From: Robert Marko <robimarko@gmail.com>
Date: Thu, 25 Jan 2024 21:19:58 +0000 (+0100)
Subject: qualcommax: 301w: provide AQR FW via NVMEM cells
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=652d72260d816fe493e9453c472ce5c0c85240f3;p=openwrt%2Fstaging%2Fblocktrron.git

qualcommax: 301w: provide AQR FW via NVMEM cells

In order to get rid of having to modify U-boot bootcmd and having U-boot
load the Aquantia PHY-s firmware lets use some of the free space on SPI-NOR
to add a second ethphyfw partition and be able to load AQR FW via NVMEM
cells.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
index 8b392c0fba..572812ec39 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
@@ -260,7 +260,99 @@
 		spi-max-frequency = <50000000>;
 
 		partitions {
-			compatible = "qcom,smem-part";
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:sbl1";
+				reg = <0x0 0x50000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "0:mibib";
+				reg = <0x50000 0x10000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "0:qsee";
+				reg = <0x60000 0x180000>;
+				read-only;
+			};
+
+			partition@1e0000 {
+				label = "0:devcfg";
+				reg = <0x1e0000 0x10000>;
+				read-only;
+			};
+
+			partition@1f0000 {
+				label = "0:apdp";
+				reg = <0x1f0000 0x10000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "0:rpm";
+				reg = <0x200000 0x40000>;
+				read-only;
+			};
+
+			partition@240000 {
+				label = "0:cdt";
+				reg = <0x240000 0x10000>;
+				read-only;
+			};
+
+			partition@250000 {
+				label = "0:appsblenv";
+				reg = <0x250000 0x20000>;
+			};
+
+			partition@270000 {
+				label = "0:appsbl";
+				reg = <0x250000 0x100000>;
+				read-only;
+			};
+
+			partition@370000 {
+				label = "0:art";
+				reg = <0x370000 0x40000>;
+				read-only;
+			};
+
+			partition@3b0000 {
+				label = "0:ethphyfw1";
+				reg = <0x3b0000 0x80000>;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				aqr0_fw: firmware@0 {
+					reg = <0x0 0x5fc02>;
+				};
+			};
+
+			partition@430000 {
+				label = "0:ethphyfw2";
+				reg = <0x430000 0x80000>;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				aqr1_fw: firmware@0 {
+					reg = <0x0 0x5fc02>;
+				};
+			};
+
+			partition@4b0000 {
+				label = "reserved";
+				reg = <0x4b0000 0x350000>;
+			};
 		};
 	};
 };
@@ -277,6 +369,8 @@
 		reg = <0>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
 		firmware-name = "marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld";
+		nvmem-cell-names = "firmware";
+		nvmem-cells = <&aqr0_fw>;
 	};
 
 	aqr113c_8: ethernet-phy@8 {
@@ -284,6 +378,8 @@
 		reg = <8>;
 		reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
 		firmware-name = "marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld";
+		nvmem-cell-names = "firmware";
+		nvmem-cells = <&aqr1_fw>;
 	};
 
 	qca8075_16: ethernet-phy@16 {