From: David Bauer Date: Tue, 18 Jun 2019 22:07:12 +0000 (+0200) Subject: ath79: correct various phy-mode properties X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=62abbd587dc9;p=openwrt%2Fstaging%2Fadrian.git ath79: correct various phy-mode properties Upstream commit 6d4cd04 changes how the internal delays of the AR803x based PHYs are enabled. With this commit, all internal delays are disabled on driver probe and enabled based on the 'phy-mode' property in the device-tree. Before this commit, the RX delay was always enabled upon soft-reset while the TX delay retained it's previous state. A hard reset enabled the RX delay while the TX delay was disabled. Because of this inconsistency, wrongly specified PHY-modes were working correctly while the hardware was in a different state. Fix the PHY-modes of some affected devices (and clean up misplaced properties along the way) to keep the devices working flawlessly with kernels >= 5.1. Signed-off-by: David Bauer --- diff --git a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts index a1a912383f..812da3dea5 100644 --- a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts +++ b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts @@ -162,7 +162,6 @@ phy0: ethernet-phy@0 { reg = <0>; - phy-mode = "rgmii"; }; }; @@ -173,6 +172,6 @@ mtd-mac-address = <&art 0x0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts index 5900d8b487..a844ce777c 100644 --- a/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts +++ b/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts @@ -40,6 +40,7 @@ ð0 { pll-data = <0xbe000000 0x80000101 0x80001313>; + phy-mode = "rgmii-id"; }; &gmac_config { diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1750c.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1750c.dts index b5a2954406..567f3c9ee4 100644 --- a/target/linux/ath79/dts/qca9558_devolo_dvl1750c.dts +++ b/target/linux/ath79/dts/qca9558_devolo_dvl1750c.dts @@ -38,6 +38,10 @@ }; }; +ð0 { + phy-mode = "rgmii-id"; +}; + &gmac_config { rxdv-delay = <3>; rxd-delay = <3>; diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1750i.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1750i.dts index bd3702eb36..e0bdd20937 100644 --- a/target/linux/ath79/dts/qca9558_devolo_dvl1750i.dts +++ b/target/linux/ath79/dts/qca9558_devolo_dvl1750i.dts @@ -40,6 +40,7 @@ ð0 { pll-data = <0xbe000000 0x80000101 0x80001313>; + phy-mode = "rgmii-id"; }; &gmac_config { diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi b/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi index 9937186b1e..cfd43c8e8a 100644 --- a/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi +++ b/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi @@ -115,6 +115,7 @@ mtd-mac-address = <&art 0x00>; phy-handle = <&phy4>; + phy-mode = "rgmii-rxid"; pll-data = <0xae000000 0x80000101 0x80001313>; gmac_config: gmac-config { diff --git a/target/linux/ath79/dts/qca9558_ocedo_koala.dts b/target/linux/ath79/dts/qca9558_ocedo_koala.dts index 23835492a3..a80155b08c 100644 --- a/target/linux/ath79/dts/qca9558_ocedo_koala.dts +++ b/target/linux/ath79/dts/qca9558_ocedo_koala.dts @@ -142,8 +142,6 @@ phy5: ethernet-phy@5 { reg = <5>; - phy-mode = "rgmii-rxid"; - at803x-disable-smarteee; }; };