From: Greg Rose Date: Thu, 1 Jul 2010 13:38:16 +0000 (+0000) Subject: igb: Use only a single Tx queue in SR-IOV mode X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5fa8517f038d51d571981fb495206cc30ed91b06;p=openwrt%2Fstaging%2Fblogic.git igb: Use only a single Tx queue in SR-IOV mode The 82576 expects the second rx queue in any pool to receive L2 switch loop back packets sent from the second tx queue in another pool. The 82576 VF driver does not enable the second rx queue so if the PF driver sends packets destined to a VF from its second tx queue then the VF driver will never see them. In SR-IOV mode limit the number of tx queues used by the PF driver to one. This patch fixes a bug reported in which the PF cannot communciate with the VF and should be considered for 2.6.34 stable. CC: stable@kernel.org Signed-off-by: Greg Rose Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 3881918f5382..e79689eeb1fe 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -630,9 +630,6 @@ static void igb_cache_ring_register(struct igb_adapter *adapter) for (; i < adapter->rss_queues; i++) adapter->rx_ring[i]->reg_idx = rbase_offset + Q_IDX_82576(i); - for (; j < adapter->rss_queues; j++) - adapter->tx_ring[j]->reg_idx = rbase_offset + - Q_IDX_82576(j); } case e1000_82575: case e1000_82580: @@ -996,7 +993,10 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter) /* Number of supported queues. */ adapter->num_rx_queues = adapter->rss_queues; - adapter->num_tx_queues = adapter->rss_queues; + if (adapter->vfs_allocated_count) + adapter->num_tx_queues = 1; + else + adapter->num_tx_queues = adapter->rss_queues; /* start with one vector for every rx queue */ numvecs = adapter->num_rx_queues;