From: FUKAUMI Naoki Date: Sun, 28 Jul 2024 23:38:25 +0000 (+0900) Subject: rockchip: add support for Radxa ROCK Pi E v3.0 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=649bc715b2e8cce32e3cfad5057ccc70ee944937;p=openwrt%2Fstaging%2Fthess.git rockchip: add support for Radxa ROCK Pi E v3.0 Radxa ROCK Pi E v3.0 is a compact networking SBC[1] using the Rockchip RK3328 SoC. Hardware -------- - Rockchip RK3328 SoC - Quad A53 CPU - 512MB/1GB/2GB DDR4 RAM - 4/8/16/32GB eMMC - Micro SD Card slot - WiFi 4 and BT 4, or WiFi 5 and BT 5 (not supported yet) - 1x 1000M Ethernet with PoE support (additional PoE HAT required) - 1x 100M Ethernet - 1x USB 3.0 Type-A port (Host) - 1x 4-ring 3.5mm headphone jack - 40 Pin GPIO header [1] https://radxa.com/products/rockpi/pie Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki Link: https://github.com/openwrt/openwrt/pull/15984 Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile index cf650cb82a..307fcff5f7 100644 --- a/package/boot/uboot-rockchip/Makefile +++ b/package/boot/uboot-rockchip/Makefile @@ -106,6 +106,13 @@ define U-Boot/rock-pi-e-rk3328 radxa_rock-pi-e endef +define U-Boot/rock-pi-e-v3-rk3328 + $(U-Boot/rk3328/Default) + NAME:=ROCK Pi E v3.0 + BUILD_DEVICES:= \ + radxa_rock-pi-e-v3 +endef + # RK3399 boards define U-Boot/rk3399/Default @@ -220,6 +227,7 @@ UBOOT_TARGETS := \ roc-cc-rk3328 \ rock64-rk3328 \ rock-pi-e-rk3328 \ + rock-pi-e-v3-rk3328 \ radxa-cm3-io-rk3566 \ bpi-r2-pro-rk3568 \ nanopi-r5c-rk3568 \ diff --git a/package/boot/uboot-rockchip/patches/000-rockchip-add-support-for-Radxa-ROCK-Pi-E-v3.0.patch b/package/boot/uboot-rockchip/patches/000-rockchip-add-support-for-Radxa-ROCK-Pi-E-v3.0.patch new file mode 100644 index 0000000000..515e07c3f8 --- /dev/null +++ b/package/boot/uboot-rockchip/patches/000-rockchip-add-support-for-Radxa-ROCK-Pi-E-v3.0.patch @@ -0,0 +1,248 @@ +From 8ca5e0e4d6ed084d2321584e8cdc8105c60b9aa1 Mon Sep 17 00:00:00 2001 +From: FUKAUMI Naoki +Date: Tue, 25 Jun 2024 05:45:29 +0900 +Subject: [PATCH] rockchip: add support for Radxa ROCK Pi E v3.0 + +ROCK Pi E v3.0 uses DDR4 SDRAM instead of DDR3 SDRAM used in v1.2x. + +prepare new rk3328-rock-pi-e-v3.dts in u-boot which just includes +upstream rk3328-rock-pi-e.dts. + +defconfig still uses + CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock-pi-e.dtb" + +because v3.0 and prior are compatible. + +Suggested-by: Jonas Karlman +Signed-off-by: FUKAUMI Naoki +Reviewed-by: Kever Yang +--- + ...dtsi => rk3328-rock-pi-e-base-u-boot.dtsi} | 1 - + arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi | 47 +-------- + arch/arm/dts/rk3328-rock-pi-e-v3-u-boot.dtsi | 4 + + arch/arm/dts/rk3328-rock-pi-e-v3.dts | 4 + + board/rockchip/evb_rk3328/MAINTAINERS | 4 +- + configs/rock-pi-e-v3-rk3328_defconfig | 97 +++++++++++++++++++ + 6 files changed, 111 insertions(+), 46 deletions(-) + copy arch/arm/dts/{rk3328-rock-pi-e-u-boot.dtsi => rk3328-rock-pi-e-base-u-boot.dtsi} (94%) + rewrite arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi (88%) + create mode 100644 arch/arm/dts/rk3328-rock-pi-e-v3-u-boot.dtsi + create mode 100644 arch/arm/dts/rk3328-rock-pi-e-v3.dts + create mode 100644 configs/rock-pi-e-v3-rk3328_defconfig + +--- a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi ++++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi +@@ -1,43 +1,4 @@ + // SPDX-License-Identifier: GPL-2.0+ +-/* +- * (C) Copyright 2020 Radxa +- */ + +-#include "rk3328-u-boot.dtsi" ++#include "rk3328-rock-pi-e-base-u-boot.dtsi" + #include "rk3328-sdram-ddr3-666.dtsi" +- +-/ { +- smbios { +- compatible = "u-boot,sysinfo-smbios"; +- +- smbios { +- system { +- manufacturer = "radxa"; +- product = "rock-pi-e_rk3328"; +- }; +- +- baseboard { +- manufacturer = "radxa"; +- product = "rock-pi-e_rk3328"; +- }; +- +- chassis { +- manufacturer = "radxa"; +- product = "rock-pi-e_rk3328"; +- }; +- }; +- }; +-}; +- +-&u2phy_host { +- phy-supply = <&vcc_host_5v>; +-}; +- +-&vcc_host_5v { +- /delete-property/ regulator-always-on; +- /delete-property/ regulator-boot-on; +-}; +- +-&vcc_sd { +- bootph-pre-ram; +-}; +--- /dev/null ++++ b/arch/arm/dts/rk3328-rock-pi-e-base-u-boot.dtsi +@@ -0,0 +1,42 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * (C) Copyright 2020 Radxa ++ */ ++ ++#include "rk3328-u-boot.dtsi" ++ ++/ { ++ smbios { ++ compatible = "u-boot,sysinfo-smbios"; ++ ++ smbios { ++ system { ++ manufacturer = "radxa"; ++ product = "rock-pi-e_rk3328"; ++ }; ++ ++ baseboard { ++ manufacturer = "radxa"; ++ product = "rock-pi-e_rk3328"; ++ }; ++ ++ chassis { ++ manufacturer = "radxa"; ++ product = "rock-pi-e_rk3328"; ++ }; ++ }; ++ }; ++}; ++ ++&u2phy_host { ++ phy-supply = <&vcc_host_5v>; ++}; ++ ++&vcc_host_5v { ++ /delete-property/ regulator-always-on; ++ /delete-property/ regulator-boot-on; ++}; ++ ++&vcc_sd { ++ bootph-pre-ram; ++}; +--- /dev/null ++++ b/arch/arm/dts/rk3328-rock-pi-e-v3-u-boot.dtsi +@@ -0,0 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++ ++#include "rk3328-rock-pi-e-base-u-boot.dtsi" ++#include "rk3328-sdram-ddr4-666.dtsi" +--- /dev/null ++++ b/arch/arm/dts/rk3328-rock-pi-e-v3.dts +@@ -0,0 +1,4 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++/dts-v1/; ++#include "rk3328-rock-pi-e.dts" +--- a/board/rockchip/evb_rk3328/MAINTAINERS ++++ b/board/rockchip/evb_rk3328/MAINTAINERS +@@ -64,5 +64,5 @@ M: Banglang Huang + S: Maintained + F: configs/rock-pi-e-rk3328_defconfig +-F: arch/arm/dts/rk3328-rock-pi-e.dts +-F: arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi ++F: configs/rock-pi-e-v3-rk3328_defconfig ++F: arch/arm/dts/rk3328-rock-pi-e* +--- /dev/null ++++ b/configs/rock-pi-e-v3-rk3328_defconfig +@@ -0,0 +1,97 @@ ++CONFIG_ARM=y ++CONFIG_SKIP_LOWLEVEL_INIT=y ++CONFIG_COUNTER_FREQUENCY=24000000 ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_SPL_GPIO=y ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_SF_DEFAULT_SPEED=20000000 ++CONFIG_ENV_OFFSET=0x3F8000 ++CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock-pi-e-v3" ++CONFIG_DM_RESET=y ++CONFIG_ROCKCHIP_RK3328=y ++CONFIG_DEBUG_UART_BASE=0xFF130000 ++CONFIG_DEBUG_UART_CLOCK=24000000 ++CONFIG_SYS_LOAD_ADDR=0x800800 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_SPL_FIT_SIGNATURE=y ++CONFIG_SPL_LOAD_FIT=y ++CONFIG_LEGACY_IMAGE_FORMAT=y ++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock-pi-e.dtb" ++# CONFIG_DISPLAY_CPUINFO is not set ++CONFIG_DISPLAY_BOARDINFO_LATE=y ++CONFIG_SPL_MAX_SIZE=0x40000 ++CONFIG_SPL_PAD_TO=0x7f8000 ++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set ++CONFIG_SPL_POWER=y ++CONFIG_SPL_ATF=y ++CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y ++CONFIG_CMD_BOOTZ=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_TIME=y ++CONFIG_CMD_REGULATOR=y ++CONFIG_SPL_OF_CONTROL=y ++CONFIG_TPL_OF_CONTROL=y ++# CONFIG_OF_UPSTREAM is not set ++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" ++CONFIG_TPL_OF_PLATDATA=y ++CONFIG_ENV_IS_IN_MMC=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_SYS_MMC_ENV_DEV=1 ++CONFIG_TPL_DM=y ++CONFIG_SPL_DM_SEQ_ALIAS=y ++CONFIG_REGMAP=y ++CONFIG_SPL_REGMAP=y ++CONFIG_TPL_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_SPL_SYSCON=y ++CONFIG_TPL_SYSCON=y ++CONFIG_CLK=y ++CONFIG_SPL_CLK=y ++CONFIG_ROCKCHIP_GPIO=y ++CONFIG_SYS_I2C_ROCKCHIP=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_PHY_REALTEK=y ++CONFIG_DM_MDIO=y ++CONFIG_DM_ETH_PHY=y ++CONFIG_PHY_GIGE=y ++CONFIG_ETH_DESIGNWARE=y ++CONFIG_GMAC_ROCKCHIP=y ++CONFIG_PHY_ROCKCHIP_INNO_USB2=y ++CONFIG_PINCTRL=y ++CONFIG_SPL_PINCTRL=y ++CONFIG_DM_PMIC=y ++CONFIG_PMIC_RK8XX=y ++CONFIG_SPL_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_SPL_DM_REGULATOR_FIXED=y ++CONFIG_REGULATOR_RK8XX=y ++CONFIG_PWM_ROCKCHIP=y ++CONFIG_RAM=y ++CONFIG_SPL_RAM=y ++CONFIG_TPL_RAM=y ++CONFIG_DM_RNG=y ++CONFIG_RNG_ROCKCHIP=y ++CONFIG_BAUDRATE=1500000 ++CONFIG_DEBUG_UART_SHIFT=2 ++CONFIG_SYS_NS16550_MEM32=y ++CONFIG_SYSINFO=y ++CONFIG_SYSINFO_SMBIOS=y ++CONFIG_SYSRESET=y ++# CONFIG_TPL_SYSRESET is not set ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_GENERIC=y ++CONFIG_USB_OHCI_HCD=y ++CONFIG_USB_OHCI_GENERIC=y ++CONFIG_USB_DWC3=y ++CONFIG_USB_DWC3_GENERIC=y ++CONFIG_SPL_TINY_MEMSET=y ++CONFIG_TPL_TINY_MEMSET=y ++CONFIG_ERRNO_STR=y diff --git a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network index 8729bd52f2..f1192c9371 100644 --- a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network +++ b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network @@ -12,6 +12,7 @@ rockchip_setup_interfaces() friendlyarm,nanopi-r2s|\ friendlyarm,nanopi-r4s|\ friendlyarm,nanopi-r4s-enterprise|\ + radxa,rockpi-e|\ xunlong,orangepi-r1-plus|\ xunlong,orangepi-r1-plus-lts) ucidef_set_interfaces_lan_wan 'eth1' 'eth0' diff --git a/target/linux/rockchip/image/armv8.mk b/target/linux/rockchip/image/armv8.mk index 23519b43ee..ff66cba939 100644 --- a/target/linux/rockchip/image/armv8.mk +++ b/target/linux/rockchip/image/armv8.mk @@ -139,6 +139,15 @@ define Device/radxa_rock-pi-e endef TARGET_DEVICES += radxa_rock-pi-e +define Device/radxa_rock-pi-e-v3 + DEVICE_VENDOR := Radxa + DEVICE_MODEL := ROCK Pi E v3.0 + SOC := rk3328 + DEVICE_DTS := rockchip/rk3328-rock-pi-e + DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis +endef +TARGET_DEVICES += radxa_rock-pi-e-v3 + define Device/radxa_rock-pi-s DEVICE_VENDOR := Radxa DEVICE_MODEL := ROCK Pi S diff --git a/target/linux/rockchip/patches-6.6/114-rock-pi-e-add-led-aliases-and-stop-heartbeat.patch b/target/linux/rockchip/patches-6.6/114-rock-pi-e-add-led-aliases-and-stop-heartbeat.patch new file mode 100644 index 0000000000..e2ea7fdd63 --- /dev/null +++ b/target/linux/rockchip/patches-6.6/114-rock-pi-e-add-led-aliases-and-stop-heartbeat.patch @@ -0,0 +1,27 @@ +--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts +@@ -23,6 +23,10 @@ + aliases { + mmc0 = &sdmmc; + mmc1 = &emmc; ++ led-boot = &led_blue; ++ led-failsafe = &led_blue; ++ led-running = &led_blue; ++ led-upgrade = &led_blue; + }; + + chosen { +@@ -55,10 +59,11 @@ + pinctrl-0 = <&led_pin>; + pinctrl-names = "default"; + +- led-0 { ++ led_blue: led-0 { + color = ; ++ default-state = "on"; ++ function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "heartbeat"; + }; + }; +