From: Daniel Golle Date: Fri, 21 Oct 2022 17:59:37 +0000 (+0100) Subject: oxnas: switch to Linux 5.15 and drop Linux 5.10 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=63ff5b783d227bcdfb8db4500b84a3acf68b0f4c;p=openwrt%2Fstaging%2Fdangole.git oxnas: switch to Linux 5.15 and drop Linux 5.10 Signed-off-by: Daniel Golle --- diff --git a/target/linux/oxnas/Makefile b/target/linux/oxnas/Makefile index 9dfdb5c86e..2884a66cc7 100644 --- a/target/linux/oxnas/Makefile +++ b/target/linux/oxnas/Makefile @@ -7,8 +7,7 @@ SUBTARGETS:=ox810se ox820 FEATURES:=gpio ramdisk rtc squashfs DEVICE_TYPE:=nas -KERNEL_PATCHVER:=5.10 -KERNEL_TESTING_PATCHVER:=5.15 +KERNEL_PATCHVER:=5.15 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/oxnas/config-5.10 b/target/linux/oxnas/config-5.10 deleted file mode 100644 index dd1706cb13..0000000000 --- a/target/linux/oxnas/config-5.10 +++ /dev/null @@ -1,357 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_BINFMT_FLAT=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_HAS_KEEPINITRD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_CPU_AUTO=y -# CONFIG_ARCH_MULTI_V4 is not set -# CONFIG_ARCH_MULTI_V4T is not set -CONFIG_ARCH_MULTI_V4_V5=y -CONFIG_ARCH_MULTI_V5=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OXNAS=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_LIBATA_LEDS=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=5 -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_PMU=y -# CONFIG_ARM_SMMU is not set -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_CMDLINE_PARSER=y -CONFIG_BLK_DEBUG_FS=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_PM=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_CC_HAS_KASAN_GENERIC=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMA=y -CONFIG_CMA_ALIGNMENT=8 -CONFIG_CMA_AREAS=7 -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_SIZE_MBYTES=64 -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -CONFIG_CMDLINE_PARTITION=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_OXNAS=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONTIG_ALLOC=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_ARM926T=y -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_LEGACY=y -CONFIG_CPU_PM=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_USE_DOMAINS=y -CONFIG_CRASH_CORE=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_CRYPTO_BLAKE2S=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_RNG2=y -CONFIG_DEBUG_ALIGN_RODATA=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_USER is not set -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DMA_CMA=y -CONFIG_DMA_REMAP=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -# CONFIG_DWMAC_DWC_QOS_ETH is not set -CONFIG_DWMAC_GENERIC=y -CONFIG_DWMAC_OXNAS=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_ELF_CORE=y -CONFIG_FAT_FS=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FREEZER=y -# CONFIG_FW_CACHE is not set -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PCI=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HID=y -CONFIG_HID_GENERIC=y -CONFIG_HWMON=y -CONFIG_HZ_FIXED=0 -CONFIG_ICPLUS_PHY=y -CONFIG_INET_DIAG=y -# CONFIG_INET_DIAG_DESTROY is not set -# CONFIG_INET_RAW_DIAG is not set -CONFIG_INET_TCP_DIAG=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -# CONFIG_ISDN is not set -# CONFIG_JFFS2_FS is not set -CONFIG_KALLSYMS=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_XZ is not set -CONFIG_KEXEC=y -CONFIG_KEXEC_CORE=y -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LIBFDT=y -CONFIG_LOCALVERSION_AUTO=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LZ4_DECOMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_MACH_OX810SE is not set -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_KUSER_HELPERS=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NLS=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OXNAS_RPS_TIMER=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PHY_OXNAS=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_OXNAS=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PM=y -CONFIG_PM_CLK=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_OXNAS=y -CONFIG_PPS=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_RCU_TRACE=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZ4=y -CONFIG_RD_LZMA=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y -CONFIG_REALTEK_PHY=y -CONFIG_REFCOUNT_FULL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_OXNAS=y -CONFIG_SCHED_DEBUG=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIO=y -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_SERPORT=y -CONFIG_SIMPLE_PM_BUS=y -CONFIG_SLUB_DEBUG=y -CONFIG_SOCK_DIAG=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPLIT_PTLOCK_CPUS=999999 -CONFIG_SRCU=y -CONFIG_STACKTRACE=y -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -# CONFIG_STMMAC_SELFTESTS is not set -# CONFIG_STRIP_ASM_SYMS is not set -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_SWPHY=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_TRACE_CLOCK=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -# CONFIG_UNWINDER_FRAME_POINTER is not set -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VERSATILE_FPGA_IRQ=y -CONFIG_VERSATILE_FPGA_IRQ_NR=4 -CONFIG_VFAT_FS=y -# CONFIG_VFP is not set -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_WATCHDOG is not set -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_X86=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c index a5d7b3de72..217c258565 100644 --- a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c +++ b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c @@ -2232,9 +2232,6 @@ static struct scsi_host_template sata_oxnas_sht = { .can_queue = SATA_OXNAS_QUEUE_DEPTH, .sg_tablesize = SATA_OXNAS_MAX_PRD, .dma_boundary = ATA_DMA_BOUNDARY, -#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 13, 0) - .unchecked_isa_dma = 0, -#endif }; diff --git a/target/linux/oxnas/patches-5.10/010-pogoplug-series-3.patch b/target/linux/oxnas/patches-5.10/010-pogoplug-series-3.patch deleted file mode 100644 index 44102352af..0000000000 --- a/target/linux/oxnas/patches-5.10/010-pogoplug-series-3.patch +++ /dev/null @@ -1,82 +0,0 @@ -- add compatible string -- add console to bootargs -- add led aliases -- adjust nand partition table ---- ---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -@@ -11,10 +11,10 @@ - / { - model = "Cloud Engines PogoPlug Series 3"; - -- compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; -+ compatible = "cloudengines,pogoplug-series-3", "cloudengines,pogoplugv3", "oxsemi,ox820"; - - chosen { -- bootargs = "earlyprintk"; -+ bootargs = "earlyprintk console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - -@@ -27,24 +27,28 @@ - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; -+ led-boot = &led_status; -+ led-failsafe = &led_warn; -+ led-running = &led_act; -+ led-upgrade = &led_warn; - }; - - leds { - compatible = "gpio-leds"; - -- blue { -+ led_status: blue { - label = "pogoplug:blue"; - gpios = <&gpio0 2 0>; - default-state = "keep"; - }; - -- orange { -+ led_warn: orange { - label = "pogoplug:orange"; - gpios = <&gpio1 16 1>; - default-state = "keep"; - }; - -- green { -+ led_act: green { - label = "pogoplug:green"; - gpios = <&gpio1 17 1>; - default-state = "keep"; -@@ -73,11 +77,27 @@ - nand-ecc-algo = "hamming"; - - partition@0 { -- label = "boot"; -- reg = <0x00000000 0x00e00000>; -+ label = "stage1"; -+ reg = <0x00000000 0x00040000>; - read-only; - }; - -+ partition@40000 { -+ label = "u-boot"; -+ reg = <0x00040000 0x00380000>; -+ read-only; -+ }; -+ -+ partition@3c0000 { -+ label = "u-boot-env"; -+ reg = <0x003c0000 0x00080000>; -+ }; -+ -+ partition@440000 { -+ label = "kernel"; -+ reg = <0x00440000 0x009c0000>; -+ }; -+ - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; diff --git a/target/linux/oxnas/patches-5.10/050-ox820-remove-left-overs.patch b/target/linux/oxnas/patches-5.10/050-ox820-remove-left-overs.patch deleted file mode 100644 index e30f328792..0000000000 --- a/target/linux/oxnas/patches-5.10/050-ox820-remove-left-overs.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 552ed4955c1fee1109bf5ba137dc35a411a1448c Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 1 Jun 2018 02:41:15 +0200 -Subject: [PATCH] arm: ox820: remove left-overs - -Signed-off-by: Daniel Golle ---- - drivers/clk/clk-oxnas.c | 2 -- - include/dt-bindings/clock/oxsemi,ox820.h | 32 +++++++++++------------- - 2 files changed, 14 insertions(+), 20 deletions(-) - ---- a/drivers/clk/clk-oxnas.c -+++ b/drivers/clk/clk-oxnas.c -@@ -29,8 +29,6 @@ struct oxnas_stdclk_data { - struct clk_hw_onecell_data *onecell_data; - struct clk_oxnas_gate **gates; - unsigned int ngates; -- struct clk_oxnas_pll **plls; -- unsigned int nplls; - }; - - /* Regmap offsets */ ---- a/include/dt-bindings/clock/oxsemi,ox820.h -+++ b/include/dt-bindings/clock/oxsemi,ox820.h -@@ -6,24 +6,20 @@ - #ifndef DT_CLOCK_OXSEMI_OX820_H - #define DT_CLOCK_OXSEMI_OX820_H - --/* PLLs */ --#define CLK_820_PLLA 0 --#define CLK_820_PLLB 1 -- - /* Gate Clocks */ --#define CLK_820_LEON 2 --#define CLK_820_DMA_SGDMA 3 --#define CLK_820_CIPHER 4 --#define CLK_820_SD 5 --#define CLK_820_SATA 6 --#define CLK_820_AUDIO 7 --#define CLK_820_USBMPH 8 --#define CLK_820_ETHA 9 --#define CLK_820_PCIEA 10 --#define CLK_820_NAND 11 --#define CLK_820_PCIEB 12 --#define CLK_820_ETHB 13 --#define CLK_820_REF600 14 --#define CLK_820_USBDEV 15 -+#define CLK_820_LEON 0 -+#define CLK_820_DMA_SGDMA 1 -+#define CLK_820_CIPHER 2 -+#define CLK_820_SD 3 -+#define CLK_820_SATA 4 -+#define CLK_820_AUDIO 5 -+#define CLK_820_USBMPH 6 -+#define CLK_820_ETHA 7 -+#define CLK_820_PCIEA 8 -+#define CLK_820_NAND 9 -+#define CLK_820_PCIEB 10 -+#define CLK_820_ETHB 11 -+#define CLK_820_REF600 12 -+#define CLK_820_USBDEV 13 - - #endif /* DT_CLOCK_OXSEMI_OX820_H */ diff --git a/target/linux/oxnas/patches-5.10/100-oxnas-clk-plla-pllb.patch b/target/linux/oxnas/patches-5.10/100-oxnas-clk-plla-pllb.patch deleted file mode 100644 index 6c795c1d25..0000000000 --- a/target/linux/oxnas/patches-5.10/100-oxnas-clk-plla-pllb.patch +++ /dev/null @@ -1,273 +0,0 @@ ---- a/drivers/clk/clk-oxnas.c -+++ b/drivers/clk/clk-oxnas.c -@@ -5,19 +5,42 @@ - * Copyright (C) 2016 Neil Armstrong - */ - -+#include -+#include - #include - #include - #include -+#include - #include - #include - #include - #include - #include - #include -+#include - - #include - #include - -+#define REF300_DIV_INT_SHIFT 8 -+#define REF300_DIV_FRAC_SHIFT 0 -+#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) -+#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) -+ -+#define PLLB_BYPASS 1 -+#define PLLB_ENSAT 3 -+#define PLLB_OUTDIV 4 -+#define PLLB_REFDIV 8 -+#define PLLB_DIV_INT_SHIFT 8 -+#define PLLB_DIV_FRAC_SHIFT 0 -+#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) -+#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) -+ -+#define PLLA_REFDIV_MASK 0x3F -+#define PLLA_REFDIV_SHIFT 8 -+#define PLLA_OUTDIV_MASK 0x7 -+#define PLLA_OUTDIV_SHIFT 4 -+ - /* Standard regmap gate clocks */ - struct clk_oxnas_gate { - struct clk_hw hw; -@@ -36,6 +59,135 @@ struct oxnas_stdclk_data { - #define CLK_SET_REGOFFSET 0x2c - #define CLK_CLR_REGOFFSET 0x30 - -+#define PLLA_CTRL0_REGOFFSET 0x1f0 -+#define PLLA_CTRL1_REGOFFSET 0x1f4 -+#define PLLB_CTRL0_REGOFFSET 0x1001f0 -+#define MHZ (1000 * 1000) -+ -+struct clk_oxnas_pll { -+ struct clk_hw hw; -+ struct device_node *devnode; -+ struct reset_control *rstc; -+ struct regmap *syscon; -+}; -+ -+#define to_clk_oxnas_pll(_hw) container_of(_hw, struct clk_oxnas_pll, hw) -+ -+static unsigned long plla_clk_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct clk_oxnas_pll *plla = to_clk_oxnas_pll(hw); -+ unsigned long fin = parent_rate; -+ unsigned long refdiv, outdiv; -+ unsigned int pll0, fbdiv; -+ -+ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL0_REGOFFSET, &pll0)); -+ -+ refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK; -+ refdiv += 1; -+ outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK; -+ outdiv += 1; -+ -+ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL1_REGOFFSET, &fbdiv)); -+ /* seems we will not be here when pll is bypassed, so ignore this -+ * case */ -+ -+ return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ; -+} -+ -+static const char *pll_clk_parents[] = { -+ "oscillator", -+}; -+ -+static struct clk_ops plla_ops = { -+ .recalc_rate = plla_clk_recalc_rate, -+}; -+ -+static struct clk_init_data clk_plla_init = { -+ .name = "plla", -+ .ops = &plla_ops, -+ .parent_names = pll_clk_parents, -+ .num_parents = ARRAY_SIZE(pll_clk_parents), -+}; -+ -+static int pllb_clk_is_prepared(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ return !!pllb->rstc; -+} -+ -+static int pllb_clk_prepare(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ pllb->rstc = of_reset_control_get(pllb->devnode, NULL); -+ -+ return IS_ERR(pllb->rstc) ? PTR_ERR(pllb->rstc) : 0; -+} -+ -+static void pllb_clk_unprepare(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ BUG_ON(IS_ERR(pllb->rstc)); -+ -+ reset_control_put(pllb->rstc); -+ pllb->rstc = NULL; -+} -+ -+static int pllb_clk_enable(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ BUG_ON(IS_ERR(pllb->rstc)); -+ -+ /* put PLL into bypass */ -+ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS)); -+ wmb(); -+ udelay(10); -+ reset_control_assert(pllb->rstc); -+ udelay(10); -+ /* set PLL B control information */ -+ regmap_write_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, 