From: Ansuel Smith Date: Sun, 17 Jun 2018 20:36:46 +0000 (+0200) Subject: mac80211: ath10k add leds support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=61d57a2f88b90ba951012e66c7c6fae9234c97b4;p=openwrt%2Fstaging%2F981213.git mac80211: ath10k add leds support This adds support for leds handled by the wireless chipset. Signed-off-by: Ansuel Smith --- diff --git a/package/kernel/mac80211/patches/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch b/package/kernel/mac80211/patches/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch new file mode 100644 index 0000000000..cb9ecb8574 --- /dev/null +++ b/package/kernel/mac80211/patches/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch @@ -0,0 +1,617 @@ +From: Sebastian Gottschall + +Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based +chipsets with on chipset connected led's using WMI Firmware API. The LED +device will get available named as "ath10k-phyX" at sysfs and can be controlled +with various triggers. adds also debugfs interface for gpio control. + +This patch is specific for OpenWRt base, as is use old backported package +with old wireless source. Support for QCA9984 is removed and a simbol +is added to local-simbol file to export the actually compile the code +with the ATH10K_LEDS simbol. + + +Signed-off-by: Sebastian Gottschall +Reviewed-by: Steve deRosier +[kvalo: major reorg and cleanup] +Signed-off-by: Kalle Valo +Signed-off-by: Ansuel Smith +--- + +v13: + +* only compile tested! + +* fix all checkpatch warnings + +* fix commit log + +* sizeof(struct ath10k_gpiocontrol) -> sizeof(*gpio) + +* unsigned -> unsigned int + +* remove GPIOLIB code, that should be added in a separate patch + +* rename gpio.c to leds.c + +* add leds.h + +* rename some functions: + + ath10k_attach_led() -> ath10k_leds_register() + ath10k_unregister_led() -> ath10k_leds_unregister() + ath10k_reset_led_pin() -> ath10k_leds_start() + +* call ath10k_leds_unregister() before ath10k_thermal_unregister() to preserve ordering + +* call ath10k_leds_start() only from ath10k_core_start() and not from mac.c + +* rename struct ath10k_gpiocontrol as anonymous function under struct + ath10k::leds, no need for memory allocation + +* merge ath10k_add_led() to ath10k_attach_led(), which is it's only caller + +* remove #if IS_ENABLED() checks from most of places, memory savings from those were not worth it + +* Kconfig help text improvement and move it lower in the menu, also don't enable it by default + +* switch to set_brightness_blocking() so that the callback can sleep, + then no need to use ath10k_wmi_cmd_send_nowait() and can take mutex + to access ar->state + +* don't touch ath10k_wmi_pdev_get_temperature() + +* as QCA6174/QCA9377 are not (yet) supported don't add the command to WMI-TLV interface + +* remove debugfs interface, that should be added in another patch + +* cleanup includes + + + drivers/net/wireless/ath/ath10k/Kconfig | 10 +++ + drivers/net/wireless/ath/ath10k/Makefile | 1 + + drivers/net/wireless/ath/ath10k/core.c | 22 +++++++ + drivers/net/wireless/ath/ath10k/core.h | 9 ++- + drivers/net/wireless/ath/ath10k/hw.h | 1 + + drivers/net/wireless/ath/ath10k/leds.c | 103 ++++++++++++++++++++++++++++++ + drivers/net/wireless/ath/ath10k/leds.h | 45 +++++++++++++ + drivers/net/wireless/ath/ath10k/mac.c | 1 + + drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++++++++++ + drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 + + drivers/net/wireless/ath/ath10k/wmi.c | 54 ++++++++++++++++ + drivers/net/wireless/ath/ath10k/wmi.h | 35 ++++++++++ + 12 files changed, 314 insertions(+), 1 deletion(-) + create mode 100644 drivers/net/wireless/ath/ath10k/leds.c + create mode 100644 drivers/net/wireless/ath/ath10k/leds.h +--- a/drivers/net/wireless/ath/ath10k/Kconfig ++++ b/drivers/net/wireless/ath/ath10k/Kconfig +@@ -56,6 +56,16 @@ config ATH10K_DEBUGFS + + If unsure, say Y to make it easier to debug problems. + ++config ATH10K_LEDS ++ bool "Atheros ath10k LED support" ++ depends on ATH10K ++ select MAC80211_LEDS ++ select LEDS_CLASS ++ select NEW_LEDS ++ default y ++ ---help--- ++ This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N. ++ + config ATH10K_SPECTRAL + bool "Atheros ath10k spectral scan support" + depends on ATH10K_DEBUGFS +--- a/drivers/net/wireless/ath/ath10k/Makefile ++++ b/drivers/net/wireless/ath/ath10k/Makefile +@@ -18,6 +18,7 @@ ath10k_core-$(CPTCFG_ATH10K_SPECTRAL) += + ath10k_core-$(CPTCFG_NL80211_TESTMODE) += testmode.o + ath10k_core-$(CPTCFG_ATH10K_TRACING) += trace.o + ath10k_core-$(CPTCFG_ATH10K_THERMAL) += thermal.o ++ath10k_core-$(CPTCFG_ATH10K_LEDS) += leds.o + ath10k_core-$(CPTCFG_MAC80211_DEBUGFS) += debugfs_sta.o + ath10k_core-$(CONFIG_PM) += wow.o + +--- a/local-symbols ++++ b/local-symbols +@@ -144,6 +144,7 @@ ATH10K_DEBUG= + ATH10K_DEBUGFS= + ATH10K_SPECTRAL= + ATH10K_THERMAL= ++ATH10K_LEDS= + ATH10K_TRACING= + ATH10K_DFS_CERTIFIED= + WCN36XX= +--- a/drivers/net/wireless/ath/ath10k/core.c ++++ b/drivers/net/wireless/ath/ath10k/core.c +@@ -32,6 +32,7 @@ + #include "htt.h" + #include "testmode.h" + #include "wmi-ops.h" ++#include "leds.h" + + unsigned int ath10k_debug_mask; + static unsigned int ath10k_cryptmode_param; +@@ -56,6 +57,7 @@ static const struct ath10k_hw_params ath + .id = QCA988X_HW_2_0_VERSION, + .dev_id = QCA988X_2_0_DEVICE_ID, + .name = "qca988x hw2.0", ++ .led_pin = 1, + .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, +@@ -80,6 +82,7 @@ static const struct ath10k_hw_params ath + .id = QCA9887_HW_1_0_VERSION, + .dev_id = QCA9887_1_0_DEVICE_ID, + .name = "qca9887 hw1.0", ++ .led_pin = 1, + .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, +@@ -199,6 +202,7 @@ static const struct ath10k_hw_params ath + .id = QCA99X0_HW_2_0_DEV_VERSION, + .dev_id = QCA99X0_2_0_DEVICE_ID, + .name = "qca99x0 hw2.0", ++ .led_pin = 17, + .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .otp_exe_param = 0x00000700, +@@ -228,6 +232,7 @@ static const struct ath10k_hw_params ath + .id = QCA9984_HW_1_0_DEV_VERSION, + .dev_id = QCA9984_1_0_DEVICE_ID, + .name = "qca9984/qca9994 hw1.0", ++ .led_pin = 17, + .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, +@@ -262,6 +267,7 @@ static const struct ath10k_hw_params ath + .id = QCA9888_HW_2_0_DEV_VERSION, + .dev_id = QCA9888_2_0_DEVICE_ID, + .name = "qca9888 hw2.0", ++ .led_pin = 17, + .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, +@@ -2254,6 +2260,10 @@ int ath10k_core_start(struct ath10k *ar, + if (status) + goto err_hif_stop; + ++ status = ath10k_leds_start(ar); ++ if (status) ++ goto err_hif_stop; ++ + return 0; + + err_hif_stop: +@@ -2471,9 +2481,18 @@ static void ath10k_core_register_work(st + goto err_spectral_destroy; + } + ++ status = ath10k_leds_register(ar); ++ if (status) { ++ ath10k_err(ar, "could not register leds: %d\n", ++ status); ++ goto err_thermal_unregister; ++ } ++ + set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); + return; + ++err_thermal_unregister: ++ ath10k_thermal_unregister(ar); + err_spectral_destroy: + ath10k_spectral_destroy(ar); + err_debug_destroy: +@@ -2515,6 +2534,8 @@ void ath10k_core_unregister(struct