From: Rafał Miłecki Date: Fri, 11 Nov 2022 15:51:29 +0000 (+0100) Subject: bcm4908: prepare support for kernel 5.15 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=66b6414a20aaa4e129843f71c7f25e212c39b2b1;p=openwrt%2Fstaging%2Fnbd.git bcm4908: prepare support for kernel 5.15 Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/bcm4908/Makefile b/target/linux/bcm4908/Makefile index fcfe04962b..b5f98a29da 100644 --- a/target/linux/bcm4908/Makefile +++ b/target/linux/bcm4908/Makefile @@ -10,6 +10,7 @@ CPU_TYPE:=cortex-a53 SUBTARGETS:=generic KERNEL_PATCHVER:=5.10 +KERNEL_TESTING_PATCHVER:=5.15 define Target/Description Build firmware images for Broadcom BCM4908 SoC family routers. diff --git a/target/linux/bcm4908/config-5.15 b/target/linux/bcm4908/config-5.15 new file mode 100644 index 0000000000..2e8b3df71b --- /dev/null +++ b/target/linux/bcm4908/config-5.15 @@ -0,0 +1,234 @@ +CONFIG_64BIT=y +CONFIG_ARCH_BCM4908=y +CONFIG_ARCH_BCMBCA=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=24 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_STACKWALK=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM64=y +CONFIG_ARM64_4K_PAGES=y +CONFIG_ARM64_CRYPTO=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_PA_BITS=48 +CONFIG_ARM64_PA_BITS_48=y +CONFIG_ARM64_PTR_AUTH=y +CONFIG_ARM64_PTR_AUTH_KERNEL=y +CONFIG_ARM64_SVE=y +CONFIG_ARM64_TAGGED_ADDR_ABI=y +CONFIG_ARM64_VA_BITS=39 +CONFIG_ARM64_VA_BITS_39=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ARM_PSCI_FW=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_B53=y +CONFIG_BCM4908_ENET=y +CONFIG_BCM7038_WDT=y +CONFIG_BCM7XXX_PHY=y +CONFIG_BCM_NET_PHYLIB=y +CONFIG_BCM_PMB=y +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_PM=y +CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="earlycon=bcm63xx_uart,0xff800640 console=ttyS0,115200" +CONFIG_COMMON_CLK=y +# CONFIG_COMPAT_32BIT_TIME is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_RMAP=y +CONFIG_CRC16=y +CONFIG_CRYPTO_AES_ARM64=y +CONFIG_CRYPTO_AES_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_BLAKE2S=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_SIMD=y +CONFIG_CRYPTO_ZSTD=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DMA_DIRECT_REMAP=y +CONFIG_DMA_REMAP=y +CONFIG_DTC=y +CONFIG_EDAC_SUPPORT=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FRAME_POINTER=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ARCH_TOPOLOGY=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GRO_CELLS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HOLES_IN_ZONE=y +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_BRCMSTB=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_LEDS_BCM63138=y +CONFIG_LEDS_GPIO=y +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MDIO_BCM_UNIMAC=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y +CONFIG_MEMFD_CREATE=y +CONFIG_MFD_SYSCON=y +CONFIG_MIGRATION=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_MTD_BRCM_U_BOOT=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND_BRCMNAND=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_OF_PARTS_BCM4908=y +# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPLIT_CFE_BOOTFS=y +# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NET_DEVLINK=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_BCM_SF2=y +CONFIG_NET_DSA_TAG_BRCM=y +CONFIG_NET_DSA_TAG_BRCM_COMMON=y +CONFIG_NET_DSA_TAG_BRCM_LEGACY=y +CONFIG_NET_DSA_TAG_BRCM_PREPEND=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NO_IOPORT_MAP=y +CONFIG_NR_CPUS=4 +CONFIG_NVMEM=y +CONFIG_NVMEM_SYSFS=y +CONFIG_NVMEM_U_BOOT_ENV=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_PADATA=y +CONFIG_PARTITION_PERCPU=y +CONFIG_PGTABLE_LEVELS=3 +CONFIG_PHYLIB=y +CONFIG_PHYLINK=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_PHY_BRCM_USB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_BCM4908=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PM=y +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_POWER_SUPPLY=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_RATIONAL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y +CONFIG_RELOCATABLE=y +CONFIG_RFS_ACCEL=y +CONFIG_RODATA_FULL_DEFAULT_ENABLED=y +CONFIG_RPS=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_BCM63XX=y +CONFIG_SERIAL_BCM63XX_CONSOLE=y +CONFIG_SGL_ALLOC=y +CONFIG_SMP=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSE_IRQ=y +CONFIG_SRCU=y +CONFIG_SWIOTLB=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UBIFS_FS=y +CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_USB_SUPPORT=y +CONFIG_VMAP_STACK=y +CONFIG_WATCHDOG_CORE=y +CONFIG_XPS=y +CONFIG_XXHASH=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA32=y +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch b/target/linux/bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch new file mode 100644 index 0000000000..07a0c5f8d0 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch @@ -0,0 +1,27 @@ +From d0ae9c944b9472c5691a482297df7a57d7fd1199 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 19 Aug 2021 14:11:08 +0200 +Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix NAND node name +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This matches nand-controller.yaml requirements. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +@@ -298,7 +298,7 @@ + status = "okay"; + }; + +- nand@1800 { ++ nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; diff --git a/target/linux/bcm4908/patches-5.15/031-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch b/target/linux/bcm4908/patches-5.15/031-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch new file mode 100644 index 0000000000..4d5ffcb9e3 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/031-v5.17-0001-dt-bindings-arm-bcm-document-Netgear-RAXE500-binding.patch @@ -0,0 +1,27 @@ +From 7b0c9ca7f18e8d2e2cf3c342d91f037d436777bf Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 5 Nov 2021 11:14:12 +0100 +Subject: [PATCH] dt-bindings: arm: bcm: document Netgear RAXE500 binding +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +One more BCM4908 based device. + +Signed-off-by: Rafał Miłecki +Acked-by: Rob Herring +Signed-off-by: Florian Fainelli +--- + Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 + + 1 file changed, 1 insertion(+) + +--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml ++++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml +@@ -29,6 +29,7 @@ properties: + items: + - enum: + - asus,gt-ac5300 ++ - netgear,raxe500 + - const: brcm,bcm4908 + + - description: BCM49408 based boards diff --git a/target/linux/bcm4908/patches-5.15/031-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch b/target/linux/bcm4908/patches-5.15/031-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch new file mode 100644 index 0000000000..9e0236ad0f --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/031-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch @@ -0,0 +1,81 @@ +From d0e68d354f345873e15876a7b35be1baaf5e3ec9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 5 Nov 2021 11:14:13 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +It's a home router based on BCM4908 SoC. It has: 1 GiB of RAM, 512 MiB +NAND flash, 6 Ethernet ports and 3 x BCM43684 (WiFi). One of Ethernet +ports is "2.5 G Multi-Gig port" that isn't described yet (it isn't known +how it's wired up). + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 1 + + .../bcm4908/bcm4908-netgear-raxe500.dts | 50 +++++++++++++++++++ + 2 files changed, 51 insertions(+) + create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +@@ -2,3 +2,4 @@ + dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb + dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb + dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb ++dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts +@@ -0,0 +1,50 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include "bcm4908.dtsi" ++ ++/ { ++ compatible = "netgear,raxe500", "brcm,bcm4908"; ++ model = "Netgear RAXE500"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x40000000>; ++ }; ++}; ++ ++&ehci { ++ status = "okay"; ++}; ++ ++&ohci { ++ status = "okay"; ++}; ++ ++&xhci { ++ status = "okay"; ++}; ++ ++&ports { ++ port@0 { ++ label = "lan4"; ++ }; ++ ++ port@1 { ++ label = "lan3"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan1"; ++ }; ++ ++ port@7 { ++ reg = <7>; ++ phy-mode = "internal"; ++ phy-handle = <&phy12>; ++ label = "wan"; ++ }; ++}; diff --git a/target/linux/bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch b/target/linux/bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch new file mode 100644 index 0000000000..8560b8ee88 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch @@ -0,0 +1,160 @@ +From 72b1c5da796ec5266f2012c36470e226cb4f09c9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 30 Dec 2021 12:05:35 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcm4908: add pinctrl binding +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Describe pinmux block with its maps. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 135 ++++++++++++++++++ + 1 file changed, 135 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +@@ -289,6 +289,141 @@ + gpio-controller; + }; + ++ pinctrl@560 { ++ compatible = "brcm,bcm4908-pinctrl"; ++ reg = <0x560 0x10>; ++ ++ pins_led_0_a: led_0-a-pins { ++ function = "led_0"; ++ groups = "led_0_grp_a"; ++ }; ++ ++ pins_led_1_a: led_1-a-pins { ++ function = "led_1"; ++ groups = "led_1_grp_a"; ++ }; ++ ++ pins_led_2_a: led_2-a-pins { ++ function = "led_2"; ++ groups = "led_2_grp_a"; ++ }; ++ ++ pins_led_3_a: led_3-a-pins { ++ function = "led_3"; ++ groups = "led_3_grp_a"; ++ }; ++ ++ pins_led_4_a: led_4-a-pins { ++ function = "led_4"; ++ groups = "led_4_grp_a"; ++ }; ++ ++ pins_led_5_a: led_5-a-pins { ++ function = "led_5"; ++ groups = "led_5_grp_a"; ++ }; ++ ++ pins_led_6_a: led_6-a-pins { ++ function = "led_6"; ++ groups = "led_6_grp_a"; ++ }; ++ ++ pins_led_7_a: led_7-a-pins { ++ function = "led_7"; ++ groups = "led_7_grp_a"; ++ }; ++ ++ pins_led_8_a: led_8-a-pins { ++ function = "led_8"; ++ groups = "led_8_grp_a"; ++ }; ++ ++ pins_led_9_a: led_9-a-pins { ++ function = "led_9"; ++ groups = "led_9_grp_a"; ++ }; ++ ++ pins_led_21_a: led_21-a-pins { ++ function = "led_21"; ++ groups = "led_21_grp_a"; ++ }; ++ ++ pins_led_22_a: led_22-a-pins { ++ function = "led_22"; ++ groups = "led_22_grp_a"; ++ }; ++ ++ pins_led_26_a: led_26-a-pins { ++ function = "led_26"; ++ groups = "led_26_grp_a"; ++ }; ++ ++ pins_led_27_a: led_27-a-pins { ++ function = "led_27"; ++ groups = "led_27_grp_a"; ++ }; ++ ++ pins_led_28_a: led_28-a-pins { ++ function = "led_28"; ++ groups = "led_28_grp_a"; ++ }; ++ ++ pins_led_29_a: led_29-a-pins { ++ function = "led_29"; ++ groups = "led_29_grp_a"; ++ }; ++ ++ pins_led_30_a: led_30-a-pins { ++ function = "led_30"; ++ groups = "led_30_grp_a"; ++ }; ++ ++ pins_hs_uart: hs_uart-pins { ++ function = "hs_uart"; ++ groups = "hs_uart_grp"; ++ }; ++ ++ pins_i2c_a: i2c-a-pins { ++ function = "i2c"; ++ groups = "i2c_grp_a"; ++ }; ++ ++ pins_i2c_b: i2c-b-pins { ++ function = "i2c"; ++ groups = "i2c_grp_b"; ++ }; ++ ++ pins_i2s: i2s-pins { ++ function = "i2s"; ++ groups = "i2s_grp"; ++ }; ++ ++ pins_nand_ctrl: nand_ctrl-pins { ++ function = "nand_ctrl"; ++ groups = "nand_ctrl_grp"; ++ }; ++ ++ pins_nand_data: nand_data-pins { ++ function = "nand_data"; ++ groups = "nand_data_grp"; ++ }; ++ ++ pins_emmc_ctrl: emmc_ctrl-pins { ++ function = "emmc_ctrl"; ++ groups = "emmc_ctrl_grp"; ++ }; ++ ++ pins_usb0_pwr: usb0_pwr-pins { ++ function = "usb0_pwr"; ++ groups = "usb0_pwr_grp"; ++ }; ++ ++ pins_usb1_pwr: usb1_pwr-pins { ++ function = "usb1_pwr"; ++ groups = "usb1_pwr_grp"; ++ }; ++ }; ++ + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; diff --git a/target/linux/bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch b/target/linux/bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch new file mode 100644 index 0000000000..a0329d3276 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch @@ -0,0 +1,35 @@ +From 47513f6dd93b5b7d91143219c2c1fb883664ed13 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 9 Feb 2022 21:14:17 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcm4908: add watchdog block +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 has the same watchdog as BCM63xx devices. Use "brcm,bcm6345-wdt" +binding which matches the first SoC with that block. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +@@ -278,6 +278,15 @@ + twd: timer-mfd@400 { + compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; + reg = <0x400 0x4c>; ++ ranges = <0x0 0x400 0x4c>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ watchdog@28 { ++ compatible = "brcm,bcm6345-wdt"; ++ reg = <0x28 0x8>; ++ }; + }; + + gpio0: gpio-controller@500 { diff --git a/target/linux/bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch b/target/linux/bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch new file mode 100644 index 0000000000..d86da69893 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch @@ -0,0 +1,34 @@ +From ba5dfa2fd8d0aed4e4b6f650ba9e8ea7cdd6ead1 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 15 Feb 2022 07:36:39 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcm4908: add I2C block +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 uses the same I2C hw as BCM63xx / BCM67xx / BCM68xx SoCs. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +@@ -458,6 +458,15 @@ + }; + }; + ++ i2c@2100 { ++ compatible = "brcm,brcmper-i2c"; ++ reg = <0x2100 0x58>; ++ clock-frequency = <97500>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_i2c_a>; ++ status = "disabled"; ++ }; ++ + misc@2600 { + compatible = "brcm,misc", "simple-mfd"; + reg = <0x2600 0xe4>; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit new file mode 100644 index 0000000000..908b8c12dc --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit @@ -0,0 +1,199 @@ +From 076dcedc6628c6bf92bd17bfcf8fb7b1af62bfb6 Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 1 Jun 2022 15:56:51 -0700 +Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM63158 + +Add DTS for ARMv8 based broadband SoC BCM63158. bcm63158.dtsi is the +SoC description DTS header and bcm963158.dts is a simple DTS file for +Broadcom BCM963158 Reference board that only enable the UART port. + +Signed-off-by: William Zhang +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/Makefile | 1 + + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 2 + + .../boot/dts/broadcom/bcmbca/bcm63158.dtsi | 128 ++++++++++++++++++ + .../boot/dts/broadcom/bcmbca/bcm963158.dts | 30 ++++ + 4 files changed, 161 insertions(+) + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/Makefile + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts + +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -7,5 +7,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rp + bcm2837-rpi-cm3-io3.dtb + + subdir-y += bcm4908 ++subdir-y += bcmbca + subdir-y += northstar2 + subdir-y += stingray +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -0,0 +1,2 @@ ++# SPDX-License-Identifier: GPL-2.0 ++dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi +@@ -0,0 +1,128 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm63158", "brcm,bcmbca"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ interrupt-parent = <&gic>; ++ ++ cpus { ++ #address-cells = <2>; ++ #size-cells = <0>; ++ ++ B53_0: cpu@0 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x0>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_1: cpu@1 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x1>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_2: cpu@2 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x2>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_3: cpu@3 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x3>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ L2_0: l2-cache0 { ++ compatible = "cache"; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu: pmu { ++ compatible = "arm,cortex-a53-pmu"; ++ interrupts = , ++ , ++ , ++ ; ++ interrupt-affinity = <&B53_0>, <&B53_1>, ++ <&B53_2>, <&B53_3>; ++ }; ++ ++ clocks: clocks { ++ periph_clk: periph-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <200000000>; ++ }; ++ uart_clk: uart-clk { ++ compatible = "fixed-factor-clock"; ++ #clock-cells = <0>; ++ clocks = <&periph_clk>; ++ clock-div = <4>; ++ clock-mult = <1>; ++ }; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ axi@81000000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0x81000000 0x8000>; ++ ++ gic: interrupt-controller@1000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ interrupt-controller; ++ interrupts = ; ++ reg = <0x1000 0x1000>, ++ <0x2000 0x2000>, ++ <0x4000 0x2000>, ++ <0x6000 0x2000>; ++ }; ++ }; ++ ++ bus@ff800000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0xff800000 0x800000>; ++ ++ uart0: serial@12000 { ++ compatible = "arm,pl011", "arm,primecell"; ++ reg = <0x12000 0x1000>; ++ interrupts = ; ++ clocks = <&uart_clk>, <&uart_clk>; ++ clock-names = "uartclk", "apb_pclk"; ++ status = "disabled"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts +@@ -0,0 +1,30 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm63158.dtsi" ++ ++/ { ++ model = "Broadcom BCM963158 Reference Board"; ++ compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0 0x08000000>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgit new file mode 100644 index 0000000000..5cdb9d1df1 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgit @@ -0,0 +1,191 @@ +From 1ba56aeb391401c4cb2126c39f90b3cdbfabdb3f Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 1 Jun 2022 13:17:34 -0700 +Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM4912 + +Add DTS for ARMv8 based broadband SoC BCM4912. bcm4912.dtsi is the +SoC description DTS header and bcm94912.dts is a simple DTS file for +Broadcom BCM94912 Reference board that only enable the UART port. + +Signed-off-by: William Zhang +Acked-by: Krzysztof Kozlowski +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +- + .../boot/dts/broadcom/bcmbca/bcm4912.dtsi | 128 ++++++++++++++++++ + .../boot/dts/broadcom/bcmbca/bcm94912.dts | 30 ++++ + 3 files changed, 160 insertions(+), 1 deletion(-) + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -1,2 +1,3 @@ + # SPDX-License-Identifier: GPL-2.0 +-dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb ++dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ ++ bcm963158.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi +@@ -0,0 +1,128 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm4912", "brcm,bcmbca"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ interrupt-parent = <&gic>; ++ ++ cpus { ++ #address-cells = <2>; ++ #size-cells = <0>; ++ ++ B53_0: cpu@0 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x0>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_1: cpu@1 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x1>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_2: cpu@2 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x2>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_3: cpu@3 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x3>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ L2_0: l2-cache0 { ++ compatible = "cache"; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu: pmu { ++ compatible = "arm,cortex-a53-pmu"; ++ interrupts = , ++ , ++ , ++ ; ++ interrupt-affinity = <&B53_0>, <&B53_1>, ++ <&B53_2>, <&B53_3>; ++ }; ++ ++ clocks: clocks { ++ periph_clk: periph-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <200000000>; ++ }; ++ uart_clk: uart-clk { ++ compatible = "fixed-factor-clock"; ++ #clock-cells = <0>; ++ clocks = <&periph_clk>; ++ clock-div = <4>; ++ clock-mult = <1>; ++ }; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ axi@81000000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0x81000000 0x8000>; ++ ++ gic: interrupt-controller@1000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ interrupt-controller; ++ interrupts = ; ++ reg = <0x1000 0x1000>, ++ <0x2000 0x2000>, ++ <0x4000 0x2000>, ++ <0x6000 0x2000>; ++ }; ++ }; ++ ++ bus@ff800000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0xff800000 0x800000>; ++ ++ uart0: serial@12000 { ++ compatible = "arm,pl011", "arm,primecell"; ++ reg = <0x12000 0x1000>; ++ interrupts = ; ++ clocks = <&uart_clk>, <&uart_clk>; ++ clock-names = "uartclk", "apb_pclk"; ++ status = "disabled"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts +@@ -0,0 +1,30 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4912.dtsi" ++ ++/ { ++ model = "Broadcom BCM94912 Reference Board"; ++ compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0 0x08000000>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patchgit new file mode 100644 index 0000000000..f10a44f890 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patchgit @@ -0,0 +1,184 @@ +From e663e06bd3f21e64bc2163910f626af68add6308 Mon Sep 17 00:00:00 2001 +From: Anand Gore +Date: Wed, 1 Jun 2022 13:19:56 -0700 +Subject: [PATCH] ARM64: dts: Add DTS files for bcmbca SoC BCM6858 + +Add DTS for ARMv8 based broadband SoC BCM6858. bcm6858.dtsi is the SoC +description DTS header and bcm96858.dts is a simple DTS file for +Broadcom BCM96858 Reference board that only enables the UART port. + +Signed-off-by: Anand Gore +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +- + .../boot/dts/broadcom/bcmbca/bcm6858.dtsi | 121 ++++++++++++++++++ + .../boot/dts/broadcom/bcmbca/bcm96858.dts | 30 +++++ + 3 files changed, 153 insertions(+), 1 deletion(-) + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -1,3 +1,4 @@ + # SPDX-License-Identifier: GPL-2.0 + dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ +- bcm963158.dtb ++ bcm963158.dtb \ ++ bcm96858.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi +@@ -0,0 +1,121 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm6858", "brcm,bcmbca"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ interrupt-parent = <&gic>; ++ ++ cpus { ++ #address-cells = <2>; ++ #size-cells = <0>; ++ ++ B53_0: cpu@0 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x0>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_1: cpu@1 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x1>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_2: cpu@2 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x2>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_3: cpu@3 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x3>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ L2_0: l2-cache0 { ++ compatible = "cache"; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu: pmu { ++ compatible = "arm,armv8-pmuv3"; ++ interrupts = , ++ , ++ , ++ ; ++ interrupt-affinity = <&B53_0>, <&B53_1>, ++ <&B53_2>, <&B53_3>; ++ }; ++ ++ clocks: clocks { ++ periph_clk:periph-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <200000000>; ++ }; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ axi@81000000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0x81000000 0x8000>; ++ ++ gic: interrupt-controller@1000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ interrupt-controller; ++ reg = <0x1000 0x1000>, /* GICD */ ++ <0x2000 0x2000>, /* GICC */ ++ <0x4000 0x2000>, /* GICH */ ++ <0x6000 0x2000>; /* GICV */ ++ interrupts = ; ++ }; ++ }; ++ ++ bus@ff800000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0xff800000 0x62000>; ++ ++ uart0: serial@640 { ++ compatible = "brcm,bcm6345-uart"; ++ reg = <0x640 0x18>; ++ interrupts = ; ++ clocks = <&periph_clk>; ++ clock-names = "refclk"; ++ status = "disabled"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts +@@ -0,0 +1,30 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm6858.dtsi" ++ ++/ { ++ model = "Broadcom BCM96858 Reference Board"; ++ compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0 0x08000000>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patchgit new file mode 100644 index 0000000000..793c5af738 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0004-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63146.patchgit @@ -0,0 +1,174 @@ +From 82a58061ada60058ec00113c179380f945914709 Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 8 Jun 2022 11:00:59 -0700 +Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM63146 + +Add DTS for ARMv8 based broadband SoC BCM63146. bcm63146.dtsi is the +SoC description DTS header and bcm963146.dts is a simple DTS file for +Broadcom BCM963146 Reference board that only enable the UART port. + +Signed-off-by: William Zhang +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +- + .../boot/dts/broadcom/bcmbca/bcm63146.dtsi | 110 ++++++++++++++++++ + .../boot/dts/broadcom/bcmbca/bcm963146.dts | 30 +++++ + 3 files changed, 142 insertions(+), 1 deletion(-) + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -1,4 +1,5 @@ + # SPDX-License-Identifier: GPL-2.0 + dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ + bcm963158.dtb \ +- bcm96858.dtb ++ bcm96858.dtb \ ++ bcm963146.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi +@@ -0,0 +1,110 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm63146", "brcm,bcmbca"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ interrupt-parent = <&gic>; ++ ++ cpus { ++ #address-cells = <2>; ++ #size-cells = <0>; ++ ++ B53_0: cpu@0 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x0>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_1: cpu@1 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x1>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ L2_0: l2-cache0 { ++ compatible = "cache"; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu: pmu { ++ compatible = "arm,cortex-a53-pmu"; ++ interrupts = , ++ ; ++ interrupt-affinity = <&B53_0>, <&B53_1>; ++ }; ++ ++ clocks: clocks { ++ periph_clk: periph-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <200000000>; ++ }; ++ uart_clk: uart-clk { ++ compatible = "fixed-factor-clock"; ++ #clock-cells = <0>; ++ clocks = <&periph_clk>; ++ clock-div = <4>; ++ clock-mult = <1>; ++ }; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ axi@81000000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0x81000000 0x8000>; ++ ++ gic: interrupt-controller@1000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ interrupt-controller; ++ reg = <0x1000 0x1000>, ++ <0x2000 0x2000>, ++ <0x4000 0x2000>, ++ <0x6000 0x2000>; ++ interrupts = ; ++ }; ++ }; ++ ++ bus@ff800000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0xff800000 0x800000>; ++ ++ uart0: serial@12000 { ++ compatible = "arm,pl011", "arm,primecell"; ++ reg = <0x12000 0x1000>; ++ interrupts = ; ++ clocks = <&uart_clk>, <&uart_clk>; ++ clock-names = "uartclk", "apb_pclk"; ++ status = "disabled"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts +@@ -0,0 +1,30 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm63146.dtsi" ++ ++/ { ++ model = "Broadcom BCM963146 Reference Board"; ++ compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0 0x08000000>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patchgit new file mode 100644 index 0000000000..0fdafb7f17 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0005-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6856.patchgit @@ -0,0 +1,167 @@ +From 64eca7ad058cff861b48cdead8dee40dfc284e9e Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 8 Jun 2022 11:04:36 -0700 +Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM6856 + +Add DTS for ARMv8 based broadband SoC BCM6856. bcm6856.dtsi is the +SoC description DTS header and bcm96856.dts is a simple DTS file for +Broadcom BCM96956 Reference board that only enable the UART port. + +Signed-off-by: William Zhang +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +- + .../boot/dts/broadcom/bcmbca/bcm6856.dtsi | 103 ++++++++++++++++++ + .../boot/dts/broadcom/bcmbca/bcm96856.dts | 30 +++++ + 3 files changed, 135 insertions(+), 1 deletion(-) + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -2,4 +2,5 @@ + dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ + bcm963158.dtb \ + bcm96858.dtb \ +- bcm963146.dtb ++ bcm963146.dtb \ ++ bcm96856.