From: Adrian Schmutzler Date: Fri, 12 Jun 2020 22:36:01 +0000 (+0200) Subject: kirkwood: use real model names for Linksys devices X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=65305cb44869774a7db10c517b871dce5ab46ccb;p=openwrt%2Fstaging%2Fthess.git kirkwood: use real model names for Linksys devices This replaces the internal device names "Audi" and "Viper" with the real model names, which a user would look for. This makes the Linksys devices on this target consistent with the names recently changed for mvebu based on the same idea. As a consequence, the "viper" device definition is split into two separate definitions with the correct names for both real models. Signed-off-by: Adrian Schmutzler --- diff --git a/package/boot/uboot-envtools/files/kirkwood b/package/boot/uboot-envtools/files/kirkwood index a099c925ea..401df74597 100644 --- a/package/boot/uboot-envtools/files/kirkwood +++ b/package/boot/uboot-envtools/files/kirkwood @@ -17,7 +17,8 @@ checkpoint,l-50|\ cloudengines,pogoe02|\ cloudengines,pogoplugv4|\ iom,ix2-200|\ -linksys,viper|\ +linksys,e4200-v2|\ +linksys,ea4500|\ raidsonic,ib-nas62x0|\ seagate,dockstar|\ zyxel,nsa310b|\ @@ -25,7 +26,7 @@ zyxel,nsa310s|\ zyxel,nsa325) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" ;; -linksys,audi) +linksys,ea3500) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x4000" "0x4000" ;; esac diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds index bbe689bbb5..3f7fe71c0a 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/01_leds +++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds @@ -10,10 +10,11 @@ board_config_update board=$(board_name) case "$board" in -"iom,ix2-200") +iom,ix2-200) ucidef_set_led_timer "health" "health" "status:white:rebuild_led" "200" "800" ;; -"linksys,viper") +linksys,e4200-v2|\ +linksys,ea4500) ucidef_set_led_default "pulse" "pulse" "viper:white:pulse" "1" ;; esac diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index 658ce13346..a60b87c912 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -28,8 +28,9 @@ case "$board" in "zyxel,nsa310s") ucidef_set_interface_lan "eth0" "dhcp" ;; -"linksys,audi"|\ -"linksys,viper") +"linksys,e4200-v2"|\ +"linksys,ea3500"|\ +"linksys,ea4500") ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet" ucidef_set_interface_macaddr "wan" $( mtd_get_mac_ascii u_env eth1addr ) ;; diff --git a/target/linux/kirkwood/base-files/etc/board.d/05_compat-version b/target/linux/kirkwood/base-files/etc/board.d/05_compat-version index 8954d69d12..29d1debe58 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/05_compat-version +++ b/target/linux/kirkwood/base-files/etc/board.d/05_compat-version @@ -9,8 +9,9 @@ board_config_update case "$(board_name)" in - linksys,audi|\ - linksys,viper) + linksys,e4200-v2|\ + linksys,ea3500|\ + linksys,ea4500) ucidef_set_compat_version "1.1" ;; esac diff --git a/target/linux/kirkwood/base-files/etc/init.d/bootcount b/target/linux/kirkwood/base-files/etc/init.d/bootcount index 478f3d0134..bbb36eb6ea 100755 --- a/target/linux/kirkwood/base-files/etc/init.d/bootcount +++ b/target/linux/kirkwood/base-files/etc/init.d/bootcount @@ -4,8 +4,9 @@ START=99 boot() { case $(board_name) in - linksys,audi|\ - linksys,viper) + linksys,e4200-v2|\ + linksys,ea3500|\ + linksys,ea4500) mtd resetbc s_env || true ;; esac diff --git a/target/linux/kirkwood/base-files/lib/upgrade/platform.sh b/target/linux/kirkwood/base-files/lib/upgrade/platform.sh index 6d63a0a4b7..8ff1709f2c 100644 --- a/target/linux/kirkwood/base-files/lib/upgrade/platform.sh +++ b/target/linux/kirkwood/base-files/lib/upgrade/platform.sh @@ -11,8 +11,9 @@ platform_do_upgrade() { local board="$(board_name)" case "$board" in - "linksys,audi"|\ - "linksys,viper") + linksys,e4200-v2|\ + linksys,ea3500|\ + linksys,ea4500) platform_do_upgrade_linksys "$1" ;; *) diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-e4200-v2.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-e4200-v2.dts new file mode 100644 index 0000000000..bfd708a677 --- /dev/null +++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-e4200-v2.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "kirkwood-linksys-viper.dts" + +/ { + model = "Linksys E4200 v2 (Viper)"; + compatible = "linksys,e4200-v2", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood"; +}; diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-ea3500.