From: Sean Young Date: Mon, 13 Aug 2012 11:59:45 +0000 (-0300) Subject: [media] iguanair: fix receiver overflow X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=640583836b9488c806349e3839c9d8b0f15da1fa;p=openwrt%2Fstaging%2Fblogic.git [media] iguanair: fix receiver overflow The Pioneer CU-700 remote causes receiver overflows if you hold down any button. The remote does not send NEC IR repeats, it repeats the entire NEC code after 20ms. The iguanair hardware advertises an interval of 10 which just not enough; with 100 URBs per second and at most 7 edges per URB, we handle at most 700 edges per second. The remote generates about 900. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/rc/iguanair.c b/drivers/media/rc/iguanair.c index 9810008b41d4..6a09c2e53753 100644 --- a/drivers/media/rc/iguanair.c +++ b/drivers/media/rc/iguanair.c @@ -484,9 +484,8 @@ static int __devinit iguanair_probe(struct usb_interface *intf, init_completion(&ir->completion); pipein = usb_rcvintpipe(udev, idesc->endpoint[0].desc.bEndpointAddress); - usb_fill_int_urb(ir->urb_in, udev, pipein, ir->buf_in, - MAX_PACKET_SIZE, iguanair_rx, ir, - idesc->endpoint[0].desc.bInterval); + usb_fill_int_urb(ir->urb_in, udev, pipein, ir->buf_in, MAX_PACKET_SIZE, + iguanair_rx, ir, 1); ir->urb_in->transfer_dma = ir->dma_in; ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;