From: Arun Chandran Date: Sun, 1 Mar 2015 06:08:02 +0000 (+0530) Subject: net: macb: Add on the fly CPU endianness detection X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=62f6924cb1543a10d05150d77f9a5e01e12c9ce1;p=openwrt%2Fstaging%2Fblogic.git net: macb: Add on the fly CPU endianness detection Program management descriptor's access mode according to the dynamically detected CPU endianness. Signed-off-by: Arun Chandran Acked-by: Nicolas Ferre Tested-by: Michal Simek Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 05fb36da0cff..1fe8b946243a 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -1578,6 +1578,7 @@ static u32 macb_dbw(struct macb *bp) static void macb_configure_dma(struct macb *bp) { u32 dmacfg; + u32 tmp, ncr; if (macb_is_gem(bp)) { dmacfg = gem_readl(bp, DMACFG) & ~GEM_BF(RXBS, -1L); @@ -1586,10 +1587,23 @@ static void macb_configure_dma(struct macb *bp) dmacfg = GEM_BFINS(FBLDO, bp->dma_burst_length, dmacfg); dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L); dmacfg &= ~GEM_BIT(ENDIA_PKT); - /* Tell the chip to byteswap descriptors on big-endian hosts */ -#ifdef __BIG_ENDIAN - dmacfg |= GEM_BIT(ENDIA_DESC); -#endif + + /* Find the CPU endianness by using the loopback bit of net_ctrl + * register. save it first. When the CPU is in big endian we + * need to program swaped mode for management descriptor access. + */ + ncr = macb_readl(bp, NCR); + __raw_writel(MACB_BIT(LLB), bp->regs + MACB_NCR); + tmp = __raw_readl(bp->regs + MACB_NCR); + + if (tmp == MACB_BIT(LLB)) + dmacfg &= ~GEM_BIT(ENDIA_DESC); + else + dmacfg |= GEM_BIT(ENDIA_DESC); /* CPU in big endian */ + + /* Restore net_ctrl */ + macb_writel(bp, NCR, ncr); + if (bp->dev->features & NETIF_F_HW_CSUM) dmacfg |= GEM_BIT(TXCOEN); else