From: Hans de Goede Date: Sat, 25 Oct 2014 18:16:33 +0000 (+0200) Subject: sun6i: Add clock functions needed for SPL / DRAM init X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=62c87ef2e988558edbf983c9344ceb9370dbbf02;p=project%2Fbcm63xx%2Fu-boot.git sun6i: Add clock functions needed for SPL / DRAM init Add clock_init_safe and clockset_pll5 functions, as these are needed for SPL support resp. DRAM init (which is needed for SPL too). Also add some extra clock register constant defines. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c index 1eae9767d0..16ab6f3729 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -16,6 +16,33 @@ #include #include +#ifdef CONFIG_SPL_BUILD +void clock_init_safe(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_prcm_reg * const prcm = + (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; + + /* Set PLL ldo voltage without this PLL6 does not work properly */ + clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK, + PRCM_PLL_CTRL_LDO_KEY); + clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK, + PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN | + PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140)); + clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK); + + clock_set_pll1(408000000); + + writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div); + + writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); + + writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg); + writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg); +} +#endif + void clock_init_uart(void) { struct sunxi_ccm_reg *const ccm = @@ -65,6 +92,56 @@ int clock_twi_onoff(int port, int state) return 0; } +#ifdef CONFIG_SPL_BUILD +void clock_set_pll1(unsigned int clk) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + int k = 1; + int m = 1; + + if (clk > 1152000000) { + k = 2; + } else if (clk > 768000000) { + k = 3; + m = 2; + } + + /* Switch to 24MHz clock while changing PLL1 */ + writel(AXI_DIV_3 << AXI_DIV_SHIFT | + ATB_DIV_2 << ATB_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_axi_cfg); + + /* PLL1 rate = 24000000 * n * k / m */ + writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_MAGIC | + CCM_PLL1_CTRL_N(clk / (24000000 * k / m)) | + CCM_PLL1_CTRL_K(k) | CCM_PLL1_CTRL_M(m), &ccm->pll1_cfg); + sdelay(200); + + /* Switch CPU to PLL1 */ + writel(AXI_DIV_3 << AXI_DIV_SHIFT | + ATB_DIV_2 << ATB_DIV_SHIFT | + CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, + &ccm->cpu_axi_cfg); +} +#endif + +void clock_set_pll5(unsigned int clk) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + const int k = 2; + const int m = 1; + + /* PLL5 rate = 24000000 * n * k / m */ + writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD | + CCM_PLL5_CTRL_N(clk / (24000000 * k / m)) | + CCM_PLL5_CTRL_K(k) | CCM_PLL5_CTRL_M(m), &ccm->pll5_cfg); + + udelay(5500); +} + unsigned int clock_get_pll6(void) { struct sunxi_ccm_reg *const ccm = diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index 42382a8ae2..b40c16b6e7 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -25,6 +25,7 @@ int clock_init(void); int clock_twi_onoff(int port, int state); void clock_set_pll1(unsigned int hz); +void clock_set_pll5(unsigned int hz); unsigned int clock_get_pll5p(void); unsigned int clock_get_pll6(void); void clock_init_safe(void); diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index 1397b35889..4992dbc503 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -170,7 +170,17 @@ struct sunxi_ccm_reg { #define CPU_CLK_SRC_OSC24M 1 #define CPU_CLK_SRC_PLL1 2 -#define PLL1_CFG_DEFAULT 0x90011b21 +#define CCM_PLL1_CTRL_M(n) ((((n) - 1) & 0x3) << 0) +#define CCM_PLL1_CTRL_K(n) ((((n) - 1) & 0x3) << 4) +#define CCM_PLL1_CTRL_N(n) ((((n) - 1) & 0x1f) << 8) +#define CCM_PLL1_CTRL_MAGIC (0x1 << 16) +#define CCM_PLL1_CTRL_EN (0x1 << 31) + +#define CCM_PLL5_CTRL_M(n) ((((n) - 1) & 0x3) << 0) +#define CCM_PLL5_CTRL_K(n) ((((n) - 1) & 0x3) << 4) +#define CCM_PLL5_CTRL_N(n) ((((n) - 1) & 0x1f) << 8) +#define CCM_PLL5_CTRL_UPD (0x1 << 20) +#define CCM_PLL5_CTRL_EN (0x1 << 31) #define PLL6_CFG_DEFAULT 0x90041811 @@ -179,6 +189,11 @@ struct sunxi_ccm_reg { #define CCM_PLL6_CTRL_K_SHIFT 4 #define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT) +#define AHB1_ABP1_DIV_DEFAULT 0x00002020 + +#define AXI_GATE_OFFSET_DRAM 0 + +#define AHB_GATE_OFFSET_MCTL 14 #define AHB_GATE_OFFSET_MMC3 11 #define AHB_GATE_OFFSET_MMC2 10 #define AHB_GATE_OFFSET_MMC1 9 @@ -190,6 +205,16 @@ struct sunxi_ccm_reg { #define CCM_MMC_CTRL_ENABLE (0x1 << 31) +#define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */ + +#define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8) +#define CCM_DRAMCLK_CFG_DIV0_MASK (0xf << 8) +#define CCM_DRAMCLK_CFG_UPD (0x1 << 16) +#define CCM_DRAMCLK_CFG_RST (0x1 << 31) + +#define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */ + +#define AHB_RESET_OFFSET_MCTL 14 #define AHB_RESET_OFFSET_MMC3 11 #define AHB_RESET_OFFSET_MMC2 10 #define AHB_RESET_OFFSET_MMC1 9 diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h index 3d3bfa6cd1..88de1ff675 100644 --- a/arch/arm/include/asm/arch-sunxi/prcm.h +++ b/arch/arm/include/asm/arch-sunxi/prcm.h @@ -119,6 +119,7 @@ #define PRCM_PLL_CTRL_LDO_OUT_HV(n) \ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160) #define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24) +#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24) #define PRCM_CLK_1WIRE_GATE (0x1 << 31) diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index b7144745c9..9558771515 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -14,6 +14,7 @@ /* * A31 specific configuration */ +#define CONFIG_CLK_FULL_SPEED 1008000000 #define CONFIG_SYS_PROMPT "sun6i# "