From: Zoltan Herpai Date: Fri, 30 Jan 2015 00:17:16 +0000 (+0000) Subject: sunxi: add support for Lamobo R1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=620f8c091d869f3239b517fba1a98488d78a7015;p=openwrt%2Fsvn-archive%2Farchive.git sunxi: add support for Lamobo R1 Signed-off-by: Daniel Golle SVN-Revision: 44214 --- diff --git a/target/linux/sunxi/base-files/etc/uci-defaults/02_network b/target/linux/sunxi/base-files/etc/uci-defaults/02_network index d801677958..372fed9e26 100644 --- a/target/linux/sunxi/base-files/etc/uci-defaults/02_network +++ b/target/linux/sunxi/base-files/etc/uci-defaults/02_network @@ -16,6 +16,12 @@ case "$( sunxi_board_name )" in "olinuxino-micro"*) ucidef_set_interface_lan 'wlan0' ;; +"lamobo-r1") + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "4 0 1 2 8t" + ucidef_add_switch_vlan "switch0" "2" "3 8t" + ;; *) ucidef_set_interface_lan 'eth0' ;; diff --git a/target/linux/sunxi/base-files/lib/sunxi.sh b/target/linux/sunxi/base-files/lib/sunxi.sh index d4dd9fedc4..444c7e972d 100644 --- a/target/linux/sunxi/base-files/lib/sunxi.sh +++ b/target/linux/sunxi/base-files/lib/sunxi.sh @@ -105,6 +105,10 @@ sunxi_board_detect() { board="i12-tvbox" ;; + "Lamobo R1") + board="lamobo-r1" + ;; + "Olimex A20-OLinuXino-LIME") board="olinuxino-lime" ;; diff --git a/target/linux/sunxi/config-3.18 b/target/linux/sunxi/config-3.18 index 68f15939d7..3513f6ab3b 100644 --- a/target/linux/sunxi/config-3.18 +++ b/target/linux/sunxi/config-3.18 @@ -58,6 +58,11 @@ CONFIG_AUDIT=y CONFIG_AUDIT_GENERIC=y CONFIG_AUTO_ZRELADDR=y CONFIG_AVERAGE=y +CONFIG_B53=y +# CONFIG_B53_MMAP_DRIVER is not set +CONFIG_B53_PHY_DRIVER=y +CONFIG_B53_PHY_FIXUP=y +# CONFIG_B53_SRAB_DRIVER is not set CONFIG_BINFMT_MISC=y CONFIG_BLK_CGROUP=y CONFIG_BLK_DEV_SD=y @@ -427,6 +432,7 @@ CONFIG_STRICT_DEVMEM=y CONFIG_SUN4I_TIMER=y CONFIG_SUN5I_HSTIMER=y CONFIG_SUNXI_WATCHDOG=y +CONFIG_SWCONFIG=y CONFIG_SWIOTLB=y CONFIG_SWP_EMULATE=y CONFIG_SYSFS_SYSCALL=y diff --git a/target/linux/sunxi/image/Makefile b/target/linux/sunxi/image/Makefile index 4475aa8eab..f627ee3e3e 100644 --- a/target/linux/sunxi/image/Makefile +++ b/target/linux/sunxi/image/Makefile @@ -24,7 +24,8 @@ BOARDS:= \ sun7i-a20-cubietruck \ sun7i-a20-olinuxino-lime \ sun7i-a20-olinuxino-micro \ - sun7i-a20-pcduino3 + sun7i-a20-pcduino3 \ + sun7i-a20-lamobo-r1 define Image/BuildKernel mkimage -A arm -O linux -T kernel -C none \ @@ -88,6 +89,10 @@ define Image/Build/Profile/Bananapro $(call Image/Build/SDCard,$(1),sun7i-a20-bananapro) endef +define Image/Build/Profile/Lamobo_R1 + $(call Image/Build/SDCard,$(1),sun7i-a20-lamobo-r1) +endef + define Image/Build/Profile/Cubieboard $(call Image/Build/SDCard,$(1),sun4i-a10-cubieboard) endef diff --git a/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch b/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch new file mode 100644 index 0000000000..82c8bd5a47 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch @@ -0,0 +1,252 @@ +Index: linux-3.18.2/arch/arm/boot/dts/Makefile +=================================================================== +--- linux-3.18.2.orig/arch/arm/boot/dts/Makefile ++++ linux-3.18.2/arch/arm/boot/dts/Makefile +@@ -441,6 +441,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ + sun7i-a20-cubietruck.dtb \ + sun7i-a20-hummingbird.dtb \ + sun7i-a20-i12-tvbox.dtb \ ++ sun7i-a20-lamobo-r1.dtb \ + sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-micro.dtb \ + sun7i-a20-pcduino3.dtb +Index: linux-3.18.2/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +=================================================================== +--- /dev/null ++++ linux-3.18.2/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +@@ -0,0 +1,235 @@ ++/* ++ * Copyright 2015 Daniel Golle ++ * Copyright 2014 Hans de Goede ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public ++ * License along with this library; if not, write to the Free ++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++/include/ "sun7i-a20.dtsi" ++/include/ "sunxi-common-regulators.dtsi" ++#include ++ ++/ { ++ model = "Lamobo R1"; ++ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; ++ ++ soc@01c00000 { ++ spi0: spi@01c05000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins_a>; ++ status = "okay"; ++ }; ++ ++ mmc0: mmc@01c0f000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 7 10 0>; /* PH10 */ ++ cd-inverted; ++ status = "okay"; ++ }; ++ ++ usbphy: phy@01c13400 { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ usb2_vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++ }; ++ ++ ehci0: usb@01c14000 { ++ status = "okay"; ++ }; ++ ++ ohci0: usb@01c14400 { ++ status = "okay"; ++ }; ++ ++ ahci: sata@01c18000 { ++ target-supply = <®_ahci_5v>; ++ status = "okay"; ++ }; ++ ++ ehci1: usb@01c1c000 { ++ status = "okay"; ++ }; ++ ++ ohci1: usb@01c1c400 { ++ status = "okay"; ++ }; ++ ++ pinctrl@01c20800 { ++ mmc0_cd_pin_lamobo: mmc0_cd_pin@0 { ++ allwinner,pins = "PH10"; ++ allwinner,function = "gpio_in"; ++ allwinner,drive = <0>; ++ allwinner,pull = <1>; ++ }; ++ ++ gmac_power_pin_lamobo: gmac_power_pin@0 { ++ allwinner,pins = "PH23"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ led_pins_lamobo: led_pins@0 { ++ allwinner,pins = "PH2"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <1>; ++ allwinner,pull = <0>; ++ }; ++ }; ++ ++ lradc: lradc@01c22800 { ++ allwinner,chan0-step = <200>; ++ linux,chan0-keycodes = ; ++ status = "okay"; ++ }; ++ ++ ir0: ir@01c21800 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart0: serial@01c28000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart3: serial@01c28c00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart3_pins_b>; ++ status = "okay"; ++ }; ++ ++ uart7: serial@01c29c00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart7_pins_a>; ++ status = "okay"; ++ }; ++ ++ i2c0: i2c@01c2ac00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; ++ ++ axp209: pmic@34 { ++ compatible = "x-powers,axp209"; ++ reg = <0x34>; ++ interrupt-parent = <&nmi_intc>; ++ interrupts = <0 8>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ }; ++ ++ i2c1: i2c@01c2b000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins_a>; ++ status = "okay"; ++ }; ++ ++ i2c2: i2c@01c2b400 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c2_pins_a>; ++ status = "okay"; ++ }; ++ ++ gmac: ethernet@01c50000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_pins_rgmii_a>; ++ phy = <&phy1>; ++ phy-mode = "rgmii"; ++ phy-supply = <®_gmac_3v3>; ++ status = "okay"; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins_lamobo>; ++ ++ green { ++ label = "lamobo:green:usr"; ++ gpios = <&pio 7 24 0>; ++ default-state = "on"; ++ }; ++ }; ++ ++ reg_ahci_5v: ahci-5v { ++ status = "okay"; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ status = "okay"; ++ }; ++ ++ reg_usb2_vbus: usb2-vbus { ++ status = "okay"; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_power_pin_lamobo>; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 7 23 0>; ++ status = "okay"; ++ }; ++}; diff --git a/target/linux/sunxi/profiles/lamobo-r1.mk b/target/linux/sunxi/profiles/lamobo-r1.mk new file mode 100644 index 0000000000..4bc1185209 --- /dev/null +++ b/target/linux/sunxi/profiles/lamobo-r1.mk @@ -0,0 +1,19 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Lamobo_R1 + NAME:=Lamobo R1 + PACKAGES:=\ + uboot-sunxi-Lamobo_R1 kmod-ata-sunxi kmod-rtl8192cu \ + swconfig wpad-mini +endef + +define Profile/Lamobo_R1/Description + Package set optimized for the Lamobo R1 +endef + +$(eval $(call Profile,Lamobo_R1))