From: Daniel Golle Date: Tue, 1 Oct 2024 23:35:07 +0000 (+0100) Subject: generic: net: phy: mxl-gpy: add support for PHY LEDs X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5fd518b6e3d5447acb862cc4119425316e22a1ba;p=openwrt%2Fstaging%2Fblocktrron.git generic: net: phy: mxl-gpy: add support for PHY LEDs Add driver support for PHY LEDs for MaxLinear/Intel GPY Ethernet PHYs. Signed-off-by: Daniel Golle --- diff --git a/target/linux/generic/backport-6.6/843-v6.13-net-phy-mxl-gpy-add-basic-LED-support.patch b/target/linux/generic/backport-6.6/843-v6.13-net-phy-mxl-gpy-add-basic-LED-support.patch new file mode 100644 index 0000000000..2ceaa0ad3d --- /dev/null +++ b/target/linux/generic/backport-6.6/843-v6.13-net-phy-mxl-gpy-add-basic-LED-support.patch @@ -0,0 +1,332 @@ +From 78997e9a5e4d8a4df561e083a92c91ae23010e07 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Tue, 1 Oct 2024 01:17:18 +0100 +Subject: [PATCH] net: phy: mxl-gpy: add basic LED support + +Add basic support for LEDs connected to MaxLinear GPY2xx and GPY115 PHYs. +The PHYs allow up to 4 LEDs to be connected. +Implement controlling LEDs in software as well as netdev trigger offloading +and LED polarity setup. + +The hardware claims to support 16 PWM brightness levels but there is no +documentation on how to use that feature, hence this is not supported. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Link: https://patch.msgid.link/b6ec9050339f8244ff898898a1cecc33b13a48fc.1727741563.git.daniel@makrotopia.org +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/mxl-gpy.c | 218 ++++++++++++++++++++++++++++++++++++++ + 1 file changed, 218 insertions(+) + +--- a/drivers/net/phy/mxl-gpy.c ++++ b/drivers/net/phy/mxl-gpy.c +@@ -38,6 +38,7 @@ + #define PHY_MIISTAT 0x18 /* MII state */ + #define PHY_IMASK 0x19 /* interrupt mask */ + #define PHY_ISTAT 0x1A /* interrupt status */ ++#define PHY_LED 0x1B /* LEDs */ + #define PHY_FWV 0x1E /* firmware version */ + + #define PHY_MIISTAT_SPD_MASK GENMASK(2, 0) +@@ -61,6 +62,11 @@ + PHY_IMASK_ADSC | \ + PHY_IMASK_ANC) + ++#define GPY_MAX_LEDS 4 ++#define PHY_LED_POLARITY(idx) BIT(12 + (idx)) ++#define PHY_LED_HWCONTROL(idx) BIT(8 + (idx)) ++#define PHY_LED_ON(idx) BIT(idx) ++ + #define PHY_FWV_REL_MASK BIT(15) + #define PHY_FWV_MAJOR_MASK GENMASK(11, 8) + #define PHY_FWV_MINOR_MASK GENMASK(7, 0) +@@ -72,6 +78,23 @@ + #define PHY_MDI_MDI_X_CD 0x1 + #define PHY_MDI_MDI_X_CROSS 0x0 + ++/* LED */ ++#define VSPEC1_LED(idx) (1 + (idx)) ++#define VSPEC1_LED_BLINKS GENMASK(15, 12) ++#define VSPEC1_LED_PULSE GENMASK(11, 8) ++#define VSPEC1_LED_CON GENMASK(7, 4) ++#define VSPEC1_LED_BLINKF GENMASK(3, 0) ++ ++#define VSPEC1_LED_LINK10 BIT(0) ++#define VSPEC1_LED_LINK100 BIT(1) ++#define VSPEC1_LED_LINK1000 BIT(2) ++#define VSPEC1_LED_LINK2500 BIT(3) ++ ++#define VSPEC1_LED_TXACT BIT(0) ++#define VSPEC1_LED_RXACT BIT(1) ++#define VSPEC1_LED_COL BIT(2) ++#define VSPEC1_LED_NO_CON BIT(3) ++ + /* SGMII */ + #define VSPEC1_SGMII_CTRL 0x08 + #define VSPEC1_SGMII_CTRL_ANEN BIT(12) /* Aneg enable */ +@@ -827,6 +850,156 @@ static int gpy115_loopback(struct phy_de + return genphy_soft_reset(phydev); + } + ++static int gpy_led_brightness_set(struct phy_device *phydev, ++ u8 index, enum led_brightness value) ++{ ++ int ret; ++ ++ if (index >= GPY_MAX_LEDS) ++ return -EINVAL; ++ ++ /* clear HWCONTROL and set manual LED state */ ++ ret = phy_modify(phydev, PHY_LED, ++ ((value == LED_OFF) ? PHY_LED_HWCONTROL(index) : 0) | ++ PHY_LED_ON(index), ++ (value == LED_OFF) ? 0 : PHY_LED_ON(index)); ++ if (ret) ++ return ret; ++ ++ /* ToDo: set PWM brightness */ ++ ++ /* clear HW LED setup */ ++ if (value == LED_OFF) ++ return phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(index), 0); ++ else ++ return 0; ++} ++ ++static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_LINK) | ++ BIT(TRIGGER_NETDEV_LINK_100) | ++ BIT(TRIGGER_NETDEV_LINK_1000) | ++ BIT(TRIGGER_NETDEV_LINK_2500) | ++ BIT(TRIGGER_NETDEV_RX) | ++ BIT(TRIGGER_NETDEV_TX)); ++ ++static int gpy_led_hw_is_supported(struct phy_device *phydev, u8 index, ++ unsigned long rules) ++{ ++ if (index >= GPY_MAX_LEDS) ++ return -EINVAL; ++ ++ /* All combinations of the supported triggers are allowed */ ++ if (rules & ~supported_triggers) ++ return -EOPNOTSUPP; ++ ++ return 0; ++} ++ ++static int gpy_led_hw_control_get(struct phy_device *phydev, u8 index, ++ unsigned long *rules) ++{ ++ int val; ++ ++ if (index >= GPY_MAX_LEDS) ++ return -EINVAL; ++ ++ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(index)); ++ if (val < 0) ++ return val; ++ ++ if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK10) ++ *rules |= BIT(TRIGGER_NETDEV_LINK_10); ++ ++ if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK100) ++ *rules |= BIT(TRIGGER_NETDEV_LINK_100); ++ ++ if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK1000) ++ *rules |= BIT(TRIGGER_NETDEV_LINK_1000); ++ ++ if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK2500) ++ *rules |= BIT(TRIGGER_NETDEV_LINK_2500); ++ ++ if (FIELD_GET(VSPEC1_LED_CON, val) == (VSPEC1_LED_LINK10 | ++ VSPEC1_LED_LINK100 | ++ VSPEC1_LED_LINK1000 | ++ VSPEC1_LED_LINK2500)) ++ *rules |= BIT(TRIGGER_NETDEV_LINK); ++ ++ if (FIELD_GET(VSPEC1_LED_PULSE, val) & VSPEC1_LED_TXACT) ++ *rules |= BIT(TRIGGER_NETDEV_TX); ++ ++ if (FIELD_GET(VSPEC1_LED_PULSE, val) & VSPEC1_LED_RXACT) ++ *rules |= BIT(TRIGGER_NETDEV_RX); ++ ++ return 0; ++} ++ ++static int gpy_led_hw_control_set(struct phy_device *phydev, u8 index, ++ unsigned long rules) ++{ ++ u16 val = 0; ++ int ret; ++ ++ if (index >= GPY_MAX_LEDS) ++ return -EINVAL; ++ ++ if (rules & BIT(TRIGGER_NETDEV_LINK) || ++ rules & BIT(TRIGGER_NETDEV_LINK_10)) ++ val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK10); ++ ++ if (rules & BIT(TRIGGER_NETDEV_LINK) || ++ rules & BIT(TRIGGER_NETDEV_LINK_100)) ++ val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK100); ++ ++ if (rules & BIT(TRIGGER_NETDEV_LINK) || ++ rules & BIT(TRIGGER_NETDEV_LINK_1000)) ++ val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK1000); ++ ++ if (rules & BIT(TRIGGER_NETDEV_LINK) || ++ rules & BIT(TRIGGER_NETDEV_LINK_2500)) ++ val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK2500); ++ ++ if (rules & BIT(TRIGGER_NETDEV_TX)) ++ val |= FIELD_PREP(VSPEC1_LED_PULSE, VSPEC1_LED_TXACT); ++ ++ if (rules & BIT(TRIGGER_NETDEV_RX)) ++ val |= FIELD_PREP(VSPEC1_LED_PULSE, VSPEC1_LED_RXACT); ++ ++ /* allow RX/TX pulse without link indication */ ++ if ((rules & BIT(TRIGGER_NETDEV_TX) || rules & BIT(TRIGGER_NETDEV_RX)) && ++ !(val & VSPEC1_LED_CON)) ++ val |= FIELD_PREP(VSPEC1_LED_PULSE, VSPEC1_LED_NO_CON) | VSPEC1_LED_CON; ++ ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(index), val); ++ if (ret) ++ return ret; ++ ++ return phy_set_bits(phydev, PHY_LED, PHY_LED_HWCONTROL(index)); ++} ++ ++static int gpy_led_polarity_set(struct phy_device *phydev, int index, ++ unsigned long modes) ++{ ++ bool active_low = false; ++ u32 mode; ++ ++ if (index >= GPY_MAX_LEDS) ++ return -EINVAL; ++ ++ for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) { ++ switch (mode) { ++ case PHY_LED_ACTIVE_LOW: ++ active_low = true; ++ break; ++ default: ++ return -EINVAL; ++ } ++ } ++ ++ return phy_modify(phydev, PHY_LED, PHY_LED_POLARITY(index), ++ active_low ? 0 : PHY_LED_POLARITY(index)); ++} ++ + static struct phy_driver gpy_drivers[] = { + { + PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx), +@@ -844,6 +1017,11 @@ static struct phy_driver gpy_drivers[] = + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, ++ .led_brightness_set = gpy_led_brightness_set, ++ .led_hw_is_supported = gpy_led_hw_is_supported, ++ .led_hw_control_get = gpy_led_hw_control_get, ++ .led_hw_control_set = gpy_led_hw_control_set, ++ .led_polarity_set = gpy_led_polarity_set, + }, + { + .phy_id = PHY_ID_GPY115B, +@@ -862,6 +1040,11 @@ static struct phy_driver gpy_drivers[] = + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy115_loopback, ++ .led_brightness_set = gpy_led_brightness_set, ++ .led_hw_is_supported = gpy_led_hw_is_supported, ++ .led_hw_control_get = gpy_led_hw_control_get, ++ .led_hw_control_set = gpy_led_hw_control_set, ++ .led_polarity_set = gpy_led_polarity_set, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_GPY115C), +@@ -879,6 +1062,11 @@ static struct phy_driver gpy_drivers[] = + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy115_loopback, ++ .led_brightness_set = gpy_led_brightness_set, ++ .led_hw_is_supported = gpy_led_hw_is_supported, ++ .led_hw_control_get = gpy_led_hw_control_get, ++ .led_hw_control_set = gpy_led_hw_control_set, ++ .led_polarity_set = gpy_led_polarity_set, + }, + { + .phy_id = PHY_ID_GPY211B, +@@ -897,6 +1085,11 @@ static struct phy_driver gpy_drivers[] = + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, ++ .led_brightness_set = gpy_led_brightness_set, ++ .led_hw_is_supported = gpy_led_hw_is_supported, ++ .led_hw_control_get = gpy_led_hw_control_get, ++ .led_hw_control_set = gpy_led_hw_control_set, ++ .led_polarity_set = gpy_led_polarity_set, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_GPY211C), +@@ -914,6 +1107,11 @@ static struct phy_driver gpy_drivers[] = + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, ++ .led_brightness_set = gpy_led_brightness_set, ++ .led_hw_is_supported = gpy_led_hw_is_supported, ++ .led_hw_control_get = gpy_led_hw_control_get, ++ .led_hw_control_set = gpy_led_hw_control_set, ++ .led_polarity_set = gpy_led_polarity_set, + }, + { + .phy_id = PHY_ID_GPY212B, +@@ -932,6 +1130,11 @@ static struct phy_driver gpy_drivers[] = + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, ++ .led_brightness_set = gpy_led_brightness_set, ++ .led_hw_is_supported = gpy_led_hw_is_supported, ++ .led_hw_control_get = gpy_led_hw_control_get, ++ .led_hw_control_set = gpy_led_hw_control_set, ++ .led_polarity_set = gpy_led_polarity_set, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_GPY212C), +@@ -949,6 +1152,11 @@ static struct phy_driver gpy_drivers[] = + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, ++ .led_brightness_set = gpy_led_brightness_set, ++ .led_hw_is_supported = gpy_led_hw_is_supported, ++ .led_hw_control_get = gpy_led_hw_control_get, ++ .led_hw_control_set = gpy_led_hw_control_set, ++ .led_polarity_set = gpy_led_polarity_set, + }, + { + .phy_id = PHY_ID_GPY215B, +@@ -967,6 +1175,11 @@ static struct phy_driver gpy_drivers[] = + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, ++ .led_brightness_set = gpy_led_brightness_set, ++ .led_hw_is_supported = gpy_led_hw_is_supported, ++ .led_hw_control_get = gpy_led_hw_control_get, ++ .led_hw_control_set = gpy_led_hw_control_set, ++ .led_polarity_set = gpy_led_polarity_set, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_GPY215C), +@@ -984,6 +1197,11 @@ static struct phy_driver gpy_drivers[] = + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, ++ .led_brightness_set = gpy_led_brightness_set, ++ .led_hw_is_supported = gpy_led_hw_is_supported, ++ .led_hw_control_get = gpy_led_hw_control_get, ++ .led_hw_control_set = gpy_led_hw_control_set, ++ .led_polarity_set = gpy_led_polarity_set, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_GPY241B), diff --git a/target/linux/generic/backport-6.6/844-v6.13-net-phy-mxl-gpy-add-missing-support-for-TRIGGER_NETD.patch b/target/linux/generic/backport-6.6/844-v6.13-net-phy-mxl-gpy-add-missing-support-for-TRIGGER_NETD.patch new file mode 100644 index 0000000000..067c62da11 --- /dev/null +++ b/target/linux/generic/backport-6.6/844-v6.13-net-phy-mxl-gpy-add-missing-support-for-TRIGGER_NETD.patch @@ -0,0 +1,28 @@ +From f95b4725e796b12e5f347a0d161e1d3843142aa8 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Fri, 4 Oct 2024 16:56:35 +0100 +Subject: [PATCH] net: phy: mxl-gpy: add missing support for + TRIGGER_NETDEV_LINK_10 + +The PHY also support 10MBit/s links as well as the corresponding link +indication trigger to be offloaded. Add TRIGGER_NETDEV_LINK_10 to the +supported triggers. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Link: https://patch.msgid.link/cc5da0a989af8b0d49d823656d88053c4de2ab98.1728057367.git.daniel@makrotopia.org +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/mxl-gpy.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/net/phy/mxl-gpy.c ++++ b/drivers/net/phy/mxl-gpy.c +@@ -876,6 +876,7 @@ static int gpy_led_brightness_set(struct + } + + static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_LINK) | ++ BIT(TRIGGER_NETDEV_LINK_10) | + BIT(TRIGGER_NETDEV_LINK_100) | + BIT(TRIGGER_NETDEV_LINK_1000) | + BIT(TRIGGER_NETDEV_LINK_2500) | diff --git a/target/linux/generic/backport-6.6/845-v6.13-net-phy-mxl-gpy-correctly-describe-LED-polarity.patch b/target/linux/generic/backport-6.6/845-v6.13-net-phy-mxl-gpy-correctly-describe-LED-polarity.patch new file mode 100644 index 0000000000..5b88548dd0 --- /dev/null +++ b/target/linux/generic/backport-6.6/845-v6.13-net-phy-mxl-gpy-correctly-describe-LED-polarity.patch @@ -0,0 +1,58 @@ +From eb89c79c1b8f17fc1611540768678e60df89ac42 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Thu, 10 Oct 2024 13:55:17 +0100 +Subject: [PATCH 3/4] net: phy: mxl-gpy: correctly describe LED polarity + +According the datasheet covering the LED (0x1b) register: +0B Active High LEDx pin driven high when activated +1B Active Low LEDx pin driven low when activated + +Make use of the now available 'active-high' property and correctly +reflect the polarity setting which was previously inverted. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Link: https://patch.msgid.link/180ccafa837f09908b852a8a874a3808c5ecd2d0.1728558223.git.daniel@makrotopia.org +Signed-off-by: Paolo Abeni +--- + drivers/net/phy/mxl-gpy.c | 16 ++++++++++++---- + 1 file changed, 12 insertions(+), 4 deletions(-) + +--- a/drivers/net/phy/mxl-gpy.c ++++ b/drivers/net/phy/mxl-gpy.c +@@ -981,7 +981,7 @@ static int gpy_led_hw_control_set(struct + static int gpy_led_polarity_set(struct phy_device *phydev, int index, + unsigned long modes) + { +- bool active_low = false; ++ bool force_active_low = false, force_active_high = false; + u32 mode; + + if (index >= GPY_MAX_LEDS) +@@ -990,15 +990,23 @@ static int gpy_led_polarity_set(struct p + for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) { + switch (mode) { + case PHY_LED_ACTIVE_LOW: +- active_low = true; ++ force_active_low = true; ++ break; ++ case PHY_LED_ACTIVE_HIGH: ++ force_active_high = true; + break; + default: + return -EINVAL; + } + } + +- return phy_modify(phydev, PHY_LED, PHY_LED_POLARITY(index), +- active_low ? 0 : PHY_LED_POLARITY(index)); ++ if (force_active_low) ++ return phy_set_bits(phydev, PHY_LED, PHY_LED_POLARITY(index)); ++ ++ if (force_active_high) ++ return phy_clear_bits(phydev, PHY_LED, PHY_LED_POLARITY(index)); ++ ++ unreachable(); + } + + static struct phy_driver gpy_drivers[] = { diff --git a/target/linux/generic/hack-6.6/765-mxl-gpy-control-LED-reg-from-DT.patch b/target/linux/generic/hack-6.6/765-mxl-gpy-control-LED-reg-from-DT.patch index fd2a327811..041f05e59b 100644 --- a/target/linux/generic/hack-6.6/765-mxl-gpy-control-LED-reg-from-DT.patch +++ b/target/linux/generic/hack-6.6/765-mxl-gpy-control-LED-reg-from-DT.patch @@ -31,45 +31,21 @@ Signed-off-by: David Bauer #include #include #include -@@ -38,6 +39,7 @@ - #define PHY_MIISTAT 0x18 /* MII state */ - #define PHY_IMASK 0x19 /* interrupt mask */ - #define PHY_ISTAT 0x1A /* interrupt status */ -+#define PHY_LED 0x1B /* LED control */ - #define PHY_FWV 0x1E /* firmware version */ - - #define PHY_MIISTAT_SPD_MASK GENMASK(2, 0) -@@ -61,10 +63,15 @@ - PHY_IMASK_ADSC | \ - PHY_IMASK_ANC) - -+#define PHY_LED_NUM_LEDS 4 -+ - #define PHY_FWV_REL_MASK BIT(15) - #define PHY_FWV_MAJOR_MASK GENMASK(11, 8) - #define PHY_FWV_MINOR_MASK GENMASK(7, 0) - -+/* LED */ -+#define VSPEC1_LED(x) (0x1 + x) -+ - #define PHY_PMA_MGBT_POLARITY 0x82 - #define PHY_MDI_MDI_X_MASK GENMASK(1, 0) - #define PHY_MDI_MDI_X_NORMAL 0x3 -@@ -270,10 +277,39 @@ out: +@@ -293,10 +294,39 @@ out: return ret; } +static int gpy_led_write(struct phy_device *phydev) +{ + struct device_node *node = phydev->mdio.dev.of_node; -+ u32 led_regs[PHY_LED_NUM_LEDS]; ++ u32 led_regs[GPY_MAX_LEDS]; + int i, ret; + u16 val = 0xff00; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return 0; + -+ if (of_property_read_u32_array(node, "mxl,led-config", led_regs, PHY_LED_NUM_LEDS)) ++ if (of_property_read_u32_array(node, "mxl,led-config", led_regs, GPY_MAX_LEDS)) + return 0; + + if (of_property_read_bool(node, "mxl,led-drive-vdd")) @@ -79,7 +55,7 @@ Signed-off-by: David Bauer + phy_write(phydev, PHY_LED, val); + + /* Write LED register values */ -+ for (i = 0; i < PHY_LED_NUM_LEDS; i++) { ++ for (i = 0; i < GPY_MAX_LEDS; i++) { + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(i), (u16)led_regs[i]); + if (ret < 0) + return ret; diff --git a/target/linux/mediatek/patches-6.6/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch b/target/linux/mediatek/patches-6.6/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch index 99d0a0dbc2..252263ad11 100644 --- a/target/linux/mediatek/patches-6.6/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch +++ b/target/linux/mediatek/patches-6.6/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch @@ -14,7 +14,7 @@ Signed-off-by: Daniel Golle --- a/drivers/net/phy/mxl-gpy.c +++ b/drivers/net/phy/mxl-gpy.c -@@ -385,8 +385,11 @@ static bool gpy_2500basex_chk(struct phy +@@ -402,8 +402,11 @@ static bool gpy_2500basex_chk(struct phy phydev->speed = SPEED_2500; phydev->interface = PHY_INTERFACE_MODE_2500BASEX; @@ -28,7 +28,7 @@ Signed-off-by: Daniel Golle return true; } -@@ -437,6 +440,14 @@ static int gpy_config_aneg(struct phy_de +@@ -454,6 +457,14 @@ static int gpy_config_aneg(struct phy_de u32 adv; int ret; @@ -43,7 +43,7 @@ Signed-off-by: Daniel Golle if (phydev->autoneg == AUTONEG_DISABLE) { /* Configure half duplex with genphy_setup_forced, * because genphy_c45_pma_setup_forced does not support. -@@ -559,6 +570,8 @@ static int gpy_update_interface(struct p +@@ -576,6 +587,8 @@ static int gpy_update_interface(struct p switch (phydev->speed) { case SPEED_2500: phydev->interface = PHY_INTERFACE_MODE_2500BASEX; @@ -52,7 +52,7 @@ Signed-off-by: Daniel Golle ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL, VSPEC1_SGMII_CTRL_ANEN, 0); if (ret < 0) { -@@ -572,7 +585,7 @@ static int gpy_update_interface(struct p +@@ -589,7 +602,7 @@ static int gpy_update_interface(struct p case SPEED_100: case SPEED_10: phydev->interface = PHY_INTERFACE_MODE_SGMII;