From: Stefan Roese Date: Wed, 10 May 2006 08:55:16 +0000 (+0200) Subject: Update omap5912osk board support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6080a0eb63dacc85ba703dca90271be866112da6;p=project%2Fbcm63xx%2Fu-boot.git Update omap5912osk board support - Fix OMAP support that omap5912osk compiles in current source tree - Update with code from "http://omap.spectrumdigital.com/osk5912" to fix problems with DDR initialization - Fix timer setup - Use CFI flash driver and support complete 32MB of onboard flash - Add "print_cpuinfo()" and "checkboard()" functions to display CPU (with frequency) and Board infos Patch by Stefan Roese, 10 May 2006 --- diff --git a/CHANGELOG b/CHANGELOG index 0a52639ddc..96c9162c81 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,16 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Update omap5912osk board support + - Fix OMAP support that omap5912osk compiles in current source tree + - Update with code from "http://omap.spectrumdigital.com/osk5912" + to fix problems with DDR initialization + - Fix timer setup + - Use CFI flash driver and support complete 32MB of onboard flash + - Add "print_cpuinfo()" and "checkboard()" functions to display + CPU (with frequency) and Board infos + Patch by Stefan Roese, 10 May 2006 + * Fix watchdog issues for ColdFire boards. * Add M5271EVB board support. diff --git a/board/omap5912osk/lowlevel_init.S b/board/omap5912osk/lowlevel_init.S index 3b9633ad98..d2d429e9ef 100644 --- a/board/omap5912osk/lowlevel_init.S +++ b/board/omap5912osk/lowlevel_init.S @@ -41,6 +41,13 @@ _TEXT_BASE: .globl lowlevel_init lowlevel_init: + /*------------------------------------------------------* + * Ensure i-cache is enabled * + * To configure TC regs without fetching instruction * + *------------------------------------------------------*/ + mrc p15, 0, r0, c1, c0 + orr r0, r0, #0x1000 + mcr p15, 0, r0, c1, c0 /*------------------------------------------------------* *mask all IRQs by setting all bits in the INTMR default* @@ -59,33 +66,34 @@ lowlevel_init: str r1, [r0] /*------------------------------------------------------* - * Set up ARM CLM registers (IDLECT2) * + * Set up ARM CLM registers (IDLECT2) * *------------------------------------------------------*/ ldr r0, REG_ARM_IDLECT2 ldr r1, VAL_ARM_IDLECT2 str r1, [r0] /*------------------------------------------------------* - * Set up ARM CLM registers (IDLECT3) * + * Set up ARM CLM registers (IDLECT3) * *------------------------------------------------------*/ ldr r0, REG_ARM_IDLECT3 ldr r1, VAL_ARM_IDLECT3 str r1, [r0] - - mov r1, #0x01 /* PER_EN bit */ + mov r1, #0x01 /* PER_EN bit */ ldr r0, REG_ARM_RSTCT2 - strh r1, [r0] /* CLKM; Peripheral reset. */ + strh r1, [r0] /* CLKM; Peripheral reset. */ - /* Set CLKM to Sync-Scalable */ - /* I supposedly need to enable the dsp clock before switching */ - mov r1, #0x0000 + /* Set CLKM to Sync-Scalable */ + mov r1, #0x1000 ldr r0, REG_ARM_SYSST - strh r1, [r0] - mov r0, #0x400 -1: - subs r0, r0, #0x1 /* wait for any bubbles to finish */ + + mov r2, #0 +1: cmp r2, #1 + streqh r1, [r0] + add r2, r2, #1 + cmp r2, #0x100 /* wait for any bubbles to finish */ bne 1b + ldr r1, VAL_ARM_CKCTL ldr r0, REG_ARM_CKCTL strh r1, [r0] @@ -107,17 +115,16 @@ lowlevel_init: ldr r1, VAL_DPLL1_CTL ldr r0, REG_DPLL1_CTL strh r1, [r0] - ands r1, r1, #0x10 /* Check if PLL is enabled. */ - beq lock_end /* Do not look for lock if BYPASS selected */ + ands r1, r1, #0x10 /* Check if PLL is enabled. */ + beq lock_end /* Do not look for lock if BYPASS selected */ 2: ldrh r1, [r0] - ands r1, r1, #0x01 /* Check the LOCK bit.*/ - beq 2b /* loop until bit goes hi. */ + ands r1, r1, #0x01 /* Check the LOCK bit.*/ + beq 2b /* loop until bit goes hi. */ lock_end: - /*------------------------------------------------------* - * Turn off the watchdog during init... * + * Turn off the watchdog during init... * *------------------------------------------------------*/ ldr r0, REG_WATCHDOG ldr r1, WATCHDOG_VAL1 @@ -143,30 +150,49 @@ watch2Wait: tst r1, #0x10 bne watch2Wait - /* Set memory timings corresponding to the new clock speed */ + ldr r3, VAL_SDRAM_CONFIG_SDF0 /* Check execution location to determine current execution location * and branch to appropriate initialization code. */ - /* Load physical SDRAM base. */ - mov r0, #0x10000000 - /* Get current execution location. */ - mov r1, pc - /* Compare. */ - cmp r1, r0 - /* Skip over EMIF-fast initialization if running from SDRAM. */ - bge skip_sdram + mov r0, #0x10000000 /* Load physical SDRAM base. */ + mov r1, pc /* Get current execution location. */ + cmp r1, r0 /* Compare. */ + bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */ + + /* identify the device revision, -- TMX or TMP(TMS) */ + ldr r0, REG_DEVICE_ID + ldr r1, [r0] + + ldr r0, VAL_DEVICE_ID_TMP + mov r1, r1, lsl #15 + mov r1, r1, lsr #16 + cmp r0, r1 + bne skip_TMP_Patch + + /* Enable TMP/TMS device new features */ + mov r0, #1 + ldr r1, REG_TC_EMIFF_DOUBLER + str r0, [r1] + + /* Enable new ac parameters */ + mov r0, #0x0b + ldr r1, REG_SDRAM_CONFIG2 + str r0, [r1] + + ldr r3, VAL_SDRAM_CONFIG_SDF1 + +skip_TMP_Patch: /* * Delay for SDRAM initialization. */ - mov r3, #0x1800 /* value should be checked */ + mov r0, #0x1800 /* value should be checked */ 3: - subs r3, r3, #0x1 /* Decrement count */ + subs r0, r0, #0x1 /* Decrement count */ bne 3b - /* * Set SDRAM control values. Disable refresh before MRS command. */ @@ -178,14 +204,15 @@ watch2Wait: /* config register */ ldr r0, REG_SDRAM_CONFIG - ldr r1, SDRAM_CONFIG_VAL - str r1, [r0] + str r3, [r0] /* manual command register */ ldr r0, REG_SDRAM_MANUAL_CMD + /* issue set cke high */ mov r1, #CMD_SDRAM_CKE_SET_HIGH str r1, [r0] + /* issue nop */ mov r1, #CMD_SDRAM_NOP str r1, [r0] @@ -228,25 +255,23 @@ waitMDDR1: str r1, [r0] /* delay loop */ - mov r2, #0x0100 + mov r0, #0x0100 waitMDDR2: - subs r2, r2, #1 + subs r0, r0, #1 bne waitMDDR2 /* * Delay for SDRAM initialization. */ - mov r3, #0x1800 + mov r0, #0x1800 4: - subs r3, r3, #1 /* Decrement count. */ + subs r0, r0, #1 /* Decrement count. */ bne 4b b common_tc skip_sdram: - ldr r0, REG_SDRAM_CONFIG - ldr r1, SDRAM_CONFIG_VAL - str r1, [r0] + str r3, [r0] common_tc: /* slow interface */ @@ -257,10 +282,15 @@ common_tc: ldr r1, VAL_TC_EMIFS_CS1_CONFIG ldr r0, REG_TC_EMIFS_CS1_CONFIG str r1, [r0] /* Chip Select 1 */ + ldr r1, VAL_TC_EMIFS_CS3_CONFIG ldr r0, REG_TC_EMIFS_CS3_CONFIG str r1, [r0] /* Chip Select 3 */ + ldr r1, VAL_TC_EMIFS_DWS + ldr r0, REG_TC_EMIFS_DWS + str r1, [r0] /* Enable EMIFS.RDY for CS1 (ether) */ + #ifdef CONFIG_H2_OMAP1610 /* inserting additional 2 clock cycle hold time for LAN */ ldr r0, REG_TC_EMIFS_CS1_ADVANCED @@ -282,8 +312,9 @@ common_tc: /* the literal pools origin */ .ltorg - -REG_TC_EMIFS_CONFIG: /* 32 bits */ +REG_DEVICE_ID: /* 32 bits */ + .word 0xfffe2004 +REG_TC_EMIFS_CONFIG: .word 0xfffecc0c REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */ .word 0xfffecc10 @@ -293,7 +324,8 @@ REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ .word 0xfffecc18 REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ .word 0xfffecc1c - +REG_TC_EMIFS_DWS: /* 32 bits */ + .word 0xfffecc40 #ifdef CONFIG_H2_OMAP1610 REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */ .word 0xfffecc54 @@ -302,18 +334,17 @@ REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */ /* MPU clock/reset/power mode control registers */ REG_ARM_CKCTL: /* 16 bits */ .word 0xfffece00 - REG_ARM_IDLECT3: /* 16 bits */ .word 0xfffece24 REG_ARM_IDLECT2: /* 16 bits */ .word 0xfffece08 REG_ARM_IDLECT1: /* 16 bits */ .word 0xfffece04 - REG_ARM_RSTCT2: /* 16 bits */ .word 0xfffece14 REG_ARM_SYSST: /* 16 bits */ .word 0xfffece18 + /* DPLL control registers */ REG_DPLL1_CTL: /* 16 bits */ .word 0xfffecf00 @@ -335,6 +366,10 @@ WSPRDOG_VAL2: counter @8192 rows, 10 ns, 8 burst */ REG_SDRAM_CONFIG: .word 0xfffecc20 +REG_SDRAM_CONFIG2: + .word 0xfffecc3c +REG_TC_EMIFF_DOUBLER: /* 32 bits */ + .word 0xfffecc60 /* Operation register */ REG_SDRAM_OPERATION: @@ -356,35 +391,47 @@ REG_SDRAM_EMRS1: REG_DLL_WRT_CONTROL: .word 0xfffecc68 DLL_WRT_CONTROL_VAL: - .word 0x03f00002 + .word 0x03f00002 /* Phase of 72deg, write offset +31 */ /* URD DLL register */ REG_DLL_URD_CONTROL: .word 0xfffeccc0 DLL_URD_CONTROL_VAL: - .word 0x00800002 + .word 0x00800002 /* Phase of 72deg, read offset +31 */ /* LRD DLL register */ REG_DLL_LRD_CONTROL: .word 0xfffecccc +DLL_LRD_CONTROL_VAL: + .word 0x00800002 /* read offset +31 */ REG_WATCHDOG: .word 0xfffec808 +WATCHDOG_VAL1: + .word 0x000000f5 +WATCHDOG_VAL2: + .word 0x000000a0 REG_MPU_LOAD_TIMER: - .word 0xfffec600 + .word 0xfffec504 REG_MPU_CNTL_TIMER: .word 0xfffec500 +VAL_MPU_LOAD_TIMER: + .word 0xffffffff +VAL_MPU_CNTL_TIMER: + .word 0xffffffa1 /* 96 MHz Samsung Mobile DDR */ -SDRAM_CONFIG_VAL: - .word 0x001200f4 +/* Original setting for TMX device */ +VAL_SDRAM_CONFIG_SDF0: + .word 0x0014e6fe -DLL_LRD_CONTROL_VAL: - .word 0x00800002 +/* NEW_SYS_FREQ mode (valid only TMP/TMS devices) */ +VAL_SDRAM_CONFIG_SDF1: + .word 0x0114e6fe VAL_ARM_CKCTL: - .word 0x3000 + .word 0x2000 /* was: 0x3000, now use CLK_REF for timer input */ VAL_DPLL1_CTL: .word 0x2830 @@ -396,7 +443,11 @@ VAL_TC_EMIFS_CS1_CONFIG: VAL_TC_EMIFS_CS2_CONFIG: .word 0x000055f0 VAL_TC_EMIFS_CS3_CONFIG: - .word 0x88011131 + .word 0x88013141 +VAL_TC_EMIFS_DWS: /* Enable EMIFS.RDY for CS1 access (ether) */ + .word 0x000000c0 +VAL_DEVICE_ID_TMP: /* TMP/TMS=0xb65f, TMX=0xb58c */ + .word 0xb65f #endif #ifdef CONFIG_H2_OMAP1610 @@ -407,36 +458,20 @@ VAL_TC_EMIFS_CS1_CONFIG: VAL_TC_EMIFS_CS2_CONFIG: .word 0xf800f22a VAL_TC_EMIFS_CS3_CONFIG: - .word 0x88011131 + .word 0x88013141 VAL_TC_EMIFS_CS1_ADVANCED: .word 0x00000022 #endif -VAL_TC_EMIFF_SDRAM_CONFIG: - .word 0x010290fc -VAL_TC_EMIFF_MRS: - .word 0x00000027 - VAL_ARM_IDLECT1: .word 0x00000400 - VAL_ARM_IDLECT2: .word 0x00000886 VAL_ARM_IDLECT3: .word 0x00000015 -WATCHDOG_VAL1: - .word 0x000000f5 -WATCHDOG_VAL2: - .word 0x000000a0 - -VAL_MPU_LOAD_TIMER: - .word 0xffffffff -VAL_MPU_CNTL_TIMER: - .word 0xffffffa1 - /* command values */ -.equ CMD_SDRAM_NOP, 0x00000000 -.equ CMD_SDRAM_PRECHARGE, 0x00000001 -.equ CMD_SDRAM_AUTOREFRESH, 0x00000002 -.equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007 +.equ CMD_SDRAM_NOP, 0x00000000 +.equ CMD_SDRAM_PRECHARGE, 0x00000001 +.equ CMD_SDRAM_AUTOREFRESH, 0x00000002 +.equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007 diff --git a/board/omap5912osk/omap5912osk.c b/board/omap5912osk/omap5912osk.c index e9e6b0e794..6993b136ee 100644 --- a/board/omap5912osk/omap5912osk.c +++ b/board/omap5912osk/omap5912osk.c @@ -288,3 +288,21 @@ void peripheral_power_enable (void) *SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE; } + +/* + * Check Board Identity + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + + puts("Board: OSK5912"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return (0); +} diff --git a/cpu/arm926ejs/Makefile b/cpu/arm926ejs/Makefile index 203278e9cf..060fd20c65 100644 --- a/cpu/arm926ejs/Makefile +++ b/cpu/arm926ejs/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(CPU).a START = start.o -OBJS = interrupts.o cpu.o +OBJS = interrupts.o cpu.o cpuinfo.o all: .depend $(START) $(LIB) diff --git a/cpu/arm926ejs/cpuinfo.c b/cpu/arm926ejs/cpuinfo.c new file mode 100644 index 0000000000..410a2351c6 --- /dev/null +++ b/cpu/arm926ejs/cpuinfo.c @@ -0,0 +1,245 @@ +/* + * OMAP1 CPU identification code + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) + +#define omap_readw(x) *(volatile unsigned short *)(x) +#define omap_readl(x) *(volatile unsigned long *)(x) + +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +#define OMAP_DIE_ID_0 0xfffe1800 +#define OMAP_DIE_ID_1 0xfffe1804 +#define OMAP_PRODUCTION_ID_0 0xfffe2000 +#define OMAP_PRODUCTION_ID_1 0xfffe2004 +#define OMAP32_ID_0 0xfffed400 +#define OMAP32_ID_1 0xfffed404 + +struct omap_id { + u16 jtag_id; /* Used to determine OMAP type */ + u8 die_rev; /* Processor revision */ + u32 omap_id; /* OMAP revision */ + u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */ +}; + +/* Register values to detect the OMAP version */ +static struct omap_id omap_ids[] = { + { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000}, + { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100}, + { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300}, + { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000}, + { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000}, + { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000}, + { .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00}, + { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00}, + { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00}, + { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00}, + { .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000}, + { .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00}, + { .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00}, + { .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300}, + { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300}, + { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300}, + { .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000}, + { .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000}, + { .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000}, +}; + +/* + * Get OMAP type from PROD_ID. + * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM. + * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense. + * Undocumented register in TEST BLOCK is used as fallback; This seems to + * work on 1510, 1610 & 1710. The official way hopefully will work in future + * processors. + */ +static u16 omap_get_jtag_id(void) +{ + u32 prod_id, omap_id; + + prod_id = omap_readl(OMAP_PRODUCTION_ID_1); + omap_id = omap_readl(OMAP32_ID_1); + + /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */ + if (((prod_id >> 20) == 0) || (prod_id == omap_id)) + prod_id = 0; + else + prod_id &= 0xffff; + + if (prod_id) + return prod_id; + + /* Use OMAP32_ID_1 as fallback */ + prod_id = ((omap_id >> 12) & 0xffff); + + return prod_id; +} + +/* + * Get OMAP revision from DIE_REV. + * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID. + * Undocumented register in the TEST BLOCK is used as fallback. + * REVISIT: This does not seem to work on 1510 + */ +static u8 omap_get_die_rev(void) +{ + u32 die_rev; + + die_rev = omap_readl(OMAP_DIE_ID_1); + + /* Check for broken OMAP_DIE_ID on early 1710 */ + if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id()) + die_rev = 0; + + die_rev = (die_rev >> 17) & 0xf; + if (die_rev) + return die_rev; + + die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf; + + return die_rev; +} + +static unsigned long dpll1(void) +{ + unsigned short pll_ctl_val = omap_readw(DPLL_CTL_REG); + unsigned long rate; + + rate = CONFIG_SYS_CLK_FREQ; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + rate *= (pll_ctl_val & 0xf80) >> 7; + rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + rate /= 2; + break; + default: + rate /= 4; + break; + } + } + + return rate; +} + +static unsigned long armcore(void) +{ + unsigned short arm_ckctl = omap_readw(ARM_CKCTL); + + return (dpll1() >> ((arm_ckctl & 0x0030) >> 4)); +} + +int print_cpuinfo (void) +{ + int i; + u16 jtag_id; + u8 die_rev; + u32 omap_id; + u8 cpu_type; + u32 system_serial_high; + u32 system_serial_low; + u32 system_rev = 0; + + jtag_id = omap_get_jtag_id(); + die_rev = omap_get_die_rev(); + omap_id = omap_readl(OMAP32_ID_0); + +#ifdef DEBUG + printf("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0)); + printf("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n", + omap_readl(OMAP_DIE_ID_1), + (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf); + printf("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0)); + printf("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n", + omap_readl(OMAP_PRODUCTION_ID_1), + omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff); + printf("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0)); + printf("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1)); + printf("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev); +#endif + + system_serial_high = omap_readl(OMAP_DIE_ID_0); + system_serial_low = omap_readl(OMAP_DIE_ID_1); + + /* First check only the major version in a safe way */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (jtag_id == (omap_ids[i].jtag_id)) { + system_rev = omap_ids[i].type; + break; + } + } + + /* Check if we can find the die revision */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) { + system_rev = omap_ids[i].type; + break; + } + } + + /* Finally check also the omap_id */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (jtag_id == omap_ids[i].jtag_id + && die_rev == omap_ids[i].die_rev + && omap_id == omap_ids[i].omap_id) { + system_rev = omap_ids[i].type; + break; + } + } + + /* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */ + cpu_type = system_rev >> 24; + + switch (cpu_type) { + case 0x07: + system_rev |= 0x07; + break; + case 0x03: + case 0x15: + system_rev |= 0x15; + break; + case 0x16: + case 0x17: + system_rev |= 0x16; + break; + case 0x24: + system_rev |= 0x24; + break; + default: + printf("Unknown OMAP cpu type: 0x%02x\n", cpu_type); + } + + printf("CPU: OMAP%04x", system_rev >> 16); + if ((system_rev >> 8) & 0xff) + printf("%x", (system_rev >> 8) & 0xff); +#ifdef DEBUG + printf(" revision %i handled as %02xxx id: %08x%08x", + die_rev, system_rev & 0xff, system_serial_low, system_serial_high); +#endif + printf(" at %ld.%01ld MHz (DPLL1=%ld.%01ld MHz)\n", + armcore() / 1000000, (armcore() / 100000) % 10, + dpll1() / 1000000, (dpll1() / 100000) % 10); + + return 0; +} + +#endif /* #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) */ + diff --git a/include/asm-arm/arch-omap/sizes.h b/include/asm-arm/arch-omap/sizes.h new file mode 100644 index 0000000000..f8d92ca120 --- /dev/null +++ b/include/asm-arm/arch-omap/sizes.h @@ -0,0 +1,52 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size defintions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif + +/* END */ diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 605563aa0a..5db4f52beb 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -35,6 +35,9 @@ #define CONFIG_OMAP1610 1 /* 5912 is same as 1610 */ #define CONFIG_OSK_OMAP5912 1 /* a OSK Board */ +#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ +#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ + /* input clock of PLL */ /* the OMAP5912 OSK has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 @@ -45,11 +48,13 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 /* Required for ramdisk support */ /* * Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -142,27 +147,44 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x01000000 /* Flash Bank #2 */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ /*----------------------------------------------------------------------- - * FLASH and environment organization + * FLASH driver setup */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ + +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ #define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ -/* addr of environment */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ #define CFG_ENV_IS_IN_FLASH 1 +/* addr of environment */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + #define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ #define CFG_ENV_OFFSET 0x20000 /* environment starts here */