From: Zhao Qiang <B45475@freescale.com>
Date: Fri, 21 Mar 2014 08:21:46 +0000 (+0800)
Subject: T1040QDS/U-QE: Add u-qe support to t1040qds
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6259e291341d4c3753c7ce0e61d2bf8bdc5eacf0;p=project%2Fbcm63xx%2Fu-boot.git

T1040QDS/U-QE: Add u-qe support to t1040qds

Add u-qe support for t1040qds

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
---

diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c
index f1d7cdef6f..0e83d172da 100644
--- a/board/freescale/t1040qds/t1040qds.c
+++ b/board/freescale/t1040qds/t1040qds.c
@@ -18,6 +18,7 @@
 #include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
+#include <hwconfig.h>
 #include <asm/mpc85xx_gpio.h>
 
 #include "../common/qixis.h"
@@ -90,6 +91,30 @@ int select_i2c_ch_pca9547(u8 ch)
 	return 0;
 }
 
+static void qe_board_setup(void)
+{
+	u8 brdcfg15, brdcfg9;
+
+	if (hwconfig("qe") && hwconfig("tdm")) {
+		brdcfg15 = QIXIS_READ(brdcfg[15]);
+		/*
+		 * TDMRiser uses QE-TDM
+		 * Route QE_TDM signals to TDM Riser slot
+		 */
+		QIXIS_WRITE(brdcfg[15], brdcfg15 | 7);
+	} else if (hwconfig("qe") && hwconfig("uart")) {
+		brdcfg15 = QIXIS_READ(brdcfg[15]);
+		brdcfg9 = QIXIS_READ(brdcfg[9]);
+		/*
+		 * Route QE_TDM signals to UCC
+		 * ProfiBus controlled by UCC3
+		 */
+		brdcfg15 &= 0xfc;
+		QIXIS_WRITE(brdcfg[15], brdcfg15 | 2);
+		QIXIS_WRITE(brdcfg[9], brdcfg9 | 4);
+	}
+}
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_SYS_FLASH_BASE
@@ -197,6 +222,8 @@ int misc_init_r(void)
 		}
 	}
 
+	qe_board_setup();
+
 	return 0;
 }
 
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 745a2f22f9..6cc4e92ff2 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -601,6 +601,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
+#define CONFIG_QE
+#define CONFIG_U_QE
 /* Default address of microcode for the Linux Fman driver */
 #if defined(CONFIG_SPIFLASH)
 /*
@@ -623,6 +625,7 @@ unsigned long get_board_ddr_clk(void);
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
+#define CONFIG_SYS_QE_FW_ADDR		0xEFF10000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)