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi +@@ -0,0 +1,103 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm6856", "brcm,bcmbca"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ interrupt-parent = <&gic>; ++ ++ cpus { ++ #address-cells = <2>; ++ #size-cells = <0>; ++ ++ B53_0: cpu@0 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x0>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_1: cpu@1 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x1>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ L2_0: l2-cache0 { ++ compatible = "cache"; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu: pmu { ++ compatible = "arm,cortex-a53-pmu"; ++ interrupts = , ++ ; ++ interrupt-affinity = <&B53_0>, <&B53_1>; ++ }; ++ ++ clocks: clocks { ++ periph_clk:periph-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <200000000>; ++ }; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ axi@81000000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0x81000000 0x8000>; ++ ++ gic: interrupt-controller@1000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ interrupt-controller; ++ reg = <0x1000 0x1000>, /* GICD */ ++ <0x2000 0x2000>, /* GICC */ ++ <0x4000 0x2000>, /* GICH */ ++ <0x6000 0x2000>; /* GICV */ ++ interrupts = ; ++ }; ++ }; ++ ++ bus@ff800000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0xff800000 0x800000>; ++ ++ uart0: serial@640 { ++ compatible = "brcm,bcm6345-uart"; ++ reg = <0x640 0x18>; ++ interrupts = ; ++ clocks = <&periph_clk>; ++ clock-names = "refclk"; ++ status = "disabled"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts +@@ -0,0 +1,30 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm6856.dtsi" ++ ++/ { ++ model = "Broadcom BCM96856 Reference Board"; ++ compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0 0x08000000>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patchgit new file mode 100644 index 0000000000..58af85a68c --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0006-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6813.patchgit @@ -0,0 +1,192 @@ +From eab6bb0994b806525fc5e362e8b865f61c4a9e20 Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Thu, 9 Jun 2022 17:15:33 -0700 +Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM6813 + +Add DTS for ARMv8 based broadband SoC BCM6813. bcm6813.dtsi is the +SoC description DTS header and bcm96813.dts is a simple DTS file for +Broadcom BCM96813 Reference board that only enable the UART port. + +Signed-off-by: William Zhang +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +- + .../boot/dts/broadcom/bcmbca/bcm6813.dtsi | 128 ++++++++++++++++++ + .../boot/dts/broadcom/bcmbca/bcm96813.dts | 30 ++++ + 3 files changed, 160 insertions(+), 1 deletion(-) + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -3,4 +3,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dt + bcm963158.dtb \ + bcm96858.dtb \ + bcm963146.dtb \ +- bcm96856.dtb ++ bcm96856.dtb \ ++ bcm96813.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi +@@ -0,0 +1,128 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm6813", "brcm,bcmbca"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ interrupt-parent = <&gic>; ++ ++ cpus { ++ #address-cells = <2>; ++ #size-cells = <0>; ++ ++ B53_0: cpu@0 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x0>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_1: cpu@1 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x1>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_2: cpu@2 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x2>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ B53_3: cpu@3 { ++ compatible = "brcm,brahma-b53"; ++ device_type = "cpu"; ++ reg = <0x0 0x3>; ++ next-level-cache = <&L2_0>; ++ enable-method = "psci"; ++ }; ++ ++ L2_0: l2-cache0 { ++ compatible = "cache"; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu: pmu { ++ compatible = "arm,cortex-a53-pmu"; ++ interrupts = , ++ , ++ , ++ ; ++ interrupt-affinity = <&B53_0>, <&B53_1>, ++ <&B53_2>, <&B53_3>; ++ }; ++ ++ clocks: clocks { ++ periph_clk: periph-clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <200000000>; ++ }; ++ uart_clk: uart-clk { ++ compatible = "fixed-factor-clock"; ++ #clock-cells = <0>; ++ clocks = <&periph_clk>; ++ clock-div = <4>; ++ clock-mult = <1>; ++ }; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ axi@81000000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0x81000000 0x8000>; ++ ++ gic: interrupt-controller@1000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ interrupt-controller; ++ interrupts = ; ++ reg = <0x1000 0x1000>, ++ <0x2000 0x2000>, ++ <0x4000 0x2000>, ++ <0x6000 0x2000>; ++ }; ++ }; ++ ++ bus@ff800000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x0 0xff800000 0x800000>; ++ ++ uart0: serial@12000 { ++ compatible = "arm,pl011", "arm,primecell"; ++ reg = <0x12000 0x1000>; ++ interrupts = ; ++ clocks = <&uart_clk>, <&uart_clk>; ++ clock-names = "uartclk", "apb_pclk"; ++ status = "disabled"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts +@@ -0,0 +1,30 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm6813.dtsi" ++ ++/ { ++ model = "Broadcom BCM96813 Reference Board"; ++ compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0 0x08000000>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patchgit new file mode 100644 index 0000000000..d0d6151957 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0007-arm64-dts-broadcom-align-gpio-key-node-names-with-dt.patchgit @@ -0,0 +1,79 @@ +From ea559c81b61603d4044df6f826f10a832c42c98c Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Wed, 15 Jun 2022 17:52:59 -0700 +Subject: [PATCH] arm64: dts: broadcom: align gpio-key node names with dtschema + +The node names should be generic and DT schema expects certain pattern +(e.g. with key/button/switch). + +Signed-off-by: Krzysztof Kozlowski +Link: https://lore.kernel.org/r/20220616005333.18491-6-krzysztof.kozlowski@linaro.org +--- + .../broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 8 ++++---- + .../boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 8 ++++---- + 2 files changed, 8 insertions(+), 8 deletions(-) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +@@ -83,25 +83,25 @@ + compatible = "gpio-keys-polled"; + poll-interval = <100>; + +- brightness { ++ key-brightness { + label = "LEDs"; + linux,code = ; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ key-wps { + label = "WPS"; + linux,code = ; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + +- wifi { ++ key-wifi { + label = "WiFi"; + linux,code = ; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ key-restart { + label = "Reset"; + linux,code = ; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +@@ -18,25 +18,25 @@ + compatible = "gpio-keys-polled"; + poll-interval = <100>; + +- wifi { ++ key-wifi { + label = "WiFi"; + linux,code = ; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ key-wps { + label = "WPS"; + linux,code = ; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ key-restart { + label = "Reset"; + linux,code = ; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + +- brightness { ++ key-brightness { + label = "LEDs"; + linux,code = ; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit new file mode 100644 index 0000000000..59fbeea385 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit @@ -0,0 +1,33 @@ +From b4a544e415e9be33b37d9bfa9d9f9f4d13f553d6 Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Fri, 8 Jul 2022 11:25:06 -0700 +Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC + +The cpu mask value in interrupt property inherits from bcm4908.dtsi +which sets to four cpus. Correct the value to two cpus for dual core +BCM4906 SoC. + +Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files") +Signed-off-by: William Zhang +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi +@@ -17,6 +17,14 @@ + ; + }; + ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patchgit b/target/linux/bcm4908/patches-5.15/033-v6.0-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patchgit new file mode 100644 index 0000000000..6f71c8b5fb --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patchgit @@ -0,0 +1,54 @@ +From f3f575c4bef95384e68de552c7b29938fd0d9201 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 13 Jul 2022 22:03:51 +0200 +Subject: [PATCH] arm64: dts: Add base DTS file for bcmbca device Asus + GT-AX6000 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +It's a home router with 1 GiB of RAM, 6 Ethernet ports, 2 USB ports. + +Signed-off-by: Rafał Miłecki +Acked-by: William Zhang +Link: https://lore.kernel.org/r/20220713200351.28526-2-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 +++- + .../bcmbca/bcm4912-asus-gt-ax6000.dts | 19 +++++++++++++++++++ + 2 files changed, 22 insertions(+), 1 deletion(-) + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -1,5 +1,7 @@ + # SPDX-License-Identifier: GPL-2.0 +-dtb-$(CONFIG_ARCH_BCMBCA) += bcm94912.dtb \ ++dtb-$(CONFIG_ARCH_BCMBCA) += \ ++ bcm4912-asus-gt-ax6000.dtb \ ++ bcm94912.dtb \ + bcm963158.dtb \ + bcm96858.dtb \ + bcm963146.dtb \ +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts +@@ -0,0 +1,19 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++/dts-v1/; ++ ++#include "bcm4912.dtsi" ++ ++/ { ++ compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca"; ++ model = "Asus GT-AX6000"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x40000000>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm4908/patches-5.15/033-v6.0-0011-arm64-bcmbca-add-arch-bcmbca-machine-entry.patch b/target/linux/bcm4908/patches-5.15/033-v6.0-0011-arm64-bcmbca-add-arch-bcmbca-machine-entry.patch new file mode 100644 index 0000000000..603e30cb8a --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/033-v6.0-0011-arm64-bcmbca-add-arch-bcmbca-machine-entry.patch @@ -0,0 +1,31 @@ +From fdcd652ce2b6b819f5c4dc3cead5215c84ee6933 Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 1 Jun 2022 15:56:50 -0700 +Subject: [PATCH] arm64: bcmbca: add arch bcmbca machine entry + +Add ARCH_BCMBCA config for Broadcom Broadband SoC chipsets + +Signed-off-by: William Zhang +Signed-off-by: Florian Fainelli +--- + arch/arm64/Kconfig.platforms | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -65,6 +65,15 @@ config ARCH_BCM_IPROC + help + This enables support for Broadcom iProc based SoCs + ++config ARCH_BCMBCA ++ bool "Broadcom Broadband SoC" ++ help ++ Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based ++ BCA chipset. ++ ++ This enables support for Broadcom BCA ARM-based broadband chipsets, ++ including the DSL, PON and Wireless family of chips. ++ + config ARCH_BERLIN + bool "Marvell Berlin SoC Family" + select DW_APB_ICTL diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch new file mode 100644 index 0000000000..437249f2cb --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch @@ -0,0 +1,115 @@ +From 456b6dd1baadd2da10e28ffd1717b06d1fa17a97 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 18 Jul 2022 15:20:58 +0200 +Subject: [PATCH] arm64: dts: broadcom: bcm4908: add remaining LED pins +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Include all 32 pins. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20220718132100.13277-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 75 +++++++++++++++++++ + 1 file changed, 75 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +@@ -352,6 +352,61 @@ + groups = "led_9_grp_a"; + }; + ++ pins_led_10_a: led_10-a-pins { ++ function = "led_10"; ++ groups = "led_10_grp_a"; ++ }; ++ ++ pins_led_11_a: led_11-a-pins { ++ function = "led_11"; ++ groups = "led_11_grp_a"; ++ }; ++ ++ pins_led_12_a: led_12-a-pins { ++ function = "led_12"; ++ groups = "led_12_grp_a"; ++ }; ++ ++ pins_led_13_a: led_13-a-pins { ++ function = "led_13"; ++ groups = "led_13_grp_a"; ++ }; ++ ++ pins_led_14_a: led_14-a-pins { ++ function = "led_14"; ++ groups = "led_14_grp_a"; ++ }; ++ ++ pins_led_15_a: led_15-a-pins { ++ function = "led_15"; ++ groups = "led_15_grp_a"; ++ }; ++ ++ pins_led_16_a: led_16-a-pins { ++ function = "led_16"; ++ groups = "led_16_grp_a"; ++ }; ++ ++ pins_led_17_a: led_17-a-pins { ++ function = "led_17"; ++ groups = "led_17_grp_a"; ++ }; ++ ++ pins_led_18_a: led_18-a-pins { ++ function = "led_18"; ++ groups = "led_18_grp_a"; ++ }; ++ ++ pins_led_19_a: led_19-a-pins { ++ function = "led_19"; ++ groups = "led_19_grp_a"; ++ }; ++ ++ pins_led_20_a: led_20-a-pins { ++ function = "led_20"; ++ groups = "led_20_grp_a"; ++ }; ++ + pins_led_21_a: led_21-a-pins { + function = "led_21"; + groups = "led_21_grp_a"; +@@ -362,6 +417,21 @@ + groups = "led_22_grp_a"; + }; + ++ pins_led_23_a: led_23-a-pins { ++ function = "led_23"; ++ groups = "led_23_grp_a"; ++ }; ++ ++ pins_led_24_a: led_24-a-pins { ++ function = "led_24"; ++ groups = "led_24_grp_a"; ++ }; ++ ++ pins_led_25_a: led_25-a-pins { ++ function = "led_25"; ++ groups = "led_25_grp_a"; ++ }; ++ + pins_led_26_a: led_26-a-pins { + function = "led_26"; + groups = "led_26_grp_a"; +@@ -387,6 +457,11 @@ + groups = "led_30_grp_a"; + }; + ++ pins_led_31_a: led_31-a-pins { ++ function = "led_31"; ++ groups = "led_31_grp_a"; ++ }; ++ + pins_hs_uart: hs_uart-pins { + function = "hs_uart"; + groups = "hs_uart_grp"; diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch new file mode 100644 index 0000000000..c890340893 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch @@ -0,0 +1,35 @@ +From 7de56b1dc1149c702d4cc1e89ccc251bfb2bc246 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 18 Jul 2022 15:20:59 +0200 +Subject: [PATCH] arm64: dts: broadcom: bcm4908: add LEDs controller block +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 includes LEDs controller that supports multiple brightness +levels & hardware blinking. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20220718132100.13277-2-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +@@ -517,6 +517,14 @@ + status = "okay"; + }; + ++ leds: leds@800 { ++ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; ++ reg = <0x800 0xdc>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ + nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch new file mode 100644 index 0000000000..3888efb66b --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch @@ -0,0 +1,81 @@ +From 3bcae3396e986b4ab97a69e8de517e32f9691a4b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 18 Jul 2022 15:21:00 +0200 +Subject: [PATCH] arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +There are 5 software-controllable LEDs on PCB. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20220718132100.13277-3-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../bcm4908/bcm4908-asus-gt-ac5300.dts | 48 +++++++++++++++++++ + 1 file changed, 48 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +@@ -2,6 +2,7 @@ + + #include + #include ++#include + + #include "bcm4908.dtsi" + +@@ -118,6 +119,53 @@ + }; + }; + ++&leds { ++ led-power@11 { ++ reg = <0x11>; ++ function = LED_FUNCTION_POWER; ++ color = ; ++ default-state = "on"; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_17_a>; ++ }; ++ ++ led-wan-red@12 { ++ reg = <0x12>; ++ function = LED_FUNCTION_WAN; ++ color = ; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_18_a>; ++ }; ++ ++ led-wps@14 { ++ reg = <0x14>; ++ function = LED_FUNCTION_WPS; ++ color = ; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_20_a>; ++ }; ++ ++ led-wan-white@15 { ++ reg = <0x15>; ++ function = LED_FUNCTION_WAN; ++ color = ; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_21_a>; ++ }; ++ ++ led-lan@19 { ++ reg = <0x19>; ++ function = LED_FUNCTION_LAN; ++ color = ; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_25_a>; ++ }; ++}; ++ + &nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch new file mode 100644 index 0000000000..d4b7a983de --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch @@ -0,0 +1,66 @@ +From 4fdcbde682291fba2c3f45a41decd656d92a314f Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 3 Aug 2022 10:54:49 -0700 +Subject: [PATCH] arm64: dts: bcmbca: update BCM4908 board dts files +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Append "brcm,bcmbca" to compatible strings based on the new bcmbca +binding rule for BCM4908 family based boards. + +Signed-off-by: William Zhang +Acked-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20220803175455.47638-4-william.zhang@broadcom.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 2 +- + .../dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 2 +- + arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 2 +- + .../arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts | 2 +- + 4 files changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +@@ -7,7 +7,7 @@ + #include "bcm4906.dtsi" + + / { +- compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908"; ++ compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; + model = "Netgear R8000P"; + + memory@0 { +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +@@ -7,7 +7,7 @@ + #include "bcm4906.dtsi" + + / { +- compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; ++ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; + model = "TP-Link Archer C2300 V1"; + + memory@0 { +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +@@ -7,7 +7,7 @@ + #include "bcm4908.dtsi" + + / { +- compatible = "asus,gt-ac5300", "brcm,bcm4908"; ++ compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; + model = "Asus GT-AC5300"; + + memory@0 { +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts ++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts +@@ -3,7 +3,7 @@ + #include "bcm4908.dtsi" + + / { +- compatible = "netgear,raxe500", "brcm,bcm4908"; ++ compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; + model = "Netgear RAXE500"; + + memory@0 { diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch new file mode 100644 index 0000000000..21454a8652 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch @@ -0,0 +1,85 @@ +From ded8f22945899f4e87dd6d952bbc4abce6e64b7e Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 3 Aug 2022 10:54:50 -0700 +Subject: [PATCH] arm64: dts: Move BCM4908 dts to bcmbca folder + +As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts +files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the +BCM4908 board dts. Delete bcm4908 folder and its makefile as well. + +Signed-off-by: William Zhang +Link: https://lore.kernel.org/r/20220803175455.47638-5-william.zhang@broadcom.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/Makefile | 1 - + arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 5 ----- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 ++++ + .../broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts | 0 + .../{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts | 0 + .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0 + .../broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts | 0 + .../broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts | 0 + .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0 + 9 files changed, 4 insertions(+), 6 deletions(-) + delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (100%) + rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%) + +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -6,7 +6,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rp + bcm2837-rpi-3-b-plus.dtb \ + bcm2837-rpi-cm3-io3.dtb + +-subdir-y += bcm4908 + subdir-y += bcmbca + subdir-y += northstar2 + subdir-y += stingray +--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile ++++ /dev/null +@@ -1,5 +0,0 @@ +-# SPDX-License-Identifier: GPL-2.0 +-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb +-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb +-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb +-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -1,5 +1,9 @@ + # SPDX-License-Identifier: GPL-2.0 + dtb-$(CONFIG_ARCH_BCMBCA) += \ ++ bcm4906-netgear-r8000p.dtb \ ++ bcm4906-tplink-archer-c2300-v1.dtb \ ++ bcm4908-asus-gt-ac5300.dtb \ ++ bcm4908-netgear-raxe500.dtb \ + bcm4912-asus-gt-ax6000.dtb \ + bcm94912.dtb \ + bcm963158.dtb \ +diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts +similarity index 100% +rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts +diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts +similarity index 100% +rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts +diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi +similarity index 100% +rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi +rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi +diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts +similarity index 100% +rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts +diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts +similarity index 100% +rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts +rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts +diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +similarity index 100% +rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi diff --git a/target/linux/bcm4908/patches-5.15/034-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch b/target/linux/bcm4908/patches-5.15/034-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch new file mode 100644 index 0000000000..b19c5d33b4 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/034-v6.1-0006-arm64-dts-Add-BCM4908-generic-board-dts.patch @@ -0,0 +1,62 @@ +From 72e0bdb6d7edb1785d58f2e8e7c80e1d2f93a319 Mon Sep 17 00:00:00 2001 +From: William Zhang +Date: Wed, 3 Aug 2022 10:54:51 -0700 +Subject: [PATCH] arm64: dts: Add BCM4908 generic board dts + +Add generic bare bone bcm94908.dts file to support any 4908 based +design. It supports cpu subsystem, memory and an uart console. This can +be useful for board bring-up and cpu subsystem and memory related kernel +test as well. + +Signed-off-by: William Zhang +Link: https://lore.kernel.org/r/20220803175455.47638-6-william.zhang@broadcom.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 1 + + .../boot/dts/broadcom/bcmbca/bcm94908.dts | 30 +++++++++++++++++++ + 2 files changed, 31 insertions(+) + create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm4906-tplink-archer-c2300-v1.dtb \ + bcm4908-asus-gt-ac5300.dtb \ + bcm4908-netgear-raxe500.dtb \ ++ bcm94908.dtb \ + bcm4912-asus-gt-ax6000.dtb \ + bcm94912.dtb \ + bcm963158.dtb \ +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts +@@ -0,0 +1,30 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright 2022 Broadcom Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4908.dtsi" ++ ++/ { ++ model = "Broadcom BCM94908 Reference Board"; ++ compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0 0x0 0x08000000>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm4908/patches-5.15/035-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch b/target/linux/bcm4908/patches-5.15/035-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch new file mode 100644 index 0000000000..a3f49ca440 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/035-v6.2-0001-arm64-dts-broadcom-bcmbca-bcm4908-add-TWD-block-time.patch @@ -0,0 +1,31 @@ +From 68064196cffea33f090bd2e8d81cd5e20107ecf1 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 3 Nov 2022 11:53:16 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add TWD block timer +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 TWD contains block with 4 timers. Add binding for it. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20221103105316.21294-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +@@ -283,6 +283,11 @@ + #address-cells = <1>; + #size-cells = <1>; + ++ timer@0 { ++ compatible = "brcm,bcm63138-timer"; ++ reg = <0x0 0x28>; ++ }; ++ + watchdog@28 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x28 0x8>; diff --git a/target/linux/bcm4908/patches-5.15/035-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch b/target/linux/bcm4908/patches-5.15/035-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch new file mode 100644 index 0000000000..e8e81ae544 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/035-v6.2-0002-arm64-dts-broadcom-bcmbca-bcm6858-add-TWD-block.patch @@ -0,0 +1,46 @@ +From 4f9fb09175e87a233787a2dee1e5dabb14deb022 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 3 Nov 2022 12:00:15 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm6858: add TWD block +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM6858 contains TWD block with timers, watchdog, and reset subblocks. +Describe it. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20221103110015.21761-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../boot/dts/broadcom/bcmbca/bcm6858.dtsi | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi +@@ -109,6 +109,25 @@ + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x62000>; + ++ twd: timer-mfd@400 { ++ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; ++ reg = <0x400 0x4c>; ++ ranges = <0x0 0x400 0x4c>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ timer@0 { ++ compatible = "brcm,bcm63138-timer"; ++ reg = <0x0 0x28>; ++ }; ++ ++ watchdog@28 { ++ compatible = "brcm,bcm6345-wdt"; ++ reg = <0x28 0x8>; ++ }; ++ }; ++ + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; diff --git a/target/linux/bcm4908/patches-5.15/040-v6.1-mtd-parsers-add-Broadcom-s-U-Boot-parser.patch b/target/linux/bcm4908/patches-5.15/040-v6.1-mtd-parsers-add-Broadcom-s-U-Boot-parser.patch new file mode 100644 index 0000000000..4d4059b17f --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/040-v6.1-mtd-parsers-add-Broadcom-s-U-Boot-parser.patch @@ -0,0 +1,137 @@ +From 002181f5b150e60c77f21de7ad4dd10e4614cd91 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 11 Jul 2022 17:30:41 +0200 +Subject: [PATCH] mtd: parsers: add Broadcom's U-Boot parser +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Broadcom stores environment variables blocks inside U-Boot partition +itself. This driver finds & registers them. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20220711153041.6036-2-zajec5@gmail.com +--- + drivers/mtd/parsers/Kconfig | 10 ++++ + drivers/mtd/parsers/Makefile | 1 + + drivers/mtd/parsers/brcm_u-boot.c | 84 +++++++++++++++++++++++++++++++ + 3 files changed, 95 insertions(+) + create mode 100644 drivers/mtd/parsers/brcm_u-boot.c + +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -20,6 +20,16 @@ config MTD_BCM63XX_PARTS + This provides partition parsing for BCM63xx devices with CFE + bootloaders. + ++config MTD_BRCM_U_BOOT ++ tristate "Broadcom's U-Boot partition parser" ++ depends on ARCH_BCM4908 || COMPILE_TEST ++ help ++ Broadcom uses a custom way of storing U-Boot environment variables. ++ They are placed inside U-Boot partition itself at unspecified offset. ++ It's possible to locate them by looking for a custom header with a ++ magic value. This driver does that and creates subpartitions for ++ each found environment variables block. ++ + config MTD_CMDLINE_PARTS + tristate "Command line partition table parsing" + depends on MTD +--- a/drivers/mtd/parsers/Makefile ++++ b/drivers/mtd/parsers/Makefile +@@ -2,6 +2,7 @@ + obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o ++obj-$(CONFIG_MTD_BRCM_U_BOOT) += brcm_u-boot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o + obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o +--- /dev/null ++++ b/drivers/mtd/parsers/brcm_u-boot.c +@@ -0,0 +1,84 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Copyright © 2022 Rafał Miłecki ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#define BRCM_U_BOOT_MAX_OFFSET 0x200000 ++#define BRCM_U_BOOT_STEP 0x1000 ++ ++#define BRCM_U_BOOT_MAX_PARTS 2 ++ ++#define BRCM_U_BOOT_MAGIC 0x75456e76 /* uEnv */ ++ ++struct brcm_u_boot_header { ++ __le32 magic; ++ __le32 length; ++} __packed; ++ ++static const char *names[BRCM_U_BOOT_MAX_PARTS] = { ++ "u-boot-env", ++ "u-boot-env-backup", ++}; ++ ++static int brcm_u_boot_parse(struct mtd_info *mtd, ++ const struct mtd_partition **pparts, ++ struct mtd_part_parser_data *data) ++{ ++ struct brcm_u_boot_header header; ++ struct mtd_partition *parts; ++ size_t bytes_read; ++ size_t offset; ++ int err; ++ int i = 0; ++ ++ parts = kcalloc(BRCM_U_BOOT_MAX_PARTS, sizeof(*parts), GFP_KERNEL); ++ if (!parts) ++ return -ENOMEM; ++ ++ for (offset = 0; ++ offset < min_t(size_t, mtd->size, BRCM_U_BOOT_MAX_OFFSET); ++ offset += BRCM_U_BOOT_STEP) { ++ err = mtd_read(mtd, offset, sizeof(header), &bytes_read, (uint8_t *)&header); ++ if (err && !mtd_is_bitflip(err)) { ++ pr_err("Failed to read from %s at 0x%zx: %d\n", mtd->name, offset, err); ++ continue; ++ } ++ ++ if (le32_to_cpu(header.magic) != BRCM_U_BOOT_MAGIC) ++ continue; ++ ++ parts[i].name = names[i]; ++ parts[i].offset = offset; ++ parts[i].size = sizeof(header) + le32_to_cpu(header.length); ++ i++; ++ pr_info("offset:0x%zx magic:0x%08x BINGO\n", offset, header.magic); ++ ++ if (i == BRCM_U_BOOT_MAX_PARTS) ++ break; ++ } ++ ++ *pparts = parts; ++ ++ return i; ++}; ++ ++static const struct of_device_id brcm_u_boot_of_match_table[] = { ++ { .compatible = "brcm,u-boot" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, brcm_u_boot_of_match_table); ++ ++static struct mtd_part_parser brcm_u_boot_mtd_parser = { ++ .parse_fn = brcm_u_boot_parse, ++ .name = "brcm_u-boot", ++ .of_match_table = brcm_u_boot_of_match_table, ++}; ++module_mtd_part_parser(brcm_u_boot_mtd_parser); ++ ++MODULE_LICENSE("GPL"); diff --git a/target/linux/bcm4908/patches-5.15/070-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch b/target/linux/bcm4908/patches-5.15/070-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch new file mode 100644 index 0000000000..fd0b13c17b --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/070-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch @@ -0,0 +1,209 @@ +From af30f8eaa8fe4ff1987280f716309711997bd979 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 29 Dec 2021 18:16:42 +0100 +Subject: [PATCH] net: dsa: bcm_sf2: refactor LED regs access +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs. +2. Add helper for handling non-lineral port <-> reg mappings. +3. Add support for 12 B LED reg blocks on BCM4908 (different layout) + +Complete support for LEDs setup will be implemented once Linux receives +a proper design & implementation for "hardware" LEDs. + +Signed-off-by: Rafał Miłecki +Acked-by: Florian Fainelli +Link: https://lore.kernel.org/r/20211229171642.22942-1-zajec5@gmail.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/bcm_sf2.c | 54 ++++++++++++++++++++++++---- + drivers/net/dsa/bcm_sf2.h | 10 ++++++ + drivers/net/dsa/bcm_sf2_regs.h | 65 +++++++++++++++++++++++++++++++--- + 3 files changed, 119 insertions(+), 10 deletions(-) + +--- a/drivers/net/dsa/bcm_sf2.c ++++ b/drivers/net/dsa/bcm_sf2.c +@@ -62,6 +62,38 @@ static u16 bcm_sf2_reg_rgmii_cntrl(struc + return REG_SWITCH_STATUS; + } + ++static u16 bcm_sf2_reg_led_base(struct bcm_sf2_priv *priv, int port) ++{ ++ switch (port) { ++ case 0: ++ return REG_LED_0_CNTRL; ++ case 1: ++ return REG_LED_1_CNTRL; ++ case 2: ++ return REG_LED_2_CNTRL; ++ } ++ ++ switch (priv->type) { ++ case BCM4908_DEVICE_ID: ++ switch (port) { ++ case 3: ++ return REG_LED_3_CNTRL; ++ case 7: ++ return REG_LED_4_CNTRL; ++ default: ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ WARN_ONCE(1, "Unsupported port %d\n", port); ++ ++ /* RO fallback reg */ ++ return REG_SWITCH_STATUS; ++} ++ + /* Return the number of active ports, not counting the IMP (CPU) port */ + static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds) + { +@@ -187,9 +219,14 @@ static void bcm_sf2_gphy_enable_set(stru + + /* Use PHY-driven LED signaling */ + if (!enable) { +- reg = reg_readl(priv, REG_LED_CNTRL(0)); +- reg |= SPDLNK_SRC_SEL; +- reg_writel(priv, reg, REG_LED_CNTRL(0)); ++ u16 led_ctrl = bcm_sf2_reg_led_base(priv, 0); ++ ++ if (priv->type == BCM7278_DEVICE_ID || ++ priv->type == BCM7445_DEVICE_ID) { ++ reg = reg_led_readl(priv, led_ctrl, 0); ++ reg |= LED_CNTRL_SPDLNK_SRC_SEL; ++ reg_led_writel(priv, reg, led_ctrl, 0); ++ } + } + } + +@@ -1241,9 +1278,14 @@ static const u16 bcm_sf2_4908_reg_offset + [REG_SPHY_CNTRL] = 0x24, + [REG_CROSSBAR] = 0xc8, + [REG_RGMII_11_CNTRL] = 0x014c, +- [REG_LED_0_CNTRL] = 0x40, +- [REG_LED_1_CNTRL] = 0x4c, +- [REG_LED_2_CNTRL] = 0x58, ++ [REG_LED_0_CNTRL] = 0x40, ++ [REG_LED_1_CNTRL] = 0x4c, ++ [REG_LED_2_CNTRL] = 0x58, ++ [REG_LED_3_CNTRL] = 0x64, ++ [REG_LED_4_CNTRL] = 0x88, ++ [REG_LED_5_CNTRL] = 0xa0, ++ [REG_LED_AGGREGATE_CTRL] = 0xb8, ++ + }; + + static const struct bcm_sf2_of_data bcm_sf2_4908_data = { +--- a/drivers/net/dsa/bcm_sf2.h ++++ b/drivers/net/dsa/bcm_sf2.h +@@ -210,6 +210,16 @@ SF2_IO_MACRO(acb); + SWITCH_INTR_L2(0); + SWITCH_INTR_L2(1); + ++static inline u32 reg_led_readl(struct bcm_sf2_priv *priv, u16 off, u16 reg) ++{ ++ return readl_relaxed(priv->reg + priv->reg_offsets[off] + reg); ++} ++ ++static inline void reg_led_writel(struct bcm_sf2_priv *priv, u32 val, u16 off, u16 reg) ++{ ++ writel_relaxed(val, priv->reg + priv->reg_offsets[off] + reg); ++} ++ + /* RXNFC */ + int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port, + struct ethtool_rxnfc *nfc, u32 *rule_locs); +--- a/drivers/net/dsa/bcm_sf2_regs.h ++++ b/drivers/net/dsa/bcm_sf2_regs.h +@@ -25,6 +25,10 @@ enum bcm_sf2_reg_offs { + REG_LED_0_CNTRL, + REG_LED_1_CNTRL, + REG_LED_2_CNTRL, ++ REG_LED_3_CNTRL, ++ REG_LED_4_CNTRL, ++ REG_LED_5_CNTRL, ++ REG_LED_AGGREGATE_CTRL, + REG_SWITCH_REG_MAX, + }; + +@@ -56,6 +60,63 @@ enum bcm_sf2_reg_offs { + #define CROSSBAR_BCM4908_EXT_GPHY4 1 + #define CROSSBAR_BCM4908_EXT_RGMII 2 + ++/* Relative to REG_LED_*_CNTRL (BCM7278, BCM7445) */ ++#define LED_CNTRL_NO_LINK_ENCODE_SHIFT 0 ++#define LED_CNTRL_M10_ENCODE_SHIFT 2 ++#define LED_CNTRL_M100_ENCODE_SHIFT 4 ++#define LED_CNTRL_M1000_ENCODE_SHIFT 6 ++#define LED_CNTRL_SEL_NO_LINK_ENCODE_SHIFT 8 ++#define LED_CNTRL_SEL_10M_ENCODE_SHIFT 10 ++#define LED_CNTRL_SEL_100M_ENCODE_SHIFT 12 ++#define LED_CNTRL_SEL_1000M_ENCODE_SHIFT 14 ++#define LED_CNTRL_RX_DV_EN (1 << 16) ++#define LED_CNTRL_TX_EN_EN (1 << 17) ++#define LED_CNTRL_SPDLNK_LED0_ACT_SEL_SHIFT 18 ++#define LED_CNTRL_SPDLNK_LED1_ACT_SEL_SHIFT 20 ++#define LED_CNTRL_ACT_LED_ACT_SEL_SHIFT 22 ++#define LED_CNTRL_SPDLNK_SRC_SEL (1 << 24) ++#define LED_CNTRL_SPDLNK_LED0_ACT_POL_SEL (1 << 25) ++#define LED_CNTRL_SPDLNK_LED1_ACT_POL_SEL (1 << 26) ++#define LED_CNTRL_ACT_LED_POL_SEL (1 << 27) ++#define LED_CNTRL_MASK 0x3 ++ ++/* Register relative to REG_LED_*_CNTRL (BCM4908) */ ++#define REG_LED_CTRL 0x0 ++#define LED_CTRL_RX_ACT_EN 0x00000001 ++#define LED_CTRL_TX_ACT_EN 0x00000002 ++#define LED_CTRL_SPDLNK_LED0_ACT_SEL 0x00000004 ++#define LED_CTRL_SPDLNK_LED1_ACT_SEL 0x00000008 ++#define LED_CTRL_SPDLNK_LED2_ACT_SEL 0x00000010 ++#define LED_CTRL_ACT_LED_ACT_SEL 0x00000020 ++#define LED_CTRL_SPDLNK_LED0_ACT_POL_SEL 0x00000040 ++#define LED_CTRL_SPDLNK_LED1_ACT_POL_SEL 0x00000080 ++#define LED_CTRL_SPDLNK_LED2_ACT_POL_SEL 0x00000100 ++#define LED_CTRL_ACT_LED_POL_SEL 0x00000200 ++#define LED_CTRL_LED_SPD_OVRD 0x00001c00 ++#define LED_CTRL_LNK_STATUS_OVRD 0x00002000 ++#define LED_CTRL_SPD_OVRD_EN 0x00004000 ++#define LED_CTRL_LNK_OVRD_EN 0x00008000 ++ ++/* Register relative to REG_LED_*_CNTRL (BCM4908) */ ++#define REG_LED_LINK_SPEED_ENC_SEL 0x4 ++#define LED_LINK_SPEED_ENC_SEL_NO_LINK_SHIFT 0 ++#define LED_LINK_SPEED_ENC_SEL_10M_SHIFT 3 ++#define LED_LINK_SPEED_ENC_SEL_100M_SHIFT 6 ++#define LED_LINK_SPEED_ENC_SEL_1000M_SHIFT 9 ++#define LED_LINK_SPEED_ENC_SEL_2500M_SHIFT 12 ++#define LED_LINK_SPEED_ENC_SEL_10G_SHIFT 15 ++#define LED_LINK_SPEED_ENC_SEL_MASK 0x7 ++ ++/* Register relative to REG_LED_*_CNTRL (BCM4908) */ ++#define REG_LED_LINK_SPEED_ENC 0x8 ++#define LED_LINK_SPEED_ENC_NO_LINK_SHIFT 0 ++#define LED_LINK_SPEED_ENC_M10_SHIFT 3 ++#define LED_LINK_SPEED_ENC_M100_SHIFT 6 ++#define LED_LINK_SPEED_ENC_M1000_SHIFT 9 ++#define LED_LINK_SPEED_ENC_M2500_SHIFT 12 ++#define LED_LINK_SPEED_ENC_M10G_SHIFT 15 ++#define LED_LINK_SPEED_ENC_MASK 0x7 ++ + /* Relative to REG_RGMII_CNTRL */ + #define RGMII_MODE_EN (1 << 0) + #define ID_MODE_DIS (1 << 1) +@@ -73,10 +134,6 @@ enum bcm_sf2_reg_offs { + #define LPI_COUNT_SHIFT 9 + #define LPI_COUNT_MASK 0x3F + +-#define REG_LED_CNTRL(x) (REG_LED_0_CNTRL + (x)) +- +-#define SPDLNK_SRC_SEL (1 << 24) +- + /* Register set relative to 'INTRL2_0' and 'INTRL2_1' */ + #define INTRL2_CPU_STATUS 0x00 + #define INTRL2_CPU_SET 0x04 diff --git a/target/linux/bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch b/target/linux/bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch new file mode 100644 index 0000000000..1cf761838c --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch @@ -0,0 +1,53 @@ +From e93a766da57fff3273bcb618edf5dfca1fb86b89 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 15 Sep 2022 15:30:13 +0200 +Subject: [PATCH] net: broadcom: bcm4908_enet: handle -EPROBE_DEFER when + getting MAC +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Reading MAC from OF may return -EPROBE_DEFER if underlaying NVMEM device +isn't ready yet. In such case pass that error code up and "wait" to be +probed later. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20220915133013.2243-1-zajec5@gmail.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/broadcom/bcm4908_enet.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/broadcom/bcm4908_enet.c ++++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c +@@ -720,6 +720,8 @@ static int bcm4908_enet_probe(struct pla + + SET_NETDEV_DEV(netdev, &pdev->dev); + err = of_get_mac_address(dev->of_node, netdev->dev_addr); ++ if (err == -EPROBE_DEFER) ++ goto err_dma_free; + if (err) + eth_hw_addr_random(netdev); + netdev->netdev_ops = &bcm4908_enet_netdev_ops; +@@ -730,14 +732,17 @@ static int bcm4908_enet_probe(struct pla + netif_napi_add(netdev, &enet->rx_ring.napi, bcm4908_enet_poll_rx, NAPI_POLL_WEIGHT); + + err = register_netdev(netdev); +- if (err) { +- bcm4908_enet_dma_free(enet); +- return err; +- } ++ if (err) ++ goto err_dma_free; + + platform_set_drvdata(pdev, enet); + + return 0; ++ ++err_dma_free: ++ bcm4908_enet_dma_free(enet); ++ ++ return err; + } + + static int bcm4908_enet_remove(struct platform_device *pdev) diff --git a/target/linux/bcm4908/patches-5.15/072-v6.2-0001-net-broadcom-bcm4908_enet-use-build_skb.patch b/target/linux/bcm4908/patches-5.15/072-v6.2-0001-net-broadcom-bcm4908_enet-use-build_skb.patch new file mode 100644 index 0000000000..1b4cc9e24c --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/072-v6.2-0001-net-broadcom-bcm4908_enet-use-build_skb.patch @@ -0,0 +1,152 @@ +From 3a1cc23a75abcd9cea585eb84846507363d58397 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 25 Oct 2022 15:22:45 +0200 +Subject: [PATCH] net: broadcom: bcm4908_enet: use build_skb() +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +RX code can be more efficient with the build_skb(). Allocating actual +SKB around eth packet buffer - right before passing it up - results in +a better cache usage. + +Without RPS (echo 0 > rps_cpus) BCM4908 NAT masq performance "jumps" +between two speeds: ~900 Mbps and 940 Mbps (it's a 4 CPUs SoC). This +change bumps the lower speed from 905 Mb/s to 918 Mb/s (tested using +single stream iperf 2.0.5 traffic). + +There are more optimizations to consider. One obvious to try is GRO +however as BCM4908 doesn't do hw csum is may actually lower performance. +Sometimes. Some early testing: + +┌─────────────────────────────────┬─────────────────────┬────────────────────┐ +│ │ netif_receive_skb() │ napi_gro_receive() │ +├─────────────────────────────────┼─────────────────────┼────────────────────┤ +│ netdev_alloc_skb() │ 905 Mb/s │ 892 Mb/s │ +│ napi_alloc_frag() + build_skb() │ 918 Mb/s │ 917 Mb/s │ +└─────────────────────────────────┴─────────────────────┴────────────────────┘ + +Another ideas: +1. napi_build_skb() +2. skb_copy_from_linear_data() for small packets + +Those need proper testing first though. That can be done later. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20221025132245.22871-1-zajec5@gmail.com +Signed-off-by: Paolo Abeni +--- + drivers/net/ethernet/broadcom/bcm4908_enet.c | 53 +++++++++++++------- + 1 file changed, 36 insertions(+), 17 deletions(-) + +--- a/drivers/net/ethernet/broadcom/bcm4908_enet.c ++++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c +@@ -36,13 +36,24 @@ + #define ENET_MAX_ETH_OVERHEAD (ETH_HLEN + BRCM_MAX_TAG_LEN + VLAN_HLEN + \ + ETH_FCS_LEN + 4) /* 32 */ + ++#define ENET_RX_SKB_BUF_SIZE (NET_SKB_PAD + NET_IP_ALIGN + \ ++ ETH_HLEN + BRCM_MAX_TAG_LEN + VLAN_HLEN + \ ++ ENET_MTU_MAX + ETH_FCS_LEN + 4) ++#define ENET_RX_SKB_BUF_ALLOC_SIZE (SKB_DATA_ALIGN(ENET_RX_SKB_BUF_SIZE) + \ ++ SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) ++#define ENET_RX_BUF_DMA_OFFSET (NET_SKB_PAD + NET_IP_ALIGN) ++#define ENET_RX_BUF_DMA_SIZE (ENET_RX_SKB_BUF_SIZE - ENET_RX_BUF_DMA_OFFSET) ++ + struct bcm4908_enet_dma_ring_bd { + __le32 ctl; + __le32 addr; + } __packed; + + struct bcm4908_enet_dma_ring_slot { +- struct sk_buff *skb; ++ union { ++ void *buf; /* RX */ ++ struct sk_buff *skb; /* TX */ ++ }; + unsigned int len; + dma_addr_t dma_addr; + }; +@@ -260,22 +271,21 @@ static int bcm4908_enet_dma_alloc_rx_buf + u32 tmp; + int err; + +- slot->len = ENET_MTU_MAX + ENET_MAX_ETH_OVERHEAD; +- +- slot->skb = netdev_alloc_skb(enet->netdev, slot->len); +- if (!slot->skb) ++ slot->buf = napi_alloc_frag(ENET_RX_SKB_BUF_ALLOC_SIZE); ++ if (!slot->buf) + return -ENOMEM; + +- slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE); ++ slot->dma_addr = dma_map_single(dev, slot->buf + ENET_RX_BUF_DMA_OFFSET, ++ ENET_RX_BUF_DMA_SIZE, DMA_FROM_DEVICE); + err = dma_mapping_error(dev, slot->dma_addr); + if (err) { + dev_err(dev, "Failed to map DMA buffer: %d\n", err); +- kfree_skb(slot->skb); +- slot->skb = NULL; ++ skb_free_frag(slot->buf); ++ slot->buf = NULL; + return err; + } + +- tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT; ++ tmp = ENET_RX_BUF_DMA_SIZE << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT; + tmp |= DMA_CTL_STATUS_OWN; + if (idx == enet->rx_ring.length - 1) + tmp |= DMA_CTL_STATUS_WRAP; +@@ -315,11 +325,11 @@ static void bcm4908_enet_dma_uninit(stru + + for (i = rx_ring->length - 1; i >= 0; i--) { + slot = &rx_ring->slots[i]; +- if (!slot->skb) ++ if (!slot->buf) + continue; + dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE); +- kfree_skb(slot->skb); +- slot->skb = NULL; ++ skb_free_frag(slot->buf); ++ slot->buf = NULL; + } + } + +@@ -575,6 +585,7 @@ static int bcm4908_enet_poll_rx(struct n + while (handled < weight) { + struct bcm4908_enet_dma_ring_bd *buf_desc; + struct bcm4908_enet_dma_ring_slot slot; ++ struct sk_buff *skb; + u32 ctl; + int len; + int err; +@@ -598,16 +609,24 @@ static int bcm4908_enet_poll_rx(struct n + + if (len < ETH_ZLEN || + (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) { +- kfree_skb(slot.skb); ++ skb_free_frag(slot.buf); + enet->netdev->stats.rx_dropped++; + break; + } + +- dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE); ++ dma_unmap_single(dev, slot.dma_addr, ENET_RX_BUF_DMA_SIZE, DMA_FROM_DEVICE); ++ ++ skb = build_skb(slot.buf, ENET_RX_SKB_BUF_ALLOC_SIZE); ++ if (unlikely(!skb)) { ++ skb_free_frag(slot.buf); ++ enet->netdev->stats.rx_dropped++; ++ break; ++ } ++ skb_reserve(skb, ENET_RX_BUF_DMA_OFFSET); ++ skb_put(skb, len - ETH_FCS_LEN); ++ skb->protocol = eth_type_trans(skb, enet->netdev); + +- skb_put(slot.skb, len - ETH_FCS_LEN); +- slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev); +- netif_receive_skb(slot.skb); ++ netif_receive_skb(skb); + + enet->netdev->stats.rx_packets++; + enet->netdev->stats.rx_bytes += len; diff --git a/target/linux/bcm4908/patches-5.15/072-v6.2-0002-net-broadcom-bcm4908_enet-report-queued-and-transmit.patch b/target/linux/bcm4908/patches-5.15/072-v6.2-0002-net-broadcom-bcm4908_enet-report-queued-and-transmit.patch new file mode 100644 index 0000000000..fe85aefa7c --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/072-v6.2-0002-net-broadcom-bcm4908_enet-report-queued-and-transmit.patch @@ -0,0 +1,45 @@ +From 471ef777ec79baadc5cd9773d08f95f49cf5e2b1 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 31 Oct 2022 11:48:56 +0100 +Subject: [PATCH] net: broadcom: bcm4908_enet: report queued and transmitted + bytes +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This allows BQL to operate avoiding buffer bloat and reducing latency. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20221031104856.32388-1-zajec5@gmail.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/broadcom/bcm4908_enet.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/net/ethernet/broadcom/bcm4908_enet.c ++++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c +@@ -505,6 +505,7 @@ static int bcm4908_enet_stop(struct net_ + netif_carrier_off(netdev); + napi_disable(&rx_ring->napi); + napi_disable(&tx_ring->napi); ++ netdev_reset_queue(netdev); + + bcm4908_enet_dma_rx_ring_disable(enet, &enet->rx_ring); + bcm4908_enet_dma_tx_ring_disable(enet, &enet->tx_ring); +@@ -564,6 +565,8 @@ static int bcm4908_enet_start_xmit(struc + if (ring->write_idx + 1 == ring->length - 1) + tmp |= DMA_CTL_STATUS_WRAP; + ++ netdev_sent_queue(enet->netdev, skb->len); ++ + buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr); + buf_desc->ctl = cpu_to_le32(tmp); + +@@ -671,6 +674,7 @@ static int bcm4908_enet_poll_tx(struct n + tx_ring->read_idx = 0; + } + ++ netdev_completed_queue(enet->netdev, handled, bytes); + enet->netdev->stats.tx_packets += handled; + enet->netdev->stats.tx_bytes += bytes; + diff --git a/target/linux/bcm4908/patches-5.15/080-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch b/target/linux/bcm4908/patches-5.15/080-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch new file mode 100644 index 0000000000..946bc79b60 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/080-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch @@ -0,0 +1,111 @@ +From 7b5730f0ff24b0d7d1cb660a482384a807618a46 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 24 Jan 2022 11:22:42 +0100 +Subject: [PATCH] dt-bindings: pinctrl: Add binding for BCM4908 pinctrl +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +It's hardware block that is part of every SoC from BCM4908 family. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20220124102243.14912-1-zajec5@gmail.com +Signed-off-by: Linus Walleij +--- + .../pinctrl/brcm,bcm4908-pinctrl.yaml | 72 +++++++++++++++++++ + MAINTAINERS | 7 ++ + 2 files changed, 79 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml +@@ -0,0 +1,72 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM4908 pin controller ++ ++maintainers: ++ - Rafał Miłecki ++ ++description: ++ Binding for pin controller present on BCM4908 family SoCs. ++ ++properties: ++ compatible: ++ const: brcm,bcm4908-pinctrl ++ ++ reg: ++ maxItems: 1 ++ ++patternProperties: ++ '-pins$': ++ type: object ++ $ref: pinmux-node.yaml# ++ ++ properties: ++ function: ++ enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8, ++ led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16, ++ led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24, ++ led_25, led_26, led_27, led_28, led_29, led_30, led_31, ++ hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr, ++ usb1_pwr ] ++ ++ groups: ++ minItems: 1 ++ maxItems: 2 ++ items: ++ enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a, ++ led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a, ++ led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b, ++ led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b, ++ led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a, ++ led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a, ++ led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a, ++ led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a, ++ led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a, ++ led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp, ++ nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp, ++ usb1_pwr_grp ] ++ ++allOf: ++ - $ref: pinctrl.yaml# ++ ++required: ++ - compatible ++ - reg ++ ++unevaluatedProperties: false ++ ++examples: ++ - | ++ pinctrl@ff800560 { ++ compatible = "brcm,bcm4908-pinctrl"; ++ reg = <0xff800560 0x10>; ++ ++ led_0-a-pins { ++ function = "led_0"; ++ groups = "led_0_grp_a"; ++ }; ++ }; +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -3572,6 +3572,13 @@ F: Documentation/devicetree/bindings/net + F: drivers/net/ethernet/broadcom/bcm4908_enet.* + F: drivers/net/ethernet/broadcom/unimac.h + ++BROADCOM BCM4908 PINMUX DRIVER ++M: Rafał Miłecki ++M: bcm-kernel-feedback-list@broadcom.com ++L: linux-gpio@vger.kernel.org ++S: Maintained ++F: Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml ++ + BROADCOM BCM5301X ARM ARCHITECTURE + M: Hauke Mehrtens + M: Rafał Miłecki diff --git a/target/linux/bcm4908/patches-5.15/080-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch b/target/linux/bcm4908/patches-5.15/080-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch new file mode 100644 index 0000000000..5bd380f67a --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/080-v5.18-0002-pinctrl-bcm-add-driver-for-BCM4908-pinmux.patch @@ -0,0 +1,629 @@ +From f7e322d99f1180270fb4a3e1ae992b3116cfcf34 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 24 Jan 2022 11:22:43 +0100 +Subject: [PATCH] pinctrl: bcm: add driver for BCM4908 pinmux +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 has its own pins layout so it needs a custom binding and a Linux +driver. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Andy Shevchenko +Link: https://lore.kernel.org/r/20220124102243.14912-2-zajec5@gmail.com +Signed-off-by: Linus Walleij +--- + MAINTAINERS | 1 + + drivers/pinctrl/bcm/Kconfig | 14 + + drivers/pinctrl/bcm/Makefile | 1 + + drivers/pinctrl/bcm/pinctrl-bcm4908.c | 563 ++++++++++++++++++++++++++ + 4 files changed, 579 insertions(+) + create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm4908.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -3578,6 +3578,7 @@ M: bcm-kernel-feedback-list@broadcom.com + L: linux-gpio@vger.kernel.org + S: Maintained + F: Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml ++F: drivers/pinctrl/bcm/pinctrl-bcm4908.c + + BROADCOM BCM5301X ARM ARCHITECTURE + M: Hauke Mehrtens +--- a/drivers/pinctrl/bcm/Kconfig ++++ b/drivers/pinctrl/bcm/Kconfig +@@ -29,6 +29,20 @@ config PINCTRL_BCM2835 + help + Say Y here to enable the Broadcom BCM2835 GPIO driver. + ++config PINCTRL_BCM4908 ++ tristate "Broadcom BCM4908 pinmux driver" ++ depends on OF && (ARCH_BCM4908 || COMPILE_TEST) ++ select PINMUX ++ select PINCONF ++ select GENERIC_PINCONF ++ select GENERIC_PINCTRL_GROUPS ++ select GENERIC_PINMUX_FUNCTIONS ++ default ARCH_BCM4908 ++ help ++ Driver for BCM4908 family SoCs with integrated pin controller. ++ ++ If compiled as module it will be called pinctrl-bcm4908. ++ + config PINCTRL_BCM63XX + bool + select PINMUX +--- a/drivers/pinctrl/bcm/Makefile ++++ b/drivers/pinctrl/bcm/Makefile +@@ -3,6 +3,7 @@ + + obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o + obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o ++obj-$(CONFIG_PINCTRL_BCM4908) += pinctrl-bcm4908.o + obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o + obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o + obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o +--- /dev/null ++++ b/drivers/pinctrl/bcm/pinctrl-bcm4908.c +@@ -0,0 +1,560 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* Copyright (C) 2021 Rafał Miłecki */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../core.h" ++#include "../pinmux.h" ++ ++#define BCM4908_NUM_PINS 86 ++ ++#define BCM4908_TEST_PORT_BLOCK_EN_LSB 0x00 ++#define BCM4908_TEST_PORT_BLOCK_DATA_MSB 0x04 ++#define BCM4908_TEST_PORT_BLOCK_DATA_LSB 0x08 ++#define BCM4908_TEST_PORT_LSB_PINMUX_DATA_SHIFT 12 ++#define BCM4908_TEST_PORT_COMMAND 0x0c ++#define BCM4908_TEST_PORT_CMD_LOAD_MUX_REG 0x00000021 ++ ++struct bcm4908_pinctrl { ++ struct device *dev; ++ void __iomem *base; ++ struct mutex mutex; ++ struct pinctrl_dev *pctldev; ++ struct pinctrl_desc pctldesc; ++}; ++ ++/* ++ * Groups ++ */ ++ ++struct bcm4908_pinctrl_pin_setup { ++ unsigned int number; ++ unsigned int function; ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_0_pins_a[] = { ++ { 0, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_1_pins_a[] = { ++ { 1, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_2_pins_a[] = { ++ { 2, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_3_pins_a[] = { ++ { 3, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_4_pins_a[] = { ++ { 4, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_5_pins_a[] = { ++ { 5, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_6_pins_a[] = { ++ { 6, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_7_pins_a[] = { ++ { 7, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_8_pins_a[] = { ++ { 8, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_9_pins_a[] = { ++ { 9, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_10_pins_a[] = { ++ { 10, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_11_pins_a[] = { ++ { 11, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_12_pins_a[] = { ++ { 12, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_13_pins_a[] = { ++ { 13, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_14_pins_a[] = { ++ { 14, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_15_pins_a[] = { ++ { 15, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_16_pins_a[] = { ++ { 16, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_17_pins_a[] = { ++ { 17, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_18_pins_a[] = { ++ { 18, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_19_pins_a[] = { ++ { 19, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_20_pins_a[] = { ++ { 20, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_21_pins_a[] = { ++ { 21, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_22_pins_a[] = { ++ { 22, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_23_pins_a[] = { ++ { 23, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_24_pins_a[] = { ++ { 24, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_25_pins_a[] = { ++ { 25, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_26_pins_a[] = { ++ { 26, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_27_pins_a[] = { ++ { 27, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_28_pins_a[] = { ++ { 28, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_29_pins_a[] = { ++ { 29, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_30_pins_a[] = { ++ { 30, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_31_pins_a[] = { ++ { 31, 3 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_10_pins_b[] = { ++ { 8, 2 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_11_pins_b[] = { ++ { 9, 2 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_12_pins_b[] = { ++ { 0, 2 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_13_pins_b[] = { ++ { 1, 2 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup led_31_pins_b[] = { ++ { 30, 2 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup hs_uart_pins[] = { ++ { 10, 0 }, /* CTS */ ++ { 11, 0 }, /* RTS */ ++ { 12, 0 }, /* RXD */ ++ { 13, 0 }, /* TXD */ ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup i2c_pins_a[] = { ++ { 18, 0 }, /* SDA */ ++ { 19, 0 }, /* SCL */ ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup i2c_pins_b[] = { ++ { 22, 0 }, /* SDA */ ++ { 23, 0 }, /* SCL */ ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup i2s_pins[] = { ++ { 27, 0 }, /* MCLK */ ++ { 28, 0 }, /* LRCK */ ++ { 29, 0 }, /* SDATA */ ++ { 30, 0 }, /* SCLK */ ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup nand_ctrl_pins[] = { ++ { 32, 0 }, ++ { 33, 0 }, ++ { 34, 0 }, ++ { 43, 0 }, ++ { 44, 0 }, ++ { 45, 0 }, ++ { 56, 1 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup nand_data_pins[] = { ++ { 35, 0 }, ++ { 36, 0 }, ++ { 37, 0 }, ++ { 38, 0 }, ++ { 39, 0 }, ++ { 40, 0 }, ++ { 41, 0 }, ++ { 42, 0 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup emmc_ctrl_pins[] = { ++ { 46, 0 }, ++ { 47, 0 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup usb0_pwr_pins[] = { ++ { 63, 0 }, ++ { 64, 0 }, ++}; ++ ++static const struct bcm4908_pinctrl_pin_setup usb1_pwr_pins[] = { ++ { 66, 0 }, ++ { 67, 0 }, ++}; ++ ++struct bcm4908_pinctrl_grp { ++ const char *name; ++ const struct bcm4908_pinctrl_pin_setup *pins; ++ const unsigned int num_pins; ++}; ++ ++static const struct bcm4908_pinctrl_grp bcm4908_pinctrl_grps[] = { ++ { "led_0_grp_a", led_0_pins_a, ARRAY_SIZE(led_0_pins_a) }, ++ { "led_1_grp_a", led_1_pins_a, ARRAY_SIZE(led_1_pins_a) }, ++ { "led_2_grp_a", led_2_pins_a, ARRAY_SIZE(led_2_pins_a) }, ++ { "led_3_grp_a", led_3_pins_a, ARRAY_SIZE(led_3_pins_a) }, ++ { "led_4_grp_a", led_4_pins_a, ARRAY_SIZE(led_4_pins_a) }, ++ { "led_5_grp_a", led_5_pins_a, ARRAY_SIZE(led_5_pins_a) }, ++ { "led_6_grp_a", led_6_pins_a, ARRAY_SIZE(led_6_pins_a) }, ++ { "led_7_grp_a", led_7_pins_a, ARRAY_SIZE(led_7_pins_a) }, ++ { "led_8_grp_a", led_8_pins_a, ARRAY_SIZE(led_8_pins_a) }, ++ { "led_9_grp_a", led_9_pins_a, ARRAY_SIZE(led_9_pins_a) }, ++ { "led_10_grp_a", led_10_pins_a, ARRAY_SIZE(led_10_pins_a) }, ++ { "led_11_grp_a", led_11_pins_a, ARRAY_SIZE(led_11_pins_a) }, ++ { "led_12_grp_a", led_12_pins_a, ARRAY_SIZE(led_12_pins_a) }, ++ { "led_13_grp_a", led_13_pins_a, ARRAY_SIZE(led_13_pins_a) }, ++ { "led_14_grp_a", led_14_pins_a, ARRAY_SIZE(led_14_pins_a) }, ++ { "led_15_grp_a", led_15_pins_a, ARRAY_SIZE(led_15_pins_a) }, ++ { "led_16_grp_a", led_16_pins_a, ARRAY_SIZE(led_16_pins_a) }, ++ { "led_17_grp_a", led_17_pins_a, ARRAY_SIZE(led_17_pins_a) }, ++ { "led_18_grp_a", led_18_pins_a, ARRAY_SIZE(led_18_pins_a) }, ++ { "led_19_grp_a", led_19_pins_a, ARRAY_SIZE(led_19_pins_a) }, ++ { "led_20_grp_a", led_20_pins_a, ARRAY_SIZE(led_20_pins_a) }, ++ { "led_21_grp_a", led_21_pins_a, ARRAY_SIZE(led_21_pins_a) }, ++ { "led_22_grp_a", led_22_pins_a, ARRAY_SIZE(led_22_pins_a) }, ++ { "led_23_grp_a", led_23_pins_a, ARRAY_SIZE(led_23_pins_a) }, ++ { "led_24_grp_a", led_24_pins_a, ARRAY_SIZE(led_24_pins_a) }, ++ { "led_25_grp_a", led_25_pins_a, ARRAY_SIZE(led_25_pins_a) }, ++ { "led_26_grp_a", led_26_pins_a, ARRAY_SIZE(led_26_pins_a) }, ++ { "led_27_grp_a", led_27_pins_a, ARRAY_SIZE(led_27_pins_a) }, ++ { "led_28_grp_a", led_28_pins_a, ARRAY_SIZE(led_28_pins_a) }, ++ { "led_29_grp_a", led_29_pins_a, ARRAY_SIZE(led_29_pins_a) }, ++ { "led_30_grp_a", led_30_pins_a, ARRAY_SIZE(led_30_pins_a) }, ++ { "led_31_grp_a", led_31_pins_a, ARRAY_SIZE(led_31_pins_a) }, ++ { "led_10_grp_b", led_10_pins_b, ARRAY_SIZE(led_10_pins_b) }, ++ { "led_11_grp_b", led_11_pins_b, ARRAY_SIZE(led_11_pins_b) }, ++ { "led_12_grp_b", led_12_pins_b, ARRAY_SIZE(led_12_pins_b) }, ++ { "led_13_grp_b", led_13_pins_b, ARRAY_SIZE(led_13_pins_b) }, ++ { "led_31_grp_b", led_31_pins_b, ARRAY_SIZE(led_31_pins_b) }, ++ { "hs_uart_grp", hs_uart_pins, ARRAY_SIZE(hs_uart_pins) }, ++ { "i2c_grp_a", i2c_pins_a, ARRAY_SIZE(i2c_pins_a) }, ++ { "i2c_grp_b", i2c_pins_b, ARRAY_SIZE(i2c_pins_b) }, ++ { "i2s_grp", i2s_pins, ARRAY_SIZE(i2s_pins) }, ++ { "nand_ctrl_grp", nand_ctrl_pins, ARRAY_SIZE(nand_ctrl_pins) }, ++ { "nand_data_grp", nand_data_pins, ARRAY_SIZE(nand_data_pins) }, ++ { "emmc_ctrl_grp", emmc_ctrl_pins, ARRAY_SIZE(emmc_ctrl_pins) }, ++ { "usb0_pwr_grp", usb0_pwr_pins, ARRAY_SIZE(usb0_pwr_pins) }, ++ { "usb1_pwr_grp", usb1_pwr_pins, ARRAY_SIZE(usb1_pwr_pins) }, ++}; ++ ++/* ++ * Functions ++ */ ++ ++struct bcm4908_pinctrl_function { ++ const char *name; ++ const char * const *groups; ++ const unsigned int num_groups; ++}; ++ ++static const char * const led_0_groups[] = { "led_0_grp_a" }; ++static const char * const led_1_groups[] = { "led_1_grp_a" }; ++static const char * const led_2_groups[] = { "led_2_grp_a" }; ++static const char * const led_3_groups[] = { "led_3_grp_a" }; ++static const char * const led_4_groups[] = { "led_4_grp_a" }; ++static const char * const led_5_groups[] = { "led_5_grp_a" }; ++static const char * const led_6_groups[] = { "led_6_grp_a" }; ++static const char * const led_7_groups[] = { "led_7_grp_a" }; ++static const char * const led_8_groups[] = { "led_8_grp_a" }; ++static const char * const led_9_groups[] = { "led_9_grp_a" }; ++static const char * const led_10_groups[] = { "led_10_grp_a", "led_10_grp_b" }; ++static const char * const led_11_groups[] = { "led_11_grp_a", "led_11_grp_b" }; ++static const char * const led_12_groups[] = { "led_12_grp_a", "led_12_grp_b" }; ++static const char * const led_13_groups[] = { "led_13_grp_a", "led_13_grp_b" }; ++static const char * const led_14_groups[] = { "led_14_grp_a" }; ++static const char * const led_15_groups[] = { "led_15_grp_a" }; ++static const char * const led_16_groups[] = { "led_16_grp_a" }; ++static const char * const led_17_groups[] = { "led_17_grp_a" }; ++static const char * const led_18_groups[] = { "led_18_grp_a" }; ++static const char * const led_19_groups[] = { "led_19_grp_a" }; ++static const char * const led_20_groups[] = { "led_20_grp_a" }; ++static const char * const led_21_groups[] = { "led_21_grp_a" }; ++static const char * const led_22_groups[] = { "led_22_grp_a" }; ++static const char * const led_23_groups[] = { "led_23_grp_a" }; ++static const char * const led_24_groups[] = { "led_24_grp_a" }; ++static const char * const led_25_groups[] = { "led_25_grp_a" }; ++static const char * const led_26_groups[] = { "led_26_grp_a" }; ++static const char * const led_27_groups[] = { "led_27_grp_a" }; ++static const char * const led_28_groups[] = { "led_28_grp_a" }; ++static const char * const led_29_groups[] = { "led_29_grp_a" }; ++static const char * const led_30_groups[] = { "led_30_grp_a" }; ++static const char * const led_31_groups[] = { "led_31_grp_a", "led_31_grp_b" }; ++static const char * const hs_uart_groups[] = { "hs_uart_grp" }; ++static const char * const i2c_groups[] = { "i2c_grp_a", "i2c_grp_b" }; ++static const char * const i2s_groups[] = { "i2s_grp" }; ++static const char * const nand_ctrl_groups[] = { "nand_ctrl_grp" }; ++static const char * const nand_data_groups[] = { "nand_data_grp" }; ++static const char * const emmc_ctrl_groups[] = { "emmc_ctrl_grp" }; ++static const char * const usb0_pwr_groups[] = { "usb0_pwr_grp" }; ++static const char * const usb1_pwr_groups[] = { "usb1_pwr_grp" }; ++ ++static const struct bcm4908_pinctrl_function bcm4908_pinctrl_functions[] = { ++ { "led_0", led_0_groups, ARRAY_SIZE(led_0_groups) }, ++ { "led_1", led_1_groups, ARRAY_SIZE(led_1_groups) }, ++ { "led_2", led_2_groups, ARRAY_SIZE(led_2_groups) }, ++ { "led_3", led_3_groups, ARRAY_SIZE(led_3_groups) }, ++ { "led_4", led_4_groups, ARRAY_SIZE(led_4_groups) }, ++ { "led_5", led_5_groups, ARRAY_SIZE(led_5_groups) }, ++ { "led_6", led_6_groups, ARRAY_SIZE(led_6_groups) }, ++ { "led_7", led_7_groups, ARRAY_SIZE(led_7_groups) }, ++ { "led_8", led_8_groups, ARRAY_SIZE(led_8_groups) }, ++ { "led_9", led_9_groups, ARRAY_SIZE(led_9_groups) }, ++ { "led_10", led_10_groups, ARRAY_SIZE(led_10_groups) }, ++ { "led_11", led_11_groups, ARRAY_SIZE(led_11_groups) }, ++ { "led_12", led_12_groups, ARRAY_SIZE(led_12_groups) }, ++ { "led_13", led_13_groups, ARRAY_SIZE(led_13_groups) }, ++ { "led_14", led_14_groups, ARRAY_SIZE(led_14_groups) }, ++ { "led_15", led_15_groups, ARRAY_SIZE(led_15_groups) }, ++ { "led_16", led_16_groups, ARRAY_SIZE(led_16_groups) }, ++ { "led_17", led_17_groups, ARRAY_SIZE(led_17_groups) }, ++ { "led_18", led_18_groups, ARRAY_SIZE(led_18_groups) }, ++ { "led_19", led_19_groups, ARRAY_SIZE(led_19_groups) }, ++ { "led_20", led_20_groups, ARRAY_SIZE(led_20_groups) }, ++ { "led_21", led_21_groups, ARRAY_SIZE(led_21_groups) }, ++ { "led_22", led_22_groups, ARRAY_SIZE(led_22_groups) }, ++ { "led_23", led_23_groups, ARRAY_SIZE(led_23_groups) }, ++ { "led_24", led_24_groups, ARRAY_SIZE(led_24_groups) }, ++ { "led_25", led_25_groups, ARRAY_SIZE(led_25_groups) }, ++ { "led_26", led_26_groups, ARRAY_SIZE(led_26_groups) }, ++ { "led_27", led_27_groups, ARRAY_SIZE(led_27_groups) }, ++ { "led_28", led_28_groups, ARRAY_SIZE(led_28_groups) }, ++ { "led_29", led_29_groups, ARRAY_SIZE(led_29_groups) }, ++ { "led_30", led_30_groups, ARRAY_SIZE(led_30_groups) }, ++ { "led_31", led_31_groups, ARRAY_SIZE(led_31_groups) }, ++ { "hs_uart", hs_uart_groups, ARRAY_SIZE(hs_uart_groups) }, ++ { "i2c", i2c_groups, ARRAY_SIZE(i2c_groups) }, ++ { "i2s", i2s_groups, ARRAY_SIZE(i2s_groups) }, ++ { "nand_ctrl", nand_ctrl_groups, ARRAY_SIZE(nand_ctrl_groups) }, ++ { "nand_data", nand_data_groups, ARRAY_SIZE(nand_data_groups) }, ++ { "emmc_ctrl", emmc_ctrl_groups, ARRAY_SIZE(emmc_ctrl_groups) }, ++ { "usb0_pwr", usb0_pwr_groups, ARRAY_SIZE(usb0_pwr_groups) }, ++ { "usb1_pwr", usb1_pwr_groups, ARRAY_SIZE(usb1_pwr_groups) }, ++}; ++ ++/* ++ * Groups code ++ */ ++ ++static const struct pinctrl_ops bcm4908_pinctrl_ops = { ++ .get_groups_count = pinctrl_generic_get_group_count, ++ .get_group_name = pinctrl_generic_get_group_name, ++ .get_group_pins = pinctrl_generic_get_group_pins, ++ .dt_node_to_map = pinconf_generic_dt_node_to_map_group, ++ .dt_free_map = pinconf_generic_dt_free_map, ++}; ++ ++/* ++ * Functions code ++ */ ++ ++static int bcm4908_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev, ++ unsigned int func_selector, ++ unsigned int group_selector) ++{ ++ struct bcm4908_pinctrl *bcm4908_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev); ++ const struct bcm4908_pinctrl_grp *group; ++ struct group_desc *group_desc; ++ int i; ++ ++ group_desc = pinctrl_generic_get_group(pctrl_dev, group_selector); ++ if (!group_desc) ++ return -EINVAL; ++ group = group_desc->data; ++ ++ mutex_lock(&bcm4908_pinctrl->mutex); ++ for (i = 0; i < group->num_pins; i++) { ++ u32 lsb = 0; ++ ++ lsb |= group->pins[i].number; ++ lsb |= group->pins[i].function << BCM4908_TEST_PORT_LSB_PINMUX_DATA_SHIFT; ++ ++ writel(0x0, bcm4908_pinctrl->base + BCM4908_TEST_PORT_BLOCK_DATA_MSB); ++ writel(lsb, bcm4908_pinctrl->base + BCM4908_TEST_PORT_BLOCK_DATA_LSB); ++ writel(BCM4908_TEST_PORT_CMD_LOAD_MUX_REG, ++ bcm4908_pinctrl->base + BCM4908_TEST_PORT_COMMAND); ++ } ++ mutex_unlock(&bcm4908_pinctrl->mutex); ++ ++ return 0; ++} ++ ++static const struct pinmux_ops bcm4908_pinctrl_pmxops = { ++ .get_functions_count = pinmux_generic_get_function_count, ++ .get_function_name = pinmux_generic_get_function_name, ++ .get_function_groups = pinmux_generic_get_function_groups, ++ .set_mux = bcm4908_pinctrl_set_mux, ++}; ++ ++/* ++ * Controller code ++ */ ++ ++static struct pinctrl_desc bcm4908_pinctrl_desc = { ++ .name = "bcm4908-pinctrl", ++ .pctlops = &bcm4908_pinctrl_ops, ++ .pmxops = &bcm4908_pinctrl_pmxops, ++}; ++ ++static const struct of_device_id bcm4908_pinctrl_of_match_table[] = { ++ { .compatible = "brcm,bcm4908-pinctrl", }, ++ { } ++}; ++ ++static int bcm4908_pinctrl_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct bcm4908_pinctrl *bcm4908_pinctrl; ++ struct pinctrl_desc *pctldesc; ++ struct pinctrl_pin_desc *pins; ++ int i; ++ ++ bcm4908_pinctrl = devm_kzalloc(dev, sizeof(*bcm4908_pinctrl), GFP_KERNEL); ++ if (!bcm4908_pinctrl) ++ return -ENOMEM; ++ pctldesc = &bcm4908_pinctrl->pctldesc; ++ platform_set_drvdata(pdev, bcm4908_pinctrl); ++ ++ /* Set basic properties */ ++ ++ bcm4908_pinctrl->dev = dev; ++ ++ bcm4908_pinctrl->base = devm_platform_ioremap_resource(pdev, 0); ++ if (IS_ERR(bcm4908_pinctrl->base)) ++ return PTR_ERR(bcm4908_pinctrl->base); ++ ++ mutex_init(&bcm4908_pinctrl->mutex); ++ ++ memcpy(pctldesc, &bcm4908_pinctrl_desc, sizeof(*pctldesc)); ++ ++ /* Set pinctrl properties */ ++ ++ pins = devm_kcalloc(dev, BCM4908_NUM_PINS, sizeof(*pins), GFP_KERNEL); ++ if (!pins) ++ return -ENOMEM; ++ for (i = 0; i < BCM4908_NUM_PINS; i++) { ++ pins[i].number = i; ++ pins[i].name = devm_kasprintf(dev, GFP_KERNEL, "pin-%d", i); ++ if (!pins[i].name) ++ return -ENOMEM; ++ } ++ pctldesc->pins = pins; ++ pctldesc->npins = BCM4908_NUM_PINS; ++ ++ /* Register */ ++ ++ bcm4908_pinctrl->pctldev = devm_pinctrl_register(dev, pctldesc, bcm4908_pinctrl); ++ if (IS_ERR(bcm4908_pinctrl->pctldev)) ++ return dev_err_probe(dev, PTR_ERR(bcm4908_pinctrl->pctldev), ++ "Failed to register pinctrl\n"); ++ ++ /* Groups */ ++ ++ for (i = 0; i < ARRAY_SIZE(bcm4908_pinctrl_grps); i++) { ++ const struct bcm4908_pinctrl_grp *group = &bcm4908_pinctrl_grps[i]; ++ int *pins; ++ int j; ++ ++ pins = devm_kcalloc(dev, group->num_pins, sizeof(*pins), GFP_KERNEL); ++ if (!pins) ++ return -ENOMEM; ++ for (j = 0; j < group->num_pins; j++) ++ pins[j] = group->pins[j].number; ++ ++ pinctrl_generic_add_group(bcm4908_pinctrl->pctldev, group->name, ++ pins, group->num_pins, (void *)group); ++ } ++ ++ /* Functions */ ++ ++ for (i = 0; i < ARRAY_SIZE(bcm4908_pinctrl_functions); i++) { ++ const struct bcm4908_pinctrl_function *function = &bcm4908_pinctrl_functions[i]; ++ ++ pinmux_generic_add_function(bcm4908_pinctrl->pctldev, ++ function->name, ++ function->groups, ++ function->num_groups, NULL); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver bcm4908_pinctrl_driver = { ++ .probe = bcm4908_pinctrl_probe, ++ .driver = { ++ .name = "bcm4908-pinctrl", ++ .of_match_table = bcm4908_pinctrl_of_match_table, ++ }, ++}; ++ ++module_platform_driver(bcm4908_pinctrl_driver); ++ ++MODULE_AUTHOR("Rafał Miłecki"); ++MODULE_LICENSE("GPL v2"); ++MODULE_DEVICE_TABLE(of, bcm4908_pinctrl_of_match_table); diff --git a/target/linux/bcm4908/patches-5.15/081-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch b/target/linux/bcm4908/patches-5.15/081-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch new file mode 100644 index 0000000000..246f249413 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/081-v5.18-0001-i2c-brcmstb-allow-compiling-on-BCM4908.patch @@ -0,0 +1,30 @@ +From d0aee048d648ec2d9aa7af43b127ebf847d497d5 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 11 Feb 2022 11:58:06 +0100 +Subject: [PATCH] i2c: brcmstb: allow compiling on BCM4908 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 SoCs use the same I2C hardware block as STB and BCM63xx devices. + +Signed-off-by: Rafał Miłecki +Acked-by: Florian Fainelli +Signed-off-by: Wolfram Sang +--- + drivers/i2c/busses/Kconfig | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -477,8 +477,8 @@ config I2C_BCM_KONA + + config I2C_BRCMSTB + tristate "BRCM Settop/DSL I2C controller" +- depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC || \ +- ARCH_BCM_63XX || COMPILE_TEST ++ depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \ ++ ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST + default y + help + If you say yes to this option, support will be included for the diff --git a/target/linux/bcm4908/patches-5.15/082-v5.18-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch b/target/linux/bcm4908/patches-5.15/082-v5.18-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch new file mode 100644 index 0000000000..0717436ffa --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/082-v5.18-watchdog-allow-building-BCM7038_WDT-for-BCM4908.patch @@ -0,0 +1,32 @@ +From cd91fb2776967b2b2dea27307a3f23ba3d9bbb32 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 9 Feb 2022 21:32:02 +0100 +Subject: [PATCH] watchdog: allow building BCM7038_WDT for BCM4908 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx +including the watchdog block. Allow building this driver for it. + +Signed-off-by: Rafał Miłecki +Acked-by: Florian Fainelli +Reviewed-by: Guenter Roeck +Link: https://lore.kernel.org/r/20220209203202.26395-1-zajec5@gmail.com +Signed-off-by: Guenter Roeck +Signed-off-by: Wim Van Sebroeck +--- + drivers/watchdog/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -1756,7 +1756,7 @@ config BCM7038_WDT + tristate "BCM7038 Watchdog" + select WATCHDOG_CORE + depends on HAS_IOMEM +- depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST ++ depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST + help + Watchdog driver for the built-in hardware in Broadcom 7038 and + later SoCs used in set-top boxes. BCM7038 was made public diff --git a/target/linux/bcm4908/patches-5.15/083-v5.20-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch b/target/linux/bcm4908/patches-5.15/083-v5.20-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch new file mode 100644 index 0000000000..14b6c61bac --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/083-v5.20-watchdog-bcm7038_wdt-Support-BCM6345-compatible-stri.patch @@ -0,0 +1,34 @@ +From 2dd441f16d6ad6104d85c4e5dfeb6dde4df26869 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 16 Feb 2022 07:34:08 +0100 +Subject: [PATCH] watchdog: bcm7038_wdt: Support BCM6345 compatible string +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +A new "compatible" value has been added in the commit 17fffe91ba36 +("dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding"). +It's meant to be used for BCM63xx SoCs family but hardware block can be +programmed just like the 7038 one. + +Cc: Florian Fainelli +Signed-off-by: Rafał Miłecki +Acked-by: Florian Fainelli +Reviewed-by: Guenter Roeck +Link: https://lore.kernel.org/r/20220216063408.23168-1-zajec5@gmail.com +Signed-off-by: Guenter Roeck +Signed-off-by: Wim Van Sebroeck +--- + drivers/watchdog/bcm7038_wdt.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/watchdog/bcm7038_wdt.c ++++ b/drivers/watchdog/bcm7038_wdt.c +@@ -212,6 +212,7 @@ static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_ + bcm7038_wdt_resume); + + static const struct of_device_id bcm7038_wdt_match[] = { ++ { .compatible = "brcm,bcm6345-wdt" }, + { .compatible = "brcm,bcm7038-wdt" }, + {}, + }; diff --git a/target/linux/bcm4908/patches-5.15/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch b/target/linux/bcm4908/patches-5.15/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch new file mode 100644 index 0000000000..bc0743c800 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch @@ -0,0 +1,23 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 15 Feb 2021 22:01:03 +0100 +Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: limit amount of GPIOs +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Linux driver can't handle more than 64 GPIOs + +Signed-off-by: Rafał Miłecki +--- + +--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +@@ -297,7 +297,7 @@ + gpio0: gpio-controller@500 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; +- reg = <0x500 0x28>, <0x528 0x28>; ++ reg = <0x500 0x8>, <0x528 0x8>; + + #gpio-cells = <2>; + gpio-controller; diff --git a/target/linux/bcm4908/patches-5.15/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch b/target/linux/bcm4908/patches-5.15/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch new file mode 100644 index 0000000000..74dddb7f48 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/400-mtd-rawnand-brcmnand-disable-WP-on-BCM4908.patch @@ -0,0 +1,34 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 21 Jan 2021 10:44:53 +0100 +Subject: [PATCH] mtd: rawnand: brcmnand: disable WP on BCM4908 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 contains NAND controller version 0x0701 (v7.1). It means that +NAND_WP should be available. + +For some reason setting #WP on doesn't result in clearing NAND_STATUS_WP +status bit: +[ 1.077857] bcm63138_nand ff801800.nand: timeout on status poll (expected c0000040 got c00000c0) +[ 1.086832] bcm63138_nand ff801800.nand: nand #WP expected on + +For now try working without touching #WP. + +Signed-off-by: Rafał Miłecki +--- + +--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c ++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c +@@ -37,7 +37,11 @@ + * 1: NAND_WP is set by default, cleared for erase/write operations + * 2: NAND_WP is always cleared + */ ++#if IS_ENABLED(CONFIG_ARCH_BCM4908) ++static int wp_on = 0; ++#else + static int wp_on = 1; ++#endif + module_param(wp_on, int, 0444); + + /*********************************************************************** diff --git a/target/linux/bcm4908/patches-5.15/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch b/target/linux/bcm4908/patches-5.15/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch new file mode 100644 index 0000000000..af1c9bcefd --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch @@ -0,0 +1,46 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 15 Feb 2021 23:59:26 +0100 +Subject: [PATCH] net: dsa: bcm_sf2: enable GPHY for switch probing +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +GPHY needs to be enabled to succesfully probe & setup switch port +connected to it. Otherwise hardcoding PHY OUI would be required. + +Before: +brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL) +brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL) +brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL) +brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL) +brcm-sf2 80080000.switch wan (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 7 + +After: +brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL) +brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL) +brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL) +brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL) +brcm-sf2 80080000.switch wan (uninitialized): PHY [800c05c0.mdio--1:0c] driver [Generic PHY] (irq=POLL) + +Signed-off-by: Rafał Miłecki +--- + drivers/net/dsa/bcm_sf2.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/net/dsa/bcm_sf2.c ++++ b/drivers/net/dsa/bcm_sf2.c +@@ -1538,10 +1538,14 @@ static int bcm_sf2_sw_probe(struct platf + rev = reg_readl(priv, REG_PHY_REVISION); + priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK; + ++ bcm_sf2_gphy_enable_set(priv->dev->ds, true); ++ + ret = b53_switch_register(dev); + if (ret) + goto out_mdio; + ++ bcm_sf2_gphy_enable_set(priv->dev->ds, false); ++ + dev_info(&pdev->dev, + "Starfighter 2 top: %x.%02x, core: %x.%02x, IRQs: %d, %d\n", + priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff, diff --git a/target/linux/bcm4908/patches-5.15/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch b/target/linux/bcm4908/patches-5.15/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch new file mode 100644 index 0000000000..e78b4a47d7 --- /dev/null +++ b/target/linux/bcm4908/patches-5.15/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch @@ -0,0 +1,30 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 16 Feb 2021 00:06:35 +0100 +Subject: [PATCH] net: dsa: bcm_sf2: keep GPHY enabled on the BCM4908 + +Trying to access disabled PHY results in MDIO_READ_FAIL and: +[ 11.962886] brcm-sf2 80080000.switch wan: configuring for phy/internal link mode +[ 11.972500] 8021q: adding VLAN 0 to HW filter on device wan +[ 11.980205] ------------[ cut here ]------------ +[ 11.984885] WARNING: CPU: 0 PID: 7 at phy_error+0x10/0x58 + +Signed-off-by: Rafał Miłecki +--- + drivers/net/dsa/bcm_sf2.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/net/dsa/bcm_sf2.c ++++ b/drivers/net/dsa/bcm_sf2.c +@@ -1552,6 +1552,12 @@ static int bcm_sf2_sw_probe(struct platf + priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff, + priv->irq0, priv->irq1); + ++ /* BCM4908 has 5 GPHYs which means bcm_sf2_port_setup() will not enable ++ * GPHY when needed. Leave it enabled here. ++ */ ++ if (priv->type == BCM4908_DEVICE_ID) ++ bcm_sf2_gphy_enable_set(priv->dev->ds, true); ++ + return 0; + + out_mdio: