dmaout = -+# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT -+ regi_dma4, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT -+ regi_NULL, -+# endif -+ -+# ifdef CONFIG_ETRAX_RS485 -+# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485HD -+ .port_type = TYPE_485HD, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485FD -+ .port_type = TYPE_485FD, -+# endif -+# endif -+#else -+ .regi_ser = regi_NULL, -+ .regi_dmain = regi_NULL, -+ .regi_dmaout = regi_NULL, -+#endif -+}, /* ttyS1 */ -+{ -+#ifdef CONFIG_ETRAX_SERIAL_PORT2 -+ .used = 1, -+ .irq = SER2_INTR_VECT, -+ .regi_ser = regi_ser2, -+ .regi_dmain = -+# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN -+ regi_dma3, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN -+ regi_NULL, -+# endif -+ -+ .regi_dmaout = -+# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT -+ regi_dma2, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT -+ regi_NULL, -+# endif -+ -+# ifdef CONFIG_ETRAX_RS485 -+# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485HD -+ .port_type = TYPE_485HD, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485FD -+ .port_type = TYPE_485FD, -+# endif -+# endif -+#else -+ .regi_ser = regi_NULL, -+ .regi_dmain = regi_NULL, -+ .regi_dmaout = regi_NULL, -+#endif -+}, /* ttyS2 */ -+{ -+#ifdef CONFIG_ETRAX_SERIAL_PORT3 -+ .used = 1, -+ .irq = SER3_INTR_VECT, -+ .regi_ser = regi_ser3, -+ .regi_dmain = -+# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN -+ regi_dma9, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN -+ regi_NULL, -+# endif -+ -+ .regi_dmaout = -+# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT -+ regi_dma8, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT -+ regi_NULL, -+# endif -+ -+# ifdef CONFIG_ETRAX_RS485 -+# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485HD -+ .port_type = TYPE_485HD, -+# endif -+# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485FD -+ .port_type = TYPE_485FD, -+# endif -+# endif -+#else -+ .regi_ser = regi_NULL, -+ .regi_dmain = regi_NULL, -+ .regi_dmaout = regi_NULL, -+#endif -+}, /* ttyS3 */ -+{ -+#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL -+ .used = 1, -+#endif -+ .regi_ser = regi_NULL -+} /* Dummy console port */ -+ -+}; -+ -+/* Dummy pin used for unused CD, DSR, DTR and RI signals. */ -+static unsigned long io_dummy; -+static struct crisv32_ioport dummy_port = -+{ -+ &io_dummy, -+ &io_dummy, -+ &io_dummy, -+ 18 -+}; -+static struct crisv32_iopin dummy_pin = -+{ -+ &dummy_port, -+ 0 -+}; -+ -+static int selected_console = -+#if defined(CONFIG_ETRAX_DEBUG_PORT0) -+0; -+#elif defined(CONFIG_ETRAX_DEBUG_PORT1) -+1; -+#elif defined(CONFIG_ETRAX_DEBUG_PORT2) -+2; -+#elif defined(CONFIG_ETRAX_DEBUG_PORT3) -+3; -+#else /* CONFIG_ETRAX_DEBUG_PORT_NULL */ -+4; -+#endif -+ -+extern void reset_watchdog(void); -+ -+/* -+ * Interrupts are disabled on entering -+ */ -+static void -+cris_console_write(struct console *co, const char *s, unsigned int count) -+{ -+ struct uart_cris_port *up; -+ int i; -+ reg_ser_r_stat_din stat; -+ reg_ser_rw_tr_dma_en tr_dma_en, old; -+ -+ up = &serial_cris_ports[selected_console]; -+ -+ /* -+ * This function isn't covered by the struct uart_ops, so we -+ * have to check manually that the port really is there, -+ * configured and live. -+ */ -+ if (!up->regi_ser) -+ return; -+ -+ /* Switch to manual mode. */ -+ tr_dma_en = old = REG_RD (ser, up->regi_ser, rw_tr_dma_en); -+ if (tr_dma_en.en == regk_ser_yes) { -+ tr_dma_en.en = regk_ser_no; -+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en); -+ } -+ -+ /* Send data. */ -+ for (i = 0; i < count; i++) { -+ /* LF -> CRLF */ -+ if (s[i] == '\n') { -+ do { -+ stat = REG_RD (ser, up->regi_ser, r_stat_din); -+ } while (!stat.tr_rdy); -+ REG_WR_INT (ser, up->regi_ser, rw_dout, '\r'); -+ } -+ /* Wait until transmitter is ready and send. */ -+ do { -+ stat = REG_RD (ser, up->regi_ser, r_stat_din); -+ } while (!stat.tr_rdy); -+ REG_WR_INT (ser, up->regi_ser, rw_dout, s[i]); -+ -+ /* Feed watchdog, because this may take looong time. */ -+ reset_watchdog(); -+ } -+ -+ /* Restore mode. */ -+ if (tr_dma_en.en != old.en) -+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, old); -+} -+ -+static void cris_serial_port_init(struct uart_port *port, int line); -+static int __init -+cris_console_setup(struct console *co, char *options) -+{ -+ struct uart_port *port; -+ int baud = 115200; -+ int bits = 8; -+ int parity = 'n'; -+ int flow = 'n'; -+ -+ if (co->index >= UART_NR) -+ co->index = 0; -+ if (options) -+ selected_console = co->index; -+ port = &serial_cris_ports[selected_console].port; -+ console_port = port; -+ -+ if (options) -+ uart_parse_options(options, &baud, &parity, &bits, &flow); -+ console_baud = baud; -+ cris_serial_port_init(port, selected_console); -+ co->index = port->line; -+ uart_set_options(port, co, baud, parity, bits, flow); -+ -+ return 0; -+} -+ -+static struct tty_driver* -+cris_console_device(struct console* co, int *index) -+{ -+ struct uart_driver *p = co->data; -+ *index = selected_console; -+ return p->tty_driver; -+} -+ -+static struct console cris_console = { -+ .name = "ttyS", -+ .write = cris_console_write, -+ .device = cris_console_device, -+ .setup = cris_console_setup, -+ .flags = CON_PRINTBUFFER, -+ .index = -1, -+ .data = &serial_cris_driver, -+}; -+ -+#define SERIAL_CRIS_CONSOLE &cris_console -+ -+struct uart_driver serial_cris_driver = { -+ .owner = THIS_MODULE, -+ .driver_name = "serial", -+ .dev_name = "ttyS", -+ .major = TTY_MAJOR, -+ .minor = 64, -+ .nr = UART_NR, -+ .cons = SERIAL_CRIS_CONSOLE, -+}; -+ -+static int inline crisv32_serial_get_rts(struct uart_cris_port *up) -+{ -+ reg_scope_instances regi_ser = up->regi_ser; -+ /* -+ * Return what the user has controlled rts to or -+ * what the pin is? (if auto_rts is used it differs during tx) -+ */ -+ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din); -+ return !(rstat.rts_n == regk_ser_active); -+} -+ -+/* -+ * A set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive -+ * 0=0V , 1=3.3V -+ */ -+static inline void crisv32_serial_set_rts(struct uart_cris_port *up, int set) -+{ -+ reg_scope_instances regi_ser = up->regi_ser; -+ -+#ifdef CONFIG_ETRAX_RS485 -+ /* Never toggle RTS if port is in 485 mode. If port is in 485FD mode we -+ * do not want to send with the reciever and for 485HD mode auto_rts -+ * take care of the RTS for us. -+ */ -+ if (!up->rs485.enabled) { -+#else -+ { -+#endif -+ unsigned long flags; -+ reg_ser_rw_rec_ctrl rec_ctrl; -+ -+ local_irq_save(flags); -+ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); -+ if (set) -+ rec_ctrl.rts_n = regk_ser_active; -+ else -+ rec_ctrl.rts_n = regk_ser_inactive; -+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); -+ local_irq_restore(flags); -+ } -+} -+ -+/* Input */ -+static int inline crisv32_serial_get_cts(struct uart_cris_port *up) -+{ -+ reg_scope_instances regi_ser = up->regi_ser; -+ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din); -+ return (rstat.cts_n == regk_ser_active); -+} -+ -+/* -+ * Send a single character for XON/XOFF purposes. We do it in this separate -+ * function instead of the alternative support port.x_char, in the ...start_tx -+ * function, so we don't mix up this case with possibly enabling transmission -+ * of queued-up data (in case that's disabled after *receiving* an XOFF or -+ * negative CTS). This function is used for both DMA and non-DMA case; see HW -+ * docs specifically blessing sending characters manually when DMA for -+ * transmission is enabled and running. We may be asked to transmit despite -+ * the transmitter being disabled by a ..._stop_tx call so we need to enable -+ * it temporarily but restore the state afterwards. -+ * -+ * Beware: I'm not sure how the RS-485 stuff is supposed to work. Using -+ * XON/XOFF seems problematic if there are several controllers, but if it's -+ * actually RS-422 (multi-drop; one sender and multiple receivers), it might -+ * Just Work, so don't bail out just because it looks a little suspicious. -+ */ -+ -+void serial_cris_send_xchar(struct uart_port *port, char ch) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ reg_ser_rw_dout dout = { .data = ch }; -+ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes }; -+ reg_ser_r_stat_din rstat; -+ reg_ser_rw_tr_ctrl prev_tr_ctrl, tr_ctrl; -+ reg_scope_instances regi_ser = up->regi_ser; -+ unsigned long flags; -+ -+ /* -+ * Wait for tr_rdy in case a character is already being output. Make -+ * sure we have integrity between the register reads and the writes -+ * below, but don't busy-wait with interrupts off and the port lock -+ * taken. -+ */ -+ spin_lock_irqsave(&port->lock, flags); -+ do { -+ spin_unlock_irqrestore(&port->lock, flags); -+ spin_lock_irqsave(&port->lock, flags); -+ prev_tr_ctrl = tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); -+ rstat = REG_RD(ser, regi_ser, r_stat_din); -+ } while (!rstat.tr_rdy); -+ -+ /* -+ * Ack an interrupt if one was just issued for the previous character -+ * that was output. This is required for non-DMA as the interrupt is -+ * used as the only indicator that the transmitter is ready and it -+ * isn't while this x_char is being transmitted. -+ */ -+ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr); -+ -+ /* Enable the transmitter in case it was disabled. */ -+ tr_ctrl.stop = 0; -+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); -+ -+ /* -+ * Finally, send the blessed character; nothing should stop it now, -+ * except for an xoff-detected state, which we'll handle below. -+ */ -+ REG_WR(ser, regi_ser, rw_dout, dout); -+ up->port.icount.tx++; -+ -+ /* There might be an xoff state to clear. */ -+ rstat = REG_RD(ser, up->regi_ser, r_stat_din); -+ -+ /* -+ * Clear any xoff state that *may* have been there to -+ * inhibit transmission of the character. -+ */ -+ if (rstat.xoff_detect) { -+ reg_ser_rw_xoff_clr xoff_clr = { .clr = 1 }; -+ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr); -+ reg_ser_rw_tr_dma_en tr_dma_en -+ = REG_RD(ser, regi_ser, rw_tr_dma_en); -+ -+ /* -+ * If we had an xoff state but cleared it, instead sneak in a -+ * disabled state for the transmitter, after the character we -+ * sent. Thus we keep the port disabled, just as if the xoff -+ * state was still in effect (or actually, as if stop_tx had -+ * been called, as we stop DMA too). -+ */ -+ prev_tr_ctrl.stop = 1; -+ -+ tr_dma_en.en = 0; -+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); -+ } -+ -+ /* Restore "previous" enabled/disabled state of the transmitter. */ -+ REG_WR(ser, regi_ser, rw_tr_ctrl, prev_tr_ctrl); -+ -+ spin_unlock_irqrestore(&port->lock, flags); -+} -+ -+static void transmit_chars_dma(struct uart_cris_port *up); -+ -+/* -+ * Do not spin_lock_irqsave or disable interrupts by other means here; it's -+ * already done by the caller. -+ */ -+ -+static void serial_cris_start_tx(struct uart_port *port) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ reg_scope_instances regi_ser = up->regi_ser; -+ reg_ser_rw_tr_ctrl tr_ctrl; -+ -+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); -+ tr_ctrl.stop = regk_ser_no; -+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); -+ if (!up->regi_dmaout) { -+ reg_ser_rw_intr_mask intr_mask = -+ REG_RD(ser, regi_ser, rw_intr_mask); -+ intr_mask.tr_rdy = regk_ser_yes; -+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); -+ } else { -+ /* -+ * We're called possibly to re-enable transmission after it -+ * has been disabled. If so, DMA needs to be re-enabled. -+ */ -+ reg_ser_rw_tr_dma_en tr_dma_en = { .en = 1 }; -+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); -+ transmit_chars_dma(up); -+ } -+} -+ -+/* -+ * This function handles both the DMA and non-DMA case by ordering the -+ * transmitter to stop of after the current character. We don't need to wait -+ * for any such character to be completely transmitted; we do that where it -+ * matters, like in serial_cris_set_termios. Don't busy-wait here; see -+ * Documentation/serial/driver: this function is called within -+ * spin_lock_irq{,save} and thus separate ones would be disastrous (when SMP). -+ * There's no documented need to set the txd pin to any particular value; -+ * break setting is controlled solely by serial_cris_break_ctl. -+ */ -+ -+static void serial_cris_stop_tx(struct uart_port *port) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ reg_scope_instances regi_ser = up->regi_ser; -+ reg_ser_rw_tr_ctrl tr_ctrl; -+ reg_ser_rw_intr_mask intr_mask; -+ reg_ser_rw_tr_dma_en tr_dma_en = {0}; -+ reg_ser_rw_xoff_clr xoff_clr = {0}; -+ -+ /* -+ * For the non-DMA case, we'd get a tr_rdy interrupt that we're not -+ * interested in as we're not transmitting any characters. For the -+ * DMA case, that interrupt is already turned off, but no reason to -+ * waste code on conditionals here. -+ */ -+ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); -+ intr_mask.tr_rdy = regk_ser_no; -+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); -+ -+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); -+ tr_ctrl.stop = 1; -+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); -+ -+ /* -+ * Always clear possible hardware xoff-detected state here, no need to -+ * unnecessary consider mctrl settings and when they change. We clear -+ * it here rather than in start_tx: both functions are called as the -+ * effect of XOFF processing, but start_tx is also called when upper -+ * levels tell the driver that there are more characters to send, so -+ * avoid adding code there. -+ */ -+ xoff_clr.clr = 1; -+ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr); -+ -+ /* -+ * Disable transmitter DMA, so that if we're in XON/XOFF, we can send -+ * those single characters without also giving go-ahead for queued up -+ * DMA data. -+ */ -+ tr_dma_en.en = 0; -+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); -+} -+ -+static void serial_cris_stop_rx(struct uart_port *port) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ reg_scope_instances regi_ser = up->regi_ser; -+ reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); -+ -+ rec_ctrl.en = regk_ser_no; -+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); -+} -+ -+static void serial_cris_enable_ms(struct uart_port *port) -+{ -+} -+ -+static void check_modem_status(struct uart_cris_port *up) -+{ -+} -+ -+static unsigned int serial_cris_tx_empty(struct uart_port *port) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ unsigned long flags; -+ unsigned int ret; -+ reg_ser_r_stat_din rstat = {0}; -+ -+ spin_lock_irqsave(&up->port.lock, flags); -+ if (up->regi_dmaout) { -+ /* -+ * For DMA, before looking at r_stat, we need to check that we -+ * either haven't actually started or that end-of-list is -+ * reached, else a tr_empty indication is just an internal -+ * state. The caller qualifies, if needed, that the -+ * port->info.xmit buffer is empty, so we don't need to -+ * check that. -+ */ -+ reg_dma_rw_stat status = REG_RD(dma, up->regi_dmaout, rw_stat); -+ -+ if (!up->tx_started) { -+ ret = 1; -+ goto done; -+ } -+ -+ if (status.list_state != regk_dma_data_at_eol) { -+ ret = 0; -+ goto done; -+ } -+ } -+ -+ rstat = REG_RD(ser, up->regi_ser, r_stat_din); -+ ret = rstat.tr_empty ? TIOCSER_TEMT : 0; -+ -+ done: -+ spin_unlock_irqrestore(&up->port.lock, flags); -+ return ret; -+} -+static unsigned int serial_cris_get_mctrl(struct uart_port *port) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ unsigned int ret; -+ -+ ret = 0; -+ if (crisv32_serial_get_rts(up)) -+ ret |= TIOCM_RTS; -+ if (crisv32_io_rd(&up->dtr_pin)) -+ ret |= TIOCM_DTR; -+ if (crisv32_io_rd(&up->cd_pin)) -+ ret |= TIOCM_CD; -+ if (crisv32_io_rd(&up->ri_pin)) -+ ret |= TIOCM_RI; -+ if (!crisv32_io_rd(&up->dsr_pin)) -+ ret |= TIOCM_DSR; -+ if (crisv32_serial_get_cts(up)) -+ ret |= TIOCM_CTS; -+ return ret; -+} -+ -+static void serial_cris_set_mctrl(struct uart_port *port, unsigned int mctrl) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ -+ crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0); -+ crisv32_io_set(&up->dtr_pin, mctrl & TIOCM_DTR ? 1 : 0); -+ crisv32_io_set(&up->ri_pin, mctrl & TIOCM_RNG ? 1 : 0); -+ crisv32_io_set(&up->cd_pin, mctrl & TIOCM_CD ? 1 : 0); -+} -+ -+static void serial_cris_break_ctl(struct uart_port *port, int break_state) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ unsigned long flags; -+ reg_ser_rw_tr_ctrl tr_ctrl; -+ reg_ser_rw_tr_dma_en tr_dma_en; -+ reg_ser_rw_intr_mask intr_mask; -+ -+ spin_lock_irqsave(&up->port.lock, flags); -+ tr_ctrl = REG_RD(ser, up->regi_ser, rw_tr_ctrl); -+ tr_dma_en = REG_RD(ser, up->regi_ser, rw_tr_dma_en); -+ intr_mask = REG_RD(ser, up->regi_ser, rw_intr_mask); -+ -+ if (break_state != 0) { /* Send break */ -+ /* -+ * We need to disable DMA (if used) or tr_rdy interrupts if no -+ * DMA. No need to make this conditional on use of DMA; -+ * disabling will be a no-op for the other mode. -+ */ -+ intr_mask.tr_rdy = regk_ser_no; -+ tr_dma_en.en = 0; -+ -+ /* -+ * Stop transmission and set the txd pin to 0 after the -+ * current character. The txd setting will take effect after -+ * any current transmission has completed. -+ */ -+ tr_ctrl.stop = 1; -+ tr_ctrl.txd = 0; -+ } else { -+ /* Re-enable either transmit DMA or the serial interrupt. */ -+ if (up->regi_dmaout) -+ tr_dma_en.en = 1; -+ else -+ intr_mask.tr_rdy = regk_ser_yes; -+ -+ -+ tr_ctrl.stop = 0; -+ tr_ctrl.txd = 1; -+ } -+ REG_WR(ser, up->regi_ser, rw_tr_ctrl, tr_ctrl); -+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en); -+ REG_WR(ser, up->regi_ser, rw_intr_mask, intr_mask); -+ -+ spin_unlock_irqrestore(&up->port.lock, flags); -+} -+ -+/* -+ * The output DMA channel is free - use it to send as many chars as -+ * possible. -+ */ -+ -+static void -+transmit_chars_dma(struct uart_cris_port *up) -+{ -+ struct dma_descr_data *descr, *pending_descr, *dmapos; -+ struct dma_descr_data *last_tx_descr; -+ struct circ_buf *xmit = &up->port.info->xmit; -+ unsigned int sentl = 0; -+ reg_dma_rw_ack_intr ack_intr = { .data = regk_dma_yes }; -+ reg_dma_rw_stat status; -+ reg_scope_instances regi_dmaout = up->regi_dmaout; -+ unsigned int chars_in_q; -+ unsigned int chars_to_send; -+ -+ /* Acknowledge dma data descriptor irq, if there was one. */ -+ REG_WR(dma, regi_dmaout, rw_ack_intr, ack_intr); -+ -+ /* -+ * First get the amount of bytes sent during the last DMA transfer, -+ * and update xmit accordingly. -+ */ -+ status = REG_RD(dma, regi_dmaout, rw_stat); -+ if (status.list_state == regk_dma_data_at_eol || !up->tx_started) -+ dmapos = phys_to_virt((int)up->last_tx_descr->next); -+ else -+ dmapos = phys_to_virt(REG_RD_INT(dma, regi_dmaout, rw_data)); -+ -+ pending_descr = up->first_tx_descr; -+ while (pending_descr != dmapos) { -+ sentl += pending_descr->after - pending_descr->buf; -+ pending_descr->after = pending_descr->buf = NULL; -+ pending_descr = phys_to_virt((int)pending_descr->next); -+ } -+ -+ up->first_tx_descr = pending_descr; -+ last_tx_descr = up->last_tx_descr; -+ -+ /* Update stats. */ -+ up->port.icount.tx += sentl; -+ -+ up->tx_pending_chars -= sentl; -+ -+ /* Update xmit buffer. */ -+ xmit->tail = (xmit->tail + sentl) & (UART_XMIT_SIZE - 1); -+ -+ /* -+ * Find out the largest amount of consecutive bytes we want to send -+ * now. -+ */ -+ chars_in_q = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); -+ -+ if (chars_in_q == 0) -+ /* Tell upper layers that we're now idle. */ -+ goto done; -+ -+ /* Some of those characters are actually pending output. */ -+ chars_to_send = chars_in_q - up->tx_pending_chars; -+ -+ /* -+ * Clamp the new number of pending chars to the advertised -+ * one. -+ */ -+ if (chars_to_send + up->tx_pending_chars > up->port.fifosize) -+ chars_to_send = up->port.fifosize - up->tx_pending_chars; -+ -+ /* If we don't want to send any, we're done. */ -+ if (chars_to_send == 0) -+ goto done; -+ -+ descr = phys_to_virt((int)last_tx_descr->next); -+ -+ /* -+ * We can't send anything if we could make the condition in -+ * the while-loop above (reaping finished descriptors) be met -+ * immediately before the first iteration. However, don't -+ * mistake the full state for the empty state. -+ */ -+ if ((descr == up->first_tx_descr && up->tx_pending_chars != 0) -+ || descr->next == up->first_tx_descr) -+ goto done; -+ -+ /* Set up the descriptor for output. */ -+ descr->buf = (void*)virt_to_phys(xmit->buf + xmit->tail -+ + up->tx_pending_chars); -+ descr->after = descr->buf + chars_to_send; -+ descr->eol = 1; -+ descr->out_eop = 0; -+ descr->intr = 1; -+ descr->wait = 0; -+ descr->in_eop = 0; -+ descr->md = 0; -+ /* -+ * Make sure GCC doesn't move this eol clear before the eol set -+ * above. -+ */ -+ barrier(); -+ last_tx_descr->eol = 0; -+ -+ up->last_tx_descr = descr; -+ up->tx_pending_chars += chars_to_send; -+ -+ if (!up->tx_started) { -+ up->tx_started = 1; -+ up->tr_context_descr.next = 0; -+ up->tr_context_descr.saved_data -+ = (dma_descr_data*)virt_to_phys(descr); -+ up->tr_context_descr.saved_data_buf = descr->buf; -+ DMA_START_CONTEXT(regi_dmaout, -+ virt_to_phys(&up->tr_context_descr)); -+ } else -+ DMA_CONTINUE_DATA(regi_dmaout); -+ -+ /* DMA is now running (hopefully). */ -+ -+ done: -+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) -+ uart_write_wakeup(&up->port); -+} -+ -+static void -+transmit_chars_no_dma(struct uart_cris_port *up) -+{ -+ int count; -+ struct circ_buf *xmit = &up->port.info->xmit; -+ -+ reg_scope_instances regi_ser = up->regi_ser; -+ reg_ser_r_stat_din rstat; -+ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes }; -+ -+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { -+ /* No more to send, so disable the interrupt. */ -+ reg_ser_rw_intr_mask intr_mask; -+ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); -+ intr_mask.tr_rdy = 0; -+ intr_mask.tr_empty = 0; -+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); -+ return; -+ } -+ -+ count = ETRAX_SER_FIFO_SIZE; -+ do { -+ reg_ser_rw_dout dout = { .data = xmit->buf[xmit->tail] }; -+ REG_WR(ser, regi_ser, rw_dout, dout); -+ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr); -+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); -+ up->port.icount.tx++; -+ if (xmit->head == xmit->tail) -+ break; -+ rstat = REG_RD(ser, regi_ser, r_stat_din); -+ } while ((--count > 0) && rstat.tr_rdy); -+ -+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) -+ uart_write_wakeup(&up->port); -+} /* transmit_chars_no_dma */ -+ -+static struct etrax_recv_buffer * -+alloc_recv_buffer(unsigned int size) -+{ -+ struct etrax_recv_buffer *buffer; -+ -+ if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC))) -+ panic("%s: Could not allocate %d bytes buffer\n", -+ __FUNCTION__, size); -+ -+ buffer->next = NULL; -+ buffer->length = 0; -+ buffer->error = TTY_NORMAL; -+ -+ return buffer; -+} -+ -+static void -+append_recv_buffer(struct uart_cris_port *up, -+ struct etrax_recv_buffer *buffer) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ if (!up->first_recv_buffer) -+ up->first_recv_buffer = buffer; -+ else -+ up->last_recv_buffer->next = buffer; -+ -+ up->last_recv_buffer = buffer; -+ -+ up->recv_cnt += buffer->length; -+ if (up->recv_cnt > up->max_recv_cnt) -+ up->max_recv_cnt = up->recv_cnt; -+ -+ local_irq_restore(flags); -+} -+ -+static int -+add_char_and_flag(struct uart_cris_port *up, unsigned char data, -+ unsigned char flag) -+{ -+ struct etrax_recv_buffer *buffer; -+ -+ buffer = alloc_recv_buffer(4); -+ buffer->length = 1; -+ buffer->error = flag; -+ buffer->buffer[0] = data; -+ -+ append_recv_buffer(up, buffer); -+ -+ up->port.icount.rx++; -+ -+ return 1; -+} -+ -+static void -+flush_to_flip_buffer(struct uart_cris_port *up) -+{ -+ struct tty_struct *tty; -+ struct etrax_recv_buffer *buffer; -+ -+ tty = up->port.info->tty; -+ if (!up->first_recv_buffer || !tty) -+ return; -+ -+ while ((buffer = up->first_recv_buffer)) { -+ unsigned int count = (unsigned int) -+ tty_insert_flip_string(tty, buffer->buffer, -+ buffer->length); -+ -+ up->recv_cnt -= count; -+ -+ if (count == buffer->length) { -+ up->first_recv_buffer = buffer->next; -+ kfree(buffer); -+ } else { -+ buffer->length -= count; -+ memmove(buffer->buffer, buffer->buffer + count, -+ buffer->length); -+ buffer->error = TTY_NORMAL; -+ } -+ } -+ -+ if (!up->first_recv_buffer) -+ up->last_recv_buffer = NULL; -+ -+ /* This call includes a check for low-latency. */ -+ tty_flip_buffer_push(tty); -+} -+ -+static unsigned int -+handle_descr_data(struct uart_cris_port *up, struct dma_descr_data *descr, -+ unsigned int recvl) -+{ -+ struct etrax_recv_buffer *buffer -+ = phys_to_virt((unsigned long)descr->buf) - sizeof *buffer; -+ -+ if (up->recv_cnt + recvl > 65536) { -+ printk(KERN_ERR "Too much pending incoming data on %s!" -+ " Dropping %u bytes.\n", up->port.info->tty->name, -+ recvl); -+ return 0; -+ } -+ -+ buffer->length = recvl; -+ -+ append_recv_buffer(up, buffer); -+ -+ flush_to_flip_buffer(up); -+ -+ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE); -+ descr->buf = (void*)virt_to_phys(buffer->buffer); -+ descr->after = descr->buf + SERIAL_DESCR_BUF_SIZE; -+ -+ return recvl; -+} -+ -+static unsigned int -+handle_all_descr_data(struct uart_cris_port *up) -+{ -+ struct dma_descr_data *descr -+ = &up->rec_descr[(up->cur_rec_descr - 1) -+ % SERIAL_RECV_DESCRIPTORS]; -+ struct dma_descr_data *prev_descr; -+ unsigned int recvl; -+ unsigned int ret = 0; -+ reg_scope_instances regi_dmain = up->regi_dmain; -+ -+ while (1) { -+ prev_descr = descr; -+ descr = &up->rec_descr[up->cur_rec_descr]; -+ -+ if (descr == phys_to_virt(REG_RD(dma, regi_dmain, rw_data))) -+ break; -+ -+ if (++up->cur_rec_descr == SERIAL_RECV_DESCRIPTORS) -+ up->cur_rec_descr = 0; -+ -+ /* Find out how many bytes were read. */ -+ recvl = descr->after - descr->buf; -+ -+ /* Update stats. */ -+ up->port.icount.rx += recvl; -+ -+ ret += handle_descr_data(up, descr, recvl); -+ descr->eol = 1; -+ /* -+ * Make sure GCC doesn't move this eol clear before the -+ * eol set above. -+ */ -+ barrier(); -+ prev_descr->eol = 0; -+ flush_dma_descr(descr,1); // Cache bug workaround -+ flush_dma_descr(prev_descr,0); // Cache bug workaround -+ } -+ -+ return ret; -+} -+ -+static void -+receive_chars_dma(struct uart_cris_port *up) -+{ -+ reg_ser_r_stat_din rstat; -+ reg_dma_rw_ack_intr ack_intr = {0}; -+ -+ /* Acknowledge both dma_descr and dma_eop irq. */ -+ ack_intr.data = 1; -+ ack_intr.in_eop = 1; -+ REG_WR(dma, up->regi_dmain, rw_ack_intr, ack_intr); -+ -+ handle_all_descr_data(up); -+ -+ /* Read the status register to detect errors. */ -+ rstat = REG_RD(ser, up->regi_ser, r_stat_din); -+ -+ if (rstat.framing_err | rstat.par_err | rstat.orun) { -+ /* -+ * If we got an error, we must reset it by reading the -+ * rs_stat_din register and put the data in buffer manually. -+ */ -+ reg_ser_rs_stat_din stat_din; -+ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din); -+ -+ if (stat_din.par_err) -+ add_char_and_flag(up, stat_din.data, TTY_PARITY); -+ else if (stat_din.orun) -+ add_char_and_flag(up, stat_din.data, TTY_OVERRUN); -+ else if (stat_din.framing_err) -+ add_char_and_flag(up, stat_din.data, TTY_FRAME); -+ } -+ -+ /* Restart the receiving DMA, in case it got stuck on an EOL. */ -+ DMA_CONTINUE_DATA(up->regi_dmain); -+} -+ -+void receive_chars_no_dma(struct uart_cris_port *up) -+{ -+ reg_ser_rs_stat_din stat_din; -+ reg_ser_r_stat_din rstat; -+ struct tty_struct *tty; -+ struct uart_icount *icount; -+ int max_count = 16; -+ char flag; -+ reg_ser_rw_ack_intr ack_intr = { 0 }; -+ -+ rstat = REG_RD(ser, up->regi_ser, r_stat_din); -+ up->last_rx_active_usec = GET_JIFFIES_USEC(); -+ up->last_rx_active = jiffies; -+ icount = &up->port.icount; -+ tty = up->port.info->tty; -+ -+ do { -+ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din); -+ -+ flag = TTY_NORMAL; -+ ack_intr.dav = 1; -+ REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr); -+ icount->rx++; -+ -+ if (stat_din.framing_err | stat_din.par_err | stat_din.orun) { -+ if (stat_din.data == 0x00 && -+ stat_din.framing_err) { -+ /* Most likely a break. */ -+ flag = TTY_BREAK; -+ icount->brk++; -+ } else if (stat_din.par_err) { -+ flag = TTY_PARITY; -+ icount->parity++; -+ } else if (stat_din.orun) { -+ flag = TTY_OVERRUN; -+ icount->overrun++; -+ } else if (stat_din.framing_err) { -+ flag = TTY_FRAME; -+ icount->frame++; -+ } -+ } -+ -+ /* -+ * If this becomes important, we probably *could* handle this -+ * gracefully by keeping track of the unhandled character. -+ */ -+ if (!tty_insert_flip_char(tty, stat_din.data, flag)) -+ panic("%s: No tty buffer space", __FUNCTION__); -+ rstat = REG_RD(ser, up->regi_ser, r_stat_din); -+ } while (rstat.dav && (max_count-- > 0)); -+ spin_unlock(&up->port.lock); -+ tty_flip_buffer_push(tty); -+ spin_lock(&up->port.lock); -+} /* receive_chars_no_dma */ -+ -+/* -+ * DMA output channel interrupt handler. -+ * this interrupt is called from DMA2(ser2), DMA8(ser3), DMA6(ser0) or -+ * DMA4(ser1) when they have finished a descriptor with the intr flag set. -+ */ -+ -+static irqreturn_t -+dma_tr_interrupt(int irq, void *dev_id, struct pt_regs * regs) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id; -+ reg_dma_r_masked_intr masked_intr; -+ reg_scope_instances regi_dmaout; -+ int handled = 0; -+ -+ spin_lock(&up->port.lock); -+ regi_dmaout = up->regi_dmaout; -+ if (!regi_dmaout) { -+ spin_unlock(&up->port.lock); -+ return IRQ_NONE; -+ } -+ -+ /* -+ * Check for dma_descr (don't need to check for dma_eop in -+ * output DMA for serial). -+ */ -+ masked_intr = REG_RD(dma, regi_dmaout, r_masked_intr); -+ -+ if (masked_intr.data) { -+ /* We can send a new dma bunch. make it so. */ -+ -+ /* -+ * Read jiffies_usec first. -+ * We want this time to be as late as possible. -+ */ -+ up->last_tx_active_usec = GET_JIFFIES_USEC(); -+ up->last_tx_active = jiffies; -+ transmit_chars_dma(up); -+ handled = 1; -+ } -+ check_modem_status(up); -+ spin_unlock(&up->port.lock); -+ return IRQ_RETVAL(handled); -+} -+ -+/* DMA input channel interrupt handler. */ -+ -+static irqreturn_t -+dma_rec_interrupt(int irq, void *dev_id, struct pt_regs * regs) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id; -+ reg_dma_r_masked_intr masked_intr; -+ reg_scope_instances regi_dmain; -+ int handled = 0; -+ -+ spin_lock(&up->port.lock); -+ regi_dmain = up->regi_dmain; -+ if (!regi_dmain) { -+ spin_unlock(&up->port.lock); -+ return IRQ_NONE; -+ } -+ -+ /* Check for both dma_eop and dma_descr for the input dma channel. */ -+ masked_intr = REG_RD(dma, regi_dmain, r_masked_intr); -+ if (masked_intr.data || masked_intr.in_eop) { -+ /* We have received something. */ -+ receive_chars_dma(up); -+ handled = 1; -+ } -+ check_modem_status(up); -+ spin_unlock(&up->port.lock); -+ return IRQ_RETVAL(handled); -+} -+ -+/* "Normal" serial port interrupt handler - both rx and tx. */ -+ -+static irqreturn_t -+ser_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id; -+ reg_scope_instances regi_ser; -+ int handled = 0; -+ -+ spin_lock(&up->port.lock); -+ if (up->regi_dmain && up->regi_dmaout) { -+ spin_unlock(&up->port.lock); -+ return IRQ_NONE; -+ } -+ -+ regi_ser = up->regi_ser; -+ -+ if (regi_ser) { -+ reg_ser_r_masked_intr masked_intr; -+ masked_intr = REG_RD(ser, regi_ser, r_masked_intr); -+ /* -+ * Check what interrupts are active before taking -+ * actions. If DMA is used the interrupt shouldn't -+ * be enabled. -+ */ -+ if (masked_intr.dav) { -+ receive_chars_no_dma(up); -+ handled = 1; -+ } -+ check_modem_status(up); -+ -+ if (masked_intr.tr_rdy) { -+ transmit_chars_no_dma(up); -+ handled = 1; -+ } -+ } -+ spin_unlock(&up->port.lock); -+ return IRQ_RETVAL(handled); -+} /* ser_interrupt */ -+ -+static int start_recv_dma(struct uart_cris_port *up) -+{ -+ struct dma_descr_data *descr = up->rec_descr; -+ struct etrax_recv_buffer *buffer; -+ int i; -+ -+ /* Set up the receiving descriptors. */ -+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { -+ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE); -+ descr[i].next = (void*)virt_to_phys(&descr[i+1]); -+ descr[i].buf = (void*)virt_to_phys(buffer->buffer); -+ descr[i].after = descr[i].buf + SERIAL_DESCR_BUF_SIZE; -+ descr[i].eol = 0; -+ descr[i].out_eop = 0; -+ descr[i].intr = 1; -+ descr[i].wait = 0; -+ descr[i].in_eop = 0; -+ descr[i].md = 0; -+ -+ } -+ -+ /* Link the last descriptor to the first. */ -+ descr[i-1].next = (void*)virt_to_phys(&descr[0]); -+ -+ /* And mark it as end of list. */ -+ descr[i-1].eol = 1; -+ -+ /* Start with the first descriptor in the list. */ -+ up->cur_rec_descr = 0; -+ up->rec_context_descr.next = 0; -+ up->rec_context_descr.saved_data -+ = (dma_descr_data *)virt_to_phys(&descr[up->cur_rec_descr]); -+ up->rec_context_descr.saved_data_buf = descr[up->cur_rec_descr].buf; -+ -+ /* Start the DMA. */ -+ DMA_START_CONTEXT(up->regi_dmain, -+ virt_to_phys(&up->rec_context_descr)); -+ -+ /* Input DMA should be running now. */ -+ return 1; -+} -+ -+ -+static void start_receive(struct uart_cris_port *up) -+{ -+ reg_scope_instances regi_dmain = up->regi_dmain; -+ if (regi_dmain) { -+ start_recv_dma(up); -+ } -+} -+ -+ -+static void start_transmitter(struct uart_cris_port *up) -+{ -+ int i; -+ reg_scope_instances regi_dmaout = up->regi_dmaout; -+ if (regi_dmaout) { -+ for (i = 0; i < SERIAL_TX_DESCRIPTORS; i++) { -+ memset(&up->tr_descr[i], 0, sizeof(up->tr_descr[i])); -+ up->tr_descr[i].eol = 1; -+ up->tr_descr[i].intr = 1; -+ up->tr_descr[i].next = (dma_descr_data *) -+ virt_to_phys(&up->tr_descr[i+1]); -+ } -+ up->tr_descr[i-1].next = (dma_descr_data *) -+ virt_to_phys(&up->tr_descr[0]); -+ up->first_tx_descr = &up->tr_descr[0]; -+ -+ /* -+ * We'll be counting up to up->last_tx_descr->next from -+ * up->first_tx_descr when starting DMA, so we should make -+ * them the same for the very first round. If instead we'd -+ * set last_tx_descr = first_tx_descr, we'd rely on -+ * accidentally working code and data as we'd take a pass over -+ * the first, unused, descriptor. -+ */ -+ up->last_tx_descr = &up->tr_descr[i-1]; -+ up->tx_started = 0; -+ up->tx_pending_chars = 0; -+ } -+} -+ -+static int serial_cris_startup(struct uart_port *port) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ unsigned long flags; -+ reg_intr_vect_rw_mask intr_mask; -+ reg_ser_rw_intr_mask ser_intr_mask = {0}; -+ reg_dma_rw_intr_mask dmain_intr_mask = {0}; -+ reg_dma_rw_intr_mask dmaout_intr_mask = {0}; -+ reg_dma_rw_cfg cfg = {.en = 1}; -+ reg_scope_instances regi_dma; -+ -+ spin_lock_irqsave(&up->port.lock, flags); -+ -+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); -+ -+ dmain_intr_mask.data = dmain_intr_mask.in_eop = regk_dma_yes; -+ dmaout_intr_mask.data = regk_dma_yes; -+ if (!up->regi_dmain) -+ ser_intr_mask.dav = regk_ser_yes; -+ -+ if (port->line == 0) { -+ if (request_irq(SER0_INTR_VECT, ser_interrupt, -+ IRQF_SHARED | IRQF_DISABLED, "ser0", -+ &serial_cris_ports[0])) -+ panic("irq ser0"); -+ /* Enable the ser0 irq in global config. */ -+ intr_mask.ser0 = 1; -+ /* Port ser0 can use dma6 for tx and dma7 for rx. */ -+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT -+ if (request_irq(DMA6_INTR_VECT, dma_tr_interrupt, -+ IRQF_DISABLED, "serial 0 dma tr", -+ &serial_cris_ports[0])) -+ panic("irq ser0txdma"); -+ crisv32_request_dma(6, "ser0", DMA_PANIC_ON_ERROR, 0, -+ dma_ser0); -+ /* Enable the dma6 irq in global config. */ -+ intr_mask.dma6 = 1; -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN -+ if (request_irq(DMA7_INTR_VECT, dma_rec_interrupt, -+ IRQF_DISABLED, "serial 0 dma rec", -+ &serial_cris_ports[0])) -+ panic("irq ser0rxdma"); -+ crisv32_request_dma(7, "ser0", DMA_PANIC_ON_ERROR, 0, -+ dma_ser0); -+ /* Enable the dma7 irq in global config. */ -+ intr_mask.dma7 = 1; -+#endif -+ } else if (port->line == 1) { -+ if (request_irq(SER1_INTR_VECT, ser_interrupt, -+ IRQF_SHARED | IRQF_DISABLED, "ser1", -+ &serial_cris_ports[1])) -+ panic("irq ser1"); -+ /* Enable the ser1 irq in global config. */ -+ intr_mask.ser1 = 1; -+ -+ /* Port ser1 can use dma4 for tx and dma5 for rx. */ -+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT -+ if (request_irq(DMA4_INTR_VECT, dma_tr_interrupt, -+ IRQF_DISABLED, "serial 1 dma tr", -+ &serial_cris_ports[1])) -+ panic("irq ser1txdma"); -+ crisv32_request_dma(4, "ser1", DMA_PANIC_ON_ERROR, 0, -+ dma_ser1); -+ /* Enable the dma4 irq in global config. */ -+ intr_mask.dma4 = 1; -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN -+ if (request_irq(DMA5_INTR_VECT, dma_rec_interrupt, -+ IRQF_DISABLED, "serial 1 dma rec", -+ &serial_cris_ports[1])) -+ panic("irq ser1rxdma"); -+ crisv32_request_dma(5, "ser1", DMA_PANIC_ON_ERROR, 0, -+ dma_ser1); -+ /* Enable the dma5 irq in global config. */ -+ intr_mask.dma5 = 1; -+#endif -+ } else if (port->line == 2) { -+ if (request_irq(SER2_INTR_VECT, ser_interrupt, -+ IRQF_SHARED | IRQF_DISABLED, "ser2", -+ &serial_cris_ports[2])) -+ panic("irq ser2"); -+ /* Enable the ser2 irq in global config. */ -+ intr_mask.ser2 = 1; -+ -+ /* Port ser2 can use dma2 for tx and dma3 for rx. */ -+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT -+ if (request_irq(DMA2_INTR_VECT, dma_tr_interrupt, -+ IRQF_DISABLED, "serial 2 dma tr", -+ &serial_cris_ports[2])) -+ panic("irq ser2txdma"); -+ crisv32_request_dma(2, "ser2", DMA_PANIC_ON_ERROR, 0, -+ dma_ser2); -+ /* Enable the dma2 irq in global config. */ -+ intr_mask.dma2 = 1; -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN -+ if (request_irq(DMA3_INTR_VECT, dma_rec_interrupt, -+ IRQF_DISABLED, "serial 2 dma rec", -+ &serial_cris_ports[2])) -+ panic("irq ser2rxdma"); -+ crisv32_request_dma(3, "ser2", DMA_PANIC_ON_ERROR, 0, -+ dma_ser2); -+ /* Enable the dma3 irq in global config. */ -+ intr_mask.dma3 = 1; -+#endif -+ } else if (port->line == 3) { -+ if (request_irq(SER3_INTR_VECT, ser_interrupt, -+ IRQF_SHARED | IRQF_DISABLED, "ser3", -+ &serial_cris_ports[3])) -+ panic("irq ser3" ); -+ /* Enable the ser3 irq in global config. */ -+ intr_mask.ser3 = 1; -+ -+ /* Port ser3 can use dma8 for tx and dma9 for rx. */ -+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT -+ if (request_irq(DMA8_INTR_VECT, dma_tr_interrupt, -+ IRQF_DISABLED, "serial 3 dma tr", -+ &serial_cris_ports[3])) -+ panic("irq ser3txdma"); -+ crisv32_request_dma(8, "ser3", DMA_PANIC_ON_ERROR, 0, -+ dma_ser3); -+ /* Enable the dma2 irq in global config. */ -+ intr_mask.dma8 = 1; -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN -+ if (request_irq(DMA9_INTR_VECT, dma_rec_interrupt, -+ IRQF_DISABLED, "serial 3 dma rec", -+ &serial_cris_ports[3])) -+ panic("irq ser3rxdma"); -+ crisv32_request_dma(9, "ser3", DMA_PANIC_ON_ERROR, 0, -+ dma_ser3); -+ /* Enable the dma3 irq in global config. */ -+ intr_mask.dma9 = 1; -+#endif -+ } -+ -+ /* -+ * Reset the DMA channels and make sure their interrupts are cleared. -+ */ -+ -+ regi_dma = up->regi_dmain; -+ if (regi_dma) { -+ reg_dma_rw_ack_intr ack_intr = { 0 }; -+ DMA_RESET(regi_dma); -+ /* Wait until reset cycle is complete. */ -+ DMA_WAIT_UNTIL_RESET(regi_dma); -+ REG_WR(dma, regi_dma, rw_cfg, cfg); -+ /* Make sure the irqs are cleared. */ -+ ack_intr.group = 1; -+ ack_intr.ctxt = 1; -+ ack_intr.data = 1; -+ ack_intr.in_eop = 1; -+ ack_intr.stream_cmd = 1; -+ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr); -+ } -+ regi_dma = up->regi_dmaout; -+ if (regi_dma) { -+ reg_dma_rw_ack_intr ack_intr = { 0 }; -+ DMA_RESET(regi_dma); -+ /* Wait until reset cycle is complete. */ -+ DMA_WAIT_UNTIL_RESET(regi_dma); -+ REG_WR(dma, regi_dma, rw_cfg, cfg); -+ /* Make sure the irqs are cleared. */ -+ ack_intr.group = 1; -+ ack_intr.ctxt = 1; -+ ack_intr.data = 1; -+ ack_intr.in_eop = 1; -+ ack_intr.stream_cmd = 1; -+ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr); -+ } -+ -+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); -+ REG_WR(ser, up->regi_ser, rw_intr_mask, ser_intr_mask); -+ if (up->regi_dmain) -+ REG_WR(dma, up->regi_dmain, rw_intr_mask, dmain_intr_mask); -+ if (up->regi_dmaout) -+ REG_WR(dma, up->regi_dmaout, rw_intr_mask, dmaout_intr_mask); -+ -+ start_receive(up); -+ start_transmitter(up); -+ -+ serial_cris_set_mctrl(&up->port, up->port.mctrl); -+ spin_unlock_irqrestore(&up->port.lock, flags); -+ -+ return 0; -+} -+ -+static void serial_cris_shutdown(struct uart_port *port) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ unsigned long flags; -+ reg_intr_vect_rw_mask intr_mask; -+ -+ spin_lock_irqsave(&up->port.lock, flags); -+ -+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); -+ serial_cris_stop_tx(port); -+ serial_cris_stop_rx(port); -+ -+ if (port->line == 0) { -+ intr_mask.ser0 = 0; -+ free_irq(SER0_INTR_VECT, &serial_cris_ports[0]); -+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT -+ intr_mask.dma6 = 0; -+ crisv32_free_dma(6); -+ free_irq(DMA6_INTR_VECT, &serial_cris_ports[0]); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN -+ intr_mask.dma7 = 0; -+ crisv32_free_dma(7); -+ free_irq(DMA7_INTR_VECT, &serial_cris_ports[0]); -+#endif -+ } else if (port->line == 1) { -+ intr_mask.ser1 = 0; -+ free_irq(SER1_INTR_VECT, &serial_cris_ports[1]); -+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT -+ intr_mask.dma4 = 0; -+ crisv32_free_dma(4); -+ free_irq(DMA4_INTR_VECT, &serial_cris_ports[1]); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN -+ intr_mask.dma5 = 0; -+ crisv32_free_dma(5); -+ free_irq(DMA5_INTR_VECT, &serial_cris_ports[1]); -+#endif -+ } else if (port->line == 2) { -+ intr_mask.ser2 = 0; -+ free_irq(SER2_INTR_VECT, &serial_cris_ports[2]); -+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT -+ intr_mask.dma2 = 0; -+ crisv32_free_dma(2); -+ free_irq(DMA2_INTR_VECT, &serial_cris_ports[2]); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN -+ intr_mask.dma3 = 0; -+ crisv32_free_dma(3); -+ free_irq(DMA3_INTR_VECT, &serial_cris_ports[2]); -+#endif -+ } else if (port->line == 3) { -+ intr_mask.ser3 = 0; -+ free_irq(SER3_INTR_VECT, &serial_cris_ports[3]); -+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT -+ intr_mask.dma8 = 0; -+ crisv32_free_dma(8); -+ free_irq(DMA8_INTR_VECT, &serial_cris_ports[3]); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN -+ intr_mask.dma9 = 0; -+ crisv32_free_dma(9); -+ free_irq(DMA9_INTR_VECT, &serial_cris_ports[3]); -+#endif -+ } -+ -+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); -+ -+ serial_cris_set_mctrl(&up->port, up->port.mctrl); -+ -+ if (up->regi_dmain) { -+ struct etrax_recv_buffer *rb; -+ struct etrax_recv_buffer *rb_next; -+ int i; -+ struct dma_descr_data *descr; -+ -+ /* -+ * In case of DMA and receive errors, there might be pending -+ * receive buffers still linked here and not flushed upwards. -+ * Release them. -+ */ -+ for (rb = up->first_recv_buffer; rb != NULL; rb = rb_next) { -+ rb_next = rb->next; -+ kfree (rb); -+ } -+ up->first_recv_buffer = NULL; -+ up->last_recv_buffer = NULL; -+ -+ /* -+ * Also release buffers that were attached to the DMA -+ * before we shut down the hardware above. -+ */ -+ for (i = 0, descr = up->rec_descr; -+ i < SERIAL_RECV_DESCRIPTORS; -+ i++) -+ if (descr[i].buf) { -+ rb = phys_to_virt((u32) descr[i].buf) -+ - sizeof *rb; -+ kfree(rb); -+ descr[i].buf = NULL; -+ } -+ } -+ -+ spin_unlock_irqrestore(&up->port.lock, flags); -+ -+} -+ -+static void -+serial_cris_set_termios(struct uart_port *port, struct termios *termios, -+ struct termios *old) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ unsigned long flags; -+ reg_ser_rw_xoff xoff; -+ reg_ser_rw_xoff_clr xoff_clr = {0}; -+ reg_ser_rw_tr_ctrl tx_ctrl = {0}; -+ reg_ser_rw_tr_dma_en tx_dma_en = {0}; -+ reg_ser_rw_rec_ctrl rx_ctrl = {0}; -+ reg_ser_rw_tr_baud_div tx_baud_div = {0}; -+ reg_ser_rw_rec_baud_div rx_baud_div = {0}; -+ reg_ser_r_stat_din rstat; -+ int baud; -+ -+ if (old && -+ termios->c_cflag == old->c_cflag && -+ termios->c_iflag == old->c_iflag) -+ return; -+ -+ /* Start with default settings and then fill in changes. */ -+ -+ /* Tx: 8 bit, no/even parity, 1 stop bit, no cts. */ -+ tx_ctrl.base_freq = regk_ser_f29_493; -+ tx_ctrl.en = 0; -+ tx_ctrl.stop = 0; -+#ifdef CONFIG_ETRAX_RS485 -+ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) { -+ tx_ctrl.auto_rts = regk_ser_yes; -+ } else -+#endif -+ tx_ctrl.auto_rts = regk_ser_no; -+ tx_ctrl.txd = 1; -+ tx_ctrl.auto_cts = 0; -+ /* Rx: 8 bit, no/even parity. */ -+ if (up->regi_dmain) { -+ rx_ctrl.dma_mode = 1; -+ rx_ctrl.auto_eop = 1; -+ } -+ rx_ctrl.dma_err = regk_ser_stop; -+ rx_ctrl.sampling = regk_ser_majority; -+ rx_ctrl.timeout = 1; -+ -+#ifdef CONFIG_ETRAX_RS485 -+ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) { -+# ifdef CONFIG_ETRAX_RS485_DISABLE_RECEIVER -+ rx_ctrl.half_duplex = regk_ser_yes; -+# endif -+ rx_ctrl.rts_n = up->rs485.rts_after_sent ? -+ regk_ser_active : regk_ser_inactive; -+ } else if (up->port_type == TYPE_485FD) { -+ rx_ctrl.rts_n = regk_ser_active; -+ } else -+#endif -+ rx_ctrl.rts_n = regk_ser_inactive; -+ -+ /* Common for tx and rx: 8N1. */ -+ tx_ctrl.data_bits = regk_ser_bits8; -+ rx_ctrl.data_bits = regk_ser_bits8; -+ tx_ctrl.par = regk_ser_even; -+ rx_ctrl.par = regk_ser_even; -+ tx_ctrl.par_en = regk_ser_no; -+ rx_ctrl.par_en = regk_ser_no; -+ -+ tx_ctrl.stop_bits = regk_ser_bits1; -+ -+ -+ /* Change baud-rate and write it to the hardware. */ -+ -+ /* baud_clock = base_freq / (divisor*8) -+ * divisor = base_freq / (baud_clock * 8) -+ * base_freq is either: -+ * off, ext, 29.493MHz, 32.000 MHz, 32.768 MHz or 100 MHz -+ * 20.493MHz is used for standard baudrates -+ */ -+ -+ /* -+ * For the console port we keep the original baudrate here. Not very -+ * beautiful. -+ */ -+ if ((port != console_port) || old) -+ baud = uart_get_baud_rate(port, termios, old, 0, -+ port->uartclk / 8); -+ else -+ baud = console_baud; -+ -+ tx_baud_div.div = 29493000 / (8 * baud); -+ /* Rx uses same as tx. */ -+ rx_baud_div.div = tx_baud_div.div; -+ rx_ctrl.base_freq = tx_ctrl.base_freq; -+ -+ if ((termios->c_cflag & CSIZE) == CS7) { -+ /* Set 7 bit mode. */ -+ tx_ctrl.data_bits = regk_ser_bits7; -+ rx_ctrl.data_bits = regk_ser_bits7; -+ } -+ -+ if (termios->c_cflag & CSTOPB) { -+ /* Set 2 stop bit mode. */ -+ tx_ctrl.stop_bits = regk_ser_bits2; -+ } -+ -+ if (termios->c_cflag & PARENB) { -+ /* Enable parity. */ -+ tx_ctrl.par_en = regk_ser_yes; -+ rx_ctrl.par_en = regk_ser_yes; -+ } -+ -+ if (termios->c_cflag & CMSPAR) { -+ if (termios->c_cflag & PARODD) { -+ /* Set mark parity if PARODD and CMSPAR. */ -+ tx_ctrl.par = regk_ser_mark; -+ rx_ctrl.par = regk_ser_mark; -+ } else { -+ tx_ctrl.par = regk_ser_space; -+ rx_ctrl.par = regk_ser_space; -+ } -+ } else { -+ if (termios->c_cflag & PARODD) { -+ /* Set odd parity. */ -+ tx_ctrl.par = regk_ser_odd; -+ rx_ctrl.par = regk_ser_odd; -+ } -+ } -+ -+ if (termios->c_cflag & CRTSCTS) { -+ /* Enable automatic CTS handling. */ -+ tx_ctrl.auto_cts = regk_ser_yes; -+ } -+ -+ /* Make sure the tx and rx are enabled. */ -+ tx_ctrl.en = regk_ser_yes; -+ rx_ctrl.en = regk_ser_yes; -+ -+ /* -+ * Wait for tr_idle in case a character is being output, so it won't -+ * be damaged by the changes we do below. It seems the termios -+ * changes "sometimes" (we can't see e.g. a tcsetattr TCSANOW -+ * parameter here) should take place no matter what state. However, -+ * in case we should wait, we may have a non-empty transmitter state -+ * as we tell the upper layers that we're all done when we've passed -+ * characters to the hardware, but we don't wait for them being -+ * actually shifted out. -+ */ -+ spin_lock_irqsave(&port->lock, flags); -+ -+ /* -+ * None of our interrupts re-enable DMA, so it's thankfully ok to -+ * disable it once, outside the loop. -+ */ -+ tx_dma_en.en = 0; -+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en); -+ do { -+ /* -+ * Make sure we have integrity between the read r_stat status -+ * and us writing the registers below, but don't busy-wait -+ * with interrupts off. We need to keep the port lock though -+ * (if we go SMP), so nobody else writes characters. -+ */ -+ local_irq_restore(flags); -+ local_irq_save(flags); -+ rstat = REG_RD(ser, up->regi_ser, r_stat_din); -+ } while (!rstat.tr_idle); -+ -+ /* Actually write the control regs (if modified) to the hardware. */ -+ -+ uart_update_timeout(port, termios->c_cflag, port->uartclk/8); -+ MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div); -+ MODIFY_REG(up->regi_ser, rw_rec_ctrl, rx_ctrl); -+ -+ MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div); -+ MODIFY_REG(up->regi_ser, rw_tr_ctrl, tx_ctrl); -+ -+ tx_dma_en.en = up->regi_dmaout != 0; -+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en); -+ -+ xoff = REG_RD(ser, up->regi_ser, rw_xoff); -+ -+ if (up->port.info && (up->port.info->tty->termios->c_iflag & IXON)) { -+ xoff.chr = STOP_CHAR(up->port.info->tty); -+ xoff.automatic = regk_ser_yes; -+ } else -+ xoff.automatic = regk_ser_no; -+ -+ MODIFY_REG(up->regi_ser, rw_xoff, xoff); -+ -+ /* -+ * Make sure we don't start in an automatically shut-off state due to -+ * a previous early exit. -+ */ -+ xoff_clr.clr = 1; -+ REG_WR(ser, up->regi_ser, rw_xoff_clr, xoff_clr); -+ -+ serial_cris_set_mctrl(&up->port, up->port.mctrl); -+ spin_unlock_irqrestore(&up->port.lock, flags); -+} -+ -+static const char * -+serial_cris_type(struct uart_port *port) -+{ -+ return "CRISv32"; -+} -+ -+static void serial_cris_release_port(struct uart_port *port) -+{ -+} -+ -+static int serial_cris_request_port(struct uart_port *port) -+{ -+ return 0; -+} -+ -+static void serial_cris_config_port(struct uart_port *port, int flags) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ up->port.type = PORT_CRIS; -+} -+ -+#if defined(CONFIG_ETRAX_RS485) -+ -+static void cris_set_rs485_mode(struct uart_cris_port* up) { -+ reg_ser_rw_tr_ctrl tr_ctrl; -+ reg_ser_rw_rec_ctrl rec_ctrl; -+ reg_scope_instances regi_ser = up->regi_ser; -+ -+ if (up->port_type == TYPE_485FD) -+ /* We do not want to change anything if we are in 485FD mode */ -+ return; -+ -+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); -+ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); -+ -+ /* Set port in RS-485 mode */ -+ if (up->rs485.enabled) { -+ tr_ctrl.auto_rts = regk_ser_yes; -+ rec_ctrl.rts_n = up->rs485.rts_after_sent ? -+ regk_ser_active : regk_ser_inactive; -+#ifdef CONFIG_ETRAX_RS485_DISABLE_RECEIVER -+ rec_ctrl.half_duplex = regk_ser_yes; -+#endif -+ } -+ /* Set port to RS-232 mode */ -+ else { -+ rec_ctrl.rts_n = regk_ser_inactive; -+ tr_ctrl.auto_rts = regk_ser_no; -+ rec_ctrl.half_duplex = regk_ser_no; -+ } -+ -+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); -+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); -+} -+ -+/* Enable/disable RS-485 mode on selected port. */ -+static int -+cris_enable_rs485(struct uart_cris_port* up, struct rs485_control *r) -+{ -+ if (up->port_type == TYPE_485FD) -+ /* Port in 485FD mode can not chage mode */ -+ goto out; -+ -+ up->rs485.enabled = 0x1 & r->enabled; -+ up->rs485.rts_on_send = 0x01 & r->rts_on_send; -+ up->rs485.rts_after_sent = 0x01 & r->rts_after_sent; -+ up->rs485.delay_rts_before_send = r->delay_rts_before_send; -+ -+ cris_set_rs485_mode(up); -+ out: -+ return 0; -+} -+ -+ -+/* Enable RS485 mode on port and send the data. Port will stay -+ * in 485 mode after the data has been sent. -+ */ -+static int -+cris_write_rs485(struct uart_cris_port* up, const unsigned char *buf, -+ int count) -+{ -+ up->rs485.enabled = 1; -+ -+ /* Set the port in RS485 mode */ -+ cris_set_rs485_mode(up); -+ -+ /* Send the data */ -+ count = serial_cris_driver.tty_driver->write(up->port.info->tty, buf, count); -+ -+ return count; -+} -+ -+#endif /* CONFIG_ETRAX_RS485 */ -+ -+static int serial_cris_ioctl(struct uart_port *port, unsigned int cmd, -+ unsigned long arg) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ -+ switch (cmd) { -+#if defined(CONFIG_ETRAX_RS485) -+ case TIOCSERSETRS485: { -+ struct rs485_control rs485ctrl; -+ if (copy_from_user(&rs485ctrl, (struct rs485_control*) arg, -+ sizeof(rs485ctrl))) -+ return -EFAULT; -+ -+ return cris_enable_rs485(up, &rs485ctrl); -+ } -+ -+ case TIOCSERWRRS485: { -+ struct rs485_write rs485wr; -+ if (copy_from_user(&rs485wr, (struct rs485_write*)arg, -+ sizeof(rs485wr))) -+ return -EFAULT; -+ -+ return cris_write_rs485(up, rs485wr.outc, rs485wr.outc_size); -+ } -+#endif -+ default: -+ return -ENOIOCTLCMD; -+ } -+ -+ return 0; -+} -+ -+static const struct uart_ops serial_cris_pops = { -+ .tx_empty = serial_cris_tx_empty, -+ .set_mctrl = serial_cris_set_mctrl, -+ .get_mctrl = serial_cris_get_mctrl, -+ .stop_tx = serial_cris_stop_tx, -+ .start_tx = serial_cris_start_tx, -+ .send_xchar = serial_cris_send_xchar, -+ .stop_rx = serial_cris_stop_rx, -+ .enable_ms = serial_cris_enable_ms, -+ .break_ctl = serial_cris_break_ctl, -+ .startup = serial_cris_startup, -+ .shutdown = serial_cris_shutdown, -+ .set_termios = serial_cris_set_termios, -+ .type = serial_cris_type, -+ .release_port = serial_cris_release_port, -+ .request_port = serial_cris_request_port, -+ .config_port = serial_cris_config_port, -+ .ioctl = serial_cris_ioctl, -+}; -+ -+/* -+ * It's too easy to break CONFIG_ETRAX_DEBUG_PORT_NULL and the -+ * no-config choices by adding and moving code to before a necessary -+ * early exit in all functions for the special case of -+ * up->regi_ser == 0. This collection of dummy functions lets us -+ * avoid that. Maybe there should be a generic table of dummy serial -+ * functions? -+ */ -+ -+static unsigned int serial_cris_tx_empty_dummy(struct uart_port *port) -+{ -+ return TIOCSER_TEMT; -+} -+ -+static void serial_cris_set_mctrl_dummy(struct uart_port *port, -+ unsigned int mctrl) -+{ -+} -+ -+static unsigned int serial_cris_get_mctrl_dummy(struct uart_port *port) -+{ -+ return 0; -+} -+ -+static void serial_cris_stop_tx_dummy(struct uart_port *port) -+{ -+} -+ -+static void serial_cris_start_tx_dummy(struct uart_port *port) -+{ -+ /* Discard outbound characters. */ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ struct circ_buf *xmit = &up->port.info->xmit; -+ xmit->tail = xmit->head; -+ uart_write_wakeup(port); -+} -+ -+#define serial_cris_stop_rx_dummy serial_cris_stop_tx_dummy -+ -+#define serial_cris_enable_ms_dummy serial_cris_stop_tx_dummy -+ -+static void serial_cris_break_ctl_dummy(struct uart_port *port, -+ int break_state) -+{ -+} -+ -+static int serial_cris_startup_dummy(struct uart_port *port) -+{ -+ return 0; -+} -+ -+#define serial_cris_shutdown_dummy serial_cris_stop_tx_dummy -+ -+static void -+serial_cris_set_termios_dummy(struct uart_port *port, struct termios *termios, -+ struct termios *old) -+{ -+} -+ -+#define serial_cris_release_port_dummy serial_cris_stop_tx_dummy -+#define serial_cris_request_port_dummy serial_cris_startup_dummy -+ -+static const struct uart_ops serial_cris_dummy_pops = { -+ /* -+ * We *could* save one or two of those with different -+ * signature by casting and knowledge of the ABI, but it's -+ * just not worth the maintenance headache. -+ * For the ones we don't define here, the default (usually meaning -+ * "unimplemented") makes sense. -+ */ -+ .tx_empty = serial_cris_tx_empty_dummy, -+ .set_mctrl = serial_cris_set_mctrl_dummy, -+ .get_mctrl = serial_cris_get_mctrl_dummy, -+ .stop_tx = serial_cris_stop_tx_dummy, -+ .start_tx = serial_cris_start_tx_dummy, -+ .stop_rx = serial_cris_stop_rx_dummy, -+ .enable_ms = serial_cris_enable_ms_dummy, -+ .break_ctl = serial_cris_break_ctl_dummy, -+ .startup = serial_cris_startup_dummy, -+ .shutdown = serial_cris_shutdown_dummy, -+ .set_termios = serial_cris_set_termios_dummy, -+ -+ /* This one we keep the same. */ -+ .type = serial_cris_type, -+ -+ .release_port = serial_cris_release_port_dummy, -+ .request_port = serial_cris_request_port_dummy, -+ -+ /* -+ * This one we keep the same too, as long as it doesn't do -+ * anything else but to set the type. -+ */ -+ .config_port = serial_cris_config_port, -+}; -+ -+static void cris_serial_port_init(struct uart_port *port, int line) -+{ -+ struct uart_cris_port *up = (struct uart_cris_port *)port; -+ static int first = 1; -+ -+ if (up->initialized) -+ return; -+ up->initialized = 1; -+ port->line = line; -+ spin_lock_init(&port->lock); -+ port->ops = -+ up->regi_ser == 0 ? &serial_cris_dummy_pops : -+ &serial_cris_pops; -+ port->irq = up->irq; -+ port->iobase = up->regi_ser ? up->regi_ser : 1; -+ port->uartclk = 29493000; -+ -+ /* -+ * We can't fit any more than 255 here (unsigned char), though -+ * actually UART_XMIT_SIZE characters could be pending output (if it -+ * wasn't for the single test in transmit_chars_dma). At time of this -+ * writing, the definition of "fifosize" is here the amount of -+ * characters that can be pending output after a start_tx call until -+ * tx_empty returns 1: see serial_core.c:uart_wait_until_sent. This -+ * matters for timeout calculations unfortunately, but keeping larger -+ * amounts at the DMA wouldn't win much so let's just play nice. -+ */ -+ port->fifosize = 255; -+ port->flags = UPF_BOOT_AUTOCONF; -+ -+#ifdef CONFIG_ETRAX_RS485 -+ /* Set sane defaults. */ -+ up->rs485.rts_on_send = 0; -+ up->rs485.rts_after_sent = 1; -+ up->rs485.delay_rts_before_send = 0; -+ if (up->port_type > TYPE_232) -+ up->rs485.enabled = 1; -+ else -+ up->rs485.enabled = 0; -+#endif -+ -+ if (first) { -+ first = 0; -+#ifdef CONFIG_ETRAX_SERIAL_PORT0 -+ SETUP_PINS(0); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT1 -+ SETUP_PINS(1); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT2 -+ SETUP_PINS(2); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT3 -+ SETUP_PINS(3); -+#endif -+ } -+} -+ -+static int __init serial_cris_init(void) -+{ -+ int ret, i; -+ reg_ser_rw_rec_ctrl rec_ctrl; -+ printk(KERN_INFO "Serial: CRISv32 driver $Revision: 1.78 $ "); -+ -+ ret = uart_register_driver(&serial_cris_driver); -+ if (ret) -+ goto out; -+ -+ for (i = 0; i < UART_NR; i++) { -+ if (serial_cris_ports[i].used) { -+#ifdef CONFIG_ETRAX_RS485 -+ /* Make sure that the RTS pin stays low when allocating -+ * pins for a port in 485 mode. -+ */ -+ if (serial_cris_ports[i].port_type > TYPE_232) { -+ rec_ctrl = REG_RD(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl); -+ rec_ctrl.rts_n = regk_ser_active; -+ REG_WR(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl, rec_ctrl); -+ } -+#endif -+ switch (serial_cris_ports[i].regi_ser) { -+ case regi_ser1: -+ if (crisv32_pinmux_alloc_fixed(pinmux_ser1)) { -+ printk("Failed to allocate pins for ser1, disable port\n"); -+ serial_cris_ports[i].used = 0; -+ continue; -+ } -+ break; -+ case regi_ser2: -+ if (crisv32_pinmux_alloc_fixed(pinmux_ser2)) { -+ printk("Failed to allocate pins for ser2, disable port\n"); -+ serial_cris_ports[i].used = 0; -+ continue; -+ } -+ break; -+ case regi_ser3: -+ if (crisv32_pinmux_alloc_fixed(pinmux_ser3)) { -+ printk("Failed to allocate pins for ser3, disable port\n"); -+ serial_cris_ports[i].used = 0; -+ continue; -+ } -+ break; -+ } -+ -+ struct uart_port *port = &serial_cris_ports[i].port; -+ cris_console.index = i; -+ cris_serial_port_init(port, i); -+ uart_add_one_port(&serial_cris_driver, port); -+ } -+ } -+ -+out: -+ return ret; -+} -+ -+static void __exit serial_cris_exit(void) -+{ -+ int i; -+ for (i = 0; i < UART_NR; i++) -+ if (serial_cris_ports[i].used) { -+ switch (serial_cris_ports[i].regi_ser) { -+ case regi_ser1: -+ crisv32_pinmux_dealloc_fixed(pinmux_ser1); -+ break; -+ case regi_ser2: -+ crisv32_pinmux_dealloc_fixed(pinmux_ser2); -+ break; -+ case regi_ser3: -+ crisv32_pinmux_dealloc_fixed(pinmux_ser3); -+ break; -+ } -+ uart_remove_one_port(&serial_cris_driver, -+ &serial_cris_ports[i].port); -+ } -+ uart_unregister_driver(&serial_cris_driver); -+} -+ -+module_init(serial_cris_init); -+module_exit(serial_cris_exit); ---- linux-2.6.19.2.orig/drivers/usb/host/hc_crisv10.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.c 2007-02-26 20:58:29.000000000 +0100 -@@ -1,219 +1,51 @@ - /* -- * usb-host.c: ETRAX 100LX USB Host Controller Driver (HCD) - * -- * Copyright (c) 2002, 2003 Axis Communications AB. -+ * ETRAX 100LX USB Host Controller Driver -+ * -+ * Copyright (C) 2005, 2006 Axis Communications AB -+ * -+ * Author: Konrad Eriksson -+ * - */ - -+#include - #include --#include --#include --#include --#include --#include --#include --#include - #include --#include -+#include - #include -+#include -+#include - --#include - #include - #include --#include --#include --#include -+#include -+#include - --#include --/* Ugly include because we don't live with the other host drivers. */ --#include <../drivers/usb/core/hcd.h> --#include <../drivers/usb/core/usb.h> -- --#include "hc_crisv10.h" -+#include "../core/hcd.h" -+#include "../core/hub.h" -+#include "hc-crisv10.h" -+#include "hc-cris-dbg.h" -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Host Controller settings */ -+/***************************************************************************/ -+/***************************************************************************/ -+ -+#define VERSION "1.00" -+#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB" -+#define DESCRIPTION "ETRAX 100LX USB Host Controller" - - #define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR - #define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR - #define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR - --static const char *usb_hcd_version = "$Revision: 1.2 $"; -- --#undef KERN_DEBUG --#define KERN_DEBUG "" -- -- --#undef USB_DEBUG_RH --#undef USB_DEBUG_EPID --#undef USB_DEBUG_SB --#undef USB_DEBUG_DESC --#undef USB_DEBUG_URB --#undef USB_DEBUG_TRACE --#undef USB_DEBUG_BULK --#undef USB_DEBUG_CTRL --#undef USB_DEBUG_INTR --#undef USB_DEBUG_ISOC -- --#ifdef USB_DEBUG_RH --#define dbg_rh(format, arg...) printk(KERN_DEBUG __FILE__ ": (RH) " format "\n" , ## arg) --#else --#define dbg_rh(format, arg...) do {} while (0) --#endif -- --#ifdef USB_DEBUG_EPID --#define dbg_epid(format, arg...) printk(KERN_DEBUG __FILE__ ": (EPID) " format "\n" , ## arg) --#else --#define dbg_epid(format, arg...) do {} while (0) --#endif -- --#ifdef USB_DEBUG_SB --#define dbg_sb(format, arg...) printk(KERN_DEBUG __FILE__ ": (SB) " format "\n" , ## arg) --#else --#define dbg_sb(format, arg...) do {} while (0) --#endif -- --#ifdef USB_DEBUG_CTRL --#define dbg_ctrl(format, arg...) printk(KERN_DEBUG __FILE__ ": (CTRL) " format "\n" , ## arg) --#else --#define dbg_ctrl(format, arg...) do {} while (0) --#endif -- --#ifdef USB_DEBUG_BULK --#define dbg_bulk(format, arg...) printk(KERN_DEBUG __FILE__ ": (BULK) " format "\n" , ## arg) --#else --#define dbg_bulk(format, arg...) do {} while (0) --#endif -- --#ifdef USB_DEBUG_INTR --#define dbg_intr(format, arg...) printk(KERN_DEBUG __FILE__ ": (INTR) " format "\n" , ## arg) --#else --#define dbg_intr(format, arg...) do {} while (0) --#endif -- --#ifdef USB_DEBUG_ISOC --#define dbg_isoc(format, arg...) printk(KERN_DEBUG __FILE__ ": (ISOC) " format "\n" , ## arg) --#else --#define dbg_isoc(format, arg...) do {} while (0) --#endif -- --#ifdef USB_DEBUG_TRACE --#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) --#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) --#else --#define DBFENTER do {} while (0) --#define DBFEXIT do {} while (0) --#endif -- --#define usb_pipeslow(pipe) (((pipe) >> 26) & 1) -- --/*------------------------------------------------------------------- -- Virtual Root Hub -- -------------------------------------------------------------------*/ -- --static __u8 root_hub_dev_des[] = --{ -- 0x12, /* __u8 bLength; */ -- 0x01, /* __u8 bDescriptorType; Device */ -- 0x00, /* __le16 bcdUSB; v1.0 */ -- 0x01, -- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ -- 0x00, /* __u8 bDeviceSubClass; */ -- 0x00, /* __u8 bDeviceProtocol; */ -- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ -- 0x00, /* __le16 idVendor; */ -- 0x00, -- 0x00, /* __le16 idProduct; */ -- 0x00, -- 0x00, /* __le16 bcdDevice; */ -- 0x00, -- 0x00, /* __u8 iManufacturer; */ -- 0x02, /* __u8 iProduct; */ -- 0x01, /* __u8 iSerialNumber; */ -- 0x01 /* __u8 bNumConfigurations; */ --}; -- --/* Configuration descriptor */ --static __u8 root_hub_config_des[] = --{ -- 0x09, /* __u8 bLength; */ -- 0x02, /* __u8 bDescriptorType; Configuration */ -- 0x19, /* __le16 wTotalLength; */ -- 0x00, -- 0x01, /* __u8 bNumInterfaces; */ -- 0x01, /* __u8 bConfigurationValue; */ -- 0x00, /* __u8 iConfiguration; */ -- 0x40, /* __u8 bmAttributes; Bit 7: Bus-powered */ -- 0x00, /* __u8 MaxPower; */ -- -- /* interface */ -- 0x09, /* __u8 if_bLength; */ -- 0x04, /* __u8 if_bDescriptorType; Interface */ -- 0x00, /* __u8 if_bInterfaceNumber; */ -- 0x00, /* __u8 if_bAlternateSetting; */ -- 0x01, /* __u8 if_bNumEndpoints; */ -- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ -- 0x00, /* __u8 if_bInterfaceSubClass; */ -- 0x00, /* __u8 if_bInterfaceProtocol; */ -- 0x00, /* __u8 if_iInterface; */ -- -- /* endpoint */ -- 0x07, /* __u8 ep_bLength; */ -- 0x05, /* __u8 ep_bDescriptorType; Endpoint */ -- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ -- 0x03, /* __u8 ep_bmAttributes; Interrupt */ -- 0x08, /* __le16 ep_wMaxPacketSize; 8 Bytes */ -- 0x00, -- 0xff /* __u8 ep_bInterval; 255 ms */ --}; -- --static __u8 root_hub_hub_des[] = --{ -- 0x09, /* __u8 bLength; */ -- 0x29, /* __u8 bDescriptorType; Hub-descriptor */ -- 0x02, /* __u8 bNbrPorts; */ -- 0x00, /* __u16 wHubCharacteristics; */ -- 0x00, -- 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ -- 0x00, /* __u8 bHubContrCurrent; 0 mA */ -- 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ -- 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ --}; -- --static DEFINE_TIMER(bulk_start_timer, NULL, 0, 0); --static DEFINE_TIMER(bulk_eot_timer, NULL, 0, 0); -- --/* We want the start timer to expire before the eot timer, because the former might start -- traffic, thus making it unnecessary for the latter to time out. */ --#define BULK_START_TIMER_INTERVAL (HZ/10) /* 100 ms */ --#define BULK_EOT_TIMER_INTERVAL (HZ/10+2) /* 120 ms */ -- --#define OK(x) len = (x); dbg_rh("OK(%d): line: %d", x, __LINE__); break --#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ --{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} -- --#define SLAB_FLAG (in_interrupt() ? SLAB_ATOMIC : SLAB_KERNEL) --#define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) -- --/* Most helpful debugging aid */ --#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__)))) -- --/* Alternative assert define which stops after a failed assert. */ --/* --#define assert(expr) \ --{ \ -- if (!(expr)) { \ -- err("assert failed at line %d",__LINE__); \ -- while (1); \ -- } \ --} --*/ -- -+/* Number of physical ports in Etrax 100LX */ -+#define USB_ROOT_HUB_PORTS 2 - --/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it dynamically? -- To adjust it dynamically we would have to get an interrupt when we reach the end -- of the rx descriptor list, or when we get close to the end, and then allocate more -- descriptors. */ -- --#define NBR_OF_RX_DESC 512 --#define RX_DESC_BUF_SIZE 1024 --#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) -+const char hc_name[] = "hc-crisv10"; -+const char product_desc[] = DESCRIPTION; - - /* The number of epids is, among other things, used for pre-allocating - ctrl, bulk and isoc EP descriptors (one for each epid). -@@ -221,4332 +53,4632 @@ - #define NBR_OF_EPIDS 32 - - /* Support interrupt traffic intervals up to 128 ms. */ --#define MAX_INTR_INTERVAL 128 -+#define MAX_INTR_INTERVAL 128 - --/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP table -- must be "invalid". By this we mean that we shouldn't care about epid attentions -- for this epid, or at least handle them differently from epid attentions for "valid" -- epids. This define determines which one to use (don't change it). */ --#define INVALID_EPID 31 -+/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP -+ table must be "invalid". By this we mean that we shouldn't care about epid -+ attentions for this epid, or at least handle them differently from epid -+ attentions for "valid" epids. This define determines which one to use -+ (don't change it). */ -+#define INVALID_EPID 31 - /* A special epid for the bulk dummys. */ --#define DUMMY_EPID 30 -- --/* This is just a software cache for the valid entries in R_USB_EPT_DATA. */ --static __u32 epid_usage_bitmask; -- --/* A bitfield to keep information on in/out traffic is needed to uniquely identify -- an endpoint on a device, since the most significant bit which indicates traffic -- direction is lacking in the ep_id field (ETRAX epids can handle both in and -- out traffic on endpoints that are otherwise identical). The USB framework, however, -- relies on them to be handled separately. For example, bulk IN and OUT urbs cannot -- be queued in the same list, since they would block each other. */ --static __u32 epid_out_traffic; -- --/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. -- Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be cache aligned. */ --static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); --static volatile USB_IN_Desc_t RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); -- --/* Pointers into RxDescList. */ --static volatile USB_IN_Desc_t *myNextRxDesc; --static volatile USB_IN_Desc_t *myLastRxDesc; --static volatile USB_IN_Desc_t *myPrevRxDesc; -- --/* EP descriptors must be 32-bit aligned. */ --static volatile USB_EP_Desc_t TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); --static volatile USB_EP_Desc_t TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); --/* After each enabled bulk EP (IN or OUT) we put two disabled EP descriptors with the eol flag set, -- causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which -- gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the -- EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors -- in each frame. */ --static volatile USB_EP_Desc_t TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); -- --static volatile USB_EP_Desc_t TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); --static volatile USB_SB_Desc_t TxIsocSB_zout __attribute__ ((aligned (4))); -- --static volatile USB_EP_Desc_t TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); --static volatile USB_SB_Desc_t TxIntrSB_zout __attribute__ ((aligned (4))); -- --/* A zout transfer makes a memory access at the address of its buf pointer, which means that setting -- this buf pointer to 0 will cause an access to the flash. In addition to this, setting sw_len to 0 -- results in a 16/32 bytes (depending on DMA burst size) transfer. Instead, we set it to 1, and point -- it to this buffer. */ --static int zout_buffer[4] __attribute__ ((aligned (4))); -+#define DUMMY_EPID 30 - --/* Cache for allocating new EP and SB descriptors. */ --static kmem_cache_t *usb_desc_cache; -+/* Module settings */ - --/* Cache for the registers allocated in the top half. */ --static kmem_cache_t *top_half_reg_cache; -+MODULE_DESCRIPTION(DESCRIPTION); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Konrad Eriksson "); - --/* Cache for the data allocated in the isoc descr top half. */ --static kmem_cache_t *isoc_compl_cache; - --static struct usb_bus *etrax_usb_bus; -+/* Module parameters */ - --/* This is a circular (double-linked) list of the active urbs for each epid. -- The head is never removed, and new urbs are linked onto the list as -- urb_entry_t elements. Don't reference urb_list directly; use the wrapper -- functions instead. Note that working with these lists might require spinlock -- protection. */ --static struct list_head urb_list[NBR_OF_EPIDS]; -+/* 0 = No ports enabled -+ 1 = Only port 1 enabled (on board ethernet on devboard) -+ 2 = Only port 2 enabled (external connector on devboard) -+ 3 = Both ports enabled -+*/ -+static unsigned int ports = 3; -+module_param(ports, uint, S_IRUGO); -+MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use"); - --/* Read about the need and usage of this lock in submit_ctrl_urb. */ --static spinlock_t urb_list_lock; - --/* Used when unlinking asynchronously. */ --static struct list_head urb_unlink_list; -+/***************************************************************************/ -+/***************************************************************************/ -+/* Shared global variables for this module */ -+/***************************************************************************/ -+/***************************************************************************/ - --/* for returning string descriptors in UTF-16LE */ --static int ascii2utf (char *ascii, __u8 *utf, int utfmax) --{ -- int retval; -+/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */ -+static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); - -- for (retval = 0; *ascii && utfmax > 1; utfmax -= 2, retval += 2) { -- *utf++ = *ascii++ & 0x7f; -- *utf++ = 0; -- } -- return retval; --} -+static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); - --static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) --{ -- char buf [30]; -+/* EP descriptor lists for period transfers. Must be 32-bit aligned. */ -+static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); -+static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4))); - -- // assert (len > (2 * (sizeof (buf) + 1))); -- // assert (strlen (type) <= 8); -+static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -+static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4))); - -- // language ids -- if (id == 0) { -- *data++ = 4; *data++ = 3; /* 4 bytes data */ -- *data++ = 0; *data++ = 0; /* some language id */ -- return 4; -- -- // serial number -- } else if (id == 1) { -- sprintf (buf, "%x", serial); -- -- // product description -- } else if (id == 2) { -- sprintf (buf, "USB %s Root Hub", type); -- -- // id 3 == vendor description -- -- // unsupported IDs --> "stall" -- } else -- return 0; -- -- data [0] = 2 + ascii2utf (buf, data + 2, len - 2); -- data [1] = 3; -- return data [0]; --} -+static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); - --/* Wrappers around the list functions (include/linux/list.h). */ -+/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set, -+ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which -+ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the -+ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors -+ in each frame. */ -+static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); - --static inline int urb_list_empty(int epid) -+/* List of URB pointers, where each points to the active URB for a epid. -+ For Bulk, Ctrl and Intr this means which URB that currently is added to -+ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as -+ URB has completed is the queue examined and the first URB in queue is -+ removed and moved to the activeUrbList while its state change to STARTED and -+ its transfer(s) gets added to DMA list (exception Isoc where URBs enter -+ state STARTED directly and added transfers added to DMA lists). */ -+static struct urb *activeUrbList[NBR_OF_EPIDS]; -+ -+/* Additional software state info for each epid */ -+static struct etrax_epid epid_state[NBR_OF_EPIDS]; -+ -+/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops -+ even if there is new data waiting to be processed */ -+static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0); -+static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0); -+ -+/* We want the start timer to expire before the eot timer, because the former -+ might start traffic, thus making it unnecessary for the latter to time -+ out. */ -+#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */ -+#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */ -+ -+/* Delay before a URB completion happen when it's scheduled to be delayed */ -+#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */ -+ -+/* Simplifying macros for checking software state info of a epid */ -+/* ----------------------------------------------------------------------- */ -+#define epid_inuse(epid) epid_state[epid].inuse -+#define epid_out_traffic(epid) epid_state[epid].out_traffic -+#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0) -+#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0) -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* DEBUG FUNCTIONS */ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Note that these functions are always available in their "__" variants, -+ for use in error situations. The "__" missing variants are controlled by -+ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */ -+static void __dump_urb(struct urb* purb) - { -- return list_empty(&urb_list[epid]); -+ struct crisv10_urb_priv *urb_priv = purb->hcpriv; -+ int urb_num = -1; -+ if(urb_priv) { -+ urb_num = urb_priv->urb_num; -+ } -+ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num); -+ printk("dev :0x%08lx\n", (unsigned long)purb->dev); -+ printk("pipe :0x%08x\n", purb->pipe); -+ printk("status :%d\n", purb->status); -+ printk("transfer_flags :0x%08x\n", purb->transfer_flags); -+ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); -+ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); -+ printk("actual_length :%d\n", purb->actual_length); -+ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); -+ printk("start_frame :%d\n", purb->start_frame); -+ printk("number_of_packets :%d\n", purb->number_of_packets); -+ printk("interval :%d\n", purb->interval); -+ printk("error_count :%d\n", purb->error_count); -+ printk("context :0x%08lx\n", (unsigned long)purb->context); -+ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); -+} -+ -+static void __dump_in_desc(volatile struct USB_IN_Desc *in) -+{ -+ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); -+ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); -+ printk(" command : 0x%04x\n", in->command); -+ printk(" next : 0x%08lx\n", in->next); -+ printk(" buf : 0x%08lx\n", in->buf); -+ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); -+ printk(" status : 0x%04x\n\n", in->status); -+} -+ -+static void __dump_sb_desc(volatile struct USB_SB_Desc *sb) -+{ -+ char tt = (sb->command & 0x30) >> 4; -+ char *tt_string; -+ -+ switch (tt) { -+ case 0: -+ tt_string = "zout"; -+ break; -+ case 1: -+ tt_string = "in"; -+ break; -+ case 2: -+ tt_string = "out"; -+ break; -+ case 3: -+ tt_string = "setup"; -+ break; -+ default: -+ tt_string = "unknown (weird)"; -+ } -+ -+ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb); -+ printk(" command:0x%04x (", sb->command); -+ printk("rem:%d ", (sb->command & 0x3f00) >> 8); -+ printk("full:%d ", (sb->command & 0x40) >> 6); -+ printk("tt:%d(%s) ", tt, tt_string); -+ printk("intr:%d ", (sb->command & 0x8) >> 3); -+ printk("eot:%d ", (sb->command & 0x2) >> 1); -+ printk("eol:%d)", sb->command & 0x1); -+ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len); -+ printk(" next:0x%08lx", sb->next); -+ printk(" buf:0x%08lx\n", sb->buf); -+} -+ -+ -+static void __dump_ep_desc(volatile struct USB_EP_Desc *ep) -+{ -+ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep); -+ printk(" command:0x%04x (", ep->command); -+ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8); -+ printk("enable:%d ", (ep->command & 0x10) >> 4); -+ printk("intr:%d ", (ep->command & 0x8) >> 3); -+ printk("eof:%d ", (ep->command & 0x2) >> 1); -+ printk("eol:%d)", ep->command & 0x1); -+ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len); -+ printk(" next:0x%08lx", ep->next); -+ printk(" sub:0x%08lx\n", ep->sub); - } - --/* Returns first urb for this epid, or NULL if list is empty. */ --static inline struct urb *urb_list_first(int epid) -+static inline void __dump_ep_list(int pipe_type) - { -- struct urb *first_urb = 0; -+ volatile struct USB_EP_Desc *ep; -+ volatile struct USB_EP_Desc *first_ep; -+ volatile struct USB_SB_Desc *sb; -+ -+ switch (pipe_type) -+ { -+ case PIPE_BULK: -+ first_ep = &TxBulkEPList[0]; -+ break; -+ case PIPE_CONTROL: -+ first_ep = &TxCtrlEPList[0]; -+ break; -+ case PIPE_INTERRUPT: -+ first_ep = &TxIntrEPList[0]; -+ break; -+ case PIPE_ISOCHRONOUS: -+ first_ep = &TxIsocEPList[0]; -+ break; -+ default: -+ warn("Cannot dump unknown traffic type"); -+ return; -+ } -+ ep = first_ep; -+ -+ printk("\n\nDumping EP list...\n\n"); -+ -+ do { -+ __dump_ep_desc(ep); -+ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ -+ sb = ep->sub ? phys_to_virt(ep->sub) : 0; -+ while (sb) { -+ __dump_sb_desc(sb); -+ sb = sb->next ? phys_to_virt(sb->next) : 0; -+ } -+ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next)); - -- if (!urb_list_empty(epid)) { -- /* Get the first urb (i.e. head->next). */ -- urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); -- first_urb = urb_entry->urb; -- } -- return first_urb; -+ } while (ep != first_ep); - } - --/* Adds an urb_entry last in the list for this epid. */ --static inline void urb_list_add(struct urb *urb, int epid) -+static inline void __dump_ept_data(int epid) - { -- urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG); -- assert(urb_entry); -+ unsigned long flags; -+ __u32 r_usb_ept_data; - -- urb_entry->urb = urb; -- list_add_tail(&urb_entry->list, &urb_list[epid]); -+ if (epid < 0 || epid > 31) { -+ printk("Cannot dump ept data for invalid epid %d\n", epid); -+ return; -+ } -+ -+ local_irq_save(flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -+ nop(); -+ r_usb_ept_data = *R_USB_EPT_DATA; -+ local_irq_restore(flags); -+ -+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); -+ if (r_usb_ept_data == 0) { -+ /* No need for more detailed printing. */ -+ return; -+ } -+ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); -+ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); -+ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); -+ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); -+ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); -+ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); -+ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); -+ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); -+ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); -+ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); -+ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); -+ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); -+} -+ -+static inline void __dump_ept_data_iso(int epid) -+{ -+ unsigned long flags; -+ __u32 ept_data; -+ -+ if (epid < 0 || epid > 31) { -+ printk("Cannot dump ept data for invalid epid %d\n", epid); -+ return; -+ } -+ -+ local_irq_save(flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -+ nop(); -+ ept_data = *R_USB_EPT_DATA_ISO; -+ local_irq_restore(flags); -+ -+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid); -+ if (ept_data == 0) { -+ /* No need for more detailed printing. */ -+ return; -+ } -+ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid, -+ ept_data)); -+ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port, -+ ept_data)); -+ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, -+ ept_data)); -+ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, -+ ept_data)); -+ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, -+ ept_data)); -+ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, -+ ept_data)); - } - --/* Search through the list for an element that contains this urb. (The list -- is expected to be short and the one we are about to delete will often be -- the first in the list.) */ --static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) -+static inline void __dump_ept_data_list(void) - { -- struct list_head *entry; -- struct list_head *tmp; -- urb_entry_t *urb_entry; -- -- list_for_each_safe(entry, tmp, &urb_list[epid]) { -- urb_entry = list_entry(entry, urb_entry_t, list); -- assert(urb_entry); -- assert(urb_entry->urb); -- -- if (urb_entry->urb == urb) { -- return urb_entry; -- } -- } -- return 0; --} -+ int i; - --/* Delete an urb from the list. */ --static inline void urb_list_del(struct urb *urb, int epid) --{ -- urb_entry_t *urb_entry = __urb_list_entry(urb, epid); -- assert(urb_entry); -+ printk("Dumping the whole R_USB_EPT_DATA list\n"); - -- /* Delete entry and free. */ -- list_del(&urb_entry->list); -- kfree(urb_entry); -+ for (i = 0; i < 32; i++) { -+ __dump_ept_data(i); -+ } -+} -+ -+static void debug_epid(int epid) { -+ int i; -+ -+ if(epid_isoc(epid)) { -+ __dump_ept_data_iso(epid); -+ } else { -+ __dump_ept_data(epid); -+ } -+ -+ printk("Bulk:\n"); -+ for(i = 0; i < 32; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i])); -+ } -+ } -+ -+ printk("Ctrl:\n"); -+ for(i = 0; i < 32; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i])); -+ } -+ } -+ -+ printk("Intr:\n"); -+ for(i = 0; i < MAX_INTR_INTERVAL; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i])); -+ } -+ } -+ -+ printk("Isoc:\n"); -+ for(i = 0; i < 32; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i])); -+ } -+ } -+ -+ __dump_ept_data_list(); -+ __dump_ep_list(PIPE_INTERRUPT); -+ printk("\n\n"); -+} -+ -+ -+ -+char* hcd_status_to_str(__u8 bUsbStatus) { -+ static char hcd_status_str[128]; -+ hcd_status_str[0] = '\0'; -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) { -+ strcat(hcd_status_str, "ourun "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) { -+ strcat(hcd_status_str, "perror "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) { -+ strcat(hcd_status_str, "device_mode "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) { -+ strcat(hcd_status_str, "host_mode "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) { -+ strcat(hcd_status_str, "started "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) { -+ strcat(hcd_status_str, "running "); -+ } -+ return hcd_status_str; -+} -+ -+ -+char* sblist_to_str(struct USB_SB_Desc* sb_desc) { -+ static char sblist_to_str_buff[128]; -+ char tmp[32], tmp2[32]; -+ sblist_to_str_buff[0] = '\0'; -+ while(sb_desc != NULL) { -+ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) { -+ case 0: sprintf(tmp, "zout"); break; -+ case 1: sprintf(tmp, "in"); break; -+ case 2: sprintf(tmp, "out"); break; -+ case 3: sprintf(tmp, "setup"); break; -+ } -+ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len); -+ strcat(sblist_to_str_buff, tmp2); -+ if(sb_desc->next != 0) { -+ sb_desc = phys_to_virt(sb_desc->next); -+ } else { -+ sb_desc = NULL; -+ } -+ } -+ return sblist_to_str_buff; -+} -+ -+char* port_status_to_str(__u16 wPortStatus) { -+ static char port_status_str[128]; -+ port_status_str[0] = '\0'; -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) { -+ strcat(port_status_str, "connected "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) { -+ strcat(port_status_str, "enabled "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) { -+ strcat(port_status_str, "suspended "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) { -+ strcat(port_status_str, "reset "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) { -+ strcat(port_status_str, "full-speed "); -+ } else { -+ strcat(port_status_str, "low-speed "); -+ } -+ return port_status_str; -+} -+ -+ -+char* endpoint_to_str(struct usb_endpoint_descriptor *ed) { -+ static char endpoint_to_str_buff[128]; -+ char tmp[32]; -+ int epnum = ed->bEndpointAddress & 0x0F; -+ int dir = ed->bEndpointAddress & 0x80; -+ int type = ed->bmAttributes & 0x03; -+ endpoint_to_str_buff[0] = '\0'; -+ sprintf(endpoint_to_str_buff, "ep:%d ", epnum); -+ switch(type) { -+ case 0: -+ sprintf(tmp, " ctrl"); -+ break; -+ case 1: -+ sprintf(tmp, " isoc"); -+ break; -+ case 2: -+ sprintf(tmp, " bulk"); -+ break; -+ case 3: -+ sprintf(tmp, " intr"); -+ break; -+ } -+ strcat(endpoint_to_str_buff, tmp); -+ if(dir) { -+ sprintf(tmp, " in"); -+ } else { -+ sprintf(tmp, " out"); -+ } -+ strcat(endpoint_to_str_buff, tmp); -+ -+ return endpoint_to_str_buff; -+} -+ -+/* Debug helper functions for Transfer Controller */ -+char* pipe_to_str(unsigned int pipe) { -+ static char pipe_to_str_buff[128]; -+ char tmp[64]; -+ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe)); -+ sprintf(tmp, " type:%s", str_type(pipe)); -+ strcat(pipe_to_str_buff, tmp); -+ -+ sprintf(tmp, " dev:%d", usb_pipedevice(pipe)); -+ strcat(pipe_to_str_buff, tmp); -+ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe)); -+ strcat(pipe_to_str_buff, tmp); -+ return pipe_to_str_buff; - } - --/* Move an urb to the end of the list. */ --static inline void urb_list_move_last(struct urb *urb, int epid) --{ -- urb_entry_t *urb_entry = __urb_list_entry(urb, epid); -- assert(urb_entry); -- -- list_move_tail(&urb_entry->list, &urb_list[epid]); --} - --/* Get the next urb in the list. */ --static inline struct urb *urb_list_next(struct urb *urb, int epid) --{ -- urb_entry_t *urb_entry = __urb_list_entry(urb, epid); -+#define USB_DEBUG_DESC 1 - -- assert(urb_entry); -+#ifdef USB_DEBUG_DESC -+#define dump_in_desc(x) __dump_in_desc(x) -+#define dump_sb_desc(...) __dump_sb_desc(...) -+#define dump_ep_desc(x) __dump_ep_desc(x) -+#define dump_ept_data(x) __dump_ept_data(x) -+#else -+#define dump_in_desc(...) do {} while (0) -+#define dump_sb_desc(...) do {} while (0) -+#define dump_ep_desc(...) do {} while (0) -+#endif - -- if (urb_entry->list.next != &urb_list[epid]) { -- struct list_head *elem = urb_entry->list.next; -- urb_entry = list_entry(elem, urb_entry_t, list); -- return urb_entry->urb; -- } else { -- return NULL; -- } --} - -+/* Uncomment this to enable massive function call trace -+ #define USB_DEBUG_TRACE */ - -+#ifdef USB_DEBUG_TRACE -+#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) -+#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) -+#else -+#define DBFENTER do {} while (0) -+#define DBFEXIT do {} while (0) -+#endif - --/* For debug purposes only. */ --static inline void urb_list_dump(int epid) --{ -- struct list_head *entry; -- struct list_head *tmp; -- urb_entry_t *urb_entry; -- int i = 0; -- -- info("Dumping urb list for epid %d", epid); -- -- list_for_each_safe(entry, tmp, &urb_list[epid]) { -- urb_entry = list_entry(entry, urb_entry_t, list); -- info(" entry %d, urb = 0x%lx", i, (unsigned long)urb_entry->urb); -- } --} -+#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ -+{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} - --static void init_rx_buffers(void); --static int etrax_rh_unlink_urb(struct urb *urb); --static void etrax_rh_send_irq(struct urb *urb); --static void etrax_rh_init_int_timer(struct urb *urb); --static void etrax_rh_int_timer_do(unsigned long ptr); -- --static int etrax_usb_setup_epid(struct urb *urb); --static int etrax_usb_lookup_epid(struct urb *urb); --static int etrax_usb_allocate_epid(void); --static void etrax_usb_free_epid(int epid); -- --static int etrax_remove_from_sb_list(struct urb *urb); -- --static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, -- unsigned mem_flags, dma_addr_t *dma); --static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); -- --static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid); --static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid); --static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid); --static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid); -- --static int etrax_usb_submit_bulk_urb(struct urb *urb); --static int etrax_usb_submit_ctrl_urb(struct urb *urb); --static int etrax_usb_submit_intr_urb(struct urb *urb); --static int etrax_usb_submit_isoc_urb(struct urb *urb); -- --static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags); --static int etrax_usb_unlink_urb(struct urb *urb, int status); --static int etrax_usb_get_frame_number(struct usb_device *usb_dev); -- --static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc); --static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc); --static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc); --static void etrax_usb_hc_interrupt_bottom_half(void *data); -- --static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data); -- -- --/* The following is a list of interrupt handlers for the host controller interrupts we use. -- They are called from etrax_usb_hc_interrupt_bottom_half. */ --static void etrax_usb_hc_isoc_eof_interrupt(void); --static void etrax_usb_hc_bulk_eot_interrupt(int timer_induced); --static void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg); --static void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg); --static void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg); -- --static int etrax_rh_submit_urb (struct urb *urb); -- --/* Forward declaration needed because they are used in the rx interrupt routine. */ --static void etrax_usb_complete_urb(struct urb *urb, int status); --static void etrax_usb_complete_bulk_urb(struct urb *urb, int status); --static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status); --static void etrax_usb_complete_intr_urb(struct urb *urb, int status); --static void etrax_usb_complete_isoc_urb(struct urb *urb, int status); -+/* Most helpful debugging aid */ -+#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__)))) - --static int etrax_usb_hc_init(void); --static void etrax_usb_hc_cleanup(void); - --static struct usb_operations etrax_usb_device_operations = --{ -- .get_frame_number = etrax_usb_get_frame_number, -- .submit_urb = etrax_usb_submit_urb, -- .unlink_urb = etrax_usb_unlink_urb, -- .buffer_alloc = etrax_usb_buffer_alloc, -- .buffer_free = etrax_usb_buffer_free --}; -+/***************************************************************************/ -+/***************************************************************************/ -+/* Forward declarations */ -+/***************************************************************************/ -+/***************************************************************************/ -+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg); -+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg); -+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg); -+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg); -+ -+void rh_port_status_change(__u16[]); -+int rh_clear_port_feature(__u8, __u16); -+int rh_set_port_feature(__u8, __u16); -+static void rh_disable_port(unsigned int port); -+ -+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, -+ int timer); -+ -+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, -+ int mem_flags); -+static void tc_free_epid(struct usb_host_endpoint *ep); -+static int tc_allocate_epid(void); -+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status); -+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, -+ int status); -+ -+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, -+ int mem_flags); -+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb); -+ -+static inline struct urb *urb_list_first(int epid); -+static inline void urb_list_add(struct urb *urb, int epid, -+ int mem_flags); -+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid); -+static inline void urb_list_del(struct urb *urb, int epid); -+static inline void urb_list_move_last(struct urb *urb, int epid); -+static inline struct urb *urb_list_next(struct urb *urb, int epid); -+ -+int create_sb_for_urb(struct urb *urb, int mem_flags); -+int init_intr_urb(struct urb *urb, int mem_flags); -+ -+static inline void etrax_epid_set(__u8 index, __u32 data); -+static inline void etrax_epid_clear_error(__u8 index); -+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, -+ __u8 toggle); -+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout); -+static inline __u32 etrax_epid_get(__u8 index); -+ -+/* We're accessing the same register position in Etrax so -+ when we do full access the internal difference doesn't matter */ -+#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data) -+#define etrax_epid_iso_get(index) etrax_epid_get(index) -+ -+ -+static void tc_dma_process_isoc_urb(struct urb *urb); -+static void tc_dma_process_queue(int epid); -+static void tc_dma_unlink_intr_urb(struct urb *urb); -+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc); -+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc); -+ -+static void tc_bulk_start_timer_func(unsigned long dummy); -+static void tc_bulk_eot_timer_func(unsigned long dummy); -+ -+ -+/*************************************************************/ -+/*************************************************************/ -+/* Host Controler Driver block */ -+/*************************************************************/ -+/*************************************************************/ -+ -+/* HCD operations */ -+static irqreturn_t crisv10_hcd_top_irq(int irq, void*); -+static int crisv10_hcd_reset(struct usb_hcd *); -+static int crisv10_hcd_start(struct usb_hcd *); -+static void crisv10_hcd_stop(struct usb_hcd *); -+#ifdef CONFIG_PM -+static int crisv10_hcd_suspend(struct device *, u32, u32); -+static int crisv10_hcd_resume(struct device *, u32); -+#endif /* CONFIG_PM */ -+static int crisv10_hcd_get_frame(struct usb_hcd *); -+ -+static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags); -+static int tc_urb_dequeue(struct usb_hcd *, struct urb *); -+static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep); -+ -+static int rh_status_data_request(struct usb_hcd *, char *); -+static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16); -+ -+#ifdef CONFIG_PM -+static int crisv10_hcd_hub_suspend(struct usb_hcd *); -+static int crisv10_hcd_hub_resume(struct usb_hcd *); -+#endif /* CONFIG_PM */ -+#ifdef CONFIG_USB_OTG -+static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned); -+#endif /* CONFIG_USB_OTG */ -+ -+/* host controller driver interface */ -+static const struct hc_driver crisv10_hc_driver = -+ { -+ .description = hc_name, -+ .product_desc = product_desc, -+ .hcd_priv_size = sizeof(struct crisv10_hcd), -+ -+ /* Attaching IRQ handler manualy in probe() */ -+ /* .irq = crisv10_hcd_irq, */ -+ -+ .flags = HCD_USB11, -+ -+ /* called to init HCD and root hub */ -+ .reset = crisv10_hcd_reset, -+ .start = crisv10_hcd_start, -+ -+ /* cleanly make HCD stop writing memory and doing I/O */ -+ .stop = crisv10_hcd_stop, -+ -+ /* return current frame number */ -+ .get_frame_number = crisv10_hcd_get_frame, -+ -+ -+ /* Manage i/o requests via the Transfer Controller */ -+ .urb_enqueue = tc_urb_enqueue, -+ .urb_dequeue = tc_urb_dequeue, -+ -+ /* hw synch, freeing endpoint resources that urb_dequeue can't */ -+ .endpoint_disable = tc_endpoint_disable, -+ -+ -+ /* Root Hub support */ -+ .hub_status_data = rh_status_data_request, -+ .hub_control = rh_control_request, -+#ifdef CONFIG_PM -+ .hub_suspend = rh_suspend_request, -+ .hub_resume = rh_resume_request, -+#endif /* CONFIG_PM */ -+#ifdef CONFIG_USB_OTG -+ .start_port_reset = crisv10_hcd_start_port_reset, -+#endif /* CONFIG_USB_OTG */ -+ }; - --/* Note that these functions are always available in their "__" variants, for use in -- error situations. The "__" missing variants are controlled by the USB_DEBUG_DESC/ -- USB_DEBUG_URB macros. */ --static void __dump_urb(struct urb* purb) --{ -- printk("\nurb :0x%08lx\n", (unsigned long)purb); -- printk("dev :0x%08lx\n", (unsigned long)purb->dev); -- printk("pipe :0x%08x\n", purb->pipe); -- printk("status :%d\n", purb->status); -- printk("transfer_flags :0x%08x\n", purb->transfer_flags); -- printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); -- printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); -- printk("actual_length :%d\n", purb->actual_length); -- printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); -- printk("start_frame :%d\n", purb->start_frame); -- printk("number_of_packets :%d\n", purb->number_of_packets); -- printk("interval :%d\n", purb->interval); -- printk("error_count :%d\n", purb->error_count); -- printk("context :0x%08lx\n", (unsigned long)purb->context); -- printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); --} - --static void __dump_in_desc(volatile USB_IN_Desc_t *in) --{ -- printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); -- printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); -- printk(" command : 0x%04x\n", in->command); -- printk(" next : 0x%08lx\n", in->next); -- printk(" buf : 0x%08lx\n", in->buf); -- printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); -- printk(" status : 0x%04x\n\n", in->status); --} -+/* -+ * conversion between pointers to a hcd and the corresponding -+ * crisv10_hcd -+ */ - --static void __dump_sb_desc(volatile USB_SB_Desc_t *sb) -+static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd) - { -- char tt = (sb->command & 0x30) >> 4; -- char *tt_string; -- -- switch (tt) { -- case 0: -- tt_string = "zout"; -- break; -- case 1: -- tt_string = "in"; -- break; -- case 2: -- tt_string = "out"; -- break; -- case 3: -- tt_string = "setup"; -- break; -- default: -- tt_string = "unknown (weird)"; -- } -- -- printk("\n USB_SB_Desc at 0x%08lx\n", (unsigned long)sb); -- printk(" command : 0x%04x\n", sb->command); -- printk(" rem : %d\n", (sb->command & 0x3f00) >> 8); -- printk(" full : %d\n", (sb->command & 0x40) >> 6); -- printk(" tt : %d (%s)\n", tt, tt_string); -- printk(" intr : %d\n", (sb->command & 0x8) >> 3); -- printk(" eot : %d\n", (sb->command & 0x2) >> 1); -- printk(" eol : %d\n", sb->command & 0x1); -- printk(" sw_len : 0x%04x (%d)\n", sb->sw_len, sb->sw_len); -- printk(" next : 0x%08lx\n", sb->next); -- printk(" buf : 0x%08lx\n\n", sb->buf); -+ return (struct crisv10_hcd *) hcd->hcd_priv; - } - -- --static void __dump_ep_desc(volatile USB_EP_Desc_t *ep) -+static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd) - { -- printk("\nUSB_EP_Desc at 0x%08lx\n", (unsigned long)ep); -- printk(" command : 0x%04x\n", ep->command); -- printk(" ep_id : %d\n", (ep->command & 0x1f00) >> 8); -- printk(" enable : %d\n", (ep->command & 0x10) >> 4); -- printk(" intr : %d\n", (ep->command & 0x8) >> 3); -- printk(" eof : %d\n", (ep->command & 0x2) >> 1); -- printk(" eol : %d\n", ep->command & 0x1); -- printk(" hw_len : 0x%04x (%d)\n", ep->hw_len, ep->hw_len); -- printk(" next : 0x%08lx\n", ep->next); -- printk(" sub : 0x%08lx\n\n", ep->sub); -+ return container_of((void *) hcd, struct usb_hcd, hcd_priv); - } - --static inline void __dump_ep_list(int pipe_type) -+/* check if specified port is in use */ -+static inline int port_in_use(unsigned int port) - { -- volatile USB_EP_Desc_t *ep; -- volatile USB_EP_Desc_t *first_ep; -- volatile USB_SB_Desc_t *sb; -- -- switch (pipe_type) -- { -- case PIPE_BULK: -- first_ep = &TxBulkEPList[0]; -- break; -- case PIPE_CONTROL: -- first_ep = &TxCtrlEPList[0]; -- break; -- case PIPE_INTERRUPT: -- first_ep = &TxIntrEPList[0]; -- break; -- case PIPE_ISOCHRONOUS: -- first_ep = &TxIsocEPList[0]; -- break; -- default: -- warn("Cannot dump unknown traffic type"); -- return; -- } -- ep = first_ep; -- -- printk("\n\nDumping EP list...\n\n"); -- -- do { -- __dump_ep_desc(ep); -- /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ -- sb = ep->sub ? phys_to_virt(ep->sub) : 0; -- while (sb) { -- __dump_sb_desc(sb); -- sb = sb->next ? phys_to_virt(sb->next) : 0; -- } -- ep = (volatile USB_EP_Desc_t *)(phys_to_virt(ep->next)); -- -- } while (ep != first_ep); -+ return ports & (1 << port); - } - --static inline void __dump_ept_data(int epid) -+/* number of ports in use */ -+static inline unsigned int num_ports(void) - { -- unsigned long flags; -- __u32 r_usb_ept_data; -- -- if (epid < 0 || epid > 31) { -- printk("Cannot dump ept data for invalid epid %d\n", epid); -- return; -- } -- -- save_flags(flags); -- cli(); -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- r_usb_ept_data = *R_USB_EPT_DATA; -- restore_flags(flags); -- -- printk("\nR_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); -- if (r_usb_ept_data == 0) { -- /* No need for more detailed printing. */ -- return; -- } -- printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); -- printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); -- printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); -- printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); -- printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); -- printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); -- printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); -- printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); -- printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); -- printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); -- printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); -- printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); -+ unsigned int i, num = 0; -+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) -+ if (port_in_use(i)) -+ num++; -+ return num; - } - --static inline void __dump_ept_data_list(void) -+/* map hub port number to the port number used internally by the HC */ -+static inline unsigned int map_port(unsigned int port) - { -- int i; -- -- printk("Dumping the whole R_USB_EPT_DATA list\n"); -- -- for (i = 0; i < 32; i++) { -- __dump_ept_data(i); -- } -+ unsigned int i, num = 0; -+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) -+ if (port_in_use(i)) -+ if (++num == port) -+ return i; -+ return -1; - } --#ifdef USB_DEBUG_DESC --#define dump_in_desc(...) __dump_in_desc(...) --#define dump_sb_desc(...) __dump_sb_desc(...) --#define dump_ep_desc(...) __dump_ep_desc(...) --#else --#define dump_in_desc(...) do {} while (0) --#define dump_sb_desc(...) do {} while (0) --#define dump_ep_desc(...) do {} while (0) --#endif - --#ifdef USB_DEBUG_URB --#define dump_urb(x) __dump_urb(x) --#else --#define dump_urb(x) do {} while (0) -+/* size of descriptors in slab cache */ -+#ifndef MAX -+#define MAX(x, y) ((x) > (y) ? (x) : (y)) - #endif - --static void init_rx_buffers(void) --{ -- int i; - -- DBFENTER; -+/******************************************************************/ -+/* Hardware Interrupt functions */ -+/******************************************************************/ -+ -+/* Fast interrupt handler for HC */ -+static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd) -+{ -+ struct usb_hcd *hcd = vcd; -+ struct crisv10_irq_reg reg; -+ __u32 irq_mask; -+ unsigned long flags; -+ -+ DBFENTER; -+ -+ ASSERT(hcd != NULL); -+ reg.hcd = hcd; -+ -+ /* Turn of other interrupts while handling these sensitive cases */ -+ local_irq_save(flags); -+ -+ /* Read out which interrupts that are flaged */ -+ irq_mask = *R_USB_IRQ_MASK_READ; -+ reg.r_usb_irq_mask_read = irq_mask; -+ -+ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that -+ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter -+ clears the ourun and perror fields of R_USB_STATUS. */ -+ reg.r_usb_status = *R_USB_STATUS; -+ -+ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn -+ interrupts. */ -+ reg.r_usb_epid_attn = *R_USB_EPID_ATTN; -+ -+ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the -+ port_status interrupt. */ -+ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1; -+ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2; -+ -+ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ -+ /* Note: the lower 11 bits contain the actual frame number, sent with each -+ sof. */ -+ reg.r_usb_fm_number = *R_USB_FM_NUMBER; -+ -+ /* Interrupts are handled in order of priority. */ -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { -+ crisv10_hcd_port_status_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { -+ crisv10_hcd_epid_attn_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { -+ crisv10_hcd_ctl_status_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { -+ crisv10_hcd_isoc_eof_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { -+ /* Update/restart the bulk start timer since obviously the channel is -+ running. */ -+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); -+ /* Update/restart the bulk eot timer since we just received an bulk eot -+ interrupt. */ -+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -+ -+ /* Check for finished bulk transfers on epids */ -+ check_finished_bulk_tx_epids(hcd, 0); -+ } -+ local_irq_restore(flags); -+ -+ DBFEXIT; -+ return IRQ_HANDLED; -+} -+ -+ -+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) { -+ struct usb_hcd *hcd = reg->hcd; -+ struct crisv10_urb_priv *urb_priv; -+ int epid; -+ DBFENTER; -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if (test_bit(epid, (void *)®->r_usb_epid_attn)) { -+ struct urb *urb; -+ __u32 ept_data; -+ int error_code; -+ -+ if (epid == DUMMY_EPID || epid == INVALID_EPID) { -+ /* We definitely don't care about these ones. Besides, they are -+ always disabled, so any possible disabling caused by the -+ epid attention interrupt is irrelevant. */ -+ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid); -+ continue; -+ } -+ -+ if(!epid_inuse(epid)) { -+ irq_err("Epid attention on epid:%d that isn't in use\n", epid); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ debug_epid(epid); -+ continue; -+ } -+ -+ /* Note that although there are separate R_USB_EPT_DATA and -+ R_USB_EPT_DATA_ISO registers, they are located at the same address and -+ are of the same size. In other words, this read should be ok for isoc -+ also. */ -+ ept_data = etrax_epid_get(epid); -+ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data); -+ -+ /* Get the active URB for this epid. We blatantly assume -+ that only this URB could have caused the epid attention. */ -+ urb = activeUrbList[epid]; -+ if (urb == NULL) { -+ irq_err("Attention on epid:%d error:%d with no active URB.\n", -+ epid, error_code); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ debug_epid(epid); -+ continue; -+ } -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ -+ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ -+ /* Isoc traffic doesn't have error_count_in/error_count_out. */ -+ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && -+ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 || -+ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) { -+ /* Check if URB allready is marked for late-finish, we can get -+ several 3rd error for Intr traffic when a device is unplugged */ -+ if(urb_priv->later_data == NULL) { -+ /* 3rd error. */ -+ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe), -+ (unsigned int)urb, urb_priv->urb_num); -+ -+ tc_finish_urb_later(hcd, urb, -EPROTO); -+ } -+ -+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { -+ irq_warn("Perror for epid:%d\n", epid); -+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ __dump_urb(urb); -+ debug_epid(epid); -+ -+ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { -+ /* invalid ep_id */ -+ panic("Perror because of invalid epid." -+ " Deconfigured too early?"); -+ } else { -+ /* past eof1, near eof, zout transfer, setup transfer */ -+ /* Dump the urb and the relevant EP descriptor. */ -+ panic("Something wrong with DMA descriptor contents." -+ " Too much traffic inserted?"); -+ } -+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { -+ /* buffer ourun */ -+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ __dump_urb(urb); -+ debug_epid(epid); - -- for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { -- RxDescList[i].sw_len = RX_DESC_BUF_SIZE; -- RxDescList[i].command = 0; -- RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); -- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); -- RxDescList[i].hw_len = 0; -- RxDescList[i].status = 0; -- -- /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as USB_IN_Desc -- for the relevant fields.) */ -- prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); -+ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid); -+ } else { -+ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe)); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ __dump_urb(urb); -+ debug_epid(epid); -+ } - -+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, -+ stall)) { -+ /* Not really a protocol error, just says that the endpoint gave -+ a stall response. Note that error_code cannot be stall for isoc. */ -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ panic("Isoc traffic cannot stall"); - } - -- RxDescList[i].sw_len = RX_DESC_BUF_SIZE; -- RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); -- RxDescList[i].next = virt_to_phys(&RxDescList[0]); -- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); -- RxDescList[i].hw_len = 0; -- RxDescList[i].status = 0; -+ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb); -+ tc_finish_urb(hcd, urb, -EPIPE); -+ -+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, -+ bus_error)) { -+ /* Two devices responded to a transaction request. Must be resolved -+ by software. FIXME: Reset ports? */ -+ panic("Bus error for epid %d." -+ " Two devices responded to transaction request\n", -+ epid); -+ -+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, -+ buffer_error)) { -+ /* DMA overrun or underrun. */ -+ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe)); -+ -+ /* It seems that error_code = buffer_error in -+ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS -+ are the same error. */ -+ tc_finish_urb(hcd, urb, -EPROTO); -+ } else { -+ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe)); -+ dump_ept_data(epid); -+ } -+ } -+ } -+ DBFEXIT; -+} -+ -+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg) -+{ -+ __u16 port_reg[USB_ROOT_HUB_PORTS]; -+ DBFENTER; -+ port_reg[0] = reg->r_usb_rh_port_status_1; -+ port_reg[1] = reg->r_usb_rh_port_status_2; -+ rh_port_status_change(port_reg); -+ DBFEXIT; -+} -+ -+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg) -+{ -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv *urb_priv; -+ -+ DBFENTER; -+ -+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -+ -+ /* Only check epids that are in use, is valid and has SB list */ -+ if (!epid_inuse(epid) || epid == INVALID_EPID || -+ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) { -+ /* Nothing here to see. */ -+ continue; -+ } -+ ASSERT(epid_isoc(epid)); -+ -+ /* Get the active URB for this epid (if any). */ -+ urb = activeUrbList[epid]; -+ if (urb == 0) { -+ isoc_warn("Ignoring NULL urb for epid:%d\n", epid); -+ continue; -+ } -+ if(!epid_out_traffic(epid)) { -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ if (urb_priv->urb_state == NOT_STARTED) { -+ /* If ASAP is not set and urb->start_frame is the current frame, -+ start the transfer. */ -+ if (!(urb->transfer_flags & URB_ISO_ASAP) && -+ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { -+ /* EP should not be enabled if we're waiting for start_frame */ -+ ASSERT((TxIsocEPList[epid].command & -+ IO_STATE(USB_EP_command, enable, yes)) == 0); -+ -+ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid); -+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ -+ /* This urb is now active. */ -+ urb_priv->urb_state = STARTED; -+ continue; -+ } -+ } -+ } -+ } -+ -+ DBFEXIT; -+} -+ -+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg) -+{ -+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd); -+ -+ DBFENTER; -+ ASSERT(crisv10_hcd); -+ -+ irq_dbg("ctr_status_irq, controller status: %s\n", -+ hcd_status_to_str(reg->r_usb_status)); -+ -+ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB -+ list for the corresponding epid? */ -+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { -+ panic("USB controller got ourun."); -+ } -+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { -+ -+ /* Before, etrax_usb_do_intr_recover was called on this epid if it was -+ an interrupt pipe. I don't see how re-enabling all EP descriptors -+ will help if there was a programming error. */ -+ panic("USB controller got perror."); -+ } -+ -+ /* Keep track of USB Controller, if it's running or not */ -+ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) { -+ crisv10_hcd->running = 1; -+ } else { -+ crisv10_hcd->running = 0; -+ } -+ -+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { -+ /* We should never operate in device mode. */ -+ panic("USB controller in device mode."); -+ } -+ -+ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably -+ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */ -+ set_bit(HCD_FLAG_SAW_IRQ, ®->hcd->flags); -+ -+ DBFEXIT; -+} -+ -+ -+/******************************************************************/ -+/* Host Controller interface functions */ -+/******************************************************************/ -+ -+static inline void crisv10_ready_wait(void) { -+ volatile int timeout = 10000; -+ /* Check the busy bit of USB controller in Etrax */ -+ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for USB controller to be idle\n"); -+ } -+} -+ -+/* reset host controller */ -+static int crisv10_hcd_reset(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ hcd_dbg(hcd, "reset\n"); -+ -+ -+ /* Reset the USB interface. */ -+ /* -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); -+ nop(); -+ */ -+ DBFEXIT; -+ return 0; -+} -+ -+/* start host controller */ -+static int crisv10_hcd_start(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ hcd_dbg(hcd, "start\n"); -+ -+ crisv10_ready_wait(); -+ -+ /* Start processing of USB traffic. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -+ -+ nop(); -+ -+ hcd->state = HC_STATE_RUNNING; -+ -+ DBFEXIT; -+ return 0; -+} -+ -+/* stop host controller */ -+static void crisv10_hcd_stop(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ hcd_dbg(hcd, "stop\n"); -+ crisv10_hcd_reset(hcd); -+ DBFEXIT; -+} -+ -+/* return the current frame number */ -+static int crisv10_hcd_get_frame(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ DBFEXIT; -+ return (*R_USB_FM_NUMBER & 0x7ff); -+} -+ -+#ifdef CONFIG_USB_OTG -+ -+static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port) -+{ -+ return 0; /* no-op for now */ -+} -+ -+#endif /* CONFIG_USB_OTG */ -+ -+ -+/******************************************************************/ -+/* Root Hub functions */ -+/******************************************************************/ -+ -+/* root hub status */ -+static const struct usb_hub_status rh_hub_status = -+ { -+ .wHubStatus = 0, -+ .wHubChange = 0, -+ }; -+ -+/* root hub descriptor */ -+static const u8 rh_hub_descr[] = -+ { -+ 0x09, /* bDescLength */ -+ 0x29, /* bDescriptorType */ -+ USB_ROOT_HUB_PORTS, /* bNbrPorts */ -+ 0x00, /* wHubCharacteristics */ -+ 0x00, -+ 0x01, /* bPwrOn2pwrGood */ -+ 0x00, /* bHubContrCurrent */ -+ 0x00, /* DeviceRemovable */ -+ 0xff /* PortPwrCtrlMask */ -+ }; -+ -+/* Actual holder of root hub status*/ -+struct crisv10_rh rh; -+ -+/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */ -+int rh_init(void) { -+ int i; -+ /* Reset port status flags */ -+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) { -+ rh.wPortChange[i] = 0; -+ rh.wPortStatusPrev[i] = 0; -+ } -+ return 0; -+} -+ -+#define RH_FEAT_MASK ((1<lock); -+ for (i = 1; i <= crisv10_hcd->num_ports; i++) { -+ if (rh.wPortChange[map_port(i)]) { -+ *buf |= (1 << i); -+ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i, -+ port_status_to_str(rh.wPortChange[map_port(i)]), -+ port_status_to_str(rh.wPortStatusPrev[map_port(i)])); -+ } -+ } -+ spin_unlock(&crisv10_hcd->lock); -+ DBFEXIT; -+ return *buf == 0 ? 0 : 1; -+} -+ -+/* Handle a control request for the root hub (called from hcd_driver) */ -+static int rh_control_request(struct usb_hcd *hcd, -+ u16 typeReq, -+ u16 wValue, -+ u16 wIndex, -+ char *buf, -+ u16 wLength) { -+ -+ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ int retval = 0; -+ int len; -+ DBFENTER; -+ -+ switch (typeReq) { -+ case GetHubDescriptor: -+ rh_dbg("GetHubDescriptor\n"); -+ len = min_t(unsigned int, sizeof rh_hub_descr, wLength); -+ memcpy(buf, rh_hub_descr, len); -+ buf[2] = crisv10_hcd->num_ports; -+ break; -+ case GetHubStatus: -+ rh_dbg("GetHubStatus\n"); -+ len = min_t(unsigned int, sizeof rh_hub_status, wLength); -+ memcpy(buf, &rh_hub_status, len); -+ break; -+ case GetPortStatus: -+ if (!wIndex || wIndex > crisv10_hcd->num_ports) -+ goto error; -+ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex, -+ port_status_to_str(rh.wPortChange[map_port(wIndex)]), -+ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)])); -+ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]); -+ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]); -+ break; -+ case SetHubFeature: -+ rh_dbg("SetHubFeature\n"); -+ case ClearHubFeature: -+ rh_dbg("ClearHubFeature\n"); -+ switch (wValue) { -+ case C_HUB_OVER_CURRENT: -+ case C_HUB_LOCAL_POWER: -+ rh_warn("Not implemented hub request:%d \n", typeReq); -+ /* not implemented */ -+ break; -+ default: -+ goto error; -+ } -+ break; -+ case SetPortFeature: -+ if (!wIndex || wIndex > crisv10_hcd->num_ports) -+ goto error; -+ if(rh_set_port_feature(map_port(wIndex), wValue)) -+ goto error; -+ break; -+ case ClearPortFeature: -+ if (!wIndex || wIndex > crisv10_hcd->num_ports) -+ goto error; -+ if(rh_clear_port_feature(map_port(wIndex), wValue)) -+ goto error; -+ break; -+ default: -+ rh_warn("Unknown hub request: %d\n", typeReq); -+ error: -+ retval = -EPIPE; -+ } -+ DBFEXIT; -+ return retval; -+} -+ -+int rh_set_port_feature(__u8 bPort, __u16 wFeature) { -+ __u8 bUsbCommand = 0; -+ switch(wFeature) { -+ case USB_PORT_FEAT_RESET: -+ rh_dbg("SetPortFeature: reset\n"); -+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset); -+ goto set; -+ break; -+ case USB_PORT_FEAT_SUSPEND: -+ rh_dbg("SetPortFeature: suspend\n"); -+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend); -+ goto set; -+ break; -+ case USB_PORT_FEAT_POWER: -+ rh_dbg("SetPortFeature: power\n"); -+ break; -+ case USB_PORT_FEAT_C_CONNECTION: -+ rh_dbg("SetPortFeature: c_connection\n"); -+ break; -+ case USB_PORT_FEAT_C_RESET: -+ rh_dbg("SetPortFeature: c_reset\n"); -+ break; -+ case USB_PORT_FEAT_C_OVER_CURRENT: -+ rh_dbg("SetPortFeature: c_over_current\n"); -+ break; -+ -+ set: -+ /* Select which port via the port_sel field */ -+ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1); -+ -+ /* Make sure the controller isn't busy. */ -+ crisv10_ready_wait(); -+ /* Send out the actual command to the USB controller */ -+ *R_USB_COMMAND = bUsbCommand; -+ -+ /* If port reset then also bring USB controller into running state */ -+ if(wFeature == USB_PORT_FEAT_RESET) { -+ /* Wait a while for controller to first become started after port reset */ -+ udelay(12000); /* 12ms blocking wait */ -+ -+ /* Make sure the controller isn't busy. */ -+ crisv10_ready_wait(); -+ -+ /* If all enabled ports were disabled the host controller goes down into -+ started mode, so we need to bring it back into the running state. -+ (This is safe even if it's already in the running state.) */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -+ } -+ -+ break; -+ default: -+ rh_dbg("SetPortFeature: unknown feature\n"); -+ return -1; -+ } -+ return 0; -+} -+ -+int rh_clear_port_feature(__u8 bPort, __u16 wFeature) { -+ switch(wFeature) { -+ case USB_PORT_FEAT_ENABLE: -+ rh_dbg("ClearPortFeature: enable\n"); -+ rh_disable_port(bPort); -+ break; -+ case USB_PORT_FEAT_SUSPEND: -+ rh_dbg("ClearPortFeature: suspend\n"); -+ break; -+ case USB_PORT_FEAT_POWER: -+ rh_dbg("ClearPortFeature: power\n"); -+ break; -+ -+ case USB_PORT_FEAT_C_ENABLE: -+ rh_dbg("ClearPortFeature: c_enable\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_SUSPEND: -+ rh_dbg("ClearPortFeature: c_suspend\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_CONNECTION: -+ rh_dbg("ClearPortFeature: c_connection\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_OVER_CURRENT: -+ rh_dbg("ClearPortFeature: c_over_current\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_RESET: -+ rh_dbg("ClearPortFeature: c_reset\n"); -+ goto clear; -+ clear: -+ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16)); -+ break; -+ default: -+ rh_dbg("ClearPortFeature: unknown feature\n"); -+ return -1; -+ } -+ return 0; -+} -+ -+ -+#ifdef CONFIG_PM -+/* Handle a suspend request for the root hub (called from hcd_driver) */ -+static int rh_suspend_request(struct usb_hcd *hcd) -+{ -+ return 0; /* no-op for now */ -+} -+ -+/* Handle a resume request for the root hub (called from hcd_driver) */ -+static int rh_resume_request(struct usb_hcd *hcd) -+{ -+ return 0; /* no-op for now */ -+} -+#endif /* CONFIG_PM */ -+ -+ -+ -+/* Wrapper function for workaround port disable registers in USB controller */ -+static void rh_disable_port(unsigned int port) { -+ volatile int timeout = 10000; -+ volatile char* usb_portx_disable; -+ switch(port) { -+ case 0: -+ usb_portx_disable = R_USB_PORT1_DISABLE; -+ break; -+ case 1: -+ usb_portx_disable = R_USB_PORT2_DISABLE; -+ break; -+ default: -+ /* Invalid port index */ -+ return; -+ } -+ /* Set disable flag in special register */ -+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); -+ /* Wait until not enabled anymore */ -+ while((rh.wPortStatusPrev[port] & -+ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for port %d to become disabled\n", port); -+ } -+ /* clear disable flag in special register */ -+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no); -+ rh_info("Physical port %d disabled\n", port+1); -+} -+ -+ -+/******************************************************************/ -+/* Transfer Controller (TC) functions */ -+/******************************************************************/ -+ -+/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it -+ dynamically? -+ To adjust it dynamically we would have to get an interrupt when we reach -+ the end of the rx descriptor list, or when we get close to the end, and -+ then allocate more descriptors. */ -+#define NBR_OF_RX_DESC 512 -+#define RX_DESC_BUF_SIZE 1024 -+#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) - -- myNextRxDesc = &RxDescList[0]; -- myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; -- myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; - -- *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); -- *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); -+/* Local variables for Transfer Controller */ -+/* --------------------------------------- */ - -- DBFEXIT; --} -+/* This is a circular (double-linked) list of the active urbs for each epid. -+ The head is never removed, and new urbs are linked onto the list as -+ urb_entry_t elements. Don't reference urb_list directly; use the wrapper -+ functions instead (which includes spin_locks) */ -+static struct list_head urb_list[NBR_OF_EPIDS]; - --static void init_tx_bulk_ep(void) --{ -- int i; -+/* Read about the need and usage of this lock in submit_ctrl_urb. */ -+/* Lock for URB lists for each EPID */ -+static spinlock_t urb_list_lock; - -- DBFENTER; -+/* Lock for EPID array register (R_USB_EPT_x) in Etrax */ -+static spinlock_t etrax_epid_lock; - -- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -- CHECK_ALIGN(&TxBulkEPList[i]); -- TxBulkEPList[i].hw_len = 0; -- TxBulkEPList[i].command = IO_FIELD(USB_EP_command, epid, i); -- TxBulkEPList[i].sub = 0; -- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[i + 1]); -- -- /* Initiate two EPs, disabled and with the eol flag set. No need for any -- preserved epid. */ -- -- /* The first one has the intr flag set so we get an interrupt when the DMA -- channel is about to become disabled. */ -- CHECK_ALIGN(&TxBulkDummyEPList[i][0]); -- TxBulkDummyEPList[i][0].hw_len = 0; -- TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | -- IO_STATE(USB_EP_command, eol, yes) | -- IO_STATE(USB_EP_command, intr, yes)); -- TxBulkDummyEPList[i][0].sub = 0; -- TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); -- -- /* The second one. */ -- CHECK_ALIGN(&TxBulkDummyEPList[i][1]); -- TxBulkDummyEPList[i][1].hw_len = 0; -- TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | -- IO_STATE(USB_EP_command, eol, yes)); -- TxBulkDummyEPList[i][1].sub = 0; -- /* The last dummy's next pointer is the same as the current EP's next pointer. */ -- TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); -- } -+/* Lock for dma8 sub0 handling */ -+static spinlock_t etrax_dma8_sub0_lock; - -- /* Configure the last one. */ -- CHECK_ALIGN(&TxBulkEPList[i]); -- TxBulkEPList[i].hw_len = 0; -- TxBulkEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | -- IO_FIELD(USB_EP_command, epid, i)); -- TxBulkEPList[i].sub = 0; -- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[0]); -- -- /* No need configuring dummy EPs for the last one as it will never be used for -- bulk traffic (i == INVALD_EPID at this point). */ -- -- /* Set up to start on the last EP so we will enable it when inserting traffic -- for the first time (imitating the situation where the DMA has stopped -- because there was no more traffic). */ -- *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); -- /* No point in starting the bulk channel yet. -- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ -- DBFEXIT; --} -+/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. -+ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be -+ cache aligned. */ -+static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); -+static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); - --static void init_tx_ctrl_ep(void) --{ -- int i; -+/* Pointers into RxDescList. */ -+static volatile struct USB_IN_Desc *myNextRxDesc; -+static volatile struct USB_IN_Desc *myLastRxDesc; - -- DBFENTER; -+/* A zout transfer makes a memory access at the address of its buf pointer, -+ which means that setting this buf pointer to 0 will cause an access to the -+ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes -+ (depending on DMA burst size) transfer. -+ Instead, we set it to 1, and point it to this buffer. */ -+static int zout_buffer[4] __attribute__ ((aligned (4))); - -- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -- CHECK_ALIGN(&TxCtrlEPList[i]); -- TxCtrlEPList[i].hw_len = 0; -- TxCtrlEPList[i].command = IO_FIELD(USB_EP_command, epid, i); -- TxCtrlEPList[i].sub = 0; -- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[i + 1]); -- } -+/* Cache for allocating new EP and SB descriptors. */ -+static kmem_cache_t *usb_desc_cache; - -- CHECK_ALIGN(&TxCtrlEPList[i]); -- TxCtrlEPList[i].hw_len = 0; -- TxCtrlEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | -- IO_FIELD(USB_EP_command, epid, i)); -+/* Cache for the data allocated in the isoc descr top half. */ -+static kmem_cache_t *isoc_compl_cache; - -- TxCtrlEPList[i].sub = 0; -- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[0]); -+/* Cache for the data allocated when delayed finishing of URBs */ -+static kmem_cache_t *later_data_cache; - -- *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[0]); -- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); - -- DBFEXIT; -+/* Counter to keep track of how many Isoc EP we have sat up. Used to enable -+ and disable iso_eof interrupt. We only need these interrupts when we have -+ Isoc data endpoints (consumes CPU cycles). -+ FIXME: This could be more fine granular, so this interrupt is only enabled -+ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */ -+static int isoc_epid_counter; -+ -+/* Protecting wrapper functions for R_USB_EPT_x */ -+/* -------------------------------------------- */ -+static inline void etrax_epid_set(__u8 index, __u32 data) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ *R_USB_EPT_DATA = data; -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+} -+ -+static inline void etrax_epid_clear_error(__u8 index) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ *R_USB_EPT_DATA &= -+ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | -+ IO_MASK(R_USB_EPT_DATA, error_count_out) | -+ IO_MASK(R_USB_EPT_DATA, error_code)); -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+} -+ -+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, -+ __u8 toggle) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ if(dirout) { -+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); -+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); -+ } else { -+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); -+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); -+ } -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+} -+ -+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) { -+ unsigned long flags; -+ __u8 toggle; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ if (dirout) { -+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); -+ } else { -+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); -+ } -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+ return toggle; -+} -+ -+ -+static inline __u32 etrax_epid_get(__u8 index) { -+ unsigned long flags; -+ __u32 data; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ data = *R_USB_EPT_DATA; -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+ return data; -+} -+ -+ -+ -+ -+/* Main functions for Transfer Controller */ -+/* -------------------------------------- */ -+ -+/* Init structs, memories and lists used by Transfer Controller */ -+int tc_init(struct usb_hcd *hcd) { -+ int i; -+ /* Clear software state info for all epids */ -+ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS); -+ -+ /* Set Invalid and Dummy as being in use and disabled */ -+ epid_state[INVALID_EPID].inuse = 1; -+ epid_state[DUMMY_EPID].inuse = 1; -+ epid_state[INVALID_EPID].disabled = 1; -+ epid_state[DUMMY_EPID].disabled = 1; -+ -+ /* Clear counter for how many Isoc epids we have sat up */ -+ isoc_epid_counter = 0; -+ -+ /* Initialize the urb list by initiating a head for each list. -+ Also reset list hodling active URB for each epid */ -+ for (i = 0; i < NBR_OF_EPIDS; i++) { -+ INIT_LIST_HEAD(&urb_list[i]); -+ activeUrbList[i] = NULL; -+ } -+ -+ /* Init lock for URB lists */ -+ spin_lock_init(&urb_list_lock); -+ /* Init lock for Etrax R_USB_EPT register */ -+ spin_lock_init(&etrax_epid_lock); -+ /* Init lock for Etrax dma8 sub0 handling */ -+ spin_lock_init(&etrax_dma8_sub0_lock); -+ -+ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ -+ -+ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also -+ allocate SB descriptors from this cache. This is ok since -+ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */ -+ usb_desc_cache = kmem_cache_create("usb_desc_cache", -+ sizeof(struct USB_EP_Desc), 0, -+ SLAB_HWCACHE_ALIGN, 0, 0); -+ if(usb_desc_cache == NULL) { -+ return -ENOMEM; -+ } -+ -+ /* Create slab cache for speedy allocation of memory for isoc bottom-half -+ interrupt handling */ -+ isoc_compl_cache = -+ kmem_cache_create("isoc_compl_cache", -+ sizeof(struct crisv10_isoc_complete_data), -+ 0, SLAB_HWCACHE_ALIGN, 0, 0); -+ if(isoc_compl_cache == NULL) { -+ return -ENOMEM; -+ } -+ -+ /* Create slab cache for speedy allocation of memory for later URB finish -+ struct */ -+ later_data_cache = -+ kmem_cache_create("later_data_cache", -+ sizeof(struct urb_later_data), -+ 0, SLAB_HWCACHE_ALIGN, 0, 0); -+ if(later_data_cache == NULL) { -+ return -ENOMEM; -+ } -+ -+ -+ /* Initiate the bulk start timer. */ -+ init_timer(&bulk_start_timer); -+ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; -+ bulk_start_timer.function = tc_bulk_start_timer_func; -+ add_timer(&bulk_start_timer); -+ -+ -+ /* Initiate the bulk eot timer. */ -+ init_timer(&bulk_eot_timer); -+ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; -+ bulk_eot_timer.function = tc_bulk_eot_timer_func; -+ bulk_eot_timer.data = (unsigned long)hcd; -+ add_timer(&bulk_eot_timer); -+ -+ return 0; -+} -+ -+/* Uninitialize all resources used by Transfer Controller */ -+void tc_destroy(void) { -+ -+ /* Destroy all slab cache */ -+ kmem_cache_destroy(usb_desc_cache); -+ kmem_cache_destroy(isoc_compl_cache); -+ kmem_cache_destroy(later_data_cache); -+ -+ /* Remove timers */ -+ del_timer(&bulk_start_timer); -+ del_timer(&bulk_eot_timer); -+} -+ -+static void restart_dma8_sub0(void) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags); -+ /* Verify that the dma is not running */ -+ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) { -+ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP); -+ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) { -+ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next); -+ } -+ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID. -+ * ep->next is already a physical address; no need for a virt_to_phys. */ -+ *R_DMA_CH8_SUB0_EP = ep->next; -+ /* Restart the DMA */ -+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); -+ } -+ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags); -+} -+ -+/* queue an URB with the transfer controller (called from hcd_driver) */ -+static int tc_urb_enqueue(struct usb_hcd *hcd, -+ struct usb_host_endpoint *ep, -+ struct urb *urb, -+ gfp_t mem_flags) { -+ int epid; -+ int retval; -+ int bustime = 0; -+ int maxpacket; -+ unsigned long flags; -+ struct crisv10_urb_priv *urb_priv; -+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ DBFENTER; -+ -+ if(!(crisv10_hcd->running)) { -+ /* The USB Controller is not running, probably because no device is -+ attached. No idea to enqueue URBs then */ -+ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n", -+ (unsigned int)urb); -+ return -ENOENT; -+ } -+ -+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -+ /* Special case check for In Isoc transfers. Specification states that each -+ In Isoc transfer consists of one packet and therefore it should fit into -+ the transfer-buffer of an URB. -+ We do the check here to be sure (an invalid scenario can be produced with -+ parameters to the usbtest suite) */ -+ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) && -+ (urb->transfer_buffer_length < maxpacket)) { -+ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket); -+ return -EMSGSIZE; -+ } -+ -+ /* Check if there is enough bandwidth for periodic transfer */ -+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) { -+ /* only check (and later claim) if not already claimed */ -+ if (urb->bandwidth == 0) { -+ bustime = usb_check_bandwidth(urb->dev, urb); -+ if (bustime < 0) { -+ tc_err("Not enough periodic bandwidth\n"); -+ return -ENOSPC; -+ } -+ } -+ } -+ -+ /* Check if there is a epid for URBs destination, if not this function -+ set up one. */ -+ epid = tc_setup_epid(ep, urb, mem_flags); -+ if (epid < 0) { -+ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb); -+ DBFEXIT; -+ return -ENOMEM; -+ } -+ -+ if(urb == activeUrbList[epid]) { -+ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb); -+ return -ENXIO; -+ } -+ -+ if(urb_list_entry(urb, epid)) { -+ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb); -+ return -ENXIO; -+ } -+ -+ /* If we actively have flaged endpoint as disabled then refuse submition */ -+ if(epid_state[epid].disabled) { -+ return -ENOENT; -+ } -+ -+ /* Allocate and init HC-private data for URB */ -+ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) { -+ DBFEXIT; -+ return -ENOMEM; -+ } -+ urb_priv = urb->hcpriv; -+ -+ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n", -+ (unsigned int)urb, urb_priv->urb_num, epid, -+ pipe_to_str(urb->pipe), urb->transfer_buffer_length); -+ -+ /* Create and link SBs required for this URB */ -+ retval = create_sb_for_urb(urb, mem_flags); -+ if(retval != 0) { -+ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb, -+ urb_priv->urb_num); -+ urb_priv_free(hcd, urb); -+ DBFEXIT; -+ return retval; -+ } -+ -+ /* Init intr EP pool if this URB is a INTR transfer. This pool is later -+ used when inserting EPs in the TxIntrEPList. We do the alloc here -+ so we can't run out of memory later */ -+ if(usb_pipeint(urb->pipe)) { -+ retval = init_intr_urb(urb, mem_flags); -+ if(retval != 0) { -+ tc_warn("Failed to init Intr URB\n"); -+ urb_priv_free(hcd, urb); -+ DBFEXIT; -+ return retval; -+ } -+ } -+ -+ /* Disable other access when inserting USB */ -+ local_irq_save(flags); -+ -+ /* Claim bandwidth, if needed */ -+ if(bustime) { -+ usb_claim_bandwidth(urb->dev, urb, bustime, 0); -+ } -+ -+ /* Add URB to EP queue */ -+ urb_list_add(urb, epid, mem_flags); -+ -+ if(usb_pipeisoc(urb->pipe)) { -+ /* Special processing of Isoc URBs. */ -+ tc_dma_process_isoc_urb(urb); -+ } else { -+ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */ -+ tc_dma_process_queue(epid); -+ } -+ -+ local_irq_restore(flags); -+ -+ DBFEXIT; -+ return 0; -+} -+ -+/* remove an URB from the transfer controller queues (called from hcd_driver)*/ -+static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) { -+ struct crisv10_urb_priv *urb_priv; -+ unsigned long flags; -+ int epid; -+ -+ DBFENTER; -+ /* Disable interrupts here since a descriptor interrupt for the isoc epid -+ will modify the sb list. This could possibly be done more granular, but -+ urb_dequeue should not be used frequently anyway. -+ */ -+ local_irq_save(flags); -+ -+ urb_priv = urb->hcpriv; -+ -+ if (!urb_priv) { -+ /* This happens if a device driver calls unlink on an urb that -+ was never submitted (lazy driver) or if the urb was completed -+ while dequeue was being called. */ -+ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb); -+ local_irq_restore(flags); -+ return 0; -+ } -+ epid = urb_priv->epid; -+ -+ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", -+ (urb == activeUrbList[epid]) ? "active" : "queued", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), epid, urb->status, -+ (urb_priv->later_data) ? "later-sched" : ""); -+ -+ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB -+ that isn't active can be dequeued by just removing it from the queue */ -+ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) || -+ usb_pipeint(urb->pipe)) { -+ -+ /* Check if URB haven't gone further than the queue */ -+ if(urb != activeUrbList[epid]) { -+ ASSERT(urb_priv->later_data == NULL); -+ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue" -+ " (not active)\n", (unsigned int)urb, urb_priv->urb_num, -+ str_dir(urb->pipe), str_type(urb->pipe), epid); -+ -+ /* Finish the URB with error status from USB core */ -+ tc_finish_urb(hcd, urb, urb->status); -+ local_irq_restore(flags); -+ return 0; -+ } -+ } -+ -+ /* Set URB status to Unlink for handling when interrupt comes. */ -+ urb_priv->urb_state = UNLINK; -+ -+ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */ -+ switch(usb_pipetype(urb->pipe)) { -+ case PIPE_BULK: -+ /* Check if EP still is enabled */ -+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ /* Kicking dummy list out of the party. */ -+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); -+ break; -+ case PIPE_CONTROL: -+ /* Check if EP still is enabled */ -+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ break; -+ case PIPE_ISOCHRONOUS: -+ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in -+ finish_isoc_urb(). Because there might the case when URB is dequeued -+ but there are other valid URBs waiting */ -+ -+ /* Check if In Isoc EP still is enabled */ -+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ break; -+ case PIPE_INTERRUPT: -+ /* Special care is taken for interrupt URBs. EPs are unlinked in -+ tc_finish_urb */ -+ break; -+ default: -+ break; -+ } -+ -+ /* Asynchronous unlink, finish the URB later from scheduled or other -+ event (data finished, error) */ -+ tc_finish_urb_later(hcd, urb, urb->status); -+ -+ local_irq_restore(flags); -+ DBFEXIT; -+ return 0; -+} -+ -+ -+static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) { -+ volatile int timeout = 10000; -+ struct urb* urb; -+ struct crisv10_urb_priv* urb_priv; -+ unsigned long flags; -+ -+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ -+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ -+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ -+ -+ int type = epid_state[epid].type; -+ -+ /* Setting this flag will cause enqueue() to return -ENOENT for new -+ submitions on this endpoint and finish_urb() wont process queue further */ -+ epid_state[epid].disabled = 1; -+ -+ switch(type) { -+ case PIPE_BULK: -+ /* Check if EP still is enabled */ -+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); -+ -+ /* Do busy-wait until DMA not using this EP descriptor anymore */ -+ while((*R_DMA_CH8_SUB0_EP == -+ virt_to_phys(&TxBulkEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for" -+ " epid:%d\n", epid); -+ } -+ } -+ break; -+ -+ case PIPE_CONTROL: -+ /* Check if EP still is enabled */ -+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); -+ -+ /* Do busy-wait until DMA not using this EP descriptor anymore */ -+ while((*R_DMA_CH8_SUB1_EP == -+ virt_to_phys(&TxCtrlEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for" -+ " epid:%d\n", epid); -+ } -+ } -+ break; -+ -+ case PIPE_INTERRUPT: -+ local_irq_save(flags); -+ /* Disable all Intr EPs belonging to epid */ -+ first_ep = &TxIntrEPList[0]; -+ curr_ep = first_ep; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -+ /* Disable EP */ -+ next_ep->command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != first_ep); -+ -+ local_irq_restore(flags); -+ break; -+ -+ case PIPE_ISOCHRONOUS: -+ /* Check if EP still is enabled */ -+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid); -+ /* The EP was enabled, disable it. */ -+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ -+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for" -+ " epid:%d\n", epid); -+ } -+ } -+ break; -+ } -+ -+ local_irq_save(flags); -+ -+ /* Finish if there is active URB for this endpoint */ -+ if(activeUrbList[epid] != NULL) { -+ urb = activeUrbList[epid]; -+ urb_priv = urb->hcpriv; -+ ASSERT(urb_priv); -+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", -+ (urb == activeUrbList[epid]) ? "active" : "queued", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), epid, urb->status, -+ (urb_priv->later_data) ? "later-sched" : ""); -+ -+ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT); -+ ASSERT(activeUrbList[epid] == NULL); -+ } -+ -+ /* Finish any queued URBs for this endpoint. There won't be any resubmitions -+ because epid_disabled causes enqueue() to fail for this endpoint */ -+ while((urb = urb_list_first(epid)) != NULL) { -+ urb_priv = urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", -+ (urb == activeUrbList[epid]) ? "active" : "queued", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), epid, urb->status, -+ (urb_priv->later_data) ? "later-sched" : ""); -+ -+ tc_finish_urb(hcd, urb, -ENOENT); -+ } -+ epid_state[epid].disabled = 0; -+ local_irq_restore(flags); -+} -+ -+/* free resources associated with an endpoint (called from hcd_driver) */ -+static void tc_endpoint_disable(struct usb_hcd *hcd, -+ struct usb_host_endpoint *ep) { -+ DBFENTER; -+ /* Only free epid if it has been allocated. We get two endpoint_disable -+ requests for ctrl endpoints so ignore the second one */ -+ if(ep->hcpriv != NULL) { -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ int epid = ep_priv->epid; -+ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n", -+ (unsigned int)ep, (unsigned int)ep->hcpriv, -+ endpoint_to_str(&(ep->desc)), epid); -+ -+ tc_sync_finish_epid(hcd, epid); -+ -+ ASSERT(activeUrbList[epid] == NULL); -+ ASSERT(list_empty(&urb_list[epid])); -+ -+ tc_free_epid(ep); -+ } else { -+ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep, -+ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc))); -+ } -+ DBFEXIT; -+} -+ -+static void tc_finish_urb_later_proc(void *data) { -+ unsigned long flags; -+ struct urb_later_data* uld = (struct urb_later_data*)data; -+ local_irq_save(flags); -+ if(uld->urb == NULL) { -+ late_dbg("Later finish of URB = NULL (allready finished)\n"); -+ } else { -+ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv; -+ ASSERT(urb_priv); -+ if(urb_priv->urb_num == uld->urb_num) { -+ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb), -+ urb_priv->urb_num); -+ if(uld->status != uld->urb->status) { -+ errno_dbg("Later-finish URB with status:%d, later-status:%d\n", -+ uld->urb->status, uld->status); -+ } -+ if(uld != urb_priv->later_data) { -+ panic("Scheduled uld not same as URBs uld\n"); -+ } -+ tc_finish_urb(uld->hcd, uld->urb, uld->status); -+ } else { -+ late_warn("Ignoring later finish of URB:0x%x[%d]" -+ ", urb_num doesn't match current URB:0x%x[%d]", -+ (unsigned int)(uld->urb), uld->urb_num, -+ (unsigned int)(uld->urb), urb_priv->urb_num); -+ } -+ } -+ local_irq_restore(flags); -+ kmem_cache_free(later_data_cache, uld); -+} -+ -+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, -+ int status) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ struct urb_later_data* uld; -+ -+ ASSERT(urb_priv); -+ -+ if(urb_priv->later_data != NULL) { -+ /* Later-finish allready scheduled for this URB, just update status to -+ return when finishing later */ -+ errno_dbg("Later-finish schedule change URB status:%d with new" -+ " status:%d\n", urb_priv->later_data->status, status); -+ -+ urb_priv->later_data->status = status; -+ return; -+ } -+ -+ uld = kmem_cache_alloc(later_data_cache, SLAB_ATOMIC); -+ ASSERT(uld); -+ -+ uld->hcd = hcd; -+ uld->urb = urb; -+ uld->urb_num = urb_priv->urb_num; -+ uld->status = status; -+ -+ INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld); -+ urb_priv->later_data = uld; -+ -+ /* Schedule the finishing of the URB to happen later */ -+ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY); -+} -+ -+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, -+ int status); -+ -+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) { -+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ int epid; -+ char toggle; -+ int urb_num; -+ -+ DBFENTER; -+ ASSERT(urb_priv != NULL); -+ epid = urb_priv->epid; -+ urb_num = urb_priv->urb_num; -+ -+ if(urb != activeUrbList[epid]) { -+ if(urb_list_entry(urb, epid)) { -+ /* Remove this URB from the list. Only happens when URB are finished -+ before having been processed (dequeing) */ -+ urb_list_del(urb, epid); -+ } else { -+ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for" -+ " epid:%d\n", (unsigned int)urb, urb_num, epid); -+ } -+ } -+ -+ /* Cancel any pending later-finish of this URB */ -+ if(urb_priv->later_data) { -+ urb_priv->later_data->urb = NULL; -+ } -+ -+ /* For an IN pipe, we always set the actual length, regardless of whether -+ there was an error or not (which means the device driver can use the data -+ if it wants to). */ -+ if(usb_pipein(urb->pipe)) { -+ urb->actual_length = urb_priv->rx_offset; -+ } else { -+ /* Set actual_length for OUT urbs also; the USB mass storage driver seems -+ to want that. */ -+ if (status == 0 && urb->status == -EINPROGRESS) { -+ urb->actual_length = urb->transfer_buffer_length; -+ } else { -+ /* We wouldn't know of any partial writes if there was an error. */ -+ urb->actual_length = 0; -+ } -+ } -+ -+ -+ /* URB status mangling */ -+ if(urb->status == -EINPROGRESS) { -+ /* The USB core hasn't changed the status, let's set our finish status */ -+ urb->status = status; -+ -+ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) && -+ usb_pipein(urb->pipe) && -+ (urb->actual_length != urb->transfer_buffer_length)) { -+ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's -+ max length) is to be treated as an error. */ -+ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short" -+ " data:%d\n", (unsigned int)urb, urb_num, -+ urb->actual_length); -+ urb->status = -EREMOTEIO; -+ } -+ -+ if(urb_priv->urb_state == UNLINK) { -+ /* URB has been requested to be unlinked asynchronously */ -+ urb->status = -ECONNRESET; -+ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n", -+ (unsigned int)urb, urb_num, urb->status); -+ } -+ } else { -+ /* The USB Core wants to signal some error via the URB, pass it through */ -+ } -+ -+ /* use completely different finish function for Isoc URBs */ -+ if(usb_pipeisoc(urb->pipe)) { -+ tc_finish_isoc_urb(hcd, urb, status); -+ return; -+ } -+ -+ /* Do special unlinking of EPs for Intr traffic */ -+ if(usb_pipeint(urb->pipe)) { -+ tc_dma_unlink_intr_urb(urb); -+ } -+ -+ /* Release allocated bandwidth for periodic transfers */ -+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) -+ usb_release_bandwidth(urb->dev, urb, 0); -+ -+ /* This URB is active on EP */ -+ if(urb == activeUrbList[epid]) { -+ /* We need to fiddle with the toggle bits because the hardware doesn't do -+ it for us. */ -+ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe)); -+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), -+ usb_pipeout(urb->pipe), toggle); -+ -+ /* Checks for Ctrl and Bulk EPs */ -+ switch(usb_pipetype(urb->pipe)) { -+ case PIPE_BULK: -+ /* Check so Bulk EP realy is disabled before finishing active URB */ -+ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) == -+ IO_STATE(USB_EP_command, enable, no)); -+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to -+ process Bulk EP. */ -+ TxBulkEPList[epid].sub = 0; -+ /* No need to wait for the DMA before changing the next pointer. -+ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use -+ the last one (INVALID_EPID) for actual traffic. */ -+ TxBulkEPList[epid].next = -+ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); -+ break; -+ case PIPE_CONTROL: -+ /* Check so Ctrl EP realy is disabled before finishing active URB */ -+ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) == -+ IO_STATE(USB_EP_command, enable, no)); -+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to -+ process Ctrl EP. */ -+ TxCtrlEPList[epid].sub = 0; -+ break; -+ } -+ } -+ -+ /* Free HC-private URB data*/ -+ urb_priv_free(hcd, urb); -+ -+ if(urb->status) { -+ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", -+ (unsigned int)urb, urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb->actual_length, urb->status); -+ } else { -+ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", -+ (unsigned int)urb, urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb->actual_length, urb->status); -+ } -+ -+ /* If we just finished an active URB, clear active pointer. */ -+ if (urb == activeUrbList[epid]) { -+ /* Make URB not active on EP anymore */ -+ activeUrbList[epid] = NULL; -+ -+ if(urb->status == 0) { -+ /* URB finished sucessfully, process queue to see if there are any more -+ URBs waiting before we call completion function.*/ -+ if(crisv10_hcd->running) { -+ /* Only process queue if USB controller is running */ -+ tc_dma_process_queue(epid); -+ } else { -+ tc_warn("No processing of queue for epid:%d, USB Controller not" -+ " running\n", epid); -+ } -+ } -+ } -+ -+ /* Hand the URB from HCD to its USB device driver, using its completion -+ functions */ -+ usb_hcd_giveback_urb (hcd, urb); -+ -+ /* Check the queue once more if the URB returned with error, because we -+ didn't do it before the completion function because the specification -+ states that the queue should not restart until all it's unlinked -+ URBs have been fully retired, with the completion functions run */ -+ if(crisv10_hcd->running) { -+ /* Only process queue if USB controller is running */ -+ tc_dma_process_queue(epid); -+ } else { -+ tc_warn("No processing of queue for epid:%d, USB Controller not running\n", -+ epid); -+ } -+ -+ DBFEXIT; -+} -+ -+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, -+ int status) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ int epid, i; -+ volatile int timeout = 10000; -+ -+ ASSERT(urb_priv); -+ epid = urb_priv->epid; -+ -+ ASSERT(usb_pipeisoc(urb->pipe)); -+ -+ /* Set that all isoc packets have status and length set before -+ completing the urb. */ -+ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){ -+ urb->iso_frame_desc[i].actual_length = 0; -+ urb->iso_frame_desc[i].status = -EPROTO; -+ } -+ -+ /* Check if the URB is currently active (done or error) */ -+ if(urb == activeUrbList[epid]) { -+ /* Check if there are another In Isoc URB queued for this epid */ -+ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) { -+ /* Move it from queue to active and mark it started so Isoc transfers -+ won't be interrupted. -+ All Isoc URBs data transfers are already added to DMA lists so we -+ don't have to insert anything in DMA lists here. */ -+ activeUrbList[epid] = urb_list_first(epid); -+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state = -+ STARTED; -+ urb_list_del(activeUrbList[epid], epid); -+ -+ if(urb->status) { -+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" -+ " status:%d, new waiting URB:0x%x[%d]\n", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb_priv->isoc_packet_counter, -+ urb->number_of_packets, urb->status, -+ (unsigned int)activeUrbList[epid], -+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num); -+ } -+ -+ } else { /* No other URB queued for this epid */ -+ if(urb->status) { -+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" -+ " status:%d, no new URB waiting\n", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb_priv->isoc_packet_counter, -+ urb->number_of_packets, urb->status); -+ } -+ -+ /* Check if EP is still enabled, then shut it down. */ -+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid); -+ -+ /* Should only occur for In Isoc EPs where SB isn't consumed. */ -+ ASSERT(usb_pipein(urb->pipe)); -+ -+ /* Disable it and wait for it to stop */ -+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ -+ /* Ah, the luxury of busy-wait. */ -+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid); -+ } -+ } -+ -+ /* Unlink SB to say that epid is finished. */ -+ TxIsocEPList[epid].sub = 0; -+ TxIsocEPList[epid].hw_len = 0; -+ -+ /* No URB active for EP anymore */ -+ activeUrbList[epid] = NULL; -+ } -+ } else { /* Finishing of not active URB (queued up with SBs thought) */ -+ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d," -+ " SB queued but not active\n", -+ (unsigned int)urb, str_dir(urb->pipe), -+ urb_priv->isoc_packet_counter, urb->number_of_packets, -+ urb->status); -+ if(usb_pipeout(urb->pipe)) { -+ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */ -+ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb; -+ -+ iter_sb = TxIsocEPList[epid].sub ? -+ phys_to_virt(TxIsocEPList[epid].sub) : 0; -+ prev_sb = 0; -+ -+ /* SB that is linked before this URBs first SB */ -+ while (iter_sb && (iter_sb != urb_priv->first_sb)) { -+ prev_sb = iter_sb; -+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -+ } -+ -+ if (iter_sb == 0) { -+ /* Unlink of the URB currently being transmitted. */ -+ prev_sb = 0; -+ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; -+ } -+ -+ while (iter_sb && (iter_sb != urb_priv->last_sb)) { -+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -+ } -+ -+ if (iter_sb) { -+ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -+ } else { -+ /* This should only happen if the DMA has completed -+ processing the SB list for this EP while interrupts -+ are disabled. */ -+ isoc_dbg("Isoc urb not found, already sent?\n"); -+ next_sb = 0; -+ } -+ if (prev_sb) { -+ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; -+ } else { -+ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; -+ } -+ } -+ } -+ -+ /* Free HC-private URB data*/ -+ urb_priv_free(hcd, urb); -+ -+ usb_release_bandwidth(urb->dev, urb, 0); -+ -+ /* Hand the URB from HCD to its USB device driver, using its completion -+ functions */ -+ usb_hcd_giveback_urb (hcd, urb); -+} -+ -+static __u32 urb_num = 0; -+ -+/* allocate and initialize URB private data */ -+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, -+ int mem_flags) { -+ struct crisv10_urb_priv *urb_priv; -+ -+ urb_priv = kmalloc(sizeof *urb_priv, mem_flags); -+ if (!urb_priv) -+ return -ENOMEM; -+ memset(urb_priv, 0, sizeof *urb_priv); -+ -+ urb_priv->epid = epid; -+ urb_priv->urb_state = NOT_STARTED; -+ -+ urb->hcpriv = urb_priv; -+ /* Assign URB a sequence number, and increment counter */ -+ urb_priv->urb_num = urb_num; -+ urb_num++; -+ return 0; -+} -+ -+/* free URB private data */ -+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) { -+ int i; -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ ASSERT(urb_priv != 0); -+ -+ /* Check it has any SBs linked that needs to be freed*/ -+ if(urb_priv->first_sb != NULL) { -+ struct USB_SB_Desc *next_sb, *first_sb, *last_sb; -+ int i = 0; -+ first_sb = urb_priv->first_sb; -+ last_sb = urb_priv->last_sb; -+ ASSERT(last_sb); -+ while(first_sb != last_sb) { -+ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next); -+ kmem_cache_free(usb_desc_cache, first_sb); -+ first_sb = next_sb; -+ i++; -+ } -+ kmem_cache_free(usb_desc_cache, last_sb); -+ i++; -+ } -+ -+ /* Check if it has any EPs in its Intr pool that also needs to be freed */ -+ if(urb_priv->intr_ep_pool_length > 0) { -+ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) { -+ kfree(urb_priv->intr_ep_pool[i]); -+ } -+ /* -+ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n", -+ urb_priv->intr_ep_pool_length, (unsigned int)urb); -+ */ -+ } -+ -+ kfree(urb_priv); -+ urb->hcpriv = NULL; -+} -+ -+static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) { -+ struct crisv10_ep_priv *ep_priv; -+ -+ ep_priv = kmalloc(sizeof *ep_priv, mem_flags); -+ if (!ep_priv) -+ return -ENOMEM; -+ memset(ep_priv, 0, sizeof *ep_priv); -+ -+ ep->hcpriv = ep_priv; -+ return 0; -+} -+ -+static void ep_priv_free(struct usb_host_endpoint *ep) { -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ ASSERT(ep_priv); -+ kfree(ep_priv); -+ ep->hcpriv = NULL; -+} -+ -+/* EPID handling functions, managing EP-list in Etrax through wrappers */ -+/* ------------------------------------------------------------------- */ -+ -+/* Sets up a new EPID for an endpoint or returns existing if found */ -+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, -+ int mem_flags) { -+ int epid; -+ char devnum, endpoint, out_traffic, slow; -+ int maxlen; -+ __u32 epid_data; -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ -+ DBFENTER; -+ -+ /* Check if a valid epid already is setup for this endpoint */ -+ if(ep_priv != NULL) { -+ return ep_priv->epid; -+ } -+ -+ /* We must find and initiate a new epid for this urb. */ -+ epid = tc_allocate_epid(); -+ -+ if (epid == -1) { -+ /* Failed to allocate a new epid. */ -+ DBFEXIT; -+ return epid; -+ } -+ -+ /* We now have a new epid to use. Claim it. */ -+ epid_state[epid].inuse = 1; -+ -+ /* Init private data for new endpoint */ -+ if(ep_priv_create(ep, mem_flags) != 0) { -+ return -ENOMEM; -+ } -+ ep_priv = ep->hcpriv; -+ ep_priv->epid = epid; -+ -+ devnum = usb_pipedevice(urb->pipe); -+ endpoint = usb_pipeendpoint(urb->pipe); -+ slow = (urb->dev->speed == USB_SPEED_LOW); -+ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -+ -+ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { -+ /* We want both IN and OUT control traffic to be put on the same -+ EP/SB list. */ -+ out_traffic = 1; -+ } else { -+ out_traffic = usb_pipeout(urb->pipe); -+ } -+ -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | -+ /* FIXME: Change any to the actual port? */ -+ IO_STATE(R_USB_EPT_DATA_ISO, port, any) | -+ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | -+ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | -+ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); -+ etrax_epid_iso_set(epid, epid_data); -+ } else { -+ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) | -+ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | -+ /* FIXME: Change any to the actual port? */ -+ IO_STATE(R_USB_EPT_DATA, port, any) | -+ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | -+ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | -+ IO_FIELD(R_USB_EPT_DATA, dev, devnum); -+ etrax_epid_set(epid, epid_data); -+ } -+ -+ epid_state[epid].out_traffic = out_traffic; -+ epid_state[epid].type = usb_pipetype(urb->pipe); -+ -+ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n", -+ (unsigned int)ep, epid, devnum, endpoint, maxlen, -+ str_type(urb->pipe), out_traffic ? "out" : "in", -+ slow ? "low" : "full"); -+ -+ /* Enable Isoc eof interrupt if we set up the first Isoc epid */ -+ if(usb_pipeisoc(urb->pipe)) { -+ isoc_epid_counter++; -+ if(isoc_epid_counter == 1) { -+ isoc_warn("Enabled Isoc eof interrupt\n"); -+ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); -+ } -+ } -+ -+ DBFEXIT; -+ return epid; -+} -+ -+static void tc_free_epid(struct usb_host_endpoint *ep) { -+ unsigned long flags; -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ int epid; -+ volatile int timeout = 10000; -+ -+ DBFENTER; -+ -+ if (ep_priv == NULL) { -+ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep); -+ DBFEXIT; -+ return; -+ } -+ -+ epid = ep_priv->epid; -+ -+ /* Disable Isoc eof interrupt if we free the last Isoc epid */ -+ if(epid_isoc(epid)) { -+ ASSERT(isoc_epid_counter > 0); -+ isoc_epid_counter--; -+ if(isoc_epid_counter == 0) { -+ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); -+ isoc_warn("Disabled Isoc eof interrupt\n"); -+ } -+ } -+ -+ /* Take lock manualy instead of in epid_x_x wrappers, -+ because we need to be polling here */ -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -+ nop(); -+ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for epid:%d to drop hold\n", epid); -+ } -+ /* This will, among other things, set the valid field to 0. */ -+ *R_USB_EPT_DATA = 0; -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+ -+ /* Free resource in software state info list */ -+ epid_state[epid].inuse = 0; -+ -+ /* Free private endpoint data */ -+ ep_priv_free(ep); -+ -+ DBFEXIT; -+} -+ -+static int tc_allocate_epid(void) { -+ int i; -+ DBFENTER; -+ for (i = 0; i < NBR_OF_EPIDS; i++) { -+ if (!epid_inuse(i)) { -+ DBFEXIT; -+ return i; -+ } -+ } -+ -+ tc_warn("Found no free epids\n"); -+ DBFEXIT; -+ return -1; - } - - --static void init_tx_intr_ep(void) --{ -- int i; -+/* Wrappers around the list functions (include/linux/list.h). */ -+/* ---------------------------------------------------------- */ -+static inline int __urb_list_empty(int epid) { -+ int retval; -+ retval = list_empty(&urb_list[epid]); -+ return retval; -+} - -- DBFENTER; -+/* Returns first urb for this epid, or NULL if list is empty. */ -+static inline struct urb *urb_list_first(int epid) { -+ unsigned long flags; -+ struct urb *first_urb = 0; -+ spin_lock_irqsave(&urb_list_lock, flags); -+ if (!__urb_list_empty(epid)) { -+ /* Get the first urb (i.e. head->next). */ -+ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); -+ first_urb = urb_entry->urb; -+ } -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return first_urb; -+} - -- /* Read comment at zout_buffer declaration for an explanation to this. */ -- TxIntrSB_zout.sw_len = 1; -- TxIntrSB_zout.next = 0; -- TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); -- TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | -- IO_STATE(USB_SB_command, tt, zout) | -- IO_STATE(USB_SB_command, full, yes) | -- IO_STATE(USB_SB_command, eot, yes) | -- IO_STATE(USB_SB_command, eol, yes)); -- -- for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { -- CHECK_ALIGN(&TxIntrEPList[i]); -- TxIntrEPList[i].hw_len = 0; -- TxIntrEPList[i].command = -- (IO_STATE(USB_EP_command, eof, yes) | -- IO_STATE(USB_EP_command, enable, yes) | -- IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); -- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); -- } -+/* Adds an urb_entry last in the list for this epid. */ -+static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) { -+ unsigned long flags; -+ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags); -+ ASSERT(urb_entry); -+ -+ urb_entry->urb = urb; -+ spin_lock_irqsave(&urb_list_lock, flags); -+ list_add_tail(&urb_entry->list, &urb_list[epid]); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+} - -- CHECK_ALIGN(&TxIntrEPList[i]); -- TxIntrEPList[i].hw_len = 0; -- TxIntrEPList[i].command = -- (IO_STATE(USB_EP_command, eof, yes) | -- IO_STATE(USB_EP_command, eol, yes) | -- IO_STATE(USB_EP_command, enable, yes) | -- IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); -- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); -- -- *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); -- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); -- DBFEXIT; -+/* Search through the list for an element that contains this urb. (The list -+ is expected to be short and the one we are about to delete will often be -+ the first in the list.) -+ Should be protected by spin_locks in calling function */ -+static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) { -+ struct list_head *entry; -+ struct list_head *tmp; -+ urb_entry_t *urb_entry; -+ -+ list_for_each_safe(entry, tmp, &urb_list[epid]) { -+ urb_entry = list_entry(entry, urb_entry_t, list); -+ ASSERT(urb_entry); -+ ASSERT(urb_entry->urb); -+ -+ if (urb_entry->urb == urb) { -+ return urb_entry; -+ } -+ } -+ return 0; -+} -+ -+/* Same function as above but for global use. Protects list by spinlock */ -+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return (urb_entry); - } - --static void init_tx_isoc_ep(void) --{ -- int i; -+/* Delete an urb from the list. */ -+static inline void urb_list_del(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ -+ /* Delete entry and free. */ -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ ASSERT(urb_entry); -+ -+ list_del(&urb_entry->list); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ kfree(urb_entry); -+} - -- DBFENTER; -+/* Move an urb to the end of the list. */ -+static inline void urb_list_move_last(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ ASSERT(urb_entry); -+ -+ list_del(&urb_entry->list); -+ list_add_tail(&urb_entry->list, &urb_list[epid]); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+} - -- /* Read comment at zout_buffer declaration for an explanation to this. */ -- TxIsocSB_zout.sw_len = 1; -- TxIsocSB_zout.next = 0; -- TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); -- TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | -- IO_STATE(USB_SB_command, tt, zout) | -- IO_STATE(USB_SB_command, full, yes) | -- IO_STATE(USB_SB_command, eot, yes) | -- IO_STATE(USB_SB_command, eol, yes)); -- -- /* The last isochronous EP descriptor is a dummy. */ -- -- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -- CHECK_ALIGN(&TxIsocEPList[i]); -- TxIsocEPList[i].hw_len = 0; -- TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); -- TxIsocEPList[i].sub = 0; -- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); -+/* Get the next urb in the list. */ -+static inline struct urb *urb_list_next(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ ASSERT(urb_entry); -+ -+ if (urb_entry->list.next != &urb_list[epid]) { -+ struct list_head *elem = urb_entry->list.next; -+ urb_entry = list_entry(elem, urb_entry_t, list); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return urb_entry->urb; -+ } else { -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return NULL; -+ } -+} -+ -+struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc, -+ int mem_flags) { -+ struct USB_EP_Desc *ep_desc; -+ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags); -+ if(ep_desc == NULL) -+ return NULL; -+ memset(ep_desc, 0, sizeof(struct USB_EP_Desc)); -+ -+ ep_desc->hw_len = 0; -+ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | -+ IO_STATE(USB_EP_command, enable, yes)); -+ if(sb_desc == NULL) { -+ ep_desc->sub = 0; -+ } else { -+ ep_desc->sub = virt_to_phys(sb_desc); -+ } -+ return ep_desc; -+} -+ -+#define TT_ZOUT 0 -+#define TT_IN 1 -+#define TT_OUT 2 -+#define TT_SETUP 3 -+ -+#define CMD_EOL IO_STATE(USB_SB_command, eol, yes) -+#define CMD_INTR IO_STATE(USB_SB_command, intr, yes) -+#define CMD_FULL IO_STATE(USB_SB_command, full, yes) -+ -+/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT -+ SBs. Also used by create_sb_in() to avoid same allocation procedure at two -+ places */ -+struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data, -+ int datalen, int mem_flags) { -+ struct USB_SB_Desc *sb_desc; -+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); -+ if(sb_desc == NULL) -+ return NULL; -+ memset(sb_desc, 0, sizeof(struct USB_SB_Desc)); -+ -+ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) | -+ IO_STATE(USB_SB_command, eot, yes); -+ -+ sb_desc->sw_len = datalen; -+ if(data != NULL) { -+ sb_desc->buf = virt_to_phys(data); -+ } else { -+ sb_desc->buf = 0; -+ } -+ if(sb_prev != NULL) { -+ sb_prev->next = virt_to_phys(sb_desc); -+ } -+ return sb_desc; -+} -+ -+/* Creates a copy of an existing SB by allocation space for it and copy -+ settings */ -+struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) { -+ struct USB_SB_Desc *sb_desc; -+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); -+ if(sb_desc == NULL) -+ return NULL; -+ -+ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc)); -+ return sb_desc; -+} -+ -+/* A specific create_sb function for creation of in SBs. This is due to -+ that datalen in In SBs shows how many packets we are expecting. It also -+ sets up the rem field to show if how many bytes we expect in last packet -+ if it's not a full one */ -+struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen, -+ int maxlen, int mem_flags) { -+ struct USB_SB_Desc *sb_desc; -+ sb_desc = create_sb(sb_prev, TT_IN, NULL, -+ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags); -+ if(sb_desc == NULL) -+ return NULL; -+ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen); -+ return sb_desc; -+} -+ -+void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) { -+ sb_desc->command |= flags; -+} -+ -+int create_sb_for_urb(struct urb *urb, int mem_flags) { -+ int is_out = !usb_pipein(urb->pipe); -+ int type = usb_pipetype(urb->pipe); -+ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out); -+ int buf_len = urb->transfer_buffer_length; -+ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL; -+ struct USB_SB_Desc *sb_desc = NULL; -+ -+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv != NULL); -+ -+ switch(type) { -+ case PIPE_CONTROL: -+ /* Setup stage */ -+ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ set_sb_cmds(sb_desc, CMD_FULL); -+ -+ /* Attach first SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ -+ if (is_out) { /* Out Control URB */ -+ /* If this Control OUT transfer has an optional data stage we add -+ an OUT token before the mandatory IN (status) token */ -+ if ((buf_len > 0) && buf) { -+ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ -+ /* Status stage */ -+ /* The data length has to be exactly 1. This is due to a requirement -+ of the USB specification that a host must be prepared to receive -+ data in the status phase */ -+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ } else { /* In control URB */ -+ /* Data stage */ -+ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ -+ /* Status stage */ -+ /* Read comment at zout_buffer declaration for an explanation to this. */ -+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ /* Set descriptor interrupt flag for in URBs so we can finish URB after -+ zout-packet has been sent */ -+ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL); -+ } -+ /* Set end-of-list flag in last SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ /* Attach last SB to URB */ -+ urb_priv->last_sb = sb_desc; -+ break; -+ -+ case PIPE_BULK: -+ if (is_out) { /* Out Bulk URB */ -+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ /* The full field is set to yes, even if we don't actually check that -+ this is a full-length transfer (i.e., that transfer_buffer_length % -+ maxlen = 0). -+ Setting full prevents the USB controller from sending an empty packet -+ in that case. However, if URB_ZERO_PACKET was set we want that. */ -+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ } else { /* In Bulk URB */ -+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ } -+ /* Set end-of-list flag for last SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ -+ /* Attach SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ urb_priv->last_sb = sb_desc; -+ break; -+ -+ case PIPE_INTERRUPT: -+ if(is_out) { /* Out Intr URB */ -+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ -+ /* The full field is set to yes, even if we don't actually check that -+ this is a full-length transfer (i.e., that transfer_buffer_length % -+ maxlen = 0). -+ Setting full prevents the USB controller from sending an empty packet -+ in that case. However, if URB_ZERO_PACKET was set we want that. */ -+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ /* Only generate TX interrupt if it's a Out URB*/ -+ set_sb_cmds(sb_desc, CMD_INTR); -+ -+ } else { /* In Intr URB */ -+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ } -+ /* Set end-of-list flag for last SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ -+ /* Attach SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ urb_priv->last_sb = sb_desc; -+ -+ break; -+ case PIPE_ISOCHRONOUS: -+ if(is_out) { /* Out Isoc URB */ -+ int i; -+ if(urb->number_of_packets == 0) { -+ tc_err("Can't create SBs for Isoc URB with zero packets\n"); -+ return -EPIPE; -+ } -+ /* Create one SB descriptor for each packet and link them together. */ -+ for(i = 0; i < urb->number_of_packets; i++) { -+ if (urb->iso_frame_desc[i].length > 0) { -+ -+ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer + -+ urb->iso_frame_desc[i].offset, -+ urb->iso_frame_desc[i].length, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ -+ /* Check if it's a full length packet */ -+ if (urb->iso_frame_desc[i].length == -+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ -+ } else { /* zero length packet */ -+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ /* Attach first SB descriptor to URB */ -+ if (i == 0) { -+ urb_priv->first_sb = sb_desc; -+ } -+ } -+ /* Set interrupt and end-of-list flags in last SB */ -+ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL); -+ /* Attach last SB descriptor to URB */ -+ urb_priv->last_sb = sb_desc; -+ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n", -+ urb->number_of_packets, (unsigned int)urb); -+ } else { /* In Isoc URB */ -+ /* Actual number of packets is not relevant for periodic in traffic as -+ long as it is more than zero. Set to 1 always. */ -+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ /* Set end-of-list flags for SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ -+ /* Attach SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ urb_priv->last_sb = sb_desc; -+ } -+ break; -+ default: -+ tc_err("Unknown pipe-type\n"); -+ return -EPIPE; -+ break; -+ } -+ return 0; -+} -+ -+int init_intr_urb(struct urb *urb, int mem_flags) { -+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ struct USB_EP_Desc* ep_desc; -+ int interval; -+ int i; -+ int ep_count; -+ -+ ASSERT(urb_priv != NULL); -+ ASSERT(usb_pipeint(urb->pipe)); -+ /* We can't support interval longer than amount of eof descriptors in -+ TxIntrEPList */ -+ if(urb->interval > MAX_INTR_INTERVAL) { -+ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval, -+ MAX_INTR_INTERVAL); -+ return -EINVAL; -+ } -+ -+ /* We assume that the SB descriptors already have been setup */ -+ ASSERT(urb_priv->first_sb != NULL); -+ -+ /* Round of the interval to 2^n, it is obvious that this code favours -+ smaller numbers, but that is actually a good thing */ -+ /* FIXME: The "rounding error" for larger intervals will be quite -+ large. For in traffic this shouldn't be a problem since it will only -+ mean that we "poll" more often. */ -+ interval = urb->interval; -+ for (i = 0; interval; i++) { -+ interval = interval >> 1; -+ } -+ urb_priv->interval = 1 << (i - 1); -+ -+ /* We can only have max interval for Out Interrupt due to that we can only -+ handle one linked in EP for a certain epid in the Intr descr array at the -+ time. The USB Controller in the Etrax 100LX continues to process Intr EPs -+ so we have no way of knowing which one that caused the actual transfer if -+ we have several linked in. */ -+ if(usb_pipeout(urb->pipe)) { -+ urb_priv->interval = MAX_INTR_INTERVAL; -+ } -+ -+ /* Calculate amount of EPs needed */ -+ ep_count = MAX_INTR_INTERVAL / urb_priv->interval; -+ -+ for(i = 0; i < ep_count; i++) { -+ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags); -+ if(ep_desc == NULL) { -+ /* Free any descriptors that we may have allocated before failure */ -+ while(i > 0) { -+ i--; -+ kfree(urb_priv->intr_ep_pool[i]); -+ } -+ return -ENOMEM; -+ } -+ urb_priv->intr_ep_pool[i] = ep_desc; -+ } -+ urb_priv->intr_ep_pool_length = ep_count; -+ return 0; -+} -+ -+/* DMA RX/TX functions */ -+/* ----------------------- */ -+ -+static void tc_dma_init_rx_list(void) { -+ int i; -+ -+ /* Setup descriptor list except last one */ -+ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { -+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; -+ RxDescList[i].command = 0; -+ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); -+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); -+ RxDescList[i].hw_len = 0; -+ RxDescList[i].status = 0; -+ -+ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as -+ USB_IN_Desc for the relevant fields.) */ -+ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); -+ -+ } -+ /* Special handling of last descriptor */ -+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; -+ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); -+ RxDescList[i].next = virt_to_phys(&RxDescList[0]); -+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); -+ RxDescList[i].hw_len = 0; -+ RxDescList[i].status = 0; -+ -+ /* Setup list pointers that show progress in list */ -+ myNextRxDesc = &RxDescList[0]; -+ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; -+ -+ flush_etrax_cache(); -+ /* Point DMA to first descriptor in list and start it */ -+ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); -+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); -+} -+ -+ -+static void tc_dma_init_tx_bulk_list(void) { -+ int i; -+ volatile struct USB_EP_Desc *epDescr; -+ -+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -+ epDescr = &(TxBulkEPList[i]); -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]); -+ -+ /* Initiate two EPs, disabled and with the eol flag set. No need for any -+ preserved epid. */ -+ -+ /* The first one has the intr flag set so we get an interrupt when the DMA -+ channel is about to become disabled. */ -+ CHECK_ALIGN(&TxBulkDummyEPList[i][0]); -+ TxBulkDummyEPList[i][0].hw_len = 0; -+ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | -+ IO_STATE(USB_EP_command, eol, yes) | -+ IO_STATE(USB_EP_command, intr, yes)); -+ TxBulkDummyEPList[i][0].sub = 0; -+ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); -+ -+ /* The second one. */ -+ CHECK_ALIGN(&TxBulkDummyEPList[i][1]); -+ TxBulkDummyEPList[i][1].hw_len = 0; -+ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | -+ IO_STATE(USB_EP_command, eol, yes)); -+ TxBulkDummyEPList[i][1].sub = 0; -+ /* The last dummy's next pointer is the same as the current EP's next pointer. */ -+ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); -+ } -+ -+ /* Special handling of last descr in list, make list circular */ -+ epDescr = &TxBulkEPList[i]; -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | -+ IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxBulkEPList[0]); -+ -+ /* Init DMA sub-channel pointers to last item in each list */ -+ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); -+ /* No point in starting the bulk channel yet. -+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ -+} -+ -+static void tc_dma_init_tx_ctrl_list(void) { -+ int i; -+ volatile struct USB_EP_Desc *epDescr; -+ -+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -+ epDescr = &(TxCtrlEPList[i]); -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]); -+ } -+ /* Special handling of last descr in list, make list circular */ -+ epDescr = &TxCtrlEPList[i]; -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | -+ IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxCtrlEPList[0]); -+ -+ /* Init DMA sub-channel pointers to last item in each list */ -+ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]); -+ /* No point in starting the ctrl channel yet. -+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ -+} -+ -+ -+static void tc_dma_init_tx_intr_list(void) { -+ int i; -+ -+ TxIntrSB_zout.sw_len = 1; -+ TxIntrSB_zout.next = 0; -+ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); -+ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | -+ IO_STATE(USB_SB_command, tt, zout) | -+ IO_STATE(USB_SB_command, full, yes) | -+ IO_STATE(USB_SB_command, eot, yes) | -+ IO_STATE(USB_SB_command, eol, yes)); -+ -+ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { -+ CHECK_ALIGN(&TxIntrEPList[i]); -+ TxIntrEPList[i].hw_len = 0; -+ TxIntrEPList[i].command = -+ (IO_STATE(USB_EP_command, eof, yes) | -+ IO_STATE(USB_EP_command, enable, yes) | -+ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); -+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); -+ } -+ -+ /* Special handling of last descr in list, make list circular */ -+ CHECK_ALIGN(&TxIntrEPList[i]); -+ TxIntrEPList[i].hw_len = 0; -+ TxIntrEPList[i].command = -+ (IO_STATE(USB_EP_command, eof, yes) | -+ IO_STATE(USB_EP_command, eol, yes) | -+ IO_STATE(USB_EP_command, enable, yes) | -+ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); -+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); -+ -+ intr_dbg("Initiated Intr EP descriptor list\n"); -+ -+ -+ /* Connect DMA 8 sub-channel 2 to first in list */ -+ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); -+} -+ -+static void tc_dma_init_tx_isoc_list(void) { -+ int i; -+ -+ DBFENTER; -+ -+ /* Read comment at zout_buffer declaration for an explanation to this. */ -+ TxIsocSB_zout.sw_len = 1; -+ TxIsocSB_zout.next = 0; -+ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); -+ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | -+ IO_STATE(USB_SB_command, tt, zout) | -+ IO_STATE(USB_SB_command, full, yes) | -+ IO_STATE(USB_SB_command, eot, yes) | -+ IO_STATE(USB_SB_command, eol, yes)); -+ -+ /* The last isochronous EP descriptor is a dummy. */ -+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -+ CHECK_ALIGN(&TxIsocEPList[i]); -+ TxIsocEPList[i].hw_len = 0; -+ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); -+ TxIsocEPList[i].sub = 0; -+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); -+ } -+ -+ CHECK_ALIGN(&TxIsocEPList[i]); -+ TxIsocEPList[i].hw_len = 0; -+ -+ /* Must enable the last EP descr to get eof interrupt. */ -+ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | -+ IO_STATE(USB_EP_command, eof, yes) | -+ IO_STATE(USB_EP_command, eol, yes) | -+ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -+ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); -+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); -+ -+ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); -+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); -+} -+ -+static int tc_dma_init(struct usb_hcd *hcd) { -+ tc_dma_init_rx_list(); -+ tc_dma_init_tx_bulk_list(); -+ tc_dma_init_tx_ctrl_list(); -+ tc_dma_init_tx_intr_list(); -+ tc_dma_init_tx_isoc_list(); -+ -+ if (cris_request_dma(USB_TX_DMA_NBR, -+ "ETRAX 100LX built-in USB (Tx)", -+ DMA_VERBOSE_ON_ERROR, -+ dma_usb)) { -+ err("Could not allocate DMA ch 8 for USB"); -+ return -EBUSY; -+ } -+ -+ if (cris_request_dma(USB_RX_DMA_NBR, -+ "ETRAX 100LX built-in USB (Rx)", -+ DMA_VERBOSE_ON_ERROR, -+ dma_usb)) { -+ err("Could not allocate DMA ch 9 for USB"); -+ return -EBUSY; -+ } -+ -+ *R_IRQ_MASK2_SET = -+ /* Note that these interrupts are not used. */ -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | -+ /* Sub channel 1 (ctrl) descr. interrupts are used. */ -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | -+ /* Sub channel 3 (isoc) descr. interrupts are used. */ -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); -+ -+ /* Note that the dma9_descr interrupt is not used. */ -+ *R_IRQ_MASK2_SET = -+ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | -+ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); -+ -+ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0, -+ "ETRAX 100LX built-in USB (Rx)", hcd)) { -+ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); -+ return -EBUSY; -+ } -+ -+ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0, -+ "ETRAX 100LX built-in USB (Tx)", hcd)) { -+ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); -+ return -EBUSY; -+ } -+ -+ return 0; -+} -+ -+static void tc_dma_destroy(void) { -+ free_irq(ETRAX_USB_RX_IRQ, NULL); -+ free_irq(ETRAX_USB_TX_IRQ, NULL); -+ -+ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)"); -+ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)"); -+ -+} -+ -+static void tc_dma_link_intr_urb(struct urb *urb); -+ -+/* Handle processing of Bulk, Ctrl and Intr queues */ -+static void tc_dma_process_queue(int epid) { -+ struct urb *urb; -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ unsigned long flags; -+ char toggle; -+ -+ if(epid_state[epid].disabled) { -+ /* Don't process any URBs on a disabled endpoint */ -+ return; -+ } -+ -+ /* Do not disturb us while fiddling with EPs and epids */ -+ local_irq_save(flags); -+ -+ /* For bulk, Ctrl and Intr can we only have one URB active at a time for -+ a specific EP. */ -+ if(activeUrbList[epid] != NULL) { -+ /* An URB is already active on EP, skip checking queue */ -+ local_irq_restore(flags); -+ return; -+ } -+ -+ urb = urb_list_first(epid); -+ if(urb == NULL) { -+ /* No URB waiting in EP queue. Nothing do to */ -+ local_irq_restore(flags); -+ return; -+ } -+ -+ urb_priv = urb->hcpriv; -+ ASSERT(urb_priv != NULL); -+ ASSERT(urb_priv->urb_state == NOT_STARTED); -+ ASSERT(!usb_pipeisoc(urb->pipe)); -+ -+ /* Remove this URB from the queue and move it to active */ -+ activeUrbList[epid] = urb; -+ urb_list_del(urb, epid); -+ -+ urb_priv->urb_state = STARTED; -+ -+ /* Reset error counters (regardless of which direction this traffic is). */ -+ etrax_epid_clear_error(epid); -+ -+ /* Special handling of Intr EP lists */ -+ if(usb_pipeint(urb->pipe)) { -+ tc_dma_link_intr_urb(urb); -+ local_irq_restore(flags); -+ return; -+ } -+ -+ /* Software must preset the toggle bits for Bulk and Ctrl */ -+ if(usb_pipecontrol(urb->pipe)) { -+ /* Toggle bits are initialized only during setup transaction in a -+ CTRL transfer */ -+ etrax_epid_set_toggle(epid, 0, 0); -+ etrax_epid_set_toggle(epid, 1, 0); -+ } else { -+ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), -+ usb_pipeout(urb->pipe)); -+ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle); -+ } -+ -+ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n", -+ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid, -+ sblist_to_str(urb_priv->first_sb)); -+ -+ /* We start the DMA sub channel without checking if it's running or not, -+ because: -+ 1) If it's already running, issuing the start command is a nop. -+ 2) We avoid a test-and-set race condition. */ -+ switch(usb_pipetype(urb->pipe)) { -+ case PIPE_BULK: -+ /* Assert that the EP descriptor is disabled. */ -+ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); -+ -+ /* Set up and enable the EP descriptor. */ -+ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ TxBulkEPList[epid].hw_len = 0; -+ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ -+ /* Check if the dummy list is already with us (if several urbs were queued). */ -+ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) { -+ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d", -+ (unsigned long)urb, epid); -+ -+ /* We don't need to check if the DMA is at this EP or not before changing the -+ next pointer, since we will do it in one 32-bit write (EP descriptors are -+ 32-bit aligned). */ -+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); -+ } -+ -+ restart_dma8_sub0(); -+ -+ /* Update/restart the bulk start timer since we just started the channel.*/ -+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); -+ /* Update/restart the bulk eot timer since we just inserted traffic. */ -+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -+ break; -+ case PIPE_CONTROL: -+ /* Assert that the EP descriptor is disabled. */ -+ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); -+ -+ /* Set up and enable the EP descriptor. */ -+ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ TxCtrlEPList[epid].hw_len = 0; -+ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ -+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); -+ break; -+ } -+ local_irq_restore(flags); -+} -+ -+static void tc_dma_link_intr_urb(struct urb *urb) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ volatile struct USB_EP_Desc *tmp_ep; -+ struct USB_EP_Desc *ep_desc; -+ int i = 0, epid; -+ int pool_idx = 0; -+ -+ ASSERT(urb_priv != NULL); -+ epid = urb_priv->epid; -+ ASSERT(urb_priv->interval > 0); -+ ASSERT(urb_priv->intr_ep_pool_length > 0); -+ -+ tmp_ep = &TxIntrEPList[0]; -+ -+ /* Only insert one EP descriptor in list for Out Intr URBs. -+ We can only handle Out Intr with interval of 128ms because -+ it's not possible to insert several Out Intr EPs because they -+ are not consumed by the DMA. */ -+ if(usb_pipeout(urb->pipe)) { -+ ep_desc = urb_priv->intr_ep_pool[0]; -+ ASSERT(ep_desc); -+ ep_desc->next = tmp_ep->next; -+ tmp_ep->next = virt_to_phys(ep_desc); -+ i++; -+ } else { -+ /* Loop through Intr EP descriptor list and insert EP for URB at -+ specified interval */ -+ do { -+ /* Each EP descriptor with eof flag sat signals a new frame */ -+ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { -+ /* Insert a EP from URBs EP pool at correct interval */ -+ if ((i % urb_priv->interval) == 0) { -+ ep_desc = urb_priv->intr_ep_pool[pool_idx]; -+ ASSERT(ep_desc); -+ ep_desc->next = tmp_ep->next; -+ tmp_ep->next = virt_to_phys(ep_desc); -+ pool_idx++; -+ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length); - } -+ i++; -+ } -+ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next); -+ } while(tmp_ep != &TxIntrEPList[0]); -+ } -+ -+ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid, -+ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx); -+ -+ /* We start the DMA sub channel without checking if it's running or not, -+ because: -+ 1) If it's already running, issuing the start command is a nop. -+ 2) We avoid a test-and-set race condition. */ -+ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); -+} -+ -+static void tc_dma_process_isoc_urb(struct urb *urb) { -+ unsigned long flags; -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ int epid; -+ -+ /* Do not disturb us while fiddling with EPs and epids */ -+ local_irq_save(flags); -+ -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->first_sb); -+ epid = urb_priv->epid; -+ -+ if(activeUrbList[epid] == NULL) { -+ /* EP is idle, so make this URB active */ -+ activeUrbList[epid] = urb; -+ urb_list_del(urb, epid); -+ ASSERT(TxIsocEPList[epid].sub == 0); -+ ASSERT(!(TxIsocEPList[epid].command & -+ IO_STATE(USB_EP_command, enable, yes))); -+ -+ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/ -+ if(usb_pipein(urb->pipe)) { -+ /* Each EP for In Isoc will have only one SB descriptor, setup when -+ submitting the first active urb. We do it here by copying from URBs -+ pre-allocated SB. */ -+ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb, -+ sizeof(TxIsocSBList[epid])); -+ TxIsocEPList[epid].hw_len = 0; -+ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid])); -+ } else { -+ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */ -+ TxIsocEPList[epid].hw_len = 0; -+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ -+ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x" -+ " last_sb::0x%x\n", -+ (unsigned int)urb, urb_priv->urb_num, epid, -+ (unsigned int)(urb_priv->first_sb), -+ (unsigned int)(urb_priv->last_sb)); -+ } -+ -+ if (urb->transfer_flags & URB_ISO_ASAP) { -+ /* The isoc transfer should be started as soon as possible. The -+ start_frame field is a return value if URB_ISO_ASAP was set. Comparing -+ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN -+ token is sent 2 frames later. I'm not sure how this affects usage of -+ the start_frame field by the device driver, or how it affects things -+ when USB_ISO_ASAP is not set, so therefore there's no compensation for -+ the 2 frame "lag" here. */ -+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); -+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ urb_priv->urb_state = STARTED; -+ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n", -+ urb->start_frame); -+ } else { -+ /* Not started yet. */ -+ urb_priv->urb_state = NOT_STARTED; -+ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n", -+ (unsigned int)urb); -+ } -+ -+ } else { -+ /* An URB is already active on the EP. Leave URB in queue and let -+ finish_isoc_urb process it after current active URB */ -+ ASSERT(TxIsocEPList[epid].sub != 0); -+ -+ if(usb_pipein(urb->pipe)) { -+ /* Because there already is a active In URB on this epid we do nothing -+ and the finish_isoc_urb() function will handle switching to next URB*/ -+ -+ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */ -+ struct USB_SB_Desc *temp_sb_desc; -+ -+ /* Set state STARTED to all Out Isoc URBs added to SB list because we -+ don't know how many of them that are finished before descr interrupt*/ -+ urb_priv->urb_state = STARTED; -+ -+ /* Find end of current SB list by looking for SB with eol flag sat */ -+ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); -+ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != -+ IO_STATE(USB_SB_command, eol, yes)) { -+ ASSERT(temp_sb_desc->next); -+ temp_sb_desc = phys_to_virt(temp_sb_desc->next); -+ } -+ -+ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d" -+ " sub:0x%x eol:0x%x\n", -+ (unsigned int)urb, urb_priv->urb_num, -+ (unsigned int)(urb_priv->first_sb), -+ (unsigned int)(urb_priv->last_sb), epid, -+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), -+ (unsigned int)temp_sb_desc); -+ -+ /* Next pointer must be set before eol is removed. */ -+ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); -+ /* Clear the previous end of list flag since there is a new in the -+ added SB descriptor list. */ -+ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); -+ -+ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { -+ __u32 epid_data; -+ /* 8.8.5 in Designer's Reference says we should check for and correct -+ any errors in the EP here. That should not be necessary if -+ epid_attn is handled correctly, so we assume all is ok. */ -+ epid_data = etrax_epid_iso_get(epid); -+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) != -+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending" -+ " URB:0x%x[%d]\n", -+ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid, -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ -+ /* The SB list was exhausted. */ -+ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { -+ /* The new sublist did not get processed before the EP was -+ disabled. Setup the EP again. */ -+ -+ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) { -+ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted" -+ ", restarting from this URBs SB:0x%x\n", -+ epid, (unsigned int)temp_sb_desc, -+ (unsigned int)(urb_priv->first_sb)); -+ TxIsocEPList[epid].hw_len = 0; -+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); -+ /* Enable the EP again so data gets processed this time */ -+ TxIsocEPList[epid].command |= -+ IO_STATE(USB_EP_command, enable, yes); -+ -+ } else { -+ /* The EP has been disabled but not at end this URB (god knows -+ where). This should generate an epid_attn so we should not be -+ here */ -+ isoc_warn("EP was disabled on sb:0x%x before SB list for" -+ " URB:0x%x[%d] got processed\n", -+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ } else { -+ /* This might happend if we are slow on this function and isn't -+ an error. */ -+ isoc_dbg("EP was disabled and finished with SBs from appended" -+ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num); -+ } -+ } -+ } -+ } -+ -+ /* Start the DMA sub channel */ -+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); -+ -+ local_irq_restore(flags); -+} -+ -+static void tc_dma_unlink_intr_urb(struct urb *urb) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ -+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ -+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ -+ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from -+ the list. */ -+ int count = 0; -+ volatile int timeout = 10000; -+ int epid; -+ -+ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the -+ List". */ -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->intr_ep_pool_length > 0); -+ epid = urb_priv->epid; -+ -+ /* First disable all Intr EPs belonging to epid for this URB */ -+ first_ep = &TxIntrEPList[0]; -+ curr_ep = first_ep; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -+ /* Disable EP */ -+ next_ep->command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != first_ep); -+ -+ -+ /* Now unlink all EPs belonging to this epid from Descr list */ -+ first_ep = &TxIntrEPList[0]; -+ curr_ep = first_ep; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -+ /* This is the one we should unlink. */ -+ unlink_ep = next_ep; -+ -+ /* Actually unlink the EP from the DMA list. */ -+ curr_ep->next = unlink_ep->next; -+ -+ /* Wait until the DMA is no longer at this descriptor. */ -+ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n"); -+ } -+ -+ count++; -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != first_ep); -+ -+ if(count != urb_priv->intr_ep_pool_length) { -+ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count, -+ urb_priv->intr_ep_pool_length, (unsigned int)urb, -+ urb_priv->urb_num); -+ } else { -+ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count, -+ urb_priv->intr_ep_pool_length, (unsigned int)urb); -+ } -+} -+ -+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, -+ int timer) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ __u32 epid_data; -+ -+ /* Protect TxEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ /* A finished EP descriptor is disabled and has a valid sub pointer */ -+ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && -+ (TxBulkEPList[epid].sub != 0)) { -+ -+ /* Get the active URB for this epid */ -+ urb = activeUrbList[epid]; -+ /* Sanity checks */ -+ ASSERT(urb); -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ /* Only handle finished out Bulk EPs here, -+ and let RX interrupt take care of the rest */ -+ if(!epid_out_traffic(epid)) { -+ continue; -+ } -+ -+ if(timer) { -+ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n", -+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, -+ urb_priv->urb_num); -+ } else { -+ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n", -+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, -+ urb_priv->urb_num); -+ } -+ -+ if(urb_priv->urb_state == UNLINK) { -+ /* This Bulk URB is requested to be unlinked, that means that the EP -+ has been disabled and we might not have sent all data */ -+ tc_finish_urb(hcd, urb, urb->status); -+ continue; -+ } -+ -+ ASSERT(urb_priv->urb_state == STARTED); -+ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { -+ tc_err("Endpoint got disabled before reaching last sb\n"); -+ } -+ -+ epid_data = etrax_epid_get(epid); -+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == -+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ /* This means that the endpoint has no error, is disabled -+ and had inserted traffic, i.e. transfer successfully completed. */ -+ tc_finish_urb(hcd, urb, 0); -+ } else { -+ /* Shouldn't happen. We expect errors to be caught by epid -+ attention. */ -+ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n", -+ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); -+ } -+ } else { -+ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid); -+ } -+ } -+ -+ local_irq_restore(flags); -+} -+ -+static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ __u32 epid_data; -+ -+ /* Protect TxEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if(epid == DUMMY_EPID) -+ continue; -+ -+ /* A finished EP descriptor is disabled and has a valid sub pointer */ -+ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) && -+ (TxCtrlEPList[epid].sub != 0)) { -+ -+ /* Get the active URB for this epid */ -+ urb = activeUrbList[epid]; -+ -+ if(urb == NULL) { -+ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid); -+ continue; -+ } -+ -+ /* Sanity checks */ -+ ASSERT(usb_pipein(urb->pipe)); -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) { -+ tc_err("Endpoint got disabled before reaching last sb\n"); -+ } -+ -+ epid_data = etrax_epid_get(epid); -+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == -+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ /* This means that the endpoint has no error, is disabled -+ and had inserted traffic, i.e. transfer successfully completed. */ -+ -+ /* Check if RX-interrupt for In Ctrl has been processed before -+ finishing the URB */ -+ if(urb_priv->ctrl_rx_done) { -+ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n", -+ (unsigned int)urb, urb_priv->urb_num); -+ tc_finish_urb(hcd, urb, 0); -+ } else { -+ /* If we get zout descriptor interrupt before RX was done for a -+ In Ctrl transfer, then we flag that and it will be finished -+ in the RX-Interrupt */ -+ urb_priv->ctrl_zout_done = 1; -+ tc_dbg("Got zout descr interrupt before RX interrupt\n"); -+ } -+ } else { -+ /* Shouldn't happen. We expect errors to be caught by epid -+ attention. */ -+ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); -+ __dump_ep_desc(&(TxCtrlEPList[epid])); -+ __dump_ept_data(epid); -+ } -+ } -+ } -+ local_irq_restore(flags); -+} -+ -+/* This function goes through all epids that are setup for Out Isoc transfers -+ and marks (isoc_out_done) all queued URBs that the DMA has finished -+ transfer for. -+ No URB completetion is done here to make interrupt routine return quickly. -+ URBs are completed later with help of complete_isoc_bottom_half() that -+ becomes schedules when this functions is finished. */ -+static void check_finished_isoc_tx_epids(void) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ struct USB_SB_Desc* sb_desc; -+ int epid_done; -+ -+ /* Protect TxIsocEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID || -+ !epid_out_traffic(epid)) { -+ /* Nothing here to see. */ -+ continue; -+ } -+ ASSERT(epid_inuse(epid)); -+ ASSERT(epid_isoc(epid)); -+ -+ sb_desc = phys_to_virt(TxIsocEPList[epid].sub); -+ /* Find the last descriptor of the currently active URB for this ep. -+ This is the first descriptor in the sub list marked for a descriptor -+ interrupt. */ -+ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { -+ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; -+ } -+ ASSERT(sb_desc); -+ -+ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n", -+ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), -+ (unsigned int)sb_desc); -+ -+ urb = activeUrbList[epid]; -+ if(urb == NULL) { -+ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid); -+ continue; -+ } -+ -+ epid_done = 0; -+ while(urb && !epid_done) { -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -+ ASSERT(usb_pipeout(urb->pipe)); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->urb_state == STARTED || -+ urb_priv->urb_state == UNLINK); -+ -+ if (sb_desc != urb_priv->last_sb) { -+ /* This urb has been sent. */ -+ urb_priv->isoc_out_done = 1; -+ -+ } else { /* Found URB that has last_sb as the interrupt reason */ -+ -+ /* Check if EP has been disabled, meaning that all transfers are done*/ -+ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { -+ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) == -+ IO_STATE(USB_SB_command, eol, yes)); -+ ASSERT(sb_desc->next == 0); -+ urb_priv->isoc_out_done = 1; -+ } else { -+ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n", -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ /* Stop looking any further in queue */ -+ epid_done = 1; -+ } -+ -+ if (!epid_done) { -+ if(urb == activeUrbList[epid]) { -+ urb = urb_list_first(epid); -+ } else { -+ urb = urb_list_next(urb, epid); -+ } -+ } -+ } /* END: while(urb && !epid_done) */ -+ } -+ -+ local_irq_restore(flags); -+} -+ -+ -+/* This is where the Out Isoc URBs are realy completed. This function is -+ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers -+ are done. This functions completes all URBs earlier marked with -+ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */ -+ -+static void complete_isoc_bottom_half(void *data) { -+ struct crisv10_isoc_complete_data *comp_data; -+ struct usb_iso_packet_descriptor *packet; -+ struct crisv10_urb_priv * urb_priv; -+ unsigned long flags; -+ struct urb* urb; -+ int epid_done; -+ int epid; -+ int i; -+ -+ comp_data = (struct crisv10_isoc_complete_data*)data; -+ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -+ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) { -+ /* Only check valid Out Isoc epids */ -+ continue; -+ } -+ -+ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid, -+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub)); -+ -+ /* The descriptor interrupt handler has marked all transmitted Out Isoc -+ URBs with isoc_out_done. Now we traverse all epids and for all that -+ have out Isoc traffic we traverse its URB list and complete the -+ transmitted URBs. */ -+ epid_done = 0; -+ while (!epid_done) { -+ -+ /* Get the active urb (if any) */ -+ urb = activeUrbList[epid]; -+ if (urb == 0) { -+ isoc_dbg("No active URB on epid:%d anymore\n", epid); -+ epid_done = 1; -+ continue; -+ } -+ -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -+ ASSERT(usb_pipeout(urb->pipe)); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ if (!(urb_priv->isoc_out_done)) { -+ /* We have reached URB that isn't flaged done yet, stop traversing. */ -+ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d" -+ " before not yet flaged URB:0x%x[%d]\n", -+ epid, (unsigned int)urb, urb_priv->urb_num); -+ epid_done = 1; -+ continue; -+ } -+ -+ /* This urb has been sent. */ -+ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n", -+ (unsigned int)urb, urb_priv->urb_num); -+ -+ /* Set ok on transfered packets for this URB and finish it */ -+ for (i = 0; i < urb->number_of_packets; i++) { -+ packet = &urb->iso_frame_desc[i]; -+ packet->status = 0; -+ packet->actual_length = packet->length; -+ } -+ urb_priv->isoc_packet_counter = urb->number_of_packets; -+ tc_finish_urb(comp_data->hcd, urb, 0); -+ -+ } /* END: while(!epid_done) */ -+ } /* END: for(epid...) */ -+ -+ local_irq_restore(flags); -+ kmem_cache_free(isoc_compl_cache, comp_data); -+} -+ -+ -+static void check_finished_intr_tx_epids(struct usb_hcd *hcd) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ -+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ -+ -+ /* Protect TxintrEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) { -+ /* Nothing to see on this epid. Only check valid Out Intr epids */ -+ continue; -+ } -+ -+ urb = activeUrbList[epid]; -+ if(urb == 0) { -+ intr_warn("Found Out Intr epid:%d with no active URB\n", epid); -+ continue; -+ } -+ -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT); -+ ASSERT(usb_pipeout(urb->pipe)); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs -+ are inserted.*/ -+ curr_ep = &TxIntrEPList[0]; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if(next_ep == urb_priv->intr_ep_pool[0]) { -+ /* We found the Out Intr EP for this epid */ -+ -+ /* Disable it so it doesn't get processed again */ -+ next_ep->command &= ~IO_MASK(USB_EP_command, enable); -+ -+ /* Finish the active Out Intr URB with status OK */ -+ tc_finish_urb(hcd, urb, 0); -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != &TxIntrEPList[1]); -+ -+ } -+ local_irq_restore(flags); -+} -+ -+/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */ -+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) { -+ struct usb_hcd *hcd = (struct usb_hcd*)vhc; -+ ASSERT(hcd); -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); -+ restart_dma8_sub0(); -+ } -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); -+ check_finished_ctrl_tx_epids(hcd); -+ } -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); -+ check_finished_intr_tx_epids(hcd); -+ } -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { -+ struct crisv10_isoc_complete_data* comp_data; -+ -+ /* Flag done Out Isoc for later completion */ -+ check_finished_isoc_tx_epids(); -+ -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); -+ /* Schedule bottom half of Out Isoc completion function. This function -+ finishes the URBs marked with isoc_out_done */ -+ comp_data = (struct crisv10_isoc_complete_data*) -+ kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC); -+ ASSERT(comp_data != NULL); -+ comp_data ->hcd = hcd; -+ -+ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data); -+ schedule_work(&comp_data->usb_bh); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */ -+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) { -+ unsigned long flags; -+ struct urb *urb; -+ struct usb_hcd *hcd = (struct usb_hcd*)vhc; -+ struct crisv10_urb_priv *urb_priv; -+ int epid = 0; -+ int real_error; -+ -+ ASSERT(hcd); -+ -+ /* Clear this interrupt. */ -+ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); -+ -+ /* Custom clear interrupt for this interrupt */ -+ /* The reason we cli here is that we call the driver's callback functions. */ -+ local_irq_save(flags); -+ -+ /* Note that this while loop assumes that all packets span only -+ one rx descriptor. */ -+ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { -+ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); -+ /* Get the active URB for this epid */ -+ urb = activeUrbList[epid]; -+ -+ ASSERT(epid_inuse(epid)); -+ if (!urb) { -+ dma_err("No urb for epid %d in rx interrupt\n", epid); -+ goto skip_out; -+ } -+ -+ /* Check if any errors on epid */ -+ real_error = 0; -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { -+ __u32 r_usb_ept_data; -+ -+ if (usb_pipeisoc(urb->pipe)) { -+ r_usb_ept_data = etrax_epid_iso_get(epid); -+ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && -+ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && -+ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { -+ /* Not an error, just a failure to receive an expected iso -+ in packet in this frame. This is not documented -+ in the designers reference. Continue processing. -+ */ -+ } else real_error = 1; -+ } else real_error = 1; -+ } -+ -+ if(real_error) { -+ dma_err("Error in RX descr on epid:%d for URB 0x%x", -+ epid, (unsigned int)urb); -+ dump_ept_data(epid); -+ dump_in_desc(myNextRxDesc); -+ goto skip_out; -+ } -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->urb_state == STARTED || -+ urb_priv->urb_state == UNLINK); -+ -+ if ((usb_pipetype(urb->pipe) == PIPE_BULK) || -+ (usb_pipetype(urb->pipe) == PIPE_CONTROL) || -+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { -+ -+ /* We get nodata for empty data transactions, and the rx descriptor's -+ hw_len field is not valid in that case. No data to copy in other -+ words. */ -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { -+ /* No data to copy */ -+ } else { -+ /* -+ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n", -+ (unsigned int)urb, epid, myNextRxDesc->hw_len, -+ urb_priv->rx_offset); -+ */ -+ /* Only copy data if URB isn't flaged to be unlinked*/ -+ if(urb_priv->urb_state != UNLINK) { -+ /* Make sure the data fits in the buffer. */ -+ if(urb_priv->rx_offset + myNextRxDesc->hw_len -+ <= urb->transfer_buffer_length) { -+ -+ /* Copy the data to URBs buffer */ -+ memcpy(urb->transfer_buffer + urb_priv->rx_offset, -+ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); -+ urb_priv->rx_offset += myNextRxDesc->hw_len; -+ } else { -+ /* Signal overflow when returning URB */ -+ urb->status = -EOVERFLOW; -+ tc_finish_urb_later(hcd, urb, urb->status); -+ } -+ } -+ } -+ -+ /* Check if it was the last packet in the transfer */ -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { -+ /* Special handling for In Ctrl URBs. */ -+ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) && -+ !(urb_priv->ctrl_zout_done)) { -+ /* Flag that RX part of Ctrl transfer is done. Because zout descr -+ interrupt hasn't happend yet will the URB be finished in the -+ TX-Interrupt. */ -+ urb_priv->ctrl_rx_done = 1; -+ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting" -+ " for zout\n", (unsigned int)urb); -+ } else { -+ tc_finish_urb(hcd, urb, 0); -+ } -+ } -+ } else { /* ISOC RX */ -+ /* -+ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n", -+ epid, (unsigned int)urb); -+ */ -+ -+ struct usb_iso_packet_descriptor *packet; -+ -+ if (urb_priv->urb_state == UNLINK) { -+ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n"); -+ goto skip_out; -+ } else if (urb_priv->urb_state == NOT_STARTED) { -+ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n"); -+ goto skip_out; -+ } -+ -+ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; -+ ASSERT(packet); -+ packet->status = 0; -+ -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { -+ /* We get nodata for empty data transactions, and the rx descriptor's -+ hw_len field is not valid in that case. We copy 0 bytes however to -+ stay in synch. */ -+ packet->actual_length = 0; -+ } else { -+ packet->actual_length = myNextRxDesc->hw_len; -+ /* Make sure the data fits in the buffer. */ -+ ASSERT(packet->actual_length <= packet->length); -+ memcpy(urb->transfer_buffer + packet->offset, -+ phys_to_virt(myNextRxDesc->buf), packet->actual_length); -+ if(packet->actual_length > 0) -+ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n", -+ packet->actual_length, urb_priv->isoc_packet_counter, -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ -+ /* Increment the packet counter. */ -+ urb_priv->isoc_packet_counter++; -+ -+ /* Note that we don't care about the eot field in the rx descriptor's -+ status. It will always be set for isoc traffic. */ -+ if (urb->number_of_packets == urb_priv->isoc_packet_counter) { -+ /* Complete the urb with status OK. */ -+ tc_finish_urb(hcd, urb, 0); -+ } -+ } -+ -+ skip_out: -+ myNextRxDesc->status = 0; -+ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol); -+ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); -+ myLastRxDesc = myNextRxDesc; -+ myNextRxDesc = phys_to_virt(myNextRxDesc->next); -+ flush_etrax_cache(); -+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart); -+ } -+ -+ local_irq_restore(flags); -+ -+ return IRQ_HANDLED; -+} -+ -+static void tc_bulk_start_timer_func(unsigned long dummy) { -+ /* We might enable an EP descriptor behind the current DMA position when -+ it's about to decide that there are no more bulk traffic and it should -+ stop the bulk channel. -+ Therefore we periodically check if the bulk channel is stopped and there -+ is an enabled bulk EP descriptor, in which case we start the bulk -+ channel. */ -+ -+ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { -+ int epid; -+ -+ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n"); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n", -+ epid); -+ restart_dma8_sub0(); -+ -+ /* Restart the bulk eot timer since we just started the bulk channel.*/ -+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -+ -+ /* No need to search any further. */ -+ break; -+ } -+ } -+ } else { -+ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n"); -+ } -+} -+ -+static void tc_bulk_eot_timer_func(unsigned long dummy) { -+ struct usb_hcd *hcd = (struct usb_hcd*)dummy; -+ ASSERT(hcd); -+ /* Because of a race condition in the top half, we might miss a bulk eot. -+ This timer "simulates" a bulk eot if we don't get one for a while, -+ hopefully correcting the situation. */ -+ timer_dbg("bulk_eot_timer timed out.\n"); -+ check_finished_bulk_tx_epids(hcd, 1); -+} -+ -+ -+/*************************************************************/ -+/*************************************************************/ -+/* Device driver block */ -+/*************************************************************/ -+/*************************************************************/ -+ -+/* Forward declarations for device driver functions */ -+static int devdrv_hcd_probe(struct device *); -+static int devdrv_hcd_remove(struct device *); -+#ifdef CONFIG_PM -+static int devdrv_hcd_suspend(struct device *, u32, u32); -+static int devdrv_hcd_resume(struct device *, u32); -+#endif /* CONFIG_PM */ -+ -+/* the device */ -+static struct platform_device *devdrv_hc_platform_device; -+ -+/* device driver interface */ -+static struct device_driver devdrv_hc_device_driver = { -+ .name = (char *) hc_name, -+ .bus = &platform_bus_type, -+ -+ .probe = devdrv_hcd_probe, -+ .remove = devdrv_hcd_remove, -+ -+#ifdef CONFIG_PM -+ .suspend = devdrv_hcd_suspend, -+ .resume = devdrv_hcd_resume, -+#endif /* CONFIG_PM */ -+}; - -- CHECK_ALIGN(&TxIsocEPList[i]); -- TxIsocEPList[i].hw_len = 0; -- -- /* Must enable the last EP descr to get eof interrupt. */ -- TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | -- IO_STATE(USB_EP_command, eof, yes) | -- IO_STATE(USB_EP_command, eol, yes) | -- IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -- TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); -- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); -- -- *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); -- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); -- -- DBFEXIT; --} -- --static void etrax_usb_unlink_intr_urb(struct urb *urb) -+/* initialize the host controller and driver */ -+static int __init_or_module devdrv_hcd_probe(struct device *dev) - { -- volatile USB_EP_Desc_t *first_ep; /* First EP in the list. */ -- volatile USB_EP_Desc_t *curr_ep; /* Current EP, the iterator. */ -- volatile USB_EP_Desc_t *next_ep; /* The EP after current. */ -- volatile USB_EP_Desc_t *unlink_ep; /* The one we should remove from the list. */ -- -- int epid; -- -- /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the List". */ -- -- DBFENTER; -- -- epid = ((etrax_urb_priv_t *)urb->hcpriv)->epid; -- -- first_ep = &TxIntrEPList[0]; -- curr_ep = first_ep; -- -- -- /* Note that this loop removes all EP descriptors with this epid. This assumes -- that all EP descriptors belong to the one and only urb for this epid. */ -- -- do { -- next_ep = (USB_EP_Desc_t *)phys_to_virt(curr_ep->next); -- -- if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -- -- dbg_intr("Found EP to unlink for epid %d", epid); -- -- /* This is the one we should unlink. */ -- unlink_ep = next_ep; -- -- /* Actually unlink the EP from the DMA list. */ -- curr_ep->next = unlink_ep->next; -- -- /* Wait until the DMA is no longer at this descriptor. */ -- while (*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)); -+ struct usb_hcd *hcd; -+ struct crisv10_hcd *crisv10_hcd; -+ int retval; -+ -+ /* Check DMA burst length */ -+ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) != -+ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) { -+ devdrv_err("Invalid DMA burst length in Etrax 100LX," -+ " needs to be 32\n"); -+ return -EPERM; -+ } -+ -+ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id); -+ if (!hcd) -+ return -ENOMEM; -+ -+ crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ spin_lock_init(&crisv10_hcd->lock); -+ crisv10_hcd->num_ports = num_ports(); -+ crisv10_hcd->running = 0; -+ -+ dev_set_drvdata(dev, crisv10_hcd); -+ -+ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ, -+ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ); -+ -+ /* Print out chip version read from registers */ -+ int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major); -+ int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor); -+ if(rev_min == 0) { -+ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj); -+ } else { -+ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min); -+ } -+ -+ devdrv_info("Bulk timer interval, start:%d eot:%d\n", -+ BULK_START_TIMER_INTERVAL, -+ BULK_EOT_TIMER_INTERVAL); -+ -+ -+ /* Init root hub data structures */ -+ if(rh_init()) { -+ devdrv_err("Failed init data for Root Hub\n"); -+ retval = -ENOMEM; -+ } -+ -+ if(port_in_use(0)) { -+ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) { -+ printk(KERN_CRIT "usb-host: request IO interface usb1 failed"); -+ retval = -EBUSY; -+ goto out; -+ } -+ devdrv_info("Claimed interface for USB physical port 1\n"); -+ } -+ if(port_in_use(1)) { -+ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) { -+ /* Free first interface if second failed to be claimed */ -+ if(port_in_use(0)) { -+ cris_free_io_interface(if_usb_1); -+ } -+ printk(KERN_CRIT "usb-host: request IO interface usb2 failed"); -+ retval = -EBUSY; -+ goto out; -+ } -+ devdrv_info("Claimed interface for USB physical port 2\n"); -+ } -+ -+ /* Init transfer controller structs and locks */ -+ if((retval = tc_init(hcd)) != 0) { -+ goto out; -+ } -+ -+ /* Attach interrupt functions for DMA and init DMA controller */ -+ if((retval = tc_dma_init(hcd)) != 0) { -+ goto out; -+ } -+ -+ /* Attach the top IRQ handler for USB controller interrupts */ -+ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0, -+ "ETRAX 100LX built-in USB (HC)", hcd)) { -+ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); -+ retval = -EBUSY; -+ goto out; -+ } -+ -+ /* iso_eof is only enabled when isoc traffic is running. */ -+ *R_USB_IRQ_MASK_SET = -+ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */ -+ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | -+ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | -+ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | -+ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); -+ -+ -+ crisv10_ready_wait(); -+ /* Reset the USB interface. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); -+ -+ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to -+ 0x2A30 (10800), to guarantee that control traffic gets 10% of the -+ bandwidth, and periodic transfer may allocate the rest (90%). -+ This doesn't work though. -+ The value 11960 is chosen to be just after the SOF token, with a couple -+ of bit times extra for possible bit stuffing. */ -+ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); -+ -+ crisv10_ready_wait(); -+ /* Configure the USB interface as a host controller. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); -+ -+ -+ /* Check so controller not busy before enabling ports */ -+ crisv10_ready_wait(); -+ -+ /* Enable selected USB ports */ -+ if(port_in_use(0)) { -+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); -+ } else { -+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); -+ } -+ if(port_in_use(1)) { -+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); -+ } else { -+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); -+ } -+ -+ crisv10_ready_wait(); -+ /* Start processing of USB traffic. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -+ -+ /* Do not continue probing initialization before USB interface is done */ -+ crisv10_ready_wait(); -+ -+ /* Register our Host Controller to USB Core -+ * Finish the remaining parts of generic HCD initialization: allocate the -+ * buffers of consistent memory, register the bus -+ * and call the driver's reset() and start() routines. */ -+ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED); -+ if (retval != 0) { -+ devdrv_err("Failed registering HCD driver\n"); -+ goto out; -+ } -+ -+ return 0; -+ -+ out: -+ devdrv_hcd_remove(dev); -+ return retval; -+} -+ -+ -+/* cleanup after the host controller and driver */ -+static int __init_or_module devdrv_hcd_remove(struct device *dev) -+{ -+ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev); -+ struct usb_hcd *hcd; -+ -+ if (!crisv10_hcd) -+ return 0; -+ hcd = crisv10_hcd_to_hcd(crisv10_hcd); -+ -+ -+ /* Stop USB Controller in Etrax 100LX */ -+ crisv10_hcd_reset(hcd); -+ -+ usb_remove_hcd(hcd); -+ devdrv_dbg("Removed HCD from USB Core\n"); -+ -+ /* Free USB Controller IRQ */ -+ free_irq(ETRAX_USB_HC_IRQ, NULL); -+ -+ /* Free resources */ -+ tc_dma_destroy(); -+ tc_destroy(); -+ -+ -+ if(port_in_use(0)) { -+ cris_free_io_interface(if_usb_1); -+ } -+ if(port_in_use(1)) { -+ cris_free_io_interface(if_usb_2); -+ } -+ -+ devdrv_dbg("Freed all claimed resources\n"); -+ -+ return 0; -+} -+ -+ -+#ifdef CONFIG_PM -+ -+static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level) -+{ -+ return 0; /* no-op for now */ -+} -+ -+static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level) -+{ -+ return 0; /* no-op for now */ -+} -+ -+#endif /* CONFIG_PM */ -+ -+ -+ -+/*************************************************************/ -+/*************************************************************/ -+/* Module block */ -+/*************************************************************/ -+/*************************************************************/ -+ -+/* register driver */ -+static int __init module_hcd_init(void) -+{ -+ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ /* Here we select enabled ports by following defines created from -+ menuconfig */ -+#ifndef CONFIG_ETRAX_USB_HOST_PORT1 -+ ports &= ~(1<<0); -+#endif -+#ifndef CONFIG_ETRAX_USB_HOST_PORT2 -+ ports &= ~(1<<1); -+#endif - -- /* Now we are free to remove it and its SB descriptor. -- Note that it is assumed here that there is only one sb in the -- sb list for this ep. */ -- kmem_cache_free(usb_desc_cache, phys_to_virt(unlink_ep->sub)); -- kmem_cache_free(usb_desc_cache, (USB_EP_Desc_t *)unlink_ep); -- } -+ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc); - -- curr_ep = phys_to_virt(curr_ep->next); -+ devdrv_hc_platform_device = -+ platform_device_register_simple((char *) hc_name, 0, NULL, 0); - -- } while (curr_ep != first_ep); -- urb->hcpriv = NULL; -+ if (IS_ERR(devdrv_hc_platform_device)) -+ return PTR_ERR(devdrv_hc_platform_device); -+ return driver_register(&devdrv_hc_device_driver); -+ /* -+ * Note that we do not set the DMA mask for the device, -+ * i.e. we pretend that we will use PIO, since no specific -+ * allocation routines are needed for DMA buffers. This will -+ * cause the HCD buffer allocation routines to fall back to -+ * kmalloc(). -+ */ - } - --void etrax_usb_do_intr_recover(int epid) --{ -- USB_EP_Desc_t *first_ep, *tmp_ep; -+/* unregister driver */ -+static void __exit module_hcd_exit(void) -+{ -+ driver_unregister(&devdrv_hc_device_driver); -+} - -- DBFENTER; -- -- first_ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB2_EP); -- tmp_ep = first_ep; -- -- /* What this does is simply to walk the list of interrupt -- ep descriptors and enable those that are disabled. */ -- -- do { -- if (IO_EXTRACT(USB_EP_command, epid, tmp_ep->command) == epid && -- !(tmp_ep->command & IO_MASK(USB_EP_command, enable))) { -- tmp_ep->command |= IO_STATE(USB_EP_command, enable, yes); -- } -- -- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); -- -- } while (tmp_ep != first_ep); -- -- -- DBFEXIT; --} -- --static int etrax_rh_unlink_urb (struct urb *urb) --{ -- etrax_hc_t *hc; -- -- DBFENTER; -- -- hc = urb->dev->bus->hcpriv; -- -- if (hc->rh.urb == urb) { -- hc->rh.send = 0; -- del_timer(&hc->rh.rh_int_timer); -- } -- -- DBFEXIT; -- return 0; --} -- --static void etrax_rh_send_irq(struct urb *urb) --{ -- __u16 data = 0; -- etrax_hc_t *hc = urb->dev->bus->hcpriv; -- DBFENTER; -- --/* -- dbg_rh("R_USB_FM_NUMBER : 0x%08X", *R_USB_FM_NUMBER); -- dbg_rh("R_USB_FM_REMAINING: 0x%08X", *R_USB_FM_REMAINING); --*/ -- -- data |= (hc->rh.wPortChange_1) ? (1 << 1) : 0; -- data |= (hc->rh.wPortChange_2) ? (1 << 2) : 0; -- -- *((__u16 *)urb->transfer_buffer) = cpu_to_le16(data); -- /* FIXME: Why is actual_length set to 1 when data is 2 bytes? -- Since only 1 byte is used, why not declare data as __u8? */ -- urb->actual_length = 1; -- urb->status = 0; -- -- if (hc->rh.send && urb->complete) { -- dbg_rh("wPortChange_1: 0x%04X", hc->rh.wPortChange_1); -- dbg_rh("wPortChange_2: 0x%04X", hc->rh.wPortChange_2); -- -- urb->complete(urb, NULL); -- } -- -- DBFEXIT; --} -- --static void etrax_rh_init_int_timer(struct urb *urb) --{ -- etrax_hc_t *hc; -- -- DBFENTER; -- -- hc = urb->dev->bus->hcpriv; -- hc->rh.interval = urb->interval; -- init_timer(&hc->rh.rh_int_timer); -- hc->rh.rh_int_timer.function = etrax_rh_int_timer_do; -- hc->rh.rh_int_timer.data = (unsigned long)urb; -- /* FIXME: Is the jiffies resolution enough? All intervals < 10 ms will be mapped -- to 0, and the rest to the nearest lower 10 ms. */ -- hc->rh.rh_int_timer.expires = jiffies + ((HZ * hc->rh.interval) / 1000); -- add_timer(&hc->rh.rh_int_timer); -- -- DBFEXIT; --} -- --static void etrax_rh_int_timer_do(unsigned long ptr) --{ -- struct urb *urb; -- etrax_hc_t *hc; -- -- DBFENTER; -- -- urb = (struct urb*)ptr; -- hc = urb->dev->bus->hcpriv; -- -- if (hc->rh.send) { -- etrax_rh_send_irq(urb); -- } -- -- DBFEXIT; --} -- --static int etrax_usb_setup_epid(struct urb *urb) --{ -- int epid; -- char devnum, endpoint, out_traffic, slow; -- int maxlen; -- unsigned long flags; -- -- DBFENTER; -- -- epid = etrax_usb_lookup_epid(urb); -- if ((epid != -1)){ -- /* An epid that fits this urb has been found. */ -- DBFEXIT; -- return epid; -- } -- -- /* We must find and initiate a new epid for this urb. */ -- epid = etrax_usb_allocate_epid(); -- -- if (epid == -1) { -- /* Failed to allocate a new epid. */ -- DBFEXIT; -- return epid; -- } -- -- /* We now have a new epid to use. Initiate it. */ -- set_bit(epid, (void *)&epid_usage_bitmask); -- -- devnum = usb_pipedevice(urb->pipe); -- endpoint = usb_pipeendpoint(urb->pipe); -- slow = usb_pipeslow(urb->pipe); -- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { -- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ -- out_traffic = 1; -- } else { -- out_traffic = usb_pipeout(urb->pipe); -- } -- -- save_flags(flags); -- cli(); -- -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- -- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -- *R_USB_EPT_DATA_ISO = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | -- /* FIXME: Change any to the actual port? */ -- IO_STATE(R_USB_EPT_DATA_ISO, port, any) | -- IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | -- IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | -- IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); -- } else { -- *R_USB_EPT_DATA = IO_STATE(R_USB_EPT_DATA, valid, yes) | -- IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | -- /* FIXME: Change any to the actual port? */ -- IO_STATE(R_USB_EPT_DATA, port, any) | -- IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | -- IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | -- IO_FIELD(R_USB_EPT_DATA, dev, devnum); -- } -- -- restore_flags(flags); -- -- if (out_traffic) { -- set_bit(epid, (void *)&epid_out_traffic); -- } else { -- clear_bit(epid, (void *)&epid_out_traffic); -- } -- -- dbg_epid("Setting up epid %d with devnum %d, endpoint %d and max_len %d (%s)", -- epid, devnum, endpoint, maxlen, out_traffic ? "OUT" : "IN"); -- -- DBFEXIT; -- return epid; --} -- --static void etrax_usb_free_epid(int epid) --{ -- unsigned long flags; -- -- DBFENTER; -- -- if (!test_bit(epid, (void *)&epid_usage_bitmask)) { -- warn("Trying to free unused epid %d", epid); -- DBFEXIT; -- return; -- } -- -- save_flags(flags); -- cli(); -- -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- while (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)); -- /* This will, among other things, set the valid field to 0. */ -- *R_USB_EPT_DATA = 0; -- restore_flags(flags); -- -- clear_bit(epid, (void *)&epid_usage_bitmask); -- -- -- dbg_epid("Freed epid %d", epid); -- -- DBFEXIT; --} -- --static int etrax_usb_lookup_epid(struct urb *urb) --{ -- int i; -- __u32 data; -- char devnum, endpoint, slow, out_traffic; -- int maxlen; -- unsigned long flags; -- -- DBFENTER; -- -- devnum = usb_pipedevice(urb->pipe); -- endpoint = usb_pipeendpoint(urb->pipe); -- slow = usb_pipeslow(urb->pipe); -- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { -- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ -- out_traffic = 1; -- } else { -- out_traffic = usb_pipeout(urb->pipe); -- } -- -- /* Step through att epids. */ -- for (i = 0; i < NBR_OF_EPIDS; i++) { -- if (test_bit(i, (void *)&epid_usage_bitmask) && -- test_bit(i, (void *)&epid_out_traffic) == out_traffic) { -- -- save_flags(flags); -- cli(); -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, i); -- nop(); -- -- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -- data = *R_USB_EPT_DATA_ISO; -- restore_flags(flags); -- -- if ((IO_MASK(R_USB_EPT_DATA_ISO, valid) & data) && -- (IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, data) == devnum) && -- (IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, data) == endpoint) && -- (IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, data) == maxlen)) { -- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", -- i, devnum, endpoint, out_traffic ? "OUT" : "IN"); -- DBFEXIT; -- return i; -- } -- } else { -- data = *R_USB_EPT_DATA; -- restore_flags(flags); -- -- if ((IO_MASK(R_USB_EPT_DATA, valid) & data) && -- (IO_EXTRACT(R_USB_EPT_DATA, dev, data) == devnum) && -- (IO_EXTRACT(R_USB_EPT_DATA, ep, data) == endpoint) && -- (IO_EXTRACT(R_USB_EPT_DATA, low_speed, data) == slow) && -- (IO_EXTRACT(R_USB_EPT_DATA, max_len, data) == maxlen)) { -- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", -- i, devnum, endpoint, out_traffic ? "OUT" : "IN"); -- DBFEXIT; -- return i; -- } -- } -- } -- } -- -- DBFEXIT; -- return -1; --} -- --static int etrax_usb_allocate_epid(void) --{ -- int i; -- -- DBFENTER; -- -- for (i = 0; i < NBR_OF_EPIDS; i++) { -- if (!test_bit(i, (void *)&epid_usage_bitmask)) { -- dbg_epid("Found free epid %d", i); -- DBFEXIT; -- return i; -- } -- } -- -- dbg_epid("Found no free epids"); -- DBFEXIT; -- return -1; --} -- --static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags) --{ -- etrax_hc_t *hc; -- int ret = -EINVAL; -- -- DBFENTER; -- -- if (!urb->dev || !urb->dev->bus) { -- return -ENODEV; -- } -- if (usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)) <= 0) { -- info("Submit urb to pipe with maxpacketlen 0, pipe 0x%X\n", urb->pipe); -- return -EMSGSIZE; -- } -- -- if (urb->timeout) { -- /* FIXME. */ -- warn("urb->timeout specified, ignoring."); -- } -- -- hc = (etrax_hc_t*)urb->dev->bus->hcpriv; -- -- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { -- /* This request is for the Virtual Root Hub. */ -- ret = etrax_rh_submit_urb(urb); -- -- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { -- -- ret = etrax_usb_submit_bulk_urb(urb); -- -- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { -- -- ret = etrax_usb_submit_ctrl_urb(urb); -- -- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { -- int bustime; -- -- if (urb->bandwidth == 0) { -- bustime = usb_check_bandwidth(urb->dev, urb); -- if (bustime < 0) { -- ret = bustime; -- } else { -- ret = etrax_usb_submit_intr_urb(urb); -- if (ret == 0) -- usb_claim_bandwidth(urb->dev, urb, bustime, 0); -- } -- } else { -- /* Bandwidth already set. */ -- ret = etrax_usb_submit_intr_urb(urb); -- } -- -- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -- int bustime; -- -- if (urb->bandwidth == 0) { -- bustime = usb_check_bandwidth(urb->dev, urb); -- if (bustime < 0) { -- ret = bustime; -- } else { -- ret = etrax_usb_submit_isoc_urb(urb); -- if (ret == 0) -- usb_claim_bandwidth(urb->dev, urb, bustime, 0); -- } -- } else { -- /* Bandwidth already set. */ -- ret = etrax_usb_submit_isoc_urb(urb); -- } -- } -- -- DBFEXIT; -- -- if (ret != 0) -- printk("Submit URB error %d\n", ret); -- -- return ret; --} -- --static int etrax_usb_unlink_urb(struct urb *urb, int status) --{ -- etrax_hc_t *hc; -- etrax_urb_priv_t *urb_priv; -- int epid; -- unsigned int flags; -- -- DBFENTER; -- -- if (!urb) { -- return -EINVAL; -- } -- -- /* Disable interrupts here since a descriptor interrupt for the isoc epid -- will modify the sb list. This could possibly be done more granular, but -- unlink_urb should not be used frequently anyway. -- */ -- -- save_flags(flags); -- cli(); -- -- if (!urb->dev || !urb->dev->bus) { -- restore_flags(flags); -- return -ENODEV; -- } -- if (!urb->hcpriv) { -- /* This happens if a device driver calls unlink on an urb that -- was never submitted (lazy driver) or if the urb was completed -- while unlink was being called. */ -- restore_flags(flags); -- return 0; -- } -- if (urb->transfer_flags & URB_ASYNC_UNLINK) { -- /* FIXME. */ -- /* If URB_ASYNC_UNLINK is set: -- unlink -- move to a separate urb list -- call complete at next sof with ECONNRESET -- -- If not: -- wait 1 ms -- unlink -- call complete with ENOENT -- */ -- warn("URB_ASYNC_UNLINK set, ignoring."); -- } -- -- /* One might think that urb->status = -EINPROGRESS would be a requirement for unlinking, -- but that doesn't work for interrupt and isochronous traffic since they are completed -- repeatedly, and urb->status is set then. That may in itself be a bug though. */ -- -- hc = urb->dev->bus->hcpriv; -- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- epid = urb_priv->epid; -- -- /* Set the urb status (synchronous unlink). */ -- urb->status = -ENOENT; -- urb_priv->urb_state = UNLINK; -- -- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { -- int ret; -- ret = etrax_rh_unlink_urb(urb); -- DBFEXIT; -- restore_flags(flags); -- return ret; -- -- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { -- -- dbg_bulk("Unlink of bulk urb (0x%lx)", (unsigned long)urb); -- -- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -- /* The EP was enabled, disable it and wait. */ -- TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -- -- /* Ah, the luxury of busy-wait. */ -- while (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[epid])); -- } -- /* Kicking dummy list out of the party. */ -- TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); -- -- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { -- -- dbg_ctrl("Unlink of ctrl urb (0x%lx)", (unsigned long)urb); -- -- if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -- /* The EP was enabled, disable it and wait. */ -- TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -- -- /* Ah, the luxury of busy-wait. */ -- while (*R_DMA_CH8_SUB1_EP == virt_to_phys(&TxCtrlEPList[epid])); -- } -- -- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { -- -- dbg_intr("Unlink of intr urb (0x%lx)", (unsigned long)urb); -- -- /* Separate function because it's a tad more complicated. */ -- etrax_usb_unlink_intr_urb(urb); -- -- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -- -- dbg_isoc("Unlink of isoc urb (0x%lx)", (unsigned long)urb); -- -- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -- /* The EP was enabled, disable it and wait. */ -- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -- -- /* Ah, the luxury of busy-wait. */ -- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); -- } -- } -- -- /* Note that we need to remove the urb from the urb list *before* removing its SB -- descriptors. (This means that the isoc eof handler might get a null urb when we -- are unlinking the last urb.) */ -- -- if (usb_pipetype(urb->pipe) == PIPE_BULK) { -- -- urb_list_del(urb, epid); -- TxBulkEPList[epid].sub = 0; -- etrax_remove_from_sb_list(urb); -- -- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { -- -- urb_list_del(urb, epid); -- TxCtrlEPList[epid].sub = 0; -- etrax_remove_from_sb_list(urb); -- -- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { -- -- urb_list_del(urb, epid); -- /* Sanity check (should never happen). */ -- assert(urb_list_empty(epid)); -- -- /* Release allocated bandwidth. */ -- usb_release_bandwidth(urb->dev, urb, 0); -- -- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -- -- if (usb_pipeout(urb->pipe)) { -- -- USB_SB_Desc_t *iter_sb, *prev_sb, *next_sb; -- -- if (__urb_list_entry(urb, epid)) { -- -- urb_list_del(urb, epid); -- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; -- prev_sb = 0; -- while (iter_sb && (iter_sb != urb_priv->first_sb)) { -- prev_sb = iter_sb; -- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -- } -- -- if (iter_sb == 0) { -- /* Unlink of the URB currently being transmitted. */ -- prev_sb = 0; -- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; -- } -- -- while (iter_sb && (iter_sb != urb_priv->last_sb)) { -- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -- } -- if (iter_sb) { -- next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -- } else { -- /* This should only happen if the DMA has completed -- processing the SB list for this EP while interrupts -- are disabled. */ -- dbg_isoc("Isoc urb not found, already sent?"); -- next_sb = 0; -- } -- if (prev_sb) { -- prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; -- } else { -- TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; -- } -- -- etrax_remove_from_sb_list(urb); -- if (urb_list_empty(epid)) { -- TxIsocEPList[epid].sub = 0; -- dbg_isoc("Last isoc out urb epid %d", epid); -- } else if (next_sb || prev_sb) { -- dbg_isoc("Re-enable isoc out epid %d", epid); -- -- TxIsocEPList[epid].hw_len = 0; -- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -- } else { -- TxIsocEPList[epid].sub = 0; -- dbg_isoc("URB list non-empty and no SB list, EP disabled"); -- } -- } else { -- dbg_isoc("Urb 0x%p not found, completed already?", urb); -- } -- } else { -- -- urb_list_del(urb, epid); -- -- /* For in traffic there is only one SB descriptor for each EP even -- though there may be several urbs (all urbs point at the same SB). */ -- if (urb_list_empty(epid)) { -- /* No more urbs, remove the SB. */ -- TxIsocEPList[epid].sub = 0; -- etrax_remove_from_sb_list(urb); -- } else { -- TxIsocEPList[epid].hw_len = 0; -- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -- } -- } -- /* Release allocated bandwidth. */ -- usb_release_bandwidth(urb->dev, urb, 1); -- } -- /* Free the epid if urb list is empty. */ -- if (urb_list_empty(epid)) { -- etrax_usb_free_epid(epid); -- } -- restore_flags(flags); -- -- /* Must be done before calling completion handler. */ -- kfree(urb_priv); -- urb->hcpriv = 0; -- -- if (urb->complete) { -- urb->complete(urb, NULL); -- } -- -- DBFEXIT; -- return 0; --} -- --static int etrax_usb_get_frame_number(struct usb_device *usb_dev) --{ -- DBFENTER; -- DBFEXIT; -- return (*R_USB_FM_NUMBER & 0x7ff); --} -- --static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc) --{ -- DBFENTER; -- -- /* This interrupt handler could be used when unlinking EP descriptors. */ -- -- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { -- USB_EP_Desc_t *ep; -- -- //dbg_bulk("dma8_sub0_descr (BULK) intr."); -- -- /* It should be safe clearing the interrupt here, since we don't expect to get a new -- one until we restart the bulk channel. */ -- *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); -- -- /* Wait while the DMA is running (though we don't expect it to be). */ -- while (*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)); -- -- /* Advance the DMA to the next EP descriptor. */ -- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); -- -- //dbg_bulk("descr intr: DMA is at 0x%lx", (unsigned long)ep); -- -- /* ep->next is already a physical address; no need for a virt_to_phys. */ -- *R_DMA_CH8_SUB0_EP = ep->next; -- -- /* Start the DMA bulk channel again. */ -- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); -- } -- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { -- struct urb *urb; -- int epid; -- etrax_urb_priv_t *urb_priv; -- unsigned long int flags; -- -- dbg_ctrl("dma8_sub1_descr (CTRL) intr."); -- *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); -- -- /* The complete callback gets called so we cli. */ -- save_flags(flags); -- cli(); -- -- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -- if ((TxCtrlEPList[epid].sub == 0) || -- (epid == DUMMY_EPID) || -- (epid == INVALID_EPID)) { -- /* Nothing here to see. */ -- continue; -- } -- -- /* Get the first urb (if any). */ -- urb = urb_list_first(epid); -- -- if (urb) { -- -- /* Sanity check. */ -- assert(usb_pipetype(urb->pipe) == PIPE_CONTROL); -- -- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- assert(urb_priv); -- -- if (urb_priv->urb_state == WAITING_FOR_DESCR_INTR) { -- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); -- -- etrax_usb_complete_urb(urb, 0); -- } -- } -- } -- restore_flags(flags); -- } -- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { -- dbg_intr("dma8_sub2_descr (INTR) intr."); -- *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); -- } -- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { -- struct urb *urb; -- int epid; -- int epid_done; -- etrax_urb_priv_t *urb_priv; -- USB_SB_Desc_t *sb_desc; -- -- usb_isoc_complete_data_t *comp_data = NULL; -- -- /* One or more isoc out transfers are done. */ -- dbg_isoc("dma8_sub3_descr (ISOC) intr."); -- -- /* For each isoc out EP search for the first sb_desc with the intr flag -- set. This descriptor must be the last packet from an URB. Then -- traverse the URB list for the EP until the URB with urb_priv->last_sb -- matching the intr-marked sb_desc is found. All URBs before this have -- been sent. -- */ -- -- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -- /* Skip past epids with no SB lists, epids used for in traffic, -- and special (dummy, invalid) epids. */ -- if ((TxIsocEPList[epid].sub == 0) || -- (test_bit(epid, (void *)&epid_out_traffic) == 0) || -- (epid == DUMMY_EPID) || -- (epid == INVALID_EPID)) { -- /* Nothing here to see. */ -- continue; -- } -- sb_desc = phys_to_virt(TxIsocEPList[epid].sub); -- -- /* Find the last descriptor of the currently active URB for this ep. -- This is the first descriptor in the sub list marked for a descriptor -- interrupt. */ -- while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { -- sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; -- } -- assert(sb_desc); -- -- dbg_isoc("Check epid %d, sub 0x%p, SB 0x%p", -- epid, -- phys_to_virt(TxIsocEPList[epid].sub), -- sb_desc); -- -- epid_done = 0; -- -- /* Get the first urb (if any). */ -- urb = urb_list_first(epid); -- assert(urb); -- -- while (urb && !epid_done) { -- -- /* Sanity check. */ -- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -- -- if (!usb_pipeout(urb->pipe)) { -- /* descr interrupts are generated only for out pipes. */ -- epid_done = 1; -- continue; -- } -- -- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- assert(urb_priv); -- -- if (sb_desc != urb_priv->last_sb) { -- -- /* This urb has been sent. */ -- dbg_isoc("out URB 0x%p sent", urb); -- -- urb_priv->urb_state = TRANSFER_DONE; -- -- } else if ((sb_desc == urb_priv->last_sb) && -- !(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { -- -- assert((sb_desc->command & IO_MASK(USB_SB_command, eol)) == IO_STATE(USB_SB_command, eol, yes)); -- assert(sb_desc->next == 0); -- -- dbg_isoc("out URB 0x%p last in list, epid disabled", urb); -- TxIsocEPList[epid].sub = 0; -- TxIsocEPList[epid].hw_len = 0; -- urb_priv->urb_state = TRANSFER_DONE; -- -- epid_done = 1; -- -- } else { -- epid_done = 1; -- } -- if (!epid_done) { -- urb = urb_list_next(urb, epid); -- } -- } -- -- } -- -- *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); -- -- comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC); -- assert(comp_data != NULL); -- -- INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data); -- schedule_work(&comp_data->usb_bh); -- } -- -- DBFEXIT; -- return IRQ_HANDLED; --} -- --static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data) --{ -- usb_isoc_complete_data_t *comp_data = (usb_isoc_complete_data_t*)data; -- -- struct urb *urb; -- int epid; -- int epid_done; -- etrax_urb_priv_t *urb_priv; -- -- DBFENTER; -- -- dbg_isoc("dma8_sub3_descr (ISOC) bottom half."); -- -- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -- unsigned long flags; -- -- save_flags(flags); -- cli(); -- -- epid_done = 0; -- -- /* The descriptor interrupt handler has marked all transmitted isoch. out -- URBs with TRANSFER_DONE. Now we traverse all epids and for all that -- have isoch. out traffic traverse its URB list and complete the -- transmitted URB. -- */ -- -- while (!epid_done) { -- -- /* Get the first urb (if any). */ -- urb = urb_list_first(epid); -- if (urb == 0) { -- epid_done = 1; -- continue; -- } -- -- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { -- epid_done = 1; -- continue; -- } -- -- if (!usb_pipeout(urb->pipe)) { -- /* descr interrupts are generated only for out pipes. */ -- epid_done = 1; -- continue; -- } -- -- dbg_isoc("Check epid %d, SB 0x%p", epid, (char*)TxIsocEPList[epid].sub); -- -- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- assert(urb_priv); -- -- if (urb_priv->urb_state == TRANSFER_DONE) { -- int i; -- struct usb_iso_packet_descriptor *packet; -- -- /* This urb has been sent. */ -- dbg_isoc("Completing isoc out URB 0x%p", urb); -- -- for (i = 0; i < urb->number_of_packets; i++) { -- packet = &urb->iso_frame_desc[i]; -- packet->status = 0; -- packet->actual_length = packet->length; -- } -- -- etrax_usb_complete_isoc_urb(urb, 0); -- -- if (urb_list_empty(epid)) { -- etrax_usb_free_epid(epid); -- epid_done = 1; -- } -- } else { -- epid_done = 1; -- } -- } -- restore_flags(flags); -- -- } -- kmem_cache_free(isoc_compl_cache, comp_data); -- -- DBFEXIT; --} -- -- -- --static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc) --{ -- struct urb *urb; -- etrax_urb_priv_t *urb_priv; -- int epid = 0; -- unsigned long flags; -- -- /* Isoc diagnostics. */ -- static int curr_fm = 0; -- static int prev_fm = 0; -- -- DBFENTER; -- -- /* Clear this interrupt. */ -- *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); -- -- /* Note that this while loop assumes that all packets span only -- one rx descriptor. */ -- -- /* The reason we cli here is that we call the driver's callback functions. */ -- save_flags(flags); -- cli(); -- -- while (myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { -- -- epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); -- urb = urb_list_first(epid); -- -- //printk("eop for epid %d, first urb 0x%lx\n", epid, (unsigned long)urb); -- -- if (!urb) { -- err("No urb for epid %d in rx interrupt", epid); -- __dump_ept_data(epid); -- goto skip_out; -- } -- -- /* Note that we cannot indescriminately assert(usb_pipein(urb->pipe)) since -- ctrl pipes are not. */ -- -- if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { -- __u32 r_usb_ept_data; -- int no_error = 0; -- -- assert(test_bit(epid, (void *)&epid_usage_bitmask)); -- -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -- r_usb_ept_data = *R_USB_EPT_DATA_ISO; -- -- if ((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && -- (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && -- (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { -- /* Not an error, just a failure to receive an expected iso -- in packet in this frame. This is not documented -- in the designers reference. -- */ -- no_error++; -- } else { -- warn("R_USB_EPT_DATA_ISO for epid %d = 0x%x", epid, r_usb_ept_data); -- } -- } else { -- r_usb_ept_data = *R_USB_EPT_DATA; -- warn("R_USB_EPT_DATA for epid %d = 0x%x", epid, r_usb_ept_data); -- } -- -- if (!no_error){ -- warn("error in rx desc->status, epid %d, first urb = 0x%lx", -- epid, (unsigned long)urb); -- __dump_in_desc(myNextRxDesc); -- -- warn("R_USB_STATUS = 0x%x", *R_USB_STATUS); -- -- /* Check that ept was disabled when error occurred. */ -- switch (usb_pipetype(urb->pipe)) { -- case PIPE_BULK: -- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); -- break; -- case PIPE_CONTROL: -- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); -- break; -- case PIPE_INTERRUPT: -- assert(!(TxIntrEPList[epid].command & IO_MASK(USB_EP_command, enable))); -- break; -- case PIPE_ISOCHRONOUS: -- assert(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))); -- break; -- default: -- warn("etrax_usb_rx_interrupt: bad pipetype %d in urb 0x%p", -- usb_pipetype(urb->pipe), -- urb); -- } -- etrax_usb_complete_urb(urb, -EPROTO); -- goto skip_out; -- } -- } -- -- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- assert(urb_priv); -- -- if ((usb_pipetype(urb->pipe) == PIPE_BULK) || -- (usb_pipetype(urb->pipe) == PIPE_CONTROL) || -- (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { -- -- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { -- /* We get nodata for empty data transactions, and the rx descriptor's -- hw_len field is not valid in that case. No data to copy in other -- words. */ -- } else { -- /* Make sure the data fits in the buffer. */ -- assert(urb_priv->rx_offset + myNextRxDesc->hw_len -- <= urb->transfer_buffer_length); -- -- memcpy(urb->transfer_buffer + urb_priv->rx_offset, -- phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); -- urb_priv->rx_offset += myNextRxDesc->hw_len; -- } -- -- if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { -- if ((usb_pipetype(urb->pipe) == PIPE_CONTROL) && -- ((TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)) == -- IO_STATE(USB_EP_command, enable, yes))) { -- /* The EP is still enabled, so the OUT packet used to ack -- the in data is probably not processed yet. If the EP -- sub pointer has not moved beyond urb_priv->last_sb mark -- it for a descriptor interrupt and complete the urb in -- the descriptor interrupt handler. -- */ -- USB_SB_Desc_t *sub = TxCtrlEPList[urb_priv->epid].sub ? phys_to_virt(TxCtrlEPList[urb_priv->epid].sub) : 0; -- -- while ((sub != NULL) && (sub != urb_priv->last_sb)) { -- sub = sub->next ? phys_to_virt(sub->next) : 0; -- } -- if (sub != NULL) { -- /* The urb has not been fully processed. */ -- urb_priv->urb_state = WAITING_FOR_DESCR_INTR; -- } else { -- warn("(CTRL) epid enabled and urb (0x%p) processed, ep->sub=0x%p", urb, (char*)TxCtrlEPList[urb_priv->epid].sub); -- etrax_usb_complete_urb(urb, 0); -- } -- } else { -- etrax_usb_complete_urb(urb, 0); -- } -- } -- -- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -- -- struct usb_iso_packet_descriptor *packet; -- -- if (urb_priv->urb_state == UNLINK) { -- info("Ignoring rx data for urb being unlinked."); -- goto skip_out; -- } else if (urb_priv->urb_state == NOT_STARTED) { -- info("What? Got rx data for urb that isn't started?"); -- goto skip_out; -- } -- -- packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; -- packet->status = 0; -- -- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { -- /* We get nodata for empty data transactions, and the rx descriptor's -- hw_len field is not valid in that case. We copy 0 bytes however to -- stay in synch. */ -- packet->actual_length = 0; -- } else { -- packet->actual_length = myNextRxDesc->hw_len; -- /* Make sure the data fits in the buffer. */ -- assert(packet->actual_length <= packet->length); -- memcpy(urb->transfer_buffer + packet->offset, -- phys_to_virt(myNextRxDesc->buf), packet->actual_length); -- } -- -- /* Increment the packet counter. */ -- urb_priv->isoc_packet_counter++; -- -- /* Note that we don't care about the eot field in the rx descriptor's status. -- It will always be set for isoc traffic. */ -- if (urb->number_of_packets == urb_priv->isoc_packet_counter) { -- -- /* Out-of-synch diagnostics. */ -- curr_fm = (*R_USB_FM_NUMBER & 0x7ff); -- if (((prev_fm + urb_priv->isoc_packet_counter) % (0x7ff + 1)) != curr_fm) { -- /* This test is wrong, if there is more than one isoc -- in endpoint active it will always calculate wrong -- since prev_fm is shared by all endpoints. -- -- FIXME Make this check per URB using urb->start_frame. -- */ -- dbg_isoc("Out of synch? Previous frame = %d, current frame = %d", -- prev_fm, curr_fm); -- -- } -- prev_fm = curr_fm; -- -- /* Complete the urb with status OK. */ -- etrax_usb_complete_isoc_urb(urb, 0); -- } -- } -- -- skip_out: -- -- /* DMA IN cache bug. Flush the DMA IN buffer from the cache. (struct etrax_dma_descr -- has the same layout as USB_IN_Desc for the relevant fields.) */ -- prepare_rx_descriptor((struct etrax_dma_descr*)myNextRxDesc); -- -- myPrevRxDesc = myNextRxDesc; -- myPrevRxDesc->command |= IO_MASK(USB_IN_command, eol); -- myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); -- myLastRxDesc = myPrevRxDesc; -- -- myNextRxDesc->status = 0; -- myNextRxDesc = phys_to_virt(myNextRxDesc->next); -- } -- -- restore_flags(flags); -- -- DBFEXIT; -- -- return IRQ_HANDLED; --} -- -- --/* This function will unlink the SB descriptors associated with this urb. */ --static int etrax_remove_from_sb_list(struct urb *urb) --{ -- USB_SB_Desc_t *next_sb, *first_sb, *last_sb; -- etrax_urb_priv_t *urb_priv; -- int i = 0; -- -- DBFENTER; -- -- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- assert(urb_priv); -- -- /* Just a sanity check. Since we don't fiddle with the DMA list the EP descriptor -- doesn't really need to be disabled, it's just that we expect it to be. */ -- if (usb_pipetype(urb->pipe) == PIPE_BULK) { -- assert(!(TxBulkEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); -- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { -- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); -- } -- -- first_sb = urb_priv->first_sb; -- last_sb = urb_priv->last_sb; -- -- assert(first_sb); -- assert(last_sb); -- -- while (first_sb != last_sb) { -- next_sb = (USB_SB_Desc_t *)phys_to_virt(first_sb->next); -- kmem_cache_free(usb_desc_cache, first_sb); -- first_sb = next_sb; -- i++; -- } -- kmem_cache_free(usb_desc_cache, last_sb); -- i++; -- dbg_sb("%d SB descriptors freed", i); -- /* Compare i with urb->number_of_packets for Isoc traffic. -- Should be same when calling unlink_urb */ -- -- DBFEXIT; -- -- return i; --} -- --static int etrax_usb_submit_bulk_urb(struct urb *urb) --{ -- int epid; -- int empty; -- unsigned long flags; -- etrax_urb_priv_t *urb_priv; -- -- DBFENTER; -- -- /* Epid allocation, empty check and list add must be protected. -- Read about this in etrax_usb_submit_ctrl_urb. */ -- -- spin_lock_irqsave(&urb_list_lock, flags); -- epid = etrax_usb_setup_epid(urb); -- if (epid == -1) { -- DBFEXIT; -- spin_unlock_irqrestore(&urb_list_lock, flags); -- return -ENOMEM; -- } -- empty = urb_list_empty(epid); -- urb_list_add(urb, epid); -- spin_unlock_irqrestore(&urb_list_lock, flags); -- -- dbg_bulk("Adding bulk %s urb 0x%lx to %s list, epid %d", -- usb_pipein(urb->pipe) ? "IN" : "OUT", (unsigned long)urb, empty ? "empty" : "", epid); -- -- /* Mark the urb as being in progress. */ -- urb->status = -EINPROGRESS; -- -- /* Setup the hcpriv data. */ -- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); -- assert(urb_priv != NULL); -- /* This sets rx_offset to 0. */ -- urb_priv->urb_state = NOT_STARTED; -- urb->hcpriv = urb_priv; -- -- if (empty) { -- etrax_usb_add_to_bulk_sb_list(urb, epid); -- } -- -- DBFEXIT; -- -- return 0; --} -- --static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid) --{ -- USB_SB_Desc_t *sb_desc; -- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- unsigned long flags; -- char maxlen; -- -- DBFENTER; -- -- dbg_bulk("etrax_usb_add_to_bulk_sb_list, urb 0x%lx", (unsigned long)urb); -- -- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -- -- sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); -- assert(sb_desc != NULL); -- memset(sb_desc, 0, sizeof(USB_SB_Desc_t)); -- -- -- if (usb_pipeout(urb->pipe)) { -- -- dbg_bulk("Grabbing bulk OUT, urb 0x%lx, epid %d", (unsigned long)urb, epid); -- -- /* This is probably a sanity check of the bulk transaction length -- not being larger than 64 kB. */ -- if (urb->transfer_buffer_length > 0xffff) { -- panic("urb->transfer_buffer_length > 0xffff"); -- } -- -- sb_desc->sw_len = urb->transfer_buffer_length; -- -- /* The rem field is don't care if it's not a full-length transfer, so setting -- it shouldn't hurt. Also, rem isn't used for OUT traffic. */ -- sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | -- IO_STATE(USB_SB_command, tt, out) | -- IO_STATE(USB_SB_command, eot, yes) | -- IO_STATE(USB_SB_command, eol, yes)); -- -- /* The full field is set to yes, even if we don't actually check that this is -- a full-length transfer (i.e., that transfer_buffer_length % maxlen = 0). -- Setting full prevents the USB controller from sending an empty packet in -- that case. However, if URB_ZERO_PACKET was set we want that. */ -- if (!(urb->transfer_flags & URB_ZERO_PACKET)) { -- sb_desc->command |= IO_STATE(USB_SB_command, full, yes); -- } -- -- sb_desc->buf = virt_to_phys(urb->transfer_buffer); -- sb_desc->next = 0; -- -- } else if (usb_pipein(urb->pipe)) { -- -- dbg_bulk("Grabbing bulk IN, urb 0x%lx, epid %d", (unsigned long)urb, epid); -- -- sb_desc->sw_len = urb->transfer_buffer_length ? -- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; -- -- /* The rem field is don't care if it's not a full-length transfer, so setting -- it shouldn't hurt. */ -- sb_desc->command = -- (IO_FIELD(USB_SB_command, rem, -- urb->transfer_buffer_length % maxlen) | -- IO_STATE(USB_SB_command, tt, in) | -- IO_STATE(USB_SB_command, eot, yes) | -- IO_STATE(USB_SB_command, eol, yes)); -- -- sb_desc->buf = 0; -- sb_desc->next = 0; -- } -- -- urb_priv->first_sb = sb_desc; -- urb_priv->last_sb = sb_desc; -- urb_priv->epid = epid; -- -- urb->hcpriv = urb_priv; -- -- /* Reset toggle bits and reset error count. */ -- save_flags(flags); -- cli(); -- -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- -- /* FIXME: Is this a special case since the hold field is checked, -- or should we check hold in a lot of other cases as well? */ -- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { -- panic("Hold was set in %s", __FUNCTION__); -- } -- -- /* Reset error counters (regardless of which direction this traffic is). */ -- *R_USB_EPT_DATA &= -- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | -- IO_MASK(R_USB_EPT_DATA, error_count_out)); -- -- /* Software must preset the toggle bits. */ -- if (usb_pipeout(urb->pipe)) { -- char toggle = -- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); -- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); -- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); -- } else { -- char toggle = -- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); -- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); -- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); -- } -- -- /* Assert that the EP descriptor is disabled. */ -- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); -- -- /* The reason we set the EP's sub pointer directly instead of -- walking the SB list and linking it last in the list is that we only -- have one active urb at a time (the rest are queued). */ -- -- /* Note that we cannot have interrupts running when we have set the SB descriptor -- but the EP is not yet enabled. If a bulk eot happens for another EP, we will -- find this EP disabled and with a SB != 0, which will make us think that it's done. */ -- TxBulkEPList[epid].sub = virt_to_phys(sb_desc); -- TxBulkEPList[epid].hw_len = 0; -- /* Note that we don't have to fill in the ep_id field since this -- was done when we allocated the EP descriptors in init_tx_bulk_ep. */ -- -- /* Check if the dummy list is already with us (if several urbs were queued). */ -- if (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0])) { -- -- dbg_bulk("Inviting dummy list to the party for urb 0x%lx, epid %d", -- (unsigned long)urb, epid); -- -- /* The last EP in the dummy list already has its next pointer set to -- TxBulkEPList[epid].next. */ -- -- /* We don't need to check if the DMA is at this EP or not before changing the -- next pointer, since we will do it in one 32-bit write (EP descriptors are -- 32-bit aligned). */ -- TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); -- } -- /* Enable the EP descr. */ -- dbg_bulk("Enabling bulk EP for urb 0x%lx, epid %d", (unsigned long)urb, epid); -- TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -- -- /* Everything is set up, safe to enable interrupts again. */ -- restore_flags(flags); -- -- /* If the DMA bulk channel isn't running, we need to restart it if it -- has stopped at the last EP descriptor (DMA stopped because there was -- no more traffic) or if it has stopped at a dummy EP with the intr flag -- set (DMA stopped because we were too slow in inserting new traffic). */ -- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { -- -- USB_EP_Desc_t *ep; -- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); -- dbg_bulk("DMA channel not running in add"); -- dbg_bulk("DMA is at 0x%lx", (unsigned long)ep); -- -- if (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[NBR_OF_EPIDS - 1]) || -- (ep->command & 0x8) >> 3) { -- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); -- /* Update/restart the bulk start timer since we just started the channel. */ -- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); -- /* Update/restart the bulk eot timer since we just inserted traffic. */ -- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -- } -- } -- -- DBFEXIT; --} -- --static void etrax_usb_complete_bulk_urb(struct urb *urb, int status) --{ -- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- int epid = urb_priv->epid; -- unsigned long flags; -- -- DBFENTER; -- -- if (status) -- warn("Completing bulk urb with status %d.", status); -- -- dbg_bulk("Completing bulk urb 0x%lx for epid %d", (unsigned long)urb, epid); -- -- /* Update the urb list. */ -- urb_list_del(urb, epid); -- -- /* For an IN pipe, we always set the actual length, regardless of whether there was -- an error or not (which means the device driver can use the data if it wants to). */ -- if (usb_pipein(urb->pipe)) { -- urb->actual_length = urb_priv->rx_offset; -- } else { -- /* Set actual_length for OUT urbs also; the USB mass storage driver seems -- to want that. We wouldn't know of any partial writes if there was an error. */ -- if (status == 0) { -- urb->actual_length = urb->transfer_buffer_length; -- } else { -- urb->actual_length = 0; -- } -- } -- -- /* FIXME: Is there something of the things below we shouldn't do if there was an error? -- Like, maybe we shouldn't toggle the toggle bits, or maybe we shouldn't insert more traffic. */ -- -- save_flags(flags); -- cli(); -- -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- -- /* We need to fiddle with the toggle bits because the hardware doesn't do it for us. */ -- if (usb_pipeout(urb->pipe)) { -- char toggle = -- IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); -- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), -- usb_pipeout(urb->pipe), toggle); -- } else { -- char toggle = -- IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); -- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), -- usb_pipeout(urb->pipe), toggle); -- } -- restore_flags(flags); -- -- /* Remember to free the SBs. */ -- etrax_remove_from_sb_list(urb); -- kfree(urb_priv); -- urb->hcpriv = 0; -- -- /* If there are any more urb's in the list we'd better start sending */ -- if (!urb_list_empty(epid)) { -- -- struct urb *new_urb; -- -- /* Get the first urb. */ -- new_urb = urb_list_first(epid); -- assert(new_urb); -- -- dbg_bulk("More bulk for epid %d", epid); -- -- etrax_usb_add_to_bulk_sb_list(new_urb, epid); -- } -- -- urb->status = status; -- -- /* We let any non-zero status from the layer above have precedence. */ -- if (status == 0) { -- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) -- is to be treated as an error. */ -- if (urb->transfer_flags & URB_SHORT_NOT_OK) { -- if (usb_pipein(urb->pipe) && -- (urb->actual_length != -- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { -- urb->status = -EREMOTEIO; -- } -- } -- } -- -- if (urb->complete) { -- urb->complete(urb, NULL); -- } -- -- if (urb_list_empty(epid)) { -- /* This means that this EP is now free, deconfigure it. */ -- etrax_usb_free_epid(epid); -- -- /* No more traffic; time to clean up. -- Must set sub pointer to 0, since we look at the sub pointer when handling -- the bulk eot interrupt. */ -- -- dbg_bulk("No bulk for epid %d", epid); -- -- TxBulkEPList[epid].sub = 0; -- -- /* Unlink the dummy list. */ -- -- dbg_bulk("Kicking dummy list out of party for urb 0x%lx, epid %d", -- (unsigned long)urb, epid); -- -- /* No need to wait for the DMA before changing the next pointer. -- The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use -- the last one (INVALID_EPID) for actual traffic. */ -- TxBulkEPList[epid].next = -- virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); -- } -- -- DBFEXIT; --} -- --static int etrax_usb_submit_ctrl_urb(struct urb *urb) --{ -- int epid; -- int empty; -- unsigned long flags; -- etrax_urb_priv_t *urb_priv; -- -- DBFENTER; -- -- /* FIXME: Return -ENXIO if there is already a queued urb for this endpoint? */ -- -- /* Epid allocation, empty check and list add must be protected. -- -- Epid allocation because if we find an existing epid for this endpoint an urb might be -- completed (emptying the list) before we add the new urb to the list, causing the epid -- to be de-allocated. We would then start the transfer with an invalid epid -> epid attn. -- -- Empty check and add because otherwise we might conclude that the list is not empty, -- after which it becomes empty before we add the new urb to the list, causing us not to -- insert the new traffic into the SB list. */ -- -- spin_lock_irqsave(&urb_list_lock, flags); -- epid = etrax_usb_setup_epid(urb); -- if (epid == -1) { -- spin_unlock_irqrestore(&urb_list_lock, flags); -- DBFEXIT; -- return -ENOMEM; -- } -- empty = urb_list_empty(epid); -- urb_list_add(urb, epid); -- spin_unlock_irqrestore(&urb_list_lock, flags); -- -- dbg_ctrl("Adding ctrl urb 0x%lx to %s list, epid %d", -- (unsigned long)urb, empty ? "empty" : "", epid); -- -- /* Mark the urb as being in progress. */ -- urb->status = -EINPROGRESS; -- -- /* Setup the hcpriv data. */ -- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); -- assert(urb_priv != NULL); -- /* This sets rx_offset to 0. */ -- urb_priv->urb_state = NOT_STARTED; -- urb->hcpriv = urb_priv; -- -- if (empty) { -- etrax_usb_add_to_ctrl_sb_list(urb, epid); -- } -- -- DBFEXIT; -- -- return 0; --} -- --static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid) --{ -- USB_SB_Desc_t *sb_desc_setup; -- USB_SB_Desc_t *sb_desc_data; -- USB_SB_Desc_t *sb_desc_status; -- -- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- -- unsigned long flags; -- char maxlen; -- -- DBFENTER; -- -- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -- -- sb_desc_setup = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); -- assert(sb_desc_setup != NULL); -- sb_desc_status = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); -- assert(sb_desc_status != NULL); -- -- /* Initialize the mandatory setup SB descriptor (used only in control transfers) */ -- sb_desc_setup->sw_len = 8; -- sb_desc_setup->command = (IO_FIELD(USB_SB_command, rem, 0) | -- IO_STATE(USB_SB_command, tt, setup) | -- IO_STATE(USB_SB_command, full, yes) | -- IO_STATE(USB_SB_command, eot, yes)); -- -- sb_desc_setup->buf = virt_to_phys(urb->setup_packet); -- -- if (usb_pipeout(urb->pipe)) { -- dbg_ctrl("Transfer for epid %d is OUT", epid); -- -- /* If this Control OUT transfer has an optional data stage we add an OUT token -- before the mandatory IN (status) token, hence the reordered SB list */ -- -- sb_desc_setup->next = virt_to_phys(sb_desc_status); -- if (urb->transfer_buffer) { -- -- dbg_ctrl("This OUT transfer has an extra data stage"); -- -- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); -- assert(sb_desc_data != NULL); -- -- sb_desc_setup->next = virt_to_phys(sb_desc_data); -- -- sb_desc_data->sw_len = urb->transfer_buffer_length; -- sb_desc_data->command = (IO_STATE(USB_SB_command, tt, out) | -- IO_STATE(USB_SB_command, full, yes) | -- IO_STATE(USB_SB_command, eot, yes)); -- sb_desc_data->buf = virt_to_phys(urb->transfer_buffer); -- sb_desc_data->next = virt_to_phys(sb_desc_status); -- } -- -- sb_desc_status->sw_len = 1; -- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | -- IO_STATE(USB_SB_command, tt, in) | -- IO_STATE(USB_SB_command, eot, yes) | -- IO_STATE(USB_SB_command, intr, yes) | -- IO_STATE(USB_SB_command, eol, yes)); -- -- sb_desc_status->buf = 0; -- sb_desc_status->next = 0; -- -- } else if (usb_pipein(urb->pipe)) { -- -- dbg_ctrl("Transfer for epid %d is IN", epid); -- dbg_ctrl("transfer_buffer_length = %d", urb->transfer_buffer_length); -- dbg_ctrl("rem is calculated to %d", urb->transfer_buffer_length % maxlen); -- -- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); -- assert(sb_desc_data != NULL); -- -- sb_desc_setup->next = virt_to_phys(sb_desc_data); -- -- sb_desc_data->sw_len = urb->transfer_buffer_length ? -- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; -- dbg_ctrl("sw_len got %d", sb_desc_data->sw_len); -- -- sb_desc_data->command = -- (IO_FIELD(USB_SB_command, rem, -- urb->transfer_buffer_length % maxlen) | -- IO_STATE(USB_SB_command, tt, in) | -- IO_STATE(USB_SB_command, eot, yes)); -- -- sb_desc_data->buf = 0; -- sb_desc_data->next = virt_to_phys(sb_desc_status); -- -- /* Read comment at zout_buffer declaration for an explanation to this. */ -- sb_desc_status->sw_len = 1; -- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | -- IO_STATE(USB_SB_command, tt, zout) | -- IO_STATE(USB_SB_command, full, yes) | -- IO_STATE(USB_SB_command, eot, yes) | -- IO_STATE(USB_SB_command, intr, yes) | -- IO_STATE(USB_SB_command, eol, yes)); -- -- sb_desc_status->buf = virt_to_phys(&zout_buffer[0]); -- sb_desc_status->next = 0; -- } -- -- urb_priv->first_sb = sb_desc_setup; -- urb_priv->last_sb = sb_desc_status; -- urb_priv->epid = epid; -- -- urb_priv->urb_state = STARTED; -- -- /* Reset toggle bits and reset error count, remember to di and ei */ -- /* Warning: it is possible that this locking doesn't work with bottom-halves */ -- -- save_flags(flags); -- cli(); -- -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { -- panic("Hold was set in %s", __FUNCTION__); -- } -- -- -- /* FIXME: Compare with etrax_usb_add_to_bulk_sb_list where the toggle bits -- are set to a specific value. Why the difference? Read "Transfer and Toggle Bits -- in Designer's Reference, p. 8 - 11. */ -- *R_USB_EPT_DATA &= -- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | -- IO_MASK(R_USB_EPT_DATA, error_count_out) | -- IO_MASK(R_USB_EPT_DATA, t_in) | -- IO_MASK(R_USB_EPT_DATA, t_out)); -- -- /* Since we use the rx interrupt to complete ctrl urbs, we can enable interrupts now -- (i.e. we don't check the sub pointer on an eot interrupt like we do for bulk traffic). */ -- restore_flags(flags); -- -- /* Assert that the EP descriptor is disabled. */ -- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); -- -- /* Set up and enable the EP descriptor. */ -- TxCtrlEPList[epid].sub = virt_to_phys(sb_desc_setup); -- TxCtrlEPList[epid].hw_len = 0; -- TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -- -- /* We start the DMA sub channel without checking if it's running or not, because: -- 1) If it's already running, issuing the start command is a nop. -- 2) We avoid a test-and-set race condition. */ -- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); -- -- DBFEXIT; --} -- --static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status) --{ -- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- int epid = urb_priv->epid; -- -- DBFENTER; -- -- if (status) -- warn("Completing ctrl urb with status %d.", status); -- -- dbg_ctrl("Completing ctrl epid %d, urb 0x%lx", epid, (unsigned long)urb); -- -- /* Remove this urb from the list. */ -- urb_list_del(urb, epid); -- -- /* For an IN pipe, we always set the actual length, regardless of whether there was -- an error or not (which means the device driver can use the data if it wants to). */ -- if (usb_pipein(urb->pipe)) { -- urb->actual_length = urb_priv->rx_offset; -- } -- -- /* FIXME: Is there something of the things below we shouldn't do if there was an error? -- Like, maybe we shouldn't insert more traffic. */ -- -- /* Remember to free the SBs. */ -- etrax_remove_from_sb_list(urb); -- kfree(urb_priv); -- urb->hcpriv = 0; -- -- /* If there are any more urbs in the list we'd better start sending. */ -- if (!urb_list_empty(epid)) { -- struct urb *new_urb; -- -- /* Get the first urb. */ -- new_urb = urb_list_first(epid); -- assert(new_urb); -- -- dbg_ctrl("More ctrl for epid %d, first urb = 0x%lx", epid, (unsigned long)new_urb); -- -- etrax_usb_add_to_ctrl_sb_list(new_urb, epid); -- } -- -- urb->status = status; -- -- /* We let any non-zero status from the layer above have precedence. */ -- if (status == 0) { -- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) -- is to be treated as an error. */ -- if (urb->transfer_flags & URB_SHORT_NOT_OK) { -- if (usb_pipein(urb->pipe) && -- (urb->actual_length != -- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { -- urb->status = -EREMOTEIO; -- } -- } -- } -- -- if (urb->complete) { -- urb->complete(urb, NULL); -- } -- -- if (urb_list_empty(epid)) { -- /* No more traffic. Time to clean up. */ -- etrax_usb_free_epid(epid); -- /* Must set sub pointer to 0. */ -- dbg_ctrl("No ctrl for epid %d", epid); -- TxCtrlEPList[epid].sub = 0; -- } -- -- DBFEXIT; --} -- --static int etrax_usb_submit_intr_urb(struct urb *urb) --{ -- -- int epid; -- -- DBFENTER; -- -- if (usb_pipeout(urb->pipe)) { -- /* Unsupported transfer type. -- We don't support interrupt out traffic. (If we do, we can't support -- intervals for neither in or out traffic, but are forced to schedule all -- interrupt traffic in one frame.) */ -- return -EINVAL; -- } -- -- epid = etrax_usb_setup_epid(urb); -- if (epid == -1) { -- DBFEXIT; -- return -ENOMEM; -- } -- -- if (!urb_list_empty(epid)) { -- /* There is already a queued urb for this endpoint. */ -- etrax_usb_free_epid(epid); -- return -ENXIO; -- } -- -- urb->status = -EINPROGRESS; -- -- dbg_intr("Add intr urb 0x%lx, to list, epid %d", (unsigned long)urb, epid); -- -- urb_list_add(urb, epid); -- etrax_usb_add_to_intr_sb_list(urb, epid); -- -- return 0; -- -- DBFEXIT; --} -- --static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid) --{ -- -- volatile USB_EP_Desc_t *tmp_ep; -- volatile USB_EP_Desc_t *first_ep; -- -- char maxlen; -- int interval; -- int i; -- -- etrax_urb_priv_t *urb_priv; -- -- DBFENTER; -- -- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -- interval = urb->interval; -- -- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); -- assert(urb_priv != NULL); -- urb->hcpriv = urb_priv; -- -- first_ep = &TxIntrEPList[0]; -- -- /* Round of the interval to 2^n, it is obvious that this code favours -- smaller numbers, but that is actually a good thing */ -- /* FIXME: The "rounding error" for larger intervals will be quite -- large. For in traffic this shouldn't be a problem since it will only -- mean that we "poll" more often. */ -- for (i = 0; interval; i++) { -- interval = interval >> 1; -- } -- interval = 1 << (i - 1); -- -- dbg_intr("Interval rounded to %d", interval); -- -- tmp_ep = first_ep; -- i = 0; -- do { -- if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { -- if ((i % interval) == 0) { -- /* Insert the traffic ep after tmp_ep */ -- USB_EP_Desc_t *ep_desc; -- USB_SB_Desc_t *sb_desc; -- -- dbg_intr("Inserting EP for epid %d", epid); -- -- ep_desc = (USB_EP_Desc_t *) -- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); -- sb_desc = (USB_SB_Desc_t *) -- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); -- assert(ep_desc != NULL); -- CHECK_ALIGN(ep_desc); -- assert(sb_desc != NULL); -- -- ep_desc->sub = virt_to_phys(sb_desc); -- ep_desc->hw_len = 0; -- ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | -- IO_STATE(USB_EP_command, enable, yes)); -- -- -- /* Round upwards the number of packets of size maxlen -- that this SB descriptor should receive. */ -- sb_desc->sw_len = urb->transfer_buffer_length ? -- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; -- sb_desc->next = 0; -- sb_desc->buf = 0; -- sb_desc->command = -- (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) | -- IO_STATE(USB_SB_command, tt, in) | -- IO_STATE(USB_SB_command, eot, yes) | -- IO_STATE(USB_SB_command, eol, yes)); -- -- ep_desc->next = tmp_ep->next; -- tmp_ep->next = virt_to_phys(ep_desc); -- } -- i++; -- } -- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); -- } while (tmp_ep != first_ep); -- -- -- /* Note that first_sb/last_sb doesn't apply to interrupt traffic. */ -- urb_priv->epid = epid; -- -- /* We start the DMA sub channel without checking if it's running or not, because: -- 1) If it's already running, issuing the start command is a nop. -- 2) We avoid a test-and-set race condition. */ -- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); -- -- DBFEXIT; --} -- -- -- --static void etrax_usb_complete_intr_urb(struct urb *urb, int status) --{ -- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- int epid = urb_priv->epid; -- -- DBFENTER; -- -- if (status) -- warn("Completing intr urb with status %d.", status); -- -- dbg_intr("Completing intr epid %d, urb 0x%lx", epid, (unsigned long)urb); -- -- urb->status = status; -- urb->actual_length = urb_priv->rx_offset; -- -- dbg_intr("interrupt urb->actual_length = %d", urb->actual_length); -- -- /* We let any non-zero status from the layer above have precedence. */ -- if (status == 0) { -- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) -- is to be treated as an error. */ -- if (urb->transfer_flags & URB_SHORT_NOT_OK) { -- if (urb->actual_length != -- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { -- urb->status = -EREMOTEIO; -- } -- } -- } -- -- /* The driver will resubmit the URB so we need to remove it first */ -- etrax_usb_unlink_urb(urb, 0); -- if (urb->complete) { -- urb->complete(urb, NULL); -- } -- -- DBFEXIT; --} -- -- --static int etrax_usb_submit_isoc_urb(struct urb *urb) --{ -- int epid; -- unsigned long flags; -- -- DBFENTER; -- -- dbg_isoc("Submitting isoc urb = 0x%lx", (unsigned long)urb); -- -- /* Epid allocation, empty check and list add must be protected. -- Read about this in etrax_usb_submit_ctrl_urb. */ -- -- spin_lock_irqsave(&urb_list_lock, flags); -- /* Is there an active epid for this urb ? */ -- epid = etrax_usb_setup_epid(urb); -- if (epid == -1) { -- DBFEXIT; -- spin_unlock_irqrestore(&urb_list_lock, flags); -- return -ENOMEM; -- } -- -- /* Ok, now we got valid endpoint, lets insert some traffic */ -- -- urb->status = -EINPROGRESS; -- -- /* Find the last urb in the URB_List and add this urb after that one. -- Also add the traffic, that is do an etrax_usb_add_to_isoc_sb_list. This -- is important to make this in "real time" since isochronous traffic is -- time sensitive. */ -- -- dbg_isoc("Adding isoc urb to (possibly empty) list"); -- urb_list_add(urb, epid); -- etrax_usb_add_to_isoc_sb_list(urb, epid); -- spin_unlock_irqrestore(&urb_list_lock, flags); -- -- DBFEXIT; -- -- return 0; --} -- --static void etrax_usb_check_error_isoc_ep(const int epid) --{ -- unsigned long int flags; -- int error_code; -- __u32 r_usb_ept_data; -- -- /* We can't read R_USB_EPID_ATTN here since it would clear the iso_eof, -- bulk_eot and epid_attn interrupts. So we just check the status of -- the epid without testing if for it in R_USB_EPID_ATTN. */ -- -- -- save_flags(flags); -- cli(); -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO -- registers, they are located at the same address and are of the same size. -- In other words, this read should be ok for isoc also. */ -- r_usb_ept_data = *R_USB_EPT_DATA; -- restore_flags(flags); -- -- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); -- -- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { -- warn("Hold was set for epid %d.", epid); -- return; -- } -- -- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, no_error)) { -- -- /* This indicates that the SB list of the ept was completed before -- new data was appended to it. This is not an error, but indicates -- large system or USB load and could possibly cause trouble for -- very timing sensitive USB device drivers so we log it. -- */ -- info("Isoc. epid %d disabled with no error", epid); -- return; -- -- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, stall)) { -- /* Not really a protocol error, just says that the endpoint gave -- a stall response. Note that error_code cannot be stall for isoc. */ -- panic("Isoc traffic cannot stall"); -- -- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, bus_error)) { -- /* Two devices responded to a transaction request. Must be resolved -- by software. FIXME: Reset ports? */ -- panic("Bus error for epid %d." -- " Two devices responded to transaction request", -- epid); -- -- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { -- /* DMA overrun or underrun. */ -- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); -- -- /* It seems that error_code = buffer_error in -- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS -- are the same error. */ -- } --} -- -- --static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid) --{ -- -- int i = 0; -- -- etrax_urb_priv_t *urb_priv; -- USB_SB_Desc_t *prev_sb_desc, *next_sb_desc, *temp_sb_desc; -- -- DBFENTER; -- -- prev_sb_desc = next_sb_desc = temp_sb_desc = NULL; -- -- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC); -- assert(urb_priv != NULL); -- -- urb->hcpriv = urb_priv; -- urb_priv->epid = epid; -- -- if (usb_pipeout(urb->pipe)) { -- -- if (urb->number_of_packets == 0) panic("etrax_usb_add_to_isoc_sb_list 0 packets\n"); -- -- dbg_isoc("Transfer for epid %d is OUT", epid); -- dbg_isoc("%d packets in URB", urb->number_of_packets); -- -- /* Create one SB descriptor for each packet and link them together. */ -- for (i = 0; i < urb->number_of_packets; i++) { -- if (!urb->iso_frame_desc[i].length) -- continue; -- -- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC); -- assert(next_sb_desc != NULL); -- -- if (urb->iso_frame_desc[i].length > 0) { -- -- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, out) | -- IO_STATE(USB_SB_command, eot, yes)); -- -- next_sb_desc->sw_len = urb->iso_frame_desc[i].length; -- next_sb_desc->buf = virt_to_phys((char*)urb->transfer_buffer + urb->iso_frame_desc[i].offset); -- -- /* Check if full length transfer. */ -- if (urb->iso_frame_desc[i].length == -- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { -- next_sb_desc->command |= IO_STATE(USB_SB_command, full, yes); -- } -- } else { -- dbg_isoc("zero len packet"); -- next_sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | -- IO_STATE(USB_SB_command, tt, zout) | -- IO_STATE(USB_SB_command, eot, yes) | -- IO_STATE(USB_SB_command, full, yes)); -- -- next_sb_desc->sw_len = 1; -- next_sb_desc->buf = virt_to_phys(&zout_buffer[0]); -- } -- -- /* First SB descriptor that belongs to this urb */ -- if (i == 0) -- urb_priv->first_sb = next_sb_desc; -- else -- prev_sb_desc->next = virt_to_phys(next_sb_desc); -- -- prev_sb_desc = next_sb_desc; -- } -- -- next_sb_desc->command |= (IO_STATE(USB_SB_command, intr, yes) | -- IO_STATE(USB_SB_command, eol, yes)); -- next_sb_desc->next = 0; -- urb_priv->last_sb = next_sb_desc; -- -- } else if (usb_pipein(urb->pipe)) { -- -- dbg_isoc("Transfer for epid %d is IN", epid); -- dbg_isoc("transfer_buffer_length = %d", urb->transfer_buffer_length); -- dbg_isoc("rem is calculated to %d", urb->iso_frame_desc[urb->number_of_packets - 1].length); -- -- /* Note that in descriptors for periodic traffic are not consumed. This means that -- the USB controller never propagates in the SB list. In other words, if there already -- is an SB descriptor in the list for this EP we don't have to do anything. */ -- if (TxIsocEPList[epid].sub == 0) { -- dbg_isoc("Isoc traffic not already running, allocating SB"); -- -- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC); -- assert(next_sb_desc != NULL); -- -- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) | -- IO_STATE(USB_SB_command, eot, yes) | -- IO_STATE(USB_SB_command, eol, yes)); -- -- next_sb_desc->next = 0; -- next_sb_desc->sw_len = 1; /* Actual number of packets is not relevant -- for periodic in traffic as long as it is more -- than zero. Set to 1 always. */ -- next_sb_desc->buf = 0; -- -- /* The rem field is don't care for isoc traffic, so we don't set it. */ -- -- /* Only one SB descriptor that belongs to this urb. */ -- urb_priv->first_sb = next_sb_desc; -- urb_priv->last_sb = next_sb_desc; -- -- } else { -- -- dbg_isoc("Isoc traffic already running, just setting first/last_sb"); -- -- /* Each EP for isoc in will have only one SB descriptor, setup when submitting the -- already active urb. Note that even though we may have several first_sb/last_sb -- pointing at the same SB descriptor, they are freed only once (when the list has -- become empty). */ -- urb_priv->first_sb = phys_to_virt(TxIsocEPList[epid].sub); -- urb_priv->last_sb = phys_to_virt(TxIsocEPList[epid].sub); -- return; -- } -- -- } -- -- /* Find the spot to insert this urb and add it. */ -- if (TxIsocEPList[epid].sub == 0) { -- /* First SB descriptor inserted in this list (in or out). */ -- dbg_isoc("Inserting SB desc first in list"); -- TxIsocEPList[epid].hw_len = 0; -- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -- -- } else { -- /* Isochronous traffic is already running, insert new traffic last (only out). */ -- dbg_isoc("Inserting SB desc last in list"); -- temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); -- while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != -- IO_STATE(USB_SB_command, eol, yes)) { -- assert(temp_sb_desc->next); -- temp_sb_desc = phys_to_virt(temp_sb_desc->next); -- } -- dbg_isoc("Appending list on desc 0x%p", temp_sb_desc); -- -- /* Next pointer must be set before eol is removed. */ -- temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); -- /* Clear the previous end of list flag since there is a new in the -- added SB descriptor list. */ -- temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); -- -- if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { -- /* 8.8.5 in Designer's Reference says we should check for and correct -- any errors in the EP here. That should not be necessary if epid_attn -- is handled correctly, so we assume all is ok. */ -- dbg_isoc("EP disabled"); -- etrax_usb_check_error_isoc_ep(epid); -- -- /* The SB list was exhausted. */ -- if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { -- /* The new sublist did not get processed before the EP was -- disabled. Setup the EP again. */ -- dbg_isoc("Set EP sub to new list"); -- TxIsocEPList[epid].hw_len = 0; -- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -- } -- } -- } -- -- if (urb->transfer_flags & URB_ISO_ASAP) { -- /* The isoc transfer should be started as soon as possible. The start_frame -- field is a return value if URB_ISO_ASAP was set. Comparing R_USB_FM_NUMBER -- with a USB Chief trace shows that the first isoc IN token is sent 2 frames -- later. I'm not sure how this affects usage of the start_frame field by the -- device driver, or how it affects things when USB_ISO_ASAP is not set, so -- therefore there's no compensation for the 2 frame "lag" here. */ -- urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); -- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -- urb_priv->urb_state = STARTED; -- dbg_isoc("URB_ISO_ASAP set, urb->start_frame set to %d", urb->start_frame); -- } else { -- /* Not started yet. */ -- urb_priv->urb_state = NOT_STARTED; -- dbg_isoc("urb_priv->urb_state set to NOT_STARTED"); -- } -- -- /* We start the DMA sub channel without checking if it's running or not, because: -- 1) If it's already running, issuing the start command is a nop. -- 2) We avoid a test-and-set race condition. */ -- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); -- -- DBFEXIT; --} -- --static void etrax_usb_complete_isoc_urb(struct urb *urb, int status) --{ -- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- int epid = urb_priv->epid; -- int auto_resubmit = 0; -- -- DBFENTER; -- dbg_isoc("complete urb 0x%p, status %d", urb, status); -- -- if (status) -- warn("Completing isoc urb with status %d.", status); -- -- if (usb_pipein(urb->pipe)) { -- int i; -- -- /* Make that all isoc packets have status and length set before -- completing the urb. */ -- for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++) { -- urb->iso_frame_desc[i].actual_length = 0; -- urb->iso_frame_desc[i].status = -EPROTO; -- } -- -- urb_list_del(urb, epid); -- -- if (!list_empty(&urb_list[epid])) { -- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; -- } else { -- unsigned long int flags; -- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -- /* The EP was enabled, disable it and wait. */ -- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -- -- /* Ah, the luxury of busy-wait. */ -- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); -- } -- -- etrax_remove_from_sb_list(urb); -- TxIsocEPList[epid].sub = 0; -- TxIsocEPList[epid].hw_len = 0; -- -- save_flags(flags); -- cli(); -- etrax_usb_free_epid(epid); -- restore_flags(flags); -- } -- -- urb->hcpriv = 0; -- kfree(urb_priv); -- -- /* Release allocated bandwidth. */ -- usb_release_bandwidth(urb->dev, urb, 0); -- } else if (usb_pipeout(urb->pipe)) { -- int freed_descr; -- -- dbg_isoc("Isoc out urb complete 0x%p", urb); -- -- /* Update the urb list. */ -- urb_list_del(urb, epid); -- -- freed_descr = etrax_remove_from_sb_list(urb); -- dbg_isoc("freed %d descriptors of %d packets", freed_descr, urb->number_of_packets); -- assert(freed_descr == urb->number_of_packets); -- urb->hcpriv = 0; -- kfree(urb_priv); -- -- /* Release allocated bandwidth. */ -- usb_release_bandwidth(urb->dev, urb, 0); -- } -- -- urb->status = status; -- if (urb->complete) { -- urb->complete(urb, NULL); -- } -- -- if (auto_resubmit) { -- /* Check that urb was not unlinked by the complete callback. */ -- if (__urb_list_entry(urb, epid)) { -- /* Move this one down the list. */ -- urb_list_move_last(urb, epid); -- -- /* Mark the now first urb as started (may already be). */ -- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; -- -- /* Must set this to 0 since this urb is still active after -- completion. */ -- urb_priv->isoc_packet_counter = 0; -- } else { -- warn("(ISOC) automatic resubmit urb 0x%p removed by complete.", urb); -- } -- } -- -- DBFEXIT; --} -- --static void etrax_usb_complete_urb(struct urb *urb, int status) --{ -- switch (usb_pipetype(urb->pipe)) { -- case PIPE_BULK: -- etrax_usb_complete_bulk_urb(urb, status); -- break; -- case PIPE_CONTROL: -- etrax_usb_complete_ctrl_urb(urb, status); -- break; -- case PIPE_INTERRUPT: -- etrax_usb_complete_intr_urb(urb, status); -- break; -- case PIPE_ISOCHRONOUS: -- etrax_usb_complete_isoc_urb(urb, status); -- break; -- default: -- err("Unknown pipetype"); -- } --} -- -- -- --static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc) --{ -- usb_interrupt_registers_t *reg; -- unsigned long flags; -- __u32 irq_mask; -- __u8 status; -- __u32 epid_attn; -- __u16 port_status_1; -- __u16 port_status_2; -- __u32 fm_number; -- -- DBFENTER; -- -- /* Read critical registers into local variables, do kmalloc afterwards. */ -- save_flags(flags); -- cli(); -- -- irq_mask = *R_USB_IRQ_MASK_READ; -- /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that R_USB_STATUS -- must be read before R_USB_EPID_ATTN since reading the latter clears the -- ourun and perror fields of R_USB_STATUS. */ -- status = *R_USB_STATUS; -- -- /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn interrupts. */ -- epid_attn = *R_USB_EPID_ATTN; -- -- /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the -- port_status interrupt. */ -- port_status_1 = *R_USB_RH_PORT_STATUS_1; -- port_status_2 = *R_USB_RH_PORT_STATUS_2; -- -- /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ -- /* Note: the lower 11 bits contain the actual frame number, sent with each sof. */ -- fm_number = *R_USB_FM_NUMBER; -- -- restore_flags(flags); -- -- reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, SLAB_ATOMIC); -- -- assert(reg != NULL); -- -- reg->hc = (etrax_hc_t *)vhc; -- -- /* Now put register values into kmalloc'd area. */ -- reg->r_usb_irq_mask_read = irq_mask; -- reg->r_usb_status = status; -- reg->r_usb_epid_attn = epid_attn; -- reg->r_usb_rh_port_status_1 = port_status_1; -- reg->r_usb_rh_port_status_2 = port_status_2; -- reg->r_usb_fm_number = fm_number; -- -- INIT_WORK(®->usb_bh, etrax_usb_hc_interrupt_bottom_half, reg); -- schedule_work(®->usb_bh); -- -- DBFEXIT; -- -- return IRQ_HANDLED; --} -- --static void etrax_usb_hc_interrupt_bottom_half(void *data) --{ -- usb_interrupt_registers_t *reg = (usb_interrupt_registers_t *)data; -- __u32 irq_mask = reg->r_usb_irq_mask_read; -- -- DBFENTER; -- -- /* Interrupts are handled in order of priority. */ -- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { -- etrax_usb_hc_epid_attn_interrupt(reg); -- } -- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { -- etrax_usb_hc_port_status_interrupt(reg); -- } -- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { -- etrax_usb_hc_ctl_status_interrupt(reg); -- } -- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { -- etrax_usb_hc_isoc_eof_interrupt(); -- } -- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { -- /* Update/restart the bulk start timer since obviously the channel is running. */ -- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); -- /* Update/restart the bulk eot timer since we just received an bulk eot interrupt. */ -- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -- -- etrax_usb_hc_bulk_eot_interrupt(0); -- } -- -- kmem_cache_free(top_half_reg_cache, reg); -- -- DBFEXIT; --} -- -- --void etrax_usb_hc_isoc_eof_interrupt(void) --{ -- struct urb *urb; -- etrax_urb_priv_t *urb_priv; -- int epid; -- unsigned long flags; -- -- DBFENTER; -- -- /* Do not check the invalid epid (it has a valid sub pointer). */ -- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -- -- /* Do not check the invalid epid (it has a valid sub pointer). */ -- if ((epid == DUMMY_EPID) || (epid == INVALID_EPID)) -- continue; -- -- /* Disable interrupts to block the isoc out descriptor interrupt handler -- from being called while the isoc EPID list is being checked. -- */ -- save_flags(flags); -- cli(); -- -- if (TxIsocEPList[epid].sub == 0) { -- /* Nothing here to see. */ -- restore_flags(flags); -- continue; -- } -- -- /* Get the first urb (if any). */ -- urb = urb_list_first(epid); -- if (urb == 0) { -- warn("Ignoring NULL urb"); -- restore_flags(flags); -- continue; -- } -- if (usb_pipein(urb->pipe)) { -- -- /* Sanity check. */ -- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -- -- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- assert(urb_priv); -- -- if (urb_priv->urb_state == NOT_STARTED) { -- -- /* If ASAP is not set and urb->start_frame is the current frame, -- start the transfer. */ -- if (!(urb->transfer_flags & URB_ISO_ASAP) && -- (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { -- -- dbg_isoc("Enabling isoc IN EP descr for epid %d", epid); -- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -- -- /* This urb is now active. */ -- urb_priv->urb_state = STARTED; -- continue; -- } -- } -- } -- restore_flags(flags); -- } -- -- DBFEXIT; -- --} -- --void etrax_usb_hc_bulk_eot_interrupt(int timer_induced) --{ -- int epid; -- -- /* The technique is to run one urb at a time, wait for the eot interrupt at which -- point the EP descriptor has been disabled. */ -- -- DBFENTER; -- dbg_bulk("bulk eot%s", timer_induced ? ", called by timer" : ""); -- -- for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -- -- if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && -- (TxBulkEPList[epid].sub != 0)) { -- -- struct urb *urb; -- etrax_urb_priv_t *urb_priv; -- unsigned long flags; -- __u32 r_usb_ept_data; -- -- /* Found a disabled EP descriptor which has a non-null sub pointer. -- Verify that this ctrl EP descriptor got disabled no errors. -- FIXME: Necessary to check error_code? */ -- dbg_bulk("for epid %d?", epid); -- -- /* Get the first urb. */ -- urb = urb_list_first(epid); -- -- /* FIXME: Could this happen for valid reasons? Why did it disappear? Because of -- wrong unlinking? */ -- if (!urb) { -- warn("NULL urb for epid %d", epid); -- continue; -- } -- -- assert(urb); -- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; -- assert(urb_priv); -- -- /* Sanity checks. */ -- assert(usb_pipetype(urb->pipe) == PIPE_BULK); -- if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { -- err("bulk endpoint got disabled before reaching last sb"); -- } -- -- /* For bulk IN traffic, there seems to be a race condition between -- between the bulk eot and eop interrupts, or rather an uncertainty regarding -- the order in which they happen. Normally we expect the eop interrupt from -- DMA channel 9 to happen before the eot interrupt. -- -- Therefore, we complete the bulk IN urb in the rx interrupt handler instead. */ -- -- if (usb_pipein(urb->pipe)) { -- dbg_bulk("in urb, continuing"); -- continue; -- } -- -- save_flags(flags); -- cli(); -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- r_usb_ept_data = *R_USB_EPT_DATA; -- restore_flags(flags); -- -- if (IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data) == -- IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -- /* This means that the endpoint has no error, is disabled -- and had inserted traffic, i.e. transfer successfully completed. */ -- etrax_usb_complete_bulk_urb(urb, 0); -- } else { -- /* Shouldn't happen. We expect errors to be caught by epid attention. */ -- err("Found disabled bulk EP desc, error_code != no_error"); -- } -- } -- } -- -- /* Normally, we should find (at least) one disabled EP descriptor with a valid sub pointer. -- However, because of the uncertainty in the deliverance of the eop/eot interrupts, we may -- not. Also, we might find two disabled EPs when handling an eot interrupt, and then find -- none the next time. */ -- -- DBFEXIT; -- --} -- --void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg) --{ -- /* This function handles the epid attention interrupt. There are a variety of reasons -- for this interrupt to happen (Designer's Reference, p. 8 - 22 for the details): -- -- invalid ep_id - Invalid epid in an EP (EP disabled). -- stall - Not strictly an error condition (EP disabled). -- 3rd error - Three successive transaction errors (EP disabled). -- buffer ourun - Buffer overrun or underrun (EP disabled). -- past eof1 - Intr or isoc transaction proceeds past EOF1. -- near eof - Intr or isoc transaction would not fit inside the frame. -- zout transfer - If zout transfer for a bulk endpoint (EP disabled). -- setup transfer - If setup transfer for a non-ctrl endpoint (EP disabled). */ -- -- int epid; -- -- -- DBFENTER; -- -- assert(reg != NULL); -- -- /* Note that we loop through all epids. We still want to catch errors for -- the invalid one, even though we might handle them differently. */ -- for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -- -- if (test_bit(epid, (void *)®->r_usb_epid_attn)) { -- -- struct urb *urb; -- __u32 r_usb_ept_data; -- unsigned long flags; -- int error_code; -- -- save_flags(flags); -- cli(); -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -- nop(); -- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO -- registers, they are located at the same address and are of the same size. -- In other words, this read should be ok for isoc also. */ -- r_usb_ept_data = *R_USB_EPT_DATA; -- restore_flags(flags); -- -- /* First some sanity checks. */ -- if (epid == INVALID_EPID) { -- /* FIXME: What if it became disabled? Could seriously hurt interrupt -- traffic. (Use do_intr_recover.) */ -- warn("Got epid_attn for INVALID_EPID (%d).", epid); -- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); -- err("R_USB_STATUS = 0x%x", reg->r_usb_status); -- continue; -- } else if (epid == DUMMY_EPID) { -- /* We definitely don't care about these ones. Besides, they are -- always disabled, so any possible disabling caused by the -- epid attention interrupt is irrelevant. */ -- warn("Got epid_attn for DUMMY_EPID (%d).", epid); -- continue; -- } -- -- /* Get the first urb in the urb list for this epid. We blatantly assume -- that only the first urb could have caused the epid attention. -- (For bulk and ctrl, only one urb is active at any one time. For intr -- and isoc we remove them once they are completed.) */ -- urb = urb_list_first(epid); -- -- if (urb == NULL) { -- err("Got epid_attn for epid %i with no urb.", epid); -- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); -- err("R_USB_STATUS = 0x%x", reg->r_usb_status); -- continue; -- } -- -- switch (usb_pipetype(urb->pipe)) { -- case PIPE_BULK: -- warn("Got epid attn for bulk endpoint, epid %d", epid); -- break; -- case PIPE_CONTROL: -- warn("Got epid attn for control endpoint, epid %d", epid); -- break; -- case PIPE_INTERRUPT: -- warn("Got epid attn for interrupt endpoint, epid %d", epid); -- break; -- case PIPE_ISOCHRONOUS: -- warn("Got epid attn for isochronous endpoint, epid %d", epid); -- break; -- } -- -- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { -- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { -- warn("Hold was set for epid %d.", epid); -- continue; -- } -- } -- -- /* Even though error_code occupies bits 22 - 23 in both R_USB_EPT_DATA and -- R_USB_EPT_DATA_ISOC, we separate them here so we don't forget in other places. */ -- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); -- } else { -- error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data); -- } -- -- /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ -- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -- -- /* Isoc traffic doesn't have error_count_in/error_count_out. */ -- if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && -- (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, r_usb_ept_data) == 3 || -- IO_EXTRACT(R_USB_EPT_DATA, error_count_out, r_usb_ept_data) == 3)) { -- /* 3rd error. */ -- warn("3rd error for epid %i", epid); -- etrax_usb_complete_urb(urb, -EPROTO); -- -- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { -- -- warn("Perror for epid %d", epid); -- -- if (!(r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { -- /* invalid ep_id */ -- panic("Perror because of invalid epid." -- " Deconfigured too early?"); -- } else { -- /* past eof1, near eof, zout transfer, setup transfer */ -- -- /* Dump the urb and the relevant EP descriptor list. */ -- -- __dump_urb(urb); -- __dump_ept_data(epid); -- __dump_ep_list(usb_pipetype(urb->pipe)); -- -- panic("Something wrong with DMA descriptor contents." -- " Too much traffic inserted?"); -- } -- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { -- /* buffer ourun */ -- panic("Buffer overrun/underrun for epid %d. DMA too busy?", epid); -- } -- -- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, stall)) { -- /* Not really a protocol error, just says that the endpoint gave -- a stall response. Note that error_code cannot be stall for isoc. */ -- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -- panic("Isoc traffic cannot stall"); -- } -- -- warn("Stall for epid %d", epid); -- etrax_usb_complete_urb(urb, -EPIPE); -- -- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, bus_error)) { -- /* Two devices responded to a transaction request. Must be resolved -- by software. FIXME: Reset ports? */ -- panic("Bus error for epid %d." -- " Two devices responded to transaction request", -- epid); -- -- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { -- /* DMA overrun or underrun. */ -- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); -- -- /* It seems that error_code = buffer_error in -- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS -- are the same error. */ -- etrax_usb_complete_urb(urb, -EPROTO); -- } -- } -- } -- -- DBFEXIT; -- --} -- --void etrax_usb_bulk_start_timer_func(unsigned long dummy) --{ -- -- /* We might enable an EP descriptor behind the current DMA position when it's about -- to decide that there are no more bulk traffic and it should stop the bulk channel. -- Therefore we periodically check if the bulk channel is stopped and there is an -- enabled bulk EP descriptor, in which case we start the bulk channel. */ -- dbg_bulk("bulk_start_timer timed out."); -- -- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { -- int epid; -- -- dbg_bulk("Bulk DMA channel not running."); -- -- for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -- dbg_bulk("Found enabled EP for epid %d, starting bulk channel.\n", -- epid); -- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); -- -- /* Restart the bulk eot timer since we just started the bulk channel. */ -- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -- -- /* No need to search any further. */ -- break; -- } -- } -- } else { -- dbg_bulk("Bulk DMA channel running."); -- } --} -- --void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg) --{ -- etrax_hc_t *hc = reg->hc; -- __u16 r_usb_rh_port_status_1 = reg->r_usb_rh_port_status_1; -- __u16 r_usb_rh_port_status_2 = reg->r_usb_rh_port_status_2; -- -- DBFENTER; -- -- /* The Etrax RH does not include a wPortChange register, so this has to be handled in software -- (by saving the old port status value for comparison when the port status interrupt happens). -- See section 11.16.2.6.2 in the USB 1.1 spec for details. */ -- -- dbg_rh("hc->rh.prev_wPortStatus_1 = 0x%x", hc->rh.prev_wPortStatus_1); -- dbg_rh("hc->rh.prev_wPortStatus_2 = 0x%x", hc->rh.prev_wPortStatus_2); -- dbg_rh("r_usb_rh_port_status_1 = 0x%x", r_usb_rh_port_status_1); -- dbg_rh("r_usb_rh_port_status_2 = 0x%x", r_usb_rh_port_status_2); -- -- /* C_PORT_CONNECTION is set on any transition. */ -- hc->rh.wPortChange_1 |= -- ((r_usb_rh_port_status_1 & (1 << RH_PORT_CONNECTION)) != -- (hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_CONNECTION))) ? -- (1 << RH_PORT_CONNECTION) : 0; -- -- hc->rh.wPortChange_2 |= -- ((r_usb_rh_port_status_2 & (1 << RH_PORT_CONNECTION)) != -- (hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_CONNECTION))) ? -- (1 << RH_PORT_CONNECTION) : 0; -- -- /* C_PORT_ENABLE is _only_ set on a one to zero transition, i.e. when -- the port is disabled, not when it's enabled. */ -- hc->rh.wPortChange_1 |= -- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_ENABLE)) -- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_ENABLE))) ? -- (1 << RH_PORT_ENABLE) : 0; -- -- hc->rh.wPortChange_2 |= -- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_ENABLE)) -- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_ENABLE))) ? -- (1 << RH_PORT_ENABLE) : 0; -- -- /* C_PORT_SUSPEND is set to one when the device has transitioned out -- of the suspended state, i.e. when suspend goes from one to zero. */ -- hc->rh.wPortChange_1 |= -- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_SUSPEND)) -- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_SUSPEND))) ? -- (1 << RH_PORT_SUSPEND) : 0; -- -- hc->rh.wPortChange_2 |= -- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_SUSPEND)) -- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_SUSPEND))) ? -- (1 << RH_PORT_SUSPEND) : 0; -- -- -- /* C_PORT_RESET is set when reset processing on this port is complete. */ -- hc->rh.wPortChange_1 |= -- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_RESET)) -- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_RESET))) ? -- (1 << RH_PORT_RESET) : 0; -- -- hc->rh.wPortChange_2 |= -- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_RESET)) -- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_RESET))) ? -- (1 << RH_PORT_RESET) : 0; -- -- /* Save the new values for next port status change. */ -- hc->rh.prev_wPortStatus_1 = r_usb_rh_port_status_1; -- hc->rh.prev_wPortStatus_2 = r_usb_rh_port_status_2; -- -- dbg_rh("hc->rh.wPortChange_1 set to 0x%x", hc->rh.wPortChange_1); -- dbg_rh("hc->rh.wPortChange_2 set to 0x%x", hc->rh.wPortChange_2); -- -- DBFEXIT; -- --} -- --void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg) --{ -- DBFENTER; -- -- /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB -- list for the corresponding epid? */ -- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { -- panic("USB controller got ourun."); -- } -- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { -- -- /* Before, etrax_usb_do_intr_recover was called on this epid if it was -- an interrupt pipe. I don't see how re-enabling all EP descriptors -- will help if there was a programming error. */ -- panic("USB controller got perror."); -- } -- -- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { -- /* We should never operate in device mode. */ -- panic("USB controller in device mode."); -- } -- -- /* These if-statements could probably be nested. */ -- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, host_mode)) { -- info("USB controller in host mode."); -- } -- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, started)) { -- info("USB controller started."); -- } -- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, running)) { -- info("USB controller running."); -- } -- -- DBFEXIT; -- --} -- -- --static int etrax_rh_submit_urb(struct urb *urb) --{ -- struct usb_device *usb_dev = urb->dev; -- etrax_hc_t *hc = usb_dev->bus->hcpriv; -- unsigned int pipe = urb->pipe; -- struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet; -- void *data = urb->transfer_buffer; -- int leni = urb->transfer_buffer_length; -- int len = 0; -- int stat = 0; -- -- __u16 bmRType_bReq; -- __u16 wValue; -- __u16 wIndex; -- __u16 wLength; -- -- DBFENTER; -- -- /* FIXME: What is this interrupt urb that is sent to the root hub? */ -- if (usb_pipetype (pipe) == PIPE_INTERRUPT) { -- dbg_rh("Root-Hub submit IRQ: every %d ms", urb->interval); -- hc->rh.urb = urb; -- hc->rh.send = 1; -- /* FIXME: We could probably remove this line since it's done -- in etrax_rh_init_int_timer. (Don't remove it from -- etrax_rh_init_int_timer though.) */ -- hc->rh.interval = urb->interval; -- etrax_rh_init_int_timer(urb); -- DBFEXIT; -- -- return 0; -- } -- -- bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8); -- wValue = le16_to_cpu(cmd->wValue); -- wIndex = le16_to_cpu(cmd->wIndex); -- wLength = le16_to_cpu(cmd->wLength); -- -- dbg_rh("bmRType_bReq : 0x%04x (%d)", bmRType_bReq, bmRType_bReq); -- dbg_rh("wValue : 0x%04x (%d)", wValue, wValue); -- dbg_rh("wIndex : 0x%04x (%d)", wIndex, wIndex); -- dbg_rh("wLength : 0x%04x (%d)", wLength, wLength); -- -- switch (bmRType_bReq) { -- -- /* Request Destination: -- without flags: Device, -- RH_INTERFACE: interface, -- RH_ENDPOINT: endpoint, -- RH_CLASS means HUB here, -- RH_OTHER | RH_CLASS almost ever means HUB_PORT here -- */ -- -- case RH_GET_STATUS: -- *(__u16 *) data = cpu_to_le16 (1); -- OK (2); -- -- case RH_GET_STATUS | RH_INTERFACE: -- *(__u16 *) data = cpu_to_le16 (0); -- OK (2); -- -- case RH_GET_STATUS | RH_ENDPOINT: -- *(__u16 *) data = cpu_to_le16 (0); -- OK (2); -- -- case RH_GET_STATUS | RH_CLASS: -- *(__u32 *) data = cpu_to_le32 (0); -- OK (4); /* hub power ** */ -- -- case RH_GET_STATUS | RH_OTHER | RH_CLASS: -- if (wIndex == 1) { -- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_1); -- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_1); -- } else if (wIndex == 2) { -- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_2); -- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_2); -- } else { -- dbg_rh("RH_GET_STATUS whith invalid wIndex!"); -- OK(0); -- } -- -- OK(4); -- -- case RH_CLEAR_FEATURE | RH_ENDPOINT: -- switch (wValue) { -- case (RH_ENDPOINT_STALL): -- OK (0); -- } -- break; -- -- case RH_CLEAR_FEATURE | RH_CLASS: -- switch (wValue) { -- case (RH_C_HUB_OVER_CURRENT): -- OK (0); /* hub power over current ** */ -- } -- break; -- -- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: -- switch (wValue) { -- case (RH_PORT_ENABLE): -- if (wIndex == 1) { -- -- dbg_rh("trying to do disable port 1"); -- -- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); -- -- while (hc->rh.prev_wPortStatus_1 & -- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)); -- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); -- dbg_rh("Port 1 is disabled"); -- -- } else if (wIndex == 2) { -- -- dbg_rh("trying to do disable port 2"); -- -- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); -- -- while (hc->rh.prev_wPortStatus_2 & -- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes)); -- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); -- dbg_rh("Port 2 is disabled"); -- -- } else { -- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_ENABLE " -- "with invalid wIndex == %d!", wIndex); -- } -- -- OK (0); -- case (RH_PORT_SUSPEND): -- /* Opposite to suspend should be resume, so we'll do a resume. */ -- /* FIXME: USB 1.1, 11.16.2.2 says: -- "Clearing the PORT_SUSPEND feature causes a host-initiated resume -- on the specified port. If the port is not in the Suspended state, -- the hub should treat this request as a functional no-operation." -- Shouldn't we check if the port is in a suspended state before -- resuming? */ -- -- /* Make sure the controller isn't busy. */ -- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); -- -- if (wIndex == 1) { -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, port1) | -- IO_STATE(R_USB_COMMAND, port_cmd, resume) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); -- } else if (wIndex == 2) { -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, port2) | -- IO_STATE(R_USB_COMMAND, port_cmd, resume) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); -- } else { -- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_SUSPEND " -- "with invalid wIndex == %d!", wIndex); -- } -- -- OK (0); -- case (RH_PORT_POWER): -- OK (0); /* port power ** */ -- case (RH_C_PORT_CONNECTION): -- if (wIndex == 1) { -- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_CONNECTION); -- } else if (wIndex == 2) { -- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_CONNECTION); -- } else { -- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_CONNECTION " -- "with invalid wIndex == %d!", wIndex); -- } -- -- OK (0); -- case (RH_C_PORT_ENABLE): -- if (wIndex == 1) { -- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_ENABLE); -- } else if (wIndex == 2) { -- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_ENABLE); -- } else { -- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_ENABLE " -- "with invalid wIndex == %d!", wIndex); -- } -- OK (0); -- case (RH_C_PORT_SUSPEND): --/*** WR_RH_PORTSTAT(RH_PS_PSSC); */ -- OK (0); -- case (RH_C_PORT_OVER_CURRENT): -- OK (0); /* port power over current ** */ -- case (RH_C_PORT_RESET): -- if (wIndex == 1) { -- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_RESET); -- } else if (wIndex == 2) { -- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_RESET); -- } else { -- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_RESET " -- "with invalid index == %d!", wIndex); -- } -- -- OK (0); -- -- } -- break; -- -- case RH_SET_FEATURE | RH_OTHER | RH_CLASS: -- switch (wValue) { -- case (RH_PORT_SUSPEND): -- -- /* Make sure the controller isn't busy. */ -- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); -- -- if (wIndex == 1) { -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, port1) | -- IO_STATE(R_USB_COMMAND, port_cmd, suspend) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); -- } else if (wIndex == 2) { -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, port2) | -- IO_STATE(R_USB_COMMAND, port_cmd, suspend) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); -- } else { -- dbg_rh("RH_SET_FEATURE->RH_PORT_SUSPEND " -- "with invalid wIndex == %d!", wIndex); -- } -- -- OK (0); -- case (RH_PORT_RESET): -- if (wIndex == 1) { -- -- port_1_reset: -- dbg_rh("Doing reset of port 1"); -- -- /* Make sure the controller isn't busy. */ -- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); -- -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, port1) | -- IO_STATE(R_USB_COMMAND, port_cmd, reset) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); -- -- /* We must wait at least 10 ms for the device to recover. -- 15 ms should be enough. */ -- udelay(15000); -- -- /* Wait for reset bit to go low (should be done by now). */ -- while (hc->rh.prev_wPortStatus_1 & -- IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)); -- -- /* If the port status is -- 1) connected and enabled then there is a device and everything is fine -- 2) neither connected nor enabled then there is no device, also fine -- 3) connected and not enabled then we try again -- (Yes, there are other port status combinations besides these.) */ -- -- if ((hc->rh.prev_wPortStatus_1 & -- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && -- (hc->rh.prev_wPortStatus_1 & -- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { -- dbg_rh("Connected device on port 1, but port not enabled?" -- " Trying reset again."); -- goto port_2_reset; -- } -- -- /* Diagnostic printouts. */ -- if ((hc->rh.prev_wPortStatus_1 & -- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, no)) && -- (hc->rh.prev_wPortStatus_1 & -- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { -- dbg_rh("No connected device on port 1"); -- } else if ((hc->rh.prev_wPortStatus_1 & -- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && -- (hc->rh.prev_wPortStatus_1 & -- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes))) { -- dbg_rh("Connected device on port 1, port 1 enabled"); -- } -- -- } else if (wIndex == 2) { -- -- port_2_reset: -- dbg_rh("Doing reset of port 2"); -- -- /* Make sure the controller isn't busy. */ -- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); -- -- /* Issue the reset command. */ -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, port2) | -- IO_STATE(R_USB_COMMAND, port_cmd, reset) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); -- -- /* We must wait at least 10 ms for the device to recover. -- 15 ms should be enough. */ -- udelay(15000); -- -- /* Wait for reset bit to go low (should be done by now). */ -- while (hc->rh.prev_wPortStatus_2 & -- IO_STATE(R_USB_RH_PORT_STATUS_2, reset, yes)); -- -- /* If the port status is -- 1) connected and enabled then there is a device and everything is fine -- 2) neither connected nor enabled then there is no device, also fine -- 3) connected and not enabled then we try again -- (Yes, there are other port status combinations besides these.) */ -- -- if ((hc->rh.prev_wPortStatus_2 & -- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && -- (hc->rh.prev_wPortStatus_2 & -- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { -- dbg_rh("Connected device on port 2, but port not enabled?" -- " Trying reset again."); -- goto port_2_reset; -- } -- -- /* Diagnostic printouts. */ -- if ((hc->rh.prev_wPortStatus_2 & -- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, no)) && -- (hc->rh.prev_wPortStatus_2 & -- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { -- dbg_rh("No connected device on port 2"); -- } else if ((hc->rh.prev_wPortStatus_2 & -- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && -- (hc->rh.prev_wPortStatus_2 & -- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes))) { -- dbg_rh("Connected device on port 2, port 2 enabled"); -- } -- -- } else { -- dbg_rh("RH_SET_FEATURE->RH_PORT_RESET with invalid wIndex = %d", wIndex); -- } -- -- /* Make sure the controller isn't busy. */ -- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); -- -- /* If all enabled ports were disabled the host controller goes down into -- started mode, so we need to bring it back into the running state. -- (This is safe even if it's already in the running state.) */ -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, nop) | -- IO_STATE(R_USB_COMMAND, port_cmd, reset) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -- -- dbg_rh("...Done"); -- OK(0); -- -- case (RH_PORT_POWER): -- OK (0); /* port power ** */ -- case (RH_PORT_ENABLE): -- /* There is no port enable command in the host controller, so if the -- port is already enabled, we do nothing. If not, we reset the port -- (with an ugly goto). */ -- -- if (wIndex == 1) { -- if (hc->rh.prev_wPortStatus_1 & -- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no)) { -- goto port_1_reset; -- } -- } else if (wIndex == 2) { -- if (hc->rh.prev_wPortStatus_2 & -- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no)) { -- goto port_2_reset; -- } -- } else { -- dbg_rh("RH_SET_FEATURE->RH_GET_STATUS with invalid wIndex = %d", wIndex); -- } -- OK (0); -- } -- break; -- -- case RH_SET_ADDRESS: -- hc->rh.devnum = wValue; -- dbg_rh("RH address set to: %d", hc->rh.devnum); -- OK (0); -- -- case RH_GET_DESCRIPTOR: -- switch ((wValue & 0xff00) >> 8) { -- case (0x01): /* device descriptor */ -- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_dev_des), wLength)); -- memcpy (data, root_hub_dev_des, len); -- OK (len); -- case (0x02): /* configuration descriptor */ -- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_config_des), wLength)); -- memcpy (data, root_hub_config_des, len); -- OK (len); -- case (0x03): /* string descriptors */ -- len = usb_root_hub_string (wValue & 0xff, -- 0xff, "ETRAX 100LX", -- data, wLength); -- if (len > 0) { -- OK(min(leni, len)); -- } else { -- stat = -EPIPE; -- } -- -- } -- break; -- -- case RH_GET_DESCRIPTOR | RH_CLASS: -- root_hub_hub_des[2] = hc->rh.numports; -- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_hub_des), wLength)); -- memcpy (data, root_hub_hub_des, len); -- OK (len); -- -- case RH_GET_CONFIGURATION: -- *(__u8 *) data = 0x01; -- OK (1); -- -- case RH_SET_CONFIGURATION: -- OK (0); -- -- default: -- stat = -EPIPE; -- } -- -- urb->actual_length = len; -- urb->status = stat; -- urb->dev = NULL; -- if (urb->complete) { -- urb->complete(urb, NULL); -- } -- DBFEXIT; -- -- return 0; --} -- --static void --etrax_usb_bulk_eot_timer_func(unsigned long dummy) --{ -- /* Because of a race condition in the top half, we might miss a bulk eot. -- This timer "simulates" a bulk eot if we don't get one for a while, hopefully -- correcting the situation. */ -- dbg_bulk("bulk_eot_timer timed out."); -- etrax_usb_hc_bulk_eot_interrupt(1); --} -- --static void* --etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, -- unsigned mem_flags, dma_addr_t *dma) --{ -- return kmalloc(size, mem_flags); --} -- --static void --etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma) --{ -- kfree(addr); --} -- -- --static struct device fake_device; -- --static int __init etrax_usb_hc_init(void) --{ -- static etrax_hc_t *hc; -- struct usb_bus *bus; -- struct usb_device *usb_rh; -- int i; -- -- DBFENTER; -- -- info("ETRAX 100LX USB-HCD %s (c) 2001-2003 Axis Communications AB\n", usb_hcd_version); -- -- hc = kmalloc(sizeof(etrax_hc_t), GFP_KERNEL); -- assert(hc != NULL); -- -- /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ -- /* Note that we specify sizeof(USB_EP_Desc_t) as the size, but also allocate -- SB descriptors from this cache. This is ok since sizeof(USB_EP_Desc_t) == -- sizeof(USB_SB_Desc_t). */ -- -- usb_desc_cache = kmem_cache_create("usb_desc_cache", sizeof(USB_EP_Desc_t), 0, -- SLAB_HWCACHE_ALIGN, 0, 0); -- assert(usb_desc_cache != NULL); -- -- top_half_reg_cache = kmem_cache_create("top_half_reg_cache", -- sizeof(usb_interrupt_registers_t), -- 0, SLAB_HWCACHE_ALIGN, 0, 0); -- assert(top_half_reg_cache != NULL); -- -- isoc_compl_cache = kmem_cache_create("isoc_compl_cache", -- sizeof(usb_isoc_complete_data_t), -- 0, SLAB_HWCACHE_ALIGN, 0, 0); -- assert(isoc_compl_cache != NULL); -- -- etrax_usb_bus = bus = usb_alloc_bus(&etrax_usb_device_operations); -- hc->bus = bus; -- bus->bus_name="ETRAX 100LX"; -- bus->hcpriv = hc; -- -- /* Initialize RH to the default address. -- And make sure that we have no status change indication */ -- hc->rh.numports = 2; /* The RH has two ports */ -- hc->rh.devnum = 1; -- hc->rh.wPortChange_1 = 0; -- hc->rh.wPortChange_2 = 0; -- -- /* Also initate the previous values to zero */ -- hc->rh.prev_wPortStatus_1 = 0; -- hc->rh.prev_wPortStatus_2 = 0; -- -- /* Initialize the intr-traffic flags */ -- /* FIXME: This isn't used. (Besides, the error field isn't initialized.) */ -- hc->intr.sleeping = 0; -- hc->intr.wq = NULL; -- -- epid_usage_bitmask = 0; -- epid_out_traffic = 0; -- -- /* Mark the invalid epid as being used. */ -- set_bit(INVALID_EPID, (void *)&epid_usage_bitmask); -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, INVALID_EPID); -- nop(); -- /* The valid bit should still be set ('invalid' is in our world; not the hardware's). */ -- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, yes) | -- IO_FIELD(R_USB_EPT_DATA, max_len, 1)); -- -- /* Mark the dummy epid as being used. */ -- set_bit(DUMMY_EPID, (void *)&epid_usage_bitmask); -- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, DUMMY_EPID); -- nop(); -- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, no) | -- IO_FIELD(R_USB_EPT_DATA, max_len, 1)); -- -- /* Initialize the urb list by initiating a head for each list. */ -- for (i = 0; i < NBR_OF_EPIDS; i++) { -- INIT_LIST_HEAD(&urb_list[i]); -- } -- spin_lock_init(&urb_list_lock); -- -- INIT_LIST_HEAD(&urb_unlink_list); -- -- -- /* Initiate the bulk start timer. */ -- init_timer(&bulk_start_timer); -- bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; -- bulk_start_timer.function = etrax_usb_bulk_start_timer_func; -- add_timer(&bulk_start_timer); -- -- -- /* Initiate the bulk eot timer. */ -- init_timer(&bulk_eot_timer); -- bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; -- bulk_eot_timer.function = etrax_usb_bulk_eot_timer_func; -- add_timer(&bulk_eot_timer); -- -- /* Set up the data structures for USB traffic. Note that this must be done before -- any interrupt that relies on sane DMA list occurrs. */ -- init_rx_buffers(); -- init_tx_bulk_ep(); -- init_tx_ctrl_ep(); -- init_tx_intr_ep(); -- init_tx_isoc_ep(); -- -- device_initialize(&fake_device); -- kobject_set_name(&fake_device.kobj, "etrax_usb"); -- kobject_add(&fake_device.kobj); -- kobject_uevent(&fake_device.kobj, KOBJ_ADD); -- hc->bus->controller = &fake_device; -- usb_register_bus(hc->bus); -- -- *R_IRQ_MASK2_SET = -- /* Note that these interrupts are not used. */ -- IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | -- /* Sub channel 1 (ctrl) descr. interrupts are used. */ -- IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | -- IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | -- /* Sub channel 3 (isoc) descr. interrupts are used. */ -- IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); -- -- /* Note that the dma9_descr interrupt is not used. */ -- *R_IRQ_MASK2_SET = -- IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | -- IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); -- -- /* FIXME: Enable iso_eof only when isoc traffic is running. */ -- *R_USB_IRQ_MASK_SET = -- IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | -- IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | -- IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | -- IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | -- IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); -- -- -- if (request_irq(ETRAX_USB_HC_IRQ, etrax_usb_hc_interrupt_top_half, 0, -- "ETRAX 100LX built-in USB (HC)", hc)) { -- err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); -- etrax_usb_hc_cleanup(); -- DBFEXIT; -- return -1; -- } -- -- if (request_irq(ETRAX_USB_RX_IRQ, etrax_usb_rx_interrupt, 0, -- "ETRAX 100LX built-in USB (Rx)", hc)) { -- err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); -- etrax_usb_hc_cleanup(); -- DBFEXIT; -- return -1; -- } -- -- if (request_irq(ETRAX_USB_TX_IRQ, etrax_usb_tx_interrupt, 0, -- "ETRAX 100LX built-in USB (Tx)", hc)) { -- err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); -- etrax_usb_hc_cleanup(); -- DBFEXIT; -- return -1; -- } -- -- /* R_USB_COMMAND: -- USB commands in host mode. The fields in this register should all be -- written to in one write. Do not read-modify-write one field at a time. A -- write to this register will trigger events in the USB controller and an -- incomplete command may lead to unpredictable results, and in worst case -- even to a deadlock in the controller. -- (Note however that the busy field is read-only, so no need to write to it.) */ -- -- /* Check the busy bit before writing to R_USB_COMMAND. */ -- -- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); -- -- /* Reset the USB interface. */ -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, nop) | -- IO_STATE(R_USB_COMMAND, port_cmd, reset) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); -- -- /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to 0x2A30 (10800), -- to guarantee that control traffic gets 10% of the bandwidth, and periodic transfer may -- allocate the rest (90%). This doesn't work though. Read on for a lenghty explanation. -- -- While there is a difference between rev. 2 and rev. 3 of the ETRAX 100LX regarding the NAK -- behaviour, it doesn't solve this problem. What happens is that a control transfer will not -- be interrupted in its data stage when PSTART happens (the point at which periodic traffic -- is started). Thus, if PSTART is set to 10800 and its IN or OUT token is NAKed until just before -- PSTART happens, it will continue the IN/OUT transfer as long as it's ACKed. After it's done, -- there may be too little time left for an isochronous transfer, causing an epid attention -- interrupt due to perror. The work-around for this is to let the control transfers run at the -- end of the frame instead of at the beginning, and will be interrupted just fine if it doesn't -- fit into the frame. However, since there will *always* be a control transfer at the beginning -- of the frame, regardless of what we set PSTART to, that transfer might be a 64-byte transfer -- which consumes up to 15% of the frame, leaving only 85% for periodic traffic. The solution to -- this would be to 'dummy allocate' 5% of the frame with the usb_claim_bandwidth function to make -- sure that the periodic transfers that are inserted will always fit in the frame. -- -- The idea was suggested that a control transfer could be split up into several 8 byte transfers, -- so that it would be interrupted by PSTART, but since this can't be done for an IN transfer this -- hasn't been implemented. -- -- The value 11960 is chosen to be just after the SOF token, with a couple of bit times extra -- for possible bit stuffing. */ -- -- *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); -- --#ifdef CONFIG_ETRAX_USB_HOST_PORT1 -- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); --#endif -- --#ifdef CONFIG_ETRAX_USB_HOST_PORT2 -- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); --#endif -- -- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); -- -- /* Configure the USB interface as a host controller. */ -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, nop) | -- IO_STATE(R_USB_COMMAND, port_cmd, reset) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); -- -- /* Note: Do not reset any ports here. Await the port status interrupts, to have a controlled -- sequence of resetting the ports. If we reset both ports now, and there are devices -- on both ports, we will get a bus error because both devices will answer the set address -- request. */ -- -- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); -- -- /* Start processing of USB traffic. */ -- *R_USB_COMMAND = -- IO_STATE(R_USB_COMMAND, port_sel, nop) | -- IO_STATE(R_USB_COMMAND, port_cmd, reset) | -- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -- -- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); -- -- usb_rh = usb_alloc_dev(NULL, hc->bus, 0); -- hc->bus->root_hub = usb_rh; -- usb_rh->state = USB_STATE_ADDRESS; -- usb_rh->speed = USB_SPEED_FULL; -- usb_rh->devnum = 1; -- hc->bus->devnum_next = 2; -- usb_rh->ep0.desc.wMaxPacketSize = __const_cpu_to_le16(64); -- usb_get_device_descriptor(usb_rh, USB_DT_DEVICE_SIZE); -- usb_new_device(usb_rh); -- -- DBFEXIT; -- -- return 0; --} -- --static void etrax_usb_hc_cleanup(void) --{ -- DBFENTER; -- -- free_irq(ETRAX_USB_HC_IRQ, NULL); -- free_irq(ETRAX_USB_RX_IRQ, NULL); -- free_irq(ETRAX_USB_TX_IRQ, NULL); -- -- usb_deregister_bus(etrax_usb_bus); -- -- /* FIXME: call kmem_cache_destroy here? */ -- -- DBFEXIT; --} - --module_init(etrax_usb_hc_init); --module_exit(etrax_usb_hc_cleanup); -+/* Module hooks */ -+module_init(module_hcd_init); -+module_exit(module_hcd_exit); ---- linux-2.6.19.2.orig/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.c 2007-02-26 20:58:29.000000000 +0100 -@@ -0,0 +1,4684 @@ -+/* -+ * -+ * ETRAX 100LX USB Host Controller Driver -+ * -+ * Copyright (C) 2005, 2006 Axis Communications AB -+ * -+ * Author: Konrad Eriksson -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core/hcd.h" -+#include "../core/hub.h" -+#include "hc-crisv10.h" -+#include "hc-cris-dbg.h" -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Host Controller settings */ -+/***************************************************************************/ -+/***************************************************************************/ -+ -+#define VERSION "1.00" -+#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB" -+#define DESCRIPTION "ETRAX 100LX USB Host Controller" -+ -+#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR -+#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR -+#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR -+ -+/* Number of physical ports in Etrax 100LX */ -+#define USB_ROOT_HUB_PORTS 2 -+ -+const char hc_name[] = "hc-crisv10"; -+const char product_desc[] = DESCRIPTION; -+ -+/* The number of epids is, among other things, used for pre-allocating -+ ctrl, bulk and isoc EP descriptors (one for each epid). -+ Assumed to be > 1 when initiating the DMA lists. */ -+#define NBR_OF_EPIDS 32 -+ -+/* Support interrupt traffic intervals up to 128 ms. */ -+#define MAX_INTR_INTERVAL 128 -+ -+/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP -+ table must be "invalid". By this we mean that we shouldn't care about epid -+ attentions for this epid, or at least handle them differently from epid -+ attentions for "valid" epids. This define determines which one to use -+ (don't change it). */ -+#define INVALID_EPID 31 -+/* A special epid for the bulk dummys. */ -+#define DUMMY_EPID 30 -+ -+/* Module settings */ -+ -+MODULE_DESCRIPTION(DESCRIPTION); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Konrad Eriksson "); -+ -+ -+/* Module parameters */ -+ -+/* 0 = No ports enabled -+ 1 = Only port 1 enabled (on board ethernet on devboard) -+ 2 = Only port 2 enabled (external connector on devboard) -+ 3 = Both ports enabled -+*/ -+static unsigned int ports = 3; -+module_param(ports, uint, S_IRUGO); -+MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use"); -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Shared global variables for this module */ -+/***************************************************************************/ -+/***************************************************************************/ -+ -+/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */ -+static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -+ -+static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -+ -+/* EP descriptor lists for period transfers. Must be 32-bit aligned. */ -+static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); -+static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4))); -+ -+static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -+static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4))); -+ -+static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -+ -+/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set, -+ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which -+ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the -+ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors -+ in each frame. */ -+static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); -+ -+/* List of URB pointers, where each points to the active URB for a epid. -+ For Bulk, Ctrl and Intr this means which URB that currently is added to -+ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as -+ URB has completed is the queue examined and the first URB in queue is -+ removed and moved to the activeUrbList while its state change to STARTED and -+ its transfer(s) gets added to DMA list (exception Isoc where URBs enter -+ state STARTED directly and added transfers added to DMA lists). */ -+static struct urb *activeUrbList[NBR_OF_EPIDS]; -+ -+/* Additional software state info for each epid */ -+static struct etrax_epid epid_state[NBR_OF_EPIDS]; -+ -+/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops -+ even if there is new data waiting to be processed */ -+static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0); -+static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0); -+ -+/* We want the start timer to expire before the eot timer, because the former -+ might start traffic, thus making it unnecessary for the latter to time -+ out. */ -+#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */ -+#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */ -+ -+/* Delay before a URB completion happen when it's scheduled to be delayed */ -+#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */ -+ -+/* Simplifying macros for checking software state info of a epid */ -+/* ----------------------------------------------------------------------- */ -+#define epid_inuse(epid) epid_state[epid].inuse -+#define epid_out_traffic(epid) epid_state[epid].out_traffic -+#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0) -+#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0) -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* DEBUG FUNCTIONS */ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Note that these functions are always available in their "__" variants, -+ for use in error situations. The "__" missing variants are controlled by -+ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */ -+static void __dump_urb(struct urb* purb) -+{ -+ struct crisv10_urb_priv *urb_priv = purb->hcpriv; -+ int urb_num = -1; -+ if(urb_priv) { -+ urb_num = urb_priv->urb_num; -+ } -+ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num); -+ printk("dev :0x%08lx\n", (unsigned long)purb->dev); -+ printk("pipe :0x%08x\n", purb->pipe); -+ printk("status :%d\n", purb->status); -+ printk("transfer_flags :0x%08x\n", purb->transfer_flags); -+ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); -+ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); -+ printk("actual_length :%d\n", purb->actual_length); -+ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); -+ printk("start_frame :%d\n", purb->start_frame); -+ printk("number_of_packets :%d\n", purb->number_of_packets); -+ printk("interval :%d\n", purb->interval); -+ printk("error_count :%d\n", purb->error_count); -+ printk("context :0x%08lx\n", (unsigned long)purb->context); -+ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); -+} -+ -+static void __dump_in_desc(volatile struct USB_IN_Desc *in) -+{ -+ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); -+ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); -+ printk(" command : 0x%04x\n", in->command); -+ printk(" next : 0x%08lx\n", in->next); -+ printk(" buf : 0x%08lx\n", in->buf); -+ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); -+ printk(" status : 0x%04x\n\n", in->status); -+} -+ -+static void __dump_sb_desc(volatile struct USB_SB_Desc *sb) -+{ -+ char tt = (sb->command & 0x30) >> 4; -+ char *tt_string; -+ -+ switch (tt) { -+ case 0: -+ tt_string = "zout"; -+ break; -+ case 1: -+ tt_string = "in"; -+ break; -+ case 2: -+ tt_string = "out"; -+ break; -+ case 3: -+ tt_string = "setup"; -+ break; -+ default: -+ tt_string = "unknown (weird)"; -+ } -+ -+ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb); -+ printk(" command:0x%04x (", sb->command); -+ printk("rem:%d ", (sb->command & 0x3f00) >> 8); -+ printk("full:%d ", (sb->command & 0x40) >> 6); -+ printk("tt:%d(%s) ", tt, tt_string); -+ printk("intr:%d ", (sb->command & 0x8) >> 3); -+ printk("eot:%d ", (sb->command & 0x2) >> 1); -+ printk("eol:%d)", sb->command & 0x1); -+ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len); -+ printk(" next:0x%08lx", sb->next); -+ printk(" buf:0x%08lx\n", sb->buf); -+} -+ -+ -+static void __dump_ep_desc(volatile struct USB_EP_Desc *ep) -+{ -+ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep); -+ printk(" command:0x%04x (", ep->command); -+ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8); -+ printk("enable:%d ", (ep->command & 0x10) >> 4); -+ printk("intr:%d ", (ep->command & 0x8) >> 3); -+ printk("eof:%d ", (ep->command & 0x2) >> 1); -+ printk("eol:%d)", ep->command & 0x1); -+ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len); -+ printk(" next:0x%08lx", ep->next); -+ printk(" sub:0x%08lx\n", ep->sub); -+} -+ -+static inline void __dump_ep_list(int pipe_type) -+{ -+ volatile struct USB_EP_Desc *ep; -+ volatile struct USB_EP_Desc *first_ep; -+ volatile struct USB_SB_Desc *sb; -+ -+ switch (pipe_type) -+ { -+ case PIPE_BULK: -+ first_ep = &TxBulkEPList[0]; -+ break; -+ case PIPE_CONTROL: -+ first_ep = &TxCtrlEPList[0]; -+ break; -+ case PIPE_INTERRUPT: -+ first_ep = &TxIntrEPList[0]; -+ break; -+ case PIPE_ISOCHRONOUS: -+ first_ep = &TxIsocEPList[0]; -+ break; -+ default: -+ warn("Cannot dump unknown traffic type"); -+ return; -+ } -+ ep = first_ep; -+ -+ printk("\n\nDumping EP list...\n\n"); -+ -+ do { -+ __dump_ep_desc(ep); -+ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ -+ sb = ep->sub ? phys_to_virt(ep->sub) : 0; -+ while (sb) { -+ __dump_sb_desc(sb); -+ sb = sb->next ? phys_to_virt(sb->next) : 0; -+ } -+ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next)); -+ -+ } while (ep != first_ep); -+} -+ -+static inline void __dump_ept_data(int epid) -+{ -+ unsigned long flags; -+ __u32 r_usb_ept_data; -+ -+ if (epid < 0 || epid > 31) { -+ printk("Cannot dump ept data for invalid epid %d\n", epid); -+ return; -+ } -+ -+ local_irq_save(flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -+ nop(); -+ r_usb_ept_data = *R_USB_EPT_DATA; -+ local_irq_restore(flags); -+ -+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); -+ if (r_usb_ept_data == 0) { -+ /* No need for more detailed printing. */ -+ return; -+ } -+ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); -+ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); -+ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); -+ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); -+ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); -+ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); -+ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); -+ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); -+ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); -+ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); -+ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); -+ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); -+} -+ -+static inline void __dump_ept_data_iso(int epid) -+{ -+ unsigned long flags; -+ __u32 ept_data; -+ -+ if (epid < 0 || epid > 31) { -+ printk("Cannot dump ept data for invalid epid %d\n", epid); -+ return; -+ } -+ -+ local_irq_save(flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -+ nop(); -+ ept_data = *R_USB_EPT_DATA_ISO; -+ local_irq_restore(flags); -+ -+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid); -+ if (ept_data == 0) { -+ /* No need for more detailed printing. */ -+ return; -+ } -+ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid, -+ ept_data)); -+ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port, -+ ept_data)); -+ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, -+ ept_data)); -+ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, -+ ept_data)); -+ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, -+ ept_data)); -+ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, -+ ept_data)); -+} -+ -+static inline void __dump_ept_data_list(void) -+{ -+ int i; -+ -+ printk("Dumping the whole R_USB_EPT_DATA list\n"); -+ -+ for (i = 0; i < 32; i++) { -+ __dump_ept_data(i); -+ } -+} -+ -+static void debug_epid(int epid) { -+ int i; -+ -+ if(epid_isoc(epid)) { -+ __dump_ept_data_iso(epid); -+ } else { -+ __dump_ept_data(epid); -+ } -+ -+ printk("Bulk:\n"); -+ for(i = 0; i < 32; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i])); -+ } -+ } -+ -+ printk("Ctrl:\n"); -+ for(i = 0; i < 32; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i])); -+ } -+ } -+ -+ printk("Intr:\n"); -+ for(i = 0; i < MAX_INTR_INTERVAL; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i])); -+ } -+ } -+ -+ printk("Isoc:\n"); -+ for(i = 0; i < 32; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i])); -+ } -+ } -+ -+ __dump_ept_data_list(); -+ __dump_ep_list(PIPE_INTERRUPT); -+ printk("\n\n"); -+} -+ -+ -+ -+char* hcd_status_to_str(__u8 bUsbStatus) { -+ static char hcd_status_str[128]; -+ hcd_status_str[0] = '\0'; -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) { -+ strcat(hcd_status_str, "ourun "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) { -+ strcat(hcd_status_str, "perror "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) { -+ strcat(hcd_status_str, "device_mode "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) { -+ strcat(hcd_status_str, "host_mode "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) { -+ strcat(hcd_status_str, "started "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) { -+ strcat(hcd_status_str, "running "); -+ } -+ return hcd_status_str; -+} -+ -+ -+char* sblist_to_str(struct USB_SB_Desc* sb_desc) { -+ static char sblist_to_str_buff[128]; -+ char tmp[32], tmp2[32]; -+ sblist_to_str_buff[0] = '\0'; -+ while(sb_desc != NULL) { -+ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) { -+ case 0: sprintf(tmp, "zout"); break; -+ case 1: sprintf(tmp, "in"); break; -+ case 2: sprintf(tmp, "out"); break; -+ case 3: sprintf(tmp, "setup"); break; -+ } -+ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len); -+ strcat(sblist_to_str_buff, tmp2); -+ if(sb_desc->next != 0) { -+ sb_desc = phys_to_virt(sb_desc->next); -+ } else { -+ sb_desc = NULL; -+ } -+ } -+ return sblist_to_str_buff; -+} -+ -+char* port_status_to_str(__u16 wPortStatus) { -+ static char port_status_str[128]; -+ port_status_str[0] = '\0'; -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) { -+ strcat(port_status_str, "connected "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) { -+ strcat(port_status_str, "enabled "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) { -+ strcat(port_status_str, "suspended "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) { -+ strcat(port_status_str, "reset "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) { -+ strcat(port_status_str, "full-speed "); -+ } else { -+ strcat(port_status_str, "low-speed "); -+ } -+ return port_status_str; -+} -+ -+ -+char* endpoint_to_str(struct usb_endpoint_descriptor *ed) { -+ static char endpoint_to_str_buff[128]; -+ char tmp[32]; -+ int epnum = ed->bEndpointAddress & 0x0F; -+ int dir = ed->bEndpointAddress & 0x80; -+ int type = ed->bmAttributes & 0x03; -+ endpoint_to_str_buff[0] = '\0'; -+ sprintf(endpoint_to_str_buff, "ep:%d ", epnum); -+ switch(type) { -+ case 0: -+ sprintf(tmp, " ctrl"); -+ break; -+ case 1: -+ sprintf(tmp, " isoc"); -+ break; -+ case 2: -+ sprintf(tmp, " bulk"); -+ break; -+ case 3: -+ sprintf(tmp, " intr"); -+ break; -+ } -+ strcat(endpoint_to_str_buff, tmp); -+ if(dir) { -+ sprintf(tmp, " in"); -+ } else { -+ sprintf(tmp, " out"); -+ } -+ strcat(endpoint_to_str_buff, tmp); -+ -+ return endpoint_to_str_buff; -+} -+ -+/* Debug helper functions for Transfer Controller */ -+char* pipe_to_str(unsigned int pipe) { -+ static char pipe_to_str_buff[128]; -+ char tmp[64]; -+ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe)); -+ sprintf(tmp, " type:%s", str_type(pipe)); -+ strcat(pipe_to_str_buff, tmp); -+ -+ sprintf(tmp, " dev:%d", usb_pipedevice(pipe)); -+ strcat(pipe_to_str_buff, tmp); -+ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe)); -+ strcat(pipe_to_str_buff, tmp); -+ return pipe_to_str_buff; -+} -+ -+ -+#define USB_DEBUG_DESC 1 -+ -+#ifdef USB_DEBUG_DESC -+#define dump_in_desc(x) __dump_in_desc(x) -+#define dump_sb_desc(...) __dump_sb_desc(...) -+#define dump_ep_desc(x) __dump_ep_desc(x) -+#define dump_ept_data(x) __dump_ept_data(x) -+#else -+#define dump_in_desc(...) do {} while (0) -+#define dump_sb_desc(...) do {} while (0) -+#define dump_ep_desc(...) do {} while (0) -+#endif -+ -+ -+/* Uncomment this to enable massive function call trace -+ #define USB_DEBUG_TRACE */ -+ -+#ifdef USB_DEBUG_TRACE -+#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) -+#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) -+#else -+#define DBFENTER do {} while (0) -+#define DBFEXIT do {} while (0) -+#endif -+ -+#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ -+{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} -+ -+/* Most helpful debugging aid */ -+#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__)))) -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Forward declarations */ -+/***************************************************************************/ -+/***************************************************************************/ -+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg); -+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg); -+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg); -+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg); -+ -+void rh_port_status_change(__u16[]); -+int rh_clear_port_feature(__u8, __u16); -+int rh_set_port_feature(__u8, __u16); -+static void rh_disable_port(unsigned int port); -+ -+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, -+ int timer); -+ -+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, -+ int mem_flags); -+static void tc_free_epid(struct usb_host_endpoint *ep); -+static int tc_allocate_epid(void); -+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status); -+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, -+ int status); -+ -+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, -+ int mem_flags); -+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb); -+ -+static inline struct urb *urb_list_first(int epid); -+static inline void urb_list_add(struct urb *urb, int epid, -+ int mem_flags); -+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid); -+static inline void urb_list_del(struct urb *urb, int epid); -+static inline void urb_list_move_last(struct urb *urb, int epid); -+static inline struct urb *urb_list_next(struct urb *urb, int epid); -+ -+int create_sb_for_urb(struct urb *urb, int mem_flags); -+int init_intr_urb(struct urb *urb, int mem_flags); -+ -+static inline void etrax_epid_set(__u8 index, __u32 data); -+static inline void etrax_epid_clear_error(__u8 index); -+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, -+ __u8 toggle); -+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout); -+static inline __u32 etrax_epid_get(__u8 index); -+ -+/* We're accessing the same register position in Etrax so -+ when we do full access the internal difference doesn't matter */ -+#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data) -+#define etrax_epid_iso_get(index) etrax_epid_get(index) -+ -+ -+static void tc_dma_process_isoc_urb(struct urb *urb); -+static void tc_dma_process_queue(int epid); -+static void tc_dma_unlink_intr_urb(struct urb *urb); -+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc); -+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc); -+ -+static void tc_bulk_start_timer_func(unsigned long dummy); -+static void tc_bulk_eot_timer_func(unsigned long dummy); -+ -+ -+/*************************************************************/ -+/*************************************************************/ -+/* Host Controler Driver block */ -+/*************************************************************/ -+/*************************************************************/ -+ -+/* HCD operations */ -+static irqreturn_t crisv10_hcd_top_irq(int irq, void*); -+static int crisv10_hcd_reset(struct usb_hcd *); -+static int crisv10_hcd_start(struct usb_hcd *); -+static void crisv10_hcd_stop(struct usb_hcd *); -+#ifdef CONFIG_PM -+static int crisv10_hcd_suspend(struct device *, u32, u32); -+static int crisv10_hcd_resume(struct device *, u32); -+#endif /* CONFIG_PM */ -+static int crisv10_hcd_get_frame(struct usb_hcd *); -+ -+static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags); -+static int tc_urb_dequeue(struct usb_hcd *, struct urb *); -+static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep); -+ -+static int rh_status_data_request(struct usb_hcd *, char *); -+static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16); -+ -+#ifdef CONFIG_PM -+static int crisv10_hcd_hub_suspend(struct usb_hcd *); -+static int crisv10_hcd_hub_resume(struct usb_hcd *); -+#endif /* CONFIG_PM */ -+#ifdef CONFIG_USB_OTG -+static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned); -+#endif /* CONFIG_USB_OTG */ -+ -+/* host controller driver interface */ -+static const struct hc_driver crisv10_hc_driver = -+ { -+ .description = hc_name, -+ .product_desc = product_desc, -+ .hcd_priv_size = sizeof(struct crisv10_hcd), -+ -+ /* Attaching IRQ handler manualy in probe() */ -+ /* .irq = crisv10_hcd_irq, */ -+ -+ .flags = HCD_USB11, -+ -+ /* called to init HCD and root hub */ -+ .reset = crisv10_hcd_reset, -+ .start = crisv10_hcd_start, -+ -+ /* cleanly make HCD stop writing memory and doing I/O */ -+ .stop = crisv10_hcd_stop, -+ -+ /* return current frame number */ -+ .get_frame_number = crisv10_hcd_get_frame, -+ -+ -+ /* Manage i/o requests via the Transfer Controller */ -+ .urb_enqueue = tc_urb_enqueue, -+ .urb_dequeue = tc_urb_dequeue, -+ -+ /* hw synch, freeing endpoint resources that urb_dequeue can't */ -+ .endpoint_disable = tc_endpoint_disable, -+ -+ -+ /* Root Hub support */ -+ .hub_status_data = rh_status_data_request, -+ .hub_control = rh_control_request, -+#ifdef CONFIG_PM -+ .hub_suspend = rh_suspend_request, -+ .hub_resume = rh_resume_request, -+#endif /* CONFIG_PM */ -+#ifdef CONFIG_USB_OTG -+ .start_port_reset = crisv10_hcd_start_port_reset, -+#endif /* CONFIG_USB_OTG */ -+ }; -+ -+ -+/* -+ * conversion between pointers to a hcd and the corresponding -+ * crisv10_hcd -+ */ -+ -+static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd) -+{ -+ return (struct crisv10_hcd *) hcd->hcd_priv; -+} -+ -+static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd) -+{ -+ return container_of((void *) hcd, struct usb_hcd, hcd_priv); -+} -+ -+/* check if specified port is in use */ -+static inline int port_in_use(unsigned int port) -+{ -+ return ports & (1 << port); -+} -+ -+/* number of ports in use */ -+static inline unsigned int num_ports(void) -+{ -+ unsigned int i, num = 0; -+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) -+ if (port_in_use(i)) -+ num++; -+ return num; -+} -+ -+/* map hub port number to the port number used internally by the HC */ -+static inline unsigned int map_port(unsigned int port) -+{ -+ unsigned int i, num = 0; -+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) -+ if (port_in_use(i)) -+ if (++num == port) -+ return i; -+ return -1; -+} -+ -+/* size of descriptors in slab cache */ -+#ifndef MAX -+#define MAX(x, y) ((x) > (y) ? (x) : (y)) -+#endif -+ -+ -+/******************************************************************/ -+/* Hardware Interrupt functions */ -+/******************************************************************/ -+ -+/* Fast interrupt handler for HC */ -+static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd) -+{ -+ struct usb_hcd *hcd = vcd; -+ struct crisv10_irq_reg reg; -+ __u32 irq_mask; -+ unsigned long flags; -+ -+ DBFENTER; -+ -+ ASSERT(hcd != NULL); -+ reg.hcd = hcd; -+ -+ /* Turn of other interrupts while handling these sensitive cases */ -+ local_irq_save(flags); -+ -+ /* Read out which interrupts that are flaged */ -+ irq_mask = *R_USB_IRQ_MASK_READ; -+ reg.r_usb_irq_mask_read = irq_mask; -+ -+ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that -+ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter -+ clears the ourun and perror fields of R_USB_STATUS. */ -+ reg.r_usb_status = *R_USB_STATUS; -+ -+ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn -+ interrupts. */ -+ reg.r_usb_epid_attn = *R_USB_EPID_ATTN; -+ -+ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the -+ port_status interrupt. */ -+ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1; -+ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2; -+ -+ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ -+ /* Note: the lower 11 bits contain the actual frame number, sent with each -+ sof. */ -+ reg.r_usb_fm_number = *R_USB_FM_NUMBER; -+ -+ /* Interrupts are handled in order of priority. */ -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { -+ crisv10_hcd_port_status_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { -+ crisv10_hcd_epid_attn_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { -+ crisv10_hcd_ctl_status_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { -+ crisv10_hcd_isoc_eof_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { -+ /* Update/restart the bulk start timer since obviously the channel is -+ running. */ -+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); -+ /* Update/restart the bulk eot timer since we just received an bulk eot -+ interrupt. */ -+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -+ -+ /* Check for finished bulk transfers on epids */ -+ check_finished_bulk_tx_epids(hcd, 0); -+ } -+ local_irq_restore(flags); -+ -+ DBFEXIT; -+ return IRQ_HANDLED; -+} -+ -+ -+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) { -+ struct usb_hcd *hcd = reg->hcd; -+ struct crisv10_urb_priv *urb_priv; -+ int epid; -+ DBFENTER; -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if (test_bit(epid, (void *)®->r_usb_epid_attn)) { -+ struct urb *urb; -+ __u32 ept_data; -+ int error_code; -+ -+ if (epid == DUMMY_EPID || epid == INVALID_EPID) { -+ /* We definitely don't care about these ones. Besides, they are -+ always disabled, so any possible disabling caused by the -+ epid attention interrupt is irrelevant. */ -+ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid); -+ continue; -+ } -+ -+ if(!epid_inuse(epid)) { -+ irq_err("Epid attention on epid:%d that isn't in use\n", epid); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ debug_epid(epid); -+ continue; -+ } -+ -+ /* Note that although there are separate R_USB_EPT_DATA and -+ R_USB_EPT_DATA_ISO registers, they are located at the same address and -+ are of the same size. In other words, this read should be ok for isoc -+ also. */ -+ ept_data = etrax_epid_get(epid); -+ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data); -+ -+ /* Get the active URB for this epid. We blatantly assume -+ that only this URB could have caused the epid attention. */ -+ urb = activeUrbList[epid]; -+ if (urb == NULL) { -+ irq_err("Attention on epid:%d error:%d with no active URB.\n", -+ epid, error_code); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ debug_epid(epid); -+ continue; -+ } -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ -+ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ -+ /* Isoc traffic doesn't have error_count_in/error_count_out. */ -+ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && -+ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 || -+ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) { -+ /* Check if URB allready is marked for late-finish, we can get -+ several 3rd error for Intr traffic when a device is unplugged */ -+ if(urb_priv->later_data == NULL) { -+ /* 3rd error. */ -+ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe), -+ (unsigned int)urb, urb_priv->urb_num); -+ -+ tc_finish_urb_later(hcd, urb, -EPROTO); -+ } -+ -+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { -+ irq_warn("Perror for epid:%d\n", epid); -+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ __dump_urb(urb); -+ debug_epid(epid); -+ -+ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { -+ /* invalid ep_id */ -+ panic("Perror because of invalid epid." -+ " Deconfigured too early?"); -+ } else { -+ /* past eof1, near eof, zout transfer, setup transfer */ -+ /* Dump the urb and the relevant EP descriptor. */ -+ panic("Something wrong with DMA descriptor contents." -+ " Too much traffic inserted?"); -+ } -+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { -+ /* buffer ourun */ -+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ __dump_urb(urb); -+ debug_epid(epid); -+ -+ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid); -+ } else { -+ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe)); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ __dump_urb(urb); -+ debug_epid(epid); -+ } -+ -+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, -+ stall)) { -+ /* Not really a protocol error, just says that the endpoint gave -+ a stall response. Note that error_code cannot be stall for isoc. */ -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ panic("Isoc traffic cannot stall"); -+ } -+ -+ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb); -+ tc_finish_urb(hcd, urb, -EPIPE); -+ -+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, -+ bus_error)) { -+ /* Two devices responded to a transaction request. Must be resolved -+ by software. FIXME: Reset ports? */ -+ panic("Bus error for epid %d." -+ " Two devices responded to transaction request\n", -+ epid); -+ -+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, -+ buffer_error)) { -+ /* DMA overrun or underrun. */ -+ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe)); -+ -+ /* It seems that error_code = buffer_error in -+ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS -+ are the same error. */ -+ tc_finish_urb(hcd, urb, -EPROTO); -+ } else { -+ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe)); -+ dump_ept_data(epid); -+ } -+ } -+ } -+ DBFEXIT; -+} -+ -+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg) -+{ -+ __u16 port_reg[USB_ROOT_HUB_PORTS]; -+ DBFENTER; -+ port_reg[0] = reg->r_usb_rh_port_status_1; -+ port_reg[1] = reg->r_usb_rh_port_status_2; -+ rh_port_status_change(port_reg); -+ DBFEXIT; -+} -+ -+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg) -+{ -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv *urb_priv; -+ -+ DBFENTER; -+ -+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -+ -+ /* Only check epids that are in use, is valid and has SB list */ -+ if (!epid_inuse(epid) || epid == INVALID_EPID || -+ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) { -+ /* Nothing here to see. */ -+ continue; -+ } -+ ASSERT(epid_isoc(epid)); -+ -+ /* Get the active URB for this epid (if any). */ -+ urb = activeUrbList[epid]; -+ if (urb == 0) { -+ isoc_warn("Ignoring NULL urb for epid:%d\n", epid); -+ continue; -+ } -+ if(!epid_out_traffic(epid)) { -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ if (urb_priv->urb_state == NOT_STARTED) { -+ /* If ASAP is not set and urb->start_frame is the current frame, -+ start the transfer. */ -+ if (!(urb->transfer_flags & URB_ISO_ASAP) && -+ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { -+ /* EP should not be enabled if we're waiting for start_frame */ -+ ASSERT((TxIsocEPList[epid].command & -+ IO_STATE(USB_EP_command, enable, yes)) == 0); -+ -+ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid); -+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ -+ /* This urb is now active. */ -+ urb_priv->urb_state = STARTED; -+ continue; -+ } -+ } -+ } -+ } -+ -+ DBFEXIT; -+} -+ -+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg) -+{ -+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd); -+ -+ DBFENTER; -+ ASSERT(crisv10_hcd); -+ -+ irq_dbg("ctr_status_irq, controller status: %s\n", -+ hcd_status_to_str(reg->r_usb_status)); -+ -+ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB -+ list for the corresponding epid? */ -+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { -+ panic("USB controller got ourun."); -+ } -+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { -+ -+ /* Before, etrax_usb_do_intr_recover was called on this epid if it was -+ an interrupt pipe. I don't see how re-enabling all EP descriptors -+ will help if there was a programming error. */ -+ panic("USB controller got perror."); -+ } -+ -+ /* Keep track of USB Controller, if it's running or not */ -+ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) { -+ crisv10_hcd->running = 1; -+ } else { -+ crisv10_hcd->running = 0; -+ } -+ -+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { -+ /* We should never operate in device mode. */ -+ panic("USB controller in device mode."); -+ } -+ -+ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably -+ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */ -+ set_bit(HCD_FLAG_SAW_IRQ, ®->hcd->flags); -+ -+ DBFEXIT; -+} -+ -+ -+/******************************************************************/ -+/* Host Controller interface functions */ -+/******************************************************************/ -+ -+static inline void crisv10_ready_wait(void) { -+ volatile int timeout = 10000; -+ /* Check the busy bit of USB controller in Etrax */ -+ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for USB controller to be idle\n"); -+ } -+} -+ -+/* reset host controller */ -+static int crisv10_hcd_reset(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ hcd_dbg(hcd, "reset\n"); -+ -+ -+ /* Reset the USB interface. */ -+ /* -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); -+ nop(); -+ */ -+ DBFEXIT; -+ return 0; -+} -+ -+/* start host controller */ -+static int crisv10_hcd_start(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ hcd_dbg(hcd, "start\n"); -+ -+ crisv10_ready_wait(); -+ -+ /* Start processing of USB traffic. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -+ -+ nop(); -+ -+ hcd->state = HC_STATE_RUNNING; -+ -+ DBFEXIT; -+ return 0; -+} -+ -+/* stop host controller */ -+static void crisv10_hcd_stop(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ hcd_dbg(hcd, "stop\n"); -+ crisv10_hcd_reset(hcd); -+ DBFEXIT; -+} -+ -+/* return the current frame number */ -+static int crisv10_hcd_get_frame(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ DBFEXIT; -+ return (*R_USB_FM_NUMBER & 0x7ff); -+} -+ -+#ifdef CONFIG_USB_OTG -+ -+static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port) -+{ -+ return 0; /* no-op for now */ -+} -+ -+#endif /* CONFIG_USB_OTG */ -+ -+ -+/******************************************************************/ -+/* Root Hub functions */ -+/******************************************************************/ -+ -+/* root hub status */ -+static const struct usb_hub_status rh_hub_status = -+ { -+ .wHubStatus = 0, -+ .wHubChange = 0, -+ }; -+ -+/* root hub descriptor */ -+static const u8 rh_hub_descr[] = -+ { -+ 0x09, /* bDescLength */ -+ 0x29, /* bDescriptorType */ -+ USB_ROOT_HUB_PORTS, /* bNbrPorts */ -+ 0x00, /* wHubCharacteristics */ -+ 0x00, -+ 0x01, /* bPwrOn2pwrGood */ -+ 0x00, /* bHubContrCurrent */ -+ 0x00, /* DeviceRemovable */ -+ 0xff /* PortPwrCtrlMask */ -+ }; -+ -+/* Actual holder of root hub status*/ -+struct crisv10_rh rh; -+ -+/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */ -+int rh_init(void) { -+ int i; -+ /* Reset port status flags */ -+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) { -+ rh.wPortChange[i] = 0; -+ rh.wPortStatusPrev[i] = 0; -+ } -+ return 0; -+} -+ -+#define RH_FEAT_MASK ((1<lock); -+ for (i = 1; i <= crisv10_hcd->num_ports; i++) { -+ if (rh.wPortChange[map_port(i)]) { -+ *buf |= (1 << i); -+ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i, -+ port_status_to_str(rh.wPortChange[map_port(i)]), -+ port_status_to_str(rh.wPortStatusPrev[map_port(i)])); -+ } -+ } -+ spin_unlock(&crisv10_hcd->lock); -+ DBFEXIT; -+ return *buf == 0 ? 0 : 1; -+} -+ -+/* Handle a control request for the root hub (called from hcd_driver) */ -+static int rh_control_request(struct usb_hcd *hcd, -+ u16 typeReq, -+ u16 wValue, -+ u16 wIndex, -+ char *buf, -+ u16 wLength) { -+ -+ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ int retval = 0; -+ int len; -+ DBFENTER; -+ -+ switch (typeReq) { -+ case GetHubDescriptor: -+ rh_dbg("GetHubDescriptor\n"); -+ len = min_t(unsigned int, sizeof rh_hub_descr, wLength); -+ memcpy(buf, rh_hub_descr, len); -+ buf[2] = crisv10_hcd->num_ports; -+ break; -+ case GetHubStatus: -+ rh_dbg("GetHubStatus\n"); -+ len = min_t(unsigned int, sizeof rh_hub_status, wLength); -+ memcpy(buf, &rh_hub_status, len); -+ break; -+ case GetPortStatus: -+ if (!wIndex || wIndex > crisv10_hcd->num_ports) -+ goto error; -+ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex, -+ port_status_to_str(rh.wPortChange[map_port(wIndex)]), -+ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)])); -+ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]); -+ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]); -+ break; -+ case SetHubFeature: -+ rh_dbg("SetHubFeature\n"); -+ case ClearHubFeature: -+ rh_dbg("ClearHubFeature\n"); -+ switch (wValue) { -+ case C_HUB_OVER_CURRENT: -+ case C_HUB_LOCAL_POWER: -+ rh_warn("Not implemented hub request:%d \n", typeReq); -+ /* not implemented */ -+ break; -+ default: -+ goto error; -+ } -+ break; -+ case SetPortFeature: -+ if (!wIndex || wIndex > crisv10_hcd->num_ports) -+ goto error; -+ if(rh_set_port_feature(map_port(wIndex), wValue)) -+ goto error; -+ break; -+ case ClearPortFeature: -+ if (!wIndex || wIndex > crisv10_hcd->num_ports) -+ goto error; -+ if(rh_clear_port_feature(map_port(wIndex), wValue)) -+ goto error; -+ break; -+ default: -+ rh_warn("Unknown hub request: %d\n", typeReq); -+ error: -+ retval = -EPIPE; -+ } -+ DBFEXIT; -+ return retval; -+} -+ -+int rh_set_port_feature(__u8 bPort, __u16 wFeature) { -+ __u8 bUsbCommand = 0; -+ switch(wFeature) { -+ case USB_PORT_FEAT_RESET: -+ rh_dbg("SetPortFeature: reset\n"); -+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset); -+ goto set; -+ break; -+ case USB_PORT_FEAT_SUSPEND: -+ rh_dbg("SetPortFeature: suspend\n"); -+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend); -+ goto set; -+ break; -+ case USB_PORT_FEAT_POWER: -+ rh_dbg("SetPortFeature: power\n"); -+ break; -+ case USB_PORT_FEAT_C_CONNECTION: -+ rh_dbg("SetPortFeature: c_connection\n"); -+ break; -+ case USB_PORT_FEAT_C_RESET: -+ rh_dbg("SetPortFeature: c_reset\n"); -+ break; -+ case USB_PORT_FEAT_C_OVER_CURRENT: -+ rh_dbg("SetPortFeature: c_over_current\n"); -+ break; -+ -+ set: -+ /* Select which port via the port_sel field */ -+ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1); -+ -+ /* Make sure the controller isn't busy. */ -+ crisv10_ready_wait(); -+ /* Send out the actual command to the USB controller */ -+ *R_USB_COMMAND = bUsbCommand; -+ -+ /* If port reset then also bring USB controller into running state */ -+ if(wFeature == USB_PORT_FEAT_RESET) { -+ /* Wait a while for controller to first become started after port reset */ -+ udelay(12000); /* 12ms blocking wait */ -+ -+ /* Make sure the controller isn't busy. */ -+ crisv10_ready_wait(); -+ -+ /* If all enabled ports were disabled the host controller goes down into -+ started mode, so we need to bring it back into the running state. -+ (This is safe even if it's already in the running state.) */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -+ } -+ -+ break; -+ default: -+ rh_dbg("SetPortFeature: unknown feature\n"); -+ return -1; -+ } -+ return 0; -+} -+ -+int rh_clear_port_feature(__u8 bPort, __u16 wFeature) { -+ switch(wFeature) { -+ case USB_PORT_FEAT_ENABLE: -+ rh_dbg("ClearPortFeature: enable\n"); -+ rh_disable_port(bPort); -+ break; -+ case USB_PORT_FEAT_SUSPEND: -+ rh_dbg("ClearPortFeature: suspend\n"); -+ break; -+ case USB_PORT_FEAT_POWER: -+ rh_dbg("ClearPortFeature: power\n"); -+ break; -+ -+ case USB_PORT_FEAT_C_ENABLE: -+ rh_dbg("ClearPortFeature: c_enable\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_SUSPEND: -+ rh_dbg("ClearPortFeature: c_suspend\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_CONNECTION: -+ rh_dbg("ClearPortFeature: c_connection\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_OVER_CURRENT: -+ rh_dbg("ClearPortFeature: c_over_current\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_RESET: -+ rh_dbg("ClearPortFeature: c_reset\n"); -+ goto clear; -+ clear: -+ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16)); -+ break; -+ default: -+ rh_dbg("ClearPortFeature: unknown feature\n"); -+ return -1; -+ } -+ return 0; -+} -+ -+ -+#ifdef CONFIG_PM -+/* Handle a suspend request for the root hub (called from hcd_driver) */ -+static int rh_suspend_request(struct usb_hcd *hcd) -+{ -+ return 0; /* no-op for now */ -+} -+ -+/* Handle a resume request for the root hub (called from hcd_driver) */ -+static int rh_resume_request(struct usb_hcd *hcd) -+{ -+ return 0; /* no-op for now */ -+} -+#endif /* CONFIG_PM */ -+ -+ -+ -+/* Wrapper function for workaround port disable registers in USB controller */ -+static void rh_disable_port(unsigned int port) { -+ volatile int timeout = 10000; -+ volatile char* usb_portx_disable; -+ switch(port) { -+ case 0: -+ usb_portx_disable = R_USB_PORT1_DISABLE; -+ break; -+ case 1: -+ usb_portx_disable = R_USB_PORT2_DISABLE; -+ break; -+ default: -+ /* Invalid port index */ -+ return; -+ } -+ /* Set disable flag in special register */ -+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); -+ /* Wait until not enabled anymore */ -+ while((rh.wPortStatusPrev[port] & -+ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for port %d to become disabled\n", port); -+ } -+ /* clear disable flag in special register */ -+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no); -+ rh_info("Physical port %d disabled\n", port+1); -+} -+ -+ -+/******************************************************************/ -+/* Transfer Controller (TC) functions */ -+/******************************************************************/ -+ -+/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it -+ dynamically? -+ To adjust it dynamically we would have to get an interrupt when we reach -+ the end of the rx descriptor list, or when we get close to the end, and -+ then allocate more descriptors. */ -+#define NBR_OF_RX_DESC 512 -+#define RX_DESC_BUF_SIZE 1024 -+#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) -+ -+ -+/* Local variables for Transfer Controller */ -+/* --------------------------------------- */ -+ -+/* This is a circular (double-linked) list of the active urbs for each epid. -+ The head is never removed, and new urbs are linked onto the list as -+ urb_entry_t elements. Don't reference urb_list directly; use the wrapper -+ functions instead (which includes spin_locks) */ -+static struct list_head urb_list[NBR_OF_EPIDS]; -+ -+/* Read about the need and usage of this lock in submit_ctrl_urb. */ -+/* Lock for URB lists for each EPID */ -+static spinlock_t urb_list_lock; -+ -+/* Lock for EPID array register (R_USB_EPT_x) in Etrax */ -+static spinlock_t etrax_epid_lock; -+ -+/* Lock for dma8 sub0 handling */ -+static spinlock_t etrax_dma8_sub0_lock; -+ -+/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. -+ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be -+ cache aligned. */ -+static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); -+static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); -+ -+/* Pointers into RxDescList. */ -+static volatile struct USB_IN_Desc *myNextRxDesc; -+static volatile struct USB_IN_Desc *myLastRxDesc; -+ -+/* A zout transfer makes a memory access at the address of its buf pointer, -+ which means that setting this buf pointer to 0 will cause an access to the -+ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes -+ (depending on DMA burst size) transfer. -+ Instead, we set it to 1, and point it to this buffer. */ -+static int zout_buffer[4] __attribute__ ((aligned (4))); -+ -+/* Cache for allocating new EP and SB descriptors. */ -+static kmem_cache_t *usb_desc_cache; -+ -+/* Cache for the data allocated in the isoc descr top half. */ -+static kmem_cache_t *isoc_compl_cache; -+ -+/* Cache for the data allocated when delayed finishing of URBs */ -+static kmem_cache_t *later_data_cache; -+ -+ -+/* Counter to keep track of how many Isoc EP we have sat up. Used to enable -+ and disable iso_eof interrupt. We only need these interrupts when we have -+ Isoc data endpoints (consumes CPU cycles). -+ FIXME: This could be more fine granular, so this interrupt is only enabled -+ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */ -+static int isoc_epid_counter; -+ -+/* Protecting wrapper functions for R_USB_EPT_x */ -+/* -------------------------------------------- */ -+static inline void etrax_epid_set(__u8 index, __u32 data) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ *R_USB_EPT_DATA = data; -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+} -+ -+static inline void etrax_epid_clear_error(__u8 index) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ *R_USB_EPT_DATA &= -+ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | -+ IO_MASK(R_USB_EPT_DATA, error_count_out) | -+ IO_MASK(R_USB_EPT_DATA, error_code)); -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+} -+ -+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, -+ __u8 toggle) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ if(dirout) { -+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); -+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); -+ } else { -+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); -+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); -+ } -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+} -+ -+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) { -+ unsigned long flags; -+ __u8 toggle; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ if (dirout) { -+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); -+ } else { -+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); -+ } -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+ return toggle; -+} -+ -+ -+static inline __u32 etrax_epid_get(__u8 index) { -+ unsigned long flags; -+ __u32 data; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ data = *R_USB_EPT_DATA; -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+ return data; -+} -+ -+ -+ -+ -+/* Main functions for Transfer Controller */ -+/* -------------------------------------- */ -+ -+/* Init structs, memories and lists used by Transfer Controller */ -+int tc_init(struct usb_hcd *hcd) { -+ int i; -+ /* Clear software state info for all epids */ -+ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS); -+ -+ /* Set Invalid and Dummy as being in use and disabled */ -+ epid_state[INVALID_EPID].inuse = 1; -+ epid_state[DUMMY_EPID].inuse = 1; -+ epid_state[INVALID_EPID].disabled = 1; -+ epid_state[DUMMY_EPID].disabled = 1; -+ -+ /* Clear counter for how many Isoc epids we have sat up */ -+ isoc_epid_counter = 0; -+ -+ /* Initialize the urb list by initiating a head for each list. -+ Also reset list hodling active URB for each epid */ -+ for (i = 0; i < NBR_OF_EPIDS; i++) { -+ INIT_LIST_HEAD(&urb_list[i]); -+ activeUrbList[i] = NULL; -+ } -+ -+ /* Init lock for URB lists */ -+ spin_lock_init(&urb_list_lock); -+ /* Init lock for Etrax R_USB_EPT register */ -+ spin_lock_init(&etrax_epid_lock); -+ /* Init lock for Etrax dma8 sub0 handling */ -+ spin_lock_init(&etrax_dma8_sub0_lock); -+ -+ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ -+ -+ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also -+ allocate SB descriptors from this cache. This is ok since -+ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */ -+ usb_desc_cache = kmem_cache_create("usb_desc_cache", -+ sizeof(struct USB_EP_Desc), 0, -+ SLAB_HWCACHE_ALIGN, 0, 0); -+ if(usb_desc_cache == NULL) { -+ return -ENOMEM; -+ } -+ -+ /* Create slab cache for speedy allocation of memory for isoc bottom-half -+ interrupt handling */ -+ isoc_compl_cache = -+ kmem_cache_create("isoc_compl_cache", -+ sizeof(struct crisv10_isoc_complete_data), -+ 0, SLAB_HWCACHE_ALIGN, 0, 0); -+ if(isoc_compl_cache == NULL) { -+ return -ENOMEM; -+ } -+ -+ /* Create slab cache for speedy allocation of memory for later URB finish -+ struct */ -+ later_data_cache = -+ kmem_cache_create("later_data_cache", -+ sizeof(struct urb_later_data), -+ 0, SLAB_HWCACHE_ALIGN, 0, 0); -+ if(later_data_cache == NULL) { -+ return -ENOMEM; -+ } -+ -+ -+ /* Initiate the bulk start timer. */ -+ init_timer(&bulk_start_timer); -+ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; -+ bulk_start_timer.function = tc_bulk_start_timer_func; -+ add_timer(&bulk_start_timer); -+ -+ -+ /* Initiate the bulk eot timer. */ -+ init_timer(&bulk_eot_timer); -+ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; -+ bulk_eot_timer.function = tc_bulk_eot_timer_func; -+ bulk_eot_timer.data = (unsigned long)hcd; -+ add_timer(&bulk_eot_timer); -+ -+ return 0; -+} -+ -+/* Uninitialize all resources used by Transfer Controller */ -+void tc_destroy(void) { -+ -+ /* Destroy all slab cache */ -+ kmem_cache_destroy(usb_desc_cache); -+ kmem_cache_destroy(isoc_compl_cache); -+ kmem_cache_destroy(later_data_cache); -+ -+ /* Remove timers */ -+ del_timer(&bulk_start_timer); -+ del_timer(&bulk_eot_timer); -+} -+ -+static void restart_dma8_sub0(void) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags); -+ /* Verify that the dma is not running */ -+ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) { -+ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP); -+ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) { -+ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next); -+ } -+ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID. -+ * ep->next is already a physical address; no need for a virt_to_phys. */ -+ *R_DMA_CH8_SUB0_EP = ep->next; -+ /* Restart the DMA */ -+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); -+ } -+ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags); -+} -+ -+/* queue an URB with the transfer controller (called from hcd_driver) */ -+static int tc_urb_enqueue(struct usb_hcd *hcd, -+ struct usb_host_endpoint *ep, -+ struct urb *urb, -+ gfp_t mem_flags) { -+ int epid; -+ int retval; -+ int bustime = 0; -+ int maxpacket; -+ unsigned long flags; -+ struct crisv10_urb_priv *urb_priv; -+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ DBFENTER; -+ -+ if(!(crisv10_hcd->running)) { -+ /* The USB Controller is not running, probably because no device is -+ attached. No idea to enqueue URBs then */ -+ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n", -+ (unsigned int)urb); -+ return -ENOENT; -+ } -+ -+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -+ /* Special case check for In Isoc transfers. Specification states that each -+ In Isoc transfer consists of one packet and therefore it should fit into -+ the transfer-buffer of an URB. -+ We do the check here to be sure (an invalid scenario can be produced with -+ parameters to the usbtest suite) */ -+ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) && -+ (urb->transfer_buffer_length < maxpacket)) { -+ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket); -+ return -EMSGSIZE; -+ } -+ -+ /* Check if there is enough bandwidth for periodic transfer */ -+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) { -+ /* only check (and later claim) if not already claimed */ -+ if (urb->bandwidth == 0) { -+ bustime = usb_check_bandwidth(urb->dev, urb); -+ if (bustime < 0) { -+ tc_err("Not enough periodic bandwidth\n"); -+ return -ENOSPC; -+ } -+ } -+ } -+ -+ /* Check if there is a epid for URBs destination, if not this function -+ set up one. */ -+ epid = tc_setup_epid(ep, urb, mem_flags); -+ if (epid < 0) { -+ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb); -+ DBFEXIT; -+ return -ENOMEM; -+ } -+ -+ if(urb == activeUrbList[epid]) { -+ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb); -+ return -ENXIO; -+ } -+ -+ if(urb_list_entry(urb, epid)) { -+ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb); -+ return -ENXIO; -+ } -+ -+ /* If we actively have flaged endpoint as disabled then refuse submition */ -+ if(epid_state[epid].disabled) { -+ return -ENOENT; -+ } -+ -+ /* Allocate and init HC-private data for URB */ -+ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) { -+ DBFEXIT; -+ return -ENOMEM; -+ } -+ urb_priv = urb->hcpriv; -+ -+ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n", -+ (unsigned int)urb, urb_priv->urb_num, epid, -+ pipe_to_str(urb->pipe), urb->transfer_buffer_length); -+ -+ /* Create and link SBs required for this URB */ -+ retval = create_sb_for_urb(urb, mem_flags); -+ if(retval != 0) { -+ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb, -+ urb_priv->urb_num); -+ urb_priv_free(hcd, urb); -+ DBFEXIT; -+ return retval; -+ } -+ -+ /* Init intr EP pool if this URB is a INTR transfer. This pool is later -+ used when inserting EPs in the TxIntrEPList. We do the alloc here -+ so we can't run out of memory later */ -+ if(usb_pipeint(urb->pipe)) { -+ retval = init_intr_urb(urb, mem_flags); -+ if(retval != 0) { -+ tc_warn("Failed to init Intr URB\n"); -+ urb_priv_free(hcd, urb); -+ DBFEXIT; -+ return retval; -+ } -+ } -+ -+ /* Disable other access when inserting USB */ -+ local_irq_save(flags); -+ -+ /* Claim bandwidth, if needed */ -+ if(bustime) { -+ usb_claim_bandwidth(urb->dev, urb, bustime, 0); -+ } -+ -+ /* Add URB to EP queue */ -+ urb_list_add(urb, epid, mem_flags); -+ -+ if(usb_pipeisoc(urb->pipe)) { -+ /* Special processing of Isoc URBs. */ -+ tc_dma_process_isoc_urb(urb); -+ } else { -+ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */ -+ tc_dma_process_queue(epid); -+ } -+ -+ local_irq_restore(flags); -+ -+ DBFEXIT; -+ return 0; -+} -+ -+/* remove an URB from the transfer controller queues (called from hcd_driver)*/ -+static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) { -+ struct crisv10_urb_priv *urb_priv; -+ unsigned long flags; -+ int epid; -+ -+ DBFENTER; -+ /* Disable interrupts here since a descriptor interrupt for the isoc epid -+ will modify the sb list. This could possibly be done more granular, but -+ urb_dequeue should not be used frequently anyway. -+ */ -+ local_irq_save(flags); -+ -+ urb_priv = urb->hcpriv; -+ -+ if (!urb_priv) { -+ /* This happens if a device driver calls unlink on an urb that -+ was never submitted (lazy driver) or if the urb was completed -+ while dequeue was being called. */ -+ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb); -+ local_irq_restore(flags); -+ return 0; -+ } -+ epid = urb_priv->epid; -+ -+ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", -+ (urb == activeUrbList[epid]) ? "active" : "queued", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), epid, urb->status, -+ (urb_priv->later_data) ? "later-sched" : ""); -+ -+ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB -+ that isn't active can be dequeued by just removing it from the queue */ -+ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) || -+ usb_pipeint(urb->pipe)) { -+ -+ /* Check if URB haven't gone further than the queue */ -+ if(urb != activeUrbList[epid]) { -+ ASSERT(urb_priv->later_data == NULL); -+ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue" -+ " (not active)\n", (unsigned int)urb, urb_priv->urb_num, -+ str_dir(urb->pipe), str_type(urb->pipe), epid); -+ -+ /* Finish the URB with error status from USB core */ -+ tc_finish_urb(hcd, urb, urb->status); -+ local_irq_restore(flags); -+ return 0; -+ } -+ } -+ -+ /* Set URB status to Unlink for handling when interrupt comes. */ -+ urb_priv->urb_state = UNLINK; -+ -+ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */ -+ switch(usb_pipetype(urb->pipe)) { -+ case PIPE_BULK: -+ /* Check if EP still is enabled */ -+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ /* Kicking dummy list out of the party. */ -+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); -+ break; -+ case PIPE_CONTROL: -+ /* Check if EP still is enabled */ -+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ break; -+ case PIPE_ISOCHRONOUS: -+ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in -+ finish_isoc_urb(). Because there might the case when URB is dequeued -+ but there are other valid URBs waiting */ -+ -+ /* Check if In Isoc EP still is enabled */ -+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ break; -+ case PIPE_INTERRUPT: -+ /* Special care is taken for interrupt URBs. EPs are unlinked in -+ tc_finish_urb */ -+ break; -+ default: -+ break; -+ } -+ -+ /* Asynchronous unlink, finish the URB later from scheduled or other -+ event (data finished, error) */ -+ tc_finish_urb_later(hcd, urb, urb->status); -+ -+ local_irq_restore(flags); -+ DBFEXIT; -+ return 0; -+} -+ -+ -+static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) { -+ volatile int timeout = 10000; -+ struct urb* urb; -+ struct crisv10_urb_priv* urb_priv; -+ unsigned long flags; -+ -+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ -+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ -+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ -+ -+ int type = epid_state[epid].type; -+ -+ /* Setting this flag will cause enqueue() to return -ENOENT for new -+ submitions on this endpoint and finish_urb() wont process queue further */ -+ epid_state[epid].disabled = 1; -+ -+ switch(type) { -+ case PIPE_BULK: -+ /* Check if EP still is enabled */ -+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); -+ -+ /* Do busy-wait until DMA not using this EP descriptor anymore */ -+ while((*R_DMA_CH8_SUB0_EP == -+ virt_to_phys(&TxBulkEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for" -+ " epid:%d\n", epid); -+ } -+ } -+ break; -+ -+ case PIPE_CONTROL: -+ /* Check if EP still is enabled */ -+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); -+ -+ /* Do busy-wait until DMA not using this EP descriptor anymore */ -+ while((*R_DMA_CH8_SUB1_EP == -+ virt_to_phys(&TxCtrlEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for" -+ " epid:%d\n", epid); -+ } -+ } -+ break; -+ -+ case PIPE_INTERRUPT: -+ local_irq_save(flags); -+ /* Disable all Intr EPs belonging to epid */ -+ first_ep = &TxIntrEPList[0]; -+ curr_ep = first_ep; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -+ /* Disable EP */ -+ next_ep->command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != first_ep); -+ -+ local_irq_restore(flags); -+ break; -+ -+ case PIPE_ISOCHRONOUS: -+ /* Check if EP still is enabled */ -+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid); -+ /* The EP was enabled, disable it. */ -+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ -+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for" -+ " epid:%d\n", epid); -+ } -+ } -+ break; -+ } -+ -+ local_irq_save(flags); -+ -+ /* Finish if there is active URB for this endpoint */ -+ if(activeUrbList[epid] != NULL) { -+ urb = activeUrbList[epid]; -+ urb_priv = urb->hcpriv; -+ ASSERT(urb_priv); -+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", -+ (urb == activeUrbList[epid]) ? "active" : "queued", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), epid, urb->status, -+ (urb_priv->later_data) ? "later-sched" : ""); -+ -+ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT); -+ ASSERT(activeUrbList[epid] == NULL); -+ } -+ -+ /* Finish any queued URBs for this endpoint. There won't be any resubmitions -+ because epid_disabled causes enqueue() to fail for this endpoint */ -+ while((urb = urb_list_first(epid)) != NULL) { -+ urb_priv = urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", -+ (urb == activeUrbList[epid]) ? "active" : "queued", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), epid, urb->status, -+ (urb_priv->later_data) ? "later-sched" : ""); -+ -+ tc_finish_urb(hcd, urb, -ENOENT); -+ } -+ epid_state[epid].disabled = 0; -+ local_irq_restore(flags); -+} -+ -+/* free resources associated with an endpoint (called from hcd_driver) */ -+static void tc_endpoint_disable(struct usb_hcd *hcd, -+ struct usb_host_endpoint *ep) { -+ DBFENTER; -+ /* Only free epid if it has been allocated. We get two endpoint_disable -+ requests for ctrl endpoints so ignore the second one */ -+ if(ep->hcpriv != NULL) { -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ int epid = ep_priv->epid; -+ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n", -+ (unsigned int)ep, (unsigned int)ep->hcpriv, -+ endpoint_to_str(&(ep->desc)), epid); -+ -+ tc_sync_finish_epid(hcd, epid); -+ -+ ASSERT(activeUrbList[epid] == NULL); -+ ASSERT(list_empty(&urb_list[epid])); -+ -+ tc_free_epid(ep); -+ } else { -+ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep, -+ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc))); -+ } -+ DBFEXIT; -+} -+ -+static void tc_finish_urb_later_proc(void *data) { -+ unsigned long flags; -+ struct urb_later_data* uld = (struct urb_later_data*)data; -+ local_irq_save(flags); -+ if(uld->urb == NULL) { -+ late_dbg("Later finish of URB = NULL (allready finished)\n"); -+ } else { -+ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv; -+ ASSERT(urb_priv); -+ if(urb_priv->urb_num == uld->urb_num) { -+ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb), -+ urb_priv->urb_num); -+ if(uld->status != uld->urb->status) { -+ errno_dbg("Later-finish URB with status:%d, later-status:%d\n", -+ uld->urb->status, uld->status); -+ } -+ if(uld != urb_priv->later_data) { -+ panic("Scheduled uld not same as URBs uld\n"); -+ } -+ tc_finish_urb(uld->hcd, uld->urb, uld->status); -+ } else { -+ late_warn("Ignoring later finish of URB:0x%x[%d]" -+ ", urb_num doesn't match current URB:0x%x[%d]", -+ (unsigned int)(uld->urb), uld->urb_num, -+ (unsigned int)(uld->urb), urb_priv->urb_num); -+ } -+ } -+ local_irq_restore(flags); -+ kmem_cache_free(later_data_cache, uld); -+} -+ -+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, -+ int status) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ struct urb_later_data* uld; -+ -+ ASSERT(urb_priv); -+ -+ if(urb_priv->later_data != NULL) { -+ /* Later-finish allready scheduled for this URB, just update status to -+ return when finishing later */ -+ errno_dbg("Later-finish schedule change URB status:%d with new" -+ " status:%d\n", urb_priv->later_data->status, status); -+ -+ urb_priv->later_data->status = status; -+ return; -+ } -+ -+ uld = kmem_cache_alloc(later_data_cache, SLAB_ATOMIC); -+ ASSERT(uld); -+ -+ uld->hcd = hcd; -+ uld->urb = urb; -+ uld->urb_num = urb_priv->urb_num; -+ uld->status = status; -+ -+ INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld); -+ urb_priv->later_data = uld; -+ -+ /* Schedule the finishing of the URB to happen later */ -+ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY); -+} -+ -+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, -+ int status); -+ -+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) { -+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ int epid; -+ char toggle; -+ int urb_num; -+ -+ DBFENTER; -+ ASSERT(urb_priv != NULL); -+ epid = urb_priv->epid; -+ urb_num = urb_priv->urb_num; -+ -+ if(urb != activeUrbList[epid]) { -+ if(urb_list_entry(urb, epid)) { -+ /* Remove this URB from the list. Only happens when URB are finished -+ before having been processed (dequeing) */ -+ urb_list_del(urb, epid); -+ } else { -+ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for" -+ " epid:%d\n", (unsigned int)urb, urb_num, epid); -+ } -+ } -+ -+ /* Cancel any pending later-finish of this URB */ -+ if(urb_priv->later_data) { -+ urb_priv->later_data->urb = NULL; -+ } -+ -+ /* For an IN pipe, we always set the actual length, regardless of whether -+ there was an error or not (which means the device driver can use the data -+ if it wants to). */ -+ if(usb_pipein(urb->pipe)) { -+ urb->actual_length = urb_priv->rx_offset; -+ } else { -+ /* Set actual_length for OUT urbs also; the USB mass storage driver seems -+ to want that. */ -+ if (status == 0 && urb->status == -EINPROGRESS) { -+ urb->actual_length = urb->transfer_buffer_length; -+ } else { -+ /* We wouldn't know of any partial writes if there was an error. */ -+ urb->actual_length = 0; -+ } -+ } -+ -+ -+ /* URB status mangling */ -+ if(urb->status == -EINPROGRESS) { -+ /* The USB core hasn't changed the status, let's set our finish status */ -+ urb->status = status; -+ -+ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) && -+ usb_pipein(urb->pipe) && -+ (urb->actual_length != urb->transfer_buffer_length)) { -+ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's -+ max length) is to be treated as an error. */ -+ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short" -+ " data:%d\n", (unsigned int)urb, urb_num, -+ urb->actual_length); -+ urb->status = -EREMOTEIO; -+ } -+ -+ if(urb_priv->urb_state == UNLINK) { -+ /* URB has been requested to be unlinked asynchronously */ -+ urb->status = -ECONNRESET; -+ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n", -+ (unsigned int)urb, urb_num, urb->status); -+ } -+ } else { -+ /* The USB Core wants to signal some error via the URB, pass it through */ -+ } -+ -+ /* use completely different finish function for Isoc URBs */ -+ if(usb_pipeisoc(urb->pipe)) { -+ tc_finish_isoc_urb(hcd, urb, status); -+ return; -+ } -+ -+ /* Do special unlinking of EPs for Intr traffic */ -+ if(usb_pipeint(urb->pipe)) { -+ tc_dma_unlink_intr_urb(urb); -+ } -+ -+ /* Release allocated bandwidth for periodic transfers */ -+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) -+ usb_release_bandwidth(urb->dev, urb, 0); -+ -+ /* This URB is active on EP */ -+ if(urb == activeUrbList[epid]) { -+ /* We need to fiddle with the toggle bits because the hardware doesn't do -+ it for us. */ -+ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe)); -+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), -+ usb_pipeout(urb->pipe), toggle); -+ -+ /* Checks for Ctrl and Bulk EPs */ -+ switch(usb_pipetype(urb->pipe)) { -+ case PIPE_BULK: -+ /* Check so Bulk EP realy is disabled before finishing active URB */ -+ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) == -+ IO_STATE(USB_EP_command, enable, no)); -+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to -+ process Bulk EP. */ -+ TxBulkEPList[epid].sub = 0; -+ /* No need to wait for the DMA before changing the next pointer. -+ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use -+ the last one (INVALID_EPID) for actual traffic. */ -+ TxBulkEPList[epid].next = -+ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); -+ break; -+ case PIPE_CONTROL: -+ /* Check so Ctrl EP realy is disabled before finishing active URB */ -+ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) == -+ IO_STATE(USB_EP_command, enable, no)); -+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to -+ process Ctrl EP. */ -+ TxCtrlEPList[epid].sub = 0; -+ break; -+ } -+ } -+ -+ /* Free HC-private URB data*/ -+ urb_priv_free(hcd, urb); -+ -+ if(urb->status) { -+ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", -+ (unsigned int)urb, urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb->actual_length, urb->status); -+ } else { -+ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", -+ (unsigned int)urb, urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb->actual_length, urb->status); -+ } -+ -+ /* If we just finished an active URB, clear active pointer. */ -+ if (urb == activeUrbList[epid]) { -+ /* Make URB not active on EP anymore */ -+ activeUrbList[epid] = NULL; -+ -+ if(urb->status == 0) { -+ /* URB finished sucessfully, process queue to see if there are any more -+ URBs waiting before we call completion function.*/ -+ if(crisv10_hcd->running) { -+ /* Only process queue if USB controller is running */ -+ tc_dma_process_queue(epid); -+ } else { -+ tc_warn("No processing of queue for epid:%d, USB Controller not" -+ " running\n", epid); -+ } -+ } -+ } -+ -+ /* Hand the URB from HCD to its USB device driver, using its completion -+ functions */ -+ usb_hcd_giveback_urb (hcd, urb); -+ -+ /* Check the queue once more if the URB returned with error, because we -+ didn't do it before the completion function because the specification -+ states that the queue should not restart until all it's unlinked -+ URBs have been fully retired, with the completion functions run */ -+ if(crisv10_hcd->running) { -+ /* Only process queue if USB controller is running */ -+ tc_dma_process_queue(epid); -+ } else { -+ tc_warn("No processing of queue for epid:%d, USB Controller not running\n", -+ epid); -+ } -+ -+ DBFEXIT; -+} -+ -+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, -+ int status) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ int epid, i; -+ volatile int timeout = 10000; -+ -+ ASSERT(urb_priv); -+ epid = urb_priv->epid; -+ -+ ASSERT(usb_pipeisoc(urb->pipe)); -+ -+ /* Set that all isoc packets have status and length set before -+ completing the urb. */ -+ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){ -+ urb->iso_frame_desc[i].actual_length = 0; -+ urb->iso_frame_desc[i].status = -EPROTO; -+ } -+ -+ /* Check if the URB is currently active (done or error) */ -+ if(urb == activeUrbList[epid]) { -+ /* Check if there are another In Isoc URB queued for this epid */ -+ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) { -+ /* Move it from queue to active and mark it started so Isoc transfers -+ won't be interrupted. -+ All Isoc URBs data transfers are already added to DMA lists so we -+ don't have to insert anything in DMA lists here. */ -+ activeUrbList[epid] = urb_list_first(epid); -+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state = -+ STARTED; -+ urb_list_del(activeUrbList[epid], epid); -+ -+ if(urb->status) { -+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" -+ " status:%d, new waiting URB:0x%x[%d]\n", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb_priv->isoc_packet_counter, -+ urb->number_of_packets, urb->status, -+ (unsigned int)activeUrbList[epid], -+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num); -+ } -+ -+ } else { /* No other URB queued for this epid */ -+ if(urb->status) { -+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" -+ " status:%d, no new URB waiting\n", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb_priv->isoc_packet_counter, -+ urb->number_of_packets, urb->status); -+ } -+ -+ /* Check if EP is still enabled, then shut it down. */ -+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid); -+ -+ /* Should only occur for In Isoc EPs where SB isn't consumed. */ -+ ASSERT(usb_pipein(urb->pipe)); -+ -+ /* Disable it and wait for it to stop */ -+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ -+ /* Ah, the luxury of busy-wait. */ -+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid); -+ } -+ } -+ -+ /* Unlink SB to say that epid is finished. */ -+ TxIsocEPList[epid].sub = 0; -+ TxIsocEPList[epid].hw_len = 0; -+ -+ /* No URB active for EP anymore */ -+ activeUrbList[epid] = NULL; -+ } -+ } else { /* Finishing of not active URB (queued up with SBs thought) */ -+ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d," -+ " SB queued but not active\n", -+ (unsigned int)urb, str_dir(urb->pipe), -+ urb_priv->isoc_packet_counter, urb->number_of_packets, -+ urb->status); -+ if(usb_pipeout(urb->pipe)) { -+ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */ -+ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb; -+ -+ iter_sb = TxIsocEPList[epid].sub ? -+ phys_to_virt(TxIsocEPList[epid].sub) : 0; -+ prev_sb = 0; -+ -+ /* SB that is linked before this URBs first SB */ -+ while (iter_sb && (iter_sb != urb_priv->first_sb)) { -+ prev_sb = iter_sb; -+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -+ } -+ -+ if (iter_sb == 0) { -+ /* Unlink of the URB currently being transmitted. */ -+ prev_sb = 0; -+ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; -+ } -+ -+ while (iter_sb && (iter_sb != urb_priv->last_sb)) { -+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -+ } -+ -+ if (iter_sb) { -+ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -+ } else { -+ /* This should only happen if the DMA has completed -+ processing the SB list for this EP while interrupts -+ are disabled. */ -+ isoc_dbg("Isoc urb not found, already sent?\n"); -+ next_sb = 0; -+ } -+ if (prev_sb) { -+ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; -+ } else { -+ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; -+ } -+ } -+ } -+ -+ /* Free HC-private URB data*/ -+ urb_priv_free(hcd, urb); -+ -+ usb_release_bandwidth(urb->dev, urb, 0); -+ -+ /* Hand the URB from HCD to its USB device driver, using its completion -+ functions */ -+ usb_hcd_giveback_urb (hcd, urb); -+} -+ -+static __u32 urb_num = 0; -+ -+/* allocate and initialize URB private data */ -+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, -+ int mem_flags) { -+ struct crisv10_urb_priv *urb_priv; -+ -+ urb_priv = kmalloc(sizeof *urb_priv, mem_flags); -+ if (!urb_priv) -+ return -ENOMEM; -+ memset(urb_priv, 0, sizeof *urb_priv); -+ -+ urb_priv->epid = epid; -+ urb_priv->urb_state = NOT_STARTED; -+ -+ urb->hcpriv = urb_priv; -+ /* Assign URB a sequence number, and increment counter */ -+ urb_priv->urb_num = urb_num; -+ urb_num++; -+ return 0; -+} -+ -+/* free URB private data */ -+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) { -+ int i; -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ ASSERT(urb_priv != 0); -+ -+ /* Check it has any SBs linked that needs to be freed*/ -+ if(urb_priv->first_sb != NULL) { -+ struct USB_SB_Desc *next_sb, *first_sb, *last_sb; -+ int i = 0; -+ first_sb = urb_priv->first_sb; -+ last_sb = urb_priv->last_sb; -+ ASSERT(last_sb); -+ while(first_sb != last_sb) { -+ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next); -+ kmem_cache_free(usb_desc_cache, first_sb); -+ first_sb = next_sb; -+ i++; -+ } -+ kmem_cache_free(usb_desc_cache, last_sb); -+ i++; -+ } -+ -+ /* Check if it has any EPs in its Intr pool that also needs to be freed */ -+ if(urb_priv->intr_ep_pool_length > 0) { -+ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) { -+ kfree(urb_priv->intr_ep_pool[i]); -+ } -+ /* -+ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n", -+ urb_priv->intr_ep_pool_length, (unsigned int)urb); -+ */ -+ } -+ -+ kfree(urb_priv); -+ urb->hcpriv = NULL; -+} -+ -+static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) { -+ struct crisv10_ep_priv *ep_priv; -+ -+ ep_priv = kmalloc(sizeof *ep_priv, mem_flags); -+ if (!ep_priv) -+ return -ENOMEM; -+ memset(ep_priv, 0, sizeof *ep_priv); -+ -+ ep->hcpriv = ep_priv; -+ return 0; -+} -+ -+static void ep_priv_free(struct usb_host_endpoint *ep) { -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ ASSERT(ep_priv); -+ kfree(ep_priv); -+ ep->hcpriv = NULL; -+} -+ -+/* EPID handling functions, managing EP-list in Etrax through wrappers */ -+/* ------------------------------------------------------------------- */ -+ -+/* Sets up a new EPID for an endpoint or returns existing if found */ -+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, -+ int mem_flags) { -+ int epid; -+ char devnum, endpoint, out_traffic, slow; -+ int maxlen; -+ __u32 epid_data; -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ -+ DBFENTER; -+ -+ /* Check if a valid epid already is setup for this endpoint */ -+ if(ep_priv != NULL) { -+ return ep_priv->epid; -+ } -+ -+ /* We must find and initiate a new epid for this urb. */ -+ epid = tc_allocate_epid(); -+ -+ if (epid == -1) { -+ /* Failed to allocate a new epid. */ -+ DBFEXIT; -+ return epid; -+ } -+ -+ /* We now have a new epid to use. Claim it. */ -+ epid_state[epid].inuse = 1; -+ -+ /* Init private data for new endpoint */ -+ if(ep_priv_create(ep, mem_flags) != 0) { -+ return -ENOMEM; -+ } -+ ep_priv = ep->hcpriv; -+ ep_priv->epid = epid; -+ -+ devnum = usb_pipedevice(urb->pipe); -+ endpoint = usb_pipeendpoint(urb->pipe); -+ slow = (urb->dev->speed == USB_SPEED_LOW); -+ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -+ -+ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { -+ /* We want both IN and OUT control traffic to be put on the same -+ EP/SB list. */ -+ out_traffic = 1; -+ } else { -+ out_traffic = usb_pipeout(urb->pipe); -+ } -+ -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | -+ /* FIXME: Change any to the actual port? */ -+ IO_STATE(R_USB_EPT_DATA_ISO, port, any) | -+ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | -+ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | -+ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); -+ etrax_epid_iso_set(epid, epid_data); -+ } else { -+ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) | -+ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | -+ /* FIXME: Change any to the actual port? */ -+ IO_STATE(R_USB_EPT_DATA, port, any) | -+ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | -+ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | -+ IO_FIELD(R_USB_EPT_DATA, dev, devnum); -+ etrax_epid_set(epid, epid_data); -+ } -+ -+ epid_state[epid].out_traffic = out_traffic; -+ epid_state[epid].type = usb_pipetype(urb->pipe); -+ -+ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n", -+ (unsigned int)ep, epid, devnum, endpoint, maxlen, -+ str_type(urb->pipe), out_traffic ? "out" : "in", -+ slow ? "low" : "full"); -+ -+ /* Enable Isoc eof interrupt if we set up the first Isoc epid */ -+ if(usb_pipeisoc(urb->pipe)) { -+ isoc_epid_counter++; -+ if(isoc_epid_counter == 1) { -+ isoc_warn("Enabled Isoc eof interrupt\n"); -+ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); -+ } -+ } -+ -+ DBFEXIT; -+ return epid; -+} -+ -+static void tc_free_epid(struct usb_host_endpoint *ep) { -+ unsigned long flags; -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ int epid; -+ volatile int timeout = 10000; -+ -+ DBFENTER; -+ -+ if (ep_priv == NULL) { -+ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep); -+ DBFEXIT; -+ return; -+ } -+ -+ epid = ep_priv->epid; -+ -+ /* Disable Isoc eof interrupt if we free the last Isoc epid */ -+ if(epid_isoc(epid)) { -+ ASSERT(isoc_epid_counter > 0); -+ isoc_epid_counter--; -+ if(isoc_epid_counter == 0) { -+ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); -+ isoc_warn("Disabled Isoc eof interrupt\n"); -+ } -+ } -+ -+ /* Take lock manualy instead of in epid_x_x wrappers, -+ because we need to be polling here */ -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -+ nop(); -+ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for epid:%d to drop hold\n", epid); -+ } -+ /* This will, among other things, set the valid field to 0. */ -+ *R_USB_EPT_DATA = 0; -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+ -+ /* Free resource in software state info list */ -+ epid_state[epid].inuse = 0; -+ -+ /* Free private endpoint data */ -+ ep_priv_free(ep); -+ -+ DBFEXIT; -+} -+ -+static int tc_allocate_epid(void) { -+ int i; -+ DBFENTER; -+ for (i = 0; i < NBR_OF_EPIDS; i++) { -+ if (!epid_inuse(i)) { -+ DBFEXIT; -+ return i; -+ } -+ } -+ -+ tc_warn("Found no free epids\n"); -+ DBFEXIT; -+ return -1; -+} -+ -+ -+/* Wrappers around the list functions (include/linux/list.h). */ -+/* ---------------------------------------------------------- */ -+static inline int __urb_list_empty(int epid) { -+ int retval; -+ retval = list_empty(&urb_list[epid]); -+ return retval; -+} -+ -+/* Returns first urb for this epid, or NULL if list is empty. */ -+static inline struct urb *urb_list_first(int epid) { -+ unsigned long flags; -+ struct urb *first_urb = 0; -+ spin_lock_irqsave(&urb_list_lock, flags); -+ if (!__urb_list_empty(epid)) { -+ /* Get the first urb (i.e. head->next). */ -+ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); -+ first_urb = urb_entry->urb; -+ } -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return first_urb; -+} -+ -+/* Adds an urb_entry last in the list for this epid. */ -+static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) { -+ unsigned long flags; -+ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags); -+ ASSERT(urb_entry); -+ -+ urb_entry->urb = urb; -+ spin_lock_irqsave(&urb_list_lock, flags); -+ list_add_tail(&urb_entry->list, &urb_list[epid]); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+} -+ -+/* Search through the list for an element that contains this urb. (The list -+ is expected to be short and the one we are about to delete will often be -+ the first in the list.) -+ Should be protected by spin_locks in calling function */ -+static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) { -+ struct list_head *entry; -+ struct list_head *tmp; -+ urb_entry_t *urb_entry; -+ -+ list_for_each_safe(entry, tmp, &urb_list[epid]) { -+ urb_entry = list_entry(entry, urb_entry_t, list); -+ ASSERT(urb_entry); -+ ASSERT(urb_entry->urb); -+ -+ if (urb_entry->urb == urb) { -+ return urb_entry; -+ } -+ } -+ return 0; -+} -+ -+/* Same function as above but for global use. Protects list by spinlock */ -+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return (urb_entry); -+} -+ -+/* Delete an urb from the list. */ -+static inline void urb_list_del(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ -+ /* Delete entry and free. */ -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ ASSERT(urb_entry); -+ -+ list_del(&urb_entry->list); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ kfree(urb_entry); -+} -+ -+/* Move an urb to the end of the list. */ -+static inline void urb_list_move_last(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ ASSERT(urb_entry); -+ -+ list_del(&urb_entry->list); -+ list_add_tail(&urb_entry->list, &urb_list[epid]); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+} -+ -+/* Get the next urb in the list. */ -+static inline struct urb *urb_list_next(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ ASSERT(urb_entry); -+ -+ if (urb_entry->list.next != &urb_list[epid]) { -+ struct list_head *elem = urb_entry->list.next; -+ urb_entry = list_entry(elem, urb_entry_t, list); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return urb_entry->urb; -+ } else { -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return NULL; -+ } -+} -+ -+struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc, -+ int mem_flags) { -+ struct USB_EP_Desc *ep_desc; -+ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags); -+ if(ep_desc == NULL) -+ return NULL; -+ memset(ep_desc, 0, sizeof(struct USB_EP_Desc)); -+ -+ ep_desc->hw_len = 0; -+ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | -+ IO_STATE(USB_EP_command, enable, yes)); -+ if(sb_desc == NULL) { -+ ep_desc->sub = 0; -+ } else { -+ ep_desc->sub = virt_to_phys(sb_desc); -+ } -+ return ep_desc; -+} -+ -+#define TT_ZOUT 0 -+#define TT_IN 1 -+#define TT_OUT 2 -+#define TT_SETUP 3 -+ -+#define CMD_EOL IO_STATE(USB_SB_command, eol, yes) -+#define CMD_INTR IO_STATE(USB_SB_command, intr, yes) -+#define CMD_FULL IO_STATE(USB_SB_command, full, yes) -+ -+/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT -+ SBs. Also used by create_sb_in() to avoid same allocation procedure at two -+ places */ -+struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data, -+ int datalen, int mem_flags) { -+ struct USB_SB_Desc *sb_desc; -+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); -+ if(sb_desc == NULL) -+ return NULL; -+ memset(sb_desc, 0, sizeof(struct USB_SB_Desc)); -+ -+ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) | -+ IO_STATE(USB_SB_command, eot, yes); -+ -+ sb_desc->sw_len = datalen; -+ if(data != NULL) { -+ sb_desc->buf = virt_to_phys(data); -+ } else { -+ sb_desc->buf = 0; -+ } -+ if(sb_prev != NULL) { -+ sb_prev->next = virt_to_phys(sb_desc); -+ } -+ return sb_desc; -+} -+ -+/* Creates a copy of an existing SB by allocation space for it and copy -+ settings */ -+struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) { -+ struct USB_SB_Desc *sb_desc; -+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); -+ if(sb_desc == NULL) -+ return NULL; -+ -+ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc)); -+ return sb_desc; -+} -+ -+/* A specific create_sb function for creation of in SBs. This is due to -+ that datalen in In SBs shows how many packets we are expecting. It also -+ sets up the rem field to show if how many bytes we expect in last packet -+ if it's not a full one */ -+struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen, -+ int maxlen, int mem_flags) { -+ struct USB_SB_Desc *sb_desc; -+ sb_desc = create_sb(sb_prev, TT_IN, NULL, -+ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags); -+ if(sb_desc == NULL) -+ return NULL; -+ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen); -+ return sb_desc; -+} -+ -+void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) { -+ sb_desc->command |= flags; -+} -+ -+int create_sb_for_urb(struct urb *urb, int mem_flags) { -+ int is_out = !usb_pipein(urb->pipe); -+ int type = usb_pipetype(urb->pipe); -+ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out); -+ int buf_len = urb->transfer_buffer_length; -+ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL; -+ struct USB_SB_Desc *sb_desc = NULL; -+ -+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv != NULL); -+ -+ switch(type) { -+ case PIPE_CONTROL: -+ /* Setup stage */ -+ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ set_sb_cmds(sb_desc, CMD_FULL); -+ -+ /* Attach first SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ -+ if (is_out) { /* Out Control URB */ -+ /* If this Control OUT transfer has an optional data stage we add -+ an OUT token before the mandatory IN (status) token */ -+ if ((buf_len > 0) && buf) { -+ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ -+ /* Status stage */ -+ /* The data length has to be exactly 1. This is due to a requirement -+ of the USB specification that a host must be prepared to receive -+ data in the status phase */ -+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ } else { /* In control URB */ -+ /* Data stage */ -+ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ -+ /* Status stage */ -+ /* Read comment at zout_buffer declaration for an explanation to this. */ -+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ /* Set descriptor interrupt flag for in URBs so we can finish URB after -+ zout-packet has been sent */ -+ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL); -+ } -+ /* Set end-of-list flag in last SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ /* Attach last SB to URB */ -+ urb_priv->last_sb = sb_desc; -+ break; -+ -+ case PIPE_BULK: -+ if (is_out) { /* Out Bulk URB */ -+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ /* The full field is set to yes, even if we don't actually check that -+ this is a full-length transfer (i.e., that transfer_buffer_length % -+ maxlen = 0). -+ Setting full prevents the USB controller from sending an empty packet -+ in that case. However, if URB_ZERO_PACKET was set we want that. */ -+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ } else { /* In Bulk URB */ -+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ } -+ /* Set end-of-list flag for last SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ -+ /* Attach SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ urb_priv->last_sb = sb_desc; -+ break; -+ -+ case PIPE_INTERRUPT: -+ if(is_out) { /* Out Intr URB */ -+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ -+ /* The full field is set to yes, even if we don't actually check that -+ this is a full-length transfer (i.e., that transfer_buffer_length % -+ maxlen = 0). -+ Setting full prevents the USB controller from sending an empty packet -+ in that case. However, if URB_ZERO_PACKET was set we want that. */ -+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ /* Only generate TX interrupt if it's a Out URB*/ -+ set_sb_cmds(sb_desc, CMD_INTR); -+ -+ } else { /* In Intr URB */ -+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ } -+ /* Set end-of-list flag for last SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ -+ /* Attach SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ urb_priv->last_sb = sb_desc; -+ -+ break; -+ case PIPE_ISOCHRONOUS: -+ if(is_out) { /* Out Isoc URB */ -+ int i; -+ if(urb->number_of_packets == 0) { -+ tc_err("Can't create SBs for Isoc URB with zero packets\n"); -+ return -EPIPE; -+ } -+ /* Create one SB descriptor for each packet and link them together. */ -+ for(i = 0; i < urb->number_of_packets; i++) { -+ if (urb->iso_frame_desc[i].length > 0) { -+ -+ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer + -+ urb->iso_frame_desc[i].offset, -+ urb->iso_frame_desc[i].length, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ -+ /* Check if it's a full length packet */ -+ if (urb->iso_frame_desc[i].length == -+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ -+ } else { /* zero length packet */ -+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ /* Attach first SB descriptor to URB */ -+ if (i == 0) { -+ urb_priv->first_sb = sb_desc; -+ } -+ } -+ /* Set interrupt and end-of-list flags in last SB */ -+ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL); -+ /* Attach last SB descriptor to URB */ -+ urb_priv->last_sb = sb_desc; -+ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n", -+ urb->number_of_packets, (unsigned int)urb); -+ } else { /* In Isoc URB */ -+ /* Actual number of packets is not relevant for periodic in traffic as -+ long as it is more than zero. Set to 1 always. */ -+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ /* Set end-of-list flags for SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ -+ /* Attach SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ urb_priv->last_sb = sb_desc; -+ } -+ break; -+ default: -+ tc_err("Unknown pipe-type\n"); -+ return -EPIPE; -+ break; -+ } -+ return 0; -+} -+ -+int init_intr_urb(struct urb *urb, int mem_flags) { -+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ struct USB_EP_Desc* ep_desc; -+ int interval; -+ int i; -+ int ep_count; -+ -+ ASSERT(urb_priv != NULL); -+ ASSERT(usb_pipeint(urb->pipe)); -+ /* We can't support interval longer than amount of eof descriptors in -+ TxIntrEPList */ -+ if(urb->interval > MAX_INTR_INTERVAL) { -+ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval, -+ MAX_INTR_INTERVAL); -+ return -EINVAL; -+ } -+ -+ /* We assume that the SB descriptors already have been setup */ -+ ASSERT(urb_priv->first_sb != NULL); -+ -+ /* Round of the interval to 2^n, it is obvious that this code favours -+ smaller numbers, but that is actually a good thing */ -+ /* FIXME: The "rounding error" for larger intervals will be quite -+ large. For in traffic this shouldn't be a problem since it will only -+ mean that we "poll" more often. */ -+ interval = urb->interval; -+ for (i = 0; interval; i++) { -+ interval = interval >> 1; -+ } -+ urb_priv->interval = 1 << (i - 1); -+ -+ /* We can only have max interval for Out Interrupt due to that we can only -+ handle one linked in EP for a certain epid in the Intr descr array at the -+ time. The USB Controller in the Etrax 100LX continues to process Intr EPs -+ so we have no way of knowing which one that caused the actual transfer if -+ we have several linked in. */ -+ if(usb_pipeout(urb->pipe)) { -+ urb_priv->interval = MAX_INTR_INTERVAL; -+ } -+ -+ /* Calculate amount of EPs needed */ -+ ep_count = MAX_INTR_INTERVAL / urb_priv->interval; -+ -+ for(i = 0; i < ep_count; i++) { -+ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags); -+ if(ep_desc == NULL) { -+ /* Free any descriptors that we may have allocated before failure */ -+ while(i > 0) { -+ i--; -+ kfree(urb_priv->intr_ep_pool[i]); -+ } -+ return -ENOMEM; -+ } -+ urb_priv->intr_ep_pool[i] = ep_desc; -+ } -+ urb_priv->intr_ep_pool_length = ep_count; -+ return 0; -+} -+ -+/* DMA RX/TX functions */ -+/* ----------------------- */ -+ -+static void tc_dma_init_rx_list(void) { -+ int i; -+ -+ /* Setup descriptor list except last one */ -+ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { -+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; -+ RxDescList[i].command = 0; -+ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); -+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); -+ RxDescList[i].hw_len = 0; -+ RxDescList[i].status = 0; -+ -+ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as -+ USB_IN_Desc for the relevant fields.) */ -+ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); -+ -+ } -+ /* Special handling of last descriptor */ -+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; -+ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); -+ RxDescList[i].next = virt_to_phys(&RxDescList[0]); -+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); -+ RxDescList[i].hw_len = 0; -+ RxDescList[i].status = 0; -+ -+ /* Setup list pointers that show progress in list */ -+ myNextRxDesc = &RxDescList[0]; -+ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; -+ -+ flush_etrax_cache(); -+ /* Point DMA to first descriptor in list and start it */ -+ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); -+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); -+} -+ -+ -+static void tc_dma_init_tx_bulk_list(void) { -+ int i; -+ volatile struct USB_EP_Desc *epDescr; -+ -+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -+ epDescr = &(TxBulkEPList[i]); -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]); -+ -+ /* Initiate two EPs, disabled and with the eol flag set. No need for any -+ preserved epid. */ -+ -+ /* The first one has the intr flag set so we get an interrupt when the DMA -+ channel is about to become disabled. */ -+ CHECK_ALIGN(&TxBulkDummyEPList[i][0]); -+ TxBulkDummyEPList[i][0].hw_len = 0; -+ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | -+ IO_STATE(USB_EP_command, eol, yes) | -+ IO_STATE(USB_EP_command, intr, yes)); -+ TxBulkDummyEPList[i][0].sub = 0; -+ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); -+ -+ /* The second one. */ -+ CHECK_ALIGN(&TxBulkDummyEPList[i][1]); -+ TxBulkDummyEPList[i][1].hw_len = 0; -+ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | -+ IO_STATE(USB_EP_command, eol, yes)); -+ TxBulkDummyEPList[i][1].sub = 0; -+ /* The last dummy's next pointer is the same as the current EP's next pointer. */ -+ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); -+ } -+ -+ /* Special handling of last descr in list, make list circular */ -+ epDescr = &TxBulkEPList[i]; -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | -+ IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxBulkEPList[0]); -+ -+ /* Init DMA sub-channel pointers to last item in each list */ -+ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); -+ /* No point in starting the bulk channel yet. -+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ -+} -+ -+static void tc_dma_init_tx_ctrl_list(void) { -+ int i; -+ volatile struct USB_EP_Desc *epDescr; -+ -+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -+ epDescr = &(TxCtrlEPList[i]); -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]); -+ } -+ /* Special handling of last descr in list, make list circular */ -+ epDescr = &TxCtrlEPList[i]; -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | -+ IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxCtrlEPList[0]); -+ -+ /* Init DMA sub-channel pointers to last item in each list */ -+ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]); -+ /* No point in starting the ctrl channel yet. -+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ -+} -+ -+ -+static void tc_dma_init_tx_intr_list(void) { -+ int i; -+ -+ TxIntrSB_zout.sw_len = 1; -+ TxIntrSB_zout.next = 0; -+ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); -+ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | -+ IO_STATE(USB_SB_command, tt, zout) | -+ IO_STATE(USB_SB_command, full, yes) | -+ IO_STATE(USB_SB_command, eot, yes) | -+ IO_STATE(USB_SB_command, eol, yes)); -+ -+ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { -+ CHECK_ALIGN(&TxIntrEPList[i]); -+ TxIntrEPList[i].hw_len = 0; -+ TxIntrEPList[i].command = -+ (IO_STATE(USB_EP_command, eof, yes) | -+ IO_STATE(USB_EP_command, enable, yes) | -+ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); -+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); -+ } -+ -+ /* Special handling of last descr in list, make list circular */ -+ CHECK_ALIGN(&TxIntrEPList[i]); -+ TxIntrEPList[i].hw_len = 0; -+ TxIntrEPList[i].command = -+ (IO_STATE(USB_EP_command, eof, yes) | -+ IO_STATE(USB_EP_command, eol, yes) | -+ IO_STATE(USB_EP_command, enable, yes) | -+ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); -+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); -+ -+ intr_dbg("Initiated Intr EP descriptor list\n"); -+ -+ -+ /* Connect DMA 8 sub-channel 2 to first in list */ -+ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); -+} -+ -+static void tc_dma_init_tx_isoc_list(void) { -+ int i; -+ -+ DBFENTER; -+ -+ /* Read comment at zout_buffer declaration for an explanation to this. */ -+ TxIsocSB_zout.sw_len = 1; -+ TxIsocSB_zout.next = 0; -+ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); -+ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | -+ IO_STATE(USB_SB_command, tt, zout) | -+ IO_STATE(USB_SB_command, full, yes) | -+ IO_STATE(USB_SB_command, eot, yes) | -+ IO_STATE(USB_SB_command, eol, yes)); -+ -+ /* The last isochronous EP descriptor is a dummy. */ -+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -+ CHECK_ALIGN(&TxIsocEPList[i]); -+ TxIsocEPList[i].hw_len = 0; -+ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); -+ TxIsocEPList[i].sub = 0; -+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); -+ } -+ -+ CHECK_ALIGN(&TxIsocEPList[i]); -+ TxIsocEPList[i].hw_len = 0; -+ -+ /* Must enable the last EP descr to get eof interrupt. */ -+ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | -+ IO_STATE(USB_EP_command, eof, yes) | -+ IO_STATE(USB_EP_command, eol, yes) | -+ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -+ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); -+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); -+ -+ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); -+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); -+} -+ -+static int tc_dma_init(struct usb_hcd *hcd) { -+ tc_dma_init_rx_list(); -+ tc_dma_init_tx_bulk_list(); -+ tc_dma_init_tx_ctrl_list(); -+ tc_dma_init_tx_intr_list(); -+ tc_dma_init_tx_isoc_list(); -+ -+ if (cris_request_dma(USB_TX_DMA_NBR, -+ "ETRAX 100LX built-in USB (Tx)", -+ DMA_VERBOSE_ON_ERROR, -+ dma_usb)) { -+ err("Could not allocate DMA ch 8 for USB"); -+ return -EBUSY; -+ } -+ -+ if (cris_request_dma(USB_RX_DMA_NBR, -+ "ETRAX 100LX built-in USB (Rx)", -+ DMA_VERBOSE_ON_ERROR, -+ dma_usb)) { -+ err("Could not allocate DMA ch 9 for USB"); -+ return -EBUSY; -+ } -+ -+ *R_IRQ_MASK2_SET = -+ /* Note that these interrupts are not used. */ -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | -+ /* Sub channel 1 (ctrl) descr. interrupts are used. */ -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | -+ /* Sub channel 3 (isoc) descr. interrupts are used. */ -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); -+ -+ /* Note that the dma9_descr interrupt is not used. */ -+ *R_IRQ_MASK2_SET = -+ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | -+ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); -+ -+ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0, -+ "ETRAX 100LX built-in USB (Rx)", hcd)) { -+ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); -+ return -EBUSY; -+ } -+ -+ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0, -+ "ETRAX 100LX built-in USB (Tx)", hcd)) { -+ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); -+ return -EBUSY; -+ } -+ -+ return 0; -+} -+ -+static void tc_dma_destroy(void) { -+ free_irq(ETRAX_USB_RX_IRQ, NULL); -+ free_irq(ETRAX_USB_TX_IRQ, NULL); -+ -+ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)"); -+ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)"); -+ -+} -+ -+static void tc_dma_link_intr_urb(struct urb *urb); -+ -+/* Handle processing of Bulk, Ctrl and Intr queues */ -+static void tc_dma_process_queue(int epid) { -+ struct urb *urb; -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ unsigned long flags; -+ char toggle; -+ -+ if(epid_state[epid].disabled) { -+ /* Don't process any URBs on a disabled endpoint */ -+ return; -+ } -+ -+ /* Do not disturb us while fiddling with EPs and epids */ -+ local_irq_save(flags); -+ -+ /* For bulk, Ctrl and Intr can we only have one URB active at a time for -+ a specific EP. */ -+ if(activeUrbList[epid] != NULL) { -+ /* An URB is already active on EP, skip checking queue */ -+ local_irq_restore(flags); -+ return; -+ } -+ -+ urb = urb_list_first(epid); -+ if(urb == NULL) { -+ /* No URB waiting in EP queue. Nothing do to */ -+ local_irq_restore(flags); -+ return; -+ } -+ -+ urb_priv = urb->hcpriv; -+ ASSERT(urb_priv != NULL); -+ ASSERT(urb_priv->urb_state == NOT_STARTED); -+ ASSERT(!usb_pipeisoc(urb->pipe)); -+ -+ /* Remove this URB from the queue and move it to active */ -+ activeUrbList[epid] = urb; -+ urb_list_del(urb, epid); -+ -+ urb_priv->urb_state = STARTED; -+ -+ /* Reset error counters (regardless of which direction this traffic is). */ -+ etrax_epid_clear_error(epid); -+ -+ /* Special handling of Intr EP lists */ -+ if(usb_pipeint(urb->pipe)) { -+ tc_dma_link_intr_urb(urb); -+ local_irq_restore(flags); -+ return; -+ } -+ -+ /* Software must preset the toggle bits for Bulk and Ctrl */ -+ if(usb_pipecontrol(urb->pipe)) { -+ /* Toggle bits are initialized only during setup transaction in a -+ CTRL transfer */ -+ etrax_epid_set_toggle(epid, 0, 0); -+ etrax_epid_set_toggle(epid, 1, 0); -+ } else { -+ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), -+ usb_pipeout(urb->pipe)); -+ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle); -+ } -+ -+ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n", -+ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid, -+ sblist_to_str(urb_priv->first_sb)); -+ -+ /* We start the DMA sub channel without checking if it's running or not, -+ because: -+ 1) If it's already running, issuing the start command is a nop. -+ 2) We avoid a test-and-set race condition. */ -+ switch(usb_pipetype(urb->pipe)) { -+ case PIPE_BULK: -+ /* Assert that the EP descriptor is disabled. */ -+ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); -+ -+ /* Set up and enable the EP descriptor. */ -+ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ TxBulkEPList[epid].hw_len = 0; -+ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ -+ /* Check if the dummy list is already with us (if several urbs were queued). */ -+ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) { -+ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d", -+ (unsigned long)urb, epid); -+ -+ /* We don't need to check if the DMA is at this EP or not before changing the -+ next pointer, since we will do it in one 32-bit write (EP descriptors are -+ 32-bit aligned). */ -+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); -+ } -+ -+ restart_dma8_sub0(); -+ -+ /* Update/restart the bulk start timer since we just started the channel.*/ -+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); -+ /* Update/restart the bulk eot timer since we just inserted traffic. */ -+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -+ break; -+ case PIPE_CONTROL: -+ /* Assert that the EP descriptor is disabled. */ -+ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); -+ -+ /* Set up and enable the EP descriptor. */ -+ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ TxCtrlEPList[epid].hw_len = 0; -+ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ -+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); -+ break; -+ } -+ local_irq_restore(flags); -+} -+ -+static void tc_dma_link_intr_urb(struct urb *urb) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ volatile struct USB_EP_Desc *tmp_ep; -+ struct USB_EP_Desc *ep_desc; -+ int i = 0, epid; -+ int pool_idx = 0; -+ -+ ASSERT(urb_priv != NULL); -+ epid = urb_priv->epid; -+ ASSERT(urb_priv->interval > 0); -+ ASSERT(urb_priv->intr_ep_pool_length > 0); -+ -+ tmp_ep = &TxIntrEPList[0]; -+ -+ /* Only insert one EP descriptor in list for Out Intr URBs. -+ We can only handle Out Intr with interval of 128ms because -+ it's not possible to insert several Out Intr EPs because they -+ are not consumed by the DMA. */ -+ if(usb_pipeout(urb->pipe)) { -+ ep_desc = urb_priv->intr_ep_pool[0]; -+ ASSERT(ep_desc); -+ ep_desc->next = tmp_ep->next; -+ tmp_ep->next = virt_to_phys(ep_desc); -+ i++; -+ } else { -+ /* Loop through Intr EP descriptor list and insert EP for URB at -+ specified interval */ -+ do { -+ /* Each EP descriptor with eof flag sat signals a new frame */ -+ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { -+ /* Insert a EP from URBs EP pool at correct interval */ -+ if ((i % urb_priv->interval) == 0) { -+ ep_desc = urb_priv->intr_ep_pool[pool_idx]; -+ ASSERT(ep_desc); -+ ep_desc->next = tmp_ep->next; -+ tmp_ep->next = virt_to_phys(ep_desc); -+ pool_idx++; -+ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length); -+ } -+ i++; -+ } -+ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next); -+ } while(tmp_ep != &TxIntrEPList[0]); -+ } -+ -+ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid, -+ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx); -+ -+ /* We start the DMA sub channel without checking if it's running or not, -+ because: -+ 1) If it's already running, issuing the start command is a nop. -+ 2) We avoid a test-and-set race condition. */ -+ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); -+} -+ -+static void tc_dma_process_isoc_urb(struct urb *urb) { -+ unsigned long flags; -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ int epid; -+ -+ /* Do not disturb us while fiddling with EPs and epids */ -+ local_irq_save(flags); -+ -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->first_sb); -+ epid = urb_priv->epid; -+ -+ if(activeUrbList[epid] == NULL) { -+ /* EP is idle, so make this URB active */ -+ activeUrbList[epid] = urb; -+ urb_list_del(urb, epid); -+ ASSERT(TxIsocEPList[epid].sub == 0); -+ ASSERT(!(TxIsocEPList[epid].command & -+ IO_STATE(USB_EP_command, enable, yes))); -+ -+ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/ -+ if(usb_pipein(urb->pipe)) { -+ /* Each EP for In Isoc will have only one SB descriptor, setup when -+ submitting the first active urb. We do it here by copying from URBs -+ pre-allocated SB. */ -+ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb, -+ sizeof(TxIsocSBList[epid])); -+ TxIsocEPList[epid].hw_len = 0; -+ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid])); -+ } else { -+ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */ -+ TxIsocEPList[epid].hw_len = 0; -+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ -+ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x" -+ " last_sb::0x%x\n", -+ (unsigned int)urb, urb_priv->urb_num, epid, -+ (unsigned int)(urb_priv->first_sb), -+ (unsigned int)(urb_priv->last_sb)); -+ } -+ -+ if (urb->transfer_flags & URB_ISO_ASAP) { -+ /* The isoc transfer should be started as soon as possible. The -+ start_frame field is a return value if URB_ISO_ASAP was set. Comparing -+ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN -+ token is sent 2 frames later. I'm not sure how this affects usage of -+ the start_frame field by the device driver, or how it affects things -+ when USB_ISO_ASAP is not set, so therefore there's no compensation for -+ the 2 frame "lag" here. */ -+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); -+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ urb_priv->urb_state = STARTED; -+ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n", -+ urb->start_frame); -+ } else { -+ /* Not started yet. */ -+ urb_priv->urb_state = NOT_STARTED; -+ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n", -+ (unsigned int)urb); -+ } -+ -+ } else { -+ /* An URB is already active on the EP. Leave URB in queue and let -+ finish_isoc_urb process it after current active URB */ -+ ASSERT(TxIsocEPList[epid].sub != 0); -+ -+ if(usb_pipein(urb->pipe)) { -+ /* Because there already is a active In URB on this epid we do nothing -+ and the finish_isoc_urb() function will handle switching to next URB*/ -+ -+ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */ -+ struct USB_SB_Desc *temp_sb_desc; -+ -+ /* Set state STARTED to all Out Isoc URBs added to SB list because we -+ don't know how many of them that are finished before descr interrupt*/ -+ urb_priv->urb_state = STARTED; -+ -+ /* Find end of current SB list by looking for SB with eol flag sat */ -+ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); -+ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != -+ IO_STATE(USB_SB_command, eol, yes)) { -+ ASSERT(temp_sb_desc->next); -+ temp_sb_desc = phys_to_virt(temp_sb_desc->next); -+ } -+ -+ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d" -+ " sub:0x%x eol:0x%x\n", -+ (unsigned int)urb, urb_priv->urb_num, -+ (unsigned int)(urb_priv->first_sb), -+ (unsigned int)(urb_priv->last_sb), epid, -+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), -+ (unsigned int)temp_sb_desc); -+ -+ /* Next pointer must be set before eol is removed. */ -+ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); -+ /* Clear the previous end of list flag since there is a new in the -+ added SB descriptor list. */ -+ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); -+ -+ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { -+ __u32 epid_data; -+ /* 8.8.5 in Designer's Reference says we should check for and correct -+ any errors in the EP here. That should not be necessary if -+ epid_attn is handled correctly, so we assume all is ok. */ -+ epid_data = etrax_epid_iso_get(epid); -+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) != -+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending" -+ " URB:0x%x[%d]\n", -+ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid, -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ -+ /* The SB list was exhausted. */ -+ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { -+ /* The new sublist did not get processed before the EP was -+ disabled. Setup the EP again. */ -+ -+ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) { -+ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted" -+ ", restarting from this URBs SB:0x%x\n", -+ epid, (unsigned int)temp_sb_desc, -+ (unsigned int)(urb_priv->first_sb)); -+ TxIsocEPList[epid].hw_len = 0; -+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); -+ /* Enable the EP again so data gets processed this time */ -+ TxIsocEPList[epid].command |= -+ IO_STATE(USB_EP_command, enable, yes); -+ -+ } else { -+ /* The EP has been disabled but not at end this URB (god knows -+ where). This should generate an epid_attn so we should not be -+ here */ -+ isoc_warn("EP was disabled on sb:0x%x before SB list for" -+ " URB:0x%x[%d] got processed\n", -+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ } else { -+ /* This might happend if we are slow on this function and isn't -+ an error. */ -+ isoc_dbg("EP was disabled and finished with SBs from appended" -+ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num); -+ } -+ } -+ } -+ } -+ -+ /* Start the DMA sub channel */ -+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); -+ -+ local_irq_restore(flags); -+} -+ -+static void tc_dma_unlink_intr_urb(struct urb *urb) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ -+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ -+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ -+ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from -+ the list. */ -+ int count = 0; -+ volatile int timeout = 10000; -+ int epid; -+ -+ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the -+ List". */ -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->intr_ep_pool_length > 0); -+ epid = urb_priv->epid; -+ -+ /* First disable all Intr EPs belonging to epid for this URB */ -+ first_ep = &TxIntrEPList[0]; -+ curr_ep = first_ep; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -+ /* Disable EP */ -+ next_ep->command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != first_ep); -+ -+ -+ /* Now unlink all EPs belonging to this epid from Descr list */ -+ first_ep = &TxIntrEPList[0]; -+ curr_ep = first_ep; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -+ /* This is the one we should unlink. */ -+ unlink_ep = next_ep; -+ -+ /* Actually unlink the EP from the DMA list. */ -+ curr_ep->next = unlink_ep->next; -+ -+ /* Wait until the DMA is no longer at this descriptor. */ -+ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n"); -+ } -+ -+ count++; -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != first_ep); -+ -+ if(count != urb_priv->intr_ep_pool_length) { -+ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count, -+ urb_priv->intr_ep_pool_length, (unsigned int)urb, -+ urb_priv->urb_num); -+ } else { -+ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count, -+ urb_priv->intr_ep_pool_length, (unsigned int)urb); -+ } -+} -+ -+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, -+ int timer) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ __u32 epid_data; -+ -+ /* Protect TxEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ /* A finished EP descriptor is disabled and has a valid sub pointer */ -+ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && -+ (TxBulkEPList[epid].sub != 0)) { -+ -+ /* Get the active URB for this epid */ -+ urb = activeUrbList[epid]; -+ /* Sanity checks */ -+ ASSERT(urb); -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ /* Only handle finished out Bulk EPs here, -+ and let RX interrupt take care of the rest */ -+ if(!epid_out_traffic(epid)) { -+ continue; -+ } -+ -+ if(timer) { -+ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n", -+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, -+ urb_priv->urb_num); -+ } else { -+ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n", -+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, -+ urb_priv->urb_num); -+ } -+ -+ if(urb_priv->urb_state == UNLINK) { -+ /* This Bulk URB is requested to be unlinked, that means that the EP -+ has been disabled and we might not have sent all data */ -+ tc_finish_urb(hcd, urb, urb->status); -+ continue; -+ } -+ -+ ASSERT(urb_priv->urb_state == STARTED); -+ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { -+ tc_err("Endpoint got disabled before reaching last sb\n"); -+ } -+ -+ epid_data = etrax_epid_get(epid); -+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == -+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ /* This means that the endpoint has no error, is disabled -+ and had inserted traffic, i.e. transfer successfully completed. */ -+ tc_finish_urb(hcd, urb, 0); -+ } else { -+ /* Shouldn't happen. We expect errors to be caught by epid -+ attention. */ -+ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n", -+ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); -+ } -+ } else { -+ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid); -+ } -+ } -+ -+ local_irq_restore(flags); -+} -+ -+static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ __u32 epid_data; -+ -+ /* Protect TxEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if(epid == DUMMY_EPID) -+ continue; -+ -+ /* A finished EP descriptor is disabled and has a valid sub pointer */ -+ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) && -+ (TxCtrlEPList[epid].sub != 0)) { -+ -+ /* Get the active URB for this epid */ -+ urb = activeUrbList[epid]; -+ -+ if(urb == NULL) { -+ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid); -+ continue; -+ } -+ -+ /* Sanity checks */ -+ ASSERT(usb_pipein(urb->pipe)); -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) { -+ tc_err("Endpoint got disabled before reaching last sb\n"); -+ } -+ -+ epid_data = etrax_epid_get(epid); -+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == -+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ /* This means that the endpoint has no error, is disabled -+ and had inserted traffic, i.e. transfer successfully completed. */ -+ -+ /* Check if RX-interrupt for In Ctrl has been processed before -+ finishing the URB */ -+ if(urb_priv->ctrl_rx_done) { -+ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n", -+ (unsigned int)urb, urb_priv->urb_num); -+ tc_finish_urb(hcd, urb, 0); -+ } else { -+ /* If we get zout descriptor interrupt before RX was done for a -+ In Ctrl transfer, then we flag that and it will be finished -+ in the RX-Interrupt */ -+ urb_priv->ctrl_zout_done = 1; -+ tc_dbg("Got zout descr interrupt before RX interrupt\n"); -+ } -+ } else { -+ /* Shouldn't happen. We expect errors to be caught by epid -+ attention. */ -+ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); -+ __dump_ep_desc(&(TxCtrlEPList[epid])); -+ __dump_ept_data(epid); -+ } -+ } -+ } -+ local_irq_restore(flags); -+} -+ -+/* This function goes through all epids that are setup for Out Isoc transfers -+ and marks (isoc_out_done) all queued URBs that the DMA has finished -+ transfer for. -+ No URB completetion is done here to make interrupt routine return quickly. -+ URBs are completed later with help of complete_isoc_bottom_half() that -+ becomes schedules when this functions is finished. */ -+static void check_finished_isoc_tx_epids(void) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ struct USB_SB_Desc* sb_desc; -+ int epid_done; -+ -+ /* Protect TxIsocEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID || -+ !epid_out_traffic(epid)) { -+ /* Nothing here to see. */ -+ continue; -+ } -+ ASSERT(epid_inuse(epid)); -+ ASSERT(epid_isoc(epid)); -+ -+ sb_desc = phys_to_virt(TxIsocEPList[epid].sub); -+ /* Find the last descriptor of the currently active URB for this ep. -+ This is the first descriptor in the sub list marked for a descriptor -+ interrupt. */ -+ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { -+ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; -+ } -+ ASSERT(sb_desc); -+ -+ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n", -+ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), -+ (unsigned int)sb_desc); -+ -+ urb = activeUrbList[epid]; -+ if(urb == NULL) { -+ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid); -+ continue; -+ } -+ -+ epid_done = 0; -+ while(urb && !epid_done) { -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -+ ASSERT(usb_pipeout(urb->pipe)); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->urb_state == STARTED || -+ urb_priv->urb_state == UNLINK); -+ -+ if (sb_desc != urb_priv->last_sb) { -+ /* This urb has been sent. */ -+ urb_priv->isoc_out_done = 1; -+ -+ } else { /* Found URB that has last_sb as the interrupt reason */ -+ -+ /* Check if EP has been disabled, meaning that all transfers are done*/ -+ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { -+ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) == -+ IO_STATE(USB_SB_command, eol, yes)); -+ ASSERT(sb_desc->next == 0); -+ urb_priv->isoc_out_done = 1; -+ } else { -+ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n", -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ /* Stop looking any further in queue */ -+ epid_done = 1; -+ } -+ -+ if (!epid_done) { -+ if(urb == activeUrbList[epid]) { -+ urb = urb_list_first(epid); -+ } else { -+ urb = urb_list_next(urb, epid); -+ } -+ } -+ } /* END: while(urb && !epid_done) */ -+ } -+ -+ local_irq_restore(flags); -+} -+ -+ -+/* This is where the Out Isoc URBs are realy completed. This function is -+ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers -+ are done. This functions completes all URBs earlier marked with -+ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */ -+ -+static void complete_isoc_bottom_half(void *data) { -+ struct crisv10_isoc_complete_data *comp_data; -+ struct usb_iso_packet_descriptor *packet; -+ struct crisv10_urb_priv * urb_priv; -+ unsigned long flags; -+ struct urb* urb; -+ int epid_done; -+ int epid; -+ int i; -+ -+ comp_data = (struct crisv10_isoc_complete_data*)data; -+ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -+ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) { -+ /* Only check valid Out Isoc epids */ -+ continue; -+ } -+ -+ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid, -+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub)); -+ -+ /* The descriptor interrupt handler has marked all transmitted Out Isoc -+ URBs with isoc_out_done. Now we traverse all epids and for all that -+ have out Isoc traffic we traverse its URB list and complete the -+ transmitted URBs. */ -+ epid_done = 0; -+ while (!epid_done) { -+ -+ /* Get the active urb (if any) */ -+ urb = activeUrbList[epid]; -+ if (urb == 0) { -+ isoc_dbg("No active URB on epid:%d anymore\n", epid); -+ epid_done = 1; -+ continue; -+ } -+ -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -+ ASSERT(usb_pipeout(urb->pipe)); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ if (!(urb_priv->isoc_out_done)) { -+ /* We have reached URB that isn't flaged done yet, stop traversing. */ -+ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d" -+ " before not yet flaged URB:0x%x[%d]\n", -+ epid, (unsigned int)urb, urb_priv->urb_num); -+ epid_done = 1; -+ continue; -+ } -+ -+ /* This urb has been sent. */ -+ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n", -+ (unsigned int)urb, urb_priv->urb_num); -+ -+ /* Set ok on transfered packets for this URB and finish it */ -+ for (i = 0; i < urb->number_of_packets; i++) { -+ packet = &urb->iso_frame_desc[i]; -+ packet->status = 0; -+ packet->actual_length = packet->length; -+ } -+ urb_priv->isoc_packet_counter = urb->number_of_packets; -+ tc_finish_urb(comp_data->hcd, urb, 0); -+ -+ } /* END: while(!epid_done) */ -+ } /* END: for(epid...) */ -+ -+ local_irq_restore(flags); -+ kmem_cache_free(isoc_compl_cache, comp_data); -+} -+ -+ -+static void check_finished_intr_tx_epids(struct usb_hcd *hcd) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ -+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ -+ -+ /* Protect TxintrEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) { -+ /* Nothing to see on this epid. Only check valid Out Intr epids */ -+ continue; -+ } -+ -+ urb = activeUrbList[epid]; -+ if(urb == 0) { -+ intr_warn("Found Out Intr epid:%d with no active URB\n", epid); -+ continue; -+ } -+ -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT); -+ ASSERT(usb_pipeout(urb->pipe)); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs -+ are inserted.*/ -+ curr_ep = &TxIntrEPList[0]; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if(next_ep == urb_priv->intr_ep_pool[0]) { -+ /* We found the Out Intr EP for this epid */ -+ -+ /* Disable it so it doesn't get processed again */ -+ next_ep->command &= ~IO_MASK(USB_EP_command, enable); -+ -+ /* Finish the active Out Intr URB with status OK */ -+ tc_finish_urb(hcd, urb, 0); -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != &TxIntrEPList[1]); -+ -+ } -+ local_irq_restore(flags); -+} -+ -+/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */ -+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) { -+ struct usb_hcd *hcd = (struct usb_hcd*)vhc; -+ ASSERT(hcd); -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); -+ restart_dma8_sub0(); -+ } -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); -+ check_finished_ctrl_tx_epids(hcd); -+ } -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); -+ check_finished_intr_tx_epids(hcd); -+ } -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { -+ struct crisv10_isoc_complete_data* comp_data; -+ -+ /* Flag done Out Isoc for later completion */ -+ check_finished_isoc_tx_epids(); -+ -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); -+ /* Schedule bottom half of Out Isoc completion function. This function -+ finishes the URBs marked with isoc_out_done */ -+ comp_data = (struct crisv10_isoc_complete_data*) -+ kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC); -+ ASSERT(comp_data != NULL); -+ comp_data ->hcd = hcd; -+ -+ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data); -+ schedule_work(&comp_data->usb_bh); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */ -+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) { -+ unsigned long flags; -+ struct urb *urb; -+ struct usb_hcd *hcd = (struct usb_hcd*)vhc; -+ struct crisv10_urb_priv *urb_priv; -+ int epid = 0; -+ int real_error; -+ -+ ASSERT(hcd); -+ -+ /* Clear this interrupt. */ -+ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); -+ -+ /* Custom clear interrupt for this interrupt */ -+ /* The reason we cli here is that we call the driver's callback functions. */ -+ local_irq_save(flags); -+ -+ /* Note that this while loop assumes that all packets span only -+ one rx descriptor. */ -+ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { -+ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); -+ /* Get the active URB for this epid */ -+ urb = activeUrbList[epid]; -+ -+ ASSERT(epid_inuse(epid)); -+ if (!urb) { -+ dma_err("No urb for epid %d in rx interrupt\n", epid); -+ goto skip_out; -+ } -+ -+ /* Check if any errors on epid */ -+ real_error = 0; -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { -+ __u32 r_usb_ept_data; -+ -+ if (usb_pipeisoc(urb->pipe)) { -+ r_usb_ept_data = etrax_epid_iso_get(epid); -+ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && -+ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && -+ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { -+ /* Not an error, just a failure to receive an expected iso -+ in packet in this frame. This is not documented -+ in the designers reference. Continue processing. -+ */ -+ } else real_error = 1; -+ } else real_error = 1; -+ } -+ -+ if(real_error) { -+ dma_err("Error in RX descr on epid:%d for URB 0x%x", -+ epid, (unsigned int)urb); -+ dump_ept_data(epid); -+ dump_in_desc(myNextRxDesc); -+ goto skip_out; -+ } -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->urb_state == STARTED || -+ urb_priv->urb_state == UNLINK); -+ -+ if ((usb_pipetype(urb->pipe) == PIPE_BULK) || -+ (usb_pipetype(urb->pipe) == PIPE_CONTROL) || -+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { -+ -+ /* We get nodata for empty data transactions, and the rx descriptor's -+ hw_len field is not valid in that case. No data to copy in other -+ words. */ -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { -+ /* No data to copy */ -+ } else { -+ /* -+ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n", -+ (unsigned int)urb, epid, myNextRxDesc->hw_len, -+ urb_priv->rx_offset); -+ */ -+ /* Only copy data if URB isn't flaged to be unlinked*/ -+ if(urb_priv->urb_state != UNLINK) { -+ /* Make sure the data fits in the buffer. */ -+ if(urb_priv->rx_offset + myNextRxDesc->hw_len -+ <= urb->transfer_buffer_length) { -+ -+ /* Copy the data to URBs buffer */ -+ memcpy(urb->transfer_buffer + urb_priv->rx_offset, -+ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); -+ urb_priv->rx_offset += myNextRxDesc->hw_len; -+ } else { -+ /* Signal overflow when returning URB */ -+ urb->status = -EOVERFLOW; -+ tc_finish_urb_later(hcd, urb, urb->status); -+ } -+ } -+ } -+ -+ /* Check if it was the last packet in the transfer */ -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { -+ /* Special handling for In Ctrl URBs. */ -+ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) && -+ !(urb_priv->ctrl_zout_done)) { -+ /* Flag that RX part of Ctrl transfer is done. Because zout descr -+ interrupt hasn't happend yet will the URB be finished in the -+ TX-Interrupt. */ -+ urb_priv->ctrl_rx_done = 1; -+ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting" -+ " for zout\n", (unsigned int)urb); -+ } else { -+ tc_finish_urb(hcd, urb, 0); -+ } -+ } -+ } else { /* ISOC RX */ -+ /* -+ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n", -+ epid, (unsigned int)urb); -+ */ -+ -+ struct usb_iso_packet_descriptor *packet; -+ -+ if (urb_priv->urb_state == UNLINK) { -+ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n"); -+ goto skip_out; -+ } else if (urb_priv->urb_state == NOT_STARTED) { -+ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n"); -+ goto skip_out; -+ } -+ -+ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; -+ ASSERT(packet); -+ packet->status = 0; -+ -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { -+ /* We get nodata for empty data transactions, and the rx descriptor's -+ hw_len field is not valid in that case. We copy 0 bytes however to -+ stay in synch. */ -+ packet->actual_length = 0; -+ } else { -+ packet->actual_length = myNextRxDesc->hw_len; -+ /* Make sure the data fits in the buffer. */ -+ ASSERT(packet->actual_length <= packet->length); -+ memcpy(urb->transfer_buffer + packet->offset, -+ phys_to_virt(myNextRxDesc->buf), packet->actual_length); -+ if(packet->actual_length > 0) -+ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n", -+ packet->actual_length, urb_priv->isoc_packet_counter, -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ -+ /* Increment the packet counter. */ -+ urb_priv->isoc_packet_counter++; -+ -+ /* Note that we don't care about the eot field in the rx descriptor's -+ status. It will always be set for isoc traffic. */ -+ if (urb->number_of_packets == urb_priv->isoc_packet_counter) { -+ /* Complete the urb with status OK. */ -+ tc_finish_urb(hcd, urb, 0); -+ } -+ } -+ -+ skip_out: -+ myNextRxDesc->status = 0; -+ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol); -+ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); -+ myLastRxDesc = myNextRxDesc; -+ myNextRxDesc = phys_to_virt(myNextRxDesc->next); -+ flush_etrax_cache(); -+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart); -+ } -+ -+ local_irq_restore(flags); -+ -+ return IRQ_HANDLED; -+} -+ -+static void tc_bulk_start_timer_func(unsigned long dummy) { -+ /* We might enable an EP descriptor behind the current DMA position when -+ it's about to decide that there are no more bulk traffic and it should -+ stop the bulk channel. -+ Therefore we periodically check if the bulk channel is stopped and there -+ is an enabled bulk EP descriptor, in which case we start the bulk -+ channel. */ -+ -+ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { -+ int epid; -+ -+ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n"); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n", -+ epid); -+ restart_dma8_sub0(); -+ -+ /* Restart the bulk eot timer since we just started the bulk channel.*/ -+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -+ -+ /* No need to search any further. */ -+ break; -+ } -+ } -+ } else { -+ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n"); -+ } -+} -+ -+static void tc_bulk_eot_timer_func(unsigned long dummy) { -+ struct usb_hcd *hcd = (struct usb_hcd*)dummy; -+ ASSERT(hcd); -+ /* Because of a race condition in the top half, we might miss a bulk eot. -+ This timer "simulates" a bulk eot if we don't get one for a while, -+ hopefully correcting the situation. */ -+ timer_dbg("bulk_eot_timer timed out.\n"); -+ check_finished_bulk_tx_epids(hcd, 1); -+} -+ -+ -+/*************************************************************/ -+/*************************************************************/ -+/* Device driver block */ -+/*************************************************************/ -+/*************************************************************/ -+ -+/* Forward declarations for device driver functions */ -+static int devdrv_hcd_probe(struct device *); -+static int devdrv_hcd_remove(struct device *); -+#ifdef CONFIG_PM -+static int devdrv_hcd_suspend(struct device *, u32, u32); -+static int devdrv_hcd_resume(struct device *, u32); -+#endif /* CONFIG_PM */ -+ -+/* the device */ -+static struct platform_device *devdrv_hc_platform_device; -+ -+/* device driver interface */ -+static struct device_driver devdrv_hc_device_driver = { -+ .name = (char *) hc_name, -+ .bus = &platform_bus_type, -+ -+ .probe = devdrv_hcd_probe, -+ .remove = devdrv_hcd_remove, -+ -+#ifdef CONFIG_PM -+ .suspend = devdrv_hcd_suspend, -+ .resume = devdrv_hcd_resume, -+#endif /* CONFIG_PM */ -+}; -+ -+/* initialize the host controller and driver */ -+static int __init_or_module devdrv_hcd_probe(struct device *dev) -+{ -+ struct usb_hcd *hcd; -+ struct crisv10_hcd *crisv10_hcd; -+ int retval; -+ -+ /* Check DMA burst length */ -+ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) != -+ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) { -+ devdrv_err("Invalid DMA burst length in Etrax 100LX," -+ " needs to be 32\n"); -+ return -EPERM; -+ } -+ -+ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id); -+ if (!hcd) -+ return -ENOMEM; -+ -+ crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ spin_lock_init(&crisv10_hcd->lock); -+ crisv10_hcd->num_ports = num_ports(); -+ crisv10_hcd->running = 0; -+ -+ dev_set_drvdata(dev, crisv10_hcd); -+ -+ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ, -+ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ); -+ -+ /* Print out chip version read from registers */ -+ int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major); -+ int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor); -+ if(rev_min == 0) { -+ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj); -+ } else { -+ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min); -+ } -+ -+ devdrv_info("Bulk timer interval, start:%d eot:%d\n", -+ BULK_START_TIMER_INTERVAL, -+ BULK_EOT_TIMER_INTERVAL); -+ -+ -+ /* Init root hub data structures */ -+ if(rh_init()) { -+ devdrv_err("Failed init data for Root Hub\n"); -+ retval = -ENOMEM; -+ } -+ -+ if(port_in_use(0)) { -+ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) { -+ printk(KERN_CRIT "usb-host: request IO interface usb1 failed"); -+ retval = -EBUSY; -+ goto out; -+ } -+ devdrv_info("Claimed interface for USB physical port 1\n"); -+ } -+ if(port_in_use(1)) { -+ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) { -+ /* Free first interface if second failed to be claimed */ -+ if(port_in_use(0)) { -+ cris_free_io_interface(if_usb_1); -+ } -+ printk(KERN_CRIT "usb-host: request IO interface usb2 failed"); -+ retval = -EBUSY; -+ goto out; -+ } -+ devdrv_info("Claimed interface for USB physical port 2\n"); -+ } -+ -+ /* Init transfer controller structs and locks */ -+ if((retval = tc_init(hcd)) != 0) { -+ goto out; -+ } -+ -+ /* Attach interrupt functions for DMA and init DMA controller */ -+ if((retval = tc_dma_init(hcd)) != 0) { -+ goto out; -+ } -+ -+ /* Attach the top IRQ handler for USB controller interrupts */ -+ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0, -+ "ETRAX 100LX built-in USB (HC)", hcd)) { -+ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); -+ retval = -EBUSY; -+ goto out; -+ } -+ -+ /* iso_eof is only enabled when isoc traffic is running. */ -+ *R_USB_IRQ_MASK_SET = -+ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */ -+ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | -+ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | -+ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | -+ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); -+ -+ -+ crisv10_ready_wait(); -+ /* Reset the USB interface. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); -+ -+ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to -+ 0x2A30 (10800), to guarantee that control traffic gets 10% of the -+ bandwidth, and periodic transfer may allocate the rest (90%). -+ This doesn't work though. -+ The value 11960 is chosen to be just after the SOF token, with a couple -+ of bit times extra for possible bit stuffing. */ -+ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); -+ -+ crisv10_ready_wait(); -+ /* Configure the USB interface as a host controller. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); -+ -+ -+ /* Check so controller not busy before enabling ports */ -+ crisv10_ready_wait(); -+ -+ /* Enable selected USB ports */ -+ if(port_in_use(0)) { -+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); -+ } else { -+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); -+ } -+ if(port_in_use(1)) { -+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); -+ } else { -+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); -+ } -+ -+ crisv10_ready_wait(); -+ /* Start processing of USB traffic. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -+ -+ /* Do not continue probing initialization before USB interface is done */ -+ crisv10_ready_wait(); -+ -+ /* Register our Host Controller to USB Core -+ * Finish the remaining parts of generic HCD initialization: allocate the -+ * buffers of consistent memory, register the bus -+ * and call the driver's reset() and start() routines. */ -+ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED); -+ if (retval != 0) { -+ devdrv_err("Failed registering HCD driver\n"); -+ goto out; -+ } -+ -+ return 0; -+ -+ out: -+ devdrv_hcd_remove(dev); -+ return retval; -+} -+ -+ -+/* cleanup after the host controller and driver */ -+static int __init_or_module devdrv_hcd_remove(struct device *dev) -+{ -+ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev); -+ struct usb_hcd *hcd; -+ -+ if (!crisv10_hcd) -+ return 0; -+ hcd = crisv10_hcd_to_hcd(crisv10_hcd); -+ -+ -+ /* Stop USB Controller in Etrax 100LX */ -+ crisv10_hcd_reset(hcd); -+ -+ usb_remove_hcd(hcd); -+ devdrv_dbg("Removed HCD from USB Core\n"); -+ -+ /* Free USB Controller IRQ */ -+ free_irq(ETRAX_USB_HC_IRQ, NULL); -+ -+ /* Free resources */ -+ tc_dma_destroy(); -+ tc_destroy(); -+ -+ -+ if(port_in_use(0)) { -+ cris_free_io_interface(if_usb_1); -+ } -+ if(port_in_use(1)) { -+ cris_free_io_interface(if_usb_2); -+ } -+ -+ devdrv_dbg("Freed all claimed resources\n"); -+ -+ return 0; -+} -+ -+ -+#ifdef CONFIG_PM -+ -+static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level) -+{ -+ return 0; /* no-op for now */ -+} -+ -+static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level) -+{ -+ return 0; /* no-op for now */ -+} -+ -+#endif /* CONFIG_PM */ -+ -+ -+ -+/*************************************************************/ -+/*************************************************************/ -+/* Module block */ -+/*************************************************************/ -+/*************************************************************/ -+ -+/* register driver */ -+static int __init module_hcd_init(void) -+{ -+ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ /* Here we select enabled ports by following defines created from -+ menuconfig */ -+#ifndef CONFIG_ETRAX_USB_HOST_PORT1 -+ ports &= ~(1<<0); -+#endif -+#ifndef CONFIG_ETRAX_USB_HOST_PORT2 -+ ports &= ~(1<<1); -+#endif -+ -+ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc); -+ -+ devdrv_hc_platform_device = -+ platform_device_register_simple((char *) hc_name, 0, NULL, 0); -+ -+ if (IS_ERR(devdrv_hc_platform_device)) -+ return PTR_ERR(devdrv_hc_platform_device); -+ return driver_register(&devdrv_hc_device_driver); -+ /* -+ * Note that we do not set the DMA mask for the device, -+ * i.e. we pretend that we will use PIO, since no specific -+ * allocation routines are needed for DMA buffers. This will -+ * cause the HCD buffer allocation routines to fall back to -+ * kmalloc(). -+ */ -+} -+ -+/* unregister driver */ -+static void __exit module_hcd_exit(void) -+{ -+ driver_unregister(&devdrv_hc_device_driver); -+} -+ -+ -+/* Module hooks */ -+module_init(module_hcd_init); -+module_exit(module_hcd_exit); ---- linux-2.6.19.2.orig/drivers/usb/host/hc_crisv10.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/usb/host/hc_crisv10.h 1970-01-01 01:00:00.000000000 +0100 -@@ -1,289 +0,0 @@ --#ifndef __LINUX_ETRAX_USB_H --#define __LINUX_ETRAX_USB_H -- --#include --#include -- --typedef struct USB_IN_Desc { -- volatile __u16 sw_len; -- volatile __u16 command; -- volatile unsigned long next; -- volatile unsigned long buf; -- volatile __u16 hw_len; -- volatile __u16 status; --} USB_IN_Desc_t; -- --typedef struct USB_SB_Desc { -- volatile __u16 sw_len; -- volatile __u16 command; -- volatile unsigned long next; -- volatile unsigned long buf; -- __u32 dummy; --} USB_SB_Desc_t; -- --typedef struct USB_EP_Desc { -- volatile __u16 hw_len; -- volatile __u16 command; -- volatile unsigned long sub; -- volatile unsigned long next; -- __u32 dummy; --} USB_EP_Desc_t; -- --struct virt_root_hub { -- int devnum; -- void *urb; -- void *int_addr; -- int send; -- int interval; -- int numports; -- struct timer_list rh_int_timer; -- volatile __u16 wPortChange_1; -- volatile __u16 wPortChange_2; -- volatile __u16 prev_wPortStatus_1; -- volatile __u16 prev_wPortStatus_2; --}; -- --struct etrax_usb_intr_traffic { -- int sleeping; -- int error; -- struct wait_queue *wq; --}; -- --typedef struct etrax_usb_hc { -- struct usb_bus *bus; -- struct virt_root_hub rh; -- struct etrax_usb_intr_traffic intr; --} etrax_hc_t; -- --typedef enum { -- STARTED, -- NOT_STARTED, -- UNLINK, -- TRANSFER_DONE, -- WAITING_FOR_DESCR_INTR --} etrax_usb_urb_state_t; -- -- -- --typedef struct etrax_usb_urb_priv { -- /* The first_sb field is used for freeing all SB descriptors belonging -- to an urb. The corresponding ep descriptor's sub pointer cannot be -- used for this since the DMA advances the sub pointer as it processes -- the sb list. */ -- USB_SB_Desc_t *first_sb; -- /* The last_sb field referes to the last SB descriptor that belongs to -- this urb. This is important to know so we can free the SB descriptors -- that ranges between first_sb and last_sb. */ -- USB_SB_Desc_t *last_sb; -- -- /* The rx_offset field is used in ctrl and bulk traffic to keep track -- of the offset in the urb's transfer_buffer where incoming data should be -- copied to. */ -- __u32 rx_offset; -- -- /* Counter used in isochronous transfers to keep track of the -- number of packets received/transmitted. */ -- __u32 isoc_packet_counter; -- -- /* This field is used to pass information about the urb's current state between -- the various interrupt handlers (thus marked volatile). */ -- volatile etrax_usb_urb_state_t urb_state; -- -- /* Connection between the submitted urb and ETRAX epid number */ -- __u8 epid; -- -- /* The rx_data_list field is used for periodic traffic, to hold -- received data for later processing in the the complete_urb functions, -- where the data us copied to the urb's transfer_buffer. Basically, we -- use this intermediate storage because we don't know when it's safe to -- reuse the transfer_buffer (FIXME?). */ -- struct list_head rx_data_list; --} etrax_urb_priv_t; -- --/* This struct is for passing data from the top half to the bottom half. */ --typedef struct usb_interrupt_registers --{ -- etrax_hc_t *hc; -- __u32 r_usb_epid_attn; -- __u8 r_usb_status; -- __u16 r_usb_rh_port_status_1; -- __u16 r_usb_rh_port_status_2; -- __u32 r_usb_irq_mask_read; -- __u32 r_usb_fm_number; -- struct work_struct usb_bh; --} usb_interrupt_registers_t; -- --/* This struct is for passing data from the isoc top half to the isoc bottom half. */ --typedef struct usb_isoc_complete_data --{ -- struct urb *urb; -- struct work_struct usb_bh; --} usb_isoc_complete_data_t; -- --/* This struct holds data we get from the rx descriptors for DMA channel 9 -- for periodic traffic (intr and isoc). */ --typedef struct rx_data --{ -- void *data; -- int length; -- struct list_head list; --} rx_data_t; -- --typedef struct urb_entry --{ -- struct urb *urb; -- struct list_head list; --} urb_entry_t; -- --/* --------------------------------------------------------------------------- -- Virtual Root HUB -- ------------------------------------------------------------------------- */ --/* destination of request */ --#define RH_INTERFACE 0x01 --#define RH_ENDPOINT 0x02 --#define RH_OTHER 0x03 -- --#define RH_CLASS 0x20 --#define RH_VENDOR 0x40 -- --/* Requests: bRequest << 8 | bmRequestType */ --#define RH_GET_STATUS 0x0080 --#define RH_CLEAR_FEATURE 0x0100 --#define RH_SET_FEATURE 0x0300 --#define RH_SET_ADDRESS 0x0500 --#define RH_GET_DESCRIPTOR 0x0680 --#define RH_SET_DESCRIPTOR 0x0700 --#define RH_GET_CONFIGURATION 0x0880 --#define RH_SET_CONFIGURATION 0x0900 --#define RH_GET_STATE 0x0280 --#define RH_GET_INTERFACE 0x0A80 --#define RH_SET_INTERFACE 0x0B00 --#define RH_SYNC_FRAME 0x0C80 --/* Our Vendor Specific Request */ --#define RH_SET_EP 0x2000 -- -- --/* Hub port features */ --#define RH_PORT_CONNECTION 0x00 --#define RH_PORT_ENABLE 0x01 --#define RH_PORT_SUSPEND 0x02 --#define RH_PORT_OVER_CURRENT 0x03 --#define RH_PORT_RESET 0x04 --#define RH_PORT_POWER 0x08 --#define RH_PORT_LOW_SPEED 0x09 --#define RH_C_PORT_CONNECTION 0x10 --#define RH_C_PORT_ENABLE 0x11 --#define RH_C_PORT_SUSPEND 0x12 --#define RH_C_PORT_OVER_CURRENT 0x13 --#define RH_C_PORT_RESET 0x14 -- --/* Hub features */ --#define RH_C_HUB_LOCAL_POWER 0x00 --#define RH_C_HUB_OVER_CURRENT 0x01 -- --#define RH_DEVICE_REMOTE_WAKEUP 0x00 --#define RH_ENDPOINT_STALL 0x01 -- --/* Our Vendor Specific feature */ --#define RH_REMOVE_EP 0x00 -- -- --#define RH_ACK 0x01 --#define RH_REQ_ERR -1 --#define RH_NACK 0x00 -- --/* Field definitions for */ -- --#define USB_IN_command__eol__BITNR 0 /* command macros */ --#define USB_IN_command__eol__WIDTH 1 --#define USB_IN_command__eol__no 0 --#define USB_IN_command__eol__yes 1 -- --#define USB_IN_command__intr__BITNR 3 --#define USB_IN_command__intr__WIDTH 1 --#define USB_IN_command__intr__no 0 --#define USB_IN_command__intr__yes 1 -- --#define USB_IN_status__eop__BITNR 1 /* status macros. */ --#define USB_IN_status__eop__WIDTH 1 --#define USB_IN_status__eop__no 0 --#define USB_IN_status__eop__yes 1 -- --#define USB_IN_status__eot__BITNR 5 --#define USB_IN_status__eot__WIDTH 1 --#define USB_IN_status__eot__no 0 --#define USB_IN_status__eot__yes 1 -- --#define USB_IN_status__error__BITNR 6 --#define USB_IN_status__error__WIDTH 1 --#define USB_IN_status__error__no 0 --#define USB_IN_status__error__yes 1 -- --#define USB_IN_status__nodata__BITNR 7 --#define USB_IN_status__nodata__WIDTH 1 --#define USB_IN_status__nodata__no 0 --#define USB_IN_status__nodata__yes 1 -- --#define USB_IN_status__epid__BITNR 8 --#define USB_IN_status__epid__WIDTH 5 -- --#define USB_EP_command__eol__BITNR 0 --#define USB_EP_command__eol__WIDTH 1 --#define USB_EP_command__eol__no 0 --#define USB_EP_command__eol__yes 1 -- --#define USB_EP_command__eof__BITNR 1 --#define USB_EP_command__eof__WIDTH 1 --#define USB_EP_command__eof__no 0 --#define USB_EP_command__eof__yes 1 -- --#define USB_EP_command__intr__BITNR 3 --#define USB_EP_command__intr__WIDTH 1 --#define USB_EP_command__intr__no 0 --#define USB_EP_command__intr__yes 1 -- --#define USB_EP_command__enable__BITNR 4 --#define USB_EP_command__enable__WIDTH 1 --#define USB_EP_command__enable__no 0 --#define USB_EP_command__enable__yes 1 -- --#define USB_EP_command__hw_valid__BITNR 5 --#define USB_EP_command__hw_valid__WIDTH 1 --#define USB_EP_command__hw_valid__no 0 --#define USB_EP_command__hw_valid__yes 1 -- --#define USB_EP_command__epid__BITNR 8 --#define USB_EP_command__epid__WIDTH 5 -- --#define USB_SB_command__eol__BITNR 0 /* command macros. */ --#define USB_SB_command__eol__WIDTH 1 --#define USB_SB_command__eol__no 0 --#define USB_SB_command__eol__yes 1 -- --#define USB_SB_command__eot__BITNR 1 --#define USB_SB_command__eot__WIDTH 1 --#define USB_SB_command__eot__no 0 --#define USB_SB_command__eot__yes 1 -- --#define USB_SB_command__intr__BITNR 3 --#define USB_SB_command__intr__WIDTH 1 --#define USB_SB_command__intr__no 0 --#define USB_SB_command__intr__yes 1 -- --#define USB_SB_command__tt__BITNR 4 --#define USB_SB_command__tt__WIDTH 2 --#define USB_SB_command__tt__zout 0 --#define USB_SB_command__tt__in 1 --#define USB_SB_command__tt__out 2 --#define USB_SB_command__tt__setup 3 -- -- --#define USB_SB_command__rem__BITNR 8 --#define USB_SB_command__rem__WIDTH 6 -- --#define USB_SB_command__full__BITNR 6 --#define USB_SB_command__full__WIDTH 1 --#define USB_SB_command__full__no 0 --#define USB_SB_command__full__yes 1 -- --#endif ---- linux-2.6.19.2.orig/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.h 2006-01-27 13:59:58.000000000 +0100 -@@ -0,0 +1,330 @@ -+#ifndef __LINUX_ETRAX_USB_H -+#define __LINUX_ETRAX_USB_H -+ -+#include -+#include -+ -+struct USB_IN_Desc { -+ volatile __u16 sw_len; -+ volatile __u16 command; -+ volatile unsigned long next; -+ volatile unsigned long buf; -+ volatile __u16 hw_len; -+ volatile __u16 status; -+}; -+ -+struct USB_SB_Desc { -+ volatile __u16 sw_len; -+ volatile __u16 command; -+ volatile unsigned long next; -+ volatile unsigned long buf; -+}; -+ -+struct USB_EP_Desc { -+ volatile __u16 hw_len; -+ volatile __u16 command; -+ volatile unsigned long sub; -+ volatile unsigned long next; -+}; -+ -+ -+/* Root Hub port status struct */ -+struct crisv10_rh { -+ volatile __u16 wPortChange[2]; -+ volatile __u16 wPortStatusPrev[2]; -+}; -+ -+/* HCD description */ -+struct crisv10_hcd { -+ spinlock_t lock; -+ __u8 num_ports; -+ __u8 running; -+}; -+ -+ -+/* Endpoint HC private data description */ -+struct crisv10_ep_priv { -+ int epid; -+}; -+ -+/* Additional software state info for a USB Controller epid */ -+struct etrax_epid { -+ __u8 inuse; /* !0 = setup in Etrax and used for a endpoint */ -+ __u8 disabled; /* !0 = Temporarly disabled to avoid resubmission */ -+ __u8 type; /* Setup as: PIPE_BULK, PIPE_CONTROL ... */ -+ __u8 out_traffic; /* !0 = This epid is for out traffic */ -+}; -+ -+/* Struct to hold information of scheduled later URB completion */ -+struct urb_later_data { -+ struct work_struct ws; -+ struct usb_hcd *hcd; -+ struct urb *urb; -+ int urb_num; -+ int status; -+}; -+ -+ -+typedef enum { -+ STARTED, -+ NOT_STARTED, -+ UNLINK, -+} crisv10_urb_state_t; -+ -+ -+struct crisv10_urb_priv { -+ /* Sequence number for this URB. Every new submited URB gets this from -+ a incrementing counter. Used when a URB is scheduled for later finish to -+ be sure that the intended URB hasn't already been completed (device -+ drivers has a tendency to reuse URBs once they are completed, causing us -+ to not be able to single old ones out only based on the URB pointer.) */ -+ __u32 urb_num; -+ -+ /* The first_sb field is used for freeing all SB descriptors belonging -+ to an urb. The corresponding ep descriptor's sub pointer cannot be -+ used for this since the DMA advances the sub pointer as it processes -+ the sb list. */ -+ struct USB_SB_Desc *first_sb; -+ -+ /* The last_sb field referes to the last SB descriptor that belongs to -+ this urb. This is important to know so we can free the SB descriptors -+ that ranges between first_sb and last_sb. */ -+ struct USB_SB_Desc *last_sb; -+ -+ /* The rx_offset field is used in ctrl and bulk traffic to keep track -+ of the offset in the urb's transfer_buffer where incoming data should be -+ copied to. */ -+ __u32 rx_offset; -+ -+ /* Counter used in isochronous transfers to keep track of the -+ number of packets received/transmitted. */ -+ __u32 isoc_packet_counter; -+ -+ /* Flag that marks if this Isoc Out URB has finished it's transfer. Used -+ because several URBs can be finished before list is processed */ -+ __u8 isoc_out_done; -+ -+ /* This field is used to pass information about the urb's current state -+ between the various interrupt handlers (thus marked volatile). */ -+ volatile crisv10_urb_state_t urb_state; -+ -+ /* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT. -+ When DMA8 sub-channel 2 has processed the SB list for this sequence we -+ get a interrupt. We also get a interrupt for In transfers and which -+ one of these interrupts that comes first depends of data size and device. -+ To be sure that we have got both interrupts before we complete the URB -+ we have these to flags that shows which part that has completed. -+ We can then check when we get one of the interrupts that if the other has -+ occured it's safe for us to complete the URB, otherwise we set appropriate -+ flag and do the completion when we get the other interrupt. */ -+ volatile unsigned char ctrl_zout_done; -+ volatile unsigned char ctrl_rx_done; -+ -+ /* Connection between the submitted urb and ETRAX epid number */ -+ __u8 epid; -+ -+ /* The rx_data_list field is used for periodic traffic, to hold -+ received data for later processing in the the complete_urb functions, -+ where the data us copied to the urb's transfer_buffer. Basically, we -+ use this intermediate storage because we don't know when it's safe to -+ reuse the transfer_buffer (FIXME?). */ -+ struct list_head rx_data_list; -+ -+ -+ /* The interval time rounded up to closest 2^N */ -+ int interval; -+ -+ /* Pool of EP descriptors needed if it's a INTR transfer. -+ Amount of EPs in pool correspons to how many INTR that should -+ be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */ -+ struct USB_EP_Desc* intr_ep_pool[128]; -+ -+ /* The mount of EPs allocated for this INTR URB */ -+ int intr_ep_pool_length; -+ -+ /* Pointer to info struct if URB is scheduled to be finished later */ -+ struct urb_later_data* later_data; -+}; -+ -+ -+/* This struct is for passing data from the top half to the bottom half irq -+ handlers */ -+struct crisv10_irq_reg { -+ struct usb_hcd* hcd; -+ __u32 r_usb_epid_attn; -+ __u8 r_usb_status; -+ __u16 r_usb_rh_port_status_1; -+ __u16 r_usb_rh_port_status_2; -+ __u32 r_usb_irq_mask_read; -+ __u32 r_usb_fm_number; -+ struct work_struct usb_bh; -+}; -+ -+ -+/* This struct is for passing data from the isoc top half to the isoc bottom -+ half. */ -+struct crisv10_isoc_complete_data { -+ struct usb_hcd *hcd; -+ struct urb *urb; -+ struct work_struct usb_bh; -+}; -+ -+/* Entry item for URB lists for each endpint */ -+typedef struct urb_entry -+{ -+ struct urb *urb; -+ struct list_head list; -+} urb_entry_t; -+ -+/* --------------------------------------------------------------------------- -+ Virtual Root HUB -+ ------------------------------------------------------------------------- */ -+/* destination of request */ -+#define RH_INTERFACE 0x01 -+#define RH_ENDPOINT 0x02 -+#define RH_OTHER 0x03 -+ -+#define RH_CLASS 0x20 -+#define RH_VENDOR 0x40 -+ -+/* Requests: bRequest << 8 | bmRequestType */ -+#define RH_GET_STATUS 0x0080 -+#define RH_CLEAR_FEATURE 0x0100 -+#define RH_SET_FEATURE 0x0300 -+#define RH_SET_ADDRESS 0x0500 -+#define RH_GET_DESCRIPTOR 0x0680 -+#define RH_SET_DESCRIPTOR 0x0700 -+#define RH_GET_CONFIGURATION 0x0880 -+#define RH_SET_CONFIGURATION 0x0900 -+#define RH_GET_STATE 0x0280 -+#define RH_GET_INTERFACE 0x0A80 -+#define RH_SET_INTERFACE 0x0B00 -+#define RH_SYNC_FRAME 0x0C80 -+/* Our Vendor Specific Request */ -+#define RH_SET_EP 0x2000 -+ -+ -+/* Hub port features */ -+#define RH_PORT_CONNECTION 0x00 -+#define RH_PORT_ENABLE 0x01 -+#define RH_PORT_SUSPEND 0x02 -+#define RH_PORT_OVER_CURRENT 0x03 -+#define RH_PORT_RESET 0x04 -+#define RH_PORT_POWER 0x08 -+#define RH_PORT_LOW_SPEED 0x09 -+#define RH_C_PORT_CONNECTION 0x10 -+#define RH_C_PORT_ENABLE 0x11 -+#define RH_C_PORT_SUSPEND 0x12 -+#define RH_C_PORT_OVER_CURRENT 0x13 -+#define RH_C_PORT_RESET 0x14 -+ -+/* Hub features */ -+#define RH_C_HUB_LOCAL_POWER 0x00 -+#define RH_C_HUB_OVER_CURRENT 0x01 -+ -+#define RH_DEVICE_REMOTE_WAKEUP 0x00 -+#define RH_ENDPOINT_STALL 0x01 -+ -+/* Our Vendor Specific feature */ -+#define RH_REMOVE_EP 0x00 -+ -+ -+#define RH_ACK 0x01 -+#define RH_REQ_ERR -1 -+#define RH_NACK 0x00 -+ -+/* Field definitions for */ -+ -+#define USB_IN_command__eol__BITNR 0 /* command macros */ -+#define USB_IN_command__eol__WIDTH 1 -+#define USB_IN_command__eol__no 0 -+#define USB_IN_command__eol__yes 1 -+ -+#define USB_IN_command__intr__BITNR 3 -+#define USB_IN_command__intr__WIDTH 1 -+#define USB_IN_command__intr__no 0 -+#define USB_IN_command__intr__yes 1 -+ -+#define USB_IN_status__eop__BITNR 1 /* status macros. */ -+#define USB_IN_status__eop__WIDTH 1 -+#define USB_IN_status__eop__no 0 -+#define USB_IN_status__eop__yes 1 -+ -+#define USB_IN_status__eot__BITNR 5 -+#define USB_IN_status__eot__WIDTH 1 -+#define USB_IN_status__eot__no 0 -+#define USB_IN_status__eot__yes 1 -+ -+#define USB_IN_status__error__BITNR 6 -+#define USB_IN_status__error__WIDTH 1 -+#define USB_IN_status__error__no 0 -+#define USB_IN_status__error__yes 1 -+ -+#define USB_IN_status__nodata__BITNR 7 -+#define USB_IN_status__nodata__WIDTH 1 -+#define USB_IN_status__nodata__no 0 -+#define USB_IN_status__nodata__yes 1 -+ -+#define USB_IN_status__epid__BITNR 8 -+#define USB_IN_status__epid__WIDTH 5 -+ -+#define USB_EP_command__eol__BITNR 0 -+#define USB_EP_command__eol__WIDTH 1 -+#define USB_EP_command__eol__no 0 -+#define USB_EP_command__eol__yes 1 -+ -+#define USB_EP_command__eof__BITNR 1 -+#define USB_EP_command__eof__WIDTH 1 -+#define USB_EP_command__eof__no 0 -+#define USB_EP_command__eof__yes 1 -+ -+#define USB_EP_command__intr__BITNR 3 -+#define USB_EP_command__intr__WIDTH 1 -+#define USB_EP_command__intr__no 0 -+#define USB_EP_command__intr__yes 1 -+ -+#define USB_EP_command__enable__BITNR 4 -+#define USB_EP_command__enable__WIDTH 1 -+#define USB_EP_command__enable__no 0 -+#define USB_EP_command__enable__yes 1 -+ -+#define USB_EP_command__hw_valid__BITNR 5 -+#define USB_EP_command__hw_valid__WIDTH 1 -+#define USB_EP_command__hw_valid__no 0 -+#define USB_EP_command__hw_valid__yes 1 -+ -+#define USB_EP_command__epid__BITNR 8 -+#define USB_EP_command__epid__WIDTH 5 -+ -+#define USB_SB_command__eol__BITNR 0 /* command macros. */ -+#define USB_SB_command__eol__WIDTH 1 -+#define USB_SB_command__eol__no 0 -+#define USB_SB_command__eol__yes 1 -+ -+#define USB_SB_command__eot__BITNR 1 -+#define USB_SB_command__eot__WIDTH 1 -+#define USB_SB_command__eot__no 0 -+#define USB_SB_command__eot__yes 1 -+ -+#define USB_SB_command__intr__BITNR 3 -+#define USB_SB_command__intr__WIDTH 1 -+#define USB_SB_command__intr__no 0 -+#define USB_SB_command__intr__yes 1 -+ -+#define USB_SB_command__tt__BITNR 4 -+#define USB_SB_command__tt__WIDTH 2 -+#define USB_SB_command__tt__zout 0 -+#define USB_SB_command__tt__in 1 -+#define USB_SB_command__tt__out 2 -+#define USB_SB_command__tt__setup 3 -+ -+ -+#define USB_SB_command__rem__BITNR 8 -+#define USB_SB_command__rem__WIDTH 6 -+ -+#define USB_SB_command__full__BITNR 6 -+#define USB_SB_command__full__WIDTH 1 -+#define USB_SB_command__full__no 0 -+#define USB_SB_command__full__yes 1 -+ -+#endif -diff -urN linux-2.6.19.2.orig/drivers/net/cris/Makefile linux-2.6.19.2.dev/drivers/net/cris/Makefile ---- linux-2.6.19.2.orig/drivers/net/cris/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/net/cris/Makefile 2005-01-04 13:09:12.000000000 +0100 -@@ -1 +1,2 @@ - obj-$(CONFIG_ETRAX_ARCH_V10) += eth_v10.o -+obj-$(CONFIG_ETRAX_ARCH_V32) += eth_v32.o -diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v10.c linux-2.6.19.2.dev/drivers/net/cris/eth_v10.c ---- linux-2.6.19.2.orig/drivers/net/cris/eth_v10.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/net/cris/eth_v10.c 2007-01-15 16:35:48.000000000 +0100 -@@ -1,221 +1,10 @@ --/* $Id: ethernet.c,v 1.31 2004/10/18 14:49:03 starvik Exp $ -- * -- * e100net.c: A network driver for the ETRAX 100LX network controller. -+/* -+ * Driver for the ETRAX 100LX network controller. - * -- * Copyright (c) 1998-2002 Axis Communications AB. -+ * Copyright (c) 1998-2006 Axis Communications AB. - * - * The outline of this driver comes from skeleton.c. - * -- * $Log: ethernet.c,v $ -- * Revision 1.31 2004/10/18 14:49:03 starvik -- * Use RX interrupt as random source -- * -- * Revision 1.30 2004/09/29 10:44:04 starvik -- * Enabed MAC-address output again -- * -- * Revision 1.29 2004/08/24 07:14:05 starvik -- * Make use of generic MDIO interface and constants. -- * -- * Revision 1.28 2004/08/20 09:37:11 starvik -- * Added support for Intel LXT972A. Creds to Randy Scarborough. -- * -- * Revision 1.27 2004/08/16 12:37:22 starvik -- * Merge of Linux 2.6.8 -- * -- * Revision 1.25 2004/06/21 10:29:57 starvik -- * Merge of Linux 2.6.7 -- * -- * Revision 1.23 2004/06/09 05:29:22 starvik -- * Avoid any race where R_DMA_CH1_FIRST is NULL (may trigger cache bug). -- * -- * Revision 1.22 2004/05/14 07:58:03 starvik -- * Merge of changes from 2.4 -- * -- * Revision 1.20 2004/03/11 11:38:40 starvik -- * Merge of Linux 2.6.4 -- * -- * Revision 1.18 2003/12/03 13:45:46 starvik -- * Use hardware pad for short packets to prevent information leakage. -- * -- * Revision 1.17 2003/07/04 08:27:37 starvik -- * Merge of Linux 2.5.74 -- * -- * Revision 1.16 2003/04/24 08:28:22 starvik -- * New LED behaviour: LED off when no link -- * -- * Revision 1.15 2003/04/09 05:20:47 starvik -- * Merge of Linux 2.5.67 -- * -- * Revision 1.13 2003/03/06 16:11:01 henriken -- * Off by one error in group address register setting. -- * -- * Revision 1.12 2003/02/27 17:24:19 starvik -- * Corrected Rev to Revision -- * -- * Revision 1.11 2003/01/24 09:53:21 starvik -- * Oops. Initialize GA to 0, not to 1 -- * -- * Revision 1.10 2003/01/24 09:50:55 starvik -- * Initialize GA_0 and GA_1 to 0 to avoid matching of unwanted packets -- * -- * Revision 1.9 2002/12/13 07:40:58 starvik -- * Added basic ethtool interface -- * Handled out of memory when allocating new buffers -- * -- * Revision 1.8 2002/12/11 13:13:57 starvik -- * Added arch/ to v10 specific includes -- * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) -- * -- * Revision 1.7 2002/11/26 09:41:42 starvik -- * Added e100_set_config (standard interface to set media type) -- * Added protection against preemptive scheduling -- * Added standard MII ioctls -- * -- * Revision 1.6 2002/11/21 07:18:18 starvik -- * Timers must be initialized in 2.5.48 -- * -- * Revision 1.5 2002/11/20 11:56:11 starvik -- * Merge of Linux 2.5.48 -- * -- * Revision 1.4 2002/11/18 07:26:46 starvik -- * Linux 2.5 port of latest Linux 2.4 ethernet driver -- * -- * Revision 1.33 2002/10/02 20:16:17 hp -- * SETF, SETS: Use underscored IO_x_ macros rather than incorrect token concatenation -- * -- * Revision 1.32 2002/09/16 06:05:58 starvik -- * Align memory returned by dev_alloc_skb -- * Moved handling of sent packets to interrupt to avoid reference counting problem -- * -- * Revision 1.31 2002/09/10 13:28:23 larsv -- * Return -EINVAL for unknown ioctls to avoid confusing tools that tests -- * for supported functionality by issuing special ioctls, i.e. wireless -- * extensions. -- * -- * Revision 1.30 2002/05/07 18:50:08 johana -- * Correct spelling in comments. -- * -- * Revision 1.29 2002/05/06 05:38:49 starvik -- * Performance improvements: -- * Large packets are not copied (breakpoint set to 256 bytes) -- * The cache bug workaround is delayed until half of the receive list -- * has been used -- * Added transmit list -- * Transmit interrupts are only enabled when transmit queue is full -- * -- * Revision 1.28.2.1 2002/04/30 08:15:51 starvik -- * Performance improvements: -- * Large packets are not copied (breakpoint set to 256 bytes) -- * The cache bug workaround is delayed until half of the receive list -- * has been used. -- * Added transmit list -- * Transmit interrupts are only enabled when transmit queue is full -- * -- * Revision 1.28 2002/04/22 11:47:21 johana -- * Fix according to 2.4.19-pre7. time_after/time_before and -- * missing end of comment. -- * The patch has a typo for ethernet.c in e100_clear_network_leds(), -- * that is fixed here. -- * -- * Revision 1.27 2002/04/12 11:55:11 bjornw -- * Added TODO -- * -- * Revision 1.26 2002/03/15 17:11:02 bjornw -- * Use prepare_rx_descriptor after the CPU has touched the receiving descs -- * -- * Revision 1.25 2002/03/08 13:07:53 bjornw -- * Unnecessary spinlock removed -- * -- * Revision 1.24 2002/02/20 12:57:43 fredriks -- * Replaced MIN() with min(). -- * -- * Revision 1.23 2002/02/20 10:58:14 fredriks -- * Strip the Ethernet checksum (4 bytes) before forwarding a frame to upper layers. -- * -- * Revision 1.22 2002/01/30 07:48:22 matsfg -- * Initiate R_NETWORK_TR_CTRL -- * -- * Revision 1.21 2001/11/23 11:54:49 starvik -- * Added IFF_PROMISC and IFF_ALLMULTI handling in set_multicast_list -- * Removed compiler warnings -- * -- * Revision 1.20 2001/11/12 19:26:00 pkj -- * * Corrected e100_negotiate() to not assign half to current_duplex when -- * it was supposed to compare them... -- * * Cleaned up failure handling in e100_open(). -- * * Fixed compiler warnings. -- * -- * Revision 1.19 2001/11/09 07:43:09 starvik -- * Added full duplex support -- * Added ioctl to set speed and duplex -- * Clear LED timer only runs when LED is lit -- * -- * Revision 1.18 2001/10/03 14:40:43 jonashg -- * Update rx_bytes counter. -- * -- * Revision 1.17 2001/06/11 12:43:46 olof -- * Modified defines for network LED behavior -- * -- * Revision 1.16 2001/05/30 06:12:46 markusl -- * TxDesc.next should not be set to NULL -- * -- * Revision 1.15 2001/05/29 10:27:04 markusl -- * Updated after review remarks: -- * +Use IO_EXTRACT -- * +Handle underrun -- * -- * Revision 1.14 2001/05/29 09:20:14 jonashg -- * Use driver name on printk output so one can tell which driver that complains. -- * -- * Revision 1.13 2001/05/09 12:35:59 johana -- * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h -- * -- * Revision 1.12 2001/04/05 11:43:11 tobiasa -- * Check dev before panic. -- * -- * Revision 1.11 2001/04/04 11:21:05 markusl -- * Updated according to review remarks -- * -- * Revision 1.10 2001/03/26 16:03:06 bjornw -- * Needs linux/config.h -- * -- * Revision 1.9 2001/03/19 14:47:48 pkj -- * * Make sure there is always a pause after the network LEDs are -- * changed so they will not look constantly lit during heavy traffic. -- * * Always use HZ when setting times relative to jiffies. -- * * Use LED_NETWORK_SET() when setting the network LEDs. -- * -- * Revision 1.8 2001/02/27 13:52:48 bjornw -- * malloc.h -> slab.h -- * -- * Revision 1.7 2001/02/23 13:46:38 bjornw -- * Spellling check -- * -- * Revision 1.6 2001/01/26 15:21:04 starvik -- * Don't disable interrupts while reading MDIO registers (MDIO is slow) -- * Corrected promiscuous mode -- * Improved deallocation of IRQs ("ifconfig eth0 down" now works) -- * -- * Revision 1.5 2000/11/29 17:22:22 bjornw -- * Get rid of the udword types legacy stuff -- * -- * Revision 1.4 2000/11/22 16:36:09 bjornw -- * Please marketing by using the correct case when spelling Etrax. -- * -- * Revision 1.3 2000/11/21 16:43:04 bjornw -- * Minor short->int change -- * -- * Revision 1.2 2000/11/08 14:27:57 bjornw -- * 2.4 port -- * -- * Revision 1.1 2000/11/06 13:56:00 bjornw -- * Verbatim copy of the 1.24 version of e100net.c from elinux -- * -- * Revision 1.24 2000/10/04 15:55:23 bjornw -- * * Use virt_to_phys etc. for DMA addresses -- * * Removed bogus CHECKSUM_UNNECESSARY -- * -- * - */ - - -@@ -251,6 +40,7 @@ - #include - #include - #include -+#include - - //#define ETHDEBUG - #define D(x) -@@ -280,6 +70,9 @@ - * by this lock as well. - */ - spinlock_t lock; -+ -+ spinlock_t led_lock; /* Protect LED state */ -+ spinlock_t transceiver_lock; /* Protect transceiver state. */ - }; - - typedef struct etrax_eth_descr -@@ -296,8 +89,6 @@ - void (*check_duplex)(struct net_device* dev); - }; - --struct transceiver_ops* transceiver; -- - /* Duplex settings */ - enum duplex - { -@@ -308,7 +99,7 @@ - - /* Dma descriptors etc. */ - --#define MAX_MEDIA_DATA_SIZE 1518 -+#define MAX_MEDIA_DATA_SIZE 1522 - - #define MIN_PACKET_LEN 46 - #define ETHER_HEAD_LEN 14 -@@ -332,9 +123,9 @@ - #define MDIO_TDK_DIAGNOSTIC_DPLX 0x800 - - /*Intel LXT972A specific*/ --#define MDIO_INT_STATUS_REG_2 0x0011 --#define MDIO_INT_FULL_DUPLEX_IND ( 1 << 9 ) --#define MDIO_INT_SPEED ( 1 << 14 ) -+#define MDIO_INT_STATUS_REG_2 0x0011 -+#define MDIO_INT_FULL_DUPLEX_IND (1 << 9) -+#define MDIO_INT_SPEED (1 << 14) - - /* Network flash constants */ - #define NET_FLASH_TIME (HZ/50) /* 20 ms */ -@@ -345,8 +136,8 @@ - #define NO_NETWORK_ACTIVITY 0 - #define NETWORK_ACTIVITY 1 - --#define NBR_OF_RX_DESC 64 --#define NBR_OF_TX_DESC 256 -+#define NBR_OF_RX_DESC 32 -+#define NBR_OF_TX_DESC 16 - - /* Large packets are sent directly to upper layers while small packets are */ - /* copied (to reduce memory waste). The following constant decides the breakpoint */ -@@ -368,7 +159,6 @@ - static etrax_eth_descr *myNextRxDesc; /* Points to the next descriptor to - to be processed */ - static etrax_eth_descr *myLastRxDesc; /* The last processed descriptor */ --static etrax_eth_descr *myPrevRxDesc; /* The descriptor right before myNextRxDesc */ - - static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32))); - -@@ -378,7 +168,6 @@ - static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32))); - - static unsigned int network_rec_config_shadow = 0; --static unsigned int mdio_phy_addr; /* Transciever address */ - - static unsigned int network_tr_ctrl_shadow = 0; - -@@ -412,7 +201,7 @@ - static void e100_tx_timeout(struct net_device *dev); - static struct net_device_stats *e100_get_stats(struct net_device *dev); - static void set_multicast_list(struct net_device *dev); --static void e100_hardware_send_packet(char *buf, int length); -+static void e100_hardware_send_packet(struct net_local* np, char *buf, int length); - static void update_rx_stats(struct net_device_stats *); - static void update_tx_stats(struct net_device_stats *); - static int e100_probe_transceiver(struct net_device* dev); -@@ -435,7 +224,10 @@ - static void e100_set_network_leds(int active); - - static const struct ethtool_ops e100_ethtool_ops; -- -+#if defined(CONFIG_ETRAX_NO_PHY) -+static void dummy_check_speed(struct net_device* dev); -+static void dummy_check_duplex(struct net_device* dev); -+#else - static void broadcom_check_speed(struct net_device* dev); - static void broadcom_check_duplex(struct net_device* dev); - static void tdk_check_speed(struct net_device* dev); -@@ -444,16 +236,29 @@ - static void intel_check_duplex(struct net_device* dev); - static void generic_check_speed(struct net_device* dev); - static void generic_check_duplex(struct net_device* dev); -+#endif -+#ifdef CONFIG_NET_POLL_CONTROLLER -+static void e100_netpoll(struct net_device* dev); -+#endif -+ -+static int autoneg_normal = 1; - - struct transceiver_ops transceivers[] = - { -+#if defined(CONFIG_ETRAX_NO_PHY) -+ {0x0000, dummy_check_speed, dummy_check_duplex} /* Dummy */ -+#else - {0x1018, broadcom_check_speed, broadcom_check_duplex}, /* Broadcom */ - {0xC039, tdk_check_speed, tdk_check_duplex}, /* TDK 2120 */ - {0x039C, tdk_check_speed, tdk_check_duplex}, /* TDK 2120C */ -- {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/ -+ {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/ - {0x0000, generic_check_speed, generic_check_duplex} /* Generic, must be last */ -+#endif - }; - -+struct transceiver_ops* transceiver = &transceivers[0]; -+static unsigned int mdio_phy_addr = 0; /* PHY address on MDIO bus */ -+ - #define tx_done(dev) (*R_DMA_CH0_CMD == 0) - - /* -@@ -468,18 +273,26 @@ - etrax_ethernet_init(void) - { - struct net_device *dev; -- struct net_local* np; -+ struct net_local* np; - int i, err; - - printk(KERN_INFO -- "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2003 Axis Communications AB\n"); -- -+ "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2006 Axis Communications AB\n"); -+ -+ if (cris_request_io_interface(if_eth, cardname)) { -+ printk(KERN_CRIT "etrax_ethernet_init failed to get IO interface\n"); -+ return -EBUSY; -+ } -+ - dev = alloc_etherdev(sizeof(struct net_local)); -- np = dev->priv; -- - if (!dev) - return -ENOMEM; -+ -+ np = netdev_priv(dev); - -+ /* we do our own locking */ -+ dev->features |= NETIF_F_LLTX; -+ - dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */ - - /* now setup our etrax specific stuff */ -@@ -495,18 +308,26 @@ - dev->get_stats = e100_get_stats; - dev->set_multicast_list = set_multicast_list; - dev->set_mac_address = e100_set_mac_address; -- dev->ethtool_ops = &e100_ethtool_ops; -+ dev->ethtool_ops = &e100_ethtool_ops; - dev->do_ioctl = e100_ioctl; -- dev->set_config = e100_set_config; -+ dev->set_config = e100_set_config; - dev->tx_timeout = e100_tx_timeout; -+#ifdef CONFIG_NET_POLL_CONTROLLER -+ dev->poll_controller = e100_netpoll; -+#endif -+ -+ spin_lock_init(&np->lock); -+ spin_lock_init(&np->led_lock); -+ spin_lock_init(&np->transceiver_lock); - - /* Initialise the list of Etrax DMA-descriptors */ - - /* Initialise receive descriptors */ - - for (i = 0; i < NBR_OF_RX_DESC; i++) { -- /* Allocate two extra cachelines to make sure that buffer used by DMA -- * does not share cacheline with any other data (to avoid cache bug) -+ /* Allocate two extra cachelines to make sure that buffer used -+ * by DMA does not share cacheline with any other data (to -+ * avoid cache bug) - */ - RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES); - if (!RxDescList[i].skb) -@@ -517,6 +338,7 @@ - RxDescList[i].descr.buf = L1_CACHE_ALIGN(virt_to_phys(RxDescList[i].skb->data)); - RxDescList[i].descr.status = 0; - RxDescList[i].descr.hw_len = 0; -+ - prepare_rx_descriptor(&RxDescList[i].descr); - } - -@@ -542,7 +364,6 @@ - - myNextRxDesc = &RxDescList[0]; - myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; -- myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; - myFirstTxDesc = &TxDescList[0]; - myNextTxDesc = &TxDescList[0]; - myLastTxDesc = &TxDescList[NBR_OF_TX_DESC - 1]; -@@ -563,18 +384,19 @@ - current_speed = 10; - current_speed_selection = 0; /* Auto */ - speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; -- duplex_timer.data = (unsigned long)dev; -+ speed_timer.data = (unsigned long)dev; - speed_timer.function = e100_check_speed; - - clear_led_timer.function = e100_clear_network_leds; -+ clear_led_timer.data = (unsigned long)dev; - - full_duplex = 0; - current_duplex = autoneg; - duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; -- duplex_timer.data = (unsigned long)dev; -+ duplex_timer.data = (unsigned long)dev; - duplex_timer.function = e100_check_duplex; - -- /* Initialize mii interface */ -+ /* Initialize mii interface */ - np->mii_if.phy_id = mdio_phy_addr; - np->mii_if.phy_id_mask = 0x1f; - np->mii_if.reg_num_mask = 0x1f; -@@ -586,6 +408,9 @@ - /* unwanted addresses are matched */ - *R_NETWORK_GA_0 = 0x00000000; - *R_NETWORK_GA_1 = 0x00000000; -+ -+ /* Initialize next time the led can flash */ -+ led_next_time = jiffies; - return 0; - } - -@@ -596,7 +421,7 @@ - static int - e100_set_mac_address(struct net_device *dev, void *p) - { -- struct net_local *np = (struct net_local *)dev->priv; -+ struct net_local *np = netdev_priv(dev); - struct sockaddr *addr = p; - int i; - -@@ -680,17 +505,36 @@ - /* allocate the irq corresponding to the transmitting DMA */ - - if (request_irq(NETWORK_DMA_TX_IRQ_NBR, e100rxtx_interrupt, 0, -- cardname, (void *)dev)) { -+ cardname, (void *)dev)) { - goto grace_exit1; - } - - /* allocate the irq corresponding to the network errors etc */ - - if (request_irq(NETWORK_STATUS_IRQ_NBR, e100nw_interrupt, 0, -- cardname, (void *)dev)) { -+ cardname, (void *)dev)) { - goto grace_exit2; - } - -+ /* -+ * Always allocate the DMA channels after the IRQ, -+ * and clean up on failure. -+ */ -+ -+ if (cris_request_dma(NETWORK_TX_DMA_NBR, -+ cardname, -+ DMA_VERBOSE_ON_ERROR, -+ dma_eth)) { -+ goto grace_exit3; -+ } -+ -+ if (cris_request_dma(NETWORK_RX_DMA_NBR, -+ cardname, -+ DMA_VERBOSE_ON_ERROR, -+ dma_eth)) { -+ goto grace_exit4; -+ } -+ - /* give the HW an idea of what MAC address we want */ - - *R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) | -@@ -705,6 +549,7 @@ - - *R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */ - #else -+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, max_size, size1522); - SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive); - SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable); - SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex); -@@ -724,8 +569,7 @@ - SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable); - *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow; - -- save_flags(flags); -- cli(); -+ local_irq_save(flags); - - /* enable the irq's for ethernet DMA */ - -@@ -757,12 +601,13 @@ - - *R_DMA_CH0_FIRST = 0; - *R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc); -+ netif_start_queue(dev); - -- restore_flags(flags); -+ local_irq_restore(flags); - - /* Probe for transceiver */ - if (e100_probe_transceiver(dev)) -- goto grace_exit3; -+ goto grace_exit5; - - /* Start duplex/speed timers */ - add_timer(&speed_timer); -@@ -771,10 +616,14 @@ - /* We are now ready to accept transmit requeusts from - * the queueing layer of the networking. - */ -- netif_start_queue(dev); -+ netif_carrier_on(dev); - - return 0; - -+grace_exit5: -+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname); -+grace_exit4: -+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname); - grace_exit3: - free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev); - grace_exit2: -@@ -785,7 +634,13 @@ - return -EAGAIN; - } - -- -+#if defined(CONFIG_ETRAX_NO_PHY) -+static void -+dummy_check_speed(struct net_device* dev) -+{ -+ current_speed = 100; -+} -+#else - static void - generic_check_speed(struct net_device* dev) - { -@@ -821,15 +676,18 @@ - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2); - current_speed = (data & MDIO_INT_SPEED ? 100 : 10); - } -- -+#endif - static void - e100_check_speed(unsigned long priv) - { - struct net_device* dev = (struct net_device*)priv; -+ struct net_local *np = netdev_priv(dev); - static int led_initiated = 0; - unsigned long data; - int old_speed = current_speed; - -+ spin_lock(&np->transceiver_lock); -+ - data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR); - if (!(data & BMSR_LSTATUS)) { - current_speed = 0; -@@ -837,14 +695,22 @@ - transceiver->check_speed(dev); - } - -+ spin_lock(&np->led_lock); - if ((old_speed != current_speed) || !led_initiated) { - led_initiated = 1; - e100_set_network_leds(NO_NETWORK_ACTIVITY); -+ if (current_speed) -+ netif_carrier_on(dev); -+ else -+ netif_carrier_off(dev); - } -+ spin_unlock(&np->led_lock); - - /* Reinitialize the timer. */ - speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; - add_timer(&speed_timer); -+ -+ spin_unlock(&np->transceiver_lock); - } - - static void -@@ -857,7 +723,7 @@ - ADVERTISE_10HALF | ADVERTISE_10FULL); - - switch (current_speed_selection) { -- case 10 : -+ case 10: - if (current_duplex == full) - data |= ADVERTISE_10FULL; - else if (current_duplex == half) -@@ -866,7 +732,7 @@ - data |= ADVERTISE_10HALF | ADVERTISE_10FULL; - break; - -- case 100 : -+ case 100: - if (current_duplex == full) - data |= ADVERTISE_100FULL; - else if (current_duplex == half) -@@ -875,45 +741,54 @@ - data |= ADVERTISE_100HALF | ADVERTISE_100FULL; - break; - -- case 0 : /* Auto */ -+ case 0: /* Auto */ - if (current_duplex == full) - data |= ADVERTISE_100FULL | ADVERTISE_10FULL; - else if (current_duplex == half) - data |= ADVERTISE_100HALF | ADVERTISE_10HALF; - else - data |= ADVERTISE_10HALF | ADVERTISE_10FULL | -- ADVERTISE_100HALF | ADVERTISE_100FULL; -+ ADVERTISE_100HALF | ADVERTISE_100FULL; - break; - -- default : /* assume autoneg speed and duplex */ -+ default: /* assume autoneg speed and duplex */ - data |= ADVERTISE_10HALF | ADVERTISE_10FULL | -- ADVERTISE_100HALF | ADVERTISE_100FULL; -+ ADVERTISE_100HALF | ADVERTISE_100FULL; -+ break; - } - - e100_set_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE, data); - - /* Renegotiate with link partner */ -- data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR); -- data |= BMCR_ANENABLE | BMCR_ANRESTART; -- -+ if (autoneg_normal) { -+ data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR); -+ data |= BMCR_ANENABLE | BMCR_ANRESTART; -+ } - e100_set_mdio_reg(dev, mdio_phy_addr, MII_BMCR, data); - } - - static void - e100_set_speed(struct net_device* dev, unsigned long speed) - { -+ struct net_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->transceiver_lock); - if (speed != current_speed_selection) { - current_speed_selection = speed; - e100_negotiate(dev); - } -+ spin_unlock(&np->transceiver_lock); - } - - static void - e100_check_duplex(unsigned long priv) - { - struct net_device *dev = (struct net_device *)priv; -- struct net_local *np = (struct net_local *)dev->priv; -- int old_duplex = full_duplex; -+ struct net_local *np = netdev_priv(dev); -+ int old_duplex; -+ -+ spin_lock(&np->transceiver_lock); -+ old_duplex = full_duplex; - transceiver->check_duplex(dev); - if (old_duplex != full_duplex) { - /* Duplex changed */ -@@ -925,12 +800,20 @@ - duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; - add_timer(&duplex_timer); - np->mii_if.full_duplex = full_duplex; -+ spin_unlock(&np->transceiver_lock); - } -- -+#if defined(CONFIG_ETRAX_NO_PHY) -+static void -+dummy_check_duplex(struct net_device* dev) -+{ -+ full_duplex = 1; -+} -+#else - static void - generic_check_duplex(struct net_device* dev) - { - unsigned long data; -+ - data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE); - if ((data & ADVERTISE_10FULL) || - (data & ADVERTISE_100FULL)) -@@ -943,6 +826,7 @@ - tdk_check_duplex(struct net_device* dev) - { - unsigned long data; -+ - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG); - full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0; - } -@@ -951,6 +835,7 @@ - broadcom_check_duplex(struct net_device* dev) - { - unsigned long data; -+ - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG); - full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0; - } -@@ -959,26 +844,35 @@ - intel_check_duplex(struct net_device* dev) - { - unsigned long data; -+ - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2); - full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0; - } -- -+#endif - static void - e100_set_duplex(struct net_device* dev, enum duplex new_duplex) - { -+ struct net_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->transceiver_lock); - if (new_duplex != current_duplex) { - current_duplex = new_duplex; - e100_negotiate(dev); - } -+ spin_unlock(&np->transceiver_lock); - } - - static int - e100_probe_transceiver(struct net_device* dev) - { -+#if !defined(CONFIG_ETRAX_NO_PHY) - unsigned int phyid_high; - unsigned int phyid_low; - unsigned int oui; - struct transceiver_ops* ops = NULL; -+ struct net_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->transceiver_lock); - - /* Probe MDIO physical address */ - for (mdio_phy_addr = 0; mdio_phy_addr <= 31; mdio_phy_addr++) { -@@ -986,7 +880,7 @@ - break; - } - if (mdio_phy_addr == 32) -- return -ENODEV; -+ return -ENODEV; - - /* Get manufacturer */ - phyid_high = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID1); -@@ -999,6 +893,8 @@ - } - transceiver = ops; - -+ spin_unlock(&np->transceiver_lock); -+#endif - return 0; - } - -@@ -1006,7 +902,7 @@ - e100_get_mdio_reg(struct net_device *dev, int phy_id, int location) - { - unsigned short cmd; /* Data to be sent on MDIO port */ -- int data; /* Data read from MDIO */ -+ int data; /* Data read from MDIO */ - int bitCounter; - - /* Start of frame, OP Code, Physical Address, Register Address */ -@@ -1082,6 +978,7 @@ - e100_receive_mdio_bit() - { - unsigned char bit; -+ - *R_NETWORK_MGM_CTRL = 0; - bit = IO_EXTRACT(R_NETWORK_STAT, mdio, *R_NETWORK_STAT); - udelay(1); -@@ -1117,7 +1014,7 @@ - static void - e100_tx_timeout(struct net_device *dev) - { -- struct net_local *np = (struct net_local *)dev->priv; -+ struct net_local *np = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&np->lock, flags); -@@ -1139,8 +1036,7 @@ - e100_reset_transceiver(dev); - - /* and get rid of the packets that never got an interrupt */ -- while (myFirstTxDesc != myNextTxDesc) -- { -+ while (myFirstTxDesc != myNextTxDesc) { - dev_kfree_skb(myFirstTxDesc->skb); - myFirstTxDesc->skb = 0; - myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next); -@@ -1166,7 +1062,7 @@ - static int - e100_send_packet(struct sk_buff *skb, struct net_device *dev) - { -- struct net_local *np = (struct net_local *)dev->priv; -+ struct net_local *np = netdev_priv(dev); - unsigned char *buf = skb->data; - unsigned long flags; - -@@ -1179,7 +1075,7 @@ - - dev->trans_start = jiffies; - -- e100_hardware_send_packet(buf, skb->len); -+ e100_hardware_send_packet(np, buf, skb->len); - - myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next); - -@@ -1202,13 +1098,15 @@ - e100rxtx_interrupt(int irq, void *dev_id) - { - struct net_device *dev = (struct net_device *)dev_id; -- struct net_local *np = (struct net_local *)dev->priv; -- unsigned long irqbits = *R_IRQ_MASK2_RD; -+ struct net_local *np = netdev_priv(dev); -+ unsigned long irqbits; - -- /* Disable RX/TX IRQs to avoid reentrancy */ -- *R_IRQ_MASK2_CLR = -- IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) | -- IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr); -+ /* -+ * Note that both rx and tx interrupts are blocked at this point, -+ * regardless of which got us here. -+ */ -+ -+ irqbits = *R_IRQ_MASK2_RD; - - /* Handle received packets */ - if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) { -@@ -1224,7 +1122,7 @@ - * allocate a new buffer to put a packet in. - */ - e100_rx(dev); -- ((struct net_local *)dev->priv)->stats.rx_packets++; -+ np->stats.rx_packets++; - /* restart/continue on the channel, for safety */ - *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart); - /* clear dma channel 1 eop/descr irq bits */ -@@ -1239,8 +1137,7 @@ - - /* Report any packets that have been sent */ - while (myFirstTxDesc != phys_to_virt(*R_DMA_CH0_FIRST) && -- myFirstTxDesc != myNextTxDesc) -- { -+ (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) { - np->stats.tx_bytes += myFirstTxDesc->skb->len; - np->stats.tx_packets++; - -@@ -1249,19 +1146,15 @@ - dev_kfree_skb_irq(myFirstTxDesc->skb); - myFirstTxDesc->skb = 0; - myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next); -+ /* Wake up queue. */ -+ netif_wake_queue(dev); - } - - if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) { -- /* acknowledge the eop interrupt and wake up queue */ -+ /* acknowledge the eop interrupt. */ - *R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do); -- netif_wake_queue(dev); - } - -- /* Enable RX/TX IRQs again */ -- *R_IRQ_MASK2_SET = -- IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) | -- IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set); -- - return IRQ_HANDLED; - } - -@@ -1269,7 +1162,7 @@ - e100nw_interrupt(int irq, void *dev_id) - { - struct net_device *dev = (struct net_device *)dev_id; -- struct net_local *np = (struct net_local *)dev->priv; -+ struct net_local *np = netdev_priv(dev); - unsigned long irqbits = *R_IRQ_MASK0_RD; - - /* check for underrun irq */ -@@ -1291,7 +1184,6 @@ - SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr); - *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow; - SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop); -- *R_NETWORK_TR_CTRL = IO_STATE(R_NETWORK_TR_CTRL, clr_error, clr); - np->stats.tx_errors++; - D(printk("ethernet excessive collisions!\n")); - } -@@ -1304,12 +1196,13 @@ - { - struct sk_buff *skb; - int length = 0; -- struct net_local *np = (struct net_local *)dev->priv; -+ struct net_local *np = netdev_priv(dev); - unsigned char *skb_data_ptr; - #ifdef ETHDEBUG - int i; - #endif -- -+ etrax_eth_descr *prevRxDesc; /* The descriptor right before myNextRxDesc */ -+ spin_lock(&np->led_lock); - if (!led_active && time_after(jiffies, led_next_time)) { - /* light the network leds depending on the current speed. */ - e100_set_network_leds(NETWORK_ACTIVITY); -@@ -1319,9 +1212,10 @@ - led_active = 1; - mod_timer(&clear_led_timer, jiffies + HZ/10); - } -+ spin_unlock(&np->led_lock); - - length = myNextRxDesc->descr.hw_len - 4; -- ((struct net_local *)dev->priv)->stats.rx_bytes += length; -+ np->stats.rx_bytes += length; - - #ifdef ETHDEBUG - printk("Got a packet of length %d:\n", length); -@@ -1341,7 +1235,7 @@ - if (!skb) { - np->stats.rx_errors++; - printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); -- return; -+ goto update_nextrxdesc; - } - - skb_put(skb, length - ETHER_HEAD_LEN); /* allocate room for the packet body */ -@@ -1358,15 +1252,15 @@ - else { - /* Large packet, send directly to upper layers and allocate new - * memory (aligned to cache line boundary to avoid bug). -- * Before sending the skb to upper layers we must make sure that -- * skb->data points to the aligned start of the packet. -+ * Before sending the skb to upper layers we must make sure -+ * that skb->data points to the aligned start of the packet. - */ - int align; - struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES); - if (!new_skb) { - np->stats.rx_errors++; - printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); -- return; -+ goto update_nextrxdesc; - } - skb = myNextRxDesc->skb; - align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data; -@@ -1382,9 +1276,10 @@ - /* Send the packet to the upper layers */ - netif_rx(skb); - -+ update_nextrxdesc: - /* Prepare for next packet */ - myNextRxDesc->descr.status = 0; -- myPrevRxDesc = myNextRxDesc; -+ prevRxDesc = myNextRxDesc; - myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next); - - rx_queue_len++; -@@ -1392,9 +1287,9 @@ - /* Check if descriptors should be returned */ - if (rx_queue_len == RX_QUEUE_THRESHOLD) { - flush_etrax_cache(); -- myPrevRxDesc->descr.ctrl |= d_eol; -+ prevRxDesc->descr.ctrl |= d_eol; - myLastRxDesc->descr.ctrl &= ~d_eol; -- myLastRxDesc = myPrevRxDesc; -+ myLastRxDesc = prevRxDesc; - rx_queue_len = 0; - } - } -@@ -1403,7 +1298,7 @@ - static int - e100_close(struct net_device *dev) - { -- struct net_local *np = (struct net_local *)dev->priv; -+ struct net_local *np = netdev_priv(dev); - - printk(KERN_INFO "Closing %s.\n", dev->name); - -@@ -1431,6 +1326,9 @@ - free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev); - free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev); - -+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname); -+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname); -+ - /* Update the statistics here. */ - - update_rx_stats(&np->stats); -@@ -1448,46 +1346,56 @@ - { - struct mii_ioctl_data *data = if_mii(ifr); - struct net_local *np = netdev_priv(dev); -+ int ret = 0; -+ int old_autoneg; - - spin_lock(&np->lock); /* Preempt protection */ - switch (cmd) { -- case SIOCGMIIPHY: /* Get PHY address */ -+ case SIOCGMIIPHY: /* Get PHY address */ - data->phy_id = mdio_phy_addr; - break; -- case SIOCGMIIREG: /* Read MII register */ -+ case SIOCGMIIREG: /* Read MII register */ - data->val_out = e100_get_mdio_reg(dev, mdio_phy_addr, data->reg_num); - break; -- case SIOCSMIIREG: /* Write MII register */ -+ case SIOCSMIIREG: /* Write MII register */ - e100_set_mdio_reg(dev, mdio_phy_addr, data->reg_num, data->val_in); - break; -+ - /* The ioctls below should be considered obsolete but are */ - /* still present for compatability with old scripts/apps */ -- case SET_ETH_SPEED_10: /* 10 Mbps */ -+ case SET_ETH_SPEED_10: /* 10 Mbps */ - e100_set_speed(dev, 10); - break; -- case SET_ETH_SPEED_100: /* 100 Mbps */ -+ case SET_ETH_SPEED_100: /* 100 Mbps */ - e100_set_speed(dev, 100); - break; -- case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */ -+ case SET_ETH_SPEED_AUTO: /* Auto-negotiate speed */ - e100_set_speed(dev, 0); - break; -- case SET_ETH_DUPLEX_HALF: /* Half duplex. */ -+ case SET_ETH_DUPLEX_HALF: /* Half duplex */ - e100_set_duplex(dev, half); - break; -- case SET_ETH_DUPLEX_FULL: /* Full duplex. */ -+ case SET_ETH_DUPLEX_FULL: /* Full duplex */ - e100_set_duplex(dev, full); - break; -- case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex*/ -+ case SET_ETH_DUPLEX_AUTO: /* Auto-negotiate duplex */ - e100_set_duplex(dev, autoneg); - break; -+ case SET_ETH_AUTONEG: -+ old_autoneg = autoneg_normal; -+ autoneg_normal = *(int*)data; -+ if (autoneg_normal != old_autoneg) -+ e100_negotiate(dev); -+ break; - default: -+ spin_unlock(&np->lock); - return -EINVAL; - } - spin_unlock(&np->lock); -- return 0; -+ return ret; - } - --static int e100_set_settings(struct net_device *dev, -+static int e100_get_settings(struct net_device *dev, - struct ethtool_cmd *ecmd) - { - ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | -@@ -1565,7 +1473,8 @@ - static int - e100_set_config(struct net_device *dev, struct ifmap *map) - { -- struct net_local *np = (struct net_local *)dev->priv; -+ struct net_local *np = netdev_priv(dev); -+ - spin_lock(&np->lock); /* Preempt protection */ - - switch(map->port) { -@@ -1574,21 +1483,25 @@ - e100_set_speed(dev, 0); - e100_set_duplex(dev, autoneg); - break; -+ - case IF_PORT_10BASET: - e100_set_speed(dev, 10); - e100_set_duplex(dev, autoneg); - break; -+ - case IF_PORT_100BASET: - case IF_PORT_100BASETX: - e100_set_speed(dev, 100); - e100_set_duplex(dev, autoneg); - break; -+ - case IF_PORT_100BASEFX: - case IF_PORT_10BASE2: - case IF_PORT_AUI: - spin_unlock(&np->lock); - return -EOPNOTSUPP; - break; -+ - default: - printk(KERN_ERR "%s: Invalid media selected", dev->name); - spin_unlock(&np->lock); -@@ -1602,6 +1515,7 @@ - update_rx_stats(struct net_device_stats *es) - { - unsigned long r = *R_REC_COUNTERS; -+ - /* update stats relevant to reception errors */ - es->rx_fifo_errors += IO_EXTRACT(R_REC_COUNTERS, congestion, r); - es->rx_crc_errors += IO_EXTRACT(R_REC_COUNTERS, crc_error, r); -@@ -1613,11 +1527,11 @@ - update_tx_stats(struct net_device_stats *es) - { - unsigned long r = *R_TR_COUNTERS; -+ - /* update stats relevant to transmission errors */ - es->collisions += - IO_EXTRACT(R_TR_COUNTERS, single_col, r) + - IO_EXTRACT(R_TR_COUNTERS, multiple_col, r); -- es->tx_errors += IO_EXTRACT(R_TR_COUNTERS, deferred, r); - } - - /* -@@ -1627,8 +1541,9 @@ - static struct net_device_stats * - e100_get_stats(struct net_device *dev) - { -- struct net_local *lp = (struct net_local *)dev->priv; -+ struct net_local *lp = netdev_priv(dev); - unsigned long flags; -+ - spin_lock_irqsave(&lp->lock, flags); - - update_rx_stats(&lp->stats); -@@ -1640,21 +1555,21 @@ - - /* - * Set or clear the multicast filter for this adaptor. -- * num_addrs == -1 Promiscuous mode, receive all packets -- * num_addrs == 0 Normal mode, clear multicast list -- * num_addrs > 0 Multicast mode, receive normal and MC packets, -- * and do best-effort filtering. -+ * num_addrs == -1 Promiscuous mode, receive all packets -+ * num_addrs == 0 Normal mode, clear multicast list -+ * num_addrs > 0 Multicast mode, receive normal and MC packets, -+ * and do best-effort filtering. - */ - static void - set_multicast_list(struct net_device *dev) - { -- struct net_local *lp = (struct net_local *)dev->priv; -+ struct net_local *lp = netdev_priv(dev); - int num_addr = dev->mc_count; - unsigned long int lo_bits; - unsigned long int hi_bits; -+ - spin_lock(&lp->lock); -- if (dev->flags & IFF_PROMISC) -- { -+ if (dev->flags & IFF_PROMISC) { - /* promiscuous mode */ - lo_bits = 0xfffffffful; - hi_bits = 0xfffffffful; -@@ -1684,9 +1599,10 @@ - struct dev_mc_list *dmi = dev->mc_list; - int i; - char *baddr; -+ - lo_bits = 0x00000000ul; - hi_bits = 0x00000000ul; -- for (i=0; i= 32) { - hi_bits |= (1 << (hash_ix-32)); -- } -- else { -+ } else { - lo_bits |= (1 << hash_ix); - } - dmi = dmi->next; -@@ -1729,10 +1644,11 @@ - } - - void --e100_hardware_send_packet(char *buf, int length) -+e100_hardware_send_packet(struct net_local *np, char *buf, int length) - { - D(printk("e100 send pack, buf 0x%x len %d\n", buf, length)); - -+ spin_lock(&np->led_lock); - if (!led_active && time_after(jiffies, led_next_time)) { - /* light the network leds depending on the current speed. */ - e100_set_network_leds(NETWORK_ACTIVITY); -@@ -1742,15 +1658,16 @@ - led_active = 1; - mod_timer(&clear_led_timer, jiffies + HZ/10); - } -+ spin_unlock(&np->led_lock); - - /* configure the tx dma descriptor */ - myNextTxDesc->descr.sw_len = length; - myNextTxDesc->descr.ctrl = d_eop | d_eol | d_wait; - myNextTxDesc->descr.buf = virt_to_phys(buf); - -- /* Move end of list */ -- myLastTxDesc->descr.ctrl &= ~d_eol; -- myLastTxDesc = myNextTxDesc; -+ /* Move end of list */ -+ myLastTxDesc->descr.ctrl &= ~d_eol; -+ myLastTxDesc = myNextTxDesc; - - /* Restart DMA channel */ - *R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, restart); -@@ -1759,6 +1676,11 @@ - static void - e100_clear_network_leds(unsigned long dummy) - { -+ struct net_device *dev = (struct net_device *)dummy; -+ struct net_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->led_lock); -+ - if (led_active && time_after(jiffies, led_next_time)) { - e100_set_network_leds(NO_NETWORK_ACTIVITY); - -@@ -1766,6 +1688,8 @@ - led_next_time = jiffies + NET_FLASH_PAUSE; - led_active = 0; - } -+ -+ spin_unlock(&np->led_lock); - } - - static void -@@ -1786,19 +1710,25 @@ - #else - LED_NETWORK_SET(LED_OFF); - #endif -- } -- else if (light_leds) { -+ } else if (light_leds) { - if (current_speed == 10) { - LED_NETWORK_SET(LED_ORANGE); - } else { - LED_NETWORK_SET(LED_GREEN); - } -- } -- else { -+ } else { - LED_NETWORK_SET(LED_OFF); - } - } - -+#ifdef CONFIG_NET_POLL_CONTROLLER -+static void -+e100_netpoll(struct net_device* netdev) -+{ -+ e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL); -+} -+#endif -+ - static int - etrax_init_module(void) - { -diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v32.c linux-2.6.19.2.dev/drivers/net/cris/eth_v32.c ---- linux-2.6.19.2.orig/drivers/net/cris/eth_v32.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/net/cris/eth_v32.c 2007-02-06 11:10:37.000000000 +0100 -@@ -0,0 +1,2305 @@ -+/* -+ * Driver for the ETRAX FS network controller. -+ * -+ * Copyright (c) 2003-2006 Axis Communications AB. -+ */ -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include /* LED_* I/O functions */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "eth_v32.h" -+ -+#define DEBUG(x) -+#define GET_BIT(bit,val) (((val) >> (bit)) & 0x01) -+ -+/* Toggle network LEDs on/off at runtime */ -+static int use_network_leds = 1; -+ -+static void update_rx_stats(struct crisv32_ethernet_local *np); -+static void update_tx_stats(struct crisv32_ethernet_local *np); -+static void crisv32_eth_setup_controller(struct net_device *dev); -+static int crisv32_eth_request_irqdma(struct net_device *dev); -+static void crisv32_eth_init_rings(struct net_device *dev); -+static void crisv32_eth_reset_rings(struct net_device *dev); -+static void crisv32_ethernet_bug(struct net_device *dev); -+ -+/* -+ * The name of the card. Is used for messages and in the requests for -+ * io regions, irqs and dma channels. -+ */ -+static const char *cardname = "ETRAX FS built-in ethernet controller"; -+ -+static int autoneg_normal = 1; -+ -+/* Some chipset needs special care. */ -+struct transceiver_ops transceivers[] = { -+ {0x1018, broadcom_check_speed, broadcom_check_duplex}, -+ /* TDK 2120 and TDK 2120C */ -+ {0xC039, tdk_check_speed, tdk_check_duplex}, -+ {0x039C, tdk_check_speed, tdk_check_duplex}, -+ /* Intel LXT972A*/ -+ {0x04de, intel_check_speed, intel_check_duplex}, -+ /* National Semiconductor DP83865 */ -+ {0x0017, national_check_speed, national_check_duplex}, -+ /* Generic, must be last. */ -+ {0x0000, generic_check_speed, generic_check_duplex} -+}; -+ -+static struct net_device *crisv32_dev[2]; -+static struct crisv32_eth_leds *crisv32_leds[3]; -+ -+#ifdef CONFIG_CPU_FREQ -+static int -+crisv32_ethernet_freq_notifier(struct notifier_block *nb, unsigned long val, -+ void *data); -+ -+static struct notifier_block crisv32_ethernet_freq_notifier_block = { -+ .notifier_call = crisv32_ethernet_freq_notifier -+}; -+#endif -+ -+/* -+ * mask in and out tx/rx interrupts. -+ */ -+static inline void crisv32_disable_tx_ints(struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_no }; -+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx); -+} -+ -+static inline void crisv32_enable_tx_ints(struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_yes }; -+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx); -+} -+ -+static inline void crisv32_disable_rx_ints(struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_no }; -+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx); -+} -+ -+static inline void crisv32_enable_rx_ints(struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_yes }; -+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx); -+} -+ -+/* start/stop receiver */ -+static inline void crisv32_start_receiver(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rw_rec_ctrl rec_ctrl; -+ -+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.ma0 = regk_eth_yes; -+ rec_ctrl.broadcast = regk_eth_rec; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+} -+ -+static inline void crisv32_stop_receiver(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rw_rec_ctrl rec_ctrl; -+ -+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.ma0 = regk_eth_no; -+ rec_ctrl.broadcast = regk_eth_discard; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+} -+ -+static int __init -+crisv32_eth_request_irqdma(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Allocate IRQs and DMAs. */ -+ if (np->eth_inst == regi_eth0) { -+ if (request_irq(DMA0_INTR_VECT, crisv32tx_eth_interrupt, -+ 0, cardname, dev)) { -+ return -EAGAIN; -+ } -+ -+ if (request_irq(DMA1_INTR_VECT, crisv32rx_eth_interrupt, -+ IRQF_SAMPLE_RANDOM, cardname, dev)) { -+ goto err0_1; -+ } -+ -+ if (crisv32_request_dma(0, cardname, DMA_VERBOSE_ON_ERROR, -+ 12500000, dma_eth0)) -+ goto err0_2; -+ -+ if (crisv32_request_dma(1, cardname, DMA_VERBOSE_ON_ERROR, -+ 12500000, dma_eth0)) -+ goto err0_3; -+ -+ if (request_irq(ETH0_INTR_VECT, crisv32nw_eth_interrupt, 0, -+ cardname, dev)) { -+ crisv32_free_dma(1); -+ err0_3: -+ crisv32_free_dma(0); -+ err0_2: -+ free_irq(DMA1_INTR_VECT, dev); -+ err0_1: -+ free_irq(DMA0_INTR_VECT, dev); -+ return -EAGAIN; -+ } -+ } else { -+ if (request_irq(DMA6_INTR_VECT, crisv32tx_eth_interrupt, -+ 0, cardname, dev)) -+ return -EAGAIN; -+ -+ if (request_irq(DMA7_INTR_VECT, crisv32rx_eth_interrupt, -+ IRQF_SAMPLE_RANDOM, cardname, dev)) -+ goto err1_1; -+ -+ if (crisv32_request_dma(6, cardname, DMA_VERBOSE_ON_ERROR, -+ 0, dma_eth1)) -+ goto err1_2; -+ -+ if (crisv32_request_dma(7, cardname, DMA_VERBOSE_ON_ERROR, -+ 0, dma_eth1)) -+ goto err1_3; -+ -+ if (request_irq(ETH1_INTR_VECT, crisv32nw_eth_interrupt, 0, -+ cardname, dev)) { -+ crisv32_free_dma(7); -+ err1_3: -+ crisv32_free_dma(6); -+ err1_2: -+ free_irq(DMA7_INTR_VECT, dev); -+ err1_1: -+ free_irq(DMA6_INTR_VECT, dev); -+ return -EAGAIN; -+ } -+ } -+ return 0; -+} -+ -+static void __init -+crisv32_eth_setup_controller(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ reg_config_rw_pad_ctrl pad_ctrl; -+ -+ reg_eth_rw_tr_ctrl tr_ctrl = { -+ .retry = regk_eth_yes, -+ .pad = regk_eth_yes, -+ .crc = regk_eth_yes -+ }; -+ -+ reg_eth_rw_rec_ctrl rec_ctrl = { -+ .ma0 = regk_eth_no, /* enable at open() */ -+ .broadcast = regk_eth_no, -+ .max_size = regk_eth_size1522 -+ }; -+ -+ reg_eth_rw_ga_lo ga_lo = { 0 }; -+ reg_eth_rw_ga_hi ga_hi = { 0 }; -+ -+ reg_eth_rw_gen_ctrl gen_ctrl = { -+ .phy = regk_eth_mii_clk, -+ .flow_ctrl = regk_eth_yes -+ }; -+ -+ /* -+ * Initialize group address registers to make sure that no -+ * unwanted addresses are matched. -+ */ -+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo); -+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi); -+ -+ /* Configure receiver and transmitter */ -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl); -+ -+ /* Enable ethernet controller with mii clk. */ -+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); -+ gen_ctrl.en = regk_eth_yes; -+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); -+ -+ /* keep reset low (RESET_LEN) */ -+ udelay(500); -+ -+ /* done */ -+ pad_ctrl = REG_RD(config, regi_config, rw_pad_ctrl); -+ pad_ctrl.phyrst_n = 1; -+ REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl); -+ -+ /* Let the PHY reset (RESET_WAIT) */ -+ udelay(200); -+ -+ crisv32_eth_probe_transceiver(dev); -+} -+ -+static void __init -+crisv32_eth_init_rings(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int i; -+ -+ /* Initialise receive descriptors for interface. */ -+ for (i = 0; i < NBR_RX_DESC; i++) { -+ struct sk_buff *skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); -+ -+ np->dma_rx_descr_list[i].skb = skb; -+ np->dma_rx_descr_list[i].descr.buf = -+ (char*)virt_to_phys(skb->data); -+ np->dma_rx_descr_list[i].descr.after = -+ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE); -+ -+ np->dma_rx_descr_list[i].descr.eol = 0; -+ np->dma_rx_descr_list[i].descr.in_eop = 0; -+ np->dma_rx_descr_list[i].descr.next = -+ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr); -+ } -+ /* bend the list into a ring */ -+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next = -+ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr); -+ -+ /* Initialize transmit descriptors. */ -+ for (i = 0; i < NBR_TX_DESC; i++) { -+ np->dma_tx_descr_list[i].descr.wait = 1; -+ np->dma_tx_descr_list[i].descr.eol = 0; -+ np->dma_tx_descr_list[i].descr.out_eop = 0; -+ np->dma_tx_descr_list[i].descr.next = -+ (void*)virt_to_phys(&np->dma_tx_descr_list[i+1].descr); -+ } -+ /* bend the list into a ring */ -+ np->dma_tx_descr_list[NBR_TX_DESC - 1].descr.next = -+ (void *) virt_to_phys(&np->dma_tx_descr_list[0].descr); -+ -+ crisv32_eth_reset_rings(dev); -+} -+ -+static void -+crisv32_eth_reset_rings(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int i; -+ -+ /* free un-handled tx packets */ -+ while(np->txpackets -+ || np->catch_tx_desc != np->active_tx_desc) { -+ np->txpackets--; -+ if (np->catch_tx_desc->skb) -+ dev_kfree_skb(np->catch_tx_desc->skb); -+ -+ np->catch_tx_desc->skb = 0; -+ np->catch_tx_desc = -+ phys_to_virt((int)np->catch_tx_desc->descr.next); -+ } while (np->catch_tx_desc != np->active_tx_desc); -+ WARN_ON(np->txpackets != 0); -+ np->txpackets = 0; -+ -+ /* cleanup the rx-ring */ -+ for (i = 0; i < NBR_RX_DESC; i++) { -+ struct sk_buff *skb; -+ skb = np->dma_rx_descr_list[i].skb; -+ if (!skb -+ || (np->dma_rx_descr_list[i].descr.buf != -+ (void *)virt_to_phys(skb->data))) -+ { -+ printk("%s:%d: damaged rx-ring! " -+ "i=%d skb=%p %lx %lx %p %p\n", -+ __func__, __LINE__, i, -+ skb, -+ virt_to_phys(skb->data), -+ virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE), -+ np->dma_rx_descr_list[i].descr.buf, -+ np->dma_rx_descr_list[i].descr.after); -+ WARN_ON(1); -+ crisv32_ethernet_bug(dev); -+ if (skb) -+ dev_kfree_skb(skb); -+ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); -+ np->dma_rx_descr_list[i].skb = skb; -+ np->dma_rx_descr_list[i].descr.buf = -+ (char*)virt_to_phys(skb->data); -+ } -+ np->dma_rx_descr_list[i].descr.after = -+ (char*)virt_to_phys(skb->data -+ + MAX_MEDIA_DATA_SIZE); -+ np->dma_rx_descr_list[i].descr.eol = 0; -+ np->dma_rx_descr_list[i].descr.in_eop = 0; -+ /* Workaround cache bug */ -+ flush_dma_descr(&np->dma_rx_descr_list[i].descr, 1); -+ } -+ -+ /* reset rx-ring */ -+ np->active_rx_desc = &np->dma_rx_descr_list[0]; -+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1]; -+ np->last_rx_desc = np->prev_rx_desc; -+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1; -+ -+ /* reset tx-ring */ -+ np->dma_tx_descr_list[0].descr.buf = -+ np->dma_tx_descr_list[0].descr.after = 0; -+ np->dma_rx_descr_list[i].descr.in_eop = 0; -+ np->dma_tx_descr_list[0].descr.eol = 1; -+ -+ np->active_tx_desc = &np->dma_tx_descr_list[0]; -+ np->prev_tx_desc = &np->dma_tx_descr_list[NBR_TX_DESC - 1]; -+ np->catch_tx_desc = &np->dma_tx_descr_list[0]; -+ -+ /* Fill context descriptors. */ -+ np->ctxt_in.next = 0; -+ np->ctxt_in.saved_data = -+ (void *)virt_to_phys(&np->active_rx_desc->descr); -+ np->ctxt_in.saved_data_buf = np->active_rx_desc->descr.buf; -+ -+ np->ctxt_out.next = 0; -+ np->ctxt_out.saved_data = -+ (void *)virt_to_phys(&np->dma_tx_descr_list[0].descr); -+} -+ -+static void __init -+crisv32_init_leds(int ledgrp, struct net_device* dev) -+{ -+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0); -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Use already allocated led grp if initialized */ -+ if (crisv32_leds[ledgrp] != NULL) { -+ np->leds = crisv32_leds[ledgrp]; -+ return; -+ } -+ -+ crisv32_leds[ledgrp] = kmalloc(sizeof(struct crisv32_eth_leds),GFP_KERNEL); -+ -+ crisv32_leds[ledgrp]->ledgrp = ledgrp; -+ crisv32_leds[ledgrp]->led_active = 0; -+ /* NOTE: Should this value be set to zero as the jiffies timer can wrap? */ -+ crisv32_leds[ledgrp]->led_next_time = jiffies; -+ -+ crisv32_leds[ledgrp]->clear_led_timer = timer_init; -+ crisv32_leds[ledgrp]->clear_led_timer.function = crisv32_clear_network_leds; -+ crisv32_leds[ledgrp]->clear_led_timer.data = (unsigned long) dev; -+ -+ spin_lock_init(&crisv32_leds[ledgrp]->led_lock); -+ -+ np->leds = crisv32_leds[ledgrp]; -+} -+ -+static int __init -+crisv32_ethernet_init(void) -+{ -+ struct crisv32_ethernet_local *np; -+ int ret = 0; -+ -+ printk("ETRAX FS 10/100MBit ethernet v0.01 (c)" -+ " 2003 Axis Communications AB\n"); -+ -+#ifdef CONFIG_ETRAX_ETHERNET_IFACE0 -+{ -+ int iface0 = 0; -+ /* Default MAC address for interface 0. -+ * The real one will be set later. */ -+ static struct sockaddr default_mac_iface0 = -+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00}}; -+ -+ if (!(crisv32_dev[iface0] = alloc_etherdev(sizeof *np))) -+ return -ENOMEM; -+ -+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface0]); -+ -+#if defined(CONFIG_ETRAX_ETH0_USE_LEDGRP0) -+ crisv32_init_leds(LED_GRP_0,crisv32_dev[iface0]); -+#elif defined(CONFIG_ETRAX_ETH0_USE_LEDGRP1) -+ crisv32_init_leds(LED_GRP_1,crisv32_dev[iface0]); -+#else -+ crisv32_init_leds(LED_GRP_NONE,crisv32_dev[iface0]); -+#endif -+ -+ np = (struct crisv32_ethernet_local *) crisv32_dev[iface0]->priv; -+ np->eth_inst = regi_eth0; -+ np->dma_out_inst = regi_dma0; -+ np->dma_in_inst = regi_dma1; -+ -+ register_netdev(crisv32_dev[iface0]); -+ -+ /* Set up default MAC address */ -+ memcpy(crisv32_dev[iface0]->dev_addr, default_mac_iface0.sa_data, 6); -+ crisv32_eth_set_mac_address(crisv32_dev[iface0], &default_mac_iface0); -+ if (crisv32_eth_request_irqdma(crisv32_dev[iface0])) -+ printk("%s: eth0 unable to allocate IRQ and DMA resources\n", -+ __func__); -+ np->txpackets = 0; -+ crisv32_eth_init_rings(crisv32_dev[iface0]); -+ crisv32_eth_setup_controller(crisv32_dev[iface0]); -+} -+#endif /* CONFIG_ETRAX_ETHERNET_IFACE0 */ -+ -+#ifdef CONFIG_ETRAX_ETHERNET_IFACE1 -+{ -+ int iface1 = 0; -+ /* Default MAC address for interface 1. -+ * The real one will be set later. */ -+ static struct sockaddr default_mac_iface1 = -+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x01}}; -+ -+ if (crisv32_pinmux_alloc_fixed(pinmux_eth1)) -+ panic("Eth pinmux\n"); -+ -+ /* Increase index to device array if interface 0 is enabled as well.*/ -+#ifdef CONFIG_ETRAX_ETHERNET_IFACE0 -+ iface1++; -+#endif -+ if (!(crisv32_dev[iface1] = alloc_etherdev(sizeof *np))) -+ return -ENOMEM; -+ -+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface1]); -+ -+#if defined(CONFIG_ETRAX_ETH1_USE_LEDGRP0) -+ crisv32_init_leds(LED_GRP_0,crisv32_dev[iface1]); -+#elif defined(CONFIG_ETRAX_ETH1_USE_LEDGRP1) -+ crisv32_init_leds(LED_GRP_1,crisv32_dev[iface1]); -+#else -+ crisv32_init_leds(LED_GRP_NONE,crisv32_dev[iface1]); -+#endif -+ -+ np = (struct crisv32_ethernet_local *) crisv32_dev[iface1]->priv; -+ np->eth_inst = regi_eth1; -+ np->dma_out_inst = regi_dma6; -+ np->dma_in_inst = regi_dma7; -+ -+ register_netdev(crisv32_dev[iface1]); -+ -+ /* Set up default MAC address */ -+ memcpy(crisv32_dev[iface1]->dev_addr, default_mac_iface1.sa_data, 6); -+ crisv32_eth_set_mac_address(crisv32_dev[iface1], &default_mac_iface1); -+ -+ if (crisv32_eth_request_irqdma(crisv32_dev[iface1])) -+ printk("%s: eth1 unable to allocate IRQ and DMA resources\n", -+ __func__); -+ np->txpackets = 0; -+ crisv32_eth_init_rings(crisv32_dev[iface1]); -+ crisv32_eth_setup_controller(crisv32_dev[iface1]); -+} -+#endif /* CONFIG_ETRAX_ETHERNET_IFACE1 */ -+ -+#ifdef CONFIG_CPU_FREQ -+ cpufreq_register_notifier(&crisv32_ethernet_freq_notifier_block, -+ CPUFREQ_TRANSITION_NOTIFIER); -+#endif -+ -+ return ret; -+} -+ -+static int __init -+crisv32_ethernet_device_init(struct net_device* dev) -+{ -+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0); -+ struct crisv32_ethernet_local *np; -+ -+ dev->base_addr = 0; /* Just to have something to show. */ -+ -+ /* we do our own locking */ -+ dev->features |= NETIF_F_LLTX; -+ -+ /* We use several IRQs and DMAs so just report 0 here. */ -+ dev->irq = 0; -+ dev->dma = 0; -+ -+ /* -+ * Fill in our handlers so the network layer can talk to us in the -+ * future. -+ */ -+ dev->open = crisv32_eth_open; -+ dev->hard_start_xmit = crisv32_eth_send_packet; -+ dev->stop = crisv32_eth_close; -+ dev->get_stats = crisv32_get_stats; -+ dev->set_multicast_list = crisv32_eth_set_multicast_list; -+ dev->set_mac_address = crisv32_eth_set_mac_address; -+ dev->ethtool_ops = &crisv32_ethtool_ops; -+ dev->do_ioctl = crisv32_eth_ioctl; -+ dev->set_config = crisv32_eth_set_config; -+ dev->tx_timeout = crisv32_eth_tx_timeout; -+#ifdef CONFIG_NET_POLL_CONTROLLER -+ dev->poll_controller = crisv32_netpoll; -+#endif -+ -+ np = netdev_priv(dev); -+ -+ spin_lock_init(&np->lock); -+ spin_lock_init(&np->transceiver_lock); -+ -+ /* Initialize speed indicator stuff. */ -+ np->current_speed = 10; -+ np->current_speed_selection = 0; /* Auto. */ -+ np->speed_timer = timer_init; -+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; -+ np->speed_timer.data = (unsigned long) dev; -+ np->speed_timer.function = crisv32_eth_check_speed; -+ -+ np->full_duplex = 0; -+ np->current_duplex = autoneg; -+ np->duplex_timer = timer_init; -+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; -+ np->duplex_timer.data = (unsigned long) dev; -+ np->duplex_timer.function = crisv32_eth_check_duplex; -+ -+ return 0; -+} -+ -+static int -+crisv32_eth_open(struct net_device *dev) -+{ -+ struct sockaddr mac_addr; -+ reg_dma_rw_ack_intr ack_intr = { .data = 1,.in_eop = 1 }; -+ reg_dma_rw_cfg dma_cfg = { .en = 1 }; -+ reg_eth_rw_clr_err clr_err = {.clr = regk_eth_yes}; -+ int intr_mask_nw = 0x1cff; -+ int eth_ack_intr = 0xffff; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->lock); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ np->gigabit_mode = 0; -+#endif -+ crisv32_disable_tx_ints(np); -+ crisv32_disable_rx_ints(np); -+ -+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err); -+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, eth_ack_intr); -+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw); -+ crisv32_eth_reset_rings(dev); -+ -+ /* Give the hardware an idea of what MAC address we want. */ -+ memcpy(mac_addr.sa_data, dev->dev_addr, dev->addr_len); -+ crisv32_eth_set_mac_address(dev, &mac_addr); -+ -+ /* Enable irq and make sure that the irqs are cleared. */ -+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr); -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ -+ /* Prepare input DMA. */ -+ DMA_RESET(np->dma_in_inst); -+ DMA_ENABLE(np->dma_in_inst); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2); -+#endif -+ DMA_START_CONTEXT( np->dma_in_inst, virt_to_phys(&np->ctxt_in)); -+ DMA_CONTINUE(np->dma_in_inst); -+ crisv32_enable_rx_ints(np); -+ crisv32_start_receiver(np); -+ -+ /* Prepare output DMA. */ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4); -+#endif -+ REG_WR(dma, np->dma_out_inst, rw_cfg, dma_cfg); -+ netif_start_queue(dev); -+ crisv32_enable_tx_ints(np); -+ -+ /* Start duplex/speed timers */ -+ add_timer(&np->speed_timer); -+ add_timer(&np->duplex_timer); -+ -+ spin_unlock(&np->lock); -+ /* -+ * We are now ready to accept transmit requeusts from the queueing -+ * layer of the networking. -+ */ -+ netif_carrier_on(dev); -+ -+ return 0; -+} -+ -+static int -+crisv32_eth_close(struct net_device *dev) -+{ -+ reg_dma_rw_ack_intr ack_intr = {0}; -+ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ unsigned long flags; -+ -+ printk(KERN_INFO "Closing %s.\n", dev->name); -+ -+ /* stop the receiver before the DMA channels to avoid overruns. */ -+ crisv32_stop_receiver(np); -+ -+ spin_lock_irqsave(&np->lock, flags); -+ netif_stop_queue(dev); -+ -+ /* Reset the TX DMA in case it has hung on something. */ -+ DMA_RESET(np->dma_in_inst); -+ -+ /* Stop DMA */ -+ DMA_STOP(np->dma_in_inst); -+ DMA_STOP(np->dma_out_inst); -+ -+ /* Disable irq and make sure that the irqs are cleared. */ -+ crisv32_disable_tx_ints(np); -+ ack_intr.data = 1; -+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr); -+ -+ crisv32_disable_rx_ints(np); -+ ack_intr.in_eop = 1; -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ -+ np->sender_started = 0; -+ spin_unlock_irqrestore(&np->lock, flags); -+ -+ /* Update the statistics. */ -+ update_rx_stats(np); -+ update_tx_stats(np); -+ -+ /* Stop speed/duplex timers */ -+ del_timer(&np->speed_timer); -+ del_timer(&np->duplex_timer); -+ -+ return 0; -+} -+ -+static int -+crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr) -+{ -+ int i; -+ unsigned char *addr = ((struct sockaddr*)vpntr)->sa_data; -+ -+ reg_eth_rw_ma0_lo ma0_lo = -+ { addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24)}; -+ -+ reg_eth_rw_ma0_hi ma0_hi = { addr[4] | (addr[5] << 8) }; -+ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Remember the address. */ -+ memcpy(dev->dev_addr, addr, dev->addr_len); -+ -+ /* -+ * Write the address to the hardware. -+ * Note the way the address is wrapped: -+ * ma0_l0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24); -+ * ma0_hi = a0_4 | (a0_5 << 8); -+ */ -+ REG_WR(eth, np->eth_inst, rw_ma0_lo, ma0_lo); -+ REG_WR(eth, np->eth_inst, rw_ma0_hi, ma0_hi); -+ -+ printk(KERN_INFO "%s: changed MAC to ", dev->name); -+ -+ for (i = 0; i < 5; i++) -+ printk("%02X:", dev->dev_addr[i]); -+ -+ printk("%02X\n", dev->dev_addr[i]); -+ -+ return 0; -+} -+ -+static irqreturn_t -+crisv32rx_eth_interrupt(int irq, void *dev_id) -+{ -+ reg_dma_r_masked_intr masked_in; -+ reg_dma_rw_cmd cmd = {0}; -+ reg_dma_rw_ack_intr ack_intr = {0}; -+ struct net_device *dev = (struct net_device *) dev_id; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ masked_in = REG_RD(dma, np->dma_in_inst, r_masked_intr); -+ -+ if (masked_in.in_eop) { -+ DEBUG(printk("EOP_IN interrupt\n")); -+ -+ /* Acknowledge input dma interrupt. */ -+ ack_intr.in_eop = 1; -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ -+ np->new_rx_package = 1; -+ /* Check if complete packets were indeed received. */ -+ while (np->active_rx_desc->descr.in_eop == 1 -+ && np->new_rx_package) { -+ /* -+ * Take out the buffer and give it to the OS, then -+ * allocate a new buffer to put a packet in. -+ */ -+ crisv32_eth_receive_packet(dev); -+ -+ /* Update number of packets received. */ -+ np->stats.rx_packets++; -+ -+ /* Restarts input dma. */ -+ cmd.cont_data = 1; -+ REG_WR(dma, np->dma_in_inst, rw_cmd, cmd); -+ -+ /* Acknowledge input dma interrupt. */ -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ } -+ } -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t -+crisv32tx_eth_interrupt(int irq, void *dev_id) -+{ -+ reg_dma_rw_stat stat; -+ dma_descr_data *dma_pos; -+ reg_dma_rw_ack_intr ack_intr = { .data = 1 }; -+ reg_dma_r_masked_intr masked_out; -+ -+ struct net_device *dev = (struct net_device *) dev_id; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ unsigned long flags; -+ -+ masked_out = REG_RD(dma, np->dma_out_inst, r_masked_intr); -+ -+ /* Get the current output dma position. */ -+ stat = REG_RD(dma, np->dma_out_inst, rw_stat); -+ if (stat.list_state == regk_dma_data_at_eol) -+ dma_pos = &np->active_tx_desc->descr; -+ else -+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, -+ rw_data)); -+ -+ /* ack the interrupt */ -+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr); -+ -+ /* protect against ethernet excessive-col interrupts */ -+ spin_lock_irqsave(&np->lock, flags); -+ -+ /* Take care of transmited dma descriptors and report sent packet. */ -+ while (np->txpackets && ((&np->catch_tx_desc->descr != dma_pos) -+ || netif_queue_stopped(dev))) { -+ /* Update sent packet statistics. */ -+ np->stats.tx_bytes += np->catch_tx_desc->skb->len; -+ np->stats.tx_packets++; -+ -+ dev_kfree_skb_irq(np->catch_tx_desc->skb); -+ np->catch_tx_desc->skb = 0; -+ np->txpackets--; -+ np->catch_tx_desc = -+ phys_to_virt((int)np->catch_tx_desc->descr.next); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ if (np->gigabit_mode) { -+ np->intmem_tx_buf_catch->free = 1; -+ np->intmem_tx_buf_catch = np->intmem_tx_buf_catch->next; -+ } -+#endif -+ netif_wake_queue(dev); -+ } -+ spin_unlock_irqrestore(&np->lock, flags); -+ return IRQ_HANDLED; -+} -+ -+ -+/* Update receive errors. */ -+static void -+update_rx_stats(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rs_rec_cnt r; -+ reg_eth_rs_phy_cnt rp; -+ -+ r = REG_RD(eth, np->eth_inst, rs_rec_cnt); -+ rp = REG_RD(eth, np->eth_inst, rs_phy_cnt); -+ -+ np->stats.rx_fifo_errors += r.congestion; -+ np->stats.rx_crc_errors += r.crc_err; -+ np->stats.rx_frame_errors += r.align_err; -+ np->stats.rx_length_errors += r.oversize; -+} -+ -+/* Update transmit errors. */ -+static void -+update_tx_stats(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rs_tr_cnt r; -+ -+ r = REG_RD(eth, np->eth_inst, rs_tr_cnt); -+ -+ np->stats.collisions += r.single_col + r.mult_col; -+ np->stats.tx_errors += r.deferred; -+} -+ -+/* Get current statistics. */ -+static struct net_device_stats * -+crisv32_get_stats(struct net_device *dev) -+{ -+ unsigned long flags; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ spin_lock_irqsave(&np->lock, flags); -+ -+ update_rx_stats(np); -+ update_tx_stats(np); -+ -+ spin_unlock_irqrestore(&np->lock, flags); -+ -+ return &np->stats; -+} -+ -+/* Check for network errors. This acknowledge the received interrupt. */ -+static irqreturn_t -+crisv32nw_eth_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *) dev_id; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ reg_eth_r_masked_intr intr_mask; -+ int ack_intr = 0xffff; -+ reg_eth_rw_clr_err clr_err; -+ -+ intr_mask = REG_RD(eth, np->eth_inst, r_masked_intr); -+ -+ /* -+ * Check for underrun and/or excessive collisions. Note that the -+ * rw_clr_err register clears both underrun and excessive collision -+ * errors, so there's no need to check them separately. -+ */ -+ if (np->sender_started -+ && (intr_mask.urun || intr_mask.exc_col)) { -+ unsigned long flags; -+ dma_descr_data *dma_pos; -+ reg_dma_rw_stat stat; -+ -+ /* Get the current output dma position. */ -+ stat = REG_RD(dma, np->dma_out_inst, rw_stat); -+ if (stat.list_state == regk_dma_data_at_eol) -+ dma_pos = &np->active_tx_desc->descr; -+ else -+ dma_pos = phys_to_virt(REG_RD_INT(dma, -+ np->dma_out_inst, -+ rw_data)); -+ -+ /* -+ * Protect against the tx-interrupt messing with -+ * the tx-ring. -+ */ -+ spin_lock_irqsave(&np->lock, flags); -+ /* -+ * If we have more than one packet in the tx-ring -+ * drop one and move ahead. Upper layers rely on -+ * packeloss when doing congestion control. -+ */ -+ if (intr_mask.exc_col && np->txpackets > 1) { -+ dev_kfree_skb_irq(np->catch_tx_desc->skb); -+ np->catch_tx_desc->skb = 0; -+ np->catch_tx_desc = -+ phys_to_virt((int) -+ np->catch_tx_desc->descr.next); -+ np->txpackets--; -+ netif_wake_queue(dev); -+ } -+ np->ctxt_out.next = 0; -+ if (np->txpackets) { -+ np->ctxt_out.saved_data = (void *) -+ virt_to_phys(&np->catch_tx_desc->descr); -+ np->ctxt_out.saved_data_buf = -+ np->catch_tx_desc->descr.buf; -+ -+ /* restart the DMA */ -+ DMA_START_CONTEXT(np->dma_out_inst, -+ (int) virt_to_phys(&np->ctxt_out)); -+ } -+ else { -+ /* let the next packet restart the DMA */ -+ np->ctxt_out.saved_data = (void *) -+ virt_to_phys(&np->active_tx_desc->descr); -+ np->sender_started = 0; -+ } -+ -+ spin_unlock_irqrestore(&np->lock, flags); -+ np->stats.tx_errors++; -+ } -+ -+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr); -+ clr_err.clr = 1; -+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err); -+ -+ update_rx_stats(np); -+ update_tx_stats(np); -+ -+ return IRQ_HANDLED; -+} -+ -+/* We have a good packet(s), get it/them out of the buffers. */ -+static void -+crisv32_eth_receive_packet(struct net_device *dev) -+{ -+ int length; -+ struct sk_buff *skb; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ struct sk_buff *tmp; -+ unsigned long flags; -+ -+ DEBUG(printk("crisv32_receive_packet\n")); -+ -+ /* Activate LED */ -+ spin_lock_irqsave(&np->leds->led_lock, flags); -+ if (!np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) { -+ /* light the network leds depending on the current speed. */ -+ crisv32_set_network_leds(LED_ACTIVITY, dev); -+ -+ /* Set the earliest time we may clear the LED */ -+ np->leds->led_next_time = jiffies + NET_FLASH_TIME; -+ np->leds->led_active = 1; -+ np->leds->clear_led_timer.data = (unsigned long) dev; -+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10); -+ } -+ spin_unlock_irqrestore(&np->leds->led_lock, flags); -+ -+ /* Discard CRC (4 bytes). */ -+ length = (np->active_rx_desc->descr.after) - -+ (np->active_rx_desc->descr.buf) - 4; -+ -+ /* Update received packet statistics. */ -+ np->stats.rx_bytes += length; -+ -+ if (np->active_rx_desc != np->last_rx_desc) { -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ if (np->gigabit_mode) { -+ skb = dev_alloc_skb(length); -+ if(!skb) { -+ np->stats.rx_errors++; -+ printk(KERN_NOTICE "%s: memory squeeze," -+ " dropping packet.", dev->name); -+ return; -+ } -+ /* Allocate room for the packet body. */ -+ skb_put(skb, length - ETHER_HEAD_LEN); -+ /* Allocate room for the header and copy the data to -+ * the SKB */ -+ memcpy(skb_push(skb, ETHER_HEAD_LEN), -+ crisv32_intmem_phys_to_virt((unsigned long)np->active_rx_desc->descr.buf), length); -+ skb->dev = dev; -+ skb->protocol = eth_type_trans(skb, dev); -+ skb->ip_summed = CHECKSUM_NONE; -+ /* Send the packet to the upper layer. */ -+ netif_rx(skb); -+ np->last_rx_desc = -+ (void *) phys_to_virt(np->last_rx_desc->descr.next); -+ } else { -+#endif -+ tmp = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); -+ if (!tmp) { -+ np->stats.rx_errors++; -+ printk(KERN_NOTICE "%s: memory squeeze," -+ " dropping packet.", -+ dev->name); -+ return; -+ } -+ skb = np->active_rx_desc->skb; -+ np->active_rx_desc->skb = tmp; -+ skb_put(skb, length); -+ -+ np->active_rx_desc->descr.buf = -+ (void *) virt_to_phys(np->active_rx_desc->skb->data); -+ np->active_rx_desc->descr.after = -+ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE; -+ -+ skb->dev = dev; -+ skb->protocol = eth_type_trans(skb, dev); -+ skb->ip_summed = CHECKSUM_NONE; -+ -+ /* Send the packet to the upper layer. */ -+ netif_rx(skb); -+ np->last_rx_desc = -+ phys_to_virt((int) -+ np->last_rx_desc->descr.next); -+ } -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ } -+#endif -+ /* -+ * When the input DMA reaches eol precaution must be taken, otherwise -+ * the DMA could stop. The problem occurs if the eol flag is re-placed -+ * on the descriptor that the DMA stands on before the DMA proceed to -+ * the next descriptor. This case could, for example, happen if there -+ * is a traffic burst and then the network goes silent. To prevent this -+ * we make sure that we do not set the eol flag on the descriptor that -+ * the DMA stands on. -+ */ -+ if(virt_to_phys(&np->active_rx_desc->descr) != -+ REG_RD_INT(dma, np->dma_in_inst, rw_saved_data)) { -+ np->active_rx_desc->descr.after = -+ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE; -+ np->active_rx_desc->descr.eol = 1; -+ np->active_rx_desc->descr.in_eop = 0; -+ np->active_rx_desc = -+ phys_to_virt((int)np->active_rx_desc->descr.next); -+ barrier(); -+ np->prev_rx_desc->descr.eol = 0; -+ flush_dma_descr(&np->prev_rx_desc->descr, 0); // Workaround cache bug -+ np->prev_rx_desc = -+ phys_to_virt((int)np->prev_rx_desc->descr.next); -+ flush_dma_descr(&np->prev_rx_desc->descr, 1); // Workaround cache bug -+ } else { -+ np->new_rx_package = 0; -+ } -+} -+ -+/* -+ * This function (i.e. hard_start_xmit) is protected from concurent calls by a -+ * spinlock (xmit_lock) in the net_device structure. -+ */ -+static int -+crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ unsigned char *buf = skb->data; -+ unsigned long flags; -+ -+ dev->trans_start = jiffies; -+ -+ spin_lock_irqsave(&np->leds->led_lock, flags); -+ if (!np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) { -+ /* light the network leds depending on the current speed. */ -+ crisv32_set_network_leds(LED_ACTIVITY, dev); -+ -+ /* Set the earliest time we may clear the LED */ -+ np->leds->led_next_time = jiffies + NET_FLASH_TIME; -+ np->leds->led_active = 1; -+ np->leds->clear_led_timer.data = (unsigned long) dev; -+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10); -+ } -+ spin_unlock_irqrestore(&np->leds->led_lock, flags); -+ -+ /* -+ * Need to disable irq to avoid updating pointer in interrupt while -+ * sending packets. -+ */ -+ spin_lock_irqsave(&np->lock, flags); -+ -+ np->active_tx_desc->skb = skb; -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ if (np->gigabit_mode) { -+ if(np->intmem_tx_buf_active->free) { -+ memcpy(np->intmem_tx_buf_active->buf, -+ skb->data, skb->len); -+ np->intmem_tx_buf_active->free = 0; -+ crisv32_eth_hw_send_packet( -+ np->intmem_tx_buf_active->buf, skb->len, np); -+ np->intmem_tx_buf_active = -+ np->intmem_tx_buf_active->next; -+ } else { -+ printk("%s: Internal tx memory buffer not free!\n\r", -+ __FILE__); -+ spin_unlock_irqrestore(&np->lock, flags); -+ return 1; -+ } -+ } -+ else -+#endif -+ { -+ crisv32_eth_hw_send_packet(buf, skb->len, np); -+ } -+ /* Stop queue if full. */ -+ if (np->active_tx_desc == np->catch_tx_desc) -+ netif_stop_queue(dev); -+ -+ np->txpackets++; -+ spin_unlock_irqrestore(&np->lock, flags); -+ -+ return 0; -+} -+ -+ -+static void -+crisv32_eth_hw_send_packet(unsigned char *buf, int length, void *priv) -+{ -+ struct crisv32_ethernet_local *np = -+ (struct crisv32_ethernet_local *) priv; -+ -+ /* Configure the tx dma descriptor. */ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ if (np->gigabit_mode) { -+ np->active_tx_desc->descr.buf = (unsigned char *) crisv32_intmem_virt_to_phys(buf); -+ } else -+#endif -+ { -+ np->active_tx_desc->descr.buf = (unsigned char *) virt_to_phys(buf); -+ } -+ -+ np->active_tx_desc->descr.after = np->active_tx_desc->descr.buf + -+ length; -+ np->active_tx_desc->descr.intr = 1; -+ np->active_tx_desc->descr.out_eop = 1; -+ -+ /* Move eol. */ -+ np->active_tx_desc->descr.eol = 1; -+ np->prev_tx_desc->descr.eol = 0; -+ -+ -+ /* Update pointers. */ -+ np->prev_tx_desc = np->active_tx_desc; -+ np->active_tx_desc = phys_to_virt((int)np->active_tx_desc->descr.next); -+ -+ /* Start DMA. */ -+ crisv32_start_dma_out(np); -+} -+ -+static void -+crisv32_start_dma_out(struct crisv32_ethernet_local* np) -+{ -+ if (!np->sender_started) { -+ /* Start DMA for the first time. */ -+ np->ctxt_out.saved_data_buf = np->prev_tx_desc->descr.buf; -+ REG_WR(dma, np->dma_out_inst, rw_group_down, -+ (int) virt_to_phys(&np->ctxt_out)); -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c); -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst); -+ np->sender_started = 1; -+ } else { -+ DMA_CONTINUE_DATA(np->dma_out_inst); -+ } -+} -+ -+/* -+ * Called by upper layers if they decide it took too long to complete sending -+ * a packet - we need to reset and stuff. -+ */ -+static void -+crisv32_eth_tx_timeout(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ reg_dma_rw_cfg cfg = {0}; -+ reg_dma_rw_stat stat = {0}; -+ unsigned long flags; -+ -+ printk(KERN_WARNING "%s: transmit timed out\n", dev->name); -+ -+ -+ spin_lock_irqsave(&np->lock, flags); -+ crisv32_ethernet_bug(dev); -+ -+ np->txpackets = 0; -+ /* Update error stats. */ -+ np->stats.tx_errors++; -+ -+ /* Reset the TX DMA in case it has hung on something. */ -+ cfg.en = 0; -+ REG_WR(dma, np->dma_out_inst, rw_cfg, cfg); -+ -+ do { -+ stat = REG_RD(dma, np->dma_out_inst, rw_stat); -+ } while (stat.mode != regk_dma_rst); -+ -+ /* Reset the tranceiver. */ -+ crisv32_eth_reset_tranceiver(dev); -+ -+ /* Get rid of the packets that never got an interrupt. */ -+ do { -+ if (np->catch_tx_desc->skb) -+ dev_kfree_skb(np->catch_tx_desc->skb); -+ -+ np->catch_tx_desc->skb = 0; -+ np->catch_tx_desc = -+ phys_to_virt((int)np->catch_tx_desc->descr.next); -+ } while (np->catch_tx_desc != np->active_tx_desc); -+ -+ -+ /* Start output DMA. */ -+ REG_WR(dma, np->dma_out_inst, rw_group_down, -+ (int) virt_to_phys(&np->ctxt_out)); -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c); -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst); -+ spin_unlock_irqrestore(&np->lock, flags); -+ -+ /* Tell the upper layers we're ok again. */ -+ netif_wake_queue(dev); -+} -+ -+/* -+ * Set or clear the multicast filter for this adaptor. -+ * num_addrs == -1 Promiscuous mode, receive all packets -+ * num_addrs == 0 Normal mode, clear multicast list -+ * num_addrs > 0 Multicast mode, receive normal and MC packets, -+ * and do best-effort filtering. -+ */ -+static void -+crisv32_eth_set_multicast_list(struct net_device *dev) -+{ -+ int num_addr = dev->mc_count; -+ unsigned long int lo_bits; -+ unsigned long int hi_bits; -+ reg_eth_rw_rec_ctrl rec_ctrl = {0}; -+ reg_eth_rw_ga_lo ga_lo = {0}; -+ reg_eth_rw_ga_hi ga_hi = {0}; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ if (dev->flags & IFF_PROMISC) { -+ /* Promiscuous mode. */ -+ lo_bits = 0xfffffffful; -+ hi_bits = 0xfffffffful; -+ -+ /* Enable individual receive. */ -+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, -+ rw_rec_ctrl); -+ rec_ctrl.individual = regk_eth_yes; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } else if (dev->flags & IFF_ALLMULTI) { -+ /* Enable all multicasts. */ -+ lo_bits = 0xfffffffful; -+ hi_bits = 0xfffffffful; -+ -+ /* Disable individual receive */ -+ rec_ctrl = -+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.individual = regk_eth_no; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } else if (num_addr == 0) { -+ /* Normal, clear the mc list. */ -+ lo_bits = 0x00000000ul; -+ hi_bits = 0x00000000ul; -+ -+ /* Disable individual receive */ -+ rec_ctrl = -+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.individual = regk_eth_no; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } else { -+ /* MC mode, receive normal and MC packets. */ -+ char hash_ix; -+ struct dev_mc_list *dmi = dev->mc_list; -+ int i; -+ char *baddr; -+ lo_bits = 0x00000000ul; -+ hi_bits = 0x00000000ul; -+ -+ for (i = 0; i < num_addr; i++) { -+ /* Calculate the hash index for the GA registers. */ -+ hash_ix = 0; -+ baddr = dmi->dmi_addr; -+ hash_ix ^= (*baddr) & 0x3f; -+ hash_ix ^= ((*baddr) >> 6) & 0x03; -+ ++baddr; -+ hash_ix ^= ((*baddr) << 2) & 0x03c; -+ hash_ix ^= ((*baddr) >> 4) & 0xf; -+ ++baddr; -+ hash_ix ^= ((*baddr) << 4) & 0x30; -+ hash_ix ^= ((*baddr) >> 2) & 0x3f; -+ ++baddr; -+ hash_ix ^= (*baddr) & 0x3f; -+ hash_ix ^= ((*baddr) >> 6) & 0x03; -+ ++baddr; -+ hash_ix ^= ((*baddr) << 2) & 0x03c; -+ hash_ix ^= ((*baddr) >> 4) & 0xf; -+ ++baddr; -+ hash_ix ^= ((*baddr) << 4) & 0x30; -+ hash_ix ^= ((*baddr) >> 2) & 0x3f; -+ -+ hash_ix &= 0x3f; -+ -+ if (hash_ix > 32) -+ hi_bits |= (1 << (hash_ix - 32)); -+ else -+ lo_bits |= (1 << hash_ix); -+ -+ dmi = dmi->next; -+ } -+ -+ /* Disable individual receive. */ -+ rec_ctrl = -+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.individual = regk_eth_no; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } -+ -+ ga_lo.tbl = (unsigned int) lo_bits; -+ ga_hi.tbl = (unsigned int) hi_bits; -+ -+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo); -+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi); -+} -+ -+static int -+crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -+{ -+ struct mii_ioctl_data *data = if_mii(ifr); -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int old_autoneg; -+ -+ spin_lock(&np->lock); /* Preempt protection */ -+ switch (cmd) { -+ case SIOCGMIIPHY: /* Get PHY address */ -+ data->phy_id = np->mdio_phy_addr; -+ break; -+ case SIOCGMIIREG: /* Read MII register */ -+ data->val_out = crisv32_eth_get_mdio_reg(dev, -+ data->reg_num); -+ break; -+ case SIOCSMIIREG: /* Write MII register */ -+ crisv32_eth_set_mdio_reg(dev, data->reg_num, -+ data->val_in); -+ break; -+ case SET_ETH_ENABLE_LEDS: -+ use_network_leds = 1; -+ break; -+ case SET_ETH_DISABLE_LEDS: -+ use_network_leds = 0; -+ break; -+ case SET_ETH_AUTONEG: -+ old_autoneg = autoneg_normal; -+ autoneg_normal = *(int*)data; -+ if (autoneg_normal != old_autoneg) -+ crisv32_eth_negotiate(dev); -+ break; -+ default: -+ spin_unlock(&np->lock); /* Preempt protection */ -+ return -EINVAL; -+ } -+ spin_unlock(&np->lock); -+ return 0; -+} -+ -+static int crisv32_eth_get_settings(struct net_device *dev, -+ struct ethtool_cmd *ecmd) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ /* What about GMII and 1000xpause? not included in ethtool.h */ -+ ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | -+ SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | -+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full; -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ ecmd->supported |= SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; -+#endif -+ ecmd->port = PORT_TP; -+ ecmd->transceiver = XCVR_EXTERNAL; -+ ecmd->phy_address = np->mdio_phy_addr; -+ ecmd->speed = np->current_speed; -+ ecmd->duplex = np->full_duplex; -+ ecmd->advertising = ADVERTISED_TP; -+ -+ if (np->current_duplex == autoneg && np->current_speed_selection == 0) -+ ecmd->advertising |= ADVERTISED_Autoneg; -+ else { -+ ecmd->advertising |= -+ ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | -+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ ecmd->advertising |= ADVERTISED_1000baseT_Half | -+ ADVERTISED_1000baseT_Full; -+#endif -+ if (np->current_speed_selection == 10) -+ ecmd->advertising &= ~(ADVERTISED_100baseT_Half | -+ ADVERTISED_100baseT_Full | -+ ADVERTISED_1000baseT_Half | -+ ADVERTISED_1000baseT_Full); -+ -+ else if (np->current_speed_selection == 100) -+ ecmd->advertising &= ~(ADVERTISED_10baseT_Half | -+ ADVERTISED_10baseT_Full | -+ ADVERTISED_1000baseT_Half | -+ ADVERTISED_1000baseT_Full); -+ -+ else if (np->current_speed_selection == 1000) -+ ecmd->advertising &= ~(ADVERTISED_10baseT_Half | -+ ADVERTISED_10baseT_Full | -+ ADVERTISED_100baseT_Half | -+ ADVERTISED_100baseT_Full); -+ -+ if (np->current_duplex == half) -+ ecmd->advertising &= ~(ADVERTISED_10baseT_Full | -+ ADVERTISED_100baseT_Full | -+ ADVERTISED_1000baseT_Full); -+ else if (np->current_duplex == full) -+ ecmd->advertising &= ~(ADVERTISED_10baseT_Half | -+ ADVERTISED_100baseT_Half | -+ ADVERTISED_1000baseT_Half); -+ } -+ -+ ecmd->autoneg = AUTONEG_ENABLE; -+ return 0; -+} -+ -+static int crisv32_eth_set_settings(struct net_device *dev, -+ struct ethtool_cmd *ecmd) -+{ -+ if (ecmd->autoneg == AUTONEG_ENABLE) { -+ crisv32_eth_set_duplex(dev, autoneg); -+ crisv32_eth_set_speed(dev, 0); -+ } else { -+ crisv32_eth_set_duplex(dev, ecmd->duplex); -+ crisv32_eth_set_speed(dev, ecmd->speed); -+ } -+ -+ return 0; -+} -+ -+static void crisv32_eth_get_drvinfo(struct net_device *dev, -+ struct ethtool_drvinfo *info) -+{ -+ strncpy(info->driver, "ETRAX FS", sizeof(info->driver) - 1); -+ strncpy(info->version, "$Revision: 1.96 $", sizeof(info->version) - 1); -+ strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1); -+ strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1); -+} -+ -+static int crisv32_eth_nway_reset(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ if (np->current_duplex == autoneg && np->current_speed_selection == 0) -+ crisv32_eth_negotiate(dev); -+ return 0; -+} -+ -+static struct ethtool_ops crisv32_ethtool_ops = { -+ .get_settings = crisv32_eth_get_settings, -+ .set_settings = crisv32_eth_set_settings, -+ .get_drvinfo = crisv32_eth_get_drvinfo, -+ .nway_reset = crisv32_eth_nway_reset, -+ .get_link = ethtool_op_get_link, -+}; -+ -+/* Is this function really needed? Use ethtool instead? */ -+static int -+crisv32_eth_set_config(struct net_device *dev, struct ifmap *map) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->lock); /* Preempt protection */ -+ -+ switch(map->port) { -+ case IF_PORT_UNKNOWN: -+ /* Use autoneg */ -+ crisv32_eth_set_speed(dev, 0); -+ crisv32_eth_set_duplex(dev, autoneg); -+ break; -+ case IF_PORT_10BASET: -+ crisv32_eth_set_speed(dev, 10); -+ crisv32_eth_set_duplex(dev, autoneg); -+ break; -+ case IF_PORT_100BASET: -+ case IF_PORT_100BASETX: -+ crisv32_eth_set_speed(dev, 100); -+ crisv32_eth_set_duplex(dev, autoneg); -+ break; -+ case IF_PORT_100BASEFX: -+ case IF_PORT_10BASE2: -+ case IF_PORT_AUI: -+ spin_unlock(&np->lock); -+ return -EOPNOTSUPP; -+ break; -+ default: -+ printk(KERN_ERR "%s: Invalid media selected", -+ dev->name); -+ spin_unlock(&np->lock); -+ return -EINVAL; -+ } -+ spin_unlock(&np->lock); -+ return 0; -+} -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+/* -+ * Switch the behaviour of the tx and rx buffers using -+ * external or internal memory. Usage of the internal -+ * memory is required for gigabit operation. -+ */ -+static void -+crisv32_eth_switch_intmem_usage(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ int i; -+ reg_dma_rw_stat stat; -+ reg_dma_rw_cfg cfg = {0}; -+ reg_dma_rw_intr_mask intr_mask_in = { .in_eop = regk_dma_yes }; -+ reg_dma_rw_ack_intr ack_intr = { .data = 1,.in_eop = 1 }; -+ unsigned char *intmem_tmp; -+ -+ /* Notify the kernel that the interface has stopped */ -+ netif_stop_queue(dev); -+ -+ /* Stop the receiver DMA */ -+ cfg.en = regk_dma_no; -+ REG_WR(dma, np->dma_in_inst, rw_cfg, cfg); -+ -+ if (!(np->gigabit_mode)) { -+ /* deallocate SKBs in rx_desc */ -+ for (i = 0; i < NBR_RX_DESC; i++) -+ dev_kfree_skb(np->dma_rx_descr_list[i].skb); -+ -+ /* Init TX*/ -+ for(i=0; i < NBR_INTMEM_TX_BUF; i++) { -+ /* Allocate internal memory */ -+ intmem_tmp = NULL; -+ intmem_tmp = crisv32_intmem_alloc(MAX_MEDIA_DATA_SIZE, -+ 32); -+ /* Check that we really got the memory */ -+ if (intmem_tmp == NULL) { -+ printk(KERN_ERR "%s: Can't allocate intmem for" -+ " RX buffer nbr: %d\n", dev->name, i); -+ return; -+ } -+ /* Setup the list entry */ -+ np->tx_intmem_buf_list[i].free = 1; -+ np->tx_intmem_buf_list[i].buf = intmem_tmp; -+ np->tx_intmem_buf_list[i].next = &np->tx_intmem_buf_list[i + 1]; -+ } -+ /* Setup the last list entry */ -+ np->tx_intmem_buf_list[NBR_INTMEM_TX_BUF - 1].next = &np->tx_intmem_buf_list[0]; -+ /* Setup initial pointer */ -+ np->intmem_tx_buf_active = np->tx_intmem_buf_list; -+ np->intmem_tx_buf_catch = np->tx_intmem_buf_list; -+ -+ /* Init RX */ -+ for (i=0; i < NBR_INTMEM_RX_DESC; i++) { -+ /* Allocate internal memory */ -+ intmem_tmp = NULL; -+ intmem_tmp = crisv32_intmem_alloc(MAX_MEDIA_DATA_SIZE, 32); -+ /* Check that we really got the memory */ -+ if (intmem_tmp == NULL) { -+ printk(KERN_ERR "%s: Can't allocate intmem for" -+ " desc nbr: %d\n", dev->name, i); -+ return; -+ } -+ /* Setup the descriptors*/ -+ np->dma_rx_descr_list[i].skb = NULL; -+ np->dma_rx_descr_list[i].descr.buf = -+ (void *) crisv32_intmem_virt_to_phys(intmem_tmp); -+ np->dma_rx_descr_list[i].descr.after = -+ (void *) crisv32_intmem_virt_to_phys(intmem_tmp + MAX_MEDIA_DATA_SIZE); -+ np->dma_rx_descr_list[i].descr.eol = 0; -+ np->dma_rx_descr_list[i].descr.in_eop = 0; -+ np->dma_rx_descr_list[i].descr.next = -+ (void *) virt_to_phys(&np->dma_rx_descr_list[i+1].descr); -+ } -+ /* Setup the last rx descriptor */ -+ np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1].descr.eol = 1; -+ np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1].descr.next = -+ (void*) virt_to_phys(&np->dma_rx_descr_list[0].descr); -+ /* Initialise initial receive pointers. */ -+ np->active_rx_desc = &np->dma_rx_descr_list[0]; -+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1]; -+ np->last_rx_desc = np->prev_rx_desc; -+ -+ np->gigabit_mode = 1; -+ } else { -+ /* dealloc TX intmem */ -+ for(i=0; i < NBR_INTMEM_TX_BUF; i++) -+ crisv32_intmem_free(np->tx_intmem_buf_list[i].buf); -+ -+ /* dealloc RX intmem */ -+ for (i=0; i < NBR_INTMEM_RX_DESC; i++) -+ crisv32_intmem_free(crisv32_intmem_phys_to_virt((unsigned long)np->dma_rx_descr_list[i].descr.buf)); -+ -+ /* Setup new rx_desc and alloc SKBs */ -+ for (i = 0; i < NBR_RX_DESC; i++) { -+ struct sk_buff *skb; -+ -+ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); -+ np->dma_rx_descr_list[i].skb = skb; -+ np->dma_rx_descr_list[i].descr.buf = -+ (char*)virt_to_phys(skb->data); -+ np->dma_rx_descr_list[i].descr.after = -+ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE); -+ -+ np->dma_rx_descr_list[i].descr.eol = 0; -+ np->dma_rx_descr_list[i].descr.in_eop = 0; -+ np->dma_rx_descr_list[i].descr.next = -+ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr); -+ } -+ -+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1; -+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next = -+ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr); -+ -+ /* Initialise initial receive pointers. */ -+ np->active_rx_desc = &np->dma_rx_descr_list[0]; -+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1]; -+ np->last_rx_desc = np->prev_rx_desc; -+ -+ np->gigabit_mode = 0; -+ } -+ -+ /* Fill context descriptors. */ -+ np->ctxt_in.next = 0; -+ np->ctxt_in.saved_data = -+ (dma_descr_data *) virt_to_phys(&np->dma_rx_descr_list[0].descr); -+ np->ctxt_in.saved_data_buf = np->dma_rx_descr_list[0].descr.buf; -+ -+ /* Enable irq and make sure that the irqs are cleared. */ -+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_in); -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ -+ /* Start input dma */ -+ cfg.en = regk_dma_yes; -+ REG_WR(dma, np->dma_in_inst, rw_cfg, cfg); -+ REG_WR(dma, np->dma_in_inst, rw_group_down, -+ (int) virt_to_phys(&np->ctxt_in)); -+ -+ DMA_WR_CMD(np->dma_in_inst, regk_dma_load_c); -+ DMA_WR_CMD(np->dma_in_inst, regk_dma_load_d | regk_dma_burst); -+ -+ netif_wake_queue(dev); -+ -+ stat = REG_RD(dma, np->dma_in_inst, rw_stat); -+} -+#endif -+ -+static void -+crisv32_eth_negotiate(struct net_device *dev) -+{ -+ unsigned short data = -+ crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE); -+ unsigned short ctrl1000 = -+ crisv32_eth_get_mdio_reg(dev, MII_CTRL1000); -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Make all capabilities available */ -+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL | -+ ADVERTISE_100HALF | ADVERTISE_100FULL; -+ ctrl1000 |= ADVERTISE_1000HALF | ADVERTISE_1000FULL; -+ -+ /* Remove the speed capabilities that we that do not want */ -+ switch (np->current_speed_selection) { -+ case 10 : -+ data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL); -+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); -+ break; -+ case 100 : -+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL); -+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); -+ break; -+ case 1000 : -+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL | -+ ADVERTISE_100HALF | ADVERTISE_100FULL); -+ break; -+ } -+ -+ /* Remove the duplex capabilites that we do not want */ -+ if (np->current_duplex == full) { -+ data &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF); -+ ctrl1000 &= ~(ADVERTISE_1000HALF); -+ } -+ else if (np->current_duplex == half) { -+ data &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL); -+ ctrl1000 &= ~(ADVERTISE_1000FULL); -+ } -+ -+ crisv32_eth_set_mdio_reg(dev, MII_ADVERTISE, data); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ crisv32_eth_set_mdio_reg(dev, MII_CTRL1000, ctrl1000); -+#endif -+ -+ /* Renegotiate with link partner */ -+ if (autoneg_normal) { -+ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR); -+ data |= BMCR_ANENABLE | BMCR_ANRESTART; -+ } -+ crisv32_eth_set_mdio_reg(dev, MII_BMCR, data); -+} -+static void -+crisv32_eth_check_speed(unsigned long idev) -+{ -+ static int led_initiated = 0; -+ struct net_device *dev = (struct net_device *) idev; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ unsigned long data; -+ int old_speed; -+ unsigned long flags; -+ -+ BUG_ON(!np); -+ BUG_ON(!np->transceiver); -+ -+ spin_lock(&np->transceiver_lock); -+ -+ old_speed = np->current_speed; -+ data = crisv32_eth_get_mdio_reg(dev, MII_BMSR); -+ -+ if (!(data & BMSR_LSTATUS)) -+ np->current_speed = 0; -+ else -+ np->transceiver->check_speed(dev); -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ if ((old_speed != np->current_speed) -+ && ((old_speed == 1000) || (np->current_speed == 1000))) { -+ /* Switch between mii and gmii */ -+ reg_eth_rw_gen_ctrl gen_ctrl = REG_RD(eth, np->eth_inst, -+ rw_gen_ctrl); -+ reg_eth_rw_tr_ctrl tr_ctrl = REG_RD(eth, np->eth_inst, -+ rw_tr_ctrl); -+ if (old_speed == 1000) { -+ gen_ctrl.phy = regk_eth_mii; -+ gen_ctrl.gtxclk_out = regk_eth_no; -+ tr_ctrl.carrier_ext = regk_eth_no; -+ } -+ else { -+ gen_ctrl.phy = regk_eth_gmii; -+ gen_ctrl.gtxclk_out = regk_eth_yes; -+ tr_ctrl.carrier_ext = regk_eth_yes; -+ } -+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl); -+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); -+ -+ crisv32_eth_switch_intmem_usage(dev); -+ } -+#endif -+ -+ spin_lock_irqsave(&np->leds->led_lock, flags); -+ if ((old_speed != np->current_speed) || !led_initiated) { -+ led_initiated = 1; -+ np->leds->clear_led_timer.data = (unsigned long) dev; -+ if (np->current_speed) { -+ netif_carrier_on(dev); -+ crisv32_set_network_leds(LED_LINK, dev); -+ } else { -+ netif_carrier_off(dev); -+ crisv32_set_network_leds(LED_NOLINK, dev); -+ } -+ } -+ spin_unlock_irqrestore(&np->leds->led_lock, flags); -+ -+ /* Reinitialize the timer. */ -+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; -+ add_timer(&np->speed_timer); -+ -+ spin_unlock(&np->transceiver_lock); -+} -+ -+static void -+crisv32_eth_set_speed(struct net_device *dev, unsigned long speed) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->transceiver_lock); -+ if (np->current_speed_selection != speed) { -+ np->current_speed_selection = speed; -+ crisv32_eth_negotiate(dev); -+ } -+ spin_unlock(&np->transceiver_lock); -+} -+ -+static void -+crisv32_eth_check_duplex(unsigned long idev) -+{ -+ struct net_device *dev = (struct net_device *) idev; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ reg_eth_rw_rec_ctrl rec_ctrl; -+ int old_duplex = np->full_duplex; -+ -+ np->transceiver->check_duplex(dev); -+ -+ if (old_duplex != np->full_duplex) { -+ /* Duplex changed. */ -+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, -+ rw_rec_ctrl); -+ rec_ctrl.duplex = np->full_duplex; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } -+ -+ /* Reinitialize the timer. */ -+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; -+ add_timer(&np->duplex_timer); -+} -+ -+static void -+crisv32_eth_set_duplex(struct net_device *dev, enum duplex new_duplex) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ spin_lock(&np->transceiver_lock); -+ if (np->current_duplex != new_duplex) { -+ np->current_duplex = new_duplex; -+ crisv32_eth_negotiate(dev); -+ } -+ spin_unlock(&np->transceiver_lock); -+} -+ -+static int -+crisv32_eth_probe_transceiver(struct net_device *dev) -+{ -+ unsigned int phyid_high; -+ unsigned int phyid_low; -+ unsigned int oui; -+ struct transceiver_ops *ops = NULL; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Probe MDIO physical address. */ -+ for (np->mdio_phy_addr = 0; -+ np->mdio_phy_addr <= 31; np->mdio_phy_addr++) { -+ if (crisv32_eth_get_mdio_reg(dev, MII_BMSR) != 0xffff) -+ break; -+ } -+ -+ if (np->mdio_phy_addr == 32) -+ return -ENODEV; -+ -+ /* Get manufacturer. */ -+ phyid_high = crisv32_eth_get_mdio_reg(dev, MII_PHYSID1); -+ phyid_low = crisv32_eth_get_mdio_reg(dev, MII_PHYSID2); -+ -+ oui = (phyid_high << 6) | (phyid_low >> 10); -+ -+ for (ops = &transceivers[0]; ops->oui; ops++) { -+ if (ops->oui == oui) -+ break; -+ } -+ -+ np->transceiver = ops; -+ return 0; -+} -+ -+static void -+generic_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE); -+ if ((data & ADVERTISE_100FULL) || -+ (data & ADVERTISE_100HALF)) -+ np->current_speed = 100; -+ else -+ np->current_speed = 10; -+} -+ -+static void -+generic_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE); -+ if ((data & ADVERTISE_10FULL) || -+ (data & ADVERTISE_100FULL)) -+ np->full_duplex = 1; -+ else -+ np->full_duplex = 0; -+} -+ -+static void -+broadcom_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MDIO_AUX_CTRL_STATUS_REG); -+ np->current_speed = (data & MDIO_BC_SPEED ? 100 : 10); -+} -+ -+static void -+broadcom_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MDIO_AUX_CTRL_STATUS_REG); -+ np->full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0; -+} -+ -+static void -+tdk_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MDIO_TDK_DIAGNOSTIC_REG); -+ np->current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10); -+} -+ -+static void -+tdk_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MDIO_TDK_DIAGNOSTIC_REG); -+ np->full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0; -+ -+} -+ -+static void -+intel_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ data = crisv32_eth_get_mdio_reg(dev, MDIO_INT_STATUS_REG_2); -+ np->current_speed = (data & MDIO_INT_SPEED ? 100 : 10); -+} -+ -+static void -+intel_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MDIO_INT_STATUS_REG_2); -+ np->full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0; -+} -+ -+static void -+national_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MDIO_NAT_LINK_AN_REG); -+ if (data & MDIO_NAT_1000) -+ np->current_speed = 1000; -+ else if (data & MDIO_NAT_100) -+ np->current_speed = 100; -+ else -+ np->current_speed = 10; -+} -+ -+static void -+national_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MDIO_NAT_LINK_AN_REG); -+ if (data & MDIO_NAT_FULL_DUPLEX_IND) -+ np->full_duplex = 1; -+ else -+ np->full_duplex = 0; -+} -+ -+static void -+crisv32_eth_reset_tranceiver(struct net_device *dev) -+{ -+ int i; -+ unsigned short cmd; -+ unsigned short data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR); -+ -+ cmd = (MDIO_START << 14) -+ | (MDIO_WRITE << 12) -+ | (np->mdio_phy_addr << 7) -+ | (MII_BMCR << 2); -+ -+ crisv32_eth_send_mdio_cmd(dev, cmd, 1); -+ -+ data |= 0x8000; -+ -+ /* Magic value is number of bits. */ -+ for (i = 15; i >= 0; i--) -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data)); -+} -+ -+static unsigned short -+crisv32_eth_get_mdio_reg(struct net_device *dev, unsigned char reg_num) -+{ -+ int i; -+ unsigned short cmd; /* Data to be sent on MDIO port. */ -+ unsigned short data; /* Data read from MDIO. */ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Start of frame, OP Code, Physical Address, Register Address. */ -+ cmd = (MDIO_START << 14) -+ | (MDIO_READ << 12) -+ | (np->mdio_phy_addr << 7) -+ | (reg_num << 2); -+ -+ crisv32_eth_send_mdio_cmd(dev, cmd, 0); -+ -+ data = 0; -+ -+ /* Receive data. Magic value is number of bits. */ -+ for (i = 15; i >= 0; i--) -+ data |= (crisv32_eth_receive_mdio_bit(dev) << i); -+ -+ return data; -+} -+ -+static void -+crisv32_eth_set_mdio_reg(struct net_device *dev, unsigned char reg, int value) -+{ -+ int bitCounter; -+ unsigned short cmd; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ cmd = (MDIO_START << 14) -+ | (MDIO_WRITE << 12) -+ | (np->mdio_phy_addr << 7) -+ | (reg << 2); -+ -+ crisv32_eth_send_mdio_cmd(dev, cmd, 1); -+ -+ /* Data... */ -+ for (bitCounter=15; bitCounter>=0 ; bitCounter--) { -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(bitCounter, value)); -+ } -+} -+ -+static void -+crisv32_eth_send_mdio_cmd(struct net_device *dev, unsigned short cmd, -+ int write_cmd) -+{ -+ int i; -+ unsigned char data = 0x2; -+ -+ /* Preamble. Magic value is number of bits. */ -+ for (i = 31; i >= 0; i--) -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, MDIO_PREAMBLE)); -+ -+ for (i = 15; i >= 2; i--) -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, cmd)); -+ -+ /* Turnaround. */ -+ for (i = 1; i >= 0; i--) -+ if (write_cmd) -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data)); -+ else -+ crisv32_eth_receive_mdio_bit(dev); -+} -+ -+static void -+crisv32_eth_send_mdio_bit(struct net_device *dev, unsigned char bit) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ reg_eth_rw_mgm_ctrl mgm_ctrl = { -+ .mdoe = regk_eth_yes, -+ .mdio = bit & 1 -+ }; -+ -+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); -+ -+ udelay(1); -+ -+ mgm_ctrl.mdc = 1; -+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); -+ -+ udelay(1); -+} -+ -+static unsigned char -+crisv32_eth_receive_mdio_bit(struct net_device *dev) -+{ -+ reg_eth_r_stat stat; -+ reg_eth_rw_mgm_ctrl mgm_ctrl = {0}; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); -+ stat = REG_RD(eth, np->eth_inst, r_stat); -+ -+ udelay(1); -+ -+ mgm_ctrl.mdc = 1; -+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); -+ -+ udelay(1); -+ return stat.mdio; -+} -+ -+static void -+crisv32_clear_network_leds(unsigned long priv) -+{ -+ struct net_device *dev = (struct net_device*)priv; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&np->leds->led_lock, flags); -+ if (np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) { -+ crisv32_set_network_leds(LED_NOACTIVITY, dev); -+ -+ /* Set the earliest time we may set the LED */ -+ np->leds->led_next_time = jiffies + NET_FLASH_PAUSE; -+ np->leds->led_active = 0; -+ } -+ spin_unlock_irqrestore(&np->leds->led_lock, flags); -+} -+ -+static void -+crisv32_set_network_leds(int active, struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int light_leds = 0; -+ -+ if (np->leds->ledgrp == LED_GRP_NONE) -+ return; -+ -+ if (active == LED_NOLINK) { -+ if (dev == crisv32_dev[0]) -+ np->leds->ifisup[0] = 0; -+ else -+ np->leds->ifisup[1] = 0; -+ } -+ else if (active == LED_LINK) { -+ if (dev == crisv32_dev[0]) -+ np->leds->ifisup[0] = 1; -+ else -+ np->leds->ifisup[1] = 1; -+#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK) -+ light_leds = 1; -+ } else { -+ light_leds = (active == LED_NOACTIVITY); -+#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY) -+ light_leds = 0; -+ } else { -+ light_leds = (active == LED_ACTIVITY); -+#else -+#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY" -+#endif -+ } -+ -+ if (!use_network_leds) { -+ NET_LED_SET(np->leds->ledgrp,LED_OFF); -+ return; -+ } -+ -+ if (!np->current_speed) { -+ /* Set link down if none of the interfaces that use this led group is up */ -+ if ((np->leds->ifisup[0] + np->leds->ifisup[1]) == 0) { -+#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION) -+ /* Make LED red, link is down */ -+ NET_LED_SET(np->leds->ledgrp,LED_RED); -+#else -+ NET_LED_SET(np->leds->ledgrp,LED_OFF); -+#endif -+ } -+ } -+ else if (light_leds) { -+ if (np->current_speed == 10) { -+ NET_LED_SET(np->leds->ledgrp,LED_ORANGE); -+ } else { -+ NET_LED_SET(np->leds->ledgrp,LED_GREEN); -+ } -+ } -+ else { -+ NET_LED_SET(np->leds->ledgrp,LED_OFF); -+ } -+} -+ -+#ifdef CONFIG_NET_POLL_CONTROLLER -+static void -+crisv32_netpoll(struct net_device* netdev) -+{ -+ crisv32rx_eth_interrupt(DMA0_INTR_VECT, netdev, NULL); -+} -+#endif -+ -+#ifdef CONFIG_CPU_FREQ -+static int -+crisv32_ethernet_freq_notifier(struct notifier_block *nb, -+ unsigned long val, void *data) -+{ -+ struct cpufreq_freqs *freqs = data; -+ if (val == CPUFREQ_POSTCHANGE) { -+ int i; -+ for (i = 0; i < 2; i++) { -+ struct net_device* dev = crisv32_dev[i]; -+ unsigned short data; -+ if (dev == NULL) -+ continue; -+ -+ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR); -+ if (freqs->new == 200000) -+ data &= ~BMCR_PDOWN; -+ else -+ data |= BMCR_PDOWN; -+ crisv32_eth_set_mdio_reg(dev, MII_BMCR, data); -+ } -+ } -+ return 0; -+} -+#endif -+ -+/* -+ * Must be called with the np->lock held. -+ */ -+static void crisv32_ethernet_bug(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ dma_descr_data *dma_pos; -+ dma_descr_data *in_dma_pos; -+ reg_dma_rw_stat stat = {0}; -+ reg_dma_rw_stat in_stat = {0}; -+ int i; -+ -+ /* Get the current output dma position. */ -+ stat = REG_RD(dma, np->dma_out_inst, rw_stat); -+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data)); -+ in_stat = REG_RD(dma, np->dma_in_inst, rw_stat); -+ in_dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data)); -+ -+ printk("%s:\n" -+ "stat.list_state=%x\n" -+ "stat.mode=%x\n" -+ "stat.stream_cmd_src=%x\n" -+ "dma_pos=%x\n" -+ "in_stat.list_state=%x\n" -+ "in_stat.mode=%x\n" -+ "in_stat.stream_cmd_src=%x\n" -+ "in_dma_pos=%x\n" -+ "catch=%x active=%x\n" -+ "packets=%d queue=%d\n" -+ "intr_vect.r_vect=%x\n" -+ "dma.r_masked_intr=%x dma.rw_ack_intr=%x " -+ "dma.r_intr=%x dma.rw_intr_masked=%x\n" -+ "eth.r_stat=%x\n", -+ __func__, -+ stat.list_state, stat.mode, stat.stream_cmd_src, -+ (unsigned int)dma_pos, -+ in_stat.list_state, in_stat.mode, in_stat.stream_cmd_src, -+ (unsigned int)in_dma_pos, -+ (unsigned int)&np->catch_tx_desc->descr, -+ (unsigned int)&np->active_tx_desc->descr, -+ np->txpackets, -+ netif_queue_stopped(dev), -+ REG_RD_INT(intr_vect, regi_irq, r_vect), -+ REG_RD_INT(dma, np->dma_out_inst, r_masked_intr), -+ REG_RD_INT(dma, np->dma_out_inst, rw_ack_intr), -+ REG_RD_INT(dma, np->dma_out_inst, r_intr), -+ REG_RD_INT(dma, np->dma_out_inst, rw_intr_mask), -+ REG_RD_INT(eth, np->eth_inst, r_stat)); -+ -+ printk("tx-descriptors:\n"); -+ for (i = 0; i < NBR_TX_DESC; i++) { -+ printk("txdesc[%d]=0x%x\n", i, (unsigned int) -+ virt_to_phys(&np->dma_tx_descr_list[i].descr)); -+ printk("txdesc[%d].skb=0x%x\n", i, -+ (unsigned int)np->dma_tx_descr_list[i].skb); -+ printk("txdesc[%d].buf=0x%x\n", i, -+ (unsigned int)np->dma_tx_descr_list[i].descr.buf); -+ printk("txdesc[%d].after=0x%x\n", i, -+ (unsigned int)np->dma_tx_descr_list[i].descr.after); -+ printk("txdesc[%d].intr=%x\n", i, -+ np->dma_tx_descr_list[i].descr.intr); -+ printk("txdesc[%d].eol=%x\n", i, -+ np->dma_tx_descr_list[i].descr.eol); -+ printk("txdesc[%d].out_eop=%x\n", i, -+ np->dma_tx_descr_list[i].descr.out_eop); -+ printk("txdesc[%d].wait=%x\n", i, -+ np->dma_tx_descr_list[i].descr.wait); -+ } -+} -+ -+ -+static int -+crisv32_init_module(void) -+{ -+ return crisv32_ethernet_init(); -+} -+ -+module_init(crisv32_init_module); -diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v32.h linux-2.6.19.2.dev/drivers/net/cris/eth_v32.h ---- linux-2.6.19.2.orig/drivers/net/cris/eth_v32.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/drivers/net/cris/eth_v32.h 2007-02-06 11:10:37.000000000 +0100 -@@ -0,0 +1,248 @@ -+/* -+ * Definitions for ETRAX FS ethernet driver. -+ * -+ * Copyright (C) 2003, 2004, 2005 Axis Communications. -+ */ -+ -+#ifndef _ETRAX_ETHERNET_H_ -+#define _ETRAX_ETHERNET_H_ -+ -+#include -+ -+ -+#define MAX_MEDIA_DATA_SIZE 1522 /* Max packet size. */ -+ -+#define NBR_RX_DESC 64 /* Number of RX descriptors. */ -+#define NBR_TX_DESC 16 /* Number of TX descriptors. */ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+#define NBR_INTMEM_RX_DESC 5 /* Number of RX descriptors in int. mem. -+ * when running in gigabit mode. -+ * Should be less then NBR_RX_DESC -+ */ -+#define NBR_INTMEM_TX_BUF 4 /* Number of TX buffers in int. mem -+ * when running in gigabit mode. -+ * Should be less than NBR_TX_DESC -+ */ -+#endif -+ -+/* Large packets are sent directly to upper layers while small packets -+ * are copied (to reduce memory waste). The following constant -+ * decides the breakpoint. -+ */ -+#define RX_COPYBREAK (256) -+ -+#define ETHER_HEAD_LEN (14) -+ -+/* -+** MDIO constants. -+*/ -+#define MDIO_START 0x1 -+#define MDIO_READ 0x2 -+#define MDIO_WRITE 0x1 -+#define MDIO_PREAMBLE 0xfffffffful -+ -+/* Broadcom specific */ -+#define MDIO_AUX_CTRL_STATUS_REG 0x18 -+#define MDIO_BC_FULL_DUPLEX_IND 0x1 -+#define MDIO_BC_SPEED 0x2 -+ -+/* TDK specific */ -+#define MDIO_TDK_DIAGNOSTIC_REG 18 -+#define MDIO_TDK_DIAGNOSTIC_RATE 0x400 -+#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800 -+ -+/*Intel LXT972A specific*/ -+#define MDIO_INT_STATUS_REG_2 0x0011 -+#define MDIO_INT_FULL_DUPLEX_IND ( 0x0001 << 9 ) -+#define MDIO_INT_SPEED ( 0x0001 << 14 ) -+ -+/*National Semiconductor DP83865 specific*/ -+#define MDIO_NAT_LINK_AN_REG 0x11 -+#define MDIO_NAT_1000 (0x0001 << 4) -+#define MDIO_NAT_100 (0x0001 << 3) -+#define MDIO_NAT_FULL_DUPLEX_IND (0x0001 << 1) -+ -+/* Network flash constants */ -+#define NET_FLASH_TIME (HZ/50) /* 20 ms */ -+#define NET_FLASH_PAUSE (HZ/100) /* 10 ms */ -+#define NET_LINK_UP_CHECK_INTERVAL (2*HZ) /* 2 seconds. */ -+#define NET_DUPLEX_CHECK_INTERVAL (2*HZ) /* 2 seconds. */ -+ -+/* Duplex settings. */ -+enum duplex { -+ half, -+ full, -+ autoneg -+}; -+ -+/* Some transceivers requires special handling. */ -+struct transceiver_ops { -+ unsigned int oui; -+ void (*check_speed) (struct net_device * dev); -+ void (*check_duplex) (struct net_device * dev); -+}; -+ -+typedef struct crisv32_eth_descr { -+ dma_descr_data descr __attribute__ ((__aligned__(32))); -+ struct sk_buff *skb; -+ unsigned char *linearized_packet; -+} crisv32_eth_descr; -+ -+ -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+struct tx_buffer_list { -+ struct tx_buffer_list *next; -+ unsigned char *buf; -+ char free; -+}; -+#endif -+ -+/* LED stuff */ -+#define LED_GRP_0 0 -+#define LED_GRP_1 1 -+#define LED_GRP_NONE 2 -+ -+#define LED_ACTIVITY 0 -+#define LED_NOACTIVITY 1 -+#define LED_LINK 2 -+#define LED_NOLINK 3 -+ -+struct crisv32_eth_leds { -+ unsigned int ledgrp; -+ int led_active; -+ unsigned long led_next_time; -+ struct timer_list clear_led_timer; -+ spinlock_t led_lock; /* Protect LED state */ -+ int ifisup[2]; -+}; -+ -+#define NET_LED_SET(x,y) \ -+ do { \ -+ if (x == 0) LED_NETWORK_GRP0_SET(y); \ -+ if (x == 1) LED_NETWORK_GRP1_SET(y); \ -+ } while (0) -+ -+/* Information that need to be kept for each device. */ -+struct crisv32_ethernet_local { -+ dma_descr_context ctxt_in __attribute__ ((__aligned__(32))); -+ dma_descr_context ctxt_out __attribute__ ((__aligned__(32))); -+ -+ crisv32_eth_descr *active_rx_desc; -+ crisv32_eth_descr *prev_rx_desc; -+ crisv32_eth_descr *last_rx_desc; -+ -+ crisv32_eth_descr *active_tx_desc; -+ crisv32_eth_descr *prev_tx_desc; -+ crisv32_eth_descr *catch_tx_desc; -+ -+ crisv32_eth_descr dma_rx_descr_list[NBR_RX_DESC]; -+ crisv32_eth_descr dma_tx_descr_list[NBR_TX_DESC]; -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ struct tx_buffer_list tx_intmem_buf_list[NBR_INTMEM_TX_BUF]; -+ struct tx_buffer_list *intmem_tx_buf_active; -+ struct tx_buffer_list *intmem_tx_buf_catch; -+ char gigabit_mode; -+#endif -+ char new_rx_package; -+ -+ /* DMA and ethernet registers for the device. */ -+ int eth_inst; -+ int dma_in_inst; -+ int dma_out_inst; -+ -+ /* Network speed indication. */ -+ struct timer_list speed_timer; -+ int current_speed; /* Speed read from tranceiver */ -+ int current_speed_selection; /* Speed selected by user */ -+ int sender_started; -+ int txpackets; -+ -+ struct crisv32_eth_leds *leds; -+ -+ /* Duplex. */ -+ struct timer_list duplex_timer; -+ int full_duplex; -+ enum duplex current_duplex; -+ -+ struct net_device_stats stats; -+ -+ /* Transciever address. */ -+ unsigned int mdio_phy_addr; -+ -+ struct transceiver_ops *transceiver; -+ -+ /* -+ * TX control lock. This protects the transmit buffer ring state along -+ * with the "tx full" state of the driver. This means all netif_queue -+ * flow control actions are protected by this lock as well. -+ */ -+ spinlock_t lock; -+ spinlock_t transceiver_lock; /* Protect transceiver state. */ -+}; -+ -+/* Function prototypes. */ -+static int crisv32_ethernet_init(void); -+static int crisv32_ethernet_device_init(struct net_device* dev); -+static int crisv32_eth_open(struct net_device *dev); -+static int crisv32_eth_close(struct net_device *dev); -+static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr); -+static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id); -+static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id); -+static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id); -+static void crisv32_eth_receive_packet(struct net_device *dev); -+static int crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev); -+static void crisv32_eth_hw_send_packet(unsigned char *buf, int length, -+ void *priv); -+static void crisv32_eth_tx_timeout(struct net_device *dev); -+static void crisv32_eth_set_multicast_list(struct net_device *dev); -+static int crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, -+ int cmd); -+static int crisv32_eth_set_config(struct net_device* dev, struct ifmap* map); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+static void crisv32_eth_switch_intmem_usage(struct net_device *dev); -+#endif -+static void crisv32_eth_negotiate(struct net_device *dev); -+static void crisv32_eth_check_speed(unsigned long idev); -+static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed); -+static void crisv32_eth_check_duplex(unsigned long idev); -+static void crisv32_eth_set_duplex(struct net_device *dev, enum duplex); -+static int crisv32_eth_probe_transceiver(struct net_device *dev); -+ -+static struct ethtool_ops crisv32_ethtool_ops; -+ -+static void generic_check_speed(struct net_device *dev); -+static void generic_check_duplex(struct net_device *dev); -+static void broadcom_check_speed(struct net_device *dev); -+static void broadcom_check_duplex(struct net_device *dev); -+static void tdk_check_speed(struct net_device *dev); -+static void tdk_check_duplex(struct net_device *dev); -+static void intel_check_speed(struct net_device* dev); -+static void intel_check_duplex(struct net_device *dev); -+static void national_check_speed(struct net_device* dev); -+static void national_check_duplex(struct net_device *dev); -+ -+#ifdef CONFIG_NET_POLL_CONTROLLER -+static void crisv32_netpoll(struct net_device* dev); -+#endif -+ -+static void crisv32_clear_network_leds(unsigned long dummy); -+static void crisv32_set_network_leds(int active, struct net_device* dev); -+ -+static void crisv32_eth_reset_tranceiver(struct net_device *dev); -+static unsigned short crisv32_eth_get_mdio_reg(struct net_device *dev, -+ unsigned char reg_num); -+static void crisv32_eth_set_mdio_reg(struct net_device *dev, -+ unsigned char reg_num, -+ int val); -+static void crisv32_eth_send_mdio_cmd(struct net_device *dev, -+ unsigned short cmd, int write_cmd); -+static void crisv32_eth_send_mdio_bit(struct net_device *dev, -+ unsigned char bit); -+static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev); -+ -+static struct net_device_stats *crisv32_get_stats(struct net_device *dev); -+static void crisv32_start_dma_out(struct crisv32_ethernet_local* np); -+ -+ -+#endif /* _ETRAX_ETHERNET_H_ */ diff --git a/target/linux/etrax/patches/cris/004-kernel-Kconfig.sched.patch b/target/linux/etrax/patches/cris/004-kernel-Kconfig.sched.patch deleted file mode 100644 index c6feeebf7b..0000000000 --- a/target/linux/etrax/patches/cris/004-kernel-Kconfig.sched.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- linux-2.6.19.2.old/kernel/Kconfig.sched 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2.dev/kernel/Kconfig.sched 2007-02-05 12:22:39.000000000 +0100 -@@ -0,0 +1,18 @@ -+# -+# Scheduler tuning -+# -+ -+config OVERRIDE_SCHED_STARVATION_LIMIT -+ bool "Override scheduler STARVATION_LIMIT" -+ help -+ This threshold sets the maximum time a task may wait in the -+ expired runqueue when deciding to re-insert interactive tasks -+ into the active runqueue. The time-limit is in ms but scales with -+ the number of running tasks in the system. -+ -+config SCHED_STARVATION_LIMIT -+ int "Scheduler Starvation Limit" -+ depends on OVERRIDE_SCHED_STARVATION_LIMIT -+ default 10 -+ help -+ Starvation limit in milliseconds per running task. diff --git a/target/linux/etrax/patches/cris/005-loader.patch b/target/linux/etrax/patches/cris/005-loader.patch deleted file mode 100644 index bf35bd8aa0..0000000000 --- a/target/linux/etrax/patches/cris/005-loader.patch +++ /dev/null @@ -1,60 +0,0 @@ -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile 2007-05-19 14:31:06.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile 2007-05-19 14:32:24.000000000 +0200 -@@ -2,7 +2,7 @@ - # arch/cris/arch-v10/boot/Makefile - # - --OBJCOPY = objcopy-cris -+OBJCOPY = /usr/local/cris/objcopy-cris - OBJCOPYFLAGS = -O binary --remove-section=.bss - - subdir- := compressed rescue -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-19 14:31:06.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-19 14:33:45.000000000 +0200 -@@ -4,10 +4,10 @@ - - CC = gcc-cris -melf $(LINUXINCLUDE) - CFLAGS = -O2 --LD = ld-cris -+LD = /usr/local/cris/ld-cris - LDFLAGS = -T $(obj)/decompress.ld - OBJECTS = $(obj)/head.o $(obj)/misc.o --OBJCOPY = objcopy-cris -+OBJCOPY = /usr/local/cris/objcopy-cris - OBJCOPYFLAGS = -O binary --remove-section=.bss - - quiet_cmd_image = BUILD $@ -@@ -22,10 +22,10 @@ - $(call if_changed,objcopy) - - $(obj)/head.o: $(obj)/head.S .config -- @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ -+ /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__ASSEMBLY__ -traditional -c $< -o $@ - - $(obj)/misc.o: $(obj)/misc.c .config -- @$(CC) -D__KERNEL__ -c $< -o $@ -+ /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__KERNEL__ -c $< -o $@ - - $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE - $(call if_changed,image) -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/rescue/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/rescue/Makefile ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/rescue/Makefile 2007-05-19 14:31:06.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/rescue/Makefile 2007-05-19 14:34:25.000000000 +0200 -@@ -2,12 +2,12 @@ - # Makefile for rescue (bootstrap) code - # - --CC = gcc-cris -mlinux $(LINUXINCLUDE) -+CC = /usr/local/cris/gcc-cris -mlinux $(LINUXINCLUDE) - CFLAGS = -O2 - AFLAGS = -traditional --LD = gcc-cris -mlinux -nostdlib -+LD = /usr/local/cris/gcc-cris -mlinux -nostdlib - LDFLAGS = -T $(obj)/rescue.ld --OBJCOPY = objcopy-cris -+OBJCOPY = /usr/local/cris/objcopy-cris - OBJCOPYFLAGS = -O binary --remove-section=.bss - obj-y = head.o - OBJECT = $(obj)/$(obj-y) diff --git a/target/linux/etrax/patches/cris/006-gcc-4.patch b/target/linux/etrax/patches/cris/006-gcc-4.patch deleted file mode 100644 index a957632e2f..0000000000 --- a/target/linux/etrax/patches/cris/006-gcc-4.patch +++ /dev/null @@ -1,705 +0,0 @@ -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/lib/memset.c linux-2.6.19.2/arch/cris/arch-v10/lib/memset.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/lib/memset.c 2007-06-03 13:59:39.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/lib/memset.c 2007-06-03 14:11:43.000000000 +0200 -@@ -110,45 +110,28 @@ - If you want to check that the allocation was right; then - check the equalities in the first comment. It should say - "r13=r13, r12=r12, r11=r11" */ -- __asm__ volatile (" -- ;; Check that the following is true (same register names on -- ;; both sides of equal sign, as in r8=r8): -- ;; %0=r13, %1=r12, %4=r11 -- ;; -- ;; Save the registers we'll clobber in the movem process -- ;; on the stack. Don't mention them to gcc, it will only be -- ;; upset. -- subq 11*4,$sp -- movem $r10,[$sp] -- -- move.d $r11,$r0 -- move.d $r11,$r1 -- move.d $r11,$r2 -- move.d $r11,$r3 -- move.d $r11,$r4 -- move.d $r11,$r5 -- move.d $r11,$r6 -- move.d $r11,$r7 -- move.d $r11,$r8 -- move.d $r11,$r9 -- move.d $r11,$r10 -- -- ;; Now we've got this: -- ;; r13 - dst -- ;; r12 - n -+ __asm__ volatile ( -+ "subq 11*4,$sp\n\t" -+ "movem $r10,[$sp]\n\t" -+ "move.d $r11,$r0\n\t" -+ "move.d $r11,$r1\n\t" -+ "move.d $r11,$r2\n\t" -+ "move.d $r11,$r3\n\t" -+ "move.d $r11,$r4\n\t" -+ "move.d $r11,$r5\n\t" -+ "move.d $r11,$r6\n\t" -+ "move.d $r11,$r7\n\t" -+ "move.d $r11,$r8\n\t" -+ "move.d $r11,$r9\n\t" -+ "move.d $r11,$r10\n\t" -+ "subq 12*4,$r12\n\t" -+"0:\n\t" -+ "subq 12*4,$r12\n\t" -+ "bge 0b\n\t" -+ "movem $r11,[$r13+]\n\t" -+ "addq 12*4,$r12\n\t" -+ "movem [$sp+],$r10" - -- ;; Update n for the first loop -- subq 12*4,$r12 --0: -- subq 12*4,$r12 -- bge 0b -- movem $r11,[$r13+] -- -- addq 12*4,$r12 ;; compensate for last loop underflowing n -- -- ;; Restore registers from stack -- movem [$sp+],$r10" -- - /* Outputs */ : "=r" (dst), "=r" (n) - /* Inputs */ : "0" (dst), "1" (n), "r" (lc)); - -@@ -161,10 +144,14 @@ - - while ( n >= 16 ) - { -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; - n -= 16; - } - -@@ -182,67 +169,95 @@ - *(short*)dst = (short) lc; - break; - case 3: -- *((short*)dst)++ = (short) lc; -+ *((short*)dst) = (short) lc; -+ dst+=2; - *(char*)dst = (char) lc; - break; - case 4: -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; - break; - case 5: -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; - *(char*)dst = (char) lc; - break; - case 6: -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; - *(short*)dst = (short) lc; - break; - case 7: -- *((long*)dst)++ = lc; -- *((short*)dst)++ = (short) lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((short*)dst) = (short) lc; -+ dst+=2; - *(char*)dst = (char) lc; - break; - case 8: -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; - break; - case 9: -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; - *(char*)dst = (char) lc; - break; - case 10: -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; - *(short*)dst = (short) lc; - break; - case 11: -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -- *((short*)dst)++ = (short) lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((short*)dst) = (short) lc; -+ dst+=2; - *(char*)dst = (char) lc; - break; - case 12: -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; - break; - case 13: -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; - *(char*)dst = (char) lc; - break; - case 14: -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; - *(short*)dst = (short) lc; - break; - case 15: -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -- *((long*)dst)++ = lc; -- *((short*)dst)++ = (short) lc; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((long*)dst) = lc; -+ dst+=4; -+ *((short*)dst) = (short) lc; -+ dst+=2; - *(char*)dst = (char) lc; - break; - } -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/lib/string.c linux-2.6.19.2/arch/cris/arch-v10/lib/string.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/lib/string.c 2007-06-03 13:59:39.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/lib/string.c 2007-06-03 14:21:02.000000000 +0200 -@@ -95,37 +95,19 @@ - If you want to check that the allocation was right; then - check the equalities in the first comment. It should say - "r13=r13, r11=r11, r12=r12" */ -- __asm__ volatile (" -- ;; Check that the following is true (same register names on -- ;; both sides of equal sign, as in r8=r8): -- ;; %0=r13, %1=r11, %2=r12 -- ;; -- ;; Save the registers we'll use in the movem process -- ;; on the stack. -- subq 11*4,$sp -- movem $r10,[$sp] -- -- ;; Now we've got this: -- ;; r11 - src -- ;; r13 - dst -- ;; r12 - n -- -- ;; Update n for the first loop -- subq 44,$r12 --0: -- movem [$r11+],$r10 -- subq 44,$r12 -- bge 0b -- movem $r10,[$r13+] -- -- addq 44,$r12 ;; compensate for last loop underflowing n -- -- ;; Restore registers from stack -- movem [$sp+],$r10" -- -+ __asm__ volatile ( -+ "subq 11*4,$sp\n\t" -+ "movem $r10,[$sp]\n\t" -+ "subq 44,$r12\n\t" -+"0:\n\t" -+ "movem [$r11+],$r10\n\t" -+ "subq 44,$r12\n\t" -+ "bge 0b\n\t" -+ "movem $r10,[$r13+]\n\t" -+ "addq 44,$r12\n\t" -+ "movem [$sp+],$r10\n\t" - /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) - /* Inputs */ : "0" (dst), "1" (src), "2" (n)); -- - } - - /* Either we directly starts copying, using dword copying -@@ -135,10 +117,14 @@ - - while ( n >= 16 ) - { -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - n -= 16; - } - -@@ -156,67 +142,95 @@ - *(short*)dst = *(short*)src; - break; - case 3: -- *((short*)dst)++ = *((short*)src)++; -+ *((short*)dst) = *((short*)src); -+ src+=2;dst+=2; - *(char*)dst = *(char*)src; - break; - case 4: -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - break; - case 5: -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - *(char*)dst = *(char*)src; - break; - case 6: -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - *(short*)dst = *(short*)src; - break; - case 7: -- *((long*)dst)++ = *((long*)src)++; -- *((short*)dst)++ = *((short*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((short*)dst) = *((short*)src); -+ src+=2;dst+=2; - *(char*)dst = *(char*)src; - break; - case 8: -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - break; - case 9: -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - *(char*)dst = *(char*)src; - break; - case 10: -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - *(short*)dst = *(short*)src; - break; - case 11: -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -- *((short*)dst)++ = *((short*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((short*)dst) = *((short*)src); -+ src+=2;dst+=2; - *(char*)dst = *(char*)src; - break; - case 12: -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - break; - case 13: -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - *(char*)dst = *(char*)src; - break; - case 14: -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; - *(short*)dst = *(short*)src; - break; - case 15: -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -- *((long*)dst)++ = *((long*)src)++; -- *((short*)dst)++ = *((short*)src)++; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((long*)dst) = *((long*)src); -+ src+=4;dst+=4; -+ *((short*)dst) = *((short*)src); -+ src+=2;dst+=2; - *(char*)dst = *(char*)src; - break; - } -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/lib/usercopy.c linux-2.6.19.2/arch/cris/arch-v10/lib/usercopy.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/lib/usercopy.c 2007-06-03 13:59:39.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/lib/usercopy.c 2007-06-03 14:25:55.000000000 +0200 -@@ -88,63 +88,38 @@ - If you want to check that the allocation was right; then - check the equalities in the first comment. It should say - "r13=r13, r11=r11, r12=r12". */ -- __asm__ volatile ("\ -- .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ -- .err \n\ -- .endif \n\ -- -- ;; Save the registers we'll use in the movem process -- ;; on the stack. -- subq 11*4,$sp -- movem $r10,[$sp] -- -- ;; Now we've got this: -- ;; r11 - src -- ;; r13 - dst -- ;; r12 - n -- -- ;; Update n for the first loop -- subq 44,$r12 -- --; Since the noted PC of a faulting instruction in a delay-slot of a taken --; branch, is that of the branch target, we actually point at the from-movem --; for this case. There is no ambiguity here; if there was a fault in that --; instruction (meaning a kernel oops), the faulted PC would be the address --; after *that* movem. -- --0: -- movem [$r11+],$r10 -- subq 44,$r12 -- bge 0b -- movem $r10,[$r13+] --1: -- addq 44,$r12 ;; compensate for last loop underflowing n -- -- ;; Restore registers from stack -- movem [$sp+],$r10 --2: -- .section .fixup,\"ax\" -- --; To provide a correct count in r10 of bytes that failed to be copied, --; we jump back into the loop if the loop-branch was taken. There is no --; performance penalty for sany use; the program will segfault soon enough. -- --3: -- move.d [$sp],$r10 -- addq 44,$r10 -- move.d $r10,[$sp] -- jump 0b --4: -- movem [$sp+],$r10 -- addq 44,$r10 -- addq 44,$r12 -- jump 2b -- -- .previous -- .section __ex_table,\"a\" -- .dword 0b,3b -- .dword 1b,4b -- .previous" -+ __asm__ volatile ( -+ ".ifnc %0%1%2%3,$r13$r11$r12$r10 \n\t" -+ ".err \n\t" -+ ".endif \n\t" -+ "subq 11*4,$sp\n\t" -+ "movem $r10,[$sp]\n\t" -+ "subq 44,$r12\n\t" -+ "0:\n\t" -+ "movem [$r11+],$r10\n\t" -+ "subq 44,$r12\n\t" -+ "bge 0b\n\t" -+ "movem $r10,[$r13+]\n\t" -+ "1:\n\t" -+ "addq 44,$r12 \n\t" -+ "movem [$sp+],$r10\n\t" -+ "2:\n\t" -+ ".section .fixup,\"ax\"\n\t" -+ "3:\n\t" -+ "move.d [$sp],$r10\n\t" -+ "addq 44,$r10\n\t" -+ "move.d $r10,[$sp]\n\t" -+ "jump 0b\n\t" -+ "4:\n\t" -+ "movem [$sp+],$r10\n\t" -+ "addq 44,$r10\n\t" -+ "addq 44,$r12\n\t" -+ "jump 2b\n\t" -+ ".previous\n\t" -+ ".section __ex_table,\"a\"\n\t" -+ ".dword 0b,3b\n\t" -+ ".dword 1b,4b\n\t" -+ ".previous\n\t" - - /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) - /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn)); -@@ -253,60 +228,32 @@ - If you want to check that the allocation was right; then - check the equalities in the first comment. It should say - "r13=r13, r11=r11, r12=r12" */ -- __asm__ volatile (" -- .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ -- .err \n\ -- .endif \n\ -- -- ;; Save the registers we'll use in the movem process -- ;; on the stack. -- subq 11*4,$sp -- movem $r10,[$sp] -- -- ;; Now we've got this: -- ;; r11 - src -- ;; r13 - dst -- ;; r12 - n -- -- ;; Update n for the first loop -- subq 44,$r12 --0: -- movem [$r11+],$r10 --1: -- subq 44,$r12 -- bge 0b -- movem $r10,[$r13+] -- -- addq 44,$r12 ;; compensate for last loop underflowing n -- -- ;; Restore registers from stack -- movem [$sp+],$r10 --4: -- .section .fixup,\"ax\" -- --;; Do not jump back into the loop if we fail. For some uses, we get a --;; page fault somewhere on the line. Without checking for page limits, --;; we don't know where, but we need to copy accurately and keep an --;; accurate count; not just clear the whole line. To do that, we fall --;; down in the code below, proceeding with smaller amounts. It should --;; be kept in mind that we have to cater to code like what at one time --;; was in fs/super.c: --;; i = size - copy_from_user((void *)page, data, size); --;; which would cause repeated faults while clearing the remainder of --;; the SIZE bytes at PAGE after the first fault. --;; A caveat here is that we must not fall through from a failing page --;; to a valid page. -- --3: -- movem [$sp+],$r10 -- addq 44,$r12 ;; Get back count before faulting point. -- subq 44,$r11 ;; Get back pointer to faulting movem-line. -- jump 4b ;; Fall through, pretending the fault didn't happen. -- -- .previous -- .section __ex_table,\"a\" -- .dword 1b,3b -- .previous" -+ __asm__ volatile ( -+ ".ifnc %0%1%2%3,$r13$r11$r12$r10 \n\t" -+ ".err \n\t" -+ ".endif \n\t" -+ "subq 11*4,$sp\n\t" -+ "movem $r10,[$sp]\n\t" -+ "subq 44,$r12\n\t" -+ "0:\n\t" -+ "movem [$r11+],$r10\n\t" -+ "1:\n\t" -+ "subq 44,$r12\n\t" -+ "bge 0b\n\t" -+ "movem $r10,[$r13+]\n\t" -+ "addq 44,$r12 \n\t" -+ "movem [$sp+],$r10\n\t" -+ "4:\n\t" -+ ".section .fixup,\"ax\"\n\t" -+ "3:\n\t" -+ "movem [$sp+],$r10\n\t" -+ "addq 44,$r12\n\t" -+ "subq 44,$r11\n\t" -+ "jump 4b \n\t" -+ ".previous\n\t" -+ ".section __ex_table,\"a\"\n\t" -+ ".dword 1b,3b\n\t" -+ ".previous\n\t" - - /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) - /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn)); -@@ -425,66 +372,50 @@ - If you want to check that the allocation was right; then - check the equalities in the first comment. It should say - something like "r13=r13, r11=r11, r12=r12". */ -- __asm__ volatile (" -- .ifnc %0%1%2,$r13$r12$r10 \n\ -- .err \n\ -- .endif \n\ -- -- ;; Save the registers we'll clobber in the movem process -- ;; on the stack. Don't mention them to gcc, it will only be -- ;; upset. -- subq 11*4,$sp -- movem $r10,[$sp] -- -- clear.d $r0 -- clear.d $r1 -- clear.d $r2 -- clear.d $r3 -- clear.d $r4 -- clear.d $r5 -- clear.d $r6 -- clear.d $r7 -- clear.d $r8 -- clear.d $r9 -- clear.d $r10 -- clear.d $r11 -- -- ;; Now we've got this: -- ;; r13 - dst -- ;; r12 - n -- -- ;; Update n for the first loop -- subq 12*4,$r12 --0: -- subq 12*4,$r12 -- bge 0b -- movem $r11,[$r13+] --1: -- addq 12*4,$r12 ;; compensate for last loop underflowing n -- -- ;; Restore registers from stack -- movem [$sp+],$r10 --2: -- .section .fixup,\"ax\" --3: -- move.d [$sp],$r10 -- addq 12*4,$r10 -- move.d $r10,[$sp] -- clear.d $r10 -- jump 0b -- --4: -- movem [$sp+],$r10 -- addq 12*4,$r10 -- addq 12*4,$r12 -- jump 2b -- -- .previous -- .section __ex_table,\"a\" -- .dword 0b,3b -- .dword 1b,4b -- .previous" -- -+ __asm__ volatile ( -+ ".ifnc %0%1%2,$r13$r12$r10\n\t" -+ ".err \n\t" -+ ".endif\n\t" -+ "subq 11*4,$sp\n\t" -+ "movem $r10,[$sp]\n\t" -+ "clear.d $r0\n\t" -+ "clear.d $r1\n\t" -+ "clear.d $r2\n\t" -+ "clear.d $r3\n\t" -+ "clear.d $r4\n\t" -+ "clear.d $r5\n\t" -+ "clear.d $r6\n\t" -+ "clear.d $r7\n\t" -+ "clear.d $r8\n\t" -+ "clear.d $r9\n\t" -+ "clear.d $r10\n\t" -+ "clear.d $r11\n\t" -+ "subq 12*4,$r12\n\t" -+ "0:\n\t" -+ "subq 12*4,$r12\n\t" -+ "bge 0b\n\t" -+ "movem $r11,[$r13+]\n\t" -+ "1: \n\t" -+ "addq 12*4,$r12 \n\t" -+ "movem [$sp+],$r10\n\t" -+ "2:\n\t" -+ ".section .fixup,\"ax\"\n\t" -+ "3:\n\t" -+ "move.d [$sp],$r10\n\t" -+ "addq 12*4,$r10\n\t" -+ "move.d $r10,[$sp]\n\t" -+ "clear.d $r10\n\t" -+ "jump 0b\n\t" -+ "4:\n\t" -+ "movem [$sp+],$r10\n\t" -+ "addq 12*4,$r10\n\t" -+ "addq 12*4,$r12\n\t" -+ "jump 2b\n\t" -+ ".previous\n\t" -+ ".section __ex_table,\"a\"\n\t" -+ ".dword 0b,3b\n\t" -+ ".dword 1b,4b\n\t" -+ ".previous\n\t" - /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn) - /* Inputs */ : "0" (dst), "1" (n), "2" (retn) - /* Clobber */ : "r11"); diff --git a/target/linux/etrax/patches/cris/007-nr_free_pages.patch b/target/linux/etrax/patches/cris/007-nr_free_pages.patch deleted file mode 100644 index 235b000ded..0000000000 --- a/target/linux/etrax/patches/cris/007-nr_free_pages.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -urN linux-2.6.19.2.orig/mm/page_alloc.c linux-2.6.19.2/mm/page_alloc.c ---- linux-2.6.19.2.orig/mm/page_alloc.c 2007-05-20 03:26:41.000000000 +0200 -+++ linux-2.6.19.2/mm/page_alloc.c 2007-05-20 03:28:22.000000000 +0200 -@@ -1200,7 +1200,7 @@ - unsigned int nr_free_pages(void) - { - unsigned int sum = 0; -- struct zone *zone; -+ volatile struct zone *zone; - - for_each_zone(zone) - sum += zone->free_pages; diff --git a/target/linux/etrax/patches/cris/008-flashmap.patch b/target/linux/etrax/patches/cris/008-flashmap.patch deleted file mode 100644 index 63ee023e08..0000000000 --- a/target/linux/etrax/patches/cris/008-flashmap.patch +++ /dev/null @@ -1,41 +0,0 @@ -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-21 23:12:27.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-21 23:13:09.000000000 +0200 -@@ -256,7 +256,7 @@ - - /* If no partition-table was found, we use this default-set. */ - #define MAX_PARTITIONS 7 --#define NUM_DEFAULT_PARTITIONS 3 -+#define NUM_DEFAULT_PARTITIONS 3 - - /* - * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the -@@ -265,19 +265,19 @@ - */ - static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { - { -- .name = "boot firmware", -- .size = CONFIG_ETRAX_PTABLE_SECTOR, -+ .name = "kernel", -+ .size = 0x200000, - .offset = 0 - }, - { -- .name = "kernel", -- .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), -- .offset = CONFIG_ETRAX_PTABLE_SECTOR -+ .name = "filesystem", -+ .size = 0x200000, -+ .offset = 0x200000 - }, - { -- .name = "filesystem", -- .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, -- .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) -+ .name = "filesystem2", -+ .size = 0x400000, -+ .offset = 0x400000 - } - }; - -009-flashmap.patch diff --git a/target/linux/etrax/patches/cris/008a-flashmap.patch b/target/linux/etrax/patches/cris/008a-flashmap.patch deleted file mode 100644 index dfb5d08300..0000000000 --- a/target/linux/etrax/patches/cris/008a-flashmap.patch +++ /dev/null @@ -1,33 +0,0 @@ -Binary files linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/.axisflashmap.c.swp and linux-2.6.19.2/arch/cris/arch-v10/drivers/.axisflashmap.c.swp differ -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-28 01:40:09.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-28 01:41:29.000000000 +0200 -@@ -256,7 +256,7 @@ - - /* If no partition-table was found, we use this default-set. */ - #define MAX_PARTITIONS 7 --#define NUM_DEFAULT_PARTITIONS 3 -+#define NUM_DEFAULT_PARTITIONS 2 - - /* - * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the -@@ -270,15 +270,10 @@ - .offset = 0 - }, - { -- .name = "filesystem", -- .size = 0x200000, -+ .name = "rootfs", -+ .size = 0x600000, - .offset = 0x200000 - }, -- { -- .name = "filesystem2", -- .size = 0x400000, -- .offset = 0x400000 -- } - }; - - /* Initialize the ones normally used. */ -Binary files linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.o and linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.o differ -Binary files linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/built-in.o and linux-2.6.19.2/arch/cris/arch-v10/drivers/built-in.o differ diff --git a/target/linux/etrax/patches/cris/009-sysfs.patch b/target/linux/etrax/patches/cris/009-sysfs.patch deleted file mode 100644 index 4988a20fc3..0000000000 --- a/target/linux/etrax/patches/cris/009-sysfs.patch +++ /dev/null @@ -1,83 +0,0 @@ ---- linux-2.6.19.2.orig/drivers/serial/crisv10.c 2007-05-26 18:12:33.000000000 +0200 -+++ linux-2.6.19.2/drivers/serial/crisv10.c 2007-05-26 19:24:56.000000000 +0200 -@@ -442,6 +442,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -4822,6 +4823,12 @@ - .tiocmset = rs_tiocmset - }; - -+#define CONFIG_ETRAX_SYSFS_NODES -+#ifdef CONFIG_ETRAX_SYSFS_NODES -+static struct class *mem_class; -+#endif -+ -+static struct class *rs_class; - static int __init - rs_init(void) - { -@@ -4948,6 +4955,30 @@ - #endif - #endif /* CONFIG_SVINTO_SIM */ - -+#ifdef CONFIG_ETRAX_SYSFS_NODES -+ -+ rs_class = class_create(THIS_MODULE, "rs_tty"); -+#ifdef CONFIG_ETRAX_SERIAL_PORT0 -+ class_device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 64), -+ NULL, "ttyS0"); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT1 -+ class_device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 65), -+ NULL, "ttyS1"); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT2 -+ class_device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 66), -+ NULL, "ttyS2"); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT3 -+ class_device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 67), -+ NULL, "ttyS3"); -+#endif -+#endif - return 0; - } - ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/Kconfig 2007-05-26 18:12:22.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/Kconfig 2007-05-26 19:26:06.000000000 +0200 -@@ -900,3 +900,9 @@ - 1 = 2kohm, 2 = 4kohm, 3 = 4kohm - 4 = 1 diode, 8 = 2 diodes - Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5 -+ -+config ETRAX_SYSFS_NODES -+ bool "Create device nodes using sysfs for builtin devices" -+ default n -+ help -+ Creates device nodes inside the rootfs dynamically for all the builtin devices ---- linux-2.6.19.2.orig/drivers/serial/crisv10.c 2007-05-28 20:37:56.000000000 +0200 -+++ linux-2.6.19.2/drivers/serial/crisv10.c 2007-05-28 20:39:07.000000000 +0200 -@@ -4823,12 +4823,11 @@ - .tiocmset = rs_tiocmset - }; - --#define CONFIG_ETRAX_SYSFS_NODES - #ifdef CONFIG_ETRAX_SYSFS_NODES --static struct class *mem_class; -+static struct class *rs_class; - #endif - --static struct class *rs_class; -+ - static int __init - rs_init(void) - { diff --git a/target/linux/etrax/patches/cris/010-multi-target-build.patch b/target/linux/etrax/patches/cris/010-multi-target-build.patch deleted file mode 100644 index 9d3a28b502..0000000000 --- a/target/linux/etrax/patches/cris/010-multi-target-build.patch +++ /dev/null @@ -1,1973 +0,0 @@ -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile 2007-05-28 16:28:34.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile 2007-05-28 17:24:26.000000000 +0200 -@@ -5,7 +5,7 @@ - OBJCOPY = /usr/local/cris/objcopy-cris - OBJCOPYFLAGS = -O binary --remove-section=.bss - --subdir- := compressed rescue -+subdir- := compressed - targets := Image - - $(obj)/Image: vmlinux FORCE -@@ -14,8 +14,12 @@ - - $(obj)/compressed/vmlinux: $(obj)/Image FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed $@ -- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin - - $(obj)/zImage: $(obj)/compressed/vmlinux - @cp $< $@ -+ @cp $(obj)/compressed/vmlinux $(obj)/zImage_custom -+ @cp $(obj)/compressed/vmlinux_MCM $(obj)/zImage_MCM -+ @cp $(obj)/compressed/vmlinux_416 $(obj)/zImage_416 -+ @cp $(obj)/compressed/vmlinux_816 $(obj)/zImage_816 -+ @cp $(obj)/compressed/vmlinux_832 $(obj)/zImage_832 - @echo ' Kernel: $@ is ready' -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-28 16:28:34.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-28 17:03:02.000000000 +0200 -@@ -17,18 +17,34 @@ - - $(obj)/decompress.o: $(OBJECTS) FORCE - $(call if_changed,ld) -+ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_MCM.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_MCM.o -+ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_416.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_416.o -+ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_816.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_816.o -+ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_832.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_832.o - - $(obj)/decompress.bin: $(obj)/decompress.o FORCE - $(call if_changed,objcopy) -+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_MCM.o $(obj)/decompress_MCM.bin -+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_416.o $(obj)/decompress_416.bin -+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_816.o $(obj)/decompress_816.bin -+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_832.o $(obj)/decompress_832.bin -+ -+$(obj)/head.o: $(obj)/head.S .config FORCE -+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c $< -o $@ -+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_MCM.S -o arch/cris/boot/compressed/head_MCM.o -+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_416.S -o arch/cris/boot/compressed/head_416.o -+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_816.S -o arch/cris/boot/compressed/head_816.o -+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_832.S -o arch/cris/boot/compressed/head_832.o - --$(obj)/head.o: $(obj)/head.S .config -- /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__ASSEMBLY__ -traditional -c $< -o $@ -- --$(obj)/misc.o: $(obj)/misc.c .config -+$(obj)/misc.o: $(obj)/misc.c .config FORCE - /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__KERNEL__ -c $< -o $@ - - $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE - $(call if_changed,image) -+ cat $(obj)/decompress_MCM.bin $(obj)/piggy.gz > $(obj)/vmlinux_MCM -+ cat $(obj)/decompress_416.bin $(obj)/piggy.gz > $(obj)/vmlinux_416 -+ cat $(obj)/decompress_816.bin $(obj)/piggy.gz > $(obj)/vmlinux_816 -+ cat $(obj)/decompress_832.bin $(obj)/piggy.gz > $(obj)/vmlinux_832 - - $(obj)/piggy.gz: $(obj)/../Image FORCE - $(call if_changed,gzip) -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S 2007-05-28 16:42:15.000000000 +0200 -@@ -0,0 +1,207 @@ -+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ -+ * -+ * DRAM/SDRAM initialization - alter with care -+ * This file is intended to be included from other assembler files -+ * -+ * Note: This file may not modify r9 because r9 is used to carry -+ * information from the decompresser to the kernel -+ * -+ * Copyright (C) 2000, 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ * -+ * $Log: dram_init.S,v $ -+ * Revision 1.5 2006/10/13 12:43:11 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.4 2003/09/22 09:21:59 starvik -+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx -+ * so we need to mask off 12 bits. -+ * -+ * Revision 1.3 2003/03/31 09:38:37 starvik -+ * Corrected calculation of end of sdram init commands -+ * -+ * Revision 1.2 2002/11/19 13:33:29 starvik -+ * Changes from Linux 2.4 -+ * -+ * Revision 1.13 2002/10/30 07:42:28 starvik -+ * Always read SDRAM command sequence from flash -+ * -+ * Revision 1.12 2002/08/09 11:37:37 orjanf -+ * Added double initialization work-around for Samsung SDRAMs. -+ * -+ * Revision 1.11 2002/06/04 11:43:21 starvik -+ * Check if mrs_data is specified in kernelconfig (necessary for MCM) -+ * -+ * Revision 1.10 2001/10/04 12:00:21 martinnn -+ * Added missing underscores. -+ * -+ * Revision 1.9 2001/10/01 14:47:35 bjornw -+ * Added register prefixes and removed underscores -+ * -+ * Revision 1.8 2001/05/15 07:12:45 hp -+ * Copy warning from head.S about r8 and r9 -+ * -+ * Revision 1.7 2001/04/18 12:05:39 bjornw -+ * Fixed comments, and explicitely include config.h to be sure its there -+ * -+ * Revision 1.6 2001/04/10 06:20:16 starvik -+ * Delay should be 200us, not 200ns -+ * -+ * Revision 1.5 2001/04/09 06:01:13 starvik -+ * Added support for 100 MHz SDRAMs -+ * -+ * Revision 1.4 2001/03/26 14:24:01 bjornw -+ * Namechange of some config options -+ * -+ * Revision 1.3 2001/03/23 08:29:41 starvik -+ * Corrected calculation of mrs_data -+ * -+ * Revision 1.2 2001/02/08 15:20:00 starvik -+ * Corrected SDRAM initialization -+ * Should now be included as inline -+ * -+ * Revision 1.1 2001/01/29 13:08:02 starvik -+ * Initial version -+ * This file should be included from all assembler files that needs to -+ * initialize DRAM/SDRAM. -+ * -+ */ -+ -+/* Just to be certain the config file is included, we include it here -+ * explicitely instead of depending on it being included in the file that -+ * uses this code. -+ */ -+ -+ -+ ;; WARNING! The registers r8 and r9 are used as parameters carrying -+ ;; information from the decompressor (if the kernel was compressed). -+ ;; They should not be used in the code below. -+ -+#ifndef CONFIG_SVINTO_SIM -+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 -+ move.d $r0, [R_WAITSTATES] -+ -+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 -+ move.d $r0, [R_BUS_CONFIG] -+ -+#ifndef CONFIG_ETRAX_SDRAM -+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 -+ move.d $r0, [R_DRAM_CONFIG] -+ -+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 -+ move.d $r0, [R_DRAM_TIMING] -+#else -+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. -+ moveq 2, $r6 -+_sdram_init: -+ -+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization -+ -+ ; Bank configuration -+ move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0 -+ move.d $r0, [R_SDRAM_CONFIG] -+ -+ ; Calculate value of mrs_data -+ ; CAS latency = 2 && bus_width = 32 => 0x40 -+ ; CAS latency = 3 && bus_width = 32 => 0x60 -+ ; CAS latency = 2 && bus_width = 16 => 0x20 -+ ; CAS latency = 3 && bus_width = 16 => 0x30 -+ -+ ; Check if value is already supplied in kernel config -+ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r2 -+ and.d 0x00ff0000, $r2 -+ bne _set_timing -+ lsrq 16, $r2 -+ -+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 -+ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1 -+ move.d $r1, $r3 -+ and.d 0x03, $r1 ; Get CAS latency -+ and.d 0x1000, $r3 ; 50 or 100 MHz? -+ beq _speed_50 -+ nop -+_speed_100: -+ cmp.d 0x00, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+ ba _bw_check -+ nop -+_speed_50: -+ cmp.d 0x01, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+_bw_check: -+ move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r1 -+ and.d 0x800000, $r1 ; DRAM width is bit 23 -+ bne _set_timing -+ nop -+ lsrq 1, $r2 ; 16 bits. Shift down value. -+ -+ ; Set timing parameters. Starts master clock -+_set_timing: -+ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1 -+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 -+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set -+ move.d $r1, $r5 -+ or.d 0x0000c000, $r1 ; ref = disable -+ lslq 16, $r2 ; mrs data starts at bit 16 -+ or.d $r2, $r1 -+ move.d $r1, [R_SDRAM_TIMING] -+ -+ ; Wait 200us -+ move.d 10000, $r2 -+1: bne 1b -+ subq 1, $r2 -+ -+ ; Issue initialization command sequence -+ move.d _sdram_commands_start, $r2 -+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash -+ move.d _sdram_commands_end, $r3 -+ and.d 0x000fffff, $r3 -+1: clear.d $r4 -+ move.b [$r2+], $r4 -+ lslq 9, $r4 ; Command starts at bit 9 -+ or.d $r1, $r4 -+ move.d $r4, [R_SDRAM_TIMING] -+ nop ; Wait five nop cycles between each command -+ nop -+ nop -+ nop -+ nop -+ cmp.d $r2, $r3 -+ bne 1b -+ nop -+ move.d $r5, [R_SDRAM_TIMING] -+ subq 1, $r6 -+ bne _sdram_init -+ nop -+ ba _sdram_commands_end -+ nop -+ -+_sdram_commands_start: -+ .byte 3 ; Precharge -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 1 ; mrs -+ .byte 0 ; nop -+_sdram_commands_end: -+#endif -+#endif -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S 2007-05-28 20:02:25.000000000 +0200 -@@ -0,0 +1,207 @@ -+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ -+ * -+ * DRAM/SDRAM initialization - alter with care -+ * This file is intended to be included from other assembler files -+ * -+ * Note: This file may not modify r9 because r9 is used to carry -+ * information from the decompresser to the kernel -+ * -+ * Copyright (C) 2000, 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ * -+ * $Log: dram_init.S,v $ -+ * Revision 1.5 2006/10/13 12:43:11 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.4 2003/09/22 09:21:59 starvik -+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx -+ * so we need to mask off 12 bits. -+ * -+ * Revision 1.3 2003/03/31 09:38:37 starvik -+ * Corrected calculation of end of sdram init commands -+ * -+ * Revision 1.2 2002/11/19 13:33:29 starvik -+ * Changes from Linux 2.4 -+ * -+ * Revision 1.13 2002/10/30 07:42:28 starvik -+ * Always read SDRAM command sequence from flash -+ * -+ * Revision 1.12 2002/08/09 11:37:37 orjanf -+ * Added double initialization work-around for Samsung SDRAMs. -+ * -+ * Revision 1.11 2002/06/04 11:43:21 starvik -+ * Check if mrs_data is specified in kernelconfig (necessary for MCM) -+ * -+ * Revision 1.10 2001/10/04 12:00:21 martinnn -+ * Added missing underscores. -+ * -+ * Revision 1.9 2001/10/01 14:47:35 bjornw -+ * Added register prefixes and removed underscores -+ * -+ * Revision 1.8 2001/05/15 07:12:45 hp -+ * Copy warning from head.S about r8 and r9 -+ * -+ * Revision 1.7 2001/04/18 12:05:39 bjornw -+ * Fixed comments, and explicitely include config.h to be sure its there -+ * -+ * Revision 1.6 2001/04/10 06:20:16 starvik -+ * Delay should be 200us, not 200ns -+ * -+ * Revision 1.5 2001/04/09 06:01:13 starvik -+ * Added support for 100 MHz SDRAMs -+ * -+ * Revision 1.4 2001/03/26 14:24:01 bjornw -+ * Namechange of some config options -+ * -+ * Revision 1.3 2001/03/23 08:29:41 starvik -+ * Corrected calculation of mrs_data -+ * -+ * Revision 1.2 2001/02/08 15:20:00 starvik -+ * Corrected SDRAM initialization -+ * Should now be included as inline -+ * -+ * Revision 1.1 2001/01/29 13:08:02 starvik -+ * Initial version -+ * This file should be included from all assembler files that needs to -+ * initialize DRAM/SDRAM. -+ * -+ */ -+ -+/* Just to be certain the config file is included, we include it here -+ * explicitely instead of depending on it being included in the file that -+ * uses this code. -+ */ -+ -+ -+ ;; WARNING! The registers r8 and r9 are used as parameters carrying -+ ;; information from the decompressor (if the kernel was compressed). -+ ;; They should not be used in the code below. -+ -+#ifndef CONFIG_SVINTO_SIM -+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 -+ move.d $r0, [R_WAITSTATES] -+ -+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 -+ move.d $r0, [R_BUS_CONFIG] -+ -+#ifndef CONFIG_ETRAX_SDRAM -+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 -+ move.d $r0, [R_DRAM_CONFIG] -+ -+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 -+ move.d $r0, [R_DRAM_TIMING] -+#else -+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. -+ moveq 2, $r6 -+_sdram_init: -+ -+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization -+ -+ ; Bank configuration -+ move.d 0x09603636, $r0 -+ move.d $r0, [R_SDRAM_CONFIG] -+ -+ ; Calculate value of mrs_data -+ ; CAS latency = 2 && bus_width = 32 => 0x40 -+ ; CAS latency = 3 && bus_width = 32 => 0x60 -+ ; CAS latency = 2 && bus_width = 16 => 0x20 -+ ; CAS latency = 3 && bus_width = 16 => 0x30 -+ -+ ; Check if value is already supplied in kernel config -+ move.d 0x80008002, $r2 -+ and.d 0x00ff0000, $r2 -+ bne _set_timing -+ lsrq 16, $r2 -+ -+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 -+ move.d 0x80008002, $r1 -+ move.d $r1, $r3 -+ and.d 0x03, $r1 ; Get CAS latency -+ and.d 0x1000, $r3 ; 50 or 100 MHz? -+ beq _speed_50 -+ nop -+_speed_100: -+ cmp.d 0x00, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+ ba _bw_check -+ nop -+_speed_50: -+ cmp.d 0x01, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+_bw_check: -+ move.d 0x09603636, $r1 -+ and.d 0x800000, $r1 ; DRAM width is bit 23 -+ bne _set_timing -+ nop -+ lsrq 1, $r2 ; 16 bits. Shift down value. -+ -+ ; Set timing parameters. Starts master clock -+_set_timing: -+ move.d 0x80008002, $r1 -+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 -+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set -+ move.d $r1, $r5 -+ or.d 0x0000c000, $r1 ; ref = disable -+ lslq 16, $r2 ; mrs data starts at bit 16 -+ or.d $r2, $r1 -+ move.d $r1, [R_SDRAM_TIMING] -+ -+ ; Wait 200us -+ move.d 10000, $r2 -+1: bne 1b -+ subq 1, $r2 -+ -+ ; Issue initialization command sequence -+ move.d _sdram_commands_start, $r2 -+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash -+ move.d _sdram_commands_end, $r3 -+ and.d 0x000fffff, $r3 -+1: clear.d $r4 -+ move.b [$r2+], $r4 -+ lslq 9, $r4 ; Command starts at bit 9 -+ or.d $r1, $r4 -+ move.d $r4, [R_SDRAM_TIMING] -+ nop ; Wait five nop cycles between each command -+ nop -+ nop -+ nop -+ nop -+ cmp.d $r2, $r3 -+ bne 1b -+ nop -+ move.d $r5, [R_SDRAM_TIMING] -+ subq 1, $r6 -+ bne _sdram_init -+ nop -+ ba _sdram_commands_end -+ nop -+ -+_sdram_commands_start: -+ .byte 3 ; Precharge -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 1 ; mrs -+ .byte 0 ; nop -+_sdram_commands_end: -+#endif -+#endif -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S 2007-05-28 20:04:05.000000000 +0200 -@@ -0,0 +1,207 @@ -+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ -+ * -+ * DRAM/SDRAM initialization - alter with care -+ * This file is intended to be included from other assembler files -+ * -+ * Note: This file may not modify r9 because r9 is used to carry -+ * information from the decompresser to the kernel -+ * -+ * Copyright (C) 2000, 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ * -+ * $Log: dram_init.S,v $ -+ * Revision 1.5 2006/10/13 12:43:11 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.4 2003/09/22 09:21:59 starvik -+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx -+ * so we need to mask off 12 bits. -+ * -+ * Revision 1.3 2003/03/31 09:38:37 starvik -+ * Corrected calculation of end of sdram init commands -+ * -+ * Revision 1.2 2002/11/19 13:33:29 starvik -+ * Changes from Linux 2.4 -+ * -+ * Revision 1.13 2002/10/30 07:42:28 starvik -+ * Always read SDRAM command sequence from flash -+ * -+ * Revision 1.12 2002/08/09 11:37:37 orjanf -+ * Added double initialization work-around for Samsung SDRAMs. -+ * -+ * Revision 1.11 2002/06/04 11:43:21 starvik -+ * Check if mrs_data is specified in kernelconfig (necessary for MCM) -+ * -+ * Revision 1.10 2001/10/04 12:00:21 martinnn -+ * Added missing underscores. -+ * -+ * Revision 1.9 2001/10/01 14:47:35 bjornw -+ * Added register prefixes and removed underscores -+ * -+ * Revision 1.8 2001/05/15 07:12:45 hp -+ * Copy warning from head.S about r8 and r9 -+ * -+ * Revision 1.7 2001/04/18 12:05:39 bjornw -+ * Fixed comments, and explicitely include config.h to be sure its there -+ * -+ * Revision 1.6 2001/04/10 06:20:16 starvik -+ * Delay should be 200us, not 200ns -+ * -+ * Revision 1.5 2001/04/09 06:01:13 starvik -+ * Added support for 100 MHz SDRAMs -+ * -+ * Revision 1.4 2001/03/26 14:24:01 bjornw -+ * Namechange of some config options -+ * -+ * Revision 1.3 2001/03/23 08:29:41 starvik -+ * Corrected calculation of mrs_data -+ * -+ * Revision 1.2 2001/02/08 15:20:00 starvik -+ * Corrected SDRAM initialization -+ * Should now be included as inline -+ * -+ * Revision 1.1 2001/01/29 13:08:02 starvik -+ * Initial version -+ * This file should be included from all assembler files that needs to -+ * initialize DRAM/SDRAM. -+ * -+ */ -+ -+/* Just to be certain the config file is included, we include it here -+ * explicitely instead of depending on it being included in the file that -+ * uses this code. -+ */ -+ -+ -+ ;; WARNING! The registers r8 and r9 are used as parameters carrying -+ ;; information from the decompressor (if the kernel was compressed). -+ ;; They should not be used in the code below. -+ -+#ifndef CONFIG_SVINTO_SIM -+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 -+ move.d $r0, [R_WAITSTATES] -+ -+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 -+ move.d $r0, [R_BUS_CONFIG] -+ -+#ifndef CONFIG_ETRAX_SDRAM -+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 -+ move.d $r0, [R_DRAM_CONFIG] -+ -+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 -+ move.d $r0, [R_DRAM_TIMING] -+#else -+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. -+ moveq 2, $r6 -+_sdram_init: -+ -+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization -+ -+ ; Bank configuration -+ move.d 0x09603636, $r0 -+ move.d $r0, [R_SDRAM_CONFIG] -+ -+ ; Calculate value of mrs_data -+ ; CAS latency = 2 && bus_width = 32 => 0x40 -+ ; CAS latency = 3 && bus_width = 32 => 0x60 -+ ; CAS latency = 2 && bus_width = 16 => 0x20 -+ ; CAS latency = 3 && bus_width = 16 => 0x30 -+ -+ ; Check if value is already supplied in kernel config -+ move.d 0x80008002, $r2 -+ and.d 0x00ff0000, $r2 -+ bne _set_timing -+ lsrq 16, $r2 -+ -+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 -+ move.d 0x80008002, $r1 -+ move.d $r1, $r3 -+ and.d 0x03, $r1 ; Get CAS latency -+ and.d 0x1000, $r3 ; 50 or 100 MHz? -+ beq _speed_50 -+ nop -+_speed_100: -+ cmp.d 0x00, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+ ba _bw_check -+ nop -+_speed_50: -+ cmp.d 0x01, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+_bw_check: -+ move.d 0x09603636, $r1 -+ and.d 0x800000, $r1 ; DRAM width is bit 23 -+ bne _set_timing -+ nop -+ lsrq 1, $r2 ; 16 bits. Shift down value. -+ -+ ; Set timing parameters. Starts master clock -+_set_timing: -+ move.d 0x80008002, $r1 -+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 -+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set -+ move.d $r1, $r5 -+ or.d 0x0000c000, $r1 ; ref = disable -+ lslq 16, $r2 ; mrs data starts at bit 16 -+ or.d $r2, $r1 -+ move.d $r1, [R_SDRAM_TIMING] -+ -+ ; Wait 200us -+ move.d 10000, $r2 -+1: bne 1b -+ subq 1, $r2 -+ -+ ; Issue initialization command sequence -+ move.d _sdram_commands_start, $r2 -+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash -+ move.d _sdram_commands_end, $r3 -+ and.d 0x000fffff, $r3 -+1: clear.d $r4 -+ move.b [$r2+], $r4 -+ lslq 9, $r4 ; Command starts at bit 9 -+ or.d $r1, $r4 -+ move.d $r4, [R_SDRAM_TIMING] -+ nop ; Wait five nop cycles between each command -+ nop -+ nop -+ nop -+ nop -+ cmp.d $r2, $r3 -+ bne 1b -+ nop -+ move.d $r5, [R_SDRAM_TIMING] -+ subq 1, $r6 -+ bne _sdram_init -+ nop -+ ba _sdram_commands_end -+ nop -+ -+_sdram_commands_start: -+ .byte 3 ; Precharge -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 1 ; mrs -+ .byte 0 ; nop -+_sdram_commands_end: -+#endif -+#endif -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S 2007-05-28 20:04:57.000000000 +0200 -@@ -0,0 +1,207 @@ -+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ -+ * -+ * DRAM/SDRAM initialization - alter with care -+ * This file is intended to be included from other assembler files -+ * -+ * Note: This file may not modify r9 because r9 is used to carry -+ * information from the decompresser to the kernel -+ * -+ * Copyright (C) 2000, 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ * -+ * $Log: dram_init.S,v $ -+ * Revision 1.5 2006/10/13 12:43:11 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.4 2003/09/22 09:21:59 starvik -+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx -+ * so we need to mask off 12 bits. -+ * -+ * Revision 1.3 2003/03/31 09:38:37 starvik -+ * Corrected calculation of end of sdram init commands -+ * -+ * Revision 1.2 2002/11/19 13:33:29 starvik -+ * Changes from Linux 2.4 -+ * -+ * Revision 1.13 2002/10/30 07:42:28 starvik -+ * Always read SDRAM command sequence from flash -+ * -+ * Revision 1.12 2002/08/09 11:37:37 orjanf -+ * Added double initialization work-around for Samsung SDRAMs. -+ * -+ * Revision 1.11 2002/06/04 11:43:21 starvik -+ * Check if mrs_data is specified in kernelconfig (necessary for MCM) -+ * -+ * Revision 1.10 2001/10/04 12:00:21 martinnn -+ * Added missing underscores. -+ * -+ * Revision 1.9 2001/10/01 14:47:35 bjornw -+ * Added register prefixes and removed underscores -+ * -+ * Revision 1.8 2001/05/15 07:12:45 hp -+ * Copy warning from head.S about r8 and r9 -+ * -+ * Revision 1.7 2001/04/18 12:05:39 bjornw -+ * Fixed comments, and explicitely include config.h to be sure its there -+ * -+ * Revision 1.6 2001/04/10 06:20:16 starvik -+ * Delay should be 200us, not 200ns -+ * -+ * Revision 1.5 2001/04/09 06:01:13 starvik -+ * Added support for 100 MHz SDRAMs -+ * -+ * Revision 1.4 2001/03/26 14:24:01 bjornw -+ * Namechange of some config options -+ * -+ * Revision 1.3 2001/03/23 08:29:41 starvik -+ * Corrected calculation of mrs_data -+ * -+ * Revision 1.2 2001/02/08 15:20:00 starvik -+ * Corrected SDRAM initialization -+ * Should now be included as inline -+ * -+ * Revision 1.1 2001/01/29 13:08:02 starvik -+ * Initial version -+ * This file should be included from all assembler files that needs to -+ * initialize DRAM/SDRAM. -+ * -+ */ -+ -+/* Just to be certain the config file is included, we include it here -+ * explicitely instead of depending on it being included in the file that -+ * uses this code. -+ */ -+ -+ -+ ;; WARNING! The registers r8 and r9 are used as parameters carrying -+ ;; information from the decompressor (if the kernel was compressed). -+ ;; They should not be used in the code below. -+ -+#ifndef CONFIG_SVINTO_SIM -+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 -+ move.d $r0, [R_WAITSTATES] -+ -+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 -+ move.d $r0, [R_BUS_CONFIG] -+ -+#ifndef CONFIG_ETRAX_SDRAM -+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 -+ move.d $r0, [R_DRAM_CONFIG] -+ -+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 -+ move.d $r0, [R_DRAM_TIMING] -+#else -+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. -+ moveq 2, $r6 -+_sdram_init: -+ -+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization -+ -+ ; Bank configuration -+ move.d 0x09603737, $r0 -+ move.d $r0, [R_SDRAM_CONFIG] -+ -+ ; Calculate value of mrs_data -+ ; CAS latency = 2 && bus_width = 32 => 0x40 -+ ; CAS latency = 3 && bus_width = 32 => 0x60 -+ ; CAS latency = 2 && bus_width = 16 => 0x20 -+ ; CAS latency = 3 && bus_width = 16 => 0x30 -+ -+ ; Check if value is already supplied in kernel config -+ move.d 0x80008002, $r2 -+ and.d 0x00ff0000, $r2 -+ bne _set_timing -+ lsrq 16, $r2 -+ -+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 -+ move.d 0x80008002, $r1 -+ move.d $r1, $r3 -+ and.d 0x03, $r1 ; Get CAS latency -+ and.d 0x1000, $r3 ; 50 or 100 MHz? -+ beq _speed_50 -+ nop -+_speed_100: -+ cmp.d 0x00, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+ ba _bw_check -+ nop -+_speed_50: -+ cmp.d 0x01, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+_bw_check: -+ move.d 0x09603737, $r1 -+ and.d 0x800000, $r1 ; DRAM width is bit 23 -+ bne _set_timing -+ nop -+ lsrq 1, $r2 ; 16 bits. Shift down value. -+ -+ ; Set timing parameters. Starts master clock -+_set_timing: -+ move.d 0x80008002, $r1 -+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 -+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set -+ move.d $r1, $r5 -+ or.d 0x0000c000, $r1 ; ref = disable -+ lslq 16, $r2 ; mrs data starts at bit 16 -+ or.d $r2, $r1 -+ move.d $r1, [R_SDRAM_TIMING] -+ -+ ; Wait 200us -+ move.d 10000, $r2 -+1: bne 1b -+ subq 1, $r2 -+ -+ ; Issue initialization command sequence -+ move.d _sdram_commands_start, $r2 -+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash -+ move.d _sdram_commands_end, $r3 -+ and.d 0x000fffff, $r3 -+1: clear.d $r4 -+ move.b [$r2+], $r4 -+ lslq 9, $r4 ; Command starts at bit 9 -+ or.d $r1, $r4 -+ move.d $r4, [R_SDRAM_TIMING] -+ nop ; Wait five nop cycles between each command -+ nop -+ nop -+ nop -+ nop -+ cmp.d $r2, $r3 -+ bne 1b -+ nop -+ move.d $r5, [R_SDRAM_TIMING] -+ subq 1, $r6 -+ bne _sdram_init -+ nop -+ ba _sdram_commands_end -+ nop -+ -+_sdram_commands_start: -+ .byte 3 ; Precharge -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 1 ; mrs -+ .byte 0 ; nop -+_sdram_commands_end: -+#endif -+#endif -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S 2007-05-28 20:03:13.000000000 +0200 -@@ -0,0 +1,207 @@ -+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ -+ * -+ * DRAM/SDRAM initialization - alter with care -+ * This file is intended to be included from other assembler files -+ * -+ * Note: This file may not modify r9 because r9 is used to carry -+ * information from the decompresser to the kernel -+ * -+ * Copyright (C) 2000, 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ * -+ * $Log: dram_init.S,v $ -+ * Revision 1.5 2006/10/13 12:43:11 starvik -+ * Merge of 2.6.18 -+ * -+ * Revision 1.4 2003/09/22 09:21:59 starvik -+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx -+ * so we need to mask off 12 bits. -+ * -+ * Revision 1.3 2003/03/31 09:38:37 starvik -+ * Corrected calculation of end of sdram init commands -+ * -+ * Revision 1.2 2002/11/19 13:33:29 starvik -+ * Changes from Linux 2.4 -+ * -+ * Revision 1.13 2002/10/30 07:42:28 starvik -+ * Always read SDRAM command sequence from flash -+ * -+ * Revision 1.12 2002/08/09 11:37:37 orjanf -+ * Added double initialization work-around for Samsung SDRAMs. -+ * -+ * Revision 1.11 2002/06/04 11:43:21 starvik -+ * Check if mrs_data is specified in kernelconfig (necessary for MCM) -+ * -+ * Revision 1.10 2001/10/04 12:00:21 martinnn -+ * Added missing underscores. -+ * -+ * Revision 1.9 2001/10/01 14:47:35 bjornw -+ * Added register prefixes and removed underscores -+ * -+ * Revision 1.8 2001/05/15 07:12:45 hp -+ * Copy warning from head.S about r8 and r9 -+ * -+ * Revision 1.7 2001/04/18 12:05:39 bjornw -+ * Fixed comments, and explicitely include config.h to be sure its there -+ * -+ * Revision 1.6 2001/04/10 06:20:16 starvik -+ * Delay should be 200us, not 200ns -+ * -+ * Revision 1.5 2001/04/09 06:01:13 starvik -+ * Added support for 100 MHz SDRAMs -+ * -+ * Revision 1.4 2001/03/26 14:24:01 bjornw -+ * Namechange of some config options -+ * -+ * Revision 1.3 2001/03/23 08:29:41 starvik -+ * Corrected calculation of mrs_data -+ * -+ * Revision 1.2 2001/02/08 15:20:00 starvik -+ * Corrected SDRAM initialization -+ * Should now be included as inline -+ * -+ * Revision 1.1 2001/01/29 13:08:02 starvik -+ * Initial version -+ * This file should be included from all assembler files that needs to -+ * initialize DRAM/SDRAM. -+ * -+ */ -+ -+/* Just to be certain the config file is included, we include it here -+ * explicitely instead of depending on it being included in the file that -+ * uses this code. -+ */ -+ -+ -+ ;; WARNING! The registers r8 and r9 are used as parameters carrying -+ ;; information from the decompressor (if the kernel was compressed). -+ ;; They should not be used in the code below. -+ -+#ifndef CONFIG_SVINTO_SIM -+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 -+ move.d $r0, [R_WAITSTATES] -+ -+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 -+ move.d $r0, [R_BUS_CONFIG] -+ -+#ifndef CONFIG_ETRAX_SDRAM -+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 -+ move.d $r0, [R_DRAM_CONFIG] -+ -+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 -+ move.d $r0, [R_DRAM_TIMING] -+#else -+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. -+ moveq 2, $r6 -+_sdram_init: -+ -+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization -+ -+ ; Bank configuration -+ move.d 0x09603636, $r0 -+ move.d $r0, [R_SDRAM_CONFIG] -+ -+ ; Calculate value of mrs_data -+ ; CAS latency = 2 && bus_width = 32 => 0x40 -+ ; CAS latency = 3 && bus_width = 32 => 0x60 -+ ; CAS latency = 2 && bus_width = 16 => 0x20 -+ ; CAS latency = 3 && bus_width = 16 => 0x30 -+ -+ ; Check if value is already supplied in kernel config -+ move.d 0x80608002, $r2 -+ and.d 0x00ff0000, $r2 -+ bne _set_timing -+ lsrq 16, $r2 -+ -+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 -+ move.d 0x80608002, $r1 -+ move.d $r1, $r3 -+ and.d 0x03, $r1 ; Get CAS latency -+ and.d 0x1000, $r3 ; 50 or 100 MHz? -+ beq _speed_50 -+ nop -+_speed_100: -+ cmp.d 0x00, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+ ba _bw_check -+ nop -+_speed_50: -+ cmp.d 0x01, $r1 ; CAS latency = 2? -+ beq _bw_check -+ nop -+ or.d 0x20, $r2 ; CAS latency = 3 -+_bw_check: -+ move.d 0x09603636, $r1 -+ and.d 0x800000, $r1 ; DRAM width is bit 23 -+ bne _set_timing -+ nop -+ lsrq 1, $r2 ; 16 bits. Shift down value. -+ -+ ; Set timing parameters. Starts master clock -+_set_timing: -+ move.d 0x80608002, $r1 -+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 -+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set -+ move.d $r1, $r5 -+ or.d 0x0000c000, $r1 ; ref = disable -+ lslq 16, $r2 ; mrs data starts at bit 16 -+ or.d $r2, $r1 -+ move.d $r1, [R_SDRAM_TIMING] -+ -+ ; Wait 200us -+ move.d 10000, $r2 -+1: bne 1b -+ subq 1, $r2 -+ -+ ; Issue initialization command sequence -+ move.d _sdram_commands_start, $r2 -+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash -+ move.d _sdram_commands_end, $r3 -+ and.d 0x000fffff, $r3 -+1: clear.d $r4 -+ move.b [$r2+], $r4 -+ lslq 9, $r4 ; Command starts at bit 9 -+ or.d $r1, $r4 -+ move.d $r4, [R_SDRAM_TIMING] -+ nop ; Wait five nop cycles between each command -+ nop -+ nop -+ nop -+ nop -+ cmp.d $r2, $r3 -+ bne 1b -+ nop -+ move.d $r5, [R_SDRAM_TIMING] -+ subq 1, $r6 -+ bne _sdram_init -+ nop -+ ba _sdram_commands_end -+ nop -+ -+_sdram_commands_start: -+ .byte 3 ; Precharge -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 2 ; refresh -+ .byte 0 ; nop -+ .byte 1 ; mrs -+ .byte 0 ; nop -+_sdram_commands_end: -+#endif -+#endif -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S 2007-05-28 17:16:28.000000000 +0200 -@@ -0,0 +1,126 @@ -+/* -+ * arch/cris/boot/compressed/head.S -+ * -+ * Copyright (C) 1999, 2001 Axis Communications AB -+ * -+ * Code that sets up the DRAM registers, calls the -+ * decompressor to unpack the piggybacked kernel, and jumps. -+ * -+ */ -+ -+#define ASSEMBLER_MACROS_ONLY -+#include -+ -+#define RAM_INIT_MAGIC 0x56902387 -+#define COMMAND_LINE_MAGIC 0x87109563 -+ -+ ;; Exported symbols -+ -+ .globl _input_data -+ -+ -+ .text -+ -+ nop -+ di -+ -+;; We need to initialze DRAM registers before we start using the DRAM -+ -+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? -+ beq dram_init_finished -+ nop -+ -+#include "dram_init_416.S" -+ -+dram_init_finished: -+ -+ ;; Initiate the PA and PB ports -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 -+ move.b r0, [R_PORT_PA_DATA] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 -+ move.b r0, [R_PORT_PA_DIR] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 -+ move.b r0, [R_PORT_PB_DATA] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 -+ move.b r0, [R_PORT_PB_DIR] -+ -+ ;; Setup the stack to a suitably high address. -+ ;; We assume 8 MB is the minimum DRAM in an eLinux -+ ;; product and put the sp at the top for now. -+ -+ move.d 0x40800000, sp -+ -+ ;; Figure out where the compressed piggyback image is -+ ;; in the flash (since we wont try to copy it to DRAM -+ ;; before unpacking). It is at _edata, but in flash. -+ ;; Use (_edata - basse) as offset to the current PC. -+ -+basse: move.d pc, r5 -+ and.d 0x7fffffff, r5 ; strip any non-cache bit -+ subq 2, r5 ; compensate for the move.d pc instr -+ move.d r5, r0 ; save for later - flash address of 'basse' -+ add.d _edata, r5 -+ sub.d basse, r5 ; r5 = flash address of '_edata' -+ -+ ;; Copy text+data to DRAM -+ -+ move.d basse, r1 ; destination -+ move.d _edata, r2 ; end destination -+1: move.w [r0+], r3 -+ move.w r3, [r1+] -+ cmp.d r2, r1 -+ bcs 1b -+ nop -+ -+ move.d r5, [_input_data] ; for the decompressor -+ -+ -+ ;; Clear the decompressors BSS (between _edata and _end) -+ -+ moveq 0, r0 -+ move.d _edata, r1 -+ move.d _end, r2 -+1: move.w r0, [r1+] -+ cmp.d r2, r1 -+ bcs 1b -+ nop -+ -+ ;; Save command line magic and address. -+ move.d _cmd_line_magic, $r12 -+ move.d $r10, [$r12] -+ move.d _cmd_line_addr, $r12 -+ move.d $r11, [$r12] -+ -+ ;; Do the decompression and save compressed size in _inptr -+ -+ jsr _decompress_kernel -+ -+ ;; Put start address of root partition in r9 so the kernel can use it -+ ;; when mounting from flash -+ -+ move.d [_input_data], r9 ; flash address of compressed kernel -+ add.d [_inptr], r9 ; size of compressed kernel -+ -+ ;; Restore command line magic and address. -+ move.d _cmd_line_magic, $r10 -+ move.d [$r10], $r10 -+ move.d _cmd_line_addr, $r11 -+ move.d [$r11], $r11 -+ -+ ;; Enter the decompressed kernel -+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized -+ jump 0x40004000 ; kernel is linked to this address -+ -+ .data -+ -+_input_data: -+ .dword 0 ; used by the decompressor -+_cmd_line_magic: -+ .dword 0 -+_cmd_line_addr: -+ .dword 0 -+#include "hw_settings_416.S" -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S 2007-05-28 17:16:58.000000000 +0200 -@@ -0,0 +1,126 @@ -+/* -+ * arch/cris/boot/compressed/head.S -+ * -+ * Copyright (C) 1999, 2001 Axis Communications AB -+ * -+ * Code that sets up the DRAM registers, calls the -+ * decompressor to unpack the piggybacked kernel, and jumps. -+ * -+ */ -+ -+#define ASSEMBLER_MACROS_ONLY -+#include -+ -+#define RAM_INIT_MAGIC 0x56902387 -+#define COMMAND_LINE_MAGIC 0x87109563 -+ -+ ;; Exported symbols -+ -+ .globl _input_data -+ -+ -+ .text -+ -+ nop -+ di -+ -+;; We need to initialze DRAM registers before we start using the DRAM -+ -+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? -+ beq dram_init_finished -+ nop -+ -+#include "dram_init_816.S" -+ -+dram_init_finished: -+ -+ ;; Initiate the PA and PB ports -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 -+ move.b r0, [R_PORT_PA_DATA] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 -+ move.b r0, [R_PORT_PA_DIR] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 -+ move.b r0, [R_PORT_PB_DATA] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 -+ move.b r0, [R_PORT_PB_DIR] -+ -+ ;; Setup the stack to a suitably high address. -+ ;; We assume 8 MB is the minimum DRAM in an eLinux -+ ;; product and put the sp at the top for now. -+ -+ move.d 0x40800000, sp -+ -+ ;; Figure out where the compressed piggyback image is -+ ;; in the flash (since we wont try to copy it to DRAM -+ ;; before unpacking). It is at _edata, but in flash. -+ ;; Use (_edata - basse) as offset to the current PC. -+ -+basse: move.d pc, r5 -+ and.d 0x7fffffff, r5 ; strip any non-cache bit -+ subq 2, r5 ; compensate for the move.d pc instr -+ move.d r5, r0 ; save for later - flash address of 'basse' -+ add.d _edata, r5 -+ sub.d basse, r5 ; r5 = flash address of '_edata' -+ -+ ;; Copy text+data to DRAM -+ -+ move.d basse, r1 ; destination -+ move.d _edata, r2 ; end destination -+1: move.w [r0+], r3 -+ move.w r3, [r1+] -+ cmp.d r2, r1 -+ bcs 1b -+ nop -+ -+ move.d r5, [_input_data] ; for the decompressor -+ -+ -+ ;; Clear the decompressors BSS (between _edata and _end) -+ -+ moveq 0, r0 -+ move.d _edata, r1 -+ move.d _end, r2 -+1: move.w r0, [r1+] -+ cmp.d r2, r1 -+ bcs 1b -+ nop -+ -+ ;; Save command line magic and address. -+ move.d _cmd_line_magic, $r12 -+ move.d $r10, [$r12] -+ move.d _cmd_line_addr, $r12 -+ move.d $r11, [$r12] -+ -+ ;; Do the decompression and save compressed size in _inptr -+ -+ jsr _decompress_kernel -+ -+ ;; Put start address of root partition in r9 so the kernel can use it -+ ;; when mounting from flash -+ -+ move.d [_input_data], r9 ; flash address of compressed kernel -+ add.d [_inptr], r9 ; size of compressed kernel -+ -+ ;; Restore command line magic and address. -+ move.d _cmd_line_magic, $r10 -+ move.d [$r10], $r10 -+ move.d _cmd_line_addr, $r11 -+ move.d [$r11], $r11 -+ -+ ;; Enter the decompressed kernel -+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized -+ jump 0x40004000 ; kernel is linked to this address -+ -+ .data -+ -+_input_data: -+ .dword 0 ; used by the decompressor -+_cmd_line_magic: -+ .dword 0 -+_cmd_line_addr: -+ .dword 0 -+#include "hw_settings_816.S" -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S 2007-05-28 17:17:12.000000000 +0200 -@@ -0,0 +1,126 @@ -+/* -+ * arch/cris/boot/compressed/head.S -+ * -+ * Copyright (C) 1999, 2001 Axis Communications AB -+ * -+ * Code that sets up the DRAM registers, calls the -+ * decompressor to unpack the piggybacked kernel, and jumps. -+ * -+ */ -+ -+#define ASSEMBLER_MACROS_ONLY -+#include -+ -+#define RAM_INIT_MAGIC 0x56902387 -+#define COMMAND_LINE_MAGIC 0x87109563 -+ -+ ;; Exported symbols -+ -+ .globl _input_data -+ -+ -+ .text -+ -+ nop -+ di -+ -+;; We need to initialze DRAM registers before we start using the DRAM -+ -+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? -+ beq dram_init_finished -+ nop -+ -+#include "dram_init_832.S" -+ -+dram_init_finished: -+ -+ ;; Initiate the PA and PB ports -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 -+ move.b r0, [R_PORT_PA_DATA] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 -+ move.b r0, [R_PORT_PA_DIR] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 -+ move.b r0, [R_PORT_PB_DATA] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 -+ move.b r0, [R_PORT_PB_DIR] -+ -+ ;; Setup the stack to a suitably high address. -+ ;; We assume 8 MB is the minimum DRAM in an eLinux -+ ;; product and put the sp at the top for now. -+ -+ move.d 0x40800000, sp -+ -+ ;; Figure out where the compressed piggyback image is -+ ;; in the flash (since we wont try to copy it to DRAM -+ ;; before unpacking). It is at _edata, but in flash. -+ ;; Use (_edata - basse) as offset to the current PC. -+ -+basse: move.d pc, r5 -+ and.d 0x7fffffff, r5 ; strip any non-cache bit -+ subq 2, r5 ; compensate for the move.d pc instr -+ move.d r5, r0 ; save for later - flash address of 'basse' -+ add.d _edata, r5 -+ sub.d basse, r5 ; r5 = flash address of '_edata' -+ -+ ;; Copy text+data to DRAM -+ -+ move.d basse, r1 ; destination -+ move.d _edata, r2 ; end destination -+1: move.w [r0+], r3 -+ move.w r3, [r1+] -+ cmp.d r2, r1 -+ bcs 1b -+ nop -+ -+ move.d r5, [_input_data] ; for the decompressor -+ -+ -+ ;; Clear the decompressors BSS (between _edata and _end) -+ -+ moveq 0, r0 -+ move.d _edata, r1 -+ move.d _end, r2 -+1: move.w r0, [r1+] -+ cmp.d r2, r1 -+ bcs 1b -+ nop -+ -+ ;; Save command line magic and address. -+ move.d _cmd_line_magic, $r12 -+ move.d $r10, [$r12] -+ move.d _cmd_line_addr, $r12 -+ move.d $r11, [$r12] -+ -+ ;; Do the decompression and save compressed size in _inptr -+ -+ jsr _decompress_kernel -+ -+ ;; Put start address of root partition in r9 so the kernel can use it -+ ;; when mounting from flash -+ -+ move.d [_input_data], r9 ; flash address of compressed kernel -+ add.d [_inptr], r9 ; size of compressed kernel -+ -+ ;; Restore command line magic and address. -+ move.d _cmd_line_magic, $r10 -+ move.d [$r10], $r10 -+ move.d _cmd_line_addr, $r11 -+ move.d [$r11], $r11 -+ -+ ;; Enter the decompressed kernel -+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized -+ jump 0x40004000 ; kernel is linked to this address -+ -+ .data -+ -+_input_data: -+ .dword 0 ; used by the decompressor -+_cmd_line_magic: -+ .dword 0 -+_cmd_line_addr: -+ .dword 0 -+#include "hw_settings_832.S" -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S 2007-05-28 17:17:51.000000000 +0200 -@@ -0,0 +1,126 @@ -+/* -+ * arch/cris/boot/compressed/head.S -+ * -+ * Copyright (C) 1999, 2001 Axis Communications AB -+ * -+ * Code that sets up the DRAM registers, calls the -+ * decompressor to unpack the piggybacked kernel, and jumps. -+ * -+ */ -+ -+#define ASSEMBLER_MACROS_ONLY -+#include -+ -+#define RAM_INIT_MAGIC 0x56902387 -+#define COMMAND_LINE_MAGIC 0x87109563 -+ -+ ;; Exported symbols -+ -+ .globl _input_data -+ -+ -+ .text -+ -+ nop -+ di -+ -+;; We need to initialze DRAM registers before we start using the DRAM -+ -+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? -+ beq dram_init_finished -+ nop -+ -+#include "dram_init_MCM.S" -+ -+dram_init_finished: -+ -+ ;; Initiate the PA and PB ports -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 -+ move.b r0, [R_PORT_PA_DATA] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 -+ move.b r0, [R_PORT_PA_DIR] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 -+ move.b r0, [R_PORT_PB_DATA] -+ -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 -+ move.b r0, [R_PORT_PB_DIR] -+ -+ ;; Setup the stack to a suitably high address. -+ ;; We assume 8 MB is the minimum DRAM in an eLinux -+ ;; product and put the sp at the top for now. -+ -+ move.d 0x40800000, sp -+ -+ ;; Figure out where the compressed piggyback image is -+ ;; in the flash (since we wont try to copy it to DRAM -+ ;; before unpacking). It is at _edata, but in flash. -+ ;; Use (_edata - basse) as offset to the current PC. -+ -+basse: move.d pc, r5 -+ and.d 0x7fffffff, r5 ; strip any non-cache bit -+ subq 2, r5 ; compensate for the move.d pc instr -+ move.d r5, r0 ; save for later - flash address of 'basse' -+ add.d _edata, r5 -+ sub.d basse, r5 ; r5 = flash address of '_edata' -+ -+ ;; Copy text+data to DRAM -+ -+ move.d basse, r1 ; destination -+ move.d _edata, r2 ; end destination -+1: move.w [r0+], r3 -+ move.w r3, [r1+] -+ cmp.d r2, r1 -+ bcs 1b -+ nop -+ -+ move.d r5, [_input_data] ; for the decompressor -+ -+ -+ ;; Clear the decompressors BSS (between _edata and _end) -+ -+ moveq 0, r0 -+ move.d _edata, r1 -+ move.d _end, r2 -+1: move.w r0, [r1+] -+ cmp.d r2, r1 -+ bcs 1b -+ nop -+ -+ ;; Save command line magic and address. -+ move.d _cmd_line_magic, $r12 -+ move.d $r10, [$r12] -+ move.d _cmd_line_addr, $r12 -+ move.d $r11, [$r12] -+ -+ ;; Do the decompression and save compressed size in _inptr -+ -+ jsr _decompress_kernel -+ -+ ;; Put start address of root partition in r9 so the kernel can use it -+ ;; when mounting from flash -+ -+ move.d [_input_data], r9 ; flash address of compressed kernel -+ add.d [_inptr], r9 ; size of compressed kernel -+ -+ ;; Restore command line magic and address. -+ move.d _cmd_line_magic, $r10 -+ move.d [$r10], $r10 -+ move.d _cmd_line_addr, $r11 -+ move.d [$r11], $r11 -+ -+ ;; Enter the decompressed kernel -+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized -+ jump 0x40004000 ; kernel is linked to this address -+ -+ .data -+ -+_input_data: -+ .dword 0 ; used by the decompressor -+_cmd_line_magic: -+ .dword 0 -+_cmd_line_addr: -+ .dword 0 -+#include "hw_settings_MCM.S" -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-05-28 17:14:14.000000000 +0200 -@@ -0,0 +1,62 @@ -+/* -+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ -+ * -+ * This table is used by some tools to extract hardware parameters. -+ * The table should be included in the kernel and the decompressor. -+ * Don't forget to update the tools if you change this table. -+ * -+ * Copyright (C) 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ */ -+ -+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) -+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) -+ -+ .ascii "HW_PARAM_MAGIC" ; Magic number -+ .dword 0xc0004000 ; Kernel start address -+ -+ ; Debug port -+#ifdef CONFIG_ETRAX_DEBUG_PORT0 -+ .dword 0 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT1) -+ .dword 1 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT2) -+ .dword 2 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT3) -+ .dword 3 -+#else -+ .dword 4 ; No debug -+#endif -+ -+ ; SDRAM or EDO DRAM? -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword 1 -+#else -+ .dword 0 -+#endif -+ -+ ; Register values -+ .dword R_WAITSTATES -+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES -+ .dword R_BUS_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword R_SDRAM_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG -+ .dword R_SDRAM_TIMING -+ .dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING -+#else -+ .dword R_DRAM_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG -+ .dword R_DRAM_TIMING -+ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING -+#endif -+ .dword R_PORT_PA_SET -+ .dword PA_SET_VALUE -+ .dword R_PORT_PB_SET -+ .dword PB_SET_VALUE -+ .dword 0 ; No more register values -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-05-28 20:12:02.000000000 +0200 -@@ -0,0 +1,62 @@ -+/* -+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ -+ * -+ * This table is used by some tools to extract hardware parameters. -+ * The table should be included in the kernel and the decompressor. -+ * Don't forget to update the tools if you change this table. -+ * -+ * Copyright (C) 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ */ -+ -+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) -+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) -+ -+ .ascii "HW_PARAM_MAGIC" ; Magic number -+ .dword 0xc0004000 ; Kernel start address -+ -+ ; Debug port -+#ifdef CONFIG_ETRAX_DEBUG_PORT0 -+ .dword 0 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT1) -+ .dword 1 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT2) -+ .dword 2 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT3) -+ .dword 3 -+#else -+ .dword 4 ; No debug -+#endif -+ -+ ; SDRAM or EDO DRAM? -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword 1 -+#else -+ .dword 0 -+#endif -+ -+ ; Register values -+ .dword R_WAITSTATES -+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES -+ .dword R_BUS_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword R_SDRAM_CONFIG -+ .dword 0x09603636 -+ .dword R_SDRAM_TIMING -+ .dword 0x80008002 -+#else -+ .dword R_DRAM_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG -+ .dword R_DRAM_TIMING -+ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING -+#endif -+ .dword R_PORT_PA_SET -+ .dword PA_SET_VALUE -+ .dword R_PORT_PB_SET -+ .dword PB_SET_VALUE -+ .dword 0 ; No more register values -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-05-28 20:12:29.000000000 +0200 -@@ -0,0 +1,62 @@ -+/* -+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ -+ * -+ * This table is used by some tools to extract hardware parameters. -+ * The table should be included in the kernel and the decompressor. -+ * Don't forget to update the tools if you change this table. -+ * -+ * Copyright (C) 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ */ -+ -+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) -+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) -+ -+ .ascii "HW_PARAM_MAGIC" ; Magic number -+ .dword 0xc0004000 ; Kernel start address -+ -+ ; Debug port -+#ifdef CONFIG_ETRAX_DEBUG_PORT0 -+ .dword 0 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT1) -+ .dword 1 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT2) -+ .dword 2 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT3) -+ .dword 3 -+#else -+ .dword 4 ; No debug -+#endif -+ -+ ; SDRAM or EDO DRAM? -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword 1 -+#else -+ .dword 0 -+#endif -+ -+ ; Register values -+ .dword R_WAITSTATES -+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES -+ .dword R_BUS_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword R_SDRAM_CONFIG -+ .dword 0x09603636 -+ .dword R_SDRAM_TIMING -+ .dword 0x80008002 -+#else -+ .dword R_DRAM_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG -+ .dword R_DRAM_TIMING -+ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING -+#endif -+ .dword R_PORT_PA_SET -+ .dword PA_SET_VALUE -+ .dword R_PORT_PB_SET -+ .dword PB_SET_VALUE -+ .dword 0 ; No more register values -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-05-28 20:12:55.000000000 +0200 -@@ -0,0 +1,62 @@ -+/* -+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ -+ * -+ * This table is used by some tools to extract hardware parameters. -+ * The table should be included in the kernel and the decompressor. -+ * Don't forget to update the tools if you change this table. -+ * -+ * Copyright (C) 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ */ -+ -+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) -+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) -+ -+ .ascii "HW_PARAM_MAGIC" ; Magic number -+ .dword 0xc0004000 ; Kernel start address -+ -+ ; Debug port -+#ifdef CONFIG_ETRAX_DEBUG_PORT0 -+ .dword 0 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT1) -+ .dword 1 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT2) -+ .dword 2 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT3) -+ .dword 3 -+#else -+ .dword 4 ; No debug -+#endif -+ -+ ; SDRAM or EDO DRAM? -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword 1 -+#else -+ .dword 0 -+#endif -+ -+ ; Register values -+ .dword R_WAITSTATES -+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES -+ .dword R_BUS_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword R_SDRAM_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG -+ .dword R_SDRAM_TIMING -+ .dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING -+#else -+ .dword R_DRAM_CONFIG -+ .dword 0x09603737 -+ .dword R_DRAM_TIMING -+ .dword 0x80008002 -+#endif -+ .dword R_PORT_PA_SET -+ .dword PA_SET_VALUE -+ .dword R_PORT_PB_SET -+ .dword PB_SET_VALUE -+ .dword 0 ; No more register values -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-05-28 20:11:31.000000000 +0200 -@@ -0,0 +1,62 @@ -+/* -+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ -+ * -+ * This table is used by some tools to extract hardware parameters. -+ * The table should be included in the kernel and the decompressor. -+ * Don't forget to update the tools if you change this table. -+ * -+ * Copyright (C) 2001 Axis Communications AB -+ * -+ * Authors: Mikael Starvik (starvik@axis.com) -+ */ -+ -+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) -+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ -+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) -+ -+ .ascii "HW_PARAM_MAGIC" ; Magic number -+ .dword 0xc0004000 ; Kernel start address -+ -+ ; Debug port -+#ifdef CONFIG_ETRAX_DEBUG_PORT0 -+ .dword 0 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT1) -+ .dword 1 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT2) -+ .dword 2 -+#elif defined(CONFIG_ETRAX_DEBUG_PORT3) -+ .dword 3 -+#else -+ .dword 4 ; No debug -+#endif -+ -+ ; SDRAM or EDO DRAM? -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword 1 -+#else -+ .dword 0 -+#endif -+ -+ ; Register values -+ .dword R_WAITSTATES -+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES -+ .dword R_BUS_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG -+#ifdef CONFIG_ETRAX_SDRAM -+ .dword R_SDRAM_CONFIG -+ .dword 0x09603636 -+ .dword R_SDRAM_TIMING -+ .dword 0x80608002 -+#else -+ .dword R_DRAM_CONFIG -+ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG -+ .dword R_DRAM_TIMING -+ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING -+#endif -+ .dword R_PORT_PA_SET -+ .dword PA_SET_VALUE -+ .dword R_PORT_PB_SET -+ .dword PB_SET_VALUE -+ .dword 0 ; No more register values diff --git a/target/linux/etrax/patches/cris/011-debug-port b/target/linux/etrax/patches/cris/011-debug-port deleted file mode 100644 index ecd780c608..0000000000 --- a/target/linux/etrax/patches/cris/011-debug-port +++ /dev/null @@ -1,26 +0,0 @@ -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/misc.c linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/misc.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/misc.c 2007-05-28 21:53:52.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/misc.c 2007-05-28 22:23:16.000000000 +0200 -@@ -143,9 +143,10 @@ - static void - puts(const char *s) - { --#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL -- while(*s) { --#ifdef CONFIG_ETRAX_DEBUG_PORT0 -+#if defined(CONFIG_ETRAX_DEBUG_PORT0) || defined(CONFIG_ETRAX_DEBUG_PORT1) || defined(CONFIG_ETRAX_DEBUG_PORT2) || defined(CONFIG_ETRAX_DEBUG_PORT3) || defined(CONFIG_ETRAX_SERIAL_PORT0) -+ -+while(*s) { -+#if defined(CONFIG_ETRAX_DEBUG_PORT0) || defined(CONFIG_ETRAX_SERIAL_PORT0) - while(!(*R_SERIAL0_STATUS & (1 << 5))) ; - *R_SERIAL0_TR_DATA = *s++; - #endif -@@ -232,7 +233,7 @@ - /* input_data is set in head.S */ - inbuf = input_data; - --#ifdef CONFIG_ETRAX_DEBUG_PORT0 -+#if defined(CONFIG_ETRAX_DEBUG_PORT0) || defined(CONFIG_ETRAX_SERIAL_PORT0) - *R_SERIAL0_XOFF = 0; - *R_SERIAL0_BAUD = 0x99; - *R_SERIAL0_TR_CTRL = 0x40; diff --git a/target/linux/etrax/patches/cris/012-splash.patch b/target/linux/etrax/patches/cris/012-splash.patch deleted file mode 100644 index 73c3f9fabe..0000000000 --- a/target/linux/etrax/patches/cris/012-splash.patch +++ /dev/null @@ -1,22 +0,0 @@ -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/misc.c linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/misc.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/misc.c 2007-05-28 22:35:23.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/misc.c 2007-05-28 22:40:43.000000000 +0200 -@@ -266,8 +266,16 @@ - puts("You need an ETRAX 100LX to run linux 2.6\n"); - while(1); - } -+ puts("\r\n _ _ _ \r\n"); -+ puts(" | | (_) | \r\n"); -+ puts(" __ _ ___ _ __ ___ ___ ___ _ _ ___| |_ ___ _ __ ___ ___ _| |_\r\n"); -+ puts(" / _` |/ __| '_ ` _ \\ / _ \\/ __| | | / __| __/ _ \\ '_ ` _ \\/ __| | | __|\r\n"); -+ puts(" | (_| | (__| | | | | | __/\\__ \\ |_| \\__ \\ || __/ | | | | \\__ \\_| | |_ \r\n"); -+ puts(" \\__,_|\\___|_| |_| |_|\\___||___/\\__, |___/\\__\\___|_| |_| |_|___(_)_|\\__|\r\n"); -+ puts(" __/ | \r\n"); -+ puts(" |___/ FOXBOARD @ www.acmesystems.it \r\n"); - -- puts("Uncompressing Linux...\n"); -+ puts("Uncompressing Linux...\r\n"); - gunzip(); -- puts("Done. Now booting the kernel.\n"); -+ puts("Done. Now booting the kernel.\r\n"); - } diff --git a/target/linux/etrax/patches/cris/013-crisdriver-sysfs.patch b/target/linux/etrax/patches/cris/013-crisdriver-sysfs.patch deleted file mode 100644 index 7f594c4194..0000000000 --- a/target/linux/etrax/patches/cris/013-crisdriver-sysfs.patch +++ /dev/null @@ -1,180 +0,0 @@ -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.19.2/arch/cris/arch-v10/drivers/ds1302.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/ds1302.c 2007-05-28 22:35:23.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/ds1302.c 2007-05-28 22:55:40.000000000 +0200 -@@ -21,7 +21,7 @@ - #include - #include - #include -- -+#include - #include - #include - #include -@@ -480,6 +480,10 @@ - return 0; - } - -+#ifdef CONFIG_SYSFS -+static struct class *rtc_class; -+#endif -+ - static int __init ds1302_register(void) - { - ds1302_init(); -@@ -488,7 +492,15 @@ - ds1302_name, RTC_MAJOR_NR); - return -1; - } -- return 0; -+ -+ #ifdef CONFIG_SYSFS -+ rtc_class = class_create(THIS_MODULE, "rtc"); -+ class_device_create(rtc_class, NULL, -+ MKDEV(RTC_MAJOR_NR, 0), -+ NULL, "rtc"); -+ #endif -+ -+ return 0; - - } - -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/eeprom.c linux-2.6.19.2/arch/cris/arch-v10/drivers/eeprom.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/eeprom.c 2007-05-28 22:35:23.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/eeprom.c 2007-05-28 23:03:45.000000000 +0200 -@@ -103,6 +103,7 @@ - #include - #include - #include -+#include - #include - #include "i2c.h" - -@@ -185,6 +186,9 @@ - }; - - /* eeprom init call. Probes for different eeprom models. */ -+#ifdef CONFIG_SYSFS -+static struct class *eep_class; -+#endif - - int __init eeprom_init(void) - { -@@ -202,7 +206,13 @@ - eeprom_name, EEPROM_MAJOR_NR); - return -1; - } -- -+ -+#ifdef CONFIG_SYSFS -+ eep_class = class_create(THIS_MODULE, "eep"); -+ class_device_create(eep_class, NULL, MKDEV(EEPROM_MAJOR, 0), NULL, "eeprom"); -+#endif -+ -+ - printk("EEPROM char device v0.3, (c) 2000 Axis Communications AB\n"); - - /* -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.19.2/arch/cris/arch-v10/drivers/gpio.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/gpio.c 2007-05-28 22:35:23.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/gpio.c 2007-05-28 22:59:27.000000000 +0200 -@@ -181,6 +181,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -938,6 +939,10 @@ - - /* main driver initialization routine, called from mem.c */ - -+#ifdef CONFIG_SYSFS -+static struct class *gpio_class; -+#endif -+ - static __init int - gpio_init(void) - { -@@ -955,6 +960,14 @@ - return res; - } - -+#ifdef CONFIG_SYSFS -+ gpio_class = class_create(THIS_MODULE, "gpio"); -+ class_device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 0), NULL, "gpioa"); -+ class_device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 1), NULL, "gpiob"); -+ class_device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 2), NULL, "leds"); -+ class_device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 3), NULL, "gpiog"); -+#endif -+ - /* Clear all leds */ - #if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS) - LED_NETWORK_SET(0); -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/pcf8563.c linux-2.6.19.2/arch/cris/arch-v10/drivers/pcf8563.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/pcf8563.c 2007-05-28 22:35:23.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/pcf8563.c 2007-05-28 23:09:02.000000000 +0200 -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -344,6 +345,10 @@ - return 0; - } - -+#ifdef CONFIG_SYSFS -+static struct class *pcf8563_class; -+#endif -+ - static int __init - pcf8563_register(void) - { -@@ -358,6 +363,10 @@ - "device.\n", PCF8563_NAME, PCF8563_MAJOR); - return -1; - } -+#ifdef CONFIG_SYSFS -+ pcf8563_class = class_create(THIS_MODULE, "pcf8563"); -+ class_device_create(pcf8563_class, NULL, MKDEV(PCF8563_MAJOR, 0), NULL, "rtc"); -+#endif - - printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, - DRIVER_VERSION); -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/sync_serial.c linux-2.6.19.2/arch/cris/arch-v10/drivers/sync_serial.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/sync_serial.c 2007-05-28 22:35:23.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/sync_serial.c 2007-05-28 23:06:41.000000000 +0200 -@@ -29,6 +29,8 @@ - #include - #include - #include -+#include -+ - #include - - /* The receiver is a bit tricky beacuse of the continuous stream of data.*/ -@@ -241,6 +243,9 @@ - .open = sync_serial_open, - .release = sync_serial_release - }; -+#ifdef CONFIG_SYSFS -+static struct class *syncser_class; -+#endif - - static int __init etrax_sync_serial_init(void) - { -@@ -274,6 +279,11 @@ - printk("unable to get major for synchronous serial port\n"); - return -EBUSY; - } -+#ifdef CONFIG_SYSFS -+ syncser_class = class_create(THIS_MODULE, "syncser"); -+ class_device_create(syncser_class, NULL, MKDEV(SYNC_SERIAL_MAJOR, 0), NULL, "syncser0"); -+ class_device_create(syncser_class, NULL, MKDEV(SYNC_SERIAL_MAJOR, 1), NULL, "syncser1"); -+#endif - - /* Deselect synchronous serial ports while configuring. */ - SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); diff --git a/target/linux/etrax/patches/cris/014-partition-tables.patch b/target/linux/etrax/patches/cris/014-partition-tables.patch deleted file mode 100644 index d32762a81e..0000000000 --- a/target/linux/etrax/patches/cris/014-partition-tables.patch +++ /dev/null @@ -1,102 +0,0 @@ -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-05-29 23:30:35.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-05-29 23:33:44.000000000 +0200 -@@ -60,3 +60,5 @@ - .dword R_PORT_PB_SET - .dword PB_SET_VALUE - .dword 0 ; No more register values -+ .ascii "ACME_PART_MAGIC" ; Magic number -+ .dword 0xdeadc0de -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-05-29 23:30:35.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-05-29 23:33:44.000000000 +0200 -@@ -60,3 +60,5 @@ - .dword R_PORT_PB_SET - .dword PB_SET_VALUE - .dword 0 ; No more register values -+ .ascii "ACME_PART_MAGIC" ; Magic number -+ .dword 0xdeadc0de -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-05-29 23:30:35.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-05-29 23:33:44.000000000 +0200 -@@ -60,3 +60,5 @@ - .dword R_PORT_PB_SET - .dword PB_SET_VALUE - .dword 0 ; No more register values -+ .ascii "ACME_PART_MAGIC" ; Magic number -+ .dword 0xdeadc0de -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-05-29 23:30:35.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-05-29 23:33:44.000000000 +0200 -@@ -60,3 +60,5 @@ - .dword R_PORT_PB_SET - .dword PB_SET_VALUE - .dword 0 ; No more register values -+ .ascii "ACME_PART_MAGIC" ; Magic number -+ .dword 0xdeadc0de -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S ---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-05-29 23:30:35.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-05-29 23:33:44.000000000 +0200 -@@ -60,3 +60,5 @@ - .dword R_PORT_PB_SET - .dword PB_SET_VALUE - .dword 0 ; No more register values -+ .ascii "ACME_PART_MAGIC" ; Magic number -+ .dword 0xdeadc0de -diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-29 23:30:36.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-29 23:36:31.000000000 +0200 -@@ -421,6 +421,11 @@ - struct partitiontable_entry *ptable; - int use_default_ptable = 1; /* Until proven otherwise. */ - const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n"; -+ unsigned int kernel_part_size = 0; -+ unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR); -+ unsigned int flash_scan_count = 0; -+ const char *part_magic = "ACME_PART_MAGIC"; -+ unsigned int magic_len = strlen(part_magic); - - if (!(mymtd = flash_probe())) { - /* There's no reason to use this module if no flash chip can -@@ -432,6 +437,32 @@ - mymtd->name, mymtd->size); - axisflash_mtd = mymtd; - } -+ /* scan flash to findout where out partition starts */ -+ -+ printk(KERN_INFO "Scanning flash for end of kernel magic\n"); -+ for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++){ -+ if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0){ -+ //printk(KERN_INFO "Found end of kernel magic at 0x%.08X\n", flash_scan_count); -+ kernel_part_size = flash_mem[flash_scan_count + magic_len ]; -+ kernel_part_size <<= 8; -+ kernel_part_size += flash_mem[flash_scan_count + magic_len + 2]; -+ kernel_part_size <<= 8; -+ kernel_part_size += flash_mem[flash_scan_count + magic_len + 1]; -+ kernel_part_size <<= 8; -+ kernel_part_size += flash_mem[flash_scan_count + magic_len + 3]; -+ printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size); -+ flash_scan_count = 1100000; -+ } -+ } -+ -+ -+ if(kernel_part_size){ -+ kernel_part_size = (kernel_part_size & 0xffff0000); -+ //printk(KERN_INFO "Configuring partition sizes total flash 0x%.08X - kernel 0x%.08X - rootfs 0x%.08X\n", mymtd->size, kernel_part_size, mymtd->size - kernel_part_size); -+ axis_default_partitions[0].size = kernel_part_size; -+ axis_default_partitions[1].size = mymtd->size - axis_default_partitions[0].size; -+ axis_default_partitions[1].offset = axis_default_partitions[0].size; -+ } - - if (mymtd) { - mymtd->owner = THIS_MODULE; -@@ -527,7 +558,7 @@ - - if (mymtd) { - if (use_default_ptable) { -- printk(KERN_INFO " Using default partition table.\n"); -+ printk(KERN_INFO " Using ACME partition table.\n"); - err = add_mtd_partitions(mymtd, axis_default_partitions, - NUM_DEFAULT_PARTITIONS); - } else { diff --git a/target/linux/etrax/patches/cris/015-samsung-flash-chip.patch b/target/linux/etrax/patches/cris/015-samsung-flash-chip.patch deleted file mode 100644 index 0c87fb995c..0000000000 --- a/target/linux/etrax/patches/cris/015-samsung-flash-chip.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff -urN linux-2.6.19.2.orig/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c ---- linux-2.6.19.2.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-05-30 21:23:01.000000000 +0200 -+++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c 2007-05-30 21:38:13.000000000 +0200 -@@ -291,8 +291,7 @@ - kfree(mtd); - return NULL; - } -- -- if (extp->MajorVersion != '1' || -+ if (extp->MajorVersion < '0' || extp->MajorVersion > '3' || - (extp->MinorVersion < '0' || extp->MinorVersion > '4')) { - if (cfi->mfr == MANUFACTURER_SAMSUNG && - (extp->MajorVersion == '3' && extp->MinorVersion == '3')) { diff --git a/target/linux/etrax/patches/cris/016-auto-detect-ram.patch b/target/linux/etrax/patches/cris/016-auto-detect-ram.patch deleted file mode 100644 index 51930f2ce2..0000000000 --- a/target/linux/etrax/patches/cris/016-auto-detect-ram.patch +++ /dev/null @@ -1,101 +0,0 @@ -diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S ---- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-06-01 00:37:57.000000000 +0200 -+++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-06-01 00:34:55.000000000 +0200 -@@ -62,3 +62,5 @@ - .dword 0 ; No more register values - .ascii "ACME_PART_MAGIC" ; Magic number - .dword 0xdeadc0de -+ .ascii "ACME_RAM_MAGIC" ; Magic number -+ .dword 0x2000000 -diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_416.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S ---- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-06-01 00:37:57.000000000 +0200 -+++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-06-01 00:34:55.000000000 +0200 -@@ -62,3 +62,5 @@ - .dword 0 ; No more register values - .ascii "ACME_PART_MAGIC" ; Magic number - .dword 0xdeadc0de -+ .ascii "ACME_RAM_MAGIC" ; Magic number -+ .dword 0x1000000 -diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_816.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S ---- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-06-01 00:37:57.000000000 +0200 -+++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-06-01 00:34:55.000000000 +0200 -@@ -62,3 +62,5 @@ - .dword 0 ; No more register values - .ascii "ACME_PART_MAGIC" ; Magic number - .dword 0xdeadc0de -+ .ascii "ACME_RAM_MAGIC" ; Magic number -+ .dword 0x1000000 -diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_832.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S ---- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-06-01 00:37:57.000000000 +0200 -+++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-06-01 00:34:55.000000000 +0200 -@@ -62,3 +62,5 @@ - .dword 0 ; No more register values - .ascii "ACME_PART_MAGIC" ; Magic number - .dword 0xdeadc0de -+ .ascii "ACME_RAM_MAGIC" ; Magic number -+ .dword 0x2000000 -diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S ---- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-06-01 00:37:57.000000000 +0200 -+++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-06-01 00:34:55.000000000 +0200 -@@ -62,3 +62,5 @@ - .dword 0 ; No more register values - .ascii "ACME_PART_MAGIC" ; Magic number - .dword 0xdeadc0de -+ .ascii "ACME_RAM_MAGIC" ; Magic number -+ .dword 0x1000000 ---- linux-2.6.19.2//arch/cris/kernel/setup.c 2007-06-01 00:37:55.000000000 +0200 -+++ /tmp/linux-2.6.19.2/arch/cris/kernel/setup.c 2007-06-01 00:34:55.000000000 +0200 -@@ -55,6 +55,13 @@ - * boot code and the system. - * - */ -+#ifdef CONFIG_CRIS_LOW_MAP -+#define FLASH_UNCACHED_ADDR KSEG_8 -+#define FLASH_CACHED_ADDR KSEG_5 -+#else -+#define FLASH_UNCACHED_ADDR KSEG_E -+#define FLASH_CACHED_ADDR KSEG_F -+#endif - - void __init - setup_arch(char **cmdline_p) -@@ -63,15 +70,37 @@ - unsigned long bootmap_size; - unsigned long start_pfn, max_pfn; - unsigned long memory_start; -- -+ unsigned int ram_size = 0; -+ unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR); -+ unsigned int ram_scan_count = 0; -+ const char *ram_magic = "ACME_RAM_MAGIC"; -+ unsigned int magic_len = strlen(ram_magic); -+ unsigned long dend; - /* register an initial console printing routine for printk's */ - - init_etrax_debug(); - - /* we should really poll for DRAM size! */ -+ printk(KERN_INFO "Determinig RAM size\n"); -+ for(ram_scan_count = 0; ram_scan_count < 100000; ram_scan_count++){ -+ if(strncmp(&flash_mem[ram_scan_count], ram_magic, magic_len - 1) == 0){ -+ ram_size = flash_mem[ram_scan_count + magic_len ]; -+ ram_size <<= 8; -+ ram_size += flash_mem[ram_scan_count + magic_len + 2]; -+ ram_size <<= 8; -+ ram_size += flash_mem[ram_scan_count + magic_len + 1]; -+ ram_size <<= 8; -+ ram_size += flash_mem[ram_scan_count + magic_len + 3]; -+ printk(KERN_INFO "RAM size is %uMB\n", 16 * ram_size); -+ ram_scan_count = 1100000; -+ } -+ } - - high_memory = &dram_end; -- -+ dend = dram_start + 16 * 1024 * 1024 * ram_size; -+ if(ram_size == 1){ -+ high_memory = 0xc1000000; -+ } - if(romfs_in_flash || !romfs_length) { - /* if we have the romfs in flash, or if there is no rom filesystem, - * our free area starts directly after the BSS diff --git a/target/linux/etrax/patches/cris/017-uclibc-swab.patch b/target/linux/etrax/patches/cris/017-uclibc-swab.patch deleted file mode 100644 index e9f14e44e4..0000000000 --- a/target/linux/etrax/patches/cris/017-uclibc-swab.patch +++ /dev/null @@ -1,50 +0,0 @@ -Binary files linux-2.6.19.2.orig/include/linux/byteorder/.swab.h.swp and linux-2.6.19.2/include/linux/byteorder/.swab.h.swp differ -diff -urN linux-2.6.19.2.orig/include/linux/byteorder/swab.h linux-2.6.19.2/include/linux/byteorder/swab.h ---- linux-2.6.19.2.orig/include/linux/byteorder/swab.h 2007-06-02 03:13:27.000000000 +0200 -+++ linux-2.6.19.2/include/linux/byteorder/swab.h 2007-06-02 03:14:52.000000000 +0200 -@@ -20,6 +20,8 @@ - /* casts are necessary for constants, because we never know how for sure - * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way. - */ -+ -+#ifndef _BITS_BYTESWAP_H - #define ___swab16(x) \ - ({ \ - __u16 __x = (x); \ -@@ -37,6 +39,8 @@ - (((__u32)(__x) & (__u32)0x00ff0000UL) >> 8) | \ - (((__u32)(__x) & (__u32)0xff000000UL) >> 24) )); \ - }) -+#endif -+ - - #define ___swab64(x) \ - ({ \ -@@ -129,11 +133,13 @@ - # define __swab64(x) __fswab64(x) - #endif /* OPTIMIZE */ - -- -+#ifndef _BITS_BYTESWAP_H - static __inline__ __attribute_const__ __u16 __fswab16(__u16 x) - { - return __arch__swab16(x); - } -+#endif -+ - static __inline__ __u16 __swab16p(const __u16 *x) - { - return __arch__swab16p(x); -@@ -143,10 +149,12 @@ - __arch__swab16s(addr); - } - -+#ifndef _BITS_BYTESWAP_H - static __inline__ __attribute_const__ __u32 __fswab32(__u32 x) - { - return __arch__swab32(x); - } -+#endif - static __inline__ __u32 __swab32p(const __u32 *x) - { - return __arch__swab32p(x); diff --git a/target/linux/etrax/patches/cris/018-reboot.patch b/target/linux/etrax/patches/cris/018-reboot.patch deleted file mode 100644 index b9d138373f..0000000000 --- a/target/linux/etrax/patches/cris/018-reboot.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- linux-2.6.19.2.orig/kernel/sys.c 2007-06-04 22:00:44.000000000 +0200 -+++ linux-2.6.19.2/kernel/sys.c 2007-06-04 22:02:06.000000000 +0200 -@@ -829,6 +829,7 @@ - break; - - case LINUX_REBOOT_CMD_CAD_ON: -+ kernel_restart(NULL); - C_A_D = 1; - break; - diff --git a/target/linux/etrax/patches/cris/020-syscalls.patch b/target/linux/etrax/patches/cris/020-syscalls.patch deleted file mode 100644 index 5e674a6232..0000000000 --- a/target/linux/etrax/patches/cris/020-syscalls.patch +++ /dev/null @@ -1,166 +0,0 @@ -diff -urN linux-2.6.19.2.orig/include/asm-cris/unistd.h linux-2.6.19.2/include/asm/unistd.h ---- linux-2.6.19.2.orig/include/asm-cris/unistd.h 2007-06-16 23:59:11.000000000 +0200 -+++ linux-2.6.19.2/include/asm/unistd.h 2007-06-17 03:43:10.000000000 +0200 -@@ -325,9 +325,52 @@ - #define __NR_getcpu 318 - #define __NR_epoll_pwait 319 - -+#ifdef CONFIG_ETRAX_GPIO -+ #ifdef CONFIG_FOXBONE -+ #define __NR_gpiosetbits 320 -+ #define __NR_gpioclearbits 321 -+ #define __NR_gpiosetdir 322 -+ #define __NR_gpiotogglebit 323 -+ #define __NR_gpiogetbits 324 -+ #define __NR_foxboneread 325 -+ #define __NR_foxbonewrite 326 -+ #define __NR_foxbonebulkread 327 -+ #define __NR_foxbonebulkwrite 328 -+ #define __NR_foxbonereset 329 -+ #define __NR_foxboneintreg 330 -+ #define __NR_foxboneintcheck 331 -+ #define __NR_foxboneintwait 332 -+ #define NR_syscalls 333 -+ -+ #else -+ #define __NR_gpiosetbits 320 -+ #define __NR_gpioclearbits 321 -+ #define __NR_gpiosetdir 322 -+ #define __NR_gpiotogglebit 323 -+ #define __NR_gpiogetbits 324 -+ -+ #define NR_syscalls 325 -+ #endif -+#else -+ #ifdef CONFIG_FOXBONE -+ #define __NR_foxboneread 320 -+ #define __NR_foxbonewrite 321 -+ #define __NR_foxbonebulkread 322 -+ #define __NR_foxbonebulkwrite 323 -+ #define __NR_foxboneintreg 324 -+ #define __NR_foxboneintcheck 325 -+ #define __NR_foxboneintwait 326 -+ -+ #define NR_syscalls 327 -+ -+ #else -+ -+ #define NR_syscalls 320 -+ #endif -+#endif -+ - #ifdef __KERNEL__ - --#define NR_syscalls 320 - - #include - ---- linux-2.6.19.2.orig/include/linux/gpio_syscalls.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2/include/linux/gpio_syscalls.h 2007-06-17 03:44:49.000000000 +0200 -@@ -0,0 +1,75 @@ -+#ifndef __LINUX_SYSCALL_GPIO -+#define __LINUX_SYSCALL_GPIO -+#include -+#include -+#include -+#include -+ -+// port defines -+#define PORTA 'A' -+#define PORTB 'B' -+#define PORTG 'G' -+ -+//direction defines -+#define DIRIN 'I' -+#define DIROUT 'O' -+ -+// pin defines for PORTG -+#define PG0 (1<<0) -+#define PG1 (1<<1) -+#define PG2 (1<<2) -+#define PG3 (1<<3) -+#define PG4 (1<<4) -+#define PG5 (1<<5) -+#define PG6 (1<<6) -+#define PG7 (1<<7) -+#define PG8 (1<<8) -+#define PG9 (1<<9) -+#define PG10 (1<<10) -+#define PG11 (1<<11) -+#define PG12 (1<<12) -+#define PG13 (1<<13) -+#define PG14 (1<<14) -+#define PG15 (1<<15) -+#define PG16 (1<<16) -+#define PG17 (1<<17) -+#define PG18 (1<<18) -+#define PG19 (1<<19) -+#define PG20 (1<<20) -+#define PG21 (1<<21) -+#define PG22 (1<<22) -+#define PG23 (1<<23) -+#define PG24 (1<<24) -+ -+#define PG8_15 0x00ff00 -+#define PG16_23 0xff0000 -+ -+ -+// pin defines for PORTA -+#define PA0 (1<<0) -+#define PA1 (1<<1) -+#define PA2 (1<<2) -+#define PA3 (1<<3) -+#define PA4 (1<<4) -+#define PA5 (1<<5) -+#define PA6 (1<<6) -+#define PA7 (1<<7) -+ -+// pin defines for PORTB -+#define PB0 (1<<0) -+#define PB1 (1<<1) -+#define PB2 (1<<2) -+#define PB3 (1<<3) -+#define PB4 (1<<4) -+#define PB5 (1<<5) -+#define PB6 (1<<6) -+#define PB7 (1<<7) -+ -+int errno; -+_syscall2(void, gpiosetbits, unsigned char, port, unsigned int, bits); -+_syscall2(void, gpioclearbits, unsigned char, port, unsigned int, bits); -+_syscall3(void, gpiosetdir, unsigned char, port, unsigned char, dir, unsigned int, bits); -+_syscall2(void, gpiotogglebit, unsigned char, port, unsigned int, bits); -+_syscall2(unsigned int, gpiogetbits, unsigned char, port, unsigned int, bits); -+ -+#endif ---- linux-2.6.19.2.orig/arch/cris/arch-v10/kernel/entry.S 2007-06-16 23:58:14.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/kernel/entry.S 2007-06-17 03:48:21.000000000 +0200 -@@ -1200,6 +1200,23 @@ - .long sys_move_pages - .long sys_getcpu - .long sys_epoll_pwait -+#ifdef CONFIG_ETRAX_GPIO -+ .long sys_gpiosetbits -+ .long sys_gpioclearbits -+ .long sys_gpiosetdir -+ .long sys_gpiotogglebit -+ .long sys_gpiogetbits -+#endif -+#ifdef CONFIG_FOXBONE -+ .long sys_foxboneread -+ .long sys_foxbonewrite -+ .long sys_foxbonebulkread -+ .long sys_foxbonebulkwrite -+ .long sys_foxbonereset -+ .long sys_foxboneintreg -+ .long sys_foxboneintcheck -+ .long sys_foxboneintwait -+#endif - - /* - * NOTE!! This doesn't have to be exact - we just have -diff linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/Makefile linux-2.6.19.2/arch/cris/arch-v10/drivers/Makefile ---- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/Makefile 2007-06-16 23:58:14.000000000 +0200 -+++ linux-2.6.19.2/arch/cris/arch-v10/drivers/Makefile 2007-06-17 03:48:21.000000000 +0200 -8a9 -> obj-$(CONFIG_ETRAX_GPIO) += gpio_syscalls.o diff --git a/target/linux/etrax/patches/generic_2.6/001-squashfs.patch b/target/linux/etrax/patches/generic_2.6/001-squashfs.patch deleted file mode 100644 index 6881cd0bb1..0000000000 --- a/target/linux/etrax/patches/generic_2.6/001-squashfs.patch +++ /dev/null @@ -1,4170 +0,0 @@ -diff -urN linux-2.6.19.old/fs/Kconfig linux-2.6.19.dev/fs/Kconfig ---- linux-2.6.19.old/fs/Kconfig 2006-12-14 03:13:16.000000000 +0100 -+++ linux-2.6.19.dev/fs/Kconfig 2006-12-14 03:13:16.000000000 +0100 -@@ -1457,6 +1457,71 @@ - - If unsure, say N. - -+config SQUASHFS -+ tristate "SquashFS 3.0 - Squashed file system support" -+ select ZLIB_INFLATE -+ help -+ Saying Y here includes support for SquashFS 3.0 (a Compressed Read-Only File -+ System). Squashfs is a highly compressed read-only filesystem for Linux. -+ It uses zlib compression to compress both files, inodes and directories. -+ Inodes in the system are very small and all blocks are packed to minimise -+ data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. -+ SquashFS 3.0 supports 64 bit filesystems and files (larger than 4GB), full -+ uid/gid information, hard links and timestamps. -+ -+ Squashfs is intended for general read-only filesystem use, for archival -+ use (i.e. in cases where a .tar.gz file may be used), and in embedded -+ systems where low overhead is needed. Further information and filesystem tools -+ are available from http://squashfs.sourceforge.net. -+ -+ If you want to compile this as a module ( = code which can be -+ inserted in and removed from the running kernel whenever you want), -+ say M here and read . The module -+ will be called squashfs. Note that the root file system (the one -+ containing the directory /) cannot be compiled as a module. -+ -+ If unsure, say N. -+ -+config SQUASHFS_EMBEDDED -+ -+ bool "Additional options for memory-constrained systems" -+ depends on SQUASHFS -+ default n -+ help -+ Saying Y here allows you to specify cache sizes and how Squashfs -+ allocates memory. This is only intended for memory constrained -+ systems. -+ -+ If unsure, say N. -+ -+config SQUASHFS_FRAGMENT_CACHE_SIZE -+ int "Number of fragments cached" if SQUASHFS_EMBEDDED -+ depends on SQUASHFS -+ default "3" -+ help -+ By default SquashFS caches the last 3 fragments read from -+ the filesystem. Increasing this amount may mean SquashFS -+ has to re-read fragments less often from disk, at the expense -+ of extra system memory. Decreasing this amount will mean -+ SquashFS uses less memory at the expense of extra reads from disk. -+ -+ Note there must be at least one cached fragment. Anything -+ much more than three will probably not make much difference. -+ -+config SQUASHFS_VMALLOC -+ bool "Use Vmalloc rather than Kmalloc" if SQUASHFS_EMBEDDED -+ depends on SQUASHFS -+ default n -+ help -+ By default SquashFS uses kmalloc to obtain fragment cache memory. -+ Kmalloc memory is the standard kernel allocator, but it can fail -+ on memory constrained systems. Because of the way Vmalloc works, -+ Vmalloc can succeed when kmalloc fails. Specifying this option -+ will make SquashFS always use Vmalloc to allocate the -+ fragment cache memory. -+ -+ If unsure, say N. -+ - config VXFS_FS - tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" - depends on BLOCK -diff -urN linux-2.6.19.old/fs/Makefile linux-2.6.19.dev/fs/Makefile ---- linux-2.6.19.old/fs/Makefile 2006-12-14 03:13:16.000000000 +0100 -+++ linux-2.6.19.dev/fs/Makefile 2006-12-14 03:13:16.000000000 +0100 -@@ -67,6 +67,7 @@ - obj-$(CONFIG_JBD2) += jbd2/ - obj-$(CONFIG_EXT2_FS) += ext2/ - obj-$(CONFIG_CRAMFS) += cramfs/ -+obj-$(CONFIG_SQUASHFS) += squashfs/ - obj-$(CONFIG_RAMFS) += ramfs/ - obj-$(CONFIG_HUGETLBFS) += hugetlbfs/ - obj-$(CONFIG_CODA_FS) += coda/ -diff -urN linux-2.6.19.old/fs/squashfs/inode.c linux-2.6.19.dev/fs/squashfs/inode.c ---- linux-2.6.19.old/fs/squashfs/inode.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/squashfs/inode.c 2006-12-14 03:13:16.000000000 +0100 -@@ -0,0 +1,2124 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * inode.c -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "squashfs.h" -+ -+static void squashfs_put_super(struct super_block *); -+static int squashfs_statfs(struct dentry *, struct kstatfs *); -+static int squashfs_symlink_readpage(struct file *file, struct page *page); -+static int squashfs_readpage(struct file *file, struct page *page); -+static int squashfs_readpage4K(struct file *file, struct page *page); -+static int squashfs_readdir(struct file *, void *, filldir_t); -+static struct inode *squashfs_alloc_inode(struct super_block *sb); -+static void squashfs_destroy_inode(struct inode *inode); -+static int init_inodecache(void); -+static void destroy_inodecache(void); -+static struct dentry *squashfs_lookup(struct inode *, struct dentry *, -+ struct nameidata *); -+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode); -+static long long read_blocklist(struct inode *inode, int index, -+ int readahead_blks, char *block_list, -+ unsigned short **block_p, unsigned int *bsize); -+static int squashfs_get_sb(struct file_system_type *, int, -+ const char *, void *, struct vfsmount *); -+ -+ -+static z_stream stream; -+ -+static struct file_system_type squashfs_fs_type = { -+ .owner = THIS_MODULE, -+ .name = "squashfs", -+ .get_sb = squashfs_get_sb, -+ .kill_sb = kill_block_super, -+ .fs_flags = FS_REQUIRES_DEV -+}; -+ -+static unsigned char squashfs_filetype_table[] = { -+ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK -+}; -+ -+static struct super_operations squashfs_ops = { -+ .alloc_inode = squashfs_alloc_inode, -+ .destroy_inode = squashfs_destroy_inode, -+ .statfs = squashfs_statfs, -+ .put_super = squashfs_put_super, -+}; -+ -+SQSH_EXTERN struct address_space_operations squashfs_symlink_aops = { -+ .readpage = squashfs_symlink_readpage -+}; -+ -+SQSH_EXTERN struct address_space_operations squashfs_aops = { -+ .readpage = squashfs_readpage -+}; -+ -+SQSH_EXTERN struct address_space_operations squashfs_aops_4K = { -+ .readpage = squashfs_readpage4K -+}; -+ -+static struct file_operations squashfs_dir_ops = { -+ .read = generic_read_dir, -+ .readdir = squashfs_readdir -+}; -+ -+SQSH_EXTERN struct inode_operations squashfs_dir_inode_ops = { -+ .lookup = squashfs_lookup -+}; -+ -+ -+static struct buffer_head *get_block_length(struct super_block *s, -+ int *cur_index, int *offset, int *c_byte) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ unsigned short temp; -+ struct buffer_head *bh; -+ -+ if (!(bh = sb_bread(s, *cur_index))) -+ goto out; -+ -+ if (msblk->devblksize - *offset == 1) { -+ if (msblk->swap) -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ else -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ brelse(bh); -+ if (!(bh = sb_bread(s, ++(*cur_index)))) -+ goto out; -+ if (msblk->swap) -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ bh->b_data); -+ else -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ bh->b_data); -+ *c_byte = temp; -+ *offset = 1; -+ } else { -+ if (msblk->swap) { -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset + 1)); -+ } else { -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset + 1)); -+ } -+ *c_byte = temp; -+ *offset += 2; -+ } -+ -+ if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) { -+ if (*offset == msblk->devblksize) { -+ brelse(bh); -+ if (!(bh = sb_bread(s, ++(*cur_index)))) -+ goto out; -+ *offset = 0; -+ } -+ if (*((unsigned char *) (bh->b_data + *offset)) != -+ SQUASHFS_MARKER_BYTE) { -+ ERROR("Metadata block marker corrupt @ %x\n", -+ *cur_index); -+ brelse(bh); -+ goto out; -+ } -+ (*offset)++; -+ } -+ return bh; -+ -+out: -+ return NULL; -+} -+ -+ -+SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer, -+ long long index, unsigned int length, -+ long long *next_index) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct buffer_head *bh[((SQUASHFS_FILE_MAX_SIZE - 1) >> -+ msblk->devblksize_log2) + 2]; -+ unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1); -+ unsigned int cur_index = index >> msblk->devblksize_log2; -+ int bytes, avail_bytes, b = 0, k; -+ char *c_buffer; -+ unsigned int compressed; -+ unsigned int c_byte = length; -+ -+ if (c_byte) { -+ bytes = msblk->devblksize - offset; -+ compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte); -+ c_buffer = compressed ? msblk->read_data : buffer; -+ c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte); -+ -+ TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed -+ ? "" : "un", (unsigned int) c_byte); -+ -+ if (!(bh[0] = sb_getblk(s, cur_index))) -+ goto block_release; -+ -+ for (b = 1; bytes < c_byte; b++) { -+ if (!(bh[b] = sb_getblk(s, ++cur_index))) -+ goto block_release; -+ bytes += msblk->devblksize; -+ } -+ ll_rw_block(READ, b, bh); -+ } else { -+ if (!(bh[0] = get_block_length(s, &cur_index, &offset, -+ &c_byte))) -+ goto read_failure; -+ -+ bytes = msblk->devblksize - offset; -+ compressed = SQUASHFS_COMPRESSED(c_byte); -+ c_buffer = compressed ? msblk->read_data : buffer; -+ c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte); -+ -+ TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed -+ ? "" : "un", (unsigned int) c_byte); -+ -+ for (b = 1; bytes < c_byte; b++) { -+ if (!(bh[b] = sb_getblk(s, ++cur_index))) -+ goto block_release; -+ bytes += msblk->devblksize; -+ } -+ ll_rw_block(READ, b - 1, bh + 1); -+ } -+ -+ if (compressed) -+ down(&msblk->read_data_mutex); -+ -+ for (bytes = 0, k = 0; k < b; k++) { -+ avail_bytes = (c_byte - bytes) > (msblk->devblksize - offset) ? -+ msblk->devblksize - offset : -+ c_byte - bytes; -+ wait_on_buffer(bh[k]); -+ if (!buffer_uptodate(bh[k])) -+ goto block_release; -+ memcpy(c_buffer + bytes, bh[k]->b_data + offset, avail_bytes); -+ bytes += avail_bytes; -+ offset = 0; -+ brelse(bh[k]); -+ } -+ -+ /* -+ * uncompress block -+ */ -+ if (compressed) { -+ int zlib_err; -+ -+ stream.next_in = c_buffer; -+ stream.avail_in = c_byte; -+ stream.next_out = buffer; -+ stream.avail_out = msblk->read_size; -+ -+ if (((zlib_err = zlib_inflateInit(&stream)) != Z_OK) || -+ ((zlib_err = zlib_inflate(&stream, Z_FINISH)) -+ != Z_STREAM_END) || ((zlib_err = -+ zlib_inflateEnd(&stream)) != Z_OK)) { -+ ERROR("zlib_fs returned unexpected result 0x%x\n", -+ zlib_err); -+ bytes = 0; -+ } else -+ bytes = stream.total_out; -+ -+ up(&msblk->read_data_mutex); -+ } -+ -+ if (next_index) -+ *next_index = index + c_byte + (length ? 0 : -+ (SQUASHFS_CHECK_DATA(msblk->sblk.flags) -+ ? 3 : 2)); -+ return bytes; -+ -+block_release: -+ while (--b >= 0) -+ brelse(bh[b]); -+ -+read_failure: -+ ERROR("sb_bread failed reading block 0x%x\n", cur_index); -+ return 0; -+} -+ -+ -+SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, char *buffer, -+ long long block, unsigned int offset, -+ int length, long long *next_block, -+ unsigned int *next_offset) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ int n, i, bytes, return_length = length; -+ long long next_index; -+ -+ TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset); -+ -+ while ( 1 ) { -+ for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) -+ if (msblk->block_cache[i].block == block) -+ break; -+ -+ down(&msblk->block_cache_mutex); -+ -+ if (i == SQUASHFS_CACHED_BLKS) { -+ /* read inode header block */ -+ for (i = msblk->next_cache, n = SQUASHFS_CACHED_BLKS; -+ n ; n --, i = (i + 1) % -+ SQUASHFS_CACHED_BLKS) -+ if (msblk->block_cache[i].block != -+ SQUASHFS_USED_BLK) -+ break; -+ -+ if (n == 0) { -+ wait_queue_t wait; -+ -+ init_waitqueue_entry(&wait, current); -+ add_wait_queue(&msblk->waitq, &wait); -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ up(&msblk->block_cache_mutex); -+ schedule(); -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&msblk->waitq, &wait); -+ continue; -+ } -+ msblk->next_cache = (i + 1) % SQUASHFS_CACHED_BLKS; -+ -+ if (msblk->block_cache[i].block == -+ SQUASHFS_INVALID_BLK) { -+ if (!(msblk->block_cache[i].data = -+ kmalloc(SQUASHFS_METADATA_SIZE, -+ GFP_KERNEL))) { -+ ERROR("Failed to allocate cache" -+ "block\n"); -+ up(&msblk->block_cache_mutex); -+ goto out; -+ } -+ } -+ -+ msblk->block_cache[i].block = SQUASHFS_USED_BLK; -+ up(&msblk->block_cache_mutex); -+ -+ if (!(msblk->block_cache[i].length = -+ squashfs_read_data(s, -+ msblk->block_cache[i].data, -+ block, 0, &next_index))) { -+ ERROR("Unable to read cache block [%llx:%x]\n", -+ block, offset); -+ goto out; -+ } -+ -+ down(&msblk->block_cache_mutex); -+ wake_up(&msblk->waitq); -+ msblk->block_cache[i].block = block; -+ msblk->block_cache[i].next_index = next_index; -+ TRACE("Read cache block [%llx:%x]\n", block, offset); -+ } -+ -+ if (msblk->block_cache[i].block != block) { -+ up(&msblk->block_cache_mutex); -+ continue; -+ } -+ -+ if ((bytes = msblk->block_cache[i].length - offset) >= length) { -+ if (buffer) -+ memcpy(buffer, msblk->block_cache[i].data + -+ offset, length); -+ if (msblk->block_cache[i].length - offset == length) { -+ *next_block = msblk->block_cache[i].next_index; -+ *next_offset = 0; -+ } else { -+ *next_block = block; -+ *next_offset = offset + length; -+ } -+ up(&msblk->block_cache_mutex); -+ goto finish; -+ } else { -+ if (buffer) { -+ memcpy(buffer, msblk->block_cache[i].data + -+ offset, bytes); -+ buffer += bytes; -+ } -+ block = msblk->block_cache[i].next_index; -+ up(&msblk->block_cache_mutex); -+ length -= bytes; -+ offset = 0; -+ } -+ } -+ -+finish: -+ return return_length; -+out: -+ return 0; -+} -+ -+ -+static int get_fragment_location(struct super_block *s, unsigned int fragment, -+ long long *fragment_start_block, -+ unsigned int *fragment_size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start_block = -+ msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)]; -+ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment); -+ struct squashfs_fragment_entry fragment_entry; -+ -+ if (msblk->swap) { -+ struct squashfs_fragment_entry sfragment_entry; -+ -+ if (!squashfs_get_cached_block(s, (char *) &sfragment_entry, -+ start_block, offset, -+ sizeof(sfragment_entry), &start_block, -+ &offset)) -+ goto out; -+ SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) &fragment_entry, -+ start_block, offset, -+ sizeof(fragment_entry), &start_block, -+ &offset)) -+ goto out; -+ -+ *fragment_start_block = fragment_entry.start_block; -+ *fragment_size = fragment_entry.size; -+ -+ return 1; -+ -+out: -+ return 0; -+} -+ -+ -+SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk, struct -+ squashfs_fragment_cache *fragment) -+{ -+ down(&msblk->fragment_mutex); -+ fragment->locked --; -+ wake_up(&msblk->fragment_wait_queue); -+ up(&msblk->fragment_mutex); -+} -+ -+ -+SQSH_EXTERN struct squashfs_fragment_cache *get_cached_fragment(struct super_block -+ *s, long long start_block, -+ int length) -+{ -+ int i, n; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ -+ while ( 1 ) { -+ down(&msblk->fragment_mutex); -+ -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS && -+ msblk->fragment[i].block != start_block; i++); -+ -+ if (i == SQUASHFS_CACHED_FRAGMENTS) { -+ for (i = msblk->next_fragment, n = -+ SQUASHFS_CACHED_FRAGMENTS; n && -+ msblk->fragment[i].locked; n--, i = (i + 1) % -+ SQUASHFS_CACHED_FRAGMENTS); -+ -+ if (n == 0) { -+ wait_queue_t wait; -+ -+ init_waitqueue_entry(&wait, current); -+ add_wait_queue(&msblk->fragment_wait_queue, -+ &wait); -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ up(&msblk->fragment_mutex); -+ schedule(); -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&msblk->fragment_wait_queue, -+ &wait); -+ continue; -+ } -+ msblk->next_fragment = (msblk->next_fragment + 1) % -+ SQUASHFS_CACHED_FRAGMENTS; -+ -+ if (msblk->fragment[i].data == NULL) -+ if (!(msblk->fragment[i].data = SQUASHFS_ALLOC -+ (SQUASHFS_FILE_MAX_SIZE))) { -+ ERROR("Failed to allocate fragment " -+ "cache block\n"); -+ up(&msblk->fragment_mutex); -+ goto out; -+ } -+ -+ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; -+ msblk->fragment[i].locked = 1; -+ up(&msblk->fragment_mutex); -+ -+ if (!(msblk->fragment[i].length = squashfs_read_data(s, -+ msblk->fragment[i].data, -+ start_block, length, NULL))) { -+ ERROR("Unable to read fragment cache block " -+ "[%llx]\n", start_block); -+ msblk->fragment[i].locked = 0; -+ goto out; -+ } -+ -+ msblk->fragment[i].block = start_block; -+ TRACE("New fragment %d, start block %lld, locked %d\n", -+ i, msblk->fragment[i].block, -+ msblk->fragment[i].locked); -+ break; -+ } -+ -+ msblk->fragment[i].locked++; -+ up(&msblk->fragment_mutex); -+ TRACE("Got fragment %d, start block %lld, locked %d\n", i, -+ msblk->fragment[i].block, -+ msblk->fragment[i].locked); -+ break; -+ } -+ -+ return &msblk->fragment[i]; -+ -+out: -+ return NULL; -+} -+ -+ -+static struct inode *squashfs_new_inode(struct super_block *s, -+ struct squashfs_base_inode_header *inodeb) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct inode *i = new_inode(s); -+ -+ if (i) { -+ i->i_ino = inodeb->inode_number; -+ i->i_mtime.tv_sec = inodeb->mtime; -+ i->i_atime.tv_sec = inodeb->mtime; -+ i->i_ctime.tv_sec = inodeb->mtime; -+ i->i_uid = msblk->uid[inodeb->uid]; -+ i->i_mode = inodeb->mode; -+ i->i_size = 0; -+ if (inodeb->guid == SQUASHFS_GUIDS) -+ i->i_gid = i->i_uid; -+ else -+ i->i_gid = msblk->guid[inodeb->guid]; -+ } -+ -+ return i; -+} -+ -+ -+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode) -+{ -+ struct inode *i; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long block = SQUASHFS_INODE_BLK(inode) + -+ sblk->inode_table_start; -+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); -+ long long next_block; -+ unsigned int next_offset; -+ union squashfs_inode_header id, sid; -+ struct squashfs_base_inode_header *inodeb = &id.base, -+ *sinodeb = &sid.base; -+ -+ TRACE("Entered squashfs_iget\n"); -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) sinodeb, block, -+ offset, sizeof(*sinodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb, -+ sizeof(*sinodeb)); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) inodeb, block, -+ offset, sizeof(*inodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ switch(inodeb->inode_type) { -+ case SQUASHFS_FILE_TYPE: { -+ unsigned int frag_size; -+ long long frag_blk; -+ struct squashfs_reg_inode_header *inodep = &id.reg; -+ struct squashfs_reg_inode_header *sinodep = &sid.reg; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = 1; -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ if (sblk->block_size > 4096) -+ i->i_data.a_ops = &squashfs_aops; -+ else -+ i->i_data.a_ops = &squashfs_aops_4K; -+ -+ TRACE("File inode %x:%x, start_block %llx, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_LREG_TYPE: { -+ unsigned int frag_size; -+ long long frag_blk; -+ struct squashfs_lreg_inode_header *inodep = &id.lreg; -+ struct squashfs_lreg_inode_header *sinodep = &sid.lreg; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ if (sblk->block_size > 4096) -+ i->i_data.a_ops = &squashfs_aops; -+ else -+ i->i_data.a_ops = &squashfs_aops_4K; -+ -+ TRACE("File inode %x:%x, start_block %llx, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_DIR_TYPE: { -+ struct squashfs_dir_inode_header *inodep = &id.dir; -+ struct squashfs_dir_inode_header *sinodep = &sid.dir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops; -+ i->i_fop = &squashfs_dir_ops; -+ i->i_mode |= S_IFDIR; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = 0; -+ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; -+ -+ TRACE("Directory inode %x:%x, start_block %x, offset " -+ "%x\n", SQUASHFS_INODE_BLK(inode), -+ offset, inodep->start_block, -+ inodep->offset); -+ break; -+ } -+ case SQUASHFS_LDIR_TYPE: { -+ struct squashfs_ldir_inode_header *inodep = &id.ldir; -+ struct squashfs_ldir_inode_header *sinodep = &sid.ldir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops; -+ i->i_fop = &squashfs_dir_ops; -+ i->i_mode |= S_IFDIR; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; -+ SQUASHFS_I(i)->u.s2.directory_index_offset = -+ next_offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = -+ inodep->i_count; -+ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; -+ -+ TRACE("Long directory inode %x:%x, start_block %x, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, inodep->offset); -+ break; -+ } -+ case SQUASHFS_SYMLINK_TYPE: { -+ struct squashfs_symlink_inode_header *inodep = -+ &id.symlink; -+ struct squashfs_symlink_inode_header *sinodep = -+ &sid.symlink; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->symlink_size; -+ i->i_op = &page_symlink_inode_operations; -+ i->i_data.a_ops = &squashfs_symlink_aops; -+ i->i_mode |= S_IFLNK; -+ SQUASHFS_I(i)->start_block = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ -+ TRACE("Symbolic link inode %x:%x, start_block %llx, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ next_block, next_offset); -+ break; -+ } -+ case SQUASHFS_BLKDEV_TYPE: -+ case SQUASHFS_CHRDEV_TYPE: { -+ struct squashfs_dev_inode_header *inodep = &id.dev; -+ struct squashfs_dev_inode_header *sinodep = &sid.dev; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if ((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_mode |= (inodeb->inode_type == -+ SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : -+ S_IFBLK; -+ init_special_inode(i, i->i_mode, -+ old_decode_dev(inodep->rdev)); -+ -+ TRACE("Device inode %x:%x, rdev %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->rdev); -+ break; -+ } -+ case SQUASHFS_FIFO_TYPE: -+ case SQUASHFS_SOCKET_TYPE: { -+ struct squashfs_ipc_inode_header *inodep = &id.ipc; -+ struct squashfs_ipc_inode_header *sinodep = &sid.ipc; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if ((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) -+ ? S_IFIFO : S_IFSOCK; -+ init_special_inode(i, i->i_mode, 0); -+ break; -+ } -+ default: -+ ERROR("Unknown inode type %d in squashfs_iget!\n", -+ inodeb->inode_type); -+ goto failed_read1; -+ } -+ -+ insert_inode_hash(i); -+ return i; -+ -+failed_read: -+ ERROR("Unable to read inode [%llx:%x]\n", block, offset); -+ -+failed_read1: -+ return NULL; -+} -+ -+ -+static int read_fragment_index_table(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ /* Allocate fragment index table */ -+ if (!(msblk->fragment_index = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES -+ (sblk->fragments), GFP_KERNEL))) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ return 0; -+ } -+ -+ if (SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments) && -+ !squashfs_read_data(s, (char *) -+ msblk->fragment_index, -+ sblk->fragment_table_start, -+ SQUASHFS_FRAGMENT_INDEX_BYTES -+ (sblk->fragments) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ ERROR("unable to read fragment index table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ long long fragment; -+ -+ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments); -+ i++) { -+ SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment), -+ &msblk->fragment_index[i], 1); -+ msblk->fragment_index[i] = fragment; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ msblk->iget = squashfs_iget; -+ msblk->read_blocklist = read_blocklist; -+ msblk->read_fragment_index_table = read_fragment_index_table; -+ -+ if (sblk->s_major == 1) { -+ if (!squashfs_1_0_supported(msblk)) { -+ SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems " -+ "are unsupported\n"); -+ SERROR("Please recompile with " -+ "Squashfs 1.0 support enabled\n"); -+ return 0; -+ } -+ } else if (sblk->s_major == 2) { -+ if (!squashfs_2_0_supported(msblk)) { -+ SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems " -+ "are unsupported\n"); -+ SERROR("Please recompile with " -+ "Squashfs 2.0 support enabled\n"); -+ return 0; -+ } -+ } else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor > -+ SQUASHFS_MINOR) { -+ SERROR("Major/Minor mismatch, trying to mount newer %d.%d " -+ "filesystem\n", sblk->s_major, sblk->s_minor); -+ SERROR("Please update your kernel\n"); -+ return 0; -+ } -+ -+ return 1; -+} -+ -+ -+static int squashfs_fill_super(struct super_block *s, void *data, int silent) -+{ -+ struct squashfs_sb_info *msblk; -+ struct squashfs_super_block *sblk; -+ int i; -+ char b[BDEVNAME_SIZE]; -+ struct inode *root; -+ -+ TRACE("Entered squashfs_read_superblock\n"); -+ -+ if (!(s->s_fs_info = kmalloc(sizeof(struct squashfs_sb_info), -+ GFP_KERNEL))) { -+ ERROR("Failed to allocate superblock\n"); -+ goto failure; -+ } -+ memset(s->s_fs_info, 0, sizeof(struct squashfs_sb_info)); -+ msblk = s->s_fs_info; -+ sblk = &msblk->sblk; -+ -+ msblk->devblksize = sb_min_blocksize(s, BLOCK_SIZE); -+ msblk->devblksize_log2 = ffz(~msblk->devblksize); -+ -+ init_MUTEX(&msblk->read_data_mutex); -+ init_MUTEX(&msblk->read_page_mutex); -+ init_MUTEX(&msblk->block_cache_mutex); -+ init_MUTEX(&msblk->fragment_mutex); -+ init_MUTEX(&msblk->meta_index_mutex); -+ -+ init_waitqueue_head(&msblk->waitq); -+ init_waitqueue_head(&msblk->fragment_wait_queue); -+ -+ if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START, -+ sizeof(struct squashfs_super_block) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ SERROR("unable to read superblock\n"); -+ goto failed_mount; -+ } -+ -+ /* Check it is a SQUASHFS superblock */ -+ msblk->swap = 0; -+ if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) { -+ if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) { -+ struct squashfs_super_block ssblk; -+ -+ WARNING("Mounting a different endian SQUASHFS " -+ "filesystem on %s\n", bdevname(s->s_bdev, b)); -+ -+ SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk); -+ memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block)); -+ msblk->swap = 1; -+ } else { -+ SERROR("Can't find a SQUASHFS superblock on %s\n", -+ bdevname(s->s_bdev, b)); -+ goto failed_mount; -+ } -+ } -+ -+ /* Check the MAJOR & MINOR versions */ -+ if(!supported_squashfs_filesystem(msblk, silent)) -+ goto failed_mount; -+ -+ TRACE("Found valid superblock on %s\n", bdevname(s->s_bdev, b)); -+ TRACE("Inodes are %scompressed\n", -+ SQUASHFS_UNCOMPRESSED_INODES -+ (sblk->flags) ? "un" : ""); -+ TRACE("Data is %scompressed\n", -+ SQUASHFS_UNCOMPRESSED_DATA(sblk->flags) -+ ? "un" : ""); -+ TRACE("Check data is %s present in the filesystem\n", -+ SQUASHFS_CHECK_DATA(sblk->flags) ? -+ "" : "not"); -+ TRACE("Filesystem size %lld bytes\n", sblk->bytes_used); -+ TRACE("Block size %d\n", sblk->block_size); -+ TRACE("Number of inodes %d\n", sblk->inodes); -+ if (sblk->s_major > 1) -+ TRACE("Number of fragments %d\n", sblk->fragments); -+ TRACE("Number of uids %d\n", sblk->no_uids); -+ TRACE("Number of gids %d\n", sblk->no_guids); -+ TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start); -+ TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start); -+ if (sblk->s_major > 1) -+ TRACE("sblk->fragment_table_start %llx\n", -+ sblk->fragment_table_start); -+ TRACE("sblk->uid_start %llx\n", sblk->uid_start); -+ -+ s->s_flags |= MS_RDONLY; -+ s->s_op = &squashfs_ops; -+ -+ /* Init inode_table block pointer array */ -+ if (!(msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) * -+ SQUASHFS_CACHED_BLKS, GFP_KERNEL))) { -+ ERROR("Failed to allocate block cache\n"); -+ goto failed_mount; -+ } -+ -+ for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) -+ msblk->block_cache[i].block = SQUASHFS_INVALID_BLK; -+ -+ msblk->next_cache = 0; -+ -+ /* Allocate read_data block */ -+ msblk->read_size = (sblk->block_size < SQUASHFS_METADATA_SIZE) ? -+ SQUASHFS_METADATA_SIZE : -+ sblk->block_size; -+ -+ if (!(msblk->read_data = kmalloc(msblk->read_size, GFP_KERNEL))) { -+ ERROR("Failed to allocate read_data block\n"); -+ goto failed_mount; -+ } -+ -+ /* Allocate read_page block */ -+ if (!(msblk->read_page = kmalloc(sblk->block_size, GFP_KERNEL))) { -+ ERROR("Failed to allocate read_page block\n"); -+ goto failed_mount; -+ } -+ -+ /* Allocate uid and gid tables */ -+ if (!(msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int), GFP_KERNEL))) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ goto failed_mount; -+ } -+ msblk->guid = msblk->uid + sblk->no_uids; -+ -+ if (msblk->swap) { -+ unsigned int suid[sblk->no_uids + sblk->no_guids]; -+ -+ if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start, -+ ((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int)) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ ERROR("unable to read uid/gid table\n"); -+ goto failed_mount; -+ } -+ -+ SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids + -+ sblk->no_guids), (sizeof(unsigned int) * 8)); -+ } else -+ if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start, -+ ((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int)) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ ERROR("unable to read uid/gid table\n"); -+ goto failed_mount; -+ } -+ -+ -+ if (sblk->s_major == 1 && squashfs_1_0_supported(msblk)) -+ goto allocate_root; -+ -+ if (!(msblk->fragment = kmalloc(sizeof(struct squashfs_fragment_cache) * -+ SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL))) { -+ ERROR("Failed to allocate fragment block cache\n"); -+ goto failed_mount; -+ } -+ -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) { -+ msblk->fragment[i].locked = 0; -+ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; -+ msblk->fragment[i].data = NULL; -+ } -+ -+ msblk->next_fragment = 0; -+ -+ /* Allocate fragment index table */ -+ if (msblk->read_fragment_index_table(s) == 0) -+ goto failed_mount; -+ -+allocate_root: -+ if ((root = (msblk->iget)(s, sblk->root_inode)) == NULL) -+ goto failed_mount; -+ -+ if ((s->s_root = d_alloc_root(root)) == NULL) { -+ ERROR("Root inode create failed\n"); -+ iput(root); -+ goto failed_mount; -+ } -+ -+ TRACE("Leaving squashfs_read_super\n"); -+ return 0; -+ -+failed_mount: -+ kfree(msblk->fragment_index); -+ kfree(msblk->fragment); -+ kfree(msblk->uid); -+ kfree(msblk->read_page); -+ kfree(msblk->read_data); -+ kfree(msblk->block_cache); -+ kfree(msblk->fragment_index_2); -+ kfree(s->s_fs_info); -+ s->s_fs_info = NULL; -+ return -EINVAL; -+ -+failure: -+ return -ENOMEM; -+} -+ -+ -+static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf) -+{ -+ struct squashfs_sb_info *msblk = dentry->d_inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ TRACE("Entered squashfs_statfs\n"); -+ -+ buf->f_type = SQUASHFS_MAGIC; -+ buf->f_bsize = sblk->block_size; -+ buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1; -+ buf->f_bfree = buf->f_bavail = 0; -+ buf->f_files = sblk->inodes; -+ buf->f_ffree = 0; -+ buf->f_namelen = SQUASHFS_NAME_LEN; -+ -+ return 0; -+} -+ -+ -+static int squashfs_symlink_readpage(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ int index = page->index << PAGE_CACHE_SHIFT, length, bytes; -+ long long block = SQUASHFS_I(inode)->start_block; -+ int offset = SQUASHFS_I(inode)->offset; -+ void *pageaddr = kmap(page); -+ -+ TRACE("Entered squashfs_symlink_readpage, page index %ld, start block " -+ "%llx, offset %x\n", page->index, -+ SQUASHFS_I(inode)->start_block, -+ SQUASHFS_I(inode)->offset); -+ -+ for (length = 0; length < index; length += bytes) { -+ if (!(bytes = squashfs_get_cached_block(inode->i_sb, NULL, -+ block, offset, PAGE_CACHE_SIZE, &block, -+ &offset))) { -+ ERROR("Unable to read symbolic link [%llx:%x]\n", block, -+ offset); -+ goto skip_read; -+ } -+ } -+ -+ if (length != index) { -+ ERROR("(squashfs_symlink_readpage) length != index\n"); -+ bytes = 0; -+ goto skip_read; -+ } -+ -+ bytes = (i_size_read(inode) - length) > PAGE_CACHE_SIZE ? PAGE_CACHE_SIZE : -+ i_size_read(inode) - length; -+ -+ if (!(bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block, -+ offset, bytes, &block, &offset))) -+ ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset); -+ -+skip_read: -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ return 0; -+} -+ -+ -+struct meta_index *locate_meta_index(struct inode *inode, int index, int offset) -+{ -+ struct meta_index *meta = NULL; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ int i; -+ -+ down(&msblk->meta_index_mutex); -+ -+ TRACE("locate_meta_index: index %d, offset %d\n", index, offset); -+ -+ if(msblk->meta_index == NULL) -+ goto not_allocated; -+ -+ for (i = 0; i < SQUASHFS_META_NUMBER; i ++) -+ if (msblk->meta_index[i].inode_number == inode->i_ino && -+ msblk->meta_index[i].offset >= offset && -+ msblk->meta_index[i].offset <= index && -+ msblk->meta_index[i].locked == 0) { -+ TRACE("locate_meta_index: entry %d, offset %d\n", i, -+ msblk->meta_index[i].offset); -+ meta = &msblk->meta_index[i]; -+ offset = meta->offset; -+ } -+ -+ if (meta) -+ meta->locked = 1; -+ -+not_allocated: -+ up(&msblk->meta_index_mutex); -+ -+ return meta; -+} -+ -+ -+struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip) -+{ -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct meta_index *meta = NULL; -+ int i; -+ -+ down(&msblk->meta_index_mutex); -+ -+ TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip); -+ -+ if(msblk->meta_index == NULL) { -+ if (!(msblk->meta_index = kmalloc(sizeof(struct meta_index) * -+ SQUASHFS_META_NUMBER, GFP_KERNEL))) { -+ ERROR("Failed to allocate meta_index\n"); -+ goto failed; -+ } -+ for(i = 0; i < SQUASHFS_META_NUMBER; i++) { -+ msblk->meta_index[i].inode_number = 0; -+ msblk->meta_index[i].locked = 0; -+ } -+ msblk->next_meta_index = 0; -+ } -+ -+ for(i = SQUASHFS_META_NUMBER; i && -+ msblk->meta_index[msblk->next_meta_index].locked; i --) -+ msblk->next_meta_index = (msblk->next_meta_index + 1) % -+ SQUASHFS_META_NUMBER; -+ -+ if(i == 0) { -+ TRACE("empty_meta_index: failed!\n"); -+ goto failed; -+ } -+ -+ TRACE("empty_meta_index: returned meta entry %d, %p\n", -+ msblk->next_meta_index, -+ &msblk->meta_index[msblk->next_meta_index]); -+ -+ meta = &msblk->meta_index[msblk->next_meta_index]; -+ msblk->next_meta_index = (msblk->next_meta_index + 1) % -+ SQUASHFS_META_NUMBER; -+ -+ meta->inode_number = inode->i_ino; -+ meta->offset = offset; -+ meta->skip = skip; -+ meta->entries = 0; -+ meta->locked = 1; -+ -+failed: -+ up(&msblk->meta_index_mutex); -+ return meta; -+} -+ -+ -+void release_meta_index(struct inode *inode, struct meta_index *meta) -+{ -+ meta->locked = 0; -+} -+ -+ -+static int read_block_index(struct super_block *s, int blocks, char *block_list, -+ long long *start_block, int *offset) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ unsigned int *block_listp; -+ int block = 0; -+ -+ if (msblk->swap) { -+ char sblock_list[blocks << 2]; -+ -+ if (!squashfs_get_cached_block(s, sblock_list, *start_block, -+ *offset, blocks << 2, start_block, offset)) { -+ ERROR("Unable to read block list [%llx:%x]\n", -+ *start_block, *offset); -+ goto failure; -+ } -+ SQUASHFS_SWAP_INTS(((unsigned int *)block_list), -+ ((unsigned int *)sblock_list), blocks); -+ } else -+ if (!squashfs_get_cached_block(s, block_list, *start_block, -+ *offset, blocks << 2, start_block, offset)) { -+ ERROR("Unable to read block list [%llx:%x]\n", -+ *start_block, *offset); -+ goto failure; -+ } -+ -+ for (block_listp = (unsigned int *) block_list; blocks; -+ block_listp++, blocks --) -+ block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp); -+ -+ return block; -+ -+failure: -+ return -1; -+} -+ -+ -+#define SIZE 256 -+ -+static inline int calculate_skip(int blocks) { -+ int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES); -+ return skip >= 7 ? 7 : skip + 1; -+} -+ -+ -+static int get_meta_index(struct inode *inode, int index, -+ long long *index_block, int *index_offset, -+ long long *data_block, char *block_list) -+{ -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int skip = calculate_skip(i_size_read(inode) >> sblk->block_log); -+ int offset = 0; -+ struct meta_index *meta; -+ struct meta_entry *meta_entry; -+ long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start; -+ int cur_offset = SQUASHFS_I(inode)->offset; -+ long long cur_data_block = SQUASHFS_I(inode)->start_block; -+ int i; -+ -+ index /= SQUASHFS_META_INDEXES * skip; -+ -+ while ( offset < index ) { -+ meta = locate_meta_index(inode, index, offset + 1); -+ -+ if (meta == NULL) { -+ if ((meta = empty_meta_index(inode, offset + 1, -+ skip)) == NULL) -+ goto all_done; -+ } else { -+ offset = index < meta->offset + meta->entries ? index : -+ meta->offset + meta->entries - 1; -+ meta_entry = &meta->meta_entry[offset - meta->offset]; -+ cur_index_block = meta_entry->index_block + sblk->inode_table_start; -+ cur_offset = meta_entry->offset; -+ cur_data_block = meta_entry->data_block; -+ TRACE("get_meta_index: offset %d, meta->offset %d, " -+ "meta->entries %d\n", offset, meta->offset, -+ meta->entries); -+ TRACE("get_meta_index: index_block 0x%llx, offset 0x%x" -+ " data_block 0x%llx\n", cur_index_block, -+ cur_offset, cur_data_block); -+ } -+ -+ for (i = meta->offset + meta->entries; i <= index && -+ i < meta->offset + SQUASHFS_META_ENTRIES; i++) { -+ int blocks = skip * SQUASHFS_META_INDEXES; -+ -+ while (blocks) { -+ int block = blocks > (SIZE >> 2) ? (SIZE >> 2) : -+ blocks; -+ int res = read_block_index(inode->i_sb, block, -+ block_list, &cur_index_block, -+ &cur_offset); -+ -+ if (res == -1) -+ goto failed; -+ -+ cur_data_block += res; -+ blocks -= block; -+ } -+ -+ meta_entry = &meta->meta_entry[i - meta->offset]; -+ meta_entry->index_block = cur_index_block - sblk->inode_table_start; -+ meta_entry->offset = cur_offset; -+ meta_entry->data_block = cur_data_block; -+ meta->entries ++; -+ offset ++; -+ } -+ -+ TRACE("get_meta_index: meta->offset %d, meta->entries %d\n", -+ meta->offset, meta->entries); -+ -+ release_meta_index(inode, meta); -+ } -+ -+all_done: -+ *index_block = cur_index_block; -+ *index_offset = cur_offset; -+ *data_block = cur_data_block; -+ -+ return offset * SQUASHFS_META_INDEXES * skip; -+ -+failed: -+ release_meta_index(inode, meta); -+ return -1; -+} -+ -+ -+static long long read_blocklist(struct inode *inode, int index, -+ int readahead_blks, char *block_list, -+ unsigned short **block_p, unsigned int *bsize) -+{ -+ long long block_ptr; -+ int offset; -+ long long block; -+ int res = get_meta_index(inode, index, &block_ptr, &offset, &block, -+ block_list); -+ -+ TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset" -+ " 0x%x, block 0x%llx\n", res, index, block_ptr, offset, -+ block); -+ -+ if(res == -1) -+ goto failure; -+ -+ index -= res; -+ -+ while ( index ) { -+ int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index; -+ int res = read_block_index(inode->i_sb, blocks, block_list, -+ &block_ptr, &offset); -+ if (res == -1) -+ goto failure; -+ block += res; -+ index -= blocks; -+ } -+ -+ if (read_block_index(inode->i_sb, 1, block_list, -+ &block_ptr, &offset) == -1) -+ goto failure; -+ *bsize = *((unsigned int *) block_list); -+ -+ return block; -+ -+failure: -+ return 0; -+} -+ -+ -+static int squashfs_readpage(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned char block_list[SIZE]; -+ long long block; -+ unsigned int bsize, i = 0, bytes = 0, byte_offset = 0; -+ int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT); -+ void *pageaddr; -+ struct squashfs_fragment_cache *fragment = NULL; -+ char *data_ptr = msblk->read_page; -+ -+ int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1; -+ int start_index = page->index & ~mask; -+ int end_index = start_index | mask; -+ -+ TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n", -+ page->index, -+ SQUASHFS_I(inode)->start_block); -+ -+ if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> -+ PAGE_CACHE_SHIFT)) -+ goto skip_read; -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || index < (i_size_read(inode) >> -+ sblk->block_log)) { -+ if ((block = (msblk->read_blocklist)(inode, index, 1, -+ block_list, NULL, &bsize)) == 0) -+ goto skip_read; -+ -+ down(&msblk->read_page_mutex); -+ -+ if (!(bytes = squashfs_read_data(inode->i_sb, msblk->read_page, -+ block, bsize, NULL))) { -+ ERROR("Unable to read page, block %llx, size %x\n", block, -+ bsize); -+ up(&msblk->read_page_mutex); -+ goto skip_read; -+ } -+ } else { -+ if ((fragment = get_cached_fragment(inode->i_sb, -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, -+ SQUASHFS_I(inode)->u.s1.fragment_size)) -+ == NULL) { -+ ERROR("Unable to read page, block %llx, size %x\n", -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, -+ (int) SQUASHFS_I(inode)-> -+ u.s1.fragment_size); -+ goto skip_read; -+ } -+ bytes = SQUASHFS_I(inode)->u.s1.fragment_offset + -+ (i_size_read(inode) & (sblk->block_size -+ - 1)); -+ byte_offset = SQUASHFS_I(inode)->u.s1.fragment_offset; -+ data_ptr = fragment->data; -+ } -+ -+ for (i = start_index; i <= end_index && byte_offset < bytes; -+ i++, byte_offset += PAGE_CACHE_SIZE) { -+ struct page *push_page; -+ int available_bytes = (bytes - byte_offset) > PAGE_CACHE_SIZE ? -+ PAGE_CACHE_SIZE : bytes - byte_offset; -+ -+ TRACE("bytes %d, i %d, byte_offset %d, available_bytes %d\n", -+ bytes, i, byte_offset, available_bytes); -+ -+ if (i == page->index) { -+ pageaddr = kmap_atomic(page, KM_USER0); -+ memcpy(pageaddr, data_ptr + byte_offset, -+ available_bytes); -+ memset(pageaddr + available_bytes, 0, -+ PAGE_CACHE_SIZE - available_bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ } else if ((push_page = -+ grab_cache_page_nowait(page->mapping, i))) { -+ pageaddr = kmap_atomic(push_page, KM_USER0); -+ -+ memcpy(pageaddr, data_ptr + byte_offset, -+ available_bytes); -+ memset(pageaddr + available_bytes, 0, -+ PAGE_CACHE_SIZE - available_bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(push_page); -+ SetPageUptodate(push_page); -+ unlock_page(push_page); -+ page_cache_release(push_page); -+ } -+ } -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || index < (i_size_read(inode) >> -+ sblk->block_log)) -+ up(&msblk->read_page_mutex); -+ else -+ release_cached_fragment(msblk, fragment); -+ -+ return 0; -+ -+skip_read: -+ pageaddr = kmap_atomic(page, KM_USER0); -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ return 0; -+} -+ -+ -+static int squashfs_readpage4K(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned char block_list[SIZE]; -+ long long block; -+ unsigned int bsize, bytes = 0; -+ void *pageaddr; -+ -+ TRACE("Entered squashfs_readpage4K, page index %lx, start block %llx\n", -+ page->index, -+ SQUASHFS_I(inode)->start_block); -+ -+ if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> -+ PAGE_CACHE_SHIFT)) { -+ pageaddr = kmap_atomic(page, KM_USER0); -+ goto skip_read; -+ } -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || page->index < (i_size_read(inode) >> -+ sblk->block_log)) { -+ block = (msblk->read_blocklist)(inode, page->index, 1, -+ block_list, NULL, &bsize); -+ -+ down(&msblk->read_page_mutex); -+ bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block, -+ bsize, NULL); -+ pageaddr = kmap_atomic(page, KM_USER0); -+ if (bytes) -+ memcpy(pageaddr, msblk->read_page, bytes); -+ else -+ ERROR("Unable to read page, block %llx, size %x\n", -+ block, bsize); -+ up(&msblk->read_page_mutex); -+ } else { -+ struct squashfs_fragment_cache *fragment = -+ get_cached_fragment(inode->i_sb, -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, -+ SQUASHFS_I(inode)-> u.s1.fragment_size); -+ pageaddr = kmap_atomic(page, KM_USER0); -+ if (fragment) { -+ bytes = i_size_read(inode) & (sblk->block_size - 1); -+ memcpy(pageaddr, fragment->data + SQUASHFS_I(inode)-> -+ u.s1.fragment_offset, bytes); -+ release_cached_fragment(msblk, fragment); -+ } else -+ ERROR("Unable to read page, block %llx, size %x\n", -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, (int) -+ SQUASHFS_I(inode)-> u.s1.fragment_size); -+ } -+ -+skip_read: -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ return 0; -+} -+ -+ -+static int get_dir_index_using_offset(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ long long f_pos) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index index; -+ -+ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", -+ i_count, (unsigned int) f_pos); -+ -+ f_pos =- 3; -+ if (f_pos == 0) -+ goto finish; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX(&index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) &index, -+ index_start, index_offset, -+ sizeof(index), &index_start, -+ &index_offset); -+ -+ if (index.index > f_pos) -+ break; -+ -+ squashfs_get_cached_block(s, NULL, index_start, index_offset, -+ index.size + 1, &index_start, -+ &index_offset); -+ -+ length = index.index; -+ *next_block = index.start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ -+finish: -+ return length + 3; -+} -+ -+ -+static int get_dir_index_using_name(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ const char *name, int size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ char buffer[sizeof(struct squashfs_dir_index) + SQUASHFS_NAME_LEN + 1]; -+ struct squashfs_dir_index *index = (struct squashfs_dir_index *) buffer; -+ char str[SQUASHFS_NAME_LEN + 1]; -+ -+ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); -+ -+ strncpy(str, name, size); -+ str[size] = '\0'; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX(index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) index, -+ index_start, index_offset, -+ sizeof(struct squashfs_dir_index), -+ &index_start, &index_offset); -+ -+ squashfs_get_cached_block(s, index->name, index_start, -+ index_offset, index->size + 1, -+ &index_start, &index_offset); -+ -+ index->name[index->size + 1] = '\0'; -+ -+ if (strcmp(index->name, str) > 0) -+ break; -+ -+ length = index->index; -+ *next_block = index->start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ return length + 3; -+} -+ -+ -+static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir) -+{ -+ struct inode *i = file->f_dentry->d_inode; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0, -+ dir_count; -+ struct squashfs_dir_header dirh; -+ char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN + 1]; -+ struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer; -+ -+ TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset); -+ -+ while(file->f_pos < 3) { -+ char *name; -+ int size, i_ino; -+ -+ if(file->f_pos == 0) { -+ name = "."; -+ size = 1; -+ i_ino = i->i_ino; -+ } else { -+ name = ".."; -+ size = 2; -+ i_ino = SQUASHFS_I(i)->u.s2.parent_inode; -+ } -+ TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n", -+ (unsigned int) dirent, name, size, (int) -+ file->f_pos, i_ino, -+ squashfs_filetype_table[1]); -+ -+ if (filldir(dirent, name, size, -+ file->f_pos, i_ino, -+ squashfs_filetype_table[1]) < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos += size; -+ dirs_read++; -+ } -+ -+ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, -+ file->f_pos); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header sdirh; -+ -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block, next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block, next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, -+ dire->size + 1, &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (file->f_pos >= length) -+ continue; -+ -+ dire->name[dire->size + 1] = '\0'; -+ -+ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n", -+ (unsigned int) dirent, dire->name, -+ dire->size + 1, (int) file->f_pos, -+ dirh.start_block, dire->offset, -+ dirh.inode_number + dire->inode_number, -+ squashfs_filetype_table[dire->type]); -+ -+ if (filldir(dirent, dire->name, dire->size + 1, -+ file->f_pos, -+ dirh.inode_number + dire->inode_number, -+ squashfs_filetype_table[dire->type]) -+ < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos = length; -+ dirs_read++; -+ } -+ } -+ -+finish: -+ return dirs_read; -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ return 0; -+} -+ -+ -+static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry, -+ struct nameidata *nd) -+{ -+ const unsigned char *name = dentry->d_name.name; -+ int len = dentry->d_name.len; -+ struct inode *inode = NULL; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header dirh; -+ char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN]; -+ struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer; -+ -+ TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset); -+ -+ if (len > SQUASHFS_NAME_LEN) -+ goto exit_loop; -+ -+ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, name, -+ len); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header sdirh; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block,next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block,next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, dire->size + 1, -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (name[0] < dire->name[0]) -+ goto exit_loop; -+ -+ if ((len == dire->size + 1) && !strncmp(name, -+ dire->name, len)) { -+ squashfs_inode_t ino = -+ SQUASHFS_MKINODE(dirh.start_block, -+ dire->offset); -+ -+ TRACE("calling squashfs_iget for directory " -+ "entry %s, inode %x:%x, %d\n", name, -+ dirh.start_block, dire->offset, -+ dirh.inode_number + dire->inode_number); -+ -+ inode = (msblk->iget)(i->i_sb, ino); -+ -+ goto exit_loop; -+ } -+ } -+ } -+ -+exit_loop: -+ d_add(dentry, inode); -+ return ERR_PTR(0); -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ goto exit_loop; -+} -+ -+ -+static void squashfs_put_super(struct super_block *s) -+{ -+ int i; -+ -+ if (s->s_fs_info) { -+ struct squashfs_sb_info *sbi = s->s_fs_info; -+ if (sbi->block_cache) -+ for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) -+ if (sbi->block_cache[i].block != -+ SQUASHFS_INVALID_BLK) -+ kfree(sbi->block_cache[i].data); -+ if (sbi->fragment) -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) -+ SQUASHFS_FREE(sbi->fragment[i].data); -+ kfree(sbi->fragment); -+ kfree(sbi->block_cache); -+ kfree(sbi->read_data); -+ kfree(sbi->read_page); -+ kfree(sbi->uid); -+ kfree(sbi->fragment_index); -+ kfree(sbi->fragment_index_2); -+ kfree(sbi->meta_index); -+ kfree(s->s_fs_info); -+ s->s_fs_info = NULL; -+ } -+} -+ -+ -+static int squashfs_get_sb(struct file_system_type *fs_type, -+ int flags, const char *dev_name, void *data, -+ struct vfsmount *mnt) -+{ -+ return get_sb_bdev(fs_type, flags, dev_name, data, squashfs_fill_super, mnt); -+} -+ -+ -+static int __init init_squashfs_fs(void) -+{ -+ int err = init_inodecache(); -+ if (err) -+ goto out; -+ -+ printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) " -+ "Phillip Lougher\n"); -+ -+ if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) { -+ ERROR("Failed to allocate zlib workspace\n"); -+ destroy_inodecache(); -+ err = -ENOMEM; -+ goto out; -+ } -+ -+ if ((err = register_filesystem(&squashfs_fs_type))) { -+ vfree(stream.workspace); -+ destroy_inodecache(); -+ } -+ -+out: -+ return err; -+} -+ -+ -+static void __exit exit_squashfs_fs(void) -+{ -+ vfree(stream.workspace); -+ unregister_filesystem(&squashfs_fs_type); -+ destroy_inodecache(); -+} -+ -+ -+static kmem_cache_t * squashfs_inode_cachep; -+ -+ -+static struct inode *squashfs_alloc_inode(struct super_block *sb) -+{ -+ struct squashfs_inode_info *ei; -+ ei = kmem_cache_alloc(squashfs_inode_cachep, SLAB_KERNEL); -+ if (!ei) -+ return NULL; -+ return &ei->vfs_inode; -+} -+ -+ -+static void squashfs_destroy_inode(struct inode *inode) -+{ -+ kmem_cache_free(squashfs_inode_cachep, SQUASHFS_I(inode)); -+} -+ -+ -+static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags) -+{ -+ struct squashfs_inode_info *ei = foo; -+ -+ if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == -+ SLAB_CTOR_CONSTRUCTOR) -+ inode_init_once(&ei->vfs_inode); -+} -+ -+ -+static int __init init_inodecache(void) -+{ -+ squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache", -+ sizeof(struct squashfs_inode_info), -+ 0, SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT, -+ init_once, NULL); -+ if (squashfs_inode_cachep == NULL) -+ return -ENOMEM; -+ return 0; -+} -+ -+ -+static void destroy_inodecache(void) -+{ -+ kmem_cache_destroy(squashfs_inode_cachep); -+} -+ -+ -+module_init(init_squashfs_fs); -+module_exit(exit_squashfs_fs); -+MODULE_DESCRIPTION("squashfs, a compressed read-only filesystem"); -+MODULE_AUTHOR("Phillip Lougher "); -+MODULE_LICENSE("GPL"); -diff -urN linux-2.6.19.old/fs/squashfs/Makefile linux-2.6.19.dev/fs/squashfs/Makefile ---- linux-2.6.19.old/fs/squashfs/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/squashfs/Makefile 2006-12-14 03:13:16.000000000 +0100 -@@ -0,0 +1,7 @@ -+# -+# Makefile for the linux squashfs routines. -+# -+ -+obj-$(CONFIG_SQUASHFS) += squashfs.o -+squashfs-y += inode.o -+squashfs-y += squashfs2_0.o -diff -urN linux-2.6.19.old/fs/squashfs/squashfs2_0.c linux-2.6.19.dev/fs/squashfs/squashfs2_0.c ---- linux-2.6.19.old/fs/squashfs/squashfs2_0.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/squashfs/squashfs2_0.c 2006-12-14 03:13:16.000000000 +0100 -@@ -0,0 +1,758 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs2_0.c -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "squashfs.h" -+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir); -+static struct dentry *squashfs_lookup_2(struct inode *, struct dentry *, -+ struct nameidata *); -+ -+static struct file_operations squashfs_dir_ops_2 = { -+ .read = generic_read_dir, -+ .readdir = squashfs_readdir_2 -+}; -+ -+static struct inode_operations squashfs_dir_inode_ops_2 = { -+ .lookup = squashfs_lookup_2 -+}; -+ -+static unsigned char squashfs_filetype_table[] = { -+ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK -+}; -+ -+static int read_fragment_index_table_2(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2 -+ (sblk->fragments), GFP_KERNEL))) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ return 0; -+ } -+ -+ if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) && -+ !squashfs_read_data(s, (char *) -+ msblk->fragment_index_2, -+ sblk->fragment_table_start, -+ SQUASHFS_FRAGMENT_INDEX_BYTES_2 -+ (sblk->fragments) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ ERROR("unable to read fragment index table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ unsigned int fragment; -+ -+ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments); -+ i++) { -+ SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment), -+ &msblk->fragment_index_2[i], 1); -+ msblk->fragment_index_2[i] = fragment; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int get_fragment_location_2(struct super_block *s, unsigned int fragment, -+ long long *fragment_start_block, -+ unsigned int *fragment_size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start_block = -+ msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)]; -+ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment); -+ struct squashfs_fragment_entry_2 fragment_entry; -+ -+ if (msblk->swap) { -+ struct squashfs_fragment_entry_2 sfragment_entry; -+ -+ if (!squashfs_get_cached_block(s, (char *) &sfragment_entry, -+ start_block, offset, -+ sizeof(sfragment_entry), &start_block, -+ &offset)) -+ goto out; -+ SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) &fragment_entry, -+ start_block, offset, -+ sizeof(fragment_entry), &start_block, -+ &offset)) -+ goto out; -+ -+ *fragment_start_block = fragment_entry.start_block; -+ *fragment_size = fragment_entry.size; -+ -+ return 1; -+ -+out: -+ return 0; -+} -+ -+ -+static struct inode *squashfs_new_inode(struct super_block *s, -+ struct squashfs_base_inode_header_2 *inodeb, unsigned int ino) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ struct inode *i = new_inode(s); -+ -+ if (i) { -+ i->i_ino = ino; -+ i->i_mtime.tv_sec = sblk->mkfs_time; -+ i->i_atime.tv_sec = sblk->mkfs_time; -+ i->i_ctime.tv_sec = sblk->mkfs_time; -+ i->i_uid = msblk->uid[inodeb->uid]; -+ i->i_mode = inodeb->mode; -+ i->i_nlink = 1; -+ i->i_size = 0; -+ if (inodeb->guid == SQUASHFS_GUIDS) -+ i->i_gid = i->i_uid; -+ else -+ i->i_gid = msblk->guid[inodeb->guid]; -+ } -+ -+ return i; -+} -+ -+ -+static struct inode *squashfs_iget_2(struct super_block *s, squashfs_inode_t inode) -+{ -+ struct inode *i; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned int block = SQUASHFS_INODE_BLK(inode) + -+ sblk->inode_table_start; -+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); -+ unsigned int ino = SQUASHFS_MK_VFS_INODE(block -+ - sblk->inode_table_start, offset); -+ long long next_block; -+ unsigned int next_offset; -+ union squashfs_inode_header_2 id, sid; -+ struct squashfs_base_inode_header_2 *inodeb = &id.base, -+ *sinodeb = &sid.base; -+ -+ TRACE("Entered squashfs_iget\n"); -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) sinodeb, block, -+ offset, sizeof(*sinodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb, -+ sizeof(*sinodeb)); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) inodeb, block, -+ offset, sizeof(*inodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ switch(inodeb->inode_type) { -+ case SQUASHFS_FILE_TYPE: { -+ struct squashfs_reg_inode_header_2 *inodep = &id.reg; -+ struct squashfs_reg_inode_header_2 *sinodep = &sid.reg; -+ long long frag_blk; -+ unsigned int frag_size; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location_2(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ i->i_blksize = PAGE_CACHE_SIZE; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ if (sblk->block_size > 4096) -+ i->i_data.a_ops = &squashfs_aops; -+ else -+ i->i_data.a_ops = &squashfs_aops_4K; -+ -+ TRACE("File inode %x:%x, start_block %x, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_DIR_TYPE: { -+ struct squashfs_dir_inode_header_2 *inodep = &id.dir; -+ struct squashfs_dir_inode_header_2 *sinodep = &sid.dir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops_2; -+ i->i_fop = &squashfs_dir_ops_2; -+ i->i_mode |= S_IFDIR; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = 0; -+ SQUASHFS_I(i)->u.s2.parent_inode = 0; -+ -+ TRACE("Directory inode %x:%x, start_block %x, offset " -+ "%x\n", SQUASHFS_INODE_BLK(inode), -+ offset, inodep->start_block, -+ inodep->offset); -+ break; -+ } -+ case SQUASHFS_LDIR_TYPE: { -+ struct squashfs_ldir_inode_header_2 *inodep = &id.ldir; -+ struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops_2; -+ i->i_fop = &squashfs_dir_ops_2; -+ i->i_mode |= S_IFDIR; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; -+ SQUASHFS_I(i)->u.s2.directory_index_offset = -+ next_offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = -+ inodep->i_count; -+ SQUASHFS_I(i)->u.s2.parent_inode = 0; -+ -+ TRACE("Long directory inode %x:%x, start_block %x, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, inodep->offset); -+ break; -+ } -+ case SQUASHFS_SYMLINK_TYPE: { -+ struct squashfs_symlink_inode_header_2 *inodep = -+ &id.symlink; -+ struct squashfs_symlink_inode_header_2 *sinodep = -+ &sid.symlink; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_size = inodep->symlink_size; -+ i->i_op = &page_symlink_inode_operations; -+ i->i_data.a_ops = &squashfs_symlink_aops; -+ i->i_mode |= S_IFLNK; -+ SQUASHFS_I(i)->start_block = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ -+ TRACE("Symbolic link inode %x:%x, start_block %llx, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ next_block, next_offset); -+ break; -+ } -+ case SQUASHFS_BLKDEV_TYPE: -+ case SQUASHFS_CHRDEV_TYPE: { -+ struct squashfs_dev_inode_header_2 *inodep = &id.dev; -+ struct squashfs_dev_inode_header_2 *sinodep = &sid.dev; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_mode |= (inodeb->inode_type == -+ SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : -+ S_IFBLK; -+ init_special_inode(i, i->i_mode, -+ old_decode_dev(inodep->rdev)); -+ -+ TRACE("Device inode %x:%x, rdev %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->rdev); -+ break; -+ } -+ case SQUASHFS_FIFO_TYPE: -+ case SQUASHFS_SOCKET_TYPE: { -+ if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) -+ ? S_IFIFO : S_IFSOCK; -+ init_special_inode(i, i->i_mode, 0); -+ break; -+ } -+ default: -+ ERROR("Unknown inode type %d in squashfs_iget!\n", -+ inodeb->inode_type); -+ goto failed_read1; -+ } -+ -+ insert_inode_hash(i); -+ return i; -+ -+failed_read: -+ ERROR("Unable to read inode [%x:%x]\n", block, offset); -+ -+failed_read1: -+ return NULL; -+} -+ -+ -+static int get_dir_index_using_offset(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ long long f_pos) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index_2 index; -+ -+ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", -+ i_count, (unsigned int) f_pos); -+ -+ if (f_pos == 0) -+ goto finish; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index_2 sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) &index, -+ index_start, index_offset, -+ sizeof(index), &index_start, -+ &index_offset); -+ -+ if (index.index > f_pos) -+ break; -+ -+ squashfs_get_cached_block(s, NULL, index_start, index_offset, -+ index.size + 1, &index_start, -+ &index_offset); -+ -+ length = index.index; -+ *next_block = index.start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ -+finish: -+ return length; -+} -+ -+ -+static int get_dir_index_using_name(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ const char *name, int size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ char buffer[sizeof(struct squashfs_dir_index_2) + SQUASHFS_NAME_LEN + 1]; -+ struct squashfs_dir_index_2 *index = (struct squashfs_dir_index_2 *) buffer; -+ char str[SQUASHFS_NAME_LEN + 1]; -+ -+ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); -+ -+ strncpy(str, name, size); -+ str[size] = '\0'; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index_2 sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) index, -+ index_start, index_offset, -+ sizeof(struct squashfs_dir_index_2), -+ &index_start, &index_offset); -+ -+ squashfs_get_cached_block(s, index->name, index_start, -+ index_offset, index->size + 1, -+ &index_start, &index_offset); -+ -+ index->name[index->size + 1] = '\0'; -+ -+ if (strcmp(index->name, str) > 0) -+ break; -+ -+ length = index->index; -+ *next_block = index->start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ return length; -+} -+ -+ -+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir) -+{ -+ struct inode *i = file->f_dentry->d_inode; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0, -+ dir_count; -+ struct squashfs_dir_header_2 dirh; -+ char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN + 1]; -+ struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer; -+ -+ TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset); -+ -+ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, -+ file->f_pos); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header_2 sdirh; -+ -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry_2 sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block, next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block, next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, -+ dire->size + 1, &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (file->f_pos >= length) -+ continue; -+ -+ dire->name[dire->size + 1] = '\0'; -+ -+ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n", -+ (unsigned int) dirent, dire->name, -+ dire->size + 1, (int) file->f_pos, -+ dirh.start_block, dire->offset, -+ squashfs_filetype_table[dire->type]); -+ -+ if (filldir(dirent, dire->name, dire->size + 1, -+ file->f_pos, SQUASHFS_MK_VFS_INODE( -+ dirh.start_block, dire->offset), -+ squashfs_filetype_table[dire->type]) -+ < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos = length; -+ dirs_read++; -+ } -+ } -+ -+finish: -+ return dirs_read; -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ return 0; -+} -+ -+ -+static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry, -+ struct nameidata *nd) -+{ -+ const unsigned char *name = dentry->d_name.name; -+ int len = dentry->d_name.len; -+ struct inode *inode = NULL; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header_2 dirh; -+ char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN]; -+ struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer; -+ int sorted = sblk->s_major == 2 && sblk->s_minor >= 1; -+ -+ TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset); -+ -+ if (len > SQUASHFS_NAME_LEN) -+ goto exit_loop; -+ -+ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, name, -+ len); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header_2 sdirh; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry_2 sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block,next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block,next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, dire->size + 1, -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (sorted && name[0] < dire->name[0]) -+ goto exit_loop; -+ -+ if ((len == dire->size + 1) && !strncmp(name, -+ dire->name, len)) { -+ squashfs_inode_t ino = -+ SQUASHFS_MKINODE(dirh.start_block, -+ dire->offset); -+ -+ TRACE("calling squashfs_iget for directory " -+ "entry %s, inode %x:%x, %lld\n", name, -+ dirh.start_block, dire->offset, ino); -+ -+ inode = (msblk->iget)(i->i_sb, ino); -+ -+ goto exit_loop; -+ } -+ } -+ } -+ -+exit_loop: -+ d_add(dentry, inode); -+ return ERR_PTR(0); -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ goto exit_loop; -+} -+ -+ -+int squashfs_2_0_supported(struct squashfs_sb_info *msblk) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ msblk->iget = squashfs_iget_2; -+ msblk->read_fragment_index_table = read_fragment_index_table_2; -+ -+ sblk->bytes_used = sblk->bytes_used_2; -+ sblk->uid_start = sblk->uid_start_2; -+ sblk->guid_start = sblk->guid_start_2; -+ sblk->inode_table_start = sblk->inode_table_start_2; -+ sblk->directory_table_start = sblk->directory_table_start_2; -+ sblk->fragment_table_start = sblk->fragment_table_start_2; -+ -+ return 1; -+} -diff -urN linux-2.6.19.old/fs/squashfs/squashfs.h linux-2.6.19.dev/fs/squashfs/squashfs.h ---- linux-2.6.19.old/fs/squashfs/squashfs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/squashfs/squashfs.h 2006-12-14 03:13:16.000000000 +0100 -@@ -0,0 +1,86 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs.h -+ */ -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+#endif -+ -+#ifdef SQUASHFS_TRACE -+#define TRACE(s, args...) printk(KERN_NOTICE "SQUASHFS: "s, ## args) -+#else -+#define TRACE(s, args...) {} -+#endif -+ -+#define ERROR(s, args...) printk(KERN_ERR "SQUASHFS error: "s, ## args) -+ -+#define SERROR(s, args...) do { \ -+ if (!silent) \ -+ printk(KERN_ERR "SQUASHFS error: "s, ## args);\ -+ } while(0) -+ -+#define WARNING(s, args...) printk(KERN_WARNING "SQUASHFS: "s, ## args) -+ -+static inline struct squashfs_inode_info *SQUASHFS_I(struct inode *inode) -+{ -+ return list_entry(inode, struct squashfs_inode_info, vfs_inode); -+} -+ -+#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY) -+#define SQSH_EXTERN -+extern unsigned int squashfs_read_data(struct super_block *s, char *buffer, -+ long long index, unsigned int length, -+ long long *next_index); -+extern int squashfs_get_cached_block(struct super_block *s, char *buffer, -+ long long block, unsigned int offset, -+ int length, long long *next_block, -+ unsigned int *next_offset); -+extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct -+ squashfs_fragment_cache *fragment); -+extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block -+ *s, long long start_block, -+ int length); -+extern struct address_space_operations squashfs_symlink_aops; -+extern struct address_space_operations squashfs_aops; -+extern struct address_space_operations squashfs_aops_4K; -+extern struct inode_operations squashfs_dir_inode_ops; -+#else -+#define SQSH_EXTERN static -+#endif -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk); -+#else -+static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk) -+{ -+ return 0; -+} -+#endif -+ -+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk); -+#else -+static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk) -+{ -+ return 0; -+} -+#endif -diff -urN linux-2.6.19.old/include/linux/squashfs_fs.h linux-2.6.19.dev/include/linux/squashfs_fs.h ---- linux-2.6.19.old/include/linux/squashfs_fs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/squashfs_fs.h 2006-12-14 03:13:16.000000000 +0100 -@@ -0,0 +1,911 @@ -+#ifndef SQUASHFS_FS -+#define SQUASHFS_FS -+ -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs.h -+ */ -+ -+#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#define CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#endif -+ -+#ifdef CONFIG_SQUASHFS_VMALLOC -+#define SQUASHFS_ALLOC(a) vmalloc(a) -+#define SQUASHFS_FREE(a) vfree(a) -+#else -+#define SQUASHFS_ALLOC(a) kmalloc(a, GFP_KERNEL) -+#define SQUASHFS_FREE(a) kfree(a) -+#endif -+#define SQUASHFS_CACHED_FRAGMENTS CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE -+#define SQUASHFS_MAJOR 3 -+#define SQUASHFS_MINOR 0 -+#define SQUASHFS_MAGIC 0x73717368 -+#define SQUASHFS_MAGIC_SWAP 0x68737173 -+#define SQUASHFS_START 0 -+ -+/* size of metadata (inode and directory) blocks */ -+#define SQUASHFS_METADATA_SIZE 8192 -+#define SQUASHFS_METADATA_LOG 13 -+ -+/* default size of data blocks */ -+#define SQUASHFS_FILE_SIZE 65536 -+#define SQUASHFS_FILE_LOG 16 -+ -+#define SQUASHFS_FILE_MAX_SIZE 65536 -+ -+/* Max number of uids and gids */ -+#define SQUASHFS_UIDS 256 -+#define SQUASHFS_GUIDS 255 -+ -+/* Max length of filename (not 255) */ -+#define SQUASHFS_NAME_LEN 256 -+ -+#define SQUASHFS_INVALID ((long long) 0xffffffffffff) -+#define SQUASHFS_INVALID_FRAG ((unsigned int) 0xffffffff) -+#define SQUASHFS_INVALID_BLK ((long long) -1) -+#define SQUASHFS_USED_BLK ((long long) -2) -+ -+/* Filesystem flags */ -+#define SQUASHFS_NOI 0 -+#define SQUASHFS_NOD 1 -+#define SQUASHFS_CHECK 2 -+#define SQUASHFS_NOF 3 -+#define SQUASHFS_NO_FRAG 4 -+#define SQUASHFS_ALWAYS_FRAG 5 -+#define SQUASHFS_DUPLICATE 6 -+ -+#define SQUASHFS_BIT(flag, bit) ((flag >> bit) & 1) -+ -+#define SQUASHFS_UNCOMPRESSED_INODES(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOI) -+ -+#define SQUASHFS_UNCOMPRESSED_DATA(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOD) -+ -+#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOF) -+ -+#define SQUASHFS_NO_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NO_FRAG) -+ -+#define SQUASHFS_ALWAYS_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_ALWAYS_FRAG) -+ -+#define SQUASHFS_DUPLICATES(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_DUPLICATE) -+ -+#define SQUASHFS_CHECK_DATA(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_CHECK) -+ -+#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \ -+ duplicate_checking) (noi | (nod << 1) | (check_data << 2) \ -+ | (nof << 3) | (no_frag << 4) | (always_frag << 5) | \ -+ (duplicate_checking << 6)) -+ -+/* Max number of types and file types */ -+#define SQUASHFS_DIR_TYPE 1 -+#define SQUASHFS_FILE_TYPE 2 -+#define SQUASHFS_SYMLINK_TYPE 3 -+#define SQUASHFS_BLKDEV_TYPE 4 -+#define SQUASHFS_CHRDEV_TYPE 5 -+#define SQUASHFS_FIFO_TYPE 6 -+#define SQUASHFS_SOCKET_TYPE 7 -+#define SQUASHFS_LDIR_TYPE 8 -+#define SQUASHFS_LREG_TYPE 9 -+ -+/* 1.0 filesystem type definitions */ -+#define SQUASHFS_TYPES 5 -+#define SQUASHFS_IPC_TYPE 0 -+ -+/* Flag whether block is compressed or uncompressed, bit is set if block is -+ * uncompressed */ -+#define SQUASHFS_COMPRESSED_BIT (1 << 15) -+ -+#define SQUASHFS_COMPRESSED_SIZE(B) (((B) & ~SQUASHFS_COMPRESSED_BIT) ? \ -+ (B) & ~SQUASHFS_COMPRESSED_BIT : SQUASHFS_COMPRESSED_BIT) -+ -+#define SQUASHFS_COMPRESSED(B) (!((B) & SQUASHFS_COMPRESSED_BIT)) -+ -+#define SQUASHFS_COMPRESSED_BIT_BLOCK (1 << 24) -+ -+#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B) (((B) & \ -+ ~SQUASHFS_COMPRESSED_BIT_BLOCK) ? (B) & \ -+ ~SQUASHFS_COMPRESSED_BIT_BLOCK : SQUASHFS_COMPRESSED_BIT_BLOCK) -+ -+#define SQUASHFS_COMPRESSED_BLOCK(B) (!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK)) -+ -+/* -+ * Inode number ops. Inodes consist of a compressed block number, and an -+ * uncompressed offset within that block -+ */ -+#define SQUASHFS_INODE_BLK(a) ((unsigned int) ((a) >> 16)) -+ -+#define SQUASHFS_INODE_OFFSET(a) ((unsigned int) ((a) & 0xffff)) -+ -+#define SQUASHFS_MKINODE(A, B) ((squashfs_inode_t)(((squashfs_inode_t) (A)\ -+ << 16) + (B))) -+ -+/* Compute 32 bit VFS inode number from squashfs inode number */ -+#define SQUASHFS_MK_VFS_INODE(a, b) ((unsigned int) (((a) << 8) + \ -+ ((b) >> 2) + 1)) -+/* XXX */ -+ -+/* Translate between VFS mode and squashfs mode */ -+#define SQUASHFS_MODE(a) ((a) & 0xfff) -+ -+/* fragment and fragment table defines */ -+#define SQUASHFS_FRAGMENT_BYTES(A) (A * sizeof(struct squashfs_fragment_entry)) -+ -+#define SQUASHFS_FRAGMENT_INDEX(A) (SQUASHFS_FRAGMENT_BYTES(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A) (SQUASHFS_FRAGMENT_BYTES(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEXES(A) ((SQUASHFS_FRAGMENT_BYTES(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_BYTES(A) (SQUASHFS_FRAGMENT_INDEXES(A) *\ -+ sizeof(long long)) -+ -+/* cached data constants for filesystem */ -+#define SQUASHFS_CACHED_BLKS 8 -+ -+#define SQUASHFS_MAX_FILE_SIZE_LOG 64 -+ -+#define SQUASHFS_MAX_FILE_SIZE ((long long) 1 << \ -+ (SQUASHFS_MAX_FILE_SIZE_LOG - 2)) -+ -+#define SQUASHFS_MARKER_BYTE 0xff -+ -+/* meta index cache */ -+#define SQUASHFS_META_INDEXES (SQUASHFS_METADATA_SIZE / sizeof(unsigned int)) -+#define SQUASHFS_META_ENTRIES 31 -+#define SQUASHFS_META_NUMBER 8 -+#define SQUASHFS_SLOTS 4 -+ -+struct meta_entry { -+ long long data_block; -+ unsigned int index_block; -+ unsigned short offset; -+ unsigned short pad; -+}; -+ -+struct meta_index { -+ unsigned int inode_number; -+ unsigned int offset; -+ unsigned short entries; -+ unsigned short skip; -+ unsigned short locked; -+ unsigned short pad; -+ struct meta_entry meta_entry[SQUASHFS_META_ENTRIES]; -+}; -+ -+ -+/* -+ * definitions for structures on disk -+ */ -+ -+typedef long long squashfs_block_t; -+typedef long long squashfs_inode_t; -+ -+struct squashfs_super_block { -+ unsigned int s_magic; -+ unsigned int inodes; -+ unsigned int bytes_used_2; -+ unsigned int uid_start_2; -+ unsigned int guid_start_2; -+ unsigned int inode_table_start_2; -+ unsigned int directory_table_start_2; -+ unsigned int s_major:16; -+ unsigned int s_minor:16; -+ unsigned int block_size_1:16; -+ unsigned int block_log:16; -+ unsigned int flags:8; -+ unsigned int no_uids:8; -+ unsigned int no_guids:8; -+ unsigned int mkfs_time /* time of filesystem creation */; -+ squashfs_inode_t root_inode; -+ unsigned int block_size; -+ unsigned int fragments; -+ unsigned int fragment_table_start_2; -+ long long bytes_used; -+ long long uid_start; -+ long long guid_start; -+ long long inode_table_start; -+ long long directory_table_start; -+ long long fragment_table_start; -+ long long unused; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_index { -+ unsigned int index; -+ unsigned int start_block; -+ unsigned char size; -+ unsigned char name[0]; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_BASE_INODE_HEADER \ -+ unsigned int inode_type:4; \ -+ unsigned int mode:12; \ -+ unsigned int uid:8; \ -+ unsigned int guid:8; \ -+ unsigned int mtime; \ -+ unsigned int inode_number; -+ -+struct squashfs_base_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ squashfs_block_t start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ unsigned int file_size; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_lreg_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ squashfs_block_t start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ long long file_size; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int start_block; -+ unsigned int parent_inode; -+} __attribute__ ((packed)); -+ -+struct squashfs_ldir_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned int file_size:27; -+ unsigned int offset:13; -+ unsigned int start_block; -+ unsigned int i_count:16; -+ unsigned int parent_inode; -+ struct squashfs_dir_index index[0]; -+} __attribute__ ((packed)); -+ -+union squashfs_inode_header { -+ struct squashfs_base_inode_header base; -+ struct squashfs_dev_inode_header dev; -+ struct squashfs_symlink_inode_header symlink; -+ struct squashfs_reg_inode_header reg; -+ struct squashfs_lreg_inode_header lreg; -+ struct squashfs_dir_inode_header dir; -+ struct squashfs_ldir_inode_header ldir; -+ struct squashfs_ipc_inode_header ipc; -+}; -+ -+struct squashfs_dir_entry { -+ unsigned int offset:13; -+ unsigned int type:3; -+ unsigned int size:8; -+ int inode_number:16; -+ char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_header { -+ unsigned int count:8; -+ unsigned int start_block; -+ unsigned int inode_number; -+} __attribute__ ((packed)); -+ -+struct squashfs_fragment_entry { -+ long long start_block; -+ unsigned int size; -+ unsigned int unused; -+} __attribute__ ((packed)); -+ -+extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen); -+extern int squashfs_uncompress_init(void); -+extern int squashfs_uncompress_exit(void); -+ -+/* -+ * macros to convert each packed bitfield structure from little endian to big -+ * endian and vice versa. These are needed when creating or using a filesystem -+ * on a machine with different byte ordering to the target architecture. -+ * -+ */ -+ -+#define SQUASHFS_SWAP_START \ -+ int bits;\ -+ int b_pos;\ -+ unsigned long long val;\ -+ unsigned char *s;\ -+ unsigned char *d; -+ -+#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\ -+ SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->inodes, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\ -+ SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->s_major, d, 224, 16);\ -+ SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\ -+ SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\ -+ SQUASHFS_SWAP((s)->block_log, d, 272, 16);\ -+ SQUASHFS_SWAP((s)->flags, d, 288, 8);\ -+ SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\ -+ SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\ -+ SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\ -+ SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\ -+ SQUASHFS_SWAP((s)->block_size, d, 408, 32);\ -+ SQUASHFS_SWAP((s)->fragments, d, 440, 32);\ -+ SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\ -+ SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\ -+ SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\ -+ SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\ -+ SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\ -+ SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\ -+ SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\ -+ SQUASHFS_SWAP((s)->unused, d, 888, 64);\ -+} -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ -+ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 64, 32); -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_ipc_inode_header))\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_dev_inode_header)); \ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->rdev, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_reg_inode_header));\ -+ SQUASHFS_SWAP((s)->start_block, d, 96, 64);\ -+ SQUASHFS_SWAP((s)->fragment, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 224, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_lreg_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 128, 64);\ -+ SQUASHFS_SWAP((s)->fragment, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 224, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 256, 64);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_dir_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 128, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 147, 13);\ -+ SQUASHFS_SWAP((s)->start_block, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_ldir_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 128, 27);\ -+ SQUASHFS_SWAP((s)->offset, d, 155, 13);\ -+ SQUASHFS_SWAP((s)->start_block, d, 168, 32);\ -+ SQUASHFS_SWAP((s)->i_count, d, 200, 16);\ -+ SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\ -+ SQUASHFS_SWAP((s)->index, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->size, d, 64, 8);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\ -+ SQUASHFS_SWAP((s)->count, d, 0, 8);\ -+ SQUASHFS_SWAP((s)->start_block, d, 8, 32);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\ -+ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ -+ SQUASHFS_SWAP((s)->type, d, 13, 3);\ -+ SQUASHFS_SWAP((s)->size, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\ -+ SQUASHFS_SWAP((s)->start_block, d, 0, 64);\ -+ SQUASHFS_SWAP((s)->size, d, 64, 32);\ -+} -+ -+#define SQUASHFS_SWAP_SHORTS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 2);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 16)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 16);\ -+} -+ -+#define SQUASHFS_SWAP_INTS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 4);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 32)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 8);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 64)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 64);\ -+} -+ -+#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * bits / 8);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ bits)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, bits);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n) -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+ -+struct squashfs_base_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int type:4; -+ unsigned int offset:4; -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int mtime; -+ unsigned int start_block; -+ unsigned int file_size:32; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 4);\ -+ SQUASHFS_SWAP((s)->guid, d, 20, 4); -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_ipc_inode_header_1));\ -+ SQUASHFS_SWAP((s)->type, d, 24, 4);\ -+ SQUASHFS_SWAP((s)->offset, d, 28, 4);\ -+} -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_dev_inode_header_1));\ -+ SQUASHFS_SWAP((s)->rdev, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header_1));\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_reg_inode_header_1));\ -+ SQUASHFS_SWAP((s)->mtime, d, 24, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 56, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 88, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_dir_inode_header_1));\ -+ SQUASHFS_SWAP((s)->file_size, d, 24, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 43, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 56, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 88, 24);\ -+} -+ -+#endif -+ -+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+ -+struct squashfs_dir_index_2 { -+ unsigned int index:27; -+ unsigned int start_block:29; -+ unsigned char size; -+ unsigned char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_base_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int mtime; -+ unsigned int start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ unsigned int file_size:32; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+struct squashfs_ldir_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int file_size:27; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+ unsigned int i_count:16; -+ struct squashfs_dir_index_2 index[0]; -+} __attribute__ ((packed)); -+ -+union squashfs_inode_header_2 { -+ struct squashfs_base_inode_header_2 base; -+ struct squashfs_dev_inode_header_2 dev; -+ struct squashfs_symlink_inode_header_2 symlink; -+ struct squashfs_reg_inode_header_2 reg; -+ struct squashfs_dir_inode_header_2 dir; -+ struct squashfs_ldir_inode_header_2 ldir; -+ struct squashfs_ipc_inode_header_2 ipc; -+}; -+ -+struct squashfs_dir_header_2 { -+ unsigned int count:8; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_entry_2 { -+ unsigned int offset:13; -+ unsigned int type:3; -+ unsigned int size:8; -+ char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_fragment_entry_2 { -+ unsigned int start_block; -+ unsigned int size; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \ -+ SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2)) -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_dev_inode_header_2)); \ -+ SQUASHFS_SWAP((s)->rdev, d, 32, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header_2));\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_reg_inode_header_2));\ -+ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->fragment, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 128, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 160, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_dir_inode_header_2));\ -+ SQUASHFS_SWAP((s)->file_size, d, 32, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 51, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 96, 24);\ -+} -+ -+#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_ldir_inode_header_2));\ -+ SQUASHFS_SWAP((s)->file_size, d, 32, 27);\ -+ SQUASHFS_SWAP((s)->offset, d, 59, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 72, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 104, 24);\ -+ SQUASHFS_SWAP((s)->i_count, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\ -+ SQUASHFS_SWAP((s)->index, d, 0, 27);\ -+ SQUASHFS_SWAP((s)->start_block, d, 27, 29);\ -+ SQUASHFS_SWAP((s)->size, d, 56, 8);\ -+} -+#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\ -+ SQUASHFS_SWAP((s)->count, d, 0, 8);\ -+ SQUASHFS_SWAP((s)->start_block, d, 8, 24);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\ -+ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ -+ SQUASHFS_SWAP((s)->type, d, 13, 3);\ -+ SQUASHFS_SWAP((s)->size, d, 16, 8);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\ -+ SQUASHFS_SWAP((s)->start_block, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->size, d, 32, 32);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n) -+ -+/* fragment and fragment table defines */ -+#define SQUASHFS_FRAGMENT_BYTES_2(A) (A * sizeof(struct squashfs_fragment_entry_2)) -+ -+#define SQUASHFS_FRAGMENT_INDEX_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEXES_2(A) ((SQUASHFS_FRAGMENT_BYTES_2(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A) (SQUASHFS_FRAGMENT_INDEXES_2(A) *\ -+ sizeof(int)) -+ -+#endif -+ -+#ifdef __KERNEL__ -+ -+/* -+ * macros used to swap each structure entry, taking into account -+ * bitfields and different bitfield placing conventions on differing -+ * architectures -+ */ -+ -+#include -+ -+#ifdef __BIG_ENDIAN -+ /* convert from little endian to big endian */ -+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ -+ tbits, b_pos) -+#else -+ /* convert from big endian to little endian */ -+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ -+ tbits, 64 - tbits - b_pos) -+#endif -+ -+#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\ -+ b_pos = pos % 8;\ -+ val = 0;\ -+ s = (unsigned char *)p + (pos / 8);\ -+ d = ((unsigned char *) &val) + 7;\ -+ for(bits = 0; bits < (tbits + b_pos); bits += 8) \ -+ *d-- = *s++;\ -+ value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\ -+} -+ -+#define SQUASHFS_MEMSET(s, d, n) memset(s, 0, n); -+ -+#endif -+#endif -diff -urN linux-2.6.19.old/include/linux/squashfs_fs_i.h linux-2.6.19.dev/include/linux/squashfs_fs_i.h ---- linux-2.6.19.old/include/linux/squashfs_fs_i.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/squashfs_fs_i.h 2006-12-14 03:13:16.000000000 +0100 -@@ -0,0 +1,45 @@ -+#ifndef SQUASHFS_FS_I -+#define SQUASHFS_FS_I -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs_i.h -+ */ -+ -+struct squashfs_inode_info { -+ long long start_block; -+ unsigned int offset; -+ union { -+ struct { -+ long long fragment_start_block; -+ unsigned int fragment_size; -+ unsigned int fragment_offset; -+ long long block_list_start; -+ } s1; -+ struct { -+ long long directory_index_start; -+ unsigned int directory_index_offset; -+ unsigned int directory_index_count; -+ unsigned int parent_inode; -+ } s2; -+ } u; -+ struct inode vfs_inode; -+}; -+#endif -diff -urN linux-2.6.19.old/include/linux/squashfs_fs_sb.h linux-2.6.19.dev/include/linux/squashfs_fs_sb.h ---- linux-2.6.19.old/include/linux/squashfs_fs_sb.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/squashfs_fs_sb.h 2006-12-14 03:13:16.000000000 +0100 -@@ -0,0 +1,74 @@ -+#ifndef SQUASHFS_FS_SB -+#define SQUASHFS_FS_SB -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs_sb.h -+ */ -+ -+#include -+ -+struct squashfs_cache { -+ long long block; -+ int length; -+ long long next_index; -+ char *data; -+}; -+ -+struct squashfs_fragment_cache { -+ long long block; -+ int length; -+ unsigned int locked; -+ char *data; -+}; -+ -+struct squashfs_sb_info { -+ struct squashfs_super_block sblk; -+ int devblksize; -+ int devblksize_log2; -+ int swap; -+ struct squashfs_cache *block_cache; -+ struct squashfs_fragment_cache *fragment; -+ int next_cache; -+ int next_fragment; -+ int next_meta_index; -+ unsigned int *uid; -+ unsigned int *guid; -+ long long *fragment_index; -+ unsigned int *fragment_index_2; -+ unsigned int read_size; -+ char *read_data; -+ char *read_page; -+ struct semaphore read_data_mutex; -+ struct semaphore read_page_mutex; -+ struct semaphore block_cache_mutex; -+ struct semaphore fragment_mutex; -+ struct semaphore meta_index_mutex; -+ wait_queue_head_t waitq; -+ wait_queue_head_t fragment_wait_queue; -+ struct meta_index *meta_index; -+ struct inode *(*iget)(struct super_block *s, squashfs_inode_t \ -+ inode); -+ long long (*read_blocklist)(struct inode *inode, int \ -+ index, int readahead_blks, char *block_list, \ -+ unsigned short **block_p, unsigned int *bsize); -+ int (*read_fragment_index_table)(struct super_block *s); -+}; -+#endif -diff -urN linux-2.6.19.old/init/do_mounts_rd.c linux-2.6.19.dev/init/do_mounts_rd.c ---- linux-2.6.19.old/init/do_mounts_rd.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/init/do_mounts_rd.c 2006-12-14 03:13:16.000000000 +0100 -@@ -5,6 +5,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -39,6 +40,7 @@ - * numbers could not be found. - * - * We currently check for the following magic numbers: -+ * squashfs - * minix - * ext2 - * romfs -@@ -53,6 +55,7 @@ - struct ext2_super_block *ext2sb; - struct romfs_super_block *romfsb; - struct cramfs_super *cramfsb; -+ struct squashfs_super_block *squashfsb; - int nblocks = -1; - unsigned char *buf; - -@@ -64,6 +67,7 @@ - ext2sb = (struct ext2_super_block *) buf; - romfsb = (struct romfs_super_block *) buf; - cramfsb = (struct cramfs_super *) buf; -+ squashfsb = (struct squashfs_super_block *) buf; - memset(buf, 0xe5, size); - - /* -@@ -101,6 +105,15 @@ - goto done; - } - -+ /* squashfs is at block zero too */ -+ if (squashfsb->s_magic == SQUASHFS_MAGIC) { -+ printk(KERN_NOTICE -+ "RAMDISK: squashfs filesystem found at block %d\n", -+ start_block); -+ nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; -+ goto done; -+ } -+ - /* - * Read block 1 to test for minix and ext2 superblock - */ diff --git a/target/linux/etrax/patches/generic_2.6/002-lzma_decompress.patch b/target/linux/etrax/patches/generic_2.6/002-lzma_decompress.patch deleted file mode 100644 index ca9767729c..0000000000 --- a/target/linux/etrax/patches/generic_2.6/002-lzma_decompress.patch +++ /dev/null @@ -1,780 +0,0 @@ ---- linux-2.6.19.old/lib/Makefile 2007-04-18 17:41:22.679403384 +0200 -+++ linux-2.6.19.dev/lib/Makefile 2007-04-18 17:41:43.303268080 +0200 -@@ -54,6 +54,7 @@ - obj-$(CONFIG_AUDIT_GENERIC) += audit.o - - obj-$(CONFIG_SWIOTLB) += swiotlb.o -+obj-y += LzmaDecode.o - - hostprogs-y := gen_crc32table - clean-files := crc32table.h ---- linux-2.6.19.old/lib/LzmaDecode.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/lib/LzmaDecode.c 2006-12-14 03:13:20.000000000 +0100 -@@ -0,0 +1,663 @@ -+/* -+ LzmaDecode.c -+ LZMA Decoder -+ -+ LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) -+ http://www.7-zip.org/ -+ -+ LZMA SDK is licensed under two licenses: -+ 1) GNU Lesser General Public License (GNU LGPL) -+ 2) Common Public License (CPL) -+ It means that you can select one of these two licenses and -+ follow rules of that license. -+ -+ SPECIAL EXCEPTION: -+ Igor Pavlov, as the author of this code, expressly permits you to -+ statically or dynamically link your code (or bind by name) to the -+ interfaces of this file without subjecting your linked code to the -+ terms of the CPL or GNU LGPL. Any modifications or additions -+ to this file, however, are subject to the LGPL or CPL terms. -+*/ -+ -+#include -+ -+#ifndef Byte -+#define Byte unsigned char -+#endif -+ -+#define kNumTopBits 24 -+#define kTopValue ((UInt32)1 << kNumTopBits) -+ -+#define kNumBitModelTotalBits 11 -+#define kBitModelTotal (1 << kNumBitModelTotalBits) -+#define kNumMoveBits 5 -+ -+typedef struct _CRangeDecoder -+{ -+ Byte *Buffer; -+ Byte *BufferLim; -+ UInt32 Range; -+ UInt32 Code; -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *InCallback; -+ int Result; -+ #endif -+ int ExtraBytes; -+} CRangeDecoder; -+ -+Byte RangeDecoderReadByte(CRangeDecoder *rd) -+{ -+ if (rd->Buffer == rd->BufferLim) -+ { -+ #ifdef _LZMA_IN_CB -+ UInt32 size; -+ rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size); -+ rd->BufferLim = rd->Buffer + size; -+ if (size == 0) -+ #endif -+ { -+ rd->ExtraBytes = 1; -+ return 0xFF; -+ } -+ } -+ return (*rd->Buffer++); -+} -+ -+/* #define ReadByte (*rd->Buffer++) */ -+#define ReadByte (RangeDecoderReadByte(rd)) -+ -+void RangeDecoderInit(CRangeDecoder *rd, -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *inCallback -+ #else -+ Byte *stream, UInt32 bufferSize -+ #endif -+ ) -+{ -+ int i; -+ #ifdef _LZMA_IN_CB -+ rd->InCallback = inCallback; -+ rd->Buffer = rd->BufferLim = 0; -+ #else -+ rd->Buffer = stream; -+ rd->BufferLim = stream + bufferSize; -+ #endif -+ rd->ExtraBytes = 0; -+ rd->Code = 0; -+ rd->Range = (0xFFFFFFFF); -+ for(i = 0; i < 5; i++) -+ rd->Code = (rd->Code << 8) | ReadByte; -+} -+ -+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code; -+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code; -+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; } -+ -+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits) -+{ -+ RC_INIT_VAR -+ UInt32 result = 0; -+ int i; -+ for (i = numTotalBits; i > 0; i--) -+ { -+ /* UInt32 t; */ -+ range >>= 1; -+ -+ result <<= 1; -+ if (code >= range) -+ { -+ code -= range; -+ result |= 1; -+ } -+ /* -+ t = (code - range) >> 31; -+ t &= 1; -+ code -= range & (t - 1); -+ result = (result + result) | (1 - t); -+ */ -+ RC_NORMALIZE -+ } -+ RC_FLUSH_VAR -+ return result; -+} -+ -+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd) -+{ -+ UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob; -+ if (rd->Code < bound) -+ { -+ rd->Range = bound; -+ *prob += (kBitModelTotal - *prob) >> kNumMoveBits; -+ if (rd->Range < kTopValue) -+ { -+ rd->Code = (rd->Code << 8) | ReadByte; -+ rd->Range <<= 8; -+ } -+ return 0; -+ } -+ else -+ { -+ rd->Range -= bound; -+ rd->Code -= bound; -+ *prob -= (*prob) >> kNumMoveBits; -+ if (rd->Range < kTopValue) -+ { -+ rd->Code = (rd->Code << 8) | ReadByte; -+ rd->Range <<= 8; -+ } -+ return 1; -+ } -+} -+ -+#define RC_GET_BIT2(prob, mi, A0, A1) \ -+ UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \ -+ if (code < bound) \ -+ { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \ -+ else \ -+ { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \ -+ RC_NORMALIZE -+ -+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;) -+ -+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -+{ -+ int mi = 1; -+ int i; -+ #ifdef _LZMA_LOC_OPT -+ RC_INIT_VAR -+ #endif -+ for(i = numLevels; i > 0; i--) -+ { -+ #ifdef _LZMA_LOC_OPT -+ CProb *prob = probs + mi; -+ RC_GET_BIT(prob, mi) -+ #else -+ mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd); -+ #endif -+ } -+ #ifdef _LZMA_LOC_OPT -+ RC_FLUSH_VAR -+ #endif -+ return mi - (1 << numLevels); -+} -+ -+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -+{ -+ int mi = 1; -+ int i; -+ int symbol = 0; -+ #ifdef _LZMA_LOC_OPT -+ RC_INIT_VAR -+ #endif -+ for(i = 0; i < numLevels; i++) -+ { -+ #ifdef _LZMA_LOC_OPT -+ CProb *prob = probs + mi; -+ RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i)) -+ #else -+ int bit = RangeDecoderBitDecode(probs + mi, rd); -+ mi = mi + mi + bit; -+ symbol |= (bit << i); -+ #endif -+ } -+ #ifdef _LZMA_LOC_OPT -+ RC_FLUSH_VAR -+ #endif -+ return symbol; -+} -+ -+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd) -+{ -+ int symbol = 1; -+ #ifdef _LZMA_LOC_OPT -+ RC_INIT_VAR -+ #endif -+ do -+ { -+ #ifdef _LZMA_LOC_OPT -+ CProb *prob = probs + symbol; -+ RC_GET_BIT(prob, symbol) -+ #else -+ symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); -+ #endif -+ } -+ while (symbol < 0x100); -+ #ifdef _LZMA_LOC_OPT -+ RC_FLUSH_VAR -+ #endif -+ return symbol; -+} -+ -+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte) -+{ -+ int symbol = 1; -+ #ifdef _LZMA_LOC_OPT -+ RC_INIT_VAR -+ #endif -+ do -+ { -+ int bit; -+ int matchBit = (matchByte >> 7) & 1; -+ matchByte <<= 1; -+ #ifdef _LZMA_LOC_OPT -+ { -+ CProb *prob = probs + ((1 + matchBit) << 8) + symbol; -+ RC_GET_BIT2(prob, symbol, bit = 0, bit = 1) -+ } -+ #else -+ bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd); -+ symbol = (symbol << 1) | bit; -+ #endif -+ if (matchBit != bit) -+ { -+ while (symbol < 0x100) -+ { -+ #ifdef _LZMA_LOC_OPT -+ CProb *prob = probs + symbol; -+ RC_GET_BIT(prob, symbol) -+ #else -+ symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); -+ #endif -+ } -+ break; -+ } -+ } -+ while (symbol < 0x100); -+ #ifdef _LZMA_LOC_OPT -+ RC_FLUSH_VAR -+ #endif -+ return symbol; -+} -+ -+#define kNumPosBitsMax 4 -+#define kNumPosStatesMax (1 << kNumPosBitsMax) -+ -+#define kLenNumLowBits 3 -+#define kLenNumLowSymbols (1 << kLenNumLowBits) -+#define kLenNumMidBits 3 -+#define kLenNumMidSymbols (1 << kLenNumMidBits) -+#define kLenNumHighBits 8 -+#define kLenNumHighSymbols (1 << kLenNumHighBits) -+ -+#define LenChoice 0 -+#define LenChoice2 (LenChoice + 1) -+#define LenLow (LenChoice2 + 1) -+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) -+ -+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState) -+{ -+ if(RangeDecoderBitDecode(p + LenChoice, rd) == 0) -+ return RangeDecoderBitTreeDecode(p + LenLow + -+ (posState << kLenNumLowBits), kLenNumLowBits, rd); -+ if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0) -+ return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid + -+ (posState << kLenNumMidBits), kLenNumMidBits, rd); -+ return kLenNumLowSymbols + kLenNumMidSymbols + -+ RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd); -+} -+ -+#define kNumStates 12 -+ -+#define kStartPosModelIndex 4 -+#define kEndPosModelIndex 14 -+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) -+ -+#define kNumPosSlotBits 6 -+#define kNumLenToPosStates 4 -+ -+#define kNumAlignBits 4 -+#define kAlignTableSize (1 << kNumAlignBits) -+ -+#define kMatchMinLen 2 -+ -+#define IsMatch 0 -+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -+#define IsRepG0 (IsRep + kNumStates) -+#define IsRepG1 (IsRepG0 + kNumStates) -+#define IsRepG2 (IsRepG1 + kNumStates) -+#define IsRep0Long (IsRepG2 + kNumStates) -+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -+#define LenCoder (Align + kAlignTableSize) -+#define RepLenCoder (LenCoder + kNumLenProbs) -+#define Literal (RepLenCoder + kNumLenProbs) -+ -+#if Literal != LZMA_BASE_SIZE -+StopCompilingDueBUG -+#endif -+ -+#ifdef _LZMA_OUT_READ -+ -+typedef struct _LzmaVarState -+{ -+ CRangeDecoder RangeDecoder; -+ Byte *Dictionary; -+ UInt32 DictionarySize; -+ UInt32 DictionaryPos; -+ UInt32 GlobalPos; -+ UInt32 Reps[4]; -+ int lc; -+ int lp; -+ int pb; -+ int State; -+ int PreviousIsMatch; -+ int RemainLen; -+} LzmaVarState; -+ -+int LzmaDecoderInit( -+ unsigned char *buffer, UInt32 bufferSize, -+ int lc, int lp, int pb, -+ unsigned char *dictionary, UInt32 dictionarySize, -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *inCallback -+ #else -+ unsigned char *inStream, UInt32 inSize -+ #endif -+ ) -+{ -+ LzmaVarState *vs = (LzmaVarState *)buffer; -+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); -+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); -+ UInt32 i; -+ if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) -+ return LZMA_RESULT_NOT_ENOUGH_MEM; -+ vs->Dictionary = dictionary; -+ vs->DictionarySize = dictionarySize; -+ vs->DictionaryPos = 0; -+ vs->GlobalPos = 0; -+ vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; -+ vs->lc = lc; -+ vs->lp = lp; -+ vs->pb = pb; -+ vs->State = 0; -+ vs->PreviousIsMatch = 0; -+ vs->RemainLen = 0; -+ dictionary[dictionarySize - 1] = 0; -+ for (i = 0; i < numProbs; i++) -+ p[i] = kBitModelTotal >> 1; -+ RangeDecoderInit(&vs->RangeDecoder, -+ #ifdef _LZMA_IN_CB -+ inCallback -+ #else -+ inStream, inSize -+ #endif -+ ); -+ return LZMA_RESULT_OK; -+} -+ -+int LzmaDecode(unsigned char *buffer, -+ unsigned char *outStream, UInt32 outSize, -+ UInt32 *outSizeProcessed) -+{ -+ LzmaVarState *vs = (LzmaVarState *)buffer; -+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); -+ CRangeDecoder rd = vs->RangeDecoder; -+ int state = vs->State; -+ int previousIsMatch = vs->PreviousIsMatch; -+ Byte previousByte; -+ UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; -+ UInt32 nowPos = 0; -+ UInt32 posStateMask = (1 << (vs->pb)) - 1; -+ UInt32 literalPosMask = (1 << (vs->lp)) - 1; -+ int lc = vs->lc; -+ int len = vs->RemainLen; -+ UInt32 globalPos = vs->GlobalPos; -+ -+ Byte *dictionary = vs->Dictionary; -+ UInt32 dictionarySize = vs->DictionarySize; -+ UInt32 dictionaryPos = vs->DictionaryPos; -+ -+ if (len == -1) -+ { -+ *outSizeProcessed = 0; -+ return LZMA_RESULT_OK; -+ } -+ -+ while(len > 0 && nowPos < outSize) -+ { -+ UInt32 pos = dictionaryPos - rep0; -+ if (pos >= dictionarySize) -+ pos += dictionarySize; -+ outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; -+ if (++dictionaryPos == dictionarySize) -+ dictionaryPos = 0; -+ len--; -+ } -+ if (dictionaryPos == 0) -+ previousByte = dictionary[dictionarySize - 1]; -+ else -+ previousByte = dictionary[dictionaryPos - 1]; -+#else -+ -+int LzmaDecode( -+ Byte *buffer, UInt32 bufferSize, -+ int lc, int lp, int pb, -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *inCallback, -+ #else -+ unsigned char *inStream, UInt32 inSize, -+ #endif -+ unsigned char *outStream, UInt32 outSize, -+ UInt32 *outSizeProcessed) -+{ -+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); -+ CProb *p = (CProb *)buffer; -+ CRangeDecoder rd; -+ UInt32 i; -+ int state = 0; -+ int previousIsMatch = 0; -+ Byte previousByte = 0; -+ UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; -+ UInt32 nowPos = 0; -+ UInt32 posStateMask = (1 << pb) - 1; -+ UInt32 literalPosMask = (1 << lp) - 1; -+ int len = 0; -+ if (bufferSize < numProbs * sizeof(CProb)) -+ return LZMA_RESULT_NOT_ENOUGH_MEM; -+ for (i = 0; i < numProbs; i++) -+ p[i] = kBitModelTotal >> 1; -+ RangeDecoderInit(&rd, -+ #ifdef _LZMA_IN_CB -+ inCallback -+ #else -+ inStream, inSize -+ #endif -+ ); -+#endif -+ -+ *outSizeProcessed = 0; -+ while(nowPos < outSize) -+ { -+ int posState = (int)( -+ (nowPos -+ #ifdef _LZMA_OUT_READ -+ + globalPos -+ #endif -+ ) -+ & posStateMask); -+ #ifdef _LZMA_IN_CB -+ if (rd.Result != LZMA_RESULT_OK) -+ return rd.Result; -+ #endif -+ if (rd.ExtraBytes != 0) -+ return LZMA_RESULT_DATA_ERROR; -+ if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0) -+ { -+ CProb *probs = p + Literal + (LZMA_LIT_SIZE * -+ ((( -+ (nowPos -+ #ifdef _LZMA_OUT_READ -+ + globalPos -+ #endif -+ ) -+ & literalPosMask) << lc) + (previousByte >> (8 - lc)))); -+ -+ if (state < 4) state = 0; -+ else if (state < 10) state -= 3; -+ else state -= 6; -+ if (previousIsMatch) -+ { -+ Byte matchByte; -+ #ifdef _LZMA_OUT_READ -+ UInt32 pos = dictionaryPos - rep0; -+ if (pos >= dictionarySize) -+ pos += dictionarySize; -+ matchByte = dictionary[pos]; -+ #else -+ matchByte = outStream[nowPos - rep0]; -+ #endif -+ previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte); -+ previousIsMatch = 0; -+ } -+ else -+ previousByte = LzmaLiteralDecode(probs, &rd); -+ outStream[nowPos++] = previousByte; -+ #ifdef _LZMA_OUT_READ -+ dictionary[dictionaryPos] = previousByte; -+ if (++dictionaryPos == dictionarySize) -+ dictionaryPos = 0; -+ #endif -+ } -+ else -+ { -+ previousIsMatch = 1; -+ if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1) -+ { -+ if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0) -+ { -+ if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0) -+ { -+ #ifdef _LZMA_OUT_READ -+ UInt32 pos; -+ #endif -+ if ( -+ (nowPos -+ #ifdef _LZMA_OUT_READ -+ + globalPos -+ #endif -+ ) -+ == 0) -+ return LZMA_RESULT_DATA_ERROR; -+ state = state < 7 ? 9 : 11; -+ #ifdef _LZMA_OUT_READ -+ pos = dictionaryPos - rep0; -+ if (pos >= dictionarySize) -+ pos += dictionarySize; -+ previousByte = dictionary[pos]; -+ dictionary[dictionaryPos] = previousByte; -+ if (++dictionaryPos == dictionarySize) -+ dictionaryPos = 0; -+ #else -+ previousByte = outStream[nowPos - rep0]; -+ #endif -+ outStream[nowPos++] = previousByte; -+ continue; -+ } -+ } -+ else -+ { -+ UInt32 distance; -+ if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0) -+ distance = rep1; -+ else -+ { -+ if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0) -+ distance = rep2; -+ else -+ { -+ distance = rep3; -+ rep3 = rep2; -+ } -+ rep2 = rep1; -+ } -+ rep1 = rep0; -+ rep0 = distance; -+ } -+ len = LzmaLenDecode(p + RepLenCoder, &rd, posState); -+ state = state < 7 ? 8 : 11; -+ } -+ else -+ { -+ int posSlot; -+ rep3 = rep2; -+ rep2 = rep1; -+ rep1 = rep0; -+ state = state < 7 ? 7 : 10; -+ len = LzmaLenDecode(p + LenCoder, &rd, posState); -+ posSlot = RangeDecoderBitTreeDecode(p + PosSlot + -+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << -+ kNumPosSlotBits), kNumPosSlotBits, &rd); -+ if (posSlot >= kStartPosModelIndex) -+ { -+ int numDirectBits = ((posSlot >> 1) - 1); -+ rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits); -+ if (posSlot < kEndPosModelIndex) -+ { -+ rep0 += RangeDecoderReverseBitTreeDecode( -+ p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd); -+ } -+ else -+ { -+ rep0 += RangeDecoderDecodeDirectBits(&rd, -+ numDirectBits - kNumAlignBits) << kNumAlignBits; -+ rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd); -+ } -+ } -+ else -+ rep0 = posSlot; -+ rep0++; -+ } -+ if (rep0 == (UInt32)(0)) -+ { -+ /* it's for stream version */ -+ len = -1; -+ break; -+ } -+ if (rep0 > nowPos -+ #ifdef _LZMA_OUT_READ -+ + globalPos -+ #endif -+ ) -+ { -+ return LZMA_RESULT_DATA_ERROR; -+ } -+ len += kMatchMinLen; -+ do -+ { -+ #ifdef _LZMA_OUT_READ -+ UInt32 pos = dictionaryPos - rep0; -+ if (pos >= dictionarySize) -+ pos += dictionarySize; -+ previousByte = dictionary[pos]; -+ dictionary[dictionaryPos] = previousByte; -+ if (++dictionaryPos == dictionarySize) -+ dictionaryPos = 0; -+ #else -+ previousByte = outStream[nowPos - rep0]; -+ #endif -+ outStream[nowPos++] = previousByte; -+ len--; -+ } -+ while(len > 0 && nowPos < outSize); -+ } -+ } -+ -+ #ifdef _LZMA_OUT_READ -+ vs->RangeDecoder = rd; -+ vs->DictionaryPos = dictionaryPos; -+ vs->GlobalPos = globalPos + nowPos; -+ vs->Reps[0] = rep0; -+ vs->Reps[1] = rep1; -+ vs->Reps[2] = rep2; -+ vs->Reps[3] = rep3; -+ vs->State = state; -+ vs->PreviousIsMatch = previousIsMatch; -+ vs->RemainLen = len; -+ #endif -+ -+ *outSizeProcessed = nowPos; -+ return LZMA_RESULT_OK; -+} ---- linux-2.6.19.old/include/linux/LzmaDecode.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/LzmaDecode.h 2006-12-14 03:13:20.000000000 +0100 -@@ -0,0 +1,100 @@ -+/* -+ LzmaDecode.h -+ LZMA Decoder interface -+ -+ LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) -+ http://www.7-zip.org/ -+ -+ LZMA SDK is licensed under two licenses: -+ 1) GNU Lesser General Public License (GNU LGPL) -+ 2) Common Public License (CPL) -+ It means that you can select one of these two licenses and -+ follow rules of that license. -+ -+ SPECIAL EXCEPTION: -+ Igor Pavlov, as the author of this code, expressly permits you to -+ statically or dynamically link your code (or bind by name) to the -+ interfaces of this file without subjecting your linked code to the -+ terms of the CPL or GNU LGPL. Any modifications or additions -+ to this file, however, are subject to the LGPL or CPL terms. -+*/ -+ -+#ifndef __LZMADECODE_H -+#define __LZMADECODE_H -+ -+/* #define _LZMA_IN_CB */ -+/* Use callback for input data */ -+ -+/* #define _LZMA_OUT_READ */ -+/* Use read function for output data */ -+ -+/* #define _LZMA_PROB32 */ -+/* It can increase speed on some 32-bit CPUs, -+ but memory usage will be doubled in that case */ -+ -+/* #define _LZMA_LOC_OPT */ -+/* Enable local speed optimizations inside code */ -+ -+#ifndef UInt32 -+#ifdef _LZMA_UINT32_IS_ULONG -+#define UInt32 unsigned long -+#else -+#define UInt32 unsigned int -+#endif -+#endif -+ -+#ifdef _LZMA_PROB32 -+#define CProb UInt32 -+#else -+#define CProb unsigned short -+#endif -+ -+#define LZMA_RESULT_OK 0 -+#define LZMA_RESULT_DATA_ERROR 1 -+#define LZMA_RESULT_NOT_ENOUGH_MEM 2 -+ -+#ifdef _LZMA_IN_CB -+typedef struct _ILzmaInCallback -+{ -+ int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); -+} ILzmaInCallback; -+#endif -+ -+#define LZMA_BASE_SIZE 1846 -+#define LZMA_LIT_SIZE 768 -+ -+/* -+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) -+bufferSize += 100 in case of _LZMA_OUT_READ -+by default CProb is unsigned short, -+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) -+*/ -+ -+#ifdef _LZMA_OUT_READ -+int LzmaDecoderInit( -+ unsigned char *buffer, UInt32 bufferSize, -+ int lc, int lp, int pb, -+ unsigned char *dictionary, UInt32 dictionarySize, -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *inCallback -+ #else -+ unsigned char *inStream, UInt32 inSize -+ #endif -+); -+#endif -+ -+int LzmaDecode( -+ unsigned char *buffer, -+ #ifndef _LZMA_OUT_READ -+ UInt32 bufferSize, -+ int lc, int lp, int pb, -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *inCallback, -+ #else -+ unsigned char *inStream, UInt32 inSize, -+ #endif -+ #endif -+ unsigned char *outStream, UInt32 outSize, -+ UInt32 *outSizeProcessed); -+ -+#endif - diff --git a/target/linux/etrax/patches/generic_2.6/003-squashfs_lzma.patch b/target/linux/etrax/patches/generic_2.6/003-squashfs_lzma.patch deleted file mode 100644 index 6a21227dcb..0000000000 --- a/target/linux/etrax/patches/generic_2.6/003-squashfs_lzma.patch +++ /dev/null @@ -1,109 +0,0 @@ -diff -urN linux-2.6.19.old/fs/squashfs/inode.c linux-2.6.19.dev/fs/squashfs/inode.c ---- linux-2.6.19.old/fs/squashfs/inode.c 2006-12-14 03:13:20.000000000 +0100 -+++ linux-2.6.19.dev/fs/squashfs/inode.c 2006-12-14 03:13:20.000000000 +0100 -@@ -4,6 +4,9 @@ - * Copyright (c) 2002, 2003, 2004, 2005, 2006 - * Phillip Lougher - * -+ * LZMA decompressor support added by Oleg I. Vdovikin -+ * Copyright (c) 2005 Oleg I.Vdovikin -+ * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2, -@@ -21,6 +24,7 @@ - * inode.c - */ - -+#define SQUASHFS_LZMA - #include - #include - #include -@@ -44,6 +48,19 @@ - - #include "squashfs.h" - -+#ifdef SQUASHFS_LZMA -+#include -+ -+/* default LZMA settings, should be in sync with mksquashfs */ -+#define LZMA_LC 3 -+#define LZMA_LP 0 -+#define LZMA_PB 2 -+ -+#define LZMA_WORKSPACE_SIZE ((LZMA_BASE_SIZE + \ -+ (LZMA_LIT_SIZE << (LZMA_LC + LZMA_LP))) * sizeof(CProb)) -+ -+#endif -+ - static void squashfs_put_super(struct super_block *); - static int squashfs_statfs(struct dentry *, struct kstatfs *); - static int squashfs_symlink_readpage(struct file *file, struct page *page); -@@ -64,7 +81,11 @@ - const char *, void *, struct vfsmount *); - - -+#ifdef SQUASHFS_LZMA -+static unsigned char lzma_workspace[LZMA_WORKSPACE_SIZE]; -+#else - static z_stream stream; -+#endif - - static struct file_system_type squashfs_fs_type = { - .owner = THIS_MODULE, -@@ -249,6 +270,15 @@ - if (compressed) { - int zlib_err; - -+#ifdef SQUASHFS_LZMA -+ if ((zlib_err = LzmaDecode(lzma_workspace, -+ LZMA_WORKSPACE_SIZE, LZMA_LC, LZMA_LP, LZMA_PB, -+ c_buffer, c_byte, buffer, msblk->read_size, &bytes)) != LZMA_RESULT_OK) -+ { -+ ERROR("lzma returned unexpected result 0x%x\n", zlib_err); -+ bytes = 0; -+ } -+#else - stream.next_in = c_buffer; - stream.avail_in = c_byte; - stream.next_out = buffer; -@@ -263,7 +293,7 @@ - bytes = 0; - } else - bytes = stream.total_out; -- -+#endif - up(&msblk->read_data_mutex); - } - -@@ -2045,15 +2075,19 @@ - printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) " - "Phillip Lougher\n"); - -+#ifndef SQUASHFS_LZMA - if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) { - ERROR("Failed to allocate zlib workspace\n"); - destroy_inodecache(); - err = -ENOMEM; - goto out; - } -+#endif - - if ((err = register_filesystem(&squashfs_fs_type))) { -+#ifndef SQUASHFS_LZMA - vfree(stream.workspace); -+#endif - destroy_inodecache(); - } - -@@ -2064,7 +2098,9 @@ - - static void __exit exit_squashfs_fs(void) - { -+#ifndef SQUASHFS_LZMA - vfree(stream.workspace); -+#endif - unregister_filesystem(&squashfs_fs_type); - destroy_inodecache(); - } - diff --git a/target/linux/etrax/patches/generic_2.6/004-extra_optimization.patch b/target/linux/etrax/patches/generic_2.6/004-extra_optimization.patch deleted file mode 100644 index 3a8dfdcd00..0000000000 --- a/target/linux/etrax/patches/generic_2.6/004-extra_optimization.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff -urN linux-2.6.19.old/Makefile linux-2.6.19.dev/Makefile ---- linux-2.6.19.old/Makefile 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/Makefile 2006-12-14 03:13:23.000000000 +0100 -@@ -513,6 +513,9 @@ - NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) - CHECKFLAGS += $(NOSTDINC_FLAGS) - -+# improve gcc optimization -+CFLAGS += $(call cc-option,-funit-at-a-time,) -+ - # warn about C99 declaration after statement - CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) - diff --git a/target/linux/etrax/patches/generic_2.6/006-gcc4_inline_fix.patch b/target/linux/etrax/patches/generic_2.6/006-gcc4_inline_fix.patch deleted file mode 100644 index 32d0bc4713..0000000000 --- a/target/linux/etrax/patches/generic_2.6/006-gcc4_inline_fix.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -urN linux-2.6.19.old/include/asm-mips/system.h linux-2.6.19.dev/include/asm-mips/system.h ---- linux-2.6.19.old/include/asm-mips/system.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/asm-mips/system.h 2006-12-14 03:13:28.000000000 +0100 -@@ -311,7 +311,7 @@ - if something tries to do an invalid xchg(). */ - extern void __xchg_called_with_bad_pointer(void); - --static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -+static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) - { - switch (size) { - case 4: diff --git a/target/linux/etrax/patches/generic_2.6/007-samsung_flash.patch b/target/linux/etrax/patches/generic_2.6/007-samsung_flash.patch deleted file mode 100644 index e48fe04b0d..0000000000 --- a/target/linux/etrax/patches/generic_2.6/007-samsung_flash.patch +++ /dev/null @@ -1,37 +0,0 @@ -diff -urN linux-2.6.19.old/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.6.19.dev/drivers/mtd/chips/cfi_cmdset_0002.c ---- linux-2.6.19.old/drivers/mtd/chips/cfi_cmdset_0002.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/drivers/mtd/chips/cfi_cmdset_0002.c 2006-12-14 03:13:30.000000000 +0100 -@@ -50,6 +50,7 @@ - #define SST49LF004B 0x0060 - #define SST49LF008A 0x005a - #define AT49BV6416 0x00d6 -+#define MANUFACTURER_SAMSUNG 0x00ec - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -293,12 +294,19 @@ - - if (extp->MajorVersion != '1' || - (extp->MinorVersion < '0' || extp->MinorVersion > '4')) { -- printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query " -- "version %c.%c.\n", extp->MajorVersion, -- extp->MinorVersion); -- kfree(extp); -- kfree(mtd); -- return NULL; -+ if (cfi->mfr == MANUFACTURER_SAMSUNG && -+ (extp->MajorVersion == '3' && extp->MinorVersion == '3')) { -+ printk(KERN_NOTICE " Newer Samsung flash detected, " -+ "should be compatibile with Amd/Fujitsu.\n"); -+ } -+ else { -+ printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query " -+ "version %c.%c.\n", extp->MajorVersion, -+ extp->MinorVersion); -+ kfree(extp); -+ kfree(mtd); -+ return NULL; -+ } - } - - /* Install our own private info structure */ diff --git a/target/linux/etrax/patches/generic_2.6/009-revert_intel_flash_breakage.patch b/target/linux/etrax/patches/generic_2.6/009-revert_intel_flash_breakage.patch deleted file mode 100644 index ea06360c48..0000000000 --- a/target/linux/etrax/patches/generic_2.6/009-revert_intel_flash_breakage.patch +++ /dev/null @@ -1,169 +0,0 @@ ---- linux.old/drivers/mtd/chips/cfi_cmdset_0001.c 2007-02-13 02:41:50.816650352 +0100 -+++ linux.dev/drivers/mtd/chips/cfi_cmdset_0001.c 2007-02-13 02:42:13.782159064 +0100 -@@ -908,7 +908,7 @@ - - static int __xipram xip_wait_for_operation( - struct map_info *map, struct flchip *chip, -- unsigned long adr, unsigned int chip_op_time ) -+ unsigned long adr, int *chip_op_time ) - { - struct cfi_private *cfi = map->fldrv_priv; - struct cfi_pri_intelext *cfip = cfi->cmdset_priv; -@@ -917,7 +917,7 @@ - flstate_t oldstate, newstate; - - start = xip_currtime(); -- usec = chip_op_time * 8; -+ usec = *chip_op_time * 8; - if (usec == 0) - usec = 500000; - done = 0; -@@ -1027,8 +1027,8 @@ - #define XIP_INVAL_CACHED_RANGE(map, from, size) \ - INVALIDATE_CACHED_RANGE(map, from, size) - --#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, usec) \ -- xip_wait_for_operation(map, chip, cmd_adr, usec) -+#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, p_usec) \ -+ xip_wait_for_operation(map, chip, cmd_adr, p_usec) - - #else - -@@ -1040,65 +1040,65 @@ - static int inval_cache_and_wait_for_operation( - struct map_info *map, struct flchip *chip, - unsigned long cmd_adr, unsigned long inval_adr, int inval_len, -- unsigned int chip_op_time) -+ int *chip_op_time ) - { - struct cfi_private *cfi = map->fldrv_priv; - map_word status, status_OK = CMD(0x80); -- int chip_state = chip->state; -- unsigned int timeo, sleep_time; -+ int z, chip_state = chip->state; -+ unsigned long timeo; - - spin_unlock(chip->mutex); - if (inval_len) - INVALIDATE_CACHED_RANGE(map, inval_adr, inval_len); -+ if (*chip_op_time) -+ cfi_udelay(*chip_op_time); - spin_lock(chip->mutex); - -- /* set our timeout to 8 times the expected delay */ -- timeo = chip_op_time * 8; -- if (!timeo) -- timeo = 500000; -- sleep_time = chip_op_time / 2; -+ timeo = *chip_op_time * 8 * HZ / 1000000; -+ if (timeo < HZ/2) -+ timeo = HZ/2; -+ timeo += jiffies; - -+ z = 0; - for (;;) { -+ if (chip->state != chip_state) { -+ /* Someone's suspended the operation: sleep */ -+ DECLARE_WAITQUEUE(wait, current); -+ -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ add_wait_queue(&chip->wq, &wait); -+ spin_unlock(chip->mutex); -+ schedule(); -+ remove_wait_queue(&chip->wq, &wait); -+ timeo = jiffies + (HZ / 2); /* FIXME */ -+ spin_lock(chip->mutex); -+ continue; -+ } -+ - status = map_read(map, cmd_adr); - if (map_word_andequal(map, status, status_OK, status_OK)) - break; - -- if (!timeo) { -+ /* OK Still waiting */ -+ if (time_after(jiffies, timeo)) { - map_write(map, CMD(0x70), cmd_adr); - chip->state = FL_STATUS; - return -ETIME; - } - -- /* OK Still waiting. Drop the lock, wait a while and retry. */ -+ /* Latency issues. Drop the lock, wait a while and retry */ -+ z++; - spin_unlock(chip->mutex); -- if (sleep_time >= 1000000/HZ) { -- /* -- * Half of the normal delay still remaining -- * can be performed with a sleeping delay instead -- * of busy waiting. -- */ -- msleep(sleep_time/1000); -- timeo -= sleep_time; -- sleep_time = 1000000/HZ; -- } else { -- udelay(1); -- cond_resched(); -- timeo--; -- } -+ cfi_udelay(1); - spin_lock(chip->mutex); -- -- while (chip->state != chip_state) { -- /* Someone's suspended the operation: sleep */ -- DECLARE_WAITQUEUE(wait, current); -- set_current_state(TASK_UNINTERRUPTIBLE); -- add_wait_queue(&chip->wq, &wait); -- spin_unlock(chip->mutex); -- schedule(); -- remove_wait_queue(&chip->wq, &wait); -- spin_lock(chip->mutex); -- } - } - -+ if (!z) { -+ if (!--(*chip_op_time)) -+ *chip_op_time = 1; -+ } else if (z > 1) -+ ++(*chip_op_time); -+ - /* Done and happy. */ - chip->state = FL_STATUS; - return 0; -@@ -1107,7 +1107,8 @@ - #endif - - #define WAIT_TIMEOUT(map, chip, adr, udelay) \ -- INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, udelay); -+ ({ int __udelay = (udelay); \ -+ INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, &__udelay); }) - - - static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len) -@@ -1331,7 +1332,7 @@ - - ret = INVAL_CACHE_AND_WAIT(map, chip, adr, - adr, map_bankwidth(map), -- chip->word_write_time); -+ &chip->word_write_time); - if (ret) { - xip_enable(map, chip, adr); - printk(KERN_ERR "%s: word write error (status timeout)\n", map->name); -@@ -1568,7 +1569,7 @@ - - ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, - adr, len, -- chip->buffer_write_time); -+ &chip->buffer_write_time); - if (ret) { - map_write(map, CMD(0x70), cmd_adr); - chip->state = FL_STATUS; -@@ -1703,7 +1704,7 @@ - - ret = INVAL_CACHE_AND_WAIT(map, chip, adr, - adr, len, -- chip->erase_time); -+ &chip->erase_time); - if (ret) { - map_write(map, CMD(0x70), adr); - chip->state = FL_STATUS; diff --git a/target/linux/etrax/patches/generic_2.6/010-disable_old_squashfs_compatibility.patch b/target/linux/etrax/patches/generic_2.6/010-disable_old_squashfs_compatibility.patch deleted file mode 100644 index 4d556a4133..0000000000 --- a/target/linux/etrax/patches/generic_2.6/010-disable_old_squashfs_compatibility.patch +++ /dev/null @@ -1,21 +0,0 @@ -diff -urN linux-2.6.19.old/fs/squashfs/Makefile linux-2.6.19.dev/fs/squashfs/Makefile ---- linux-2.6.19.old/fs/squashfs/Makefile 2006-12-14 03:13:22.000000000 +0100 -+++ linux-2.6.19.dev/fs/squashfs/Makefile 2006-12-14 03:13:31.000000000 +0100 -@@ -4,4 +4,3 @@ - - obj-$(CONFIG_SQUASHFS) += squashfs.o - squashfs-y += inode.o --squashfs-y += squashfs2_0.o -diff -urN linux-2.6.19.old/fs/squashfs/squashfs.h linux-2.6.19.dev/fs/squashfs/squashfs.h ---- linux-2.6.19.old/fs/squashfs/squashfs.h 2006-12-14 03:13:20.000000000 +0100 -+++ linux-2.6.19.dev/fs/squashfs/squashfs.h 2006-12-14 03:13:31.000000000 +0100 -@@ -24,6 +24,9 @@ - #ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY - #undef CONFIG_SQUASHFS_1_0_COMPATIBILITY - #endif -+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#undef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#endif - - #ifdef SQUASHFS_TRACE - #define TRACE(s, args...) printk(KERN_NOTICE "SQUASHFS: "s, ## args) diff --git a/target/linux/etrax/patches/generic_2.6/060-rootfs_split.patch b/target/linux/etrax/patches/generic_2.6/060-rootfs_split.patch deleted file mode 100644 index b4a55256bf..0000000000 --- a/target/linux/etrax/patches/generic_2.6/060-rootfs_split.patch +++ /dev/null @@ -1,414 +0,0 @@ -diff -ur linux.old/drivers/mtd/Kconfig linux.dev/drivers/mtd/Kconfig ---- linux.old/drivers/mtd/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux.dev/drivers/mtd/Kconfig 2007-02-19 23:00:53.739457000 +0100 -@@ -49,6 +49,11 @@ - devices. Partitioning on NFTL 'devices' is a different - that's the - 'normal' form of partitioning used on a block device. - -+config MTD_SPLIT_ROOTFS -+ bool "Automatically split rootfs partition for squashfs" -+ depends on MTD_PARTITIONS -+ default y -+ - config MTD_REDBOOT_PARTS - tristate "RedBoot partition table parsing" - depends on MTD_PARTITIONS -diff -ur linux.old/drivers/mtd/mtdpart.c linux.dev/drivers/mtd/mtdpart.c ---- linux.old/drivers/mtd/mtdpart.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux.dev/drivers/mtd/mtdpart.c 2007-02-20 00:01:38.587355896 +0100 -@@ -20,6 +20,8 @@ - #include - #include - #include -+#include -+#include - - /* Our partition linked list */ - static LIST_HEAD(mtd_partitions); -@@ -303,6 +305,173 @@ - return 0; - } - -+static u_int32_t cur_offset = 0; -+static int add_mtd_partition(struct mtd_info *master, const struct mtd_partition *part, int i) -+{ -+ struct mtd_part *slave; -+ -+ /* allocate the partition structure */ -+ slave = kmalloc (sizeof(*slave), GFP_KERNEL); -+ if (!slave) { -+ printk ("memory allocation error while creating partitions for \"%s\"\n", -+ master->name); -+ del_mtd_partitions(master); -+ return -ENOMEM; -+ } -+ memset(slave, 0, sizeof(*slave)); -+ list_add(&slave->list, &mtd_partitions); -+ -+ /* set up the MTD object for this partition */ -+ slave->mtd.type = master->type; -+ slave->mtd.flags = master->flags & ~part->mask_flags; -+ slave->mtd.size = part->size; -+ slave->mtd.writesize = master->writesize; -+ slave->mtd.oobsize = master->oobsize; -+ slave->mtd.ecctype = master->ecctype; -+ slave->mtd.eccsize = master->eccsize; -+ -+ slave->mtd.name = part->name; -+ slave->mtd.bank_size = master->bank_size; -+ slave->mtd.owner = master->owner; -+ -+ slave->mtd.read = part_read; -+ slave->mtd.write = part_write; -+ -+ if(master->point && master->unpoint){ -+ slave->mtd.point = part_point; -+ slave->mtd.unpoint = part_unpoint; -+ } -+ -+ if (master->read_oob) -+ slave->mtd.read_oob = part_read_oob; -+ if (master->write_oob) -+ slave->mtd.write_oob = part_write_oob; -+ if(master->read_user_prot_reg) -+ slave->mtd.read_user_prot_reg = part_read_user_prot_reg; -+ if(master->read_fact_prot_reg) -+ slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg; -+ if(master->write_user_prot_reg) -+ slave->mtd.write_user_prot_reg = part_write_user_prot_reg; -+ if(master->lock_user_prot_reg) -+ slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg; -+ if(master->get_user_prot_info) -+ slave->mtd.get_user_prot_info = part_get_user_prot_info; -+ if(master->get_fact_prot_info) -+ slave->mtd.get_fact_prot_info = part_get_fact_prot_info; -+ if (master->sync) -+ slave->mtd.sync = part_sync; -+ if (!i && master->suspend && master->resume) { -+ slave->mtd.suspend = part_suspend; -+ slave->mtd.resume = part_resume; -+ } -+ if (master->writev) -+ slave->mtd.writev = part_writev; -+ if (master->lock) -+ slave->mtd.lock = part_lock; -+ if (master->unlock) -+ slave->mtd.unlock = part_unlock; -+ if (master->block_isbad) -+ slave->mtd.block_isbad = part_block_isbad; -+ if (master->block_markbad) -+ slave->mtd.block_markbad = part_block_markbad; -+ slave->mtd.erase = part_erase; -+ slave->master = master; -+ slave->offset = part->offset; -+ slave->index = i; -+ -+ if (slave->offset == MTDPART_OFS_APPEND) -+ slave->offset = cur_offset; -+ if (slave->offset == MTDPART_OFS_NXTBLK) { -+ slave->offset = cur_offset; -+ if ((cur_offset % master->erasesize) != 0) { -+ /* Round up to next erasesize */ -+ slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize; -+ printk(KERN_NOTICE "Moving partition %d: " -+ "0x%08x -> 0x%08x\n", i, -+ cur_offset, slave->offset); -+ } -+ } -+ if (slave->mtd.size == MTDPART_SIZ_FULL) -+ slave->mtd.size = master->size - slave->offset; -+ cur_offset = slave->offset + slave->mtd.size; -+ -+ printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset, -+ slave->offset + slave->mtd.size, slave->mtd.name); -+ -+ /* let's do some sanity checks */ -+ if (slave->offset >= master->size) { -+ /* let's register it anyway to preserve ordering */ -+ slave->offset = 0; -+ slave->mtd.size = 0; -+ printk ("mtd: partition \"%s\" is out of reach -- disabled\n", -+ part->name); -+ } -+ if (slave->offset + slave->mtd.size > master->size) { -+ slave->mtd.size = master->size - slave->offset; -+ printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n", -+ part->name, master->name, slave->mtd.size); -+ } -+ if (master->numeraseregions>1) { -+ /* Deal with variable erase size stuff */ -+ int i; -+ struct mtd_erase_region_info *regions = master->eraseregions; -+ -+ /* Find the first erase regions which is part of this partition. */ -+ for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++) -+ ; -+ -+ for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) { -+ if (slave->mtd.erasesize < regions[i].erasesize) { -+ slave->mtd.erasesize = regions[i].erasesize; -+ } -+ } -+ } else { -+ /* Single erase size */ -+ slave->mtd.erasesize = master->erasesize; -+ } -+ -+ if ((slave->mtd.flags & MTD_WRITEABLE) && -+ (slave->offset % slave->mtd.erasesize)) { -+ /* Doesn't start on a boundary of major erase size */ -+ /* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */ -+ slave->mtd.flags &= ~MTD_WRITEABLE; -+ printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n", -+ part->name); -+ } -+ if ((slave->mtd.flags & MTD_WRITEABLE) && -+ (slave->mtd.size % slave->mtd.erasesize)) { -+ slave->mtd.flags &= ~MTD_WRITEABLE; -+ printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n", -+ part->name); -+ } -+ -+ slave->mtd.ecclayout = master->ecclayout; -+ if (master->block_isbad) { -+ uint32_t offs = 0; -+ -+ while(offs < slave->mtd.size) { -+ if (master->block_isbad(master, -+ offs + slave->offset)) -+ slave->mtd.ecc_stats.badblocks++; -+ offs += slave->mtd.erasesize; -+ } -+ } -+ -+ if(part->mtdp) -+ { /* store the object pointer (caller may or may not register it */ -+ *part->mtdp = &slave->mtd; -+ slave->registered = 0; -+ } -+ else -+ { -+ /* register our partition */ -+ add_mtd_device(&slave->mtd); -+ slave->registered = 1; -+ } -+ -+ return 0; -+} -+ - /* - * This function, given a master MTD object and a partition table, creates - * and registers slave MTD objects which are bound to the master according to -@@ -314,171 +483,53 @@ - const struct mtd_partition *parts, - int nbparts) - { -- struct mtd_part *slave; -- u_int32_t cur_offset = 0; -- int i; -+ struct mtd_partition *part; -+ int i, ret = 0; - - printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name); - - for (i = 0; i < nbparts; i++) { -+ part = (struct mtd_partition *) &parts[i]; -+ ret = add_mtd_partition(master, part, i); -+ if (ret) -+ return ret; -+ if (strcmp(part->name, "rootfs") == 0) { -+#ifdef CONFIG_MTD_SPLIT_ROOTFS -+ int len; -+ char buf[512]; -+ struct squashfs_super_block *sb = (struct squashfs_super_block *) buf; -+#define ROOTFS_SPLIT_NAME "rootfs_data" -+ if ((master->read(master, part->offset, sizeof(struct squashfs_super_block), &len, buf) == 0) && -+ (len == sizeof(struct squashfs_super_block)) && -+ (*((u32 *) buf) == SQUASHFS_MAGIC) && -+ (sb->bytes_used > 0)) { -+ -+ -+ part = kmalloc(sizeof(struct mtd_partition), GFP_KERNEL); -+ memcpy(part, &parts[i], sizeof(struct mtd_partition)); -+ -+ part->name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL); -+ strcpy(part->name, ROOTFS_SPLIT_NAME); -+ -+ len = (u32) sb->bytes_used; -+ len += (part->offset & 0x000fffff); -+ len += (master->erasesize - 1); -+ len &= ~(master->erasesize - 1); -+ len -= (part->offset & 0x000fffff); -+ part->offset += len; -+ part->size -= len; -+ -+ if (master->erasesize <= part->size) -+ ret = add_mtd_partition(master, part, i + 1); -+ else -+ kfree(part->name); -+ if (ret) -+ return ret; - -- /* allocate the partition structure */ -- slave = kmalloc (sizeof(*slave), GFP_KERNEL); -- if (!slave) { -- printk ("memory allocation error while creating partitions for \"%s\"\n", -- master->name); -- del_mtd_partitions(master); -- return -ENOMEM; -- } -- memset(slave, 0, sizeof(*slave)); -- list_add(&slave->list, &mtd_partitions); -- -- /* set up the MTD object for this partition */ -- slave->mtd.type = master->type; -- slave->mtd.flags = master->flags & ~parts[i].mask_flags; -- slave->mtd.size = parts[i].size; -- slave->mtd.writesize = master->writesize; -- slave->mtd.oobsize = master->oobsize; -- slave->mtd.ecctype = master->ecctype; -- slave->mtd.eccsize = master->eccsize; -- -- slave->mtd.name = parts[i].name; -- slave->mtd.bank_size = master->bank_size; -- slave->mtd.owner = master->owner; -- -- slave->mtd.read = part_read; -- slave->mtd.write = part_write; -- -- if(master->point && master->unpoint){ -- slave->mtd.point = part_point; -- slave->mtd.unpoint = part_unpoint; -- } -- -- if (master->read_oob) -- slave->mtd.read_oob = part_read_oob; -- if (master->write_oob) -- slave->mtd.write_oob = part_write_oob; -- if(master->read_user_prot_reg) -- slave->mtd.read_user_prot_reg = part_read_user_prot_reg; -- if(master->read_fact_prot_reg) -- slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg; -- if(master->write_user_prot_reg) -- slave->mtd.write_user_prot_reg = part_write_user_prot_reg; -- if(master->lock_user_prot_reg) -- slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg; -- if(master->get_user_prot_info) -- slave->mtd.get_user_prot_info = part_get_user_prot_info; -- if(master->get_fact_prot_info) -- slave->mtd.get_fact_prot_info = part_get_fact_prot_info; -- if (master->sync) -- slave->mtd.sync = part_sync; -- if (!i && master->suspend && master->resume) { -- slave->mtd.suspend = part_suspend; -- slave->mtd.resume = part_resume; -- } -- if (master->writev) -- slave->mtd.writev = part_writev; -- if (master->lock) -- slave->mtd.lock = part_lock; -- if (master->unlock) -- slave->mtd.unlock = part_unlock; -- if (master->block_isbad) -- slave->mtd.block_isbad = part_block_isbad; -- if (master->block_markbad) -- slave->mtd.block_markbad = part_block_markbad; -- slave->mtd.erase = part_erase; -- slave->master = master; -- slave->offset = parts[i].offset; -- slave->index = i; -- -- if (slave->offset == MTDPART_OFS_APPEND) -- slave->offset = cur_offset; -- if (slave->offset == MTDPART_OFS_NXTBLK) { -- slave->offset = cur_offset; -- if ((cur_offset % master->erasesize) != 0) { -- /* Round up to next erasesize */ -- slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize; -- printk(KERN_NOTICE "Moving partition %d: " -- "0x%08x -> 0x%08x\n", i, -- cur_offset, slave->offset); -+ kfree(part); - } -- } -- if (slave->mtd.size == MTDPART_SIZ_FULL) -- slave->mtd.size = master->size - slave->offset; -- cur_offset = slave->offset + slave->mtd.size; -- -- printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset, -- slave->offset + slave->mtd.size, slave->mtd.name); -- -- /* let's do some sanity checks */ -- if (slave->offset >= master->size) { -- /* let's register it anyway to preserve ordering */ -- slave->offset = 0; -- slave->mtd.size = 0; -- printk ("mtd: partition \"%s\" is out of reach -- disabled\n", -- parts[i].name); -- } -- if (slave->offset + slave->mtd.size > master->size) { -- slave->mtd.size = master->size - slave->offset; -- printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n", -- parts[i].name, master->name, slave->mtd.size); -- } -- if (master->numeraseregions>1) { -- /* Deal with variable erase size stuff */ -- int i; -- struct mtd_erase_region_info *regions = master->eraseregions; -- -- /* Find the first erase regions which is part of this partition. */ -- for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++) -- ; -- -- for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) { -- if (slave->mtd.erasesize < regions[i].erasesize) { -- slave->mtd.erasesize = regions[i].erasesize; -- } -- } -- } else { -- /* Single erase size */ -- slave->mtd.erasesize = master->erasesize; -- } -- -- if ((slave->mtd.flags & MTD_WRITEABLE) && -- (slave->offset % slave->mtd.erasesize)) { -- /* Doesn't start on a boundary of major erase size */ -- /* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */ -- slave->mtd.flags &= ~MTD_WRITEABLE; -- printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n", -- parts[i].name); -- } -- if ((slave->mtd.flags & MTD_WRITEABLE) && -- (slave->mtd.size % slave->mtd.erasesize)) { -- slave->mtd.flags &= ~MTD_WRITEABLE; -- printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n", -- parts[i].name); -- } -- -- slave->mtd.ecclayout = master->ecclayout; -- if (master->block_isbad) { -- uint32_t offs = 0; -- -- while(offs < slave->mtd.size) { -- if (master->block_isbad(master, -- offs + slave->offset)) -- slave->mtd.ecc_stats.badblocks++; -- offs += slave->mtd.erasesize; -- } -- } -- -- if(parts[i].mtdp) -- { /* store the object pointer (caller may or may not register it */ -- *parts[i].mtdp = &slave->mtd; -- slave->registered = 0; -- } -- else -- { -- /* register our partition */ -- add_mtd_device(&slave->mtd); -- slave->registered = 1; -+#endif /* CONFIG_MTD_SPLIT_ROOTFS */ -+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, i); - } - } - diff --git a/target/linux/etrax/patches/generic_2.6/065-block2mtd_init.patch b/target/linux/etrax/patches/generic_2.6/065-block2mtd_init.patch deleted file mode 100644 index ef483bedd1..0000000000 --- a/target/linux/etrax/patches/generic_2.6/065-block2mtd_init.patch +++ /dev/null @@ -1,112 +0,0 @@ ---- linux.old/drivers/mtd/devices/block2mtd.c 2007-03-02 01:00:13.866987272 +0100 -+++ linux.dev/drivers/mtd/devices/block2mtd.c 2007-03-02 02:03:45.558522080 +0100 -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -287,10 +288,11 @@ - - - /* FIXME: ensure that mtd->size % erase_size == 0 */ --static struct block2mtd_dev *add_device(char *devname, int erase_size) -+static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname) - { - struct block_device *bdev; - struct block2mtd_dev *dev; -+ struct mtd_partition *part; - - if (!devname) - return NULL; -@@ -330,14 +332,18 @@ - - /* Setup the MTD structure */ - /* make the name contain the block device in */ -- dev->mtd.name = kmalloc(sizeof("block2mtd: ") + strlen(devname), -- GFP_KERNEL); -+ -+ if (!mtdname) -+ mtdname = devname; -+ -+ dev->mtd.name = kmalloc(strlen(mtdname), GFP_KERNEL); -+ - if (!dev->mtd.name) - goto devinit_err; -+ -+ strcpy(dev->mtd.name, mtdname); - -- sprintf(dev->mtd.name, "block2mtd: %s", devname); -- -- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK; -+ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1); - dev->mtd.erasesize = erase_size; - dev->mtd.writesize = 1; - dev->mtd.type = MTD_RAM; -@@ -349,15 +355,18 @@ - dev->mtd.read = block2mtd_read; - dev->mtd.priv = dev; - dev->mtd.owner = THIS_MODULE; -- -- if (add_mtd_device(&dev->mtd)) { -+ -+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL); -+ part->name = dev->mtd.name; -+ part->offset = 0; -+ part->size = dev->mtd.size; -+ if (add_mtd_partitions(&dev->mtd, part, 1)) { - /* Device didnt get added, so free the entry */ - goto devinit_err; - } - list_add(&dev->list, &blkmtd_device_list); - INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index, -- dev->mtd.name + strlen("blkmtd: "), -- dev->mtd.erasesize >> 10, dev->mtd.erasesize); -+ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize); - return dev; - - devinit_err: -@@ -430,9 +439,9 @@ - - static int block2mtd_setup2(const char *val) - { -- char buf[80 + 12]; /* 80 for device, 12 for erase size */ -+ char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */ - char *str = buf; -- char *token[2]; -+ char *token[3]; - char *name; - size_t erase_size = PAGE_SIZE; - int i, ret; -@@ -443,7 +452,7 @@ - strcpy(str, val); - kill_final_newline(str); - -- for (i = 0; i < 2; i++) -+ for (i = 0; i < 3; i++) - token[i] = strsep(&str, ","); - - if (str) -@@ -463,8 +472,10 @@ - parse_err("illegal erase size"); - } - } -+ if (token[2] && (strlen(token[2]) + 1 > 80)) -+ parse_err("mtd device name too long"); - -- add_device(name, erase_size); -+ add_device(name, erase_size, token[2]); - - return 0; - } -@@ -498,7 +509,7 @@ - - - module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200); --MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=[,]\""); -+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=[,[,]]\""); - - static int __init block2mtd_init(void) - { diff --git a/target/linux/etrax/patches/generic_2.6/100-netfilter_layer7_2.8.patch b/target/linux/etrax/patches/generic_2.6/100-netfilter_layer7_2.8.patch deleted file mode 100644 index 876423cac7..0000000000 --- a/target/linux/etrax/patches/generic_2.6/100-netfilter_layer7_2.8.patch +++ /dev/null @@ -1,2053 +0,0 @@ -diff -urN linux.old/include/linux/netfilter_ipv4/ip_conntrack.h linux.dev/include/linux/netfilter_ipv4/ip_conntrack.h ---- linux.old/include/linux/netfilter_ipv4/ip_conntrack.h 2007-01-01 05:17:07.000000000 +0100 -+++ linux.dev/include/linux/netfilter_ipv4/ip_conntrack.h 2007-01-01 05:18:48.000000000 +0100 -@@ -127,6 +127,15 @@ - /* Traversed often, so hopefully in different cacheline to top */ - /* These are my tuples; original and reply */ - struct ip_conntrack_tuple_hash tuplehash[IP_CT_DIR_MAX]; -+ -+#if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE) -+ struct { -+ char * app_proto; /* e.g. "http". NULL before decision. "unknown" after decision if no match */ -+ char * app_data; /* application layer data so far. NULL after match decision */ -+ unsigned int app_data_len; -+ } layer7; -+#endif -+ - }; - - struct ip_conntrack_expect -diff -urN linux.old/include/linux/netfilter_ipv4/ipt_layer7.h linux.dev/include/linux/netfilter_ipv4/ipt_layer7.h ---- linux.old/include/linux/netfilter_ipv4/ipt_layer7.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/linux/netfilter_ipv4/ipt_layer7.h 2007-01-01 05:18:48.000000000 +0100 -@@ -0,0 +1,26 @@ -+/* -+ By Matthew Strait , Dec 2003. -+ http://l7-filter.sf.net -+ -+ This program is free software; you can redistribute it and/or -+ modify it under the terms of the GNU General Public License -+ as published by the Free Software Foundation; either version -+ 2 of the License, or (at your option) any later version. -+ http://www.gnu.org/licenses/gpl.txt -+*/ -+ -+#ifndef _IPT_LAYER7_H -+#define _IPT_LAYER7_H -+ -+#define MAX_PATTERN_LEN 8192 -+#define MAX_PROTOCOL_LEN 256 -+ -+typedef char *(*proc_ipt_search) (char *, char, char *); -+ -+struct ipt_layer7_info { -+ char protocol[MAX_PROTOCOL_LEN]; -+ char invert:1; -+ char pattern[MAX_PATTERN_LEN]; -+}; -+ -+#endif /* _IPT_LAYER7_H */ -diff -urN linux.old/net/ipv4/netfilter/ip_conntrack_core.c linux.dev/net/ipv4/netfilter/ip_conntrack_core.c ---- linux.old/net/ipv4/netfilter/ip_conntrack_core.c 2007-01-01 05:17:07.000000000 +0100 -+++ linux.dev/net/ipv4/netfilter/ip_conntrack_core.c 2007-01-01 05:18:48.000000000 +0100 -@@ -337,6 +337,13 @@ - * too. */ - ip_ct_remove_expectations(ct); - -+ #if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE) -+ if(ct->layer7.app_proto) -+ kfree(ct->layer7.app_proto); -+ if(ct->layer7.app_data) -+ kfree(ct->layer7.app_data); -+ #endif -+ - /* We overload first tuple to link into unconfirmed list. */ - if (!is_confirmed(ct)) { - BUG_ON(list_empty(&ct->tuplehash[IP_CT_DIR_ORIGINAL].list)); -diff -urN linux.old/net/ipv4/netfilter/ip_conntrack_standalone.c linux.dev/net/ipv4/netfilter/ip_conntrack_standalone.c ---- linux.old/net/ipv4/netfilter/ip_conntrack_standalone.c 2007-01-01 05:17:07.000000000 +0100 -+++ linux.dev/net/ipv4/netfilter/ip_conntrack_standalone.c 2007-01-01 05:18:48.000000000 +0100 -@@ -192,6 +192,12 @@ - return -ENOSPC; - #endif - -+#if defined(CONFIG_IP_NF_MATCH_LAYER7) || defined(CONFIG_IP_NF_MATCH_LAYER7_MODULE) -+ if(conntrack->layer7.app_proto) -+ if (seq_printf(s, "l7proto=%s ",conntrack->layer7.app_proto)) -+ return 1; -+#endif -+ - if (seq_printf(s, "use=%u\n", atomic_read(&conntrack->ct_general.use))) - return -ENOSPC; - -diff -urN linux.old/net/ipv4/netfilter/ipt_layer7.c linux.dev/net/ipv4/netfilter/ipt_layer7.c ---- linux.old/net/ipv4/netfilter/ipt_layer7.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/net/ipv4/netfilter/ipt_layer7.c 2007-01-01 05:18:48.000000000 +0100 -@@ -0,0 +1,573 @@ -+/* -+ Kernel module to match application layer (OSI layer 7) data in connections. -+ -+ http://l7-filter.sf.net -+ -+ By Matthew Strait and Ethan Sommer, 2003-2006. -+ -+ This program is free software; you can redistribute it and/or -+ modify it under the terms of the GNU General Public License -+ as published by the Free Software Foundation; either version -+ 2 of the License, or (at your option) any later version. -+ http://www.gnu.org/licenses/gpl.txt -+ -+ Based on ipt_string.c (C) 2000 Emmanuel Roger -+ and cls_layer7.c (C) 2003 Matthew Strait, Ethan Sommer, Justin Levandoski -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "regexp/regexp.c" -+ -+#include -+#include -+ -+MODULE_AUTHOR("Matthew Strait , Ethan Sommer "); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("iptables application layer match module"); -+MODULE_VERSION("2.0"); -+ -+static int maxdatalen = 2048; // this is the default -+module_param(maxdatalen, int, 0444); -+MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter"); -+ -+#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG -+ #define DPRINTK(format,args...) printk(format,##args) -+#else -+ #define DPRINTK(format,args...) -+#endif -+ -+#define TOTAL_PACKETS master_conntrack->counters[IP_CT_DIR_ORIGINAL].packets + \ -+ master_conntrack->counters[IP_CT_DIR_REPLY].packets -+ -+/* Number of packets whose data we look at. -+This can be modified through /proc/net/layer7_numpackets */ -+static int num_packets = 10; -+ -+static struct pattern_cache { -+ char * regex_string; -+ regexp * pattern; -+ struct pattern_cache * next; -+} * first_pattern_cache = NULL; -+ -+/* I'm new to locking. Here are my assumptions: -+ -+- No one will write to /proc/net/layer7_numpackets over and over very fast; -+ if they did, nothing awful would happen. -+ -+- This code will never be processing the same packet twice at the same time, -+ because iptables rules are traversed in order. -+ -+- It doesn't matter if two packets from different connections are in here at -+ the same time, because they don't share any data. -+ -+- It _does_ matter if two packets from the same connection (or one from a -+ master and one from its child) are here at the same time. In this case, -+ we have to protect the conntracks and the list of compiled patterns. -+*/ -+DEFINE_RWLOCK(ct_lock); -+DEFINE_SPINLOCK(list_lock); -+ -+#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG -+/* Converts an unfriendly string into a friendly one by -+replacing unprintables with periods and all whitespace with " ". */ -+static char * friendly_print(unsigned char * s) -+{ -+ char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC); -+ int i; -+ -+ if(!f) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in friendly_print, bailing.\n"); -+ return NULL; -+ } -+ -+ for(i = 0; i < strlen(s); i++){ -+ if(isprint(s[i]) && s[i] < 128) f[i] = s[i]; -+ else if(isspace(s[i])) f[i] = ' '; -+ else f[i] = '.'; -+ } -+ f[i] = '\0'; -+ return f; -+} -+ -+static char dec2hex(int i) -+{ -+ switch (i) { -+ case 0 ... 9: -+ return (char)(i + '0'); -+ break; -+ case 10 ... 15: -+ return (char)(i - 10 + 'a'); -+ break; -+ default: -+ if (net_ratelimit()) -+ printk("Problem in dec2hex\n"); -+ return '\0'; -+ } -+} -+ -+static char * hex_print(unsigned char * s) -+{ -+ char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC); -+ int i; -+ -+ if(!g) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in hex_print, bailing.\n"); -+ return NULL; -+ } -+ -+ for(i = 0; i < strlen(s); i++) { -+ g[i*3 ] = dec2hex(s[i]/16); -+ g[i*3 + 1] = dec2hex(s[i]%16); -+ g[i*3 + 2] = ' '; -+ } -+ g[i*3] = '\0'; -+ -+ return g; -+} -+#endif // DEBUG -+ -+/* Use instead of regcomp. As we expect to be seeing the same regexps over and -+over again, it make sense to cache the results. */ -+static regexp * compile_and_cache(char * regex_string, char * protocol) -+{ -+ struct pattern_cache * node = first_pattern_cache; -+ struct pattern_cache * last_pattern_cache = first_pattern_cache; -+ struct pattern_cache * tmp; -+ unsigned int len; -+ -+ while (node != NULL) { -+ if (!strcmp(node->regex_string, regex_string)) -+ return node->pattern; -+ -+ last_pattern_cache = node;/* points at the last non-NULL node */ -+ node = node->next; -+ } -+ -+ /* If we reach the end of the list, then we have not yet cached -+ the pattern for this regex. Let's do that now. -+ Be paranoid about running out of memory to avoid list corruption. */ -+ tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC); -+ -+ if(!tmp) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in compile_and_cache, bailing.\n"); -+ return NULL; -+ } -+ -+ tmp->regex_string = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC); -+ tmp->pattern = kmalloc(sizeof(struct regexp), GFP_ATOMIC); -+ tmp->next = NULL; -+ -+ if(!tmp->regex_string || !tmp->pattern) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in compile_and_cache, bailing.\n"); -+ kfree(tmp->regex_string); -+ kfree(tmp->pattern); -+ kfree(tmp); -+ return NULL; -+ } -+ -+ /* Ok. The new node is all ready now. */ -+ node = tmp; -+ -+ if(first_pattern_cache == NULL) /* list is empty */ -+ first_pattern_cache = node; /* make node the beginning */ -+ else -+ last_pattern_cache->next = node; /* attach node to the end */ -+ -+ /* copy the string and compile the regex */ -+ len = strlen(regex_string); -+ DPRINTK("About to compile this: \"%s\"\n", regex_string); -+ node->pattern = regcomp(regex_string, &len); -+ if ( !node->pattern ) { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: Error compiling regexp \"%s\" (%s)\n", regex_string, protocol); -+ /* pattern is now cached as NULL, so we won't try again. */ -+ } -+ -+ strcpy(node->regex_string, regex_string); -+ return node->pattern; -+} -+ -+static int can_handle(const struct sk_buff *skb) -+{ -+ if(!skb->nh.iph) /* not IP */ -+ return 0; -+ if(skb->nh.iph->protocol != IPPROTO_TCP && -+ skb->nh.iph->protocol != IPPROTO_UDP && -+ skb->nh.iph->protocol != IPPROTO_ICMP) -+ return 0; -+ return 1; -+} -+ -+/* Returns offset the into the skb->data that the application data starts */ -+static int app_data_offset(const struct sk_buff *skb) -+{ -+ /* In case we are ported somewhere (ebtables?) where skb->nh.iph -+ isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */ -+ int ip_hl = 4*skb->nh.iph->ihl; -+ -+ if( skb->nh.iph->protocol == IPPROTO_TCP ) { -+ /* 12 == offset into TCP header for the header length field. -+ Can't get this with skb->h.th->doff because the tcphdr -+ struct doesn't get set when routing (this is confirmed to be -+ true in Netfilter as well as QoS.) */ -+ int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4); -+ -+ return ip_hl + tcp_hl; -+ } else if( skb->nh.iph->protocol == IPPROTO_UDP ) { -+ return ip_hl + 8; /* UDP header is always 8 bytes */ -+ } else if( skb->nh.iph->protocol == IPPROTO_ICMP ) { -+ return ip_hl + 8; /* ICMP header is 8 bytes */ -+ } else { -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: tried to handle unknown protocol!\n"); -+ return ip_hl + 8; /* something reasonable */ -+ } -+} -+ -+/* handles whether there's a match when we aren't appending data anymore */ -+static int match_no_append(struct ip_conntrack * conntrack, struct ip_conntrack * master_conntrack, -+ enum ip_conntrack_info ctinfo, enum ip_conntrack_info master_ctinfo, -+ struct ipt_layer7_info * info) -+{ -+ /* If we're in here, throw the app data away */ -+ write_lock(&ct_lock); -+ if(master_conntrack->layer7.app_data != NULL) { -+ -+ #ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG -+ if(!master_conntrack->layer7.app_proto) { -+ char * f = friendly_print(master_conntrack->layer7.app_data); -+ char * g = hex_print(master_conntrack->layer7.app_data); -+ DPRINTK("\nl7-filter gave up after %d bytes (%d packets):\n%s\n", -+ strlen(f), TOTAL_PACKETS, f); -+ kfree(f); -+ DPRINTK("In hex: %s\n", g); -+ kfree(g); -+ } -+ #endif -+ -+ kfree(master_conntrack->layer7.app_data); -+ master_conntrack->layer7.app_data = NULL; /* don't free again */ -+ } -+ write_unlock(&ct_lock); -+ -+ if(master_conntrack->layer7.app_proto){ -+ /* Here child connections set their .app_proto (for /proc/net/ip_conntrack) */ -+ write_lock(&ct_lock); -+ if(!conntrack->layer7.app_proto) { -+ conntrack->layer7.app_proto = kmalloc(strlen(master_conntrack->layer7.app_proto)+1, GFP_ATOMIC); -+ if(!conntrack->layer7.app_proto){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in match_no_append, bailing.\n"); -+ write_unlock(&ct_lock); -+ return 1; -+ } -+ strcpy(conntrack->layer7.app_proto, master_conntrack->layer7.app_proto); -+ } -+ write_unlock(&ct_lock); -+ -+ return (!strcmp(master_conntrack->layer7.app_proto, info->protocol)); -+ } -+ else { -+ /* If not classified, set to "unknown" to distinguish from -+ connections that are still being tested. */ -+ write_lock(&ct_lock); -+ master_conntrack->layer7.app_proto = kmalloc(strlen("unknown")+1, GFP_ATOMIC); -+ if(!master_conntrack->layer7.app_proto){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in match_no_append, bailing.\n"); -+ write_unlock(&ct_lock); -+ return 1; -+ } -+ strcpy(master_conntrack->layer7.app_proto, "unknown"); -+ write_unlock(&ct_lock); -+ return 0; -+ } -+} -+ -+/* add the new app data to the conntrack. Return number of bytes added. */ -+static int add_data(struct ip_conntrack * master_conntrack, -+ char * app_data, int appdatalen) -+{ -+ int length = 0, i; -+ int oldlength = master_conntrack->layer7.app_data_len; -+ -+ // This is a fix for a race condition by Deti Fliegl. However, I'm not -+ // clear on whether the race condition exists or whether this really -+ // fixes it. I might just be being dense... Anyway, if it's not really -+ // a fix, all it does is waste a very small amount of time. -+ if(!master_conntrack->layer7.app_data) return 0; -+ -+ /* Strip nulls. Make everything lower case (our regex lib doesn't -+ do case insensitivity). Add it to the end of the current data. */ -+ for(i = 0; i < maxdatalen-oldlength-1 && -+ i < appdatalen; i++) { -+ if(app_data[i] != '\0') { -+ master_conntrack->layer7.app_data[length+oldlength] = -+ /* the kernel version of tolower mungs 'upper ascii' */ -+ isascii(app_data[i])? tolower(app_data[i]) : app_data[i]; -+ length++; -+ } -+ } -+ -+ master_conntrack->layer7.app_data[length+oldlength] = '\0'; -+ master_conntrack->layer7.app_data_len = length + oldlength; -+ -+ return length; -+} -+ -+/* Returns true on match and false otherwise. */ -+static int match(const struct sk_buff *skbin, -+ const struct net_device *in, const struct net_device *out, -+ const struct xt_match *match, const void *matchinfo, -+ int offset, unsigned int protoff, int *hotdrop) -+{ -+ /* sidestep const without getting a compiler warning... */ -+ struct sk_buff * skb = (struct sk_buff *)skbin; -+ -+ struct ipt_layer7_info * info = (struct ipt_layer7_info *)matchinfo; -+ enum ip_conntrack_info master_ctinfo, ctinfo; -+ struct ip_conntrack *master_conntrack, *conntrack; -+ unsigned char * app_data; -+ unsigned int pattern_result, appdatalen; -+ regexp * comppattern; -+ -+ if(!can_handle(skb)){ -+ DPRINTK("layer7: This is some protocol I can't handle.\n"); -+ return info->invert; -+ } -+ -+ /* Treat parent & all its children together as one connection, except -+ for the purpose of setting conntrack->layer7.app_proto in the actual -+ connection. This makes /proc/net/ip_conntrack more satisfying. */ -+ if(!(conntrack = ip_conntrack_get((struct sk_buff *)skb, &ctinfo)) || -+ !(master_conntrack = ip_conntrack_get((struct sk_buff *)skb, &master_ctinfo))) { -+ //DPRINTK("layer7: packet is not from a known connection, giving up.\n"); -+ return info->invert; -+ } -+ -+ /* Try to get a master conntrack (and its master etc) for FTP, etc. */ -+ while (master_ct(master_conntrack) != NULL) -+ master_conntrack = master_ct(master_conntrack); -+ -+ /* if we've classified it or seen too many packets */ -+ if(TOTAL_PACKETS > num_packets || -+ master_conntrack->layer7.app_proto) { -+ -+ pattern_result = match_no_append(conntrack, master_conntrack, ctinfo, master_ctinfo, info); -+ -+ /* skb->cb[0] == seen. Avoid doing things twice if there are two l7 -+ rules. I'm not sure that using cb for this purpose is correct, although -+ it says "put your private variables there". But it doesn't look like it -+ is being used for anything else in the skbs that make it here. How can -+ I write to cb without making the compiler angry? */ -+ skb->cb[0] = 1; /* marking it seen here is probably irrelevant, but consistant */ -+ -+ return (pattern_result ^ info->invert); -+ } -+ -+ if(skb_is_nonlinear(skb)){ -+ if(skb_linearize(skb) != 0){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: failed to linearize packet, bailing.\n"); -+ return info->invert; -+ } -+ } -+ -+ /* now that the skb is linearized, it's safe to set these. */ -+ app_data = skb->data + app_data_offset(skb); -+ appdatalen = skb->tail - app_data; -+ -+ spin_lock_bh(&list_lock); -+ /* the return value gets checked later, when we're ready to use it */ -+ comppattern = compile_and_cache(info->pattern, info->protocol); -+ spin_unlock_bh(&list_lock); -+ -+ /* On the first packet of a connection, allocate space for app data */ -+ write_lock(&ct_lock); -+ if(TOTAL_PACKETS == 1 && !skb->cb[0] && !master_conntrack->layer7.app_data) { -+ master_conntrack->layer7.app_data = kmalloc(maxdatalen, GFP_ATOMIC); -+ if(!master_conntrack->layer7.app_data){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in match, bailing.\n"); -+ write_unlock(&ct_lock); -+ return info->invert; -+ } -+ -+ master_conntrack->layer7.app_data[0] = '\0'; -+ } -+ write_unlock(&ct_lock); -+ -+ /* Can be here, but unallocated, if numpackets is increased near -+ the beginning of a connection */ -+ if(master_conntrack->layer7.app_data == NULL) -+ return (info->invert); /* unmatched */ -+ -+ if(!skb->cb[0]){ -+ int newbytes; -+ write_lock(&ct_lock); -+ newbytes = add_data(master_conntrack, app_data, appdatalen); -+ write_unlock(&ct_lock); -+ -+ if(newbytes == 0) { /* didn't add any data */ -+ skb->cb[0] = 1; -+ /* Didn't match before, not going to match now */ -+ return info->invert; -+ } -+ } -+ -+ /* If looking for "unknown", then never match. "Unknown" means that -+ we've given up; we're still trying with these packets. */ -+ read_lock(&ct_lock); -+ if(!strcmp(info->protocol, "unknown")) { -+ pattern_result = 0; -+ /* If the regexp failed to compile, don't bother running it */ -+ } else if(comppattern && regexec(comppattern, master_conntrack->layer7.app_data)) { -+ DPRINTK("layer7: matched %s\n", info->protocol); -+ pattern_result = 1; -+ } else pattern_result = 0; -+ read_unlock(&ct_lock); -+ -+ if(pattern_result) { -+ write_lock(&ct_lock); -+ master_conntrack->layer7.app_proto = kmalloc(strlen(info->protocol)+1, GFP_ATOMIC); -+ if(!master_conntrack->layer7.app_proto){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in match, bailing.\n"); -+ write_unlock(&ct_lock); -+ return (pattern_result ^ info->invert); -+ } -+ strcpy(master_conntrack->layer7.app_proto, info->protocol); -+ write_unlock(&ct_lock); -+ } -+ -+ /* mark the packet seen */ -+ skb->cb[0] = 1; -+ -+ return (pattern_result ^ info->invert); -+} -+ -+static struct ipt_match layer7_match = { -+ .name = "layer7", -+ .match = &match, -+ .matchsize = sizeof(struct ipt_layer7_info), -+ .me = THIS_MODULE -+}; -+ -+/* taken from drivers/video/modedb.c */ -+static int my_atoi(const char *s) -+{ -+ int val = 0; -+ -+ for (;; s++) { -+ switch (*s) { -+ case '0'...'9': -+ val = 10*val+(*s-'0'); -+ break; -+ default: -+ return val; -+ } -+ } -+} -+ -+/* write out num_packets to userland. */ -+static int layer7_read_proc(char* page, char ** start, off_t off, int count, -+ int* eof, void * data) -+{ -+ if(num_packets > 99 && net_ratelimit()) -+ printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n"); -+ -+ page[0] = num_packets/10 + '0'; -+ page[1] = num_packets%10 + '0'; -+ page[2] = '\n'; -+ page[3] = '\0'; -+ -+ *eof=1; -+ -+ return 3; -+} -+ -+/* Read in num_packets from userland */ -+static int layer7_write_proc(struct file* file, const char* buffer, -+ unsigned long count, void *data) -+{ -+ char * foo = kmalloc(count, GFP_ATOMIC); -+ -+ if(!foo){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory, bailing. num_packets unchanged.\n"); -+ return count; -+ } -+ -+ if(copy_from_user(foo, buffer, count)) { -+ return -EFAULT; -+ } -+ -+ -+ num_packets = my_atoi(foo); -+ kfree (foo); -+ -+ /* This has an arbitrary limit to make the math easier. I'm lazy. -+ But anyway, 99 is a LOT! If you want more, you're doing it wrong! */ -+ if(num_packets > 99) { -+ printk(KERN_WARNING "layer7: num_packets can't be > 99.\n"); -+ num_packets = 99; -+ } else if(num_packets < 1) { -+ printk(KERN_WARNING "layer7: num_packets can't be < 1.\n"); -+ num_packets = 1; -+ } -+ -+ return count; -+} -+ -+/* register the proc file */ -+static void layer7_init_proc(void) -+{ -+ struct proc_dir_entry* entry; -+ entry = create_proc_entry("layer7_numpackets", 0644, proc_net); -+ entry->read_proc = layer7_read_proc; -+ entry->write_proc = layer7_write_proc; -+} -+ -+static void layer7_cleanup_proc(void) -+{ -+ remove_proc_entry("layer7_numpackets", proc_net); -+} -+ -+static int __init ipt_layer7_init(void) -+{ -+ need_conntrack(); -+ -+ layer7_init_proc(); -+ if(maxdatalen < 1) { -+ printk(KERN_WARNING "layer7: maxdatalen can't be < 1, using 1\n"); -+ maxdatalen = 1; -+ } -+ /* This is not a hard limit. It's just here to prevent people from -+ bringing their slow machines to a grinding halt. */ -+ else if(maxdatalen > 65536) { -+ printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, using 65536\n"); -+ maxdatalen = 65536; -+ } -+ return ipt_register_match(&layer7_match); -+} -+ -+static void __exit ipt_layer7_fini(void) -+{ -+ layer7_cleanup_proc(); -+ ipt_unregister_match(&layer7_match); -+} -+ -+module_init(ipt_layer7_init); -+module_exit(ipt_layer7_fini); -diff -urN linux.old/net/ipv4/netfilter/Kconfig linux.dev/net/ipv4/netfilter/Kconfig ---- linux.old/net/ipv4/netfilter/Kconfig 2007-01-01 05:17:07.000000000 +0100 -+++ linux.dev/net/ipv4/netfilter/Kconfig 2007-01-01 05:18:48.000000000 +0100 -@@ -248,6 +248,24 @@ - - To compile it as a module, choose M here. If unsure, say N. - -+config IP_NF_MATCH_LAYER7 -+ tristate "Layer 7 match support (EXPERIMENTAL)" -+ depends on IP_NF_IPTABLES && IP_NF_CT_ACCT && IP_NF_CONNTRACK && EXPERIMENTAL -+ help -+ Say Y if you want to be able to classify connections (and their -+ packets) based on regular expression matching of their application -+ layer data. This is one way to classify applications such as -+ peer-to-peer filesharing systems that do not always use the same -+ port. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config IP_NF_MATCH_LAYER7_DEBUG -+ bool "Layer 7 debugging output" -+ depends on IP_NF_MATCH_LAYER7 -+ help -+ Say Y to get lots of debugging output. -+ - config IP_NF_MATCH_TOS - tristate "TOS match support" - depends on IP_NF_IPTABLES -diff -urN linux.old/net/ipv4/netfilter/Makefile linux.dev/net/ipv4/netfilter/Makefile ---- linux.old/net/ipv4/netfilter/Makefile 2007-01-01 05:17:07.000000000 +0100 -+++ linux.dev/net/ipv4/netfilter/Makefile 2007-01-01 05:18:48.000000000 +0100 -@@ -63,6 +63,8 @@ - obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o - obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ipt_addrtype.o - -+obj-$(CONFIG_IP_NF_MATCH_LAYER7) += ipt_layer7.o -+ - # targets - obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o - obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o -diff -urN linux.old/net/ipv4/netfilter/regexp/regexp.c linux.dev/net/ipv4/netfilter/regexp/regexp.c ---- linux.old/net/ipv4/netfilter/regexp/regexp.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/net/ipv4/netfilter/regexp/regexp.c 2007-01-01 05:18:48.000000000 +0100 -@@ -0,0 +1,1197 @@ -+/* -+ * regcomp and regexec -- regsub and regerror are elsewhere -+ * @(#)regexp.c 1.3 of 18 April 87 -+ * -+ * Copyright (c) 1986 by University of Toronto. -+ * Written by Henry Spencer. Not derived from licensed software. -+ * -+ * Permission is granted to anyone to use this software for any -+ * purpose on any computer system, and to redistribute it freely, -+ * subject to the following restrictions: -+ * -+ * 1. The author is not responsible for the consequences of use of -+ * this software, no matter how awful, even if they arise -+ * from defects in it. -+ * -+ * 2. The origin of this software must not be misrepresented, either -+ * by explicit claim or by omission. -+ * -+ * 3. Altered versions must be plainly marked as such, and must not -+ * be misrepresented as being the original software. -+ * -+ * Beware that some of this code is subtly aware of the way operator -+ * precedence is structured in regular expressions. Serious changes in -+ * regular-expression syntax might require a total rethink. -+ * -+ * This code was modified by Ethan Sommer to work within the kernel -+ * (it now uses kmalloc etc..) -+ * -+ * Modified slightly by Matthew Strait to use more modern C. -+ */ -+ -+#include "regexp.h" -+#include "regmagic.h" -+ -+/* added by ethan and matt. Lets it work in both kernel and user space. -+(So iptables can use it, for instance.) Yea, it goes both ways... */ -+#if __KERNEL__ -+ #define malloc(foo) kmalloc(foo,GFP_ATOMIC) -+#else -+ #define printk(format,args...) printf(format,##args) -+#endif -+ -+void regerror(char * s) -+{ -+ printk("<3>Regexp: %s\n", s); -+ /* NOTREACHED */ -+} -+ -+/* -+ * The "internal use only" fields in regexp.h are present to pass info from -+ * compile to execute that permits the execute phase to run lots faster on -+ * simple cases. They are: -+ * -+ * regstart char that must begin a match; '\0' if none obvious -+ * reganch is the match anchored (at beginning-of-line only)? -+ * regmust string (pointer into program) that match must include, or NULL -+ * regmlen length of regmust string -+ * -+ * Regstart and reganch permit very fast decisions on suitable starting points -+ * for a match, cutting down the work a lot. Regmust permits fast rejection -+ * of lines that cannot possibly match. The regmust tests are costly enough -+ * that regcomp() supplies a regmust only if the r.e. contains something -+ * potentially expensive (at present, the only such thing detected is * or + -+ * at the start of the r.e., which can involve a lot of backup). Regmlen is -+ * supplied because the test in regexec() needs it and regcomp() is computing -+ * it anyway. -+ */ -+ -+/* -+ * Structure for regexp "program". This is essentially a linear encoding -+ * of a nondeterministic finite-state machine (aka syntax charts or -+ * "railroad normal form" in parsing technology). Each node is an opcode -+ * plus a "next" pointer, possibly plus an operand. "Next" pointers of -+ * all nodes except BRANCH implement concatenation; a "next" pointer with -+ * a BRANCH on both ends of it is connecting two alternatives. (Here we -+ * have one of the subtle syntax dependencies: an individual BRANCH (as -+ * opposed to a collection of them) is never concatenated with anything -+ * because of operator precedence.) The operand of some types of node is -+ * a literal string; for others, it is a node leading into a sub-FSM. In -+ * particular, the operand of a BRANCH node is the first node of the branch. -+ * (NB this is *not* a tree structure: the tail of the branch connects -+ * to the thing following the set of BRANCHes.) The opcodes are: -+ */ -+ -+/* definition number opnd? meaning */ -+#define END 0 /* no End of program. */ -+#define BOL 1 /* no Match "" at beginning of line. */ -+#define EOL 2 /* no Match "" at end of line. */ -+#define ANY 3 /* no Match any one character. */ -+#define ANYOF 4 /* str Match any character in this string. */ -+#define ANYBUT 5 /* str Match any character not in this string. */ -+#define BRANCH 6 /* node Match this alternative, or the next... */ -+#define BACK 7 /* no Match "", "next" ptr points backward. */ -+#define EXACTLY 8 /* str Match this string. */ -+#define NOTHING 9 /* no Match empty string. */ -+#define STAR 10 /* node Match this (simple) thing 0 or more times. */ -+#define PLUS 11 /* node Match this (simple) thing 1 or more times. */ -+#define OPEN 20 /* no Mark this point in input as start of #n. */ -+ /* OPEN+1 is number 1, etc. */ -+#define CLOSE 30 /* no Analogous to OPEN. */ -+ -+/* -+ * Opcode notes: -+ * -+ * BRANCH The set of branches constituting a single choice are hooked -+ * together with their "next" pointers, since precedence prevents -+ * anything being concatenated to any individual branch. The -+ * "next" pointer of the last BRANCH in a choice points to the -+ * thing following the whole choice. This is also where the -+ * final "next" pointer of each individual branch points; each -+ * branch starts with the operand node of a BRANCH node. -+ * -+ * BACK Normal "next" pointers all implicitly point forward; BACK -+ * exists to make loop structures possible. -+ * -+ * STAR,PLUS '?', and complex '*' and '+', are implemented as circular -+ * BRANCH structures using BACK. Simple cases (one character -+ * per match) are implemented with STAR and PLUS for speed -+ * and to minimize recursive plunges. -+ * -+ * OPEN,CLOSE ...are numbered at compile time. -+ */ -+ -+/* -+ * A node is one char of opcode followed by two chars of "next" pointer. -+ * "Next" pointers are stored as two 8-bit pieces, high order first. The -+ * value is a positive offset from the opcode of the node containing it. -+ * An operand, if any, simply follows the node. (Note that much of the -+ * code generation knows about this implicit relationship.) -+ * -+ * Using two bytes for the "next" pointer is vast overkill for most things, -+ * but allows patterns to get big without disasters. -+ */ -+#define OP(p) (*(p)) -+#define NEXT(p) (((*((p)+1)&0377)<<8) + (*((p)+2)&0377)) -+#define OPERAND(p) ((p) + 3) -+ -+/* -+ * See regmagic.h for one further detail of program structure. -+ */ -+ -+ -+/* -+ * Utility definitions. -+ */ -+#ifndef CHARBITS -+#define UCHARAT(p) ((int)*(unsigned char *)(p)) -+#else -+#define UCHARAT(p) ((int)*(p)&CHARBITS) -+#endif -+ -+#define FAIL(m) { regerror(m); return(NULL); } -+#define ISMULT(c) ((c) == '*' || (c) == '+' || (c) == '?') -+#define META "^$.[()|?+*\\" -+ -+/* -+ * Flags to be passed up and down. -+ */ -+#define HASWIDTH 01 /* Known never to match null string. */ -+#define SIMPLE 02 /* Simple enough to be STAR/PLUS operand. */ -+#define SPSTART 04 /* Starts with * or +. */ -+#define WORST 0 /* Worst case. */ -+ -+/* -+ * Global work variables for regcomp(). -+ */ -+struct match_globals { -+char *reginput; /* String-input pointer. */ -+char *regbol; /* Beginning of input, for ^ check. */ -+char **regstartp; /* Pointer to startp array. */ -+char **regendp; /* Ditto for endp. */ -+char *regparse; /* Input-scan pointer. */ -+int regnpar; /* () count. */ -+char regdummy; -+char *regcode; /* Code-emit pointer; ®dummy = don't. */ -+long regsize; /* Code size. */ -+}; -+ -+/* -+ * Forward declarations for regcomp()'s friends. -+ */ -+#ifndef STATIC -+#define STATIC static -+#endif -+STATIC char *reg(struct match_globals *g, int paren,int *flagp); -+STATIC char *regbranch(struct match_globals *g, int *flagp); -+STATIC char *regpiece(struct match_globals *g, int *flagp); -+STATIC char *regatom(struct match_globals *g, int *flagp); -+STATIC char *regnode(struct match_globals *g, char op); -+STATIC char *regnext(struct match_globals *g, char *p); -+STATIC void regc(struct match_globals *g, char b); -+STATIC void reginsert(struct match_globals *g, char op, char *opnd); -+STATIC void regtail(struct match_globals *g, char *p, char *val); -+STATIC void regoptail(struct match_globals *g, char *p, char *val); -+ -+ -+__kernel_size_t my_strcspn(const char *s1,const char *s2) -+{ -+ char *scan1; -+ char *scan2; -+ int count; -+ -+ count = 0; -+ for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) { -+ for (scan2 = (char *)s2; *scan2 != '\0';) /* ++ moved down. */ -+ if (*scan1 == *scan2++) -+ return(count); -+ count++; -+ } -+ return(count); -+} -+ -+/* -+ - regcomp - compile a regular expression into internal code -+ * -+ * We can't allocate space until we know how big the compiled form will be, -+ * but we can't compile it (and thus know how big it is) until we've got a -+ * place to put the code. So we cheat: we compile it twice, once with code -+ * generation turned off and size counting turned on, and once "for real". -+ * This also means that we don't allocate space until we are sure that the -+ * thing really will compile successfully, and we never have to move the -+ * code and thus invalidate pointers into it. (Note that it has to be in -+ * one piece because free() must be able to free it all.) -+ * -+ * Beware that the optimization-preparation code in here knows about some -+ * of the structure of the compiled regexp. -+ */ -+regexp * -+regcomp(char *exp,int *patternsize) -+{ -+ register regexp *r; -+ register char *scan; -+ register char *longest; -+ register int len; -+ int flags; -+ struct match_globals g; -+ -+ /* commented out by ethan -+ extern char *malloc(); -+ */ -+ -+ if (exp == NULL) -+ FAIL("NULL argument"); -+ -+ /* First pass: determine size, legality. */ -+ g.regparse = exp; -+ g.regnpar = 1; -+ g.regsize = 0L; -+ g.regcode = &g.regdummy; -+ regc(&g, MAGIC); -+ if (reg(&g, 0, &flags) == NULL) -+ return(NULL); -+ -+ /* Small enough for pointer-storage convention? */ -+ if (g.regsize >= 32767L) /* Probably could be 65535L. */ -+ FAIL("regexp too big"); -+ -+ /* Allocate space. */ -+ *patternsize=sizeof(regexp) + (unsigned)g.regsize; -+ r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize); -+ if (r == NULL) -+ FAIL("out of space"); -+ -+ /* Second pass: emit code. */ -+ g.regparse = exp; -+ g.regnpar = 1; -+ g.regcode = r->program; -+ regc(&g, MAGIC); -+ if (reg(&g, 0, &flags) == NULL) -+ return(NULL); -+ -+ /* Dig out information for optimizations. */ -+ r->regstart = '\0'; /* Worst-case defaults. */ -+ r->reganch = 0; -+ r->regmust = NULL; -+ r->regmlen = 0; -+ scan = r->program+1; /* First BRANCH. */ -+ if (OP(regnext(&g, scan)) == END) { /* Only one top-level choice. */ -+ scan = OPERAND(scan); -+ -+ /* Starting-point info. */ -+ if (OP(scan) == EXACTLY) -+ r->regstart = *OPERAND(scan); -+ else if (OP(scan) == BOL) -+ r->reganch++; -+ -+ /* -+ * If there's something expensive in the r.e., find the -+ * longest literal string that must appear and make it the -+ * regmust. Resolve ties in favor of later strings, since -+ * the regstart check works with the beginning of the r.e. -+ * and avoiding duplication strengthens checking. Not a -+ * strong reason, but sufficient in the absence of others. -+ */ -+ if (flags&SPSTART) { -+ longest = NULL; -+ len = 0; -+ for (; scan != NULL; scan = regnext(&g, scan)) -+ if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) { -+ longest = OPERAND(scan); -+ len = strlen(OPERAND(scan)); -+ } -+ r->regmust = longest; -+ r->regmlen = len; -+ } -+ } -+ -+ return(r); -+} -+ -+/* -+ - reg - regular expression, i.e. main body or parenthesized thing -+ * -+ * Caller must absorb opening parenthesis. -+ * -+ * Combining parenthesis handling with the base level of regular expression -+ * is a trifle forced, but the need to tie the tails of the branches to what -+ * follows makes it hard to avoid. -+ */ -+static char * -+reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ ) -+{ -+ register char *ret; -+ register char *br; -+ register char *ender; -+ register int parno = 0; /* 0 makes gcc happy */ -+ int flags; -+ -+ *flagp = HASWIDTH; /* Tentatively. */ -+ -+ /* Make an OPEN node, if parenthesized. */ -+ if (paren) { -+ if (g->regnpar >= NSUBEXP) -+ FAIL("too many ()"); -+ parno = g->regnpar; -+ g->regnpar++; -+ ret = regnode(g, OPEN+parno); -+ } else -+ ret = NULL; -+ -+ /* Pick up the branches, linking them together. */ -+ br = regbranch(g, &flags); -+ if (br == NULL) -+ return(NULL); -+ if (ret != NULL) -+ regtail(g, ret, br); /* OPEN -> first. */ -+ else -+ ret = br; -+ if (!(flags&HASWIDTH)) -+ *flagp &= ~HASWIDTH; -+ *flagp |= flags&SPSTART; -+ while (*g->regparse == '|') { -+ g->regparse++; -+ br = regbranch(g, &flags); -+ if (br == NULL) -+ return(NULL); -+ regtail(g, ret, br); /* BRANCH -> BRANCH. */ -+ if (!(flags&HASWIDTH)) -+ *flagp &= ~HASWIDTH; -+ *flagp |= flags&SPSTART; -+ } -+ -+ /* Make a closing node, and hook it on the end. */ -+ ender = regnode(g, (paren) ? CLOSE+parno : END); -+ regtail(g, ret, ender); -+ -+ /* Hook the tails of the branches to the closing node. */ -+ for (br = ret; br != NULL; br = regnext(g, br)) -+ regoptail(g, br, ender); -+ -+ /* Check for proper termination. */ -+ if (paren && *g->regparse++ != ')') { -+ FAIL("unmatched ()"); -+ } else if (!paren && *g->regparse != '\0') { -+ if (*g->regparse == ')') { -+ FAIL("unmatched ()"); -+ } else -+ FAIL("junk on end"); /* "Can't happen". */ -+ /* NOTREACHED */ -+ } -+ -+ return(ret); -+} -+ -+/* -+ - regbranch - one alternative of an | operator -+ * -+ * Implements the concatenation operator. -+ */ -+static char * -+regbranch(struct match_globals *g, int *flagp) -+{ -+ register char *ret; -+ register char *chain; -+ register char *latest; -+ int flags; -+ -+ *flagp = WORST; /* Tentatively. */ -+ -+ ret = regnode(g, BRANCH); -+ chain = NULL; -+ while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') { -+ latest = regpiece(g, &flags); -+ if (latest == NULL) -+ return(NULL); -+ *flagp |= flags&HASWIDTH; -+ if (chain == NULL) /* First piece. */ -+ *flagp |= flags&SPSTART; -+ else -+ regtail(g, chain, latest); -+ chain = latest; -+ } -+ if (chain == NULL) /* Loop ran zero times. */ -+ (void) regnode(g, NOTHING); -+ -+ return(ret); -+} -+ -+/* -+ - regpiece - something followed by possible [*+?] -+ * -+ * Note that the branching code sequences used for ? and the general cases -+ * of * and + are somewhat optimized: they use the same NOTHING node as -+ * both the endmarker for their branch list and the body of the last branch. -+ * It might seem that this node could be dispensed with entirely, but the -+ * endmarker role is not redundant. -+ */ -+static char * -+regpiece(struct match_globals *g, int *flagp) -+{ -+ register char *ret; -+ register char op; -+ register char *next; -+ int flags; -+ -+ ret = regatom(g, &flags); -+ if (ret == NULL) -+ return(NULL); -+ -+ op = *g->regparse; -+ if (!ISMULT(op)) { -+ *flagp = flags; -+ return(ret); -+ } -+ -+ if (!(flags&HASWIDTH) && op != '?') -+ FAIL("*+ operand could be empty"); -+ *flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH); -+ -+ if (op == '*' && (flags&SIMPLE)) -+ reginsert(g, STAR, ret); -+ else if (op == '*') { -+ /* Emit x* as (x&|), where & means "self". */ -+ reginsert(g, BRANCH, ret); /* Either x */ -+ regoptail(g, ret, regnode(g, BACK)); /* and loop */ -+ regoptail(g, ret, ret); /* back */ -+ regtail(g, ret, regnode(g, BRANCH)); /* or */ -+ regtail(g, ret, regnode(g, NOTHING)); /* null. */ -+ } else if (op == '+' && (flags&SIMPLE)) -+ reginsert(g, PLUS, ret); -+ else if (op == '+') { -+ /* Emit x+ as x(&|), where & means "self". */ -+ next = regnode(g, BRANCH); /* Either */ -+ regtail(g, ret, next); -+ regtail(g, regnode(g, BACK), ret); /* loop back */ -+ regtail(g, next, regnode(g, BRANCH)); /* or */ -+ regtail(g, ret, regnode(g, NOTHING)); /* null. */ -+ } else if (op == '?') { -+ /* Emit x? as (x|) */ -+ reginsert(g, BRANCH, ret); /* Either x */ -+ regtail(g, ret, regnode(g, BRANCH)); /* or */ -+ next = regnode(g, NOTHING); /* null. */ -+ regtail(g, ret, next); -+ regoptail(g, ret, next); -+ } -+ g->regparse++; -+ if (ISMULT(*g->regparse)) -+ FAIL("nested *?+"); -+ -+ return(ret); -+} -+ -+/* -+ - regatom - the lowest level -+ * -+ * Optimization: gobbles an entire sequence of ordinary characters so that -+ * it can turn them into a single node, which is smaller to store and -+ * faster to run. Backslashed characters are exceptions, each becoming a -+ * separate node; the code is simpler that way and it's not worth fixing. -+ */ -+static char * -+regatom(struct match_globals *g, int *flagp) -+{ -+ register char *ret; -+ int flags; -+ -+ *flagp = WORST; /* Tentatively. */ -+ -+ switch (*g->regparse++) { -+ case '^': -+ ret = regnode(g, BOL); -+ break; -+ case '$': -+ ret = regnode(g, EOL); -+ break; -+ case '.': -+ ret = regnode(g, ANY); -+ *flagp |= HASWIDTH|SIMPLE; -+ break; -+ case '[': { -+ register int class; -+ register int classend; -+ -+ if (*g->regparse == '^') { /* Complement of range. */ -+ ret = regnode(g, ANYBUT); -+ g->regparse++; -+ } else -+ ret = regnode(g, ANYOF); -+ if (*g->regparse == ']' || *g->regparse == '-') -+ regc(g, *g->regparse++); -+ while (*g->regparse != '\0' && *g->regparse != ']') { -+ if (*g->regparse == '-') { -+ g->regparse++; -+ if (*g->regparse == ']' || *g->regparse == '\0') -+ regc(g, '-'); -+ else { -+ class = UCHARAT(g->regparse-2)+1; -+ classend = UCHARAT(g->regparse); -+ if (class > classend+1) -+ FAIL("invalid [] range"); -+ for (; class <= classend; class++) -+ regc(g, class); -+ g->regparse++; -+ } -+ } else -+ regc(g, *g->regparse++); -+ } -+ regc(g, '\0'); -+ if (*g->regparse != ']') -+ FAIL("unmatched []"); -+ g->regparse++; -+ *flagp |= HASWIDTH|SIMPLE; -+ } -+ break; -+ case '(': -+ ret = reg(g, 1, &flags); -+ if (ret == NULL) -+ return(NULL); -+ *flagp |= flags&(HASWIDTH|SPSTART); -+ break; -+ case '\0': -+ case '|': -+ case ')': -+ FAIL("internal urp"); /* Supposed to be caught earlier. */ -+ break; -+ case '?': -+ case '+': -+ case '*': -+ FAIL("?+* follows nothing"); -+ break; -+ case '\\': -+ if (*g->regparse == '\0') -+ FAIL("trailing \\"); -+ ret = regnode(g, EXACTLY); -+ regc(g, *g->regparse++); -+ regc(g, '\0'); -+ *flagp |= HASWIDTH|SIMPLE; -+ break; -+ default: { -+ register int len; -+ register char ender; -+ -+ g->regparse--; -+ len = my_strcspn((const char *)g->regparse, (const char *)META); -+ if (len <= 0) -+ FAIL("internal disaster"); -+ ender = *(g->regparse+len); -+ if (len > 1 && ISMULT(ender)) -+ len--; /* Back off clear of ?+* operand. */ -+ *flagp |= HASWIDTH; -+ if (len == 1) -+ *flagp |= SIMPLE; -+ ret = regnode(g, EXACTLY); -+ while (len > 0) { -+ regc(g, *g->regparse++); -+ len--; -+ } -+ regc(g, '\0'); -+ } -+ break; -+ } -+ -+ return(ret); -+} -+ -+/* -+ - regnode - emit a node -+ */ -+static char * /* Location. */ -+regnode(struct match_globals *g, char op) -+{ -+ register char *ret; -+ register char *ptr; -+ -+ ret = g->regcode; -+ if (ret == &g->regdummy) { -+ g->regsize += 3; -+ return(ret); -+ } -+ -+ ptr = ret; -+ *ptr++ = op; -+ *ptr++ = '\0'; /* Null "next" pointer. */ -+ *ptr++ = '\0'; -+ g->regcode = ptr; -+ -+ return(ret); -+} -+ -+/* -+ - regc - emit (if appropriate) a byte of code -+ */ -+static void -+regc(struct match_globals *g, char b) -+{ -+ if (g->regcode != &g->regdummy) -+ *g->regcode++ = b; -+ else -+ g->regsize++; -+} -+ -+/* -+ - reginsert - insert an operator in front of already-emitted operand -+ * -+ * Means relocating the operand. -+ */ -+static void -+reginsert(struct match_globals *g, char op, char* opnd) -+{ -+ register char *src; -+ register char *dst; -+ register char *place; -+ -+ if (g->regcode == &g->regdummy) { -+ g->regsize += 3; -+ return; -+ } -+ -+ src = g->regcode; -+ g->regcode += 3; -+ dst = g->regcode; -+ while (src > opnd) -+ *--dst = *--src; -+ -+ place = opnd; /* Op node, where operand used to be. */ -+ *place++ = op; -+ *place++ = '\0'; -+ *place++ = '\0'; -+} -+ -+/* -+ - regtail - set the next-pointer at the end of a node chain -+ */ -+static void -+regtail(struct match_globals *g, char *p, char *val) -+{ -+ register char *scan; -+ register char *temp; -+ register int offset; -+ -+ if (p == &g->regdummy) -+ return; -+ -+ /* Find last node. */ -+ scan = p; -+ for (;;) { -+ temp = regnext(g, scan); -+ if (temp == NULL) -+ break; -+ scan = temp; -+ } -+ -+ if (OP(scan) == BACK) -+ offset = scan - val; -+ else -+ offset = val - scan; -+ *(scan+1) = (offset>>8)&0377; -+ *(scan+2) = offset&0377; -+} -+ -+/* -+ - regoptail - regtail on operand of first argument; nop if operandless -+ */ -+static void -+regoptail(struct match_globals *g, char *p, char *val) -+{ -+ /* "Operandless" and "op != BRANCH" are synonymous in practice. */ -+ if (p == NULL || p == &g->regdummy || OP(p) != BRANCH) -+ return; -+ regtail(g, OPERAND(p), val); -+} -+ -+/* -+ * regexec and friends -+ */ -+ -+ -+/* -+ * Forwards. -+ */ -+STATIC int regtry(struct match_globals *g, regexp *prog, char *string); -+STATIC int regmatch(struct match_globals *g, char *prog); -+STATIC int regrepeat(struct match_globals *g, char *p); -+ -+#ifdef DEBUG -+int regnarrate = 0; -+void regdump(); -+STATIC char *regprop(char *op); -+#endif -+ -+/* -+ - regexec - match a regexp against a string -+ */ -+int -+regexec(regexp *prog, char *string) -+{ -+ register char *s; -+ struct match_globals g; -+ -+ /* Be paranoid... */ -+ if (prog == NULL || string == NULL) { -+ printk("<3>Regexp: NULL parameter\n"); -+ return(0); -+ } -+ -+ /* Check validity of program. */ -+ if (UCHARAT(prog->program) != MAGIC) { -+ printk("<3>Regexp: corrupted program\n"); -+ return(0); -+ } -+ -+ /* If there is a "must appear" string, look for it. */ -+ if (prog->regmust != NULL) { -+ s = string; -+ while ((s = strchr(s, prog->regmust[0])) != NULL) { -+ if (strncmp(s, prog->regmust, prog->regmlen) == 0) -+ break; /* Found it. */ -+ s++; -+ } -+ if (s == NULL) /* Not present. */ -+ return(0); -+ } -+ -+ /* Mark beginning of line for ^ . */ -+ g.regbol = string; -+ -+ /* Simplest case: anchored match need be tried only once. */ -+ if (prog->reganch) -+ return(regtry(&g, prog, string)); -+ -+ /* Messy cases: unanchored match. */ -+ s = string; -+ if (prog->regstart != '\0') -+ /* We know what char it must start with. */ -+ while ((s = strchr(s, prog->regstart)) != NULL) { -+ if (regtry(&g, prog, s)) -+ return(1); -+ s++; -+ } -+ else -+ /* We don't -- general case. */ -+ do { -+ if (regtry(&g, prog, s)) -+ return(1); -+ } while (*s++ != '\0'); -+ -+ /* Failure. */ -+ return(0); -+} -+ -+/* -+ - regtry - try match at specific point -+ */ -+static int /* 0 failure, 1 success */ -+regtry(struct match_globals *g, regexp *prog, char *string) -+{ -+ register int i; -+ register char **sp; -+ register char **ep; -+ -+ g->reginput = string; -+ g->regstartp = prog->startp; -+ g->regendp = prog->endp; -+ -+ sp = prog->startp; -+ ep = prog->endp; -+ for (i = NSUBEXP; i > 0; i--) { -+ *sp++ = NULL; -+ *ep++ = NULL; -+ } -+ if (regmatch(g, prog->program + 1)) { -+ prog->startp[0] = string; -+ prog->endp[0] = g->reginput; -+ return(1); -+ } else -+ return(0); -+} -+ -+/* -+ - regmatch - main matching routine -+ * -+ * Conceptually the strategy is simple: check to see whether the current -+ * node matches, call self recursively to see whether the rest matches, -+ * and then act accordingly. In practice we make some effort to avoid -+ * recursion, in particular by going through "ordinary" nodes (that don't -+ * need to know whether the rest of the match failed) by a loop instead of -+ * by recursion. -+ */ -+static int /* 0 failure, 1 success */ -+regmatch(struct match_globals *g, char *prog) -+{ -+ register char *scan = prog; /* Current node. */ -+ char *next; /* Next node. */ -+ -+#ifdef DEBUG -+ if (scan != NULL && regnarrate) -+ fprintf(stderr, "%s(\n", regprop(scan)); -+#endif -+ while (scan != NULL) { -+#ifdef DEBUG -+ if (regnarrate) -+ fprintf(stderr, "%s...