From: Geert Uytterhoeven Date: Mon, 27 May 2019 12:19:35 +0000 (+0200) Subject: spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait() X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=635bdb7a3e1fe1531573ff87b92c2506adafe7f7;p=openwrt%2Fstaging%2Fblogic.git spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait() While the Hardware User Manual does not document the maximum time needed for modifying bits in the MSIOF Control Register, experiments on R-Car Gen2/Gen3 and SH-Mobile AG5 revealed the following typical modification times for the various bits: - CTR.TXE and CTR.RXE: no delay, - CTR.TSCKE: less than 10 ns, - CTR.TFSE: up to a few hundred ns (depending on SPI transfer clock, i.e. less for faster transfers). There are no reasons to believe these figures are different for SH-MobileR2 SoCs (SH7723/SH7724). Hence the minimum busy-looping delay of 10 µs is excessive. Reduce the delay per loop iteration from 10 to 1 us, and the maximum delay from 1000 to 100 µs. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 6aab7b2136db..b50bdbc27e58 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -229,7 +229,7 @@ static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p, sh_msiof_write(p, CTR, data); return readl_poll_timeout_atomic(p->mapbase + CTR, data, - (data & mask) == set, 10, 1000); + (data & mask) == set, 1, 100); } static irqreturn_t sh_msiof_spi_irq(int irq, void *data)