From: Jouni Malinen Date: Wed, 10 Aug 2011 20:54:35 +0000 (+0300) Subject: nl80211/cfg80211: Add crypto settings into NEW_BEACON X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5fb628e9105eef6796789b1ae93289e1566ccdf0;p=openwrt%2Fstaging%2Fblogic.git nl80211/cfg80211: Add crypto settings into NEW_BEACON This removes need from drivers to parse the beacon tail/head data to figure out what crypto settings are to be used in AP mode in case the Beacon and Probe Response frames are fully constructed in the driver/firmware. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 227ee9a0ff1a..580fcdceed2c 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -163,7 +163,10 @@ * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. * Following attributes are provided for drivers that generate full Beacon * and Probe Response frames internally: %NL80211_ATTR_SSID, - * %NL80211_ATTR_HIDDEN_SSID. + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, + * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE. * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, * parameters are like for %NL80211_CMD_SET_BEACON. * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it @@ -845,18 +848,20 @@ enum nl80211_commands { * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT * event (u16) * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating - * that protected APs should be used. + * that protected APs should be used. This is also used with NEW_BEACON to + * indicate that the BSS is to use protection. * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to - * indicate which unicast key ciphers will be used with the connection + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON + * to indicate which unicast key ciphers will be used with the connection * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate - * which group key cipher will be used with the connection (a u32). - * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate - * which WPA version(s) the AP we want to associate with is using + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which group key cipher will be used with the connection (a + * u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which WPA version(s) the AP we want to associate with is using * (a u32 with flags from &enum nl80211_wpa_versions). - * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate - * which key management algorithm(s) to use (an array of u32). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which key management algorithm(s) to use (an array of u32). * * @NL80211_ATTR_REQ_IE: (Re)association request information elements as * sent out by the card, for ROAM and successful CONNECT events. diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 9ee93e7f0e31..6fcd0bf4dc62 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -333,6 +333,36 @@ struct survey_info { s8 noise; }; +/** + * struct cfg80211_crypto_settings - Crypto settings + * @wpa_versions: indicates which, if any, WPA versions are enabled + * (from enum nl80211_wpa_versions) + * @cipher_group: group key cipher suite (or 0 if unset) + * @n_ciphers_pairwise: number of AP supported unicast ciphers + * @ciphers_pairwise: unicast key cipher suites + * @n_akm_suites: number of AKM suites + * @akm_suites: AKM suites + * @control_port: Whether user space controls IEEE 802.1X port, i.e., + * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is + * required to assume that the port is unauthorized until authorized by + * user space. Otherwise, port is marked authorized by default. + * @control_port_ethertype: the control port protocol that should be + * allowed through even on unauthorized ports + * @control_port_no_encrypt: TRUE to prevent encryption of control port + * protocol frames. + */ +struct cfg80211_crypto_settings { + u32 wpa_versions; + u32 cipher_group; + int n_ciphers_pairwise; + u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; + int n_akm_suites; + u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; + bool control_port; + __be16 control_port_ethertype; + bool control_port_no_encrypt; +}; + /** * struct beacon_parameters - beacon parameters * @@ -350,6 +380,9 @@ struct survey_info { * user space) * @ssid_len: length of @ssid * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames + * @crypto: crypto settings + * @privacy: the BSS uses privacy + * @auth_type: Authentication type (algorithm) */ struct beacon_parameters { u8 *head, *tail; @@ -358,6 +391,9 @@ struct beacon_parameters { const u8 *ssid; size_t ssid_len; enum nl80211_hidden_ssid hidden_ssid; + struct cfg80211_crypto_settings crypto; + bool privacy; + enum nl80211_auth_type auth_type; }; /** @@ -912,36 +948,6 @@ struct cfg80211_bss { const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); -/** - * struct cfg80211_crypto_settings - Crypto settings - * @wpa_versions: indicates which, if any, WPA versions are enabled - * (from enum nl80211_wpa_versions) - * @cipher_group: group key cipher suite (or 0 if unset) - * @n_ciphers_pairwise: number of AP supported unicast ciphers - * @ciphers_pairwise: unicast key cipher suites - * @n_akm_suites: number of AKM suites - * @akm_suites: AKM suites - * @control_port: Whether user space controls IEEE 802.1X port, i.e., - * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is - * required to assume that the port is unauthorized until authorized by - * user space. Otherwise, port is marked authorized by default. - * @control_port_ethertype: the control port protocol that should be - * allowed through even on unauthorized ports - * @control_port_no_encrypt: TRUE to prevent encryption of control port - * protocol frames. - */ -struct cfg80211_crypto_settings { - u32 wpa_versions; - u32 cipher_group; - int n_ciphers_pairwise; - u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; - int n_akm_suites; - u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; - bool control_port; - __be16 control_port_ethertype; - bool control_port_no_encrypt; -}; - /** * struct cfg80211_auth_request - Authentication request data * diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index fbb63d3ddc78..6e57a3afb609 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -23,6 +23,12 @@ #include "nl80211.h" #include "reg.h" +static bool nl80211_valid_auth_type(enum nl80211_auth_type auth_type); +static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev, + struct genl_info *info, + struct cfg80211_crypto_settings *settings, + int cipher_limit); + static int nl80211_pre_doit(struct genl_ops *ops, struct sk_buff *skb, struct genl_info *info); static void nl80211_post_doit(struct genl_ops *ops, struct sk_buff *skb, @@ -2039,6 +2045,21 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } + params.privacy = !!info->attrs[NL80211_ATTR_PRIVACY]; + + if (info->attrs[NL80211_ATTR_AUTH_TYPE]) { + params.auth_type = nla_get_u32( + info->attrs[NL80211_ATTR_AUTH_TYPE]); + if (!nl80211_valid_auth_type(params.auth_type)) + return -EINVAL; + } else + params.auth_type = NL80211_AUTHTYPE_AUTOMATIC; + + err = nl80211_crypto_settings(rdev, info, ¶ms.crypto, + NL80211_MAX_NR_CIPHER_SUITES); + if (err) + return err; + call = rdev->ops->add_beacon; break; case NL80211_CMD_SET_BEACON: