From: Sander Vanheule Date: Sun, 20 Feb 2022 16:17:18 +0000 (+0100) Subject: realtek: remove debugging code from timer X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=66d8db01cc04f18ccfa63d2e49ed281a6fe66c3c;p=openwrt%2Fstaging%2Frobimarko.git realtek: remove debugging code from timer Remove some (dead) debugging code from the Realtek timer to clean up the sources of this driver. Signed-off-by: Sander Vanheule --- diff --git a/target/linux/realtek/files-5.10/arch/mips/kernel/cevt-rtl9300.c b/target/linux/realtek/files-5.10/arch/mips/kernel/cevt-rtl9300.c index cbbea7d686..1c8c30de5d 100644 --- a/target/linux/realtek/files-5.10/arch/mips/kernel/cevt-rtl9300.c +++ b/target/linux/realtek/files-5.10/arch/mips/kernel/cevt-rtl9300.c @@ -51,18 +51,12 @@ static irqreturn_t rtl9300_timer_interrupt(int irq, void *dev_id) { struct rtl9300_clk_dev *rtl_clk = dev_id; struct clock_event_device *clk = &rtl_clk->clkdev; -// int cpu = smp_processor_id(); - static atomic_t count = ATOMIC_INIT(0); - unsigned int c; - u32 v = readl(rtl_clk->base + RTL9300_TC_INT); - c = (unsigned int)atomic_inc_return(&count); + u32 v = readl(rtl_clk->base + RTL9300_TC_INT); // Acknowledge the IRQ v |= RTL9300_TC_INT_IP; writel(v, rtl_clk->base + RTL9300_TC_INT); - if (readl(rtl_clk->base + RTL9300_TC_INT) & RTL9300_TC_INT_IP) - dump_stack(); clk->event_handler(clk); return IRQ_HANDLED; @@ -76,10 +70,7 @@ static void rtl9300_clock_stop(void __iomem *base) // Acknowledge possibly pending IRQ v = readl(base + RTL9300_TC_INT); -// if (v & RTL9300_TC_INT_IP) - writel(v | RTL9300_TC_INT_IP, base + RTL9300_TC_INT); - if (readl(base + RTL9300_TC_INT) & RTL9300_TC_INT_IP) - dump_stack(); + writel(v | RTL9300_TC_INT_IP, base + RTL9300_TC_INT); } static void rtl9300_timer_start(void __iomem *base, bool periodic) @@ -142,10 +133,7 @@ static void rtl9300_clock_setup(void __iomem *base) // Acknowledge possibly pending IRQ v = readl(base + RTL9300_TC_INT); -// if (v & RTL9300_TC_INT_IP) - writel(v | RTL9300_TC_INT_IP, base + RTL9300_TC_INT); - if (readl(base + RTL9300_TC_INT) & RTL9300_TC_INT_IP) - dump_stack(); + writel(v | RTL9300_TC_INT_IP, base + RTL9300_TC_INT); // Setup maximum period (for use as clock-source) writel(0x0fffffff, base + RTL9300_TC_DATA);