From: wdenk Date: Sun, 10 Oct 2004 22:16:06 +0000 (+0000) Subject: * Configure SX1 board to use drivers/cfi_flash.c X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=656658dd1577b62d5192ba2db4d9b8a3be1dbee3;p=project%2Fbcm63xx%2Fu-boot.git * Configure SX1 board to use drivers/cfi_flash.c * Patches by Michael Bendzick, 30 Aug 2004: - Configure omap1510inn board to use drivers/cfi_flash.c - Make drivers/cfi_flash.c protect environment and redundant environment. * Patch by Steven Scholz, 23 Jun 2004: - Add script (tools/img2brec.sh) to programm U-Boot into (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L --- diff --git a/CHANGELOG b/CHANGELOG index 3932e37b55..8fcc6c49cb 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,17 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Configure SX1 board to use drivers/cfi_flash.c + +* Patches by Michael Bendzick, 30 Aug 2004: + - Configure omap1510inn board to use drivers/cfi_flash.c + - Make drivers/cfi_flash.c protect environment and redundant + environment. + +* Patch by Steven Scholz, 23 Jun 2004: + - Add script (tools/img2brec.sh) to programm U-Boot into + (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L + * Patches by Scott McNutt, 24 Aug 2004: - Add support for Altera Nios-II processors. - Add support for Psyent PCI-5441 board. diff --git a/board/omap1510inn/Makefile b/board/omap1510inn/Makefile index 28996ba9c6..bd6285cb23 100644 --- a/board/omap1510inn/Makefile +++ b/board/omap1510inn/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS := omap1510innovator.o flash.o +OBJS := omap1510innovator.o SOBJS := platform.o $(LIB): $(OBJS) $(SOBJS) diff --git a/board/omap1510inn/flash.c b/board/omap1510inn/flash.c deleted file mode 100644 index 9453987aa9..0000000000 --- a/board/omap1510inn/flash.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#undef FLASH_PORT_WIDTH32 -#define FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect ( FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect ( FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - switch (value) { - - case (FPW) INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x02000000; - break; /* => 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CFG_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /*start = get_timer (0); */ - last = start; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = (FPW) 0x00B000B0; /* suspend erase */ - *addr = (FPW) 0x00FF00FF; /* reset to read mode */ - rcode = 1; - break; - } - } - - *addr = (FPW) 0x00500050; /* clear status register cmd. */ - *addr = (FPW) 0x00FF00FF; /* resest to read mode */ - - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - - if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/sx1/Makefile b/board/sx1/Makefile index 808c76afe5..8cd02d1411 100644 --- a/board/sx1/Makefile +++ b/board/sx1/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS := sx1.o flash.o +OBJS := sx1.o SOBJS := platform.o $(LIB): $(OBJS) $(SOBJS) diff --git a/board/sx1/flash.c b/board/sx1/flash.c deleted file mode 100644 index 1373406668..0000000000 --- a/board/sx1/flash.c +++ /dev/null @@ -1,444 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#undef FLASH_PORT_WIDTH32 -#define FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - case 1: - flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect ( FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect ( FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[0]); - -#ifdef CFG_ENV_ADDR_REDUND - flash_protect ( FLAG_PROTECT_SET, - CFG_ENV_ADDR_REDUND, - CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1, - &flash_info[0]); -#endif - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - case FLASH_28F640J3A: - printf ("28F640J3A\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - switch (value) { - case (FPW) INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x01000000; - break; /* => 16 MB */ - case (FPW) INTEL_ID_28F640J3A: - info->flash_id += FLASH_28F640J3A; - info->sector_count = 64; - info->size = 0x00800000; - break; /* => 8 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CFG_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /*start = get_timer (0); */ - last = start; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = (FPW) 0x00B000B0; /* suspend erase */ - *addr = (FPW) 0x00FF00FF; /* reset to read mode */ - rcode = 1; - break; - } - } - - *addr = (FPW) 0x00500050; /* clear status register cmd. */ - *addr = (FPW) 0x00FF00FF; /* resest to read mode */ - - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - - if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c index fcf213cda2..c46ac24760 100644 --- a/drivers/cfi_flash.c +++ b/drivers/cfi_flash.c @@ -338,6 +338,21 @@ unsigned long flash_init (void) &flash_info[0]); #endif + /* Environment protection ON by default */ +#ifdef CFG_ENV_IS_IN_FLASH + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); +#endif + + /* Redundant environment protection ON by default */ +#ifdef CFG_ENV_ADDR_REDUND + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1, + &flash_info[0]); +#endif return (size); } diff --git a/include/configs/SX1.h b/include/configs/SX1.h index ae4cf60083..de7f387817 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -161,16 +161,30 @@ * FLASH and environment organization */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define PHYS_FLASH_SIZE (16 << 10) /* 16 MB */ +#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */ #define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) /* addr of environment */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ +#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE } + +/*----------------------------------------------------------------------- + * FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ -#define CFG_ENV_OFFSET 0x20000 /* environment starts here */ +#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_SIZE_REDUND 0x20000 diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 97466c1c79..88d6c462b4 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -159,17 +159,30 @@ /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ +#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */ #define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) /* addr of environment */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + PHYS_FLASH_SECT_SIZE) +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ +#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE } + +/*----------------------------------------------------------------------- + * FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ -#define CFG_ENV_OFFSET 0x20000 /* environment starts here */ +#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */ #endif /* __CONFIG_H */ diff --git a/tools/img2brec.sh b/tools/img2brec.sh new file mode 100644 index 0000000000..0fcdba27d4 --- /dev/null +++ b/tools/img2brec.sh @@ -0,0 +1,388 @@ +#!/bin/sh + +# This script converts binary files (u-boot.bin) into so called +# bootstrap records that are accepted by Motorola's MC9328MX1/L +# (a.k.a. DragaonBall i.MX) in "Bootstrap Mode" +# +# The code for the SynchFlash programming routines is taken from +# Bootloader\Bin\SyncFlash\programBoot_b.txt contained in +# Motorolas LINUX_BSP_0_3_8.tar.gz +# +# The script could easily extended for AMD flash routines. +# +# 2004-06-23 - steven.scholz@imc-berlin.de + +################################################################################# +# From the posting to the U-Boot-Users mailing list, 23 Jun 2004: +# =============================================================== +# I just hacked a simple script that converts u-boot.bin into a text file +# containg processor init code, SynchFlash programming code and U-Boot data in +# form of so called b-records. +# +# This can be used to programm U-Boot into (Synch)Flash using the Bootstrap +# Mode of the MC9328MX1/L +# +# 0AFE1F3410202E2E2E000000002073756363656564/ +# 0AFE1F44102E0A0000206661696C656420210A0000/ +# 0AFE100000 +# ... +# MX1ADS Sync-flash Programming Utility v0.5 2002/08/21 +# +# Source address (stored in 0x0AFE0000): 0x0A000000 +# Target address (stored in 0x0AFE0004): 0x0C000000 +# Size (stored in 0x0AFE0008): 0x0001A320 +# +# Press any key to start programming ... +# Erasing ... +# Blank checking ... +# Programming ... +# Verifying flash ... succeed. +# +# Programming finished. +# +# So no need for a BDI2000 anymore... ;-) +# +# This is working on my MX1ADS eval board. Hope this could be useful for +# someone. +################################################################################# + +if [ "$#" -lt 1 -o "$#" -gt 2 ] ; then + echo "Usage: $0 infile [outfile]" >&2 + echo " $0 u-boot.bin [u-boot.brec]" >&2 + exit 1 +fi + +if [ "$#" -ge 1 ] ; then + INFILE=$1 +fi + +if [ ! -f $INFILE ] ; then + echo "Error: file '$INFILE' does not exist." >&2 + exit 1 +fi + +FILESIZE=`filesize $INFILE` + +output_init() +{ +echo "\ +******************************************** +* Initialize I/O Pad Driving Strength * +******************************************** +0021B80CC4000003AB +******************************************** +* Initialize SDRAM * +******************************************** +00221000C492120200 ; pre-charge command +08200000E4 ; special read + +00221000C4A2120200 ; auto-refresh command +08000000E4 ; 8 special read +08000000E4 ; 8 special read +08000000E4 ; 8 special read +08000000E4 ; 8 special read +08000000E4 ; 8 special read +08000000E4 ; 8 special read +08000000E4 ; 8 special read +08000000E4 ; 8 special read + +00221000C4B2120200 ; set mode register +08111800E4 ; special read + +00221000C482124200 ; set normal mode + " +} + +output_uboot() +{ +echo "\ +******************************************** +* U-Boot image as bootstrap records * +* will be stored in SDRAM at 0x0A000000 * +******************************************** + " + +cat $INFILE | \ +hexdump -v -e "\"0A0%05.5_ax10\" 16/1 \"%02x\"\"\r\n\"" | \ +tr [:lower:] [:upper:] +} + +output_flashprog() +{ +echo "\ +******************************************** +* Address of arguments to flashProg * +* ---------------------------------------- * +* Source : 0x0A000000 * +* Destination : 0x0C000000 * " + +# get the real size of the U-Boot image +printf "* Size : 0x%08X *\r\n" $FILESIZE +printf "********************************************\r\n" +printf "0AFE0000CC0A0000000C000000%08X\r\n" $FILESIZE + +#;0AFE0000CC0A0000000C00000000006000 + +echo "\ +******************************************** +* Flash Program * +******************************************** +0AFE10001008D09FE5AC0000EA00F0A0E1A42DFE0A +0AFE1010100080FE0A0DC0A0E100D82DE904B04CE2 +0AFE1020109820A0E318309FE5003093E5033082E0 +0AFE103010003093E5013003E2FF3003E20300A0E1 +0AFE10401000A81BE9A01DFE0A0DC0A0E100D82DE9 +0AFE10501004B04CE204D04DE20030A0E10D304BE5 +0AFE1060109820A0E330309FE5003093E5033082E0 +0AFE107010003093E5013903E2000053E3F7FFFF0A +0AFE1080104020A0E310309FE5003093E5032082E0 +0AFE1090100D305BE5003082E500A81BE9A01DFE0A +0AFE10A0100DC0A0E100D82DE904B04CE20000A0E1 +0AFE10B010D7FFFFEB0030A0E1FF3003E2000053E3 +0AFE10C010FAFFFF0A10309FE5003093E5003093E5 +0AFE10D010FF3003E20300A0E100A81BE9A01DFE0A +0AFE10E0100DC0A0E100D82DE904B04CE204D04DE2 +0AFE10F0100030A0E10D304BE50D305BE52332A0E1 +0AFE1100100E304BE50E305BE5090053E30300009A +0AFE1110100E305BE5373083E20E304BE5020000EA +0AFE1120100E305BE5303083E20E304BE50E305BE5 +0AFE1130100300A0E1C3FFFFEB0D305BE50F3003E2 +0AFE1140100E304BE50E305BE5090053E30300009A +0AFE1150100E305BE5373083E20E304BE5020000EA +0AFE1160100E305BE5303083E20E304BE50E305BE5 +0AFE1170100300A0E1B3FFFFEB00A81BE90DC0A0E1 +0AFE11801000D82DE904B04CE21CD04DE210000BE5 +0AFE11901014100BE518200BE588009FE5E50200EB +0AFE11A01010301BE51C300BE514301BE520300BE5 +0AFE11B0100030A0E324300BE524201BE518301BE5 +0AFE11C010030052E10000003A120000EA1C004BE2 +0AFE11D010002090E520104BE2003091E500C093E5 +0AFE11E010043083E2003081E5003092E5042082E2 +0AFE11F010002080E50C0053E10200000A0030A0E3 +0AFE12001028300BE5050000EA24301BE5043083E2 +0AFE12101024300BE5E7FFFFEA0130A0E328300BE5 +0AFE12201028001BE500A81BE9E81EFE0A0DC0A0E1 +0AFE12301000D82DE904B04CE214D04DE210000BE5 +0AFE12401014100BE56C009FE5BA0200EB10301BE5 +0AFE12501018300BE50030A0E31C300BE51C201BE5 +0AFE12601014301BE5030052E10000003A0D0000EA +0AFE12701018304BE2002093E5001092E5042082E2 +0AFE128010002083E5010071E30200000A0030A0E3 +0AFE12901020300BE5050000EA1C301BE5043083E2 +0AFE12A0101C300BE5ECFFFFEA0130A0E320300BE5 +0AFE12B01020001BE500A81BE9001FFE0A0DC0A0E1 +0AFE12C01000D82DE904B04CE224D04DE20130A0E3 +0AFE12D01024300BE5A4229FE58139A0E3023A83E2 +0AFE12E010003082E59820A0E390329FE5003093E5 +0AFE12F010033082E0003093E5023903E2000053E3 +0AFE1300100300001A74229FE58139A0E3033A83E2 +0AFE131010003082E568029FE5860200EBAF36A0E3 +0AFE1320100E3883E2003093E510300BE554029FE5 +0AFE133010800200EB10301BE5233CA0E1FF3003E2 +0AFE1340100300A0E165FFFFEB10301BE52338A0E1 +0AFE135010FF3003E20300A0E160FFFFEB10301BE5 +0AFE1360102334A0E1FF3003E20300A0E15BFFFFEB +0AFE13701010305BE50300A0E158FFFFEB0A00A0E3 +0AFE13801030FFFFEB0D00A0E32EFFFFEBAF36A0E3 +0AFE1390100E3883E2043083E2003093E514300BE5 +0AFE13A010E4019FE5630200EB14301BE5233CA0E1 +0AFE13B010FF3003E20300A0E148FFFFEB14301BE5 +0AFE13C0102338A0E1FF3003E20300A0E143FFFFEB +0AFE13D01014301BE52334A0E1FF3003E20300A0E1 +0AFE13E0103EFFFFEB14305BE50300A0E13BFFFFEB +0AFE13F0100A00A0E313FFFFEB0D00A0E311FFFFEB +0AFE140010AF36A0E30E3883E2083083E2003093E5 +0AFE14101018300BE574019FE5460200EB18301BE5 +0AFE142010233CA0E1FF3003E20300A0E12BFFFFEB +0AFE14301018301BE52338A0E1FF3003E20300A0E1 +0AFE14401026FFFFEB18301BE52334A0E1FF3003E2 +0AFE1450100300A0E121FFFFEB18305BE50300A0E1 +0AFE1460101EFFFFEB0A00A0E3F6FEFFEB0D00A0E3 +0AFE147010F4FEFFEBE6FEFFEB0030A0E1FF3003E2 +0AFE148010000053E30000001A020000EA03FFFFEB +0AFE1490102D004BE5F6FFFFEAF4009FE5250200EB +0AFE14A010FEFEFFEB2D004BE5CD0000EBC00000EB +0AFE14B010E0009FE51F0200EB18301BE528300BE5 +0AFE14C01014301BE52C300BE52C001BE5100100EB +0AFE14D01028301BE5013643E228300BE52C301BE5 +0AFE14E010013683E22C300BE528301BE5000053E3 +0AFE14F010F4FFFFCAAE0000EB14001BE518101BE5 +0AFE15001049FFFFEB0030A0E1FF3003E2000053E3 +0AFE151010E6FFFF0A80009FE5060200EB10001BE5 +0AFE15201014101BE518201BE5D00000EB10001BE5 +0AFE15301014101BE518201BE50FFFFFEB0030A0E1 +0AFE154010FF3003E2000053E30200000A4C009FE5 +0AFE155010F80100EB010000EA44009FE5F50100EB +0AFE156010930000EB3C009FE5F20100EB0000A0E3 +0AFE157010A4FEFFEB0030A0E30300A0E100A81BE9 +0AFE158010A01DFE0AA41DFE0AE01DFE0A0C1EFE0A +0AFE159010381EFE0A641EFE0A181FFE0A281FFE0A +0AFE15A0103C1FFE0A481FFE0AB41EFE0A0DC0A0E1 +0AFE15B01000D82DE904B04CE204D04DE210000BE5 +0AFE15C01010301BE5013043E210300BE5010073E3 +0AFE15D010FAFFFF1A00A81BE90DC0A0E100D82DE9 +0AFE15E01004B04CE208D04DE210000BE510301BE5 +0AFE15F01014300BE514301BE50300A0E100A81BE9 +0AFE1600100DC0A0E100D82DE904B04CE204D04DE2 +0AFE1610102228A0E3012A82E2042082E2E134A0E3 +0AFE162010023883E2033C83E2003082E50333A0E3 +0AFE163010053983E2003093E510300BE500A81BE9 +0AFE1640100DC0A0E100D82DE904B04CE204D04DE2 +0AFE1650102228A0E3012A82E2042082E29134A0E3 +0AFE166010023883E2033C83E2003082E5C136A0E3 +0AFE167010003093E510300BE52228A0E3012A82E2 +0AFE168010042082E2E134A0E3023883E2033C83E2 +0AFE169010003082E50333A0E3073983E20020A0E3 +0AFE16A010002083E52228A0E3012A82E2042082E2 +0AFE16B0108134A0E3023883E2033C83E2003082E5 +0AFE16C0100333A0E3003093E510300BE5CBFFFFEB +0AFE16D01010301BE50300A0E100A81BE90DC0A0E1 +0AFE16E01000D82DE904B04CE208D04DE2D3FFFFEB +0AFE16F0100030A0E110300BE510301BE5023503E2 +0AFE170010000053E30500000A10301BE5073703E2 +0AFE171010000053E30100000A10001BE5ADFFFFEB +0AFE17201010301BE5803003E2000053E30500000A +0AFE17301010301BE51C3003E2000053E30100000A +0AFE17401010001BE5A3FFFFEB10201BE50235A0E3 +0AFE175010803083E2030052E10200001A0130A0E3 +0AFE17601014300BE5010000EA0030A0E314300BE5 +0AFE17701014001BE500A81BE90DC0A0E100D82DE9 +0AFE17801004B04CE204D04DE22228A0E3012A82E2 +0AFE179010042082E29134A0E3023883E2033C83E2 +0AFE17A010003082E5C136A0E3003093E510300BE5 +0AFE17B01000A81BE90DC0A0E100D82DE904B04CE2 +0AFE17C010ECFFFFEB2228A0E3012A82E2042082E2 +0AFE17D0108134A0E3023883E2033C83E2003082E5 +0AFE17E01000A81BE90DC0A0E100D82DE904B04CE2 +0AFE17F01004D04DE22228A0E3012A82E2042082E2 +0AFE1800102238A0E3013A83E2043083E2003093E5 +0AFE181010023183E3003082E52228A0E3012A82E2 +0AFE1820102238A0E3013A83E2003093E5023183E3 +0AFE183010003082E5FA0FA0E35BFFFFEB2228A0E3 +0AFE184010012A82E2042082E2B134A0E3023883E2 +0AFE185010033C83E2003082E50333A0E3233983E2 +0AFE186010033B83E2003093E510300BE500A81BE9 +0AFE1870100DC0A0E100D82DE904B04CE21CD04DE2 +0AFE18801010000BE514100BE518200BE50030A0E3 +0AFE1890101C300BE51C201BE518301BE5030052E1 +0AFE18A0100000003A190000EAB2FFFFEB2228A0E3 +0AFE18B010012A82E2042082E2F134A0E3023883E2 +0AFE18C010033C83E2003082E514201BE51C301BE5 +0AFE18D010031082E010201BE51C301BE5033082E0 +0AFE18E010003093E5003081E57BFFFFEB0030A0E1 +0AFE18F010FF3003E2000053E3FAFFFF0AACFFFFEB +0AFE1900101C301BE5043083E21C300BE5E0FFFFEA +0AFE19101000A81BE90DC0A0E100D82DE904B04CE2 +0AFE1920100CD04DE210000BE52228A0E3012A82E2 +0AFE193010042082E28134A0E3023883E2033C83E2 +0AFE194010003082E510301BE5003093E514300BE5 +0AFE1950102228A0E3012A82E2042082E29134A0E3 +0AFE196010023883E2033C83E2003082E510301BE5 +0AFE197010003093E518300BE52228A0E3012A82E2 +0AFE198010042082E2E134A0E3023883E2033C83E2 +0AFE199010003082E50229A0E310301BE5032082E0 +0AFE19A0100030A0E3003082E52228A0E3012A82E2 +0AFE19B010042082E28134A0E3023883E2033C83E2 +0AFE19C010003082E510201BE50D3AA0E3D03083E2 +0AFE19D010033883E1003082E53FFFFFEB0030A0E1 +0AFE19E010FF3003E2000053E3FAFFFF0A70FFFFEB +0AFE19F01000A81BE90DC0A0E100D82DE904B04CE2 +0AFE1A00105CFFFFEB2228A0E3012A82E2042082E2 +0AFE1A1010E134A0E3023883E2033C83E2003082E5 +0AFE1A20100333A0E3033983E20020A0E3002083E5 +0AFE1A30102228A0E3012A82E2042082E28134A0E3 +0AFE1A4010023883E2033C83E2003082E50323A0E3 +0AFE1A5010032982E20339A0E3C03083E2033883E1 +0AFE1A6010003082E500A81BE90DC0A0E100D82DE9 +0AFE1A701004B04CE23FFFFFEB2228A0E3012A82E2 +0AFE1A8010042082E2E134A0E3023883E2033C83E2 +0AFE1A9010003082E50333A0E30A3983E20020A0E3 +0AFE1AA010002083E52228A0E3012A82E2042082E2 +0AFE1AB0108134A0E3023883E2033C83E2003082E5 +0AFE1AC0100323A0E30A2982E20339A0E3C03083E2 +0AFE1AD010033883E1003082E500A81BE90DC0A0E1 +0AFE1AE01000D82DE904B04CE28729A0E3222E82E2 +0AFE1AF0108739A0E3223E83E2003093E51E3CC3E3 +0AFE1B0010003082E58729A0E38E2F82E28739A0E3 +0AFE1B10108E3F83E2003093E51E3CC3E3003082E5 +0AFE1B20108139A0E3823D83E20520A0E3002083E5 +0AFE1B30108129A0E3822D82E2042082E20139A0E3 +0AFE1B4010273083E2003082E58139A0E3823D83E2 +0AFE1B50100C3083E20120A0E3002083E58129A0E3 +0AFE1B6010822D82E2102082E22A3DA0E3013083E2 +0AFE1B7010003082E58139A0E3823D83E2243083E2 +0AFE1B80100F20A0E3002083E58139A0E3823D83E2 +0AFE1B9010283083E28A20A0E3002083E58139A0E3 +0AFE1BA010823D83E22C3083E20820A0E3002083E5 +0AFE1BB01000A81BE90DC0A0E100D82DE904B04CE2 +0AFE1BC0108139A0E3823D83E2183083E2003093E5 +0AFE1BD010013003E2FF3003E20300A0E100A81BE9 +0AFE1BE0100DC0A0E100D82DE904B04CE204D04DE2 +0AFE1BF0100030A0E10D304BE58139A0E3823D83E2 +0AFE1C0010183083E2003093E5013903E2000053E3 +0AFE1C1010F8FFFF0A8139A0E3813D83E20D205BE5 +0AFE1C2010002083E50D305BE50A0053E30A00001A +0AFE1C30108139A0E3823D83E2183083E2003093E5 +0AFE1C4010013903E2000053E3F8FFFF0A8139A0E3 +0AFE1C5010813D83E20D20A0E3002083E500A81BE9 +0AFE1C60100DC0A0E100D82DE904B04CE20000A0E1 +0AFE1C7010CFFFFFEB0030A0E1FF3003E2000053E3 +0AFE1C8010FAFFFF0A8139A0E3023A83E2003093E5 +0AFE1C9010FF3003E20300A0E100A81BE90DC0A0E1 +0AFE1CA01000D82DE904B04CE204D04DE20030A0E1 +0AFE1CB0100D304BE50D305BE52332A0E10E304BE5 +0AFE1CC0100E305BE5090053E30300009A0E305BE5 +0AFE1CD010373083E20E304BE5020000EA0E305BE5 +0AFE1CE010303083E20E304BE50E305BE50300A0E1 +0AFE1CF010BAFFFFEB0D305BE50F3003E20E304BE5 +0AFE1D00100E305BE5090053E30300009A0E305BE5 +0AFE1D1010373083E20E304BE5020000EA0E305BE5 +0AFE1D2010303083E20E304BE50E305BE50300A0E1 +0AFE1D3010AAFFFFEB00A81BE90DC0A0E100D82DE9 +0AFE1D401004B04CE204D04DE210000BE510301BE5 +0AFE1D50100030D3E5000053E30000001A080000EA +0AFE1D601010104BE2003091E50320A0E10020D2E5 +0AFE1D7010013083E2003081E50200A0E197FFFFEB +0AFE1D8008F1FFFFEA00A81BE9 +0AFE1DA4100A0D4D58314144532053796E632D666C +0AFE1DB4106173682050726F6772616D6D696E6720 +0AFE1DC4105574696C6974792076302E3520323030 +0AFE1DD410322F30382F32310A0D000000536F7572 +0AFE1DE41063652061646472657373202873746F72 +0AFE1DF410656420696E2030783041464530303030 +0AFE1E0410293A2030780000005461726765742061 +0AFE1E1410646472657373202873746F7265642069 +0AFE1E24106E2030783041464530303034293A2030 +0AFE1E34107800000053697A652020202020202020 +0AFE1E44102020202873746F72656420696E203078 +0AFE1E54103041464530303038293A203078000000 +0AFE1E6410507265737320616E79206B657920746F +0AFE1E74102073746172742070726F6772616D6D69 +0AFE1E84106E67202E2E2E00000A0D45726173696E +0AFE1E94106720666C617368202E2E2E000A0D5072 +0AFE1EA4106F6772616D6D696E67202E2E2E000000 +0AFE1EB4100A0D50726F6772616D6D696E67206669 +0AFE1EC4106E69736865642E0A0D50726573732027 +0AFE1ED410612720746F20636F6E74696E7565202E +0AFE1EE4102E2E2E000A0D566572696679696E6720 +0AFE1EF410666C617368202E2E2E0000000A0D426C +0AFE1F0410616E6B20636865636B696E67202E2E2E +0AFE1F1410000000000A45726173696E67202E2E2E +0AFE1F2410000000000A50726F6772616D6D696E67 +0AFE1F3410202E2E2E000000002073756363656564 +0AFE1F44102E0A0000206661696C656420210A0000 +0AFE100000 + " +} + +######################################################### + +if [ "$#" -eq 2 ] ; then + output_init > $2 + output_uboot >> $2 + output_flashprog >> $2 +else + output_init; + output_uboot; + output_flashprog; +fi