From: Rafał Miłecki Date: Thu, 1 Mar 2018 17:15:43 +0000 (+0100) Subject: mac80211: brcmfmac: restructuring sdio access functions - take 2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=66bdf62a2ad2a6c2d339a6949b647301994e629d;p=openwrt%2Fstaging%2Fnbd.git mac80211: brcmfmac: restructuring sdio access functions - take 2 Signed-off-by: Rafał Miłecki --- diff --git a/package/kernel/mac80211/patches/312-v4.16-0001-brcmfmac-Split-brcmf_sdiod_buffrw-function-up.patch b/package/kernel/mac80211/patches/312-v4.16-0001-brcmfmac-Split-brcmf_sdiod_buffrw-function-up.patch new file mode 100644 index 0000000000..c260b96550 --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0001-brcmfmac-Split-brcmf_sdiod_buffrw-function-up.patch @@ -0,0 +1,143 @@ +From 8f13c87ccc495e30de5f58bbda967f6edd5bec53 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:26 +0100 +Subject: [PATCH] brcmfmac: Split brcmf_sdiod_buffrw function up. + +This function needs to be split up into separate read / write variants +for clarity. + +Signed-off-by: Ian Molton +Reviewed-by: Arend van Spriel +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 67 +++++++++++++++------- + 1 file changed, 45 insertions(+), 22 deletions(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +@@ -414,8 +414,8 @@ void brcmf_sdiod_regwl(struct brcmf_sdio + *ret = retval; + } + +-static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn, +- bool write, u32 addr, struct sk_buff *pkt) ++static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn, ++ u32 addr, struct sk_buff *pkt) + { + unsigned int req_sz; + int err; +@@ -424,18 +424,36 @@ static int brcmf_sdiod_buffrw(struct brc + req_sz = pkt->len + 3; + req_sz &= (uint)~3; + +- if (write) +- err = sdio_memcpy_toio(sdiodev->func[fn], addr, +- ((u8 *)(pkt->data)), req_sz); +- else if (fn == 1) +- err = sdio_memcpy_fromio(sdiodev->func[fn], ((u8 *)(pkt->data)), +- addr, req_sz); ++ if (fn == 1) ++ err = sdio_memcpy_fromio(sdiodev->func[fn], ++ ((u8 *)(pkt->data)), addr, req_sz); + else + /* function 2 read is FIFO operation */ +- err = sdio_readsb(sdiodev->func[fn], ((u8 *)(pkt->data)), addr, +- req_sz); ++ err = sdio_readsb(sdiodev->func[fn], ++ ((u8 *)(pkt->data)), addr, req_sz); ++ ++ if (err == -ENOMEDIUM) ++ brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM); ++ ++ return err; ++} ++ ++static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn, ++ u32 addr, struct sk_buff *pkt) ++{ ++ unsigned int req_sz; ++ int err; ++ ++ /* Single skb use the standard mmc interface */ ++ req_sz = pkt->len + 3; ++ req_sz &= (uint)~3; ++ ++ err = sdio_memcpy_toio(sdiodev->func[fn], addr, ++ ((u8 *)(pkt->data)), req_sz); ++ + if (err == -ENOMEDIUM) + brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM); ++ + return err; + } + +@@ -643,7 +661,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sd + if (err) + goto done; + +- err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, pkt); ++ err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, pkt); + + done: + return err; +@@ -665,14 +683,14 @@ int brcmf_sdiod_recv_chain(struct brcmf_ + goto done; + + if (pktq->qlen == 1) +- err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, +- pktq->next); ++ err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, ++ pktq->next); + else if (!sdiodev->sg_support) { + glom_skb = brcmu_pkt_buf_get_skb(totlen); + if (!glom_skb) + return -ENOMEM; +- err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, +- glom_skb); ++ err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, ++ glom_skb); + if (err) + goto done; + +@@ -707,8 +725,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sd + err = brcmf_sdiod_addrprep(sdiodev, &addr); + + if (!err) +- err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, addr, +- mypkt); ++ err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt); + + brcmu_pkt_buf_free_skb(mypkt); + return err; +@@ -730,8 +747,8 @@ int brcmf_sdiod_send_pkt(struct brcmf_sd + + if (pktq->qlen == 1 || !sdiodev->sg_support) + skb_queue_walk(pktq, skb) { +- err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, +- addr, skb); ++ err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, ++ addr, skb); + if (err) + break; + } +@@ -783,10 +800,16 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev + sdaddr |= SBSDIO_SB_ACCESS_2_4B_FLAG; + + skb_put(pkt, dsize); +- if (write) ++ ++ if (write) { + memcpy(pkt->data, data, dsize); +- err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_1, write, sdaddr, +- pkt); ++ err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_1, ++ sdaddr, pkt); ++ } else { ++ err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_1, ++ sdaddr, pkt); ++ } ++ + if (err) { + brcmf_err("membytes transfer failed\n"); + break; diff --git a/package/kernel/mac80211/patches/312-v4.16-0002-brcmfmac-whitespace-fixes-in-brcmf_sdiod_send_buf.patch b/package/kernel/mac80211/patches/312-v4.16-0002-brcmfmac-whitespace-fixes-in-brcmf_sdiod_send_buf.patch new file mode 100644 index 0000000000..088a6169fd --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0002-brcmfmac-whitespace-fixes-in-brcmf_sdiod_send_buf.patch @@ -0,0 +1,34 @@ +From 6e24dd012bfda479d0046f7995058f167e1923bc Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:27 +0100 +Subject: [PATCH] brcmfmac: whitespace fixes in brcmf_sdiod_send_buf() + +Signed-off-by: Ian Molton +Reviewed-by: Arend van Spriel +[arend: mention function in patch subject] +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +@@ -714,6 +714,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sd + int err; + + mypkt = brcmu_pkt_buf_get_skb(nbytes); ++ + if (!mypkt) { + brcmf_err("brcmu_pkt_buf_get_skb failed: len %d\n", + nbytes); +@@ -728,8 +729,8 @@ int brcmf_sdiod_send_buf(struct brcmf_sd + err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt); + + brcmu_pkt_buf_free_skb(mypkt); +- return err; + ++ return err; + } + + int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, diff --git a/package/kernel/mac80211/patches/312-v4.16-0003-brcmfmac-Clarify-if-using-braces.patch b/package/kernel/mac80211/patches/312-v4.16-0003-brcmfmac-Clarify-if-using-braces.patch new file mode 100644 index 0000000000..a44155b61a --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0003-brcmfmac-Clarify-if-using-braces.patch @@ -0,0 +1,36 @@ +From a7323378dcf1f10a98f47b744e6f65e6fd671d84 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:28 +0100 +Subject: [PATCH] brcmfmac: Clarify if using braces. + +Whilst this if () statement is technically correct, it lacks clarity. + +Signed-off-by: Ian Molton +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +@@ -746,16 +746,17 @@ int brcmf_sdiod_send_pkt(struct brcmf_sd + if (err) + return err; + +- if (pktq->qlen == 1 || !sdiodev->sg_support) ++ if (pktq->qlen == 1 || !sdiodev->sg_support) { + skb_queue_walk(pktq, skb) { + err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, + addr, skb); + if (err) + break; + } +- else ++ } else { + err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr, + pktq); ++ } + + return err; + } diff --git a/package/kernel/mac80211/patches/312-v4.16-0004-brcmfmac-Rename-replace-old-IO-functions-with-simple.patch b/package/kernel/mac80211/patches/312-v4.16-0004-brcmfmac-Rename-replace-old-IO-functions-with-simple.patch new file mode 100644 index 0000000000..7aa3de929f --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0004-brcmfmac-Rename-replace-old-IO-functions-with-simple.patch @@ -0,0 +1,831 @@ +From 71bd508d7ded8c504ef05d1b4befecfe25e54cb1 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:29 +0100 +Subject: [PATCH] brcmfmac: Rename / replace old IO functions with simpler + ones. + +Primarily this patch removes: + +brcmf_sdiod_f0_writeb() +brcmf_sdiod_reg_write() +brcmf_sdiod_reg_read() + +Since we no longer use the quirky method of deciding which function to +address via the address being accessed, take the opportunity to rename +some IO functions more in line with common kernel code. We also convert +those that map directly to sdio_{read,write}*() to macros. + +Signed-off-by: Ian Molton +Reviewed-by: Arend van Spriel +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 169 +++---------------- + .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 186 ++++++++++----------- + .../wireless/broadcom/brcm80211/brcmfmac/sdio.h | 28 +++- + 3 files changed, 138 insertions(+), 245 deletions(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +@@ -137,27 +137,27 @@ int brcmf_sdiod_intr_register(struct brc + if (sdiodev->bus_if->chip == BRCM_CC_43362_CHIP_ID) { + /* assign GPIO to SDIO core */ + addr = CORE_CC_REG(SI_ENUM_BASE, gpiocontrol); +- gpiocontrol = brcmf_sdiod_regrl(sdiodev, addr, &ret); ++ gpiocontrol = brcmf_sdiod_readl(sdiodev, addr, &ret); + gpiocontrol |= 0x2; +- brcmf_sdiod_regwl(sdiodev, addr, gpiocontrol, &ret); ++ brcmf_sdiod_writel(sdiodev, addr, gpiocontrol, &ret); + +- brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_SELECT, 0xf, +- &ret); +- brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret); +- brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_SELECT, ++ 0xf, &ret); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret); + } + + /* must configure SDIO_CCCR_IENx to enable irq */ +- data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret); ++ data = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_IENx, &ret); + data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; +- brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); ++ brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret); + + /* redirect, configure and enable io for interrupt signal */ + data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; + if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH) + data |= SDIO_SEPINT_ACT_HI; +- brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); +- ++ brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, ++ data, &ret); + sdio_release_host(sdiodev->func[1]); + } else { + brcmf_dbg(SDIO, "Entering\n"); +@@ -183,8 +183,8 @@ void brcmf_sdiod_intr_unregister(struct + + pdata = &sdiodev->settings->bus.sdio; + sdio_claim_host(sdiodev->func[1]); +- brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); +- brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); ++ brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); ++ brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, 0, NULL); + sdio_release_host(sdiodev->func[1]); + + sdiodev->oob_irq_requested = false; +@@ -242,8 +242,8 @@ static int brcmf_sdiod_set_sbaddr_window + addr = (address & SBSDIO_SBWINDOW_MASK) >> 8; + + for (i = 0 ; i < 3 && !err ; i++, addr >>= 8) +- brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i, +- addr & 0xff, &err); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i, ++ addr & 0xff, &err); + + return err; + } +@@ -267,124 +267,15 @@ static int brcmf_sdiod_addrprep(struct b + return 0; + } + +-static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, u8 byte, +- uint regaddr) +-{ +- int err_ret; +- +- /* +- * Can only directly write to some F0 registers. +- * Handle CCCR_IENx and CCCR_ABORT command +- * as a special case. +- */ +- if ((regaddr == SDIO_CCCR_ABORT) || +- (regaddr == SDIO_CCCR_IENx)) +- sdio_writeb(func, byte, regaddr, &err_ret); +- else +- sdio_f0_writeb(func, byte, regaddr, &err_ret); +- +- return err_ret; +-} +- +-static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, +- u8 regsz, void *data) +-{ +- int ret; +- +- /* +- * figure out how to read the register based on address range +- * 0x00 ~ 0x7FF: function 0 CCCR and FBR +- * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers +- * The rest: function 1 silicon backplane core registers +- * f0 writes must be bytewise +- */ +- +- if ((addr & ~REG_F0_REG_MASK) == 0) { +- if (WARN_ON(regsz > 1)) +- return -EINVAL; +- ret = brcmf_sdiod_f0_writeb(sdiodev->func[0], +- *(u8 *)data, addr); +- } else { +- switch (regsz) { +- case 1: +- sdio_writeb(sdiodev->func[1], *(u8 *)data, addr, &ret); +- break; +- case 4: +- ret = brcmf_sdiod_addrprep(sdiodev, &addr); +- if (ret) +- goto done; +- +- sdio_writel(sdiodev->func[1], *(u32 *)data, addr, &ret); +- break; +- default: +- WARN(1, "Invalid reg size\n"); +- ret = -EINVAL; +- break; +- } +- } +- +-done: +- return ret; +-} +- +-static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, +- u8 regsz, void *data) +-{ +- int ret; +- +- /* +- * figure out how to read the register based on address range +- * 0x00 ~ 0x7FF: function 0 CCCR and FBR +- * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers +- * The rest: function 1 silicon backplane core registers +- * f0 reads must be bytewise +- */ +- if ((addr & ~REG_F0_REG_MASK) == 0) { +- if (WARN_ON(regsz > 1)) +- return -EINVAL; +- *(u8 *)data = sdio_f0_readb(sdiodev->func[0], addr, &ret); +- } else { +- switch (regsz) { +- case 1: +- *(u8 *)data = sdio_readb(sdiodev->func[1], addr, &ret); +- break; +- case 4: +- ret = brcmf_sdiod_addrprep(sdiodev, &addr); +- if (ret) +- goto done; +- +- *(u32 *)data = sdio_readl(sdiodev->func[1], addr, &ret); +- break; +- default: +- WARN(1, "Invalid reg size\n"); +- ret = -EINVAL; +- break; +- } +- } +- +-done: +- return ret; +-} +- +-u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) ++u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) + { +- u8 data; ++ u32 data = 0; + int retval; + +- retval = brcmf_sdiod_reg_read(sdiodev, addr, 1, &data); ++ retval = brcmf_sdiod_addrprep(sdiodev, &addr); + +- if (ret) +- *ret = retval; +- +- return data; +-} +- +-u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) +-{ +- u32 data; +- int retval; +- +- retval = brcmf_sdiod_reg_read(sdiodev, addr, 4, &data); ++ if (!retval) ++ data = sdio_readl(sdiodev->func[1], addr, &retval); + + if (ret) + *ret = retval; +@@ -392,23 +283,15 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_ + return data; + } + +-void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, +- u8 data, int *ret) ++void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, ++ u32 data, int *ret) + { + int retval; + +- retval = brcmf_sdiod_reg_write(sdiodev, addr, 1, &data); +- +- if (ret) +- *ret = retval; +-} +- +-void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, +- u32 data, int *ret) +-{ +- int retval; ++ retval = brcmf_sdiod_addrprep(sdiodev, &addr); + +- retval = brcmf_sdiod_reg_write(sdiodev, addr, 4, &data); ++ if (!retval) ++ sdio_writel(sdiodev->func[1], data, addr, &retval); + + if (ret) + *ret = retval; +@@ -846,8 +729,8 @@ int brcmf_sdiod_abort(struct brcmf_sdio_ + { + brcmf_dbg(SDIO, "Enter\n"); + +- /* issue abort cmd52 command through F0 */ +- brcmf_sdiod_reg_write(sdiodev, SDIO_CCCR_ABORT, 1, &fn); ++ /* Issue abort cmd52 command through F0 */ ++ brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, fn, NULL); + + brcmf_dbg(SDIO, "Exit\n"); + return 0; +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +@@ -669,7 +669,7 @@ static int r_sdreg32(struct brcmf_sdio * + int ret; + + core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); +- *regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret); ++ *regvar = brcmf_sdiod_readl(bus->sdiodev, core->base + offset, &ret); + + return ret; + } +@@ -680,7 +680,7 @@ static int w_sdreg32(struct brcmf_sdio * + int ret; + + core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); +- brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret); ++ brcmf_sdiod_writel(bus->sdiodev, core->base + reg_offset, regval, &ret); + + return ret; + } +@@ -697,8 +697,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio + + wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); + /* 1st KSO write goes to AOS wake up core if device is asleep */ +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, +- wr_val, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); + + if (on) { + /* device WAKEUP through KSO: +@@ -724,7 +723,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio + * just one write attempt may fail, + * read it back until it matches written value + */ +- rd_val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, ++ rd_val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + &err); + if (!err) { + if ((rd_val & bmask) == cmp_val) +@@ -734,9 +733,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio + /* bail out upon subsequent access errors */ + if (err && (err_cnt++ > BRCMF_SDIO_MAX_ACCESS_ERRORS)) + break; ++ + udelay(KSO_WAIT_US); +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, +- wr_val, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, ++ &err); ++ + } while (try_cnt++ < MAX_KSO_ATTEMPTS); + + if (try_cnt > 2) +@@ -772,15 +773,15 @@ static int brcmf_sdio_htclk(struct brcmf + clkreq = + bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ; + +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, +- clkreq, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ clkreq, &err); + if (err) { + brcmf_err("HT Avail request error: %d\n", err); + return -EBADE; + } + + /* Check current status */ +- clkctl = brcmf_sdiod_regrb(bus->sdiodev, ++ clkctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); + if (err) { + brcmf_err("HT Avail read error: %d\n", err); +@@ -790,35 +791,34 @@ static int brcmf_sdio_htclk(struct brcmf + /* Go to pending and await interrupt if appropriate */ + if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) { + /* Allow only clock-available interrupt */ +- devctl = brcmf_sdiod_regrb(bus->sdiodev, ++ devctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); + if (err) { +- brcmf_err("Devctl error setting CA: %d\n", +- err); ++ brcmf_err("Devctl error setting CA: %d\n", err); + return -EBADE; + } + + devctl |= SBSDIO_DEVCTL_CA_INT_ONLY; +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, +- devctl, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL, ++ devctl, &err); + brcmf_dbg(SDIO, "CLKCTL: set PENDING\n"); + bus->clkstate = CLK_PENDING; + + return 0; + } else if (bus->clkstate == CLK_PENDING) { + /* Cancel CA-only interrupt filter */ +- devctl = brcmf_sdiod_regrb(bus->sdiodev, ++ devctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); + devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, +- devctl, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL, ++ devctl, &err); + } + + /* Otherwise, wait here (polling) for HT Avail */ + timeout = jiffies + + msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000); + while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { +- clkctl = brcmf_sdiod_regrb(bus->sdiodev, ++ clkctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if (time_after(jiffies, timeout)) +@@ -852,16 +852,16 @@ static int brcmf_sdio_htclk(struct brcmf + + if (bus->clkstate == CLK_PENDING) { + /* Cancel CA-only interrupt filter */ +- devctl = brcmf_sdiod_regrb(bus->sdiodev, ++ devctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); + devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, +- devctl, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL, ++ devctl, &err); + } + + bus->clkstate = CLK_SDONLY; +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, +- clkreq, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ clkreq, &err); + brcmf_dbg(SDIO, "CLKCTL: turned OFF\n"); + if (err) { + brcmf_err("Failed access turning clock off: %d\n", +@@ -951,14 +951,14 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio * + + /* Going to sleep */ + if (sleep) { +- clkcsr = brcmf_sdiod_regrb(bus->sdiodev, ++ clkcsr = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if ((clkcsr & SBSDIO_CSR_MASK) == 0) { + brcmf_dbg(SDIO, "no clock, set ALP\n"); +- brcmf_sdiod_regwb(bus->sdiodev, +- SBSDIO_FUNC1_CHIPCLKCSR, +- SBSDIO_ALP_AVAIL_REQ, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, ++ SBSDIO_FUNC1_CHIPCLKCSR, ++ SBSDIO_ALP_AVAIL_REQ, &err); + } + err = brcmf_sdio_kso_control(bus, false); + } else { +@@ -1178,16 +1178,16 @@ static void brcmf_sdio_rxfail(struct brc + if (abort) + brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); + +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, +- SFC_RF_TERM, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM, ++ &err); + bus->sdcnt.f1regdata++; + + /* Wait until the packet has been flushed (device/FIFO stable) */ + for (lastrbc = retries = 0xffff; retries > 0; retries--) { +- hi = brcmf_sdiod_regrb(bus->sdiodev, +- SBSDIO_FUNC1_RFRAMEBCHI, &err); +- lo = brcmf_sdiod_regrb(bus->sdiodev, +- SBSDIO_FUNC1_RFRAMEBCLO, &err); ++ hi = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCHI, ++ &err); ++ lo = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCLO, ++ &err); + bus->sdcnt.f1regdata += 2; + + if ((hi == 0) && (lo == 0)) +@@ -1229,12 +1229,12 @@ static void brcmf_sdio_txfail(struct brc + bus->sdcnt.tx_sderrs++; + + brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2); +- brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL); + bus->sdcnt.f1regdata++; + + for (i = 0; i < 3; i++) { +- hi = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL); +- lo = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL); ++ hi = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL); ++ lo = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL); + bus->sdcnt.f1regdata += 2; + if ((hi == 0) && (lo == 0)) + break; +@@ -2446,11 +2446,11 @@ static void brcmf_sdio_bus_stop(struct d + bus->hostintmask = 0; + + /* Force backplane clocks to assure F2 interrupt propagates */ +- saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if (!err) +- brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, +- (saveclk | SBSDIO_FORCE_HT), &err); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ (saveclk | SBSDIO_FORCE_HT), &err); + if (err) + brcmf_err("Failed to force clock for F2: err %d\n", + err); +@@ -2509,7 +2509,7 @@ static int brcmf_sdio_intr_rstatus(struc + buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus); + +- val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret); ++ val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret); + bus->sdcnt.f1regdata++; + if (ret != 0) + return ret; +@@ -2519,7 +2519,7 @@ static int brcmf_sdio_intr_rstatus(struc + + /* Clear interrupts */ + if (val) { +- brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret); ++ brcmf_sdiod_writel(bus->sdiodev, addr, val, &ret); + bus->sdcnt.f1regdata++; + atomic_or(val, &bus->intstatus); + } +@@ -2545,23 +2545,23 @@ static void brcmf_sdio_dpc(struct brcmf_ + + #ifdef DEBUG + /* Check for inconsistent device control */ +- devctl = brcmf_sdiod_regrb(bus->sdiodev, +- SBSDIO_DEVICE_CTL, &err); ++ devctl = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_DEVICE_CTL, ++ &err); + #endif /* DEBUG */ + + /* Read CSR, if clock on switch to AVAIL, else ignore */ +- clkctl = brcmf_sdiod_regrb(bus->sdiodev, ++ clkctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); + + brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n", + devctl, clkctl); + + if (SBSDIO_HTAV(clkctl)) { +- devctl = brcmf_sdiod_regrb(bus->sdiodev, ++ devctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); + devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, +- devctl, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, ++ SBSDIO_DEVICE_CTL, devctl, &err); + bus->clkstate = CLK_AVAIL; + } + } +@@ -3347,31 +3347,31 @@ static void brcmf_sdio_sr_init(struct br + + brcmf_dbg(TRACE, "Enter\n"); + +- val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err); ++ val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err); + if (err) { + brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n"); + return; + } + + val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT; +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err); + if (err) { + brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n"); + return; + } + + /* Add CMD14 Support */ +- brcmf_sdiod_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP, +- (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | +- SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT), +- &err); ++ brcmf_sdiod_func0_wb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP, ++ (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | ++ SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT), ++ &err); + if (err) { + brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n"); + return; + } + +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, +- SBSDIO_FORCE_HT, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ SBSDIO_FORCE_HT, &err); + if (err) { + brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n"); + return; +@@ -3394,7 +3394,7 @@ static int brcmf_sdio_kso_init(struct br + if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) + return 0; + +- val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err); ++ val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err); + if (err) { + brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n"); + return err; +@@ -3403,8 +3403,8 @@ static int brcmf_sdio_kso_init(struct br + if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) { + val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN << + SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, +- val, &err); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, ++ val, &err); + if (err) { + brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n"); + return err; +@@ -3565,9 +3565,9 @@ static void brcmf_sdio_bus_watchdog(stru + u8 devpend; + + sdio_claim_host(bus->sdiodev->func[1]); +- devpend = brcmf_sdiod_regrb(bus->sdiodev, +- SDIO_CCCR_INTx, +- NULL); ++ devpend = brcmf_sdiod_func0_rb(bus->sdiodev, ++ SDIO_CCCR_INTx, ++ NULL); + sdio_release_host(bus->sdiodev->func[1]); + intstatus = devpend & (INTR_STATUS_FUNC1 | + INTR_STATUS_FUNC2); +@@ -3705,12 +3705,12 @@ brcmf_sdio_drivestrengthinit(struct brcm + } + } + addr = CORE_CC_REG(pmu->base, chipcontrol_addr); +- brcmf_sdiod_regwl(sdiodev, addr, 1, NULL); +- cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL); ++ brcmf_sdiod_writel(sdiodev, addr, 1, NULL); ++ cc_data_temp = brcmf_sdiod_readl(sdiodev, addr, NULL); + cc_data_temp &= ~str_mask; + drivestrength_sel <<= str_shift; + cc_data_temp |= drivestrength_sel; +- brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL); ++ brcmf_sdiod_writel(sdiodev, addr, cc_data_temp, NULL); + + brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n", + str_tab[i].strength, drivestrength, cc_data_temp); +@@ -3725,7 +3725,7 @@ static int brcmf_sdio_buscoreprep(void * + + /* Try forcing SDIO core to do ALPAvail request only */ + clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; +- brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + if (err) { + brcmf_err("error writing for HT off\n"); + return err; +@@ -3733,8 +3733,7 @@ static int brcmf_sdio_buscoreprep(void * + + /* If register supported, wait for ALPAvail and then force ALP */ + /* This may take up to 15 milliseconds */ +- clkval = brcmf_sdiod_regrb(sdiodev, +- SBSDIO_FUNC1_CHIPCLKCSR, NULL); ++ clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, NULL); + + if ((clkval & ~SBSDIO_AVBITS) != clkset) { + brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", +@@ -3742,10 +3741,11 @@ static int brcmf_sdio_buscoreprep(void * + return -EACCES; + } + +- SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev, +- SBSDIO_FUNC1_CHIPCLKCSR, NULL)), +- !SBSDIO_ALPAV(clkval)), +- PMU_MAX_TRANSITION_DLY); ++ SPINWAIT(((clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ NULL)), ++ !SBSDIO_ALPAV(clkval)), ++ PMU_MAX_TRANSITION_DLY); ++ + if (!SBSDIO_ALPAV(clkval)) { + brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n", + clkval); +@@ -3753,11 +3753,11 @@ static int brcmf_sdio_buscoreprep(void * + } + + clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; +- brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + udelay(65); + + /* Also, disable the extra SDIO pull-ups */ +- brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); + + return 0; + } +@@ -3772,7 +3772,7 @@ static void brcmf_sdio_buscore_activate( + /* clear all interrupts */ + core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV); + reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus); +- brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); ++ brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL); + + if (rstvec) + /* Write reset vector to address 0 */ +@@ -3785,7 +3785,7 @@ static u32 brcmf_sdio_buscore_read32(voi + struct brcmf_sdio_dev *sdiodev = ctx; + u32 val, rev; + +- val = brcmf_sdiod_regrl(sdiodev, addr, NULL); ++ val = brcmf_sdiod_readl(sdiodev, addr, NULL); + if ((sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 || + sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4339) && + addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) { +@@ -3802,7 +3802,7 @@ static void brcmf_sdio_buscore_write32(v + { + struct brcmf_sdio_dev *sdiodev = ctx; + +- brcmf_sdiod_regwl(sdiodev, addr, val, NULL); ++ brcmf_sdiod_writel(sdiodev, addr, val, NULL); + } + + static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = { +@@ -3826,18 +3826,18 @@ brcmf_sdio_probe_attach(struct brcmf_sdi + sdio_claim_host(sdiodev->func[1]); + + pr_debug("F1 signature read @0x18000000=0x%4x\n", +- brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL)); ++ brcmf_sdiod_readl(sdiodev, SI_ENUM_BASE, NULL)); + + /* + * Force PLL off until brcmf_chip_attach() + * programs PLL control regs + */ + +- brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, +- BRCMF_INIT_CLKCTL1, &err); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, BRCMF_INIT_CLKCTL1, ++ &err); + if (!err) +- clkctl = brcmf_sdiod_regrb(sdiodev, +- SBSDIO_FUNC1_CHIPCLKCSR, &err); ++ clkctl = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ &err); + + if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { + brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n", +@@ -3897,25 +3897,25 @@ brcmf_sdio_probe_attach(struct brcmf_sdi + brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength); + + /* Set card control so an SDIO card reset does a WLAN backplane reset */ +- reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err); ++ reg_val = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err); + if (err) + goto fail; + + reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET; + +- brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); ++ brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); + if (err) + goto fail; + + /* set PMUControl so a backplane reset does PMU state reload */ + reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol); +- reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err); ++ reg_val = brcmf_sdiod_readl(sdiodev, reg_addr, &err); + if (err) + goto fail; + + reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); + +- brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err); ++ brcmf_sdiod_writel(sdiodev, reg_addr, reg_val, &err); + if (err) + goto fail; + +@@ -4055,10 +4055,10 @@ static void brcmf_sdio_firmware_callback + goto release; + + /* Force clocks on backplane to be sure F2 interrupt propagates */ +- saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err); ++ saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err); + if (!err) { +- brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, +- (saveclk | SBSDIO_FORCE_HT), &err); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ (saveclk | SBSDIO_FORCE_HT), &err); + } + if (err) { + brcmf_err("Failed to force clock for F2: err %d\n", err); +@@ -4080,7 +4080,7 @@ static void brcmf_sdio_firmware_callback + w_sdreg32(bus, bus->hostintmask, + offsetof(struct sdpcmd_regs, hostintmask)); + +- brcmf_sdiod_regwb(sdiodev, SBSDIO_WATERMARK, 8, &err); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err); + } else { + /* Disable F2 again */ + sdio_disable_func(sdiodev->func[SDIO_FUNC_2]); +@@ -4091,8 +4091,8 @@ static void brcmf_sdio_firmware_callback + brcmf_sdio_sr_init(bus); + } else { + /* Restore previous clock setting */ +- brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, +- saveclk, &err); ++ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ saveclk, &err); + } + + if (err == 0) { +@@ -4225,7 +4225,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru + bus->rxflow = false; + + /* Done with backplane-dependent accesses, can drop clock... */ +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); ++ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); + + sdio_release_host(bus->sdiodev->func[1]); + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h +@@ -50,6 +50,7 @@ + #define SBSDIO_NUM_FUNCTION 3 + + /* function 0 vendor specific CCCR registers */ ++ + #define SDIO_CCCR_BRCM_CARDCAP 0xf0 + #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02 + #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04 +@@ -131,8 +132,6 @@ + /* with b15, maps to 32-bit SB access */ + #define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000 + +-/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */ +- + /* Address bits from SBADDR regs */ + #define SBSDIO_SBWINDOW_MASK 0xffff8000 + +@@ -293,13 +292,24 @@ struct sdpcmd_regs { + int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev); + void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev); + +-/* sdio device register access interface */ +-u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +-u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +-void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data, +- int *ret); +-void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data, +- int *ret); ++/* SDIO device register access interface */ ++/* Accessors for SDIO Function 0 */ ++#define brcmf_sdiod_func0_rb(sdiodev, addr, r) \ ++ sdio_readb((sdiodev)->func[0], (addr), (r)) ++ ++#define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \ ++ sdio_writeb((sdiodev)->func[0], (v), (addr), (ret)) ++ ++/* Accessors for SDIO Function 1 */ ++#define brcmf_sdiod_readb(sdiodev, addr, r) \ ++ sdio_readb((sdiodev)->func[1], (addr), (r)) ++ ++#define brcmf_sdiod_writeb(sdiodev, addr, v, ret) \ ++ sdio_writeb((sdiodev)->func[1], (v), (addr), (ret)) ++ ++u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); ++void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data, ++ int *ret); + + /* Buffer transfer to/from device (client) core via cmd53. + * fn: function number diff --git a/package/kernel/mac80211/patches/312-v4.16-0005-brcmfmac-Tidy-register-definitions-a-little.patch b/package/kernel/mac80211/patches/312-v4.16-0005-brcmfmac-Tidy-register-definitions-a-little.patch new file mode 100644 index 0000000000..e77d601a81 --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0005-brcmfmac-Tidy-register-definitions-a-little.patch @@ -0,0 +1,59 @@ +From eeef8a5da781e11746347b3cd9f1942be48ebaf0 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:30 +0100 +Subject: [PATCH] brcmfmac: Tidy register definitions a little + +Trivial tidy of register definitions. + +Signed-off-by: Ian Molton +Acked-by: Arend van Spriel +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + .../net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 ++-- + .