From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 27 Jul 2010 21:04:43 +0000 (+0000)
Subject: ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have... 
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=65899cfa4946f945d1a91eab21b73f7534d5baf8;p=openwrt%2Fstaging%2Fneocturne.git

ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do

SVN-Revision: 22401
---

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.c b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.c
index c48af45cfb..e45092c46c 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.c
@@ -50,17 +50,11 @@ void __init ap91_eth_init(u8 *mac_addr, const char *port_names[])
 	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 	ar71xx_eth0_data.speed = SPEED_100;
 	ar71xx_eth0_data.duplex = DUPLEX_FULL;
-	ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
-	ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
-	ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
 
 	/* LAN ports */
 	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 	ar71xx_eth1_data.speed = SPEED_1000;
 	ar71xx_eth1_data.duplex = DUPLEX_FULL;
-	ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
-	ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
-	ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
 
 	ar71xx_add_device_mdio(0x0);
 	ar71xx_add_device_eth(1);