From: Martin Hundebøll Date: Mon, 21 Oct 2019 08:08:38 +0000 (+0200) Subject: rtc: pcf2127: handle boot-enabled watchdog feature X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=62409933b8d5afc9f09878608f3a38cf1b5467c2;p=openwrt%2Fstaging%2Fblogic.git rtc: pcf2127: handle boot-enabled watchdog feature Linux should handle when the pcf2127 watchdog feature is enabled by the bootloader. This is done by checking the watchdog timer value during init, and set the WDOG_HW_RUNNING flag if the value differs from zero. Signed-off-by: Martin Hundebøll Acked-by: Guenter Roeck Link: https://lore.kernel.org/r/20191021080838.2789-1-martin@geanix.com Signed-off-by: Alexandre Belloni --- diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index 02b069caffd5..ba5baaca47be 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -417,6 +417,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, const char *name, bool has_nvmem) { struct pcf2127 *pcf2127; + u32 wdd_timeout; int ret = 0; dev_dbg(dev, "%s\n", __func__); @@ -459,7 +460,6 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, /* * Watchdog timer enabled and reset pin /RST activated when timed out. * Select 1Hz clock source for watchdog timer. - * Timer is not started until WD_VAL is loaded with a valid value. * Note: Countdown timer disabled and not available. */ ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_WD_CTL, @@ -475,6 +475,14 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, return ret; } + /* Test if watchdog timer is started by bootloader */ + ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout); + if (ret) + return ret; + + if (wdd_timeout) + set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status); + #ifdef CONFIG_WATCHDOG ret = devm_watchdog_register_device(dev, &pcf2127->wdd); if (ret)