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-ea3500.dts new file mode 100644 index 0000000000..851f316711 --- /dev/null +++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-ea3500.dts @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500 + * + * (c) 2013 Jonas Gorski + * (c) 2013 Deutsche Telekom Innovation Laboratories + * (c) 2014 Luka Perkov + * (c) 2014 Dan Walters + * + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Linksys EA3500 (Audi)"; + compatible = "linksys,ea3500", "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>; + pinctrl-names = "default"; + + wps { + label = "WPS Button"; + linux,code = ; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&pmx_led_green_power>; + pinctrl-names = "default"; + + led_power: power { + label = "audi:green:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&pinctrl { + pmx_led_green_power: pmx-led-green-power { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + + pmx_btn_wps: pmx-btn-wps { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; +}; + +&mdio { + status = "okay"; + + switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <16>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "ethernet1"; + }; + + port@1 { + reg = <1>; + label = "ethernet2"; + }; + + port@2 { + reg = <2>; + label = "ethernet3"; + }; + + port@3 { + reg = <3>; + label = "ethernet4"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&nand { + status = "okay"; + + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u_env"; + reg = <0x80000 0x4000>; + }; + + partition@84000 { + label = "s_env"; + reg = <0x84000 0x4000>; + }; + + partition@200000 { + label = "kernel1"; + reg = <0x200000 0x290000>; + }; + + partition@490000 { + label = "rootfs1"; + reg = <0x490000 0x1170000>; + }; + + partition@1600000 { + label = "kernel2"; + reg = <0x1600000 0x290000>; + }; + + partition@1890000 { + label = "rootfs2"; + reg = <0x1890000 0x1170000>; + }; + + partition@2a00000 { + label = "syscfg"; + reg = <0x2a00000 0x1600000>; + }; + + partition@88000 { + label = "unused"; + reg = <0x88000 0x178000>; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set + * fixed speed and duplex. + */ +ð0 { + status = "okay"; + + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +/* eth1 is connected to the switch at port 6. However DSA only supports a + * single CPU port. This port is disabled to avoid confusion. + */ +ð1 { + status = "disabled"; +}; + +/* There is no battery on the board, so the RTC does not keep + * time when there is no power, making it useless. + */ +&rtc { + status = "disabled"; +}; diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-ea4500.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-ea4500.dts new file mode 100644 index 0000000000..495cff34a4 --- /dev/null +++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-ea4500.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "kirkwood-linksys-viper.dts" + +/ { + model = "Linksys EA4500 (Viper)"; + compatible = "linksys,ea4500", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood"; +}; diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts deleted file mode 100644 index 90250fefc8..0000000000 --- a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500 - * - * (c) 2013 Jonas Gorski - * (c) 2013 Deutsche Telekom Innovation Laboratories - * (c) 2014 Luka Perkov - * (c) 2014 Dan Walters - * - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6282.dtsi" - -/ { - model = "Linksys Audi (EA3500)"; - compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x4000000>; - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>; - pinctrl-names = "default"; - - wps { - label = "WPS Button"; - linux,code = ; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "Reset Button"; - linux,code = ; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&pmx_led_green_power>; - pinctrl-names = "default"; - - led_power: power { - label = "audi:green:power"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; -}; - -&pinctrl { - pmx_led_green_power: pmx-led-green-power { - marvell,pins = "mpp7"; - marvell,function = "gpo"; - }; - - pmx_btn_wps: pmx-btn-wps { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; -}; - -&mdio { - status = "okay"; - - switch@10 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <16>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "ethernet1"; - }; - - port@1 { - reg = <1>; - label = "ethernet2"; - }; - - port@2 { - reg = <2>; - label = "ethernet3"; - }; - - port@3 { - reg = <3>; - label = "ethernet4"; - }; - - port@4 { - reg = <4>; - label = "internet"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð0port>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u_env"; - reg = <0x80000 0x4000>; - }; - - partition@84000 { - label = "s_env"; - reg = <0x84000 0x4000>; - }; - - partition@200000 { - label = "kernel1"; - reg = <0x200000 0x290000>; - }; - - partition@490000 { - label = "rootfs1"; - reg = <0x490000 0x1170000>; - }; - - partition@1600000 { - label = "kernel2"; - reg = <0x1600000 0x290000>; - }; - - partition@1890000 { - label = "rootfs2"; - reg = <0x1890000 0x1170000>; - }; - - partition@2a00000 { - label = "syscfg"; - reg = <0x2a00000 0x1600000>; - }; - - partition@88000 { - label = "unused"; - reg = <0x88000 0x178000>; - }; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set - * fixed speed and duplex. - */ -ð0 { - status = "okay"; - - ethernet0-port@0 { - speed = <1000>; - duplex = <1>; - }; -}; - -/* eth1 is connected to the switch at port 6. However DSA only supports a - * single CPU port. This port is disabled to avoid confusion. - */ -ð1 { - status = "disabled"; -}; - -/* There is no battery on the board, so the RTC does not keep - * time when there is no power, making it useless. - */ -&rtc { - status = "disabled"; -}; diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile index 6554fc2669..3a600da13c 100644 --- a/target/linux/kirkwood/image/Makefile +++ b/target/linux/kirkwood/image/Makefile @@ -96,34 +96,47 @@ define Device/iom_ix2-200 endef TARGET_DEVICES += iom_ix2-200 -define Device/linksys_audi - $(Device/dsa-migration) +define Device/linksys DEVICE_VENDOR := Linksys - DEVICE_MODEL := EA3500 (Audi) DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug + KERNEL_IN_UBI := + UBINIZE_OPTS := -E 5 + IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi +endef + +define Device/linksys_e4200-v2 + $(Device/linksys) + $(Device/dsa-migration) + DEVICE_MODEL := E4200 + DEVICE_VARIANT := v2 + DEVICE_DTS := kirkwood-e4200-v2 + KERNEL_SIZE := 2688k + SUPPORTED_DEVICES += linksys,viper linksys-viper +endef +TARGET_DEVICES += linksys_e4200-v2 + +define Device/linksys_ea3500 + $(Device/linksys) + $(Device/dsa-migration) + DEVICE_MODEL := EA3500 + DEVICE_DTS := kirkwood-ea3500 PAGESIZE := 512 SUBPAGESIZE := 256 BLOCKSIZE := 16k KERNEL_SIZE := 2624k - KERNEL_IN_UBI := - UBINIZE_OPTS := -E 5 - IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi - BOARD_NAME := linksys-audi + SUPPORTED_DEVICES += linksys,audi linksys-audi endef -TARGET_DEVICES += linksys_audi +TARGET_DEVICES += linksys_ea3500 -define Device/linksys_viper +define Device/linksys_ea4500 + $(Device/linksys) $(Device/dsa-migration) - DEVICE_VENDOR := Linksys - DEVICE_MODEL := E4200v2 / EA4500 (Viper) - DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug + DEVICE_MODEL := EA4500 + DEVICE_DTS := kirkwood-ea4500 KERNEL_SIZE := 2688k - KERNEL_IN_UBI := - UBINIZE_OPTS := -E 5 - IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi - BOARD_NAME := linksys-viper + SUPPORTED_DEVICES += linksys,viper linksys-viper endef -TARGET_DEVICES += linksys_viper +TARGET_DEVICES += linksys_ea4500 define Device/raidsonic_ib-nas62x0 DEVICE_VENDOR := RaidSonic diff --git a/target/linux/kirkwood/patches-5.4/105-ea4500.patch b/target/linux/kirkwood/patches-5.4/105-ea4500.patch deleted file mode 100644 index 0d97ad14a2..0000000000 --- a/target/linux/kirkwood/patches-5.4/105-ea4500.patch +++ /dev/null @@ -1,52 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts -+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts -@@ -24,6 +24,10 @@ - }; - - aliases { -+ led-boot = &led_white_health; -+ led-failsafe = &led_white_health; -+ led-running = &led_white_health; -+ led-upgrade = &led_white_health; - serial0 = &uart0; - }; - -@@ -56,9 +60,10 @@ - pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; - pinctrl-names = "default"; - -- white-health { -+ led_white_health: white-health { - label = "viper:white:health"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; - }; - - white-pulse { -@@ -114,22 +119,22 @@ - }; - - partition@200000 { -- label = "kernel"; -+ label = "kernel1"; - reg = <0x200000 0x2A0000>; - }; - - partition@4a0000 { -- label = "rootfs"; -+ label = "rootfs1"; - reg = <0x4A0000 0x1760000>; - }; - - partition@1c00000 { -- label = "alt_kernel"; -+ label = "kernel2"; - reg = <0x1C00000 0x2A0000>; - }; - - partition@1ea0000 { -- label = "alt_rootfs"; -+ label = "rootfs2"; - reg = <0x1EA0000 0x1760000>; - }; - diff --git a/target/linux/kirkwood/patches-5.4/105-linksys-viper-dts.patch b/target/linux/kirkwood/patches-5.4/105-linksys-viper-dts.patch new file mode 100644 index 0000000000..0d97ad14a2 --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/105-linksys-viper-dts.patch @@ -0,0 +1,52 @@ +--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts ++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts +@@ -24,6 +24,10 @@ + }; + + aliases { ++ led-boot = &led_white_health; ++ led-failsafe = &led_white_health; ++ led-running = &led_white_health; ++ led-upgrade = &led_white_health; + serial0 = &uart0; + }; + +@@ -56,9 +60,10 @@ + pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; + pinctrl-names = "default"; + +- white-health { ++ led_white_health: white-health { + label = "viper:white:health"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; + }; + + white-pulse { +@@ -114,22 +119,22 @@ + }; + + partition@200000 { +- label = "kernel"; ++ label = "kernel1"; + reg = <0x200000 0x2A0000>; + }; + + partition@4a0000 { +- label = "rootfs"; ++ label = "rootfs1"; + reg = <0x4A0000 0x1760000>; + }; + + partition@1c00000 { +- label = "alt_kernel"; ++ label = "kernel2"; + reg = <0x1C00000 0x2A0000>; + }; + + partition@1ea0000 { +- label = "alt_rootfs"; ++ label = "rootfs2"; + reg = <0x1EA0000 0x1760000>; + }; +