From: FUKAUMI Naoki Date: Wed, 14 Aug 2024 21:49:13 +0000 (+0900) Subject: rockchip: add support for Radxa ROCK 3B X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=61878706f9ca334ffa57be3cc28b7bf9aea6eaa6;p=openwrt%2Fstaging%2Fneocturne.git rockchip: add support for Radxa ROCK 3B Radxa ROCK 3B is a Pico-ITX form factor SBC[1] using the Rockchip RK3568(J). Hardware -------- - Rockchip RK3568(J) SoC - Quad A55 CPU - Mali-G52 GPU - 1 TOPS @ INT8 NPU - 2GB/4GB/8GB LPDDR4 RAM - eMMC connector - Micro SD Card slot - NVMe SSD through the M.2 M Key (2-lane PCIe 3.0) - SPI Flash for bootloader - 2x Gigabit ethernet port (one supports PoE with add-on PoE HAT) - 1x M.2 E Key socket with SDIO, UART and USB interfaces - 1x M.2 B Key socket with PCIe, SATA, and USB interfaces - 1x SIM card socket - 1x USB 3.0 Type-A HOST port - 1x USB 3.0 Type-A OTG port - 2x USB 2.0 Type-A HOST ports - 40 Pin GPIO header [1] https://radxa.com/products/rock3/3b Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile index cc834fb3ed..626b058ea5 100644 --- a/package/boot/uboot-rockchip/Makefile +++ b/package/boot/uboot-rockchip/Makefile @@ -228,6 +228,13 @@ define U-Boot/rock-3a-rk3568 radxa_rock-3a endef +define U-Boot/rock-3b-rk3568 + $(U-Boot/rk3568/Default) + NAME:=ROCK 3B + BUILD_DEVICES:= \ + radxa_rock-3b +endef + # RK3588 boards @@ -292,6 +299,7 @@ UBOOT_TARGETS := \ nanopi-r5s-rk3568 \ radxa-e25-rk3568 \ rock-3a-rk3568 \ + rock-3b-rk3568 \ rock5b-rk3588 \ nanopc-t6-rk3588 \ nanopi-r6s-rk3588s \ diff --git a/package/boot/uboot-rockchip/patches/000-backport-upstream-dts-sync.patch b/package/boot/uboot-rockchip/patches/000-backport-upstream-dts-sync.patch index 4996271c59..bd639a683d 100644 --- a/package/boot/uboot-rockchip/patches/000-backport-upstream-dts-sync.patch +++ b/package/boot/uboot-rockchip/patches/000-backport-upstream-dts-sync.patch @@ -2178,3 +2178,787 @@ + uart-has-rtscts; + status = "okay"; +}; +--- /dev/null ++++ b/dts/upstream/src/arm64/rockchip/rk3568-rock-3b.dts +@@ -0,0 +1,781 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++/dts-v1/; ++ ++#include ++#include ++#include ++#include ++#include "rk3568.dtsi" ++ ++/ { ++ model = "Radxa ROCK 3B"; ++ compatible = "radxa,rock-3b", "rockchip,rk3568"; ++ ++ aliases { ++ ethernet0 = &gmac0; ++ ethernet1 = &gmac1; ++ mmc0 = &sdhci; ++ mmc1 = &sdmmc0; ++ mmc2 = &sdmmc2; ++ }; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ hdmi-con { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ ++ ir-receiver { ++ compatible = "gpio-ir-receiver"; ++ gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm3_ir>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led>; ++ ++ led-0 { ++ color = ; ++ default-state = "on"; ++ function = LED_FUNCTION_HEARTBEAT; ++ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ }; ++ ++ /* pi6c pcie clock generator */ ++ vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_pwren_h>; ++ regulator-name = "vcc3v3_pi6c_03"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <10000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc3v3_sys: regulator-3v3-vcc-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc3v3_sys2: regulator-3v3-vcc-sys2 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys2"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc5v0_sys: regulator-5v0-vcc-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc5v0_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++ ++ vcc5v0_usb_host: regulator-5v0-vcc-usb-host { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&usb_host_pwren_h>; ++ regulator-name = "vcc5v0_usb_host"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&usb_otg_pwren_h>; ++ regulator-name = "vcc5v0_usb_otg"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ sdio_pwrseq: sdio-pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ clocks = <&rk809 1>; ++ clock-names = "ext_clock"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wifi_reg_on_h>; ++ post-power-on-delay-ms = <100>; ++ power-off-delay-us = <5000000>; ++ reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; ++ }; ++ ++ sound { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "Analog RK809"; ++ simple-audio-card,mclk-fs = <256>; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&i2s1_8ch>; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&rk809>; ++ }; ++ }; ++}; ++ ++&combphy0 { ++ status = "okay"; ++}; ++ ++&combphy1 { ++ status = "okay"; ++}; ++ ++&combphy2 { ++ status = "okay"; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu2 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu3 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&gmac0 { ++ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; ++ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; ++ clock_in_out = "input"; ++ phy-handle = <&rgmii_phy0>; ++ phy-mode = "rgmii-id"; ++ phy-supply = <&vcc_3v3>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac0_miim ++ &gmac0_tx_bus2 ++ &gmac0_rx_bus2 ++ &gmac0_rgmii_clk ++ &gmac0_rgmii_bus ++ &gmac0_clkinout>; ++ status = "okay"; ++}; ++ ++&gmac1 { ++ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; ++ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; ++ clock_in_out = "input"; ++ phy-handle = <&rgmii_phy1>; ++ phy-mode = "rgmii-id"; ++ phy-supply = <&vcc_3v3>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac1m1_miim ++ &gmac1m1_tx_bus2 ++ &gmac1m1_rx_bus2 ++ &gmac1m1_rgmii_clk ++ &gmac1m1_rgmii_bus ++ &gmac1m1_clkinout>; ++ status = "okay"; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ avdd-0v9-supply = <&vdda0v9_image>; ++ avdd-1v8-supply = <&vcca1v8_image>; ++ status = "okay"; ++}; ++ ++&hdmi_in { ++ hdmi_in_vp0: endpoint { ++ remote-endpoint = <&vp0_out_hdmi>; ++ }; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ ++&hdmi_sound { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ vdd_cpu: regulator@1c { ++ compatible = "tcs,tcs4525"; ++ reg = <0x1c>; ++ fcs,suspend-voltage-selector = <1>; ++ regulator-name = "vdd_cpu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1150000>; ++ regulator-ramp-delay = <2300>; ++ vin-supply = <&vcc5v0_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ rk809: pmic@20 { ++ compatible = "rockchip,rk809"; ++ reg = <0x20>; ++ assigned-clocks = <&cru I2S1_MCLKOUT_TX>; ++ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; ++ #clock-cells = <1>; ++ clocks = <&cru I2S1_MCLKOUT_TX>; ++ clock-names = "mclk"; ++ clock-output-names = "rk809-clkout1", "rk809-clkout2"; ++ interrupt-parent = <&gpio0>; ++ interrupts = ; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; ++ #sound-dai-cells = <0>; ++ system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc3v3_sys>; ++ vcc2-supply = <&vcc3v3_sys>; ++ vcc3-supply = <&vcc3v3_sys>; ++ vcc4-supply = <&vcc3v3_sys>; ++ vcc5-supply = <&vcc3v3_sys>; ++ vcc6-supply = <&vcc3v3_sys>; ++ vcc7-supply = <&vcc3v3_sys>; ++ vcc8-supply = <&vcc3v3_sys>; ++ vcc9-supply = <&vcc3v3_sys>; ++ ++ regulators { ++ vdd_logic: DCDC_REG1 { ++ regulator-name = "vdd_logic"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_gpu: DCDC_REG2 { ++ regulator-name = "vdd_gpu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-initial-mode = <0x2>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vdd_npu: DCDC_REG4 { ++ regulator-name = "vdd_npu"; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8: DCDC_REG5 { ++ regulator-name = "vcc_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda0v9_image: LDO_REG1 { ++ regulator-name = "vdda0v9_image"; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda_0v9: LDO_REG2 { ++ regulator-name = "vdda_0v9"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda0v9_pmu: LDO_REG3 { ++ regulator-name = "vdda0v9_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <900000>; ++ }; ++ }; ++ ++ vccio_acodec: LDO_REG4 { ++ regulator-name = "vccio_acodec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vccio_sd: LDO_REG5 { ++ regulator-name = "vccio_sd"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_pmu: LDO_REG6 { ++ regulator-name = "vcc3v3_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3300000>; ++ }; ++ }; ++ ++ vcca_1v8: LDO_REG7 { ++ regulator-name = "vcca_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcca1v8_pmu: LDO_REG8 { ++ regulator-name = "vcca1v8_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcca1v8_image: LDO_REG9 { ++ regulator-name = "vcca1v8_image"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_3v3: SWITCH_REG1 { ++ regulator-name = "vcc_3v3"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_sd: SWITCH_REG2 { ++ regulator-name = "vcc3v3_sd"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2c5 { ++ status = "okay"; ++ ++ hym8563: rtc@51 { ++ compatible = "haoyu,hym8563"; ++ reg = <0x51>; ++ interrupt-parent = <&gpio0>; ++ interrupts = ; ++ #clock-cells = <0>; ++ clock-output-names = "rtcic_32kout"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rtcic_int_l>; ++ wakeup-source; ++ }; ++}; ++ ++&i2s0_8ch { ++ status = "okay"; ++}; ++ ++&i2s1_8ch { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s1m0_sclktx ++ &i2s1m0_lrcktx ++ &i2s1m0_sdi0 ++ &i2s1m0_sdo0>; ++ rockchip,trcm-sync-tx-only; ++ status = "okay"; ++}; ++ ++&mdio0 { ++ rgmii_phy0: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ reset-assert-us = <20000>; ++ reset-deassert-us = <50000>; ++ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&mdio1 { ++ rgmii_phy1: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ reset-assert-us = <20000>; ++ reset-deassert-us = <50000>; ++ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&pcie2x1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie20m1_pins>; ++ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; ++ vpcie3v3-supply = <&vcc3v3_sys2>; ++ status = "okay"; ++}; ++ ++&pcie30phy { ++ status = "okay"; ++}; ++ ++&pcie3x2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie30x2m1_pins>; ++ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ bluetooth { ++ bt_reg_on_h: bt-reg-on-h { ++ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ bt_wake_host_h: bt-wake-host-h { ++ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ host_wake_bt_h: host-wake-bt-h { ++ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ ir-receiver { ++ pwm3_ir: pwm3-ir { ++ rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ leds { ++ led: led { ++ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pcie { ++ pcie_pwren_h: pcie-pwren-h { ++ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pcie20 { ++ pcie20m1_pins: pcie20m1-pins { ++ rockchip,pins = ++ <2 RK_PD0 4 &pcfg_pull_none>, ++ <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>, ++ <2 RK_PD1 4 &pcfg_pull_none>; ++ }; ++ }; ++ ++ pcie30x2 { ++ pcie30x2m1_pins: pcie30x2m1-pins { ++ rockchip,pins = ++ <2 RK_PD4 4 &pcfg_pull_none>, ++ <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>, ++ <2 RK_PD5 4 &pcfg_pull_none>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int_l: pmic-int-l { ++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ rtc { ++ rtcic_int_l: rtcic-int-l { ++ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ usb { ++ usb_host_pwren_h: usb-host-pwren-h { ++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ usb_otg_pwren_h: usb-otg-pwren-h { ++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ wifi { ++ wifi_reg_on_h: wifi-reg-on-h { ++ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ wifi_wake_host_h: wifi-wake-host-h { ++ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; ++ ++&pmu_io_domains { ++ pmuio1-supply = <&vcc3v3_pmu>; ++ pmuio2-supply = <&vcc3v3_pmu>; ++ vccio1-supply = <&vccio_acodec>; ++ vccio2-supply = <&vcc_1v8>; ++ vccio3-supply = <&vccio_sd>; ++ vccio4-supply = <&vcc_1v8>; ++ vccio5-supply = <&vcc_3v3>; ++ vccio6-supply = <&vcc_1v8>; ++ vccio7-supply = <&vcc_3v3>; ++ status = "okay"; ++}; ++ ++&saradc { ++ vref-supply = <&vcca_1v8>; ++ status = "okay"; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ cap-mmc-highspeed; ++ max-frequency = <200000000>; ++ mmc-hs200-1_8v; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; ++ vmmc-supply = <&vcc_3v3>; ++ vqmmc-supply = <&vcc_1v8>; ++ status = "okay"; ++}; ++ ++&sdmmc0 { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ disable-wp; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; ++ vmmc-supply = <&vcc3v3_sd>; ++ vqmmc-supply = <&vccio_sd>; ++ status = "okay"; ++}; ++ ++&sdmmc2 { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ cap-sdio-irq; ++ keep-power-in-suspend; ++ mmc-pwrseq = <&sdio_pwrseq>; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>; ++ sd-uhs-sdr104; ++ vmmc-supply = <&vcc3v3_sys2>; ++ vqmmc-supply = <&vcc_1v8>; ++ status = "disabled"; ++}; ++ ++&sfc { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ flash@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <104000000>; ++ spi-rx-bus-width = <4>; ++ spi-tx-bus-width = <1>; ++ }; ++}; ++ ++&tsadc { ++ rockchip,hw-tshut-mode = <1>; ++ rockchip,hw-tshut-polarity = <0>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&uart8 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn &uart8m0_rtsn>; ++ uart-has-rtscts; ++ status = "disabled"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; ++ ++&usb_host0_xhci { ++ extcon = <&usb2phy0>; ++ status = "okay"; ++}; ++ ++&usb_host1_xhci { ++ status = "okay"; ++}; ++ ++&usb2phy0 { ++ status = "okay"; ++}; ++ ++&usb2phy0_host { ++ phy-supply = <&vcc5v0_usb_host>; ++ status = "okay"; ++}; ++ ++&usb2phy0_otg { ++ phy-supply = <&vcc5v0_usb_otg>; ++ status = "okay"; ++}; ++ ++&usb2phy1 { ++ status = "okay"; ++}; ++ ++&usb2phy1_otg { ++ phy-supply = <&vcc5v0_usb_host>; ++ status = "okay"; ++}; ++ ++&vop { ++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; ++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; ++ status = "okay"; ++}; ++ ++&vop_mmu { ++ status = "okay"; ++}; ++ ++&vp0 { ++ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { ++ reg = ; ++ remote-endpoint = <&hdmi_in_vp0>; ++ }; ++}; diff --git a/package/boot/uboot-rockchip/patches/005-board-rockchip-Add-Radxa-ROCK-3B.patch b/package/boot/uboot-rockchip/patches/005-board-rockchip-Add-Radxa-ROCK-3B.patch new file mode 100644 index 0000000000..0fe8bfd52d --- /dev/null +++ b/package/boot/uboot-rockchip/patches/005-board-rockchip-Add-Radxa-ROCK-3B.patch @@ -0,0 +1,179 @@ +From e20d57ae7e0c28f2d770a7d18c1501d332e8766a Mon Sep 17 00:00:00 2001 +From: Jonas Karlman +Date: Wed, 31 Jul 2024 07:28:54 +0000 +Subject: [PATCH] board: rockchip: Add Radxa ROCK 3B + +The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form +factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community +version based on the RK3568 SoC and an industrial version based on the +RK3568J SoC. + +Features tested on ROCK 3B 8GB v1.51 (both variants): +- SD-card boot +- eMMC boot +- SPI Flash boot +- Ethernet +- PCIe/NVMe +- USB gadget +- USB host + +Signed-off-by: Jonas Karlman +Tested-by: FUKAUMI Naoki +Reviewed-by: Kever Yang +--- + arch/arm/dts/rk3568-rock-3b-u-boot.dtsi | 15 ++++ + board/rockchip/evb_rk3568/MAINTAINERS | 6 ++ + configs/rock-3b-rk3568_defconfig | 100 ++++++++++++++++++++++++ + doc/board/rockchip/rockchip.rst | 3 +- + 4 files changed, 123 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/dts/rk3568-rock-3b-u-boot.dtsi + create mode 100644 configs/rock-3b-rk3568_defconfig + +--- /dev/null ++++ b/arch/arm/dts/rk3568-rock-3b-u-boot.dtsi +@@ -0,0 +1,15 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++#include "rk356x-u-boot.dtsi" ++ ++&sdhci { ++ mmc-hs400-1_8v; ++ mmc-hs400-enhanced-strobe; ++}; ++ ++&sfc { ++ flash@0 { ++ bootph-pre-ram; ++ bootph-some-ram; ++ }; ++}; +--- a/board/rockchip/evb_rk3568/MAINTAINERS ++++ b/board/rockchip/evb_rk3568/MAINTAINERS +@@ -70,6 +70,12 @@ F: configs/rock-3a-rk3568_defconfig + F: arch/arm/dts/rk3568-rock-3a.dts + F: arch/arm/dts/rk3568-rock-3a-u-boot.dtsi + ++ROCK-3B ++M: Jonas Karlman ++S: Maintained ++F: configs/rock-3b-rk3568_defconfig ++F: arch/arm/dts/rk3568-rock-3b* ++ + ROCK-3C + M: Jonas Karlman + M: Maxim Moskalets +--- /dev/null ++++ b/configs/rock-3b-rk3568_defconfig +@@ -0,0 +1,100 @@ ++CONFIG_ARM=y ++CONFIG_SKIP_LOWLEVEL_INIT=y ++CONFIG_COUNTER_FREQUENCY=24000000 ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_SF_DEFAULT_SPEED=24000000 ++CONFIG_SF_DEFAULT_MODE=0x2000 ++CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-rock-3b" ++CONFIG_ROCKCHIP_RK3568=y ++CONFIG_ROCKCHIP_SPI_IMAGE=y ++CONFIG_SPL_SERIAL=y ++CONFIG_DEBUG_UART_BASE=0xFE660000 ++CONFIG_DEBUG_UART_CLOCK=24000000 ++CONFIG_SPL_SPI_FLASH_SUPPORT=y ++CONFIG_SPL_SPI=y ++CONFIG_SYS_LOAD_ADDR=0xc00800 ++CONFIG_PCI=y ++CONFIG_DEBUG_UART=y ++CONFIG_AHCI=y ++CONFIG_FIT=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_SPL_FIT_SIGNATURE=y ++CONFIG_SPL_LOAD_FIT=y ++CONFIG_LEGACY_IMAGE_FORMAT=y ++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-rock-3b.dtb" ++# CONFIG_DISPLAY_CPUINFO is not set ++CONFIG_DISPLAY_BOARDINFO_LATE=y ++CONFIG_SPL_MAX_SIZE=0x40000 ++CONFIG_SPL_PAD_TO=0x7f8000 ++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set ++CONFIG_SPL_SPI_LOAD=y ++CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 ++CONFIG_SPL_ATF=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_I2C=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_POWEROFF=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_ROCKUSB=y ++CONFIG_CMD_USB_MASS_STORAGE=y ++# CONFIG_CMD_SETEXPR is not set ++CONFIG_CMD_PMIC=y ++CONFIG_CMD_REGULATOR=y ++# CONFIG_SPL_DOS_PARTITION is not set ++CONFIG_SPL_OF_CONTROL=y ++CONFIG_OF_LIVE=y ++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_SPL_DM_SEQ_ALIAS=y ++CONFIG_SPL_REGMAP=y ++CONFIG_SPL_SYSCON=y ++CONFIG_SCSI_AHCI=y ++CONFIG_AHCI_PCI=y ++CONFIG_SPL_CLK=y ++# CONFIG_USB_FUNCTION_FASTBOOT is not set ++CONFIG_ROCKCHIP_GPIO=y ++CONFIG_SYS_I2C_ROCKCHIP=y ++CONFIG_LED=y ++CONFIG_LED_GPIO=y ++CONFIG_MISC=y ++CONFIG_SUPPORT_EMMC_RPMB=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y ++CONFIG_MMC_SDHCI_ROCKCHIP=y ++CONFIG_SF_DEFAULT_BUS=4 ++CONFIG_SPI_FLASH_SFDP_SUPPORT=y ++CONFIG_SPI_FLASH_MACRONIX=y ++CONFIG_SPI_FLASH_XTX=y ++CONFIG_PHY_REALTEK=y ++CONFIG_DWC_ETH_QOS=y ++CONFIG_DWC_ETH_QOS_ROCKCHIP=y ++CONFIG_NVME_PCI=y ++CONFIG_PCIE_DW_ROCKCHIP=y ++CONFIG_PHY_ROCKCHIP_INNO_USB2=y ++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y ++CONFIG_SPL_PINCTRL=y ++CONFIG_DM_PMIC=y ++CONFIG_DM_PMIC_FAN53555=y ++CONFIG_PMIC_RK8XX=y ++CONFIG_REGULATOR_RK8XX=y ++CONFIG_SPL_RAM=y ++CONFIG_SCSI=y ++CONFIG_BAUDRATE=1500000 ++CONFIG_DEBUG_UART_SHIFT=2 ++CONFIG_SYS_NS16550_MEM32=y ++CONFIG_ROCKCHIP_SFC=y ++CONFIG_SYSRESET=y ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_GENERIC=y ++CONFIG_USB_DWC3=y ++CONFIG_USB_DWC3_GENERIC=y ++CONFIG_USB_GADGET=y ++CONFIG_USB_GADGET_DOWNLOAD=y ++CONFIG_USB_FUNCTION_ROCKUSB=y ++CONFIG_ERRNO_STR=y +--- a/doc/board/rockchip/rockchip.rst ++++ b/doc/board/rockchip/rockchip.rst +@@ -118,7 +118,8 @@ List of mainline supported Rockchip boar + - Generic RK3566/RK3568 (generic-rk3568) + - Hardkernel ODROID-M1 (odroid-m1-rk3568) + - Radxa E25 Carrier Board (radxa-e25-rk3568) +- - Radxa ROCK 3 Model A (rock-3a-rk3568) ++ - Radxa ROCK 3A (rock-3a-rk3568) ++ - Radxa ROCK 3B (rock-3b-rk3568) + + * rk3588 + - Rockchip EVB (evb-rk3588) diff --git a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network index 0e3bb8deaf..078ecfaabe 100644 --- a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network +++ b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network @@ -9,7 +9,8 @@ rockchip_setup_interfaces() case "$board" in friendlyarm,nanopc-t6|\ friendlyarm,nanopi-r5c|\ - radxa,e25) + radxa,e25|\ + radxa,rock-3b) ucidef_set_interfaces_lan_wan 'eth0' 'eth1' ;; friendlyarm,nanopi-r2c|\ diff --git a/target/linux/rockchip/image/armv8.mk b/target/linux/rockchip/image/armv8.mk index 6924ceaa0a..99dde6aef1 100644 --- a/target/linux/rockchip/image/armv8.mk +++ b/target/linux/rockchip/image/armv8.mk @@ -140,6 +140,14 @@ define Device/radxa_rock-3a endef TARGET_DEVICES += radxa_rock-3a +define Device/radxa_rock-3b + DEVICE_VENDOR := Radxa + DEVICE_MODEL := ROCK 3B + SOC := rk3568 + DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis +endef +TARGET_DEVICES += radxa_rock-3b + define Device/radxa_rock-3c DEVICE_VENDOR := Radxa DEVICE_MODEL := ROCK 3C diff --git a/target/linux/rockchip/patches-6.6/014-v6.11-arm64-dts-rockchip-Add-Radxa-ROCK-3B.patch b/target/linux/rockchip/patches-6.6/014-v6.11-arm64-dts-rockchip-Add-Radxa-ROCK-3B.patch new file mode 100644 index 0000000000..e93a055c3e --- /dev/null +++ b/target/linux/rockchip/patches-6.6/014-v6.11-arm64-dts-rockchip-Add-Radxa-ROCK-3B.patch @@ -0,0 +1,815 @@ +From 846ef7748fa9124c8eea76e2d5e833fa69b3ef7c Mon Sep 17 00:00:00 2001 +From: Jonas Karlman +Date: Thu, 27 Jun 2024 21:17:31 +0000 +Subject: [PATCH] arm64: dts: rockchip: Add Radxa ROCK 3B + +The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form +factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community +version based on the RK3568 SoC and an industrial version based on the +RK3568J SoC. + +Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. + +Signed-off-by: Jonas Karlman +Link: https://lore.kernel.org/r/20240627211737.1985549-3-jonas@kwiboo.se +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/Makefile | 1 + + .../boot/dts/rockchip/rk3568-rock-3b.dts | 781 ++++++++++++++++++ + 2 files changed, 782 insertions(+) + create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts + +--- a/arch/arm64/boot/dts/rockchip/Makefile ++++ b/arch/arm64/boot/dts/rockchip/Makefile +@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-od + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb ++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts +@@ -0,0 +1,781 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++/dts-v1/; ++ ++#include ++#include ++#include ++#include ++#include "rk3568.dtsi" ++ ++/ { ++ model = "Radxa ROCK 3B"; ++ compatible = "radxa,rock-3b", "rockchip,rk3568"; ++ ++ aliases { ++ ethernet0 = &gmac0; ++ ethernet1 = &gmac1; ++ mmc0 = &sdhci; ++ mmc1 = &sdmmc0; ++ mmc2 = &sdmmc2; ++ }; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ hdmi-con { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ ++ ir-receiver { ++ compatible = "gpio-ir-receiver"; ++ gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm3_ir>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led>; ++ ++ led-0 { ++ color = ; ++ default-state = "on"; ++ function = LED_FUNCTION_HEARTBEAT; ++ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ }; ++ ++ /* pi6c pcie clock generator */ ++ vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_pwren_h>; ++ regulator-name = "vcc3v3_pi6c_03"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <10000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc3v3_sys: regulator-3v3-vcc-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc3v3_sys2: regulator-3v3-vcc-sys2 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys2"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc5v0_sys: regulator-5v0-vcc-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc5v0_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++ ++ vcc5v0_usb_host: regulator-5v0-vcc-usb-host { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&usb_host_pwren_h>; ++ regulator-name = "vcc5v0_usb_host"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&usb_otg_pwren_h>; ++ regulator-name = "vcc5v0_usb_otg"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ sdio_pwrseq: sdio-pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ clocks = <&rk809 1>; ++ clock-names = "ext_clock"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wifi_reg_on_h>; ++ post-power-on-delay-ms = <100>; ++ power-off-delay-us = <5000000>; ++ reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; ++ }; ++ ++ sound { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "Analog RK809"; ++ simple-audio-card,mclk-fs = <256>; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&i2s1_8ch>; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&rk809>; ++ }; ++ }; ++}; ++ ++&combphy0 { ++ status = "okay"; ++}; ++ ++&combphy1 { ++ status = "okay"; ++}; ++ ++&combphy2 { ++ status = "okay"; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu2 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu3 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&gmac0 { ++ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; ++ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; ++ clock_in_out = "input"; ++ phy-handle = <&rgmii_phy0>; ++ phy-mode = "rgmii-id"; ++ phy-supply = <&vcc_3v3>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac0_miim ++ &gmac0_tx_bus2 ++ &gmac0_rx_bus2 ++ &gmac0_rgmii_clk ++ &gmac0_rgmii_bus ++ &gmac0_clkinout>; ++ status = "okay"; ++}; ++ ++&gmac1 { ++ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; ++ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; ++ clock_in_out = "input"; ++ phy-handle = <&rgmii_phy1>; ++ phy-mode = "rgmii-id"; ++ phy-supply = <&vcc_3v3>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac1m1_miim ++ &gmac1m1_tx_bus2 ++ &gmac1m1_rx_bus2 ++ &gmac1m1_rgmii_clk ++ &gmac1m1_rgmii_bus ++ &gmac1m1_clkinout>; ++ status = "okay"; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ avdd-0v9-supply = <&vdda0v9_image>; ++ avdd-1v8-supply = <&vcca1v8_image>; ++ status = "okay"; ++}; ++ ++&hdmi_in { ++ hdmi_in_vp0: endpoint { ++ remote-endpoint = <&vp0_out_hdmi>; ++ }; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ ++&hdmi_sound { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ vdd_cpu: regulator@1c { ++ compatible = "tcs,tcs4525"; ++ reg = <0x1c>; ++ fcs,suspend-voltage-selector = <1>; ++ regulator-name = "vdd_cpu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1150000>; ++ regulator-ramp-delay = <2300>; ++ vin-supply = <&vcc5v0_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ rk809: pmic@20 { ++ compatible = "rockchip,rk809"; ++ reg = <0x20>; ++ assigned-clocks = <&cru I2S1_MCLKOUT_TX>; ++ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; ++ #clock-cells = <1>; ++ clocks = <&cru I2S1_MCLKOUT_TX>; ++ clock-names = "mclk"; ++ clock-output-names = "rk809-clkout1", "rk809-clkout2"; ++ interrupt-parent = <&gpio0>; ++ interrupts = ; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; ++ #sound-dai-cells = <0>; ++ system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc3v3_sys>; ++ vcc2-supply = <&vcc3v3_sys>; ++ vcc3-supply = <&vcc3v3_sys>; ++ vcc4-supply = <&vcc3v3_sys>; ++ vcc5-supply = <&vcc3v3_sys>; ++ vcc6-supply = <&vcc3v3_sys>; ++ vcc7-supply = <&vcc3v3_sys>; ++ vcc8-supply = <&vcc3v3_sys>; ++ vcc9-supply = <&vcc3v3_sys>; ++ ++ regulators { ++ vdd_logic: DCDC_REG1 { ++ regulator-name = "vdd_logic"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_gpu: DCDC_REG2 { ++ regulator-name = "vdd_gpu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-initial-mode = <0x2>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vdd_npu: DCDC_REG4 { ++ regulator-name = "vdd_npu"; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8: DCDC_REG5 { ++ regulator-name = "vcc_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda0v9_image: LDO_REG1 { ++ regulator-name = "vdda0v9_image"; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda_0v9: LDO_REG2 { ++ regulator-name = "vdda_0v9"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda0v9_pmu: LDO_REG3 { ++ regulator-name = "vdda0v9_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <900000>; ++ }; ++ }; ++ ++ vccio_acodec: LDO_REG4 { ++ regulator-name = "vccio_acodec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vccio_sd: LDO_REG5 { ++ regulator-name = "vccio_sd"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_pmu: LDO_REG6 { ++ regulator-name = "vcc3v3_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3300000>; ++ }; ++ }; ++ ++ vcca_1v8: LDO_REG7 { ++ regulator-name = "vcca_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcca1v8_pmu: LDO_REG8 { ++ regulator-name = "vcca1v8_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcca1v8_image: LDO_REG9 { ++ regulator-name = "vcca1v8_image"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_3v3: SWITCH_REG1 { ++ regulator-name = "vcc_3v3"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_sd: SWITCH_REG2 { ++ regulator-name = "vcc3v3_sd"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2c5 { ++ status = "okay"; ++ ++ hym8563: rtc@51 { ++ compatible = "haoyu,hym8563"; ++ reg = <0x51>; ++ interrupt-parent = <&gpio0>; ++ interrupts = ; ++ #clock-cells = <0>; ++ clock-output-names = "rtcic_32kout"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rtcic_int_l>; ++ wakeup-source; ++ }; ++}; ++ ++&i2s0_8ch { ++ status = "okay"; ++}; ++ ++&i2s1_8ch { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s1m0_sclktx ++ &i2s1m0_lrcktx ++ &i2s1m0_sdi0 ++ &i2s1m0_sdo0>; ++ rockchip,trcm-sync-tx-only; ++ status = "okay"; ++}; ++ ++&mdio0 { ++ rgmii_phy0: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ reset-assert-us = <20000>; ++ reset-deassert-us = <50000>; ++ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&mdio1 { ++ rgmii_phy1: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ reset-assert-us = <20000>; ++ reset-deassert-us = <50000>; ++ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&pcie2x1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie20m1_pins>; ++ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; ++ vpcie3v3-supply = <&vcc3v3_sys2>; ++ status = "okay"; ++}; ++ ++&pcie30phy { ++ status = "okay"; ++}; ++ ++&pcie3x2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie30x2m1_pins>; ++ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ bluetooth { ++ bt_reg_on_h: bt-reg-on-h { ++ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ bt_wake_host_h: bt-wake-host-h { ++ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ host_wake_bt_h: host-wake-bt-h { ++ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ ir-receiver { ++ pwm3_ir: pwm3-ir { ++ rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ leds { ++ led: led { ++ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pcie { ++ pcie_pwren_h: pcie-pwren-h { ++ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pcie20 { ++ pcie20m1_pins: pcie20m1-pins { ++ rockchip,pins = ++ <2 RK_PD0 4 &pcfg_pull_none>, ++ <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>, ++ <2 RK_PD1 4 &pcfg_pull_none>; ++ }; ++ }; ++ ++ pcie30x2 { ++ pcie30x2m1_pins: pcie30x2m1-pins { ++ rockchip,pins = ++ <2 RK_PD4 4 &pcfg_pull_none>, ++ <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>, ++ <2 RK_PD5 4 &pcfg_pull_none>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int_l: pmic-int-l { ++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ rtc { ++ rtcic_int_l: rtcic-int-l { ++ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ usb { ++ usb_host_pwren_h: usb-host-pwren-h { ++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ usb_otg_pwren_h: usb-otg-pwren-h { ++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ wifi { ++ wifi_reg_on_h: wifi-reg-on-h { ++ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ wifi_wake_host_h: wifi-wake-host-h { ++ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; ++ ++&pmu_io_domains { ++ pmuio1-supply = <&vcc3v3_pmu>; ++ pmuio2-supply = <&vcc3v3_pmu>; ++ vccio1-supply = <&vccio_acodec>; ++ vccio2-supply = <&vcc_1v8>; ++ vccio3-supply = <&vccio_sd>; ++ vccio4-supply = <&vcc_1v8>; ++ vccio5-supply = <&vcc_3v3>; ++ vccio6-supply = <&vcc_1v8>; ++ vccio7-supply = <&vcc_3v3>; ++ status = "okay"; ++}; ++ ++&saradc { ++ vref-supply = <&vcca_1v8>; ++ status = "okay"; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ cap-mmc-highspeed; ++ max-frequency = <200000000>; ++ mmc-hs200-1_8v; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; ++ vmmc-supply = <&vcc_3v3>; ++ vqmmc-supply = <&vcc_1v8>; ++ status = "okay"; ++}; ++ ++&sdmmc0 { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ disable-wp; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; ++ vmmc-supply = <&vcc3v3_sd>; ++ vqmmc-supply = <&vccio_sd>; ++ status = "okay"; ++}; ++ ++&sdmmc2 { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ cap-sdio-irq; ++ keep-power-in-suspend; ++ mmc-pwrseq = <&sdio_pwrseq>; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>; ++ sd-uhs-sdr104; ++ vmmc-supply = <&vcc3v3_sys2>; ++ vqmmc-supply = <&vcc_1v8>; ++ status = "disabled"; ++}; ++ ++&sfc { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ flash@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <104000000>; ++ spi-rx-bus-width = <4>; ++ spi-tx-bus-width = <1>; ++ }; ++}; ++ ++&tsadc { ++ rockchip,hw-tshut-mode = <1>; ++ rockchip,hw-tshut-polarity = <0>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&uart8 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn &uart8m0_rtsn>; ++ uart-has-rtscts; ++ status = "disabled"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; ++ ++&usb_host0_xhci { ++ extcon = <&usb2phy0>; ++ status = "okay"; ++}; ++ ++&usb_host1_xhci { ++ status = "okay"; ++}; ++ ++&usb2phy0 { ++ status = "okay"; ++}; ++ ++&usb2phy0_host { ++ phy-supply = <&vcc5v0_usb_host>; ++ status = "okay"; ++}; ++ ++&usb2phy0_otg { ++ phy-supply = <&vcc5v0_usb_otg>; ++ status = "okay"; ++}; ++ ++&usb2phy1 { ++ status = "okay"; ++}; ++ ++&usb2phy1_otg { ++ phy-supply = <&vcc5v0_usb_host>; ++ status = "okay"; ++}; ++ ++&vop { ++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; ++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; ++ status = "okay"; ++}; ++ ++&vop_mmu { ++ status = "okay"; ++}; ++ ++&vp0 { ++ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { ++ reg = ; ++ remote-endpoint = <&hdmi_in_vp0>; ++ }; ++}; diff --git a/target/linux/rockchip/patches-6.6/053-v6.9-arm64-dts-rockchip-Add-support-for-NanoPi-R6S.patch b/target/linux/rockchip/patches-6.6/053-v6.9-arm64-dts-rockchip-Add-support-for-NanoPi-R6S.patch index 0f7cd388fe..d0243023fc 100644 --- a/target/linux/rockchip/patches-6.6/053-v6.9-arm64-dts-rockchip-Add-support-for-NanoPi-R6S.patch +++ b/target/linux/rockchip/patches-6.6/053-v6.9-arm64-dts-rockchip-Add-support-for-NanoPi-R6S.patch @@ -17,7 +17,7 @@ Signed-off-by: Heiko Stuebner --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile -@@ -107,4 +107,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-na +@@ -108,4 +108,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-na dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb diff --git a/target/linux/rockchip/patches-6.6/124-rock-3b-add-led-aliases-and-stop-heartbeat.patch b/target/linux/rockchip/patches-6.6/124-rock-3b-add-led-aliases-and-stop-heartbeat.patch new file mode 100644 index 0000000000..420f3ccc4c --- /dev/null +++ b/target/linux/rockchip/patches-6.6/124-rock-3b-add-led-aliases-and-stop-heartbeat.patch @@ -0,0 +1,27 @@ +--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts +@@ -18,6 +18,10 @@ + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc2; ++ led-boot = &led_green; ++ led-failsafe = &led_green; ++ led-running = &led_green; ++ led-upgrade = &led_green; + }; + + chosen { +@@ -47,12 +51,11 @@ + pinctrl-names = "default"; + pinctrl-0 = <&led>; + +- led-0 { ++ led_green: led-0 { + color = ; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "heartbeat"; + }; + }; +