From: Robert Marko <robimarko@gmail.com>
Date: Tue, 7 May 2024 11:53:23 +0000 (+0200)
Subject: ipq40xx: use existing labels for UART nodes
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=625e912d758050390528b9fc285f5f8c53fe5f4e;p=openwrt%2Fstaging%2Fblocktrron.git

ipq40xx: use existing labels for UART nodes

Some boards are still defininig UART nodes under soc instead of using the
existing upstream labels to reference them so convert them.

Link: https://github.com/openwrt/openwrt/pull/15415
Signed-off-by: Robert Marko <robimarko@gmail.com>
---

diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-e2600ac.dtsi
index 80f187c89c..42648c9b00 100644
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-e2600ac.dtsi
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-e2600ac.dtsi
@@ -53,18 +53,6 @@
 			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 		};
 
-		serial@78af000 {
-			pinctrl-0 = <&serial_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
 		i2c@78b7000 { /* BLSP1 QUP2 */
 			pinctrl-0 = <&i2c_0_pins>;
 			pinctrl-names = "default";
@@ -200,6 +188,18 @@
 	};
 };
 
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &usb3 {
 	status = "okay";
 };
diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts
index 23dbf9f991..082b209bf8 100644
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts
@@ -284,18 +284,6 @@
 			status = "okay";
 		};
 
-		serial@78af000 {
-			pinctrl-0 = <&serial_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
 		pcie0: pci@40000000 {
 			status = "okay";
 			perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
@@ -318,6 +306,18 @@
 	status = "okay";
 };
 
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &watchdog {
 	status = "okay";
 };
diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi
index 0aee1716d6..bebad6f1e6 100644
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi
@@ -63,17 +63,6 @@
 			reg = <0x1957000 0x100>;
 			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			bluetooth {
-				compatible = "ti,cc2650";
-				enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-			};
-		};
 	};
 
 	keys {
@@ -120,6 +109,17 @@
 	status = "okay";
 };
 
+&blsp1_uart2 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,cc2650";
+		enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &cryptobam {
 	status = "okay";
 };