\n", regprop(scan)); -+#endif -+ next = regnext(g, scan); -+ -+ switch (OP(scan)) { -+ case BOL: -+ if (g->reginput != g->regbol) -+ return(0); -+ break; -+ case EOL: -+ if (*g->reginput != '\0') -+ return(0); -+ break; -+ case ANY: -+ if (*g->reginput == '\0') -+ return(0); -+ g->reginput++; -+ break; -+ case EXACTLY: { -+ register int len; -+ register char *opnd; -+ -+ opnd = OPERAND(scan); -+ /* Inline the first character, for speed. */ -+ if (*opnd != *g->reginput) -+ return(0); -+ len = strlen(opnd); -+ if (len > 1 && strncmp(opnd, g->reginput, len) != 0) -+ return(0); -+ g->reginput += len; -+ } -+ break; -+ case ANYOF: -+ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL) -+ return(0); -+ g->reginput++; -+ break; -+ case ANYBUT: -+ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL) -+ return(0); -+ g->reginput++; -+ break; -+ case NOTHING: -+ case BACK: -+ break; -+ case OPEN+1: -+ case OPEN+2: -+ case OPEN+3: -+ case OPEN+4: -+ case OPEN+5: -+ case OPEN+6: -+ case OPEN+7: -+ case OPEN+8: -+ case OPEN+9: { -+ register int no; -+ register char *save; -+ -+ no = OP(scan) - OPEN; -+ save = g->reginput; -+ -+ if (regmatch(g, next)) { -+ /* -+ * Don't set startp if some later -+ * invocation of the same parentheses -+ * already has. -+ */ -+ if (g->regstartp[no] == NULL) -+ g->regstartp[no] = save; -+ return(1); -+ } else -+ return(0); -+ } -+ break; -+ case CLOSE+1: -+ case CLOSE+2: -+ case CLOSE+3: -+ case CLOSE+4: -+ case CLOSE+5: -+ case CLOSE+6: -+ case CLOSE+7: -+ case CLOSE+8: -+ case CLOSE+9: -+ { -+ register int no; -+ register char *save; -+ -+ no = OP(scan) - CLOSE; -+ save = g->reginput; -+ -+ if (regmatch(g, next)) { -+ /* -+ * Don't set endp if some later -+ * invocation of the same parentheses -+ * already has. -+ */ -+ if (g->regendp[no] == NULL) -+ g->regendp[no] = save; -+ return(1); -+ } else -+ return(0); -+ } -+ break; -+ case BRANCH: { -+ register char *save; -+ -+ if (OP(next) != BRANCH) /* No choice. */ -+ next = OPERAND(scan); /* Avoid recursion. */ -+ else { -+ do { -+ save = g->reginput; -+ if (regmatch(g, OPERAND(scan))) -+ return(1); -+ g->reginput = save; -+ scan = regnext(g, scan); -+ } while (scan != NULL && OP(scan) == BRANCH); -+ return(0); -+ /* NOTREACHED */ -+ } -+ } -+ break; -+ case STAR: -+ case PLUS: { -+ register char nextch; -+ register int no; -+ register char *save; -+ register int min; -+ -+ /* -+ * Lookahead to avoid useless match attempts -+ * when we know what character comes next. -+ */ -+ nextch = '\0'; -+ if (OP(next) == EXACTLY) -+ nextch = *OPERAND(next); -+ min = (OP(scan) == STAR) ? 0 : 1; -+ save = g->reginput; -+ no = regrepeat(g, OPERAND(scan)); -+ while (no >= min) { -+ /* If it could work, try it. */ -+ if (nextch == '\0' || *g->reginput == nextch) -+ if (regmatch(g, next)) -+ return(1); -+ /* Couldn't or didn't -- back up. */ -+ no--; -+ g->reginput = save + no; -+ } -+ return(0); -+ } -+ break; -+ case END: -+ return(1); /* Success! */ -+ break; -+ default: -+ printk("<3>Regexp: memory corruption\n"); -+ return(0); -+ break; -+ } -+ -+ scan = next; -+ } -+ -+ /* -+ * We get here only if there's trouble -- normally "case END" is -+ * the terminating point. -+ */ -+ printk("<3>Regexp: corrupted pointers\n"); -+ return(0); -+} -+ -+/* -+ - regrepeat - repeatedly match something simple, report how many -+ */ -+static int -+regrepeat(struct match_globals *g, char *p) -+{ -+ register int count = 0; -+ register char *scan; -+ register char *opnd; -+ -+ scan = g->reginput; -+ opnd = OPERAND(p); -+ switch (OP(p)) { -+ case ANY: -+ count = strlen(scan); -+ scan += count; -+ break; -+ case EXACTLY: -+ while (*opnd == *scan) { -+ count++; -+ scan++; -+ } -+ break; -+ case ANYOF: -+ while (*scan != '\0' && strchr(opnd, *scan) != NULL) { -+ count++; -+ scan++; -+ } -+ break; -+ case ANYBUT: -+ while (*scan != '\0' && strchr(opnd, *scan) == NULL) { -+ count++; -+ scan++; -+ } -+ break; -+ default: /* Oh dear. Called inappropriately. */ -+ printk("<3>Regexp: internal foulup\n"); -+ count = 0; /* Best compromise. */ -+ break; -+ } -+ g->reginput = scan; -+ -+ return(count); -+} -+ -+/* -+ - regnext - dig the "next" pointer out of a node -+ */ -+static char* -+regnext(struct match_globals *g, char *p) -+{ -+ register int offset; -+ -+ if (p == &g->regdummy) -+ return(NULL); -+ -+ offset = NEXT(p); -+ if (offset == 0) -+ return(NULL); -+ -+ if (OP(p) == BACK) -+ return(p-offset); -+ else -+ return(p+offset); -+} -+ -+#ifdef DEBUG -+ -+STATIC char *regprop(); -+ -+/* -+ - regdump - dump a regexp onto stdout in vaguely comprehensible form -+ */ -+void -+regdump(regexp *r) -+{ -+ register char *s; -+ register char op = EXACTLY; /* Arbitrary non-END op. */ -+ register char *next; -+ /* extern char *strchr(); */ -+ -+ -+ s = r->program + 1; -+ while (op != END) { /* While that wasn't END last time... */ -+ op = OP(s); -+ printf("%2d%s", s-r->program, regprop(s)); /* Where, what. */ -+ next = regnext(s); -+ if (next == NULL) /* Next ptr. */ -+ printf("(0)"); -+ else -+ printf("(%d)", (s-r->program)+(next-s)); -+ s += 3; -+ if (op == ANYOF || op == ANYBUT || op == EXACTLY) { -+ /* Literal string, where present. */ -+ while (*s != '\0') { -+ putchar(*s); -+ s++; -+ } -+ s++; -+ } -+ putchar('\n'); -+ } -+ -+ /* Header fields of interest. */ -+ if (r->regstart != '\0') -+ printf("start `%c' ", r->regstart); -+ if (r->reganch) -+ printf("anchored "); -+ if (r->regmust != NULL) -+ printf("must have \"%s\"", r->regmust); -+ printf("\n"); -+} -+ -+/* -+ - regprop - printable representation of opcode -+ */ -+static char * -+regprop(char *op) -+{ -+#define BUFLEN 50 -+ register char *p; -+ static char buf[BUFLEN]; -+ -+ strcpy(buf, ":"); -+ -+ switch (OP(op)) { -+ case BOL: -+ p = "BOL"; -+ break; -+ case EOL: -+ p = "EOL"; -+ break; -+ case ANY: -+ p = "ANY"; -+ break; -+ case ANYOF: -+ p = "ANYOF"; -+ break; -+ case ANYBUT: -+ p = "ANYBUT"; -+ break; -+ case BRANCH: -+ p = "BRANCH"; -+ break; -+ case EXACTLY: -+ p = "EXACTLY"; -+ break; -+ case NOTHING: -+ p = "NOTHING"; -+ break; -+ case BACK: -+ p = "BACK"; -+ break; -+ case END: -+ p = "END"; -+ break; -+ case OPEN+1: -+ case OPEN+2: -+ case OPEN+3: -+ case OPEN+4: -+ case OPEN+5: -+ case OPEN+6: -+ case OPEN+7: -+ case OPEN+8: -+ case OPEN+9: -+ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN); -+ p = NULL; -+ break; -+ case CLOSE+1: -+ case CLOSE+2: -+ case CLOSE+3: -+ case CLOSE+4: -+ case CLOSE+5: -+ case CLOSE+6: -+ case CLOSE+7: -+ case CLOSE+8: -+ case CLOSE+9: -+ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE); -+ p = NULL; -+ break; -+ case STAR: -+ p = "STAR"; -+ break; -+ case PLUS: -+ p = "PLUS"; -+ break; -+ default: -+ printk("<3>Regexp: corrupted opcode\n"); -+ break; -+ } -+ if (p != NULL) -+ strncat(buf, p, BUFLEN-strlen(buf)); -+ return(buf); -+} -+#endif -+ -+ -diff -urN linux.old/net/ipv4/netfilter/regexp/regexp.h linux.dev/net/ipv4/netfilter/regexp/regexp.h ---- linux.old/net/ipv4/netfilter/regexp/regexp.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/net/ipv4/netfilter/regexp/regexp.h 2007-01-01 05:18:48.000000000 +0100 -@@ -0,0 +1,41 @@ -+/* -+ * Definitions etc. for regexp(3) routines. -+ * -+ * Caveat: this is V8 regexp(3) [actually, a reimplementation thereof], -+ * not the System V one. -+ */ -+ -+#ifndef REGEXP_H -+#define REGEXP_H -+ -+ -+/* -+http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h , -+which contains a version of this library, says: -+ -+ * -+ * NSUBEXP must be at least 10, and no greater than 117 or the parser -+ * will not work properly. -+ * -+ -+However, it looks rather like this library is limited to 10. If you think -+otherwise, let us know. -+*/ -+ -+#define NSUBEXP 10 -+typedef struct regexp { -+ char *startp[NSUBEXP]; -+ char *endp[NSUBEXP]; -+ char regstart; /* Internal use only. */ -+ char reganch; /* Internal use only. */ -+ char *regmust; /* Internal use only. */ -+ int regmlen; /* Internal use only. */ -+ char program[1]; /* Unwarranted chumminess with compiler. */ -+} regexp; -+ -+regexp * regcomp(char *exp, int *patternsize); -+int regexec(regexp *prog, char *string); -+void regsub(regexp *prog, char *source, char *dest); -+void regerror(char *s); -+ -+#endif -diff -urN linux.old/net/ipv4/netfilter/regexp/regmagic.h linux.dev/net/ipv4/netfilter/regexp/regmagic.h ---- linux.old/net/ipv4/netfilter/regexp/regmagic.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/net/ipv4/netfilter/regexp/regmagic.h 2007-01-01 05:18:48.000000000 +0100 -@@ -0,0 +1,5 @@ -+/* -+ * The first byte of the regexp internal "program" is actually this magic -+ * number; the start node begins in the second byte. -+ */ -+#define MAGIC 0234 -diff -urN linux.old/net/ipv4/netfilter/regexp/regsub.c linux.dev/net/ipv4/netfilter/regexp/regsub.c ---- linux.old/net/ipv4/netfilter/regexp/regsub.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/net/ipv4/netfilter/regexp/regsub.c 2007-01-01 05:18:48.000000000 +0100 -@@ -0,0 +1,95 @@ -+/* -+ * regsub -+ * @(#)regsub.c 1.3 of 2 April 86 -+ * -+ * Copyright (c) 1986 by University of Toronto. -+ * Written by Henry Spencer. Not derived from licensed software. -+ * -+ * Permission is granted to anyone to use this software for any -+ * purpose on any computer system, and to redistribute it freely, -+ * subject to the following restrictions: -+ * -+ * 1. The author is not responsible for the consequences of use of -+ * this software, no matter how awful, even if they arise -+ * from defects in it. -+ * -+ * 2. The origin of this software must not be misrepresented, either -+ * by explicit claim or by omission. -+ * -+ * 3. Altered versions must be plainly marked as such, and must not -+ * be misrepresented as being the original software. -+ * -+ * -+ * This code was modified by Ethan Sommer to work within the kernel -+ * (it now uses kmalloc etc..) -+ * -+ */ -+#include "regexp.h" -+#include "regmagic.h" -+#include -+ -+ -+#ifndef CHARBITS -+#define UCHARAT(p) ((int)*(unsigned char *)(p)) -+#else -+#define UCHARAT(p) ((int)*(p)&CHARBITS) -+#endif -+ -+#if 0 -+//void regerror(char * s) -+//{ -+// printk("regexp(3): %s", s); -+// /* NOTREACHED */ -+//} -+#endif -+ -+/* -+ - regsub - perform substitutions after a regexp match -+ */ -+void -+regsub(regexp * prog, char * source, char * dest) -+{ -+ register char *src; -+ register char *dst; -+ register char c; -+ register int no; -+ register int len; -+ -+ /* Not necessary and gcc doesn't like it -MLS */ -+ /*extern char *strncpy();*/ -+ -+ if (prog == NULL || source == NULL || dest == NULL) { -+ regerror("NULL parm to regsub"); -+ return; -+ } -+ if (UCHARAT(prog->program) != MAGIC) { -+ regerror("damaged regexp fed to regsub"); -+ return; -+ } -+ -+ src = source; -+ dst = dest; -+ while ((c = *src++) != '\0') { -+ if (c == '&') -+ no = 0; -+ else if (c == '\\' && '0' <= *src && *src <= '9') -+ no = *src++ - '0'; -+ else -+ no = -1; -+ -+ if (no < 0) { /* Ordinary character. */ -+ if (c == '\\' && (*src == '\\' || *src == '&')) -+ c = *src++; -+ *dst++ = c; -+ } else if (prog->startp[no] != NULL && prog->endp[no] != NULL) { -+ len = prog->endp[no] - prog->startp[no]; -+ (void) strncpy(dst, prog->startp[no], len); -+ dst += len; -+ if (len != 0 && *(dst-1) == '\0') { /* strncpy hit NUL. */ -+ regerror("damaged match string"); -+ return; -+ } -+ } -+ } -+ *dst++ = '\0'; -+} diff --git a/target/linux/etrax/patches/generic_2.6/101-netfilter_layer7_pktmatch.patch b/target/linux/etrax/patches/generic_2.6/101-netfilter_layer7_pktmatch.patch deleted file mode 100644 index 3d1e4819d6..0000000000 --- a/target/linux/etrax/patches/generic_2.6/101-netfilter_layer7_pktmatch.patch +++ /dev/null @@ -1,108 +0,0 @@ -diff -ur linux.dev/include/linux/netfilter_ipv4/ipt_layer7.h linux.dev2/include/linux/netfilter_ipv4/ipt_layer7.h ---- linux.dev/include/linux/netfilter_ipv4/ipt_layer7.h 2007-01-01 05:18:48.000000000 +0100 -+++ linux.dev2/include/linux/netfilter_ipv4/ipt_layer7.h 2007-01-01 05:30:46.000000000 +0100 -@@ -21,6 +21,7 @@ - char protocol[MAX_PROTOCOL_LEN]; - char invert:1; - char pattern[MAX_PATTERN_LEN]; -+ char pkt; - }; - - #endif /* _IPT_LAYER7_H */ -diff -ur linux.dev/net/ipv4/netfilter/ipt_layer7.c linux.dev2/net/ipv4/netfilter/ipt_layer7.c ---- linux.dev/net/ipv4/netfilter/ipt_layer7.c 2007-01-01 05:18:48.000000000 +0100 -+++ linux.dev2/net/ipv4/netfilter/ipt_layer7.c 2007-01-01 05:30:46.000000000 +0100 -@@ -296,33 +296,34 @@ - } - } - --/* add the new app data to the conntrack. Return number of bytes added. */ --static int add_data(struct ip_conntrack * master_conntrack, -- char * app_data, int appdatalen) -+static int add_datastr(char *target, int offset, char *app_data, int len) - { - int length = 0, i; -- int oldlength = master_conntrack->layer7.app_data_len; -- -- // This is a fix for a race condition by Deti Fliegl. However, I'm not -- // clear on whether the race condition exists or whether this really -- // fixes it. I might just be being dense... Anyway, if it's not really -- // a fix, all it does is waste a very small amount of time. -- if(!master_conntrack->layer7.app_data) return 0; -+ if(!target) return 0; - - /* Strip nulls. Make everything lower case (our regex lib doesn't - do case insensitivity). Add it to the end of the current data. */ -- for(i = 0; i < maxdatalen-oldlength-1 && -- i < appdatalen; i++) { -+ for(i = 0; i < maxdatalen-offset-1 && i < len; i++) { - if(app_data[i] != '\0') { -- master_conntrack->layer7.app_data[length+oldlength] = -+ target[length+offset] = - /* the kernel version of tolower mungs 'upper ascii' */ - isascii(app_data[i])? tolower(app_data[i]) : app_data[i]; - length++; - } - } -+ target[length+offset] = '\0'; - -- master_conntrack->layer7.app_data[length+oldlength] = '\0'; -- master_conntrack->layer7.app_data_len = length + oldlength; -+ return length; -+} -+ -+/* add the new app data to the conntrack. Return number of bytes added. */ -+static int add_data(struct ip_conntrack * master_conntrack, -+ char * app_data, int appdatalen) -+{ -+ int length; -+ -+ length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen); -+ master_conntrack->layer7.app_data_len += length; - - return length; - } -@@ -339,7 +340,7 @@ - struct ipt_layer7_info * info = (struct ipt_layer7_info *)matchinfo; - enum ip_conntrack_info master_ctinfo, ctinfo; - struct ip_conntrack *master_conntrack, *conntrack; -- unsigned char * app_data; -+ unsigned char *app_data, *tmp_data; - unsigned int pattern_result, appdatalen; - regexp * comppattern; - -@@ -362,8 +363,8 @@ - master_conntrack = master_ct(master_conntrack); - - /* if we've classified it or seen too many packets */ -- if(TOTAL_PACKETS > num_packets || -- master_conntrack->layer7.app_proto) { -+ if(!info->pkt && (TOTAL_PACKETS > num_packets || -+ master_conntrack->layer7.app_proto)) { - - pattern_result = match_no_append(conntrack, master_conntrack, ctinfo, master_ctinfo, info); - -@@ -394,6 +395,23 @@ - comppattern = compile_and_cache(info->pattern, info->protocol); - spin_unlock_bh(&list_lock); - -+ if (info->pkt) { -+ tmp_data = kmalloc(maxdatalen, GFP_ATOMIC); -+ if(!tmp_data){ -+ if (net_ratelimit()) -+ printk(KERN_ERR "layer7: out of memory in match, bailing.\n"); -+ return info->invert; -+ } -+ -+ tmp_data[0] = '\0'; -+ add_datastr(tmp_data, 0, app_data, appdatalen); -+ pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0); -+ kfree(tmp_data); -+ tmp_data = NULL; -+ -+ return (pattern_result ^ info->invert); -+ } -+ - /* On the first packet of a connection, allocate space for app data */ - write_lock(&ct_lock); - if(TOTAL_PACKETS == 1 && !skb->cb[0] && !master_conntrack->layer7.app_data) { diff --git a/target/linux/etrax/patches/generic_2.6/110-ipp2p_0.8.1rc1.patch b/target/linux/etrax/patches/generic_2.6/110-ipp2p_0.8.1rc1.patch deleted file mode 100644 index e03f4d5676..0000000000 --- a/target/linux/etrax/patches/generic_2.6/110-ipp2p_0.8.1rc1.patch +++ /dev/null @@ -1,948 +0,0 @@ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ipt_ipp2p.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ipt_ipp2p.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ipt_ipp2p.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ipt_ipp2p.h 2006-12-14 03:13:39.000000000 +0100 -@@ -0,0 +1,31 @@ -+#ifndef __IPT_IPP2P_H -+#define __IPT_IPP2P_H -+#define IPP2P_VERSION "0.8.1_rc1" -+ -+struct ipt_p2p_info { -+ int cmd; -+ int debug; -+}; -+ -+#endif //__IPT_IPP2P_H -+ -+#define SHORT_HAND_IPP2P 1 /* --ipp2p switch*/ -+//#define SHORT_HAND_DATA 4 /* --ipp2p-data switch*/ -+#define SHORT_HAND_NONE 5 /* no short hand*/ -+ -+#define IPP2P_EDK (1 << 1) -+#define IPP2P_DATA_KAZAA (1 << 2) -+#define IPP2P_DATA_EDK (1 << 3) -+#define IPP2P_DATA_DC (1 << 4) -+#define IPP2P_DC (1 << 5) -+#define IPP2P_DATA_GNU (1 << 6) -+#define IPP2P_GNU (1 << 7) -+#define IPP2P_KAZAA (1 << 8) -+#define IPP2P_BIT (1 << 9) -+#define IPP2P_APPLE (1 << 10) -+#define IPP2P_SOUL (1 << 11) -+#define IPP2P_WINMX (1 << 12) -+#define IPP2P_ARES (1 << 13) -+#define IPP2P_MUTE (1 << 14) -+#define IPP2P_WASTE (1 << 15) -+#define IPP2P_XDCC (1 << 16) -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ipt_ipp2p.c linux-2.6.19.dev/net/ipv4/netfilter/ipt_ipp2p.c ---- linux-2.6.19.old/net/ipv4/netfilter/ipt_ipp2p.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ipt_ipp2p.c 2006-12-14 03:13:39.000000000 +0100 -@@ -0,0 +1,881 @@ -+#if defined(MODVERSIONS) -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define get_u8(X,O) (*(__u8 *)(X + O)) -+#define get_u16(X,O) (*(__u16 *)(X + O)) -+#define get_u32(X,O) (*(__u32 *)(X + O)) -+ -+MODULE_AUTHOR("Eicke Friedrich/Klaus Degner "); -+MODULE_DESCRIPTION("An extension to iptables to identify P2P traffic."); -+MODULE_LICENSE("GPL"); -+ -+ -+/*Search for UDP eDonkey/eMule/Kad commands*/ -+int -+udp_search_edk (unsigned char *haystack, int packet_len) -+{ -+ unsigned char *t = haystack; -+ t += 8; -+ -+ switch (t[0]) { -+ case 0xe3: -+ { /*edonkey*/ -+ switch (t[1]) -+ { -+ /* client -> server status request */ -+ case 0x96: -+ if (packet_len == 14) return ((IPP2P_EDK * 100) + 50); -+ break; -+ /* server -> client status request */ -+ case 0x97: if (packet_len == 42) return ((IPP2P_EDK * 100) + 51); -+ break; -+ /* server description request */ -+ /* e3 2a ff f0 .. | size == 6 */ -+ case 0xa2: if ( (packet_len == 14) && ( get_u16(t,2) == __constant_htons(0xfff0) ) ) return ((IPP2P_EDK * 100) + 52); -+ break; -+ /* server description response */ -+ /* e3 a3 ff f0 .. | size > 40 && size < 200 */ -+ //case 0xa3: return ((IPP2P_EDK * 100) + 53); -+ // break; -+ case 0x9a: if (packet_len==26) return ((IPP2P_EDK * 100) + 54); -+ break; -+ -+ case 0x92: if (packet_len==18) return ((IPP2P_EDK * 100) + 55); -+ break; -+ } -+ break; -+ } -+ case 0xe4: -+ { -+ switch (t[1]) -+ { -+ /* e4 20 .. | size == 43 */ -+ case 0x20: if ((packet_len == 43) && (t[2] != 0x00) && (t[34] != 0x00)) return ((IPP2P_EDK * 100) + 60); -+ break; -+ /* e4 00 .. 00 | size == 35 ? */ -+ case 0x00: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 61); -+ break; -+ /* e4 10 .. 00 | size == 35 ? */ -+ case 0x10: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 62); -+ break; -+ /* e4 18 .. 00 | size == 35 ? */ -+ case 0x18: if ((packet_len == 35) && (t[26] == 0x00)) return ((IPP2P_EDK * 100) + 63); -+ break; -+ /* e4 52 .. | size = 44 */ -+ case 0x52: if (packet_len == 44 ) return ((IPP2P_EDK * 100) + 64); -+ break; -+ /* e4 58 .. | size == 6 */ -+ case 0x58: if (packet_len == 14 ) return ((IPP2P_EDK * 100) + 65); -+ break; -+ /* e4 59 .. | size == 2 */ -+ case 0x59: if (packet_len == 10 )return ((IPP2P_EDK * 100) + 66); -+ break; -+ /* e4 28 .. | packet_len == 52,77,102,127... */ -+ case 0x28: if (((packet_len-52) % 25) == 0) return ((IPP2P_EDK * 100) + 67); -+ break; -+ /* e4 50 xx xx | size == 4 */ -+ case 0x50: if (packet_len == 12) return ((IPP2P_EDK * 100) + 68); -+ break; -+ /* e4 40 xx xx | size == 48 */ -+ case 0x40: if (packet_len == 56) return ((IPP2P_EDK * 100) + 69); -+ break; -+ } -+ break; -+ } -+ } /* end of switch (t[0]) */ -+ return 0; -+}/*udp_search_edk*/ -+ -+ -+/*Search for UDP Gnutella commands*/ -+int -+udp_search_gnu (unsigned char *haystack, int packet_len) -+{ -+ unsigned char *t = haystack; -+ t += 8; -+ -+ if (memcmp(t, "GND", 3) == 0) return ((IPP2P_GNU * 100) + 51); -+ if (memcmp(t, "GNUTELLA ", 9) == 0) return ((IPP2P_GNU * 100) + 52); -+ return 0; -+}/*udp_search_gnu*/ -+ -+ -+/*Search for UDP KaZaA commands*/ -+int -+udp_search_kazaa (unsigned char *haystack, int packet_len) -+{ -+ unsigned char *t = haystack; -+ -+ if (t[packet_len-1] == 0x00){ -+ t += (packet_len - 6); -+ if (memcmp(t, "KaZaA", 5) == 0) return (IPP2P_KAZAA * 100 +50); -+ } -+ -+ return 0; -+}/*udp_search_kazaa*/ -+ -+/*Search for UDP DirectConnect commands*/ -+int -+udp_search_directconnect (unsigned char *haystack, int packet_len) -+{ -+ unsigned char *t = haystack; -+ if ((*(t + 8) == 0x24) && (*(t + packet_len - 1) == 0x7c)) { -+ t+=8; -+ if (memcmp(t, "SR ", 3) == 0) return ((IPP2P_DC * 100) + 60); -+ if (memcmp(t, "Ping ", 5) == 0) return ((IPP2P_DC * 100) + 61); -+ } -+ return 0; -+}/*udp_search_directconnect*/ -+ -+ -+ -+/*Search for UDP BitTorrent commands*/ -+int -+udp_search_bit (unsigned char *haystack, int packet_len) -+{ -+ switch(packet_len) -+ { -+ case 24: -+ /* ^ 00 00 04 17 27 10 19 80 */ -+ if ((ntohl(get_u32(haystack, 8)) == 0x00000417) && (ntohl(get_u32(haystack, 12)) == 0x27101980)) -+ return (IPP2P_BIT * 100 + 50); -+ break; -+ case 44: -+ if (get_u32(haystack, 16) == __constant_htonl(0x00000400) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) -+ return (IPP2P_BIT * 100 + 51); -+ if (get_u32(haystack, 16) == __constant_htonl(0x00000400)) -+ return (IPP2P_BIT * 100 + 61); -+ break; -+ case 65: -+ if (get_u32(haystack, 16) == __constant_htonl(0x00000404) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) -+ return (IPP2P_BIT * 100 + 52); -+ if (get_u32(haystack, 16) == __constant_htonl(0x00000404)) -+ return (IPP2P_BIT * 100 + 62); -+ break; -+ case 67: -+ if (get_u32(haystack, 16) == __constant_htonl(0x00000406) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) -+ return (IPP2P_BIT * 100 + 53); -+ if (get_u32(haystack, 16) == __constant_htonl(0x00000406)) -+ return (IPP2P_BIT * 100 + 63); -+ break; -+ case 211: -+ if (get_u32(haystack, 8) == __constant_htonl(0x00000405)) -+ return (IPP2P_BIT * 100 + 54); -+ break; -+ case 29: -+ if ((get_u32(haystack, 8) == __constant_htonl(0x00000401))) -+ return (IPP2P_BIT * 100 + 55); -+ break; -+ case 52: -+ if (get_u32(haystack,8) == __constant_htonl(0x00000827) && -+ get_u32(haystack,12) == __constant_htonl(0x37502950)) -+ return (IPP2P_BIT * 100 + 80); -+ break; -+ default: -+ /* this packet does not have a constant size */ -+ if (packet_len >= 40 && get_u32(haystack, 16) == __constant_htonl(0x00000402) && get_u32(haystack, 36) == __constant_htonl(0x00000104)) -+ return (IPP2P_BIT * 100 + 56); -+ break; -+ } -+ -+ /* some extra-bitcomet rules: -+ * "d1:" [a|r] "d2:id20:" -+ */ -+ if (packet_len > 30 && get_u8(haystack, 8) == 'd' && get_u8(haystack, 9) == '1' && get_u8(haystack, 10) == ':' ) -+ { -+ if (get_u8(haystack, 11) == 'a' || get_u8(haystack, 11) == 'r') -+ { -+ if (memcmp(haystack+12,"d2:id20:",8)==0) -+ return (IPP2P_BIT * 100 + 57); -+ } -+ } -+ -+#if 0 -+ /* bitlord rules */ -+ /* packetlen must be bigger than 40 */ -+ /* first 4 bytes are zero */ -+ if (packet_len > 40 && get_u32(haystack, 8) == 0x00000000) -+ { -+ /* first rule: 00 00 00 00 01 00 00 xx xx xx xx 00 00 00 00*/ -+ if (get_u32(haystack, 12) == 0x00000000 && -+ get_u32(haystack, 16) == 0x00010000 && -+ get_u32(haystack, 24) == 0x00000000 ) -+ return (IPP2P_BIT * 100 + 71); -+ -+ /* 00 01 00 00 0d 00 00 xx xx xx xx 00 00 00 00*/ -+ if (get_u32(haystack, 12) == 0x00000001 && -+ get_u32(haystack, 16) == 0x000d0000 && -+ get_u32(haystack, 24) == 0x00000000 ) -+ return (IPP2P_BIT * 100 + 71); -+ -+ -+ } -+#endif -+ -+ return 0; -+}/*udp_search_bit*/ -+ -+ -+ -+/*Search for Ares commands*/ -+//#define IPP2P_DEBUG_ARES -+int -+search_ares (const unsigned char *payload, const u16 plen) -+//int search_ares (unsigned char *haystack, int packet_len, int head_len) -+{ -+// const unsigned char *t = haystack + head_len; -+ -+ /* all ares packets start with */ -+ if (payload[1] == 0 && (plen - payload[0]) == 3) -+ { -+ switch (payload[2]) -+ { -+ case 0x5a: -+ /* ares connect */ -+ if ( plen == 6 && payload[5] == 0x05 ) return ((IPP2P_ARES * 100) + 1); -+ break; -+ case 0x09: -+ /* ares search, min 3 chars --> 14 bytes -+ * lets define a search can be up to 30 chars --> max 34 bytes -+ */ -+ if ( plen >= 14 && plen <= 34 ) return ((IPP2P_ARES * 100) + 1); -+ break; -+#ifdef IPP2P_DEBUG_ARES -+ default: -+ printk(KERN_DEBUG "Unknown Ares command %x recognized, len: %u \n", (unsigned int) payload[2],plen); -+#endif /* IPP2P_DEBUG_ARES */ -+ } -+ } -+ -+#if 0 -+ /* found connect packet: 03 00 5a 04 03 05 */ -+ /* new version ares 1.8: 03 00 5a xx xx 05 */ -+ if ((plen) == 6){ /* possible connect command*/ -+ if ((payload[0] == 0x03) && (payload[1] == 0x00) && (payload[2] == 0x5a) && (payload[5] == 0x05)) -+ return ((IPP2P_ARES * 100) + 1); -+ } -+ if ((plen) == 60){ /* possible download command*/ -+ if ((payload[59] == 0x0a) && (payload[58] == 0x0a)){ -+ if (memcmp(t, "PUSH SHA1:", 10) == 0) /* found download command */ -+ return ((IPP2P_ARES * 100) + 2); -+ } -+ } -+#endif -+ -+ return 0; -+} /*search_ares*/ -+ -+/*Search for SoulSeek commands*/ -+int -+search_soul (const unsigned char *payload, const u16 plen) -+{ -+//#define IPP2P_DEBUG_SOUL -+ /* match: xx xx xx xx | xx = sizeof(payload) - 4 */ -+ if (get_u32(payload, 0) == (plen - 4)){ -+ const __u32 m=get_u32(payload, 4); -+ /* match 00 yy yy 00, yy can be everything */ -+ if ( get_u8(payload, 4) == 0x00 && get_u8(payload, 7) == 0x00 ) -+ { -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "0: Soulseek command 0x%x recognized\n",get_u32(payload, 4)); -+#endif /* IPP2P_DEBUG_SOUL */ -+ return ((IPP2P_SOUL * 100) + 1); -+ } -+ -+ /* next match: 01 yy 00 00 | yy can be everything */ -+ if ( get_u8(payload, 4) == 0x01 && get_u16(payload, 6) == 0x0000 ) -+ { -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "1: Soulseek command 0x%x recognized\n",get_u16(payload, 4)); -+#endif /* IPP2P_DEBUG_SOUL */ -+ return ((IPP2P_SOUL * 100) + 2); -+ } -+ -+ /* other soulseek commandos are: 1-5,7,9,13-18,22,23,26,28,35-37,40-46,50,51,60,62-69,91,92,1001 */ -+ /* try to do this in an intelligent way */ -+ /* get all small commandos */ -+ switch(m) -+ { -+ case 7: -+ case 9: -+ case 22: -+ case 23: -+ case 26: -+ case 28: -+ case 50: -+ case 51: -+ case 60: -+ case 91: -+ case 92: -+ case 1001: -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "2: Soulseek command 0x%x recognized\n",get_u16(payload, 4)); -+#endif /* IPP2P_DEBUG_SOUL */ -+ return ((IPP2P_SOUL * 100) + 3); -+ } -+ -+ if (m > 0 && m < 6 ) -+ { -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "3: Soulseek command 0x%x recognized\n",get_u16(payload, 4)); -+#endif /* IPP2P_DEBUG_SOUL */ -+ return ((IPP2P_SOUL * 100) + 4); -+ } -+ if (m > 12 && m < 19 ) -+ { -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "4: Soulseek command 0x%x recognized\n",get_u16(payload, 4)); -+#endif /* IPP2P_DEBUG_SOUL */ -+ return ((IPP2P_SOUL * 100) + 5); -+ } -+ -+ if (m > 34 && m < 38 ) -+ { -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "5: Soulseek command 0x%x recognized\n",get_u16(payload, 4)); -+#endif /* IPP2P_DEBUG_SOUL */ -+ return ((IPP2P_SOUL * 100) + 6); -+ } -+ -+ if (m > 39 && m < 47 ) -+ { -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "6: Soulseek command 0x%x recognized\n",get_u16(payload, 4)); -+#endif /* IPP2P_DEBUG_SOUL */ -+ return ((IPP2P_SOUL * 100) + 7); -+ } -+ -+ if (m > 61 && m < 70 ) -+ { -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "7: Soulseek command 0x%x recognized\n",get_u16(payload, 4)); -+#endif /* IPP2P_DEBUG_SOUL */ -+ return ((IPP2P_SOUL * 100) + 8); -+ } -+ -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "unknown SOULSEEK command: 0x%x, first 16 bit: 0x%x, first 8 bit: 0x%x ,soulseek ???\n",get_u32(payload, 4),get_u16(payload, 4) >> 16,get_u8(payload, 4) >> 24); -+#endif /* IPP2P_DEBUG_SOUL */ -+ } -+ -+ /* match 14 00 00 00 01 yy 00 00 00 STRING(YY) 01 00 00 00 00 46|50 00 00 00 00 */ -+ /* without size at the beginning !!! */ -+ if ( get_u32(payload, 0) == 0x14 && get_u8(payload, 4) == 0x01 ) -+ { -+ __u32 y=get_u32(payload, 5); -+ /* we need 19 chars + string */ -+ if ( (y + 19) <= (plen) ) -+ { -+ const unsigned char *w=payload+9+y; -+ if (get_u32(w, 0) == 0x01 && ( get_u16(w, 4) == 0x4600 || get_u16(w, 4) == 0x5000) && get_u32(w, 6) == 0x00); -+#ifdef IPP2P_DEBUG_SOUL -+ printk(KERN_DEBUG "Soulssek special client command recognized\n"); -+#endif /* IPP2P_DEBUG_SOUL */ -+ return ((IPP2P_SOUL * 100) + 9); -+ } -+ } -+ return 0; -+} -+ -+ -+/*Search for WinMX commands*/ -+int -+search_winmx (const unsigned char *payload, const u16 plen) -+{ -+//#define IPP2P_DEBUG_WINMX -+ if (((plen) == 4) && (memcmp(payload, "SEND", 4) == 0)) return ((IPP2P_WINMX * 100) + 1); -+ if (((plen) == 3) && (memcmp(payload, "GET", 3) == 0)) return ((IPP2P_WINMX * 100) + 2); -+ //if (packet_len < (head_len + 10)) return 0; -+ if (plen < 10) return 0; -+ -+ if ((memcmp(payload, "SEND", 4) == 0) || (memcmp(payload, "GET", 3) == 0)){ -+ u16 c=4; -+ const u16 end=plen-2; -+ u8 count=0; -+ while (c < end) -+ { -+ if (payload[c]== 0x20 && payload[c+1] == 0x22) -+ { -+ c++; -+ count++; -+ if (count>=2) return ((IPP2P_WINMX * 100) + 3); -+ } -+ c++; -+ } -+ } -+ -+ if ( plen == 149 && payload[0] == '8' ) -+ { -+#ifdef IPP2P_DEBUG_WINMX -+ printk(KERN_INFO "maybe WinMX\n"); -+#endif -+ if (get_u32(payload,17) == 0 && get_u32(payload,21) == 0 && get_u32(payload,25) == 0 && -+// get_u32(payload,33) == __constant_htonl(0x71182b1a) && get_u32(payload,37) == __constant_htonl(0x05050000) && -+// get_u32(payload,133) == __constant_htonl(0x31097edf) && get_u32(payload,145) == __constant_htonl(0xdcb8f792)) -+ get_u16(payload,39) == 0 && get_u16(payload,135) == __constant_htons(0x7edf) && get_u16(payload,147) == __constant_htons(0xf792)) -+ -+ { -+#ifdef IPP2P_DEBUG_WINMX -+ printk(KERN_INFO "got WinMX\n"); -+#endif -+ return ((IPP2P_WINMX * 100) + 4); -+ } -+ } -+ return 0; -+} /*search_winmx*/ -+ -+ -+/*Search for appleJuice commands*/ -+int -+search_apple (const unsigned char *payload, const u16 plen) -+{ -+ if ( (plen > 7) && (payload[6] == 0x0d) && (payload[7] == 0x0a) && (memcmp(payload, "ajprot", 6) == 0)) return (IPP2P_APPLE * 100); -+ -+ return 0; -+} -+ -+ -+/*Search for BitTorrent commands*/ -+int -+search_bittorrent (const unsigned char *payload, const u16 plen) -+{ -+ if (plen > 20) -+ { -+ /* test for match 0x13+"BitTorrent protocol" */ -+ if (payload[0] == 0x13) -+ { -+ if (memcmp(payload+1, "BitTorrent protocol", 19) == 0) return (IPP2P_BIT * 100); -+ } -+ -+ /* get tracker commandos, all starts with GET / -+ * then it can follow: scrape| announce -+ * and then ?hash_info= -+ */ -+ if (memcmp(payload,"GET /",5) == 0) -+ { -+ /* message scrape */ -+ if ( memcmp(payload+5,"scrape?info_hash=",17)==0 ) return (IPP2P_BIT * 100 + 1); -+ /* message announce */ -+ if ( memcmp(payload+5,"announce?info_hash=",19)==0 ) return (IPP2P_BIT * 100 + 2); -+ } -+ } -+ else -+ { -+ /* bitcomet encryptes the first packet, so we have to detect another -+ * one later in the flow */ -+ /* first try failed, too many missdetections */ -+ //if ( size == 5 && get_u32(t,0) == __constant_htonl(1) && t[4] < 3) return (IPP2P_BIT * 100 + 3); -+ -+ /* second try: block request packets */ -+ if ( plen == 17 && get_u32(payload,0) == __constant_htonl(0x0d) && payload[4] == 0x06 && get_u32(payload,13) == __constant_htonl(0x4000) ) return (IPP2P_BIT * 100 + 3); -+ } -+ -+ return 0; -+} -+ -+ -+ -+/*check for Kazaa get command*/ -+int -+search_kazaa (const unsigned char *payload, const u16 plen) -+ -+{ -+ if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a) && memcmp(payload, "GET /.hash=", 11) == 0) -+ return (IPP2P_DATA_KAZAA * 100); -+ -+ return 0; -+} -+ -+ -+/*check for gnutella get command*/ -+int -+search_gnu (const unsigned char *payload, const u16 plen) -+{ -+ if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a)) -+ { -+ if (memcmp(payload, "GET /get/", 9) == 0) return ((IPP2P_DATA_GNU * 100) + 1); -+ if (memcmp(payload, "GET /uri-res/", 13) == 0) return ((IPP2P_DATA_GNU * 100) + 2); -+ } -+ return 0; -+} -+ -+ -+/*check for gnutella get commands and other typical data*/ -+int -+search_all_gnu (const unsigned char *payload, const u16 plen) -+{ -+ -+ if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a)) -+ { -+ -+ if (memcmp(payload, "GNUTELLA CONNECT/", 17) == 0) return ((IPP2P_GNU * 100) + 1); -+ if (memcmp(payload, "GNUTELLA/", 9) == 0) return ((IPP2P_GNU * 100) + 2); -+ -+ -+ if ((memcmp(payload, "GET /get/", 9) == 0) || (memcmp(payload, "GET /uri-res/", 13) == 0)) -+ { -+ u16 c=8; -+ const u16 end=plen-22; -+ while (c < end) { -+ if ( payload[c] == 0x0a && payload[c+1] == 0x0d && ((memcmp(&payload[c+2], "X-Gnutella-", 11) == 0) || (memcmp(&payload[c+2], "X-Queue:", 8) == 0))) -+ return ((IPP2P_GNU * 100) + 3); -+ c++; -+ } -+ } -+ } -+ return 0; -+} -+ -+ -+/*check for KaZaA download commands and other typical data*/ -+int -+search_all_kazaa (const unsigned char *payload, const u16 plen) -+{ -+ if ((payload[plen-2] == 0x0d) && (payload[plen-1] == 0x0a)) -+ { -+ -+ if (memcmp(payload, "GIVE ", 5) == 0) return ((IPP2P_KAZAA * 100) + 1); -+ -+ if (memcmp(payload, "GET /", 5) == 0) { -+ u16 c = 8; -+ const u16 end=plen-22; -+ while (c < end) { -+ if ( payload[c] == 0x0a && payload[c+1] == 0x0d && ((memcmp(&payload[c+2], "X-Kazaa-Username: ", 18) == 0) || (memcmp(&payload[c+2], "User-Agent: PeerEnabler/", 24) == 0))) -+ return ((IPP2P_KAZAA * 100) + 2); -+ c++; -+ } -+ } -+ } -+ return 0; -+} -+ -+/*fast check for edonkey file segment transfer command*/ -+int -+search_edk (const unsigned char *payload, const u16 plen) -+{ -+ if (payload[0] != 0xe3) -+ return 0; -+ else { -+ if (payload[5] == 0x47) -+ return (IPP2P_DATA_EDK * 100); -+ else -+ return 0; -+ } -+} -+ -+ -+ -+/*intensive but slower search for some edonkey packets including size-check*/ -+int -+search_all_edk (const unsigned char *payload, const u16 plen) -+{ -+ if (payload[0] != 0xe3) -+ return 0; -+ else { -+ //t += head_len; -+ const u16 cmd = get_u16(payload, 1); -+ if (cmd == (plen - 5)) { -+ switch (payload[5]) { -+ case 0x01: return ((IPP2P_EDK * 100) + 1); /*Client: hello or Server:hello*/ -+ case 0x4c: return ((IPP2P_EDK * 100) + 9); /*Client: Hello-Answer*/ -+ } -+ } -+ return 0; -+ } -+} -+ -+ -+/*fast check for Direct Connect send command*/ -+int -+search_dc (const unsigned char *payload, const u16 plen) -+{ -+ -+ if (payload[0] != 0x24 ) -+ return 0; -+ else { -+ if (memcmp(&payload[1], "Send|", 5) == 0) -+ return (IPP2P_DATA_DC * 100); -+ else -+ return 0; -+ } -+ -+} -+ -+ -+/*intensive but slower check for all direct connect packets*/ -+int -+search_all_dc (const unsigned char *payload, const u16 plen) -+{ -+// unsigned char *t = haystack; -+ -+ if (payload[0] == 0x24 && payload[plen-1] == 0x7c) -+ { -+ const unsigned char *t=&payload[1]; -+ /* Client-Hub-Protocol */ -+ if (memcmp(t, "Lock ", 5) == 0) return ((IPP2P_DC * 100) + 1); -+ /* Client-Client-Protocol, some are already recognized by client-hub (like lock) */ -+ if (memcmp(t, "MyNick ", 7) == 0) return ((IPP2P_DC * 100) + 38); -+ } -+ return 0; -+} -+ -+/*check for mute*/ -+int -+search_mute (const unsigned char *payload, const u16 plen) -+{ -+ if ( plen == 209 || plen == 345 || plen == 473 || plen == 609 || plen == 1121 ) -+ { -+ //printk(KERN_DEBUG "size hit: %u",size); -+ if (memcmp(payload,"PublicKey: ",11) == 0 ) -+ { -+ return ((IPP2P_MUTE * 100) + 0); -+ -+/* if (memcmp(t+size-14,"\x0aEndPublicKey\x0a",14) == 0) -+ { -+ printk(KERN_DEBUG "end pubic key hit: %u",size); -+ -+ }*/ -+ } -+ } -+ return 0; -+} -+ -+ -+/* check for xdcc */ -+int -+search_xdcc (const unsigned char *payload, const u16 plen) -+{ -+ /* search in small packets only */ -+ if (plen > 20 && plen < 200 && payload[plen-1] == 0x0a && payload[plen-2] == 0x0d && memcmp(payload,"PRIVMSG ",8) == 0) -+ { -+ -+ u16 x=10; -+ const u16 end=plen - 13; -+ -+ /* is seems to be a irc private massage, chedck for xdcc command */ -+ while (x < end) -+ { -+ if (payload[x] == ':') -+ { -+ if ( memcmp(&payload[x+1],"xdcc send #",11) == 0 ) -+ return ((IPP2P_XDCC * 100) + 0); -+ } -+ x++; -+ } -+ } -+ return 0; -+} -+ -+/* search for waste */ -+int search_waste(const unsigned char *payload, const u16 plen) -+{ -+ if ( plen >= 8 && memcmp(payload,"GET.sha1:",9) == 0) -+ return ((IPP2P_WASTE * 100) + 0); -+ -+ return 0; -+} -+ -+ -+static struct { -+ int command; -+ __u8 short_hand; /*for fucntions included in short hands*/ -+ int packet_len; -+ int (*function_name) (const unsigned char *, const u16); -+} matchlist[] = { -+ {IPP2P_EDK,SHORT_HAND_IPP2P,20, &search_all_edk}, -+// {IPP2P_DATA_KAZAA,SHORT_HAND_DATA,200, &search_kazaa}, -+// {IPP2P_DATA_EDK,SHORT_HAND_DATA,60, &search_edk}, -+// {IPP2P_DATA_DC,SHORT_HAND_DATA,26, &search_dc}, -+ {IPP2P_DC,SHORT_HAND_IPP2P,5, search_all_dc}, -+// {IPP2P_DATA_GNU,SHORT_HAND_DATA,40, &search_gnu}, -+ {IPP2P_GNU,SHORT_HAND_IPP2P,5, &search_all_gnu}, -+ {IPP2P_KAZAA,SHORT_HAND_IPP2P,5, &search_all_kazaa}, -+ {IPP2P_BIT,SHORT_HAND_IPP2P,20, &search_bittorrent}, -+ {IPP2P_APPLE,SHORT_HAND_IPP2P,5, &search_apple}, -+ {IPP2P_SOUL,SHORT_HAND_IPP2P,5, &search_soul}, -+ {IPP2P_WINMX,SHORT_HAND_IPP2P,2, &search_winmx}, -+ {IPP2P_ARES,SHORT_HAND_IPP2P,5, &search_ares}, -+ {IPP2P_MUTE,SHORT_HAND_NONE,200, &search_mute}, -+ {IPP2P_WASTE,SHORT_HAND_NONE,5, &search_waste}, -+ {IPP2P_XDCC,SHORT_HAND_NONE,5, &search_xdcc}, -+ {0,0,0,NULL} -+}; -+ -+ -+static struct { -+ int command; -+ __u8 short_hand; /*for fucntions included in short hands*/ -+ int packet_len; -+ int (*function_name) (unsigned char *, int); -+} udp_list[] = { -+ {IPP2P_KAZAA,SHORT_HAND_IPP2P,14, &udp_search_kazaa}, -+ {IPP2P_BIT,SHORT_HAND_IPP2P,23, &udp_search_bit}, -+ {IPP2P_GNU,SHORT_HAND_IPP2P,11, &udp_search_gnu}, -+ {IPP2P_EDK,SHORT_HAND_IPP2P,9, &udp_search_edk}, -+ {IPP2P_DC,SHORT_HAND_IPP2P,12, &udp_search_directconnect}, -+ {0,0,0,NULL} -+}; -+ -+ -+static int -+match(const struct sk_buff *skb, -+ const struct net_device *in, -+ const struct net_device *out, -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+ const struct xt_match *match, -+#endif -+ const void *matchinfo, -+ int offset, -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+ unsigned int protoff, -+#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ const void *hdr, -+ u_int16_t datalen, -+#endif -+ int *hotdrop) -+{ -+ const struct ipt_p2p_info *info = matchinfo; -+ unsigned char *haystack; -+ struct iphdr *ip = skb->nh.iph; -+ int p2p_result = 0, i = 0; -+// int head_len; -+ int hlen = ntohs(ip->tot_len)-(ip->ihl*4); /*hlen = packet-data length*/ -+ -+ /*must not be a fragment*/ -+ if (offset) { -+ if (info->debug) printk("IPP2P.match: offset found %i \n",offset); -+ return 0; -+ } -+ -+ /*make sure that skb is linear*/ -+ if(skb_is_nonlinear(skb)){ -+ if (info->debug) printk("IPP2P.match: nonlinear skb found\n"); -+ return 0; -+ } -+ -+ -+ haystack=(char *)ip+(ip->ihl*4); /*haystack = packet data*/ -+ -+ switch (ip->protocol){ -+ case IPPROTO_TCP: /*what to do with a TCP packet*/ -+ { -+ struct tcphdr *tcph = (void *) ip + ip->ihl * 4; -+ -+ if (tcph->fin) return 0; /*if FIN bit is set bail out*/ -+ if (tcph->syn) return 0; /*if SYN bit is set bail out*/ -+ if (tcph->rst) return 0; /*if RST bit is set bail out*/ -+ -+ haystack += tcph->doff * 4; /*get TCP-Header-Size*/ -+ hlen -= tcph->doff * 4; -+ while (matchlist[i].command) { -+ if ((((info->cmd & matchlist[i].command) == matchlist[i].command) || -+ ((info->cmd & matchlist[i].short_hand) == matchlist[i].short_hand)) && -+ (hlen > matchlist[i].packet_len)) { -+ p2p_result = matchlist[i].function_name(haystack, hlen); -+ if (p2p_result) -+ { -+ if (info->debug) printk("IPP2P.debug:TCP-match: %i from: %u.%u.%u.%u:%i to: %u.%u.%u.%u:%i Length: %i\n", -+ p2p_result, NIPQUAD(ip->saddr),ntohs(tcph->source), NIPQUAD(ip->daddr),ntohs(tcph->dest),hlen); -+ return p2p_result; -+ } -+ } -+ i++; -+ } -+ return p2p_result; -+ } -+ -+ case IPPROTO_UDP: /*what to do with an UDP packet*/ -+ { -+ struct udphdr *udph = (void *) ip + ip->ihl * 4; -+ -+ while (udp_list[i].command){ -+ if ((((info->cmd & udp_list[i].command) == udp_list[i].command) || -+ ((info->cmd & udp_list[i].short_hand) == udp_list[i].short_hand)) && -+ (hlen > udp_list[i].packet_len)) { -+ p2p_result = udp_list[i].function_name(haystack, hlen); -+ if (p2p_result){ -+ if (info->debug) printk("IPP2P.debug:UDP-match: %i from: %u.%u.%u.%u:%i to: %u.%u.%u.%u:%i Length: %i\n", -+ p2p_result, NIPQUAD(ip->saddr),ntohs(udph->source), NIPQUAD(ip->daddr),ntohs(udph->dest),hlen); -+ return p2p_result; -+ } -+ } -+ i++; -+ } -+ return p2p_result; -+ } -+ -+ default: return 0; -+ } -+} -+ -+ -+ -+static int -+checkentry(const char *tablename, -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+ const void *ip, -+ const struct xt_match *match, -+#else -+ const struct ipt_ip *ip, -+#endif -+ void *matchinfo, -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) -+ unsigned int matchsize, -+#endif -+ unsigned int hook_mask) -+{ -+ /* Must specify -p tcp */ -+/* if (ip->proto != IPPROTO_TCP || (ip->invflags & IPT_INV_PROTO)) { -+ * printk("ipp2p: Only works on TCP packets, use -p tcp\n"); -+ * return 0; -+ * }*/ -+ return 1; -+} -+ -+ -+ -+ -+static struct ipt_match ipp2p_match = { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ { NULL, NULL }, -+ "ipp2p", -+ &match, -+ &checkentry, -+ NULL, -+ THIS_MODULE -+#endif -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ .name = "ipp2p", -+ .match = &match, -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+ .matchsize = sizeof(struct ipt_p2p_info), -+#endif -+ .checkentry = &checkentry, -+ .me = THIS_MODULE, -+#endif -+}; -+ -+ -+static int __init init(void) -+{ -+ printk(KERN_INFO "IPP2P v%s loading\n", IPP2P_VERSION); -+ return ipt_register_match(&ipp2p_match); -+} -+ -+static void __exit fini(void) -+{ -+ ipt_unregister_match(&ipp2p_match); -+ printk(KERN_INFO "IPP2P v%s unloaded\n", IPP2P_VERSION); -+} -+ -+module_init(init); -+module_exit(fini); -+ -+ -diff -urN linux-2.6.19.old/net/ipv4/netfilter/Kconfig linux-2.6.19.dev/net/ipv4/netfilter/Kconfig ---- linux-2.6.19.old/net/ipv4/netfilter/Kconfig 2006-12-14 03:13:39.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/Kconfig 2006-12-14 03:13:39.000000000 +0100 -@@ -248,6 +248,12 @@ - - To compile it as a module, choose M here. If unsure, say N. - -+config IP_NF_MATCH_IPP2P -+ tristate "IPP2P" -+ depends on IP_NF_IPTABLES -+ help -+ Module for matching traffic of various Peer-to-Peer applications -+ - config IP_NF_MATCH_TOS - tristate "TOS match support" - depends on IP_NF_IPTABLES -diff -urN linux-2.6.19.old/net/ipv4/netfilter/Makefile linux-2.6.19.dev/net/ipv4/netfilter/Makefile ---- linux-2.6.19.old/net/ipv4/netfilter/Makefile 2006-12-14 03:13:39.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/Makefile 2006-12-14 03:13:39.000000000 +0100 -@@ -62,7 +62,7 @@ - obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o - obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o - obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ipt_addrtype.o -- -+obj-$(CONFIG_IP_NF_MATCH_IPP2P) += ipt_ipp2p.o - obj-$(CONFIG_IP_NF_MATCH_LAYER7) += ipt_layer7.o - - # targets diff --git a/target/linux/etrax/patches/generic_2.6/120-openswan-2.4.0.kernel-2.6-natt.patch b/target/linux/etrax/patches/generic_2.6/120-openswan-2.4.0.kernel-2.6-natt.patch deleted file mode 100644 index 2b4238c688..0000000000 --- a/target/linux/etrax/patches/generic_2.6/120-openswan-2.4.0.kernel-2.6-natt.patch +++ /dev/null @@ -1,171 +0,0 @@ -diff -urN linux-2.6.19.old/include/net/xfrmudp.h linux-2.6.19.dev/include/net/xfrmudp.h ---- linux-2.6.19.old/include/net/xfrmudp.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/net/xfrmudp.h 2006-12-14 03:13:41.000000000 +0100 -@@ -0,0 +1,10 @@ -+/* -+ * pointer to function for type that xfrm4_input wants, to permit -+ * decoupling of XFRM from udp.c -+ */ -+#define HAVE_XFRM4_UDP_REGISTER -+ -+typedef int (*xfrm4_rcv_encap_t)(struct sk_buff *skb, __u16 encap_type); -+extern int udp4_register_esp_rcvencap(xfrm4_rcv_encap_t func -+ , xfrm4_rcv_encap_t *oldfunc); -+extern int udp4_unregister_esp_rcvencap(xfrm4_rcv_encap_t func); -diff -urN linux-2.6.19.old/net/ipv4/Kconfig linux-2.6.19.dev/net/ipv4/Kconfig ---- linux-2.6.19.old/net/ipv4/Kconfig 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/Kconfig 2006-12-14 03:13:41.000000000 +0100 -@@ -273,6 +273,12 @@ - Network), but can be distributed all over the Internet. If you want - to do that, say Y here and to "IP multicast routing" below. - -+config IPSEC_NAT_TRAVERSAL -+ bool "IPSEC NAT-Traversal (KLIPS compatible)" -+ depends on INET -+ ---help--- -+ Includes support for RFC3947/RFC3948 NAT-Traversal of ESP over UDP. -+ - config IP_MROUTE - bool "IP: multicast routing" - depends on IP_MULTICAST -diff -urN linux-2.6.19.old/net/ipv4/udp.c linux-2.6.19.dev/net/ipv4/udp.c ---- linux-2.6.19.old/net/ipv4/udp.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/udp.c 2006-12-14 03:13:41.000000000 +0100 -@@ -108,11 +108,14 @@ - #include - #include - #include -+#include - - /* - * Snmp MIB for the UDP layer - */ - -+static xfrm4_rcv_encap_t xfrm4_rcv_encap_func; -+ - DEFINE_SNMP_STAT(struct udp_mib, udp_statistics) __read_mostly; - - struct hlist_head udp_hash[UDP_HTABLE_SIZE]; -@@ -917,6 +920,42 @@ - sk_common_release(sk); - } - -+#if defined(CONFIG_XFRM) || defined(CONFIG_IPSEC_NAT_TRAVERSAL) -+ -+/* if XFRM isn't a module, then register it directly. */ -+#if 0 && !defined(CONFIG_XFRM_MODULE) && !defined(CONFIG_IPSEC_NAT_TRAVERSAL) -+static xfrm4_rcv_encap_t xfrm4_rcv_encap_func = xfrm4_rcv_encap; -+#else -+static xfrm4_rcv_encap_t xfrm4_rcv_encap_func = NULL; -+#endif -+ -+int udp4_register_esp_rcvencap(xfrm4_rcv_encap_t func -+ , xfrm4_rcv_encap_t *oldfunc) -+{ -+ if(oldfunc != NULL) { -+ *oldfunc = xfrm4_rcv_encap_func; -+ } -+ -+#if 0 -+ if(xfrm4_rcv_encap_func != NULL) -+ return -1; -+#endif -+ -+ xfrm4_rcv_encap_func = func; -+ return 0; -+} -+ -+int udp4_unregister_esp_rcvencap(xfrm4_rcv_encap_t func) -+{ -+ if(xfrm4_rcv_encap_func != func) -+ return -1; -+ -+ xfrm4_rcv_encap_func = NULL; -+ return 0; -+} -+#endif /* CONFIG_XFRM_MODULE || CONFIG_IPSEC_NAT_TRAVERSAL */ -+ -+ - /* return: - * 1 if the the UDP system should process it - * 0 if we should drop this packet -@@ -924,9 +963,9 @@ - */ - static int udp_encap_rcv(struct sock * sk, struct sk_buff *skb) - { --#ifndef CONFIG_XFRM -+#if !defined(CONFIG_XFRM) && !defined(CONFIG_IPSEC_NAT_TRAVERSAL) - return 1; --#else -+#else /* either CONFIG_XFRM or CONFIG_IPSEC_NAT_TRAVERSAL */ - struct udp_sock *up = udp_sk(sk); - struct udphdr *uh; - struct iphdr *iph; -@@ -939,11 +978,11 @@ - /* if we're overly short, let UDP handle it */ - len = skb->len - sizeof(struct udphdr); - if (len <= 0) -- return 1; -+ return 2; - - /* if this is not encapsulated socket, then just return now */ - if (!encap_type) -- return 1; -+ return 3; - - /* If this is a paged skb, make sure we pull up - * whatever data we need to look at. */ -@@ -966,7 +1005,7 @@ - len = sizeof(struct udphdr); - } else - /* Must be an IKE packet.. pass it through */ -- return 1; -+ return 4; - break; - case UDP_ENCAP_ESPINUDP_NON_IKE: - /* Check if this is a keepalive packet. If so, eat it. */ -@@ -979,7 +1018,7 @@ - len = sizeof(struct udphdr) + 2 * sizeof(u32); - } else - /* Must be an IKE packet.. pass it through */ -- return 1; -+ return 5; - break; - } - -@@ -990,6 +1029,8 @@ - */ - if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) - return 0; -+ if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) -+ return 0; - - /* Now we can update and verify the packet length... */ - iph = skb->nh.iph; -@@ -1055,9 +1096,13 @@ - return 0; - } - if (ret < 0) { -- /* process the ESP packet */ -- ret = xfrm4_rcv_encap(skb, up->encap_type); -- UDP_INC_STATS_BH(UDP_MIB_INDATAGRAMS); -+ if(xfrm4_rcv_encap_func != NULL) { -+ ret = (*xfrm4_rcv_encap_func)(skb, up->encap_type); -+ UDP_INC_STATS_BH(UDP_MIB_INDATAGRAMS); -+ } else { -+ UDP_INC_STATS_BH(UDP_MIB_INERRORS); -+ ret = 1; -+ } - return -ret; - } - /* FALLTHROUGH -- it's a UDP Packet */ -@@ -1639,3 +1684,9 @@ - EXPORT_SYMBOL(udp_proc_register); - EXPORT_SYMBOL(udp_proc_unregister); - #endif -+ -+#if defined(CONFIG_IPSEC_NAT_TRAVERSAL) -+EXPORT_SYMBOL(udp4_register_esp_rcvencap); -+EXPORT_SYMBOL(udp4_unregister_esp_rcvencap); -+#endif -+ diff --git a/target/linux/etrax/patches/generic_2.6/130-netfilter-ipset.patch b/target/linux/etrax/patches/generic_2.6/130-netfilter-ipset.patch deleted file mode 100644 index 8a35d8a6b4..0000000000 --- a/target/linux/etrax/patches/generic_2.6/130-netfilter-ipset.patch +++ /dev/null @@ -1,5851 +0,0 @@ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,489 @@ -+#ifndef _IP_SET_H -+#define _IP_SET_H -+ -+/* Copyright (C) 2000-2002 Joakim Axelsson -+ * Patrick Schaaf -+ * Martin Josefsson -+ * Copyright (C) 2003-2004 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* -+ * A sockopt of such quality has hardly ever been seen before on the open -+ * market! This little beauty, hardly ever used: above 64, so it's -+ * traditionally used for firewalling, not touched (even once!) by the -+ * 2.0, 2.2 and 2.4 kernels! -+ * -+ * Comes with its own certificate of authenticity, valid anywhere in the -+ * Free world! -+ * -+ * Rusty, 19.4.2000 -+ */ -+#define SO_IP_SET 83 -+ -+/* -+ * Heavily modify by Joakim Axelsson 08.03.2002 -+ * - Made it more modulebased -+ * -+ * Additional heavy modifications by Jozsef Kadlecsik 22.02.2004 -+ * - bindings added -+ * - in order to "deal with" backward compatibility, renamed to ipset -+ */ -+ -+/* -+ * Used so that the kernel module and ipset-binary can match their versions -+ */ -+#define IP_SET_PROTOCOL_VERSION 2 -+ -+#define IP_SET_MAXNAMELEN 32 /* set names and set typenames */ -+ -+/* Lets work with our own typedef for representing an IP address. -+ * We hope to make the code more portable, possibly to IPv6... -+ * -+ * The representation works in HOST byte order, because most set types -+ * will perform arithmetic operations and compare operations. -+ * -+ * For now the type is an uint32_t. -+ * -+ * Make sure to ONLY use the functions when translating and parsing -+ * in order to keep the host byte order and make it more portable: -+ * parse_ip() -+ * parse_mask() -+ * parse_ipandmask() -+ * ip_tostring() -+ * (Joakim: where are they???) -+ */ -+ -+typedef uint32_t ip_set_ip_t; -+ -+/* Sets are identified by an id in kernel space. Tweak with ip_set_id_t -+ * and IP_SET_INVALID_ID if you want to increase the max number of sets. -+ */ -+typedef uint16_t ip_set_id_t; -+ -+#define IP_SET_INVALID_ID 65535 -+ -+/* How deep we follow bindings */ -+#define IP_SET_MAX_BINDINGS 6 -+ -+/* -+ * Option flags for kernel operations (ipt_set_info) -+ */ -+#define IPSET_SRC 0x01 /* Source match/add */ -+#define IPSET_DST 0x02 /* Destination match/add */ -+#define IPSET_MATCH_INV 0x04 /* Inverse matching */ -+ -+/* -+ * Set types (flavours) -+ */ -+#define IPSET_TYPE_IP 0 /* IP address type of set */ -+#define IPSET_TYPE_PORT 1 /* Port type of set */ -+ -+/* Reserved keywords */ -+#define IPSET_TOKEN_DEFAULT ":default:" -+#define IPSET_TOKEN_ALL ":all:" -+ -+/* SO_IP_SET operation constants, and their request struct types. -+ * -+ * Operation ids: -+ * 0-99: commands with version checking -+ * 100-199: add/del/test/bind/unbind -+ * 200-299: list, save, restore -+ */ -+ -+/* Single shot operations: -+ * version, create, destroy, flush, rename and swap -+ * -+ * Sets are identified by name. -+ */ -+ -+#define IP_SET_REQ_STD \ -+ unsigned op; \ -+ unsigned version; \ -+ char name[IP_SET_MAXNAMELEN] -+ -+#define IP_SET_OP_CREATE 0x00000001 /* Create a new (empty) set */ -+struct ip_set_req_create { -+ IP_SET_REQ_STD; -+ char typename[IP_SET_MAXNAMELEN]; -+}; -+ -+#define IP_SET_OP_DESTROY 0x00000002 /* Remove a (empty) set */ -+struct ip_set_req_std { -+ IP_SET_REQ_STD; -+}; -+ -+#define IP_SET_OP_FLUSH 0x00000003 /* Remove all IPs in a set */ -+/* Uses ip_set_req_std */ -+ -+#define IP_SET_OP_RENAME 0x00000004 /* Rename a set */ -+/* Uses ip_set_req_create */ -+ -+#define IP_SET_OP_SWAP 0x00000005 /* Swap two sets */ -+/* Uses ip_set_req_create */ -+ -+union ip_set_name_index { -+ char name[IP_SET_MAXNAMELEN]; -+ ip_set_id_t index; -+}; -+ -+#define IP_SET_OP_GET_BYNAME 0x00000006 /* Get set index by name */ -+struct ip_set_req_get_set { -+ unsigned op; -+ unsigned version; -+ union ip_set_name_index set; -+}; -+ -+#define IP_SET_OP_GET_BYINDEX 0x00000007 /* Get set name by index */ -+/* Uses ip_set_req_get_set */ -+ -+#define IP_SET_OP_VERSION 0x00000100 /* Ask kernel version */ -+struct ip_set_req_version { -+ unsigned op; -+ unsigned version; -+}; -+ -+/* Double shots operations: -+ * add, del, test, bind and unbind. -+ * -+ * First we query the kernel to get the index and type of the target set, -+ * then issue the command. Validity of IP is checked in kernel in order -+ * to minimalize sockopt operations. -+ */ -+ -+/* Get minimal set data for add/del/test/bind/unbind IP */ -+#define IP_SET_OP_ADT_GET 0x00000010 /* Get set and type */ -+struct ip_set_req_adt_get { -+ unsigned op; -+ unsigned version; -+ union ip_set_name_index set; -+ char typename[IP_SET_MAXNAMELEN]; -+}; -+ -+#define IP_SET_REQ_BYINDEX \ -+ unsigned op; \ -+ ip_set_id_t index; -+ -+struct ip_set_req_adt { -+ IP_SET_REQ_BYINDEX; -+}; -+ -+#define IP_SET_OP_ADD_IP 0x00000101 /* Add an IP to a set */ -+/* Uses ip_set_req_adt, with type specific addage */ -+ -+#define IP_SET_OP_DEL_IP 0x00000102 /* Remove an IP from a set */ -+/* Uses ip_set_req_adt, with type specific addage */ -+ -+#define IP_SET_OP_TEST_IP 0x00000103 /* Test an IP in a set */ -+/* Uses ip_set_req_adt, with type specific addage */ -+ -+#define IP_SET_OP_BIND_SET 0x00000104 /* Bind an IP to a set */ -+/* Uses ip_set_req_bind, with type specific addage */ -+struct ip_set_req_bind { -+ IP_SET_REQ_BYINDEX; -+ char binding[IP_SET_MAXNAMELEN]; -+}; -+ -+#define IP_SET_OP_UNBIND_SET 0x00000105 /* Unbind an IP from a set */ -+/* Uses ip_set_req_bind, with type speficic addage -+ * index = 0 means unbinding for all sets */ -+ -+#define IP_SET_OP_TEST_BIND_SET 0x00000106 /* Test binding an IP to a set */ -+/* Uses ip_set_req_bind, with type specific addage */ -+ -+/* Multiple shots operations: list, save, restore. -+ * -+ * - check kernel version and query the max number of sets -+ * - get the basic information on all sets -+ * and size required for the next step -+ * - get actual set data: header, data, bindings -+ */ -+ -+/* Get max_sets and the index of a queried set -+ */ -+#define IP_SET_OP_MAX_SETS 0x00000020 -+struct ip_set_req_max_sets { -+ unsigned op; -+ unsigned version; -+ ip_set_id_t max_sets; /* max_sets */ -+ ip_set_id_t sets; /* real number of sets */ -+ union ip_set_name_index set; /* index of set if name used */ -+}; -+ -+/* Get the id and name of the sets plus size for next step */ -+#define IP_SET_OP_LIST_SIZE 0x00000201 -+#define IP_SET_OP_SAVE_SIZE 0x00000202 -+struct ip_set_req_setnames { -+ unsigned op; -+ ip_set_id_t index; /* set to list/save */ -+ size_t size; /* size to get setdata/bindings */ -+ /* followed by sets number of struct ip_set_name_list */ -+}; -+ -+struct ip_set_name_list { -+ char name[IP_SET_MAXNAMELEN]; -+ char typename[IP_SET_MAXNAMELEN]; -+ ip_set_id_t index; -+ ip_set_id_t id; -+}; -+ -+/* The actual list operation */ -+#define IP_SET_OP_LIST 0x00000203 -+struct ip_set_req_list { -+ IP_SET_REQ_BYINDEX; -+ /* sets number of struct ip_set_list in reply */ -+}; -+ -+struct ip_set_list { -+ ip_set_id_t index; -+ ip_set_id_t binding; -+ u_int32_t ref; -+ size_t header_size; /* Set header data of header_size */ -+ size_t members_size; /* Set members data of members_size */ -+ size_t bindings_size; /* Set bindings data of bindings_size */ -+}; -+ -+struct ip_set_hash_list { -+ ip_set_ip_t ip; -+ ip_set_id_t binding; -+}; -+ -+/* The save operation */ -+#define IP_SET_OP_SAVE 0x00000204 -+/* Uses ip_set_req_list, in the reply replaced by -+ * sets number of struct ip_set_save plus a marker -+ * ip_set_save followed by ip_set_hash_save structures. -+ */ -+struct ip_set_save { -+ ip_set_id_t index; -+ ip_set_id_t binding; -+ size_t header_size; /* Set header data of header_size */ -+ size_t members_size; /* Set members data of members_size */ -+}; -+ -+/* At restoring, ip == 0 means default binding for the given set: */ -+struct ip_set_hash_save { -+ ip_set_ip_t ip; -+ ip_set_id_t id; -+ ip_set_id_t binding; -+}; -+ -+/* The restore operation */ -+#define IP_SET_OP_RESTORE 0x00000205 -+/* Uses ip_set_req_setnames followed by ip_set_restore structures -+ * plus a marker ip_set_restore, followed by ip_set_hash_save -+ * structures. -+ */ -+struct ip_set_restore { -+ char name[IP_SET_MAXNAMELEN]; -+ char typename[IP_SET_MAXNAMELEN]; -+ ip_set_id_t index; -+ size_t header_size; /* Create data of header_size */ -+ size_t members_size; /* Set members data of members_size */ -+}; -+ -+static inline int bitmap_bytes(ip_set_ip_t a, ip_set_ip_t b) -+{ -+ return 4 * ((((b - a + 8) / 8) + 3) / 4); -+} -+ -+#ifdef __KERNEL__ -+ -+#define ip_set_printk(format, args...) \ -+ do { \ -+ printk("%s: %s: ", __FILE__, __FUNCTION__); \ -+ printk(format "\n" , ## args); \ -+ } while (0) -+ -+#if defined(IP_SET_DEBUG) -+#define DP(format, args...) \ -+ do { \ -+ printk("%s: %s (DBG): ", __FILE__, __FUNCTION__);\ -+ printk(format "\n" , ## args); \ -+ } while (0) -+#define IP_SET_ASSERT(x) \ -+ do { \ -+ if (!(x)) \ -+ printk("IP_SET_ASSERT: %s:%i(%s)\n", \ -+ __FILE__, __LINE__, __FUNCTION__); \ -+ } while (0) -+#else -+#define DP(format, args...) -+#define IP_SET_ASSERT(x) -+#endif -+ -+struct ip_set; -+ -+/* -+ * The ip_set_type definition - one per set type, e.g. "ipmap". -+ * -+ * Each individual set has a pointer, set->type, going to one -+ * of these structures. Function pointers inside the structure implement -+ * the real behaviour of the sets. -+ * -+ * If not mentioned differently, the implementation behind the function -+ * pointers of a set_type, is expected to return 0 if ok, and a negative -+ * errno (e.g. -EINVAL) on error. -+ */ -+struct ip_set_type { -+ struct list_head list; /* next in list of set types */ -+ -+ /* test for IP in set (kernel: iptables -m set src|dst) -+ * return 0 if not in set, 1 if in set. -+ */ -+ int (*testip_kernel) (struct ip_set *set, -+ const struct sk_buff * skb, -+ u_int32_t flags, -+ ip_set_ip_t *ip); -+ -+ /* test for IP in set (userspace: ipset -T set IP) -+ * return 0 if not in set, 1 if in set. -+ */ -+ int (*testip) (struct ip_set *set, -+ const void *data, size_t size, -+ ip_set_ip_t *ip); -+ -+ /* -+ * Size of the data structure passed by when -+ * adding/deletin/testing an entry. -+ */ -+ size_t reqsize; -+ -+ /* Add IP into set (userspace: ipset -A set IP) -+ * Return -EEXIST if the address is already in the set, -+ * and -ERANGE if the address lies outside the set bounds. -+ * If the address was not already in the set, 0 is returned. -+ */ -+ int (*addip) (struct ip_set *set, -+ const void *data, size_t size, -+ ip_set_ip_t *ip); -+ -+ /* Add IP into set (kernel: iptables ... -j SET set src|dst) -+ * Return -EEXIST if the address is already in the set, -+ * and -ERANGE if the address lies outside the set bounds. -+ * If the address was not already in the set, 0 is returned. -+ */ -+ int (*addip_kernel) (struct ip_set *set, -+ const struct sk_buff * skb, -+ u_int32_t flags, -+ ip_set_ip_t *ip); -+ -+ /* remove IP from set (userspace: ipset -D set --entry x) -+ * Return -EEXIST if the address is NOT in the set, -+ * and -ERANGE if the address lies outside the set bounds. -+ * If the address really was in the set, 0 is returned. -+ */ -+ int (*delip) (struct ip_set *set, -+ const void *data, size_t size, -+ ip_set_ip_t *ip); -+ -+ /* remove IP from set (kernel: iptables ... -j SET --entry x) -+ * Return -EEXIST if the address is NOT in the set, -+ * and -ERANGE if the address lies outside the set bounds. -+ * If the address really was in the set, 0 is returned. -+ */ -+ int (*delip_kernel) (struct ip_set *set, -+ const struct sk_buff * skb, -+ u_int32_t flags, -+ ip_set_ip_t *ip); -+ -+ /* new set creation - allocated type specific items -+ */ -+ int (*create) (struct ip_set *set, -+ const void *data, size_t size); -+ -+ /* retry the operation after successfully tweaking the set -+ */ -+ int (*retry) (struct ip_set *set); -+ -+ /* set destruction - free type specific items -+ * There is no return value. -+ * Can be called only when child sets are destroyed. -+ */ -+ void (*destroy) (struct ip_set *set); -+ -+ /* set flushing - reset all bits in the set, or something similar. -+ * There is no return value. -+ */ -+ void (*flush) (struct ip_set *set); -+ -+ /* Listing: size needed for header -+ */ -+ size_t header_size; -+ -+ /* Listing: Get the header -+ * -+ * Fill in the information in "data". -+ * This function is always run after list_header_size() under a -+ * writelock on the set. Therefor is the length of "data" always -+ * correct. -+ */ -+ void (*list_header) (const struct ip_set *set, -+ void *data); -+ -+ /* Listing: Get the size for the set members -+ */ -+ int (*list_members_size) (const struct ip_set *set); -+ -+ /* Listing: Get the set members -+ * -+ * Fill in the information in "data". -+ * This function is always run after list_member_size() under a -+ * writelock on the set. Therefor is the length of "data" always -+ * correct. -+ */ -+ void (*list_members) (const struct ip_set *set, -+ void *data); -+ -+ char typename[IP_SET_MAXNAMELEN]; -+ char typecode; -+ int protocol_version; -+ -+ /* Set this to THIS_MODULE if you are a module, otherwise NULL */ -+ struct module *me; -+}; -+ -+extern int ip_set_register_set_type(struct ip_set_type *set_type); -+extern void ip_set_unregister_set_type(struct ip_set_type *set_type); -+ -+/* A generic ipset */ -+struct ip_set { -+ char name[IP_SET_MAXNAMELEN]; /* the name of the set */ -+ rwlock_t lock; /* lock for concurrency control */ -+ ip_set_id_t id; /* set id for swapping */ -+ ip_set_id_t binding; /* default binding for the set */ -+ atomic_t ref; /* in kernel and in hash references */ -+ struct ip_set_type *type; /* the set types */ -+ void *data; /* pooltype specific data */ -+}; -+ -+/* Structure to bind set elements to sets */ -+struct ip_set_hash { -+ struct list_head list; /* list of clashing entries in hash */ -+ ip_set_ip_t ip; /* ip from set */ -+ ip_set_id_t id; /* set id */ -+ ip_set_id_t binding; /* set we bind the element to */ -+}; -+ -+/* register and unregister set references */ -+extern ip_set_id_t ip_set_get_byname(const char name[IP_SET_MAXNAMELEN]); -+extern ip_set_id_t ip_set_get_byindex(ip_set_id_t id); -+extern void ip_set_put(ip_set_id_t id); -+ -+/* API for iptables set match, and SET target */ -+extern void ip_set_addip_kernel(ip_set_id_t id, -+ const struct sk_buff *skb, -+ const u_int32_t *flags); -+extern void ip_set_delip_kernel(ip_set_id_t id, -+ const struct sk_buff *skb, -+ const u_int32_t *flags); -+extern int ip_set_testip_kernel(ip_set_id_t id, -+ const struct sk_buff *skb, -+ const u_int32_t *flags); -+ -+#endif /* __KERNEL__ */ -+ -+#endif /*_IP_SET_H*/ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_iphash.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_iphash.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_iphash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_iphash.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,30 @@ -+#ifndef __IP_SET_IPHASH_H -+#define __IP_SET_IPHASH_H -+ -+#include -+ -+#define SETTYPE_NAME "iphash" -+#define MAX_RANGE 0x0000FFFF -+ -+struct ip_set_iphash { -+ ip_set_ip_t *members; /* the iphash proper */ -+ uint32_t initval; /* initval for jhash_1word */ -+ uint32_t prime; /* prime for double hashing */ -+ uint32_t hashsize; /* hash size */ -+ uint16_t probes; /* max number of probes */ -+ uint16_t resize; /* resize factor in percent */ -+ ip_set_ip_t netmask; /* netmask */ -+}; -+ -+struct ip_set_req_iphash_create { -+ uint32_t hashsize; -+ uint16_t probes; -+ uint16_t resize; -+ ip_set_ip_t netmask; -+}; -+ -+struct ip_set_req_iphash { -+ ip_set_ip_t ip; -+}; -+ -+#endif /* __IP_SET_IPHASH_H */ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_ipmap.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_ipmap.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_ipmap.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_ipmap.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,56 @@ -+#ifndef __IP_SET_IPMAP_H -+#define __IP_SET_IPMAP_H -+ -+#include -+ -+#define SETTYPE_NAME "ipmap" -+#define MAX_RANGE 0x0000FFFF -+ -+struct ip_set_ipmap { -+ void *members; /* the ipmap proper */ -+ ip_set_ip_t first_ip; /* host byte order, included in range */ -+ ip_set_ip_t last_ip; /* host byte order, included in range */ -+ ip_set_ip_t netmask; /* subnet netmask */ -+ ip_set_ip_t sizeid; /* size of set in IPs */ -+ u_int16_t hosts; /* number of hosts in a subnet */ -+}; -+ -+struct ip_set_req_ipmap_create { -+ ip_set_ip_t from; -+ ip_set_ip_t to; -+ ip_set_ip_t netmask; -+}; -+ -+struct ip_set_req_ipmap { -+ ip_set_ip_t ip; -+}; -+ -+unsigned int -+mask_to_bits(ip_set_ip_t mask) -+{ -+ unsigned int bits = 32; -+ ip_set_ip_t maskaddr; -+ -+ if (mask == 0xFFFFFFFF) -+ return bits; -+ -+ maskaddr = 0xFFFFFFFE; -+ while (--bits >= 0 && maskaddr != mask) -+ maskaddr <<= 1; -+ -+ return bits; -+} -+ -+ip_set_ip_t -+range_to_mask(ip_set_ip_t from, ip_set_ip_t to, unsigned int *bits) -+{ -+ ip_set_ip_t mask = 0xFFFFFFFE; -+ -+ *bits = 32; -+ while (--(*bits) >= 0 && mask && (to & mask) != from) -+ mask <<= 1; -+ -+ return mask; -+} -+ -+#endif /* __IP_SET_IPMAP_H */ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_iptree.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_iptree.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_iptree.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_iptree.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,39 @@ -+#ifndef __IP_SET_IPTREE_H -+#define __IP_SET_IPTREE_H -+ -+#include -+ -+#define SETTYPE_NAME "iptree" -+#define MAX_RANGE 0x0000FFFF -+ -+struct ip_set_iptreed { -+ unsigned long expires[255]; /* x.x.x.ADDR */ -+}; -+ -+struct ip_set_iptreec { -+ struct ip_set_iptreed *tree[255]; /* x.x.ADDR.* */ -+}; -+ -+struct ip_set_iptreeb { -+ struct ip_set_iptreec *tree[255]; /* x.ADDR.*.* */ -+}; -+ -+struct ip_set_iptree { -+ unsigned int timeout; -+ unsigned int gc_interval; -+#ifdef __KERNEL__ -+ struct timer_list gc; -+ struct ip_set_iptreeb *tree[255]; /* ADDR.*.*.* */ -+#endif -+}; -+ -+struct ip_set_req_iptree_create { -+ unsigned int timeout; -+}; -+ -+struct ip_set_req_iptree { -+ ip_set_ip_t ip; -+ unsigned int timeout; -+}; -+ -+#endif /* __IP_SET_IPTREE_H */ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_jhash.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_jhash.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_jhash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_jhash.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,148 @@ -+#ifndef _LINUX_IPSET_JHASH_H -+#define _LINUX_IPSET_JHASH_H -+ -+/* This is a copy of linux/jhash.h but the types u32/u8 are changed -+ * to __u32/__u8 so that the header file can be included into -+ * userspace code as well. Jozsef Kadlecsik (kadlec@blackhole.kfki.hu) -+ */ -+ -+/* jhash.h: Jenkins hash support. -+ * -+ * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net) -+ * -+ * http://burtleburtle.net/bob/hash/ -+ * -+ * These are the credits from Bob's sources: -+ * -+ * lookup2.c, by Bob Jenkins, December 1996, Public Domain. -+ * hash(), hash2(), hash3, and mix() are externally useful functions. -+ * Routines to test the hash are included if SELF_TEST is defined. -+ * You can use this free for any purpose. It has no warranty. -+ * -+ * Copyright (C) 2003 David S. Miller (davem@redhat.com) -+ * -+ * I've modified Bob's hash to be useful in the Linux kernel, and -+ * any bugs present are surely my fault. -DaveM -+ */ -+ -+/* NOTE: Arguments are modified. */ -+#define __jhash_mix(a, b, c) \ -+{ \ -+ a -= b; a -= c; a ^= (c>>13); \ -+ b -= c; b -= a; b ^= (a<<8); \ -+ c -= a; c -= b; c ^= (b>>13); \ -+ a -= b; a -= c; a ^= (c>>12); \ -+ b -= c; b -= a; b ^= (a<<16); \ -+ c -= a; c -= b; c ^= (b>>5); \ -+ a -= b; a -= c; a ^= (c>>3); \ -+ b -= c; b -= a; b ^= (a<<10); \ -+ c -= a; c -= b; c ^= (b>>15); \ -+} -+ -+/* The golden ration: an arbitrary value */ -+#define JHASH_GOLDEN_RATIO 0x9e3779b9 -+ -+/* The most generic version, hashes an arbitrary sequence -+ * of bytes. No alignment or length assumptions are made about -+ * the input key. -+ */ -+static inline __u32 jhash(void *key, __u32 length, __u32 initval) -+{ -+ __u32 a, b, c, len; -+ __u8 *k = key; -+ -+ len = length; -+ a = b = JHASH_GOLDEN_RATIO; -+ c = initval; -+ -+ while (len >= 12) { -+ a += (k[0] +((__u32)k[1]<<8) +((__u32)k[2]<<16) +((__u32)k[3]<<24)); -+ b += (k[4] +((__u32)k[5]<<8) +((__u32)k[6]<<16) +((__u32)k[7]<<24)); -+ c += (k[8] +((__u32)k[9]<<8) +((__u32)k[10]<<16)+((__u32)k[11]<<24)); -+ -+ __jhash_mix(a,b,c); -+ -+ k += 12; -+ len -= 12; -+ } -+ -+ c += length; -+ switch (len) { -+ case 11: c += ((__u32)k[10]<<24); -+ case 10: c += ((__u32)k[9]<<16); -+ case 9 : c += ((__u32)k[8]<<8); -+ case 8 : b += ((__u32)k[7]<<24); -+ case 7 : b += ((__u32)k[6]<<16); -+ case 6 : b += ((__u32)k[5]<<8); -+ case 5 : b += k[4]; -+ case 4 : a += ((__u32)k[3]<<24); -+ case 3 : a += ((__u32)k[2]<<16); -+ case 2 : a += ((__u32)k[1]<<8); -+ case 1 : a += k[0]; -+ }; -+ -+ __jhash_mix(a,b,c); -+ -+ return c; -+} -+ -+/* A special optimized version that handles 1 or more of __u32s. -+ * The length parameter here is the number of __u32s in the key. -+ */ -+static inline __u32 jhash2(__u32 *k, __u32 length, __u32 initval) -+{ -+ __u32 a, b, c, len; -+ -+ a = b = JHASH_GOLDEN_RATIO; -+ c = initval; -+ len = length; -+ -+ while (len >= 3) { -+ a += k[0]; -+ b += k[1]; -+ c += k[2]; -+ __jhash_mix(a, b, c); -+ k += 3; len -= 3; -+ } -+ -+ c += length * 4; -+ -+ switch (len) { -+ case 2 : b += k[1]; -+ case 1 : a += k[0]; -+ }; -+ -+ __jhash_mix(a,b,c); -+ -+ return c; -+} -+ -+ -+/* A special ultra-optimized versions that knows they are hashing exactly -+ * 3, 2 or 1 word(s). -+ * -+ * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally -+ * done at the end is not done here. -+ */ -+static inline __u32 jhash_3words(__u32 a, __u32 b, __u32 c, __u32 initval) -+{ -+ a += JHASH_GOLDEN_RATIO; -+ b += JHASH_GOLDEN_RATIO; -+ c += initval; -+ -+ __jhash_mix(a, b, c); -+ -+ return c; -+} -+ -+static inline __u32 jhash_2words(__u32 a, __u32 b, __u32 initval) -+{ -+ return jhash_3words(a, b, 0, initval); -+} -+ -+static inline __u32 jhash_1word(__u32 a, __u32 initval) -+{ -+ return jhash_3words(a, 0, 0, initval); -+} -+ -+#endif /* _LINUX_IPSET_JHASH_H */ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_macipmap.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_macipmap.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_macipmap.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_macipmap.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,38 @@ -+#ifndef __IP_SET_MACIPMAP_H -+#define __IP_SET_MACIPMAP_H -+ -+#include -+ -+#define SETTYPE_NAME "macipmap" -+#define MAX_RANGE 0x0000FFFF -+ -+/* general flags */ -+#define IPSET_MACIP_MATCHUNSET 1 -+ -+/* per ip flags */ -+#define IPSET_MACIP_ISSET 1 -+ -+struct ip_set_macipmap { -+ void *members; /* the macipmap proper */ -+ ip_set_ip_t first_ip; /* host byte order, included in range */ -+ ip_set_ip_t last_ip; /* host byte order, included in range */ -+ u_int32_t flags; -+}; -+ -+struct ip_set_req_macipmap_create { -+ ip_set_ip_t from; -+ ip_set_ip_t to; -+ u_int32_t flags; -+}; -+ -+struct ip_set_req_macipmap { -+ ip_set_ip_t ip; -+ unsigned char ethernet[ETH_ALEN]; -+}; -+ -+struct ip_set_macip { -+ unsigned short flags; -+ unsigned char ethernet[ETH_ALEN]; -+}; -+ -+#endif /* __IP_SET_MACIPMAP_H */ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_malloc.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_malloc.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_malloc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_malloc.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,42 @@ -+#ifndef _IP_SET_MALLOC_H -+#define _IP_SET_MALLOC_H -+ -+#ifdef __KERNEL__ -+ -+/* Memory allocation and deallocation */ -+static size_t max_malloc_size = 0; -+ -+static inline void init_max_malloc_size(void) -+{ -+#define CACHE(x) max_malloc_size = x; -+#include -+#undef CACHE -+} -+ -+static inline void * ip_set_malloc_atomic(size_t bytes) -+{ -+ if (bytes > max_malloc_size) -+ return __vmalloc(bytes, GFP_ATOMIC, PAGE_KERNEL); -+ else -+ return kmalloc(bytes, GFP_ATOMIC); -+} -+ -+static inline void * ip_set_malloc(size_t bytes) -+{ -+ if (bytes > max_malloc_size) -+ return vmalloc(bytes); -+ else -+ return kmalloc(bytes, GFP_KERNEL); -+} -+ -+static inline void ip_set_free(void * data, size_t bytes) -+{ -+ if (bytes > max_malloc_size) -+ vfree(data); -+ else -+ kfree(data); -+} -+ -+#endif /* __KERNEL__ */ -+ -+#endif /*_IP_SET_MALLOC_H*/ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_nethash.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_nethash.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_nethash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_nethash.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,55 @@ -+#ifndef __IP_SET_NETHASH_H -+#define __IP_SET_NETHASH_H -+ -+#include -+ -+#define SETTYPE_NAME "nethash" -+#define MAX_RANGE 0x0000FFFF -+ -+struct ip_set_nethash { -+ ip_set_ip_t *members; /* the nethash proper */ -+ uint32_t initval; /* initval for jhash_1word */ -+ uint32_t prime; /* prime for double hashing */ -+ uint32_t hashsize; /* hash size */ -+ uint16_t probes; /* max number of probes */ -+ uint16_t resize; /* resize factor in percent */ -+ unsigned char cidr[30]; /* CIDR sizes */ -+}; -+ -+struct ip_set_req_nethash_create { -+ uint32_t hashsize; -+ uint16_t probes; -+ uint16_t resize; -+}; -+ -+struct ip_set_req_nethash { -+ ip_set_ip_t ip; -+ unsigned char cidr; -+}; -+ -+static unsigned char shifts[] = {255, 253, 249, 241, 225, 193, 129, 1}; -+ -+static inline ip_set_ip_t -+pack(ip_set_ip_t ip, unsigned char cidr) -+{ -+ ip_set_ip_t addr, *paddr = &addr; -+ unsigned char n, t, *a; -+ -+ addr = htonl(ip & (0xFFFFFFFF << (32 - (cidr)))); -+#ifdef __KERNEL__ -+ DP("ip:%u.%u.%u.%u/%u", NIPQUAD(addr), cidr); -+#endif -+ n = cidr / 8; -+ t = cidr % 8; -+ a = &((unsigned char *)paddr)[n]; -+ *a = *a /(1 << (8 - t)) + shifts[t]; -+#ifdef __KERNEL__ -+ DP("n: %u, t: %u, a: %u", n, t, *a); -+ DP("ip:%u.%u.%u.%u/%u, %u.%u.%u.%u", -+ HIPQUAD(ip), cidr, NIPQUAD(addr)); -+#endif -+ -+ return ntohl(addr); -+} -+ -+#endif /* __IP_SET_NETHASH_H */ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_portmap.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_portmap.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_portmap.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_portmap.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,25 @@ -+#ifndef __IP_SET_PORTMAP_H -+#define __IP_SET_PORTMAP_H -+ -+#include -+ -+#define SETTYPE_NAME "portmap" -+#define MAX_RANGE 0x0000FFFF -+#define INVALID_PORT (MAX_RANGE + 1) -+ -+struct ip_set_portmap { -+ void *members; /* the portmap proper */ -+ ip_set_ip_t first_port; /* host byte order, included in range */ -+ ip_set_ip_t last_port; /* host byte order, included in range */ -+}; -+ -+struct ip_set_req_portmap_create { -+ ip_set_ip_t from; -+ ip_set_ip_t to; -+}; -+ -+struct ip_set_req_portmap { -+ ip_set_ip_t port; -+}; -+ -+#endif /* __IP_SET_PORTMAP_H */ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_prime.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_prime.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_set_prime.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_set_prime.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,34 @@ -+#ifndef __IP_SET_PRIME_H -+#define __IP_SET_PRIME_H -+ -+static inline unsigned make_prime_bound(unsigned nr) -+{ -+ unsigned long long nr64 = nr; -+ unsigned long long x = 1; -+ nr = 1; -+ while (x <= nr64) { x <<= 2; nr <<= 1; } -+ return nr; -+} -+ -+static inline int make_prime_check(unsigned nr) -+{ -+ unsigned x = 3; -+ unsigned b = make_prime_bound(nr); -+ while (x <= b) { -+ if (0 == (nr % x)) return 0; -+ x += 2; -+ } -+ return 1; -+} -+ -+static unsigned make_prime(unsigned nr) -+{ -+ if (0 == (nr & 1)) nr--; -+ while (nr > 1) { -+ if (make_prime_check(nr)) return nr; -+ nr -= 2; -+ } -+ return 2; -+} -+ -+#endif /* __IP_SET_PRIME_H */ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ipt_set.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ipt_set.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ipt_set.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ipt_set.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,21 @@ -+#ifndef _IPT_SET_H -+#define _IPT_SET_H -+ -+#include -+ -+struct ipt_set_info { -+ ip_set_id_t index; -+ u_int32_t flags[IP_SET_MAX_BINDINGS + 1]; -+}; -+ -+/* match info */ -+struct ipt_set_info_match { -+ struct ipt_set_info match_set; -+}; -+ -+struct ipt_set_info_target { -+ struct ipt_set_info add_set; -+ struct ipt_set_info del_set; -+}; -+ -+#endif /*_IPT_SET_H*/ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/listhelp.h linux-2.6.19.dev/include/linux/netfilter_ipv4/listhelp.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/listhelp.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/listhelp.h 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,123 @@ -+#ifndef _LISTHELP_H -+#define _LISTHELP_H -+#include -+ -+/* Header to do more comprehensive job than linux/list.h; assume list -+ is first entry in structure. */ -+ -+/* Return pointer to first true entry, if any, or NULL. A macro -+ required to allow inlining of cmpfn. */ -+#define LIST_FIND(head, cmpfn, type, args...) \ -+({ \ -+ const struct list_head *__i, *__j = NULL; \ -+ \ -+ ASSERT_READ_LOCK(head); \ -+ list_for_each(__i, (head)) \ -+ if (cmpfn((const type)__i , ## args)) { \ -+ __j = __i; \ -+ break; \ -+ } \ -+ (type)__j; \ -+}) -+ -+#define LIST_FIND_W(head, cmpfn, type, args...) \ -+({ \ -+ const struct list_head *__i, *__j = NULL; \ -+ \ -+ ASSERT_WRITE_LOCK(head); \ -+ list_for_each(__i, (head)) \ -+ if (cmpfn((type)__i , ## args)) { \ -+ __j = __i; \ -+ break; \ -+ } \ -+ (type)__j; \ -+}) -+ -+/* Just like LIST_FIND but we search backwards */ -+#define LIST_FIND_B(head, cmpfn, type, args...) \ -+({ \ -+ const struct list_head *__i, *__j = NULL; \ -+ \ -+ ASSERT_READ_LOCK(head); \ -+ list_for_each_prev(__i, (head)) \ -+ if (cmpfn((const type)__i , ## args)) { \ -+ __j = __i; \ -+ break; \ -+ } \ -+ (type)__j; \ -+}) -+ -+static inline int -+__list_cmp_same(const void *p1, const void *p2) { return p1 == p2; } -+ -+/* Is this entry in the list? */ -+static inline int -+list_inlist(struct list_head *head, const void *entry) -+{ -+ return LIST_FIND(head, __list_cmp_same, void *, entry) != NULL; -+} -+ -+/* Delete from list. */ -+#ifdef CONFIG_NETFILTER_DEBUG -+#define LIST_DELETE(head, oldentry) \ -+do { \ -+ ASSERT_WRITE_LOCK(head); \ -+ if (!list_inlist(head, oldentry)) \ -+ printk("LIST_DELETE: %s:%u `%s'(%p) not in %s.\n", \ -+ __FILE__, __LINE__, #oldentry, oldentry, #head); \ -+ else list_del((struct list_head *)oldentry); \ -+} while(0) -+#else -+#define LIST_DELETE(head, oldentry) list_del((struct list_head *)oldentry) -+#endif -+ -+/* Append. */ -+static inline void -+list_append(struct list_head *head, void *new) -+{ -+ ASSERT_WRITE_LOCK(head); -+ list_add((new), (head)->prev); -+} -+ -+/* Prepend. */ -+static inline void -+list_prepend(struct list_head *head, void *new) -+{ -+ ASSERT_WRITE_LOCK(head); -+ list_add(new, head); -+} -+ -+/* Insert according to ordering function; insert before first true. */ -+#define LIST_INSERT(head, new, cmpfn) \ -+do { \ -+ struct list_head *__i; \ -+ ASSERT_WRITE_LOCK(head); \ -+ list_for_each(__i, (head)) \ -+ if ((new), (typeof (new))__i) \ -+ break; \ -+ list_add((struct list_head *)(new), __i->prev); \ -+} while(0) -+ -+/* If the field after the list_head is a nul-terminated string, you -+ can use these functions. */ -+static inline int __list_cmp_name(const void *i, const char *name) -+{ -+ return strcmp(name, i+sizeof(struct list_head)) == 0; -+} -+ -+/* Returns false if same name already in list, otherwise does insert. */ -+static inline int -+list_named_insert(struct list_head *head, void *new) -+{ -+ if (LIST_FIND(head, __list_cmp_name, void *, -+ new + sizeof(struct list_head))) -+ return 0; -+ list_prepend(head, new); -+ return 1; -+} -+ -+/* Find this named element in the list. */ -+#define list_named_find(head, name) \ -+LIST_FIND(head, __list_cmp_name, void *, name) -+ -+#endif /*_LISTHELP_H*/ -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ip_set.c linux-2.6.19.dev/net/ipv4/netfilter/ip_set.c ---- linux-2.6.19.old/net/ipv4/netfilter/ip_set.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ip_set.c 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,1989 @@ -+/* Copyright (C) 2000-2002 Joakim Axelsson -+ * Patrick Schaaf -+ * Copyright (C) 2003-2004 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* Kernel module for IP set management */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define ASSERT_READ_LOCK(x) /* dont use that */ -+#define ASSERT_WRITE_LOCK(x) -+#include -+#include -+ -+static struct list_head set_type_list; /* all registered sets */ -+static struct ip_set **ip_set_list; /* all individual sets */ -+static DEFINE_RWLOCK(ip_set_lock); /* protects the lists and the hash */ -+static DECLARE_MUTEX(ip_set_app_mutex); /* serializes user access */ -+static ip_set_id_t ip_set_max = CONFIG_IP_NF_SET_MAX; -+static ip_set_id_t ip_set_bindings_hash_size = CONFIG_IP_NF_SET_HASHSIZE; -+static struct list_head *ip_set_hash; /* hash of bindings */ -+static unsigned int ip_set_hash_random; /* random seed */ -+ -+/* -+ * Sets are identified either by the index in ip_set_list or by id. -+ * The id never changes and is used to find a key in the hash. -+ * The index may change by swapping and used at all other places -+ * (set/SET netfilter modules, binding value, etc.) -+ * -+ * Userspace requests are serialized by ip_set_mutex and sets can -+ * be deleted only from userspace. Therefore ip_set_list locking -+ * must obey the following rules: -+ * -+ * - kernel requests: read and write locking mandatory -+ * - user requests: read locking optional, write locking mandatory -+ */ -+ -+static inline void -+__ip_set_get(ip_set_id_t index) -+{ -+ atomic_inc(&ip_set_list[index]->ref); -+} -+ -+static inline void -+__ip_set_put(ip_set_id_t index) -+{ -+ atomic_dec(&ip_set_list[index]->ref); -+} -+ -+/* -+ * Binding routines -+ */ -+ -+static inline int -+ip_hash_cmp(const struct ip_set_hash *set_hash, -+ ip_set_id_t id, ip_set_ip_t ip) -+{ -+ return set_hash->id == id && set_hash->ip == ip; -+} -+ -+static ip_set_id_t -+ip_set_find_in_hash(ip_set_id_t id, ip_set_ip_t ip) -+{ -+ u_int32_t key = jhash_2words(id, ip, ip_set_hash_random) -+ % ip_set_bindings_hash_size; -+ struct ip_set_hash *set_hash; -+ -+ ASSERT_READ_LOCK(&ip_set_lock); -+ IP_SET_ASSERT(ip_set_list[id]); -+ DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip)); -+ -+ set_hash = LIST_FIND(&ip_set_hash[key], ip_hash_cmp, -+ struct ip_set_hash *, id, ip); -+ -+ DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name, -+ HIPQUAD(ip), -+ set_hash != NULL ? ip_set_list[set_hash->binding]->name : ""); -+ -+ return (set_hash != NULL ? set_hash->binding : IP_SET_INVALID_ID); -+} -+ -+static inline void -+__set_hash_del(struct ip_set_hash *set_hash) -+{ -+ ASSERT_WRITE_LOCK(&ip_set_lock); -+ IP_SET_ASSERT(ip_set_list[set_hash->binding]); -+ -+ __ip_set_put(set_hash->binding); -+ list_del(&set_hash->list); -+ kfree(set_hash); -+} -+ -+static int -+ip_set_hash_del(ip_set_id_t id, ip_set_ip_t ip) -+{ -+ u_int32_t key = jhash_2words(id, ip, ip_set_hash_random) -+ % ip_set_bindings_hash_size; -+ struct ip_set_hash *set_hash; -+ -+ IP_SET_ASSERT(ip_set_list[id]); -+ DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip)); -+ write_lock_bh(&ip_set_lock); -+ set_hash = LIST_FIND(&ip_set_hash[key], ip_hash_cmp, -+ struct ip_set_hash *, id, ip); -+ DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name, -+ HIPQUAD(ip), -+ set_hash != NULL ? ip_set_list[set_hash->binding]->name : ""); -+ -+ if (set_hash != NULL) -+ __set_hash_del(set_hash); -+ write_unlock_bh(&ip_set_lock); -+ return 0; -+} -+ -+static int -+ip_set_hash_add(ip_set_id_t id, ip_set_ip_t ip, ip_set_id_t binding) -+{ -+ u_int32_t key = jhash_2words(id, ip, ip_set_hash_random) -+ % ip_set_bindings_hash_size; -+ struct ip_set_hash *set_hash; -+ int ret = 0; -+ -+ IP_SET_ASSERT(ip_set_list[id]); -+ IP_SET_ASSERT(ip_set_list[binding]); -+ DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name, -+ HIPQUAD(ip), ip_set_list[binding]->name); -+ write_lock_bh(&ip_set_lock); -+ set_hash = LIST_FIND(&ip_set_hash[key], ip_hash_cmp, -+ struct ip_set_hash *, id, ip); -+ if (!set_hash) { -+ set_hash = kmalloc(sizeof(struct ip_set_hash), GFP_KERNEL); -+ if (!set_hash) { -+ ret = -ENOMEM; -+ goto unlock; -+ } -+ INIT_LIST_HEAD(&set_hash->list); -+ set_hash->id = id; -+ set_hash->ip = ip; -+ list_add(&ip_set_hash[key], &set_hash->list); -+ } else { -+ IP_SET_ASSERT(ip_set_list[set_hash->binding]); -+ DP("overwrite binding: %s", -+ ip_set_list[set_hash->binding]->name); -+ __ip_set_put(set_hash->binding); -+ } -+ set_hash->binding = binding; -+ __ip_set_get(set_hash->binding); -+ unlock: -+ write_unlock_bh(&ip_set_lock); -+ return ret; -+} -+ -+#define FOREACH_HASH_DO(fn, args...) \ -+({ \ -+ ip_set_id_t __key; \ -+ struct ip_set_hash *__set_hash; \ -+ \ -+ for (__key = 0; __key < ip_set_bindings_hash_size; __key++) { \ -+ list_for_each_entry(__set_hash, &ip_set_hash[__key], list) \ -+ fn(__set_hash , ## args); \ -+ } \ -+}) -+ -+#define FOREACH_HASH_RW_DO(fn, args...) \ -+({ \ -+ ip_set_id_t __key; \ -+ struct ip_set_hash *__set_hash, *__n; \ -+ \ -+ ASSERT_WRITE_LOCK(&ip_set_lock); \ -+ for (__key = 0; __key < ip_set_bindings_hash_size; __key++) { \ -+ list_for_each_entry_safe(__set_hash, __n, &ip_set_hash[__key], list)\ -+ fn(__set_hash , ## args); \ -+ } \ -+}) -+ -+/* Add, del and test set entries from kernel */ -+ -+#define follow_bindings(index, set, ip) \ -+((index = ip_set_find_in_hash((set)->id, ip)) != IP_SET_INVALID_ID \ -+ || (index = (set)->binding) != IP_SET_INVALID_ID) -+ -+int -+ip_set_testip_kernel(ip_set_id_t index, -+ const struct sk_buff *skb, -+ const u_int32_t *flags) -+{ -+ struct ip_set *set; -+ ip_set_ip_t ip; -+ int res, i = 0; -+ -+ IP_SET_ASSERT(flags[i]); -+ read_lock_bh(&ip_set_lock); -+ do { -+ set = ip_set_list[index]; -+ IP_SET_ASSERT(set); -+ DP("set %s, index %u", set->name, index); -+ read_lock_bh(&set->lock); -+ res = set->type->testip_kernel(set, skb, flags[i], &ip); -+ read_unlock_bh(&set->lock); -+ } while (res > 0 -+ && flags[++i] -+ && follow_bindings(index, set, ip)); -+ read_unlock_bh(&ip_set_lock); -+ -+ return res; -+} -+ -+void -+ip_set_addip_kernel(ip_set_id_t index, -+ const struct sk_buff *skb, -+ const u_int32_t *flags) -+{ -+ struct ip_set *set; -+ ip_set_ip_t ip; -+ int res, i= 0; -+ -+ IP_SET_ASSERT(flags[i]); -+ retry: -+ read_lock_bh(&ip_set_lock); -+ do { -+ set = ip_set_list[index]; -+ IP_SET_ASSERT(set); -+ DP("set %s, index %u", set->name, index); -+ write_lock_bh(&set->lock); -+ res = set->type->addip_kernel(set, skb, flags[i], &ip); -+ write_unlock_bh(&set->lock); -+ } while ((res == 0 || res == -EEXIST) -+ && flags[++i] -+ && follow_bindings(index, set, ip)); -+ read_unlock_bh(&ip_set_lock); -+ -+ if (res == -EAGAIN -+ && set->type->retry -+ && (res = set->type->retry(set)) == 0) -+ goto retry; -+} -+ -+void -+ip_set_delip_kernel(ip_set_id_t index, -+ const struct sk_buff *skb, -+ const u_int32_t *flags) -+{ -+ struct ip_set *set; -+ ip_set_ip_t ip; -+ int res, i = 0; -+ -+ IP_SET_ASSERT(flags[i]); -+ read_lock_bh(&ip_set_lock); -+ do { -+ set = ip_set_list[index]; -+ IP_SET_ASSERT(set); -+ DP("set %s, index %u", set->name, index); -+ write_lock_bh(&set->lock); -+ res = set->type->delip_kernel(set, skb, flags[i], &ip); -+ write_unlock_bh(&set->lock); -+ } while ((res == 0 || res == -EEXIST) -+ && flags[++i] -+ && follow_bindings(index, set, ip)); -+ read_unlock_bh(&ip_set_lock); -+} -+ -+/* Register and deregister settype */ -+ -+static inline int -+set_type_equal(const struct ip_set_type *set_type, const char *str2) -+{ -+ return !strncmp(set_type->typename, str2, IP_SET_MAXNAMELEN - 1); -+} -+ -+static inline struct ip_set_type * -+find_set_type(const char *name) -+{ -+ return LIST_FIND(&set_type_list, -+ set_type_equal, -+ struct ip_set_type *, -+ name); -+} -+ -+int -+ip_set_register_set_type(struct ip_set_type *set_type) -+{ -+ int ret = 0; -+ -+ if (set_type->protocol_version != IP_SET_PROTOCOL_VERSION) { -+ ip_set_printk("'%s' uses wrong protocol version %u (want %u)", -+ set_type->typename, -+ set_type->protocol_version, -+ IP_SET_PROTOCOL_VERSION); -+ return -EINVAL; -+ } -+ -+ write_lock_bh(&ip_set_lock); -+ if (find_set_type(set_type->typename)) { -+ /* Duplicate! */ -+ ip_set_printk("'%s' already registered!", -+ set_type->typename); -+ ret = -EINVAL; -+ goto unlock; -+ } -+ if (!try_module_get(THIS_MODULE)) { -+ ret = -EFAULT; -+ goto unlock; -+ } -+ list_append(&set_type_list, set_type); -+ DP("'%s' registered.", set_type->typename); -+ unlock: -+ write_unlock_bh(&ip_set_lock); -+ return ret; -+} -+ -+void -+ip_set_unregister_set_type(struct ip_set_type *set_type) -+{ -+ write_lock_bh(&ip_set_lock); -+ if (!find_set_type(set_type->typename)) { -+ ip_set_printk("'%s' not registered?", -+ set_type->typename); -+ goto unlock; -+ } -+ LIST_DELETE(&set_type_list, set_type); -+ module_put(THIS_MODULE); -+ DP("'%s' unregistered.", set_type->typename); -+ unlock: -+ write_unlock_bh(&ip_set_lock); -+ -+} -+ -+/* -+ * Userspace routines -+ */ -+ -+/* -+ * Find set by name, reference it once. The reference makes sure the -+ * thing pointed to, does not go away under our feet. Drop the reference -+ * later, using ip_set_put(). -+ */ -+ip_set_id_t -+ip_set_get_byname(const char *name) -+{ -+ ip_set_id_t i, index = IP_SET_INVALID_ID; -+ -+ down(&ip_set_app_mutex); -+ for (i = 0; i < ip_set_max; i++) { -+ if (ip_set_list[i] != NULL -+ && strcmp(ip_set_list[i]->name, name) == 0) { -+ __ip_set_get(i); -+ index = i; -+ break; -+ } -+ } -+ up(&ip_set_app_mutex); -+ return index; -+} -+ -+/* -+ * Find set by index, reference it once. The reference makes sure the -+ * thing pointed to, does not go away under our feet. Drop the reference -+ * later, using ip_set_put(). -+ */ -+ip_set_id_t -+ip_set_get_byindex(ip_set_id_t index) -+{ -+ down(&ip_set_app_mutex); -+ -+ if (index >= ip_set_max) -+ return IP_SET_INVALID_ID; -+ -+ if (ip_set_list[index]) -+ __ip_set_get(index); -+ else -+ index = IP_SET_INVALID_ID; -+ -+ up(&ip_set_app_mutex); -+ return index; -+} -+ -+/* -+ * If the given set pointer points to a valid set, decrement -+ * reference count by 1. The caller shall not assume the index -+ * to be valid, after calling this function. -+ */ -+void ip_set_put(ip_set_id_t index) -+{ -+ down(&ip_set_app_mutex); -+ if (ip_set_list[index]) -+ __ip_set_put(index); -+ up(&ip_set_app_mutex); -+} -+ -+/* Find a set by name or index */ -+static ip_set_id_t -+ip_set_find_byname(const char *name) -+{ -+ ip_set_id_t i, index = IP_SET_INVALID_ID; -+ -+ for (i = 0; i < ip_set_max; i++) { -+ if (ip_set_list[i] != NULL -+ && strcmp(ip_set_list[i]->name, name) == 0) { -+ index = i; -+ break; -+ } -+ } -+ return index; -+} -+ -+static ip_set_id_t -+ip_set_find_byindex(ip_set_id_t index) -+{ -+ if (index >= ip_set_max || ip_set_list[index] == NULL) -+ index = IP_SET_INVALID_ID; -+ -+ return index; -+} -+ -+/* -+ * Add, del, test, bind and unbind -+ */ -+ -+static inline int -+__ip_set_testip(struct ip_set *set, -+ const void *data, -+ size_t size, -+ ip_set_ip_t *ip) -+{ -+ int res; -+ -+ read_lock_bh(&set->lock); -+ res = set->type->testip(set, data, size, ip); -+ read_unlock_bh(&set->lock); -+ -+ return res; -+} -+ -+static int -+__ip_set_addip(ip_set_id_t index, -+ const void *data, -+ size_t size) -+{ -+ struct ip_set *set = ip_set_list[index]; -+ ip_set_ip_t ip; -+ int res; -+ -+ IP_SET_ASSERT(set); -+ do { -+ write_lock_bh(&set->lock); -+ res = set->type->addip(set, data, size, &ip); -+ write_unlock_bh(&set->lock); -+ } while (res == -EAGAIN -+ && set->type->retry -+ && (res = set->type->retry(set)) == 0); -+ -+ return res; -+} -+ -+static int -+ip_set_addip(ip_set_id_t index, -+ const void *data, -+ size_t size) -+{ -+ -+ return __ip_set_addip(index, -+ data + sizeof(struct ip_set_req_adt), -+ size - sizeof(struct ip_set_req_adt)); -+} -+ -+static int -+ip_set_delip(ip_set_id_t index, -+ const void *data, -+ size_t size) -+{ -+ struct ip_set *set = ip_set_list[index]; -+ ip_set_ip_t ip; -+ int res; -+ -+ IP_SET_ASSERT(set); -+ write_lock_bh(&set->lock); -+ res = set->type->delip(set, -+ data + sizeof(struct ip_set_req_adt), -+ size - sizeof(struct ip_set_req_adt), -+ &ip); -+ write_unlock_bh(&set->lock); -+ -+ return res; -+} -+ -+static int -+ip_set_testip(ip_set_id_t index, -+ const void *data, -+ size_t size) -+{ -+ struct ip_set *set = ip_set_list[index]; -+ ip_set_ip_t ip; -+ int res; -+ -+ IP_SET_ASSERT(set); -+ res = __ip_set_testip(set, -+ data + sizeof(struct ip_set_req_adt), -+ size - sizeof(struct ip_set_req_adt), -+ &ip); -+ -+ return (res > 0 ? -EEXIST : res); -+} -+ -+static int -+ip_set_bindip(ip_set_id_t index, -+ const void *data, -+ size_t size) -+{ -+ struct ip_set *set = ip_set_list[index]; -+ struct ip_set_req_bind *req_bind; -+ ip_set_id_t binding; -+ ip_set_ip_t ip; -+ int res; -+ -+ IP_SET_ASSERT(set); -+ if (size < sizeof(struct ip_set_req_bind)) -+ return -EINVAL; -+ -+ req_bind = (struct ip_set_req_bind *) data; -+ req_bind->binding[IP_SET_MAXNAMELEN - 1] = '\0'; -+ -+ if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) { -+ /* Default binding of a set */ -+ char *binding_name; -+ -+ if (size != sizeof(struct ip_set_req_bind) + IP_SET_MAXNAMELEN) -+ return -EINVAL; -+ -+ binding_name = (char *)(data + sizeof(struct ip_set_req_bind)); -+ binding_name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ -+ binding = ip_set_find_byname(binding_name); -+ if (binding == IP_SET_INVALID_ID) -+ return -ENOENT; -+ -+ write_lock_bh(&ip_set_lock); -+ /* Sets as binding values are referenced */ -+ if (set->binding != IP_SET_INVALID_ID) -+ __ip_set_put(set->binding); -+ set->binding = binding; -+ __ip_set_get(set->binding); -+ write_unlock_bh(&ip_set_lock); -+ -+ return 0; -+ } -+ binding = ip_set_find_byname(req_bind->binding); -+ if (binding == IP_SET_INVALID_ID) -+ return -ENOENT; -+ -+ res = __ip_set_testip(set, -+ data + sizeof(struct ip_set_req_bind), -+ size - sizeof(struct ip_set_req_bind), -+ &ip); -+ DP("set %s, ip: %u.%u.%u.%u, binding %s", -+ set->name, HIPQUAD(ip), ip_set_list[binding]->name); -+ -+ if (res >= 0) -+ res = ip_set_hash_add(set->id, ip, binding); -+ -+ return res; -+} -+ -+#define FOREACH_SET_DO(fn, args...) \ -+({ \ -+ ip_set_id_t __i; \ -+ struct ip_set *__set; \ -+ \ -+ for (__i = 0; __i < ip_set_max; __i++) { \ -+ __set = ip_set_list[__i]; \ -+ if (__set != NULL) \ -+ fn(__set , ##args); \ -+ } \ -+}) -+ -+static inline void -+__set_hash_del_byid(struct ip_set_hash *set_hash, ip_set_id_t id) -+{ -+ if (set_hash->id == id) -+ __set_hash_del(set_hash); -+} -+ -+static inline void -+__unbind_default(struct ip_set *set) -+{ -+ if (set->binding != IP_SET_INVALID_ID) { -+ /* Sets as binding values are referenced */ -+ __ip_set_put(set->binding); -+ set->binding = IP_SET_INVALID_ID; -+ } -+} -+ -+static int -+ip_set_unbindip(ip_set_id_t index, -+ const void *data, -+ size_t size) -+{ -+ struct ip_set *set; -+ struct ip_set_req_bind *req_bind; -+ ip_set_ip_t ip; -+ int res; -+ -+ DP(""); -+ if (size < sizeof(struct ip_set_req_bind)) -+ return -EINVAL; -+ -+ req_bind = (struct ip_set_req_bind *) data; -+ req_bind->binding[IP_SET_MAXNAMELEN - 1] = '\0'; -+ -+ DP("%u %s", index, req_bind->binding); -+ if (index == IP_SET_INVALID_ID) { -+ /* unbind :all: */ -+ if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) { -+ /* Default binding of sets */ -+ write_lock_bh(&ip_set_lock); -+ FOREACH_SET_DO(__unbind_default); -+ write_unlock_bh(&ip_set_lock); -+ return 0; -+ } else if (strcmp(req_bind->binding, IPSET_TOKEN_ALL) == 0) { -+ /* Flush all bindings of all sets*/ -+ write_lock_bh(&ip_set_lock); -+ FOREACH_HASH_RW_DO(__set_hash_del); -+ write_unlock_bh(&ip_set_lock); -+ return 0; -+ } -+ DP("unreachable reached!"); -+ return -EINVAL; -+ } -+ -+ set = ip_set_list[index]; -+ IP_SET_ASSERT(set); -+ if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) { -+ /* Default binding of set */ -+ ip_set_id_t binding = ip_set_find_byindex(set->binding); -+ -+ if (binding == IP_SET_INVALID_ID) -+ return -ENOENT; -+ -+ write_lock_bh(&ip_set_lock); -+ /* Sets in hash values are referenced */ -+ __ip_set_put(set->binding); -+ set->binding = IP_SET_INVALID_ID; -+ write_unlock_bh(&ip_set_lock); -+ -+ return 0; -+ } else if (strcmp(req_bind->binding, IPSET_TOKEN_ALL) == 0) { -+ /* Flush all bindings */ -+ -+ write_lock_bh(&ip_set_lock); -+ FOREACH_HASH_RW_DO(__set_hash_del_byid, set->id); -+ write_unlock_bh(&ip_set_lock); -+ return 0; -+ } -+ -+ res = __ip_set_testip(set, -+ data + sizeof(struct ip_set_req_bind), -+ size - sizeof(struct ip_set_req_bind), -+ &ip); -+ -+ DP("set %s, ip: %u.%u.%u.%u", set->name, HIPQUAD(ip)); -+ if (res >= 0) -+ res = ip_set_hash_del(set->id, ip); -+ -+ return res; -+} -+ -+static int -+ip_set_testbind(ip_set_id_t index, -+ const void *data, -+ size_t size) -+{ -+ struct ip_set *set = ip_set_list[index]; -+ struct ip_set_req_bind *req_bind; -+ ip_set_id_t binding; -+ ip_set_ip_t ip; -+ int res; -+ -+ IP_SET_ASSERT(set); -+ if (size < sizeof(struct ip_set_req_bind)) -+ return -EINVAL; -+ -+ req_bind = (struct ip_set_req_bind *) data; -+ req_bind->binding[IP_SET_MAXNAMELEN - 1] = '\0'; -+ -+ if (strcmp(req_bind->binding, IPSET_TOKEN_DEFAULT) == 0) { -+ /* Default binding of set */ -+ char *binding_name; -+ -+ if (size != sizeof(struct ip_set_req_bind) + IP_SET_MAXNAMELEN) -+ return -EINVAL; -+ -+ binding_name = (char *)(data + sizeof(struct ip_set_req_bind)); -+ binding_name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ -+ binding = ip_set_find_byname(binding_name); -+ if (binding == IP_SET_INVALID_ID) -+ return -ENOENT; -+ -+ res = (set->binding == binding) ? -EEXIST : 0; -+ -+ return res; -+ } -+ binding = ip_set_find_byname(req_bind->binding); -+ if (binding == IP_SET_INVALID_ID) -+ return -ENOENT; -+ -+ -+ res = __ip_set_testip(set, -+ data + sizeof(struct ip_set_req_bind), -+ size - sizeof(struct ip_set_req_bind), -+ &ip); -+ DP("set %s, ip: %u.%u.%u.%u, binding %s", -+ set->name, HIPQUAD(ip), ip_set_list[binding]->name); -+ -+ if (res >= 0) -+ res = (ip_set_find_in_hash(set->id, ip) == binding) -+ ? -EEXIST : 0; -+ -+ return res; -+} -+ -+static struct ip_set_type * -+find_set_type_rlock(const char *typename) -+{ -+ struct ip_set_type *type; -+ -+ read_lock_bh(&ip_set_lock); -+ type = find_set_type(typename); -+ if (type == NULL) -+ read_unlock_bh(&ip_set_lock); -+ -+ return type; -+} -+ -+static int -+find_free_id(const char *name, -+ ip_set_id_t *index, -+ ip_set_id_t *id) -+{ -+ ip_set_id_t i; -+ -+ *id = IP_SET_INVALID_ID; -+ for (i = 0; i < ip_set_max; i++) { -+ if (ip_set_list[i] == NULL) { -+ if (*id == IP_SET_INVALID_ID) -+ *id = *index = i; -+ } else if (strcmp(name, ip_set_list[i]->name) == 0) -+ /* Name clash */ -+ return -EEXIST; -+ } -+ if (*id == IP_SET_INVALID_ID) -+ /* No free slot remained */ -+ return -ERANGE; -+ /* Check that index is usable as id (swapping) */ -+ check: -+ for (i = 0; i < ip_set_max; i++) { -+ if (ip_set_list[i] != NULL -+ && ip_set_list[i]->id == *id) { -+ *id = i; -+ goto check; -+ } -+ } -+ return 0; -+} -+ -+/* -+ * Create a set -+ */ -+static int -+ip_set_create(const char *name, -+ const char *typename, -+ ip_set_id_t restore, -+ const void *data, -+ size_t size) -+{ -+ struct ip_set *set; -+ ip_set_id_t index, id; -+ int res = 0; -+ -+ DP("setname: %s, typename: %s, id: %u", name, typename, restore); -+ /* -+ * First, and without any locks, allocate and initialize -+ * a normal base set structure. -+ */ -+ set = kmalloc(sizeof(struct ip_set), GFP_KERNEL); -+ if (!set) -+ return -ENOMEM; -+ set->lock = RW_LOCK_UNLOCKED; -+ strncpy(set->name, name, IP_SET_MAXNAMELEN); -+ set->binding = IP_SET_INVALID_ID; -+ atomic_set(&set->ref, 0); -+ -+ /* -+ * Next, take the &ip_set_lock, check that we know the type, -+ * and take a reference on the type, to make sure it -+ * stays available while constructing our new set. -+ * -+ * After referencing the type, we drop the &ip_set_lock, -+ * and let the new set construction run without locks. -+ */ -+ set->type = find_set_type_rlock(typename); -+ if (set->type == NULL) { -+ /* Try loading the module */ -+ char modulename[IP_SET_MAXNAMELEN + strlen("ip_set_") + 1]; -+ strcpy(modulename, "ip_set_"); -+ strcat(modulename, typename); -+ DP("try to load %s", modulename); -+ request_module(modulename); -+ set->type = find_set_type_rlock(typename); -+ } -+ if (set->type == NULL) { -+ ip_set_printk("no set type '%s', set '%s' not created", -+ typename, name); -+ res = -ENOENT; -+ goto out; -+ } -+ if (!try_module_get(set->type->me)) { -+ read_unlock_bh(&ip_set_lock); -+ res = -EFAULT; -+ goto out; -+ } -+ read_unlock_bh(&ip_set_lock); -+ -+ /* -+ * Without holding any locks, create private part. -+ */ -+ res = set->type->create(set, data, size); -+ if (res != 0) -+ goto put_out; -+ -+ /* BTW, res==0 here. */ -+ -+ /* -+ * Here, we have a valid, constructed set. &ip_set_lock again, -+ * find free id/index and check that it is not already in -+ * ip_set_list. -+ */ -+ write_lock_bh(&ip_set_lock); -+ if ((res = find_free_id(set->name, &index, &id)) != 0) { -+ DP("no free id!"); -+ goto cleanup; -+ } -+ -+ /* Make sure restore gets the same index */ -+ if (restore != IP_SET_INVALID_ID && index != restore) { -+ DP("Can't restore, sets are screwed up"); -+ res = -ERANGE; -+ goto cleanup; -+ } -+ -+ /* -+ * Finally! Add our shiny new set to the list, and be done. -+ */ -+ DP("create: '%s' created with index %u, id %u!", set->name, index, id); -+ set->id = id; -+ ip_set_list[index] = set; -+ write_unlock_bh(&ip_set_lock); -+ return res; -+ -+ cleanup: -+ write_unlock_bh(&ip_set_lock); -+ set->type->destroy(set); -+ put_out: -+ module_put(set->type->me); -+ out: -+ kfree(set); -+ return res; -+} -+ -+/* -+ * Destroy a given existing set -+ */ -+static void -+ip_set_destroy_set(ip_set_id_t index) -+{ -+ struct ip_set *set = ip_set_list[index]; -+ -+ IP_SET_ASSERT(set); -+ DP("set: %s", set->name); -+ write_lock_bh(&ip_set_lock); -+ FOREACH_HASH_RW_DO(__set_hash_del_byid, set->id); -+ if (set->binding != IP_SET_INVALID_ID) -+ __ip_set_put(set->binding); -+ ip_set_list[index] = NULL; -+ write_unlock_bh(&ip_set_lock); -+ -+ /* Must call it without holding any lock */ -+ set->type->destroy(set); -+ module_put(set->type->me); -+ kfree(set); -+} -+ -+/* -+ * Destroy a set - or all sets -+ * Sets must not be referenced/used. -+ */ -+static int -+ip_set_destroy(ip_set_id_t index) -+{ -+ ip_set_id_t i; -+ -+ /* ref modification always protected by the mutex */ -+ if (index != IP_SET_INVALID_ID) { -+ if (atomic_read(&ip_set_list[index]->ref)) -+ return -EBUSY; -+ ip_set_destroy_set(index); -+ } else { -+ for (i = 0; i < ip_set_max; i++) { -+ if (ip_set_list[i] != NULL -+ && (atomic_read(&ip_set_list[i]->ref))) -+ return -EBUSY; -+ } -+ -+ for (i = 0; i < ip_set_max; i++) { -+ if (ip_set_list[i] != NULL) -+ ip_set_destroy_set(i); -+ } -+ } -+ return 0; -+} -+ -+static void -+ip_set_flush_set(struct ip_set *set) -+{ -+ DP("set: %s %u", set->name, set->id); -+ -+ write_lock_bh(&set->lock); -+ set->type->flush(set); -+ write_unlock_bh(&set->lock); -+} -+ -+/* -+ * Flush data in a set - or in all sets -+ */ -+static int -+ip_set_flush(ip_set_id_t index) -+{ -+ if (index != IP_SET_INVALID_ID) { -+ IP_SET_ASSERT(ip_set_list[index]); -+ ip_set_flush_set(ip_set_list[index]); -+ } else -+ FOREACH_SET_DO(ip_set_flush_set); -+ -+ return 0; -+} -+ -+/* Rename a set */ -+static int -+ip_set_rename(ip_set_id_t index, const char *name) -+{ -+ struct ip_set *set = ip_set_list[index]; -+ ip_set_id_t i; -+ int res = 0; -+ -+ DP("set: %s to %s", set->name, name); -+ write_lock_bh(&ip_set_lock); -+ for (i = 0; i < ip_set_max; i++) { -+ if (ip_set_list[i] != NULL -+ && strncmp(ip_set_list[i]->name, -+ name, -+ IP_SET_MAXNAMELEN - 1) == 0) { -+ res = -EEXIST; -+ goto unlock; -+ } -+ } -+ strncpy(set->name, name, IP_SET_MAXNAMELEN); -+ unlock: -+ write_unlock_bh(&ip_set_lock); -+ return res; -+} -+ -+/* -+ * Swap two sets so that name/index points to the other. -+ * References are also swapped. -+ */ -+static int -+ip_set_swap(ip_set_id_t from_index, ip_set_id_t to_index) -+{ -+ struct ip_set *from = ip_set_list[from_index]; -+ struct ip_set *to = ip_set_list[to_index]; -+ char from_name[IP_SET_MAXNAMELEN]; -+ u_int32_t from_ref; -+ -+ DP("set: %s to %s", from->name, to->name); -+ /* Type can't be changed. Artifical restriction. */ -+ if (from->type->typecode != to->type->typecode) -+ return -ENOEXEC; -+ -+ /* No magic here: ref munging protected by the mutex */ -+ write_lock_bh(&ip_set_lock); -+ strncpy(from_name, from->name, IP_SET_MAXNAMELEN); -+ from_ref = atomic_read(&from->ref); -+ -+ strncpy(from->name, to->name, IP_SET_MAXNAMELEN); -+ atomic_set(&from->ref, atomic_read(&to->ref)); -+ strncpy(to->name, from_name, IP_SET_MAXNAMELEN); -+ atomic_set(&to->ref, from_ref); -+ -+ ip_set_list[from_index] = to; -+ ip_set_list[to_index] = from; -+ -+ write_unlock_bh(&ip_set_lock); -+ return 0; -+} -+ -+/* -+ * List set data -+ */ -+ -+static inline void -+__set_hash_bindings_size_list(struct ip_set_hash *set_hash, -+ ip_set_id_t id, size_t *size) -+{ -+ if (set_hash->id == id) -+ *size += sizeof(struct ip_set_hash_list); -+} -+ -+static inline void -+__set_hash_bindings_size_save(struct ip_set_hash *set_hash, -+ ip_set_id_t id, size_t *size) -+{ -+ if (set_hash->id == id) -+ *size += sizeof(struct ip_set_hash_save); -+} -+ -+static inline void -+__set_hash_bindings(struct ip_set_hash *set_hash, -+ ip_set_id_t id, void *data, int *used) -+{ -+ if (set_hash->id == id) { -+ struct ip_set_hash_list *hash_list = -+ (struct ip_set_hash_list *)(data + *used); -+ -+ hash_list->ip = set_hash->ip; -+ hash_list->binding = set_hash->binding; -+ *used += sizeof(struct ip_set_hash_list); -+ } -+} -+ -+static int ip_set_list_set(ip_set_id_t index, -+ void *data, -+ int *used, -+ int len) -+{ -+ struct ip_set *set = ip_set_list[index]; -+ struct ip_set_list *set_list; -+ -+ /* Pointer to our header */ -+ set_list = (struct ip_set_list *) (data + *used); -+ -+ DP("set: %s, used: %d %p %p", set->name, *used, data, data + *used); -+ -+ /* Get and ensure header size */ -+ if (*used + sizeof(struct ip_set_list) > len) -+ goto not_enough_mem; -+ *used += sizeof(struct ip_set_list); -+ -+ read_lock_bh(&set->lock); -+ /* Get and ensure set specific header size */ -+ set_list->header_size = set->type->header_size; -+ if (*used + set_list->header_size > len) -+ goto unlock_set; -+ -+ /* Fill in the header */ -+ set_list->index = index; -+ set_list->binding = set->binding; -+ set_list->ref = atomic_read(&set->ref); -+ -+ /* Fill in set spefific header data */ -+ set->type->list_header(set, data + *used); -+ *used += set_list->header_size; -+ -+ /* Get and ensure set specific members size */ -+ set_list->members_size = set->type->list_members_size(set); -+ if (*used + set_list->members_size > len) -+ goto unlock_set; -+ -+ /* Fill in set spefific members data */ -+ set->type->list_members(set, data + *used); -+ *used += set_list->members_size; -+ read_unlock_bh(&set->lock); -+ -+ /* Bindings */ -+ -+ /* Get and ensure set specific bindings size */ -+ set_list->bindings_size = 0; -+ FOREACH_HASH_DO(__set_hash_bindings_size_list, -+ set->id, &set_list->bindings_size); -+ if (*used + set_list->bindings_size > len) -+ goto not_enough_mem; -+ -+ /* Fill in set spefific bindings data */ -+ FOREACH_HASH_DO(__set_hash_bindings, set->id, data, used); -+ -+ return 0; -+ -+ unlock_set: -+ read_unlock_bh(&set->lock); -+ not_enough_mem: -+ DP("not enough mem, try again"); -+ return -EAGAIN; -+} -+ -+/* -+ * Save sets -+ */ -+static int ip_set_save_set(ip_set_id_t index, -+ void *data, -+ int *used, -+ int len) -+{ -+ struct ip_set *set; -+ struct ip_set_save *set_save; -+ -+ /* Pointer to our header */ -+ set_save = (struct ip_set_save *) (data + *used); -+ -+ /* Get and ensure header size */ -+ if (*used + sizeof(struct ip_set_save) > len) -+ goto not_enough_mem; -+ *used += sizeof(struct ip_set_save); -+ -+ set = ip_set_list[index]; -+ DP("set: %s, used: %u(%u) %p %p", set->name, *used, len, -+ data, data + *used); -+ -+ read_lock_bh(&set->lock); -+ /* Get and ensure set specific header size */ -+ set_save->header_size = set->type->header_size; -+ if (*used + set_save->header_size > len) -+ goto unlock_set; -+ -+ /* Fill in the header */ -+ set_save->index = index; -+ set_save->binding = set->binding; -+ -+ /* Fill in set spefific header data */ -+ set->type->list_header(set, data + *used); -+ *used += set_save->header_size; -+ -+ DP("set header filled: %s, used: %u %p %p", set->name, *used, -+ data, data + *used); -+ /* Get and ensure set specific members size */ -+ set_save->members_size = set->type->list_members_size(set); -+ if (*used + set_save->members_size > len) -+ goto unlock_set; -+ -+ /* Fill in set spefific members data */ -+ set->type->list_members(set, data + *used); -+ *used += set_save->members_size; -+ read_unlock_bh(&set->lock); -+ DP("set members filled: %s, used: %u %p %p", set->name, *used, -+ data, data + *used); -+ return 0; -+ -+ unlock_set: -+ read_unlock_bh(&set->lock); -+ not_enough_mem: -+ DP("not enough mem, try again"); -+ return -EAGAIN; -+} -+ -+static inline void -+__set_hash_save_bindings(struct ip_set_hash *set_hash, -+ ip_set_id_t id, -+ void *data, -+ int *used, -+ int len, -+ int *res) -+{ -+ if (*res == 0 -+ && (id == IP_SET_INVALID_ID || set_hash->id == id)) { -+ struct ip_set_hash_save *hash_save = -+ (struct ip_set_hash_save *)(data + *used); -+ /* Ensure bindings size */ -+ if (*used + sizeof(struct ip_set_hash_save) > len) { -+ *res = -ENOMEM; -+ return; -+ } -+ hash_save->id = set_hash->id; -+ hash_save->ip = set_hash->ip; -+ hash_save->binding = set_hash->binding; -+ *used += sizeof(struct ip_set_hash_save); -+ } -+} -+ -+static int ip_set_save_bindings(ip_set_id_t index, -+ void *data, -+ int *used, -+ int len) -+{ -+ int res = 0; -+ struct ip_set_save *set_save; -+ -+ DP("used %u, len %u", *used, len); -+ /* Get and ensure header size */ -+ if (*used + sizeof(struct ip_set_save) > len) -+ return -ENOMEM; -+ -+ /* Marker */ -+ set_save = (struct ip_set_save *) (data + *used); -+ set_save->index = IP_SET_INVALID_ID; -+ *used += sizeof(struct ip_set_save); -+ -+ DP("marker added used %u, len %u", *used, len); -+ /* Fill in bindings data */ -+ if (index != IP_SET_INVALID_ID) -+ /* Sets are identified by id in hash */ -+ index = ip_set_list[index]->id; -+ FOREACH_HASH_DO(__set_hash_save_bindings, index, data, used, len, &res); -+ -+ return res; -+} -+ -+/* -+ * Restore sets -+ */ -+static int ip_set_restore(void *data, -+ int len) -+{ -+ int res = 0; -+ int line = 0, used = 0, members_size; -+ struct ip_set *set; -+ struct ip_set_hash_save *hash_save; -+ struct ip_set_restore *set_restore; -+ ip_set_id_t index; -+ -+ /* Loop to restore sets */ -+ while (1) { -+ line++; -+ -+ DP("%u %u %u", used, sizeof(struct ip_set_restore), len); -+ /* Get and ensure header size */ -+ if (used + sizeof(struct ip_set_restore) > len) -+ return line; -+ set_restore = (struct ip_set_restore *) (data + used); -+ used += sizeof(struct ip_set_restore); -+ -+ /* Ensure data size */ -+ if (used -+ + set_restore->header_size -+ + set_restore->members_size > len) -+ return line; -+ -+ /* Check marker */ -+ if (set_restore->index == IP_SET_INVALID_ID) { -+ line--; -+ goto bindings; -+ } -+ -+ /* Try to create the set */ -+ DP("restore %s %s", set_restore->name, set_restore->typename); -+ res = ip_set_create(set_restore->name, -+ set_restore->typename, -+ set_restore->index, -+ data + used, -+ set_restore->header_size); -+ -+ if (res != 0) -+ return line; -+ used += set_restore->header_size; -+ -+ index = ip_set_find_byindex(set_restore->index); -+ DP("index %u, restore_index %u", index, set_restore->index); -+ if (index != set_restore->index) -+ return line; -+ /* Try to restore members data */ -+ set = ip_set_list[index]; -+ members_size = 0; -+ DP("members_size %u reqsize %u", -+ set_restore->members_size, set->type->reqsize); -+ while (members_size + set->type->reqsize <= -+ set_restore->members_size) { -+ line++; -+ DP("members: %u, line %u", members_size, line); -+ res = __ip_set_addip(index, -+ data + used + members_size, -+ set->type->reqsize); -+ if (!(res == 0 || res == -EEXIST)) -+ return line; -+ members_size += set->type->reqsize; -+ } -+ -+ DP("members_size %u %u", -+ set_restore->members_size, members_size); -+ if (members_size != set_restore->members_size) -+ return line++; -+ used += set_restore->members_size; -+ } -+ -+ bindings: -+ /* Loop to restore bindings */ -+ while (used < len) { -+ line++; -+ -+ DP("restore binding, line %u", line); -+ /* Get and ensure size */ -+ if (used + sizeof(struct ip_set_hash_save) > len) -+ return line; -+ hash_save = (struct ip_set_hash_save *) (data + used); -+ used += sizeof(struct ip_set_hash_save); -+ -+ /* hash_save->id is used to store the index */ -+ index = ip_set_find_byindex(hash_save->id); -+ DP("restore binding index %u, id %u, %u -> %u", -+ index, hash_save->id, hash_save->ip, hash_save->binding); -+ if (index != hash_save->id) -+ return line; -+ -+ set = ip_set_list[hash_save->id]; -+ /* Null valued IP means default binding */ -+ if (hash_save->ip) -+ res = ip_set_hash_add(set->id, -+ hash_save->ip, -+ hash_save->binding); -+ else { -+ IP_SET_ASSERT(set->binding == IP_SET_INVALID_ID); -+ write_lock_bh(&ip_set_lock); -+ set->binding = hash_save->binding; -+ __ip_set_get(set->binding); -+ write_unlock_bh(&ip_set_lock); -+ DP("default binding: %u", set->binding); -+ } -+ if (res != 0) -+ return line; -+ } -+ if (used != len) -+ return line; -+ -+ return 0; -+} -+ -+static int -+ip_set_sockfn_set(struct sock *sk, int optval, void *user, unsigned int len) -+{ -+ void *data; -+ int res = 0; /* Assume OK */ -+ unsigned *op; -+ struct ip_set_req_adt *req_adt; -+ ip_set_id_t index = IP_SET_INVALID_ID; -+ int (*adtfn)(ip_set_id_t index, -+ const void *data, size_t size); -+ struct fn_table { -+ int (*fn)(ip_set_id_t index, -+ const void *data, size_t size); -+ } adtfn_table[] = -+ { { ip_set_addip }, { ip_set_delip }, { ip_set_testip}, -+ { ip_set_bindip}, { ip_set_unbindip }, { ip_set_testbind }, -+ }; -+ -+ DP("optval=%d, user=%p, len=%d", optval, user, len); -+ if (!capable(CAP_NET_ADMIN)) -+ return -EPERM; -+ if (optval != SO_IP_SET) -+ return -EBADF; -+ if (len <= sizeof(unsigned)) { -+ ip_set_printk("short userdata (want >%zu, got %u)", -+ sizeof(unsigned), len); -+ return -EINVAL; -+ } -+ data = vmalloc(len); -+ if (!data) { -+ DP("out of mem for %u bytes", len); -+ return -ENOMEM; -+ } -+ if (copy_from_user(data, user, len) != 0) { -+ res = -EFAULT; -+ goto done; -+ } -+ if (down_interruptible(&ip_set_app_mutex)) { -+ res = -EINTR; -+ goto done; -+ } -+ -+ op = (unsigned *)data; -+ DP("op=%x", *op); -+ -+ if (*op < IP_SET_OP_VERSION) { -+ /* Check the version at the beginning of operations */ -+ struct ip_set_req_version *req_version = -+ (struct ip_set_req_version *) data; -+ if (req_version->version != IP_SET_PROTOCOL_VERSION) { -+ res = -EPROTO; -+ goto done; -+ } -+ } -+ -+ switch (*op) { -+ case IP_SET_OP_CREATE:{ -+ struct ip_set_req_create *req_create -+ = (struct ip_set_req_create *) data; -+ -+ if (len <= sizeof(struct ip_set_req_create)) { -+ ip_set_printk("short CREATE data (want >%zu, got %u)", -+ sizeof(struct ip_set_req_create), len); -+ res = -EINVAL; -+ goto done; -+ } -+ req_create->name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ req_create->typename[IP_SET_MAXNAMELEN - 1] = '\0'; -+ res = ip_set_create(req_create->name, -+ req_create->typename, -+ IP_SET_INVALID_ID, -+ data + sizeof(struct ip_set_req_create), -+ len - sizeof(struct ip_set_req_create)); -+ goto done; -+ } -+ case IP_SET_OP_DESTROY:{ -+ struct ip_set_req_std *req_destroy -+ = (struct ip_set_req_std *) data; -+ -+ if (len != sizeof(struct ip_set_req_std)) { -+ ip_set_printk("invalid DESTROY data (want %zu, got %u)", -+ sizeof(struct ip_set_req_std), len); -+ res = -EINVAL; -+ goto done; -+ } -+ if (strcmp(req_destroy->name, IPSET_TOKEN_ALL) == 0) { -+ /* Destroy all sets */ -+ index = IP_SET_INVALID_ID; -+ } else { -+ req_destroy->name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ index = ip_set_find_byname(req_destroy->name); -+ -+ if (index == IP_SET_INVALID_ID) { -+ res = -ENOENT; -+ goto done; -+ } -+ } -+ -+ res = ip_set_destroy(index); -+ goto done; -+ } -+ case IP_SET_OP_FLUSH:{ -+ struct ip_set_req_std *req_flush = -+ (struct ip_set_req_std *) data; -+ -+ if (len != sizeof(struct ip_set_req_std)) { -+ ip_set_printk("invalid FLUSH data (want %zu, got %u)", -+ sizeof(struct ip_set_req_std), len); -+ res = -EINVAL; -+ goto done; -+ } -+ if (strcmp(req_flush->name, IPSET_TOKEN_ALL) == 0) { -+ /* Flush all sets */ -+ index = IP_SET_INVALID_ID; -+ } else { -+ req_flush->name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ index = ip_set_find_byname(req_flush->name); -+ -+ if (index == IP_SET_INVALID_ID) { -+ res = -ENOENT; -+ goto done; -+ } -+ } -+ res = ip_set_flush(index); -+ goto done; -+ } -+ case IP_SET_OP_RENAME:{ -+ struct ip_set_req_create *req_rename -+ = (struct ip_set_req_create *) data; -+ -+ if (len != sizeof(struct ip_set_req_create)) { -+ ip_set_printk("invalid RENAME data (want %zu, got %u)", -+ sizeof(struct ip_set_req_create), len); -+ res = -EINVAL; -+ goto done; -+ } -+ -+ req_rename->name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ req_rename->typename[IP_SET_MAXNAMELEN - 1] = '\0'; -+ -+ index = ip_set_find_byname(req_rename->name); -+ if (index == IP_SET_INVALID_ID) { -+ res = -ENOENT; -+ goto done; -+ } -+ res = ip_set_rename(index, req_rename->typename); -+ goto done; -+ } -+ case IP_SET_OP_SWAP:{ -+ struct ip_set_req_create *req_swap -+ = (struct ip_set_req_create *) data; -+ ip_set_id_t to_index; -+ -+ if (len != sizeof(struct ip_set_req_create)) { -+ ip_set_printk("invalid SWAP data (want %zu, got %u)", -+ sizeof(struct ip_set_req_create), len); -+ res = -EINVAL; -+ goto done; -+ } -+ -+ req_swap->name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ req_swap->typename[IP_SET_MAXNAMELEN - 1] = '\0'; -+ -+ index = ip_set_find_byname(req_swap->name); -+ if (index == IP_SET_INVALID_ID) { -+ res = -ENOENT; -+ goto done; -+ } -+ to_index = ip_set_find_byname(req_swap->typename); -+ if (to_index == IP_SET_INVALID_ID) { -+ res = -ENOENT; -+ goto done; -+ } -+ res = ip_set_swap(index, to_index); -+ goto done; -+ } -+ default: -+ break; /* Set identified by id */ -+ } -+ -+ /* There we may have add/del/test/bind/unbind/test_bind operations */ -+ if (*op < IP_SET_OP_ADD_IP || *op > IP_SET_OP_TEST_BIND_SET) { -+ res = -EBADMSG; -+ goto done; -+ } -+ adtfn = adtfn_table[*op - IP_SET_OP_ADD_IP].fn; -+ -+ if (len < sizeof(struct ip_set_req_adt)) { -+ ip_set_printk("short data in adt request (want >=%zu, got %u)", -+ sizeof(struct ip_set_req_adt), len); -+ res = -EINVAL; -+ goto done; -+ } -+ req_adt = (struct ip_set_req_adt *) data; -+ -+ /* -U :all: :all:|:default: uses IP_SET_INVALID_ID */ -+ if (!(*op == IP_SET_OP_UNBIND_SET -+ && req_adt->index == IP_SET_INVALID_ID)) { -+ index = ip_set_find_byindex(req_adt->index); -+ if (index == IP_SET_INVALID_ID) { -+ res = -ENOENT; -+ goto done; -+ } -+ } -+ res = adtfn(index, data, len); -+ -+ done: -+ up(&ip_set_app_mutex); -+ vfree(data); -+ if (res > 0) -+ res = 0; -+ DP("final result %d", res); -+ return res; -+} -+ -+static int -+ip_set_sockfn_get(struct sock *sk, int optval, void *user, int *len) -+{ -+ int res = 0; -+ unsigned *op; -+ ip_set_id_t index = IP_SET_INVALID_ID; -+ void *data; -+ int copylen = *len; -+ -+ DP("optval=%d, user=%p, len=%d", optval, user, *len); -+ if (!capable(CAP_NET_ADMIN)) -+ return -EPERM; -+ if (optval != SO_IP_SET) -+ return -EBADF; -+ if (*len < sizeof(unsigned)) { -+ ip_set_printk("short userdata (want >=%zu, got %d)", -+ sizeof(unsigned), *len); -+ return -EINVAL; -+ } -+ data = vmalloc(*len); -+ if (!data) { -+ DP("out of mem for %d bytes", *len); -+ return -ENOMEM; -+ } -+ if (copy_from_user(data, user, *len) != 0) { -+ res = -EFAULT; -+ goto done; -+ } -+ if (down_interruptible(&ip_set_app_mutex)) { -+ res = -EINTR; -+ goto done; -+ } -+ -+ op = (unsigned *) data; -+ DP("op=%x", *op); -+ -+ if (*op < IP_SET_OP_VERSION) { -+ /* Check the version at the beginning of operations */ -+ struct ip_set_req_version *req_version = -+ (struct ip_set_req_version *) data; -+ if (req_version->version != IP_SET_PROTOCOL_VERSION) { -+ res = -EPROTO; -+ goto done; -+ } -+ } -+ -+ switch (*op) { -+ case IP_SET_OP_VERSION: { -+ struct ip_set_req_version *req_version = -+ (struct ip_set_req_version *) data; -+ -+ if (*len != sizeof(struct ip_set_req_version)) { -+ ip_set_printk("invalid VERSION (want %zu, got %d)", -+ sizeof(struct ip_set_req_version), -+ *len); -+ res = -EINVAL; -+ goto done; -+ } -+ -+ req_version->version = IP_SET_PROTOCOL_VERSION; -+ res = copy_to_user(user, req_version, -+ sizeof(struct ip_set_req_version)); -+ goto done; -+ } -+ case IP_SET_OP_GET_BYNAME: { -+ struct ip_set_req_get_set *req_get -+ = (struct ip_set_req_get_set *) data; -+ -+ if (*len != sizeof(struct ip_set_req_get_set)) { -+ ip_set_printk("invalid GET_BYNAME (want %zu, got %d)", -+ sizeof(struct ip_set_req_get_set), *len); -+ res = -EINVAL; -+ goto done; -+ } -+ req_get->set.name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ index = ip_set_find_byname(req_get->set.name); -+ req_get->set.index = index; -+ goto copy; -+ } -+ case IP_SET_OP_GET_BYINDEX: { -+ struct ip_set_req_get_set *req_get -+ = (struct ip_set_req_get_set *) data; -+ -+ if (*len != sizeof(struct ip_set_req_get_set)) { -+ ip_set_printk("invalid GET_BYINDEX (want %zu, got %d)", -+ sizeof(struct ip_set_req_get_set), *len); -+ res = -EINVAL; -+ goto done; -+ } -+ req_get->set.name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ index = ip_set_find_byindex(req_get->set.index); -+ strncpy(req_get->set.name, -+ index == IP_SET_INVALID_ID ? "" -+ : ip_set_list[index]->name, IP_SET_MAXNAMELEN); -+ goto copy; -+ } -+ case IP_SET_OP_ADT_GET: { -+ struct ip_set_req_adt_get *req_get -+ = (struct ip_set_req_adt_get *) data; -+ -+ if (*len != sizeof(struct ip_set_req_adt_get)) { -+ ip_set_printk("invalid ADT_GET (want %zu, got %d)", -+ sizeof(struct ip_set_req_adt_get), *len); -+ res = -EINVAL; -+ goto done; -+ } -+ req_get->set.name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ index = ip_set_find_byname(req_get->set.name); -+ if (index != IP_SET_INVALID_ID) { -+ req_get->set.index = index; -+ strncpy(req_get->typename, -+ ip_set_list[index]->type->typename, -+ IP_SET_MAXNAMELEN - 1); -+ } else { -+ res = -ENOENT; -+ goto done; -+ } -+ goto copy; -+ } -+ case IP_SET_OP_MAX_SETS: { -+ struct ip_set_req_max_sets *req_max_sets -+ = (struct ip_set_req_max_sets *) data; -+ ip_set_id_t i; -+ -+ if (*len != sizeof(struct ip_set_req_max_sets)) { -+ ip_set_printk("invalid MAX_SETS (want %zu, got %d)", -+ sizeof(struct ip_set_req_max_sets), *len); -+ res = -EINVAL; -+ goto done; -+ } -+ -+ if (strcmp(req_max_sets->set.name, IPSET_TOKEN_ALL) == 0) { -+ req_max_sets->set.index = IP_SET_INVALID_ID; -+ } else { -+ req_max_sets->set.name[IP_SET_MAXNAMELEN - 1] = '\0'; -+ req_max_sets->set.index = -+ ip_set_find_byname(req_max_sets->set.name); -+ if (req_max_sets->set.index == IP_SET_INVALID_ID) { -+ res = -ENOENT; -+ goto done; -+ } -+ } -+ req_max_sets->max_sets = ip_set_max; -+ req_max_sets->sets = 0; -+ for (i = 0; i < ip_set_max; i++) { -+ if (ip_set_list[i] != NULL) -+ req_max_sets->sets++; -+ } -+ goto copy; -+ } -+ case IP_SET_OP_LIST_SIZE: -+ case IP_SET_OP_SAVE_SIZE: { -+ struct ip_set_req_setnames *req_setnames -+ = (struct ip_set_req_setnames *) data; -+ struct ip_set_name_list *name_list; -+ struct ip_set *set; -+ ip_set_id_t i; -+ int used; -+ -+ if (*len < sizeof(struct ip_set_req_setnames)) { -+ ip_set_printk("short LIST_SIZE (want >=%zu, got %d)", -+ sizeof(struct ip_set_req_setnames), *len); -+ res = -EINVAL; -+ goto done; -+ } -+ -+ req_setnames->size = 0; -+ used = sizeof(struct ip_set_req_setnames); -+ for (i = 0; i < ip_set_max; i++) { -+ if (ip_set_list[i] == NULL) -+ continue; -+ name_list = (struct ip_set_name_list *) -+ (data + used); -+ used += sizeof(struct ip_set_name_list); -+ if (used > copylen) { -+ res = -EAGAIN; -+ goto done; -+ } -+ set = ip_set_list[i]; -+ /* Fill in index, name, etc. */ -+ name_list->index = i; -+ name_list->id = set->id; -+ strncpy(name_list->name, -+ set->name, -+ IP_SET_MAXNAMELEN - 1); -+ strncpy(name_list->typename, -+ set->type->typename, -+ IP_SET_MAXNAMELEN - 1); -+ DP("filled %s of type %s, index %u\n", -+ name_list->name, name_list->typename, -+ name_list->index); -+ if (!(req_setnames->index == IP_SET_INVALID_ID -+ || req_setnames->index == i)) -+ continue; -+ /* Update size */ -+ switch (*op) { -+ case IP_SET_OP_LIST_SIZE: { -+ req_setnames->size += sizeof(struct ip_set_list) -+ + set->type->header_size -+ + set->type->list_members_size(set); -+ FOREACH_HASH_DO(__set_hash_bindings_size_list, -+ i, &req_setnames->size); -+ break; -+ } -+ case IP_SET_OP_SAVE_SIZE: { -+ req_setnames->size += sizeof(struct ip_set_save) -+ + set->type->header_size -+ + set->type->list_members_size(set); -+ FOREACH_HASH_DO(__set_hash_bindings_size_save, -+ i, &req_setnames->size); -+ break; -+ } -+ default: -+ break; -+ } -+ } -+ if (copylen != used) { -+ res = -EAGAIN; -+ goto done; -+ } -+ goto copy; -+ } -+ case IP_SET_OP_LIST: { -+ struct ip_set_req_list *req_list -+ = (struct ip_set_req_list *) data; -+ ip_set_id_t i; -+ int used; -+ -+ if (*len < sizeof(struct ip_set_req_list)) { -+ ip_set_printk("short LIST (want >=%zu, got %d)", -+ sizeof(struct ip_set_req_list), *len); -+ res = -EINVAL; -+ goto done; -+ } -+ index = req_list->index; -+ if (index != IP_SET_INVALID_ID -+ && ip_set_find_byindex(index) != index) { -+ res = -ENOENT; -+ goto done; -+ } -+ used = 0; -+ if (index == IP_SET_INVALID_ID) { -+ /* List all sets */ -+ for (i = 0; i < ip_set_max && res == 0; i++) { -+ if (ip_set_list[i] != NULL) -+ res = ip_set_list_set(i, data, &used, *len); -+ } -+ } else { -+ /* List an individual set */ -+ res = ip_set_list_set(index, data, &used, *len); -+ } -+ if (res != 0) -+ goto done; -+ else if (copylen != used) { -+ res = -EAGAIN; -+ goto done; -+ } -+ goto copy; -+ } -+ case IP_SET_OP_SAVE: { -+ struct ip_set_req_list *req_save -+ = (struct ip_set_req_list *) data; -+ ip_set_id_t i; -+ int used; -+ -+ if (*len < sizeof(struct ip_set_req_list)) { -+ ip_set_printk("short SAVE (want >=%zu, got %d)", -+ sizeof(struct ip_set_req_list), *len); -+ res = -EINVAL; -+ goto done; -+ } -+ index = req_save->index; -+ if (index != IP_SET_INVALID_ID -+ && ip_set_find_byindex(index) != index) { -+ res = -ENOENT; -+ goto done; -+ } -+ used = 0; -+ if (index == IP_SET_INVALID_ID) { -+ /* Save all sets */ -+ for (i = 0; i < ip_set_max && res == 0; i++) { -+ if (ip_set_list[i] != NULL) -+ res = ip_set_save_set(i, data, &used, *len); -+ } -+ } else { -+ /* Save an individual set */ -+ res = ip_set_save_set(index, data, &used, *len); -+ } -+ if (res == 0) -+ res = ip_set_save_bindings(index, data, &used, *len); -+ -+ if (res != 0) -+ goto done; -+ else if (copylen != used) { -+ res = -EAGAIN; -+ goto done; -+ } -+ goto copy; -+ } -+ case IP_SET_OP_RESTORE: { -+ struct ip_set_req_setnames *req_restore -+ = (struct ip_set_req_setnames *) data; -+ int line; -+ -+ if (*len < sizeof(struct ip_set_req_setnames) -+ || *len != req_restore->size) { -+ ip_set_printk("invalid RESTORE (want =%zu, got %d)", -+ req_restore->size, *len); -+ res = -EINVAL; -+ goto done; -+ } -+ line = ip_set_restore(data + sizeof(struct ip_set_req_setnames), -+ req_restore->size - sizeof(struct ip_set_req_setnames)); -+ DP("ip_set_restore: %u", line); -+ if (line != 0) { -+ res = -EAGAIN; -+ req_restore->size = line; -+ copylen = sizeof(struct ip_set_req_setnames); -+ goto copy; -+ } -+ goto done; -+ } -+ default: -+ res = -EBADMSG; -+ goto done; -+ } /* end of switch(op) */ -+ -+ copy: -+ DP("set %s, copylen %u", index != IP_SET_INVALID_ID -+ && ip_set_list[index] -+ ? ip_set_list[index]->name -+ : ":all:", copylen); -+ if (res == 0) -+ res = copy_to_user(user, data, copylen); -+ else -+ copy_to_user(user, data, copylen); -+ -+ done: -+ up(&ip_set_app_mutex); -+ vfree(data); -+ if (res > 0) -+ res = 0; -+ DP("final result %d", res); -+ return res; -+} -+ -+static struct nf_sockopt_ops so_set = { -+ .pf = PF_INET, -+ .set_optmin = SO_IP_SET, -+ .set_optmax = SO_IP_SET + 1, -+ .set = &ip_set_sockfn_set, -+ .get_optmin = SO_IP_SET, -+ .get_optmax = SO_IP_SET + 1, -+ .get = &ip_set_sockfn_get, -+ .use = 0 -+}; -+ -+static int max_sets, hash_size; -+module_param(max_sets, int, 0600); -+MODULE_PARM_DESC(max_sets, "maximal number of sets"); -+module_param(hash_size, int, 0600); -+MODULE_PARM_DESC(hash_size, "hash size for bindings"); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jozsef Kadlecsik "); -+MODULE_DESCRIPTION("module implementing core IP set support"); -+ -+static int __init init(void) -+{ -+ int res; -+ ip_set_id_t i; -+ -+ get_random_bytes(&ip_set_hash_random, 4); -+ if (max_sets) -+ ip_set_max = max_sets; -+ ip_set_list = vmalloc(sizeof(struct ip_set *) * ip_set_max); -+ if (!ip_set_list) { -+ printk(KERN_ERR "Unable to create ip_set_list\n"); -+ return -ENOMEM; -+ } -+ memset(ip_set_list, 0, sizeof(struct ip_set *) * ip_set_max); -+ if (hash_size) -+ ip_set_bindings_hash_size = hash_size; -+ ip_set_hash = vmalloc(sizeof(struct list_head) * ip_set_bindings_hash_size); -+ if (!ip_set_hash) { -+ printk(KERN_ERR "Unable to create ip_set_hash\n"); -+ vfree(ip_set_list); -+ return -ENOMEM; -+ } -+ for (i = 0; i < ip_set_bindings_hash_size; i++) -+ INIT_LIST_HEAD(&ip_set_hash[i]); -+ -+ INIT_LIST_HEAD(&set_type_list); -+ -+ res = nf_register_sockopt(&so_set); -+ if (res != 0) { -+ ip_set_printk("SO_SET registry failed: %d", res); -+ vfree(ip_set_list); -+ vfree(ip_set_hash); -+ return res; -+ } -+ return 0; -+} -+ -+static void __exit fini(void) -+{ -+ /* There can't be any existing set or binding */ -+ nf_unregister_sockopt(&so_set); -+ vfree(ip_set_list); -+ vfree(ip_set_hash); -+ DP("these are the famous last words"); -+} -+ -+EXPORT_SYMBOL(ip_set_register_set_type); -+EXPORT_SYMBOL(ip_set_unregister_set_type); -+ -+EXPORT_SYMBOL(ip_set_get_byname); -+EXPORT_SYMBOL(ip_set_get_byindex); -+EXPORT_SYMBOL(ip_set_put); -+ -+EXPORT_SYMBOL(ip_set_addip_kernel); -+EXPORT_SYMBOL(ip_set_delip_kernel); -+EXPORT_SYMBOL(ip_set_testip_kernel); -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ip_set_iphash.c linux-2.6.19.dev/net/ipv4/netfilter/ip_set_iphash.c ---- linux-2.6.19.old/net/ipv4/netfilter/ip_set_iphash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ip_set_iphash.c 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,379 @@ -+/* Copyright (C) 2003-2004 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* Kernel module implementing an ip hash set */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+static inline __u32 -+jhash_ip(const struct ip_set_iphash *map, ip_set_ip_t ip) -+{ -+ return jhash_1word(ip, map->initval); -+} -+ -+static inline __u32 -+randhash_ip(const struct ip_set_iphash *map, ip_set_ip_t ip) -+{ -+ return (1 + ip % map->prime); -+} -+ -+static inline __u32 -+hash_id(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_iphash *map = (struct ip_set_iphash *) set->data; -+ __u32 jhash, randhash, id; -+ u_int16_t i; -+ -+ *hash_ip = ip & map->netmask; -+ jhash = jhash_ip(map, *hash_ip); -+ randhash = randhash_ip(map, *hash_ip); -+ DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u, %u.%u.%u.%u", -+ set->name, HIPQUAD(ip), HIPQUAD(*hash_ip), HIPQUAD(map->netmask)); -+ -+ for (i = 0; i < map->probes; i++) { -+ id = (jhash + i * randhash) % map->hashsize; -+ DP("hash key: %u", id); -+ if (map->members[id] == *hash_ip) -+ return id; -+ /* No shortcut at testing - there can be deleted -+ * entries. */ -+ } -+ return UINT_MAX; -+} -+ -+static inline int -+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ return (hash_id(set, ip, hash_ip) != UINT_MAX); -+} -+ -+static int -+testip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_iphash *req = -+ (struct ip_set_req_iphash *) data; -+ -+ if (size != sizeof(struct ip_set_req_iphash)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_iphash), -+ size); -+ return -EINVAL; -+ } -+ return __testip(set, req->ip, hash_ip); -+} -+ -+static int -+testip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ return __testip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+} -+ -+static inline int -+__addip(struct ip_set_iphash *map, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ __u32 jhash, randhash, probe; -+ u_int16_t i; -+ -+ *hash_ip = ip & map->netmask; -+ jhash = jhash_ip(map, *hash_ip); -+ randhash = randhash_ip(map, *hash_ip); -+ -+ for (i = 0; i < map->probes; i++) { -+ probe = (jhash + i * randhash) % map->hashsize; -+ if (map->members[probe] == *hash_ip) -+ return -EEXIST; -+ if (!map->members[probe]) { -+ map->members[probe] = *hash_ip; -+ return 0; -+ } -+ } -+ /* Trigger rehashing */ -+ return -EAGAIN; -+} -+ -+static int -+addip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_iphash *req = -+ (struct ip_set_req_iphash *) data; -+ -+ if (size != sizeof(struct ip_set_req_iphash)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_iphash), -+ size); -+ return -EINVAL; -+ } -+ return __addip((struct ip_set_iphash *) set->data, req->ip, hash_ip); -+} -+ -+static int -+addip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ return __addip((struct ip_set_iphash *) set->data, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+} -+ -+static int retry(struct ip_set *set) -+{ -+ struct ip_set_iphash *map = (struct ip_set_iphash *) set->data; -+ ip_set_ip_t hash_ip, *members; -+ u_int32_t i, hashsize; -+ unsigned newbytes; -+ int res; -+ struct ip_set_iphash tmp = { -+ .hashsize = map->hashsize, -+ .probes = map->probes, -+ .resize = map->resize, -+ .netmask = map->netmask, -+ }; -+ -+ if (map->resize == 0) -+ return -ERANGE; -+ -+ again: -+ res = 0; -+ -+ /* Calculate new parameters */ -+ get_random_bytes(&tmp.initval, 4); -+ hashsize = tmp.hashsize + (tmp.hashsize * map->resize)/100; -+ if (hashsize == tmp.hashsize) -+ hashsize++; -+ tmp.prime = make_prime(hashsize); -+ -+ ip_set_printk("rehashing of set %s triggered: " -+ "hashsize grows from %u to %u", -+ set->name, tmp.hashsize, hashsize); -+ tmp.hashsize = hashsize; -+ -+ newbytes = hashsize * sizeof(ip_set_ip_t); -+ tmp.members = ip_set_malloc_atomic(newbytes); -+ if (!tmp.members) { -+ DP("out of memory for %d bytes", newbytes); -+ return -ENOMEM; -+ } -+ memset(tmp.members, 0, newbytes); -+ -+ write_lock_bh(&set->lock); -+ map = (struct ip_set_iphash *) set->data; /* Play safe */ -+ for (i = 0; i < map->hashsize && res == 0; i++) { -+ if (map->members[i]) -+ res = __addip(&tmp, map->members[i], &hash_ip); -+ } -+ if (res) { -+ /* Failure, try again */ -+ write_unlock_bh(&set->lock); -+ ip_set_free(tmp.members, newbytes); -+ goto again; -+ } -+ -+ /* Success at resizing! */ -+ members = map->members; -+ hashsize = map->hashsize; -+ -+ map->initval = tmp.initval; -+ map->prime = tmp.prime; -+ map->hashsize = tmp.hashsize; -+ map->members = tmp.members; -+ write_unlock_bh(&set->lock); -+ -+ ip_set_free(members, hashsize * sizeof(ip_set_ip_t)); -+ -+ return 0; -+} -+ -+static inline int -+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_iphash *map = (struct ip_set_iphash *) set->data; -+ ip_set_ip_t id = hash_id(set, ip, hash_ip); -+ -+ if (id == UINT_MAX) -+ return -EEXIST; -+ -+ map->members[id] = 0; -+ return 0; -+} -+ -+static int -+delip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_iphash *req = -+ (struct ip_set_req_iphash *) data; -+ -+ if (size != sizeof(struct ip_set_req_iphash)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_iphash), -+ size); -+ return -EINVAL; -+ } -+ return __delip(set, req->ip, hash_ip); -+} -+ -+static int -+delip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ return __delip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+} -+ -+static int create(struct ip_set *set, const void *data, size_t size) -+{ -+ unsigned newbytes; -+ struct ip_set_req_iphash_create *req = -+ (struct ip_set_req_iphash_create *) data; -+ struct ip_set_iphash *map; -+ -+ if (size != sizeof(struct ip_set_req_iphash_create)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_iphash_create), -+ size); -+ return -EINVAL; -+ } -+ -+ if (req->hashsize < 1) { -+ ip_set_printk("hashsize too small"); -+ return -ENOEXEC; -+ } -+ -+ map = kmalloc(sizeof(struct ip_set_iphash), GFP_KERNEL); -+ if (!map) { -+ DP("out of memory for %d bytes", -+ sizeof(struct ip_set_iphash)); -+ return -ENOMEM; -+ } -+ get_random_bytes(&map->initval, 4); -+ map->prime = make_prime(req->hashsize); -+ map->hashsize = req->hashsize; -+ map->probes = req->probes; -+ map->resize = req->resize; -+ map->netmask = req->netmask; -+ newbytes = map->hashsize * sizeof(ip_set_ip_t); -+ map->members = ip_set_malloc(newbytes); -+ if (!map->members) { -+ DP("out of memory for %d bytes", newbytes); -+ kfree(map); -+ return -ENOMEM; -+ } -+ memset(map->members, 0, newbytes); -+ -+ set->data = map; -+ return 0; -+} -+ -+static void destroy(struct ip_set *set) -+{ -+ struct ip_set_iphash *map = (struct ip_set_iphash *) set->data; -+ -+ ip_set_free(map->members, map->hashsize * sizeof(ip_set_ip_t)); -+ kfree(map); -+ -+ set->data = NULL; -+} -+ -+static void flush(struct ip_set *set) -+{ -+ struct ip_set_iphash *map = (struct ip_set_iphash *) set->data; -+ memset(map->members, 0, map->hashsize * sizeof(ip_set_ip_t)); -+} -+ -+static void list_header(const struct ip_set *set, void *data) -+{ -+ struct ip_set_iphash *map = (struct ip_set_iphash *) set->data; -+ struct ip_set_req_iphash_create *header = -+ (struct ip_set_req_iphash_create *) data; -+ -+ header->hashsize = map->hashsize; -+ header->probes = map->probes; -+ header->resize = map->resize; -+ header->netmask = map->netmask; -+} -+ -+static int list_members_size(const struct ip_set *set) -+{ -+ struct ip_set_iphash *map = (struct ip_set_iphash *) set->data; -+ -+ return (map->hashsize * sizeof(ip_set_ip_t)); -+} -+ -+static void list_members(const struct ip_set *set, void *data) -+{ -+ struct ip_set_iphash *map = (struct ip_set_iphash *) set->data; -+ int bytes = map->hashsize * sizeof(ip_set_ip_t); -+ -+ memcpy(data, map->members, bytes); -+} -+ -+static struct ip_set_type ip_set_iphash = { -+ .typename = SETTYPE_NAME, -+ .typecode = IPSET_TYPE_IP, -+ .protocol_version = IP_SET_PROTOCOL_VERSION, -+ .create = &create, -+ .destroy = &destroy, -+ .flush = &flush, -+ .reqsize = sizeof(struct ip_set_req_iphash), -+ .addip = &addip, -+ .addip_kernel = &addip_kernel, -+ .retry = &retry, -+ .delip = &delip, -+ .delip_kernel = &delip_kernel, -+ .testip = &testip, -+ .testip_kernel = &testip_kernel, -+ .header_size = sizeof(struct ip_set_req_iphash_create), -+ .list_header = &list_header, -+ .list_members_size = &list_members_size, -+ .list_members = &list_members, -+ .me = THIS_MODULE, -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jozsef Kadlecsik "); -+MODULE_DESCRIPTION("iphash type of IP sets"); -+ -+static int __init init(void) -+{ -+ init_max_malloc_size(); -+ return ip_set_register_set_type(&ip_set_iphash); -+} -+ -+static void __exit fini(void) -+{ -+ /* FIXME: possible race with ip_set_create() */ -+ ip_set_unregister_set_type(&ip_set_iphash); -+} -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ip_set_ipmap.c linux-2.6.19.dev/net/ipv4/netfilter/ip_set_ipmap.c ---- linux-2.6.19.old/net/ipv4/netfilter/ip_set_ipmap.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ip_set_ipmap.c 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,313 @@ -+/* Copyright (C) 2000-2002 Joakim Axelsson -+ * Patrick Schaaf -+ * Copyright (C) 2003-2004 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* Kernel module implementing an IP set type: the single bitmap type */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+static inline ip_set_ip_t -+ip_to_id(const struct ip_set_ipmap *map, ip_set_ip_t ip) -+{ -+ return (ip - map->first_ip)/map->hosts; -+} -+ -+static inline int -+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data; -+ -+ if (ip < map->first_ip || ip > map->last_ip) -+ return -ERANGE; -+ -+ *hash_ip = ip & map->netmask; -+ DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u", -+ set->name, HIPQUAD(ip), HIPQUAD(*hash_ip)); -+ return !!test_bit(ip_to_id(map, *hash_ip), map->members); -+} -+ -+static int -+testip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_ipmap *req = -+ (struct ip_set_req_ipmap *) data; -+ -+ if (size != sizeof(struct ip_set_req_ipmap)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_ipmap), -+ size); -+ return -EINVAL; -+ } -+ return __testip(set, req->ip, hash_ip); -+} -+ -+static int -+testip_kernel(struct ip_set *set, -+ const struct sk_buff *skb, -+ u_int32_t flags, -+ ip_set_ip_t *hash_ip) -+{ -+ int res; -+ -+ DP("flag: %s src: %u.%u.%u.%u dst: %u.%u.%u.%u", -+ flags & IPSET_SRC ? "SRC" : "DST", -+ NIPQUAD(skb->nh.iph->saddr), -+ NIPQUAD(skb->nh.iph->daddr)); -+ -+ res = __testip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+ return (res < 0 ? 0 : res); -+} -+ -+static inline int -+__addip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data; -+ -+ if (ip < map->first_ip || ip > map->last_ip) -+ return -ERANGE; -+ -+ *hash_ip = ip & map->netmask; -+ DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip)); -+ if (test_and_set_bit(ip_to_id(map, *hash_ip), map->members)) -+ return -EEXIST; -+ -+ return 0; -+} -+ -+static int -+addip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_ipmap *req = -+ (struct ip_set_req_ipmap *) data; -+ -+ if (size != sizeof(struct ip_set_req_ipmap)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_ipmap), -+ size); -+ return -EINVAL; -+ } -+ DP("%u.%u.%u.%u", HIPQUAD(req->ip)); -+ return __addip(set, req->ip, hash_ip); -+} -+ -+static int -+addip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ return __addip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+} -+ -+static inline int -+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data; -+ -+ if (ip < map->first_ip || ip > map->last_ip) -+ return -ERANGE; -+ -+ *hash_ip = ip & map->netmask; -+ DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip)); -+ if (!test_and_clear_bit(ip_to_id(map, *hash_ip), map->members)) -+ return -EEXIST; -+ -+ return 0; -+} -+ -+static int -+delip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_ipmap *req = -+ (struct ip_set_req_ipmap *) data; -+ -+ if (size != sizeof(struct ip_set_req_ipmap)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_ipmap), -+ size); -+ return -EINVAL; -+ } -+ return __delip(set, req->ip, hash_ip); -+} -+ -+static int -+delip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ return __delip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+} -+ -+static int create(struct ip_set *set, const void *data, size_t size) -+{ -+ int newbytes; -+ struct ip_set_req_ipmap_create *req = -+ (struct ip_set_req_ipmap_create *) data; -+ struct ip_set_ipmap *map; -+ -+ if (size != sizeof(struct ip_set_req_ipmap_create)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_ipmap_create), -+ size); -+ return -EINVAL; -+ } -+ -+ DP("from %u.%u.%u.%u to %u.%u.%u.%u", -+ HIPQUAD(req->from), HIPQUAD(req->to)); -+ -+ if (req->from > req->to) { -+ DP("bad ip range"); -+ return -ENOEXEC; -+ } -+ -+ if (req->to - req->from > MAX_RANGE) { -+ ip_set_printk("range too big (max %d addresses)", -+ MAX_RANGE); -+ return -ENOEXEC; -+ } -+ -+ map = kmalloc(sizeof(struct ip_set_ipmap), GFP_KERNEL); -+ if (!map) { -+ DP("out of memory for %d bytes", -+ sizeof(struct ip_set_ipmap)); -+ return -ENOMEM; -+ } -+ map->first_ip = req->from; -+ map->last_ip = req->to; -+ map->netmask = req->netmask; -+ -+ if (req->netmask == 0xFFFFFFFF) { -+ map->hosts = 1; -+ map->sizeid = map->last_ip - map->first_ip + 1; -+ } else { -+ unsigned int mask_bits, netmask_bits; -+ ip_set_ip_t mask; -+ -+ map->first_ip &= map->netmask; /* Should we better bark? */ -+ -+ mask = range_to_mask(map->first_ip, map->last_ip, &mask_bits); -+ netmask_bits = mask_to_bits(map->netmask); -+ -+ if (!mask || netmask_bits <= mask_bits) -+ return -ENOEXEC; -+ -+ map->hosts = 2 << (32 - netmask_bits - 1); -+ map->sizeid = 2 << (netmask_bits - mask_bits - 1); -+ } -+ newbytes = bitmap_bytes(0, map->sizeid - 1); -+ map->members = kmalloc(newbytes, GFP_KERNEL); -+ if (!map->members) { -+ DP("out of memory for %d bytes", newbytes); -+ kfree(map); -+ return -ENOMEM; -+ } -+ memset(map->members, 0, newbytes); -+ -+ set->data = map; -+ return 0; -+} -+ -+static void destroy(struct ip_set *set) -+{ -+ struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data; -+ -+ kfree(map->members); -+ kfree(map); -+ -+ set->data = NULL; -+} -+ -+static void flush(struct ip_set *set) -+{ -+ struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data; -+ memset(map->members, 0, bitmap_bytes(0, map->sizeid - 1)); -+} -+ -+static void list_header(const struct ip_set *set, void *data) -+{ -+ struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data; -+ struct ip_set_req_ipmap_create *header = -+ (struct ip_set_req_ipmap_create *) data; -+ -+ header->from = map->first_ip; -+ header->to = map->last_ip; -+ header->netmask = map->netmask; -+} -+ -+static int list_members_size(const struct ip_set *set) -+{ -+ struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data; -+ -+ return bitmap_bytes(0, map->sizeid - 1); -+} -+ -+static void list_members(const struct ip_set *set, void *data) -+{ -+ struct ip_set_ipmap *map = (struct ip_set_ipmap *) set->data; -+ int bytes = bitmap_bytes(0, map->sizeid - 1); -+ -+ memcpy(data, map->members, bytes); -+} -+ -+static struct ip_set_type ip_set_ipmap = { -+ .typename = SETTYPE_NAME, -+ .typecode = IPSET_TYPE_IP, -+ .protocol_version = IP_SET_PROTOCOL_VERSION, -+ .create = &create, -+ .destroy = &destroy, -+ .flush = &flush, -+ .reqsize = sizeof(struct ip_set_req_ipmap), -+ .addip = &addip, -+ .addip_kernel = &addip_kernel, -+ .delip = &delip, -+ .delip_kernel = &delip_kernel, -+ .testip = &testip, -+ .testip_kernel = &testip_kernel, -+ .header_size = sizeof(struct ip_set_req_ipmap_create), -+ .list_header = &list_header, -+ .list_members_size = &list_members_size, -+ .list_members = &list_members, -+ .me = THIS_MODULE, -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jozsef Kadlecsik "); -+MODULE_DESCRIPTION("ipmap type of IP sets"); -+ -+static int __init init(void) -+{ -+ return ip_set_register_set_type(&ip_set_ipmap); -+} -+ -+static void __exit fini(void) -+{ -+ /* FIXME: possible race with ip_set_create() */ -+ ip_set_unregister_set_type(&ip_set_ipmap); -+} -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ip_set_iptree.c linux-2.6.19.dev/net/ipv4/netfilter/ip_set_iptree.c ---- linux-2.6.19.old/net/ipv4/netfilter/ip_set_iptree.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ip_set_iptree.c 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,510 @@ -+/* Copyright (C) 2005 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* Kernel module implementing an IP set type: the iptree type */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* Garbage collection interval in seconds: */ -+#define IPTREE_GC_TIME 5*60 -+/* Sleep so many milliseconds before trying again -+ * to delete the gc timer at destroying a set */ -+#define IPTREE_DESTROY_SLEEP 100 -+ -+static kmem_cache_t *branch_cachep; -+static kmem_cache_t *leaf_cachep; -+ -+#define ABCD(a,b,c,d,addrp) do { \ -+ a = ((unsigned char *)addrp)[3]; \ -+ b = ((unsigned char *)addrp)[2]; \ -+ c = ((unsigned char *)addrp)[1]; \ -+ d = ((unsigned char *)addrp)[0]; \ -+} while (0) -+ -+#define TESTIP_WALK(map, elem, branch) do { \ -+ if ((map)->tree[elem]) { \ -+ branch = (map)->tree[elem]; \ -+ } else \ -+ return 0; \ -+} while (0) -+ -+static inline int -+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ struct ip_set_iptreeb *btree; -+ struct ip_set_iptreec *ctree; -+ struct ip_set_iptreed *dtree; -+ unsigned char a,b,c,d; -+ -+ *hash_ip = ip; -+ ABCD(a, b, c, d, hash_ip); -+ DP("%u %u %u %u timeout %u", a, b, c, d, map->timeout); -+ TESTIP_WALK(map, a, btree); -+ TESTIP_WALK(btree, b, ctree); -+ TESTIP_WALK(ctree, c, dtree); -+ DP("%lu %lu", dtree->expires[d], jiffies); -+ return !!(map->timeout ? (time_after(dtree->expires[d], jiffies)) -+ : dtree->expires[d]); -+} -+ -+static int -+testip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_iptree *req = -+ (struct ip_set_req_iptree *) data; -+ -+ if (size != sizeof(struct ip_set_req_iptree)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_iptree), -+ size); -+ return -EINVAL; -+ } -+ return __testip(set, req->ip, hash_ip); -+} -+ -+static int -+testip_kernel(struct ip_set *set, -+ const struct sk_buff *skb, -+ u_int32_t flags, -+ ip_set_ip_t *hash_ip) -+{ -+ int res; -+ -+ DP("flag: %s src: %u.%u.%u.%u dst: %u.%u.%u.%u", -+ flags & IPSET_SRC ? "SRC" : "DST", -+ NIPQUAD(skb->nh.iph->saddr), -+ NIPQUAD(skb->nh.iph->daddr)); -+ -+ res = __testip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+ return (res < 0 ? 0 : res); -+} -+ -+#define ADDIP_WALK(map, elem, branch, type, cachep) do { \ -+ if ((map)->tree[elem]) { \ -+ DP("found %u", elem); \ -+ branch = (map)->tree[elem]; \ -+ } else { \ -+ branch = (type *) \ -+ kmem_cache_alloc(cachep, GFP_KERNEL); \ -+ if (branch == NULL) \ -+ return -ENOMEM; \ -+ memset(branch, 0, sizeof(*branch)); \ -+ (map)->tree[elem] = branch; \ -+ DP("alloc %u", elem); \ -+ } \ -+} while (0) -+ -+static inline int -+__addip(struct ip_set *set, ip_set_ip_t ip, unsigned int timeout, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ struct ip_set_iptreeb *btree; -+ struct ip_set_iptreec *ctree; -+ struct ip_set_iptreed *dtree; -+ unsigned char a,b,c,d; -+ int ret = 0; -+ -+ *hash_ip = ip; -+ ABCD(a, b, c, d, hash_ip); -+ DP("%u %u %u %u timeout %u", a, b, c, d, timeout); -+ ADDIP_WALK(map, a, btree, struct ip_set_iptreeb, branch_cachep); -+ ADDIP_WALK(btree, b, ctree, struct ip_set_iptreec, branch_cachep); -+ ADDIP_WALK(ctree, c, dtree, struct ip_set_iptreed, leaf_cachep); -+ if (dtree->expires[d] -+ && (!map->timeout || time_after(dtree->expires[d], jiffies))) -+ ret = -EEXIST; -+ dtree->expires[d] = map->timeout ? (timeout * HZ + jiffies) : 1; -+ DP("%u %lu", d, dtree->expires[d]); -+ return ret; -+} -+ -+static int -+addip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ struct ip_set_req_iptree *req = -+ (struct ip_set_req_iptree *) data; -+ -+ if (size != sizeof(struct ip_set_req_iptree)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_iptree), -+ size); -+ return -EINVAL; -+ } -+ DP("%u.%u.%u.%u %u", HIPQUAD(req->ip), req->timeout); -+ return __addip(set, req->ip, -+ req->timeout ? req->timeout : map->timeout, -+ hash_ip); -+} -+ -+static int -+addip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ -+ return __addip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ map->timeout, -+ hash_ip); -+} -+ -+#define DELIP_WALK(map, elem, branch) do { \ -+ if ((map)->tree[elem]) { \ -+ branch = (map)->tree[elem]; \ -+ } else \ -+ return -EEXIST; \ -+} while (0) -+ -+static inline int -+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ struct ip_set_iptreeb *btree; -+ struct ip_set_iptreec *ctree; -+ struct ip_set_iptreed *dtree; -+ unsigned char a,b,c,d; -+ -+ *hash_ip = ip; -+ ABCD(a, b, c, d, hash_ip); -+ DELIP_WALK(map, a, btree); -+ DELIP_WALK(btree, b, ctree); -+ DELIP_WALK(ctree, c, dtree); -+ -+ if (dtree->expires[d]) { -+ dtree->expires[d] = 0; -+ return 0; -+ } -+ return -EEXIST; -+} -+ -+static int -+delip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_iptree *req = -+ (struct ip_set_req_iptree *) data; -+ -+ if (size != sizeof(struct ip_set_req_iptree)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_iptree), -+ size); -+ return -EINVAL; -+ } -+ return __delip(set, req->ip, hash_ip); -+} -+ -+static int -+delip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ return __delip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+} -+ -+#define LOOP_WALK_BEGIN(map, i, branch) \ -+ for (i = 0; i < 255; i++) { \ -+ if (!(map)->tree[i]) \ -+ continue; \ -+ branch = (map)->tree[i] -+ -+#define LOOP_WALK_END } -+ -+static void ip_tree_gc(unsigned long ul_set) -+{ -+ struct ip_set *set = (void *) ul_set; -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ struct ip_set_iptreeb *btree; -+ struct ip_set_iptreec *ctree; -+ struct ip_set_iptreed *dtree; -+ unsigned char a,b,c,d; -+ unsigned char i,j,k; -+ -+ i = j = k = 0; -+ DP("gc: %s", set->name); -+ write_lock_bh(&set->lock); -+ LOOP_WALK_BEGIN(map, a, btree); -+ LOOP_WALK_BEGIN(btree, b, ctree); -+ LOOP_WALK_BEGIN(ctree, c, dtree); -+ for (d = 0; d < 255; d++) { -+ if (dtree->expires[d]) { -+ DP("gc: %u %u %u %u: expires %lu jiffies %lu", -+ a, b, c, d, -+ dtree->expires[d], jiffies); -+ if (map->timeout -+ && time_before(dtree->expires[d], jiffies)) -+ dtree->expires[d] = 0; -+ else -+ k = 1; -+ } -+ } -+ if (k == 0) { -+ DP("gc: %s: leaf %u %u %u empty", -+ set->name, a, b, c); -+ kmem_cache_free(leaf_cachep, dtree); -+ ctree->tree[c] = NULL; -+ } else { -+ DP("gc: %s: leaf %u %u %u not empty", -+ set->name, a, b, c); -+ j = 1; -+ k = 0; -+ } -+ LOOP_WALK_END; -+ if (j == 0) { -+ DP("gc: %s: branch %u %u empty", -+ set->name, a, b); -+ kmem_cache_free(branch_cachep, ctree); -+ btree->tree[b] = NULL; -+ } else { -+ DP("gc: %s: branch %u %u not empty", -+ set->name, a, b); -+ i = 1; -+ j = k = 0; -+ } -+ LOOP_WALK_END; -+ if (i == 0) { -+ DP("gc: %s: branch %u empty", -+ set->name, a); -+ kmem_cache_free(branch_cachep, btree); -+ map->tree[a] = NULL; -+ } else { -+ DP("gc: %s: branch %u not empty", -+ set->name, a); -+ i = j = k = 0; -+ } -+ LOOP_WALK_END; -+ write_unlock_bh(&set->lock); -+ -+ map->gc.expires = jiffies + map->gc_interval * HZ; -+ add_timer(&map->gc); -+} -+ -+static int create(struct ip_set *set, const void *data, size_t size) -+{ -+ struct ip_set_req_iptree_create *req = -+ (struct ip_set_req_iptree_create *) data; -+ struct ip_set_iptree *map; -+ -+ if (size != sizeof(struct ip_set_req_iptree_create)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_iptree_create), -+ size); -+ return -EINVAL; -+ } -+ -+ map = kmalloc(sizeof(struct ip_set_iptree), GFP_KERNEL); -+ if (!map) { -+ DP("out of memory for %d bytes", -+ sizeof(struct ip_set_iptree)); -+ return -ENOMEM; -+ } -+ memset(map, 0, sizeof(*map)); -+ map->timeout = req->timeout; -+ set->data = map; -+ -+ /* If there is no timeout for the entries, -+ * we still have to call gc because delete -+ * do not clean up empty branches */ -+ map->gc_interval = IPTREE_GC_TIME; -+ init_timer(&map->gc); -+ map->gc.data = (unsigned long) set; -+ map->gc.function = ip_tree_gc; -+ map->gc.expires = jiffies + map->gc_interval * HZ; -+ add_timer(&map->gc); -+ -+ return 0; -+} -+ -+static void __flush(struct ip_set_iptree *map) -+{ -+ struct ip_set_iptreeb *btree; -+ struct ip_set_iptreec *ctree; -+ struct ip_set_iptreed *dtree; -+ unsigned int a,b,c; -+ -+ LOOP_WALK_BEGIN(map, a, btree); -+ LOOP_WALK_BEGIN(btree, b, ctree); -+ LOOP_WALK_BEGIN(ctree, c, dtree); -+ kmem_cache_free(leaf_cachep, dtree); -+ LOOP_WALK_END; -+ kmem_cache_free(branch_cachep, ctree); -+ LOOP_WALK_END; -+ kmem_cache_free(branch_cachep, btree); -+ LOOP_WALK_END; -+} -+ -+static void destroy(struct ip_set *set) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ -+ while (!del_timer(&map->gc)) -+ msleep(IPTREE_DESTROY_SLEEP); -+ __flush(map); -+ kfree(map); -+ set->data = NULL; -+} -+ -+static void flush(struct ip_set *set) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ unsigned int timeout = map->timeout; -+ -+ __flush(map); -+ memset(map, 0, sizeof(*map)); -+ map->timeout = timeout; -+} -+ -+static void list_header(const struct ip_set *set, void *data) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ struct ip_set_req_iptree_create *header = -+ (struct ip_set_req_iptree_create *) data; -+ -+ header->timeout = map->timeout; -+} -+ -+static int list_members_size(const struct ip_set *set) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ struct ip_set_iptreeb *btree; -+ struct ip_set_iptreec *ctree; -+ struct ip_set_iptreed *dtree; -+ unsigned char a,b,c,d; -+ unsigned int count = 0; -+ -+ LOOP_WALK_BEGIN(map, a, btree); -+ LOOP_WALK_BEGIN(btree, b, ctree); -+ LOOP_WALK_BEGIN(ctree, c, dtree); -+ for (d = 0; d < 255; d++) { -+ if (dtree->expires[d] -+ && (!map->timeout || time_after(dtree->expires[d], jiffies))) -+ count++; -+ } -+ LOOP_WALK_END; -+ LOOP_WALK_END; -+ LOOP_WALK_END; -+ -+ DP("members %u", count); -+ return (count * sizeof(struct ip_set_req_iptree)); -+} -+ -+static void list_members(const struct ip_set *set, void *data) -+{ -+ struct ip_set_iptree *map = (struct ip_set_iptree *) set->data; -+ struct ip_set_iptreeb *btree; -+ struct ip_set_iptreec *ctree; -+ struct ip_set_iptreed *dtree; -+ unsigned char a,b,c,d; -+ size_t offset = 0; -+ struct ip_set_req_iptree *entry; -+ -+ LOOP_WALK_BEGIN(map, a, btree); -+ LOOP_WALK_BEGIN(btree, b, ctree); -+ LOOP_WALK_BEGIN(ctree, c, dtree); -+ for (d = 0; d < 255; d++) { -+ if (dtree->expires[d] -+ && (!map->timeout || time_after(dtree->expires[d], jiffies))) { -+ entry = (struct ip_set_req_iptree *)(data + offset); -+ entry->ip = ((a << 24) | (b << 16) | (c << 8) | d); -+ entry->timeout = !map->timeout ? 0 -+ : (dtree->expires[d] - jiffies)/HZ; -+ offset += sizeof(struct ip_set_req_iptree); -+ } -+ } -+ LOOP_WALK_END; -+ LOOP_WALK_END; -+ LOOP_WALK_END; -+} -+ -+static struct ip_set_type ip_set_iptree = { -+ .typename = SETTYPE_NAME, -+ .typecode = IPSET_TYPE_IP, -+ .protocol_version = IP_SET_PROTOCOL_VERSION, -+ .create = &create, -+ .destroy = &destroy, -+ .flush = &flush, -+ .reqsize = sizeof(struct ip_set_req_iptree), -+ .addip = &addip, -+ .addip_kernel = &addip_kernel, -+ .delip = &delip, -+ .delip_kernel = &delip_kernel, -+ .testip = &testip, -+ .testip_kernel = &testip_kernel, -+ .header_size = sizeof(struct ip_set_req_iptree_create), -+ .list_header = &list_header, -+ .list_members_size = &list_members_size, -+ .list_members = &list_members, -+ .me = THIS_MODULE, -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jozsef Kadlecsik "); -+MODULE_DESCRIPTION("iptree type of IP sets"); -+ -+static int __init init(void) -+{ -+ int ret; -+ -+ branch_cachep = kmem_cache_create("ip_set_iptreeb", -+ sizeof(struct ip_set_iptreeb), -+ 0, 0, NULL, NULL); -+ if (!branch_cachep) { -+ printk(KERN_ERR "Unable to create ip_set_iptreeb slab cache\n"); -+ ret = -ENOMEM; -+ goto out; -+ } -+ leaf_cachep = kmem_cache_create("ip_set_iptreed", -+ sizeof(struct ip_set_iptreed), -+ 0, 0, NULL, NULL); -+ if (!leaf_cachep) { -+ printk(KERN_ERR "Unable to create ip_set_iptreed slab cache\n"); -+ ret = -ENOMEM; -+ goto free_branch; -+ } -+ ret = ip_set_register_set_type(&ip_set_iptree); -+ if (ret == 0) -+ goto out; -+ -+ kmem_cache_destroy(leaf_cachep); -+ free_branch: -+ kmem_cache_destroy(branch_cachep); -+ out: -+ return ret; -+} -+ -+static void __exit fini(void) -+{ -+ /* FIXME: possible race with ip_set_create() */ -+ ip_set_unregister_set_type(&ip_set_iptree); -+ kmem_cache_destroy(leaf_cachep); -+ kmem_cache_destroy(branch_cachep); -+} -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ip_set_macipmap.c linux-2.6.19.dev/net/ipv4/netfilter/ip_set_macipmap.c ---- linux-2.6.19.old/net/ipv4/netfilter/ip_set_macipmap.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ip_set_macipmap.c 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,338 @@ -+/* Copyright (C) 2000-2002 Joakim Axelsson -+ * Patrick Schaaf -+ * Martin Josefsson -+ * Copyright (C) 2003-2004 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* Kernel module implementing an IP set type: the macipmap type */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+static int -+testip(struct ip_set *set, const void *data, size_t size, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_macipmap *map = (struct ip_set_macipmap *) set->data; -+ struct ip_set_macip *table = (struct ip_set_macip *) map->members; -+ struct ip_set_req_macipmap *req = (struct ip_set_req_macipmap *) data; -+ -+ if (size != sizeof(struct ip_set_req_macipmap)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_macipmap), -+ size); -+ return -EINVAL; -+ } -+ -+ if (req->ip < map->first_ip || req->ip > map->last_ip) -+ return -ERANGE; -+ -+ *hash_ip = req->ip; -+ DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u", -+ set->name, HIPQUAD(req->ip), HIPQUAD(*hash_ip)); -+ if (test_bit(IPSET_MACIP_ISSET, -+ (void *) &table[req->ip - map->first_ip].flags)) { -+ return (memcmp(req->ethernet, -+ &table[req->ip - map->first_ip].ethernet, -+ ETH_ALEN) == 0); -+ } else { -+ return (map->flags & IPSET_MACIP_MATCHUNSET ? 1 : 0); -+ } -+} -+ -+static int -+testip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_macipmap *map = -+ (struct ip_set_macipmap *) set->data; -+ struct ip_set_macip *table = -+ (struct ip_set_macip *) map->members; -+ ip_set_ip_t ip; -+ -+ ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr); -+ DP("flag: %s src: %u.%u.%u.%u dst: %u.%u.%u.%u", -+ flags & IPSET_SRC ? "SRC" : "DST", -+ NIPQUAD(skb->nh.iph->saddr), -+ NIPQUAD(skb->nh.iph->daddr)); -+ -+ if (ip < map->first_ip || ip > map->last_ip) -+ return 0; -+ -+ *hash_ip = ip; -+ DP("set: %s, ip:%u.%u.%u.%u, %u.%u.%u.%u", -+ set->name, HIPQUAD(ip), HIPQUAD(*hash_ip)); -+ if (test_bit(IPSET_MACIP_ISSET, -+ (void *) &table[ip - map->first_ip].flags)) { -+ /* Is mac pointer valid? -+ * If so, compare... */ -+ return (skb->mac.raw >= skb->head -+ && (skb->mac.raw + ETH_HLEN) <= skb->data -+ && (memcmp(eth_hdr(skb)->h_source, -+ &table[ip - map->first_ip].ethernet, -+ ETH_ALEN) == 0)); -+ } else { -+ return (map->flags & IPSET_MACIP_MATCHUNSET ? 1 : 0); -+ } -+} -+ -+/* returns 0 on success */ -+static inline int -+__addip(struct ip_set *set, -+ ip_set_ip_t ip, unsigned char *ethernet, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_macipmap *map = -+ (struct ip_set_macipmap *) set->data; -+ struct ip_set_macip *table = -+ (struct ip_set_macip *) map->members; -+ -+ if (ip < map->first_ip || ip > map->last_ip) -+ return -ERANGE; -+ if (test_and_set_bit(IPSET_MACIP_ISSET, -+ (void *) &table[ip - map->first_ip].flags)) -+ return -EEXIST; -+ -+ *hash_ip = ip; -+ DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip)); -+ memcpy(&table[ip - map->first_ip].ethernet, ethernet, ETH_ALEN); -+ return 0; -+} -+ -+static int -+addip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_macipmap *req = -+ (struct ip_set_req_macipmap *) data; -+ -+ if (size != sizeof(struct ip_set_req_macipmap)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_macipmap), -+ size); -+ return -EINVAL; -+ } -+ return __addip(set, req->ip, req->ethernet, hash_ip); -+} -+ -+static int -+addip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ ip_set_ip_t ip; -+ -+ ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr); -+ -+ if (!(skb->mac.raw >= skb->head -+ && (skb->mac.raw + ETH_HLEN) <= skb->data)) -+ return -EINVAL; -+ -+ return __addip(set, ip, eth_hdr(skb)->h_source, hash_ip); -+} -+ -+static inline int -+__delip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_macipmap *map = -+ (struct ip_set_macipmap *) set->data; -+ struct ip_set_macip *table = -+ (struct ip_set_macip *) map->members; -+ -+ if (ip < map->first_ip || ip > map->last_ip) -+ return -ERANGE; -+ if (!test_and_clear_bit(IPSET_MACIP_ISSET, -+ (void *)&table[ip - map->first_ip].flags)) -+ return -EEXIST; -+ -+ *hash_ip = ip; -+ DP("%u.%u.%u.%u, %u.%u.%u.%u", HIPQUAD(ip), HIPQUAD(*hash_ip)); -+ return 0; -+} -+ -+static int -+delip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_macipmap *req = -+ (struct ip_set_req_macipmap *) data; -+ -+ if (size != sizeof(struct ip_set_req_macipmap)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_macipmap), -+ size); -+ return -EINVAL; -+ } -+ return __delip(set, req->ip, hash_ip); -+} -+ -+static int -+delip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ return __delip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+} -+ -+static inline size_t members_size(ip_set_id_t from, ip_set_id_t to) -+{ -+ return (size_t)((to - from + 1) * sizeof(struct ip_set_macip)); -+} -+ -+static int create(struct ip_set *set, const void *data, size_t size) -+{ -+ int newbytes; -+ struct ip_set_req_macipmap_create *req = -+ (struct ip_set_req_macipmap_create *) data; -+ struct ip_set_macipmap *map; -+ -+ if (size != sizeof(struct ip_set_req_macipmap_create)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_macipmap_create), -+ size); -+ return -EINVAL; -+ } -+ -+ DP("from %u.%u.%u.%u to %u.%u.%u.%u", -+ HIPQUAD(req->from), HIPQUAD(req->to)); -+ -+ if (req->from > req->to) { -+ DP("bad ip range"); -+ return -ENOEXEC; -+ } -+ -+ if (req->to - req->from > MAX_RANGE) { -+ ip_set_printk("range too big (max %d addresses)", -+ MAX_RANGE); -+ return -ENOEXEC; -+ } -+ -+ map = kmalloc(sizeof(struct ip_set_macipmap), GFP_KERNEL); -+ if (!map) { -+ DP("out of memory for %d bytes", -+ sizeof(struct ip_set_macipmap)); -+ return -ENOMEM; -+ } -+ map->flags = req->flags; -+ map->first_ip = req->from; -+ map->last_ip = req->to; -+ newbytes = members_size(map->first_ip, map->last_ip); -+ map->members = ip_set_malloc(newbytes); -+ if (!map->members) { -+ DP("out of memory for %d bytes", newbytes); -+ kfree(map); -+ return -ENOMEM; -+ } -+ memset(map->members, 0, newbytes); -+ -+ set->data = map; -+ return 0; -+} -+ -+static void destroy(struct ip_set *set) -+{ -+ struct ip_set_macipmap *map = -+ (struct ip_set_macipmap *) set->data; -+ -+ ip_set_free(map->members, members_size(map->first_ip, map->last_ip)); -+ kfree(map); -+ -+ set->data = NULL; -+} -+ -+static void flush(struct ip_set *set) -+{ -+ struct ip_set_macipmap *map = -+ (struct ip_set_macipmap *) set->data; -+ memset(map->members, 0, members_size(map->first_ip, map->last_ip)); -+} -+ -+static void list_header(const struct ip_set *set, void *data) -+{ -+ struct ip_set_macipmap *map = -+ (struct ip_set_macipmap *) set->data; -+ struct ip_set_req_macipmap_create *header = -+ (struct ip_set_req_macipmap_create *) data; -+ -+ DP("list_header %x %x %u", map->first_ip, map->last_ip, -+ map->flags); -+ -+ header->from = map->first_ip; -+ header->to = map->last_ip; -+ header->flags = map->flags; -+} -+ -+static int list_members_size(const struct ip_set *set) -+{ -+ struct ip_set_macipmap *map = -+ (struct ip_set_macipmap *) set->data; -+ -+ return members_size(map->first_ip, map->last_ip); -+} -+ -+static void list_members(const struct ip_set *set, void *data) -+{ -+ struct ip_set_macipmap *map = -+ (struct ip_set_macipmap *) set->data; -+ -+ int bytes = members_size(map->first_ip, map->last_ip); -+ -+ memcpy(data, map->members, bytes); -+} -+ -+static struct ip_set_type ip_set_macipmap = { -+ .typename = SETTYPE_NAME, -+ .typecode = IPSET_TYPE_IP, -+ .protocol_version = IP_SET_PROTOCOL_VERSION, -+ .create = &create, -+ .destroy = &destroy, -+ .flush = &flush, -+ .reqsize = sizeof(struct ip_set_req_macipmap), -+ .addip = &addip, -+ .addip_kernel = &addip_kernel, -+ .delip = &delip, -+ .delip_kernel = &delip_kernel, -+ .testip = &testip, -+ .testip_kernel = &testip_kernel, -+ .header_size = sizeof(struct ip_set_req_macipmap_create), -+ .list_header = &list_header, -+ .list_members_size = &list_members_size, -+ .list_members = &list_members, -+ .me = THIS_MODULE, -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jozsef Kadlecsik "); -+MODULE_DESCRIPTION("macipmap type of IP sets"); -+ -+static int __init init(void) -+{ -+ init_max_malloc_size(); -+ return ip_set_register_set_type(&ip_set_macipmap); -+} -+ -+static void __exit fini(void) -+{ -+ /* FIXME: possible race with ip_set_create() */ -+ ip_set_unregister_set_type(&ip_set_macipmap); -+} -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ip_set_nethash.c linux-2.6.19.dev/net/ipv4/netfilter/ip_set_nethash.c ---- linux-2.6.19.old/net/ipv4/netfilter/ip_set_nethash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ip_set_nethash.c 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,449 @@ -+/* Copyright (C) 2003-2004 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* Kernel module implementing a cidr nethash set */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+static inline __u32 -+jhash_ip(const struct ip_set_nethash *map, ip_set_ip_t ip) -+{ -+ return jhash_1word(ip, map->initval); -+} -+ -+static inline __u32 -+randhash_ip(const struct ip_set_nethash *map, ip_set_ip_t ip) -+{ -+ return (1 + ip % map->prime); -+} -+ -+static inline __u32 -+hash_id_cidr(struct ip_set_nethash *map, -+ ip_set_ip_t ip, -+ unsigned char cidr, -+ ip_set_ip_t *hash_ip) -+{ -+ __u32 jhash, randhash, id; -+ u_int16_t i; -+ -+ *hash_ip = pack(ip, cidr); -+ jhash = jhash_ip(map, *hash_ip); -+ randhash = randhash_ip(map, *hash_ip); -+ -+ for (i = 0; i < map->probes; i++) { -+ id = (jhash + i * randhash) % map->hashsize; -+ DP("hash key: %u", id); -+ if (map->members[id] == *hash_ip) -+ return id; -+ } -+ return UINT_MAX; -+} -+ -+static inline __u32 -+hash_id(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ __u32 id = UINT_MAX; -+ int i; -+ -+ for (i = 0; i < 30 && map->cidr[i]; i++) { -+ id = hash_id_cidr(map, ip, map->cidr[i], hash_ip); -+ if (id != UINT_MAX) -+ break; -+ } -+ return id; -+} -+ -+static inline int -+__testip_cidr(struct ip_set *set, ip_set_ip_t ip, unsigned char cidr, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ -+ return (hash_id_cidr(map, ip, cidr, hash_ip) != UINT_MAX); -+} -+ -+static inline int -+__testip(struct ip_set *set, ip_set_ip_t ip, ip_set_ip_t *hash_ip) -+{ -+ return (hash_id(set, ip, hash_ip) != UINT_MAX); -+} -+ -+static int -+testip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_nethash *req = -+ (struct ip_set_req_nethash *) data; -+ -+ if (size != sizeof(struct ip_set_req_nethash)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_nethash), -+ size); -+ return -EINVAL; -+ } -+ return (req->cidr == 32 ? __testip(set, req->ip, hash_ip) -+ : __testip_cidr(set, req->ip, req->cidr, hash_ip)); -+} -+ -+static int -+testip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ return __testip(set, -+ ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr), -+ hash_ip); -+} -+ -+static inline int -+__addip_base(struct ip_set_nethash *map, ip_set_ip_t ip) -+{ -+ __u32 jhash, randhash, probe; -+ u_int16_t i; -+ -+ jhash = jhash_ip(map, ip); -+ randhash = randhash_ip(map, ip); -+ -+ for (i = 0; i < map->probes; i++) { -+ probe = (jhash + i * randhash) % map->hashsize; -+ if (map->members[probe] == ip) -+ return -EEXIST; -+ if (!map->members[probe]) { -+ map->members[probe] = ip; -+ return 0; -+ } -+ } -+ /* Trigger rehashing */ -+ return -EAGAIN; -+} -+ -+static inline int -+__addip(struct ip_set_nethash *map, ip_set_ip_t ip, unsigned char cidr, -+ ip_set_ip_t *hash_ip) -+{ -+ *hash_ip = pack(ip, cidr); -+ DP("%u.%u.%u.%u/%u, %u.%u.%u.%u", HIPQUAD(ip), cidr, HIPQUAD(*hash_ip)); -+ -+ return __addip_base(map, *hash_ip); -+} -+ -+static void -+update_cidr_sizes(struct ip_set_nethash *map, unsigned char cidr) -+{ -+ unsigned char next; -+ int i; -+ -+ for (i = 0; i < 30 && map->cidr[i]; i++) { -+ if (map->cidr[i] == cidr) { -+ return; -+ } else if (map->cidr[i] < cidr) { -+ next = map->cidr[i]; -+ map->cidr[i] = cidr; -+ cidr = next; -+ } -+ } -+ if (i < 30) -+ map->cidr[i] = cidr; -+} -+ -+static int -+addip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_nethash *req = -+ (struct ip_set_req_nethash *) data; -+ int ret; -+ -+ if (size != sizeof(struct ip_set_req_nethash)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_nethash), -+ size); -+ return -EINVAL; -+ } -+ ret = __addip((struct ip_set_nethash *) set->data, -+ req->ip, req->cidr, hash_ip); -+ -+ if (ret == 0) -+ update_cidr_sizes((struct ip_set_nethash *) set->data, -+ req->cidr); -+ -+ return ret; -+} -+ -+static int -+addip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ int ret = -ERANGE; -+ ip_set_ip_t ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr); -+ -+ if (map->cidr[0]) -+ ret = __addip(map, ip, map->cidr[0], hash_ip); -+ -+ return ret; -+} -+ -+static int retry(struct ip_set *set) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ ip_set_ip_t *members; -+ u_int32_t i, hashsize; -+ unsigned newbytes; -+ int res; -+ struct ip_set_nethash tmp = { -+ .hashsize = map->hashsize, -+ .probes = map->probes, -+ .resize = map->resize -+ }; -+ -+ if (map->resize == 0) -+ return -ERANGE; -+ -+ memcpy(tmp.cidr, map->cidr, 30 * sizeof(unsigned char)); -+ again: -+ res = 0; -+ -+ /* Calculate new parameters */ -+ get_random_bytes(&tmp.initval, 4); -+ hashsize = tmp.hashsize + (tmp.hashsize * map->resize)/100; -+ if (hashsize == tmp.hashsize) -+ hashsize++; -+ tmp.prime = make_prime(hashsize); -+ -+ ip_set_printk("rehashing of set %s triggered: " -+ "hashsize grows from %u to %u", -+ set->name, tmp.hashsize, hashsize); -+ tmp.hashsize = hashsize; -+ -+ newbytes = hashsize * sizeof(ip_set_ip_t); -+ tmp.members = ip_set_malloc_atomic(newbytes); -+ if (!tmp.members) { -+ DP("out of memory for %d bytes", newbytes); -+ return -ENOMEM; -+ } -+ memset(tmp.members, 0, newbytes); -+ -+ write_lock_bh(&set->lock); -+ map = (struct ip_set_nethash *) set->data; /* Play safe */ -+ for (i = 0; i < map->hashsize && res == 0; i++) { -+ if (map->members[i]) -+ res = __addip_base(&tmp, map->members[i]); -+ } -+ if (res) { -+ /* Failure, try again */ -+ write_unlock_bh(&set->lock); -+ ip_set_free(tmp.members, newbytes); -+ goto again; -+ } -+ -+ /* Success at resizing! */ -+ members = map->members; -+ hashsize = map->hashsize; -+ -+ map->initval = tmp.initval; -+ map->prime = tmp.prime; -+ map->hashsize = tmp.hashsize; -+ map->members = tmp.members; -+ write_unlock_bh(&set->lock); -+ -+ ip_set_free(members, hashsize * sizeof(ip_set_ip_t)); -+ -+ return 0; -+} -+ -+static inline int -+__delip(struct ip_set_nethash *map, ip_set_ip_t ip, unsigned char cidr, -+ ip_set_ip_t *hash_ip) -+{ -+ ip_set_ip_t id = hash_id_cidr(map, ip, cidr, hash_ip); -+ -+ if (id == UINT_MAX) -+ return -EEXIST; -+ -+ map->members[id] = 0; -+ return 0; -+} -+ -+static int -+delip(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_req_nethash *req = -+ (struct ip_set_req_nethash *) data; -+ -+ if (size != sizeof(struct ip_set_req_nethash)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_nethash), -+ size); -+ return -EINVAL; -+ } -+ /* TODO: no garbage collection in map->cidr */ -+ return __delip((struct ip_set_nethash *) set->data, -+ req->ip, req->cidr, hash_ip); -+} -+ -+static int -+delip_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_ip) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ int ret = -ERANGE; -+ ip_set_ip_t ip = ntohl(flags & IPSET_SRC ? skb->nh.iph->saddr -+ : skb->nh.iph->daddr); -+ -+ if (map->cidr[0]) -+ ret = __delip(map, ip, map->cidr[0], hash_ip); -+ -+ return ret; -+} -+ -+static int create(struct ip_set *set, const void *data, size_t size) -+{ -+ unsigned newbytes; -+ struct ip_set_req_nethash_create *req = -+ (struct ip_set_req_nethash_create *) data; -+ struct ip_set_nethash *map; -+ -+ if (size != sizeof(struct ip_set_req_nethash_create)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_nethash_create), -+ size); -+ return -EINVAL; -+ } -+ -+ if (req->hashsize < 1) { -+ ip_set_printk("hashsize too small"); -+ return -ENOEXEC; -+ } -+ -+ map = kmalloc(sizeof(struct ip_set_nethash), GFP_KERNEL); -+ if (!map) { -+ DP("out of memory for %d bytes", -+ sizeof(struct ip_set_nethash)); -+ return -ENOMEM; -+ } -+ get_random_bytes(&map->initval, 4); -+ map->prime = make_prime(req->hashsize); -+ map->hashsize = req->hashsize; -+ map->probes = req->probes; -+ map->resize = req->resize; -+ memset(map->cidr, 0, 30 * sizeof(unsigned char)); -+ newbytes = map->hashsize * sizeof(ip_set_ip_t); -+ map->members = ip_set_malloc(newbytes); -+ if (!map->members) { -+ DP("out of memory for %d bytes", newbytes); -+ kfree(map); -+ return -ENOMEM; -+ } -+ memset(map->members, 0, newbytes); -+ -+ set->data = map; -+ return 0; -+} -+ -+static void destroy(struct ip_set *set) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ -+ ip_set_free(map->members, map->hashsize * sizeof(ip_set_ip_t)); -+ kfree(map); -+ -+ set->data = NULL; -+} -+ -+static void flush(struct ip_set *set) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ memset(map->members, 0, map->hashsize * sizeof(ip_set_ip_t)); -+ memset(map->cidr, 0, 30 * sizeof(unsigned char)); -+} -+ -+static void list_header(const struct ip_set *set, void *data) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ struct ip_set_req_nethash_create *header = -+ (struct ip_set_req_nethash_create *) data; -+ -+ header->hashsize = map->hashsize; -+ header->probes = map->probes; -+ header->resize = map->resize; -+} -+ -+static int list_members_size(const struct ip_set *set) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ -+ return (map->hashsize * sizeof(ip_set_ip_t)); -+} -+ -+static void list_members(const struct ip_set *set, void *data) -+{ -+ struct ip_set_nethash *map = (struct ip_set_nethash *) set->data; -+ int bytes = map->hashsize * sizeof(ip_set_ip_t); -+ -+ memcpy(data, map->members, bytes); -+} -+ -+static struct ip_set_type ip_set_nethash = { -+ .typename = SETTYPE_NAME, -+ .typecode = IPSET_TYPE_IP, -+ .protocol_version = IP_SET_PROTOCOL_VERSION, -+ .create = &create, -+ .destroy = &destroy, -+ .flush = &flush, -+ .reqsize = sizeof(struct ip_set_req_nethash), -+ .addip = &addip, -+ .addip_kernel = &addip_kernel, -+ .retry = &retry, -+ .delip = &delip, -+ .delip_kernel = &delip_kernel, -+ .testip = &testip, -+ .testip_kernel = &testip_kernel, -+ .header_size = sizeof(struct ip_set_req_nethash_create), -+ .list_header = &list_header, -+ .list_members_size = &list_members_size, -+ .list_members = &list_members, -+ .me = THIS_MODULE, -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jozsef Kadlecsik "); -+MODULE_DESCRIPTION("nethash type of IP sets"); -+ -+static int __init init(void) -+{ -+ return ip_set_register_set_type(&ip_set_nethash); -+} -+ -+static void __exit fini(void) -+{ -+ /* FIXME: possible race with ip_set_create() */ -+ ip_set_unregister_set_type(&ip_set_nethash); -+} -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ip_set_portmap.c linux-2.6.19.dev/net/ipv4/netfilter/ip_set_portmap.c ---- linux-2.6.19.old/net/ipv4/netfilter/ip_set_portmap.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ip_set_portmap.c 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,325 @@ -+/* Copyright (C) 2003-2004 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* Kernel module implementing a port set type as a bitmap */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+/* We must handle non-linear skbs */ -+static inline ip_set_ip_t -+get_port(const struct sk_buff *skb, u_int32_t flags) -+{ -+ struct iphdr *iph = skb->nh.iph; -+ u_int16_t offset = ntohs(iph->frag_off) & IP_OFFSET; -+ -+ switch (iph->protocol) { -+ case IPPROTO_TCP: { -+ struct tcphdr tcph; -+ -+ /* See comments at tcp_match in ip_tables.c */ -+ if (offset) -+ return INVALID_PORT; -+ -+ if (skb_copy_bits(skb, skb->nh.iph->ihl*4, &tcph, sizeof(tcph)) < 0) -+ /* No choice either */ -+ return INVALID_PORT; -+ -+ return ntohs(flags & IPSET_SRC ? -+ tcph.source : tcph.dest); -+ } -+ case IPPROTO_UDP: { -+ struct udphdr udph; -+ -+ if (offset) -+ return INVALID_PORT; -+ -+ if (skb_copy_bits(skb, skb->nh.iph->ihl*4, &udph, sizeof(udph)) < 0) -+ /* No choice either */ -+ return INVALID_PORT; -+ -+ return ntohs(flags & IPSET_SRC ? -+ udph.source : udph.dest); -+ } -+ default: -+ return INVALID_PORT; -+ } -+} -+ -+static inline int -+__testport(struct ip_set *set, ip_set_ip_t port, ip_set_ip_t *hash_port) -+{ -+ struct ip_set_portmap *map = (struct ip_set_portmap *) set->data; -+ -+ if (port < map->first_port || port > map->last_port) -+ return -ERANGE; -+ -+ *hash_port = port; -+ DP("set: %s, port:%u, %u", set->name, port, *hash_port); -+ return !!test_bit(port - map->first_port, map->members); -+} -+ -+static int -+testport(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_port) -+{ -+ struct ip_set_req_portmap *req = -+ (struct ip_set_req_portmap *) data; -+ -+ if (size != sizeof(struct ip_set_req_portmap)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_portmap), -+ size); -+ return -EINVAL; -+ } -+ return __testport(set, req->port, hash_port); -+} -+ -+static int -+testport_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_port) -+{ -+ int res; -+ ip_set_ip_t port = get_port(skb, flags); -+ -+ DP("flag %s port %u", flags & IPSET_SRC ? "SRC" : "DST", port); -+ if (port == INVALID_PORT) -+ return 0; -+ -+ res = __testport(set, port, hash_port); -+ -+ return (res < 0 ? 0 : res); -+} -+ -+static inline int -+__addport(struct ip_set *set, ip_set_ip_t port, ip_set_ip_t *hash_port) -+{ -+ struct ip_set_portmap *map = (struct ip_set_portmap *) set->data; -+ -+ if (port < map->first_port || port > map->last_port) -+ return -ERANGE; -+ if (test_and_set_bit(port - map->first_port, map->members)) -+ return -EEXIST; -+ -+ *hash_port = port; -+ DP("port %u", port); -+ return 0; -+} -+ -+static int -+addport(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_port) -+{ -+ struct ip_set_req_portmap *req = -+ (struct ip_set_req_portmap *) data; -+ -+ if (size != sizeof(struct ip_set_req_portmap)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_portmap), -+ size); -+ return -EINVAL; -+ } -+ return __addport(set, req->port, hash_port); -+} -+ -+static int -+addport_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_port) -+{ -+ ip_set_ip_t port = get_port(skb, flags); -+ -+ if (port == INVALID_PORT) -+ return -EINVAL; -+ -+ return __addport(set, port, hash_port); -+} -+ -+static inline int -+__delport(struct ip_set *set, ip_set_ip_t port, ip_set_ip_t *hash_port) -+{ -+ struct ip_set_portmap *map = (struct ip_set_portmap *) set->data; -+ -+ if (port < map->first_port || port > map->last_port) -+ return -ERANGE; -+ if (!test_and_clear_bit(port - map->first_port, map->members)) -+ return -EEXIST; -+ -+ *hash_port = port; -+ DP("port %u", port); -+ return 0; -+} -+ -+static int -+delport(struct ip_set *set, const void *data, size_t size, -+ ip_set_ip_t *hash_port) -+{ -+ struct ip_set_req_portmap *req = -+ (struct ip_set_req_portmap *) data; -+ -+ if (size != sizeof(struct ip_set_req_portmap)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_portmap), -+ size); -+ return -EINVAL; -+ } -+ return __delport(set, req->port, hash_port); -+} -+ -+static int -+delport_kernel(struct ip_set *set, const struct sk_buff *skb, -+ u_int32_t flags, ip_set_ip_t *hash_port) -+{ -+ ip_set_ip_t port = get_port(skb, flags); -+ -+ if (port == INVALID_PORT) -+ return -EINVAL; -+ -+ return __delport(set, port, hash_port); -+} -+ -+static int create(struct ip_set *set, const void *data, size_t size) -+{ -+ int newbytes; -+ struct ip_set_req_portmap_create *req = -+ (struct ip_set_req_portmap_create *) data; -+ struct ip_set_portmap *map; -+ -+ if (size != sizeof(struct ip_set_req_portmap_create)) { -+ ip_set_printk("data length wrong (want %zu, have %zu)", -+ sizeof(struct ip_set_req_portmap_create), -+ size); -+ return -EINVAL; -+ } -+ -+ DP("from %u to %u", req->from, req->to); -+ -+ if (req->from > req->to) { -+ DP("bad port range"); -+ return -ENOEXEC; -+ } -+ -+ if (req->to - req->from > MAX_RANGE) { -+ ip_set_printk("range too big (max %d ports)", -+ MAX_RANGE); -+ return -ENOEXEC; -+ } -+ -+ map = kmalloc(sizeof(struct ip_set_portmap), GFP_KERNEL); -+ if (!map) { -+ DP("out of memory for %d bytes", -+ sizeof(struct ip_set_portmap)); -+ return -ENOMEM; -+ } -+ map->first_port = req->from; -+ map->last_port = req->to; -+ newbytes = bitmap_bytes(req->from, req->to); -+ map->members = kmalloc(newbytes, GFP_KERNEL); -+ if (!map->members) { -+ DP("out of memory for %d bytes", newbytes); -+ kfree(map); -+ return -ENOMEM; -+ } -+ memset(map->members, 0, newbytes); -+ -+ set->data = map; -+ return 0; -+} -+ -+static void destroy(struct ip_set *set) -+{ -+ struct ip_set_portmap *map = (struct ip_set_portmap *) set->data; -+ -+ kfree(map->members); -+ kfree(map); -+ -+ set->data = NULL; -+} -+ -+static void flush(struct ip_set *set) -+{ -+ struct ip_set_portmap *map = (struct ip_set_portmap *) set->data; -+ memset(map->members, 0, bitmap_bytes(map->first_port, map->last_port)); -+} -+ -+static void list_header(const struct ip_set *set, void *data) -+{ -+ struct ip_set_portmap *map = (struct ip_set_portmap *) set->data; -+ struct ip_set_req_portmap_create *header = -+ (struct ip_set_req_portmap_create *) data; -+ -+ DP("list_header %u %u", map->first_port, map->last_port); -+ -+ header->from = map->first_port; -+ header->to = map->last_port; -+} -+ -+static int list_members_size(const struct ip_set *set) -+{ -+ struct ip_set_portmap *map = (struct ip_set_portmap *) set->data; -+ -+ return bitmap_bytes(map->first_port, map->last_port); -+} -+ -+static void list_members(const struct ip_set *set, void *data) -+{ -+ struct ip_set_portmap *map = (struct ip_set_portmap *) set->data; -+ int bytes = bitmap_bytes(map->first_port, map->last_port); -+ -+ memcpy(data, map->members, bytes); -+} -+ -+static struct ip_set_type ip_set_portmap = { -+ .typename = SETTYPE_NAME, -+ .typecode = IPSET_TYPE_PORT, -+ .protocol_version = IP_SET_PROTOCOL_VERSION, -+ .create = &create, -+ .destroy = &destroy, -+ .flush = &flush, -+ .reqsize = sizeof(struct ip_set_req_portmap), -+ .addip = &addport, -+ .addip_kernel = &addport_kernel, -+ .delip = &delport, -+ .delip_kernel = &delport_kernel, -+ .testip = &testport, -+ .testip_kernel = &testport_kernel, -+ .header_size = sizeof(struct ip_set_req_portmap_create), -+ .list_header = &list_header, -+ .list_members_size = &list_members_size, -+ .list_members = &list_members, -+ .me = THIS_MODULE, -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jozsef Kadlecsik "); -+MODULE_DESCRIPTION("portmap type of IP sets"); -+ -+static int __init init(void) -+{ -+ return ip_set_register_set_type(&ip_set_portmap); -+} -+ -+static void __exit fini(void) -+{ -+ /* FIXME: possible race with ip_set_create() */ -+ ip_set_unregister_set_type(&ip_set_portmap); -+} -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ipt_set.c linux-2.6.19.dev/net/ipv4/netfilter/ipt_set.c ---- linux-2.6.19.old/net/ipv4/netfilter/ipt_set.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ipt_set.c 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,105 @@ -+/* Copyright (C) 2000-2002 Joakim Axelsson -+ * Patrick Schaaf -+ * Martin Josefsson -+ * Copyright (C) 2003-2004 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* Kernel module to match an IP set. */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+static inline int -+match_set(const struct ipt_set_info *info, -+ const struct sk_buff *skb, -+ int inv) -+{ -+ if (ip_set_testip_kernel(info->index, skb, info->flags)) -+ inv = !inv; -+ return inv; -+} -+ -+static int -+match(const struct sk_buff *skb, -+ const struct net_device *in, -+ const struct net_device *out, -+ const struct xt_match *match, -+ const void *matchinfo, -+ int offset, -+ unsigned int protoff, -+ int *hotdrop) -+{ -+ const struct ipt_set_info_match *info = matchinfo; -+ -+ return match_set(&info->match_set, -+ skb, -+ info->match_set.flags[0] & IPSET_MATCH_INV); -+} -+ -+static int -+checkentry(const char *tablename, -+ const void *ip, -+ const struct xt_match *match, -+ void *matchinfo, -+ unsigned int hook_mask) -+{ -+ struct ipt_set_info_match *info = -+ (struct ipt_set_info_match *) matchinfo; -+ ip_set_id_t index; -+ -+ index = ip_set_get_byindex(info->match_set.index); -+ -+ if (index == IP_SET_INVALID_ID) { -+ ip_set_printk("Cannot find set indentified by id %u to match", -+ info->match_set.index); -+ return 0; /* error */ -+ } -+ if (info->match_set.flags[IP_SET_MAX_BINDINGS] != 0) { -+ ip_set_printk("That's nasty!"); -+ return 0; /* error */ -+ } -+ -+ return 1; -+} -+ -+static void destroy(const struct xt_match *match, void *matchinfo) -+{ -+ struct ipt_set_info_match *info = matchinfo; -+ -+ ip_set_put(info->match_set.index); -+} -+ -+static struct ipt_match set_match = { -+ .name = "set", -+ .match = &match, -+ .matchsize = sizeof(struct ipt_set_info_match), -+ .checkentry = &checkentry, -+ .destroy = &destroy, -+ .me = THIS_MODULE -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jozsef Kadlecsik "); -+MODULE_DESCRIPTION("iptables IP set match module"); -+ -+static int __init init(void) -+{ -+ return ipt_register_match(&set_match); -+} -+ -+static void __exit fini(void) -+{ -+ ipt_unregister_match(&set_match); -+} -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ipt_SET.c linux-2.6.19.dev/net/ipv4/netfilter/ipt_SET.c ---- linux-2.6.19.old/net/ipv4/netfilter/ipt_SET.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ipt_SET.c 2006-12-14 03:13:43.000000000 +0100 -@@ -0,0 +1,120 @@ -+/* Copyright (C) 2000-2002 Joakim Axelsson -+ * Patrick Schaaf -+ * Martin Josefsson -+ * Copyright (C) 2003-2004 Jozsef Kadlecsik -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/* ipt_SET.c - netfilter target to manipulate IP sets */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static unsigned int -+target(struct sk_buff **pskb, -+ const struct net_device *in, -+ const struct net_device *out, -+ unsigned int hooknum, -+ const struct xt_target *target, -+ const void *targinfo) -+{ -+ const struct ipt_set_info_target *info = targinfo; -+ -+ if (info->add_set.index != IP_SET_INVALID_ID) -+ ip_set_addip_kernel(info->add_set.index, -+ *pskb, -+ info->add_set.flags); -+ if (info->del_set.index != IP_SET_INVALID_ID) -+ ip_set_delip_kernel(info->del_set.index, -+ *pskb, -+ info->del_set.flags); -+ -+ return IPT_CONTINUE; -+} -+ -+static int -+checkentry(const char *tablename, -+ const void *e, -+ const struct xt_target *target, -+ void *targinfo, -+ unsigned int hook_mask) -+{ -+ struct ipt_set_info_target *info = -+ (struct ipt_set_info_target *) targinfo; -+ ip_set_id_t index; -+ -+ if (info->add_set.index != IP_SET_INVALID_ID) { -+ index = ip_set_get_byindex(info->add_set.index); -+ if (index == IP_SET_INVALID_ID) { -+ ip_set_printk("cannot find add_set index %u as target", -+ info->add_set.index); -+ return 0; /* error */ -+ } -+ } -+ -+ if (info->del_set.index != IP_SET_INVALID_ID) { -+ index = ip_set_get_byindex(info->del_set.index); -+ if (index == IP_SET_INVALID_ID) { -+ ip_set_printk("cannot find del_set index %u as target", -+ info->del_set.index); -+ return 0; /* error */ -+ } -+ } -+ if (info->add_set.flags[IP_SET_MAX_BINDINGS] != 0 -+ || info->del_set.flags[IP_SET_MAX_BINDINGS] != 0) { -+ ip_set_printk("That's nasty!"); -+ return 0; /* error */ -+ } -+ -+ return 1; -+} -+ -+static void destroy(const struct xt_target *target, void *targetinfo) -+{ -+ struct ipt_set_info_target *info = targetinfo; -+ -+ if (info->add_set.index != IP_SET_INVALID_ID) -+ ip_set_put(info->add_set.index); -+ if (info->del_set.index != IP_SET_INVALID_ID) -+ ip_set_put(info->del_set.index); -+} -+ -+static struct ipt_target SET_target = { -+ .name = "SET", -+ .target = target, -+ .targetsize = sizeof(struct ipt_set_info_target), -+ .checkentry = checkentry, -+ .destroy = destroy, -+ .me = THIS_MODULE -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jozsef Kadlecsik "); -+MODULE_DESCRIPTION("iptables IP set target module"); -+ -+static int __init init(void) -+{ -+ return ipt_register_target(&SET_target); -+} -+ -+static void __exit fini(void) -+{ -+ ipt_unregister_target(&SET_target); -+} -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/Kconfig linux-2.6.19.dev/net/ipv4/netfilter/Kconfig ---- linux-2.6.19.old/net/ipv4/netfilter/Kconfig 2006-12-14 03:13:41.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/Kconfig 2006-12-14 03:13:43.000000000 +0100 -@@ -647,5 +647,106 @@ - Allows altering the ARP packet payload: source and destination - hardware and network addresses. - -+config IP_NF_SET -+ tristate "IP set support" -+ depends on INET && NETFILTER -+ help -+ This option adds IP set support to the kernel. -+ In order to define and use sets, you need the userspace utility -+ ipset(8). -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config IP_NF_SET_MAX -+ int "Maximum number of IP sets" -+ default 256 -+ range 2 65534 -+ depends on IP_NF_SET -+ help -+ You can define here default value of the maximum number -+ of IP sets for the kernel. -+ -+ The value can be overriden by the 'max_sets' module -+ parameter of the 'ip_set' module. -+ -+config IP_NF_SET_HASHSIZE -+ int "Hash size for bindings of IP sets" -+ default 1024 -+ depends on IP_NF_SET -+ help -+ You can define here default value of the hash size for -+ bindings of IP sets. -+ -+ The value can be overriden by the 'hash_size' module -+ parameter of the 'ip_set' module. -+ -+config IP_NF_SET_IPMAP -+ tristate "ipmap set support" -+ depends on IP_NF_SET -+ help -+ This option adds the ipmap set type support. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config IP_NF_SET_MACIPMAP -+ tristate "macipmap set support" -+ depends on IP_NF_SET -+ help -+ This option adds the macipmap set type support. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config IP_NF_SET_PORTMAP -+ tristate "portmap set support" -+ depends on IP_NF_SET -+ help -+ This option adds the portmap set type support. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config IP_NF_SET_IPHASH -+ tristate "iphash set support" -+ depends on IP_NF_SET -+ help -+ This option adds the iphash set type support. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config IP_NF_SET_NETHASH -+ tristate "nethash set support" -+ depends on IP_NF_SET -+ help -+ This option adds the nethash set type support. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config IP_NF_SET_IPTREE -+ tristate "iptree set support" -+ depends on IP_NF_SET -+ help -+ This option adds the iptree set type support. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config IP_NF_MATCH_SET -+ tristate "set match support" -+ depends on IP_NF_SET -+ help -+ Set matching matches against given IP sets. -+ You need the ipset utility to create and set up the sets. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+config IP_NF_TARGET_SET -+ tristate "SET target support" -+ depends on IP_NF_SET -+ help -+ The SET target makes possible to add/delete entries -+ in IP sets. -+ You need the ipset utility to create and set up the sets. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ -+ - endmenu - -diff -urN linux-2.6.19.old/net/ipv4/netfilter/Makefile linux-2.6.19.dev/net/ipv4/netfilter/Makefile ---- linux-2.6.19.old/net/ipv4/netfilter/Makefile 2006-12-14 03:13:41.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/Makefile 2006-12-14 03:13:43.000000000 +0100 -@@ -54,6 +54,7 @@ - - # matches - obj-$(CONFIG_IP_NF_MATCH_HASHLIMIT) += ipt_hashlimit.o -+obj-$(CONFIG_IP_NF_MATCH_SET) += ipt_set.o - obj-$(CONFIG_IP_NF_MATCH_IPRANGE) += ipt_iprange.o - obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o - obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o -@@ -77,6 +78,17 @@ - obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o - obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o - obj-$(CONFIG_IP_NF_TARGET_TCPMSS) += ipt_TCPMSS.o -+obj-$(CONFIG_IP_NF_TARGET_SET) += ipt_SET.o -+ -+# sets -+obj-$(CONFIG_IP_NF_SET) += ip_set.o -+obj-$(CONFIG_IP_NF_SET_IPMAP) += ip_set_ipmap.o -+obj-$(CONFIG_IP_NF_SET_PORTMAP) += ip_set_portmap.o -+obj-$(CONFIG_IP_NF_SET_MACIPMAP) += ip_set_macipmap.o -+obj-$(CONFIG_IP_NF_SET_IPHASH) += ip_set_iphash.o -+obj-$(CONFIG_IP_NF_SET_NETHASH) += ip_set_nethash.o -+obj-$(CONFIG_IP_NF_SET_IPTREE) += ip_set_iptree.o -+ - obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o - obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o - diff --git a/target/linux/etrax/patches/generic_2.6/140-netfilter_time.patch b/target/linux/etrax/patches/generic_2.6/140-netfilter_time.patch deleted file mode 100644 index d217157d78..0000000000 --- a/target/linux/etrax/patches/generic_2.6/140-netfilter_time.patch +++ /dev/null @@ -1,241 +0,0 @@ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ipt_time.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ipt_time.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ipt_time.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ipt_time.h 2006-12-14 03:13:45.000000000 +0100 -@@ -0,0 +1,18 @@ -+#ifndef __ipt_time_h_included__ -+#define __ipt_time_h_included__ -+ -+ -+struct ipt_time_info { -+ u_int8_t days_match; /* 1 bit per day. -SMTWTFS */ -+ u_int16_t time_start; /* 0 < time_start < 23*60+59 = 1439 */ -+ u_int16_t time_stop; /* 0:0 < time_stat < 23:59 */ -+ -+ /* FIXME: Keep this one for userspace iptables binary compability: */ -+ u_int8_t kerneltime; /* ignore skb time (and use kerneltime) or not. */ -+ -+ time_t date_start; -+ time_t date_stop; -+}; -+ -+ -+#endif /* __ipt_time_h_included__ */ -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ipt_time.c linux-2.6.19.dev/net/ipv4/netfilter/ipt_time.c ---- linux-2.6.19.old/net/ipv4/netfilter/ipt_time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ipt_time.c 2006-12-14 03:13:45.000000000 +0100 -@@ -0,0 +1,178 @@ -+/* -+ This is a module which is used for time matching -+ It is using some modified code from dietlibc (localtime() function) -+ that you can find at http://www.fefe.de/dietlibc/ -+ This file is distributed under the terms of the GNU General Public -+ License (GPL). Copies of the GPL can be obtained from: ftp://prep.ai.mit.edu/pub/gnu/GPL -+ 2001-05-04 Fabrice MARIE : initial development. -+ 2001-21-05 Fabrice MARIE : bug fix in the match code, -+ thanks to "Zeng Yu" for bug report. -+ 2001-26-09 Fabrice MARIE : force the match to be in LOCAL_IN or PRE_ROUTING only. -+ 2001-30-11 Fabrice : added the possibility to use the match in FORWARD/OUTPUT with a little hack, -+ added Nguyen Dang Phuoc Dong patch to support timezones. -+ 2004-05-02 Fabrice : added support for date matching, from an idea of Fabien COELHO. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+ -+MODULE_AUTHOR("Fabrice MARIE "); -+MODULE_DESCRIPTION("Match arrival timestamp/date"); -+MODULE_LICENSE("GPL"); -+ -+struct tm -+{ -+ int tm_sec; /* Seconds. [0-60] (1 leap second) */ -+ int tm_min; /* Minutes. [0-59] */ -+ int tm_hour; /* Hours. [0-23] */ -+ int tm_mday; /* Day. [1-31] */ -+ int tm_mon; /* Month. [0-11] */ -+ int tm_year; /* Year - 1900. */ -+ int tm_wday; /* Day of week. [0-6] */ -+ int tm_yday; /* Days in year.[0-365] */ -+ int tm_isdst; /* DST. [-1/0/1]*/ -+ -+ long int tm_gmtoff; /* we don't care, we count from GMT */ -+ const char *tm_zone; /* we don't care, we count from GMT */ -+}; -+ -+void -+localtime(const u32 time, struct tm *r); -+ -+static int -+match(const struct sk_buff *skb, -+ const struct net_device *in, -+ const struct net_device *out, -+ const struct xt_match *match, -+ const void *matchinfo, -+ int offset, -+ unsigned int protoff, -+ int *hotdrop) -+{ -+ const struct ipt_time_info *info = matchinfo; /* match info for rule */ -+ struct tm currenttime; /* time human readable */ -+ u_int8_t days_of_week[7] = {64, 32, 16, 8, 4, 2, 1}; -+ u_int16_t packet_time; -+ -+ /* We might not have a timestamp, get one */ -+ if (skb->tstamp.off_sec == 0) -+ __net_timestamp((struct sk_buff *)skb); -+ -+ /* First we make sure we are in the date start-stop boundaries */ -+ if ((skb->tstamp.off_sec < info->date_start) || (skb->tstamp.off_sec > info->date_stop)) -+ return 0; /* We are outside the date boundaries */ -+ -+ /* Transform the timestamp of the packet, in a human readable form */ -+ localtime(skb->tstamp.off_sec, ¤ttime); -+ -+ /* check if we match this timestamp, we start by the days... */ -+ if ((days_of_week[currenttime.tm_wday] & info->days_match) != days_of_week[currenttime.tm_wday]) -+ return 0; /* the day doesn't match */ -+ -+ /* ... check the time now */ -+ packet_time = (currenttime.tm_hour * 60) + currenttime.tm_min; -+ if ((packet_time < info->time_start) || (packet_time > info->time_stop)) -+ return 0; -+ -+ /* here we match ! */ -+ return 1; -+} -+ -+static int -+checkentry(const char *tablename, -+ const void *ip, -+ const struct xt_match *match, -+ void *matchinfo, -+ unsigned int hook_mask) -+{ -+ struct ipt_time_info *info = matchinfo; /* match info for rule */ -+ -+ /* First, check that we are in the correct hooks */ -+ if (hook_mask -+ & ~((1 << NF_IP_PRE_ROUTING) | (1 << NF_IP_LOCAL_IN) | (1 << NF_IP_FORWARD) | (1 << NF_IP_LOCAL_OUT))) -+ { -+ printk("ipt_time: error, only valid for PRE_ROUTING, LOCAL_IN, FORWARD and OUTPUT)\n"); -+ return 0; -+ } -+ -+ /* Now check the coherence of the data ... */ -+ if ((info->time_start > 1439) || /* 23*60+59 = 1439*/ -+ (info->time_stop > 1439)) -+ { -+ printk(KERN_WARNING "ipt_time: invalid argument\n"); -+ return 0; -+ } -+ -+ return 1; -+} -+ -+static struct ipt_match time_match = { -+ .name = "time", -+ .match = &match, -+ .matchsize = sizeof(struct ipt_time_info), -+ .checkentry = &checkentry, -+ .me = THIS_MODULE -+}; -+ -+static int __init init(void) -+{ -+ printk("ipt_time loading\n"); -+ return ipt_register_match(&time_match); -+} -+ -+static void __exit fini(void) -+{ -+ ipt_unregister_match(&time_match); -+ printk("ipt_time unloaded\n"); -+} -+ -+module_init(init); -+module_exit(fini); -+ -+ -+/* The part below is borowed and modified from dietlibc */ -+ -+/* seconds per day */ -+#define SPD 24*60*60 -+ -+void -+localtime(const u32 time, struct tm *r) { -+ u32 i, timep; -+ extern struct timezone sys_tz; -+ const unsigned int __spm[12] = -+ { 0, -+ (31), -+ (31+28), -+ (31+28+31), -+ (31+28+31+30), -+ (31+28+31+30+31), -+ (31+28+31+30+31+30), -+ (31+28+31+30+31+30+31), -+ (31+28+31+30+31+30+31+31), -+ (31+28+31+30+31+30+31+31+30), -+ (31+28+31+30+31+30+31+31+30+31), -+ (31+28+31+30+31+30+31+31+30+31+30), -+ }; -+ register u32 work; -+ -+ timep = time - (sys_tz.tz_minuteswest * 60); -+ work=timep%(SPD); -+ r->tm_sec=work%60; work/=60; -+ r->tm_min=work%60; r->tm_hour=work/60; -+ work=timep/(SPD); -+ r->tm_wday=(4+work)%7; -+ for (i=1970; ; ++i) { -+ register time_t k= (!(i%4) && ((i%100) || !(i%400)))?366:365; -+ if (work>k) -+ work-=k; -+ else -+ break; -+ } -+ r->tm_year=i-1900; -+ for (i=11; i && __spm[i]>work; --i) ; -+ r->tm_mon=i; -+ r->tm_mday=work-__spm[i]+1; -+} -diff -urN linux-2.6.19.old/net/ipv4/netfilter/Kconfig linux-2.6.19.dev/net/ipv4/netfilter/Kconfig ---- linux-2.6.19.old/net/ipv4/netfilter/Kconfig 2006-12-14 03:13:45.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/Kconfig 2006-12-14 03:13:45.000000000 +0100 -@@ -263,6 +263,22 @@ - - To compile it as a module, choose M here. If unsure, say N. - -+ -+config IP_NF_MATCH_TIME -+ tristate 'TIME match support' -+ depends on IP_NF_IPTABLES -+ help -+ This option adds a `time' match, which allows you -+ to match based on the packet arrival time/date -+ (arrival time/date at the machine which netfilter is running on) or -+ departure time/date (for locally generated packets). -+ -+ If you say Y here, try iptables -m time --help for more information. -+ If you want to compile it as a module, say M here and read -+ -+ Documentation/modules.txt. If unsure, say `N'. -+ -+ - config IP_NF_MATCH_RECENT - tristate "recent match support" - depends on IP_NF_IPTABLES -diff -urN linux-2.6.19.old/net/ipv4/netfilter/Makefile linux-2.6.19.dev/net/ipv4/netfilter/Makefile ---- linux-2.6.19.old/net/ipv4/netfilter/Makefile 2006-12-14 03:13:45.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/Makefile 2006-12-14 03:13:45.000000000 +0100 -@@ -58,6 +58,7 @@ - obj-$(CONFIG_IP_NF_MATCH_IPRANGE) += ipt_iprange.o - obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o - obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o -+obj-$(CONFIG_IP_NF_MATCH_TIME) += ipt_time.o - obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o - obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o - obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o diff --git a/target/linux/etrax/patches/generic_2.6/150-netfilter_imq.patch b/target/linux/etrax/patches/generic_2.6/150-netfilter_imq.patch deleted file mode 100644 index 54324022a9..0000000000 --- a/target/linux/etrax/patches/generic_2.6/150-netfilter_imq.patch +++ /dev/null @@ -1,892 +0,0 @@ -diff -urN linux-2.6.19/drivers/net/imq.c linux-2.6.19+imq/drivers/net/imq.c ---- linux-2.6.19/drivers/net/imq.c 1970-01-01 09:30:00.000000000 +0930 -+++ linux-2.6.19+imq/drivers/net/imq.c 2006-12-05 23:01:02.000000000 +1030 -@@ -0,0 +1,402 @@ -+/* -+ * Pseudo-driver for the intermediate queue device. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ * -+ * Authors: Patrick McHardy, -+ * -+ * The first version was written by Martin Devera, -+ * -+ * Credits: Jan Rafaj -+ * - Update patch to 2.4.21 -+ * Sebastian Strollo -+ * - Fix "Dead-loop on netdevice imq"-issue -+ * Marcel Sebek -+ * - Update to 2.6.2-rc1 -+ * -+ * After some time of inactivity there is a group taking care -+ * of IMQ again: http://www.linuximq.net -+ * -+ * -+ * 2004/06/30 - New version of IMQ patch to kernels <=2.6.7 including -+ * the following changes: -+ * -+ * - Correction of ipv6 support "+"s issue (Hasso Tepper) -+ * - Correction of imq_init_devs() issue that resulted in -+ * kernel OOPS unloading IMQ as module (Norbert Buchmuller) -+ * - Addition of functionality to choose number of IMQ devices -+ * during kernel config (Andre Correa) -+ * - Addition of functionality to choose how IMQ hooks on -+ * PRE and POSTROUTING (after or before NAT) (Andre Correa) -+ * - Cosmetic corrections (Norbert Buchmuller) (Andre Correa) -+ * -+ * -+ * 2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were -+ * released with almost no problems. 2.6.14-x was released -+ * with some important changes: nfcache was removed; After -+ * some weeks of trouble we figured out that some IMQ fields -+ * in skb were missing in skbuff.c - skb_clone and copy_skb_header. -+ * These functions are correctly patched by this new patch version. -+ * -+ * Thanks for all who helped to figure out all the problems with -+ * 2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX, -+ * Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully -+ * I didn't forget anybody). I apologize again for my lack of time. -+ * -+ * More info at: http://www.linuximq.net/ (Andre Correa) -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) -+ #include -+#endif -+#include -+#include -+ -+extern int qdisc_restart1(struct net_device *dev); -+ -+static nf_hookfn imq_nf_hook; -+ -+static struct nf_hook_ops imq_ingress_ipv4 = { -+ .hook = imq_nf_hook, -+ .owner = THIS_MODULE, -+ .pf = PF_INET, -+ .hooknum = NF_IP_PRE_ROUTING, -+#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB) -+ .priority = NF_IP_PRI_MANGLE + 1 -+#else -+ .priority = NF_IP_PRI_NAT_DST + 1 -+#endif -+}; -+ -+static struct nf_hook_ops imq_egress_ipv4 = { -+ .hook = imq_nf_hook, -+ .owner = THIS_MODULE, -+ .pf = PF_INET, -+ .hooknum = NF_IP_POST_ROUTING, -+#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA) -+ .priority = NF_IP_PRI_LAST -+#else -+ .priority = NF_IP_PRI_NAT_SRC - 1 -+#endif -+}; -+ -+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) -+static struct nf_hook_ops imq_ingress_ipv6 = { -+ .hook = imq_nf_hook, -+ .owner = THIS_MODULE, -+ .pf = PF_INET6, -+ .hooknum = NF_IP6_PRE_ROUTING, -+#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB) -+ .priority = NF_IP6_PRI_MANGLE + 1 -+#else -+ .priority = NF_IP6_PRI_NAT_DST + 1 -+#endif -+}; -+ -+static struct nf_hook_ops imq_egress_ipv6 = { -+ .hook = imq_nf_hook, -+ .owner = THIS_MODULE, -+ .pf = PF_INET6, -+ .hooknum = NF_IP6_POST_ROUTING, -+#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA) -+ .priority = NF_IP6_PRI_LAST -+#else -+ .priority = NF_IP6_PRI_NAT_SRC - 1 -+#endif -+}; -+#endif -+ -+#if defined(CONFIG_IMQ_NUM_DEVS) -+static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS; -+#else -+static unsigned int numdevs = 2; -+#endif -+ -+static struct net_device *imq_devs; -+ -+static struct net_device_stats *imq_get_stats(struct net_device *dev) -+{ -+ return (struct net_device_stats *)dev->priv; -+} -+ -+/* called for packets kfree'd in qdiscs at places other than enqueue */ -+static void imq_skb_destructor(struct sk_buff *skb) -+{ -+ struct nf_info *info = skb->nf_info; -+ -+ if (info) { -+ if (info->indev) -+ dev_put(info->indev); -+ if (info->outdev) -+ dev_put(info->outdev); -+ kfree(info); -+ } -+} -+ -+static int imq_dev_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct net_device_stats *stats = (struct net_device_stats*) dev->priv; -+ -+ stats->tx_bytes += skb->len; -+ stats->tx_packets++; -+ -+ skb->imq_flags = 0; -+ skb->destructor = NULL; -+ -+ dev->trans_start = jiffies; -+ nf_reinject(skb, skb->nf_info, NF_ACCEPT); -+ return 0; -+} -+ -+static int imq_nf_queue(struct sk_buff *skb, struct nf_info *info, unsigned queue_num, void *data) -+{ -+ struct net_device *dev; -+ struct net_device_stats *stats; -+ struct sk_buff *skb2 = NULL; -+ struct Qdisc *q; -+ unsigned int index = skb->imq_flags&IMQ_F_IFMASK; -+ int ret = -1; -+ -+ if (index > numdevs) -+ return -1; -+ -+ dev = imq_devs + index; -+ if (!(dev->flags & IFF_UP)) { -+ skb->imq_flags = 0; -+ nf_reinject(skb, info, NF_ACCEPT); -+ return 0; -+ } -+ dev->last_rx = jiffies; -+ -+ if (skb->destructor) { -+ skb2 = skb; -+ skb = skb_clone(skb, GFP_ATOMIC); -+ if (!skb) -+ return -1; -+ } -+ skb->nf_info = info; -+ -+ stats = (struct net_device_stats *)dev->priv; -+ stats->rx_bytes+= skb->len; -+ stats->rx_packets++; -+ -+ spin_lock_bh(&dev->queue_lock); -+ q = dev->qdisc; -+ if (q->enqueue) { -+ q->enqueue(skb_get(skb), q); -+ if (skb_shared(skb)) { -+ skb->destructor = imq_skb_destructor; -+ kfree_skb(skb); -+ ret = 0; -+ } -+ } -+ if (spin_is_locked(&dev->_xmit_lock)) -+ netif_schedule(dev); -+ else -+ while (!netif_queue_stopped(dev) && qdisc_restart1(dev) < 0) -+ /* NOTHING */; -+ -+ spin_unlock_bh(&dev->queue_lock); -+ -+ if (skb2) -+ kfree_skb(ret ? skb : skb2); -+ -+ return ret; -+} -+ -+static struct nf_queue_handler nfqh = { -+ .name = "imq", -+ .outfn = imq_nf_queue, -+}; -+ -+static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff **pskb, -+ const struct net_device *indev, -+ const struct net_device *outdev, -+ int (*okfn)(struct sk_buff *)) -+{ -+ if ((*pskb)->imq_flags & IMQ_F_ENQUEUE) -+ return NF_QUEUE; -+ -+ return NF_ACCEPT; -+} -+ -+ -+static int __init imq_init_hooks(void) -+{ -+ int err; -+ -+ err = nf_register_queue_handler(PF_INET, &nfqh); -+ if (err > 0) -+ goto err1; -+ if ((err = nf_register_hook(&imq_ingress_ipv4))) -+ goto err2; -+ if ((err = nf_register_hook(&imq_egress_ipv4))) -+ goto err3; -+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) -+ if ((err = nf_register_queue_handler(PF_INET6, &nfqh))) -+ goto err4; -+ if ((err = nf_register_hook(&imq_ingress_ipv6))) -+ goto err5; -+ if ((err = nf_register_hook(&imq_egress_ipv6))) -+ goto err6; -+#endif -+ -+ return 0; -+ -+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) -+err6: -+ nf_unregister_hook(&imq_ingress_ipv6); -+err5: -+ nf_unregister_queue_handler(PF_INET6); -+err4: -+ nf_unregister_hook(&imq_egress_ipv6); -+#endif -+err3: -+ nf_unregister_hook(&imq_ingress_ipv4); -+err2: -+ nf_unregister_queue_handler(PF_INET); -+err1: -+ return err; -+} -+ -+static void __exit imq_unhook(void) -+{ -+ nf_unregister_hook(&imq_ingress_ipv4); -+ nf_unregister_hook(&imq_egress_ipv4); -+ nf_unregister_queue_handler(PF_INET); -+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) -+ nf_unregister_hook(&imq_ingress_ipv6); -+ nf_unregister_hook(&imq_egress_ipv6); -+ nf_unregister_queue_handler(PF_INET6); -+#endif -+} -+ -+static int __init imq_dev_init(struct net_device *dev) -+{ -+ dev->hard_start_xmit = imq_dev_xmit; -+ dev->type = ARPHRD_VOID; -+ dev->mtu = 1500; -+ dev->tx_queue_len = 30; -+ dev->flags = IFF_NOARP; -+ dev->priv = kmalloc(sizeof(struct net_device_stats), GFP_KERNEL); -+ if (dev->priv == NULL) -+ return -ENOMEM; -+ memset(dev->priv, 0, sizeof(struct net_device_stats)); -+ dev->get_stats = imq_get_stats; -+ -+ return 0; -+} -+ -+static void imq_dev_uninit(struct net_device *dev) -+{ -+ kfree(dev->priv); -+} -+ -+static int __init imq_init_devs(void) -+{ -+ struct net_device *dev; -+ int i,j; -+ j = numdevs; -+ -+ if (!numdevs || numdevs > IMQ_MAX_DEVS) { -+ printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n", -+ IMQ_MAX_DEVS); -+ return -EINVAL; -+ } -+ -+ imq_devs = kmalloc(sizeof(struct net_device) * numdevs, GFP_KERNEL); -+ if (!imq_devs) -+ return -ENOMEM; -+ memset(imq_devs, 0, sizeof(struct net_device) * numdevs); -+ -+ /* we start counting at zero */ -+ numdevs--; -+ -+ for (i = 0, dev = imq_devs; i <= numdevs; i++, dev++) { -+ SET_MODULE_OWNER(dev); -+ strcpy(dev->name, "imq%d"); -+ dev->init = imq_dev_init; -+ dev->uninit = imq_dev_uninit; -+ -+ if (register_netdev(dev) < 0) -+ goto err_register; -+ } -+ printk(KERN_INFO "IMQ starting with %u devices...\n", j); -+ return 0; -+ -+err_register: -+ for (; i; i--) -+ unregister_netdev(--dev); -+ kfree(imq_devs); -+ return -EIO; -+} -+ -+static void imq_cleanup_devs(void) -+{ -+ int i; -+ struct net_device *dev = imq_devs; -+ -+ for (i = 0; i <= numdevs; i++) -+ unregister_netdev(dev++); -+ -+ kfree(imq_devs); -+} -+ -+static int __init imq_init_module(void) -+{ -+ int err; -+ -+ if ((err = imq_init_devs())) { -+ printk(KERN_ERR "IMQ: Error trying imq_init_devs()\n"); -+ return err; -+ } -+ if ((err = imq_init_hooks())) { -+ printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n"); -+ imq_cleanup_devs(); -+ return err; -+ } -+ -+ printk(KERN_INFO "IMQ driver loaded successfully.\n"); -+ -+#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB) -+ printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n"); -+#else -+ printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n"); -+#endif -+#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB) -+ printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n"); -+#else -+ printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n"); -+#endif -+ -+ return 0; -+} -+ -+static void __exit imq_cleanup_module(void) -+{ -+ imq_unhook(); -+ imq_cleanup_devs(); -+ printk(KERN_INFO "IMQ driver unloaded successfully.\n"); -+} -+ -+ -+module_init(imq_init_module); -+module_exit(imq_cleanup_module); -+ -+module_param(numdevs, int, 0); -+MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will be created)"); -+MODULE_AUTHOR("http://www.linuximq.net"); -+MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information."); -+MODULE_LICENSE("GPL"); -diff -urN linux-2.6.19/drivers/net/Kconfig linux-2.6.19+imq/drivers/net/Kconfig ---- linux-2.6.19/drivers/net/Kconfig 2006-12-01 14:05:30.000000000 +1030 -+++ linux-2.6.19+imq/drivers/net/Kconfig 2006-12-05 23:03:52.000000000 +1030 -@@ -96,6 +96,129 @@ - To compile this driver as a module, choose M here: the module - will be called eql. If unsure, say N. - -+config IMQ -+ tristate "IMQ (intermediate queueing device) support" -+ depends on NETDEVICES && NETFILTER -+ ---help--- -+ The IMQ device(s) is used as placeholder for QoS queueing -+ disciplines. Every packet entering/leaving the IP stack can be -+ directed through the IMQ device where it's enqueued/dequeued to the -+ attached qdisc. This allows you to treat network devices as classes -+ and distribute bandwidth among them. Iptables is used to specify -+ through which IMQ device, if any, packets travel. -+ -+ More information at: http://www.linuximq.net/ -+ -+ To compile this driver as a module, choose M here: the module -+ will be called imq. If unsure, say N. -+ -+choice -+ prompt "IMQ behavior (PRE/POSTROUTING)" -+ depends on IMQ -+ default IMQ_BEHAVIOR_BA -+ help -+ -+ This settings defines how IMQ behaves in respect to its -+ hooking in PREROUTING and POSTROUTING. -+ -+ IMQ can work in any of the following ways: -+ -+ PREROUTING | POSTROUTING -+ -----------------|------------------- -+ #1 After NAT | After NAT -+ #2 After NAT | Before NAT -+ #3 Before NAT | After NAT -+ #4 Before NAT | Before NAT -+ -+ The default behavior is to hook before NAT on PREROUTING -+ and after NAT on POSTROUTING (#3). -+ -+ This settings are specially usefull when trying to use IMQ -+ to shape NATed clients. -+ -+ More information can be found at: www.linuximq.net -+ -+ If not sure leave the default settings alone. -+ -+config IMQ_BEHAVIOR_AA -+ bool "IMQ AA" -+ help -+ This settings defines how IMQ behaves in respect to its -+ hooking in PREROUTING and POSTROUTING. -+ -+ Choosing this option will make IMQ hook like this: -+ -+ PREROUTING: After NAT -+ POSTROUTING: After NAT -+ -+ More information can be found at: www.linuximq.net -+ -+ If not sure leave the default settings alone. -+ -+config IMQ_BEHAVIOR_AB -+ bool "IMQ AB" -+ help -+ This settings defines how IMQ behaves in respect to its -+ hooking in PREROUTING and POSTROUTING. -+ -+ Choosing this option will make IMQ hook like this: -+ -+ PREROUTING: After NAT -+ POSTROUTING: Before NAT -+ -+ More information can be found at: www.linuximq.net -+ -+ If not sure leave the default settings alone. -+ -+config IMQ_BEHAVIOR_BA -+ bool "IMQ BA" -+ help -+ This settings defines how IMQ behaves in respect to its -+ hooking in PREROUTING and POSTROUTING. -+ -+ Choosing this option will make IMQ hook like this: -+ -+ PREROUTING: Before NAT -+ POSTROUTING: After NAT -+ -+ More information can be found at: www.linuximq.net -+ -+ If not sure leave the default settings alone. -+ -+config IMQ_BEHAVIOR_BB -+ bool "IMQ BB" -+ help -+ This settings defines how IMQ behaves in respect to its -+ hooking in PREROUTING and POSTROUTING. -+ -+ Choosing this option will make IMQ hook like this: -+ -+ PREROUTING: Before NAT -+ POSTROUTING: Before NAT -+ -+ More information can be found at: www.linuximq.net -+ -+ If not sure leave the default settings alone. -+ -+endchoice -+ -+config IMQ_NUM_DEVS -+ -+ int "Number of IMQ devices" -+ range 2 8 -+ depends on IMQ -+ default "2" -+ help -+ -+ This settings defines how many IMQ devices will be -+ created. -+ -+ The default value is 2. -+ -+ More information can be found at: www.linuximq.net -+ -+ If not sure leave the default settings alone. -+ - config TUN - tristate "Universal TUN/TAP device driver support" - select CRC32 -diff -urN linux-2.6.19/drivers/net/Makefile linux-2.6.19+imq/drivers/net/Makefile ---- linux-2.6.19/drivers/net/Makefile 2006-12-01 14:05:30.000000000 +1030 -+++ linux-2.6.19+imq/drivers/net/Makefile 2006-12-04 12:41:01.000000000 +1030 -@@ -124,6 +124,7 @@ - obj-$(CONFIG_SLHC) += slhc.o - - obj-$(CONFIG_DUMMY) += dummy.o -+obj-$(CONFIG_IMQ) += imq.o - obj-$(CONFIG_IFB) += ifb.o - obj-$(CONFIG_DE600) += de600.o - obj-$(CONFIG_DE620) += de620.o -diff -urN linux-2.6.19/include/linux/imq.h linux-2.6.19+imq/include/linux/imq.h ---- linux-2.6.19/include/linux/imq.h 1970-01-01 09:30:00.000000000 +0930 -+++ linux-2.6.19+imq/include/linux/imq.h 2006-12-04 12:41:01.000000000 +1030 -@@ -0,0 +1,9 @@ -+#ifndef _IMQ_H -+#define _IMQ_H -+ -+#define IMQ_MAX_DEVS 16 -+ -+#define IMQ_F_IFMASK 0x7f -+#define IMQ_F_ENQUEUE 0x80 -+ -+#endif /* _IMQ_H */ -diff -urN linux-2.6.19/include/linux/netfilter_ipv4/ipt_IMQ.h linux-2.6.19+imq/include/linux/netfilter_ipv4/ipt_IMQ.h ---- linux-2.6.19/include/linux/netfilter_ipv4/ipt_IMQ.h 1970-01-01 09:30:00.000000000 +0930 -+++ linux-2.6.19+imq/include/linux/netfilter_ipv4/ipt_IMQ.h 2006-12-05 23:04:22.000000000 +1030 -@@ -0,0 +1,8 @@ -+#ifndef _IPT_IMQ_H -+#define _IPT_IMQ_H -+ -+struct ipt_imq_info { -+ unsigned int todev; /* target imq device */ -+}; -+ -+#endif /* _IPT_IMQ_H */ -diff -urN linux-2.6.19/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-2.6.19+imq/include/linux/netfilter_ipv6/ip6t_IMQ.h ---- linux-2.6.19/include/linux/netfilter_ipv6/ip6t_IMQ.h 1970-01-01 09:30:00.000000000 +0930 -+++ linux-2.6.19+imq/include/linux/netfilter_ipv6/ip6t_IMQ.h 2006-12-05 23:04:32.000000000 +1030 -@@ -0,0 +1,8 @@ -+#ifndef _IP6T_IMQ_H -+#define _IP6T_IMQ_H -+ -+struct ip6t_imq_info { -+ unsigned int todev; /* target imq device */ -+}; -+ -+#endif /* _IP6T_IMQ_H */ -diff -urN linux-2.6.19/include/linux/skbuff.h linux-2.6.19+imq/include/linux/skbuff.h ---- linux-2.6.19/include/linux/skbuff.h 2006-12-01 14:05:44.000000000 +1030 -+++ linux-2.6.19+imq/include/linux/skbuff.h 2006-12-05 23:05:06.000000000 +1030 -@@ -292,6 +292,10 @@ - #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) - struct sk_buff *nfct_reasm; - #endif -+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) -+ unsigned char imq_flags; -+ struct nf_info *nf_info; -+#endif - #ifdef CONFIG_BRIDGE_NETFILTER - struct nf_bridge_info *nf_bridge; - #endif -diff -urN linux-2.6.19/net/core/dev.c linux-2.6.19+imq/net/core/dev.c ---- linux-2.6.19/net/core/dev.c 2006-12-01 14:05:45.000000000 +1030 -+++ linux-2.6.19+imq/net/core/dev.c 2006-12-05 23:05:40.000000000 +1030 -@@ -94,6 +94,9 @@ - #include - #include - #include -+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) -+#include -+#endif - #include - #include - #include -@@ -1344,7 +1347,11 @@ - int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) - { - if (likely(!skb->next)) { -- if (netdev_nit) -+ if (netdev_nit -+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) -+ && !