From: Álvaro Fernández Rojas Date: Mon, 23 May 2022 18:52:53 +0000 (+0200) Subject: bmips: dgnd3700v2: enable external BCM53125 switch X-Git-Tag: v23.05.0-rc1~710 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=61f3c3b1eebd598b62f03cb2c63dde965624e0f1;p=openwrt%2Fstaging%2Fhauke.git bmips: dgnd3700v2: enable external BCM53125 switch The Netgear DGND3700v2 has an external BCM53125 switch which can now be enabled as a DSA disjoint switch tree setup. Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts b/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts index b99fecaaa6..d0befc2c34 100644 --- a/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts +++ b/target/linux/bmips/dts/bcm6362-netgear-dgnd3700-v2.dts @@ -148,6 +148,58 @@ }; }; +&mdio_ext { + switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + + phy-mode = "rgmii"; + ethernet = <&switch0port4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + &nflash { status = "okay"; @@ -224,8 +276,10 @@ }; &switch0 { + dsa,member = <0 0>; + ports { - port@4 { + switch0port4: port@4 { reg = <4>; label = "extsw"; diff --git a/target/linux/bmips/nand/base-files/etc/board.d/02_network b/target/linux/bmips/nand/base-files/etc/board.d/02_network index e853621665..3134116bc2 100644 --- a/target/linux/bmips/nand/base-files/etc/board.d/02_network +++ b/target/linux/bmips/nand/base-files/etc/board.d/02_network @@ -11,7 +11,7 @@ comtrend,vr-3032u) ;; netgear,dgnd3700-v2) ucidef_set_bridge_device switch - ucidef_set_interface_lan "extsw" + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; esac