From: Stephen Warren Date: Thu, 24 May 2012 11:38:36 +0000 (+0000) Subject: tegra: whistler: store environment in eMMC X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=616887016d4e82f15fa5acc5d111c16bf2d29843;p=project%2Fbcm63xx%2Fu-boot.git tegra: whistler: store environment in eMMC Store the environment in eMMC, at the end of the second boot sector. This should not conflict with any other eMMC usage: U-Boot is stored well below this location, and the kernel only uses the general area of the eMMC once booted, not the boot sectors. Note: This assumes the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If they didn't, the boot sector layout may be different. However, use of that particular card is standard practice as far as I know. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 51f806a108..ec96cff49b 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -66,8 +66,15 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT -/* Environment not stored */ -#define CONFIG_ENV_IS_NOWHERE +/* + * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes + * the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If + * they didn't, the boot sector layout may be different. However, use of that + * particular card is standard practice as far as I know. + */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USB Host support */ #define CONFIG_USB_EHCI