(skb->imq_flags & IMQ_F_ENQUEUE) -+#endif -+ ) - dev_queue_xmit_nit(skb, dev); - - if (netif_needs_gso(dev, skb)) { -diff -urN linux-2.6.19/net/core/skbuff.c linux-2.6.19+imq/net/core/skbuff.c ---- linux-2.6.19/net/core/skbuff.c 2006-12-01 14:05:45.000000000 +1030 -+++ linux-2.6.19+imq/net/core/skbuff.c 2006-12-04 12:41:01.000000000 +1030 -@@ -482,6 +482,10 @@ - C(nfct_reasm); - nf_conntrack_get_reasm(skb->nfct_reasm); - #endif -+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) -+ C(imq_flags); -+ C(nf_info); -+#endif /*CONFIG_IMQ*/ - #ifdef CONFIG_BRIDGE_NETFILTER - C(nf_bridge); - nf_bridge_get(skb->nf_bridge); -@@ -546,6 +550,10 @@ - #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE) - new->ipvs_property = old->ipvs_property; - #endif -+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) -+ new->imq_flags = old->imq_flags; -+ new->nf_info = old->nf_info; -+#endif /*CONFIG_IMQ*/ - #ifdef CONFIG_BRIDGE_NETFILTER - new->nf_bridge = old->nf_bridge; - nf_bridge_get(old->nf_bridge); -diff -urN linux-2.6.19/net/ipv4/netfilter/ipt_IMQ.c linux-2.6.19+imq/net/ipv4/netfilter/ipt_IMQ.c ---- linux-2.6.19/net/ipv4/netfilter/ipt_IMQ.c 1970-01-01 09:30:00.000000000 +0930 -+++ linux-2.6.19.2/net/ipv4/netfilter/ipt_IMQ.c 2007-01-25 09:59:34.000000000 +0100 -@@ -0,0 +1,71 @@ -+/* -+ * This target marks packets to be enqueued to an imq device -+ */ -+#include -+#include -+#include -+#include -+#include -+ -+static unsigned int imq_target(struct sk_buff **pskb, -+ const struct net_device *in, -+ const struct net_device *out, -+ unsigned int hooknum, -+ const struct xt_target *target, -+ const void *targinfo) -+{ -+ struct ipt_imq_info *mr = (struct ipt_imq_info*)targinfo; -+ -+ (*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE; -+ -+ return IPT_CONTINUE; -+} -+ -+static int imq_checkentry(const char *tablename, -+ const void *e, -+ const struct xt_target *target, -+ void *targinfo, -+ unsigned int hook_mask) -+{ -+ struct ipt_imq_info *mr; -+ -+ mr = (struct ipt_imq_info*)targinfo; -+ -+ if (mr->todev > IMQ_MAX_DEVS) { -+ printk(KERN_WARNING -+ "IMQ: invalid device specified, highest is %u\n", -+ IMQ_MAX_DEVS); -+ return 0; -+ } -+ -+ return 1; -+} -+ -+static struct ipt_target ipt_imq_reg = { -+ .name = "IMQ", -+ .target = imq_target, -+ .targetsize = sizeof(struct ipt_imq_info), -+ .checkentry = imq_checkentry, -+ .me = THIS_MODULE, -+ .table = "mangle" -+}; -+ -+static int __init init(void) -+{ -+ if (ipt_register_target(&ipt_imq_reg)) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+static void __exit fini(void) -+{ -+ ipt_unregister_target(&ipt_imq_reg); -+} -+ -+module_init(init); -+module_exit(fini); -+ -+MODULE_AUTHOR("http://www.linuximq.net"); -+MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information."); -+MODULE_LICENSE("GPL"); -diff -urN linux-2.6.19/net/ipv4/netfilter/Kconfig linux-2.6.19+imq/net/ipv4/netfilter/Kconfig ---- linux-2.6.19/net/ipv4/netfilter/Kconfig 2006-12-01 14:05:45.000000000 +1030 -+++ linux-2.6.19+imq/net/ipv4/netfilter/Kconfig 2006-12-04 12:41:01.000000000 +1030 -@@ -533,6 +533,17 @@ - - To compile it as a module, choose M here. If unsure, say N. - -+config IP_NF_TARGET_IMQ -+ tristate "IMQ target support" -+ depends on IP_NF_MANGLE -+ help -+ This option adds a `IMQ' target which is used to specify if and -+ to which IMQ device packets should get enqueued/dequeued. -+ -+ For more information visit: http://www.linuximq.net/ -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ - config IP_NF_TARGET_TOS - tristate "TOS target support" - depends on IP_NF_MANGLE -diff -urN linux-2.6.19/net/ipv4/netfilter/Makefile linux-2.6.19+imq/net/ipv4/netfilter/Makefile ---- linux-2.6.19/net/ipv4/netfilter/Makefile 2006-12-01 14:05:45.000000000 +1030 -+++ linux-2.6.19+imq/net/ipv4/netfilter/Makefile 2006-12-04 12:41:01.000000000 +1030 -@@ -67,6 +67,7 @@ - obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o - obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o - obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o -+obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o - obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o - obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o - obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o -diff -urN linux-2.6.19/net/ipv6/netfilter/ip6t_IMQ.c linux-2.6.19+imq/net/ipv6/netfilter/ip6t_IMQ.c ---- linux-2.6.19/net/ipv6/netfilter/ip6t_IMQ.c 1970-01-01 09:30:00.000000000 +0930 -+++ linux-2.6.19.2/net/ipv6/netfilter/ip6t_IMQ.c 2007-01-25 10:06:41.000000000 +0100 -@@ -0,0 +1,71 @@ -+/* -+ * This target marks packets to be enqueued to an imq device -+ */ -+#include -+#include -+#include -+#include -+#include -+ -+static unsigned int imq_target(struct sk_buff **pskb, -+ const struct net_device *in, -+ const struct net_device *out, -+ unsigned int hooknum, -+ const struct xt_target *target, -+ const void *targinfo) -+{ -+ struct ip6t_imq_info *mr = (struct ip6t_imq_info*)targinfo; -+ -+ (*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE; -+ -+ return IP6T_CONTINUE; -+} -+ -+static int imq_checkentry(const char *tablename, -+ const void *entry, -+ const struct xt_target *target, -+ void *targinfo, -+ unsigned int hook_mask) -+{ -+ struct ip6t_imq_info *mr; -+ -+ mr = (struct ip6t_imq_info*)targinfo; -+ -+ if (mr->todev > IMQ_MAX_DEVS) { -+ printk(KERN_WARNING -+ "IMQ: invalid device specified, highest is %u\n", -+ IMQ_MAX_DEVS); -+ return 0; -+ } -+ -+ return 1; -+} -+ -+static struct ip6t_target ip6t_imq_reg = { -+ .name = "IMQ", -+ .target = imq_target, -+ .targetsize = sizeof(struct ip6t_imq_info), -+ .table = "mangle", -+ .checkentry = imq_checkentry, -+ .me = THIS_MODULE -+}; -+ -+static int __init init(void) -+{ -+ if (ip6t_register_target(&ip6t_imq_reg)) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+static void __exit fini(void) -+{ -+ ip6t_unregister_target(&ip6t_imq_reg); -+} -+ -+module_init(init); -+module_exit(fini); -+ -+MODULE_AUTHOR("http://www.linuximq.net"); -+MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information."); -+MODULE_LICENSE("GPL"); -diff -urN linux-2.6.19/net/ipv6/netfilter/Kconfig linux-2.6.19+imq/net/ipv6/netfilter/Kconfig ---- linux-2.6.19/net/ipv6/netfilter/Kconfig 2006-12-01 14:05:46.000000000 +1030 -+++ linux-2.6.19+imq/net/ipv6/netfilter/Kconfig 2006-12-04 12:41:01.000000000 +1030 -@@ -163,6 +163,15 @@ - - To compile it as a module, choose M here. If unsure, say N. - -+config IP6_NF_TARGET_IMQ -+ tristate "IMQ target support" -+ depends on IP6_NF_MANGLE -+ help -+ This option adds a `IMQ' target which is used to specify if and -+ to which imq device packets should get enqueued/dequeued. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ - config IP6_NF_TARGET_HL - tristate 'HL (hoplimit) target support' - depends on IP6_NF_MANGLE -diff -urN linux-2.6.19/net/ipv6/netfilter/Makefile linux-2.6.19+imq/net/ipv6/netfilter/Makefile ---- linux-2.6.19/net/ipv6/netfilter/Makefile 2006-12-01 14:05:46.000000000 +1030 -+++ linux-2.6.19+imq/net/ipv6/netfilter/Makefile 2006-12-04 12:41:01.000000000 +1030 -@@ -13,6 +13,7 @@ - obj-$(CONFIG_IP6_NF_MATCH_OWNER) += ip6t_owner.o - obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o - obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o -+obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o - obj-$(CONFIG_IP6_NF_TARGET_HL) += ip6t_HL.o - obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o - obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o -diff -urN linux-2.6.19/net/sched/sch_generic.c linux-2.6.19+imq/net/sched/sch_generic.c ---- linux-2.6.19/net/sched/sch_generic.c 2006-12-01 14:05:46.000000000 +1030 -+++ linux-2.6.19+imq/net/sched/sch_generic.c 2006-12-05 23:08:54.000000000 +1030 -@@ -87,7 +87,6 @@ - - NOTE: Called under dev->queue_lock with locally disabled BH. - */ -- - static inline int qdisc_restart(struct net_device *dev) - { - struct Qdisc *q = dev->qdisc; -@@ -181,6 +180,11 @@ - return q->q.qlen; - } - -+int qdisc_restart1(struct net_device *dev) -+{ -+ return qdisc_restart(dev); -+} -+ - void __qdisc_run(struct net_device *dev) - { - if (unlikely(dev->qdisc == &noop_qdisc)) -@@ -617,3 +621,4 @@ - EXPORT_SYMBOL(qdisc_reset); - EXPORT_SYMBOL(qdisc_lock_tree); - EXPORT_SYMBOL(qdisc_unlock_tree); -+EXPORT_SYMBOL(qdisc_restart1); diff --git a/target/linux/etrax/patches/generic_2.6/160-netfilter_route.patch b/target/linux/etrax/patches/generic_2.6/160-netfilter_route.patch deleted file mode 100644 index 7e8491c3e3..0000000000 --- a/target/linux/etrax/patches/generic_2.6/160-netfilter_route.patch +++ /dev/null @@ -1,902 +0,0 @@ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ipt_ROUTE.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ipt_ROUTE.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ipt_ROUTE.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ipt_ROUTE.h 2006-12-14 03:13:49.000000000 +0100 -@@ -0,0 +1,23 @@ -+/* Header file for iptables ipt_ROUTE target -+ * -+ * (C) 2002 by Cédric de Launois -+ * -+ * This software is distributed under GNU GPL v2, 1991 -+ */ -+#ifndef _IPT_ROUTE_H_target -+#define _IPT_ROUTE_H_target -+ -+#define IPT_ROUTE_IFNAMSIZ 16 -+ -+struct ipt_route_target_info { -+ char oif[IPT_ROUTE_IFNAMSIZ]; /* Output Interface Name */ -+ char iif[IPT_ROUTE_IFNAMSIZ]; /* Input Interface Name */ -+ u_int32_t gw; /* IP address of gateway */ -+ u_int8_t flags; -+}; -+ -+/* Values for "flags" field */ -+#define IPT_ROUTE_CONTINUE 0x01 -+#define IPT_ROUTE_TEE 0x02 -+ -+#endif /*_IPT_ROUTE_H_target*/ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv6/ip6t_ROUTE.h linux-2.6.19.dev/include/linux/netfilter_ipv6/ip6t_ROUTE.h ---- linux-2.6.19.old/include/linux/netfilter_ipv6/ip6t_ROUTE.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv6/ip6t_ROUTE.h 2006-12-14 03:13:49.000000000 +0100 -@@ -0,0 +1,23 @@ -+/* Header file for iptables ip6t_ROUTE target -+ * -+ * (C) 2003 by Cédric de Launois -+ * -+ * This software is distributed under GNU GPL v2, 1991 -+ */ -+#ifndef _IPT_ROUTE_H_target -+#define _IPT_ROUTE_H_target -+ -+#define IP6T_ROUTE_IFNAMSIZ 16 -+ -+struct ip6t_route_target_info { -+ char oif[IP6T_ROUTE_IFNAMSIZ]; /* Output Interface Name */ -+ char iif[IP6T_ROUTE_IFNAMSIZ]; /* Input Interface Name */ -+ u_int32_t gw[4]; /* IPv6 address of gateway */ -+ u_int8_t flags; -+}; -+ -+/* Values for "flags" field */ -+#define IP6T_ROUTE_CONTINUE 0x01 -+#define IP6T_ROUTE_TEE 0x02 -+ -+#endif /*_IP6T_ROUTE_H_target*/ -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ipt_ROUTE.c linux-2.6.19.dev/net/ipv4/netfilter/ipt_ROUTE.c ---- linux-2.6.19.old/net/ipv4/netfilter/ipt_ROUTE.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ipt_ROUTE.c 2006-12-14 03:13:49.000000000 +0100 -@@ -0,0 +1,455 @@ -+/* -+ * This implements the ROUTE target, which enables you to setup unusual -+ * routes not supported by the standard kernel routing table. -+ * -+ * Copyright (C) 2002 Cedric de Launois -+ * -+ * v 1.11 2004/11/23 -+ * -+ * This software is distributed under GNU GPL v2, 1991 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if 0 -+#define DEBUGP printk -+#else -+#define DEBUGP(format, args...) -+#endif -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Cedric de Launois "); -+MODULE_DESCRIPTION("iptables ROUTE target module"); -+ -+/* Try to route the packet according to the routing keys specified in -+ * route_info. Keys are : -+ * - ifindex : -+ * 0 if no oif preferred, -+ * otherwise set to the index of the desired oif -+ * - route_info->gw : -+ * 0 if no gateway specified, -+ * otherwise set to the next host to which the pkt must be routed -+ * If success, skb->dev is the output device to which the packet must -+ * be sent and skb->dst is not NULL -+ * -+ * RETURN: -1 if an error occured -+ * 1 if the packet was succesfully routed to the -+ * destination desired -+ * 0 if the kernel routing table could not route the packet -+ * according to the keys specified -+ */ -+static int route(struct sk_buff *skb, -+ unsigned int ifindex, -+ const struct ipt_route_target_info *route_info) -+{ -+ int err; -+ struct rtable *rt; -+ struct iphdr *iph = skb->nh.iph; -+ struct flowi fl = { -+ .oif = ifindex, -+ .nl_u = { -+ .ip4_u = { -+ .daddr = iph->daddr, -+ .saddr = 0, -+ .tos = RT_TOS(iph->tos), -+ .scope = RT_SCOPE_UNIVERSE, -+ } -+ } -+ }; -+ -+ /* The destination address may be overloaded by the target */ -+ if (route_info->gw) -+ fl.fl4_dst = route_info->gw; -+ -+ /* Trying to route the packet using the standard routing table. */ -+ if ((err = ip_route_output_key(&rt, &fl))) { -+ if (net_ratelimit()) -+ DEBUGP("ipt_ROUTE: couldn't route pkt (err: %i)",err); -+ return -1; -+ } -+ -+ /* Drop old route. */ -+ dst_release(skb->dst); -+ skb->dst = NULL; -+ -+ /* Success if no oif specified or if the oif correspond to the -+ * one desired */ -+ if (!ifindex || rt->u.dst.dev->ifindex == ifindex) { -+ skb->dst = &rt->u.dst; -+ skb->dev = skb->dst->dev; -+ skb->protocol = htons(ETH_P_IP); -+ return 1; -+ } -+ -+ /* The interface selected by the routing table is not the one -+ * specified by the user. This may happen because the dst address -+ * is one of our own addresses. -+ */ -+ if (net_ratelimit()) -+ DEBUGP("ipt_ROUTE: failed to route as desired gw=%u.%u.%u.%u oif=%i (got oif=%i)\n", -+ NIPQUAD(route_info->gw), ifindex, rt->u.dst.dev->ifindex); -+ -+ return 0; -+} -+ -+ -+/* Stolen from ip_finish_output2 -+ * PRE : skb->dev is set to the device we are leaving by -+ * skb->dst is not NULL -+ * POST: the packet is sent with the link layer header pushed -+ * the packet is destroyed -+ */ -+static void ip_direct_send(struct sk_buff *skb) -+{ -+ struct dst_entry *dst = skb->dst; -+ struct hh_cache *hh = dst->hh; -+ struct net_device *dev = dst->dev; -+ int hh_len = LL_RESERVED_SPACE(dev); -+ -+ /* Be paranoid, rather than too clever. */ -+ if (unlikely(skb_headroom(skb) < hh_len && dev->hard_header)) { -+ struct sk_buff *skb2; -+ -+ skb2 = skb_realloc_headroom(skb, LL_RESERVED_SPACE(dev)); -+ if (skb2 == NULL) { -+ kfree_skb(skb); -+ return; -+ } -+ if (skb->sk) -+ skb_set_owner_w(skb2, skb->sk); -+ kfree_skb(skb); -+ skb = skb2; -+ } -+ -+ if (hh) { -+ int hh_alen; -+ -+ read_lock_bh(&hh->hh_lock); -+ hh_alen = HH_DATA_ALIGN(hh->hh_len); -+ memcpy(skb->data - hh_alen, hh->hh_data, hh_alen); -+ read_unlock_bh(&hh->hh_lock); -+ skb_push(skb, hh->hh_len); -+ hh->hh_output(skb); -+ } else if (dst->neighbour) -+ dst->neighbour->output(skb); -+ else { -+ if (net_ratelimit()) -+ DEBUGP(KERN_DEBUG "ipt_ROUTE: no hdr & no neighbour cache!\n"); -+ kfree_skb(skb); -+ } -+} -+ -+ -+/* PRE : skb->dev is set to the device we are leaving by -+ * POST: - the packet is directly sent to the skb->dev device, without -+ * pushing the link layer header. -+ * - the packet is destroyed -+ */ -+static inline int dev_direct_send(struct sk_buff *skb) -+{ -+ return dev_queue_xmit(skb); -+} -+ -+ -+static unsigned int route_oif(const struct ipt_route_target_info *route_info, -+ struct sk_buff *skb) -+{ -+ unsigned int ifindex = 0; -+ struct net_device *dev_out = NULL; -+ -+ /* The user set the interface name to use. -+ * Getting the current interface index. -+ */ -+ if ((dev_out = dev_get_by_name(route_info->oif))) { -+ ifindex = dev_out->ifindex; -+ } else { -+ /* Unknown interface name : packet dropped */ -+ if (net_ratelimit()) -+ DEBUGP("ipt_ROUTE: oif interface %s not found\n", route_info->oif); -+ return NF_DROP; -+ } -+ -+ /* Trying the standard way of routing packets */ -+ switch (route(skb, ifindex, route_info)) { -+ case 1: -+ dev_put(dev_out); -+ if (route_info->flags & IPT_ROUTE_CONTINUE) -+ return IPT_CONTINUE; -+ -+ ip_direct_send(skb); -+ return NF_STOLEN; -+ -+ case 0: -+ /* Failed to send to oif. Trying the hard way */ -+ if (route_info->flags & IPT_ROUTE_CONTINUE) -+ return NF_DROP; -+ -+ if (net_ratelimit()) -+ DEBUGP("ipt_ROUTE: forcing the use of %i\n", -+ ifindex); -+ -+ /* We have to force the use of an interface. -+ * This interface must be a tunnel interface since -+ * otherwise we can't guess the hw address for -+ * the packet. For a tunnel interface, no hw address -+ * is needed. -+ */ -+ if ((dev_out->type != ARPHRD_TUNNEL) -+ && (dev_out->type != ARPHRD_IPGRE)) { -+ if (net_ratelimit()) -+ DEBUGP("ipt_ROUTE: can't guess the hw addr !\n"); -+ dev_put(dev_out); -+ return NF_DROP; -+ } -+ -+ /* Send the packet. This will also free skb -+ * Do not go through the POST_ROUTING hook because -+ * skb->dst is not set and because it will probably -+ * get confused by the destination IP address. -+ */ -+ skb->dev = dev_out; -+ dev_direct_send(skb); -+ dev_put(dev_out); -+ return NF_STOLEN; -+ -+ default: -+ /* Unexpected error */ -+ dev_put(dev_out); -+ return NF_DROP; -+ } -+} -+ -+ -+static unsigned int route_iif(const struct ipt_route_target_info *route_info, -+ struct sk_buff *skb) -+{ -+ struct net_device *dev_in = NULL; -+ -+ /* Getting the current interface index. */ -+ if (!(dev_in = dev_get_by_name(route_info->iif))) { -+ if (net_ratelimit()) -+ DEBUGP("ipt_ROUTE: iif interface %s not found\n", route_info->iif); -+ return NF_DROP; -+ } -+ -+ skb->dev = dev_in; -+ dst_release(skb->dst); -+ skb->dst = NULL; -+ -+ netif_rx(skb); -+ dev_put(dev_in); -+ return NF_STOLEN; -+} -+ -+ -+static unsigned int route_gw(const struct ipt_route_target_info *route_info, -+ struct sk_buff *skb) -+{ -+ if (route(skb, 0, route_info)!=1) -+ return NF_DROP; -+ -+ if (route_info->flags & IPT_ROUTE_CONTINUE) -+ return IPT_CONTINUE; -+ -+ ip_direct_send(skb); -+ return NF_STOLEN; -+} -+ -+ -+/* To detect and deter routed packet loopback when using the --tee option, -+ * we take a page out of the raw.patch book: on the copied skb, we set up -+ * a fake ->nfct entry, pointing to the local &route_tee_track. We skip -+ * routing packets when we see they already have that ->nfct. -+ */ -+ -+static struct ip_conntrack route_tee_track; -+ -+static unsigned int ipt_route_target(struct sk_buff **pskb, -+ const struct net_device *in, -+ const struct net_device *out, -+ unsigned int hooknum, -+ const struct xt_target *target, -+ const void *targinfo) -+{ -+ const struct ipt_route_target_info *route_info = targinfo; -+ struct sk_buff *skb = *pskb; -+ unsigned int res; -+ -+ if (skb->nfct == &route_tee_track.ct_general) { -+ /* Loopback - a packet we already routed, is to be -+ * routed another time. Avoid that, now. -+ */ -+ if (net_ratelimit()) -+ DEBUGP(KERN_DEBUG "ipt_ROUTE: loopback - DROP!\n"); -+ return NF_DROP; -+ } -+ -+ /* If we are at PREROUTING or INPUT hook -+ * the TTL isn't decreased by the IP stack -+ */ -+ if (hooknum == NF_IP_PRE_ROUTING || -+ hooknum == NF_IP_LOCAL_IN) { -+ -+ struct iphdr *iph = skb->nh.iph; -+ -+ if (iph->ttl <= 1) { -+ struct rtable *rt; -+ struct flowi fl = { -+ .oif = 0, -+ .nl_u = { -+ .ip4_u = { -+ .daddr = iph->daddr, -+ .saddr = iph->saddr, -+ .tos = RT_TOS(iph->tos), -+ .scope = ((iph->tos & RTO_ONLINK) ? -+ RT_SCOPE_LINK : -+ RT_SCOPE_UNIVERSE) -+ } -+ } -+ }; -+ -+ if (ip_route_output_key(&rt, &fl)) { -+ return NF_DROP; -+ } -+ -+ if (skb->dev == rt->u.dst.dev) { -+ /* Drop old route. */ -+ dst_release(skb->dst); -+ skb->dst = &rt->u.dst; -+ -+ /* this will traverse normal stack, and -+ * thus call conntrack on the icmp packet */ -+ icmp_send(skb, ICMP_TIME_EXCEEDED, -+ ICMP_EXC_TTL, 0); -+ } -+ -+ return NF_DROP; -+ } -+ -+ /* -+ * If we are at INPUT the checksum must be recalculated since -+ * the length could change as the result of a defragmentation. -+ */ -+ if(hooknum == NF_IP_LOCAL_IN) { -+ iph->ttl = iph->ttl - 1; -+ iph->check = 0; -+ iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); -+ } else { -+ ip_decrease_ttl(iph); -+ } -+ } -+ -+ if ((route_info->flags & IPT_ROUTE_TEE)) { -+ /* -+ * Copy the *pskb, and route the copy. Will later return -+ * IPT_CONTINUE for the original skb, which should continue -+ * on its way as if nothing happened. The copy should be -+ * independantly delivered to the ROUTE --gw. -+ */ -+ skb = skb_copy(*pskb, GFP_ATOMIC); -+ if (!skb) { -+ if (net_ratelimit()) -+ DEBUGP(KERN_DEBUG "ipt_ROUTE: copy failed!\n"); -+ return IPT_CONTINUE; -+ } -+ } -+ -+ /* Tell conntrack to forget this packet since it may get confused -+ * when a packet is leaving with dst address == our address. -+ * Good idea ? Dunno. Need advice. -+ * -+ * NEW: mark the skb with our &route_tee_track, so we avoid looping -+ * on any already routed packet. -+ */ -+ if (!(route_info->flags & IPT_ROUTE_CONTINUE)) { -+ nf_conntrack_put(skb->nfct); -+ skb->nfct = &route_tee_track.ct_general; -+ skb->nfctinfo = IP_CT_NEW; -+ nf_conntrack_get(skb->nfct); -+ } -+ -+ if (route_info->oif[0] != '\0') { -+ res = route_oif(route_info, skb); -+ } else if (route_info->iif[0] != '\0') { -+ res = route_iif(route_info, skb); -+ } else if (route_info->gw) { -+ res = route_gw(route_info, skb); -+ } else { -+ if (net_ratelimit()) -+ DEBUGP(KERN_DEBUG "ipt_ROUTE: no parameter !\n"); -+ res = IPT_CONTINUE; -+ } -+ -+ if ((route_info->flags & IPT_ROUTE_TEE)) -+ res = IPT_CONTINUE; -+ -+ return res; -+} -+ -+ -+static int ipt_route_checkentry(const char *tablename, -+ const void *e, -+ const struct xt_target *target, -+ void *targinfo, -+ unsigned int hook_mask) -+{ -+ if (strcmp(tablename, "mangle") != 0) { -+ printk("ipt_ROUTE: bad table `%s', use the `mangle' table.\n", -+ tablename); -+ return 0; -+ } -+ -+ if (hook_mask & ~( (1 << NF_IP_PRE_ROUTING) -+ | (1 << NF_IP_LOCAL_IN) -+ | (1 << NF_IP_FORWARD) -+ | (1 << NF_IP_LOCAL_OUT) -+ | (1 << NF_IP_POST_ROUTING))) { -+ printk("ipt_ROUTE: bad hook\n"); -+ return 0; -+ } -+ -+ return 1; -+} -+ -+ -+static struct ipt_target ipt_route_reg = { -+ .name = "ROUTE", -+ .target = ipt_route_target, -+ .targetsize = sizeof(struct ipt_route_target_info), -+ .checkentry = ipt_route_checkentry, -+ .me = THIS_MODULE, -+}; -+ -+static int __init init(void) -+{ -+ /* Set up fake conntrack (stolen from raw.patch): -+ - to never be deleted, not in any hashes */ -+ atomic_set(&route_tee_track.ct_general.use, 1); -+ /* - and look it like as a confirmed connection */ -+ set_bit(IPS_CONFIRMED_BIT, &route_tee_track.status); -+ /* Initialize fake conntrack so that NAT will skip it */ -+ route_tee_track.status |= IPS_NAT_DONE_MASK; -+ -+ return ipt_register_target(&ipt_route_reg); -+} -+ -+ -+static void __exit fini(void) -+{ -+ ipt_unregister_target(&ipt_route_reg); -+} -+ -+module_init(init); -+module_exit(fini); -diff -urN linux-2.6.19.old/net/ipv4/netfilter/Kconfig linux-2.6.19.dev/net/ipv4/netfilter/Kconfig ---- linux-2.6.19.old/net/ipv4/netfilter/Kconfig 2006-12-14 03:13:49.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/Kconfig 2006-12-14 03:13:49.000000000 +0100 -@@ -494,6 +494,23 @@ - - To compile it as a module, choose M here. If unsure, say N. - -+config IP_NF_TARGET_ROUTE -+ tristate 'ROUTE target support' -+ depends on IP_NF_MANGLE -+ help -+ This option adds a `ROUTE' target, which enables you to setup unusual -+ routes. For example, the ROUTE lets you route a received packet through -+ an interface or towards a host, even if the regular destination of the -+ packet is the router itself. The ROUTE target is also able to change the -+ incoming interface of a packet. -+ -+ The target can be or not a final target. It has to be used inside the -+ mangle table. -+ -+ If you want to compile it as a module, say M here and read -+ Documentation/modules.txt. The module will be called ipt_ROUTE.o. -+ If unsure, say `N'. -+ - config IP_NF_TARGET_NETMAP - tristate "NETMAP target support" - depends on IP_NF_NAT -diff -urN linux-2.6.19.old/net/ipv4/netfilter/Makefile linux-2.6.19.dev/net/ipv4/netfilter/Makefile ---- linux-2.6.19.old/net/ipv4/netfilter/Makefile 2006-12-14 03:13:49.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/Makefile 2006-12-14 03:13:49.000000000 +0100 -@@ -74,6 +74,7 @@ - obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o - obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o - obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o -+obj-$(CONFIG_IP_NF_TARGET_ROUTE) += ipt_ROUTE.o - obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o - obj-$(CONFIG_IP_NF_TARGET_SAME) += ipt_SAME.o - obj-$(CONFIG_IP_NF_NAT_SNMP_BASIC) += ip_nat_snmp_basic.o -diff -urN linux-2.6.19.old/net/ipv6/ipv6_syms.c linux-2.6.19.dev/net/ipv6/ipv6_syms.c ---- linux-2.6.19.old/net/ipv6/ipv6_syms.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv6/ipv6_syms.c 2006-12-14 03:13:49.000000000 +0100 -@@ -11,6 +11,7 @@ - EXPORT_SYMBOL(icmpv6_statistics); - EXPORT_SYMBOL(icmpv6_err_convert); - EXPORT_SYMBOL(ndisc_mc_map); -+EXPORT_SYMBOL(nd_tbl); - EXPORT_SYMBOL(register_inet6addr_notifier); - EXPORT_SYMBOL(unregister_inet6addr_notifier); - EXPORT_SYMBOL(ip6_route_output); -diff -urN linux-2.6.19.old/net/ipv6/netfilter/ip6t_ROUTE.c linux-2.6.19.dev/net/ipv6/netfilter/ip6t_ROUTE.c ---- linux-2.6.19.old/net/ipv6/netfilter/ip6t_ROUTE.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv6/netfilter/ip6t_ROUTE.c 2006-12-14 03:13:49.000000000 +0100 -@@ -0,0 +1,302 @@ -+/* -+ * This implements the ROUTE v6 target, which enables you to setup unusual -+ * routes not supported by the standard kernel routing table. -+ * -+ * Copyright (C) 2003 Cedric de Launois -+ * -+ * v 1.1 2004/11/23 -+ * -+ * This software is distributed under GNU GPL v2, 1991 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if 1 -+#define DEBUGP printk -+#else -+#define DEBUGP(format, args...) -+#endif -+ -+#define NIP6(addr) \ -+ ntohs((addr).s6_addr16[0]), \ -+ ntohs((addr).s6_addr16[1]), \ -+ ntohs((addr).s6_addr16[2]), \ -+ ntohs((addr).s6_addr16[3]), \ -+ ntohs((addr).s6_addr16[4]), \ -+ ntohs((addr).s6_addr16[5]), \ -+ ntohs((addr).s6_addr16[6]), \ -+ ntohs((addr).s6_addr16[7]) -+ -+/* Route the packet according to the routing keys specified in -+ * route_info. Keys are : -+ * - ifindex : -+ * 0 if no oif preferred, -+ * otherwise set to the index of the desired oif -+ * - route_info->gw : -+ * 0 if no gateway specified, -+ * otherwise set to the next host to which the pkt must be routed -+ * If success, skb->dev is the output device to which the packet must -+ * be sent and skb->dst is not NULL -+ * -+ * RETURN: 1 if the packet was succesfully routed to the -+ * destination desired -+ * 0 if the kernel routing table could not route the packet -+ * according to the keys specified -+ */ -+static int -+route6(struct sk_buff *skb, -+ unsigned int ifindex, -+ const struct ip6t_route_target_info *route_info) -+{ -+ struct rt6_info *rt = NULL; -+ struct ipv6hdr *ipv6h = skb->nh.ipv6h; -+ struct in6_addr *gw = (struct in6_addr*)&route_info->gw; -+ -+ DEBUGP("ip6t_ROUTE: called with: "); -+ DEBUGP("DST=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x ", NIP6(ipv6h->daddr)); -+ DEBUGP("GATEWAY=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x ", NIP6(*gw)); -+ DEBUGP("OUT=%s\n", route_info->oif); -+ -+ if (ipv6_addr_any(gw)) -+ rt = rt6_lookup(&ipv6h->daddr, &ipv6h->saddr, ifindex, 1); -+ else -+ rt = rt6_lookup(gw, &ipv6h->saddr, ifindex, 1); -+ -+ if (!rt) -+ goto no_route; -+ -+ DEBUGP("ip6t_ROUTE: routing gives: "); -+ DEBUGP("DST=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x ", NIP6(rt->rt6i_dst.addr)); -+ DEBUGP("GATEWAY=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x ", NIP6(rt->rt6i_gateway)); -+ DEBUGP("OUT=%s\n", rt->rt6i_dev->name); -+ -+ if (ifindex && rt->rt6i_dev->ifindex!=ifindex) -+ goto wrong_route; -+ -+ if (!rt->rt6i_nexthop) { -+ DEBUGP("ip6t_ROUTE: discovering neighbour\n"); -+ rt->rt6i_nexthop = ndisc_get_neigh(rt->rt6i_dev, &rt->rt6i_dst.addr); -+ } -+ -+ /* Drop old route. */ -+ dst_release(skb->dst); -+ skb->dst = &rt->u.dst; -+ skb->dev = rt->rt6i_dev; -+ return 1; -+ -+ wrong_route: -+ dst_release(&rt->u.dst); -+ no_route: -+ if (!net_ratelimit()) -+ return 0; -+ -+ printk("ip6t_ROUTE: no explicit route found "); -+ if (ifindex) -+ printk("via interface %s ", route_info->oif); -+ if (!ipv6_addr_any(gw)) -+ printk("via gateway %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x", NIP6(*gw)); -+ printk("\n"); -+ return 0; -+} -+ -+ -+/* Stolen from ip6_output_finish -+ * PRE : skb->dev is set to the device we are leaving by -+ * skb->dst is not NULL -+ * POST: the packet is sent with the link layer header pushed -+ * the packet is destroyed -+ */ -+static void ip_direct_send(struct sk_buff *skb) -+{ -+ struct dst_entry *dst = skb->dst; -+ struct hh_cache *hh = dst->hh; -+ -+ if (hh) { -+ read_lock_bh(&hh->hh_lock); -+ memcpy(skb->data - 16, hh->hh_data, 16); -+ read_unlock_bh(&hh->hh_lock); -+ skb_push(skb, hh->hh_len); -+ hh->hh_output(skb); -+ } else if (dst->neighbour) -+ dst->neighbour->output(skb); -+ else { -+ if (net_ratelimit()) -+ DEBUGP(KERN_DEBUG "ip6t_ROUTE: no hdr & no neighbour cache!\n"); -+ kfree_skb(skb); -+ } -+} -+ -+ -+static unsigned int -+route6_oif(const struct ip6t_route_target_info *route_info, -+ struct sk_buff *skb) -+{ -+ unsigned int ifindex = 0; -+ struct net_device *dev_out = NULL; -+ -+ /* The user set the interface name to use. -+ * Getting the current interface index. -+ */ -+ if ((dev_out = dev_get_by_name(route_info->oif))) { -+ ifindex = dev_out->ifindex; -+ } else { -+ /* Unknown interface name : packet dropped */ -+ if (net_ratelimit()) -+ DEBUGP("ip6t_ROUTE: oif interface %s not found\n", route_info->oif); -+ -+ if (route_info->flags & IP6T_ROUTE_CONTINUE) -+ return IP6T_CONTINUE; -+ else -+ return NF_DROP; -+ } -+ -+ /* Trying the standard way of routing packets */ -+ if (route6(skb, ifindex, route_info)) { -+ dev_put(dev_out); -+ if (route_info->flags & IP6T_ROUTE_CONTINUE) -+ return IP6T_CONTINUE; -+ -+ ip_direct_send(skb); -+ return NF_STOLEN; -+ } else -+ return NF_DROP; -+} -+ -+ -+static unsigned int -+route6_gw(const struct ip6t_route_target_info *route_info, -+ struct sk_buff *skb) -+{ -+ if (route6(skb, 0, route_info)) { -+ if (route_info->flags & IP6T_ROUTE_CONTINUE) -+ return IP6T_CONTINUE; -+ -+ ip_direct_send(skb); -+ return NF_STOLEN; -+ } else -+ return NF_DROP; -+} -+ -+ -+static unsigned int -+ip6t_route_target(struct sk_buff **pskb, -+ const struct net_device *in, -+ const struct net_device *out, -+ unsigned int hooknum, -+ const struct xt_target *target, -+ const void *targinfo) -+{ -+ const struct ip6t_route_target_info *route_info = targinfo; -+ struct sk_buff *skb = *pskb; -+ struct in6_addr *gw = (struct in6_addr*)&route_info->gw; -+ unsigned int res; -+ -+ if (route_info->flags & IP6T_ROUTE_CONTINUE) -+ goto do_it; -+ -+ /* If we are at PREROUTING or INPUT hook -+ * the TTL isn't decreased by the IP stack -+ */ -+ if (hooknum == NF_IP6_PRE_ROUTING || -+ hooknum == NF_IP6_LOCAL_IN) { -+ -+ struct ipv6hdr *ipv6h = skb->nh.ipv6h; -+ -+ if (ipv6h->hop_limit <= 1) { -+ /* Force OUTPUT device used as source address */ -+ skb->dev = skb->dst->dev; -+ -+ icmpv6_send(skb, ICMPV6_TIME_EXCEED, -+ ICMPV6_EXC_HOPLIMIT, 0, skb->dev); -+ -+ return NF_DROP; -+ } -+ -+ ipv6h->hop_limit--; -+ } -+ -+ if ((route_info->flags & IP6T_ROUTE_TEE)) { -+ /* -+ * Copy the *pskb, and route the copy. Will later return -+ * IP6T_CONTINUE for the original skb, which should continue -+ * on its way as if nothing happened. The copy should be -+ * independantly delivered to the ROUTE --gw. -+ */ -+ skb = skb_copy(*pskb, GFP_ATOMIC); -+ if (!skb) { -+ if (net_ratelimit()) -+ DEBUGP(KERN_DEBUG "ip6t_ROUTE: copy failed!\n"); -+ return IP6T_CONTINUE; -+ } -+ } -+ -+do_it: -+ if (route_info->oif[0]) { -+ res = route6_oif(route_info, skb); -+ } else if (!ipv6_addr_any(gw)) { -+ res = route6_gw(route_info, skb); -+ } else { -+ if (net_ratelimit()) -+ DEBUGP(KERN_DEBUG "ip6t_ROUTE: no parameter !\n"); -+ res = IP6T_CONTINUE; -+ } -+ -+ if ((route_info->flags & IP6T_ROUTE_TEE)) -+ res = IP6T_CONTINUE; -+ -+ return res; -+} -+ -+ -+static int -+ip6t_route_checkentry(const char *tablename, -+ const void *e, -+ const struct xt_target *target, -+ void *targinfo, -+ unsigned int hook_mask) -+{ -+ if (strcmp(tablename, "mangle") != 0) { -+ printk("ip6t_ROUTE: can only be called from \"mangle\" table.\n"); -+ return 0; -+ } -+ -+ return 1; -+} -+ -+ -+static struct ip6t_target ip6t_route_reg = { -+ .name = "ROUTE", -+ .target = ip6t_route_target, -+ .targetsize = sizeof(struct ip6t_route_target_info), -+ .checkentry = ip6t_route_checkentry, -+ .me = THIS_MODULE -+}; -+ -+ -+static int __init init(void) -+{ -+ printk(KERN_DEBUG "registering ipv6 ROUTE target\n"); -+ if (ip6t_register_target(&ip6t_route_reg)) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+ -+static void __exit fini(void) -+{ -+ ip6t_unregister_target(&ip6t_route_reg); -+} -+ -+module_init(init); -+module_exit(fini); -+MODULE_LICENSE("GPL"); -diff -urN linux-2.6.19.old/net/ipv6/netfilter/Kconfig linux-2.6.19.dev/net/ipv6/netfilter/Kconfig ---- linux-2.6.19.old/net/ipv6/netfilter/Kconfig 2006-12-14 03:13:49.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv6/netfilter/Kconfig 2006-12-14 03:13:49.000000000 +0100 -@@ -162,6 +162,19 @@ - - To compile it as a module, choose M here. If unsure, say N. - -+config IP6_NF_TARGET_ROUTE -+ tristate "ROUTE target support" -+ depends on IP6_NF_MANGLE -+ help -+ This option adds a `ROUTE' target, which enables you to setup unusual -+ routes. The ROUTE target is also able to change the incoming interface -+ of a packet. -+ -+ The target can be or not a final target. It has to be used inside the -+ mangle table. -+ -+ Not working as a module. -+ - config IP6_NF_MANGLE - tristate "Packet mangling" - depends on IP6_NF_IPTABLES -diff -urN linux-2.6.19.old/net/ipv6/netfilter/Makefile linux-2.6.19.dev/net/ipv6/netfilter/Makefile ---- linux-2.6.19.old/net/ipv6/netfilter/Makefile 2006-12-14 03:13:49.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv6/netfilter/Makefile 2006-12-14 03:13:49.000000000 +0100 -@@ -20,6 +20,7 @@ - obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o - obj-$(CONFIG_IP6_NF_MATCH_HL) += ip6t_hl.o - obj-$(CONFIG_IP6_NF_TARGET_REJECT) += ip6t_REJECT.o -+obj-$(CONFIG_IP6_NF_TARGET_ROUTE) += ip6t_ROUTE.o - - # objects for l3 independent conntrack - nf_conntrack_ipv6-objs := nf_conntrack_l3proto_ipv6.o nf_conntrack_proto_icmpv6.o nf_conntrack_reasm.o diff --git a/target/linux/etrax/patches/generic_2.6/170-netfilter_chaostables.patch b/target/linux/etrax/patches/generic_2.6/170-netfilter_chaostables.patch deleted file mode 100644 index 46d48a5d08..0000000000 --- a/target/linux/etrax/patches/generic_2.6/170-netfilter_chaostables.patch +++ /dev/null @@ -1,880 +0,0 @@ -diff -ruN linux-2.6.19.1.orig/include/linux/netfilter/xt_CHAOS.h linux-2.6.19.1/include/linux/netfilter/xt_CHAOS.h ---- linux-2.6.19.1.orig/include/linux/netfilter/xt_CHAOS.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.1/include/linux/netfilter/xt_CHAOS.h 2007-01-11 13:28:07.656144799 +0100 -@@ -0,0 +1,14 @@ -+#ifndef _LINUX_XT_CHAOS_H -+#define _LINUX_XT_CHAOS_H 1 -+ -+enum xt_chaos_variant { -+ XTCHAOS_NORMAL, -+ XTCHAOS_TARPIT, -+ XTCHAOS_DELUDE, -+}; -+ -+struct xt_chaos_info { -+ enum xt_chaos_variant variant; -+}; -+ -+#endif /* _LINUX_XT_CHAOS_H */ -diff -ruN linux-2.6.19.1.orig/include/linux/netfilter/xt_portscan.h linux-2.6.19.1/include/linux/netfilter/xt_portscan.h ---- linux-2.6.19.1.orig/include/linux/netfilter/xt_portscan.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.1/include/linux/netfilter/xt_portscan.h 2007-01-11 13:28:07.656144799 +0100 -@@ -0,0 +1,8 @@ -+#ifndef _LINUX_XT_PORTSCAN_H -+#define _LINUX_XT_PORTSCAN_H 1 -+ -+struct xt_portscan_info { -+ unsigned int match_stealth, match_syn, match_cn, match_gr; -+}; -+ -+#endif /* _LINUX_XT_PORTSCAN_H */ -diff -ruN linux-2.6.19.1.orig/net/netfilter/find_match.c linux-2.6.19.1/net/netfilter/find_match.c ---- linux-2.6.19.1.orig/net/netfilter/find_match.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.1/net/netfilter/find_match.c 2007-01-11 13:28:12.191994379 +0100 -@@ -0,0 +1,37 @@ -+/* -+ xt_request_find_match -+ by Jan Engelhardt , 2006 - 2007 -+ -+ Based upon linux-2.6.18.5/net/netfilter/x_tables.c: -+ Copyright (C) 2006-2006 Harald Welte -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License version 2 as -+ published by the Free Software Foundation. -+*/ -+ -+#include -+#include -+#include -+#include -+ -+/* -+ * Yeah this code is sub-optimal, but the function is missing in -+ * mainline so far. -jengelh -+ */ -+static struct xt_match *xt_request_find_match(int af, const char *name, -+ u8 revision) -+{ -+ static const char *const xt_prefix[] = { -+ [AF_INET] = "ip", -+ [AF_INET6] = "ip6", -+ [NF_ARP] = "arp", -+ }; -+ struct xt_match *match; -+ -+ match = try_then_request_module(xt_find_match(af, name, revision), -+ "%st_%s", xt_prefix[af], name); -+ if(IS_ERR(match) || match == NULL) -+ return NULL; -+ -+ return match; -+} -diff -ruN linux-2.6.19.1.orig/net/netfilter/Kconfig linux-2.6.19.1/net/netfilter/Kconfig ---- linux-2.6.19.1.orig/net/netfilter/Kconfig 2007-01-11 13:27:24.445577700 +0100 -+++ linux-2.6.19.1/net/netfilter/Kconfig 2007-01-11 13:28:09.092097179 +0100 -@@ -122,6 +122,14 @@ - - # alphabetically ordered list of targets - -+config NETFILTER_XT_TARGET_CHAOS -+ tristate '"CHAOS" target support' -+ depends on NETFILTER_XTABLES -+ help -+ This option adds a `CHAOS' target. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ - config NETFILTER_XT_TARGET_CLASSIFY - tristate '"CLASSIFY" target support' - depends on NETFILTER_XTABLES -@@ -148,6 +156,14 @@ - . The module will be called - ipt_CONNMARK.o. If unsure, say `N'. - -+config NETFILTER_XT_TARGET_DELUDE -+ tristate '"DELUDE" target support' -+ depends on NETFILTER_XTABLES -+ help -+ This option adds a `DELUDE' target. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ - config NETFILTER_XT_TARGET_DSCP - tristate '"DSCP" target support' - depends on NETFILTER_XTABLES -@@ -355,6 +371,14 @@ - - To compile it as a module, choose M here. If unsure, say N. - -+config NETFILTER_XT_MATCH_PORTSCAN -+ tristate '"portscan" match support' -+ depends on NETFILTER_XTABLES -+ help -+ This option adds a 'portscan' match support. -+ -+ To compile it as a module, choose M here. If unsure, say N. -+ - config NETFILTER_XT_MATCH_MULTIPORT - tristate "Multiple port match support" - depends on NETFILTER_XTABLES -diff -ruN linux-2.6.19.1.orig/net/netfilter/Makefile linux-2.6.19.1/net/netfilter/Makefile ---- linux-2.6.19.1.orig/net/netfilter/Makefile 2007-01-11 13:27:24.445577700 +0100 -+++ linux-2.6.19.1/net/netfilter/Makefile 2007-01-11 13:28:07.656144799 +0100 -@@ -23,8 +23,10 @@ - obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o - - # targets -+obj-$(CONFIG_NETFILTER_XT_TARGET_CHAOS) += xt_CHAOS.o - obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIFY) += xt_CLASSIFY.o - obj-$(CONFIG_NETFILTER_XT_TARGET_CONNMARK) += xt_CONNMARK.o -+obj-$(CONFIG_NETFILTER_XT_TARGET_DELUDE) += xt_DELUDE.o - obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o - obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) += xt_MARK.o - obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o -@@ -47,6 +49,7 @@ - obj-$(CONFIG_NETFILTER_XT_MATCH_MARK) += xt_mark.o - obj-$(CONFIG_NETFILTER_XT_MATCH_MULTIPORT) += xt_multiport.o - obj-$(CONFIG_NETFILTER_XT_MATCH_POLICY) += xt_policy.o -+obj-$(CONFIG_NETFILTER_XT_MATCH_PORTSCAN) += xt_portscan.o - obj-$(CONFIG_NETFILTER_XT_MATCH_PKTTYPE) += xt_pkttype.o - obj-$(CONFIG_NETFILTER_XT_MATCH_QUOTA) += xt_quota.o - obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o -diff -ruN linux-2.6.19.1.orig/net/netfilter/xt_CHAOS.c linux-2.6.19.1/net/netfilter/xt_CHAOS.c ---- linux-2.6.19.1.orig/net/netfilter/xt_CHAOS.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.1/net/netfilter/xt_CHAOS.c 2007-01-11 13:28:14.407920893 +0100 -@@ -0,0 +1,180 @@ -+/* -+ CHAOS target for netfilter -+ -+ Copyright © Jan Engelhardt , 2006 - 2007 -+ released under the terms of the GNU General Public -+ License version 2.x and only versions 2.x. -+*/ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "find_match.c" -+#define PFX KBUILD_MODNAME ": " -+ -+/* Out of tree workarounds */ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+# define HAVE_TARGUSERINFO 1 -+#endif -+ -+/* Module parameters */ -+static unsigned int reject_percentage = ~0U * .01; -+static unsigned int delude_percentage = ~0U * .0101; -+module_param(reject_percentage, uint, S_IRUGO | S_IWUSR); -+module_param(delude_percentage, uint, S_IRUGO | S_IWUSR); -+ -+/* References to other matches/targets */ -+static struct xt_match *xm_tcp; -+static struct xt_target *xt_delude, *xt_reject, *xt_tarpit; -+ -+/* Static data for other matches/targets */ -+static const struct ipt_reject_info reject_params = { -+ .with = ICMP_HOST_UNREACH, -+}; -+ -+static const struct xt_tcp tcp_params = { -+ .spts = {0, ~0}, -+ .dpts = {0, ~0}, -+}; -+ -+/* CHAOS functions */ -+static void xt_chaos_total(const struct xt_chaos_info *info, -+ struct sk_buff **pskb, const struct net_device *in, -+ const struct net_device *out, unsigned int hooknum) -+{ -+ const int protoff = 4 * (*pskb)->nh.iph->ihl; -+ const int offset = ntohs((*pskb)->nh.iph->frag_off) & IP_OFFSET; -+ const struct xt_target *destiny; -+ int hotdrop = 0, ret; -+ -+ ret = xm_tcp->match(*pskb, in, out, xm_tcp, &tcp_params, -+ offset, protoff, &hotdrop); -+ if(!ret || hotdrop || (unsigned int)net_random() > delude_percentage) -+ return; -+ -+ destiny = (info->variant == XTCHAOS_TARPIT) ? xt_tarpit : xt_delude; -+#ifdef HAVE_TARGUSERINFO -+ destiny->target(pskb, in, out, hooknum, destiny, NULL, NULL); -+#else -+ destiny->target(pskb, in, out, hooknum, destiny, NULL); -+#endif -+ return; -+} -+ -+static unsigned int xt_chaos_target(struct sk_buff **pskb, -+ const struct net_device *in, const struct net_device *out, -+ unsigned int hooknum, const struct xt_target *target, const void *targinfo -+#ifdef HAVE_TARGUSERINFO -+ , -+ void *userinfo -+#endif -+ ) -+{ -+ /* Equivalent to: -+ * -A chaos -m statistic --mode random --probability \ -+ * $reject_percentage -j REJECT --reject-with host-unreach; -+ * -A chaos -m statistic --mode random --probability \ -+ * $delude_percentage -j DELUDE; -+ * -A chaos -j DROP; -+ */ -+ const struct xt_chaos_info *info = targinfo; -+ -+ if((unsigned int)net_random() <= reject_percentage) -+#ifdef HAVE_TARGUSERINFO -+ return xt_reject->target(pskb, in, out, hooknum, target, -+ &reject_params, userinfo); -+#else -+ return xt_reject->target(pskb, in, out, hooknum, target, -+ &reject_params); -+#endif -+ -+ /* TARPIT/DELUDE may not be called from the OUTPUT chain */ -+ if((*pskb)->nh.iph->protocol == IPPROTO_TCP && -+ info->variant != XTCHAOS_NORMAL && hooknum != NF_IP_LOCAL_OUT) -+ xt_chaos_total(info, pskb, in, out, hooknum); -+ -+ return NF_DROP; -+} -+ -+static struct xt_target xt_chaos_info = { -+ .name = "CHAOS", -+ .target = xt_chaos_target, -+ .table = "filter", -+ .targetsize = sizeof(struct xt_chaos_info), -+ .hooks = (1 << NF_IP_LOCAL_IN) | (1 << NF_IP_FORWARD) | -+ (1 << NF_IP_LOCAL_OUT), -+ .family = AF_INET, -+ .me = THIS_MODULE, -+}; -+ -+static int __init xt_chaos_init(void) -+{ -+ int ret = -EINVAL; -+ -+ xm_tcp = xt_request_find_match(AF_INET, "tcp", 0); -+ if(xm_tcp == NULL) { -+ printk(KERN_WARNING PFX "Could not find \"tcp\" match\n"); -+ return -EINVAL; -+ } -+ -+ xt_reject = xt_request_find_target(AF_INET, "REJECT", 0); -+ if(xt_reject == NULL) { -+ printk(KERN_WARNING PFX "Could not find \"REJECT\" target\n"); -+ goto out2; -+ } -+ -+ xt_tarpit = xt_request_find_target(AF_INET, "TARPIT", 0); -+ if(xt_tarpit == NULL) { -+ printk(KERN_WARNING PFX "Could not find \"TARPIT\" target\n"); -+ goto out3; -+ } -+ -+ xt_delude = xt_request_find_target(AF_INET, "DELUDE", 0); -+ if(xt_delude == NULL) { -+ printk(KERN_WARNING PFX "Could not find \"DELUDE\" target\n"); -+ goto out4; -+ } -+ -+ if((ret = xt_register_target(&xt_chaos_info)) != 0) { -+ printk(KERN_WARNING PFX "xt_register_target returned " -+ "error %d\n", ret); -+ goto out5; -+ } -+ -+ return 0; -+ -+ out5: -+ module_put(xt_delude->me); -+ out4: -+ module_put(xt_tarpit->me); -+ out3: -+ module_put(xt_reject->me); -+ out2: -+ module_put(xm_tcp->me); -+ return ret; -+} -+ -+static void __exit xt_chaos_exit(void) -+{ -+ xt_unregister_target(&xt_chaos_info); -+ module_put(xm_tcp->me); -+ module_put(xt_reject->me); -+ module_put(xt_delude->me); -+ module_put(xt_tarpit->me); -+ return; -+} -+ -+module_init(xt_chaos_init); -+module_exit(xt_chaos_exit); -+MODULE_AUTHOR("Jan Engelhardt "); -+MODULE_DESCRIPTION("netfilter CHAOS target"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("ipt_CHAOS"); -diff -ruN linux-2.6.19.1.orig/net/netfilter/xt_DELUDE.c linux-2.6.19.1/net/netfilter/xt_DELUDE.c ---- linux-2.6.19.1.orig/net/netfilter/xt_DELUDE.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.1/net/netfilter/xt_DELUDE.c 2007-01-11 13:28:07.656144799 +0100 -@@ -0,0 +1,265 @@ -+/* -+ DELUDE target -+ Copyright © Jan Engelhardt , 2007 -+ -+ Based upon linux-2.6.18.5/net/ipv4/netfilter/ipt_REJECT.c: -+ (C) 1999-2001 Paul `Rusty' Russell -+ (C) 2002-2004 Netfilter Core Team -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License version 2 as -+ published by the Free Software Foundation. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#ifdef CONFIG_BRIDGE_NETFILTER -+#include -+#endif -+#define PFX KBUILD_MODNAME ": " -+ -+/* Out of tree workarounds */ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+# define HAVE_TARGINFOSIZE 1 -+# define HAVE_TARGUSERINFO 1 -+#endif -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) -+# define nfmark mark -+#endif -+ -+static inline struct rtable *route_reverse(struct sk_buff *skb, -+ struct tcphdr *tcph, int hook) -+{ -+ struct iphdr *iph = skb->nh.iph; -+ struct dst_entry *odst; -+ struct flowi fl = {}; -+ struct rtable *rt; -+ -+ /* We don't require ip forwarding to be enabled to be able to -+ * send a RST reply for bridged traffic. */ -+ if (hook != NF_IP_FORWARD -+#ifdef CONFIG_BRIDGE_NETFILTER -+ || (skb->nf_bridge && skb->nf_bridge->mask & BRNF_BRIDGED) -+#endif -+ ) { -+ fl.nl_u.ip4_u.daddr = iph->saddr; -+ if (hook == NF_IP_LOCAL_IN) -+ fl.nl_u.ip4_u.saddr = iph->daddr; -+ fl.nl_u.ip4_u.tos = RT_TOS(iph->tos); -+ -+ if (ip_route_output_key(&rt, &fl) != 0) -+ return NULL; -+ } else { -+ /* non-local src, find valid iif to satisfy -+ * rp-filter when calling ip_route_input. */ -+ fl.nl_u.ip4_u.daddr = iph->daddr; -+ if (ip_route_output_key(&rt, &fl) != 0) -+ return NULL; -+ -+ odst = skb->dst; -+ if (ip_route_input(skb, iph->saddr, iph->daddr, -+ RT_TOS(iph->tos), rt->u.dst.dev) != 0) { -+ dst_release(&rt->u.dst); -+ return NULL; -+ } -+ dst_release(&rt->u.dst); -+ rt = (struct rtable *)skb->dst; -+ skb->dst = odst; -+ -+ fl.nl_u.ip4_u.daddr = iph->saddr; -+ fl.nl_u.ip4_u.saddr = iph->daddr; -+ fl.nl_u.ip4_u.tos = RT_TOS(iph->tos); -+ } -+ -+ if (rt->u.dst.error) { -+ dst_release(&rt->u.dst); -+ return NULL; -+ } -+ -+ fl.proto = IPPROTO_TCP; -+ fl.fl_ip_sport = tcph->dest; -+ fl.fl_ip_dport = tcph->source; -+ -+ xfrm_lookup((struct dst_entry **)&rt, &fl, NULL, 0); -+ -+ return rt; -+} -+ -+static void send_reset(struct sk_buff *oldskb, int hook) -+{ -+ struct sk_buff *nskb; -+ struct iphdr *iph = oldskb->nh.iph; -+ struct tcphdr _otcph, *oth, *tcph; -+ struct rtable *rt; -+ u_int16_t tmp_port; -+ u_int32_t tmp_addr; -+ int hh_len; -+ -+ /* IP header checks: fragment. */ -+ if (oldskb->nh.iph->frag_off & htons(IP_OFFSET)) -+ return; -+ -+ oth = skb_header_pointer(oldskb, oldskb->nh.iph->ihl * 4, -+ sizeof(_otcph), &_otcph); -+ if (oth == NULL) -+ return; -+ -+ /* DELUDE only answers SYN. */ -+ if(!oth->syn || oth->ack || oth->fin || oth->rst) -+ return; -+ -+ /* Check checksum */ -+ if (nf_ip_checksum(oldskb, hook, iph->ihl * 4, IPPROTO_TCP)) -+ return; -+ -+ if ((rt = route_reverse(oldskb, oth, hook)) == NULL) -+ return; -+ -+ hh_len = LL_RESERVED_SPACE(rt->u.dst.dev); -+ -+ /* We need a linear, writeable skb. We also need to expand -+ headroom in case hh_len of incoming interface < hh_len of -+ outgoing interface */ -+ nskb = skb_copy_expand(oldskb, hh_len, skb_tailroom(oldskb), -+ GFP_ATOMIC); -+ if (!nskb) { -+ dst_release(&rt->u.dst); -+ return; -+ } -+ -+ dst_release(nskb->dst); -+ nskb->dst = &rt->u.dst; -+ -+ /* This packet will not be the same as the other: clear nf fields */ -+ nf_reset(nskb); -+ nskb->nfmark = 0; -+ skb_init_secmark(nskb); -+ -+ tcph = (struct tcphdr *)((u_int32_t*)nskb->nh.iph + nskb->nh.iph->ihl); -+ -+ /* Swap source and dest */ -+ tmp_addr = nskb->nh.iph->saddr; -+ nskb->nh.iph->saddr = nskb->nh.iph->daddr; -+ nskb->nh.iph->daddr = tmp_addr; -+ tmp_port = tcph->source; -+ tcph->source = tcph->dest; -+ tcph->dest = tmp_port; -+ -+ /* Truncate to length (no data) */ -+ tcph->doff = sizeof(struct tcphdr)/4; -+ skb_trim(nskb, nskb->nh.iph->ihl*4 + sizeof(struct tcphdr)); -+ nskb->nh.iph->tot_len = htons(nskb->len); -+ -+ tcph->seq = oth->ack_seq; -+ tcph->ack_seq = 0; -+ -+ /* Reset flags */ -+ ((u_int8_t *)tcph)[13] = 0; -+ tcph->syn = tcph->ack = 1; -+ -+ tcph->window = 0; -+ tcph->urg_ptr = 0; -+ -+ /* Adjust TCP checksum */ -+ tcph->check = 0; -+ tcph->check = tcp_v4_check(tcph, sizeof(struct tcphdr), -+ nskb->nh.iph->saddr, -+ nskb->nh.iph->daddr, -+ csum_partial((char *)tcph, -+ sizeof(struct tcphdr), 0)); -+ -+ /* Adjust IP TTL, DF */ -+ nskb->nh.iph->ttl = dst_metric(nskb->dst, RTAX_HOPLIMIT); -+ /* Set DF, id = 0 */ -+ nskb->nh.iph->frag_off = htons(IP_DF); -+ nskb->nh.iph->id = 0; -+ -+ /* Adjust IP checksum */ -+ nskb->nh.iph->check = 0; -+ nskb->nh.iph->check = ip_fast_csum((unsigned char *)nskb->nh.iph, -+ nskb->nh.iph->ihl); -+ -+ /* "Never happens" */ -+ if (nskb->len > dst_mtu(nskb->dst)) -+ goto free_nskb; -+ -+ nf_ct_attach(nskb, oldskb); -+ -+ NF_HOOK(PF_INET, NF_IP_LOCAL_OUT, nskb, NULL, nskb->dst->dev, -+ dst_output); -+ return; -+ -+ free_nskb: -+ kfree_skb(nskb); -+ return; -+} -+ -+static unsigned int xt_delude_target(struct sk_buff **pskb, -+ const struct net_device *in, const struct net_device *out, -+ unsigned int hooknum, const struct xt_target *target, const void *targinfo -+#ifdef HAVE_TARGUSERINFO -+ , -+ void *userinfo -+#endif -+ ) -+{ -+ /* WARNING: This code causes reentry within iptables. -+ This means that the iptables jump stack is now crap. We -+ must return an absolute verdict. --RR */ -+ send_reset(*pskb, hooknum); -+ return NF_DROP; -+} -+ -+static int xt_delude_check(const char *tablename, const void *e_void, -+ const struct xt_target *target, void *targinfo, -+#ifdef HAVE_TARGINFOSIZE -+ unsigned int targinfosize, -+#endif -+ unsigned int hook_mask) -+{ -+ if(hook_mask & ~((1 << NF_IP_LOCAL_IN) | (1 << NF_IP_FORWARD))) { -+ printk(KERN_WARNING PFX "DELUDE may not be used in chains " -+ "other than INPUT and FORWARD\n"); -+ return 0; -+ } -+ return 1; -+} -+ -+static struct xt_target xt_delude_info = { -+ .name = "DELUDE", -+ .target = xt_delude_target, -+ .checkentry = xt_delude_check, -+ .table = "filter", -+ .hooks = (1 << NF_IP_LOCAL_IN) | (1 << NF_IP_FORWARD) | -+ (1 << NF_IP_LOCAL_OUT), -+ .proto = IPPROTO_TCP, -+ .family = AF_INET, -+ .me = THIS_MODULE, -+}; -+ -+static int __init xt_delude_init(void) -+{ -+ return xt_register_target(&xt_delude_info); -+} -+ -+static void __exit xt_delude_exit(void) -+{ -+ xt_unregister_target(&xt_delude_info); -+} -+ -+module_init(xt_delude_init); -+module_exit(xt_delude_exit); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Jan Engelhardt "); -+MODULE_DESCRIPTION("netfilter DELUDE target"); -diff -ruN linux-2.6.19.1.orig/net/netfilter/xt_portscan.c linux-2.6.19.1/net/netfilter/xt_portscan.c ---- linux-2.6.19.1.orig/net/netfilter/xt_portscan.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.1/net/netfilter/xt_portscan.c 2007-01-11 13:28:14.407920893 +0100 -@@ -0,0 +1,282 @@ -+/* -+ portscan match for netfilter -+ -+ Written by Jan Engelhardt, 2006 - 2007 -+ released under the terms of the GNU General Public -+ License version 2.x and only versions 2.x. -+*/ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#if defined(CONFIG_IP_NF_CONNTRACK) || defined(CONFIG_IP_NF_CONNTRACK_MODULE) -+# include -+#else /* linux-2.6.20+ */ -+# include -+#endif -+#include -+#define PFX KBUILD_MODNAME ": " -+ -+/* Out of tree workarounds */ -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+# define HAVE_MATCHINFOSIZE 1 -+#endif -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) -+# define nfmark mark -+#endif -+ -+enum { -+ TCP_FLAGS_ALL3 = TCP_FLAG_FIN | TCP_FLAG_RST | TCP_FLAG_SYN, -+ TCP_FLAGS_ALL4 = TCP_FLAGS_ALL3 | TCP_FLAG_ACK, -+ TCP_FLAGS_ALL6 = TCP_FLAGS_ALL4 | TCP_FLAG_PSH | TCP_FLAG_URG, -+}; -+ -+/* Module parameters */ -+static unsigned int -+ connmark_mask = ~0, -+ packet_mask = ~0, -+ mark_seen = 0x9, -+ mark_synrcv = 0x1, -+ mark_closed = 0x2, -+ mark_synscan = 0x3, -+ mark_estab1 = 0x4, -+ mark_estab2 = 0x5, -+ mark_cnscan = 0x6, -+ mark_grscan = 0x7, -+ mark_valid = 0x8; -+ -+module_param(connmark_mask, uint, S_IRUGO | S_IWUSR); -+module_param(packet_mask, uint, S_IRUGO | S_IWUSR); -+module_param(mark_seen, uint, S_IRUGO | S_IWUSR); -+module_param(mark_synrcv, uint, S_IRUGO | S_IWUSR); -+module_param(mark_closed, uint, S_IRUGO | S_IWUSR); -+module_param(mark_synscan, uint, S_IRUGO | S_IWUSR); -+module_param(mark_estab1, uint, S_IRUGO | S_IWUSR); -+module_param(mark_estab2, uint, S_IRUGO | S_IWUSR); -+module_param(mark_cnscan, uint, S_IRUGO | S_IWUSR); -+module_param(mark_grscan, uint, S_IRUGO | S_IWUSR); -+module_param(mark_valid, uint, S_IRUGO | S_IWUSR); -+MODULE_PARM_DESC(connmark_mask, "only set specified bits in connection mark"); -+MODULE_PARM_DESC(packet_mask, "only set specified bits in packet mark"); -+MODULE_PARM_DESC(mark_seen, "nfmark value for packet-seen state"); -+MODULE_PARM_DESC(mark_synrcv, "connmark value for SYN Received state"); -+MODULE_PARM_DESC(mark_closed, "connmark value for closed state"); -+MODULE_PARM_DESC(mark_synscan, "connmark value for SYN Scan state"); -+MODULE_PARM_DESC(mark_estab1, "connmark value for Established-1 state"); -+MODULE_PARM_DESC(mark_estab2, "connmark value for Established-2 state"); -+MODULE_PARM_DESC(mark_cnscan, "connmark value for Connect Scan state"); -+MODULE_PARM_DESC(mark_grscan, "connmark value for Grab Scan state"); -+MODULE_PARM_DESC(mark_valid, "connmark value for Valid state"); -+ -+/* TCP flag functions */ -+static inline int tflg_ack4(const struct tcphdr *th) -+{ -+ return (tcp_flag_word(th) & TCP_FLAGS_ALL4) == TCP_FLAG_ACK; -+} -+ -+static inline int tflg_ack6(const struct tcphdr *th) -+{ -+ return (tcp_flag_word(th) & TCP_FLAGS_ALL6) == TCP_FLAG_ACK; -+} -+ -+static inline int tflg_fin(const struct tcphdr *th) -+{ -+ return (tcp_flag_word(th) & TCP_FLAGS_ALL3) == TCP_FLAG_FIN; -+} -+ -+static inline int tflg_rst(const struct tcphdr *th) -+{ -+ return (tcp_flag_word(th) & TCP_FLAGS_ALL3) == TCP_FLAG_RST; -+} -+ -+static inline int tflg_rstack(const struct tcphdr *th) -+{ -+ return (tcp_flag_word(th) & TCP_FLAGS_ALL4) == -+ (TCP_FLAG_ACK | TCP_FLAG_RST); -+} -+ -+static inline int tflg_syn(const struct tcphdr *th) -+{ -+ return (tcp_flag_word(th) & TCP_FLAGS_ALL4) == TCP_FLAG_SYN; -+} -+ -+static inline int tflg_synack(const struct tcphdr *th) -+{ -+ return (tcp_flag_word(th) & TCP_FLAGS_ALL4) == -+ (TCP_FLAG_SYN | TCP_FLAG_ACK); -+} -+ -+/* portscan functions */ -+static inline int xt_portscan_stealth(const struct tcphdr *th) -+{ -+ /* -+ * "Connection refused" replies to our own probes must not be matched. -+ */ -+ if(tflg_rstack(th)) -+ return 0; -+ -+ if(tflg_rst(th) && printk_ratelimit()) { -+ printk(KERN_WARNING PFX "Warning: Pure RST received\n"); -+ return 0; -+ } -+ -+ /* -+ * -p tcp ! --syn -m conntrack --ctstate INVALID: Looking for non-start -+ * packets that are not associated with any connection -- this will -+ * match most scan types (NULL, XMAS, FIN) and ridiculous flag -+ * combinations (SYN-RST, SYN-FIN, SYN-FIN-RST, FIN-RST, etc.). -+ */ -+ return !tflg_syn(th); -+} -+ -+static inline int xt_portscan_full(int mark, enum ip_conntrack_info ctstate, -+ int loopback, const struct tcphdr *tcph, int payload_len) -+{ -+ if(mark == mark_estab2) { -+ /* -+ * -m connmark --mark $ESTAB2 -+ */ -+ if(tflg_ack4(tcph) && payload_len == 0) -+ return mark; /* keep mark */ -+ else if(tflg_rst(tcph) || tflg_fin(tcph)) -+ return mark_grscan; -+ else -+ return mark_valid; -+ } else if(mark == mark_estab1) { -+ /* -+ * -m connmark --mark $ESTAB1 -+ */ -+ if(tflg_rst(tcph) || tflg_fin(tcph)) -+ return mark_cnscan; -+ else if(!loopback && tflg_ack4(tcph) && payload_len == 0) -+ return mark_estab2; -+ else -+ return mark_valid; -+ } else if(mark == mark_synrcv) { -+ /* -+ * -m connmark --mark $SYN -+ */ -+ if(loopback && tflg_synack(tcph)) -+ return mark; /* keep mark */ -+ else if(loopback && tflg_rstack(tcph)) -+ return mark_closed; -+ else if(tflg_ack6(tcph)) -+ return mark_estab1; -+ else -+ return mark_synscan; -+ } else if(ctstate == IP_CT_NEW && tflg_syn(tcph)) { -+ /* -+ * -p tcp --syn --ctstate NEW -+ */ -+ return mark_synrcv; -+ } -+ return mark; -+} -+ -+static int xt_portscan_match(const struct sk_buff *skb, -+ const struct net_device *in, const struct net_device *out, -+ const struct xt_match *match, const void *matchinfo, int offset, -+ unsigned int protoff, int *hotdrop) -+{ -+ const struct xt_portscan_info *info = matchinfo; -+ enum ip_conntrack_info ctstate; -+ struct ip_conntrack *ctdata; -+ const struct tcphdr *tcph; -+ struct tcphdr tcph_buf; -+ -+ tcph = skb_header_pointer(skb, protoff, sizeof(tcph_buf), &tcph_buf); -+ if(tcph == NULL) -+ return 0; -+ -+ /* Check for invalid packets: -m conntrack --ctstate INVALID */ -+ if((ctdata = ip_conntrack_get(skb, &ctstate)) == NULL) { -+ if(info->match_stealth) -+ return xt_portscan_stealth(tcph); -+ /* -+ * If @ctdata is NULL, we cannot match the other scan -+ * types, return. -+ */ -+ return 0; -+ } -+ -+ /* -+ * If -m portscan was previously applied to this packet, the rules we -+ * simulate must not be run through again. And for speedup, do not call -+ * it either when the connection is already VALID. -+ */ -+ if((ctdata->mark & connmark_mask) == mark_valid || -+ (skb->nfmark & packet_mask) != mark_seen) -+ { -+ unsigned int n; -+ n = xt_portscan_full(ctdata->mark & connmark_mask, ctstate, -+ in == &loopback_dev, tcph, -+ skb->len - protoff - 4 * tcph->doff); -+ -+ ctdata->mark = (ctdata->mark & ~connmark_mask) | n; -+ ((struct sk_buff *)skb)->nfmark = -+ (skb->nfmark & ~packet_mask) | mark_seen; -+ } -+ -+ return (info->match_syn && ctdata->mark == mark_synscan) || -+ (info->match_cn && ctdata->mark == mark_cnscan) || -+ (info->match_gr && ctdata->mark == mark_grscan); -+} -+ -+static int xt_portscan_checkentry(const char *tablename, const void *entry, -+ const struct xt_match *match, void *matchinfo, -+#ifdef HAVE_MATCHINFOSIZE -+ unsigned int matchinfosize, -+#endif -+ unsigned int hook_mask) -+{ -+ const struct xt_portscan_info *info = matchinfo; -+#ifdef HAVE_MATCHINFOSIZE -+ if(matchinfosize != XT_ALIGN(sizeof(struct xt_portscan_info))) { -+ printk(KERN_WARNING PFX "matchinfosize %u != %Zu\n", -+ matchinfosize, -+ XT_ALIGN(sizeof(struct xt_portscan_info))); -+ return 0; -+ } -+#endif -+ if((info->match_stealth & ~1) || (info->match_syn & ~1) || -+ (info->match_cn & ~1) || (info->match_gr & ~1)) { -+ printk(KERN_WARNING PFX "Invalid flags\n"); -+ return 0; -+ } -+ return 1; -+} -+ -+static struct xt_match xt_portscan = { -+ .name = "portscan", -+ .match = xt_portscan_match, -+ .checkentry = xt_portscan_checkentry, -+ .matchsize = sizeof(struct xt_portscan_info), -+ .proto = IPPROTO_TCP, -+ .family = AF_INET, -+ .me = THIS_MODULE, -+}; -+ -+static int __init xt_portscan_init(void) -+{ -+ return xt_register_match(&xt_portscan); -+} -+ -+static void __exit xt_portscan_exit(void) -+{ -+ xt_unregister_match(&xt_portscan); -+ return; -+} -+ -+module_init(xt_portscan_init); -+module_exit(xt_portscan_exit); -+MODULE_AUTHOR("Jan Engelhardt "); -+MODULE_DESCRIPTION("netfilter portscan match module"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("ipt_portscan"); diff --git a/target/linux/etrax/patches/generic_2.6/200-sched_esfq.patch b/target/linux/etrax/patches/generic_2.6/200-sched_esfq.patch deleted file mode 100644 index 6830b833ad..0000000000 --- a/target/linux/etrax/patches/generic_2.6/200-sched_esfq.patch +++ /dev/null @@ -1,730 +0,0 @@ -diff -urN linux-2.6.19.old/include/linux/pkt_sched.h linux-2.6.19.dev/include/linux/pkt_sched.h ---- linux-2.6.19.old/include/linux/pkt_sched.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/pkt_sched.h 2006-12-14 03:13:51.000000000 +0100 -@@ -146,8 +146,35 @@ - * - * The only reason for this is efficiency, it is possible - * to change these parameters in compile time. -+ * -+ * If you need to play with these values use esfq instead. - */ - -+/* ESFQ section */ -+ -+enum -+{ -+ /* traditional */ -+ TCA_SFQ_HASH_CLASSIC, -+ TCA_SFQ_HASH_DST, -+ TCA_SFQ_HASH_SRC, -+ TCA_SFQ_HASH_FWMARK, -+ /* direct */ -+ TCA_SFQ_HASH_DSTDIR, -+ TCA_SFQ_HASH_SRCDIR, -+ TCA_SFQ_HASH_FWMARKDIR, -+}; -+ -+struct tc_esfq_qopt -+{ -+ unsigned quantum; /* Bytes per round allocated to flow */ -+ int perturb_period; /* Period of hash perturbation */ -+ __u32 limit; /* Maximal packets in queue */ -+ unsigned divisor; /* Hash divisor */ -+ unsigned flows; /* Maximal number of flows */ -+ unsigned hash_kind; /* Hash function to use for flow identification */ -+}; -+ - /* RED section */ - - enum -diff -urN linux-2.6.19.old/net/sched/Kconfig linux-2.6.19.dev/net/sched/Kconfig ---- linux-2.6.19.old/net/sched/Kconfig 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/sched/Kconfig 2006-12-14 03:13:51.000000000 +0100 -@@ -185,6 +185,28 @@ - To compile this code as a module, choose M here: the - module will be called sch_sfq. - -+config NET_SCH_ESFQ -+ tristate "ESFQ queue" -+ depends on NET_SCHED -+ ---help--- -+ Say Y here if you want to use the Enhanced Stochastic Fairness -+ Queueing (ESFQ) packet scheduling algorithm for some of your network -+ devices or as a leaf discipline for a classful qdisc such as HTB or -+ CBQ (see the top of for details and -+ references to the SFQ algorithm). -+ -+ This is an enchanced SFQ version which allows you to control some -+ hardcoded values in the SFQ scheduler: queue depth, hash table size, -+ and queues limit. -+ -+ ESFQ also adds control to the hash function used to identify packet -+ flows. The original SFQ hashes by individual flow (TCP session or UDP -+ stream); ESFQ can hash by src or dst IP as well, which can be more -+ fair to users in some networking situations. -+ -+ To compile this code as a module, choose M here: the -+ module will be called sch_esfq. -+ - config NET_SCH_TEQL - tristate "True Link Equalizer (TEQL)" - ---help--- -diff -urN linux-2.6.19.old/net/sched/Makefile linux-2.6.19.dev/net/sched/Makefile ---- linux-2.6.19.old/net/sched/Makefile 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/sched/Makefile 2006-12-14 03:13:51.000000000 +0100 -@@ -23,6 +23,7 @@ - obj-$(CONFIG_NET_SCH_INGRESS) += sch_ingress.o - obj-$(CONFIG_NET_SCH_DSMARK) += sch_dsmark.o - obj-$(CONFIG_NET_SCH_SFQ) += sch_sfq.o -+obj-$(CONFIG_NET_SCH_ESFQ) += sch_esfq.o - obj-$(CONFIG_NET_SCH_TBF) += sch_tbf.o - obj-$(CONFIG_NET_SCH_TEQL) += sch_teql.o - obj-$(CONFIG_NET_SCH_PRIO) += sch_prio.o -diff -urN linux-2.6.19.old/net/sched/sch_esfq.c linux-2.6.19.dev/net/sched/sch_esfq.c ---- linux-2.6.19.old/net/sched/sch_esfq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/net/sched/sch_esfq.c 2006-12-14 03:13:51.000000000 +0100 -@@ -0,0 +1,644 @@ -+/* -+ * net/sched/sch_esfq.c Extended Stochastic Fairness Queueing discipline. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ * -+ * Authors: Alexey Kuznetsov, -+ * -+ * Changes: Alexander Atanasov, -+ * Added dynamic depth,limit,divisor,hash_kind options. -+ * Added dst and src hashes. -+ * -+ * Alexander Clouter, -+ * Ported ESFQ to Linux 2.6. -+ * -+ * Corey Hickey, -+ * Maintenance of the Linux 2.6 port. -+ * Added fwmark hash (thanks to Robert Kurjata) -+ * Added direct hashing for src, dst, and fwmark. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+/* Stochastic Fairness Queuing algorithm. -+ For more comments look at sch_sfq.c. -+ The difference is that you can change limit, depth, -+ hash table size and choose 7 hash types. -+ -+ classic: same as in sch_sfq.c -+ dst: destination IP address -+ src: source IP address -+ fwmark: netfilter mark value -+ dst_direct: -+ src_direct: -+ fwmark_direct: direct hashing of the above sources -+ -+ TODO: -+ make sfq_change work. -+*/ -+ -+ -+/* This type should contain at least SFQ_DEPTH*2 values */ -+typedef unsigned int esfq_index; -+ -+struct esfq_head -+{ -+ esfq_index next; -+ esfq_index prev; -+}; -+ -+struct esfq_sched_data -+{ -+/* Parameters */ -+ int perturb_period; -+ unsigned quantum; /* Allotment per round: MUST BE >= MTU */ -+ int limit; -+ unsigned depth; -+ unsigned hash_divisor; -+ unsigned hash_kind; -+/* Variables */ -+ struct timer_list perturb_timer; -+ int perturbation; -+ esfq_index tail; /* Index of current slot in round */ -+ esfq_index max_depth; /* Maximal depth */ -+ -+ esfq_index *ht; /* Hash table */ -+ esfq_index *next; /* Active slots link */ -+ short *allot; /* Current allotment per slot */ -+ unsigned short *hash; /* Hash value indexed by slots */ -+ struct sk_buff_head *qs; /* Slot queue */ -+ struct esfq_head *dep; /* Linked list of slots, indexed by depth */ -+ unsigned dyn_min; /* For dynamic divisor adjustment; minimum value seen */ -+ unsigned dyn_max; /* maximum value seen */ -+ unsigned dyn_range; /* saved range */ -+}; -+ -+static __inline__ unsigned esfq_hash_u32(struct esfq_sched_data *q,u32 h) -+{ -+ int pert = q->perturbation; -+ -+ if (pert) -+ h = (h<>(0x1F - pert)); -+ -+ h = ntohl(h) * 2654435761UL; -+ return h & (q->hash_divisor-1); -+} -+ -+/* Hash input values directly into the "nearest" slot, taking into account the -+ * range of input values seen. This is most useful when the hash table is at -+ * least as large as the range of possible values. */ -+static __inline__ unsigned esfq_hash_direct(struct esfq_sched_data *q, u32 h) -+{ -+ /* adjust minimum and maximum */ -+ if (h < q->dyn_min || h > q->dyn_max) { -+ q->dyn_min = h < q->dyn_min ? h : q->dyn_min; -+ q->dyn_max = h > q->dyn_max ? h : q->dyn_max; -+ -+ /* find new range */ -+ if ((q->dyn_range = q->dyn_max - q->dyn_min) >= q->hash_divisor) -+ printk(KERN_WARNING "ESFQ: (direct hash) Input range %u is larger than hash " -+ "table. See ESFQ README for details.\n", q->dyn_range); -+ } -+ -+ /* hash input values into slot numbers */ -+ if (q->dyn_min == q->dyn_max) -+ return 0; /* only one value seen; avoid division by 0 */ -+ else -+ return (h - q->dyn_min) * (q->hash_divisor - 1) / q->dyn_range; -+} -+ -+static __inline__ unsigned esfq_fold_hash_classic(struct esfq_sched_data *q, u32 h, u32 h1) -+{ -+ int pert = q->perturbation; -+ -+ /* Have we any rotation primitives? If not, WHY? */ -+ h ^= (h1<>(0x1F - pert)); -+ h ^= h>>10; -+ return h & (q->hash_divisor-1); -+} -+ -+static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb) -+{ -+ u32 h, h2; -+ u32 hs; -+ u32 nfm; -+ -+ switch (skb->protocol) { -+ case __constant_htons(ETH_P_IP): -+ { -+ struct iphdr *iph = skb->nh.iph; -+ h = iph->daddr; -+ hs = iph->saddr; -+ nfm = skb->nfmark; -+ h2 = hs^iph->protocol; -+ if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) && -+ (iph->protocol == IPPROTO_TCP || -+ iph->protocol == IPPROTO_UDP || -+ iph->protocol == IPPROTO_SCTP || -+ iph->protocol == IPPROTO_DCCP || -+ iph->protocol == IPPROTO_ESP)) -+ h2 ^= *(((u32*)iph) + iph->ihl); -+ break; -+ } -+ case __constant_htons(ETH_P_IPV6): -+ { -+ struct ipv6hdr *iph = skb->nh.ipv6h; -+ h = iph->daddr.s6_addr32[3]; -+ hs = iph->saddr.s6_addr32[3]; -+ nfm = skb->nfmark; -+ h2 = hs^iph->nexthdr; -+ if (iph->nexthdr == IPPROTO_TCP || -+ iph->nexthdr == IPPROTO_UDP || -+ iph->nexthdr == IPPROTO_SCTP || -+ iph->nexthdr == IPPROTO_DCCP || -+ iph->nexthdr == IPPROTO_ESP) -+ h2 ^= *(u32*)&iph[1]; -+ break; -+ } -+ default: -+ h = (u32)(unsigned long)skb->dst; -+ hs = (u32)(unsigned long)skb->sk; -+ nfm = skb->nfmark; -+ h2 = hs^skb->protocol; -+ } -+ switch(q->hash_kind) -+ { -+ case TCA_SFQ_HASH_CLASSIC: -+ return esfq_fold_hash_classic(q, h, h2); -+ case TCA_SFQ_HASH_DST: -+ return esfq_hash_u32(q,h); -+ case TCA_SFQ_HASH_DSTDIR: -+ return esfq_hash_direct(q, ntohl(h)); -+ case TCA_SFQ_HASH_SRC: -+ return esfq_hash_u32(q,hs); -+ case TCA_SFQ_HASH_SRCDIR: -+ return esfq_hash_direct(q, ntohl(hs)); -+#ifdef CONFIG_NETFILTER -+ case TCA_SFQ_HASH_FWMARK: -+ return esfq_hash_u32(q,nfm); -+ case TCA_SFQ_HASH_FWMARKDIR: -+ return esfq_hash_direct(q,nfm); -+#endif -+ default: -+ if (net_ratelimit()) -+ printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n"); -+ } -+ return esfq_fold_hash_classic(q, h, h2); -+} -+ -+static inline void esfq_link(struct esfq_sched_data *q, esfq_index x) -+{ -+ esfq_index p, n; -+ int d = q->qs[x].qlen + q->depth; -+ -+ p = d; -+ n = q->dep[d].next; -+ q->dep[x].next = n; -+ q->dep[x].prev = p; -+ q->dep[p].next = q->dep[n].prev = x; -+} -+ -+static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x) -+{ -+ esfq_index p, n; -+ -+ n = q->dep[x].next; -+ p = q->dep[x].prev; -+ q->dep[p].next = n; -+ q->dep[n].prev = p; -+ -+ if (n == p && q->max_depth == q->qs[x].qlen + 1) -+ q->max_depth--; -+ -+ esfq_link(q, x); -+} -+ -+static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x) -+{ -+ esfq_index p, n; -+ int d; -+ -+ n = q->dep[x].next; -+ p = q->dep[x].prev; -+ q->dep[p].next = n; -+ q->dep[n].prev = p; -+ d = q->qs[x].qlen; -+ if (q->max_depth < d) -+ q->max_depth = d; -+ -+ esfq_link(q, x); -+} -+ -+static unsigned int esfq_drop(struct Qdisc *sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ esfq_index d = q->max_depth; -+ struct sk_buff *skb; -+ unsigned int len; -+ -+ /* Queue is full! Find the longest slot and -+ drop a packet from it */ -+ -+ if (d > 1) { -+ esfq_index x = q->dep[d+q->depth].next; -+ skb = q->qs[x].prev; -+ len = skb->len; -+ __skb_unlink(skb, &q->qs[x]); -+ kfree_skb(skb); -+ esfq_dec(q, x); -+ sch->q.qlen--; -+ sch->qstats.drops++; -+ return len; -+ } -+ -+ if (d == 1) { -+ /* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */ -+ d = q->next[q->tail]; -+ q->next[q->tail] = q->next[d]; -+ q->allot[q->next[d]] += q->quantum; -+ skb = q->qs[d].prev; -+ len = skb->len; -+ __skb_unlink(skb, &q->qs[d]); -+ kfree_skb(skb); -+ esfq_dec(q, d); -+ sch->q.qlen--; -+ q->ht[q->hash[d]] = q->depth; -+ sch->qstats.drops++; -+ return len; -+ } -+ -+ return 0; -+} -+ -+static int -+esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ unsigned hash = esfq_hash(q, skb); -+ unsigned depth = q->depth; -+ esfq_index x; -+ -+ x = q->ht[hash]; -+ if (x == depth) { -+ q->ht[hash] = x = q->dep[depth].next; -+ q->hash[x] = hash; -+ } -+ __skb_queue_tail(&q->qs[x], skb); -+ esfq_inc(q, x); -+ if (q->qs[x].qlen == 1) { /* The flow is new */ -+ if (q->tail == depth) { /* It is the first flow */ -+ q->tail = x; -+ q->next[x] = x; -+ q->allot[x] = q->quantum; -+ } else { -+ q->next[x] = q->next[q->tail]; -+ q->next[q->tail] = x; -+ q->tail = x; -+ } -+ } -+ if (++sch->q.qlen < q->limit-1) { -+ sch->bstats.bytes += skb->len; -+ sch->bstats.packets++; -+ return 0; -+ } -+ -+ esfq_drop(sch); -+ return NET_XMIT_CN; -+} -+ -+static int -+esfq_requeue(struct sk_buff *skb, struct Qdisc* sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ unsigned hash = esfq_hash(q, skb); -+ unsigned depth = q->depth; -+ esfq_index x; -+ -+ x = q->ht[hash]; -+ if (x == depth) { -+ q->ht[hash] = x = q->dep[depth].next; -+ q->hash[x] = hash; -+ } -+ __skb_queue_head(&q->qs[x], skb); -+ esfq_inc(q, x); -+ if (q->qs[x].qlen == 1) { /* The flow is new */ -+ if (q->tail == depth) { /* It is the first flow */ -+ q->tail = x; -+ q->next[x] = x; -+ q->allot[x] = q->quantum; -+ } else { -+ q->next[x] = q->next[q->tail]; -+ q->next[q->tail] = x; -+ q->tail = x; -+ } -+ } -+ if (++sch->q.qlen < q->limit - 1) { -+ sch->qstats.requeues++; -+ return 0; -+ } -+ -+ sch->qstats.drops++; -+ esfq_drop(sch); -+ return NET_XMIT_CN; -+} -+ -+ -+ -+ -+static struct sk_buff * -+esfq_dequeue(struct Qdisc* sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ struct sk_buff *skb; -+ unsigned depth = q->depth; -+ esfq_index a, old_a; -+ -+ /* No active slots */ -+ if (q->tail == depth) -+ return NULL; -+ -+ a = old_a = q->next[q->tail]; -+ -+ /* Grab packet */ -+ skb = __skb_dequeue(&q->qs[a]); -+ esfq_dec(q, a); -+ sch->q.qlen--; -+ -+ /* Is the slot empty? */ -+ if (q->qs[a].qlen == 0) { -+ q->ht[q->hash[a]] = depth; -+ a = q->next[a]; -+ if (a == old_a) { -+ q->tail = depth; -+ return skb; -+ } -+ q->next[q->tail] = a; -+ q->allot[a] += q->quantum; -+ } else if ((q->allot[a] -= skb->len) <= 0) { -+ q->tail = a; -+ a = q->next[a]; -+ q->allot[a] += q->quantum; -+ } -+ -+ return skb; -+} -+ -+static void -+esfq_reset(struct Qdisc* sch) -+{ -+ struct sk_buff *skb; -+ -+ while ((skb = esfq_dequeue(sch)) != NULL) -+ kfree_skb(skb); -+} -+ -+static void esfq_perturbation(unsigned long arg) -+{ -+ struct Qdisc *sch = (struct Qdisc*)arg; -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ -+ q->perturbation = net_random()&0x1F; -+ -+ if (q->perturb_period) { -+ q->perturb_timer.expires = jiffies + q->perturb_period; -+ add_timer(&q->perturb_timer); -+ } -+} -+ -+static int esfq_change(struct Qdisc *sch, struct rtattr *opt) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ struct tc_esfq_qopt *ctl = RTA_DATA(opt); -+ int old_perturb = q->perturb_period; -+ -+ if (opt->rta_len < RTA_LENGTH(sizeof(*ctl))) -+ return -EINVAL; -+ -+ sch_tree_lock(sch); -+ q->quantum = ctl->quantum ? : psched_mtu(sch->dev); -+ q->perturb_period = ctl->perturb_period*HZ; -+// q->hash_divisor = ctl->divisor; -+// q->tail = q->limit = q->depth = ctl->flows; -+ -+ if (ctl->limit) -+ q->limit = min_t(u32, ctl->limit, q->depth); -+ -+ if (ctl->hash_kind) { -+ q->hash_kind = ctl->hash_kind; -+ if (q->hash_kind != TCA_SFQ_HASH_CLASSIC) -+ q->perturb_period = 0; -+ } -+ -+ // is sch_tree_lock enough to do this ? -+ while (sch->q.qlen >= q->limit-1) -+ esfq_drop(sch); -+ -+ if (old_perturb) -+ del_timer(&q->perturb_timer); -+ if (q->perturb_period) { -+ q->perturb_timer.expires = jiffies + q->perturb_period; -+ add_timer(&q->perturb_timer); -+ } else { -+ q->perturbation = 0; -+ } -+ sch_tree_unlock(sch); -+ return 0; -+} -+ -+static int esfq_init(struct Qdisc *sch, struct rtattr *opt) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ struct tc_esfq_qopt *ctl; -+ esfq_index p = ~0UL/2; -+ int i; -+ -+ if (opt && opt->rta_len < RTA_LENGTH(sizeof(*ctl))) -+ return -EINVAL; -+ -+ init_timer(&q->perturb_timer); -+ q->perturb_timer.data = (unsigned long)sch; -+ q->perturb_timer.function = esfq_perturbation; -+ q->perturbation = 0; -+ q->hash_kind = TCA_SFQ_HASH_CLASSIC; -+ q->max_depth = 0; -+ q->dyn_min = ~0U; /* maximum value for this type */ -+ q->dyn_max = 0; /* dyn_min/dyn_max will be set properly upon first packet */ -+ if (opt == NULL) { -+ q->quantum = psched_mtu(sch->dev); -+ q->perturb_period = 0; -+ q->hash_divisor = 1024; -+ q->tail = q->limit = q->depth = 128; -+ -+ } else { -+ ctl = RTA_DATA(opt); -+ q->quantum = ctl->quantum ? : psched_mtu(sch->dev); -+ q->perturb_period = ctl->perturb_period*HZ; -+ q->hash_divisor = ctl->divisor ? : 1024; -+ q->tail = q->limit = q->depth = ctl->flows ? : 128; -+ -+ if ( q->depth > p - 1 ) -+ return -EINVAL; -+ -+ if (ctl->limit) -+ q->limit = min_t(u32, ctl->limit, q->depth); -+ -+ if (ctl->hash_kind) { -+ q->hash_kind = ctl->hash_kind; -+ } -+ -+ if (q->perturb_period) { -+ q->perturb_timer.expires = jiffies + q->perturb_period; -+ add_timer(&q->perturb_timer); -+ } -+ } -+ -+ q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL); -+ if (!q->ht) -+ goto err_case; -+ -+ q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL); -+ if (!q->dep) -+ goto err_case; -+ q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL); -+ if (!q->next) -+ goto err_case; -+ -+ q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL); -+ if (!q->allot) -+ goto err_case; -+ q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL); -+ if (!q->hash) -+ goto err_case; -+ q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL); -+ if (!q->qs) -+ goto err_case; -+ -+ for (i=0; i< q->hash_divisor; i++) -+ q->ht[i] = q->depth; -+ for (i=0; idepth; i++) { -+ skb_queue_head_init(&q->qs[i]); -+ q->dep[i+q->depth].next = i+q->depth; -+ q->dep[i+q->depth].prev = i+q->depth; -+ } -+ -+ for (i=0; idepth; i++) -+ esfq_link(q, i); -+ return 0; -+err_case: -+ del_timer(&q->perturb_timer); -+ if (q->ht) -+ kfree(q->ht); -+ if (q->dep) -+ kfree(q->dep); -+ if (q->next) -+ kfree(q->next); -+ if (q->allot) -+ kfree(q->allot); -+ if (q->hash) -+ kfree(q->hash); -+ if (q->qs) -+ kfree(q->qs); -+ return -ENOBUFS; -+} -+ -+static void esfq_destroy(struct Qdisc *sch) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ del_timer(&q->perturb_timer); -+ if(q->ht) -+ kfree(q->ht); -+ if(q->dep) -+ kfree(q->dep); -+ if(q->next) -+ kfree(q->next); -+ if(q->allot) -+ kfree(q->allot); -+ if(q->hash) -+ kfree(q->hash); -+ if(q->qs) -+ kfree(q->qs); -+} -+ -+static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb) -+{ -+ struct esfq_sched_data *q = qdisc_priv(sch); -+ unsigned char *b = skb->tail; -+ struct tc_esfq_qopt opt; -+ -+ opt.quantum = q->quantum; -+ opt.perturb_period = q->perturb_period/HZ; -+ -+ opt.limit = q->limit; -+ opt.divisor = q->hash_divisor; -+ opt.flows = q->depth; -+ opt.hash_kind = q->hash_kind; -+ -+ RTA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt); -+ -+ return skb->len; -+ -+rtattr_failure: -+ skb_trim(skb, b - skb->data); -+ return -1; -+} -+ -+static struct Qdisc_ops esfq_qdisc_ops = -+{ -+ .next = NULL, -+ .cl_ops = NULL, -+ .id = "esfq", -+ .priv_size = sizeof(struct esfq_sched_data), -+ .enqueue = esfq_enqueue, -+ .dequeue = esfq_dequeue, -+ .requeue = esfq_requeue, -+ .drop = esfq_drop, -+ .init = esfq_init, -+ .reset = esfq_reset, -+ .destroy = esfq_destroy, -+ .change = NULL, /* esfq_change - needs more work */ -+ .dump = esfq_dump, -+ .owner = THIS_MODULE, -+}; -+ -+static int __init esfq_module_init(void) -+{ -+ return register_qdisc(&esfq_qdisc_ops); -+} -+static void __exit esfq_module_exit(void) -+{ -+ unregister_qdisc(&esfq_qdisc_ops); -+} -+module_init(esfq_module_init) -+module_exit(esfq_module_exit) -+MODULE_LICENSE("GPL"); diff --git a/target/linux/etrax/patches/generic_2.6/201-multiple_default_gateways.patch b/target/linux/etrax/patches/generic_2.6/201-multiple_default_gateways.patch deleted file mode 100644 index 4a3e327288..0000000000 --- a/target/linux/etrax/patches/generic_2.6/201-multiple_default_gateways.patch +++ /dev/null @@ -1,1243 +0,0 @@ -diff -urN linux-2.6.19.old/include/linux/netfilter_ipv4/ip_nat.h linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_nat.h ---- linux-2.6.19.old/include/linux/netfilter_ipv4/ip_nat.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/netfilter_ipv4/ip_nat.h 2006-12-14 03:13:53.000000000 +0100 -@@ -63,6 +63,13 @@ - - struct ip_conntrack; - -+/* Call input routing for SNAT-ed traffic */ -+extern unsigned int ip_nat_route_input(unsigned int hooknum, -+ struct sk_buff **pskb, -+ const struct net_device *in, -+ const struct net_device *out, -+ int (*okfn)(struct sk_buff *)); -+ - /* Set up the info structure to map into this range. */ - extern unsigned int ip_nat_setup_info(struct ip_conntrack *conntrack, - const struct ip_nat_range *range, -diff -urN linux-2.6.19.old/include/linux/rtnetlink.h linux-2.6.19.dev/include/linux/rtnetlink.h ---- linux-2.6.19.old/include/linux/rtnetlink.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/rtnetlink.h 2006-12-14 03:13:53.000000000 +0100 -@@ -293,6 +293,8 @@ - #define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ - #define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ - #define RTNH_F_ONLINK 4 /* Gateway is forced on link */ -+#define RTNH_F_SUSPECT 8 /* We don't know the real state */ -+#define RTNH_F_BADSTATE (RTNH_F_DEAD | RTNH_F_SUSPECT) - - /* Macros to handle hexthops */ - -diff -urN linux-2.6.19.old/include/net/flow.h linux-2.6.19.dev/include/net/flow.h ---- linux-2.6.19.old/include/net/flow.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/net/flow.h 2006-12-14 03:13:53.000000000 +0100 -@@ -19,6 +19,8 @@ - __be32 daddr; - __be32 saddr; - __u32 fwmark; -+ __u32 lsrc; -+ __u32 gw; - __u8 tos; - __u8 scope; - } ip4_u; -@@ -48,6 +50,8 @@ - #define fl4_dst nl_u.ip4_u.daddr - #define fl4_src nl_u.ip4_u.saddr - #define fl4_fwmark nl_u.ip4_u.fwmark -+#define fl4_lsrc nl_u.ip4_u.lsrc -+#define fl4_gw nl_u.ip4_u.gw - #define fl4_tos nl_u.ip4_u.tos - #define fl4_scope nl_u.ip4_u.scope - -diff -urN linux-2.6.19.old/include/net/ip_fib.h linux-2.6.19.dev/include/net/ip_fib.h ---- linux-2.6.19.old/include/net/ip_fib.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/net/ip_fib.h 2006-12-14 03:13:53.000000000 +0100 -@@ -196,7 +196,8 @@ - - static inline void fib_select_default(const struct flowi *flp, struct fib_result *res) - { -- if (FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) -+ if ((FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) || -+ FIB_RES_NH(*res).nh_scope == RT_SCOPE_HOST) - ip_fib_main_table->tb_select_default(ip_fib_main_table, flp, res); - } - -@@ -212,6 +213,8 @@ - - #endif /* CONFIG_IP_MULTIPLE_TABLES */ - -+extern int fib_result_table(struct fib_result *res); -+ - /* Exported by fib_frontend.c */ - extern struct nla_policy rtm_ipv4_policy[]; - extern void ip_fib_init(void); -@@ -284,4 +287,6 @@ - extern void fib_proc_exit(void); - #endif - -+extern rwlock_t fib_nhflags_lock; -+ - #endif /* _NET_FIB_H */ -diff -urN linux-2.6.19.old/include/net/route.h linux-2.6.19.dev/include/net/route.h ---- linux-2.6.19.old/include/net/route.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/net/route.h 2006-12-14 03:13:53.000000000 +0100 -@@ -117,6 +117,7 @@ - extern int ip_route_output_key(struct rtable **, struct flowi *flp); - extern int ip_route_output_flow(struct rtable **rp, struct flowi *flp, struct sock *sk, int flags); - extern int ip_route_input(struct sk_buff*, __be32 dst, __be32 src, u8 tos, struct net_device *devin); -+extern int ip_route_input_lookup(struct sk_buff*, u32 dst, u32 src, u8 tos, struct net_device *devin, u32 lsrc); - extern unsigned short ip_rt_frag_needed(struct iphdr *iph, unsigned short new_mtu); - extern void ip_rt_send_redirect(struct sk_buff *skb); - -diff -urN linux-2.6.19.old/net/ipv4/fib_frontend.c linux-2.6.19.dev/net/ipv4/fib_frontend.c ---- linux-2.6.19.old/net/ipv4/fib_frontend.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/fib_frontend.c 2006-12-14 03:13:53.000000000 +0100 -@@ -58,6 +58,8 @@ - #define FIB_TABLE_HASHSZ 1 - static struct hlist_head fib_table_hash[FIB_TABLE_HASHSZ]; - -+#define FIB_RES_TABLE(r) (RT_TABLE_MAIN) -+ - #else - - #define FIB_TABLE_HASHSZ 256 -@@ -100,6 +102,9 @@ - rcu_read_unlock(); - return NULL; - } -+ -+#define FIB_RES_TABLE(r) (fib_result_table(r)) -+ - #endif /* CONFIG_IP_MULTIPLE_TABLES */ - - static void fib_flush(void) -@@ -190,6 +195,9 @@ - .tos = tos } }, - .iif = oif }; - struct fib_result res; -+ int table; -+ unsigned char prefixlen; -+ unsigned char scope; - int no_addr, rpf; - int ret; - -@@ -211,31 +219,35 @@ - goto e_inval_res; - *spec_dst = FIB_RES_PREFSRC(res); - fib_combine_itag(itag, &res); --#ifdef CONFIG_IP_ROUTE_MULTIPATH -- if (FIB_RES_DEV(res) == dev || res.fi->fib_nhs > 1) --#else - if (FIB_RES_DEV(res) == dev) --#endif - { - ret = FIB_RES_NH(res).nh_scope >= RT_SCOPE_HOST; - fib_res_put(&res); - return ret; - } -+ table = FIB_RES_TABLE(&res); -+ prefixlen = res.prefixlen; -+ scope = res.scope; - fib_res_put(&res); - if (no_addr) - goto last_resort; -- if (rpf) -- goto e_inval; - fl.oif = dev->ifindex; - - ret = 0; - if (fib_lookup(&fl, &res) == 0) { -- if (res.type == RTN_UNICAST) { -+ if (res.type == RTN_UNICAST && -+ ((table == FIB_RES_TABLE(&res) && -+ res.prefixlen >= prefixlen && res.scope >= scope) || -+ !rpf)) { - *spec_dst = FIB_RES_PREFSRC(res); - ret = FIB_RES_NH(res).nh_scope >= RT_SCOPE_HOST; -+ fib_res_put(&res); -+ return ret; - } - fib_res_put(&res); - } -+ if (rpf) -+ goto e_inval; - return ret; - - last_resort: -@@ -836,9 +848,7 @@ - switch (event) { - case NETDEV_UP: - fib_add_ifaddr(ifa); --#ifdef CONFIG_IP_ROUTE_MULTIPATH - fib_sync_up(ifa->ifa_dev->dev); --#endif - rt_cache_flush(-1); - break; - case NETDEV_DOWN: -@@ -874,9 +884,7 @@ - for_ifa(in_dev) { - fib_add_ifaddr(ifa); - } endfor_ifa(in_dev); --#ifdef CONFIG_IP_ROUTE_MULTIPATH - fib_sync_up(dev); --#endif - rt_cache_flush(-1); - break; - case NETDEV_DOWN: -diff -urN linux-2.6.19.old/net/ipv4/fib_hash.c linux-2.6.19.dev/net/ipv4/fib_hash.c ---- linux-2.6.19.old/net/ipv4/fib_hash.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/fib_hash.c 2006-12-14 03:13:53.000000000 +0100 -@@ -275,30 +275,38 @@ - return err; - } - --static int fn_hash_last_dflt=-1; -- - static void - fn_hash_select_default(struct fib_table *tb, const struct flowi *flp, struct fib_result *res) - { -- int order, last_idx; -+ int order, last_idx, last_dflt, last_nhsel; -+ struct fib_alias *first_fa = NULL; -+ struct hlist_head *head; - struct hlist_node *node; - struct fib_node *f; - struct fib_info *fi = NULL; - struct fib_info *last_resort; - struct fn_hash *t = (struct fn_hash*)tb->tb_data; -- struct fn_zone *fz = t->fn_zones[0]; -+ struct fn_zone *fz = t->fn_zones[res->prefixlen]; -+ u32 k; - - if (fz == NULL) - return; - -+ k = fz_key(flp->fl4_dst, fz); -+ last_dflt = -2; -+ last_nhsel = 0; - last_idx = -1; - last_resort = NULL; - order = -1; - - read_lock(&fib_hash_lock); -- hlist_for_each_entry(f, node, &fz->fz_hash[0], fn_hash) { -+ head = &fz->fz_hash[fn_hash(k, fz)]; -+ hlist_for_each_entry(f, node, head, fn_hash) { - struct fib_alias *fa; - -+ if (f->fn_key != k) -+ continue; -+ - list_for_each_entry(fa, &f->fn_alias, fa_list) { - struct fib_info *next_fi = fa->fa_info; - -@@ -306,41 +314,52 @@ - fa->fa_type != RTN_UNICAST) - continue; - -+ if (fa->fa_tos && -+ fa->fa_tos != flp->fl4_tos) -+ continue; - if (next_fi->fib_priority > res->fi->fib_priority) - break; -- if (!next_fi->fib_nh[0].nh_gw || -- next_fi->fib_nh[0].nh_scope != RT_SCOPE_LINK) -- continue; - fa->fa_state |= FA_S_ACCESSED; - -- if (fi == NULL) { -- if (next_fi != res->fi) -- break; -- } else if (!fib_detect_death(fi, order, &last_resort, -- &last_idx, &fn_hash_last_dflt)) { -+ if (!first_fa) { -+ last_dflt = fa->fa_last_dflt; -+ first_fa = fa; -+ } -+ if (fi && !fib_detect_death(fi, order, &last_resort, -+ &last_idx, &last_dflt, &last_nhsel, flp)) { - if (res->fi) - fib_info_put(res->fi); - res->fi = fi; - atomic_inc(&fi->fib_clntref); -- fn_hash_last_dflt = order; -+ first_fa->fa_last_dflt = order; - goto out; - } - fi = next_fi; - order++; - } -+ break; - } - - if (order <= 0 || fi == NULL) { -- fn_hash_last_dflt = -1; -+ if (fi && fi->fib_nhs > 1 && -+ fib_detect_death(fi, order, &last_resort, &last_idx, -+ &last_dflt, &last_nhsel, flp) && -+ last_resort == fi) { -+ read_lock_bh(&fib_nhflags_lock); -+ fi->fib_nh[last_nhsel].nh_flags &= ~RTNH_F_SUSPECT; -+ read_unlock_bh(&fib_nhflags_lock); -+ } -+ if (first_fa) first_fa->fa_last_dflt = -1; - goto out; - } - -- if (!fib_detect_death(fi, order, &last_resort, &last_idx, &fn_hash_last_dflt)) { -+ if (!fib_detect_death(fi, order, &last_resort, &last_idx, -+ &last_dflt, &last_nhsel, flp)) { - if (res->fi) - fib_info_put(res->fi); - res->fi = fi; - atomic_inc(&fi->fib_clntref); -- fn_hash_last_dflt = order; -+ first_fa->fa_last_dflt = order; - goto out; - } - -@@ -350,8 +369,11 @@ - res->fi = last_resort; - if (last_resort) - atomic_inc(&last_resort->fib_clntref); -+ read_lock_bh(&fib_nhflags_lock); -+ last_resort->fib_nh[last_nhsel].nh_flags &= ~RTNH_F_SUSPECT; -+ read_unlock_bh(&fib_nhflags_lock); -+ first_fa->fa_last_dflt = last_idx; - } -- fn_hash_last_dflt = last_idx; - out: - read_unlock(&fib_hash_lock); - } -@@ -447,6 +469,7 @@ - write_lock_bh(&fib_hash_lock); - fi_drop = fa->fa_info; - fa->fa_info = fi; -+ fa->fa_last_dflt = -1; - fa->fa_type = cfg->fc_type; - fa->fa_scope = cfg->fc_scope; - state = fa->fa_state; -@@ -506,6 +529,7 @@ - new_fa->fa_type = cfg->fc_type; - new_fa->fa_scope = cfg->fc_scope; - new_fa->fa_state = 0; -+ new_fa->fa_last_dflt = -1; - - /* - * Insert new entry to the list. -diff -urN linux-2.6.19.old/net/ipv4/fib_lookup.h linux-2.6.19.dev/net/ipv4/fib_lookup.h ---- linux-2.6.19.old/net/ipv4/fib_lookup.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/fib_lookup.h 2006-12-14 03:13:53.000000000 +0100 -@@ -9,6 +9,7 @@ - struct list_head fa_list; - struct rcu_head rcu; - struct fib_info *fa_info; -+ int fa_last_dflt; - u8 fa_tos; - u8 fa_type; - u8 fa_scope; -@@ -35,6 +36,7 @@ - u8 tos, u32 prio); - extern int fib_detect_death(struct fib_info *fi, int order, - struct fib_info **last_resort, -- int *last_idx, int *dflt); -+ int *last_idx, int *dflt, int *last_nhsel, -+ const struct flowi *flp); - - #endif /* _FIB_LOOKUP_H */ -diff -urN linux-2.6.19.old/net/ipv4/fib_rules.c linux-2.6.19.dev/net/ipv4/fib_rules.c ---- linux-2.6.19.old/net/ipv4/fib_rules.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/fib_rules.c 2006-12-14 03:13:53.000000000 +0100 -@@ -89,6 +89,11 @@ - } - #endif - -+int fib_result_table(struct fib_result *res) -+{ -+ return res->r->table; -+} -+ - int fib_lookup(struct flowi *flp, struct fib_result *res) - { - struct fib_lookup_arg arg = { -@@ -140,7 +145,8 @@ - void fib_select_default(const struct flowi *flp, struct fib_result *res) - { - if (res->r && res->r->action == FR_ACT_TO_TBL && -- FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) { -+ ((FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) || -+ FIB_RES_NH(*res).nh_scope == RT_SCOPE_HOST)) { - struct fib_table *tb; - if ((tb = fib_get_table(res->r->table)) != NULL) - tb->tb_select_default(tb, flp, res); -diff -urN linux-2.6.19.old/net/ipv4/fib_semantics.c linux-2.6.19.dev/net/ipv4/fib_semantics.c ---- linux-2.6.19.old/net/ipv4/fib_semantics.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/fib_semantics.c 2006-12-14 03:13:53.000000000 +0100 -@@ -55,6 +55,7 @@ - static struct hlist_head *fib_info_laddrhash; - static unsigned int fib_hash_size; - static unsigned int fib_info_cnt; -+rwlock_t fib_nhflags_lock = RW_LOCK_UNLOCKED; - - #define DEVINDEX_HASHBITS 8 - #define DEVINDEX_HASHSIZE (1U << DEVINDEX_HASHBITS) -@@ -190,7 +191,7 @@ - #ifdef CONFIG_NET_CLS_ROUTE - nh->nh_tclassid != onh->nh_tclassid || - #endif -- ((nh->nh_flags^onh->nh_flags)&~RTNH_F_DEAD)) -+ ((nh->nh_flags^onh->nh_flags)&~RTNH_F_BADSTATE)) - return -1; - onh++; - } endfor_nexthops(fi); -@@ -227,7 +228,7 @@ - nfi->fib_priority == fi->fib_priority && - memcmp(nfi->fib_metrics, fi->fib_metrics, - sizeof(fi->fib_metrics)) == 0 && -- ((nfi->fib_flags^fi->fib_flags)&~RTNH_F_DEAD) == 0 && -+ ((nfi->fib_flags^fi->fib_flags)&~RTNH_F_BADSTATE) == 0 && - (nfi->fib_nhs == 0 || nh_comp(fi, nfi) == 0)) - return fi; - } -@@ -319,26 +320,70 @@ - } - - int fib_detect_death(struct fib_info *fi, int order, -- struct fib_info **last_resort, int *last_idx, int *dflt) -+ struct fib_info **last_resort, int *last_idx, int *dflt, -+ int *last_nhsel, const struct flowi *flp) - { - struct neighbour *n; -- int state = NUD_NONE; -+ int nhsel; -+ int state; -+ struct fib_nh * nh; -+ u32 dst; -+ int flag, dead = 1; -+ -+ /* change_nexthops(fi) { */ -+ for (nhsel = 0, nh = fi->fib_nh; nhsel < fi->fib_nhs; nh++, nhsel++) { -+ if (flp->oif && flp->oif != nh->nh_oif) -+ continue; -+ if (flp->fl4_gw && flp->fl4_gw != nh->nh_gw && nh->nh_gw && -+ nh->nh_scope == RT_SCOPE_LINK) -+ continue; -+ if (nh->nh_flags & RTNH_F_DEAD) -+ continue; - -- n = neigh_lookup(&arp_tbl, &fi->fib_nh[0].nh_gw, fi->fib_dev); -- if (n) { -- state = n->nud_state; -- neigh_release(n); -- } -- if (state==NUD_REACHABLE) -- return 0; -- if ((state&NUD_VALID) && order != *dflt) -- return 0; -- if ((state&NUD_VALID) || -- (*last_idx<0 && order > *dflt)) { -- *last_resort = fi; -- *last_idx = order; -+ flag = 0; -+ if (nh->nh_dev->flags & IFF_NOARP) { -+ dead = 0; -+ goto setfl; -+ } -+ -+ dst = nh->nh_gw; -+ if (!nh->nh_gw || nh->nh_scope != RT_SCOPE_LINK) -+ dst = flp->fl4_dst; -+ -+ state = NUD_NONE; -+ n = neigh_lookup(&arp_tbl, &dst, nh->nh_dev); -+ if (n) { -+ state = n->nud_state; -+ neigh_release(n); -+ } -+ if (state==NUD_REACHABLE || -+ ((state&NUD_VALID) && order != *dflt)) { -+ dead = 0; -+ goto setfl; -+ } -+ if (!(state&NUD_VALID)) -+ flag = 1; -+ if (!dead) -+ goto setfl; -+ if ((state&NUD_VALID) || -+ (*last_idx<0 && order >= *dflt)) { -+ *last_resort = fi; -+ *last_idx = order; -+ *last_nhsel = nhsel; -+ } -+ -+ setfl: -+ -+ read_lock_bh(&fib_nhflags_lock); -+ if (flag) -+ nh->nh_flags |= RTNH_F_SUSPECT; -+ else -+ nh->nh_flags &= ~RTNH_F_SUSPECT; -+ read_unlock_bh(&fib_nhflags_lock); - } -- return 1; -+ /* } endfor_nexthops(fi) */ -+ -+ return dead; - } - - #ifdef CONFIG_IP_ROUTE_MULTIPATH -@@ -508,8 +553,11 @@ - return -EINVAL; - if ((dev = __dev_get_by_index(nh->nh_oif)) == NULL) - return -ENODEV; -- if (!(dev->flags&IFF_UP)) -- return -ENETDOWN; -+ if (!(dev->flags&IFF_UP)) { -+ if (fi->fib_protocol != RTPROT_STATIC) -+ return -ENETDOWN; -+ nh->nh_flags |= RTNH_F_DEAD; -+ } - nh->nh_dev = dev; - dev_hold(dev); - nh->nh_scope = RT_SCOPE_LINK; -@@ -529,24 +577,48 @@ - /* It is not necessary, but requires a bit of thinking */ - if (fl.fl4_scope < RT_SCOPE_LINK) - fl.fl4_scope = RT_SCOPE_LINK; -- if ((err = fib_lookup(&fl, &res)) != 0) -- return err; -+ err = fib_lookup(&fl, &res); - } -- err = -EINVAL; -- if (res.type != RTN_UNICAST && res.type != RTN_LOCAL) -- goto out; -- nh->nh_scope = res.scope; -- nh->nh_oif = FIB_RES_OIF(res); -- if ((nh->nh_dev = FIB_RES_DEV(res)) == NULL) -- goto out; -- dev_hold(nh->nh_dev); -- err = -ENETDOWN; -- if (!(nh->nh_dev->flags & IFF_UP)) -- goto out; -- err = 0; -+ if (err) { -+ struct in_device *in_dev; -+ -+ if (err != -ENETUNREACH || -+ fi->fib_protocol != RTPROT_STATIC) -+ return err; -+ -+ in_dev = inetdev_by_index(nh->nh_oif); -+ if (in_dev == NULL || -+ in_dev->dev->flags & IFF_UP) { -+ if (in_dev) -+ in_dev_put(in_dev); -+ return err; -+ } -+ nh->nh_flags |= RTNH_F_DEAD; -+ nh->nh_scope = RT_SCOPE_LINK; -+ nh->nh_dev = in_dev->dev; -+ dev_hold(nh->nh_dev); -+ in_dev_put(in_dev); -+ } else { -+ err = -EINVAL; -+ if (res.type != RTN_UNICAST && res.type != RTN_LOCAL) -+ goto out; -+ nh->nh_scope = res.scope; -+ nh->nh_oif = FIB_RES_OIF(res); -+ if ((nh->nh_dev = FIB_RES_DEV(res)) == NULL) -+ goto out; -+ dev_hold(nh->nh_dev); -+ if (!(nh->nh_dev->flags & IFF_UP)) { -+ if (fi->fib_protocol != RTPROT_STATIC) { -+ err = -ENETDOWN; -+ goto out; -+ } -+ nh->nh_flags |= RTNH_F_DEAD; -+ } -+ err = 0; - out: -- fib_res_put(&res); -- return err; -+ fib_res_put(&res); -+ return err; -+ } - } else { - struct in_device *in_dev; - -@@ -557,8 +629,11 @@ - if (in_dev == NULL) - return -ENODEV; - if (!(in_dev->dev->flags&IFF_UP)) { -- in_dev_put(in_dev); -- return -ENETDOWN; -+ if (fi->fib_protocol != RTPROT_STATIC) { -+ in_dev_put(in_dev); -+ return -ENETDOWN; -+ } -+ nh->nh_flags |= RTNH_F_DEAD; - } - nh->nh_dev = in_dev->dev; - dev_hold(nh->nh_dev); -@@ -881,8 +956,12 @@ - for_nexthops(fi) { - if (nh->nh_flags&RTNH_F_DEAD) - continue; -- if (!flp->oif || flp->oif == nh->nh_oif) -- break; -+ if (flp->oif && flp->oif != nh->nh_oif) -+ continue; -+ if (flp->fl4_gw && flp->fl4_gw != nh->nh_gw && -+ nh->nh_gw && nh->nh_scope == RT_SCOPE_LINK) -+ continue; -+ break; - } - #ifdef CONFIG_IP_ROUTE_MULTIPATH - if (nhsel < fi->fib_nhs) { -@@ -1056,18 +1135,29 @@ - prev_fi = fi; - dead = 0; - change_nexthops(fi) { -- if (nh->nh_flags&RTNH_F_DEAD) -- dead++; -- else if (nh->nh_dev == dev && -- nh->nh_scope != scope) { -- nh->nh_flags |= RTNH_F_DEAD; -+ if (nh->nh_flags&RTNH_F_DEAD) { -+ if (fi->fib_protocol!=RTPROT_STATIC || -+ nh->nh_dev == NULL || -+ __in_dev_get_rtnl(nh->nh_dev) == NULL || -+ nh->nh_dev->flags&IFF_UP) -+ dead++; -+ } else if (nh->nh_dev == dev && -+ nh->nh_scope != scope) { -+ write_lock_bh(&fib_nhflags_lock); - #ifdef CONFIG_IP_ROUTE_MULTIPATH -- spin_lock_bh(&fib_multipath_lock); -+ spin_lock(&fib_multipath_lock); -+ nh->nh_flags |= RTNH_F_DEAD; - fi->fib_power -= nh->nh_power; - nh->nh_power = 0; -- spin_unlock_bh(&fib_multipath_lock); -+ spin_unlock(&fib_multipath_lock); -+#else -+ nh->nh_flags |= RTNH_F_DEAD; - #endif -- dead++; -+ write_unlock_bh(&fib_nhflags_lock); -+ if (fi->fib_protocol!=RTPROT_STATIC || -+ force || -+ __in_dev_get_rtnl(dev) == NULL) -+ dead++; - } - #ifdef CONFIG_IP_ROUTE_MULTIPATH - if (force > 1 && nh->nh_dev == dev) { -@@ -1086,11 +1176,8 @@ - return ret; - } - --#ifdef CONFIG_IP_ROUTE_MULTIPATH -- - /* -- Dead device goes up. We wake up dead nexthops. -- It takes sense only on multipath routes. -+ Dead device goes up or new address is added. We wake up dead nexthops. - */ - - int fib_sync_up(struct net_device *dev) -@@ -1100,8 +1187,10 @@ - struct hlist_head *head; - struct hlist_node *node; - struct fib_nh *nh; -- int ret; -+ struct fib_result res; -+ int ret, rep; - -+repeat: - if (!(dev->flags&IFF_UP)) - return 0; - -@@ -1109,6 +1198,7 @@ - hash = fib_devindex_hashfn(dev->ifindex); - head = &fib_info_devhash[hash]; - ret = 0; -+ rep = 0; - - hlist_for_each_entry(nh, node, head, nh_hash) { - struct fib_info *fi = nh->nh_parent; -@@ -1121,19 +1211,37 @@ - prev_fi = fi; - alive = 0; - change_nexthops(fi) { -- if (!(nh->nh_flags&RTNH_F_DEAD)) { -- alive++; -+ if (!(nh->nh_flags&RTNH_F_DEAD)) - continue; -- } - if (nh->nh_dev == NULL || !(nh->nh_dev->flags&IFF_UP)) - continue; - if (nh->nh_dev != dev || !__in_dev_get_rtnl(dev)) - continue; -+ if (nh->nh_gw && fi->fib_protocol == RTPROT_STATIC) { -+ struct flowi fl = { -+ .nl_u = { .ip4_u = -+ { .daddr = nh->nh_gw, -+ .scope = nh->nh_scope } }, -+ .oif = nh->nh_oif, -+ }; -+ if (fib_lookup(&fl, &res) != 0) -+ continue; -+ if (res.type != RTN_UNICAST && -+ res.type != RTN_LOCAL) { -+ fib_res_put(&res); -+ continue; -+ } -+ nh->nh_scope = res.scope; -+ fib_res_put(&res); -+ rep = 1; -+ } - alive++; -+#ifdef CONFIG_IP_ROUTE_MULTIPATH - spin_lock_bh(&fib_multipath_lock); - nh->nh_power = 0; - nh->nh_flags &= ~RTNH_F_DEAD; - spin_unlock_bh(&fib_multipath_lock); -+#endif - } endfor_nexthops(fi) - - if (alive > 0) { -@@ -1141,10 +1249,14 @@ - ret++; - } - } -+ if (rep) -+ goto repeat; - - return ret; - } - -+#ifdef CONFIG_IP_ROUTE_MULTIPATH -+ - /* - The algorithm is suboptimal, but it provides really - fair weighted route distribution. -@@ -1153,24 +1265,45 @@ - void fib_select_multipath(const struct flowi *flp, struct fib_result *res) - { - struct fib_info *fi = res->fi; -- int w; -+ int w, alive; - - spin_lock_bh(&fib_multipath_lock); -+ if (flp->oif) { -+ int sel = -1; -+ w = -1; -+ change_nexthops(fi) { -+ if (flp->oif != nh->nh_oif) -+ continue; -+ if (flp->fl4_gw && flp->fl4_gw != nh->nh_gw && -+ nh->nh_gw && nh->nh_scope == RT_SCOPE_LINK) -+ continue; -+ if (!(nh->nh_flags&RTNH_F_BADSTATE)) { -+ if (nh->nh_power > w) { -+ w = nh->nh_power; -+ sel = nhsel; -+ } -+ } -+ } endfor_nexthops(fi); -+ if (sel >= 0) { -+ spin_unlock_bh(&fib_multipath_lock); -+ res->nh_sel = sel; -+ return; -+ } -+ goto last_resort; -+ } -+ -+repeat: - if (fi->fib_power <= 0) { - int power = 0; - change_nexthops(fi) { -- if (!(nh->nh_flags&RTNH_F_DEAD)) { -+ if (!(nh->nh_flags&RTNH_F_BADSTATE)) { - power += nh->nh_weight; - nh->nh_power = nh->nh_weight; - } - } endfor_nexthops(fi); - fi->fib_power = power; -- if (power <= 0) { -- spin_unlock_bh(&fib_multipath_lock); -- /* Race condition: route has just become dead. */ -- res->nh_sel = 0; -- return; -- } -+ if (power <= 0) -+ goto last_resort; - } - - -@@ -1180,20 +1313,40 @@ - - w = jiffies % fi->fib_power; - -+ alive = 0; - change_nexthops(fi) { -- if (!(nh->nh_flags&RTNH_F_DEAD) && nh->nh_power) { -+ if (!(nh->nh_flags&RTNH_F_BADSTATE) && nh->nh_power) { - if ((w -= nh->nh_power) <= 0) { - nh->nh_power--; - fi->fib_power--; -- res->nh_sel = nhsel; - spin_unlock_bh(&fib_multipath_lock); -+ res->nh_sel = nhsel; - return; - } -+ alive = 1; -+ } -+ } endfor_nexthops(fi); -+ if (alive) { -+ fi->fib_power = 0; -+ goto repeat; -+ } -+ -+last_resort: -+ -+ for_nexthops(fi) { -+ if (!(nh->nh_flags&RTNH_F_DEAD)) { -+ if (flp->oif && flp->oif != nh->nh_oif) -+ continue; -+ if (flp->fl4_gw && flp->fl4_gw != nh->nh_gw && -+ nh->nh_gw && nh->nh_scope == RT_SCOPE_LINK) -+ continue; -+ spin_unlock_bh(&fib_multipath_lock); -+ res->nh_sel = nhsel; -+ return; - } - } endfor_nexthops(fi); - - /* Race condition: route has just become dead. */ -- res->nh_sel = 0; - spin_unlock_bh(&fib_multipath_lock); - } - #endif -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ip_nat_core.c linux-2.6.19.dev/net/ipv4/netfilter/ip_nat_core.c ---- linux-2.6.19.old/net/ipv4/netfilter/ip_nat_core.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ip_nat_core.c 2006-12-14 03:13:53.000000000 +0100 -@@ -573,6 +573,53 @@ - EXPORT_SYMBOL_GPL(ip_nat_port_range_to_nfattr); - #endif - -+unsigned int -+ip_nat_route_input(unsigned int hooknum, -+ struct sk_buff **pskb, -+ const struct net_device *in, -+ const struct net_device *out, -+ int (*okfn)(struct sk_buff *)) -+{ -+ struct sk_buff *skb = *pskb; -+ struct iphdr *iph; -+ struct ip_conntrack *conn; -+ enum ip_conntrack_info ctinfo; -+ enum ip_conntrack_dir dir; -+ unsigned long statusbit; -+ u32 saddr; -+ -+ if (!(conn = ip_conntrack_get(skb, &ctinfo))) -+ return NF_ACCEPT; -+ -+ if (!(conn->status & IPS_NAT_DONE_MASK)) -+ return NF_ACCEPT; -+ dir = CTINFO2DIR(ctinfo); -+ statusbit = IPS_SRC_NAT; -+ if (dir == IP_CT_DIR_REPLY) -+ statusbit ^= IPS_NAT_MASK; -+ if (!(conn->status & statusbit)) -+ return NF_ACCEPT; -+ -+ if (skb->dst) -+ return NF_ACCEPT; -+ -+ if (skb->len < sizeof(struct iphdr)) -+ return NF_ACCEPT; -+ -+ /* use daddr in other direction as masquerade address (lsrc) */ -+ iph = skb->nh.iph; -+ saddr = conn->tuplehash[!dir].tuple.dst.ip; -+ if (saddr == iph->saddr) -+ return NF_ACCEPT; -+ -+ if (ip_route_input_lookup(skb, iph->daddr, iph->saddr, iph->tos, -+ skb->dev, saddr)) -+ return NF_DROP; -+ -+ return NF_ACCEPT; -+} -+EXPORT_SYMBOL_GPL(ip_nat_route_input); -+ - static int __init ip_nat_init(void) - { - size_t i; -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ip_nat_standalone.c linux-2.6.19.dev/net/ipv4/netfilter/ip_nat_standalone.c ---- linux-2.6.19.old/net/ipv4/netfilter/ip_nat_standalone.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ip_nat_standalone.c 2006-12-14 03:13:53.000000000 +0100 -@@ -325,6 +325,14 @@ - .hooknum = NF_IP_LOCAL_OUT, - .priority = NF_IP_PRI_NAT_DST, - }, -+ /* Before routing, route before mangling */ -+ { -+ .hook = ip_nat_route_input, -+ .owner = THIS_MODULE, -+ .pf = PF_INET, -+ .hooknum = NF_IP_PRE_ROUTING, -+ .priority = NF_IP_PRI_LAST-1, -+ }, - /* After packet filtering, change source */ - { - .hook = ip_nat_fn, -diff -urN linux-2.6.19.old/net/ipv4/netfilter/ipt_MASQUERADE.c linux-2.6.19.dev/net/ipv4/netfilter/ipt_MASQUERADE.c ---- linux-2.6.19.old/net/ipv4/netfilter/ipt_MASQUERADE.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/netfilter/ipt_MASQUERADE.c 2006-12-14 03:13:53.000000000 +0100 -@@ -85,13 +85,31 @@ - return NF_ACCEPT; - - mr = targinfo; -- rt = (struct rtable *)(*pskb)->dst; -- newsrc = inet_select_addr(out, rt->rt_gateway, RT_SCOPE_UNIVERSE); -- if (!newsrc) { -- printk("MASQUERADE: %s ate my IP address\n", out->name); -- return NF_DROP; -+ -+ { -+ struct flowi fl = { .nl_u = { .ip4_u = -+ { .daddr = (*pskb)->nh.iph->daddr, -+ .tos = (RT_TOS((*pskb)->nh.iph->tos) | -+ RTO_CONN), -+ .gw = ((struct rtable *) (*pskb)->dst)->rt_gateway, -+#ifdef CONFIG_IP_ROUTE_FWMARK -+ .fwmark = (*pskb)->nfmark -+#endif -+ } }, -+ .oif = out->ifindex }; -+ if (ip_route_output_key(&rt, &fl) != 0) { -+ /* Funky routing can do this. */ -+ if (net_ratelimit()) -+ printk("MASQUERADE:" -+ " No route: Rusty's brain broke!\n"); -+ return NF_DROP; -+ } - } - -+ newsrc = rt->rt_src; -+ DEBUGP("newsrc = %u.%u.%u.%u\n", NIPQUAD(newsrc)); -+ ip_rt_put(rt); -+ - write_lock_bh(&masq_lock); - ct->nat.masq_index = out->ifindex; - write_unlock_bh(&masq_lock); -diff -urN linux-2.6.19.old/net/ipv4/route.c linux-2.6.19.dev/net/ipv4/route.c ---- linux-2.6.19.old/net/ipv4/route.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/net/ipv4/route.c 2006-12-14 03:13:53.000000000 +0100 -@@ -1211,6 +1211,7 @@ - - /* Gateway is different ... */ - rt->rt_gateway = new_gw; -+ if (rt->fl.fl4_gw) rt->fl.fl4_gw = new_gw; - - /* Redirect received -> path was valid */ - dst_confirm(&rth->u.dst); -@@ -1647,6 +1648,7 @@ - rth->fl.fl4_fwmark= skb->nfmark; - #endif - rth->fl.fl4_src = saddr; -+ rth->fl.fl4_lsrc = 0; - rth->rt_src = saddr; - #ifdef CONFIG_NET_CLS_ROUTE - rth->u.dst.tclassid = itag; -@@ -1657,6 +1659,7 @@ - dev_hold(rth->u.dst.dev); - rth->idev = in_dev_get(rth->u.dst.dev); - rth->fl.oif = 0; -+ rth->fl.fl4_gw = 0; - rth->rt_gateway = daddr; - rth->rt_spec_dst= spec_dst; - rth->rt_type = RTN_MULTICAST; -@@ -1721,7 +1724,7 @@ - struct fib_result* res, - struct in_device *in_dev, - __be32 daddr, __be32 saddr, u32 tos, -- struct rtable **result) -+ u32 lsrc, struct rtable **result) - { - - struct rtable *rth; -@@ -1755,6 +1758,7 @@ - flags |= RTCF_DIRECTSRC; - - if (out_dev == in_dev && err && !(flags & (RTCF_NAT | RTCF_MASQ)) && -+ !lsrc && - (IN_DEV_SHARED_MEDIA(out_dev) || - inet_addr_onlink(out_dev, saddr, FIB_RES_GW(*res)))) - flags |= RTCF_DOREDIRECT; -@@ -1794,6 +1798,7 @@ - #endif - rth->fl.fl4_src = saddr; - rth->rt_src = saddr; -+ rth->fl.fl4_lsrc = lsrc; - rth->rt_gateway = daddr; - rth->rt_iif = - rth->fl.iif = in_dev->dev->ifindex; -@@ -1801,6 +1806,7 @@ - dev_hold(rth->u.dst.dev); - rth->idev = in_dev_get(rth->u.dst.dev); - rth->fl.oif = 0; -+ rth->fl.fl4_gw = 0; - rth->rt_spec_dst= spec_dst; - - rth->u.dst.input = ip_forward; -@@ -1822,19 +1828,21 @@ - struct fib_result* res, - const struct flowi *fl, - struct in_device *in_dev, -- __be32 daddr, __be32 saddr, u32 tos) -+ __be32 daddr, __be32 saddr, u32 tos, -+ u32 lsrc) - { - struct rtable* rth = NULL; - int err; - unsigned hash; - -+ fib_select_default(fl, res); - #ifdef CONFIG_IP_ROUTE_MULTIPATH -- if (res->fi && res->fi->fib_nhs > 1 && fl->oif == 0) -+ if (res->fi && res->fi->fib_nhs > 1) - fib_select_multipath(fl, res); - #endif - - /* create a routing cache entry */ -- err = __mkroute_input(skb, res, in_dev, daddr, saddr, tos, &rth); -+ err = __mkroute_input(skb, res, in_dev, daddr, saddr, tos, lsrc, &rth); - if (err) - return err; - -@@ -1847,7 +1855,8 @@ - struct fib_result* res, - const struct flowi *fl, - struct in_device *in_dev, -- __be32 daddr, __be32 saddr, u32 tos) -+ __be32 daddr, __be32 saddr, u32 tos, -+ u32 lsrc) - { - #ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED - struct rtable* rth = NULL, *rtres; -@@ -1863,7 +1872,7 @@ - /* distinguish between multipath and singlepath */ - if (hopcount < 2) - return ip_mkroute_input_def(skb, res, fl, in_dev, daddr, -- saddr, tos); -+ saddr, tos, 0); - - /* add all alternatives to the routing cache */ - for (hop = 0; hop < hopcount; hop++) { -@@ -1875,7 +1884,7 @@ - - /* create a routing cache entry */ - err = __mkroute_input(skb, res, in_dev, daddr, saddr, tos, -- &rth); -+ 0, &rth); - if (err) - return err; - -@@ -1895,7 +1904,7 @@ - skb->dst = &rtres->u.dst; - return err; - #else /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */ -- return ip_mkroute_input_def(skb, res, fl, in_dev, daddr, saddr, tos); -+ return ip_mkroute_input_def(skb, res, fl, in_dev, daddr, saddr, tos, lsrc); - #endif /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */ - } - -@@ -1911,20 +1920,20 @@ - */ - - static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr, -- u8 tos, struct net_device *dev) -+ u8 tos, struct net_device *dev, u32 lsrc) - { - struct fib_result res; - struct in_device *in_dev = in_dev_get(dev); - struct flowi fl = { .nl_u = { .ip4_u = - { .daddr = daddr, -- .saddr = saddr, -+ .saddr = lsrc? : saddr, - .tos = tos, - .scope = RT_SCOPE_UNIVERSE, - #ifdef CONFIG_IP_ROUTE_FWMARK - .fwmark = skb->nfmark - #endif - } }, -- .iif = dev->ifindex }; -+ .iif = lsrc? loopback_dev.ifindex : dev->ifindex }; - unsigned flags = 0; - u32 itag = 0; - struct rtable * rth; -@@ -1957,6 +1966,12 @@ - if (BADCLASS(daddr) || ZERONET(daddr) || LOOPBACK(daddr)) - goto martian_destination; - -+ if (lsrc) { -+ if (MULTICAST(lsrc) || BADCLASS(lsrc) || -+ ZERONET(lsrc) || LOOPBACK(lsrc)) -+ goto e_inval; -+ } -+ - /* - * Now we are ready to route packet. - */ -@@ -1966,6 +1981,10 @@ - goto no_route; - } - free_res = 1; -+ if (lsrc && res.type != RTN_UNICAST && res.type != RTN_NAT) -+ goto e_inval; -+ fl.iif = dev->ifindex; -+ fl.fl4_src = saddr; - - RT_CACHE_STAT_INC(in_slow_tot); - -@@ -1990,7 +2009,7 @@ - if (res.type != RTN_UNICAST) - goto martian_destination; - -- err = ip_mkroute_input(skb, &res, &fl, in_dev, daddr, saddr, tos); -+ err = ip_mkroute_input(skb, &res, &fl, in_dev, daddr, saddr, tos, lsrc); - if (err == -ENOBUFS) - goto e_nobufs; - if (err == -EINVAL) -@@ -2005,6 +2024,8 @@ - brd_input: - if (skb->protocol != htons(ETH_P_IP)) - goto e_inval; -+ if (lsrc) -+ goto e_inval; - - if (ZERONET(saddr)) - spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK); -@@ -2047,6 +2068,7 @@ - rth->u.dst.dev = &loopback_dev; - dev_hold(rth->u.dst.dev); - rth->idev = in_dev_get(rth->u.dst.dev); -+ rth->fl.fl4_gw = 0; - rth->rt_gateway = daddr; - rth->rt_spec_dst= spec_dst; - rth->u.dst.input= ip_local_deliver; -@@ -2096,8 +2118,9 @@ - goto e_inval; - } - --int ip_route_input(struct sk_buff *skb, __be32 daddr, __be32 saddr, -- u8 tos, struct net_device *dev) -+static inline int -+ip_route_input_cached(struct sk_buff *skb, __be32 daddr, __be32 saddr, -+ u8 tos, struct net_device *dev, u32 lsrc) - { - struct rtable * rth; - unsigned hash; -@@ -2112,6 +2135,7 @@ - if (rth->fl.fl4_dst == daddr && - rth->fl.fl4_src == saddr && - rth->fl.iif == iif && -+ rth->fl.fl4_lsrc == lsrc && - rth->fl.oif == 0 && - #ifdef CONFIG_IP_ROUTE_FWMARK - rth->fl.fl4_fwmark == skb->nfmark && -@@ -2160,7 +2184,19 @@ - rcu_read_unlock(); - return -EINVAL; - } -- return ip_route_input_slow(skb, daddr, saddr, tos, dev); -+ return ip_route_input_slow(skb, daddr, saddr, tos, dev, lsrc); -+} -+ -+int ip_route_input(struct sk_buff *skb, u32 daddr, u32 saddr, -+ u8 tos, struct net_device *dev) -+{ -+ return ip_route_input_cached(skb, daddr, saddr, tos, dev, 0); -+} -+ -+int ip_route_input_lookup(struct sk_buff *skb, u32 daddr, u32 saddr, -+ u8 tos, struct net_device *dev, u32 lsrc) -+{ -+ return ip_route_input_cached(skb, daddr, saddr, tos, dev, lsrc); - } - - static inline int __mkroute_output(struct rtable **result, -@@ -2239,6 +2275,7 @@ - rth->fl.fl4_tos = tos; - rth->fl.fl4_src = oldflp->fl4_src; - rth->fl.oif = oldflp->oif; -+ rth->fl.fl4_gw = oldflp->fl4_gw; - #ifdef CONFIG_IP_ROUTE_FWMARK - rth->fl.fl4_fwmark= oldflp->fl4_fwmark; - #endif -@@ -2381,6 +2418,7 @@ - struct flowi fl = { .nl_u = { .ip4_u = - { .daddr = oldflp->fl4_dst, - .saddr = oldflp->fl4_src, -+ .gw = oldflp->fl4_gw, - .tos = tos & IPTOS_RT_MASK, - .scope = ((tos & RTO_ONLINK) ? - RT_SCOPE_LINK : -@@ -2486,6 +2524,7 @@ - dev_out = &loopback_dev; - dev_hold(dev_out); - fl.oif = loopback_dev.ifindex; -+ fl.fl4_gw = 0; - res.type = RTN_LOCAL; - flags |= RTCF_LOCAL; - goto make_route; -@@ -2493,7 +2532,7 @@ - - if (fib_lookup(&fl, &res)) { - res.fi = NULL; -- if (oldflp->oif) { -+ if (oldflp->oif && dev_out->flags & IFF_UP) { - /* Apparently, routing tables are wrong. Assume, - that the destination is on link. - -@@ -2533,6 +2572,7 @@ - dev_out = &loopback_dev; - dev_hold(dev_out); - fl.oif = dev_out->ifindex; -+ fl.fl4_gw = 0; - if (res.fi) - fib_info_put(res.fi); - res.fi = NULL; -@@ -2540,13 +2580,12 @@ - goto make_route; - } - -+ if (res.type == RTN_UNICAST) -+ fib_select_default(&fl, &res); - #ifdef CONFIG_IP_ROUTE_MULTIPATH -- if (res.fi->fib_nhs > 1 && fl.oif == 0) -+ if (res.fi->fib_nhs > 1) - fib_select_multipath(&fl, &res); -- else - #endif -- if (!res.prefixlen && res.type == RTN_UNICAST && !fl.oif) -- fib_select_default(&fl, &res); - - if (!fl.fl4_src) - fl.fl4_src = FIB_RES_PREFSRC(res); -@@ -2583,6 +2622,7 @@ - rth->fl.fl4_src == flp->fl4_src && - rth->fl.iif == 0 && - rth->fl.oif == flp->oif && -+ rth->fl.fl4_gw == flp->fl4_gw && - #ifdef CONFIG_IP_ROUTE_FWMARK - rth->fl.fl4_fwmark == flp->fl4_fwmark && - #endif -@@ -3221,3 +3261,4 @@ - EXPORT_SYMBOL(__ip_select_ident); - EXPORT_SYMBOL(ip_route_input); - EXPORT_SYMBOL(ip_route_output_key); -+EXPORT_SYMBOL(ip_route_input_lookup); diff --git a/target/linux/etrax/patches/generic_2.6/204-jffs2_eofdetect.patch b/target/linux/etrax/patches/generic_2.6/204-jffs2_eofdetect.patch deleted file mode 100644 index 8037dd0671..0000000000 --- a/target/linux/etrax/patches/generic_2.6/204-jffs2_eofdetect.patch +++ /dev/null @@ -1,58 +0,0 @@ -diff -urN linux-2.6.19.old/fs/jffs2/build.c linux-2.6.19.dev/fs/jffs2/build.c ---- linux-2.6.19.old/fs/jffs2/build.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/fs/jffs2/build.c 2006-12-14 03:13:57.000000000 +0100 -@@ -107,6 +107,17 @@ - dbg_fsbuild("scanned flash completely\n"); - jffs2_dbg_dump_block_lists_nolock(c); - -+ if (c->flags & (1 << 7)) { -+ printk("%s(): unlocking the mtd device... ", __func__); -+ if (c->mtd->unlock) -+ c->mtd->unlock(c->mtd, 0, c->mtd->size); -+ printk("done.\n"); -+ -+ printk("%s(): erasing all blocks after the end marker... ", __func__); -+ jffs2_erase_pending_blocks(c, -1); -+ printk("done.\n"); -+ } -+ - dbg_fsbuild("pass 1 starting\n"); - c->flags |= JFFS2_SB_FLAG_BUILDING; - /* Now scan the directory tree, increasing nlink according to every dirent found. */ -diff -urN linux-2.6.19.old/fs/jffs2/scan.c linux-2.6.19.dev/fs/jffs2/scan.c ---- linux-2.6.19.old/fs/jffs2/scan.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/fs/jffs2/scan.c 2006-12-14 03:13:57.000000000 +0100 -@@ -141,9 +141,12 @@ - - /* reset summary info for next eraseblock scan */ - jffs2_sum_reset_collected(s); -- -- ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset), -- buf_size, s); -+ -+ if (c->flags & (1 << 7)) -+ ret = BLK_STATE_ALLFF; -+ else -+ ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset), -+ buf_size, s); - - if (ret < 0) - goto out; -@@ -540,6 +543,17 @@ - return err; - } - -+ if ((buf[0] == 0xde) && -+ (buf[1] == 0xad) && -+ (buf[2] == 0xc0) && -+ (buf[3] == 0xde)) { -+ /* end of filesystem. erase everything after this point */ -+ printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset); -+ c->flags |= (1 << 7); -+ -+ return BLK_STATE_ALLFF; -+ } -+ - /* We temporarily use 'ofs' as a pointer into the buffer/jeb */ - ofs = 0; - diff --git a/target/linux/etrax/patches/generic_2.6/208-rtl8110sb_fix.patch b/target/linux/etrax/patches/generic_2.6/208-rtl8110sb_fix.patch deleted file mode 100644 index 620a9daab9..0000000000 --- a/target/linux/etrax/patches/generic_2.6/208-rtl8110sb_fix.patch +++ /dev/null @@ -1,25 +0,0 @@ -diff -urN linux-2.6.19.old/drivers/net/r8169.c linux-2.6.19.dev/drivers/net/r8169.c ---- linux-2.6.19.old/drivers/net/r8169.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/drivers/net/r8169.c 2006-12-14 03:14:01.000000000 +0100 -@@ -491,7 +491,7 @@ - #endif - - static const u16 rtl8169_intr_mask = -- SYSErr | LinkChg | RxOverflow | RxFIFOOver | TxErr | TxOK | RxErr | RxOK; -+ LinkChg | RxOverflow | RxFIFOOver | TxErr | TxOK | RxErr | RxOK; - static const u16 rtl8169_napi_event = - RxOK | RxOverflow | RxFIFOOver | TxOK | TxErr; - static const unsigned int rtl8169_rx_config = -@@ -2584,10 +2584,12 @@ - if (!(status & rtl8169_intr_mask)) - break; - -+#if 0 - if (unlikely(status & SYSErr)) { - rtl8169_pcierr_interrupt(dev); - break; - } -+#endif - - if (status & LinkChg) - rtl8169_check_link_status(dev, tp, ioaddr); diff --git a/target/linux/etrax/patches/generic_2.6/209-mini_fo.patch b/target/linux/etrax/patches/generic_2.6/209-mini_fo.patch deleted file mode 100644 index a8e6d88d63..0000000000 --- a/target/linux/etrax/patches/generic_2.6/209-mini_fo.patch +++ /dev/null @@ -1,7807 +0,0 @@ -diff -urN linux-2.6.19.old/fs/Kconfig linux-2.6.19.dev/fs/Kconfig ---- linux-2.6.19.old/fs/Kconfig 2006-12-14 03:13:20.000000000 +0100 -+++ linux-2.6.19.dev/fs/Kconfig 2006-12-14 03:14:03.000000000 +0100 -@@ -468,6 +468,9 @@ - This option will enlarge your kernel, but it allows debugging of - ocfs2 filesystem issues. - -+config MINI_FO -+ tristate "Mini fanout overlay filesystem" -+ - config MINIX_FS - tristate "Minix fs support" - help -diff -urN linux-2.6.19.old/fs/Makefile linux-2.6.19.dev/fs/Makefile ---- linux-2.6.19.old/fs/Makefile 2006-12-14 03:13:20.000000000 +0100 -+++ linux-2.6.19.dev/fs/Makefile 2006-12-14 03:14:03.000000000 +0100 -@@ -71,6 +71,7 @@ - obj-$(CONFIG_RAMFS) += ramfs/ - obj-$(CONFIG_HUGETLBFS) += hugetlbfs/ - obj-$(CONFIG_CODA_FS) += coda/ -+obj-$(CONFIG_MINI_FO) += mini_fo/ - obj-$(CONFIG_MINIX_FS) += minix/ - obj-$(CONFIG_FAT_FS) += fat/ - obj-$(CONFIG_MSDOS_FS) += msdos/ -diff -urN linux-2.6.19.old/fs/mini_fo/aux.c linux-2.6.19.dev/fs/mini_fo/aux.c ---- linux-2.6.19.old/fs/mini_fo/aux.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/aux.c 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,580 @@ -+/* -+ * Copyright (c) 1997-2003 Erez Zadok -+ * Copyright (c) 2001-2003 Stony Brook University -+ * -+ * For specific licensing information, see the COPYING file distributed with -+ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING. -+ * -+ * This Copyright notice must be kept intact and distributed with all -+ * fistgen sources INCLUDING sources generated by fistgen. -+ */ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+/* -+ * $Id$ -+ */ -+ -+#ifdef HAVE_CONFIG_H -+# include -+#endif -+ -+#include "fist.h" -+#include "mini_fo.h" -+ -+/* check if file exists in storage */ -+int exists_in_storage(dentry_t *dentry) -+{ -+ check_mini_fo_dentry(dentry); -+ if(dtost(dentry) == MODIFIED || dtost(dentry) == CREATED || dtost(dentry) == DEL_REWRITTEN) -+ return 1; -+ return 0; -+} -+ -+/* check if dentry is in an existing state */ -+int is_mini_fo_existant(dentry_t *dentry) -+{ -+ check_mini_fo_dentry(dentry); -+ -+ if(dtost(dentry) == DELETED || dtost(dentry) == NON_EXISTANT) -+ return 0; -+ else -+ return 1; -+} -+ -+/* -+ * This function will create a negative storage dentry for -+ * dentry, what is required for many create like options. -+ * It will create the storage structure if necessary. -+ */ -+int get_neg_sto_dentry(dentry_t *dentry) -+{ -+ int err = 0; -+ unsigned int len; -+ const unsigned char *name; -+ -+ if(!dentry || -+ !dtopd(dentry) || -+ !(dtost(dentry) == UNMODIFIED || -+ dtost(dentry) == NON_EXISTANT || -+ dtost(dentry) == DELETED)) { -+ printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: invalid dentry passed.\n"); -+ err = -1; -+ goto out; -+ } -+ /* Have we got a neg. dentry already? */ -+ if(dtohd2(dentry)) { -+ err = 0; -+ goto out; -+ } -+ if(dtost(dentry->d_parent) == UNMODIFIED) { -+ /* build sto struct */ -+ err = build_sto_structure(dentry->d_parent->d_parent, dentry->d_parent); -+ if(err || -+ dtost(dentry->d_parent) != MODIFIED) { -+ printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: ERROR building sto structure.\n"); -+ err = -1; -+ goto out; -+ } -+ } -+ -+ len = dentry->d_name.len; -+ name = dentry->d_name.name; -+ -+ dtohd2(dentry) = -+ lookup_one_len(name, dtohd2(dentry->d_parent), len); -+ -+ out: -+ return err; -+} -+ -+int check_mini_fo_dentry(dentry_t *dentry) -+{ -+ ASSERT(dentry != NULL); -+ ASSERT(dtopd(dentry) != NULL); -+ ASSERT((dtohd(dentry) != NULL) || (dtohd2(dentry) != NULL)); -+ -+/* if(dtost(dentry) == MODIFIED) { */ -+/* ASSERT(dentry->d_inode != NULL); */ -+/* ASSERT(dtohd(dentry) != NULL); */ -+/* ASSERT(dtohd(dentry)->d_inode != NULL); */ -+/* ASSERT(dtohd2(dentry) != NULL); */ -+/* ASSERT(dtohd2(dentry)->d_inode != NULL); */ -+/* } */ -+/* else if(dtost(dentry) == UNMODIFIED) { */ -+/* ASSERT(dentry->d_inode != NULL); */ -+/* ASSERT( */ -+/* } */ -+ return 0; -+} -+ -+int check_mini_fo_file(file_t *file) -+{ -+ ASSERT(file != NULL); -+ ASSERT(ftopd(file) != NULL); -+ ASSERT(file->f_dentry != NULL); -+ -+ /* violent checking, check depending of state and type -+ * if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {} -+ */ -+ ASSERT((ftohf(file) != NULL) || (ftohf2(file) != NULL)); -+ return 0; -+} -+ -+int check_mini_fo_inode(inode_t *inode) -+{ -+ ASSERT(inode != NULL); -+ ASSERT(itopd(inode) != NULL); -+ ASSERT((itohi(inode) != NULL) || (itohi2(inode) != NULL)); -+ return 0; -+} -+ -+/* -+ * will walk a base path as provided by get_mini_fo_bpath and return -+ * the (hopefully ;-) ) positive dentry of the renamed base dir. -+ * -+ * This does some work of path_init. -+ */ -+dentry_t *bpath_walk(super_block_t *sb, char *bpath) -+{ -+ int err; -+ struct nameidata nd; -+ -+ /* be paranoid */ -+ if(!bpath || bpath[0] != '/') { -+ printk(KERN_CRIT "mini_fo: bpath_walk: Invalid string.\n"); -+ return NULL; -+ } -+ if(!sb || !stopd(sb)) { -+ printk(KERN_CRIT "mini_fo: bpath_walk: Invalid sb.\n"); -+ return NULL; -+ } -+ -+ /* setup nd as path_init does */ -+ nd.last_type = LAST_ROOT; /* if there are only slashes... */ -+ nd.flags = LOOKUP_FOLLOW; -+ /* fix this: how do I reach this lock? -+ * read_lock(¤t->fs->lock); */ -+ nd.mnt = mntget(stopd(sb)->hidden_mnt); -+ nd.dentry = dget(stopd(sb)->base_dir_dentry); -+ /* read_unlock(¤t->fs->lock); */ -+ -+ err = path_walk(bpath+1, &nd); -+ -+ /* validate */ -+ if (err || !nd.dentry || !nd.dentry->d_inode) { -+ printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n"); -+ return NULL; -+ } -+ return nd.dentry; -+} -+ -+ -+/* returns the full path of the basefile incl. its name */ -+int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len) -+{ -+ char *buf_walker; -+ int len = 0; -+ dentry_t *sky_walker; -+ -+ if(!dentry || !dtohd(dentry)) { -+ printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: invalid dentry passed.\n"); -+ return -1; -+ } -+ sky_walker = dtohd(dentry); -+ -+ do { -+ len += sky_walker->d_name.len + 1 ; /* 1 for '/' */ -+ sky_walker = sky_walker->d_parent; -+ } while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry); -+ -+ /* 1 to oil the loop */ -+ *bpath = (char*) kmalloc(len + 1, GFP_KERNEL); -+ if(!*bpath) { -+ printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: out of mem.\n"); -+ return -1; -+ } -+ buf_walker = *bpath+len; /* put it on last char */ -+ *buf_walker = '\n'; -+ sky_walker = dtohd(dentry); -+ -+ do { -+ buf_walker -= sky_walker->d_name.len; -+ strncpy(buf_walker, -+ sky_walker->d_name.name, -+ sky_walker->d_name.len); -+ *(--buf_walker) = '/'; -+ sky_walker = sky_walker->d_parent; -+ } while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry); -+ -+ /* bpath_len doesn't count newline! */ -+ *bpath_len = len; -+ return 0; -+} -+ -+int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt, -+ dentry_t *src_dentry, struct vfsmount *src_mnt) -+{ -+ void *buf; -+ mm_segment_t old_fs; -+ file_t *tgt_file; -+ file_t *src_file; -+ int bytes, len, tmp, err; -+ err = 0; -+ -+ if(!(tgt_dentry->d_inode && src_dentry->d_inode)) { -+ printk(KERN_CRIT "mini_fo_cp_cont: ERROR, neg. dentry passed.\n"); -+ err = -EINVAL; -+ goto out; -+ } -+ -+ dget(tgt_dentry); -+ dget(src_dentry); -+ mntget(tgt_mnt); -+ mntget(src_mnt); -+ -+ /* open file write only */ -+ tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1); -+ if(!tgt_file || IS_ERR(tgt_file)) { -+ printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n"); -+ err = PTR_ERR(tgt_file); -+ goto out_err; -+ } -+ -+ /* open file read only */ -+ src_file = dentry_open(src_dentry, src_mnt, 0x0); -+ if(!src_file || IS_ERR(src_file)) { -+ printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n"); -+ err = PTR_ERR(src_file); -+ -+ /* close target file */ -+ fput(tgt_file); -+ goto out_err; -+ } -+ -+ /* check if the filesystem(s) support read respective write */ -+ if(!src_file->f_op->read || !tgt_file->f_op->write) { -+ printk(KERN_CRIT "mini_fo_cp_cont: ERROR, no fs read or write support.\n"); -+ err = -EPERM; -+ goto out_close; -+ } -+ -+ /* allocate a page for transfering the data */ -+ buf = (void *) __get_free_page(GFP_KERNEL); -+ if(!buf) { -+ printk(KERN_CRIT "mini_fo_cp_cont: ERROR, out of kernel mem.\n"); -+ goto out_err; -+ } -+ -+ tgt_file->f_pos = 0; -+ src_file->f_pos = 0; -+ -+ old_fs = get_fs(); -+ set_fs(KERNEL_DS); -+ -+ /* Doing this I assume that a read operation will return a full -+ * buffer while there is still data to read, and a less than -+ * full buffer when all data has been read. -+ */ -+ bytes = len = PAGE_SIZE; -+ while(bytes == len) { -+ bytes = src_file->f_op->read(src_file, buf, len, -+ &src_file->f_pos); -+ tmp = tgt_file->f_op->write(tgt_file, buf, bytes, -+ &tgt_file->f_pos); -+ if(tmp != bytes) { -+ printk(KERN_CRIT "mini_fo_cp_cont: ERROR writing.\n"); -+ goto out_close_unset; -+ } -+ } -+ -+ free_page((unsigned long) buf); -+ set_fs(old_fs); -+ fput(tgt_file); -+ fput(src_file); -+ goto out; -+ -+ out_close_unset: -+ free_page((unsigned long) buf); -+ set_fs(old_fs); -+ -+ out_close: -+ fput(tgt_file); -+ fput(src_file); -+ -+ out_err: -+ dput(tgt_dentry); -+ dput(src_dentry); -+ -+ /* mk: not sure if this need to be done */ -+ mntput(tgt_mnt); -+ mntput(src_mnt); -+ -+ out: -+ return err; -+} -+ -+/* mk: -+ * ndl (no-duplicate list) stuff -+ * This is used in mini_fo_readdir, to save the storage directory contents -+ * and later when reading base, match them against the list in order -+ * to avoid duplicates. -+ */ -+ -+/* add a file specified by name and len to the ndl -+ * Return values: 0 on success, <0 on failure. -+ */ -+int ndl_add_entry(struct readdir_data *rd, const char *name, int len) -+{ -+ struct ndl_entry *tmp_entry; -+ -+ tmp_entry = (struct ndl_entry *) -+ kmalloc(sizeof(struct ndl_entry), GFP_KERNEL); -+ if(!tmp_entry) { -+ printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n"); -+ return -ENOMEM; -+ } -+ tmp_entry->name = (char*) kmalloc(len, GFP_KERNEL); -+ if(!tmp_entry->name) { -+ printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n"); -+ return -ENOMEM; -+ } -+ strncpy(tmp_entry->name, name, len); -+ tmp_entry->len = len; -+ -+ list_add(&tmp_entry->list, &rd->ndl_list); -+ rd->ndl_size++; -+ return 0; -+} -+ -+/* delete all list entries and free memory */ -+void ndl_put_list(struct readdir_data *rd) -+{ -+ struct list_head *tmp; -+ struct ndl_entry *tmp_entry; -+ -+ if(rd->ndl_size <= 0) -+ return; -+ while(!list_empty(&rd->ndl_list)) { -+ tmp = rd->ndl_list.next; -+ list_del(tmp); -+ tmp_entry = list_entry(tmp, struct ndl_entry, list); -+ kfree(tmp_entry->name); -+ kfree(tmp_entry); -+ } -+ rd->ndl_size = 0; -+} -+ -+/* Check if a file specified by name and len is in the ndl -+ * Return value: 0 if not in list, 1 if file is found in ndl. -+ */ -+int ndl_check_entry(struct readdir_data *rd, const char *name, int len) -+{ -+ struct list_head *tmp; -+ struct ndl_entry *tmp_entry; -+ -+ if(rd->ndl_size <= 0) -+ return 0; -+ -+ list_for_each(tmp, &rd->ndl_list) { -+ tmp_entry = list_entry(tmp, struct ndl_entry, list); -+ if(tmp_entry->len != len) -+ continue; -+ if(!strncmp(tmp_entry->name, name, len)) -+ return 1; -+ } -+ return 0; -+} -+ -+/* mk: -+ * Recursive function to create corresponding directorys in the storage fs. -+ * The function will build the storage directorys up to dentry. -+ */ -+int build_sto_structure(dentry_t *dir, dentry_t *dentry) -+{ -+ int err; -+ dentry_t *hidden_sto_dentry; -+ dentry_t *hidden_sto_dir_dentry; -+ -+ if(dentry->d_parent != dir) { -+ printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [1].\n"); -+ return 1; -+ } -+ -+ if(dtost(dir) != MODIFIED) { -+ err = build_sto_structure(dir->d_parent, dentry->d_parent); -+ if(err) -+ return err; -+ } -+ -+ /* ok, coming back again. */ -+ check_mini_fo_dentry(dentry); -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ if(!hidden_sto_dentry) { -+ /* -+ * This is the case after creating the first -+ * hidden_sto_dentry. -+ * After one negative storage_dentry, all pointers to -+ * hidden_storage dentries are set to NULL. We need to -+ * create the negative dentry before we create the storage -+ * file. -+ */ -+ unsigned int len; -+ const unsigned char *name; -+ len = dtohd(dentry)->d_name.len; -+ name = dtohd(dentry)->d_name.name; -+ hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len); -+ dtohd2(dentry) = hidden_sto_dentry; -+ } -+ -+ /* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ /* lets be safe */ -+ if(dtohd2(dir) != hidden_sto_dir_dentry) { -+ printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [2].\n"); -+ return 1; -+ } -+ -+ /* check for errors in lock_parent */ -+ err = PTR_ERR(hidden_sto_dir_dentry); -+ if(IS_ERR(hidden_sto_dir_dentry)) { -+ printk(KERN_CRIT "mini_fo: build_sto_structure: lock_parent failed.\n"); -+ return err; -+ } -+ -+ err = vfs_mkdir(hidden_sto_dir_dentry->d_inode, -+ hidden_sto_dentry, -+ dir->d_inode->i_mode); -+ -+ if(err) { -+ printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [1].\n"); -+ /* was: unlock_dir(dir); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&dir->d_inode->i_mutex); -+#else -+ up(&dir->d_inode->i_sem); -+#endif -+ dput(dir); -+ return err; -+ } -+ -+ /* everything ok! */ -+ if(!dtohd2(dentry)->d_inode) { -+ printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [2].\n"); -+ /* was: unlock_dir(dir); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&dir->d_inode->i_mutex); -+#else -+ up(&dir->d_inode->i_sem); -+#endif -+ dput(dir); -+ return 1; -+ } -+ -+ /* interpose the new inode and set new state */ -+ itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode); -+ dtopd(dentry)->state = MODIFIED; -+ -+ /* initalize the wol list */ -+ itopd(dentry->d_inode)->deleted_list_size = -1; -+ itopd(dentry->d_inode)->renamed_list_size = -1; -+ meta_build_lists(dentry); -+ -+ fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode)); -+ fist_copy_attr_timesizes(dir->d_inode, -+ hidden_sto_dir_dentry->d_inode); -+ dir->d_inode->i_nlink++; -+ /* was: unlock_dir(hidden_sto_dir_dentry); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ return 0; -+} -+ -+ -+#if 0 /* unused */ -+ -+/* -+ * Read "len" bytes from "filename" into "buf". -+ * "buf" is in kernel space. -+ */ -+int -+mini_fo_read_file(const char *filename, void *buf, int len) -+{ -+ file_t *filp; -+ mm_segment_t oldfs; -+ int bytes; -+ /* Chroot? Maybe NULL isn't right here */ -+ filp = filp_open(filename, O_RDONLY, 0); -+ if (!filp || IS_ERR(filp)) { -+ printk("mini_fo_read_file err %d\n", (int) PTR_ERR(filp)); -+ return -1; /* or do something else */ -+ } -+ -+ if (!filp->f_op->read) -+ return -2; /* file(system) doesn't allow reads */ -+ -+ /* now read len bytes from offset 0 */ -+ filp->f_pos = 0; /* start offset */ -+ oldfs = get_fs(); -+ set_fs(KERNEL_DS); -+ bytes = filp->f_op->read(filp, buf, len, &filp->f_pos); -+ set_fs(oldfs); -+ -+ /* close the file */ -+ fput(filp); -+ -+ return bytes; -+} -+ -+ -+ -+/* -+ * Write "len" bytes from "buf" to "filename" -+ * "buf" is in kernel space. -+ */ -+int -+mini_fo_write_file(const char *filename, void *buf, int len) -+{ -+ file_t *filp; -+ mm_segment_t oldfs; -+ int bytes; -+ /* Chroot? Maybe NULL isn't right here */ -+ filp = filp_open(filename, O_RDWR|O_CREAT, 0640); -+ if (!filp || IS_ERR(filp)) { -+ printk("mini_fo_write_file err %d\n", (int) PTR_ERR(filp)); -+ return -1; /* or do something else */ -+ } -+ -+ if (!filp->f_op->write) -+ return -2; /* file(system) doesn't allow writes */ -+ -+ /* now write len bytes from offset 0 */ -+ filp->f_pos = 0; /* start offset */ -+ oldfs = get_fs(); -+ set_fs(KERNEL_DS); -+ bytes = filp->f_op->write(filp, buf, len, &filp->f_pos); -+ set_fs(oldfs); -+ -+ /* close the file */ -+ fput(filp); -+ -+ return bytes; -+} -+ -+#endif /* unused */ -+ -diff -urN linux-2.6.19.old/fs/mini_fo/ChangeLog linux-2.6.19.dev/fs/mini_fo/ChangeLog ---- linux-2.6.19.old/fs/mini_fo/ChangeLog 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/ChangeLog 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,281 @@ -+2006-01-24 Markus Klotzbuecher -+ -+ * Add tons of ugly ifdefs to Ed L. Cashin's mutex patch to -+ retain backwards compatibility. -+ -+2006-01-24 Ed L. Cashin -+ -+ * Support for the new mutex infrastructure -+ (7892f2f48d165a34b0b8130c8a195dfd807b8cb6) -+ -+2005-10-15 Markus Klotzbuecher -+ -+ * Bugfix for a serious memory leak in mini_fo_follow_link. -+ -+2005-09-21 Markus Klotzbuecher -+ -+ * new release 0.6.1 -+ -+ * fix of a compiler warning due to changes in 2.6.13 -+ -+2005-09-21 Klaus Wenninger -+ -+ * file.c: readdir: fix for a bug that caused directory entries -+ to show up twice when using storage filesystems such as -+ minixfs or pramfs. -+ -+2005-06-30 Eric Lammerts -+ -+ * fix for an oops when overwriting a binary thats beeing -+ executed. -+ -+2005-06-09 -+ -+ * Renamed overlay to mini_fo-overlay. -+ -+ * Added mini_fo-merge script to allow merging of storage and base -+ after making modifications. -+ -+2005-05-22 root -+ -+ * Added overlay script that allows to easily mount mini_fo ontop -+ of a given base directory -+ -+2005-05-10 -+ -+ * inode.c: xattr functions return -EOPNOSUPP instead of -+ -ENOSUPP, what confuses "ls -l" -+ -+ * Changed license from LGPL to GPL. -+ -+2005-05-08 root -+ -+ * Makefile: clean it up and added make install and make -+ uninstall. -+ -+2005-05-06 -+ -+ * merged devel branch back to main. [v0-6-0-pre3] -+ -+ * removed unused files print.c and fist_ioctl. [devel-0-0-18] -+ -+ * ioctl: removed fist_ioctl stuff, that is not needed for -+ now. -+ -+2005-05-03 -+ -+ * file.c: simplified mini_fo_open and mini_fo_setattr using -+ new state changing functions. [devel-0-0-17] -+ -+ * inode.c: Fixed getattr state bug (see below) in 2.4 function -+ mini_fo_inode revalidate. -+ -+ * inode.c: found an other bug in mini_fo_getattr. States are not -+ reliable in this function, as a file can be opened, unlinked and -+ the getattr function called. This results in a deleted dentry -+ with an inode. Fix is to ignore states and simply use the inode -+ available. -+ -+2005-04-29 -+ -+ * file.c: Bugfix and cleanup in fasync and fsync. [devel-0-0-16] -+ -+ * file.c: do not use mini_fo_lock so the generic version is -+ used (I guess). -+ -+ * inode.c: getattr, never call getattr on lower files, as this -+ will cause the inum to change. -+ -+ * inode.c: rename_reg_file renamed to rename_nondir, as it -+ doesn't matter as long it't not a dir. Removed all -+ rename_dev_file etc. -+ -+ * tagged as devel-0-0-15 -+ -+ * inode.c: added support for chosing support for extended -+ attrs at compile time by XATTR define in mini_fo.h . -+ -+ * inode.c: fixed mini_fo_getattr to use mini_fo inode and not -+ lower again, what avoids inode number changes that confused -+ rm again. This is the proper solution. -+ -+2005-04-24 -+ -+ * all files: updated Copyright notive to 2005. [devel-0-0-14] -+ -+ * inode.c: fixed mini_fo_getattr to not change the inode -+ number, even if lower files change. -+ -+ * super.c: fixed a bug that caused deleted base file to show -+ up suddenly after some time, or after creating a special -+ file. The problem was that after some time or after special -+ file creating sync_sb_inodes is called by the vfs, that -+ called our mini_fo_put_inode. There was (wrongly) called -+ __meta_put_lists, that nuked the lists, although the inode -+ was going to continue its life. Moving __meta_put_lists to -+ mini_fo_clear_inode, where an inode is really destroyed, -+ solved the problem. -+ -+ -+2005-04-23 -+ -+ * state.c, aux.c: more cleaning up and -+ simplifications. [devel-0-0-13] -+ -+ * inode.c: implemented mini_fo_getattr, that was required for -+ 2.6 because inode_revalidate has been remove there, and the -+ old "du" bug returned. -+ -+ -+2005-04-20 -+ -+ * aux.c: get_neg_sto_dentry(): allow to be called for dentries -+ in state UNMODIFIED, NON_EXISTANT _and_ DELETED. -+ -+2005-04-19 -+ -+ * Fixed a bug under 2.6 that caused files deleted via mini_fo -+ not to be deleted properly and therefore the fs filled up -+ untill no memory was left. [devel-0-0-12] -+ -+ * Added basic hard link support. This means that creating -+ hardlinks will work, but existing ones will be treated as -+ individual files. [devel-0-0-11] -+ -+2005-04-17 -+ -+ * Bugfixes -+ -+2005-04-13 root -+ -+ * Added file state.c for the state transition -+ functions. Doesn't work very well yet, though... -+ -+2005-04-12 -+ -+ * Porting to 2.6 started, which is easier than expected, also -+ due to Olivier previous work. -+ -+2005-04-08 -+ -+ * Fixed the bug that caused du to return invalid sizes of -+ directory trees. The problem was that -+ mini_fo_inode_revalidate didn't always copy the attributes -+ from the base inode properly. -+ -+2005-04-01 Markus Klotzbuecher -+ -+ * Merged devel branch back to main trunk and updated the -+ RELEASE notes. This will be 0-6-0-pre1. -+ -+2005-03-31 Markus Klotzbuecher -+ -+ * Fixed some bugs in rename_reg_file, that only showed up in -+ the kernel compile test. Kernel compiles cleanly ontop of -+ mini_fo, now also make mrproper etc. work. Seems pretty stable. -+ -+2005-03-28 Markus Klotzbuecher -+ -+ * Many, many directory renaming bugfixes and a lot of other -+ cleanup. Dir renaming seems to work relatively stable. -+ -+2005-03-22 Markus Klotzbuecher -+ -+ * Finished implementing lightweight directory renaming. Some -+ basic testing indicates it works fine. -+ Next is to implement testcases for the testsuite and confirm -+ everything is really working ok. -+ -+2005-03-18 Markus Klotzbuecher -+ -+ * Finished implementing meta.c stuff required for directory -+ renaming. -+ -+2005-03-17 Markus Klotzbuecher -+ -+ * Fixed all compile warnings + an extremly old bug that -+ somehow crept in while reworking the wol stuff to the META -+ system. Turning on -Werror again... :-) -+ -+ * Fixed some bugs in the new rename_reg_file function. -+ -+ * Rewrote mini_fo rename and split it into several -+ subfunctions, that handle the different types -+ seperately. Rewrote the regular file function aswell, as it -+ was implemented somewhat inefficient. -+ -+2005-03-16 Markus Klotzbuecher -+ -+ * Implemented new META subsystem, removed old WOL stuff in favor -+ if it. -+ -+ * After some basic testing everything seems ok... -+ -+2005-03-11 Markus Klotzbuecher -+ -+ * Renaming a non regular file caused trouble because I always -+ tried to copy the contents. Now I only do this for regular -+ files. mini_fo_rename still isn't implemented properly, renaming -+ of device files, symlinks etc. results in a empty regular file -+ instead of the proper type. -+ -+ * Directory renaming suddenly works! What a surprise! I guess -+ this is because renaming is implemented as making a copy and -+ removing the original. Still this might not work -+ everywhere... -+ -+2005-03-09 Markus Klotzbuecher -+ -+ * Bugfix, when a mini_fo directory that exists in storage -+ (state: MODIFIED, CREATED and DEL_REWRITTEN) is deleted, a -+ possibly existing WOL file contained in it needs to be -+ deleted too. -+ -+ * Starting cleanup: defined state names in order to get rid of -+ the state numbers. -+ -+2005-03-08 Markus Klotzbuecher -+ -+ * Makefile fix, fist_ioctl was built against wrong sources if ARCH=um -+ -+ * Fixed a bug in dentry.c, mini_fo_d_hash. In state 4 = -+ DEL_REWRITTEN the hash was calculated from the base dentry, -+ which was wrong and and caused assertions in -+ __mini_fo_hidden_dentry to fail. -+ -+2005-02-21 -+ -+ * Implemented directory deleting (inode.c) -+ -+ * main.c: made mini_fo_parse_options a little more robust. -+ -+2004-12-22 -+ -+ * Makefile cleanup and uml stuff, removed unneccessary files -+ -+ * Created a new and hopefully more informative README -+ -+ * CHANGELOG: created a new CHANGELOG and added old entries reversely -+ -+ -+2004-10-24 Gleb Natapov -+ -+ * Fix: owner and group where not correctly copied from base to -+ storage. -+ -+ -+2004-10-05 Gleb Natapov -+ -+ * Implementation of fsync, fasync and lock mini_fo functions. -+ -+ -+2004-09-29 Bob Lee -+ -+ * Fix of a serious pointer bug -+ -+ -+2004-09-28 Gleb Natapov -+ -+ * Implementation of mini_fo_mknod and mini_fo_rename, support -+ for device files. -+ -diff -urN linux-2.6.19.old/fs/mini_fo/dentry.c linux-2.6.19.dev/fs/mini_fo/dentry.c ---- linux-2.6.19.old/fs/mini_fo/dentry.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/dentry.c 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,244 @@ -+/* -+ * Copyright (c) 1997-2003 Erez Zadok -+ * Copyright (c) 2001-2003 Stony Brook University -+ * -+ * For specific licensing information, see the COPYING file distributed with -+ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING. -+ * -+ * This Copyright notice must be kept intact and distributed with all -+ * fistgen sources INCLUDING sources generated by fistgen. -+ */ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+/* -+ * $Id$ -+ */ -+ -+#ifdef HAVE_CONFIG_H -+# include -+#endif -+ -+#include "fist.h" -+#include "mini_fo.h" -+ -+/* -+ * THIS IS A BOOLEAN FUNCTION: returns 1 if valid, 0 otherwise. -+ */ -+STATIC int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+mini_fo_d_revalidate(dentry_t *dentry, struct nameidata *nd) -+#else -+mini_fo_d_revalidate(dentry_t *dentry, int flags) -+#endif -+{ -+ int err1 = 1; /* valid = 1, invalid = 0 */ -+ int err2 = 1; -+ dentry_t *hidden_dentry; -+ dentry_t *hidden_sto_dentry; -+ -+ -+ check_mini_fo_dentry(dentry); -+ -+ hidden_dentry = dtohd(dentry); -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ if(hidden_dentry && -+ hidden_dentry->d_op && -+ hidden_dentry->d_op->d_revalidate) { -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, nd); -+#else -+ err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, flags); -+#endif -+ } -+ if(hidden_sto_dentry && -+ hidden_sto_dentry->d_op && -+ hidden_sto_dentry->d_op->d_revalidate) { -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry, -+ nd); -+#else -+ err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry, -+ flags); -+#endif -+ } -+ -+ /* mk: if one of the lower level dentries are valid, -+ * the mini_fo dentry is too. -+ */ -+ return (err1 || err2); -+} -+ -+ -+STATIC int -+mini_fo_d_hash(dentry_t *dentry, qstr_t *name) -+{ -+ int err = 0; -+ dentry_t *hidden_dentry; -+ dentry_t *hidden_sto_dentry; -+ -+ /* hidden_dentry = mini_fo_hidden_dentry(dentry); -+ * hidden_sto_dentry = mini_fo_hidden_sto_dentry(dentry); */ -+ -+ /* state 1, 3, 4, 5: build the hash for the storage dentry */ -+ if((dtopd(dentry)->state == MODIFIED) || -+ (dtopd(dentry)->state == CREATED) || -+ (dtopd(dentry)->state == DEL_REWRITTEN) || -+ (dtopd(dentry)->state == DELETED)) { -+ hidden_sto_dentry = dtohd2(dentry); -+ if(hidden_sto_dentry && -+ hidden_sto_dentry->d_op && -+ hidden_sto_dentry->d_op->d_hash) { -+ err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name); -+ } -+ goto out; -+ } -+ /* state 2: build the hash for the base dentry */ -+ if(dtopd(dentry)->state == UNMODIFIED) { -+ hidden_dentry = dtohd(dentry); -+ if(hidden_dentry && -+ hidden_dentry->d_op && -+ hidden_dentry->d_op->d_hash) { -+ err = hidden_dentry->d_op->d_hash(hidden_dentry, name); -+ } -+ goto out; -+ } -+ /* state 6: build hash for the dentry that exists */ -+ if(dtopd(dentry)->state == NON_EXISTANT) { -+ hidden_sto_dentry = dtohd2(dentry); -+ if(hidden_sto_dentry && -+ hidden_sto_dentry->d_op && -+ hidden_sto_dentry->d_op->d_hash) { -+ err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name); -+ goto out; -+ } -+ hidden_dentry = dtohd(dentry); -+ if(hidden_dentry && -+ hidden_dentry->d_op && -+ hidden_dentry->d_op->d_hash) { -+ err = hidden_dentry->d_op->d_hash(hidden_dentry, name); -+ goto out; -+ } -+ } -+ -+ printk(KERN_CRIT "mini_fo: d_hash: invalid state detected.\n"); -+ -+ out: -+ return err; -+} -+ -+ -+STATIC int -+mini_fo_d_compare(dentry_t *dentry, qstr_t *a, qstr_t *b) -+{ -+ int err; -+ dentry_t *hidden_dentry=NULL; -+ -+ /* hidden_dentry = mini_fo_hidden_dentry(dentry); */ -+ if(dtohd2(dentry)) -+ hidden_dentry = dtohd2(dentry); -+ else if(dtohd(dentry)) -+ hidden_dentry = dtohd(dentry); -+ -+ if (hidden_dentry && hidden_dentry->d_op && hidden_dentry->d_op->d_compare) { -+ err = hidden_dentry->d_op->d_compare(hidden_dentry, a, b); -+ } else { -+ err = ((a->len != b->len) || memcmp(a->name, b->name, b->len)); -+ } -+ -+ return err; -+} -+ -+ -+int -+mini_fo_d_delete(dentry_t *dentry) -+{ -+ dentry_t *hidden_dentry; -+ dentry_t *hidden_sto_dentry; -+ int err = 0; -+ -+ /* this could be a negative dentry, so check first */ -+ if (!dtopd(dentry)) { -+ printk(KERN_CRIT "mini_fo_d_delete: negative dentry passed.\n"); -+ goto out; -+ } -+ hidden_dentry = dtohd(dentry); -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ if(hidden_dentry) { -+ if(hidden_dentry->d_op && -+ hidden_dentry->d_op->d_delete) { -+ err = hidden_dentry->d_op->d_delete(hidden_dentry); -+ } -+ } -+ if(hidden_sto_dentry) { -+ if(hidden_sto_dentry->d_op && -+ hidden_sto_dentry->d_op->d_delete) { -+ err = hidden_sto_dentry->d_op->d_delete(hidden_sto_dentry); -+ } -+ } -+ -+ out: -+ return err; -+} -+ -+ -+void -+mini_fo_d_release(dentry_t *dentry) -+{ -+ dentry_t *hidden_dentry; -+ dentry_t *hidden_sto_dentry; -+ -+ -+ /* this could be a negative dentry, so check first */ -+ if (!dtopd(dentry)) { -+ printk(KERN_CRIT "mini_fo_d_release: no private data.\n"); -+ goto out; -+ } -+ hidden_dentry = dtohd(dentry); -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ if(hidden_dentry) { -+ /* decrement hidden dentry's counter and free its inode */ -+ dput(hidden_dentry); -+ } -+ if(hidden_sto_dentry) { -+ /* decrement hidden dentry's counter and free its inode */ -+ dput(hidden_sto_dentry); -+ } -+ -+ /* free private data (mini_fo_dentry_info) here */ -+ kfree(dtopd(dentry)); -+ __dtopd(dentry) = NULL; /* just to be safe */ -+ out: -+ return; -+} -+ -+ -+/* -+ * we don't really need mini_fo_d_iput, because dentry_iput will call iput() if -+ * mini_fo_d_iput is not defined. We left this implemented for ease of -+ * tracing/debugging. -+ */ -+void -+mini_fo_d_iput(dentry_t *dentry, inode_t *inode) -+{ -+ iput(inode); -+} -+ -+ -+struct dentry_operations mini_fo_dops = { -+ d_revalidate: mini_fo_d_revalidate, -+ d_hash: mini_fo_d_hash, -+ d_compare: mini_fo_d_compare, -+ d_release: mini_fo_d_release, -+ d_delete: mini_fo_d_delete, -+ d_iput: mini_fo_d_iput, -+}; -diff -urN linux-2.6.19.old/fs/mini_fo/file.c linux-2.6.19.dev/fs/mini_fo/file.c ---- linux-2.6.19.old/fs/mini_fo/file.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/file.c 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,713 @@ -+/* -+ * Copyright (c) 1997-2003 Erez Zadok -+ * Copyright (c) 2001-2003 Stony Brook University -+ * -+ * For specific licensing information, see the COPYING file distributed with -+ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING. -+ * -+ * This Copyright notice must be kept intact and distributed with all -+ * fistgen sources INCLUDING sources generated by fistgen. -+ */ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+/* -+ * $Id$ -+ */ -+ -+#ifdef HAVE_CONFIG_H -+# include -+#endif -+ -+#include "fist.h" -+#include "mini_fo.h" -+#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1)) -+ -+/******************* -+ * File Operations * -+ *******************/ -+ -+STATIC loff_t -+mini_fo_llseek(file_t *file, loff_t offset, int origin) -+{ -+ loff_t err; -+ file_t *hidden_file = NULL; -+ -+ if(S_ISDIR(file->f_dentry->d_inode->i_mode)) { -+ /* Check if trying to llseek from a directory */ -+ err = -EISDIR; -+ goto out; -+ } -+ if (ftopd(file) != NULL) { -+ if(ftohf2(file)) { -+ hidden_file = ftohf2(file); -+ } else { -+ hidden_file = ftohf(file); -+ } -+ } -+ -+ /* always set hidden position to this one */ -+ hidden_file->f_pos = file->f_pos; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ memcpy(&(hidden_file->f_ra), -+ &(file->f_ra), -+ sizeof(struct file_ra_state)); -+#else -+ if (file->f_reada) { /* update readahead information if needed */ -+ hidden_file->f_reada = file->f_reada; -+ hidden_file->f_ramax = file->f_ramax; -+ hidden_file->f_raend = file->f_raend; -+ hidden_file->f_ralen = file->f_ralen; -+ hidden_file->f_rawin = file->f_rawin; -+ } -+#endif -+ if (hidden_file->f_op && hidden_file->f_op->llseek) -+ err = hidden_file->f_op->llseek(hidden_file, offset, origin); -+ else -+ err = generic_file_llseek(hidden_file, offset, origin); -+ -+ if (err < 0) -+ goto out; -+ -+ if (err != file->f_pos) { -+ file->f_pos = err; -+ // ION maybe this? -+ // file->f_pos = hidden_file->f_pos; -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ file->f_reada = 0; -+#endif -+ file->f_version++; -+ } -+ -+ out: -+ return err; -+} -+ -+ -+/* mk: fanout capable */ -+STATIC ssize_t -+mini_fo_read(file_t *file, char *buf, size_t count, loff_t *ppos) -+{ -+ int err = -EINVAL; -+ file_t *hidden_file = NULL; -+ loff_t pos = *ppos; -+ -+ if(S_ISDIR(file->f_dentry->d_inode->i_mode)) { -+ /* Check if trying to read from a directory */ -+ /* printk(KERN_CRIT "mini_fo_read: ERROR: trying to read data from a directory.\n"); */ -+ err = -EISDIR; -+ goto out; -+ } -+ -+ if (ftopd(file) != NULL) { -+ if(ftohf2(file)) { -+ hidden_file = ftohf2(file); -+ } else { -+ hidden_file = ftohf(file); -+ } -+ } -+ -+ if (!hidden_file->f_op || !hidden_file->f_op->read) -+ goto out; -+ -+ err = hidden_file->f_op->read(hidden_file, buf, count, &pos); -+ *ppos = pos; -+ -+ if (err >= 0) { -+ /* atime should also be updated for reads of size zero or more */ -+ fist_copy_attr_atime(file->f_dentry->d_inode, -+ hidden_file->f_dentry->d_inode); -+ } -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ /* -+ * MAJOR HACK -+ * because pread() does not have any way to tell us that it is -+ * our caller, then we don't know for sure if we have to update -+ * the file positions. This hack relies on read() having passed us -+ * the "real" pointer of its struct file's f_pos field. -+ */ -+ if (ppos == &file->f_pos) -+ hidden_file->f_pos = *ppos = pos; -+ if (hidden_file->f_reada) { /* update readahead information if needed */ -+ file->f_reada = hidden_file->f_reada; -+ file->f_ramax = hidden_file->f_ramax; -+ file->f_raend = hidden_file->f_raend; -+ file->f_ralen = hidden_file->f_ralen; -+ file->f_rawin = hidden_file->f_rawin; -+ } -+#else -+ memcpy(&(file->f_ra),&(hidden_file->f_ra),sizeof(struct file_ra_state)); -+#endif -+ -+ out: -+ return err; -+} -+ -+ -+/* this mini_fo_write() does not modify data pages! */ -+STATIC ssize_t -+mini_fo_write(file_t *file, const char *buf, size_t count, loff_t *ppos) -+{ -+ int err = -EINVAL; -+ file_t *hidden_file = NULL; -+ inode_t *inode; -+ inode_t *hidden_inode; -+ loff_t pos = *ppos; -+ -+ /* mk: fan out: */ -+ if (ftopd(file) != NULL) { -+ if(ftohf2(file)) { -+ hidden_file = ftohf2(file); -+ } else { -+ /* This is bad! We have no storage file to write to. This -+ * should never happen because if a file is opened for -+ * writing, a copy should have been made earlier. -+ */ -+ printk(KERN_CRIT "mini_fo: write : ERROR, no storage file to write.\n"); -+ err = -EINVAL; -+ goto out; -+ } -+ } -+ -+ inode = file->f_dentry->d_inode; -+ hidden_inode = itohi2(inode); -+ if(!hidden_inode) { -+ printk(KERN_CRIT "mini_fo: write: no sto inode found, not good.\n"); -+ goto out; -+ } -+ -+ if (!hidden_file->f_op || !hidden_file->f_op->write) -+ goto out; -+ -+ /* adjust for append -- seek to the end of the file */ -+ if (file->f_flags & O_APPEND) -+ pos = inode->i_size; -+ -+ err = hidden_file->f_op->write(hidden_file, buf, count, &pos); -+ -+ /* -+ * copy ctime and mtime from lower layer attributes -+ * atime is unchanged for both layers -+ */ -+ if (err >= 0) -+ fist_copy_attr_times(inode, hidden_inode); -+ -+ *ppos = pos; -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ /* -+ * XXX: MAJOR HACK -+ * -+ * because pwrite() does not have any way to tell us that it is -+ * our caller, then we don't know for sure if we have to update -+ * the file positions. This hack relies on write() having passed us -+ * the "real" pointer of its struct file's f_pos field. -+ */ -+ if (ppos == &file->f_pos) -+ hidden_file->f_pos = *ppos = pos; -+#endif -+ /* update this inode's size */ -+ if (pos > inode->i_size) -+ inode->i_size = pos; -+ -+ out: -+ return err; -+} -+ -+/* Global variable to hold a file_t pointer. -+ * This serves to allow mini_fo_filldir function to know which file is -+ * beeing read, which is required for two reasons: -+ * -+ * - be able to call wol functions in order to avoid listing deleted -+ * base files. -+ * - if we're reading a directory which is in state 1, we need to -+ * maintain a list (in mini_fo_filldir) of which files allready -+ * have been copied to userspace,to detect files existing in base -+ * and storage and not list them twice. -+ */ -+filldir_t mini_fo_filldir_orig; -+file_t *mini_fo_filldir_file; -+ -+/* mainly copied from fs/readdir.c */ -+STATIC int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset, -+ u64 ino, unsigned int d_type) -+#else -+mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset, -+ ino_t ino, unsigned int d_type) -+#endif -+{ -+ struct getdents_callback * buf = (struct getdents_callback *) __buf; -+ file_t* file = mini_fo_filldir_file; -+ -+ /* In theses states we filter meta files in storage (WOL) */ -+ if(file && (dtopd(file->f_dentry)->state == MODIFIED || -+ dtopd(file->f_dentry)->state == CREATED || -+ dtopd(file->f_dentry)->state == DEL_REWRITTEN)) { -+ -+ int tmp = strlen(META_FILENAME); -+ if(tmp == namlen) { -+ if(!strncmp(name, META_FILENAME, namlen)) -+ return 0; -+ } -+ } -+ -+ /* check if we are merging the contents of storage and base */ -+ if(file && dtopd(file->f_dentry)->state == MODIFIED) { -+ /* check if we are still reading storage contents, if -+ * yes, we just save the name of the file for duplicate -+ * checking later. */ -+ -+ if(!ftopd(file)->rd.sto_done) { -+ /* put file into ndl list */ -+ if(ndl_add_entry(&ftopd(file)->rd, name, namlen)) -+ printk(KERN_CRIT "mini_fo_filldir: Error adding to ndl.\n"); -+ } else { -+ /* check if file has been deleted */ -+ if(meta_check_d_entry(file->f_dentry, name, namlen)) -+ return 0; -+ -+ /* do duplicate checking */ -+ if(ndl_check_entry(&ftopd(file)->rd, name, namlen)) -+ return 0; -+ } -+ } -+ -+ return mini_fo_filldir_orig(buf, name, namlen, offset, ino, d_type); -+} -+ -+ -+STATIC int -+mini_fo_readdir(file_t *file, void *dirent, filldir_t filldir) -+{ -+ int err = 0;/* mk: ??? -ENOTDIR; */ -+ file_t *hidden_file = NULL; -+ file_t *hidden_sto_file = NULL; -+ inode_t *inode; -+ struct getdents_callback *buf; -+ int oldcount; -+ -+#if defined(FIST_FILTER_NAME) || defined(FIST_FILTER_SCA) -+ struct mini_fo_getdents_callback buf; -+#endif /* FIST_FILTER_NAME || FIST_FILTER_SCA */ -+ -+ buf = (struct getdents_callback *) dirent; -+ oldcount = buf->count; -+ inode = file->f_dentry->d_inode; -+ mini_fo_filldir_file = file; -+ mini_fo_filldir_orig = filldir; -+ -+ ftopd(file)->rd.sto_done = 0; -+ do { -+ if (ftopd(file) != NULL) { -+ if(ftohf2(file)) { -+ hidden_sto_file = ftohf2(file); -+ err = vfs_readdir(hidden_sto_file, mini_fo_filldir, dirent); -+ file->f_pos = hidden_sto_file->f_pos; -+ if (err > 0) -+ fist_copy_attr_atime(inode, hidden_sto_file->f_dentry->d_inode); -+ /* not finshed yet, we'll be called again */ -+ if (buf->count != oldcount) -+ break; -+ } -+ -+ ftopd(file)->rd.sto_done = 1; -+ -+ if(ftohf(file)) { -+ hidden_file = ftohf(file); -+ err = vfs_readdir(hidden_file, mini_fo_filldir, dirent); -+ file->f_pos = hidden_file->f_pos; -+ if (err > 0) -+ fist_copy_attr_atime(inode, hidden_file->f_dentry->d_inode); -+ } -+ -+ } -+ } while (0); -+ -+ /* mk: -+ * we need to check if all the directory data has been copied to userspace, -+ * or if we will be called again by userspace to complete the operation. -+ */ -+ if(buf->count == oldcount) { -+ ndl_put_list(&ftopd(file)->rd); -+ } -+ -+ /* unset this, safe */ -+ mini_fo_filldir_file = NULL; -+ return err; -+} -+ -+ -+STATIC unsigned int -+mini_fo_poll(file_t *file, poll_table *wait) -+{ -+ unsigned int mask = DEFAULT_POLLMASK; -+ file_t *hidden_file = NULL; -+ -+ if (ftopd(file) != NULL) { -+ if(ftohf2(file)) { -+ hidden_file = ftohf2(file); -+ } else { -+ hidden_file = ftohf(file); -+ } -+ } -+ -+ if (!hidden_file->f_op || !hidden_file->f_op->poll) -+ goto out; -+ -+ mask = hidden_file->f_op->poll(hidden_file, wait); -+ -+ out: -+ return mask; -+} -+ -+/* FIST-LITE special version of mmap */ -+STATIC int -+mini_fo_mmap(file_t *file, vm_area_t *vma) -+{ -+ int err = 0; -+ file_t *hidden_file = NULL; -+ -+ /* fanout capability */ -+ if (ftopd(file) != NULL) { -+ if(ftohf2(file)) { -+ hidden_file = ftohf2(file); -+ } else { -+ hidden_file = ftohf(file); -+ } -+ } -+ -+ ASSERT(hidden_file != NULL); -+ ASSERT(hidden_file->f_op != NULL); -+ ASSERT(hidden_file->f_op->mmap != NULL); -+ -+ vma->vm_file = hidden_file; -+ err = hidden_file->f_op->mmap(hidden_file, vma); -+ get_file(hidden_file); /* make sure it doesn't get freed on us */ -+ fput(file); /* no need to keep extra ref on ours */ -+ -+ return err; -+} -+ -+ -+ -+STATIC int -+mini_fo_open(inode_t *inode, file_t *file) -+{ -+ int err = 0; -+ int hidden_flags; -+ file_t *hidden_file = NULL; -+ dentry_t *hidden_dentry = NULL; -+ -+ /* fanout stuff */ -+ file_t *hidden_sto_file = NULL; -+ dentry_t *hidden_sto_dentry = NULL; -+ -+ __ftopd(file) = -+ kmalloc(sizeof(struct mini_fo_file_info), GFP_KERNEL); -+ if (!ftopd(file)) { -+ err = -ENOMEM; -+ goto out; -+ } -+ -+ /* init the readdir_helper structure */ -+ INIT_LIST_HEAD(&ftopd(file)->rd.ndl_list); -+ ftopd(file)->rd.ndl_size = 0; -+ -+ /* In certain paths this could stay uninitalized and cause trouble */ -+ ftohf(file) = NULL; -+ ftohf2(file) = NULL; -+ hidden_flags = file->f_flags; -+ -+ /* create storage files? */ -+ if(dtost(file->f_dentry) == UNMODIFIED) { -+ if(!IS_WRITE_FLAG(file->f_flags)) { -+ hidden_dentry = dtohd(file->f_dentry); -+ dget(hidden_dentry); -+ /* dentry_open will decrement mnt refcnt if err. -+ * otherwise fput() will do an mntput() for us upon file close. */ -+ mntget(stopd(inode->i_sb)->hidden_mnt); -+ hidden_file = dentry_open(hidden_dentry, -+ stopd(inode->i_sb)->hidden_mnt, -+ hidden_flags); -+ if (IS_ERR(hidden_file)) { -+ err = PTR_ERR(hidden_file); -+ dput(hidden_dentry); -+ goto out; -+ } -+ ftohf(file) = hidden_file; /* link two files */ -+ goto out; -+ } -+ else { -+ if(S_ISDIR(file->f_dentry->d_inode->i_mode)) { -+ err = dir_unmod_to_mod(file->f_dentry); -+ } else -+ err = nondir_unmod_to_mod(file->f_dentry, 1); -+ -+ if (err) { -+ printk("mini_fo_open: ERROR creating storage file.\n"); -+ goto out; -+ } -+ } -+ } -+ hidden_sto_dentry = dtohd2(file->f_dentry); -+ dget(hidden_sto_dentry); -+ -+ if(dtopd(file->f_dentry)->state == MODIFIED) { -+ /* Directorys are special, interpose on both lower level files */ -+ if(S_ISDIR(itohi(inode)->i_mode)) { -+ /* check for invalid file types of lower level files */ -+ if(!(S_ISDIR(itohi(inode)->i_mode) && S_ISDIR(itohi2(inode)->i_mode))) { -+ printk(KERN_CRIT "mini_fo_open: meta data corruption detected.\n"); -+ dput(hidden_sto_dentry); -+ err = -EINVAL; -+ goto out; -+ } -+ -+ /* lower level directorys are ok, open the base file */ -+ hidden_dentry = dtohd(file->f_dentry); -+ dget(hidden_dentry); -+ -+ mntget(stopd(inode->i_sb)->hidden_mnt); -+ hidden_file = dentry_open(hidden_dentry, -+ stopd(inode->i_sb)->hidden_mnt, -+ hidden_flags); -+ if (IS_ERR(hidden_file)) { -+ err = PTR_ERR(hidden_file); -+ dput(hidden_dentry); -+ dput(hidden_sto_dentry); -+ goto out; -+ } -+ ftohf(file) = hidden_file; /* link the two files */ -+ } -+ } -+ -+ if(!exists_in_storage(file->f_dentry)) { -+ printk(KERN_CRIT "mini_fo_open: invalid file state detected.\n"); -+ err = -EINVAL; -+ dput(hidden_sto_dentry); -+ -+ /* If the base file has been opened, we need to close it here */ -+ if(ftohf(file)) { -+ if (hidden_file->f_op && hidden_file->f_op->flush) -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+ hidden_file->f_op->flush(hidden_file, NULL); -+#else -+ hidden_file->f_op->flush(hidden_file); -+#endif -+ dput(hidden_dentry); -+ } -+ goto out; -+ } -+ -+ /* ok, now we can safely open the storage file */ -+ mntget(stopd(inode->i_sb)->hidden_mnt2); -+ hidden_sto_file = dentry_open(hidden_sto_dentry, -+ stopd(inode->i_sb)->hidden_mnt2, -+ hidden_flags); -+ -+ /* dentry_open dputs the dentry if it fails */ -+ if (IS_ERR(hidden_sto_file)) { -+ err = PTR_ERR(hidden_sto_file); -+ /* close base file if open */ -+ if(ftohf(file)) { -+ if (hidden_file->f_op && hidden_file->f_op->flush) -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+ hidden_file->f_op->flush(hidden_file, NULL); -+#else -+ hidden_file->f_op->flush(hidden_file); -+#endif -+ dput(hidden_dentry); -+ } -+ goto out; -+ } -+ ftohf2(file) = hidden_sto_file; /* link storage file */ -+ -+ out: -+ if (err < 0 && ftopd(file)) { -+ kfree(ftopd(file)); -+ } -+ return err; -+} -+ -+STATIC int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+mini_fo_flush(file_t *file, fl_owner_t id) -+#else -+mini_fo_flush(file_t *file) -+#endif -+{ -+ int err1 = 0; /* assume ok (see open.c:close_fp) */ -+ int err2 = 0; -+ file_t *hidden_file = NULL; -+ -+ check_mini_fo_file(file); -+ -+ /* mk: we don't do any state checking here, as its not worth the time. -+ * Just flush the lower level files if they exist. -+ */ -+ if(ftopd(file) != NULL) { -+ if(ftohf(file) != NULL) { -+ hidden_file = ftohf(file); -+ if (hidden_file->f_op && hidden_file->f_op->flush) -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+ err1 = hidden_file->f_op->flush(hidden_file, id); -+#else -+ err1 = hidden_file->f_op->flush(hidden_file); -+#endif -+ } -+ if(ftohf2(file) != NULL) { -+ hidden_file = ftohf2(file); -+ if (hidden_file->f_op && hidden_file->f_op->flush) -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+ err2 = hidden_file->f_op->flush(hidden_file, id); -+#else -+ err2 = hidden_file->f_op->flush(hidden_file); -+#endif -+ } -+ } -+ return (err1 | err2); -+} -+ -+ -+STATIC int -+mini_fo_release(inode_t *inode, file_t *file) -+{ -+ int err = 0; -+ file_t *hidden_file = NULL; -+ -+ if (ftopd(file) != NULL) { -+ if(ftohf(file)) { -+ hidden_file = ftohf(file); -+ fput(hidden_file); -+ } -+ if(ftohf2(file)) { -+ hidden_file = ftohf2(file); -+ fput(hidden_file); -+ } -+ kfree(ftopd(file)); -+ } -+ return err; -+} -+ -+STATIC int -+mini_fo_fsync(file_t *file, dentry_t *dentry, int datasync) -+{ -+ int err1 = 0; -+ int err2 = 0; -+ file_t *hidden_file = NULL; -+ dentry_t *hidden_dentry; -+ -+ check_mini_fo_file(file); -+ -+ if ((hidden_file = ftohf(file)) != NULL) { -+ hidden_dentry = dtohd(dentry); -+ if (hidden_file->f_op && hidden_file->f_op->fsync) { -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_dentry->d_inode->i_sem); -+#endif -+ err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_dentry->d_inode->i_sem); -+#endif -+ } -+ } -+ -+ if ((hidden_file = ftohf2(file)) != NULL) { -+ hidden_dentry = dtohd2(dentry); -+ if (hidden_file->f_op && hidden_file->f_op->fsync) { -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_dentry->d_inode->i_sem); -+#endif -+ err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_dentry->d_inode->i_sem); -+#endif -+ } -+ } -+ else -+ goto err; -+ -+err: -+ return (err1 || err2); -+} -+ -+ -+STATIC int -+mini_fo_fasync(int fd, file_t *file, int flag) -+{ -+ int err1 = 0; -+ int err2 = 0; -+ -+ file_t *hidden_file = NULL; -+ -+ check_mini_fo_file(file); -+ -+ if((hidden_file = ftohf(file)) != NULL) { -+ err1 = hidden_file->f_op->fasync(fd, hidden_file, flag); -+ } -+ if((hidden_file = ftohf2(file)) != NULL) { -+ err2 = hidden_file->f_op->fasync(fd, hidden_file, flag); -+ } -+ -+ return (err1 || err2); -+} -+ -+ -+ -+struct file_operations mini_fo_dir_fops = -+ { -+ read: generic_read_dir, -+ write: mini_fo_write, -+ readdir: mini_fo_readdir, -+ poll: mini_fo_poll, -+ /* ioctl: mini_fo_ioctl, */ -+ mmap: mini_fo_mmap, -+ open: mini_fo_open, -+ flush: mini_fo_flush, -+ release: mini_fo_release, -+ fsync: mini_fo_fsync, -+ fasync: mini_fo_fasync, -+ /* not needed lock: mini_fo_lock, */ -+ /* not needed: readv */ -+ /* not needed: writev */ -+ /* not implemented: sendpage */ -+ /* not implemented: get_unmapped_area */ -+ }; -+ -+struct file_operations mini_fo_main_fops = -+ { -+ llseek: mini_fo_llseek, -+ read: mini_fo_read, -+ write: mini_fo_write, -+ readdir: mini_fo_readdir, -+ poll: mini_fo_poll, -+ /* ioctl: mini_fo_ioctl, */ -+ mmap: mini_fo_mmap, -+ open: mini_fo_open, -+ flush: mini_fo_flush, -+ release: mini_fo_release, -+ fsync: mini_fo_fsync, -+ fasync: mini_fo_fasync, -+ /* not needed: lock: mini_fo_lock, */ -+ /* not needed: readv */ -+ /* not needed: writev */ -+ /* not implemented: sendpage */ -+ /* not implemented: get_unmapped_area */ -+ }; -diff -urN linux-2.6.19.old/fs/mini_fo/fist.h linux-2.6.19.dev/fs/mini_fo/fist.h ---- linux-2.6.19.old/fs/mini_fo/fist.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/fist.h 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,252 @@ -+/* -+ * Copyright (c) 1997-2003 Erez Zadok -+ * Copyright (c) 2001-2003 Stony Brook University -+ * -+ * For specific licensing information, see the COPYING file distributed with -+ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING. -+ * -+ * This Copyright notice must be kept intact and distributed with all -+ * fistgen sources INCLUDING sources generated by fistgen. -+ */ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+ -+/* -+ * $Id$ -+ */ -+ -+#ifndef __FIST_H_ -+#define __FIST_H_ -+ -+/* -+ * KERNEL ONLY CODE: -+ */ -+#ifdef __KERNEL__ -+#include -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -+#include -+#else -+#include -+#endif -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+#ifdef CONFIG_MODVERSIONS -+# define MODVERSIONS -+# include -+#endif /* CONFIG_MODVERSIONS */ -+#endif /* KERNEL_VERSION < 2.6.0 */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+#include -+#else -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) -+#include -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+#include -+#endif -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+/* -+ * MACROS: -+ */ -+ -+/* those mapped to ATTR_* were copied from linux/fs.h */ -+#define FA_MODE ATTR_MODE -+#define FA_UID ATTR_UID -+#define FA_GID ATTR_GID -+#define FA_SIZE ATTR_SIZE -+#define FA_ATIME ATTR_ATIME -+#define FA_MTIME ATTR_MTIME -+#define FA_CTIME ATTR_CTIME -+#define FA_ATIME_SET ATTR_ATIME_SET -+#define FA_MTIME_SET ATTR_MTIME_SET -+#define FA_FORCE ATTR_FORCE -+#define FA_ATTR_FLAGS ATTR_ATTR_FLAG -+ -+/* must be greater than all other ATTR_* flags! */ -+#define FA_NLINK 2048 -+#define FA_BLKSIZE 4096 -+#define FA_BLOCKS 8192 -+#define FA_TIMES (FA_ATIME|FA_MTIME|FA_CTIME) -+#define FA_ALL 0 -+ -+/* macros to manage changes between kernels */ -+#define INODE_DATA(i) (&(i)->i_data) -+ -+#define MIN(x,y) ((x < y) ? (x) : (y)) -+#define MAX(x,y) ((x > y) ? (x) : (y)) -+#define MAXPATHLEN PATH_MAX -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) -+# define lookup_one_len(a,b,c) lookup_one(a,b) -+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) */ -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) -+# define generic_file_llseek default_llseek -+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) */ -+ -+#ifndef SEEK_SET -+# define SEEK_SET 0 -+#endif /* not SEEK_SET */ -+ -+#ifndef SEEK_CUR -+# define SEEK_CUR 1 -+#endif /* not SEEK_CUR */ -+ -+#ifndef SEEK_END -+# define SEEK_END 2 -+#endif /* not SEEK_END */ -+ -+#ifndef DEFAULT_POLLMASK -+# define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM) -+#endif /* not DEFAULT_POLLMASK */ -+ -+/* XXX: fix this so fistgen generates kfree() code directly */ -+#define kfree_s(a,b) kfree(a) -+ -+/* -+ * TYPEDEFS: -+ */ -+typedef struct dentry dentry_t; -+typedef struct file file_t; -+typedef struct inode inode_t; -+typedef inode_t vnode_t; -+typedef struct page page_t; -+typedef struct qstr qstr_t; -+typedef struct super_block super_block_t; -+typedef super_block_t vfs_t; -+typedef struct vm_area_struct vm_area_t; -+ -+ -+/* -+ * EXTERNALS: -+ */ -+ -+#define FPPF(str,page) printk("PPF %s 0x%x/%d: Lck:%d Err:%d Ref:%d Upd:%d Other::%d:%d:%d:%d:\n", \ -+ str, \ -+ (int) page, \ -+ (int) page->index, \ -+ (PageLocked(page) ? 1 : 0), \ -+ (PageError(page) ? 1 : 0), \ -+ (PageReferenced(page) ? 1 : 0), \ -+ (Page_Uptodate(page) ? 1 : 0), \ -+ (PageDecrAfter(page) ? 1 : 0), \ -+ (PageSlab(page) ? 1 : 0), \ -+ (PageSwapCache(page) ? 1 : 0), \ -+ (PageReserved(page) ? 1 : 0) \ -+ ) -+#define EZKDBG printk("EZK %s:%d:%s\n",__FILE__,__LINE__,__FUNCTION__) -+#if 0 -+# define EZKDBG1 printk("EZK %s:%d\n",__FILE__,__LINE__) -+#else -+# define EZKDBG1 -+#endif -+ -+extern int fist_get_debug_value(void); -+extern int fist_set_debug_value(int val); -+#if 0 /* mini_fo doesn't need these */ -+extern void fist_dprint_internal(int level, char *str,...); -+extern void fist_print_dentry(char *str, const dentry_t *dentry); -+extern void fist_print_inode(char *str, const inode_t *inode); -+extern void fist_print_file(char *str, const file_t *file); -+extern void fist_print_buffer_flags(char *str, struct buffer_head *buffer); -+extern void fist_print_page_flags(char *str, page_t *page); -+extern void fist_print_page_bytes(char *str, page_t *page); -+extern void fist_print_pte_flags(char *str, const page_t *page); -+extern void fist_checkinode(inode_t *inode, char *msg); -+extern void fist_print_sb(char *str, const super_block_t *sb); -+ -+/* §$% by mk: special debug functions */ -+extern void fist_mk_print_dentry(char *str, const dentry_t *dentry); -+extern void fist_mk_print_inode(char *str, const inode_t *inode); -+ -+extern char *add_indent(void); -+extern char *del_indent(void); -+#endif/* mini_fo doesn't need these */ -+ -+ -+#define STATIC -+#define ASSERT(EX) \ -+do { \ -+ if (!(EX)) { \ -+ printk(KERN_CRIT "ASSERTION FAILED: %s at %s:%d (%s)\n", #EX, \ -+ __FILE__, __LINE__, __FUNCTION__); \ -+ (*((char *)0))=0; \ -+ } \ -+} while (0) -+/* same ASSERT, but tell me who was the caller of the function */ -+#define ASSERT2(EX) \ -+do { \ -+ if (!(EX)) { \ -+ printk(KERN_CRIT "ASSERTION FAILED (caller): %s at %s:%d (%s)\n", #EX, \ -+ file, line, func); \ -+ (*((char *)0))=0; \ -+ } \ -+} while (0) -+ -+#if 0 /* mini_fo doesn't need these */ -+#define dprintk(format, args...) printk(KERN_DEBUG format, ##args) -+#define fist_dprint(level, str, args...) fist_dprint_internal(level, KERN_DEBUG str, ## args) -+#define print_entry_location() fist_dprint(4, "%sIN: %s %s:%d\n", add_indent(), __FUNCTION__, __FILE__, __LINE__) -+#define print_exit_location() fist_dprint(4, "%s OUT: %s %s:%d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__) -+#define print_exit_status(status) fist_dprint(4, "%s OUT: %s %s:%d, STATUS: %d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, status) -+#define print_exit_pointer(status) \ -+do { \ -+ if (IS_ERR(status)) \ -+ fist_dprint(4, "%s OUT: %s %s:%d, RESULT: %ld\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \ -+ else \ -+ fist_dprint(4, "%s OUT: %s %s:%d, RESULT: 0x%x\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \ -+} while (0) -+#endif/* mini_fo doesn't need these */ -+ -+#endif /* __KERNEL__ */ -+ -+ -+/* -+ * DEFINITIONS FOR USER AND KERNEL CODE: -+ * (Note: ioctl numbers 1--9 are reserved for fistgen, the rest -+ * are auto-generated automatically based on the user's .fist file.) -+ */ -+# define FIST_IOCTL_GET_DEBUG_VALUE _IOR(0x15, 1, int) -+# define FIST_IOCTL_SET_DEBUG_VALUE _IOW(0x15, 2, int) -+ -+#endif /* not __FIST_H_ */ -diff -urN linux-2.6.19.old/fs/mini_fo/inode.c linux-2.6.19.dev/fs/mini_fo/inode.c ---- linux-2.6.19.old/fs/mini_fo/inode.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/inode.c 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,1573 @@ -+/* -+ * Copyright (c) 1997-2003 Erez Zadok -+ * Copyright (c) 2001-2003 Stony Brook University -+ * -+ * For specific licensing information, see the COPYING file distributed with -+ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING. -+ * -+ * This Copyright notice must be kept intact and distributed with all -+ * fistgen sources INCLUDING sources generated by fistgen. -+ */ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+/* -+ * $Id$ -+ */ -+ -+#ifdef HAVE_CONFIG_H -+# include -+#endif -+ -+#include "fist.h" -+#include "mini_fo.h" -+ -+STATIC int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd) -+#else -+mini_fo_create(inode_t *dir, dentry_t *dentry, int mode) -+#endif -+{ -+ int err = 0; -+ -+ check_mini_fo_dentry(dentry); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ err = create_sto_reg_file(dentry, mode, nd); -+#else -+ err = create_sto_reg_file(dentry, mode); -+#endif -+ check_mini_fo_dentry(dentry); -+ return err; -+} -+ -+ -+STATIC dentry_t * -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+mini_fo_lookup(inode_t *dir, dentry_t *dentry, struct nameidata* nd) -+#else -+mini_fo_lookup(inode_t *dir, dentry_t *dentry) -+#endif -+{ -+ int err = 0; -+ dentry_t *hidden_dir_dentry; -+ dentry_t *hidden_dentry = NULL; -+ -+ dentry_t *hidden_sto_dir_dentry; -+ dentry_t *hidden_sto_dentry = NULL; -+ -+ /* whiteout flag */ -+ int del_flag = 0; -+ char *bpath = NULL; -+ -+ const char *name; -+ unsigned int namelen; -+ -+ /* Don't allow lookups of META-files */ -+ namelen = strlen(META_FILENAME); -+ if(namelen == dentry->d_name.len) { -+ if(!strncmp(dentry->d_name.name, META_FILENAME, namelen)) { -+ err = -ENOENT; -+ goto out; -+ } -+ } -+ -+ hidden_dir_dentry = dtohd(dentry->d_parent); -+ hidden_sto_dir_dentry = dtohd2(dentry->d_parent); -+ -+ name = dentry->d_name.name; -+ namelen = dentry->d_name.len; -+ -+ /* must initialize dentry operations */ -+ dentry->d_op = &mini_fo_dops; -+ -+ /* setup the del_flag */ -+ del_flag = __meta_check_d_entry(dir, name, namelen); -+ bpath = __meta_check_r_entry(dir, name, namelen); -+ -+ /* perform the lookups of base and storage files: -+ * -+ * This caused some serious trouble, as a lookup_one_len passing -+ * a negative dentry oopses. Solution is to only do the lookup -+ * if the dentry is positive, else we set it to NULL -+ * More trouble, who said a *_dir_dentry can't be NULL? -+ */ -+ if(bpath) { -+ /* Cross-Interposing (C), yeah! */ -+ hidden_dentry = bpath_walk(dir->i_sb, bpath); -+ if(!hidden_dentry || !hidden_dentry->d_inode) { -+ printk(KERN_CRIT "mini_fo_lookup: bpath_walk failed.\n"); -+ err= -EINVAL; -+ goto out; -+ } -+ -+ /* this can be set up safely without fear of spaghetti -+ * interposing as it is only used for copying times */ -+ hidden_dir_dentry = hidden_dentry->d_parent; -+ kfree(bpath); -+ } -+ else if(hidden_dir_dentry && hidden_dir_dentry->d_inode) -+ hidden_dentry = -+ lookup_one_len(name, hidden_dir_dentry, namelen); -+ else -+ hidden_dentry = NULL; -+ -+ if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode) -+ hidden_sto_dentry = -+ lookup_one_len(name, hidden_sto_dir_dentry, namelen); -+ else -+ hidden_sto_dentry = NULL; -+ -+ /* catch error in lookup */ -+ if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) { -+ /* mk: we need to call dput on the dentry, whose -+ * lookup_one_len operation failed, in order to avoid -+ * unmount trouble. -+ */ -+ if(IS_ERR(hidden_dentry)) { -+ printk(KERN_CRIT "mini_fo_lookup: ERR from base dentry, lookup failed.\n"); -+ err = PTR_ERR(hidden_dentry); -+ } else { -+ dput(hidden_dentry); -+ } -+ if(IS_ERR(hidden_sto_dentry)) { -+ printk(KERN_CRIT "mini_fo_lookup: ERR from storage dentry, lookup failed.\n"); -+ err = PTR_ERR(hidden_sto_dentry); -+ } else { -+ dput(hidden_sto_dentry); -+ } -+ goto out; -+ } -+ -+ /* allocate dentry private data */ -+ __dtopd(dentry) = (struct mini_fo_dentry_info *) -+ kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL); -+ -+ if (!dtopd(dentry)) { -+ err = -ENOMEM; -+ goto out_dput; -+ } -+ -+ /* check for different states of the mini_fo file to be looked up. */ -+ -+ /* state 1, file has been modified */ -+ if(hidden_dentry && hidden_sto_dentry && -+ hidden_dentry->d_inode && hidden_sto_dentry->d_inode && !del_flag) { -+ -+ /* update parent directory's atime */ -+ fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode); -+ -+ dtopd(dentry)->state = MODIFIED; -+ dtohd(dentry) = hidden_dentry; -+ dtohd2(dentry) = hidden_sto_dentry; -+ -+ err = mini_fo_tri_interpose(hidden_dentry, -+ hidden_sto_dentry, -+ dentry, dir->i_sb, 1); -+ if (err) { -+ printk(KERN_CRIT "mini_fo_lookup: error interposing (state1).\n"); -+ goto out_free; -+ } -+ goto out; -+ } -+ /* state 2, file is unmodified */ -+ if(hidden_dentry && hidden_dentry->d_inode && !del_flag) { -+ -+ fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode); -+ -+ dtopd(dentry)->state = UNMODIFIED; -+ dtohd(dentry) = hidden_dentry; -+ dtohd2(dentry) = hidden_sto_dentry; /* could be negative */ -+ -+ err = mini_fo_tri_interpose(hidden_dentry, -+ hidden_sto_dentry, -+ dentry, dir->i_sb, 1); -+ if (err) { -+ printk(KERN_CRIT "mini_fo_lookup: error interposing (state2).\n"); -+ goto out_free; -+ } -+ goto out; -+ } -+ /* state 3, file has been newly created */ -+ if(hidden_sto_dentry && hidden_sto_dentry->d_inode && !del_flag) { -+ -+ fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode); -+ dtopd(dentry)->state = CREATED; -+ dtohd(dentry) = hidden_dentry; /* could be negative */ -+ dtohd2(dentry) = hidden_sto_dentry; -+ -+ err = mini_fo_tri_interpose(hidden_dentry, -+ hidden_sto_dentry, -+ dentry, dir->i_sb, 1); -+ if (err) { -+ printk(KERN_CRIT "mini_fo_lookup: error interposing (state3).\n"); -+ goto out_free; -+ } -+ goto out; -+ } -+ -+ /* state 4, file has deleted and created again. */ -+ if(hidden_dentry && hidden_sto_dentry && -+ hidden_dentry->d_inode && -+ hidden_sto_dentry->d_inode && del_flag) { -+ -+ fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode); -+ dtopd(dentry)->state = DEL_REWRITTEN; -+ dtohd(dentry) = NULL; -+ dtohd2(dentry) = hidden_sto_dentry; -+ -+ err = mini_fo_tri_interpose(NULL, -+ hidden_sto_dentry, -+ dentry, dir->i_sb, 1); -+ if (err) { -+ printk(KERN_CRIT "mini_fo_lookup: error interposing (state4).\n"); -+ goto out_free; -+ } -+ /* We will never need this dentry again, as the file has been -+ * deleted from base */ -+ dput(hidden_dentry); -+ goto out; -+ } -+ /* state 5, file has been deleted in base */ -+ if(hidden_dentry && hidden_sto_dentry && -+ hidden_dentry->d_inode && -+ !hidden_sto_dentry->d_inode && del_flag) { -+ -+ /* check which parents atime we need for updating */ -+ if(hidden_sto_dir_dentry->d_inode) -+ fist_copy_attr_atime(dir, -+ hidden_sto_dir_dentry->d_inode); -+ else -+ fist_copy_attr_atime(dir, -+ hidden_dir_dentry->d_inode); -+ -+ dtopd(dentry)->state = DELETED; -+ dtohd(dentry) = NULL; -+ dtohd2(dentry) = hidden_sto_dentry; -+ -+ /* add negative dentry to dcache to speed up lookups */ -+ d_add(dentry, NULL); -+ dput(hidden_dentry); -+ goto out; -+ } -+ /* state 6, file does not exist */ -+ if(((hidden_dentry && !hidden_dentry->d_inode) || -+ (hidden_sto_dentry && !hidden_sto_dentry->d_inode)) && !del_flag) -+ { -+ /* check which parents atime we need for updating */ -+ if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode) -+ fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode); -+ else -+ fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode); -+ -+ dtopd(dentry)->state = NON_EXISTANT; -+ dtohd(dentry) = hidden_dentry; -+ dtohd2(dentry) = hidden_sto_dentry; -+ d_add(dentry, NULL); -+ goto out; -+ } -+ -+ /* if we get to here, were in an invalid state. bad. */ -+ printk(KERN_CRIT "mini_fo_lookup: ERROR, meta data corruption detected.\n"); -+ -+ /* end state checking */ -+ out_free: -+ d_drop(dentry); /* so that our bad dentry will get destroyed */ -+ kfree(dtopd(dentry)); -+ __dtopd(dentry) = NULL; /* be safe */ -+ -+ out_dput: -+ if(hidden_dentry) -+ dput(hidden_dentry); -+ if(hidden_sto_dentry) -+ dput(hidden_sto_dentry); /* drops usage count and marks for release */ -+ -+ out: -+ /* initalize wol if file exists and is directory */ -+ if(dentry->d_inode) { -+ if(S_ISDIR(dentry->d_inode->i_mode)) { -+ itopd(dentry->d_inode)->deleted_list_size = -1; -+ itopd(dentry->d_inode)->renamed_list_size = -1; -+ meta_build_lists(dentry); -+ } -+ } -+ return ERR_PTR(err); -+} -+ -+ -+STATIC int -+mini_fo_link(dentry_t *old_dentry, inode_t *dir, dentry_t *new_dentry) -+{ -+ int err; -+ dentry_t *hidden_old_dentry; -+ dentry_t *hidden_new_dentry; -+ dentry_t *hidden_dir_dentry; -+ -+ -+ check_mini_fo_dentry(old_dentry); -+ check_mini_fo_dentry(new_dentry); -+ check_mini_fo_inode(dir); -+ -+ /* no links to directorys and existing targets target allowed */ -+ if(S_ISDIR(old_dentry->d_inode->i_mode) || -+ is_mini_fo_existant(new_dentry)) { -+ err = -EPERM; -+ goto out; -+ } -+ -+ /* bring it directly from unmod to del_rew */ -+ if(dtost(old_dentry) == UNMODIFIED) { -+ err = nondir_unmod_to_mod(old_dentry, 1); -+ if(err) { -+ err = -EINVAL; -+ goto out; -+ } -+ err = meta_add_d_entry(old_dentry->d_parent, -+ old_dentry->d_name.name, -+ old_dentry->d_name.len); -+ if(err) { -+ err = -EINVAL; -+ goto out; -+ } -+ dput(dtohd(old_dentry)); -+ dtohd(old_dentry) = NULL; -+ dtost(old_dentry) = DEL_REWRITTEN; -+ } -+ -+ err = get_neg_sto_dentry(new_dentry); -+ if(err) { -+ err = -EINVAL; -+ goto out; -+ } -+ -+ hidden_old_dentry = dtohd2(old_dentry); -+ hidden_new_dentry = dtohd2(new_dentry); -+ -+ dget(hidden_old_dentry); -+ dget(hidden_new_dentry); -+ -+ /* was: hidden_dir_dentry = lock_parent(hidden_new_dentry); */ -+ hidden_dir_dentry = dget(hidden_new_dentry->d_parent); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_dir_dentry->d_inode->i_sem); -+#endif -+ -+ err = vfs_link(hidden_old_dentry, -+ hidden_dir_dentry->d_inode, -+ hidden_new_dentry); -+ if (err || !hidden_new_dentry->d_inode) -+ goto out_lock; -+ -+ dtost(new_dentry) = CREATED; -+ err = mini_fo_tri_interpose(NULL, hidden_new_dentry, new_dentry, dir->i_sb, 0); -+ if (err) -+ goto out_lock; -+ -+ fist_copy_attr_timesizes(dir, hidden_new_dentry->d_inode); -+ /* propagate number of hard-links */ -+ old_dentry->d_inode->i_nlink = itohi2(old_dentry->d_inode)->i_nlink; -+ -+ out_lock: -+ /* was: unlock_dir(hidden_dir_dentry); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_dir_dentry); -+ -+ dput(hidden_new_dentry); -+ dput(hidden_old_dentry); -+ if (!new_dentry->d_inode) -+ d_drop(new_dentry); -+ -+ out: -+ return err; -+} -+ -+ -+STATIC int -+mini_fo_unlink(inode_t *dir, dentry_t *dentry) -+{ -+ int err = 0; -+ -+ dget(dentry); -+ if(dtopd(dentry)->state == MODIFIED) { -+ err = nondir_mod_to_del(dentry); -+ goto out; -+ } -+ else if(dtopd(dentry)->state == UNMODIFIED) { -+ err = nondir_unmod_to_del(dentry); -+ goto out; -+ } -+ else if(dtopd(dentry)->state == CREATED) { -+ err = nondir_creat_to_del(dentry); -+ goto out; -+ } -+ else if(dtopd(dentry)->state == DEL_REWRITTEN) { -+ err = nondir_del_rew_to_del(dentry); -+ goto out; -+ } -+ -+ printk(KERN_CRIT "mini_fo_unlink: ERROR, invalid state detected.\n"); -+ -+ out: -+ fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode)); -+ -+ if(!err) { -+ /* is this causing my pain? d_delete(dentry); */ -+ d_drop(dentry); -+ } -+ -+ dput(dentry); -+ return err; -+} -+ -+ -+STATIC int -+mini_fo_symlink(inode_t *dir, dentry_t *dentry, const char *symname) -+{ -+ int err=0; -+ dentry_t *hidden_sto_dentry; -+ dentry_t *hidden_sto_dir_dentry; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ umode_t mode; -+#endif -+ -+ /* Fail if the symlink file exists */ -+ if(!(dtost(dentry) == DELETED || -+ dtost(dentry) == NON_EXISTANT)) { -+ err = -EEXIST; -+ goto out; -+ } -+ -+ err = get_neg_sto_dentry(dentry); -+ if(err) { -+ err = -EINVAL; -+ goto out; -+ } -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ dget(hidden_sto_dentry); -+ /* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ mode = S_IALLUGO; -+ err = vfs_symlink(hidden_sto_dir_dentry->d_inode, -+ hidden_sto_dentry, symname, mode); -+#else -+ err = vfs_symlink(hidden_sto_dir_dentry->d_inode, -+ hidden_sto_dentry, -+ symname); -+#endif -+ if (err || !hidden_sto_dentry->d_inode) -+ goto out_lock; -+ -+ if(dtost(dentry) == DELETED) { -+ dtost(dentry) = DEL_REWRITTEN; -+ err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0); -+ if(err) -+ goto out_lock; -+ } else if(dtost(dentry) == NON_EXISTANT) { -+ dtost(dentry) = CREATED; -+ err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0); -+ if(err) -+ goto out_lock; -+ } -+ fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode); -+ -+ out_lock: -+ /* was: unlock_dir(hidden_sto_dir_dentry); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ -+ dput(hidden_sto_dentry); -+ if (!dentry->d_inode) -+ d_drop(dentry); -+ out: -+ return err; -+} -+ -+STATIC int -+mini_fo_mkdir(inode_t *dir, dentry_t *dentry, int mode) -+{ -+ int err; -+ -+ err = create_sto_dir(dentry, mode); -+ -+ check_mini_fo_dentry(dentry); -+ -+ return err; -+} -+ -+ -+STATIC int -+mini_fo_rmdir(inode_t *dir, dentry_t *dentry) -+{ -+ int err = 0; -+ -+ dentry_t *hidden_sto_dentry; -+ dentry_t *hidden_sto_dir_dentry; -+ dentry_t *meta_dentry; -+ inode_t *hidden_sto_dir = NULL; -+ -+ check_mini_fo_dentry(dentry); -+ check_mini_fo_inode(dir); -+ -+ dget(dentry); -+ if(dtopd(dentry)->state == MODIFIED) { -+ /* XXX: disabled, because it does not bother to check files on -+ * the original filesystem - just a hack, but better than simply -+ * removing it without testing */ -+ err = -EINVAL; -+ goto out; -+ -+ hidden_sto_dir = itohi2(dir); -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ /* was:hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ /* avoid destroying the hidden inode if the file is in use */ -+ dget(hidden_sto_dentry); -+ -+ /* Delete an old WOL file contained in the storage dir */ -+ meta_dentry = lookup_one_len(META_FILENAME, -+ hidden_sto_dentry, -+ strlen(META_FILENAME)); -+ if(meta_dentry->d_inode) { -+ err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry); -+ dput(meta_dentry); -+ if(!err) -+ d_delete(meta_dentry); -+ } -+ -+ err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry); -+ dput(hidden_sto_dentry); -+ if(!err) -+ d_delete(hidden_sto_dentry); -+ -+ /* propagate number of hard-links */ -+ dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink; -+ -+ dput(dtohd(dentry)); -+ -+ dtohd(dentry) = NULL; -+ dtopd(dentry)->state = DELETED; -+ -+ /* carefull with R files */ -+ if( __meta_is_r_entry(dir, -+ dentry->d_name.name, -+ dentry->d_name.len) == 1) { -+ err = meta_remove_r_entry(dentry->d_parent, -+ dentry->d_name.name, -+ dentry->d_name.len); -+ if(err) { -+ printk(KERN_CRIT "mini_fo: rmdir: meta_remove_r_entry failed.\n"); -+ goto out; -+ } -+ } -+ else { -+ /* ok, add deleted file to META */ -+ meta_add_d_entry(dentry->d_parent, -+ dentry->d_name.name, -+ dentry->d_name.len); -+ } -+ /* was: unlock_dir(hidden_sto_dir_dentry); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ goto out; -+ } -+ else if(dtopd(dentry)->state == UNMODIFIED) { -+ /* XXX: simply adding it to the delete list here is fscking dangerous! -+ * as a temporary hack, i will disable rmdir on unmodified directories -+ * for now. -+ */ -+ err = -EINVAL; -+ goto out; -+ -+ err = get_neg_sto_dentry(dentry); -+ if(err) { -+ err = -EINVAL; -+ goto out; -+ } -+ -+ /* dput base dentry, this will relase the inode and free the -+ * dentry, as we will never need it again. */ -+ dput(dtohd(dentry)); -+ dtohd(dentry) = NULL; -+ dtopd(dentry)->state = DELETED; -+ -+ /* add deleted file to META-file */ -+ meta_add_d_entry(dentry->d_parent, -+ dentry->d_name.name, -+ dentry->d_name.len); -+ goto out; -+ } -+ else if(dtopd(dentry)->state == CREATED) { -+ hidden_sto_dir = itohi2(dir); -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ /* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ /* avoid destroying the hidden inode if the file is in use */ -+ dget(hidden_sto_dentry); -+ -+ /* Delete an old WOL file contained in the storage dir */ -+ meta_dentry = lookup_one_len(META_FILENAME, -+ hidden_sto_dentry, -+ strlen(META_FILENAME)); -+ if(meta_dentry->d_inode) { -+ /* is this necessary? dget(meta_dentry); */ -+ err = vfs_unlink(hidden_sto_dentry->d_inode, -+ meta_dentry); -+ dput(meta_dentry); -+ if(!err) -+ d_delete(meta_dentry); -+ } -+ -+ err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry); -+ dput(hidden_sto_dentry); -+ if(!err) -+ d_delete(hidden_sto_dentry); -+ -+ /* propagate number of hard-links */ -+ dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink; -+ dtopd(dentry)->state = NON_EXISTANT; -+ -+ /* was: unlock_dir(hidden_sto_dir_dentry); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ -+ goto out; -+ } -+ else if(dtopd(dentry)->state == DEL_REWRITTEN) { -+ hidden_sto_dir = itohi2(dir); -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ /* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ /* avoid destroying the hidden inode if the file is in use */ -+ dget(hidden_sto_dentry); -+ -+ /* Delete an old WOL file contained in the storage dir */ -+ meta_dentry = lookup_one_len(META_FILENAME, -+ hidden_sto_dentry, -+ strlen(META_FILENAME)); -+ if(meta_dentry->d_inode) { -+ /* is this necessary? dget(meta_dentry); */ -+ err = vfs_unlink(hidden_sto_dentry->d_inode, -+ meta_dentry); -+ dput(meta_dentry); -+ if(!err) -+ d_delete(meta_dentry); -+ } -+ -+ err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry); -+ dput(hidden_sto_dentry); -+ if(!err) -+ d_delete(hidden_sto_dentry); -+ -+ /* propagate number of hard-links */ -+ dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink; -+ dtopd(dentry)->state = DELETED; -+ /* was: unlock_dir(hidden_sto_dir_dentry); */ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ goto out; -+ } -+ -+ printk(KERN_CRIT "mini_fo_rmdir: ERROR, invalid state detected.\n"); -+ -+ out: -+ if(!err) { -+ d_drop(dentry); -+ } -+ -+ fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode)); -+ dput(dentry); -+ -+ return err; -+} -+ -+ -+STATIC int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, dev_t dev) -+#else -+mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, int dev) -+#endif -+{ -+ int err = 0; -+ -+ check_mini_fo_dentry(dentry); -+ -+ err = create_sto_nod(dentry, mode, dev); -+ if(err) { -+ printk(KERN_CRIT "mini_fo_mknod: creating sto nod failed.\n"); -+ err = -EINVAL; -+ } -+ -+ check_mini_fo_dentry(dentry); -+ return err; -+} -+ -+ -+STATIC int -+mini_fo_rename(inode_t *old_dir, dentry_t *old_dentry, -+ inode_t *new_dir, dentry_t *new_dentry) -+{ -+ /* dispatch */ -+ if(S_ISDIR(old_dentry->d_inode->i_mode)) -+ return rename_directory(old_dir, old_dentry, new_dir, new_dentry); -+ return rename_nondir(old_dir, old_dentry, new_dir, new_dentry); -+ -+} -+ -+int rename_directory(inode_t *old_dir, dentry_t *old_dentry, -+ inode_t *new_dir, dentry_t *new_dentry) -+{ -+ int err, bpath_len; -+ char *bpath; -+ -+ dentry_t *hidden_old_dentry; -+ dentry_t *hidden_new_dentry; -+ dentry_t *hidden_old_dir_dentry; -+ dentry_t *hidden_new_dir_dentry; -+ -+ err = 0; -+ bpath = NULL; -+ bpath_len = 0; -+ -+ /* this is a test, chuck out if it works */ -+ if(!(dtopd(new_dentry)->state == DELETED || -+ dtopd(new_dentry)->state == NON_EXISTANT)) { -+ printk(KERN_CRIT "mini_fo: rename_directory: \ -+ uh, ah, new_dentry not negative.\n"); -+ /* return -1; */ -+ } -+ -+ /* state = UNMODIFIED */ -+ if(dtopd(old_dentry)->state == UNMODIFIED) { -+ err = dir_unmod_to_mod(old_dentry); -+ if (err) -+ goto out; -+ } -+ -+ /* state = MODIFIED */ -+ if(dtopd(old_dentry)->state == MODIFIED) { -+ bpath = meta_check_r_entry(old_dentry->d_parent, -+ old_dentry->d_name.name, -+ old_dentry->d_name.len); -+ if(bpath) { -+ err = meta_remove_r_entry(old_dentry->d_parent, -+ old_dentry->d_name.name, -+ old_dentry->d_name.len); -+ if(err) { -+ printk(KERN_CRIT "mini_fo: rename_directory:\ -+ meta_remove_r_entry \ -+ failed.\n"); -+ goto out; -+ } -+ err = meta_add_r_entry(new_dentry->d_parent, -+ bpath, -+ strlen(bpath), -+ new_dentry->d_name.name, -+ new_dentry->d_name.len); -+ kfree(bpath); -+ } -+ else {/* wol it */ -+ err = meta_add_d_entry(old_dentry->d_parent, -+ old_dentry->d_name.name, -+ old_dentry->d_name.len); -+ if (err) -+ goto out; -+ /* put it on rename list */ -+ err = get_mini_fo_bpath(old_dentry, -+ &bpath, -+ &bpath_len); -+ if (err) -+ goto out; -+ err = meta_add_r_entry(new_dentry->d_parent, -+ bpath, bpath_len, -+ new_dentry->d_name.name, -+ new_dentry->d_name.len); -+ if (err) -+ goto out; -+ } -+ /* no state change, MODIFIED stays MODIFIED */ -+ } -+ /* state = CREATED */ -+ if(dtopd(old_dentry)->state == CREATED || -+ dtopd(old_dentry)->state == DEL_REWRITTEN) { -+ if(dtohd(old_dentry)) -+ dput(dtohd(old_dentry)); -+ -+ if(dtopd(new_dentry)->state == DELETED) { -+ dtopd(old_dentry)->state = DEL_REWRITTEN; -+ dtohd(old_dentry) = NULL; -+ } -+ else if(dtopd(new_dentry)->state == NON_EXISTANT) { -+ dtopd(old_dentry)->state = CREATED; -+ /* steal new dentry's neg. base dentry */ -+ dtohd(old_dentry) = dtohd(new_dentry); -+ dtohd(new_dentry) = NULL; -+ } -+ } -+ if(dtopd(new_dentry)->state == UNMODIFIED || -+ dtopd(new_dentry)->state == NON_EXISTANT) { -+ err = get_neg_sto_dentry(new_dentry); -+ if(err) -+ goto out; -+ } -+ -+ /* now move sto file */ -+ hidden_old_dentry = dtohd2(old_dentry); -+ hidden_new_dentry = dtohd2(new_dentry); -+ -+ dget(hidden_old_dentry); -+ dget(hidden_new_dentry); -+ -+ hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent); -+ hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent); -+ double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry); -+ -+ err = vfs_rename(hidden_old_dir_dentry->d_inode, hidden_old_dentry, -+ hidden_new_dir_dentry->d_inode, hidden_new_dentry); -+ if(err) -+ goto out_lock; -+ -+ fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode); -+ if (new_dir != old_dir) -+ fist_copy_attr_all(old_dir, -+ hidden_old_dir_dentry->d_inode); -+ -+ out_lock: -+ /* double_unlock will dput the new/old parent dentries -+ * whose refcnts were incremented via get_parent above. */ -+ double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry); -+ dput(hidden_new_dentry); -+ dput(hidden_old_dentry); -+ -+ out: -+ return err; -+} -+ -+int rename_nondir(inode_t *old_dir, dentry_t *old_dentry, -+ inode_t *new_dir, dentry_t *new_dentry) -+{ -+ int err=0; -+ -+ check_mini_fo_dentry(old_dentry); -+ check_mini_fo_dentry(new_dentry); -+ check_mini_fo_inode(old_dir); -+ check_mini_fo_inode(new_dir); -+ -+ /* state: UNMODIFIED */ -+ if(dtost(old_dentry) == UNMODIFIED) { -+ err = nondir_unmod_to_mod(old_dentry, 1); -+ if(err) { -+ err = -EINVAL; -+ goto out; -+ } -+ } -+ -+ /* the easy states */ -+ if(exists_in_storage(old_dentry)) { -+ -+ dentry_t *hidden_old_dentry; -+ dentry_t *hidden_new_dentry; -+ dentry_t *hidden_old_dir_dentry; -+ dentry_t *hidden_new_dir_dentry; -+ -+ /* if old file is MODIFIED, add it to the deleted_list */ -+ if(dtopd(old_dentry)->state == MODIFIED) { -+ meta_add_d_entry(old_dentry->d_parent, -+ old_dentry->d_name.name, -+ old_dentry->d_name.len); -+ -+ dput(dtohd(old_dentry)); -+ } -+ /* if old file is CREATED, we only release the base dentry */ -+ if(dtopd(old_dentry)->state == CREATED) { -+ if(dtohd(old_dentry)) -+ dput(dtohd(old_dentry)); -+ } -+ -+ /* now setup the new states (depends on new_dentry state) */ -+ /* new dentry state = MODIFIED */ -+ if(dtopd(new_dentry)->state == MODIFIED) { -+ meta_add_d_entry(new_dentry->d_parent, -+ new_dentry->d_name.name, -+ new_dentry->d_name.len); -+ -+ /* new dentry will be d_put'ed later by the vfs -+ * so don't do it here -+ * dput(dtohd(new_dentry)); -+ */ -+ dtohd(old_dentry) = NULL; -+ dtopd(old_dentry)->state = DEL_REWRITTEN; -+ } -+ /* new dentry state = UNMODIFIED */ -+ else if(dtopd(new_dentry)->state == UNMODIFIED) { -+ if(get_neg_sto_dentry(new_dentry)) -+ return -EINVAL; -+ -+ meta_add_d_entry(new_dentry->d_parent, -+ new_dentry->d_name.name, -+ new_dentry->d_name.len); -+ -+ /* is this right??? */ -+ /*dput(dtohd(new_dentry));*/ -+ dtohd(old_dentry) = NULL; -+ dtopd(old_dentry)->state = DEL_REWRITTEN; -+ } -+ /* new dentry state = CREATED */ -+ else if(dtopd(new_dentry)->state == CREATED) { -+ /* we keep the neg. base dentry (if exists) */ -+ dtohd(old_dentry) = dtohd(new_dentry); -+ /* ...and set it to Null, or we'll get -+ * dcache.c:345 if it gets dput twice... */ -+ dtohd(new_dentry) = NULL; -+ dtopd(old_dentry)->state = CREATED; -+ } -+ /* new dentry state = NON_EXISTANT */ -+ else if(dtopd(new_dentry)->state == NON_EXISTANT) { -+ if(get_neg_sto_dentry(new_dentry)) -+ return -EINVAL; -+ -+ /* we keep the neg. base dentry (if exists) */ -+ dtohd(old_dentry) = dtohd(new_dentry); -+ /* ...and set it to Null, or we'll get -+ * Dr. dcache.c:345 if it gets dput twice... */ -+ dtohd(new_dentry) = NULL; -+ dtopd(old_dentry)->state = CREATED; -+ } -+ /* new dentry state = DEL_REWRITTEN or DELETED */ -+ else if(dtopd(new_dentry)->state == DEL_REWRITTEN || -+ dtopd(new_dentry)->state == DELETED) { -+ dtohd(old_dentry) = NULL; -+ dtopd(old_dentry)->state = DEL_REWRITTEN; -+ } -+ else { /* not possible, uhh, ahh */ -+ printk(KERN_CRIT -+ "mini_fo: rename_reg_file: invalid state detected [1].\n"); -+ return -1; -+ } -+ -+ /* now we definitely have a sto file */ -+ hidden_old_dentry = dtohd2(old_dentry); -+ hidden_new_dentry = dtohd2(new_dentry); -+ -+ dget(hidden_old_dentry); -+ dget(hidden_new_dentry); -+ -+ hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent); -+ hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent); -+ double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry); -+ -+ err = vfs_rename(hidden_old_dir_dentry->d_inode, -+ hidden_old_dentry, -+ hidden_new_dir_dentry->d_inode, -+ hidden_new_dentry); -+ if(err) -+ goto out_lock; -+ -+ fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode); -+ if (new_dir != old_dir) -+ fist_copy_attr_all(old_dir, hidden_old_dir_dentry->d_inode); -+ -+ out_lock: -+ /* double_unlock will dput the new/old parent dentries -+ * whose refcnts were incremented via get_parent above. -+ */ -+ double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry); -+ dput(hidden_new_dentry); -+ dput(hidden_old_dentry); -+ out: -+ return err; -+ } -+ else { /* invalid state */ -+ printk(KERN_CRIT "mini_fo: rename_reg_file: ERROR: invalid state detected [2].\n"); -+ return -1; -+ } -+} -+ -+ -+STATIC int -+mini_fo_readlink(dentry_t *dentry, char *buf, int bufsiz) -+{ -+ int err=0; -+ dentry_t *hidden_dentry = NULL; -+ -+ if(dtohd2(dentry) && dtohd2(dentry)->d_inode) { -+ hidden_dentry = dtohd2(dentry); -+ } else if(dtohd(dentry) && dtohd(dentry)->d_inode) { -+ hidden_dentry = dtohd(dentry); -+ } else { -+ goto out; -+ } -+ -+ if (!hidden_dentry->d_inode->i_op || -+ !hidden_dentry->d_inode->i_op->readlink) { -+ err = -EINVAL; goto out; -+ } -+ -+ err = hidden_dentry->d_inode->i_op->readlink(hidden_dentry, -+ buf, -+ bufsiz); -+ if (err > 0) -+ fist_copy_attr_atime(dentry->d_inode, hidden_dentry->d_inode); -+ -+ out: -+ return err; -+} -+ -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) -+static int mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd) -+#else -+static void* mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd) -+#endif -+{ -+ char *buf; -+ int len = PAGE_SIZE, err; -+ mm_segment_t old_fs; -+ -+ /* in 2.6 this is freed by mini_fo_put_link called by __do_follow_link */ -+ buf = kmalloc(len, GFP_KERNEL); -+ if (!buf) { -+ err = -ENOMEM; -+ goto out; -+ } -+ -+ /* read the symlink, and then we will follow it */ -+ old_fs = get_fs(); -+ set_fs(KERNEL_DS); -+ err = dentry->d_inode->i_op->readlink(dentry, buf, len); -+ set_fs(old_fs); -+ if (err < 0) { -+ kfree(buf); -+ buf = NULL; -+ goto out; -+ } -+ buf[err] = 0; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ nd_set_link(nd, buf); -+ err = 0; -+#else -+ err = vfs_follow_link(nd, buf); -+#endif -+ -+ out: -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ kfree(buf); -+#endif -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) -+ return err; -+#else -+ return ERR_PTR(err); -+#endif -+} -+ -+STATIC -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) -+void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd) -+#else -+void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie) -+#endif -+{ -+ char *link; -+ link = nd_get_link(nd); -+ kfree(link); -+} -+#endif -+ -+STATIC int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd) -+#else -+mini_fo_permission(inode_t *inode, int mask) -+#endif -+{ -+ inode_t *hidden_inode; -+ int mode; -+ int err; -+ -+ if(itohi2(inode)) { -+ hidden_inode = itohi2(inode); -+ } else { -+ hidden_inode = itohi(inode); -+ } -+ mode = inode->i_mode; -+ -+ /* not really needed, as permission handles everything: -+ * err = vfs_permission(inode, mask); -+ * if (err) -+ * goto out; -+ */ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ err = permission(hidden_inode, mask, nd); -+#else -+ err = permission(hidden_inode, mask); -+#endif -+ -+ /* out: */ -+ return err; -+} -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+STATIC int -+mini_fo_inode_revalidate(dentry_t *dentry) -+{ -+ int err = 0; -+ dentry_t *hidden_dentry; -+ inode_t *hidden_inode; -+ -+ ASSERT(dentry->d_inode); -+ ASSERT(itopd(dentry->d_inode)); -+ -+ if(itohi2(dentry->d_inode)) { -+ hidden_dentry = dtohd2(dentry); -+ hidden_inode = hidden_dentry->d_inode; -+ } else if(itohi(dentry->d_inode)) { -+ hidden_dentry = dtohd(dentry); -+ hidden_inode = hidden_dentry->d_inode; -+ } else { -+ printk(KERN_CRIT "mini_fo_inode_revalidate: ERROR, invalid state detected.\n"); -+ err = -ENOENT; -+ goto out; -+ } -+ if (hidden_inode && hidden_inode->i_op && hidden_inode->i_op->revalidate){ -+ err = hidden_inode->i_op->revalidate(hidden_dentry); -+ if (err) -+ goto out; -+ } -+ fist_copy_attr_all(dentry->d_inode, hidden_inode); -+ out: -+ return err; -+} -+#endif -+ -+STATIC int -+mini_fo_setattr(dentry_t *dentry, struct iattr *ia) -+{ -+ int err = 0; -+ -+ check_mini_fo_dentry(dentry); -+ -+ if(!is_mini_fo_existant(dentry)) { -+ printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [1].\n"); -+ goto out; -+ } -+ -+ if(dtost(dentry) == UNMODIFIED) { -+ if(!IS_COPY_FLAG(ia->ia_valid)) -+ goto out; /* we ignore these changes to base */ -+ -+ if(S_ISDIR(dentry->d_inode->i_mode)) { -+ err = dir_unmod_to_mod(dentry); -+ } else { -+ /* we copy contents if file is not beeing truncated */ -+ if(S_ISREG(dentry->d_inode->i_mode) && -+ !(ia->ia_size == 0 && (ia->ia_valid & ATTR_SIZE))) { -+ err = nondir_unmod_to_mod(dentry, 1); -+ } else -+ err = nondir_unmod_to_mod(dentry, 0); -+ } -+ if(err) { -+ err = -EINVAL; -+ printk(KERN_CRIT "mini_fo_setattr: ERROR changing states.\n"); -+ goto out; -+ } -+ } -+ if(!exists_in_storage(dentry)) { -+ printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [2].\n"); -+ err = -EINVAL; -+ goto out; -+ } -+ ASSERT(dentry->d_inode); -+ ASSERT(dtohd2(dentry)); -+ ASSERT(itopd(dentry->d_inode)); -+ ASSERT(itohi2(dentry->d_inode)); -+ -+ err = notify_change(dtohd2(dentry), ia); -+ fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode)); -+ out: -+ return err; -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+STATIC int -+mini_fo_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) -+{ -+ int err = 0; -+ dentry_t *hidden_dentry; -+ -+ ASSERT(dentry->d_inode); -+ ASSERT(itopd(dentry->d_inode)); -+ -+ if(itohi2(dentry->d_inode)) { -+ hidden_dentry = dtohd2(dentry); -+ } else if(itohi(dentry->d_inode)) { -+ hidden_dentry = dtohd(dentry); -+ } else { -+ printk(KERN_CRIT "mini_fo_getattr: ERROR, invalid state detected.\n"); -+ err = -ENOENT; -+ goto out; -+ } -+ fist_copy_attr_all(dentry->d_inode, hidden_dentry->d_inode); -+ -+ ASSERT(hidden_dentry); -+ ASSERT(hidden_dentry->d_inode); -+ ASSERT(hidden_dentry->d_inode->i_op); -+ -+ generic_fillattr(dentry->d_inode, stat); -+ if (!stat->blksize) { -+ struct super_block *s = hidden_dentry->d_inode->i_sb; -+ unsigned blocks; -+ blocks = (stat->size+s->s_blocksize-1) >> s->s_blocksize_bits; -+ stat->blocks = (s->s_blocksize / 512) * blocks; -+ stat->blksize = s->s_blocksize; -+ } -+ out: -+ return err; -+} -+#endif -+ -+#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) -+#if 0 /* no xattr_alloc() and xattr_free() */ -+/* This is lifted from fs/xattr.c */ -+static void * -+xattr_alloc(size_t size, size_t limit) -+{ -+ void *ptr; -+ -+ if (size > limit) -+ return ERR_PTR(-E2BIG); -+ -+ if (!size) /* size request, no buffer is needed */ -+ return NULL; -+ else if (size <= PAGE_SIZE) -+ ptr = kmalloc((unsigned long) size, GFP_KERNEL); -+ else -+ ptr = vmalloc((unsigned long) size); -+ if (!ptr) -+ return ERR_PTR(-ENOMEM); -+ return ptr; -+} -+ -+static void -+xattr_free(void *ptr, size_t size) -+{ -+ if (!size) /* size request, no buffer was needed */ -+ return; -+ else if (size <= PAGE_SIZE) -+ kfree(ptr); -+ else -+ vfree(ptr); -+} -+#endif /* no xattr_alloc() and xattr_free() */ -+ -+/* BKL held by caller. -+ * dentry->d_inode->i_sem down -+ */ -+STATIC int -+mini_fo_getxattr(struct dentry *dentry, const char *name, void *value, size_t size) { -+ struct dentry *hidden_dentry = NULL; -+ int err = -EOPNOTSUPP; -+ /* Define these anyway so we don't need as much ifdef'ed code. */ -+ char *encoded_name = NULL; -+ char *encoded_value = NULL; -+ -+ check_mini_fo_dentry(dentry); -+ -+ if(exists_in_storage(dentry)) -+ hidden_dentry = dtohd2(dentry); -+ else -+ hidden_dentry = dtohd(dentry); -+ -+ ASSERT(hidden_dentry); -+ ASSERT(hidden_dentry->d_inode); -+ ASSERT(hidden_dentry->d_inode->i_op); -+ -+ if (hidden_dentry->d_inode->i_op->getxattr) { -+ encoded_name = (char *)name; -+ encoded_value = (char *)value; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_dentry->d_inode->i_sem); -+#endif -+ /* lock_kernel() already done by caller. */ -+ err = hidden_dentry->d_inode->i_op->getxattr(hidden_dentry, encoded_name, encoded_value, size); -+ /* unlock_kernel() will be done by caller. */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_dentry->d_inode->i_sem); -+#endif -+ } -+ return err; -+} -+ -+/* BKL held by caller. -+ * dentry->d_inode->i_sem down -+ */ -+STATIC int -+#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,21) \ -+ && LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,23)) \ -+ || LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+mini_fo_setxattr(struct dentry *dentry, const char *name, -+ const void *value, size_t size, int flags) -+#else -+mini_fo_setxattr(struct dentry *dentry, const char *name, -+ void *value, size_t size, int flags) -+#endif -+ -+{ -+ struct dentry *hidden_dentry = NULL; -+ int err = -EOPNOTSUPP; -+ -+ /* Define these anyway, so we don't have as much ifdef'ed code. */ -+ char *encoded_value = NULL; -+ char *encoded_name = NULL; -+ -+ check_mini_fo_dentry(dentry); -+ -+ if(exists_in_storage(dentry)) -+ hidden_dentry = dtohd2(dentry); -+ else -+ hidden_dentry = dtohd(dentry); -+ -+ ASSERT(hidden_dentry); -+ ASSERT(hidden_dentry->d_inode); -+ ASSERT(hidden_dentry->d_inode->i_op); -+ -+ if (hidden_dentry->d_inode->i_op->setxattr) { -+ encoded_name = (char *)name; -+ encoded_value = (char *)value; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_dentry->d_inode->i_sem); -+#endif -+ /* lock_kernel() already done by caller. */ -+ err = hidden_dentry->d_inode->i_op->setxattr(hidden_dentry, encoded_name, encoded_value, size, flags); -+ /* unlock_kernel() will be done by caller. */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_dentry->d_inode->i_sem); -+#endif -+ } -+ return err; -+} -+ -+/* BKL held by caller. -+ * dentry->d_inode->i_sem down -+ */ -+STATIC int -+mini_fo_removexattr(struct dentry *dentry, const char *name) { -+ struct dentry *hidden_dentry = NULL; -+ int err = -EOPNOTSUPP; -+ char *encoded_name; -+ -+ check_mini_fo_dentry(dentry); -+ -+ if(exists_in_storage(dentry)) -+ hidden_dentry = dtohd2(dentry); -+ else -+ hidden_dentry = dtohd(dentry); -+ -+ ASSERT(hidden_dentry); -+ ASSERT(hidden_dentry->d_inode); -+ ASSERT(hidden_dentry->d_inode->i_op); -+ -+ if (hidden_dentry->d_inode->i_op->removexattr) { -+ encoded_name = (char *)name; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_dentry->d_inode->i_sem); -+#endif -+ /* lock_kernel() already done by caller. */ -+ err = hidden_dentry->d_inode->i_op->removexattr(hidden_dentry, encoded_name); -+ /* unlock_kernel() will be done by caller. */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_dentry->d_inode->i_sem); -+#endif -+ } -+ return err; -+} -+ -+/* BKL held by caller. -+ * dentry->d_inode->i_sem down -+ */ -+STATIC int -+mini_fo_listxattr(struct dentry *dentry, char *list, size_t size) { -+ struct dentry *hidden_dentry = NULL; -+ int err = -EOPNOTSUPP; -+ char *encoded_list = NULL; -+ -+ check_mini_fo_dentry(dentry); -+ -+ if(exists_in_storage(dentry)) -+ hidden_dentry = dtohd2(dentry); -+ else -+ hidden_dentry = dtohd(dentry); -+ -+ ASSERT(hidden_dentry); -+ ASSERT(hidden_dentry->d_inode); -+ ASSERT(hidden_dentry->d_inode->i_op); -+ -+ if (hidden_dentry->d_inode->i_op->listxattr) { -+ encoded_list = list; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_dentry->d_inode->i_sem); -+#endif -+ /* lock_kernel() already done by caller. */ -+ err = hidden_dentry->d_inode->i_op->listxattr(hidden_dentry, encoded_list, size); -+ /* unlock_kernel() will be done by caller. */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_dentry->d_inode->i_sem); -+#endif -+ } -+ return err; -+} -+# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */ -+ -+struct inode_operations mini_fo_symlink_iops = -+ { -+ readlink: mini_fo_readlink, -+ follow_link: mini_fo_follow_link, -+ /* mk: permission: mini_fo_permission, */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ revalidate: mini_fo_inode_revalidate, -+#endif -+ setattr: mini_fo_setattr, -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ getattr: mini_fo_getattr, -+ put_link: mini_fo_put_link, -+#endif -+ -+#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) -+ setxattr: mini_fo_setxattr, -+ getxattr: mini_fo_getxattr, -+ listxattr: mini_fo_listxattr, -+ removexattr: mini_fo_removexattr -+# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */ -+ }; -+ -+struct inode_operations mini_fo_dir_iops = -+ { -+ create: mini_fo_create, -+ lookup: mini_fo_lookup, -+ link: mini_fo_link, -+ unlink: mini_fo_unlink, -+ symlink: mini_fo_symlink, -+ mkdir: mini_fo_mkdir, -+ rmdir: mini_fo_rmdir, -+ mknod: mini_fo_mknod, -+ rename: mini_fo_rename, -+ /* no readlink/follow_link for non-symlinks */ -+ // off because we have setattr -+ // truncate: mini_fo_truncate, -+ /* mk:permission: mini_fo_permission, */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ revalidate: mini_fo_inode_revalidate, -+#endif -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ getattr: mini_fo_getattr, -+#endif -+ setattr: mini_fo_setattr, -+#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) -+ setxattr: mini_fo_setxattr, -+ getxattr: mini_fo_getxattr, -+ listxattr: mini_fo_listxattr, -+ removexattr: mini_fo_removexattr -+# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */ -+ }; -+ -+struct inode_operations mini_fo_main_iops = -+ { -+ /* permission: mini_fo_permission, */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ revalidate: mini_fo_inode_revalidate, -+#endif -+ setattr: mini_fo_setattr, -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ getattr: mini_fo_getattr, -+#endif -+#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) -+ setxattr: mini_fo_setxattr, -+ getxattr: mini_fo_getxattr, -+ listxattr: mini_fo_listxattr, -+ removexattr: mini_fo_removexattr -+# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */ -+ }; -diff -urN linux-2.6.19.old/fs/mini_fo/main.c linux-2.6.19.dev/fs/mini_fo/main.c ---- linux-2.6.19.old/fs/mini_fo/main.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/main.c 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,423 @@ -+/* -+ * Copyright (c) 1997-2003 Erez Zadok -+ * Copyright (c) 2001-2003 Stony Brook University -+ * -+ * For specific licensing information, see the COPYING file distributed with -+ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING. -+ * -+ * This Copyright notice must be kept intact and distributed with all -+ * fistgen sources INCLUDING sources generated by fistgen. -+ */ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+/* -+ * $Id$ -+ */ -+ -+#ifdef HAVE_CONFIG_H -+# include -+#endif -+ -+#include "fist.h" -+#include "mini_fo.h" -+#include -+ -+/* This definition must only appear after we include */ -+#ifndef MODULE_LICENSE -+# define MODULE_LICENSE(bison) -+#endif /* not MODULE_LICENSE */ -+ -+/* -+ * This is the mini_fo tri interpose function, which extends the -+ * functionality of the regular interpose by interposing a higher -+ * level inode on top of two lower level ones: the base filesystem -+ * inode and the storage filesystem inode. -+ * -+ * sb we pass is mini_fo's super_block -+ */ -+int -+mini_fo_tri_interpose(dentry_t *hidden_dentry, -+ dentry_t *hidden_sto_dentry, -+ dentry_t *dentry, super_block_t *sb, int flag) -+{ -+ inode_t *hidden_inode = NULL; -+ inode_t *hidden_sto_inode = NULL; /* store corresponding storage inode */ -+ int err = 0; -+ inode_t *inode; -+ -+ /* Pointer to hidden_sto_inode if exists, else to hidden_inode. -+ * This is used to copy the attributes of the correct inode. */ -+ inode_t *master_inode; -+ -+ if(hidden_dentry) -+ hidden_inode = hidden_dentry->d_inode; -+ if(hidden_sto_dentry) -+ hidden_sto_inode = hidden_sto_dentry->d_inode; -+ -+ ASSERT(dentry->d_inode == NULL); -+ -+ /* mk: One of the inodes associated with the dentrys is likely to -+ * be NULL, so carefull: -+ */ -+ ASSERT((hidden_inode != NULL) || (hidden_sto_inode != NULL)); -+ -+ if(hidden_sto_inode) -+ master_inode = hidden_sto_inode; -+ else -+ master_inode = hidden_inode; -+ -+ /* -+ * We allocate our new inode below, by calling iget. -+ * iget will call our read_inode which will initialize some -+ * of the new inode's fields -+ */ -+ -+ /* -+ * original: inode = iget(sb, hidden_inode->i_ino); -+ */ -+ inode = iget(sb, iunique(sb, 25)); -+ if (!inode) { -+ err = -EACCES; /* should be impossible??? */ -+ goto out; -+ } -+ -+ /* -+ * interpose the inode if not already interposed -+ * this is possible if the inode is being reused -+ * XXX: what happens if we get_empty_inode() but there's another already? -+ * for now, ASSERT() that this can't happen; fix later. -+ */ -+ if (itohi(inode) != NULL) { -+ printk(KERN_CRIT "mini_fo_tri_interpose: itohi(inode) != NULL.\n"); -+ } -+ if (itohi2(inode) != NULL) { -+ printk(KERN_CRIT "mini_fo_tri_interpose: itohi2(inode) != NULL.\n"); -+ } -+ -+ /* mk: Carefull, igrab can't handle NULL inodes (ok, why should it?), so -+ * we need to check here: -+ */ -+ if(hidden_inode) -+ itohi(inode) = igrab(hidden_inode); -+ else -+ itohi(inode) = NULL; -+ -+ if(hidden_sto_inode) -+ itohi2(inode) = igrab(hidden_sto_inode); -+ else -+ itohi2(inode) = NULL; -+ -+ -+ /* Use different set of inode ops for symlinks & directories*/ -+ if (S_ISLNK(master_inode->i_mode)) -+ inode->i_op = &mini_fo_symlink_iops; -+ else if (S_ISDIR(master_inode->i_mode)) -+ inode->i_op = &mini_fo_dir_iops; -+ -+ /* Use different set of file ops for directories */ -+ if (S_ISDIR(master_inode->i_mode)) -+ inode->i_fop = &mini_fo_dir_fops; -+ -+ /* properly initialize special inodes */ -+ if (S_ISBLK(master_inode->i_mode) || S_ISCHR(master_inode->i_mode) || -+ S_ISFIFO(master_inode->i_mode) || S_ISSOCK(master_inode->i_mode)) { -+ init_special_inode(inode, master_inode->i_mode, master_inode->i_rdev); -+ } -+ -+ /* Fix our inode's address operations to that of the lower inode */ -+ if (inode->i_mapping->a_ops != master_inode->i_mapping->a_ops) { -+ inode->i_mapping->a_ops = master_inode->i_mapping->a_ops; -+ } -+ -+ /* only (our) lookup wants to do a d_add */ -+ if (flag) -+ d_add(dentry, inode); -+ else -+ d_instantiate(dentry, inode); -+ -+ ASSERT(dtopd(dentry) != NULL); -+ -+ /* all well, copy inode attributes */ -+ fist_copy_attr_all(inode, master_inode); -+ -+ out: -+ return err; -+} -+ -+/* parse mount options "base=" and "sto=" */ -+dentry_t * -+mini_fo_parse_options(super_block_t *sb, char *options) -+{ -+ dentry_t *hidden_root = ERR_PTR(-EINVAL); -+ dentry_t *hidden_root2 = ERR_PTR(-EINVAL); -+ struct nameidata nd, nd2; -+ char *name, *tmp, *end; -+ int err = 0; -+ -+ /* We don't want to go off the end of our arguments later on. */ -+ for (end = options; *end; end++); -+ -+ while (options < end) { -+ tmp = options; -+ while (*tmp && *tmp != ',') -+ tmp++; -+ *tmp = '\0'; -+ if (!strncmp("base=", options, 5)) { -+ name = options + 5; -+ printk(KERN_INFO "mini_fo: using base directory: %s\n", name); -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ if (path_init(name, LOOKUP_FOLLOW, &nd)) -+ err = path_walk(name, &nd); -+#else -+ err = path_lookup(name, LOOKUP_FOLLOW, &nd); -+#endif -+ if (err) { -+ printk(KERN_CRIT "mini_fo: error accessing hidden directory '%s'\n", name); -+ hidden_root = ERR_PTR(err); -+ goto out; -+ } -+ hidden_root = nd.dentry; -+ stopd(sb)->base_dir_dentry = nd.dentry; -+ stopd(sb)->hidden_mnt = nd.mnt; -+ -+ } else if(!strncmp("sto=", options, 4)) { -+ /* parse the storage dir */ -+ name = options + 4; -+ printk(KERN_INFO "mini_fo: using storage directory: %s\n", name); -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ if(path_init(name, LOOKUP_FOLLOW, &nd2)) -+ err = path_walk(name, &nd2); -+#else -+ err = path_lookup(name, LOOKUP_FOLLOW, &nd2); -+#endif -+ if(err) { -+ printk(KERN_CRIT "mini_fo: error accessing hidden storage directory '%s'\n", name); -+ -+ hidden_root2 = ERR_PTR(err); -+ goto out; -+ } -+ hidden_root2 = nd2.dentry; -+ stopd(sb)->storage_dir_dentry = nd2.dentry; -+ stopd(sb)->hidden_mnt2 = nd2.mnt; -+ stohs2(sb) = hidden_root2->d_sb; -+ -+ /* validate storage dir, this is done in -+ * mini_fo_read_super for the base directory. -+ */ -+ if (IS_ERR(hidden_root2)) { -+ printk(KERN_WARNING "mini_fo_parse_options: storage dentry lookup failed (err = %ld)\n", PTR_ERR(hidden_root2)); -+ goto out; -+ } -+ if (!hidden_root2->d_inode) { -+ printk(KERN_WARNING "mini_fo_parse_options: no storage dir to interpose on.