0xffff, -+ (1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV)); -+ reset_control_deassert(pllb->rstc); -+ udelay(100); -+ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), 0); -+ -+ return 0; -+} -+ -+static void pllb_clk_disable(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ BUG_ON(IS_ERR(pllb->rstc)); -+ -+ /* put PLL into bypass */ -+ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS)); -+ -+ wmb(); -+ udelay(10); -+ -+ reset_control_assert(pllb->rstc); -+} -+ -+static struct clk_ops pllb_ops = { -+ .prepare = pllb_clk_prepare, -+ .unprepare = pllb_clk_unprepare, -+ .is_prepared = pllb_clk_is_prepared, -+ .enable = pllb_clk_enable, -+ .disable = pllb_clk_disable, -+}; -+ -+static struct clk_init_data clk_pllb_init = { -+ .name = "pllb", -+ .ops = &pllb_ops, -+ .parent_names = pll_clk_parents, -+ .num_parents = ARRAY_SIZE(pll_clk_parents), -+}; -+ - static inline struct clk_oxnas_gate *to_clk_oxnas_gate(struct clk_hw *hw) - { - return container_of(hw, struct clk_oxnas_gate, hw); -@@ -249,3 +401,42 @@ static struct platform_driver oxnas_stdc - }, - }; - builtin_platform_driver(oxnas_stdclk_driver); -+ -+void __init oxnas_init_plla(struct device_node *np) -+{ -+ struct clk *clk; -+ struct clk_oxnas_pll *plla; -+ -+ plla = kmalloc(sizeof(*plla), GFP_KERNEL); -+ BUG_ON(!plla); -+ -+ plla->syscon = syscon_node_to_regmap(of_get_parent(np)); -+ plla->hw.init = &clk_plla_init; -+ plla->devnode = np; -+ plla->rstc = NULL; -+ clk = clk_register(NULL, &plla->hw); -+ BUG_ON(IS_ERR(clk)); -+ /* mark it as enabled */ -+ clk_prepare_enable(clk); -+ of_clk_add_provider(np, of_clk_src_simple_get, clk); -+} -+CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla); -+ -+void __init oxnas_init_pllb(struct device_node *np) -+{ -+ struct clk *clk; -+ struct clk_oxnas_pll *pllb; -+ -+ pllb = kmalloc(sizeof(*pllb), GFP_KERNEL); -+ BUG_ON(!pllb); -+ -+ pllb->syscon = syscon_node_to_regmap(of_get_parent(np)); -+ pllb->hw.init = &clk_pllb_init; -+ pllb->devnode = np; -+ pllb->rstc = NULL; -+ -+ clk = clk_register(NULL, &pllb->hw); -+ BUG_ON(IS_ERR(clk)); -+ of_clk_add_provider(np, of_clk_src_simple_get, clk); -+} -+CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb); ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -61,12 +61,6 @@ - clocks = <&osc>; - }; - -- plla: plla { -- compatible = "fixed-clock"; -- #clock-cells = <0>; -- clock-frequency = <850000000>; -- }; -- - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; -@@ -266,6 +260,19 @@ - compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; -+ -+ plla: plla { -+ compatible = "plxtech,nas782x-plla"; -+ #clock-cells = <0>; -+ clocks = <&osc>; -+ }; -+ -+ pllb: pllb { -+ compatible = "plxtech,nas782x-pllb"; -+ #clock-cells = <0>; -+ clocks = <&osc>; -+ resets = <&reset RESET_PLLB>; -+ }; - }; - }; - -@@ -287,6 +294,13 @@ - clocks = <&armclk>; - }; - -+ watchdog@620 { -+ compatible = "mpcore_wdt"; -+ reg = <0x620 0x20>; -+ interrupts = ; -+ clocks = <&armclk>; -+ }; -+ - gic: interrupt-controller@1000 { - compatible = "arm,arm11mp-gic"; - interrupt-controller; diff --git a/target/linux/oxnas/patches-5.10/150-oxnas-restart.patch b/target/linux/oxnas/patches-5.10/150-oxnas-restart.patch deleted file mode 100644 index c5b07fd5a7..0000000000 --- a/target/linux/oxnas/patches-5.10/150-oxnas-restart.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/power/reset/Kconfig -+++ b/drivers/power/reset/Kconfig -@@ -141,6 +141,12 @@ config POWER_RESET_OXNAS - help - Restart support for OXNAS/PLXTECH OX820 SoC. - -+config POWER_RESET_OXNAS -+ bool "OXNAS SoC restart driver" -+ depends on ARCH_OXNAS -+ help -+ Restart support for OXNAS boards. -+ - config POWER_RESET_PIIX4_POWEROFF - tristate "Intel PIIX4 power-off driver" - depends on PCI ---- a/drivers/power/reset/Makefile -+++ b/drivers/power/reset/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_POWER_RESET_QCOM_PON) += qc - obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o - obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o - obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o -+obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o - obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o - obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o - obj-$(CONFIG_POWER_RESET_ST) += st-poweroff.o diff --git a/target/linux/oxnas/patches-5.10/320-oxnas-phy-pcie.patch b/target/linux/oxnas/patches-5.10/320-oxnas-phy-pcie.patch deleted file mode 100644 index a590151e5c..0000000000 --- a/target/linux/oxnas/patches-5.10/320-oxnas-phy-pcie.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -247,6 +247,15 @@ - }; - }; - -+ pcie_phy: pcie-phy@a00000 { -+ compatible = "oxsemi,ox820-pcie-phy"; -+ reg = <0xa00000 0x10>; -+ #phy-cells = <0>; -+ resets = <&reset RESET_PCIEPHY>; -+ reset-names = "phy"; -+ status = "disabled"; -+ }; -+ - sys: sys-ctrl@e00000 { - compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"; - reg = <0xe00000 0x200000>; ---- a/drivers/phy/Kconfig -+++ b/drivers/phy/Kconfig -@@ -35,6 +35,13 @@ config PHY_LPC18XX_USB_OTG - This driver is need for USB0 support on LPC18xx/43xx and takes - care of enabling and clock setup. - -+config PHY_OXNAS -+ tristate "Oxford Semi. OX820 PCI-E PHY support" -+ depends on HAS_IOMEM && OF && (ARM || COMPILE_TEST) -+ select GENERIC_PHY -+ help -+ This option enables support for OXNAS OX820 SoC PCIE PHY. -+ - config PHY_PISTACHIO_USB - tristate "IMG Pistachio USB2.0 PHY driver" - depends on MACH_PISTACHIO ---- a/drivers/phy/Makefile -+++ b/drivers/phy/Makefile -@@ -6,6 +6,7 @@ - obj-$(CONFIG_GENERIC_PHY) += phy-core.o - obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o - obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o -+obj-$(CONFIG_PHY_OXNAS) += phy-oxnas-pcie.o - obj-$(CONFIG_PHY_XGENE) += phy-xgene.o - obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o - obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o diff --git a/target/linux/oxnas/patches-5.10/340-oxnas-pcie.patch b/target/linux/oxnas/patches-5.10/340-oxnas-pcie.patch deleted file mode 100644 index 01b5a188c3..0000000000 --- a/target/linux/oxnas/patches-5.10/340-oxnas-pcie.patch +++ /dev/null @@ -1,122 +0,0 @@ ---- a/drivers/pci/controller/Kconfig -+++ b/drivers/pci/controller/Kconfig -@@ -305,6 +305,11 @@ config PCIE_HISI_ERR - Say Y here if you want error handling support - for the PCIe controller's errors on HiSilicon HIP SoCs - -+config PCIE_OXNAS -+ bool "PLX Oxnas PCIe controller" -+ depends on ARCH_OXNAS -+ select PCIEPORTBUS -+ - source "drivers/pci/controller/dwc/Kconfig" - source "drivers/pci/controller/mobiveil/Kconfig" - source "drivers/pci/controller/cadence/Kconfig" ---- a/drivers/pci/controller/Makefile -+++ b/drivers/pci/controller/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rock - obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o - obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o - obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o -+obj-$(CONFIG_PCIE_OXNAS) += pcie-oxnas.o - obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o - obj-$(CONFIG_VMD) += vmd.o - obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -289,7 +289,7 @@ - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; -- ranges = <0 0x47000000 0x1000000>; -+ ranges = <0 0x47000000 0x2000>; - - scu: scu@0 { - compatible = "arm,arm11mp-scu"; -@@ -318,5 +318,86 @@ - <0x100 0x500>; - }; - }; -+ -+ pcie0: pcie-controller@47c00000 { -+ compatible = "plxtech,nas782x-pcie"; -+ device_type = "pci"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ /* flag & space bus address host address size */ -+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000 -+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000 -+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000 -+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>; -+ -+ bus-range = <0x00 0x7f>; -+ -+ /* cfg inbound translator */ -+ reg = <0x47c00000 0x1000>, <0x47d00000 0x100>; -+ -+ phys = <&pcie_phy>; -+ phy-names = "pcie-phy"; -+ -+ #interrupt-cells = <1>; -+ /* wild card mask, match all bus address & interrupt specifier */ -+ /* format: bus address mask, interrupt specifier mask */ -+ /* each bit 1 means need match, 0 means ignored when match */ -+ interrupt-map-mask = <0 0 0 0>; -+ /* format: a list of: bus address, interrupt specifier, -+ * parent interrupt controller & specifier */ -+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>; -+ gpios = <&gpio1 12 0>; -+ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>; -+ clock-names = "pcie", "busclk"; -+ resets = <&reset RESET_PCIEA>; -+ reset-names = "pcie"; -+ -+ plxtech,pcie-hcsl-bit = <2>; -+ plxtech,pcie-ctrl-offset = <0x120>; -+ plxtech,pcie-outbound-offset = <0x138>; -+ status = "disabled"; -+ }; -+ -+ pcie1: pcie-controller@47e00000 { -+ compatible = "plxtech,nas782x-pcie"; -+ device_type = "pci"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ /* flag & space bus address host address size */ -+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000 -+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000 -+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000 -+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>; -+ -+ bus-range = <0x80 0xff>; -+ -+ /* cfg inbound translator */ -+ reg = <0x47e00000 0x1000>, <0x47f00000 0x100>; -+ -+ phys = <&pcie_phy>; -+ phy-names = "pcie-phy"; -+ -+ #interrupt-cells = <1>; -+ /* wild card mask, match all bus address & interrupt specifier */ -+ /* format: bus address mask, interrupt specifier mask */ -+ /* each bit 1 means need match, 0 means ignored when match */ -+ interrupt-map-mask = <0 0 0 0>; -+ /* format: a list of: bus address, interrupt specifier, -+ * parent interrupt controller & specifier */ -+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>; -+ -+ /* gpios = <&gpio1 12 0>; */ -+ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>; -+ clock-names = "pcie", "busclk"; -+ resets = <&reset RESET_PCIEB>; -+ reset-names = "pcie"; -+ -+ plxtech,pcie-hcsl-bit = <3>; -+ plxtech,pcie-ctrl-offset = <0x124>; -+ plxtech,pcie-outbound-offset = <0x174>; -+ status = "disabled"; -+ }; - }; - }; diff --git a/target/linux/oxnas/patches-5.10/500-oxnas-sata.patch b/target/linux/oxnas/patches-5.10/500-oxnas-sata.patch deleted file mode 100644 index d3ec2e2d48..0000000000 --- a/target/linux/oxnas/patches-5.10/500-oxnas-sata.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -568,6 +568,14 @@ config SATA_VITESSE - - If unsure, say N. - -+config SATA_OXNAS -+ tristate "PLXTECH NAS782X SATA support" -+ select SATA_HOST -+ help -+ This option enables support for Nas782x Serial ATA controller. -+ -+ If unsure, say N. -+ - comment "PATA SFF controllers with BMDMA" - - config PATA_ALI ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -46,6 +46,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o - obj-$(CONFIG_SATA_ULI) += sata_uli.o - obj-$(CONFIG_SATA_VIA) += sata_via.o - obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o -+obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o - - # SFF PATA w/ BMDMA - obj-$(CONFIG_PATA_ALI) += pata_ali.o ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -399,5 +399,20 @@ - plxtech,pcie-outbound-offset = <0x174>; - status = "disabled"; - }; -+ -+ sata: sata@45900000 { -+ compatible = "plxtech,nas782x-sata"; -+ /* ports dmactl sgdma */ -+ reg = <0x45900000 0x20000>, <0x459A0000 0x40>, <0x459B0000 0x20>, -+ /* core phy descriptors (optional) */ -+ <0x459E0000 0x2000>, <0x44900000 0x0C>, <0x50000000 0x1000>; -+ interrupts = ; -+ clocks = <&stdclk CLK_820_SATA>; -+ resets = <&reset RESET_SATA>, <&reset RESET_SATA_LINK>, <&reset RESET_SATA_PHY>; -+ reset-names = "sata", "link", "phy"; -+ nr-ports = <1>; -+ status = "disabled"; -+ }; -+ - }; - }; ---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -@@ -111,3 +111,7 @@ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; - }; -+ -+&sata { -+ status = "okay"; -+}; diff --git a/target/linux/oxnas/patches-5.10/510-ox820-libata-leds.patch b/target/linux/oxnas/patches-5.10/510-ox820-libata-leds.patch deleted file mode 100644 index 05ae9ba44b..0000000000 --- a/target/linux/oxnas/patches-5.10/510-ox820-libata-leds.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/mach-oxnas/Kconfig -+++ b/arch/arm/mach-oxnas/Kconfig -@@ -2,6 +2,7 @@ - menuconfig ARCH_OXNAS - bool "Oxford Semiconductor OXNAS Family SoCs" - select ARCH_HAS_RESET_CONTROLLER -+ select ARCH_WANT_LIBATA_LEDS - select COMMON_CLK_OXNAS - select GPIOLIB - select MFD_SYSCON diff --git a/target/linux/oxnas/patches-5.10/800-oxnas-ehci.patch b/target/linux/oxnas/patches-5.10/800-oxnas-ehci.patch deleted file mode 100644 index 8b4d943810..0000000000 --- a/target/linux/oxnas/patches-5.10/800-oxnas-ehci.patch +++ /dev/null @@ -1,73 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -350,6 +350,13 @@ config USB_OCTEON_EHCI - USB 2.0 device support. All CN6XXX based chips with USB are - supported. - -+config USB_EHCI_OXNAS -+ tristate "OXNAS EHCI Module" -+ depends on USB_EHCI_HCD && ARCH_OXNAS -+ select USB_EHCI_ROOT_HUB_TT -+ help -+ Enable support for the OX820 SOC's on-chip EHCI controller. -+ - endif # USB_EHCI_HCD - - config USB_OXU210HP_HCD ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -48,6 +48,7 @@ obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci - obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o - obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o - obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o -+obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o - obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o - obj-$(CONFIG_USB_EHCI_BRCMSTB) += ehci-brcm.o - ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -106,6 +106,31 @@ - status = "disabled"; - }; - -+ ehci: ehci@40200100 { -+ compatible = "plxtech,nas782x-ehci"; -+ reg = <0x40200100 0xf00>; -+ interrupts = ; -+ clocks = <&stdclk CLK_820_USBMPH>, <&pllb>, <&stdclk CLK_820_REF600>; -+ clock-names = "usb", "refsrc", "phyref"; -+ resets = <&reset RESET_USBHS>, <&reset RESET_USBPHYA>, <&reset RESET_USBPHYB>; -+ reset-names = "host", "phya", "phyb"; -+ oxsemi,sys-ctrl = <&sys>; -+ /* Otherwise ref300 is used, which is derived from sata phy -+ * in that case, usb depends on sata initialization */ -+ /* FIXME: how to make this dependency explicit ? */ -+ oxsemi,ehci_use_pllb; -+ status = "disabled"; -+ -+ ehci_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ ehci_port2: port@2 { -+ reg = <2>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+ - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; ---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -@@ -105,6 +105,10 @@ - }; - }; - -+&ehci { -+ status = "okay"; -+}; -+ - ða { - status = "okay"; - diff --git a/target/linux/oxnas/patches-5.10/996-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/oxnas/patches-5.10/996-generic-Mangle-bootloader-s-kernel-arguments.patch deleted file mode 100644 index 8f56bdbf9c..0000000000 --- a/target/linux/oxnas/patches-5.10/996-generic-Mangle-bootloader-s-kernel-arguments.patch +++ /dev/null @@ -1,189 +0,0 @@ -From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 -From: Adrian Panella -Date: Thu, 9 Mar 2017 09:37:17 +0100 -Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments - -The command-line arguments provided by the boot loader will be -appended to a new device tree property: bootloader-args. -If there is a property "append-rootblock" in DT under /chosen -and a root= option in bootloaders command line it will be parsed -and added to DT bootargs with the form: XX. -Only command line ATAG will be processed, the rest of the ATAGs -sent by bootloader will be ignored. -This is usefull in dual boot systems, to get the current root partition -without afecting the rest of the system. - -Signed-off-by: Adrian Panella ---- - arch/arm/Kconfig | 11 +++++ - arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++- - init/main.c | 16 ++++++++ - 3 files changed, 98 insertions(+), 1 deletion(-) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1777,6 +1777,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN - The command-line arguments provided by the boot loader will be - appended to the the device tree bootargs property. - -+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ bool "Append rootblock parsing bootloader's kernel arguments" -+ help -+ The command-line arguments provided by the boot loader will be -+ appended to a new device tree property: bootloader-args. -+ If there is a property "append-rootblock" in DT under /chosen -+ and a root= option in bootloaders command line it will be parsed -+ and added to DT bootargs with the form: XX. -+ Only command line ATAG will be processed, the rest of the ATAGs -+ sent by bootloader will be ignored. -+ - endchoice - - config CMDLINE ---- a/arch/arm/boot/compressed/atags_to_fdt.c -+++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -5,6 +5,8 @@ - - #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) - #define do_extend_cmdline 1 -+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#define do_extend_cmdline 1 - #else - #define do_extend_cmdline 0 - #endif -@@ -69,6 +71,59 @@ static uint32_t get_cell_size(const void - return cell_size; - } - -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ -+static char *append_rootblock(char *dest, const char *str, int len, void *fdt) -+{ -+ char *ptr, *end; -+ char *root="root="; -+ int i, l; -+ const char *rootblock; -+ -+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually -+ ptr = str - 1; -+ -+ do { -+ //first find an 'r' at the begining or after a space -+ do { -+ ptr++; -+ ptr = strchr(ptr, 'r'); -+ if(!ptr) return dest; -+ -+ } while (ptr != str && *(ptr-1) != ' '); -+ -+ //then check for the rest -+ for(i = 1; i <= 4; i++) -+ if(*(ptr+i) != *(root+i)) break; -+ -+ } while (i != 5); -+ -+ end = strchr(ptr, ' '); -+ end = end ? (end - 1) : (strchr(ptr, 0) - 1); -+ -+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX ) -+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); -+ ptr = end + 1; -+ -+ /* if append-rootblock property is set use it to append to command line */ -+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); -+ if(rootblock != NULL) { -+ if(*dest != ' ') { -+ *dest = ' '; -+ dest++; -+ len++; -+ } -+ if (len + l + i <= COMMAND_LINE_SIZE) { -+ memcpy(dest, rootblock, l); -+ dest += l - 1; -+ memcpy(dest, ptr, i); -+ dest += i; -+ } -+ } -+ return dest; -+} -+#endif -+ - static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) - { - char cmdline[COMMAND_LINE_SIZE]; -@@ -88,12 +143,21 @@ static void merge_fdt_bootargs(void *fdt - - /* and append the ATAG_CMDLINE */ - if (fdt_cmdline) { -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //save original bootloader args -+ //and append ubi.mtd with root partition number to current cmdline -+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); -+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); -+ -+#else - len = strlen(fdt_cmdline); - if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { - *ptr++ = ' '; - memcpy(ptr, fdt_cmdline, len); - ptr += len; - } -+#endif - } - *ptr = '\0'; - -@@ -168,7 +232,9 @@ int atags_to_fdt(void *atag_list, void * - else - setprop_string(fdt, "/chosen", "bootargs", - atag->u.cmdline.cmdline); -- } else if (atag->hdr.tag == ATAG_MEM) { -+ } -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ else if (atag->hdr.tag == ATAG_MEM) { - if (memcount >= sizeof(mem_reg_property)/4) - continue; - if (!atag->u.mem.size) -@@ -212,6 +278,10 @@ int atags_to_fdt(void *atag_list, void * - setprop(fdt, "/memory", "reg", mem_reg_property, - 4 * memcount * memsize); - } -+#else -+ -+ } -+#endif - - return fdt_pack(fdt); - } ---- a/init/main.c -+++ b/init/main.c -@@ -110,6 +110,10 @@ - - #include - -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#include -+#endif -+ - static int kernel_init(void *); - - extern void init_IRQ(void); -@@ -904,6 +908,18 @@ asmlinkage __visible void __init __no_sa - page_alloc_init(); - - pr_notice("Kernel command line: %s\n", saved_command_line); -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //Show bootloader's original command line for reference -+ if(of_chosen) { -+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); -+ if(prop) -+ pr_notice("Bootloader command line (ignored): %s\n", prop); -+ else -+ pr_notice("Bootloader command line not present\n"); -+ } -+#endif -+ - /* parameters may set static keys */ - jump_label_init(); - parse_early_param(); diff --git a/target/linux/oxnas/patches-5.10/999-libata-hacks.patch b/target/linux/oxnas/patches-5.10/999-libata-hacks.patch deleted file mode 100644 index 461a1b87f4..0000000000 --- a/target/linux/oxnas/patches-5.10/999-libata-hacks.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- a/drivers/ata/libata-core.c -+++ b/drivers/ata/libata-core.c -@@ -1528,6 +1528,14 @@ unsigned ata_exec_internal_sg(struct ata - return AC_ERR_SYSTEM; - } - -+ if (ap->ops->acquire_hw && !ap->ops->acquire_hw(ap, 0, 0)) { -+ spin_unlock_irqrestore(ap->lock, flags); -+ if (!ap->ops->acquire_hw(ap, 1, (2*HZ))) { -+ return AC_ERR_TIMEOUT; -+ } -+ spin_lock_irqsave(ap->lock, flags); -+ } -+ - /* initialize internal qc */ - qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL); - -@@ -4562,6 +4570,9 @@ struct ata_queued_cmd *ata_qc_new_init(s - if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) - return NULL; - -+ if (ap->ops->qc_new && ap->ops->qc_new(ap)) -+ return NULL; -+ - /* libsas case */ - if (ap->flags & ATA_FLAG_SAS_HOST) { - tag = ata_sas_allocate_tag(ap); -@@ -4607,6 +4618,8 @@ void ata_qc_free(struct ata_queued_cmd * - qc->tag = ATA_TAG_POISON; - if (ap->flags & ATA_FLAG_SAS_HOST) - ata_sas_free_tag(tag, ap); -+ if (ap->ops->qc_free) -+ ap->ops->qc_free(qc); - } - } - ---- a/include/linux/libata.h -+++ b/include/linux/libata.h -@@ -912,6 +912,8 @@ struct ata_port_operations { - enum ata_completion_errors (*qc_prep)(struct ata_queued_cmd *qc); - unsigned int (*qc_issue)(struct ata_queued_cmd *qc); - bool (*qc_fill_rtf)(struct ata_queued_cmd *qc); -+ int (*qc_new)(struct ata_port *ap); -+ void (*qc_free)(struct ata_queued_cmd *qc); - - /* - * Configuration and exception handling -@@ -1002,6 +1004,9 @@ struct ata_port_operations { - void (*phy_reset)(struct ata_port *ap); - void (*eng_timeout)(struct ata_port *ap); - -+ int (*acquire_hw)(struct ata_port *ap, int may_sleep, -+ int timeout_jiffies); -+ - /* - * ->inherits must be the last field and all the preceding - * fields must be pointers.