ath10 + if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) + return; + ++ ath10k_leds_unregister(ar); ++ + ath10k_thermal_unregister(ar); + /* Stop spectral before unregistering from mac80211 to remove the + * relayfs debugfs file cleanly. Otherwise the parent debugfs tree +--- a/drivers/net/wireless/ath/ath10k/core.h ++++ b/drivers/net/wireless/ath/ath10k/core.h +@@ -24,6 +24,7 @@ + #include + #include + #include ++#include + + #include "htt.h" + #include "htc.h" +@@ -789,7 +790,6 @@ struct ath10k { + u32 low_5ghz_chan; + u32 high_5ghz_chan; + bool ani_enabled; +- + bool p2p; + + struct { +@@ -972,6 +972,13 @@ struct ath10k { + } testmode; + + struct { ++ struct gpio_led wifi_led; ++ struct led_classdev cdev; ++ char label[48]; ++ u32 gpio_state_pin; ++ } leds; ++ ++ struct { + /* protected by data_lock */ + u32 fw_crash_counter; + u32 fw_warm_reset_counter; +--- a/drivers/net/wireless/ath/ath10k/hw.h ++++ b/drivers/net/wireless/ath/ath10k/hw.h +@@ -490,6 +490,7 @@ struct ath10k_hw_params { + const char *name; + u32 patch_load_addr; + int uart_pin; ++ int led_pin; + u32 otp_exe_param; + + /* Type of hw cycle counter wraparound logic, for more info +--- /dev/null ++++ b/drivers/net/wireless/ath/ath10k/leds.c +@@ -0,0 +1,103 @@ ++/* ++ * Copyright (c) 2005-2011 Atheros Communications Inc. ++ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. ++ * Copyright (c) 2018 Sebastian Gottschall ++ * Copyright (c) 2018, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include ++ ++#include "core.h" ++#include "wmi.h" ++#include "wmi-ops.h" ++ ++#include "leds.h" ++ ++static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev, ++ enum led_brightness brightness) ++{ ++ struct ath10k *ar = container_of(led_cdev, struct ath10k, ++ leds.cdev); ++ struct gpio_led *led = &ar->leds.wifi_led; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ if (ar->state != ATH10K_STATE_ON) ++ goto out; ++ ++ ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low; ++ ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin); ++ ++out: ++ mutex_unlock(&ar->conf_mutex); ++ ++ return 0; ++} ++ ++int ath10k_leds_start(struct ath10k *ar) ++{ ++ if (ar->hw_params.led_pin == 0) ++ /* leds not supported */ ++ return 0; ++ ++ /* under some circumstances, the gpio pin gets reconfigured ++ * to default state by the firmware, so we need to ++ * reconfigure it this behaviour has only ben seen on ++ * QCA9984 and QCA99XX devices so far ++ */ ++ ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0, ++ WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE); ++ ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1); ++ ++ return 0; ++} ++ ++int ath10k_leds_register(struct ath10k *ar) ++{ ++ int ret; ++ ++ if (ar->hw_params.led_pin == 0) ++ /* leds not supported */ ++ return 0; ++ ++ snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s", ++ wiphy_name(ar->hw->wiphy)); ++ ar->leds.wifi_led.active_low = 1; ++ ar->leds.wifi_led.gpio = ar->hw_params.led_pin; ++ ar->leds.wifi_led.name = ar->leds.label; ++ ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; ++ ++ ar->leds.cdev.name = ar->leds.label; ++ ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking; ++ ++ /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */ ++ ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger; ++ ++ ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++void ath10k_leds_unregister(struct ath10k *ar) ++{ ++ if (ar->hw_params.led_pin == 0) ++ /* leds not supported */ ++ return; ++ ++ led_classdev_unregister(&ar->leds.cdev); ++} ++ +--- /dev/null ++++ b/drivers/net/wireless/ath/ath10k/leds.h +@@ -0,0 +1,41 @@ ++/* ++ * Copyright (c) 2018, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++#ifndef _LEDS_H_ ++#define _LEDS_H_ ++ ++#include "core.h" ++ ++#ifdef CPTCFG_ATH10K_LEDS ++void ath10k_leds_unregister(struct ath10k *ar); ++int ath10k_leds_start(struct ath10k *ar); ++int ath10k_leds_register(struct ath10k *ar); ++#else ++static inline void ath10k_leds_unregister(struct ath10k *ar) ++{ ++} ++ ++static inline int ath10k_leds_start(struct ath10k *ar) ++{ ++ return 0; ++} ++ ++static inline int ath10k_leds_register(struct ath10k *ar) ++{ ++ return 0; ++} ++ ++#endif ++#endif /* _LEDS_H_ */ +--- a/drivers/net/wireless/ath/ath10k/mac.c ++++ b/drivers/net/wireless/ath/ath10k/mac.c +@@ -32,6 +32,7 @@ + #include "wmi-tlv.h" + #include "wmi-ops.h" + #include "wow.h" ++#include "leds.h" + + /*********/ + /* Rates */ +--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h ++++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h +@@ -197,6 +197,10 @@ struct wmi_ops { + (struct ath10k *ar, + enum wmi_bss_survey_req_type type); + struct sk_buff *(*gen_echo)(struct ath10k *ar, u32 value); ++ struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num, ++ u32 input, u32 pull_type, u32 intr_mode); ++ ++ struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set); + }; + + int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); +@@ -951,6 +955,35 @@ ath10k_wmi_force_fw_hang(struct ath10k * + return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid); + } + ++static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num, ++ u32 input, u32 pull_type, u32 intr_mode) ++{ ++ struct sk_buff *skb; ++ ++ if (!ar->wmi.ops->gen_gpio_config) ++ return -EOPNOTSUPP; ++ ++ skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode); ++ if (IS_ERR(skb)) ++ return PTR_ERR(skb); ++ ++ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid); ++} ++ ++static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set) ++{ ++ struct sk_buff *skb; ++ ++ if (!ar->wmi.ops->gen_gpio_config) ++ return -EOPNOTSUPP; ++ ++ skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set); ++ if (IS_ERR(skb)) ++ return PTR_ERR(skb); ++ ++ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid); ++} ++ + static inline int + ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level) + { +--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c ++++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c +@@ -3619,6 +3619,8 @@ static const struct wmi_ops wmi_tlv_ops + .gen_echo = ath10k_wmi_tlv_op_gen_echo, + .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf, + .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable, ++ /* .gen_gpio_config not implemented */ ++ /* .gen_gpio_output not implemented */ + }; + + static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = { +--- a/drivers/net/wireless/ath/ath10k/wmi.c ++++ b/drivers/net/wireless/ath/ath10k/wmi.c +@@ -6575,6 +6575,49 @@ ath10k_wmi_op_gen_peer_set_param(struct + return skb; + } + ++static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar, ++ u32 gpio_num, u32 input, ++ u32 pull_type, u32 intr_mode) ++{ ++ struct wmi_gpio_config_cmd *cmd; ++ struct sk_buff *skb; ++ ++ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); ++ if (!skb) ++ return ERR_PTR(-ENOMEM); ++ ++ cmd = (struct wmi_gpio_config_cmd *)skb->data; ++ cmd->pull_type = __cpu_to_le32(pull_type); ++ cmd->gpio_num = __cpu_to_le32(gpio_num); ++ cmd->input = __cpu_to_le32(input); ++ cmd->intr_mode = __cpu_to_le32(intr_mode); ++ ++ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n", ++ gpio_num, input, pull_type, intr_mode); ++ ++ return skb; ++} ++ ++static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar, ++ u32 gpio_num, u32 set) ++{ ++ struct wmi_gpio_output_cmd *cmd; ++ struct sk_buff *skb; ++ ++ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); ++ if (!skb) ++ return ERR_PTR(-ENOMEM); ++ ++ cmd = (struct wmi_gpio_output_cmd *)skb->data; ++ cmd->gpio_num = __cpu_to_le32(gpio_num); ++ cmd->set = __cpu_to_le32(set); ++ ++ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n", ++ gpio_num, set); ++ ++ return skb; ++} ++ + static struct sk_buff * + ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id, + enum wmi_sta_ps_mode psmode) +@@ -8076,6 +8119,9 @@ static const struct wmi_ops wmi_ops = { + .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill, + .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, + .gen_echo = ath10k_wmi_op_gen_echo, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, ++ + /* .gen_bcn_tmpl not implemented */ + /* .gen_prb_tmpl not implemented */ + /* .gen_p2p_go_bcn_ie not implemented */ +@@ -8146,6 +8192,8 @@ static const struct wmi_ops wmi_10_1_ops + .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, + .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, + .gen_echo = ath10k_wmi_op_gen_echo, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + /* .gen_bcn_tmpl not implemented */ + /* .gen_prb_tmpl not implemented */ + /* .gen_p2p_go_bcn_ie not implemented */ +@@ -8217,6 +8265,8 @@ static const struct wmi_ops wmi_10_2_ops + .gen_delba_send = ath10k_wmi_op_gen_delba_send, + .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, + .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + /* .gen_pdev_enable_adaptive_cca not implemented */ + }; + +@@ -8287,6 +8337,8 @@ static const struct wmi_ops wmi_10_2_4_o + .gen_pdev_enable_adaptive_cca = + ath10k_wmi_op_gen_pdev_enable_adaptive_cca, + .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + /* .gen_bcn_tmpl not implemented */ + /* .gen_prb_tmpl not implemented */ + /* .gen_p2p_go_bcn_ie not implemented */ +@@ -8362,6 +8414,8 @@ static const struct wmi_ops wmi_10_4_ops + .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info, + .gen_echo = ath10k_wmi_op_gen_echo, + .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + }; + + int ath10k_wmi_attach(struct ath10k *ar) +--- a/drivers/net/wireless/ath/ath10k/wmi.h ++++ b/drivers/net/wireless/ath/ath10k/wmi.h +@@ -2899,6 +2899,41 @@ enum wmi_10_4_feature_mask { + + }; + ++/* WMI_GPIO_CONFIG_CMDID */ ++enum { ++ WMI_GPIO_PULL_NONE, ++ WMI_GPIO_PULL_UP, ++ WMI_GPIO_PULL_DOWN, ++}; ++ ++enum { ++ WMI_GPIO_INTTYPE_DISABLE, ++ WMI_GPIO_INTTYPE_RISING_EDGE, ++ WMI_GPIO_INTTYPE_FALLING_EDGE, ++ WMI_GPIO_INTTYPE_BOTH_EDGE, ++ WMI_GPIO_INTTYPE_LEVEL_LOW, ++ WMI_GPIO_INTTYPE_LEVEL_HIGH ++}; ++ ++/* WMI_GPIO_CONFIG_CMDID */ ++struct wmi_gpio_config_cmd { ++ __le32 gpio_num; /* GPIO number to be setup */ ++ __le32 input; /* 0 - Output/ 1 - Input */ ++ __le32 pull_type; /* Pull type defined above */ ++ __le32 intr_mode; /* Interrupt mode defined above (Input) */ ++} __packed; ++ ++/* WMI_GPIO_OUTPUT_CMDID */ ++struct wmi_gpio_output_cmd { ++ __le32 gpio_num; /* GPIO number to be setup */ ++ __le32 set; /* Set the GPIO pin*/ ++} __packed; ++ ++/* WMI_GPIO_INPUT_EVENTID */ ++struct wmi_gpio_input_event { ++ __le32 gpio_num; /* GPIO number which changed state */ ++} __packed; ++ + struct wmi_ext_resource_config_10_4_cmd { + /* contains enum wmi_host_platform_type */ + __le32 host_platform_config;