\n"); -+ goto out; -+ } -+ stohs2(sb) = hidden_root2->d_sb; -+ } else { -+ printk(KERN_WARNING "mini_fo: unrecognized option '%s'\n", options); -+ hidden_root = ERR_PTR(-EINVAL); -+ goto out; -+ } -+ options = tmp + 1; -+ } -+ -+ out: -+ if(IS_ERR(hidden_root2)) -+ return hidden_root2; -+ return hidden_root; -+} -+ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+static int -+#else -+super_block_t * -+#endif -+mini_fo_read_super(super_block_t *sb, void *raw_data, int silent) -+{ -+ dentry_t *hidden_root; -+ int err = 0; -+ -+ if (!raw_data) { -+ printk(KERN_WARNING "mini_fo_read_super: missing argument\n"); -+ err = -EINVAL; -+ goto out; -+ } -+ /* -+ * Allocate superblock private data -+ */ -+ __stopd(sb) = kmalloc(sizeof(struct mini_fo_sb_info), GFP_KERNEL); -+ if (!stopd(sb)) { -+ printk(KERN_WARNING "%s: out of memory\n", __FUNCTION__); -+ err = -ENOMEM; -+ goto out; -+ } -+ stohs(sb) = NULL; -+ -+ hidden_root = mini_fo_parse_options(sb, raw_data); -+ if (IS_ERR(hidden_root)) { -+ printk(KERN_WARNING "mini_fo_read_super: lookup_dentry failed (err = %ld)\n", PTR_ERR(hidden_root)); -+ err = PTR_ERR(hidden_root); -+ goto out_free; -+ } -+ if (!hidden_root->d_inode) { -+ printk(KERN_WARNING "mini_fo_read_super: no directory to interpose on\n"); -+ goto out_free; -+ } -+ stohs(sb) = hidden_root->d_sb; -+ -+ /* -+ * Linux 2.4.2-ac3 and beyond has code in -+ * mm/filemap.c:generic_file_write() that requires sb->s_maxbytes -+ * to be populated. If not set, all write()s under that sb will -+ * return 0. -+ * -+ * Linux 2.4.4+ automatically sets s_maxbytes to MAX_NON_LFS; -+ * the filesystem should override it only if it supports LFS. -+ */ -+ /* non-SCA code is good to go with LFS */ -+ sb->s_maxbytes = hidden_root->d_sb->s_maxbytes; -+ -+ sb->s_op = &mini_fo_sops; -+ /* -+ * we can't use d_alloc_root if we want to use -+ * our own interpose function unchanged, -+ * so we simply replicate *most* of the code in d_alloc_root here -+ */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ sb->s_root = d_alloc(NULL, &(const struct qstr) { "/", 1, 0 }); -+#else -+ sb->s_root = d_alloc(NULL, &(const struct qstr){hash: 0, name: "/", len : 1}); -+#endif -+ if (IS_ERR(sb->s_root)) { -+ printk(KERN_WARNING "mini_fo_read_super: d_alloc failed\n"); -+ err = -ENOMEM; -+ goto out_dput; -+ } -+ -+ sb->s_root->d_op = &mini_fo_dops; -+ sb->s_root->d_sb = sb; -+ sb->s_root->d_parent = sb->s_root; -+ -+ /* link the upper and lower dentries */ -+ __dtopd(sb->s_root) = (struct mini_fo_dentry_info *) -+ kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL); -+ if (!dtopd(sb->s_root)) { -+ err = -ENOMEM; -+ goto out_dput2; -+ } -+ dtopd(sb->s_root)->state = MODIFIED; -+ dtohd(sb->s_root) = hidden_root; -+ -+ /* fanout relevant, interpose on storage root dentry too */ -+ dtohd2(sb->s_root) = stopd(sb)->storage_dir_dentry; -+ -+ /* ...and call tri-interpose to interpose root dir inodes -+ * if (mini_fo_interpose(hidden_root, sb->s_root, sb, 0)) -+ */ -+ if(mini_fo_tri_interpose(hidden_root, dtohd2(sb->s_root), sb->s_root, sb, 0)) -+ goto out_dput2; -+ -+ /* initalize the wol list */ -+ itopd(sb->s_root->d_inode)->deleted_list_size = -1; -+ itopd(sb->s_root->d_inode)->renamed_list_size = -1; -+ meta_build_lists(sb->s_root); -+ -+ goto out; -+ -+ out_dput2: -+ dput(sb->s_root); -+ out_dput: -+ dput(hidden_root); -+ dput(dtohd2(sb->s_root)); /* release the hidden_sto_dentry too */ -+ out_free: -+ kfree(stopd(sb)); -+ __stopd(sb) = NULL; -+ out: -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ return err; -+#else -+ if (err) { -+ return ERR_PTR(err); -+ } else { -+ return sb; -+ } -+#endif -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+static int mini_fo_get_sb(struct file_system_type *fs_type, -+ int flags, const char *dev_name, -+ void *raw_data, struct vfsmount *mnt) -+{ -+ return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super, mnt); -+} -+#else -+static struct super_block *mini_fo_get_sb(struct file_system_type *fs_type, -+ int flags, const char *dev_name, -+ void *raw_data) -+{ -+ return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super); -+} -+#endif -+ -+void mini_fo_kill_block_super(struct super_block *sb) -+{ -+ generic_shutdown_super(sb); -+ /* -+ * XXX: BUG: Halcrow: Things get unstable sometime after this point: -+ * lib/rwsem-spinlock.c:127: spin_is_locked on uninitialized -+ * fs/fs-writeback.c:402: spin_lock(fs/super.c:a0381828) already -+ * locked by fs/fs-writeback.c/402 -+ * -+ * Apparently, someone's not releasing a lock on sb_lock... -+ */ -+} -+ -+static struct file_system_type mini_fo_fs_type = { -+ .owner = THIS_MODULE, -+ .name = "mini_fo", -+ .get_sb = mini_fo_get_sb, -+ .kill_sb = mini_fo_kill_block_super, -+ .fs_flags = 0, -+}; -+ -+ -+#else -+static DECLARE_FSTYPE(mini_fo_fs_type, "mini_fo", mini_fo_read_super, 0); -+#endif -+ -+static int __init init_mini_fo_fs(void) -+{ -+ printk("Registering mini_fo version $Id$\n"); -+ return register_filesystem(&mini_fo_fs_type); -+} -+static void __exit exit_mini_fo_fs(void) -+{ -+ printk("Unregistering mini_fo version $Id$\n"); -+ unregister_filesystem(&mini_fo_fs_type); -+} -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+EXPORT_NO_SYMBOLS; -+#endif -+ -+MODULE_AUTHOR("Erez Zadok "); -+MODULE_DESCRIPTION("FiST-generated mini_fo filesystem"); -+MODULE_LICENSE("GPL"); -+ -+/* MODULE_PARM(fist_debug_var, "i"); */ -+/* MODULE_PARM_DESC(fist_debug_var, "Debug level"); */ -+ -+module_init(init_mini_fo_fs) -+module_exit(exit_mini_fo_fs) -diff -urN linux-2.6.19.old/fs/mini_fo/Makefile linux-2.6.19.dev/fs/mini_fo/Makefile ---- linux-2.6.19.old/fs/mini_fo/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/Makefile 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,17 @@ -+# -+# Makefile for mini_fo 2.4 and 2.6 Linux kernels -+# -+# Copyright (C) 2004, 2005 Markus Klotzbuecher -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License -+# as published by the Free Software Foundation; either version -+# 2 of the License, or (at your option) any later version. -+# -+ -+obj-$(CONFIG_MINI_FO) := mini_fo.o -+mini_fo-objs := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o -+ -+# dependencies -+${mini_fo-objs}: mini_fo.h fist.h -+ -diff -urN linux-2.6.19.old/fs/mini_fo/meta.c linux-2.6.19.dev/fs/mini_fo/meta.c ---- linux-2.6.19.old/fs/mini_fo/meta.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/meta.c 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,1000 @@ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+#ifdef HAVE_CONFIG_H -+# include -+#endif /* HAVE_CONFIG_H */ -+#include "fist.h" -+#include "mini_fo.h" -+ -+int meta_build_lists(dentry_t *dentry) -+{ -+ struct mini_fo_inode_info *inode_info; -+ -+ dentry_t *meta_dentry = 0; -+ file_t *meta_file = 0; -+ mm_segment_t old_fs; -+ void *buf; -+ -+ int bytes, len; -+ struct vfsmount *meta_mnt; -+ char *entry; -+ -+ inode_info = itopd(dentry->d_inode); -+ if(!(inode_info->deleted_list_size == -1 && -+ inode_info->renamed_list_size == -1)) { -+ printk(KERN_CRIT "mini_fo: meta_build_lists: \ -+ Error, list(s) not virgin.\n"); -+ return -1; -+ } -+ -+ /* init our meta lists */ -+ INIT_LIST_HEAD(&inode_info->deleted_list); -+ inode_info->deleted_list_size = 0; -+ -+ INIT_LIST_HEAD(&inode_info->renamed_list); -+ inode_info->renamed_list_size = 0; -+ -+ /* might there be a META-file? */ -+ if(dtohd2(dentry) && dtohd2(dentry)->d_inode) { -+ meta_dentry = lookup_one_len(META_FILENAME, -+ dtohd2(dentry), -+ strlen(META_FILENAME)); -+ if(!meta_dentry->d_inode) { -+ dput(meta_dentry); -+ goto out_ok; -+ } -+ /* $%& err, is this correct? */ -+ meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2; -+ mntget(meta_mnt); -+ -+ -+ /* open META-file for reading */ -+ meta_file = dentry_open(meta_dentry, meta_mnt, 0x0); -+ if(!meta_file || IS_ERR(meta_file)) { -+ printk(KERN_CRIT "mini_fo: meta_build_lists: \ -+ ERROR opening META file.\n"); -+ goto out_err; -+ } -+ -+ /* check if fs supports reading */ -+ if(!meta_file->f_op->read) { -+ printk(KERN_CRIT "mini_fo: meta_build_lists: \ -+ ERROR, fs does not support reading.\n"); -+ goto out_err_close; -+ } -+ -+ /* allocate a page for transfering the data */ -+ buf = (void *) __get_free_page(GFP_KERNEL); -+ if(!buf) { -+ printk(KERN_CRIT "mini_fo: meta_build_lists: \ -+ ERROR, out of mem.\n"); -+ goto out_err_close; -+ } -+ meta_file->f_pos = 0; -+ old_fs = get_fs(); -+ set_fs(KERNEL_DS); -+ do { -+ char *c; -+ bytes = meta_file->f_op->read(meta_file, buf, PAGE_SIZE, &meta_file->f_pos); -+ if(bytes == PAGE_SIZE) { -+ /* trim a cut off filename and adjust f_pos to get it next time */ -+ for(c = (char*) buf+PAGE_SIZE; -+ *c != '\n'; -+ c--, bytes--, meta_file->f_pos--); -+ } -+ entry = (char *) buf; -+ while(entry < (char *) buf+bytes) { -+ -+ char *old_path; -+ char *dir_name; -+ int old_len, new_len; -+ -+ /* len without '\n'*/ -+ len = (int) (strchr(entry, '\n') - entry); -+ switch (*entry) { -+ case 'D': -+ /* format: "D filename" */ -+ meta_list_add_d_entry(dentry, -+ entry+2, -+ len-2); -+ break; -+ case 'R': -+ /* format: "R path/xy/dir newDir" */ -+ old_path = entry+2; -+ dir_name = strchr(old_path, ' ') + 1; -+ old_len = dir_name - old_path - 1; -+ new_len = ((int) entry) + len - ((int ) dir_name); -+ meta_list_add_r_entry(dentry, -+ old_path, -+ old_len, -+ dir_name, -+ new_len); -+ break; -+ default: -+ /* unknown entry type detected */ -+ break; -+ } -+ entry += len+1; -+ } -+ -+ } while(meta_file->f_pos < meta_dentry->d_inode->i_size); -+ -+ free_page((unsigned long) buf); -+ set_fs(old_fs); -+ fput(meta_file); -+ } -+ goto out_ok; -+ -+ out_err_close: -+ fput(meta_file); -+ out_err: -+ mntput(meta_mnt); -+ dput(meta_dentry); -+ return -1; -+ out_ok: -+ return 1; /* check this!!! inode_info->wol_size; */ -+} -+ -+/* cleanups up all lists and free's the mem by dentry */ -+int meta_put_lists(dentry_t *dentry) -+{ -+ if(!dentry || !dentry->d_inode) { -+ printk("mini_fo: meta_put_lists: invalid dentry passed.\n"); -+ return -1; -+ } -+ return __meta_put_lists(dentry->d_inode); -+} -+ -+/* cleanups up all lists and free's the mem by inode */ -+int __meta_put_lists(inode_t *inode) -+{ -+ int err = 0; -+ if(!inode || !itopd(inode)) { -+ printk("mini_fo: __meta_put_lists: invalid inode passed.\n"); -+ return -1; -+ } -+ err = __meta_put_d_list(inode); -+ err |= __meta_put_r_list(inode); -+ return err; -+} -+ -+int meta_sync_lists(dentry_t *dentry) -+{ -+ int err = 0; -+ if(!dentry || !dentry->d_inode) { -+ printk("mini_fo: meta_sync_lists: \ -+ invalid dentry passed.\n"); -+ return -1; -+ } -+ err = meta_sync_d_list(dentry, 0); -+ err |= meta_sync_r_list(dentry, 1); -+ return err; -+} -+ -+ -+/* remove all D entries from the renamed list and free the mem */ -+int __meta_put_d_list(inode_t *inode) -+{ -+ struct list_head *tmp; -+ struct deleted_entry *del_entry; -+ struct mini_fo_inode_info *inode_info; -+ -+ if(!inode || !itopd(inode)) { -+ printk(KERN_CRIT "mini_fo: __meta_put_d_list: \ -+ invalid inode passed.\n"); -+ return -1; -+ } -+ inode_info = itopd(inode); -+ -+ /* nuke the DELETED-list */ -+ if(inode_info->deleted_list_size <= 0) -+ return 0; -+ -+ while(!list_empty(&inode_info->deleted_list)) { -+ tmp = inode_info->deleted_list.next; -+ list_del(tmp); -+ del_entry = list_entry(tmp, struct deleted_entry, list); -+ kfree(del_entry->name); -+ kfree(del_entry); -+ } -+ inode_info->deleted_list_size = 0; -+ -+ return 0; -+} -+ -+/* remove all R entries from the renamed list and free the mem */ -+int __meta_put_r_list(inode_t *inode) -+{ -+ struct list_head *tmp; -+ struct renamed_entry *ren_entry; -+ struct mini_fo_inode_info *inode_info; -+ -+ if(!inode || !itopd(inode)) { -+ printk(KERN_CRIT "mini_fo: meta_put_r_list: invalid inode.\n"); -+ return -1; -+ } -+ inode_info = itopd(inode); -+ -+ /* nuke the RENAMED-list */ -+ if(inode_info->renamed_list_size <= 0) -+ return 0; -+ -+ while(!list_empty(&inode_info->renamed_list)) { -+ tmp = inode_info->renamed_list.next; -+ list_del(tmp); -+ ren_entry = list_entry(tmp, struct renamed_entry, list); -+ kfree(ren_entry->new_name); -+ kfree(ren_entry->old_name); -+ kfree(ren_entry); -+ } -+ inode_info->renamed_list_size = 0; -+ -+ return 0; -+} -+ -+int meta_add_d_entry(dentry_t *dentry, const char *name, int len) -+{ -+ int err = 0; -+ err = meta_list_add_d_entry(dentry, name, len); -+ err |= meta_write_d_entry(dentry,name,len); -+ return err; -+} -+ -+/* add a D entry to the deleted list */ -+int meta_list_add_d_entry(dentry_t *dentry, const char *name, int len) -+{ -+ struct deleted_entry *del_entry; -+ struct mini_fo_inode_info *inode_info; -+ -+ if(!dentry || !dentry->d_inode) { -+ printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \ -+ invalid dentry passed.\n"); -+ return -1; -+ } -+ inode_info = itopd(dentry->d_inode); -+ -+ if(inode_info->deleted_list_size < 0) -+ return -1; -+ -+ del_entry = (struct deleted_entry *) -+ kmalloc(sizeof(struct deleted_entry), GFP_KERNEL); -+ del_entry->name = (char*) kmalloc(len, GFP_KERNEL); -+ if(!del_entry || !del_entry->name) { -+ printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \ -+ out of mem.\n"); -+ kfree(del_entry->name); -+ kfree(del_entry); -+ return -ENOMEM; -+ } -+ -+ strncpy(del_entry->name, name, len); -+ del_entry->len = len; -+ -+ list_add(&del_entry->list, &inode_info->deleted_list); -+ inode_info->deleted_list_size++; -+ return 0; -+} -+ -+int meta_add_r_entry(dentry_t *dentry, -+ const char *old_name, int old_len, -+ const char *new_name, int new_len) -+{ -+ int err = 0; -+ err = meta_list_add_r_entry(dentry, -+ old_name, old_len, -+ new_name, new_len); -+ err |= meta_write_r_entry(dentry, -+ old_name, old_len, -+ new_name, new_len); -+ return err; -+} -+ -+/* add a R entry to the renamed list */ -+int meta_list_add_r_entry(dentry_t *dentry, -+ const char *old_name, int old_len, -+ const char *new_name, int new_len) -+{ -+ struct renamed_entry *ren_entry; -+ struct mini_fo_inode_info *inode_info; -+ -+ if(!dentry || !dentry->d_inode) { -+ printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \ -+ invalid dentry passed.\n"); -+ return -1; -+ } -+ inode_info = itopd(dentry->d_inode); -+ -+ if(inode_info->renamed_list_size < 0) -+ return -1; -+ -+ ren_entry = (struct renamed_entry *) -+ kmalloc(sizeof(struct renamed_entry), GFP_KERNEL); -+ ren_entry->old_name = (char*) kmalloc(old_len, GFP_KERNEL); -+ ren_entry->new_name = (char*) kmalloc(new_len, GFP_KERNEL); -+ -+ if(!ren_entry || !ren_entry->old_name || !ren_entry->new_name) { -+ printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \ -+ out of mem.\n"); -+ kfree(ren_entry->new_name); -+ kfree(ren_entry->old_name); -+ kfree(ren_entry); -+ return -ENOMEM; -+ } -+ -+ strncpy(ren_entry->old_name, old_name, old_len); -+ ren_entry->old_len = old_len; -+ strncpy(ren_entry->new_name, new_name, new_len); -+ ren_entry->new_len = new_len; -+ -+ list_add(&ren_entry->list, &inode_info->renamed_list); -+ inode_info->renamed_list_size++; -+ return 0; -+} -+ -+ -+int meta_remove_r_entry(dentry_t *dentry, const char *name, int len) -+{ -+ int err = 0; -+ if(!dentry || !dentry->d_inode) { -+ printk(KERN_CRIT -+ "mini_fo: meta_remove_r_entry: \ -+ invalid dentry passed.\n"); -+ return -1; -+ } -+ -+ err = meta_list_remove_r_entry(dentry, name, len); -+ err |= meta_sync_lists(dentry); -+ return err; -+} -+ -+int meta_list_remove_r_entry(dentry_t *dentry, const char *name, int len) -+{ -+ if(!dentry || !dentry->d_inode) { -+ printk(KERN_CRIT -+ "mini_fo: meta_list_remove_r_entry: \ -+ invalid dentry passed.\n"); -+ return -1; -+ } -+ return __meta_list_remove_r_entry(dentry->d_inode, name, len); -+} -+ -+int __meta_list_remove_r_entry(inode_t *inode, const char *name, int len) -+{ -+ struct list_head *tmp; -+ struct renamed_entry *ren_entry; -+ struct mini_fo_inode_info *inode_info; -+ -+ if(!inode || !itopd(inode)) -+ printk(KERN_CRIT -+ "mini_fo: __meta_list_remove_r_entry: \ -+ invalid inode passed.\n"); -+ inode_info = itopd(inode); -+ -+ if(inode_info->renamed_list_size < 0) -+ return -1; -+ if(inode_info->renamed_list_size == 0) -+ return 1; -+ -+ list_for_each(tmp, &inode_info->renamed_list) { -+ ren_entry = list_entry(tmp, struct renamed_entry, list); -+ if(ren_entry->new_len != len) -+ continue; -+ -+ if(!strncmp(ren_entry->new_name, name, len)) { -+ list_del(tmp); -+ kfree(ren_entry->new_name); -+ kfree(ren_entry->old_name); -+ kfree(ren_entry); -+ inode_info->renamed_list_size--; -+ return 0; -+ } -+ } -+ return 1; -+} -+ -+ -+/* append a single D entry to the meta file */ -+int meta_write_d_entry(dentry_t *dentry, const char *name, int len) -+{ -+ dentry_t *meta_dentry = 0; -+ file_t *meta_file = 0; -+ mm_segment_t old_fs; -+ -+ int bytes, err; -+ struct vfsmount *meta_mnt = 0; -+ char *buf; -+ -+ err = 0; -+ -+ if(itopd(dentry->d_inode)->deleted_list_size < 0) { -+ err = -1; -+ goto out; -+ } -+ -+ if(dtopd(dentry)->state == UNMODIFIED) { -+ err = build_sto_structure(dentry->d_parent, dentry); -+ if(err) { -+ printk(KERN_CRIT "mini_fo: meta_write_d_entry: \ -+ build_sto_structure failed.\n"); -+ goto out; -+ } -+ } -+ meta_dentry = lookup_one_len(META_FILENAME, -+ dtohd2(dentry), strlen (META_FILENAME)); -+ -+ /* We need to create a META-file */ -+ if(!meta_dentry->d_inode) { -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ vfs_create(dtohd2(dentry)->d_inode, -+ meta_dentry, -+ S_IRUSR | S_IWUSR, -+ NULL); -+#else -+ vfs_create(dtohd2(dentry)->d_inode, -+ meta_dentry, -+ S_IRUSR | S_IWUSR); -+#endif -+ } -+ /* open META-file for writing */ -+ meta_file = dentry_open(meta_dentry, meta_mnt, 0x1); -+ if(!meta_file || IS_ERR(meta_file)) { -+ printk(KERN_CRIT "mini_fo: meta_write_d_entry: \ -+ ERROR opening meta file.\n"); -+ mntput(meta_mnt); /* $%& is this necessary? */ -+ dput(meta_dentry); -+ err = -1; -+ goto out; -+ } -+ -+ /* check if fs supports writing */ -+ if(!meta_file->f_op->write) { -+ printk(KERN_CRIT "mini_fo: meta_write_d_entry: \ -+ ERROR, fs does not support writing.\n"); -+ goto out_err_close; -+ } -+ -+ meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */ -+ old_fs = get_fs(); -+ set_fs(KERNEL_DS); -+ -+ /* size: len for name, 1 for \n and 2 for "D " */ -+ buf = (char *) kmalloc(len+3, GFP_KERNEL); -+ if (!buf) { -+ printk(KERN_CRIT "mini_fo: meta_write_d_entry: \ -+ out of mem.\n"); -+ return -ENOMEM; -+ } -+ -+ buf[0] = 'D'; -+ buf[1] = ' '; -+ strncpy(buf+2, name, len); -+ buf[len+2] = '\n'; -+ bytes = meta_file->f_op->write(meta_file, buf, len+3, -+ &meta_file->f_pos); -+ if(bytes != len+3) { -+ printk(KERN_CRIT "mini_fo: meta_write_d_entry: \ -+ ERROR writing.\n"); -+ err = -1; -+ } -+ kfree(buf); -+ set_fs(old_fs); -+ -+ out_err_close: -+ fput(meta_file); -+ out: -+ return err; -+} -+ -+/* append a single R entry to the meta file */ -+int meta_write_r_entry(dentry_t *dentry, -+ const char *old_name, int old_len, -+ const char *new_name, int new_len) -+{ -+ dentry_t *meta_dentry = 0; -+ file_t *meta_file = 0; -+ mm_segment_t old_fs; -+ -+ int bytes, err, buf_len; -+ struct vfsmount *meta_mnt = 0; -+ char *buf; -+ -+ -+ err = 0; -+ -+ if(itopd(dentry->d_inode)->renamed_list_size < 0) { -+ err = -1; -+ goto out; -+ } -+ -+ /* build the storage structure? */ -+ if(dtopd(dentry)->state == UNMODIFIED) { -+ err = build_sto_structure(dentry->d_parent, dentry); -+ if(err) { -+ printk(KERN_CRIT "mini_fo: meta_write_r_entry: \ -+ build_sto_structure failed.\n"); -+ goto out; -+ } -+ } -+ meta_dentry = lookup_one_len(META_FILENAME, -+ dtohd2(dentry), -+ strlen (META_FILENAME)); -+ if(!meta_dentry->d_inode) { -+ /* We need to create a META-file */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ vfs_create(dtohd2(dentry)->d_inode, -+ meta_dentry, S_IRUSR | S_IWUSR, NULL); -+#else -+ vfs_create(dtohd2(dentry)->d_inode, -+ meta_dentry, S_IRUSR | S_IWUSR); -+#endif -+ } -+ /* open META-file for writing */ -+ meta_file = dentry_open(meta_dentry, meta_mnt, 0x1); -+ if(!meta_file || IS_ERR(meta_file)) { -+ printk(KERN_CRIT "mini_fo: meta_write_r_entry: \ -+ ERROR opening meta file.\n"); -+ mntput(meta_mnt); -+ dput(meta_dentry); -+ err = -1; -+ goto out; -+ } -+ -+ /* check if fs supports writing */ -+ if(!meta_file->f_op->write) { -+ printk(KERN_CRIT "mini_fo: meta_write_r_entry: \ -+ ERROR, fs does not support writing.\n"); -+ goto out_err_close; -+ } -+ -+ meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */ -+ old_fs = get_fs(); -+ set_fs(KERNEL_DS); -+ -+ /* size: 2 for "R ", old_len+new_len for names, 1 blank+1 \n */ -+ buf_len = old_len + new_len + 4; -+ buf = (char *) kmalloc(buf_len, GFP_KERNEL); -+ if (!buf) { -+ printk(KERN_CRIT "mini_fo: meta_write_r_entry: out of mem.\n"); -+ return -ENOMEM; -+ } -+ -+ buf[0] = 'R'; -+ buf[1] = ' '; -+ strncpy(buf + 2, old_name, old_len); -+ buf[old_len + 2] = ' '; -+ strncpy(buf + old_len + 3, new_name, new_len); -+ buf[buf_len -1] = '\n'; -+ bytes = meta_file->f_op->write(meta_file, buf, buf_len, &meta_file->f_pos); -+ if(bytes != buf_len) { -+ printk(KERN_CRIT "mini_fo: meta_write_r_entry: ERROR writing.\n"); -+ err = -1; -+ } -+ -+ kfree(buf); -+ set_fs(old_fs); -+ -+ out_err_close: -+ fput(meta_file); -+ out: -+ return err; -+} -+ -+/* sync D list to disk, append data if app_flag is 1 */ -+/* check the meta_mnt, which seems not to be used (properly) */ -+ -+int meta_sync_d_list(dentry_t *dentry, int app_flag) -+{ -+ dentry_t *meta_dentry; -+ file_t *meta_file; -+ mm_segment_t old_fs; -+ -+ int bytes, err; -+ struct vfsmount *meta_mnt; -+ char *buf; -+ -+ struct list_head *tmp; -+ struct deleted_entry *del_entry; -+ struct mini_fo_inode_info *inode_info; -+ -+ err = 0; -+ meta_file=0; -+ meta_mnt=0; -+ -+ if(!dentry || !dentry->d_inode) { -+ printk(KERN_CRIT "mini_fo: meta_sync_d_list: \ -+ invalid inode passed.\n"); -+ err = -1; -+ goto out; -+ } -+ inode_info = itopd(dentry->d_inode); -+ -+ if(inode_info->deleted_list_size < 0) { -+ err = -1; -+ goto out; -+ } -+ -+ /* ok, there is something to sync */ -+ -+ /* build the storage structure? */ -+ if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) { -+ err = build_sto_structure(dentry->d_parent, dentry); -+ if(err) { -+ printk(KERN_CRIT "mini_fo: meta_sync_d_list: \ -+ build_sto_structure failed.\n"); -+ goto out; -+ } -+ } -+ meta_dentry = lookup_one_len(META_FILENAME, -+ dtohd2(dentry), -+ strlen(META_FILENAME)); -+ if(!meta_dentry->d_inode) { -+ /* We need to create a META-file */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ vfs_create(dtohd2(dentry)->d_inode, -+ meta_dentry, S_IRUSR | S_IWUSR, NULL); -+#else -+ vfs_create(dtohd2(dentry)->d_inode, -+ meta_dentry, S_IRUSR | S_IWUSR); -+#endif -+ app_flag = 0; -+ } -+ /* need we truncate the meta file? */ -+ if(!app_flag) { -+ struct iattr newattrs; -+ newattrs.ia_size = 0; -+ newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&meta_dentry->d_inode->i_mutex); -+#else -+ down(&meta_dentry->d_inode->i_sem); -+#endif -+ err = notify_change(meta_dentry, &newattrs); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&meta_dentry->d_inode->i_mutex); -+#else -+ up(&meta_dentry->d_inode->i_sem); -+#endif -+ -+ if(err || meta_dentry->d_inode->i_size != 0) { -+ printk(KERN_CRIT "mini_fo: meta_sync_d_list: \ -+ ERROR truncating meta file.\n"); -+ goto out_err_close; -+ } -+ } -+ -+ /* open META-file for writing */ -+ meta_file = dentry_open(meta_dentry, meta_mnt, 0x1); -+ if(!meta_file || IS_ERR(meta_file)) { -+ printk(KERN_CRIT "mini_fo: meta_sync_d_list: \ -+ ERROR opening meta file.\n"); -+ /* we don't mntget so we dont't mntput (for now) -+ * mntput(meta_mnt); -+ */ -+ dput(meta_dentry); -+ err = -1; -+ goto out; -+ } -+ -+ /* check if fs supports writing */ -+ if(!meta_file->f_op->write) { -+ printk(KERN_CRIT "mini_fo: meta_sync_d_list: \ -+ ERROR, fs does not support writing.\n"); -+ goto out_err_close; -+ } -+ -+ meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */ -+ old_fs = get_fs(); -+ set_fs(KERNEL_DS); -+ -+ /* here we go... */ -+ list_for_each(tmp, &inode_info->deleted_list) { -+ del_entry = list_entry(tmp, struct deleted_entry, list); -+ -+ /* size: len for name, 1 for \n and 2 for "D " */ -+ buf = (char *) kmalloc(del_entry->len+3, GFP_KERNEL); -+ if (!buf) { -+ printk(KERN_CRIT "mini_fo: meta_sync_d_list: \ -+ out of mem.\n"); -+ return -ENOMEM; -+ } -+ -+ buf[0] = 'D'; -+ buf[1] = ' '; -+ strncpy(buf+2, del_entry->name, del_entry->len); -+ buf[del_entry->len+2] = '\n'; -+ bytes = meta_file->f_op->write(meta_file, buf, -+ del_entry->len+3, -+ &meta_file->f_pos); -+ if(bytes != del_entry->len+3) { -+ printk(KERN_CRIT "mini_fo: meta_sync_d_list: \ -+ ERROR writing.\n"); -+ err |= -1; -+ } -+ kfree(buf); -+ } -+ set_fs(old_fs); -+ -+ out_err_close: -+ fput(meta_file); -+ out: -+ return err; -+ -+} -+ -+int meta_sync_r_list(dentry_t *dentry, int app_flag) -+{ -+ dentry_t *meta_dentry; -+ file_t *meta_file; -+ mm_segment_t old_fs; -+ -+ int bytes, err, buf_len; -+ struct vfsmount *meta_mnt; -+ char *buf; -+ -+ struct list_head *tmp; -+ struct renamed_entry *ren_entry; -+ struct mini_fo_inode_info *inode_info; -+ -+ err = 0; -+ meta_file=0; -+ meta_mnt=0; -+ -+ if(!dentry || !dentry->d_inode) { -+ printk(KERN_CRIT "mini_fo: meta_sync_r_list: \ -+ invalid dentry passed.\n"); -+ err = -1; -+ goto out; -+ } -+ inode_info = itopd(dentry->d_inode); -+ -+ if(inode_info->deleted_list_size < 0) { -+ err = -1; -+ goto out; -+ } -+ -+ /* ok, there is something to sync */ -+ -+ /* build the storage structure? */ -+ if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) { -+ err = build_sto_structure(dentry->d_parent, dentry); -+ if(err) { -+ printk(KERN_CRIT "mini_fo: meta_sync_r_list: \ -+ build_sto_structure failed.\n"); -+ goto out; -+ } -+ } -+ meta_dentry = lookup_one_len(META_FILENAME, -+ dtohd2(dentry), -+ strlen(META_FILENAME)); -+ if(!meta_dentry->d_inode) { -+ /* We need to create a META-file */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ vfs_create(dtohd2(dentry)->d_inode, -+ meta_dentry, S_IRUSR | S_IWUSR, NULL); -+#else -+ vfs_create(dtohd2(dentry)->d_inode, -+ meta_dentry, S_IRUSR | S_IWUSR); -+#endif -+ app_flag = 0; -+ } -+ /* need we truncate the meta file? */ -+ if(!app_flag) { -+ struct iattr newattrs; -+ newattrs.ia_size = 0; -+ newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&meta_dentry->d_inode->i_mutex); -+#else -+ down(&meta_dentry->d_inode->i_sem); -+#endif -+ err = notify_change(meta_dentry, &newattrs); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&meta_dentry->d_inode->i_mutex); -+#else -+ up(&meta_dentry->d_inode->i_sem); -+#endif -+ if(err || meta_dentry->d_inode->i_size != 0) { -+ printk(KERN_CRIT "mini_fo: meta_sync_r_list: \ -+ ERROR truncating meta file.\n"); -+ goto out_err_close; -+ } -+ } -+ -+ /* open META-file for writing */ -+ meta_file = dentry_open(meta_dentry, meta_mnt, 0x1); -+ if(!meta_file || IS_ERR(meta_file)) { -+ printk(KERN_CRIT "mini_fo: meta_sync_r_list: \ -+ ERROR opening meta file.\n"); -+ /* we don't mntget so we dont't mntput (for now) -+ * mntput(meta_mnt); -+ */ -+ dput(meta_dentry); -+ err = -1; -+ goto out; -+ } -+ -+ /* check if fs supports writing */ -+ if(!meta_file->f_op->write) { -+ printk(KERN_CRIT "mini_fo: meta_sync_r_list: \ -+ ERROR, fs does not support writing.\n"); -+ goto out_err_close; -+ } -+ -+ meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */ -+ old_fs = get_fs(); -+ set_fs(KERNEL_DS); -+ -+ /* here we go... */ -+ list_for_each(tmp, &inode_info->renamed_list) { -+ ren_entry = list_entry(tmp, struct renamed_entry, list); -+ /* size: -+ * 2 for "R ", old_len+new_len for names, 1 blank+1 \n */ -+ buf_len = ren_entry->old_len + ren_entry->new_len + 4; -+ buf = (char *) kmalloc(buf_len, GFP_KERNEL); -+ if (!buf) { -+ printk(KERN_CRIT "mini_fo: meta_sync_r_list: \ -+ out of mem.\n"); -+ return -ENOMEM; -+ } -+ buf[0] = 'R'; -+ buf[1] = ' '; -+ strncpy(buf + 2, ren_entry->old_name, ren_entry->old_len); -+ buf[ren_entry->old_len + 2] = ' '; -+ strncpy(buf + ren_entry->old_len + 3, -+ ren_entry->new_name, ren_entry->new_len); -+ buf[buf_len - 1] = '\n'; -+ bytes = meta_file->f_op->write(meta_file, buf, -+ buf_len, &meta_file->f_pos); -+ if(bytes != buf_len) { -+ printk(KERN_CRIT "mini_fo: meta_sync_r_list: \ -+ ERROR writing.\n"); -+ err |= -1; -+ } -+ kfree(buf); -+ } -+ set_fs(old_fs); -+ -+ out_err_close: -+ fput(meta_file); -+ out: -+ return err; -+} -+ -+int meta_check_d_entry(dentry_t *dentry, const char *name, int len) -+{ -+ if(!dentry || !dentry->d_inode) -+ printk(KERN_CRIT "mini_fo: meta_check_d_dentry: \ -+ invalid dentry passed.\n"); -+ return __meta_check_d_entry(dentry->d_inode, name, len); -+} -+ -+int __meta_check_d_entry(inode_t *inode, const char *name, int len) -+{ -+ struct list_head *tmp; -+ struct deleted_entry *del_entry; -+ struct mini_fo_inode_info *inode_info; -+ -+ if(!inode || !itopd(inode)) -+ printk(KERN_CRIT "mini_fo: __meta_check_d_dentry: \ -+ invalid inode passed.\n"); -+ -+ inode_info = itopd(inode); -+ -+ if(inode_info->deleted_list_size <= 0) -+ return 0; -+ -+ list_for_each(tmp, &inode_info->deleted_list) { -+ del_entry = list_entry(tmp, struct deleted_entry, list); -+ if(del_entry->len != len) -+ continue; -+ -+ if(!strncmp(del_entry->name, name, len)) -+ return 1; -+ } -+ return 0; -+} -+ -+/* -+ * check if file has been renamed and return path to orig. base dir. -+ * Implements no error return values so far, what of course sucks. -+ * String is null terminated.' -+ */ -+char* meta_check_r_entry(dentry_t *dentry, const char *name, int len) -+{ -+ if(!dentry || !dentry->d_inode) { -+ printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \ -+ invalid dentry passed.\n"); -+ return NULL; -+ } -+ return __meta_check_r_entry(dentry->d_inode, name, len); -+} -+ -+char* __meta_check_r_entry(inode_t *inode, const char *name, int len) -+{ -+ struct list_head *tmp; -+ struct renamed_entry *ren_entry; -+ struct mini_fo_inode_info *inode_info; -+ char *old_path; -+ -+ if(!inode || !itopd(inode)) { -+ printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \ -+ invalid inode passed.\n"); -+ return NULL; -+ } -+ inode_info = itopd(inode); -+ -+ if(inode_info->renamed_list_size <= 0) -+ return NULL; -+ -+ list_for_each(tmp, &inode_info->renamed_list) { -+ ren_entry = list_entry(tmp, struct renamed_entry, list); -+ if(ren_entry->new_len != len) -+ continue; -+ -+ if(!strncmp(ren_entry->new_name, name, len)) { -+ old_path = (char *) -+ kmalloc(ren_entry->old_len+1, GFP_KERNEL); -+ strncpy(old_path, -+ ren_entry->old_name, -+ ren_entry->old_len); -+ old_path[ren_entry->old_len]='\0'; -+ return old_path; -+ } -+ } -+ return NULL; -+} -+ -+/* -+ * This version only checks if entry exists and return: -+ * 1 if exists, -+ * 0 if not, -+ * -1 if error. -+ */ -+int meta_is_r_entry(dentry_t *dentry, const char *name, int len) -+{ -+ if(!dentry || !dentry->d_inode) { -+ printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \ -+ invalid dentry passed.\n"); -+ return -1; -+ } -+ return __meta_is_r_entry(dentry->d_inode, name, len); -+} -+ -+int __meta_is_r_entry(inode_t *inode, const char *name, int len) -+{ -+ struct list_head *tmp; -+ struct renamed_entry *ren_entry; -+ struct mini_fo_inode_info *inode_info; -+ -+ if(!inode || !itopd(inode)) { -+ printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \ -+ invalid inode passed.\n"); -+ return -1; -+ } -+ inode_info = itopd(inode); -+ -+ if(inode_info->renamed_list_size <= 0) -+ return -1; -+ -+ list_for_each(tmp, &inode_info->renamed_list) { -+ ren_entry = list_entry(tmp, struct renamed_entry, list); -+ if(ren_entry->new_len != len) -+ continue; -+ -+ if(!strncmp(ren_entry->new_name, name, len)) -+ return 1; -+ } -+ return 0; -+} -+ -diff -urN linux-2.6.19.old/fs/mini_fo/mini_fo.h linux-2.6.19.dev/fs/mini_fo/mini_fo.h ---- linux-2.6.19.old/fs/mini_fo/mini_fo.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/mini_fo.h 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,510 @@ -+/* -+ * Copyright (c) 1997-2003 Erez Zadok -+ * Copyright (c) 2001-2003 Stony Brook University -+ * -+ * For specific licensing information, see the COPYING file distributed with -+ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING. -+ * -+ * This Copyright notice must be kept intact and distributed with all -+ * fistgen sources INCLUDING sources generated by fistgen. -+ */ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+/* -+ * $Id$ -+ */ -+ -+#ifndef __MINI_FO_H_ -+#define __MINI_FO_H_ -+ -+#ifdef __KERNEL__ -+ -+/* META stuff */ -+#define META_FILENAME "META_dAfFgHE39ktF3HD2sr" -+ -+/* use xattrs? */ -+#define XATTR -+ -+/* File attributes that when changed, result in a file beeing copied to storage */ -+#define COPY_FLAGS ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE -+ -+/* -+ * mini_fo filestates -+ */ -+#define MODIFIED 1 -+#define UNMODIFIED 2 -+#define CREATED 3 -+#define DEL_REWRITTEN 4 -+#define DELETED 5 -+#define NON_EXISTANT 6 -+ -+/* fist file systems superblock magic */ -+# define MINI_FO_SUPER_MAGIC 0xf15f -+ -+/* -+ * STRUCTURES: -+ */ -+ -+/* mini_fo inode data in memory */ -+struct mini_fo_inode_info { -+ inode_t *wii_inode; -+ inode_t *wii_inode2; /* pointer to storage inode */ -+ -+ /* META-data lists */ -+ /* deleted list, ex wol */ -+ struct list_head deleted_list; -+ int deleted_list_size; -+ -+ /* renamed list */ -+ struct list_head renamed_list; -+ int renamed_list_size; -+ -+ /* add other lists here ... */ -+}; -+ -+/* mini_fo dentry data in memory */ -+struct mini_fo_dentry_info { -+ dentry_t *wdi_dentry; -+ dentry_t *wdi_dentry2; /* pointer to storage dentry */ -+ unsigned int state; /* state of the mini_fo dentry */ -+}; -+ -+ -+/* mini_fo super-block data in memory */ -+struct mini_fo_sb_info { -+ super_block_t *wsi_sb, *wsi_sb2; /* mk: might point to the same sb */ -+ struct vfsmount *hidden_mnt, *hidden_mnt2; -+ dentry_t *base_dir_dentry; -+ dentry_t *storage_dir_dentry; -+ ; -+}; -+ -+/* readdir_data, readdir helper struct */ -+struct readdir_data { -+ struct list_head ndl_list; /* linked list head ptr */ -+ int ndl_size; /* list size */ -+ int sto_done; /* flag to show that the storage dir entries have -+ * all been read an now follow base entries */ -+}; -+ -+/* file private data. */ -+struct mini_fo_file_info { -+ struct file *wfi_file; -+ struct file *wfi_file2; /* pointer to storage file */ -+ struct readdir_data rd; -+}; -+ -+/* struct ndl_entry */ -+struct ndl_entry { -+ struct list_head list; -+ char *name; -+ int len; -+}; -+ -+/******************************** -+ * META-data structures -+ ********************************/ -+ -+/* deleted entry */ -+struct deleted_entry { -+ struct list_head list; -+ char *name; -+ int len; -+}; -+ -+/* renamed entry */ -+struct renamed_entry { -+ struct list_head list; -+ char *old_name; /* old directory with full path */ -+ int old_len; /* length of above string */ -+ char *new_name; /* new directory name */ -+ int new_len; /* length of above string */ -+}; -+ -+/* attr_change entry */ -+struct attr_change_entry { -+ struct list_head list; -+ char *name; -+ int len; -+}; -+ -+/* link entry */ -+struct link_entry { -+ struct list_head list; -+ int links_moved; -+ int inum_base; -+ int inum_sto; -+ char *weird_name; -+ int weird_name_len; -+}; -+ -+ -+/* Some other stuff required for mini_fo_filldir64, copied from -+ * fs/readdir.c -+ */ -+ -+#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1)) -+#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de))) -+ -+ -+struct linux_dirent64 { -+ u64 d_ino; -+ s64 d_off; -+ unsigned short d_reclen; -+ unsigned char d_type; -+ char d_name[0]; -+}; -+ -+ -+struct getdents_callback64 { -+ struct linux_dirent64 * current_dir; -+ struct linux_dirent64 * previous; -+ int count; -+ int error; -+}; -+ -+struct linux_dirent { -+ unsigned long d_ino; -+ unsigned long d_off; -+ unsigned short d_reclen; -+ char d_name[1]; -+}; -+ -+struct getdents_callback { -+ struct linux_dirent * current_dir; -+ struct linux_dirent * previous; -+ int count; -+ int error; -+}; -+ -+ -+/* -+ * MACROS: -+ */ -+ -+/* file TO private_data */ -+# define ftopd(file) ((struct mini_fo_file_info *)((file)->private_data)) -+# define __ftopd(file) ((file)->private_data) -+/* file TO hidden_file */ -+# define ftohf(file) ((ftopd(file))->wfi_file) -+# define ftohf2(file) ((ftopd(file))->wfi_file2) -+ -+/* inode TO private_data */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->i_private) -+# define __itopd(ino) ((ino)->i_private) -+#else -+# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->u.generic_ip) -+# define __itopd(ino) ((ino)->u.generic_ip) -+#endif -+/* inode TO hidden_inode */ -+# define itohi(ino) (itopd(ino)->wii_inode) -+# define itohi2(ino) (itopd(ino)->wii_inode2) -+ -+/* superblock TO private_data */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+# define stopd(super) ((struct mini_fo_sb_info *)(super)->s_fs_info) -+# define __stopd(super) ((super)->s_fs_info) -+#else -+# define stopd(super) ((struct mini_fo_sb_info *)(super)->u.generic_sbp) -+# define __stopd(super) ((super)->u.generic_sbp) -+#endif -+ -+/* unused? # define vfs2priv stopd */ -+/* superblock TO hidden_superblock */ -+ -+# define stohs(super) (stopd(super)->wsi_sb) -+# define stohs2(super) (stopd(super)->wsi_sb2) -+ -+/* dentry TO private_data */ -+# define dtopd(dentry) ((struct mini_fo_dentry_info *)(dentry)->d_fsdata) -+# define __dtopd(dentry) ((dentry)->d_fsdata) -+/* dentry TO hidden_dentry */ -+# define dtohd(dent) (dtopd(dent)->wdi_dentry) -+# define dtohd2(dent) (dtopd(dent)->wdi_dentry2) -+ -+/* dentry to state */ -+# define dtost(dent) (dtopd(dent)->state) -+# define sbt(sb) ((sb)->s_type->name) -+ -+#define IS_WRITE_FLAG(flag) (flag & (O_RDWR | O_WRONLY | O_APPEND)) -+#define IS_COPY_FLAG(flag) (flag & (COPY_FLAGS)) -+ -+/* macros to simplify non-SCA code */ -+# define MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages) -+# define MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages) -+# define FREE_PAGE_POINTERS(hidden_pages, num) -+# define FREE_PAGEDATA_POINTERS(hidden_pages_data, num) -+# define FOR_EACH_PAGE -+# define CURRENT_HIDDEN_PAGE hidden_page -+# define CURRENT_HIDDEN_PAGEDATA hidden_page_data -+# define CURRENT_HIDDEN_PAGEINDEX page->index -+ -+/* -+ * EXTERNALS: -+ */ -+extern struct file_operations mini_fo_main_fops; -+extern struct file_operations mini_fo_dir_fops; -+extern struct inode_operations mini_fo_main_iops; -+extern struct inode_operations mini_fo_dir_iops; -+extern struct inode_operations mini_fo_symlink_iops; -+extern struct super_operations mini_fo_sops; -+extern struct dentry_operations mini_fo_dops; -+extern struct vm_operations_struct mini_fo_shared_vmops; -+extern struct vm_operations_struct mini_fo_private_vmops; -+extern struct address_space_operations mini_fo_aops; -+ -+#if 0 /* unused by mini_fo */ -+extern int mini_fo_interpose(dentry_t *hidden_dentry, dentry_t *this_dentry, super_block_t *sb, int flag); -+#if defined(FIST_FILTER_DATA) || defined(FIST_FILTER_SCA) -+extern page_t *mini_fo_get1page(file_t *file, int index); -+extern int mini_fo_fill_zeros(file_t *file, page_t *page, unsigned from); -+# endif /* FIST_FILTER_DATA || FIST_FILTER_SCA */ -+ -+ -+# define mini_fo_hidden_dentry(d) __mini_fo_hidden_dentry(__FILE__,__FUNCTION__,__LINE__,(d)) -+# define mini_fo_hidden_sto_dentry(d) __mini_fo_hidden_sto_dentry(__FILE__,__FUNCTION__,__LINE__,(d)) -+ -+extern dentry_t *__mini_fo_hidden_dentry(char *file, char *func, int line, dentry_t *this_dentry); -+extern dentry_t *__mini_fo_hidden_sto_dentry(char *file, char *func, int line, dentry_t *this_dentry); -+ -+extern int mini_fo_read_file(const char *filename, void *buf, int len); -+extern int mini_fo_write_file(const char *filename, void *buf, int len); -+extern dentry_t *fist_lookup(dentry_t *dir, const char *name, vnode_t **out, uid_t uid, gid_t gid); -+#endif /* unused by mini_fo */ -+ -+/* state transition functions */ -+extern int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag); -+extern int nondir_del_rew_to_del(dentry_t *dentry); -+extern int nondir_creat_to_del(dentry_t *dentry); -+extern int nondir_mod_to_del(dentry_t *dentry); -+extern int nondir_unmod_to_del(dentry_t *dentry); -+ -+extern int dir_unmod_to_mod(dentry_t *dentry); -+ -+/* rename specials */ -+extern int rename_directory(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry); -+extern int rename_nondir(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry); -+ -+/* misc stuff */ -+extern int mini_fo_tri_interpose(dentry_t *hidden_dentry, -+ dentry_t *hidden_sto_dentry, -+ dentry_t *dentry, -+ super_block_t *sb, int flag); -+ -+extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt, -+ dentry_t *src_dentry, struct vfsmount *src_mnt); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd); -+ -+extern int create_sto_nod(dentry_t *dentry, int mode, dev_t dev); -+extern int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd); -+#else -+extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode); -+ -+extern int create_sto_nod(dentry_t *dentry, int mode, int dev); -+extern int create_sto_reg_file(dentry_t *dentry, int mode); -+#endif -+ -+extern int create_sto_dir(dentry_t *dentry, int mode); -+ -+extern int exists_in_storage(dentry_t *dentry); -+extern int is_mini_fo_existant(dentry_t *dentry); -+extern int get_neg_sto_dentry(dentry_t *dentry); -+extern int build_sto_structure(dentry_t *dir, dentry_t *dentry); -+extern int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len); -+extern dentry_t *bpath_walk(super_block_t *sb, char *bpath); -+extern int bpath_put(dentry_t *dentry); -+ -+/* check_mini_fo types functions */ -+extern int check_mini_fo_dentry(dentry_t *dentry); -+extern int check_mini_fo_file(file_t *file); -+extern int check_mini_fo_inode(inode_t *inode); -+ -+/* General meta functions, can be called from outside of meta.c */ -+extern int meta_build_lists(dentry_t *dentry); -+extern int meta_put_lists(dentry_t *dentry); -+extern int __meta_put_lists(inode_t *inode); -+ -+extern int meta_add_d_entry(dentry_t *dentry, const char *name, int len); -+extern int meta_add_r_entry(dentry_t *dentry, -+ const char *old_name, int old_len, -+ const char *new_name, int new_len); -+ -+extern int meta_remove_r_entry(dentry_t *dentry, const char *name, int len); -+ -+extern int meta_check_d_entry(dentry_t *dentry, const char *name, int len); -+extern int __meta_check_d_entry(inode_t *inode, const char *name, int len); -+ -+extern char* meta_check_r_entry(dentry_t *dentry, const char *name, int len); -+extern char* __meta_check_r_entry(inode_t *inode, const char *name, int len); -+extern int meta_is_r_entry(dentry_t *dentry, const char *name, int len); -+extern int __meta_is_r_entry(inode_t *inode, const char *name, int len); -+ -+/* Specific meta functions, should be called only inside meta.c */ -+extern int __meta_put_d_list(inode_t *inode); -+extern int __meta_put_r_list(inode_t *inode); -+ -+extern int meta_list_add_d_entry(dentry_t *dentry, -+ const char *name, int len); -+extern int meta_list_add_r_entry(dentry_t *dentry, -+ const char *old_name, int old_len, -+ const char *new_name, int new_len); -+ -+extern int meta_list_remove_r_entry(dentry_t *dentry, -+ const char *name, int len); -+ -+extern int __meta_list_remove_r_entry(inode_t *inode, -+ const char *name, int len); -+ -+extern int meta_write_d_entry(dentry_t *dentry, const char *name, int len); -+extern int meta_write_r_entry(dentry_t *dentry, -+ const char *old_name, int old_len, -+ const char *new_name, int new_len); -+ -+extern int meta_sync_lists(dentry_t *dentry); -+extern int meta_sync_d_list(dentry_t *dentry, int app_flag); -+extern int meta_sync_r_list(dentry_t *dentry, int app_flag); -+ -+/* ndl stuff */ -+extern int ndl_add_entry(struct readdir_data *rd, const char *name, int len); -+extern void ndl_put_list(struct readdir_data *rd); -+extern int ndl_check_entry(struct readdir_data *rd, -+ const char *name, int len); -+ -+ -+# define copy_inode_size(dst, src) \ -+ dst->i_size = src->i_size; \ -+ dst->i_blocks = src->i_blocks; -+ -+static inline void -+fist_copy_attr_atime(inode_t *dest, const inode_t *src) -+{ -+ ASSERT(dest != NULL); -+ ASSERT(src != NULL); -+ dest->i_atime = src->i_atime; -+} -+static inline void -+fist_copy_attr_times(inode_t *dest, const inode_t *src) -+{ -+ ASSERT(dest != NULL); -+ ASSERT(src != NULL); -+ dest->i_atime = src->i_atime; -+ dest->i_mtime = src->i_mtime; -+ dest->i_ctime = src->i_ctime; -+} -+static inline void -+fist_copy_attr_timesizes(inode_t *dest, const inode_t *src) -+{ -+ ASSERT(dest != NULL); -+ ASSERT(src != NULL); -+ dest->i_atime = src->i_atime; -+ dest->i_mtime = src->i_mtime; -+ dest->i_ctime = src->i_ctime; -+ copy_inode_size(dest, src); -+} -+static inline void -+fist_copy_attr_all(inode_t *dest, const inode_t *src) -+{ -+ ASSERT(dest != NULL); -+ ASSERT(src != NULL); -+ dest->i_mode = src->i_mode; -+ dest->i_nlink = src->i_nlink; -+ dest->i_uid = src->i_uid; -+ dest->i_gid = src->i_gid; -+ dest->i_rdev = src->i_rdev; -+ dest->i_atime = src->i_atime; -+ dest->i_mtime = src->i_mtime; -+ dest->i_ctime = src->i_ctime; -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) -+ dest->i_blksize = src->i_blksize; -+#endif -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,12) -+ dest->i_blkbits = src->i_blkbits; -+# endif /* linux 2.4.12 and newer */ -+ copy_inode_size(dest, src); -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ dest->i_attr_flags = src->i_attr_flags; -+#else -+ dest->i_flags = src->i_flags; -+#endif -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+/* copied from linux/fs.h */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+static inline void double_lock(struct dentry *d1, struct dentry *d2) -+{ -+ struct mutex *m1 = &d1->d_inode->i_mutex; -+ struct mutex *m2 = &d2->d_inode->i_mutex; -+ if (m1 != m2) { -+ if ((unsigned long) m1 < (unsigned long) m2) { -+ struct mutex *tmp = m2; -+ m2 = m1; m1 = tmp; -+ } -+ mutex_lock(m1); -+ } -+ mutex_lock(m2); -+} -+ -+static inline void double_unlock(struct dentry *d1, struct dentry *d2) -+{ -+ struct mutex *m1 = &d1->d_inode->i_mutex; -+ struct mutex *m2 = &d2->d_inode->i_mutex; -+ mutex_unlock(m1); -+ if (m1 != m2) -+ mutex_unlock(m2); -+ dput(d1); -+ dput(d2); -+} -+ -+#else -+static inline void double_down(struct semaphore *s1, struct semaphore *s2) -+{ -+ if (s1 != s2) { -+ if ((unsigned long) s1 < (unsigned long) s2) { -+ struct semaphore *tmp = s2; -+ s2 = s1; s1 = tmp; -+ } -+ down(s1); -+ } -+ down(s2); -+} -+ -+static inline void double_up(struct semaphore *s1, struct semaphore *s2) -+{ -+ up(s1); -+ if (s1 != s2) -+ up(s2); -+} -+ -+static inline void double_lock(struct dentry *d1, struct dentry *d2) -+{ -+ double_down(&d1->d_inode->i_sem, &d2->d_inode->i_sem); -+} -+ -+static inline void double_unlock(struct dentry *d1, struct dentry *d2) -+{ -+ double_up(&d1->d_inode->i_sem,&d2->d_inode->i_sem); -+ dput(d1); -+ dput(d2); -+} -+#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) */ -+#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */ -+#endif /* __KERNEL__ */ -+ -+/* -+ * Definitions for user and kernel code -+ */ -+ -+/* ioctls */ -+ -+#endif /* not __MINI_FO_H_ */ -diff -urN linux-2.6.19.old/fs/mini_fo/mini_fo-merge linux-2.6.19.dev/fs/mini_fo/mini_fo-merge ---- linux-2.6.19.old/fs/mini_fo/mini_fo-merge 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/mini_fo-merge 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,180 @@ -+#!/bin/bash -+# -+# Copyright (C) 2005 Markus Klotzbuecher -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License -+# as published by the Free Software Foundation; either version -+# 2 of the License, or (at your option) any later version. -+# -+ -+BASE= -+STO= -+HELP= -+DRYRUN= -+VERBOSE= -+TMP="/tmp/" -+META_NAME="META_dAfFgHE39ktF3HD2sr" -+SKIP_DEL_LIST="skip-delete-list.mini_fo-merge" -+ -+COMMAND= -+exec_command() -+{ -+ if [ x$DRYRUN == "xset" ]; then -+ echo " would run: $COMMAND" -+ elif ! [ x$DRYRUN == "xset" ]; then -+ if [ x$VERBOSE == "xset" ]; then -+ echo " running: $COMMAND" -+ fi -+ eval $COMMAND -+ fi -+} -+ -+usage() -+{ -+cat < -s -+Version 0.1 -+ -+This script merges the contents of a mini_fo storage file system back -+to the base file system. -+ -+!!! Warning: This will modify the base filesystem and can destroy data -+ if used wrongly. -+ -+Options: -+ -b -+ the directory of the base file system. -+ -+ -s -+ the directory of the storage file system. -+ -+ -d dry run, will not change anything and print the commands that -+ would be executed. -+ -+ -t tmp dir for storing temporary file. default: $TMP -+ -+ -v show what operations are performed. -+ -+ -h displays this message. -+ -+EOF -+} -+ -+# parse parameters -+while getopts hdvt:b:s: OPTS -+ do -+ case $OPTS in -+ h) HELP="set";; -+ d) DRYRUN="set";; -+ v) VERBOSE="set";; -+ b) BASE="$OPTARG";; -+ s) STO="$OPTARG";; -+ t) TMP="$OPTARG";; -+ ?) usage -+ exit 1;; -+ esac -+done -+ -+if [ "x$HELP" == "xset" ]; then -+ usage -+ exit -1 -+fi -+ -+if ! [ -d "$BASE" ] || ! [ -d "$STO" ]; then -+ echo -e "$0:\n Error, -s and/or -b argument missing. type $0 -h for help." -+ exit -1; -+fi -+ -+# get full paths -+pushd $STO; STO=`pwd`; popd -+pushd $BASE; BASE=`pwd`; popd -+TMP=${TMP%/} -+ -+ -+cat< /dev/null -+find . -name $META_NAME -type f -print0 | xargs -0 -e grep -e '^R ' | tr -s ':R' ' ' | while read ENTRY; do -+ echo "entry: $ENTRY" -+ META_FILE=`echo $ENTRY | cut -d ' ' -f 1` -+ OLD_B_DIR=`echo $ENTRY | cut -d ' ' -f 2 | sed -e 's/\///'` -+ NEW_NAME=`echo $ENTRY | cut -d ' ' -f 3` -+ NEW_B_DIR=`echo $META_FILE | sed -e "s/$META_NAME/$NEW_NAME/" | sed -e 's/^\.\///'` -+ echo "META_FILE: $META_FILE" -+ echo "OLD_B_DIR: $OLD_B_DIR" -+ echo "NEW_NAME: $NEW_NAME" -+ echo "NEW_B_DIR: $NEW_B_DIR" -+ -+ pushd $BASE &> /dev/null -+ # remove an existing dir in storage -+ COMMAND="rm -rf $NEW_B_DIR"; exec_command -+ COMMAND="cp -R $OLD_B_DIR $NEW_B_DIR"; exec_command -+ echo "" -+ popd &> /dev/null -+ -+ # remember this dir to exclude it from deleting later -+ echo $NEW_B_DIR >> $TMP/$SKIP_DEL_LIST -+done -+ -+# delete all whiteouted files from base -+echo -e "\nDeleting whiteout'ed files from base file system..." -+find . -name $META_NAME -type f -print0 | xargs -0 -e grep -e '^D ' | sed -e 's/:D//' | while read ENTRY; do -+ META_FILE=`echo $ENTRY | cut -d ' ' -f 1` -+ DEL_NAME=`echo $ENTRY | cut -d ' ' -f 2` -+ DEL_FILE=`echo $META_FILE | sed -e "s/$META_NAME/$DEL_NAME/" | sed -e 's/^\.\///'` -+ grep -x $DEL_FILE $TMP/$SKIP_DEL_LIST &> /dev/null -+ if [ $? -ne 0 ]; then -+ pushd $BASE &> /dev/null -+ COMMAND="rm -rf $DEL_FILE"; exec_command -+ popd &> /dev/null -+ else -+ echo " excluding: $DEL_FILE as in skip-del-list." -+ fi -+done -+ -+# create all dirs and update permissions -+echo -e "\nSetting up directory structures in base file system..." -+find . -type d | sed -e 's/^\.\///' | while read DIR; do -+ PERMS=`stat -c %a $DIR` -+ DIR_UID=`stat -c %u $DIR` -+ DIR_GID=`stat -c %g $DIR` -+ pushd $BASE &> /dev/null -+ if ! [ -d $DIR ]; then -+ COMMAND="mkdir -p $DIR"; exec_command -+ fi -+ COMMAND="chmod $PERMS $DIR"; exec_command -+ COMMAND="chown $DIR_UID:$DIR_GID $DIR"; exec_command -+ popd &> /dev/null -+done -+ -+# merge all non-directory files -+echo -e "\nMerging all non-directory files...." -+for i in b c p f l s; do -+ find . -type $i | sed -e 's/^\.\///' | grep -v "$META_NAME" | while read FILE; do -+ pushd $BASE #&> /dev/null -+ COMMAND="cp -df $STO/$FILE $BASE/$FILE"; exec_command -+ popd &> /dev/null -+ done -+done -+popd &> /dev/null -+ -+#rm $TMP/$SKIP_DEL_LIST -+ -+echo "Done!" -diff -urN linux-2.6.19.old/fs/mini_fo/mini_fo-overlay linux-2.6.19.dev/fs/mini_fo/mini_fo-overlay ---- linux-2.6.19.old/fs/mini_fo/mini_fo-overlay 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/mini_fo-overlay 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,130 @@ -+#!/bin/bash -+# -+# Copyright (C) 2005 Markus Klotzbuecher -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License -+# as published by the Free Software Foundation; either version -+# 2 of the License, or (at your option) any later version. -+# -+ -+HELP= -+SUFF= -+MNTP= -+MNT_DIR="/mnt" -+STO= -+STO_DIR="/tmp" -+BASE= -+ -+usage() -+{ -+cat <" in $STO_DIR, -+and mount point "mini_fo-" in $MNT_DIR. -+ -+Options: -+ -s -+ add given suffix to storage directory and the mount -+ point. This is usefull for overlaying one base directory -+ several times and avoiding conflicts with storage directory -+ names and mount points. -+ -+ -d -+ change the directory in which the storage directory will be -+ created (default is currently "$STO_DIR". -+ -+ -m -+ use an alternative directory to create the mini_fo -+ mountpoint (default is currently "$MNT_DIR". -+ -+ -h displays this message. -+ -+EOF -+exit 1; -+} -+ -+while getopts hm:s:d: OPTS -+ do -+ case $OPTS in -+ s) SUFF="$OPTARG";; -+ d) STO_DIR="$OPTARG";; -+ m) MNT_DIR="$OPTARG";; -+ h) HELP="set";; -+ ?) usage -+ exit 1;; -+ esac -+done -+shift $(($OPTIND - 1)) -+ -+BASE="$1" -+ -+if [ "x$HELP" == "xset" ]; then -+ usage -+ exit -1 -+fi -+ -+# fix suffix -+if [ "x$SUFF" != "x" ]; then -+ SUFF="-$SUFF" -+fi -+ -+# kill trailing slashes -+MNT_DIR=${MNT_DIR%/} -+STO_DIR=${STO_DIR%/} -+BASE=${BASE%/} -+ -+ -+if ! [ -d "$BASE" ]; then -+ echo "invalid base dir $BASE, run $0 -h for help." -+ exit -1 -+fi -+ -+# check opts -+if ! [ -d "$MNT_DIR" ]; then -+ echo "invalid mount dir $MNT_DIR, run $0 -h for help." -+ exit -1 -+fi -+ -+if ! [ -d "$STO_DIR" ]; then -+ echo "invalid sto_dir_dir $STO_DIR, run $0 -h for help." -+ exit -1 -+fi -+ -+MNTP="$MNT_DIR/mini_fo-`basename $BASE`$SUFF" -+STO="$STO_DIR/sto-`basename $BASE`$SUFF" -+ -+# create the mount point if it doesn't exist -+mkdir -p $MNTP -+if [ $? -ne 0 ]; then -+ echo "Error, failed to create mount point $MNTP" -+fi -+ -+mkdir -p $STO -+if [ $? -ne 0 ]; then -+ echo "Error, failed to create storage dir $STO" -+fi -+ -+# check if fs is already mounted -+mount | grep mini_fo | grep $MNTP &> /dev/null -+if [ $? -eq 0 ]; then -+ echo "Error, existing mini_fo mount at $MNTP." -+ exit -1 -+fi -+ -+mount | grep mini_fo | grep $STO &> /dev/null -+if [ $? -eq 0 ]; then -+ echo "Error, $STO seems to be used already." -+ exit -1 -+fi -+ -+# mount -+mount -t mini_fo -o base=$BASE,sto=$STO $BASE $MNTP -+ -+if [ $? -ne 0 ]; then -+ echo "Error, mounting failed, maybe no permisson to mount?" -+fi -diff -urN linux-2.6.19.old/fs/mini_fo/mmap.c linux-2.6.19.dev/fs/mini_fo/mmap.c ---- linux-2.6.19.old/fs/mini_fo/mmap.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/mmap.c 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,637 @@ -+/* -+ * Copyright (c) 1997-2003 Erez Zadok -+ * Copyright (c) 2001-2003 Stony Brook University -+ * -+ * For specific licensing information, see the COPYING file distributed with -+ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING. -+ * -+ * This Copyright notice must be kept intact and distributed with all -+ * fistgen sources INCLUDING sources generated by fistgen. -+ */ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+/* -+ * $Id$ -+ */ -+ -+#ifdef HAVE_CONFIG_H -+# include -+#endif /* HAVE_CONFIG_H */ -+ -+#include "fist.h" -+#include "mini_fo.h" -+ -+ -+#ifdef FIST_COUNT_WRITES -+/* for counting writes in the middle vs. regular writes */ -+unsigned long count_writes = 0, count_writes_middle = 0; -+#endif /* FIST_COUNT_WRITES */ -+ -+/* forward declaration of commit write and prepare write */ -+STATIC int mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to); -+STATIC int mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to); -+ -+ -+/* -+ * Function for handling creation of holes when lseek-ing past the -+ * end of the file and then writing some data. -+ */ -+int -+mini_fo_fill_zeros(file_t* file, page_t *page, unsigned from) -+{ -+ int err = 0; -+ dentry_t *dentry = file->f_dentry; -+ inode_t *inode = dentry->d_inode; -+ page_t *tmp_page; -+ int index; -+ -+ print_entry_location(); -+ -+ for (index = inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) { -+ tmp_page = mini_fo_get1page(file, index); -+ if (IS_ERR(tmp_page)) { -+ err = PTR_ERR(tmp_page); -+ goto out; -+ } -+ -+ /* -+ * zero out rest of the contents of the page between the appropriate -+ * offsets. -+ */ -+ memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK)); -+ -+ if (! (err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE))) -+ err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE); -+ -+ page_cache_release(tmp_page); -+ if (err < 0) -+ goto out; -+ if (current->need_resched) -+ schedule(); -+ } -+ -+ /* zero out appropriate parts of last page */ -+ -+ /* -+ * if the encoding type is block, then adjust the 'from' (where the -+ * zeroing will start) offset appropriately -+ */ -+ from = from & (~(FIST_ENCODING_BLOCKSIZE - 1)); -+ -+ if ((from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0) { -+ -+ memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, from - (inode->i_size & ~PAGE_CACHE_MASK)); -+ if (! (err = mini_fo_prepare_write(file, page, 0, PAGE_CACHE_SIZE))) -+ err = mini_fo_commit_write(file, page, 0, PAGE_CACHE_SIZE); -+ -+ if (err < 0) -+ goto out; -+ if (current->need_resched) -+ schedule(); -+ } -+ -+ out: -+ print_exit_status(err); -+ return err; -+} -+ -+ -+ -+STATIC int -+mini_fo_writepage(page_t *page) -+{ -+ int err = -EIO; -+ inode_t *inode; -+ inode_t *hidden_inode; -+ page_t *hidden_page; -+ char *kaddr, *hidden_kaddr; -+ -+ print_entry_location(); -+ -+ inode = page->mapping->host; -+ hidden_inode = itohi(inode); -+ -+ /* -+ * writepage is called when shared mmap'ed files need to write -+ * their pages, while prepare/commit_write are called from the -+ * non-paged write() interface. (However, in 2.3 the two interfaces -+ * share the same cache, while in 2.2 they didn't.) -+ * -+ * So we pretty much have to duplicate much of what commit_write does. -+ */ -+ -+ /* find lower page (returns a locked page) */ -+ hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index); -+ if (!hidden_page) -+ goto out; -+ -+ /* get page address, and encode it */ -+ kaddr = (char *) kmap(page); -+ hidden_kaddr = (char*) kmap(hidden_page); -+ mini_fo_encode_block(kaddr, hidden_kaddr, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index); -+ /* if encode_block could fail, then return error */ -+ kunmap(page); -+ kunmap(hidden_page); -+ -+ /* call lower writepage (expects locked page) */ -+ err = hidden_inode->i_mapping->a_ops->writepage(hidden_page); -+ -+ /* -+ * update mtime and ctime of lower level file system -+ * mini_fo' mtime and ctime are updated by generic_file_write -+ */ -+ hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME; -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,1) -+ UnlockPage(hidden_page); /* b/c grab_cache_page locked it */ -+# endif /* kernel older than 2.4.1 */ -+ page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */ -+ -+ if (err) -+ ClearPageUptodate(page); -+ else -+ SetPageUptodate(page); -+ out: -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1) -+ UnlockPage(page); -+# endif /* kernel 2.4.1 and newer */ -+ print_exit_status(err); -+ return err; -+} -+ -+ -+/* -+ * get one page from cache or lower f/s, return error otherwise. -+ * returns unlocked, up-to-date page (if ok), with increased refcnt. -+ */ -+page_t * -+mini_fo_get1page(file_t *file, int index) -+{ -+ page_t *page; -+ dentry_t *dentry; -+ inode_t *inode; -+ struct address_space *mapping; -+ int err; -+ -+ print_entry_location(); -+ -+ dentry = file->f_dentry; /* CPW: Moved below print_entry_location */ -+ inode = dentry->d_inode; -+ mapping = inode->i_mapping; -+ -+ fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid); -+ if (index < 0) { -+ printk("%s BUG: index=%d\n", __FUNCTION__, index); -+ page = ERR_PTR(-EIO); -+ goto out; -+ } -+ page = read_cache_page(mapping, -+ index, -+ (filler_t *) mapping->a_ops->readpage, -+ (void *) file); -+ if (IS_ERR(page)) -+ goto out; -+ wait_on_page(page); -+ if (!Page_Uptodate(page)) { -+ lock_page(page); -+ err = mapping->a_ops->readpage(file, page); -+ if (err) { -+ page = ERR_PTR(err); -+ goto out; -+ } -+ wait_on_page(page); -+ if (!Page_Uptodate(page)) { -+ page = ERR_PTR(-EIO); -+ goto out; -+ } -+ } -+ -+ out: -+ print_exit_pointer(page); -+ return page; -+} -+ -+ -+/* -+ * get one page from cache or lower f/s, return error otherwise. -+ * similar to get1page, but doesn't guarantee that it will return -+ * an unlocked page. -+ */ -+page_t * -+mini_fo_get1page_cached(file_t *file, int index) -+{ -+ page_t *page; -+ dentry_t *dentry; -+ inode_t *inode; -+ struct address_space *mapping; -+ int err; -+ -+ print_entry_location(); -+ -+ dentry = file->f_dentry; /* CPW: Moved below print_entry_location */ -+ inode = dentry->d_inode; -+ mapping = inode->i_mapping; -+ -+ fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid); -+ if (index < 0) { -+ printk("%s BUG: index=%d\n", __FUNCTION__, index); -+ page = ERR_PTR(-EIO); -+ goto out; -+ } -+ page = read_cache_page(mapping, -+ index, -+ (filler_t *) mapping->a_ops->readpage, -+ (void *) file); -+ if (IS_ERR(page)) -+ goto out; -+ -+ out: -+ print_exit_pointer(page); -+ return page; -+} -+ -+ -+/* -+ * readpage is called from generic_page_read and the fault handler. -+ * If your file system uses generic_page_read for the read op, it -+ * must implement readpage. -+ * -+ * Readpage expects a locked page, and must unlock it. -+ */ -+STATIC int -+mini_fo_do_readpage(file_t *file, page_t *page) -+{ -+ int err = -EIO; -+ dentry_t *dentry; -+ file_t *hidden_file = NULL; -+ dentry_t *hidden_dentry; -+ inode_t *inode; -+ inode_t *hidden_inode; -+ char *page_data; -+ page_t *hidden_page; -+ char *hidden_page_data; -+ int real_size; -+ -+ print_entry_location(); -+ -+ dentry = file->f_dentry; /* CPW: Moved below print_entry_location */ -+ if (ftopd(file) != NULL) -+ hidden_file = ftohf(file); -+ hidden_dentry = dtohd(dentry); -+ inode = dentry->d_inode; -+ hidden_inode = itohi(inode); -+ -+ fist_dprint(7, "%s: requesting page %d from file %s\n", __FUNCTION__, page->index, dentry->d_name.name); -+ -+ MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages); -+ MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages); -+ FOR_EACH_PAGE -+ CURRENT_HIDDEN_PAGE = NULL; -+ -+ /* find lower page (returns a locked page) */ -+ FOR_EACH_PAGE { -+ fist_dprint(8, "%s: Current page index = %d\n", __FUNCTION__, CURRENT_HIDDEN_PAGEINDEX); -+ CURRENT_HIDDEN_PAGE = read_cache_page(hidden_inode->i_mapping, -+ CURRENT_HIDDEN_PAGEINDEX, -+ (filler_t *) hidden_inode->i_mapping->a_ops->readpage, -+ (void *) hidden_file); -+ if (IS_ERR(CURRENT_HIDDEN_PAGE)) { -+ err = PTR_ERR(CURRENT_HIDDEN_PAGE); -+ CURRENT_HIDDEN_PAGE = NULL; -+ goto out_release; -+ } -+ } -+ -+ /* -+ * wait for the page data to show up -+ * (signaled by readpage as unlocking the page) -+ */ -+ FOR_EACH_PAGE { -+ wait_on_page(CURRENT_HIDDEN_PAGE); -+ if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) { -+ /* -+ * call readpage() again if we returned from wait_on_page with a -+ * page that's not up-to-date; that can happen when a partial -+ * page has a few buffers which are ok, but not the whole -+ * page. -+ */ -+ lock_page(CURRENT_HIDDEN_PAGE); -+ err = hidden_inode->i_mapping->a_ops->readpage(hidden_file, -+ CURRENT_HIDDEN_PAGE); -+ if (err) { -+ CURRENT_HIDDEN_PAGE = NULL; -+ goto out_release; -+ } -+ wait_on_page(CURRENT_HIDDEN_PAGE); -+ if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) { -+ err = -EIO; -+ goto out_release; -+ } -+ } -+ } -+ -+ /* map pages, get their addresses */ -+ page_data = (char *) kmap(page); -+ FOR_EACH_PAGE -+ CURRENT_HIDDEN_PAGEDATA = (char *) kmap(CURRENT_HIDDEN_PAGE); -+ -+ /* if decode_block could fail, then return error */ -+ err = 0; -+ real_size = hidden_inode->i_size - (page->index << PAGE_CACHE_SHIFT); -+ if (real_size <= 0) -+ memset(page_data, 0, PAGE_CACHE_SIZE); -+ else if (real_size < PAGE_CACHE_SIZE) { -+ mini_fo_decode_block(hidden_page_data, page_data, real_size, inode, inode->i_sb, page->index); -+ memset(page_data + real_size, 0, PAGE_CACHE_SIZE - real_size); -+ } else -+ mini_fo_decode_block(hidden_page_data, page_data, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index); -+ -+ FOR_EACH_PAGE -+ kunmap(CURRENT_HIDDEN_PAGE); -+ kunmap(page); -+ -+ out_release: -+ FOR_EACH_PAGE -+ if (CURRENT_HIDDEN_PAGE) -+ page_cache_release(CURRENT_HIDDEN_PAGE); /* undo read_cache_page */ -+ -+ FREE_PAGE_POINTERS(hidden_pages, num_hidden_pages); -+ FREE_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages); -+ -+ out: -+ if (err == 0) -+ SetPageUptodate(page); -+ else -+ ClearPageUptodate(page); -+ -+ print_exit_status(err); -+ return err; -+} -+ -+ -+STATIC int -+mini_fo_readpage(file_t *file, page_t *page) -+{ -+ int err; -+ print_entry_location(); -+ -+ err = mini_fo_do_readpage(file, page); -+ -+ /* -+ * we have to unlock our page, b/c we _might_ have gotten a locked page. -+ * but we no longer have to wakeup on our page here, b/c UnlockPage does -+ * it -+ */ -+ UnlockPage(page); -+ -+ print_exit_status(err); -+ return err; -+} -+ -+ -+STATIC int -+mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to) -+{ -+ int err = 0; -+ -+ print_entry_location(); -+ -+ /* -+ * we call kmap(page) only here, and do the kunmap -+ * and the actual downcalls, including unlockpage and uncache -+ * in commit_write. -+ */ -+ kmap(page); -+ -+ /* fast path for whole page writes */ -+ if (from == 0 && to == PAGE_CACHE_SIZE) -+ goto out; -+ /* read the page to "revalidate" our data */ -+ /* call the helper function which doesn't unlock the page */ -+ if (!Page_Uptodate(page)) -+ err = mini_fo_do_readpage(file, page); -+ -+ out: -+ print_exit_status(err); -+ return err; -+} -+ -+ -+ -+STATIC int -+mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to) -+{ -+ int err = -ENOMEM; -+ inode_t *inode; -+ inode_t *hidden_inode; -+ page_t *hidden_page; -+ file_t *hidden_file = NULL; -+ loff_t pos; -+ unsigned bytes = to - from; -+ unsigned hidden_from, hidden_to, hidden_bytes; -+ -+ print_entry_location(); -+ -+ inode = page->mapping->host; /* CPW: Moved below print_entry_location */ -+ hidden_inode = itohi(inode); -+ -+ ASSERT(file != NULL); -+ /* -+ * here we have a kmapped page, with data from the user copied -+ * into it. we need to encode_block it, and then call the lower -+ * commit_write. We also need to simulate same behavior of -+ * generic_file_write, and call prepare_write on the lower f/s first. -+ */ -+#ifdef FIST_COUNT_WRITES -+ count_writes++; -+# endif /* FIST_COUNT_WRITES */ -+ -+ /* this is append and/or extend -- we can't have holes so fill them in */ -+ if (page->index > (hidden_inode->i_size >> PAGE_CACHE_SHIFT)) { -+ page_t *tmp_page; -+ int index; -+ for (index = hidden_inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) { -+ tmp_page = mini_fo_get1page(file, index); -+ if (IS_ERR(tmp_page)) { -+ err = PTR_ERR(tmp_page); -+ goto out; -+ } -+ /* zero out the contents of the page at the appropriate offsets */ -+ memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK)); -+ if (!(err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE))) -+ err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE); -+ page_cache_release(tmp_page); -+ if (err < 0) -+ goto out; -+ if (current->need_resched) -+ schedule(); -+ } -+ } -+ -+ if (ftopd(file) != NULL) -+ hidden_file = ftohf(file); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_inode->i_mutex); -+#else -+ down(&hidden_inode->i_sem); -+#endif -+ /* find lower page (returns a locked page) */ -+ hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index); -+ if (!hidden_page) -+ goto out; -+ -+#if FIST_ENCODING_BLOCKSIZE > 1 -+# error encoding_blocksize greater than 1 is not yet supported -+# endif /* FIST_ENCODING_BLOCKSIZE > 1 */ -+ -+ hidden_from = from & (~(FIST_ENCODING_BLOCKSIZE - 1)); -+ hidden_to = ((to + FIST_ENCODING_BLOCKSIZE - 1) & (~(FIST_ENCODING_BLOCKSIZE - 1))); -+ if ((page->index << PAGE_CACHE_SHIFT) + to > hidden_inode->i_size) { -+ -+ /* -+ * if this call to commit_write had introduced holes and the code -+ * for handling holes was invoked, then the beginning of this page -+ * must be zeroed out -+ * zero out bytes from 'size_of_file%pagesize' to 'from'. -+ */ -+ if ((hidden_from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0) -+ memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, hidden_from - (inode->i_size & ~PAGE_CACHE_MASK)); -+ -+ } -+ hidden_bytes = hidden_to - hidden_from; -+ -+ /* call lower prepare_write */ -+ err = -EINVAL; -+ if (hidden_inode->i_mapping && -+ hidden_inode->i_mapping->a_ops && -+ hidden_inode->i_mapping->a_ops->prepare_write) -+ err = hidden_inode->i_mapping->a_ops->prepare_write(hidden_file, -+ hidden_page, -+ hidden_from, -+ hidden_to); -+ if (err) -+ /* don't leave locked pages behind, esp. on an ENOSPC */ -+ goto out_unlock; -+ -+ fist_dprint(8, "%s: encoding %d bytes\n", __FUNCTION__, hidden_bytes); -+ mini_fo_encode_block((char *) page_address(page) + hidden_from, (char*) page_address(hidden_page) + hidden_from, hidden_bytes, inode, inode->i_sb, page->index); -+ /* if encode_block could fail, then goto unlock and return error */ -+ -+ /* call lower commit_write */ -+ err = hidden_inode->i_mapping->a_ops->commit_write(hidden_file, -+ hidden_page, -+ hidden_from, -+ hidden_to); -+ -+ if (err < 0) -+ goto out_unlock; -+ -+ err = bytes; /* convert error to no. of bytes */ -+ -+ inode->i_blocks = hidden_inode->i_blocks; -+ /* we may have to update i_size */ -+ pos = (page->index << PAGE_CACHE_SHIFT) + to; -+ if (pos > inode->i_size) -+ inode->i_size = pos; -+ -+ /* -+ * update mtime and ctime of lower level file system -+ * mini_fo' mtime and ctime are updated by generic_file_write -+ */ -+ hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME; -+ -+ mark_inode_dirty_sync(inode); -+ -+ out_unlock: -+ UnlockPage(hidden_page); -+ page_cache_release(hidden_page); -+ kunmap(page); /* kmap was done in prepare_write */ -+ out: -+ /* we must set our page as up-to-date */ -+ if (err < 0) -+ ClearPageUptodate(page); -+ else -+ SetPageUptodate(page); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_inode->i_mutex); -+#else -+ up(&hidden_inode->i_sem); -+#endif -+ print_exit_status(err); -+ return err; /* assume all is ok */ -+} -+ -+ -+STATIC int -+mini_fo_bmap(struct address_space *mapping, long block) -+{ -+ int err = 0; -+ inode_t *inode; -+ inode_t *hidden_inode; -+ -+ print_entry_location(); -+ -+ inode = (inode_t *) mapping->host; -+ hidden_inode = itohi(inode); -+ -+ if (hidden_inode->i_mapping->a_ops->bmap) -+ err = hidden_inode->i_mapping->a_ops->bmap(hidden_inode->i_mapping, block); -+ print_exit_location(); -+ return err; -+} -+ -+ -+/* -+ * This function is copied verbatim from mm/filemap.c. -+ * XXX: It should be simply moved to some header file instead -- bug Al about it! -+ */ -+static inline int sync_page(struct page *page) -+{ -+ struct address_space *mapping = page->mapping; -+ -+ if (mapping && mapping->a_ops && mapping->a_ops->sync_page) -+ return mapping->a_ops->sync_page(page); -+ return 0; -+} -+ -+ -+/* -+ * XXX: we may not need this function if not FIST_FILTER_DATA. -+ * FIXME: for FIST_FILTER_SCA, get all lower pages and sync them each. -+ */ -+STATIC int -+mini_fo_sync_page(page_t *page) -+{ -+ int err = 0; -+ inode_t *inode; -+ inode_t *hidden_inode; -+ page_t *hidden_page; -+ -+ print_entry_location(); -+ -+ inode = page->mapping->host; /* CPW: Moved below print_entry_location */ -+ hidden_inode = itohi(inode); -+ -+ /* find lower page (returns a locked page) */ -+ hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index); -+ if (!hidden_page) -+ goto out; -+ -+ err = sync_page(hidden_page); -+ -+ UnlockPage(hidden_page); /* b/c grab_cache_page locked it */ -+ page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */ -+ -+ out: -+ print_exit_status(err); -+ return err; -+} -diff -urN linux-2.6.19.old/fs/mini_fo/README linux-2.6.19.dev/fs/mini_fo/README ---- linux-2.6.19.old/fs/mini_fo/README 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/README 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,163 @@ -+README for the mini_fo overlay file system -+========================================= -+ -+ -+WHAT IS MINI_FO? -+---------------- -+ -+mini_fo is a virtual kernel file system that can make read-only -+file systems writable. This is done by redirecting modifying operations -+to a writeable location called "storage directory", and leaving the -+original data in the "base directory" untouched. When reading, the -+file system merges the modifed and original data so that only the -+newest versions will appear. This occurs transparently to the user, -+who can access the data like on any other read-write file system. -+ -+Base and storage directories may be located on the same or on -+different partitions and may be of different file system types. While -+the storage directory obviously needs to be writable, the base may or -+may not be writable, what doesn't matter as it will no be modified -+anyway. -+ -+ -+WHAT IS GOOD FOR? -+----------------- -+ -+The primary purpose of the mini_fo file system is to allow easy -+software updates to embedded systems, that often store their root -+file system in a read-only flash file system, but there are many -+more as for example sandboxing, or for allowing live-cds to -+permanently store information. -+ -+ -+BUILDING -+-------- -+This should be simple. Adjust the Makefile to point to the correct -+kernel headers you want to build the module for. Then: -+ -+ # make -+ -+should build "mini_fo.o" for a 2.4 kernel or "mini_fo.ko" for a 2.6 -+kernel. -+ -+If you are building the module for you current kernel, you can install -+the module (as root): -+ -+ # make install -+ -+or uninstall with -+ -+ # make uninstall -+ -+ -+USING THE FILE SYSTEM -+-------------------- -+ -+the general mount syntax is: -+ -+ mount -t mini_fo -o base=,sto=\ -+ -+ -+Example: -+ -+You have mounted a cdrom to /mnt/cdrom and want to modifiy some files -+on it: -+ -+load the module (as root) -+ -+ # insmod mini_fo.o for a 2.4 kernel or -+ -+ # insmod mini_fo.ko for a 2.6 kernel -+ -+ -+create a storage dir in tmp and a mountpoint for mini_fo: -+ -+ # mkdir /tmp/sto -+ # mkdir /mnt/mini_fo -+ -+and mount the mini_fo file system: -+ -+ # mount -t mini_fo -o base=/mnt/cdrom,sto=/tmp/sto /mnt/cdrom /mnt/mini_fo -+ -+ -+Now the data stored on the cd can be accessed via the mini_fo -+mountpoint just like any read-write file system, files can be modified -+and deleted, new ones can be created and so on. When done unmount the -+file system: -+ -+ # unmount /mnt/mini_fo -+ -+Note that if the file system is mounted again using the same storage -+file system, of course it will appear in the modified state again. If -+you remount it using an new empty storage directory, it will be -+unmodified. Therefore by executing: -+ -+ # cd /tmp/sto -+ # rm -rf * -+ -+you can nuke all the changes you made to the original file system. But -+ remember NEVER do this while the mini_fo file system is mounted! -+ -+ -+Alternatively you can use the mini_fo-overlay bash script, that -+simplifies managing mini_fo mounts. See TOOLS Section. -+ -+ -+TOOLS -+----- -+ -+mini_fo-merge (experimental): -+ -+This is a bash script that will merge changes contained in the storage -+directory back to the base directory. This allows mini_fo to function -+as a cache file system by overlaying a slow (network, ...) file system -+and using a fast (ramdisk, ...) as storage. When done, changes can be -+merged back to the (slow) base with mini_fo-merge. See "mini_fo-merge -+-h" for details. -+ -+It can be usefull for merging changes back after a successfull test -+(patches, software updates...) -+ -+ -+mini_fo-overlay: -+ -+This bash script simplifies managing one or more mini_fo mounts. For -+overlaying a directory called "basedir1", you can just call: -+ -+ # mini_fo-overlay basedir1 -+ -+This will mount mini_fo with "basedir1" as base, "/tmp/sto-basedir1/" -+as storage to "/mnt/mini_fo-basedir1/". It has more options though, -+type "mini_fo-overlay -h" for details. -+ -+ -+DOCUMENTATION, REPORTING BUGS, GETTING HELP -+------------------------------------------- -+ -+Please visit the mini_fo project page at: -+ -+http://www.denx.de/twiki/bin/view/Know/MiniFOHome -+ -+ -+WARNINGS -+-------- -+ -+Never modify the base or the storage directorys while the mini_fo -+file system is mounted, or you might crash you system. Simply accessing -+and reading should not cause any trouble. -+ -+Exporting a mini_fo mount point via NFS has not been tested, and may -+or may not work. -+ -+Check the RELEASE_NOTES for details on bugs and features. -+ -+ -+ -+Copyright (C) 2004, 2005 Markus Klotzbuecher -+ -+This program is free software; you can redistribute it and/or -+modify it under the terms of the GNU General Public License -+as published by the Free Software Foundation; either version -+2 of the License, or (at your option) any later version. -+ -+ -diff -urN linux-2.6.19.old/fs/mini_fo/RELEASE_NOTES linux-2.6.19.dev/fs/mini_fo/RELEASE_NOTES ---- linux-2.6.19.old/fs/mini_fo/RELEASE_NOTES 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/RELEASE_NOTES 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,111 @@ -+Release: mini_fo-0.6.1 (v0-6-1) -+Date: 21.09.2005 -+ -+ -+Changes: -+-------- -+v0-6-1: -+ -+- bugfixes (see ChangeLog) -+ -+- two helper scripts "mini_fo_merge" and "mini_fo_overlay" (see -+ README for details). -+ -+v0-6-0: -+ -+- Support for 2.4 and 2.6 (see Makefile) -+ -+- Partial hard link support (creating works as expected, but already -+ existing links in the base file system will be treated as if they -+ were individual files). -+ -+- Various bugfixes and cleanups. -+ -+ -+v0-6-0-pre1: -+ -+- This is mini_fo-0-6-0-pre1! This release is a complete rewrite of -+ many vital mini_fo parts such as the old whiteout list code which -+ has been replaced by the new META subsystem. -+ -+- Light weight directory renaming implemented. This means if a -+ directory is renamed via the mini_fo filesystem this will no longer -+ result in a complete copy in storage, instead only one empty -+ directory will be created. All base filed contained in the original -+ directory stay there until modified. -+ -+- Special files (creating, renaming, deleting etc.) now working. -+ -+- Many bugfixes and cleanup, mini_fo is now a lot more stable. -+ -+ -+v0-5-10: -+ -+- Final release of the 0-5-* versions. Next will be a complete rewrite -+ of many features. This release contains several bugfixes related to -+ directory renaming. -+ -+ -+v0-5-10-pre6: -+ -+- Lots of cleanup and several bugfixes related to directory deleting -+ -+- Directory renaming suddenly works, what is most likely due to the -+ fact tha that "mv" is smart: if the classic rename doesn't work it -+ will assume that source and target file are on different fs and will -+ copy the directory and try to remove the source directory. Until -+ directory removing wasn't implemented, it would fail to do this and -+ rollback. -+ So, directory renaming works for now, but it doesn't yet do what you -+ would expect from a overlay fs, so use with care. -+ -+ -+v0-5-10-pre5: -+ -+- implemented directory deleting -+- made parsing of mount options more stable -+- New format of mount options! (See README) -+- I can't reproduce the unknown panic with 2.4.25 anymore, so I'll -+ happily assume it never existed! -+ -+ -+Implemented features: -+--------------------- -+ -+- creating hard links (see BUGS on already existing hard links) -+- lightweight directory renaming -+- renaming device files, pipes, sockets, etc. -+- creating, renaming, deleting of special files -+- deleting directorys -+- general directory reading (simple "ls" ) -+- creating files in existing directorys -+- creating directorys -+- renaming files. -+- reading and writing files (involves opening) -+- appending to files (creates copy in storage) -+- deleting files -+- llseek works too, what allows editors to work -+- persistency (a deleted file stay deleted over remounts) -+- use of symbolic links -+- creating of device files -+ -+ -+Not (yet) implemented features: -+------------------------------- -+ -+- full hard link support. -+ -+ -+ -+BUGS: -+----- -+ -+Hard links in the base file system will be treated as individual -+files, not as links to one inode. -+ -+The main problem with hard links isn't allowing to create them, but -+their pure existence. If you modify a base hard link, the changes made -+will only show up on this link, the other link will remain in the -+original state. I hope to fix this someday. Please note that this does -+not effect the special hard links '.' and '..', that are handled -+seperately by the lower fs. -diff -urN linux-2.6.19.old/fs/mini_fo/state.c linux-2.6.19.dev/fs/mini_fo/state.c ---- linux-2.6.19.old/fs/mini_fo/state.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/state.c 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,620 @@ -+/* -+ * Copyright (C) 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+#ifdef HAVE_CONFIG_H -+# include -+#endif /* HAVE_CONFIG_H */ -+ -+#include "fist.h" -+#include "mini_fo.h" -+ -+ -+/* create the storage file, setup new states */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd) -+#else -+int create_sto_reg_file(dentry_t *dentry, int mode) -+#endif -+{ -+ int err = 0; -+ inode_t *dir; -+ dentry_t *hidden_sto_dentry; -+ dentry_t *hidden_sto_dir_dentry; -+ -+ if(exists_in_storage(dentry)) { -+ printk(KERN_CRIT "mini_fo: create_sto_file: wrong type or state.\n"); -+ err = -EINVAL; -+ goto out; -+ } -+ err = get_neg_sto_dentry(dentry); -+ -+ if (err) { -+ printk(KERN_CRIT "mini_fo: create_sto_file: ERROR getting neg. sto dentry.\n"); -+ goto out; -+ } -+ -+ dir = dentry->d_parent->d_inode; -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ /* lock parent */ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ err = PTR_ERR(hidden_sto_dir_dentry); -+ if (IS_ERR(hidden_sto_dir_dentry)) -+ goto out; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ err = vfs_create(hidden_sto_dir_dentry->d_inode, -+ hidden_sto_dentry, -+ mode, nd); -+#else -+ err = vfs_create(hidden_sto_dir_dentry->d_inode, -+ hidden_sto_dentry, -+ mode); -+#endif -+ if(err) { -+ printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file.\n"); -+ goto out_lock; -+ } -+ -+ if(!dtohd2(dentry)->d_inode) { -+ printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file [2].\n"); -+ err = -EINVAL; -+ goto out_lock; -+ } -+ -+ /* interpose the new inode */ -+ if(dtost(dentry) == DELETED) { -+ dtost(dentry) = DEL_REWRITTEN; -+ err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0); -+ if(err) -+ goto out_lock; -+ } -+ else if(dtost(dentry) == NON_EXISTANT) { -+ dtost(dentry) = CREATED; -+ err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0); -+ if(err) -+ goto out_lock; -+ } -+ else if(dtost(dentry) == UNMODIFIED) { -+ dtost(dentry) = MODIFIED; -+ /* interpose on new inode */ -+ if(itohi2(dentry->d_inode) != NULL) { -+ printk(KERN_CRIT "mini_fo: create_sto_file: invalid inode detected.\n"); -+ err = -EINVAL; -+ goto out_lock; -+ } -+ itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode); -+ } -+ fist_copy_attr_timesizes(dentry->d_parent->d_inode, -+ hidden_sto_dir_dentry->d_inode); -+ -+ out_lock: -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ out: -+ return err; -+} -+ -+/* create the sto dir, setup states */ -+int create_sto_dir(dentry_t *dentry, int mode) -+{ -+ int err = 0; -+ inode_t *dir; -+ dentry_t *hidden_sto_dentry; -+ dentry_t *hidden_sto_dir_dentry; -+ -+ /* had to take the "!S_ISDIR(mode))" check out, because it failed */ -+ if(exists_in_storage(dentry)) { -+ printk(KERN_CRIT "mini_fo: create_sto_dir: wrong type or state.\\ -+n"); -+ err = -EINVAL; -+ goto out; -+ } -+ -+ err = get_neg_sto_dentry(dentry); -+ if(err) { -+ err = -EINVAL; -+ goto out; -+ } -+ -+ dir = dentry->d_parent->d_inode; -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ /* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ err = PTR_ERR(hidden_sto_dir_dentry); -+ if (IS_ERR(hidden_sto_dir_dentry)) -+ goto out; -+ -+ err = vfs_mkdir(hidden_sto_dir_dentry->d_inode, -+ hidden_sto_dentry, -+ mode); -+ if(err) { -+ printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir.\n"); -+ goto out_lock; -+ } -+ -+ if(!dtohd2(dentry)->d_inode) { -+ printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir [2].\n"); -+ err = -EINVAL; -+ goto out_lock; -+ } -+ -+ /* interpose the new inode */ -+ if(dtost(dentry) == DELETED) { -+ dtost(dentry) = DEL_REWRITTEN; -+ err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0); -+ if(err) -+ goto out_lock; -+ } -+ else if(dtopd(dentry)->state == NON_EXISTANT) { -+ dtopd(dentry)->state = CREATED; -+ err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0); -+ if(err) -+ goto out_lock; -+ } -+ else if(dtopd(dentry)->state == UNMODIFIED) { -+ dtopd(dentry)->state = MODIFIED; -+ /* interpose on new inode */ -+ if(itohi2(dentry->d_inode) != NULL) { -+ printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR, invalid inode detected.\n"); -+ err = -EINVAL; -+ goto out_lock; -+ } -+ itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode); -+ } -+ -+ fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode); -+ -+ /* initalize the wol list */ -+ itopd(dentry->d_inode)->deleted_list_size = -1; -+ itopd(dentry->d_inode)->renamed_list_size = -1; -+ meta_build_lists(dentry); -+ -+ -+ out_lock: -+ /* was: unlock_dir(hidden_sto_dir_dentry); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ out: -+ return err; -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+int create_sto_nod(dentry_t *dentry, int mode, dev_t dev) -+#else -+int create_sto_nod(dentry_t *dentry, int mode, int dev) -+#endif -+{ -+ int err = 0; -+ inode_t *dir; -+ dentry_t *hidden_sto_dentry; -+ dentry_t *hidden_sto_dir_dentry; -+ -+ if(exists_in_storage(dentry)) { -+ err = -EEXIST; -+ goto out; -+ } -+ err = get_neg_sto_dentry(dentry); -+ -+ if (err) { -+ printk(KERN_CRIT "mini_fo: create_sto_nod: ERROR getting neg. sto dentry.\n"); -+ goto out; -+ } -+ -+ dir = dentry->d_parent->d_inode; -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ /* lock parent */ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ err = PTR_ERR(hidden_sto_dir_dentry); -+ if (IS_ERR(hidden_sto_dir_dentry)) -+ goto out; -+ -+ err = vfs_mknod(hidden_sto_dir_dentry->d_inode, hidden_sto_dentry, mode, dev); -+ if(err) -+ goto out_lock; -+ -+ if(!dtohd2(dentry)->d_inode) { -+ printk(KERN_CRIT "mini_fo: create_sto_nod: creating storage inode failed [1].\n"); -+ err = -EINVAL; /* return something indicating failure */ -+ goto out_lock; -+ } -+ -+ /* interpose the new inode */ -+ if(dtost(dentry) == DELETED) { -+ dtost(dentry) = DEL_REWRITTEN; -+ err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0); -+ if(err) -+ goto out_lock; -+ } -+ else if(dtost(dentry) == NON_EXISTANT) { -+ dtost(dentry) = CREATED; -+ err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0); -+ if(err) -+ goto out_lock; -+ } -+ else if(dtost(dentry) == UNMODIFIED) { -+ dtost(dentry) = MODIFIED; -+ /* interpose on new inode */ -+ if(itohi2(dentry->d_inode) != NULL) { -+ printk(KERN_CRIT "mini_fo: create_sto_nod: error, invalid inode detected.\n"); -+ err = -EINVAL; -+ goto out_lock; -+ } -+ itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode); -+ } -+ -+ fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode); -+ -+ out_lock: -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ out: -+ return err; -+} -+ -+ -+/* unimplemented (and possibly not usefull): -+ -+ nondir-del_to_del_rew -+ nondir-non_exist_to_creat -+ -+ dir-unmod_to_del -+ dir-mod_to_del -+ dir-creat_to_del -+ dir-del_rew_to_del -+ dir-del_to_del_rew -+ dir-non_exist_to_creat -+*/ -+ -+ -+/* bring a file of any type from state UNMODIFIED to MODIFIED */ -+int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag) -+{ -+ int err = 0; -+ struct vfsmount *tgt_mnt; -+ struct vfsmount *src_mnt; -+ dentry_t *tgt_dentry; -+ dentry_t *src_dentry; -+ dentry_t *hidden_sto_dentry; -+ dentry_t *hidden_sto_dir_dentry; -+ -+ check_mini_fo_dentry(dentry); -+ -+ if((dtost(dentry) != UNMODIFIED) || -+ S_ISDIR(dentry->d_inode->i_mode)) { -+ printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \ -+ wrong type or state.\n"); -+ err = -1; -+ goto out; -+ } -+ err = get_neg_sto_dentry(dentry); -+ -+ if (err) { -+ printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \ -+ ERROR getting neg. sto dentry.\n"); -+ goto out; -+ } -+ -+ /* create sto file */ -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ /* lock parent */ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ err = PTR_ERR(hidden_sto_dir_dentry); -+ if (IS_ERR(hidden_sto_dir_dentry)) -+ goto out; -+ -+ /* handle different types of nondirs */ -+ if(S_ISCHR(dentry->d_inode->i_mode) || -+ S_ISBLK(dentry->d_inode->i_mode)) { -+ err = vfs_mknod(hidden_sto_dir_dentry->d_inode, -+ hidden_sto_dentry, -+ dtohd(dentry)->d_inode->i_mode, -+ dtohd(dentry)->d_inode->i_rdev); -+ } -+ -+ else if(S_ISREG(dentry->d_inode->i_mode)) { -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ err = vfs_create(hidden_sto_dir_dentry->d_inode, -+ hidden_sto_dentry, -+ dtohd(dentry)->d_inode->i_mode, NULL); -+#else -+ err = vfs_create(hidden_sto_dir_dentry->d_inode, -+ hidden_sto_dentry, -+ dtohd(dentry)->d_inode->i_mode); -+#endif -+ } -+ if(err) { -+ printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \ -+ ERROR creating sto file.\n"); -+ goto out_lock; -+ } -+ -+ /* interpose on new inode */ -+ if(itohi2(dentry->d_inode) != NULL) { -+ printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \ -+ ERROR, invalid inode detected.\n"); -+ err = -EINVAL; -+ goto out_lock; -+ } -+ -+ itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode); -+ -+ fist_copy_attr_timesizes(dentry->d_parent->d_inode, -+ hidden_sto_dir_dentry->d_inode); -+ dtost(dentry) = MODIFIED; -+ -+ /* copy contents if regular file and cp_flag = 1 */ -+ if((cp_flag == 1) && S_ISREG(dentry->d_inode->i_mode)) { -+ -+ /* unlock first */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ dput(hidden_sto_dir_dentry); -+ -+ tgt_dentry = dtohd2(dentry); -+ tgt_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2; -+ src_dentry = dtohd(dentry); -+ src_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt; -+ -+ err = mini_fo_cp_cont(tgt_dentry, tgt_mnt, -+ src_dentry, src_mnt); -+ if(err) { -+ printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \ -+ ERROR copying contents.\n"); -+ } -+ goto out; -+ } -+ -+ out_lock: -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ out: -+ return err; -+} -+ -+/* this function is currently identical to nondir_creat_to_del */ -+int nondir_del_rew_to_del(dentry_t *dentry) -+{ -+ return nondir_creat_to_del(dentry); -+} -+ -+int nondir_creat_to_del(dentry_t *dentry) -+{ -+ int err = 0; -+ -+ inode_t *hidden_sto_dir_inode; -+ dentry_t *hidden_sto_dir_dentry; -+ dentry_t *hidden_sto_dentry; -+ -+ check_mini_fo_dentry(dentry); -+ -+ /* for now this function serves for both state DEL_REWRITTEN and -+ * CREATED */ -+ if(!(dtost(dentry) == CREATED || (dtost(dentry) == DEL_REWRITTEN)) || -+ S_ISDIR(dentry->d_inode->i_mode)) { -+ printk(KERN_CRIT "mini_fo: nondir_mod_to_del/del_rew_to_del: \ -+ wrong type or state.\n"); -+ err = -1; -+ goto out; -+ } -+ -+ hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode); -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ /* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ /* avoid destroying the hidden inode if the file is in use */ -+ dget(hidden_sto_dentry); -+ err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry); -+ dput(hidden_sto_dentry); -+ if(!err) -+ d_delete(hidden_sto_dentry); -+ -+ /* propagate number of hard-links */ -+ dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink; -+ -+ dtost(dentry) = NON_EXISTANT; -+ -+ /* was: unlock_dir(hidden_sto_dir_dentry); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ -+ out: -+ return err; -+} -+ -+int nondir_mod_to_del(dentry_t *dentry) -+{ -+ int err; -+ dentry_t *hidden_sto_dentry; -+ inode_t *hidden_sto_dir_inode; -+ dentry_t *hidden_sto_dir_dentry; -+ -+ check_mini_fo_dentry(dentry); -+ -+ if(dtost(dentry) != MODIFIED || -+ S_ISDIR(dentry->d_inode->i_mode)) { -+ printk(KERN_CRIT "mini_fo: nondir_mod_to_del: \ -+ wrong type or state.\n"); -+ err = -1; -+ goto out; -+ } -+ -+ hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode); -+ hidden_sto_dentry = dtohd2(dentry); -+ -+ /* was hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */ -+ hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent); -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ down(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ -+ /* avoid destroying the hidden inode if the file is in use */ -+ dget(hidden_sto_dentry); -+ err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry); -+ dput(hidden_sto_dentry); -+ if(!err) -+ d_delete(hidden_sto_dentry); -+ -+ /* propagate number of hard-links */ -+ dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink; -+ -+ /* dput base dentry, this will relase the inode and free the -+ * dentry, as we will never need it again. */ -+ dput(dtohd(dentry)); -+ dtohd(dentry) = NULL; -+ dtost(dentry) = DELETED; -+ -+ /* add deleted file to META-file */ -+ meta_add_d_entry(dentry->d_parent, -+ dentry->d_name.name, -+ dentry->d_name.len); -+ -+ /* was: unlock_dir(hidden_sto_dir_dentry); */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) -+ mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex); -+#else -+ up(&hidden_sto_dir_dentry->d_inode->i_sem); -+#endif -+ dput(hidden_sto_dir_dentry); -+ -+ out: -+ return err; -+} -+ -+int nondir_unmod_to_del(dentry_t *dentry) -+{ -+ int err = 0; -+ -+ check_mini_fo_dentry(dentry); -+ -+ if(dtost(dentry) != UNMODIFIED || -+ S_ISDIR(dentry->d_inode->i_mode)) { -+ printk(KERN_CRIT "mini_fo: nondir_unmod_to_del: \ -+ wrong type or state.\n"); -+ err = -1; -+ goto out; -+ } -+ -+ /* next we have to get a negative dentry for the storage file */ -+ err = get_neg_sto_dentry(dentry); -+ -+ if(err) -+ goto out; -+ -+ /* add deleted file to META lists */ -+ err = meta_add_d_entry(dentry->d_parent, -+ dentry->d_name.name, -+ dentry->d_name.len); -+ -+ if(err) -+ goto out; -+ -+ /* dput base dentry, this will relase the inode and free the -+ * dentry, as we will never need it again. */ -+ dput(dtohd(dentry)); -+ dtohd(dentry) = NULL; -+ dtost(dentry) = DELETED; -+ -+ out: -+ return err; -+} -+ -+/* bring a dir from state UNMODIFIED to MODIFIED */ -+int dir_unmod_to_mod(dentry_t *dentry) -+{ -+ int err; -+ -+ check_mini_fo_dentry(dentry); -+ -+ if(dtost(dentry) != UNMODIFIED || -+ !S_ISDIR(dentry->d_inode->i_mode)) { -+ printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \ -+ wrong type or state.\n"); -+ err = -1; -+ goto out; -+ } -+ -+ /* this creates our dir incl. sto. structure */ -+ err = build_sto_structure(dentry->d_parent, dentry); -+ if(err) { -+ printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \ -+ build_sto_structure failed.\n"); -+ goto out; -+ } -+ out: -+ return err; -+} -+ -diff -urN linux-2.6.19.old/fs/mini_fo/super.c linux-2.6.19.dev/fs/mini_fo/super.c ---- linux-2.6.19.old/fs/mini_fo/super.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.dev/fs/mini_fo/super.c 2006-12-14 03:14:03.000000000 +0100 -@@ -0,0 +1,281 @@ -+/* -+ * Copyright (c) 1997-2003 Erez Zadok -+ * Copyright (c) 2001-2003 Stony Brook University -+ * -+ * For specific licensing information, see the COPYING file distributed with -+ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING. -+ * -+ * This Copyright notice must be kept intact and distributed with all -+ * fistgen sources INCLUDING sources generated by fistgen. -+ */ -+/* -+ * Copyright (C) 2004, 2005 Markus Klotzbuecher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+/* -+ * $Id$ -+ */ -+ -+#ifdef HAVE_CONFIG_H -+# include -+#endif -+ -+#include "fist.h" -+#include "mini_fo.h" -+ -+ -+STATIC void -+mini_fo_read_inode(inode_t *inode) -+{ -+ static struct address_space_operations mini_fo_empty_aops; -+ -+ __itopd(inode) = kmalloc(sizeof(struct mini_fo_inode_info), GFP_KERNEL); -+ if (!itopd(inode)) { -+ printk("<0>%s:%s:%d: No kernel memory!\n", __FILE__, __FUNCTION__, __LINE__); -+ ASSERT(NULL); -+ } -+ itohi(inode) = NULL; -+ itohi2(inode) = NULL; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ inode->i_version++; -+#else -+ inode->i_version = ++event; /* increment inode version */ -+#endif -+ inode->i_op = &mini_fo_main_iops; -+ inode->i_fop = &mini_fo_main_fops; -+#if 0 -+ /* -+ * XXX: To export a file system via NFS, it has to have the -+ * FS_REQUIRES_DEV flag, so turn it on. But should we inherit it from -+ * the lower file system, or can we allow our file system to be exported -+ * even if the lower one cannot be natively exported. -+ */ -+ inode->i_sb->s_type->fs_flags |= FS_REQUIRES_DEV; -+ /* -+ * OK, the above was a hack, which is now turned off because it may -+ * cause a panic/oops on some systems. The correct way to export a -+ * "nodev" filesystem is via using nfs-utils > 1.0 and the "fsid=" export -+ * parameter, which requires 2.4.20 or later. -+ */ -+#endif -+ /* I don't think ->a_ops is ever allowed to be NULL */ -+ inode->i_mapping->a_ops = &mini_fo_empty_aops; -+} -+ -+ -+#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) -+/* -+ * No need to call write_inode() on the lower inode, as it -+ * will have been marked 'dirty' anyway. But we might need -+ * to write some of our own stuff to disk. -+ */ -+STATIC void -+mini_fo_write_inode(inode_t *inode, int sync) -+{ -+ print_entry_location(); -+ print_exit_location(); -+} -+#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */ -+ -+ -+STATIC void -+mini_fo_put_inode(inode_t *inode) -+{ -+ /* -+ * This is really funky stuff: -+ * Basically, if i_count == 1, iput will then decrement it and this inode will be destroyed. -+ * It is currently holding a reference to the hidden inode. -+ * Therefore, it needs to release that reference by calling iput on the hidden inode. -+ * iput() _will_ do it for us (by calling our clear_inode), but _only_ if i_nlink == 0. -+ * The problem is, NFS keeps i_nlink == 1 for silly_rename'd files. -+ * So we must for our i_nlink to 0 here to trick iput() into calling our clear_inode. -+ */ -+ if (atomic_read(&inode->i_count) == 1) -+ inode->i_nlink = 0; -+} -+ -+ -+#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) -+/* -+ * we now define delete_inode, because there are two VFS paths that may -+ * destroy an inode: one of them calls clear inode before doing everything -+ * else that's needed, and the other is fine. This way we truncate the inode -+ * size (and its pages) and then clear our own inode, which will do an iput -+ * on our and the lower inode. -+ */ -+STATIC void -+mini_fo_delete_inode(inode_t *inode) -+{ -+ print_entry_location(); -+ -+ fist_checkinode(inode, "mini_fo_delete_inode IN"); -+ inode->i_size = 0; /* every f/s seems to do that */ -+ clear_inode(inode); -+ -+ print_exit_location(); -+} -+#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */ -+ -+ -+/* final actions when unmounting a file system */ -+STATIC void -+mini_fo_put_super(super_block_t *sb) -+{ -+ if (stopd(sb)) { -+ mntput(stopd(sb)->hidden_mnt); -+ mntput(stopd(sb)->hidden_mnt2); -+ -+ /* mk: no! dput(stopd(sb)->base_dir_dentry); -+ dput(stopd(sb)->storage_dir_dentry); */ -+ -+ kfree(stopd(sb)); -+ __stopd(sb) = NULL; -+ } -+} -+ -+ -+#ifdef NOT_NEEDED -+/* -+ * This is called in do_umount before put_super. -+ * The superblock lock is not held yet. -+ * We probably do not need to define this or call write_super -+ * on the hidden_sb, because sync_supers() will get to hidden_sb -+ * sooner or later. But it is also called from file_fsync()... -+ */ -+STATIC void -+mini_fo_write_super(super_block_t *sb) -+{ -+ return; -+} -+#endif /* NOT_NEEDED */ -+ -+ -+STATIC int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+mini_fo_statfs(struct dentry *d, struct kstatfs *buf) -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+mini_fo_statfs(super_block_t *sb, struct kstatfs *buf) -+#else -+mini_fo_statfs(super_block_t *sb, struct statfs *buf) -+#endif -+{ -+ int err = 0; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+ struct dentry *hidden_d; -+ -+ hidden_d = dtohd(d); -+ err = vfs_statfs(hidden_d, buf); -+#else -+ super_block_t *hidden_sb; -+ -+ hidden_sb = stohs(sb); -+ err = vfs_statfs(hidden_sb, buf); -+#endif -+ -+ return err; -+} -+ -+ -+/* -+ * XXX: not implemented. This is not allowed yet. -+ * Should we call this on the hidden_sb? Probably not. -+ */ -+STATIC int -+mini_fo_remount_fs(super_block_t *sb, int *flags, char *data) -+{ -+ //printk(KERN_CRIT "mini_fo_remount_fs: WARNING, this function is umimplemented.\n"); -+ return -ENOSYS; -+} -+ -+ -+/* -+ * Called by iput() when the inode reference count reached zero -+ * and the inode is not hashed anywhere. Used to clear anything -+ * that needs to be, before the inode is completely destroyed and put -+ * on the inode free list. -+ */ -+STATIC void -+mini_fo_clear_inode(inode_t *inode) -+{ -+ /* -+ * Decrement a reference to a hidden_inode, which was incremented -+ * by our read_inode when it was created initially. -+ */ -+ -+ /* release the wol_list */ -+ if(S_ISDIR(inode->i_mode)) { -+ __meta_put_lists(inode); -+ } -+ -+ /* mk: fan out fun */ -+ if(itohi(inode)) -+ iput(itohi(inode)); -+ if(itohi2(inode)) -+ iput(itohi2(inode)); -+ -+ // XXX: why this assertion fails? -+ // because it doesn't like us -+ // ASSERT((inode->i_state & I_DIRTY) == 0); -+ kfree(itopd(inode)); -+ __itopd(inode) = NULL; -+} -+ -+ -+/* -+ * Called in do_umount() if the MNT_FORCE flag was used and this -+ * function is defined. See comment in linux/fs/super.c:do_umount(). -+ * Used only in nfs, to kill any pending RPC tasks, so that subsequent -+ * code can actually succeed and won't leave tasks that need handling. -+ * -+ * PS. I wonder if this is somehow useful to undo damage that was -+ * left in the kernel after a user level file server (such as amd) -+ * dies. -+ */ -+STATIC void -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18) -+mini_fo_umount_begin(struct vfsmount *mnt, int flags) -+{ -+ struct vfsmount *hidden_mnt; -+ -+ hidden_mnt = stopd(mnt->mnt_sb)->hidden_mnt; -+ -+ if (hidden_mnt->mnt_sb->s_op->umount_begin) -+ hidden_mnt->mnt_sb->s_op->umount_begin(hidden_mnt, flags); -+ -+} -+#else -+mini_fo_umount_begin(super_block_t *sb) -+{ -+ super_block_t *hidden_sb; -+ -+ hidden_sb = stohs(sb); -+ -+ if (hidden_sb->s_op->umount_begin) -+ hidden_sb->s_op->umount_begin(hidden_sb); -+ -+} -+#endif -+ -+ -+struct super_operations mini_fo_sops = -+{ -+ read_inode: mini_fo_read_inode, -+#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) -+ write_inode: mini_fo_write_inode, -+#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */ -+ put_inode: mini_fo_put_inode, -+#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) -+ delete_inode: mini_fo_delete_inode, -+#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */ -+ put_super: mini_fo_put_super, -+ statfs: mini_fo_statfs, -+ remount_fs: mini_fo_remount_fs, -+ clear_inode: mini_fo_clear_inode, -+ umount_begin: mini_fo_umount_begin, -+}; diff --git a/target/linux/etrax/patches/generic_2.6/210-d80211_compat.patch b/target/linux/etrax/patches/generic_2.6/210-d80211_compat.patch deleted file mode 100644 index 555151ba7f..0000000000 --- a/target/linux/etrax/patches/generic_2.6/210-d80211_compat.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux.old/include/linux/netdevice.h 2006-12-30 18:49:37.916951328 +0100 -+++ linux.dev/include/linux/netdevice.h 2006-12-30 18:49:49.573179312 +0100 -@@ -526,6 +526,8 @@ - struct class_device class_dev; - /* space for optional statistics and wireless sysfs groups */ - struct attribute_group *sysfs_groups[3]; -+ -+ void *ieee80211_ptr; - }; - - #define NETDEV_ALIGN 32 diff --git a/target/linux/etrax/patches/generic_2.6/211-no_block2mtd_readahead.patch b/target/linux/etrax/patches/generic_2.6/211-no_block2mtd_readahead.patch deleted file mode 100644 index 719fb37ff9..0000000000 --- a/target/linux/etrax/patches/generic_2.6/211-no_block2mtd_readahead.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux.old/drivers/mtd/devices/block2mtd.c 2007-02-01 20:13:47.147274772 +0100 -+++ linux/drivers/mtd/devices/block2mtd.c 2007-02-01 20:19:59.753034993 +0100 -@@ -40,7 +40,7 @@ - static LIST_HEAD(blkmtd_device_list); - - --#define PAGE_READAHEAD 64 -+#define PAGE_READAHEAD 0 - static void cache_readahead(struct address_space *mapping, int index) - { - filler_t *filler = (filler_t*)mapping->a_ops->readpage; diff --git a/target/linux/etrax/patches/generic_2.6/212-block2mtd_erase_scan.patch b/target/linux/etrax/patches/generic_2.6/212-block2mtd_erase_scan.patch deleted file mode 100644 index 76b4f5d4c9..0000000000 --- a/target/linux/etrax/patches/generic_2.6/212-block2mtd_erase_scan.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux.dev/drivers/mtd/devices/block2mtd.c.old 2007-02-18 14:08:59.519952312 +0100 -+++ linux.dev/drivers/mtd/devices/block2mtd.c 2007-02-18 14:09:04.219237912 +0100 -@@ -111,7 +111,7 @@ - if (IS_ERR(page)) - return PTR_ERR(page); - -- max = (u_long*)page_address(page) + PAGE_SIZE; -+ max = (u_long*) ((u8 *) page_address(page) + PAGE_SIZE); - for (p=(u_long*)page_address(page); p -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU Lesser General Public License version 2.1 as -+ * published by the Free Software Foundation. -+ * -+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL. -+ * -+ * This file is just holds extra declarations used during development. -+ * Most of these are from kernel includes placed here so we can use them in -+ * applications. -+ * -+ * $Id: devextras.h,v 1.2 2005/08/11 02:37:49 marty Exp $ -+ * -+ */ -+ -+#ifndef __EXTRAS_H__ -+#define __EXTRAS_H__ -+ -+#if defined WIN32 -+#define __inline__ __inline -+#define new newHack -+#endif -+ -+#if !(defined __KERNEL__) || (defined WIN32) -+ -+/* User space defines */ -+ -+typedef unsigned char __u8; -+typedef unsigned short __u16; -+typedef unsigned __u32; -+ -+/* -+ * Simple doubly linked list implementation. -+ * -+ * Some of the internal functions ("__xxx") are useful when -+ * manipulating whole lists rather than single entries, as -+ * sometimes we already know the next/prev entries and we can -+ * generate better code by using them directly rather than -+ * using the generic single-entry routines. -+ */ -+ -+#define prefetch(x) 1 -+ -+struct list_head { -+ struct list_head *next, *prev; -+}; -+ -+#define LIST_HEAD_INIT(name) { &(name), &(name) } -+ -+#define LIST_HEAD(name) \ -+ struct list_head name = LIST_HEAD_INIT(name) -+ -+#define INIT_LIST_HEAD(ptr) do { \ -+ (ptr)->next = (ptr); (ptr)->prev = (ptr); \ -+} while (0) -+ -+/* -+ * Insert a new entry between two known consecutive entries. -+ * -+ * This is only for internal list manipulation where we know -+ * the prev/next entries already! -+ */ -+static __inline__ void __list_add(struct list_head *new, -+ struct list_head *prev, -+ struct list_head *next) -+{ -+ next->prev = new; -+ new->next = next; -+ new->prev = prev; -+ prev->next = new; -+} -+ -+/** -+ * list_add - add a new entry -+ * @new: new entry to be added -+ * @head: list head to add it after -+ * -+ * Insert a new entry after the specified head. -+ * This is good for implementing stacks. -+ */ -+static __inline__ void list_add(struct list_head *new, struct list_head *head) -+{ -+ __list_add(new, head, head->next); -+} -+ -+/** -+ * list_add_tail - add a new entry -+ * @new: new entry to be added -+ * @head: list head to add it before -+ * -+ * Insert a new entry before the specified head. -+ * This is useful for implementing queues. -+ */ -+static __inline__ void list_add_tail(struct list_head *new, -+ struct list_head *head) -+{ -+ __list_add(new, head->prev, head); -+} -+ -+/* -+ * Delete a list entry by making the prev/next entries -+ * point to each other. -+ * -+ * This is only for internal list manipulation where we know -+ * the prev/next entries already! -+ */ -+static __inline__ void __list_del(struct list_head *prev, -+ struct list_head *next) -+{ -+ next->prev = prev; -+ prev->next = next; -+} -+ -+/** -+ * list_del - deletes entry from list. -+ * @entry: the element to delete from the list. -+ * Note: list_empty on entry does not return true after this, the entry is -+ * in an undefined state. -+ */ -+static __inline__ void list_del(struct list_head *entry) -+{ -+ __list_del(entry->prev, entry->next); -+} -+ -+/** -+ * list_del_init - deletes entry from list and reinitialize it. -+ * @entry: the element to delete from the list. -+ */ -+static __inline__ void list_del_init(struct list_head *entry) -+{ -+ __list_del(entry->prev, entry->next); -+ INIT_LIST_HEAD(entry); -+} -+ -+/** -+ * list_empty - tests whether a list is empty -+ * @head: the list to test. -+ */ -+static __inline__ int list_empty(struct list_head *head) -+{ -+ return head->next == head; -+} -+ -+/** -+ * list_splice - join two lists -+ * @list: the new list to add. -+ * @head: the place to add it in the first list. -+ */ -+static __inline__ void list_splice(struct list_head *list, -+ struct list_head *head) -+{ -+ struct list_head *first = list->next; -+ -+ if (first != list) { -+ struct list_head *last = list->prev; -+ struct list_head *at = head->next; -+ -+ first->prev = head; -+ head->next = first; -+ -+ last->next = at; -+ at->prev = last; -+ } -+} -+ -+/** -+ * list_entry - get the struct for this entry -+ * @ptr: the &struct list_head pointer. -+ * @type: the type of the struct this is embedded in. -+ * @member: the name of the list_struct within the struct. -+ */ -+#define list_entry(ptr, type, member) \ -+ ((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member))) -+ -+/** -+ * list_for_each - iterate over a list -+ * @pos: the &struct list_head to use as a loop counter. -+ * @head: the head for your list. -+ */ -+#define list_for_each(pos, head) \ -+ for (pos = (head)->next, prefetch(pos->next); pos != (head); \ -+ pos = pos->next, prefetch(pos->next)) -+ -+/** -+ * list_for_each_safe - iterate over a list safe against removal -+ * of list entry -+ * @pos: the &struct list_head to use as a loop counter. -+ * @n: another &struct list_head to use as temporary storage -+ * @head: the head for your list. -+ */ -+#define list_for_each_safe(pos, n, head) \ -+ for (pos = (head)->next, n = pos->next; pos != (head); \ -+ pos = n, n = pos->next) -+ -+/* -+ * File types -+ */ -+#define DT_UNKNOWN 0 -+#define DT_FIFO 1 -+#define DT_CHR 2 -+#define DT_DIR 4 -+#define DT_BLK 6 -+#define DT_REG 8 -+#define DT_LNK 10 -+#define DT_SOCK 12 -+#define DT_WHT 14 -+ -+#ifndef WIN32 -+#include -+#endif -+ -+/* -+ * Attribute flags. These should be or-ed together to figure out what -+ * has been changed! -+ */ -+#define ATTR_MODE 1 -+#define ATTR_UID 2 -+#define ATTR_GID 4 -+#define ATTR_SIZE 8 -+#define ATTR_ATIME 16 -+#define ATTR_MTIME 32 -+#define ATTR_CTIME 64 -+#define ATTR_ATIME_SET 128 -+#define ATTR_MTIME_SET 256 -+#define ATTR_FORCE 512 /* Not a change, but a change it */ -+#define ATTR_ATTR_FLAG 1024 -+ -+struct iattr { -+ unsigned int ia_valid; -+ unsigned ia_mode; -+ unsigned ia_uid; -+ unsigned ia_gid; -+ unsigned ia_size; -+ unsigned ia_atime; -+ unsigned ia_mtime; -+ unsigned ia_ctime; -+ unsigned int ia_attr_flags; -+}; -+ -+#define KERN_DEBUG -+ -+#else -+ -+#ifndef WIN32 -+#include -+#include -+#include -+#include -+#endif -+ -+#endif -+ -+#if defined WIN32 -+#undef new -+#endif -+ -+#endif -diff -urN linux.old/fs/yaffs2/Kconfig linux.dev/fs/yaffs2/Kconfig ---- linux.old/fs/yaffs2/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/Kconfig 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,135 @@ -+# -+# YAFFS file system configurations -+# -+ -+config YAFFS_FS -+ tristate "YAFFS2 file system support" -+ default n -+ depends on MTD -+ select YAFFS_YAFFS1 -+ select YAFFS_YAFFS2 -+ help -+ YAFFS2, or Yet Another Flash Filing System, is a filing system -+ optimised for NAND Flash chips. -+ -+ To compile the YAFFS2 file system support as a module, choose M here: -+ the module will be called yaffs2. -+ -+ If unsure, say N. -+ -+ Further information on YAFFS2 is available at -+ . -+ -+config YAFFS_YAFFS1 -+ bool "512 byte / page devices" -+ depends on YAFFS_FS -+ default y -+ help -+ Enable YAFFS1 support -- yaffs for 512 byte / page devices -+ -+ If unsure, say Y. -+ -+config YAFFS_DOES_ECC -+ bool "Lets Yaffs do its own ECC" -+ depends on YAFFS_FS && YAFFS_YAFFS1 -+ default n -+ help -+ This enables Yaffs to use its own ECC functions instead of using -+ the ones from the generic MTD-NAND driver. -+ -+ If unsure, say N. -+ -+config YAFFS_ECC_WRONG_ORDER -+ bool "Use the same ecc byte order as Steven Hill's nand_ecc.c" -+ depends on YAFFS_FS && YAFFS_DOES_ECC -+ default n -+ help -+ This makes yaffs_ecc.c use the same ecc byte order as -+ Steven Hill's nand_ecc.c. If not set, then you get the -+ same ecc byte order as SmartMedia. -+ -+ If unsure, say N. -+ -+config YAFFS_YAFFS2 -+ bool "2048 byte (or larger) / page devices" -+ depends on YAFFS_FS -+ default y -+ help -+ Enable YAFFS2 support -- yaffs for >= 2048 byte / page larger devices -+ -+ If unsure, say Y. -+ -+config YAFFS_AUTO_YAFFS2 -+ bool "Autoselect yaffs2 format" -+ depends on YAFFS_YAFFS2 -+ default y -+ help -+ Without this, you need to explicitely use yaffs2 as the file -+ system type. With this, you can say "yaffs" and yaffs or yaffs2 -+ will be used depending on the device page size. -+ -+ If unsure, say Y. -+ -+config YAFFS_DISABLE_LAZY_LOAD -+ bool "Disable lazy loading" -+ depends on YAFFS_YAFFS2 -+ default n -+ help -+ "Lazy loading" defers loading file details until they are -+ required. This saves mount time, but makes the first look-up -+ a bit longer. -+ -+ Lazy loading will only happen if enabled by this option being 'n' -+ and if the appropriate tags are available, else yaffs2 will -+ automatically fall back to immediate loading and do the right -+ thing. -+ -+ Lazy laoding will be required by checkpointing. -+ -+ Setting this to 'y' will disable lazy loading. -+ -+ If unsure, say N. -+ -+config YAFFS_DISABLE_WIDE_TNODES -+ bool "Turn off wide tnodes" -+ depends on YAFFS_FS -+ default n -+ help -+ Wide tnodes are only used for large NAND arrays (>=32MB for -+ 512-byte page devices and >=128MB for 2k page devices). They use -+ slightly more RAM but are faster since they eliminate chunk group -+ searching. -+ -+ Setting this to 'y' will force tnode width to 16 bits and make -+ large arrays slower. -+ -+ If unsure, say N. -+ -+config YAFFS_ALWAYS_CHECK_CHUNK_ERASED -+ bool "Force chunk erase check" -+ depends on YAFFS_FS -+ default n -+ help -+ Normally YAFFS only checks chunks before writing until an erased -+ chunk is found. This helps to detect any partially written chunks -+ that might have happened due to power loss. -+ -+ Enabling this forces on the test that chunks are erased in flash -+ before writing to them. This takes more time but is potentially a -+ bit more secure. -+ -+ Suggest setting Y during development and ironing out driver issues -+ etc. Suggest setting to N if you want faster writing. -+ -+ If unsure, say Y. -+ -+config YAFFS_SHORT_NAMES_IN_RAM -+ bool "Cache short names in RAM" -+ depends on YAFFS_FS -+ default y -+ help -+ If this config is set, then short names are stored with the -+ yaffs_Object. This costs an extra 16 bytes of RAM per object, -+ but makes look-ups faster. -+ -+ If unsure, say Y. -diff -urN linux.old/fs/yaffs2/Makefile linux.dev/fs/yaffs2/Makefile ---- linux.old/fs/yaffs2/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/Makefile 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,10 @@ -+# -+# Makefile for the linux YAFFS filesystem routines. -+# -+ -+obj-$(CONFIG_YAFFS_FS) += yaffs.o -+ -+yaffs-y := yaffs_ecc.o yaffs_fs.o yaffs_guts.o yaffs_checkptrw.o -+yaffs-y += yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o -+yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o -+yaffs-y += yaffs_mtdif.o yaffs_mtdif2.o -diff -urN linux.old/fs/yaffs2/moduleconfig.h linux.dev/fs/yaffs2/moduleconfig.h ---- linux.old/fs/yaffs2/moduleconfig.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/moduleconfig.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,32 @@ -+#ifndef __YAFFS_CONFIG_H__ -+#define __YAFFS_CONFIG_H__ -+ -+#ifdef YAFFS_OUT_OF_TREE -+ -+/* DO NOT UNSET THESE THREE. YAFFS2 will not compile if you do. */ -+#define CONFIG_YAFFS_FS -+#define CONFIG_YAFFS_YAFFS1 -+#define CONFIG_YAFFS_YAFFS2 -+ -+/* These options are independent of each other. Select those that matter. */ -+ -+/* Default: Not selected */ -+/* Meaning: Yaffs does its own ECC, rather than using MTD ECC */ -+//#define CONFIG_YAFFS_DOES_ECC -+ -+/* Default: Not selected */ -+/* Meaning: ECC byte order is 'wrong'. Only meaningful if */ -+/* CONFIG_YAFFS_DOES_ECC is set */ -+//#define CONFIG_YAFFS_ECC_WRONG_ORDER -+ -+/* Default: Selected */ -+/* Meaning: Disables testing whether chunks are erased before writing to them*/ -+#define CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK -+ -+/* Default: Selected */ -+/* Meaning: Cache short names, taking more RAM, but faster look-ups */ -+#define CONFIG_YAFFS_SHORT_NAMES_IN_RAM -+ -+#endif /* YAFFS_OUT_OF_TREE */ -+ -+#endif /* __YAFFS_CONFIG_H__ */ -diff -urN linux.old/fs/yaffs2/yaffs_checkptrw.c linux.dev/fs/yaffs2/yaffs_checkptrw.c ---- linux.old/fs/yaffs2/yaffs_checkptrw.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_checkptrw.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,384 @@ -+/* YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+const char *yaffs_checkptrw_c_version = -+ "$Id: yaffs_checkptrw.c,v 1.11 2006/11/11 23:27:04 charles Exp $"; -+ -+ -+#include "yaffs_checkptrw.h" -+ -+ -+static int yaffs_CheckpointSpaceOk(yaffs_Device *dev) -+{ -+ -+ int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks; -+ -+ T(YAFFS_TRACE_CHECKPOINT, -+ (TSTR("checkpt blocks available = %d" TENDSTR), -+ blocksAvailable)); -+ -+ -+ return (blocksAvailable <= 0) ? 0 : 1; -+} -+ -+ -+ -+static int yaffs_CheckpointErase(yaffs_Device *dev) -+{ -+ -+ int i; -+ -+ -+ if(!dev->eraseBlockInNAND) -+ return 0; -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("checking blocks %d to %d"TENDSTR), -+ dev->internalStartBlock,dev->internalEndBlock)); -+ -+ for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) { -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i); -+ if(bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT){ -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("erasing checkpt block %d"TENDSTR),i)); -+ if(dev->eraseBlockInNAND(dev,i- dev->blockOffset /* realign */)){ -+ bi->blockState = YAFFS_BLOCK_STATE_EMPTY; -+ dev->nErasedBlocks++; -+ dev->nFreeChunks += dev->nChunksPerBlock; -+ } -+ else { -+ dev->markNANDBlockBad(dev,i); -+ bi->blockState = YAFFS_BLOCK_STATE_DEAD; -+ } -+ } -+ } -+ -+ dev->blocksInCheckpoint = 0; -+ -+ return 1; -+} -+ -+ -+static void yaffs_CheckpointFindNextErasedBlock(yaffs_Device *dev) -+{ -+ int i; -+ int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks; -+ T(YAFFS_TRACE_CHECKPOINT, -+ (TSTR("allocating checkpt block: erased %d reserved %d avail %d next %d "TENDSTR), -+ dev->nErasedBlocks,dev->nReservedBlocks,blocksAvailable,dev->checkpointNextBlock)); -+ -+ if(dev->checkpointNextBlock >= 0 && -+ dev->checkpointNextBlock <= dev->internalEndBlock && -+ blocksAvailable > 0){ -+ -+ for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){ -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i); -+ if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY){ -+ dev->checkpointNextBlock = i + 1; -+ dev->checkpointCurrentBlock = i; -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("allocating checkpt block %d"TENDSTR),i)); -+ return; -+ } -+ } -+ } -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("out of checkpt blocks"TENDSTR))); -+ -+ dev->checkpointNextBlock = -1; -+ dev->checkpointCurrentBlock = -1; -+} -+ -+static void yaffs_CheckpointFindNextCheckpointBlock(yaffs_Device *dev) -+{ -+ int i; -+ yaffs_ExtendedTags tags; -+ -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: start: blocks %d next %d" TENDSTR), -+ dev->blocksInCheckpoint, dev->checkpointNextBlock)); -+ -+ if(dev->blocksInCheckpoint < dev->checkpointMaxBlocks) -+ for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){ -+ int chunk = i * dev->nChunksPerBlock; -+ int realignedChunk = chunk - dev->chunkOffset; -+ -+ dev->readChunkWithTagsFromNAND(dev,realignedChunk,NULL,&tags); -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR), -+ i, tags.objectId,tags.sequenceNumber,tags.eccResult)); -+ -+ if(tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA){ -+ /* Right kind of block */ -+ dev->checkpointNextBlock = tags.objectId; -+ dev->checkpointCurrentBlock = i; -+ dev->checkpointBlockList[dev->blocksInCheckpoint] = i; -+ dev->blocksInCheckpoint++; -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("found checkpt block %d"TENDSTR),i)); -+ return; -+ } -+ } -+ -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("found no more checkpt blocks"TENDSTR))); -+ -+ dev->checkpointNextBlock = -1; -+ dev->checkpointCurrentBlock = -1; -+} -+ -+ -+int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting) -+{ -+ -+ /* Got the functions we need? */ -+ if (!dev->writeChunkWithTagsToNAND || -+ !dev->readChunkWithTagsFromNAND || -+ !dev->eraseBlockInNAND || -+ !dev->markNANDBlockBad) -+ return 0; -+ -+ if(forWriting && !yaffs_CheckpointSpaceOk(dev)) -+ return 0; -+ -+ if(!dev->checkpointBuffer) -+ dev->checkpointBuffer = YMALLOC_DMA(dev->nDataBytesPerChunk); -+ if(!dev->checkpointBuffer) -+ return 0; -+ -+ -+ dev->checkpointPageSequence = 0; -+ -+ dev->checkpointOpenForWrite = forWriting; -+ -+ dev->checkpointByteCount = 0; -+ dev->checkpointCurrentBlock = -1; -+ dev->checkpointCurrentChunk = -1; -+ dev->checkpointNextBlock = dev->internalStartBlock; -+ -+ /* Erase all the blocks in the checkpoint area */ -+ if(forWriting){ -+ memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk); -+ dev->checkpointByteOffset = 0; -+ return yaffs_CheckpointErase(dev); -+ -+ -+ } else { -+ int i; -+ /* Set to a value that will kick off a read */ -+ dev->checkpointByteOffset = dev->nDataBytesPerChunk; -+ /* A checkpoint block list of 1 checkpoint block per 16 block is (hopefully) -+ * going to be way more than we need */ -+ dev->blocksInCheckpoint = 0; -+ dev->checkpointMaxBlocks = (dev->internalEndBlock - dev->internalStartBlock)/16 + 2; -+ dev->checkpointBlockList = YMALLOC(sizeof(int) * dev->checkpointMaxBlocks); -+ for(i = 0; i < dev->checkpointMaxBlocks; i++) -+ dev->checkpointBlockList[i] = -1; -+ } -+ -+ return 1; -+} -+ -+static int yaffs_CheckpointFlushBuffer(yaffs_Device *dev) -+{ -+ -+ int chunk; -+ int realignedChunk; -+ -+ yaffs_ExtendedTags tags; -+ -+ if(dev->checkpointCurrentBlock < 0){ -+ yaffs_CheckpointFindNextErasedBlock(dev); -+ dev->checkpointCurrentChunk = 0; -+ } -+ -+ if(dev->checkpointCurrentBlock < 0) -+ return 0; -+ -+ tags.chunkDeleted = 0; -+ tags.objectId = dev->checkpointNextBlock; /* Hint to next place to look */ -+ tags.chunkId = dev->checkpointPageSequence + 1; -+ tags.sequenceNumber = YAFFS_SEQUENCE_CHECKPOINT_DATA; -+ tags.byteCount = dev->nDataBytesPerChunk; -+ if(dev->checkpointCurrentChunk == 0){ -+ /* First chunk we write for the block? Set block state to -+ checkpoint */ -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointCurrentBlock); -+ bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT; -+ dev->blocksInCheckpoint++; -+ } -+ -+ chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + dev->checkpointCurrentChunk; -+ -+ -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR), -+ chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk,tags.objectId,tags.chunkId)); -+ -+ realignedChunk = chunk - dev->chunkOffset; -+ -+ dev->writeChunkWithTagsToNAND(dev,realignedChunk,dev->checkpointBuffer,&tags); -+ dev->checkpointByteOffset = 0; -+ dev->checkpointPageSequence++; -+ dev->checkpointCurrentChunk++; -+ if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock){ -+ dev->checkpointCurrentChunk = 0; -+ dev->checkpointCurrentBlock = -1; -+ } -+ memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk); -+ -+ return 1; -+} -+ -+ -+int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes) -+{ -+ int i=0; -+ int ok = 1; -+ -+ -+ __u8 * dataBytes = (__u8 *)data; -+ -+ -+ -+ if(!dev->checkpointBuffer) -+ return 0; -+ -+ while(i < nBytes && ok) { -+ -+ -+ -+ dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes ; -+ dev->checkpointByteOffset++; -+ i++; -+ dataBytes++; -+ dev->checkpointByteCount++; -+ -+ -+ if(dev->checkpointByteOffset < 0 || -+ dev->checkpointByteOffset >= dev->nDataBytesPerChunk) -+ ok = yaffs_CheckpointFlushBuffer(dev); -+ -+ } -+ -+ return i; -+} -+ -+int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes) -+{ -+ int i=0; -+ int ok = 1; -+ yaffs_ExtendedTags tags; -+ -+ -+ int chunk; -+ int realignedChunk; -+ -+ __u8 *dataBytes = (__u8 *)data; -+ -+ if(!dev->checkpointBuffer) -+ return 0; -+ -+ while(i < nBytes && ok) { -+ -+ -+ if(dev->checkpointByteOffset < 0 || -+ dev->checkpointByteOffset >= dev->nDataBytesPerChunk) { -+ -+ if(dev->checkpointCurrentBlock < 0){ -+ yaffs_CheckpointFindNextCheckpointBlock(dev); -+ dev->checkpointCurrentChunk = 0; -+ } -+ -+ if(dev->checkpointCurrentBlock < 0) -+ ok = 0; -+ else { -+ -+ chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + -+ dev->checkpointCurrentChunk; -+ -+ realignedChunk = chunk - dev->chunkOffset; -+ -+ /* read in the next chunk */ -+ /* printf("read checkpoint page %d\n",dev->checkpointPage); */ -+ dev->readChunkWithTagsFromNAND(dev, realignedChunk, -+ dev->checkpointBuffer, -+ &tags); -+ -+ if(tags.chunkId != (dev->checkpointPageSequence + 1) || -+ tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA) -+ ok = 0; -+ -+ dev->checkpointByteOffset = 0; -+ dev->checkpointPageSequence++; -+ dev->checkpointCurrentChunk++; -+ -+ if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock) -+ dev->checkpointCurrentBlock = -1; -+ } -+ } -+ -+ if(ok){ -+ *dataBytes = dev->checkpointBuffer[dev->checkpointByteOffset]; -+ dev->checkpointByteOffset++; -+ i++; -+ dataBytes++; -+ dev->checkpointByteCount++; -+ } -+ } -+ -+ return i; -+} -+ -+int yaffs_CheckpointClose(yaffs_Device *dev) -+{ -+ -+ if(dev->checkpointOpenForWrite){ -+ if(dev->checkpointByteOffset != 0) -+ yaffs_CheckpointFlushBuffer(dev); -+ } else { -+ int i; -+ for(i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++){ -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointBlockList[i]); -+ if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY) -+ bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT; -+ else { -+ // Todo this looks odd... -+ } -+ } -+ YFREE(dev->checkpointBlockList); -+ dev->checkpointBlockList = NULL; -+ } -+ -+ dev->nFreeChunks -= dev->blocksInCheckpoint * dev->nChunksPerBlock; -+ dev->nErasedBlocks -= dev->blocksInCheckpoint; -+ -+ -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint byte count %d" TENDSTR), -+ dev->checkpointByteCount)); -+ -+ if(dev->checkpointBuffer){ -+ /* free the buffer */ -+ YFREE(dev->checkpointBuffer); -+ dev->checkpointBuffer = NULL; -+ return 1; -+ } -+ else -+ return 0; -+ -+} -+ -+int yaffs_CheckpointInvalidateStream(yaffs_Device *dev) -+{ -+ /* Erase the first checksum block */ -+ -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint invalidate"TENDSTR))); -+ -+ if(!yaffs_CheckpointSpaceOk(dev)) -+ return 0; -+ -+ return yaffs_CheckpointErase(dev); -+} -+ -+ -+ -diff -urN linux.old/fs/yaffs2/yaffs_checkptrw.h linux.dev/fs/yaffs2/yaffs_checkptrw.h ---- linux.old/fs/yaffs2/yaffs_checkptrw.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_checkptrw.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,18 @@ -+#ifndef __YAFFS_CHECKPTRW_H__ -+#define __YAFFS_CHECKPTRW_H__ -+ -+#include "yaffs_guts.h" -+ -+int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting); -+ -+int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes); -+ -+int yaffs_CheckpointRead(yaffs_Device *dev,void *data, int nBytes); -+ -+int yaffs_CheckpointClose(yaffs_Device *dev); -+ -+int yaffs_CheckpointInvalidateStream(yaffs_Device *dev); -+ -+ -+#endif -+ -diff -urN linux.old/fs/yaffs2/yaffs_ecc.c linux.dev/fs/yaffs2/yaffs_ecc.c ---- linux.old/fs/yaffs2/yaffs_ecc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_ecc.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,333 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * yaffs_ecc.c: ECC generation/correction algorithms. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * -+ * Created by Charles Manning -+ * -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU Lesser General Public License -+ * version 2.1 as published by the Free Software Foundation. -+ */ -+ -+ /* -+ * This code implements the ECC algorithm used in SmartMedia. -+ * -+ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes. -+ * The two unused bit are set to 1. -+ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC -+ * blocks are used on a 512-byte NAND page. -+ * -+ */ -+ -+/* Table generated by gen-ecc.c -+ * Using a table means we do not have to calculate p1..p4 and p1'..p4' -+ * for each byte of data. These are instead provided in a table in bits7..2. -+ * Bit 0 of each entry indicates whether the entry has an odd or even parity, and therefore -+ * this bytes influence on the line parity. -+ */ -+ -+const char *yaffs_ecc_c_version = -+ "$Id: yaffs_ecc.c,v 1.7 2006/09/14 22:02:46 charles Exp $"; -+ -+#include "yportenv.h" -+ -+#include "yaffs_ecc.h" -+ -+static const unsigned char column_parity_table[] = { -+ 0x00, 0x55, 0x59, 0x0c, 0x65, 0x30, 0x3c, 0x69, -+ 0x69, 0x3c, 0x30, 0x65, 0x0c, 0x59, 0x55, 0x00, -+ 0x95, 0xc0, 0xcc, 0x99, 0xf0, 0xa5, 0xa9, 0xfc, -+ 0xfc, 0xa9, 0xa5, 0xf0, 0x99, 0xcc, 0xc0, 0x95, -+ 0x99, 0xcc, 0xc0, 0x95, 0xfc, 0xa9, 0xa5, 0xf0, -+ 0xf0, 0xa5, 0xa9, 0xfc, 0x95, 0xc0, 0xcc, 0x99, -+ 0x0c, 0x59, 0x55, 0x00, 0x69, 0x3c, 0x30, 0x65, -+ 0x65, 0x30, 0x3c, 0x69, 0x00, 0x55, 0x59, 0x0c, -+ 0xa5, 0xf0, 0xfc, 0xa9, 0xc0, 0x95, 0x99, 0xcc, -+ 0xcc, 0x99, 0x95, 0xc0, 0xa9, 0xfc, 0xf0, 0xa5, -+ 0x30, 0x65, 0x69, 0x3c, 0x55, 0x00, 0x0c, 0x59, -+ 0x59, 0x0c, 0x00, 0x55, 0x3c, 0x69, 0x65, 0x30, -+ 0x3c, 0x69, 0x65, 0x30, 0x59, 0x0c, 0x00, 0x55, -+ 0x55, 0x00, 0x0c, 0x59, 0x30, 0x65, 0x69, 0x3c, -+ 0xa9, 0xfc, 0xf0, 0xa5, 0xcc, 0x99, 0x95, 0xc0, -+ 0xc0, 0x95, 0x99, 0xcc, 0xa5, 0xf0, 0xfc, 0xa9, -+ 0xa9, 0xfc, 0xf0, 0xa5, 0xcc, 0x99, 0x95, 0xc0, -+ 0xc0, 0x95, 0x99, 0xcc, 0xa5, 0xf0, 0xfc, 0xa9, -+ 0x3c, 0x69, 0x65, 0x30, 0x59, 0x0c, 0x00, 0x55, -+ 0x55, 0x00, 0x0c, 0x59, 0x30, 0x65, 0x69, 0x3c, -+ 0x30, 0x65, 0x69, 0x3c, 0x55, 0x00, 0x0c, 0x59, -+ 0x59, 0x0c, 0x00, 0x55, 0x3c, 0x69, 0x65, 0x30, -+ 0xa5, 0xf0, 0xfc, 0xa9, 0xc0, 0x95, 0x99, 0xcc, -+ 0xcc, 0x99, 0x95, 0xc0, 0xa9, 0xfc, 0xf0, 0xa5, -+ 0x0c, 0x59, 0x55, 0x00, 0x69, 0x3c, 0x30, 0x65, -+ 0x65, 0x30, 0x3c, 0x69, 0x00, 0x55, 0x59, 0x0c, -+ 0x99, 0xcc, 0xc0, 0x95, 0xfc, 0xa9, 0xa5, 0xf0, -+ 0xf0, 0xa5, 0xa9, 0xfc, 0x95, 0xc0, 0xcc, 0x99, -+ 0x95, 0xc0, 0xcc, 0x99, 0xf0, 0xa5, 0xa9, 0xfc, -+ 0xfc, 0xa9, 0xa5, 0xf0, 0x99, 0xcc, 0xc0, 0x95, -+ 0x00, 0x55, 0x59, 0x0c, 0x65, 0x30, 0x3c, 0x69, -+ 0x69, 0x3c, 0x30, 0x65, 0x0c, 0x59, 0x55, 0x00, -+}; -+ -+/* Count the bits in an unsigned char or a U32 */ -+ -+static int yaffs_CountBits(unsigned char x) -+{ -+ int r = 0; -+ while (x) { -+ if (x & 1) -+ r++; -+ x >>= 1; -+ } -+ return r; -+} -+ -+static int yaffs_CountBits32(unsigned x) -+{ -+ int r = 0; -+ while (x) { -+ if (x & 1) -+ r++; -+ x >>= 1; -+ } -+ return r; -+} -+ -+/* Calculate the ECC for a 256-byte block of data */ -+void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc) -+{ -+ unsigned int i; -+ -+ unsigned char col_parity = 0; -+ unsigned char line_parity = 0; -+ unsigned char line_parity_prime = 0; -+ unsigned char t; -+ unsigned char b; -+ -+ for (i = 0; i < 256; i++) { -+ b = column_parity_table[*data++]; -+ col_parity ^= b; -+ -+ if (b & 0x01) // odd number of bits in the byte -+ { -+ line_parity ^= i; -+ line_parity_prime ^= ~i; -+ } -+ -+ } -+ -+ ecc[2] = (~col_parity) | 0x03; -+ -+ t = 0; -+ if (line_parity & 0x80) -+ t |= 0x80; -+ if (line_parity_prime & 0x80) -+ t |= 0x40; -+ if (line_parity & 0x40) -+ t |= 0x20; -+ if (line_parity_prime & 0x40) -+ t |= 0x10; -+ if (line_parity & 0x20) -+ t |= 0x08; -+ if (line_parity_prime & 0x20) -+ t |= 0x04; -+ if (line_parity & 0x10) -+ t |= 0x02; -+ if (line_parity_prime & 0x10) -+ t |= 0x01; -+ ecc[1] = ~t; -+ -+ t = 0; -+ if (line_parity & 0x08) -+ t |= 0x80; -+ if (line_parity_prime & 0x08) -+ t |= 0x40; -+ if (line_parity & 0x04) -+ t |= 0x20; -+ if (line_parity_prime & 0x04) -+ t |= 0x10; -+ if (line_parity & 0x02) -+ t |= 0x08; -+ if (line_parity_prime & 0x02) -+ t |= 0x04; -+ if (line_parity & 0x01) -+ t |= 0x02; -+ if (line_parity_prime & 0x01) -+ t |= 0x01; -+ ecc[0] = ~t; -+ -+#ifdef CONFIG_YAFFS_ECC_WRONG_ORDER -+ // Swap the bytes into the wrong order -+ t = ecc[0]; -+ ecc[0] = ecc[1]; -+ ecc[1] = t; -+#endif -+} -+ -+ -+/* Correct the ECC on a 256 byte block of data */ -+ -+int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc, -+ const unsigned char *test_ecc) -+{ -+ unsigned char d0, d1, d2; /* deltas */ -+ -+ d0 = read_ecc[0] ^ test_ecc[0]; -+ d1 = read_ecc[1] ^ test_ecc[1]; -+ d2 = read_ecc[2] ^ test_ecc[2]; -+ -+ if ((d0 | d1 | d2) == 0) -+ return 0; /* no error */ -+ -+ if (((d0 ^ (d0 >> 1)) & 0x55) == 0x55 && -+ ((d1 ^ (d1 >> 1)) & 0x55) == 0x55 && -+ ((d2 ^ (d2 >> 1)) & 0x54) == 0x54) { -+ /* Single bit (recoverable) error in data */ -+ -+ unsigned byte; -+ unsigned bit; -+ -+#ifdef CONFIG_YAFFS_ECC_WRONG_ORDER -+ // swap the bytes to correct for the wrong order -+ unsigned char t; -+ -+ t = d0; -+ d0 = d1; -+ d1 = t; -+#endif -+ -+ bit = byte = 0; -+ -+ if (d1 & 0x80) -+ byte |= 0x80; -+ if (d1 & 0x20) -+ byte |= 0x40; -+ if (d1 & 0x08) -+ byte |= 0x20; -+ if (d1 & 0x02) -+ byte |= 0x10; -+ if (d0 & 0x80) -+ byte |= 0x08; -+ if (d0 & 0x20) -+ byte |= 0x04; -+ if (d0 & 0x08) -+ byte |= 0x02; -+ if (d0 & 0x02) -+ byte |= 0x01; -+ -+ if (d2 & 0x80) -+ bit |= 0x04; -+ if (d2 & 0x20) -+ bit |= 0x02; -+ if (d2 & 0x08) -+ bit |= 0x01; -+ -+ data[byte] ^= (1 << bit); -+ -+ return 1; /* Corrected the error */ -+ } -+ -+ if ((yaffs_CountBits(d0) + -+ yaffs_CountBits(d1) + -+ yaffs_CountBits(d2)) == 1) { -+ /* Reccoverable error in ecc */ -+ -+ read_ecc[0] = test_ecc[0]; -+ read_ecc[1] = test_ecc[1]; -+ read_ecc[2] = test_ecc[2]; -+ -+ return 1; /* Corrected the error */ -+ } -+ -+ /* Unrecoverable error */ -+ -+ return -1; -+ -+} -+ -+ -+/* -+ * ECCxxxOther does ECC calcs on arbitrary n bytes of data -+ */ -+void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes, -+ yaffs_ECCOther * eccOther) -+{ -+ unsigned int i; -+ -+ unsigned char col_parity = 0; -+ unsigned line_parity = 0; -+ unsigned line_parity_prime = 0; -+ unsigned char b; -+ -+ for (i = 0; i < nBytes; i++) { -+ b = column_parity_table[*data++]; -+ col_parity ^= b; -+ -+ if (b & 0x01) { -+ /* odd number of bits in the byte */ -+ line_parity ^= i; -+ line_parity_prime ^= ~i; -+ } -+ -+ } -+ -+ eccOther->colParity = (col_parity >> 2) & 0x3f; -+ eccOther->lineParity = line_parity; -+ eccOther->lineParityPrime = line_parity_prime; -+} -+ -+int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes, -+ yaffs_ECCOther * read_ecc, -+ const yaffs_ECCOther * test_ecc) -+{ -+ unsigned char cDelta; /* column parity delta */ -+ unsigned lDelta; /* line parity delta */ -+ unsigned lDeltaPrime; /* line parity delta */ -+ unsigned bit; -+ -+ cDelta = read_ecc->colParity ^ test_ecc->colParity; -+ lDelta = read_ecc->lineParity ^ test_ecc->lineParity; -+ lDeltaPrime = read_ecc->lineParityPrime ^ test_ecc->lineParityPrime; -+ -+ if ((cDelta | lDelta | lDeltaPrime) == 0) -+ return 0; /* no error */ -+ -+ if (lDelta == ~lDeltaPrime && -+ (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15)) -+ { -+ /* Single bit (recoverable) error in data */ -+ -+ bit = 0; -+ -+ if (cDelta & 0x20) -+ bit |= 0x04; -+ if (cDelta & 0x08) -+ bit |= 0x02; -+ if (cDelta & 0x02) -+ bit |= 0x01; -+ -+ if(lDelta >= nBytes) -+ return -1; -+ -+ data[lDelta] ^= (1 << bit); -+ -+ return 1; /* corrected */ -+ } -+ -+ if ((yaffs_CountBits32(lDelta) + yaffs_CountBits32(lDeltaPrime) + -+ yaffs_CountBits(cDelta)) == 1) { -+ /* Reccoverable error in ecc */ -+ -+ *read_ecc = *test_ecc; -+ return 1; /* corrected */ -+ } -+ -+ /* Unrecoverable error */ -+ -+ return -1; -+ -+} -+ -diff -urN linux.old/fs/yaffs2/yaffs_ecc.h linux.dev/fs/yaffs2/yaffs_ecc.h ---- linux.old/fs/yaffs2/yaffs_ecc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_ecc.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,44 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * yaffs_ecc.c: ECC generation/correction algorithms. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+ /* -+ * This code implements the ECC algorithm used in SmartMedia. -+ * -+ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes. -+ * The two unused bit are set to 1. -+ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC -+ * blocks are used on a 512-byte NAND page. -+ * -+ */ -+ -+#ifndef __YAFFS_ECC_H__ -+#define __YAFFS_ECC_H__ -+ -+typedef struct { -+ unsigned char colParity; -+ unsigned lineParity; -+ unsigned lineParityPrime; -+} yaffs_ECCOther; -+ -+void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc); -+int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc, -+ const unsigned char *test_ecc); -+ -+void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes, -+ yaffs_ECCOther * ecc); -+int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes, -+ yaffs_ECCOther * read_ecc, -+ const yaffs_ECCOther * test_ecc); -+#endif -diff -urN linux.old/fs/yaffs2/yaffs_fs.c linux.dev/fs/yaffs2/yaffs_fs.c ---- linux.old/fs/yaffs2/yaffs_fs.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_fs.c 2006-12-14 04:33:02.000000000 +0100 -@@ -0,0 +1,2136 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffs_fs.c -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This is the file system front-end to YAFFS that hooks it up to -+ * the VFS. -+ * -+ * Special notes: -+ * >> 2.4: sb->u.generic_sbp points to the yaffs_Device associated with -+ * this superblock -+ * >> 2.6: sb->s_fs_info points to the yaffs_Device associated with this -+ * superblock -+ * >> inode->u.generic_ip points to the associated yaffs_Object. -+ * -+ * Acknowledgements: -+ * * Luc van OostenRyck for numerous patches. -+ * * Nick Bane for numerous patches. -+ * * Nick Bane for 2.5/2.6 integration. -+ * * Andras Toth for mknod rdev issue. -+ * * Michael Fischer for finding the problem with inode inconsistency. -+ * * Some code bodily lifted from JFFS2. -+ */ -+ -+const char *yaffs_fs_c_version = -+ "$Id: yaffs_fs.c,v 1.54 2006/10/24 18:09:15 charles Exp $"; -+extern const char *yaffs_guts_c_version; -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+ -+#include /* Added NCB 15-8-2003 */ -+#include -+#define UnlockPage(p) unlock_page(p) -+#define Page_Uptodate(page) test_bit(PG_uptodate, &(page)->flags) -+ -+/* FIXME: use sb->s_id instead ? */ -+#define yaffs_devname(sb, buf) bdevname(sb->s_bdev, buf) -+ -+#else -+ -+#include -+#define BDEVNAME_SIZE 0 -+#define yaffs_devname(sb, buf) kdevname(sb->s_dev) -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) -+/* added NCB 26/5/2006 for 2.4.25-vrs2-tcl1 kernel */ -+#define __user -+#endif -+ -+#endif -+ -+#include -+ -+#include "yportenv.h" -+#include "yaffs_guts.h" -+ -+unsigned yaffs_traceMask = YAFFS_TRACE_ALWAYS | -+ YAFFS_TRACE_BAD_BLOCKS -+ /* | 0xFFFFFFFF */; -+ -+#include -+#include "yaffs_mtdif.h" -+#include "yaffs_mtdif2.h" -+ -+/*#define T(x) printk x */ -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)) -+#define yaffs_InodeToObject(iptr) ((yaffs_Object *)((iptr)->i_private)) -+#else -+#define yaffs_InodeToObject(iptr) ((yaffs_Object *)((iptr)->u.generic_ip)) -+#endif -+#define yaffs_DentryToObject(dptr) yaffs_InodeToObject((dptr)->d_inode) -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+#define yaffs_SuperToDevice(sb) ((yaffs_Device *)sb->s_fs_info) -+#else -+#define yaffs_SuperToDevice(sb) ((yaffs_Device *)sb->u.generic_sbp) -+#endif -+ -+static void yaffs_put_super(struct super_block *sb); -+ -+static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n, -+ loff_t * pos); -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static int yaffs_file_flush(struct file *file, fl_owner_t id); -+#else -+static int yaffs_file_flush(struct file *file); -+#endif -+ -+static int yaffs_sync_object(struct file *file, struct dentry *dentry, -+ int datasync); -+ -+static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir); -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode, -+ struct nameidata *n); -+static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry, -+ struct nameidata *n); -+#else -+static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode); -+static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry); -+#endif -+static int yaffs_link(struct dentry *old_dentry, struct inode *dir, -+ struct dentry *dentry); -+static int yaffs_unlink(struct inode *dir, struct dentry *dentry); -+static int yaffs_symlink(struct inode *dir, struct dentry *dentry, -+ const char *symname); -+static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode); -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode, -+ dev_t dev); -+#else -+static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode, -+ int dev); -+#endif -+static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry, -+ struct inode *new_dir, struct dentry *new_dentry); -+static int yaffs_setattr(struct dentry *dentry, struct iattr *attr); -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static int yaffs_sync_fs(struct super_block *sb, int wait); -+static void yaffs_write_super(struct super_block *sb); -+#else -+static int yaffs_sync_fs(struct super_block *sb); -+static int yaffs_write_super(struct super_block *sb); -+#endif -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf); -+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf); -+#else -+static int yaffs_statfs(struct super_block *sb, struct statfs *buf); -+#endif -+static void yaffs_read_inode(struct inode *inode); -+ -+static void yaffs_put_inode(struct inode *inode); -+static void yaffs_delete_inode(struct inode *); -+static void yaffs_clear_inode(struct inode *); -+ -+static int yaffs_readpage(struct file *file, struct page *page); -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs_writepage(struct page *page, struct writeback_control *wbc); -+#else -+static int yaffs_writepage(struct page *page); -+#endif -+static int yaffs_prepare_write(struct file *f, struct page *pg, -+ unsigned offset, unsigned to); -+static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset, -+ unsigned to); -+ -+static int yaffs_readlink(struct dentry *dentry, char __user * buffer, -+ int buflen); -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13)) -+static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd); -+#else -+static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd); -+#endif -+ -+static struct address_space_operations yaffs_file_address_operations = { -+ .readpage = yaffs_readpage, -+ .writepage = yaffs_writepage, -+ .prepare_write = yaffs_prepare_write, -+ .commit_write = yaffs_commit_write, -+}; -+ -+static struct file_operations yaffs_file_operations = { -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)) -+ .read = do_sync_read, -+ .write = do_sync_write, -+ .aio_read = generic_file_aio_read, -+ .aio_write = generic_file_aio_write, -+#else -+ .read = generic_file_read, -+ .write = generic_file_write, -+#endif -+ .mmap = generic_file_mmap, -+ .flush = yaffs_file_flush, -+ .fsync = yaffs_sync_object, -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+ .sendfile = generic_file_sendfile, -+#endif -+ -+}; -+ -+static struct inode_operations yaffs_file_inode_operations = { -+ .setattr = yaffs_setattr, -+}; -+ -+static struct inode_operations yaffs_symlink_inode_operations = { -+ .readlink = yaffs_readlink, -+ .follow_link = yaffs_follow_link, -+ .setattr = yaffs_setattr, -+}; -+ -+static struct inode_operations yaffs_dir_inode_operations = { -+ .create = yaffs_create, -+ .lookup = yaffs_lookup, -+ .link = yaffs_link, -+ .unlink = yaffs_unlink, -+ .symlink = yaffs_symlink, -+ .mkdir = yaffs_mkdir, -+ .rmdir = yaffs_unlink, -+ .mknod = yaffs_mknod, -+ .rename = yaffs_rename, -+ .setattr = yaffs_setattr, -+}; -+ -+static struct file_operations yaffs_dir_operations = { -+ .read = generic_read_dir, -+ .readdir = yaffs_readdir, -+ .fsync = yaffs_sync_object, -+}; -+ -+static struct super_operations yaffs_super_ops = { -+ .statfs = yaffs_statfs, -+ .read_inode = yaffs_read_inode, -+ .put_inode = yaffs_put_inode, -+ .put_super = yaffs_put_super, -+ .delete_inode = yaffs_delete_inode, -+ .clear_inode = yaffs_clear_inode, -+ .sync_fs = yaffs_sync_fs, -+ .write_super = yaffs_write_super, -+}; -+ -+static void yaffs_GrossLock(yaffs_Device * dev) -+{ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs locking\n")); -+ -+ down(&dev->grossLock); -+} -+ -+static void yaffs_GrossUnlock(yaffs_Device * dev) -+{ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs unlocking\n")); -+ up(&dev->grossLock); -+ -+} -+ -+static int yaffs_readlink(struct dentry *dentry, char __user * buffer, -+ int buflen) -+{ -+ unsigned char *alias; -+ int ret; -+ -+ yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev; -+ -+ yaffs_GrossLock(dev); -+ -+ alias = yaffs_GetSymlinkAlias(yaffs_DentryToObject(dentry)); -+ -+ yaffs_GrossUnlock(dev); -+ -+ if (!alias) -+ return -ENOMEM; -+ -+ ret = vfs_readlink(dentry, buffer, buflen, alias); -+ kfree(alias); -+ return ret; -+} -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13)) -+static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd) -+#else -+static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd) -+#endif -+{ -+ unsigned char *alias; -+ int ret; -+ yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev; -+ -+ yaffs_GrossLock(dev); -+ -+ alias = yaffs_GetSymlinkAlias(yaffs_DentryToObject(dentry)); -+ -+ yaffs_GrossUnlock(dev); -+ -+ if (!alias) -+ { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ ret = vfs_follow_link(nd, alias); -+ kfree(alias); -+out: -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13)) -+ return ERR_PTR (ret); -+#else -+ return ret; -+#endif -+} -+ -+struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev, -+ yaffs_Object * obj); -+ -+/* -+ * Lookup is used to find objects in the fs -+ */ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+ -+static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry, -+ struct nameidata *n) -+#else -+static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry) -+#endif -+{ -+ yaffs_Object *obj; -+ struct inode *inode = NULL; /* NCB 2.5/2.6 needs NULL here */ -+ -+ yaffs_Device *dev = yaffs_InodeToObject(dir)->myDev; -+ -+ yaffs_GrossLock(dev); -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_lookup for %d:%s\n", -+ yaffs_InodeToObject(dir)->objectId, dentry->d_name.name)); -+ -+ obj = -+ yaffs_FindObjectByName(yaffs_InodeToObject(dir), -+ dentry->d_name.name); -+ -+ obj = yaffs_GetEquivalentObject(obj); /* in case it was a hardlink */ -+ -+ /* Can't hold gross lock when calling yaffs_get_inode() */ -+ yaffs_GrossUnlock(dev); -+ -+ if (obj) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_lookup found %d\n", obj->objectId)); -+ -+ inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj); -+ -+ if (inode) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_loookup dentry \n")); -+/* #if 0 asserted by NCB for 2.5/6 compatability - falls through to -+ * d_add even if NULL inode */ -+#if 0 -+ /*dget(dentry); // try to solve directory bug */ -+ d_add(dentry, inode); -+ -+ /* return dentry; */ -+ return NULL; -+#endif -+ } -+ -+ } else { -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_lookup not found\n")); -+ -+ } -+ -+/* added NCB for 2.5/6 compatability - forces add even if inode is -+ * NULL which creates dentry hash */ -+ d_add(dentry, inode); -+ -+ return NULL; -+ /* return (ERR_PTR(-EIO)); */ -+ -+} -+ -+/* For now put inode is just for debugging -+ * Put inode is called when the inode **structure** is put. -+ */ -+static void yaffs_put_inode(struct inode *inode) -+{ -+ T(YAFFS_TRACE_OS, -+ ("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino, -+ atomic_read(&inode->i_count))); -+ -+} -+ -+/* clear is called to tell the fs to release any per-inode data it holds */ -+static void yaffs_clear_inode(struct inode *inode) -+{ -+ yaffs_Object *obj; -+ yaffs_Device *dev; -+ -+ obj = yaffs_InodeToObject(inode); -+ -+ T(YAFFS_TRACE_OS, -+ ("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino, -+ atomic_read(&inode->i_count), -+ obj ? "object exists" : "null object")); -+ -+ if (obj) { -+ dev = obj->myDev; -+ yaffs_GrossLock(dev); -+ -+ /* Clear the association between the inode and -+ * the yaffs_Object. -+ */ -+ obj->myInode = NULL; -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)) -+ inode->i_private = NULL; -+#else -+ inode->u.generic_ip = NULL; -+#endif -+ -+ /* If the object freeing was deferred, then the real -+ * free happens now. -+ * This should fix the inode inconsistency problem. -+ */ -+ -+ yaffs_HandleDeferedFree(obj); -+ -+ yaffs_GrossUnlock(dev); -+ } -+ -+} -+ -+/* delete is called when the link count is zero and the inode -+ * is put (ie. nobody wants to know about it anymore, time to -+ * delete the file). -+ * NB Must call clear_inode() -+ */ -+static void yaffs_delete_inode(struct inode *inode) -+{ -+ yaffs_Object *obj = yaffs_InodeToObject(inode); -+ yaffs_Device *dev; -+ -+ T(YAFFS_TRACE_OS, -+ ("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino, -+ atomic_read(&inode->i_count), -+ obj ? "object exists" : "null object")); -+ -+ if (obj) { -+ dev = obj->myDev; -+ yaffs_GrossLock(dev); -+ yaffs_DeleteFile(obj); -+ yaffs_GrossUnlock(dev); -+ } -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13)) -+ truncate_inode_pages (&inode->i_data, 0); -+#endif -+ clear_inode(inode); -+} -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static int yaffs_file_flush(struct file *file, fl_owner_t id) -+#else -+static int yaffs_file_flush(struct file *file) -+#endif -+{ -+ yaffs_Object *obj = yaffs_DentryToObject(file->f_dentry); -+ -+ yaffs_Device *dev = obj->myDev; -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_file_flush object %d (%s)\n", obj->objectId, -+ obj->dirty ? "dirty" : "clean")); -+ -+ yaffs_GrossLock(dev); -+ -+ yaffs_FlushFile(obj, 1); -+ -+ yaffs_GrossUnlock(dev); -+ -+ return 0; -+} -+ -+static int yaffs_readpage_nolock(struct file *f, struct page *pg) -+{ -+ /* Lifted from jffs2 */ -+ -+ yaffs_Object *obj; -+ unsigned char *pg_buf; -+ int ret; -+ -+ yaffs_Device *dev; -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage at %08x, size %08x\n", -+ (unsigned)(pg->index << PAGE_CACHE_SHIFT), -+ (unsigned)PAGE_CACHE_SIZE)); -+ -+ obj = yaffs_DentryToObject(f->f_dentry); -+ -+ dev = obj->myDev; -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+ BUG_ON(!PageLocked(pg)); -+#else -+ if (!PageLocked(pg)) -+ PAGE_BUG(pg); -+#endif -+ -+ pg_buf = kmap(pg); -+ /* FIXME: Can kmap fail? */ -+ -+ yaffs_GrossLock(dev); -+ -+ ret = -+ yaffs_ReadDataFromFile(obj, pg_buf, pg->index << PAGE_CACHE_SHIFT, -+ PAGE_CACHE_SIZE); -+ -+ yaffs_GrossUnlock(dev); -+ -+ if (ret >= 0) -+ ret = 0; -+ -+ if (ret) { -+ ClearPageUptodate(pg); -+ SetPageError(pg); -+ } else { -+ SetPageUptodate(pg); -+ ClearPageError(pg); -+ } -+ -+ flush_dcache_page(pg); -+ kunmap(pg); -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage done\n")); -+ return ret; -+} -+ -+static int yaffs_readpage_unlock(struct file *f, struct page *pg) -+{ -+ int ret = yaffs_readpage_nolock(f, pg); -+ UnlockPage(pg); -+ return ret; -+} -+ -+static int yaffs_readpage(struct file *f, struct page *pg) -+{ -+ return yaffs_readpage_unlock(f, pg); -+} -+ -+/* writepage inspired by/stolen from smbfs */ -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs_writepage(struct page *page, struct writeback_control *wbc) -+#else -+static int yaffs_writepage(struct page *page) -+#endif -+{ -+ struct address_space *mapping = page->mapping; -+ loff_t offset = (loff_t) page->index << PAGE_CACHE_SHIFT; -+ struct inode *inode; -+ unsigned long end_index; -+ char *buffer; -+ yaffs_Object *obj; -+ int nWritten = 0; -+ unsigned nBytes; -+ -+ if (!mapping) -+ BUG(); -+ inode = mapping->host; -+ if (!inode) -+ BUG(); -+ -+ if (offset > inode->i_size) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG -+ "yaffs_writepage at %08x, inode size = %08x!!!\n", -+ (unsigned)(page->index << PAGE_CACHE_SHIFT), -+ (unsigned)inode->i_size)); -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG " -> don't care!!\n")); -+ unlock_page(page); -+ return 0; -+ } -+ -+ end_index = inode->i_size >> PAGE_CACHE_SHIFT; -+ -+ /* easy case */ -+ if (page->index < end_index) { -+ nBytes = PAGE_CACHE_SIZE; -+ } else { -+ nBytes = inode->i_size & (PAGE_CACHE_SIZE - 1); -+ } -+ -+ get_page(page); -+ -+ buffer = kmap(page); -+ -+ obj = yaffs_InodeToObject(inode); -+ yaffs_GrossLock(obj->myDev); -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_writepage at %08x, size %08x\n", -+ (unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes)); -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "writepag0: obj = %05x, ino = %05x\n", -+ (int)obj->variant.fileVariant.fileSize, (int)inode->i_size)); -+ -+ nWritten = -+ yaffs_WriteDataToFile(obj, buffer, page->index << PAGE_CACHE_SHIFT, -+ nBytes, 0); -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "writepag1: obj = %05x, ino = %05x\n", -+ (int)obj->variant.fileVariant.fileSize, (int)inode->i_size)); -+ -+ yaffs_GrossUnlock(obj->myDev); -+ -+ kunmap(page); -+ SetPageUptodate(page); -+ UnlockPage(page); -+ put_page(page); -+ -+ return (nWritten == nBytes) ? 0 : -ENOSPC; -+} -+ -+static int yaffs_prepare_write(struct file *f, struct page *pg, -+ unsigned offset, unsigned to) -+{ -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_prepair_write\n")); -+ if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE)) -+ return yaffs_readpage_nolock(f, pg); -+ -+ return 0; -+ -+} -+ -+static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset, -+ unsigned to) -+{ -+ -+ void *addr = page_address(pg) + offset; -+ loff_t pos = (((loff_t) pg->index) << PAGE_CACHE_SHIFT) + offset; -+ int nBytes = to - offset; -+ int nWritten; -+ -+ unsigned spos = pos; -+ unsigned saddr = (unsigned)addr; -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_commit_write addr %x pos %x nBytes %d\n", saddr, -+ spos, nBytes)); -+ -+ nWritten = yaffs_file_write(f, addr, nBytes, &pos); -+ -+ if (nWritten != nBytes) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG -+ "yaffs_commit_write not same size nWritten %d nBytes %d\n", -+ nWritten, nBytes)); -+ SetPageError(pg); -+ ClearPageUptodate(pg); -+ } else { -+ SetPageUptodate(pg); -+ } -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_commit_write returning %d\n", -+ nWritten == nBytes ? 0 : nWritten)); -+ -+ return nWritten == nBytes ? 0 : nWritten; -+ -+} -+ -+static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object * obj) -+{ -+ if (inode && obj) { -+ -+ -+ /* Check mode against the variant type and attempt to repair if broken. */ -+ __u32 mode = obj->yst_mode; -+ switch( obj->variantType ){ -+ case YAFFS_OBJECT_TYPE_FILE : -+ if( ! S_ISREG(mode) ){ -+ obj->yst_mode &= ~S_IFMT; -+ obj->yst_mode |= S_IFREG; -+ } -+ -+ break; -+ case YAFFS_OBJECT_TYPE_SYMLINK : -+ if( ! S_ISLNK(mode) ){ -+ obj->yst_mode &= ~S_IFMT; -+ obj->yst_mode |= S_IFLNK; -+ } -+ -+ break; -+ case YAFFS_OBJECT_TYPE_DIRECTORY : -+ if( ! S_ISDIR(mode) ){ -+ obj->yst_mode &= ~S_IFMT; -+ obj->yst_mode |= S_IFDIR; -+ } -+ -+ break; -+ case YAFFS_OBJECT_TYPE_UNKNOWN : -+ case YAFFS_OBJECT_TYPE_HARDLINK : -+ case YAFFS_OBJECT_TYPE_SPECIAL : -+ default: -+ /* TODO? */ -+ break; -+ } -+ -+ inode->i_ino = obj->objectId; -+ inode->i_mode = obj->yst_mode; -+ inode->i_uid = obj->yst_uid; -+ inode->i_gid = obj->yst_gid; -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) -+ inode->i_blksize = inode->i_sb->s_blocksize; -+#endif -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+ -+ inode->i_rdev = old_decode_dev(obj->yst_rdev); -+ inode->i_atime.tv_sec = (time_t) (obj->yst_atime); -+ inode->i_atime.tv_nsec = 0; -+ inode->i_mtime.tv_sec = (time_t) obj->yst_mtime; -+ inode->i_mtime.tv_nsec = 0; -+ inode->i_ctime.tv_sec = (time_t) obj->yst_ctime; -+ inode->i_ctime.tv_nsec = 0; -+#else -+ inode->i_rdev = obj->yst_rdev; -+ inode->i_atime = obj->yst_atime; -+ inode->i_mtime = obj->yst_mtime; -+ inode->i_ctime = obj->yst_ctime; -+#endif -+ inode->i_size = yaffs_GetObjectFileLength(obj); -+ inode->i_blocks = (inode->i_size + 511) >> 9; -+ -+ inode->i_nlink = yaffs_GetObjectLinkCount(obj); -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG -+ "yaffs_FillInode mode %x uid %d gid %d size %d count %d\n", -+ inode->i_mode, inode->i_uid, inode->i_gid, -+ (int)inode->i_size, atomic_read(&inode->i_count))); -+ -+ switch (obj->yst_mode & S_IFMT) { -+ default: /* fifo, device or socket */ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+ init_special_inode(inode, obj->yst_mode, -+ old_decode_dev(obj->yst_rdev)); -+#else -+ init_special_inode(inode, obj->yst_mode, -+ (dev_t) (obj->yst_rdev)); -+#endif -+ break; -+ case S_IFREG: /* file */ -+ inode->i_op = &yaffs_file_inode_operations; -+ inode->i_fop = &yaffs_file_operations; -+ inode->i_mapping->a_ops = -+ &yaffs_file_address_operations; -+ break; -+ case S_IFDIR: /* directory */ -+ inode->i_op = &yaffs_dir_inode_operations; -+ inode->i_fop = &yaffs_dir_operations; -+ break; -+ case S_IFLNK: /* symlink */ -+ inode->i_op = &yaffs_symlink_inode_operations; -+ break; -+ } -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)) -+ inode->i_private = obj; -+#else -+ inode->u.generic_ip = obj; -+#endif -+ obj->myInode = inode; -+ -+ } else { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_FileInode invalid parameters\n")); -+ } -+ -+} -+ -+struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev, -+ yaffs_Object * obj) -+{ -+ struct inode *inode; -+ -+ if (!sb) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_get_inode for NULL super_block!!\n")); -+ return NULL; -+ -+ } -+ -+ if (!obj) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_get_inode for NULL object!!\n")); -+ return NULL; -+ -+ } -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId)); -+ -+ inode = iget(sb, obj->objectId); -+ -+ /* NB Side effect: iget calls back to yaffs_read_inode(). */ -+ /* iget also increments the inode's i_count */ -+ /* NB You can't be holding grossLock or deadlock will happen! */ -+ -+ return inode; -+} -+ -+static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n, -+ loff_t * pos) -+{ -+ yaffs_Object *obj; -+ int nWritten, ipos; -+ struct inode *inode; -+ yaffs_Device *dev; -+ -+ obj = yaffs_DentryToObject(f->f_dentry); -+ -+ dev = obj->myDev; -+ -+ yaffs_GrossLock(dev); -+ -+ inode = f->f_dentry->d_inode; -+ -+ if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND) { -+ ipos = inode->i_size; -+ } else { -+ ipos = *pos; -+ } -+ -+ if (!obj) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_file_write: hey obj is null!\n")); -+ } else { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG -+ "yaffs_file_write about to write writing %d bytes" -+ "to object %d at %d\n", -+ n, obj->objectId, ipos)); -+ } -+ -+ nWritten = yaffs_WriteDataToFile(obj, buf, ipos, n, 0); -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_file_write writing %d bytes, %d written at %d\n", -+ n, nWritten, ipos)); -+ if (nWritten > 0) { -+ ipos += nWritten; -+ *pos = ipos; -+ if (ipos > inode->i_size) { -+ inode->i_size = ipos; -+ inode->i_blocks = (ipos + 511) >> 9; -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG -+ "yaffs_file_write size updated to %d bytes, " -+ "%d blocks\n", -+ ipos, (int)(inode->i_blocks))); -+ } -+ -+ } -+ yaffs_GrossUnlock(dev); -+ return nWritten == 0 ? -ENOSPC : nWritten; -+} -+ -+static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir) -+{ -+ yaffs_Object *obj; -+ yaffs_Device *dev; -+ struct inode *inode = f->f_dentry->d_inode; -+ unsigned long offset, curoffs; -+ struct list_head *i; -+ yaffs_Object *l; -+ -+ char name[YAFFS_MAX_NAME_LENGTH + 1]; -+ -+ obj = yaffs_DentryToObject(f->f_dentry); -+ dev = obj->myDev; -+ -+ yaffs_GrossLock(dev); -+ -+ offset = f->f_pos; -+ -+ T(YAFFS_TRACE_OS, ("yaffs_readdir: starting at %d\n", (int)offset)); -+ -+ if (offset == 0) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_readdir: entry . ino %d \n", -+ (int)inode->i_ino)); -+ if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR) -+ < 0) { -+ goto out; -+ } -+ offset++; -+ f->f_pos++; -+ } -+ if (offset == 1) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_readdir: entry .. ino %d \n", -+ (int)f->f_dentry->d_parent->d_inode->i_ino)); -+ if (filldir -+ (dirent, "..", 2, offset, -+ f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) { -+ goto out; -+ } -+ offset++; -+ f->f_pos++; -+ } -+ -+ curoffs = 1; -+ -+ /* If the directory has changed since the open or last call to -+ readdir, rewind to after the 2 canned entries. */ -+ -+ if (f->f_version != inode->i_version) { -+ offset = 2; -+ f->f_pos = offset; -+ f->f_version = inode->i_version; -+ } -+ -+ list_for_each(i, &obj->variant.directoryVariant.children) { -+ curoffs++; -+ if (curoffs >= offset) { -+ l = list_entry(i, yaffs_Object, siblings); -+ -+ yaffs_GetObjectName(l, name, -+ YAFFS_MAX_NAME_LENGTH + 1); -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_readdir: %s inode %d\n", name, -+ yaffs_GetObjectInode(l))); -+ -+ if (filldir(dirent, -+ name, -+ strlen(name), -+ offset, -+ yaffs_GetObjectInode(l), -+ yaffs_GetObjectType(l)) -+ < 0) { -+ goto up_and_out; -+ } -+ -+ offset++; -+ f->f_pos++; -+ } -+ } -+ -+ up_and_out: -+ out: -+ -+ yaffs_GrossUnlock(dev); -+ -+ return 0; -+} -+ -+/* -+ * File creation. Allocate an inode, and we're done.. -+ */ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode, -+ dev_t rdev) -+#else -+static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode, -+ int rdev) -+#endif -+{ -+ struct inode *inode; -+ -+ yaffs_Object *obj = NULL; -+ yaffs_Device *dev; -+ -+ yaffs_Object *parent = yaffs_InodeToObject(dir); -+ -+ int error = -ENOSPC; -+ uid_t uid = current->fsuid; -+ gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid; -+ -+ if((dir->i_mode & S_ISGID) && S_ISDIR(mode)) -+ mode |= S_ISGID; -+ -+ if (parent) { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_mknod: parent object %d type %d\n", -+ parent->objectId, parent->variantType)); -+ } else { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_mknod: could not get parent object\n")); -+ return -EPERM; -+ } -+ -+ T(YAFFS_TRACE_OS, ("yaffs_mknod: making oject for %s, " -+ "mode %x dev %x\n", -+ dentry->d_name.name, mode, rdev)); -+ -+ dev = parent->myDev; -+ -+ yaffs_GrossLock(dev); -+ -+ switch (mode & S_IFMT) { -+ default: -+ /* Special (socket, fifo, device...) */ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG -+ "yaffs_mknod: making special\n")); -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+ obj = -+ yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid, -+ gid, old_encode_dev(rdev)); -+#else -+ obj = -+ yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid, -+ gid, rdev); -+#endif -+ break; -+ case S_IFREG: /* file */ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n")); -+ obj = -+ yaffs_MknodFile(parent, dentry->d_name.name, mode, uid, -+ gid); -+ break; -+ case S_IFDIR: /* directory */ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_mknod: making directory\n")); -+ obj = -+ yaffs_MknodDirectory(parent, dentry->d_name.name, mode, -+ uid, gid); -+ break; -+ case S_IFLNK: /* symlink */ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n")); -+ obj = NULL; /* Do we ever get here? */ -+ break; -+ } -+ -+ /* Can not call yaffs_get_inode() with gross lock held */ -+ yaffs_GrossUnlock(dev); -+ -+ if (obj) { -+ inode = yaffs_get_inode(dir->i_sb, mode, rdev, obj); -+ d_instantiate(dentry, inode); -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_mknod created object %d count = %d\n", -+ obj->objectId, atomic_read(&inode->i_count))); -+ error = 0; -+ } else { -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_mknod failed making object\n")); -+ error = -ENOMEM; -+ } -+ -+ return error; -+} -+ -+static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode) -+{ -+ int retVal; -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mkdir\n")); -+ retVal = yaffs_mknod(dir, dentry, mode | S_IFDIR, 0); -+#if 0 -+ /* attempt to fix dir bug - didn't work */ -+ if (!retVal) { -+ dget(dentry); -+ } -+#endif -+ return retVal; -+} -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode, -+ struct nameidata *n) -+#else -+static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode) -+#endif -+{ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_create\n")); -+ return yaffs_mknod(dir, dentry, mode | S_IFREG, 0); -+} -+ -+static int yaffs_unlink(struct inode *dir, struct dentry *dentry) -+{ -+ int retVal; -+ -+ yaffs_Device *dev; -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_unlink %d:%s\n", (int)(dir->i_ino), -+ dentry->d_name.name)); -+ -+ dev = yaffs_InodeToObject(dir)->myDev; -+ -+ yaffs_GrossLock(dev); -+ -+ retVal = yaffs_Unlink(yaffs_InodeToObject(dir), dentry->d_name.name); -+ -+ if (retVal == YAFFS_OK) { -+ dentry->d_inode->i_nlink--; -+ dir->i_version++; -+ yaffs_GrossUnlock(dev); -+ mark_inode_dirty(dentry->d_inode); -+ return 0; -+ } -+ yaffs_GrossUnlock(dev); -+ return -ENOTEMPTY; -+} -+ -+/* -+ * Create a link... -+ */ -+static int yaffs_link(struct dentry *old_dentry, struct inode *dir, -+ struct dentry *dentry) -+{ -+ struct inode *inode = old_dentry->d_inode; -+ yaffs_Object *obj = NULL; -+ yaffs_Object *link = NULL; -+ yaffs_Device *dev; -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_link\n")); -+ -+ obj = yaffs_InodeToObject(inode); -+ dev = obj->myDev; -+ -+ yaffs_GrossLock(dev); -+ -+ if (!S_ISDIR(inode->i_mode)) /* Don't link directories */ -+ { -+ link = -+ yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name, -+ obj); -+ } -+ -+ if (link) { -+ old_dentry->d_inode->i_nlink = yaffs_GetObjectLinkCount(obj); -+ d_instantiate(dentry, old_dentry->d_inode); -+ atomic_inc(&old_dentry->d_inode->i_count); -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_link link count %d i_count %d\n", -+ old_dentry->d_inode->i_nlink, -+ atomic_read(&old_dentry->d_inode->i_count))); -+ -+ } -+ -+ yaffs_GrossUnlock(dev); -+ -+ if (link) { -+ -+ return 0; -+ } -+ -+ return -EPERM; -+} -+ -+static int yaffs_symlink(struct inode *dir, struct dentry *dentry, -+ const char *symname) -+{ -+ yaffs_Object *obj; -+ yaffs_Device *dev; -+ uid_t uid = current->fsuid; -+ gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid; -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_symlink\n")); -+ -+ dev = yaffs_InodeToObject(dir)->myDev; -+ yaffs_GrossLock(dev); -+ obj = yaffs_MknodSymLink(yaffs_InodeToObject(dir), dentry->d_name.name, -+ S_IFLNK | S_IRWXUGO, uid, gid, symname); -+ yaffs_GrossUnlock(dev); -+ -+ if (obj) { -+ -+ struct inode *inode; -+ -+ inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj); -+ d_instantiate(dentry, inode); -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink created OK\n")); -+ return 0; -+ } else { -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink not created\n")); -+ -+ } -+ -+ return -ENOMEM; -+} -+ -+static int yaffs_sync_object(struct file *file, struct dentry *dentry, -+ int datasync) -+{ -+ -+ yaffs_Object *obj; -+ yaffs_Device *dev; -+ -+ obj = yaffs_DentryToObject(dentry); -+ -+ dev = obj->myDev; -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_object\n")); -+ yaffs_GrossLock(dev); -+ yaffs_FlushFile(obj, 1); -+ yaffs_GrossUnlock(dev); -+ return 0; -+} -+ -+/* -+ * The VFS layer already does all the dentry stuff for rename. -+ * -+ * NB: POSIX says you can rename an object over an old object of the same name -+ */ -+static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry, -+ struct inode *new_dir, struct dentry *new_dentry) -+{ -+ yaffs_Device *dev; -+ int retVal = YAFFS_FAIL; -+ yaffs_Object *target; -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_rename\n")); -+ dev = yaffs_InodeToObject(old_dir)->myDev; -+ -+ yaffs_GrossLock(dev); -+ -+ /* Check if the target is an existing directory that is not empty. */ -+ target = -+ yaffs_FindObjectByName(yaffs_InodeToObject(new_dir), -+ new_dentry->d_name.name); -+ -+ -+ -+ if (target && -+ target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY && -+ !list_empty(&target->variant.directoryVariant.children)) { -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "target is non-empty dir\n")); -+ -+ retVal = YAFFS_FAIL; -+ } else { -+ -+ /* Now does unlinking internally using shadowing mechanism */ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "calling yaffs_RenameObject\n")); -+ -+ retVal = -+ yaffs_RenameObject(yaffs_InodeToObject(old_dir), -+ old_dentry->d_name.name, -+ yaffs_InodeToObject(new_dir), -+ new_dentry->d_name.name); -+ -+ } -+ yaffs_GrossUnlock(dev); -+ -+ if (retVal == YAFFS_OK) { -+ if(target) { -+ new_dentry->d_inode->i_nlink--; -+ mark_inode_dirty(new_dentry->d_inode); -+ } -+ -+ return 0; -+ } else { -+ return -ENOTEMPTY; -+ } -+ -+} -+ -+static int yaffs_setattr(struct dentry *dentry, struct iattr *attr) -+{ -+ struct inode *inode = dentry->d_inode; -+ int error; -+ yaffs_Device *dev; -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_setattr of object %d\n", -+ yaffs_InodeToObject(inode)->objectId)); -+ -+ if ((error = inode_change_ok(inode, attr)) == 0) { -+ -+ dev = yaffs_InodeToObject(inode)->myDev; -+ yaffs_GrossLock(dev); -+ if (yaffs_SetAttributes(yaffs_InodeToObject(inode), attr) == -+ YAFFS_OK) { -+ error = 0; -+ } else { -+ error = -EPERM; -+ } -+ yaffs_GrossUnlock(dev); -+ if (!error) -+ error = inode_setattr(inode, attr); -+ } -+ return error; -+} -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf) -+{ -+ yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev; -+ struct super_block *sb = dentry->d_sb; -+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf) -+{ -+ yaffs_Device *dev = yaffs_SuperToDevice(sb); -+#else -+static int yaffs_statfs(struct super_block *sb, struct statfs *buf) -+{ -+ yaffs_Device *dev = yaffs_SuperToDevice(sb); -+#endif -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_statfs\n")); -+ -+ yaffs_GrossLock(dev); -+ -+ buf->f_type = YAFFS_MAGIC; -+ buf->f_bsize = sb->s_blocksize; -+ buf->f_namelen = 255; -+ if (sb->s_blocksize > dev->nDataBytesPerChunk) { -+ -+ buf->f_blocks = -+ (dev->endBlock - dev->startBlock + -+ 1) * dev->nChunksPerBlock / (sb->s_blocksize / -+ dev->nDataBytesPerChunk); -+ buf->f_bfree = -+ yaffs_GetNumberOfFreeChunks(dev) / (sb->s_blocksize / -+ dev->nDataBytesPerChunk); -+ } else { -+ -+ buf->f_blocks = -+ (dev->endBlock - dev->startBlock + -+ 1) * dev->nChunksPerBlock * (dev->nDataBytesPerChunk / -+ sb->s_blocksize); -+ buf->f_bfree = -+ yaffs_GetNumberOfFreeChunks(dev) * (dev->nDataBytesPerChunk / -+ sb->s_blocksize); -+ } -+ buf->f_files = 0; -+ buf->f_ffree = 0; -+ buf->f_bavail = buf->f_bfree; -+ -+ yaffs_GrossUnlock(dev); -+ return 0; -+} -+ -+ -+ -+static int yaffs_do_sync_fs(struct super_block *sb) -+{ -+ -+ yaffs_Device *dev = yaffs_SuperToDevice(sb); -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_do_sync_fs\n")); -+ -+ if(sb->s_dirt) { -+ yaffs_GrossLock(dev); -+ -+ if(dev) -+ yaffs_CheckpointSave(dev); -+ -+ yaffs_GrossUnlock(dev); -+ -+ sb->s_dirt = 0; -+ } -+ return 0; -+} -+ -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static void yaffs_write_super(struct super_block *sb) -+#else -+static int yaffs_write_super(struct super_block *sb) -+#endif -+{ -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_write_super\n")); -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)) -+ return 0; /* yaffs_do_sync_fs(sb);*/ -+#endif -+} -+ -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static int yaffs_sync_fs(struct super_block *sb, int wait) -+#else -+static int yaffs_sync_fs(struct super_block *sb) -+#endif -+{ -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_fs\n")); -+ -+ return 0; /* yaffs_do_sync_fs(sb);*/ -+ -+} -+ -+ -+static void yaffs_read_inode(struct inode *inode) -+{ -+ /* NB This is called as a side effect of other functions, but -+ * we had to release the lock to prevent deadlocks, so -+ * need to lock again. -+ */ -+ -+ yaffs_Object *obj; -+ yaffs_Device *dev = yaffs_SuperToDevice(inode->i_sb); -+ -+ T(YAFFS_TRACE_OS, -+ (KERN_DEBUG "yaffs_read_inode for %d\n", (int)inode->i_ino)); -+ -+ yaffs_GrossLock(dev); -+ -+ obj = yaffs_FindObjectByNumber(dev, inode->i_ino); -+ -+ yaffs_FillInodeFromObject(inode, obj); -+ -+ yaffs_GrossUnlock(dev); -+} -+ -+static LIST_HEAD(yaffs_dev_list); -+ -+static void yaffs_put_super(struct super_block *sb) -+{ -+ yaffs_Device *dev = yaffs_SuperToDevice(sb); -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_put_super\n")); -+ -+ yaffs_GrossLock(dev); -+ -+ yaffs_FlushEntireDeviceCache(dev); -+ -+ if (dev->putSuperFunc) { -+ dev->putSuperFunc(sb); -+ } -+ -+ yaffs_CheckpointSave(dev); -+ yaffs_Deinitialise(dev); -+ -+ yaffs_GrossUnlock(dev); -+ -+ /* we assume this is protected by lock_kernel() in mount/umount */ -+ list_del(&dev->devList); -+ -+ if(dev->spareBuffer){ -+ YFREE(dev->spareBuffer); -+ dev->spareBuffer = NULL; -+ } -+ -+ kfree(dev); -+} -+ -+ -+static void yaffs_MTDPutSuper(struct super_block *sb) -+{ -+ -+ struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice; -+ -+ if (mtd->sync) { -+ mtd->sync(mtd); -+ } -+ -+ put_mtd_device(mtd); -+} -+ -+ -+static void yaffs_MarkSuperBlockDirty(void *vsb) -+{ -+ struct super_block *sb = (struct super_block *)vsb; -+ -+ T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_MarkSuperBlockDirty() sb = %p\n",sb)); -+// if(sb) -+// sb->s_dirt = 1; -+} -+ -+static struct super_block *yaffs_internal_read_super(int yaffsVersion, -+ struct super_block *sb, -+ void *data, int silent) -+{ -+ int nBlocks; -+ struct inode *inode = NULL; -+ struct dentry *root; -+ yaffs_Device *dev = 0; -+ char devname_buf[BDEVNAME_SIZE + 1]; -+ struct mtd_info *mtd; -+ int err; -+ -+ sb->s_magic = YAFFS_MAGIC; -+ sb->s_op = &yaffs_super_ops; -+ -+ if (!sb) -+ printk(KERN_INFO "yaffs: sb is NULL\n"); -+ else if (!sb->s_dev) -+ printk(KERN_INFO "yaffs: sb->s_dev is NULL\n"); -+ else if (!yaffs_devname(sb, devname_buf)) -+ printk(KERN_INFO "yaffs: devname is NULL\n"); -+ else -+ printk(KERN_INFO "yaffs: dev is %d name is \"%s\"\n", -+ sb->s_dev, -+ yaffs_devname(sb, devname_buf)); -+ -+ sb->s_blocksize = PAGE_CACHE_SIZE; -+ sb->s_blocksize_bits = PAGE_CACHE_SHIFT; -+ T(YAFFS_TRACE_OS, ("yaffs_read_super: Using yaffs%d\n", yaffsVersion)); -+ T(YAFFS_TRACE_OS, -+ ("yaffs_read_super: block size %d\n", (int)(sb->s_blocksize))); -+ -+#ifdef CONFIG_YAFFS_DISABLE_WRITE_VERIFY -+ T(YAFFS_TRACE_OS, -+ ("yaffs: Write verification disabled. All guarantees " -+ "null and void\n")); -+#endif -+ -+ T(YAFFS_TRACE_ALWAYS, ("yaffs: Attempting MTD mount on %u.%u, " -+ "\"%s\"\n", -+ MAJOR(sb->s_dev), MINOR(sb->s_dev), -+ yaffs_devname(sb, devname_buf))); -+ -+ /* Check it's an mtd device..... */ -+ if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR) { -+ return NULL; /* This isn't an mtd device */ -+ } -+ /* Get the device */ -+ mtd = get_mtd_device(NULL, MINOR(sb->s_dev)); -+ if (!mtd) { -+ T(YAFFS_TRACE_ALWAYS, -+ ("yaffs: MTD device #%u doesn't appear to exist\n", -+ MINOR(sb->s_dev))); -+ return NULL; -+ } -+ /* Check it's NAND */ -+ if (mtd->type != MTD_NANDFLASH) { -+ T(YAFFS_TRACE_ALWAYS, -+ ("yaffs: MTD device is not NAND it's type %d\n", mtd->type)); -+ return NULL; -+ } -+ -+ T(YAFFS_TRACE_OS, (" erase %p\n", mtd->erase)); -+ T(YAFFS_TRACE_OS, (" read %p\n", mtd->read)); -+ T(YAFFS_TRACE_OS, (" write %p\n", mtd->write)); -+ T(YAFFS_TRACE_OS, (" readoob %p\n", mtd->read_oob)); -+ T(YAFFS_TRACE_OS, (" writeoob %p\n", mtd->write_oob)); -+ T(YAFFS_TRACE_OS, (" block_isbad %p\n", mtd->block_isbad)); -+ T(YAFFS_TRACE_OS, (" block_markbad %p\n", mtd->block_markbad)); -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ T(YAFFS_TRACE_OS, (" writesize %d\n", mtd->writesize)); -+#else -+ T(YAFFS_TRACE_OS, (" oobblock %d\n", mtd->oobblock)); -+#endif -+ T(YAFFS_TRACE_OS, (" oobsize %d\n", mtd->oobsize)); -+ T(YAFFS_TRACE_OS, (" erasesize %d\n", mtd->erasesize)); -+ T(YAFFS_TRACE_OS, (" size %d\n", mtd->size)); -+ -+#ifdef CONFIG_YAFFS_AUTO_YAFFS2 -+ -+ if (yaffsVersion == 1 && -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ mtd->writesize >= 2048) { -+#else -+ mtd->oobblock >= 2048) { -+#endif -+ T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs2\n")); -+ yaffsVersion = 2; -+ } -+ -+ /* Added NCB 26/5/2006 for completeness */ -+ if (yaffsVersion == 2 && -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ mtd->writesize == 512) { -+#else -+ mtd->oobblock == 512) { -+#endif -+ T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs1\n")); -+ yaffsVersion = 1; -+ } -+ -+#endif -+ -+ if (yaffsVersion == 2) { -+ /* Check for version 2 style functions */ -+ if (!mtd->erase || -+ !mtd->block_isbad || -+ !mtd->block_markbad || -+ !mtd->read || -+ !mtd->write || -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ !mtd->read_oob || !mtd->write_oob) { -+#else -+ !mtd->write_ecc || -+ !mtd->read_ecc || !mtd->read_oob || !mtd->write_oob) { -+#endif -+ T(YAFFS_TRACE_ALWAYS, -+ ("yaffs: MTD device does not support required " -+ "functions\n"));; -+ return NULL; -+ } -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ if (mtd->writesize < YAFFS_MIN_YAFFS2_CHUNK_SIZE || -+#else -+ if (mtd->oobblock < YAFFS_MIN_YAFFS2_CHUNK_SIZE || -+#endif -+ mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) { -+ T(YAFFS_TRACE_ALWAYS, -+ ("yaffs: MTD device does not have the " -+ "right page sizes\n")); -+ return NULL; -+ } -+ } else { -+ /* Check for V1 style functions */ -+ if (!mtd->erase || -+ !mtd->read || -+ !mtd->write || -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ !mtd->read_oob || !mtd->write_oob) { -+#else -+ !mtd->write_ecc || -+ !mtd->read_ecc || !mtd->read_oob || !mtd->write_oob) { -+#endif -+ T(YAFFS_TRACE_ALWAYS, -+ ("yaffs: MTD device does not support required " -+ "functions\n"));; -+ return NULL; -+ } -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ if (mtd->writesize < YAFFS_BYTES_PER_CHUNK || -+#else -+ if (mtd->oobblock < YAFFS_BYTES_PER_CHUNK || -+#endif -+ mtd->oobsize != YAFFS_BYTES_PER_SPARE) { -+ T(YAFFS_TRACE_ALWAYS, -+ ("yaffs: MTD device does not support have the " -+ "right page sizes\n")); -+ return NULL; -+ } -+ } -+ -+ /* OK, so if we got here, we have an MTD that's NAND and looks -+ * like it has the right capabilities -+ * Set the yaffs_Device up for mtd -+ */ -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+ sb->s_fs_info = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL); -+#else -+ sb->u.generic_sbp = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL); -+#endif -+ if (!dev) { -+ /* Deep shit could not allocate device structure */ -+ T(YAFFS_TRACE_ALWAYS, -+ ("yaffs_read_super: Failed trying to allocate " -+ "yaffs_Device. \n")); -+ return NULL; -+ } -+ -+ memset(dev, 0, sizeof(yaffs_Device)); -+ dev->genericDevice = mtd; -+ dev->name = mtd->name; -+ -+ /* Set up the memory size parameters.... */ -+ -+ nBlocks = mtd->size / (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK); -+ dev->startBlock = 0; -+ dev->endBlock = nBlocks - 1; -+ dev->nChunksPerBlock = YAFFS_CHUNKS_PER_BLOCK; -+ dev->nDataBytesPerChunk = YAFFS_BYTES_PER_CHUNK; -+ dev->nReservedBlocks = 5; -+ dev->nShortOpCaches = 10; /* Enable short op caching */ -+ -+ /* ... and the functions. */ -+ if (yaffsVersion == 2) { -+ dev->writeChunkWithTagsToNAND = -+ nandmtd2_WriteChunkWithTagsToNAND; -+ dev->readChunkWithTagsFromNAND = -+ nandmtd2_ReadChunkWithTagsFromNAND; -+ dev->markNANDBlockBad = nandmtd2_MarkNANDBlockBad; -+ dev->queryNANDBlock = nandmtd2_QueryNANDBlock; -+ dev->spareBuffer = YMALLOC(mtd->oobsize); -+ dev->isYaffs2 = 1; -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ dev->nDataBytesPerChunk = mtd->writesize; -+ dev->nChunksPerBlock = mtd->erasesize / mtd->writesize; -+#else -+ dev->nDataBytesPerChunk = mtd->oobblock; -+ dev->nChunksPerBlock = mtd->erasesize / mtd->oobblock; -+#endif -+ nBlocks = mtd->size / mtd->erasesize; -+ -+ dev->nCheckpointReservedBlocks = 0; -+ dev->startBlock = 0; -+ dev->endBlock = nBlocks - 1; -+ } else { -+ dev->writeChunkToNAND = nandmtd_WriteChunkToNAND; -+ dev->readChunkFromNAND = nandmtd_ReadChunkFromNAND; -+ dev->isYaffs2 = 0; -+ } -+ /* ... and common functions */ -+ dev->eraseBlockInNAND = nandmtd_EraseBlockInNAND; -+ dev->initialiseNAND = nandmtd_InitialiseNAND; -+ -+ dev->putSuperFunc = yaffs_MTDPutSuper; -+ -+ dev->superBlock = (void *)sb; -+ dev->markSuperBlockDirty = yaffs_MarkSuperBlockDirty; -+ -+ -+#ifndef CONFIG_YAFFS_DOES_ECC -+ dev->useNANDECC = 1; -+#endif -+ -+#ifdef CONFIG_YAFFS_DISABLE_WIDE_TNODES -+ dev->wideTnodesDisabled = 1; -+#endif -+ -+ /* we assume this is protected by lock_kernel() in mount/umount */ -+ list_add_tail(&dev->devList, &yaffs_dev_list); -+ -+ init_MUTEX(&dev->grossLock); -+ -+ yaffs_GrossLock(dev); -+ -+ err = yaffs_GutsInitialise(dev); -+ -+ T(YAFFS_TRACE_OS, -+ ("yaffs_read_super: guts initialised %s\n", -+ (err == YAFFS_OK) ? "OK" : "FAILED")); -+ -+ /* Release lock before yaffs_get_inode() */ -+ yaffs_GrossUnlock(dev); -+ -+ /* Create root inode */ -+ if (err == YAFFS_OK) -+ inode = yaffs_get_inode(sb, S_IFDIR | 0755, 0, -+ yaffs_Root(dev)); -+ -+ if (!inode) -+ return NULL; -+ -+ inode->i_op = &yaffs_dir_inode_operations; -+ inode->i_fop = &yaffs_dir_operations; -+ -+ T(YAFFS_TRACE_OS, ("yaffs_read_super: got root inode\n")); -+ -+ root = d_alloc_root(inode); -+ -+ T(YAFFS_TRACE_OS, ("yaffs_read_super: d_alloc_root done\n")); -+ -+ if (!root) { -+ iput(inode); -+ return NULL; -+ } -+ sb->s_root = root; -+ -+ T(YAFFS_TRACE_OS, ("yaffs_read_super: done\n")); -+ return sb; -+} -+ -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data, -+ int silent) -+{ -+ return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL; -+} -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static int yaffs_read_super(struct file_system_type *fs, -+ int flags, const char *dev_name, -+ void *data, struct vfsmount *mnt) -+{ -+ -+ return get_sb_bdev(fs, flags, dev_name, data, -+ yaffs_internal_read_super_mtd, mnt); -+} -+#else -+static struct super_block *yaffs_read_super(struct file_system_type *fs, -+ int flags, const char *dev_name, -+ void *data) -+{ -+ -+ return get_sb_bdev(fs, flags, dev_name, data, -+ yaffs_internal_read_super_mtd); -+} -+#endif -+ -+static struct file_system_type yaffs_fs_type = { -+ .owner = THIS_MODULE, -+ .name = "yaffs", -+ .get_sb = yaffs_read_super, -+ .kill_sb = kill_block_super, -+ .fs_flags = FS_REQUIRES_DEV, -+}; -+#else -+static struct super_block *yaffs_read_super(struct super_block *sb, void *data, -+ int silent) -+{ -+ return yaffs_internal_read_super(1, sb, data, silent); -+} -+ -+static DECLARE_FSTYPE(yaffs_fs_type, "yaffs", yaffs_read_super, -+ FS_REQUIRES_DEV); -+#endif -+ -+ -+#ifdef CONFIG_YAFFS_YAFFS2 -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data, -+ int silent) -+{ -+ return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL; -+} -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static int yaffs2_read_super(struct file_system_type *fs, -+ int flags, const char *dev_name, void *data, -+ struct vfsmount *mnt) -+{ -+ return get_sb_bdev(fs, flags, dev_name, data, -+ yaffs2_internal_read_super_mtd, mnt); -+} -+#else -+static struct super_block *yaffs2_read_super(struct file_system_type *fs, -+ int flags, const char *dev_name, -+ void *data) -+{ -+ -+ return get_sb_bdev(fs, flags, dev_name, data, -+ yaffs2_internal_read_super_mtd); -+} -+#endif -+ -+static struct file_system_type yaffs2_fs_type = { -+ .owner = THIS_MODULE, -+ .name = "yaffs2", -+ .get_sb = yaffs2_read_super, -+ .kill_sb = kill_block_super, -+ .fs_flags = FS_REQUIRES_DEV, -+}; -+#else -+static struct super_block *yaffs2_read_super(struct super_block *sb, -+ void *data, int silent) -+{ -+ return yaffs_internal_read_super(2, sb, data, silent); -+} -+ -+static DECLARE_FSTYPE(yaffs2_fs_type, "yaffs2", yaffs2_read_super, -+ FS_REQUIRES_DEV); -+#endif -+ -+#endif /* CONFIG_YAFFS_YAFFS2 */ -+ -+static struct proc_dir_entry *my_proc_entry; -+ -+static char *yaffs_dump_dev(char *buf, yaffs_Device * dev) -+{ -+ buf += sprintf(buf, "startBlock......... %d\n", dev->startBlock); -+ buf += sprintf(buf, "endBlock........... %d\n", dev->endBlock); -+ buf += sprintf(buf, "chunkGroupBits..... %d\n", dev->chunkGroupBits); -+ buf += sprintf(buf, "chunkGroupSize..... %d\n", dev->chunkGroupSize); -+ buf += sprintf(buf, "nErasedBlocks...... %d\n", dev->nErasedBlocks); -+ buf += sprintf(buf, "nTnodesCreated..... %d\n", dev->nTnodesCreated); -+ buf += sprintf(buf, "nFreeTnodes........ %d\n", dev->nFreeTnodes); -+ buf += sprintf(buf, "nObjectsCreated.... %d\n", dev->nObjectsCreated); -+ buf += sprintf(buf, "nFreeObjects....... %d\n", dev->nFreeObjects); -+ buf += sprintf(buf, "nFreeChunks........ %d\n", dev->nFreeChunks); -+ buf += sprintf(buf, "nPageWrites........ %d\n", dev->nPageWrites); -+ buf += sprintf(buf, "nPageReads......... %d\n", dev->nPageReads); -+ buf += sprintf(buf, "nBlockErasures..... %d\n", dev->nBlockErasures); -+ buf += sprintf(buf, "nGCCopies.......... %d\n", dev->nGCCopies); -+ buf += -+ sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections); -+ buf += -+ sprintf(buf, "passiveGCs......... %d\n", -+ dev->passiveGarbageCollections); -+ buf += sprintf(buf, "nRetriedWrites..... %d\n", dev->nRetriedWrites); -+ buf += sprintf(buf, "nRetireBlocks...... %d\n", dev->nRetiredBlocks); -+ buf += sprintf(buf, "eccFixed........... %d\n", dev->eccFixed); -+ buf += sprintf(buf, "eccUnfixed......... %d\n", dev->eccUnfixed); -+ buf += sprintf(buf, "tagsEccFixed....... %d\n", dev->tagsEccFixed); -+ buf += sprintf(buf, "tagsEccUnfixed..... %d\n", dev->tagsEccUnfixed); -+ buf += sprintf(buf, "cacheHits.......... %d\n", dev->cacheHits); -+ buf += sprintf(buf, "nDeletedFiles...... %d\n", dev->nDeletedFiles); -+ buf += sprintf(buf, "nUnlinkedFiles..... %d\n", dev->nUnlinkedFiles); -+ buf += -+ sprintf(buf, "nBackgroudDeletions %d\n", dev->nBackgroundDeletions); -+ buf += sprintf(buf, "useNANDECC......... %d\n", dev->useNANDECC); -+ buf += sprintf(buf, "isYaffs2........... %d\n", dev->isYaffs2); -+ -+ return buf; -+} -+ -+static int yaffs_proc_read(char *page, -+ char **start, -+ off_t offset, int count, int *eof, void *data) -+{ -+ struct list_head *item; -+ char *buf = page; -+ int step = offset; -+ int n = 0; -+ -+ /* Get proc_file_read() to step 'offset' by one on each sucessive call. -+ * We use 'offset' (*ppos) to indicate where we are in devList. -+ * This also assumes the user has posted a read buffer large -+ * enough to hold the complete output; but that's life in /proc. -+ */ -+ -+ *(int *)start = 1; -+ -+ /* Print header first */ -+ if (step == 0) { -+ buf += sprintf(buf, "YAFFS built:" __DATE__ " " __TIME__ -+ "\n%s\n%s\n", yaffs_fs_c_version, -+ yaffs_guts_c_version); -+ } -+ -+ /* hold lock_kernel while traversing yaffs_dev_list */ -+ lock_kernel(); -+ -+ /* Locate and print the Nth entry. Order N-squared but N is small. */ -+ list_for_each(item, &yaffs_dev_list) { -+ yaffs_Device *dev = list_entry(item, yaffs_Device, devList); -+ if (n < step) { -+ n++; -+ continue; -+ } -+ buf += sprintf(buf, "\nDevice %d \"%s\"\n", n, dev->name); -+ buf = yaffs_dump_dev(buf, dev); -+ break; -+ } -+ unlock_kernel(); -+ -+ return buf - page < count ? buf - page : count; -+} -+ -+/** -+ * Set the verbosity of the warnings and error messages. -+ * -+ */ -+ -+static struct { -+ char *mask_name; -+ unsigned mask_bitfield; -+} mask_flags[] = { -+ {"allocate", YAFFS_TRACE_ALLOCATE}, -+ {"always", YAFFS_TRACE_ALWAYS}, -+ {"bad_blocks", YAFFS_TRACE_BAD_BLOCKS}, -+ {"buffers", YAFFS_TRACE_BUFFERS}, -+ {"bug", YAFFS_TRACE_BUG}, -+ {"deletion", YAFFS_TRACE_DELETION}, -+ {"erase", YAFFS_TRACE_ERASE}, -+ {"error", YAFFS_TRACE_ERROR}, -+ {"gc_detail", YAFFS_TRACE_GC_DETAIL}, -+ {"gc", YAFFS_TRACE_GC}, -+ {"mtd", YAFFS_TRACE_MTD}, -+ {"nandaccess", YAFFS_TRACE_NANDACCESS}, -+ {"os", YAFFS_TRACE_OS}, -+ {"scan_debug", YAFFS_TRACE_SCAN_DEBUG}, -+ {"scan", YAFFS_TRACE_SCAN}, -+ {"tracing", YAFFS_TRACE_TRACING}, -+ {"write", YAFFS_TRACE_WRITE}, -+ {"all", 0xffffffff}, -+ {"none", 0}, -+ {NULL, 0}, -+}; -+ -+static int yaffs_proc_write(struct file *file, const char *buf, -+ unsigned long count, void *data) -+{ -+ unsigned rg = 0, mask_bitfield; -+ char *end, *mask_name; -+ int i; -+ int done = 0; -+ int add, len; -+ int pos = 0; -+ -+ rg = yaffs_traceMask; -+ -+ while (!done && (pos < count)) { -+ done = 1; -+ while ((pos < count) && isspace(buf[pos])) { -+ pos++; -+ } -+ -+ switch (buf[pos]) { -+ case '+': -+ case '-': -+ case '=': -+ add = buf[pos]; -+ pos++; -+ break; -+ -+ default: -+ add = ' '; -+ break; -+ } -+ mask_name = NULL; -+ mask_bitfield = simple_strtoul(buf + pos, &end, 0); -+ if (end > buf + pos) { -+ mask_name = "numeral"; -+ len = end - (buf + pos); -+ done = 0; -+ } else { -+ -+ for (i = 0; mask_flags[i].mask_name != NULL; i++) { -+ len = strlen(mask_flags[i].mask_name); -+ if (strncmp(buf + pos, mask_flags[i].mask_name, len) == 0) { -+ mask_name = mask_flags[i].mask_name; -+ mask_bitfield = mask_flags[i].mask_bitfield; -+ done = 0; -+ break; -+ } -+ } -+ } -+ -+ if (mask_name != NULL) { -+ pos += len; -+ done = 0; -+ switch(add) { -+ case '-': -+ rg &= ~mask_bitfield; -+ break; -+ case '+': -+ rg |= mask_bitfield; -+ break; -+ case '=': -+ rg = mask_bitfield; -+ break; -+ default: -+ rg |= mask_bitfield; -+ break; -+ } -+ } -+ } -+ -+ yaffs_traceMask = rg; -+ if (rg & YAFFS_TRACE_ALWAYS) { -+ for (i = 0; mask_flags[i].mask_name != NULL; i++) { -+ char flag; -+ flag = ((rg & mask_flags[i].mask_bitfield) == mask_flags[i].mask_bitfield) ? '+' : '-'; -+ printk("%c%s\n", flag, mask_flags[i].mask_name); -+ } -+ } -+ -+ return count; -+} -+ -+/* Stuff to handle installation of file systems */ -+struct file_system_to_install { -+ struct file_system_type *fst; -+ int installed; -+}; -+ -+static struct file_system_to_install fs_to_install[] = { -+//#ifdef CONFIG_YAFFS_YAFFS1 -+ {&yaffs_fs_type, 0}, -+//#endif -+//#ifdef CONFIG_YAFFS_YAFFS2 -+ {&yaffs2_fs_type, 0}, -+//#endif -+ {NULL, 0} -+}; -+ -+static int __init init_yaffs_fs(void) -+{ -+ int error = 0; -+ struct file_system_to_install *fsinst; -+ -+ T(YAFFS_TRACE_ALWAYS, -+ ("yaffs " __DATE__ " " __TIME__ " Installing. \n")); -+ -+ /* Install the proc_fs entry */ -+ my_proc_entry = create_proc_entry("yaffs", -+ S_IRUGO | S_IFREG, -+ &proc_root); -+ -+ if (my_proc_entry) { -+ my_proc_entry->write_proc = yaffs_proc_write; -+ my_proc_entry->read_proc = yaffs_proc_read; -+ my_proc_entry->data = NULL; -+ } else { -+ return -ENOMEM; -+ } -+ -+ /* Now add the file system entries */ -+ -+ fsinst = fs_to_install; -+ -+ while (fsinst->fst && !error) { -+ error = register_filesystem(fsinst->fst); -+ if (!error) { -+ fsinst->installed = 1; -+ } -+ fsinst++; -+ } -+ -+ /* Any errors? uninstall */ -+ if (error) { -+ fsinst = fs_to_install; -+ -+ while (fsinst->fst) { -+ if (fsinst->installed) { -+ unregister_filesystem(fsinst->fst); -+ fsinst->installed = 0; -+ } -+ fsinst++; -+ } -+ } -+ -+ return error; -+} -+ -+static void __exit exit_yaffs_fs(void) -+{ -+ -+ struct file_system_to_install *fsinst; -+ -+ T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__ -+ " removing. \n")); -+ -+ remove_proc_entry("yaffs", &proc_root); -+ -+ fsinst = fs_to_install; -+ -+ while (fsinst->fst) { -+ if (fsinst->installed) { -+ unregister_filesystem(fsinst->fst); -+ fsinst->installed = 0; -+ } -+ fsinst++; -+ } -+ -+} -+ -+module_init(init_yaffs_fs) -+module_exit(exit_yaffs_fs) -+ -+MODULE_DESCRIPTION("YAFFS2 - a NAND specific flash file system"); -+MODULE_AUTHOR("Charles Manning, Aleph One Ltd., 2002-2006"); -+MODULE_LICENSE("GPL"); -diff -urN linux.old/fs/yaffs2/yaffs_guts.c linux.dev/fs/yaffs2/yaffs_guts.c ---- linux.old/fs/yaffs2/yaffs_guts.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_guts.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,6675 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+const char *yaffs_guts_c_version = -+ "$Id: yaffs_guts.c,v 1.45 2006/11/14 03:07:17 charles Exp $"; -+ -+#include "yportenv.h" -+ -+#include "yaffsinterface.h" -+#include "yaffs_guts.h" -+#include "yaffs_tagsvalidity.h" -+ -+#include "yaffs_tagscompat.h" -+#ifndef CONFIG_YAFFS_OWN_SORT -+#include "yaffs_qsort.h" -+#endif -+#include "yaffs_nand.h" -+ -+#include "yaffs_checkptrw.h" -+ -+#include "yaffs_nand.h" -+#include "yaffs_packedtags2.h" -+ -+ -+#ifdef CONFIG_YAFFS_WINCE -+void yfsd_LockYAFFS(BOOL fsLockOnly); -+void yfsd_UnlockYAFFS(BOOL fsLockOnly); -+#endif -+ -+#define YAFFS_PASSIVE_GC_CHUNKS 2 -+ -+#include "yaffs_ecc.h" -+ -+ -+/* Robustification (if it ever comes about...) */ -+static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND); -+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk); -+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND, -+ const __u8 * data, -+ const yaffs_ExtendedTags * tags); -+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND, -+ const yaffs_ExtendedTags * tags); -+ -+/* Other local prototypes */ -+static int yaffs_UnlinkObject( yaffs_Object *obj); -+static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj); -+ -+static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList); -+ -+static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device * dev, -+ const __u8 * buffer, -+ yaffs_ExtendedTags * tags, -+ int useReserve); -+static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode, -+ int chunkInNAND, int inScan); -+ -+static yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number, -+ yaffs_ObjectType type); -+static void yaffs_AddObjectToDirectory(yaffs_Object * directory, -+ yaffs_Object * obj); -+static int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, -+ int force, int isShrink, int shadows); -+static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj); -+static int yaffs_CheckStructures(void); -+static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level, -+ int chunkOffset, int *limit); -+static int yaffs_DoGenericObjectDeletion(yaffs_Object * in); -+ -+static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blockNo); -+ -+static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo); -+static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer, -+ int lineNo); -+ -+static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev, -+ int chunkInNAND); -+ -+static int yaffs_UnlinkWorker(yaffs_Object * obj); -+static void yaffs_DestroyObject(yaffs_Object * obj); -+ -+static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId, -+ int chunkInObject); -+ -+loff_t yaffs_GetFileSize(yaffs_Object * obj); -+ -+static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr); -+ -+static void yaffs_VerifyFreeChunks(yaffs_Device * dev); -+ -+#ifdef YAFFS_PARANOID -+static int yaffs_CheckFileSanity(yaffs_Object * in); -+#else -+#define yaffs_CheckFileSanity(in) -+#endif -+ -+static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in); -+static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId); -+ -+static void yaffs_InvalidateCheckpoint(yaffs_Device *dev); -+ -+ -+ -+/* Function to calculate chunk and offset */ -+ -+static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, __u32 *chunk, __u32 *offset) -+{ -+ if(dev->chunkShift){ -+ /* Easy-peasy power of 2 case */ -+ *chunk = (__u32)(addr >> dev->chunkShift); -+ *offset = (__u32)(addr & dev->chunkMask); -+ } -+ else if(dev->crumbsPerChunk) -+ { -+ /* Case where we're using "crumbs" */ -+ *offset = (__u32)(addr & dev->crumbMask); -+ addr >>= dev->crumbShift; -+ *chunk = ((__u32)addr)/dev->crumbsPerChunk; -+ *offset += ((addr - (*chunk * dev->crumbsPerChunk)) << dev->crumbShift); -+ } -+ else -+ YBUG(); -+} -+ -+/* Function to return the number of shifts for a power of 2 greater than or equal -+ * to the given number -+ * Note we don't try to cater for all possible numbers and this does not have to -+ * be hellishly efficient. -+ */ -+ -+static __u32 ShiftsGE(__u32 x) -+{ -+ int extraBits; -+ int nShifts; -+ -+ nShifts = extraBits = 0; -+ -+ while(x>1){ -+ if(x & 1) extraBits++; -+ x>>=1; -+ nShifts++; -+ } -+ -+ if(extraBits) -+ nShifts++; -+ -+ return nShifts; -+} -+ -+/* Function to return the number of shifts to get a 1 in bit 0 -+ */ -+ -+static __u32 ShiftDiv(__u32 x) -+{ -+ int nShifts; -+ -+ nShifts = 0; -+ -+ if(!x) return 0; -+ -+ while( !(x&1)){ -+ x>>=1; -+ nShifts++; -+ } -+ -+ return nShifts; -+} -+ -+ -+ -+/* -+ * Temporary buffer manipulations. -+ */ -+ -+static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo) -+{ -+ int i, j; -+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) { -+ if (dev->tempBuffer[i].line == 0) { -+ dev->tempBuffer[i].line = lineNo; -+ if ((i + 1) > dev->maxTemp) { -+ dev->maxTemp = i + 1; -+ for (j = 0; j <= i; j++) -+ dev->tempBuffer[j].maxLine = -+ dev->tempBuffer[j].line; -+ } -+ -+ return dev->tempBuffer[i].buffer; -+ } -+ } -+ -+ T(YAFFS_TRACE_BUFFERS, -+ (TSTR("Out of temp buffers at line %d, other held by lines:"), -+ lineNo)); -+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) { -+ T(YAFFS_TRACE_BUFFERS, (TSTR(" %d "), dev->tempBuffer[i].line)); -+ } -+ T(YAFFS_TRACE_BUFFERS, (TSTR(" " TENDSTR))); -+ -+ /* -+ * If we got here then we have to allocate an unmanaged one -+ * This is not good. -+ */ -+ -+ dev->unmanagedTempAllocations++; -+ return YMALLOC(dev->nDataBytesPerChunk); -+ -+} -+ -+static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer, -+ int lineNo) -+{ -+ int i; -+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) { -+ if (dev->tempBuffer[i].buffer == buffer) { -+ dev->tempBuffer[i].line = 0; -+ return; -+ } -+ } -+ -+ if (buffer) { -+ /* assume it is an unmanaged one. */ -+ T(YAFFS_TRACE_BUFFERS, -+ (TSTR("Releasing unmanaged temp buffer in line %d" TENDSTR), -+ lineNo)); -+ YFREE(buffer); -+ dev->unmanagedTempDeallocations++; -+ } -+ -+} -+ -+/* -+ * Determine if we have a managed buffer. -+ */ -+int yaffs_IsManagedTempBuffer(yaffs_Device * dev, const __u8 * buffer) -+{ -+ int i; -+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) { -+ if (dev->tempBuffer[i].buffer == buffer) -+ return 1; -+ -+ } -+ -+ for (i = 0; i < dev->nShortOpCaches; i++) { -+ if( dev->srCache[i].data == buffer ) -+ return 1; -+ -+ } -+ -+ if (buffer == dev->checkpointBuffer) -+ return 1; -+ -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("yaffs: unmaged buffer detected.\n" TENDSTR))); -+ return 0; -+} -+ -+/* -+ * Chunk bitmap manipulations -+ */ -+ -+static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device * dev, int blk) -+{ -+ if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR), -+ blk)); -+ YBUG(); -+ } -+ return dev->chunkBits + -+ (dev->chunkBitmapStride * (blk - dev->internalStartBlock)); -+} -+ -+static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device * dev, int blk) -+{ -+ __u8 *blkBits = yaffs_BlockBits(dev, blk); -+ -+ memset(blkBits, 0, dev->chunkBitmapStride); -+} -+ -+static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device * dev, int blk, int chunk) -+{ -+ __u8 *blkBits = yaffs_BlockBits(dev, blk); -+ -+ blkBits[chunk / 8] &= ~(1 << (chunk & 7)); -+} -+ -+static Y_INLINE void yaffs_SetChunkBit(yaffs_Device * dev, int blk, int chunk) -+{ -+ __u8 *blkBits = yaffs_BlockBits(dev, blk); -+ -+ blkBits[chunk / 8] |= (1 << (chunk & 7)); -+} -+ -+static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device * dev, int blk, int chunk) -+{ -+ __u8 *blkBits = yaffs_BlockBits(dev, blk); -+ return (blkBits[chunk / 8] & (1 << (chunk & 7))) ? 1 : 0; -+} -+ -+static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device * dev, int blk) -+{ -+ __u8 *blkBits = yaffs_BlockBits(dev, blk); -+ int i; -+ for (i = 0; i < dev->chunkBitmapStride; i++) { -+ if (*blkBits) -+ return 1; -+ blkBits++; -+ } -+ return 0; -+} -+ -+/* -+ * Simple hash function. Needs to have a reasonable spread -+ */ -+ -+static Y_INLINE int yaffs_HashFunction(int n) -+{ -+ n = abs(n); -+ return (n % YAFFS_NOBJECT_BUCKETS); -+} -+ -+/* -+ * Access functions to useful fake objects -+ */ -+ -+yaffs_Object *yaffs_Root(yaffs_Device * dev) -+{ -+ return dev->rootDir; -+} -+ -+yaffs_Object *yaffs_LostNFound(yaffs_Device * dev) -+{ -+ return dev->lostNFoundDir; -+} -+ -+ -+/* -+ * Erased NAND checking functions -+ */ -+ -+int yaffs_CheckFF(__u8 * buffer, int nBytes) -+{ -+ /* Horrible, slow implementation */ -+ while (nBytes--) { -+ if (*buffer != 0xFF) -+ return 0; -+ buffer++; -+ } -+ return 1; -+} -+ -+static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev, -+ int chunkInNAND) -+{ -+ -+ int retval = YAFFS_OK; -+ __u8 *data = yaffs_GetTempBuffer(dev, __LINE__); -+ yaffs_ExtendedTags tags; -+ int result; -+ -+ result = yaffs_ReadChunkWithTagsFromNAND(dev, chunkInNAND, data, &tags); -+ -+ if(tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR) -+ retval = YAFFS_FAIL; -+ -+ -+ if (!yaffs_CheckFF(data, dev->nDataBytesPerChunk) || tags.chunkUsed) { -+ T(YAFFS_TRACE_NANDACCESS, -+ (TSTR("Chunk %d not erased" TENDSTR), chunkInNAND)); -+ retval = YAFFS_FAIL; -+ } -+ -+ yaffs_ReleaseTempBuffer(dev, data, __LINE__); -+ -+ return retval; -+ -+} -+ -+static int yaffs_WriteNewChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev, -+ const __u8 * data, -+ yaffs_ExtendedTags * tags, -+ int useReserve) -+{ -+ int chunk; -+ -+ int writeOk = 0; -+ int erasedOk = 1; -+ int attempts = 0; -+ yaffs_BlockInfo *bi; -+ -+ yaffs_InvalidateCheckpoint(dev); -+ -+ do { -+ chunk = yaffs_AllocateChunk(dev, useReserve,&bi); -+ -+ if (chunk >= 0) { -+ /* First check this chunk is erased, if it needs checking. -+ * The checking policy (unless forced always on) is as follows: -+ * Check the first page we try to write in a block. -+ * - If the check passes then we don't need to check any more. -+ * - If the check fails, we check again... -+ * If the block has been erased, we don't need to check. -+ * -+ * However, if the block has been prioritised for gc, then -+ * we think there might be something odd about this block -+ * and stop using it. -+ * -+ * Rationale: -+ * We should only ever see chunks that have not been erased -+ * if there was a partially written chunk due to power loss -+ * This checking policy should catch that case with very -+ * few checks and thus save a lot of checks that are most likely not -+ * needed. -+ */ -+ -+ if(bi->gcPrioritise){ -+ yaffs_DeleteChunk(dev, chunk, 1, __LINE__); -+ } else { -+#ifdef CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED -+ -+ bi->skipErasedCheck = 0; -+ -+#endif -+ if(!bi->skipErasedCheck){ -+ erasedOk = yaffs_CheckChunkErased(dev, chunk); -+ if(erasedOk && !bi->gcPrioritise) -+ bi->skipErasedCheck = 1; -+ } -+ -+ if (!erasedOk) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>> yaffs chunk %d was not erased" -+ TENDSTR), chunk)); -+ } else { -+ writeOk = -+ yaffs_WriteChunkWithTagsToNAND(dev, chunk, -+ data, tags); -+ } -+ -+ attempts++; -+ -+ if (writeOk) { -+ /* -+ * Copy the data into the robustification buffer. -+ * NB We do this at the end to prevent duplicates in the case of a write error. -+ * Todo -+ */ -+ yaffs_HandleWriteChunkOk(dev, chunk, data, tags); -+ -+ } else { -+ /* The erased check or write failed */ -+ yaffs_HandleWriteChunkError(dev, chunk, erasedOk); -+ } -+ } -+ } -+ -+ } while (chunk >= 0 && !writeOk); -+ -+ if (attempts > 1) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("**>> yaffs write required %d attempts" TENDSTR), -+ attempts)); -+ dev->nRetriedWrites += (attempts - 1); -+ } -+ -+ return chunk; -+} -+ -+/* -+ * Block retiring for handling a broken block. -+ */ -+ -+static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND) -+{ -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND); -+ -+ yaffs_InvalidateCheckpoint(dev); -+ -+ yaffs_MarkBlockBad(dev, blockInNAND); -+ -+ bi->blockState = YAFFS_BLOCK_STATE_DEAD; -+ bi->gcPrioritise = 0; -+ bi->needsRetiring = 0; -+ -+ dev->nRetiredBlocks++; -+} -+ -+/* -+ * Functions for robustisizing TODO -+ * -+ */ -+ -+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND, -+ const __u8 * data, -+ const yaffs_ExtendedTags * tags) -+{ -+} -+ -+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND, -+ const yaffs_ExtendedTags * tags) -+{ -+} -+ -+void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi) -+{ -+ if(!bi->gcPrioritise){ -+ bi->gcPrioritise = 1; -+ dev->hasPendingPrioritisedGCs = 1; -+ bi->chunkErrorStrikes ++; -+ -+ if(bi->chunkErrorStrikes > 3){ -+ bi->needsRetiring = 1; /* Too many stikes, so retire this */ -+ T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Block struck out" TENDSTR))); -+ -+ } -+ -+ } -+} -+ -+static void yaffs_ReportOddballBlocks(yaffs_Device *dev) -+{ -+ int i; -+ -+ for(i = dev->internalStartBlock; i <= dev->internalEndBlock && (yaffs_traceMask & YAFFS_TRACE_BAD_BLOCKS); i++){ -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i); -+ if(bi->needsRetiring || bi->gcPrioritise) -+ T(YAFFS_TRACE_BAD_BLOCKS,(TSTR("yaffs block %d%s%s" TENDSTR), -+ i, -+ bi->needsRetiring ? " needs retiring" : "", -+ bi->gcPrioritise ? " gc prioritised" : "")); -+ -+ } -+} -+ -+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk) -+{ -+ -+ int blockInNAND = chunkInNAND / dev->nChunksPerBlock; -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND); -+ -+ yaffs_HandleChunkError(dev,bi); -+ -+ -+ if(erasedOk ) { -+ /* Was an actual write failure, so mark the block for retirement */ -+ bi->needsRetiring = 1; -+ T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS, -+ (TSTR("**>> Block %d needs retiring" TENDSTR), blockInNAND)); -+ -+ -+ } -+ -+ /* Delete the chunk */ -+ yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__); -+} -+ -+ -+/*---------------- Name handling functions ------------*/ -+ -+static __u16 yaffs_CalcNameSum(const YCHAR * name) -+{ -+ __u16 sum = 0; -+ __u16 i = 1; -+ -+ YUCHAR *bname = (YUCHAR *) name; -+ if (bname) { -+ while ((*bname) && (i <= YAFFS_MAX_NAME_LENGTH)) { -+ -+#ifdef CONFIG_YAFFS_CASE_INSENSITIVE -+ sum += yaffs_toupper(*bname) * i; -+#else -+ sum += (*bname) * i; -+#endif -+ i++; -+ bname++; -+ } -+ } -+ return sum; -+} -+ -+static void yaffs_SetObjectName(yaffs_Object * obj, const YCHAR * name) -+{ -+#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM -+ if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH) { -+ yaffs_strcpy(obj->shortName, name); -+ } else { -+ obj->shortName[0] = _Y('\0'); -+ } -+#endif -+ obj->sum = yaffs_CalcNameSum(name); -+} -+ -+/*-------------------- TNODES ------------------- -+ -+ * List of spare tnodes -+ * The list is hooked together using the first pointer -+ * in the tnode. -+ */ -+ -+/* yaffs_CreateTnodes creates a bunch more tnodes and -+ * adds them to the tnode free list. -+ * Don't use this function directly -+ */ -+ -+static int yaffs_CreateTnodes(yaffs_Device * dev, int nTnodes) -+{ -+ int i; -+ int tnodeSize; -+ yaffs_Tnode *newTnodes; -+ __u8 *mem; -+ yaffs_Tnode *curr; -+ yaffs_Tnode *next; -+ yaffs_TnodeList *tnl; -+ -+ if (nTnodes < 1) -+ return YAFFS_OK; -+ -+ /* Calculate the tnode size in bytes for variable width tnode support. -+ * Must be a multiple of 32-bits */ -+ tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8; -+ -+ /* make these things */ -+ -+ newTnodes = YMALLOC(nTnodes * tnodeSize); -+ mem = (__u8 *)newTnodes; -+ -+ if (!newTnodes) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("yaffs: Could not allocate Tnodes" TENDSTR))); -+ return YAFFS_FAIL; -+ } -+ -+ /* Hook them into the free list */ -+#if 0 -+ for (i = 0; i < nTnodes - 1; i++) { -+ newTnodes[i].internal[0] = &newTnodes[i + 1]; -+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG -+ newTnodes[i].internal[YAFFS_NTNODES_INTERNAL] = (void *)1; -+#endif -+ } -+ -+ newTnodes[nTnodes - 1].internal[0] = dev->freeTnodes; -+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG -+ newTnodes[nTnodes - 1].internal[YAFFS_NTNODES_INTERNAL] = (void *)1; -+#endif -+ dev->freeTnodes = newTnodes; -+#else -+ /* New hookup for wide tnodes */ -+ for(i = 0; i < nTnodes -1; i++) { -+ curr = (yaffs_Tnode *) &mem[i * tnodeSize]; -+ next = (yaffs_Tnode *) &mem[(i+1) * tnodeSize]; -+ curr->internal[0] = next; -+ } -+ -+ curr = (yaffs_Tnode *) &mem[(nTnodes - 1) * tnodeSize]; -+ curr->internal[0] = dev->freeTnodes; -+ dev->freeTnodes = (yaffs_Tnode *)mem; -+ -+#endif -+ -+ -+ dev->nFreeTnodes += nTnodes; -+ dev->nTnodesCreated += nTnodes; -+ -+ /* Now add this bunch of tnodes to a list for freeing up. -+ * NB If we can't add this to the management list it isn't fatal -+ * but it just means we can't free this bunch of tnodes later. -+ */ -+ -+ tnl = YMALLOC(sizeof(yaffs_TnodeList)); -+ if (!tnl) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("yaffs: Could not add tnodes to management list" TENDSTR))); -+ -+ } else { -+ tnl->tnodes = newTnodes; -+ tnl->next = dev->allocatedTnodeList; -+ dev->allocatedTnodeList = tnl; -+ } -+ -+ T(YAFFS_TRACE_ALLOCATE, (TSTR("yaffs: Tnodes added" TENDSTR))); -+ -+ return YAFFS_OK; -+} -+ -+/* GetTnode gets us a clean tnode. Tries to make allocate more if we run out */ -+ -+static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device * dev) -+{ -+ yaffs_Tnode *tn = NULL; -+ -+ /* If there are none left make more */ -+ if (!dev->freeTnodes) { -+ yaffs_CreateTnodes(dev, YAFFS_ALLOCATION_NTNODES); -+ } -+ -+ if (dev->freeTnodes) { -+ tn = dev->freeTnodes; -+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG -+ if (tn->internal[YAFFS_NTNODES_INTERNAL] != (void *)1) { -+ /* Hoosterman, this thing looks like it isn't in the list */ -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("yaffs: Tnode list bug 1" TENDSTR))); -+ } -+#endif -+ dev->freeTnodes = dev->freeTnodes->internal[0]; -+ dev->nFreeTnodes--; -+ } -+ -+ return tn; -+} -+ -+static yaffs_Tnode *yaffs_GetTnode(yaffs_Device * dev) -+{ -+ yaffs_Tnode *tn = yaffs_GetTnodeRaw(dev); -+ -+ if(tn) -+ memset(tn, 0, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8); -+ -+ return tn; -+} -+ -+/* FreeTnode frees up a tnode and puts it back on the free list */ -+static void yaffs_FreeTnode(yaffs_Device * dev, yaffs_Tnode * tn) -+{ -+ if (tn) { -+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG -+ if (tn->internal[YAFFS_NTNODES_INTERNAL] != 0) { -+ /* Hoosterman, this thing looks like it is already in the list */ -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("yaffs: Tnode list bug 2" TENDSTR))); -+ } -+ tn->internal[YAFFS_NTNODES_INTERNAL] = (void *)1; -+#endif -+ tn->internal[0] = dev->freeTnodes; -+ dev->freeTnodes = tn; -+ dev->nFreeTnodes++; -+ } -+} -+ -+static void yaffs_DeinitialiseTnodes(yaffs_Device * dev) -+{ -+ /* Free the list of allocated tnodes */ -+ yaffs_TnodeList *tmp; -+ -+ while (dev->allocatedTnodeList) { -+ tmp = dev->allocatedTnodeList->next; -+ -+ YFREE(dev->allocatedTnodeList->tnodes); -+ YFREE(dev->allocatedTnodeList); -+ dev->allocatedTnodeList = tmp; -+ -+ } -+ -+ dev->freeTnodes = NULL; -+ dev->nFreeTnodes = 0; -+} -+ -+static void yaffs_InitialiseTnodes(yaffs_Device * dev) -+{ -+ dev->allocatedTnodeList = NULL; -+ dev->freeTnodes = NULL; -+ dev->nFreeTnodes = 0; -+ dev->nTnodesCreated = 0; -+ -+} -+ -+ -+void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos, unsigned val) -+{ -+ __u32 *map = (__u32 *)tn; -+ __u32 bitInMap; -+ __u32 bitInWord; -+ __u32 wordInMap; -+ __u32 mask; -+ -+ pos &= YAFFS_TNODES_LEVEL0_MASK; -+ val >>= dev->chunkGroupBits; -+ -+ bitInMap = pos * dev->tnodeWidth; -+ wordInMap = bitInMap /32; -+ bitInWord = bitInMap & (32 -1); -+ -+ mask = dev->tnodeMask << bitInWord; -+ -+ map[wordInMap] &= ~mask; -+ map[wordInMap] |= (mask & (val << bitInWord)); -+ -+ if(dev->tnodeWidth > (32-bitInWord)) { -+ bitInWord = (32 - bitInWord); -+ wordInMap++;; -+ mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord); -+ map[wordInMap] &= ~mask; -+ map[wordInMap] |= (mask & (val >> bitInWord)); -+ } -+} -+ -+__u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos) -+{ -+ __u32 *map = (__u32 *)tn; -+ __u32 bitInMap; -+ __u32 bitInWord; -+ __u32 wordInMap; -+ __u32 val; -+ -+ pos &= YAFFS_TNODES_LEVEL0_MASK; -+ -+ bitInMap = pos * dev->tnodeWidth; -+ wordInMap = bitInMap /32; -+ bitInWord = bitInMap & (32 -1); -+ -+ val = map[wordInMap] >> bitInWord; -+ -+ if(dev->tnodeWidth > (32-bitInWord)) { -+ bitInWord = (32 - bitInWord); -+ wordInMap++;; -+ val |= (map[wordInMap] << bitInWord); -+ } -+ -+ val &= dev->tnodeMask; -+ val <<= dev->chunkGroupBits; -+ -+ return val; -+} -+ -+/* ------------------- End of individual tnode manipulation -----------------*/ -+ -+/* ---------Functions to manipulate the look-up tree (made up of tnodes) ------ -+ * The look up tree is represented by the top tnode and the number of topLevel -+ * in the tree. 0 means only the level 0 tnode is in the tree. -+ */ -+ -+/* FindLevel0Tnode finds the level 0 tnode, if one exists. */ -+static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev, -+ yaffs_FileStructure * fStruct, -+ __u32 chunkId) -+{ -+ -+ yaffs_Tnode *tn = fStruct->top; -+ __u32 i; -+ int requiredTallness; -+ int level = fStruct->topLevel; -+ -+ /* Check sane level and chunk Id */ -+ if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL) { -+ return NULL; -+ } -+ -+ if (chunkId > YAFFS_MAX_CHUNK_ID) { -+ return NULL; -+ } -+ -+ /* First check we're tall enough (ie enough topLevel) */ -+ -+ i = chunkId >> YAFFS_TNODES_LEVEL0_BITS; -+ requiredTallness = 0; -+ while (i) { -+ i >>= YAFFS_TNODES_INTERNAL_BITS; -+ requiredTallness++; -+ } -+ -+ if (requiredTallness > fStruct->topLevel) { -+ /* Not tall enough, so we can't find it, return NULL. */ -+ return NULL; -+ } -+ -+ /* Traverse down to level 0 */ -+ while (level > 0 && tn) { -+ tn = tn-> -+ internal[(chunkId >> -+ ( YAFFS_TNODES_LEVEL0_BITS + -+ (level - 1) * -+ YAFFS_TNODES_INTERNAL_BITS) -+ ) & -+ YAFFS_TNODES_INTERNAL_MASK]; -+ level--; -+ -+ } -+ -+ return tn; -+} -+ -+/* AddOrFindLevel0Tnode finds the level 0 tnode if it exists, otherwise first expands the tree. -+ * This happens in two steps: -+ * 1. If the tree isn't tall enough, then make it taller. -+ * 2. Scan down the tree towards the level 0 tnode adding tnodes if required. -+ * -+ * Used when modifying the tree. -+ * -+ * If the tn argument is NULL, then a fresh tnode will be added otherwise the specified tn will -+ * be plugged into the ttree. -+ */ -+ -+static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device * dev, -+ yaffs_FileStructure * fStruct, -+ __u32 chunkId, -+ yaffs_Tnode *passedTn) -+{ -+ -+ int requiredTallness; -+ int i; -+ int l; -+ yaffs_Tnode *tn; -+ -+ __u32 x; -+ -+ -+ /* Check sane level and page Id */ -+ if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL) { -+ return NULL; -+ } -+ -+ if (chunkId > YAFFS_MAX_CHUNK_ID) { -+ return NULL; -+ } -+ -+ /* First check we're tall enough (ie enough topLevel) */ -+ -+ x = chunkId >> YAFFS_TNODES_LEVEL0_BITS; -+ requiredTallness = 0; -+ while (x) { -+ x >>= YAFFS_TNODES_INTERNAL_BITS; -+ requiredTallness++; -+ } -+ -+ -+ if (requiredTallness > fStruct->topLevel) { -+ /* Not tall enough,gotta make the tree taller */ -+ for (i = fStruct->topLevel; i < requiredTallness; i++) { -+ -+ tn = yaffs_GetTnode(dev); -+ -+ if (tn) { -+ tn->internal[0] = fStruct->top; -+ fStruct->top = tn; -+ } else { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("yaffs: no more tnodes" TENDSTR))); -+ } -+ } -+ -+ fStruct->topLevel = requiredTallness; -+ } -+ -+ /* Traverse down to level 0, adding anything we need */ -+ -+ l = fStruct->topLevel; -+ tn = fStruct->top; -+ -+ if(l > 0) { -+ while (l > 0 && tn) { -+ x = (chunkId >> -+ ( YAFFS_TNODES_LEVEL0_BITS + -+ (l - 1) * YAFFS_TNODES_INTERNAL_BITS)) & -+ YAFFS_TNODES_INTERNAL_MASK; -+ -+ -+ if((l>1) && !tn->internal[x]){ -+ /* Add missing non-level-zero tnode */ -+ tn->internal[x] = yaffs_GetTnode(dev); -+ -+ } else if(l == 1) { -+ /* Looking from level 1 at level 0 */ -+ if (passedTn) { -+ /* If we already have one, then release it.*/ -+ if(tn->internal[x]) -+ yaffs_FreeTnode(dev,tn->internal[x]); -+ tn->internal[x] = passedTn; -+ -+ } else if(!tn->internal[x]) { -+ /* Don't have one, none passed in */ -+ tn->internal[x] = yaffs_GetTnode(dev); -+ } -+ } -+ -+ tn = tn->internal[x]; -+ l--; -+ } -+ } else { -+ /* top is level 0 */ -+ if(passedTn) { -+ memcpy(tn,passedTn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8); -+ yaffs_FreeTnode(dev,passedTn); -+ } -+ } -+ -+ return tn; -+} -+ -+static int yaffs_FindChunkInGroup(yaffs_Device * dev, int theChunk, -+ yaffs_ExtendedTags * tags, int objectId, -+ int chunkInInode) -+{ -+ int j; -+ -+ for (j = 0; theChunk && j < dev->chunkGroupSize; j++) { -+ if (yaffs_CheckChunkBit -+ (dev, theChunk / dev->nChunksPerBlock, -+ theChunk % dev->nChunksPerBlock)) { -+ yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, -+ tags); -+ if (yaffs_TagsMatch(tags, objectId, chunkInInode)) { -+ /* found it; */ -+ return theChunk; -+ -+ } -+ } -+ theChunk++; -+ } -+ return -1; -+} -+ -+ -+/* DeleteWorker scans backwards through the tnode tree and deletes all the -+ * chunks and tnodes in the file -+ * Returns 1 if the tree was deleted. -+ * Returns 0 if it stopped early due to hitting the limit and the delete is incomplete. -+ */ -+ -+static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level, -+ int chunkOffset, int *limit) -+{ -+ int i; -+ int chunkInInode; -+ int theChunk; -+ yaffs_ExtendedTags tags; -+ int foundChunk; -+ yaffs_Device *dev = in->myDev; -+ -+ int allDone = 1; -+ -+ if (tn) { -+ if (level > 0) { -+ -+ for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0; -+ i--) { -+ if (tn->internal[i]) { -+ if (limit && (*limit) < 0) { -+ allDone = 0; -+ } else { -+ allDone = -+ yaffs_DeleteWorker(in, -+ tn-> -+ internal -+ [i], -+ level - -+ 1, -+ (chunkOffset -+ << -+ YAFFS_TNODES_INTERNAL_BITS) -+ + i, -+ limit); -+ } -+ if (allDone) { -+ yaffs_FreeTnode(dev, -+ tn-> -+ internal[i]); -+ tn->internal[i] = NULL; -+ } -+ } -+ -+ } -+ return (allDone) ? 1 : 0; -+ } else if (level == 0) { -+ int hitLimit = 0; -+ -+ for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0 && !hitLimit; -+ i--) { -+ theChunk = yaffs_GetChunkGroupBase(dev,tn,i); -+ if (theChunk) { -+ -+ chunkInInode = -+ (chunkOffset << -+ YAFFS_TNODES_LEVEL0_BITS) + i; -+ -+ foundChunk = -+ yaffs_FindChunkInGroup(dev, -+ theChunk, -+ &tags, -+ in->objectId, -+ chunkInInode); -+ -+ if (foundChunk > 0) { -+ yaffs_DeleteChunk(dev, -+ foundChunk, 1, -+ __LINE__); -+ in->nDataChunks--; -+ if (limit) { -+ *limit = *limit - 1; -+ if (*limit <= 0) { -+ hitLimit = 1; -+ } -+ } -+ -+ } -+ -+ yaffs_PutLevel0Tnode(dev,tn,i,0); -+ } -+ -+ } -+ return (i < 0) ? 1 : 0; -+ -+ } -+ -+ } -+ -+ return 1; -+ -+} -+ -+static void yaffs_SoftDeleteChunk(yaffs_Device * dev, int chunk) -+{ -+ -+ yaffs_BlockInfo *theBlock; -+ -+ T(YAFFS_TRACE_DELETION, (TSTR("soft delete chunk %d" TENDSTR), chunk)); -+ -+ theBlock = yaffs_GetBlockInfo(dev, chunk / dev->nChunksPerBlock); -+ if (theBlock) { -+ theBlock->softDeletions++; -+ dev->nFreeChunks++; -+ } -+} -+ -+/* SoftDeleteWorker scans backwards through the tnode tree and soft deletes all the chunks in the file. -+ * All soft deleting does is increment the block's softdelete count and pulls the chunk out -+ * of the tnode. -+ * Thus, essentially this is the same as DeleteWorker except that the chunks are soft deleted. -+ */ -+ -+static int yaffs_SoftDeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, -+ __u32 level, int chunkOffset) -+{ -+ int i; -+ int theChunk; -+ int allDone = 1; -+ yaffs_Device *dev = in->myDev; -+ -+ if (tn) { -+ if (level > 0) { -+ -+ for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0; -+ i--) { -+ if (tn->internal[i]) { -+ allDone = -+ yaffs_SoftDeleteWorker(in, -+ tn-> -+ internal[i], -+ level - 1, -+ (chunkOffset -+ << -+ YAFFS_TNODES_INTERNAL_BITS) -+ + i); -+ if (allDone) { -+ yaffs_FreeTnode(dev, -+ tn-> -+ internal[i]); -+ tn->internal[i] = NULL; -+ } else { -+ /* Hoosterman... how could this happen? */ -+ } -+ } -+ } -+ return (allDone) ? 1 : 0; -+ } else if (level == 0) { -+ -+ for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0; i--) { -+ theChunk = yaffs_GetChunkGroupBase(dev,tn,i); -+ if (theChunk) { -+ /* Note this does not find the real chunk, only the chunk group. -+ * We make an assumption that a chunk group is not larger than -+ * a block. -+ */ -+ yaffs_SoftDeleteChunk(dev, theChunk); -+ yaffs_PutLevel0Tnode(dev,tn,i,0); -+ } -+ -+ } -+ return 1; -+ -+ } -+ -+ } -+ -+ return 1; -+ -+} -+ -+static void yaffs_SoftDeleteFile(yaffs_Object * obj) -+{ -+ if (obj->deleted && -+ obj->variantType == YAFFS_OBJECT_TYPE_FILE && !obj->softDeleted) { -+ if (obj->nDataChunks <= 0) { -+ /* Empty file with no duplicate object headers, just delete it immediately */ -+ yaffs_FreeTnode(obj->myDev, -+ obj->variant.fileVariant.top); -+ obj->variant.fileVariant.top = NULL; -+ T(YAFFS_TRACE_TRACING, -+ (TSTR("yaffs: Deleting empty file %d" TENDSTR), -+ obj->objectId)); -+ yaffs_DoGenericObjectDeletion(obj); -+ } else { -+ yaffs_SoftDeleteWorker(obj, -+ obj->variant.fileVariant.top, -+ obj->variant.fileVariant. -+ topLevel, 0); -+ obj->softDeleted = 1; -+ } -+ } -+} -+ -+/* Pruning removes any part of the file structure tree that is beyond the -+ * bounds of the file (ie that does not point to chunks). -+ * -+ * A file should only get pruned when its size is reduced. -+ * -+ * Before pruning, the chunks must be pulled from the tree and the -+ * level 0 tnode entries must be zeroed out. -+ * Could also use this for file deletion, but that's probably better handled -+ * by a special case. -+ */ -+ -+static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device * dev, yaffs_Tnode * tn, -+ __u32 level, int del0) -+{ -+ int i; -+ int hasData; -+ -+ if (tn) { -+ hasData = 0; -+ -+ for (i = 0; i < YAFFS_NTNODES_INTERNAL; i++) { -+ if (tn->internal[i] && level > 0) { -+ tn->internal[i] = -+ yaffs_PruneWorker(dev, tn->internal[i], -+ level - 1, -+ (i == 0) ? del0 : 1); -+ } -+ -+ if (tn->internal[i]) { -+ hasData++; -+ } -+ } -+ -+ if (hasData == 0 && del0) { -+ /* Free and return NULL */ -+ -+ yaffs_FreeTnode(dev, tn); -+ tn = NULL; -+ } -+ -+ } -+ -+ return tn; -+ -+} -+ -+static int yaffs_PruneFileStructure(yaffs_Device * dev, -+ yaffs_FileStructure * fStruct) -+{ -+ int i; -+ int hasData; -+ int done = 0; -+ yaffs_Tnode *tn; -+ -+ if (fStruct->topLevel > 0) { -+ fStruct->top = -+ yaffs_PruneWorker(dev, fStruct->top, fStruct->topLevel, 0); -+ -+ /* Now we have a tree with all the non-zero branches NULL but the height -+ * is the same as it was. -+ * Let's see if we can trim internal tnodes to shorten the tree. -+ * We can do this if only the 0th element in the tnode is in use -+ * (ie all the non-zero are NULL) -+ */ -+ -+ while (fStruct->topLevel && !done) { -+ tn = fStruct->top; -+ -+ hasData = 0; -+ for (i = 1; i < YAFFS_NTNODES_INTERNAL; i++) { -+ if (tn->internal[i]) { -+ hasData++; -+ } -+ } -+ -+ if (!hasData) { -+ fStruct->top = tn->internal[0]; -+ fStruct->topLevel--; -+ yaffs_FreeTnode(dev, tn); -+ } else { -+ done = 1; -+ } -+ } -+ } -+ -+ return YAFFS_OK; -+} -+ -+/*-------------------- End of File Structure functions.-------------------*/ -+ -+/* yaffs_CreateFreeObjects creates a bunch more objects and -+ * adds them to the object free list. -+ */ -+static int yaffs_CreateFreeObjects(yaffs_Device * dev, int nObjects) -+{ -+ int i; -+ yaffs_Object *newObjects; -+ yaffs_ObjectList *list; -+ -+ if (nObjects < 1) -+ return YAFFS_OK; -+ -+ /* make these things */ -+ newObjects = YMALLOC(nObjects * sizeof(yaffs_Object)); -+ -+ if (!newObjects) { -+ T(YAFFS_TRACE_ALLOCATE, -+ (TSTR("yaffs: Could not allocate more objects" TENDSTR))); -+ return YAFFS_FAIL; -+ } -+ -+ /* Hook them into the free list */ -+ for (i = 0; i < nObjects - 1; i++) { -+ newObjects[i].siblings.next = -+ (struct list_head *)(&newObjects[i + 1]); -+ } -+ -+ newObjects[nObjects - 1].siblings.next = (void *)dev->freeObjects; -+ dev->freeObjects = newObjects; -+ dev->nFreeObjects += nObjects; -+ dev->nObjectsCreated += nObjects; -+ -+ /* Now add this bunch of Objects to a list for freeing up. */ -+ -+ list = YMALLOC(sizeof(yaffs_ObjectList)); -+ if (!list) { -+ T(YAFFS_TRACE_ALLOCATE, -+ (TSTR("Could not add objects to management list" TENDSTR))); -+ } else { -+ list->objects = newObjects; -+ list->next = dev->allocatedObjectList; -+ dev->allocatedObjectList = list; -+ } -+ -+ return YAFFS_OK; -+} -+ -+ -+/* AllocateEmptyObject gets us a clean Object. Tries to make allocate more if we run out */ -+static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device * dev) -+{ -+ yaffs_Object *tn = NULL; -+ -+ /* If there are none left make more */ -+ if (!dev->freeObjects) { -+ yaffs_CreateFreeObjects(dev, YAFFS_ALLOCATION_NOBJECTS); -+ } -+ -+ if (dev->freeObjects) { -+ tn = dev->freeObjects; -+ dev->freeObjects = -+ (yaffs_Object *) (dev->freeObjects->siblings.next); -+ dev->nFreeObjects--; -+ -+ /* Now sweeten it up... */ -+ -+ memset(tn, 0, sizeof(yaffs_Object)); -+ tn->myDev = dev; -+ tn->chunkId = -1; -+ tn->variantType = YAFFS_OBJECT_TYPE_UNKNOWN; -+ INIT_LIST_HEAD(&(tn->hardLinks)); -+ INIT_LIST_HEAD(&(tn->hashLink)); -+ INIT_LIST_HEAD(&tn->siblings); -+ -+ /* Add it to the lost and found directory. -+ * NB Can't put root or lostNFound in lostNFound so -+ * check if lostNFound exists first -+ */ -+ if (dev->lostNFoundDir) { -+ yaffs_AddObjectToDirectory(dev->lostNFoundDir, tn); -+ } -+ } -+ -+ return tn; -+} -+ -+static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device * dev, int number, -+ __u32 mode) -+{ -+ -+ yaffs_Object *obj = -+ yaffs_CreateNewObject(dev, number, YAFFS_OBJECT_TYPE_DIRECTORY); -+ if (obj) { -+ obj->fake = 1; /* it is fake so it has no NAND presence... */ -+ obj->renameAllowed = 0; /* ... and we're not allowed to rename it... */ -+ obj->unlinkAllowed = 0; /* ... or unlink it */ -+ obj->deleted = 0; -+ obj->unlinked = 0; -+ obj->yst_mode = mode; -+ obj->myDev = dev; -+ obj->chunkId = 0; /* Not a valid chunk. */ -+ } -+ -+ return obj; -+ -+} -+ -+static void yaffs_UnhashObject(yaffs_Object * tn) -+{ -+ int bucket; -+ yaffs_Device *dev = tn->myDev; -+ -+ /* If it is still linked into the bucket list, free from the list */ -+ if (!list_empty(&tn->hashLink)) { -+ list_del_init(&tn->hashLink); -+ bucket = yaffs_HashFunction(tn->objectId); -+ dev->objectBucket[bucket].count--; -+ } -+ -+} -+ -+/* FreeObject frees up a Object and puts it back on the free list */ -+static void yaffs_FreeObject(yaffs_Object * tn) -+{ -+ -+ yaffs_Device *dev = tn->myDev; -+ -+#ifdef __KERNEL__ -+ if (tn->myInode) { -+ /* We're still hooked up to a cached inode. -+ * Don't delete now, but mark for later deletion -+ */ -+ tn->deferedFree = 1; -+ return; -+ } -+#endif -+ -+ yaffs_UnhashObject(tn); -+ -+ /* Link into the free list. */ -+ tn->siblings.next = (struct list_head *)(dev->freeObjects); -+ dev->freeObjects = tn; -+ dev->nFreeObjects++; -+} -+ -+#ifdef __KERNEL__ -+ -+void yaffs_HandleDeferedFree(yaffs_Object * obj) -+{ -+ if (obj->deferedFree) { -+ yaffs_FreeObject(obj); -+ } -+} -+ -+#endif -+ -+static void yaffs_DeinitialiseObjects(yaffs_Device * dev) -+{ -+ /* Free the list of allocated Objects */ -+ -+ yaffs_ObjectList *tmp; -+ -+ while (dev->allocatedObjectList) { -+ tmp = dev->allocatedObjectList->next; -+ YFREE(dev->allocatedObjectList->objects); -+ YFREE(dev->allocatedObjectList); -+ -+ dev->allocatedObjectList = tmp; -+ } -+ -+ dev->freeObjects = NULL; -+ dev->nFreeObjects = 0; -+} -+ -+static void yaffs_InitialiseObjects(yaffs_Device * dev) -+{ -+ int i; -+ -+ dev->allocatedObjectList = NULL; -+ dev->freeObjects = NULL; -+ dev->nFreeObjects = 0; -+ -+ for (i = 0; i < YAFFS_NOBJECT_BUCKETS; i++) { -+ INIT_LIST_HEAD(&dev->objectBucket[i].list); -+ dev->objectBucket[i].count = 0; -+ } -+ -+} -+ -+static int yaffs_FindNiceObjectBucket(yaffs_Device * dev) -+{ -+ static int x = 0; -+ int i; -+ int l = 999; -+ int lowest = 999999; -+ -+ /* First let's see if we can find one that's empty. */ -+ -+ for (i = 0; i < 10 && lowest > 0; i++) { -+ x++; -+ x %= YAFFS_NOBJECT_BUCKETS; -+ if (dev->objectBucket[x].count < lowest) { -+ lowest = dev->objectBucket[x].count; -+ l = x; -+ } -+ -+ } -+ -+ /* If we didn't find an empty list, then try -+ * looking a bit further for a short one -+ */ -+ -+ for (i = 0; i < 10 && lowest > 3; i++) { -+ x++; -+ x %= YAFFS_NOBJECT_BUCKETS; -+ if (dev->objectBucket[x].count < lowest) { -+ lowest = dev->objectBucket[x].count; -+ l = x; -+ } -+ -+ } -+ -+ return l; -+} -+ -+static int yaffs_CreateNewObjectNumber(yaffs_Device * dev) -+{ -+ int bucket = yaffs_FindNiceObjectBucket(dev); -+ -+ /* Now find an object value that has not already been taken -+ * by scanning the list. -+ */ -+ -+ int found = 0; -+ struct list_head *i; -+ -+ __u32 n = (__u32) bucket; -+ -+ /* yaffs_CheckObjectHashSanity(); */ -+ -+ while (!found) { -+ found = 1; -+ n += YAFFS_NOBJECT_BUCKETS; -+ if (1 || dev->objectBucket[bucket].count > 0) { -+ list_for_each(i, &dev->objectBucket[bucket].list) { -+ /* If there is already one in the list */ -+ if (i -+ && list_entry(i, yaffs_Object, -+ hashLink)->objectId == n) { -+ found = 0; -+ } -+ } -+ } -+ } -+ -+ -+ return n; -+} -+ -+static void yaffs_HashObject(yaffs_Object * in) -+{ -+ int bucket = yaffs_HashFunction(in->objectId); -+ yaffs_Device *dev = in->myDev; -+ -+ list_add(&in->hashLink, &dev->objectBucket[bucket].list); -+ dev->objectBucket[bucket].count++; -+ -+} -+ -+yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number) -+{ -+ int bucket = yaffs_HashFunction(number); -+ struct list_head *i; -+ yaffs_Object *in; -+ -+ list_for_each(i, &dev->objectBucket[bucket].list) { -+ /* Look if it is in the list */ -+ if (i) { -+ in = list_entry(i, yaffs_Object, hashLink); -+ if (in->objectId == number) { -+#ifdef __KERNEL__ -+ /* Don't tell the VFS about this one if it is defered free */ -+ if (in->deferedFree) -+ return NULL; -+#endif -+ -+ return in; -+ } -+ } -+ } -+ -+ return NULL; -+} -+ -+yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number, -+ yaffs_ObjectType type) -+{ -+ -+ yaffs_Object *theObject; -+ -+ if (number < 0) { -+ number = yaffs_CreateNewObjectNumber(dev); -+ } -+ -+ theObject = yaffs_AllocateEmptyObject(dev); -+ -+ if (theObject) { -+ theObject->fake = 0; -+ theObject->renameAllowed = 1; -+ theObject->unlinkAllowed = 1; -+ theObject->objectId = number; -+ yaffs_HashObject(theObject); -+ theObject->variantType = type; -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_WinFileTimeNow(theObject->win_atime); -+ theObject->win_ctime[0] = theObject->win_mtime[0] = -+ theObject->win_atime[0]; -+ theObject->win_ctime[1] = theObject->win_mtime[1] = -+ theObject->win_atime[1]; -+ -+#else -+ -+ theObject->yst_atime = theObject->yst_mtime = -+ theObject->yst_ctime = Y_CURRENT_TIME; -+#endif -+ switch (type) { -+ case YAFFS_OBJECT_TYPE_FILE: -+ theObject->variant.fileVariant.fileSize = 0; -+ theObject->variant.fileVariant.scannedFileSize = 0; -+ theObject->variant.fileVariant.shrinkSize = 0xFFFFFFFF; /* max __u32 */ -+ theObject->variant.fileVariant.topLevel = 0; -+ theObject->variant.fileVariant.top = -+ yaffs_GetTnode(dev); -+ break; -+ case YAFFS_OBJECT_TYPE_DIRECTORY: -+ INIT_LIST_HEAD(&theObject->variant.directoryVariant. -+ children); -+ break; -+ case YAFFS_OBJECT_TYPE_SYMLINK: -+ case YAFFS_OBJECT_TYPE_HARDLINK: -+ case YAFFS_OBJECT_TYPE_SPECIAL: -+ /* No action required */ -+ break; -+ case YAFFS_OBJECT_TYPE_UNKNOWN: -+ /* todo this should not happen */ -+ break; -+ } -+ } -+ -+ return theObject; -+} -+ -+static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device * dev, -+ int number, -+ yaffs_ObjectType type) -+{ -+ yaffs_Object *theObject = NULL; -+ -+ if (number > 0) { -+ theObject = yaffs_FindObjectByNumber(dev, number); -+ } -+ -+ if (!theObject) { -+ theObject = yaffs_CreateNewObject(dev, number, type); -+ } -+ -+ return theObject; -+ -+} -+ -+ -+static YCHAR *yaffs_CloneString(const YCHAR * str) -+{ -+ YCHAR *newStr = NULL; -+ -+ if (str && *str) { -+ newStr = YMALLOC((yaffs_strlen(str) + 1) * sizeof(YCHAR)); -+ yaffs_strcpy(newStr, str); -+ } -+ -+ return newStr; -+ -+} -+ -+/* -+ * Mknod (create) a new object. -+ * equivalentObject only has meaning for a hard link; -+ * aliasString only has meaning for a sumlink. -+ * rdev only has meaning for devices (a subset of special objects) -+ */ -+ -+static yaffs_Object *yaffs_MknodObject(yaffs_ObjectType type, -+ yaffs_Object * parent, -+ const YCHAR * name, -+ __u32 mode, -+ __u32 uid, -+ __u32 gid, -+ yaffs_Object * equivalentObject, -+ const YCHAR * aliasString, __u32 rdev) -+{ -+ yaffs_Object *in; -+ -+ yaffs_Device *dev = parent->myDev; -+ -+ /* Check if the entry exists. If it does then fail the call since we don't want a dup.*/ -+ if (yaffs_FindObjectByName(parent, name)) { -+ return NULL; -+ } -+ -+ in = yaffs_CreateNewObject(dev, -1, type); -+ -+ if (in) { -+ in->chunkId = -1; -+ in->valid = 1; -+ in->variantType = type; -+ -+ in->yst_mode = mode; -+ -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_WinFileTimeNow(in->win_atime); -+ in->win_ctime[0] = in->win_mtime[0] = in->win_atime[0]; -+ in->win_ctime[1] = in->win_mtime[1] = in->win_atime[1]; -+ -+#else -+ in->yst_atime = in->yst_mtime = in->yst_ctime = Y_CURRENT_TIME; -+ -+ in->yst_rdev = rdev; -+ in->yst_uid = uid; -+ in->yst_gid = gid; -+#endif -+ in->nDataChunks = 0; -+ -+ yaffs_SetObjectName(in, name); -+ in->dirty = 1; -+ -+ yaffs_AddObjectToDirectory(parent, in); -+ -+ in->myDev = parent->myDev; -+ -+ switch (type) { -+ case YAFFS_OBJECT_TYPE_SYMLINK: -+ in->variant.symLinkVariant.alias = -+ yaffs_CloneString(aliasString); -+ break; -+ case YAFFS_OBJECT_TYPE_HARDLINK: -+ in->variant.hardLinkVariant.equivalentObject = -+ equivalentObject; -+ in->variant.hardLinkVariant.equivalentObjectId = -+ equivalentObject->objectId; -+ list_add(&in->hardLinks, &equivalentObject->hardLinks); -+ break; -+ case YAFFS_OBJECT_TYPE_FILE: -+ case YAFFS_OBJECT_TYPE_DIRECTORY: -+ case YAFFS_OBJECT_TYPE_SPECIAL: -+ case YAFFS_OBJECT_TYPE_UNKNOWN: -+ /* do nothing */ -+ break; -+ } -+ -+ if (yaffs_UpdateObjectHeader(in, name, 0, 0, 0) < 0) { -+ /* Could not create the object header, fail the creation */ -+ yaffs_DestroyObject(in); -+ in = NULL; -+ } -+ -+ } -+ -+ return in; -+} -+ -+yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name, -+ __u32 mode, __u32 uid, __u32 gid) -+{ -+ return yaffs_MknodObject(YAFFS_OBJECT_TYPE_FILE, parent, name, mode, -+ uid, gid, NULL, NULL, 0); -+} -+ -+yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name, -+ __u32 mode, __u32 uid, __u32 gid) -+{ -+ return yaffs_MknodObject(YAFFS_OBJECT_TYPE_DIRECTORY, parent, name, -+ mode, uid, gid, NULL, NULL, 0); -+} -+ -+yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name, -+ __u32 mode, __u32 uid, __u32 gid, __u32 rdev) -+{ -+ return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SPECIAL, parent, name, mode, -+ uid, gid, NULL, NULL, rdev); -+} -+ -+yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name, -+ __u32 mode, __u32 uid, __u32 gid, -+ const YCHAR * alias) -+{ -+ return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SYMLINK, parent, name, mode, -+ uid, gid, NULL, alias, 0); -+} -+ -+/* yaffs_Link returns the object id of the equivalent object.*/ -+yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name, -+ yaffs_Object * equivalentObject) -+{ -+ /* Get the real object in case we were fed a hard link as an equivalent object */ -+ equivalentObject = yaffs_GetEquivalentObject(equivalentObject); -+ -+ if (yaffs_MknodObject -+ (YAFFS_OBJECT_TYPE_HARDLINK, parent, name, 0, 0, 0, -+ equivalentObject, NULL, 0)) { -+ return equivalentObject; -+ } else { -+ return NULL; -+ } -+ -+} -+ -+static int yaffs_ChangeObjectName(yaffs_Object * obj, yaffs_Object * newDir, -+ const YCHAR * newName, int force, int shadows) -+{ -+ int unlinkOp; -+ int deleteOp; -+ -+ yaffs_Object *existingTarget; -+ -+ if (newDir == NULL) { -+ newDir = obj->parent; /* use the old directory */ -+ } -+ -+ if (newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("tragendy: yaffs_ChangeObjectName: newDir is not a directory" -+ TENDSTR))); -+ YBUG(); -+ } -+ -+ /* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */ -+ if (obj->myDev->isYaffs2) { -+ unlinkOp = (newDir == obj->myDev->unlinkedDir); -+ } else { -+ unlinkOp = (newDir == obj->myDev->unlinkedDir -+ && obj->variantType == YAFFS_OBJECT_TYPE_FILE); -+ } -+ -+ deleteOp = (newDir == obj->myDev->deletedDir); -+ -+ existingTarget = yaffs_FindObjectByName(newDir, newName); -+ -+ /* If the object is a file going into the unlinked directory, -+ * then it is OK to just stuff it in since duplicate names are allowed. -+ * else only proceed if the new name does not exist and if we're putting -+ * it into a directory. -+ */ -+ if ((unlinkOp || -+ deleteOp || -+ force || -+ (shadows > 0) || -+ !existingTarget) && -+ newDir->variantType == YAFFS_OBJECT_TYPE_DIRECTORY) { -+ yaffs_SetObjectName(obj, newName); -+ obj->dirty = 1; -+ -+ yaffs_AddObjectToDirectory(newDir, obj); -+ -+ if (unlinkOp) -+ obj->unlinked = 1; -+ -+ /* If it is a deletion then we mark it as a shrink for gc purposes. */ -+ if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows)>= 0) -+ return YAFFS_OK; -+ } -+ -+ return YAFFS_FAIL; -+} -+ -+int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName, -+ yaffs_Object * newDir, const YCHAR * newName) -+{ -+ yaffs_Object *obj; -+ yaffs_Object *existingTarget; -+ int force = 0; -+ -+#ifdef CONFIG_YAFFS_CASE_INSENSITIVE -+ /* Special case for case insemsitive systems (eg. WinCE). -+ * While look-up is case insensitive, the name isn't. -+ * Therefore we might want to change x.txt to X.txt -+ */ -+ if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0) { -+ force = 1; -+ } -+#endif -+ -+ obj = yaffs_FindObjectByName(oldDir, oldName); -+ /* Check new name to long. */ -+ if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK && -+ yaffs_strlen(newName) > YAFFS_MAX_ALIAS_LENGTH) -+ /* ENAMETOOLONG */ -+ return YAFFS_FAIL; -+ else if (obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK && -+ yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH) -+ /* ENAMETOOLONG */ -+ return YAFFS_FAIL; -+ -+ if (obj && obj->renameAllowed) { -+ -+ /* Now do the handling for an existing target, if there is one */ -+ -+ existingTarget = yaffs_FindObjectByName(newDir, newName); -+ if (existingTarget && -+ existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY && -+ !list_empty(&existingTarget->variant.directoryVariant.children)) { -+ /* There is a target that is a non-empty directory, so we fail */ -+ return YAFFS_FAIL; /* EEXIST or ENOTEMPTY */ -+ } else if (existingTarget && existingTarget != obj) { -+ /* Nuke the target first, using shadowing, -+ * but only if it isn't the same object -+ */ -+ yaffs_ChangeObjectName(obj, newDir, newName, force, -+ existingTarget->objectId); -+ yaffs_UnlinkObject(existingTarget); -+ } -+ -+ return yaffs_ChangeObjectName(obj, newDir, newName, 1, 0); -+ } -+ return YAFFS_FAIL; -+} -+ -+/*------------------------- Block Management and Page Allocation ----------------*/ -+ -+static int yaffs_InitialiseBlocks(yaffs_Device * dev) -+{ -+ int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1; -+ -+ dev->allocationBlock = -1; /* force it to get a new one */ -+ -+ /* Todo we're assuming the malloc will pass. */ -+ dev->blockInfo = YMALLOC(nBlocks * sizeof(yaffs_BlockInfo)); -+ if(!dev->blockInfo){ -+ dev->blockInfo = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockInfo)); -+ dev->blockInfoAlt = 1; -+ } -+ else -+ dev->blockInfoAlt = 0; -+ -+ /* Set up dynamic blockinfo stuff. */ -+ dev->chunkBitmapStride = (dev->nChunksPerBlock + 7) / 8; /* round up bytes */ -+ dev->chunkBits = YMALLOC(dev->chunkBitmapStride * nBlocks); -+ if(!dev->chunkBits){ -+ dev->chunkBits = YMALLOC_ALT(dev->chunkBitmapStride * nBlocks); -+ dev->chunkBitsAlt = 1; -+ } -+ else -+ dev->chunkBitsAlt = 0; -+ -+ if (dev->blockInfo && dev->chunkBits) { -+ memset(dev->blockInfo, 0, nBlocks * sizeof(yaffs_BlockInfo)); -+ memset(dev->chunkBits, 0, dev->chunkBitmapStride * nBlocks); -+ return YAFFS_OK; -+ } -+ -+ return YAFFS_FAIL; -+ -+} -+ -+static void yaffs_DeinitialiseBlocks(yaffs_Device * dev) -+{ -+ if(dev->blockInfoAlt) -+ YFREE_ALT(dev->blockInfo); -+ else -+ YFREE(dev->blockInfo); -+ dev->blockInfoAlt = 0; -+ -+ dev->blockInfo = NULL; -+ -+ if(dev->chunkBitsAlt) -+ YFREE_ALT(dev->chunkBits); -+ else -+ YFREE(dev->chunkBits); -+ dev->chunkBitsAlt = 0; -+ dev->chunkBits = NULL; -+} -+ -+static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device * dev, -+ yaffs_BlockInfo * bi) -+{ -+ int i; -+ __u32 seq; -+ yaffs_BlockInfo *b; -+ -+ if (!dev->isYaffs2) -+ return 1; /* disqualification only applies to yaffs2. */ -+ -+ if (!bi->hasShrinkHeader) -+ return 1; /* can gc */ -+ -+ /* Find the oldest dirty sequence number if we don't know it and save it -+ * so we don't have to keep recomputing it. -+ */ -+ if (!dev->oldestDirtySequence) { -+ seq = dev->sequenceNumber; -+ -+ for (i = dev->internalStartBlock; i <= dev->internalEndBlock; -+ i++) { -+ b = yaffs_GetBlockInfo(dev, i); -+ if (b->blockState == YAFFS_BLOCK_STATE_FULL && -+ (b->pagesInUse - b->softDeletions) < -+ dev->nChunksPerBlock && b->sequenceNumber < seq) { -+ seq = b->sequenceNumber; -+ } -+ } -+ dev->oldestDirtySequence = seq; -+ } -+ -+ /* Can't do gc of this block if there are any blocks older than this one that have -+ * discarded pages. -+ */ -+ return (bi->sequenceNumber <= dev->oldestDirtySequence); -+ -+} -+ -+/* FindDiretiestBlock is used to select the dirtiest block (or close enough) -+ * for garbage collection. -+ */ -+ -+static int yaffs_FindBlockForGarbageCollection(yaffs_Device * dev, -+ int aggressive) -+{ -+ -+ int b = dev->currentDirtyChecker; -+ -+ int i; -+ int iterations; -+ int dirtiest = -1; -+ int pagesInUse; -+ int prioritised=0; -+ yaffs_BlockInfo *bi; -+ static int nonAggressiveSkip = 0; -+ int pendingPrioritisedExist = 0; -+ -+ /* First let's see if we need to grab a prioritised block */ -+ if(dev->hasPendingPrioritisedGCs){ -+ for(i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++){ -+ -+ bi = yaffs_GetBlockInfo(dev, i); -+ if(bi->gcPrioritise) { -+ pendingPrioritisedExist = 1; -+ if(bi->blockState == YAFFS_BLOCK_STATE_FULL && -+ yaffs_BlockNotDisqualifiedFromGC(dev, bi)){ -+ pagesInUse = (bi->pagesInUse - bi->softDeletions); -+ dirtiest = i; -+ prioritised = 1; -+ aggressive = 1; /* Fool the non-aggressive skip logiv below */ -+ } -+ } -+ } -+ -+ if(!pendingPrioritisedExist) /* None found, so we can clear this */ -+ dev->hasPendingPrioritisedGCs = 0; -+ } -+ -+ /* If we're doing aggressive GC then we are happy to take a less-dirty block, and -+ * search harder. -+ * else (we're doing a leasurely gc), then we only bother to do this if the -+ * block has only a few pages in use. -+ */ -+ -+ nonAggressiveSkip--; -+ -+ if (!aggressive && (nonAggressiveSkip > 0)) { -+ return -1; -+ } -+ -+ if(!prioritised) -+ pagesInUse = -+ (aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1; -+ -+ if (aggressive) { -+ iterations = -+ dev->internalEndBlock - dev->internalStartBlock + 1; -+ } else { -+ iterations = -+ dev->internalEndBlock - dev->internalStartBlock + 1; -+ iterations = iterations / 16; -+ if (iterations > 200) { -+ iterations = 200; -+ } -+ } -+ -+ for (i = 0; i <= iterations && pagesInUse > 0 && !prioritised; i++) { -+ b++; -+ if (b < dev->internalStartBlock || b > dev->internalEndBlock) { -+ b = dev->internalStartBlock; -+ } -+ -+ if (b < dev->internalStartBlock || b > dev->internalEndBlock) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("**>> Block %d is not valid" TENDSTR), b)); -+ YBUG(); -+ } -+ -+ bi = yaffs_GetBlockInfo(dev, b); -+ -+#if 0 -+ if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) { -+ dirtiest = b; -+ pagesInUse = 0; -+ } -+ else -+#endif -+ -+ if (bi->blockState == YAFFS_BLOCK_STATE_FULL && -+ (bi->pagesInUse - bi->softDeletions) < pagesInUse && -+ yaffs_BlockNotDisqualifiedFromGC(dev, bi)) { -+ dirtiest = b; -+ pagesInUse = (bi->pagesInUse - bi->softDeletions); -+ } -+ } -+ -+ dev->currentDirtyChecker = b; -+ -+ if (dirtiest > 0) { -+ T(YAFFS_TRACE_GC, -+ (TSTR("GC Selected block %d with %d free, prioritised:%d" TENDSTR), dirtiest, -+ dev->nChunksPerBlock - pagesInUse,prioritised)); -+ } -+ -+ dev->oldestDirtySequence = 0; -+ -+ if (dirtiest > 0) { -+ nonAggressiveSkip = 4; -+ } -+ -+ return dirtiest; -+} -+ -+static void yaffs_BlockBecameDirty(yaffs_Device * dev, int blockNo) -+{ -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockNo); -+ -+ int erasedOk = 0; -+ -+ /* If the block is still healthy erase it and mark as clean. -+ * If the block has had a data failure, then retire it. -+ */ -+ -+ T(YAFFS_TRACE_GC | YAFFS_TRACE_ERASE, -+ (TSTR("yaffs_BlockBecameDirty block %d state %d %s"TENDSTR), -+ blockNo, bi->blockState, (bi->needsRetiring) ? "needs retiring" : "")); -+ -+ bi->blockState = YAFFS_BLOCK_STATE_DIRTY; -+ -+ if (!bi->needsRetiring) { -+ yaffs_InvalidateCheckpoint(dev); -+ erasedOk = yaffs_EraseBlockInNAND(dev, blockNo); -+ if (!erasedOk) { -+ dev->nErasureFailures++; -+ T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS, -+ (TSTR("**>> Erasure failed %d" TENDSTR), blockNo)); -+ } -+ } -+ -+ if (erasedOk && (yaffs_traceMask & YAFFS_TRACE_ERASE)) { -+ int i; -+ for (i = 0; i < dev->nChunksPerBlock; i++) { -+ if (!yaffs_CheckChunkErased -+ (dev, blockNo * dev->nChunksPerBlock + i)) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ (">>Block %d erasure supposedly OK, but chunk %d not erased" -+ TENDSTR), blockNo, i)); -+ } -+ } -+ } -+ -+ if (erasedOk) { -+ /* Clean it up... */ -+ bi->blockState = YAFFS_BLOCK_STATE_EMPTY; -+ dev->nErasedBlocks++; -+ bi->pagesInUse = 0; -+ bi->softDeletions = 0; -+ bi->hasShrinkHeader = 0; -+ bi->skipErasedCheck = 1; /* This is clean, so no need to check */ -+ bi->gcPrioritise = 0; -+ yaffs_ClearChunkBits(dev, blockNo); -+ -+ T(YAFFS_TRACE_ERASE, -+ (TSTR("Erased block %d" TENDSTR), blockNo)); -+ } else { -+ dev->nFreeChunks -= dev->nChunksPerBlock; /* We lost a block of free space */ -+ -+ yaffs_RetireBlock(dev, blockNo); -+ T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS, -+ (TSTR("**>> Block %d retired" TENDSTR), blockNo)); -+ } -+} -+ -+static int yaffs_FindBlockForAllocation(yaffs_Device * dev) -+{ -+ int i; -+ -+ yaffs_BlockInfo *bi; -+ -+ if (dev->nErasedBlocks < 1) { -+ /* Hoosterman we've got a problem. -+ * Can't get space to gc -+ */ -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("yaffs tragedy: no more eraased blocks" TENDSTR))); -+ -+ return -1; -+ } -+ -+ /* Find an empty block. */ -+ -+ for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) { -+ dev->allocationBlockFinder++; -+ if (dev->allocationBlockFinder < dev->internalStartBlock -+ || dev->allocationBlockFinder > dev->internalEndBlock) { -+ dev->allocationBlockFinder = dev->internalStartBlock; -+ } -+ -+ bi = yaffs_GetBlockInfo(dev, dev->allocationBlockFinder); -+ -+ if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY) { -+ bi->blockState = YAFFS_BLOCK_STATE_ALLOCATING; -+ dev->sequenceNumber++; -+ bi->sequenceNumber = dev->sequenceNumber; -+ dev->nErasedBlocks--; -+ T(YAFFS_TRACE_ALLOCATE, -+ (TSTR("Allocated block %d, seq %d, %d left" TENDSTR), -+ dev->allocationBlockFinder, dev->sequenceNumber, -+ dev->nErasedBlocks)); -+ return dev->allocationBlockFinder; -+ } -+ } -+ -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("yaffs tragedy: no more eraased blocks, but there should have been %d" -+ TENDSTR), dev->nErasedBlocks)); -+ -+ return -1; -+} -+ -+ -+// Check if there's space to allocate... -+// Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()? -+static int yaffs_CheckSpaceForAllocation(yaffs_Device * dev) -+{ -+ int reservedChunks; -+ int reservedBlocks = dev->nReservedBlocks; -+ int checkpointBlocks; -+ -+ checkpointBlocks = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint; -+ if(checkpointBlocks < 0) -+ checkpointBlocks = 0; -+ -+ reservedChunks = ((reservedBlocks + checkpointBlocks) * dev->nChunksPerBlock); -+ -+ return (dev->nFreeChunks > reservedChunks); -+} -+ -+static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr) -+{ -+ int retVal; -+ yaffs_BlockInfo *bi; -+ -+ if (dev->allocationBlock < 0) { -+ /* Get next block to allocate off */ -+ dev->allocationBlock = yaffs_FindBlockForAllocation(dev); -+ dev->allocationPage = 0; -+ } -+ -+ if (!useReserve && !yaffs_CheckSpaceForAllocation(dev)) { -+ /* Not enough space to allocate unless we're allowed to use the reserve. */ -+ return -1; -+ } -+ -+ if (dev->nErasedBlocks < dev->nReservedBlocks -+ && dev->allocationPage == 0) { -+ T(YAFFS_TRACE_ALLOCATE, (TSTR("Allocating reserve" TENDSTR))); -+ } -+ -+ /* Next page please.... */ -+ if (dev->allocationBlock >= 0) { -+ bi = yaffs_GetBlockInfo(dev, dev->allocationBlock); -+ -+ retVal = (dev->allocationBlock * dev->nChunksPerBlock) + -+ dev->allocationPage; -+ bi->pagesInUse++; -+ yaffs_SetChunkBit(dev, dev->allocationBlock, -+ dev->allocationPage); -+ -+ dev->allocationPage++; -+ -+ dev->nFreeChunks--; -+ -+ /* If the block is full set the state to full */ -+ if (dev->allocationPage >= dev->nChunksPerBlock) { -+ bi->blockState = YAFFS_BLOCK_STATE_FULL; -+ dev->allocationBlock = -1; -+ } -+ -+ if(blockUsedPtr) -+ *blockUsedPtr = bi; -+ -+ return retVal; -+ } -+ -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR))); -+ -+ return -1; -+} -+ -+static int yaffs_GetErasedChunks(yaffs_Device * dev) -+{ -+ int n; -+ -+ n = dev->nErasedBlocks * dev->nChunksPerBlock; -+ -+ if (dev->allocationBlock > 0) { -+ n += (dev->nChunksPerBlock - dev->allocationPage); -+ } -+ -+ return n; -+ -+} -+ -+static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block) -+{ -+ int oldChunk; -+ int newChunk; -+ int chunkInBlock; -+ int markNAND; -+ int retVal = YAFFS_OK; -+ int cleanups = 0; -+ int i; -+ int isCheckpointBlock; -+ -+ int chunksBefore = yaffs_GetErasedChunks(dev); -+ int chunksAfter; -+ -+ yaffs_ExtendedTags tags; -+ -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, block); -+ -+ yaffs_Object *object; -+ -+ isCheckpointBlock = (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT); -+ -+ bi->blockState = YAFFS_BLOCK_STATE_COLLECTING; -+ -+ T(YAFFS_TRACE_TRACING, -+ (TSTR("Collecting block %d, in use %d, shrink %d, " TENDSTR), block, -+ bi->pagesInUse, bi->hasShrinkHeader)); -+ -+ /*yaffs_VerifyFreeChunks(dev); */ -+ -+ bi->hasShrinkHeader = 0; /* clear the flag so that the block can erase */ -+ -+ /* Take off the number of soft deleted entries because -+ * they're going to get really deleted during GC. -+ */ -+ dev->nFreeChunks -= bi->softDeletions; -+ -+ dev->isDoingGC = 1; -+ -+ if (isCheckpointBlock || -+ !yaffs_StillSomeChunkBits(dev, block)) { -+ T(YAFFS_TRACE_TRACING, -+ (TSTR -+ ("Collecting block %d that has no chunks in use" TENDSTR), -+ block)); -+ yaffs_BlockBecameDirty(dev, block); -+ } else { -+ -+ __u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__); -+ -+ for (chunkInBlock = 0, oldChunk = block * dev->nChunksPerBlock; -+ chunkInBlock < dev->nChunksPerBlock -+ && yaffs_StillSomeChunkBits(dev, block); -+ chunkInBlock++, oldChunk++) { -+ if (yaffs_CheckChunkBit(dev, block, chunkInBlock)) { -+ -+ /* This page is in use and might need to be copied off */ -+ -+ markNAND = 1; -+ -+ yaffs_InitialiseTags(&tags); -+ -+ yaffs_ReadChunkWithTagsFromNAND(dev, oldChunk, -+ buffer, &tags); -+ -+ object = -+ yaffs_FindObjectByNumber(dev, -+ tags.objectId); -+ -+ T(YAFFS_TRACE_GC_DETAIL, -+ (TSTR -+ ("Collecting page %d, %d %d %d " TENDSTR), -+ chunkInBlock, tags.objectId, tags.chunkId, -+ tags.byteCount)); -+ -+ if (!object) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("page %d in gc has no object " -+ TENDSTR), oldChunk)); -+ } -+ -+ if (object && object->deleted -+ && tags.chunkId != 0) { -+ /* Data chunk in a deleted file, throw it away -+ * It's a soft deleted data chunk, -+ * No need to copy this, just forget about it and -+ * fix up the object. -+ */ -+ -+ object->nDataChunks--; -+ -+ if (object->nDataChunks <= 0) { -+ /* remeber to clean up the object */ -+ dev->gcCleanupList[cleanups] = -+ tags.objectId; -+ cleanups++; -+ } -+ markNAND = 0; -+ } else if (0 -+ /* Todo object && object->deleted && object->nDataChunks == 0 */ -+ ) { -+ /* Deleted object header with no data chunks. -+ * Can be discarded and the file deleted. -+ */ -+ object->chunkId = 0; -+ yaffs_FreeTnode(object->myDev, -+ object->variant. -+ fileVariant.top); -+ object->variant.fileVariant.top = NULL; -+ yaffs_DoGenericObjectDeletion(object); -+ -+ } else if (object) { -+ /* It's either a data chunk in a live file or -+ * an ObjectHeader, so we're interested in it. -+ * NB Need to keep the ObjectHeaders of deleted files -+ * until the whole file has been deleted off -+ */ -+ tags.serialNumber++; -+ -+ dev->nGCCopies++; -+ -+ if (tags.chunkId == 0) { -+ /* It is an object Id, -+ * We need to nuke the shrinkheader flags first -+ * We no longer want the shrinkHeader flag since its work is done -+ * and if it is left in place it will mess up scanning. -+ * Also, clear out any shadowing stuff -+ */ -+ -+ yaffs_ObjectHeader *oh; -+ oh = (yaffs_ObjectHeader *)buffer; -+ oh->isShrink = 0; -+ oh->shadowsObject = -1; -+ tags.extraShadows = 0; -+ tags.extraIsShrinkHeader = 0; -+ } -+ -+ newChunk = -+ yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &tags, 1); -+ -+ if (newChunk < 0) { -+ retVal = YAFFS_FAIL; -+ } else { -+ -+ /* Ok, now fix up the Tnodes etc. */ -+ -+ if (tags.chunkId == 0) { -+ /* It's a header */ -+ object->chunkId = newChunk; -+ object->serial = tags.serialNumber; -+ } else { -+ /* It's a data chunk */ -+ yaffs_PutChunkIntoFile -+ (object, -+ tags.chunkId, -+ newChunk, 0); -+ } -+ } -+ } -+ -+ yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__); -+ -+ } -+ } -+ -+ yaffs_ReleaseTempBuffer(dev, buffer, __LINE__); -+ -+ -+ /* Do any required cleanups */ -+ for (i = 0; i < cleanups; i++) { -+ /* Time to delete the file too */ -+ object = -+ yaffs_FindObjectByNumber(dev, -+ dev->gcCleanupList[i]); -+ if (object) { -+ yaffs_FreeTnode(dev, -+ object->variant.fileVariant. -+ top); -+ object->variant.fileVariant.top = NULL; -+ T(YAFFS_TRACE_GC, -+ (TSTR -+ ("yaffs: About to finally delete object %d" -+ TENDSTR), object->objectId)); -+ yaffs_DoGenericObjectDeletion(object); -+ object->myDev->nDeletedFiles--; -+ } -+ -+ } -+ -+ } -+ -+ if (chunksBefore >= (chunksAfter = yaffs_GetErasedChunks(dev))) { -+ T(YAFFS_TRACE_GC, -+ (TSTR -+ ("gc did not increase free chunks before %d after %d" -+ TENDSTR), chunksBefore, chunksAfter)); -+ } -+ -+ dev->isDoingGC = 0; -+ -+ return YAFFS_OK; -+} -+ -+/* New garbage collector -+ * If we're very low on erased blocks then we do aggressive garbage collection -+ * otherwise we do "leasurely" garbage collection. -+ * Aggressive gc looks further (whole array) and will accept less dirty blocks. -+ * Passive gc only inspects smaller areas and will only accept more dirty blocks. -+ * -+ * The idea is to help clear out space in a more spread-out manner. -+ * Dunno if it really does anything useful. -+ */ -+static int yaffs_CheckGarbageCollection(yaffs_Device * dev) -+{ -+ int block; -+ int aggressive; -+ int gcOk = YAFFS_OK; -+ int maxTries = 0; -+ -+ int checkpointBlockAdjust; -+ -+ if (dev->isDoingGC) { -+ /* Bail out so we don't get recursive gc */ -+ return YAFFS_OK; -+ } -+ -+ /* This loop should pass the first time. -+ * We'll only see looping here if the erase of the collected block fails. -+ */ -+ -+ do { -+ maxTries++; -+ -+ checkpointBlockAdjust = (dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint); -+ if(checkpointBlockAdjust < 0) -+ checkpointBlockAdjust = 0; -+ -+ if (dev->nErasedBlocks < (dev->nReservedBlocks + checkpointBlockAdjust)) { -+ /* We need a block soon...*/ -+ aggressive = 1; -+ } else { -+ /* We're in no hurry */ -+ aggressive = 0; -+ } -+ -+ block = yaffs_FindBlockForGarbageCollection(dev, aggressive); -+ -+ if (block > 0) { -+ dev->garbageCollections++; -+ if (!aggressive) { -+ dev->passiveGarbageCollections++; -+ } -+ -+ T(YAFFS_TRACE_GC, -+ (TSTR -+ ("yaffs: GC erasedBlocks %d aggressive %d" TENDSTR), -+ dev->nErasedBlocks, aggressive)); -+ -+ gcOk = yaffs_GarbageCollectBlock(dev, block); -+ } -+ -+ if (dev->nErasedBlocks < (dev->nReservedBlocks) && block > 0) { -+ T(YAFFS_TRACE_GC, -+ (TSTR -+ ("yaffs: GC !!!no reclaim!!! erasedBlocks %d after try %d block %d" -+ TENDSTR), dev->nErasedBlocks, maxTries, block)); -+ } -+ } while ((dev->nErasedBlocks < dev->nReservedBlocks) && (block > 0) -+ && (maxTries < 2)); -+ -+ return aggressive ? gcOk : YAFFS_OK; -+} -+ -+/*------------------------- TAGS --------------------------------*/ -+ -+static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId, -+ int chunkInObject) -+{ -+ return (tags->chunkId == chunkInObject && -+ tags->objectId == objectId && !tags->chunkDeleted) ? 1 : 0; -+ -+} -+ -+ -+/*-------------------- Data file manipulation -----------------*/ -+ -+static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode, -+ yaffs_ExtendedTags * tags) -+{ -+ /*Get the Tnode, then get the level 0 offset chunk offset */ -+ yaffs_Tnode *tn; -+ int theChunk = -1; -+ yaffs_ExtendedTags localTags; -+ int retVal = -1; -+ -+ yaffs_Device *dev = in->myDev; -+ -+ if (!tags) { -+ /* Passed a NULL, so use our own tags space */ -+ tags = &localTags; -+ } -+ -+ tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode); -+ -+ if (tn) { -+ theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode); -+ -+ retVal = -+ yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId, -+ chunkInInode); -+ } -+ return retVal; -+} -+ -+static int yaffs_FindAndDeleteChunkInFile(yaffs_Object * in, int chunkInInode, -+ yaffs_ExtendedTags * tags) -+{ -+ /* Get the Tnode, then get the level 0 offset chunk offset */ -+ yaffs_Tnode *tn; -+ int theChunk = -1; -+ yaffs_ExtendedTags localTags; -+ -+ yaffs_Device *dev = in->myDev; -+ int retVal = -1; -+ -+ if (!tags) { -+ /* Passed a NULL, so use our own tags space */ -+ tags = &localTags; -+ } -+ -+ tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode); -+ -+ if (tn) { -+ -+ theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode); -+ -+ retVal = -+ yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId, -+ chunkInInode); -+ -+ /* Delete the entry in the filestructure (if found) */ -+ if (retVal != -1) { -+ yaffs_PutLevel0Tnode(dev,tn,chunkInInode,0); -+ } -+ } else { -+ /*T(("No level 0 found for %d\n", chunkInInode)); */ -+ } -+ -+ if (retVal == -1) { -+ /* T(("Could not find %d to delete\n",chunkInInode)); */ -+ } -+ return retVal; -+} -+ -+#ifdef YAFFS_PARANOID -+ -+static int yaffs_CheckFileSanity(yaffs_Object * in) -+{ -+ int chunk; -+ int nChunks; -+ int fSize; -+ int failed = 0; -+ int objId; -+ yaffs_Tnode *tn; -+ yaffs_Tags localTags; -+ yaffs_Tags *tags = &localTags; -+ int theChunk; -+ int chunkDeleted; -+ -+ if (in->variantType != YAFFS_OBJECT_TYPE_FILE) { -+ /* T(("Object not a file\n")); */ -+ return YAFFS_FAIL; -+ } -+ -+ objId = in->objectId; -+ fSize = in->variant.fileVariant.fileSize; -+ nChunks = -+ (fSize + in->myDev->nDataBytesPerChunk - 1) / in->myDev->nDataBytesPerChunk; -+ -+ for (chunk = 1; chunk <= nChunks; chunk++) { -+ tn = yaffs_FindLevel0Tnode(in->myDev, &in->variant.fileVariant, -+ chunk); -+ -+ if (tn) { -+ -+ theChunk = yaffs_GetChunkGroupBase(dev,tn,chunk); -+ -+ if (yaffs_CheckChunkBits -+ (dev, theChunk / dev->nChunksPerBlock, -+ theChunk % dev->nChunksPerBlock)) { -+ -+ yaffs_ReadChunkTagsFromNAND(in->myDev, theChunk, -+ tags, -+ &chunkDeleted); -+ if (yaffs_TagsMatch -+ (tags, in->objectId, chunk, chunkDeleted)) { -+ /* found it; */ -+ -+ } -+ } else { -+ -+ failed = 1; -+ } -+ -+ } else { -+ /* T(("No level 0 found for %d\n", chunk)); */ -+ } -+ } -+ -+ return failed ? YAFFS_FAIL : YAFFS_OK; -+} -+ -+#endif -+ -+static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode, -+ int chunkInNAND, int inScan) -+{ -+ /* NB inScan is zero unless scanning. -+ * For forward scanning, inScan is > 0; -+ * for backward scanning inScan is < 0 -+ */ -+ -+ yaffs_Tnode *tn; -+ yaffs_Device *dev = in->myDev; -+ int existingChunk; -+ yaffs_ExtendedTags existingTags; -+ yaffs_ExtendedTags newTags; -+ unsigned existingSerial, newSerial; -+ -+ if (in->variantType != YAFFS_OBJECT_TYPE_FILE) { -+ /* Just ignore an attempt at putting a chunk into a non-file during scanning -+ * If it is not during Scanning then something went wrong! -+ */ -+ if (!inScan) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("yaffs tragedy:attempt to put data chunk into a non-file" -+ TENDSTR))); -+ YBUG(); -+ } -+ -+ yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__); -+ return YAFFS_OK; -+ } -+ -+ tn = yaffs_AddOrFindLevel0Tnode(dev, -+ &in->variant.fileVariant, -+ chunkInInode, -+ NULL); -+ if (!tn) { -+ return YAFFS_FAIL; -+ } -+ -+ existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode); -+ -+ if (inScan != 0) { -+ /* If we're scanning then we need to test for duplicates -+ * NB This does not need to be efficient since it should only ever -+ * happen when the power fails during a write, then only one -+ * chunk should ever be affected. -+ * -+ * Correction for YAFFS2: This could happen quite a lot and we need to think about efficiency! TODO -+ * Update: For backward scanning we don't need to re-read tags so this is quite cheap. -+ */ -+ -+ if (existingChunk != 0) { -+ /* NB Right now existing chunk will not be real chunkId if the device >= 32MB -+ * thus we have to do a FindChunkInFile to get the real chunk id. -+ * -+ * We have a duplicate now we need to decide which one to use: -+ * -+ * Backwards scanning YAFFS2: The old one is what we use, dump the new one. -+ * Forward scanning YAFFS2: The new one is what we use, dump the old one. -+ * YAFFS1: Get both sets of tags and compare serial numbers. -+ */ -+ -+ if (inScan > 0) { -+ /* Only do this for forward scanning */ -+ yaffs_ReadChunkWithTagsFromNAND(dev, -+ chunkInNAND, -+ NULL, &newTags); -+ -+ /* Do a proper find */ -+ existingChunk = -+ yaffs_FindChunkInFile(in, chunkInInode, -+ &existingTags); -+ } -+ -+ if (existingChunk <= 0) { -+ /*Hoosterman - how did this happen? */ -+ -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("yaffs tragedy: existing chunk < 0 in scan" -+ TENDSTR))); -+ -+ } -+ -+ /* NB The deleted flags should be false, otherwise the chunks will -+ * not be loaded during a scan -+ */ -+ -+ newSerial = newTags.serialNumber; -+ existingSerial = existingTags.serialNumber; -+ -+ if ((inScan > 0) && -+ (in->myDev->isYaffs2 || -+ existingChunk <= 0 || -+ ((existingSerial + 1) & 3) == newSerial)) { -+ /* Forward scanning. -+ * Use new -+ * Delete the old one and drop through to update the tnode -+ */ -+ yaffs_DeleteChunk(dev, existingChunk, 1, -+ __LINE__); -+ } else { -+ /* Backward scanning or we want to use the existing one -+ * Use existing. -+ * Delete the new one and return early so that the tnode isn't changed -+ */ -+ yaffs_DeleteChunk(dev, chunkInNAND, 1, -+ __LINE__); -+ return YAFFS_OK; -+ } -+ } -+ -+ } -+ -+ if (existingChunk == 0) { -+ in->nDataChunks++; -+ } -+ -+ yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND); -+ -+ return YAFFS_OK; -+} -+ -+static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode, -+ __u8 * buffer) -+{ -+ int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL); -+ -+ if (chunkInNAND >= 0) { -+ return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND, -+ buffer,NULL); -+ } else { -+ T(YAFFS_TRACE_NANDACCESS, -+ (TSTR("Chunk %d not found zero instead" TENDSTR), -+ chunkInNAND)); -+ /* get sane (zero) data if you read a hole */ -+ memset(buffer, 0, in->myDev->nDataBytesPerChunk); -+ return 0; -+ } -+ -+} -+ -+void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn) -+{ -+ int block; -+ int page; -+ yaffs_ExtendedTags tags; -+ yaffs_BlockInfo *bi; -+ -+ if (chunkId <= 0) -+ return; -+ -+ dev->nDeletions++; -+ block = chunkId / dev->nChunksPerBlock; -+ page = chunkId % dev->nChunksPerBlock; -+ -+ bi = yaffs_GetBlockInfo(dev, block); -+ -+ T(YAFFS_TRACE_DELETION, -+ (TSTR("line %d delete of chunk %d" TENDSTR), lyn, chunkId)); -+ -+ if (markNAND && -+ bi->blockState != YAFFS_BLOCK_STATE_COLLECTING && !dev->isYaffs2) { -+ -+ yaffs_InitialiseTags(&tags); -+ -+ tags.chunkDeleted = 1; -+ -+ yaffs_WriteChunkWithTagsToNAND(dev, chunkId, NULL, &tags); -+ yaffs_HandleUpdateChunk(dev, chunkId, &tags); -+ } else { -+ dev->nUnmarkedDeletions++; -+ } -+ -+ /* Pull out of the management area. -+ * If the whole block became dirty, this will kick off an erasure. -+ */ -+ if (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING || -+ bi->blockState == YAFFS_BLOCK_STATE_FULL || -+ bi->blockState == YAFFS_BLOCK_STATE_NEEDS_SCANNING || -+ bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) { -+ dev->nFreeChunks++; -+ -+ yaffs_ClearChunkBit(dev, block, page); -+ -+ bi->pagesInUse--; -+ -+ if (bi->pagesInUse == 0 && -+ !bi->hasShrinkHeader && -+ bi->blockState != YAFFS_BLOCK_STATE_ALLOCATING && -+ bi->blockState != YAFFS_BLOCK_STATE_NEEDS_SCANNING) { -+ yaffs_BlockBecameDirty(dev, block); -+ } -+ -+ } else { -+ /* T(("Bad news deleting chunk %d\n",chunkId)); */ -+ } -+ -+} -+ -+static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode, -+ const __u8 * buffer, int nBytes, -+ int useReserve) -+{ -+ /* Find old chunk Need to do this to get serial number -+ * Write new one and patch into tree. -+ * Invalidate old tags. -+ */ -+ -+ int prevChunkId; -+ yaffs_ExtendedTags prevTags; -+ -+ int newChunkId; -+ yaffs_ExtendedTags newTags; -+ -+ yaffs_Device *dev = in->myDev; -+ -+ yaffs_CheckGarbageCollection(dev); -+ -+ /* Get the previous chunk at this location in the file if it exists */ -+ prevChunkId = yaffs_FindChunkInFile(in, chunkInInode, &prevTags); -+ -+ /* Set up new tags */ -+ yaffs_InitialiseTags(&newTags); -+ -+ newTags.chunkId = chunkInInode; -+ newTags.objectId = in->objectId; -+ newTags.serialNumber = -+ (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1; -+ newTags.byteCount = nBytes; -+ -+ newChunkId = -+ yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags, -+ useReserve); -+ -+ if (newChunkId >= 0) { -+ yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0); -+ -+ if (prevChunkId >= 0) { -+ yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__); -+ -+ } -+ -+ yaffs_CheckFileSanity(in); -+ } -+ return newChunkId; -+ -+} -+ -+/* UpdateObjectHeader updates the header on NAND for an object. -+ * If name is not NULL, then that new name is used. -+ */ -+int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force, -+ int isShrink, int shadows) -+{ -+ -+ yaffs_BlockInfo *bi; -+ -+ yaffs_Device *dev = in->myDev; -+ -+ int prevChunkId; -+ int retVal = 0; -+ int result = 0; -+ -+ int newChunkId; -+ yaffs_ExtendedTags newTags; -+ -+ __u8 *buffer = NULL; -+ YCHAR oldName[YAFFS_MAX_NAME_LENGTH + 1]; -+ -+ yaffs_ObjectHeader *oh = NULL; -+ -+ if (!in->fake || force) { -+ -+ yaffs_CheckGarbageCollection(dev); -+ -+ buffer = yaffs_GetTempBuffer(in->myDev, __LINE__); -+ oh = (yaffs_ObjectHeader *) buffer; -+ -+ prevChunkId = in->chunkId; -+ -+ if (prevChunkId >= 0) { -+ result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId, -+ buffer, NULL); -+ memcpy(oldName, oh->name, sizeof(oh->name)); -+ } -+ -+ memset(buffer, 0xFF, dev->nDataBytesPerChunk); -+ -+ oh->type = in->variantType; -+ oh->yst_mode = in->yst_mode; -+ oh->shadowsObject = shadows; -+ -+#ifdef CONFIG_YAFFS_WINCE -+ oh->win_atime[0] = in->win_atime[0]; -+ oh->win_ctime[0] = in->win_ctime[0]; -+ oh->win_mtime[0] = in->win_mtime[0]; -+ oh->win_atime[1] = in->win_atime[1]; -+ oh->win_ctime[1] = in->win_ctime[1]; -+ oh->win_mtime[1] = in->win_mtime[1]; -+#else -+ oh->yst_uid = in->yst_uid; -+ oh->yst_gid = in->yst_gid; -+ oh->yst_atime = in->yst_atime; -+ oh->yst_mtime = in->yst_mtime; -+ oh->yst_ctime = in->yst_ctime; -+ oh->yst_rdev = in->yst_rdev; -+#endif -+ if (in->parent) { -+ oh->parentObjectId = in->parent->objectId; -+ } else { -+ oh->parentObjectId = 0; -+ } -+ -+ if (name && *name) { -+ memset(oh->name, 0, sizeof(oh->name)); -+ yaffs_strncpy(oh->name, name, YAFFS_MAX_NAME_LENGTH); -+ } else if (prevChunkId) { -+ memcpy(oh->name, oldName, sizeof(oh->name)); -+ } else { -+ memset(oh->name, 0, sizeof(oh->name)); -+ } -+ -+ oh->isShrink = isShrink; -+ -+ switch (in->variantType) { -+ case YAFFS_OBJECT_TYPE_UNKNOWN: -+ /* Should not happen */ -+ break; -+ case YAFFS_OBJECT_TYPE_FILE: -+ oh->fileSize = -+ (oh->parentObjectId == YAFFS_OBJECTID_DELETED -+ || oh->parentObjectId == -+ YAFFS_OBJECTID_UNLINKED) ? 0 : in->variant. -+ fileVariant.fileSize; -+ break; -+ case YAFFS_OBJECT_TYPE_HARDLINK: -+ oh->equivalentObjectId = -+ in->variant.hardLinkVariant.equivalentObjectId; -+ break; -+ case YAFFS_OBJECT_TYPE_SPECIAL: -+ /* Do nothing */ -+ break; -+ case YAFFS_OBJECT_TYPE_DIRECTORY: -+ /* Do nothing */ -+ break; -+ case YAFFS_OBJECT_TYPE_SYMLINK: -+ yaffs_strncpy(oh->alias, -+ in->variant.symLinkVariant.alias, -+ YAFFS_MAX_ALIAS_LENGTH); -+ oh->alias[YAFFS_MAX_ALIAS_LENGTH] = 0; -+ break; -+ } -+ -+ /* Tags */ -+ yaffs_InitialiseTags(&newTags); -+ in->serial++; -+ newTags.chunkId = 0; -+ newTags.objectId = in->objectId; -+ newTags.serialNumber = in->serial; -+ -+ /* Add extra info for file header */ -+ -+ newTags.extraHeaderInfoAvailable = 1; -+ newTags.extraParentObjectId = oh->parentObjectId; -+ newTags.extraFileLength = oh->fileSize; -+ newTags.extraIsShrinkHeader = oh->isShrink; -+ newTags.extraEquivalentObjectId = oh->equivalentObjectId; -+ newTags.extraShadows = (oh->shadowsObject > 0) ? 1 : 0; -+ newTags.extraObjectType = in->variantType; -+ -+ /* Create new chunk in NAND */ -+ newChunkId = -+ yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags, -+ (prevChunkId >= 0) ? 1 : 0); -+ -+ if (newChunkId >= 0) { -+ -+ in->chunkId = newChunkId; -+ -+ if (prevChunkId >= 0) { -+ yaffs_DeleteChunk(dev, prevChunkId, 1, -+ __LINE__); -+ } -+ -+ if(!yaffs_ObjectHasCachedWriteData(in)) -+ in->dirty = 0; -+ -+ /* If this was a shrink, then mark the block that the chunk lives on */ -+ if (isShrink) { -+ bi = yaffs_GetBlockInfo(in->myDev, -+ newChunkId /in->myDev-> nChunksPerBlock); -+ bi->hasShrinkHeader = 1; -+ } -+ -+ } -+ -+ retVal = newChunkId; -+ -+ } -+ -+ if (buffer) -+ yaffs_ReleaseTempBuffer(dev, buffer, __LINE__); -+ -+ return retVal; -+} -+ -+/*------------------------ Short Operations Cache ---------------------------------------- -+ * In many situations where there is no high level buffering (eg WinCE) a lot of -+ * reads might be short sequential reads, and a lot of writes may be short -+ * sequential writes. eg. scanning/writing a jpeg file. -+ * In these cases, a short read/write cache can provide a huge perfomance benefit -+ * with dumb-as-a-rock code. -+ * In Linux, the page cache provides read buffering aand the short op cache provides write -+ * buffering. -+ * -+ * There are a limited number (~10) of cache chunks per device so that we don't -+ * need a very intelligent search. -+ */ -+ -+static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj) -+{ -+ yaffs_Device *dev = obj->myDev; -+ int i; -+ yaffs_ChunkCache *cache; -+ int nCaches = obj->myDev->nShortOpCaches; -+ -+ for(i = 0; i < nCaches; i++){ -+ cache = &dev->srCache[i]; -+ if (cache->object == obj && -+ cache->dirty) -+ return 1; -+ } -+ -+ return 0; -+} -+ -+ -+static void yaffs_FlushFilesChunkCache(yaffs_Object * obj) -+{ -+ yaffs_Device *dev = obj->myDev; -+ int lowest = -99; /* Stop compiler whining. */ -+ int i; -+ yaffs_ChunkCache *cache; -+ int chunkWritten = 0; -+ int nCaches = obj->myDev->nShortOpCaches; -+ -+ if (nCaches > 0) { -+ do { -+ cache = NULL; -+ -+ /* Find the dirty cache for this object with the lowest chunk id. */ -+ for (i = 0; i < nCaches; i++) { -+ if (dev->srCache[i].object == obj && -+ dev->srCache[i].dirty) { -+ if (!cache -+ || dev->srCache[i].chunkId < -+ lowest) { -+ cache = &dev->srCache[i]; -+ lowest = cache->chunkId; -+ } -+ } -+ } -+ -+ if (cache && !cache->locked) { -+ /* Write it out and free it up */ -+ -+ chunkWritten = -+ yaffs_WriteChunkDataToObject(cache->object, -+ cache->chunkId, -+ cache->data, -+ cache->nBytes, -+ 1); -+ cache->dirty = 0; -+ cache->object = NULL; -+ } -+ -+ } while (cache && chunkWritten > 0); -+ -+ if (cache) { -+ /* Hoosterman, disk full while writing cache out. */ -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("yaffs tragedy: no space during cache write" TENDSTR))); -+ -+ } -+ } -+ -+} -+ -+/*yaffs_FlushEntireDeviceCache(dev) -+ * -+ * -+ */ -+ -+void yaffs_FlushEntireDeviceCache(yaffs_Device *dev) -+{ -+ yaffs_Object *obj; -+ int nCaches = dev->nShortOpCaches; -+ int i; -+ -+ /* Find a dirty object in the cache and flush it... -+ * until there are no further dirty objects. -+ */ -+ do { -+ obj = NULL; -+ for( i = 0; i < nCaches && !obj; i++) { -+ if (dev->srCache[i].object && -+ dev->srCache[i].dirty) -+ obj = dev->srCache[i].object; -+ -+ } -+ if(obj) -+ yaffs_FlushFilesChunkCache(obj); -+ -+ } while(obj); -+ -+} -+ -+ -+/* Grab us a cache chunk for use. -+ * First look for an empty one. -+ * Then look for the least recently used non-dirty one. -+ * Then look for the least recently used dirty one...., flush and look again. -+ */ -+static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device * dev) -+{ -+ int i; -+ int usage; -+ int theOne; -+ -+ if (dev->nShortOpCaches > 0) { -+ for (i = 0; i < dev->nShortOpCaches; i++) { -+ if (!dev->srCache[i].object) -+ return &dev->srCache[i]; -+ } -+ -+ return NULL; -+ -+ theOne = -1; -+ usage = 0; /* just to stop the compiler grizzling */ -+ -+ for (i = 0; i < dev->nShortOpCaches; i++) { -+ if (!dev->srCache[i].dirty && -+ ((dev->srCache[i].lastUse < usage && theOne >= 0) || -+ theOne < 0)) { -+ usage = dev->srCache[i].lastUse; -+ theOne = i; -+ } -+ } -+ -+ -+ return theOne >= 0 ? &dev->srCache[theOne] : NULL; -+ } else { -+ return NULL; -+ } -+ -+} -+ -+static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device * dev) -+{ -+ yaffs_ChunkCache *cache; -+ yaffs_Object *theObj; -+ int usage; -+ int i; -+ int pushout; -+ -+ if (dev->nShortOpCaches > 0) { -+ /* Try find a non-dirty one... */ -+ -+ cache = yaffs_GrabChunkCacheWorker(dev); -+ -+ if (!cache) { -+ /* They were all dirty, find the last recently used object and flush -+ * its cache, then find again. -+ * NB what's here is not very accurate, we actually flush the object -+ * the last recently used page. -+ */ -+ -+ /* With locking we can't assume we can use entry zero */ -+ -+ theObj = NULL; -+ usage = -1; -+ cache = NULL; -+ pushout = -1; -+ -+ for (i = 0; i < dev->nShortOpCaches; i++) { -+ if (dev->srCache[i].object && -+ !dev->srCache[i].locked && -+ (dev->srCache[i].lastUse < usage || !cache)) -+ { -+ usage = dev->srCache[i].lastUse; -+ theObj = dev->srCache[i].object; -+ cache = &dev->srCache[i]; -+ pushout = i; -+ } -+ } -+ -+ if (!cache || cache->dirty) { -+ /* Flush and try again */ -+ yaffs_FlushFilesChunkCache(theObj); -+ cache = yaffs_GrabChunkCacheWorker(dev); -+ } -+ -+ } -+ return cache; -+ } else -+ return NULL; -+ -+} -+ -+/* Find a cached chunk */ -+static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object * obj, -+ int chunkId) -+{ -+ yaffs_Device *dev = obj->myDev; -+ int i; -+ if (dev->nShortOpCaches > 0) { -+ for (i = 0; i < dev->nShortOpCaches; i++) { -+ if (dev->srCache[i].object == obj && -+ dev->srCache[i].chunkId == chunkId) { -+ dev->cacheHits++; -+ -+ return &dev->srCache[i]; -+ } -+ } -+ } -+ return NULL; -+} -+ -+/* Mark the chunk for the least recently used algorithym */ -+static void yaffs_UseChunkCache(yaffs_Device * dev, yaffs_ChunkCache * cache, -+ int isAWrite) -+{ -+ -+ if (dev->nShortOpCaches > 0) { -+ if (dev->srLastUse < 0 || dev->srLastUse > 100000000) { -+ /* Reset the cache usages */ -+ int i; -+ for (i = 1; i < dev->nShortOpCaches; i++) { -+ dev->srCache[i].lastUse = 0; -+ } -+ dev->srLastUse = 0; -+ } -+ -+ dev->srLastUse++; -+ -+ cache->lastUse = dev->srLastUse; -+ -+ if (isAWrite) { -+ cache->dirty = 1; -+ } -+ } -+} -+ -+/* Invalidate a single cache page. -+ * Do this when a whole page gets written, -+ * ie the short cache for this page is no longer valid. -+ */ -+static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId) -+{ -+ if (object->myDev->nShortOpCaches > 0) { -+ yaffs_ChunkCache *cache = yaffs_FindChunkCache(object, chunkId); -+ -+ if (cache) { -+ cache->object = NULL; -+ } -+ } -+} -+ -+/* Invalidate all the cache pages associated with this object -+ * Do this whenever ther file is deleted or resized. -+ */ -+static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in) -+{ -+ int i; -+ yaffs_Device *dev = in->myDev; -+ -+ if (dev->nShortOpCaches > 0) { -+ /* Invalidate it. */ -+ for (i = 0; i < dev->nShortOpCaches; i++) { -+ if (dev->srCache[i].object == in) { -+ dev->srCache[i].object = NULL; -+ } -+ } -+ } -+} -+ -+/*--------------------- Checkpointing --------------------*/ -+ -+ -+static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev,int head) -+{ -+ yaffs_CheckpointValidity cp; -+ cp.structType = sizeof(cp); -+ cp.magic = YAFFS_MAGIC; -+ cp.version = YAFFS_CHECKPOINT_VERSION; -+ cp.head = (head) ? 1 : 0; -+ -+ return (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp))? -+ 1 : 0; -+} -+ -+static int yaffs_ReadCheckpointValidityMarker(yaffs_Device *dev, int head) -+{ -+ yaffs_CheckpointValidity cp; -+ int ok; -+ -+ ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp)); -+ -+ if(ok) -+ ok = (cp.structType == sizeof(cp)) && -+ (cp.magic == YAFFS_MAGIC) && -+ (cp.version == YAFFS_CHECKPOINT_VERSION) && -+ (cp.head == ((head) ? 1 : 0)); -+ return ok ? 1 : 0; -+} -+ -+static void yaffs_DeviceToCheckpointDevice(yaffs_CheckpointDevice *cp, -+ yaffs_Device *dev) -+{ -+ cp->nErasedBlocks = dev->nErasedBlocks; -+ cp->allocationBlock = dev->allocationBlock; -+ cp->allocationPage = dev->allocationPage; -+ cp->nFreeChunks = dev->nFreeChunks; -+ -+ cp->nDeletedFiles = dev->nDeletedFiles; -+ cp->nUnlinkedFiles = dev->nUnlinkedFiles; -+ cp->nBackgroundDeletions = dev->nBackgroundDeletions; -+ cp->sequenceNumber = dev->sequenceNumber; -+ cp->oldestDirtySequence = dev->oldestDirtySequence; -+ -+} -+ -+static void yaffs_CheckpointDeviceToDevice(yaffs_Device *dev, -+ yaffs_CheckpointDevice *cp) -+{ -+ dev->nErasedBlocks = cp->nErasedBlocks; -+ dev->allocationBlock = cp->allocationBlock; -+ dev->allocationPage = cp->allocationPage; -+ dev->nFreeChunks = cp->nFreeChunks; -+ -+ dev->nDeletedFiles = cp->nDeletedFiles; -+ dev->nUnlinkedFiles = cp->nUnlinkedFiles; -+ dev->nBackgroundDeletions = cp->nBackgroundDeletions; -+ dev->sequenceNumber = cp->sequenceNumber; -+ dev->oldestDirtySequence = cp->oldestDirtySequence; -+} -+ -+ -+static int yaffs_WriteCheckpointDevice(yaffs_Device *dev) -+{ -+ yaffs_CheckpointDevice cp; -+ __u32 nBytes; -+ __u32 nBlocks = (dev->internalEndBlock - dev->internalStartBlock + 1); -+ -+ int ok; -+ -+ /* Write device runtime values*/ -+ yaffs_DeviceToCheckpointDevice(&cp,dev); -+ cp.structType = sizeof(cp); -+ -+ ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp)); -+ -+ /* Write block info */ -+ if(ok) { -+ nBytes = nBlocks * sizeof(yaffs_BlockInfo); -+ ok = (yaffs_CheckpointWrite(dev,dev->blockInfo,nBytes) == nBytes); -+ } -+ -+ /* Write chunk bits */ -+ if(ok) { -+ nBytes = nBlocks * dev->chunkBitmapStride; -+ ok = (yaffs_CheckpointWrite(dev,dev->chunkBits,nBytes) == nBytes); -+ } -+ return ok ? 1 : 0; -+ -+} -+ -+static int yaffs_ReadCheckpointDevice(yaffs_Device *dev) -+{ -+ yaffs_CheckpointDevice cp; -+ __u32 nBytes; -+ __u32 nBlocks = (dev->internalEndBlock - dev->internalStartBlock + 1); -+ -+ int ok; -+ -+ ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp)); -+ if(!ok) -+ return 0; -+ -+ if(cp.structType != sizeof(cp)) -+ return 0; -+ -+ -+ yaffs_CheckpointDeviceToDevice(dev,&cp); -+ -+ nBytes = nBlocks * sizeof(yaffs_BlockInfo); -+ -+ ok = (yaffs_CheckpointRead(dev,dev->blockInfo,nBytes) == nBytes); -+ -+ if(!ok) -+ return 0; -+ nBytes = nBlocks * dev->chunkBitmapStride; -+ -+ ok = (yaffs_CheckpointRead(dev,dev->chunkBits,nBytes) == nBytes); -+ -+ return ok ? 1 : 0; -+} -+ -+static void yaffs_ObjectToCheckpointObject(yaffs_CheckpointObject *cp, -+ yaffs_Object *obj) -+{ -+ -+ cp->objectId = obj->objectId; -+ cp->parentId = (obj->parent) ? obj->parent->objectId : 0; -+ cp->chunkId = obj->chunkId; -+ cp->variantType = obj->variantType; -+ cp->deleted = obj->deleted; -+ cp->softDeleted = obj->softDeleted; -+ cp->unlinked = obj->unlinked; -+ cp->fake = obj->fake; -+ cp->renameAllowed = obj->renameAllowed; -+ cp->unlinkAllowed = obj->unlinkAllowed; -+ cp->serial = obj->serial; -+ cp->nDataChunks = obj->nDataChunks; -+ -+ if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) -+ cp->fileSizeOrEquivalentObjectId = obj->variant.fileVariant.fileSize; -+ else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) -+ cp->fileSizeOrEquivalentObjectId = obj->variant.hardLinkVariant.equivalentObjectId; -+} -+ -+static void yaffs_CheckpointObjectToObject( yaffs_Object *obj,yaffs_CheckpointObject *cp) -+{ -+ -+ yaffs_Object *parent; -+ -+ obj->objectId = cp->objectId; -+ -+ if(cp->parentId) -+ parent = yaffs_FindOrCreateObjectByNumber( -+ obj->myDev, -+ cp->parentId, -+ YAFFS_OBJECT_TYPE_DIRECTORY); -+ else -+ parent = NULL; -+ -+ if(parent) -+ yaffs_AddObjectToDirectory(parent, obj); -+ -+ obj->chunkId = cp->chunkId; -+ obj->variantType = cp->variantType; -+ obj->deleted = cp->deleted; -+ obj->softDeleted = cp->softDeleted; -+ obj->unlinked = cp->unlinked; -+ obj->fake = cp->fake; -+ obj->renameAllowed = cp->renameAllowed; -+ obj->unlinkAllowed = cp->unlinkAllowed; -+ obj->serial = cp->serial; -+ obj->nDataChunks = cp->nDataChunks; -+ -+ if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) -+ obj->variant.fileVariant.fileSize = cp->fileSizeOrEquivalentObjectId; -+ else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) -+ obj->variant.hardLinkVariant.equivalentObjectId = cp->fileSizeOrEquivalentObjectId; -+ -+ if(obj->objectId >= YAFFS_NOBJECT_BUCKETS) -+ obj->lazyLoaded = 1; -+} -+ -+ -+ -+static int yaffs_CheckpointTnodeWorker(yaffs_Object * in, yaffs_Tnode * tn, -+ __u32 level, int chunkOffset) -+{ -+ int i; -+ yaffs_Device *dev = in->myDev; -+ int ok = 1; -+ int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8; -+ -+ if (tn) { -+ if (level > 0) { -+ -+ for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){ -+ if (tn->internal[i]) { -+ ok = yaffs_CheckpointTnodeWorker(in, -+ tn->internal[i], -+ level - 1, -+ (chunkOffset<variantType == YAFFS_OBJECT_TYPE_FILE){ -+ ok = yaffs_CheckpointTnodeWorker(obj, -+ obj->variant.fileVariant.top, -+ obj->variant.fileVariant.topLevel, -+ 0); -+ if(ok) -+ ok = (yaffs_CheckpointWrite(obj->myDev,&endMarker,sizeof(endMarker)) == -+ sizeof(endMarker)); -+ } -+ -+ return ok ? 1 : 0; -+} -+ -+static int yaffs_ReadCheckpointTnodes(yaffs_Object *obj) -+{ -+ __u32 baseChunk; -+ int ok = 1; -+ yaffs_Device *dev = obj->myDev; -+ yaffs_FileStructure *fileStructPtr = &obj->variant.fileVariant; -+ yaffs_Tnode *tn; -+ -+ ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk)); -+ -+ while(ok && (~baseChunk)){ -+ /* Read level 0 tnode */ -+ -+ /* printf("read tnode at %d\n",baseChunk); */ -+ tn = yaffs_GetTnodeRaw(dev); -+ if(tn) -+ ok = (yaffs_CheckpointRead(dev,tn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8) == -+ (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8); -+ else -+ ok = 0; -+ -+ if(tn && ok){ -+ ok = yaffs_AddOrFindLevel0Tnode(dev, -+ fileStructPtr, -+ baseChunk, -+ tn) ? 1 : 0; -+ } -+ -+ if(ok) -+ ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk)); -+ -+ } -+ -+ return ok ? 1 : 0; -+} -+ -+ -+static int yaffs_WriteCheckpointObjects(yaffs_Device *dev) -+{ -+ yaffs_Object *obj; -+ yaffs_CheckpointObject cp; -+ int i; -+ int ok = 1; -+ struct list_head *lh; -+ -+ -+ /* Iterate through the objects in each hash entry, -+ * dumping them to the checkpointing stream. -+ */ -+ -+ for(i = 0; ok && i < YAFFS_NOBJECT_BUCKETS; i++){ -+ list_for_each(lh, &dev->objectBucket[i].list) { -+ if (lh) { -+ obj = list_entry(lh, yaffs_Object, hashLink); -+ if (!obj->deferedFree) { -+ yaffs_ObjectToCheckpointObject(&cp,obj); -+ cp.structType = sizeof(cp); -+ -+ T(YAFFS_TRACE_CHECKPOINT,( -+ TSTR("Checkpoint write object %d parent %d type %d chunk %d obj addr %x" TENDSTR), -+ cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj)); -+ -+ ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp)); -+ -+ if(ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE){ -+ ok = yaffs_WriteCheckpointTnodes(obj); -+ } -+ } -+ } -+ } -+ } -+ -+ /* Dump end of list */ -+ memset(&cp,0xFF,sizeof(yaffs_CheckpointObject)); -+ cp.structType = sizeof(cp); -+ -+ if(ok) -+ ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp)); -+ -+ return ok ? 1 : 0; -+} -+ -+static int yaffs_ReadCheckpointObjects(yaffs_Device *dev) -+{ -+ yaffs_Object *obj; -+ yaffs_CheckpointObject cp; -+ int ok = 1; -+ int done = 0; -+ yaffs_Object *hardList = NULL; -+ -+ while(ok && !done) { -+ ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp)); -+ if(cp.structType != sizeof(cp)) { -+ /* printf("structure parsing failed\n"); */ -+ ok = 0; -+ } -+ -+ if(ok && cp.objectId == ~0) -+ done = 1; -+ else if(ok){ -+ obj = yaffs_FindOrCreateObjectByNumber(dev,cp.objectId, cp.variantType); -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("Checkpoint read object %d parent %d type %d chunk %d obj addr %x" TENDSTR), -+ cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj)); -+ if(obj) { -+ yaffs_CheckpointObjectToObject(obj,&cp); -+ if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) { -+ ok = yaffs_ReadCheckpointTnodes(obj); -+ } else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) { -+ obj->hardLinks.next = -+ (struct list_head *) -+ hardList; -+ hardList = obj; -+ } -+ -+ } -+ } -+ } -+ -+ if(ok) -+ yaffs_HardlinkFixup(dev,hardList); -+ -+ return ok ? 1 : 0; -+} -+ -+static int yaffs_WriteCheckpointData(yaffs_Device *dev) -+{ -+ -+ int ok; -+ -+ ok = yaffs_CheckpointOpen(dev,1); -+ -+ if(ok) -+ ok = yaffs_WriteCheckpointValidityMarker(dev,1); -+ if(ok) -+ ok = yaffs_WriteCheckpointDevice(dev); -+ if(ok) -+ ok = yaffs_WriteCheckpointObjects(dev); -+ if(ok) -+ ok = yaffs_WriteCheckpointValidityMarker(dev,0); -+ -+ if(!yaffs_CheckpointClose(dev)) -+ ok = 0; -+ -+ if(ok) -+ dev->isCheckpointed = 1; -+ else -+ dev->isCheckpointed = 0; -+ -+ return dev->isCheckpointed; -+} -+ -+static int yaffs_ReadCheckpointData(yaffs_Device *dev) -+{ -+ int ok; -+ -+ ok = yaffs_CheckpointOpen(dev,0); /* open for read */ -+ -+ if(ok) -+ ok = yaffs_ReadCheckpointValidityMarker(dev,1); -+ if(ok) -+ ok = yaffs_ReadCheckpointDevice(dev); -+ if(ok) -+ ok = yaffs_ReadCheckpointObjects(dev); -+ if(ok) -+ ok = yaffs_ReadCheckpointValidityMarker(dev,0); -+ -+ -+ -+ if(!yaffs_CheckpointClose(dev)) -+ ok = 0; -+ -+ if(ok) -+ dev->isCheckpointed = 1; -+ else -+ dev->isCheckpointed = 0; -+ -+ return ok ? 1 : 0; -+ -+} -+ -+static void yaffs_InvalidateCheckpoint(yaffs_Device *dev) -+{ -+ if(dev->isCheckpointed || -+ dev->blocksInCheckpoint > 0){ -+ dev->isCheckpointed = 0; -+ yaffs_CheckpointInvalidateStream(dev); -+ if(dev->superBlock && dev->markSuperBlockDirty) -+ dev->markSuperBlockDirty(dev->superBlock); -+ } -+} -+ -+ -+int yaffs_CheckpointSave(yaffs_Device *dev) -+{ -+ yaffs_ReportOddballBlocks(dev); -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("save entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed)); -+ -+ if(!dev->isCheckpointed) -+ yaffs_WriteCheckpointData(dev); -+ -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("save exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed)); -+ -+ return dev->isCheckpointed; -+} -+ -+int yaffs_CheckpointRestore(yaffs_Device *dev) -+{ -+ int retval; -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed)); -+ -+ retval = yaffs_ReadCheckpointData(dev); -+ -+ T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed)); -+ -+ yaffs_ReportOddballBlocks(dev); -+ -+ return retval; -+} -+ -+/*--------------------- File read/write ------------------------ -+ * Read and write have very similar structures. -+ * In general the read/write has three parts to it -+ * An incomplete chunk to start with (if the read/write is not chunk-aligned) -+ * Some complete chunks -+ * An incomplete chunk to end off with -+ * -+ * Curve-balls: the first chunk might also be the last chunk. -+ */ -+ -+int yaffs_ReadDataFromFile(yaffs_Object * in, __u8 * buffer, loff_t offset, -+ int nBytes) -+{ -+ -+ int chunk; -+ int start; -+ int nToCopy; -+ int n = nBytes; -+ int nDone = 0; -+ yaffs_ChunkCache *cache; -+ -+ yaffs_Device *dev; -+ -+ dev = in->myDev; -+ -+ while (n > 0) { -+ //chunk = offset / dev->nDataBytesPerChunk + 1; -+ //start = offset % dev->nDataBytesPerChunk; -+ yaffs_AddrToChunk(dev,offset,&chunk,&start); -+ chunk++; -+ -+ /* OK now check for the curveball where the start and end are in -+ * the same chunk. -+ */ -+ if ((start + n) < dev->nDataBytesPerChunk) { -+ nToCopy = n; -+ } else { -+ nToCopy = dev->nDataBytesPerChunk - start; -+ } -+ -+ cache = yaffs_FindChunkCache(in, chunk); -+ -+ /* If the chunk is already in the cache or it is less than a whole chunk -+ * then use the cache (if there is caching) -+ * else bypass the cache. -+ */ -+ if (cache || nToCopy != dev->nDataBytesPerChunk) { -+ if (dev->nShortOpCaches > 0) { -+ -+ /* If we can't find the data in the cache, then load it up. */ -+ -+ if (!cache) { -+ cache = yaffs_GrabChunkCache(in->myDev); -+ cache->object = in; -+ cache->chunkId = chunk; -+ cache->dirty = 0; -+ cache->locked = 0; -+ yaffs_ReadChunkDataFromObject(in, chunk, -+ cache-> -+ data); -+ cache->nBytes = 0; -+ } -+ -+ yaffs_UseChunkCache(dev, cache, 0); -+ -+ cache->locked = 1; -+ -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_UnlockYAFFS(TRUE); -+#endif -+ memcpy(buffer, &cache->data[start], nToCopy); -+ -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_LockYAFFS(TRUE); -+#endif -+ cache->locked = 0; -+ } else { -+ /* Read into the local buffer then copy..*/ -+ -+ __u8 *localBuffer = -+ yaffs_GetTempBuffer(dev, __LINE__); -+ yaffs_ReadChunkDataFromObject(in, chunk, -+ localBuffer); -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_UnlockYAFFS(TRUE); -+#endif -+ memcpy(buffer, &localBuffer[start], nToCopy); -+ -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_LockYAFFS(TRUE); -+#endif -+ yaffs_ReleaseTempBuffer(dev, localBuffer, -+ __LINE__); -+ } -+ -+ } else { -+#ifdef CONFIG_YAFFS_WINCE -+ __u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__); -+ -+ /* Under WinCE can't do direct transfer. Need to use a local buffer. -+ * This is because we otherwise screw up WinCE's memory mapper -+ */ -+ yaffs_ReadChunkDataFromObject(in, chunk, localBuffer); -+ -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_UnlockYAFFS(TRUE); -+#endif -+ memcpy(buffer, localBuffer, dev->nDataBytesPerChunk); -+ -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_LockYAFFS(TRUE); -+ yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__); -+#endif -+ -+#else -+ /* A full chunk. Read directly into the supplied buffer. */ -+ yaffs_ReadChunkDataFromObject(in, chunk, buffer); -+#endif -+ } -+ -+ n -= nToCopy; -+ offset += nToCopy; -+ buffer += nToCopy; -+ nDone += nToCopy; -+ -+ } -+ -+ return nDone; -+} -+ -+int yaffs_WriteDataToFile(yaffs_Object * in, const __u8 * buffer, loff_t offset, -+ int nBytes, int writeThrough) -+{ -+ -+ int chunk; -+ int start; -+ int nToCopy; -+ int n = nBytes; -+ int nDone = 0; -+ int nToWriteBack; -+ int startOfWrite = offset; -+ int chunkWritten = 0; -+ int nBytesRead; -+ -+ yaffs_Device *dev; -+ -+ dev = in->myDev; -+ -+ while (n > 0 && chunkWritten >= 0) { -+ //chunk = offset / dev->nDataBytesPerChunk + 1; -+ //start = offset % dev->nDataBytesPerChunk; -+ yaffs_AddrToChunk(dev,offset,&chunk,&start); -+ chunk++; -+ -+ /* OK now check for the curveball where the start and end are in -+ * the same chunk. -+ */ -+ -+ if ((start + n) < dev->nDataBytesPerChunk) { -+ nToCopy = n; -+ -+ /* Now folks, to calculate how many bytes to write back.... -+ * If we're overwriting and not writing to then end of file then -+ * we need to write back as much as was there before. -+ */ -+ -+ nBytesRead = -+ in->variant.fileVariant.fileSize - -+ ((chunk - 1) * dev->nDataBytesPerChunk); -+ -+ if (nBytesRead > dev->nDataBytesPerChunk) { -+ nBytesRead = dev->nDataBytesPerChunk; -+ } -+ -+ nToWriteBack = -+ (nBytesRead > -+ (start + n)) ? nBytesRead : (start + n); -+ -+ } else { -+ nToCopy = dev->nDataBytesPerChunk - start; -+ nToWriteBack = dev->nDataBytesPerChunk; -+ } -+ -+ if (nToCopy != dev->nDataBytesPerChunk) { -+ /* An incomplete start or end chunk (or maybe both start and end chunk) */ -+ if (dev->nShortOpCaches > 0) { -+ yaffs_ChunkCache *cache; -+ /* If we can't find the data in the cache, then load the cache */ -+ cache = yaffs_FindChunkCache(in, chunk); -+ -+ if (!cache -+ && yaffs_CheckSpaceForAllocation(in-> -+ myDev)) { -+ cache = yaffs_GrabChunkCache(in->myDev); -+ cache->object = in; -+ cache->chunkId = chunk; -+ cache->dirty = 0; -+ cache->locked = 0; -+ yaffs_ReadChunkDataFromObject(in, chunk, -+ cache-> -+ data); -+ } -+ else if(cache && -+ !cache->dirty && -+ !yaffs_CheckSpaceForAllocation(in->myDev)){ -+ /* Drop the cache if it was a read cache item and -+ * no space check has been made for it. -+ */ -+ cache = NULL; -+ } -+ -+ if (cache) { -+ yaffs_UseChunkCache(dev, cache, 1); -+ cache->locked = 1; -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_UnlockYAFFS(TRUE); -+#endif -+ -+ memcpy(&cache->data[start], buffer, -+ nToCopy); -+ -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_LockYAFFS(TRUE); -+#endif -+ cache->locked = 0; -+ cache->nBytes = nToWriteBack; -+ -+ if (writeThrough) { -+ chunkWritten = -+ yaffs_WriteChunkDataToObject -+ (cache->object, -+ cache->chunkId, -+ cache->data, cache->nBytes, -+ 1); -+ cache->dirty = 0; -+ } -+ -+ } else { -+ chunkWritten = -1; /* fail the write */ -+ } -+ } else { -+ /* An incomplete start or end chunk (or maybe both start and end chunk) -+ * Read into the local buffer then copy, then copy over and write back. -+ */ -+ -+ __u8 *localBuffer = -+ yaffs_GetTempBuffer(dev, __LINE__); -+ -+ yaffs_ReadChunkDataFromObject(in, chunk, -+ localBuffer); -+ -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_UnlockYAFFS(TRUE); -+#endif -+ -+ memcpy(&localBuffer[start], buffer, nToCopy); -+ -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_LockYAFFS(TRUE); -+#endif -+ chunkWritten = -+ yaffs_WriteChunkDataToObject(in, chunk, -+ localBuffer, -+ nToWriteBack, -+ 0); -+ -+ yaffs_ReleaseTempBuffer(dev, localBuffer, -+ __LINE__); -+ -+ } -+ -+ } else { -+ -+#ifdef CONFIG_YAFFS_WINCE -+ /* Under WinCE can't do direct transfer. Need to use a local buffer. -+ * This is because we otherwise screw up WinCE's memory mapper -+ */ -+ __u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__); -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_UnlockYAFFS(TRUE); -+#endif -+ memcpy(localBuffer, buffer, dev->nDataBytesPerChunk); -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_LockYAFFS(TRUE); -+#endif -+ chunkWritten = -+ yaffs_WriteChunkDataToObject(in, chunk, localBuffer, -+ dev->nDataBytesPerChunk, -+ 0); -+ yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__); -+#else -+ /* A full chunk. Write directly from the supplied buffer. */ -+ chunkWritten = -+ yaffs_WriteChunkDataToObject(in, chunk, buffer, -+ dev->nDataBytesPerChunk, -+ 0); -+#endif -+ /* Since we've overwritten the cached data, we better invalidate it. */ -+ yaffs_InvalidateChunkCache(in, chunk); -+ } -+ -+ if (chunkWritten >= 0) { -+ n -= nToCopy; -+ offset += nToCopy; -+ buffer += nToCopy; -+ nDone += nToCopy; -+ } -+ -+ } -+ -+ /* Update file object */ -+ -+ if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize) { -+ in->variant.fileVariant.fileSize = (startOfWrite + nDone); -+ } -+ -+ in->dirty = 1; -+ -+ return nDone; -+} -+ -+ -+/* ---------------------- File resizing stuff ------------------ */ -+ -+static void yaffs_PruneResizedChunks(yaffs_Object * in, int newSize) -+{ -+ -+ yaffs_Device *dev = in->myDev; -+ int oldFileSize = in->variant.fileVariant.fileSize; -+ -+ int lastDel = 1 + (oldFileSize - 1) / dev->nDataBytesPerChunk; -+ -+ int startDel = 1 + (newSize + dev->nDataBytesPerChunk - 1) / -+ dev->nDataBytesPerChunk; -+ int i; -+ int chunkId; -+ -+ /* Delete backwards so that we don't end up with holes if -+ * power is lost part-way through the operation. -+ */ -+ for (i = lastDel; i >= startDel; i--) { -+ /* NB this could be optimised somewhat, -+ * eg. could retrieve the tags and write them without -+ * using yaffs_DeleteChunk -+ */ -+ -+ chunkId = yaffs_FindAndDeleteChunkInFile(in, i, NULL); -+ if (chunkId > 0) { -+ if (chunkId < -+ (dev->internalStartBlock * dev->nChunksPerBlock) -+ || chunkId >= -+ ((dev->internalEndBlock + -+ 1) * dev->nChunksPerBlock)) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("Found daft chunkId %d for %d" TENDSTR), -+ chunkId, i)); -+ } else { -+ in->nDataChunks--; -+ yaffs_DeleteChunk(dev, chunkId, 1, __LINE__); -+ } -+ } -+ } -+ -+} -+ -+int yaffs_ResizeFile(yaffs_Object * in, loff_t newSize) -+{ -+ -+ int oldFileSize = in->variant.fileVariant.fileSize; -+ int newSizeOfPartialChunk; -+ int newFullChunks; -+ -+ yaffs_Device *dev = in->myDev; -+ -+ yaffs_AddrToChunk(dev, newSize, &newFullChunks, &newSizeOfPartialChunk); -+ -+ yaffs_FlushFilesChunkCache(in); -+ yaffs_InvalidateWholeChunkCache(in); -+ -+ yaffs_CheckGarbageCollection(dev); -+ -+ if (in->variantType != YAFFS_OBJECT_TYPE_FILE) { -+ return yaffs_GetFileSize(in); -+ } -+ -+ if (newSize == oldFileSize) { -+ return oldFileSize; -+ } -+ -+ if (newSize < oldFileSize) { -+ -+ yaffs_PruneResizedChunks(in, newSize); -+ -+ if (newSizeOfPartialChunk != 0) { -+ int lastChunk = 1 + newFullChunks; -+ -+ __u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__); -+ -+ /* Got to read and rewrite the last chunk with its new size and zero pad */ -+ yaffs_ReadChunkDataFromObject(in, lastChunk, -+ localBuffer); -+ -+ memset(localBuffer + newSizeOfPartialChunk, 0, -+ dev->nDataBytesPerChunk - newSizeOfPartialChunk); -+ -+ yaffs_WriteChunkDataToObject(in, lastChunk, localBuffer, -+ newSizeOfPartialChunk, 1); -+ -+ yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__); -+ } -+ -+ in->variant.fileVariant.fileSize = newSize; -+ -+ yaffs_PruneFileStructure(dev, &in->variant.fileVariant); -+ } -+ /* Write a new object header. -+ * show we've shrunk the file, if need be -+ * Do this only if the file is not in the deleted directories. -+ */ -+ if (in->parent->objectId != YAFFS_OBJECTID_UNLINKED && -+ in->parent->objectId != YAFFS_OBJECTID_DELETED) { -+ yaffs_UpdateObjectHeader(in, NULL, 0, -+ (newSize < oldFileSize) ? 1 : 0, 0); -+ } -+ -+ return newSize; -+} -+ -+loff_t yaffs_GetFileSize(yaffs_Object * obj) -+{ -+ obj = yaffs_GetEquivalentObject(obj); -+ -+ switch (obj->variantType) { -+ case YAFFS_OBJECT_TYPE_FILE: -+ return obj->variant.fileVariant.fileSize; -+ case YAFFS_OBJECT_TYPE_SYMLINK: -+ return yaffs_strlen(obj->variant.symLinkVariant.alias); -+ default: -+ return 0; -+ } -+} -+ -+ -+ -+int yaffs_FlushFile(yaffs_Object * in, int updateTime) -+{ -+ int retVal; -+ if (in->dirty) { -+ yaffs_FlushFilesChunkCache(in); -+ if (updateTime) { -+#ifdef CONFIG_YAFFS_WINCE -+ yfsd_WinFileTimeNow(in->win_mtime); -+#else -+ -+ in->yst_mtime = Y_CURRENT_TIME; -+ -+#endif -+ } -+ -+ retVal = -+ (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >= -+ 0) ? YAFFS_OK : YAFFS_FAIL; -+ } else { -+ retVal = YAFFS_OK; -+ } -+ -+ return retVal; -+ -+} -+ -+static int yaffs_DoGenericObjectDeletion(yaffs_Object * in) -+{ -+ -+ /* First off, invalidate the file's data in the cache, without flushing. */ -+ yaffs_InvalidateWholeChunkCache(in); -+ -+ if (in->myDev->isYaffs2 && (in->parent != in->myDev->deletedDir)) { -+ /* Move to the unlinked directory so we have a record that it was deleted. */ -+ yaffs_ChangeObjectName(in, in->myDev->deletedDir, NULL, 0, 0); -+ -+ } -+ -+ yaffs_RemoveObjectFromDirectory(in); -+ yaffs_DeleteChunk(in->myDev, in->chunkId, 1, __LINE__); -+ in->chunkId = -1; -+ -+ yaffs_FreeObject(in); -+ return YAFFS_OK; -+ -+} -+ -+/* yaffs_DeleteFile deletes the whole file data -+ * and the inode associated with the file. -+ * It does not delete the links associated with the file. -+ */ -+static int yaffs_UnlinkFile(yaffs_Object * in) -+{ -+ -+ int retVal; -+ int immediateDeletion = 0; -+ -+ if (1) { -+#ifdef __KERNEL__ -+ if (!in->myInode) { -+ immediateDeletion = 1; -+ -+ } -+#else -+ if (in->inUse <= 0) { -+ immediateDeletion = 1; -+ -+ } -+#endif -+ if (immediateDeletion) { -+ retVal = -+ yaffs_ChangeObjectName(in, in->myDev->deletedDir, -+ NULL, 0, 0); -+ T(YAFFS_TRACE_TRACING, -+ (TSTR("yaffs: immediate deletion of file %d" TENDSTR), -+ in->objectId)); -+ in->deleted = 1; -+ in->myDev->nDeletedFiles++; -+ if (0 && in->myDev->isYaffs2) { -+ yaffs_ResizeFile(in, 0); -+ } -+ yaffs_SoftDeleteFile(in); -+ } else { -+ retVal = -+ yaffs_ChangeObjectName(in, in->myDev->unlinkedDir, -+ NULL, 0, 0); -+ } -+ -+ } -+ return retVal; -+} -+ -+int yaffs_DeleteFile(yaffs_Object * in) -+{ -+ int retVal = YAFFS_OK; -+ -+ if (in->nDataChunks > 0) { -+ /* Use soft deletion if there is data in the file */ -+ if (!in->unlinked) { -+ retVal = yaffs_UnlinkFile(in); -+ } -+ if (retVal == YAFFS_OK && in->unlinked && !in->deleted) { -+ in->deleted = 1; -+ in->myDev->nDeletedFiles++; -+ yaffs_SoftDeleteFile(in); -+ } -+ return in->deleted ? YAFFS_OK : YAFFS_FAIL; -+ } else { -+ /* The file has no data chunks so we toss it immediately */ -+ yaffs_FreeTnode(in->myDev, in->variant.fileVariant.top); -+ in->variant.fileVariant.top = NULL; -+ yaffs_DoGenericObjectDeletion(in); -+ -+ return YAFFS_OK; -+ } -+} -+ -+static int yaffs_DeleteDirectory(yaffs_Object * in) -+{ -+ /* First check that the directory is empty. */ -+ if (list_empty(&in->variant.directoryVariant.children)) { -+ return yaffs_DoGenericObjectDeletion(in); -+ } -+ -+ return YAFFS_FAIL; -+ -+} -+ -+static int yaffs_DeleteSymLink(yaffs_Object * in) -+{ -+ YFREE(in->variant.symLinkVariant.alias); -+ -+ return yaffs_DoGenericObjectDeletion(in); -+} -+ -+static int yaffs_DeleteHardLink(yaffs_Object * in) -+{ -+ /* remove this hardlink from the list assocaited with the equivalent -+ * object -+ */ -+ list_del(&in->hardLinks); -+ return yaffs_DoGenericObjectDeletion(in); -+} -+ -+static void yaffs_DestroyObject(yaffs_Object * obj) -+{ -+ switch (obj->variantType) { -+ case YAFFS_OBJECT_TYPE_FILE: -+ yaffs_DeleteFile(obj); -+ break; -+ case YAFFS_OBJECT_TYPE_DIRECTORY: -+ yaffs_DeleteDirectory(obj); -+ break; -+ case YAFFS_OBJECT_TYPE_SYMLINK: -+ yaffs_DeleteSymLink(obj); -+ break; -+ case YAFFS_OBJECT_TYPE_HARDLINK: -+ yaffs_DeleteHardLink(obj); -+ break; -+ case YAFFS_OBJECT_TYPE_SPECIAL: -+ yaffs_DoGenericObjectDeletion(obj); -+ break; -+ case YAFFS_OBJECT_TYPE_UNKNOWN: -+ break; /* should not happen. */ -+ } -+} -+ -+static int yaffs_UnlinkWorker(yaffs_Object * obj) -+{ -+ -+ if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) { -+ return yaffs_DeleteHardLink(obj); -+ } else if (!list_empty(&obj->hardLinks)) { -+ /* Curve ball: We're unlinking an object that has a hardlink. -+ * -+ * This problem arises because we are not strictly following -+ * The Linux link/inode model. -+ * -+ * We can't really delete the object. -+ * Instead, we do the following: -+ * - Select a hardlink. -+ * - Unhook it from the hard links -+ * - Unhook it from its parent directory (so that the rename can work) -+ * - Rename the object to the hardlink's name. -+ * - Delete the hardlink -+ */ -+ -+ yaffs_Object *hl; -+ int retVal; -+ YCHAR name[YAFFS_MAX_NAME_LENGTH + 1]; -+ -+ hl = list_entry(obj->hardLinks.next, yaffs_Object, hardLinks); -+ -+ list_del_init(&hl->hardLinks); -+ list_del_init(&hl->siblings); -+ -+ yaffs_GetObjectName(hl, name, YAFFS_MAX_NAME_LENGTH + 1); -+ -+ retVal = yaffs_ChangeObjectName(obj, hl->parent, name, 0, 0); -+ -+ if (retVal == YAFFS_OK) { -+ retVal = yaffs_DoGenericObjectDeletion(hl); -+ } -+ return retVal; -+ -+ } else { -+ switch (obj->variantType) { -+ case YAFFS_OBJECT_TYPE_FILE: -+ return yaffs_UnlinkFile(obj); -+ break; -+ case YAFFS_OBJECT_TYPE_DIRECTORY: -+ return yaffs_DeleteDirectory(obj); -+ break; -+ case YAFFS_OBJECT_TYPE_SYMLINK: -+ return yaffs_DeleteSymLink(obj); -+ break; -+ case YAFFS_OBJECT_TYPE_SPECIAL: -+ return yaffs_DoGenericObjectDeletion(obj); -+ break; -+ case YAFFS_OBJECT_TYPE_HARDLINK: -+ case YAFFS_OBJECT_TYPE_UNKNOWN: -+ default: -+ return YAFFS_FAIL; -+ } -+ } -+} -+ -+ -+static int yaffs_UnlinkObject( yaffs_Object *obj) -+{ -+ -+ if (obj && obj->unlinkAllowed) { -+ return yaffs_UnlinkWorker(obj); -+ } -+ -+ return YAFFS_FAIL; -+ -+} -+int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name) -+{ -+ yaffs_Object *obj; -+ -+ obj = yaffs_FindObjectByName(dir, name); -+ return yaffs_UnlinkObject(obj); -+} -+ -+/*----------------------- Initialisation Scanning ---------------------- */ -+ -+static void yaffs_HandleShadowedObject(yaffs_Device * dev, int objId, -+ int backwardScanning) -+{ -+ yaffs_Object *obj; -+ -+ if (!backwardScanning) { -+ /* Handle YAFFS1 forward scanning case -+ * For YAFFS1 we always do the deletion -+ */ -+ -+ } else { -+ /* Handle YAFFS2 case (backward scanning) -+ * If the shadowed object exists then ignore. -+ */ -+ if (yaffs_FindObjectByNumber(dev, objId)) { -+ return; -+ } -+ } -+ -+ /* Let's create it (if it does not exist) assuming it is a file so that it can do shrinking etc. -+ * We put it in unlinked dir to be cleaned up after the scanning -+ */ -+ obj = -+ yaffs_FindOrCreateObjectByNumber(dev, objId, -+ YAFFS_OBJECT_TYPE_FILE); -+ yaffs_AddObjectToDirectory(dev->unlinkedDir, obj); -+ obj->variant.fileVariant.shrinkSize = 0; -+ obj->valid = 1; /* So that we don't read any other info for this file */ -+ -+} -+ -+typedef struct { -+ int seq; -+ int block; -+} yaffs_BlockIndex; -+ -+ -+static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList) -+{ -+ yaffs_Object *hl; -+ yaffs_Object *in; -+ -+ while (hardList) { -+ hl = hardList; -+ hardList = (yaffs_Object *) (hardList->hardLinks.next); -+ -+ in = yaffs_FindObjectByNumber(dev, -+ hl->variant.hardLinkVariant. -+ equivalentObjectId); -+ -+ if (in) { -+ /* Add the hardlink pointers */ -+ hl->variant.hardLinkVariant.equivalentObject = in; -+ list_add(&hl->hardLinks, &in->hardLinks); -+ } else { -+ /* Todo Need to report/handle this better. -+ * Got a problem... hardlink to a non-existant object -+ */ -+ hl->variant.hardLinkVariant.equivalentObject = NULL; -+ INIT_LIST_HEAD(&hl->hardLinks); -+ -+ } -+ -+ } -+ -+} -+ -+ -+ -+ -+ -+static int ybicmp(const void *a, const void *b){ -+ register int aseq = ((yaffs_BlockIndex *)a)->seq; -+ register int bseq = ((yaffs_BlockIndex *)b)->seq; -+ register int ablock = ((yaffs_BlockIndex *)a)->block; -+ register int bblock = ((yaffs_BlockIndex *)b)->block; -+ if( aseq == bseq ) -+ return ablock - bblock; -+ else -+ return aseq - bseq; -+ -+} -+ -+static int yaffs_Scan(yaffs_Device * dev) -+{ -+ yaffs_ExtendedTags tags; -+ int blk; -+ int blockIterator; -+ int startIterator; -+ int endIterator; -+ int nBlocksToScan = 0; -+ int result; -+ -+ int chunk; -+ int c; -+ int deleted; -+ yaffs_BlockState state; -+ yaffs_Object *hardList = NULL; -+ yaffs_Object *hl; -+ yaffs_BlockInfo *bi; -+ int sequenceNumber; -+ yaffs_ObjectHeader *oh; -+ yaffs_Object *in; -+ yaffs_Object *parent; -+ int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1; -+ -+ __u8 *chunkData; -+ -+ yaffs_BlockIndex *blockIndex = NULL; -+ -+ if (dev->isYaffs2) { -+ T(YAFFS_TRACE_SCAN, -+ (TSTR("yaffs_Scan is not for YAFFS2!" TENDSTR))); -+ return YAFFS_FAIL; -+ } -+ -+ //TODO Throw all the yaffs2 stuuf out of yaffs_Scan since it is only for yaffs1 format. -+ -+ T(YAFFS_TRACE_SCAN, -+ (TSTR("yaffs_Scan starts intstartblk %d intendblk %d..." TENDSTR), -+ dev->internalStartBlock, dev->internalEndBlock)); -+ -+ chunkData = yaffs_GetTempBuffer(dev, __LINE__); -+ -+ dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER; -+ -+ if (dev->isYaffs2) { -+ blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex)); -+ } -+ -+ /* Scan all the blocks to determine their state */ -+ for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) { -+ bi = yaffs_GetBlockInfo(dev, blk); -+ yaffs_ClearChunkBits(dev, blk); -+ bi->pagesInUse = 0; -+ bi->softDeletions = 0; -+ -+ yaffs_QueryInitialBlockState(dev, blk, &state, &sequenceNumber); -+ -+ bi->blockState = state; -+ bi->sequenceNumber = sequenceNumber; -+ -+ T(YAFFS_TRACE_SCAN_DEBUG, -+ (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk, -+ state, sequenceNumber)); -+ -+ if (state == YAFFS_BLOCK_STATE_DEAD) { -+ T(YAFFS_TRACE_BAD_BLOCKS, -+ (TSTR("block %d is bad" TENDSTR), blk)); -+ } else if (state == YAFFS_BLOCK_STATE_EMPTY) { -+ T(YAFFS_TRACE_SCAN_DEBUG, -+ (TSTR("Block empty " TENDSTR))); -+ dev->nErasedBlocks++; -+ dev->nFreeChunks += dev->nChunksPerBlock; -+ } else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) { -+ -+ /* Determine the highest sequence number */ -+ if (dev->isYaffs2 && -+ sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER && -+ sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) { -+ -+ blockIndex[nBlocksToScan].seq = sequenceNumber; -+ blockIndex[nBlocksToScan].block = blk; -+ -+ nBlocksToScan++; -+ -+ if (sequenceNumber >= dev->sequenceNumber) { -+ dev->sequenceNumber = sequenceNumber; -+ } -+ } else if (dev->isYaffs2) { -+ /* TODO: Nasty sequence number! */ -+ T(YAFFS_TRACE_SCAN, -+ (TSTR -+ ("Block scanning block %d has bad sequence number %d" -+ TENDSTR), blk, sequenceNumber)); -+ -+ } -+ } -+ } -+ -+ /* Sort the blocks -+ * Dungy old bubble sort for now... -+ */ -+ if (dev->isYaffs2) { -+ yaffs_BlockIndex temp; -+ int i; -+ int j; -+ -+ for (i = 0; i < nBlocksToScan; i++) -+ for (j = i + 1; j < nBlocksToScan; j++) -+ if (blockIndex[i].seq > blockIndex[j].seq) { -+ temp = blockIndex[j]; -+ blockIndex[j] = blockIndex[i]; -+ blockIndex[i] = temp; -+ } -+ } -+ -+ /* Now scan the blocks looking at the data. */ -+ if (dev->isYaffs2) { -+ startIterator = 0; -+ endIterator = nBlocksToScan - 1; -+ T(YAFFS_TRACE_SCAN_DEBUG, -+ (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan)); -+ } else { -+ startIterator = dev->internalStartBlock; -+ endIterator = dev->internalEndBlock; -+ } -+ -+ /* For each block.... */ -+ for (blockIterator = startIterator; blockIterator <= endIterator; -+ blockIterator++) { -+ -+ if (dev->isYaffs2) { -+ /* get the block to scan in the correct order */ -+ blk = blockIndex[blockIterator].block; -+ } else { -+ blk = blockIterator; -+ } -+ -+ bi = yaffs_GetBlockInfo(dev, blk); -+ state = bi->blockState; -+ -+ deleted = 0; -+ -+ /* For each chunk in each block that needs scanning....*/ -+ for (c = 0; c < dev->nChunksPerBlock && -+ state == YAFFS_BLOCK_STATE_NEEDS_SCANNING; c++) { -+ /* Read the tags and decide what to do */ -+ chunk = blk * dev->nChunksPerBlock + c; -+ -+ result = yaffs_ReadChunkWithTagsFromNAND(dev, chunk, NULL, -+ &tags); -+ -+ /* Let's have a good look at this chunk... */ -+ -+ if (!dev->isYaffs2 && tags.chunkDeleted) { -+ /* YAFFS1 only... -+ * A deleted chunk -+ */ -+ deleted++; -+ dev->nFreeChunks++; -+ /*T((" %d %d deleted\n",blk,c)); */ -+ } else if (!tags.chunkUsed) { -+ /* An unassigned chunk in the block -+ * This means that either the block is empty or -+ * this is the one being allocated from -+ */ -+ -+ if (c == 0) { -+ /* We're looking at the first chunk in the block so the block is unused */ -+ state = YAFFS_BLOCK_STATE_EMPTY; -+ dev->nErasedBlocks++; -+ } else { -+ /* this is the block being allocated from */ -+ T(YAFFS_TRACE_SCAN, -+ (TSTR -+ (" Allocating from %d %d" TENDSTR), -+ blk, c)); -+ state = YAFFS_BLOCK_STATE_ALLOCATING; -+ dev->allocationBlock = blk; -+ dev->allocationPage = c; -+ dev->allocationBlockFinder = blk; -+ /* Set it to here to encourage the allocator to go forth from here. */ -+ -+ /* Yaffs2 sanity check: -+ * This should be the one with the highest sequence number -+ */ -+ if (dev->isYaffs2 -+ && (dev->sequenceNumber != -+ bi->sequenceNumber)) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("yaffs: Allocation block %d was not highest sequence id:" -+ " block seq = %d, dev seq = %d" -+ TENDSTR), blk,bi->sequenceNumber,dev->sequenceNumber)); -+ } -+ } -+ -+ dev->nFreeChunks += (dev->nChunksPerBlock - c); -+ } else if (tags.chunkId > 0) { -+ /* chunkId > 0 so it is a data chunk... */ -+ unsigned int endpos; -+ -+ yaffs_SetChunkBit(dev, blk, c); -+ bi->pagesInUse++; -+ -+ in = yaffs_FindOrCreateObjectByNumber(dev, -+ tags. -+ objectId, -+ YAFFS_OBJECT_TYPE_FILE); -+ /* PutChunkIntoFile checks for a clash (two data chunks with -+ * the same chunkId). -+ */ -+ yaffs_PutChunkIntoFile(in, tags.chunkId, chunk, -+ 1); -+ endpos = -+ (tags.chunkId - 1) * dev->nDataBytesPerChunk + -+ tags.byteCount; -+ if (in->variantType == YAFFS_OBJECT_TYPE_FILE -+ && in->variant.fileVariant.scannedFileSize < -+ endpos) { -+ in->variant.fileVariant. -+ scannedFileSize = endpos; -+ if (!dev->useHeaderFileSize) { -+ in->variant.fileVariant. -+ fileSize = -+ in->variant.fileVariant. -+ scannedFileSize; -+ } -+ -+ } -+ /* T((" %d %d data %d %d\n",blk,c,tags.objectId,tags.chunkId)); */ -+ } else { -+ /* chunkId == 0, so it is an ObjectHeader. -+ * Thus, we read in the object header and make the object -+ */ -+ yaffs_SetChunkBit(dev, blk, c); -+ bi->pagesInUse++; -+ -+ result = yaffs_ReadChunkWithTagsFromNAND(dev, chunk, -+ chunkData, -+ NULL); -+ -+ oh = (yaffs_ObjectHeader *) chunkData; -+ -+ in = yaffs_FindObjectByNumber(dev, -+ tags.objectId); -+ if (in && in->variantType != oh->type) { -+ /* This should not happen, but somehow -+ * Wev'e ended up with an objectId that has been reused but not yet -+ * deleted, and worse still it has changed type. Delete the old object. -+ */ -+ -+ yaffs_DestroyObject(in); -+ -+ in = 0; -+ } -+ -+ in = yaffs_FindOrCreateObjectByNumber(dev, -+ tags. -+ objectId, -+ oh->type); -+ -+ if (oh->shadowsObject > 0) { -+ yaffs_HandleShadowedObject(dev, -+ oh-> -+ shadowsObject, -+ 0); -+ } -+ -+ if (in->valid) { -+ /* We have already filled this one. We have a duplicate and need to resolve it. */ -+ -+ unsigned existingSerial = in->serial; -+ unsigned newSerial = tags.serialNumber; -+ -+ if (dev->isYaffs2 || -+ ((existingSerial + 1) & 3) == -+ newSerial) { -+ /* Use new one - destroy the exisiting one */ -+ yaffs_DeleteChunk(dev, -+ in->chunkId, -+ 1, __LINE__); -+ in->valid = 0; -+ } else { -+ /* Use existing - destroy this one. */ -+ yaffs_DeleteChunk(dev, chunk, 1, -+ __LINE__); -+ } -+ } -+ -+ if (!in->valid && -+ (tags.objectId == YAFFS_OBJECTID_ROOT || -+ tags.objectId == YAFFS_OBJECTID_LOSTNFOUND)) { -+ /* We only load some info, don't fiddle with directory structure */ -+ in->valid = 1; -+ in->variantType = oh->type; -+ -+ in->yst_mode = oh->yst_mode; -+#ifdef CONFIG_YAFFS_WINCE -+ in->win_atime[0] = oh->win_atime[0]; -+ in->win_ctime[0] = oh->win_ctime[0]; -+ in->win_mtime[0] = oh->win_mtime[0]; -+ in->win_atime[1] = oh->win_atime[1]; -+ in->win_ctime[1] = oh->win_ctime[1]; -+ in->win_mtime[1] = oh->win_mtime[1]; -+#else -+ in->yst_uid = oh->yst_uid; -+ in->yst_gid = oh->yst_gid; -+ in->yst_atime = oh->yst_atime; -+ in->yst_mtime = oh->yst_mtime; -+ in->yst_ctime = oh->yst_ctime; -+ in->yst_rdev = oh->yst_rdev; -+#endif -+ in->chunkId = chunk; -+ -+ } else if (!in->valid) { -+ /* we need to load this info */ -+ -+ in->valid = 1; -+ in->variantType = oh->type; -+ -+ in->yst_mode = oh->yst_mode; -+#ifdef CONFIG_YAFFS_WINCE -+ in->win_atime[0] = oh->win_atime[0]; -+ in->win_ctime[0] = oh->win_ctime[0]; -+ in->win_mtime[0] = oh->win_mtime[0]; -+ in->win_atime[1] = oh->win_atime[1]; -+ in->win_ctime[1] = oh->win_ctime[1]; -+ in->win_mtime[1] = oh->win_mtime[1]; -+#else -+ in->yst_uid = oh->yst_uid; -+ in->yst_gid = oh->yst_gid; -+ in->yst_atime = oh->yst_atime; -+ in->yst_mtime = oh->yst_mtime; -+ in->yst_ctime = oh->yst_ctime; -+ in->yst_rdev = oh->yst_rdev; -+#endif -+ in->chunkId = chunk; -+ -+ yaffs_SetObjectName(in, oh->name); -+ in->dirty = 0; -+ -+ /* directory stuff... -+ * hook up to parent -+ */ -+ -+ parent = -+ yaffs_FindOrCreateObjectByNumber -+ (dev, oh->parentObjectId, -+ YAFFS_OBJECT_TYPE_DIRECTORY); -+ if (parent->variantType == -+ YAFFS_OBJECT_TYPE_UNKNOWN) { -+ /* Set up as a directory */ -+ parent->variantType = -+ YAFFS_OBJECT_TYPE_DIRECTORY; -+ INIT_LIST_HEAD(&parent->variant. -+ directoryVariant. -+ children); -+ } else if (parent->variantType != -+ YAFFS_OBJECT_TYPE_DIRECTORY) -+ { -+ /* Hoosterman, another problem.... -+ * We're trying to use a non-directory as a directory -+ */ -+ -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("yaffs tragedy: attempting to use non-directory as" -+ " a directory in scan. Put in lost+found." -+ TENDSTR))); -+ parent = dev->lostNFoundDir; -+ } -+ -+ yaffs_AddObjectToDirectory(parent, in); -+ -+ if (0 && (parent == dev->deletedDir || -+ parent == dev->unlinkedDir)) { -+ in->deleted = 1; /* If it is unlinked at start up then it wants deleting */ -+ dev->nDeletedFiles++; -+ } -+ /* Note re hardlinks. -+ * Since we might scan a hardlink before its equivalent object is scanned -+ * we put them all in a list. -+ * After scanning is complete, we should have all the objects, so we run through this -+ * list and fix up all the chains. -+ */ -+ -+ switch (in->variantType) { -+ case YAFFS_OBJECT_TYPE_UNKNOWN: -+ /* Todo got a problem */ -+ break; -+ case YAFFS_OBJECT_TYPE_FILE: -+ if (dev->isYaffs2 -+ && oh->isShrink) { -+ /* Prune back the shrunken chunks */ -+ yaffs_PruneResizedChunks -+ (in, oh->fileSize); -+ /* Mark the block as having a shrinkHeader */ -+ bi->hasShrinkHeader = 1; -+ } -+ -+ if (dev->useHeaderFileSize) -+ -+ in->variant.fileVariant. -+ fileSize = -+ oh->fileSize; -+ -+ break; -+ case YAFFS_OBJECT_TYPE_HARDLINK: -+ in->variant.hardLinkVariant. -+ equivalentObjectId = -+ oh->equivalentObjectId; -+ in->hardLinks.next = -+ (struct list_head *) -+ hardList; -+ hardList = in; -+ break; -+ case YAFFS_OBJECT_TYPE_DIRECTORY: -+ /* Do nothing */ -+ break; -+ case YAFFS_OBJECT_TYPE_SPECIAL: -+ /* Do nothing */ -+ break; -+ case YAFFS_OBJECT_TYPE_SYMLINK: -+ in->variant.symLinkVariant. -+ alias = -+ yaffs_CloneString(oh->alias); -+ break; -+ } -+ -+ if (parent == dev->deletedDir) { -+ yaffs_DestroyObject(in); -+ bi->hasShrinkHeader = 1; -+ } -+ } -+ } -+ } -+ -+ if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) { -+ /* If we got this far while scanning, then the block is fully allocated.*/ -+ state = YAFFS_BLOCK_STATE_FULL; -+ } -+ -+ bi->blockState = state; -+ -+ /* Now let's see if it was dirty */ -+ if (bi->pagesInUse == 0 && -+ !bi->hasShrinkHeader && -+ bi->blockState == YAFFS_BLOCK_STATE_FULL) { -+ yaffs_BlockBecameDirty(dev, blk); -+ } -+ -+ } -+ -+ if (blockIndex) { -+ YFREE(blockIndex); -+ } -+ -+ -+ /* Ok, we've done all the scanning. -+ * Fix up the hard link chains. -+ * We should now have scanned all the objects, now it's time to add these -+ * hardlinks. -+ */ -+ -+ yaffs_HardlinkFixup(dev,hardList); -+ -+ /* Handle the unlinked files. Since they were left in an unlinked state we should -+ * just delete them. -+ */ -+ { -+ struct list_head *i; -+ struct list_head *n; -+ -+ yaffs_Object *l; -+ /* Soft delete all the unlinked files */ -+ list_for_each_safe(i, n, -+ &dev->unlinkedDir->variant.directoryVariant. -+ children) { -+ if (i) { -+ l = list_entry(i, yaffs_Object, siblings); -+ yaffs_DestroyObject(l); -+ } -+ } -+ } -+ -+ yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__); -+ -+ T(YAFFS_TRACE_SCAN, (TSTR("yaffs_Scan ends" TENDSTR))); -+ -+ return YAFFS_OK; -+} -+ -+static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in) -+{ -+ __u8 *chunkData; -+ yaffs_ObjectHeader *oh; -+ yaffs_Device *dev = in->myDev; -+ yaffs_ExtendedTags tags; -+ int result; -+ -+#if 0 -+ T(YAFFS_TRACE_SCAN,(TSTR("details for object %d %s loaded" TENDSTR), -+ in->objectId, -+ in->lazyLoaded ? "not yet" : "already")); -+#endif -+ -+ if(in->lazyLoaded){ -+ in->lazyLoaded = 0; -+ chunkData = yaffs_GetTempBuffer(dev, __LINE__); -+ -+ result = yaffs_ReadChunkWithTagsFromNAND(dev,in->chunkId,chunkData,&tags); -+ oh = (yaffs_ObjectHeader *) chunkData; -+ -+ in->yst_mode = oh->yst_mode; -+#ifdef CONFIG_YAFFS_WINCE -+ in->win_atime[0] = oh->win_atime[0]; -+ in->win_ctime[0] = oh->win_ctime[0]; -+ in->win_mtime[0] = oh->win_mtime[0]; -+ in->win_atime[1] = oh->win_atime[1]; -+ in->win_ctime[1] = oh->win_ctime[1]; -+ in->win_mtime[1] = oh->win_mtime[1]; -+#else -+ in->yst_uid = oh->yst_uid; -+ in->yst_gid = oh->yst_gid; -+ in->yst_atime = oh->yst_atime; -+ in->yst_mtime = oh->yst_mtime; -+ in->yst_ctime = oh->yst_ctime; -+ in->yst_rdev = oh->yst_rdev; -+ -+#endif -+ yaffs_SetObjectName(in, oh->name); -+ -+ if(in->variantType == YAFFS_OBJECT_TYPE_SYMLINK) -+ in->variant.symLinkVariant.alias = -+ yaffs_CloneString(oh->alias); -+ -+ yaffs_ReleaseTempBuffer(dev,chunkData, __LINE__); -+ } -+} -+ -+static int yaffs_ScanBackwards(yaffs_Device * dev) -+{ -+ yaffs_ExtendedTags tags; -+ int blk; -+ int blockIterator; -+ int startIterator; -+ int endIterator; -+ int nBlocksToScan = 0; -+ -+ int chunk; -+ int result; -+ int c; -+ int deleted; -+ yaffs_BlockState state; -+ yaffs_Object *hardList = NULL; -+ yaffs_BlockInfo *bi; -+ int sequenceNumber; -+ yaffs_ObjectHeader *oh; -+ yaffs_Object *in; -+ yaffs_Object *parent; -+ int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1; -+ int itsUnlinked; -+ __u8 *chunkData; -+ -+ int fileSize; -+ int isShrink; -+ int foundChunksInBlock; -+ int equivalentObjectId; -+ -+ -+ yaffs_BlockIndex *blockIndex = NULL; -+ int altBlockIndex = 0; -+ -+ if (!dev->isYaffs2) { -+ T(YAFFS_TRACE_SCAN, -+ (TSTR("yaffs_ScanBackwards is only for YAFFS2!" TENDSTR))); -+ return YAFFS_FAIL; -+ } -+ -+ T(YAFFS_TRACE_SCAN, -+ (TSTR -+ ("yaffs_ScanBackwards starts intstartblk %d intendblk %d..." -+ TENDSTR), dev->internalStartBlock, dev->internalEndBlock)); -+ -+ -+ dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER; -+ -+ blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex)); -+ -+ if(!blockIndex) { -+ blockIndex = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockIndex)); -+ altBlockIndex = 1; -+ } -+ -+ if(!blockIndex) { -+ T(YAFFS_TRACE_SCAN, -+ (TSTR("yaffs_Scan() could not allocate block index!" TENDSTR))); -+ return YAFFS_FAIL; -+ } -+ -+ chunkData = yaffs_GetTempBuffer(dev, __LINE__); -+ -+ /* Scan all the blocks to determine their state */ -+ for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) { -+ bi = yaffs_GetBlockInfo(dev, blk); -+ yaffs_ClearChunkBits(dev, blk); -+ bi->pagesInUse = 0; -+ bi->softDeletions = 0; -+ -+ yaffs_QueryInitialBlockState(dev, blk, &state, &sequenceNumber); -+ -+ bi->blockState = state; -+ bi->sequenceNumber = sequenceNumber; -+ -+ if(bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA) -+ bi->blockState = state = YAFFS_BLOCK_STATE_CHECKPOINT; -+ -+ T(YAFFS_TRACE_SCAN_DEBUG, -+ (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk, -+ state, sequenceNumber)); -+ -+ -+ if(state == YAFFS_BLOCK_STATE_CHECKPOINT){ -+ /* todo .. fix free space ? */ -+ -+ } else if (state == YAFFS_BLOCK_STATE_DEAD) { -+ T(YAFFS_TRACE_BAD_BLOCKS, -+ (TSTR("block %d is bad" TENDSTR), blk)); -+ } else if (state == YAFFS_BLOCK_STATE_EMPTY) { -+ T(YAFFS_TRACE_SCAN_DEBUG, -+ (TSTR("Block empty " TENDSTR))); -+ dev->nErasedBlocks++; -+ dev->nFreeChunks += dev->nChunksPerBlock; -+ } else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) { -+ -+ /* Determine the highest sequence number */ -+ if (dev->isYaffs2 && -+ sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER && -+ sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) { -+ -+ blockIndex[nBlocksToScan].seq = sequenceNumber; -+ blockIndex[nBlocksToScan].block = blk; -+ -+ nBlocksToScan++; -+ -+ if (sequenceNumber >= dev->sequenceNumber) { -+ dev->sequenceNumber = sequenceNumber; -+ } -+ } else if (dev->isYaffs2) { -+ /* TODO: Nasty sequence number! */ -+ T(YAFFS_TRACE_SCAN, -+ (TSTR -+ ("Block scanning block %d has bad sequence number %d" -+ TENDSTR), blk, sequenceNumber)); -+ -+ } -+ } -+ } -+ -+ T(YAFFS_TRACE_SCAN, -+ (TSTR("%d blocks to be sorted..." TENDSTR), nBlocksToScan)); -+ -+ -+ -+ YYIELD(); -+ -+ /* Sort the blocks */ -+#ifndef CONFIG_YAFFS_USE_OWN_SORT -+ { -+ /* Use qsort now. */ -+ qsort(blockIndex, nBlocksToScan, sizeof(yaffs_BlockIndex), ybicmp); -+ } -+#else -+ { -+ /* Dungy old bubble sort... */ -+ -+ yaffs_BlockIndex temp; -+ int i; -+ int j; -+ -+ for (i = 0; i < nBlocksToScan; i++) -+ for (j = i + 1; j < nBlocksToScan; j++) -+ if (blockIndex[i].seq > blockIndex[j].seq) { -+ temp = blockIndex[j]; -+ blockIndex[j] = blockIndex[i]; -+ blockIndex[i] = temp; -+ } -+ } -+#endif -+ -+ YYIELD(); -+ -+ T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR))); -+ -+ /* Now scan the blocks looking at the data. */ -+ startIterator = 0; -+ endIterator = nBlocksToScan - 1; -+ T(YAFFS_TRACE_SCAN_DEBUG, -+ (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan)); -+ -+ /* For each block.... backwards */ -+ for (blockIterator = endIterator; blockIterator >= startIterator; -+ blockIterator--) { -+ /* Cooperative multitasking! This loop can run for so -+ long that watchdog timers expire. */ -+ YYIELD(); -+ -+ /* get the block to scan in the correct order */ -+ blk = blockIndex[blockIterator].block; -+ -+ bi = yaffs_GetBlockInfo(dev, blk); -+ state = bi->blockState; -+ -+ deleted = 0; -+ -+ /* For each chunk in each block that needs scanning.... */ -+ foundChunksInBlock = 0; -+ for (c = dev->nChunksPerBlock - 1; c >= 0 && -+ (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING || -+ state == YAFFS_BLOCK_STATE_ALLOCATING); c--) { -+ /* Scan backwards... -+ * Read the tags and decide what to do -+ */ -+ chunk = blk * dev->nChunksPerBlock + c; -+ -+ result = yaffs_ReadChunkWithTagsFromNAND(dev, chunk, NULL, -+ &tags); -+ -+ /* Let's have a good look at this chunk... */ -+ -+ if (!tags.chunkUsed) { -+ /* An unassigned chunk in the block. -+ * If there are used chunks after this one, then -+ * it is a chunk that was skipped due to failing the erased -+ * check. Just skip it so that it can be deleted. -+ * But, more typically, We get here when this is an unallocated -+ * chunk and his means that either the block is empty or -+ * this is the one being allocated from -+ */ -+ -+ if(foundChunksInBlock) -+ { -+ /* This is a chunk that was skipped due to failing the erased check */ -+ -+ } else if (c == 0) { -+ /* We're looking at the first chunk in the block so the block is unused */ -+ state = YAFFS_BLOCK_STATE_EMPTY; -+ dev->nErasedBlocks++; -+ } else { -+ if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING || -+ state == YAFFS_BLOCK_STATE_ALLOCATING) { -+ if(dev->sequenceNumber == bi->sequenceNumber) { -+ /* this is the block being allocated from */ -+ -+ T(YAFFS_TRACE_SCAN, -+ (TSTR -+ (" Allocating from %d %d" -+ TENDSTR), blk, c)); -+ -+ state = YAFFS_BLOCK_STATE_ALLOCATING; -+ dev->allocationBlock = blk; -+ dev->allocationPage = c; -+ dev->allocationBlockFinder = blk; -+ } -+ else { -+ /* This is a partially written block that is not -+ * the current allocation block. This block must have -+ * had a write failure, so set up for retirement. -+ */ -+ -+ bi->needsRetiring = 1; -+ bi->gcPrioritise = 1; -+ -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("Partially written block %d being set for retirement" TENDSTR), -+ blk)); -+ } -+ -+ } -+ -+ } -+ -+ dev->nFreeChunks++; -+ -+ } else if (tags.chunkId > 0) { -+ /* chunkId > 0 so it is a data chunk... */ -+ unsigned int endpos; -+ __u32 chunkBase = -+ (tags.chunkId - 1) * dev->nDataBytesPerChunk; -+ -+ foundChunksInBlock = 1; -+ -+ -+ yaffs_SetChunkBit(dev, blk, c); -+ bi->pagesInUse++; -+ -+ in = yaffs_FindOrCreateObjectByNumber(dev, -+ tags. -+ objectId, -+ YAFFS_OBJECT_TYPE_FILE); -+ if (in->variantType == YAFFS_OBJECT_TYPE_FILE -+ && chunkBase < -+ in->variant.fileVariant.shrinkSize) { -+ /* This has not been invalidated by a resize */ -+ yaffs_PutChunkIntoFile(in, tags.chunkId, -+ chunk, -1); -+ -+ /* File size is calculated by looking at the data chunks if we have not -+ * seen an object header yet. Stop this practice once we find an object header. -+ */ -+ endpos = -+ (tags.chunkId - -+ 1) * dev->nDataBytesPerChunk + -+ tags.byteCount; -+ -+ if (!in->valid && /* have not got an object header yet */ -+ in->variant.fileVariant. -+ scannedFileSize < endpos) { -+ in->variant.fileVariant. -+ scannedFileSize = endpos; -+ in->variant.fileVariant. -+ fileSize = -+ in->variant.fileVariant. -+ scannedFileSize; -+ } -+ -+ } else { -+ /* This chunk has been invalidated by a resize, so delete */ -+ yaffs_DeleteChunk(dev, chunk, 1, __LINE__); -+ -+ } -+ } else { -+ /* chunkId == 0, so it is an ObjectHeader. -+ * Thus, we read in the object header and make the object -+ */ -+ foundChunksInBlock = 1; -+ -+ yaffs_SetChunkBit(dev, blk, c); -+ bi->pagesInUse++; -+ -+ oh = NULL; -+ in = NULL; -+ -+ if (tags.extraHeaderInfoAvailable) { -+ in = yaffs_FindOrCreateObjectByNumber -+ (dev, tags.objectId, -+ tags.extraObjectType); -+ } -+ -+ if (!in || -+#ifdef CONFIG_YAFFS_DISABLE_LAZY_LOAD -+ !in->valid || -+#endif -+ tags.extraShadows || -+ (!in->valid && -+ (tags.objectId == YAFFS_OBJECTID_ROOT || -+ tags.objectId == YAFFS_OBJECTID_LOSTNFOUND)) -+ ) { -+ -+ /* If we don't have valid info then we need to read the chunk -+ * TODO In future we can probably defer reading the chunk and -+ * living with invalid data until needed. -+ */ -+ -+ result = yaffs_ReadChunkWithTagsFromNAND(dev, -+ chunk, -+ chunkData, -+ NULL); -+ -+ oh = (yaffs_ObjectHeader *) chunkData; -+ -+ if (!in) -+ in = yaffs_FindOrCreateObjectByNumber(dev, tags.objectId, oh->type); -+ -+ } -+ -+ if (!in) { -+ /* TODO Hoosterman we have a problem! */ -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("yaffs tragedy: Could not make object for object %d " -+ "at chunk %d during scan" -+ TENDSTR), tags.objectId, chunk)); -+ -+ } -+ -+ if (in->valid) { -+ /* We have already filled this one. -+ * We have a duplicate that will be discarded, but -+ * we first have to suck out resize info if it is a file. -+ */ -+ -+ if ((in->variantType == YAFFS_OBJECT_TYPE_FILE) && -+ ((oh && -+ oh-> type == YAFFS_OBJECT_TYPE_FILE)|| -+ (tags.extraHeaderInfoAvailable && -+ tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE)) -+ ) { -+ __u32 thisSize = -+ (oh) ? oh->fileSize : tags. -+ extraFileLength; -+ __u32 parentObjectId = -+ (oh) ? oh-> -+ parentObjectId : tags. -+ extraParentObjectId; -+ unsigned isShrink = -+ (oh) ? oh->isShrink : tags. -+ extraIsShrinkHeader; -+ -+ /* If it is deleted (unlinked at start also means deleted) -+ * we treat the file size as being zeroed at this point. -+ */ -+ if (parentObjectId == -+ YAFFS_OBJECTID_DELETED -+ || parentObjectId == -+ YAFFS_OBJECTID_UNLINKED) { -+ thisSize = 0; -+ isShrink = 1; -+ } -+ -+ if (isShrink && -+ in->variant.fileVariant. -+ shrinkSize > thisSize) { -+ in->variant.fileVariant. -+ shrinkSize = -+ thisSize; -+ } -+ -+ if (isShrink) { -+ bi->hasShrinkHeader = 1; -+ } -+ -+ } -+ /* Use existing - destroy this one. */ -+ yaffs_DeleteChunk(dev, chunk, 1, __LINE__); -+ -+ } -+ -+ if (!in->valid && -+ (tags.objectId == YAFFS_OBJECTID_ROOT || -+ tags.objectId == -+ YAFFS_OBJECTID_LOSTNFOUND)) { -+ /* We only load some info, don't fiddle with directory structure */ -+ in->valid = 1; -+ -+ if(oh) { -+ in->variantType = oh->type; -+ -+ in->yst_mode = oh->yst_mode; -+#ifdef CONFIG_YAFFS_WINCE -+ in->win_atime[0] = oh->win_atime[0]; -+ in->win_ctime[0] = oh->win_ctime[0]; -+ in->win_mtime[0] = oh->win_mtime[0]; -+ in->win_atime[1] = oh->win_atime[1]; -+ in->win_ctime[1] = oh->win_ctime[1]; -+ in->win_mtime[1] = oh->win_mtime[1]; -+#else -+ in->yst_uid = oh->yst_uid; -+ in->yst_gid = oh->yst_gid; -+ in->yst_atime = oh->yst_atime; -+ in->yst_mtime = oh->yst_mtime; -+ in->yst_ctime = oh->yst_ctime; -+ in->yst_rdev = oh->yst_rdev; -+ -+#endif -+ } else { -+ in->variantType = tags.extraObjectType; -+ in->lazyLoaded = 1; -+ } -+ -+ in->chunkId = chunk; -+ -+ } else if (!in->valid) { -+ /* we need to load this info */ -+ -+ in->valid = 1; -+ in->chunkId = chunk; -+ -+ if(oh) { -+ in->variantType = oh->type; -+ -+ in->yst_mode = oh->yst_mode; -+#ifdef CONFIG_YAFFS_WINCE -+ in->win_atime[0] = oh->win_atime[0]; -+ in->win_ctime[0] = oh->win_ctime[0]; -+ in->win_mtime[0] = oh->win_mtime[0]; -+ in->win_atime[1] = oh->win_atime[1]; -+ in->win_ctime[1] = oh->win_ctime[1]; -+ in->win_mtime[1] = oh->win_mtime[1]; -+#else -+ in->yst_uid = oh->yst_uid; -+ in->yst_gid = oh->yst_gid; -+ in->yst_atime = oh->yst_atime; -+ in->yst_mtime = oh->yst_mtime; -+ in->yst_ctime = oh->yst_ctime; -+ in->yst_rdev = oh->yst_rdev; -+#endif -+ -+ if (oh->shadowsObject > 0) -+ yaffs_HandleShadowedObject(dev, -+ oh-> -+ shadowsObject, -+ 1); -+ -+ -+ yaffs_SetObjectName(in, oh->name); -+ parent = -+ yaffs_FindOrCreateObjectByNumber -+ (dev, oh->parentObjectId, -+ YAFFS_OBJECT_TYPE_DIRECTORY); -+ -+ fileSize = oh->fileSize; -+ isShrink = oh->isShrink; -+ equivalentObjectId = oh->equivalentObjectId; -+ -+ } -+ else { -+ in->variantType = tags.extraObjectType; -+ parent = -+ yaffs_FindOrCreateObjectByNumber -+ (dev, tags.extraParentObjectId, -+ YAFFS_OBJECT_TYPE_DIRECTORY); -+ fileSize = tags.extraFileLength; -+ isShrink = tags.extraIsShrinkHeader; -+ equivalentObjectId = tags.extraEquivalentObjectId; -+ in->lazyLoaded = 1; -+ -+ } -+ in->dirty = 0; -+ -+ /* directory stuff... -+ * hook up to parent -+ */ -+ -+ if (parent->variantType == -+ YAFFS_OBJECT_TYPE_UNKNOWN) { -+ /* Set up as a directory */ -+ parent->variantType = -+ YAFFS_OBJECT_TYPE_DIRECTORY; -+ INIT_LIST_HEAD(&parent->variant. -+ directoryVariant. -+ children); -+ } else if (parent->variantType != -+ YAFFS_OBJECT_TYPE_DIRECTORY) -+ { -+ /* Hoosterman, another problem.... -+ * We're trying to use a non-directory as a directory -+ */ -+ -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("yaffs tragedy: attempting to use non-directory as" -+ " a directory in scan. Put in lost+found." -+ TENDSTR))); -+ parent = dev->lostNFoundDir; -+ } -+ -+ yaffs_AddObjectToDirectory(parent, in); -+ -+ itsUnlinked = (parent == dev->deletedDir) || -+ (parent == dev->unlinkedDir); -+ -+ if (isShrink) { -+ /* Mark the block as having a shrinkHeader */ -+ bi->hasShrinkHeader = 1; -+ } -+ -+ /* Note re hardlinks. -+ * Since we might scan a hardlink before its equivalent object is scanned -+ * we put them all in a list. -+ * After scanning is complete, we should have all the objects, so we run -+ * through this list and fix up all the chains. -+ */ -+ -+ switch (in->variantType) { -+ case YAFFS_OBJECT_TYPE_UNKNOWN: -+ /* Todo got a problem */ -+ break; -+ case YAFFS_OBJECT_TYPE_FILE: -+ -+ if (in->variant.fileVariant. -+ scannedFileSize < fileSize) { -+ /* This covers the case where the file size is greater -+ * than where the data is -+ * This will happen if the file is resized to be larger -+ * than its current data extents. -+ */ -+ in->variant.fileVariant.fileSize = fileSize; -+ in->variant.fileVariant.scannedFileSize = -+ in->variant.fileVariant.fileSize; -+ } -+ -+ if (isShrink && -+ in->variant.fileVariant.shrinkSize > fileSize) { -+ in->variant.fileVariant.shrinkSize = fileSize; -+ } -+ -+ break; -+ case YAFFS_OBJECT_TYPE_HARDLINK: -+ if(!itsUnlinked) { -+ in->variant.hardLinkVariant.equivalentObjectId = -+ equivalentObjectId; -+ in->hardLinks.next = -+ (struct list_head *) hardList; -+ hardList = in; -+ } -+ break; -+ case YAFFS_OBJECT_TYPE_DIRECTORY: -+ /* Do nothing */ -+ break; -+ case YAFFS_OBJECT_TYPE_SPECIAL: -+ /* Do nothing */ -+ break; -+ case YAFFS_OBJECT_TYPE_SYMLINK: -+ if(oh) -+ in->variant.symLinkVariant.alias = -+ yaffs_CloneString(oh-> -+ alias); -+ break; -+ } -+ -+ } -+ } -+ } -+ -+ if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) { -+ /* If we got this far while scanning, then the block is fully allocated. */ -+ state = YAFFS_BLOCK_STATE_FULL; -+ } -+ -+ bi->blockState = state; -+ -+ /* Now let's see if it was dirty */ -+ if (bi->pagesInUse == 0 && -+ !bi->hasShrinkHeader && -+ bi->blockState == YAFFS_BLOCK_STATE_FULL) { -+ yaffs_BlockBecameDirty(dev, blk); -+ } -+ -+ } -+ -+ if (altBlockIndex) -+ YFREE_ALT(blockIndex); -+ else -+ YFREE(blockIndex); -+ -+ /* Ok, we've done all the scanning. -+ * Fix up the hard link chains. -+ * We should now have scanned all the objects, now it's time to add these -+ * hardlinks. -+ */ -+ yaffs_HardlinkFixup(dev,hardList); -+ -+ -+ /* -+ * Sort out state of unlinked and deleted objects. -+ */ -+ { -+ struct list_head *i; -+ struct list_head *n; -+ -+ yaffs_Object *l; -+ -+ /* Soft delete all the unlinked files */ -+ list_for_each_safe(i, n, -+ &dev->unlinkedDir->variant.directoryVariant. -+ children) { -+ if (i) { -+ l = list_entry(i, yaffs_Object, siblings); -+ yaffs_DestroyObject(l); -+ } -+ } -+ -+ /* Soft delete all the deletedDir files */ -+ list_for_each_safe(i, n, -+ &dev->deletedDir->variant.directoryVariant. -+ children) { -+ if (i) { -+ l = list_entry(i, yaffs_Object, siblings); -+ yaffs_DestroyObject(l); -+ -+ } -+ } -+ } -+ -+ yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__); -+ -+ T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR))); -+ -+ return YAFFS_OK; -+} -+ -+/*------------------------------ Directory Functions ----------------------------- */ -+ -+static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj) -+{ -+ yaffs_Device *dev = obj->myDev; -+ -+ if(dev && dev->removeObjectCallback) -+ dev->removeObjectCallback(obj); -+ -+ list_del_init(&obj->siblings); -+ obj->parent = NULL; -+} -+ -+ -+static void yaffs_AddObjectToDirectory(yaffs_Object * directory, -+ yaffs_Object * obj) -+{ -+ -+ if (!directory) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("tragedy: Trying to add an object to a null pointer directory" -+ TENDSTR))); -+ YBUG(); -+ } -+ if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("tragedy: Trying to add an object to a non-directory" -+ TENDSTR))); -+ YBUG(); -+ } -+ -+ if (obj->siblings.prev == NULL) { -+ /* Not initialised */ -+ INIT_LIST_HEAD(&obj->siblings); -+ -+ } else if (!list_empty(&obj->siblings)) { -+ /* If it is holed up somewhere else, un hook it */ -+ yaffs_RemoveObjectFromDirectory(obj); -+ } -+ /* Now add it */ -+ list_add(&obj->siblings, &directory->variant.directoryVariant.children); -+ obj->parent = directory; -+ -+ if (directory == obj->myDev->unlinkedDir -+ || directory == obj->myDev->deletedDir) { -+ obj->unlinked = 1; -+ obj->myDev->nUnlinkedFiles++; -+ obj->renameAllowed = 0; -+ } -+} -+ -+yaffs_Object *yaffs_FindObjectByName(yaffs_Object * directory, -+ const YCHAR * name) -+{ -+ int sum; -+ -+ struct list_head *i; -+ YCHAR buffer[YAFFS_MAX_NAME_LENGTH + 1]; -+ -+ yaffs_Object *l; -+ -+ if (!name) { -+ return NULL; -+ } -+ -+ if (!directory) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("tragedy: yaffs_FindObjectByName: null pointer directory" -+ TENDSTR))); -+ YBUG(); -+ } -+ if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR))); -+ YBUG(); -+ } -+ -+ sum = yaffs_CalcNameSum(name); -+ -+ list_for_each(i, &directory->variant.directoryVariant.children) { -+ if (i) { -+ l = list_entry(i, yaffs_Object, siblings); -+ -+ yaffs_CheckObjectDetailsLoaded(l); -+ -+ /* Special case for lost-n-found */ -+ if (l->objectId == YAFFS_OBJECTID_LOSTNFOUND) { -+ if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0) { -+ return l; -+ } -+ } else if (yaffs_SumCompare(l->sum, sum) || l->chunkId <= 0) -+ { -+ /* LostnFound cunk called Objxxx -+ * Do a real check -+ */ -+ yaffs_GetObjectName(l, buffer, -+ YAFFS_MAX_NAME_LENGTH); -+ if (yaffs_strcmp(name, buffer) == 0) { -+ return l; -+ } -+ -+ } -+ } -+ } -+ -+ return NULL; -+} -+ -+ -+#if 0 -+int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir, -+ int (*fn) (yaffs_Object *)) -+{ -+ struct list_head *i; -+ yaffs_Object *l; -+ -+ if (!theDir) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("tragedy: yaffs_FindObjectByName: null pointer directory" -+ TENDSTR))); -+ YBUG(); -+ } -+ if (theDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR))); -+ YBUG(); -+ } -+ -+ list_for_each(i, &theDir->variant.directoryVariant.children) { -+ if (i) { -+ l = list_entry(i, yaffs_Object, siblings); -+ if (l && !fn(l)) { -+ return YAFFS_FAIL; -+ } -+ } -+ } -+ -+ return YAFFS_OK; -+ -+} -+#endif -+ -+/* GetEquivalentObject dereferences any hard links to get to the -+ * actual object. -+ */ -+ -+yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj) -+{ -+ if (obj && obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) { -+ /* We want the object id of the equivalent object, not this one */ -+ obj = obj->variant.hardLinkVariant.equivalentObject; -+ } -+ return obj; -+ -+} -+ -+int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize) -+{ -+ memset(name, 0, buffSize * sizeof(YCHAR)); -+ -+ yaffs_CheckObjectDetailsLoaded(obj); -+ -+ if (obj->objectId == YAFFS_OBJECTID_LOSTNFOUND) { -+ yaffs_strncpy(name, YAFFS_LOSTNFOUND_NAME, buffSize - 1); -+ } else if (obj->chunkId <= 0) { -+ YCHAR locName[20]; -+ /* make up a name */ -+ yaffs_sprintf(locName, _Y("%s%d"), YAFFS_LOSTNFOUND_PREFIX, -+ obj->objectId); -+ yaffs_strncpy(name, locName, buffSize - 1); -+ -+ } -+#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM -+ else if (obj->shortName[0]) { -+ yaffs_strcpy(name, obj->shortName); -+ } -+#endif -+ else { -+ int result; -+ __u8 *buffer = yaffs_GetTempBuffer(obj->myDev, __LINE__); -+ -+ yaffs_ObjectHeader *oh = (yaffs_ObjectHeader *) buffer; -+ -+ memset(buffer, 0, obj->myDev->nDataBytesPerChunk); -+ -+ if (obj->chunkId >= 0) { -+ result = yaffs_ReadChunkWithTagsFromNAND(obj->myDev, -+ obj->chunkId, buffer, -+ NULL); -+ } -+ yaffs_strncpy(name, oh->name, buffSize - 1); -+ -+ yaffs_ReleaseTempBuffer(obj->myDev, buffer, __LINE__); -+ } -+ -+ return yaffs_strlen(name); -+} -+ -+int yaffs_GetObjectFileLength(yaffs_Object * obj) -+{ -+ -+ /* Dereference any hard linking */ -+ obj = yaffs_GetEquivalentObject(obj); -+ -+ if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) { -+ return obj->variant.fileVariant.fileSize; -+ } -+ if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) { -+ return yaffs_strlen(obj->variant.symLinkVariant.alias); -+ } else { -+ /* Only a directory should drop through to here */ -+ return obj->myDev->nDataBytesPerChunk; -+ } -+} -+ -+int yaffs_GetObjectLinkCount(yaffs_Object * obj) -+{ -+ int count = 0; -+ struct list_head *i; -+ -+ if (!obj->unlinked) { -+ count++; /* the object itself */ -+ } -+ list_for_each(i, &obj->hardLinks) { -+ count++; /* add the hard links; */ -+ } -+ return count; -+ -+} -+ -+int yaffs_GetObjectInode(yaffs_Object * obj) -+{ -+ obj = yaffs_GetEquivalentObject(obj); -+ -+ return obj->objectId; -+} -+ -+unsigned yaffs_GetObjectType(yaffs_Object * obj) -+{ -+ obj = yaffs_GetEquivalentObject(obj); -+ -+ switch (obj->variantType) { -+ case YAFFS_OBJECT_TYPE_FILE: -+ return DT_REG; -+ break; -+ case YAFFS_OBJECT_TYPE_DIRECTORY: -+ return DT_DIR; -+ break; -+ case YAFFS_OBJECT_TYPE_SYMLINK: -+ return DT_LNK; -+ break; -+ case YAFFS_OBJECT_TYPE_HARDLINK: -+ return DT_REG; -+ break; -+ case YAFFS_OBJECT_TYPE_SPECIAL: -+ if (S_ISFIFO(obj->yst_mode)) -+ return DT_FIFO; -+ if (S_ISCHR(obj->yst_mode)) -+ return DT_CHR; -+ if (S_ISBLK(obj->yst_mode)) -+ return DT_BLK; -+ if (S_ISSOCK(obj->yst_mode)) -+ return DT_SOCK; -+ default: -+ return DT_REG; -+ break; -+ } -+} -+ -+YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj) -+{ -+ obj = yaffs_GetEquivalentObject(obj); -+ if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) { -+ return yaffs_CloneString(obj->variant.symLinkVariant.alias); -+ } else { -+ return yaffs_CloneString(_Y("")); -+ } -+} -+ -+#ifndef CONFIG_YAFFS_WINCE -+ -+int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr) -+{ -+ unsigned int valid = attr->ia_valid; -+ -+ if (valid & ATTR_MODE) -+ obj->yst_mode = attr->ia_mode; -+ if (valid & ATTR_UID) -+ obj->yst_uid = attr->ia_uid; -+ if (valid & ATTR_GID) -+ obj->yst_gid = attr->ia_gid; -+ -+ if (valid & ATTR_ATIME) -+ obj->yst_atime = Y_TIME_CONVERT(attr->ia_atime); -+ if (valid & ATTR_CTIME) -+ obj->yst_ctime = Y_TIME_CONVERT(attr->ia_ctime); -+ if (valid & ATTR_MTIME) -+ obj->yst_mtime = Y_TIME_CONVERT(attr->ia_mtime); -+ -+ if (valid & ATTR_SIZE) -+ yaffs_ResizeFile(obj, attr->ia_size); -+ -+ yaffs_UpdateObjectHeader(obj, NULL, 1, 0, 0); -+ -+ return YAFFS_OK; -+ -+} -+int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr) -+{ -+ unsigned int valid = 0; -+ -+ attr->ia_mode = obj->yst_mode; -+ valid |= ATTR_MODE; -+ attr->ia_uid = obj->yst_uid; -+ valid |= ATTR_UID; -+ attr->ia_gid = obj->yst_gid; -+ valid |= ATTR_GID; -+ -+ Y_TIME_CONVERT(attr->ia_atime) = obj->yst_atime; -+ valid |= ATTR_ATIME; -+ Y_TIME_CONVERT(attr->ia_ctime) = obj->yst_ctime; -+ valid |= ATTR_CTIME; -+ Y_TIME_CONVERT(attr->ia_mtime) = obj->yst_mtime; -+ valid |= ATTR_MTIME; -+ -+ attr->ia_size = yaffs_GetFileSize(obj); -+ valid |= ATTR_SIZE; -+ -+ attr->ia_valid = valid; -+ -+ return YAFFS_OK; -+ -+} -+ -+#endif -+ -+#if 0 -+int yaffs_DumpObject(yaffs_Object * obj) -+{ -+ YCHAR name[257]; -+ -+ yaffs_GetObjectName(obj, name, 256); -+ -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("Object %d, inode %d \"%s\"\n dirty %d valid %d serial %d sum %d" -+ " chunk %d type %d size %d\n" -+ TENDSTR), obj->objectId, yaffs_GetObjectInode(obj), name, -+ obj->dirty, obj->valid, obj->serial, obj->sum, obj->chunkId, -+ yaffs_GetObjectType(obj), yaffs_GetObjectFileLength(obj))); -+ -+ return YAFFS_OK; -+} -+#endif -+ -+/*---------------------------- Initialisation code -------------------------------------- */ -+ -+static int yaffs_CheckDevFunctions(const yaffs_Device * dev) -+{ -+ -+ /* Common functions, gotta have */ -+ if (!dev->eraseBlockInNAND || !dev->initialiseNAND) -+ return 0; -+ -+#ifdef CONFIG_YAFFS_YAFFS2 -+ -+ /* Can use the "with tags" style interface for yaffs1 or yaffs2 */ -+ if (dev->writeChunkWithTagsToNAND && -+ dev->readChunkWithTagsFromNAND && -+ !dev->writeChunkToNAND && -+ !dev->readChunkFromNAND && -+ dev->markNANDBlockBad && dev->queryNANDBlock) -+ return 1; -+#endif -+ -+ /* Can use the "spare" style interface for yaffs1 */ -+ if (!dev->isYaffs2 && -+ !dev->writeChunkWithTagsToNAND && -+ !dev->readChunkWithTagsFromNAND && -+ dev->writeChunkToNAND && -+ dev->readChunkFromNAND && -+ !dev->markNANDBlockBad && !dev->queryNANDBlock) -+ return 1; -+ -+ return 0; /* bad */ -+} -+ -+ -+static void yaffs_CreateInitialDirectories(yaffs_Device *dev) -+{ -+ /* Initialise the unlinked, deleted, root and lost and found directories */ -+ -+ dev->lostNFoundDir = dev->rootDir = NULL; -+ dev->unlinkedDir = dev->deletedDir = NULL; -+ -+ dev->unlinkedDir = -+ yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_UNLINKED, S_IFDIR); -+ dev->deletedDir = -+ yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_DELETED, S_IFDIR); -+ -+ dev->rootDir = -+ yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_ROOT, -+ YAFFS_ROOT_MODE | S_IFDIR); -+ dev->lostNFoundDir = -+ yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_LOSTNFOUND, -+ YAFFS_LOSTNFOUND_MODE | S_IFDIR); -+ yaffs_AddObjectToDirectory(dev->rootDir, dev->lostNFoundDir); -+} -+ -+int yaffs_GutsInitialise(yaffs_Device * dev) -+{ -+ unsigned x; -+ int bits; -+ -+ T(YAFFS_TRACE_TRACING, (TSTR("yaffs: yaffs_GutsInitialise()" TENDSTR))); -+ -+ /* Check stuff that must be set */ -+ -+ if (!dev) { -+ T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Need a device" TENDSTR))); -+ return YAFFS_FAIL; -+ } -+ -+ dev->internalStartBlock = dev->startBlock; -+ dev->internalEndBlock = dev->endBlock; -+ dev->blockOffset = 0; -+ dev->chunkOffset = 0; -+ dev->nFreeChunks = 0; -+ -+ if (dev->startBlock == 0) { -+ dev->internalStartBlock = dev->startBlock + 1; -+ dev->internalEndBlock = dev->endBlock + 1; -+ dev->blockOffset = 1; -+ dev->chunkOffset = dev->nChunksPerBlock; -+ } -+ -+ /* Check geometry parameters. */ -+ -+ if ((dev->isYaffs2 && dev->nDataBytesPerChunk < 1024) || -+ (!dev->isYaffs2 && dev->nDataBytesPerChunk != 512) || -+ dev->nChunksPerBlock < 2 || -+ dev->nReservedBlocks < 2 || -+ dev->internalStartBlock <= 0 || -+ dev->internalEndBlock <= 0 || -+ dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2) // otherwise it is too small -+ ) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s " -+ TENDSTR), dev->nDataBytesPerChunk, dev->isYaffs2 ? "2" : "")); -+ return YAFFS_FAIL; -+ } -+ -+ if (yaffs_InitialiseNAND(dev) != YAFFS_OK) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("yaffs: InitialiseNAND failed" TENDSTR))); -+ return YAFFS_FAIL; -+ } -+ -+ /* Got the right mix of functions? */ -+ if (!yaffs_CheckDevFunctions(dev)) { -+ /* Function missing */ -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR -+ ("yaffs: device function(s) missing or wrong\n" TENDSTR))); -+ -+ return YAFFS_FAIL; -+ } -+ -+ /* This is really a compilation check. */ -+ if (!yaffs_CheckStructures()) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("yaffs_CheckStructures failed\n" TENDSTR))); -+ return YAFFS_FAIL; -+ } -+ -+ if (dev->isMounted) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("yaffs: device already mounted\n" TENDSTR))); -+ return YAFFS_FAIL; -+ } -+ -+ /* Finished with most checks. One or two more checks happen later on too. */ -+ -+ dev->isMounted = 1; -+ -+ -+ -+ /* OK now calculate a few things for the device */ -+ -+ /* -+ * Calculate all the chunk size manipulation numbers: -+ */ -+ /* Start off assuming it is a power of 2 */ -+ dev->chunkShift = ShiftDiv(dev->nDataBytesPerChunk); -+ dev->chunkMask = (1<chunkShift) - 1; -+ -+ if(dev->nDataBytesPerChunk == (dev->chunkMask + 1)){ -+ /* Yes it is a power of 2, disable crumbs */ -+ dev->crumbMask = 0; -+ dev->crumbShift = 0; -+ dev->crumbsPerChunk = 0; -+ } else { -+ /* Not a power of 2, use crumbs instead */ -+ dev->crumbShift = ShiftDiv(sizeof(yaffs_PackedTags2TagsPart)); -+ dev->crumbMask = (1<crumbShift)-1; -+ dev->crumbsPerChunk = dev->nDataBytesPerChunk/(1 << dev->crumbShift); -+ dev->chunkShift = 0; -+ dev->chunkMask = 0; -+ } -+ -+ -+ /* -+ * Calculate chunkGroupBits. -+ * We need to find the next power of 2 > than internalEndBlock -+ */ -+ -+ x = dev->nChunksPerBlock * (dev->internalEndBlock + 1); -+ -+ bits = ShiftsGE(x); -+ -+ /* Set up tnode width if wide tnodes are enabled. */ -+ if(!dev->wideTnodesDisabled){ -+ /* bits must be even so that we end up with 32-bit words */ -+ if(bits & 1) -+ bits++; -+ if(bits < 16) -+ dev->tnodeWidth = 16; -+ else -+ dev->tnodeWidth = bits; -+ } -+ else -+ dev->tnodeWidth = 16; -+ -+ dev->tnodeMask = (1<tnodeWidth)-1; -+ -+ /* Level0 Tnodes are 16 bits or wider (if wide tnodes are enabled), -+ * so if the bitwidth of the -+ * chunk range we're using is greater than 16 we need -+ * to figure out chunk shift and chunkGroupSize -+ */ -+ -+ if (bits <= dev->tnodeWidth) -+ dev->chunkGroupBits = 0; -+ else -+ dev->chunkGroupBits = bits - dev->tnodeWidth; -+ -+ -+ dev->chunkGroupSize = 1 << dev->chunkGroupBits; -+ -+ if (dev->nChunksPerBlock < dev->chunkGroupSize) { -+ /* We have a problem because the soft delete won't work if -+ * the chunk group size > chunks per block. -+ * This can be remedied by using larger "virtual blocks". -+ */ -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("yaffs: chunk group too large\n" TENDSTR))); -+ -+ return YAFFS_FAIL; -+ } -+ -+ /* OK, we've finished verifying the device, lets continue with initialisation */ -+ -+ /* More device initialisation */ -+ dev->garbageCollections = 0; -+ dev->passiveGarbageCollections = 0; -+ dev->currentDirtyChecker = 0; -+ dev->bufferedBlock = -1; -+ dev->doingBufferedBlockRewrite = 0; -+ dev->nDeletedFiles = 0; -+ dev->nBackgroundDeletions = 0; -+ dev->nUnlinkedFiles = 0; -+ dev->eccFixed = 0; -+ dev->eccUnfixed = 0; -+ dev->tagsEccFixed = 0; -+ dev->tagsEccUnfixed = 0; -+ dev->nErasureFailures = 0; -+ dev->nErasedBlocks = 0; -+ dev->isDoingGC = 0; -+ dev->hasPendingPrioritisedGCs = 1; /* Assume the worst for now, will get fixed on first GC */ -+ -+ /* Initialise temporary buffers and caches. */ -+ { -+ int i; -+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) { -+ dev->tempBuffer[i].line = 0; /* not in use */ -+ dev->tempBuffer[i].buffer = -+ YMALLOC_DMA(dev->nDataBytesPerChunk); -+ } -+ } -+ -+ if (dev->nShortOpCaches > 0) { -+ int i; -+ -+ if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES) { -+ dev->nShortOpCaches = YAFFS_MAX_SHORT_OP_CACHES; -+ } -+ -+ dev->srCache = -+ YMALLOC(dev->nShortOpCaches * sizeof(yaffs_ChunkCache)); -+ -+ for (i = 0; i < dev->nShortOpCaches; i++) { -+ dev->srCache[i].object = NULL; -+ dev->srCache[i].lastUse = 0; -+ dev->srCache[i].dirty = 0; -+ dev->srCache[i].data = YMALLOC_DMA(dev->nDataBytesPerChunk); -+ } -+ dev->srLastUse = 0; -+ } -+ -+ dev->cacheHits = 0; -+ -+ dev->gcCleanupList = YMALLOC(dev->nChunksPerBlock * sizeof(__u32)); -+ -+ if (dev->isYaffs2) { -+ dev->useHeaderFileSize = 1; -+ } -+ -+ yaffs_InitialiseBlocks(dev); -+ yaffs_InitialiseTnodes(dev); -+ yaffs_InitialiseObjects(dev); -+ -+ yaffs_CreateInitialDirectories(dev); -+ -+ -+ /* Now scan the flash. */ -+ if (dev->isYaffs2) { -+ if(yaffs_CheckpointRestore(dev)) { -+ T(YAFFS_TRACE_CHECKPOINT, -+ (TSTR("yaffs: restored from checkpoint" TENDSTR))); -+ } else { -+ -+ /* Clean up the mess caused by an aborted checkpoint load -+ * and scan backwards. -+ */ -+ yaffs_DeinitialiseBlocks(dev); -+ yaffs_DeinitialiseTnodes(dev); -+ yaffs_DeinitialiseObjects(dev); -+ yaffs_InitialiseBlocks(dev); -+ yaffs_InitialiseTnodes(dev); -+ yaffs_InitialiseObjects(dev); -+ yaffs_CreateInitialDirectories(dev); -+ -+ yaffs_ScanBackwards(dev); -+ } -+ }else -+ yaffs_Scan(dev); -+ -+ /* Zero out stats */ -+ dev->nPageReads = 0; -+ dev->nPageWrites = 0; -+ dev->nBlockErasures = 0; -+ dev->nGCCopies = 0; -+ dev->nRetriedWrites = 0; -+ -+ dev->nRetiredBlocks = 0; -+ -+ yaffs_VerifyFreeChunks(dev); -+ -+ T(YAFFS_TRACE_TRACING, -+ (TSTR("yaffs: yaffs_GutsInitialise() done.\n" TENDSTR))); -+ return YAFFS_OK; -+ -+} -+ -+void yaffs_Deinitialise(yaffs_Device * dev) -+{ -+ if (dev->isMounted) { -+ int i; -+ -+ yaffs_DeinitialiseBlocks(dev); -+ yaffs_DeinitialiseTnodes(dev); -+ yaffs_DeinitialiseObjects(dev); -+ if (dev->nShortOpCaches > 0) { -+ -+ for (i = 0; i < dev->nShortOpCaches; i++) { -+ YFREE(dev->srCache[i].data); -+ } -+ -+ YFREE(dev->srCache); -+ } -+ -+ YFREE(dev->gcCleanupList); -+ -+ for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) { -+ YFREE(dev->tempBuffer[i].buffer); -+ } -+ -+ dev->isMounted = 0; -+ } -+ -+} -+ -+static int yaffs_CountFreeChunks(yaffs_Device * dev) -+{ -+ int nFree; -+ int b; -+ -+ yaffs_BlockInfo *blk; -+ -+ for (nFree = 0, b = dev->internalStartBlock; b <= dev->internalEndBlock; -+ b++) { -+ blk = yaffs_GetBlockInfo(dev, b); -+ -+ switch (blk->blockState) { -+ case YAFFS_BLOCK_STATE_EMPTY: -+ case YAFFS_BLOCK_STATE_ALLOCATING: -+ case YAFFS_BLOCK_STATE_COLLECTING: -+ case YAFFS_BLOCK_STATE_FULL: -+ nFree += -+ (dev->nChunksPerBlock - blk->pagesInUse + -+ blk->softDeletions); -+ break; -+ default: -+ break; -+ } -+ -+ } -+ -+ return nFree; -+} -+ -+int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev) -+{ -+ /* This is what we report to the outside world */ -+ -+ int nFree; -+ int nDirtyCacheChunks; -+ int blocksForCheckpoint; -+ -+#if 1 -+ nFree = dev->nFreeChunks; -+#else -+ nFree = yaffs_CountFreeChunks(dev); -+#endif -+ -+ nFree += dev->nDeletedFiles; -+ -+ /* Now count the number of dirty chunks in the cache and subtract those */ -+ -+ { -+ int i; -+ for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) { -+ if (dev->srCache[i].dirty) -+ nDirtyCacheChunks++; -+ } -+ } -+ -+ nFree -= nDirtyCacheChunks; -+ -+ nFree -= ((dev->nReservedBlocks + 1) * dev->nChunksPerBlock); -+ -+ /* Now we figure out how much to reserve for the checkpoint and report that... */ -+ blocksForCheckpoint = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint; -+ if(blocksForCheckpoint < 0) -+ blocksForCheckpoint = 0; -+ -+ nFree -= (blocksForCheckpoint * dev->nChunksPerBlock); -+ -+ if (nFree < 0) -+ nFree = 0; -+ -+ return nFree; -+ -+} -+ -+static int yaffs_freeVerificationFailures; -+ -+static void yaffs_VerifyFreeChunks(yaffs_Device * dev) -+{ -+ int counted = yaffs_CountFreeChunks(dev); -+ -+ int difference = dev->nFreeChunks - counted; -+ -+ if (difference) { -+ T(YAFFS_TRACE_ALWAYS, -+ (TSTR("Freechunks verification failure %d %d %d" TENDSTR), -+ dev->nFreeChunks, counted, difference)); -+ yaffs_freeVerificationFailures++; -+ } -+} -+ -+/*---------------------------------------- YAFFS test code ----------------------*/ -+ -+#define yaffs_CheckStruct(structure,syze, name) \ -+ if(sizeof(structure) != syze) \ -+ { \ -+ T(YAFFS_TRACE_ALWAYS,(TSTR("%s should be %d but is %d\n" TENDSTR),\ -+ name,syze,sizeof(structure))); \ -+ return YAFFS_FAIL; \ -+ } -+ -+static int yaffs_CheckStructures(void) -+{ -+/* yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags") */ -+/* yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion") */ -+/* yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare") */ -+#ifndef CONFIG_YAFFS_TNODE_LIST_DEBUG -+ yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode") -+#endif -+ yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader") -+ -+ return YAFFS_OK; -+} -diff -urN linux.old/fs/yaffs2/yaffs_guts.h linux.dev/fs/yaffs2/yaffs_guts.h ---- linux.old/fs/yaffs2/yaffs_guts.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_guts.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,893 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffs_guts.h: Configuration etc for yaffs_guts -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU Lesser General Public License version 2.1 as -+ * published by the Free Software Foundation. -+ * -+ * -+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL. -+ * -+ * $Id: yaffs_guts.h,v 1.25 2006/10/13 08:52:49 charles Exp $ -+ */ -+ -+#ifndef __YAFFS_GUTS_H__ -+#define __YAFFS_GUTS_H__ -+ -+#include "devextras.h" -+#include "yportenv.h" -+ -+#define YAFFS_OK 1 -+#define YAFFS_FAIL 0 -+ -+/* Give us a Y=0x59, -+ * Give us an A=0x41, -+ * Give us an FF=0xFF -+ * Give us an S=0x53 -+ * And what have we got... -+ */ -+#define YAFFS_MAGIC 0x5941FF53 -+ -+#define YAFFS_NTNODES_LEVEL0 16 -+#define YAFFS_TNODES_LEVEL0_BITS 4 -+#define YAFFS_TNODES_LEVEL0_MASK 0xf -+ -+#define YAFFS_NTNODES_INTERNAL (YAFFS_NTNODES_LEVEL0 / 2) -+#define YAFFS_TNODES_INTERNAL_BITS (YAFFS_TNODES_LEVEL0_BITS - 1) -+#define YAFFS_TNODES_INTERNAL_MASK 0x7 -+#define YAFFS_TNODES_MAX_LEVEL 6 -+ -+#ifndef CONFIG_YAFFS_NO_YAFFS1 -+#define YAFFS_BYTES_PER_SPARE 16 -+#define YAFFS_BYTES_PER_CHUNK 512 -+#define YAFFS_CHUNK_SIZE_SHIFT 9 -+#define YAFFS_CHUNKS_PER_BLOCK 32 -+#define YAFFS_BYTES_PER_BLOCK (YAFFS_CHUNKS_PER_BLOCK*YAFFS_BYTES_PER_CHUNK) -+#endif -+ -+#define YAFFS_MIN_YAFFS2_CHUNK_SIZE 1024 -+#define YAFFS_MIN_YAFFS2_SPARE_SIZE 32 -+ -+#define YAFFS_MAX_CHUNK_ID 0x000FFFFF -+ -+#define YAFFS_UNUSED_OBJECT_ID 0x0003FFFF -+ -+#define YAFFS_ALLOCATION_NOBJECTS 100 -+#define YAFFS_ALLOCATION_NTNODES 100 -+#define YAFFS_ALLOCATION_NLINKS 100 -+ -+#define YAFFS_NOBJECT_BUCKETS 256 -+ -+ -+#define YAFFS_OBJECT_SPACE 0x40000 -+ -+#define YAFFS_NCHECKPOINT_OBJECTS 5000 -+ -+#define YAFFS_CHECKPOINT_VERSION 2 -+ -+#ifdef CONFIG_YAFFS_UNICODE -+#define YAFFS_MAX_NAME_LENGTH 127 -+#define YAFFS_MAX_ALIAS_LENGTH 79 -+#else -+#define YAFFS_MAX_NAME_LENGTH 255 -+#define YAFFS_MAX_ALIAS_LENGTH 159 -+#endif -+ -+#define YAFFS_SHORT_NAME_LENGTH 15 -+ -+/* Some special object ids for pseudo objects */ -+#define YAFFS_OBJECTID_ROOT 1 -+#define YAFFS_OBJECTID_LOSTNFOUND 2 -+#define YAFFS_OBJECTID_UNLINKED 3 -+#define YAFFS_OBJECTID_DELETED 4 -+ -+/* Sseudo object ids for checkpointing */ -+#define YAFFS_OBJECTID_SB_HEADER 0x10 -+#define YAFFS_OBJECTID_CHECKPOINT_DATA 0x20 -+#define YAFFS_SEQUENCE_CHECKPOINT_DATA 0x21 -+ -+/* */ -+ -+#define YAFFS_MAX_SHORT_OP_CACHES 20 -+ -+#define YAFFS_N_TEMP_BUFFERS 4 -+ -+/* Sequence numbers are used in YAFFS2 to determine block allocation order. -+ * The range is limited slightly to help distinguish bad numbers from good. -+ * This also allows us to perhaps in the future use special numbers for -+ * special purposes. -+ * EFFFFF00 allows the allocation of 8 blocks per second (~1Mbytes) for 15 years, -+ * and is a larger number than the lifetime of a 2GB device. -+ */ -+#define YAFFS_LOWEST_SEQUENCE_NUMBER 0x00001000 -+#define YAFFS_HIGHEST_SEQUENCE_NUMBER 0xEFFFFF00 -+ -+/* ChunkCache is used for short read/write operations.*/ -+typedef struct { -+ struct yaffs_ObjectStruct *object; -+ int chunkId; -+ int lastUse; -+ int dirty; -+ int nBytes; /* Only valid if the cache is dirty */ -+ int locked; /* Can't push out or flush while locked. */ -+#ifdef CONFIG_YAFFS_YAFFS2 -+ __u8 *data; -+#else -+ __u8 data[YAFFS_BYTES_PER_CHUNK]; -+#endif -+} yaffs_ChunkCache; -+ -+ -+ -+/* Tags structures in RAM -+ * NB This uses bitfield. Bitfields should not straddle a u32 boundary otherwise -+ * the structure size will get blown out. -+ */ -+ -+#ifndef CONFIG_YAFFS_NO_YAFFS1 -+typedef struct { -+ unsigned chunkId:20; -+ unsigned serialNumber:2; -+ unsigned byteCount:10; -+ unsigned objectId:18; -+ unsigned ecc:12; -+ unsigned unusedStuff:2; -+ -+} yaffs_Tags; -+ -+typedef union { -+ yaffs_Tags asTags; -+ __u8 asBytes[8]; -+} yaffs_TagsUnion; -+ -+#endif -+ -+/* Stuff used for extended tags in YAFFS2 */ -+ -+typedef enum { -+ YAFFS_ECC_RESULT_UNKNOWN, -+ YAFFS_ECC_RESULT_NO_ERROR, -+ YAFFS_ECC_RESULT_FIXED, -+ YAFFS_ECC_RESULT_UNFIXED -+} yaffs_ECCResult; -+ -+typedef enum { -+ YAFFS_OBJECT_TYPE_UNKNOWN, -+ YAFFS_OBJECT_TYPE_FILE, -+ YAFFS_OBJECT_TYPE_SYMLINK, -+ YAFFS_OBJECT_TYPE_DIRECTORY, -+ YAFFS_OBJECT_TYPE_HARDLINK, -+ YAFFS_OBJECT_TYPE_SPECIAL -+} yaffs_ObjectType; -+ -+typedef struct { -+ -+ unsigned validMarker0; -+ unsigned chunkUsed; /* Status of the chunk: used or unused */ -+ unsigned objectId; /* If 0 then this is not part of an object (unused) */ -+ unsigned chunkId; /* If 0 then this is a header, else a data chunk */ -+ unsigned byteCount; /* Only valid for data chunks */ -+ -+ /* The following stuff only has meaning when we read */ -+ yaffs_ECCResult eccResult; -+ unsigned blockBad; -+ -+ /* YAFFS 1 stuff */ -+ unsigned chunkDeleted; /* The chunk is marked deleted */ -+ unsigned serialNumber; /* Yaffs1 2-bit serial number */ -+ -+ /* YAFFS2 stuff */ -+ unsigned sequenceNumber; /* The sequence number of this block */ -+ -+ /* Extra info if this is an object header (YAFFS2 only) */ -+ -+ unsigned extraHeaderInfoAvailable; /* There is extra info available if this is not zero */ -+ unsigned extraParentObjectId; /* The parent object */ -+ unsigned extraIsShrinkHeader; /* Is it a shrink header? */ -+ unsigned extraShadows; /* Does this shadow another object? */ -+ -+ yaffs_ObjectType extraObjectType; /* What object type? */ -+ -+ unsigned extraFileLength; /* Length if it is a file */ -+ unsigned extraEquivalentObjectId; /* Equivalent object Id if it is a hard link */ -+ -+ unsigned validMarker1; -+ -+} yaffs_ExtendedTags; -+ -+/* Spare structure for YAFFS1 */ -+typedef struct { -+ __u8 tagByte0; -+ __u8 tagByte1; -+ __u8 tagByte2; -+ __u8 tagByte3; -+ __u8 pageStatus; /* set to 0 to delete the chunk */ -+ __u8 blockStatus; -+ __u8 tagByte4; -+ __u8 tagByte5; -+ __u8 ecc1[3]; -+ __u8 tagByte6; -+ __u8 tagByte7; -+ __u8 ecc2[3]; -+} yaffs_Spare; -+ -+/*Special structure for passing through to mtd */ -+struct yaffs_NANDSpare { -+ yaffs_Spare spare; -+ int eccres1; -+ int eccres2; -+}; -+ -+/* Block data in RAM */ -+ -+typedef enum { -+ YAFFS_BLOCK_STATE_UNKNOWN = 0, -+ -+ YAFFS_BLOCK_STATE_SCANNING, -+ YAFFS_BLOCK_STATE_NEEDS_SCANNING, -+ /* The block might have something on it (ie it is allocating or full, perhaps empty) -+ * but it needs to be scanned to determine its true state. -+ * This state is only valid during yaffs_Scan. -+ * NB We tolerate empty because the pre-scanner might be incapable of deciding -+ * However, if this state is returned on a YAFFS2 device, then we expect a sequence number -+ */ -+ -+ YAFFS_BLOCK_STATE_EMPTY, -+ /* This block is empty */ -+ -+ YAFFS_BLOCK_STATE_ALLOCATING, -+ /* This block is partially allocated. -+ * At least one page holds valid data. -+ * This is the one currently being used for page -+ * allocation. Should never be more than one of these -+ */ -+ -+ YAFFS_BLOCK_STATE_FULL, -+ /* All the pages in this block have been allocated. -+ */ -+ -+ YAFFS_BLOCK_STATE_DIRTY, -+ /* All pages have been allocated and deleted. -+ * Erase me, reuse me. -+ */ -+ -+ YAFFS_BLOCK_STATE_CHECKPOINT, -+ /* This block is assigned to holding checkpoint data. -+ */ -+ -+ YAFFS_BLOCK_STATE_COLLECTING, -+ /* This block is being garbage collected */ -+ -+ YAFFS_BLOCK_STATE_DEAD -+ /* This block has failed and is not in use */ -+} yaffs_BlockState; -+ -+typedef struct { -+ -+ int softDeletions:10; /* number of soft deleted pages */ -+ int pagesInUse:10; /* number of pages in use */ -+ yaffs_BlockState blockState:4; /* One of the above block states */ -+ __u32 needsRetiring:1; /* Data has failed on this block, need to get valid data off */ -+ /* and retire the block. */ -+ __u32 skipErasedCheck: 1; /* If this is set we can skip the erased check on this block */ -+ __u32 gcPrioritise: 1; /* An ECC check or bank check has failed on this block. -+ It should be prioritised for GC */ -+ __u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */ -+ -+#ifdef CONFIG_YAFFS_YAFFS2 -+ __u32 hasShrinkHeader:1; /* This block has at least one shrink object header */ -+ __u32 sequenceNumber; /* block sequence number for yaffs2 */ -+#endif -+ -+} yaffs_BlockInfo; -+ -+/* -------------------------- Object structure -------------------------------*/ -+/* This is the object structure as stored on NAND */ -+ -+typedef struct { -+ yaffs_ObjectType type; -+ -+ /* Apply to everything */ -+ int parentObjectId; -+ __u16 sum__NoLongerUsed; /* checksum of name. No longer used */ -+ YCHAR name[YAFFS_MAX_NAME_LENGTH + 1]; -+ -+ /* Thes following apply to directories, files, symlinks - not hard links */ -+ __u32 yst_mode; /* protection */ -+ -+#ifdef CONFIG_YAFFS_WINCE -+ __u32 notForWinCE[5]; -+#else -+ __u32 yst_uid; -+ __u32 yst_gid; -+ __u32 yst_atime; -+ __u32 yst_mtime; -+ __u32 yst_ctime; -+#endif -+ -+ /* File size applies to files only */ -+ int fileSize; -+ -+ /* Equivalent object id applies to hard links only. */ -+ int equivalentObjectId; -+ -+ /* Alias is for symlinks only. */ -+ YCHAR alias[YAFFS_MAX_ALIAS_LENGTH + 1]; -+ -+ __u32 yst_rdev; /* device stuff for block and char devices (major/min) */ -+ -+#ifdef CONFIG_YAFFS_WINCE -+ __u32 win_ctime[2]; -+ __u32 win_atime[2]; -+ __u32 win_mtime[2]; -+ __u32 roomToGrow[4]; -+#else -+ __u32 roomToGrow[10]; -+#endif -+ -+ int shadowsObject; /* This object header shadows the specified object if > 0 */ -+ -+ /* isShrink applies to object headers written when we shrink the file (ie resize) */ -+ __u32 isShrink; -+ -+} yaffs_ObjectHeader; -+ -+/*--------------------------- Tnode -------------------------- */ -+ -+union yaffs_Tnode_union { -+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG -+ union yaffs_Tnode_union *internal[YAFFS_NTNODES_INTERNAL + 1]; -+#else -+ union yaffs_Tnode_union *internal[YAFFS_NTNODES_INTERNAL]; -+#endif -+/* __u16 level0[YAFFS_NTNODES_LEVEL0]; */ -+ -+}; -+ -+typedef union yaffs_Tnode_union yaffs_Tnode; -+ -+struct yaffs_TnodeList_struct { -+ struct yaffs_TnodeList_struct *next; -+ yaffs_Tnode *tnodes; -+}; -+ -+typedef struct yaffs_TnodeList_struct yaffs_TnodeList; -+ -+/*------------------------ Object -----------------------------*/ -+/* An object can be one of: -+ * - a directory (no data, has children links -+ * - a regular file (data.... not prunes :->). -+ * - a symlink [symbolic link] (the alias). -+ * - a hard link -+ */ -+ -+typedef struct { -+ __u32 fileSize; -+ __u32 scannedFileSize; -+ __u32 shrinkSize; -+ int topLevel; -+ yaffs_Tnode *top; -+} yaffs_FileStructure; -+ -+typedef struct { -+ struct list_head children; /* list of child links */ -+} yaffs_DirectoryStructure; -+ -+typedef struct { -+ YCHAR *alias; -+} yaffs_SymLinkStructure; -+ -+typedef struct { -+ struct yaffs_ObjectStruct *equivalentObject; -+ __u32 equivalentObjectId; -+} yaffs_HardLinkStructure; -+ -+typedef union { -+ yaffs_FileStructure fileVariant; -+ yaffs_DirectoryStructure directoryVariant; -+ yaffs_SymLinkStructure symLinkVariant; -+ yaffs_HardLinkStructure hardLinkVariant; -+} yaffs_ObjectVariant; -+ -+struct yaffs_ObjectStruct { -+ __u8 deleted:1; /* This should only apply to unlinked files. */ -+ __u8 softDeleted:1; /* it has also been soft deleted */ -+ __u8 unlinked:1; /* An unlinked file. The file should be in the unlinked directory.*/ -+ __u8 fake:1; /* A fake object has no presence on NAND. */ -+ __u8 renameAllowed:1; /* Some objects are not allowed to be renamed. */ -+ __u8 unlinkAllowed:1; -+ __u8 dirty:1; /* the object needs to be written to flash */ -+ __u8 valid:1; /* When the file system is being loaded up, this -+ * object might be created before the data -+ * is available (ie. file data records appear before the header). -+ */ -+ __u8 lazyLoaded:1; /* This object has been lazy loaded and is missing some detail */ -+ -+ __u8 deferedFree:1; /* For Linux kernel. Object is removed from NAND, but is -+ * still in the inode cache. Free of object is defered. -+ * until the inode is released. -+ */ -+ -+ __u8 serial; /* serial number of chunk in NAND. Cached here */ -+ __u16 sum; /* sum of the name to speed searching */ -+ -+ struct yaffs_DeviceStruct *myDev; /* The device I'm on */ -+ -+ struct list_head hashLink; /* list of objects in this hash bucket */ -+ -+ struct list_head hardLinks; /* all the equivalent hard linked objects */ -+ -+ /* directory structure stuff */ -+ /* also used for linking up the free list */ -+ struct yaffs_ObjectStruct *parent; -+ struct list_head siblings; -+ -+ /* Where's my object header in NAND? */ -+ int chunkId; -+ -+ int nDataChunks; /* Number of data chunks attached to the file. */ -+ -+ __u32 objectId; /* the object id value */ -+ -+ __u32 yst_mode; -+ -+#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM -+ YCHAR shortName[YAFFS_SHORT_NAME_LENGTH + 1]; -+#endif -+ -+#ifndef __KERNEL__ -+ __u32 inUse; -+#endif -+ -+#ifdef CONFIG_YAFFS_WINCE -+ __u32 win_ctime[2]; -+ __u32 win_mtime[2]; -+ __u32 win_atime[2]; -+#else -+ __u32 yst_uid; -+ __u32 yst_gid; -+ __u32 yst_atime; -+ __u32 yst_mtime; -+ __u32 yst_ctime; -+#endif -+ -+ __u32 yst_rdev; -+ -+#ifdef __KERNEL__ -+ struct inode *myInode; -+ -+#endif -+ -+ yaffs_ObjectType variantType; -+ -+ yaffs_ObjectVariant variant; -+ -+}; -+ -+typedef struct yaffs_ObjectStruct yaffs_Object; -+ -+struct yaffs_ObjectList_struct { -+ yaffs_Object *objects; -+ struct yaffs_ObjectList_struct *next; -+}; -+ -+typedef struct yaffs_ObjectList_struct yaffs_ObjectList; -+ -+typedef struct { -+ struct list_head list; -+ int count; -+} yaffs_ObjectBucket; -+ -+ -+/* yaffs_CheckpointObject holds the definition of an object as dumped -+ * by checkpointing. -+ */ -+ -+typedef struct { -+ int structType; -+ __u32 objectId; -+ __u32 parentId; -+ int chunkId; -+ -+ yaffs_ObjectType variantType:3; -+ __u8 deleted:1; -+ __u8 softDeleted:1; -+ __u8 unlinked:1; -+ __u8 fake:1; -+ __u8 renameAllowed:1; -+ __u8 unlinkAllowed:1; -+ __u8 serial; -+ -+ int nDataChunks; -+ __u32 fileSizeOrEquivalentObjectId; -+ -+}yaffs_CheckpointObject; -+ -+/*--------------------- Temporary buffers ---------------- -+ * -+ * These are chunk-sized working buffers. Each device has a few -+ */ -+ -+typedef struct { -+ __u8 *buffer; -+ int line; /* track from whence this buffer was allocated */ -+ int maxLine; -+} yaffs_TempBuffer; -+ -+/*----------------- Device ---------------------------------*/ -+ -+struct yaffs_DeviceStruct { -+ struct list_head devList; -+ const char *name; -+ -+ /* Entry parameters set up way early. Yaffs sets up the rest.*/ -+ int nDataBytesPerChunk; /* Should be a power of 2 >= 512 */ -+ int nChunksPerBlock; /* does not need to be a power of 2 */ -+ int nBytesPerSpare; /* spare area size */ -+ int startBlock; /* Start block we're allowed to use */ -+ int endBlock; /* End block we're allowed to use */ -+ int nReservedBlocks; /* We want this tuneable so that we can reduce */ -+ /* reserved blocks on NOR and RAM. */ -+ -+ /* Stuff used by the partitioned checkpointing mechanism */ -+ int checkpointStartBlock; -+ int checkpointEndBlock; -+ -+ /* Stuff used by the shared space checkpointing mechanism */ -+ /* If this value is zero, then this mechanism is disabled */ -+ -+ int nCheckpointReservedBlocks; /* Blocks to reserve for checkpoint data */ -+ -+ -+ -+ -+ int nShortOpCaches; /* If <= 0, then short op caching is disabled, else -+ * the number of short op caches (don't use too many) -+ */ -+ -+ int useHeaderFileSize; /* Flag to determine if we should use file sizes from the header */ -+ -+ int useNANDECC; /* Flag to decide whether or not to use NANDECC */ -+ -+ void *genericDevice; /* Pointer to device context -+ * On an mtd this holds the mtd pointer. -+ */ -+ void *superBlock; -+ -+ /* NAND access functions (Must be set before calling YAFFS)*/ -+ -+ int (*writeChunkToNAND) (struct yaffs_DeviceStruct * dev, -+ int chunkInNAND, const __u8 * data, -+ const yaffs_Spare * spare); -+ int (*readChunkFromNAND) (struct yaffs_DeviceStruct * dev, -+ int chunkInNAND, __u8 * data, -+ yaffs_Spare * spare); -+ int (*eraseBlockInNAND) (struct yaffs_DeviceStruct * dev, -+ int blockInNAND); -+ int (*initialiseNAND) (struct yaffs_DeviceStruct * dev); -+ -+#ifdef CONFIG_YAFFS_YAFFS2 -+ int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct * dev, -+ int chunkInNAND, const __u8 * data, -+ const yaffs_ExtendedTags * tags); -+ int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct * dev, -+ int chunkInNAND, __u8 * data, -+ yaffs_ExtendedTags * tags); -+ int (*markNANDBlockBad) (struct yaffs_DeviceStruct * dev, int blockNo); -+ int (*queryNANDBlock) (struct yaffs_DeviceStruct * dev, int blockNo, -+ yaffs_BlockState * state, int *sequenceNumber); -+#endif -+ -+ int isYaffs2; -+ -+ /* The removeObjectCallback function must be supplied by OS flavours that -+ * need it. The Linux kernel does not use this, but yaffs direct does use -+ * it to implement the faster readdir -+ */ -+ void (*removeObjectCallback)(struct yaffs_ObjectStruct *obj); -+ -+ /* Callback to mark the superblock dirsty */ -+ void (*markSuperBlockDirty)(void * superblock); -+ -+ int wideTnodesDisabled; /* Set to disable wide tnodes */ -+ -+ -+ /* End of stuff that must be set before initialisation. */ -+ -+ /* Runtime parameters. Set up by YAFFS. */ -+ -+ __u16 chunkGroupBits; /* 0 for devices <= 32MB. else log2(nchunks) - 16 */ -+ __u16 chunkGroupSize; /* == 2^^chunkGroupBits */ -+ -+ /* Stuff to support wide tnodes */ -+ __u32 tnodeWidth; -+ __u32 tnodeMask; -+ -+ /* Stuff to support various file offses to chunk/offset translations */ -+ /* "Crumbs" for nDataBytesPerChunk not being a power of 2 */ -+ __u32 crumbMask; -+ __u32 crumbShift; -+ __u32 crumbsPerChunk; -+ -+ /* Straight shifting for nDataBytesPerChunk being a power of 2 */ -+ __u32 chunkShift; -+ __u32 chunkMask; -+ -+ -+#ifdef __KERNEL__ -+ -+ struct semaphore sem; /* Semaphore for waiting on erasure.*/ -+ struct semaphore grossLock; /* Gross locking semaphore */ -+ __u8 *spareBuffer; /* For mtdif2 use. Don't know the size of the buffer -+ * at compile time so we have to allocate it. -+ */ -+ void (*putSuperFunc) (struct super_block * sb); -+#endif -+ -+ int isMounted; -+ -+ int isCheckpointed; -+ -+ -+ /* Stuff to support block offsetting to support start block zero */ -+ int internalStartBlock; -+ int internalEndBlock; -+ int blockOffset; -+ int chunkOffset; -+ -+ -+ /* Runtime checkpointing stuff */ -+ int checkpointPageSequence; /* running sequence number of checkpoint pages */ -+ int checkpointByteCount; -+ int checkpointByteOffset; -+ __u8 *checkpointBuffer; -+ int checkpointOpenForWrite; -+ int blocksInCheckpoint; -+ int checkpointCurrentChunk; -+ int checkpointCurrentBlock; -+ int checkpointNextBlock; -+ int *checkpointBlockList; -+ int checkpointMaxBlocks; -+ -+ /* Block Info */ -+ yaffs_BlockInfo *blockInfo; -+ __u8 *chunkBits; /* bitmap of chunks in use */ -+ unsigned blockInfoAlt:1; /* was allocated using alternative strategy */ -+ unsigned chunkBitsAlt:1; /* was allocated using alternative strategy */ -+ int chunkBitmapStride; /* Number of bytes of chunkBits per block. -+ * Must be consistent with nChunksPerBlock. -+ */ -+ -+ int nErasedBlocks; -+ int allocationBlock; /* Current block being allocated off */ -+ __u32 allocationPage; -+ int allocationBlockFinder; /* Used to search for next allocation block */ -+ -+ /* Runtime state */ -+ int nTnodesCreated; -+ yaffs_Tnode *freeTnodes; -+ int nFreeTnodes; -+ yaffs_TnodeList *allocatedTnodeList; -+ -+ int isDoingGC; -+ -+ int nObjectsCreated; -+ yaffs_Object *freeObjects; -+ int nFreeObjects; -+ -+ yaffs_ObjectList *allocatedObjectList; -+ -+ yaffs_ObjectBucket objectBucket[YAFFS_NOBJECT_BUCKETS]; -+ -+ int nFreeChunks; -+ -+ int currentDirtyChecker; /* Used to find current dirtiest block */ -+ -+ __u32 *gcCleanupList; /* objects to delete at the end of a GC. */ -+ -+ /* Statistcs */ -+ int nPageWrites; -+ int nPageReads; -+ int nBlockErasures; -+ int nErasureFailures; -+ int nGCCopies; -+ int garbageCollections; -+ int passiveGarbageCollections; -+ int nRetriedWrites; -+ int nRetiredBlocks; -+ int eccFixed; -+ int eccUnfixed; -+ int tagsEccFixed; -+ int tagsEccUnfixed; -+ int nDeletions; -+ int nUnmarkedDeletions; -+ -+ int hasPendingPrioritisedGCs; /* We think this device might have pending prioritised gcs */ -+ -+ /* Special directories */ -+ yaffs_Object *rootDir; -+ yaffs_Object *lostNFoundDir; -+ -+ /* Buffer areas for storing data to recover from write failures TODO -+ * __u8 bufferedData[YAFFS_CHUNKS_PER_BLOCK][YAFFS_BYTES_PER_CHUNK]; -+ * yaffs_Spare bufferedSpare[YAFFS_CHUNKS_PER_BLOCK]; -+ */ -+ -+ int bufferedBlock; /* Which block is buffered here? */ -+ int doingBufferedBlockRewrite; -+ -+ yaffs_ChunkCache *srCache; -+ int srLastUse; -+ -+ int cacheHits; -+ -+ /* Stuff for background deletion and unlinked files.*/ -+ yaffs_Object *unlinkedDir; /* Directory where unlinked and deleted files live. */ -+ yaffs_Object *deletedDir; /* Directory where deleted objects are sent to disappear. */ -+ yaffs_Object *unlinkedDeletion; /* Current file being background deleted.*/ -+ int nDeletedFiles; /* Count of files awaiting deletion;*/ -+ int nUnlinkedFiles; /* Count of unlinked files. */ -+ int nBackgroundDeletions; /* Count of background deletions. */ -+ -+ -+ yaffs_TempBuffer tempBuffer[YAFFS_N_TEMP_BUFFERS]; -+ int maxTemp; -+ int unmanagedTempAllocations; -+ int unmanagedTempDeallocations; -+ -+ /* yaffs2 runtime stuff */ -+ unsigned sequenceNumber; /* Sequence number of currently allocating block */ -+ unsigned oldestDirtySequence; -+ -+}; -+ -+typedef struct yaffs_DeviceStruct yaffs_Device; -+ -+/* The static layout of bllock usage etc is stored in the super block header */ -+typedef struct { -+ int StructType; -+ int version; -+ int checkpointStartBlock; -+ int checkpointEndBlock; -+ int startBlock; -+ int endBlock; -+ int rfu[100]; -+} yaffs_SuperBlockHeader; -+ -+/* The CheckpointDevice structure holds the device information that changes at runtime and -+ * must be preserved over unmount/mount cycles. -+ */ -+typedef struct { -+ int structType; -+ int nErasedBlocks; -+ int allocationBlock; /* Current block being allocated off */ -+ __u32 allocationPage; -+ int nFreeChunks; -+ -+ int nDeletedFiles; /* Count of files awaiting deletion;*/ -+ int nUnlinkedFiles; /* Count of unlinked files. */ -+ int nBackgroundDeletions; /* Count of background deletions. */ -+ -+ /* yaffs2 runtime stuff */ -+ unsigned sequenceNumber; /* Sequence number of currently allocating block */ -+ unsigned oldestDirtySequence; -+ -+} yaffs_CheckpointDevice; -+ -+ -+typedef struct { -+ int structType; -+ __u32 magic; -+ __u32 version; -+ __u32 head; -+} yaffs_CheckpointValidity; -+ -+/* Function to manipulate block info */ -+static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk) -+{ -+ if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR), -+ blk)); -+ YBUG(); -+ } -+ return &dev->blockInfo[blk - dev->internalStartBlock]; -+} -+ -+/*----------------------- YAFFS Functions -----------------------*/ -+ -+int yaffs_GutsInitialise(yaffs_Device * dev); -+void yaffs_Deinitialise(yaffs_Device * dev); -+ -+int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev); -+ -+int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName, -+ yaffs_Object * newDir, const YCHAR * newName); -+ -+int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name); -+int yaffs_DeleteFile(yaffs_Object * obj); -+ -+int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize); -+int yaffs_GetObjectFileLength(yaffs_Object * obj); -+int yaffs_GetObjectInode(yaffs_Object * obj); -+unsigned yaffs_GetObjectType(yaffs_Object * obj); -+int yaffs_GetObjectLinkCount(yaffs_Object * obj); -+ -+int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr); -+int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr); -+ -+/* File operations */ -+int yaffs_ReadDataFromFile(yaffs_Object * obj, __u8 * buffer, loff_t offset, -+ int nBytes); -+int yaffs_WriteDataToFile(yaffs_Object * obj, const __u8 * buffer, loff_t offset, -+ int nBytes, int writeThrough); -+int yaffs_ResizeFile(yaffs_Object * obj, loff_t newSize); -+ -+yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name, -+ __u32 mode, __u32 uid, __u32 gid); -+int yaffs_FlushFile(yaffs_Object * obj, int updateTime); -+ -+/* Flushing and checkpointing */ -+void yaffs_FlushEntireDeviceCache(yaffs_Device *dev); -+ -+int yaffs_CheckpointSave(yaffs_Device *dev); -+int yaffs_CheckpointRestore(yaffs_Device *dev); -+ -+/* Directory operations */ -+yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name, -+ __u32 mode, __u32 uid, __u32 gid); -+yaffs_Object *yaffs_FindObjectByName(yaffs_Object * theDir, const YCHAR * name); -+int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir, -+ int (*fn) (yaffs_Object *)); -+ -+yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number); -+ -+/* Link operations */ -+yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name, -+ yaffs_Object * equivalentObject); -+ -+yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj); -+ -+/* Symlink operations */ -+yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name, -+ __u32 mode, __u32 uid, __u32 gid, -+ const YCHAR * alias); -+YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj); -+ -+/* Special inodes (fifos, sockets and devices) */ -+yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name, -+ __u32 mode, __u32 uid, __u32 gid, __u32 rdev); -+ -+/* Special directories */ -+yaffs_Object *yaffs_Root(yaffs_Device * dev); -+yaffs_Object *yaffs_LostNFound(yaffs_Device * dev); -+ -+#ifdef CONFIG_YAFFS_WINCE -+/* CONFIG_YAFFS_WINCE special stuff */ -+void yfsd_WinFileTimeNow(__u32 target[2]); -+#endif -+ -+#ifdef __KERNEL__ -+ -+void yaffs_HandleDeferedFree(yaffs_Object * obj); -+#endif -+ -+/* Debug dump */ -+int yaffs_DumpObject(yaffs_Object * obj); -+ -+void yaffs_GutsTest(yaffs_Device * dev); -+ -+/* A few useful functions */ -+void yaffs_InitialiseTags(yaffs_ExtendedTags * tags); -+void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn); -+int yaffs_CheckFF(__u8 * buffer, int nBytes); -+void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi); -+ -+#endif -diff -urN linux.old/fs/yaffs2/yaffsinterface.h linux.dev/fs/yaffs2/yaffsinterface.h ---- linux.old/fs/yaffs2/yaffsinterface.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffsinterface.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,23 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffsinterface.h: Interface to the guts of yaffs. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU Lesser General Public License version 2.1 as -+ * published by the Free Software Foundation. -+ * -+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL. -+ * -+ */ -+ -+#ifndef __YAFFSINTERFACE_H__ -+#define __YAFFSINTERFACE_H__ -+ -+int yaffs_Initialise(unsigned nBlocks); -+ -+#endif -diff -urN linux.old/fs/yaffs2/yaffs_mtdif2.c linux.dev/fs/yaffs2/yaffs_mtdif2.c ---- linux.old/fs/yaffs2/yaffs_mtdif2.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_mtdif2.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,234 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffs_mtdif.c NAND mtd wrapper functions. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+/* mtd interface for YAFFS2 */ -+ -+const char *yaffs_mtdif2_c_version = -+ "$Id: yaffs_mtdif2.c,v 1.15 2006/11/08 06:24:34 charles Exp $"; -+ -+#include "yportenv.h" -+ -+ -+#include "yaffs_mtdif2.h" -+ -+#include "linux/mtd/mtd.h" -+#include "linux/types.h" -+#include "linux/time.h" -+ -+#include "yaffs_packedtags2.h" -+ -+int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND, -+ const __u8 * data, -+ const yaffs_ExtendedTags * tags) -+{ -+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice); -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ struct mtd_oob_ops ops; -+#else -+ size_t dummy; -+#endif -+ int retval = 0; -+ -+ loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk; -+ -+ yaffs_PackedTags2 pt; -+ -+ T(YAFFS_TRACE_MTD, -+ (TSTR -+ ("nandmtd2_WriteChunkWithTagsToNAND chunk %d data %p tags %p" -+ TENDSTR), chunkInNAND, data, tags)); -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ if (tags) -+ yaffs_PackTags2(&pt, tags); -+ else -+ BUG(); /* both tags and data should always be present */ -+ -+ if (data) { -+ ops.mode = MTD_OOB_AUTO; -+ ops.ooblen = sizeof(pt); -+ ops.len = dev->nDataBytesPerChunk; -+ ops.ooboffs = 0; -+ ops.datbuf = (__u8 *)data; -+ ops.oobbuf = (void *)&pt; -+ retval = mtd->write_oob(mtd, addr, &ops); -+ } else -+ BUG(); /* both tags and data should always be present */ -+#else -+ if (tags) { -+ yaffs_PackTags2(&pt, tags); -+ } -+ -+ if (data && tags) { -+ if (dev->useNANDECC) -+ retval = -+ mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data, (__u8 *) & pt, NULL); -+ else -+ retval = -+ mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data, (__u8 *) & pt, NULL); -+ } else { -+ if (data) -+ retval = -+ mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy, -+ data); -+ if (tags) -+ retval = -+ mtd->write_oob(mtd, addr, mtd->oobsize, &dummy, -+ (__u8 *) & pt); -+ -+ } -+#endif -+ -+ if (retval == 0) -+ return YAFFS_OK; -+ else -+ return YAFFS_FAIL; -+} -+ -+int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND, -+ __u8 * data, yaffs_ExtendedTags * tags) -+{ -+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice); -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ struct mtd_oob_ops ops; -+#endif -+ size_t dummy; -+ int retval = 0; -+ -+ loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk; -+ -+ yaffs_PackedTags2 pt; -+ -+ T(YAFFS_TRACE_MTD, -+ (TSTR -+ ("nandmtd2_ReadChunkWithTagsFromNAND chunk %d data %p tags %p" -+ TENDSTR), chunkInNAND, data, tags)); -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ if (data && !tags) -+ retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data); -+ else if (tags) { -+ ops.mode = MTD_OOB_AUTO; -+ ops.ooblen = sizeof(pt); -+ ops.len = data ? dev->nDataBytesPerChunk : sizeof(pt); -+ ops.ooboffs = 0; -+ ops.datbuf = data; -+ ops.oobbuf = dev->spareBuffer; -+ retval = mtd->read_oob(mtd, addr, &ops); -+ } -+#else -+ if (data && tags) { -+ if (dev->useNANDECC) { -+ retval = -+ mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data, dev->spareBuffer, -+ NULL); -+ } else { -+ retval = -+ mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data, dev->spareBuffer, -+ NULL); -+ } -+ } else { -+ if (data) -+ retval = -+ mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy, -+ data); -+ if (tags) -+ retval = -+ mtd->read_oob(mtd, addr, mtd->oobsize, &dummy, -+ dev->spareBuffer); -+ } -+#endif -+ -+ memcpy(&pt, dev->spareBuffer, sizeof(pt)); -+ -+ if (tags) -+ yaffs_UnpackTags2(tags, &pt); -+ -+ if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR) -+ tags->eccResult = YAFFS_ECC_RESULT_UNFIXED; -+ -+ if (retval == 0) -+ return YAFFS_OK; -+ else -+ return YAFFS_FAIL; -+} -+ -+int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo) -+{ -+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice); -+ int retval; -+ T(YAFFS_TRACE_MTD, -+ (TSTR("nandmtd2_MarkNANDBlockBad %d" TENDSTR), blockNo)); -+ -+ retval = -+ mtd->block_markbad(mtd, -+ blockNo * dev->nChunksPerBlock * -+ dev->nDataBytesPerChunk); -+ -+ if (retval == 0) -+ return YAFFS_OK; -+ else -+ return YAFFS_FAIL; -+ -+} -+ -+int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo, -+ yaffs_BlockState * state, int *sequenceNumber) -+{ -+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice); -+ int retval; -+ -+ T(YAFFS_TRACE_MTD, -+ (TSTR("nandmtd2_QueryNANDBlock %d" TENDSTR), blockNo)); -+ retval = -+ mtd->block_isbad(mtd, -+ blockNo * dev->nChunksPerBlock * -+ dev->nDataBytesPerChunk); -+ -+ if (retval) { -+ T(YAFFS_TRACE_MTD, (TSTR("block is bad" TENDSTR))); -+ -+ *state = YAFFS_BLOCK_STATE_DEAD; -+ *sequenceNumber = 0; -+ } else { -+ yaffs_ExtendedTags t; -+ nandmtd2_ReadChunkWithTagsFromNAND(dev, -+ blockNo * -+ dev->nChunksPerBlock, NULL, -+ &t); -+ -+ if (t.chunkUsed) { -+ *sequenceNumber = t.sequenceNumber; -+ *state = YAFFS_BLOCK_STATE_NEEDS_SCANNING; -+ } else { -+ *sequenceNumber = 0; -+ *state = YAFFS_BLOCK_STATE_EMPTY; -+ } -+ } -+ T(YAFFS_TRACE_MTD, -+ (TSTR("block is bad seq %d state %d" TENDSTR), *sequenceNumber, -+ *state)); -+ -+ if (retval == 0) -+ return YAFFS_OK; -+ else -+ return YAFFS_FAIL; -+} -+ -diff -urN linux.old/fs/yaffs2/yaffs_mtdif2.h linux.dev/fs/yaffs2/yaffs_mtdif2.h ---- linux.old/fs/yaffs2/yaffs_mtdif2.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_mtdif2.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,29 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffs_mtdif.c NAND mtd wrapper functions. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#ifndef __YAFFS_MTDIF2_H__ -+#define __YAFFS_MTDIF2_H__ -+ -+#include "yaffs_guts.h" -+int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND, -+ const __u8 * data, -+ const yaffs_ExtendedTags * tags); -+int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND, -+ __u8 * data, yaffs_ExtendedTags * tags); -+int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo); -+int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo, -+ yaffs_BlockState * state, int *sequenceNumber); -+ -+#endif -diff -urN linux.old/fs/yaffs2/yaffs_mtdif.c linux.dev/fs/yaffs2/yaffs_mtdif.c ---- linux.old/fs/yaffs2/yaffs_mtdif.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_mtdif.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,243 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffs_mtdif.c NAND mtd wrapper functions. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+const char *yaffs_mtdif_c_version = -+ "$Id: yaffs_mtdif.c,v 1.17 2006/11/29 20:21:12 charles Exp $"; -+ -+#include "yportenv.h" -+ -+ -+#include "yaffs_mtdif.h" -+ -+#include "linux/mtd/mtd.h" -+#include "linux/types.h" -+#include "linux/time.h" -+#include "linux/mtd/nand.h" -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)) -+static struct nand_oobinfo yaffs_oobinfo = { -+ .useecc = 1, -+ .eccbytes = 6, -+ .eccpos = {8, 9, 10, 13, 14, 15} -+}; -+ -+static struct nand_oobinfo yaffs_noeccinfo = { -+ .useecc = 0, -+}; -+#endif -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+static inline void translate_spare2oob(const yaffs_Spare *spare, __u8 *oob) -+{ -+ oob[0] = spare->tagByte0; -+ oob[1] = spare->tagByte1; -+ oob[2] = spare->tagByte2; -+ oob[3] = spare->tagByte3; -+ oob[4] = spare->tagByte4; -+ oob[5] = spare->tagByte5 & 0x3f; -+ oob[5] |= spare->blockStatus == 'Y' ? 0: 0x80; -+ oob[5] |= spare->pageStatus == 0 ? 0: 0x40; -+ oob[6] = spare->tagByte6; -+ oob[7] = spare->tagByte7; -+} -+ -+static inline void translate_oob2spare(yaffs_Spare *spare, __u8 *oob) -+{ -+ struct yaffs_NANDSpare *nspare = (struct yaffs_NANDSpare *)spare; -+ spare->tagByte0 = oob[0]; -+ spare->tagByte1 = oob[1]; -+ spare->tagByte2 = oob[2]; -+ spare->tagByte3 = oob[3]; -+ spare->tagByte4 = oob[4]; -+ spare->tagByte5 = oob[5] == 0xff ? 0xff : oob[5] & 0x3f; -+ spare->blockStatus = oob[5] & 0x80 ? 0xff : 'Y'; -+ spare->pageStatus = oob[5] & 0x40 ? 0xff : 0; -+ spare->ecc1[0] = spare->ecc1[1] = spare->ecc1[2] = 0xff; -+ spare->tagByte6 = oob[6]; -+ spare->tagByte7 = oob[7]; -+ spare->ecc2[0] = spare->ecc2[1] = spare->ecc2[2] = 0xff; -+ -+ nspare->eccres1 = nspare->eccres2 = 0; /* FIXME */ -+} -+#endif -+ -+int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND, -+ const __u8 * data, const yaffs_Spare * spare) -+{ -+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice); -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ struct mtd_oob_ops ops; -+#endif -+ size_t dummy; -+ int retval = 0; -+ -+ loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk; -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ __u8 spareAsBytes[8]; /* OOB */ -+ -+ if (data && !spare) -+ retval = mtd->write(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data); -+ else if (spare) { -+ if (dev->useNANDECC) { -+ translate_spare2oob(spare, spareAsBytes); -+ ops.mode = MTD_OOB_AUTO; -+ ops.ooblen = 8; /* temp hack */ -+ } else { -+ ops.mode = MTD_OOB_RAW; -+ ops.ooblen = YAFFS_BYTES_PER_SPARE; -+ } -+ ops.len = data ? dev->nDataBytesPerChunk : ops.ooblen; -+ ops.datbuf = (u8 *)data; -+ ops.ooboffs = 0; -+ ops.oobbuf = spareAsBytes; -+ retval = mtd->write_oob(mtd, addr, &ops); -+ } -+#else -+ __u8 *spareAsBytes = (__u8 *) spare; -+ -+ if (data && spare) { -+ if (dev->useNANDECC) -+ retval = -+ mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data, spareAsBytes, -+ &yaffs_oobinfo); -+ else -+ retval = -+ mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data, spareAsBytes, -+ &yaffs_noeccinfo); -+ } else { -+ if (data) -+ retval = -+ mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy, -+ data); -+ if (spare) -+ retval = -+ mtd->write_oob(mtd, addr, YAFFS_BYTES_PER_SPARE, -+ &dummy, spareAsBytes); -+ } -+#endif -+ -+ if (retval == 0) -+ return YAFFS_OK; -+ else -+ return YAFFS_FAIL; -+} -+ -+int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data, -+ yaffs_Spare * spare) -+{ -+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice); -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ struct mtd_oob_ops ops; -+#endif -+ size_t dummy; -+ int retval = 0; -+ -+ loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk; -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17)) -+ __u8 spareAsBytes[8]; /* OOB */ -+ -+ if (data && !spare) -+ retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data); -+ else if (spare) { -+ if (dev->useNANDECC) { -+ ops.mode = MTD_OOB_AUTO; -+ ops.ooblen = 8; /* temp hack */ -+ } else { -+ ops.mode = MTD_OOB_RAW; -+ ops.ooblen = YAFFS_BYTES_PER_SPARE; -+ } -+ ops.len = data ? dev->nDataBytesPerChunk : ops.ooblen; -+ ops.datbuf = data; -+ ops.ooboffs = 0; -+ ops.oobbuf = spareAsBytes; -+ retval = mtd->read_oob(mtd, addr, &ops); -+ if (dev->useNANDECC) -+ translate_oob2spare(spare, spareAsBytes); -+ } -+#else -+ __u8 *spareAsBytes = (__u8 *) spare; -+ -+ if (data && spare) { -+ if (dev->useNANDECC) { -+ /* Careful, this call adds 2 ints */ -+ /* to the end of the spare data. Calling function */ -+ /* should allocate enough memory for spare, */ -+ /* i.e. [YAFFS_BYTES_PER_SPARE+2*sizeof(int)]. */ -+ retval = -+ mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data, spareAsBytes, -+ &yaffs_oobinfo); -+ } else { -+ retval = -+ mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk, -+ &dummy, data, spareAsBytes, -+ &yaffs_noeccinfo); -+ } -+ } else { -+ if (data) -+ retval = -+ mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy, -+ data); -+ if (spare) -+ retval = -+ mtd->read_oob(mtd, addr, YAFFS_BYTES_PER_SPARE, -+ &dummy, spareAsBytes); -+ } -+#endif -+ -+ if (retval == 0) -+ return YAFFS_OK; -+ else -+ return YAFFS_FAIL; -+} -+ -+int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber) -+{ -+ struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice); -+ __u32 addr = -+ ((loff_t) blockNumber) * dev->nDataBytesPerChunk -+ * dev->nChunksPerBlock; -+ struct erase_info ei; -+ int retval = 0; -+ -+ ei.mtd = mtd; -+ ei.addr = addr; -+ ei.len = dev->nDataBytesPerChunk * dev->nChunksPerBlock; -+ ei.time = 1000; -+ ei.retries = 2; -+ ei.callback = NULL; -+ ei.priv = (u_long) dev; -+ -+ /* Todo finish off the ei if required */ -+ -+ sema_init(&dev->sem, 0); -+ -+ retval = mtd->erase(mtd, &ei); -+ -+ if (retval == 0) -+ return YAFFS_OK; -+ else -+ return YAFFS_FAIL; -+} -+ -+int nandmtd_InitialiseNAND(yaffs_Device * dev) -+{ -+ return YAFFS_OK; -+} -+ -diff -urN linux.old/fs/yaffs2/yaffs_mtdif.h linux.dev/fs/yaffs2/yaffs_mtdif.h ---- linux.old/fs/yaffs2/yaffs_mtdif.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_mtdif.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,31 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffs_mtdif.h NAND mtd interface wrappers -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU Lesser General Public License version 2.1 as -+ * published by the Free Software Foundation. -+ * -+ * -+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL. -+ * -+ * $Id: yaffs_mtdif.h,v 1.3 2005/08/11 01:07:43 marty Exp $ -+ */ -+ -+#ifndef __YAFFS_MTDIF_H__ -+#define __YAFFS_MTDIF_H__ -+ -+#include "yaffs_guts.h" -+ -+int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND, -+ const __u8 * data, const yaffs_Spare * spare); -+int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data, -+ yaffs_Spare * spare); -+int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber); -+int nandmtd_InitialiseNAND(yaffs_Device * dev); -+#endif -diff -urN linux.old/fs/yaffs2/yaffs_nand.c linux.dev/fs/yaffs2/yaffs_nand.c ---- linux.old/fs/yaffs2/yaffs_nand.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_nand.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,135 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+const char *yaffs_nand_c_version = -+ "$Id: yaffs_nand.c,v 1.5 2006/11/08 09:52:12 charles Exp $"; -+ -+#include "yaffs_nand.h" -+#include "yaffs_tagscompat.h" -+#include "yaffs_tagsvalidity.h" -+ -+ -+int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND, -+ __u8 * buffer, -+ yaffs_ExtendedTags * tags) -+{ -+ int result; -+ yaffs_ExtendedTags localTags; -+ -+ int realignedChunkInNAND = chunkInNAND - dev->chunkOffset; -+ -+ /* If there are no tags provided, use local tags to get prioritised gc working */ -+ if(!tags) -+ tags = &localTags; -+ -+ if (dev->readChunkWithTagsFromNAND) -+ result = dev->readChunkWithTagsFromNAND(dev, realignedChunkInNAND, buffer, -+ tags); -+ else -+ result = yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(dev, -+ realignedChunkInNAND, -+ buffer, -+ tags); -+ if(tags && -+ tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR){ -+ -+ yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, chunkInNAND/dev->nChunksPerBlock); -+ yaffs_HandleChunkError(dev,bi); -+ } -+ -+ return result; -+} -+ -+int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev, -+ int chunkInNAND, -+ const __u8 * buffer, -+ yaffs_ExtendedTags * tags) -+{ -+ chunkInNAND -= dev->chunkOffset; -+ -+ -+ if (tags) { -+ tags->sequenceNumber = dev->sequenceNumber; -+ tags->chunkUsed = 1; -+ if (!yaffs_ValidateTags(tags)) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("Writing uninitialised tags" TENDSTR))); -+ YBUG(); -+ } -+ T(YAFFS_TRACE_WRITE, -+ (TSTR("Writing chunk %d tags %d %d" TENDSTR), chunkInNAND, -+ tags->objectId, tags->chunkId)); -+ } else { -+ T(YAFFS_TRACE_ERROR, (TSTR("Writing with no tags" TENDSTR))); -+ YBUG(); -+ } -+ -+ if (dev->writeChunkWithTagsToNAND) -+ return dev->writeChunkWithTagsToNAND(dev, chunkInNAND, buffer, -+ tags); -+ else -+ return yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(dev, -+ chunkInNAND, -+ buffer, -+ tags); -+} -+ -+int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo) -+{ -+ blockNo -= dev->blockOffset; -+ -+; -+ if (dev->markNANDBlockBad) -+ return dev->markNANDBlockBad(dev, blockNo); -+ else -+ return yaffs_TagsCompatabilityMarkNANDBlockBad(dev, blockNo); -+} -+ -+int yaffs_QueryInitialBlockState(yaffs_Device * dev, -+ int blockNo, -+ yaffs_BlockState * state, -+ unsigned *sequenceNumber) -+{ -+ blockNo -= dev->blockOffset; -+ -+ if (dev->queryNANDBlock) -+ return dev->queryNANDBlock(dev, blockNo, state, sequenceNumber); -+ else -+ return yaffs_TagsCompatabilityQueryNANDBlock(dev, blockNo, -+ state, -+ sequenceNumber); -+} -+ -+ -+int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev, -+ int blockInNAND) -+{ -+ int result; -+ -+ blockInNAND -= dev->blockOffset; -+ -+ -+ dev->nBlockErasures++; -+ result = dev->eraseBlockInNAND(dev, blockInNAND); -+ -+ return result; -+} -+ -+int yaffs_InitialiseNAND(struct yaffs_DeviceStruct *dev) -+{ -+ return dev->initialiseNAND(dev); -+} -+ -+ -+ -diff -urN linux.old/fs/yaffs2/yaffs_nandemul2k.h linux.dev/fs/yaffs2/yaffs_nandemul2k.h ---- linux.old/fs/yaffs2/yaffs_nandemul2k.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_nandemul2k.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,42 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU Lesser General Public License version 2.1 as -+ * published by the Free Software Foundation. -+ * -+ * -+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL. -+ * -+ * yaffs_nandemul2k.h: Interface to emulated NAND functions (2k page size) -+ * -+ * $Id: yaffs_nandemul2k.h,v 1.2 2005/08/11 02:37:49 marty Exp $ -+ */ -+ -+#ifndef __YAFFS_NANDEMUL2K_H__ -+#define __YAFFS_NANDEMUL2K_H__ -+ -+#include "yaffs_guts.h" -+ -+int nandemul2k_WriteChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev, -+ int chunkInNAND, const __u8 * data, -+ yaffs_ExtendedTags * tags); -+int nandemul2k_ReadChunkWithTagsFromNAND(struct yaffs_DeviceStruct *dev, -+ int chunkInNAND, __u8 * data, -+ yaffs_ExtendedTags * tags); -+int nandemul2k_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo); -+int nandemul2k_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo, -+ yaffs_BlockState * state, int *sequenceNumber); -+int nandemul2k_EraseBlockInNAND(struct yaffs_DeviceStruct *dev, -+ int blockInNAND); -+int nandemul2k_InitialiseNAND(struct yaffs_DeviceStruct *dev); -+int nandemul2k_GetBytesPerChunk(void); -+int nandemul2k_GetChunksPerBlock(void); -+int nandemul2k_GetNumberOfBlocks(void); -+ -+#endif -diff -urN linux.old/fs/yaffs2/yaffs_nand.h linux.dev/fs/yaffs2/yaffs_nand.h ---- linux.old/fs/yaffs2/yaffs_nand.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_nand.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,43 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#ifndef __YAFFS_NAND_H__ -+#define __YAFFS_NAND_H__ -+#include "yaffs_guts.h" -+ -+ -+ -+int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND, -+ __u8 * buffer, -+ yaffs_ExtendedTags * tags); -+ -+int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev, -+ int chunkInNAND, -+ const __u8 * buffer, -+ yaffs_ExtendedTags * tags); -+ -+int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo); -+ -+int yaffs_QueryInitialBlockState(yaffs_Device * dev, -+ int blockNo, -+ yaffs_BlockState * state, -+ unsigned *sequenceNumber); -+ -+int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev, -+ int blockInNAND); -+ -+int yaffs_InitialiseNAND(struct yaffs_DeviceStruct *dev); -+ -+#endif -+ -diff -urN linux.old/fs/yaffs2/yaffs_packedtags1.c linux.dev/fs/yaffs2/yaffs_packedtags1.c ---- linux.old/fs/yaffs2/yaffs_packedtags1.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_packedtags1.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,39 @@ -+#include "yaffs_packedtags1.h" -+#include "yportenv.h" -+ -+void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t) -+{ -+ pt->chunkId = t->chunkId; -+ pt->serialNumber = t->serialNumber; -+ pt->byteCount = t->byteCount; -+ pt->objectId = t->objectId; -+ pt->ecc = 0; -+ pt->deleted = (t->chunkDeleted) ? 0 : 1; -+ pt->unusedStuff = 0; -+ pt->shouldBeFF = 0xFFFFFFFF; -+ -+} -+ -+void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt) -+{ -+ static const __u8 allFF[] = -+ { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -+0xff }; -+ -+ if (memcmp(allFF, pt, sizeof(yaffs_PackedTags1))) { -+ t->blockBad = 0; -+ if (pt->shouldBeFF != 0xFFFFFFFF) { -+ t->blockBad = 1; -+ } -+ t->chunkUsed = 1; -+ t->objectId = pt->objectId; -+ t->chunkId = pt->chunkId; -+ t->byteCount = pt->byteCount; -+ t->eccResult = YAFFS_ECC_RESULT_NO_ERROR; -+ t->chunkDeleted = (pt->deleted) ? 0 : 1; -+ t->serialNumber = pt->serialNumber; -+ } else { -+ memset(t, 0, sizeof(yaffs_ExtendedTags)); -+ -+ } -+} -diff -urN linux.old/fs/yaffs2/yaffs_packedtags1.h linux.dev/fs/yaffs2/yaffs_packedtags1.h ---- linux.old/fs/yaffs2/yaffs_packedtags1.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_packedtags1.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,22 @@ -+// This is used to pack YAFFS1 tags, not YAFFS2 tags. -+ -+#ifndef __YAFFS_PACKEDTAGS1_H__ -+#define __YAFFS_PACKEDTAGS1_H__ -+ -+#include "yaffs_guts.h" -+ -+typedef struct { -+ unsigned chunkId:20; -+ unsigned serialNumber:2; -+ unsigned byteCount:10; -+ unsigned objectId:18; -+ unsigned ecc:12; -+ unsigned deleted:1; -+ unsigned unusedStuff:1; -+ unsigned shouldBeFF; -+ -+} yaffs_PackedTags1; -+ -+void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t); -+void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt); -+#endif -diff -urN linux.old/fs/yaffs2/yaffs_packedtags2.c linux.dev/fs/yaffs2/yaffs_packedtags2.c ---- linux.old/fs/yaffs2/yaffs_packedtags2.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_packedtags2.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,184 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * yaffs_packedtags2.c: Tags packing for YAFFS2 -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * -+ * Created by Charles Manning -+ * -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU Lesser General Public License -+ * version 2.1 as published by the Free Software Foundation. -+ */ -+ -+#include "yaffs_packedtags2.h" -+#include "yportenv.h" -+#include "yaffs_tagsvalidity.h" -+ -+/* This code packs a set of extended tags into a binary structure for -+ * NAND storage -+ */ -+ -+/* Some of the information is "extra" struff which can be packed in to -+ * speed scanning -+ * This is defined by having the EXTRA_HEADER_INFO_FLAG set. -+ */ -+ -+/* Extra flags applied to chunkId */ -+ -+#define EXTRA_HEADER_INFO_FLAG 0x80000000 -+#define EXTRA_SHRINK_FLAG 0x40000000 -+#define EXTRA_SHADOWS_FLAG 0x20000000 -+#define EXTRA_SPARE_FLAGS 0x10000000 -+ -+#define ALL_EXTRA_FLAGS 0xF0000000 -+ -+/* Also, the top 4 bits of the object Id are set to the object type. */ -+#define EXTRA_OBJECT_TYPE_SHIFT (28) -+#define EXTRA_OBJECT_TYPE_MASK ((0x0F) << EXTRA_OBJECT_TYPE_SHIFT) -+ -+static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 * pt) -+{ -+ T(YAFFS_TRACE_MTD, -+ (TSTR("packed tags obj %d chunk %d byte %d seq %d" TENDSTR), -+ pt->t.objectId, pt->t.chunkId, pt->t.byteCount, -+ pt->t.sequenceNumber)); -+} -+ -+static void yaffs_DumpTags2(const yaffs_ExtendedTags * t) -+{ -+ T(YAFFS_TRACE_MTD, -+ (TSTR -+ ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte " -+ "%d del %d ser %d seq %d" -+ TENDSTR), t->eccResult, t->blockBad, t->chunkUsed, t->objectId, -+ t->chunkId, t->byteCount, t->chunkDeleted, t->serialNumber, -+ t->sequenceNumber)); -+ -+} -+ -+void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t) -+{ -+ pt->t.chunkId = t->chunkId; -+ pt->t.sequenceNumber = t->sequenceNumber; -+ pt->t.byteCount = t->byteCount; -+ pt->t.objectId = t->objectId; -+ -+ if (t->chunkId == 0 && t->extraHeaderInfoAvailable) { -+ /* Store the extra header info instead */ -+ /* We save the parent object in the chunkId */ -+ pt->t.chunkId = EXTRA_HEADER_INFO_FLAG -+ | t->extraParentObjectId; -+ if (t->extraIsShrinkHeader) { -+ pt->t.chunkId |= EXTRA_SHRINK_FLAG; -+ } -+ if (t->extraShadows) { -+ pt->t.chunkId |= EXTRA_SHADOWS_FLAG; -+ } -+ -+ pt->t.objectId &= ~EXTRA_OBJECT_TYPE_MASK; -+ pt->t.objectId |= -+ (t->extraObjectType << EXTRA_OBJECT_TYPE_SHIFT); -+ -+ if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) { -+ pt->t.byteCount = t->extraEquivalentObjectId; -+ } else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE) { -+ pt->t.byteCount = t->extraFileLength; -+ } else { -+ pt->t.byteCount = 0; -+ } -+ } -+ -+ yaffs_DumpPackedTags2(pt); -+ yaffs_DumpTags2(t); -+ -+#ifndef YAFFS_IGNORE_TAGS_ECC -+ { -+ yaffs_ECCCalculateOther((unsigned char *)&pt->t, -+ sizeof(yaffs_PackedTags2TagsPart), -+ &pt->ecc); -+ } -+#endif -+} -+ -+void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt) -+{ -+ -+ memset(t, 0, sizeof(yaffs_ExtendedTags)); -+ -+ yaffs_InitialiseTags(t); -+ -+ if (pt->t.sequenceNumber != 0xFFFFFFFF) { -+ /* Page is in use */ -+#ifdef YAFFS_IGNORE_TAGS_ECC -+ { -+ t->eccResult = YAFFS_ECC_RESULT_NO_ERROR; -+ } -+#else -+ { -+ yaffs_ECCOther ecc; -+ int result; -+ yaffs_ECCCalculateOther((unsigned char *)&pt->t, -+ sizeof -+ (yaffs_PackedTags2TagsPart), -+ &ecc); -+ result = -+ yaffs_ECCCorrectOther((unsigned char *)&pt->t, -+ sizeof -+ (yaffs_PackedTags2TagsPart), -+ &pt->ecc, &ecc); -+ switch(result){ -+ case 0: -+ t->eccResult = YAFFS_ECC_RESULT_NO_ERROR; -+ break; -+ case 1: -+ t->eccResult = YAFFS_ECC_RESULT_FIXED; -+ break; -+ case -1: -+ t->eccResult = YAFFS_ECC_RESULT_UNFIXED; -+ break; -+ default: -+ t->eccResult = YAFFS_ECC_RESULT_UNKNOWN; -+ } -+ } -+#endif -+ t->blockBad = 0; -+ t->chunkUsed = 1; -+ t->objectId = pt->t.objectId; -+ t->chunkId = pt->t.chunkId; -+ t->byteCount = pt->t.byteCount; -+ t->chunkDeleted = 0; -+ t->serialNumber = 0; -+ t->sequenceNumber = pt->t.sequenceNumber; -+ -+ /* Do extra header info stuff */ -+ -+ if (pt->t.chunkId & EXTRA_HEADER_INFO_FLAG) { -+ t->chunkId = 0; -+ t->byteCount = 0; -+ -+ t->extraHeaderInfoAvailable = 1; -+ t->extraParentObjectId = -+ pt->t.chunkId & (~(ALL_EXTRA_FLAGS)); -+ t->extraIsShrinkHeader = -+ (pt->t.chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0; -+ t->extraShadows = -+ (pt->t.chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0; -+ t->extraObjectType = -+ pt->t.objectId >> EXTRA_OBJECT_TYPE_SHIFT; -+ t->objectId &= ~EXTRA_OBJECT_TYPE_MASK; -+ -+ if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) { -+ t->extraEquivalentObjectId = pt->t.byteCount; -+ } else { -+ t->extraFileLength = pt->t.byteCount; -+ } -+ } -+ } -+ -+ yaffs_DumpPackedTags2(pt); -+ yaffs_DumpTags2(t); -+ -+} -diff -urN linux.old/fs/yaffs2/yaffs_packedtags2.h linux.dev/fs/yaffs2/yaffs_packedtags2.h ---- linux.old/fs/yaffs2/yaffs_packedtags2.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_packedtags2.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,23 @@ -+/* This is used to pack YAFFS2 tags, not YAFFS1tags. */ -+ -+#ifndef __YAFFS_PACKEDTAGS2_H__ -+#define __YAFFS_PACKEDTAGS2_H__ -+ -+#include "yaffs_guts.h" -+#include "yaffs_ecc.h" -+ -+typedef struct { -+ unsigned sequenceNumber; -+ unsigned objectId; -+ unsigned chunkId; -+ unsigned byteCount; -+} yaffs_PackedTags2TagsPart; -+ -+typedef struct { -+ yaffs_PackedTags2TagsPart t; -+ yaffs_ECCOther ecc; -+} yaffs_PackedTags2; -+ -+void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t); -+void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt); -+#endif -diff -urN linux.old/fs/yaffs2/yaffs_qsort.c linux.dev/fs/yaffs2/yaffs_qsort.c ---- linux.old/fs/yaffs2/yaffs_qsort.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_qsort.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,156 @@ -+/* -+ * Copyright (c) 1992, 1993 -+ * The Regents of the University of California. All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. Neither the name of the University nor the names of its contributors -+ * may be used to endorse or promote products derived from this software -+ * without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+ * SUCH DAMAGE. -+ */ -+ -+#include "yportenv.h" -+//#include -+ -+/* -+ * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function". -+ */ -+#define swapcode(TYPE, parmi, parmj, n) { \ -+ long i = (n) / sizeof (TYPE); \ -+ register TYPE *pi = (TYPE *) (parmi); \ -+ register TYPE *pj = (TYPE *) (parmj); \ -+ do { \ -+ register TYPE t = *pi; \ -+ *pi++ = *pj; \ -+ *pj++ = t; \ -+ } while (--i > 0); \ -+} -+ -+#define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \ -+ es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1; -+ -+static __inline void -+swapfunc(char *a, char *b, int n, int swaptype) -+{ -+ if (swaptype <= 1) -+ swapcode(long, a, b, n) -+ else -+ swapcode(char, a, b, n) -+} -+ -+#define swap(a, b) \ -+ if (swaptype == 0) { \ -+ long t = *(long *)(a); \ -+ *(long *)(a) = *(long *)(b); \ -+ *(long *)(b) = t; \ -+ } else \ -+ swapfunc(a, b, es, swaptype) -+ -+#define vecswap(a, b, n) if ((n) > 0) swapfunc(a, b, n, swaptype) -+ -+static __inline char * -+med3(char *a, char *b, char *c, int (*cmp)(const void *, const void *)) -+{ -+ return cmp(a, b) < 0 ? -+ (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a )) -+ :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c )); -+} -+ -+#define min(a,b) (((a) < (b)) ? (a) : (b)) -+void -+qsort(void *aa, size_t n, size_t es, int (*cmp)(const void *, const void *)) -+{ -+ char *pa, *pb, *pc, *pd, *pl, *pm, *pn; -+ int d, r, swaptype, swap_cnt; -+ register char *a = aa; -+ -+loop: SWAPINIT(a, es); -+ swap_cnt = 0; -+ if (n < 7) { -+ for (pm = (char *)a + es; pm < (char *) a + n * es; pm += es) -+ for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0; -+ pl -= es) -+ swap(pl, pl - es); -+ return; -+ } -+ pm = (char *)a + (n / 2) * es; -+ if (n > 7) { -+ pl = (char *)a; -+ pn = (char *)a + (n - 1) * es; -+ if (n > 40) { -+ d = (n / 8) * es; -+ pl = med3(pl, pl + d, pl + 2 * d, cmp); -+ pm = med3(pm - d, pm, pm + d, cmp); -+ pn = med3(pn - 2 * d, pn - d, pn, cmp); -+ } -+ pm = med3(pl, pm, pn, cmp); -+ } -+ swap(a, pm); -+ pa = pb = (char *)a + es; -+ -+ pc = pd = (char *)a + (n - 1) * es; -+ for (;;) { -+ while (pb <= pc && (r = cmp(pb, a)) <= 0) { -+ if (r == 0) { -+ swap_cnt = 1; -+ swap(pa, pb); -+ pa += es; -+ } -+ pb += es; -+ } -+ while (pb <= pc && (r = cmp(pc, a)) >= 0) { -+ if (r == 0) { -+ swap_cnt = 1; -+ swap(pc, pd); -+ pd -= es; -+ } -+ pc -= es; -+ } -+ if (pb > pc) -+ break; -+ swap(pb, pc); -+ swap_cnt = 1; -+ pb += es; -+ pc -= es; -+ } -+ if (swap_cnt == 0) { /* Switch to insertion sort */ -+ for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es) -+ for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0; -+ pl -= es) -+ swap(pl, pl - es); -+ return; -+ } -+ -+ pn = (char *)a + n * es; -+ r = min(pa - (char *)a, pb - pa); -+ vecswap(a, pb - r, r); -+ r = min((long)(pd - pc), (long)(pn - pd - es)); -+ vecswap(pb, pn - r, r); -+ if ((r = pb - pa) > es) -+ qsort(a, r / es, es, cmp); -+ if ((r = pd - pc) > es) { -+ /* Iterate rather than recurse to save stack space */ -+ a = pn - r; -+ n = r / es; -+ goto loop; -+ } -+/* qsort(pn - r, r / es, es, cmp);*/ -+} -diff -urN linux.old/fs/yaffs2/yaffs_qsort.h linux.dev/fs/yaffs2/yaffs_qsort.h ---- linux.old/fs/yaffs2/yaffs_qsort.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_qsort.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,23 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffs_qsort.h: Interface to BSD-licensed qsort routine. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU Lesser General Public License version 2.1 as -+ * published by the Free Software Foundation. -+ * -+ * $Id: yaffs_qsort.h,v 1.2 2006/11/07 23:20:09 charles Exp $ -+ */ -+ -+#ifndef __YAFFS_QSORT_H__ -+#define __YAFFS_QSORT_H__ -+ -+extern void qsort (void *const base, size_t total_elems, size_t size, -+ int (*cmp)(const void *, const void *)); -+ -+#endif -diff -urN linux.old/fs/yaffs2/yaffs_tagscompat.c linux.dev/fs/yaffs2/yaffs_tagscompat.c ---- linux.old/fs/yaffs2/yaffs_tagscompat.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_tagscompat.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,532 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffs_tagscompat.h: Tags compatability layer to use YAFFS1 formatted NAND. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * $Id: yaffs_tagscompat.c,v 1.8 2005/11/29 20:54:32 marty Exp $ -+ */ -+ -+#include "yaffs_guts.h" -+#include "yaffs_tagscompat.h" -+#include "yaffs_ecc.h" -+ -+static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND); -+#ifdef NOTYET -+static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND); -+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND, -+ const __u8 * data, -+ const yaffs_Spare * spare); -+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND, -+ const yaffs_Spare * spare); -+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND); -+#endif -+ -+static const char yaffs_countBitsTable[256] = { -+ 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4, -+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, -+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, -+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, -+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, -+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, -+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, -+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, -+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5, -+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, -+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, -+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, -+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6, -+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, -+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7, -+ 4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8 -+}; -+ -+static int yaffs_CountBits(__u8 x) -+{ -+ int retVal; -+ retVal = yaffs_countBitsTable[x]; -+ return retVal; -+} -+ -+/********** Tags ECC calculations *********/ -+ -+void yaffs_CalcECC(const __u8 * data, yaffs_Spare * spare) -+{ -+ yaffs_ECCCalculate(data, spare->ecc1); -+ yaffs_ECCCalculate(&data[256], spare->ecc2); -+} -+ -+void yaffs_CalcTagsECC(yaffs_Tags * tags) -+{ -+ /* Calculate an ecc */ -+ -+ unsigned char *b = ((yaffs_TagsUnion *) tags)->asBytes; -+ unsigned i, j; -+ unsigned ecc = 0; -+ unsigned bit = 0; -+ -+ tags->ecc = 0; -+ -+ for (i = 0; i < 8; i++) { -+ for (j = 1; j & 0xff; j <<= 1) { -+ bit++; -+ if (b[i] & j) { -+ ecc ^= bit; -+ } -+ } -+ } -+ -+ tags->ecc = ecc; -+ -+} -+ -+int yaffs_CheckECCOnTags(yaffs_Tags * tags) -+{ -+ unsigned ecc = tags->ecc; -+ -+ yaffs_CalcTagsECC(tags); -+ -+ ecc ^= tags->ecc; -+ -+ if (ecc && ecc <= 64) { -+ /* TODO: Handle the failure better. Retire? */ -+ unsigned char *b = ((yaffs_TagsUnion *) tags)->asBytes; -+ -+ ecc--; -+ -+ b[ecc / 8] ^= (1 << (ecc & 7)); -+ -+ /* Now recvalc the ecc */ -+ yaffs_CalcTagsECC(tags); -+ -+ return 1; /* recovered error */ -+ } else if (ecc) { -+ /* Wierd ecc failure value */ -+ /* TODO Need to do somethiong here */ -+ return -1; /* unrecovered error */ -+ } -+ -+ return 0; -+} -+ -+/********** Tags **********/ -+ -+static void yaffs_LoadTagsIntoSpare(yaffs_Spare * sparePtr, -+ yaffs_Tags * tagsPtr) -+{ -+ yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr; -+ -+ yaffs_CalcTagsECC(tagsPtr); -+ -+ sparePtr->tagByte0 = tu->asBytes[0]; -+ sparePtr->tagByte1 = tu->asBytes[1]; -+ sparePtr->tagByte2 = tu->asBytes[2]; -+ sparePtr->tagByte3 = tu->asBytes[3]; -+ sparePtr->tagByte4 = tu->asBytes[4]; -+ sparePtr->tagByte5 = tu->asBytes[5]; -+ sparePtr->tagByte6 = tu->asBytes[6]; -+ sparePtr->tagByte7 = tu->asBytes[7]; -+} -+ -+static void yaffs_GetTagsFromSpare(yaffs_Device * dev, yaffs_Spare * sparePtr, -+ yaffs_Tags * tagsPtr) -+{ -+ yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr; -+ int result; -+ -+ tu->asBytes[0] = sparePtr->tagByte0; -+ tu->asBytes[1] = sparePtr->tagByte1; -+ tu->asBytes[2] = sparePtr->tagByte2; -+ tu->asBytes[3] = sparePtr->tagByte3; -+ tu->asBytes[4] = sparePtr->tagByte4; -+ tu->asBytes[5] = sparePtr->tagByte5; -+ tu->asBytes[6] = sparePtr->tagByte6; -+ tu->asBytes[7] = sparePtr->tagByte7; -+ -+ result = yaffs_CheckECCOnTags(tagsPtr); -+ if (result > 0) { -+ dev->tagsEccFixed++; -+ } else if (result < 0) { -+ dev->tagsEccUnfixed++; -+ } -+} -+ -+static void yaffs_SpareInitialise(yaffs_Spare * spare) -+{ -+ memset(spare, 0xFF, sizeof(yaffs_Spare)); -+} -+ -+static int yaffs_WriteChunkToNAND(struct yaffs_DeviceStruct *dev, -+ int chunkInNAND, const __u8 * data, -+ yaffs_Spare * spare) -+{ -+ if (chunkInNAND < dev->startBlock * dev->nChunksPerBlock) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR("**>> yaffs chunk %d is not valid" TENDSTR), -+ chunkInNAND)); -+ return YAFFS_FAIL; -+ } -+ -+ dev->nPageWrites++; -+ return dev->writeChunkToNAND(dev, chunkInNAND, data, spare); -+} -+ -+static int yaffs_ReadChunkFromNAND(struct yaffs_DeviceStruct *dev, -+ int chunkInNAND, -+ __u8 * data, -+ yaffs_Spare * spare, -+ yaffs_ECCResult * eccResult, -+ int doErrorCorrection) -+{ -+ int retVal; -+ yaffs_Spare localSpare; -+ -+ dev->nPageReads++; -+ -+ if (!spare && data) { -+ /* If we don't have a real spare, then we use a local one. */ -+ /* Need this for the calculation of the ecc */ -+ spare = &localSpare; -+ } -+ -+ if (!dev->useNANDECC) { -+ retVal = dev->readChunkFromNAND(dev, chunkInNAND, data, spare); -+ if (data && doErrorCorrection) { -+ /* Do ECC correction */ -+ /* Todo handle any errors */ -+ int eccResult1, eccResult2; -+ __u8 calcEcc[3]; -+ -+ yaffs_ECCCalculate(data, calcEcc); -+ eccResult1 = -+ yaffs_ECCCorrect(data, spare->ecc1, calcEcc); -+ yaffs_ECCCalculate(&data[256], calcEcc); -+ eccResult2 = -+ yaffs_ECCCorrect(&data[256], spare->ecc2, calcEcc); -+ -+ if (eccResult1 > 0) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>>yaffs ecc error fix performed on chunk %d:0" -+ TENDSTR), chunkInNAND)); -+ dev->eccFixed++; -+ } else if (eccResult1 < 0) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>>yaffs ecc error unfixed on chunk %d:0" -+ TENDSTR), chunkInNAND)); -+ dev->eccUnfixed++; -+ } -+ -+ if (eccResult2 > 0) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>>yaffs ecc error fix performed on chunk %d:1" -+ TENDSTR), chunkInNAND)); -+ dev->eccFixed++; -+ } else if (eccResult2 < 0) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>>yaffs ecc error unfixed on chunk %d:1" -+ TENDSTR), chunkInNAND)); -+ dev->eccUnfixed++; -+ } -+ -+ if (eccResult1 || eccResult2) { -+ /* We had a data problem on this page */ -+ yaffs_HandleReadDataError(dev, chunkInNAND); -+ } -+ -+ if (eccResult1 < 0 || eccResult2 < 0) -+ *eccResult = YAFFS_ECC_RESULT_UNFIXED; -+ else if (eccResult1 > 0 || eccResult2 > 0) -+ *eccResult = YAFFS_ECC_RESULT_FIXED; -+ else -+ *eccResult = YAFFS_ECC_RESULT_NO_ERROR; -+ } -+ } else { -+ /* Must allocate enough memory for spare+2*sizeof(int) */ -+ /* for ecc results from device. */ -+ struct yaffs_NANDSpare nspare; -+ retVal = -+ dev->readChunkFromNAND(dev, chunkInNAND, data, -+ (yaffs_Spare *) & nspare); -+ memcpy(spare, &nspare, sizeof(yaffs_Spare)); -+ if (data && doErrorCorrection) { -+ if (nspare.eccres1 > 0) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>>mtd ecc error fix performed on chunk %d:0" -+ TENDSTR), chunkInNAND)); -+ } else if (nspare.eccres1 < 0) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>>mtd ecc error unfixed on chunk %d:0" -+ TENDSTR), chunkInNAND)); -+ } -+ -+ if (nspare.eccres2 > 0) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>>mtd ecc error fix performed on chunk %d:1" -+ TENDSTR), chunkInNAND)); -+ } else if (nspare.eccres2 < 0) { -+ T(YAFFS_TRACE_ERROR, -+ (TSTR -+ ("**>>mtd ecc error unfixed on chunk %d:1" -+ TENDSTR), chunkInNAND)); -+ } -+ -+ if (nspare.eccres1 || nspare.eccres2) { -+ /* We had a data problem on this page */ -+ yaffs_HandleReadDataError(dev, chunkInNAND); -+ } -+ -+ if (nspare.eccres1 < 0 || nspare.eccres2 < 0) -+ *eccResult = YAFFS_ECC_RESULT_UNFIXED; -+ else if (nspare.eccres1 > 0 || nspare.eccres2 > 0) -+ *eccResult = YAFFS_ECC_RESULT_FIXED; -+ else -+ *eccResult = YAFFS_ECC_RESULT_NO_ERROR; -+ -+ } -+ } -+ return retVal; -+} -+ -+#ifdef NOTYET -+static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev, -+ int chunkInNAND) -+{ -+ -+ static int init = 0; -+ static __u8 cmpbuf[YAFFS_BYTES_PER_CHUNK]; -+ static __u8 data[YAFFS_BYTES_PER_CHUNK]; -+ /* Might as well always allocate the larger size for */ -+ /* dev->useNANDECC == true; */ -+ static __u8 spare[sizeof(struct yaffs_NANDSpare)]; -+ -+ dev->readChunkFromNAND(dev, chunkInNAND, data, (yaffs_Spare *) spare); -+ -+ if (!init) { -+ memset(cmpbuf, 0xff, YAFFS_BYTES_PER_CHUNK); -+ init = 1; -+ } -+ -+ if (memcmp(cmpbuf, data, YAFFS_BYTES_PER_CHUNK)) -+ return YAFFS_FAIL; -+ if (memcmp(cmpbuf, spare, 16)) -+ return YAFFS_FAIL; -+ -+ return YAFFS_OK; -+ -+} -+#endif -+ -+/* -+ * Functions for robustisizing -+ */ -+ -+static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND) -+{ -+ int blockInNAND = chunkInNAND / dev->nChunksPerBlock; -+ -+ /* Mark the block for retirement */ -+ yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1; -+ T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS, -+ (TSTR("**>>Block %d marked for retirement" TENDSTR), blockInNAND)); -+ -+ /* TODO: -+ * Just do a garbage collection on the affected block -+ * then retire the block -+ * NB recursion -+ */ -+} -+ -+#ifdef NOTYET -+static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND) -+{ -+} -+ -+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND, -+ const __u8 * data, -+ const yaffs_Spare * spare) -+{ -+} -+ -+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND, -+ const yaffs_Spare * spare) -+{ -+} -+ -+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND) -+{ -+ int blockInNAND = chunkInNAND / dev->nChunksPerBlock; -+ -+ /* Mark the block for retirement */ -+ yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1; -+ /* Delete the chunk */ -+ yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__); -+} -+ -+static int yaffs_VerifyCompare(const __u8 * d0, const __u8 * d1, -+ const yaffs_Spare * s0, const yaffs_Spare * s1) -+{ -+ -+ if (memcmp(d0, d1, YAFFS_BYTES_PER_CHUNK) != 0 || -+ s0->tagByte0 != s1->tagByte0 || -+ s0->tagByte1 != s1->tagByte1 || -+ s0->tagByte2 != s1->tagByte2 || -+ s0->tagByte3 != s1->tagByte3 || -+ s0->tagByte4 != s1->tagByte4 || -+ s0->tagByte5 != s1->tagByte5 || -+ s0->tagByte6 != s1->tagByte6 || -+ s0->tagByte7 != s1->tagByte7 || -+ s0->ecc1[0] != s1->ecc1[0] || -+ s0->ecc1[1] != s1->ecc1[1] || -+ s0->ecc1[2] != s1->ecc1[2] || -+ s0->ecc2[0] != s1->ecc2[0] || -+ s0->ecc2[1] != s1->ecc2[1] || s0->ecc2[2] != s1->ecc2[2]) { -+ return 0; -+ } -+ -+ return 1; -+} -+#endif /* NOTYET */ -+ -+int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev, -+ int chunkInNAND, -+ const __u8 * data, -+ const yaffs_ExtendedTags * -+ eTags) -+{ -+ yaffs_Spare spare; -+ yaffs_Tags tags; -+ -+ yaffs_SpareInitialise(&spare); -+ -+ if (eTags->chunkDeleted) { -+ spare.pageStatus = 0; -+ } else { -+ tags.objectId = eTags->objectId; -+ tags.chunkId = eTags->chunkId; -+ tags.byteCount = eTags->byteCount; -+ tags.serialNumber = eTags->serialNumber; -+ -+ if (!dev->useNANDECC && data) { -+ yaffs_CalcECC(data, &spare); -+ } -+ yaffs_LoadTagsIntoSpare(&spare, &tags); -+ -+ } -+ -+ return yaffs_WriteChunkToNAND(dev, chunkInNAND, data, &spare); -+} -+ -+int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev, -+ int chunkInNAND, -+ __u8 * data, -+ yaffs_ExtendedTags * eTags) -+{ -+ -+ yaffs_Spare spare; -+ yaffs_Tags tags; -+ yaffs_ECCResult eccResult; -+ -+ static yaffs_Spare spareFF; -+ static int init; -+ -+ if (!init) { -+ memset(&spareFF, 0xFF, sizeof(spareFF)); -+ init = 1; -+ } -+ -+ if (yaffs_ReadChunkFromNAND -+ (dev, chunkInNAND, data, &spare, &eccResult, 1)) { -+ /* eTags may be NULL */ -+ if (eTags) { -+ -+ int deleted = -+ (yaffs_CountBits(spare.pageStatus) < 7) ? 1 : 0; -+ -+ eTags->chunkDeleted = deleted; -+ eTags->eccResult = eccResult; -+ eTags->blockBad = 0; /* We're reading it */ -+ /* therefore it is not a bad block */ -+ eTags->chunkUsed = -+ (memcmp(&spareFF, &spare, sizeof(spareFF)) != -+ 0) ? 1 : 0; -+ -+ if (eTags->chunkUsed) { -+ yaffs_GetTagsFromSpare(dev, &spare, &tags); -+ -+ eTags->objectId = tags.objectId; -+ eTags->chunkId = tags.chunkId; -+ eTags->byteCount = tags.byteCount; -+ eTags->serialNumber = tags.serialNumber; -+ } -+ } -+ -+ return YAFFS_OK; -+ } else { -+ return YAFFS_FAIL; -+ } -+} -+ -+int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev, -+ int blockInNAND) -+{ -+ -+ yaffs_Spare spare; -+ -+ memset(&spare, 0xff, sizeof(yaffs_Spare)); -+ -+ spare.blockStatus = 'Y'; -+ -+ yaffs_WriteChunkToNAND(dev, blockInNAND * dev->nChunksPerBlock, NULL, -+ &spare); -+ yaffs_WriteChunkToNAND(dev, blockInNAND * dev->nChunksPerBlock + 1, -+ NULL, &spare); -+ -+ return YAFFS_OK; -+ -+} -+ -+int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev, -+ int blockNo, yaffs_BlockState * -+ state, -+ int *sequenceNumber) -+{ -+ -+ yaffs_Spare spare0, spare1; -+ static yaffs_Spare spareFF; -+ static int init; -+ yaffs_ECCResult dummy; -+ -+ if (!init) { -+ memset(&spareFF, 0xFF, sizeof(spareFF)); -+ init = 1; -+ } -+ -+ *sequenceNumber = 0; -+ -+ yaffs_ReadChunkFromNAND(dev, blockNo * dev->nChunksPerBlock, NULL, -+ &spare0, &dummy, 1); -+ yaffs_ReadChunkFromNAND(dev, blockNo * dev->nChunksPerBlock + 1, NULL, -+ &spare1, &dummy, 1); -+ -+ if (yaffs_CountBits(spare0.blockStatus & spare1.blockStatus) < 7) -+ *state = YAFFS_BLOCK_STATE_DEAD; -+ else if (memcmp(&spareFF, &spare0, sizeof(spareFF)) == 0) -+ *state = YAFFS_BLOCK_STATE_EMPTY; -+ else -+ *state = YAFFS_BLOCK_STATE_NEEDS_SCANNING; -+ -+ return YAFFS_OK; -+} -diff -urN linux.old/fs/yaffs2/yaffs_tagscompat.h linux.dev/fs/yaffs2/yaffs_tagscompat.h ---- linux.old/fs/yaffs2/yaffs_tagscompat.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_tagscompat.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,40 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yaffs_ramdisk.h: yaffs ram disk component -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * $Id: yaffs_tagscompat.h,v 1.2 2005/08/11 02:33:03 marty Exp $ -+ */ -+ -+/* This provides a ram disk under yaffs. -+ * NB this is not intended for NAND emulation. -+ * Use this with dev->useNANDECC enabled, then ECC overheads are not required. -+ */ -+#ifndef __YAFFS_TAGSCOMPAT_H__ -+#define __YAFFS_TAGSCOMPAT_H__ -+ -+#include "yaffs_guts.h" -+int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev, -+ int chunkInNAND, -+ const __u8 * data, -+ const yaffs_ExtendedTags * -+ tags); -+int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev, -+ int chunkInNAND, -+ __u8 * data, -+ yaffs_ExtendedTags * -+ tags); -+int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev, -+ int blockNo); -+int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev, -+ int blockNo, yaffs_BlockState * -+ state, int *sequenceNumber); -+ -+#endif -diff -urN linux.old/fs/yaffs2/yaffs_tagsvalidity.c linux.dev/fs/yaffs2/yaffs_tagsvalidity.c ---- linux.old/fs/yaffs2/yaffs_tagsvalidity.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_tagsvalidity.c 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,31 @@ -+ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * $Id: yaffs_tagsvalidity.c,v 1.2 2005/08/11 02:33:03 marty Exp $ -+ */ -+ -+#include "yaffs_tagsvalidity.h" -+ -+void yaffs_InitialiseTags(yaffs_ExtendedTags * tags) -+{ -+ memset(tags, 0, sizeof(yaffs_ExtendedTags)); -+ tags->validMarker0 = 0xAAAAAAAA; -+ tags->validMarker1 = 0x55555555; -+} -+ -+int yaffs_ValidateTags(yaffs_ExtendedTags * tags) -+{ -+ return (tags->validMarker0 == 0xAAAAAAAA && -+ tags->validMarker1 == 0x55555555); -+ -+} -diff -urN linux.old/fs/yaffs2/yaffs_tagsvalidity.h linux.dev/fs/yaffs2/yaffs_tagsvalidity.h ---- linux.old/fs/yaffs2/yaffs_tagsvalidity.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yaffs_tagsvalidity.h 2006-12-14 04:21:47.000000000 +0100 -@@ -0,0 +1,25 @@ -+ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * $Id: yaffs_tagsvalidity.h,v 1.2 2005/08/11 02:33:03 marty Exp $ -+ */ -+//yaffs_tagsvalidity.h -+ -+#ifndef __YAFFS_TAGS_VALIDITY_H__ -+#define __YAFFS_TAGS_VALIDITY_H__ -+ -+#include "yaffs_guts.h" -+ -+void yaffs_InitialiseTags(yaffs_ExtendedTags * tags); -+int yaffs_ValidateTags(yaffs_ExtendedTags * tags); -+#endif -diff -urN linux.old/fs/yaffs2/yportenv.h linux.dev/fs/yaffs2/yportenv.h ---- linux.old/fs/yaffs2/yportenv.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/fs/yaffs2/yportenv.h 2006-12-14 04:26:06.000000000 +0100 -@@ -0,0 +1,165 @@ -+/* -+ * YAFFS: Yet another FFS. A NAND-flash specific file system. -+ * yportenv.h: Portable services used by yaffs. This is done to allow -+ * simple migration from kernel space into app space for testing. -+ * -+ * Copyright (C) 2002 Aleph One Ltd. -+ * for Toby Churchill Ltd and Brightstar Engineering -+ * -+ * Created by Charles Manning -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU Lesser General Public License version 2.1 as -+ * published by the Free Software Foundation. -+ * -+ * -+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL. -+ * -+ * $Id: yportenv.h,v 1.11 2006/05/21 09:39:12 charles Exp $ -+ * -+ */ -+ -+#ifndef __YPORTENV_H__ -+#define __YPORTENV_H__ -+ -+#if defined CONFIG_YAFFS_WINCE -+ -+#include "ywinceenv.h" -+ -+#elif defined __KERNEL__ -+ -+#include "moduleconfig.h" -+ -+/* Linux kernel */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define YCHAR char -+#define YUCHAR unsigned char -+#define _Y(x) x -+#define yaffs_strcpy(a,b) strcpy(a,b) -+#define yaffs_strncpy(a,b,c) strncpy(a,b,c) -+#define yaffs_strlen(s) strlen(s) -+#define yaffs_sprintf sprintf -+#define yaffs_toupper(a) toupper(a) -+ -+#define Y_INLINE inline -+ -+#define YAFFS_LOSTNFOUND_NAME "lost+found" -+#define YAFFS_LOSTNFOUND_PREFIX "obj" -+ -+/* #define YPRINTF(x) printk x */ -+#define YMALLOC(x) kmalloc(x,GFP_KERNEL) -+#define YFREE(x) kfree(x) -+#define YMALLOC_ALT(x) vmalloc(x) -+#define YFREE_ALT(x) vfree(x) -+#define YMALLOC_DMA(x) YMALLOC(x) -+ -+// KR - added for use in scan so processes aren't blocked indefinitely. -+#define YYIELD() schedule() -+ -+#define YAFFS_ROOT_MODE 0666 -+#define YAFFS_LOSTNFOUND_MODE 0666 -+ -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) -+#define Y_CURRENT_TIME CURRENT_TIME.tv_sec -+#define Y_TIME_CONVERT(x) (x).tv_sec -+#else -+#define Y_CURRENT_TIME CURRENT_TIME -+#define Y_TIME_CONVERT(x) (x) -+#endif -+ -+#define yaffs_SumCompare(x,y) ((x) == (y)) -+#define yaffs_strcmp(a,b) strcmp(a,b) -+ -+#define TENDSTR "\n" -+#define TSTR(x) KERN_WARNING x -+#define TOUT(p) printk p -+ -+#elif defined CONFIG_YAFFS_DIRECT -+ -+/* Direct interface */ -+#include "ydirectenv.h" -+ -+#elif defined CONFIG_YAFFS_UTIL -+ -+/* Stuff for YAFFS utilities */ -+ -+#include "stdlib.h" -+#include "stdio.h" -+#include "string.h" -+ -+#include "devextras.h" -+ -+#define YMALLOC(x) malloc(x) -+#define YFREE(x) free(x) -+#define YMALLOC_ALT(x) malloc(x) -+#define YFREE_ALT(x) free(x) -+ -+#define YCHAR char -+#define YUCHAR unsigned char -+#define _Y(x) x -+#define yaffs_strcpy(a,b) strcpy(a,b) -+#define yaffs_strncpy(a,b,c) strncpy(a,b,c) -+#define yaffs_strlen(s) strlen(s) -+#define yaffs_sprintf sprintf -+#define yaffs_toupper(a) toupper(a) -+ -+#define Y_INLINE inline -+ -+/* #define YINFO(s) YPRINTF(( __FILE__ " %d %s\n",__LINE__,s)) */ -+/* #define YALERT(s) YINFO(s) */ -+ -+#define TENDSTR "\n" -+#define TSTR(x) x -+#define TOUT(p) printf p -+ -+#define YAFFS_LOSTNFOUND_NAME "lost+found" -+#define YAFFS_LOSTNFOUND_PREFIX "obj" -+/* #define YPRINTF(x) printf x */ -+ -+#define YAFFS_ROOT_MODE 0666 -+#define YAFFS_LOSTNFOUND_MODE 0666 -+ -+#define yaffs_SumCompare(x,y) ((x) == (y)) -+#define yaffs_strcmp(a,b) strcmp(a,b) -+ -+#else -+/* Should have specified a configuration type */ -+#error Unknown configuration -+ -+#endif -+ -+extern unsigned yaffs_traceMask; -+ -+#define YAFFS_TRACE_ERROR 0x00000001 -+#define YAFFS_TRACE_OS 0x00000002 -+#define YAFFS_TRACE_ALLOCATE 0x00000004 -+#define YAFFS_TRACE_SCAN 0x00000008 -+#define YAFFS_TRACE_BAD_BLOCKS 0x00000010 -+#define YAFFS_TRACE_ERASE 0x00000020 -+#define YAFFS_TRACE_GC 0x00000040 -+#define YAFFS_TRACE_WRITE 0x00000080 -+#define YAFFS_TRACE_TRACING 0x00000100 -+#define YAFFS_TRACE_DELETION 0x00000200 -+#define YAFFS_TRACE_BUFFERS 0x00000400 -+#define YAFFS_TRACE_NANDACCESS 0x00000800 -+#define YAFFS_TRACE_GC_DETAIL 0x00001000 -+#define YAFFS_TRACE_SCAN_DEBUG 0x00002000 -+#define YAFFS_TRACE_MTD 0x00004000 -+#define YAFFS_TRACE_CHECKPOINT 0x00008000 -+#define YAFFS_TRACE_ALWAYS 0x40000000 -+#define YAFFS_TRACE_BUG 0x80000000 -+ -+#define T(mask,p) do{ if((mask) & (yaffs_traceMask | YAFFS_TRACE_ERROR)) TOUT(p);} while(0) -+ -+#ifndef CONFIG_YAFFS_WINCE -+#define YBUG() T(YAFFS_TRACE_BUG,(TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR),__LINE__)) -+#endif -+ -+#endif diff --git a/target/linux/etrax/patches/generic_2.6/700-airprime.patch b/target/linux/etrax/patches/generic_2.6/700-airprime.patch deleted file mode 100644 index 5eafe1da27..0000000000 --- a/target/linux/etrax/patches/generic_2.6/700-airprime.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -urN linux-2.6.19.2-old/drivers/usb/serial/airprime.c linux-2.6.19.2-dev/drivers/usb/serial/airprime.c ---- linux-2.6.19.2-old/drivers/usb/serial/airprime.c 2007-05-01 14:11:28.000000000 -0700 -+++ linux-2.6.19.2-dev/drivers/usb/serial/airprime.c 2007-05-01 14:12:03.000000000 -0700 -@@ -20,6 +20,8 @@ - { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ - { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */ - { USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */ -+ { USB_DEVICE(0x1410, 0x1130) }, /* Novatel Wireless S720 CDMA/EV-DO */ -+ { USB_DEVICE(0x1410, 0x2110) }, /* Novatel Wireless U720 CDMA/EV-DO */ - { }, - }; - MODULE_DEVICE_TABLE(usb, id_table); diff --git a/target/linux/etrax/patches/generic_2.6/900-headers_type_and_time.patch b/target/linux/etrax/patches/generic_2.6/900-headers_type_and_time.patch deleted file mode 100644 index 2ed6f39e6b..0000000000 --- a/target/linux/etrax/patches/generic_2.6/900-headers_type_and_time.patch +++ /dev/null @@ -1,48 +0,0 @@ -diff -urN linux-2.6.19.old/include/linux/time.h linux-2.6.19.dev/include/linux/time.h ---- linux-2.6.19.old/include/linux/time.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/time.h 2006-12-14 03:14:05.000000000 +0100 -@@ -1,6 +1,10 @@ - #ifndef _LINUX_TIME_H - #define _LINUX_TIME_H - -+#ifndef __KERNEL__ -+#include -+#else -+ - #include - - #ifdef __KERNEL__ -@@ -223,4 +227,6 @@ - */ - #define TIMER_ABSTIME 0x01 - -+#endif /* __KERNEL__ DEBIAN */ -+ - #endif -diff -urN linux-2.6.19.old/include/linux/types.h linux-2.6.19.dev/include/linux/types.h ---- linux-2.6.19.old/include/linux/types.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/linux/types.h 2006-12-14 03:14:05.000000000 +0100 -@@ -1,6 +1,14 @@ - #ifndef _LINUX_TYPES_H - #define _LINUX_TYPES_H - -+/* Debian: Use userland types instead. */ -+#ifndef __KERNEL__ -+# include -+/* For other kernel headers. */ -+# include -+# include -+#else -+ - #ifdef __KERNEL__ - - #define BITS_TO_LONGS(bits) \ -@@ -156,6 +164,8 @@ - - #endif /* __KERNEL_STRICT_NAMES */ - -+#endif /* __KERNEL__ DEBIAN */ -+ - /* - * Below are truly Linux-specific types that should never collide with - * any application/library that wants linux/types.h. diff --git a/target/linux/etrax/patches/generic_2.6/901-asm_bitops_include.patch b/target/linux/etrax/patches/generic_2.6/901-asm_bitops_include.patch deleted file mode 100644 index ec18e9b102..0000000000 --- a/target/linux/etrax/patches/generic_2.6/901-asm_bitops_include.patch +++ /dev/null @@ -1,11 +0,0 @@ -diff -urN linux-2.6.19.old/include/asm-mips/bitops.h linux-2.6.19.dev/include/asm-mips/bitops.h ---- linux-2.6.19.old/include/asm-mips/bitops.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.dev/include/asm-mips/bitops.h 2006-12-14 03:14:07.000000000 +0100 -@@ -11,6 +11,7 @@ - - #include - #include -+#include - #include - #include /* sigh ... */ - #include diff --git a/target/linux/etrax/patches/generic_2.6/902-darwin_scripts_include.patch b/target/linux/etrax/patches/generic_2.6/902-darwin_scripts_include.patch deleted file mode 100644 index f5f187e9b7..0000000000 --- a/target/linux/etrax/patches/generic_2.6/902-darwin_scripts_include.patch +++ /dev/null @@ -1,145 +0,0 @@ -diff -urN linux-2.6.19.1/scripts/mod/file2alias.c linux-2.6.19.1.new/scripts/mod/file2alias.c ---- linux-2.6.19.1/scripts/mod/file2alias.c 2006-12-11 20:32:53.000000000 +0100 -+++ linux-2.6.19.1.new/scripts/mod/file2alias.c 2007-01-02 15:28:47.000000000 +0100 -@@ -37,7 +37,21 @@ - * even potentially has different endianness and word sizes, since - * we handle those differences explicitly below */ - #include "../../include/linux/mod_devicetable.h" -+#ifndef __APPLE__ - #include "../../include/linux/input.h" -+#else -+#define EV_MAX 0x1f -+#define KEY_MUTE 113 -+#define KEY_MIN_INTERESTING KEY_MUTE -+#define KEY_MAX 0x1ff -+#define REL_MAX 0x0f -+#define ABS_MAX 0x3f -+#define MSC_MAX 0x07 -+#define LED_MAX 0x0f -+#define SND_MAX 0x07 -+#define FF_MAX 0x7f -+#define SW_MAX 0x0f -+#endif - - #define ADD(str, sep, cond, field) \ - do { \ -diff -urN linux-2.6.19.1/scripts/mod/mk_elfconfig.c linux-2.6.19.1.new/scripts/mod/mk_elfconfig.c ---- linux-2.6.19.1/scripts/mod/mk_elfconfig.c 2006-12-11 20:32:53.000000000 +0100 -+++ linux-2.6.19.1.new/scripts/mod/mk_elfconfig.c 2007-01-02 15:43:57.000000000 +0100 -@@ -1,7 +1,11 @@ - #include - #include - #include -+#ifndef __APPLE__ - #include -+#else -+#include "../../../../../tools/sstrip/include/elf.h" -+#endif - - int - main(int argc, char **argv) -diff -urN linux-2.6.19.1/scripts/mod/modpost.h linux-2.6.19.1.new/scripts/mod/modpost.h ---- linux-2.6.19.1/scripts/mod/modpost.h 2006-12-11 20:32:53.000000000 +0100 -+++ linux-2.6.19.1.new/scripts/mod/modpost.h 2007-01-02 15:40:55.000000000 +0100 -@@ -7,7 +7,11 @@ - #include - #include - #include -+#ifndef __APPLE__ - #include -+#else -+#include "../../../../../tools/sstrip/include/elf.h" -+#endif - - #include "elfconfig.h" - -diff -urN linux-2.6.19.1/scripts/mod/sumversion.c linux-2.6.19.1.new/scripts/mod/sumversion.c ---- linux-2.6.19.1/scripts/mod/sumversion.c 2006-12-11 20:32:53.000000000 +0100 -+++ linux-2.6.19.1.new/scripts/mod/sumversion.c 2007-01-02 15:30:23.000000000 +0100 -@@ -8,6 +8,9 @@ - #include - #include - #include "modpost.h" -+#ifdef __APPLE__ -+#include -+#endif - - /* - * Stolen form Cryptographic API. -diff -urN linux-2.6.19.1/scripts/kconfig linux-2.6.19.1.new/scripts/kconfig/Makefile ---- linux-2.6.19.1/scripts/kconfig/Makefile 2007-01-04 17:49:35.000000000 +0100 -+++ linux-2.6.19.1.new/scripts/kconfig/Makefile 2007-01-04 17:50:37.000000000 +0100 -@@ -87,6 +87,9 @@ - # we really need to do so. (Do not call gcc as part of make mrproper) - HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) - HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) -+ifeq ($(shell uname -s),Darwin) -+HOST_LOADLIBES += -lncurses -+endif - - HOST_EXTRACFLAGS += -DLOCALE - -diff -urN linux-2.6.19.1/scripts/genksyms/parse.y linux-2.6.19.1.new/scripts/genksyms/parse.y ---- linux-2.6.19.1/scripts/genksyms/parse.y 2006-12-11 20:32:53.000000000 +0100 -+++ linux-2.6.19.1.new/scripts/genksyms/parse.y 2007-01-04 19:20:55.000000000 +0100 -@@ -24,7 +24,9 @@ - %{ - - #include -+#ifndef __APPLE__ - #include -+#endif - #include "genksyms.h" - - static int is_typedef; -diff -urN linux-2.6.19.1/scripts/genksyms/parse.c_shipped linux-2.6.19.1.new/scripts/genksyms/parse.c_shipped ---- linux-2.6.19.1/scripts/genksyms/parse.c_shipped 2007-01-04 19:34:09.000000000 +0100 -+++ linux-2.6.19.1.new/scripts/genksyms/parse.c_shipped 2007-01-04 19:34:02.000000000 +0100 -@@ -144,7 +144,9 @@ - - - #include -+#ifndef __APPLE__ - #include -+#endif - #include "genksyms.h" - - static int is_typedef; ---- linux-2.6.19.1/scripts/kallsyms.c 2006-12-11 20:32:53.000000000 +0100 -+++ linux-2.6.19.1.new/scripts/kallsyms.c 2007-01-04 19:46:38.000000000 +0100 -@@ -30,6 +30,35 @@ - #include - #include - #include -+#ifdef __APPLE__ -+/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */ -+void *memmem (const void *haystack, size_t haystack_len, -+ const void *needle, size_t needle_len) -+{ -+ const char *begin; -+ const char *const last_possible -+ = (const char *) haystack + haystack_len - needle_len; -+ -+ if (needle_len == 0) -+ /* The first occurrence of the empty string is deemed to occur at -+ the beginning of the string. */ -+ return (void *) haystack; -+ -+ /* Sanity check, otherwise the loop might search through the whole -+ memory. */ -+ if (__builtin_expect (haystack_len < needle_len, 0)) -+ return NULL; -+ -+ for (begin = (const char *) haystack; begin <= last_possible; ++begin) -+ if (begin[0] == ((const char *) needle)[0] && -+ !memcmp ((const void *) &begin[1], -+ (const void *) ((const char *) needle + 1), -+ needle_len - 1)) -+ return (void *) begin; -+ -+ return NULL; -+} -+#endif - - #define KSYM_NAME_LEN 127 - diff --git a/target/linux/etrax/patches/generic_2.6/903-stddef_include.patch b/target/linux/etrax/patches/generic_2.6/903-stddef_include.patch deleted file mode 100644 index 6ce8558c34..0000000000 --- a/target/linux/etrax/patches/generic_2.6/903-stddef_include.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- linux-2.6.19.2/include/linux/stddef.h.old 2007-02-14 03:34:54.861805424 +0100 -+++ linux-2.6.19.2/include/linux/stddef.h 2007-02-14 03:35:06.331061832 +0100 -@@ -16,6 +16,7 @@ - false = 0, - true = 1 - }; -+#endif /* __KERNEL__ */ - - #undef offsetof - #ifdef __compiler_offsetof -@@ -23,6 +24,5 @@ - #else - #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) - #endif --#endif /* __KERNEL__ */ - - #endif diff --git a/target/linux/etrax/patches/generic_2.6/904-ls_time_locale.patch b/target/linux/etrax/patches/generic_2.6/904-ls_time_locale.patch deleted file mode 100644 index cc4a392b8f..0000000000 --- a/target/linux/etrax/patches/generic_2.6/904-ls_time_locale.patch +++ /dev/null @@ -1,24 +0,0 @@ -diff -urN linux-2.6.19.2/scripts/gen_initramfs_list.sh linux-2.6.19.2.new/scripts/gen_initramfs_list.sh ---- linux-2.6.19.2/scripts/gen_initramfs_list.sh 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/scripts/gen_initramfs_list.sh 2007-05-03 16:25:06.000000000 +0200 -@@ -120,9 +120,9 @@ - ;; - "nod") - local dev_type= -- local maj=$(LC_ALL=C ls -l "${location}" | \ -+ local maj=$(LC_ALL=C ls --time-style=locale -l "${location}" | \ - gawk '{sub(/,/, "", $5); print $5}') -- local min=$(LC_ALL=C ls -l "${location}" | \ -+ local min=$(LC_ALL=C ls --time-style=locale -l "${location}" | \ - gawk '{print $6}') - - if [ -b "${location}" ]; then -@@ -133,7 +133,7 @@ - str="${ftype} ${name} ${str} ${dev_type} ${maj} ${min}" - ;; - "slink") -- local target=$(LC_ALL=C ls -l "${location}" | \ -+ local target=$(LC_ALL=C ls --time-style=locale -l "${location}" | \ - gawk '{print $11}') - str="${ftype} ${name} ${target} ${str}" - ;; diff --git a/target/linux/etrax/patches/generic_2.6/905-zydas-zyxel.patch b/target/linux/etrax/patches/generic_2.6/905-zydas-zyxel.patch deleted file mode 100644 index 395a87af68..0000000000 --- a/target/linux/etrax/patches/generic_2.6/905-zydas-zyxel.patch +++ /dev/null @@ -1,18 +0,0 @@ -diff -urN linux-2.6.19.2.orig/drivers/net/wireless/zd1211rw/zd_usb.c linux-2.6.19.2/drivers/net/wireless/zd1211rw/zd_usb.c ---- linux-2.6.19.2.orig/drivers/net/wireless/zd1211rw/zd_usb.c 2007-06-13 23:14:44.000000000 +0200 -+++ linux-2.6.19.2/drivers/net/wireless/zd1211rw/zd_usb.c 2007-06-13 23:19:51.000000000 +0200 -@@ -47,11 +47,13 @@ - { USB_DEVICE(0x0586, 0x3402), .driver_info = DEVICE_ZD1211 }, - { USB_DEVICE(0x0b3b, 0x5630), .driver_info = DEVICE_ZD1211 }, - { USB_DEVICE(0x0b05, 0x170c), .driver_info = DEVICE_ZD1211 }, -+ { USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 }, - /* ZD1211B */ - { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, - { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, - { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B }, - { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B }, -+ - /* "Driverless" devices that need ejecting */ - { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, - {} -Binary files linux-2.6.19.2.orig/drivers/net/wireless/zd1211rw/.zd_usb.c.swp and linux-2.6.19.2/drivers/net/wireless/zd1211rw/.zd_usb.c.swp differ