From: Tianling Shen Date: Sat, 13 May 2023 05:54:38 +0000 (+0800) Subject: kernel: backport Motorcomm YT8521/YT8531 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=64afcbad3d69147b07dff2462e5645f2c193dee5;p=openwrt%2Fstaging%2Fnbd.git kernel: backport Motorcomm YT8521/YT8531 support It will be used on NanoPi R2C and OrangePi R1 Plus LTS board. Signed-off-by: Tianling Shen --- diff --git a/target/linux/bcm27xx/patches-5.15/950-0281-media-i2c-Add-driver-for-Sony-IMX477-sensor.patch b/target/linux/bcm27xx/patches-5.15/950-0281-media-i2c-Add-driver-for-Sony-IMX477-sensor.patch index bbf071cb01..e756fa2fff 100644 --- a/target/linux/bcm27xx/patches-5.15/950-0281-media-i2c-Add-driver-for-Sony-IMX477-sensor.patch +++ b/target/linux/bcm27xx/patches-5.15/950-0281-media-i2c-Add-driver-for-Sony-IMX477-sensor.patch @@ -25,7 +25,7 @@ Signed-off-by: Naushir Patuck --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -17537,6 +17537,14 @@ T: git git://linuxtv.org/media_tree.git +@@ -17538,6 +17538,14 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml F: drivers/media/i2c/imx412.c diff --git a/target/linux/bcm27xx/patches-5.15/950-0413-Documentation-devicetree-Add-documentation-for-imx37.patch b/target/linux/bcm27xx/patches-5.15/950-0413-Documentation-devicetree-Add-documentation-for-imx37.patch index f006899069..27fd0e5793 100644 --- a/target/linux/bcm27xx/patches-5.15/950-0413-Documentation-devicetree-Add-documentation-for-imx37.patch +++ b/target/linux/bcm27xx/patches-5.15/950-0413-Documentation-devicetree-Add-documentation-for-imx37.patch @@ -132,7 +132,7 @@ Signed-off-by: David Plowman +... --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -17551,6 +17551,7 @@ M: Raspberry Pi Kernel Maintenance +... --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -17555,6 +17555,14 @@ F: Documentation/devicetree/bindings/med +@@ -17556,6 +17556,14 @@ F: Documentation/devicetree/bindings/med F: Documentation/devicetree/bindings/media/i2c/imx477.yaml F: drivers/media/i2c/imx477.c diff --git a/target/linux/generic/backport-5.15/790-v6.0-net-mii-add-mii_bmcr_encode_fixed.patch b/target/linux/generic/backport-5.15/790-v6.0-net-mii-add-mii_bmcr_encode_fixed.patch new file mode 100644 index 0000000000..87d7ff6154 --- /dev/null +++ b/target/linux/generic/backport-5.15/790-v6.0-net-mii-add-mii_bmcr_encode_fixed.patch @@ -0,0 +1,55 @@ +From bdb6cfe7512f7a214815a3092f0be50963dcacbc Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Sat, 18 Jun 2022 11:28:32 +0100 +Subject: [PATCH] net: mii: add mii_bmcr_encode_fixed() + +Add a function to encode a fixed speed/duplex to a BMCR value. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + include/linux/mii.h | 35 +++++++++++++++++++++++++++++++++++ + 1 file changed, 35 insertions(+) + +--- a/include/linux/mii.h ++++ b/include/linux/mii.h +@@ -595,4 +595,39 @@ static inline u8 mii_resolve_flowctrl_fd + return cap; + } + ++/** ++ * mii_bmcr_encode_fixed - encode fixed speed/duplex settings to a BMCR value ++ * @speed: a SPEED_* value ++ * @duplex: a DUPLEX_* value ++ * ++ * Encode the speed and duplex to a BMCR value. 2500, 1000, 100 and 10 Mbps are ++ * supported. 2500Mbps is encoded to 1000Mbps. Other speeds are encoded as 10 ++ * Mbps. Unknown duplex values are encoded to half-duplex. ++ */ ++static inline u16 mii_bmcr_encode_fixed(int speed, int duplex) ++{ ++ u16 bmcr; ++ ++ switch (speed) { ++ case SPEED_2500: ++ case SPEED_1000: ++ bmcr = BMCR_SPEED1000; ++ break; ++ ++ case SPEED_100: ++ bmcr = BMCR_SPEED100; ++ break; ++ ++ case SPEED_10: ++ default: ++ bmcr = BMCR_SPEED10; ++ break; ++ } ++ ++ if (duplex == DUPLEX_FULL) ++ bmcr |= BMCR_FULLDPLX; ++ ++ return bmcr; ++} ++ + #endif /* __LINUX_MII_H__ */ diff --git a/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch b/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch new file mode 100644 index 0000000000..57137c34fc --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch @@ -0,0 +1,1724 @@ +From 70479a40954cf353e87a486997a3477108c75aa9 Mon Sep 17 00:00:00 2001 +From: Frank +Date: Fri, 28 Oct 2022 17:26:21 +0800 +Subject: [PATCH] net: phy: Add driver for Motorcomm yt8521 gigabit ethernet + phy + +Add a driver for the motorcomm yt8521 gigabit ethernet phy. We have verified + the driver on StarFive VisionFive development board, which is developed by + Shanghai StarFive Technology Co., Ltd.. On the board, yt8521 gigabit ethernet + phy works in utp mode, RGMII interface, supports 1000M/100M/10M speeds, and + wol(magic package). + +Signed-off-by: Frank +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + MAINTAINERS | 1 + + drivers/net/phy/Kconfig | 2 +- + drivers/net/phy/motorcomm.c | 1635 ++++++++++++++++++++++++++++++++++- + 3 files changed, 1635 insertions(+), 3 deletions(-) + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -12697,6 +12697,7 @@ F: include/uapi/linux/meye.h + + MOTORCOMM PHY DRIVER + M: Peter Geis ++M: Frank + L: netdev@vger.kernel.org + S: Maintained + F: drivers/net/phy/motorcomm.c +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -245,7 +245,7 @@ config MOTORCOMM_PHY + tristate "Motorcomm PHYs" + help + Enables support for Motorcomm network PHYs. +- Currently supports the YT8511 gigabit PHY. ++ Currently supports the YT8511, YT8521 Gigabit Ethernet PHYs. + + config NATIONAL_PHY + tristate "National Semiconductor PHYs" +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -1,15 +1,106 @@ + // SPDX-License-Identifier: GPL-2.0+ + /* +- * Driver for Motorcomm PHYs ++ * Motorcomm 8511/8521 PHY driver. + * + * Author: Peter Geis ++ * Author: Frank + */ + ++#include + #include + #include + #include + + #define PHY_ID_YT8511 0x0000010a ++#define PHY_ID_YT8521 0x0000011A ++ ++/* YT8521 Register Overview ++ * UTP Register space | FIBER Register space ++ * ------------------------------------------------------------ ++ * | UTP MII | FIBER MII | ++ * | UTP MMD | | ++ * | UTP Extended | FIBER Extended | ++ * ------------------------------------------------------------ ++ * | Common Extended | ++ * ------------------------------------------------------------ ++ */ ++ ++/* 0x10 ~ 0x15 , 0x1E and 0x1F are common MII registers of yt phy */ ++ ++/* Specific Function Control Register */ ++#define YTPHY_SPECIFIC_FUNCTION_CONTROL_REG 0x10 ++ ++/* 2b00 Manual MDI configuration ++ * 2b01 Manual MDIX configuration ++ * 2b10 Reserved ++ * 2b11 Enable automatic crossover for all modes *default* ++ */ ++#define YTPHY_SFCR_MDI_CROSSOVER_MODE_MASK (BIT(6) | BIT(5)) ++#define YTPHY_SFCR_CROSSOVER_EN BIT(3) ++#define YTPHY_SFCR_SQE_TEST_EN BIT(2) ++#define YTPHY_SFCR_POLARITY_REVERSAL_EN BIT(1) ++#define YTPHY_SFCR_JABBER_DIS BIT(0) ++ ++/* Specific Status Register */ ++#define YTPHY_SPECIFIC_STATUS_REG 0x11 ++#define YTPHY_SSR_SPEED_MODE_OFFSET 14 ++ ++#define YTPHY_SSR_SPEED_MODE_MASK (BIT(15) | BIT(14)) ++#define YTPHY_SSR_SPEED_10M 0x0 ++#define YTPHY_SSR_SPEED_100M 0x1 ++#define YTPHY_SSR_SPEED_1000M 0x2 ++#define YTPHY_SSR_DUPLEX_OFFSET 13 ++#define YTPHY_SSR_DUPLEX BIT(13) ++#define YTPHY_SSR_PAGE_RECEIVED BIT(12) ++#define YTPHY_SSR_SPEED_DUPLEX_RESOLVED BIT(11) ++#define YTPHY_SSR_LINK BIT(10) ++#define YTPHY_SSR_MDIX_CROSSOVER BIT(6) ++#define YTPHY_SSR_DOWNGRADE BIT(5) ++#define YTPHY_SSR_TRANSMIT_PAUSE BIT(3) ++#define YTPHY_SSR_RECEIVE_PAUSE BIT(2) ++#define YTPHY_SSR_POLARITY BIT(1) ++#define YTPHY_SSR_JABBER BIT(0) ++ ++/* Interrupt enable Register */ ++#define YTPHY_INTERRUPT_ENABLE_REG 0x12 ++#define YTPHY_IER_WOL BIT(6) ++ ++/* Interrupt Status Register */ ++#define YTPHY_INTERRUPT_STATUS_REG 0x13 ++#define YTPHY_ISR_AUTONEG_ERR BIT(15) ++#define YTPHY_ISR_SPEED_CHANGED BIT(14) ++#define YTPHY_ISR_DUPLEX_CHANGED BIT(13) ++#define YTPHY_ISR_PAGE_RECEIVED BIT(12) ++#define YTPHY_ISR_LINK_FAILED BIT(11) ++#define YTPHY_ISR_LINK_SUCCESSED BIT(10) ++#define YTPHY_ISR_WOL BIT(6) ++#define YTPHY_ISR_WIRESPEED_DOWNGRADE BIT(5) ++#define YTPHY_ISR_SERDES_LINK_FAILED BIT(3) ++#define YTPHY_ISR_SERDES_LINK_SUCCESSED BIT(2) ++#define YTPHY_ISR_POLARITY_CHANGED BIT(1) ++#define YTPHY_ISR_JABBER_HAPPENED BIT(0) ++ ++/* Speed Auto Downgrade Control Register */ ++#define YTPHY_SPEED_AUTO_DOWNGRADE_CONTROL_REG 0x14 ++#define YTPHY_SADCR_SPEED_DOWNGRADE_EN BIT(5) ++ ++/* If these bits are set to 3, the PHY attempts five times ( 3(set value) + ++ * additional 2) before downgrading, default 0x3 ++ */ ++#define YTPHY_SADCR_SPEED_RETRY_LIMIT (0x3 << 2) ++ ++/* Rx Error Counter Register */ ++#define YTPHY_RX_ERROR_COUNTER_REG 0x15 ++ ++/* Extended Register's Address Offset Register */ ++#define YTPHY_PAGE_SELECT 0x1E ++ ++/* Extended Register's Data Register */ ++#define YTPHY_PAGE_DATA 0x1F ++ ++/* FIBER Auto-Negotiation link partner ability */ ++#define YTPHY_FLPA_PAUSE (0x3 << 7) ++#define YTPHY_FLPA_ASYM_PAUSE (0x2 << 7) + + #define YT8511_PAGE_SELECT 0x1e + #define YT8511_PAGE 0x1f +@@ -38,6 +129,352 @@ + #define YT8511_DELAY_FE_TX_EN (0xf << 12) + #define YT8511_DELAY_FE_TX_DIS (0x2 << 12) + ++/* Extended register is different from MMD Register and MII Register. ++ * We can use ytphy_read_ext/ytphy_write_ext/ytphy_modify_ext function to ++ * operate extended register. ++ * Extended Register start ++ */ ++ ++/* Phy gmii clock gating Register */ ++#define YT8521_CLOCK_GATING_REG 0xC ++#define YT8521_CGR_RX_CLK_EN BIT(12) ++ ++#define YT8521_EXTREG_SLEEP_CONTROL1_REG 0x27 ++#define YT8521_ESC1R_SLEEP_SW BIT(15) ++#define YT8521_ESC1R_PLLON_SLP BIT(14) ++ ++/* Phy fiber Link timer cfg2 Register */ ++#define YT8521_LINK_TIMER_CFG2_REG 0xA5 ++#define YT8521_LTCR_EN_AUTOSEN BIT(15) ++ ++/* 0xA000, 0xA001, 0xA003 ,and 0xA006 ~ 0xA00A are common ext registers ++ * of yt8521 phy. There is no need to switch reg space when operating these ++ * registers. ++ */ ++ ++#define YT8521_REG_SPACE_SELECT_REG 0xA000 ++#define YT8521_RSSR_SPACE_MASK BIT(1) ++#define YT8521_RSSR_FIBER_SPACE (0x1 << 1) ++#define YT8521_RSSR_UTP_SPACE (0x0 << 1) ++#define YT8521_RSSR_TO_BE_ARBITRATED (0xFF) ++ ++#define YT8521_CHIP_CONFIG_REG 0xA001 ++#define YT8521_CCR_SW_RST BIT(15) ++ ++#define YT8521_CCR_MODE_SEL_MASK (BIT(2) | BIT(1) | BIT(0)) ++#define YT8521_CCR_MODE_UTP_TO_RGMII 0 ++#define YT8521_CCR_MODE_FIBER_TO_RGMII 1 ++#define YT8521_CCR_MODE_UTP_FIBER_TO_RGMII 2 ++#define YT8521_CCR_MODE_UTP_TO_SGMII 3 ++#define YT8521_CCR_MODE_SGPHY_TO_RGMAC 4 ++#define YT8521_CCR_MODE_SGMAC_TO_RGPHY 5 ++#define YT8521_CCR_MODE_UTP_TO_FIBER_AUTO 6 ++#define YT8521_CCR_MODE_UTP_TO_FIBER_FORCE 7 ++ ++/* 3 phy polling modes,poll mode combines utp and fiber mode*/ ++#define YT8521_MODE_FIBER 0x1 ++#define YT8521_MODE_UTP 0x2 ++#define YT8521_MODE_POLL 0x3 ++ ++#define YT8521_RGMII_CONFIG1_REG 0xA003 ++ ++/* TX Gig-E Delay is bits 3:0, default 0x1 ++ * TX Fast-E Delay is bits 7:4, default 0xf ++ * RX Delay is bits 13:10, default 0x0 ++ * Delay = 150ps * N ++ * On = 2250ps, off = 0ps ++ */ ++#define YT8521_RC1R_RX_DELAY_MASK (0xF << 10) ++#define YT8521_RC1R_RX_DELAY_EN (0xF << 10) ++#define YT8521_RC1R_RX_DELAY_DIS (0x0 << 10) ++#define YT8521_RC1R_FE_TX_DELAY_MASK (0xF << 4) ++#define YT8521_RC1R_FE_TX_DELAY_EN (0xF << 4) ++#define YT8521_RC1R_FE_TX_DELAY_DIS (0x0 << 4) ++#define YT8521_RC1R_GE_TX_DELAY_MASK (0xF << 0) ++#define YT8521_RC1R_GE_TX_DELAY_EN (0xF << 0) ++#define YT8521_RC1R_GE_TX_DELAY_DIS (0x0 << 0) ++ ++#define YTPHY_MISC_CONFIG_REG 0xA006 ++#define YTPHY_MCR_FIBER_SPEED_MASK BIT(0) ++#define YTPHY_MCR_FIBER_1000BX (0x1 << 0) ++#define YTPHY_MCR_FIBER_100FX (0x0 << 0) ++ ++/* WOL MAC ADDR: MACADDR2(highest), MACADDR1(middle), MACADDR0(lowest) */ ++#define YTPHY_WOL_MACADDR2_REG 0xA007 ++#define YTPHY_WOL_MACADDR1_REG 0xA008 ++#define YTPHY_WOL_MACADDR0_REG 0xA009 ++ ++#define YTPHY_WOL_CONFIG_REG 0xA00A ++#define YTPHY_WCR_INTR_SEL BIT(6) ++#define YTPHY_WCR_ENABLE BIT(3) ++ ++/* 2b00 84ms ++ * 2b01 168ms *default* ++ * 2b10 336ms ++ * 2b11 672ms ++ */ ++#define YTPHY_WCR_PULSE_WIDTH_MASK (BIT(2) | BIT(1)) ++#define YTPHY_WCR_PULSE_WIDTH_672MS (BIT(2) | BIT(1)) ++ ++/* 1b0 Interrupt and WOL events is level triggered and active LOW *default* ++ * 1b1 Interrupt and WOL events is pulse triggered and active LOW ++ */ ++#define YTPHY_WCR_TYPE_PULSE BIT(0) ++ ++/* Extended Register end */ ++ ++struct yt8521_priv { ++ /* combo_advertising is used for case of YT8521 in combo mode, ++ * this means that yt8521 may work in utp or fiber mode which depends ++ * on which media is connected (YT8521_RSSR_TO_BE_ARBITRATED). ++ */ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(combo_advertising); ++ ++ /* YT8521_MODE_FIBER / YT8521_MODE_UTP / YT8521_MODE_POLL*/ ++ u8 polling_mode; ++ u8 strap_mode; /* 8 working modes */ ++ /* current reg page of yt8521 phy: ++ * YT8521_RSSR_UTP_SPACE ++ * YT8521_RSSR_FIBER_SPACE ++ * YT8521_RSSR_TO_BE_ARBITRATED ++ */ ++ u8 reg_page; ++}; ++ ++/** ++ * ytphy_read_ext() - read a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to read ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns the value of regnum reg or negative error code ++ */ ++static int ytphy_read_ext(struct phy_device *phydev, u16 regnum) ++{ ++ int ret; ++ ++ ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); ++ if (ret < 0) ++ return ret; ++ ++ return __phy_read(phydev, YTPHY_PAGE_DATA); ++} ++ ++/** ++ * ytphy_read_ext_with_lock() - read a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to read ++ * ++ * returns the value of regnum reg or negative error code ++ */ ++static int ytphy_read_ext_with_lock(struct phy_device *phydev, u16 regnum) ++{ ++ int ret; ++ ++ phy_lock_mdio_bus(phydev); ++ ret = ytphy_read_ext(phydev, regnum); ++ phy_unlock_mdio_bus(phydev); ++ ++ return ret; ++} ++ ++/** ++ * ytphy_write_ext() - write a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to write ++ * @val: value to write to @regnum ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative error code ++ */ ++static int ytphy_write_ext(struct phy_device *phydev, u16 regnum, u16 val) ++{ ++ int ret; ++ ++ ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); ++ if (ret < 0) ++ return ret; ++ ++ return __phy_write(phydev, YTPHY_PAGE_DATA, val); ++} ++ ++/** ++ * ytphy_write_ext_with_lock() - write a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to write ++ * @val: value to write to @regnum ++ * ++ * returns 0 or negative error code ++ */ ++static int ytphy_write_ext_with_lock(struct phy_device *phydev, u16 regnum, ++ u16 val) ++{ ++ int ret; ++ ++ phy_lock_mdio_bus(phydev); ++ ret = ytphy_write_ext(phydev, regnum, val); ++ phy_unlock_mdio_bus(phydev); ++ ++ return ret; ++} ++ ++/** ++ * ytphy_modify_ext() - bits modify a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to write ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * NOTE: Convenience function which allows a PHY's extended register to be ++ * modified as new register value = (old register value & ~mask) | set. ++ * The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative error code ++ */ ++static int ytphy_modify_ext(struct phy_device *phydev, u16 regnum, u16 mask, ++ u16 set) ++{ ++ int ret; ++ ++ ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); ++ if (ret < 0) ++ return ret; ++ ++ return __phy_modify(phydev, YTPHY_PAGE_DATA, mask, set); ++} ++ ++/** ++ * ytphy_modify_ext_with_lock() - bits modify a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to write ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * NOTE: Convenience function which allows a PHY's extended register to be ++ * modified as new register value = (old register value & ~mask) | set. ++ * ++ * returns 0 or negative error code ++ */ ++static int ytphy_modify_ext_with_lock(struct phy_device *phydev, u16 regnum, ++ u16 mask, u16 set) ++{ ++ int ret; ++ ++ phy_lock_mdio_bus(phydev); ++ ret = ytphy_modify_ext(phydev, regnum, mask, set); ++ phy_unlock_mdio_bus(phydev); ++ ++ return ret; ++} ++ ++/** ++ * ytphy_get_wol() - report whether wake-on-lan is enabled ++ * @phydev: a pointer to a &struct phy_device ++ * @wol: a pointer to a &struct ethtool_wolinfo ++ * ++ * NOTE: YTPHY_WOL_CONFIG_REG is common ext reg. ++ */ ++static void ytphy_get_wol(struct phy_device *phydev, ++ struct ethtool_wolinfo *wol) ++{ ++ int wol_config; ++ ++ wol->supported = WAKE_MAGIC; ++ wol->wolopts = 0; ++ ++ wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); ++ if (wol_config < 0) ++ return; ++ ++ if (wol_config & YTPHY_WCR_ENABLE) ++ wol->wolopts |= WAKE_MAGIC; ++} ++ ++/** ++ * ytphy_set_wol() - turn wake-on-lan on or off ++ * @phydev: a pointer to a &struct phy_device ++ * @wol: a pointer to a &struct ethtool_wolinfo ++ * ++ * NOTE: YTPHY_WOL_CONFIG_REG, YTPHY_WOL_MACADDR2_REG, YTPHY_WOL_MACADDR1_REG ++ * and YTPHY_WOL_MACADDR0_REG are common ext reg. The ++ * YTPHY_INTERRUPT_ENABLE_REG of UTP is special, fiber also use this register. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) ++{ ++ struct net_device *p_attached_dev; ++ const u16 mac_addr_reg[] = { ++ YTPHY_WOL_MACADDR2_REG, ++ YTPHY_WOL_MACADDR1_REG, ++ YTPHY_WOL_MACADDR0_REG, ++ }; ++ const u8 *mac_addr; ++ int old_page; ++ int ret = 0; ++ u16 mask; ++ u16 val; ++ u8 i; ++ ++ if (wol->wolopts & WAKE_MAGIC) { ++ p_attached_dev = phydev->attached_dev; ++ if (!p_attached_dev) ++ return -ENODEV; ++ ++ mac_addr = (const u8 *)p_attached_dev->dev_addr; ++ if (!is_valid_ether_addr(mac_addr)) ++ return -EINVAL; ++ ++ /* lock mdio bus then switch to utp reg space */ ++ old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ /* Store the device address for the magic packet */ ++ for (i = 0; i < 3; i++) { ++ ret = ytphy_write_ext(phydev, mac_addr_reg[i], ++ ((mac_addr[i * 2] << 8)) | ++ (mac_addr[i * 2 + 1])); ++ if (ret < 0) ++ goto err_restore_page; ++ } ++ ++ /* Enable WOL feature */ ++ mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL; ++ val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ++ val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS; ++ ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, val); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ /* Enable WOL interrupt */ ++ ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0, ++ YTPHY_IER_WOL); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ } else { ++ old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ /* Disable WOL feature */ ++ mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ++ ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, 0); ++ ++ /* Disable WOL interrupt */ ++ ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, ++ YTPHY_IER_WOL, 0); ++ if (ret < 0) ++ goto err_restore_page; ++ } ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ + static int yt8511_read_page(struct phy_device *phydev) + { + return __phy_read(phydev, YT8511_PAGE_SELECT); +@@ -111,6 +548,1181 @@ err_restore_page: + return phy_restore_page(phydev, oldpage, ret); + } + ++/** ++ * yt8521_read_page() - read reg page ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns current reg space of yt8521 (YT8521_RSSR_FIBER_SPACE/ ++ * YT8521_RSSR_UTP_SPACE) or negative errno code ++ */ ++static int yt8521_read_page(struct phy_device *phydev) ++{ ++ int old_page; ++ ++ old_page = ytphy_read_ext(phydev, YT8521_REG_SPACE_SELECT_REG); ++ if (old_page < 0) ++ return old_page; ++ ++ if ((old_page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE) ++ return YT8521_RSSR_FIBER_SPACE; ++ ++ return YT8521_RSSR_UTP_SPACE; ++}; ++ ++/** ++ * yt8521_write_page() - write reg page ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to write. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_write_page(struct phy_device *phydev, int page) ++{ ++ int mask = YT8521_RSSR_SPACE_MASK; ++ int set; ++ ++ if ((page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE) ++ set = YT8521_RSSR_FIBER_SPACE; ++ else ++ set = YT8521_RSSR_UTP_SPACE; ++ ++ return ytphy_modify_ext(phydev, YT8521_REG_SPACE_SELECT_REG, mask, set); ++}; ++ ++/** ++ * yt8521_probe() - read chip config then set suitable polling_mode ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_probe(struct phy_device *phydev) ++{ ++ struct device *dev = &phydev->mdio.dev; ++ struct yt8521_priv *priv; ++ int chip_config; ++ int ret; ++ ++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ phydev->priv = priv; ++ ++ chip_config = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG); ++ if (chip_config < 0) ++ return chip_config; ++ ++ priv->strap_mode = chip_config & YT8521_CCR_MODE_SEL_MASK; ++ switch (priv->strap_mode) { ++ case YT8521_CCR_MODE_FIBER_TO_RGMII: ++ case YT8521_CCR_MODE_SGPHY_TO_RGMAC: ++ case YT8521_CCR_MODE_SGMAC_TO_RGPHY: ++ priv->polling_mode = YT8521_MODE_FIBER; ++ priv->reg_page = YT8521_RSSR_FIBER_SPACE; ++ phydev->port = PORT_FIBRE; ++ break; ++ case YT8521_CCR_MODE_UTP_FIBER_TO_RGMII: ++ case YT8521_CCR_MODE_UTP_TO_FIBER_AUTO: ++ case YT8521_CCR_MODE_UTP_TO_FIBER_FORCE: ++ priv->polling_mode = YT8521_MODE_POLL; ++ priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED; ++ phydev->port = PORT_NONE; ++ break; ++ case YT8521_CCR_MODE_UTP_TO_SGMII: ++ case YT8521_CCR_MODE_UTP_TO_RGMII: ++ priv->polling_mode = YT8521_MODE_UTP; ++ priv->reg_page = YT8521_RSSR_UTP_SPACE; ++ phydev->port = PORT_TP; ++ break; ++ } ++ /* set default reg space */ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ ret = ytphy_write_ext_with_lock(phydev, ++ YT8521_REG_SPACE_SELECT_REG, ++ priv->reg_page); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++/** ++ * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_utp_read_lpa(struct phy_device *phydev) ++{ ++ int lpa, lpagb; ++ ++ if (phydev->autoneg == AUTONEG_ENABLE) { ++ if (!phydev->autoneg_complete) { ++ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ++ 0); ++ mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0); ++ return 0; ++ } ++ ++ if (phydev->is_gigabit_capable) { ++ lpagb = __phy_read(phydev, MII_STAT1000); ++ if (lpagb < 0) ++ return lpagb; ++ ++ if (lpagb & LPA_1000MSFAIL) { ++ int adv = __phy_read(phydev, MII_CTRL1000); ++ ++ if (adv < 0) ++ return adv; ++ ++ if (adv & CTL1000_ENABLE_MASTER) ++ phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n"); ++ else ++ phydev_err(phydev, "Master/Slave resolution failed\n"); ++ return -ENOLINK; ++ } ++ ++ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ++ lpagb); ++ } ++ ++ lpa = __phy_read(phydev, MII_LPA); ++ if (lpa < 0) ++ return lpa; ++ ++ mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); ++ } else { ++ linkmode_zero(phydev->lp_advertising); ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8521_adjust_status() - update speed and duplex to phydev. when in fiber ++ * mode, adjust speed and duplex. ++ * @phydev: a pointer to a &struct phy_device ++ * @status: yt8521 status read from YTPHY_SPECIFIC_STATUS_REG ++ * @is_utp: false(yt8521 work in fiber mode) or true(yt8521 work in utp mode) ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 ++ */ ++static int yt8521_adjust_status(struct phy_device *phydev, int status, ++ bool is_utp) ++{ ++ int speed_mode, duplex; ++ int speed; ++ int err; ++ int lpa; ++ ++ if (is_utp) ++ duplex = (status & YTPHY_SSR_DUPLEX) >> YTPHY_SSR_DUPLEX_OFFSET; ++ else ++ duplex = DUPLEX_FULL; /* for fiber, it always DUPLEX_FULL */ ++ ++ speed_mode = (status & YTPHY_SSR_SPEED_MODE_MASK) >> ++ YTPHY_SSR_SPEED_MODE_OFFSET; ++ ++ switch (speed_mode) { ++ case YTPHY_SSR_SPEED_10M: ++ if (is_utp) ++ speed = SPEED_10; ++ else ++ /* for fiber, it will never run here, default to ++ * SPEED_UNKNOWN ++ */ ++ speed = SPEED_UNKNOWN; ++ break; ++ case YTPHY_SSR_SPEED_100M: ++ speed = SPEED_100; ++ break; ++ case YTPHY_SSR_SPEED_1000M: ++ speed = SPEED_1000; ++ break; ++ default: ++ speed = SPEED_UNKNOWN; ++ break; ++ } ++ ++ phydev->speed = speed; ++ phydev->duplex = duplex; ++ ++ if (is_utp) { ++ err = ytphy_utp_read_lpa(phydev); ++ if (err < 0) ++ return err; ++ ++ phy_resolve_aneg_pause(phydev); ++ } else { ++ lpa = __phy_read(phydev, MII_LPA); ++ if (lpa < 0) ++ return lpa; ++ ++ /* only support 1000baseX Full */ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, ++ phydev->lp_advertising, lpa & LPA_1000XFULL); ++ ++ if (!(lpa & YTPHY_FLPA_PAUSE)) { ++ phydev->pause = 0; ++ phydev->asym_pause = 0; ++ } else if ((lpa & YTPHY_FLPA_ASYM_PAUSE)) { ++ phydev->pause = 1; ++ phydev->asym_pause = 1; ++ } else { ++ phydev->pause = 1; ++ phydev->asym_pause = 0; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8521_read_status_paged() - determines the speed and duplex of one page ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to ++ * operate. ++ * ++ * returns 1 (utp or fiber link),0 (no link) or negative errno code ++ */ ++static int yt8521_read_status_paged(struct phy_device *phydev, int page) ++{ ++ int fiber_latch_val; ++ int fiber_curr_val; ++ int old_page; ++ int ret = 0; ++ int status; ++ int link; ++ ++ linkmode_zero(phydev->lp_advertising); ++ phydev->duplex = DUPLEX_UNKNOWN; ++ phydev->speed = SPEED_UNKNOWN; ++ phydev->asym_pause = 0; ++ phydev->pause = 0; ++ ++ /* YT8521 has two reg space (utp/fiber) for linkup with utp/fiber ++ * respectively. but for utp/fiber combo mode, reg space should be ++ * arbitrated based on media priority. by default, utp takes ++ * priority. reg space should be properly set before read ++ * YTPHY_SPECIFIC_STATUS_REG. ++ */ ++ ++ page &= YT8521_RSSR_SPACE_MASK; ++ old_page = phy_select_page(phydev, page); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ /* Read YTPHY_SPECIFIC_STATUS_REG, which indicates the speed and duplex ++ * of the PHY is actually using. ++ */ ++ ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ status = ret; ++ link = !!(status & YTPHY_SSR_LINK); ++ ++ /* When PHY is in fiber mode, speed transferred from 1000Mbps to ++ * 100Mbps,there is not link down from YTPHY_SPECIFIC_STATUS_REG, so ++ * we need check MII_BMSR to identify such case. ++ */ ++ if (page == YT8521_RSSR_FIBER_SPACE) { ++ ret = __phy_read(phydev, MII_BMSR); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ fiber_latch_val = ret; ++ ret = __phy_read(phydev, MII_BMSR); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ fiber_curr_val = ret; ++ if (link && fiber_latch_val != fiber_curr_val) { ++ link = 0; ++ phydev_info(phydev, ++ "%s, fiber link down detect, latch = %04x, curr = %04x\n", ++ __func__, fiber_latch_val, fiber_curr_val); ++ } ++ } else { ++ /* Read autonegotiation status */ ++ ret = __phy_read(phydev, MII_BMSR); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ phydev->autoneg_complete = ret & BMSR_ANEGCOMPLETE ? 1 : 0; ++ } ++ ++ if (link) { ++ if (page == YT8521_RSSR_UTP_SPACE) ++ yt8521_adjust_status(phydev, status, true); ++ else ++ yt8521_adjust_status(phydev, status, false); ++ } ++ return phy_restore_page(phydev, old_page, link); ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_read_status() - determines the negotiated speed and duplex ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_read_status(struct phy_device *phydev) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int link_fiber = 0; ++ int link_utp; ++ int link; ++ int ret; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ link = yt8521_read_status_paged(phydev, priv->reg_page); ++ if (link < 0) ++ return link; ++ } else { ++ /* when page is YT8521_RSSR_TO_BE_ARBITRATED, arbitration is ++ * needed. by default, utp is higher priority. ++ */ ++ ++ link_utp = yt8521_read_status_paged(phydev, ++ YT8521_RSSR_UTP_SPACE); ++ if (link_utp < 0) ++ return link_utp; ++ ++ if (!link_utp) { ++ link_fiber = yt8521_read_status_paged(phydev, ++ YT8521_RSSR_FIBER_SPACE); ++ if (link_fiber < 0) ++ return link_fiber; ++ } ++ ++ link = link_utp || link_fiber; ++ } ++ ++ if (link) { ++ if (phydev->link == 0) { ++ /* arbitrate reg space based on linkup media type. */ ++ if (priv->polling_mode == YT8521_MODE_POLL && ++ priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) { ++ if (link_fiber) ++ priv->reg_page = ++ YT8521_RSSR_FIBER_SPACE; ++ else ++ priv->reg_page = YT8521_RSSR_UTP_SPACE; ++ ++ ret = ytphy_write_ext_with_lock(phydev, ++ YT8521_REG_SPACE_SELECT_REG, ++ priv->reg_page); ++ if (ret < 0) ++ return ret; ++ ++ phydev->port = link_fiber ? PORT_FIBRE : PORT_TP; ++ ++ phydev_info(phydev, "%s, link up, media: %s\n", ++ __func__, ++ (phydev->port == PORT_TP) ? ++ "UTP" : "Fiber"); ++ } ++ } ++ phydev->link = 1; ++ } else { ++ if (phydev->link == 1) { ++ phydev_info(phydev, "%s, link down, media: %s\n", ++ __func__, (phydev->port == PORT_TP) ? ++ "UTP" : "Fiber"); ++ ++ /* When in YT8521_MODE_POLL mode, need prepare for next ++ * arbitration. ++ */ ++ if (priv->polling_mode == YT8521_MODE_POLL) { ++ priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED; ++ phydev->port = PORT_NONE; ++ } ++ } ++ ++ phydev->link = 0; ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8521_modify_bmcr_paged - bits modify a PHY's BMCR register of one page ++ * @phydev: the phy_device struct ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to operate ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * NOTE: Convenience function which allows a PHY's BMCR register to be ++ * modified as new register value = (old register value & ~mask) | set. ++ * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space ++ * has MII_BMCR. poll mode combines utp and faber,so need do both. ++ * If it is reset, it will wait for completion. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_modify_bmcr_paged(struct phy_device *phydev, int page, ++ u16 mask, u16 set) ++{ ++ int max_cnt = 500; /* the max wait time of reset ~ 500 ms */ ++ int old_page; ++ int ret = 0; ++ ++ old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ ret = __phy_modify(phydev, MII_BMCR, mask, set); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ /* If it is reset, need to wait for the reset to complete */ ++ if (set == BMCR_RESET) { ++ while (max_cnt--) { ++ usleep_range(1000, 1100); ++ ret = __phy_read(phydev, MII_BMCR); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ if (!(ret & BMCR_RESET)) ++ return phy_restore_page(phydev, old_page, 0); ++ } ++ } ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_modify_utp_fiber_bmcr - bits modify a PHY's BMCR register ++ * @phydev: the phy_device struct ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * NOTE: Convenience function which allows a PHY's BMCR register to be ++ * modified as new register value = (old register value & ~mask) | set. ++ * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space ++ * has MII_BMCR. poll mode combines utp and faber,so need do both. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_modify_utp_fiber_bmcr(struct phy_device *phydev, u16 mask, ++ u16 set) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int ret; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ ret = yt8521_modify_bmcr_paged(phydev, priv->reg_page, mask, ++ set); ++ if (ret < 0) ++ return ret; ++ } else { ++ ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_UTP_SPACE, ++ mask, set); ++ if (ret < 0) ++ return ret; ++ ++ ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_FIBER_SPACE, ++ mask, set); ++ if (ret < 0) ++ return ret; ++ } ++ return 0; ++} ++ ++/** ++ * yt8521_soft_reset() - called to issue a PHY software reset ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_soft_reset(struct phy_device *phydev) ++{ ++ return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_RESET); ++} ++ ++/** ++ * yt8521_suspend() - suspend the hardware ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_suspend(struct phy_device *phydev) ++{ ++ int wol_config; ++ ++ /* YTPHY_WOL_CONFIG_REG is common ext reg */ ++ wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); ++ if (wol_config < 0) ++ return wol_config; ++ ++ /* if wol enable, do nothing */ ++ if (wol_config & YTPHY_WCR_ENABLE) ++ return 0; ++ ++ return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_PDOWN); ++} ++ ++/** ++ * yt8521_resume() - resume the hardware ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_resume(struct phy_device *phydev) ++{ ++ int ret; ++ int wol_config; ++ ++ /* disable auto sleep */ ++ ret = ytphy_modify_ext_with_lock(phydev, ++ YT8521_EXTREG_SLEEP_CONTROL1_REG, ++ YT8521_ESC1R_SLEEP_SW, 0); ++ if (ret < 0) ++ return ret; ++ ++ wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); ++ if (wol_config < 0) ++ return wol_config; ++ ++ /* if wol enable, do nothing */ ++ if (wol_config & YTPHY_WCR_ENABLE) ++ return 0; ++ ++ return yt8521_modify_utp_fiber_bmcr(phydev, BMCR_PDOWN, 0); ++} ++ ++/** ++ * yt8521_config_init() - called to initialize the PHY ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_config_init(struct phy_device *phydev) ++{ ++ int old_page; ++ int ret = 0; ++ u16 val; ++ ++ old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ switch (phydev->interface) { ++ case PHY_INTERFACE_MODE_RGMII: ++ val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS; ++ val |= YT8521_RC1R_RX_DELAY_DIS; ++ break; ++ case PHY_INTERFACE_MODE_RGMII_RXID: ++ val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS; ++ val |= YT8521_RC1R_RX_DELAY_EN; ++ break; ++ case PHY_INTERFACE_MODE_RGMII_TXID: ++ val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN; ++ val |= YT8521_RC1R_RX_DELAY_DIS; ++ break; ++ case PHY_INTERFACE_MODE_RGMII_ID: ++ val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN; ++ val |= YT8521_RC1R_RX_DELAY_EN; ++ break; ++ case PHY_INTERFACE_MODE_SGMII: ++ break; ++ default: /* do not support other modes */ ++ ret = -EOPNOTSUPP; ++ goto err_restore_page; ++ } ++ ++ /* set rgmii delay mode */ ++ if (phydev->interface != PHY_INTERFACE_MODE_SGMII) { ++ ret = ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, ++ (YT8521_RC1R_RX_DELAY_MASK | ++ YT8521_RC1R_FE_TX_DELAY_MASK | ++ YT8521_RC1R_GE_TX_DELAY_MASK), ++ val); ++ if (ret < 0) ++ goto err_restore_page; ++ } ++ ++ /* disable auto sleep */ ++ ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, ++ YT8521_ESC1R_SLEEP_SW, 0); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ /* enable RXC clock when no wire plug */ ++ ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG, ++ YT8521_CGR_RX_CLK_EN, 0); ++ if (ret < 0) ++ goto err_restore_page; ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_prepare_fiber_features() - A small helper function that setup ++ * fiber's features. ++ * @phydev: a pointer to a &struct phy_device ++ * @dst: a pointer to store fiber's features ++ */ ++static void yt8521_prepare_fiber_features(struct phy_device *phydev, ++ unsigned long *dst) ++{ ++ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, dst); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, dst); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, dst); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, dst); ++} ++ ++/** ++ * yt8521_fiber_setup_forced - configures/forces speed from @phydev ++ * @phydev: target phy_device struct ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_fiber_setup_forced(struct phy_device *phydev) ++{ ++ u16 val; ++ int ret; ++ ++ if (phydev->speed == SPEED_1000) ++ val = YTPHY_MCR_FIBER_1000BX; ++ else if (phydev->speed == SPEED_100) ++ val = YTPHY_MCR_FIBER_100FX; ++ else ++ return -EINVAL; ++ ++ ret = __phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0); ++ if (ret < 0) ++ return ret; ++ ++ /* disable Fiber auto sensing */ ++ ret = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG, ++ YT8521_LTCR_EN_AUTOSEN, 0); ++ if (ret < 0) ++ return ret; ++ ++ ret = ytphy_modify_ext(phydev, YTPHY_MISC_CONFIG_REG, ++ YTPHY_MCR_FIBER_SPEED_MASK, val); ++ if (ret < 0) ++ return ret; ++ ++ return ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, ++ YT8521_CCR_SW_RST, 0); ++} ++ ++/** ++ * ytphy_check_and_restart_aneg - Enable and restart auto-negotiation ++ * @phydev: target phy_device struct ++ * @restart: whether aneg restart is requested ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_check_and_restart_aneg(struct phy_device *phydev, bool restart) ++{ ++ int ret; ++ ++ if (!restart) { ++ /* Advertisement hasn't changed, but maybe aneg was never on to ++ * begin with? Or maybe phy was isolated? ++ */ ++ ret = __phy_read(phydev, MII_BMCR); ++ if (ret < 0) ++ return ret; ++ ++ if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE)) ++ restart = true; ++ } ++ /* Enable and Restart Autonegotiation ++ * Don't isolate the PHY if we're negotiating ++ */ ++ if (restart) ++ return __phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, ++ BMCR_ANENABLE | BMCR_ANRESTART); ++ ++ return 0; ++} ++ ++/** ++ * yt8521_fiber_config_aneg - restart auto-negotiation or write ++ * YTPHY_MISC_CONFIG_REG. ++ * @phydev: target phy_device struct ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_fiber_config_aneg(struct phy_device *phydev) ++{ ++ int err, changed = 0; ++ int bmcr; ++ u16 adv; ++ ++ if (phydev->autoneg != AUTONEG_ENABLE) ++ return yt8521_fiber_setup_forced(phydev); ++ ++ /* enable Fiber auto sensing */ ++ err = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG, ++ 0, YT8521_LTCR_EN_AUTOSEN); ++ if (err < 0) ++ return err; ++ ++ err = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, ++ YT8521_CCR_SW_RST, 0); ++ if (err < 0) ++ return err; ++ ++ bmcr = __phy_read(phydev, MII_BMCR); ++ if (bmcr < 0) ++ return bmcr; ++ ++ /* When it is coming from fiber forced mode, add bmcr power down ++ * and power up to let aneg work fine. ++ */ ++ if (!(bmcr & BMCR_ANENABLE)) { ++ __phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN); ++ usleep_range(1000, 1100); ++ __phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0); ++ } ++ ++ adv = linkmode_adv_to_mii_adv_x(phydev->advertising, ++ ETHTOOL_LINK_MODE_1000baseX_Full_BIT); ++ ++ /* Setup fiber advertisement */ ++ err = __phy_modify_changed(phydev, MII_ADVERTISE, ++ ADVERTISE_1000XHALF | ADVERTISE_1000XFULL | ++ ADVERTISE_1000XPAUSE | ++ ADVERTISE_1000XPSE_ASYM, ++ adv); ++ if (err < 0) ++ return err; ++ ++ if (err > 0) ++ changed = 1; ++ ++ return ytphy_check_and_restart_aneg(phydev, changed); ++} ++ ++/** ++ * ytphy_setup_master_slave ++ * @phydev: target phy_device struct ++ * ++ * NOTE: The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_setup_master_slave(struct phy_device *phydev) ++{ ++ u16 ctl = 0; ++ ++ if (!phydev->is_gigabit_capable) ++ return 0; ++ ++ switch (phydev->master_slave_set) { ++ case MASTER_SLAVE_CFG_MASTER_PREFERRED: ++ ctl |= CTL1000_PREFER_MASTER; ++ break; ++ case MASTER_SLAVE_CFG_SLAVE_PREFERRED: ++ break; ++ case MASTER_SLAVE_CFG_MASTER_FORCE: ++ ctl |= CTL1000_AS_MASTER; ++ fallthrough; ++ case MASTER_SLAVE_CFG_SLAVE_FORCE: ++ ctl |= CTL1000_ENABLE_MASTER; ++ break; ++ case MASTER_SLAVE_CFG_UNKNOWN: ++ case MASTER_SLAVE_CFG_UNSUPPORTED: ++ return 0; ++ default: ++ phydev_warn(phydev, "Unsupported Master/Slave mode\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ return __phy_modify_changed(phydev, MII_CTRL1000, ++ (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER | ++ CTL1000_PREFER_MASTER), ctl); ++} ++ ++/** ++ * ytphy_utp_config_advert - sanitize and advertise auto-negotiation parameters ++ * @phydev: target phy_device struct ++ * ++ * NOTE: Writes MII_ADVERTISE with the appropriate values, ++ * after sanitizing the values to make sure we only advertise ++ * what is supported. Returns < 0 on error, 0 if the PHY's advertisement ++ * hasn't changed, and > 0 if it has changed. ++ * The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_utp_config_advert(struct phy_device *phydev) ++{ ++ int err, bmsr, changed = 0; ++ u32 adv; ++ ++ /* Only allow advertising what this PHY supports */ ++ linkmode_and(phydev->advertising, phydev->advertising, ++ phydev->supported); ++ ++ adv = linkmode_adv_to_mii_adv_t(phydev->advertising); ++ ++ /* Setup standard advertisement */ ++ err = __phy_modify_changed(phydev, MII_ADVERTISE, ++ ADVERTISE_ALL | ADVERTISE_100BASE4 | ++ ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, ++ adv); ++ if (err < 0) ++ return err; ++ if (err > 0) ++ changed = 1; ++ ++ bmsr = __phy_read(phydev, MII_BMSR); ++ if (bmsr < 0) ++ return bmsr; ++ ++ /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all ++ * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a ++ * logical 1. ++ */ ++ if (!(bmsr & BMSR_ESTATEN)) ++ return changed; ++ ++ adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); ++ ++ err = __phy_modify_changed(phydev, MII_CTRL1000, ++ ADVERTISE_1000FULL | ADVERTISE_1000HALF, ++ adv); ++ if (err < 0) ++ return err; ++ if (err > 0) ++ changed = 1; ++ ++ return changed; ++} ++ ++/** ++ * ytphy_utp_config_aneg - restart auto-negotiation or write BMCR ++ * @phydev: target phy_device struct ++ * @changed: whether autoneg is requested ++ * ++ * NOTE: If auto-negotiation is enabled, we configure the ++ * advertising, and then restart auto-negotiation. If it is not ++ * enabled, then we write the BMCR. ++ * The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_utp_config_aneg(struct phy_device *phydev, bool changed) ++{ ++ int err; ++ u16 ctl; ++ ++ err = ytphy_setup_master_slave(phydev); ++ if (err < 0) ++ return err; ++ else if (err) ++ changed = true; ++ ++ if (phydev->autoneg != AUTONEG_ENABLE) { ++ /* configures/forces speed/duplex from @phydev */ ++ ++ ctl = mii_bmcr_encode_fixed(phydev->speed, phydev->duplex); ++ ++ return __phy_modify(phydev, MII_BMCR, ~(BMCR_LOOPBACK | ++ BMCR_ISOLATE | BMCR_PDOWN), ctl); ++ } ++ ++ err = ytphy_utp_config_advert(phydev); ++ if (err < 0) /* error */ ++ return err; ++ else if (err) ++ changed = true; ++ ++ return ytphy_check_and_restart_aneg(phydev, changed); ++} ++ ++/** ++ * yt8521_config_aneg_paged() - switch reg space then call genphy_config_aneg ++ * of one page ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to ++ * operate. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_config_aneg_paged(struct phy_device *phydev, int page) ++{ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(fiber_supported); ++ struct yt8521_priv *priv = phydev->priv; ++ int old_page; ++ int ret = 0; ++ ++ page &= YT8521_RSSR_SPACE_MASK; ++ ++ old_page = phy_select_page(phydev, page); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED, ++ * phydev->advertising should be updated. ++ */ ++ if (priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) { ++ linkmode_zero(fiber_supported); ++ yt8521_prepare_fiber_features(phydev, fiber_supported); ++ ++ /* prepare fiber_supported, then setup advertising. */ ++ if (page == YT8521_RSSR_FIBER_SPACE) { ++ linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, ++ fiber_supported); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, ++ fiber_supported); ++ linkmode_and(phydev->advertising, ++ priv->combo_advertising, fiber_supported); ++ } else { ++ /* ETHTOOL_LINK_MODE_Autoneg_BIT is also used in utp */ ++ linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, ++ fiber_supported); ++ linkmode_andnot(phydev->advertising, ++ priv->combo_advertising, ++ fiber_supported); ++ } ++ } ++ ++ if (page == YT8521_RSSR_FIBER_SPACE) ++ ret = yt8521_fiber_config_aneg(phydev); ++ else ++ ret = ytphy_utp_config_aneg(phydev, false); ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_config_aneg() - change reg space then call yt8521_config_aneg_paged ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_config_aneg(struct phy_device *phydev) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int ret; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ ret = yt8521_config_aneg_paged(phydev, priv->reg_page); ++ if (ret < 0) ++ return ret; ++ } else { ++ /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED, ++ * phydev->advertising need to be saved at first run. ++ * Because it contains the advertising which supported by both ++ * mac and yt8521(utp and fiber). ++ */ ++ if (linkmode_empty(priv->combo_advertising)) { ++ linkmode_copy(priv->combo_advertising, ++ phydev->advertising); ++ } ++ ++ ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_UTP_SPACE); ++ if (ret < 0) ++ return ret; ++ ++ ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_FIBER_SPACE); ++ if (ret < 0) ++ return ret; ++ ++ /* we don't known which will be link, so restore ++ * phydev->advertising as default value. ++ */ ++ linkmode_copy(phydev->advertising, priv->combo_advertising); ++ } ++ return 0; ++} ++ ++/** ++ * yt8521_aneg_done_paged() - determines the auto negotiation result of one ++ * page. ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to ++ * operate. ++ * ++ * returns 0(no link)or 1(fiber or utp link) or negative errno code ++ */ ++static int yt8521_aneg_done_paged(struct phy_device *phydev, int page) ++{ ++ int old_page; ++ int ret = 0; ++ int link; ++ ++ old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ link = !!(ret & YTPHY_SSR_LINK); ++ ret = link; ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_aneg_done() - determines the auto negotiation result ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0(no link)or 1(fiber or utp link) or negative errno code ++ */ ++static int yt8521_aneg_done(struct phy_device *phydev) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int link_fiber = 0; ++ int link_utp; ++ int link; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ link = yt8521_aneg_done_paged(phydev, priv->reg_page); ++ } else { ++ link_utp = yt8521_aneg_done_paged(phydev, ++ YT8521_RSSR_UTP_SPACE); ++ if (link_utp < 0) ++ return link_utp; ++ ++ if (!link_utp) { ++ link_fiber = yt8521_aneg_done_paged(phydev, ++ YT8521_RSSR_FIBER_SPACE); ++ if (link_fiber < 0) ++ return link_fiber; ++ } ++ link = link_fiber || link_utp; ++ phydev_info(phydev, "%s, link_fiber: %d, link_utp: %d\n", ++ __func__, link_fiber, link_utp); ++ } ++ ++ return link; ++} ++ ++/** ++ * ytphy_utp_read_abilities - read PHY abilities from Clause 22 registers ++ * @phydev: target phy_device struct ++ * ++ * NOTE: Reads the PHY's abilities and populates ++ * phydev->supported accordingly. ++ * The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_utp_read_abilities(struct phy_device *phydev) ++{ ++ int val; ++ ++ linkmode_set_bit_array(phy_basic_ports_array, ++ ARRAY_SIZE(phy_basic_ports_array), ++ phydev->supported); ++ ++ val = __phy_read(phydev, MII_BMSR); ++ if (val < 0) ++ return val; ++ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported, ++ val & BMSR_ANEGCAPABLE); ++ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported, ++ val & BMSR_100FULL); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported, ++ val & BMSR_100HALF); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported, ++ val & BMSR_10FULL); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported, ++ val & BMSR_10HALF); ++ ++ if (val & BMSR_ESTATEN) { ++ val = __phy_read(phydev, MII_ESTATUS); ++ if (val < 0) ++ return val; ++ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, ++ phydev->supported, val & ESTATUS_1000_TFULL); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, ++ phydev->supported, val & ESTATUS_1000_THALF); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, ++ phydev->supported, val & ESTATUS_1000_XFULL); ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8521_get_features_paged() - read supported link modes for one page ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to ++ * operate. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_get_features_paged(struct phy_device *phydev, int page) ++{ ++ int old_page; ++ int ret = 0; ++ ++ page &= YT8521_RSSR_SPACE_MASK; ++ old_page = phy_select_page(phydev, page); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ if (page == YT8521_RSSR_FIBER_SPACE) { ++ linkmode_zero(phydev->supported); ++ yt8521_prepare_fiber_features(phydev, phydev->supported); ++ } else { ++ ret = ytphy_utp_read_abilities(phydev); ++ if (ret < 0) ++ goto err_restore_page; ++ } ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_get_features - switch reg space then call yt8521_get_features_paged ++ * @phydev: target phy_device struct ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_get_features(struct phy_device *phydev) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int ret; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ ret = yt8521_get_features_paged(phydev, priv->reg_page); ++ } else { ++ ret = yt8521_get_features_paged(phydev, ++ YT8521_RSSR_UTP_SPACE); ++ if (ret < 0) ++ return ret; ++ ++ /* add fiber's features to phydev->supported */ ++ yt8521_prepare_fiber_features(phydev, phydev->supported); ++ } ++ return ret; ++} ++ + static struct phy_driver motorcomm_phy_drvs[] = { + { + PHY_ID_MATCH_EXACT(PHY_ID_YT8511), +@@ -121,16 +1733,35 @@ static struct phy_driver motorcomm_phy_d + .read_page = yt8511_read_page, + .write_page = yt8511_write_page, + }, ++ { ++ PHY_ID_MATCH_EXACT(PHY_ID_YT8521), ++ .name = "YT8521 Gigabit Ethernet", ++ .get_features = yt8521_get_features, ++ .probe = yt8521_probe, ++ .read_page = yt8521_read_page, ++ .write_page = yt8521_write_page, ++ .get_wol = ytphy_get_wol, ++ .set_wol = ytphy_set_wol, ++ .config_aneg = yt8521_config_aneg, ++ .aneg_done = yt8521_aneg_done, ++ .config_init = yt8521_config_init, ++ .read_status = yt8521_read_status, ++ .soft_reset = yt8521_soft_reset, ++ .suspend = yt8521_suspend, ++ .resume = yt8521_resume, ++ }, + }; + + module_phy_driver(motorcomm_phy_drvs); + +-MODULE_DESCRIPTION("Motorcomm PHY driver"); ++MODULE_DESCRIPTION("Motorcomm 8511/8521 PHY driver"); + MODULE_AUTHOR("Peter Geis"); ++MODULE_AUTHOR("Frank"); + MODULE_LICENSE("GPL"); + + static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { + { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, ++ { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, + { /* sentinal */ } + }; + diff --git a/target/linux/generic/backport-5.15/791-v6.2-02-net-phy-fix-yt8521-duplicated-argument-to-or.patch b/target/linux/generic/backport-5.15/791-v6.2-02-net-phy-fix-yt8521-duplicated-argument-to-or.patch new file mode 100644 index 0000000000..cce71c8d84 --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.2-02-net-phy-fix-yt8521-duplicated-argument-to-or.patch @@ -0,0 +1,49 @@ +From 4e0243e7128c9b25ea2739136076a95d6adaba5e Mon Sep 17 00:00:00 2001 +From: Frank +Date: Fri, 4 Nov 2022 16:44:41 +0800 +Subject: [PATCH] net: phy: fix yt8521 duplicated argument to & or | + +cocci warnings: (new ones prefixed by >>) +>> drivers/net/phy/motorcomm.c:1122:8-35: duplicated argument to & or | + drivers/net/phy/motorcomm.c:1126:8-35: duplicated argument to & or | + drivers/net/phy/motorcomm.c:1130:8-34: duplicated argument to & or | + drivers/net/phy/motorcomm.c:1134:8-34: duplicated argument to & or | + + The second YT8521_RC1R_GE_TX_DELAY_xx should be YT8521_RC1R_FE_TX_DELAY_xx. + +Fixes: 70479a40954c ("net: phy: Add driver for Motorcomm yt8521 gigabit ethernet phy") +Reported-by: kernel test robot +Reported-by: Julia Lawall +Signed-off-by: Frank +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/motorcomm.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -1119,19 +1119,19 @@ static int yt8521_config_init(struct phy + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: +- val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS; ++ val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS; + val |= YT8521_RC1R_RX_DELAY_DIS; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: +- val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS; ++ val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS; + val |= YT8521_RC1R_RX_DELAY_EN; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: +- val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN; ++ val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN; + val |= YT8521_RC1R_RX_DELAY_DIS; + break; + case PHY_INTERFACE_MODE_RGMII_ID: +- val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN; ++ val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN; + val |= YT8521_RC1R_RX_DELAY_EN; + break; + case PHY_INTERFACE_MODE_SGMII: diff --git a/target/linux/generic/backport-5.15/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch b/target/linux/generic/backport-5.15/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch new file mode 100644 index 0000000000..da60c63905 --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch @@ -0,0 +1,140 @@ +From 813abcd98fb1b2cccf850cdfa092a4bfc50b2363 Mon Sep 17 00:00:00 2001 +From: Frank +Date: Tue, 22 Nov 2022 16:42:32 +0800 +Subject: [PATCH] net: phy: add Motorcomm YT8531S phy id. + +We added patch for motorcomm.c to support YT8531S. This patch has +been tested on AM335x platform which has one YT8531S interface +card and passed all test cases. +The tested cases indluding: YT8531S UTP function with support of +10M/100M/1000M; YT8531S Fiber function with support of 100M/1000M; +and YT8531S Combo function that supports auto detection of media type. + +Since most functions of YT8531S are similar to YT8521 and we reuse some +codes for YT8521 in the patch file. + +Signed-off-by: Frank +Signed-off-by: David S. Miller +--- + drivers/net/phy/Kconfig | 2 +- + drivers/net/phy/motorcomm.c | 52 +++++++++++++++++++++++++++++++++---- + 2 files changed, 48 insertions(+), 6 deletions(-) + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -245,7 +245,7 @@ config MOTORCOMM_PHY + tristate "Motorcomm PHYs" + help + Enables support for Motorcomm network PHYs. +- Currently supports the YT8511, YT8521 Gigabit Ethernet PHYs. ++ Currently supports the YT8511, YT8521, YT8531S Gigabit Ethernet PHYs. + + config NATIONAL_PHY + tristate "National Semiconductor PHYs" +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -1,6 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0+ + /* +- * Motorcomm 8511/8521 PHY driver. ++ * Motorcomm 8511/8521/8531S PHY driver. + * + * Author: Peter Geis + * Author: Frank +@@ -12,9 +12,10 @@ + #include + + #define PHY_ID_YT8511 0x0000010a +-#define PHY_ID_YT8521 0x0000011A ++#define PHY_ID_YT8521 0x0000011A ++#define PHY_ID_YT8531S 0x4F51E91A + +-/* YT8521 Register Overview ++/* YT8521/YT8531S Register Overview + * UTP Register space | FIBER Register space + * ------------------------------------------------------------ + * | UTP MII | FIBER MII | +@@ -147,7 +148,7 @@ + #define YT8521_LINK_TIMER_CFG2_REG 0xA5 + #define YT8521_LTCR_EN_AUTOSEN BIT(15) + +-/* 0xA000, 0xA001, 0xA003 ,and 0xA006 ~ 0xA00A are common ext registers ++/* 0xA000, 0xA001, 0xA003, 0xA006 ~ 0xA00A and 0xA012 are common ext registers + * of yt8521 phy. There is no need to switch reg space when operating these + * registers. + */ +@@ -221,6 +222,9 @@ + */ + #define YTPHY_WCR_TYPE_PULSE BIT(0) + ++#define YT8531S_SYNCE_CFG_REG 0xA012 ++#define YT8531S_SCR_SYNCE_ENABLE BIT(6) ++ + /* Extended Register end */ + + struct yt8521_priv { +@@ -648,6 +652,26 @@ static int yt8521_probe(struct phy_devic + } + + /** ++ * yt8531s_probe() - read chip config then set suitable polling_mode ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8531s_probe(struct phy_device *phydev) ++{ ++ int ret; ++ ++ /* Disable SyncE clock output by default */ ++ ret = ytphy_modify_ext_with_lock(phydev, YT8531S_SYNCE_CFG_REG, ++ YT8531S_SCR_SYNCE_ENABLE, 0); ++ if (ret < 0) ++ return ret; ++ ++ /* same as yt8521_probe */ ++ return yt8521_probe(phydev); ++} ++ ++/** + * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp + * @phydev: a pointer to a &struct phy_device + * +@@ -1750,11 +1774,28 @@ static struct phy_driver motorcomm_phy_d + .suspend = yt8521_suspend, + .resume = yt8521_resume, + }, ++ { ++ PHY_ID_MATCH_EXACT(PHY_ID_YT8531S), ++ .name = "YT8531S Gigabit Ethernet", ++ .get_features = yt8521_get_features, ++ .probe = yt8531s_probe, ++ .read_page = yt8521_read_page, ++ .write_page = yt8521_write_page, ++ .get_wol = ytphy_get_wol, ++ .set_wol = ytphy_set_wol, ++ .config_aneg = yt8521_config_aneg, ++ .aneg_done = yt8521_aneg_done, ++ .config_init = yt8521_config_init, ++ .read_status = yt8521_read_status, ++ .soft_reset = yt8521_soft_reset, ++ .suspend = yt8521_suspend, ++ .resume = yt8521_resume, ++ }, + }; + + module_phy_driver(motorcomm_phy_drvs); + +-MODULE_DESCRIPTION("Motorcomm 8511/8521 PHY driver"); ++MODULE_DESCRIPTION("Motorcomm 8511/8521/8531S PHY driver"); + MODULE_AUTHOR("Peter Geis"); + MODULE_AUTHOR("Frank"); + MODULE_LICENSE("GPL"); +@@ -1762,6 +1803,7 @@ MODULE_LICENSE("GPL"); + static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { + { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, ++ { PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) }, + { /* sentinal */ } + }; + diff --git a/target/linux/generic/backport-5.15/791-v6.3-04-net-phy-fix-the-spelling-problem-of-Sentinel.patch b/target/linux/generic/backport-5.15/791-v6.3-04-net-phy-fix-the-spelling-problem-of-Sentinel.patch new file mode 100644 index 0000000000..94fc32aadb --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.3-04-net-phy-fix-the-spelling-problem-of-Sentinel.patch @@ -0,0 +1,26 @@ +From 4104a713204d62aca482eebb0c6226d82a0721eb Mon Sep 17 00:00:00 2001 +From: Frank Sae +Date: Sat, 28 Jan 2023 14:35:57 +0800 +Subject: [PATCH] net: phy: fix the spelling problem of Sentinel + +CHECK: 'sentinal' may be misspelled - perhaps 'sentinel'? + +Signed-off-by: Frank Sae +Reviewed-by: Andrew Lunn +Link: https://lore.kernel.org/r/20230128063558.5850-1-Frank.Sae@motor-comm.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/motorcomm.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -1804,7 +1804,7 @@ static const struct mdio_device_id __may + { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) }, +- { /* sentinal */ } ++ { /* sentinel */ } + }; + + MODULE_DEVICE_TABLE(mdio, motorcomm_tbl); diff --git a/target/linux/generic/backport-5.15/791-v6.3-05-net-phy-motorcomm-change-the-phy-id-of-yt8521-and-yt8531s.patch b/target/linux/generic/backport-5.15/791-v6.3-05-net-phy-motorcomm-change-the-phy-id-of-yt8521-and-yt8531s.patch new file mode 100644 index 0000000000..076fa82d26 --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.3-05-net-phy-motorcomm-change-the-phy-id-of-yt8521-and-yt8531s.patch @@ -0,0 +1,29 @@ +From 3c1dc22162d673d595855d24f95200ed2643f88f Mon Sep 17 00:00:00 2001 +From: Frank Sae +Date: Sat, 28 Jan 2023 14:35:58 +0800 +Subject: [PATCH] net: phy: motorcomm: change the phy id of yt8521 and yt8531s + to lowercase + +The phy id is usually defined in lower case. + +Signed-off-by: Frank Sae +Reviewed-by: Andrew Lunn +Link: https://lore.kernel.org/r/20230128063558.5850-2-Frank.Sae@motor-comm.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/motorcomm.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -12,8 +12,8 @@ + #include + + #define PHY_ID_YT8511 0x0000010a +-#define PHY_ID_YT8521 0x0000011A +-#define PHY_ID_YT8531S 0x4F51E91A ++#define PHY_ID_YT8521 0x0000011a ++#define PHY_ID_YT8531S 0x4f51e91a + + /* YT8521/YT8531S Register Overview + * UTP Register space | FIBER Register space diff --git a/target/linux/generic/backport-5.15/791-v6.3-06-net-phy-Add-BIT-macro-for-Motorcomm-yt8521-yt8531-gigabit.patch b/target/linux/generic/backport-5.15/791-v6.3-06-net-phy-Add-BIT-macro-for-Motorcomm-yt8521-yt8531-gigabit.patch new file mode 100644 index 0000000000..ba9a6ab4cc --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.3-06-net-phy-Add-BIT-macro-for-Motorcomm-yt8521-yt8531-gigabit.patch @@ -0,0 +1,107 @@ +From 4869a146cd60fc8115230f0a45e15e534c531922 Mon Sep 17 00:00:00 2001 +From: Frank Sae +Date: Thu, 2 Feb 2023 11:00:34 +0800 +Subject: [PATCH] net: phy: Add BIT macro for Motorcomm yt8521/yt8531 gigabit + ethernet phy + +Add BIT macro for Motorcomm yt8521/yt8531 gigabit ethernet phy. + This is a preparatory patch. Add BIT macro for 0xA012 reg, and + supplement for 0xA001 and 0xA003 reg. These will be used to support dts. + +Signed-off-by: Frank Sae +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/motorcomm.c | 55 ++++++++++++++++++++++++++++++++++--- + 1 file changed, 51 insertions(+), 4 deletions(-) + +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -161,6 +161,11 @@ + + #define YT8521_CHIP_CONFIG_REG 0xA001 + #define YT8521_CCR_SW_RST BIT(15) ++/* 1b0 disable 1.9ns rxc clock delay *default* ++ * 1b1 enable 1.9ns rxc clock delay ++ */ ++#define YT8521_CCR_RXC_DLY_EN BIT(8) ++#define YT8521_CCR_RXC_DLY_1_900_NS 1900 + + #define YT8521_CCR_MODE_SEL_MASK (BIT(2) | BIT(1) | BIT(0)) + #define YT8521_CCR_MODE_UTP_TO_RGMII 0 +@@ -178,22 +183,41 @@ + #define YT8521_MODE_POLL 0x3 + + #define YT8521_RGMII_CONFIG1_REG 0xA003 +- ++/* 1b0 use original tx_clk_rgmii *default* ++ * 1b1 use inverted tx_clk_rgmii. ++ */ ++#define YT8521_RC1R_TX_CLK_SEL_INVERTED BIT(14) + /* TX Gig-E Delay is bits 3:0, default 0x1 + * TX Fast-E Delay is bits 7:4, default 0xf + * RX Delay is bits 13:10, default 0x0 + * Delay = 150ps * N + * On = 2250ps, off = 0ps + */ +-#define YT8521_RC1R_RX_DELAY_MASK (0xF << 10) ++#define YT8521_RC1R_RX_DELAY_MASK GENMASK(13, 10) + #define YT8521_RC1R_RX_DELAY_EN (0xF << 10) + #define YT8521_RC1R_RX_DELAY_DIS (0x0 << 10) +-#define YT8521_RC1R_FE_TX_DELAY_MASK (0xF << 4) ++#define YT8521_RC1R_FE_TX_DELAY_MASK GENMASK(7, 4) + #define YT8521_RC1R_FE_TX_DELAY_EN (0xF << 4) + #define YT8521_RC1R_FE_TX_DELAY_DIS (0x0 << 4) +-#define YT8521_RC1R_GE_TX_DELAY_MASK (0xF << 0) ++#define YT8521_RC1R_GE_TX_DELAY_MASK GENMASK(3, 0) + #define YT8521_RC1R_GE_TX_DELAY_EN (0xF << 0) + #define YT8521_RC1R_GE_TX_DELAY_DIS (0x0 << 0) ++#define YT8521_RC1R_RGMII_0_000_NS 0 ++#define YT8521_RC1R_RGMII_0_150_NS 1 ++#define YT8521_RC1R_RGMII_0_300_NS 2 ++#define YT8521_RC1R_RGMII_0_450_NS 3 ++#define YT8521_RC1R_RGMII_0_600_NS 4 ++#define YT8521_RC1R_RGMII_0_750_NS 5 ++#define YT8521_RC1R_RGMII_0_900_NS 6 ++#define YT8521_RC1R_RGMII_1_050_NS 7 ++#define YT8521_RC1R_RGMII_1_200_NS 8 ++#define YT8521_RC1R_RGMII_1_350_NS 9 ++#define YT8521_RC1R_RGMII_1_500_NS 10 ++#define YT8521_RC1R_RGMII_1_650_NS 11 ++#define YT8521_RC1R_RGMII_1_800_NS 12 ++#define YT8521_RC1R_RGMII_1_950_NS 13 ++#define YT8521_RC1R_RGMII_2_100_NS 14 ++#define YT8521_RC1R_RGMII_2_250_NS 15 + + #define YTPHY_MISC_CONFIG_REG 0xA006 + #define YTPHY_MCR_FIBER_SPEED_MASK BIT(0) +@@ -222,6 +246,29 @@ + */ + #define YTPHY_WCR_TYPE_PULSE BIT(0) + ++#define YTPHY_SYNCE_CFG_REG 0xA012 ++#define YT8521_SCR_SYNCE_ENABLE BIT(5) ++/* 1b0 output 25m clock ++ * 1b1 output 125m clock *default* ++ */ ++#define YT8521_SCR_CLK_FRE_SEL_125M BIT(3) ++#define YT8521_SCR_CLK_SRC_MASK GENMASK(2, 1) ++#define YT8521_SCR_CLK_SRC_PLL_125M 0 ++#define YT8521_SCR_CLK_SRC_UTP_RX 1 ++#define YT8521_SCR_CLK_SRC_SDS_RX 2 ++#define YT8521_SCR_CLK_SRC_REF_25M 3 ++#define YT8531_SCR_SYNCE_ENABLE BIT(6) ++/* 1b0 output 25m clock *default* ++ * 1b1 output 125m clock ++ */ ++#define YT8531_SCR_CLK_FRE_SEL_125M BIT(4) ++#define YT8531_SCR_CLK_SRC_MASK GENMASK(3, 1) ++#define YT8531_SCR_CLK_SRC_PLL_125M 0 ++#define YT8531_SCR_CLK_SRC_UTP_RX 1 ++#define YT8531_SCR_CLK_SRC_SDS_RX 2 ++#define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL 3 ++#define YT8531_SCR_CLK_SRC_REF_25M 4 ++#define YT8531_SCR_CLK_SRC_SSC_25M 5 + #define YT8531S_SYNCE_CFG_REG 0xA012 + #define YT8531S_SCR_SYNCE_ENABLE BIT(6) + diff --git a/target/linux/generic/backport-5.15/791-v6.3-07-net-phy-Add-dts-support-for-Motorcomm-yt8521-gigabit.patch b/target/linux/generic/backport-5.15/791-v6.3-07-net-phy-Add-dts-support-for-Motorcomm-yt8521-gigabit.patch new file mode 100644 index 0000000000..6d89fae84c --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.3-07-net-phy-Add-dts-support-for-Motorcomm-yt8521-gigabit.patch @@ -0,0 +1,343 @@ +From a6e68f0f8769f79c67cdcfb6302feecd36197dec Mon Sep 17 00:00:00 2001 +From: Frank Sae +Date: Thu, 2 Feb 2023 11:00:35 +0800 +Subject: [PATCH] net: phy: Add dts support for Motorcomm yt8521 gigabit + ethernet phy + +Add dts support for Motorcomm yt8521 gigabit ethernet phy. + Add ytphy_rgmii_clk_delay_config function to support dst config for + the delay of rgmii clk. This funciont is common for yt8521, yt8531s + and yt8531. + This patch has been verified on AM335x platform. + +Signed-off-by: Frank Sae +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/motorcomm.c | 253 ++++++++++++++++++++++++++++-------- + 1 file changed, 199 insertions(+), 54 deletions(-) + +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -10,6 +10,7 @@ + #include + #include + #include ++#include + + #define PHY_ID_YT8511 0x0000010a + #define PHY_ID_YT8521 0x0000011a +@@ -187,21 +188,9 @@ + * 1b1 use inverted tx_clk_rgmii. + */ + #define YT8521_RC1R_TX_CLK_SEL_INVERTED BIT(14) +-/* TX Gig-E Delay is bits 3:0, default 0x1 +- * TX Fast-E Delay is bits 7:4, default 0xf +- * RX Delay is bits 13:10, default 0x0 +- * Delay = 150ps * N +- * On = 2250ps, off = 0ps +- */ + #define YT8521_RC1R_RX_DELAY_MASK GENMASK(13, 10) +-#define YT8521_RC1R_RX_DELAY_EN (0xF << 10) +-#define YT8521_RC1R_RX_DELAY_DIS (0x0 << 10) + #define YT8521_RC1R_FE_TX_DELAY_MASK GENMASK(7, 4) +-#define YT8521_RC1R_FE_TX_DELAY_EN (0xF << 4) +-#define YT8521_RC1R_FE_TX_DELAY_DIS (0x0 << 4) + #define YT8521_RC1R_GE_TX_DELAY_MASK GENMASK(3, 0) +-#define YT8521_RC1R_GE_TX_DELAY_EN (0xF << 0) +-#define YT8521_RC1R_GE_TX_DELAY_DIS (0x0 << 0) + #define YT8521_RC1R_RGMII_0_000_NS 0 + #define YT8521_RC1R_RGMII_0_150_NS 1 + #define YT8521_RC1R_RGMII_0_300_NS 2 +@@ -274,6 +263,10 @@ + + /* Extended Register end */ + ++#define YTPHY_DTS_OUTPUT_CLK_DIS 0 ++#define YTPHY_DTS_OUTPUT_CLK_25M 25000000 ++#define YTPHY_DTS_OUTPUT_CLK_125M 125000000 ++ + struct yt8521_priv { + /* combo_advertising is used for case of YT8521 in combo mode, + * this means that yt8521 may work in utp or fiber mode which depends +@@ -641,6 +634,142 @@ static int yt8521_write_page(struct phy_ + }; + + /** ++ * struct ytphy_cfg_reg_map - map a config value to a register value ++ * @cfg: value in device configuration ++ * @reg: value in the register ++ */ ++struct ytphy_cfg_reg_map { ++ u32 cfg; ++ u32 reg; ++}; ++ ++static const struct ytphy_cfg_reg_map ytphy_rgmii_delays[] = { ++ /* for tx delay / rx delay with YT8521_CCR_RXC_DLY_EN is not set. */ ++ { 0, YT8521_RC1R_RGMII_0_000_NS }, ++ { 150, YT8521_RC1R_RGMII_0_150_NS }, ++ { 300, YT8521_RC1R_RGMII_0_300_NS }, ++ { 450, YT8521_RC1R_RGMII_0_450_NS }, ++ { 600, YT8521_RC1R_RGMII_0_600_NS }, ++ { 750, YT8521_RC1R_RGMII_0_750_NS }, ++ { 900, YT8521_RC1R_RGMII_0_900_NS }, ++ { 1050, YT8521_RC1R_RGMII_1_050_NS }, ++ { 1200, YT8521_RC1R_RGMII_1_200_NS }, ++ { 1350, YT8521_RC1R_RGMII_1_350_NS }, ++ { 1500, YT8521_RC1R_RGMII_1_500_NS }, ++ { 1650, YT8521_RC1R_RGMII_1_650_NS }, ++ { 1800, YT8521_RC1R_RGMII_1_800_NS }, ++ { 1950, YT8521_RC1R_RGMII_1_950_NS }, /* default tx/rx delay */ ++ { 2100, YT8521_RC1R_RGMII_2_100_NS }, ++ { 2250, YT8521_RC1R_RGMII_2_250_NS }, ++ ++ /* only for rx delay with YT8521_CCR_RXC_DLY_EN is set. */ ++ { 0 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_000_NS }, ++ { 150 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_150_NS }, ++ { 300 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_300_NS }, ++ { 450 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_450_NS }, ++ { 600 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_600_NS }, ++ { 750 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_750_NS }, ++ { 900 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_900_NS }, ++ { 1050 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_050_NS }, ++ { 1200 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_200_NS }, ++ { 1350 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_350_NS }, ++ { 1500 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_500_NS }, ++ { 1650 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_650_NS }, ++ { 1800 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_800_NS }, ++ { 1950 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_950_NS }, ++ { 2100 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_100_NS }, ++ { 2250 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_250_NS } ++}; ++ ++static u32 ytphy_get_delay_reg_value(struct phy_device *phydev, ++ const char *prop_name, ++ const struct ytphy_cfg_reg_map *tbl, ++ int tb_size, ++ u16 *rxc_dly_en, ++ u32 dflt) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ int tb_size_half = tb_size / 2; ++ u32 val; ++ int i; ++ ++ if (of_property_read_u32(node, prop_name, &val)) ++ goto err_dts_val; ++ ++ /* when rxc_dly_en is NULL, it is get the delay for tx, only half of ++ * tb_size is valid. ++ */ ++ if (!rxc_dly_en) ++ tb_size = tb_size_half; ++ ++ for (i = 0; i < tb_size; i++) { ++ if (tbl[i].cfg == val) { ++ if (rxc_dly_en && i < tb_size_half) ++ *rxc_dly_en = 0; ++ return tbl[i].reg; ++ } ++ } ++ ++ phydev_warn(phydev, "Unsupported value %d for %s using default (%u)\n", ++ val, prop_name, dflt); ++ ++err_dts_val: ++ /* when rxc_dly_en is not NULL, it is get the delay for rx. ++ * The rx default in dts and ytphy_rgmii_clk_delay_config is 1950 ps, ++ * so YT8521_CCR_RXC_DLY_EN should not be set. ++ */ ++ if (rxc_dly_en) ++ *rxc_dly_en = 0; ++ ++ return dflt; ++} ++ ++static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev) ++{ ++ int tb_size = ARRAY_SIZE(ytphy_rgmii_delays); ++ u16 rxc_dly_en = YT8521_CCR_RXC_DLY_EN; ++ u32 rx_reg, tx_reg; ++ u16 mask, val = 0; ++ int ret; ++ ++ rx_reg = ytphy_get_delay_reg_value(phydev, "rx-internal-delay-ps", ++ ytphy_rgmii_delays, tb_size, ++ &rxc_dly_en, ++ YT8521_RC1R_RGMII_1_950_NS); ++ tx_reg = ytphy_get_delay_reg_value(phydev, "tx-internal-delay-ps", ++ ytphy_rgmii_delays, tb_size, NULL, ++ YT8521_RC1R_RGMII_1_950_NS); ++ ++ switch (phydev->interface) { ++ case PHY_INTERFACE_MODE_RGMII: ++ rxc_dly_en = 0; ++ break; ++ case PHY_INTERFACE_MODE_RGMII_RXID: ++ val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg); ++ break; ++ case PHY_INTERFACE_MODE_RGMII_TXID: ++ rxc_dly_en = 0; ++ val |= FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg); ++ break; ++ case PHY_INTERFACE_MODE_RGMII_ID: ++ val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg) | ++ FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg); ++ break; ++ default: /* do not support other modes */ ++ return -EOPNOTSUPP; ++ } ++ ++ ret = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, ++ YT8521_CCR_RXC_DLY_EN, rxc_dly_en); ++ if (ret < 0) ++ return ret; ++ ++ /* Generally, it is not necessary to adjust YT8521_RC1R_FE_TX_DELAY */ ++ mask = YT8521_RC1R_RX_DELAY_MASK | YT8521_RC1R_GE_TX_DELAY_MASK; ++ return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val); ++} ++ ++/** + * yt8521_probe() - read chip config then set suitable polling_mode + * @phydev: a pointer to a &struct phy_device + * +@@ -648,9 +777,12 @@ static int yt8521_write_page(struct phy_ + */ + static int yt8521_probe(struct phy_device *phydev) + { ++ struct device_node *node = phydev->mdio.dev.of_node; + struct device *dev = &phydev->mdio.dev; + struct yt8521_priv *priv; + int chip_config; ++ u16 mask, val; ++ u32 freq; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); +@@ -695,7 +827,45 @@ static int yt8521_probe(struct phy_devic + return ret; + } + +- return 0; ++ if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq)) ++ freq = YTPHY_DTS_OUTPUT_CLK_DIS; ++ ++ if (phydev->drv->phy_id == PHY_ID_YT8521) { ++ switch (freq) { ++ case YTPHY_DTS_OUTPUT_CLK_DIS: ++ mask = YT8521_SCR_SYNCE_ENABLE; ++ val = 0; ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_25M: ++ mask = YT8521_SCR_SYNCE_ENABLE | ++ YT8521_SCR_CLK_SRC_MASK | ++ YT8521_SCR_CLK_FRE_SEL_125M; ++ val = YT8521_SCR_SYNCE_ENABLE | ++ FIELD_PREP(YT8521_SCR_CLK_SRC_MASK, ++ YT8521_SCR_CLK_SRC_REF_25M); ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_125M: ++ mask = YT8521_SCR_SYNCE_ENABLE | ++ YT8521_SCR_CLK_SRC_MASK | ++ YT8521_SCR_CLK_FRE_SEL_125M; ++ val = YT8521_SCR_SYNCE_ENABLE | ++ YT8521_SCR_CLK_FRE_SEL_125M | ++ FIELD_PREP(YT8521_SCR_CLK_SRC_MASK, ++ YT8521_SCR_CLK_SRC_PLL_125M); ++ break; ++ default: ++ phydev_warn(phydev, "Freq err:%u\n", freq); ++ return -EINVAL; ++ } ++ } else if (phydev->drv->phy_id == PHY_ID_YT8531S) { ++ return 0; ++ } else { ++ phydev_warn(phydev, "PHY id err\n"); ++ return -EINVAL; ++ } ++ ++ return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask, ++ val); + } + + /** +@@ -1180,61 +1350,36 @@ static int yt8521_resume(struct phy_devi + */ + static int yt8521_config_init(struct phy_device *phydev) + { ++ struct device_node *node = phydev->mdio.dev.of_node; + int old_page; + int ret = 0; +- u16 val; + + old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); + if (old_page < 0) + goto err_restore_page; + +- switch (phydev->interface) { +- case PHY_INTERFACE_MODE_RGMII: +- val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS; +- val |= YT8521_RC1R_RX_DELAY_DIS; +- break; +- case PHY_INTERFACE_MODE_RGMII_RXID: +- val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS; +- val |= YT8521_RC1R_RX_DELAY_EN; +- break; +- case PHY_INTERFACE_MODE_RGMII_TXID: +- val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN; +- val |= YT8521_RC1R_RX_DELAY_DIS; +- break; +- case PHY_INTERFACE_MODE_RGMII_ID: +- val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN; +- val |= YT8521_RC1R_RX_DELAY_EN; +- break; +- case PHY_INTERFACE_MODE_SGMII: +- break; +- default: /* do not support other modes */ +- ret = -EOPNOTSUPP; +- goto err_restore_page; +- } +- + /* set rgmii delay mode */ + if (phydev->interface != PHY_INTERFACE_MODE_SGMII) { +- ret = ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, +- (YT8521_RC1R_RX_DELAY_MASK | +- YT8521_RC1R_FE_TX_DELAY_MASK | +- YT8521_RC1R_GE_TX_DELAY_MASK), +- val); ++ ret = ytphy_rgmii_clk_delay_config(phydev); + if (ret < 0) + goto err_restore_page; + } + +- /* disable auto sleep */ +- ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, +- YT8521_ESC1R_SLEEP_SW, 0); +- if (ret < 0) +- goto err_restore_page; +- +- /* enable RXC clock when no wire plug */ +- ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG, +- YT8521_CGR_RX_CLK_EN, 0); +- if (ret < 0) +- goto err_restore_page; ++ if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) { ++ /* disable auto sleep */ ++ ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, ++ YT8521_ESC1R_SLEEP_SW, 0); ++ if (ret < 0) ++ goto err_restore_page; ++ } + ++ if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) { ++ /* enable RXC clock when no wire plug */ ++ ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG, ++ YT8521_CGR_RX_CLK_EN, 0); ++ if (ret < 0) ++ goto err_restore_page; ++ } + err_restore_page: + return phy_restore_page(phydev, old_page, ret); + } diff --git a/target/linux/generic/backport-5.15/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch b/target/linux/generic/backport-5.15/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch new file mode 100644 index 0000000000..86fc04695c --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch @@ -0,0 +1,100 @@ +From 36152f87dda4af221b16258751451d9cd3d0fb0b Mon Sep 17 00:00:00 2001 +From: Frank Sae +Date: Thu, 2 Feb 2023 11:00:36 +0800 +Subject: [PATCH] net: phy: Add dts support for Motorcomm yt8531s gigabit + ethernet phy + +Add dts support for Motorcomm yt8531s gigabit ethernet phy. + Change yt8521_probe to support clk config of yt8531s. Becase + yt8521_probe does the things which yt8531s is needed, so + removed yt8531s function. + This patch has been verified on AM335x platform with yt8531s board. + +Signed-off-by: Frank Sae +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/motorcomm.c | 51 ++++++++++++++++++++----------------- + 1 file changed, 27 insertions(+), 24 deletions(-) + +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -258,8 +258,6 @@ + #define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL 3 + #define YT8531_SCR_CLK_SRC_REF_25M 4 + #define YT8531_SCR_CLK_SRC_SSC_25M 5 +-#define YT8531S_SYNCE_CFG_REG 0xA012 +-#define YT8531S_SCR_SYNCE_ENABLE BIT(6) + + /* Extended Register end */ + +@@ -858,7 +856,32 @@ static int yt8521_probe(struct phy_devic + return -EINVAL; + } + } else if (phydev->drv->phy_id == PHY_ID_YT8531S) { +- return 0; ++ switch (freq) { ++ case YTPHY_DTS_OUTPUT_CLK_DIS: ++ mask = YT8531_SCR_SYNCE_ENABLE; ++ val = 0; ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_25M: ++ mask = YT8531_SCR_SYNCE_ENABLE | ++ YT8531_SCR_CLK_SRC_MASK | ++ YT8531_SCR_CLK_FRE_SEL_125M; ++ val = YT8531_SCR_SYNCE_ENABLE | ++ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, ++ YT8531_SCR_CLK_SRC_REF_25M); ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_125M: ++ mask = YT8531_SCR_SYNCE_ENABLE | ++ YT8531_SCR_CLK_SRC_MASK | ++ YT8531_SCR_CLK_FRE_SEL_125M; ++ val = YT8531_SCR_SYNCE_ENABLE | ++ YT8531_SCR_CLK_FRE_SEL_125M | ++ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, ++ YT8531_SCR_CLK_SRC_PLL_125M); ++ break; ++ default: ++ phydev_warn(phydev, "Freq err:%u\n", freq); ++ return -EINVAL; ++ } + } else { + phydev_warn(phydev, "PHY id err\n"); + return -EINVAL; +@@ -869,26 +892,6 @@ static int yt8521_probe(struct phy_devic + } + + /** +- * yt8531s_probe() - read chip config then set suitable polling_mode +- * @phydev: a pointer to a &struct phy_device +- * +- * returns 0 or negative errno code +- */ +-static int yt8531s_probe(struct phy_device *phydev) +-{ +- int ret; +- +- /* Disable SyncE clock output by default */ +- ret = ytphy_modify_ext_with_lock(phydev, YT8531S_SYNCE_CFG_REG, +- YT8531S_SCR_SYNCE_ENABLE, 0); +- if (ret < 0) +- return ret; +- +- /* same as yt8521_probe */ +- return yt8521_probe(phydev); +-} +- +-/** + * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp + * @phydev: a pointer to a &struct phy_device + * +@@ -1970,7 +1973,7 @@ static struct phy_driver motorcomm_phy_d + PHY_ID_MATCH_EXACT(PHY_ID_YT8531S), + .name = "YT8531S Gigabit Ethernet", + .get_features = yt8521_get_features, +- .probe = yt8531s_probe, ++ .probe = yt8521_probe, + .read_page = yt8521_read_page, + .write_page = yt8521_write_page, + .get_wol = ytphy_get_wol, diff --git a/target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch b/target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch new file mode 100644 index 0000000000..9dce5a8add --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch @@ -0,0 +1,302 @@ +From 4ac94f728a588e7096dd5010cd7141a309ea7805 Mon Sep 17 00:00:00 2001 +From: Frank Sae +Date: Thu, 2 Feb 2023 11:00:37 +0800 +Subject: [PATCH] net: phy: Add driver for Motorcomm yt8531 gigabit ethernet + phy + +Add a driver for the motorcomm yt8531 gigabit ethernet phy. We have + verified the driver on AM335x platform with yt8531 board. On the + board, yt8531 gigabit ethernet phy works in utp mode, RGMII + interface, supports 1000M/100M/10M speeds, and wol(magic package). + +Signed-off-by: Frank Sae +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/Kconfig | 2 +- + drivers/net/phy/motorcomm.c | 208 +++++++++++++++++++++++++++++++++++- + 2 files changed, 207 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -245,7 +245,7 @@ config MOTORCOMM_PHY + tristate "Motorcomm PHYs" + help + Enables support for Motorcomm network PHYs. +- Currently supports the YT8511, YT8521, YT8531S Gigabit Ethernet PHYs. ++ Currently supports YT85xx Gigabit Ethernet PHYs. + + config NATIONAL_PHY + tristate "National Semiconductor PHYs" +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -1,6 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0+ + /* +- * Motorcomm 8511/8521/8531S PHY driver. ++ * Motorcomm 8511/8521/8531/8531S PHY driver. + * + * Author: Peter Geis + * Author: Frank +@@ -14,6 +14,7 @@ + + #define PHY_ID_YT8511 0x0000010a + #define PHY_ID_YT8521 0x0000011a ++#define PHY_ID_YT8531 0x4f51e91b + #define PHY_ID_YT8531S 0x4f51e91a + + /* YT8521/YT8531S Register Overview +@@ -517,6 +518,61 @@ err_restore_page: + return phy_restore_page(phydev, old_page, ret); + } + ++static int yt8531_set_wol(struct phy_device *phydev, ++ struct ethtool_wolinfo *wol) ++{ ++ const u16 mac_addr_reg[] = { ++ YTPHY_WOL_MACADDR2_REG, ++ YTPHY_WOL_MACADDR1_REG, ++ YTPHY_WOL_MACADDR0_REG, ++ }; ++ const u8 *mac_addr; ++ u16 mask, val; ++ int ret; ++ u8 i; ++ ++ if (wol->wolopts & WAKE_MAGIC) { ++ mac_addr = phydev->attached_dev->dev_addr; ++ ++ /* Store the device address for the magic packet */ ++ for (i = 0; i < 3; i++) { ++ ret = ytphy_write_ext_with_lock(phydev, mac_addr_reg[i], ++ ((mac_addr[i * 2] << 8)) | ++ (mac_addr[i * 2 + 1])); ++ if (ret < 0) ++ return ret; ++ } ++ ++ /* Enable WOL feature */ ++ mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL; ++ val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ++ val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS; ++ ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG, ++ mask, val); ++ if (ret < 0) ++ return ret; ++ ++ /* Enable WOL interrupt */ ++ ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0, ++ YTPHY_IER_WOL); ++ if (ret < 0) ++ return ret; ++ } else { ++ /* Disable WOL feature */ ++ mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ++ ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG, ++ mask, 0); ++ ++ /* Disable WOL interrupt */ ++ ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, ++ YTPHY_IER_WOL, 0); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return 0; ++} ++ + static int yt8511_read_page(struct phy_device *phydev) + { + return __phy_read(phydev, YT8511_PAGE_SELECT); +@@ -767,6 +823,17 @@ static int ytphy_rgmii_clk_delay_config( + return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val); + } + ++static int ytphy_rgmii_clk_delay_config_with_lock(struct phy_device *phydev) ++{ ++ int ret; ++ ++ phy_lock_mdio_bus(phydev); ++ ret = ytphy_rgmii_clk_delay_config(phydev); ++ phy_unlock_mdio_bus(phydev); ++ ++ return ret; ++} ++ + /** + * yt8521_probe() - read chip config then set suitable polling_mode + * @phydev: a pointer to a &struct phy_device +@@ -891,6 +958,43 @@ static int yt8521_probe(struct phy_devic + val); + } + ++static int yt8531_probe(struct phy_device *phydev) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ u16 mask, val; ++ u32 freq; ++ ++ if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq)) ++ freq = YTPHY_DTS_OUTPUT_CLK_DIS; ++ ++ switch (freq) { ++ case YTPHY_DTS_OUTPUT_CLK_DIS: ++ mask = YT8531_SCR_SYNCE_ENABLE; ++ val = 0; ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_25M: ++ mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | ++ YT8531_SCR_CLK_FRE_SEL_125M; ++ val = YT8531_SCR_SYNCE_ENABLE | ++ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, ++ YT8531_SCR_CLK_SRC_REF_25M); ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_125M: ++ mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | ++ YT8531_SCR_CLK_FRE_SEL_125M; ++ val = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_FRE_SEL_125M | ++ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, ++ YT8531_SCR_CLK_SRC_PLL_125M); ++ break; ++ default: ++ phydev_warn(phydev, "Freq err:%u\n", freq); ++ return -EINVAL; ++ } ++ ++ return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask, ++ val); ++} ++ + /** + * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp + * @phydev: a pointer to a &struct phy_device +@@ -1387,6 +1491,94 @@ err_restore_page: + return phy_restore_page(phydev, old_page, ret); + } + ++static int yt8531_config_init(struct phy_device *phydev) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ int ret; ++ ++ ret = ytphy_rgmii_clk_delay_config_with_lock(phydev); ++ if (ret < 0) ++ return ret; ++ ++ if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) { ++ /* disable auto sleep */ ++ ret = ytphy_modify_ext_with_lock(phydev, ++ YT8521_EXTREG_SLEEP_CONTROL1_REG, ++ YT8521_ESC1R_SLEEP_SW, 0); ++ if (ret < 0) ++ return ret; ++ } ++ ++ if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) { ++ /* enable RXC clock when no wire plug */ ++ ret = ytphy_modify_ext_with_lock(phydev, ++ YT8521_CLOCK_GATING_REG, ++ YT8521_CGR_RX_CLK_EN, 0); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8531_link_change_notify() - Adjust the tx clock direction according to ++ * the current speed and dts config. ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * NOTE: This function is only used to adapt to VF2 with JH7110 SoC. Please ++ * keep "motorcomm,tx-clk-adj-enabled" not exist in dts when the soc is not ++ * JH7110. ++ */ ++static void yt8531_link_change_notify(struct phy_device *phydev) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ bool tx_clk_adj_enabled = false; ++ bool tx_clk_1000_inverted; ++ bool tx_clk_100_inverted; ++ bool tx_clk_10_inverted; ++ u16 val = 0; ++ int ret; ++ ++ if (of_property_read_bool(node, "motorcomm,tx-clk-adj-enabled")) ++ tx_clk_adj_enabled = true; ++ ++ if (!tx_clk_adj_enabled) ++ return; ++ ++ if (of_property_read_bool(node, "motorcomm,tx-clk-10-inverted")) ++ tx_clk_10_inverted = true; ++ if (of_property_read_bool(node, "motorcomm,tx-clk-100-inverted")) ++ tx_clk_100_inverted = true; ++ if (of_property_read_bool(node, "motorcomm,tx-clk-1000-inverted")) ++ tx_clk_1000_inverted = true; ++ ++ if (phydev->speed < 0) ++ return; ++ ++ switch (phydev->speed) { ++ case SPEED_1000: ++ if (tx_clk_1000_inverted) ++ val = YT8521_RC1R_TX_CLK_SEL_INVERTED; ++ break; ++ case SPEED_100: ++ if (tx_clk_100_inverted) ++ val = YT8521_RC1R_TX_CLK_SEL_INVERTED; ++ break; ++ case SPEED_10: ++ if (tx_clk_10_inverted) ++ val = YT8521_RC1R_TX_CLK_SEL_INVERTED; ++ break; ++ default: ++ return; ++ } ++ ++ ret = ytphy_modify_ext_with_lock(phydev, YT8521_RGMII_CONFIG1_REG, ++ YT8521_RC1R_TX_CLK_SEL_INVERTED, val); ++ if (ret < 0) ++ phydev_warn(phydev, "Modify TX_CLK_SEL err:%d\n", ret); ++} ++ + /** + * yt8521_prepare_fiber_features() - A small helper function that setup + * fiber's features. +@@ -1970,6 +2162,17 @@ static struct phy_driver motorcomm_phy_d + .resume = yt8521_resume, + }, + { ++ PHY_ID_MATCH_EXACT(PHY_ID_YT8531), ++ .name = "YT8531 Gigabit Ethernet", ++ .probe = yt8531_probe, ++ .config_init = yt8531_config_init, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, ++ .get_wol = ytphy_get_wol, ++ .set_wol = yt8531_set_wol, ++ .link_change_notify = yt8531_link_change_notify, ++ }, ++ { + PHY_ID_MATCH_EXACT(PHY_ID_YT8531S), + .name = "YT8531S Gigabit Ethernet", + .get_features = yt8521_get_features, +@@ -1990,7 +2193,7 @@ static struct phy_driver motorcomm_phy_d + + module_phy_driver(motorcomm_phy_drvs); + +-MODULE_DESCRIPTION("Motorcomm 8511/8521/8531S PHY driver"); ++MODULE_DESCRIPTION("Motorcomm 8511/8521/8531/8531S PHY driver"); + MODULE_AUTHOR("Peter Geis"); + MODULE_AUTHOR("Frank"); + MODULE_LICENSE("GPL"); +@@ -1998,6 +2201,7 @@ MODULE_LICENSE("GPL"); + static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { + { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, ++ { PHY_ID_MATCH_EXACT(PHY_ID_YT8531) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) }, + { /* sentinel */ } + }; diff --git a/target/linux/generic/backport-5.15/791-v6.3-10-net-phy-motorcomm-uninitialized-variables-in.patch b/target/linux/generic/backport-5.15/791-v6.3-10-net-phy-motorcomm-uninitialized-variables-in.patch new file mode 100644 index 0000000000..29ae86dbbc --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.3-10-net-phy-motorcomm-uninitialized-variables-in.patch @@ -0,0 +1,34 @@ +From 9753613f7399601f9bae6ee81e9d4274246c98ab Mon Sep 17 00:00:00 2001 +From: Dan Carpenter +Date: Wed, 15 Feb 2023 07:21:47 +0300 +Subject: [PATCH] net: phy: motorcomm: uninitialized variables in + yt8531_link_change_notify() + +These booleans are never set to false, but are just used without being +initialized. + +Fixes: 4ac94f728a58 ("net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy") +Signed-off-by: Dan Carpenter +Reviewed-by: Frank Sae +Link: https://lore.kernel.org/r/Y+xd2yJet2ImHLoQ@kili +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/motorcomm.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -1533,10 +1533,10 @@ static int yt8531_config_init(struct phy + static void yt8531_link_change_notify(struct phy_device *phydev) + { + struct device_node *node = phydev->mdio.dev.of_node; ++ bool tx_clk_1000_inverted = false; ++ bool tx_clk_100_inverted = false; ++ bool tx_clk_10_inverted = false; + bool tx_clk_adj_enabled = false; +- bool tx_clk_1000_inverted; +- bool tx_clk_100_inverted; +- bool tx_clk_10_inverted; + u16 val = 0; + int ret; + diff --git a/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch b/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch index 95929b7fe3..2a9dc74947 100644 --- a/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch +++ b/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch @@ -19,7 +19,7 @@ Signed-off-by: Greg Kroah-Hartman --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -17961,6 +17961,11 @@ L: netdev@vger.kernel.org +@@ -17962,6 +17962,11 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/dlink/sundance.c diff --git a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch b/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch index df66df794c..e562dd8396 100644 --- a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch +++ b/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch @@ -32,7 +32,7 @@ Signed-off-by: Guenter Roeck --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -15898,6 +15898,13 @@ S: Maintained +@@ -15899,6 +15899,13 @@ S: Maintained F: include/sound/rt*.h F: sound/soc/codecs/rt* diff --git a/target/linux/rockchip/armv8/config-5.15 b/target/linux/rockchip/armv8/config-5.15 index 87715789c7..2359fd8729 100644 --- a/target/linux/rockchip/armv8/config-5.15 +++ b/target/linux/rockchip/armv8/config-5.15 @@ -350,6 +350,7 @@ CONFIG_MMC_SDHCI_OF_DWCMSHC=y # CONFIG_MMC_SDHCI_PCI is not set CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_MOTORCOMM_PHY=y CONFIG_MQ_IOSCHED_DEADLINE=y # CONFIG_MTD_CFI is not set CONFIG_MTD_CMDLINE_PARTS=y