From: Rany Hany Date: Mon, 2 Dec 2024 11:30:07 +0000 (+0000) Subject: hostapd: add SAE support for wifi-station and optimize PSK file creation X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=65a1c666f2eb2511430a9064686b3590e08b1773;p=openwrt%2Fopenwrt.git hostapd: add SAE support for wifi-station and optimize PSK file creation Regarding SAE support in wifi-station: Important Note: Unlike PSK wifi-stations, both `mac` and `key` options are required to make it work. With PSK, hostapd used to perform a brute-force match to find which PSK entry to use, but with SAE this is infeasible due to SAE's design. When `mac` is omitted, it will allow any MAC address to use the SAE password if it didn't have a MAC address assigned to it, but this could only be done once. The last wildcard entry would be used. Also, unlike "hostapd: add support for SAE in PPSK option" (commit 913368a), it is not required to set `sae_pwe` to `0`. This gives it a slight advantage over using PPSK that goes beyond not needing RADIUS. Example Configuration: ``` config wifi-vlan option iface default_radio0 option name 999 option vid 999 option network management config wifi-station # Allow user with MAC address 00:11:22:33:44:55 and matching # key "secretadminpass" to access the management network. option iface default_radio0 option vid 999 option mac '00:11:22:33:44:55' option key secretadminpass config wifi-vlan option iface default_radio0 option name 100 option vid 100 option network guest config wifi-station # With SAE, when 'mac' is omitted it will be the fallback in case no # other MAC address matches. It won't be possible for a user that # has a matching MAC to use this network (i.e., 00:11:22:33:44:55 # in this example). option iface default_radio0 option vid 100 option key guestpass ``` Regarding PSK file creation optimization: This patch now conditionally runs `hostapd_set_psk_file` depending on `auth_type`. Previously, `hostapd_set_psk` would always execute `hostapd_set_psk_file`, which would create a new file if `wifi-station` was in use even if PSK was not enabled. This change checks the `auth_type` to ensure that it is appropriate to parse the `wifi-station` entries and create those files. Furthermore, we now only configure `wpa_psk_file` when it is a supported option (i.e., psk or psk-sae is used). Previously, we used to configure it when it was not necessary. While it didn't cause any issues, it would litter `/var/run` with unnecessary files. This patch fixes that case by configuring it depending on the `auth_type`. The new SAE support is aligned with these PSK file changes. Signed-off-by: Rany Hany Link: https://github.com/openwrt/openwrt/pull/17145 Signed-off-by: John Crispin --- diff --git a/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh b/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh index 817ead71af..0b2241ea60 100644 --- a/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh +++ b/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh @@ -428,9 +428,36 @@ hostapd_set_psk() { local ifname="$1" rm -f /var/run/hostapd-${ifname}.psk + case "$auth_type" in + psk|psk-sae) ;; + *) return ;; + esac for_each_station hostapd_set_psk_file ${ifname} } +hostapd_set_sae_file() { + local ifname="$1" + local vlan="$2" + local vlan_id="" + + json_get_vars mac vid key + set_default mac "ff:ff:ff:ff:ff:ff" + [ -n "$mac" ] && mac="|mac=$mac" + [ -n "$vid" ] && vlan_id="|vlanid=$vid" + printf '%s%s%s\n' "${key}" "${mac}" "${vlan_id}" >> /var/run/hostapd-${ifname}.sae +} + +hostapd_set_sae() { + local ifname="$1" + + rm -f /var/run/hostapd-${ifname}.sae + case "$auth_type" in + sae|psk-sae) ;; + *) return ;; + esac + for_each_station hostapd_set_sae_file ${ifname} +} + append_iw_roaming_consortium() { [ -n "$1" ] && append bss_conf "roaming_consortium=$1" "$N" } @@ -686,7 +713,7 @@ hostapd_set_bss_options() { wps_not_configured=1 ;; psk|sae|psk-sae) - json_get_vars key wpa_psk_file + json_get_vars key wpa_psk_file sae_password_file if [ "$ppsk" -ne 0 ]; then json_get_vars auth_secret auth_port set_default auth_port 1812 @@ -697,15 +724,20 @@ hostapd_set_bss_options() { append bss_conf "wpa_psk=$key" "$N" elif [ ${#key} -ge 8 ] && [ ${#key} -le 63 ]; then append bss_conf "wpa_passphrase=$key" "$N" - elif [ -n "$key" ] || [ -z "$wpa_psk_file" ]; then + elif [ -n "$key" ] || [ -z "$wpa_psk_file" ] || [ -z "$sae_password_file" ]; then wireless_setup_vif_failed INVALID_WPA_PSK return 1 fi [ -z "$wpa_psk_file" ] && set_default wpa_psk_file /var/run/hostapd-$ifname.psk - [ -n "$wpa_psk_file" ] && { + [ -n "$wpa_psk_file" ] && [ "$auth_type" = "psk" -o "$auth_type" = "psk-sae" ] && { [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file" append bss_conf "wpa_psk_file=$wpa_psk_file" "$N" } + [ -z "$sae_password_file" ] && set_default sae_password_file /var/run/hostapd-$ifname.sae + [ -n "$sae_password_file" ] && [ "$auth_type" = "sae" -o "$auth_type" = "psk-sae" ] && { + [ -e "$sae_password_file" ] || touch "$sae_password_file" + append bss_conf "sae_password_file=$sae_password_file" "$N" + } [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N" set_default dynamic_vlan 0 diff --git a/package/network/config/wifi-scripts/files/lib/netifd/wireless/mac80211.sh b/package/network/config/wifi-scripts/files/lib/netifd/wireless/mac80211.sh index f65128783f..c835b46e75 100755 --- a/package/network/config/wifi-scripts/files/lib/netifd/wireless/mac80211.sh +++ b/package/network/config/wifi-scripts/files/lib/netifd/wireless/mac80211.sh @@ -669,7 +669,7 @@ mac80211_set_ifname() { mac80211_prepare_vif() { json_select config - json_get_vars ifname mode ssid wds powersave macaddr enable wpa_psk_file vlan_file + json_get_vars ifname mode ssid wds powersave macaddr enable wpa_psk_file sae_password_file vlan_file [ -n "$ifname" ] || { local prefix; @@ -702,7 +702,12 @@ mac80211_prepare_vif() { [ "$mode" == "ap" ] && { + json_select config + wireless_vif_parse_encryption + json_select .. + [ -z "$wpa_psk_file" ] && hostapd_set_psk "$ifname" + [ -z "$sae_password_file" ] && hostapd_set_sae "$ifname" [ -z "$vlan_file" ] && hostapd_set_vlan "$ifname" } diff --git a/package/network/services/hostapd/files/hostapd.uc b/package/network/services/hostapd/files/hostapd.uc index 76a3d706f7..1593feef6b 100644 --- a/package/network/services/hostapd/files/hostapd.uc +++ b/package/network/services/hostapd/files/hostapd.uc @@ -10,6 +10,7 @@ hostapd.data.pending_config = {}; hostapd.data.file_fields = { vlan_file: true, wpa_psk_file: true, + sae_password_file: true, accept_mac_file: true, deny_mac_file: true, eap_user_file: true, @@ -365,6 +366,7 @@ function bss_remove_file_fields(config) for (let key in config.hash) new_cfg.hash[key] = config.hash[key]; delete new_cfg.hash.wpa_psk_file; + delete new_cfg.hash.sae_password_file; delete new_cfg.hash.vlan_file; return new_cfg;