From: INAGAKI Hiroshi Date: Mon, 25 Mar 2024 12:39:30 +0000 (+0900) Subject: ramips: add support for ELECOM WMC-S1267GS2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=61e8728d86d7c11e1a5adab4bd37dae6b3b6cf2b;p=openwrt%2Fopenwrt.git ramips: add support for ELECOM WMC-S1267GS2 ELECOM WMC-S1267GS2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) mesh extender, based on MT7621A. This device has almost the same hardware as WMC-M1267GST2. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (Nanya NT5CC128M16JR-EK) - Flash : SPI-NOR 32 MiB (Winbond W25Q256JVFIQ) - WLAN : 2.4/5 GHz 2T2R (MediaTek MT7615D) - Ethernet : 10/100/1000 Mbps x4 - switch : MediaTek MT7530 (SoC) - LEDs/Keys : 6x/6x - UART : through-hole on PCB ("J4") - arrangement: 3.3V, GND, TX, RX from tri-angle marking - settings : 57600n8 - Power : 12 VDC, 1 A Flash instruction using factory image: 1. Boot WMC-S1267GS2 normally 2. Set IP address of the computer to 192.168.2.x 3. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click apply ("適用") button 5. Wait ~120 seconds to complete flashing MAC addresses: LAN : 04:AB:18:xx:xx:9E (Factory, 0xFFF4 (hex)) 2.4 GHz: 04:AB:18:xx:xx:9F 5 GHz : 04:AB:18:xx:xx:A0 (Factory, 0x4 (hex)) Signed-off-by: INAGAKI Hiroshi --- diff --git a/target/linux/ramips/dts/mt7621_elecom_wmc-s1267gs2.dts b/target/linux/ramips/dts/mt7621_elecom_wmc-s1267gs2.dts new file mode 100644 index 0000000000..942fa1cb46 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_elecom_wmc-s1267gs2.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_elecom_wrc-gs-1pci.dtsi" + +/ { + compatible = "elecom,wmc-s1267gs2", "mediatek,mt7621-soc"; + model = "ELECOM WMC-S1267GS2"; + + aliases { + /* + * A MAC address printed to the label is an address of + * 5 GHz band on stock firmware, but there is no + * per-band MAC address support on Linux Kernel and that + * address is not assigned to any wlan devices now. + */ + /delete-property/ label-mac-device; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_fff4>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + status = "disabled"; +}; + +&partitions { + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x1800000>; + }; + + partition@1850000 { + label = "tm_pattern"; + reg = <0x1850000 0x400000>; + read-only; + }; + + partition@1c50000 { + label = "tm_key"; + reg = <0x1c50000 0x100000>; + read-only; + }; + + partition@1d50000 { + label = "nvram"; + reg = <0x1d50000 0xb0000>; + read-only; + }; + + partition@1e00000 { + label = "user_data"; + reg = <0x1e00000 0x200000>; + read-only; + }; +}; + +&wifi { + nvmem-cells = <&macaddr_factory_4 (-1)>; + nvmem-cell-names = "mac-address"; +}; + +&factory { + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_4: macaddr@4 { + compatible = "mac-base"; + reg = <0x4 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_fff4: macaddr@fff4 { + reg = <0xfff4 0x6>; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index a0b6fe9e5f..33fcc805d9 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -998,6 +998,14 @@ define Device/elecom_wmc-m1267gst2 endef TARGET_DEVICES += elecom_wmc-m1267gst2 +define Device/elecom_wmc-s1267gs2 + $(Device/elecom_wrc-gs) + IMAGE_SIZE := 24576k + DEVICE_MODEL := WMC-S1267GS2 + ELECOM_HWNAME := WMC-DLGST2 +endef +TARGET_DEVICES += elecom_wmc-s1267gs2 + define Device/elecom_wrc-1167ghbk2-s $(Device/dsa-migration) IMAGE_SIZE := 15488k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index d932313cf1..2ed8c38732 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -102,17 +102,18 @@ ramips_setup_interfaces() dlink,covr-x1860-a1) ucidef_set_interfaces_lan_wan "ethernet" "internet" ;; + elecom,wmc-s1267gs2|\ + linksys,re6500|\ + netgear,wac104|\ + zyxel,lte3301-plus) + ucidef_set_interface_lan "lan1 lan2 lan3 lan4" + ;; gnubee,gb-pc1) ucidef_set_interface_lan "ethblack ethblue" ;; gnubee,gb-pc2) ucidef_set_interface_lan "ethblack ethblue ethyellow" ;; - linksys,re6500|\ - netgear,wac104|\ - zyxel,lte3301-plus) - ucidef_set_interface_lan "lan1 lan2 lan3 lan4" - ;; mikrotik,routerboard-750gr3) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan" ;;