From: Andrew Lunn Date: Sun, 16 Oct 2016 17:56:51 +0000 (+0200) Subject: net: phy: Threaded interrupts allow some simplification X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=664fcf123a30;p=openwrt%2Fstaging%2Fblogic.git net: phy: Threaded interrupts allow some simplification The PHY interrupts are now handled in a threaded interrupt handler, which can sleep. The work queue is no longer needed, phy_change() can be called directly. phy_mac_interrupt() still needs to be safe to call in interrupt context, so keep the work queue, and use a helper to call phy_change(). Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 25f2b296aaba..bb673c63c85c 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -664,7 +664,7 @@ static void phy_error(struct phy_device *phydev) * @phy_dat: phy_device pointer * * Description: When a PHY interrupt occurs, the handler disables - * interrupts, and schedules a work task to clear the interrupt. + * interrupts, and uses phy_change to handle the interrupt. */ static irqreturn_t phy_interrupt(int irq, void *phy_dat) { @@ -673,15 +673,10 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat) if (PHY_HALTED == phydev->state) return IRQ_NONE; /* It can't be ours. */ - /* The MDIO bus is not allowed to be written in interrupt - * context, so we need to disable the irq here. A work - * queue will write the PHY to disable and clear the - * interrupt, and then reenable the irq line. - */ disable_irq_nosync(irq); atomic_inc(&phydev->irq_disable); - queue_work(system_power_efficient_wq, &phydev->phy_queue); + phy_change(phydev); return IRQ_HANDLED; } @@ -766,12 +761,6 @@ int phy_stop_interrupts(struct phy_device *phydev) free_irq(phydev->irq, phydev); - /* Cannot call flush_scheduled_work() here as desired because - * of rtnl_lock(), but we do not really care about what would - * be done, except from enable_irq(), so cancel any work - * possibly pending and take care of the matter below. - */ - cancel_work_sync(&phydev->phy_queue); /* If work indeed has been cancelled, disable_irq() will have * been left unbalanced from phy_interrupt() and enable_irq() * has to be called so that other devices on the line work. @@ -784,14 +773,11 @@ int phy_stop_interrupts(struct phy_device *phydev) EXPORT_SYMBOL(phy_stop_interrupts); /** - * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes - * @work: work_struct that describes the work to be done + * phy_change - Called by the phy_interrupt to handle PHY changes + * @phydev: phy_device struct that interrupted */ -void phy_change(struct work_struct *work) +void phy_change(struct phy_device *phydev) { - struct phy_device *phydev = - container_of(work, struct phy_device, phy_queue); - if (phy_interrupt_is_valid(phydev)) { if (phydev->drv->did_interrupt && !phydev->drv->did_interrupt(phydev)) @@ -832,6 +818,18 @@ phy_err: phy_error(phydev); } +/** + * phy_change_work - Scheduled by the phy_mac_interrupt to handle PHY changes + * @work: work_struct that describes the work to be done + */ +void phy_change_work(struct work_struct *work) +{ + struct phy_device *phydev = + container_of(work, struct phy_device, phy_queue); + + phy_change(phydev); +} + /** * phy_stop - Bring down the PHY link, and stop checking the status * @phydev: target phy_device struct @@ -1116,6 +1114,15 @@ void phy_state_machine(struct work_struct *work) PHY_STATE_TIME * HZ); } +/** + * phy_mac_interrupt - MAC says the link has changed + * @phydev: phy_device struct with changed link + * @new_link: Link is Up/Down. + * + * Description: The MAC layer is able indicate there has been a change + * in the PHY link status. Set the new link status, and trigger the + * state machine, work a work queue. + */ void phy_mac_interrupt(struct phy_device *phydev, int new_link) { phydev->link = new_link; diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e977ba931878..ac440a815353 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -347,7 +347,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, mutex_init(&dev->lock); INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); - INIT_WORK(&dev->phy_queue, phy_change); + INIT_WORK(&dev->phy_queue, phy_change_work); /* Request the appropriate module unconditionally; don't * bother trying to do so only if it isn't already loaded, diff --git a/include/linux/phy.h b/include/linux/phy.h index e25f1830fbcf..c47378c93607 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -343,7 +343,7 @@ struct phy_c45_device_ids { * giving up on the current attempt at acquiring a link * irq: IRQ number of the PHY's interrupt (-1 if none) * phy_timer: The timer for handling the state machine - * phy_queue: A work_queue for the interrupt + * phy_queue: A work_queue for the phy_mac_interrupt * attached_dev: The attached enet driver's device instance ptr * adjust_link: Callback for the enet controller to respond to * changes in the link state. @@ -802,7 +802,8 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner); int phy_drivers_register(struct phy_driver *new_driver, int n, struct module *owner); void phy_state_machine(struct work_struct *work); -void phy_change(struct work_struct *work); +void phy_change(struct phy_device *phydev); +void phy_change_work(struct work_struct *work); void phy_mac_interrupt(struct phy_device *phydev, int new_link); void phy_start_machine(struct phy_device *phydev); void phy_stop_machine(struct phy_device *phydev);