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 19 ++++++++++--------- + 2 files changed, 12 insertions(+), 11 deletions(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +@@ -153,9 +153,9 @@ int brcmf_sdiod_intr_register(struct brc + brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret); + + /* redirect, configure and enable io for interrupt signal */ +- data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; ++ data = SDIO_CCCR_BRCM_SEPINT_MASK | SDIO_CCCR_BRCM_SEPINT_OE; + if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH) +- data |= SDIO_SEPINT_ACT_HI; ++ data |= SDIO_CCCR_BRCM_SEPINT_ACT_HI; + brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, + data, &ret); + sdio_release_host(sdiodev->func[1]); +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h +@@ -52,16 +52,17 @@ + /* function 0 vendor specific CCCR registers */ + + #define SDIO_CCCR_BRCM_CARDCAP 0xf0 +-#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02 +-#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04 +-#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC 0x08 +-#define SDIO_CCCR_BRCM_CARDCTRL 0xf1 +-#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET 0x02 +-#define SDIO_CCCR_BRCM_SEPINT 0xf2 ++#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT BIT(1) ++#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT BIT(2) ++#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC BIT(3) ++ ++#define SDIO_CCCR_BRCM_CARDCTRL 0xf1 ++#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET BIT(1) + +-#define SDIO_SEPINT_MASK 0x01 +-#define SDIO_SEPINT_OE 0x02 +-#define SDIO_SEPINT_ACT_HI 0x04 ++#define SDIO_CCCR_BRCM_SEPINT 0xf2 ++#define SDIO_CCCR_BRCM_SEPINT_MASK BIT(0) ++#define SDIO_CCCR_BRCM_SEPINT_OE BIT(1) ++#define SDIO_CCCR_BRCM_SEPINT_ACT_HI BIT(2) + + /* function 1 miscellaneous registers */ + diff --git a/package/kernel/mac80211/patches/312-v4.16-0006-brcmfmac-Remove-brcmf_sdiod_addrprep.patch b/package/kernel/mac80211/patches/312-v4.16-0006-brcmfmac-Remove-brcmf_sdiod_addrprep.patch new file mode 100644 index 0000000000..3c78af89d8 --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0006-brcmfmac-Remove-brcmf_sdiod_addrprep.patch @@ -0,0 +1,190 @@ +From a7c3aa1509e243a09c5b1660c8702d792ca76aed Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:31 +0100 +Subject: [PATCH] brcmfmac: Remove brcmf_sdiod_addrprep() + +This function has become trivial enough that it may as well be pushed into +its callers, which has the side-benefit of clarifying what's going on. + +Remove it, and rename brcmf_sdiod_set_sbaddr_window() to +brcmf_sdiod_set_backplane_window() as it's easier to understand. + +Signed-off-by: Ian Molton +Reviewed-by: Arend van Spriel +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 84 ++++++++++++---------- + 1 file changed, 46 insertions(+), 38 deletions(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +@@ -230,41 +230,25 @@ void brcmf_sdiod_change_state(struct brc + sdiodev->state = state; + } + +-static int brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, +- u32 address) ++static int brcmf_sdiod_set_backplane_window(struct brcmf_sdio_dev *sdiodev, ++ u32 addr) + { ++ u32 v, bar0 = addr & SBSDIO_SBWINDOW_MASK; + int err = 0, i; +- u32 addr; + +- if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM) +- return -ENOMEDIUM; ++ if (bar0 == sdiodev->sbwad) ++ return 0; + +- addr = (address & SBSDIO_SBWINDOW_MASK) >> 8; ++ v = bar0 >> 8; + +- for (i = 0 ; i < 3 && !err ; i++, addr >>= 8) ++ for (i = 0 ; i < 3 && !err ; i++, v >>= 8) + brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i, +- addr & 0xff, &err); +- +- return err; +-} +- +-static int brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, u32 *addr) +-{ +- uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK; +- int err = 0; +- +- if (bar0 != sdiodev->sbwad) { +- err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0); +- if (err) +- return err; ++ v & 0xff, &err); + ++ if (!err) + sdiodev->sbwad = bar0; +- } +- +- *addr &= SBSDIO_SB_OFT_ADDR_MASK; +- *addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; + +- return 0; ++ return err; + } + + u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) +@@ -272,11 +256,16 @@ u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) + u32 data = 0; + int retval; + +- retval = brcmf_sdiod_addrprep(sdiodev, &addr); ++ retval = brcmf_sdiod_set_backplane_window(sdiodev, addr); ++ if (retval) ++ goto out; ++ ++ addr &= SBSDIO_SB_OFT_ADDR_MASK; ++ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; + +- if (!retval) +- data = sdio_readl(sdiodev->func[1], addr, &retval); ++ data = sdio_readl(sdiodev->func[1], addr, &retval); + ++out: + if (ret) + *ret = retval; + +@@ -288,11 +277,16 @@ void brcmf_sdiod_writel(struct brcmf_sdi + { + int retval; + +- retval = brcmf_sdiod_addrprep(sdiodev, &addr); ++ retval = brcmf_sdiod_set_backplane_window(sdiodev, addr); ++ if (retval) ++ goto out; ++ ++ addr &= SBSDIO_SB_OFT_ADDR_MASK; ++ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; + +- if (!retval) +- sdio_writel(sdiodev->func[1], data, addr, &retval); ++ sdio_writel(sdiodev->func[1], data, addr, &retval); + ++out: + if (ret) + *ret = retval; + } +@@ -540,10 +534,13 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt) + + brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len); + +- err = brcmf_sdiod_addrprep(sdiodev, &addr); ++ err = brcmf_sdiod_set_backplane_window(sdiodev, addr); + if (err) + goto done; + ++ addr &= SBSDIO_SB_OFT_ADDR_MASK; ++ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; ++ + err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, pkt); + + done: +@@ -561,10 +558,13 @@ int brcmf_sdiod_recv_chain(struct brcmf_ + brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", + addr, pktq->qlen); + +- err = brcmf_sdiod_addrprep(sdiodev, &addr); ++ err = brcmf_sdiod_set_backplane_window(sdiodev, addr); + if (err) + goto done; + ++ addr &= SBSDIO_SB_OFT_ADDR_MASK; ++ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; ++ + if (pktq->qlen == 1) + err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, + pktq->next); +@@ -606,7 +606,12 @@ int brcmf_sdiod_send_buf(struct brcmf_sd + + memcpy(mypkt->data, buf, nbytes); + +- err = brcmf_sdiod_addrprep(sdiodev, &addr); ++ err = brcmf_sdiod_set_backplane_window(sdiodev, addr); ++ if (err) ++ return err; ++ ++ addr &= SBSDIO_SB_OFT_ADDR_MASK; ++ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; + + if (!err) + err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt); +@@ -625,10 +630,13 @@ int brcmf_sdiod_send_pkt(struct brcmf_sd + + brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen); + +- err = brcmf_sdiod_addrprep(sdiodev, &addr); ++ err = brcmf_sdiod_set_backplane_window(sdiodev, addr); + if (err) + return err; + ++ addr &= SBSDIO_SB_OFT_ADDR_MASK; ++ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; ++ + if (pktq->qlen == 1 || !sdiodev->sg_support) { + skb_queue_walk(pktq, skb) { + err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, +@@ -673,7 +681,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev + /* Do the transfer(s) */ + while (size) { + /* Set the backplane window to include the start address */ +- err = brcmf_sdiod_set_sbaddr_window(sdiodev, address); ++ err = brcmf_sdiod_set_backplane_window(sdiodev, address); + if (err) + break; + +@@ -716,7 +724,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev + dev_kfree_skb(pkt); + + /* Return the window to backplane enumeration space for core access */ +- if (brcmf_sdiod_set_sbaddr_window(sdiodev, sdiodev->sbwad)) ++ if (brcmf_sdiod_set_backplane_window(sdiodev, sdiodev->sbwad)) + brcmf_err("FAILED to set window back to 0x%x\n", + sdiodev->sbwad); + diff --git a/package/kernel/mac80211/patches/312-v4.16-0007-brcmfmac-remove-unnecessary-call-to-brcmf_sdiod_set_.patch b/package/kernel/mac80211/patches/312-v4.16-0007-brcmfmac-remove-unnecessary-call-to-brcmf_sdiod_set_.patch new file mode 100644 index 0000000000..b9410dd7d0 --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0007-brcmfmac-remove-unnecessary-call-to-brcmf_sdiod_set_.patch @@ -0,0 +1,32 @@ +From c900072bd6faff089aa4fb7b19136a2a0fe3baf0 Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:32 +0100 +Subject: [PATCH] brcmfmac: remove unnecessary call to + brcmf_sdiod_set_backplane_window() + +All functions that might require the window address changing call +brcmf_sdiod_set_backplane_window() prior to access. Thus resetting +the window is not required. + +Signed-off-by: Ian Molton +[arend: corrected the driver prefix in the subject] +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 5 ----- + 1 file changed, 5 deletions(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +@@ -723,11 +723,6 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev + + dev_kfree_skb(pkt); + +- /* Return the window to backplane enumeration space for core access */ +- if (brcmf_sdiod_set_backplane_window(sdiodev, sdiodev->sbwad)) +- brcmf_err("FAILED to set window back to 0x%x\n", +- sdiodev->sbwad); +- + sdio_release_host(sdiodev->func[1]); + + return err; diff --git a/package/kernel/mac80211/patches/312-v4.16-0008-brcmfmac-Cleanup-offsetof.patch b/package/kernel/mac80211/patches/312-v4.16-0008-brcmfmac-Cleanup-offsetof.patch new file mode 100644 index 0000000000..f9e5df550f --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0008-brcmfmac-Cleanup-offsetof.patch @@ -0,0 +1,134 @@ +From e4c05fc3c0a6c79376f72f17d08014477e962ada Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:33 +0100 +Subject: [PATCH] brcmfmac: Cleanup offsetof() + +Create a macro to make the code a bit more readable, whilst we're stuck +with using struct element offsets as register offsets. + +Signed-off-by: Ian Molton +Reviewed-by: Arend van Spriel +[arend: rename macro to SD_REG] +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 35 +++++++++------------- + 1 file changed, 14 insertions(+), 21 deletions(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +@@ -161,6 +161,8 @@ struct rte_console { + + #define CORE_BUS_REG(base, field) \ + (base + offsetof(struct sdpcmd_regs, field)) ++#define SD_REG(field) \ ++ (offsetof(struct sdpcmd_regs, field)) + + /* SDIO function 1 register CHIPCLKCSR */ + /* Force ALP request to backplane */ +@@ -1087,12 +1089,10 @@ static u32 brcmf_sdio_hostmail(struct br + brcmf_dbg(SDIO, "Enter\n"); + + /* Read mailbox data and ack that we did so */ +- ret = r_sdreg32(bus, &hmb_data, +- offsetof(struct sdpcmd_regs, tohostmailboxdata)); ++ ret = r_sdreg32(bus, &hmb_data, SD_REG(tohostmailboxdata)); + + if (ret == 0) +- w_sdreg32(bus, SMB_INT_ACK, +- offsetof(struct sdpcmd_regs, tosbmailbox)); ++ w_sdreg32(bus, SMB_INT_ACK, SD_REG(tosbmailbox)); + bus->sdcnt.f1regdata += 2; + + /* dongle indicates the firmware has halted/crashed */ +@@ -1207,8 +1207,7 @@ static void brcmf_sdio_rxfail(struct brc + + if (rtx) { + bus->sdcnt.rxrtx++; +- err = w_sdreg32(bus, SMB_NAK, +- offsetof(struct sdpcmd_regs, tosbmailbox)); ++ err = w_sdreg32(bus, SMB_NAK, SD_REG(tosbmailbox)); + + bus->sdcnt.f1regdata++; + if (err == 0) +@@ -2333,9 +2332,7 @@ static uint brcmf_sdio_sendfromq(struct + if (!bus->intr) { + /* Check device status, signal pending interrupt */ + sdio_claim_host(bus->sdiodev->func[1]); +- ret = r_sdreg32(bus, &intstatus, +- offsetof(struct sdpcmd_regs, +- intstatus)); ++ ret = r_sdreg32(bus, &intstatus, SD_REG(intstatus)); + sdio_release_host(bus->sdiodev->func[1]); + bus->sdcnt.f2txdata++; + if (ret != 0) +@@ -2441,7 +2438,7 @@ static void brcmf_sdio_bus_stop(struct d + brcmf_sdio_bus_sleep(bus, false, false); + + /* Disable and clear interrupts at the chip level also */ +- w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask)); ++ w_sdreg32(bus, 0, SD_REG(hostintmask)); + local_hostintmask = bus->hostintmask; + bus->hostintmask = 0; + +@@ -2460,8 +2457,7 @@ static void brcmf_sdio_bus_stop(struct d + sdio_disable_func(sdiodev->func[SDIO_FUNC_2]); + + /* Clear any pending interrupts now that F2 is disabled */ +- w_sdreg32(bus, local_hostintmask, +- offsetof(struct sdpcmd_regs, intstatus)); ++ w_sdreg32(bus, local_hostintmask, SD_REG(intstatus)); + + sdio_release_host(sdiodev->func[1]); + } +@@ -2507,7 +2503,7 @@ static int brcmf_sdio_intr_rstatus(struc + int ret; + + buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); +- addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus); ++ addr = buscore->base + SD_REG(intstatus); + + val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret); + bus->sdcnt.f1regdata++; +@@ -2584,11 +2580,9 @@ static void brcmf_sdio_dpc(struct brcmf_ + */ + if (intstatus & I_HMB_FC_CHANGE) { + intstatus &= ~I_HMB_FC_CHANGE; +- err = w_sdreg32(bus, I_HMB_FC_CHANGE, +- offsetof(struct sdpcmd_regs, intstatus)); ++ err = w_sdreg32(bus, I_HMB_FC_CHANGE, SD_REG(intstatus)); + +- err = r_sdreg32(bus, &newstatus, +- offsetof(struct sdpcmd_regs, intstatus)); ++ err = r_sdreg32(bus, &newstatus, SD_REG(intstatus)); + bus->sdcnt.f1regdata += 2; + atomic_set(&bus->fcstate, + !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE))); +@@ -3771,7 +3765,7 @@ static void brcmf_sdio_buscore_activate( + + /* clear all interrupts */ + core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV); +- reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus); ++ reg_addr = core->base + SD_REG(intstatus); + brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL); + + if (rstvec) +@@ -4067,7 +4061,7 @@ static void brcmf_sdio_firmware_callback + + /* Enable function 2 (frame transfers) */ + w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, +- offsetof(struct sdpcmd_regs, tosbmailboxdata)); ++ SD_REG(tosbmailboxdata)); + err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]); + + +@@ -4077,8 +4071,7 @@ static void brcmf_sdio_firmware_callback + if (!err) { + /* Set up the interrupt mask and enable interrupts */ + bus->hostintmask = HOSTINTMASK; +- w_sdreg32(bus, bus->hostintmask, +- offsetof(struct sdpcmd_regs, hostintmask)); ++ w_sdreg32(bus, bus->hostintmask, SD_REG(hostintmask)); + + brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err); + } else { diff --git a/package/kernel/mac80211/patches/312-v4.16-0009-brcmfmac-Remove-unused-macro.patch b/package/kernel/mac80211/patches/312-v4.16-0009-brcmfmac-Remove-unused-macro.patch new file mode 100644 index 0000000000..df72a70b3b --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0009-brcmfmac-Remove-unused-macro.patch @@ -0,0 +1,26 @@ +From 5cfe38f1f8d3c6b98e15b8cfde05028a3c79930b Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:34 +0100 +Subject: [PATCH] brcmfmac: Remove unused macro. + +This macro is used exactly nowhere in the code. Delete it. + +Signed-off-by: Ian Molton +Reviewed-by: Arend van Spriel +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +@@ -159,8 +159,6 @@ struct rte_console { + /* manfid tuple length, include tuple, link bytes */ + #define SBSDIO_CIS_MANFID_TUPLE_LEN 6 + +-#define CORE_BUS_REG(base, field) \ +- (base + offsetof(struct sdpcmd_regs, field)) + #define SD_REG(field) \ + (offsetof(struct sdpcmd_regs, field)) + diff --git a/package/kernel/mac80211/patches/312-v4.16-0010-brcmfmac-Remove-repeated-calls-to-brcmf_chip_get_cor.patch b/package/kernel/mac80211/patches/312-v4.16-0010-brcmfmac-Remove-repeated-calls-to-brcmf_chip_get_cor.patch new file mode 100644 index 0000000000..69fbf5c80f --- /dev/null +++ b/package/kernel/mac80211/patches/312-v4.16-0010-brcmfmac-Remove-repeated-calls-to-brcmf_chip_get_cor.patch @@ -0,0 +1,128 @@ +From 21a10846d09db3c5e3bdfb0be0fc7aa9fdc7000a Mon Sep 17 00:00:00 2001 +From: Ian Molton +Date: Fri, 8 Dec 2017 13:10:35 +0100 +Subject: [PATCH] brcmfmac: Remove repeated calls to brcmf_chip_get_core() + +There is no need to repeatdly call brcmf_chip_get_core(), which +traverses a list of cores every time its called (including during +register access code!). + +Call it once, and store a pointer to the core structure. The existing +code does nto keep track of users of the cores anyway, and even so, this +will allow for easier refcounting in future. + +Signed-off-by: Ian Molton +Reviewed-by: Arend van Spriel +Signed-off-by: Arend van Spriel +Signed-off-by: Kalle Valo +--- + .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 25 +++++++++++++--------- + 1 file changed, 15 insertions(+), 10 deletions(-) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +@@ -436,6 +436,7 @@ struct brcmf_sdio_count { + struct brcmf_sdio { + struct brcmf_sdio_dev *sdiodev; /* sdio device handler */ + struct brcmf_chip *ci; /* Chip info struct */ ++ struct brcmf_core *sdio_core; /* sdio core info struct */ + + u32 hostintmask; /* Copy of Host Interrupt Mask */ + atomic_t intstatus; /* Intstatus bits (events) pending */ +@@ -665,10 +666,9 @@ static bool data_ok(struct brcmf_sdio *b + */ + static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset) + { +- struct brcmf_core *core; ++ struct brcmf_core *core = bus->sdio_core; + int ret; + +- core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + *regvar = brcmf_sdiod_readl(bus->sdiodev, core->base + offset, &ret); + + return ret; +@@ -676,10 +676,9 @@ static int r_sdreg32(struct brcmf_sdio * + + static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) + { +- struct brcmf_core *core; ++ struct brcmf_core *core = bus->sdio_core; + int ret; + +- core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + brcmf_sdiod_writel(bus->sdiodev, core->base + reg_offset, regval, &ret); + + return ret; +@@ -2495,12 +2494,11 @@ static inline void brcmf_sdio_clrintr(st + + static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) + { +- struct brcmf_core *buscore; ++ struct brcmf_core *buscore = bus->sdio_core; + u32 addr; + unsigned long val; + int ret; + +- buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + addr = buscore->base + SD_REG(intstatus); + + val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret); +@@ -3377,13 +3375,14 @@ static void brcmf_sdio_sr_init(struct br + /* enable KSO bit */ + static int brcmf_sdio_kso_init(struct brcmf_sdio *bus) + { ++ struct brcmf_core *core = bus->sdio_core; + u8 val; + int err = 0; + + brcmf_dbg(TRACE, "Enter\n"); + + /* KSO bit added in SDIO core rev 12 */ +- if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) ++ if (core->rev < 12) + return 0; + + val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err); +@@ -3412,6 +3411,7 @@ static int brcmf_sdio_bus_preinit(struct + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; ++ struct brcmf_core *core = bus->sdio_core; + uint pad_size; + u32 value; + int err; +@@ -3420,7 +3420,7 @@ static int brcmf_sdio_bus_preinit(struct + * a device perspective, ie. bus:txglom affects the + * bus transfers from device to host. + */ +- if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) { ++ if (core->rev < 12) { + /* for sdio core rev < 12, disable txgloming */ + value = 0; + err = brcmf_iovar_data_set(dev, "bus:txglom", &value, +@@ -3758,11 +3758,10 @@ static void brcmf_sdio_buscore_activate( + u32 rstvec) + { + struct brcmf_sdio_dev *sdiodev = ctx; +- struct brcmf_core *core; ++ struct brcmf_core *core = sdiodev->bus->sdio_core; + u32 reg_addr; + + /* clear all interrupts */ +- core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV); + reg_addr = core->base + SD_REG(intstatus); + brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL); + +@@ -3843,6 +3842,12 @@ brcmf_sdio_probe_attach(struct brcmf_sdi + bus->ci = NULL; + goto fail; + } ++ ++ /* Pick up the SDIO core info struct from chip.c */ ++ bus->sdio_core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); ++ if (!bus->sdio_core) ++ goto fail; ++ + sdiodev->settings = brcmf_get_module_param(sdiodev->dev, + BRCMF_BUSTYPE_SDIO, + bus->ci->chip,