From: Guillaume Lefebvre <guillaume@zelig.ch>
Date: Wed, 9 Nov 2022 05:52:18 +0000 (+0100)
Subject: ipq40xx: D-Link DAP-2610: convert to DSA
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=65d9a715fc891740a900052be625f60da3a2b6a3;p=openwrt%2Fstaging%2Fxback.git

ipq40xx: D-Link DAP-2610: convert to DSA

Reenable D-Link DAP-2610, convert it to DSA and label port to 'lan', as shown on the case

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Guillaume Lefebvre <guillaume@zelig.ch>
---

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 16b0f05a5b..80b7b02e8a 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -43,6 +43,7 @@ ipq40xx_setup_interfaces()
 		;;
 	aruba,ap-303|\
 	avm,fritzrepeater-1200|\
+	dlink,dap-2610|\
 	meraki,mr33|\
 	meraki,mr74|\
 	mikrotik,lhgg-60ad|\
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
index ff8053c42b..724047c469 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
@@ -181,6 +181,20 @@
 	status = "okay";
 };
 
+&gmac {
+       status = "okay";
+};
+
+&switch {
+       status = "okay";
+};
+
+&swport5 {
+       status = "okay";
+
+       label = "lan";
+};
+
 &tlmm {
 	serial_pins: serial_pinmux {
 		mux {
diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index b50d072bec..9fb34a7871 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -419,8 +419,7 @@ define Device/dlink_dap-2610
 	IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 	IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += dlink_dap-2610
+TARGET_DEVICES += dlink_dap-2610
 
 define Device/edgecore_ecw5211
 	$(call Device/FitImage)