From: Gabor Juhos Date: Tue, 8 Dec 2009 10:29:37 +0000 (+0000) Subject: ar71xx: register rtl8366_smi device on the WNDR3700 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=63d8f159dbe18944df5da24d09d2aee78a88612c;p=openwrt%2Fstaging%2Fjow.git ar71xx: register rtl8366_smi device on the WNDR3700 SVN-Revision: 18695 --- diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c index 5f95270adf..25b5fc0624 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -34,6 +35,9 @@ #define WNDR3700_GPIO_BTN_RESET 8 #define WNDR3700_GPIO_BTN_WIFI 11 +#define WNDR3700_GPIO_RTL8366_SDA 5 +#define WNDR3700_GPIO_RTL8366_SCK 7 + #define WNDR3700_BUTTONS_POLL_INTERVAL 20 #ifdef CONFIG_MTD_PARTITIONS @@ -274,20 +278,34 @@ static struct gpio_button wndr3700_gpio_buttons[] __initdata = { } }; +static struct rtl8366_smi_platform_data wndr3700_rtl8366_smi_data = { + .gpio_sda = WNDR3700_GPIO_RTL8366_SDA, + .gpio_sck = WNDR3700_GPIO_RTL8366_SCK, +}; + +static struct platform_device wndr3700_rtl8366_smi_device = { + .name = "rtl8366-smi", + .id = -1, + .dev = { + .platform_data = &wndr3700_rtl8366_smi_data, + } +}; + static void __init wndr3700_setup(void) { u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); ar71xx_set_mac_base(mac); - ar71xx_add_device_mdio(0x0); ar71xx_eth0_pll_data.pll_1000 = 0x11110000; + ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev; ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth0_data.phy_mask = 0xf; ar71xx_eth0_data.speed = SPEED_1000; ar71xx_eth0_data.duplex = DUPLEX_FULL; ar71xx_eth1_pll_data.pll_1000 = 0x11110000; + ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev; ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth1_data.phy_mask = 0x10; @@ -306,6 +324,7 @@ static void __init wndr3700_setup(void) ARRAY_SIZE(wndr3700_gpio_buttons), wndr3700_gpio_buttons); + platform_device_register(&wndr3700_rtl8366_smi_device); wndr3700_pci_init(); }